[Investigation on pattern of quality control for Chinese materia medica based on famous-region drug and bioassay--the work reference].

Science.gov (United States)

Yan, Dan; Xiao, Xiaohe

2011-05-01

Selection and standardization of the work reference are the technical issues to be faced with in the bioassay of Chinese materia medica. Taking the bioassay of Coptis chinensis. as an example, the manufacture process of the famous-region drugs extraction was explained from the aspects of original identification, routine examination, component analysis and bioassay. The common technologies were extracted, and the selection and standardization procedures of the work reference for the bioassay of Chinese materia medica were drawn up, so as to provide technical support for constructing a new mode and method of the quality control of Chinese materia medica based on the famous-region drugs and bioassay.

Patient and referring health care provider satisfaction with a physiotherapy spinal triage assessment service

Directory of Open Access Journals (Sweden)

Bath B

2011-12-01

Full Text Available Brenna Bath1, Bonnie Janzen21School of Physical Therapy, College of Medicine, University of Saskatchewan, 2Community Health and Epidemiology, College of Medicine, University of Saskatchewan, Saskatoon, Saskatchewan, CanadaPurpose: To evaluate participant and referring care provider satisfaction associated with a spinal triage assessment service delivered by physiotherapists in collaboration with orthopedic surgeons.Methods: People with low back-related complaints were recruited from those referred to a spinal triage assessment program delivered by physiotherapists. Measures of patient and provider satisfaction were completed at approximately 4 weeks after the assessment. The satisfaction surveys were analyzed quantitatively with descriptive statistics and qualitatively with an inductive thematic approach of open and axial coding.Results: A total of 108/115 participants completed the posttest satisfaction survey. Sixty-six percent of participants were “very satisfied” with the service and 55% were “very satisfied” with the recommendations that were made. Only 18% of referring care providers completed the satisfaction survey and 90.5% of those were “very satisfied” with the recommendations. Sixty-one participants and 14 care providers provided comments which revealed a diverse range of themes which were coded into positive (ie, understanding the problem, communication, customer service, efficiency, and management direction, negative (ie, lack of detail, time to follow-up, cost and neutral related to the triage service, and an “other” category unrelated to the service (ie, chronic symptoms, comorbidities, and limited access to health care.Conclusion: The quantitative results of the participant survey demonstrated very high levels of satisfaction with the service and slightly less satisfaction with the recommendations that were made. Satisfaction of referring care providers with the recommendations and report was also high, but given

Perceived religious discrimination as predictor of work engagement, with specific reference to the Rastafari religion

Directory of Open Access Journals (Sweden)

Freda van der Walt

2016-03-01

Full Text Available Although perceived religious discrimination has been studied in the past, much remains unknown about the topic. The focus of this study was the Rastafari religion, because this religious group has up to now been excluded from research studies. A cross-sectional descriptive study was conducted with a sample of 80 employees belonging to the Rastafari religion, chosen from organisations in two provinces in South Africa. The findings emanating from the quantitative research study indicated that, on average, the respondents perceived to be discriminated against. Furthermore, a positive relationship was established between perceived religious discrimination and work engagement. These findings advanced the understanding of perceived religious discrimination, and the impact that it may have on work engagement, particularly with reference to the Rastafari religion.Intradisciplinary and/or interdisciplinary implications: The article contributes to the interdisciplinary discourse regarding perceived religious discrimination, with specific reference to the Rastafari religion which is a minority religious group in South Africa. Perceived religious discrimination is discussed and investigated in the context of the workplace, and the aim was to establish whether perceived religious discrimination influences work-related attitudes, such as work engagement. Because previous studies have associated perceived discrimination with less job involvement and career satisfaction, fewer career prospects, greater work conflict, lower feelings of power, decreased job prestige, and less organisational citizenship behaviour (Thomas 2008:80, it was expected that perceived religious discrimination would have a negative influence on work engagement. The findings show that religion possibly provides individuals with the necessary personal resources to persevere when faced with religious discrimination, and sustain performance as well as attain success within the context of the

Use of an eight-arm radial water maze to assess working and reference memory following neonatal brain injury.

Science.gov (United States)

Penley, Stephanie C; Gaudet, Cynthia M; Threlkeld, Steven W

2013-12-04

Working and reference memory are commonly assessed using the land based radial arm maze. However, this paradigm requires pretraining, food deprivation, and may introduce scent cue confounds. The eight-arm radial water maze is designed to evaluate reference and working memory performance simultaneously by requiring subjects to use extra-maze cues to locate escape platforms and remedies the limitations observed in land based radial arm maze designs. Specifically, subjects are required to avoid the arms previously used for escape during each testing day (working memory) as well as avoid the fixed arms, which never contain escape platforms (reference memory). Re-entries into arms that have already been used for escape during a testing session (and thus the escape platform has been removed) and re-entries into reference memory arms are indicative of working memory deficits. Alternatively, first entries into reference memory arms are indicative of reference memory deficits. We used this maze to compare performance of rats with neonatal brain injury and sham controls following induction of hypoxia-ischemia and show significant deficits in both working and reference memory after eleven days of testing. This protocol could be easily modified to examine many other models of learning impairment.

Childcare Providers: Work Stress and Personal Well-Being

Science.gov (United States)

Faulkner, Monica; Gerstenblatt, Paula; Lee, Ahyoung; Vallejo, Viana; Travis, Dnika

2016-01-01

Childcare providers face multiple work-related stressors. Small studies of childcare providers have suggested that providers have high levels of depression compared to the general population. However, unlike other caregiving professions, the research examining childcare providers is sparse, and there is little information to inform practices and…

Memory systems in the rat: effects of reward probability, context, and congruency between working and reference memory.

Science.gov (United States)

Roberts, William A; Guitar, Nicole A; Marsh, Heidi L; MacDonald, Hayden

2016-05-01

The interaction of working and reference memory was studied in rats on an eight-arm radial maze. In two experiments, rats were trained to perform working memory and reference memory tasks. On working memory trials, they were allowed to enter four randomly chosen arms for reward in a study phase and then had to choose the unentered arms for reward in a test phase. On reference memory trials, they had to learn to visit the same four arms on the maze on every trial for reward. Retention was tested on working memory trials in which the interval between the study and test phase was 15 s, 15 min, or 30 min. At each retention interval, tests were performed in which the correct WM arms were either congruent or incongruent with the correct RM arms. Both experiments showed that congruency interacted with retention interval, yielding more forgetting at 30 min on incongruent trials than on congruent trials. The effect of reference memory strength on the congruency effect was examined in Experiment 1, and the effect of associating different contexts with working and reference memory on the congruency effect was studied in Experiment 2.

Effectiveness of Reference Services in Providing Students ...

African Journals Online (AJOL)

after spending lots of money due to some reason and the other. .... services include various forms of current awareness and selective dissemination of ... the users. Personal attention is at the very heart of the reference desk, and the goal of the.

June, 2015 Utilization of Reference Resources and Services

African Journals Online (AJOL)

Department of Library and Information Science, MAUTECH, Yola ... reference resources and services mostly for their course work and research works. ... business settings; reference services provided ..... Table 5: Strategies to be adopted to overcome the problems of provision and .... American Library Association, p.782.

CSS Pocket Reference

CERN Document Server

Meyer, Eric

2011-01-01

When you're working with CSS and need a quick answer, CSS Pocket Reference delivers. This handy, concise book provides all of the essential information you need to implement CSS on the fly. Ideal for intermediate to advanced web designers and developers, the 4th edition is revised and updated for CSS3, the latest version of the Cascading Style Sheet specification. Along with a complete alphabetical reference to CSS3 selectors and properties, you'll also find a short introduction to the key concepts of CSS. Based on Cascading Style Sheets: The Definitive Guide, this reference is an easy-to-us

Prefrontal Cortical GABA Modulation of Spatial Reference and Working Memory

OpenAIRE

Auger, Meagan L.; Floresco, Stan B.

2014-01-01

Background: Dysfunction in prefrontal cortex (PFC) GABA transmission has been proposed to contribute to cognitive dysfunction in schizophrenia, yet how this system regulates different cognitive and mnemonic functions remains unclear. Methods: We assessed the effects of pharmacological reduction of GABAA signaling in the medial PFC of rats on spatial reference/working memory using different versions of the radial-arm maze task. We used a massed-trials procedure to probe how PFC GABA regulates ...

Canvas Pocket Reference Scripted Graphics for HTML5

CERN Document Server

Flanagan, David

2010-01-01

The Canvas element is a revolutionary feature of HTML5 that enables powerful graphics for rich Internet applications, and this pocket reference provides the essentials you need to put this element to work. If you have working knowledge of JavaScript, this book will help you create detailed, interactive, and animated graphics -- from charts to animations to video games -- whether you're a web designer or a programmer interested in graphics. Canvas Pocket Reference provides both a tutorial that covers all of the element's features with plenty of examples and a definitive reference to each of t

"In Your Face" Reference Service.

Science.gov (United States)

Lipow, Anne Grodzins

1999-01-01

Discusses changes in library reference service that have occurred with growing Internet use. Topics include the human factor that is still needed; the nature of reference questions; the goal of user self-sufficiency; the invisible nature of much of librarians' work; and providing real-time, interactive point-of-need service to remote users. (LRW)

Biomedical Engineering Desk Reference

CERN Document Server

Ratner, Buddy D; Schoen, Frederick J; Lemons, Jack E; Dyro, Joseph; Martinsen, Orjan G; Kyle, Richard; Preim, Bernhard; Bartz, Dirk; Grimnes, Sverre; Vallero, Daniel; Semmlow, John; Murray, W Bosseau; Perez, Reinaldo; Bankman, Isaac; Dunn, Stanley; Ikada, Yoshito; Moghe, Prabhas V; Constantinides, Alkis

2009-01-01

A one-stop Desk Reference, for Biomedical Engineers involved in the ever expanding and very fast moving area; this is a book that will not gather dust on the shelf. It brings together the essential professional reference content from leading international contributors in the biomedical engineering field. Material covers a broad range of topics including: Biomechanics and Biomaterials; Tissue Engineering; and Biosignal Processing* A hard-working desk reference providing all the essential material needed by biomedical and clinical engineers on a day-to-day basis * Fundamentals, key techniques,

Microsoft Windows 7 Administration Instant Reference

CERN Document Server

Panek, William

2010-01-01

An on-the-spot reference for Windows 7 administrators. Hundreds of thousands of IT administrators, network administrators, and IT support technicians work daily with Windows 7. This well-organized, portable reference covers every facet of Windows 7, providing no-nonsense instruction that is readily accessible when you need it. Designed for busy administrators, it features thumb tabs and chapter outlines to make answers easy to find.: Windows 7 administrative and support personnel need quick answers to situations they confront each day; this Instant Reference is designed to provide information,

Health Care Providers' Spirit at Work Within a Restructured Workplace.

Science.gov (United States)

Wagner, Joan I J; Brooks, Denise; Urban, Ann-Marie

2018-01-01

Spirit at work (SAW) research emerged as a response to care provider determination to maintain a healthy and productive health care work environment, despite restructuring. The aim of this descriptive mixed-methods research is to present the care provider's perceptions of SAW. SAW is a holistic measure of care provider workplace outcomes, defined as the unique experience of individuals who are passionate about and energized by their work. A mixed group of licensed and unlicensed care providers in a continuing care workplace were surveyed. Eighteen Likert-type scale survey questions were further informed by two open-ended questions. Results indicated that unlicensed continuing care providers' perceptions of SAW are lower than licensed care providers. Responses suggest that open discussion between managers and team members, combined with structured workplace interventions, will lead to enhanced SAW and improved patient care. Further research on SAW within the continuing care workplace is required.

The use of Reference Management tools to improve Citation

OpenAIRE

Ebrahim, Nader Ale

2016-01-01

Reference Management tools offer an easy way of finding relevant literature, collecting references, organizing them in a database, and insert citations works in a manuscript with proper citation style. Most of the new Reference Management tools provide facility to connect with other researchers that you can’t find on other platforms. A Web-based reference management provide easier collaboration and use across multiple devices and assist you to improve publication visibility.

Selected Reference Books of 1998.

Science.gov (United States)

McIlvaine, Eileen

1999-01-01

Reviews a selection of recent scholarly and general reference works under the categories of Periodicals and Newspapers, Philosophy, Literature, Film and Radio, Art and Architecture, Music, Political Science, Women's Studies, and History. A brief summary of new editions of standard works is provided at the end of the articles. (AEF)

Users of Virtual Reference Are More Satisfied with the Service They Receive than the Providers of that Service Think They Are. A Review of: Hansen, D., Johnson, M., Norton, E., & McDonough, A. (2009. Virtual provider pessimism: Analysing instant messaging reference encounters with the pair perception comparison method. Information Research, 14(4. Retrieved from http://informationr.net/ir/14-4/ paper416.html

Directory of Open Access Journals (Sweden)

Carol D. Howe

2011-06-01

Full Text Available Objective – To examine provider pessimism by comparing user and provider perception of the same instant messaging reference transaction.Design – Instant messaging users and providers completed post-reference transaction surveys which were analyzed using the pair perception comparison method.Setting – A large research university in the United States.Subjects – Two hundred undergraduate journalism students (users of the instant messaging service and 51 Master of Library Science (MLS students enrolled in a reference services class (providers of the instant messaging service.Methods – The authors created a research help webpage from which users could access the instant messaging service. Prior to service availability, providers received reference instruction and demonstrated reference aptitude through in-class activities. The authors briefed providers on the project and provided a wiki containing resources they might need during reference transactions. Providers worked in two-hour shifts, and two providers were available during each shift. The service was available for one week while potential users completed a journalism assignment. The authors asked both users and providers of the service to complete an online survey at the conclusion of the reference transaction. Users and providers completed different surveys, but both types included the following four elements: questions to aid in matching a user to a provider; questions about satisfaction with the service based on guidelines put forth by the Reference and User Services Association (RUSA; open-ended questions about the reference transaction; and questions regarding demographics, prior reference service usage, and knowledge of instant messaging. There were 55 valid reference transactions, and from those, the authors matched 26 pairs of user and provider surveys. The authors analyzed paired surveys to (a compare the user’s perception of the reference transaction with the provider�

Production of NDA Working Reference Materials for the Capability Evaluation Project

International Nuclear Information System (INIS)

Noll, P.D. Jr.; Marshall, R.S.

1998-01-01

The production of Non Destructive Assay (NDA) Working Reference Materials (WRMs) that are traceable to nationally recognized standards was undertaken to support implementation of the Idaho National Engineering and Environmental Laboratory (INEEL) Nondestructive Waste Assay Capability Evaluation Project (CEP). The WRMs produced for the CEP project consist of Increased Am/Pu mass ration (IAP) and depleted Uranium (DU) WRMs. The CEP IAP/DU WRM set provides radioactive material standards for use in combination with 55 gallon drum waste matrix surrogates for the assessment of waste NDA assay system performance. The Production of WRMs is a meticulous process that is not without certain trials and tribulations. Problems may arise at any of the various stages of WRM production which include, but are not limited to; material characterization (physical, chemical, and isotopic), material blend parameters, personnel radiation exposure, gas generation phenomenon, traceability to national standards, encapsulation, statistical evaluation of the data, and others. Presented here is an overall description of the process by which the CEP WRMs were produced and certified as well as discussions pertaining to some of the problems encountered and how they were solved

Return-to-work intervention during cancer treatment - The providers' experiences

DEFF Research Database (Denmark)

Petersen, K S; Momsen, A H; Stapelfeldt, C M

2018-01-01

To explore in-depth understanding of providers' experiences when involved in a return-to-work (RTW) intervention offered during cancer treatment. Semi-structured individual interviews and participant observations at a hospital department and two municipal job centers were carried out, including ten...... providers (physicians, nurses and social workers). A phenomenological-hermeneutic approach was applied, involving coding, identification of themes and interpretation of findings. Three major themes were identified: Treatment first, Work as an integrated component in cancer rehabilitation, and Challenges...... in bringing up work issues. Differences in providers' experiences of the RTW intervention offered to cancer patients were found: in the hospital setting RTW was a second priority, whereas in the municipality job centers it was an integrated component. Further studies are needed to investigate how and when...

Pregnant at work: time for prenatal care providers to act.

Science.gov (United States)

Karkowsky, Chavi Eve; Morris, Liz

2016-09-01

Fifty years ago, when a woman became pregnant, she was expected to stop working. Today, however, most women who work are the primary, sole, or co-breadwinner for their families, and their earnings during pregnancy are often essential to their families' economic well-being. Medical data about working during pregnancy are sparse but generally show that both low-risk and high-risk women can tolerate work-related duties well, although some work accommodations (eg, providing a chair for sitting, allowing snacks, or modifying the work schedule) may be necessary. However, some employers refuse to accommodate pregnant women who need adjustments. This can result in a woman being forced to make the choice between working without accommodations and losing her income and health insurance or even her job. Prenatal care providers can play an important role by implementing changes in their own practice, shaping public policy, and conducting research to increase protections for pregnant women and to ensure that they receive medically recommended accommodations while continuing to earn income for their growing families. Copyright © 2016 Elsevier Inc. All rights reserved.

National Survey of Adult and Pediatric Reference Intervals in Clinical Laboratories across Canada: A Report of the CSCC Working Group on Reference Interval Harmonization.

Science.gov (United States)

Adeli, Khosrow; Higgins, Victoria; Seccombe, David; Collier, Christine P; Balion, Cynthia M; Cembrowski, George; Venner, Allison A; Shaw, Julie

2017-11-01

Reference intervals are widely used decision-making tools in laboratory medicine, serving as health-associated standards to interpret laboratory test results. Numerous studies have shown wide variation in reference intervals, even between laboratories using assays from the same manufacturer. Lack of consistency in either sample measurement or reference intervals across laboratories challenges the expectation of standardized patient care regardless of testing location. Here, we present data from a national survey conducted by the Canadian Society of Clinical Chemists (CSCC) Reference Interval Harmonization (hRI) Working Group that examines variation in laboratory reference sample measurements, as well as pediatric and adult reference intervals currently used in clinical practice across Canada. Data on reference intervals currently used by 37 laboratories were collected through a national survey to examine the variation in reference intervals for seven common laboratory tests. Additionally, 40 clinical laboratories participated in a baseline assessment by measuring six analytes in a reference sample. Of the seven analytes examined, alanine aminotransferase (ALT), alkaline phosphatase (ALP), and creatinine reference intervals were most variable. As expected, reference interval variation was more substantial in the pediatric population and varied between laboratories using the same instrumentation. Reference sample results differed between laboratories, particularly for ALT and free thyroxine (FT4). Reference interval variation was greater than test result variation for the majority of analytes. It is evident that there is a critical lack of harmonization in laboratory reference intervals, particularly for the pediatric population. Furthermore, the observed variation in reference intervals across instruments cannot be explained by the bias between the results obtained on instruments by different manufacturers. Copyright © 2017 The Canadian Society of Clinical Chemists

Prevalence of work-related health problems among providers of car ...

African Journals Online (AJOL)

Prevalence of work-related health problems among providers of car battery ... the use of personal protective devices and safety measures should be promoted. Keywords: Prevalence, work-related, battery chargers, occupational health, Nigeria ...

The Paranormal: A Selected Bibliography of Serials and Reference Works, with Commentary.

Science.gov (United States)

Smith, Charles H.

1997-01-01

Provides bibliography of references and serials to assist acquisitions librarians in selection of the paranormal. Topics include alchemy, astrology, magic, conjuring, witchcraft, paganism, demonology, satanism, voodooism, sorcery, cults, shamanism, UFOs, exobiology, curious physical and biological phenomena, ghosts, poltergeists, haunted places,…

A selective annotated bibliography for clinical audiology (1988-2008): reference works.

Science.gov (United States)

Ferrer-Vinent, Susan T; Ferrer-Vinent, Ignacio J

2009-06-01

This is the 1st in a series of 3 planned companion articles that present a selected, annotated, and indexed bibliography of clinical audiology publications from 1988 to 2008. Research and preparation of the bibliography were based on published guidelines, professional audiology experience, and professional librarian experience. This article presents reference works (dictionaries, encyclopedias, handbooks, and manuals). The future planned articles will cover other monographs, periodicals, and online resources. Audiologists and librarians can use these lists as a guide when seeking clinical audiology literature.

Targeted Evolution of Embedded Librarian Services: Providing Mobile Reference and Instruction Services Using iPads.

Science.gov (United States)

Stellrecht, Elizabeth; Chiarella, Deborah

2015-01-01

The University at Buffalo Health Sciences Library provides reference and instructional services to support research, curricular, and clinical programs of the University at Buffalo. With funding from an NN/LM MAR Technology Improvement Award, the University at Buffalo Health Sciences Library (UBHSL) purchased iPads to develop embedded reference and educational services. Usage statistics were collected over a ten-month period to measure the frequency of iPad use for mobile services. While this experiment demonstrates that the iPad can be used to meet the library user's needs outside of the physical library space, this article will also offer advice for others who are considering implementing their own program.

Use of an Eight-arm Radial Water Maze to Assess Working and Reference Memory Following Neonatal Brain Injury

OpenAIRE

Penley, Stephanie C.; Gaudet, Cynthia M.; Threlkeld, Steven W.

2013-01-01

Working and reference memory are commonly assessed using the land based radial arm maze. However, this paradigm requires pretraining, food deprivation, and may introduce scent cue confounds. The eight-arm radial water maze is designed to evaluate reference and working memory performance simultaneously by requiring subjects to use extra-maze cues to locate escape platforms and remedies the limitations observed in land based radial arm maze designs. Specifically, subjects are required to avoid ...

Reference values for physical performance measures in the aging working population.

Science.gov (United States)

Cote, Mark P; Kenny, Anne; Dussetschleger, Jeffrey; Farr, Dana; Chaurasia, Ashok; Cherniack, Martin

2014-02-01

The aim of this study was to determine reference physical performance values in older aging workers. Cross-sectional physical performance measures were collected for 736 manufacturing workers to assess effects of work and nonwork factors on age-related changes in musculoskeletal function and health. Participants underwent surveys and physical testing that included bioelectrical impedance analysis, range-of-motion measures, exercise testing, and dynamic assessment. Physical characteristics, such as blood pressure and body fat percentage, were comparable to published values. Dynamic and range-of-motion measurements differed from published normative results. Women had age-related decreases in cervical extension and lateral rotation. Older men had better spinal flexion than expected. Predicted age-related decline in lower-extremity strength and shoulder strength in women was not seen. Men declined in handgrip, lower-extremity strength, and knee extension strength, but not trunk strength, across age groups. There was no appreciable decline in muscle fatigue at the trunk, shoulder, and knee with aging for either gender, except for the youngest age group of women. Normative values may underestimate physical performance in "healthy" older workers, thereby underappreciating declines in less healthy older workers. Work may be preservative of function for a large group of selected individuals. A "healthy worker effect" may be greater for musculoskeletal disease and function than for heart disease and mortality. Clinicians and researchers studying musculoskeletal function in older workers can use a more specific set of reference values.

Medicare Referring Provider DMEPOS PUF

Data.gov (United States)

U.S. Department of Health & Human Services — This dataset, which is part of CMSs Medicare Provider Utilization and Payment Data, details information on Durable Medical Equipment, Prosthetics, Orthotics and...

Not Babysitting: Work Stress and Well-Being for Family Child Care Providers

Science.gov (United States)

Gerstenblatt, Paula; Faulkner, Monica; Lee, Ahyoung; Doan, Linh Thy; Travis, Dnika

2014-01-01

Family child care providers contend with a number of work stressors related to the dual roles of operating a small business and providing child care in their home. Research has documented many sources of work related stress for family child care providers; however, research examining family child care providers' experiences outside of the…

Influence of work environment on the quality of benefits provided by primary health care nurses

Directory of Open Access Journals (Sweden)

Katarzyna Tomaszewska

2017-08-01

Full Text Available The work of a nurse plays a significant role in the treatment, rehabilitation and promotion of patient health. It is particularly important in the patient's home environment. The variety of benefits provided requires specific skills, abilities as well as the need for constant updating of knowledge. What is more, an environmental nurse working alone in the patient's home for his or her patients is often an authority. The quality of nursing is considered from the very beginning of its professional development. It is one of the elements of health care but no less important than others. It refers to the direct relationship between the patient and the nurse. It is dependent on many factors, primarily from the working environment. Purpose of research The aim of the study was to find nurses' opinions about the impact of the working environment on the quality of services provided within the primary care Material and methods For the purposes of this paper, a questionnaire consisting of 20 questions was used. The study was conducted among 128 family nurses of the Podkarpackie Voivodeship from January to April 2017. All persons were informed about the purpose of the study. They were voluntary and anonymous. For the purpose of this paper, hypotheses were used for questions on nominal scales: V Kramer (2x3, 4x5, etc., Phi (2x2. Tb - Kendall or Tc tests were used for the order scales. Statistical analysis was performed using the SPSS program and all compounds were statistically significant when p <0.05. Results and conclusions: 128 nurses participated in the study. The average age of the respondents was nearly 41 years +/- 9 years. 15.6% of the respondents provided individual nursing care, 21.1% as part of a group nursing practice, and 30.5% were employed in non-public health care facilities. The remaining 25.8% in public outpatient clinics of primary care. The results of the research indicate significant variation in the working conditions of nurses in the

A reference guide to quality assurance for diagnostic radiography

International Nuclear Information System (INIS)

1986-01-01

The College of Radiographers, through its Professional and Technical Committee, set up a small Working Party to compile a list of references which would help radiographers to become experts at Quality Assurance in Diagnostic Imaging departments. The list is not comprehensive, but includes references which the Working Party have experience of and have found useful. The references provided should aid in the objectives of:- 1. determining acceptable standards of new equipment; 2. making comparisons during use with accepted base line performance; 3. establishing loss of cost effectiveness and the need for replacement. (author)

Frontal eye fields involved in shifting frame of reference within working memory for scenes

DEFF Research Database (Denmark)

Wallentin, Mikkel; Roepstorff, Andreas; Burgess, Neil

2008-01-01

Working memory (WM) evoked by linguistic cues for allocentric spatial and egocentric spatial aspects of a visual scene was investigated by correlating fMRI BOLD signal (or "activation") with performance on a spatial-relations task. Subjects indicated the relative positions of a person or object...... (referenced by the personal pronouns "he/she/it") in a previously-shown image relative to either themselves (egocentric reference frame) or shifted to a reference frame anchored in another person or object in the image (allocentric reference frame), e.g. "Was he in front of you/her?" Good performers had both...... shorter response time and more correct responses than poor performers in both tasks. These behavioural variables were entered into a principal component analysis. The first component reflected generalised performance level. We found that the frontal eye fields (FEF), bilaterally, had a higher BOLD...

Cyberplagiarism webliography. References to academic cyberplagiarism on the internet

Directory of Open Access Journals (Sweden)

Jaume Sureda

2008-12-01

Full Text Available This article provides references to the documentation sources available on the internet, which may give interested readers a deeper insight into aspects of the multi-faceted issue of academic plagiarism in the student community.With that aim in mind, this paper is divided into six sections. The first provides information on research groups and centres working on the issue of plagiarism. The second gives references to academic journals focusing directly on the issue of academic plagiarism, and some others which publish articles on that subject regularly. The third refers to conferences and events aimed at analysing this phenomenon. The next two sections provide bibliographies and studies on plagiarism among students. The last section refers to documentary sources on various strategies for countering plagiarism.

D2.3 - ENCOURAGE platform reference architecture

DEFF Research Database (Denmark)

Ferreira, Luis Lino; Pinho, Luis Miguel; Albano, Michele

2012-01-01

documents produced in work package WP2, the framework for the detailed specification activities to be developed in the technical work packages of the project (WP3-WP6). In order to provide the required background for the ENCOURAGE platform reference, the document describes the most relevant standards...... and functionalities of the modules of the architecture logical blocks. Furthermore, the document defines the main interface standards to be used for interoperability. These functionalities and interfaces will then be specified in detail in work packages WP3-WP6. Finally, the document provides the mapping...

Electrical engineering a pocket reference

CERN Document Server

Schmidt-Walter, Heinz

2007-01-01

This essential reference offers you a well-organized resource for accessing the basic electrical engineering knowledge you need for your work. Whether you're an experienced engineer who appreciates an occasional refresher in key areas, or a student preparing to enter the field, Electrical Engineering: A Pocket Reference provides quick and easy access to fundamental principles and their applications. You also find an extensive collection of time-saving equations that help simplify your daily projects.Supported with more than 500 diagrams and figures, 60 tables, and an extensive index, this uniq

Health-related quality of life and working conditions among nursing providers.

Science.gov (United States)

Silva, Amanda Aparecida; Souza, José Maria Pacheco de; Borges, Flávio Notarnicola da Silva; Fischer, Frida Marina

2010-08-01

To evaluate working conditions associated with health-related quality of life (HRQL) among nursing providers. Cross-sectional study conducted in a university hospital in the city of São Paulo, Southeastern Brazil, during 2004-2005. The study sample comprised 696 registered nurses, nurse technicians and nurse assistants, predominantly females (87.8%), who worked day and/or night shifts. Data on sociodemographic information, working and living conditions, lifestyles, and health symptoms were collected using self-administered questionnaires. The following questionnaires were also used: Job Stress Scale, Effort-Reward Imbalance (ERI) and Medical Outcomes Study 36-Item Short-Form Health Survey (SF-36). Ordinal logistic regression analysis using proportional odds model was performed to evaluate each dimension of the SF-36. Around 22% of the sample was found to be have high strain and 8% showed an effort-reward imbalance at work. The dimensions with the lowest mean scores in the SF-36 were vitality, bodily pain and mental health. High-strain job, effort-reward imbalance (ERI>1.01), and being a registered nurse were independently associated with low scores on the role emotional dimension. Those dimensions associated to mental health were the ones most affected by psychosocial factors at work. Effort-reward imbalance was more associated with health than high-strain (high demand and low control). The study results suggest that the joint analysis of psychosocial factors at work such as effort-reward imbalance and demand-control can provide more insight to the discussion of professional roles, working conditions and HRQL of nursing providers.

Method for linking a media work to perform an action, involves linking an electronic media work with a reference electronic media work identifier associated with a reference electronic media work using an approximate neighbor search

DEFF Research Database (Denmark)

2016-01-01

A computer-implemented method including the steps of: receiving, by a computer system including at least one computer, a media work uploaded from a first electronic device; receiving, by the computer system from a second electronic device, a tag associated with the media work having a media work...... identifier; storing, by the computer system, the media work identifier and the associated tag; obtaining, by the computer system from a third electronic device, a query related to the associated tag; correlating, by the computer system, the query with associated information related to an action...... to be performed; and providing, from the computer system to the third electronic device, the associated information to be used in performing the action....

Men's Provider-Role Attitudes: Implications for Household Work and Marital Satisfaction.

Science.gov (United States)

Perry-Jenkins, Maureen; Crouter, Ann C.

1990-01-01

Examined spousal division of work inside and outside family home in couples (N=43) and cognitions men attach to their work and family roles. Found men's provider-role attitudes were related to their family work involvement. Found congruence of role beliefs and role behavior within home related to higher levels of marital satisfaction for men.…

The Work-Family Support Roles of Child Care Providers across Settings

Science.gov (United States)

Bromer, Juliet; Henly, Julia R.

2009-01-01

This paper presents a qualitative investigation of the work-family support roles of a sample of 29 child care providers serving low-income families in the Chicago area (16 family, friend, and neighbor providers (FFN), 7 licensed family child care providers (FCC), and 6 center-based teachers). Providers report offering low-income parents…

Accuracy of Answers Provided by Digital/Face-to-Face Reference Services in Japanese Public Libraries and Q & A Sites

Science.gov (United States)

Tsuji, Keita; To, Haruna; Hara, Atsuyuki

2011-01-01

We asked the same 60 questions using DRS (digital reference services) in Japanese public libraries, face-to-face reference services and Q & A (question and answer) sites. It was found that: (1) The correct answer ratio of DRS is higher than that of Q & A sites; (2) DRS takes longer to provide answers as compared to Q & A sites; and (3)…

Record of the first meeting of the working group, London, 6-7 December 1977 (includes terms of reference)

International Nuclear Information System (INIS)

The items discussed include the presentation and adoption of the Group Working Paper on: terms of reference, prime objectives, topics and assessments, criteria for proliferation resistance, the organization of the Group, including the establishment of two sub-groups, schedule of work, assignment of work to be done, and the contributions to be made by international organizations

Hospital nurses' work environment, quality of care provided and career plans.

Science.gov (United States)

Hinno, S; Partanen, P; Vehviläinen-Julkunen, K

2011-06-01

In several European countries, the availability of qualified nurses is insufficient to meet current healthcare requirements. Nurses are highly dissatisfied with the rising demands of the healthcare environment and increasingly considering leaving their jobs. The study aims to investigate the relationships between the characteristics of hospital nurses' work environment and the quality of care provided, and furthermore to examine Dutch nurses' career plans. A cross-sectional, questionnaire survey of registered nurses (n = 334) working in the academic and district hospitals was conducted in 2005/2006. Previously validated questionnaires translated into the participants' language were used. Factor and regression analysis were used for data analysis. Overall, nurses rated their work environment rather favourably. Five work environment characteristics were identified: support for professional development, adequate staffing, nursing competence, supportive management and teamwork. Significant relationships were found between nurses' perceptions of their work environment characteristics and quality of care provided and nurses' career plans. When work environment characteristics were evaluated to be better, nurse-assessed quality of care also increased and intentions to leave current job decreased linearly. Study findings suggest that nurses' perceptions of their work environment are important for nurse outcomes in hospital settings. Further research is needed to explore the predictive ability of the work environment for nurse, patient and organizational outcomes in hospitals. © 2011 The Authors. International Nursing Review © 2011 International Council of Nurses.

Writing more informative letters of reference.

Science.gov (United States)

Wright, Scott M; Ziegelstein, Roy C

2004-05-01

Writing a meaningful and valuable letter of reference is not an easy task. Several factors influence the quality of any letter of reference. First, the accuracy and reliability of the writer's impressions and judgment depend on how well he knows the individual being described. Second, the writer's frame of reference, which is determined by the number of persons at the same level that he has worked with, will impact the context and significance of his beliefs and estimations. Third, the letter-writing skills of the person composing the letter will naturally affect the letter. To support the other components of a candidate's application, a letter of reference should provide specific examples of how an individual's behavior or attitude compares to a reference group and should assess "intangibles" that are hard to glean from a curriculum vitae or from test scores. This report offers suggestions that should help physicians write more informative letters of reference.

A novel method of calibrating a MEMS inertial reference unit on a turntable under limited working conditions

Science.gov (United States)

Lu, Jiazhen; Liang, Shufang; Yang, Yanqiang

2017-10-01

Micro-electro-mechanical systems (MEMS) inertial measurement devices tend to be widely used in inertial navigation systems and have quickly emerged on the market due to their characteristics of low cost, high reliability and small size. Calibration is the most effective way to remove the deterministic error of an inertial reference unit (IRU), which in this paper consists of three orthogonally mounted MEMS gyros. However, common testing methods in the lab cannot predict the corresponding errors precisely when the turntable’s working condition is restricted. In this paper, the turntable can only provide a relatively small rotation angle. Moreover, the errors must be compensated exactly because of the great effect caused by the high angular velocity of the craft. To deal with this question, a new method is proposed to evaluate the MEMS IRU’s performance. In the calibration procedure, a one-axis table that can rotate a limited angle in the form of a sine function is utilized to provide the MEMS IRU’s angular velocity. A new algorithm based on Fourier series is designed to calculate the misalignment and scale factor errors. The proposed method is tested in a set of experiments, and the calibration results are compared to a traditional calibration method performed under normal working conditions to verify their correctness. In addition, a verification test in the given rotation speed is implemented for further demonstration.

Production of Working Reference Materials for the Capability Evaluation Project

Energy Technology Data Exchange (ETDEWEB)

Phillip D. Noll, Jr.; Robert S. Marshall

1999-03-01

Nondestructive waste assay (NDA) methods are employed to determine the mass and activity of waste-entrained radionuclides as part of the National TRU (Trans-Uranic) Waste Characterization Program. In support of this program the Idaho National Engineering and Environmental Laboratory Mixed Waste Focus Area developed a plan to acquire capability/performance data on systems proposed for NDA purposes. The Capability Evaluation Project (CEP) was designed to evaluate the NDA systems of commercial contractors by subjecting all participants to identical tests involving 55 gallon drum surrogates containing known quantities and distributions of radioactive materials in the form of sealed-source standards, referred to as working reference materials (WRMs). Although numerous Pu WRMs already exist, the CEP WRM set allows for the evaluation of the capability and performance of systems with respect to waste types/configurations which contain increased amounts of {sup 241}Am relative to weapons grade Pu, waste that is dominantly {sup 241}Am, as well as wastes containing various proportions of depleted uranium. The CEP WRMs consist of a special mixture of PuO{sub 2}/AmO{sub 2} (IAP) and diatomaceous earth (DE) or depleted uranium (DU) oxide and DE and were fabricated at Los Alamos National Laboratory. The IAP WRMS are contained inside a pair of welded inner and outer stainless steel containers. The DU WRMs are singly contained within a stainless steel container equivalent to the outer container of the IAP standards. This report gives a general overview and discussion relating to the production and certification of the CEP WRMs.

Quasi-Monopoly Status of a Non-for-Profit Reference Terminology Provider - An Exemplary Approach on Transparency Improvement Regarding Licensing.

Science.gov (United States)

Dewenter, Heike; Thun, Sylvia

2018-01-01

As the reference terminology SNOMED CT is gaining in significance and seems without alternative in interoperable Electronic Health Records, the holder of its intellectual property, the non-for-profit organization SNOMED International has achieved a quasi-monopoly status as a provider. We examine the current dealing with corporate transparency regarding SNOMED CT licensing together with policy recommendations derived from the research project ASSESS CT, in the context of collaboration with Standardization Organizations. In addition, transparency improvement is proposed based on the economic Principal-Agent-Theory, assuming SNOMED CT Licensees as principals. In this paper we introduce improvement measures with regard to increase transparency in the licensing process addressing to the reference terminology users and especially the terminology provider. The aim is to present strategies towards transparency, with the intent to remove barriers concerning indecisive organization stakeholders and users of a license and fee-based terminology solutions, as well as to overcome resentments connected to the quasi-monopoly status of the provider.

Work Breakdown Structure (WBS) Handbook

Science.gov (United States)

2010-01-01

The purpose of this document is to provide program/project teams necessary instruction and guidance in the best practices for Work Breakdown Structure (WBS) and WBS dictionary development and use for project implementation and management control. This handbook can be used for all types of NASA projects and work activities including research, development, construction, test and evaluation, and operations. The products of these work efforts may be hardware, software, data, or service elements (alone or in combination). The aim of this document is to assist project teams in the development of effective work breakdown structures that provide a framework of common reference for all project elements. The WBS and WBS dictionary are effective management processes for planning, organizing, and administering NASA programs and projects. The guidance contained in this document is applicable to both in-house, NASA-led effort and contracted effort. It assists management teams from both entities in fulfilling necessary responsibilities for successful accomplishment of project cost, schedule, and technical goals. Benefits resulting from the use of an effective WBS include, but are not limited to: providing a basis for assigned project responsibilities, providing a basis for project schedule development, simplifying a project by dividing the total work scope into manageable units, and providing a common reference for all project communication.

Project summary plan for HTGR recycle reference facility

International Nuclear Information System (INIS)

Baxter, B.J.

1979-11-01

A summary plan is introduced for completing conceptual definition of an HTGR Recycle Reference Facility (HRRF). The plan describes a generic project management concept, often referred to as the requirements approach to systems engineering. The plan begins with reference flow sheets and provides for the progressive evolution of HRRF requirements and definition through feasibility, preconceptual, and conceptual phases. The plan lays end-to-end all the important activities and elements to be treated during each phase of design. Identified activities and elements are further supported by technical guideline documents, which describe methodology, needed terminology, and where relevant a worked example

Work experience, job-fulfillment and burnout among VMMC providers in Kenya, South Africa, Tanzania and Zimbabwe.

Directory of Open Access Journals (Sweden)

Linnea Perry

Full Text Available BACKGROUND: Human resource capacity is vital to the scale-up of voluntary medical male circumcision (VMMC services. VMMC providers are at risk of "burnout" from performing a single task repeatedly in a high volume work environment that produces long work hours and intense work effort. METHODS AND FINDINGS: The Systematic Monitoring of the Voluntary Medical Male Circumcision Scale-up (SYMMACS surveyed VMMC providers in Kenya, South Africa, Tanzania, and Zimbabwe in 2011 (n = 357 and 2012 (n = 591. Providers self-reported on their training, work experience, levels of job-fulfillment and work fatigue/burnout. Data analysis included a descriptive analysis of VMMC provider characteristics, and both bivariate and multivariate analyses of factors associated with provider work fatigue/burnout. In 2012, Kenyan providers had worked in VMMC for a median of 31 months compared to South Africa (10 months, Tanzania (15 months, and Zimbabwe (11 months. More than three-quarters (78 - 99% of providers in all countries in 2012 reported that VMMC is a personally fulfilling job. However, 67% of Kenyan providers reported starting to experience work fatigue/burnout compared to South Africa (33%, Zimbabwe (17%, and Tanzania (15%. Despite the high level of work fatigue/burnout in Kenya, none of the measured factors (i.e., gender, age, full-time versus part-time status, length of service, number of operations performed, or cadre were significantly associated with work fatigue/burnout in 2011. In 2012, logistic regression found increases in age (p<.05 and number of months working in VMMC (p<.01 were associated with an increased likelihood of experiencing work fatigue/burnout, while higher career total VMMCs decreased the likelihood of experiencing burnout. CONCLUSION: Given cross-country differences, further elucidation of cultural and other contextual factors that may influence provider burnout is required. Continuing to emphasize the contribution that providers make in

Out-of-hospital emergency care providers' work and challenges in a changing care environment.

Science.gov (United States)

Mikkola, Riitta; Paavilainen, Eija; Salminen-Tuomaala, Mari; Leikkola, Päivi

2018-03-01

Acutely ill patients are often treated on site instead of being transported to hospital, so wide-ranging professional competence is required from staff. The aim of this study was to describe and produce new information about out-of-hospital emergency care providers' competence, skills and willingness to engage in self-development activities, and to uncover challenges experienced by care providers in the midst of changing work practices. A quantitative questionnaire was sent to out-of-hospital emergency care providers (N = 142, response rate 53%) of one Finnish hospital district. Data were analysed using spss for Windows 22 software. Almost all respondents found their work interesting and their ability to work independently sufficient. The majority found the work meaningful. Almost 20% felt that work was dominated by constant rush, and 40%, more than half of 25-year-olds but <10% of over 45-years-olds, found the work physically straining. The majority indicated that they had a sufficient theoretical-practical basis to perform their regular duties, and more than one-third felt that they had sufficient skills to deal with multiple patient or disaster situations. Over 20% stated that they were unsure about performing new or infrequent procedures. A number of factors experienced as challenging were revealed. The results provide a basis for improving care providers' initial and further training. © 2017 Nordic College of Caring Science.

Critical care providers refer to information tools less during communication tasks after a critical care clinical information system introduction.

Science.gov (United States)

Ballermann, Mark; Shaw, Nicola T; Mayes, Damon C; Gibney, R T Noel

2011-01-01

Electronic documentation methods may assist critical care providers with information management tasks in Intensive Care Units (ICUs). We conducted a quasi-experimental observational study to investigate patterns of information tool use by ICU physicians, nurses, and respiratory therapists during verbal communication tasks. Critical care providers used tools less at 3 months after the CCIS introduction. At 12 months, care providers referred to paper and permanent records, especially during shift changes. The results suggest potential areas of improvement for clinical information systems in assisting critical care providers in ensuring informational continuity around their patients.

Growth references

NARCIS (Netherlands)

Buuren, S. van

2007-01-01

A growth reference describes the variation of an anthropometric measurement within a group of individuals. A reference is a tool for grouping and analyzing data and provides a common basis for comparing populations.1 A well known type of reference is the age-conditional growth diagram. The

[Reference citation].

Science.gov (United States)

Brkić, Silvija

2013-01-01

Scientific and professional papers represent the information basis for scientific research and professional work. References important for the paper should be cited within the text, and listed at the end of the paper. This paper deals with different styles of reference citation. Special emphasis was placed on the Vancouver Style for reference citation in biomedical journals established by the International Committee of Medical Journal Editors. It includes original samples for citing various types of articles, both printed and electronic, as well as recommendations related to reference citation in accordance with the methodology and ethics of scientific research and guidelines for preparing manuscripts for publication.

Analytical quality control service programme, intercomparison runs, certified reference materials, reference materials 1987-88

International Nuclear Information System (INIS)

1986-12-01

The purpose of the Analytical Quality Control Services (AQCS) programme provided by the IAEA, is to assist laboratories engaged in the analysis of nuclear, environmental, biological, and materials of marine origin for radionuclide, major, minor and trace elements, as well as stable isotopes using atomic and nuclear analytical techniques, to check the quality of their work. The tables give details of the intercomparison samples and reference materials distributed by the IAEA in the period 1987 to 1988. 2 tabs

Reevaluation of the NOAA/CMDL carbon monoxide reference scale and comparisons with CO reference gases at NASA-Langley and the Fraunhofer Institut

Energy Technology Data Exchange (ETDEWEB)

Novelli, P.C.; Collins, J.E. Jr.; Myers, R.C.; Sachse, G.W.; Scheel, H.E. [Univ. of Colordo, Boulder, CO (United States)]|[Science and Technology Corporation, Hampton, VA (United States)]|[NOAA, Boulder, CO (United States)]|[NASA, Langley Research Center, Hampton, VA (United States)]|[Fraunhofer-Inst. fuer Atmospharishce Umweltforschung (Germany)

1994-06-01

The carbon monoxide (CO) reference scale created by the National Oceanic and Atmospheric Administration/Climate Monitoring and Diagnostics Laboratory (NOAA/CMDL) is used to quantify measurements of CO in the atmosphere, calibrate standards of other laboratories and to otherwise provide reference gases to the community measuring atmospheric CO. This reference scale was created based upon a set of primary standards prepared by gravimetric methods at CMDL and has been propagated to a set of working standards. In this paper we compare CO mixing ratios assigned to the working standards by three approaches: (1) calibration against the original gravimetric standards, (2) calibration using only working standards as the reference gas, and (3) calibration against three new gravimetric standards prepared to CMDL. The agreement between these values was typically better than 1%. The calibration histories of CMDL working standards are reviewed with respect to expected rates of CO change in the atmosphere. Using a Monte Carlo approach to simulate the effect of drifting standards on calculated mixing ratios, we conclude that the error solely associated with the maintenance of standards will limit the ability to detect small CO changes in the atmosphere. We also report results of intercalibration experiments conducted between CMDL and the Diode Laser Sensor Group (DACOM) at the NASA Langley Research Center (Hampton, Virginia), and CMDL and the Fraunhofer-Institut (Garmisch-Partenkirchen, Germany). Each laboratory calibrated several working standards for CO using their reference gases, and these results were compared to calibrations conducted by CMDL. The intercomparison of eight standards (CO concentrations between approximately 100 and approximately 165 ppb) by CMDL and NASA agreed to better than +/- 2%. (Abstract Truncated)

Reference and access innovative practices for archives and special collections

CERN Document Server

Theimer, Kate

2014-01-01

Reference and Access: Innovative Practices for Archives and Special Collections explores how archives of different sizes and types are increasing their effectiveness in serving the public and meeting internal needs. The book features twelve case studies that demonstrate new ways to interact with users to answer their questions, provide access to materials, support patrons in the research room, and manage reference and access processes. This volume will be useful to those working in archives and special collections as well as other cultural heritage organizations, and provides ideas ranging fro

A Profession Without Limits: The Changing Role of Reference Librarians.

Science.gov (United States)

Sullo, Elaine; Gomes, Alexandra W

2016-01-01

Reference librarians, specifically those working in academic health sciences environments, have expanded their roles and taken on new and unique responsibilities. While librarians at The George Washington University's Himmelfarb Health Sciences Library continue to provide traditional reference services, they have gone beyond their comfort zone in many cases to become involved in activities that are outside of the librarian's established role. This article describes the current roles of Himmelfarb's reference librarians, as well as the way these librarians prepared for these roles and addressed the associated challenges.

[Job satisfaction and work impact among providers of a mental health service].

Science.gov (United States)

Rebouças, Denise; Legay, Letícia Fortes; Abelha, Lúcia

2007-04-01

To assess job satisfaction and work impact among providers of a mental health service and their potential association with sociodemographic and job-related variables. A cross-sectional study was carried out in 321 employees of a long-stay mental health service in Rio de Janeiro, Southeastern Brazil, in 2005. The following instruments were applied: the WHO Mental Health Services Satisfaction and Work Impact scales, and a questionnaire on sociodemographic and job features. Variable associations were analysed using the Mann-Whitney, Kruskal-Wallis, Chi-square tests and multiple linear regression. The mean score of satisfaction was 3.29 (SD=0.64) and the mean score for work impact was 1.77 (SD=0.62). Of all respondents, 61.8% reported a moderate level of satisfaction. Job satisfaction was positively associated with increasing age, lower schooling, being a non-governmental organization employee, developing non-patient-related activities, being involved in an innovative project. The highest levels of work impact were observed among civil servants, young people and females. Most features associated to the lowest levels of job satisfaction were associated to the highest levels of work impact. Despite the moderate level of satisfaction among providers, there is an evident need for policy changes, mainly those related to increasing availability of supplies and human resources and building restoration.

A Reference Architecture for Providing Tools as a Service to Support Global Software Development

DEFF Research Database (Denmark)

Chauhan, Aufeef

2014-01-01

-computing paradigm for addressing above-mentioned issues by providing a framework to select appropriate tools as well as associated services and reference architecture of the cloud-enabled middleware platform that allows on demand provisioning of software engineering Tools as a Service (TaaS) with focus......Global Software Development (GSD) teams encounter challenges that are associated with distribution of software development activities across multiple geographic regions. The limited support for performing collaborative development and engineering activities and lack of sufficient support......-based solutions. The restricted ability of the organizations to have desired alignment of tools with software engineering and development processes results in administrative and managerial overhead that incur increased development cost and poor product quality. Moreover, stakeholders involved in the projects have...

Technostress and the Reference Librarian.

Science.gov (United States)

Kupersmith, John

1992-01-01

Defines "technostress" as the stress experienced by reference librarians who must constantly deal with the demands of new information technology and the changes they produce in the work place. Discussion includes suggested ways in which both organizations and individuals can work to reduce stress. (27 references) (LAE)

International Geomagnetic Reference Field

DEFF Research Database (Denmark)

Finlay, Chris; Maus, S.; Beggan, C. D.

2010-01-01

The eleventh generation of the International Geomagnetic Reference Field (IGRF) was adopted in December 2009 by the International Association of Geomagnetism and Aeronomy Working Group V‐MOD. It updates the previous IGRF generation with a definitive main field model for epoch 2005.0, a main field...... model for epoch 2010.0, and a linear predictive secular variation model for 2010.0–2015.0. In this note the equations defining the IGRF model are provided along with the spherical harmonic coefficients for the eleventh generation. Maps of the magnetic declination, inclination and total intensity...

Plutonium working reference materials for the NDA PDP program

International Nuclear Information System (INIS)

Marshall, R.; Foley, M.; McCullough, L.; Vance, D.

1995-01-01

Sixty-three QC standards, termed Working Reference Materials (WRMs) are being fabricated at Los Alamos for the Non-destructive Waste Assay Performance Development Plan. The WRMs require Pu and Am distributed uniformly in a low density matrix. A silicone rubber matrix initially specified has been changed to a packed, diatomaceous earth (DE) matrix to facilitate Pu-DE uniformity and minimize gas generation and WRM pressurization. Uniformity and separation stability was demonstrated with iron powder-DE mixtures. To meet the rigorous quality objectives on the mass of Pu and Am for each WRM, a uniform, stable batch of PuO2 with relatively high Am-241 content was prepared by blending, calcining, and screening. Multiple sample analyses demonstrated the PuO2 to be highly uniform and established that tight Pu and Am assay and Pu isotopic analysis precision requirements were met. Test blends were prepared and tested to successfully demonstrate Pu uniformity, freedom from PuO2 clumping, and acceptable alpha-neutron generation rates. Blends of PuO2-DE were prepared individually for each WRM; all 63 blends have been prepared. After loading and packing the blends into zircalloy cylinders, the air atmosphere will be replaced with helium and end caps inserted and welded. Following decontamination and leak checking, the cylinders will be loaded into secondary zircalloy cylinders and sealed with welded end caps

Medicare Referring Provider DMEPOS PUF CY2013

Data.gov (United States)

U.S. Department of Health & Human Services — This dataset, which is part of CMSs Medicare Provider Utilization and Payment Data, details information on Durable Medical Equipment, Prosthetics, Orthotics and...

Reevaluation of the NOAA/CMDL carbon monoxide reference scale and comparisons with CO reference gases at NASA-Langley and the Fraunhofer Institut

Science.gov (United States)

Novelli, P. C.; Collins, J. E., Jr.; Myers, R. C.; Sachse, G. W.; Scheel, H. E.

1994-01-01

The carbon monoxide (CO) reference scale created by the National Oceanic and Atmospheric Administration/Climate Monitoring and Diagnostics Laboratory (NOAA/CMDL) is used to quantify measurements of CO in the atmosphere, calibrate standards of other laboratories and to otherwise provide reference gases to the community measuring atmospheric CO. This reference scale was created based upon a set of primary standards prepared by gravimetric methods at CMDL and has been propagated to a set of working standards. In this paper we compare CO mixing ratios assigned to the working standards by three approaches: (1) calibration against the original gravimetric standards, (2) calibration using only working standards as the reference gas, and (3) calibration against three new gravimetric standards prepared to CMDL. The agreement between these values was typically better than 1%. The calibration histories of CMDL working standards are reviewed with respect to expected rates of CO change in the atmosphere. Using a Monte Carlo approach to simulate the effect of drifting standards on calculated mixing ratios, we conclude that the error solely associated with the maintenance of standards will limit the ability to detect small CO changes in the atmosphere. We also report results of intercalibration experiments conducted between CMDL and the Diode Laser Sensor Group (DACOM) at the NASA Langley Research Center (Hampton, Virginia), and CMDL and the Fraunhofer-Institut (Garmisch-Partenkirchen, Germany). Each laboratory calibrated several working standards for CO using their reference gases, and these results were compared to calibrations conducted by CMDL. The intercomparison of eight standards (CO concentrations between approximately 100 and approximately 165 ppb) by CMDL and NASA agreed to better than +/- 2%. The calibration of six standards (CO concentrations between approximately 50 and approximately 210 ppb) by CMDL and the Fraunhofer-Institut agreed to within +/- 2% for four

AQCS 1990. Intercomparison runs, reference materials

International Nuclear Information System (INIS)

1990-01-01

The purpose of the Analytical Quality Control Services (AQCS) programme provided by the International Atomic Energy Agency (Agency) is to assist laboratories engaged in the analysis of nuclear, environmental, biological, and materials of marine origin for radionuclide, major, minor and trace elements, as well as stable isotopes using atomic and nuclear analytical techniques, to check the quality of their work. Such a control is necessary since results of analytical activities may be the basis upon which economic, administrative, medical or legal decisions are taken; they must, therefore, be documented to be sufficiently reliable. The Agency has instituted the AQCS-programme which for 1990 will involve distributing samples for Intercomparison Runs and Reference Materials in a way similar to that of previous years. The Agency's Analytical Quality Control Services (AQCS) programme provides mainly three types of materials: materials which can be used in analytical laboratories working in the fields of nuclear technology and isotope hydrology. These include uranium ore Reference Materials and other substances of interest for nuclear fuel technology as well as stable isotope Reference Materials for mass spectrometric determination of isotope ratios in natural waters; materials with known content of uranium, thorium and/or transuranium elements or fission products for the determination of environmental radioactivity or control of nuclear safety; materials for use in the determination of stable trace elements in environmental, biomedical and marine research. Radiochemical methods such as neutron activation or isotope dilution analysis are often used in the determination of such trace elements and constitute an important contribution of nuclear techniques to applied science. Tabs

Stability of Working Reference Standards for Hybrid K-Edge Densitometer Quality Assurance

International Nuclear Information System (INIS)

Guzzardo, T.; Pickett, C.A.; McElroy, R.; Croft, S.; Garrison, J.; Venkataraman, R.

2015-01-01

The relatively short working life of aqueous solution standards of actinides for the calibration and quality control of Hybrid K-Edge Densitometer (HKED) measurements necessitates the development of a stable matrix material less susceptible to degradation. Degradation in the form of evaporation, radiolysis, settling, sloshing, and sediment formation can all reduce the reliability and working life of an aqueous standard. These factors make aqueous solutions inadequate for long-term quality assurance measurements designed to detect weak or subtle trends in system performance. Epoxy, studied here, is an alternative matrix material that may be less vulnerable to degradation. An additional benefit of epoxy is that standards can easily be characterized as sealed sources which allows for simplified administrative controls during shipping and storage. The stability of working reference standards consisting of U 3 O 8 in an epoxy matrix for use in the HKED has been tracked for over three years through repeated X-ray Fluorescence (XRF) and K-Edge (KED) measurements. A set of six epoxy standards ranging in concentration from 1 g/l to 76 g/l uranium were determined to be stable, within the expected accuracy of the system, over the period of analysis. During this time, no effort was made to enhance the stability of the epoxy standards; the radial measurement position was not controlled and in the middle of the analysis period the HKED system and standards were shipped from the vendor's factory to the customer. Epoxy standards afford numerous benefits over those created from aqueous solutions and should be considered when developing HKED standards for quality assurance measurements. The stability of the epoxy allows the development of working standards of a stability and robustness sufficient for use in a proposed international round-robin exercise based on the exchange of such standards. (author)

Reference handbook: Level detectors

International Nuclear Information System (INIS)

1990-01-01

The purpose of this handbook is to provide Rocky Flats personnel with the information necessary to understand level measurement and detection. Upon completion of this handbook you should be able to do the following: List three reasons for measuring level. Describe the basic operating principles of the sight glass. Demonstrate proper techniques for reading a sight glass. Describe the basic operating principles of a float level detector. Describe the basic operating principles of a bubbler level indicating system. Explain the differences between a wet and dry reference leg indicating system, and describe how each functions. This handbook is designed for use by experienced Rocky Flats operators to reinforce and improve their current knowledge level, and by entry-level operators to ensure that they possess a minimum level of fundamental knowledge. Level Detectors is applicable to many job classifications and can be used as a reference for classroom work or for self-study. Although this reference handbook is by no means all-encompassing, you will gain enough information about this subject area to assist you in contributing to the safe operation of Rocky Flats Plant

Influence of pharmacological manipulations of NMDA and cholinergic receptors on working versus reference memory in a dual component odor span task.

Science.gov (United States)

MacQueen, David A; Dalrymple, Savannah R; Drobes, David J; Diamond, David M

2016-06-01

Developed as a tool to assess working memory capacity in rodents, the odor span task (OST) has significant potential to advance drug discovery in animal models of psychiatric disorders. Prior investigations indicate OST performance is impaired by systemic administration of N-methyl-d-aspartate receptor (NMDA-r) antagonists and is sensitive to cholinergic manipulations. The present study sought to determine whether an impairment in OST performance can be produced by systemic administration of the competitive NMDA-r antagonist 3-(2-carboxypiperazin-4-yl)propyl-1-phosphonic acid (CPP; 3, 10, 17 mg/kg i.p.) in a unique dual-component variant of the OST, and whether this impairment is ameliorated by nicotine (0.75 mg/kg i.p.). Male Sprague-Dawley rats were trained to asymptotic level of performance on a 24-trial two-comparison incrementing nonmatching to sample OST. In addition, rats were administered a two-comparison olfactory reference memory (RM) task, which was integrated into the OST. The RM task provided an assessment of the effects of drug administration on global behavioral measures, long-term memory and motivation. Several measures of working memory (span, longest run, and accuracy) were dose dependently impaired by CPP without adversely affecting RM. Analysis of drug effects across trial blocks demonstrated a significant impairment of performance even at low memory loads, suggesting a CPP-induced deficit of olfactory short-term memory that is not load-dependent. Although nicotine did not ameliorate CPP-induced impairments in span or accuracy, it did block the impairment in longest run produced by the 10 mg/kg dose of CPP. Overall, our results indicate that performance in our 24 odor two-comparison OST is capacity dependent and that CPP impaired OST working, but not reference, memory. © 2016 MacQueen et al.; Published by Cold Spring Harbor Laboratory Press.

Comprehensive NASA Cis-Lunar Earth Moon Libration Orbit Reference and Web Application

Data.gov (United States)

National Aeronautics and Space Administration — This work will provide research and trajectory design analysis to develop a NASA Cis-Lunar / Earth-Moon Libration Orbit Reference and Web Application. A compendium...

Standard Reference Tables -

Data.gov (United States)

Department of Transportation — The Standard Reference Tables (SRT) provide consistent reference data for the various applications that support Flight Standards Service (AFS) business processes and...

Secondary traumatic stress among mental health providers working with the military: prevalence and its work- and exposure-related correlates.

Science.gov (United States)

Cieslak, Roman; Anderson, Valerie; Bock, Judith; Moore, Bret A; Peterson, Alan L; Benight, Charles C

2013-11-01

Our research assessed the prevalence of secondary traumatic stress (STS) among mental health providers working with military patients. We also investigated personal, work-related, and exposure-related correlates of STS. Finally, using meta-analysis, the mean level of STS symptoms in this population was compared with the mean level of these symptoms in other groups. Participants (N = 224) completed measures of indirect exposure to trauma (i.e., diversity, volume, frequency, ratio), appraisal of secondary exposure impact, direct exposure to trauma, STS, and work characteristics. The prevalence of STS was 19.2%. Personal history of trauma, complaints about having too many patients, and more negative appraisals of the impact caused by an indirect exposure to trauma were associated with higher frequency of STS symptoms. A meta-analysis showed that the severity of intrusion, avoidance, and arousal symptoms of STS was similar across various groups of professionals indirectly exposed to trauma (e.g., mental health providers, rescue workers, social workers).

Position detectors, methods of detecting position, and methods of providing positional detectors

Science.gov (United States)

Weinberg, David M.; Harding, L. Dean; Larsen, Eric D.

2002-01-01

Position detectors, welding system position detectors, methods of detecting various positions, and methods of providing position detectors are described. In one embodiment, a welding system positional detector includes a base that is configured to engage and be moved along a curved surface of a welding work piece. At least one position detection apparatus is provided and is connected with the base and configured to measure angular position of the detector relative to a reference vector. In another embodiment, a welding system positional detector includes a weld head and at least one inclinometer mounted on the weld head. The one inclinometer is configured to develop positional data relative to a reference vector and the position of the weld head on a non-planar weldable work piece.

Roaming Reference: Reinvigorating Reference through Point of Need Service

Directory of Open Access Journals (Sweden)

Kealin M. McCabe

2011-11-01

Full Text Available Roaming reference service was pursued as a way to address declining reference statistics. The service was staffed by librarians armed with iPads over a period of six months during the 2010-2011 academic year. Transactional statistics were collected in relation to query type (Research, Facilitative or Technology, location and approach (librarian to patron, patron to librarian or via chat widget. Overall, roaming reference resulted in an additional 228 reference questions, 67% (n=153 of which were research related. Two iterations of the service were implemented, roaming reference as a standalone service (Fall 2010 and roaming reference integrated with traditional reference desk duties (Winter 2011. The results demonstrate that although the Weller Library’s reference transactions are declining annually, they are not disappearing. For a roaming reference service to succeed, it must be a standalone service provided in addition to traditional reference services. The integration of the two reference models (roaming reference and reference desk resulted in a 56% decline in the total number of roaming reference questions from the previous term. The simple act of roaming has the potential to reinvigorate reference services as a whole, forcing librarians outside their comfort zones, allowing them to reach patrons at their point of need.

Low-level lead exposure effects on spatial reference memory and working memory in rats

Institute of Scientific and Technical Information of China (English)

Xinhua Yang; Ping Zhou; Yonghui Li

2009-01-01

BACKGROUND: Studies have demonstrated that lead exposure can result in cognitive dysfunction and behavior disorders. However, lead exposure impairments vary under different experimental conditions.OBJECTIVE: To detect changes in spatial learning and memory following low-level lead exposure in rats, in Morris water maze test under the same experimental condition used to analyze lead exposure effects on various memory types and learning processes.DESIGN AND SETTING: The experiment was conducted at the Animal Laboratory, Institute of Psychology, Chinese Academy of Science between February 2005 and March 2006. One-way analysis of variance (ANOVA) and behavioral observations were performed.MATERIALS: Sixteen male, healthy, adult, Sprague Dawley rats were randomized into normal control and lead exposure groups (n = 8).METHODS: Rats in the normal control group were fed distilled water, and those in the lead exposure group were fed 250 mL of 0.05% lead acetate once per day. At day 28, all rats performed the Morris water maze test, consisting of four phases: space navigation, probe test, working memory test, and visual cue test.MAIN OUTCOME MEASURES: Place navigation in the Morris water maze was used to evaluate spatial learning and memory, probe trials for spatial reference memory, working memory test for spatial working memory, and visual cue test for non-spatial cognitive function. Perkin-Elmer Model 300 Atomic Absorption Spectrometer was utilized to determine blood lead levels in rats.RESULTS: (1) In the working memory test, the time to reach the platform remained unchanged between the control and lead exposure groups (F(1,1) = 0.007, P = 0.935). A visible decrease in escape latencies was observed in each group (P = 0.028). However, there was no significant difference between the two groups (F(1,1) = 1.869, P = 0.193). The working memory probe test demonstrated no change between the two groups in the time spent in the target quadrant during the working memory probe test

Knowledge Management and Reference Services

Science.gov (United States)

Gandhi, Smiti

2004-01-01

Many corporations are embracing knowledge management (KM) to capture the intellectual capital of their employees. This article focuses on KM applications for reference work in libraries. It defines key concepts of KM, establishes a need for KM for reference services, and reviews various KM initiatives for reference services.

STL pocket reference

CERN Document Server

Lischner, Ray

2003-01-01

The STL Pocket Reference describes the functions, classes, and templates in that part of the C++ standard library often referred to as the Standard Template Library (STL). The STL encompasses containers, iterators, algorithms, and function objects, which collectively represent one of the most important and widely used subsets of standard library functionality. The C++ standard library, even the subset known as the STL, is vast. It's next to impossible to work with the STL without some sort of reference at your side to remind you of template parameters, function invocations, return types--ind

Enterprise Reference Library

Science.gov (United States)

Bickham, Grandin; Saile, Lynn; Havelka, Jacque; Fitts, Mary

2011-01-01

Introduction: Johnson Space Center (JSC) offers two extensive libraries that contain journals, research literature and electronic resources. Searching capabilities are available to those individuals residing onsite or through a librarian s search. Many individuals have rich collections of references, but no mechanisms to share reference libraries across researchers, projects, or directorates exist. Likewise, information regarding which references are provided to which individuals is not available, resulting in duplicate requests, redundant labor costs and associated copying fees. In addition, this tends to limit collaboration between colleagues and promotes the establishment of individual, unshared silos of information The Integrated Medical Model (IMM) team has utilized a centralized reference management tool during the development, test, and operational phases of this project. The Enterprise Reference Library project expands the capabilities developed for IMM to address the above issues and enhance collaboration across JSC. Method: After significant market analysis for a multi-user reference management tool, no available commercial tool was found to meet this need, so a software program was built around a commercial tool, Reference Manager 12 by The Thomson Corporation. A use case approach guided the requirements development phase. The premise of the design is that individuals use their own reference management software and export to SharePoint when their library is incorporated into the Enterprise Reference Library. This results in a searchable user-specific library application. An accompanying share folder will warehouse the electronic full-text articles, which allows the global user community to access full -text articles. Discussion: An enterprise reference library solution can provide a multidisciplinary collection of full text articles. This approach improves efficiency in obtaining and storing reference material while greatly reducing labor, purchasing and

Environmental safety providing during heat insulation works and using thermal insulation materials

Directory of Open Access Journals (Sweden)

Velichko Evgeny

2017-01-01

Full Text Available This article considers the negative effect of thermal insulating materials and products on human health and environment pollution, particularly in terms of the composition of environmentally hazardous construction products. The authors have analyzed the complex measures for providing ecological safety, sanitary and epidemiological requirements, rules and regulations both during thermal insulation works and throughout the following operation of buildings and premises. The article suggests the protective and preventive measures to reduce and eliminate the negative impact of the proceeding of thermal insulation works on the natural environment and on human health.

Work and minor work contracts

CERN Document Server

1999-01-01

The Work and Minor Work contracts are all of the result-oriented type. The work is specified by CERN and the contractor is given full responsibility for its performance. The contracts are thus very similar to supply contracts. The re-tendering of the existing contracts is almost complete, except for some building maintenance contracts. A new cycle of re-tendering for some activities will be launched in the next twelve months. The total estimated expenditure in the year 2000 for the contracts referred to in this document is 27 750 000 Swiss francs at 1999 prices. The Finance Committee is invited: - to approve the proposed expenditure for the extension of contracts for which the estimated amount for the year 2000 exceeds 750 000 Swiss francs, namely those under references 1, 2, 3, 5, 7, 8, 9 and 23, highlighted in Table I; - to take note that all Work and Minor Work contracts have been tendered since 1 January 1994, except the small contracts shown under references 12 and 16 in Table I; - to take note that the ...

Program reference book for the Energy Economic Data Base Program (EEDB)

International Nuclear Information System (INIS)

Allen, R.E.; Brown, P.E.; Hodson, J.S.; Kaminski, R.S.; Ziegler, E.J.

1983-07-01

The objective of the Energy Economic Data Base (EEDB) Program is to provide periodic updates of technical and cost (capital, fuel and operating and maintenance) information for nuclear and comparison electric power generating stations that is of significance to the US Department of Energy (USDOE). The purpose of this Reference Book is to provide the historical content of the EEDB through the Fourth Update (1981). It contains important descriptive and tutorial information concerning the structure and use of the EEDB. It also contains reports of work done to support various aspects of the first four updates, together with significant reference data developed during those updates. As a convenience to the user, it is intended that the Reference Book be sufficiently stable that revisions are required no more frequently than once every five years

The Attentional Blink Provides Episodic Distinctiveness : Sparing at a Cost

NARCIS (Netherlands)

Wyble, Brad; Bowman, Howard; Nieuwenstein, Mark

The attentional blink (J. E. Raymond. K. L. Shapiro, & K. M. Arnett. 1992) refers to an apparent gap in perception observed when a second target follows a first within several hundred milliseconds. Theoretical and computational work have provided explanations for early sets of blink data, but more

The CERN-EU high-energy Reference Field (CERF) facility: applications and latest developments

Science.gov (United States)

Silari, Marco; Pozzi, Fabio

2017-09-01

The CERF facility at CERN provides an almost unique high-energy workplace reference radiation field for the calibration and test of radiation protection instrumentation employed at high-energy accelerator facilities and for aircraft and space dosimetry. This paper describes the main features of the facility and supplies a non-exhaustive list of recent (as of 2005) applications for which CERF is used. Upgrade work started in 2015 to provide the scientific and industrial communities with a state-of-the-art reference facility is also discussed.

Self-Reference Acts as a Golden Thread in Binding.

Science.gov (United States)

Sui, Jie

2016-07-01

In a recent article in this journal, Glyn Humphreys and I proposed a model of how self-reference enhances binding in perception and cognition [1]. We showed that self-reference changes particular functional processes; notably, self-reference increases binding between the features of stimuli and between different stages of processing. Lane and colleagues [2] provide an interesting comment on our article that suggests our theory of self-reference is compatible with Dennett's philosophical perspective on the narrative nature of the self. Although the nature of the self has attracted the attention of both philosophers and scientists, the two disciplines have generated different perspectives on the functions of the self, largely due to their different methodologies. For example, Dennett argues that the self is constituted through human narration on experience [3]. By contrast, work from psychologists and cognitive neuroscientists focuses on the functional and neural mechanisms of self-reference. Copyright © 2016 Elsevier Ltd. All rights reserved.

Family Home Childcare Providers: A Comparison of Subsidized and Non-Subsidized Working Environments and Employee Issues

Science.gov (United States)

Shriner, Michael; Schlee, Bethanne M.; Mullis, Ronald L.; Cornille, Thomas A.; Mullis, Ann K.

2008-01-01

Federal and State Governments provide childcare subsidies for low-income working families. This study compares the encountered issues and working environments of family home providers of subsidized and non-subsidized childcare. Questionnaires were distributed throughout a southeastern state in the United States to 548 family home childcare…

International reference reagents: antihuman globulin. An ISBT/ICSH joint working party report. International Society of Blood Transfusion. International Committee for Standardization in Haematology.

Science.gov (United States)

Case, J; Ford, D S; Chung, A; Collins, R; Kochman, S; Mazda, T; Overbeeke, M; Perera, R; Sakuldamrongpanich, T; Scott, M; Voak, D; Zupańska, B

1999-01-01

An international working party has conducted a study designed to select a suitable reference reagent for antihuman globulin, to replace those first made available in 1987. The chosen preparation contains levels of anti-IgG and anti-C3 (anti-C3c and anti-C3d) potency that are considered suitable to serve for reference when evaluating either polyspecific antihuman globulin reagents or those containing their separate monospecific components. The reference material is available in 2-ml freeze-dried aliquots from seven assigned distribution centres.

Measuring and managing the work environment of the mid-level provider – the neglected human resource

Directory of Open Access Journals (Sweden)

McAuliffe Eilish

2009-02-01

Full Text Available Abstract Background Much has been written in the past decade about the health workforce crisis that is crippling health service delivery in many middle-income and low-income countries. Countries having lost most of their highly qualified health care professionals to migration increasingly rely on mid-level providers as the mainstay for health services delivery. Mid-level providers are health workers who perform tasks conventionally associated with more highly trained and internationally mobile workers. Their training usually has lower entry requirements and is for shorter periods (usually two to four years. Our study aimed to explore a neglected but crucial aspect of human resources for health in Africa: the provision of a work environment that will promote motivation and performance of mid-level providers. This paper explores the work environment of mid-level providers in Malawi, and contributes to the validation of an instrument to measure the work environment of mid-level providers in low-income countries. Methods Three districts were purposively sampled from each of the three geographical regions in Malawi. A total of 34 health facilities from the three districts were included in the study. All staff in each of the facilities were included in the sampling frame. A total of 153 staff members consented to be interviewed. Participants completed measures of perceptions of work environment, burnout and job satisfaction. Findings The Healthcare Provider Work Index, derived through Principal Components Analysis and Rasch Analysis of our modification of an existing questionnaire, constituted four subscales, measuring: (1 levels of staffing and resources; (2 management support; (3 workplace relationships; and (4 control over practice. Multivariate analysis indicated that scores on the Work Index significantly predicted key variables concerning motivation and attrition such as emotional exhaustion, job satisfaction, satisfaction with the profession

Robust training attenuates TBI-induced deficits in reference and working memory on the radial 8-arm maze

OpenAIRE

Sebastian, Veronica; Diallo, Aissatou; Ling, Douglas S. F.; Serrano, Peter A.

2013-01-01

Globally, it is estimated that nearly 10 million people sustain severe brain injuries leading to hospitalization and/or death every year. Amongst survivors, traumatic brain injury (TBI) results in a wide variety of physical, emotional and cognitive deficits. The most common cognitive deficit associated with TBI is memory loss, involving impairments in spatial reference and working memory. However, the majority of research thus far has characterized the deficits associated with TBI on either r...

2002 reference document; Document de reference 2002

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

This 2002 reference document of the group Areva, provides information on the society. Organized in seven chapters, it presents the persons responsible for the reference document and for auditing the financial statements, information pertaining to the transaction, general information on the company and share capital, information on company operation, changes and future prospects, assets, financial position, financial performance, information on company management and executive board and supervisory board, recent developments and future prospects. (A.L.B.)

Uranium reference materials

International Nuclear Information System (INIS)

Donivan, S.; Chessmore, R.

1987-07-01

The Technical Measurements Center has prepared uranium mill tailings reference materials for use by remedial action contractors and cognizant federal and state agencies. Four materials were prepared with varying concentrations of radionuclides, using three tailings materials and a river-bottom soil diluent. All materials were ground, dried, and blended thoroughly to ensure homogeneity. The analyses on which the recommended values for nuclides in the reference materials are based were performed, using independent methods, by the UNC Geotech (UNC) Chemistry Laboratory, Grand Junction, Colorado, and by C.W. Sill (Sill), Idaho National Engineering Laboratory, Idaho Falls, Idaho. Several statistical tests were performed on the analytical data to characterize the reference materials. Results of these tests reveal that the four reference materials are homogeneous and that no large systematic bias exists between the analytical methods used by Sill and those used by TMC. The average values for radionuclides of the two data sets, representing an unbiased estimate, were used as the recommended values for concentrations of nuclides in the reference materials. The recommended concentrations of radionuclides in the four reference materials are provided. Use of these reference materials will aid in providing uniform standardization among measurements made by remedial action contractors. 11 refs., 9 tabs

NASA Work Breakdown Structure (WBS) Handbook

Science.gov (United States)

Terrell, Stefanie M.

2018-01-01

The purpose of this document is to provide program/project teams necessary instruction and guidance in the best practices for Work Breakdown Structure (WBS) and WBS dictionary development and use for project implementation and management control. This handbook can be used for all types of NASA projects and work activities including research, development, construction, test and evaluation, and operations. The products of these work efforts may be hardware, software, data, or service elements (alone or in combination). The aim of this document is to assist project teams in the development of effective work breakdown structures that provide a framework of common reference for all project elements.

Choice of Reference Serum Creatinine in Defining AKI

Science.gov (United States)

Siew, Edward D.; Matheny, Michael E.

2015-01-01

Background/Aims The study of acute kidney injury (AKI) has expanded with the increasing availability of electronic health records and the use of standardized definitions. Understanding the impact of AKI between settings is limited by heterogeneity in the selection of reference creatinine to anchor the definition of AKI. In this mini-review, we discuss different approaches used to select reference creatinine and their relative merits and limitations. Methods We reviewed the literature to obtain representative examples of published baseline creatinine definitions when pre-hospital data were not available, as well as literature evaluating estimation of baseline renal function, using Pubmed and reference back-tracing within known works. Results 1) Prehospital creatinine values are useful in determining reference creatinine, and in high-risk populations, the mean outpatient serum creatinine value 7-365 days before hospitalization closely approximates nephrology adjudication, 2) in patients without pre-hospital data, the eGFR 75 approach does not reliably estimate true AKI incidence in most at-risk populations 3) using the lowest inpatient serum creatinine may be reasonable, especially in those with preserved kidney function, but may generously estimate AKI incidence and severity and miss community-acquired AKI that does not fully resolve, 4) using more specific definitions of AKI (e.g. KIDGO Stage 2 and 3) may help to reduce the effects of misclassification when using surrogate values, and 5) leveraging available clinical data may help refine the estimate of reference creatinine. Conclusions Choosing reference creatinine for AKI calculation is important for AKI classification and study interpretation. We recommend obtaining data on pre-hospital kidney function, wherever possible. In studies where surrogate estimates are used, transparency in how they are applied and discussion that informs the reader of potential biases should be provided. Further work to refine the

AQCS 1989 - Intercomparison runs reference materials

International Nuclear Information System (INIS)

1989-01-01

The purpose of the Analytical Quality Control Services (AQCS) programme provided by the International Atomic Energy Agency (Agency) is to assist laboratories engaged in the analysis of nuclear, environmental, biological, and materials of marine origin for radionuclide, major, minor and trace elements, as well as stable isotopes using atomic and nuclear analytical techniques, to check the quality of their work. Reference Materials available are listed by origin and by analyte giving referenced values and confidence intervals. Only materials, which have one or more properties sufficiently well established from statistical evaluation of previous interlaboratory comparison studies are included. Existing Reference Materials may be updated for previously referenced constituents or properties according to the results of the Agency's Co-ordinated Research Programmes (CRPs) in these fields or according to recently published literature values. They are supplied with a reference sheet stating relevant parameters and properties of the material and can be used as secondary standards for quality control assurance within a laboratory, for checking analytical methods and/or instrumentation or for training purposes. 4 tabs

LINQ Pocket Reference

CERN Document Server

Albahari, Joseph

2008-01-01

Ready to take advantage of LINQ with C# 3.0? This guide has the detail you need to grasp Microsoft's new querying technology, and concise explanations to help you learn it quickly. And once you begin to apply LINQ, the book serves as an on-the-job reference when you need immediate reminders. All the examples in the LINQ Pocket Reference are preloaded into LINQPad, the highly praised utility that lets you work with LINQ interactively. Created by the authors and free to download, LINQPad will not only help you learn LINQ, it will have you thinking in LINQ. This reference explains: LINQ's ke

Does whom you work with matter? Effects of referent group gender and age composition on managers' compensation.

Science.gov (United States)

Ostroff, Cheri; Atwater, Leanne E

2003-08-01

Much research has examined gender and age effects on compensation, concluding that a wage gap exists favoring men and negative stereotypes against older workers persist. Although the effect of an employee's gender or age has been widely studied, little work has examined the impact of the demographic characteristics of a focal employee's immediate referent groups (e.g., subordinates, peers, or supervisors) on pay. The effect of the gender and age composition of a focal manager's subordinates, peers, and supervisor on the manager's compensation levels was investigated in a sample of 2,178 managers across a wide range of organizations and functional areas. After controlling for a number of human capital variables, results indicated that not only does a wage gap favoring men exist, but also managerial pay is lower when managers' referent groups are largely female, when subordinates are outside the prime age group, and when peers and supervisors are younger.

Working with Difficult Group Members.

Science.gov (United States)

Kottler, Jeffrey A.

1994-01-01

Describes types of group members who are challenging in group settings including entitled, manipulative, and character-disordered clients. Provides suggestions for working with these group members, either as isolated cases or as homogenous populations, emphasizing the protection of other clients' rights. Includes 31 references. (Author/CRR)

Estimation of individual reference intervals in small sample sizes

DEFF Research Database (Denmark)

Hansen, Ase Marie; Garde, Anne Helene; Eller, Nanna Hurwitz

2007-01-01

In occupational health studies, the study groups most often comprise healthy subjects performing their work. Sampling is often planned in the most practical way, e.g., sampling of blood in the morning at the work site just after the work starts. Optimal use of reference intervals requires...... from various variables such as gender, age, BMI, alcohol, smoking, and menopause. The reference intervals were compared to reference intervals calculated using IFCC recommendations. Where comparable, the IFCC calculated reference intervals had a wider range compared to the variance component models...

The generation and management of references with the Online Mechanism for References - MORE

Directory of Open Access Journals (Sweden)

Proxério Manoel Felisberto

2015-04-01

Full Text Available The scientific production and the development of academic papers have their own formalities. In this paper, is sought seek from these formalities for the ones that refers to the way of granting merits to the authors of the works used in the theoretical basis, through quotations and references. The goal is to help users of libraries to generate and manage references using a web tool developed for this purpose. There are many applications, in desktop and web platforms, that could be used to do this task. However, some of them require the payment of an expensive license to be fully functional. Others offers free versions, but they are very limited and often do not generate references specified by ABNT. There are others that do not store the generate references for later use. In order to fill this gap, the Online Mechanism for References (MORE was developed and made available to the general public in the web. Even so, the fast technological advances combined with a high number of users demanded an update to the application, done recently. It is important to state that all the work was developed exclusively with proven and free to use technologies. Initially, sought up identified the main tools available to generate and manage references and which free technologies could be used to build interactive web applications. This paper briefly describes the reengineering process that MORE was submitted, its new structure, new requirements met and its expanded portfolio of features. Finally, the results achieved after the reengineering are compared to indicators of its previous version.

Working and reference memory across the estrous cycle of rat: a long-term study in gonadally intact females.

Science.gov (United States)

Pompili, Assunta; Tomaz, Carlos; Arnone, Benedetto; Tavares, Maria Clotilde; Gasbarri, Antonella

2010-11-12

The results of many studies conducted over the past two decades suggested a role of estrogen on mammal's ability to learn and remember. In the present paper, we analyzed the influence that the endogenous fluctuation of estrogen, naturally present across the different phases of estrous cycle of female rats, can exert over the performance of tasks utilized to assess memory. In particular, we analyzed the performances in an eight arms radial maze task, dependent upon working memory, and in a water maze (WM) task, dependent upon spatial reference memory. The water maze is aversively motivated by the desire to escape onto a safe platform, whereas the radial arm maze (RAM) is motivated by food reward. The difference in reinforcement may affect the speed of learning, the strategy adopted and the necessity for accurate navigation. Therefore, coherent results obtained through the two different tasks can be due to mnemonic factors. The study was conducted during a long period of time, 14 months, utilizing gonadally intact females, without pharmacological and surgical treatments. In order to evaluate the post-acquisition phase we first trained the animals to reach the criterion in performing tasks, and then we submitted them to experimental phase. Our results show that estrogen can have an effect on memory processes, and that this effect may be different in relation to different kinds of memory. In fact, in our study, estrogen selectively improved working memory, but not reference memory, during post-acquisition performance of a RAM task with four baited and four un-baited arms. Moreover, WM performances showed that estrogen have a negative effect on spatial reference memory. (c) 2010 Elsevier B.V. All rights reserved.

Chinese reference human voxel phantoms for radiation protection: development, application and recent progress

International Nuclear Information System (INIS)

Pan Yuxi; Qiu Rui; Ren Li; Zhu Huanjun; Li Junli; Liu Liye

2014-01-01

This paper presents the work of constructing Chinese reference human voxel phantoms, taking Chinese reference adult female voxel model for example. In this study, a site-specific skeleton structure was built, some radiation sensitive organs were supplemented. Organ sub-segmentation was taken into account. The constructed phantoms include almost all radiation sensitive organs required by ICRP new recommendation. Masses of the organs are almost consistent with the Chinese reference data within 5%. The Chinese reference human phantoms have been applied both in internal dosimetry and external dosimetry. The results provide fundamental data for Chinese radiation dosimetry. In addition, the newly established detailed breast model and micro-bone model were introduced. (authors)

An algorithm to compute a rule for division problems with multiple references

Directory of Open Access Journals (Sweden)

Sánchez Sánchez, Francisca J.

2012-01-01

Full Text Available In this paper we consider an extension of the classic division problem with claims: Thedivision problem with multiple references. Hinojosa et al. (2012 provide a solution for this type of pro-blems. The aim of this work is to extend their results by proposing an algorithm that calculates allocationsbased on these results. All computational details are provided in the paper.

Endogenizing Prospect Theory's Reference Point

OpenAIRE

Ulrich Schmidt; Horst Zank

2010-01-01

In previous models of (cumulative) prospect theory reference-dependence of preferences is imposed beforehand and the location of the reference point is exogenously determined. This note provides a foundation of prospect theory, where reference-dependence is derived from preference conditions and a unique reference point arises endogenously.

Technical Reference Suite Addressing Challenges of Providing Assurance for Fault Management Architectural Design

Science.gov (United States)

Fitz, Rhonda; Whitman, Gerek

2016-01-01

Research into complexities of software systems Fault Management (FM) and how architectural design decisions affect safety, preservation of assets, and maintenance of desired system functionality has coalesced into a technical reference (TR) suite that advances the provision of safety and mission assurance. The NASA Independent Verification and Validation (IV&V) Program, with Software Assurance Research Program support, extracted FM architectures across the IV&V portfolio to evaluate robustness, assess visibility for validation and test, and define software assurance methods applied to the architectures and designs. This investigation spanned IV&V projects with seven different primary developers, a wide range of sizes and complexities, and encompassed Deep Space Robotic, Human Spaceflight, and Earth Orbiter mission FM architectures. The initiative continues with an expansion of the TR suite to include Launch Vehicles, adding the benefit of investigating differences intrinsic to model-based FM architectures and insight into complexities of FM within an Agile software development environment, in order to improve awareness of how nontraditional processes affect FM architectural design and system health management. The identification of particular FM architectures, visibility, and associated IV&V techniques provides a TR suite that enables greater assurance that critical software systems will adequately protect against faults and respond to adverse conditions. Additionally, the role FM has with regard to strengthened security requirements, with potential to advance overall asset protection of flight software systems, is being addressed with the development of an adverse conditions database encompassing flight software vulnerabilities. Capitalizing on the established framework, this TR suite provides assurance capability for a variety of FM architectures and varied development approaches. Research results are being disseminated across NASA, other agencies, and the

CMS Statistics Reference Booklet

Data.gov (United States)

U.S. Department of Health & Human Services — The annual CMS Statistics reference booklet provides a quick reference for summary information about health expenditures and the Medicare and Medicaid health...

Reference calculations on critical assemblies with Apollo2 code working with a fine multigroup mesh

International Nuclear Information System (INIS)

Aggery, A.

1999-12-01

The objective of this thesis is to add to the multigroup transport code APOLLO2 the capability to perform deterministic reference calculations, for any type of reactor, using a very fine energy mesh of several thousand groups. This new reference tool allows us to validate the self-shielding model used in industrial applications, to perform depletion calculations, differential effects calculations, critical buckling calculations or to evaluate precisely data required by the self shielding model. At its origin, APOLLO2 was designed to perform routine calculations with energy meshes around one hundred groups. That is why, in the current format of cross sections libraries, almost each value of the multigroup energy transfer matrix is stored. As this format is not convenient for a high number of groups (concerning memory size), we had to search out a new format for removal matrices and consequently to modify the code. In the new format we found, only some values of removal matrices are kept (these values depend on a reconstruction precision choice), the other ones being reconstructed by a linear interpolation, what reduces the size of these matrices. Then we had to show that APOLLO2 working with a fine multigroup mesh had the capability to perform reference calculations on any assembly geometry. For that, we successfully carried out the validation with several calculations for which we compared APOLLO2 results (obtained with the universal mesh of 11276 groups) to results obtained with Monte Carlo codes (MCNP, TRIPOLI4). Physical analysis led with this new tool have been very fruitful and show a great potential for such an R and D tool. (author)

Insights Into Care Providers' Understandings of Life Story Work With Persons With Dementia: Findings From a Qualitative Study.

Science.gov (United States)

Berendonk, Charlotte; Caine, Vera

2017-08-01

In Germany, life story work, an approach which acknowledges humans as narrative beings and honors biographies, is required by health authorities to be integrated in care provided in nursing homes. Insufficient attention to life story work could place residents at risk of dehumanization, particularly residents with dementia, who depend on support of others to tell and make meaning of their life experiences. We conducted a qualitative study to gain insights into care providers' perceptions and practices of life story work with persons with dementia. Thirty-six care providers in 7 nursing homes participated in semistructured interviews or group discussions. We derived subjective theories (individual understandings) of care providers and higher-order concept patterns following the principles and processes of grounded theory. We found a great variation in participants' understandings of life story work. Some participants were unsure if and how life story work impacts persons with dementia. Starting points for improving the integration of life story work into practice are discussed. We conclude that care providers need a better understanding of life story work as a nursing intervention. The importance of the notion of humans as narrative beings and the multiple ways in which we story our lives as well as embody life stories needs to be further developed. Knowledge is required about the practical and systemic challenges of integrating life story work in the care of persons with dementia.

Working Together to Promote Diabetes Control: A Practical Guide for Diabetes Health Care Providers in Establishing a Working Alliance to Achieve Self-Management Support.

Science.gov (United States)

Jones, Allan; Vallis, Michael; Cooke, Debbie; Pouwer, François

2016-01-01

The quality of the "patient-carer" relationship is the foundation of self-management support and has been shown to influence treatment outcome in relation to psychological and somatic illness, including diabetes. It has long been accepted within applied psychology that the quality of the client-therapist relationship--termed the working alliance--is of central importance to treatment outcome and may account for a significant degree of the overall treatment effect. Diabetes healthcare providers have recently expressed a need for further training in communication techniques and in the psychological aspects of diabetes. Could we take a page from the psychological treatment manual on working alliance in therapy to guide the diabetes healthcare provider in their role of supporting the person with diabetes achieve and maintain better metabolic control? This paper examines the role of the working alliance in diabetes care and offers a practical guide to the diabetes healthcare provider in establishing a working alliance with the person with diabetes in managing diabetes.

Associations between psychosocial work factors and provider mental well-being in emergency departments: A systematic review.

Directory of Open Access Journals (Sweden)

Anna Schneider

Full Text Available Emergency departments (ED are complex and dynamic work environments with various psychosocial work stressors that increase risks for providers' well-being. Yet, no systematic review is available which synthesizes the current research base as well as quantitatively aggregates data on associations between ED work factors and provider well-being outcomes.We aimed at synthesizing the current research base on quantitative associations between psychosocial work factors (classified into patient-/ task-related, organizational, and social factors and mental well-being of ED providers (classified into positive well-being outcomes, affective symptoms and negative psychological functioning, cognitive-behavioural outcomes, and psychosomatic health complaints.A systematic literature search in eight databases was conducted in December 2017. Original studies were extracted following a stepwise procedure and predefined inclusion criteria. A standardized assessment of methodological quality and risk of bias was conducted for each study with the Quality Assessment Tool for Quantitative Studies from the Effective Public Health Practice Project. In addition to a systematic compilation of included studies, frequency and strength of quantitative associations were synthesized by means of harvest plots. Subgroup analyses for ED physicians and nurses were conducted.N = 1956 records were retrieved. After removal of duplicates, 1473 records were screened for titles and abstracts. 199 studies were eligible for full-text review. Finally, 39 original studies were included whereof 37 reported cross-sectional surveys. Concerning the methodological quality of included studies, the majority was evaluated as weak to moderate with considerable risk of bias. Most frequently surveyed provider outcomes were affective symptoms (e.g., burnout and positive well-being outcomes (e.g., job satisfaction. 367 univariate associations and 370 multivariate associations were extracted with the

Associations between psychosocial work factors and provider mental well-being in emergency departments: A systematic review.

Science.gov (United States)

Schneider, Anna; Weigl, Matthias

2018-01-01

Emergency departments (ED) are complex and dynamic work environments with various psychosocial work stressors that increase risks for providers' well-being. Yet, no systematic review is available which synthesizes the current research base as well as quantitatively aggregates data on associations between ED work factors and provider well-being outcomes. We aimed at synthesizing the current research base on quantitative associations between psychosocial work factors (classified into patient-/ task-related, organizational, and social factors) and mental well-being of ED providers (classified into positive well-being outcomes, affective symptoms and negative psychological functioning, cognitive-behavioural outcomes, and psychosomatic health complaints). A systematic literature search in eight databases was conducted in December 2017. Original studies were extracted following a stepwise procedure and predefined inclusion criteria. A standardized assessment of methodological quality and risk of bias was conducted for each study with the Quality Assessment Tool for Quantitative Studies from the Effective Public Health Practice Project. In addition to a systematic compilation of included studies, frequency and strength of quantitative associations were synthesized by means of harvest plots. Subgroup analyses for ED physicians and nurses were conducted. N = 1956 records were retrieved. After removal of duplicates, 1473 records were screened for titles and abstracts. 199 studies were eligible for full-text review. Finally, 39 original studies were included whereof 37 reported cross-sectional surveys. Concerning the methodological quality of included studies, the majority was evaluated as weak to moderate with considerable risk of bias. Most frequently surveyed provider outcomes were affective symptoms (e.g., burnout) and positive well-being outcomes (e.g., job satisfaction). 367 univariate associations and 370 multivariate associations were extracted with the majority being

The intellectual property cookbook: a guide for the novice health-care telemedicine provider working with industry.

Science.gov (United States)

Beauregard, D; Beauregard, G

2000-01-01

Telemedicine is a new field and many health-care providers are developing their own products with the help of industry. Most practitioners are novices in the legal tools necessary to protect their own work with regard to any future commercialization. To summarize these issues for the telemedicine practitioner, a review of intellectual property protection has been performed. Intellectual property can be protected by tools such as copyrights, patents, non-disclosure and confidentiality agreements, integrated circuit topographies and industrial design. Knowledge of the intellectual property background should allow telemedicine providers to protect their own work when working with industry.

Asessing the New Way of Working : Bricks, Bytes and Behavior

OpenAIRE

de Kok, A.; Koop, J.; Helms, R.W.

2014-01-01

The world in which we work is changing. Information and communication technologies transform the work environment, providing the flexibility of when and where to work. The New Way of Working (NWOW) is a relatively new phenomenon that provides the context for these developments. It consists of three distinct pillars that are referred to as Bricks, Bytes and Behaviour. These pillars formed the basis for the development of the NWOW Analysis Monitor that enables organisations to determine their c...

Patient-Provider Communication: Experiences of Low-Wage-Earning Breast Cancer Survivors in Managing Cancer and Work.

Science.gov (United States)

Nichols, Helen M; Swanberg, Jennifer E; Vanderpool, Robin C

2018-02-26

In 2017, there will be more than 250,000 new diagnoses of invasive breast cancer; most cases will occur in working-age women. The goal of this qualitative study was to explore low-wage-earning breast cancer survivors' experiences communicating with their oncology team about cancer and employment issues. Twenty-four low-wage-earning breast cancer survivors in the USA were interviewed in 2012 using a structured interview protocol. Sociodemographic data, cancer history, and patient-provider communication experiences regarding the management of cancer and work were collected. Interviews were analyzed using grounded theory strategy of constant comparative analysis. Low-wage-earning breast cancer survivors' experiences communicating with their oncology team about employment and cancer focused on three dimensions of patient-provider communication: extent, quality, and content. Over 70% of respondents reported no communication or only routine communication with their providers regarding work; three quarters of women reported poor or standard communication quality, and content of work-related communication covered scheduling issues, work absences, continuing to work during treatment, and financial concerns. Communication between oncology care teams and low-wage-earning cancer patients is critical to the successful management of treatment and work responsibilities given the vulnerable employment situation of these women. There is a need for education of oncology team members about how cancer and its treatment can impact employment for all workers, but especially for low-wage workers, thereby allowing the care team to address these issues proactively and help patients successfully manage both cancer treatment and work responsibilities.

Neptunium: a bibliographic reference

International Nuclear Information System (INIS)

Mosley, R.E.

1979-06-01

A comprehensive bibliograhy of the literature on the element neptunium published prior to January 1976 is presented. A short abstract is given for each listed reference, with a few exceptions. The references are divided into sections categorized as General, Man-Made Sources (Reactors), Man-Made Sources (Fuel Reprocessing), Chemistry (Solubility), Chemistry (Compounds), Chemistry (Isotopes), Analyses (Instrumental), Analyses (Chemical), Chemical (Animal), Biological (Effects), Biological (Animal-Metabolism-Retention), Biological (Air Movement), Biological (Human Inhalation), Measurement, and Dosimetry. The bibliography contains author and keyword indexes and was compiled to serve as a quick reference source for neptunium-related work. 184 citations

Selected Reference Books of 1970-71

Science.gov (United States)

Sheehy, Eugene P.

1971-01-01

A continuation of the semiannual series, this list presents a selection of recent scholarly and foreign works of interest to reference workers in university libraries. It is not intended to be well balanced or comprehensive. (34 references) (Author/NH)

Limites do trabalho multiprofissional: estudo de caso dos centros de referência para DST/Aids Limitations of multiprofessional work: a case study of STD/AIDS reference centers

Directory of Open Access Journals (Sweden)

Neide Emy Kurokawa e Silva

2002-08-01

Full Text Available OBJETIVO: Compreender as possibilidades e os limites da articulação dos processos de trabalho desenvolvidos por agentes com diferentes formações para otimizar a integração e melhorar a qualidade da assistência aos pacientes com HIV/Aids. MÉTODOS: Estudo qualitativo sobre o trabalho multiprofissional em cinco centros de referência para DST/Aids do Município de São Paulo. Foram realizadas entrevistas semi-estruturadas com 26 profissionais de diferentes formações, enfocando suas relações no modo de organização da assistência prestada nesses serviços. RESULTADOS: Houve diferenças significativas do alcance da integração multiprofissional e das possibilidades de enriquecimento da assistência prestada, de acordo com as circunstâncias em que o trabalho interdisciplinar é posto em ação. CONCLUSÕES: Quando a equipe consegue trabalhar com demandas antevistas, isto é, com a formulação, por um conjunto de profissionais, de projetos assistenciais, antecipando demandas a partir de situações concretas da prática, criam-se condições favoráveis a um trabalho mais efetivamente integrado da equipe multiprofissional. Essa integração favorece intervenções que permitem um diálogo mais rico entre a aplicação do tratamento medicamentoso e outras dimensões relevantes do cuidado referentes às vivências sociais, psicológicas e emocionais dos pacientes.OBJECTIVE: To understand the possibilities and limitations of developing coordinated work among professionals of different background in order to promote work collaboration and improve the quality of care of HIV/AIDS patients. METHODS: A qualitative study on multiprofessional work was carried out in five STD/AIDS reference centers in the city of São Paulo, Brazil. Semi-structured interviews were applied to 26 professionals from different background, focusing on how they position their practices in a multiprofessional setting. RESULTS: Significant differences were observed as to

Global absenteeism and presenteeism in mental health patients referred through primary care.

Science.gov (United States)

Bailey, S Kathleen; Haggarty, John; Kelly, Sara

2015-01-01

Disability from mental health (MH) symptoms impairs workers' functioning. Most of what is known about the MH of workers relates to their experiences after intervention or work absence. To profile the clinical symptoms, self-reported absenteeism and presenteeism and treatment response of workers with MH symptoms at the point of accessing MH care and compare the characteristics of patients referred with or without problems related to work. Analysis of 11 years of patient data collected in a Shared Mental Health Care (SMHC) clinic referred within a primary care setting in Ontario, Canada. Multiple regression with MH disorders was used to predict absenteeism and presenteeism. Absenteeism and presenteeism were assessed using the 12-item self-administered version of the WHO-DAS 2. Symptom profiles were assessed with the Patient Health Questionnaire (PHQ). Some psychiatric disorders (depression, somatization, anxiety) contributed more to predicting absenteeism and presenteeism than others. Patients referred with work-related problems differed from the general SMHC population in terms of sex and type and number of symptoms. Treatment response was good in both groups after a mean of three treatment visits. Patients with work-related mental health complaints formed a distinct clinical group that benefitted equally from the intervention(s) provided by SMHC.

Healthcare providers' experiences of working with alcohol addiction treatment in Thailand.

Science.gov (United States)

Hanpatchaiyakul, Kulnaree; Eriksson, Henrik; Kijsomporn, Jureerat; Östlund, Gunnel

2016-02-01

The high prevalence of alcohol consumption, together with its associated health risk factors, has long-term negative impacts on both society and the economy in Thailand. The aim of this study was to explore the experiences of healthcare providers working with people experiencing alcohol addiction and the treatment programs in a Thai hospital. Qualitative study was applied in this study by conducting focus group interviews with 32 interdisciplinary healthcare providers, most of which were nurses. Content analysis was applied to analyze the verbatim-transcribed data. Two main topics emerged: (1) the collaborative practices related to alcohol treatment, and (2) the fit of the program, including how the treatment program functions. Obstacles were identified and formulated from several sub-categories. The findings included obstacles linked to the imported (Western) program and the patriarchal structure in Thai culture, which seem to intersect and reinforce each other.

Biosphere modelling for the assessment of radioactive waste repositories: the development of a common basis by the BIOMOVS II working group on reference biospheres

International Nuclear Information System (INIS)

VanDorp, F.

1996-01-01

Performance criteria for radioactive waste repositories are often expressed in terms of dose or risk. The characteristics of biosphere modelling for performance assessment are that: a) potential release occurs in the distant future, b) reliable predictions of human behaviour at the time of release are impracticable, and c) the biosphere is not considered to be a barrier. For these and other reasons, many unexplained differences have arisen in the approaches to biosphere modelling. The BIOMOVS II Working Group on Reference Biospheres has developed a) a recommended methodology for biosphere model development, b) a structured electronic list of features, events and processes (FEPs), and c) an illustrative example of the recommended methodology. The Working Group has successfully tested the Interaction Matrix (or Rock Engineering Systems, RES) approach for developing conceptual models. The BIOMOVS II Working Groups on Reference Biospheres and Complementary Studies have achieved considerable harmonisation in approaches to biosphere modelling. (author)

Health-related physical fitness measures: reference values and reference equations for use in clinical practice.

Science.gov (United States)

Tveter, Anne Therese; Dagfinrud, Hanne; Moseng, Tuva; Holm, Inger

2014-07-01

To provide reference values and reference equations for frequently used clinical field tests of health-related physical fitness for use in clinical practice. Cross-sectional design. General community. Convenience sample of volunteers (N=370) between 18 and 90 years of age were recruited from a wide range of settings (ie, work sites, schools, community centers for older adults) and different geographic locations (ie, urban, suburban, rural) in southeastern Norway. Not applicable. The participants conducted 5 clinical field tests (6-minute walk test, stair test, 30-second sit-to-stand test, handgrip test, fingertip-to-floor test). The results of the field tests showed that performance remained unchanged until approximately 50 years of age; after that, performance deteriorated with increasing age. Grip strength (79%), meters walked in 6 minutes (60%), and seconds used on the stair test (59%) could be well predicted by age, sex, height, and weight in participants ≥50 years of age, whereas the performance on all tests was less well predicted in participants clinical practice. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

R quick syntax reference

CERN Document Server

Tollefson, Margot

2014-01-01

The R Quick Syntax Reference is a handy reference book detailing the intricacies of the R language. Not only is R a free, open-source tool, R is powerful, flexible, and has state of the art statistical techniques available. With the many details which must be correct when using any language, however, the R Quick Syntax Reference makes using R easier.Starting with the basic structure of R, the book takes you on a journey through the terminology used in R and the syntax required to make R work. You will find looking up the correct form for an expression quick and easy. With a copy of the R Quick

Selection of suitable reference genes for RT-qPCR analyses in cyanobacteria.

Directory of Open Access Journals (Sweden)

Filipe Pinto

Full Text Available Cyanobacteria are a group of photosynthetic prokaryotes that have a diverse morphology, minimal nutritional requirements and metabolic plasticity that has made them attractive organisms to use in biotechnological applications. The use of these organisms as cell factories requires the knowledge of their physiology and metabolism at a systems level. For the quantification of gene transcripts real-time quantitative polymerase chain reaction (RT-qPCR is the standard technique. However, to obtain reliable RT-qPCR results the use and validation of reference genes is mandatory. Towards this goal we have selected and analyzed twelve candidate reference genes from three morphologically distinct cyanobacteria grown under routinely used laboratory conditions. The six genes exhibiting less variation in each organism were evaluated in terms of their expression stability using geNorm, NormFinder and BestKeeper. In addition, the minimum number of reference genes required for normalization was determined. Based on the three algorithms, we provide a list of genes for cyanobacterial RT-qPCR data normalization. To our knowledge, this is the first work on the validation of reference genes for cyanobacteria constituting a valuable starting point for future works.

Biosphere modelling for the assessment of radioactive waste repositories; the development of a common basis by the BIOMOVS II reference biospheres working group

International Nuclear Information System (INIS)

Dorp, F. van; Egan, M.; Kessler, J.H.; Nilsson, S.; Pinedo, P.; Smith, G.; Torres, C.

1998-01-01

Performance criteria for radioactive waste repositories are often expressed in terms of dose or risk. The characteristics of biosphere modelling for performance assessment are that: (a) potential release occurs in the distant future, (b) reliable predictions of human behaviour at the time of release are impracticable, and (c) the biosphere is not considered to be a barrier as the geosphere and the engineered barriers. For these and other reasons, differences have arisen in the approaches to biosphere modelling for repository dose and risk assessment. The BIOMOVS II Reference Biospheres Working Group has developed (a) a recommended methodology for biosphere model development, (b) a structured list of features, events and processes (FEPs) which the model should describe, and (c) an illustrative example of the recommended methodology. The Working Group has successfully tested the Interaction Matrix (or Rock Engineering Systems, RES) approach for developing conceptual models. The BIOMOVS II Working Groups on Reference Biospheres and Complementary Studies have laid the basis for considerable harmonisation in approaches to biosphere modelling of long term radionuclide releases. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

JDBC Pocket Reference

CERN Document Server

Bales, Donald

2003-01-01

JDBC--the Java Database Connectivity specification--is a complex set of application programming interfaces (APIs) that developers need to understand if they want their Java applications to work with databases. JDBC is so complex that even the most experienced developers need to refresh their memories from time to time on specific methods and details. But, practically speaking, who wants to stop and thumb through a weighty tutorial volume each time a question arises? The answer is the JDBC Pocket Reference, a data-packed quick reference that is both a time-saver and a lifesaver. The JDBC P

Global Reference Tables Services Architecture

Data.gov (United States)

Social Security Administration — This database stores the reference and transactional data used to provide a data-driven service access method to certain Global Reference Table (GRT) service tables.

Right-to-Work and Fair-Share Agreements: A Delicate Balance.

Science.gov (United States)

Russo, Charles J.

2002-01-01

Provides a brief background on the development of the concept of right-to-work statutes in the private sector under the National Labor Relations Act; reviews right-to-work statutes in public education and examines the status of fair-share agreements. (Contains 23 references.) (Author/PKP)

Choice of Reference Serum Creatinine in Defining Acute Kidney Injury.

Science.gov (United States)

Siew, Edward D; Matheny, Michael E

2015-01-01

The study of acute kidney injury (AKI) has expanded with the increasing availability of electronic health records and the use of standardized definitions. Understanding the impact of AKI between settings is limited by heterogeneity in the selection of reference creatinine to anchor the definition of AKI. In this mini-review, we discuss different approaches used to select reference creatinine and their relative merits and limitations. We reviewed the literature to obtain representative examples of published baseline creatinine definitions when pre-hospital data were not available, as well as literature evaluating the estimation of baseline renal function, using PubMed and reference back-tracing within known works. (1) Pre-hospital creatinine values are useful in determining reference creatinine, and in high-risk populations, the mean outpatient serum creatinine value 7-365 days before hospitalization closely approximates nephrology adjudication, (2) in patients without pre-hospital data, the eGFR 75 approach does not reliably estimate true AKI incidence in most at-risk populations, (3) using the lowest inpatient serum creatinine may be reasonable, especially in those with preserved kidney function, but may generously estimate AKI incidence and severity and miss community-acquired AKI that does not fully resolve, (4) using more specific definitions of AKI (e.g., KIDGO stages 2 and 3) may help to reduce the effects of misclassification when using surrogate values and (5) leveraging available clinical data may help refine the estimate of reference creatinine. Choosing reference creatinine for AKI calculation is important for AKI classification and study interpretation. We recommend obtaining data on pre-hospital kidney function, wherever possible. In studies where surrogate estimates are used, transparency in how they are applied and discussion that informs the reader of potential biases should be provided. Further work to refine the estimation of reference creatinine

Subjective cognitive complaints, psychosocial factors and nursing work function in nurses providing direct patient care.

Science.gov (United States)

Barbe, Tammy; Kimble, Laura P; Rubenstein, Cynthia

2018-04-01

The aim of this study was to examine relationships among subjective cognitive complaints, psychosocial factors and nursing work function in nurses providing direct patient care. Cognitive functioning is a critical component for nurses in the assurance of error prevention, identification and correction when caring for patients. Negative changes in nurses' cognitive and psychosocial functioning can adversely affect nursing care and patient outcomes. A descriptive correlational design with stratified random sampling. The sample included 96 nurses from the major geographic regions of the United States. Over 9 months in 2016-2017, data were collected using a web-based survey. Stepwise multiple linear regression analyses were used to examine relationships among subjective cognitive complaints, psychosocial factors and nursing work function. Overall, participants reported minimal work function impairment and low levels of subjective cognitive complaints, depression and stress. In multivariate analyses, depression was not associated with nurses' work function. However, perceived stress and subjective concerns about cognitive function were associated with greater impairment of work function. Nurses experiencing subjective cognitive complaints should be encouraged to address personal and environmental factors that are associated with their cognitive status. Additionally, stress reduction in nurses should be a high priority as a potential intervention to promote optimal functioning of nurses providing direct patient care. Healthcare institutions should integrate individual and institutional strategies to reduce factors contributing to workplace stress. © 2017 John Wiley & Sons Ltd.

Example Work Domain Analysis for a Reference Sodium Fast Reactor

Energy Technology Data Exchange (ETDEWEB)

Hugo, Jacques [Idaho National Lab. (INL), Idaho Falls, ID (United States); Oxstrand, Johanna [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-01-01

The nuclear industry is currently designing and building a new generation of reactors that will include different structural, functional, and environmental aspects, all of which are likely to have a significant impact on the way these plants are operated. In order to meet economic and safety objectives, these new reactors will all use advanced technologies to some extent, including new materials and advanced digital instrumentation and control systems. New technologies will affect not only operational strategies, but will also require a new approach to how functions are allocated to humans or machines to ensure optimal performance. Uncertainty about the effect of large scale changes in plant design will remain until sound technical bases are developed for new operational concepts and strategies. Up-to-date models and guidance are required for the development of operational concepts for complex socio-technical systems. This report describes how the classical Work Domain Analysis method was adapted to develop operational concept frameworks for new plants. This adaptation of the method is better able to deal with the uncertainty and incomplete information typical of first-of-a-kind designs. Practical examples are provided of the systematic application of the method in the operational analysis of sodium-cooled reactors. Insights from this application and its utility are reviewed and arguments for the formal adoption of Work Domain Analysis as a value-added part of the Systems Engineering process are presented.

Recent references

International Nuclear Information System (INIS)

Ramavataram, S.

1991-01-01

In support of a continuing program of systematic evaluation of nuclear structure data, the National Nuclear Data Center maintains a complete computer file of references to the nuclear physics literature. Each reference is tagged by a keyword string, which indicates the kinds of data contained in the article. This master file of Nuclear Structure References (NSR) contains complete keyword indexes to literature published since 1969, with partial indexing of older references. Any reader who finds errors in the keyword descriptions is urged to report them to the National Nuclear Data Center so that the master NSR file can be corrected. In 1966, the first collection of Recent References was published as a separate issue of Nuclear Data Sheets. Every four months since 1970, a similar indexed bibliography to new nuclear experiments has been prepared from additions to the NSR file and published. Beginning in 1978, Recent References was cumulated annually, with the third issue completely superseding the two issues previously published during a given year. Due to publication policy changes, cumulation of Recent Reference was discontinued in 1986. The volume and issue number of all the cumulative issues published to date are given. NNDC will continue to respond to individual requests for special bibliographies on nuclear physics topics, in addition to those easily obtained from Recent References. If the required information is available from the keyword string, a reference list can be prepared automatically from the computer files. This service can be provided on request, in exchange for the timely communication of new nuclear physics results (e.g., preprints). A current copy of the NSR file may also be obtained in a standard format on magnetic tape from NNDC. Requests for special searches of the NSR file may also be directed to the National Nuclear Data Center

Land-Use History and Contemporary Management Inform an Ecological Reference Model for Longleaf Pine Woodland Understory Plant Communities.

Energy Technology Data Exchange (ETDEWEB)

Brudvig, Lars A. [Department of Plant Biology, Michigan State University; Orrock, John L. [Department of Zoology, University of Wisconsin; Damschen, Ellen I. [Department of Zoology, University of Wisconsin; et al, et al

2014-01-23

of quantifying degraded states and provides a series of hypotheses for future experimental restoration work. More broadly, our work provides a framework for developing and evaluating reference models that incorporate multiple, interactive anthropogenic drivers of ecosystem degradation.

Land-Use History and Contemporary Management Inform an Ecological Reference Model for Longleaf Pine Woodland Understory Plant Communities

Science.gov (United States)

Brudvig, Lars A.; Orrock, John L.; Damschen, Ellen I.; Collins, Cathy D.; Hahn, Philip G.; Mattingly, W. Brett; Veldman, Joseph W.; Walker, Joan L.

2014-01-01

quantifying degraded states and provides a series of hypotheses for future experimental restoration work. More broadly, our work provides a framework for developing and evaluating reference models that incorporate multiple, interactive anthropogenic drivers of ecosystem degradation. PMID:24466167

Land-use history and contemporary management inform an ecological reference model for longleaf pine woodland understory plant communities.

Directory of Open Access Journals (Sweden)

Lars A Brudvig

the utility of quantifying degraded states and provides a series of hypotheses for future experimental restoration work. More broadly, our work provides a framework for developing and evaluating reference models that incorporate multiple, interactive anthropogenic drivers of ecosystem degradation.

AQCS intercomparison runs, reference materials 1991

International Nuclear Information System (INIS)

1991-01-01

The purpose of the Analytical Quality Control Services programme provided by the IAEA is to assist laboratories engaged in the analysis of nuclear, environmental, biological, and materials of marine origin for radionuclide, major, minor and trace elements, as well as stable isotopes using atomic and nuclear analytical techniques, to check the quality of their work. The determination of accuracy requires special procedures such as analysis to be carried out by as many different and independent methods, analysts and techniques as possible, control analysis with reference materials and participation in interlaboratory comparison studies. This document gives details of the specimens and samples which the IAEA intends to distribute in 1991. Tabs

Collaborative networks: Reference modeling

NARCIS (Netherlands)

Camarinha-Matos, L.M.; Afsarmanesh, H.

2008-01-01

Collaborative Networks: Reference Modeling works to establish a theoretical foundation for Collaborative Networks. Particular emphasis is put on modeling multiple facets of collaborative networks and establishing a comprehensive modeling framework that captures and structures diverse perspectives of

Weather Test Reference Year of Greenland

DEFF Research Database (Denmark)

Kragh, Jesper; Pedersen, Frank; Svendsen, Svend

2005-01-01

the construction of two test reference years of Greenland used in the work of establishing new energy frame for the coming building code of Greenland. The first test reference year is constructed using measurements of climatic parameters from the town Nuuk located in the southwestern part of Greenland. The second...... test reference year is constructed using measurements from the town Uummannaq located in the north part of Greenland on the west coast. The construction of the test reference years fulfills the procedures described in the standard EN ISO 15927-4 using the following main weather parameters: Dry bulb...... temperature, global radiation, relative humidity and mean wind speed. To construct the test reference years a program called REFYEAR was developed in MatLab. REFYEAR automatically constructs the test reference year using an input file containing the climatic measurements. The two constructed test reference...

Gatekeepers as Care Providers: The Care Work of Patient-centered Medical Home Clerical Staff.

Science.gov (United States)

Solimeo, Samantha L; Ono, Sarah S; Stewart, Kenda R; Lampman, Michelle A; Rosenthal, Gary E; Stewart, Greg L

2017-03-01

International implementation of the patient-centered medical home (PCMH) model for delivering primary care has dramatically increased in the last decade. A majority of research on PCMH's impact has emphasized the care provided by clinically trained staff. In this article, we report our ethnographic analysis of data collected from Department of Veterans Affairs staff implementing PACT, the VA version of PCMH. Teams were trained to use within-team delegation, largely accomplished through attention to clinical licensure, to differentiate staff in providing efficient, patient-centered care. In doing so, PACT may reinforce a clinically defined culture of care that countermands PCMH ideals. Such competing rubrics for care are brought into relief through a focus on the care work performed by clerks. Ethnographic analysis identifies clerks' care as a kind of emotional dirty work, signaling important areas for future anthropological study of the relationships among patient-centered care, stigma, and clinical authority. © 2016 by the American Anthropological Association.

Interactions: A Study of Office Reference Statistics

Directory of Open Access Journals (Sweden)

Naomi Lederer

2012-06-01

Full Text Available Objective – The purpose of this study was to analyze the data from a referencestatistics-gathering mechanism at Colorado State University (CSU Libraries. It aimedprimarily to better understand patron behaviours, particularly in an academic librarywith no reference desk.Methods – The researchers examined data from 2007 to 2010 of College LiaisonLibrarians’ consultations with patrons. Data were analyzed by various criteria,including patron type, contact method, and time spent with the patron. Theinformation was examined in the aggregate, meaning all librarians combined, andthen specifically from the Liberal Arts and Business subject areas.Results – The researchers found that the number of librarian reference consultationsis substantial. Referrals to librarians from CSU’s Morgan Library’s one public servicedesk have declined over time. The researchers also found that graduate students arethe primary patrons and email is the preferred contact method overall.Conclusion – The researchers found that interactions with patrons in librarians’ offices – either in person or virtually – remain substantial even without a traditional reference desk. The data suggest that librarians’ efforts at marketing themselves to departments, colleges, and patrons have been successful. This study will be of value to reference, subject specialist, and public service librarians, and library administrators as they consider ways to quantify their work, not only for administrative purposes, but in order to follow trends and provide services and staffing accordingly.

Work-related stress and reward: an Australian study of multidisciplinary pediatric oncology healthcare providers.

Science.gov (United States)

Bowden, M J; Mukherjee, S; Williams, L K; DeGraves, S; Jackson, M; McCarthy, M C

2015-11-01

Managing staff stress and preventing long-term burnout in oncology staff are highly important for both staff and patient well-being. Research addressing work-related stress in adult oncology is well documented; however, less is known about this topic in the pediatric context. This study examined sources of work-related stress and reward specific to multidisciplinary staff working in pediatric oncology in Australia. Participants were 107 pediatric oncology clinicians, including medical, nursing, and allied health staff from two Australian pediatric oncology centers. Participants completed an online survey using two newly developed measures: the work stressors scale-pediatric oncology and the work rewards scale-pediatric oncology. The most commonly reported sources of both stress and reward are related to patient care and interactions with children. Results indicated that levels of work-related stress and reward were similar between the professional disciplines and between the two hospitals. Regression analyses revealed no demographic or organizational factors that were associated with either stress or reward. Work-related stress and reward are not mutually exclusive; particular situations and events can be simultaneously stressful and rewarding for healthcare providers. Although patient care and interactions with children was found to be the most stressful aspect of working in this speciality, it was also the greatest source of reward. Results are discussed in relation to workplace approaches to staff well-being and stress reduction. Copyright © 2015 John Wiley & Sons, Ltd.

Indirect methods for reference interval determination - review and recommendations.

Science.gov (United States)

Jones, Graham R D; Haeckel, Rainer; Loh, Tze Ping; Sikaris, Ken; Streichert, Thomas; Katayev, Alex; Barth, Julian H; Ozarda, Yesim

2018-04-19

Reference intervals are a vital part of the information supplied by clinical laboratories to support interpretation of numerical pathology results such as are produced in clinical chemistry and hematology laboratories. The traditional method for establishing reference intervals, known as the direct approach, is based on collecting samples from members of a preselected reference population, making the measurements and then determining the intervals. An alternative approach is to perform analysis of results generated as part of routine pathology testing and using appropriate statistical techniques to determine reference intervals. This is known as the indirect approach. This paper from a working group of the International Federation of Clinical Chemistry (IFCC) Committee on Reference Intervals and Decision Limits (C-RIDL) aims to summarize current thinking on indirect approaches to reference intervals. The indirect approach has some major potential advantages compared with direct methods. The processes are faster, cheaper and do not involve patient inconvenience, discomfort or the risks associated with generating new patient health information. Indirect methods also use the same preanalytical and analytical techniques used for patient management and can provide very large numbers for assessment. Limitations to the indirect methods include possible effects of diseased subpopulations on the derived interval. The IFCC C-RIDL aims to encourage the use of indirect methods to establish and verify reference intervals, to promote publication of such intervals with clear explanation of the process used and also to support the development of improved statistical techniques for these studies.

Age-differentiated work systems

CERN Document Server

Frieling, Ekkehart; Wegge, Jürgen

2013-01-01

The disproportionate aging of the population of working age in many nations around the world is a unique occurrence in the history of humankind. In the light of demographic change, it is becoming increasingly important to develop and use the potential of older employees. This edited volume Age-differentiated Work Systems provides a final report on a six-year priority program funded by the German Research Foundation (DFG) and presents selected research findings of 17 interdisciplinary project teams. The idea is that it will serve both as a reference book and overview of the current state of research in ergonomics, occupational psychology and related disciplines. It provides new models, methods, and procedures for analyzing and designing age-differentiated work systems with the aim of supporting subject matter experts from different areas in their decisions on labor and employment policies. Therefore over 40 laboratory experiments involving 2,000 participants and 50 field studies involving over 25,000 employees...

Writing More Informative Letters of Reference

OpenAIRE

Wright, Scott M; Ziegelstein, Roy C

2004-01-01

Writing a meaningful and valuable letter of reference is not an easy task. Several factors influence the quality of any letter of reference. First, the accuracy and reliability of the writer's impressions and judgment depend on how well he knows the individual being described. Second, the writer's frame of reference, which is determined by the number of persons at the same level that he has worked with, will impact the context and significance of his beliefs and estimations. Third, the letter...

Precision Tiltmeter as a Reference for Slope MeasuringInstruments

Energy Technology Data Exchange (ETDEWEB)

Kirschman, Jonathan L.; Domning, Edward E.; Morrison, Gregory Y.; Smith, Brian V.; Yashchuk, Valeriy V.

2007-08-01

The next generation of synchrotrons and free electron lasers require extremely high-performance x-ray optical systems for proper focusing. The necessary optics cannot be fabricated without the use of precise optical metrology instrumentation. In particular, the Long Trace Profiler (LTP) based on the pencil-beam interferometer is a valuable tool for low-spatial-frequency slope measurement with x-ray optics. The limitations of such a device are set by the amount of systematic errors and noise. A significant improvement of LTP performance was the addition of an optical reference channel, which allowed to partially account for systematic errors associated with wiggling and wobbling of the LTP carriage. However, the optical reference is affected by changing optical path length, non-homogeneous optics, and air turbulence. In the present work, we experimentally investigate the questions related to the use of a precision tiltmeter as a reference channel. Dependence of the tiltmeter performance on horizontal acceleration, temperature drift, motion regime, and kinematical scheme of the translation stage has been investigated. It is shown that at an appropriate experimental arrangement, the tiltmeter provides a slope reference for the LTP system with accuracy on the level of 0.1 {micro}rad (rms).

Precision Tiltmeter as a Reference for Slope Measuring Instruments

International Nuclear Information System (INIS)

Kirschman, Jonathan L.; Domning, Edward E.; Morrison, Gregory Y.; Smith, Brian V.; Yashchuk, Valeriy V.

2007-01-01

The next generation of synchrotrons and free electron lasers require extremely high-performance x-ray optical systems for proper focusing. The necessary optics cannot be fabricated without the use of precise optical metrology instrumentation. In particular, the Long Trace Profiler (LTP) based on the pencil-beam interferometer is a valuable tool for low-spatial-frequency slope measurement with x-ray optics. The limitations of such a device are set by the amount of systematic errors and noise. A significant improvement of LTP performance was the addition of an optical reference channel, which allowed to partially account for systematic errors associated with wiggling and wobbling of the LTP carriage. However, the optical reference is affected by changing optical path length, non-homogeneous optics, and air turbulence. In the present work, we experimentally investigate the questions related to the use of a precision tiltmeter as a reference channel. Dependence of the tiltmeter performance on horizontal acceleration, temperature drift, motion regime, and kinematical scheme of the translation stage has been investigated. It is shown that at an appropriate experimental arrangement, the tiltmeter provides a slope reference for the LTP system with accuracy on the level of 0.1 (micro)rad (rms)

Handbook of reference electrodes

CERN Document Server

Inzelt, György; Scholz, Fritz

2013-01-01

Reference Electrodes are a crucial part of any electrochemical system, yet an up-to-date and comprehensive handbook is long overdue. Here, an experienced team of electrochemists provides an in-depth source of information and data for the proper choice and construction of reference electrodes. This includes all kinds of applications such as aqueous and non-aqueous solutions, ionic liquids, glass melts, solid electrolyte systems, and membrane electrodes. Advanced technologies such as miniaturized, conducting-polymer-based, screen-printed or disposable reference electrodes are also covered. Essen

Reference Mission Version 3.0 Addendum to the Human Exploration of Mars: The Reference Mission of the NASA Mars Exploration Study Team. Addendum; 3.0

Science.gov (United States)

Drake, Bret G. (Editor)

1998-01-01

This Addendum to the Mars Reference Mission was developed as a companion document to the NASA Special Publication 6107, "Human Exploration of Mars: The Reference Mission of the NASA Mars Exploration Study Team." It summarizes changes and updates to the Mars Reference Missions that were developed by the Exploration Office since the final draft of SP 6107 was printed in early 1999. The Reference Mission is a tool used by the exploration community to compare and evaluate approaches to mission and system concepts that could be used for human missions to Mars. It is intended to identify and clarify system drivers, significant sources of cost, performance, risk, and schedule variation. Several alternative scenarios, employing different technical approaches to solving mission and technology challenges, are discussed in this Addendum. Comparing alternative approaches provides the basis for continual improvement to technology investment plan and a general understanding of future human missions to Mars. The Addendum represents a snapshot of work in progress in support of planning for future human exploration missions through May 1998.

Work process, performance and professional profile of a Hearing Health Network: reference for satisfaction.

Science.gov (United States)

Escarce, Andrezza Gonzalez; Lemos, Stela Maris Aguiar; Carvalho, Sirley Alves da Silva

2016-01-01

To analyze the correlation between the satisfaction of professionals from the Hearing Health Care network in two micro-regions of Minas Gerais state and the sociodemographic profile, work process, and work performance in the health service. This is a cross-sectional, observational, analytic study with a non-probabilistic sample including 34 professionals from the Hearing Health Care services. Data collection occurred through individual interviews in the municipality of professional practice. Associations between the Professional Satisfaction variable and the explanatory variables Sociodemographic Data, Work Routine, and Developed Actions were conducted. Professionals with graduate studies were more satisfied with the human resources policy and the activities developed, whereas health civil servants showed more satisfaction with the wage policy and the work schedule. The correlation analysis between work process and satisfaction revealed a moderate positive correlation between items such as Health Promotion Actions, Satisfaction with Diagnostic Equipment, and Satisfaction with Maintenance Equipment. The present study revealed a higher level of satisfaction among professionals with graduate studies (human resources policy and activities developed) and civil servants (wage policy and work schedule). The relevance of this study lies on the important role that health professionals play on the Health Care Network. Additionally, the study of satisfaction level can provide a search for improvements, considering that satisfied professionals not only improve service quality, but also show greater creativity, commitment, and performance.

Environmental Change in Post-closure Safety Assessment of Solid Radioactive Waste Repositories. Report of Working Group 3 Reference Models for Waste Disposal of EMRAS II Topical Heading Reference Approaches for Human Dose Assessment. Environmental Modelling for Radiation Safety (EMRAS II) Programme

International Nuclear Information System (INIS)

2016-08-01

Environmental assessment models are used for evaluating the radiological impact of actual and potential releases of radionuclides to the environment. They are essential tools for use in the regulatory control of routine discharges to the environment and also in planning measures to be taken in the event of accidental releases. They are also used for predicting the impact of releases which may occur far into the future, for example, from underground radioactive waste repositories. It is important to verify, to the extent possible, the reliability of the predictions of such models by a comparison with measured values in the environment or with predictions of other models. The IAEA has been organizing programmes of international model testing since the 1980s. These programmes have contributed to a general improvement in models, in the transfer of data and in the capabilities of modellers in Member States. IAEA publications on this subject over the past three decades demonstrate the comprehensive nature of the programmes and record the associated advances which have been made. From 2009 to 2011, the IAEA organized a programme entitled Environmental Modelling for Radiation Safety (EMRAS II), which concentrated on the improvement of environmental transfer models and the development of reference approaches to estimate the radiological impacts on humans, as well as on flora and fauna, arising from radionuclides in the environment. Different aspects were addressed by nine working groups covering three themes: reference approaches for human dose assessment, reference approaches for biota dose assessment and approaches for assessing emergency situations. This publication describes the work of the Reference Models for Waste Disposal Working Group

2002 reference document

International Nuclear Information System (INIS)

2002-01-01

This 2002 reference document of the group Areva, provides information on the society. Organized in seven chapters, it presents the persons responsible for the reference document and for auditing the financial statements, information pertaining to the transaction, general information on the company and share capital, information on company operation, changes and future prospects, assets, financial position, financial performance, information on company management and executive board and supervisory board, recent developments and future prospects. (A.L.B.)

A Review of Information and Communication Technology Enhanced Social Work Interventions

Science.gov (United States)

Chan, Chitat; Holosko, Michael J.

2016-01-01

Objectives: Information and communications technology (ICT) has impacted almost all human service disciplines and currently is evolving in social work. This study provides a systematic review of ICT-enhanced social work interventions, with particular reference to their intervention fidelity (IF), validity, and the role of ICT in the helping…

Generation of Referring Expressions: Assessing the Incremental Algorithm

Science.gov (United States)

van Deemter, Kees; Gatt, Albert; van der Sluis, Ielka; Power, Richard

2012-01-01

A substantial amount of recent work in natural language generation has focused on the generation of "one-shot" referring expressions whose only aim is to identify a target referent. Dale and Reiter's Incremental Algorithm (IA) is often thought to be the best algorithm for maximizing the similarity to referring expressions produced by people. We…

Developing primary care in Hong Kong: evidence into practice and the development of reference frameworks.

Science.gov (United States)

Griffiths, Sian M; Lee, Jeff P M

2012-10-01

Enhancing primary care is one of the proposals put forward in the Healthcare Reform Consultation Document "Your Health, Your Life" issued in March 2008. In 2009, the Working Group on Primary Care, chaired by the Secretary for Food and Health, recommended the development of age-group and disease-specific primary care conceptual models and reference frameworks. Drawing on international experience and best evidence, the Task Force on Conceptual Model and Preventive Protocols of the Working Group on Primary Care has developed two reference frameworks for the management of two common chronic diseases in Hong Kong, namely diabetes and hypertension, in primary care settings. Adopting a population approach for the prevention and control of diabetes and hypertension across the life course, the reference frameworks aim to provide evidence-based and appropriate recommendations for the provision of continuing and comprehensive care for patients with chronic diseases in the community.

Hazardous Solvent Substitution Data System reference manual

International Nuclear Information System (INIS)

Branham-Haar, K.A.; Twitchell, K.E.

1993-07-01

Concern for the environment, in addition to Federal regulation, mandate the replacement of hazardous solvents with safer cleaning agents. Manufacturers are working to produce these replacement solvents. As these products are developed, potential users need to be informed of their availability. To promote the use of these new products instead of traditional solvents, the Idaho National Engineering Laboratory (INEL) has developed the Hazardous Solvent Substitution Data System (HSSDS). The HSSDS provides a comprehensive system of information on alternatives to hazardous solvents and related subjects, and it makes that information available to solvent users, industrial hygienists, and process engineers. The HSSDS uses TOPIC reg-sign, a text retrieval system produced by Verity, Inc., to allow a user to search for information on a particular subject. TOPIC reg-sign produces a listing of the retrieved documents and allows the use to examine the documents individually and to use the information contained in them. This reference manual does not replace the comprehensive TOPIC reg-sign user documentation (available from Verity, Inc.), or the HSSDS Tutorial (available from the INEL). The purpose of this reference manual is to provide enough instruction on TOPIC reg-sign so the user may begin accessing the data contained in the HSSDS

Reference in human and non-human primate communication: What does it take to refer?

Science.gov (United States)

Sievers, Christine; Gruber, Thibaud

2016-07-01

The concept of functional reference has been used to isolate potentially referential vocal signals in animal communication. However, its relatedness to the phenomenon of reference in human language has recently been brought into question. While some researchers have suggested abandoning the concept of functional reference altogether, others advocate a revision of its definition to include contextual cues that play a role in signal production and perception. Empirical and theoretical work on functional reference has also put much emphasis on how the receiver understands the referential signal. However, reference, as defined in the linguistic literature, is an action of the producer, and therefore, any definition describing reference in non-human animals must also focus on the producer. To successfully determine whether a signal is used to refer, we suggest an approach from the field of pragmatics, taking a closer look at specific situations of signal production, specifically at the factors that influence the production of a signal by an individual. We define the concept of signaller's reference to identify intentional acts of reference produced by a signaller independently of the communicative modality, and illustrate it with a case study of the hoo vocalizations produced by wild chimpanzees during travel. This novel framework introduces an intentional approach to referentiality. It may therefore permit a closer comparison of human and non-human animal referential behaviour and underlying cognitive processes, allowing us to identify what may have emerged solely in the human lineage.

Reduced ability to work both before and after infectious spondylodiscitis in working-age patients

DEFF Research Database (Denmark)

Kehrer, Michala; Hallas, Jesper; Bælum, Jesper

2017-01-01

BACKGROUND: As little is known about the ability to work in patients with infectious spondylodiscitis, we compared the relation between the workforce before infection with that of a reference population and described the patients' ability to work after infection including predictors of return...... to work (RTW). METHODS: We identified all patients aged 20-57 years treated for infectious spondylodiscitis January 1994-May 2009 at hospitals in Funen County, Denmark. The work status of each week from 2 years before until 2 years after index date was compared with that of a reference population. Time...... before infection compared with a reference population and infection further lowered their ability to RTW....

Sign languages and the Common European Framework of Reference for Languages : Descriptors and approaches to assessment

NARCIS (Netherlands)

L. Leeson; Dr. Beppie van den Bogaerde; Tobias Haug; C. Rathmann

2015-01-01

This resource establishes European standards for sign languages for professional purposes in line with the Common European Framework of Reference for Languages (CEFR) and provides an overview of assessment descriptors and approaches. Drawing on preliminary work undertaken in adapting the CEFR to

The paradox of compassionate work: a mixed-methods study of satisfying and fatiguing experiences of animal health care providers.

Science.gov (United States)

Polachek, Alicia J; Wallace, Jean E

2018-03-01

Compassionate work appears paradoxical as it may provide great rewards, but may also come at great costs to care providers. This paper explores the paradox of compassionate work by examining what interactions contribute to compassion satisfaction and what interactions contribute to compassion fatigue. This mixed-methods, cross-sectional study uses qualitative interview data from animal health care providers (N = 20) to identify work interactions that they find satisfying or stressful. Quantitative survey data (N = 572) are used to test hypotheses generated from the interviews regarding predictors of compassion satisfaction and compassion fatigue. Interview transcripts were analyzed using a directed content analysis approach. Survey data were analyzed using ordinary least squares regression. The results highlight the complex nature of compassionate work. As hypothesized, making a difference to animals and building relationships with animal patients and human clients relate to greater compassion satisfaction. Human client barriers to animal care and witnessing client grief relate to greater compassion fatigue, as predicted. None of the predictors relate to less compassion fatigue, but forming relationships with animal patients relates to both greater compassion satisfaction and compassion fatigue. This paper enhances our understanding of provider-client-patient interactions and highlights the paradox of compassionate work.

Mental Health Care Providers' Views of Their Work with Consumers and Their Reports of Recovery-Orientation, Job Satisfaction, and Personal Growth.

Science.gov (United States)

Osborn, Lawrence A; Stein, Catherine H

2016-10-01

The research examined the role of mental health care providers' perceptions of their professional relationships with consumers in understanding their reports of agency recovery-oriented services and their own sense of job satisfaction and personal growth. Multidisciplinary community mental health care providers (N = 105) responded to an online self-report questionnaire. Providers' reports of higher levels of working alliance and greater provider directiveness in working with consumers was significantly related to providers' reports of higher levels of agency recovery-orientation and higher levels of personal growth. Providers' reports of working alliance accounted for the largest proportion of variance in providers' reports of job satisfaction. Mental health providers' perceptions of relationships with consumers are central to understanding providers' views of agency recovery-orientation and sense of professional and personal well-being.

Equal work for unequal pay: the gender reimbursement gap for healthcare providers in the United States.

Science.gov (United States)

Desai, Tejas; Ali, Sadeem; Fang, Xiangming; Thompson, Wanda; Jawa, Pankaj; Vachharajani, Tushar

2016-10-01

Gender disparities in income continue to exist, and many studies have quantified the gap between male and female workers. These studies paint an incomplete picture of gender income disparity because of their reliance on notoriously inaccurate or incomplete surveys. We quantified gender reimbursement disparity between female and male healthcare providers using objective, non-self-reported data and attempted to adjust the disparity against commonly held beliefs as to why it exists. We analysed over three million publicly available Medicare reimbursement claims for calendar year 2012 and compared the reimbursements received by male and female healthcare providers in 13 medical specialties. We adjusted these reimbursement totals against how hard providers worked, how productive each provider was, and their level of experience. We calculated a reimbursement differential between male and female providers by primary medical specialty. The overall adjusted reimbursement differential against female providers was -US$18 677.23 (95% CI -US$19 301.94 to -US$18 052.53). All 13 specialties displayed a negative reimbursement differential against female providers. Only two specialties had reimbursement differentials that were not statistically significant. After adjustment for how hard a physician works, his/her years of experience and his/her productivity, female healthcare providers are still reimbursed less than male providers. Using objective, non-survey data will provide a more accurate understanding of this reimbursement inequity and perhaps lead the medical profession (as a whole) towards a solution that can reverse this decades-old injustice. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Toward Optimal Decision Making among Vulnerable Patients Referred for Cardiac Surgery: A Qualitative Analysis of Patient and Provider Perspectives.

Science.gov (United States)

Gainer, Ryan A; Curran, Janet; Buth, Karen J; David, Jennie G; Légaré, Jean-Francois; Hirsch, Gregory M

2017-07-01

Comprehension of risks, benefits, and alternative treatment options has been shown to be poor among patients referred for cardiac interventions. Patients' values and preferences are rarely explicitly sought. An increasing proportion of frail and older patients are undergoing complex cardiac surgical procedures with increased risk of both mortality and prolonged institutional care. We sought input from patients and caregivers to determine the optimal approach to decision making in this vulnerable patient population. Focus groups were held with both providers and former patients. Three focus groups were convened for Coronary Artery Bypass Graft (CABG), Valve, or CABG +Valve patients ≥ 70 y old (2-y post-op, ≤ 8-wk post-op, complicated post-op course) (n = 15). Three focus groups were convened for Intermediate Medical Care Unit (IMCU) nurses, Intensive Care Unit (ICU) nurses, surgeons, anesthesiologists and cardiac intensivists (n = 20). We used a semi-structured interview format to ask questions surrounding the informed consent process. Transcribed audio data was analyzed to develop consistent and comprehensive themes. We identified 5 main themes that influence the decision making process: educational barriers, educational facilitators, patient autonomy and perceived autonomy, patient and family expectations of care, and decision making advocates. All themes were influenced by time constraints experienced in the current consent process. Patient groups expressed a desire to receive information earlier in their care to allow time to identify personal values and preferences in developing plans for treatment. Both groups strongly supported a formal approach for shared decision making with a decisional coach to provide information and facilitate communication with the care team. Identifying the barriers and facilitators to patient and caretaker engagement in decision making is a key step in the development of a structured, patient-centered SDM approach. Intervention

Team dynamics, clinical work satisfaction, and patient care coordination between primary care providers: A mixed methods study.

Science.gov (United States)

Song, Hummy; Ryan, Molly; Tendulkar, Shalini; Fisher, Josephine; Martin, Julia; Peters, Antoinette S; Frolkis, Joseph P; Rosenthal, Meredith B; Chien, Alyna T; Singer, Sara J

Team-based care is essential for delivering high-quality, comprehensive, and coordinated care. Despite considerable research about the effects of team-based care on patient outcomes, few studies have examined how team dynamics relate to provider outcomes. The aim of this study was to examine relationships among team dynamics, primary care provider (PCP) clinical work satisfaction, and patient care coordination between PCPs in 18 Harvard-affiliated primary care practices participating in Harvard's Academic Innovations Collaborative. First, we administered a cross-sectional survey to all 548 PCPs (267 attending clinicians, 281 resident physicians) working at participating practices; 65% responded. We assessed the relationship of team dynamics with PCPs' clinical work satisfaction and perception of patient care coordination between PCPs, respectively, and the potential mediating effect of patient care coordination on the relationship between team dynamics and work satisfaction. In addition, we embedded a qualitative evaluation within the quantitative evaluation to achieve a convergent mixed methods design to help us better understand our findings and illuminate relationships among key variables. Better team dynamics were positively associated with clinical work satisfaction and quality of patient care coordination between PCPs. Coordination partially mediated the relationship between team dynamics and satisfaction for attending clinicians, suggesting that higher satisfaction depends, in part, on better teamwork, yielding more coordinated patient care. We found no mediating effects for resident physicians. Qualitative results suggest that sources of satisfaction from positive team dynamics for PCPs may be most relevant to attending clinicians. Improving primary care team dynamics could improve clinical work satisfaction among PCPs and patient care coordination between PCPs. In addition to improving outcomes that directly concern health care providers, efforts to

Performance of Models in Radiological Impact Assessment for Normal Operation. Report of Working Group 1 Reference Methodologies for Controlling Discharges of Routine Releases of EMRAS II Topical Heading Reference Approaches for Human Dose Assessment. Environmental Modelling for Radiation Safety (EMRAS II) Programme

International Nuclear Information System (INIS)

2017-01-01

This publication provides the results from Working Group 1, on Reference Methodologies for Controlling Discharges of Routine Releases, of the IAEA’s EMRAS II (Environmental Modelling for Radiation Safety) programme, which ran from 2009 to 2011. This Working Group carried out an intercomparison of methods used for assessing radiological impacts to people and the environment due to authorized releases of radionuclides during normal operation of nuclear facilities. Three important types of exposure scenarios were considered, those related to atmospheric, marine and river releases. The publication describes the details of the hypothetical radioactive release scenarios, the environmental pathways considered, the environmental transfer models applied, the calculation methods and the results obtained. An analysis of the results and the main findings and conclusions relevant for the use of the described input data and methodologies in regulatory applications is included. The publication also presents considerations on selection of the ‘representative person’ and a summary of the different approaches in some States for the regulatory control of radioactive discharges. Input data is included in the annex.

Mobility-based Time References for Wireless Sensor Networks

CERN Document Server

Sebastiano, Fabio; Makinwa, Kofi A A

2013-01-01

 This book describes the use of low-power low-cost and extremely small radios to provide essential time reference for wireless sensor networks.  The authors explain how to integrate such radios in a standard CMOS process to reduce both cost and size, while focusing on the challenge of designing a fully integrated time reference for such radios. To enable the integration of the time reference, system techniques are proposed and analyzed, several kinds of integrated time references are reviewed, and mobility-based references are identified as viable candidates to provide the required accuracy at low-power consumption. Practical implementations of a mobility-based oscillator and a temperature sensor are also presented, which demonstrate the required accuracy over a wide temperature range, while drawing 51-uW from a 1.2-V supply in a 65-nm CMOS process. Provides system analysis to understand requirements for time/frequency accuracy in wireless sensor networks; Describes system optimization for time references i...

Análise do trabalho de referência em Centros de Atenção Psicossocial Análisis del trabajo de referencia en Centros de Atención Psicosocial Analysis of reference work in Psychosocial Care Centers

Directory of Open Access Journals (Sweden)

Lilian Miranda

2008-10-01

referencia, y el sufrimiento del trabajador, que se puede sentir excesivamente responsabilizado por el caso de referencia. CONCLUSIONES: Los efectos del arreglo equipo/profesionales de referencia sobre los pacientes se basan en aspectos emocionales unidos a la confianza, la constancia y a la integridad de cuidados. Sin embargo, tales aspectos también presentaron problemas de relación, principalmente con la omnipotencia, que puede envolver el trabajador.OBJECTIVE: To analyze how psychosocial care center users, family members and workers assess related work by reference team and professionals. METHODS: Qualitative research based on Constructivist Paradigm and Gadamerian Hermeneutics. Two cycles of focus groups consisting of professionals, users and users' family members from all psychosocial care centers in the city of Campinas (Southeastern Brazil, in 2006, were analyzed. RESULTS: Reference work was assessed as an arrangement that has therapeutic effects and contributes to the work organization efficacy. However, risks related to power centralized by reference professionals and to workers' suffering, as these may feel overly responsible for the case they are reference for, were reported. CONCLUSIONS: The effects of the "reference team/professionals" arrangement on patients are based on emotional aspects associated with reliability, constancy and integrality of care. In contrast, such aspects also show relationship problems, especially as regards omnipotence, which may involve the worker.

Nordic reference study on uncertainty and sensitivity analysis

International Nuclear Information System (INIS)

Hirschberg, S.; Jacobsson, P.; Pulkkinen, U.; Porn, K.

1989-01-01

This paper provides a review of the first phase of Nordic reference study on uncertainty and sensitivity analysis. The main objective of this study is to use experiences form previous Nordic Benchmark Exercises and reference studies concerning critical modeling issues such as common cause failures and human interactions, and to demonstrate the impact of associated uncertainties on the uncertainty of the investigated accident sequence. This has been done independently by three working groups which used different approaches to modeling and to uncertainty analysis. The estimated uncertainty interval for the analyzed accident sequence is large. Also the discrepancies between the groups are substantial but can be explained. Sensitivity analyses which have been carried out concern e.g. use of different CCF-quantification models, alternative handling of CCF-data, time windows for operator actions and time dependences in phase mission operation, impact of state-of-knowledge dependences and ranking of dominating uncertainty contributors. Specific findings with respect to these issues are summarized in the paper

S. R. Ranganathan's Theory of Reference Service.

Science.gov (United States)

Varghese, Manoj M.

A study of S. R. Ranganathan's theory of reference service is undertaken by using an historical methodology. It was evident from the literature review that Ranganathan had established that reference service was the most important work and served as the hub of all library practices. There were six factors that were repeatedly considered by…

Providing rehabilitation online - invisible work and diagnostic agents.

Science.gov (United States)

Bødker, Malene; Juul Nielsen, Annegrete

2015-01-01

Telecare promises to deliver healthcare services more efficiently while, at the same time, improving the quality of care. The purpose of this paper is to challenge these promises by analysing the implications of introducing telecare in the rehabilitation of patients suffering from chronic obstructive pulmonary disease. Empirically, the paper is based on interviews with and observations of rehabilitation therapists and patients taking part in a Danish telerehabilitation programme. Theoretically, the paper draws on Science and Technology Studies. The introduction of telecare alters rehabilitation practices in multiple ways. First, several new time-consuming work routines, carried out in collaboration between therapists, patients and technical professions, emerge. Although crucial in establishing and maintaining telerehabilitation infrastructures, this work remains invisible in evaluations of the programme. Second, rather than simply increasing patient agency, responsibilities are redistributed and negotiated in subtle and non-uniform ways. These negotiations make it less transparent where one responsibility begins and where another potentially conflicting one ends. Evaluations of telecare technologies should pay more attention to work- and responsibility-related effects of introducing telecare in order better to account for predicted and unpredicted as well as desirable and undesirable socio-technical changes. Using an ethnographic approach, the paper points to the discrepancy between simplistic political promises that telecare technologies can serve as tools for improvement, on the one hand, and the substantial changes in the organisation and management of healthcare observed in practice, on the other. Rather than regarding telecare as technologies of improvement, it is more productive to regard them as technologies of change.

An Overview of Work Life Balance of Employees Across the Sectors – with Reference to Indian Context

OpenAIRE

K.Karthick

2017-01-01

Work is an integral part of our everyday life, as it is our livelihood or career. Working community tend to spend twelve hours daily in the work place, that is one third of their entire life. As an outcome, it does influence the overall quality of our life. Understanding the importance of the Cruz, successful organizations have taken initiatives to support and provide facilities to their employees to help them to balance the scales. In this process, organizations are coming up with new and in...

Working Together for Mental Health: Evaluation of a one-day mental health course for human service providers

Science.gov (United States)

Grootemaat, Pam; Gillan, Cathie; Holt, Gillian; Forward, Wayne; Heywood, Narelle; Willis, Sue

2006-01-01

Background The Working Together For Mental Health course is an 8-hour course designed to demystify mental illness and mental health services. The main target group for the course is people working in human service organisations who provide services for people with mental illness. Methods A questionnaire was administered to all participants attending the course during 2003 (n = 165). Participants completed the questionnaire before and immediately after the course, and at three month follow-up. Results A response rate of 69% was achieved with 114 people completing the questionnaire on all three occasions. The responses showed a significant improvement in the self-assessed knowledge and confidence of participants to provide human services to people with a mental health problem or disorder, three months after the course. There was no significant improvement in participants' attitudes or beliefs about people with a mental health problem or disorder at three month follow-up; however, participants' attitudes were largely positive before entering the course. Conclusion The Working Together For Mental Health course was successful in improving participants' confidence and knowledge around providing human services to people with a mental health illness. PMID:17074097

Reference Value Advisor: a new freeware set of macroinstructions to calculate reference intervals with Microsoft Excel.

Science.gov (United States)

Geffré, Anne; Concordet, Didier; Braun, Jean-Pierre; Trumel, Catherine

2011-03-01

International recommendations for determination of reference intervals have been recently updated, especially for small reference sample groups, and use of the robust method and Box-Cox transformation is now recommended. Unfortunately, these methods are not included in most software programs used for data analysis by clinical laboratories. We have created a set of macroinstructions, named Reference Value Advisor, for use in Microsoft Excel to calculate reference limits applying different methods. For any series of data, Reference Value Advisor calculates reference limits (with 90% confidence intervals [CI]) using a nonparametric method when n≥40 and by parametric and robust methods from native and Box-Cox transformed values; tests normality of distributions using the Anderson-Darling test and outliers using Tukey and Dixon-Reed tests; displays the distribution of values in dot plots and histograms and constructs Q-Q plots for visual inspection of normality; and provides minimal guidelines in the form of comments based on international recommendations. The critical steps in determination of reference intervals are correct selection of as many reference individuals as possible and analysis of specimens in controlled preanalytical and analytical conditions. Computing tools cannot compensate for flaws in selection and size of the reference sample group and handling and analysis of samples. However, if those steps are performed properly, Reference Value Advisor, available as freeware at http://www.biostat.envt.fr/spip/spip.php?article63, permits rapid assessment and comparison of results calculated using different methods, including currently unavailable methods. This allows for selection of the most appropriate method, especially as the program provides the CI of limits. It should be useful in veterinary clinical pathology when only small reference sample groups are available. ©2011 American Society for Veterinary Clinical Pathology.

Metaphorical Singular Reference. The Role of Enriched Composition in Reference Resolution

Directory of Open Access Journals (Sweden)

Anne Bezuidenhout

2008-08-01

Full Text Available It is widely accepted that, in the course of interpreting a metaphorical utterance, both literal and metaphorical interpretations of the utterance are available to the interpreter, although there may be disagreement about the order in which these interpretations are accessed. I call this the dual availability assumption. I argue that it does not apply in cases of metaphorical singular reference. These are cases in which proper names, complex demonstratives or definite descriptions are used metaphorically; e.g., ‘That festering sore must go’, referring to a derelict house. We are forced to give up dual availability in these cases because a process of predicate transfer happens in the restriction clauses of such metaphorically used definite phrases (DPs, so that a denotation-less definite concept is never constructed. A process of enriched composition yields only a metaphorical referent/denotation. I compare cases of metaphorical reference both to cases of metonymic reference and to uses of epithets of the ‘That N of an N’ form. Reflection on the former is helpful in getting clear about the kind of property transfer involved in referential metaphors. Such transfer happens directly at the level of properties and is not mediated via a correspondence between objects, as is the case with metonymic reference. Reflection on epithets such as ‘that festering sore of a house’ is helpful since these are a sort of intermediate case between cases of literal and metaphorical reference. They provide support for my claim that in cases of metaphorical reference there is only a single referent (the metaphorical one. Moreover, constraints on the use of these epithets suggest that referential metaphors are similarly constrained. In particular, I argue that referential metaphors can only be used when the implicit category restriction (e.g., house in the case of the example ‘That festering sore must go’ is highly salient, and that the evaluative

The Spallation Neutron Source RF Reference System

CERN Document Server

Piller, Maurice; Crofford, Mark; Doolittle, Lawrence; Ma, Hengjie

2005-01-01

The Spallation Neutron Source (SNS) RF Reference System includes the master oscillator (MO), local oscillator(LO) distribution, and Reference RF distribution systems. Coherent low noise Reference RF signals provide the ability to control the phase relationships between the fields in the front-end and linear accelerator (linac) RF cavity structures. The SNS RF Reference System requirements, implementation details, and performance are discussed.

The preparation and analysis of minerals for use as reference material

International Nuclear Information System (INIS)

Stoch, H.

1976-01-01

This report covers the progress made in the collection of the material for reference samples, and the five interlaboratory analytical programmes (ferrochromium slags, fluorspar, 'mixed' NIMROC samples, rare earths, and ferromanganese slags). The description of the internal analytical programme has been subdivided into eight main categories, and a comprehensive list of evaluated results covering a wide range of materials is included. Additional results for thorium, rare earths, tin, tantalum, and niobium for the appropriate reference samples are included in updated tables. The main purpose in the preparation of these samples is to provide control samples for analytical work at the National Institute for Metallurgy. Where there is a special need, limited quantities of the samples can be made available to other laboratories

Evaluation of new reference genes in papaya for accurate transcript normalization under different experimental conditions.

Directory of Open Access Journals (Sweden)

Xiaoyang Zhu

Full Text Available Real-time reverse transcription PCR (RT-qPCR is a preferred method for rapid and accurate quantification of gene expression studies. Appropriate application of RT-qPCR requires accurate normalization though the use of reference genes. As no single reference gene is universally suitable for all experiments, thus reference gene(s validation under different experimental conditions is crucial for RT-qPCR analysis. To date, only a few studies on reference genes have been done in other plants but none in papaya. In the present work, we selected 21 candidate reference genes, and evaluated their expression stability in 246 papaya fruit samples using three algorithms, geNorm, NormFinder and RefFinder. The samples consisted of 13 sets collected under different experimental conditions, including various tissues, different storage temperatures, different cultivars, developmental stages, postharvest ripening, modified atmosphere packaging, 1-methylcyclopropene (1-MCP treatment, hot water treatment, biotic stress and hormone treatment. Our results demonstrated that expression stability varied greatly between reference genes and that different suitable reference gene(s or combination of reference genes for normalization should be validated according to the experimental conditions. In general, the internal reference genes EIF (Eukaryotic initiation factor 4A, TBP1 (TATA binding protein 1 and TBP2 (TATA binding protein 2 genes had a good performance under most experimental conditions, whereas the most widely present used reference genes, ACTIN (Actin 2, 18S rRNA (18S ribosomal RNA and GAPDH (Glyceraldehyde-3-phosphate dehydrogenase were not suitable in many experimental conditions. In addition, two commonly used programs, geNorm and Normfinder, were proved sufficient for the validation. This work provides the first systematic analysis for the selection of superior reference genes for accurate transcript normalization in papaya under different experimental

Genetics Home Reference

Science.gov (United States)

... Page Search Home Health Conditions Genes Chromosomes & mtDNA Resources Help Me Understand Genetics Share: Email Facebook Twitter Genetics Home Reference provides consumer-friendly information about the effects of genetic variation on human health. Health Conditions More than 1,200 health ...

An Opportunity for Healing and Holistic Care: Exploring the Roles of Health Care Providers Working Within Northern Canadian Aboriginal Communities.

Science.gov (United States)

Rahaman, Zaida; Holmes, Dave; Chartrand, Larry

2016-05-22

The purpose of this qualitative study was exploring what the roles and challenges of health care providers working within Northern Canadian Aboriginal communities are and what resources can help support or impede their efforts in working toward addressing health inequities within these communities. The qualitative research conducted was influenced by a postcolonial epistemology. The works of theorists Fanon on colonization and racial construction, Kristeva on semiotics and abjection, and Foucault on power/knowledge, governmentality, and biopower were used in providing a theoretical framework. Critical discourse analysis of 25 semistructured interviews with health care providers was used to gain a better understanding of their roles and challenges while working within Northern Canadian Aboriginal communities. Within this research study, three significant findings emerged from the data. First, the Aboriginal person's identity was constructed in relation to the health care provider's role of delivering essential health services. Second, health care providers were not treating the "ill" patient, but rather treating the patient for being "ill." Third, health care providers were treating the Aboriginal person for being "Aboriginal" by separating the patient from his or her identity. The treatment involved reforming the Aboriginal patient from the condition of being "Aboriginal." © The Author(s) 2016.

Citing the innovative work of the original inventors

DEFF Research Database (Denmark)

Frandsen, Tove Faber

2017-01-01

between equally relevant references. Only rules of thumb exist, and this paper provides an overview of the scarce publications within the area. One well-known rule of thumb is to cite seminal work. Method. This study analyses the extent to which seminal papers are being cited more or less than more recent...

Recruiter Perceptions of Information that Employment References Should Provide to Assist in Making Selection Decisions

Science.gov (United States)

Evuleocha, Stevina U.; Ugbah, Steve D.; Law, Sweety

2009-01-01

Authors investigated perceptions of campus recruiters (N = 168) in the San Francisco Bay Area regarding the importance of 15 types of information they solicit from job applicants' references in making selection decisions. Results suggest campus recruiters should consider 10 types of information to assist them in making selection decisions. Results…

Perl Pocket Reference

CERN Document Server

Vromans, Johan

2011-01-01

If you have a Perl programming question, you'll find the answer quickly in this handy, easy-to-use quick reference. The Perl Pocket Reference condenses and organizes stacks of documentation down to the most essential facts, so you can find what you need in a heartbeat. Updated for Perl 5.14, the 5th edition provides a summary of Perl syntax rules and a complete list of operators, built-in functions, and other features. It's the perfect companion to O'Reilly's authoritative and in-depth Perl programming books, including Learning Perl, Programming Perl, and the Perl Cookbook..

Provider perceptions of the social work environment and the state of pediatric care in a downsized urban public academic medical center.

Science.gov (United States)

Tataw, David Besong

2011-05-01

The author's purpose through this study was to document and analyze health provider perceptions of their social work environment and the state of pediatric care at Los Angeles County King/Drew Hospital and Medical Center in 2000, after the restructuring and downsizing of the hospital and its community clinics. The research results showed nurses and physicians reporting that both the quality of pediatric care and the provider social work environment were poor. Negative factors in the social work environment included: low employee morale, poorly staffed clinical teams, lack of professional autonomy, perceptions of low quality of care for pediatric patients, and interpersonal issues of poor communication and collaboration among providers. Providers also perceived a non-supportive work environment, sense of powerlessness, poor quality of work, lack of goal clarity from leadership, lack of fairness in leadership behavior, and an organizational leadership that is abandoning its core mission and values, thereby making it difficult for providers to carry out their professional functions. The author's findings in this study suggest a relationship between intra-role conflict, social employment environment and quality of care at King/Drew Medical Center in 2000. Lessons for practice are presented.

Providing support to doctors working in intensive care

LENUS (Irish Health Repository)

Murphy, JFA

2012-05-01

‘Jading’ is a process of exhaustion in which apathy and cynicism replace the drive to be responsive and caring. ‘Burnout’ a term first coined in the psychology literature in 1974 was based on Graham Greene’s novel ‘A Burnt-Out Case1. It is the umbrella description for disengagement in the workplace setting characterised by withdrawal, denial and inefficiency. There is an alienation from the pressures of work. Marshall and Kasman2 defined it as ‘the loss of motivation for creative thought’. It is the opposite of engagement which is associated with energy and optimism. People who experience all 3 symptoms- emotional exhaustion, negative attitude towards patients, reduced sense of personal accomplishment- have the greatest degree of burnout. It doesn’t get better by being ignored. These processes have serious consequences for the individual involved and the hospital that they work in. The doctor underperforms and the Unit becomes dysfunctional There is decreased quality of care, increased absenteeism, and high staff turnover. There is an inability to make decisions and a failure to set priorities.

Jane Austen's (1775-1817) references to headache: fact and fiction.

Science.gov (United States)

Larner, A J

2010-11-01

References to headache in Jane Austen's works, both fictional and non-fictional, and in biographical works undertaken by Austen family members have been collated. These multiple references suggest that Jane Austen used headache as a narrative device to reflect not only physiological bodily processes but also psychological states, possibly based on her own experience of headache and that of female relations and acquaintances.

Preparation and characterization of the fish reference material

International Nuclear Information System (INIS)

Ulrich, Joao Cristiano

2011-01-01

The certified reference materials (CRMs) play an important role in obtaining measurement results traceable to the International System of Units, through an unbroken chain of comparisons. Thus, the demand for new certified reference materials (CRMs) increases every day in all areas of knowledge. The availability of reference materials, mainly in Brazil is still incipient, given that the demand far exceeds the available variety of these materials. The amount of certified reference materials available in the country is insufficient to meet the need of the scientific community and demands for development of new methodologies. Among the many areas in need of reference materials, we highlight the importance for the food trade balance for these products within the country. The certification of food products, intended both for export and for domestic consumption, requires analysis methods that provide precise and accurate results to ensure product quality. This paper describes the preparation and certification of a reference material in the fish matrix in mercury and methylmercury. The study brings together since the stage of material selection, preparation, development of homogeneity and stability studies and characterization. The certification was performed by means of measurements using two analytical techniques, flow injection analysis - cold vapor atomic absorption spectrometry (FIA-CV-AAS) and isotope dilution applied to mass spectrometry (IDMS), which is a primary method. In this work the standards of the ISO 30 (ABNT 30-34) and ISO Guide 35 was used as the basis for the preparation and characterization of the material. For the calculation of uncertainties was used the GUM and Eurachem guide. As a result, was produced and certified a lot of material in relation to the concentration of mercury (Hg = 0.271 ± 0.057 mg g -1 ) and methylmercury (MeHg = 0.245 ± 0.038 mg g -1 ), and informational values of lead and arsenic. (author)

Sizewell 'B' PWR reference design

International Nuclear Information System (INIS)

1982-04-01

The reference design for a PWR power station to be constructed as Sizewell 'B' is presented in 3 volumes containing 14 chapters and in a volume of drawings. The report describes the proposed design and provides the basis upon which the safety case and the Pre-Construction Safety Report have been prepared. The station is based on a 3425MWt Westinghouse PWR providing steam to two turbine generators each of 600 MW. The layout and many of the systems are based on the SNUPPS design for Callaway which has been chosen as the US reference plant for the project. (U.K.)

Reference sources for radionuclide calibrations in nuclear programmes

International Nuclear Information System (INIS)

Almeida, M.C.M. de; Delgado, J.U.; Poledna, R.; Silva, R.L. da; Oliveira, E.M. de; Di Prinzio, M.A.R.

2009-01-01

The radionuclide metrology laboratories aim to provide radioactive standards for detector calibrations in nuclear safety areas. To produce the reference sources to be furnished to users the following standards of 57 Co, 60 Co, 133 Ba, 241 Am, 152 Eu and 166 Ho are commonly used. In this work was made a verifying of the uncertainties obtained for the two methods: comparative (sample-standards) and efficiency curve. The total uncertainties obtained by sample-standard method varied from 0.4 to 1.2% (k = 1). The results using efficiency curve method to the same radioisotopes and same conditions are between 0.9 to 2.2% (k = 1). (author)

Standard digital reference images for titanium castings

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 The digital reference images provided in the adjunct to this standard illustrate various types and degrees of discontinuities occurring in titanium castings. Use of this standard for the specification or grading of castings requires procurement of the adjunct digital reference images, which illustrate the discontinuity types and severity levels. They are intended to provide the following: 1.1.1 A guide enabling recognition of titanium casting discontinuities and their differentiation both as to type and degree through digital radiographic examination. 1.1.2 Example digital radiographic illustrations of discontinuities and a nomenclature for reference in acceptance standards, specifications and drawings. 1.2 The digital reference images consist of seventeen digital files each illustrating eight grades of increasing severity. The files illustrate seven common discontinuity types representing casting sections up to 1-in. (25.4-mm). 1.3 The reference radiographs were developed for casting sections up to 1...

Selected Reference Books of 1969-1970

Science.gov (United States)

Sheehy, Eugene P.

1971-01-01

The purpose of this list is to present a selection of recent scholarly and foreign works of interest to reference workers in university libraries. It is neither well balanced nor comprehensive. (Author/NH)

Selected Reference Books of 1992.

Science.gov (United States)

McIlvaine, Eileen

1993-01-01

Presents an annotated bibliography of 40 recent scholarly and general works of interest to reference workers in university libraries. Topics areas covered include philosophy, religion, language, literature, architecture, economics, law, area studies, Russia and the Soviet Union, women's studies, and Christopher Columbus. New editions and…

A Reference Architecture for a Cloud-Based Tools as a Service Workspace

DEFF Research Database (Denmark)

Chauhan, Aufeef; Babar, Muhammad Ali; Sheng, Quan Z.

2015-01-01

Software Architecture (SA) plays a critical role in developing and evolving cloud-based applications. We present a Reference Architecture (RA) for designing Cloud-based Tools as a service work SPACE (TSPACE) - a platform for provisioning chain of tools following the Software as a Service (SaaS...... evaluate the RA in terms of completeness and feasibility. Our proposed RA can provide valuable guidance and insights for designing and implementing concrete software architectures of TSPACE....

Burnout: Interpreting the perception of Iranian primary rural health care providers from working and organizational conditions

Directory of Open Access Journals (Sweden)

Mahrokh Keshvari

2012-01-01

Results: During the content analysis process, six themes were obtained; "instability and frequent changes", "involved in laws and regulations", "pressure and stress due to unbalanced workload and manpower", "helplessness in performing the tasks and duties", "sense of identity threat and low self-concept", and "deprivation of professional development". The mentioned themes indicate a main and more important theme called "burnout". Conclusions: Health services providers in the rural health centers are working in stressful and challenging work conditions and are suffered from deprivation of something for which are responsible to the community.

NBS activities in biological reference materials

Energy Technology Data Exchange (ETDEWEB)

Rasberry, S.D.

1988-12-01

NBS activities in biological reference materials during 1986-1988 are described with a preview of plans for future certifications of reference materials. During the period, work has been completed or partially completed on about 40 reference materials of importance to health, nutrition, and environmental quality. Some of the reference materials that have been completed during the period and are described include: creatinine (SRM 914a), bovine serum albumin (SRM 927a), cholesterol in human serum (SRM's 1951-1952), aspartate aminotransferase (RM 8430), cholesterol and fat-soluble vitamins in coconut oil (SRM 1563), wheat flour (SRM 1567a), rice flour (SRM 1568a), mixed diet (RM 8431a), dinitropyrene isomers and 1-nitropyrene (SRM 1596), and complex PAH's from coal tar (SRM 1597). Oyster tissue (SRM 1566a) is being analyzed and should be available in 1988.

History of Shock Waves, Explosions and Impact A Chronological and Biographical Reference

CERN Document Server

Krehl, Peter O. K

2009-01-01

This unique and encyclopedic reference work charts the evolution of the physics of shock waves and detonations from the earliest investigations into percussion and impact phenomena right up to the most recent groundbreaking research in the field. The history of this long and complex process is first reviewed in a general survey that encompasses everything from the earliest observations and interpretations of puzzling high-rate dynamic phenomena associated with natural and man-made explosions to a discussion of the merits of modern numerical computer simulations. The subject is then treated in more detail and in chronological order in the central section of the book, while also being richly illustrated in form of a picture gallery. The bibliographic index provides 122 short biographies of eminent researchers who have contributed to the field. Further references for biographical sources are given, and both name and subject indices (with over 4500 and 2700 entries, respectively) are provided. "This book is of tr...

Interim report on reference biospheres for radioactive waste disposal

International Nuclear Information System (INIS)

Dorp, F. van

1994-10-01

significant effect on biosphere modelling, for normal and accidental releases from nuclear installations, and also for waste disposal. For example, increased attention is being given to natural and semi-natural environments. Against this background, the primary objective of the BIOMOVS II Reference Biospheres Working Group is to establish a consensus on the development and application of a Reference Biosphere approach to the evaluation of long-term radiological consequences of solid radioactive waste disposal systems. The Working Group is expecting to provide: 1. A recommended methodology for biosphere analysis within the assessment of radioactive waste disposal, which is consistent for different types of radioactive waste and disposal concepts. This should include the justification, arguments and documentation for all the steps in the recommended methodology. A preliminary illustration of the approach is shown in the figure opposite. 2. An internationally developed and structured list of Features, Events and Processes (FEPs), which can be used to support the development of biosphere models for specific assessments. 3. Example(s) of how to apply the methodology. If these examples are developed in a suitably generic assessment context, they can be defined as generic 'Reference Biospheres' and their applicability and limitations should be identified. Such 'Reference Biospheres' could then be used e.g: a) for generic site independent evaluation of disposal plans; b) to provide sets of factors to convert geosphere release into doses or risks; c) as 'stylised biospheres' (which might be defined as a biosphere which contains only the most essential FEPs); d) as benchmarks for comparisons with other assessments, and e) as sources of detailed information on biosphere modelling for waste disposal assessments. In order to complete an assessment of a particular site, there will not only be a need to take account of site specific issues, such as the geosphere-biosphere interface and the

Reference Japanese man

International Nuclear Information System (INIS)

Tanaka, Giichiro

1985-01-01

To make real and accurate dose assessment method so far, it is necessitated to provide ''Reference Japanese Man'' based on anotomical, physiological and biochemical data of Japanese people instead of the Reference Man presented in ICRP Publications 23 and 30. This review describes present status of researched for the purpose of establishing of Reference Japanese Man. The Reference Japanese Man is defined as a male or female adult who lives in Japan with a Japanese life-style and food custom. His stature and body weight, and the other data was decided as mean values of male or female people of Japan. As for food custom, Japanese people take significantly smaller amount of meat and milk products than Western people, while larger intake amount of cereals and marine products such as fish or seaweeds. Weight of organs is a principal factor for internal dose assessment and mean values for living Japanese adult has been investigated and the value employable for dose assessment for organs and tissues are shown. To employ these values of Reference Japanese Man, it should be taken into account of age. Metabolic parameters should also be considered. Iodine metabolism in Japanese is quite different from that of Western people. The above-mentioned data are now tentatively employing in modification of table of MIRD method and others. (Takagi, S.)

Reference calculations on critical assemblies with Apollo2 code working with a fine multigroup mesh; Calculs de reference avec un maillage multigroupe fin sur des assemblages critiques par Apollo2

Energy Technology Data Exchange (ETDEWEB)

Aggery, A

1999-12-01

The objective of this thesis is to add to the multigroup transport code APOLLO2 the capability to perform deterministic reference calculations, for any type of reactor, using a very fine energy mesh of several thousand groups. This new reference tool allows us to validate the self-shielding model used in industrial applications, to perform depletion calculations, differential effects calculations, critical buckling calculations or to evaluate precisely data required by the self shielding model. At its origin, APOLLO2 was designed to perform routine calculations with energy meshes around one hundred groups. That is why, in the current format of cross sections libraries, almost each value of the multigroup energy transfer matrix is stored. As this format is not convenient for a high number of groups (concerning memory size), we had to search out a new format for removal matrices and consequently to modify the code. In the new format we found, only some values of removal matrices are kept (these values depend on a reconstruction precision choice), the other ones being reconstructed by a linear interpolation, what reduces the size of these matrices. Then we had to show that APOLLO2 working with a fine multigroup mesh had the capability to perform reference calculations on any assembly geometry. For that, we successfully carried out the validation with several calculations for which we compared APOLLO2 results (obtained with the universal mesh of 11276 groups) to results obtained with Monte Carlo codes (MCNP, TRIPOLI4). Physical analysis led with this new tool have been very fruitful and show a great potential for such an R and D tool. (author)

Thermal radiation transfer calculations in combustion fields using the SLW model coupled with a modified reference approach

Science.gov (United States)

Darbandi, Masoud; Abrar, Bagher

2018-01-01

The spectral-line weighted-sum-of-gray-gases (SLW) model is considered as a modern global model, which can be used in predicting the thermal radiation heat transfer within the combustion fields. The past SLW model users have mostly employed the reference approach to calculate the local values of gray gases' absorption coefficient. This classical reference approach assumes that the absorption spectra of gases at different thermodynamic conditions are scalable with the absorption spectrum of gas at a reference thermodynamic state in the domain. However, this assumption cannot be reasonable in combustion fields, where the gas temperature is very different from the reference temperature. Consequently, the results of SLW model incorporated with the classical reference approach, say the classical SLW method, are highly sensitive to the reference temperature magnitude in non-isothermal combustion fields. To lessen this sensitivity, the current work combines the SLW model with a modified reference approach, which is a particular one among the eight possible reference approach forms reported recently by Solovjov, et al. [DOI: 10.1016/j.jqsrt.2017.01.034, 2017]. The combination is called "modified SLW method". This work shows that the modified reference approach can provide more accurate total emissivity calculation than the classical reference approach if it is coupled with the SLW method. This would be particularly helpful for more accurate calculation of radiation transfer in highly non-isothermal combustion fields. To approve this, we use both the classical and modified SLW methods and calculate the radiation transfer in such fields. It is shown that the modified SLW method can almost eliminate the sensitivity of achieved results to the chosen reference temperature in treating highly non-isothermal combustion fields.

Errorless learning for training individuals with schizophrenia at a community mental health setting providing work experience.

Science.gov (United States)

Kern, Robert S; Liberman, Robert P; Becker, Deborah R; Drake, Robert E; Sugar, Catherine A; Green, Michael F

2009-07-01

The effects of errorless learning (EL) on work performance, tenure, and personal well-being were compared with conventional job training in a community mental health fellowship club offering 12-week time-limited work experience. Participants were 40 clinically stable schizophrenia and schizoaffective disorder outpatients randomly assigned to EL vs conventional instruction (CI) at a thrift-type clothing store. EL participants received training on how to perform their assigned job tasks based on principles of EL, such as error reduction and automation of task performance. CI participants received training common to other community-based entry-level jobs that included verbal instruction, a visual demonstration, independent practice, and corrective feedback. Participants were scheduled to work 2 hours per week for 12 weeks. For both groups, job training occurred during the first 2 weeks at the worksite. Work performance (assessed using the Work Behavior Inventory, WBI) and personal well-being (self-esteem, job satisfaction, and work stress) were assessed at weeks 2, 4, and 12. Job tenure was defined as the number of weeks on the job or total number of hours worked prior to quitting or study end. The EL group performed better than the CI group on the Work Quality Scale from the WBI, and the group differences were relatively consistent over time. Results from the survival analyses of job tenure revealed a non-significant trend favoring EL. There were no group differences on self-esteem, job satisfaction, or work stress. The findings provide modest support for the extensions of EL to community settings for enhancing work performance.

The Association between Emotion Work Balance and Relationship Satisfaction of Couples Seeking Therapy.

Science.gov (United States)

Holm, Kristen E.; Werner-Wilson, Ronald J.; Cook, Alicia S.; Berger, Peggy S.

2001-01-01

Emotion work refers to efforts made to enhance emotional well being and provide emotional support in a relationship. Data were collected from 63 couples seeking therapy to determine the relation between emotion work balance and relationship satisfaction. Results indicate both men and women are most satisfied with their relationship when levels of…

Ignition delay time measurements of primary reference fuel blends

KAUST Repository

Alabbad, Mohammed

2017-02-07

Ignition delay times of four different primary reference fuels (PRF), mixtures of n-heptane and iso-octane, were measured behind reflected shock waves in a high-pressure shock tube facility. The PRFs were formulated to match the RON of two high-octane gasolines (RON 95 and 91) and two prospective low-octane naphtha fuels (RON 80 and 70). Experiments were carried out over a wide range of temperatures (700–1200K), pressures (10, 20, and 40bar) and equivalence ratios (0.5 and 1). Kinetic modeling predictions from four chemical kinetic mechanisms are compared with the experimental data. Ignition delay correlations are developed to reproduce the measured ignition delay times. Brute force sensitivity analyses are carried out to identify reactions that affect ignition delay times at specific temperature, pressure and equivalence ratio. The large experimental data set provided in the current work will serve as a benchmark for the validation of chemical kinetic mechanisms of primary reference fuel blends.

Ignition delay time measurements of primary reference fuel blends

KAUST Repository

Alabbad, Mohammed; Javed, Tamour; Khaled, Fathi; Badra, Jihad; Farooq, Aamir

2017-01-01

Ignition delay times of four different primary reference fuels (PRF), mixtures of n-heptane and iso-octane, were measured behind reflected shock waves in a high-pressure shock tube facility. The PRFs were formulated to match the RON of two high-octane gasolines (RON 95 and 91) and two prospective low-octane naphtha fuels (RON 80 and 70). Experiments were carried out over a wide range of temperatures (700–1200K), pressures (10, 20, and 40bar) and equivalence ratios (0.5 and 1). Kinetic modeling predictions from four chemical kinetic mechanisms are compared with the experimental data. Ignition delay correlations are developed to reproduce the measured ignition delay times. Brute force sensitivity analyses are carried out to identify reactions that affect ignition delay times at specific temperature, pressure and equivalence ratio. The large experimental data set provided in the current work will serve as a benchmark for the validation of chemical kinetic mechanisms of primary reference fuel blends.

Soiled-based uranium disequilibrium and mixed uranium-thorium series radionuclide reference materials

International Nuclear Information System (INIS)

Donivan, S.; Chessmore, R.

1988-12-01

The US Department of Energy (DOE) Office of Remedial Action and Waste Technology has assigned the Technical Measurements Center (TMC), located at the DOE Grand Junction Colorado, Projects Office and operated by UNC Geotech (UNC), the task of supporting ongoing remedial action programs by providing both technical guidance and assistance in making the various measurements required in all phases of remedial action work. Pursuant to this task, the Technical Measurements Center prepared two sets of radionuclide reference materials for use by remedial action contractors and cognizant federal and state agencies. A total of six reference materials, two sets comprising three reference materials each, were prepared with varying concentrations of radionuclides using mill tailings materials, ores, and a river-bottom soil diluent. One set (disequilibrium set) contains varying amounts of uranium with nominal amounts of radium-226. The other set (mixed-nuclide set) contains varying amounts of uranium-238 and thorium-232 decay series nuclides. 14 refs., 10 tabs

Reference Structures: Stagnation, Progress, and Future Challenges.

Science.gov (United States)

Greenberg, Jane

1997-01-01

Assesses the current state of reference structures in online public access catalogs (OPACs) in a framework defined by stagnation, progress, and future challenges. Outlines six areas for reference structure development. Twenty figures provide illustrations. (AEF)

[Reference values for erythrocyte cholinesterase activity in the working population of Antioquia, Colombia, according to the Michel and EQM techniques].

Science.gov (United States)

Carmona-Fonseca, Jaime

2003-11-01

To establish reference values for erythrocyte cholinesterase (EC 3.1.1.7) activity for the active working population of two regions of the department of Antioquia, Colombia, that are located at different altitudes above sea level. We took representative samples from populations of active working persons 18 to 59 years old from two regions in the department of Antioquia: (1) the Aburrá Valley (1 540 m above sea level) and (2) the near east of the department (2 150 m above sea level). We excluded workers who were using cholinesterase-inhibiting substances in their work or at home, those who had a disease that altered their cholinesterase levels, and those who said they were not in good health. We measured the erythrocyte cholinesterase activity using two methods: (1) the Michel method and (2) the EQM method (EQM Research, Cincinnati, Ohio, United States of America). We carried out the measurements with 827 people, 415 from the Aburrá Valley and 412 from the near east region. We compared proportions using the chi-square test and Fisher's exact test. We utilized the Student's t test for independent samples to compare two averages. To simultaneously compare three or more averages, analysis of variance was used, followed by the Newman-Keuls multiple-range test. When the variables were not normally distributed or when the variances were not homogeneous, Kruskal-Wallis nonparametric analysis of variance was used to compare the medians. Three computer software programs were used in the statistical analysis: SPSS 9.0, SGPlus 7.1, and Epi Info 6.04. In all the statistical tests the level of significance was set at P EQM method was 35.21 U/g hemoglobin (95% CI: 34.82 to 35.60). With the Michel method: (1) the enzymatic activity differed significantly between the two regions, according to the Newman-Keuls test; (2) within each region, the enzymatic activity was significantly higher among males than among females, according to the Newman-Keuls test; and (3) in none of the

Quasi-reference electrodes in confined electrochemical cells can result in in situ production of metallic nanoparticles.

Science.gov (United States)

Perera, Rukshan T; Rosenstein, Jacob K

2018-01-31

Nanoscale working electrodes and miniaturized electroanalytical devices are valuable platforms to probe molecular phenomena and perform chemical analyses. However, the inherent close distance of metallic electrodes integrated into a small volume of electrolyte can complicate classical electroanalytical techniques. In this study, we use a scanning nanopipette contact probe as a model miniaturized electrochemical cell to demonstrate measurable side effects of the reaction occurring at a quasi-reference electrode. We provide evidence for in situ generation of nanoparticles in the absence of any electroactive species and we critically analyze the origin, nucleation, dissolution and dynamic behavior of these nanoparticles as they appear at the working electrode. It is crucial to recognize the implications of using quasi-reference electrodes in confined electrochemical cells, in order to accurately interpret the results of nanoscale electrochemical experiments.

Basic anatomical and physiological data for use in radiological protection: reference values ICRP Publication 89

International Nuclear Information System (INIS)

Valentin, J.

2002-01-01

This report presents detailed information on age- and gender-related differences in the anatomical and physiological characteristics of reference individuals. These reference values provide needed input to prospective dosimetry calculations for radiation protection purposes for both workers and members of the general public. The purpose of this report is to consolidate and unify in one publication, important new information on reference anatomical and physiological values that has become available since Publication 23 was published by the ICRP in 1975. There are two aspects of this work. The first is to revise and extend the information in Publication 23 as appropriate. The second is to provide additional information on individual variation among grossly normal individuals resulting from differences in age, gender, race, or other factors. This publication collects, unifies, and expands the updated ICRP reference values for the purpose of providing a comprehensive and consistent set of age- and gender-specific reference values for anatomical and physiological features of the human body pertinent to radiation dosimetry. The reference values given in this report are based on: (a) anatomical and physiological information not published before by the ICRP; (b) recent ICRP publications containing reference value information; and (c) information in Publication 23 that is still considered valid and appropriate for radiation protection purposes. Moving from the past emphasis on 'Reference Man', the new report presents a series of reference values for both male and female subjects of six different ages: newborn, 1 year, 5 years, 10 years, 15 years, and adult. In selecting reference values, the Commission has used data on Western Europeans and North Americans because these populations have been well studied with respect to anatomy, body composition, and physiology. When appropriate, comparisons are made between the chosen reference values and data from several Asian

Basic anatomical and physiological data for use in radiological protection: reference values ICRP Publication 89

Energy Technology Data Exchange (ETDEWEB)

Valentin, J

2002-12-01

This report presents detailed information on age- and gender-related differences in the anatomical and physiological characteristics of reference individuals. These reference values provide needed input to prospective dosimetry calculations for radiation protection purposes for both workers and members of the general public. The purpose of this report is to consolidate and unify in one publication, important new information on reference anatomical and physiological values that has become available since Publication 23 was published by the ICRP in 1975. There are two aspects of this work. The first is to revise and extend the information in Publication 23 as appropriate. The second is to provide additional information on individual variation among grossly normal individuals resulting from differences in age, gender, race, or other factors. This publication collects, unifies, and expands the updated ICRP reference values for the purpose of providing a comprehensive and consistent set of age- and gender-specific reference values for anatomical and physiological features of the human body pertinent to radiation dosimetry. The reference values given in this report are based on: (a) anatomical and physiological information not published before by the ICRP; (b) recent ICRP publications containing reference value information; and (c) information in Publication 23 that is still considered valid and appropriate for radiation protection purposes. Moving from the past emphasis on 'Reference Man', the new report presents a series of reference values for both male and female subjects of six different ages: newborn, 1 year, 5 years, 10 years, 15 years, and adult. In selecting reference values, the Commission has used data on Western Europeans and North Americans because these populations have been well studied with respect to anatomy, body composition, and physiology. When appropriate, comparisons are made between the chosen reference values and data from several Asian

PROVIDING OF SAFETY AT WORKS IMPLEMENTATION ON RECONSTRUCTION OF PLUMBINGS NETWORKS IN THE STRAITENED TERMS

Directory of Open Access Journals (Sweden)

DIDENKO L. M.

2016-07-01

Full Text Available Summary. Raising of problem. In all regions of our country plumbings networks have a considerable physical and moral wear, because in the majority they were laid in the middle of the last century. It is known that more than 50 % on-the-road pipelines are made from steel, here middle tenure of employment of metallic pipes for plumbings networks makes 30. [1]. Statistical data testify that more than 34 % plumbings and sewage networks are in the emergency state. Thus, a large enough stake in building industry of Ukraine is on works on the reconstruction of this type of engineering networks. Thus complete replacement of all pipes requires heavy material tolls, a reconstruction and major repairs of separate emergency areas are mainly produced on this account. Logically to assert that providing of safe production of the examined type of works becomes complicated by the presence of harmful and dangerous productive factors arising up due to the complex factor of straitened. This factor is stipulated by that plumbings networks are laid within the limits of folded municipal building and on territory of operating industrial enterprises. About the danger of production of works on a reconstruction the high level of traumatism testifies at their production. According to the law of Ukraine "On a labour (item 13 protection", an employer is under an obligation to create in the workplace the terms of labour accordingly normatively - to the legal acts, requirements of legislation on the observance of rights of workers in area of labour protection. [2] Providing of safety at implementation of works on the reconstruction of plumbings networks, maybe only at the complex going near the study of this problem, that plugs in itself: research of influence of factors of straitened; exposure of features of technology of production building, assembling, breaking-down, earthen and other types of works executable on a site area at a reconstruction; perfection of existent

Valores de referência para carboxiemoglobina Reference values for carboxyhemoglobin

Directory of Open Access Journals (Sweden)

Maria Elisa P. B. de Siqueira

1997-12-01

Full Text Available INTRODUÇÃO: Os valores de referência de indicadores biológicos são utilizados como parâmetros para interpretação de resultados de valores obtidos em indivíduos expostos ocupacionalmente aos agentes químicos. O Grupo Brasileiro para Estabelecimento dos Valores de Referência tem se dedicado a estas determinações objetivando estabelecer valores de referência para os diferentes bioindicadores em diversas regiões do País. Determinaram-se os valores de referência para a carboxiemoglobina (COHb no Sul de Minas Gerais. MATERIAL E MÉTODO: A COHb foi analisada pelo método espectrofométrico, otimizado no laboratório de análises toxicológicas. Em todas as amostras também foram realizadas análises de alguns parâmetros bioquímicos e hematológicos para atestar o estado de saúde da população, constituída de 200 voluntários não-fumantes e não-expostos, por motivo profissional, ao monóxido de carbono. Cada indivíduo respondeu um questionário para levantamento de dados relevantes à interpretação dos resultados. Os valores de referência foram expressos em termos da média ± desvio-padrão, intervalo de confiança 95% e valor de referência superior. A distribuição estatística dos resultados obtidos foi realizada para possibilitar sua comparação com grupos de trabalhadores, preferentemente à avaliação individual. RESULTADOS E CONCLUSÕES: O valor médio ± desvio-padrão para a carboxiemoglobina foi de 1,0 % ± 0,75; o intervalo de confiança 95%, entre 0,9 e 1,1 % e o valor de referência superior, de 2,5%. Através do teste t de Student (p INTRODUCTION: The reference values (RV of biological indicators are used in the interpretation of the results of such indicators in individuals occupationally exposed to chemical agents. The Brazilian Group for the Establishment of Reference Values has worked on these definitions for the purpose of establishing RVs for several bioindicators in various regions of the country. In

Blending the Trends: A Holistic Approach to Reference Services

Science.gov (United States)

Dempsey, Megan

2011-01-01

The growing trends of tiered reference, roving librarians, and virtual reference offer academic libraries several options for providing the most effective reference service. Increased enrollment at community colleges has prompted a reconsideration of how librarians can balance reference, teaching, and faculty responsibilities. This article…

Reference nuclear data for space technology

International Nuclear Information System (INIS)

Burrows, T.W.; Holden, N.E.; Pearlstein, S.

1977-01-01

Specialized bibliographic searches, data compilations, and data evaluations help the basic and applied research scientist in his work. The National Nuclear Data Center (NNDC) collates and analyzes nuclear physics information, and is concerned with the timely production and revision of reference nuclear data. A frequently revised reference data base in computerized form has the advantage of large quantities of data available without publication delays. The information normally handled by coordinated efforts of NNDC consists of neutron, charged-particle, nuclear structure, radioactive decay, and photonuclear data. 2 figures

Reference Data Layers for Earth and Environmental Science: History, Frameworks, Science Needs, Approaches, and New Technologies

Science.gov (United States)

Lenhardt, W. C.

2015-12-01

Global Mapping Project, Web-enabled Landsat Data (WELD), International Satellite Land Surface Climatology Project (ISLSCP), hydrology, solid earth dynamics, sedimentary geology, climate modeling, integrated assessments and so on all have needs for or have worked to develop consistently integrated data layers for Earth and environmental science. This paper will present an overview of an abstract notion of data layers of this types, what we are referring to as reference data layers for Earth and environmental science, highlight some historical examples, and delve into new approaches. The concept of reference data layers in this context combines data availability, cyberinfrastructure and data science, as well as domain science drivers. We argue that current advances in cyberinfrastructure such as iPython notebooks and integrated science processing environments such as iPlant's Discovery Environment coupled with vast arrays of new data sources warrant another look at the how to create, maintain, and provide reference data layers. The goal is to provide a context for understanding science needs for reference data layers to conduct their research. In addition, to the topics described above this presentation will also outline some of the challenges to and present some ideas for new approaches to addressing these needs. Promoting the idea of reference data layers is relevant to a number of existing related activities such as EarthCube, RDA, ESIP, the nascent NSF Regional Big Data Innovation Hubs and others.

Event boundaries and anaphoric reference.

Science.gov (United States)

Thompson, Alexis N; Radvansky, Gabriel A

2016-06-01

The current study explored the finding that parsing a narrative into separate events impairs anaphor resolution. According to the Event Horizon Model, when a narrative event boundary is encountered, a new event model is created. Information associated with the prior event model is removed from working memory. So long as the event model containing the anaphor referent is currently being processed, this information should still be available when there is no narrative event boundary, even if reading has been disrupted by a working-memory-clearing distractor task. In those cases, readers may reactivate their prior event model, and anaphor resolution would not be affected. Alternatively, comprehension may not be as event oriented as this account suggests. Instead, any disruption of the contents of working memory during comprehension, event related or not, may be sufficient to disrupt anaphor resolution. In this case, reading comprehension would be more strongly guided by other, more basic language processing mechanisms and the event structure of the described events would play a more minor role. In the current experiments, participants were given stories to read in which we included, between the anaphor and its referent, either the presence of a narrative event boundary (Experiment 1) or a narrative event boundary along with a working-memory-clearing distractor task (Experiment 2). The results showed that anaphor resolution was affected by narrative event boundaries but not by a working-memory-clearing distractor task. This is interpreted as being consistent with the Event Horizon Model of event cognition.

Using vignettes to assess contributions to the work of addressing child mental health problems in primary care.

Science.gov (United States)

Wissow, Lawrence S; Zafar, Waleed; Fothergill, Kate; Ruble, Anne; Slade, Eric

2016-01-22

To further efforts to integrate mental health and primary care, this study develops a novel approach to quantifying the amount and sources of work involved in shifting care for common mental health problems to pediatric primary care providers. Email/web-based survey of a convenience sample (n = 58) of Maryland pediatricians (77% female, 58% at their site 10 or more years; 44% in private practice, 52 % urban, 48 % practicing with a co-located mental health provider). Participants were asked to review 11 vignettes, which described primary care management of child/youth mental health problems, and rate them on an integer-based ordinal scale for the overall amount of work involved compared to a 12th reference vignette describing an uncomplicated case of ADHD. Respondents were also asked to indicate factors (time, effort, stress) accounting for their ratings. Vignettes presented combinations of three diagnoses (ADHD, anxiety, and depression) and three factors (medical co-morbidity, psychiatric co-morbidity, and difficult families) reported to complicate mental health care. The reference case was pre-assigned a work value of 2. Estimates of the relationship of diagnosis and complicating factors with workload were obtained using linear regression, with random effects at the respondent level. The 58 pediatricians gave 593 vignette responses. Depression was associated with a 1.09 unit (about 50%) increase in work (95% CL .94, 1.25), while anxiety did not differ significantly from the reference case of uncomplicated ADHD (p = .28). Although all three complicating factors increased work ratings compared with the reference case, family complexity and psychiatric co-morbidity did so the most (.87 and 1.07 units, respectively, P work were physician time, physician mental effort, and stress; those least strongly associated were staff time, physician physical effort, and malpractice risk. Pediatricians working with co-located mental health providers gave higher work

Human Rights: The Essential Reference.

Science.gov (United States)

Devine, Carol; Hansen, Carol Rae; Wilde, Ralph; Bronkhorst, Daan; Moritz, Frederic A.; Rolle, Baptiste; Sherman, Rebecca; Southard, Jo Lynn; Wilkinson, Robert; Poole, Hilary, Ed.

This reference work documents the history of human rights theory, explains each article of the Universal Declaration of Human Rights, explores the contemporary human rights movement, and examines the major human rights issues facing the world today. This book is the first to combine historical and contemporary perspectives on these critical…

Reference model for apparel product development

Directory of Open Access Journals (Sweden)

Isabel Cristina Moretti

2017-03-01

Full Text Available The purpose of this paper was to develop a reference model for the implementation of the process of product development (PDP for apparel. The tool was developed through an interactive process of comparison between theoretical. Managers in companies and professionals working in this market can utilize the reference model as a source for the organization and improvement of the PDP for apparel and the universities as a reference source for systematized teaching of this process. This model represents the first comprehensive attempt to develop an instrument at a detailed level (macro phases, phases, activities, inputs and outputs at each stage and at the gates to systematize the PDP process for fashion products and to consider its particularities.

Evaluation of the uniformity of wide circular reference source and application of correction factors

International Nuclear Information System (INIS)

Silva Junior, I.A.; Xavier, M.; Siqueira, P.T.D.; Sordi, G.A.A.; Potiens, M.P.A.

2017-01-01

In this work the uniformity of wide circular reference sources is evaluated. This kind of reference source is still widely used in Brazil. In previous works wide rectangular reference sources were analyzed and it was shown the importance of the application of correction factors in calibration procedures of radiation monitors. Now a transposition of the methods used formerly is performed, evaluating the uniformities of circular reference sources and calculating the associated correction factors. (author)

NUnit Pocket Reference

CERN Document Server

Hamilton, Bill

2009-01-01

The open source NUnit framework is an excellent way to test .NET code as it is written, saving hundreds of QA hours and headaches. Unfortunately, some of those hours saved can be wasted trying to master this popular but under-documented framework. Proof that good things come in small packages, the NUnit Pocket Reference is everything you need to get NUnit up and working for you. It's the only book you'll need on this popular and practical new open source framework.

Reference sources for radionuclide calibrations in nuclear programmes

Energy Technology Data Exchange (ETDEWEB)

Almeida, M.C.M. de; Delgado, J.U.; Poledna, R.; Silva, R.L. da; Oliveira, E.M. de; Di Prinzio, M.A.R., E-mail: marcandida@yahoo.com.b [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Lab. Nacional de Metrologia das Radiacoes Ionizantes (LNMRI)

2009-07-01

The radionuclide metrology laboratories aim to provide radioactive standards for detector calibrations in nuclear safety areas. To produce the reference sources to be furnished to users the following standards of {sup 57}Co, {sup 60}Co, {sup 133}Ba, {sup 241}Am, {sup 152}Eu and {sup 166}Ho are commonly used. In this work was made a verifying of the uncertainties obtained for the two methods: comparative (sample-standards) and efficiency curve. The total uncertainties obtained by sample-standard method varied from 0.4 to 1.2% (k = 1). The results using efficiency curve method to the same radioisotopes and same conditions are between 0.9 to 2.2% (k = 1). (author)

Micronutrient bioavailability: Dietary Reference Intakes and a future perspective1234

Science.gov (United States)

2010-01-01

This article provides a review of how the challenge of bioavailability was approached in establishing the Dietary Reference Intakes, with a special focus on folic acid, vitamin B-12, β-carotene, iron, selenium, and zinc, the targeted micronutrients for this workshop. In a future perspective, the necessity of having a clear working definition of bioavailability is emphasized. The bioavailability of micronutrients should be considered, with advantage, under subheadings determined by the broad factors that affect bioavailability. Special emphasis is given to giving greater and specific attention to factors involved in the maintenance of homeostasis. These factors, it is argued, are best considered separately from even a broad definition of bioavailability and have the potential to provide new insights into some micronutrient requirements. PMID:20200261

Problems of the organizational providing of psychological work in divisions of the state traffic Inspectorate

Directory of Open Access Journals (Sweden)

Petrov V. E.

2017-01-01

Full Text Available The article analyzes the problems of the organizational providing of psychological work in divisions of the state traffic Inspectorate. Detailed the range of tasks that need to be implemented to psychologists, and specifics of the state traffic Inspectorate. The features of carrying out of activities of professional psychological selection of candidates for service, psychological training, prevention and other support activities. Potentially conflicting interaction of inspectors of traffic police with the participants of traffic, the inability to predict traffic situations and the psycho drivers necessitate treatment to psychological knowledge and the application of the constant efforts of specialists-psychologists. It is shown that the replacement of tenured psychologists psychologists state traffic Inspectorate of the territorial body of internal Affairs will not amount to nor the volume of work nor its quality. Psychological work with the personnel of the state traffic Inspectorate should only be carried out by psychologists of this unit. Eventually psychologist in the state traffic Inspectorate has expressed prospects and can not be replaced by the activities of other specialists.

New reference materials improvement of methods of measurements

International Nuclear Information System (INIS)

Marchandise, H.

1985-01-01

The report summarizes the development of about 120 reference materials in a variety of fields (non ferrous metals, trace element analysis, food products, biomedical analysis, physical and technical properties of solid materials). The document also provides practical advice for trace element analyses, describes the principles followed for certifying reference materials and provides recommendations for their use

Study on modular technology based on the reference nuclear power plant

International Nuclear Information System (INIS)

Lu Qinwu; Zhao Shuyu; Li Yi; Han Xiaoping; Chai Weidong; Zhang Shuxia

2014-01-01

As an important technology for shortening the construction period and reducing the cost of nuclear power project, modular technology has become one of the development orientations of the third generation nuclear power plant. Taking CPR1000 nuclear power reactor as reference plant and drawing on advanced foreign technology of modularization, the overall concept design has been completed with the help of the self-developed 3D modular design system. On this basis, a typical detailed design work has been carried out so as to verify the feasibility of technology. Besides, an analysis on implementation of modular technology has been made from two aspects (procurement and construction), and the feasibility of research results in actual project has been evaluated. It provides references for the promotion of self-reliant modular technology in nuclear power project in China. (authors)

Institutional Provider and Beneficiary Summary PUF

Data.gov (United States)

U.S. Department of Health & Human Services — The CMS IPBS PUFs are aggregated files in which each record summarizes information for a particular institutional provider. An institutional provider refers to a...

Vaccines provided by family physicians.

Science.gov (United States)

Campos-Outcalt, Doug; Jeffcott-Pera, Michelle; Carter-Smith, Pamela; Schoof, Bellinda K; Young, Herbert F

2010-01-01

This study was conducted to document current immunization practices by family physicians. In 2008 the American Academy of Family Physicians (AAFP) conducted a survey among a random sample of 2,000 of its members who reported spending 80% or more of their time in direct patient care. The survey consisted of questions regarding the demographics of the practice, vaccines that are provided at the physicians' clinical site, whether the practice refers patients elsewhere for vaccines, and participation in the Vaccines for Children (VFC) program. The response rate was 38.5%, 31.8% after non-office-based respondents were deleted. A high proportion of respondents (80% or more) reported providing most routinely recommended child, adolescent, and adult vaccines at their practice sites. The exceptions were rotavirus vaccine for children and herpes zoster vaccine for adults., A significant proportion, however, reported referring elsewhere for some vaccines (44.1% for children and adolescent vaccines and 53.5% for adult vaccines), with the most frequent referral location being a public health department. A higher proportion of solo and 2-physician practices than larger practices reported referring patients. A lack of adequate payment was listed as the reason for referring patients elsewhere for vaccines by one-half of those who refer patients. One-half of responders do not participate in the VFC program. Provision of recommended vaccines by most family physicians remains an important service. Smaller practices have more difficulty offering a full array of vaccine products, and lack of adequate payment contributes to referring patients outside the medical home. The reasons behind the lack of participation in the VFC program deserve further study.

Perspectives of addiction treatment providers

African Journals Online (AJOL)

Background. General practitioners are referring patients with codeine-related problems to specialist treatment facilities, but little is known about the addiction treatment providers, the kinds of treatment they provide, and whether training or other interventions are needed to strengthen this sector. Objectives. To investigate the ...

Dizziness causes absence from work.

Science.gov (United States)

van der Zaag-Loonen, H J; van Leeuwen, R B

2015-09-01

The objective of the study was to assess absenteeism from work due to dizziness in patients referred to a tertiary centre. Consecutive patients with a paid employment completed the WHO Health and work Performance Questionnaire, including items on work absence in the past 7 days and 4 weeks, and the Dizziness Handicap Inventory. Of the 400 patients [55% females, mean age 46.3 years (SD 10.8), range 18-68 years], 46 (12%) indicated they were completely disabled to work due to dizziness, while 202 (51%) patients indicated they had worked less than expected due to dizziness. Patients with more disease-related disabilities had more absenteeism from work. Half of the patients who are referred to a tertiary centre for dizziness report work absenteeism due to their complaints, and 12% is completely disabled to work.

Adaptive Control with Reference Model Modification

Science.gov (United States)

Stepanyan, Vahram; Krishnakumar, Kalmanje

2012-01-01

This paper presents a modification of the conventional model reference adaptive control (MRAC) architecture in order to improve transient performance of the input and output signals of uncertain systems. A simple modification of the reference model is proposed by feeding back the tracking error signal. It is shown that the proposed approach guarantees tracking of the given reference command and the reference control signal (one that would be designed if the system were known) not only asymptotically but also in transient. Moreover, it prevents generation of high frequency oscillations, which are unavoidable in conventional MRAC systems for large adaptation rates. The provided design guideline makes it possible to track a reference commands of any magnitude from any initial position without re-tuning. The benefits of the method are demonstrated with a simulation example

A Science of Social Work? Response to John Brekke

Science.gov (United States)

Shaw, Ian

2014-01-01

I take the opportunity provided by John Brekke's (2012) article to respond to the general assumptions and approaches that may be brought when considering the question of a science of social work. I consider first, what should be our frames of reference, our communities of interest, or our boundaries of inclusion, for such a discussion?…

Institutional capacity to provide psychosocial oncology support services: A report from the Association of Oncology Social Work.

Science.gov (United States)

Zebrack, Brad; Kayser, Karen; Padgett, Lynne; Sundstrom, Laura; Jobin, Chad; Nelson, Krista; Fineberg, Iris C

2016-06-15

This study reports cancer-treating institutions' capacity to deliver comprehensive psychosocial support services. Oncology care providers at 60 cancer-treating institutions completed surveys assessing the capacity of their institutions to provide psychosocial care. Capacity was assessed with the Cancer Psychosocial Care Matrix (CPCM) from the National Cancer Institute (NCI). Scores represented individuals' perceptions of their cancer program's performance with respect to 10 fundamental elements of psychosocial care. Among 2134 respondents, 62% reported a mid-level capacity for ≥5 of 10 CPCM items. In comparison with other types of cancer programs (eg, NCI-designated, academic, or comprehensive centers), providers at community cancer programs reported a significantly greater capacity with respect to patient-provider communication, psychosocial needs assessment, and continuity in the delivery of psychosocial care over time. Nurses and primary medical providers reported a significantly lower capacity for linking patients and families with needed psychosocial services within their respective cancer programs. They also reported a significantly higher capacity for conducting follow-up, re-evaluations, and adjustments of psychosocial treatment plans. Cancer programs are performing moderately well in terms of communicating to patients the importance of psychosocial care, identifying patient psychosocial needs, and referring patients and families to psychosocial services. They are doing less well with respect to the provision of that care over time. Findings suggest that gaps in psychosocial service capacity are a function of patient, provider, and system characteristics. These results may be useful in formulating strategies to enhance psychosocial care delivery. Cancer 2016;122:1937-45. © 2016 American Cancer Society. © 2016 American Cancer Society.

Effects of new ways of working on work hours and work location, health and job-related outcomes.

Science.gov (United States)

Nijp, Hylco H; Beckers, Debby G J; van de Voorde, Karina; Geurts, Sabine A E; Kompier, Michiel A J

2016-01-01

New ways of working (NWW) is a type of work organization that is characterized by temporal and spatial flexibility, often combined with extensive use of information and communication technologies (ICT) and performance-based management. In a three-wave intervention study, we examined the effects of NWW on both the organization of work (changes in control over time and place of work; working hours and work location; and other key job characteristics), and on employees' outcomes (work-nonwork balance; health and well-being; and job-related outcomes). We applied a quasi-experimental design within a large Dutch financial company (N = 2,912). We studied an intervention group (n = 2,391) and made comparisons with a reference group (n = 521). There were three study waves: (i) one/two months before, and (ii) 4 months and (iii) 10 months after implementation of NWW. Repeated measures analyses of covariance (involving 361 participants from the intervention group and 80 participants from the reference group) showed a large and significant shift from hours worked at the office to hours worked at home after implementation of NWW. Accordingly, commuting time was reduced. Employees remained working on week days and during day time. Psychosocial work-characteristics, work-nonwork balance, stress, fatigue, and job-related outcomes remained favourable and largely unaffected, but the health score in the intervention group decreased (medium effect). These findings suggest that the implementation of NWW does not necessarily lead to changes in psychosocial work characteristics, well-being or job-related outcomes.

The development and evaluation of reference materials for food microbiology

NARCIS (Netherlands)

Veld, in 't P.

1998-01-01

Since 1986 the National Institute of Public Health and the Environment (RIVM) has worked on the development and evaluation of microbiological reference materials (RMs) with support from the European Communities Bureau of Reference (BCR), now called Standards Measurement and Testing

From "Work-Family" to "Work-Life": Broadening Our Conceptualization and Measurement

Science.gov (United States)

Keeney, Jessica; Boyd, Elizabeth M.; Sinha, Ruchi; Westring, Alyssa F.; Ryan, Ann Marie

2013-01-01

Despite frequent reference to "work-life" issues in the organizational literature, little theoretical or empirical attention has been paid to nonwork areas beyond family. The purpose of the research described here is to move beyond work-family conflict to a broader conceptualization and measurement of work interference with life. A measure of work…

Quick Reference for Financial Reporting

International Development Research Centre (IDRC) Digital Library (Canada)

Alexandra Eustache

Quick Reference – Financial Reporting. 6. Complete FR3 - Payment Receipts, Foreign Exchange and Other Income Forms: a. Enter in Section 3A – Payment Receipt Form all payments received from IDRC. b. Use the Cash Exchange Form if the funds received from IDRC are held in a currency other than the project working ...

Instrumentation reference book

CERN Document Server

Boyes, Walt

2002-01-01

Instrumentation is not a clearly defined subject, having a 'fuzzy' boundary with a number of other disciplines. Often categorized as either 'techniques' or 'applications' this book addresses the various applications that may be needed with reference to the practical techniques that are available for the instrumentation or measurement of a specific physical quantity or quality. This makes it of direct interest to anyone working in the process, control and instrumentation fields where these measurements are essential.* Comprehensive and authoritative collection of technical information* Writte

Effects on employees of controlling working hours and working schedules.

Science.gov (United States)

Kubo, T; Takahashi, M; Togo, F; Liu, X; Shimazu, A; Tanaka, K; Takaya, M

2013-03-01

High levels of control over working time and low variability in working hours have been associated with improved health-related outcomes. The potential mechanisms for this association remain unclear. To examine how work-time control and variability of working times are associated with fatigue recovery, sleep quality, work-life balance, and 'near misses' at work. Manufacturing sector employees completed a questionnaire that assessed work-time control, work-time variability, fatigue recovery, sleep quality, work-life balance and the frequency of near misses in the past 6 months. Mixed model analysis of covariance and multiple logistic regression analysis tested the main effects of work-time control and variability and their interaction, while adjusting for age, sex, work schedules, and overtime work in the past month. Subscales of work-time control were also investigated (control over daily working hours and over days off). One thousand three hundred and seventy-two completed questionnaires were returned, a response rate of 69%. A significantly higher quality of sleep and better work-life balance were found in the 'high control with low variability' reference group than in the other groups. Significantly better recovery of fatigue was also observed in the group having control over days off with low variability. While near misses were more frequent in the group with high control over daily working hours coupled with high variability compared with the reference group this was not significant. High work-time control and low variability were associated with favourable outcomes of health and work-life balance. This combined effect was not observed for the safety outcome addressed here.

Establishing Accurate and Sustainable Geospatial Reference Layers in Developing Countries

Science.gov (United States)

Seaman, V. Y.

2017-12-01

Accurate geospatial reference layers (settlement names & locations, administrative boundaries, and population) are not readily available for most developing countries. This critical information gap makes it challenging for governments to efficiently plan, allocate resources, and provide basic services. It also hampers international agencies' response to natural disasters, humanitarian crises, and other emergencies. The current work involves a recent successful effort, led by the Bill & Melinda Gates Foundation and the Government of Nigeria, to obtain such data. The data collection began in 2013, with local teams collecting names, coordinates, and administrative attributes for over 100,000 settlements using ODK-enabled smartphones. A settlement feature layer extracted from satellite imagery was used to ensure all settlements were included. Administrative boundaries (Ward, LGA) were created using the settlement attributes. These "new" boundary layers were much more accurate than existing shapefiles used by the government and international organizations. The resulting data sets helped Nigeria eradicate polio from all areas except in the extreme northeast, where security issues limited access and vaccination activities. In addition to the settlement and boundary layers, a GIS-based population model was developed, in partnership with Oak Ridge National Laboratories and Flowminder), that used the extracted settlement areas and characteristics, along with targeted microcensus data. This model provides population and demographics estimates independent of census or other administrative data, at a resolution of 90 meters. These robust geospatial data layers found many other uses, including establishing catchment area settlements and populations for health facilities, validating denominators for population-based surveys, and applications across a variety of government sectors. Based on the success of the Nigeria effort, a partnership between DfID and the Bill & Melinda Gates

The evaluation for reference fission yield of 238U fission

International Nuclear Information System (INIS)

Liang Qichang; Liu Tingjin

1998-01-01

In the fission yield data evaluation and measurement, the reference yield is very important, good or poor recommended or measurement values depend upon the reference data to a great extent. According to the CRP's requirement, the evaluation of reference fission yields have been and will be carried out in CNDC, as a part of the whole work (contract No.9504/R 0 /Regular Budget Fund), the evaluation for 29 reference fission yields of 15 product nuclides from 238 U fission have been completed

Technical reference manual for TIME4. Vol. 2

International Nuclear Information System (INIS)

Wilmot, R.D.; Ringrose, P.S.; Larkin, J.P.A.; Kleissen, F.A.T.

1991-07-01

This document is the Technical Reference Manual for the TIME4 model. TIME4 is the environmental change model developed for use in the probabilistic risk analysis of deep disposal of radioactive waste. The Technical Reference Manual describes the theoretical background to the model. The modelling method is described, followed by a review of related work and a detailed description for each sub-model. (author)

Prediction of total electron content using the international reference ionosphere

International Nuclear Information System (INIS)

Mcnamara, L.F.

1984-01-01

It is pointed out that the International Reference Ionosphere (IRI) is an empirical model of the ionosphere based on experimental observations. Rawer et al. (1978) have discussed the goals and status of the IRI. The aim of the IRI is related to the establishment of a compendium of height profiles through the ionosphere for the four main parameters, taking into account plasma density, temperature of ions and electrons, and ion composition. The present model is inadequate in some areas, and the IRI working group has encouraged tests of the model's validity. The present investigation is concerned with a test of the model's ability to reproduce observations of total electron content (TEC) over a wide range of conditions. The TEC observations were obtained with the aid of the Faraday rotation technique, which provides the TEC out to about 2000 km. Tests using the Bent ionospheric model indicate that the altitude range 1000 to 2000 km contributes up to five percent of the TEC. 12 references

Hospitality Services Reference Book.

Science.gov (United States)

Texas Tech Univ., Lubbock. Home Economics Curriculum Center.

This reference book provides information needed by employees in hospitality services occupations. It includes 29 chapters that cover the following topics: the hospitality services industry; professional ethics; organization and management structures; safety practices and emergency procedures; technology; property maintenance and repair; purchasing…

Academic Librarians Should Be Sensitive to Language and Cultural Barriers When Providing Reference Service to International Students. A review of: Curry, Ann and Deborah Copeman. “Reference Service to International Students: A Field Stimulation Research Study.” Journal of Academic Librarianship 31.5 (Sep. 2005: 409‐20.

Directory of Open Access Journals (Sweden)

Lorie A. Kloda

2006-12-01

Full Text Available Objective – To evaluate the quality of reference service provided to non‐native, English‐speaking international students in academic libraries.Design – Field stimulation (unobtrusive testing.Setting – Eleven college and university libraries in the lower mainland of British Columbia, Canada, in the fall of 2003.Subjects – Library staff offering reference service at one of the participating libraries.Methods – The study utilized field stimulation, whereby an individual, or “proxy,” posed as a library user and initiated a reference encounter with library staff at each institution. In each case the proxy asked the same question to the library staff member. After the interaction was completed the proxy recorded all observed behaviours. Data were collected using a checklist of actions; a narrative record written by the proxy; and several evaluative questions. Each library was visited by the same proxy on two separate occasions for a total of 22 visits, of which 20 instances resulted in usable data. The narrative recordings of the reference encounters were analyzed using an open coding process.Main results – In 75% of the cases, the proxy was “‘satisfied” or “very satisfied” with help received from the library staff member and was “likely to” or “definitely would return to the staff member” in the future. The reference encounters lasted between a few minutes to half an hour in length, with most lasting between 5 and 15 minutes. Encounters that were brief (less than 5 minutes resulted in an evaluation of “dissatisfied” or “very dissatisfied” and “not likely to” or “definitely would not return.” Encounters where the library staff member extended an invitation to the proxy to return in the future were all rated with “high satisfaction” and “willingness to return.” The following reference service actions were observed in at least half of the encounters:• Asked questions for clarification (20�

Selected Reference Books of 1971-72

Science.gov (United States)

Sheehy, Eugene P.

1973-01-01

The purpose of this annotated list is to present a selection of recent scholarly and foreign works of interest to reference workers in university libraries. The citations are listed under the following headings: guide, bibliography, encyclopedias, dictionaries, newspapers, dissertations, biography, genealogy, literature, education, sociology,…

17 CFR 230.411 - Incorporation by reference.

Science.gov (United States)

2010-04-01

... following provisions: (1) Non-financial information may be incorporated by reference to any document; (2) Financial information may be incorporated by reference to any document, provided any financial statement so incorporated meets the requirements of the forms on which the statement is filed. Financial statements or other...

U. S. programs on reference and advanced cladding/duct materials

International Nuclear Information System (INIS)

Bennett, J.W.; Holmes, J.J.; Laidler, J.J.

1977-05-01

Two coordinated national programs are presently in place in the United States for development of reference and advanced cladding and duct alloys for near-term and long-term LMFBR applications. A number of government, industrial and university laboratories are active participants in these two ERDA-sponsored programs. The programs are administered by ERDA through a task group organization, with each task group representing a particular technical activity and the membership of the task group drawn from among the laboratories with active involvement in that activity. Technical coordination of the two programs is provided by the Hanford Engineering Development Laboratory. The National Reference Cladding and Duct Program is charged with the responsibility for development of the required technology to permit full utilization of the reference material, 20 percent cold-worked Type 316 stainless steel, in early LMFBR core applications. The current schedule calls for full evaluation of FFTF-related design base data prior to full-power operation of FFTF in early 1980, followed by a confirmation in early 1983 of reference material performance capabilities for initial-core CRBRP applications. Comprehensive evaluation of reference material performance to commercial plant goal fluence levels will be complete by 1985. The National Advanced Alloy Development Program was instituted in 1974 with the objective to develop, by 1986, advanced cladding and duct materials compatible with advanced fuel systems having peak burnup capabilities up to 150 MWD/kg and doubling times of 15 years or less. Screening of a large number of potential alloys was completed in mid-1975, and there are presently 16 candidate alloys under active investigation

[Hospital-based psychological first aid provided to patients injured in the Lushan earthquake].

Science.gov (United States)

Yin, Min; Li, Xiao-Lin; Li, Jing; Huang, Xue-Hua; Tao, Qing-Lan; Luo, Xi

2015-04-01

In the aftermath of the 7.0 earthquake that struck Lushan in China's Sichuan Province on April 20, 2013, a psychological crisis intervention working group was established in a hospital that was treating earthquake victims. Patients at this hospital received psychological first aid that was delivered in accordance with scientific, systematic, and standardized principles. This first aid employed a "rooting mode" methodology and was designed as a supportive psychological intervention. Mental assessment results showed that the general mental health, acute stress reactions, and anxiety and depression status of all of the 131 injured who received the psychological intervention had significantly improved (p first aid, the approach used to organize the working groups, the main contents of the intervention, specific methods used, and intervention outcomes. This information is provided as a reference for providing localized psychological assistance in the aftermath of a disaster incident.

Contralateral delay activity provides a neural measure of the number of representations in visual working memory.

Science.gov (United States)

Ikkai, Akiko; McCollough, Andrew W; Vogel, Edward K

2010-04-01

Visual working memory (VWM) helps to temporarily represent information from the visual environment and is severely limited in capacity. Recent work has linked various forms of neural activity to the ongoing representations in VWM. One piece of evidence comes from human event-related potential studies, which find a sustained contralateral negativity during the retention period of VWM tasks. This contralateral delay activity (CDA) has previously been shown to increase in amplitude as the number of memory items increases, up to the individual's working memory capacity limit. However, significant alternative hypotheses remain regarding the true nature of this activity. Here we test whether the CDA is modulated by the perceptual requirements of the memory items as well as whether it is determined by the number of locations that are being attended within the display. Our results provide evidence against these two alternative accounts and instead strongly support the interpretation that this activity reflects the current number of objects that are being represented in VWM.

Utilization of Reference Books by Students: A Case Study of Covenant University, Nigeria

Directory of Open Access Journals (Sweden)

Julie E. Ilogho

2012-12-01

Full Text Available This study assessed the utilization of reference books by final-year students of Covenant University, Nigeria with a view to providing valuable data to help students to get a better orientation on the use and importance of reference sources for their research work, to guide instructors and teachers on the use of library, information retrieval processes and information literacy, and to help University management, policy-makers and other stakeholders to make appropriate policies concerning the acquisitions of library materials. The survey method of research was adopted for the study. The simple random sampling technique was used in choosing the study population. The respondents for the questionnaire, interview and focus group discussion were chosen from the 400- and 500-level undergraduate students at the Covenant University. 300 copies of the questionnaires were administered to respondents. A focus group discussion was conducted with 30 participants. And 18 students were interviewed. It was revealed that students prefer online resources, which accounts for the poor usage of the hardcopy reference materials. It is, therefore, recommended that the library should intensify its information literacy skills program in order to help users maximize online reference resources. At the same time, the library should acquire more online reference sources rather than buying hard copies for a few users.

The role of certified reference materials in material control and accounting

International Nuclear Information System (INIS)

Turel, S.P.

1979-01-01

One way of providing an adequate material control and accounting system for the nuclear fuel cycle is to calculate material unaccounted for (MUF) after a physical inventory and to compare the limit of error of the MUF value (LEMUF) against prescribed criteria. To achieve a meaningful LEMUF, a programme for the continuing determination of systematic and random errors is necessary. Within this programme it is necessary to achieve traceability of all Special Nuclear Material (SNM) control and accounting measurements to an International/National Measurement System by means of Certified Reference Materials. SNM measurements for control and accounting are made internationally on a great variety of materials using many diverse measurement procedures by a large number of facilities. To achieve valid overall accountability over this great variety of measurements there must be some means of relating all these measurements and their uncertainties to each other. This is best achieved by an International/National Measurement System (IMS/NMS). To this end, all individual measurement systems must be compatible to the IMS/NMS and all measurement results must be traceable to appropriate international/national Primary Certified Reference Materials. To obtain this necessary compatibility for any given SNM measurement system, secondary certified reference materials or working reference materials are needed for every class of SNM and each type of measurement system. Ways to achieve ''traceability'' and the various types of certified reference material are defined and discussed in this paper. (author)

Echocardiographic reference ranges for sedentary donkeys in the UK.

Science.gov (United States)

Roberts, S L; Dukes-McEwan, J

2016-10-01

The aim of this study was to provide two-dimensional (2D) and M-mode echocardiographic reference ranges from a sample of the UK population of donkeys including geriatrics (>30 years), owned by The Donkey Sanctuary, and to assess the influence of gender, weight and age on these variables. A total of 36 donkeys with no clinical or echocardiographic evidence of cardiovascular disease were examined; 24 geldings and 12 females, aged 3-45 years old, weighing 130-262 kg. Left atrial to aortic ratio was larger in geldings (P=0.004). There was no significant difference for left ventricular M-mode diastolic diameter between females and geldings (P=0.121) after exclusion of one heavy female outlier. 2D measurements significantly increased with bodyweight including maximal left atrial diameter (R(2)=0.112; P=0.046), aortic diameter at various levels (e.g. annulus: R(2)=0.35; Pdonkeys across a wide age range and shows differences compared with reference ranges from working donkeys. British Veterinary Association.

Equipes de referência e apoio especializado matricial: um ensaio sobre a reorganização do trabalho em saúde Local reference teams and specialized matrix support: an essay about reorganizing work in health services

Directory of Open Access Journals (Sweden)

Gastão Wagner de Sousa Campos

1999-01-01

Full Text Available Este artigo propõe um novo arranjo organizacional para o trabalho em saúde. É desenvolvido e ampliado o conceito de equipe de referência - proposto e experimentado pelo autor desde 1989. É também reelaborado o conceito de organização matricial do trabalho, invertendo-se em relação ao esquema original o que seria permanente e aquilo que seria transitório (recorte matricial nos serviços de saúde. São também apresentadas considerações teóricas que autorizam e justificam a construção desta nova proposta.A new organizational settlement for the work in the health services is proposed. An original concept is developed to defining the profile of a local reference team, as created and experimented by the author sice 1989. The classical organizational structure in matrix is realaborated to encompass this new approach. Theoretical consideration that subsidize and give basis to building this new proposal are presented.

Bibliography of work on the heterogeneous photocatalytic removal of hazardous compounds from water and air, Update Number 2 to October 1996

Energy Technology Data Exchange (ETDEWEB)

Blake, D.M.

1997-01-01

The Solar Industrial Program has developed processes that destroy hazardous substances in or remove them from water and air. The processes of interest in this report are based on the application of heterogeneous photocatalysts, principally titanium dioxide or modifications thereof, but work on other heterogeneous catalysts is included in this compilation. This report continues bibliographies that were published in May, 1994, and October, 1995. The previous reports included 663 and 574 citations, respectively. This update contains an additional 518 references. These were published during the period from June 1995 to October 1996, or are references from prior years that were not included in the previous reports. The work generally focuses on removing hazardous contaminants from air or water to meet environmental or health regulations. This report also references work on properties of semiconductor photocatalysts and applications of photocatalytic chemistry in organic synthesis. This report follows the same organization as the previous publications. The first part provides citations for work done in a few broad categories that are generic to the process. Three tables provide references to work on specific substances. The first table lists organic compounds that are included in various lists of hazardous substances identified by the US Environmental Protection Agency (EPA). The second table lists compounds not included in those categories, but which have been treated in a photocatalytic process. The third table covers inorganic compounds that are on EPA lists of hazardous materials or that have been treated by a photocatalytic process. A short update on companies that are active in providing products or services based on photocatalytic processes is provided.

News from the Library: You need never be lost for words again - Oxford Reference Online and Oxford Dictionaries Pro

CERN Multimedia

CERN Library

2012-01-01

Whether you are looking for an English word definition or want to check the correct usage of a word, we can offer you a solution: Oxford Reference Online.   It includes a wide range of monolingual and bilingual dictionaries, but also subject-specific reference books on physics, astronomy or mathematics. All these works are fully indexed and cross-searchable. Two highlights from this vast collection of reference works are the Concise Oxford English Dictionary and the Oxford Dictionary of English, which is the online counterpart of the compact, single-volume dictionary of current English language. As the name says, Oxford Dictionaries Pro focuses on language dictionaries. Particularly noteworthy are the dictionaries for writers and editors. On a dedicated web page you will find access to: - The "New Hart's Rules", providing information on all aspects of writing and preparing copy for publication, whether in print or electronically - The New Oxford Dictionary for Wri...

Analysis of E-mail Transactions in Virtual Reference Services

Directory of Open Access Journals (Sweden)

Astutik Nur Qomariyah

2018-01-01

Full Text Available Today, the use of traditional reference desk in the academic libraries has been rarely used, thus expanding or even move to a virtual reference service. A minimum level of virtual reference services are provided in the academic library is currently in general is the electronic mail (e-mail. One of the academic library specifically provide virtual reference services via e-mail is a Petra Christian University (PCU Library (refdesk@petra.ac.id.. In such services librarians provide assistance to users in finding information and answer questions. This study aimed to analyze the transaction reference services virtually through e-mail at the PCU Library, with a view of the types of questions based on user background, the writing style of language communication interaction used based on user background, and cultural values are revealed behind the user in virtual reference services (e-mail. This study uses content analysis (content analysis of the transcript e-mail received librarians of reference services began March 10 until June 16, 2015. The results showed that the types of questions asked in reference service virtual (e-mail in the Library UK Petra include: specific search, access online resources, operation of online resources, policies and procedures for services, and library holdings with background the student (PCU and non-PCU, faculty, and librarians. Based on the background of users found that overall more types of questions asked in virtual reference services (e-mail is a problem of access to online resources, and generally submitted by the students. Then, the writing style of the user's language in interaction reference service virtual (e-mail tends to be formal, which includes the word greeting, the message will be delivered, and regards cover, either by the student (PCU and non-PCU, lecturer, or librarians. While cultural values that revealed the background behind the user in virtual reference services (e-mail is obedience, courtesy and

Digital reference service : libraries online 24/7

OpenAIRE

Vijayakumar, Manju; Vijayakumar, J. K.

2005-01-01

The integration of the Internet Technology in to Libraries has not changed its mission of providing excellent information service to users but it has added several new dimensions and opened new avenues to their tasks. Reference librarians, while assisting users in the library, now have an additional set of remote users, who access the reference service online, who are more demanding, less patient users who have greater expectations. This paper discusses the methods in Online Reference service...

Effect of reference loads on fracture mechanics analysis of surface cracked pipe based on reference stress method

International Nuclear Information System (INIS)

Shim, Do Jun; Son, Beom Goo; Kim, Young Jin; Kim, Yun Jae

2004-01-01

To investigate relevance of the definition of the reference stress to estimate J and C * for surface crack problems, this paper compares FE J and C * results for surface cracked pipes with those estimated according to the reference stress approach using various definitions of the reference stress. Pipes with part circumferential inner surface crack and finite internal axial crack are considered, subject to internal pressure and global bending. The crack depth and aspect ratio are systematically varied. The reference stress is defined in four different ways using (I) the local limit load, (II) the global limit load, (III) the global limit load determined from the FE limit analysis, and (IV) the optimised reference load. It is found that the reference stress based on the local limit load gives overall excessively conservative estimates of J and C * . Use of the global limit load clearly reduces the conservatism, compared to that of the local limit load, although it can provide sometimes non-conservative estimates of J and C * . The use of the FE global limit load gives overall non-conservative estimates of J and C * . The reference stress based on the optimised reference load gives overall accurate estimates of J and C * , compared to other definitions of the reference stress. Based on the present finding, general guidance on the choice of the reference stress for surface crack problems is given

Employment references: defamation law in the clinical laboratory.

Science.gov (United States)

Parks, D G

1993-01-01

The law of defamation and the risks involved in issuing employment references are discussed. A hypothetical scenario is used to illustrate the legal standards governing the tort of defamation and to apply those standards to employment references. Practical suggestions for a "controlled reference" policy are provided, with the objective of allowing for responsible exchange of employment information and avoiding a defamation lawsuit.

Welfare and Work: Job-Retention Outcomes of Federal Welfare-to-Work Employees.

Science.gov (United States)

Gooden, Susan Tinsley; Bailey, Margo

2001-01-01

Comparison of differences in job-retention outcomes for 1,777 welfare-to-work employees and 16,723 other employees in federal agencies reveals that welfare-to-work employees have greater odds of retaining their jobs. (Contains 32 references.) (JOW)

Electro-cutaneous stimulation on the palm elicits referred sensations on intact but not on amputated digits

Science.gov (United States)

D'Alonzo, M.; Engels, L. F.; Controzzi, M.; Cipriani, C.

2018-02-01

Objective. Grasping and manipulation control critically depends on tactile feedback. Without this feedback, the ability for fine control of a prosthesis is limited in upper limb amputees. Early studies have shown that non-invasive electro-cutaneous stimulation (ES) can induce referred sensations that are spread to a wider and/or more distant area, with respect to the electrodes. Building on this, we sought to exploit this effect to provide somatotopically matched sensory feedback to people with partial hand (digital) amputations. Approach. For the first time, this work investigated the possibility of inducing referred sensations in the digits by activating the palmar nerves. Specifically, we electrically stimulated 18 sites on the palm of non-amputees to evaluate the effects of sites and stimulation parameters on modality, magnitude, and location of the evoked sensations. We performed similar tests with partial hand amputees by testing those sites that had most consistently elicited referred sensations in non-amputees. Main results. We demonstrated referred sensations in non-amputees from all stimulation sites in one form or another. Specifically, the stimulation of 16 of the 18 sites gave rise to reliable referred sensations. Amputees experienced referred sensations to unimpaired digits, just like non-amputees, but we were unable to evoke referred sensations in their missing digits: none of them reported sensations that extended beyond the tip of the stump. Significance. The possibility of eliciting referred sensations on the digits may be exploited in haptic systems for providing touch sensations without obstructing the fingertips or their movements. The study also suggests that the phenomenon of referred sensations through ES may not be exploited for partial hand prostheses, and it invites researchers to explore alternative approaches. Finally, the results seem to confirm previous studies suggesting that the stumps in partial hand amputees partially acquire the

FireWorks curriculum featuring ponderosa, lodgepole, and whitebark pine forests

Science.gov (United States)

Jane Kapler Smith; Nancy E. McMurray

2000-01-01

FireWorks is an educational program for students in grades 1-10. The program consists of the curriculum in this report and a trunk of laboratory materials, specimens, and reference materials. It provides interactive, hands-on activities for studying fire ecology, fire behavior, and the influences of people on three fire-dependent forest types - Pinus ponderosa...

The Meridians of Reference of Indian Astronomical Canons

Science.gov (United States)

Mercier, R.

The canons of Sanskrit astronomy depend on mean motions which are normally postulated to refer to the central meridian of Ujjain. The present work is a statistical analysis of these mean motions designed to discover the optimum position of the meridian, by comparison with modern mean motions. This follows earlier work done by Billard in determining the optimum year.

Working in English personal study book

CERN Document Server

Jones, Leo

2001-01-01

Working In English is a comprehensive course for Business English learners from Leo Jones, co-author of the successful New International Business English course. The core course comprises 40 one-hour units, focusing on thye practical day-to-day activities that all business people are involved in, and organised into seven modules. This pocket-sized Personal Study Book offers useful reference material and fun practice activities to do out of class. It comes with a free audio CD to provide extra self-study listening practice.

An age-related deficit in spatial-feature reference memory in homing pigeons (Columba livia).

Science.gov (United States)

Coppola, Vincent J; Flaim, Mary E; Carney, Samantha N; Bingman, Verner P

2015-03-01

Age-related memory decline in mammals has been well documented. By contrast, very little is known about memory decline in birds as they age. In the current study we trained younger and older homing pigeons on a reference memory task in which a goal location could be encoded by spatial and feature cues. Consistent with a previous working memory study, the results revealed impaired acquisition of combined spatial-feature reference memory in older compared to younger pigeons. Following memory acquisition, we used cue-conflict probe trials to provide an initial assessment of possible age-related differences in cue preference. Both younger and older pigeons displayed a similarly modest preference for feature over spatial cues. Copyright © 2014 Elsevier B.V. All rights reserved.

Microsoft Windows Server 2012 administration instant reference

CERN Document Server

Hester, Matthew

2013-01-01

Fast, accurate answers for common Windows Server questions Serving as a perfect companion to all Windows Server books, this reference provides you with quick and easily searchable solutions to day-to-day challenges of Microsoft's newest version of Windows Server. Using helpful design features such as thumb tabs, tables of contents, and special heading treatments, this resource boasts a smooth and seamless approach to finding information. Plus, quick-reference tables and lists provide additional on-the-spot answers. Covers such key topics as server roles and functionality, u

A routine chromium determination in biological materials; application to various reference materials and standard reference materials

International Nuclear Information System (INIS)

Tjioe, P.S.; Goeij, J.J.M. de; Volkers, K.J.

1979-01-01

The determination limit under standard working conditions of chromium in biological materials is discussed. Neutron activation analysis and atomic spectrometry have been described for some analytical experiences with NBS SRM 1577 reference material. The chromium determination is a part of a larger multi-element scheme for the determination of 12 elements in biological materials

Construction Marketing: Developing a Reference Framework

Directory of Open Access Journals (Sweden)

Mahmood Mokhtariani

2017-01-01

Full Text Available Successful companies are strongly committed to marketing management. However, marketing is either misunderstood or completely neglected in many construction companies, mainly due to the difficulty of applying conventional marketing in the industry, accompanied by the lack of sufficient research on the nature of marketing and tailored marketing theories and strategies for the construction. This study attempts to fill a part of this gap by examining the nature of the construction industry from the marketing viewpoint and developing a comprehensive framework. A systematic investigation into the nature via a combination of Kotler’s product classification system and Lovelock’s classification criteria reveals that construction is an “industrial, project-based, and primarily service-oriented” (IPS product with specific characteristics from the marketing perspective. Based on this nature, a reference framework for strategic marketing planning is developed through a literature review based on grounded theory and using the focus group discussion as a refinement tool. The framework indicates that construction companies are involved in and should plan for three working fields—project-based activities, relationship marketing, and marketing mix-related functions. The findings provide a fundamental basis that helps researchers and practitioners gain a true understanding of the concepts and scope of construction marketing and draw a clear and practical roadmap for future work.

From a Distance: Robust Reference Service via Instant Messaging

Science.gov (United States)

Meulemans, Yvonne Nalani; Carr, Allison; Ly, Pearl

2010-01-01

Reference service via instant messaging (IM) has significant potential to benefit distance learners. There has been wide experimentation with IM to expand reference services in libraries across the US, with mixed results. Concern has been expressed that IM cannot provide the same reference experience as face-to-face interactions. One academic…

Evaluation of Reference Services--A Review

Science.gov (United States)

Kuruppu, Pali U.

2007-01-01

Understanding the inherent deficiencies in reference service as provided is critical to providing effective, high quality service. Quantitative and qualitative research methodologies, as well as a combination of both, are being used to evaluate these services. The identification of appropriate research methodology is critical to an effective…

Work and Inertial Frames

Science.gov (United States)

Kaufman, Richard

2017-12-01

A fairly recent paper resolves a large discrepancy in the internal energy utilized to fire a cannon as calculated by two inertial observers. Earth and its small reaction velocity must be considered in the system so that the change in kinetic energy is calculated correctly. This paper uses a car in a similar scenario, but considers the work done by forces acting over distances. An analysis of the system must include all energy interactions, including the work done on the car and especially the (negative) work done on Earth in a moving reference frame. This shows the importance of considering the force on Earth and the distance Earth travels. For calculation of work in inertial reference frames, the center of mass perspective is shown to be useful. We also consider the energy requirements to efficiently accelerate a mass among interacting masses.

An N+3 Technology Level Reference Propulsion System

Science.gov (United States)

Jones, Scott M.; Haller, William J.; Tong, Michael To-Hing

2017-01-01

An N+3 technology level engine, suitable as a propulsion system for an advanced single-aisle transport, was developed as a reference cycle for use in technology assessment and decision-making efforts. This reference engine serves three main purposes: it provides thermodynamic quantities at each major engine station, it provides overall propulsion system performance data for vehicle designers to use in their analyses, and it can be used for comparison against other proposed N+3 technology-level propulsion systems on an equal basis. This reference cycle is meant to represent the expected capability of gas turbine engines in the N+3 timeframe given reasonable extrapolations of technology improvements and the ability to take full advantage of those improvements.

Right ventricular longitudinal strain correlates well with right ventricular stroke work index in patients with advanced heart failure referred for heart transplantation.

Science.gov (United States)

Cameli, Matteo; Lisi, Matteo; Righini, Francesca Maria; Tsioulpas, Charilaos; Bernazzali, Sonia; Maccherini, Massimo; Sani, Guido; Ballo, Piercarlo; Galderisi, Maurizio; Mondillo, Sergio

2012-03-01

Right ventricular (RV) systolic function has a critical role in determining the clinical outcome and success of using left ventricular assist devices (LVADs) in patients with refractory heart failure. Tissue Doppler and M-mode measurements of tricuspid systolic motion (tricuspid S' and tricuspid annular plane systolic excursion [TAPSE]) are the most currently used methods for the quantification of RV longitudinal function; RV deformation analysis by speckle-tracking echocardiography (STE) has recently allowed the analysis of global RV longitudinal function. Using cardiac catheterization as the reference standard, this study aimed at exploring the correlation between RV longitudinal function by STE and RV stroke work index (RVSWI) in patients referred for cardiac transplantation. Right-side heart catheterization and transthoracic echo Doppler were simultaneously performed in 41 patients referred for cardiac transplantation evaluation for advanced systolic heart failure. Thermodilution RV stroke volume and invasive pulmonary pressures were used to obtain RVSWI. RV longitudinal strain (RVLS) by STE was assessed averaging all segments in apical 4-chamber view (global RVLS) and by averaging RV free-wall segments (free-wall RVLS). Tricuspid S' and TAPSE were also calculated. No significant correlations were found for TAPSE or tricuspid S' with RVSWI (r = 0.14; r = 0.06; respectively). Close negative correlations between global RVLS and free-wall RVLS with the RVSWI were found (r = -0.75; r = -0.82; respectively; both P rights reserved.

Analysis of E-mail Transactions in Virtual Reference Services

Directory of Open Access Journals (Sweden)

Astutik Nur Qomariyah

2016-01-01

Full Text Available Today, the use of traditional reference desk in the academic libraries has been rarely used, thus expanding or even move to a virtual reference service. A minimum level of virtual reference services are provided in the academic library is currently in general is the electronic mail (e-mail. One of the academic library specifically provide virtual reference services via e-mail is a Petra Christian University (PCU Library (ref-desk@petra.ac.id.. In such services librarians provide assistance to users in finding information and answer questions. This study aimed to analyze the transaction reference services virtually through e-mail at the PCU Library, with a view of the types of questions based on user background, the writing style of language communication interaction used based on user background, and cultural values are revealed behind the user in virtual reference services (e-mail. This study uses content analysis (content analysis of the transcript e-mail received librarians of reference services began March 10 until June 16, 2015. The results showed that the types of questions asked in reference service virtual (e-mail in the Library UK Petra include: specific search, access online resources, operation of online resources, policies and procedures for services, and library holdings with background the student (PCU and non-PCU, faculty, and librarians. Based on the background of users found that overall more types of questions asked in virtual reference services (e-mail is a problem of access to online resources, and generally submitted by the students. Then, the writing style of the user's language in interaction reference service virtual (e-mail tends to be formal, which includes the word greeting, the message will be delivered, and regards cover, either by the student (PCU and non-PCU, lecturer, or librarians. While cultural values that revealed the background behind the user in virtual reference services (e-mail is obedience, courtesy and

Organizational Storytelling among Academic Reference Librarians

Science.gov (United States)

Colón-Aguirre, Mónica

2015-01-01

This study focuses on the roles of organizational stories among librarians who work at the reference desk. Twenty librarians employed in four academic institutions were interviewed. Most of the organizational stories shared among the participants and their colleagues were rich in tacit knowledge and can be classified according to four main roles:…

Description of a reference mixed oxide fuel fabrication plant (MOFFP)

International Nuclear Information System (INIS)

1978-01-01

In order to evaluate the environment impact, due to the Mixed Oxide Fuel Fabrication Plants, work has been initiated to describe the general design and operating conditions of a reference Mixed Oxide Fuel Fabrication Plant (MOFFP) for the 1990 time frame. The various reference data and basic assumptions for the reference MOFFP plant have been defined after discussion with experts. The data reported in this document are only made available to allow an evaluation of the environmental impact due to a reference MOFFP plant. These data have therefore not to be used as recommandation, standards, regulatory guides or requirements

Black-and-white photographic chemistry: A reference

Science.gov (United States)

Walker, E. D. (Compiler)

1986-01-01

This work is intended as a reference of black-and-white photographic chemistry. Included is a basic history of the photographic processes and a complete description of all chemicals used, formulas for the development and fixation process, and associated formulas such as cleaners, hardeners, and toners. The work contains a complete glossary of photographic terms, a trouble-shooting section listing causes and effects regarding photographic film and papers, and various conversion charts.

Some health effects of aircraft noise with special reference to shift work.

Science.gov (United States)

Rizk, Sanaa A M; Sharaf, Nevin E; Mahdy-Abdallah, Heba; ElGelil, Khalid S Abd

2016-06-01

Aircraft noise is an environmental stressor. A positive relationship exists between noise and high blood pressure. Shift work is an additional hazardous working condition with negative effect on the behavior attitude of workers. This study aimed at investigating some health hazards for shift work on workers at Cairo International Airport (CIA), Egypt, as a strategic work place, with more than one stressor. Assessment of noise effects were carried out in four working sites at the airport besides control sites. The average noise level in the exposure sites was 106.5 dB compared with 54 dB at the control sites. The study comprised a group of 200 male workers exposed to aircraft noise and 110 male workers not exposed to noise as control group. All workers had full general medical examination after filling specially formulated questionnaire. Hearing impairment, raised blood pressure, headaches, disturbed sleep, and symptoms of anxiety were more prominent among the exposed workers than the control. Symptoms of upper respiratory tract were reported among night shifters of both groups with high tendency for smoking. Thus, night-shift workers at CIA work under more than one stressor. Hypertension and smoking might act as intermediate factors on the causal pathway of complaints, making aircraft noise and night shift acting as two synergistic stressors. Airport workers are in need for aggressive hearing conservation programs. Organization of the working hours schedule is mandatory to avoid excessive noise exposure. © The Author(s) 2014.

Thermal-Diffusivity-Based Frequency References in Standard CMOS

NARCIS (Netherlands)

Kashmiri, S.M.

2012-01-01

In recent years, a lot of research has been devoted to the realization of accurate integrated frequency references. A thermal-diffusivity-based (TD) frequency reference provides an alternative method of on-chip frequency generation in standard CMOS technology. A frequency-locked loop locks the

The work ability continuum : Epidemiological studies of factors promoting sustainable work ability

OpenAIRE

Lindberg, Per

2006-01-01

For the individual, the workplace and society, there would be considerable gains if the number of people suffering from physical and mental disorders could be reduced. The overall aim of this thesis was to identify determinants for future work ability among gainfully employed women and men, with special reference to promotive factors at work. Work ability is in this thesis defined as the ability to work with respect to demands at work on health and physical and mental reso...

Decline in Reference Transactions with Few Questions Referred to Librarian when the Reference Desk is Staffed by a Paraprofessional. A Review of: Dinkins, D., & Ryan, S. M. (2010. Measuring referrals: The use of paraprofessionals at the reference desk. The Journal of Academic Librarianship, 36(4, 279-286.

Directory of Open Access Journals (Sweden)

Diana K. Wakimoto

2011-03-01

Full Text Available Objective — To determine the type and percentage of questions referred to a librarian by a paraprofessional (i.e., an individual without an MLIS staffing the reference desk, whether the percentage of referrals would decrease over time, and any consequences from having a paraprofessional rather than a librarian staffing the desk.Design — Quantitative analysis of reference desk transaction statistics.Setting — Reference desk at the main library of Stetson University, a private university in the United States of America with approximately 2,500 FTE (full-time equivalent students.Subjects — A total of 486 reference desk transactions recorded by a paraprofessional staffing the reference desk during the Fall and Spring semesters of the 2008-2009 academic year.Methods — The first year that he worked in the Library at Stetson University, a paraprofessional recorded all reference desk transactions during his shift from 10:00am to 12:00pm, four days a week, for the Fall and Spring semesters of the 2008-2009 academic year. This paraprofessional, with computer expertise, received "relatively minimal" (p. 281 training on "reference desk policies and procedures… the use of the catalogue and the subscription databases" (p. 281. For each transaction, the paraprofessional categorized the question as "direction, " "reference, " or "machine. " He was instructed to contact a librarian if he could not answer a reference question. The paraprofessional also completed a questionnaire regarding his level of comfort answering questions and his thoughts on the training at the end of his first year of staffing the reference desk.Main Results — In the Fall semester, 9.5% of all reference desk transactions were referred to a librarian. This decreased to 4.2% of the total transactions during the Spring semester. The percentage of reference questions referred to a librarian in the Fall semester was 21.9% and only 5.0% in the Spring semester. There was a 49

Semi-automatic construction of reference standards for evaluation of image registration

NARCIS (Netherlands)

Murphy, K.; Ginneken, van B.; Klein, S.; Staring, M.; Hoop, de B.J.; Viergever, M.A.; Pluim, J.P.W.

2011-01-01

Quantitative evaluation of image registration algorithms is a difficult and under-addressed issue due to the lack of a reference standard in most registration problems. In this work a method is presented whereby detailed reference standard data may be constructed in an efficient semi-automatic

Reference materials and interlaboratory comparison for actinide analysis

International Nuclear Information System (INIS)

Hanssens, Alain; Viallesoubranne, Carole; Roche, Claude; Liozon, Gerard

2008-01-01

Measurement quality is crucial for the safety of nuclear facilities and is a primary requirement for fissile material monitoring and accountancy. CETAMA (Cea Committee for the establishment of analysis methods), in collaboration with Cea and AREVA laboratories, fabricates certified reference materials and organizes interlaboratory comparison programs for plutonium and uranium assay in solution. A new plutonium metal measurement standard (MP3) is currently being prepared by Cea and is a subject of cooperative work in view of its certification and use by analysis laboratories. U and Pu interlaboratory comparisons are carried out at regular intervals on benchmark samples in coordination with working groups from French nuclear laboratories. These programs are supported by international cooperation. 'Chemical' methods (potentiometry, gravimetric analysis, etc.) generally provide the best accuracy. Coulometry is the benchmark technique for plutonium assay: its metrological qualities should be an incentive for wider use by laboratories performing precise control assays of plutonium as well as uranium. Gravimetric analysis provides excellent results for analysis of pure uranyl nitrate solutions. In view of its many advantages we encourage laboratories to employ this technique to assay pure U or Pu solutions. 'Physical' or 'physicochemical' methods are increasingly used, and their performance has improved. K-edge absorption spectrometry and isotope dilution mass spectrometry are capable of reaching measurement quality levels comparable to those of the best 'chemical' methods. (authors)

Chat reference service in medical libraries: part 2--Trends in medical school libraries.

Science.gov (United States)

Dee, Cheryl R

2003-01-01

An increasing number of medical school libraries offer chat service to provide immediate, high quality information at the time and point of need to students, faculty, staff, and health care professionals. Part 2 of Chat Reference Service in Medical Libraries presents a snapshot of the current trends in chat reference service in medical school libraries. In late 2002, 25 (21%) medical school libraries provided chat reference. Trends in chat reference services in medical school libraries were compiled from an exploration of medical school library Web sites and informal correspondence from medical school library personnel. Many medical libraries are actively investigating and planning new chat reference services, while others have decided not to pursue chat reference at this time. Anecdotal comments from medical school library staff provide insights into chat reference service.

Reliable reference electrodes for lithium-ion batteries

KAUST Repository

La Mantia, F.

2013-06-01

Despite the high attention drawn to the lithium-ion batteries by the scientific and industrial community, most of the electrochemical characterization is carried out using poor reference electrodes or even no reference electrode. In this case, the performances of the active material are inaccurate, especially at high current densities. In this work we show the error committed in neglecting the polarizability of lithium counter electrodes, and we propose two reference electrodes to use in organic electrolytes based on lithium salts, namely Li4Ti5O12 and LiFePO 4. In particular, it was observed that, the polarizability of the metallic lithium counter electrode has a relevant stochastic component, which renders measurements at high current densities (above 1 mA·cm - 2) in two electrode cells non reproducible.

Diagnostic work-up of 449 consecutive girls who were referred to be evaluated for precocious puberty

DEFF Research Database (Denmark)

Mogensen, Signe Sloth; Aksglaede, Lise; Mouritsen, Annette

2011-01-01

A decrease in age at pubertal onset has been observed internationally. The aim of this study was to describe a large cohort of Caucasian girls referred with signs of early puberty according to etiology and compare biochemical characteristics.......A decrease in age at pubertal onset has been observed internationally. The aim of this study was to describe a large cohort of Caucasian girls referred with signs of early puberty according to etiology and compare biochemical characteristics....

The Absolute Stability Analysis in Fuzzy Control Systems with Parametric Uncertainties and Reference Inputs

Science.gov (United States)

Wu, Bing-Fei; Ma, Li-Shan; Perng, Jau-Woei

This study analyzes the absolute stability in P and PD type fuzzy logic control systems with both certain and uncertain linear plants. Stability analysis includes the reference input, actuator gain and interval plant parameters. For certain linear plants, the stability (i.e. the stable equilibriums of error) in P and PD types is analyzed with the Popov or linearization methods under various reference inputs and actuator gains. The steady state errors of fuzzy control systems are also addressed in the parameter plane. The parametric robust Popov criterion for parametric absolute stability based on Lur'e systems is also applied to the stability analysis of P type fuzzy control systems with uncertain plants. The PD type fuzzy logic controller in our approach is a single-input fuzzy logic controller and is transformed into the P type for analysis. In our work, the absolute stability analysis of fuzzy control systems is given with respect to a non-zero reference input and an uncertain linear plant with the parametric robust Popov criterion unlike previous works. Moreover, a fuzzy current controlled RC circuit is designed with PSPICE models. Both numerical and PSPICE simulations are provided to verify the analytical results. Furthermore, the oscillation mechanism in fuzzy control systems is specified with various equilibrium points of view in the simulation example. Finally, the comparisons are also given to show the effectiveness of the analysis method.

Magnetohydrodynamics and the earth's core selected works by Paul Roberts

CERN Document Server

Soward, Andrew M

2003-01-01

Paul Roberts'' research contributions are remarkable in their diversity, depth and international appeal. Papers from the Paul Roberts'' Anniversary meeting at the University of Exeter are presented in this volume. Topics include geomagnetism and dynamos, fluid mechanics and MHD, superfluidity, mixed phase regions, mean field electrodynamics and the Earth''s inner core. An incisive commentary of the papers puts the work of Paul Roberts into historical context. Magnetohydrodynamics and the Earth''s Core provides a valuable source of reference for graduates and researchers working in this area of geoscience.

IAEA AQCS catalogue for reference materials and intercomparison exercises 1998/1999

International Nuclear Information System (INIS)

1999-01-01

Fore more than thirty years the International Atomic Energy Agency (IAEA), through its Analytical Quality Control Services (AQCS) programme, has been assisting Member States' laboratories to maintain and improve the reliability of their analyses by organizing intercomparison exercises and by preparing and distributing biological, environmental and marine reference materials. The catalogue consists principally of two parts: The list of all available IAEA reference materials grouped into five categories: reference materials for radionuclides; reference materials for trace, minor and major elements, including oxides; reference materials for stable isotopes; reference materials for organic contaminants and methyl mercury containing materials. Lists of all available IAEA reference materials sorted by analytes. In addition information on recommended half-life data and suppliers of radioactive sources is provided. Planned intercomparisons are advertised and request forms for participation in intercomparisons are included. Forms for ordering reference materials, quality control spectra for gamma-spectrometry on diskettes and AQCS related publications are also provided

Microgrid cyber security reference architecture.

Energy Technology Data Exchange (ETDEWEB)

Veitch, Cynthia K.; Henry, Jordan M.; Richardson, Bryan T.; Hart, Derek H.

2013-07-01

This document describes a microgrid cyber security reference architecture. First, we present a high-level concept of operations for a microgrid, including operational modes, necessary power actors, and the communication protocols typically employed. We then describe our motivation for designing a secure microgrid; in particular, we provide general network and industrial control system (ICS)-speci c vulnerabilities, a threat model, information assurance compliance concerns, and design criteria for a microgrid control system network. Our design approach addresses these concerns by segmenting the microgrid control system network into enclaves, grouping enclaves into functional domains, and describing actor communication using data exchange attributes. We describe cyber actors that can help mitigate potential vulnerabilities, in addition to performance bene ts and vulnerability mitigation that may be realized using this reference architecture. To illustrate our design approach, we present a notional a microgrid control system network implementation, including types of communica- tion occurring on that network, example data exchange attributes for actors in the network, an example of how the network can be segmented to create enclaves and functional domains, and how cyber actors can be used to enforce network segmentation and provide the neces- sary level of security. Finally, we describe areas of focus for the further development of the reference architecture.

Evaluation of Reference Centers for Special Immunobiologicals implementation

Directory of Open Access Journals (Sweden)

Laura Andrade Lagôa Nóbrega

2016-01-01

Full Text Available ABSTRACT OBJECTIVE To describe the Reference Centers for Special Immunobiologicals and evaluate their implementation considering formal regulations. METHODS We conducted a program evaluation, of evaluative research type. From August 2011 to January 2012, a questionnaire was applied to the 42 Reference Centers for Special Immunobiologicals existing in the Country, approaching the structure, human resources, and developed activities dimensions. We conducted a descriptive analysis of data and used a clustering for binary data with the squared Euclidean distance, by the farthest neighbor method, to aggregate services with similar features. RESULTS We observed great diversity among the services in the three dimensions. The clustering resulted in five service profiles, named according to their characteristics. 1 Best structure: 12 Reference Centers for Special Immunobiologicals with the highest proportion of services with the minimum of rooms recommended, purpose-built vaccine refrigerators, preventive maintenance of the cold chain, and oxygen source. 2 Immunobiologicals distributor: six Reference Centers for Special Immunobiologicals that distributed more than applied immunogens; no doctor present for more than half of the working hours and no purpose-built vaccine refrigerators . 3 Incipient implementation: five Reference Centers for Special Immunobiologicals with inadequate structure, such as absence of purpose-built vaccine refrigerators, preventive maintenance of the cold chain and oxygen source; none had computer. 4 Vaccination rooms: 13 Reference Centers for Special Immunobiologicals, everyone did routine immunization, most participated in vaccination campaigns. 5 Teaching and research: six services, all inserted into teaching hospitals, developed researches and received trainees; most had doctors in more than half of the working hours. CONCLUSIONS The evaluation of the Reference Centers for Special Immunobiologicals implementation was based on

The NIST natural-matrix radionuclide standard reference material program for ocean studies

International Nuclear Information System (INIS)

Inn, K.G.W.; Zhichao Lin; Zhongyu Wu; MacMahon, C.; Filliben, J.J.; Krey, P.; Feiner, M.; Harvey, J.

2001-01-01

In 1997, the Low-level Working Group of the International Committee on Radionuclide Metrology met in Boston, MA (USA) to define the characteristics of a new set of environmental radioactivity reference materials. These reference materials were to provide the radiochemist with the same analytical challenges faced when assaying environmental samples. It was decided that radionuclide bearing natural materials should be collected from sites where there had been sufficient time for natural processes to redistribute the various chemically different species of the radionuclides. Over the succeeding years, the National Institute of Standards and Technology (NIST), in cooperation with other highly experienced laboratories, certified and issued a number of these as low-level radioactivity Standard Reference Materials (SRMs) for fission and activation product and actinide concentrations. The experience of certifying these SRMs has given NIST the opportunity to compare radioanalytical methods and learn of their limitations. NIST convened an international workshop in 1994 to define the natural-matrix radionuclide SRM needs for ocean studies. The highest priorities proposed at the workshop were for sediment, shellfish, seaweed, fish flesh and water matrix SRMs certified for mBq per sample concentrations of 90 Sr, 137 Cs and 239 Pu + 240 Pu. The most recent low-level environmental radionuclide SRM issued by NIST, Ocean Sediment (SRM 4357) has certified and uncertified values for the following 22 radionuclides: 40 K, 90 Sr, 129 I, 137 Cs, 155 Eu, 210 Pb, 210 Po, 212 Pb, 214 Bi, 226 Ra, 228 Ra, 228 Th, 230 Th, 232 Th, 234 U, 235 U, 237 Np, 238 U, 238 Pu, 239 Pu + 240 Pu, and 241 Am. The uncertainties for a number of the certified radionuclides are non-symmetrical and relatively large because of the non-normal distribution of reported values. NIST is continuing its efforts to provide the ocean studies community with additional natural matrix radionuclide SRMs. The freeze

The Social Context of Reference Work: Assessing the Effects of Gender and Communication Skill on Observers' Judgments of Competence.

Science.gov (United States)

Harris, Roma M.; Michell, B. Gillian

1986-01-01

Public library users made judgments about the competence of reference librarians whom they observed in videotaped interviews. Two social factors were varied in the interviews: the gender of the librarian, patron, and observers; and the communication behavior exhibited by the reference librarian toward the patron. Nineteen references are cited.…

Career Pathways for Related Service Paratherapists Working in Early Intervention and Other Education Settings.

Science.gov (United States)

Longhurst, Thomas M.

1997-01-01

Discusses issues in personnel training practices for paraprofessionals providing related services in early intervention and education settings. The term paratherapist is used to refer to paraprofessionals working under the supervision of professionals in physical therapy, occupational therapy, and speech-language pathology. Presents a philosophy…

Automatic Enhancement of the Reference Set for Multi-Criteria Sorting in The Frame of Theseus Method

Directory of Open Access Journals (Sweden)

Fernandez Eduardo

2014-05-01

Full Text Available Some recent works have established the importance of handling abundant reference information in multi-criteria sorting problems. More valid information allows a better characterization of the agent’s assignment policy, which can lead to an improved decision support. However, sometimes information for enhancing the reference set may be not available, or may be too expensive. This paper explores an automatic mode of enhancing the reference set in the framework of the THESEUS multi-criteria sorting method. Some performance measures are defined in order to test results of the enhancement. Several theoretical arguments and practical experiments are provided here, supporting a basic advantage of the automatic enhancement: a reduction of the vagueness measure that improves the THESEUS accuracy, without additional efforts from the decision agent. The experiments suggest that the errors coming from inadequate automatic assignments can be kept at a manageable level.

Basic planning and work performance of Hanford Site environmental management activities

International Nuclear Information System (INIS)

Piper, L.L.

1997-01-01

This document provides an overview of the basic planning and work of the Department of Energy Richland Operations Office (DOE-RL). It defines key terms, concepts, and processes used in Hanford's Environmental Management (EM) activities. It is not intended to provide complete details on the topics discussed. It does, however, provide a roadmap of the overall process so that opportunities for tribal, regulator, and public involvement can be clearly identified. Many documents are referenced in this plan. Each is described in some detail in Section 5, and cross-references to that section are provided throughout the discussion in Sections 1 through 4

[Levels of plasma cholinesterase in Colombian working-class populations].

Science.gov (United States)

Carmona-Fonseca, Jaime

2003-12-01

Levels of plasma cholinesterase in Colombian working-class populations Reference values for plasma cholinesterase (EC 3.1.1.8) are not available for Colombian populations. A representative sample of a working-class population was used to establish these values to provide reference data for use by the social security system. Two working-class populations were sampled from the Aburrá Valley (Aburrá) and eastern Antioquia (Oriente). Cholinesterase activity was measured in 827 workers, with ages spanning 18-49 years, 415 from Aburrá and 412 people from Oriente. Three methods were used to measure cholinesterase: Michel, EQM and Monotest The average values by Michel and EQM were not statistically different between regions (Michel: Aburrá, 1.11, and East, 1.13 deltas pH/hora; EQM: Aburrá, 2.55, and Oriente, 2.48 U/ml). By the Monotest, the enzyme average was statistically higher in Aburra than in Oriente (5,743 and 5,459 U/L respectively; p = 0 .012). By region and technique, men had significantly higher enzymatic levels than women. Within both regions and sexes, no statistically significant difference among the three aged groups was noted. Our obtained Colombian values differed significantly from foreign reference values: Michel and Monotest levels were higher and EQM levels were lower. For making clinical and epidemiologic decisions in Colombia related to these data, the values obtained for the Colombian populations are preferred over values derived from external sources.

Evaluation of the uniformity of wide circular reference source and application of correction factors; Avaliação da uniformidade de fonte extensa de referência circular e aplicação de fatores de correção

Energy Technology Data Exchange (ETDEWEB)

Silva Junior, I.A.; Xavier, M.; Siqueira, P.T.D.; Sordi, G.A.A.; Potiens, M.P.A., E-mail: iremarjr@gmail.com [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil)

2017-07-01

In this work the uniformity of wide circular reference sources is evaluated. This kind of reference source is still widely used in Brazil. In previous works wide rectangular reference sources were analyzed and it was shown the importance of the application of correction factors in calibration procedures of radiation monitors. Now a transposition of the methods used formerly is performed, evaluating the uniformities of circular reference sources and calculating the associated correction factors. (author)

Who's Who? Memory updating and character reference in children's narratives.

Science.gov (United States)

Whitely, Cristy; Colozzo, Paola

2013-10-01

The capacity to update and monitor the contents of working memory is an executive function presumed to play a critical role in language processing. The current study used an individual differences approach to consider the relationship between memory updating and accurate reference to story characters in the narratives of typically developing children. English-speaking children from kindergarten to grade 2 ( N = 63; M age = 7.0 years) completed updating tasks, short-term memory tasks, and narrative productions. The authors used multiple regression to test whether updating accounted for independent variability in referential adequacy. The capacity to update working memory was related to adequate character reference beyond the effects of age and of short-term memory capacity, with the strongest relationship emerging for maintaining reference over multiple utterances. This individual differences study is the first to show a link between updating and performance in a discourse production task for young school-age children. The findings contribute to the growing body of research investigating the role of working memory in shaping language production. This study invites extension to children of different ages and language abilities as well as to other language production tasks.

Development of standard reference samples for diffractometry

International Nuclear Information System (INIS)

Galvao, Antonio de Sant'Ana

2011-01-01

In this work, samples of standard reference materials for diffractometry of polycrystals were developed. High-purity materials were submitted to mechanical and thermal treatments in order to present the adequate properties to be used as high-quality standard reference materials for powder diffraction, comparable to the internationally recognized produced by the USA National Institute of Standards and Technology NIST, but at lower costs. The characterization of the standard materials was performed by measurements in conventional X-ray diffraction diffractometers, high resolution neutron diffraction and high-resolution synchrotron diffraction. The lattice parameters were calculated by extrapolation of the values obtained from each X-ray reflection against cos 2 θ by the Least-Squares Method. The adjustments were compared to the values obtained by the Rietveld Method, using program GSAS. The materials thus obtained were the α-alumina, yttrium oxide, silicon, cerium oxide, lanthanum hexaboride and lithium fluoride. The standard reference materials produced present quality similar or, in some cases, superior to the standard reference materials produced and commercialized by the NIST. (author)

National Provider Identifier Standard - Data Dissemination

Data.gov (United States)

U.S. Department of Health & Human Services — The National Plan and Provider Enumeration System, NPPES, downloadable file, also referred to as the NPI Downloadable File, contains FOIA disclosable NPPES health...

Development of a reference scheme for MOX lattice physics calculations

International Nuclear Information System (INIS)

Finck, P.J.; Stenberg, C.G.; Roy, R.

1998-01-01

The US program to dispose of weapons-grade Pu could involve the irradiation of mixed-oxide (MOX) fuel assemblies in commercial light water reactors. This will require licensing acceptance because of the modifications to the core safety characteristics. In particular, core neutronics will be significantly modified, thus making it necessary to validate the standard suites of neutronics codes for that particular application. Validation criteria are still unclear, but it seems reasonable to expect that the same level of accuracy will be expected for MOX as that which has been achieved for UO 2 . Commercial lattice physics codes are invariably claimed to be accurate for MOX analysis but often lack independent confirmation of their performance on a representative experimental database. Argonne National Laboratory (ANL) has started implementing a public domain suite of codes to provide for a capability to perform independent assessments of MOX core analyses. The DRAGON lattice code was chosen, and fine group ENDF/B-VI.04 and JEF-2.2 libraries have been developed. The objective of this work is to validate the DRAGON algorithms with respect to continuous-energy Monte Carlo for a suite of realistic UO 2 -MOX benchmark cases, with the aim of establishing a reference DRAGON scheme with a demonstrated high level of accuracy and no computing resource constraints. Using this scheme as a reference, future work will be devoted to obtaining simpler and less costly schemes that preserve accuracy as much as possible

Reference Services in Australian Academic Libraries are Becoming More Multifaceted, A Review of: Burke, L. “Models of Reference Services in Australian Academic Libraries.” Journal of Librarianship and Information Science 40.4 (2008: 269‐86.

Directory of Open Access Journals (Sweden)

David Herron

2009-09-01

Full Text Available Objective – To investigate the current organizational models for reference work in Australian academic libraries, and how these reference services are staffed.Design – Mixed methods.Setting – Academic universities in Australia.Subjects – Forty Council of Australian University Librarians (CAUL member libraries.Methods – A literature study was undertaken to (1 find a definition of reference services and (2 explore the development of reference service models over time. Statistics from the CAUL member libraries were studied for trends in student population and number of academic and library staff. A web‐based survey, with questions based on the findings in the literature study, was then distributed to the 40 Australian university libraries in 2006. Respondents were asked when the library commenced different reference services in five areas: formats in which the library received and responded to reference queries, information literacy, subject specialization, liaison activities, and collection development. Respondents also answered questions about the organization of the reference department, including: whether they had a separate or integrated model; the size of the reference collections; if they had a librarian dedicated to supporting students studying in remote or distant mode; if the interlibrary loans department was part of the suite of reference services; and if they had a mission or statement of purpose for their reference services department.Main Results – Based on the literature study, the working definition of reference services (1 for the project was “all activities which assist in providing relevant and appropriate information services to patrons” (270, including:•All interactions with patrons to assist them in their searches for information in all media types.•All training by librarians of patrons to be able to access information for themselves.•Activities to help the library stay informed of relevant developments

Mechanical engineer's reference book

CERN Document Server

Parrish, A

1973-01-01

Mechanical Engineer's Reference Book: 11th Edition presents a comprehensive examination of the use of Systéme International d' Unités (SI) metrication. It discusses the effectiveness of such a system when used in the field of engineering. It addresses the basic concepts involved in thermodynamics and heat transfer. Some of the topics covered in the book are the metallurgy of iron and steel; screw threads and fasteners; hole basis and shaft basis fits; an introduction to geometrical tolerancing; mechanical working of steel; high strength alloy steels; advantages of making components as castings

Developing a tool to assess motivation among health service providers working with public health system in India.

Science.gov (United States)

Purohit, Bhaskar; Maneskar, Abhishek; Saxena, Deepak

2016-04-14

Addressing the shortage of health service providers (doctors and nurses) in rural health centres remains a huge challenge. The lack of motivation of health service providers to serve in rural areas is one of the major reasons for such shortage. While many studies have aimed at analysing the reasons for low motivation, hardly any studies in India have focused on developing valid and reliable tools to measure motivation among health service providers. Hence, the objective of the study was to test and develop a valid and reliable instrument to assess the motivation of health service providers working with the public health system in India and the extent to which the motivation factors included in the study motivate health service providers to perform better at work. The present study adapted an already developed tool on motivation. The reliability and validity of the tool were established using different methods. The first stage of the tool development involved content development and assessment where, after a detailed literature review, a predeveloped tool with 19 items was adapted. However, in light of the literature review and pilot test, the same tool was modified to suit the local context by adding 7 additional items so that the final modified tool comprised of 26 items. A correlation matrix was applied to check the pattern of relationships among the items. The total sample size for the study was 154 health service providers from one Western state in India. To understand the sampling adequacy, the Kaiser-Meyer-Olkin measure of sampling adequacy and Bartlett's test of sphericity were applied and finally factor analysis was carried out to calculate the eigenvalues and to understand the relative impact of factors affecting motivation. A correlation matrix value of 0.017 was obtained narrating multi-co-linearity among the observations. Based on initial factor analysis, 8 out of 26 study factors were excluded from the study components with a cutoff range of less than

Positional reference system for ultraprecision machining

International Nuclear Information System (INIS)

Arnold, J.B.; Burleson, R.R.; Pardue, R.M.

1982-01-01

A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlledmultiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of position interferometers and part contour description data inputs to calculate error components for each axis of movement and output them to corresponding axis drives with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base

Positional reference system for ultraprecision machining

Science.gov (United States)

Arnold, J.B.; Burleson, R.R.; Pardue, R.M.

1980-09-12

A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlled-multiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of positions interferometers and part contour description data input to calculate error components for each axis of movement and output them to corresponding axis driven with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base.

IMPLEMENTATION OF THE ABC COSTING IN A SERVICES PROVIDER COMPANY

Directory of Open Access Journals (Sweden)

Luiz Ricardo Aguena Jacintho Gil de Castro

2012-12-01

Full Text Available This paper describes the implementation of the Activity-Based Cost (ABC method in a company of taxes and accounting services and outlines the positive and negative aspects encountered during implementation. It should be taken into account that this work has been developed in the fiscal area of cost verification. Bibliographical references, internal company documents and interviews with industry officials and the administrator responsible for the company were used. In the evolving of operations, the costs of the fiscal area and their main activities have been described monthly and through this information, drivers have been developed and the ABC (Activity-Based Costing method has been adopted. With the implementation it became clear that the system provides better visualization for the decision making process, it also provided learning for the company, so that the method should be used for an undetermined period of time.

Models of Reference Services in Australian Academic Libraries

Science.gov (United States)

Burke, Liz

2008-01-01

This article reports on a project which was undertaken in 2006 to investigate the current modes and methods for delivering reference services in Australian academic libraries. The project included a literature review to assist in providing a definition of reference services as well as a snapshot of statistics showing staff and patron numbers from…

Fast breeder reactor reference system classification for the ENEA data bank

International Nuclear Information System (INIS)

Righini, R.

1988-01-01

This report contains the Reference System Classification (RSC) of fast breeder reactors: it provides a functional system breakdown of the reactor. For each system the following important characteristics are reported: the main function, the mode of operation, its location in the reactor, the main interface system, its main components and the component working environment (fluid and/or atmosphere type). The RSC represent a basic step in organizing the ENEA data bank for the registration and processing of reliability data on typical fast reactor components; it provides a functional component breakdown and represent a plant-unique identification in the process of omogenization of event-data coming from different reactors. In this report it was tried to take into account different generations of nuclear power plants, different plant layouts and solutions: in particular loop and pool reactors are separately treated

Syntenic block overlap multiplicities with a panel of reference genomes provide a signature of ancient polyploidization events.

Science.gov (United States)

Zheng, Chunfang; Santos Muñoz, Daniella; Albert, Victor A; Sankoff, David

2015-01-01

Following whole genome duplication (WGD), there is a compact distribution of gene similarities within the genome reflecting duplicate pairs of all the genes in the genome. With time, the distribution broadens and loses volume due to variable decay of duplicate gene similarity and to the process of duplicate gene loss. If there are two WGD, the older one becomes so reduced and broad that it merges with the tail of the distributions resulting from more recent events, and it becomes difficult to distinguish them. The goal of this paper is to advance statistical methods of identifying, or at least counting, the WGD events in the lineage of a given genome. For a set of 15 angiosperm genomes, we analyze all 15 × 14 = 210 ordered pairs of target genome versus reference genome, using SynMap to find syntenic blocks. We consider all sets of B ≥ 2 syntenic blocks in the target genome that overlap in the reference genome as evidence of WGD activity in the target, whether it be one event or several. We hypothesize that in fitting an exponential function to the tail of the empirical distribution f (B) of block multiplicities, the size of the exponent will reflect the amount of WGD in the history of the target genome. By amalgamating the results from all reference genomes, a range of values of SynMap parameters, and alternative cutoff points for the tail, we find a clear pattern whereby multiple-WGD core eudicots have the smallest (negative) exponents, followed by core eudicots with only the single "γ" triplication in their history, followed by a non-core eudicot with a single WGD, followed by the monocots, with a basal angiosperm, the WGD-free Amborella having the largest exponent. The hypothesis that the exponent of the fit to the tail of the multiplicity distribution is a signature of the amount of WGD is verified, but there is also a clear complicating factor in the monocot clade, where a history of multiple WGD is not reflected in a small exponent.

Bibliography of references to avian botulism: Update

Science.gov (United States)

Wilson, Sonoma S.; Locke, Louis N.

1982-01-01

This bibliography, first compiled in 1970 (Allen and Wilson 1977) and published in 1977 in response to many requests for information on avian botulism, has been updated to include the literature published through 1980.In general, only articles dealing primarily with the avian disease are included, as opposed to those concerned with the various aspects of the biology of Clostridium botulinum, either type C or E. A few exceptions, such as Bengtson's report of the first isolation and description of the type C organism, are included for their historical interest. Progress reports and other administrative documents not available for distribution on request are excluded, as are most textbook accounts, which are generally summaries of work published elsewhere.This bibliography was a cooperative effort by the National Wildlife Health Laboratory, U.S. Fish and Wildlife Service, and the U.S. National Park Service. The National Park Service provided partial funding for the work through Contract No. 89100-0491.Although the authors attempted to list every important reference, they make no claim to complete coverage of the published literature. The authors will be grateful to users of the bibliography who call attention to errors or omissions.Wayne I. Jensen (Retired)Milton Friend, Director, National Wildlife Health Laboratory

Social responsibility and work conditions: building a reference label, Démarche T®.

Science.gov (United States)

Biquand, Sylvain; Zittel, Benoit

2012-01-01

Corporate Social Responsibility (CSR) is now considered in large and global companies and the recent publication of the ISO 26000 standard clarifies the targets. Based on our consultancy's experience for fifteen years in ergonomics mainly in French small and medium enterprises, we developed a label to coax and value efforts of companies in dealing with health and safety at the work place as required by ISO 26000 paragraph 6.4. The formal approach of ISO describes what should be achieved but gives no cue on how actual conditions of work should be improved. The label, called Démarche T (ie Process W where W stands for work) aims the management of work conditions as a process, giving visibility and credit to companies for their continuous involvement in the matter. We describe the items and processes that are part of our assessment. We first conduct an ergonomic diagnosis including the analysis of records on health, physical and psychological well-being, observations at the workplace and interviews with the workers. This diagnosis is followed by recommendations. The fulfillment of these is assessed yearly. Items under assessment include: - ergonomics, health and safety in the companies statements and their impact in actual project management; - relations with workers through the committee for health and safety; - actual results on health, safety and work conditions. On a local level, we give the companies passing the label a competitive edge in recruiting better candidates motivated by good work conditions, and help them fulfill ISO 26000 requirements, an increasingly decisive advantage to benefit from public regional and European support. Our paper describes the diagnosis and follow-up process.

REM-3D Reference Datasets: Reconciling large and diverse compilations of travel-time observations

Science.gov (United States)

Moulik, P.; Lekic, V.; Romanowicz, B. A.

2017-12-01

A three-dimensional Reference Earth model (REM-3D) should ideally represent the consensus view of long-wavelength heterogeneity in the Earth's mantle through the joint modeling of large and diverse seismological datasets. This requires reconciliation of datasets obtained using various methodologies and identification of consistent features. The goal of REM-3D datasets is to provide a quality-controlled and comprehensive set of seismic observations that would not only enable construction of REM-3D, but also allow identification of outliers and assist in more detailed studies of heterogeneity. The community response to data solicitation has been enthusiastic with several groups across the world contributing recent measurements of normal modes, (fundamental mode and overtone) surface waves, and body waves. We present results from ongoing work with body and surface wave datasets analyzed in consultation with a Reference Dataset Working Group. We have formulated procedures for reconciling travel-time datasets that include: (1) quality control for salvaging missing metadata; (2) identification of and reasons for discrepant measurements; (3) homogenization of coverage through the construction of summary rays; and (4) inversions of structure at various wavelengths to evaluate inter-dataset consistency. In consultation with the Reference Dataset Working Group, we retrieved the station and earthquake metadata in several legacy compilations and codified several guidelines that would facilitate easy storage and reproducibility. We find strong agreement between the dispersion measurements of fundamental-mode Rayleigh waves, particularly when made using supervised techniques. The agreement deteriorates substantially in surface-wave overtones, for which discrepancies vary with frequency and overtone number. A half-cycle band of discrepancies is attributed to reversed instrument polarities at a limited number of stations, which are not reflected in the instrument response history

[Accidents reported at the Workers' Reference Center in Ribeirão Preto, southeastern Brazil].

Science.gov (United States)

Chiodi, Mônica Bonagamba; Marziale, Maria Helena Palucci; Mondadori, Rosângela Murari; Robazzi, Maria Lúcia do Carmo Cruz

2010-06-01

This is a quantitative, descriptive study that aims to investigate work-related injuries involving exposure to biomaterial among health workers in health care units in the city of Ribeirão Preto, São Paulo, southeastern Brazil. Data was obtained from Work-Related Injury Report forms filled at the Worker's Health Reference Center in Ribeirão Preto in 2005. A total of 1,665 work-related injuries (91.7%) were reported and 151 (8.3%) were diagnosed as occupational diseases. Of the 1,665 injuries reported, 480 (28.82%) affected workers working at health care units and 153 (31.87%) were associated to biological material exposure. The situational diagnosis of occupational accidents is relevant for the development of preventive strategies by worker's health services. The results of the present study provide major indicators that allow the organization of actions following the National Network for Workers' Comprehensive Health Care (RENAST) guidelines and effectively contribute for workers health promotion.

Delusions of reference: a new theoretical model.

Science.gov (United States)

Startup, Mike; Bucci, Sandra; Langdon, Robyn

2009-03-01

Although delusions of reference are one of the most common psychotic symptoms, they have been the focus of little research, possibly because they have been considered to be integral to persecutory delusions. Evidence has now emerged that there are two kinds of delusion of reference. One of these, referential delusions of communication, which involves beliefs that others are communicating in subtle, nonverbal ways, is the focus of this paper. We present a new model designed to account for the four crucial aspects of the phenomenology of these delusions: (1) that neutral stimuli are experienced as having personal significance; (2) that the neutral stimuli are experienced as communicating a message nonverbally; (3) that the content of the message concerns the self; (4) that the experience of a self-referent communication is believed rather than being dismissed as implausible. We used PsycINFO and Scopus, using the term "delusion* of reference", to search for publications with a bearing on our model. The amount of research we found that was designed to test aspects of this model is small but other published research appears to provide some support for its various steps. Much of this research was not explicitly intended to provide an account of delusions of reference but its relevance nevertheless seems clear. There is preliminary support for the plausibility of our model but much additional research is needed. We conclude by summarising what we consider to be the main desiderata.

Reference document 2001. A (AREVA) for..; Document de reference 2001. A (AREVA) comme..

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

This reference document 2001, on the group Areva, provides data and information on the Areva emerges, overview of operations, sustainable development policy, research and development programs, nuclear power activities (front-end, reactors and services back-end divisions), components (connectors division and STMicroelectronics, human resources, share data and financial information (financial report 2001, financial report first-half 2002). (A.L.B.)

Program reference schedule baseline

International Nuclear Information System (INIS)

1986-07-01

This Program Reference Schedule Baseline (PRSB) provides the baseline Program-level milestones and associated schedules for the Civilian Radioactive Waste Management Program. It integrates all Program-level schedule-related activities. This schedule baseline will be used by the Director, Office of Civilian Radioactive Waste Management (OCRWM), and his staff to monitor compliance with Program objectives. Chapter 1 includes brief discussions concerning the relationship of the PRSB to the Program Reference Cost Baseline (PRCB), the Mission Plan, the Project Decision Schedule, the Total System Life Cycle Cost report, the Program Management Information System report, the Program Milestone Review, annual budget preparation, and system element plans. Chapter 2 includes the identification of all Level 0, or Program-level, milestones, while Chapter 3 presents and discusses the critical path schedules that correspond to those Level 0 milestones

The ambiguous role of healthcare providers: a new perspective in Human Resources Management.

Science.gov (United States)

Panari, Chiara; Levati, W; Bonini, A; Tonelli, M; Alfieri, E; Artioli, Giovanna

2016-05-26

A strategic Human Resources Management approach, that overcomes anadministrative Personnel Management, is becoming crucial for hospital organizations. In this sense, the aimof this work was to examine the figure of healthcare provider using the concept of role, as expected behaviourin term of integration in the organizational culture. The instrument used to analyse the healthcareprovider figure was "role mapping". Particularly, semistructured interviews were conducted and involved to36 health professionals of four units in order to examine the behaviour expectations system towards thehealthcare providers. The analysis revealed that the expectations of different professionals relatedto the healthcare provider were dissimilar. Physicians' expectations referred to technical preparation and efficiency,while nurses and nurse coordinators required collaboration in equip work and emotional support forpatients. In all Operating Units, directors were perceived as missing persons with vague expectations of efficiency.Differences concerned also the four Units. For example, in intensive care Unit, the role of healthcareprovider was clearer and this figure was perceived as essential for patients' care and for the equip teamwork.On the contrary, in Recovery Unit the healthcare provider was underestimated, the role was ambiguous andnot integrated in the equip even if there was a clear division of tasks between nurses and healthcare providers. The "role mapping" instrument allows to identify healthcare provider profile and find possible roleambiguity and conflicts in order to plan adequate human resources management interventions.

Expertise and Intuitions about Reference

Directory of Open Access Journals (Sweden)

Edouard Machery

2012-01-01

Full Text Available Many philosophers hold that experts’ semantic intuitions are more reliable and provide better evidence than lay people’s intuitions—a thesis commonly called “the Expertise Defense.” Focusing on the intuitions about the reference of proper names, this article critically assesses the Expertise Defense.

Reference materials and interlaboratory comparison for actinide analysis

Energy Technology Data Exchange (ETDEWEB)

Hanssens, Alain; Viallesoubranne, Carole; Roche, Claude; Liozon, Gerard [Commissariat a l' Energie Atomique, Marcoule: BP 17171, 30207 Bagnols sur Ceze (France)

2008-07-01

Measurement quality is crucial for the safety of nuclear facilities and is a primary requirement for fissile material monitoring and accountancy. CETAMA (Cea Committee for the establishment of analysis methods), in collaboration with Cea and AREVA laboratories, fabricates certified reference materials and organizes interlaboratory comparison programs for plutonium and uranium assay in solution. A new plutonium metal measurement standard (MP3) is currently being prepared by Cea and is a subject of cooperative work in view of its certification and use by analysis laboratories. U and Pu interlaboratory comparisons are carried out at regular intervals on benchmark samples in coordination with working groups from French nuclear laboratories. These programs are supported by international cooperation. 'Chemical' methods (potentiometry, gravimetric analysis, etc.) generally provide the best accuracy. Coulometry is the benchmark technique for plutonium assay: its metrological qualities should be an incentive for wider use by laboratories performing precise control assays of plutonium as well as uranium. Gravimetric analysis provides excellent results for analysis of pure uranyl nitrate solutions. In view of its many advantages we encourage laboratories to employ this technique to assay pure U or Pu solutions. 'Physical' or 'physicochemical' methods are increasingly used, and their performance has improved. K-edge absorption spectrometry and isotope dilution mass spectrometry are capable of reaching measurement quality levels comparable to those of the best 'chemical' methods. (authors)

Job satisfaction of nurses with working conditions in Czech hospitals

OpenAIRE

Slámová, Hana

2007-01-01

This theses refers to basic terms of job satisfaction and factors with impact on it. The work refers further to factors of working environment with influence on job satisfaction of nurses. The work describes job satisfaction from global view. Job satifaction and satisfaction in life have close relationship and own manifestation.

Investigating Learning through Work: The Development of the "Provider Learning Environment Scale"

Science.gov (United States)

Chappell, Clive; Hawke, Geof

2008-01-01

The purpose of this research activity was to investigate contemporary understandings of the connections between learning and work. This initial work was then used to inform the development of an organisational tool that registered training organisations (RTOs) could use to identify organisational practices likely to lead to greater learning at…

An outline of reference materials for analysis techniques in China

International Nuclear Information System (INIS)

Zhang Yuanxun; Qian Yine; Zhang Yongping; Tong Yongpeng

1994-01-01

This paper provides background information on the development in the field of reference materials in China. The major considerations in development of reference materials include homogeneity, stability, handling procedures and certification. Further it discusses the plans for development in the near future specific natural-matrix reference materials containing low levels of trace elements and having high degree of homogeneity

An outline of reference materials for analysis techniques in China

Energy Technology Data Exchange (ETDEWEB)

Yuanxun, Zhang; Yine, Qian; Yongping, Zhang; Yongpeng, Tong [Shanghai Institute of Nuclear Research, Academia Sinica (China)

1994-07-01

This paper provides background information on the development in the field of reference materials in China. The major considerations in development of reference materials include homogeneity, stability, handling procedures and certification. Further it discusses the plans for development in the near future specific natural-matrix reference materials containing low levels of trace elements and having high degree of homogeneity.

Von der Pionierarbeit zum Nachschlagewerk From Pioneering Work to Reference Work

Directory of Open Access Journals (Sweden)

Sylvia Mieszkowski

2006-11-01

Full Text Available 1995 erschien der von Hadumod Bußmann und Renate Hof herausgegebene Sammelband Genus. Zur Geschlechterdifferenz in den Kulturwissenschaften. Zum 10jährigen Jubiläum haben sich die beiden Herausgeberinnen noch einmal mit dem Kröner Verlag zusammengetan, haben teils dieselben, teils neue Autorinnen um sich geschart und Genus einen neuen Auftritt verschafft. Der aktuelle Untertitel benennt die Erweiterung, die statt einer bloßen Aktualisierung des ersten Bandes vorgenommen wurde: Geschlechterforschung/Gender Studies in den Kultur- und Sozialwissenschaften. Ein Handbuch.The collected volume Genus. On Gender Difference in Cultural Studies (Genus. Zur Geschlechterdifferenz in den Kulturwissenschaften, edited by Hadumod Bußmann and Renate Hof, was published in 1995. In honor of ten years of publication both editors came together with the publishing house Kröner Verlag once again, bringing with them some of the same as well as some new authors, in order to provide Genus a renewed appearance on the academic stage. Instead of merely revising the original volume, the editors planned its expansion. The subtitle points to the result: Gender Studies in Culture and Social Studies. A Handbook (Geschlechterforschung/Gender Studies in den Kultur- und Sozialwissenschaften. Ein Handbuch.

SharePoint 2010 Administration Instant Reference

CERN Document Server

Williams, Randy

2011-01-01

Fast, accurate answers on SharePoint 2010 administration-in an instant If you're a SharePoint administrator and are looking for fast, accurate, easy-to-understand answers and solutions, then this reference is for you. Thumb tabs, secondary and tertiary tables of contents, and special heading treatments ensure quick and easy ways to find practical solutions on the spot. In addition, quick-reference tables, lists, and step-by-step instruction provide even more helpful information on the day-to-day administration of Microsoft's newest collaboration solution.Features invaluable answers and solutio

Roadmap to a mutually consistent set of offshore vertical reference frames

NARCIS (Netherlands)

Slobbe, D.C.

2013-01-01

This thesis presents a combined approach for the realization of the (quasi-)geoid as a height reference surface and the vertical reference surface at sea (chart datum). This approach, specifically designed for shallow seas and coastal waters, provides the relation between the two vertical reference

[Reconciling activities of working women providing care and the influence of structural and cultural factors].

Science.gov (United States)

Preuß, M

2015-07-01

Today, an increasing proportion of society has to reconcile eldercare and work. This task poses challenges for them, which they meet through an adjustment of their everyday living arrangements. These coping strategies have been so far scarcely noted within research on the reconciliation of elder care and employment. Knowledge about the active dealing with this parallel involvement in both spheres of life is of vital importance when wanting to derive precisely tailored support measures for employed care givers. A goal of this article is to deliver insight on reconciling activities of employed women who provide care, while it tries to specify respective factors which determine those actions. Moreover, an ideal typology is presented, which systematizes these associations. With this ideal typology, conceptual instruments have been developed which illustrate the complex reality of the reconciliation actions and the dependence on various coping resources. In gerontological practice, these findings may provide support to design an intervention strategy tailored to the individual situation that addresses the everyday level of action and strengthens the performance of those affected.

Universal electronic-cigarette test: physiochemical characterization of reference e-liquid

Directory of Open Access Journals (Sweden)

Jeffrey J. Kim

2017-02-01

The efforts described here to create a standardized e-liquid Reference Material aim to provide unbiased and robust testing parameters that may be useful for researchers, the industry and government agencies. Additionally, the reference e-liquid could open a channel of conversation among different laboratories by providing the means of independent verification and validation while establishing a system of transparency and reproducibility in materials and methods.

Mission IM-Possible: Starting an Instant Message Reference Service Using Trillian

Science.gov (United States)

Ciocco, Ronalee; Huff, Alice

2007-01-01

The authors, both of whom are working at the Musselman library, relate how they are always looking for ways to improve and update their reference service. When they introduced a chat reference service to their online library services, they received only four inquiries in the entire year 2002-2003. The authors found out later that the paltry number…

Traceable calibration of photovoltaic reference cells using natural sunlight

Science.gov (United States)

Müllejans, H.; Zaaiman, W.; Pavanello, D.; Dunlop, E. D.

2018-02-01

At the European Solar Test Installation (ESTI) photovoltaic (PV) reference cells are calibrated traceably to SI units via the World Radiometric Reference (WRR) using natural sunlight. The Direct Sunlight Method (DSM) is described in detail and the latest measurement results and an updated uncertainty budget are reported. These PV reference cells then provide a practical means for measuring the irradiance of natural or simulated sunlight during the calibration of other PV devices.

Conversion of ICRP male reference phantom to polygon-surface phantom

Science.gov (United States)

Yeom, Yeon Soo; Han, Min Cheol; Kim, Chan Hyeong; Jeong, Jong Hwi

2013-10-01

The International Commission on Radiological Protection (ICRP) reference phantoms, developed based on computed tomography images of human bodies, provide much more realism of human anatomy than the previously used MIRD5 (Medical Internal Radiation Dose) mathematical phantoms. It has been, however, realized that the ICRP reference phantoms have some critical limitations showing a considerable amount of holes for the skin and wall organs mainly due to the nature of voxels of which the phantoms are made, especially due to their low voxel resolutions. To address this problem, we are planning to develop the polygon-surface version of ICRP reference phantoms by directly converting the ICRP reference phantoms (voxel phantoms) to polygon-surface phantoms. The objective of this preliminary study is to see if it is indeed possible to construct the high-quality polygon-surface phantoms based on the ICRP reference phantoms maintaining identical organ morphology and also to identify any potential issues, and technologies to address these issues, in advance. For this purpose, in the present study, the ICRP reference male phantom was roughly converted to a polygon-surface phantom. Then, the constructed phantom was implemented in Geant4, Monte Carlo particle transport code, for dose calculations, and the calculated dose values were compared with those of the original ICRP reference phantom to see how much the calculated dose values are sensitive to the accuracy of the conversion process. The results of the present study show that it is certainly possible to convert the ICRP reference phantoms to surface phantoms with enough accuracy. In spite of using relatively less resources (original ICRP reference phantoms, it is believed that the polygon-surface version of ICRP reference phantoms properly developed will not only provide the same or similar dose values (say, difference <5 or 10%) for highly penetrating radiations, but also provide correct dose values for the weakly penetrating

UniPrime2: a web service providing easier Universal Primer design.

Science.gov (United States)

Boutros, Robin; Stokes, Nicola; Bekaert, Michaël; Teeling, Emma C

2009-07-01

The UniPrime2 web server is a publicly available online resource which automatically designs large sets of universal primers when given a gene reference ID or Fasta sequence input by a user. UniPrime2 works by automatically retrieving and aligning homologous sequences from GenBank, identifying regions of conservation within the alignment, and generating suitable primers that can be used to amplify variable genomic regions. In essence, UniPrime2 is a suite of publicly available software packages (Blastn, T-Coffee, GramAlign, Primer3), which reduces the laborious process of primer design, by integrating these programs into a single software pipeline. Hence, UniPrime2 differs from previous primer design web services in that all steps are automated, linked, saved and phylogenetically delimited, only requiring a single user-defined gene reference ID or input sequence. We provide an overview of the web service and wet-laboratory validation of the primers generated. The system is freely accessible at: http://uniprime.batlab.eu. UniPrime2 is licenced under a Creative Commons Attribution Noncommercial-Share Alike 3.0 Licence.

Stress at Work Place

OpenAIRE

Mohammad A. Shahrour

2010-01-01

One of hardest forms of stresses to avoid is that work place or job stress Job stress refers to stress experienced by an individual at or because of issues at their work place The term work related stress has many meanings and it causes different levels of anxiety. Not all challenges at work can be called stress as some of these challenges drive employees upward, and empower them to learn new skills or push them to work harder to achieve a certain goal. So, this type of challenges cannot be c...

Reconfigurable assembly work station

Energy Technology Data Exchange (ETDEWEB)

Lin, Yhu-Tin; Abell, Jeffrey A.; Spicer, John Patrick

2017-11-14

A reconfigurable autonomous workstation includes a multi-faced superstructure including a horizontally-arranged frame section supported on a plurality of posts. The posts form a plurality of vertical faces arranged between adjacent pairs of the posts, the faces including first and second faces and a power distribution and position reference face. A controllable robotic arm suspends from the rectangular frame section, and a work table fixedly couples to the power distribution and position reference face. A plurality of conveyor tables are fixedly coupled to the work table including a first conveyor table through the first face and a second conveyor table through the second face. A vision system monitors the work table and each of the conveyor tables. A programmable controller monitors signal inputs from the vision system to identify and determine orientation of the component on the first conveyor table and control the robotic arm to execute an assembly task.

Part B Excess Cost Quick Reference Document

Science.gov (United States)

Ball, Wayne; Beridon, Virginia; Hamre, Kent; Morse, Amanda

2011-01-01

This Quick Reference Document has been prepared by the Regional Resource Center Program ARRA/Fiscal Priority Team to aid RRCP State Liaisons and other (Technical Assistance) TA providers in understanding the general context of state questions surrounding excess cost. As a "first-stop" for TA providers in investigating excess cost…

Preparation of reference material for the measurement of natural radioactivity

International Nuclear Information System (INIS)

Ben Tekaya, Malik

2010-01-01

The objective of this work is to prepare reference material for the calibration of gamma spectrometry, alpha and XRF .Many procedures of chemical preparation and radiological analysis of a reference material from Triple Superphosphate were tested. Several techniques and methods of measurement were used. In addition to a description and validation of these procedures, a study of repeatability was conducted which resulted in a positive characterization of this material.

Persons with Drug Addiction as Knowledge Providers: Their Contribution to Social Work Education

Science.gov (United States)

Shor, Ron; Levit, Shabtay

2012-01-01

Social work students' stereotypical perceptions of excluded populations could be decisive in the way they treat those who are excluded. In an attempt to change such perceptions and enhance knowledge about how to work with an excluded population, a dialogue-in-class model was implemented between students of social work in Israel and persons with…

Reference values and evaluation of the results of intercomparisons

International Nuclear Information System (INIS)

Aigner, H.; Deron, S.; Kuhn, E.

1981-01-01

The need of a reference value for the composition of materials distributed in intercomparisons is generally recognized. A single reference laboratory or a group of reference laboratories may be used to establish this reference value. The respective advantages and limitations of the two approaches are discussed. The reference measurements must be evaluated to provide the confidence limits of the reference value but also an estimate of the possible heterogeneity of the materials and its samples. The results of the intercomparison measurements should themselves be evaluated to test and discuss the significance of the biases of individual and selected groups of laboratories or techniques. The approach taken by the Analytical Quality Control Services of the International Atomic Energy Agency is illustrated by the SR-1 intercomparison on uranium assay in UO 2 powder

Usefulness of herbal and dietary supplement references.

Science.gov (United States)

Sweet, Burgunda V; Gay, Wendy E; Leady, Michelle A; Stumpf, Janice L

2003-04-01

To describe the usefulness of some of the most common tertiary references that healthcare professionals employ to answer requests about herbal and dietary supplements. All requests for information on herbal and dietary supplements received by the drug information service between April and September 2000 were evaluated. Each question was independently reviewed by 4 clinicians using a 4-point scale; 14 references were searched for appropriate answers. The percent of responses for each of the possible scores for each reference overall and by category of question was reported to determine the most helpful references for answering the broadest range of questions. Fifty questions regarding herbal and dietary supplements were analyzed. The electronic databases (Natural Medicine Comprehensive Database, Micromedex) and the Internet site (The Natural Pharmacist) were determined to be overall the most helpful references for providing information on herbal and dietary supplements. The Natural Therapeutics Pocket Guide was the most helpful book reference. These results will facilitate the retrieval of useful information on herbal and dietary supplements and enable healthcare professionals to determine appropriate allocation of resources as they build a drug information library for handling requests about these products.

Shakespeare: A Student's Guide to Basic Reference Sources.

Science.gov (United States)

Claener, Anne, Comp.

Basic and standard reference materials dealing with William Shakespeare are listed in this bibliography. Annotated entries are grouped under the following headings: concordances, dictionaries, encyclopedias and handbooks, and bibliographies. The section on bibliographies is further divided into lists of editions of Shakespeare's work, general…

Reference Etiquette: A Guide to Excruciatingly Correct Behavior.

Science.gov (United States)

Eckwright, Gail Z.; Pollastro, Mike; Hoskisson, Tam

1998-01-01

Presents suggestions for smooth and satisfying transactions between reference librarians and patrons, as well as for better collegial relationships. Highlights include: being prepared to help patrons; staying visible; serving "who's next"; working together and allowing for personal styles; making referrals; and using diplomacy while correcting…

Initiative to manufacture and characterize Baculovirus Reference Material

NARCIS (Netherlands)

Kamen, A.; Aucoin, M.; Merten, O.W.; Alves, P.C.M.; Hashimoto, Y.; Airenne, K.; Hu, Y.C.; Mezzina, M.; Oers, van M.M.

2011-01-01

This letter to the editor brings to the attention of researchers an initiative to develop a baculovirus reference material repository. To be successful this initiative needs the support of a broad panel of researchers working with baculovirus vectors for recombinant protein production and gene

Documentscape: Intertextuality, Sequentiality & Autonomy at Work

DEFF Research Database (Denmark)

Christensen, Lars Rune; Bjørn, Pernille

2014-01-01

On the basis of an ethnographic field study, this article introduces the concept of documentscape to the analysis of document-centric work practices. The concept of documentscape refers to the entire ensemble of documents in their mutual intertextual interlocking. Providing empirical data from...... a global software development case, we show how hierarchical structures and sequentiality across the interlocked documents are critical to how actors make sense of the work of others and what to do next in a geographically distributed setting. Furthermore, we found that while each document is created...... as part of a quasi-sequential order, this characteristic does not make the document, as a single entity, into a stable object. Instead, we found that the documents were malleable and dynamic while suspended in intertextual structures. Our concept of documentscape points to how the hierarchical structure...

XSLT 10 Pocket Reference

CERN Document Server

Lenz, Evan

2008-01-01

XSLT is an essential tool for converting XML into other kinds of documents: HTML, PDF file, and many others. It's a critical technology for XML-based platforms such as Microsoft .NET, Sun Microsystems' Sun One, as well as for most web browsers and authoring tools. As useful as XSLT is, however, most people have a difficult time getting used to its peculiar characteristics. The ability to use advanced techniques depends on a clear and exact understanding of how XSLT templates work and interact. The XSLT 1.0 Pocket Reference from O'Reilly wants to make sure you achieve that level of understan

Virtual Reference Services through Web Search Engines: Study of Academic Libraries in Pakistan

Directory of Open Access Journals (Sweden)

Rubia Khan

2017-03-01

Full Text Available Web search engines (WSE are powerful and popular tools in the field of information service management. This study is an attempt to examine the impact and usefulness of web search engines in providing virtual reference services (VRS within academic libraries in Pakistan. The study also attempts to investigate the relevant expertise and skills of library professionals in providing digital reference services (DRS efficiently using web search engines. Methodology used in this study is quantitative in nature. The data was collected from fifty public and private sector universities in Pakistan using a structured questionnaire. Microsoft Excel and SPSS were used for data analysis. The study concludes that web search engines are commonly used by librarians to help users (especially research scholars by providing digital reference services. The study also finds a positive correlation between use of web search engines and quality of digital reference services provided to library users. It is concluded that although search engines have increased the expectations of users and are really big competitors to a library’s reference desk, they are however not an alternative to reference service. Findings reveal that search engines pose numerous challenges for librarians and the study also attempts to bring together possible remedial measures. This study is useful for library professionals to understand the importance of search engines in providing VRS. The study also provides an intellectual comparison among different search engines, their capabilities, limitations, challenges and opportunities to provide VRS effectively in libraries.

Librarians without Borders? Virtual Reference Service to Unaffiliated Users

Science.gov (United States)

Kibbee, Jo

2006-01-01

The author investigates issues faced by academic research libraries in providing virtual reference services to unaffiliated users. These libraries generally welcome visitors who use on-site collections and reference services, but are these altruistic policies feasible in a virtual environment? This paper reviews the use of virtual reference…

FUNCTIONAL VALUES OF VILLAGE LIBRARY IN INHERITANCE WORKS OF LOCAL CULTURE

Directory of Open Access Journals (Sweden)

Pawit M Yusup

2017-12-01

books, magazines, newspapers, maps, brochures, and the like, both in print and digital format. These works contain a benefit for knowledge and education. Meanwhile, the library as an institution in charge of managing printed and recorded works, including ancient works, continues to contribute in this work with storage for wider dissemination. This study examines the existence of public libraries and village libraries in West Java related to its role as referred to above. The method used is direct observation to the field. The result illustrates that public libraries and village libraries already participate to provide this type of collection for the benefit of the public on the current generation and the future. Keywords: Printed Materials, Paper records, Ancient manuscripts,Cultural Values, Public Library.

Conversion of ICRP male reference phantom to polygon-surface phantom

International Nuclear Information System (INIS)

Yeom, Yeon Soo; Han, Min Cheol; Kim, Chan Hyeong; Jeong, Jong Hwi

2013-01-01

The International Commission on Radiological Protection (ICRP) reference phantoms, developed based on computed tomography images of human bodies, provide much more realism of human anatomy than the previously used MIRD5 (Medical Internal Radiation Dose) mathematical phantoms. It has been, however, realized that the ICRP reference phantoms have some critical limitations showing a considerable amount of holes for the skin and wall organs mainly due to the nature of voxels of which the phantoms are made, especially due to their low voxel resolutions. To address this problem, we are planning to develop the polygon-surface version of ICRP reference phantoms by directly converting the ICRP reference phantoms (voxel phantoms) to polygon-surface phantoms. The objective of this preliminary study is to see if it is indeed possible to construct the high-quality polygon-surface phantoms based on the ICRP reference phantoms maintaining identical organ morphology and also to identify any potential issues, and technologies to address these issues, in advance. For this purpose, in the present study, the ICRP reference male phantom was roughly converted to a polygon-surface phantom. Then, the constructed phantom was implemented in Geant4, Monte Carlo particle transport code, for dose calculations, and the calculated dose values were compared with those of the original ICRP reference phantom to see how much the calculated dose values are sensitive to the accuracy of the conversion process. The results of the present study show that it is certainly possible to convert the ICRP reference phantoms to surface phantoms with enough accuracy. In spite of using relatively less resources (<2 man-months), we were able to construct the polygon-surface phantom with the organ masses perfectly matching the ICRP reference values. The analysis of the calculated dose values also implies that the dose values are indeed not very sensitive to the detailed morphology of the organ models in the phantom

Extent of reference services to users in Ebonyi State Public Libraary ...

African Journals Online (AJOL)

Users are very satisfied with the extent of reference services provided to them by the public library studied. Findings further show that the reference section of Ebonyi State Public Library, Abakiliki is faced with the problems of inadequate reading space, equipment and furniture, reference information sources, unconducive ...

On the system of provision of ojsc "MMC 'Norilsk Nickel'" with interstate and State certified reference materials for quality control of cobalt, nickel, copper and promproducts

Directory of Open Access Journals (Sweden)

T. V. Shabelnikova

2014-01-01

Full Text Available In order to manage the quality of OJSC "MMC "Norilsk Nickel" products the Centre of Certified Reference Material Development has developed and is currently successfully implementing a system of operations provision with interstate and state certified reference materials of nickel, cobalt and copper composition. The system wholly corresponds to modern metrological requirements. The Centre of Reference Materials Development, fulfilling leading function in the field of state certified reference material production and supply to the Company's operations, aims its activity both at the development of new types of certified reference materials in the form of metals and at widening the range of synthetic oxide certified reference materials. Developed for the first time, metallic state certified reference materials of nickel, cobalt composition with certified mass fractions of oxygen, hydrogen, nitrogen, sulfur and carbon were put into practice of the Company's analytical services work. Certified reference material use provides the possibility to take into account requirements of some consumers to the quality of nickel and produce by OJSC "MMC "Norilsk Nickel" and also helps to raise competitive ability of the products on the world metals market. Over recent years the Centre fulfilled the work on the development, certification in established order, approval and entering into the State Register twenty five types of state certified reference materials. Certified reference materials are intended for fulfillment of the analysis of chemical composition of nickel, cobalt and copper in terms of their conformity with both national and international standards.

Letter in reference to: "Short-term effects of night shift work on breast cancer risk: a cohort study of payroll data".

Science.gov (United States)

Stevens, Richard G

2017-01-01

it misleads the scientific community and the public. Reference 1. Vistisen HT, Garde AH, Frydenberg M, Christiansen P, Hansen ÅM, Hansen J, Bonde JPE, Kolstad HA. Short-term effects of night shift work on breast cancer risk: a cohort study of payroll data. Scand J Work Environ Health - online first. http://dx.doi.org/10.5271/sjweh.3603.

49 CFR 214.353 - Training and qualification of roadway workers who provide on-track safety for roadway work groups.

Science.gov (United States)

2010-10-01

... RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.353 Training and qualification of roadway workers who provide on-track safety for roadway work groups. (a) The training and qualification of roadway... 49 Transportation 4 2010-10-01 2010-10-01 false Training and qualification of roadway workers who...

Perceptual quality estimation of H.264/AVC videos using reduced-reference and no-reference models

Science.gov (United States)

Shahid, Muhammad; Pandremmenou, Katerina; Kondi, Lisimachos P.; Rossholm, Andreas; Lövström, Benny

2016-09-01

Reduced-reference (RR) and no-reference (NR) models for video quality estimation, using features that account for the impact of coding artifacts, spatio-temporal complexity, and packet losses, are proposed. The purpose of this study is to analyze a number of potentially quality-relevant features in order to select the most suitable set of features for building the desired models. The proposed sets of features have not been used in the literature and some of the features are used for the first time in this study. The features are employed by the least absolute shrinkage and selection operator (LASSO), which selects only the most influential of them toward perceptual quality. For comparison, we apply feature selection in the complete feature sets and ridge regression on the reduced sets. The models are validated using a database of H.264/AVC encoded videos that were subjectively assessed for quality in an ITU-T compliant laboratory. We infer that just two features selected by RR LASSO and two bitstream-based features selected by NR LASSO are able to estimate perceptual quality with high accuracy, higher than that of ridge, which uses more features. The comparisons with competing works and two full-reference metrics also verify the superiority of our models.

Mechanical Energy Change in Inertial Reference Frames

Science.gov (United States)

Ghanbari, Saeed

2016-01-01

The mechanical energy change of a system in an inertial frame of reference equals work done by the total nonconservative force in the same frame. This relation is covariant under the Galilean transformations from inertial frame S to S', where S' moves with constant velocity relative to S. In the presence of nonconservative forces, such as normal…

An audit of competency assessments on court-referred rape survivors in South Africa.

Science.gov (United States)

Pillay, Anthony L

2008-12-01

This report concerns rape survivors with mental retardation referred by the courts for evaluation of their competencies to (i) provide testimony in court and (ii) consent to sexual intercourse. Being a relatively new area of work in South Africa, it seems important to document findings to (i) examine the challenges facing such rape survivors, (ii) inform quality improvement in this forensic mental health task, and (iii) inform and support advocacy programmes for this vulnerable group. Of 106 rape survivors referred by courts over a 3-yr. period, 91.5% were females, 21.7% were under 16 years of age, and over two-thirds were from rural communities. In 77.4% of the cases the alleged perpetrators were people they had previously seen in the community but had not befriended. Almost 80% were classified as showing Moderate or Severe Mental Retardation, and over 90% were able to testify. However, almost two-thirds were not able to make an informed decision to consent to sexual intercourse.

Diagnostic reference levels in medical imaging

International Nuclear Information System (INIS)

Rosenstein, M.

2001-01-01

The paper proposes additional advice to national or local authorities and the clinical community on the application of diagnostic reference levels as a practical tool to manage radiation doses to patients in diagnostic radiology and nuclear medicine. A survey was made of the various approaches that have been taken by authoritative bodies to establish diagnostic reference levels for medical imaging tasks. There are a variety of ways to implement the idea of diagnostic reference levels, depending on the medical imaging task of interest, the national or local state of practice and the national or local preferences for technical implementation. The existing International Commission on Radiological Protection (ICRP) guidance is reviewed, the survey information is summarized, a set of unifying principles is espoused and a statement of additional advice that has been proposed to ICRP Committee 3 is presented. The proposed advice would meet a need for a unifying set of principles to provide a framework for diagnostic reference levels but would allow flexibility in their selection and use. While some illustrative examples are given, the proposed advice does not specify the specific quantities to be used, the numerical values to be set for the quantities or the technical details of how national or local authorities should implement diagnostic reference levels. (author)

International Geomagnetic Reference Field: the 12th generation

DEFF Research Database (Denmark)

Thébault, Erwan; Finlay, Chris; Beggan, Ciarán D.

2015-01-01

The 12th generation of the International Geomagnetic Reference Field (IGRF) was adopted in December 2014 by the Working Group V-MOD appointed by the International Association of Geomagnetism and Aeronomy (IAGA). It updates the previous IGRF generation with a definitive main field model for epoch ...

Case report: a work simulation program for a manual worker with a fracture injury.

Science.gov (United States)

Chan, Chi-Chung; Chow, Jonathan H.W.

2000-01-01

Work rehabilitation programs targeting different client groups are available in nearly all major hospital occupational therapy departments in Hong Kong. Clients receiving work rehabilitation are referred from various out-patient clinics and other occupational therapists. Those clients experience limitation in work after their injuries or diseases and plan to return to work after rehabilitation. Program objectives are 1) to assist clients to reach maximum work capacity as rapidly as possible 2) to ensure clients return to work safely 3) to improve clients' work readiness. This case report describes an individualized work simulation program at a general hospital in Hong Kong provided for a typical client who is preparing to return to his worker role. Specific job analysis, goals and program rationale for the client are discussed.

Vulnerability and agency: beyond an irreconcilable dichotomy for social service providers working with young refugees in the UK.

Science.gov (United States)

O'Higgins, Aoife

2012-01-01

Many young refugees face significant difficulties in securing support from social services providers. This study invited 21 young refugees aged 16 to 21 to take part in focus groups and follow-up interviews about their experiences of accessing this support. The findings reveal that young refugees may deliberately conform to expectations about their vulnerability in order to benefit from greater support from service providers. Social workers may fail to consider young refugees' abilities and understand the ways in which each individual is vulnerable. The study suggests that group work may be an effective way to engage young refugees to overcome this. Copyright © 2012 Wiley Periodicals, Inc., A Wiley Company.

Country report from Japan: Activities of NIRS as a central reference laboratory

International Nuclear Information System (INIS)

Kawamura, H.; Shiraishi, K.; Ozawa, K.; Arae, H.; Yukawa, M.

2000-01-01

As agreed upon at the Project Formulation Meeting and the First Research Co-ordination Meeting, functions of the central reference laboratory (CRL) in assistance to the Agency were assigned to National Institute of Radiological Sciences (NIRS). Therefore, we have been making utmost efforts, aside from our own research activities concerning the current CRP, to cope with the following assignments, in which we are supported through the Science and Technology Agency of Japan. There was some delay in the progress for the planned distribution of three Reference Materials for internal quality control (QC) and preparation in Japan of the reference diet material of an Asian composition. However, training of fellow research workers of the CRP and associated co-operation that were requested by some of the participants, were satisfactorily carried out. During the next 18 months, we foresee (a) analysis of '10% samples' sent by the participants for external QC, (b) backup analysis of some number of samples for the first priority elements for some participants, and (c) distribution of the Japanese reference diet material when it is prepared, to accelerate progress of the CRP as originally planned. We are putting an emphasis on the strong will to completing the Project to provide researchers worldwide with essential data for metabolism of the elements of importance in internal dosimetry and Reference Man. It should be noted, however, the CRL is moving from its present location to the Chiba campus, about 130 km to the south by car, sometime during 1999. Due to the relocation process, our analytical work will probably be interrupted for a month or two

Consistent Feature Extraction From Vector Fields: Combinatorial Representations and Analysis Under Local Reference Frames

Energy Technology Data Exchange (ETDEWEB)

Bhatia, Harsh [Univ. of Utah, Salt Lake City, UT (United States)

2015-05-01

This dissertation presents research on addressing some of the contemporary challenges in the analysis of vector fields—an important type of scientific data useful for representing a multitude of physical phenomena, such as wind flow and ocean currents. In particular, new theories and computational frameworks to enable consistent feature extraction from vector fields are presented. One of the most fundamental challenges in the analysis of vector fields is that their features are defined with respect to reference frames. Unfortunately, there is no single “correct” reference frame for analysis, and an unsuitable frame may cause features of interest to remain undetected, thus creating serious physical consequences. This work develops new reference frames that enable extraction of localized features that other techniques and frames fail to detect. As a result, these reference frames objectify the notion of “correctness” of features for certain goals by revealing the phenomena of importance from the underlying data. An important consequence of using these local frames is that the analysis of unsteady (time-varying) vector fields can be reduced to the analysis of sequences of steady (timeindependent) vector fields, which can be performed using simpler and scalable techniques that allow better data management by accessing the data on a per-time-step basis. Nevertheless, the state-of-the-art analysis of steady vector fields is not robust, as most techniques are numerical in nature. The residing numerical errors can violate consistency with the underlying theory by breaching important fundamental laws, which may lead to serious physical consequences. This dissertation considers consistency as the most fundamental characteristic of computational analysis that must always be preserved, and presents a new discrete theory that uses combinatorial representations and algorithms to provide consistency guarantees during vector field analysis along with the uncertainty

Certification for copper concentration in reference material for fuel anhydro ethylic alcohol; Certificacao da concentracao de cobre em material de referencia para alcool etilico anidro combustivel (AEC)

Energy Technology Data Exchange (ETDEWEB)

Reis, Lindomar Augusto dos; Rocha, Marcia Silva da; Mesko, Marcia Foster; Silva, Fagner Francisco da; Quaresma, Maria Cristina Baptista; Araujo, Thiago Oliveira [Instituto Nacional de Metrologia, Normalizacao e Qualidade Industrial (DIMCI/INMETRO), Duque de Caxias, RJ (Brazil). Diretoria de Metrologia Cientifica e Industrial], E-mail: lareis@inmetro.gov.br

2009-07-01

This work aiming to obtain the first certified reference material for fuel anhydro ethylic alcohol relative to the copper concentration, which has his maximum limit determined by the in force legislation providing traceability and reliability for the measurement results.

Canadian Reference Sources 1980--A Selection.

Science.gov (United States)

Ryder, Dorothy E.

1981-01-01

Provides a bibliography of 52 reference sources and 24 new editions and supplements, excluding annuals. Topics include science and technology, art, history, university courses, regional information, native languages, museums, law, geography, Canadian culture, dissertations, sports, antiques, botany, and a variety of directories. (CHC)

Apache 2 Pocket Reference For Apache Programmers & Administrators

CERN Document Server

Ford, Andrew

2008-01-01

Even if you know the Apache web server inside and out, you still need an occasional on-the-job reminder -- especially if you're moving to the newer Apache 2.x. Apache 2 Pocket Reference gives you exactly what you need to get the job done without forcing you to plow through a cumbersome, doorstop-sized reference. This Book provides essential information to help you configure and maintain the server quickly, with brief explanations that get directly to the point. It covers Apache 2.x, giving web masters, web administrators, and programmers a quick and easy reference solution. This pocket r

Managing the twenty-first century reference department challenges and prospects

CERN Document Server

Katz, Linda S

2014-01-01

Learn the skills needed to update and manage a reference department that efficiently meets the needs of clients today?and tomorrow! Managing the Twenty-First Century Reference Department: Challenges and Prospects provides librarians with the knowledge and skills they need to manage an effective reference service. Full of useful and practical ideas, this book presents successful methods for recruiting and retaining capable reference department staff and management, training new employees and adapting current services to an evolving field. Expert practitioners address the changing role of the r

Coal Data: A reference

International Nuclear Information System (INIS)

1991-01-01

The purpose of Coal Data: A Reference is to provide basic information on the mining and use of coal, an important source of energy in the United States. The report is written for a general audience. The goal is to cover basic material and strike a reasonable compromise between overly generalized statements and detailed analyses. The section ''Coal Terminology and Related Information'' provides additional information about terms mentioned in the text and introduces new terms. Topics covered are US coal deposits, resources and reserves, mining, production, employment and productivity, health and safety, preparation, transportation, supply and stocks, use, coal, the environment, and more. (VC)

Expert system application for prioritizing preventive actions for shift work: shift expert.

Science.gov (United States)

Esen, Hatice; Hatipoğlu, Tuğçen; Cihan, Ahmet; Fiğlali, Nilgün

2017-09-19

Shift patterns, work hours, work arrangements and worker motivations have increasingly become key factors for job performance. The main objective of this article is to design an expert system that identifies the negative effects of shift work and prioritizes mitigation efforts according to their importance in preventing these negative effects. The proposed expert system will be referred to as the shift expert. A thorough literature review is conducted to determine the effects of shift work on workers. Our work indicates that shift work is linked to demographic variables, sleepiness and fatigue, health and well-being, and social and domestic conditions. These parameters constitute the sections of a questionnaire designed to focus on 26 important issues related to shift work. The shift expert is then constructed to provide prevention advice at the individual and organizational levels, and it prioritizes this advice using a fuzzy analytic hierarchy process model, which considers comparison matrices provided by users during the prioritization process. An empirical study of 61 workers working on three rotating shifts is performed. After administering the questionnaires, the collected data are analyzed statistically, and then the shift expert produces individual and organizational recommendations for these workers.

Citations and references as keys to relevance ranking in interactive IR

DEFF Research Database (Denmark)

Ingwersen, Peter

2012-01-01

According to the principle of Polyrepresentation (Ingwersen & Järvelin, 2005; Ingwersen, 2012) bibliographic references in scientific documents as well as citations to documents have the potential of serving as useful features for re-ranking of retrieved documents. References (and thus citations...... been demonstrated to improve retrieval performance (Skov et al. 2008), whereas the number of citations has not provided similar improvements. The presentation will discuss the following phenomena and characteristics of references and citations as means for relevance re-ranking: 1) Are academic...... references (and thus citations) associated with relevance? 2) What are their potentials for IR? 3) What are their limitations? The presentation will propose a range of potentials and provide an initial research design. Selected cases are exemplified from the Web of Science database....

Considerations for reference pump curves

International Nuclear Information System (INIS)

Stockton, N.B.

1992-01-01

This paper examines problems associated with inservice testing (IST) of pumps to assess their hydraulic performance using reference pump curves to establish acceptance criteria. Safety-related pumps at nuclear power plants are tested under the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (the Code), Section 11. The Code requires testing pumps at specific reference points of differential pressure or flow rate that can be readily duplicated during subsequent tests. There are many cases where test conditions cannot be duplicated. For some pumps, such as service water or component cooling pumps, the flow rate at any time depends on plant conditions and the arrangement of multiple independent and constantly changing loads. System conditions cannot be controlled to duplicate a specific reference value. In these cases, utilities frequently request to use pump curves for comparison of test data for acceptance. There is no prescribed method for developing a pump reference curve. The methods vary and may yield substantially different results. Some results are conservative when compared to the Code requirements; some are not. The errors associated with different curve testing techniques should be understood and controlled within reasonable bounds. Manufacturer's pump curves, in general, are not sufficiently accurate to use as reference pump curves for IST. Testing using reference curves generated with polynomial least squares fits over limited ranges of pump operation, cubic spline interpolation, or cubic spline least squares fits can provide a measure of pump hydraulic performance that is at least as accurate as the Code required method. Regardless of the test method, error can be reduced by using more accurate instruments, by correcting for systematic errors, by increasing the number of data points, and by taking repetitive measurements at each data point

User satisfaction with referrals at a collaborative virtual reference service Virtual reference services, Reference services, Referrals, User satisfaction

Directory of Open Access Journals (Sweden)

Nahyun Kwon

2006-01-01

Full Text Available Introduction. This study investigated unmonitored referrals in a nationwide, collaborative chat reference service. Specifically, it examined the extent to which questions are referred, the types of questions that are more likely to be referred than others, and the level of user satisfaction with the referrals in the collaborative chat reference service. Method. The data analysed for this study were 420 chat reference transaction transcripts along with corresponding online survey questionnaires submitted by the service users. Both sets of data were collected from an electronic archive of a southeastern state public library system that has participated in 24/7 Reference of the Metropolitan Cooperative Library System (MCLS. Results. Referrals in the collaborative chat reference service comprised approximately 30% of the total transactions. Circulation-related questions were the most often referred among all question types, possibly because of the inability of 'outside' librarians to access patron accounts. Most importantly, user satisfaction with referrals was found to be significantly lower than that of completed answers. Conclusion. The findings of this study addressed the importance of distinguishing two types of referrals: the expert research referrals conducive to collaborative virtual reference services; and the re-directional local referrals that increase unnecessary question traffic, thereby being detrimental to effective use of collaborative reference. Continuing efforts to conceptualize referrals in multiple dimensions are anticipated to fully grasp complex phenomena underlying referrals.

Inclusion of Population-specific Reference Panel from India to the 1000 Genomes Phase 3 Panel Improves Imputation Accuracy.

Science.gov (United States)

Ahmad, Meraj; Sinha, Anubhav; Ghosh, Sreya; Kumar, Vikrant; Davila, Sonia; Yajnik, Chittaranjan S; Chandak, Giriraj R

2017-07-27

Imputation is a computational method based on the principle of haplotype sharing allowing enrichment of genome-wide association study datasets. It depends on the haplotype structure of the population and density of the genotype data. The 1000 Genomes Project led to the generation of imputation reference panels which have been used globally. However, recent studies have shown that population-specific panels provide better enrichment of genome-wide variants. We compared the imputation accuracy using 1000 Genomes phase 3 reference panel and a panel generated from genome-wide data on 407 individuals from Western India (WIP). The concordance of imputed variants was cross-checked with next-generation re-sequencing data on a subset of genomic regions. Further, using the genome-wide data from 1880 individuals, we demonstrate that WIP works better than the 1000 Genomes phase 3 panel and when merged with it, significantly improves the imputation accuracy throughout the minor allele frequency range. We also show that imputation using only South Asian component of the 1000 Genomes phase 3 panel works as good as the merged panel, making it computationally less intensive job. Thus, our study stresses that imputation accuracy using 1000 Genomes phase 3 panel can be further improved by including population-specific reference panels from South Asia.

Technical reference manual for TIME4. Version 1.0, Volume 1

International Nuclear Information System (INIS)

Wilmot, R.D.; Ringrose, P.S.; Larkin, J.P.A.; Kleissen, F.A.T.

1991-07-01

This document is the Technical Reference Manual for the TIME4 model. TIME4 is the environmental change model developed for use in the probabilistic risk analysis of deep disposal of radioactive waste. The Technical Reference Manual describes the theoretical background to the model. The modelling method is described, followed by a review of related work and a detailed description for each sub-model. (author)

OSH technical reference manual

Energy Technology Data Exchange (ETDEWEB)

1993-11-01

In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

Reference samples for the earth sciences

Science.gov (United States)

Flanagan, F.J.

1974-01-01

A revised list of reference samples of interest to geoscientists has been extended to include samples for the agronomist, the archaeologist and the environmentalist. In addition to the source from which standard samples may be obtained, references or pertinent notes for some samples are included. The number of rock reference samples is now almost adequate, and the variety of ore samples will soon be sufficient. There are very few samples for microprobe work. Oil shales will become more important because of the outlook for world petroleum resources. The dryland equivalent of a submarine basalt might be useful in studies of sea-floor spreading and of the geochemistry of basalts. The Na- and K-feldspars of BCS (British Chemical Standards-Bureau of Analysed Samples), NBS (National Bureau of Standards), and ANRT (Association Kationale de la Recherche Technique) could serve as trace-element standards if such data were available. Similarly, the present NBS flint and plastic clays, as well as their predecessors, might be useful for archaeological pottery studies. The International Decade for Ocean Exploration may stimulate the preparation of ocean-water standards for trace elements or pollutants and a standard for manganese nodules. ?? 1974.

Enhancement of human performance with developing ergonomic workplace environment and providing work-life balance

OpenAIRE

Tamas Forgacs,; Henrietta Finna

2010-01-01

Ergonomy aims at creating a work place that suits the employee’s needs. A well-developed office does not only increase work efficiency but it can also significantly reduce costs. This study researches and reveals the specific personal attributes and the factors of workplace environment, which have an effect on the efficiency of the workforce. We were searching for studies, where the core work wasn’t changed -the increase in work efficiency was reached only by changing the work environment.

Developing Potential New Reference Materials for Light Isotopes in Foodstuffs

Science.gov (United States)

Frew, Russell; Van Hale, Robert; Clarke, Dianne; Abrahim, Aiman; Resch, Christian; Mayr, Leopold; Cannavan, Andrew; Gröning, Manfred

2013-04-01

Measurements of subtle variations in stable isotope ratios provide the means for verifying food integrity in numerous ways. Adulterants usually have different isotopic composition so their presence in a food is readily detectable. Stable isotope measurements can also be used to determine the region of production of the food. In most cases the ability of stable isotope measurements to verify, or otherwise reject, the authenticity of the food is greatly enhanced by comparison of a result to a reference database. The more high-quality data in the database, the more statistical power is afforded by the comparison. A serious weakness at present is the lack of reference materials in food matrices available to the community. Thus researchers have to rely on in-house standards for calibration and quality assurance. The result is that there are numerous datasets published that may be internally consistent but it is exceedingly difficult to combine these datasets into a cohesive database. This is particularly important for measurements of the hydrogen isotopes. Here we present a survey of the stable isotope (^2H, ^13C and ^15N) composition of 12 Reference Materials from the International Atomic Energy Agency catalogue. All but one of these materials are plant matter and have been developed as reference materials for other applications such as radionuclide or trace element measurements. Thus they have been verified as suitable materials in terms of stability and homogeneity for those tests. The purpose of this work is to ascertain if they are similarly suitable as stable isotope reference materials. The results from our survey show that there is a wide range in elemental and isotopic composition among these materials. For example, the ^15N values range from-13.5‰ to +18.6‰ and the nitrogen elemental composition range is from 0.7% to 9.7%. The ^13C values range from -20‰ to -40‰ and the carbon elemental composition ranges from 15% to 47%. We are now in the process of

Patient dose measurement in common medical X-ray examinations and propose the first local dose reference levels to diagnostic radiology in Iran

Science.gov (United States)

Rasuli, Behrouz; Tabari Juybari, Raheleh; Forouzi, Meysam; Ghorbani, Mohammad

2017-09-01

Introduction: The main purpose of this study was to investigate patient dose in pelvic and abdomen x-ray examinations. This work also provided the LDRLs (local diagnostic reference levels) in Khuzestan region, southwest of Iran to help establish the NDRLs (national diagnostic reference levels). Methods: Patient doses were assessed from patient's anatomical data and exposure parameters based on the IAEA indirect dosimetry method. With regard to this method, exposure parameters such as tube output, kVp, mAs, FFD and patient anatomical data were used for calculating ESD (entrance skin dose) of patients. This study was conducted on 250 standard patients (50% men and 50% women) at eight high-patient-load imaging centers. Results: The results indicate that mean ESDs for the both pelvic and abdomen examinations were lower than the IAEA and EC reference levels, 2.3 and 3.7 mGy, respectively. Mean applied kVps were 67 and 70 and mean FFDs were 103 and 109, respectively. Tube loadings obtained in this study for pelvic examination were lower than all the corresponding values in the reviewed literature. Likewise, the average annual patient load across all hospitals were more than 37000 patients, i.e. more than 100 patients a day. Conclusions: The authors recommend that DRLs (diagnostic reference levels) obtained in this region, which are the first available data, can be used as local DRLs for pelvic and abdomen procedures. This work also provides that on-the-job training programs for staffs and close cross collaboration between physicists and physicians should be strongly considered.

Acute myeloid leukemia and background radiation in an expanded case-referent study

International Nuclear Information System (INIS)

Flodin, U.; Fredriksson, M.; Persson, B.; Axelson, O.

1990-01-01

A case-referent study that investigated possible associations between environmental and occupational exposures and acute myeloid leukemia was performed on 86 cases and 172 referents, all of whom were living. Exposure information was obtained through a questionnaire mailed to each subject. An association was found between time spent in concrete buildings at home and work and leukemia morbidity. In addition, extensive x-ray examinations that occurred more than 5 y prior to diagnosis were more common among cases than referents

A Fiducial Reference Stie for Satellite Altimetry in Crete, Greece

Science.gov (United States)

Mertikas, Stelios; Donlon, Craig; Mavrocordatos, Constantin; Bojkov, Bojan; Femenias, Pierre; Parrinello, Tommaso; Picot, Nicolas; Desjonqueres, Jean-Damien; Andersen, Ole Baltazar

2016-08-01

With the advent of diverse satellite altimeters and variant measuring techniques, it has become mature in the scientific community, that an absolute reference Cal/Val site is regularly maintained to define, monitor, control the responses of any altimetric system.This work sets the ground for the establishment of a Fiducial Reference Site for ESA satellite altimetry in Gavdos and West Crete, Greece. It will consistently and reliably determine (a) absolute altimeter biases and their drifts; (b) relative bias among diverse missions; but also (c) continuously and independently connect different missions, on a common and reliable reference and also to SI-traceable measurements. Results from this fiducial reference site will be based on historic Cal/Val site measurement records, and will be the yardstick for building up capacity for monitoring climate change. This will be achieved by defining and assessing any satellite altimeter measurements to known, controlled and absolute reference signals with different techniques, processes and instrumentation.

A set of 4D pediatric XCAT reference phantoms for multimodality research

International Nuclear Information System (INIS)

Norris, Hannah; Zhang, Yakun; Bond, Jason; Sturgeon, Gregory M.; Samei, E.; Segars, W. P.; Minhas, Anum; Frush, D.; Tward, Daniel J.; Ratnanather, J. T.; Miller, M. I.

2014-01-01

Purpose: The authors previously developed an adult population of 4D extended cardiac-torso (XCAT) phantoms for multimodality imaging research. In this work, the authors develop a reference set of 4D pediatric XCAT phantoms consisting of male and female anatomies at ages of newborn, 1, 5, 10, and 15 years. These models will serve as the foundation from which the authors will create a vast population of pediatric phantoms for optimizing pediatric CT imaging protocols. Methods: Each phantom was based on a unique set of CT data from a normal patient obtained from the Duke University database. The datasets were selected to best match the reference values for height and weight for the different ages and genders according to ICRP Publication 89. The major organs and structures were segmented from the CT data and used to create an initial pediatric model defined using nonuniform rational B-spline surfaces. The CT data covered the entire torso and part of the head. To complete the body, the authors manually added on the top of the head and the arms and legs using scaled versions of the XCAT adult models or additional models created from cadaver data. A multichannel large deformation diffeomorphic metric mapping algorithm was then used to calculate the transform from a template XCAT phantom (male or female 50th percentile adult) to the target pediatric model. The transform was applied to the template XCAT to fill in any unsegmented structures within the target phantom and to implement the 4D cardiac and respiratory models in the new anatomy. The masses of the organs in each phantom were matched to the reference values given in ICRP Publication 89. The new reference models were checked for anatomical accuracy via visual inspection. Results: The authors created a set of ten pediatric reference phantoms that have the same level of detail and functionality as the original XCAT phantom adults. Each consists of thousands of anatomical structures and includes parameterized models

A set of 4D pediatric XCAT reference phantoms for multimodality research

Energy Technology Data Exchange (ETDEWEB)

Norris, Hannah, E-mail: Hannah.norris@duke.edu; Zhang, Yakun; Bond, Jason; Sturgeon, Gregory M.; Samei, E.; Segars, W. P. [Carl E. Ravin Advanced Imaging Laboratories, Department of Radiology, Duke University Medical Center, Durham, North Carolina 27705 (United States); Minhas, Anum; Frush, D. [Department of Radiology, Duke University Medical Center, Durham, North Carolina 27710 (United States); Tward, Daniel J.; Ratnanather, J. T.; Miller, M. I. [Center for Imaging Science, Johns Hopkins University, Baltimore, Maryland 21218 (United States)

2014-03-15

Purpose: The authors previously developed an adult population of 4D extended cardiac-torso (XCAT) phantoms for multimodality imaging research. In this work, the authors develop a reference set of 4D pediatric XCAT phantoms consisting of male and female anatomies at ages of newborn, 1, 5, 10, and 15 years. These models will serve as the foundation from which the authors will create a vast population of pediatric phantoms for optimizing pediatric CT imaging protocols. Methods: Each phantom was based on a unique set of CT data from a normal patient obtained from the Duke University database. The datasets were selected to best match the reference values for height and weight for the different ages and genders according to ICRP Publication 89. The major organs and structures were segmented from the CT data and used to create an initial pediatric model defined using nonuniform rational B-spline surfaces. The CT data covered the entire torso and part of the head. To complete the body, the authors manually added on the top of the head and the arms and legs using scaled versions of the XCAT adult models or additional models created from cadaver data. A multichannel large deformation diffeomorphic metric mapping algorithm was then used to calculate the transform from a template XCAT phantom (male or female 50th percentile adult) to the target pediatric model. The transform was applied to the template XCAT to fill in any unsegmented structures within the target phantom and to implement the 4D cardiac and respiratory models in the new anatomy. The masses of the organs in each phantom were matched to the reference values given in ICRP Publication 89. The new reference models were checked for anatomical accuracy via visual inspection. Results: The authors created a set of ten pediatric reference phantoms that have the same level of detail and functionality as the original XCAT phantom adults. Each consists of thousands of anatomical structures and includes parameterized models

Modcomp MAX IV System Processors reference guide

Energy Technology Data Exchange (ETDEWEB)

Cummings, J.

1990-10-01

A user almost always faces a big problem when having to learn to use a new computer system. The information necessary to use the system is often scattered throughout many different manuals. The user also faces the problem of extracting the information really needed from each manual. Very few computer vendors supply a single Users Guide or even a manual to help the new user locate the necessary manuals. Modcomp is no exception to this, Modcomp MAX IV requires that the user be familiar with the system file usage which adds to the problem. At General Atomics there is an ever increasing need for new users to learn how to use the Modcomp computers. This paper was written to provide a condensed Users Reference Guide'' for Modcomp computer users. This manual should be of value not only to new users but any users that are not Modcomp computer systems experts. This Users Reference Guide'' is intended to provided the basic information for the use of the various Modcomp System Processors necessary to, create, compile, link-edit, and catalog a program. Only the information necessary to provide the user with a basic understanding of the Systems Processors is included. This document provides enough information for the majority of programmers to use the Modcomp computers without having to refer to any other manuals. A lot of emphasis has been placed on the file description and usage for each of the System Processors. This allows the user to understand how Modcomp MAX IV does things rather than just learning the system commands.

CONCEPTS IN HUMAN NUTRITION AND ANIMAL FEEDING New Reference Values for nutrient intake in Germany, Austria and Switzerland (DACH-reference values

Directory of Open Access Journals (Sweden)

Wolfram Günther

2001-01-01

Full Text Available In accordance to their very good collaboration through decades especially at the “3 Countries Meetings” the Nutrition Societies of Germany, Austria and Switzerland (D, A, CH decided to prepare new Reference Values for nutrient intake as a joint edition in the year 2000. The Reference Values consist of two parts: Part 1, Nutritive aspects of nutrients. Part 2, Preventive aspect of nutrient and food components. The Reference Values presented should protect almost all individuals of the respective group against potential damage to health from their diet and provide a basis for full functional capacity. In detail recommendations, estimates or guideline values are presented for the different nutrients. Total fat should not exceed 30% of energy, saturated fatty acids should not provide more than 10% of energy and polyunsaturated fatty acids 7% of energy with n-6 and n-3 fatty acids in a ratio of 5:1. Preventive aspect concern the prophylaxis of nutrition-related diseases.

Work-related critical incidents in hospital-based health care providers and the risk of post-traumatic stress symptoms, anxiety, and depression: a meta-analysis.

Science.gov (United States)

de Boer, Jacoba; Lok, Anja; Van't Verlaat, Ellen; Duivenvoorden, Hugo J; Bakker, Arnold B; Smit, Bert J

2011-07-01

This meta-analysis reviewed existing data on the impact of work-related critical incidents in hospital-based health care professionals. Work-related critical incidents may induce post-traumatic stress symptoms or even post-traumatic stress disorder (PTSD), anxiety, and depression and may negatively affect health care practitioners' behaviors toward patients. Nurses and doctors often cope by working part time or switching jobs. Hospital administrators and health care practitioners themselves may underestimate the effects of work-related critical incidents. Relevant online databases were searched for original research published from inception to 2009 and manual searches of the Journal of Traumatic Stress, reference lists, and the European Traumatic Stress Research Database were conducted. Two researchers independently decided on inclusion and study quality. Effect sizes were estimated using standardized mean differences with 95% confidence intervals. Consistency was evaluated, using the I(2)-statistic. Meta-analysis was performed using the random effects model. Eleven studies, which included 3866 participants, evaluated the relationship between work-related critical incidents and post-traumatic stress symptoms. Six of these studies, which included 1695 participants, also reported on the relationship between work-related critical incidents and symptoms of anxiety and depression. Heterogeneity among studies was high and could not be accounted for by study quality, character of the incident, or timing of data collection. Pooled effect sizes for the impact of work-related critical incidents on post-traumatic stress symptoms, anxiety, and depression were small to medium. Remarkably, the effect was more pronounced in the longer than in the shorter term. In conclusion, this meta-analysis supports the hypothesis that work-related critical incidents are positively related to post-traumatic stress symptoms, anxiety, and depression in hospital-based health care professionals

Selection of reference genes for qPCR in hairy root cultures of peanut

Directory of Open Access Journals (Sweden)

Medrano Giuliana

2011-10-01

Full Text Available Abstract Background Hairy root cultures produced via Agrobacterium rhizogenes-mediated transformation have emerged as practical biological models to elucidate the biosynthesis of specialized metabolites. To effectively understand the expression patterns of the genes involved in the metabolic pathways of these compounds, reference genes need to be systematically validated under specific experimental conditions as established by the MIQE (Minimum Information for Publication of Quantitative Real-Time PCR Experiments guidelines. In the present report we describe the first validation of reference genes for RT-qPCR in hairy root cultures of peanut which produce stilbenoids upon elicitor treatments. Results A total of 21 candidate reference genes were evaluated. Nineteen genes were selected based on previous qPCR studies in plants and two were from the T-DNAs transferred from A. rhizogenes. Nucleotide sequences of peanut candidate genes were obtained using their homologous sequences in Arabidopsis. To identify the suitable primers, calibration curves were obtained for each candidate reference gene. After data analysis, 12 candidate genes meeting standard efficiency criteria were selected. The expression stability of these genes was analyzed using geNorm and NormFinder algorithms and a ranking was established based on expression stability of the genes. Candidate reference gene expression was shown to have less variation in methyl jasmonate (MeJA treated root cultures than those treated with sodium acetate (NaOAc. Conclusions This work constitutes the first effort to validate reference genes for RT-qPCR in hairy roots. While these genes were selected under conditions of NaOAc and MeJA treatment, we anticipate these genes to provide good targets for reference genes for hairy roots under a variety of stress conditions. The lead reference genes were a gene encoding for a TATA box binding protein (TBP2 and a gene encoding a ribosomal protein (RPL8C. A

Mercury's Reference Frames After the MESSENGER Mission

Science.gov (United States)

Stark, A.; Oberst, J.; Preusker, F.; Burmeister, S.; Steinbrügge, G.; Hussmann, H.

2018-05-01

We provide an overview of Mercury's reference frames based on MESSENGER observations. We discuss the dynamical, the principal-axes, the ellipsoid, as well as the cartographic frame, which was adopted for MESSENGER data products.

Evaluation of the Thermophysical Properties of Poly(MethylMethacrylate): A Reference Material for the Development of a flammability Test for Micro-Gravity Environments

OpenAIRE

Steinhaus, Thomas

1999-01-01

A study has been conducted using PMMA (Poly(methyl methacrylate)) as a reference material in the development process of the Forced Flow and flame Spread Test (FIST). This test attempts to establish different criteria for material flammability for micro-gravity environments. The FIST consists of two tests, ignition and flame spread tests, that provide a series of material “fire” properties that jointly provide important information on the flammability of a material. This work de...

Goethe-Institut Lehrerhandbibliothek: A Bibliography of Texts and Reference Works for the Teacher of German.

Science.gov (United States)

Goethe Inst., Munich (West Germany).

Teachers of German will find 120 items dating from 1960 entered in this alphabetized and annotated bibliography of texts and references. Language entries include material on: (1) grammar, (2) vocabulary, (3) pronunciation, (4) writing and style, (5) syntax, (6) morphology, (7) etymology, (8) dictation, (9) translation exercises, (10) verbs, (11)…

Generating Ground Reference Data for a Global Impervious Surface Survey

Science.gov (United States)

Tilton, James C.; deColstoun, Eric Brown; Wolfe, Robert E.; Tan, Bin; Huang, Chengquan

2012-01-01

We are engaged in a project to produce a 30m impervious cover data set of the entire Earth for the years 2000 and 2010 based on the Landsat Global Land Survey (GLS) data set. The GLS data from Landsat provide an unprecedented opportunity to map global urbanization at this resolution for the first time, with unprecedented detail and accuracy. Moreover, the spatial resolution of Landsat is absolutely essential to accurately resolve urban targets such as buildings, roads and parking lots. Finally, with GLS data available for the 1975, 1990, 2000, and 2005 time periods, and soon for the 2010 period, the land cover/use changes due to urbanization can now be quantified at this spatial scale as well. Our approach works across spatial scales using very high spatial resolution commercial satellite data to both produce and evaluate continental scale products at the 30m spatial resolution of Landsat data. We are developing continental scale training data at 1m or so resolution and aggregating these to 30m for training a regression tree algorithm. Because the quality of the input training data are critical, we have developed an interactive software tool, called HSegLearn, to facilitate the photo-interpretation of high resolution imagery data, such as Quickbird or Ikonos data, into an impervious versus non-impervious map. Previous work has shown that photo-interpretation of high resolution data at 1 meter resolution will generate an accurate 30m resolution ground reference when coarsened to that resolution. Since this process can be very time consuming when using standard clustering classification algorithms, we are looking at image segmentation as a potential avenue to not only improve the training process but also provide a semi-automated approach for generating the ground reference data. HSegLearn takes as its input a hierarchical set of image segmentations produced by the HSeg image segmentation program [1, 2]. HSegLearn lets an analyst specify pixel locations as being

Flow at work : A self-determination perspective

NARCIS (Netherlands)

Bakker, A.B.; van Woerkom, M.

2017-01-01

Flow at work refers to a short-term peak experience that is characterized by absorption, work enjoyment, and intrinsic work motivation, and is positively related to various indicators of job performance. In an organizational context, research has predominantly focused on situational predictors of

A structural SVM approach for reference parsing.

Science.gov (United States)

Zhang, Xiaoli; Zou, Jie; Le, Daniel X; Thoma, George R

2011-06-09

Automated extraction of bibliographic data, such as article titles, author names, abstracts, and references is essential to the affordable creation of large citation databases. References, typically appearing at the end of journal articles, can also provide valuable information for extracting other bibliographic data. Therefore, parsing individual reference to extract author, title, journal, year, etc. is sometimes a necessary preprocessing step in building citation-indexing systems. The regular structure in references enables us to consider reference parsing a sequence learning problem and to study structural Support Vector Machine (structural SVM), a newly developed structured learning algorithm on parsing references. In this study, we implemented structural SVM and used two types of contextual features to compare structural SVM with conventional SVM. Both methods achieve above 98% token classification accuracy and above 95% overall chunk-level accuracy for reference parsing. We also compared SVM and structural SVM to Conditional Random Field (CRF). The experimental results show that structural SVM and CRF achieve similar accuracies at token- and chunk-levels. When only basic observation features are used for each token, structural SVM achieves higher performance compared to SVM since it utilizes the contextual label features. However, when the contextual observation features from neighboring tokens are combined, SVM performance improves greatly, and is close to that of structural SVM after adding the second order contextual observation features. The comparison of these two methods with CRF using the same set of binary features show that both structural SVM and CRF perform better than SVM, indicating their stronger sequence learning ability in reference parsing.

Connecting VLBI and Gaia celestial reference frames

Directory of Open Access Journals (Sweden)

Zinovy Malkin

2016-09-01

Full Text Available The current state of the link problem between radio and optical celestial reference frames is considered.The main objectives of the investigations in this direction during the next few years are the preparation of a comparisonand the mutual orientation and rotation between the optical it Gaia Celestial Reference Frame (GCRFand the 3rd generation radio International Celestial Reference Frame (ICRF3, obtained from VLBI observations.Both systems, ideally, should be a realization of the ICRS (International Celestial Reference System at micro-arcsecond level accuracy.Therefore, the link accuracy between the ICRF and GCRF should be obtained with similar error level, which is not a trivial taskdue to relatively large systematic and random errors in source positions at different frequency bands.In this paper, a brief overview of recent work on the GCRF--ICRF link is presented.Additional possibilities to improve the GCRF--ICRF link accuracy are discussed.The suggestion is made to use astrometric radio sources with optical magnitude to 20$^m$ rather than to 18$^m$ as currently plannedfor the GCRF--ICRF link.In addition, the use of radio stars is also a prospective method to obtain independent and accurate orientation between the Gaia frame and the ICRF.

Connecting VLBI and Gaia Celestial Reference Frames

Energy Technology Data Exchange (ETDEWEB)

Malkin, Zinovy, E-mail: malkin@gao.spb.ru [Department of Radio Astronomy Research, The Pulkovo Astronomical Observatory, St. Petersburg (Russian Federation); Institute of Earth Sciences, St. Petersburg State University, St. Petersburg (Russian Federation); Astronomy and Cosmic Geodesy Department, Kazan Federal University, Kazan (Russian Federation)

2016-09-12

The current state of the link problem between radio and optical celestial reference frames is considered. The main objectives of the investigations in this direction during the next few years are the preparation of a comparison and the mutual orientation and rotation between the optical Gaia Celestial Reference Frame (GCRF) and the 3rd generation radio International Celestial Reference Frame (ICRF3), obtained from VLBI observations. Both systems, ideally, should be a realization of the ICRS (International Celestial Reference System) at micro-arcsecond level accuracy. Therefore, the link accuracy between the ICRF and GCRF should be obtained with similar error level, which is not a trivial task due to relatively large systematic and random errors in source positions at different frequency bands. In this paper, a brief overview of recent work on the GCRF–ICRF link is presented. Additional possibilities to improve the GCRF–ICRF link accuracy are discussed. The suggestion is made to use astrometric radio sources with optical magnitude to 20{sup m} rather than to 18{sup m} as currently planned for the GCRF–ICRF link. In addition, the use of radio stars is also a prospective method to obtain independent and accurate orientation between the Gaia frame and the ICRF.

Accuracy assessment of NOAA's daily reference evapotranspiration maps for the Texas High Plains

Science.gov (United States)

The National Oceanic and Atmospheric Administration (NOAA) provides daily reference ET for the continental U.S. using climatic data from North American Land Data Assimilation System (NLDAS). This data provides large scale spatial representation for reference ET, which is essential for regional scal...

Space-time reference with an optical link

International Nuclear Information System (INIS)

Berceau, P; Hollberg, L; Taylor, M; Kahn, J

2016-01-01

We describe a concept for realizing a high performance space-time reference using a stable atomic clock in a precisely defined orbit and synchronizing the orbiting clock to high-accuracy atomic clocks on the ground. The synchronization would be accomplished using a two-way lasercom link between ground and space. The basic approach is to take advantage of the highest-performance cold-atom atomic clocks at national standards laboratories on the ground and to transfer that performance to an orbiting clock that has good stability and that serves as a ‘frequency-flywheel’ over time-scales of a few hours. The two-way lasercom link would also provide precise range information and thus precise orbit determination. With a well-defined orbit and a synchronized clock, the satellite could serve as a high-accuracy space-time reference, providing precise time worldwide, a valuable reference frame for geodesy, and independent high-accuracy measurements of GNSS clocks. Under reasonable assumptions, a practical system would be able to deliver picosecond timing worldwide and millimeter orbit determination, and could serve as an enabling subsystem for other proposed space-gravity missions, which are briefly reviewed. (paper)

Remote transfer of ultrastable frequency references via fiber networks

International Nuclear Information System (INIS)

Foreman, Seth M.; Holman, Kevin W.; Hudson, Darren D.; Jones, David J.; Ye, Jun

2007-01-01

Three distinct techniques exist for distributing an ultrastable frequency reference over optical fibers. For the distribution of a microwave frequency reference, an amplitude-modulated continuous wave (cw) laser can be used. Over kilometer-scale lengths this approach provides an instability at 1 s of ∼3x10 -14 without stabilization of the fiber-induced noise and ∼1x10 -14 with active noise cancellation. An optical frequency reference can be transferred by directly transmitting a stabilized cw laser over fiber and then disseminated to other optical and microwave regions using an optical frequency comb. This provides an instability at 1 s of 2x10 -14 without active noise cancellation and 3x10 -15 with active noise cancellation [Recent results reduce the instability at 1 s to 6x10 -18 .] Finally, microwave and optical frequency references can be simultaneously transmitted using an optical frequency comb, and we expect the optical transfer to be similar in performance to the cw optical frequency transfer. The instability at 1 s for transfer of a microwave frequency reference with the comb is ∼3x10 -14 without active noise cancellation and -15 with active stabilization. The comb can also distribute a microwave frequency reference with root-mean-square timing jitter below 16 fs integrated over the Nyquist bandwidth of the pulse train (∼50 MHz) when high-bandwidth active noise cancellation is employed, which is important for remote synchronization applications

Determination of carbon-14 in environmental level, solid reference materials

Energy Technology Data Exchange (ETDEWEB)

Blowers, Paul, E-mail: paul.blowers@cefas.co.uk [Cefas Lowestoft Laboratory, Pakefield Road, Lowestoft, Suffolk, NR33 0HT (United Kingdom); Caborn, Jane, E-mail: jane.a.caborn@nnl.co.uk [NNL, Springfields, Salwick, Preston, Lancashire, PR4 0XJ (United Kingdom); Dell, Tony [Veterinary Laboratories Agency, New Haw, Addlestone, Surrey, KT15 3NB (United Kingdom); Gingell, Terry [DSTL, Radiation Protection Services, Crescent Road, Alverstoke, Gosport, Hants, PO12 2DL (United Kingdom); Harms, Arvic [National Physical Laboratory, Hampton Road, Teddington, Middlesex, TW11 0LW (United Kingdom); Long, Stephanie [Radiological Protection Institute of Ireland, 3 Clonskeagh Square, Clonskeagh Road, Dublin 14, Ireland (United Kingdom); Sleep, Darren [Centre for Ecology and Hydrology, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster, LA1 4AP (United Kingdom); Stewart, Charlie [UKAEA (Waste Management Group), Chemical Support Services, D1310/14, Dounreay, Thurso, Caithness, KW14 7TZ (United Kingdom); Walker, Jill [Radiocarbon Dating, The Old Stables, East Lockinge, Wantage, Oxon OX12 8QY (United Kingdom); Warwick, Phil E. [GAU-Radioanalytical, National Oceanography Centre Southampton, European Way, Southampton, SO14 3ZH (United Kingdom)

2011-10-15

An intercomparison exercise to determine the {sup 14}C activity concentrations in a range of solid, environmental level materials was conducted between laboratories in the UK. IAEA reference materials, C2, C6 and C7, and an in-house laboratory QA material were dispatched in 2006 to ten laboratories comprising of members of the Analyst Informal Working Group (AIWG) and one other invited party. The laboratories performed the determinations using a number of techniques, and using the results each one was evaluated in terms of levels of precision, sensitivity and limits of detection. The results of the study show that all techniques are capable of successfully analysing {sup 14}C in environmental level materials, however, a shortage of certified environmental reference materials exists. The suitability of the IAEA reference materials and other material for use as reference materials was also assessed.

Determination of carbon-14 in environmental level, solid reference materials

International Nuclear Information System (INIS)

Blowers, Paul; Caborn, Jane; Dell, Tony; Gingell, Terry; Harms, Arvic; Long, Stephanie; Sleep, Darren; Stewart, Charlie; Walker, Jill; Warwick, Phil E.

2011-01-01

An intercomparison exercise to determine the 14 C activity concentrations in a range of solid, environmental level materials was conducted between laboratories in the UK. IAEA reference materials, C2, C6 and C7, and an in-house laboratory QA material were dispatched in 2006 to ten laboratories comprising of members of the Analyst Informal Working Group (AIWG) and one other invited party. The laboratories performed the determinations using a number of techniques, and using the results each one was evaluated in terms of levels of precision, sensitivity and limits of detection. The results of the study show that all techniques are capable of successfully analysing 14 C in environmental level materials, however, a shortage of certified environmental reference materials exists. The suitability of the IAEA reference materials and other material for use as reference materials was also assessed.

DEVELOPMENT OF THE REFERENCE MATERIALS PRODUCTION BRANCH IN THE JOINT STOCK COMPANY "THE GULIDOV KRASNOYARSK NON-FERROUS METALS PLANT"

Directory of Open Access Journals (Sweden)

K. A. Shatnykh

2015-01-01

Full Text Available The article deals with the development of the branch for the reference materials production in the Joint Stock Company "The Gulidov Krasnoyarsk Non-Ferrous Metals Plant" (JSC "Krastsvetmet". Here the most important workings for reference materials including the work for the London precious metal exchange, current and future works are stated.

The overall situation of female street children (11-18 years) engaged in commercial sex work in Dire Dawa - Ethiopia : survey in case study with special reference to child prostitution

OpenAIRE

Mekuria, Melkem Lengereh

2004-01-01

THE OVERALL SITUATION OF FEMALE STREET CHILDREN (11 18 YEARS) ENGAGED IN COMMERCIAL SEX WORK IN DIRE DAWA - ETHIOPIA (SURVEY IN CASE STUDY WITH SPECIAL REFERENCE TO CHILD PROSTITUTION) By MELKAM LENGEREH MEKURIA 2004 A THESIS SUBMITTED IN PARTIAL FULFILMENT OF THE REQUIREMENTS FOR THE MASTER OF PHILOSOPHY IN SPECIAL NEEDS EDUCATION UNIVERSITY OF OSLO FACULTY OF EDUCATION DEPARTMENT OF SPECIAL NEEDS EDUCATION ABSTRACT Prostitution in gene...

Micro-homogeneity evaluation of a bovine kidney candidate reference material

Energy Technology Data Exchange (ETDEWEB)

Castro, Liliana; Moreira, Edson G.; Vasconcellos, Marina B.A., E-mail: lcastroesnal@usp.br [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil)

2017-07-01

The minimum sample intake for which a reference material remains homogeneous is one of the parameters that must be estimated in the homogeneity assessment study of reference materials. In this work, Instrumental Neutron Activation Analysis was used to evaluate this quantity in a bovine kidney candidate reference material. The mass fractions of 9 inorganic constituents were determined in subsamples between 1 and 2 mg in order to estimate the relative homogeneity factor (HE) and the minimum sample mass to achieve 5% and 10% precision on a 95% confidence level. Results obtained for H{sub E} in all the analyzed elements were satisfactory. The estimated minimum sample intake was between 2 mg and 40 mg, depending on the element. (author)

Refer-To-Pharmacy: Pharmacy for the Next Generation Now! A Short Communication for Pharmacy

OpenAIRE

Gray, Alistair

2015-01-01

Refer-to-Pharmacy is the first fully integrated hospital to community pharmacy referral system. This article explains the importance of these referrals for patients and health economies to improve medicines optimisation, and how Refer-to-Pharmacy works in both hospital and community pharmacies.

Korean anatomical reference data for adults for use in radiological protection

Science.gov (United States)

Choi, Chansoo; Yeom, Yeon Soo; Nguyen, Thang Tat; Lee, Hanjin; Han, Haegin; Shin, Bangho; Zhang, Xujia; Kim, Chan Hyeong; Chung, Beom Sun

2018-01-01

For radiological protection from exposure to ionizing radiation, in which a population-averaged dose evaluation is used, establishing a system of reference anatomical and physiological data for a specific population of interest is important. Some studies were done in the past to establish Korean reference data; however, the data provided the mass values only for a limited number of organs/tissues. In addition, the standing height and total body mass are based on 20-year-old data. In the present study, a new set of Korean reference anatomical values was established for use in the radiological protection of Korean workers and members of the public. The established Korean reference data provide the masses of 58 organs/tissues, including those needed to calculate the effective dose, which were derived by collecting and analyzing various scientific reports in the literature and data. In addition, the data provide not only standing height and total body mass, but also 131 additional anthropometric parameters; these values were derived from the most recent Korean national survey project, 7 th Size Korea. The characteristics of the data were also compared with several other population data, including the Asian and the International Commission on Radiological Protection (ICRP) reference data.

CONFLICT BETWEEN WORK AND LIFE AND ITS EFFECT ON WORK CULTURE

OpenAIRE

P. SHYAMALA

2012-01-01

ABSTRACT: In the present scenario, women have more responsibility since they are maintaining a balance between work and life. With particular reference to women lecturers they have a feeling that sometime their life is balanced and in other instances it is unbalanced. Since women lecturers are playing dual roles especially the personal and professional roles it is very difficult to maintain a balanced life. In the working environment women lecturers have to effectively manage the problems and...

Errors in the SAP reference model

NARCIS (Netherlands)

Mendling, J.; Aalst, van der W.M.P.; Dongen, van B.F.; Verbeek, H.M.W.

2006-01-01

The SAP Reference Model is a set of information models that is utilized to guide the configuration of SAP systems. A big part of these models are business process models represented in the Eventdriven Process Chains (EPC) notation. These EPC models provide a easy to comprehend overview of SAP

A Reference Architecture for Space Information Management

Science.gov (United States)

Mattmann, Chris A.; Crichton, Daniel J.; Hughes, J. Steven; Ramirez, Paul M.; Berrios, Daniel C.

2006-01-01

We describe a reference architecture for space information management systems that elegantly overcomes the rigid design of common information systems in many domains. The reference architecture consists of a set of flexible, reusable, independent models and software components that function in unison, but remain separately managed entities. The main guiding principle of the reference architecture is to separate the various models of information (e.g., data, metadata, etc.) from implemented system code, allowing each to evolve independently. System modularity, systems interoperability, and dynamic evolution of information system components are the primary benefits of the design of the architecture. The architecture requires the use of information models that are substantially more advanced than those used by the vast majority of information systems. These models are more expressive and can be more easily modularized, distributed and maintained than simpler models e.g., configuration files and data dictionaries. Our current work focuses on formalizing the architecture within a CCSDS Green Book and evaluating the architecture within the context of the C3I initiative.

Partnership working and improved service delivery: views of staff providing sexual health services.

Science.gov (United States)

Pow, Janette; Elliott, Lawrie; Raeside, Robert; Themessl-Huber, Markus; Claveirole, Anne

2013-07-01

Successful partnership working has theoretically been linked to improvements in service delivery and is dependent on the strength of the partnership, trust, communication, professional roles and resource sharing. Empirical evidence to confirm the relationships between these factors and improved service provision, however, is lacking. Our aim was to assess the views of staff as to the conditions required for partnership working. This study was a cross-sectional survey of 687 staff offering sexual health education, information or support to young people in the Healthy Respect intervention area in Scotland. Views of each variable were scored and structural equation modelling was used to assess the theoretical model. Responses were received from 284 (41%) staff. Greater strength of partnership was directly associated with increasing the number of referrals. Establishing professional roles between organizations was also associated with increasing the number of referrals. Strength of partnership was indirectly associated with working more effectively with young people and this relationship depended on clear communication, trust, established professional roles and shared resources. Effective partnership working depends on a number of interdependent relationships between organizations, which act synergistically to improve organizational outcomes. Effective partnership working leads to improved service delivery though there is a need for better controlled studies which demonstrate the effect on health outcomes.

Exploring Working Relationships in Mental Health Care via an E-Recovery Portal: Qualitative Study on the Experiences of Service Users and Health Providers.

Science.gov (United States)

Strand, Monica; Gammon, Deede; Eng, Lillian Sofie; Ruland, Cornelia

2017-11-14

The quality of working relationships between service users and health providers is fundamental in the processes of recovery in mental health. How Internet-based interventions will influence these relationships for persons with long-term care needs, and the measures that can be taken to maintain and enhance working relationships through Internet, is still not well understood. The aim of this study was to gain insights into how service users and health providers experience their working relationships when they are offered the option of supplementing ongoing collaboration with an e-recovery portal. In this exploratory and descriptive study, an e-recovery portal was used by service users and their health providers in 2 mental health communities in Norway for at least 6 months and at most 12 months (2015-2016). The portal consists of secure messaging, a peer support forum, and a toolbox of resources for working with life domains including status, goals and activities, network map, crisis plan, and exercises. The portal was owned and managed by the service user while health providers could remotely access parts of the service user-generated content. The participants could use the portal in whatever way they wished, to suit their collaboration. Data from 6 focus groups, 17 individual interviews, and an interview with 1 dyad about their experiences of use of the portal over the study period were inductively coded and thematically analyzed. The thematic analysis resulted in 2 main themes: (1) new relational avenues and (2) out of alignment, illustrated by 8 subthemes. The first main theme is about dyads who reported new and enriching ways of working together through the portal, particularly related to written communication and use of the goal module. Illustrative subthemes are ownership, common ground, goals and direction, and sense of presence and availability. The second main theme illuminates the difficulties that arose when service users' and health providers

Perturbation theory for water with an associating reference fluid

Science.gov (United States)

Marshall, Bennett D.

2017-11-01

The theoretical description of the thermodynamics of water is challenged by the structural transition towards tetrahedral symmetry at ambient conditions. As perturbation theories typically assume a spherically symmetric reference fluid, they are incapable of accurately describing the liquid properties of water at ambient conditions. In this paper we address this problem by introducing the concept of an associated reference perturbation theory (APT). In APT we treat the reference fluid as an associating hard sphere fluid which transitions to tetrahedral symmetry in the fully hydrogen bonded limit. We calculate this transition in a theoretically self-consistent manner without appealing to molecular simulations. This associated reference provides the reference fluid for a second order Barker-Henderson perturbative treatment of the long-range attractions. We demonstrate that this approach gives a significantly improved description of water as compared to standard perturbation theories.

Behind the Appearance of Reference Services at the Library University

Directory of Open Access Journals (Sweden)

Lailatur Rahmi

2016-12-01

Full Text Available This study aims to describe the development of reference services at the Library of Universitas Indonesia. The research discussed about innovation in the development of new activities in the reference services. Analyzing reference services from librarians’ point of view concerning the new activities in reference services, including attitudes and policies toward activities. This research takes a descriptive qualitative approach and uses semiotic analysis refering to Semiology of Roland Bathes concerning significance from two stage,  denotation and connotation, for analyzing the result of interviews. The results showed that the Universitas Indonesia Library reference service provides some new activities. Librarians become more active, revealed to be closer  to users, and transformation of information technology is seen as one of the competitive need to accompany the development of knowledge. Transfer media eventually have implications not on technology but rather to communication of reference services in the Universitas Indonesia Library.

Behind the Appearance of Reference Services at the Library University

Directory of Open Access Journals (Sweden)

Lailatur Rahmi

2018-01-01

Full Text Available This study aims to describe the development of reference services at the Library of Universitas Indonesia. The research discussed about innovation in the development of new activities in the reference services. Analyzing reference services from librarians’ point of view concerning the new activities in reference services, including attitudes and policies toward activities. This research takes a descriptive qualitative approach and uses semiotic analysis refering to Semiology of Roland Bathes concerning significance from two stage,  denotation and connotation, for analyzing the result of interviews. The results showed that the Universitas Indonesia Library reference service provides some new activities. Librarians become more active, revealed to be closer  to users, and transformation of information technology is seen as one of the competitive need to accompany the development of knowledge. Transfer media eventually have implications not on technology but rather to communication of reference services in the Universitas Indonesia Library.

Registration document 2005; Document de reference 2005

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This reference document of Gaz de France provides information and data on the Group activities in 2005: financial informations, business, activities, equipments factories and real estate, trade, capital, organization charts, employment, contracts and research programs. (A.L.B.)

Team social cohesion, professionalism, and patient-centeredness: Gendered care work, with special reference to elderly care - a mixed methods study.

Science.gov (United States)

Öhman, Ann; Keisu, Britt-Inger; Enberg, Birgit

2017-06-02

Healthcare organisations are facing large demands in recruiting employees with adequate competency to care for the increasing numbers of elderly. High degrees of turnover and dissatisfaction with working conditions are common. The gendered notion of care work as 'women's work', in combination with low salaries and status, may contribute to negative work experiences. There is abundant information about the negative aspects of elderly care health services, but little is known about positive aspects of this work. The study aim was to investigate work satisfaction from a gender perspective among Swedish registered nurses, physiotherapists, and occupational therapists, focusing specifically on healthcare services for the elderly. A mixed methods approach was adopted in which we combined statistics and open-ended responses from a national survey with qualitative research interviews with healthcare professionals in elderly care organisations. The survey was administered to a random sample of 1578 registered nurses, physiotherapists, and occupational therapists. Qualitative interviews with 17 professionals were conducted in six elderly care facilities. Qualitative and quantitative content analyses, chi 2 and constructivist grounded theory were used to analyse the data. There was a statistically significant difference in overall work satisfaction between those who worked in elderly care and those who did not (64 and 74,4% respectively, p Team social cohesion', 'Career development and autonomy', 'Client-centeredness', and 'Invisible and ignored power structures'. The results show the complexity of elderly care work and describe several aspects that are important for work satisfaction among health professionals. The results reveal that work satisfaction is dependent on social interrelations and cohesion in the work team, in possibilities to use humour and to have fun together, and in the ability to work as professionals to provide client-centered elderly care. Power relations

First research coordination meeting on reference database for neutron activation analysis. Summary report

International Nuclear Information System (INIS)

Firestone, R.B.; Trkov, A.

2005-10-01

Potential problems associated with nuclear data for neutron activation analysis were identified, the scope of the work to be undertaken was defined together with its priorities, and tasks were assigned to participants. Data testing and measurements refer to gamma spectrum peak evaluations, detector efficiency calibration, neutron spectrum characteristics and reference materials analysis. (author)

Stored object knowledge and the production of referring expressions : The case of color typicality

NARCIS (Netherlands)

Westerbeek, Hans; Koolen, Ruud; Maes, A.A.

2015-01-01

When speakers describe objects with atypical properties, do they include these properties in their referring expressions, even when that is not strictly required for unique referent identification? Based on previous work, we predict that speakers mention the color of a target object more often when

Accuracy of references and quotations in veterinary journals.

Science.gov (United States)

Hinchcliff, K W; Bruce, N J; Powers, J D; Kipp, M L

1993-02-01

The accuracy of references and quotations used to substantiate statements of fact in articles published in 6 frequently cited veterinary journals was examined. Three hundred references were randomly selected, and the accuracy of each citation was examined. A subset of 100 references was examined for quotational accuracy; ie, the accuracy with which authors represented the work or assertions of the author being cited. Of the 300 references selected, 295 were located, and 125 major errors were found in 88 (29.8%) of them. Sixty-seven (53.6%) major errors were found involving authors, 12 (9.6%) involved the article title, 14 (11.2%) involved the book or journal title, and 32 (25.6%) involved the volume number, date, or page numbers. Sixty-eight minor errors were detected. The accuracy of 111 quotations from 95 citations in 65 articles was examined. Nine quotations were technical and not classified, 86 (84.3%) were classified as correct, 2 (1.9%) contained minor misquotations, and 14 (13.7%) contained major misquotations. We concluded that misquotations and errors in citations occur frequently in veterinary journals, but at a rate similar to that reported for other biomedical journals.

PEMANFAATAN REFERENCE MANAGEMENT SOFTWARE (RMS UNTUK PENYUSUNAN KARYA ILMIAH DI PERGURUAN TINGGI

Directory of Open Access Journals (Sweden)

mufid mufid

2014-07-01

Full Text Available Reference management software (RMS is useful application for  researchers,  lecturers  and  students  helping  them  to  compose scientifc paper. This software has  fuctioned to search online scientifc information, to save search results, and to write bibliography, includes making  citation  and  references  automatically,  to  facilitate  to  share references  with  other  users  and  to  sincron  references  web  based  on desktop or mobile phone.This  article  tries  to  introduce  RMS. Using  RMS,  error  on  writing citation  and  references  can  be  avoided,  publishing  of  scientifc works would be increased and more qualifed.

Performance of Healthcare Providers Regarding Iranian Women Experiencing Physical Domestic Violence in Isfahan.

Science.gov (United States)

Yousefnia, Nasim; Nekuei, Nafisehsadat; Farajzadegan, Ziba; Yadegarfar, Ghasem

2018-01-01

Domestic violence (DV) can threaten women's health. Healthcare providers (HCPs) may be the first to come into contact with a victim of DV. Their appropriate performance regarding a DV victim can decrease its complications. The aim of the present study was to investigate HCPs' performance regarding women experiencing DV in emergency and maternity wards of hospitals in Isfahan, Iran. The present descriptive, cross-sectional study was conducted among 300 HCPs working in emergency and maternity wards in hospitals in Isfahan. The participants were selected using quota random sampling from February to May 2016. A researcher-made questionnaire containing the five items of HCPs performance regarding DV (assessment, intervention, documentation, reference, and follow-up) was used to collect data. The reliability and validity of the questionnaire were confirmed, and the collected data were analyzed using SPSS software. Cronbach's alpha was used to assess the reliability of the questionnaires. To present a general description of the data (variables, mean, and standard deviation), the table of frequencies was designed. The performance of the participants regarding DV in the assessment (mean = 64.22), intervention (mean = 68.55), and reference stages (mean = 68.32) were average. However, in the documentation (mean = 72.55) and follow-up stages (mean = 23.10), their performance was good and weak respectively (criterion from 100). Based on the results, because of defects in providing services for women experiencing DV, a practical indigenous guideline should be provided to treat and support these women.

Dissociating Working Memory Updating and Automatic Updating: The Reference-Back Paradigm

Science.gov (United States)

Rac-Lubashevsky, Rachel; Kessler, Yoav

2016-01-01

Working memory (WM) updating is a controlled process through which relevant information in the environment is selected to enter the gate to WM and substitute its contents. We suggest that there is also an automatic form of updating, which influences performance in many tasks and is primarily manifested in reaction time sequential effects. The goal…

Validation of Suitable Reference Genes for RT-qPCR Data in Achyranthes bidentata Blume under Different Experimental Conditions

Directory of Open Access Journals (Sweden)

Jinting Li

2017-05-01

Full Text Available Real-time quantitative polymerase chain reaction (RT-qPCR is a sensitive technique for gene expression studies. However, choosing the appropriate reference gene is essential to obtain reliable results for RT-qPCR assays. In the present work, the expression of eight candidate reference genes, EF1-α (elongation factor 1-α, GAPDH (glyceraldehyde 3-phosphate dehydrogenase, UBC (ubiquitin-conjugating enzyme, UBQ (polyubiquitin, ACT (actin, β-TUB (β-tubulin, APT1 (adenine phosphoribosyltransferase 1, and 18S rRNA (18S ribosomal RNA, was evaluated in Achyranthes bidentata samples using two algorithms, geNorm and NormFinder. The samples were classified into groups according to developmental stages, various tissues, stresses (cold, heat, drought, NaCl, and hormone treatments (MeJA, IBA, SA. Suitable combination of reference genes for RT-qPCR normalization should be applied according to different experimental conditions. In this study, EF1-α, UBC, and ACT genes were verified as the suitable reference genes across all tested samples. To validate the suitability of the reference genes, we evaluated the relative expression of CAS, which is a gene that may be involved in phytosterol synthesis. Our results provide the foundation for gene expression analysis in A. bidentata and other species of Amaranthaceae.

Reference and PDF-manager software: complexities, support and workflow.

Science.gov (United States)

Mead, Thomas L; Berryman, Donna R

2010-10-01

In the past, librarians taught reference management by training library users to use established software programs such as RefWorks or EndNote. In today's environment, there is a proliferation of Web-based programs that are being used by library clientele that offer a new twist on the well-known reference management programs. Basically, these new programs are PDF-manager software (e.g., Mendeley or Papers). Librarians are faced with new questions, issues, and concerns, given the new workflows and pathways that these PDF-manager programs present. This article takes a look at some of those.

Validation of suitable reference genes for expression normalization in Echinococcus spp. larval stages.

Science.gov (United States)

Espínola, Sergio Martin; Ferreira, Henrique Bunselmeyer; Zaha, Arnaldo

2014-01-01

In recent years, a significant amount of sequence data (both genomic and transcriptomic) for Echinococcus spp. has been published, thereby facilitating the analysis of genes expressed during a specific stage or involved in parasite development. To perform a suitable gene expression quantification analysis, the use of validated reference genes is strongly recommended. Thus, the aim of this work was to identify suitable reference genes to allow reliable expression normalization for genes of interest in Echinococcus granulosus sensu stricto (s.s.) (G1) and Echinococcus ortleppi upon induction of the early pre-adult development. Untreated protoscoleces (PS) and pepsin-treated protoscoleces (PSP) from E. granulosus s.s. (G1) and E. ortleppi metacestode were used. The gene expression stability of eleven candidate reference genes (βTUB, NDUFV2, RPL13, TBP, CYP-1, RPII, EF-1α, βACT-1, GAPDH, ETIF4A-III and MAPK3) was assessed using geNorm, Normfinder, and RefFinder. Our qPCR data showed a good correlation with the recently published RNA-seq data. Regarding expression stability, EF-1α and TBP were the most stable genes for both species. Interestingly, βACT-1 (the most commonly used reference gene), and GAPDH and ETIF4A-III (previously identified as housekeeping genes) did not behave stably in our assay conditions. We propose the use of EF-1α as a reference gene for studies involving gene expression analysis in both PS and PSP experimental conditions for E. granulosus s.s. and E. ortleppi. To demonstrate its applicability, EF-1α was used as a normalizer gene in the relative quantification of transcripts from genes coding for antigen B subunits. The same EF-1α reference gene may be used in studies with other Echinococcus sensu lato species. This report validates suitable reference genes for species of class Cestoda, phylum Platyhelminthes, thus providing a foundation for further validation in other epidemiologically important cestode species, such as those from the

Validation of Suitable Reference Genes for Expression Normalization in Echinococcus spp. Larval Stages

Science.gov (United States)

Espínola, Sergio Martin; Ferreira, Henrique Bunselmeyer; Zaha, Arnaldo

2014-01-01

In recent years, a significant amount of sequence data (both genomic and transcriptomic) for Echinococcus spp. has been published, thereby facilitating the analysis of genes expressed during a specific stage or involved in parasite development. To perform a suitable gene expression quantification analysis, the use of validated reference genes is strongly recommended. Thus, the aim of this work was to identify suitable reference genes to allow reliable expression normalization for genes of interest in Echinococcus granulosus sensu stricto (s.s.) (G1) and Echinococcus ortleppi upon induction of the early pre-adult development. Untreated protoscoleces (PS) and pepsin-treated protoscoleces (PSP) from E. granulosus s.s. (G1) and E. ortleppi metacestode were used. The gene expression stability of eleven candidate reference genes (βTUB, NDUFV2, RPL13, TBP, CYP-1, RPII, EF-1α, βACT-1, GAPDH, ETIF4A-III and MAPK3) was assessed using geNorm, Normfinder, and RefFinder. Our qPCR data showed a good correlation with the recently published RNA-seq data. Regarding expression stability, EF-1α and TBP were the most stable genes for both species. Interestingly, βACT-1 (the most commonly used reference gene), and GAPDH and ETIF4A-III (previously identified as housekeeping genes) did not behave stably in our assay conditions. We propose the use of EF-1α as a reference gene for studies involving gene expression analysis in both PS and PSP experimental conditions for E. granulosus s.s. and E. ortleppi. To demonstrate its applicability, EF-1α was used as a normalizer gene in the relative quantification of transcripts from genes coding for antigen B subunits. The same EF-1α reference gene may be used in studies with other Echinococcus sensu lato species. This report validates suitable reference genes for species of class Cestoda, phylum Platyhelminthes, thus providing a foundation for further validation in other epidemiologically important cestode species, such as those from the