WorldWideScience

Sample records for references drawings installation

  1. 37 CFR 1.74 - Reference to drawings.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Reference to drawings. 1.74... Reference to drawings. When there are drawings, there shall be a brief description of the several views of the drawings and the detailed description of the invention shall refer to the different views by...

  2. 30 CFR 77.212 - Draw-off tunnel ventilation fans; installation.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Draw-off tunnel ventilation fans; installation... UNDERGROUND COAL MINES Surface Installations § 77.212 Draw-off tunnel ventilation fans; installation. When fans are used to ventilate draw-off tunnels the fans shall be: (a) Installed on the surface; (b...

  3. 48 CFR 552.211-72 - Reference to Specifications in Drawings.

    Science.gov (United States)

    2010-10-01

    ... Specifications in Drawings. 552.211-72 Section 552.211-72 Federal Acquisition Regulations System GENERAL SERVICES....211-72 Reference to Specifications in Drawings. As prescribed in 511.204(a), insert the following clause: References to Specifications in Drawings (FEB 1996) If military or other drawings are made a part...

  4. Thinking inside the box: Spatial frames of reference for drawing in Williams syndrome and typical development.

    Science.gov (United States)

    Hudson, Kerry D; Farran, Emily K

    2017-09-01

    Successfully completing a drawing relies on the ability to accurately impose and manipulate spatial frames of reference for the object that is being drawn and for the drawing space. Typically developing (TD) children use cues such as the page boundary as a frame of reference to guide the orientation of drawn lines. Individuals with Williams syndrome (WS) typically produce incohesive drawings; this is proposed to reflect a local processing bias. Across two studies, we provide the first investigation of the effect of using a frame of reference when drawing simple lines and shapes in WS and TD groups (matched for non-verbal ability). Individuals with WS (N=17 Experiment 1; N=18 Experiment 2) and TD children matched by non-verbal ability drew single lines (Experiment One) and whole shapes (Experiment Two) within a neutral, incongruent or congruent frame. The angular deviation of the drawn line/shape, relative to the model line/shape, was measured. Both groups were sensitive to spatial frames of reference when drawing single lines and whole shapes, imposed by a frame around the drawing space. A local processing bias in WS cannot explain poor drawing performance in WS. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  5. Reference levels for assays in opened installations of industrial radiography

    International Nuclear Information System (INIS)

    Leocadio, Joao C.; Tauhata, Luiz; Crispim, Verginia R.

    2001-01-01

    This work had as objectives to analyze the facilities open of industrial x-ray to obtain the distribution of doses in the operators and present proposed for the reference levels. The results of the monitoring revealed an improvement of the radiation protection conditions in the facilities and that the risk of potential exposure was reduced. The advantage of the proposed reference levels is that the supervisors would enlarge the frequency of audits in the facilities opened to accomplish the investigations and interventions.The facilities open with 'bunkers' presented distributions with 95% of the doses below 0,2 mSv and the distributions of the facilities with cordoned area they had 75% of the doses below 0,4 mSv. (author)

  6. FY 1989 report on the results of the development of the entrained bed coal gasification power plant. Part 3. Fabrication/installation of pilot plant (Fabrication/installation drawings and fabrication/installation pictures - 1/2); 1989 nendo seika hokokusho. Funryusho sekitan gaska hatsuden plant kaihatsu - Sono 3. Pilot plant seisaku suetsuke hen (Seisaku suetsukezu oyobi seisaku suetsuke shashin) (1/2)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-03-01

    For the purpose of establishing the technology of the integrated coal gasification combined cycle power generation, the fabrication, installation work, etc. were conducted of a 200t/d entrained bed coal gasification pilot plant, and drawings of fabrication/installation in the FY 1989 were summarized. In fabrication/installation drawings, drawings of the following were included: layout of the total system and the yard, gasifier facilities (assembly drawing of the pressure part of gasifier, drawing of machinery arrangement of gasifier facilities, system diagram of raw coal receiving device, system diagram of pulverized coal feed equipment, system diagram of char feed equipment, etc.), gas refining facilities - dry desulfurizer (assembly drawing of desulfurizing agent carrying filter, assembly drawing of regeneration tower filter, structural drawing of SO{sub 2} reduction tower filter, assembly drawing of start-up heater, etc.), gas refining facilities - dry dust removal system (assembly drawing of No.1 dust separation filter, installation drawing of elevator, etc.), gas turbine facilities (cross section of gas turbine, front view of gas turbine, structural cross section of gas turbogenerator, etc.), actual-pressure/actual-size combustor test equipment (structural drawing of test stand, structural drawing of exhaust temperature reduction device, assembly/sectioned drawing of low-pressure air compressor, etc.) (NEDO)

  7. FY 1989 report on the results of the development of the entrained bed coal gasification power plant. Part 3. Fabrication/installation of pilot plant (Fabrication/installation drawings and fabrication/installation pictures - 2/2); 1989 nendo seika hokokusho. Funryusho sekitan gaska hatsuden plant kaihatsu - Sono 3. Pilot plant seisaku suetsuke hen (Seisaku suetsukezu oyobi seisaku suetsuke shashin) (2/2)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-03-01

    For the purpose of establishing the technology of the integrated coal gasification combined cycle power generation, the fabrication, installation work, etc. were conducted of a 200t/d entrained bed coal gasification pilot plant, and fabrication/installation drawings and fabrication/installation pictures were summarized. In fabrication/installation drawings, drawings of the following were included: safety environmental equipment (total system diagram, layout scheme drawing, layout of electric room equipment, layout of control equipment room, etc.), total control system (structural drawing of the total control system, outline drawing of operation control panel, operator console of the integrated load pressure control system, operator console of the integrated sequential control system, central control panel, etc.), 66kV/6.9kV indoor switching station facilities (layout of equipment of indoor switching station facilities, outline drawing of the main transformer, outline drawing of cooler control panel of the main transformer, etc.), common facilities (total layout, diagram of the equipment cooling water pipe system, diagram of the fire-extinguishing water pipe system, etc.) In pictures of fabrication/installation, pictures of the following were included: gasifier equipment, gas refining facilities, gas turbine facilities, actual-pressure/actual-size combustor test equipment, safety environmental equipment, total control system, common facilities, etc. (NEDO)

  8. FY 1990 report on the results of the development of the entrained bed coal gasification power plant. Part 3. Fabrication/installation of pilot plant (Fabrication/installation drawings and fabrication/installation pictures - 2/2); 1990 nendo seika hokokusho. Funryusho sekitan gaska hatsuden plant kaihatsu - Sono 3. Pilot plant seisaku suetsuke hen (Seisaku suetsukezu oyobi seisaku suetsuke shashin) (2/2)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-03-01

    For the purpose of establishing the technology of the integrated coal gasification combined cycle power generation, the fabrication, installation work, etc. were conducted of a 200t/d entrained bed coal gasification pilot plant, and fabrication/installation drawings and fabrication/installation pictures were summarized. In fabrication/installation drawings, drawings of the following were included: actual-pressure/actual-size combustor test equipment (structural drawing of exhaust temperature reducing device, structural drawing of hot air device, system diagram of piping, etc.), safety environmental equipment (total system diagram, layout of electric room equipment, layout of control equipment room, etc.), total control system (structural drawing of the total control system, front view of auxiliary panel of safety environment equipment, etc.), 66kV/6.9kV indoor switching station facilities (layout of equipment of indoor switching station facilities, outline drawing of the main transformer, outline drawing of gas circuit breaker, etc.), common facilities (total layout, diagram of the nitrogen gas pipe system, system diagram of utility equipment, etc.) In pictures of fabrication/installation, pictures of the following were included: state of the construction work, gasifier equipment, gas refining facilities, gas turbine facilities, actual-pressure/actual-size combustor test equipment, safety environmental equipment, total control system, 66kV/6.9kV indoor switching station facilities, common facilities. (NEDO)

  9. A reference device for evaluating the thermal behavior of installed multilayered wall containing a phase change material

    International Nuclear Information System (INIS)

    Pagliolico, S.L.; Sassi, G.; Cascone, Y.; Bongiovanni, R.M.

    2015-01-01

    Highlights: • Thermal analysis of installed wallboards embedding phase change material layer. • Simple devices and real conditions for thermal analysis toward a standardization. • Scanning calorimetric measurements as initial condition for data regression. • Bias correction of calorimetric measurements data by installation factors. • Practical approach to identify a reliable thermal curve for capacitive wallboards. - Abstract: Thermal inertia of lightweight building envelopes can be improved including phase change materials in multilayered wallboards. The thermal modeling of buildings for design purposes needs a robust description of the thermal properties of installed phase change materials. A standard method would improve the thermal characterization of commercial products. The aim of the study is to develop a simple methodology to obtain reliable thermal data for phase change materials integrated in multilayered wallboards. The methodology modifies differential scanning calorimetry measurements on phase change material by installation factors to obtain the apparent specific heat vs. temperature for the wallboard layer embedding phase change material. Simple cubic cells were realized as reference devices to simulate a confined environment. A dynamic model of heat transfer was developed to simulate the thermal behavior of devices. Installation factors were calculated by regression of the monitored temperatures inside and outside the devices operating under real environmental conditions. The apparent specific heat of phase change material, measured by differential scanning calorimetry at different rates, resulted in a spread of curves vs. temperature. Mean curves were used as initial condition for regression. The mean calculation method did not significantly affect the installed resulted curve. A unique curve of apparent specific heat vs. temperature best fit data measured over a wide range of experimental devices and conditions. Good regression

  10. Cost update: Technology, safety, and costs of decommissioning reference independent spent fuel storage installations

    International Nuclear Information System (INIS)

    Miles, T.L.

    1994-07-01

    The cost estimates originally developed in NUREG/CR-2210 for decommissioning five conceptual Independent Spent Fuel Storage Installations (ISFSIs) and their supporting ancillaries (hot cell and transporter) are updated from 1981 to 1993 dollars. The costs for labor and materials increased approximately at the rate of inflation, the cost of energy increased more slowly than the rate of inflation, and the cost of low-level radioactive waste disposal increased much more rapidly than the rate of inflation. A methodology and a formula are presented for estimating the cost of decommissioning the ISFSIs at some future time, based on these current cost estimates. The formula contains essentially the same elements as the formula given in 10 CFR 50.75 for escalating the decommissioning costs for nuclear power reactors to some future time

  11. Root Cause Analysis Following an Event at a Nuclear Installation: Reference Manual

    International Nuclear Information System (INIS)

    2015-01-01

    Following an event at a nuclear installation, it is important to determine accurately its root causes so that effective corrective actions can be implemented. As stated in IAEA Safety Standards Series No. SF-1, Fundamental Safety Principles: “Processes must be put in place for the feedback and analysis of operating experience”. If this process is completed effectively, the probability of a similar event occurring is significantly reduced. Guidance on how to establish and implement such a process is given in IAEA Safety Standards Series No. NS-G-2.11, A System for the Feedback of Experience from Events in Nuclear Installations. To cater for the diverse nature of operating experience events, several different root cause analysis (RCA) methodologies and techniques have been developed for effective investigation and analysis. An event here is understood as any unanticipated sequence of occurrences that results in, or potentially results in, consequences to plant operation and safety. RCA is not a topic uniquely relevant to event investigators: knowledge of the concepts enhances the learning characteristics of the whole organization. This knowledge also makes a positive contribution to nuclear safety and helps to foster a culture of preventing event occurrence. This publication allows organizations to deepen their knowledge of these methodologies and techniques and also provides new organizations with a broad overview of the RCA process. It is the outcome of a coordinated effort involving the participation of experts from nuclear organizations, the energy industry and research centres in several Member States. This publication also complements IAEA Services Series No. 10, PROSPER Guidelines: Guidelines for Peer Review and for Plant Self- Assessment of Operational Experience Feedback Process, and is intended to form part of a suite of publications developing the principles set forth in these guidelines. In addition to the information and description of RCA

  12. Root Cause Analysis Following an Event at a Nuclear Installation: Reference Manual. Companion CD

    International Nuclear Information System (INIS)

    2015-01-01

    Following an event at a nuclear installation, it is important to determine accurately its root causes so that effective corrective actions can be implemented. As stated in IAEA Safety Standards Series No. SF-1, Fundamental Safety Principles: “Processes must be put in place for the feedback and analysis of operating experience”. If this process is completed effectively, the probability of a similar event occurring is significantly reduced. Guidance on how to establish and implement such a process is given in IAEA Safety Standards Series No. NS-G-2.11, A System for the Feedback of Experience from Events in Nuclear Installations. To cater for the diverse nature of operating experience events, several different root cause analysis (RCA) methodologies and techniques have been developed for effective investigation and analysis. An event here is understood as any unanticipated sequence of occurrences that results in, or potentially results in, consequences to plant operation and safety. RCA is not a topic uniquely relevant to event investigators: knowledge of the concepts enhances the learning characteristics of the whole organization. This knowledge also makes a positive contribution to nuclear safety and helps to foster a culture of preventing event occurrence. This publication allows organizations to deepen their knowledge of these methodologies and techniques and also provides new organizations with a broad overview of the RCA process. It is the outcome of a coordinated effort involving the participation of experts from nuclear organizations, the energy industry and research centres in several Member States. This publication also complements IAEA Services Series No. 10, PROSPER Guidelines: Guidelines for Peer Review and for Plant Self- Assessment of Operational Experience Feedback Process, and is intended to form part of a suite of publications developing the principles set forth in these guidelines. In addition to the information and description of RCA

  13. BATING A REFERENCE INSTALLATION BASED ON CONTROLLED-POTENTIAL COULOMETRY METOD IN THE FRAME OF IMPROVING THE STATE PRIMARY STANDARD GET 176 AND ITS MEASUREMENT CAPABILITIES

    Directory of Open Access Journals (Sweden)

    V. M. Zyskin

    2016-01-01

    Full Text Available The results of developing of reference installation, based on a controlled-potential coulometry, in the frame of improving the State primary standard of the units of mass (molar fraction and mass (molar concentration of a component in the liquid and solid substances and materials GET 176 are presented. The physical principles of controlled-potential coulometry, content and metrological characteristics of the developed installation are considered. Measurement results of copper, iron and lead contents in the certified reference materials of metals' solutions and CRM of brass produced by BAM, Germany, obtained using reference installation are given.

  14. Drawing Inventors

    Science.gov (United States)

    Szekely, George

    2012-01-01

    Children are drawing inventors. Their art is certainly not what most adults think of as drawing. Almost instinctively, kids know that drawing is everywhere--that they can draw with almost anything, and that innumerable surfaces can be converted for art use. Teaching drawing is showing interest and enthusiasm for kids' drawing inventions--instead…

  15. Annotated bibliography of selected references on shoreline barrier island deposits with emphasis on Patrick Draw Field, Sweetwater County, Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    Rawn-Schatzinger, V.; Schatzinger, R.A.

    1993-07-01

    This bibliography contains 290 annotated references on barrier island and associated depositional environments and reservoirs. It is not an exhaustive compilation of all references on the subject, but rather selected papers on barrier islands, and the depositional processes of formation. Papers that examine the morphology and internal architecture of barrier island deposits, exploration and development technologies are emphasized. Papers were selected that aid in understanding reservoir architecture and engineering technologies to help maximize recovery efficiency from barrier island oil reservoirs. Barrier islands from Wyoming, Montana and the Rocky Mountains basins are extensively covered.

  16. The French market of electrical equipment and installation. Control over energy consumption, environmental law and new markets to be conquered draw perspectives for the sector

    International Nuclear Information System (INIS)

    2012-12-01

    This article presents the content of a market study which aimed at identifying the size and dynamics of the French industry of electrical equipment and installation, at comparing financial performance of equipment manufacturers and of installation major companies, at analysing strategies developed by operators to take benefit of growth opportunities in the field of energy efficiency, at identifying new markets to be conquered, and at anticipating capitalistic evolutions. Fifteen companies are presented and analysed within this perspective: ABB, Alstom, Areva, ETDE, General Electric, GDF Suez, the Energy pole of Eiffage, Legrand, Nexans, Rexel, Schneider Electric, Siemens, Sonepar, Spie, and Vinci Energies

  17. Encountering Drawing

    Science.gov (United States)

    Gregory, Nuala

    2017-01-01

    This article divides into two roughly equal parts, both of which aim to address the "act" rather than the "art" of drawing. The second part focuses on a theoretical discussion of drawing. The first bears on a number of themes including the role of drawing in colonial history, drawing and data collection, and drawing and memory.…

  18. The latest electrical installation (I)

    International Nuclear Information System (INIS)

    Won, Jong Su

    1976-04-01

    This book deals with the latest electrical installation. The contents of this book are construction electrical installation, regulations related electrical installation, foundation and principle of wiring, main line feeder, lighting installation, power of wiring, main line feeder, lighting installation, power installation, method to read structure drawing for electrical construct drawing electric lamp wiring diagram, working drawing, material and tools and method of construction of electrical installation on types of wiring construction, metallic conduit, rigid poly-vinyl conduit wiring, bus duct work, cable work and insulation out of metal lathed.

  19. Thinking Drawing

    Science.gov (United States)

    Adams, Eileen

    2017-01-01

    This article draws heavily on the author's critical autobiography: "Eileen Adams: Agent of Change." It presents evidence of the value of drawing as a medium for learning, particularly in art and design, and argues that drawing is a useful educational tool. The premise is that drawing makes you think. This article explains various…

  20. Mechanical drawing

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Ho Seon; Lee, Geun Hui

    2004-04-15

    This book deals with how to read and draw the mechanical drawing, which includes the basic of drawing like purpose, kinds, and criterion, projection, special projection drawing, omission of the figure, section, and types of section, dimensioning method, writing way of allowable limit size, tolerance of regular size, parts list and assembling drawing, fitting, mechanical elements like screw, key, pin, rivet, spring, bearing, pipe, valve, welding, geometric tolerance and mechanical materials.

  1. Architectural Drawing

    DEFF Research Database (Denmark)

    Steinø, Nicolai

    2018-01-01

    In a time of computer aided design, computer graphics and parametric design tools, the art of architectural drawing is in a state of neglect. But design and drawing are inseparably linked in ways which often go unnoticed. Essentially, it is very difficult, if not impossible, to conceive of a design...... is that computers can represent graphic ideas both faster and better than most medium-skilled draftsmen, drawing in design is not only about representing final designs. In fact, several steps involving the capacity to draw lie before the representation of a final design. Not only is drawing skills an important...... prerequisite for learning about the nature of existing objects and spaces, and thus to build a vocabulary of design. It is also a prerequisite for both reflecting and communicating about design ideas. In this paper, a taxonomy of notation, reflection, communication and presentation drawing is presented...

  2. Agile Drawing

    DEFF Research Database (Denmark)

    Kruse Aagaard, Anders; Lahmy, Maya

    2014-01-01

    This paper aims to discuss the expanding territory of the architectural drawing through digital fabrication processes and with this angle suggest an experimental practice in research and education. At two workshops held throughout June 2014 this approach and mind-set was presented to 2nd year...... on the correlation between tool and drawing. The output of the workshop is considered one accumulated body of drawings and artefacts, mapping some aspect of the method put forward in a tangible materialised approach....

  3. Bad Drawing

    OpenAIRE

    Burgoyne, Greig

    2016-01-01

    "Only when we move do we see the chains" - Rosa Luxemburg Bad drawing / paper cell is a site-specific drawing performance commissioned for The Prison Drawing Project, Scarborough jail, Yorkshire, presented as a film grafted onto the space that is the cell. It takes the notion of drawing as an act of covering and form of measurement, in an immersive act of attempted liberation. Measuring using rolls of paper, the film chronicles what could be seen as a bad day wallpapering a space, no ass...

  4. Prize Draw

    CERN Multimedia

    Staff Association

    2014-01-01

      Prize draw Go Sport vouchers 393 members of the Staff Association participated in our free prize draw in July where they could win one of the thirty Go Sport vouchers of 50 euros. The thirty winners have been contacted and can come and collect their voucher from the Staff Association Secretariat.

  5. Border installations

    International Nuclear Information System (INIS)

    Lenaerts, Koen

    1988-01-01

    Border installations cover all nuclear plants located near the border with a neighbouring state. However, the actual distance depends on the context. The distance can vary considerably. Also the prohibition on siting near a heavily populated area also defines the actual distance variably. The distance criteria may be modified by other factors of topography, prevailing climate and so on. Various examples which illustrate the problems are given. For example, the Creys-Melville nuclear power plant is 80km from Geneva and the Cattonam installation is 12km from the French border with Luxembourg and Germany. The Cattenom case is explained and the legal position within the European Institutions is discussed. The French licensing procedures for nuclear power stations are described with special reference to the Cattenom power plant. Border installations are discussed in the context of European Community Law and Public International Law. (U.K.)

  6. Machine drawing

    CERN Document Server

    Narayana, KL; Reddy, K Venkata

    2006-01-01

    About the Book: Written by three distinguished authors with ample academic and teaching experience, this textbook, meant for diploma and degree students of Mechanical Engineering as well as those preparing for AMIE examination, incorporates the latest standards. The new edition includes the features of assembly drawings, part drawings and computer-aided drawings to cater to the needs of students pursuing various courses. The text of the new edition has been thoroughly revised to include new concepts and practices in the subject. It should prove an ideal textbook. Contents: Introduction

  7. DrawFromDrawings: 2D Drawing Assistance via Stroke Interpolation with a Sketch Database.

    Science.gov (United States)

    Matsui, Yusuke; Shiratori, Takaaki; Aizawa, Kiyoharu

    2017-07-01

    We present DrawFromDrawings, an interactive drawing system that provides users with visual feedback for assistance in 2D drawing using a database of sketch images. Following the traditional imitation and emulation training from art education, DrawFromDrawings enables users to retrieve and refer to a sketch image stored in a database and provides them with various novel strokes as suggestive or deformation feedback. Given regions of interest (ROIs) in the user and reference sketches, DrawFromDrawings detects as-long-as-possible (ALAP) stroke segments and the correspondences between user and reference sketches that are the key to computing seamless interpolations. The stroke-level interpolations are parametrized with the user strokes, the reference strokes, and new strokes created by warping the reference strokes based on the user and reference ROI shapes, and the user study indicated that the interpolation could produce various reasonable strokes varying in shapes and complexity. DrawFromDrawings allows users to either replace their strokes with interpolated strokes (deformation feedback) or overlays interpolated strokes onto their strokes (suggestive feedback). The other user studies on the feedback modes indicated that the suggestive feedback enabled drawers to develop and render their ideas using their own stroke style, whereas the deformation feedback enabled them to finish the sketch composition quickly.

  8. Drawing images or Architectural drawing

    Directory of Open Access Journals (Sweden)

    Amparo Bernal López-Sanvicente

    2013-10-01

    Full Text Available In this article we will discuss how the aesthetic values, that the digital imaging provide, has influenced in drawing and architecture in a historical reading of the evolution of each means of architecture expression. In painting art and photography have been happening genres and styles that have adopted criteria of one or another discipline. When photography became independent from painting as an artistic discipline, its relationship to the architecture affected both the acceptance of its stylistic canon and the broadcast area. With technological development and the emergence of the new concept of digital imaging, it has become an indispensable tool in the whole process of contemporary architecture, which should not contaminate the true sense of the architectural drawing.

  9. Nobel drawings

    CERN Multimedia

    Michel Blanc

    2009-01-01

    1. The Universe in One Drawing (G. Smoot Physics 2006) 2. Superfluid Properties (R. Richardson Physics 1996) 3. The Asymptotic Freedom of the Quark (David Gross, Physics 2004) 4. Understanding Superfluidity (Anthony Legget, Physics 2003) 5. Taming Infinities (G. 't Hooft, Physics 1999) 6. Homo Diagrammaticus (M. Veltman, Physics 1999) 7. A Tale Of Two Liquids (D. Osheroff, Physics 1996) 8. Wire Proliferation (G. Charpak, Physics 1992) 9. High Temperature Superconductivity (G. Bednorz, Physics 1987) 10. Atomic Cuisine (courtesy of C. Rubbia, Physics 1984) 11. Colliding Charm (S. Ting, Physics 1976) 12. The Bubble Chamber ( D. Glaser, Physics 1960) 13. The Narrow Resonance of the J-Psi (B. Richter, Physics 1976) 14. Stochastic Cooling (S. Van der Meer, Physics 1984) 15. The Good Anomaly (J Steinberger, Physics 1988) 16. Quark Somewhere on the White Paper (R. Taylor, Physics 1990) 17. The Tau of Particle Physics (M. Perl, 1995) 18. NMR Spectroscopy (K. Wuethrich, Chemistry 2002) 19. Coherent States (R....

  10. Solar heating and domestic hot water system installed at North Dallas High School

    Science.gov (United States)

    1980-01-01

    The solar energy system located at the North Dallas High School, Dallas, Texas is discussed. The system is designed as a retrofit in a three story with basement, concrete frame high school building. Extracts from the site files, specification references for solar modification to existing building heating and domestic hot water systems, drawings, installation, operation and maintenance instructions are included.

  11. Electrical installation calculations basic

    CERN Document Server

    Kitcher, Christopher

    2013-01-01

    All the essential calculations required for basic electrical installation workThe Electrical Installation Calculations series has proved an invaluable reference for over forty years, for both apprentices and professional electrical installation engineers alike. The book provides a step-by-step guide to the successful application of electrical installation calculations required in day-to-day electrical engineering practice. A step-by-step guide to everyday calculations used on the job An essential aid to the City & Guilds certificates at Levels 2 and 3Fo

  12. Electrical installation calculations advanced

    CERN Document Server

    Kitcher, Christopher

    2013-01-01

    All the essential calculations required for advanced electrical installation workThe Electrical Installation Calculations series has proved an invaluable reference for over forty years, for both apprentices and professional electrical installation engineers alike. The book provides a step-by-step guide to the successful application of electrical installation calculations required in day-to-day electrical engineering practiceA step-by-step guide to everyday calculations used on the job An essential aid to the City & Guilds certificates at Levels 2 and 3For apprentices and electrical installatio

  13. Drawing evaluation report for sampling equipment drawings

    International Nuclear Information System (INIS)

    WILSON, G.W.

    1999-01-01

    This document presents the results of a task to evaluate Tank Waste Remediation System (TWRS) sampling equipment drawings and identifies drawings category as either essential, support, or general drawings. This report completes the drawing evaluation task as outlined in Engineering Task Plan For Truck 3 and 4 Drawing Compliance and Evaluation (Wilson, 1997). The scope of this report is limited to an evaluation and identification of drawing category for drawings of certain tank waste sampling equipment for which the TRWS Characterization Project has been assigned custody, including: vapor sampling, grab sampling, auger sampling, and all core sampling equipment (see LMHC Task Order 304). This report does not address drawings for other waste tank deployed equipment systems having similar assigned custody, such as, Light Duty Utility Arm (LDUA), Cone Penetrometer system, or Long Length Contaminated Equipment (LLCE). The LDUA drawings are addressed in the Characterization Equipment Essential Drawings (HNF 1998). The Cone Penetrometer system drawings which are vendor drawings (not H- series) is not currently turned over to operations for deployment. The LLCE equipment was just recently assigned to Characterization Project and were not included in the original scope for this evaluation and will be addressed in the evaluation update scheduled for fiscal year 1999

  14. Flat-plate solar collector - installation package

    Science.gov (United States)

    1978-01-01

    Package includes installation, operation and maintenance manual for collector, analysis of safety hazards, special handling instructions, materials list, installation drawings, and warranty and certification statement. Manual includes instructions for roof preparation and for preparing collector for installation. Several pages are devoted to major and minor repairs.

  15. Engineering drawing field verification program. Revision 3

    International Nuclear Information System (INIS)

    Ulk, P.F.

    1994-01-01

    Safe, efficient operation of waste tank farm facilities is dependent in part upon the availability of accurate, up-to-date plant drawings. Accurate plant drawings are also required in support of facility upgrades and future engineering remediation projects. This supporting document establishes the procedure for performing a visual field verification of engineering drawings, the degree of visual observation being performed and documenting the results. A copy of the drawing attesting to the degree of visual observation will be paginated into the released Engineering Change Notice (ECN) documenting the field verification for future retrieval and reference. All waste tank farm essential and support drawings within the scope of this program will be converted from manual to computer aided drafting (CAD) drawings. A permanent reference to the field verification status will be placed along the right border of the CAD-converted drawing, referencing the revision level, at which the visual verification was performed and documented

  16. Installing Omeka

    Directory of Open Access Journals (Sweden)

    Jonathan Reeve

    2016-07-01

    Full Text Available Omeka.net is a useful service for Omeka beginners, but there are a few reasons why you might want to install your own copy of Omeka. Reasons include: * Upgrades. By installing Omeka yourself, you can use the latest versions of Omeka as soon as they’re released, without having to wait for Omeka.net to upgrade their system. * Plugins and themes. You can install any plugin or theme you want, without being restricted to those provided by Omeka.net. * Customizations. You can buy a custom domain name, and customize your code to achieve your desired functionality. * Control. You have control over your own backups, and you can update the server yourself so that its security is always up-to-date. * Price. There are many low-cost Virtual Private Servers (VPSs now, some of which cost only $5 per month. * Storage. Many shared hosting providers now offer unlimited storage. This is useful if you have a large media library. In this tutorial, we’ll be entering a few commands on the command line. This tutorial assumes no prior knowledge of the command line, but if you want a concise primer, consult the Programming Historian introduction to BASH. There are other ways of installing Omeka, of course, some using exclusively GUI tools. Some hosting providers even offer “one-click installs” via their control panels. Many of those methods, however, will install older versions of Omeka which are then harder to upgrade and maintain. The method outlined below may not be the easiest way to install Omeka, but it will give you some good practice with using the command line, which is a skill that will be useful if you want to manually upgrade your install, or manually install other web frameworks. (For example, this installation method is very similar to WordPress’s “Five-Minute Install”. There are four steps to this process, and it should take about an hour.

  17. 7 CFR 1755.510 - Construction and assembly unit drawings.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Construction and assembly unit drawings. 1755.510..., AND STANDARD CONTRACT FORMS § 1755.510 Construction and assembly unit drawings. (a) The construction and assembly unit drawings in this section shall be used by borrowers to assist the installer in...

  18. Drawing Evaluation Report for Sampling Equipment Drawings

    International Nuclear Information System (INIS)

    BOGER, R.M.

    1999-01-01

    This document presents the results of a task to update the evaluation of River Protection Project (WP) sampling equipment drawings and updates the assigned drawings category as either essential, support, or general drawings. This report updates the drawing evaluation that was originally done per Engineering Task Plan For Truck 3 and 4 Drawing Compliance and Evaluation. The scope of this report is limited to updating the evaluation and identification of drawing category for drawings of certain tank waste sampling equipment for which the RPP Characterization Project has been assigned custody, including: vapor sampling, grab sampling, auger sampling, all core sampling equipment, and Light Duty Utility Arm (LDUA) (see LMHC contract No. 519, release 10). This report does not address drawings for other waste tank deployed equipment systems having similar assigned custody, such as, Cone Penetrometer system, or Long Length Contaminated Equipment (LLCE). The Cone Penetrometer system, which is depicted on vendor drawings, (not H- series), is not currently turned over to operations for deployment. The LLCE equipment was just recently assigned to Characterization Project and was not included in the original scope for this update and will be addressed in the evaluation update scheduled for later in fiscal year 1999, when equipment ownership is determined

  19. Reference levels for assays in opened installations of industrial radiography; Niveis de referencia para ensaios em instalacoes abertas de radiografia industrial

    Energy Technology Data Exchange (ETDEWEB)

    Leocadio, Joao C.; Tauhata, Luiz [Instituto de Radioprotecao e Dosimetria (IRD), Rio de Janeiro, RJ (Brazil); Crispim, Verginia R. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Engenharia Nuclear

    2001-07-01

    This work had as objectives to analyze the facilities open of industrial x-ray to obtain the distribution of doses in the operators and present proposed for the reference levels. The results of the monitoring revealed an improvement of the radiation protection conditions in the facilities and that the risk of potential exposure was reduced. The advantage of the proposed reference levels is that the supervisors would enlarge the frequency of audits in the facilities opened to accomplish the investigations and interventions.The facilities open with 'bunkers' presented distributions with 95% of the doses below 0,2 mSv and the distributions of the facilities with cordoned area they had 75% of the doses below 0,4 mSv. (author)

  20. Calculation and construction of radioisotopic radiation chemical installations. [Book (reference text); In Russian]. Raschet i konstruirovanie radioizotopnykh radiatsionno-khimicheskikh ustanovok

    Energy Technology Data Exchange (ETDEWEB)

    Kulisha, E E

    1975-01-01

    A discussion is given of the development of radiation sources and the uses of gamma sources. The chemical and radiation characteristics of the sources are considered, and the fabrication methods are described for different types of sources used for radiation-induced chemical processes in condensed phase and in two-phase systems. Technological dosimetry, industrial and radiation safety, and economic aspects of gamma sources are examined. The text serves as a reference for physicists, chemistry technologists, engineers, and other scientific workers.

  1. Installation Art

    DEFF Research Database (Denmark)

    Petersen, Anne Ring

    Despite its large and growing popularity – to say nothing of its near-ubiquity in the world’s art scenes and international exhibitions of contemporary art –installation art remains a form whose artistic vocabulary and conceptual basis have rarely been subjected to thorough critical examination....... In Installation Art: Between Image and Stage, Anne Ring Petersen aims to change that. She begins by exploring how installation art developed into an interdisciplinary genre in the 1960s, and how its intertwining of the visual and the performative has acted as a catalyst for the generation of new artistic...... phenomena. It investigates how it became one of today’s most widely used art forms, increasingly expanding into consumer, popular and urban cultures, where installation’s often spectacular appearance ensures that it meets contemporary demands for sense-provoking and immersive cultural experiences. The main...

  2. Installation Art

    DEFF Research Database (Denmark)

    Petersen, Anne Ring

    . In Installation Art: Between Image and Stage, Anne Ring Petersen aims to change that. She begins by exploring how installation art developed into an interdisciplinary genre in the 1960s, and how its intertwining of the visual and the performative has acted as a catalyst for the generation of new artistic......Despite its large and growing popularity – to say nothing of its near-ubiquity in the world’s art scenes and international exhibitions of contemporary art –installation art remains a form whose artistic vocabulary and conceptual basis have rarely been subjected to thorough critical examination...... phenomena. It investigates how it became one of today’s most widely used art forms, increasingly expanding into consumer, popular and urban cultures, where installation’s often spectacular appearance ensures that it meets contemporary demands for sense-provoking and immersive cultural experiences. The main...

  3. Design and installation package for a solar powered pump

    Science.gov (United States)

    1978-01-01

    The design and installation procedures of a solar powered pump developed by Calmac Manufacturing Company are presented. Subsystem installation, operation and maintenance requirements, subsystem performance specifications, and detailed design drawings are included.

  4. Nuclear installations

    International Nuclear Information System (INIS)

    2001-01-01

    This document presents the fulfilling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 2 of the document contains some details about the existing Brazilian nuclear installations. Also, safety improvements at Angra 1 and aspects of Angra 2 and 3 are reported

  5. Nuclear installations

    International Nuclear Information System (INIS)

    1998-01-01

    This document presents the fulfilling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 2 of the document contains some details about the existing Brazilian nuclear installations. Also, safety improvements at Angra 1 and aspects of Angra 2 and 3 are reported

  6. Geometric and engineering drawing

    CERN Document Server

    Morling, K

    2010-01-01

    The new edition of this successful text describes all the geometric instructions and engineering drawing information that are likely to be needed by anyone preparing or interpreting drawings or designs with plenty of exercises to practice these principles.

  7. HippoDraw

    International Nuclear Information System (INIS)

    Gravina, M.F.; Kunz, P.F.; Rensing, P.E.

    1992-09-01

    HippoDraw is a NeXTSTEP application for viewing statistical data. It has several unique features which make viewing data distributions highly interactive. It also incorporates a set of simple drawing tools. HippoDraw is written in Objective-C and uses the Hippoplotamus library package to handle the n-tuples and displays

  8. Generative Processes: Thick Drawing

    Science.gov (United States)

    Wallick, Karl

    2012-01-01

    This article presents techniques and theories of generative drawing as a means for developing complex content in architecture design studios. Appending the word "generative" to drawing adds specificity to the most common representation tool and clarifies that such drawings are not singularly about communication or documentation but are…

  9. TWRS system drawings and field verification

    International Nuclear Information System (INIS)

    Shepard, D.G.

    1995-01-01

    The Configuration Management Program combines the TWRS Labeling and O and M drawing and drawing verification programs. The combined program will produce system drawings for systems that are normally operated or have maintenance performed on the system, label individual pieces of equipment for proper identification, even if system drawings are not warranted, and perform verification of drawings that are identified as essential in Tank Farm Essential Drawing Plans. During fiscal year 1994, work was begun to label Tank Farm components and provide user friendly system based drawings for Tank Waste Remediation System (TWRS) operations and maintenance. During the first half of fiscal 1995, the field verification program continued to convert TWRS drawings into CAD format and verify the accuracy based on visual inspections. During the remainder of fiscal year 1995 these efforts will be combined into a single program providing system based drawings and field verification of TWRS equipment and facilities. This combined program for TWRS will include all active systems for tank farms. Operations will determine the extent of drawing and labeling requirements for single shell tanks, i.e. the electrical distribution, HVAC, leak detection, and the radiation monitoring system. The tasks required to meet these objectives, include the following: identify system boundaries or scope for drawing being verified; label equipment/components in the process systems with a unique Equipment Identification Number (EIN) per the TWRS Data Standard; develop system drawings that are coordinated by ''smart'' drawing numbers and/or drawing references as identified on H-14-020000; develop a Master Equipment List (MEL) multi-user data base application which will contain key information about equipment identified in the field; and field verify and release TWRS Operation and Maintenance (O and M) drawings

  10. ENRAF gauge reference level calculations

    Energy Technology Data Exchange (ETDEWEB)

    Huber, J.H., Fluor Daniel Hanford

    1997-02-06

    This document describes the method for calculating reference levels for Enraf Series 854 Level Detectors as installed in the tank farms. The reference level calculation for each installed level gauge is contained herein.

  11. Drawing in nursing PBL.

    Science.gov (United States)

    Chan, Zenobia C Y

    2013-08-01

    The implementation of art education in nursing is said to have positive effects on nursing students. Most studies applied visual art dialogues or object design, whereas the effectiveness of drawing as a teaching and learning method is rarely examined and discussed. This paper aimed to discuss the potential and effectiveness of drawing as a learning and teaching method. Four drawings which were created by Hong Kong nursing students are demonstrated and the students' perspectives of how drawing enhanced learning are shown in this paper. Topics on drawing as a fun teaching and learning method and the way it can enhance critical thinking and creativity are also discussed. In conclusion, the activity was a great success, and students enjoyed the learning process and reflected positive comments. However, we cannot conclude that drawing is an effective teaching and learning method based on a single paper, therefore more similar studies should be conducted to investigate this method. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. Drawing Theory. An Introduction

    Directory of Open Access Journals (Sweden)

    Stefano Milani

    2014-08-01

    Full Text Available Nowadays, drawing practices seem to operate in a rather uncertain field that is typical of an in-between phase of disciplinary development and that needs to be addressed, if an ‘anticipated projection’ of the development of drawing is to be attempted. The field of drawing, as practice and discourse, seems to have entered an end-condition, where the celebration of the extensive production of drawings is combined with a certain fatigue in both its understanding and reflection. Even though the role of drawing is nowadays still regarded as the most common act of architecture, this understanding of drawing is hardly subject to critical inquiries, and, unfortunately, mostly limited to its instrumental role within the representation of the project.A common characteristic in all of the papers in this issue of Footprint is that a specific character of the theoretical field generated by drawing is the elaboration of the correlation between two epistemic regions. This singular character probably belongs to drawing’s structural duality of being simultaneously a simulacrum of a reality and reality itself, memory and anticipation, subject and object, by being in essence the measure of two different facets inherent to architectural thinking. Drawing not only gives consistency to the poles, rendering them architectural matter, but also literally (reconstructs them. At the same time, drawing formalizes the theoretical distance between the two.

  13. MiniDraw

    DEFF Research Database (Denmark)

    2018-01-01

    MiniDraw is a teaching-oriented 2D graphics direct manipulation framework in Java, inspired by JHotDraw. It is used in the book "Flexible, Reliable Software - using Patterns and Agile Development", by Henrik Bærbak Christensen, published by CRC Press 2010.......MiniDraw is a teaching-oriented 2D graphics direct manipulation framework in Java, inspired by JHotDraw. It is used in the book "Flexible, Reliable Software - using Patterns and Agile Development", by Henrik Bærbak Christensen, published by CRC Press 2010....

  14. Border installations

    International Nuclear Information System (INIS)

    Lenaerts, K.

    1988-01-01

    This chapter highlights the legal problems raised by the concept of a border installation. Using the Cattenom nuclear power plant as an example, the author describes the different stages of the legal conflict raised by construction of the plant and analyses the relationship between French administrative law and some provisions of the Euratom Treaty. Based on the Treaty, the Community institutions have adopted directives to strengthen inter-State co-operation and consultation between neighbouring countries. He observes that these principles of co-operation, consultation and vigilance already exist in public international law; however, international case law has not yet made it possible to establish the strict liability of the constructing state in case of a nuclear accident (NEA) [fr

  15. Responding to Children's Drawings

    Science.gov (United States)

    Watts, Robert

    2010-01-01

    This article aims to explore the issues that face primary school teachers when responding to children's drawings. Assessment in art and design is an ongoing concern for teachers with limited experience and confidence in the area and, although children's drawings continue to be a focus of much research, the question of what it is that teachers say…

  16. Architecture, Drawing, Topology

    DEFF Research Database (Denmark)

    Meldgaard, Morten

    This book presents contributions of drawing and text along with their many relationalities from ontology to history and vice versa in a range of reflections on architecture, drawing and topology. We hope to thereby indicate the potential of the theme in understanding not only the architecture of ...

  17. Strict confluent drawing

    NARCIS (Netherlands)

    Eppstein, D.; Holten, D.H.R.; Löffler, M.; Nöllenburg, M.; Speckmann, B.; Verbeek, K.A.B.

    2013-01-01

    We define strict confluent drawing, a form of confluent drawing in which the existence of an edge is indicated by the presence of a smooth path through a system of arcs and junctions (without crossings), and in which such a path, if it exists, must be unique. We prove that it is NP-complete to

  18. Strict confluent drawing

    NARCIS (Netherlands)

    Eppstein, D.; Holten, D.; Löffler, M.; Nöllenburg, M.; Speckmann, B.; Verbeek, K.A.B.

    2016-01-01

    We define strict confluent drawing, a form of confluent drawing in which the existence of an edge is indicated by the presence of a smooth path through a system of arcs and junctions (without crossings), and in which such a path, if it exists, must be unique. We prove that it is NP-complete to

  19. Characterization equipment essential drawing plan

    International Nuclear Information System (INIS)

    WILSON, G.W.

    1999-01-01

    The purpose of this document is to list the Characterization equipment drawings that are classified as Essential Drawings. Essential Drawings: Are those drawings identified by the facility staff as necessary to directly support the safe operation of the facility or equipment (HNF 1997a). The Characterization equipment drawings identified in this report are deemed essential drawings as defined in HNF-PRO-242, Engineering Drawing Requirements (HNF 1997a). These drawings will be prepared, revised, and maintained per HNF-PRO-440, Engineering Document Change Control (HNF 1997b). All other Characterization equipment drawings not identified in this document will be considered Support drawings until the Characterization Equipment Drawing Evaluation Report is completed

  20. Automated drawing generation system

    International Nuclear Information System (INIS)

    Yoshinaga, Toshiaki; Kawahata, Junichi; Yoshida, Naoto; Ono, Satoru

    1991-01-01

    Since automated CAD drawing generation systems still require human intervention, improvements were focussed on an interactive processing section (data input and correcting operation) which necessitates a vast amount of work. As a result, human intervention was eliminated, the original objective of a computerized system. This is the first step taken towards complete automation. The effects of development and commercialization of the system are as described below. (1) The interactive processing time required for generating drawings was improved. It was determined that introduction of the CAD system has reduced the time required for generating drawings. (2) The difference in skills between workers preparing drawings has been eliminated and the quality of drawings has been made uniform. (3) The extent of knowledge and experience demanded of workers has been reduced. (author)

  1. Order of blood draw

    DEFF Research Database (Denmark)

    Cornes, Michael; van Dongen-Lases, Edmée; Grankvist, Kjell

    2017-01-01

    does occur if order of draw is not followed during blood collection and when performing venipuncture under less than ideal circumstances, thus putting patient safety at risk. Moreover, given that order of draw is not difficult to follow and knowing that ideal phlebotomy conditions and protocols...... Medicine Working Group for the Preanalytical Phase (EFLM WG-PRE) provides an overview and summary of the literature with regards to order of draw in venous blood collection. Given the evidence presented in this article, the EFLM WG-PRE herein concludes that a significant frequency of sample contamination...

  2. Drawings: Kozloduy NPP

    International Nuclear Information System (INIS)

    Boyadjiev, Z.

    1995-01-01

    This paper includes drawings of Kozloduy nuclear power plant needed for study for the seismic analysis and testing. It covers the list and schemes of safety and safety related systems for normal operation as well as protection and control systems

  3. Right Brain Drawing.

    Science.gov (United States)

    Whalen, Adryce C.

    1985-01-01

    The author describes activities of a weekly enrichment class providing right-brain tasks to gifted elementary students. Activities, which centered on artistic creativity, were taken from "Drawing On the Right Side of the Brain" by B. Edwards. (CL)

  4. Headache in children's drawings.

    Science.gov (United States)

    Wojaczyńska-Stanek, Katarzyna; Koprowski, Robert; Wróbel, Zygmunt; Gola, Małgorzata

    2008-02-01

    Headache is a common health problem in childhood. Children's drawings are helpful in the diagnosis of headache type. Children, especially younger ones, communicate better through pictures than verbally. The aim of the present study is to evaluate the usefulness of drawings of the child's headache in the diagnostic process carried out by a pediatrician and a pediatric neurologist. At the beginning of a visit in a neurological clinic, or on the first day of hospitalization, the child was asked, "Please draw your headache," or "How do you feel your headache?" without any additional explanations or suggestions. Clinical diagnosis of headache type was made on the basis of the standard diagnostic evaluation. For the purpose of this study, children's headaches were categorized as migraine, tension-type headache, or "the others." One hundred twenty-four drawings of children with headaches were analyzed by 8 pediatricians and 8 pediatric neurologists. The analysts were unaware of the clinical history, age, sex, and diagnosis of the patients. The clinical diagnosis was considered the "gold standard" to which the headache drawing diagnosis was compared. There were 68 girls 5-18 years of age and 56 boys 7-18 years of age. Of the 124 children, 40 were clinically diagnosed with migraine (32.2%), 47 with tension-type headache (37.9%), and 37 (29.8%) as the others. Children with migraine most frequently draw sharp elements. Children with tension-type headache mainly drew compression elements and pressing elements. In the group of "the other" headaches, 21 children were diagnosed with somatoform disorders. The most frequent element in this group's drawings was a whirl in the head. Colors used most frequently were black and red, which signify severe pain. There was no difference in sensitivity of diagnoses between neurologists and pediatricians. Because the evaluation of drawings by children with headaches done both by pediatricians and pediatric neurologists was correct for

  5. Tank farms essential drawing plan

    International Nuclear Information System (INIS)

    Domnoske-Rauch, L.A.

    1998-01-01

    The purpose of this document is to define criteria for selecting Essential Drawings, Support Drawings, and Controlled Print File (CPF) drawings and documents for facilities that are part of East and West Tank Farms. Also, the drawings and documents that meet the criteria are compiled separate listings. The Essential Drawing list and the Support Drawing list establish a priority for updating technical baseline drawings. The CPF drawings, denoted by an asterisk (*), defined the drawings and documents that Operations is required to maintain per the TWRS Administration Manual. The Routing Boards in Buildings 272-WA and 272-AW are not part of the CPF

  6. JaxoDraw: A graphical user interface for drawing Feynman diagrams. Version 2.0 release notes

    Science.gov (United States)

    Binosi, D.; Collins, J.; Kaufhold, C.; Theussl, L.

    2009-09-01

    A new version of the Feynman graph plotting tool JaxoDraw is presented. Version 2.0 is a fundamental re-write of most of the JaxoDraw core and some functionalities, in particular importing graphs, are not backward-compatible with the 1.x branch. The most prominent new features include: drawing of Bézier curves for all particle modes, on-the-fly update of edited objects, multiple undo/redo functionality, the addition of a plugin infrastructure, and a general improved memory performance. A new LaTeX style file is presented that has been written specifically on top of the original axodraw.sty to meet the needs of this new version. New version program summaryProgram title: JaxoDraw Catalogue identifier: ADUA_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADUA_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GPL No. of lines in distributed program, including test data, etc.: 103 544 No. of bytes in distributed program, including test data, etc.: 3 745 814 Distribution format: tar.gz Programming language: Java Computer: Any Java-enabled platform Operating system: Any Java-enabled platform, tested on Linux, Windows XP, Mac OS X Classification: 14 Catalogue identifier of previous version: ADUA_v1_0 Journal reference of previous version: Comput. Phys. Comm. 161 (2004) 76 Does the new version supersede the previous version?: Yes Nature of problem: Existing methods for drawing Feynman diagrams usually require some hard-coding in one or the other programming or scripting language. It is not very convenient and often time consuming, to generate relatively simple diagrams. Solution method: A program is provided that allows for the interactive drawing of Feynman diagrams with a graphical user interface. The program is easy to learn and use, produces high quality output in several formats and runs on any operating system where a Java Runtime Environment is available. Reasons for new version: A

  7. Solar heating, cooling and domestic hot water system installed at Columbia Gas System Service Corporation, Columbus, Ohio

    Science.gov (United States)

    1980-01-01

    The solar energy system installed in the building has 2,978 sq ft of single axis tracking, concentrating collectors and provides solar energy for space heating, space cooling and domestic hot water. A 1,200,000 Btu/hour water tube gas boiler provides hot water for space heating. Space cooling is provided by a 100 ton hot water fired absorption chiller. Domestic hot water heating is provided by a 50 gallon natural gas domestic storage water heater. Extracts from the site files, specification references, drawings, installation, operation and maintenance instructions are included.

  8. PARAMETRIC DRAWINGS VS. AUTOLISP

    Directory of Open Access Journals (Sweden)

    PRUNĂ Liviu

    2015-06-01

    Full Text Available In this paper the authors make a critical analysis of the advantages offered by the parametric drawing use by comparison with the AutoLISP computer programs used when it comes about the parametric design. Studying and analysing these two work models the authors have got to some ideas and conclusions which should be considered in the moment in that someone must to decide if it is the case to elaborate a software, using the AutoLISP language, or to establish the base rules that must be followed by the drawing, in the idea to construct outlines or blocks which can be used in the projection process.

  9. Mechanical Drawing and Design.

    Science.gov (United States)

    Mikulsky, Marilyn; McEnaney, Walter K.

    A syllabus is provided for a comprehensive foundation course in mechanical drawing and design for grades 9, 10, 11, or 12 that is prerequisite to advanced elective courses. Introductory materials include course objectives, an overview of basic concepts, and guidelines for implementation. Brief discussions of and suggestions for the areas of design…

  10. Drawing Hospital Foodscapes

    DEFF Research Database (Denmark)

    Tvedebrink, Tenna Doktor Olsen; Fisker, Anna Marie; Kirkegaard, Poul Henning

    This poster presents a series of drawings depicting the initial considerations made with the Ph.D. project for an improved ‘Interior Design for Food’ in a Danish hospital ward. The project concerns a study on the ontological and symbolic interrelationship possibly existing between food...

  11. Drawing the Line

    DEFF Research Database (Denmark)

    Holm, Isak Winkel

    2016-01-01

    of judgement that distinguishes between the inside and outside of a political community, between citizens and zombies. Second, the chapter focuses on the rhetorics applied to draw the line between rights-bearers and the rightless. ‘Prophetic’ speech, echoing the language of the Old Testament prophets, is vital...

  12. Bernard Tschumi Draws Architecture!

    Directory of Open Access Journals (Sweden)

    Gevork Hartoonian

    2014-08-01

    Full Text Available Bernard Tschumi’s delineation prepared for the Museu de Arte Contemporânea provides the starting point for this essay, which discusses the historicity of drawing and highlights the horizontality and the verticality that structure architecture’s contrast with the pictorial realm. Juxtaposing a freehand sketch with the digital image of the same project, Tschumi moves to address the paradox concerning the position of the body and drawing. This drawing also speaks for the reversal in the position of the body brought about by digital reproductivity.The reversal alludes to Tschumi’s theorization of architecture in terms of space and event. These, I will argue, are anticipated in The Manhattan Transcripts (1981 where a set of freehand drawings is used to evoke a filmic mood wherein the image is projected parallel to the spectator’s seated position. The essay goes further, suggesting that the theatricality permeating the present architecture is part of the shift from horizontality to the painterly, and yet the phenomenon is not merely a technical issue. Rather, it alludes to architecture’s dialogical rapport with painting at work since the Renaissance.

  13. Drawing experts have better visual memory while drawing

    NARCIS (Netherlands)

    Perdreau, F.A.G.; Cavanagh, P.

    2015-01-01

    Drawing involves frequent shifts of gaze between the original and the drawing and visual memory helps compare the original object and the drawing across these gaze shifts while creating and correcting the drawing. It remains unclear whether this memory encodes all of the object or only the features

  14. Installation package - home solar heater

    Science.gov (United States)

    1980-01-01

    Installation of commerical solar-heating system at two story, three bedroom house in New Hampshire is described in 65 page report. System collectors are integrated part of building replacing conventional roofing or siding. Report also includes general description of system, its operation and guidelines, orientation and references.

  15. Drawing and Sketching in Agricultural Mechanics.

    Science.gov (United States)

    Montana State Univ., Bozeman. Dept. of Agricultural and Industrial Education.

    This unit of instruction on drawing and sketching in agricultural mechanics is designed especially for use with freshman vocational agriculture students. A unit plan discusses the general aims and goals, lesson titles, student and teacher activities, a list of necessary special equipment and references. The unit consists of nine lessons. A lesson…

  16. 46 CFR 111.60-5 - Cable installation.

    Science.gov (United States)

    2010-10-01

    ... REQUIREMENTS Wiring Materials and Methods § 111.60-5 Cable installation. (a) Each cable installation must meet... 46 Shipping 4 2010-10-01 2010-10-01 false Cable installation. 111.60-5 Section 111.60-5 Shipping... incorporated by reference; see 46 CFR 110.10-1), including clause 8. (b) Each cable installation made in...

  17. Draw the Line!

    DEFF Research Database (Denmark)

    present proceedings from the UPGEM conference "Draw the Line!" in Copenhagen May 2008. The proceedings include contributions by UPGEM researchers, conference speeches by other researchers, politicians and gender equality officers in which they relate their work and research with the research done in UPGEM......Draw the Line! International Conference, Copenhagen 2008 Papers, proceedings and recommendations is the second publication of the international three year long project "Understanding Puzzles in the Gendered European Map" (UPGEM), which is financed by the European Commission. In this publication we....... The UPGEM research has previously been published in national reports from each of the partner countries (Denmark, Estonia, Finland, Italy and Poland). In these individual national reports of universities as workplaces for male and female researchers we discuss scientific cultures in physics embedded...

  18. The Creative Drawing process

    DEFF Research Database (Denmark)

    Flensborg, Ingelise

      The creative drawing process Associated Professor Ingelise Flensborg, PhD The Danish University school of Education, Aarhus University Tuborgvej 164 København NV   Why are children's drawings important for the development of cognitive structures and for their development in a visual society......'s. It is a pattern of actions as well as a pattern for action    In my doctoral thesis I discussed the connection between spatial orientation and visual representation (as a form of knowledge). I wanted to show the developmental possibilities within spatial cognition in art-education. I used the dynamic theory......, which is supposed to be our most basic cognitive structure. The body's interaction with the environment is decisive for children's spatial representations. In my theoretical and empirical investigations I found that this interaction creates the basic form of cognitive structures. The child...

  19. Animated construction of line drawings

    KAUST Repository

    Fu, Hongbo

    2011-12-01

    Revealing the sketching sequence of a line drawing can be visually intriguing and used for video-based storytelling. Typically this is enabled based on tedious recording of artists\\' drawing process. We demonstrate that it is often possible to estimate a reasonable drawing order from a static line drawing with clearly defined shape geometry, which looks plausible to a human viewer. We map the key principles of drawing order from drawing cognition to computational procedures in our framework. Our system produces plausible animated constructions of input line drawings, with no or little user intervention. We test our algorithm on a range of input sketches, with varying degree of complexity and structure, and evaluate the results via a user study. We also present applications to gesture drawing synthesis and drawing animation creation especially in the context of video scribing.

  20. Animated construction of line drawings

    KAUST Repository

    Fu, Hongbo

    2011-12-01

    Revealing the sketching sequence of a line drawing can be visually intriguing and used for video-based storytelling. Typically this is enabled based on tedious recording of artists\\' drawing process. We demonstrate that it is often possible to estimate a reasonable drawing order from a static line drawing with clearly defined shape geometry, which looks plausible to a human viewer. We map the key principles of drawing order from drawing cognition to computational procedures in our framework. Our system produces plausible animated constructions of input line drawings, with no or little user intervention. We test our algorithm on a range of input sketches, with varying degree of complexity and structure, and evaluate the results via a user study. We also present applications to gesture drawing synthesis and drawing animation creation especially in the context of video scribing. © 2011 ACM.

  1. The air quality in ventilation installations. Practical guidelines; Qualite de l'air dans les installations aerauliques. Guide pratique

    Energy Technology Data Exchange (ETDEWEB)

    Angeli, L. [France Air, 91 - Chilly Mazarin (France); Bianchina, M. [Unelvent, 93 - Le Bourget (France); Blazy, M. [Anjos, 01 - Torcieu (France); Boulanger, X. [Aldes, 21 - Chenove (France); Chiesa, M. [Atlantic (France); Duclos, M. [Groupe Titanair, 69 - Lyon (France); Hubert, D.; Kridorian, O. [Groupe Astato, Blanc Mesnil (France); Josserand, O. [Carrier (Belgium); Lancieux, C. [Camfil, 60 - Saint Martin Longueau (France); Lemaire, J.C. [Agence de l' Environnement et de la Maitrise de l' Energie, ADEME, 75 - Paris (France); Petit, Ph. [Compagnie Industrielle d' Applications Thermiques ( CIAT ), 75 - Paris (France); Ribot, B. [Electricite de France (EDF), 75 - Paris (France); Tokarek, S. [Gaz de France (GDF), 75 - Paris (France); Bernard, A.M.; Tissot, A. [Centre Technique des Industries Aerauliques et Thermiques (CETIAT), 69 - Villeurbanne (France)

    2004-07-01

    The present guide aims to provide design departments, maintenance companies and builders with practical guidelines and recommendations for the installation of ventilation and air-conditioning systems. The objective is to ensure good Indoor Air Quality (IAQ) and to safeguard the health and well-being of the occupants. The guide deals with aspects of design, dimensioning, installation and servicing, all of which play a major role in guaranteeing IAQ and duct-work hygiene. These steps are reviewed for the principal ventilation systems met in both residential and commercial premises. The first part presents the system and draws the attention of the user to specific points which require particular care in term of IAQ. The second part details recommended practice component by component, in respect of design, installation and servicing. Application of these simple guidelines during the various project stages is essential, in order to ensure a good IAQ in ventilation systems. Content: introduction; good ventilation; systems: exhaust ventilation, balanced ventilation, air handling unit, terminal ventilation units, impact of systems on indoor air quality, components: air inlet, air filter, heat recovery unit, heating or cooling coil, humidifier, mechanical fan unit, cowl and hybrid ventilation fan, mixing box, ventilation duct-work, air outlet and air terminal device; references.

  2. PARAMETRIC DRAWINGS VS. AUTOLISP

    OpenAIRE

    PRUNĂ Liviu; SLONOVSCHI Andrei

    2015-01-01

    In this paper the authors make a critical analysis of the advantages offered by the parametric drawing use by comparison with the AutoLISP computer programs used when it comes about the parametric design. Studying and analysing these two work models the authors have got to some ideas and conclusions which should be considered in the moment in that someone must to decide if it is the case to elaborate a software, using the AutoLISP language, or to establish the base rules that must be followed...

  3. Drawing evaluation report for sampling equipment drawings; TOPICAL

    International Nuclear Information System (INIS)

    WILSON, G.W.

    1999-01-01

    This document presents the results of a task to evaluate Tank Waste Remediation System (TWRS) sampling equipment drawings and identifies drawings category as either essential, support, or general drawings. This report completes the drawing evaluation task as outlined in Engineering Task Plan For Truck 3 and 4 Drawing Compliance and Evaluation (Wilson, 1997). The scope of this report is limited to an evaluation and identification of drawing category for drawings of certain tank waste sampling equipment for which the TRWS Characterization Project has been assigned custody, including: vapor sampling, grab sampling, auger sampling, and all core sampling equipment (see LMHC Task Order 304). This report does not address drawings for other waste tank deployed equipment systems having similar assigned custody, such as, Light Duty Utility Arm (LDUA), Cone Penetrometer system, or Long Length Contaminated Equipment (LLCE). The LDUA drawings are addressed in the Characterization Equipment Essential Drawings (HNF 1998). The Cone Penetrometer system drawings which are vendor drawings (not H- series) is not currently turned over to operations for deployment. The LLCE equipment was just recently assigned to Characterization Project and were not included in the original scope for this evaluation and will be addressed in the evaluation update scheduled for fiscal year 1999

  4. Drawing experts have better visual memory while drawing.

    Science.gov (United States)

    Perdreau, Florian; Cavanagh, Patrick

    2015-01-01

    Drawing involves frequent shifts of gaze between the original and the drawing and visual memory helps compare the original object and the drawing across these gaze shifts while creating and correcting the drawing. It remains unclear whether this memory encodes all of the object or only the features around the current drawing position and whether both the original and the copy are equally well represented. To address these questions, we designed a "drawing" experiment coupled with a change detection task. A polygon was displayed on one screen and participants had to copy it on another, with the original and the drawing presented in alternation. At unpredictable moments during the copying process, modifications were made on the drawing and the original figure (while they were not in view). Participants had to correct their drawing every time they perceived a change so that their drawing always matched the current original figure. Our results show a better memory representation of the original figure than of the drawing, with locations relevant to the current production most accurately represented. Critically, experts showed better memory for both the original and the drawing than did novices, suggesting that experts have specialized advantages for encoding visual shapes.

  5. Decommissioning of offshore installations

    Energy Technology Data Exchange (ETDEWEB)

    Oeen, Sigrun; Iversen, Per Erik; Stokke, Reidunn; Nielsen, Frantz; Henriksen, Thor; Natvig, Henning; Dretvik, Oeystein; Martinsen, Finn; Bakke, Gunnstein

    2010-07-01

    and requirements that should be considered in the regulation of decommissioning facilities for offshore installations. These facilities need sound expertise to be able to identify and deal with different types of waste, including hazardous waste such as heavy metals, other hazardous substances, low specific activity (LSA) radioactive material and asbestos. Facilities must be designed to allow safe handling of such waste, with no risk of runoff or infiltration into the soil. In addition, a decommissioning facility should have an effective collection system and an on-site treatment plant for contaminated water, including surface water. Each facility must have a sampling and analysis programme to monitor releases of the most relevant pollutants. The need for an environmental monitoring programme to follow developments in the recipient should also be considered. Other factors that must be closely monitored include noise and releases to air in connection with metal cutting and other operations. Moreover, decommissioning contracts must ensure that the costs of handling hazardous waste are met by the offshore operators. When decommissioning facilities for offshore installations are being sited, other interests must also be taken into account; for example, the use of nearby areas for housing, holiday housing or recreation. In addition, the implications for other sectors such as fisheries and agriculture must be taken into consideration. These are important issues that the municipalities must consider when preparing zoning plans and drawing up environmental impact assessments. In many cases, a regional authority is in a better position than a national one to make overall, cross-sectoral assessments of developments within the region. Nevertheless, the report recommends transferring the authority for regulating decommissioning facilities for offshore installations from the County Governors to the Climate and Pollution Agency. Regulating these facilities requires special

  6. Animated construction of line drawings

    KAUST Repository

    Fu, Hongbo; Zhou, Shizhe; Liu, Ligang; Mitra, Niloy J.

    2011-01-01

    Revealing the sketching sequence of a line drawing can be visually intriguing and used for video-based storytelling. Typically this is enabled based on tedious recording of artists' drawing process. We demonstrate that it is often possible

  7. Czech Children's Drawing of Nature

    Science.gov (United States)

    Yilmaz, Zuhal; Kubiatko, Milan; Topal, Hatice

    2012-01-01

    Do world children draw nature pictures in a certain way? Range of mountains in the background, a sun, couple clouds, a river rising from mountains. Is this type of drawing universal in the way these nature items are organized on a drawing paper? The sample size from Czech Republic included 33 participants from two kindergartens. They were 5 and 6…

  8. Drawing in architectural lighting design

    NARCIS (Netherlands)

    Skipetari, A.; Nijhuis, S.

    2011-01-01

    Drawing is an important tool for lighting designers. Not only as a means of visual communication but also to aid visual thinking. As a process and product, drawing is a constituent part of the overall lighting design process, from concept to realisation. The emphasis is usually placed on drawing as

  9. Nuclear Installations Act 1965

    International Nuclear Information System (INIS)

    1965-01-01

    This Act governs all activities related to nuclear installations in the United Kingdom. It provides for the licensing procedure for nuclear installations, the duties of licensees, the competent authorities and carriers of nuclear material in respect of nuclear occurrences, as well as for the system of third party liability and compensation for nuclear damage. The Act repeals the Nuclear Installations (Licensing and Insurance) Act 1959 and the Nuclear Installations (Amendment Act) 1965 except for its Section 17(2). (NEA) [fr

  10. Installation report - Lidar

    DEFF Research Database (Denmark)

    Georgieva Yankova, Ginka; Villanueva, Héctor

    The report describes the installation, configuration and data transfer for the ground-based lidar. The unit is provided by a customer but is installed and operated by DTU while in this project.......The report describes the installation, configuration and data transfer for the ground-based lidar. The unit is provided by a customer but is installed and operated by DTU while in this project....

  11. The Upgraded Plasma Focus Installation > - The Installation >

    International Nuclear Information System (INIS)

    Krokhin, O.N.; Nikulin, V.Ya.; Babenko, B.A.; Gorbunov, D.N.; Gurei, A.E.; Kalachev, N.V.; Kozlova, T.A.; Malafeev, Yu.S.; Polukhin, S.N.; Sychev, A.A.; Tikhomirov, A.A.; Tsybenko, S.P.; Volobuev, I.V.

    1999-01-01

    The paper presents the upgraded plasma focus installation > - the installation > and some preliminary experimental results. The total energy stored in capacity bank is now 400 kJ, current - 5 MA with the rise time 3.5 μs. The investigation is targeted on the study of near electrode processes and its influence on plasma dynamics in a special operating regime of Filippov type PF - Hard X-ray regime. (author)

  12. Architectural Drawing - an Animate Field

    DEFF Research Database (Denmark)

    Hougaard, Anna Katrine

    2015-01-01

    Architectural drawing is changing because architects today draw with computers. Due to this change digital diagrams employed by computational architectural practices are often emphasized as powerful structures of control and organisation in the design process. But there are also diagrams, which do...... ways of directing behaviour of artefacts and living things without controlling this behaviour completely. I analyse a musical composition by John Cage as an example of a sketch diagram, and then hypothesize that orthogonal, architectural drawing can work in similar ways. Thereby I hope to point out...... important affordance of architectural drawing as a ¬hybrid between the openness of hand-sketching and the rule-based-ness of diagramming, an affordance which might be useful in the migrational zone of current architectural drawing where traditional hand drawing techniques and computer drawing techniques...

  13. CDD CERN Drawings Directory User's manual Version 1.1

    CERN Document Server

    Delamare, Christophe; Jeannin, F; Petit, S

    1996-01-01

    CDD (CERN Drawings Directory) is a multi-platform utility which manages engineering drawings made in any division at CERN. The aim of CDD is not to store the graphical drawing itself, but to store a reference with some information related to the drawing. Access to this data is provided via a graphical user interface which is based upon ORACLE Forms and via WWW. Drawings following different numbering systems and different management rules can be handled by CDD. The only condition is that those particular functionalities are well defined. Several drawing systems have been identified in CERN and therefore considered when designing the application. The current version of CDD focuses on systems EST, LEP, ST-IE, SPS, ST-CE and the experiments ALICE, ATLAS, CMS and LHCb. Other CERN systems could be easily integrated upon demand.

  14. On astronomical drawing [1846

    Science.gov (United States)

    Smyth, Charles Piazzi

    Reprinted from the Memoirs of the Royal Astronomical Society 15, 1846, pp. 71-82. With annotations and illustrations added by Klaus Hentschel. The activities of the Astronomer Royal for Scotland, Charles Piazzi Smyth (1819-1900), include the triangulation of South African districts, landscape painting, day-to-day or tourist sketching, the engraving and lithographing of prominent architectural sites, the documentary photography of the Egyptian pyramids or the Tenerife Dragon tree, and `instant photographs' of the clouds above his retirement home in Clova, Ripon. His colorful records of the aurora polaris, and solar and terrestrial spectra all profited from his trained eye and his subtle mastery of the pen and the brush. As his paper on astronomical drawing, which we chose to reproduce in this volume, amply demonstrates, he was conversant in most of the print technology repertoire that the 19th century had to offer, and carefully selected the one most appropriate to each sujet. For instance, he chose mezzotint for the plates illustrating Maclear's observations of Halley's comet in 1835/36, so as to achieve a ``rich profundity of shadows, the deep obscurity of which is admirably adapted to reproduce those fine effects of chiaroscuro frequently found in works where the quantity of dark greatly predominates.'' The same expertise with which he tried to emulate Rembrandt's chiaroscuro effects he applied to assessing William and John Herschel's illustrations of nebulae, which appeared in print between 1811 and 1834. William Herschel's positive engraving, made partly by stippling and partly by a coarse mezzotint, receives sharp admonishment because of the visible ruled crossed lines in the background and the fact that ``the objects, which are also generally too light, [have] a much better definition than they really possess.'' On the other hand, John Herschel's illustration of nebulae and star clusters, given in negative, ``in which the lights are the darkest part of the

  15. Drawing expression of autistic child

    OpenAIRE

    SOLDÁTOVÁ, Barbora

    2016-01-01

    The presented thesis deals with drawing of children with autism. It is divided into two parts, the theoretical and the empirical. In the theoretical parts there are four chapters. Three chapters deal with problem of autism spectrum disorders, types of autism, options of diagnostics, frequency and possible causes of autism. The fourth chapter deals with basic information about children's drawing, unique manifestation of the autistic disablement in the children's drawing. In the empirical part ...

  16. Medical-professional control of internal exposure to radionuclides in base nuclear installations. Extract from recommendations elaborated according to the methodological guide 'Recommendations for clinical practice' published by the Health High Authority in July 2011 - Occupational health references Nr 130

    International Nuclear Information System (INIS)

    Agrinier, Anne-Laure; Berard, Philippe; Piechowski, Jean; Blanchardon, Eric; Challeton de Vathaire, Cecile; Franck, Didier; Blanchin, Nicolas; Fottorino, Robert; Bourgaut, Laurent; Fritsch, Paul; Poncy, Jean-Luc; Gonin, Michele; Quesne, Benoit

    2012-06-01

    This sheet addresses the medical-professional control of the internal exposure to radionuclides in relationship with professional activity of workers exposed to this risk in base nuclear installations. It presents and discusses published recommendations which aimed at optimizing the prevention of the internal exposure risk and the medical follow-up of workers exposed to this risk. Different themes are addressed which concerns the implementation, communication, traceability and archiving, control programmes, the assessment of the efficient dose, the health risk and the taking on by labour medicine

  17. Stages of Drawing and Intelligence

    National Research Council Canada - National Science Library

    Kavanagh, Fintan

    1998-01-01

    Children's drawings follow a developmental sequence. Beginning with uncontrolled scribble, children progress to controlled scribble, through basic forms, to increasingly sophisticated modes of representation...

  18. Optimal Monotone Drawings of Trees

    OpenAIRE

    He, Dayu; He, Xin

    2016-01-01

    A monotone drawing of a graph G is a straight-line drawing of G such that, for every pair of vertices u,w in G, there exists abpath P_{uw} in G that is monotone in some direction l_{uw}. (Namely, the order of the orthogonal projections of the vertices of P_{uw} on l_{uw} is the same as the order they appear in P_{uw}.) The problem of finding monotone drawings for trees has been studied in several recent papers. The main focus is to reduce the size of the drawing. Currently, the smallest drawi...

  19. [Teenagers' drawings in transcultural consultations].

    Science.gov (United States)

    Simon, Amalini; Titia Rizzi, Alice

    The place of teenagers' drawings has been studied as part of a transcultural consultation, based on the creativity of the children of migrants. When speaking is difficult, drawings enable teenagers to show another dimension of their internal world. Aravin, a young Tamil boy, who lacked the necessary words, was able to express all the complexity of his thoughts through his drawings, finally being able to formulate in the group the difficult situations which he was drawing. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  20. Shader-Based Wireframe Drawing

    DEFF Research Database (Denmark)

    Bærentzen, Jakob Andreas; Nielsen, Steen Lund; Gjøl, Mikkel

    2008-01-01

    In this paper, we first argue that drawing lines on polygons is harder than it may appear. We then propose two novel and robust techniques for a special case of this problem, namely wireframe drawing. Neither method suffers from the well-known artifacts associated with the standard two pass, offset...... based techniques for wireframe drawing. Both methods draw prefiltered lines and produce high-quality antialiased results without super-sampling. The first method is a single pass technique well suited for convex N-gons for small N (in particular quadrilaterals or triangles). It is demonstrated...

  1. Engineering drawing from the beginning

    CERN Document Server

    Cousins, M F

    1970-01-01

    Engineering Drawing from the Beginning, Volume 2 discusses the methods for communicating technical engineering concepts through illustrations and drawings. This volume covers the more advance techniques in engineering drawing. The coverage of the text includes the helix, which is the path traced by a point moving uniformly around the surface of a right cylinder that is moving axially. The book also covers drawings of solid objects such as prisms, pyramids, and cones, along with hollow objects made from sheet material. In Chapter 5, the text presents the conventional representations of common

  2. LHC installation planning

    CERN Document Server

    Weisz, S

    2005-01-01

    installation of the general services, the installation of the cryogenic line (QRL), the installation of the machine elements and the hardware commissioning. While the installation of the general services is now almost finished (see presentation by Katy Foraz and Serge Grillot), several problems and delays with the QRL made it unavoidable to revise the installation strategy and to schedule a number tasks in parallel. A new compressed installation planning has been issued, that fulfils the strategic objectives and allows starting new activities with minimal delays in sectors 7-8 and 8-1. However, the shortcuts that are introduced increase the level of risk that we will have to face and the coordination of such a large and complex variety of simultaneous activities makes the project even more challenging. The document will describe how the input from the different equipment groups is taken into account by the master schedule planning team with respect to equipment availability and production as well as logistics...

  3. Electrical installations and regulations

    CERN Document Server

    Whitfield, J F

    1966-01-01

    Electrical Installations and Regulations focuses on the regulations that apply to electrical installations and the reasons for them. Topics covered range from electrical science to alternating and direct current supplies, as well as equipment for providing protection against excess current. Cables, wiring systems, and final subcircuits are also considered, along with earthing, discharge lighting, and testing and inspection.Comprised of 12 chapters, this book begins with an overview of electrical installation work, traits of a good electrician, and the regulations governing installations. The r

  4. 30 CFR 77.211 - Draw-off tunnels; stockpiling and reclaiming operations; general.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Draw-off tunnels; stockpiling and reclaiming operations; general. 77.211 Section 77.211 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... WORK AREAS OF UNDERGROUND COAL MINES Surface Installations § 77.211 Draw-off tunnels; stockpiling and...

  5. Environmental assessment [of nuclear installations

    International Nuclear Information System (INIS)

    Townsley, M.

    1989-01-01

    The European Community has introduced a directive which instructs that for all projects likely to have a significant effect on the environment consent should only be given after a rigorous assessment of such effects has been carried out and presented as an environmental statement. Projects requiring environmental assessment include nuclear power stations, any thermal power station over 300MW, any radioactive waste storage or disposal facility, any installation which produces electricity, power lines, installations for fuel production, fuel reprocessing, radioactive waste processing and fuel enrichment. The statement must include a description of the likely effects, direct and indirect, on the environment of the development, with reference to human beings, flora, fauna, soil, water, air, climate, landscape, interactions of two or more of these, material assets and cultural heritage. Measures to avoid or remedy the impact must be included. (U.K.)

  6. Planning and installing micro-hydro systems a guide for designers, installers and engineers

    CERN Document Server

    Elliott, Chris

    2014-01-01

    An essential addition to the Earthscan Planning & Installing series, Planning and Installing Micro-Hydro Systems provides vital diagrams, pictures and tables detailing the planning and installing of a micro-hydro system, including information on the maintenance and economics once an installation is running. The book covers subjects such as measuring head and flow, ecological impacts, scheme layouts, practical advice, calculations and turbine choice. Archimedes screws are also covered in detail, as well as the main conventional choices relevant to small sites.Micro-hydro refers to hydropower sy

  7. How to draw a planarization

    NARCIS (Netherlands)

    Bläsius, T.; Radermacher, M.; Rutter, I.; Steffen, B.; Baier, C.; van den Brand, M.; Eder, J.; Hinchey, M.; Margaria, T.

    2017-01-01

    We study the problem of computing straight-line drawings of non-planar graphs with few crossings. We assume that a crossing-minimization algorithm is applied first, yielding a planarization, i.e., a planar graph with a dummy vertex for each crossing, that fixes the topology of the resulting drawing.

  8. Drawing Links within Dental Education

    Science.gov (United States)

    Wright, J.

    2017-01-01

    This study examines results of a practical drawing task given to a cohort of first year dental surgery students at Kings College Dental Institute, London. It compares and relates their success in drilling and removing caries and pulp tissue from a virtual tooth using the hapTEL virtual learning system, with each individuals' drawing skills.…

  9. Architectural Drawing - an Animate Field

    DEFF Research Database (Denmark)

    Hougaard, Anna Katrine

    2015-01-01

    Architectural drawing is changing because architects today draw with computers. Due to this change digital diagrams employed by computational architectural practices are often emphasized as powerful structures of control and organisation in the design process. But there are also diagrams, which d...

  10. Drawing subway maps : a survey

    NARCIS (Netherlands)

    Wolff, A.

    2007-01-01

    This paper deals with automating the drawing of subway maps. There are two features of schematic subway maps that make them different from drawings of other networks such as flow charts or organigrams. First, most schematic subway maps use not only horizontal and vertical lines, but also diagonals.

  11. Drawing cure: children's drawings as a psychoanalytic instrument.

    Science.gov (United States)

    Wittmann, Barbara

    2010-01-01

    This essay deals with the special case of drawings as psychoanalytical instruments. It aims at a theoretical understanding of the specific contribution made by children's drawings as a medium of the psychical. In the influential play technique developed by Melanie Klein, drawing continuously interacts with other symptomatic (play) actions. Nonetheless, specific functions of drawing within the play technique can be identified. The essay will discuss four crucial aspects in-depth: 1) the strengthening of the analysis's recursivity associated with the graphic artifact; 2) the opening of the analytic process facilitated by drawing; 3) the creation of a genuinely graphic mode of producing meaning that allows the child to develop a "theory" of the workings of his own psychic apparatus; and 4) the new possibilities of symbolization associated with the latter. In contrast to classical definitions of the psychological instrument, the child's drawing is a weakly structured tool that does not serve to reproduce psychic processes in an artificial, controlled setting. The introduction of drawing into the psychoanalytic cure is by no means interested in replaying past events, but in producing events suited to effecting a transformation of the synchronic structures of the unconscious.

  12. I Draw Therefore I Am: Drawing as Visual (Communication Studies

    Directory of Open Access Journals (Sweden)

    Muliyadi Mahamood

    2013-11-01

    Full Text Available This paper sets view to consider the significance of drawings as part of visual communication design. Drawing gives a chance to observe, to muse, to select and develop continuous thinking techniques. It is to present that drawing is not just a cursory to generate ideas, but it has its own energy and philosophy which deserve studying as a domain of art. In recent years, drawing has received attention; there is on the one hand a group of drawing practitioners, and on the other hand a group of drawing researchers. Drawing in design is a medium of visual and spatial thinking. Digging into research actually is a necessity for visual communication studies. It is suggested here three kinds of research approaches: research into art/design; research through art/design; and research for art/design. Indeed, it leads to four axis topics (topoi for design studies: design practice, design product, design discourse, and design meta-discourse. A field of study called ‘visual culture’ which, departed from the study of critical theory and cultural studies which have set out relatively new field of study called ‘visual studies’. Based upon to this perspective, visual (communication studies should be more self-reflexive. The production of visual communication contributes to construct the visual culture in society.

  13. PIXE measurements of Renaissance silverpoint drawings at VERA

    Energy Technology Data Exchange (ETDEWEB)

    Milota, Petra [Faculty of Physics, Isotope Research, University of Vienna, A-1090 Vienna (Austria); Reiche, Ina; Duval, Alain [Centre de recherche et de restauration des musees de France (C2RMF), CNRS UMR 171, Palais du Louvre, F-75001 Paris (France); Forstner, Oliver [Faculty of Physics, Isotope Research, University of Vienna, A-1090 Vienna (Austria); Guicharnaud, Helene [Centre de recherche et de restauration des musees de France (C2RMF), CNRS UMR 171, Palais du Louvre, F-75001 Paris (France); Kutschera, Walter [Faculty of Physics, Isotope Research, University of Vienna, A-1090 Vienna (Austria); Merchel, Silke [Centre Europeen de Recherche et d' Enseignement des Geosciences de l' Environnement (CEREGE), CNRS UMR 6635, F-13545 Aix en Provence (France); Priller, Alfred [Faculty of Physics, Isotope Research, University of Vienna, A-1090 Vienna (Austria); Schreiner, Manfred [Institute of Science and Technology in Art, Academy of Fine Arts Vienna, A-1010 Vienna (Austria); Steier, Peter [Faculty of Physics, Isotope Research, University of Vienna, A-1090 Vienna (Austria); Thobois, Elisabeth [Albertina, Albertinaplatz 1, A-1010 Vienna (Austria); Wallner, Anton; Wuenschek, Barbara [Faculty of Physics, Isotope Research, University of Vienna, A-1090 Vienna (Austria); Golser, Robin [Faculty of Physics, Isotope Research, University of Vienna, A-1090 Vienna (Austria)], E-mail: robin.golser@univie.ac.at

    2008-05-15

    Silverpoint drawings from the Renaissance are among the most precious and rarest treasures of graphical art. Our research group is particularly interested in the analysis of silverpoint drawings by Albrecht Duerer (1471-1528). A very sensitive and non-destructive analytical method, either spatially resolved synchrotron-radiation induced X-ray fluorescence (SY-XRF) or proton-induced X-ray emission (PIXE), is needed to determine the chemical composition of the very faint silver marks on such drawings. Duerer drawings from the collection of the Albertina, Vienna, were analyzed to amend existing data on Duerer drawings. For this purpose an external-beam PIXE setup was installed at the Vienna Environmental Research Accelerator (VERA). It allows to analyze a spot of {approx}0.15 mm on the object in air with 3 MeV protons, and to detect the emitted X-rays that are characteristic for the chemical composition with very good sensitivity and without harming the precious objects. After successful measurements on artificial test samples, four original silverpoint drawings were investigated: two portraits from Albrecht Duerer's very early period (self-portrait and portrait of his father) and two drawings from Duerer's sketch book of his travel to the Netherlands 1520/21.

  14. Risk assessment techniques for industrial installations

    International Nuclear Information System (INIS)

    Croitoru, C.; Dumitrescu, M.; Preda, I.; Stefanescu, I.; Titescu, G.

    1995-01-01

    This paper presents a risk analysis which concerns the following stages: identification of the initiation events, evaluation of the occurrence frequency of different accident sequences, assessment of human, economical, and environmental consequences, risk assessment and management. The study of the accident sequences subsequent to an initiation event was achieved by the event tree method. Also, there were developed methods based on mathematical models of installations which take into account reliability data, data concerning the exploitation history, and data referring to the human factor effects in the installation operation. These methods were used for the determination of occurrence frequencies of hydrogen sulfide emission accidents in the heavy water production installations

  15. Reference-Dependent Sympathy

    Science.gov (United States)

    Small, Deborah A.

    2010-01-01

    Natural disasters and other traumatic events often draw a greater charitable response than do ongoing misfortunes, even those that may cause even more widespread misery, such as famine or malaria. Why is the response disproportionate to need? The notion of reference dependence critical to Prospect Theory (Kahneman & Tversky, 1979) maintains that…

  16. Influence of asymmetrical drawing radius deviation in micro deep drawing

    Science.gov (United States)

    Heinrich, L.; Kobayashi, H.; Shimizu, T.; Yang, M.; Vollertsen, F.

    2017-09-01

    Nowadays, an increasing demand for small metal parts in electronic and automotive industries can be observed. Deep drawing is a well-suited technology for the production of such parts due to its excellent qualities for mass production. However, the downscaling of the forming process leads to new challenges in tooling and process design, such as high relative deviation of tool geometry or blank displacement compared to the macro scale. FEM simulation has been a widely-used tool to investigate the influence of symmetrical process deviations as for instance a global variance of the drawing radius. This study shows a different approach that allows to determine the impact of asymmetrical process deviations on micro deep drawing. In this particular case the impact of an asymmetrical drawing radius deviation and blank displacement on cup geometry deviation was investigated for different drawing ratios by experiments and FEM simulation. It was found that both variations result in an increasing cup height deviation. Nevertheless, with increasing drawing ratio a constant drawing radius deviation has an increasing impact, while blank displacement results in a decreasing offset of the cups geometry. This is explained by different mechanisms that result in an uneven cup geometry. While blank displacement leads to material surplus on one side of the cup, an unsymmetrical radius deviation on the other hand generates uneven stretching of the cups wall. This is intensified for higher drawing ratios. It can be concluded that the effect of uneven radius geometry proves to be of major importance for the production of accurately shaped micro cups and cannot be compensated by intentional blank displacement.

  17. Development of engineering drawing ability for emerging engineering education

    Science.gov (United States)

    Guo, Jian-Wen; Cao, Xiao-Chang; Xie, Li; Jin, Jian-Jun; Wang, Chu-Diao

    2017-09-01

    Students majoring in engineering is required by the emerging engineering education (3E) in the aspect of their ability of engineering drawing. This paper puts forward training mode of engineering drawing ability for 3E. This mode consists of three kinds of training including training in courses, training in competitions and training in actual demand. We also design the feasible implementation plan and supplies viable references to carry out the mode.

  18. Evaluation of deep drawing force under different friction conditions

    OpenAIRE

    Lăzărescu Lucian; Banabic Dorel

    2017-01-01

    The purpose of this study is to investigate the variation of the required punch load during the deep drawing process under different friction conditions. In this regards, several deep-drawing tests of cylindrical cups were conducted under four friction conditions at the tool–blank interface. The first case was the dry deep-drawing, considered as a reference friction condition, while in the other three cases hydraulic oil, lithium-based grease and animal fat were used as lubricants. For each f...

  19. Animated construction of line drawings

    KAUST Repository

    Fu, Hongbo; Zhou, Shizhe; Liu, Ligang; Mitra, Niloy J.

    2011-01-01

    system produces plausible animated constructions of input line drawings, with no or little user intervention. We test our algorithm on a range of input sketches, with varying degree of complexity and structure, and evaluate the results via a user study

  20. HippoDraw and Hippoplotamus

    International Nuclear Information System (INIS)

    Gravina, M.F.; Kunz, P.F.; Pavel, T.J.; Rensing, P.E.

    1992-02-01

    Hippo Draw is a result of research into finding better ways to visualize the kind of statistical data that is so common in high energy physics analyses. In these analyses, frequency distributions are visualized as histograms, contour plots, scatter plots, etc. Traditionally, one used a library of subroutines, called a histogram package, within one's analysis programs to create and display such distributions. HippoDraw is a NeXTstep application for viewing statistical data. It has several unique features which make viewing data distributions highly interactive. It also incorporates simple drawing tools. HippoDraw is written in Objective-C and uses the Hippoplotamus library package which handles the n-tuples and displays. Hippoplotamus is written in ANSI C. 4 refs

  1. 3D Projection Installations

    DEFF Research Database (Denmark)

    Halskov, Kim; Johansen, Stine Liv; Bach Mikkelsen, Michelle

    2014-01-01

    Three-dimensional projection installations are particular kinds of augmented spaces in which a digital 3-D model is projected onto a physical three-dimensional object, thereby fusing the digital content and the physical object. Based on interaction design research and media studies, this article ...... Fingerplan to Loop City, is a 3-D projection installation presenting the history and future of city planning for the Copenhagen area in Denmark. The installation was presented as part of the 12th Architecture Biennale in Venice in 2010....

  2. TESLA accelerator installation

    International Nuclear Information System (INIS)

    Neskovic, N.; Ostojic, R.; Susini, A.; Milinkovic, Lj.; Ciric, D.; Dobrosavljevic, A.; Brajuskovic, B.; Cirkovic, S.; Bojovic, B.; Josipovic, M.

    1992-01-01

    The TESLA accelerator Installation is described. Its main parts are the VINCY Cyclotron, the multiply charged heavy-ion mVINIS Ion Source, and the negative light-ion pVINIS Ion Source. The Installation should be the principal installation of a regional center for basic and applied research in nuclear physics, atomic physics, surface physics and solid state physics, for production of radioisotopes, for research and therapy in nuclear medicine. The first extraction of the ion beam from the Cyclotron is planned for 1995. (R.P.) 3 refs.; 1 fig

  3. Deterritorializing Drawing - transformation/deformation

    DEFF Research Database (Denmark)

    Brabrand, Helle

    2012-01-01

    but also from within by sensations, body ‘images’ are different to all other images. Twisting these body images make a mode of operation of art. The paper will address the above issues discussing modes of operation and appearance of my actual project. Acting in the reality of drawing, the project confront...... the body, situated in real time and depth, with drawing transforming and deforming time and depth....

  4. Children's drawings of significant figures for a peer or an adult audience

    OpenAIRE

    Burkitt, Esther; Watling, Dawn; Murray, Lucy

    2011-01-01

    The present study assessed if children would present different information in their drawings of emotion eliciting stimuli when they believed that an adult or a child audience would view their drawings. Seventy-five 6-year-olds (44 boys and 31 girls) were allocated to three groups: the reference group, the child audience group and the adult audience group. All children completed a drawing session where they first drew a neutral uncharacterised figure, followed by drawings of a sad and a happy ...

  5. Construction, fabrication, and installation

    International Nuclear Information System (INIS)

    1992-05-01

    This standard specifies the construction, fabrication, and installation requirements that apply to concrete containment structures of a containment system designated as class containment components, parts and appurtenances for nuclear power plants

  6. Visiting the SPS installation

    CERN Multimedia

    1975-01-01

    ...., Guenther Loehr, Hans Horisberger walk along the SPS tunnel: here, on the right, an absorber block of 22 tons for beam dumping in the external beam lines. The chariot serves for the installation of the block.

  7. Biggest semiconductor installed

    CERN Multimedia

    2008-01-01

    Scientists and technicians at the European Laboratory for Particle Physics, commonly known by its French acronym CERN (Centre Europen pour la Recherche Nuclaire), have completed the installation of the largest semiconductor silicon detector.

  8. Sizewell 'B' cable installation

    International Nuclear Information System (INIS)

    Gemmell, D.R.

    1992-01-01

    N G Bailey and Co. Ltd., UK were awarded the contract for the procurement, manufacture, works testing, works finishing, supply, delivery, off-loading, storage, installation, site finishing, preservation, setting to work and site testing of the following; the main cable installation throughout the Station including the addition of the Radioactive Waste Building, earthing and lightning protection installation, cable supporting steelwork and carriers and glanding and termination of cables. The cabling installation comprises power distribution, control and instrumentation cabling including all the associated cabling accessories, terminal boxes and similar components. The way that the contract was set-up, awarded and is now being carried out is described. Planning and industrial relations have been key features of the contract. (Author)

  9. Drawing conclusions: a re-examination of empirical and conceptual bases for psychological evaluation of children from their drawings.

    Science.gov (United States)

    Thomas, G V; Jolley, R P

    1998-05-01

    Although consideration of children's art work (usually drawings) in clinical investigations of children referred to psychologists is fairly common, there is little evidence for the reliability and validity of such assessments. We consider a variety of possible mechanisms which could operate to influence the characteristics of children's drawings, and review the evidence that such mechanisms operate to allow meaningful psychological evaluations of children from their drawings. The problem for making a reliable interpretation of the significance of a drawing is that a given feature could plausibly support several very different interpretations, depending which of many possible processes was active or dominant in the production of the drawing. Evidence from studies of clinical populations and experimental studies with non-selected samples are reviewed in the light of these possibilities. The review indicates that drawings are inaccurate and unreliable as personality or state assessments but can be influenced by children's emotional attitudes towards the topics depicted. The form of that expression, however, may be personal and idiosyncratic. Analogue studies of these effects undertaken with non-clinical samples under controlled conditions have produced mixed results. At best the reported effects are small. Children's drawings on their own are too complexly determined and inherently ambiguous to be reliable sole indicators of the emotional experiences of the children who drew them. Further research is needed to establish the extent to which such drawings can usefully facilitate assessment of children by other means or provide useful support as one of several converging lines of evidence.

  10. 37 CFR 1.152 - Design drawings.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Design drawings. 1.152... Design drawings. The design must be represented by a drawing that complies with the requirements of § 1... are not permitted in a design drawing. Photographs and ink drawings are not permitted to be combined...

  11. Method for laboratory tests on noise emission from appliances used in water supply installations. Part 2:mounting and operating conditions for draw off taps and mixing valves; Kyusui kigu hasseion no jikkenshitsu sokuteiho dai2bu,. Kyusui oyobi kongo suisen no toritsuke houho narabini sado joken

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    This standard prescribes the laboratory of the water utensil occurrence sound prescribed with JIS A 1424-1 about the installation method of a water stopper to measure water utensil occurrence sound, and the mixed water stopper and the operation condition by the way of examining it, the test device in the way of measuring it. Or, the water stopper made the target, and a mixed water stopper were decided to be designed by the water pressure of the range of 0.1 - 0.5 MPa so that the building (sink, wash and bathtub) might do the use of the cold water in the neighborhood of the building and the warm water. The valve, which has an automatic temperature adjustment, mixed water stopper; a direct exit to the inside is excluded from the object. Moreover, an electric operation dialect is a combination device and this is excluded from the object. (NEDO)

  12. Engineering task plan for the development, fabrication and installation of rotary mode core sample truck grapple hoist box level wind system

    International Nuclear Information System (INIS)

    BOGER, R.M.

    1999-01-01

    This Engineering Task Plan is to design, generate fabrication drawings, fabricate, test, and install the grapple hoist level wind system for Rotary Mode Core Sample Trucks (RMCST) 3 and 4. Deliverables will include generating fabrication drawings, fabrication of one level wind system, updating fabrication drawings as required, and installation of level wind systems on RMCST 3 or 4. The installation of the level wind systems will be done during a preventive maintenance outage

  13. Capping off installation

    CERN Multimedia

    2006-01-01

    Installation of the cathode strip chambers for the muon system on the CMS positive endcap has been completed. Technicians install one of the last muon system cathode strip chambers on the CMS positive endcap. Like successfully putting together the pieces of a giant puzzle, installation of the muon system cathode strip chambers on one of the CMS endcaps has been completed. Total installation of the cathode strip chambers (CSC) is now 91 percent complete; only one ring of chambers needs to be mounted on the remaining endcap to finish installation of the entire system. To guarantee a good fit for the 468 total endcap muon system CSCs, physicists and engineers from the collaboration spent about 10 years carefully planning the design. The endcap muon system's cables, boxes, pipes and other parts were designed and integrated using a 3D computerized model. 'It took a long time to do all the computer modelling, but in the long run it saved us an enormous amount of time because it meant that everything fit together,...

  14. Projective configurations in projectivegeometrical drawings

    Directory of Open Access Journals (Sweden)

    Ivashchenko Andrey Viktorovich

    2015-05-01

    Full Text Available The article focuses on the optimization of the earlier discussed computer method of obtaining new forms of polyhedra based on projective geometry drawings (trace Diagrams.While working on getting new multifaceted forms by projective geometry methods based on the well-known models of polyhedra on the first stage of the work it is required to calculate the parameters of projective geometry drawings, and then to build them. This is an often used apparatus of analytical geometry. According to it, at first the parameters of the polyhedron (core system of planes are calculated, then we obtain the equation of the plane of the face of the polyhedron, and finally we obtain the equations of lines the next plane faces on the selected curve plane. At each stage of application such a method requires the use of the algorithms of floating point arithmetic, on the one hand, leads to some loss of accuracy of the results and, on the other hand, the large amount of computer time to perform these operations in comparison with integer arithmetic operations.The proposed method is based on the laws existing between the lines that make up the drawing - the known configurations of projective geometry (complete quadrilaterals, configuration of Desargues, Pappus et al..The authors discussed in detail the analysis procedure of projective geometry drawing and the presence of full quadrilaterals, Desargues and Pappus configurations in it.Since the composition of these configurations is invariant with respect to projective change of the original nucleus, knowing them, you can avoid the calculations when solving the equations for finding direct projective geometry drawing analytically, getting them on the basis of belonging to a particular configuration. So you can get a definite advantage in accuracy of the results, and in the cost of computer time. Finding these basic configurations significantly enriches the set of methods and the use of projective geometry drawings.

  15. Electroplastic drawing of stainless steels

    International Nuclear Information System (INIS)

    Troitskij, O.A.; Spitsyn, V.I.; Sokolov, N.V.; Ryzhkov, V.G.

    1977-01-01

    Effect of electroplastic drawing on mechanical, magnetic and electrical properties of wire of 12Kh18N10T and Kh13N13M2 steels was studied. Pulse, direct and alternating currents were used. Direct and alternating current densities were 400 A/mm 2 , mean density of pulse current was 200 A/mm 2 . The investigations have shown that the current density increase results in decreasing the wire strengthening intensity though in increasing plastic properties. As a result of electroplastic drawing the growth of magnetic characteristics of wire occurs

  16. Python Introduction and Installation

    Directory of Open Access Journals (Sweden)

    William J. Turkel

    2012-07-01

    Full Text Available This first lesson in our section on dealing with Online Sources is designed to get you and your computer set up to start programming. We will focus on installing the relevant software – all free and reputable – and finally we will help you to get your toes wet with some simple programming that provides immediate results. In this opening module you will install the Python programming language, the Beautiful Soup HTML/XML parser, and a text editor. Screencaps provided here come from Komodo Edit, but you can use any text editor capable of working with Python. Here’s a list of other options: Python Editors. Once everything is installed, you will write your first programs, “Hello World” in Python and HTML.

  17. Solar heating and hot water system installed at the Senior Citizen Center, Huntsville, Alabama

    Science.gov (United States)

    1980-01-01

    The solar energy system installed at the Huntsville Senior Citizen Center is described. Detailed drawings of the complete system and discussions of the planning, the hardware, recommendations, and other pertinent information are presented.

  18. Handbook of graph drawing and visualization

    CERN Document Server

    Tamassia, Roberto

    2013-01-01

    Planarity Testing and Embedding Maurizio PatrignaniCrossings and Planarization Christoph Buchheim, Markus Chimani, Carsten Gutwenger, Michael Jünger, and Petra MutzelSymmetric Graph Drawing Peter Eades and Seok-Hee HongProximity Drawings Giuseppe LiottaTree Drawing Algorithms Adrian RusuPlanar Straight-Line Drawing Algorithms Luca VismaraPlanar Orthogonal and Polyline Drawing Algorithms Christian A. Duncan and Michael T. GoodrichSpine and Radial Drawings Emilio Di Giacomo, Walter Didimo, and Giuseppe LiottaCircular Drawing Algorithms Janet M. Six and Ioannis G. TollisRectangular Drawing Algori

  19. Python Introduction and Installation

    OpenAIRE

    William J. Turkel; Adam Crymble

    2012-01-01

    This first lesson in our section on dealing with Online Sources is designed to get you and your computer set up to start programming. We will focus on installing the relevant software – all free and reputable – and finally we will help you to get your toes wet with some simple programming that provides immediate results. In this opening module you will install the Python programming language, the Beautiful Soup HTML/XML parser, and a text editor. Screencaps provided here come from Komodo ...

  20. Logistics of LEP installation

    International Nuclear Information System (INIS)

    Genier, C.; Capper, S.

    1988-01-01

    The size of the LEP project, coupled with the tight construction schedules, calls for organized planning, logistics, monitoring and control. This is being carried out at present using tools such as ORACLE the Relational Database Management System, running on a VAX cluster for data storage and transfer, micro-computers for on-site follow-up, and PC's running Professional ORACLE, DOS and XENIX linked to a communications network to receive data feedback concerning transport and handling means. Following over 2 years of installations, this paper presents the methods used for the logistics of installation and their results

  1. Electrical installations technology

    CERN Document Server

    Whitfield, J F

    1968-01-01

    Electrical Installations Technology covers the syllabus of the City and Guilds of London Institute course No. 51, the "Electricians B Certificate”. This book is composed of 15 chapters that deal with basic electrical science and electrical installations. The introductory chapters discuss the fundamentals and basic electrical principles, including the concept of mechanics, heat, magnetic fields, electric currents, power, and energy. These chapters also explore the atomic theory of electric current and the electric circuit, conductors, and insulators. The subsequent chapter focuses on the chemis

  2. Field installation and maintenance

    International Nuclear Information System (INIS)

    Prebble, R.E.

    1981-01-01

    The use of a neutron moisture meter for the determination of the water content of soil necessitates the installation of an access tube down which the probe can be lowered. Errors in neutron count rate will be introduced if water enters the air gap between a loose fitting tube and the soil. Errors may also be caused by changes in the soil structure resulting from the techniques for soil removal and from driving the access hole. Access tube materials and dimensions, methods of installation and maintenance of the site are discussed

  3. Evaluation of deep drawing force under different friction conditions

    Directory of Open Access Journals (Sweden)

    Lăzărescu Lucian

    2017-01-01

    Full Text Available The purpose of this study is to investigate the variation of the required punch load during the deep drawing process under different friction conditions. In this regards, several deep-drawing tests of cylindrical cups were conducted under four friction conditions at the tool–blank interface. The first case was the dry deep-drawing, considered as a reference friction condition, while in the other three cases hydraulic oil, lithium-based grease and animal fat were used as lubricants. For each friction case, three levels of blank holding force were adopted, namely 10, 20 and 25 kN. The finite element simulation of the deep-drawing process was used to generate a set of calibration curves. By overlapping the experimental load-stroke curves on the calibration curves, the friction coefficient was estimated for each friction case.

  4. Studying Meaning in Children' Drawings

    Science.gov (United States)

    Hopperstad, Marit Holm

    2010-01-01

    This paper reports on an ethnographic study conducted with two Year 1 classes in two different Norwegian schools. In total, 35 five- and six-year-old children were involved in the study and were observed over a two-month period as they engaged in learning activities that involved drawing. Building on Kress and Van Leeuwen's (1996) theory of a…

  5. Analysing Children's Drawings: Applied Imagination

    Science.gov (United States)

    Bland, Derek

    2012-01-01

    This article centres on a research project in which freehand drawings provided a richly creative and colourful data source of children's imagined, ideal learning environments. Issues concerning the analysis of the visual data are discussed, in particular, how imaginative content was analysed and how the analytical process was dependent on an…

  6. Drawing Analogies to Deepen Learning

    Science.gov (United States)

    Fava, Michelle

    2017-01-01

    This article offers examples of how drawing can facilitate thinking skills that promote analogical reasoning to enable deeper learning. The instructional design applies cognitive principles, briefly described here. The workshops were developed iteratively, through feedback from student and teacher participants. Elements of the UK National…

  7. Physics momentum 'stars' draw majors

    CERN Multimedia

    Lindström, I

    2003-01-01

    Over the past decade, the number of University of Arizona students declaring physics as their major has doubled, amid a national decline. According to a recent report by the National Task Force on Undergraduate Physics, it is the university's dedication to its undergraduate physics program which draws students in (1 page).

  8. Human Figure Drawings in Perspective.

    Science.gov (United States)

    Naglieri, Jack A.

    1993-01-01

    Responds to previous article (Motta, Little, and Tobin, this issue) which reviewed data-based studies on figure drawings and found little support for their validity or use in assessing personality, behavior, emotion, or intellectual functioning. Contends that article is unacceptable for publication in present form, with main criticism being that…

  9. Reference Management Methodologies for Large Structural Models at Kennedy Space Center

    Science.gov (United States)

    Jones, Corey; Bingham, Ryan; Schmidt, Rick

    2011-01-01

    There have been many challenges associated with modeling some of NASA KSC's largest structures. Given the size of the welded structures here at KSC, it was critically important to properly organize model struc.ture and carefully manage references. Additionally, because of the amount of hardware to be installed on these structures, it was very important to have a means to coordinate between different design teams and organizations, check for interferences, produce consistent drawings, and allow for simple release processes. Facing these challenges, the modeling team developed a unique reference management methodology and model fidelity methodology. This presentation will describe the techniques and methodologies that were developed for these projects. The attendees will learn about KSC's reference management and model fidelity methodologies for large structures. The attendees will understand the goals of these methodologies. The attendees will appreciate the advantages of developing a reference management methodology.

  10. The Roles of Emotional Comprehension and Representational Drawing Skill in Children's Expressive Drawing

    Science.gov (United States)

    Brechet, Claire; Jolley, Richard P.

    2014-01-01

    The purpose of the present study was to investigate the roles of emotional comprehension and representational drawing skill in children's expressive drawing. Fifty 7- to 10-year-olds were asked to produce two (happy and sad) expressive drawings, two representational drawings (drawing of a man running and drawing of a house) and to answer the…

  11. Characterization equipment essential/support drawing plan

    International Nuclear Information System (INIS)

    WILSON, G.W.

    1999-01-01

    The purpose of this document is to list the Characterization equipment drawings that are classified as Essential Drawings and Support Drawings. Essential Drawings: Are those drawings identified by the facility staff as necessary to directly support the safe operation of the facility or equipment (HNF 1997a). Support Drawings: Are those drawings identified by facility staff that further describe the design details of structures, systems, or components shown on essential drawings. (HNF 1997a) The Characterization equipment drawings identified in this report are deemed essential drawings as defined in HNF-PRO-242, Engineering Drawing Requirements (HNF 1997a). These drawings will be prepared, revised, and maintained per HNF-PRO-440, Engineering Document Change Control (HNF 1997b). All other Characterization equipment drawings not identified in this document will be considered General drawings until the Characterization Equipment Drawing Evaluation Report (Wilson 1998) is updated during fiscal year 1999. Trucks 1 and 2 drawings are not included in this revision of the essential drawing list due to uncertainty about future use

  12. Nuclear Installations Act 1969

    International Nuclear Information System (INIS)

    1969-01-01

    The purpose of this Act is to amend the Nuclear Installations Act 1965 to bring it into full compliance with the international conventions on nuclear third party liability to which the United Kingdom is a Signatory, namely, the Paris Convention, the Brussels Supplementary Convention and the Vienna Convention. (NEA) [fr

  13. Computer Assisted Drafting (CNC) Drawings. Drafting Module 6. Instructor's Guide.

    Science.gov (United States)

    Missouri Univ., Columbia. Instructional Materials Lab.

    This Missouri Vocational Instruction Management System instructor's drafting guide has been keyed to the drafting competency profile developed by state industry and education professionals. This unit contains information on computer-assisted drafting drawings. The guide contains a cross-reference table of instructional materials and 20 worksheets.…

  14. Tolley's industrial and commercial gas installation practice

    CERN Document Server

    Hazlehurst, John

    2010-01-01

    This is the third of three essential reference volumes for those concerned with the installation and servicing of domestic and industrial gas equipment. This volume explains the basic principles underlying the practical and theoretical aspects of installing and servicing gas appliances and associated equipment, from the basics of combustion, to burners, pressure and flow, transfer of heat, controls, as well as materials and processes, electrical aspects, and metering and measuring devices. Covering both Natural Gas and Liquefied Petroleum Gas, the many illustrations and worked examples include

  15. Natural gas fuelling stations installation code

    Energy Technology Data Exchange (ETDEWEB)

    Barrigar, C; Burford, G; Adragna, M; Hawryn, S

    2004-07-01

    This Canadian Standard applies to natural gas fuelling stations that can be used for fleet and public dispensing operations. This document is divided into 11 sections that address the scope of the Standard; definitions and reference publications; general requirements; compressors; storage; dispensing; flow control devices; storage vessel dispatch and receiving; design, installation and testing of piping, tubing and fittings; and installation of vehicle refuelling appliances (VRAs) connected to storage piping. The most recent revision to the Standard includes requirements for indoor fuelling of natural gas vehicles. This Standard, like all Canadian Standards, was subject to periodic review and was most recently reaffirmed in 2004. tabs., figs.

  16. Leukaemia and nuclear installations

    International Nuclear Information System (INIS)

    Beral, V.

    1990-01-01

    The editorial comments on the paper by Gardner et al (BMJ 17 February 1990) which suggests a link between leukaemia and the occupational exposure of fathers to radiation and draws attention to the very small numbers involved and the only other relevant data available from the children of A-bomb survivors which do not show evidence of increased risk of leukaemia in the offspring. (author)

  17. Leukaemia and nuclear installations

    International Nuclear Information System (INIS)

    Beral, V.

    1991-01-01

    The editorial comments on the paper by Gardner et al (BMJ 17 Feb 1990) which suggests a link between leukaemia and the occupational exposure of father to radiation and draws attention to the very small numbers involved and the only other relevant data available from the children of A-bomb survivors which do not show evidence of increased risk of leukaemia in the offspring. (author). 10 refs

  18. Young Children's Drawings in Problem Solving

    Science.gov (United States)

    Bakar, Kamariah Abu; Way, Jennifer; Bobis, Janette

    2016-01-01

    This paper explores young children's drawings (6 years old) in early number and addition activities in Malaysia. Observation, informal interviews and analysis of drawings revealed two types of drawing, and gave insight into the transitional process required for children to utilise drawings in problem solving. We argue the importance of valuing and…

  19. Try This: Draw Like a Scientist

    Science.gov (United States)

    Preston, Christine

    2016-01-01

    Young children love to draw, and should be encouraged to explore drawing as a communication tool. Drawing is a means by which children can express their thoughts, interests and feelings, long before they learn to write. We know that: "children's drawings are vehicles for expression and communication" (Chang, 2012, p. 187). This form of…

  20. 37 CFR 1.165 - Plant drawings.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Plant drawings. 1.165 Section... Plant drawings. (a) Plant patent drawings should be artistically and competently executed and must... required by the examiner. The drawing must disclose all the distinctive characteristics of the plant...

  1. 37 CFR 1.437 - The drawings.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false The drawings. 1.437 Section 1... Application § 1.437 The drawings. (a) Drawings are required when they are necessary for the understanding of the invention (PCT Art. 7). (b) The physical requirements for drawings are set forth in PCT Rule 11...

  2. Drawing on Curiosity: Between Two Worlds

    Science.gov (United States)

    Wigglesworth, Ron

    2017-01-01

    This narrative of my research on drawing shares my experience of relearning drawing by hand and how the act of drawing can stimulate curiosity. This article examines its potential to enhance learning/observation in science. It describes a kinaesthetic drawing methodology and addresses pedagogical solutions for overcoming a student's declaration…

  3. 37 CFR 2.51 - Drawing required.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Drawing required. 2.51... COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Drawing § 2.51 Drawing required. (a) In an application under section 1(a) of the Act, the drawing of the mark must be a substantially exact representation of the mark...

  4. Feynman diagram drawing made easy

    International Nuclear Information System (INIS)

    Baillargeon, M.

    1997-01-01

    We present a drawing package optimised for Feynman diagrams. These can be constructed interactively with a mouse-driven graphical interface or from a script file, more suitable to work with a diagram generator. It provides most features encountered in Feynman diagrams and allows to modify every part of a diagram after its creation. Special attention has been paid to obtain a high quality printout as easily as possible. This package is written in Tcl/Tk and in C. (orig.)

  5. Drawing Euler Diagrams with Circles

    OpenAIRE

    Stapleton, Gem; Zhang, Leishi; Howse, John; Rodgers, Peter

    2010-01-01

    Euler diagrams are a popular and intuitive visualization tool which are used in a wide variety of application areas, including biological and medical data analysis. As with other data visualization methods, such as graphs, bar charts, or pie charts, the automated generation of an Euler diagram from a suitable data set would be advantageous, removing the burden of manual data analysis and the subsequent task of drawing an appropriate diagram. Various methods have emerged that automatically dra...

  6. MECHANISM TO DRAW MACLAURIN TRISECTRIX

    Directory of Open Access Journals (Sweden)

    Mirela CHERCIU

    2013-05-01

    Full Text Available It is used a geometrical method for generating Maclaurin trisectrix and based on it , thesynthesis of a mechanism that can draw it, is made. The structure of the found mechanism is R-RTRTtype, having two driving elements with correlated movements. This mechanism is analysedand the desired curve is obtained just for certain dimensions of the mechanism. The mechanism’smovement is studied based on some diagrams and different outputs are obtained for certain initialdimensions of the mechanism’s.

  7. Drawing plan for solid works

    International Nuclear Information System (INIS)

    Lee, Kuk Hwan; Kim, Hyung Seop; Yu, Dae Won

    2004-02-01

    This book deals with beginning solid works 2003, setting system option, setting tool group, setting document and storing part template file. It also introduces works of basic solid works modeling such as making of square, circuit, plate washer, square column, block I, block II, link, cover plate, position block and housing. The last part explains drawing of fix block, stopper plate III, bracket, cover, belt pulley, circle plate, square, block, stopper block, angle block, washer, circle block and link.878

  8. BROOKHAVEN: RHIC installation

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    This summer, the first superconducting magnet was installed in 3.8 kilometre tunnel for Brookhaven's RHIC heavy ion collider (October, page 31). Manufactured by Northrop Grumman's Electronics and System Integration Division, the magnet is the first of RHIC's 373 dipoles. In addition to the dipoles, Northrop Grumman will also provide 432 RHIC quadrupoles. The first quadrupole was delivered on 8 April, a month before the first dipole arrived for onsite testing prior to installation. RHIC will need 1,700 superconducting magnets - dipoles, quadrupoles, sextupoles and correcting magnets, 1,200 of which will be built by industry and the rest built at Brookhaven. The 300 sextupoles are being supplied by Everson Electric

  9. Entropy and Digital Installation

    Directory of Open Access Journals (Sweden)

    Susan Ballard

    2005-01-01

    Full Text Available This paper examines entropy as a process which introduces ideas of distributed materiality to digital installation. Beginning from an analysis of entropy as both force and probability measure within information theory and it’s extension in Ruldof Arnheim’s text ‘Entropy and Art” it develops an argument for the positive rather thannegative forces of entropy. The paper centres on a discussion of two recent works by New Zealand artists Ronnie van Hout (“On the Run”, Wellington City Gallery, NZ, 2004 and Alex Monteith (“Invisible Cities”, Physics Room Contemporary Art Space, Christchurch, NZ, 2004. Ballard suggests that entropy, rather than being a hindrance to understanding or a random chaotic force, discloses a necessary and material politics of noise present in digital installation.

  10. Installation Strategic Planning Guidebook

    Science.gov (United States)

    2012-05-01

    Installation natural resource concerns (for example, wetlands , number of endangered species, water use restrictions, encroachment on training lands...Koehler Publishing, 1994 7. Strategy Safari – A Guided Tour Through the Wilds of Strategic Management by Henry Mintzberg, Bruce Ahlstrand, and...T. (1987). NY: Knopf 36. Shaping Strategic Planning: Frogs, Dragons, Bees and Turkey Tails. Pfeiffer, J. W., Goodstein, L. D. & Nolan, T. M. (1989

  11. Installing the ALICE detector

    CERN Multimedia

    Maximilien Brice

    2006-01-01

    The huge iron yoke in the cavern at Point 2 in the LHC tunnel is prepared for the installation of the ALICE experiment. The yoke is being reused from the previous L3 experiment that was located at the same point during the LEP project from 1989 to 2000. ALICE will be inserted piece by piece into the cradle where it will be used to study collisions between two beams of lead ions.

  12. SNRIU nuclear installation modifications

    International Nuclear Information System (INIS)

    Goroshanskyi, Andrii

    2013-01-01

    Design stages of Nuclear Instalations (NI): NI design is performed in three stages: • Feasibility study: - Feasibility study is developed on the basis of the customer task for production facilities and linear facilities engineering and transport infrastructure that require detailed study of relevant decisions and identify options for and feasibility of construction. • Design: - The design is developed on the basis of design task, initial data and approved the previous stage under three-stage design. • Detailed documentation

  13. Problem and design drawing for solution of precision design drawing and machine design

    International Nuclear Information System (INIS)

    Heo, Gil

    1982-04-01

    The contents of this book are basic of design drawing, problem of machine design, problem of precision design drawing, problem of planar figure of sheet metal, design drawing for solution of machine design, design drawing for solution of precision design drawing and design drawing for planar figure of sheet metal. It tells of the problems and gives the solutions on precision design drawing and machine design.

  14. The Roles of Emotional Comprehension and Representational Drawing Skill in Children’s Expressive Drawing

    OpenAIRE

    Brechet, Claire; JOLLEY, Richard

    2014-01-01

    The purpose of the present study was to investigate the roles of emotional comprehension and representational drawing skill in children’s expressive drawing. Fifty 7- to 10-year-olds were asked to produce two (happy and sad) expressive drawings, two representational drawings (drawing of a man running and drawing of a house) and to answer the Test of Emotion Comprehension (Pons & Harris, 2000). The expressive drawings were assessed on the number of expressive subject matter themes (‘content ex...

  15. Safety of nuclear installations

    International Nuclear Information System (INIS)

    1991-01-01

    In accordance with the Nuclear Energy Act, a Licence may only be issued if the precautions required by the state of the art have been taken to prevent damage resulting from the construction and operation of the installation. The maximum admissible body doses in the area around the installation which must be observed in planning constructional and other technical protective measures to counter accidents in or at a nuclear power station (accident planning values, are established). According to the Radiological Protection Ordinance the Licensing Authority can consider these precautions to have been taken if, in designing the installation against accidents, the applicant has assumed the accidents which, according to the Safety Criteria and Guidelines for Nuclear Power Stations published in the Federal Register by the Federal Minister of the Interior after hearing the competent senior state authorities, must determine the design of a nuclear power station. On the basis of previous experience from safety analysis, assessment and operation of nuclear power stations, the accident guidelines published here define which accidents are determinative for the safety-related design of PWR power stations and what verification -particularly with regard to compliance with the accident planning values of the Radiological Protection Ordinance -must be provided by the applicant. (author)

  16. First ALICE detectors installed!

    CERN Multimedia

    2006-01-01

    Detectors to track down penetrating muon particles are the first to be placed in their final position in the ALICE cavern. The Alice muon spectrometer: in the foreground the trigger chamber is positioned in front of the muon wall, with the dipole magnet in the background. After the impressive transport of its dipole magnet, ALICE has begun to fill the spectrometer with detectors. In mid-July, the ALICE muon spectrometer team achieved important milestones with the installation of the trigger and the tracking chambers of the muon spectrometer. They are the first detectors to be installed in their final position in the cavern. All of the eight half planes of the RPCs (resistive plate chambers) have been installed in their final position behind the muon filter. The role of the trigger detector is to select events containing a muon pair coming, for instance, from the decay of J/ or Y resonances. The selection is made on the transverse momentum of the two individual muons. The internal parts of the RPCs, made o...

  17. Solar heating and hot water system installed at Charlotte Memorial Hospital, Charlotte, North Carolina

    Science.gov (United States)

    1981-01-01

    Detailed information regarding the design and installation of a heating and hot water system in a commercial application is given. This information includes descriptions of system and building, design philosophy, control logic operation modes, design and installation drawing and a brief description of problems encountered and their solutions.

  18. Young children show representational flexibility when interpreting drawings.

    Science.gov (United States)

    Allen, Melissa L; Nurmsoo, Erika; Freeman, Norman

    2016-02-01

    Drawings can be ambiguous and represent more than one entity. In three experiments, we examine whether young children show representational flexibility by allowing one picture to be called by a second name. We also evaluate the hypothesis that children who are representationally flexible see the artist's intention as binding, rather than changeable. In Experiment 1, an artist declared what she intended to draw (e.g. a balloon) but then produced an ambiguous drawing. Children were asked whether the drawings could be interpreted differently (e.g. 'could this be a lollipop?') in the presence of a perceptually similar or dissimilar distractor (e.g., lollipop or snake). Six-year-olds accepted two labels for drawings in both conditions, but four-year-olds only did so in the dissimilar condition. Experiment 2 probed each possible interpretation more deeply by asking property questions (e.g., 'does it float?, does it taste good?'). Preschoolers who understood that the ambiguous drawing could be given two interpretations nevertheless mostly endorsed only properties associated with the prior intent. Experiment 3 provided converging evidence that 4-year-olds were representationally flexible using a paradigm that did not rely upon modal questioning. Taken together, our results indicate that even 4-year-olds understand that pictures may denote more than one referent, they still think of the symbol as consistent with the artist's original intention. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. Drawing the line with leukaemia

    International Nuclear Information System (INIS)

    Taylor, D.; Wilkie, D.

    1988-01-01

    The cluster of cases of childhood leukaemia near nuclear installations in the United Kingdom are considered. The paper examines whether these clusters have occurred by chance, or are an artefact of the statistical methodology, or the result of variability in the reporting of these leukaemias, or the result of some local agent, such as radiation. Statistical methodology including tests of significance involve choices available to researchers when boundaries of the test cells are selected. Choice of the wrong boundaries can lead to misleading results, such as in the town of Lydney, Gloucestershire where an apparent cluster of leukaemias was reported in 1987. The quality of data is also a problem, and there is evidence that some registration of childhood leukaemia is 'missed'. The authors conclude that it is easy to manipulate data and produce scare stories, and research workers on clusters of leukaemia near nuclear installations must be vigilant about the methods they employ. (U.K.)

  20. Direct friction measurement in draw bead testing

    DEFF Research Database (Denmark)

    Olsson, David Dam; Bay, Niels; Andreasen, Jan Lasson

    2005-01-01

    The application of draw beads in sheet metal stamping ensures controlled drawing-in of flange parts. Lubrication conditions in draw beads are severe due to sliding under simultaneous bending. Based on the original draw bead test design by Nine [1] comprehensive studies of friction in draw beads...... have been reported in literature. A major drawback in all these studies is that friction is not directly measured, but requires repeated measurements of the drawing force with and without relative sliding between the draw beads and the sheet material. This implies two tests with a fixed draw bead tool...... and a freely rotating tool respectively, an approach, which inevitably implies large uncertainties due to scatter in the experimental conditions. In order to avoid this problem a new draw bead test is proposed by the authors measuring the friction force acting on the tool radius directly by a build...

  1. Installation procedures (IP) for the enhanced logistics intratheater support tool (ELIST) global data segment version 8.1.0.0, database instance segment version 8.1.0.0, ...[elided] and reference data segment version 8.1.0.0 for solaris 7.; TOPICAL

    International Nuclear Information System (INIS)

    Dritz, K.

    2002-01-01

    This document is the Installation Procedures (IP) for the DII COE Enhanced Logistics Intraheater Support Tool (ELIST) mission application. It tells how to install and deinstall the seven segments of the mission application

  2. Samus Toroid Installation Fixture

    Energy Technology Data Exchange (ETDEWEB)

    Stredde, H.; /Fermilab

    1990-06-27

    The SAMUS (Small Angle Muon System) toroids have been designed and fabricated in the USSR and delivered to D0 ready for installation into the D0 detector. These toroids will be installed into the aperture of the EF's (End Toroids). The aperture in the EF's is 72-inch vertically and 66-inch horizontally. The Samus toroid is 70-inch vertically by 64-inch horizontally by 66-inch long and weighs approximately 38 tons. The Samus toroid has a 20-inch by 20-inch aperture in the center and it is through this aperture that the lift fixture must fit. The toroid must be 'threaded' through the EF aperture. Further, the Samus toroid coils are wound about the vertical portion of the aperture and thus limit the area where a lift fixture can make contact and not damage the coils. The fixture is designed to lift along a surface adjacent to the coils, but with clearance to the coil and with contact to the upper steel block of the toroid. The lift and installation will be done with the 50 ton crane at DO. The fixture was tested by lifting the Samus Toroid 2-inch off the floor and holding the weight for 10 minutes. Deflection was as predicted by the design calculations. Enclosed are sketches of the fixture and it relation to both Toroids (Samus and EF), along with hand calculations and an Finite Element Analysis. The PEA work was done by Kay Weber of the Accelerator Engineering Department.

  3. Nuclear reactor installation

    International Nuclear Information System (INIS)

    Keller, W.

    1976-01-01

    A nuclear reactor installation includes a pressurized-water coolant reactor vessel and a concrete biological shield surrounding this vessel. The shield forms a space between it and the vessel large enough to permit rapid escape of the pressurized-water coolant therefrom in the event the vessel ruptures. Struts extend radially between the vessel and shield for a distance permitting normal radial thermal movement of the vessel, while containing the vessel in the event it ruptures, the struts being interspaced from each other to permit rapid escape of the pressurized-water coolant from the space between the shield and the vessel

  4. Decommissioning nuclear installations

    International Nuclear Information System (INIS)

    Dadoumont, J.

    2010-01-01

    When a nuclear installation is permanently shut down, it is crucial to completely dismantle and decontaminate it on account of radiological safety. The expertise that SCK-CEN has built up in the decommissioning operation of its own BR3 reactor is now available nationally and internationally. Last year SCK-CEN played an important role in the newly started dismantling and decontamination of the MOX plant (Mixed Oxide) of Belgonucleaire in Dessel, and the decommissioning of the university research reactor Thetis in Ghent.

  5. Fires of sodium installations

    International Nuclear Information System (INIS)

    Hajek, L.; Tlalka, R.

    1984-01-01

    A survey is presented of the literature dealing with fires of sodium installations between 1974 and 1981. Also described are three experimental fires of ca 50 kg of sodium in an open area, monitored by UJV Rez. The experimental conditions of the experiments are described and a phenomenological description is presented of the course of the fires. The experiments showed a relationship between wind velocity in the area surrounding the fire and surface temperature of the sodium flame. Systems analysis methods were applied to sodium area, spray and tube fires. (author)

  6. Worldwide installed geothermal power

    International Nuclear Information System (INIS)

    Laplaige, P.

    1995-01-01

    Worldwide electric energy production data are easy to compile, according to the informations given by individual countries. On the contrary, thermal applications of geothermics are difficult to quantify due to the variety of applications and the number of countries concerned. Exhaustive informations sometimes cannot be obtained from huge countries (China, Russia..) because of data centralization problems or not exploitable data transmission. Therefore, installed power data for geothermal heat production are given for 26 countries over the 57 that have answered the International Geothermal Association questionnaire. (J.S.). 1 fig., 2 tabs., 1 photo

  7. Wireless installation standard

    International Nuclear Information System (INIS)

    Lim, Hwang Bin

    2007-12-01

    This is divided six parts which are radio regulation law on securing of radio resource, use of radio resource, protection of radio resource, radio regulation enforcement ordinance with securing, distribution and assignment of radio regulation, radio regulation enforcement regulation on utility of radio resource and technical qualification examination, a wireless installation regulation of technique standard and safety facility standard, radio regulation such as certification regulation of information communicative machines and regulation of radio station on compliance of signal security, radio equipment in radio station, standard frequency station and emergency communication.

  8. Nuclear installations sites safety

    International Nuclear Information System (INIS)

    Barber, P.; Candes, P.; Duclos, P.; Doumenc, A.; Faure, J.; Hugon, J.; Mohammadioun, B.

    1988-11-01

    This report is divided into ten parts bearing: 1 Safety analysis procedures for Basis Nuclear Installations sites (BNI) in France 2 Site safety for BNI in France 3 Industrial and transport activities risks for BNI in France 4 Demographic characteristics near BNI sites in France 5 Meteorologic characteristics of BNI sites in France 6 Geological aspects near the BNI sites in France 7 Seismic studies for BNI sites in France 8 Hydrogeological aspects near BNI sites in France 9 Hydrological aspects near BNI sites in France 10 Ecological and radioecological studies of BNI sites in France [fr

  9. Performance of buried pipe installation.

    Science.gov (United States)

    2010-05-01

    The purpose of this study is to determine the effects of geometric and mechanical parameters : characterizing the soil structure interaction developed in a buried pipe installation located under : roads/highways. The drainage pipes or culverts instal...

  10. Make a Drawing. Effects of Strategic Knowledge, Drawing Accuracy, and Type of Drawing on Students' Mathematical Modelling Performance

    Science.gov (United States)

    Rellensmann, Johanna; Schukajlow, Stanislaw; Leopold, Claudia

    2017-01-01

    Drawing strategies are widely used as a powerful tool for promoting students' learning and problem solving. In this article, we report the results of an inferential mediation analysis that was applied to investigate the roles that strategic knowledge about drawing and the accuracy of different types of drawings play in mathematical modelling…

  11. CNGS Reflector installed

    CERN Multimedia

    2006-01-01

    A major component that will help target the CNGS neutrino beam for its 732km journey through the earth's crust, from CERN to the Gran Sasso laboratory in Italy, has been installed in its final position. The transport of the huge magnetic horn reflector through the CNGS access gallery. A team from CNGS and TS/IC, and the contractors DBS, transported the magnetic horn reflector on 5th December, in a carefully conducted operation that took just under two hours. The reflector is 7m long, 1.6m in diameter and 1.6 tonnes in weight. With only a matter of centimetres to spare on either side, the reflector was transported through the CNGS access gallery, before being installed in the experiment's target chamber. The larger of two magnetic horns, the reflector will help refocus sprays of high energy pions and kaons emitted after a 0.5MW stream of protons from the Super Proton Synchrotron (SPS) strikes nucleons in a graphite target. The horns are toroidal magnetic lenses and work with high pulsed currents: 150 kA f...

  12. Heating equipment installation system

    International Nuclear Information System (INIS)

    Meuschke, R.E.; Pomaibo, P.P.

    1991-01-01

    Disclosed is a method for installing a heater unit assembly in a reactor pressure vessel for performance of an annealing treatment on the vessel, the vessel having a vertical axis, being open at the top, being provided at the top with a flange having a horizontal surface, and being provided internally, at a location below the flange, with orientation elements which are asymmetrical with respect to the vertical axis, by the steps of: providing an orientation fixture having an upwardly extending guide member and orientation elements and installing the orientation fixture in the vessel so that the orientation elements of the orientation fixture mate with the orientation elements of the pressure vessel in order to establish a defined position of the orientation fixture in the pressure vessel, and so that the guide member projects above the pressure vessel flange; placing a seal ring in a defined position on the pressure vessel flange with the aid of the guide member; mounting at least one vertical, upwardly extending guide stud upon the seal ring; withdrawing the orientation fixture from the pressure vessel; and moving the heater unit assembly vertically downwardly into the pressure vessel while guiding the heater unit assembly along a path with the aid of the guide stud. 5 figures

  13. Solar Imagery - Composites - Full Sun Drawings - Boulder

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Synoptic Analysis Drawings, also known as Neutral Line (NL) drawings, are produced each day by space weather forecaster at the NOAA National Weather Service (NWS)...

  14. Children's Drawings of Significant Figures for a Peer or an Adult Audience

    Science.gov (United States)

    Burkitt, Esther; Watling, Dawn; Murray, Lucy

    2011-01-01

    The present study assessed if children would present different information in their drawings of emotion eliciting stimuli when they believed that an adult or a child audience would view their drawings. Seventy-five 6-year-olds (44 boys and 31 girls) were allocated to three groups: the reference group, the child audience group and the adult…

  15. [The importance of drawing in adolescence].

    Science.gov (United States)

    Titia Rizzi, Alice

    Teenagers like to draw. A drawing is a fundamental object of creativity in the process of re-construction and change typical of this period. However, theoretical approaches often consider that the evolution of the stages of drawing come to an end in adolescence. It is important to consider the practical and clinical benefit of drawing and to develop expression-based activities which can be carried out with this population. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  16. Drawing Architecture Theory on the City

    NARCIS (Netherlands)

    Altürk, E.

    2009-01-01

    This study is about architectural drawings. I especially address how drawings operate in architecture theory, and stress a particular role that they play in facilitating critique and speculation as theoretical activities. In this sense, I dwell on the capacity of architectural drawing not only as

  17. Drawings as Representations of Children's Conceptions

    Science.gov (United States)

    Ehrlen, Karin

    2009-01-01

    Drawings are often used to obtain an idea of children's conceptions. Doing so takes for granted an unambiguous relation between conceptions and their representations in drawings. This study was undertaken to gain knowledge of the relation between children's conceptions and their representation of these conceptions in drawings. A theory of…

  18. Expanding Music Listening Experience through Drawing

    Science.gov (United States)

    Han, Yo-Jung

    2016-01-01

    Drawing while listening to music provides an opportunity for students to imagine and associate, leading to holistic listening experience. The personal qualitative listening experience triggered by music can be revealed in their drawings. In the process of representing of the listening experience through drawing, students can also increase their…

  19. Site evaluation for nuclear installations. Safety requirements

    International Nuclear Information System (INIS)

    2003-01-01

    This Safety Requirements publication supersedes the Code on the Safety of Nuclear Power Plants: Siting, which was issued in 1988 as Safety Series No. 50-C-S (Rev. 1). It takes account of developments relating to site evaluations for nuclear installations since the Code on Siting was last revised. These developments include the issuing of the Safety Fundamentals publication on The Safety of Nuclear Installations, and the revision of various safety standards and other publications relating to safety. Requirements for site evaluation are intended to ensure adequate protection of site personnel, the public and the environment from the effects of ionizing radiation arising from nuclear installations. It is recognized that there are steady advances in technology and scientific knowledge, in nuclear safety and in what is considered adequate protection. Safety requirements change with these advances and this publication reflects the present consensus among States. This Safety Requirements publication was prepared under the IAEA programme on safety standards for nuclear installations. It establishes requirements and provides criteria for ensuring safety in site evaluation for nuclear installations. The Safety Guides on site evaluation listed in the references provide recommendations on how to meet the requirements established in this Safety Requirements publication. The objective of this publication is to establish the requirements for the elements of a site evaluation for a nuclear installation so as to characterize fully the site specific conditions pertinent to the safety of a nuclear installation. The purpose is to establish requirements for criteria, to be applied as appropriate to site and site-installation interaction in operational states and accident conditions, including those that could lead to emergency measures for: (a) Defining the extent of information on a proposed site to be presented by the applicant; (b) Evaluating a proposed site to ensure that the site

  20. Deterritorializing Drawing - transformation/deformation

    DEFF Research Database (Denmark)

    Brabrand, Helle

    2012-01-01

    the capacity of the body to be affected by change. The everyday and the ceremonial body, the ordinary and the aberrant movement – these poles generate a passage rather than a difference from the one to the other: from attitude or position to gesture or kinaesthetic twist. Known from without through perception...... but also from within by sensations, body ‘images’ are different to all other images. Twisting these body images make a mode of operation of art. The paper will address the above issues discussing modes of operation and appearance of my actual project. Acting in the reality of drawing, the project confront...... criticises figurative as well as abstract painting as passing through the brain and not acting directly upon the senses. Figurative and abstract painting both fail to liberate the Figure, implementing transformation of form, but not attaining deformations of bodies. Bacon, then, is concerned about...

  1. Boundary Drawing in Clinical Work

    DEFF Research Database (Denmark)

    Meier, Ninna

    The aim of this paper is to show how health care professionals temporarily dissolve and redraw boundaries in their everyday work, in order to coordinate clinical work and facilitate collaboration in patient pathways. Boundaries are social constructions that help us make sense of our complex, social...... world. In health care, formal boundaries are important distinctions that separate health care practitioners into medical specialties, professions and organizational departments. But clinical work also relies on the ability of health care practitioners to collaborate around patients in formal...... arrangements or emergent, temporary teams. Focusing on the cognitive and social boundaries we draw to establish identity and connection (to a profession, team or person) the paper shows how health care professionals can use inter-personal relationships to temporarily dismiss formal boundaries. By redrawing...

  2. Deterritorializing Drawing - transformation/deformation

    DEFF Research Database (Denmark)

    Brabrand, Helle

    2012-01-01

    but also from within by sensations, body ‘images’ are different to all other images. Twisting these body images make a mode of operation of art. The paper will address the above issues discussing modes of operation and appearance of my actual project. Acting in the reality of drawing, the project confront...... criticises figurative as well as abstract painting as passing through the brain and not acting directly upon the senses. Figurative and abstract painting both fail to liberate the Figure, implementing transformation of form, but not attaining deformations of bodies. Bacon, then, is concerned about...... deformation, about painting the sensation, which is essentially rhythm, making Figure-rhythm relations appear as vibrations that flow through the body - making resonance. Deleuze, with Bergson, argues that art extracts ’a little time in a pure state’ from the everyday repetitions, and thereby opens...

  3. Growth references

    NARCIS (Netherlands)

    Buuren, S. van

    2007-01-01

    A growth reference describes the variation of an anthropometric measurement within a group of individuals. A reference is a tool for grouping and analyzing data and provides a common basis for comparing populations.1 A well known type of reference is the age-conditional growth diagram. The

  4. On the use of drawing tasks in neuropsychological assessment.

    Science.gov (United States)

    Smith, Alastair D

    2009-03-01

    Drawing tasks have attained a central position in neuropsychological assessment and are considered a rich source of information about the presence (or absence) of cognitive and perceptuo-motor abilities. However, unlike other tests of cognitive impairment, drawing tasks are often administered without reference to normative models of graphic production, and their results are often analyzed qualitatively. I begin this article by delineating the different ways in which drawing errors have been used to indicate particular functional deficits in neurological patients. I then describe models of drawing that have been explicitly based on the errors observed in patient drawings. Finally, the case is made for developing a more sensitive set of metrics in order to quantitatively assess patient performance. By providing a finer grain of analysis to assessment we will not only be better able to characterize the consequences of cognitive dysfunction, but may also be able to more subtly characterize and dissociate patients who would otherwise have been placed in the same broad category of impairment. (PsycINFO Database Record (c) 2009 APA, all rights reserved).

  5. 340 and 310 drawing field verification

    International Nuclear Information System (INIS)

    Langdon, J.

    1996-01-01

    The purpose of the drawing field verification work plan is to provide reliable drawings for the 310 Treated Effluent Disposal Facility (TEDF) and 340 Waste Handling Facility (340 Facility). The initial scope of this work plan is to provide field verified and updated versions of all the 340 Facility essential drawings. This plan can also be used for field verification of any other drawings that the facility management directs to be so updated. Any drawings revised by this work plan will be issued in an AutoCAD format

  6. Installations having pressurised fluid circuits

    International Nuclear Information System (INIS)

    Rigg, S.; Grant, J.

    1977-01-01

    Reference is made to nuclear installations having pressurised coolant flow circuits. Breaches in such circuits may quickly result in much damage to the plant. Devices such as non-return valves, orifice plates, and automatically operated shut-off valves have been provided to prevent or reduce fluid flow through a breached pipe line, but such devices have several disadvantages; they may present large restrictions to normal flow of coolant, and may depend on the operation of ancillary equipment, with consequent delay in bringing them into operation in an emergency. Other expedients that have been adopted to prevent or reduce reverse flow through an upstream breach comprise various forms of hydraulic counter flow brakes. The arrangement described has at least one variable fluid brake comprising a fluidic device connected into a duct in the pressurised circuit, the device having an inlet, an outlet, a vortex chamber between the inlet and outlet, a control jet for introducing fluid into the vortex chamber, connections communicating the inlet and the outlet into one part of the circuit and the control jet into another region at a complementary pressure so that, in the event of a breach in the circuit in one region, fluid passes from the other region to enter the vortex chamber to stimulate pressure to create a flow restricting vortex in the chamber that reduces flow through the breach. The system finds particular application to stream generating pressure tube reactors, such as the steam generating heavy water reactor at UKAEA, Winfrith. (U.K.)

  7. ALARA in European nuclear installations

    International Nuclear Information System (INIS)

    Lefaure, C.; Croft, J.; Pfeffer, W.; Zeevaert, T.

    1995-01-01

    For over a decade the Commission of the European Community has sponsored research projects on the development and practical implementation of the Optimization principle, or as it is often referred to, ALARA. These projects have given rise to a series of successful international Optimization training courses and have provided a significant input to the periodic European Seminars on Optimization, the last one of which took place in April 1993. This paper reviews the approaches to Optimization that have development within Europe and describes the areas of work in the current project. The on-going CEC research project addresses the problem of ALARA and internal exposures, and tries to define procedures for ALARA implementation, taking account of the perception of the hazard as well as the levels of probability of exposure. The relationships between ALARA and work management, and ALARA and decommissioning of installations appear to be other fruitful research areas. Finally, this paper introduces some software for using ALARA decision aiding techniques and databases containing feed back experience developed in Europe

  8. ALARA in European nuclear installations

    Energy Technology Data Exchange (ETDEWEB)

    Lefaure, C. [CEPN, Fontenay-Aux-Roses (France); Croft, J. [NRPB, Chilton, Didcot (United Kingdom); Pfeffer, W. [GRS, Koeln (Germany); Zeevaert, T. [SCK/CEN, Mol (Belgium)

    1995-03-01

    For over a decade the Commission of the European Community has sponsored research projects on the development and practical implementation of the Optimization principle, or as it is often referred to, ALARA. These projects have given rise to a series of successful international Optimization training courses and have provided a significant input to the periodic European Seminars on Optimization, the last one of which took place in April 1993. This paper reviews the approaches to Optimization that have development within Europe and describes the areas of work in the current project. The on-going CEC research project addresses the problem of ALARA and internal exposures, and tries to define procedures for ALARA implementation, taking account of the perception of the hazard as well as the levels of probability of exposure. The relationships between ALARA and work management, and ALARA and decommissioning of installations appear to be other fruitful research areas. Finally, this paper introduces some software for using ALARA decision aiding techniques and databases containing feed back experience developed in Europe.

  9. Learning to Write and Draw

    Science.gov (United States)

    ... Share on Facebook Share on LinkedIn Share via email Print How Your Child’s Writing and Art Changes Over Time Creativity is a ... What Can You Do to Encourage Art and Writing Skills Resources and References Share on Twitter Share on ... Print You might also be interested in Article ...

  10. Solar heating system installed at Jackson, Tennessee. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-10-01

    The solar energy heating system installed at the Coca-Cola Bottling Works in Jackson, Tennessee is described. The system consists of 9480 square feet of Owens-Illinois evacuated tubular solar collectors with attached specular cylindrical reflectors and will provide space heating for the 70,000 square foot production building in the winter, and hot water for the bottle washing equipment the remainder of the year. Component specifications and engineering drawings are included. (WHK)

  11. Solar space and water heating system installed at Charlottesville, Virginia

    Science.gov (United States)

    1980-01-01

    The solar energy system located at David C. Wilson Neuropsychiatric Hospital, Charlottesville, Virginia, is described. The solar energy system consists of 88 single glazed, Sunworks 'Solector' copper base plate collector modules, hot water coils in the hot air ducts, a Domestic Hot Water (DHW) preheat tank, a 3,000 gallon concrete urethane insulated storage tank and other miscellaneous components. Extracts from the site files, specifications, drawings, installation, operation and maintenance instructions are included.

  12. Hospitalized children drawing their pain: the contents and cognitive and emotional characteristics of pain drawings.

    Science.gov (United States)

    Kortesluoma, Riitta-Liisa; Punamäki, Raija-Leena; Nikkonen, Merja

    2008-12-01

    Describing pain is difficult. Children like to draw, and through their drawing they reveal worrying issues. This study aimed to examine how hospitalized children express pain through drawings, and was carried out by examining children's thematic drawings of pain. A comparison was made between hospitalized children and healthy control groups with respect to the thematic contents and cognitive and emotional characteristics of pain drawings. The drawings were sorted in categories on the basis of content, and cognitive competence and emotional disturbances by the Draw-a-Person procedure. The hospitalized children showed a lower level of cognitive capacity than their healthy controls. The control group children revealed a higher level of emotional disturbance than the hospitalized children. The groups differed in the contents of their drawings. The drawings of the hospitalized children frequently depicted medical procedures, whereas the drawings of the healthy controls depicted more consoling human and family relations.

  13. Nuclear reactor installation

    International Nuclear Information System (INIS)

    Jungmann, A.

    1976-01-01

    A nuclear reactor metal pressure vessel is surrounded by a concrete wall forming an annular space around the vessel. Thermal insulation is in this space and surrounds the vessel, and a coolant-conductive layer is also in this space surrounding the thermal insulation, coolant forced through this layer reducing the thermal stress on the concrete wall. The coolant-conductive layer is formed by concrete blocks laid together and having coolant passages, these blocks being small enough individually to permit them to be cast from concrete at the reactor installation, the thermal insulation being formed by much larger sheet-metal clad concrete segments. Mortar is injected between the interfaces of the coolant-conductive layer and concrete wall and the interfaces between the fluid-conductive layer and the insulation, a layer of slippery sheet material being interposed between the insulation and the mortar. When the pressure vessel is thermally expanded by reactor operation, the annular space between it and the concrete wall is completely filled by these components so that zero-excursion rupture safeguard is provided for the vessel. 4 claims, 1 figure

  14. ROS Installation and Commissioning

    CERN Multimedia

    Gorini, B

    The ATLAS Readout group (a sub-group of TDAQ) has now completed the installation and commissioning of all of the Readout System (ROS) units. Event data from ATLAS is initially handled by detector specific hardware and software, but following a Level 1 Accept the data passes from the detector specific Readout Drivers (RODs) to the ROS, the first stage of the central ATLAS DAQ. Within the final ATLAS TDAQ system the ROS stores the data and on request makes it available to the Level 2 Trigger (L2) processors and to the Event Builder (EB) as required. The ROS is implemented as a large number of PCs housing custom built cards (ROBINs) and running custom multi-threaded software. Each ROBIN card (shown below) contains buffer memories to store the data, plus a field programmable gate array ( FPGA ) and an embedded PowerPC processor for management of the memories and data requests, and is implemented as a 64-bit 66 MHz PCI card. Both the software and the ROBIN cards have been designed and developed by the Readout g...

  15. New fast reactor installation concept

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    The large size and complexity of fast reactor installations are emphasised and these difficulties will be increased with the advent of fast reactors of higher power. In this connection a new concept of fast reactor installation is described with a view to reducing the size of the installation and enabling most components, including even the primary vessel, to be constructed within the confines of a workshop. Full constructional details are given. (U.K.)

  16. Installing Python Modules with pip

    OpenAIRE

    Fred Gibbs

    2013-01-01

    This lesson shows you how to download and install Python modules. There are many ways to install external modules, but for the purposes of this lesson, we’re going to use a program called pip. As of Python 2.7.9 and newer, pip is installed by default. This tutorial will be helpful for anyone using older versions of Python (which are still quite common).

  17. [Reference citation].

    Science.gov (United States)

    Brkić, Silvija

    2013-01-01

    Scientific and professional papers represent the information basis for scientific research and professional work. References important for the paper should be cited within the text, and listed at the end of the paper. This paper deals with different styles of reference citation. Special emphasis was placed on the Vancouver Style for reference citation in biomedical journals established by the International Committee of Medical Journal Editors. It includes original samples for citing various types of articles, both printed and electronic, as well as recommendations related to reference citation in accordance with the methodology and ethics of scientific research and guidelines for preparing manuscripts for publication.

  18. Drawing melodies: evaluation of chironomic singing synthesis.

    Science.gov (United States)

    d'Alessandro, Christophe; Feugère, Lionel; Le Beux, Sylvain; Perrotin, Olivier; Rilliard, Albert

    2014-06-01

    Cantor Digitalis, a real-time formant synthesizer controlled by a graphic tablet and a stylus, is used for assessment of melodic precision and accuracy in singing synthesis. Melodic accuracy and precision are measured in three experiments for groups of 20 and 28 subjects. The task of the subjects is to sing musical intervals and short melodies, at various tempi, using chironomy (hand-controlled singing), mute chironomy (without audio feedback), and their own voices. The results show the high accuracy and precision obtained by all the subjects for chironomic control of singing synthesis. Some subjects performed significantly better in chironomic singing compared to natural singing, although other subjects showed comparable proficiency. For the chironomic condition, mean note accuracy is less than 12 cents and mean interval accuracy is less than 25 cents for all the subjects. Comparing chironomy and mute chironomy shows that the skills used for writing and drawing are used for chironomic singing, but that the audio feedback helps in interval accuracy. Analysis of blind chironomy (without visual reference) indicates that a visual feedback helps greatly in both note and interval accuracy and precision. This study demonstrates the capabilities of chironomy as a precise and accurate mean for controlling singing synthesis.

  19. Installation and validation of MCNP-4A

    International Nuclear Information System (INIS)

    Marks, N.A.

    1997-01-01

    MCNP-4A is a multi-purpose Monte Carlo program suitable for the modelling of neutron, photon, and electron transport problems. It is a particularly useful technique when studying systems containing irregular shapes. MCNP has been developed over the last 25 years by Los Alamos, and is distributed internationally via RSIC at Oak Ridge. This document describes the installation of MCNP-4A (henceforth referred to as MCNP) on the Silicon Graphics workstation (bluey.ansto.gov.au). A limited number of benchmarks pertaining to fast and thermal systems were performed to check the installation and validate the code. The results are compared to deterministic calculations performed using the AUS neutronics code system developed at ANSTO. (author)

  20. Installing Ubuntu Enterprise Cloud in a Physical Environment

    DEFF Research Database (Denmark)

    Pantić, Zoran; Ali Babar, Muhammad

    This document contains the supplemental material to “Guidelines for Building a Private Cloud Infrastructure.” This supplemental material provides guidance on how to install Ubuntu Enterprise Cloud in a physical environment. The purpose of this document is to provide a practical, step......-by-step, detailed guide on how to pre-configure and install the machines and network. For more detailed description of the steps, a reader is advised to refer to another supplemental book named “Installing and Scaling out Ubuntu Enterprise Cloud in Virtual Environment.” There are a few more details, accompanied...... with screenshots. The material included in this supplemental document is based on the installation that was performed in a physical environment based on HP ProLiant DL380 G4 servers, 100 Mbit/s witches, and a firewall/router that isolated the whole solution. The cloud installation was performed using the (for...

  1. Reference Assessment

    Science.gov (United States)

    Bivens-Tatum, Wayne

    2006-01-01

    This article presents interesting articles that explore several different areas of reference assessment, including practical case studies and theoretical articles that address a range of issues such as librarian behavior, patron satisfaction, virtual reference, or evaluation design. They include: (1) "Evaluating the Quality of a Chat Service"…

  2. Mixed Movements/performance-based drawing

    DEFF Research Database (Denmark)

    Brabrand, Helle

    2010-01-01

    Mixed Movements is a research project engaged in performance-based architectural drawing. The project experiments with drawing-series as montages of materials and forces, making the drawing appear in its changing character. The moving components are conditioned by different circumstances...... that question each other, working as well with space-time motives as with expressions and techniques. A series poses questions both to the kind of forces it raises as well as to the kind of sensual affects it produces – to how the body resonates with the rhythms and tensions that appear in the drawing....... A drawing-series is then both a machine, a diagram, and an appearance, what we call a resonance-model, creating links between tectonic and drawing constructions, kinaesthetic competences and actual body-movements....

  3. Drawing Contour Trees in the Plane.

    Science.gov (United States)

    Heine, C; Schneider, D; Carr, Hamish; Scheuermann, G

    2011-11-01

    The contour tree compactly describes scalar field topology. From the viewpoint of graph drawing, it is a tree with attributes at vertices and optionally on edges. Standard tree drawing algorithms emphasize structural properties of the tree and neglect the attributes. Applying known techniques to convey this information proves hard and sometimes even impossible. We present several adaptions of popular graph drawing approaches to the problem of contour tree drawing and evaluate them. We identify five esthetic criteria for drawing contour trees and present a novel algorithm for drawing contour trees in the plane that satisfies four of these criteria. Our implementation is fast and effective for contour tree sizes usually used in interactive systems (around 100 branches) and also produces readable pictures for larger trees, as is shown for an 800 branch example.

  4. Emotion in Painting and Art Installations.

    Science.gov (United States)

    Konečni, Vladimir J

    2015-01-01

    Paintings are static 2-dimensional images with limited narrative means. On the basis of a critical analysis of the relevant laboratory scaling studies, museum studies, and neuroaesthetic work, the article reaches a negative conclusion about most paintings' ability to engage sufficiently with general viewers' associative-memory systems, so as to lead to identification and empathy, and induce fundamental psychobiological emotions. In contrast, designers of art installations can draw on subtle combinations of several classes of stimulus properties with psychological significance subsumable under the classical concept of the sublime (physical grandeur, rarity, an association with beauty and with biologically significant outcomes), so that some installations may induce the peak aesthetic emotional response, aesthetic awe--as defined in Aesthetic Trinity Theory (Konečni, 2005, 2011), along with the states of being moved and physiological thrills. The approach also involves an analytical skepticism about emotivism, defined as a culturological proclivity for unnecessary insertion of emotion into accounts of mental life and behavior, especially in the arts. Implications for the role of emotion theory in empirical aesthetics are examined.

  5. The dismantling of CEA nuclear installations

    International Nuclear Information System (INIS)

    Piketty, Laurence

    2016-03-01

    After having indicated locations of French nuclear installations which are currently being dismantled (about 30 installations), and recalled the different categories of radioactive wastes with respect to their activity level and the associated storage options, this article gives an overview of various aspects of dismantling, more precisely in the case of installations owned and managed by the CEA. These operations comprise the dismantling itself, the recovery and packaging of wastes, old effluents and spent fuels. The organisation and responsible departments within the CEA are presented, and the author outlines some operational problematic issues met due to the age of installations (traceability of activities, regulation evolutions). The issue of financing is then discussed, and its uncertainties are outlined. The dismantling strategy within the CEA-DEN is described, with reference to legal and regulatory frameworks. The next parts of the article address the organisation and the economic impact of these decontamination and dismantling activities within the CEA-DEN, highlight how R and D and advanced technology are a support to this activities as R and D actions address all scientific and technical fields of nuclear decontamination and dismantling. An overview of three important dismantling works is proposed: Fontenay-aux-Roses, the Marcoule CEA centre (a reference centre in the field of nuclear dismantling and decontamination) and the Grenoble CEA centre (reconversion in R and D activities in the fields of technologies of information, of communication, technologies, for health, and in renewable energies). The last part addresses the participation to the Strategic Committee of the Nuclear Sector (CSFN)

  6. ONKALO - Main drawings in 2007

    International Nuclear Information System (INIS)

    2008-05-01

    The first overall site characterisation programme for a Finnish repository of spent nuclear fuel was introduced in 1982. This programme already suggested that the site confirmation for a detailed repository design and safety assessment should include characterisation performed in an underground rock characterisation facility (URCF). This idea was confirmed during the detailed site characterisation. International views have also emphasised the importance of underground characterisation before the final decision to construct the repository is taken. The underground rock characterisation facility (ONKALO) is excavated at Olkiluoto in the municipality of Eurajoki. ONKALO should be constructed to allow characterisation work for site confirmation without jeopardising long-term safety of the repository site. It should also be possible to link ONKALO later to the repository as to a part of it. The construction of ONKALO was started in 2004 and will be completed in 2014. The characterisation work has started in ONKALO and will focus on the disposal depth. In the main drawings stage, ONKALO was described at the level of detail needed for a construction permit in 2003. This meant description of the location, final structures and final systems. This summary report describes the development of design to updated main drawings in 2007 at the same level of detail (no temporary arrangements are described). The main changes are the added exhaust air shaft and advancing the controlled area's inlet air shaft to the ONKALO phase. Also the layout and the depth of the characterisation levels have been updated according to the current bedrock information. Some buildings on the surface will house sets of equipment directly connected with underground facility and this equipment is described in this report. No buildings or other equipment are described in this report, because they are not directly connected with the underground facility. The main element of ONKALO is a system of

  7. Cutting costs without drawing blood.

    Science.gov (United States)

    Copeland, T

    2000-01-01

    When looking for ways to cut costs, most managers reach for the head-count hatchet, and the markets usually roar with approval. But a company can almost always create far more sustainable value by rigorously evaluating the small-ticket capital items that often get rubber-stamped. Drawing on his experience as a consultant and providing numerous anecdotes, the author contends that those "little" requests often prove to be gold plated or unnecessary. A disciplined evaluation involves asking only eight questions and conducting postmortems--regular audits of units' capital spending. But the payoff is enormous. Because cutting the capital budget increases cash flow, the author argues that a permanent cut of just 15% in the planned level of capital spending could boost some companies' market capitalization by as much as 30%. The first three questions--Is this your investment to make? Does it really have to be new? How are our competitors meeting compliance needs?--are asked of operating managers as they assemble capital project requests. The next three are asked by senior managers of themselves and their colleagues as they examine proposals: Is the left hand duplicating investments made by the right? Are trade-offs between profit and capital spending well understood? Are there signs of budget massage? At the end of the review process, senior managers ask: Are we fully using shared assets? How fine-grained are our capacity measures? The author's suggestions for the postmortem include searching for systematic problems with whole classes of expenditures and making sure audit teams come up with specific recommendations for change.

  8. EVOLUTION IN TECHNICAL DRAWING FOR MECHANICAL PRODUCTS

    OpenAIRE

    GHERGHINA George; TUTUNEA Dragos; POPA Dragos

    2017-01-01

    Hand drawing and representation of various images engraved in stones or physical models built to scale come from the beginning of the human kind. The history of civilization presents many forms of representations based on the human imaginations. Nowadays the engineers create a technique to draw and design ideas by rules in ISO standards. If at the beginning of the last century the creation of industrial technical drawings was realized by crayon with very original results, in present, the comp...

  9. Post-Fukushima additional safety assessments: behaviour of French nuclear installations in case of extreme situations and relevance of propositions of improvement. Summary of the IRSN report Nr 679 which has been used as a reference for the permanent Group of experts for reactors and plants held on the 8, 9 and 10 November

    International Nuclear Information System (INIS)

    2011-01-01

    This document summarizes the content of a report made by the IRSN and analysing the additional safety assessments performed and transmitted by operators in September 2011. It evokes the international context after the Fukushima-accident, addresses the analysis approach followed by the IRSN, discusses and comments the installation conditions, the robustness of installations with respect to high level risks and to those retained for their sizing, the behaviour of installations in the case of a total loss of cooling sources or of a long duration loss of energy supplies affecting several installations within a same site (case of EDF reactors, of the high flux reactor of the Laue Langevin Institute, CEA installations, Areva laboratories and plants), the capacity of operators to handle a crisis situation in such conditions, appeal to subcontracting

  10. A national collection on the drawing board

    DEFF Research Database (Denmark)

    Svenningsen, Jesper

    2017-01-01

    Even before there was talk of a central collection of drawings and fine-art prints – what would eventually become the Royal Collection of Graphic Art in 1835 (Den kgl. Kobberstiksamling, formerly known as The Royal Collection of Prints and Drawings) – Danish drawings were already being collected...... on a grand scale. During the period 1810 to 1832, the Royal Danish Academy of Fine Arts built a large collection of recent Danish drawings, and the director of the Royal Picture Gallery, J.C. Spengler, personally collected sheets by older artists. This article delves into the history of these two...

  11. Expressive drawing ability in children with autism.

    Science.gov (United States)

    Jolley, Richard P; O'Kelly, Rachael; Barlow, Claire M; Jarrold, Christopher

    2013-03-01

    The autistic impairments in emotional and social competence, imagination and generating ideas predict qualitative differences in expressive drawings by children with autism beyond that accounted by any general learning difficulties. In a sample of 60 5-19-year-olds, happy and sad drawings were requested from 15 participants with non-savant autism and compared with those drawn by three control groups matched on either degree of learning difficulty (MLD), mental age (MA) or chronological age (CA). All drawings were rated by two artists on a 7-point quality of expression scale. Contrary to our predictions, the drawings from the autistic group were rated similar to those of the MA and MLD groups. Analysis of the people and social content of the drawings revealed that although children with autism did not draw fewer people, they did draw more immature forms than mental age controls. Furthermore, there was tentative evidence that fewer social scenes were produced by the autism sample. We conclude that the overall merit of expressive drawing in autism is commensurate with their general learning difficulties, but the social/emotional impairment in autism affects their drawings of people and social scenes. © 2013 The British Psychological Society.

  12. The insurance of nuclear installations

    International Nuclear Information System (INIS)

    Francis, H.W.

    1977-01-01

    A brief account is given of the development of nuclear insurance. The subject is dealt with under the following headings: the need for nuclear insurance, nuclear insurance pools, international co-operation, nuclear installations which may be insured, international conventions relating to the liability of operators of nuclear installations, classes of nuclear insurance, nuclear reactor hazards and their assessment, future developments. (U.K.)

  13. Solar heating, cooling, and domestic hot water system installed at Kaw Valley State Bank and Trust Company, Topeka, Kansas

    Science.gov (United States)

    1980-01-01

    The building has approximately 5600 square feet of conditioned space. Solar energy was used for space heating, space cooling, and preheating domestic hot water (DHW). The solar energy system had an array of evacuated tube-type collectors with an area of 1068 square feet. A 50/50 solution of ethylene glycol and water was the transfer medium that delivered solar energy to a tube-in-shell heat exchanger that in turn delivered solar heated water to a 1100 gallon pressurized hot water storage tank. When solar energy was insufficient to satisfy the space heating and/or cooling demand, a natural gas-fired boiler provided auxiliary energy to the fan coil loops and/or the absorption chillers. Extracts from the site files, specification references, drawings, and installation, operation and maintenance instructions are presented.

  14. The Act and Artifact of Drawing(s): Observing Geometric Thinking with, in, and through Children's Drawings

    Science.gov (United States)

    Thom, Jennifer S.; McGarvey, Lynn M.

    2015-01-01

    In mathematics education, as in other domains, drawing serves as means to access, assess, and attend to children's understanding. While theoretical accounts of drawings are often based on developmental stage theories, we examine insights gained by considering children's geometric thinking and reasoning from embodied cognitive perspectives. We ask,…

  15. Recent references

    International Nuclear Information System (INIS)

    Ramavataram, S.

    1991-01-01

    In support of a continuing program of systematic evaluation of nuclear structure data, the National Nuclear Data Center maintains a complete computer file of references to the nuclear physics literature. Each reference is tagged by a keyword string, which indicates the kinds of data contained in the article. This master file of Nuclear Structure References (NSR) contains complete keyword indexes to literature published since 1969, with partial indexing of older references. Any reader who finds errors in the keyword descriptions is urged to report them to the National Nuclear Data Center so that the master NSR file can be corrected. In 1966, the first collection of Recent References was published as a separate issue of Nuclear Data Sheets. Every four months since 1970, a similar indexed bibliography to new nuclear experiments has been prepared from additions to the NSR file and published. Beginning in 1978, Recent References was cumulated annually, with the third issue completely superseding the two issues previously published during a given year. Due to publication policy changes, cumulation of Recent Reference was discontinued in 1986. The volume and issue number of all the cumulative issues published to date are given. NNDC will continue to respond to individual requests for special bibliographies on nuclear physics topics, in addition to those easily obtained from Recent References. If the required information is available from the keyword string, a reference list can be prepared automatically from the computer files. This service can be provided on request, in exchange for the timely communication of new nuclear physics results (e.g., preprints). A current copy of the NSR file may also be obtained in a standard format on magnetic tape from NNDC. Requests for special searches of the NSR file may also be directed to the National Nuclear Data Center

  16. fMRI-activation during drawing a naturalistic or sketchy portrait.

    Science.gov (United States)

    Schaer, K; Jahn, G; Lotze, M

    2012-07-15

    Neural processes for naturalistic drawing might be discerned into object recognition and analysis, attention processes guiding eye hand interaction, encoding of visual features in an allocentric reference frame, a transfer into the motor command and precise motor guidance with tight sensorimotor feedback. Cerebral representations in a real life paradigm during naturalistic drawing have sparsely been investigated. Using a functional Magnetic Resonance Imaging (fMRI) paradigm we measured 20 naive subjects during drawing a portrait from a frontal face presented as a photograph. Participants were asked to draw the portrait in either a naturalistic or a sketchy characteristic way. Tracing the contours of the face with a pencil or passive viewing of the face served as control conditions. Compared to passive viewing, naturalistic and sketchy drawing recruited predominantly the dorsal visual pathway, somatosensory and motor areas and bilateral BA 44. The right occipital lobe, middle temporal (MT) and the fusiform face area were increasingly active during drawing compared to passive viewing as well. Compared to tracing with a pencil, both drawing tasks increasingly involved the bilateral precuneus together with the cuneus and right inferior temporal lobe. Overall, our study identified cerebral areas characteristic for previously proposed aspects of drawing: face perception and analysis (fusiform gyrus and higher visual areas), encoding and retrieval of locations in an allocentric reference frame (precuneus), and continuous feedback processes during motor output (parietal sulcus, cerebellar hemisphere). Copyright © 2012 Elsevier B.V. All rights reserved.

  17. Children's Gendered Drawings of Play Behaviours

    Science.gov (United States)

    Akseer, Tabasum; Lao, Mary Grace; Bosacki, Sandra

    2012-01-01

    According to child psychologists, vital links exist between children's drawings and their emotional, social, and cognitive development. Previous research has explored the important relations between drawings and play in educational settings. Given the vast research that explores the ambiguous topic of children's play, according to Richer (1990),…

  18. Mechanical Drawing: Grades 7-12.

    Science.gov (United States)

    Instructional Objectives Exchange, Los Angeles, CA.

    Eighty-five behavioral objectives and related evaluation items for mechanical drawing in grades 7 through 12 are presented. Each sample contains the objective, test items, and means for judging the adequacy of the response. The following categories are included: (1) basic drafting skills; (2) beginning lettering; (3) drawing; (4) orthographic…

  19. Sources of Variability in Children's Drawings

    Science.gov (United States)

    Simon, Lia; Stokes, Patricia D.

    2015-01-01

    An experiment involving 90 students in the 1st, 3rd, and 5th grades investigated how visual examples and grade (our surrogate for age) affected variability in a drawing task. The task involved using circles as the main element in a set of drawings. There were two examples: One was simple and single (a smiley face inside a circle); the other,…

  20. Representations of Loneliness in Children's Drawings

    Science.gov (United States)

    Misailidi, Plousia; Bonoti, Fotini; Savva, Georgia

    2012-01-01

    This article reports the results of a study which aimed to examine the development of children's ability to depict loneliness in their drawings. Seventy-eight children and 20 adults took part in the study. Participants were first asked a series of questions assessing their conceptions of loneliness, and were then invited to draw a picture that…

  1. Expressive Drawing Ability in Children with Autism

    Science.gov (United States)

    Jolley, Richard P.; O'Kelly, Rachael; Barlow, Claire M.; Jarrold, Christopher

    2013-01-01

    The autistic impairments in emotional and social competence, imagination and generating ideas predict qualitative differences in expressive drawings by children with autism beyond that accounted by any general learning difficulties. In a sample of 60 5-19-year-olds, happy and sad drawings were requested from 15 participants with non-savant autism…

  2. Equivalent drawbead performance in deep drawing simulations

    NARCIS (Netherlands)

    Meinders, Vincent T.; Geijselaers, Hubertus J.M.; Huetink, Han

    1999-01-01

    Drawbeads are applied in the deep drawing process to improve the control of the material flow during the forming operation. In simulations of the deep drawing process these drawbeads can be replaced by an equivalent drawbead model. In this paper the usage of an equivalent drawbead model in the

  3. Pestalozzi and the Origins of Pedagogical Drawing.

    Science.gov (United States)

    Ashwin, Clive

    1981-01-01

    The author credits Pestalozzi with influencing most nineteenth century Continental theorists on the teaching of drawing through his theories, published circa 1800, on drawing as an essential and integral part of each child's education. He analyzes Pestalozzi's approach in the context of his life, times, and general theory of education. (Author/SJL)

  4. Mixed movements/performance-based drawing

    DEFF Research Database (Denmark)

    Brabrand, Helle

    2011-01-01

    Mixed Movements is a research project engaged in performance-based architectural drawing. As one in a series working with architectonic implementation in relation to body and movements, the actual project relates body-movement and dynamic drawing and presents the material as interactive ‘space-time-tables’....

  5. The Wall Drawings of Egyptian Children.

    Science.gov (United States)

    Wilson, Brent

    1982-01-01

    Discusses murals done by Egyptian children. Differences in the drawing styles of American and Egyptian children are discussed. The author states that the significance of the wall drawings is that they represent a rich social setting in which children learn to produce art. (AM)

  6. Development of Hydro-Mechanical Deep Drawing

    DEFF Research Database (Denmark)

    Zhang, Shi-Hong; Danckert, Joachim

    1998-01-01

    The hydro-mechanical deep-drawing process is reviewed in this article. The process principles and features are introduced and the developments of the hydro-mechanical deep-drawing process in process performances, in theory and in numerical simulation are described. The applications are summarized....... Some other related hydraulic forming processes are also dealt with as a comparison....

  7. Children's Sensitivity to Expression in Drawings.

    Science.gov (United States)

    Winston, Andrew S.; And Others

    1995-01-01

    Presents three studies of children's ability to create and detect expressions of emotion in drawings. Compared to younger children, older children used more strategies, experimented with line and color, and were more likely to explore themes of death, aging, and illness. Includes sample drawings and statistical tables. (MJP)

  8. Human Figure Drawings: Abusing the Abused.

    Science.gov (United States)

    Bardos, Achilles N.

    1993-01-01

    Responds to previous article (Motta, Little, and Tobin, this issue) which reviewed data-based studies on figure drawings and found little support for their validity or use in assessing personality, behavior, emotion, or intellectual functioning. Notes recent approaches to interpretation of human figure drawings and cites flaws in argument against…

  9. Moving vertices to make drawings plane

    NARCIS (Netherlands)

    Goaoc, X.; Kratochvil, J.; Okamoto, Y.; Shin, C.S.; Wolff, A.; Hong, S.K.; Nishizeki, T.; Quan, W.

    2008-01-01

    In John Tantalo’s on-line game Planarity the player is given a non-plane straight-line drawing of a planar graph. The aim is to make the drawing plane as quickly as possible by moving vertices. In this paper we investigate the related problem MinMovedVertices which asks for the minimum number of

  10. Online Working Drawing Review and Assessment

    Science.gov (United States)

    McInnis, Jennifer; Sobin, Alexandra; Bertozzi, Nicholas; Planchard, Marie

    2010-01-01

    This paper describes the development and implementation of an online working drawing review video and online assessment tool. Particular attention was paid to dimensioning and ASME ANSI Y14 standards with the goal of improving the quality of the working drawings required in final design project reports. All members of freshmen design teams in the…

  11. Successful pipeline installation for Parque das Conchas development; Subsea installation

    Energy Technology Data Exchange (ETDEWEB)

    Bartz, Cesar

    2010-07-01

    Subsea 7 has successfully delivered again in Brazilian deep-waters. The subsea engineering and construction company has recently completed pipeline installation activities for the Parque das Conchas (BC-10) development, offshore Brazil. (AG)

  12. Cognitive flexibility in drawings of bilingual children.

    Science.gov (United States)

    Adi-Japha, Esther; Berberich-Artzi, Jennie; Libnawi, Afaf

    2010-01-01

    A. Karmiloff-Smith's (1990) task of drawing a nonexistent object is considered to be a measure of cognitive flexibility. The notion of earlier emergence of cognitive flexibility in bilingual children motivated the current researchers to request 4- and 5-year-old English-Hebrew and Arabic-Hebrew bilingual children and their monolingual peers to draw a flower and a house that do not exist (N=80). Bilinguals exhibited a significantly higher rate of interrepresentational flexibility in their drawings (e.g., "a giraffe flower,"a chair-house," found in 28 of 54 drawings), whereas the level of complex intrarepresentational change was similar across groups. Interrepresentational drawings were previously reported only for children older than 7 years. The specific mechanisms by which bilinguals' language experience may lead to interrepresentational flexibility are discussed. © 2010 The Authors. Child Development © 2010 Society for Research in Child Development, Inc.

  13. Drawings between Sensory Appeal and Cultural Code

    DEFF Research Database (Denmark)

    Nielsen, Anne Maj

    to the drawing child in ways that affect the drawing. This is important to take into consideration in research. Sensory appeal and cultural codes in analysis and practice Children’s perception and visual experiences contribute to the construction and transformation of meanings and narratives as they are mediated...... to the drawing child in ways that affect the drawing and the mediation of meaning. This should be taken into consideration in research. The aim of this paper is to qualify analysis of drawings as data in empirical research and to reflect upon opportunities for aesthetic learning processes in psycho....... & Nielsen, A.M. (Eds.) Æstetiske læreprocesser – i teori og praksis. (pp. 192 – 220). København: Billesoe & Baltzer. Fink-Jensen, K. (2007). Attunement and Bodily Dialogues in Music Education. Philosophy of Music Education Review, 15, no 1, 53 - 68. Keller, C. & Keller, J.D. (1993). Thinking and acting...

  14. BUILDOUT AND UPGRADE OF CENTRAL EMERGENCY GENERATOR SYSTEM, GENERATOR 3 AND 4 ELECTRICAL INSTALLATION

    Energy Technology Data Exchange (ETDEWEB)

    Gary D. Seifert; G. Shawn West; Kurt S. Myers; Jim Moncur

    2006-07-01

    SECTION 01000—SUMMARY OF WORK PART 1—GENERAL 1.1 SUMMARY The work to be performed under this project consists of providing the labor, equipment, and materials to perform "Buildout and Upgrade of Central Emergency Generator System, Generator 3 and 4 Electrical Installation" for the National Aeronautics and Space Administration at the Dryden Flight Research Center (NASA/DFRC), Edwards, California 93523. All modifications to existing substations and electrical distribution systems are the responsibility of the contractor. It is the contractor’s responsibility to supply a complete and functionally operational system. The work shall be performed in accordance with these specifications and the related drawings. The work of this project is defined by the plans and specifications contained and referenced herein. This work specifically includes but is not limited to the following: Scope of Work - Installation 1. Install all electrical wiring and controls for new generators 3 and 4 to match existing electrical installation for generators 1 and 2 and in accordance with drawings. Contractor shall provide as-built details for electrical installation. 2. Install battery charger systems for new generators 3 and 4 to match existing battery charging equipment and installation for generators 1 and 2. This may require exchange of some battery charger parts already on-hand. Supply power to new battery chargers from panel and breakers as shown on drawings. Utilize existing conduits already routed to generators 3 and 4 to field route the new wiring in the most reasonable way possible. 3. Install electrical wiring for fuel/lube systems for new generators 3 and 4 to match existing installation for generators 1 and 2. Supply power to lube oil heaters and fuel system (day tanks) from panel and breakers as shown on drawings. Utilize existing conduits already routed to generators 3 and 4 to field route the new wiring in the most reasonable way possible. Add any conduits necessary to

  15. An investigation of school violence through Turkish children's drawings.

    Science.gov (United States)

    Yurtal, Filiz; Artut, Kazim

    2010-01-01

    This study investigates Turkish children's perception of violence in school as represented through drawings and narratives. In all, 66 students (12 to 13 years old) from the middle socioeconomic class participated. To elicit children's perception of violence, they were asked to draw a picture of a violent incident they had heard, experienced, or witnessed. Children mostly drew pictures of violent events among children (33 pictures). Also, there were pictures of violent incidents perpetrated by teachers and directors against children. It was observed that violence influenced children. Violence was mostly depicted in school gardens (38 pictures), but there were violent incidents everywhere, such as in classrooms, corridors, and school stores as well. Moreover, it was found that brute force was the most referred way of violence in the children's depictions (38 pictures). In conclusion, children clearly indicated that there was violence in schools and they were affected by it.

  16. The Effects of Different Drawing Materials on Children's Drawings of Positive and Negative Human Figures

    Science.gov (United States)

    Burkitt, Esther; Barrett, Martyn

    2011-01-01

    Children tend to use certain drawing strategies differentially when asked to draw topics with positive and negative emotional characterisations. These effects have however only been established when children are asked to use standard drawing materials. The present study was designed to investigate whether the above pattern of children's response…

  17. Drawing out Critical Thinking: Testing the Methodological Value of Drawing Collaboratively

    Science.gov (United States)

    Knight, Linda; Zollo, Lyn; McArdle, Felicity; Cumming, Tamara; Bone, Jane; Ridgway, Avis; Peterken, Corinna; Li, Liang

    2016-01-01

    Early childhood research has long established that drawing is a central, and important activity for young children. Less common are investigations into the drawing activity of adults involved in early childhood. A team of adult early childhood researchers, with differing exposures and familiarities with drawing, experimented with intergenerational…

  18. Drawing and conceiving space : how to express spatial experience through drawing?

    NARCIS (Netherlands)

    Schaeverbeke, R.; Aarts, H.M.T.; Heylighen, A.

    2015-01-01

    Teaching drawing in architectural education raises questions regarding the representation of spatial experiences: to what extent can sensory experiences of space be intensified through observing and drawing and, perhaps equally important, what those drawings would look like? In the context of their

  19. Solar Installation Labor Market Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Friedman, B.; Jordan, P.; Carrese, J.

    2011-12-01

    The potential economic benefits of the growing renewable energy sector have led to increased federal, state, and local investments in solar industries, including federal grants for expanded workforce training for U.S. solar installers. However, there remain gaps in the data required to understand the size and composition of the workforce needed to meet the demand for solar power. Through primary research on the U.S. solar installation employer base, this report seeks to address that gap, improving policymakers and other solar stakeholders understanding of both the evolving needs of these employers and the economic opportunity associated with solar market development. Included are labor market data covering current U.S. employment, expected industry growth, and employer skill preferences for solar installation-related occupations. This study offers an in-depth look at the solar installation sectors. A study published by the Solar Foundation in October 2011 provides a census of labor data across the entire solar value chain.

  20. Installation of the Gbar LINAC

    CERN Multimedia

    Maximilien, Brice

    2017-01-01

    Installation of the GBAR linac in its shielding bunker. The electrons accelerated to 10 MeV toward a target will produce the positrons that are necessary to form anti hydrogen with the antiprotons coming from the ELENA decelerator.

  1. DAQ INSTALLATION IN USC COMPLETED

    CERN Multimedia

    A. Racz

    After one year of work at P5 in the underground control rooms (USC55-S1&S2), the DAQ installation in USC55 is completed. The first half of 2006 was dedicated to the DAQ infrastructures installation (private cable trays, rack equipment for a very dense cabling, connection to services i.e. water, power, network). The second half has been spent to install the custom made electronics (FRLs and FMMs) and place all the inter-rack cables/fibers connecting all sub-systems to central DAQ (more details are given in the internal pages). The installation has been carried out by DAQ group members, coming from the hardware and software side as well. The pictures show the very nice team spirit !

  2. Nuclear installations and their environment

    International Nuclear Information System (INIS)

    Rieu, Ch.; Berge-Thierry, C.; Duval, C.; Bonnet, Ch.; Gaubert, B.; Riffard, Th.; Greffier, G.; Cervantes, J.C.; Le Breton, F.; Clement, C.; Charbonnier, R.; Andreani, A.M.; Maubert, H.; Maisonneuve, A.

    2002-01-01

    This dossier deals with protection of nuclear installations against external risks. The articles come from the presentations of the Conference on 'Nuclear installations and their environment', held by the 'Safety and Environment Protection' Section of the French Nuclear Energy Society on October 15, 2002. Floods, earthquakes, winter cold, snow-falls, wind, fires are the main natural risks taken into account. Risks from industrial environment and communication lines are also considered. (authors)

  3. Suitcase to Audit Solar Installations

    Energy Technology Data Exchange (ETDEWEB)

    Alberdi, J.; Barcala, J.M.; Blas de, J.; Molinero, A.; Navarrete, J.J.; Yuste, C.

    2001-07-01

    The audit suitcase was proposed by BESEL to introduce in the solar energy market a new tool which can make an evaluation of solar installation efficiency. Non-invasive sensors and low power components permit both easy installation of the devices and data storage for a period as long as ten days. This project was funded by the contract JOR3-CT98-7030 of the European Union JOULE III program. (Author)

  4. Suitcase to Audit Solar Installations

    International Nuclear Information System (INIS)

    Alberdi, J.; Barcala, J. M.; Blas, J. de; Molinero, A.; Navarrete, J. J.; Yuste, C.

    2001-01-01

    The audit suitcase was proposed by BESEL to introduce in the solar energy market a new tool which can make an evaluation of solar installation efficiency. Non-invasive sensors and low power components permit both easy installation of the devices and data storage for a period as long as ten days. This project was funded by the contract JOR3-CT98-7030 of the European Union JOULE III program. (Author)

  5. Scientific drawing: an introduction to drawing as a language in fieldwork

    Directory of Open Access Journals (Sweden)

    José Mayor Iborra

    2013-11-01

    Full Text Available The scientific drawing understood as a universal language is a tool of undoubted documentary value as well as daily use in our field work of any professional who is with the need to register with graphics, a work process in which, need to process the drawing as coach and illustrator information. The drawings scientists have always had the vocation of fidelity and accuracy, in order to collect objective truths. The scientific drawing has been compressed and discriminating, as the reading order of the drawing through the line by providing a clear exposition that the photograph is not enough to achieve.

  6. Enhancing Architectural Drawings and Models with Photoshop

    CERN Document Server

    Onstott, Scott

    2010-01-01

    Transform your CAD drawings into powerful presentationThis one-of-a-kind book shows you how to use Photoshop to turn CAD drawings and BIM models into artistic presentations with captivating animations, videos, and dynamic 3D imagery. The techniques apply to all leading architectural design software including AutoCAD, Revit, and 3ds Max Design. Video tutorials on the DVD improve your learning curve and let you compare your work with the author's.Turn CAD drawings and BIM models into powerful presentations featuring animation, videos, and 3D imagery for enhanced client appealCraft interactive pa

  7. Intelligent Shimming for Deep Drawing Processes

    DEFF Research Database (Denmark)

    Tommerup, Søren; Endelt, Benny Ørtoft; Danckert, Joachim

    2011-01-01

    cavities the blank-holder force distribution can be controlled during the punch stroke. By means of a sequence of numerical simulations abrasive wear is imposed to the deep drawing of a rectangular cup. The abrasive wear is modelled by changing the tool surface geometry using an algorithm based...... on the sliding energy density. As the tool surfaces are changed the material draw-in is significantly altered when using conventional open-loop control of the blank-holder force. A feed-back controller is presented which is capable of reducing the draw-in difference to a certain degree. Further a learning...

  8. Layered Graph Drawing for Visualizing Evaluation Structures.

    Science.gov (United States)

    Onoue, Yosuke; Kukimoto, Nobuyuki; Sakamoto, Naohisa; Misue, Kazuo; Koyamada, Koji

    2017-01-01

    An evaluation structure is a hierarchical structure of human cognition extracted from interviews based on the evaluation grid method. An evaluation structure can be defined as a directed acyclic graph (DAG). The authors propose a layer-assignment method that is part of the Sugiyama framework, a popular method for drawing DAGs, to satisfy the requirements for drawing evaluation structures. Their evaluations demonstrate that the layered graph drawing produced by the proposed layer-assignment method is preferred by users and aids in the understanding of evaluation structures.

  9. Linear stories in Carlo Scarpa's architectural drawings

    DEFF Research Database (Denmark)

    Dayer, Carolina

    2017-01-01

    , an architect guides the viewer’s imagination into another not-yet-real world that is projected much like divinatory practices of reading palms or tarot cards. The magic-real field of facts and fictions coexisting in one realm can be understood as a confabulation. A confabulation brings together both fact...... close reading of the drawings has been made despite the thousands of drawings the architect constructed. Scarpa’s drawings, like confabulations, are places where many realities simultaneously coexist but all constitute one reality in a linear process, linear understood not as a straight, nor predictable...

  10. Children's illness drawings and asthma symptom awareness.

    Science.gov (United States)

    Gabriels, R L; Wamboldt, M Z; McCormick, D R; Adams, T L; McTaggart, S R

    2000-01-01

    This study examines the relationship between children's abilities to perceive their symptoms of asthma via several previously researched subjective and objective procedures compared with their performance on a standardized children's drawing task and scale criteria. Results indicated that girls verbalized significantly more emotions about their drawings and were better able to detect airflow changes in their small airways than boys. The Gabriels Asthma Perception Drawing Scales (GAPDS) is a promising clinical tool for assessing children's perceptions and emotions about asthma via nonverbal methods. Varying methods of measuring asthma symptom awareness are not highly correlated; thus, more than one methodology is appropriate for use with children.

  11. The effects of task explicitness to communicate on the expressiveness of children’s drawings of different topics

    OpenAIRE

    Burkitt, Esther

    2016-01-01

    Effects of asking children to communicate through their drawings have been investigated using animate rather than inanimate drawing topics. The present study investigated the impact of a communication context on children’s drawings of topics with contrasting animism. Three hundred and twenty two children, 156 boys and 166 girls aged 6-11 years were allocated to two conditions. The communication condition (n=161) involved instructions to communicate emotion and the reference condition (n=161) ...

  12. Sexual harassment. Where to draw the line.

    Science.gov (United States)

    Davidhizar, R; Erdel, S; Dowd, S

    1998-02-01

    Research reveals a widespread and frequently mismanaged problem--sexual harassment. Federal and state rulings, workplace guidelines and the Equal Opportunity Commission's definition of sexual harassment can help determine where to draw the line.

  13. Peru - privatisation draws in major new investments

    International Nuclear Information System (INIS)

    Cranfield, John.

    1994-01-01

    The recent charges in Peru's energy sector are reported as the privatisation campaign draws to a close. Sectors covered include the splitting of the petroleum company into its components of production, refining, transport and marketing. (UK)

  14. Drawing medicine out of a vial

    Science.gov (United States)

    ... top. Then push gently on the plunger to push the air bubbles back into the vial. If you have a lot of bubbles, push the plunger to push all the medicine back into the vial. Draw medicine out again slowly ...

  15. Semi-automatic drawings surveying system

    International Nuclear Information System (INIS)

    Andriamampianina, Lala

    1983-01-01

    A system for the semi-automatic survey of drawings is presented. Its design has been oriented to the reduction of the stored information required for the drawing reproduction. This equipment consists mainly of a plotter driven by a micro-computer, but the pen of the plotter is replaced by a circular photodiode array. Line drawings are first viewed as a concatenation of vectors, with constant angle between the two vectors, and then divided in arcs of circles and line segments. A dynamic analysis of line intersections with the circular sensor permits to identify starting points and end points in a line, for the purpose of automatically following connected lines in drawing. The advantage of the method described is that precision practically depends only on the plotter performance, the sensor resolution being only considered for the thickness of strokes and the distance between two strokes. (author) [fr

  16. Sizewell 'B' PWR reference design

    International Nuclear Information System (INIS)

    1982-04-01

    The reference design for a PWR power station to be constructed as Sizewell 'B' is presented in 3 volumes containing 14 chapters and in a volume of drawings. The report describes the proposed design and provides the basis upon which the safety case and the Pre-Construction Safety Report have been prepared. The station is based on a 3425MWt Westinghouse PWR providing steam to two turbine generators each of 600 MW. The layout and many of the systems are based on the SNUPPS design for Callaway which has been chosen as the US reference plant for the project. (U.K.)

  17. Slainless steel tube drawing on a mandrel

    International Nuclear Information System (INIS)

    Sokolovskij, V.I.; Parshin, V.S.; Veshkurtsev, V.I.

    1976-01-01

    A new technique for drawing stainless pipes on a mandrel has been developed at the Ural Polytechnical Institute. The method involves metal surfacing with a salt melt and results in stretching equal to 2.0. The use of such metal coats as lubrication sublayers makes possible repeated drawing with and without a mandrel. In both cases, the process does not involve intermediate heat treatment and/or any additional preparation of the surface

  18. Forming Behaviour in Laser Shock Drawing

    OpenAIRE

    Schulze Niehoff, H.; Vollertsen, F.; Wielage, H.

    2008-01-01

    Through the continuing trend of miniaturization new cost efficient and fast methods for processing small parts are required. In this paper a new non-mechanical process for the forming process of micro deep drawing is presented. This new deep drawing process utilizes a laser initiated plasma shock wave at the target, which forms the sheet. Several pulses can be applied at one point and therefore high forming degrees can be reached without increasing the energy density. In this paper the pressu...

  19. Interim Stabilization Equipment Essential and Support Drawing Plan

    International Nuclear Information System (INIS)

    HORNER, T.M.

    2000-01-01

    The purpose of this document is to list the Interim Stabilization equipment drawings that are classified as Essential or Support drawings. Essential Drawings are those drawings identified by the facility staff as necessary to directly support the safe operation of the facility or equipment. [CHG 2000a]. Support Drawings are those drawings identified by the facility staff that further describe the design details of structures, systems or components shown on essential drawings. [CHG 2000a

  20. Interim Stabilization Equipment Essential and Support Drawing Plan

    International Nuclear Information System (INIS)

    KOCH, M.R.

    1999-01-01

    The purpose of this document is to list the Interim Stabilization equipment drawings that are classified as Essential or Support drawings. Essential Drawings: Those drawings identified by the facility staff as necessary to directly support the safe operation of the facility or equipment. Support Drawings: Those drawings identified by the facility staff that further describe the design details of structures, systems or components shown on essential drawings

  1. Displacement pile installation effects in sand

    NARCIS (Netherlands)

    Beijer-Lundberg, A.

    2015-01-01

    Installation effects govern the post-installation behaviour of displacement piles in sand. These effects are currently not completely understood. Suitable experimental techniques to model these installation effects include field, laboratory and experimental models. In the current thesis a

  2. Psychometric Study of the Pain Drawing.

    Science.gov (United States)

    Trahan, Lisa H; Cox-Martin, Emily; Johnson, Carrie E; Dougherty, Patrick M; Yu, Jun; Feng, Lei; Cook, Christina; Novy, Diane M

    2017-12-01

    The objectives of the study were to (1) assess the extent to which interrater reliability of pain drawing location and dispersion scoring methods are similar across pain disciplines in a sample of patients with cancer treatment-induced neuropathic pain ( N = 56) and (2) investigate indicators of validity of the pain drawing in this unique sample. Patients undergoing cancer therapy completed the Brief Pain Inventory Body Map, the MD Anderson Symptom Inventory, and the McGill Pain Questionnaire. Intraclass correlation coefficients among medical and psychology professionals ranged from .93-.99. Correlations between pain drawing score and symptom burden severity ranged from .29-.39; correlations between pain drawing score and symptom burden interference ranged from .28-.34. Patients who endorsed pain in the hands and feet more often described their pain as electric, numb, and shooting than patients without pain in the hands and feet. They also endorsed significantly more descriptors of neuropathic pain. Results suggest a similar understanding among members of a multidisciplinary pain team as to the location and dispersion of pain as represented by patients' pain drawings. In addition, pain drawing scores were related to symptom burden severity and interference and descriptors of neuropathic pain in expected ways.

  3. Cultural Differences and Similarities in Responses to the Silver Drawing Test in the USA, Brazil, Russia, Estonia, Thailand, and Australia.

    Science.gov (United States)

    Silver, Rawley

    2003-01-01

    Summarizes cross-cultural studies of cognitive skills, emotions, and self-images found in responses to drawing tasks by children, adolescents, and adults. Its aim is to find out whether cultural differences in scores on the Silver Drawing Test can illuminate cultural preferences and contribute to cultural practices. (Contains 21 references.) (GCP)

  4. The safety of nuclear installations

    International Nuclear Information System (INIS)

    1993-01-01

    This Safety Fundamental publication sets out basic objectives, concepts and principles for ensuring safety that can be used both by the IAEA in its international assistance operations and by Member States in their national nuclear programmes. These Safety Fundamentals apply primarily to those nuclear installations in which the stored energy developed in certain situations could potentially results in the release of radioactive material from its designated location with the consequent risk of radiation exposure of people. These principles are applicable to a broad range of nuclear installations, but their detailed application will depend on the particular technology and the risks posed by it. In addition to nuclear power plants, such installations may include: research reactors and facilities, fuel enrichment, manufacturing and reprocessing plants; and certain facilities for radioactive waste treatment and storage

  5. Classrooms as Installations: A Conceptual Framework for Analysing Classroom Photographs from the Past

    Science.gov (United States)

    O'Donoghue, Donal

    2010-01-01

    This paper suggests a new way of working with and analysing school photographs in history of education research, especially photographs of school classrooms. It advances a new methodological approach for inquiring into the spatiality and materiality of schooling. This approach is located in the practice of installation art and draws from the…

  6. Solar heating and hot water system installed at Alderson Broaddus College, Philippi, West Virginia

    Science.gov (United States)

    1981-01-01

    Data needed necessary to evaluate the design and operation of a solar energy heating and hot water system installed in a commercial application are presented. The information includes system descriptions, acceptance test data, schematics, as built drawing, problems encountered, all solutions and photographs of the system at various stages of completion.

  7. Industrial installation surveillance acoustic device

    International Nuclear Information System (INIS)

    Marini, Jean; Audenard, Bernard.

    1981-01-01

    The purpose of this invention is the detection of possible impacts of bodies migrating inside the installation, using acoustic sensors of the waves emitted at the time of impact of the migrating bodies. This device makes it possible to take into account only those acoustic signals relating to the impacts of bodies migrating in the area under surveillance, to the exclusion of any other acoustic or electric perturbing phenomenon. The invention has a preferential use in the case of a linear shape installation in which a fluid flows at high rate, such as a section of the primary system of a pressurized water nuclear reactor [fr

  8. Solar heating and hot water system installed at Listerhill, Alabama

    Science.gov (United States)

    1978-01-01

    The Solar system was installed into a new building and was designed to provide 79% of the estimated annual space heating load and 59% of the estimated annual potable hot water requirement. The collectors are flat plate, liquid manufactured by Reynolds Metals Company and cover a total area of 2344 square feet. The storage medium is water inhibited with NALCO 2755 and the container is an underground, unpressurized steel tank with a capacity of 5000 gallons. This report describes in considerable detail the solar heating facility and contains detailed drawings of the completed system.

  9. Key issues for low-cost FGD installations

    Energy Technology Data Exchange (ETDEWEB)

    DePriest, W.; Mazurek, J.M. [Sargent & Lundy LLC, Chicago, IL (United States)

    1995-12-01

    This paper will discuss various methods for installing low-cost FGD systems. The paper will include a discussion of various types of FGD systems available, both wet and dry, and will compare the relative cost of each type. Important design issues, such as use of spare equipment, materials of construction, etc. will be presented. An overview of various low-cost construction techniques (i.e., modularization) will be included. This paper will draw heavily from Sargent & Lundy`s database of past and current FGD projects together with information we gathered for several Electric Power Research Institute (EPRI) studies on the subject.

  10. 48 CFR 1952.227-77 - Rights in shop drawings.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Rights in shop drawings... Rights in shop drawings. As prescribed in 1927.405(h), insert the following clause: Rights in Shop Drawings (FEB 1985) (a) Shop drawings for construction means drawings, submitted to the Government by the...

  11. Automated installation methods for photovoltaic arrays

    Science.gov (United States)

    Briggs, R.; Daniels, A.; Greenaway, R.; Oster, J., Jr.; Racki, D.; Stoeltzing, R.

    1982-11-01

    Since installation expenses constitute a substantial portion of the cost of a large photovoltaic power system, methods for reduction of these costs were investigated. The installation of the photovoltaic arrays includes all areas, starting with site preparation (i.e., trenching, wiring, drainage, foundation installation, lightning protection, grounding and installation of the panel) and concluding with the termination of the bus at the power conditioner building. To identify the optimum combination of standard installation procedures and automated/mechanized techniques, the installation process was investigated including the equipment and hardware available, the photovoltaic array structure systems and interfaces, and the array field and site characteristics. Preliminary designs of hardware for both the standard installation method, the automated/mechanized method, and a mix of standard installation procedures and mechanized procedures were identified to determine which process effectively reduced installation costs. In addition, costs associated with each type of installation method and with the design, development and fabrication of new installation hardware were generated.

  12. Science, technology and inventions: Children draw their own visions

    Science.gov (United States)

    D'Addezio, G.; Rubbia, G.; Marsili, A.

    2013-12-01

    hybridized animals, devices helping in human caring or having impact on the environment, for a better quality of life. In general, preferred subjects refer to something useful with respect to things we do in everyday life but also fancy devices, for which imagination runs wild. Inventions can include something useful to individuals or to a community, being something totally new, or already existing, but improved, combined or transformed; being a device or part of the natural environment or of the human body; they can involve several dimensions of living like eating, transporting, entertainment or work. Do girls and boys conceive different inventions? What do they invent with respect to Earth Sciences and natural environment? Which are the relationships with the outreach programs organized and performed by INGV? What arises from children's drawings provides us a direct and unconventional approach to point out how we convey our science - a strategic topic for a suitable future of the humanity - to the players of the world of tomorrow.

  13. IE Information Notice No. 85-75: Improperly installed instrumentation, inadequate quality control and inadequate postmodification testing

    International Nuclear Information System (INIS)

    Jordan, E.L.

    1992-01-01

    On June 10, 1985, the licensee informed the NRC Resident Inspector that for approximately 5 days LaSalle Unit 2 had been without the capability of automatic actuation of emergency core cooling (ECCS) and that for approximately 3 days during this period the plant had been without secondary containment integrity. The major cause of this condition was improper installation (the variable and reference legs were reversed) of the two reactor vessel level actuation switches which control Division 1 automatic depressurization system (ADS), low pressure core spray (LPCS), and reactor core isolation cooling (RCIC). On July 20, 1985, the Trojan Nuclear Power Plant tripped from 100% power because of a turbine trip that was caused by the loss of the unit auxiliary transformer. All systems functioned normally except that low suction pressure caused one auxiliary feedwater pump to trip and then the other auxiliary feedwater pump to trip after restart of the first auxiliary feedwater pump. The cause of the trips of the auxiliary feedwater pumps can be traced back to improper postmodification adjustment and inadequate postmodification testing following retrofit of environmentally qualified controllers for the auxiliary feedwater system. The auxiliary feedwater pump trips on low suction pressure were caused by excessive combined flow from the two auxiliary feedwater pumps that draw from a single header from the condensate storage tank. The flow control valves were open farther than required after new environmentally qualified controllers had been installed during a recent refueling outage

  14. Drawing as Instrument, Drawings as Evidence: Capturing Mental Processes with Pencil and Paper.

    Science.gov (United States)

    Puglionesi, Alicia

    2016-07-01

    Researchers in the mind sciences often look to the production and analysis of drawings to reveal the mental processes of their subjects. This essay presents three episodes that trace the emergence of drawing as an instrumental practice in the study of the mind. Between 1880 and 1930, drawings gained currency as a form of scientific evidence - as stable, reproducible signals from a hidden interior. I begin with the use of drawings as data in the child study movement, move to the telepathic transmission of drawings in psychical research and conclude with the development of drawing as an experimental and diagnostic tool for studying neurological impairment. Despite significant shifts in the theoretical and disciplinary organisation of the mind sciences in the early twentieth century, researchers attempted to stabilise the use of subject-generated drawings as evidence by controlling the contexts in which drawings were produced and reproduced, and crafting subjects whose interiority could be effectively circumscribed. While movements such as psychoanalysis and art therapy would embrace the narrative interpretation of patient art, neuropsychology continued to utilise drawings as material traces of cognitive functions.

  15. Drawing as Instrument, Drawings as Evidence: Capturing Mental Processes with Pencil and Paper

    Science.gov (United States)

    Puglionesi, Alicia

    2016-01-01

    Researchers in the mind sciences often look to the production and analysis of drawings to reveal the mental processes of their subjects. This essay presents three episodes that trace the emergence of drawing as an instrumental practice in the study of the mind. Between 1880 and 1930, drawings gained currency as a form of scientific evidence – as stable, reproducible signals from a hidden interior. I begin with the use of drawings as data in the child study movement, move to the telepathic transmission of drawings in psychical research and conclude with the development of drawing as an experimental and diagnostic tool for studying neurological impairment. Despite significant shifts in the theoretical and disciplinary organisation of the mind sciences in the early twentieth century, researchers attempted to stabilise the use of subject-generated drawings as evidence by controlling the contexts in which drawings were produced and reproduced, and crafting subjects whose interiority could be effectively circumscribed. While movements such as psychoanalysis and art therapy would embrace the narrative interpretation of patient art, neuropsychology continued to utilise drawings as material traces of cognitive functions. PMID:27292325

  16. The genesis of errors in drawing.

    Science.gov (United States)

    Chamberlain, Rebecca; Wagemans, Johan

    2016-06-01

    The difficulty adults find in drawing objects or scenes from real life is puzzling, assuming that there are few gross individual differences in the phenomenology of visual scenes and in fine motor control in the neurologically healthy population. A review of research concerning the perceptual, motoric and memorial correlates of drawing ability was conducted in order to understand why most adults err when trying to produce faithful representations of objects and scenes. The findings reveal that accurate perception of the subject and of the drawing is at the heart of drawing proficiency, although not to the extent that drawing skill elicits fundamental changes in visual perception. Instead, the decisive role of representational decisions reveals the importance of appropriate segmentation of the visual scene and of the influence of pictorial schemas. This leads to the conclusion that domain-specific, flexible, top-down control of visual attention plays a critical role in development of skill in visual art and may also be a window into creative thinking. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. Drawing Myth and History in visual art

    Directory of Open Access Journals (Sweden)

    Jaime de Córdoba

    2009-07-01

    Full Text Available After the famous exhibition “Copier créer” curated by Jean Pierre Cuzin in the “Musée du Louvre” in 1993, the practice of drawing art has acquired a renovated interest. This exhibition revised the theoretical concepts introduced by Bober and others in the second half of the XXth century and increased the value of the contribution of drawing in the study of art history instead of the idea of copying. An important catalog and essay by Haverkamp, Begemann and Login, titled “Creative copies”, appeared in 1988 and contained the best examples of the main collections. The last but not least important consequence was the collaboration between international museums, using their own spaces, with contemporary artists. The hermeneutic drawings and paintings by Markus Lüpertz in the Munich Glyptotheck and the exhibition of Giacometti’s drawings shown in the IVAM in 2000 are two excellent examples of the European relevance in this field. I want to analyze here twenty years of drawing done in different museums and institutions around the world and its close relationship with the process of recovering our historical memory by using visual art.

  18. Photovoltaic self-consumption: reference activity sheets

    International Nuclear Information System (INIS)

    2016-01-01

    In order to promote the use of photovoltaic energy in self-consumption, Enerplan, the French association of solar energy professionals, has edited a set of reference sheets comprising the main technical and economic data of recent installations (cold generation facility, water treatment plant, farm, commercial and public buildings), in various French regions: description of the installation, project owner testimony, technical characteristics of the site, expected results, economic data, production/consumption results

  19. Horn installed in CNGS tunnel

    CERN Multimedia

    Maximilien Brice

    2005-01-01

    The horn is installed for the CERN Neutrinos to Gran Sasso (CNGS) project. Protons collide with a graphite target producing charged particles that are focussed by the magnetic field in the horn. These particles will then pass into a decay tube where they decay into neutrinos, which travel towards a detector at Gran Sasso 732 km away in Italy.

  20. Installation tests for BERSAFE 88

    International Nuclear Information System (INIS)

    Bamfield, R.D.; Haigh, R.

    1989-02-01

    A set of ten test problems for each of the four BERSAFE stress analysis programs is provided. These problems along with this report, which forms part of the BERSAFE 88 documentation, constitute a test of the customers' BERSAFE installation. On running the problems and attaining results identical to those presented here, the customer should have some confidence that his system is operating correctly. (author)

  1. Solar Water Heater Installation Package

    Science.gov (United States)

    1982-01-01

    A 48-page report describes water-heating system, installation (covering collector orientation, mounting, plumbing and wiring), operating instructions and maintenance procedures. Commercial solar-powered water heater system consists of a solar collector, solar-heated-water tank, electrically heated water tank and controls. Analysis of possible hazards from pressure, electricity, toxicity, flammability, gas, hot water and steam are also included.

  2. YB0 SERVICES INSTALLATION COMPLETED

    CERN Document Server

    The beauty of the completed YB0 was briefly visible at P5 as preparations continue for Tracker installation. A tremendous effort, lasting 7 months and involving more than 100 workers on the busiest days, resulted in 5700 electrical cables, 780 optical cables with 65k fibre channels, and 550 pipes laid on YB0 for HB, EB and Tracker.

  3. Nuclear ventilation installations. Method of control of the scrubbing coefficient of iodine trap

    International Nuclear Information System (INIS)

    1982-12-01

    The present standard aims at defining a method to control the scrubbing coefficient of radioactive iodine trapping systems, used in nuclear ventilation installations. It applies to the installations where the trapping, efficiency of radioactive iodine has to be known, tested and compared to a reference value generally included in the safety reports. It applies to the installations where the absolute pressure of the air in the ventilation systems is above 1,4. 10 5 Pa (1,4 Bar) [fr

  4. Development of a quality management system for Brazilian nuclear installations

    International Nuclear Information System (INIS)

    Kibrit, Eduardo; Zouain, Desiree Moraes

    2005-01-01

    The present work is a proposal for developing a quality management system for Brazilian nuclear installations, based on applicable standards. The standard ISO 9001:2000 [4] establishes general requirements for the implementation of a quality management system in all kinds of organizations. The standard IAEA 50-C/SG-Q [1] establishes general requirements for the implementation of a quality assurance system in nuclear installations. The standard CNEN-NN- 1.16 [5] establishes the regulating requirements for the quality assurance systems and programs of nuclear installations, for licensing and authorization for operation of these installations in Brazil. The revision of standard IAEA 50-C/SG-Q [1], to be replaced by IAEA DS 338 [2] and IAEA DPP 349 [3], introduces the concept of 'Integrated Management System' for the nuclear area, in preference to the concept of 'Quality Assurance'. This approach is incorporated with the current tendency, because it guides the system to manage, in an integrated way, the requirements of quality, safety, health, environment, security and economics of the installation. The results of the characterization of the quality management systems established in the applicable standards are presented, with the determination of the common and conflicting points among them. Referring data to quality assurance program/quality management system in some nuclear installations of IAEA Member States are also presented. (author)

  5. Regulation for installation and operation of reactor

    International Nuclear Information System (INIS)

    1977-01-01

    Concerning the description of an application for the approval of installation of a reactor, stipulated in Article 23 paragraph 2 of the Law for Regulation of Nuclear Source Materials, Nuclear Fuel Materials and Reactors (hereinafter referred to as the Law), the following items must be written. Namely, the heat output of the reactor in Article 23 paragraph 2 item 3 of the Law, the position, structure and facilities of the reactor facilities, described according to the stipulated classifications, the work plan, nuclear fuel materials employed, and the disposal of spent fuel. Concerning an application for the approval of a reactor installed aboard a foreign ship, stipulations are made separately. Description of an application for the approval of change of the heat output of a reactor and others should include the stipulated items. When it is wished to undergo inspection of the construction and performance of reactor facilities, an application for that end including the required items should be filed. Various safety measures preventing personnel from being exposed to radiation should be taken. When a foreign atomic-powered ship tries to enter a Japanese port, the stipulated necessary informations should be reported 60 days before such ship actually enters the Japanese port. A chief technician of reactors should take and pass the official examination. (Rikitake, Y.)

  6. Drawings for an exacting author: illustrations from Giovanni Antonio Scopoli's "Deliciae florae et faunae insubricae".

    Science.gov (United States)

    Siviero, Monica; Violani, Carlo

    2006-01-01

    Giovanni Antonio Scopoli (1723-1788) was one of the most versatile naturalists in eighteenth-century Italy. In 1785, Scopoli conceived the ambitious publication, "Deliciae florae et faunae insubricae". Appearing in installments, this included descriptions and illustrations of plants, animals and minerals found in northern Italy. Unfortunately, Scopoli's sudden death halted publication of the "Deliciae" after its third installment. Recently, a corpus of 98 paintings, in the gouache style, were discovered in the Biblioteca Universitaria of Pavia. These gouaches appear to be the basis for plates planned in future installments of the "Deliciae". Marginal notes in Scopoli's handwriting are included. Because Scopoli's plant and animal specimens have been destroyed or dispersed, these drawings are crucial for reconstructing his scientific opus. Combined with other documents, Scopoli's marginal notes also reveal his exacting standards. He criticized the way his artists had poorly rendered the scientific details of the paintings.

  7. Auto Draw from Excel Input Files

    Science.gov (United States)

    Strauss, Karl F.; Goullioud, Renaud; Cox, Brian; Grimes, James M.

    2011-01-01

    The design process often involves the use of Excel files during project development. To facilitate communications of the information in the Excel files, drawings are often generated. During the design process, the Excel files are updated often to reflect new input. The problem is that the drawings often lag the updates, often leading to confusion of the current state of the design. The use of this program allows visualization of complex data in a format that is more easily understandable than pages of numbers. Because the graphical output can be updated automatically, the manual labor of diagram drawing can be eliminated. The more frequent update of system diagrams can reduce confusion and reduce errors and is likely to uncover symmetric problems earlier in the design cycle, thus reducing rework and redesign.

  8. Drawing of uranium in γ phase

    International Nuclear Information System (INIS)

    Stohr, J.A.

    1955-01-01

    It describes the study of working and drawing of uranium in γ phase. In a first part, the forgeable characteristics of uranium metal in the three different phases (α, β and γ) are compared by using BASTIEN-PORTEVIN method. The different experiments are testing the behaviour metal in each phase under different stresses and a temperature gradient as slow and shock traction, slow and shock compression, resilience, flexibility. Results show that optimum conditions for uranium drawing is uranium in phase γ. In a second part, it described the drawing method and process. The uranium rods obtained by this technique are of very good quality. In addition, the material wear is very low which permits a low production cost. Finally, the uranium rod physical properties are studied. (M.P.)

  9. 30 CFR 57.4504 - Fan installations.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fan installations. 57.4504 Section 57.4504... Control Installation/construction/maintenance § 57.4504 Fan installations. (a) Fan houses, fan bulkheads... of combustible materials, except installed wiring, ground and track support, headframes, and direct...

  10. Artistic drawing as a mnemonic device

    Science.gov (United States)

    Baker Christensen, Leslie

    Despite art-based learning being widely used, existing data are primarily qualitative, and most research has not isolated particular variables such as memory for empirical study. The few experiments that have been conducted demonstrated that drawing improves free recall of unpaired words, and retention improves after lessons integrated with drawing, drama, and narrative exercises. To help fill the gap in the current literature, the present study compared the effectiveness of encoding and the rate of memory decay between a drawing mnemonic and note taking on a paired associates task. Using a within-subjects experimental design, participants were presented with word pairs and asked to complete either a drawing mnemonic (DM) or note taking (NT) to assist memorization. Participants were tested immediately after the word pair presentation and after a 20-minute delay. Results supported the hypothesis that the DM condition would produce superior encoding, as evidenced by greater retention on the immediate test. However, no memory decay was observed in the experiment, and therefore results on the delayed test were inconclusive. In fact, scores for the NT condition improved over time whereas the scores for the DM condition did not, which might imply that note taking results in a different consolidation process than drawing. Findings from this study suggested that arts integration can be an effective method to support memory for learned information. Future studies that examine the effect of rehearsal and the long-term effectiveness of a drawing mnemonic are warranted. This dissertation is available in open access at AURA, http://aura.antioch.edu/ and Ohio Link ETD Center, https://etd.ohiolink.edu/etd.

  11. COPD depicted – patients drawing their lungs

    Directory of Open Access Journals (Sweden)

    Kaptein AA

    2017-11-01

    Full Text Available Ad A Kaptein,1 Jitske Tiemensma,2 Elizabeth Broadbent,3 Guus M Asijee,4,5 Maarten Voorhaar4,5 1Medical Psychology, Leiden University Medical Centre (LUMC, Leiden, the Netherlands; 2Psychological Sciences, University of California, Merced, CA, USA; 3Psychology Department, Auckland University Medical School, Auckland, New Zealand; 4CAPHRI School for Public Health and Primary Care, Maastricht University, Maastricht, the Netherlands; 5Boehringer Ingelheim Pharma GmbH & Co. KG, Ingelheim am Rhein, Germany Background: Given the increasing importance of patient-reported outcomes (PRO in quality medical care, we examined the value and feasibility of an innovative method for assessing patients’ illness perceptions, represented in drawings made by patients with COPD of their lungs. Aim: The aim of our study was: to study patients’ representation of COPD as reflected in their drawings of their lungs; and to examine scores on a validated measure that assesses illness perceptions (ie, Brief Illness Perception Questionnaire [B-IPQ]. Patients and methods: One hundred outpatients with COPD, mean age 70 years, selected from a pharmacy database, participated and 98 filled out the B-IPQ. Eighty-seven patients completed the drawing task. Results: The illness perceptions as reflected in the responses to the B-IPQ scales represented a quite optimistic view of COPD and its consequences. The drawings of the lungs reflected a considerable discordance between patients’ representations and medically accepted representations of lungs of a person with COPD. Conclusion: Assessing illness perceptions in clinical care and research about COPD offers opportunities to identify goals for patient education and self-management. Inviting patients to draw their illness is an innovative and promising approach to assessing PRO. Keywords: COPD, drawings, illness perceptions, PRO, quality of life, self-management

  12. Photovoltaics for professionals solar electric systems marketing, design and installation

    CERN Document Server

    Falk, Antony; Remmers, Karl-Heinz

    2007-01-01

    For the building industry, the installation of photovoltaic systems has become a new field of activity. Interest in solar energy is growing and future business prospects are excellent. Photovoltaics for Professionals describes the practicalities of marketing, designing and installing photovoltaic systems, both grid-tied and stand-alone. It has been written for electricians, technicians, builders, architects and building engineers who want to get involved in this expanding industry. It answers all the beginner's questions as well as serving as a textbook and work of reference

  13. Understand the children's anger through tree drawing

    OpenAIRE

    増岡, 怜那; 高橋, 靖恵

    2006-01-01

    When small children (three to six years old) express their anger through inappropriate behavior or over reacting, most parents and other adults find this anger hard to deal with. That is because people see anger as a negative emotion. In actuality expressing anger can be a positive step in emotional development. In this study two kinds of tests were conducted on six years olds. The first test, [Tree drawing test] a drawing of a tree from each subject, was used to measure the individual's leve...

  14. Children's Drawing of Human Figure Analisis

    Directory of Open Access Journals (Sweden)

    Salko Pezo

    2011-08-01

    Full Text Available Beside speech, that helps children to express their feelings and experiences, establish relations with people, the drawing is one of the most truthful ways of its expression. In this paper the results of pleasant and unpleasant emo­tions among children through drawing of human figure are presented. The survey is conducted on 634 children, and the results indicate that there is difference in expressing negative emotions between boys and girls, while at expressing pleasant emotions the results are similar.

  15. Emotional indicators in children's human figure drawings.

    Science.gov (United States)

    Catte, M; Cox, M V

    1999-06-01

    The human figure drawings of a group of emotionally-disturbed boys were compared with those of a group of well-adjusted boys closely matched for chronological age and another for mental age. A comparison based on Koppitz's (1968) original emotional indicators and another, based on new UK norms, showed that the emotionally-disturbed children included significantly more indicators in their drawings than their well-adjusted peers. Although this difference was statistically significant it is actually quite small. In addition, there were no differences among the groups in the kinds of indicators they exhibited. The usefulness of the Koppitz test as a tool for clinical use is questioned.

  16. 49 CFR 572.160 - Incorporation by reference.

    Science.gov (United States)

    2010-10-01

    ... Six-Year-Old Weighted Child Test Dummy § 572.160 Incorporation by reference. (a) The following... package entitled “Parts List and Drawings, Part 572 Subpart S, Hybrid III Weighted Six-Year Old Child Test... part of a complete dummy assembly; (iii) Drawing No. 167-2020 Revision A, dated December 8, 2005, Spine...

  17. Drawing Children into Reading: A Qualitative Case Study of a Preschool Drawing Curriculum

    Science.gov (United States)

    DeFauw, Danielle L.

    2016-01-01

    This article details a qualitative case study of 24 preschool children engaged with step-by-step drawing instruction provided by five educators as they developed their fine motor skills and drew detailed objects using the Drawing Children Into Reading curriculum (Halperin, W. A. (2011a). "Project 50 preschool manual." South Haven, MI:…

  18. Drawing cartoon faces--a functional imaging study of the cognitive neuroscience of drawing.

    Science.gov (United States)

    Miall, R Chris; Gowen, Emma; Tchalenko, John

    2009-03-01

    We report a functional imaging study of drawing cartoon faces. Normal, untrained participants were scanned while viewing simple black and white cartoon line drawings of human faces, retaining them for a short memory interval, and then drawing them without vision of their hand or the paper. Specific encoding and retention of information about the faces were tested for by contrasting these two stages (with display of cartoon faces) against the exploration and retention of random dot stimuli. Drawing was contrasted between conditions in which only memory of a previously viewed face was available versus a condition in which both memory and simultaneous viewing of the cartoon were possible, and versus drawing of a new, previously unseen, face. We show that the encoding of cartoon faces powerfully activates the face-sensitive areas of the lateral occipital cortex and the fusiform gyrus, but there is no significant activation in these areas during the retention interval. Activity in both areas was also high when drawing the displayed cartoons. Drawing from memory activates areas in posterior parietal cortex and frontal areas. This activity is consistent with the encoding and retention of the spatial information about the face to be drawn as a visuo-motor action plan, either representing a series of targets for ocular fixation or as spatial targets for the drawing action.

  19. Hydrocarbon and Toxic Metal Contamination from Tank Installations in a Northwest Greenlandic Village

    DEFF Research Database (Denmark)

    Fritt-Rasmussen, Janne; Jensen, Pernille Erland; Christensen, Rune Haubo Bojesen

    2012-01-01

    Contamination from tank installations in the Arctic is an important issue, since tanks are a necessary feature of all communities, and may be a source of local pollution. Soil samples from below and around three tank installations and one reference site in the Northwest Greenlandic village...

  20. Solar heating, cooling, and domestic hot water system installed at Kaw Valley State Bank and Trust Company, Topeka, Kansas. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-11-01

    The building has approximately 5600 square feet of conditioned space. Solar energy is used for space heating, space cooling, and preheating domestic hot water (DHW). The solar energy system has an array of evacuated tube-type collectors with an area of 1068 square feet. A 50/50 solution of ethylene glycol and water is the transfer medium that delivers solar energy to a tube-in-shell heat exchanger that in turn delivers solar-heated water to a 1100 gallon pressurized hot water storage tank. When solar energy is insufficient to satisfy the space heating and/or cooling demand, a natural gas-fired boiler provides auxiliary energy to the fan coil loops and/or the absorption chillers. Extracts from the site files, specification references, drawings, and installation, operation and maintenance instructions are included.

  1. Tunable metamaterials fabricated by fiber drawing

    DEFF Research Database (Denmark)

    Fleming, Simon; Stefani, Alessio; Tang, Xiaoli

    2017-01-01

    We demonstrate a practical scalable approach to the fabrication of tunable metamaterials. Designed for terahertz (THz) wavelengths, the metamaterial is comprised of polyurethane filled with an array of indium wires using the well-established fiber drawing technique. Modification of the dimensions...

  2. Mixed Movements/performance-based drawing

    DEFF Research Database (Denmark)

    Brabrand, Helle

    2010-01-01

    that question each other, working as well with space-time motives as with expressions and techniques. A series poses questions both to the kind of forces it raises as well as to the kind of sensual affects it produces – to how the body resonates with the rhythms and tensions that appear in the drawing...

  3. Searching for Deeper Meaning in Children's Drawings

    Science.gov (United States)

    Soundy, Cathleen S.

    2012-01-01

    Children delight in "giving voice" to their drawings. If provided the opportunity, children can express powerful and imaginative ideas and make meaning through visual and verbal modes. When adults spend time talking with children about their artwork, they see glimpses of imagination at work, as well as effective uses of language. This article will…

  4. Cognitive Flexibility in Drawings of Bilingual Children

    Science.gov (United States)

    Adi-Japha, Esther; Berberich-Artzi, Jennie; Libnawi, Afaf

    2010-01-01

    A. Karmiloff-Smith's (1990) task of drawing a nonexistent object is considered to be a measure of cognitive flexibility. The notion of earlier emergence of cognitive flexibility in bilingual children motivated the current researchers to request 4- and 5-year-old English-Hebrew and Arabic-Hebrew bilingual children and their monolingual peers to…

  5. Teacher experiences of generating and interpreting drawings

    African Journals Online (AJOL)

    I report on a phenomenological investigation into teacher experiences of generating and interpreting drawings during their participation in the Resilient Educators (REds) intervention. All 18 teacher participants came from rural communities challenged by HIV&AIDS. I reflect critically on the ambivalence in teacher ...

  6. Warm Deep Drawing of Aluminium Sheet

    NARCIS (Netherlands)

    Bolt, P.J.; Werkhoven, R.J.; van den Boogaard, Antonius H.

    2003-01-01

    Aluminium sheet drawing processes can be improved by manipulating local flow behaviour by means of elevated temperatures and temperature gradients in the tooling. Forming tests showed that a substantial improvement is possible not only for 5xxx but also for 6xxx series alloys. Finite element method

  7. A quantitative lubricant test for deep drawing

    DEFF Research Database (Denmark)

    Olsson, David Dam; Bay, Niels; Andreasen, Jan L.

    2010-01-01

    A tribological test for deep drawing has been developed by which the performance of lubricants may be evaluated quantitatively measuring the maximum backstroke force on the punch owing to friction between tool and workpiece surface. The forming force is found not to give useful information...

  8. 9 CFR 355.5 - Drawings.

    Science.gov (United States)

    2010-01-01

    ... CERTIFICATION CERTIFIED PRODUCTS FOR DOGS, CATS, AND OTHER CARNIVORA; INSPECTION, CERTIFICATION, AND... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Drawings. 355.5 Section 355.5 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION...

  9. Drawing as a user experience research tool

    DEFF Research Database (Denmark)

    Fleury, Alexandre

    2011-01-01

    such previous work, two case studies are presented, in which drawings helped investigate the relationship between media technology users and two specific devices, namely television and mobile phones. The experiment generated useful data and opened for further consideration of the method as an appropriate HCI...... research tool....

  10. Computer Program Re-layers Engineering Drawings

    Science.gov (United States)

    Crosby, Dewey C., III

    1990-01-01

    RULCHK computer program aids in structuring layers of information pertaining to part or assembly designed with software described in article "Software for Drawing Design Details Concurrently" (MFS-28444). Checks and optionally updates structure of layers for part. Enables designer to construct model and annotate its documentation without burden of manually layering part to conform to standards at design time.

  11. Children's drawings exhibited in the Globe

    CERN Multimedia

    Elizabeth Roe

    2010-01-01

    "Draw Me A Physicist" has been a success. Members of the public visiting the exhibition in the Globe of Science and Innovation have praised the scientific and creative balance the children of neighbouring France and the Canton of Geneva have obtained through their visit to CERN.   The Draw Me a Physicist exhibition in the Globe For a six-month period 9 to 11-year olds from the Pays de Gex, Meyrin, Satigny and Vernier have been able to enjoy a balance between science and art, through drawing and defining their interpretations of a physicist. In May, eight pairs of drawings from each participating class were selected by the schools to be displayed on the second floor of the Globe. Since the images have been put up, the viewers have enjoyed the contrast between the "before" pictures of vibrant Albert Einsteins to the "after" pictures of casual people sitting in an office. The large room in the Globe has been transformed from a hollow shell int...

  12. Predicting galling behaviour in deep drawing processes

    NARCIS (Netherlands)

    van der Linde, G.

    2011-01-01

    Deep drawing is a sheet metal forming process which is widely used in, for example, the automotive industry. With this process it is possible to form complex shaped parts of sheet metal and it is suitable for products that have to be produced in large numbers. The tools for this process are required

  13. Physical protection of nuclear installations

    International Nuclear Information System (INIS)

    Toepfer, K.

    1989-01-01

    This contribution investigates the possible danger and the legal basis of physical protection and explains the current, integrated system provided for, as well as the underlying possible scenarios of an assault: (1) by a violent crowd of aggressors outside the installation, (2) by a small group of aggressors outside the installation, (3) by a person allowed to enter (internal assault). The physical protection system supplements the internal safety measures to enhance protection against hypothetical and possible acts of terrorism or other criminal assault. The system covers external and internal controlled areas, access monitoring, physical protection control room and service, security checks of the personnel, and activities to disclose sabotage. Some reflections on the problem field between security controls and the constitutional state conclude this contribution. (orig./HSCH) [de

  14. The dismantling of nuclear installations

    International Nuclear Information System (INIS)

    Lacoste, A.C.; Duthe, M.; Mignon, H.; Lambert, F.; Pradel, Ph.; Hillewaere, J.P.; Dupre la Tour, St.; Mandil, C.; Weil, L.; Eickelpasch, N.; Finsterwalder, L.

    1997-01-01

    for nuclear installations, the dismantling is an important part of their exploitation. The technology of dismantling is existing and to get a benefit from the radioactive decay, it seems more easy for operating company such E.D.F. to wait for fifty years before dismantling. But in order to get the knowledge of this operation, the Safety Authority wanted to devote this issue of 'Controle'to the dismantling method. This issue includes: the legal aspects, the risks assessment, the dismantling policy at E.D.F., the site of Brennilis (first French experience of dismantling), the dismantling techniques, the first dismantling of a fuel reprocessing plant, comparison with classical installations, economic aspect, some German experiences, the cleansing of the american site of Handford. (N.C.)

  15. ATLAS Software Installation on Supercomputers

    CERN Document Server

    Undrus, Alexander; The ATLAS collaboration

    2018-01-01

    PowerPC and high performance computers (HPC) are important resources for computing in the ATLAS experiment. The future LHC data processing will require more resources than Grid computing, currently using approximately 100,000 cores at well over 100 sites, can provide. Supercomputers are extremely powerful as they use resources of hundreds of thousands CPUs joined together. However their architectures have different instruction sets. ATLAS binary software distributions for x86 chipsets do not fit these architectures, as emulation of these chipsets results in huge performance loss. This presentation describes the methodology of ATLAS software installation from source code on supercomputers. The installation procedure includes downloading the ATLAS code base as well as the source of about 50 external packages, such as ROOT and Geant4, followed by compilation, and rigorous unit and integration testing. The presentation reports the application of this procedure at Titan HPC and Summit PowerPC at Oak Ridge Computin...

  16. Quality assurance in nuclear installations

    International Nuclear Information System (INIS)

    Torres M, Nelson.

    1985-08-01

    It has been proven that the bad quality of products, equipment, installations, and services is not due to the lack of tests, experiments and verifications. The main causes are associated with insufficient organization of the activities that have influence on the quality. The garantee of quality is conceptualized as an appropriate instrument composed of normalized criteria initially in advanced technologies. Such as nuclear science and aerospace technology. However, with the appropriate modifications it can be applied to conventional technologies

  17. Method of installing well conductors

    International Nuclear Information System (INIS)

    Houser, D.M.

    1991-01-01

    This patent describes a method of installing a well conductor in a marine environment. It comprises sealing a well conductor with a watertight plug; submerging the conductor from an elevated platform; adding additional conductor lengths to the conductor as needed thereby forming a conductor string; adjusting the buoyancy of the string to control the lowering of the string to the sea floor; and drilling through the plug after the conductor string has achieved the desired penetration depth

  18. Seismic evaluation of nuclear installations

    International Nuclear Information System (INIS)

    Mattar Neto, Miguel

    1997-01-01

    Some considerations regarding extreme external events, natural or man-induce, such as earthquakes, floods, air crashes, etc, shall be done for nuclear facilities to minimizing the potential impact of the installation on the public and the environment. In this paper the main aspects of the seismic evaluation of nuclear facilities (except the nuclear power reactors) will be presented based on different codes and standards. (author). 7 refs., 2 tabs

  19. Mounting clips for panel installation

    Science.gov (United States)

    Cavieres, Andres; Al-Haddad, Tristan; Goodman, Joseph

    2017-07-11

    A photovoltaic panel mounting clip comprising a base, central indexing tabs, flanges, lateral indexing tabs, and vertical indexing tabs. The mounting clip removably attaches one or more panels to a beam or the like structure, both mechanically and electrically. It provides secure locking of the panels in all directions, while providing guidance in all directions for accurate installation of the panels to the beam or the like structure.

  20. Installed capacity in New York

    International Nuclear Information System (INIS)

    Charlton, J.

    2006-01-01

    This presentation discussed capacity issues related to the New York Independent System Operator (NYISO). The NYISO's market volume was approximately $11 billion in 2005, and it was responsible for providing 32,075 MW of electricity at peak load to its users. Regulatory uncertainty is currently discouraging investment in new generating resources. All load serving entities are required to contract for sufficient capacity in order to meet their capacity obligations. Market participants currently determine capacity and energy revenues. The NYISO market allows suppliers to recover variable costs for providing ancillary services, and the economic value of the revenue source governs decisions made in the wholesale electricity market. The installed capacity market was designed as a spot auction deficiency auction. Phased-in demand curves are used to modify the installed capacity market's design. A sloped demand curve mechanism is used to value capacity above the minimum requirement for both reliability and competition. Participation in the day-ahead market enhances competition and exerts downward pressure on energy and ancillary service market prices. It was concluded that the market structures and design features of the installed capacity markets recognize the need for system reliability in addition to encouraging robust competition and recognizing energy price caps and regulatory oversights. tabs., figs

  1. Leukaemia near british nuclear installations

    International Nuclear Information System (INIS)

    Hubert, D.

    1991-01-01

    An excess of childhood leukaemia has been seen near some British nuclear installations, especially near the Sellafield reprocessing plant. The same result was found in a more general study including a large number of nuclear sites. Similar studies made in USA, Canada and France have been negative. Moreover, epidemiological studies made in England have discovered other childhood leukaemia clusters in areas far from nuclear facilities, and especially near potential sites of nuclear installations. Several explanations are suggested but no definite conclusion is yet possible. Doses from radioactive releases seem to be too low to account for the additional deaths from leukaemia by environmental contamination. A virus activation, which might be associated with population influx into rural isolated areas, has been considered. The hypothesis of genetic mutation induced by ionising radiation in the fathers of children with leukaemia has been made because a higher risk of leukaemia was observed for children of fathers employed at Sellafield. No firm conclusion is possible considering the small number of observed cases and the lack of excess leukaemias in the offspring of Hiroshima and Nagasaki survivors. The possibility of internal contamination, chemicals or even radon is discussed as other causes. Studies in progress might allow to find an answer to the problem of leukaemia in the vicinity of British nuclear installations [fr

  2. [Requirements for the successful installation of an data management system].

    Science.gov (United States)

    Benson, M; Junger, A; Quinzio, L; Hempelmann, G

    2002-08-01

    Due to increasing requirements on medical documentation, especially with reference to the German Social Law binding towards quality management and introducing a new billing system (DRGs), an increasing number of departments consider to implement a patient data management system (PDMS). The installation should be professionally planned as a project in order to insure and complete a successful installation. The following aspects are essential: composition of the project group, definition of goals, finance, networking, space considerations, hardware, software, configuration, education and support. Project and finance planning must be prepared before beginning the project and the project process must be constantly evaluated. In selecting the software, certain characteristics should be considered: use of standards, configurability, intercommunicability and modularity. Our experience has taught us that vaguely defined goals, insufficient project planning and the existing management culture are responsible for the failure of PDMS installations. The software used tends to play a less important role.

  3. Defense waste solidification studies. Volume 2. Drawing supplement. Savannah River Plant, Project S-1780

    International Nuclear Information System (INIS)

    1977-01-01

    Volume 2 contains the drawings prepared and used in scoping and estimating the Glass-Form Waste Solidification facilities and the alternative studies cited in the report, the Off-Site Shipping Case, the Decontaminated Salt Storage Case, and a revised Reference Plant (Concrete-Form Waste) Case

  4. Using drawings to explore patients’ perceptions of their illness: a scoping review

    Directory of Open Access Journals (Sweden)

    Cheung MMY

    2016-11-01

    Full Text Available Melissa Mei Yin Cheung, Bandana Saini, Lorraine Smith Faculty of Pharmacy, The University of Sydney, Camperdown, NSW, Australia Background: An emerging approach for investigating patient perspectives of their illness is the use of drawings. Objective: This scoping review consolidates findings from current literature regarding the use of drawings to explore patients’ perceptions and experiences of their illness and treatment. Methods: Electronic databases (Medline, PubMed, Embase, PsychINFO, Cinahl, Art Index and Scopus and reference lists were searched to identify published English language studies using participant-generated drawings to explore adults’ perceptions and experiences of their illness and treatment. Using the scoping methodological framework, data were analyzed with respect to each study’s design, key findings and implications. Results: Thirty-two studies were identified and these reflected diversities in both health conditions and methods of data collection and analysis. Participants’ drawings revealed new, insightful knowledge about patients’ perceptions, beliefs and experiences of their condition and were associated with clinical and psychological markers of health. Drawing was a powerful adjunct to traditional data collection approaches, and demonstrated potential benefits for participants. This review provides detailed insights and guidance on the use of drawings in research and clinical practice. Conclusion: Drawing is a novel and potentially valuable technique for exploring patients’ perceptions and experiences about their illness and treatment. Advancing the methodology and applicability of drawings in this area will assist in the future development of this technique, with benefits for the patient, researcher and health care professional alike. Keywords: scoping review, drawing, illness perceptions, patient experience 

  5. Children Gifted in Drawing: The Incidence of Precocious Realism

    Science.gov (United States)

    Drake, Jennifer E.; Winner, Ellen

    2013-01-01

    Although one study has reported that 6% of children with autism spectrum disorder (ASD) have drawing talent, no study has examined the incidence of drawing talent in typical children. We asked 153 children aged 6-12 years to draw a picture of their hand. We scored the drawings for the use of detail, correct proportion, and overall contour;…

  6. Examining Children's Healthcare Experiences through Drawings

    Science.gov (United States)

    Burns-Nader, Sherwood

    2017-01-01

    This study examines children's anxieties about healthcare experiences using drawings. Fifty children, either experiencing a doctor's appointment or hospitalization, completed a drawing of a person in the hospital. Using the Child Drawing: Hospital (CD:H), drawings were scored on individual items which were summed for a total score of projected…

  7. Drawing non-layered tidy trees in linear time

    NARCIS (Netherlands)

    A.J. van der Ploeg (Atze)

    2013-01-01

    htmlabstractThe well-known Reingold–Tilford algorithm produces tidy-layered drawings of trees: drawings where all nodes at the same depth are vertically aligned. However, when nodes have varying heights, layered drawing may use more vertical space than necessary. A non-layered drawing of a tree

  8. 48 CFR 552.236-77 - Specifications and Drawings

    Science.gov (United States)

    2010-10-01

    ... Drawings 552.236-77 Section 552.236-77 Federal Acquisition Regulations System GENERAL SERVICES....236-77 Specifications and Drawings As prescribed in 536.570-8, insert the following clause: Specifications and Drawings (SEP 1999) The requirements of the clause entitled “Specifications and Drawings for...

  9. 18 CFR 4.39 - Specifications for maps and drawings.

    Science.gov (United States)

    2010-04-01

    ... and drawings. 4.39 Section 4.39 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY....39 Specifications for maps and drawings. All required maps and drawings must conform to the following specifications, except as otherwise prescribed in this chapter: (a) Each original map or drawing must consist of...

  10. 48 CFR 252.227-7033 - Rights in shop drawings.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Rights in shop drawings... of Provisions And Clauses 252.227-7033 Rights in shop drawings. As prescribed in 227.7107-(1)(c), use the following clause: Rights in Shop Drawings (APR 1966) (a) Shop drawings for construction means...

  11. 37 CFR 1.83 - Content of drawing.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Content of drawing. 1.83... COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES National Processing Provisions The Drawings § 1.83 Content of drawing. (a) The drawing in a nonprovisional application must show every feature of the...

  12. Monsters of Drawing and Writing Matter

    DEFF Research Database (Denmark)

    Balle, Søren Hattesen

    )phobic Cold War culture and escape from the academic orthodoxies of New Criticism, the latter decreeing the autonomy of poetry and the harmonious integration of form and content in a signifying poetic whole. By experimenting with the interplay between poetry and other artistic genres, their collaborations...... through and around the theme of textual materialization. At the same time as O’Hara and Rivers investigate the often conflicting powers of both genres to incarnate the reality of the material world (especially the human body) in their respective media, they also playfully foreground the materiality...... of artistic/poetic text as so much drawing and writing blending with each other to form new monstrous shapes. This double strategy contributes to a re-inscription of poetry and drawing as sheer physical matter and means of artistic production within that world which they purport to represent in the first...

  13. THE MAIN CHARACTERISTICS OF LUBRICATION FOR WIRE DRAWING FOR METAL CORD, THEIR INFLUENCE ON DRAWING QUALITY

    Directory of Open Access Journals (Sweden)

    A. A. Truhanovich

    2008-01-01

    Full Text Available The physical-chemical characteristics of lubrications for dry wiredrawing are examined. The connection of some parameters with quality of both the drawing process and finished wire is shown.

  14. Are Young Children's Drawings Canonically Biased?

    Science.gov (United States)

    Picard, Delphine; Durand, Karine

    2005-01-01

    In a between-subjects design, 4-to 6-year-olds were asked to draw from three-dimensional (3D) models, two-and-a-half-dimensional (212D) models with or without depth cues, or two-dimensional (2D) models of a familiar object (a saucepan) in noncanonical orientations (handle at the back or at the front). Results showed that canonical errors were…

  15. A NEW TEACHING METHOD OF TECHNICAL DRAWING

    Directory of Open Access Journals (Sweden)

    TOMA Ana-Maria

    2017-05-01

    Full Text Available The paper represents a project of applied research, on how to teach more effectively the subject of technical drawing, using Student - centred education methods. The authors applied a new method of interaction with the students and teaching during a semester and the conclusions were drawn comparing the final results of the classes on which this project was applied with the ones where the classical method of teaching was applied.

  16. Net Zero Energy Military Installations: A Guide to Assessment and Planning

    Energy Technology Data Exchange (ETDEWEB)

    Booth, S.; Barnett, J.; Burman, K.; Hambrick, J.; Westby, R.

    2010-08-01

    The U.S. Department of Defense (DoD) recognizes the strategic importance of energy to its mission, and is working to reduce energy consumption and enhance energy self-sufficiency by drawing on local clean energy sources. A joint initiative formed between DoD and the U.S. Department of Energy (DOE) in 2008 to address military energy use led to a task force to examine the potential for net zero energy military installations, which would produce as much energy on site as they consume in buildings, facilities, and fleet vehicles. This report presents an assessment and planning process to examine military installations for net zero energy potential. Net Zero Energy Installation Assessment (NZEIA) presents a systematic framework to analyze energy projects at installations while balancing other site priorities such as mission, cost, and security.

  17. Quality and safety of nuclear installations: the role of administration, and, nuclear safety and regulatory procedures

    International Nuclear Information System (INIS)

    Queniart, D.

    1979-12-01

    In the first paper the author defines the concepts of safety and quality and describes the means of intervention by the Public Authorities in safety matters of nuclear installations. These include individual authorisations, definition and application of technical rules and surveillance of installations. In the second paper he defines the distinction between radiation protection and safety and presents the legislative and regulatory plan for nuclear safety in France. A central safety service for nuclear installations was created in March 1973 within the Ministry of Industrial and Scientific Development, where, amongst other tasks, it draws up regulatory procedures and organizes inspections of the installations. The main American regulations for light water reactors are outlined and the French regulatory system for different types of reactors discussed

  18. Nuclear installations: decommissioning and dismantling

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    This document is a compilation of seven talks given during the 1995 EUROFORUM conference about decommissioning and dismantling of Nuclear installations in the European Community. The first two papers give a detailed description of the legal, financial and regulatory framework of decommissioning and dismantling of nuclear facilities in the European Union and a review of the currently available decommissioning techniques for inventory, disassembly, decontamination, remote operations and management of wastes. Other papers describe some legal and technical aspects of reactor and plants dismantling in UK, Germany, Spain and France. (J.S.)

  19. Helium transfer line installation details.

    CERN Multimedia

    G. Perinic

    2007-01-01

    A particularity of the 32 m long four in one helium transfer line in between the cold box in USC55 and the cavern UX5 is the fact that the transfer line passes through a hole in the crane rail support beam. In order to ensure the alignment of the suspension rail in the interconnecting tunnel with the hole in the rail support as well as the connection points at both ends required precise measurements of the given geometries as well as the installation of a temporary target for the verification of the theoretical predictions.

  20. Rehyd development and installation report

    International Nuclear Information System (INIS)

    Schuch, R.L.; Woodall, H.N.

    1977-12-01

    Rehyd, a low-impedance, HYDRA-type, water transmission line for bremsstrahlung exposures, was installed on the north side of the REBA facility. Rehyd produces 300 kA beams of 1.2 MeV electrons with a pulse width of 170 ns. Nominal x-ray exposure dose capabilities of 7 cal/g and 20 to 25 kJ were realized thus far. A description is given of the specific design parameters and facility layouts including the unique features of the REBA Marx generator/Rehyd line energy-transfer system. Diode configurations, magnetic-field applications, and output measurements are also presented

  1. Interim essential and support drawing list for K Basins

    International Nuclear Information System (INIS)

    Langevin, M.J.

    1994-01-01

    This document presents a list of essential and support drawings that have been identified as required to achieve the mission objectives of K Basin and are an integral part of the in-progress K Basins system baselining effort. The drawings listed in the appendix are those drawings required to safely operate K Basins. These drawings will be authenticated through the field verification and design reconstitution programs to ensure that these identified drawings are consistent with design requirements

  2. An exploratory study of drawings by bereaved children.

    Science.gov (United States)

    Forrest, M; Thomas, G V

    1991-11-01

    Bereaved and non-bereaved children made drawings of a person, themselves, their family, and a topic of their choice; the drawings were then analysed to investigate whether the experience of bereavement was expressed in drawing in any reliable way. Bereaved children were no more likely than non-bereaved children to include indicators of emotional disturbance in their human figure drawings. Bereaved children, however, were reliably more likely than non-bereaved children to include themselves in a drawing of their family.

  3. Algorithm of composing the schedule of construction and installation works

    Science.gov (United States)

    Nehaj, Rustam; Molotkov, Georgij; Rudchenko, Ivan; Grinev, Anatolij; Sekisov, Aleksandr

    2017-10-01

    An algorithm for scheduling works is developed, in which the priority of the work corresponds to the total weight of the subordinate works, the vertices of the graph, and it is proved that for graphs of the tree type the algorithm is optimal. An algorithm is synthesized to reduce the search for solutions when drawing up schedules of construction and installation works, allocating a subset with the optimal solution of the problem of the minimum power, which is determined by the structure of its initial data and numerical values. An algorithm for scheduling construction and installation work is developed, taking into account the schedule for the movement of brigades, which is characterized by the possibility to efficiently calculate the values of minimizing the time of work performance by the parameters of organizational and technological reliability through the use of the branch and boundary method. The program of the computational algorithm was compiled in the MatLAB-2008 program. For the initial data of the matrix, random numbers were taken, uniformly distributed in the range from 1 to 100. It takes 0.5; 2.5; 7.5; 27 minutes to solve the problem. Thus, the proposed method for estimating the lower boundary of the solution is sufficiently accurate and allows efficient solution of the minimax task of scheduling construction and installation works.

  4. Reliability of the wire drawing dies

    International Nuclear Information System (INIS)

    Sheikh, A.K.; Khany, S.E.

    1993-01-01

    A wear based model is proposed for the dies used in wire drawing process. Using this wear model, it is possible to predict life of the die corresponding to a wear limit criterion. Since various quantities in the model are random in nature the resulting die life will also be random quantity characterized by an appropriate distribution. Using a probabilistic characterization of the parameters of the predictive model, Monte Carlo simulations were conducted to establish the die life distribution. To asses the sensitivity of life distribution with respect to various contributing variables (parameters), the simulation runs were conducted at different levels of these variables (parameters). It is shown that wire drawing die life is Weibull distributed. To compare the simulated results with actual time to failure, data of dies was obtained from a large wire drawing company and was compared with corresponding scenario generated by Monte Carlo simulation. Results obtained by Monte Carlo simulations were very close to the actual time to failure data. (author)

  5. GKIN: a tool for drawing genetic networks

    Directory of Open Access Journals (Sweden)

    Jonathan Arnold

    2012-03-01

    Full Text Available We present GKIN, a simulator and a comprehensive graphical interface where one can draw the model specification of reactions between hypothesized molecular participants in a gene regulatory and biochemical reaction network (or genetic network for short. The solver is written in C++ in a nearly platform independentmanner to simulate large ensembles of models, which can run on PCs, Macintoshes, and UNIX machines, and its graphical user interface is written in Java which can run as a standalone or WebStart application. The drawing capability for rendering a network significantly enhances the ease of use of other reaction network simulators, such as KINSOLVER (Aleman-Meza et al., 2009 and enforces a correct semantic specification of the network. In a usability study with novice users, drawing the network with GKIN was preferred and faster in comparison with entry with a dialog-box guided interface in COPASI (Hoops, et al., 2006 with no difference in error rates between GKIN and COPASI in specifying the network. GKIN is freely available at http://faculty.cs.wit.edu/~ldeligia/PROJECTS/GKIN/.

  6. Proper Installation of Replacement Windows | Efficient Windows

    Science.gov (United States)

    Collaborative Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring

  7. Performance evaluation of buried pipe installation.

    Science.gov (United States)

    2010-05-01

    The purpose of this study is to determine the effects of geometric and mechanical parameters characterizing the soil structure interaction developed in a buried pipe installation located under roads/highways. The drainage pipes or culverts installed ...

  8. 14 CFR 171.159 - Installation requirements.

    Science.gov (United States)

    2010-01-01

    ... Installation requirements. (a) The facility must be installed according to accepted good engineering practices... must have a reliable source of suitable primary power, either from a power distribution system or...

  9. Fiction, drawing and play in a Vygotskian perspective

    DEFF Research Database (Denmark)

    Broström, Stig

    2010-01-01

    of L.S. Vygotsky. Children’s literature, their drawings and play are seen as cultural tools which, when related to Vygotsky’s work (1978a, 1981) allow for the mastery of psychological processes. However, referring to Stetsenko (1999) it is of importance to see the interrelation of three cornerstones......Based on the hypothesis that reading of fiction followed by aesthetic reflection might be a useful tool towards the development of children’s literacy competence in the first years of school, this article constitutes a theoretical approach based on a cultural-historical understanding of the work...... in Vygotsky’s theoretical universe: social interaction, cultural tools and zone of proximal development (Vygotsky, 1978a, 1978d). These cornerstones and new constructions are a basis for the introduction of an educational approach using literature, dialogue and aesthetic means and processes such as children’s...

  10. What Does the DAP:IQ Measure?: Drawing Comparisons between Drawing Performance and Developmental Assessments.

    Science.gov (United States)

    Rehrig, Gwendolyn; Stromswold, Karin

    2018-01-01

    Human figure drawing tasks such as the Draw-a-Person test have long been used to assess intelligence (F. Goodenough, 1926). The authors investigate the skills tapped by drawing and the risk factors associated with poor drawing. Self-portraits of 345 preschool children were scored by raters trained in using the Draw-a-Person Intellectual Ability test (DAP:IQ) rubric (C. R. Reynolds & J. A. Hickman, 2004). Analyses of children's fine motor, gross motor, social, cognitive, and language skills revealed that only fine motor skill was an independent predictor of DAP:IQ scores. Being a boy and having a low birth weight were associated with lower DAP:IQ scores. These findings suggest that although the DAP:IQ may not be a valid measure of cognitive ability, it may be a useful screening tool for fine motor disturbances in at-risk children, such as boys who were born at low birth weights. Furthermore, researchers who use human figure drawing tasks to measure intelligence should measure fine motor skill in addition to intelligence.

  11. When family drawings reveal vulnerabilities and resilience.

    Science.gov (United States)

    Ireland, Rachel; Weisbart, Cindy; Dubowitz, Howard; Rowe, Jeffrey; Stein, Martin T

    2010-04-01

    Sonia's mother was concerned about her 9-year old daughter's aggression, defiant behavior, and distractibility. When she was 4-years, she kicked her bother and he lost a tooth as a result of the trauma. At this time, her pediatrician was concerned about hyperactivity, impulsivity, and defiance of authority and recommended a psychological evaluation. Sonia's father refused an evaluation and responded by physically abusing his wife while demanding a transfer to a new physician. Sonia's mother left her husband at this time and moved away with Sonia. Spousal abuse occurred frequently before the separation, and Sonia may have been physically abused as well. Currently, Sonia is in third grade where she is underperforming in many areas. She enjoys drawing and reading, but struggles to sit quietly and stay on task. Her teacher reports frequent vocal and physical disruptions. Homework takes an inordinate amount of time to complete. She does not have a sustained friendship; her mother feels that this is because other kids do not like being bossed by Sonia. Her mother is concerned about Sonia's behavior especially the unremorseful disruptive behavior toward her younger brother and grandmother. Sonia was born after an uneventful full-term pregnancy without evidence of maternal smoking, drugs, alcohol, or medications. Motor and social developmental milestones were achieved at the appropriate time. Language milestones were achieved early; her mother recalls that Sonia learned to read at the age of 3 years. Sonia's medical history is significant for obesity, seasonal allergic rhinitis, and delayed sleep onset with prolonged awakenings associated with nightmares. Her mother reports that Sonia "worries about everything," including thoughts that her brother will turn into a monster. When an argument occurs at home, she "gets scared," bites her nails, and cries. Sonia currently lives with her mother, 2 younger brothers, step-father, and grandparents. Family history is significant for

  12. Fuel followed control rod installation at AFRRI

    International Nuclear Information System (INIS)

    Moore, Mark; Owens, Chris; Forsbacka, Matt

    1992-01-01

    Fuel Followed Control Rods (FFCRs) were installed at the Armed Forces Radiobiology Research Institute's 1 MW TRIGA Reactor. The procedures for obtaining, shipping, and installing the FFCRs is described. As part of the FFCR installation, the transient rod drive was relocated. Core performance due to the addition of the fuel followed control rods is discussed. (author)

  13. Family Drawings before and after Treatment for Child Conduct Problems: Fluidity of Family Dysfunction

    OpenAIRE

    Kloft, Lilian; Hawes, David; Moul, Caroline; Sultan, Sonia; Dadds, Mark

    2017-01-01

    Children’s drawings have previously been found to reflect their representations of family relationships. The present study examined whether evidence-based parent training for child conduct problems impacts on representations of family functioning using the Family Drawing Paradigm (FDP). N = 53 clinic-referred children (aged 3–15) with conduct problems and their families were assessed pre-treatment and at 6-month follow-up on a modified version of the FDP. Analyses of changes in the FDP reveal...

  14. Installation of the LHC experimental insertions

    CERN Document Server

    Bartolome-Jimenez, S

    2004-01-01

    The installation of the LHC experimental insertions, and particularly the installation of the low-beta quadrupoles, raises many technical challenges due to the stringent alignment specifications and to the difficulty of access in very confined areas. The compact layout with many lattice elements, vacuum components, beam control instrumentation and the presence of shielding does not allow for any improvisation in the installation procedure. This paper reviews all the constraints that need to be taken into account when installing the experimental insertions. It describes the chronological sequence of installation and discusses the technical solutions that have been adopted.

  15. INSTALLATION OF THE LHC EXPERIMENTAL INSERTIONS

    CERN Document Server

    Bartolome-Jimenez, S

    2004-01-01

    The installation of the LHC experimental insertions, and particularly the installation of the Low-Beta quadrupoles, raises many technical challenges due to the stringent alignment specifications and to the difficulty of access in very confined areas. The compact layout with many lattice elements, vacuum components, beam control instrumentation and the presence of shielding does not allow for any improvisation in the installation procedure. This paper reviews all the constraints that need to be taken into account when installing the experimental insertions. It describes the chronological sequence of installation and discusses the technical solutions that have been adopted.

  16. Coordination of the installation and of the commissioning of the machine [LHC

    CERN Document Server

    Foraz, K

    2008-01-01

    The installation of the LHC machine is now finished, and the powering tests are on-going. Since the start of the civil engineering works in 1998, a lot of installation works and tests had been performed by different groups and departments, by different type and size of contracts, and with different technologies. During the last ten years, we had to face different hazards and delays, inherent to a large and complex project. This paper describes the methodology followed by the coordination team, and draw up a balance sheet of the works done so far.

  17. Parametric Design and Rapid Prototyping of Installation Box for Vehicle Terminal PCB

    Directory of Open Access Journals (Sweden)

    Wang Xingxing

    2016-01-01

    Full Text Available Installation box for vehicle terminal PCB (Printed Circuit Board was took as research object, which is encountered in the process of project developing. Vehicle terminal PCB in actual development process was set as an example, point cloud data were acquired by three coordinate measuring method; Imageware software was used to reconstruct the vehicle terminal PCB model, basic size parameters of vehicle terminal PCB can be got and then design parameters of installation box for vehicle terminal PCB can be determined. Design of the installation box for vehicle terminal PCB was completed based on Solidworks software, then 3D modeling and 2D drawing of installation box for vehicle terminal PCB was gained. Up Plus 2 rapid prototype machine was used to manufacture installation box for vehicle terminal PCB rapidly based on 3D printing technology, then prototype of installation box for vehicle terminal PCB was obtained. It is of certain engineering significant for single (small amount manufacturing of installation box for general PCB.

  18. Wind profiler installed in Antarctica

    Science.gov (United States)

    Balsley, B. B.; Carey, J.; Woodman, R. F.; Sarango, M.; Urbina, J.; Rodriguez, R.; Ragaini, E.

    A VHF (50 MHz) wind profiler was installed in Antarctica at the Peruvian Base “Machu Picchu” on King George Island from January 21 to 26. The wind profiler will provide a first look at atmospheric dynamics over the region.The profiler—the first of its kind in Antarctica—is a National Science Foundationsponsored cooperative project of the University of Colorado, the Geophysical Institute of Peru, the University of Piura (Peru), and the Peruvian Navy. This venture was also greatly facilitated by Peru's Comision Nacional de Asuntos Antartidos and Consejo Nacional de Ciencias y Tecnologia, with additional logis tics support provided by the Argentinean Navy and the Uruguayan Air Force.

  19. NEMP effects on domestic installation

    International Nuclear Information System (INIS)

    Braun, C.; Clemens, P.; Graf, W.; Guidi, P.; Schmidt, H.U.

    1985-01-01

    The measurements have been made in a building of a psychiatric clinic at Alzey/West Germany. The building has been chosen for the measuring campaign because it has its own electrical installation for mains current supply and emergency power supply, apart from systems of the other buildings. The two supply systems DONNERSBERG could be cut off completely from the other mains systems, so that coupling and feed experiments could be made without mains voltage. Current supply to the measuring systems was done by means of extension cables, or by batteries. The wiring for connection to the room circuits is parallel to the exterior wall, so that measurements could be done by using a frame antenna placed outside of the building parallel to the exterior wall. (orig./DG) [de

  20. Robust and accurate vectorization of line drawings.

    Science.gov (United States)

    Hilaire, Xavier; Tombre, Karl

    2006-06-01

    This paper presents a method for vectorizing the graphical parts of paper-based line drawings. The method consists of separating the input binary image into layers of homogeneous thickness, skeletonizing each layer, segmenting the skeleton by a method based on random sampling, and simplifying the result. The segmentation method is robust with a best bound of 50 percent noise reached for indefinitely long primitives. Accurate estimation of the recognized vector's parameters is enabled by explicitly computing their feasibility domains. Theoretical performance analysis and expression of the complexity of the segmentation method are derived. Experimental results and comparisons with other vectorization systems are also provided.

  1. A generalization of algebraic surface drawing

    Science.gov (United States)

    Blinn, J. F.

    1982-01-01

    An implicit surface mathematical description of three-dimensional space is defined in terms of all points which satisfy some equation F(x, y, z) equals 0. This form is ideal for space-shaded picture drawing, where the coordinates are substituted for x and y and the equation is solved for z. A new algorithm is presented which is applicable to functional forms other than those of first- and second-order polynomial functions, such as the summation of several Gaussian density distributions. The algorithm was created in order to model electron density maps of molecular structures, but is shown to be capable of generating shapes of esthetic interest.

  2. David Ferrier: brain drawings and brain maps.

    Science.gov (United States)

    Lazar, J Wayne

    2013-01-01

    This chapter has two emphases, one is about the men who influenced the visual representations that David Ferrier (1843-1928) used to illustrate his work on localization of brain functions during the years 1873-1875, namely, Alexander Ecker, John C. Galton, and Ernest Waterlow, and the other is about the nature of medical representations and of Ferrier's illustrations in particular. Medical illustrations are characterized either as pictures, line drawings, or brain maps. Ferrier's illustrations will be shown to be increasingly sophisticated brain maps that contrast with early nineteenth-century standards of medical illustrations, as exemplified by John Bell (1763-1829). © 2013 Elsevier B.V. All rights reserved.

  3. Planning guide for radiologic installations. fascicle 1 -- radiation therapy installations

    International Nuclear Information System (INIS)

    Tuddenham, W.J.

    1976-01-01

    Five articles dealing with the development and operation of radiation therapy facilities present recommendations for the design of various types of radiation therapy facilities, including the university center, the free-standing private oncology center, and the community hospital radiation therapy department. Different concepts of department design are represented. In one article, the planning room is conceived to be the central feature of a facility; in another article, radiation therapy is designed around examination rooms. Shielding requirements are also discussed, as are the advantages and space and licensing requirements of various types of equipment. There is a need for planning appropriate computer facilities in conjunction with other equipment plans, and a critique of one radiation therapy unit is provided. The concept of a regional network for the delivery of radiation therapy services is then explored. The volume contains extensive illustrations in the form of floor plans, drawings, figures, and tables. Many of the articles include a bibliography. This is the first in a series of publications on radiation department design which will be useful to architects, engineers, and hospital planners

  4. Listen to them draw: screening children in primary care through the use of human figure drawings.

    Science.gov (United States)

    Tielsch, Anna H; Allen, Patricia Jackson

    2005-01-01

    This literature review focuses on the Human Figure Drawing (HFD) methods put forth by Elizabeth Koppitz as a screening instrument. Children's drawings have potential as a mental health screening aide for health care practitioners in the primary care setting. This paper focuses on self-portrait drawings as a screening technique for emotional well-being, anxiety, and depression in school-aged children (6-12 years old). Using Koppitz's emotional indicators checklist for mental health, practitioners can use the child's HFD as a quick screening tool. Although the HFD is not diagnostic and can not be used as the sole indicator for anxiety or depression, two or more emotional indicators may signal to the clinician that further psychiatric assessment and referral is needed.

  5. [Asymmetric confusability effects in recognition memory of line drawings].

    Science.gov (United States)

    Uchino, Y; Hakoda, Y; Yamada, N

    2000-06-01

    Experiment 1 and 2 examined the effect of addition or deletion changes in a picture recognition test. Addition and deletion applied to original pictures were referred to deviation change, and addition to deleted pictures or deletion from added pictures was referred to restoration change. In Experiment 1 (n = 40), elaborative detailed information contained in line drawings of scenes was changed whereas one of major features in a single object was changed in Experiment 2 (n = 36). In the test phase, participants indicated whether each test picture was changed or not from the picture they had seen in the study phase. Deviation change had a greater effect on detection performance than restoration only in Experiment 2. Additions were easily detected than deletions only in deviation change in Experiment 2. In Experiment 3, 51 participants rated impression of added or deleted pictures used in Experiment 2. Impression of added pictures was significantly different from that of deleted in 3 factors. These results suggest that superiority of additions over deletions might be due to their different impression change.

  6. JaxoDraw: A graphical user interface for drawing Feynman diagrams

    Science.gov (United States)

    Binosi, D.; Theußl, L.

    2004-08-01

    JaxoDraw is a Feynman graph plotting tool written in Java. It has a complete graphical user interface that allows all actions to be carried out via mouse click-and-drag operations in a WYSIWYG fashion. Graphs may be exported to postscript/EPS format and can be saved in XML files to be used for later sessions. One of JaxoDraw's main features is the possibility to create ? code that may be used to generate graphics output, thus combining the powers of ? with those of a modern day drawing program. With JaxoDraw it becomes possible to draw even complicated Feynman diagrams with just a few mouse clicks, without the knowledge of any programming language. Program summaryTitle of program: JaxoDraw Catalogue identifier: ADUA Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADUA Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Distribution format: tar gzip file Operating system: Any Java-enabled platform, tested on Linux, Windows ME, XP, Mac OS X Programming language used: Java License: GPL Nature of problem: Existing methods for drawing Feynman diagrams usually require some 'hard-coding' in one or the other programming or scripting language. It is not very convenient and often time consuming, to generate relatively simple diagrams. Method of solution: A program is provided that allows for the interactive drawing of Feynman diagrams with a graphical user interface. The program is easy to learn and use, produces high quality output in several formats and runs on any operating system where a Java Runtime Environment is available. Number of bytes in distributed program, including test data: 2 117 863 Number of lines in distributed program, including test data: 60 000 Restrictions: Certain operations (like internal latex compilation, Postscript preview) require the execution of external commands that might not work on untested operating systems. Typical running time: As an interactive program, the running time depends on the complexity

  7. Children’s drawing activities and narratives from their everyday lives

    DEFF Research Database (Denmark)

    Nielsen, Anne Maj

    . In the drawing activity and situation in the specific context various events and material tools and artefacts may appeal to the drawing child in ways that affect the drawing. This is important to take into consideration in research. The presentation includes examples from two research projects that aimed......In the Scandinavian countries it has become common to make children’s perspectives on their own lives in family and child care part of research in these areas. This raises questions about what methods to use when we study young children. In this session the presenter will – together with Grethe...... and the methods are discussed in the presentation. References Braswell, G.S. (2006). Socio-cultural Contexts for the Early Development of Semiotic Production. Psychological Bulletin, American Psychological Association 132 (6): 877–894. Fink-Jensen, K. (2007). Attunement and Bodily Dialogues in Music Education...

  8. Platform-independent method for computer aided schematic drawings

    Science.gov (United States)

    Vell, Jeffrey L [Slingerlands, NY; Siganporia, Darius M [Clifton Park, NY; Levy, Arthur J [Fort Lauderdale, FL

    2012-02-14

    A CAD/CAM method is disclosed for a computer system to capture and interchange schematic drawing and associated design information. The schematic drawing and design information are stored in an extensible, platform-independent format.

  9. How children use drawing to regulate their emotions.

    Science.gov (United States)

    Drake, Jennifer E; Winner, Ellen

    2013-01-01

    We examined two ways in which drawing may function to elevate mood in children-venting (expressing negative feelings) and distraction (expressing something unrelated to the negative feelings). We examined the effectiveness of drawing as an emotion regulator when drawing is used to vent versus distract (Study 1) and tested whether the effects found are specific to the activity of creating one's own drawing or generalisable to a drawing activity in which children had to copy another's drawing (Study 2). To induce a negative mood, we asked children to think of a disappointing event. Mood was assessed before and after the assigned activity. In both studies, mood improved significantly more in the distract than in the vent or copy condition. Study 1 demonstrates that drawing improves mood in children via distraction and not via venting. Study 2 demonstrates that this effect is specific to a drawing task in which an image is freely constructed. When a copying task is used, the effect disappears.

  10. Photographic and drafting techniques simplify method of producing engineering drawings

    Science.gov (United States)

    Provisor, H.

    1968-01-01

    Combination of photographic and drafting techniques has been developed to simplify the preparation of three dimensional and dimetric engineering drawings. Conventional photographs can be converted to line drawings by making copy negatives on high contrast film.

  11. Analysis of engineering drawings and raster map images

    CERN Document Server

    Henderson, Thomas C

    2013-01-01

    Presents up-to-date methods and algorithms for the automated analysis of engineering drawings and digital cartographic maps Discusses automatic engineering drawing and map analysis techniques Covers detailed accounts of the use of unsupervised segmentation algorithms to map images

  12. 7 CFR 97.9 - Drawings and photographs.

    Science.gov (United States)

    2010-01-01

    ...) Drawings or photographs shall be in color when color is a distinguishing characteristic of the variety, and the color shall be described by use of Nickerson's or other recognized color chart. (c) Drawings...

  13. System design and installation for RS600 programmable control system for solar heating and cooling

    Science.gov (United States)

    1978-01-01

    Procedures for installing, operating, and maintaining a programmable control system which utilizes a F8 microprocessor to perform all timing, control, and calculation functions in order to customize system performance to meet individual requirements for solar heating, combined heating and cooling, and/or hot water systems are described. The manual discusses user configuration and options, displays, theory of operation, trouble-shooting procedures, and warranty and assistance. Wiring lists, parts lists, drawings, and diagrams are included.

  14. Nuclear installations and childhood cancer in the UK

    International Nuclear Information System (INIS)

    Goldsmith, J.R.

    1992-01-01

    Data on cancer incidence and mortality near nuclear installations in England and Wales have been published, covering the period 1959-1980. Several age classes and a number of cancer sites have been included. Systematic analysis has so far been limited to cancer mortality. This suggests that childhood leukemia is unusually frequent near some types of installations and the excess is greater for years 0-9 than for later ages. In the earlier decade, 1959-1969, there was questionable consistency of incidence reporting. This report uses the incidence and mortality data only for the period 1971-1980; leukemia and non-leukemia cancer data for those 0-9 years are analyzed, and consistency of incidence reporting is evaluated by comparing incidence and mortality. For comparison with reported data for grouped local authority areas (LAAs) near to 21 different installations, 2 sources of expected incidence are used. The first is based on regional data, and the second is based on a group of LAAs similar in location, urban/rural character and population size. The results of this study confirm Cook-Mozaffari et al.'s findings by mortality analysis for the group of installations involved in non-power producing nuclear technology. This study sheds no light on the possible basis for the association, which remains to be clarified. Initial steps have been taken by Gardner et al. using case-referent methods. (author). 15 refs., 3 figs., 7 tabs

  15. Preparation of site emergency preparedness plans for nuclear installations

    International Nuclear Information System (INIS)

    1999-10-01

    Safety of public, occupational workers and the protection of environment should be assured while activities for economic and social progress are pursued. These activities include the establishment and utilisation of nuclear facilities and use of radioactive sources. This safety guidelines is issued as a lead document to facilitate preparation of specific site manuals by the responsible organisation for emergency response plans at each site to ensure their preparedness to meet any eventuality due to site emergency in order to mitigate its consequences on the health and safety of site personnel. It takes cognizance of an earlier AERB publications on the subject: Safety manual on site emergency plan on nuclear installations. AERB/SM/NISD-1, 1986 and also takes into consideration the urgent need for promoting public awareness and drawing up revised emergency response plans, which has come about in a significant manner after the accidents at Chernobyl and Bhopal

  16. Assembly for the deformation by drawing in cryogenic conditions

    International Nuclear Information System (INIS)

    Volchok, O.I.; Dmitrenko, L.I.; Yaes, N.A.

    2003-01-01

    Design of the assembly for the drawing in liquid nitrogen is described. Such a design ensures the tensor recording of drawing force, the wire arrangement on the drawing force dram, the drawing realization with the linear ultrasonic (f approx 20 kHz) mechanical vibrations superposition. The comparative data of some material samples physical-mechanical properties are presented. The presented data demonstrate the low temperature deformation efficiency

  17. Using Drawing in Designing Educational Software with Children

    DEFF Research Database (Denmark)

    Andersen, Kristine

    2002-01-01

    Experience with children's drawings in design inquiry shows that drawing can be a way for the child to express his or her needs and wishes to a specific design and navigation. I suggest to focus on children's drawings as a means of expression about learning. My design experience show that drawings...... can serve as objects for dialogues with children when evaluating and designing digital educational material....

  18. Factors that determine development of the ability to draw

    Directory of Open Access Journals (Sweden)

    Jorge Luis Dahik Cabrera

    2016-03-01

    Full Text Available In this investigation, the necessary factors are determined to structure a drawing representing an object, a brief description of the functions of the cerebral hemispheres, the theory of multiple bits of intelligence Gardner, capacities of representation and perception involved in the skill is reviewed and ability to draw. This work aims to be the beginning of a larger study, where they plan to measure the ability to draw in students, in order to experiment with alternative methodologies for teaching drawing.

  19. A graph rewriting programming language for graph drawing

    OpenAIRE

    Rodgers, Peter

    1998-01-01

    This paper describes Grrr, a prototype visual graph drawing tool. Previously there were no visual languages for programming graph drawing algorithms despite the inherently visual nature of the process. The languages which gave a diagrammatic view of graphs were not computationally complete and so could not be used to implement complex graph drawing algorithms. Hence current graph drawing tools are all text based. Recent developments in graph rewriting systems have produced computationally com...

  20. Morphing Planar Graph Drawings with a Polynomial Number of Steps

    DEFF Research Database (Denmark)

    Alamdari, Soroush; Angelini, Patrizio; Chan, Timothy M.

    2013-01-01

    In 1944, Cairns proved the following theorem: given any two straight-line planar drawings of a triangulation with the same outer face, there exists a morph (i.e., a continuous transformation) between the two drawings so that the drawing remains straight-line planar at all times. Cairns’s original...

  1. Children's Family Drawings: A Study of Attachment, Personality, and Adjustment

    Science.gov (United States)

    Goldner, Limor; Scharf, Miri

    2011-01-01

    This study examined the relationship between children's attachment security, as manifested in their family drawings, and their personality and adjustment. Family drawings were collected from 222 Israeli children, as well as data regarding their personality and adjustment. Each drawing was coded and classified into 1 of 4 attachment categories…

  2. Children's Graphical Representations and Emergent Writing: Evidence from Children's Drawings

    Science.gov (United States)

    Wu, Li-Yuan

    2009-01-01

    Previous research on children's drawing and writing focused on children's drawing and symbolization with syllabic languages, providing little information regarding young children's symbolization in drawing with a logo language. This study investigated children's emergent writing by examining qualitatively how children's writing takes place as…

  3. Brief Report: Human Figure Drawings by Children with Asperger's Syndrome

    Science.gov (United States)

    Lim, Hui Keow; Slaughter, Virginia

    2008-01-01

    Twenty-nine children with Asperger's syndrome and 28 typically developing children, matched on gender, chronological age and nonverbal IQ, were asked to produce a free drawing, then requested to draw a person, a house and a tree. The drawings were scored using standardized procedures for assessing accuracy, detail and complexity. There were no…

  4. Drawing with Children: An Experiment in Assisted Creativity

    Science.gov (United States)

    Kouvou, Ourania

    2016-01-01

    This report outlines the cognitive accomplishments of young children involved in graphic dialogue with adults. A token of collaborative drawing is examined exhibiting the degree to which adult informed tutoring enabled children in their drawing development, enhanced their motivation and ability in narration and resulted in drawings meaningful to…

  5. Waste Receiving and Processing Facility (WRAP) Drawing List

    International Nuclear Information System (INIS)

    WEIDERT, J.R.

    1999-01-01

    This supporting document delineates the process of identification, categorization, and/or classification of the WRAP facility drawings used to support facility operations and maintenance. This document provides a listing of those essential or safety related drawings which have been identified to date. All other WRAP facility drawings have been classified as general

  6. 10 CFR 72.150 - Instructions, procedures, and drawings.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Instructions, procedures, and drawings. 72.150 Section 72... WASTE Quality Assurance § 72.150 Instructions, procedures, and drawings. The licensee, applicant for a... documented instructions, procedures, or drawings of a type appropriate to the circumstances and shall require...

  7. 37 CFR 1.85 - Corrections to drawings.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Corrections to drawings. 1.85... COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES National Processing Provisions The Drawings § 1.85 Corrections to drawings. (a) A utility or plant application will not be placed on the files for examination...

  8. 37 CFR 1.81 - Drawings required in patent application.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Drawings required in patent..., DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES National Processing Provisions The Drawings § 1.81 Drawings required in patent application. (a) The applicant for a patent is required to furnish...

  9. 10 CFR 71.111 - Instructions, procedures, and drawings.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Instructions, procedures, and drawings. 71.111 Section 71... MATERIAL Quality Assurance § 71.111 Instructions, procedures, and drawings. The licensee, certificate..., procedures, or drawings of a type appropriate to the circumstances and shall require that these instructions...

  10. 48 CFR 536.570-8 - Specifications and drawings.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Specifications and drawings. 536.570-8 Section 536.570-8 Federal Acquisition Regulations System GENERAL SERVICES... 536.570-8 Specifications and drawings. Insert the clause at 552.236-77, Specifications and Drawings...

  11. 33 CFR 117.9 - Delaying opening of a draw.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Delaying opening of a draw. 117.9... DRAWBRIDGE OPERATION REGULATIONS General Requirements § 117.9 Delaying opening of a draw. No person shall unreasonably delay the opening of a draw after the signals required by § 117.15 have been given. Note: Trains...

  12. Two Methods for Antialiased Wireframe Drawing with Hidden Line Removal

    DEFF Research Database (Denmark)

    Bærentzen, Jakob Andreas; Munk-Lund, Steen; Gjøl, Mikkel

    2008-01-01

    Two novel and robust techniques for wireframe drawing are proposed. Neither suffer from the well-known artifacts associated with the standard two pass, offset based techniques for wireframe drawing. Both methods draw prefiltered lines and produce high-quality antialiased results without super...

  13. 40 CFR 35.3160 - Cash draw rules.

    Science.gov (United States)

    2010-07-01

    ... refinancing or purchase of the local debt. Cash draws for incurred building costs will generally be treated as refinanced costs. (2) The State may immediately draw cash for up to five percent of each fiscal year's... actual construction cost. In the latter case, the amount of the cash draw would be the actual...

  14. 75 FR 32459 - Notice Announcing Preliminary Permit Drawing

    Science.gov (United States)

    2010-06-08

    ... Drawing May 28, 2010. In the matter of: Three Rivers Park District, Project No. 13457- 000, BOST1... Secretary of the Commission, or her designee, will, by random drawing, determine the filing priority for the two applicants identified in this notice. The drawing is open to the public and will be held in room...

  15. 76 FR 16408 - Notice Announcing Preliminary Permit Drawing

    Science.gov (United States)

    2011-03-23

    ... Drawing Lock+ Hydro Friends Fund XXXVII.. Project No. 13738-000. FFP Missouri 6, LLC Project No. 13761-000... random drawing to determine the filing priority of the applicants identified in this notice. The...\\ The priority established by this drawing will be used to determine which applicant, among those with...

  16. 77 FR 10739 - Notice Announcing Preliminary Permit Drawing

    Science.gov (United States)

    2012-02-23

    ... Drawing Project No. FFP Project 91, LLC 14275-000 Riverbank Hydro No. 23, LLC 14279-000 Lock+ Hydro... conduct a random drawing to determine the filing priority of the applicants identified in this notice. The...\\ The priority established by this drawing will be used to determine which applicant, among those with...

  17. 76 FR 4894 - Notice Announcing Preliminary Permit Drawing

    Science.gov (United States)

    2011-01-27

    ... Drawing January 20, 2011. Lock Hydro Friends Fund XLI Project No. 13736-000 Allegheny 7 Hydro, LLC Project... Secretary of the Commission, or her designee, will, by random drawing, determine the filing priority for the two applicants identified in this notice. The drawing is open to the public and will be held in room...

  18. 7 CFR 61.34 - Drawing and preparation of sample.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Drawing and preparation of sample. 61.34 Section 61.34 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Cottonseed Samplers § 61.34 Drawing and preparation of sample. Each licensed cottonseed sampler shall draw...

  19. 40 CFR 280.112 - Drawing on financial assurance mechanisms.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Drawing on financial assurance... OF UNDERGROUND STORAGE TANKS (UST) Financial Responsibility § 280.112 Drawing on financial assurance... agency may draw on a standby trust fund when: (1) The Director makes a final determination that a release...

  20. Preschool Drawing and School Mathematics: The Nature of the Association

    Science.gov (United States)

    Malanchini, Margherita; Tosto, Maria G.; Garfield, Victoria; Dirik, Aysegul; Czerwik, Adrian; Arden, Rosalind; Malykh, Sergey; Kovas, Yulia

    2016-01-01

    The study examined the etiology of individual differences in early drawing and of its longitudinal association with school mathematics. Participants (N = 14,760), members of the Twins Early Development Study, were assessed on their ability to draw a human figure, including number of features, symmetry, and proportionality. Human figure drawing was…

  1. 76 FR 4893 - Notice Announcing Preliminary Permit Drawing

    Science.gov (United States)

    2011-01-27

    ... Drawing January 20, 2011. Lock Hydro Friends Fund XXXV Project No. 13735-000 FFP Missouri 7, LLC Project... Commission, or her designee, will, by random drawing, determine the filing priority for the three applicants identified in this notice. The drawing is open to the public and will be held in room 2C, the Commission...

  2. 76 FR 16409 - Notice Announcing Preliminary Permit Drawing

    Science.gov (United States)

    2011-03-23

    ... Drawing Lock+ Hydro Friends Fund XXXIV... Project No. 13742-000. FFP Missouri 5, LLC Project No. 13757-000... Commission, or her designee, will conduct a random drawing to determine the filing priority of the applicants... section 4.37 of its regulations.\\3\\ The priority established by this drawing will be used to determine...

  3. 76 FR 16407 - Notice Announcing Preliminary Permit Drawing

    Science.gov (United States)

    2011-03-23

    ... Drawing Lock+ Hydro Friends Fund XLVI.... Project No. 13734-000. FFP Missouri 17, LLC Project No. 13754... Secretary of the Commission, or her designee, will conduct a random drawing to determine the filing priority... applications as provided in section 4.37 of its regulations.\\3\\ The priority established by this drawing will...

  4. 77 FR 24197 - Notice Announcing Preliminary Permit Drawing

    Science.gov (United States)

    2012-04-23

    ... Drawing Mississippi 8 Hydro, LLC Project No. 13010-002. FFP Project 98, LLC Project No. 14272-000. The..., or her designee, will conduct a random drawing to determine the filing priority of the applicants... section 4.37 of its regulations.\\2\\ The priority established by this drawing will be used to determine...

  5. Communicating and Thinking through Drawing Activity in Early Childhood

    Science.gov (United States)

    Papandreou, Maria

    2014-01-01

    This article considers drawing as a meaning-making activity that takes place in certain sociocultural contexts to find evidence for its communicative potentials as well as the relationship between thought and drawing in early childhood. The researcher challenges traditional views about young children's drawing that focus on the result of the…

  6. 77 FR 9915 - Notice Announcing Preliminary Permit Drawing

    Science.gov (United States)

    2012-02-21

    ... Drawing Lock+ Hydro Friends Fund XLI Project No. 14182-000 FFP Project 54, LLC Project No. 14192-000 The... her designee, will conduct a random drawing to determine the filing priority of the applicants... section 4.37 of its regulations.\\2\\ The priority established by this drawing will be used to determine...

  7. 76 FR 15972 - Notice Announcing Preliminary Permit Drawing

    Science.gov (United States)

    2011-03-22

    ... Drawing Project No. Lock+ Hydro Friends Fund XXXVIII 13744-000 FFP Missouri 12, LLC 13755-000 Allegheny 2... Secretary of the Commission, or her designee, will conduct a random drawing to determine the filing priority... applications as provided in section 4.37 of its regulations.\\2\\ The priority established by this drawing will...

  8. Drawing on Student Knowledge of Neuroanatomy and Neurophysiology

    Science.gov (United States)

    Slominski, Tara N.; Momsen, Jennifer L.; Montplaisir, Lisa M.

    2017-01-01

    Drawings are an underutilized assessment format in Human Anatomy and Physiology (HA&P), despite their potential to reveal student content understanding and alternative conceptions. This study used student-generated drawings to explore student knowledge in a HA&P course. The drawing tasks in this study focused on chemical synapses between…

  9. Standard digital reference images for titanium castings

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 The digital reference images provided in the adjunct to this standard illustrate various types and degrees of discontinuities occurring in titanium castings. Use of this standard for the specification or grading of castings requires procurement of the adjunct digital reference images, which illustrate the discontinuity types and severity levels. They are intended to provide the following: 1.1.1 A guide enabling recognition of titanium casting discontinuities and their differentiation both as to type and degree through digital radiographic examination. 1.1.2 Example digital radiographic illustrations of discontinuities and a nomenclature for reference in acceptance standards, specifications and drawings. 1.2 The digital reference images consist of seventeen digital files each illustrating eight grades of increasing severity. The files illustrate seven common discontinuity types representing casting sections up to 1-in. (25.4-mm). 1.3 The reference radiographs were developed for casting sections up to 1...

  10. Spectrometric assembly for portable installations

    International Nuclear Information System (INIS)

    Kluger, A.; Popescu, C.

    1997-01-01

    The components of the portable spectrometric assembly are: - the detecting probe with Na I(Tl) crystal and air-tight case of industrial type; - a microcomputer; - a unit of analogical processing of the signal from the detecting probe; - a single-channel analyzer with adjustable threshold; - commands and display module; - a source of high voltage; - an electrical supply battery. The device uses the method of gamma photons detection in energetic windows. Through theoretical and experimental studies carried out during the prototype development phase, the superiority of this method has been proved as compared with the installations which make use of the classical principle of photon integral detection. The achieved prototype has a basic program enabling the setting of all working parameters (measuring time, discriminating thresholds, discriminators operating conditions, etc.). Through the included interface RS232 it is possible to transmit the data to a more powerful computer in order to continually process the results. The spectrometric assembly, realized on the basis of micro-computers, can be used in a wide range of applications: measurement of thickness and erosion of walls and tubes, measurement of level in closed containers, of soil density, etc. The adjustment for specific application is performed only through a program modification. (authors)

  11. ID Barrel installed in cryostat

    CERN Multimedia

    Apsimon, R.; Romaniouk, A.

    Wednesday 23rd August was a memorable day for the Inner Detector community as they witnessed the transport and installation of the central part of the inner detector (ID-barrel) into the ATLAS detector. Many members of the collaboration gathered to witness this moment at Point 1. After years of design, construction and commissioning, the outer two detectors (TRT and SCT) of the ID barrel were moved from the SR1 cleanroom to the ATLAS cavern. The barrel was moved across the car park from building 2175 to SX1. Although only a journey of about 100 metres, this required weeks of planning and some degree of luck as far as the weather was concerned. Accelerometers were fitted to the barrel to provide real-time monitoring and no values greater than 0.1 g were recorded, fully satisfying the transport specification for this extremely precise and fragile detector. Muriel, despite her fear of heights, bravely volunteered to keep a close eye on the detector. Swapping cranes to cross the entire parking lot, while Mur...

  12. Diagnosis of OCD Patients Using Drawing Features of Bender Gestalt Shapes

    Directory of Open Access Journals (Sweden)

    Boostani R.

    2017-03-01

    Full Text Available Background: Since psychological tests such as questionnaire or drawing tests are almost qualitative, their results carry a degree of uncertainty and sometimes subjectivity. The deficiency of all drawing tests is that the assessment is carried out after drawing the objects and lots of information such as pen angle, speed, curvature and pressure are missed through the test. In other words, the psychologists cannot assess their patients while running the tests. One of the famous drawing tests to measure the degree of Obsession Compulsion Disorder (OCD is the Bender Gestalt, though its reliability is not promising. Objective: The main objective of this study is to make the Bender Gestalt test quantitative; therefore, an optical pen along with a digital tablet is utilized to preserve the key drawing features of OCD patients during the test. Materials and Methods: Among a large population of patients who referred to a special clinic of OCD, 50 under therapy subjects voluntarily took part in this study. In contrast, 50 subjects with no sign of OCD performed the test as a control group. This test contains 9 shapes and the participants were not constraint to draw the shapes in a certain interval of time; consequently, to classify the stream of feature vectors (samples through drawing Hidden Markov Model (HMM is employed and its flexibility increased by incorporating the fuzzy technique into its learning scheme. Results: Applying fuzzy HMM classifier to the data stream of subjects could classify two groups up to 95.2% accuracy, whereas the results by applying the standard HMM resulted in 94.5%. In addition, multi-layer perceptron (MLP, as a strong static classifier, is applied to the features and resulted in 86.6% accuracy. Conclusion: Applying the pair of T-test to the results implies a significant supremacy of the fuzzy HMM to the standard HMM and MLP classifiers.

  13. Diagnosis of the OCD Patients using Drawing Features of the Bender Gestalt Shapes.

    Science.gov (United States)

    Boostani, R; Asadi, F; Mohammadi, N

    2017-03-01

    Since psychological tests such as questionnaire or drawing tests are almost qualitative, their results carry a degree of uncertainty and sometimes subjectivity. The deficiency of all drawing tests is that the assessment is carried out after drawing the objects and lots of information such as pen angle, speed, curvature and pressure are missed through the test. In other words, the psychologists cannot assess their patients while running the tests. One of the famous drawing tests to measure the degree of Obsession Compulsion Disorder (OCD) is the Bender Gestalt, though its reliability is not promising. The main objective of this study is to make the Bender Gestalt test quantitative; therefore, an optical pen along with a digital tablet is utilized to preserve the key drawing features of OCD patients during the test. Among a large population of patients who referred to a special clinic of OCD, 50 under therapy subjects voluntarily took part in this study. In contrast, 50 subjects with no sign of OCD performed the test as a control group. This test contains 9 shapes and the participants were not constraint to draw the shapes in a certain interval of time; consequently, to classify the stream of feature vectors (samples through drawing) Hidden Markov Model (HMM) is employed and its flexibility increased by incorporating the fuzzy technique into its learning scheme. Applying fuzzy HMM classifier to the data stream of subjects could classify two groups up to 95.2% accuracy, whereas the results by applying the standard HMM resulted in 94.5%. In addition, multi-layer perceptron (MLP), as a strong static classifier, is applied to the features and resulted in 86.6% accuracy. Applying the pair of T-test to the results implies a significant supremacy of the fuzzy HMM to the standard HMM and MLP classifiers.

  14. Draw It Again Sam: The Effect of Drawing on Children's Suggestibility and Source Monitoring Ability.

    Science.gov (United States)

    Bruck, Maggie; Melnyk, Laura; Ceci, Stephen J.

    2000-01-01

    Examined the effects of drawing true and false reminders about a previously experienced magic show on 3- to 6-year-olds' suggestibility and source monitoring ability. Found that children who had drawn the reminders had better recall of reminders and better source memory than children who had only answered questions about them. Both groups reported…

  15. Civilian protection and Britain's commercial nuclear installations

    International Nuclear Information System (INIS)

    1981-01-01

    The subject is treated as follows: initial conclusions (major nuclear attack on military installations; nuclear attack including civil nuclear targets; conventional attack on civil nuclear installations); nature of nuclear weapons explosions and power reactor releases (general; dose effects and biologically significant isotopes; nuclear weapon effects; effect of reactors and other fuel-cycle installations in a thermonuclear area; implications of reactor releases due to conventional attack, sabotage, civil disorder or major accident). (U.K.)

  16. Modern electrical installation for craft students

    CERN Document Server

    Scaddan, Brian

    2013-01-01

    Modern Electrical Installation for Craft Students, Volume 2, Third Edition discusses several topics concerning electrical installations. The book is comprised of eight chapters that deal with craft theory, associated subjects, and electrical industries. Chapter 1 covers inductors and inductance, while Chapter 2 tackles capacitors and capacitance. Chapter 3 deals with inductance and capacitance in installation work. The book also discusses cells, batteries, and transformers. The electrical industries, control and earthing, and testing are also dealt with. The last chapter discusses the basic el

  17. Drawing and writing: An ALE meta-analysis of sensorimotor activations.

    Science.gov (United States)

    Yuan, Ye; Brown, Steven

    2015-08-01

    Drawing and writing are the two major means of creating what are referred to as "images", namely visual patterns on flat surfaces. They share many sensorimotor processes related to visual guidance of hand movement, resulting in the formation of visual shapes associated with pictures and words. However, while the human capacity to draw is tens of thousands of years old, the capacity for writing is only a few thousand years old, and widespread literacy is quite recent. In order to compare the neural activations for drawing and writing, we conducted two activation likelihood estimation (ALE) meta-analyses for these two bodies of neuroimaging literature. The results showed strong overlap in the activation profiles, especially in motor areas (motor cortex, frontal eye fields, supplementary motor area, cerebellum, putamen) and several parts of the posterior parietal cortex. A distinction was found in the left posterior parietal cortex, with drawing showing a preference for a ventral region and writing a dorsal region. These results demonstrate that drawing and writing employ the same basic sensorimotor networks but that some differences exist in parietal areas involved in spatial processing. Copyright © 2015 Elsevier Inc. All rights reserved.

  18. Current status and installation of dental PACS

    International Nuclear Information System (INIS)

    Park, Chang Seo; Kim, Kee Deog; Park, Hyok; Jeong, Ho Gul

    2004-01-01

    Picture Archiving and Communication System (PACS) is difficult to implement in the best of situations, but evidence is growing that the benefits are significant. The aims of this study are to analyze the current status of full PACS and establish successful installation standard of dental PACS. Materials and Methods were based on the investigation of current working status and installation standard of PACS, and observation of variable issues to installation of dental PACS. By September 30, 2004, full PACS implementations in their facilities were 88.1% in specialized general hospitals (37 installations out of total 42 hospitals), 59.8% in general hospitals (144 installations out of total 241 hospitals), 12.3% in medical hospitals (116 installations out of total 941 hospitals) and 3.6% in dental hospitals (4 installations out of total 110 hospitals). Only 4 university dental hospitals currently have installed and are operating full PACS. Major obstacle to wide spread of dental PACS is initial high investments. Clinical environments of dental PACS differed from medical situation. Because of characteristic dental practice, the initial investments for dental PACS are generally much greater than those of medical PACS. Also new economic crisis makes users scruple. The best way to overcome these limitations is to establish an economic installation standard for dental PACS. Also the clear technical communication between the customer and the supplier before both sides are committed to the obstacles are critical to its success.

  19. Safety of nuclear installations in Slovakia

    International Nuclear Information System (INIS)

    1998-01-01

    In this part next aspects are described: (1) Site selection (Legislation related to site selection; Meeting criteria at Bohunice and Mochovce sites; International agreements); (2) Design preparation and construction (Designing and construction-relevant legislation; Nuclear installation project preparation of nuclear installation at Mochovce site); (3) Operation (Operator licensing procedure; Operation limits and conditions; Maintenance testing and control documentation for management and operation; Technical support of operation; Analysis of events at nuclear installations and Radioactive waste production); (4) Planned safety upgrading activities at nuclear installations

  20. 14 CFR 171.9 - Installation requirements.

    Science.gov (United States)

    2010-01-01

    ...) The facility must be installed according to accepted good engineering practices, applicable electric... a power distribution system or locally generated, with a supplemental standby system, if needed. (c...

  1. Safeguards Strategy in Physical Protection System for Nuclear Installation

    International Nuclear Information System (INIS)

    Ade lndra B; Kasturi; Tatang Eryadi

    2004-01-01

    Safeguards strategy is directed at efforts of eliminating theft of nuclear materials and sabotage of nuclear installation. For achieving the above objective, it is necessary to set up safeguards strategy in physical protection of nuclear materials and installation. The safeguards strategy starts from anticipated security condition, list of thefts, planning referred to as safeguards planning. Safeguards planning are implemented in safeguards implementation, followed up then by evaluation. Results of evaluation are equipped with results of safeguards survey already developed. Safeguards' planning is made from these results and serve as guidelines for next safeguards implementation and is repeated to form a safeguard cycle. One safeguard cycle is made on a periodical basis, at least annually. (author)

  2. Fabricating tungsten crucibles by drawing and extrusion spinning

    International Nuclear Information System (INIS)

    Edstrom, C.M.

    1981-01-01

    The fabrication of seamless tungsten crucibles 127-mm ID x 265-mm high x 6.25-mm wall thickness (5 in. x 10 1/2 in. x 1/4 in.) involved three drawing operations and extrusion spinning. The success of the drawing operations came from a combination of low draw reduction percentage, generous draw radii, large punch-to-die clearance, and attention to drawing temperature. The extrusion spinning success related to good drawn-cup-to-spinning-mandrel fit prior to making the extrusion passes, removal of stress risers in the part prior to spinning, and special attention to part and mandrel temperature

  3. Lifetime Evaluation of Grid-Connected PV Inverters Considering Panel Degradation Rates and Installation Sites

    OpenAIRE

    Sangwongwanich, Ariya; Yang, Yongheng; Sera, Dezso; Blaabjerg, Frede

    2018-01-01

    Lifetime of PV inverters is affected by the installation sites related to different solar irradiance and ambient temperature profiles (also referred to as mission profiles). In fact, the installation site also affects the degradation rate of the PV panels, and thus long-term energy production and reliability. Prior-art lifetime analysis in PV inverters has not yet investigated the impact of PV panel degradations. This paper thus evaluates the lifetime of PV inverters considering panel degrada...

  4. Dynamic Analysis of Offshore Oil Pipe Installation Using the Absolute Nodal Coordinate Formulation

    DEFF Research Database (Denmark)

    Nielsen, Jimmy D; Madsen, Søren B; Hyldahl, Per Christian

    2013-01-01

    The Absolute Nodal Coordinate Formulation (ANCF) has shown promising results in dynamic analysis of structures that undergo large deformation. The method relaxes the assumption of infinitesimal rotations. Being based in a fixed inertial reference frame leads to a constant mass matrix and zero......, are included to mimic the external forces acting on the pipe during installation. The scope of this investigation is to demonstrate the ability using the ANCF to analyze the dynamic behavior of an offshore oil pipe during installation...

  5. Evaluation of family drawings of physically and sexually abused children.

    Science.gov (United States)

    Piperno, Francesca; Di Biasi, Stefania; Levi, Gabriel

    2007-09-01

    The aim of this study is to analyse the family drawings of two groups of physically and/or sexually abused children as compared to the drawings of non-abused children of a matched control group. The drawings by 12 physically abused, 12 sexually abused and 12 non-abused children, all aged between 5 years-old and 10 years-old, were assessed and compared. Family drawings were analysed using a specific Screening Inventory (FDI-Family Drawing Inventory). This Inventory takes into consideration such qualitative and quantitative variables as the quality of drawing, the children's perception of their family members and their own perception of themselves within the family system. The results have shown significant differences between the abused minors and the control group. Abused children are more likely to draw distorted bodies, the human figure is usually represented devoid of details, their drawings generally show clear signals of trauma and the majority of the abused children are likely to exclude their primary caregiver from the drawings. The "drawings of the family" of physically and/or sexually abused children significantly evidence a greater emotional distress then the drawings of the non-abused children of the matched control group.

  6. Comparison of the neural basis for imagined writing and drawing.

    Science.gov (United States)

    Harrington, Greg S; Farias, Dana; Davis, Christine H; Buonocore, Michael H

    2007-05-01

    Drawing and writing are complex processes that require the synchronization of cognition, language, and perceptual-motor skills. Drawing and writing have both been utilized in the treatment of aphasia to improve communication. Recent research suggests that the act of drawing an object facilitated naming, whereas writing the word diminished accurate naming in individuals with aphasia. However, the relationship between object drawing and subsequent phonological output is unclear. Although the right hemisphere is characteristically mute, there is evidence from split-brain research that the right hemisphere can integrate pictures and words, likely via a semantic network. We hypothesized that drawing activates right hemispheric and left perilesional regions that are spared in aphasic individuals and may contribute to semantic activation that supports naming. Eleven right-handed subjects participated in a functional MRI (fMRI) experiment involving imagined drawing and writing and 6 of the 11 subjects participated in a second fMRI experiment involving actual writing and drawing. Drawing and writing produced very similar group activation maps including activation bilaterally in the premotor, inferior frontal, posterior inferior temporal, and parietal areas. The comparison of drawing vs. writing revealed significant differences between the conditions in areas of the brain known for language processing. The direct comparison between drawing and writing revealed greater right hemisphere activation for drawing in language areas such as Brodmann area (BA) 46 and BA 37.

  7. Brief report: human figure drawings by children with Asperger's syndrome.

    Science.gov (United States)

    Lim, Hui Keow; Slaughter, Virginia

    2008-05-01

    Twenty-nine children with Asperger's syndrome and 28 typically developing children, matched on gender, chronological age and nonverbal IQ, were asked to produce a free drawing, then requested to draw a person, a house and a tree. The drawings were scored using standardized procedures for assessing accuracy, detail and complexity. There were no differences between the diagnostic groups on the tree or house drawing scores. The human figure drawing scores of children with Asperger's syndrome were significantly lower than those of the typically developing children, and there was a positive correlation between human figure drawing scores and communication sub-scores on the Vineland Adaptive Behaviour Scales, for the Asperger's group. These results suggest that the selective deficit in generating human figure representations may derive from a relative lack of interest in the social world, and/or limited practice in drawing people.

  8. Impact of manual preference on directionality in children's drawings.

    Science.gov (United States)

    Picard, Delphine

    2011-01-01

    The effects of handedness on directionality in drawing are already well documented in the literature, at least as far as adults are concerned. The present study investigates the impact of manual preference on directionality as seen in the drawing product and drawing process, from a developmental point of view. A total of 120 children aged 5 to 9, both right and left-handed drawers, volunteered for the study. Children were asked to draw twice from memory a set of six common objects. Results indicate that directionality in drawing product varies significantly according to manual preference in the 9-year-old children, but not in the younger age groups. The concomitant increase between 7 and 9 years of age in the use of preferred stroke directions and the impact of manual preference in the drawing process suggests that biomechanical factors might play an important role in behavioural asymmetries in drawing.

  9. Accessible engineering drawings for visually impaired machine operators.

    Science.gov (United States)

    Ramteke, Deepak; Kansal, Gayatri; Madhab, Benu

    2014-01-01

    An engineering drawing provides manufacturing information to a machine operator. An operator plans and executes machining operations based on this information. A visually impaired (VI) operator does not have direct access to the drawings. Drawing information is provided to them verbally or by using sample parts. Both methods have limitations that affect the quality of output. Use of engineering drawings is a standard practice for every industry; this hampers employment of a VI operator. Accessible engineering drawings are required to increase both independence, as well as, employability of VI operators. Today, Computer Aided Design (CAD) software is used for making engineering drawings, which are saved in CAD files. Required information is extracted from the CAD files and converted into Braille or voice. The authors of this article propose a method to make engineering drawings information directly accessible to a VI operator.

  10. Investigation And Mitigation Techniques Of Power Quality Problems In Nuclear Installations

    International Nuclear Information System (INIS)

    Ayad, N.; Elsherbiny, E.; Eleissawi, H.; Zaher, M.; AbdelSalam, G.

    2013-01-01

    The electrical power systems are exposed to different types of power quality disturbances problems. Investigation and monitoring of power quality is necessary to maintain accurate operation of sensitive equipment especially for nuclear installations. The present research discusses investigation and monitoring of power quality problems for the electrical sources of nuclear installations. Field power quality data is collected by power analyzer and analyzed with reference to power quality standards. There were several disturbances exceeded the thresholds, they were voltage harmonics and voltage flicker. Mitigation techniques were suggested to install a passive filter at low voltage side and all sensitive and critical loads should be isolated and fed through uninterruptible power supply (UPS)

  11. Skepticism and Denial: Drawing a line

    Science.gov (United States)

    Byrne, J. M.; Brown, M. B.; Peacock, K.

    2016-12-01

    Climate denialism is distinct from a merely skeptical attitude towards generally accepted views in climate science. But drawing the line between them takes care—there are similarities between skepticism and denial, including a shared reluctance to accept conclusions that nearly all qualified scientists take to be well-justified. Here we will explore both how to draw the line, and how to effectively communicate the differences between denial and skepticism. Identifying which of these two terms best describes someone's attitude turns on whether they reject a generally accepted view based on a `high threshold' for acceptance of conclusions in general, or from a preference that the conclusion in question be false. In most cases, denialism manifests in disregard and mistreatment of evidence, including selective quotation, credulous endorsement of bad sources and incredulous rejection of good sources. Historically, current accepted views became dominant as alternatives were excluded and arguments supporting current views accumulated. The accumulated record of evidence and successful application of those views sets a high bar for proposed alternatives to them. Pure skeptics may refuse to endorse generally accepted views without rejecting or distorting the strong evidence for those views, and typically support policy responses based on the implications of that evidence. But deniers who reject scientific conclusions reject the evidence for those views while endorsing views that a true skeptic would regard as less plausible and well-supported than the accepted views. Thus motivated cognition is the key to defining denial. Pascal's famous argument for belief in God illustrates the problem: even assuming God's existence to be extremely improbable, the expected value of believing is far higher than the expected value of disbelieving. But Pascal's argument undermines its own methodology: without reasons to rely on beliefs as reliable guides to successful action, cost

  12. 49 CFR 393.30 - Battery installation.

    Science.gov (United States)

    2010-10-01

    ... NECESSARY FOR SAFE OPERATION Lamps, Reflective Devices, and Electrical Wiring § 393.30 Battery installation... 49 Transportation 5 2010-10-01 2010-10-01 false Battery installation. 393.30 Section 393.30 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY...

  13. Installation package for the Solaron solar subsystem

    Science.gov (United States)

    1979-01-01

    Information that is intended to be a guide for installation, operation, and maintenance of the various solar subsystems is presented. The subsystems consist of the following: collectors, storage, transport (air handler) and controller for heat pump and peak storage. Two prototype residential systems were installed at Akron, Ohio, and Duffield, Virginia.

  14. Data Acquisition System On Beta Installation

    International Nuclear Information System (INIS)

    Abtokhi, Ahmad; Nurhanan; Sudarno; Sumarno, Edy

    2000-01-01

    Data acquisition system is needed on every installation. This is important used to monitoring and processing data to get information desired. This system applied to β installation which is facility to carry out experiments on accident condition like as reflooding phenomena in test section. The 16 exp.th channel data acquisition system is drived by ADC 0804 and programme application DELPHI

  15. ATLAS semiconductor tracker installed into its barrel

    CERN Multimedia

    Maximilien Brice

    2005-01-01

    The ATLAS silicon tracker is installed in the silicon tracker barrel. Absolute precision was required in this operation to ensure that the tracker was inserted without damage through minimal clearance. The installation was performed in a clean room on the CERN site so that no impurities in the air would contaminate the tracker's systems.

  16. Demographic characteristics of nuclear installations sites

    International Nuclear Information System (INIS)

    Doumenc, A.; Faure, J.

    1988-01-01

    The selection of a nuclear installations sites can not be conceived without a deep analysis of demographic context. This analysis permits to define the critical populations around the installation and is an essential element of emergency plans. 1 tab., 2 refs. (F.M.)

  17. Using game engines in mixed reality installations

    NARCIS (Netherlands)

    Nakevska, M.; Vos, E.C.; Juarez, Alex; Hu, J.; Langereis, G.R.; Rauterberg, G.W.M.; Anacleto, J.; Fels, S.; Graham, N.; et al., xx

    2011-01-01

    In a mixed reality installation, a variety of technologies is integrated such as virtual reality, augmented reality, and animated virtual agents and robotic agents. One of the main challenges is how to design and implement a mixed reality installation that integrates a heterogeneous array of sensors

  18. Installed water resource modelling systems for catchment ...

    African Journals Online (AJOL)

    Following international trends there are a growing number of modelling systems being installed for integrated water resource management, in Southern Africa. Such systems are likely to be installed for operational use in ongoing learning, research, strategic planning and consensus-building amongst stakeholders in the ...

  19. Installation Service - Changes in opening hours

    CERN Multimedia

    GS Department

    2010-01-01

    For organizational matters, please note that, as from 15 March 2010, the Installation Service will have wen opening hours. The new schedule will be from 14:00 to 17:00 (Monday to Friday). Contact persons are: Martine Briant, Karine Robert and Claudia Bruggmann. The office address remains 73-3-014. Installation Service

  20. Public perception of nuclear installations

    International Nuclear Information System (INIS)

    Kiipper, Felipe de Moura

    2011-01-01

    The key for nuclear renaissance is public acceptance. Facing energetic needs that occur around the world and lack of resources, the work of characterizing and proposing new models to represent public opinion is extremely important to all stakeholders. Even though public opinion's study on risks is relatively recent, may approaches of this subject have been suggested and presented, especially for the topic of perceptions on nuclear installations. Actual definitions on risk exist between objective and subjective models, that reflect opinions of lay public and experts. Strategies on communications with the public may be evaluated from many developed models, and its results may be registered. The use of structural models may present an exploratory character as well as confirmatory theories, as an adequate tool for the development of studies on public perception. In this work, a structural model is presented from data obtained in a previous report, and added to data collected before and after the Fukushima nuclear accident, in Japan. The effects developed from this accident offered a unique opportunity to study public opinion through the effects of a serious nuclear accident and its effects on risk communications. Aside, this work attempted to check the structural model according with obtained results, in order to sustain a constant improvement of the working tools. Yet, a comparison between data according to experts' respondents and lay public ones as well as a comparison among different students before and after a visit to nuclear station is considered. Obtained data for the structural models has been applied for on a structural model and analyzed by structural correlation matrix, latent variable structural coefficients and R 2 values. Results indicate that public opinion maintains its rejection on nuclear energy and the perception of benefits, facing perceived risks before the accident, has diminished. A new model that included a latent variable for corresponding

  1. Drawing-to-Learn: A Framework for Using Drawings to Promote Model-Based Reasoning in Biology

    Science.gov (United States)

    Quillin, Kim; Thomas, Stephen

    2015-01-01

    The drawing of visual representations is important for learners and scientists alike, such as the drawing of models to enable visual model-based reasoning. Yet few biology instructors recognize drawing as a teachable science process skill, as reflected by its absence in the Vision and Change report’s Modeling and Simulation core competency. Further, the diffuse research on drawing can be difficult to access, synthesize, and apply to classroom practice. We have created a framework of drawing-to-learn that defines drawing, categorizes the reasons for using drawing in the biology classroom, and outlines a number of interventions that can help instructors create an environment conducive to student drawing in general and visual model-based reasoning in particular. The suggested interventions are organized to address elements of affect, visual literacy, and visual model-based reasoning, with specific examples cited for each. Further, a Blooming tool for drawing exercises is provided, as are suggestions to help instructors address possible barriers to implementing and assessing drawing-to-learn in the classroom. Overall, the goal of the framework is to increase the visibility of drawing as a skill in biology and to promote the research and implementation of best practices. PMID:25713094

  2. Buckling of Bucket Foundations During Installation

    DEFF Research Database (Denmark)

    Madsen, Søren

    There is a great politically will to expand the green energy market in these times. A proven green technology is wind turbines. Wind turbines have been installed in great numbers on land over the last decades. However, the current development in wind turbine design leads to larger turbine sizes...... in order to reduce the cost of energy. This limits the on land application due to transportation limitations and unwillingness from prospect neighbours. Thus, offshore wind energy started developing over the last couple of years. Although installing the wind turbines offshore resolves the before men tioned...... issues, it brings up the cost of energy mainly due to increased installation and maintenance costs. A very large part—up to 30–50% using current technology—of the installation cost origins from the expenses related to the installation of foundations. A new foundation concept—the bucket foundation...

  3. Micro Wire-Drawing: Experiments And Modelling

    International Nuclear Information System (INIS)

    Berti, G. A.; Monti, M.; Bietresato, M.; D'Angelo, L.

    2007-01-01

    In the paper, the authors propose to adopt the micro wire-drawing as a key for investigating models of micro forming processes. The reasons of this choice arose in the fact that this process can be considered a quasi-stationary process where tribological conditions at the interface between the material and the die can be assumed to be constant during the whole deformation. Two different materials have been investigated: i) a low-carbon steel and, ii) a nonferrous metal (copper). The micro hardness and tensile tests performed on each drawn wire show a thin hardened layer (more evident then in macro wires) on the external surface of the wire and hardening decreases rapidly from the surface layer to the center. For the copper wire this effect is reduced and traditional material constitutive model seems to be adequate to predict experimentation. For the low-carbon steel a modified constitutive material model has been proposed and implemented in a FE code giving a better agreement with the experiments

  4. Spiritual Art: A Study of Illuminated Drawings

    Directory of Open Access Journals (Sweden)

    Fatemeh Kateb

    2017-12-01

    Full Text Available Illumination can be seen as a collection of exquisite and novel designs that painters and illumination-workers use to make religious, scientific, cultural, historical, and other collections of work beautiful. The professionals of illumination use these techniques in books to beautifully virtualize the golden pages of the eternal literature and the religious texts of their homeland. In this way, the sides and margins of the pages are decorated with designs of Islimi (arabesque branches, stems, flowers, and Cathay (Khataei leaves. Illuminations like paintings have various schools and periods, such as the Seljuk, Bukhara, Timurid, Safavid, Qajar schools, with further branches within each school. The illuminations of different periods represent the states and spirits of those eras. However, the illustrated paintings have been performed in the primary state in each school and era with some minor differences in colors and designs, and it can be said that the basis of the illustrated designs are three geometric shapes of the square, circle and triangle, and the combination of these three shapes. In this article, we try to study illumination drawings in terms of the spiritual dimension and its effect on the soul and psych. Furthermore; we will study the spiritual nature of the motifs in order to achieve a deeper understanding of the spirit of Islamic art.

  5. Deep Drawing Simulations With Different Polycrystalline Models

    Science.gov (United States)

    Duchêne, Laurent; de Montleau, Pierre; Bouvier, Salima; Habraken, Anne Marie

    2004-06-01

    The goal of this research is to study the anisotropic material behavior during forming processes, represented by both complex yield loci and kinematic-isotropic hardening models. A first part of this paper describes the main concepts of the `Stress-strain interpolation' model that has been implemented in the non-linear finite element code Lagamine. This model consists of a local description of the yield locus based on the texture of the material through the full constraints Taylor's model. The texture evolution due to plastic deformations is computed throughout the FEM simulations. This `local yield locus' approach was initially linked to the classical isotropic Swift hardening law. Recently, a more complex hardening model was implemented: the physically-based microstructural model of Teodosiu. It takes into account intergranular heterogeneity due to the evolution of dislocation structures, that affects isotropic and kinematic hardening. The influence of the hardening model is compared to the influence of the texture evolution thanks to deep drawing simulations.

  6. Exploration of polyelectrolytes as draw solutes in forward osmosis processes

    KAUST Repository

    Ge, Qingchun

    2012-03-01

    The development of the forward osmosis (FO) process has been constrained by the slow development of appropriate draw solutions. Two significant concerns related to draw solutions are the draw solute leakage and intensiveenergy requirement in recycling draw solutes after the FO process. FO would be much attractive if there is no draw solute leakage and the recycle of draw solutes is easy and economic. In this study, polyelectrolytes of a series of polyacrylic acid sodium salts (PAA-Na), were explored as draw solutes in the FO process. The characteristics of high solubility in water and flexibility in structural configuration ensure the suitability of PAA-Na as draw solutes and their relative ease in recycle through pressure-driven membrane processes. The high water flux with insignificant salt leakage in the FO process and the high salt rejection in recycle processes reveal the superiority of PAA-Na to conventional ionic salts, such as NaCl, when comparing their FO performance via the same membranes. The repeatable performance of PAA-Na after recycle indicates the absence of any aggregation problems. The overall performance demonstrates that polyelectrolytes of PAA-Na series are promising as draw solutes, and the new concept of using polyelectrolytes as draw solutes in FO processes is applicable. © 2011 Elsevier Ltd.

  7. Installation and alignment of the DAΦNE accelerators

    International Nuclear Information System (INIS)

    Biscari, C.; Sgamma, F.

    1998-01-01

    Installation, alignment and survey of the magnetic elements and vacuum chambers of DAΦNE are described. The networks of the Damping Ring and two Main Rings are described, focusing the techniques chosen to obtain the required precision. A description of the mechanical measurements, coupled to the magnetic ones, to refer the magnetic axis of quadrupoles and sextupoles to their fiducial is underlined: emPHIasis is put on the strategy to couple precision with quickness. The results of first PHIase alignment job and its refinement are analyzed using the orbit measurement

  8. Investigate earing of TWIP steel sheet during deep-drawing process by using crystal plasticity constitutive model

    Directory of Open Access Journals (Sweden)

    Yang J.

    2015-01-01

    Full Text Available By combining the nonlinear finite element analysis techniques and crystal plasticity theory, the macroscopic mechanical behaviour of crystalline material, the texture evolution and earing-type characteristics are simulated accurately. In this work, a crystal plasticity model exhibiting deformation twinning is introduced based on crystal plasticity theory and saturation-type hardening laws for FCC metal Fe-22Mn-0.6C TWIP steel. Based on the CPFE model and parameters which have been determined for TWIP steel, a simplified finite element model for deep drawing is promoted by using crystal plasticity constitutive model. The earing characteristics in typical deep-drawing process are simulated well. Further, the drawing forces are calculated and compared to the experimental results from reference. Meanwhile, the impacts of drawing coefficient and initial texture on the earing characteristics are investigated for controlling the earing.

  9. Standard Reference Tables -

    Data.gov (United States)

    Department of Transportation — The Standard Reference Tables (SRT) provide consistent reference data for the various applications that support Flight Standards Service (AFS) business processes and...

  10. Use of software to optimize time and costs in the elaboration of the basic drawing

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Tchaikowisky M. [Faculdade de Tecnologia e Ciencias (FTC), Itabuna, BA (Brazil); Bresci, Claudio T.; Franca, Carlos M.M. [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    In order to choose areas to implement pipe yards, terminals, campsite, pipeline path and other areas of assistance for the construction and assembly of the pipeline, it is necessary previous location studies to elaborate the basic drawing. However it is not always possible to contract a company registered in aerial survey to elaborate this type of drawing, either for the cost or time, and where the lack of a basic drawing can lead to an erroneous choice or one which reflects an exaggerated estimate or not adequate logistics. In order to minimize costs and optimizing time, without compromising quality, this study proposes the use of software 'virtual globe' type for mapping and geographic location available on the internet to assist in the gathering of geographical, altimetric, hydro graphic, road, environmental, socioeconomic and aerial images, information necessary to elaborate the basic drawing. This article includes a case study of the oil pipeline Cacimbas-Barra do Riacho project and a proposed procedure to be used in the elaboration of basic drawings using data generated using the referred to software. In 2007 the Pipeline Construction and Assembly sector, CMDPI unit of PETROBRAS Engenharia/IETEG/IEDT was designated to select an area of 2 hectares where the pipe storage yard for pipes to be used in the Oil Pipeline Cacimbas- Barra do Riacho in Espirito Santo state would be constructed. The area was chosen following some pre-requisites and using as main resources in the gathering of information necessary to select the area, 'virtual globe' type software and a CAD type software with the capacity to import images and altimetric identification as well as exporting drawing data to the mentioned. The activity, much simpler than hiring an aerial survey, was elaborated surpassing expectations of time-costs besides complying with the necessary technical demands. (author)

  11. Iodine filters in nuclear installations

    International Nuclear Information System (INIS)

    Wilhelm, J.G.

    1982-01-01

    The present report discusses the significance for environmental exposure of the iodine released with the gaseous effluents of nuclear power stations and reprocessing plants in relation to releases of other airborne radionuclides. Iodine filtration processes are described. The release pathways and the composition of airborne fission product iodine mixtures and their bearing on environmental exposure are discussed on the basis of measured fission product iodine emissions. The sorbents which can be used for iodine filtration, their removal efficiencies and range of applications are dealt with in detail. The particular conditions governing iodine removal, which are determined by the various gaseous iodine species, are illustrated on the basis of experimentally determined retention profiles. Particular attention is given to the limitations imposed by temperature, humidity, radiation and filter poisoning. The types of filter normally used are described, their advantages and drawbacks discussed, the principles underlying their design are outlined and the sources of error indicated. The methods normally applied to test the efficiency of various iodine sorbents are described and assessed. Operating experience with iodine filters, gathered from surveillance periods of many years, is supplemented by a large number of test results and the findings of extensive experiments. Possible ways of prolonging the permissible service lives of iodine filters are discussed and information is given on protective measures. The various iodine removal processes applied in reprocessing plants are described and compared with reference to efficiency and cost. The latest developments in filter technology in reprocessing plants are briefly outlined

  12. Planning of installations in prefabricated buildings

    Directory of Open Access Journals (Sweden)

    Stanojević Ana D.

    2014-01-01

    Full Text Available Planning installations is becoming an increasing problem in construction, because the number of devices for technical supply is constantly increasing with continual progress in science and technology. Since the installations of the building can not be viewed unrelated of the construction, problem of its planning is more complicated in prefabricated buildings because the elements of construction are prefabricated. Planning was formerly performed by embedding the installation in prefabricated elements. This method had a lot of flaws, and modern approach tends setting installation out of prefabricated elements except when the traditional approach proves as economical. Although the hot water heating with radiators is the most practical way of heating in prefabricated buildings, the under floor heating systems have greater and greater use. Today, prefabricated sanitary cabins have a huge use and they are much more economical in comparison to special panels for bathrooms that were once create. Approaches in terms of planning electrical installation are different, but for conventional constructed buildings, as well as prefabricated buildings, the use of lightweight prefabricated walls with embedded installations, today is recommended, when the room is loaded with a large number of this installations and if it is possible.

  13. A novel method for coiled tubing installation

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, Peter J. [2H Offshore, Houston, TX (United States); Tibbetts, David [Aquactic Engineering and Construction Ltd., Aberdeen (United Kingdom)

    2009-12-19

    Installation of flexible pipe for offshore developments is costly due to the physical cost of the flexible pipe, expensive day rates and the availability of suitable installation vessels. Considering the scarcity of flexible pipe in today's increasingly demanding and busy market, operators are seeking a cost effective solution for installing piping in a range of water depths using vessels which are readily on hand. This paper describes a novel approach to installing reeled coiled tubing, from 1 inch to 5 inch diameter, from the back of a small vessel in water depths from 40 m up to around 1000 m. The uniqueness of the system is the fact that the equipment design is modular and compact. This means that when disassembled, it fits into standard 40 ft shipping containers, and the size allows it to be installed on even relatively small vessels of opportunity, such as anchor handling or installation vessels, from smaller, and cheaper quay side locations. Such an approach is the ideal solution to the problem faced by operators, in that it allows the installation of cheaper, readily available coiled tubing, from cost-effective vessels, which do not need to transit to a pick up the system. (author)

  14. Offshore Cable Installation - Lillgrund. Lillgrund Pilot Project

    Energy Technology Data Exchange (ETDEWEB)

    Unosson, Oscar [Vattenfall Vindkraft AB, Stockholm (Sweden)

    2009-01-15

    This report describes the installation method and the experiences gained during the installation of the submarine cables for the offshore wind farm at Lillgrund. The wind farm consists of 48 wind turbines and is expected to produce 0.33 TWh annually. Different aspects of the installation, such as techniques, co-operation between the installation teams, weather conditions and regulatory and environmental issues are described in this report. In addition, recommendations and guidelines are provided, which hopefully can be utilised in future offshore wind projects. The trenches, in which the submarine cables were laid, were excavated weeks before the cable laying. This installation technique proved to be successful for the laying of the inter array cables. The export cable, however, was laid into position with difficulty. The main reason why the laying of the export cable proved more challenging was due to practical difficulties connected with the barge entrusted with the cable laying, Nautilus Maxi. The barge ran aground a number of times and it had difficulties with the thrusters, which made it impossible to manoeuvre. When laying the inter array cables, the method specification was closely followed, and the laying of the cables was executed successfully. The knowledge and experience gained from the offshore cable installation in Lillgrund is essential when writing technical specifications for new wind plant projects. It is recommended to avoid offshore cable installation work in winter seasons. That will lower the chances of dealing with bad weather and, in turn, will reduce the risks

  15. Machines and Signs A History of the Drawing of Machines

    CERN Document Server

    Rovida, Edoardo

    2013-01-01

    This volume addresses the cultural, technical and ethical motivations of the history of drawing of machines and its developments step by step. First it treats drawings without any technical character; then the Renaissance with its new forms of drawing; the 18th century, with orthographic projections, immediately used by industry; the 19th century, including the applications of drawing in industry; and the 20th century, with the standardization institutions and the use of the computer. The role of historical drawings and archives in modern design is also examined. This book is of value to all those who are interested in technical drawing, either from an artistic, from a design, or from an engineering point of view.

  16. Preschool Drawing and School Mathematics: The Nature of the Association.

    Science.gov (United States)

    Malanchini, Margherita; Tosto, Maria G; Garfield, Victoria; Dirik, Aysegul; Czerwik, Adrian; Arden, Rosalind; Malykh, Sergey; Kovas, Yulia

    2016-05-01

    The study examined the etiology of individual differences in early drawing and of its longitudinal association with school mathematics. Participants (N = 14,760), members of the Twins Early Development Study, were assessed on their ability to draw a human figure, including number of features, symmetry, and proportionality. Human figure drawing was moderately stable across 6 months (average r = .40). Individual differences in drawing at age 4½ were influenced by genetic (.21), shared environmental (.30), and nonshared environmental (.49) factors. Drawing was related to later (age 12) mathematical ability (average r = .24). This association was explained by genetic and shared environmental factors that also influenced general intelligence. Some genetic factors, unrelated to intelligence, also contributed to individual differences in drawing. © 2016 The Authors. Child Development © 2016 Society for Research in Child Development, Inc.

  17. Preschool Drawing and School Mathematics: The Nature of the Association

    Science.gov (United States)

    Malanchini, M.; Tosto, M.G.; Garfield, V.; Czerwik, A.; Dirik, A.; Arden, R.; Malykh, S.

    2016-01-01

    The study examined the aetiology of individual differences in early drawing and of its longitudinal association with school mathematics. Participants (N = 14,760), members of the Twins Early Development Study, were assessed on their ability to draw a human figure, including number of features, symmetry and proportionality. Human figure drawing was moderately stable across six months (average r = .40). Individual differences in drawing at age 4½ were influenced by genetic (.21), shared environmental (.30) and non-shared environmental (.49) factors. Drawing was related to later (age 12) mathematical ability (average r = .24). This association was explained by genetic and shared environmental factors that also influenced general intelligence. Some genetic factors, unrelated to intelligence, also contributed to individual differences in drawing. PMID:27079561

  18. Organigraphs: drawing how companies really work.

    Science.gov (United States)

    Mintzberg, H; Van der Heyden, L

    1999-01-01

    Walk into any organization and you will get a snapshot of the company in action--people and products moving every which way. But ask for a picture of the company and you will be given the org chart, with its orderly little boxes showing just the names and titles of managers. Now there's a more revealing way to depict the people and operations within an organization--an approach called the organigraph. The organigraph is not a chart. It's a map that offers an overview of the company's functions and the ways that people organize themselves at work. Perhaps most important, an organigraph can help managers see untapped competitive opportunities. Drawing on the organigraphs they created for about a dozen companies, authors Mintzberg and Van der Heyden illustrate just how valuable a tool the organigraph is. For instance, one they created for Electrocomponents, a British distributor of electrical and mechanical items, led managers to a better understanding of the company's real expertise--business-to-business relationships. As a result of that insight, the company wisely decided to expand in Asia and to increase its Internet business. As one manager says, "It allowed the company to see all sorts of new possibilities." With traditional hierarchies vanishing and newfangled--and often quite complex--organizational forms taking their place, people are struggling to understand how their companies work. What parts connect to one another? How should processes and people come together? Whose ideas have to flow where? With their flexibility and realism, organigraphs give managers a new way to answer those questions.

  19. Improvement of cold wire drawing process by electropulsing

    OpenAIRE

    Sánchez Egea, Antonio José; González Rojas, Hernan Alberto; Jorba Peiró, Jordi

    2015-01-01

    The electroplastic effects on wire drawing process assisted with different short time current pulses configurations are investigated experimentally. The current pulses were induced to a specimen during the drawing process. The studied material is the 308L stainless steel. Current densities of 185 A/mm2, frequencies range from 140 to 350 Hz and pulse duration range from 100 to 250 μs were used in the electrically‐assisted wire drawing process. Frequency and pulse duration are...

  20. Drawing on student knowledge of neuroanatomy and neurophysiology.

    Science.gov (United States)

    Slominski, Tara N; Momsen, Jennifer L; Montplaisir, Lisa M

    2017-06-01

    Drawings are an underutilized assessment format in Human Anatomy and Physiology (HA&P), despite their potential to reveal student content understanding and alternative conceptions. This study used student-generated drawings to explore student knowledge in a HA&P course. The drawing tasks in this study focused on chemical synapses between neurons, an abstract concept in HA&P. Using two preinstruction drawing tasks, students were asked to depict synaptic transmission and summation. In response to the first drawing task, 20% of students ( n = 352) created accurate representations of neuron anatomy. The remaining students created drawings suggesting an inaccurate or incomplete understanding of synaptic transmission. Of the 208 inaccurate student-generated drawings, 21% depicted the neurons as touching. When asked to illustrate summation, only 10 students (roughly 4%) were able to produce an accurate drawing. Overall, students were more successful at drawing anatomy (synapse) than physiology (summation) before formal instruction. The common errors observed in student-generated drawings indicate students do not enter the classroom as blank slates. The error of "touching" neurons in a chemical synapse suggests that students may be using intuitive or experiential knowledge when reasoning about physiological concepts. These results 1 ) support the utility of drawing tasks as a tool to reveal student content knowledge about neuroanatomy and neurophysiology; and 2 ) suggest students enter the classroom with better knowledge of anatomy than physiology. Collectively, the findings from this study inform both practitioners and researchers about the prevalence and nature of student difficulties in HA&P, while also demonstrating the utility of drawing in revealing student knowledge. Copyright © 2017 the American Physiological Society.

  1. Drawings of fossils by Robert Hooke and Richard Waller

    Science.gov (United States)

    Kusukawa, Sachiko

    2013-01-01

    The drawings of fossils by Robert Hooke and Richard Waller that were the basis of the engravings in Hooke's Posthumous works (1705) are published here for the first time. The drawings show that both Hooke and Waller were proficient draftsmen with a keen eye for the details of petrified objects. These drawings provided Hooke with a polemic edge in making the case for the organic origins of ‘figured stones’.

  2. Installation of a tandem-type accelerator mass spectrometer

    International Nuclear Information System (INIS)

    Mizushima, Toshihiko; Togawa, Orihiko; Mizutani, Yoshihiko; Yamamoto, Tadatoshi

    2000-02-01

    Tandem-type accelerator mass spectrometer (hereinafter referred to as Tandetron) was installed at the Ominato Facility of Mutsu Establishment, JAERI in April, 1997. The objective of its installation is to investigate the mechanism of the mixing and circulation of seawater in the ocean, by collecting seawater samples around Japan and analyzing the horizontal and vertical distributions of 14 C contained in the samples. The Tandetron consists of two lines to measure isotopic ratios of carbon and those of heavier iodine. The adjustment for the carbon line was finished and the measurements of seawater samples were started. The iodine line, on the other hand, is on the final step of its adjustment and performance tests are being carried out with a TOF (Time of Flight) detector. The iodine line will be used to analyze 129 I released from a spent nuclear fuel reprocessing plant and other nuclear facilities. In this report, we summarize the status of installation of the carbon and iodine lines for the Tandetron. The report describes the situations of their adjustments until now, the outline of the Tandetron, tests of measurement performance, evaluation and inspection of shielding performance, problems and their solutions, and so on. (author)

  3. Structural considerations for solar installers : an approach for small, simplified solar installations or retrofits.

    Energy Technology Data Exchange (ETDEWEB)

    Richards, Elizabeth H.; Schindel, Kay (City of Madison, WI); Bosiljevac, Tom; Dwyer, Stephen F.; Lindau, William (Lindau Companies, Inc., Hudson, WI); Harper, Alan (City of Madison, WI)

    2011-12-01

    Structural Considerations for Solar Installers provides a comprehensive outline of structural considerations associated with simplified solar installations and recommends a set of best practices installers can follow when assessing such considerations. Information in the manual comes from engineering and solar experts as well as case studies. The objectives of the manual are to ensure safety and structural durability for rooftop solar installations and to potentially accelerate the permitting process by identifying and remedying structural issues prior to installation. The purpose of this document is to provide tools and guidelines for installers to help ensure that residential photovoltaic (PV) power systems are properly specified and installed with respect to the continuing structural integrity of the building.

  4. Seismic studies for nuclear installations sites

    International Nuclear Information System (INIS)

    Mohammadioun, B.; Faure, J.

    1988-01-01

    The french experience in seismic risks assessment for french nuclear installations permits to set out the objectives, the phases the geographic extensions of workings to be realized for the installation safety. The data to be collected for the safety analysis are specified, they concern the regional seismotectonics, the essential seismic data for determining the seism level to be taken into account and defining the soil movement spectra adapted to the site. It is necessary to follow up the seismic surveillance during the installation construction and life. 7 refs. (F.M.)

  5. Installation for producing sealed radioactive sources

    International Nuclear Information System (INIS)

    Fradin, J.; Hayoun, C.

    1969-01-01

    This installation has been designed and built for producing sealed sources of fission elements: caesium 137, strontium 90, promethium 147, ruthenium 106 and cerium 144 in particular. The installation consists of sealed and protected cells, each being assigned to a particular production. The safety and the operational reliability of the equipment are the principal considerations which have governed this work. The report describes the installation and, in particular, the apparatus used as well as the various control devices. In conclusion, a review as presented of six years operation. (authors) [fr

  6. Traceable calibration of photovoltaic reference cells using natural sunlight

    Science.gov (United States)

    Müllejans, H.; Zaaiman, W.; Pavanello, D.; Dunlop, E. D.

    2018-02-01

    At the European Solar Test Installation (ESTI) photovoltaic (PV) reference cells are calibrated traceably to SI units via the World Radiometric Reference (WRR) using natural sunlight. The Direct Sunlight Method (DSM) is described in detail and the latest measurement results and an updated uncertainty budget are reported. These PV reference cells then provide a practical means for measuring the irradiance of natural or simulated sunlight during the calibration of other PV devices.

  7. [Listening to children through drawings in transcultural consultations].

    Science.gov (United States)

    Rizzi, Alice Titia; Bouaziz, Nora; Moro, Marie Rose

    2014-01-01

    The transcultural consultation is a form of group therapy which is aimed at families from other countries, using a method which enables children, through drawing, to express themselves in a group. The favoured means of communication for children, drawing is an effective way of liberatingthoughts and giving meaning to family history. Incorporated into the overall narrative, it can thereby be a form of mediation, on condition that it is integrated into the therapeutic programme. This article reflects on the characteristics of the drawings produced by these children who have different cultures and different ways of drawing.

  8. The neural basis for simulated drawing and the semantic implications.

    Science.gov (United States)

    Harrington, Greg S; Farias, Dana; Davis, Christine H

    2009-03-01

    This functional magnetic resonance imaging (fMRI) study of the mental simulation of drawing (1) investigated the neural substrates of drawing and (2) delineated the semantic aspects of drawing. The goal was to advance our understanding of how drawing a familiar object is linked to lexical semantics and therefore a viable method to use to rehabilitate aphasia. We hypothesized that the semantic aspects of drawing familiar objects compared to drawing non-objects would yield greater activation in the inferior temporal cortex and the inferior frontal cortex of the left hemisphere. To test this hypothesis, eight right-handed subjects performed an fMRI experiment that directly contrasted drawing familiar objects to non-objects using mental imagery. Simulated drawing recruited a large, distributed network of frontal, parietal, and temporal structures. In the contrast comparing drawing familiar objects to non-objects there was stronger activation in the left hemisphere within the inferior temporal, anterior inferior frontal, inferior parietal and superior frontal cortices. The activation within the inferior temporal cortex was associated with visual semantic processing and semantic mediated naming. We suggest that the anterior inferior frontal activation is linked to the inferior temporal cortex and is involved in the selection of specific semantic features of the object as well as retrieval of information regarding the perceptual aspects of the object.

  9. Experimental study on titanium wire drawing with ultrasonic vibration.

    Science.gov (United States)

    Liu, Shen; Shan, Xiaobiao; Guo, Kai; Yang, Yuancai; Xie, Tao

    2018-02-01

    Titanium and its alloys have been widely used in aerospace and biomedical industries, however, they are classified as difficult-to-machine materials. In this paper, ultrasonic vibration is imposed on the die to overcome the difficulties during conventional titanium wire drawing processes at the room temperature. Numerical simulations were performed to investigate the variation of axial stress within the contacting region and study the change of the drawing stress with several factors in terms of the longitudinal amplitude and frequency of the applied ultrasonic vibration, the diameter reduction ratio, and the drawing force. An experimental testing equipment was established to measure the drawing torque and rotational velocity of the coiler drum during the wire drawing process. The result indicates the drawing force increases with the growth of the drawing velocity and the reduction ratio, whether with or without vibrations. Application of either form of ultrasonic vibrations contributes to the further decrease of the drawing force, especially the longitudinal vibration with larger amplitude. SEM was employed to detect the surface morphology of the processed wires drawn under the three circumstances. The surface quality of the drawn wires with ultrasonic vibrations was apparently improved compared with those using conventional method. In addition, the longitudinal and torsional composite vibration was more effective for surface quality improvement than pure longitudinal vibration, however, at the cost of weakened drawing force reduction effect. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Drawing Disorders in Alzheimer's Disease and Other Forms of Dementia.

    Science.gov (United States)

    Trojano, Luigi; Gainotti, Guido

    2016-04-21

    Drawing is a multicomponential process that can be impaired by many kinds of brain lesions. Drawing disorders are very common in Alzheimer's disease and other forms of dementia, and can provide clinical information for the distinction of the different dementing diseases. In our review we started from an overview of the neural and cognitive bases of drawing, and from a recollection of the drawing tasks more frequently used for assessing individuals with dementia. Then, we analyzed drawing disorders in dementia, paying special attention to those observed in Alzheimer's disease, from the prodromal stages of the amnesic mild cognitive impairment to the stages of full-blown dementia, both in the sporadic forms with late onset in the entorhino-hippocampal structures and in those with early onset in the posterior neocortical structures. We reviewed the drawing features that could differentiate Alzheimer's disease from vascular dementia and from the most frequent forms of degenerative dementia, namely frontotemporal dementia and Lewy body disease. Finally, we examined some peculiar aspects of drawing disorders in dementia, such as perseverations, rotations, and closing-in. We argue that a careful analysis of drawing errors helps to differentiate the different forms of dementia more than overall accuracy in drawing.

  11. RF accelerating unit installed in the PSB

    CERN Multimedia

    CERN PhotoLab

    1972-01-01

    RF accelerating unit installed in the PSB ring between two bending magnets. Cool air from a heat exchanger is injected into the four cavities from the central feeder and the hot air recirculated via the lateral ducts.

  12. Installation of the LHC transfer lines begins

    CERN Multimedia

    Patrice Loïez

    2003-01-01

    The first of 700 magnets has been installed in one of the two transfer tunnels built to transfer the SPS beam into the LHC. The start of this first installation phase of the LHC transfer lines provides the opportunity to launch a new and highly original modular system for transporting and installing all kinds of magnets in very narrow tunnels. The system is based on very compact bogies, up to four of which can be coupled together to form a convoy. The wheels are fitted with individual motors enabling them to swivel through an angle of 90° and the convoy to move laterally. In this way the magnet is delivered directly to its installation point, but beneath the beamline. It is then raised into its final position in the beamline using air cushions, which form an integrated part of the transport system. Here we see the transport vehicle alongside the magnet supports. Visible in the background is the first magnet in place.

  13. Decommissioning and dismantling of nuclear installations

    International Nuclear Information System (INIS)

    Pelzer, N.

    1993-01-01

    The German law governing decommissioning and dismantling of nuclear installations can be called to be embryonic as compared to other areas of the nuclear regulatory system, and this is why the AIDN/INLA regional meeting organised by the German national committee in July 1992 in Schwerin has been intended to elaborate an assessment of the current legal situation and on this basis establish proposals for enhancement and development, taking into account the experience reported by experts from abroad. The proceedings comprise the paper of the opening session, 'Engineering and safety aspects of the decommissioning of nuclear installations', and the papers and discussions of the technical sessions entitled: - Comparative assessment of the regulatory regimes. - Legislation governing the decommissioning of nuclear installations in Germany. - Analysis of the purpose and law making substance of existing regulatory provisions for the decommissioning of nuclear installations. All seventeen papers of the meeting have been prepared for separate retrieval from the database. (orig./HSCH) [de

  14. Culture safety in the nuclear installation

    International Nuclear Information System (INIS)

    Benar Bukit

    2008-01-01

    Culture safety is aimed to empower all the personnel to contribute and responsible to the installation safety where they work in. Culture safety is important as there were so many accidents happened due to the little attention given to the safety, take as examples of what happened in Three Mille Island installation (1979) and Chernobyl (1986). These remind us that human factor gives a significant contribution to the failure of operational system which influences the safety. Therefore, as one of institutions which has nuclear installation. National Nuclear Energy Agency must apply the culture safety to guarantee the safety operation of nuclear installation to protect the personnel, community and environment from the hazard of radioactive radiation. Culture safety has two main components. The first component under the management responsibility is a framework needed in an organisation. The second component is the personnel attitude in al/ levels to respond and optimize those framework. (author)

  15. Design, fabrication and installation of irradiation facilities

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yong Sung; Lee, C. Y.; Kim, J. Y.; Chi, D. Y.; Kim, S. H.; Ahn, S. H.; Kim, S. J.; Kim, J. K.; Yang, S. H.; Yang, S. Y.; Kim, H. R.; Kim, H.; Lee, K. H.; Lee, B. C.; Park, C.; Lee, C. T.; Cho, S. W.; Kwak, K. K.; Suk, H. C. [and others

    1997-07-01

    The principle contents of this project are to design, fabricate and install the steady-state fuel test loop and non-instrumented capsule in HANARO for nuclear technology development. This project will be completed in 1999, the basic and detail design, safety analysis, and procurement of main equipment for fuel test loop have been performed and also the piping in gallery and the support for IPS piping in reactor pool have been installed in 1994. In the area of non-instrumented capsule for material irradiation test, the fabrication of capsule has been completed. Procurement, fabrication and installation of the fuel test loop will be implemented continuously till 1999. As besides, as these irradiation facilities will be installed in HANARO, review of safety concern, discussion with KINS for licensing and safety analysis report has been submitted to KINS to get a license and review of HANARO interface have been performed respectively. (author). 39 refs., 28 tabs., 21 figs.

  16. Notes on LED Installations in Street Illumination

    Directory of Open Access Journals (Sweden)

    Elisabeta Spunei

    2014-09-01

    Full Text Available The paper presents a study made on choosing LED street lighting installations, such that the quality requirements for exterior artificial lighting are fulfilled. We analyze two types of LED street lighting installations from a technical point of view, together with lighting level and brightness values obtained during the measurements. Following on the field measurements, the lighting quality parameters are calculated, and, for the lighting installation with the best performance, optimal mounting suggestions are made. The optimal quality parameters are calculated by simulations using the Dialux software. The same software and the same light sources we also compute an optimal street lighting by determining the size of the installation that provides the best lighting parameter values.

  17. Radioelement gauges. Appliances intended for permanent installation

    International Nuclear Information System (INIS)

    1975-08-01

    The present norm defines for radioelement gauges intended for permanent installation: a classification of instruments and beam shutter devices; recommended construction techniques which satisfy health physics requirements; monitoring and test methods; information which must appear on the instruments [fr

  18. Design, fabrication and installation of irradiation facilities

    International Nuclear Information System (INIS)

    Kim, Yong Sung; Lee, C. Y.; Kim, J. Y.; Chi, D. Y.; Kim, S. H.; Ahn, S. H.; Kim, S. J.; Kim, J. K.; Yang, S. H.; Yang, S. Y.; Kim, H. R.; Kim, H.; Lee, K. H.; Lee, B. C.; Park, C.; Lee, C. T.; Cho, S. W.; Kwak, K. K.; Suk, H. C.

    1997-07-01

    The principle contents of this project are to design, fabricate and install the steady-state fuel test loop and non-instrumented capsule in HANARO for nuclear technology development. This project will be completed in 1999, the basic and detail design, safety analysis, and procurement of main equipment for fuel test loop have been performed and also the piping in gallery and the support for IPS piping in reactor pool have been installed in 1994. In the area of non-instrumented capsule for material irradiation test, the fabrication of capsule has been completed. Procurement, fabrication and installation of the fuel test loop will be implemented continuously till 1999. As besides, as these irradiation facilities will be installed in HANARO, review of safety concern, discussion with KINS for licensing and safety analysis report has been submitted to KINS to get a license and review of HANARO interface have been performed respectively. (author). 39 refs., 28 tabs., 21 figs

  19. Towards a Framework for Projection Installations

    DEFF Research Database (Denmark)

    Halskov, Kim; Falck, Hans William

    2013-01-01

    Projection installations are part of Spatially Augmented Reality, where the projection medium is used to enrich a fixed, bounded physical space with digital content. Projection technology enables us to turn many kinds of physical objects into displays. In this paper we develop and present...... a conceptual framework that addresses three aspects of a projection installation: the contentassociated with the object, the digital content, and the relation between the two. We conclude the paper with a set of strategies commonly used in projection installations: Enhancing or emphasizing physical aspects......; Transforming materiality; Adding virtual objects; 3D effects; Complex content on simple objects or simple content on complex; Strong versus loose connections between the physical object and the digital content. This paper is based on four cases, two of which concern cultural heritage installations, the others...

  20. Planning and acceptance testing of MV therapy installations

    International Nuclear Information System (INIS)

    Almond, Peter R.; Horton, John L.

    1995-01-01

    Purpose: This course is designed for practitioners and beginners in brachytherapy. The aim is to review biological principles equipment are aware of all aspects involved. The object is to cover in a broad overview the considerations that go into selecting, installing, testing and accepting megavoltage therapy equipment and to provide a resource for more detailed information. Planning and acceptance testing of a megavoltage therapy installation is a major undertaking for any size group, institution or department. It can take approximately two years from the time a decision is made to get a machine to where the first patient is treated. Because the equipment and site preparation are expensive, and most of the machines are complex and can be supplied by several different manufacturers, it is imperative that a great deal of thought and care go into the decision: the aim being that the specifications of the machine that is installed meet the immediate need of the department and the needs for the projected lifetime of the equipment. A general survey of the types of equipment available will be presented. This will concentrate on general purpose linear accelerators, although Cobalt 60 machines, microtrons and special purpose machines (intra-operative equipment) will also be covered. General descriptions of the machines along with typical specifications will be given. Selecting the best machine to meet specific needs can be quite complex and criteria for making the selection are presented in a series of twelve steps. site selection and room design, including the console area, are also critical. The general principles for shielding calculations will be provided. Critical to any installation is the acceptance testing of the equipment including material and radiation oncology performance tests. These tests will be outlined. A reading list of suitable references describing in detail many of the aspects of this course will be provided