A model for diffuse and global irradiation on horizontal surface

International Nuclear Information System (INIS)

Jain, P.C.

1984-01-01

The intensity of the direct radiation and the diffuse radiation at any time on a horizontal surface are each expressed as fractions of the intensity of the extraterrestrial radiation. Using these and assuming a random distribution of the bright sunshine hours and not too wide variations in the values of the transmission coefficients, a number of relations for estimating the global and the diffuse irradiation are derived. Two of the relations derived are already known empirically. The formulation lends more confidence in the use of the already empirically known relations providing them a theoretical basis, and affords more flexibility to the estimation techniques by supplying new equations. The study identifies three independent basic parameters and the constants appearing in the various equations as simple functions of these three basic parameters. Experimental data for the diffuse irradiation, the global irradiation and the bright sunshine duration for Macerata (Italy), Salisbury and Bulawayo (Zimbabwe) is found to show good correlation for the linear equations, and the nature and the interrelationships of the constants are found to be as predicted by the theory

Global trends of acceptance and trade in irradiated foods

Energy Technology Data Exchange (ETDEWEB)

Matin, M A [Food and Environmental Protection Section, Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, International Atomic Energy Agency, Vienna (Austria)

2001-05-01

Issues as relevant to wide scale application of food irradiation are presented in this paper to provide current status of the technology. Global development on key issues such as public acceptance, public health improvement, safety and wholesomeness, regulatory aspects, potential application of the technology to ease quarantine problems in the trade of food and agricultural commodities as a viable alternative to fumigation with methyl bromide have been presented. Irradiation ensures the hygienic quality of food and extends shelf-life. Many international organizations and respected regional/national bodies agree on the merits of the technique and valuable contribution that the process can offer to safeguard the food supply worldwide. Codex General Standard for irradiated food and the associated Code of Practice for operation of the irradiation facilities used for the treatment of foods adopted in 1983 forms the regulatory basis for commercial utilization of the processing technology. More than 40 countries of the world have Standards/Regulations to process one or more food products by the irradiation process. Efforts are underway to harmonise national regulations on food irradiation to remove obstacles for international trade of irradiated products. There is a rapid development on commercial application of food irradiation in the USA and elsewhere in the past few months. There are already several existing commercial irradiators available for treating food in the USA and many more are planned to be built. Such commercial food irradiation facilities are also in different stage of development in Brazil, India, Mexico, Thailand, People's Republic of China, Republic of Korea. Roles of irradiation ensuring food safety, contributing food security and facilitating trade are more and more recognized in developed and developing countries alike. (author)

Global trends of acceptance and trade in irradiated foods

International Nuclear Information System (INIS)

Matin, M.A.

2001-01-01

Issues as relevant to wide scale application of food irradiation are presented in this paper to provide current status of the technology. Global development on key issues such as public acceptance, public health improvement, safety and wholesomeness, regulatory aspects, potential application of the technology to ease quarantine problems in the trade of food and agricultural commodities as a viable alternative to fumigation with methyl bromide have been presented. Irradiation ensures the hygienic quality of food and extends shelf-life. Many international organizations and respected regional/national bodies agree on the merits of the technique and valuable contribution that the process can offer to safeguard the food supply worldwide. Codex General Standard for irradiated food and the associated Code of Practice for operation of the irradiation facilities used for the treatment of foods adopted in 1983 forms the regulatory basis for commercial utilization of the processing technology. More than 40 countries of the world have Standards/Regulations to process one or more food products by the irradiation process. Efforts are underway to harmonise national regulations on food irradiation to remove obstacles for international trade of irradiated products. There is a rapid development on commercial application of food irradiation in the USA and elsewhere in the past few months. There are already several existing commercial irradiators available for treating food in the USA and many more are planned to be built. Such commercial food irradiation facilities are also in different stage of development in Brazil, India, Mexico, Thailand, People's Republic of China, Republic of Korea. Roles of irradiation ensuring food safety, contributing food security and facilitating trade are more and more recognized in developed and developing countries alike. (author)

Techniques for the estimation of global irradiation from sunshine duration and global irradiation estimation for Italian locations

International Nuclear Information System (INIS)

Jain, P.C.

1984-04-01

Angstrom equation H=H 0 (a+bS/S 0 ) has been fitted using the least-square method to the global irradiation and the sunshine duration data of 31 Italian locations for the duration 1965-1974. Three more linear equations: i) the equation H'=H 0 (a+bS/S 0 ), obtained by incorporating the effect of the multiple reflections between the earth's surface and the atmosphere, ii) the equation H=H 0 (a+bS/S' 0 ), obtained by incorporating the effect of not burning of the sunshine recorder chart when the elevation of the sun is less than 5 deg., and iii) the equation H'=H 0 (a+bS/S' 0 ), obtained by incorporating both the above effects simultaneously, have also each been fitted to the same data. Good correlation with correlation coefficients around 0.9 or more are obtained for most of the locations with all the four equations. Substantial spatial scatter is obtained in the values of the regression parameters. The use of any of the three latter equations does not result in any advantage over that of the simpler Angstrom equation; it neither results in a decrease in the spatial scatter in the values of the regression parameters nor does it yield better correlation. The computed values of the regression parameters in the Angstrom equation yield estimates of the global irradiation that are on the average within +- 4% of the measured values for most of the locations. (author)

Generation of daily global solar irradiation with support vector machines for regression

International Nuclear Information System (INIS)

Antonanzas-Torres, F.; Urraca, R.; Antonanzas, J.; Fernandez-Ceniceros, J.; Martinez-de-Pison, F.J.

2015-01-01

Highlights: • New methodology for estimation of daily solar irradiation with SVR. • Automatic procedure for training models and selecting meteorological features. • This methodology outperforms other well-known parametric and numeric techniques. - Abstract: Solar global irradiation is barely recorded in isolated rural areas around the world. Traditionally, solar resource estimation has been performed using parametric-empirical models based on the relationship of solar irradiation with other atmospheric and commonly measured variables, such as temperatures, rainfall, and sunshine duration, achieving a relatively high level of certainty. Considerable improvement in soft-computing techniques, which have been applied extensively in many research fields, has lead to improvements in solar global irradiation modeling, although most of these techniques lack spatial generalization. This new methodology proposes support vector machines for regression with optimized variable selection via genetic algorithms to generate non-locally dependent and accurate models. A case of study in Spain has demonstrated the value of this methodology. It achieved a striking reduction in the mean absolute error (MAE) – 41.4% and 19.9% – as compared to classic parametric models; Bristow & Campbell and Antonanzas-Torres et al., respectively

Estimation of hourly global solar irradiation on tilted planes from horizontal one using artificial neural networks

International Nuclear Information System (INIS)

Notton, Gilles; Paoli, Christophe; Vasileva, Siyana; Nivet, Marie Laure; Canaletti, Jean-Louis; Cristofari, Christian

2012-01-01

Calculating global solar irradiation from global horizontal irradiation only is a difficult task, especially when the time step is small and the data are not averaged. We used an Artificial Neural Network (ANN) to realize this conversion. The ANN is optimized and tested on the basis of five years of solar data; the accuracy of the optimal configuration is around 6% for the RRMSE (relative root mean square error) and around 3.5% for the RMAE (relative mean absolute value) i.e. a better performance than the empirical correlations available in the literature. -- Highlights: ► ANN (Artificial Neural Network) methodology applied to hourly global solar irradiation in order to estimate tilted irradiations. ► Model validation with more than 23,000 data. ► Comparison with “conventional” models. ► The precision in the results is better than with empirical correlations. ► 6% for the RMSE (root means square error) and around 3.5% for the RMAE (Relative Mean Absolute Value).

Astronomical relativistic reference systems with multipolar expansion: the global one

International Nuclear Information System (INIS)

Xie Yi

2014-01-01

With the rapid development of techniques for astronomical observations, the precision of measurements has been significantly increasing. Theories describing astronomical relativistic reference systems, which are the foundation for processing and interpreting these data now and in the future, may require extensions to satisfy the needs of these trends. Besides building a framework compatible with alternative theories of gravity and the pursuit of higher order post-Newtonian approximation, it will also be necessary to make the first order post-Newtonian multipole moments of celestial bodies be explicitly expressed in the astronomical relativistic reference systems. This will bring some convenience into modeling the observations and experiments and make it easier to distinguish different contributions in measurements. As a first step, the global solar system reference system is expressed as a multipolar expansion and the post-Newtonian mass and spin moments are shown explicitly in the metric which describes the coordinates of the system. The full expression of the global metric is given. (research papers)

Reference manual on the IAEA JRQ correlation monitor steel for irradiation damage studies

International Nuclear Information System (INIS)

2001-07-01

The objective of this report is to provide information on the mechanical properties of the ASTM A533 grade B class 1 steel that was designated as 'JRQ reference steel' and for many years served as a radiation/mechanical property correlation monitor in a number of international and national studies of irradiation embrittlement of reactor pressure vessel steel. This report provides the most comprehensive listing of material test data obtained on the JRQ manufacturing history and material properties in the initial, and as delivered condition during the implementation of two IAEA co-ordinated research projects (CRPs) on behaviour of reactor pressure vessel steels under neutron irradiation

Directional and Spectral Irradiance in Ocean Models: Effects on Simulated Global Phytoplankton, Nutrients, and Primary Production

Science.gov (United States)

Gregg, Watson W.; Rousseaux, Cecile S.

2016-01-01

The importance of including directional and spectral light in simulations of ocean radiative transfer was investigated using a coupled biogeochemical-circulation-radiative model of the global oceans. The effort focused on phytoplankton abundances, nutrient concentrations and vertically-integrated net primary production. The importance was approached by sequentially removing directional (i.e., direct vs. diffuse) and spectral irradiance and comparing results of the above variables to a fully directionally and spectrally-resolved model. In each case the total irradiance was kept constant; it was only the pathways and spectral nature that were changed. Assuming all irradiance was diffuse had negligible effect on global ocean primary production. Global nitrate and total chlorophyll concentrations declined by about 20% each. The largest changes occurred in the tropics and sub-tropics rather than the high latitudes, where most of the irradiance is already diffuse. Disregarding spectral irradiance had effects that depended upon the choice of attenuation wavelength. The wavelength closest to the spectrally-resolved model, 500 nm, produced lower nitrate (19%) and chlorophyll (8%) and higher primary production (2%) than the spectral model. Phytoplankton relative abundances were very sensitive to the choice of non-spectral wavelength transmittance. The combined effects of neglecting both directional and spectral irradiance exacerbated the differences, despite using attenuation at 500 nm. Global nitrate decreased 33% and chlorophyll decreased 24%. Changes in phytoplankton community structure were considerable, representing a change from chlorophytes to cyanobacteria and coccolithophores. This suggested a shift in community function, from light-limitation to nutrient limitation: lower demands for nutrients from cyanobacteria and coccolithophores favored them over the more nutrient-demanding chlorophytes. Although diatoms have the highest nutrient demands in the model, their

Calculating spectral direct solar irradiance, diffuse and global in Heredia, Costa Rica

International Nuclear Information System (INIS)

Wright, Jaime

2008-01-01

A spectral model under conditions of clear skies has described the flow of solar irradiation and is verified experimentally in Heredia, Costa Rica. A description of the model is presented by comparing its results with experimental measurements. The model has calculated the spectral flows of the global solar irradiation, direct and diffuse incident on a horizontal surface. Necessary input data include latitude, altitude, surface albedo as characteristics of a locality, and atmospheric characteristics: turbidity, precipitable water vapor, total ozone content and the optical thickness of a particular subject. The results show satisfactory values. (author) [es

Analysis of Global Solar Irradiance over Climatic Zones in Nigeria for Solar Energy Applications

Directory of Open Access Journals (Sweden)

Adekunle Ayodotun Osinowo

2015-01-01

Full Text Available Satellite derived solar irradiance over 25 locations in the 5 climatic zones of Nigeria (tropical rainforest TRF, Guinea savannah GS, Sahel savannah SHS, Sudan savannah SUS, and Mangrove swamp forest MSF was analyzed. To justify its use, the satellite data was tested for goodness of agreement with ground measured solar radiation data using 26-year mean monthly and daily data over 16 locations in the 5 climatic zones. The well-known R2, RMSE, MBE, and MPE statistical tests were used and good agreement was found. The 25 locations were grouped into the 5 climatic zones. Frequency distribution of global solar irradiance was done for each of the climatic zones. This showed that 46.88%, and 40.6% of the number of days (9794 over TRF and MSF, respectively, had irradiation within the range of 15.01–20.01 MJ/m2/day. For the GS, SHS, and SUS, 46.19%, 55.84% and 58.53% of the days had total irradiation within the range of 20.01–25.01 MJ/m2/day, respectively. Generally, in all the climatic zones, coefficients of variation of solar radiation were high and mean values were low in July and August. Contour maps showed that high and low values of global solar irradiance and clearness index were observed in the Northern and Southern locations of Nigeria, respectively.

Semi-empirical models for the estimation of clear sky solar global and direct normal irradiances in the tropics

International Nuclear Information System (INIS)

Janjai, S.; Sricharoen, K.; Pattarapanitchai, S.

2011-01-01

Highlights: → New semi-empirical models for predicting clear sky irradiance were developed. → The proposed models compare favorably with other empirical models. → Performance of proposed models is comparable with that of widely used physical models. → The proposed models have advantage over the physical models in terms of simplicity. -- Abstract: This paper presents semi-empirical models for estimating global and direct normal solar irradiances under clear sky conditions in the tropics. The models are based on a one-year period of clear sky global and direct normal irradiances data collected at three solar radiation monitoring stations in Thailand: Chiang Mai (18.78 o N, 98.98 o E) located in the North of the country, Nakhon Pathom (13.82 o N, 100.04 o E) in the Centre and Songkhla (7.20 o N, 100.60 o E) in the South. The models describe global and direct normal irradiances as functions of the Angstrom turbidity coefficient, the Angstrom wavelength exponent, precipitable water and total column ozone. The data of Angstrom turbidity coefficient, wavelength exponent and precipitable water were obtained from AERONET sunphotometers, and column ozone was retrieved from the OMI/AURA satellite. Model validation was accomplished using data from these three stations for the data periods which were not included in the model formulation. The models were also validated against an independent data set collected at Ubon Ratchathani (15.25 o N, 104.87 o E) in the Northeast. The global and direct normal irradiances calculated from the models and those obtained from measurements are in good agreement, with the root mean square difference (RMSD) of 7.5% for both global and direct normal irradiances. The performance of the models was also compared with that of other models. The performance of the models compared favorably with that of empirical models. Additionally, the accuracy of irradiances predicted from the proposed model are comparable with that obtained from some

On the influence of total solar irradiance on global land temperature

International Nuclear Information System (INIS)

Varonov, Albert; Shopov, Yavor

2014-01-01

Using statistical analysis, correlation between the variations of the total solar irradiance and of the annual-mean land temperatures was found. An unknown time lag between both data sets was expected to be present due to the complexity of the Earth’s climate system leading to a delayed response to changes in influencing factors. We found the best correlation with coefficient over 90% for a 14-year shift of the annual mean land temperature record ahead with data until 1970, while the same comparison with data until 2006 yields 61% correlation. These results show substantially higher influence of total solar irradiance on global land temperatures until 1970. The decline of this influence during the last 40 years could be attributed to the increasing concentration of anthropogenic greenhouse gases in the Earth’s atmosphere. Key words: total solar irradiance, solar variations, solar forcing, climate change

A method for improving global pyranometer measurements by modeling responsivity functions

Energy Technology Data Exchange (ETDEWEB)

Lester, A. [Smith College, Northampton, MA 01063 (United States); Myers, D.R. [National Renewable Energy Laboratory, 1617 Cole Blvd., Golden, CO 80401 (United States)

2006-03-15

Accurate global solar radiation measurements are crucial to climate change research and the development of solar energy technologies. Pyranometers produce an electrical signal proportional to global irradiance. The signal-to-irradiance ratio is the responsivity (RS) of the instrument (RS=signal/irradiance=microvolts/(W/m{sup 2})). Most engineering measurements are made using a constant RS. It is known that RS varies with day of year, zenith angle, and net infrared radiation. This study proposes a method to find an RS function to model a pyranometer's changing RS. Using a reference irradiance calculated from direct and diffuse instruments, we found instantaneous RS for two global pyranometers over 31 sunny days in a two-year period. We performed successive independent regressions of the error between the constant and instantaneous RS with respect to zenith angle, day of year, and net infrared to obtain an RS function. An alternative method replaced the infrared regression with an independently developed technique to account for thermal offset. Results show improved uncertainties with the function method than with the single-calibration value. Lower uncertainties also occur using a black-and-white (8-48), rather than all-black (PSP), shaded pyranometer as the diffuse reference instrument. We conclude that the function method is extremely effective in reducing uncertainty in the irradiance measurements for global PSP pyranometers if they are calibrated at the deployment site. Furthermore, it was found that the function method accounts for the pyranometer's thermal offset, rendering further corrections unnecessary. The improvements in irradiance data achieved in this study will serve to increase the accuracy of solar energy assessments and atmospheric research. (author)

Calibration procedure of Hukseflux SR25 to Establish the Diffuse Reference for the Outdoor Broadband Radiometer Calibration

Energy Technology Data Exchange (ETDEWEB)

Reda, Ibrahim M. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Andreas, Afshin M. [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-08-01

Accurate pyranometer calibrations, traceable to internationally recognized standards, are critical for solar irradiance measurements. One calibration method is the component summation method, where the pyranometers are calibrated outdoors under clear sky conditions, and the reference global solar irradiance is calculated as the sum of two reference components, the diffuse horizontal and subtended beam solar irradiances. The beam component is measured with pyrheliometers traceable to the World Radiometric Reference, while there is no internationally recognized reference for the diffuse component. In the absence of such a reference, we present a method to consistently calibrate pyranometers for measuring the diffuse component. The method is based on using a modified shade/unshade method and a pyranometer with less than 0.5 W/m2 thermal offset. The calibration result shows that the responsivity of Hukseflux SR25 pyranometer equals 10.98 uV/(W/m2) with +/-0.86 percent uncertainty.

Determination of atmospheric parameters to estimate global radiation in areas of complex topography: Generation of global irradiation map

Energy Technology Data Exchange (ETDEWEB)

Batlles, F.J.; Bosch, J.L. [Dpto. Fisica Aplicada, Universidad de Almeria, 04120 Almeria (Spain); Tovar-Pescador, J. [Dpto. Fisica, Universidad de Jaen, 23071 Jaen (Spain); Martinez-Durban, M. [Dpto. Ingenieria Lenguajes y Computacion, Universidad de Almeria, 04120 Almeria (Spain); Ortega, R. [Dpto. Edafologia y Quimica Agricola, Universidad de Almeria, 04120 Almeria (Spain); Miralles, I. [Dpto. Edafologia y Quimica Agricola, Universidad de Granada, 28071 Granada (Spain)

2008-02-15

Incoming shortwave solar radiation is an important parameter in environmental applications. A detailed spatial and temporal analysis of global solar radiation on the earth surface is needed in many applications, ranging from solar energy uses to the study of agricultural, forest and biological processes. At local scales, the topography is the most important factor in the distribution of solar radiation on the surface. The variability of the elevation, the surface orientation and the obstructions due to elevations are a source of great local differences in insolation and, consequently, in other variables as ground temperature. For this reason, several models based on GIS techniques have been recently developed, integrating topography to obtain the solar radiation on the surface. In this work, global radiation is analyzed with the Solar Analyst, a model implemented on ArcView, that computes the topographic parameters: altitude, latitude, slope and orientation (azimuth) and shadow effects. Solar Analyst uses as input parameters the diffuse fraction and the transmittance. These parameters are not usually available in radiometric networks in mountainous areas. In this work, a method to obtain both parameters from global radiation is proposed. Global radiation data obtained in two networks of radiometric stations is used: one located in Sierra Magina Natural Park (Spain) with 11 stations and another one located on the surroundings of Sierra Nevada Natural Park (Spain) with 14 stations. Daily solar irradiation is calculated from a digital terrain model (DTM), the daily diffuse fraction, K, and daily atmospheric transmittivity, {tau}. Results provided by the model have been compared with measured values. An overestimation for high elevations is observed, whereas low altitudes present underestimation. The best performance was also reported during summer months, and the worst results were obtained during winter. Finally, a yearly global solar irradiation map has been

Evaluation of the desert dust effects on global, direct and diffuse spectral ultraviolet irradiance

Directory of Open Access Journals (Sweden)

R. Román

2013-01-01

Full Text Available This paper presents a study of a strong desert dust episode over the Iberian Peninsula, and its effect on the spectral ultraviolet (UV irradiance in Granada, Spain. Remote sensing measurements, forecast models, and synoptic analysis are used to identify a Saharan desert dust outbreak that affected the Iberian Peninsula starting 20 July 2009. Additionally, a Bentham DMc150 spectroradiometer is employed to obtain global, direct and diffuse spectral UV irradiances every 15 minutes in Granada. The desert dust caused a large attenuation of the direct UV irradiance (up to 55%, while the diffuse UV irradiance increased up to 40% at 400 nm. The UVSPEC/LibRadtran radiative transfer model is used to study the spectral dependence of the experimental UV irradiance ratios (ratios of spectral irradiance for the day with the highest aerosol load to that measured in days with low–moderate load. The spectral increase or decrease of the UV direct irradiance ratios depends on a new parameter: a threshold wavelength. The spectral dependence of the UV diffuse irradiance ratio can be explained because under the influence of the intense dust outbreak, the Mie scattering by aerosols at shorter wavelengths is stronger than the Rayleigh scattering by gases. Finally, the sensitivity analysis of the aerosol absorption properties shows a substantial attenuation of UV spectral irradiance with a weak spectral dependence.

Statistical considerations for harmonization of the global multicenter study on reference values.

Science.gov (United States)

Ichihara, Kiyoshi

2014-05-15

The global multicenter study on reference values coordinated by the Committee on Reference Intervals and Decision Limits (C-RIDL) of the IFCC was launched in December 2011, targeting 45 commonly tested analytes with the following objectives: 1) to derive reference intervals (RIs) country by country using a common protocol, and 2) to explore regionality/ethnicity of reference values by aligning test results among the countries. To achieve these objectives, it is crucial to harmonize 1) the protocol for recruitment and sampling, 2) statistical procedures for deriving the RI, and 3) test results through measurement of a panel of sera in common. For harmonized recruitment, very lenient inclusion/exclusion criteria were adopted in view of differences in interpretation of what constitutes healthiness by different cultures and investigators. This policy may require secondary exclusion of individuals according to the standard of each country at the time of deriving RIs. An iterative optimization procedure, called the latent abnormal values exclusion (LAVE) method, can be applied to automate the process of refining the choice of reference individuals. For global comparison of reference values, test results must be harmonized, based on the among-country, pair-wise linear relationships of test values for the panel. Traceability of reference values can be ensured based on values assigned indirectly to the panel through collaborative measurement of certified reference materials. The validity of the adopted strategies is discussed in this article, based on interim results obtained to date from five countries. Special considerations are made for dissociation of RIs by parametric and nonparametric methods and between-country difference in the effect of body mass index on reference values. Copyright © 2014 Elsevier B.V. All rights reserved.

A global vertical reference frame based on four regional vertical datums

Czech Academy of Sciences Publication Activity Database

Burša, Milan; Kenyon, S.; Kouba, J.; Šíma, Zdislav; Vatrt, V.; Vojtíšková, M.

2004-01-01

Roč. 48, č. 3 (2004), s. 493-502 ISSN 0039-3169 Institutional research plan: CEZ:AV0Z1003909 Keywords : geopotentinal * local vertical datums * global vertical reference frame Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 0.447, year: 2004

Food irradiation: a global scenario

International Nuclear Information System (INIS)

Sadat, T.; Ross, A.; Leveziel, H.

1994-01-01

Many of the foods that will be consumed in the 21st century have not yet been invented. New methods of production need new methods of conservation. Food irradiation by gamma radiation or electron beam is a new technology. The intensive production methods of today lead to several potential dangers. For example - if just one chicken is diseased this bird can contaminate all of one days' production at the slaughter house - on average 300,000 birds per day. One has to have conservation methods that can decontaminate the poultry meat. Irradiation is a method that achieves this. The consumer is becoming more and more sophisticated and demanding with regard to the quality of food products, rejecting chemical additives for example, irradiation is a physical method of conservation, this means that there is no residue left in the product, and that there are no changes in the physical characteristics of the food. This paper examines the use of irradiation technology as a food conservation method in today's industry. (author). 4 refs., 2 tabs

Estimation of global daily irradiation in complex topography zones using digital elevation models and meteosat images: Comparison of the results

International Nuclear Information System (INIS)

Martinez-Durban, M.; Zarzalejo, L.F.; Bosch, J.L.; Rosiek, S.; Polo, J.; Batlles, F.J.

2009-01-01

The knowledge of the solar irradiation in a certain place is fundamental for the suitable location of solar systems, both thermal and photovoltaic. On the local scale, the topography is the most important modulating factor of the solar irradiation on the surface. In this work the global daily irradiation is estimated concerning various sky conditions, in zones of complex topography. In order to estimate the global daily irradiation we use a methodology based on a Digital Terrain Model (DTM), on one hand making use of pyranometer measurements and on the other hand utilizing satellite images. We underline that DTM application employing pyranometer measurements produces better results than estimation using satellite images, though accuracy of the same order is obtained in both cases for Root Mean Square Error (RMSE) and Mean Bias Error (MBE).

Estimation of global daily irradiation in complex topography zones using digital elevation models and meteosat images: Comparison of the results

Energy Technology Data Exchange (ETDEWEB)

Martinez-Durban, M. [Dpto. de Lenguajes y Computacion, Universidad de Almeria, 04120 Almeria (Spain); Zarzalejo, L.F.; Polo, J. [Dpto. de Energia, CIEMAT, 28040 Madrid (Spain); Bosch, J.L.; Rosiek, S.; Batlles, F.J. [Dpto. Fisica Aplicada, Universidad de Almeria, 04120 Almeria (Spain)

2009-09-15

The knowledge of the solar irradiation in a certain place is fundamental for the suitable location of solar systems, both thermal and photovoltaic. On the local scale, the topography is the most important modulating factor of the solar irradiation on the surface. In this work the global daily irradiation is estimated concerning various sky conditions, in zones of complex topography. In order to estimate the global daily irradiation we use a methodology based on a Digital Terrain Model (DTM), on one hand making use of pyranometer measurements and on the other hand utilizing satellite images. We underline that DTM application employing pyranometer measurements produces better results than estimation using satellite images, though accuracy of the same order is obtained in both cases for Root Mean Square Error (RMSE) and Mean Bias Error (MBE). (author)

Estimation of daily global solar irradiation by coupling ground measurements of bright sunshine hours to satellite imagery

International Nuclear Information System (INIS)

Ener Rusen, Selmin; Hammer, Annette; Akinoglu, Bulent G.

2013-01-01

In this work, the current version of the satellite-based HELIOSAT method and ground-based linear Ångström–Prescott type relations are used in combination. The first approach is based on the use of a correlation between daily bright sunshine hours (s) and cloud index (n). In the second approach a new correlation is proposed between daily solar irradiation and daily data of s and n which is based on a physical parameterization. The performances of the proposed two combined models are tested against conventional methods. We test the use of obtained correlation coefficients for nearby locations. Our results show that the use of sunshine duration together with the cloud index is quite satisfactory in the estimation of daily horizontal global solar irradiation. We propose to use the new approaches to estimate daily global irradiation when the bright sunshine hours data is available for the location of interest, provided that some regression coefficients are determined using the data of a nearby station. In addition, if surface data for a close location does not exist then it is recommended to use satellite models like HELIOSAT or the new approaches instead the Ångström type models. - Highlights: • Satellite imagery together with surface measurements in solar radiation estimation. • The new coupled and conventional models (satellite and ground-based) are analyzed. • New models result in highly accurate estimation of daily global solar irradiation

Artificial intelligence techniques applied to hourly global irradiance estimation from satellite-derived cloud index

Energy Technology Data Exchange (ETDEWEB)

Zarzalejo, L.F.; Ramirez, L.; Polo, J. [DER-CIEMAT, Madrid (Spain). Renewable Energy Dept.

2005-07-01

Artificial intelligence techniques, such as fuzzy logic and neural networks, have been used for estimating hourly global radiation from satellite images. The models have been fitted to measured global irradiance data from 15 Spanish terrestrial stations. Both satellite imaging data and terrestrial information from the years 1994, 1995 and 1996 were used. The results of these artificial intelligence models were compared to a multivariate regression based upon Heliosat I model. A general better behaviour was observed for the artificial intelligence models. (author)

Artificial intelligence techniques applied to hourly global irradiance estimation from satellite-derived cloud index

International Nuclear Information System (INIS)

Zarzalejo, Luis F.; Ramirez, Lourdes; Polo, Jesus

2005-01-01

Artificial intelligence techniques, such as fuzzy logic and neural networks, have been used for estimating hourly global radiation from satellite images. The models have been fitted to measured global irradiance data from 15 Spanish terrestrial stations. Both satellite imaging data and terrestrial information from the years 1994, 1995 and 1996 were used. The results of these artificial intelligence models were compared to a multivariate regression based upon Heliosat I model. A general better behaviour was observed for the artificial intelligence models

The generation of hourly diffuse irradiation: A model from the analysis of the fluctuation of global irradiance series

International Nuclear Information System (INIS)

Posadillo, R.; Lopez Luque, R.

2010-01-01

An analysis of models for the estimation of hourly diffuse irradiation based on the interrelations between the hourly diffuse fraction k d and the hourly clearness index k t , has concluded that k t is not a sufficient variable for parametrizing the effect of clouds on diffuse irradiation. A detailed study of the dispersion recorded by this diffuse component for a specific clearness index under partly cloudy sky conditions has led to analyzing how the variability in the instantaneous clearness index influences this dispersion. The data sets correspond to 10 years of hourly and instantaneous value records of global and diffuse radiation collected in Cordoba, Spain. In addition to the inclusion of the sine of solar elevation as a variable into the k d -k t correlations, this model propose the inclusion of others parameters related to the variability in the normalized clearness index within an hour and with the fluctuations presented by the time series of the instantaneous values of that index. Also presented is the implementation of an algorithm permitting both the determination of the hourly diffuse irradiation and the discrimination between the different sky conditions in those situations known by the designation partly cloudy sky.

A new reference global instrumental earthquake catalogue (1900-2009)

Science.gov (United States)

Di Giacomo, D.; Engdahl, B.; Bondar, I.; Storchak, D. A.; Villasenor, A.; Bormann, P.; Lee, W.; Dando, B.; Harris, J.

2011-12-01

For seismic hazard studies on a global and/or regional scale, accurate knowledge of the spatial distribution of seismicity, the magnitude-frequency relation and the maximum magnitudes is of fundamental importance. However, such information is normally not homogeneous (or not available) for the various seismically active regions of the Earth. To achieve the GEM objectives (www.globalquakemodel.org) of calculating and communicating earthquake risk worldwide, an improved reference global instrumental catalogue for large earthquakes spanning the entire 100+ years period of instrumental seismology is an absolute necessity. To accomplish this task, we apply the most up-to-date techniques and standard observatory practices for computing the earthquake location and magnitude. In particular, the re-location procedure benefits both from the depth determination according to Engdahl and Villaseñor (2002), and the advanced technique recently implemented at the ISC (Bondár and Storchak, 2011) to account for correlated error structure. With regard to magnitude, starting from the re-located hypocenters, the classical surface and body-wave magnitudes are determined following the new IASPEI standards and by using amplitude-period data of phases collected from historical station bulletins (up to 1970), which were not available in digital format before the beginning of this work. Finally, the catalogue will provide moment magnitude values (including uncertainty) for each seismic event via seismic moment, via surface wave magnitude or via other magnitude types using empirical relationships. References Engdahl, E.R., and A. Villaseñor (2002). Global seismicity: 1900-1999. In: International Handbook of Earthquake and Engineering Seismology, eds. W.H.K. Lee, H. Kanamori, J.C. Jennings, and C. Kisslinger, Part A, 665-690, Academic Press, San Diego. Bondár, I., and D. Storchak (2011). Improved location procedures at the International Seismological Centre, Geophys. J. Int., doi:10.1111/j

A global multicenter study on reference values: 1. Assessment of methods for derivation and comparison of reference intervals.

Science.gov (United States)

Ichihara, Kiyoshi; Ozarda, Yesim; Barth, Julian H; Klee, George; Qiu, Ling; Erasmus, Rajiv; Borai, Anwar; Evgina, Svetlana; Ashavaid, Tester; Khan, Dilshad; Schreier, Laura; Rolle, Reynan; Shimizu, Yoshihisa; Kimura, Shogo; Kawano, Reo; Armbruster, David; Mori, Kazuo; Yadav, Binod K

2017-04-01

The IFCC Committee on Reference Intervals and Decision Limits coordinated a global multicenter study on reference values (RVs) to explore rational and harmonizable procedures for derivation of reference intervals (RIs) and investigate the feasibility of sharing RIs through evaluation of sources of variation of RVs on a global scale. For the common protocol, rather lenient criteria for reference individuals were adopted to facilitate harmonized recruitment with planned use of the latent abnormal values exclusion (LAVE) method. As of July 2015, 12 countries had completed their study with total recruitment of 13,386 healthy adults. 25 analytes were measured chemically and 25 immunologically. A serum panel with assigned values was measured by all laboratories. RIs were derived by parametric and nonparametric methods. The effect of LAVE methods is prominent in analytes which reflect nutritional status, inflammation and muscular exertion, indicating that inappropriate results are frequent in any country. The validity of the parametric method was confirmed by the presence of analyte-specific distribution patterns and successful Gaussian transformation using the modified Box-Cox formula in all countries. After successful alignment of RVs based on the panel test results, nearly half the analytes showed variable degrees of between-country differences. This finding, however, requires confirmation after adjusting for BMI and other sources of variation. The results are reported in the second part of this paper. The collaborative study enabled us to evaluate rational methods for deriving RIs and comparing the RVs based on real-world datasets obtained in a harmonized manner. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Photosynthesis–irradiance parameters of marine phytoplankton: synthesis of a global data set

OpenAIRE

Bouman, HA; Platt, T; Doblin, M; Figueiras, FG; Gudmundsson, K; Gudfinnsson, HG; Huang, B; Hickman, A; Hiscock, M; Jackson, T; Lutz, VA; Melin, F; Rey, F; Pepin, P; Segura, V

2018-01-01

The photosynthetic performance of marine phytoplankton varies in response to a variety of factors, environmental and taxonomic. One of the aims of the MArine primary Production: model Parameters from Space (MAPPS) project of the European Space Agency is to assemble a global database of photosynthesis–irradiance (P-E) parameters from a range of oceanographic regimes as an aid to examining the basin-scale variability in the photophysiological response of marine phytoplankto...

A New Point of View on the Relationship Between Global Solar Irradiation and Sunshine Quantifiers

Czech Academy of Sciences Publication Activity Database

Brabec, Marek; Badescu, V.; Dumitrescu, A.; Paulescu, M.

2016-01-01

Roč. 126, March (2016), s. 252-263 ISSN 0038-092X Institutional support: RVO:67985807 Keywords : global solar irradiation * sunshine quantifiers * sunshine number * Angstrom equation * statistical modeling * regression analysis Subject RIV: BB - Applied Statistics, Operation al Research Impact factor: 4.018, year: 2016

The generation of hourly diffuse irradiation: A model from the analysis of the fluctuation of global irradiance series

Energy Technology Data Exchange (ETDEWEB)

Posadillo, R.; Lopez Luque, R. [Grupo de Investigacion de Fisica para las Energias y Recursos Renovables, Dpto. de Fisica Aplicada, UCO, Edificio C2 Campus de Rabanales, 14071 Cordoba (Spain)

2010-04-15

An analysis of models for the estimation of hourly diffuse irradiation based on the interrelations between the hourly diffuse fraction k{sub d} and the hourly clearness index k{sub t}, has concluded that k{sub t} is not a sufficient variable for parametrizing the effect of clouds on diffuse irradiation. A detailed study of the dispersion recorded by this diffuse component for a specific clearness index under partly cloudy sky conditions has led to analyzing how the variability in the instantaneous clearness index influences this dispersion. The data sets correspond to 10 years of hourly and instantaneous value records of global and diffuse radiation collected in Cordoba, Spain. In addition to the inclusion of the sine of solar elevation as a variable into the k{sub d}-k{sub t} correlations, this model propose the inclusion of others parameters related to the variability in the normalized clearness index within an hour and with the fluctuations presented by the time series of the instantaneous values of that index. Also presented is the implementation of an algorithm permitting both the determination of the hourly diffuse irradiation and the discrimination between the different sky conditions in those situations known by the designation partly cloudy sky. (author)

Food irradiation

International Nuclear Information System (INIS)

Beyers, M.

1977-01-01

The objectives of food irradiation are outlined. The interaction of irradiation with matter is then discussed with special reference to the major constituents of foods. The application of chemical analysis in the evaluation of the wholesomeness of irradiated foods is summarized [af

Reference methods and materials. A programme of support for regional and global marine pollution assessments

International Nuclear Information System (INIS)

1990-01-01

This document describes a programme of comprehensive support for regional and global marine pollution assessments developed by the United Nations Environment Programme (UNEP) in cooperation with the International Atomic Energy Agency (IAEA) and the Intergovernmental Oceanographic Commission (IOC) and with the collaboration of a number of other United Nations Specialized agencies including the Food and Agriculture Organisation (FAO), the World Meteorological Organisation (WMO), the World Health Organisation (WHO) and the International Maritime Organisation (IMO). Two of the principle components of this programme, Reference Methods and Reference materials are given special attention in this document and a full Reference Method catalogue is included, giving details of over 80 methods currently available or in an advanced stage of preparation and testing. It is important that these methods are seen as a functional component of a much wider strategy necessary for assuring good quality and intercomparable data for regional and global pollution monitoring and the user is encouraged to read this document carefully before employing Reference Methods and Reference Materials in his/her laboratory. 3 figs

Therapeutic approaches of hematopoietic syndrome after serious accidental global irradiation. Ex vivo expansion interest of hematopoietic cells

International Nuclear Information System (INIS)

Thierry, D.

1994-01-01

Aplasia is one of the main syndrome, appearing after one global accidental irradiation by one ionizing radiation source. The hematopoietic syndrome is characterized by a peripheric blood cell number fall; the cell marrow is reduced too

Mars Global Reference Atmospheric Model 2010 Version: Users Guide

Science.gov (United States)

Justh, H. L.

2014-01-01

This Technical Memorandum (TM) presents the Mars Global Reference Atmospheric Model 2010 (Mars-GRAM 2010) and its new features. Mars-GRAM is an engineering-level atmospheric model widely used for diverse mission applications. Applications include systems design, performance analysis, and operations planning for aerobraking, entry, descent and landing, and aerocapture. Additionally, this TM includes instructions on obtaining the Mars-GRAM source code and data files as well as running Mars-GRAM. It also contains sample Mars-GRAM input and output files and an example of how to incorporate Mars-GRAM as an atmospheric subroutine in a trajectory code.

Future global SLR network evolution and its impact on the terrestrial reference frame

Science.gov (United States)

Kehm, Alexander; Bloßfeld, Mathis; Pavlis, Erricos C.; Seitz, Florian

2018-06-01

Satellite laser ranging (SLR) is an important technique that contributes to the determination of terrestrial geodetic reference frames, especially to the realization of the origin and the scale of global networks. One of the major limiting factors of SLR-derived reference frame realizations is the datum accuracy which significantly suffers from the current global SLR station distribution. In this paper, the impact of a potential future development of the SLR network on the estimated datum parameters is investigated. The current status of the SLR network is compared to a simulated potential future network featuring additional stations improving the global network geometry. In addition, possible technical advancements resulting in a higher amount of observations are taken into account as well. As a result, we find that the network improvement causes a decrease in the scatter of the network translation parameters of up to 24%, and up to 20% for the scale, whereas the technological improvement causes a reduction in the scatter of up to 27% for the translations and up to 49% for the scale. The Earth orientation parameters benefit by up to 15% from both effects.

Experimental research on specific activity of 24Na using Chinese reference man phantom irradiated by 252Cf neutrons source

International Nuclear Information System (INIS)

Wang Yuexing; Yang Yifang; Lu Yongjie; Zhang Jianguo; Xing Hongchuan

2011-01-01

Objective: To investigate the specific activity of '2 4 Na per unit neutron fluence, A B/Φ ,in blood produced for Chinese reference man irradiated by 252 Cf neutron source,and to analyze the effects of scattering neutrons from ground,wall,and ceiling in irradiation site on it.Methods: A 252 Cf neutron source of 3×10 8 n/s and the anthropomorphic phantom were used for experiments. The phantom was made from 4 mm thick of outer covering by perspex and the liquid tissue-equivalent substitute in it. The data of phantom dimensions fit into Chinese reference man.The weight ratios of H, N, O and C in substitute equal from source to long axis of phantom were 1.1, 2.1, 3.1 and 4.1 m, respectively. Both the neutron source and the position of xiphisternum of the phantom were 1.6 m above the floor. Results: The average specific activity of 24 Na per unit neutron fluence was related to the irradiation-distances, d, and its maximum value, A B/ΦM , deduced by experimental data was about 1.85×10 -7 Bq·cm 2 ·g -1 . Conclusions: The A B/ΦM corresponds to that of phantom irradiated by plane-parallel beams, and the value is about more 3% than that by BOMAB phantom reported in literature. It has shown that floor-(wall-)scattered neutrons in irradiation site have significant contribution to the specific activity of 24 Na, but they contributed relatively little to the induced neutron doses. Consequently,using the specific activity of 24 Na for assessing accidental neutron doses received by an individual, the contribution of scattered neutrons in accident site will lead dose to be overestimated, and need to be correct. (authors)

The assessment of the transformation of global tectonic plate models and the global terrestrial reference frames using the Velocity Decomposition Analysis

Science.gov (United States)

Ampatzidis, Dimitrios; König, Rolf; Glaser, Susanne; Heinkelmann, Robert; Schuh, Harald; Flechtner, Frank; Nilsson, Tobias

2016-04-01

The aim of our study is to assess the classical Helmert similarity transformation using the Velocity Decomposition Analysis (VEDA). The VEDA is a new methodology, developed by GFZ for the assessment of the reference frames' temporal variation and it is based on the separation of the velocities into two specified parts: The first is related to the reference system choice (the so called datum effect) and the latter one which refers to the real deformation of the terrestrial points. The advantage of the VEDA is its ability to detect the relative biases and reference system effects between two different frames or two different realizations of the same frame, respectively. We apply the VEDA for the assessment between several modern tectonic plate models and the recent global terrestrial reference frames.

A global reference for caesarean section rates (C-Model): a multicountry cross-sectional study.

Science.gov (United States)

Souza, J P; Betran, A P; Dumont, A; de Mucio, B; Gibbs Pickens, C M; Deneux-Tharaux, C; Ortiz-Panozo, E; Sullivan, E; Ota, E; Togoobaatar, G; Carroli, G; Knight, H; Zhang, J; Cecatti, J G; Vogel, J P; Jayaratne, K; Leal, M C; Gissler, M; Morisaki, N; Lack, N; Oladapo, O T; Tunçalp, Ö; Lumbiganon, P; Mori, R; Quintana, S; Costa Passos, A D; Marcolin, A C; Zongo, A; Blondel, B; Hernández, B; Hogue, C J; Prunet, C; Landman, C; Ochir, C; Cuesta, C; Pileggi-Castro, C; Walker, D; Alves, D; Abalos, E; Moises, Ecd; Vieira, E M; Duarte, G; Perdona, G; Gurol-Urganci, I; Takahiko, K; Moscovici, L; Campodonico, L; Oliveira-Ciabati, L; Laopaiboon, M; Danansuriya, M; Nakamura-Pereira, M; Costa, M L; Torloni, M R; Kramer, M R; Borges, P; Olkhanud, P B; Pérez-Cuevas, R; Agampodi, S B; Mittal, S; Serruya, S; Bataglia, V; Li, Z; Temmerman, M; Gülmezoglu, A M

2016-02-01

To generate a global reference for caesarean section (CS) rates at health facilities. Cross-sectional study. Health facilities from 43 countries. Thirty eight thousand three hundred and twenty-four women giving birth from 22 countries for model building and 10,045,875 women giving birth from 43 countries for model testing. We hypothesised that mathematical models could determine the relationship between clinical-obstetric characteristics and CS. These models generated probabilities of CS that could be compared with the observed CS rates. We devised a three-step approach to generate the global benchmark of CS rates at health facilities: creation of a multi-country reference population, building mathematical models, and testing these models. Area under the ROC curves, diagnostic odds ratio, expected CS rate, observed CS rate. According to the different versions of the model, areas under the ROC curves suggested a good discriminatory capacity of C-Model, with summary estimates ranging from 0.832 to 0.844. The C-Model was able to generate expected CS rates adjusted for the case-mix of the obstetric population. We have also prepared an e-calculator to facilitate use of C-Model (www.who.int/reproductivehealth/publications/maternal_perinatal_health/c-model/en/). This article describes the development of a global reference for CS rates. Based on maternal characteristics, this tool was able to generate an individualised expected CS rate for health facilities or groups of health facilities. With C-Model, obstetric teams, health system managers, health facilities, health insurance companies, and governments can produce a customised reference CS rate for assessing use (and overuse) of CS. The C-Model provides a customized benchmark for caesarean section rates in health facilities and systems. © 2015 World Health Organization; licensed by John Wiley & Sons Ltd on behalf of Royal College of Obstetricians and Gynaecologists.

A Global Moving Hotspot Reference Frame: How well it fits?

Science.gov (United States)

Doubrovine, P. V.; Steinberger, B.; Torsvik, T. H.

2010-12-01

Since the early 1970s, when Jason Morgan proposed that hotspot tracks record motion of lithosphere over deep-seated mantle plumes, the concept of fixed hotspots has dominated the way we think about absolute plate reconstructions. In the last decade, with compelling evidence for southward drift of the Hawaiian hotspot from paleomagnetic studies, and for the relative motion between the Pacific and Indo-Atlantic hotspots from refined plate circuit reconstructions, the perception changed and a global moving hotspot reference frame (GMHRF) was introduced, in which numerical models of mantle convection and advection of plume conduits in the mantle flow were used to estimate hotspot motion. This reference frame showed qualitatively better performance in fitting hotspot tracks globally, but the error analysis and formal estimates of the goodness of fitted rotations were lacking in this model. Here we present a new generation of the GMHRF, in which updated plate circuit reconstructions and radiometric age data from the hotspot tracks were combined with numerical models of plume motion, and uncertainties of absolute plate rotations were estimated through spherical regression analysis. The overall quality of fit was evaluated using a formal statistical test, by comparing misfits produced by the model with uncertainties assigned to the data. Alternative plate circuit models linking the Pacific plate to the plates of Indo-Atlantic hemisphere were tested and compared to the fixed hotspot models with identical error budgets. Our results show that, with an appropriate choice of the Pacific plate circuit, it is possible to reconcile relative plate motions and modeled motions of mantle plumes globally back to Late Cretaceous time (80 Ma). In contrast, all fixed hotspot models failed to produce acceptable fits for Paleogene to Late Cretaceous time (30-80 Ma), highlighting significance of relative motion between the Pacific and Indo-Atlantic hotspots during this interval. The

Facts about food irradiation: Microbiological safety of irradiated food

International Nuclear Information System (INIS)

1991-01-01

This fact sheet considers the microbiological safety of irradiated food, with especial reference to Clostridium botulinum. Irradiated food, as food treated by any ''sub-sterilizing'' process, must be handled, packaged and stored following good manufacturing practices to prevent growth and toxin production of C. botulinum. Food irradiation does not lead to increased microbiological hazards, nor can it be used to save already spoiled foods. 4 refs

Early ultrastructural changes in the dorsal mucosa of rat tongue after irradiation, with special reference to the microvasculature

International Nuclear Information System (INIS)

Obinata, Ken-ichi; Ohshima, Hayato; Ito, Jusuke; Takano, Yoshiro.

1997-01-01

To clarify the acute effects of irradiation on the ultrastructural conformation of the dorsal mucosa of the rat tongue, with special reference to the changes in microvasculature. The proboscis of seventy rats were irradiated. The animals were then perfusion-fixed, followed by India ink-injection or resin casting at 3 to 7 days after irradiation. The bulk, frozen sections, or plastic embedded sections of the treated rat tongues were examined by light and electron microscopy. In the dorsal epithelium of the rat tongue, multi-nucleated cells appeared in the basal layer at 3 days after irradiation. At day 5, the thickness of the epithelial layer and connective tissue papillae decreased dramatically, concomitant with the shortening of the capillary loops. At day 7, lingual papillae and connective tissue papillae disappeared, leaving dissociated epithelial cells and numerous neutrophils migrating throughout the tissue. Subepithelial blood vessels displayed drastic dilation with a number of neutrophils adhering to the endothelial surface, but without ultrastructural abnormalities in its cellular components. Early changes in the dorsal mucosa of the irradiated rat tongue were limited to the basal epithelial cells, leading to a total disruption of the epithelial layer. Atrophic changes of the capillary loops is due to the loss of the connective tissue papillae. Dilation and conformational changes of the subepithelial capillaries appear to result from the inflammatory reaction, taking place secondarily to the loss of the epithelial barrier of the irradiated tongue. A difference in radiosensitivity among the epithelial, endothelial, and mesenchymal cell components of the rat tongue in vivo is suggested. (author)

A global reference database of crowdsourced cropland data collected using the Geo-Wiki platform

NARCIS (Netherlands)

Laso Bayas, JC; Lesiv, M; Waldner, F; Schucknecht, A; Duerauer, M; See, L; Fritz, S.; Fraisl, D; Moorthy, I; McCallum, I.; Perger, C; Danylo, O; Defourny, P; Gallego, J; Gilliams, S; Akhtar, I.H.; Baishya, S. J.; Baruah, M; Bungnamei, K; Campos, A; Changkakati, T; Cipriani, A; Das, Krishna; Das, Keemee; Das, I; Davis, K.F.; Hazarika, P; Johnson, B.A.; Malek, Ziga; Molinari, M.E.; Panging, K; Pawe, C.K.; Pérez-Hoyos, A; Sahariah, P.K.; Sahariah, D; Saikia, A; Saikia, M; Schlesinger, Peter; Seidacaru, E; Singha, K; Wilson, John W

2017-01-01

A global reference data set on cropland was collected through a crowdsourcing campaign using the Geo-Wiki crowdsourcing tool. The campaign lasted three weeks, with over 80 participants from around the world reviewing almost 36,000 sample units, focussing on cropland identification. For quality

Global Vertical Reference Frame

Czech Academy of Sciences Publication Activity Database

Burša, Milan; Kenyon, S.; Kouba, J.; Šíma, Zdislav; Vatrt, V.; Vojtíšková, M.

2004-01-01

Roč. 33, - (2004), s. 404-407 ISSN 1436-3445 Institutional research plan: CEZ:AV0Z1003909 Keywords : geopotential WO * vertical systems * global vertical frame Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics

A frequency domain global parameter estimation method for multiple reference frequency response measurements

Science.gov (United States)

Shih, C. Y.; Tsuei, Y. G.; Allemang, R. J.; Brown, D. L.

1988-10-01

A method of using the matrix Auto-Regressive Moving Average (ARMA) model in the Laplace domain for multiple-reference global parameter identification is presented. This method is particularly applicable to the area of modal analysis where high modal density exists. The method is also applicable when multiple reference frequency response functions are used to characterise linear systems. In order to facilitate the mathematical solution, the Forsythe orthogonal polynomial is used to reduce the ill-conditioning of the formulated equations and to decouple the normal matrix into two reduced matrix blocks. A Complex Mode Indicator Function (CMIF) is introduced, which can be used to determine the proper order of the rational polynomials.

Statistical analysis of global horizontal solar irradiation GHI in Fez city, Morocco

Science.gov (United States)

Bounoua, Z.; Mechaqrane, A.

2018-05-01

An accurate knowledge of the solar energy reaching the ground is necessary for sizing and optimizing the performances of solar installations. This paper describes a statistical analysis of the global horizontal solar irradiation (GHI) at Fez city, Morocco. For better reliability, we have first applied a set of check procedures to test the quality of hourly GHI measurements. We then eliminate the erroneous values which are generally due to measurement or the cosine effect errors. Statistical analysis show that the annual mean daily values of GHI is of approximately 5 kWh/m²/day. Daily monthly mean values and other parameter are also calculated.

A comparison of the Angstrom-type correlations and the estimation of monthly average daily global irradiation

International Nuclear Information System (INIS)

Jain, S.; Jain, P.C.

1985-12-01

Linear regression analysis of the monthly average daily global irradiation and the sunshine duration data of 8 Zambian locations has been performed using the least square technique. Good correlation (r>0.95) is obtained in all the cases showing that the Angstrom equation is valid for Zambian locations. The values of the correlation parameters thus obtained show substantial unsystematic scatter. The analysis was repeated after incorporating the effects of (i) multiple reflections of radiation between the ground and the atmosphere, and (ii) not burning of the sunshine recorder chart, into the Angstrom equation. The surface albedo measurements at Lusaka were used. The scatter in the correlation parameters was investigated by graphical representation, by regression analysis of the data of the individual stations as well as the combined data of the 8 stations. The results show that the incorporation of none of the two effects reduces the scatter significantly. A single linear equation obtained from the regression analysis of the combined data of the 8 stations is found to be appropriate for estimating the global irradiation over Zambian locations with reasonable accuracy from the sunshine duration data. (author)

Food irradiation

Energy Technology Data Exchange (ETDEWEB)

Gruenewald, T

1985-01-01

Food irradiation has become a matter of topical interest also in the Federal Republic of Germany following applications for exemptions concerning irradiation tests of spices. After risks to human health by irradiation doses up to a level sufficient for product pasteurization were excluded, irradiation now offers a method suitable primarily for the disinfestation of fruit and decontamination of frozen and dried food. Codex Alimentarius standards which refer also to supervision and dosimetry have been established; they should be adopted as national law. However, in the majority of cases where individual countries including EC member-countries so far permitted food irradiation, these standards were not yet used. Approved irradiation technique for industrial use is available. Several industrial food irradiation plants, partly working also on a contractual basis, are already in operation in various countries. Consumer response still is largely unknown; since irradiated food is labelled, consumption of irradiated food will be decided upon by consumers.

Official ERS technical standards: Global Lung Function Initiative reference values for the carbon monoxide transfer factor for Caucasians.

Science.gov (United States)

Stanojevic, Sanja; Graham, Brian L; Cooper, Brendan G; Thompson, Bruce R; Carter, Kim W; Francis, Richard W; Hall, Graham L

2017-09-01

There are numerous reference equations available for the single-breath transfer factor of the lung for carbon monoxide ( T  LCO ); however, it is not always clear which reference set should be used in clinical practice. The aim of the study was to develop the Global Lung Function Initiative (GLI) all-age reference values for T  LCO Data from 19 centres in 14 countries were collected to define T  LCO reference values. Similar to the GLI spirometry project, reference values were derived using the LMS (lambda, mu, sigma) method and the GAMLSS (generalised additive models for location, scale and shape) programme in R.12 660 T  LCO measurements from asymptomatic, lifetime nonsmokers were submitted; 85% of the submitted data were from Caucasians. All data were uncorrected for haemoglobin concentration. Following adjustments for elevation above sea level, gas concentration and assumptions used for calculating the anatomic dead space volume, there was a high degree of overlap between the datasets. Reference values for Caucasians aged 5-85 years were derived for T  LCO , transfer coefficient of the lung for carbon monoxide and alveolar volume.This is the largest collection of normative T  LCO data, and the first global reference values available for T  LCO . Copyright ©ERS 2017.

A Comparison Between Heliosat-2 and Artificial Neural Network Methods for Global Horizontal Irradiance Retrievals over Desert Environments

Science.gov (United States)

Ghedira, H.; Eissa, Y.

2012-12-01

Global horizontal irradiance (GHI) retrievals at the surface of any given location could be used for preliminary solar resource assessments. More accurately, the direct normal irradiance (DNI) and diffuse horizontal irradiance (DHI) are also required to estimate the global tilt irradiance, mainly used for fixed flat plate collectors. Two different satellite-based models for solar irradiance retrievals have been applied over the desert environment of the United Arab Emirates (UAE). Both models employ channels of the SEVIRI instrument, onboard the geostationary satellite Meteosat Second Generation, as their main inputs. The satellite images used in this study have a temporal resolution of 15-min and a spatial resolution of 3-km. The objective of this study is to compare between the GHI retrieved using the Heliosat-2 method and an artificial neural network (ANN) ensemble method over the UAE. The high-resolution visible channel of SEVIRI is used in the Heliosat-2 method to derive the cloud index. The cloud index is then used to compute the cloud transmission, while the cloud-free GHI is computed from the Linke turbidity factor. The product of the cloud transmission and the cloud-free GHI denotes the estimated GHI. A constant underestimation is observed in the estimated GHI over the dataset available in the UAE. Therefore, the cloud-free DHI equation in the model was recalibrated to fix the bias. After recalibration, results over the UAE show a root mean square error (RMSE) value of 10.1% and a mean bias error (MBE) of -0.5%. As for the ANN approach, six thermal channels of SEVIRI were used to estimate the DHI and the total optical depth of the atmosphere (δ). An ensemble approach is employed to obtain a better generalizability of the results, as opposed to using one single weak network. The DNI is then computed from the estimated δ using the Beer-Bouguer-Lambert law. The GHI is computed from the DNI and DHI estimates. The RMSE for the estimated GHI obtained over an

Global Area Reference System (GARS), 30-minute Blocks for Louisiana, WGS84, NGA (2007) [gars_la_30min_nga_2007

Data.gov (United States)

Louisiana Geographic Information Center — Global Area Reference System (GARS) is developed by the National Geospatial-Intelligence Agency (NGA) as an area reference system. GARS is based on lines of...

OMI/Aura Surface UVB Irradiance and Erythemal Dose Daily L2 Global 0.25 deg Lat/Lon Grid V003

Data.gov (United States)

National Aeronautics and Space Administration — The Version 003 of Aura-OMI Spectral Surface UVB Irradiance and Erythemal Dose Level-2G data product (Daily level-2 data binned into global 0.25 deg Lat/Lon grids)...

INAA study of Hg, Se, As, and Br irradiation losses from l-cysteine treated and untreated reference materials

International Nuclear Information System (INIS)

Anderson, D.L.

2013-01-01

U. S. Food and Drug Administration in-house reference material (RM) Cocoa Powder and National Institute of Standards and Technology Standard RMs (SRMs) 1515 apple leaves, 1547 peach leaves, 1571 orchard leaves, 1566a oyster tissue, and 1568a rice flour were co-irradiated together with polyethylene blanks and analyzed for Hg and Se by anticoincidence instrumental neutron activation analysis. The three botanical SRM portions showed a combined Hg recovery of 70 % while the other portions showed a combined Hg recovery of 169 %, indicating that volatile Hg was lost from botanical SRMs and absorbed by the other irradiated portions. Total Hg recovery for all portions was 82 %. Se results showed no evidence of cross-contamination and all results agreed with certified and known values. National Research Council of Canada Certified RMs DOLT-3 dogfish liver, TORT-2 lobster hepatopancreas, and DORM-3 fish protein were separately analyzed either with no treatment or after treatment with l-cysteine solutions followed by drying over magnesium perchlorate. Each set of portions was co-irradiated with polyethylene and treated filter blanks. Analysis of all components of each treated portion irradiation package showed that essentially all Hg was retained within the package. Treated DOLT-3 portions (inorganic Hg content 53 %) showed a tenfold improvement with 99 % Hg retention. Hg retention for DORM-3 (7 % inorganic Hg) was 85 % (a twofold improvement) while retention for TORT-2 (44 % inorganic Hg), was 94 %, similar to that for untreated portions (96 %). Small irradiation losses (≤0.5 %) of volatile species of Se, As, and Br were observed. (author)

Analysis of solar irradiation measurements at Beer Sheva, Israel from 1985 through 2013

International Nuclear Information System (INIS)

Evseev, Efim G.; Kudish, Avraham I.

2015-01-01

Highlights: • In depth analysis of long-term solar irradiation at Beer Sheva, Israel. • Construction of a typical meteorological year for global and beam irradiation. • Statistical analysis of the global and beam irradiation. • Analysis of long-term trends regarding global and beam irradiation. - Abstract: An in-depth analysis of the solar horizontal global, normal incidence beam and solar global incident on a south-facing surface tilted at 40° irradiation monitored at Beer Sheva from 1985 through 2013 has been performed. The horizontal beam irradiation, daily clearness index, daily beam index and beam fraction of the horizontal global irradiation were determined from the measured parameters. A statistical analysis, which included average, median, standard deviation, maximum and minimum values and the coefficient of variation, was performed on the parameters under investigation. The monthly frequency distribution types were determined for the solar global, normal incidence beam and solar global incident on a south-facing surface tilted at 40° irradiation based upon their corresponding skewness and kurtosis values. In addition, typical meteorological years were developed for the solar horizontal global and normal incidence beam irradiation. Beer Sheva is characterized as a site with a high incidence of clear days with global irradiation consisting of a relatively high beam fraction. A relatively steep minimum in the annual average daily normal incidence beam irradiation is observed from 1991 to 1993 and has been attributed to the eruption of Mt. Pinatubo, Philippines during June 1991. A time series analysis of the both individual monthly and annual average daily global and normal incidence irradiation indicated a slight trend of solar brightening for this region during the time interval 1985 through 2013, but in most cases they were not statistically significant based upon their p values

Irradiation proctitis

International Nuclear Information System (INIS)

Minami, Akira

1977-01-01

Literatures on late rectal injuries are discussed, referring to two patients with uterine cervical cancer in whom irradiation proctitis occurred after telecobalt irradiation following uterine extirpation. To one patients, a total of 5000 rads was irradiated, dividing into 250 rads at one time, and after 3 months, irradiation with a total of 2000 rads, dividing into 200 rads at one time, was further given. In another one patient, two parallel opposing portal irradiation with a total of 6000 rads was given. About a year after the irradiation, rectal injuries and cystitis, accompanying with hemorrhage, were found in both of the patients. Rectal amputation and proctotoreusis were performed. Cystitis was treated by cystic irradiation in the urological department. Pathohistological studies of the rectal specimen revealed atrophic mucosa, and dilatation of the blood vessels and edema in the colonic submucosa. Incidence of this disease, term when the disease occurs, irradiation dose, type of the disease, treatment and prevention are described on the basis of the literatures. (Kanao, N.)

Irradiation proctitis

Energy Technology Data Exchange (ETDEWEB)

Minami, A [Osaka Kita Tsishin Hospital (Japan)

1977-06-01

Literatures on late rectal injuries are discussed, referring to two patients with uterine cervical cancer in whom irradiation proctitis occurred after telecobalt irradiation following uterine extirpation. To one patients, a total of 5000 rads was irradiated, dividing into 250 rads at one time, and after 3 months, irradiation with a total of 2000 rads, dividing into 200 rads at one time, was further given. In another one patient, two parallel opposing portal irradiation with a total of 6000 rads was given. About a year after the irradiation, rectal injuries and cystitis, accompanying with hemorrhage, were found in both of the patients. Rectal amputation and proctotoreusis were performed. Cystitis was treated by cystic irradiation in the urological department. Pathohistological studies of the rectal specimen revealed atrophic mucosa, and dilatation of the blood vessels and edema in the colonic submucosa. Incidence of this disease, term when the disease occurs, irradiation dose, type of the disease, treatment and prevention are described on the basis of the literatures.

Verification of ECMWF and ECMWF/MACC's global and direct irradiance forecasts with respect to solar electricity production forecasts

Directory of Open Access Journals (Sweden)

M. Schroedter-Homscheidt

2017-02-01

Full Text Available The successful electricity grid integration of solar energy into day-ahead markets requires at least hourly resolved 48 h forecasts. Technologies as photovoltaics and non-concentrating solar thermal technologies make use of global horizontal irradiance (GHI forecasts, while all concentrating technologies both from the photovoltaic and the thermal sector require direct normal irradiances (DNI. The European Centre for Medium-Range Weather Forecasts (ECMWF has recently changed towards providing direct as well as global irradiances. Additionally, the MACC (Monitoring Atmospheric Composition & Climate near-real time services provide daily analysis and forecasts of aerosol properties in preparation of the upcoming European Copernicus programme. The operational ECMWF/IFS (Integrated Forecast System forecast system will in the medium term profit from the Copernicus service aerosol forecasts. Therefore, within the MACC‑II project specific experiment runs were performed allowing for the assessment of the performance gain of these potential future capabilities. Also the potential impact of providing forecasts with hourly output resolution compared to three-hourly resolved forecasts is investigated. The inclusion of the new aerosol climatology in October 2003 improved both the GHI and DNI forecasts remarkably, while the change towards a new radiation scheme in 2007 only had minor and partly even unfavourable impacts on the performance indicators. For GHI, larger RMSE (root mean square error values are found for broken/overcast conditions than for scattered cloud fields. For DNI, the findings are opposite with larger RMSE values for scattered clouds compared to overcast/broken cloud situations. The introduction of direct irradiances as an output parameter in the operational IFS version has not resulted in a general performance improvement with respect to biases and RMSE compared to the widely used Skartveit et al. (1998 global to direct irradiance

Stimulation of seeds by low dose irradiation

International Nuclear Information System (INIS)

Lawson, Helen

1976-05-01

The first section of the bibliography lists materials on the stimulation of seeds by low dose irradiation, with particular reference to stimulation of germination and yield. The second section contains a small number of selected references on seed irradiation facilities. (author)

Food irradiation

International Nuclear Information System (INIS)

Matsuyama, Akira

1990-01-01

This paper reviews researches, commentaries, and conference and public records of food irradiation, published mainly during the period 1987-1989, focusing on the current conditions of food irradiation that may pose not only scientific or technologic problems but also political issues or consumerism. Approximately 50 kinds of food, although not enough to fill economic benefit, are now permitted for food irradiation in the world. Consumerism is pointed out as the major factor that precludes the feasibility of food irradiation in the world. In the United States, irradiation is feasible only for spices. Food irradiation has already been feasible in France, Hollands, Belgium, and the Soviet Union; has under consideration in the Great Britain, and has been rejected in the West Germany. Although the feasibility of food irradiation is projected to increase gradually in the future, commercial success or failure depends on the final selection of consumers. In this respect, the role of education and public information are stressed. Meat radicidation and recent progress in the method for detecting irradiated food are referred to. (N.K.) 128 refs

Study on irradiation treatment to drunk crab

International Nuclear Information System (INIS)

Cao Hong; Chen Xiulan; Zhai Jianqing; Bao Jianzhong; Wang Jinrong

2002-01-01

For guaranteeing the quality of irradiated drunk crab, manufacture method of the dosimeter, sample setting and taking position, irradiation time, asymmetry degree of irradiation dose, contrast of the dosimeter are discussed and some reference datum to commercialization of drunk crab's irradiation are provided

Regulatory aspect of food irradiation

International Nuclear Information System (INIS)

Harrison Aziz

1985-01-01

Interest in the process of food irradiation is reviewed once again internationally. Although food irradiation has been thoroughly investigated, global acceptance is still lacking. Factors which impede the progress of the technology are discussed here. (author)

Food preservation by irradiation

International Nuclear Information System (INIS)

Labots, H.; Huis in 't Veld, G.J.P.; Verrips, C.T.

1985-01-01

After a review of several methods for the preservation of food and the routes of food infections, the following chapters are devoted to the preservation by irradiation. Applications and legal aspects of food irradiation are described. Special reference is made to the international situation. (Auth.)

Vanderbilt University Gamma Irradiation of Nano-modified Concrete (2017 Milestone Report)

Energy Technology Data Exchange (ETDEWEB)

Deichert, Geoffrey G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Linton, Kory D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Terrani, Kurt A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Selby, Aaron P. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Reches, Yonathan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-08-01

This document outlines the irradiation of concrete specimens in the Gamma Irradiation Facility in the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL). Two gamma irradiation runs were performed in July of 2017 on 18 reference mortar bar specimens, 26 reference cement paste bar specimens, and 28 reference cement paste tab specimens to determine the dose and temperature response of the specimens in the gamma irradiation environment. Specimens from the first two gamma irradiations were surveyed and released to Vanderbilt University. The temperature and dose information obtained informs the test parameters of the final two gamma irradiations of nano-modified concrete planned for FY 2018.

Irradiação global, direta e difusa, para a região de Cascavel, Estado do Paraná = Global, direct and diffuse irradiation in the region of Cascavel, Paraná State

Directory of Open Access Journals (Sweden)

Patricia Aparecida de Oliveira Drechmer

2006-01-01

Full Text Available O presente trabalho apresenta um estudo sobre os níveis das irradiações global, direta e difusa incidentes na superfície terrestre, a irradiação incidente no topo da atmosfera e a insolação relativa mensal, para a cidade de Cascavel-PR. As componentes da radiação solar foram monitoradas entre janeiro de 2001 e fevereiro de 2003 na Estação Experimental Agrometeorológica da Unioeste, Cascavel, Estado do Paraná. Na medição da radiação global foi utilizado um piranômetro KIPP & ZONEN-CM3 e para medir a componente direta foiutilizado um pireliômetro EPPLEY-NIP acoplado a um rastreador solar. A radiação difusa foi calculada pela diferença entre as radiações global e direta. Os níveis médios mensais das irradiações global, direta e difusa, foram respectivamente, 51,8%, 31,7% e 20,17% dairradiação incidente no topo da atmosfera. O índice de insolação relativa apresentou valor máximo em agosto (61,43% e mínimo em fevereiro (34,35%, períodos caracterizados respectivamente por dias de céu limpo e nublados no hemisfério sul.This paper reports a study about the diffuse, direct and global radiation levels on surface of earth, the irradiation over the top of atmosphere and the monthly relative sunstroke in the city of Cascavel, State of Paraná, southern Brazil. The solar radiation components were monitored from January, 2001 to February, 2003 at Estação Experimental Agrometeorológica of Unioeste, Cascavel, Parana State. Global radiation was monitored by a pyranometer KIPP & ZONEN-CM3 and direct radiation was monitored by a pyrheliometer EPPLEY-NIP coupled to a solar tracer. The diffuse radiation wasmonitored through the difference between global and direct radiation. Monthly average levels of global, direct and diffuse irradiations were 51.8%, 31.7% and 20.17% of the irradiation in the top of atmosphere. The relative isolation index showed the maximum value in August (61.43% and the minimum in February (34.35%. These

Uncertainty Analysis of Spectral Irradiance Reference Standards Used for NREL Calibrations

Energy Technology Data Exchange (ETDEWEB)

Habte, A.; Andreas, A.; Reda, I.; Campanelli, M.; Stoffel, T.

2013-05-01

Spectral irradiance produced by lamp standards such as the National Institute of Standards and Technology (NIST) FEL-type tungsten halogen lamps are used to calibrate spectroradiometers at the National Renewable Energy Laboratory. Spectroradiometers are often used to characterize spectral irradiance of solar simulators, which in turn are used to characterize photovoltaic device performance, e.g., power output and spectral response. Therefore, quantifying the calibration uncertainty of spectroradiometers is critical to understanding photovoltaic system performance. In this study, we attempted to reproduce the NIST-reported input variables, including the calibration uncertainty in spectral irradiance for a standard NIST lamp, and quantify uncertainty for measurement setup at the Optical Metrology Laboratory at the National Renewable Energy Laboratory.

e-Learning Course on Food Irradiation

International Nuclear Information System (INIS)

Hénon, Yves

2016-01-01

Since May 2015, an online, interactive, multi-media and self-study course on Food Irradiation - Technology, Applications and Good Practices has been made available by the Food and Environmental Protection Section. This e-learning Course on Food Irradiation was initiated during a project (RAS/05/057) of the Regional Cooperative Agreement (RCA) Implementing Best Practices of Food Irradiation for Sanitary and Phytosanitary Purposes. Each module contains: • A lesson, largely based on the Manual of Good Practice in Food except for the first part (Food Irradiation) for which expanding the contents and addressing frequently asked questions seemed necessary. The latest chapters will help operators of irradiation facilities to appreciate and improve their practices. • A section called ‘Essentials’ that summarizes the key points. • A quiz to assess the knowledge acquired by the user from the course material. The quiz questions take a variety of forms: answer matching, multiple choice, true or false, picture selection, or simple calculation. Videos, Power Point presentations, pdf files and pictures enrich the contents. The course includes a glossary and approximately 80 downloadable references. These references cover safety of irradiated food, effects of irradiation on the nutritional quality of food, effects of irradiation on food microorganisms, insects and parasites, effects of irradiation on parasites, sanitary and phytosanitary applications of irradiation, packaging of irradiated food, food irradiation standards and regulations, history of food irradiation, and communication aspects.

Effect of reference loads on fracture mechanics analysis of surface cracked pipe based on reference stress method

International Nuclear Information System (INIS)

Shim, Do Jun; Son, Beom Goo; Kim, Young Jin; Kim, Yun Jae

2004-01-01

To investigate relevance of the definition of the reference stress to estimate J and C * for surface crack problems, this paper compares FE J and C * results for surface cracked pipes with those estimated according to the reference stress approach using various definitions of the reference stress. Pipes with part circumferential inner surface crack and finite internal axial crack are considered, subject to internal pressure and global bending. The crack depth and aspect ratio are systematically varied. The reference stress is defined in four different ways using (I) the local limit load, (II) the global limit load, (III) the global limit load determined from the FE limit analysis, and (IV) the optimised reference load. It is found that the reference stress based on the local limit load gives overall excessively conservative estimates of J and C * . Use of the global limit load clearly reduces the conservatism, compared to that of the local limit load, although it can provide sometimes non-conservative estimates of J and C * . The use of the FE global limit load gives overall non-conservative estimates of J and C * . The reference stress based on the optimised reference load gives overall accurate estimates of J and C * , compared to other definitions of the reference stress. Based on the present finding, general guidance on the choice of the reference stress for surface crack problems is given

On the Assessment of Global Terrestrial Reference Frame Temporal Variations

Science.gov (United States)

Ampatzidis, Dimitrios; Koenig, Rolf; Zhu, Shengyuan

2015-04-01

Global Terrestrial Reference Frames (GTRFs) as the International Terrestrial Reference Frame (ITRF) provide reliable 4-D position information (3-D coordinates and their evolution through time). The given 3-D velocities play a significant role in precise position acquisition and are estimated from long term coordinate time series from the space-geodetic techniques DORIS, GNSS, SLR, and VLBI. GTRFs temporal evolution is directly connected with their internal stability: The more intense and inhomogeneous velocity field, the less stable TRF is derived. The assessment of the quality of the GTRF is mainly realized by comparing it to each individual technique's reference frame. E.g the comparison of GTRFs to SLR-only based TRF gives the sense of the ITRF stability with respect to the Geocenter and scale and their associated rates respectively. In addition, the comparison of ITRF to the VLBI-only based TRF can be used for the scale validation. However, till now there is not any specified methodology for the total assessment (in terms of origin, orientation and scale respectively) of the temporal evolution and GTRFs associated accuracy. We present a new alternative diagnostic tool for the assessment of GTRFs temporal evolution based on the well-known time-dependent Helmert type transformation formula (three shifts, three rotations and scale rates respectively). The advantage of the new methodology relies on the fact that it uses the full velocity field of the TRF and therefore all points not just the ones common to different techniques. It also examines simultaneously rates of origin, orientation and scale. The methodology is presented and implemented to the two existing GTRFs on the market (ITRF and DTRF which is computed from DGFI) , the results are discussed. The results also allow to compare directly each GTRF dynamic behavior. Furthermore, the correlations of the estimated parameters can also provide useful information to the proposed GTRFs assessment scheme.

Design of a sun tracker for the automatic measurement of spectral irradiance and construction of an irradiance database in the 330-1100 nm range

Energy Technology Data Exchange (ETDEWEB)

Canada, J.; Maj, A. [Departamento de Termodinamica Aplicada, Universidad Politecnica de Valencia, Camino de Vera, s/n. 46022 Valencia (Spain); Utrillas, M.P.; Martinez-Lozano, J.A.; Pedros, R.; Gomez-Amo, J.L. [Departamento de Fisica de la Tierra y Termodinamica, Facultat de Fisica, Universitat de Valencia, 46100 Burjassot (Valencia) (Spain)

2007-10-15

An automatic global and direct solar spectral irradiance system has been designed based on two LICOR spectro radiometers equipped with fibre optics and remote cosine sensors. To measure direct irradiance a sun tracker based on step motors has been developed. The whole system is autonomous and works continuously. From the measurements provided by this system a spectral irradiance database in the 330-1100 nm range has been created. This database contains normal direct and global horizontal irradiances as well as diffuse irradiance on a horizontal plane, together with total atmospheric optical thickness and aerosol optical depth. (author)

Irradiation device using radiation sources

International Nuclear Information System (INIS)

Perraudin, Claude; Amarge, Edmond; Guiho, J.-P.; Horiot, J.-C.; Taniel, Gerard; Viel, Georges; Brethon, J.-P.

1981-01-01

The invention refers to an irradiation appliance making use of radioactive sources such as cobalt 60. This invention concerns an irradiation appliance delivering an easily adjustable irradiation beam in accurate dimensions and enabling the radioactive sources to be changed without making use of intricate manipulations at the very place where the appliance has to be used. This kind of appliance is employed in radiotherapy [fr

Enhanced solar global irradiance during cloudy sky conditions

Energy Technology Data Exchange (ETDEWEB)

Schade, N.H.; Sandmann, H.; Stick, C. [Kiel Univ. (Germany). Inst. fuer Medizinische Klimatologie; Macke, A. [Kiel Univ. (DE). Leibniz Inst. fuer Meereswissenschaften (IFM-GEOMAR)

2007-06-15

The impact of cloudiness on the shortwave downwelling radiation (SDR) at the surface is investigated by means of collocated pyranometer radiation measurements and all-sky imager observations. The measurements have been performed in Westerland, a seaside resort on the North Sea island of Sylt, Germany, during summer 2004 and 2005. A main improvement to previous studies on this subject resulted from the very high temporal resolution of cloud images and radiation measurements and, therefore, a more robust statistical analysis of the occurrence of this effect. It was possible to observe an excess of solar irradiation compared to clear sky irradiation by more than 500 W/m{sup 2}, the largest observed excess irradiation to our knowledge so far. Camera images reveal that largest excess radiation is reached close to overcast situations with altocumulus clouds partly obscuring the solar disk, and preferably with cumulus clouds in lower levels. The maximum duration of the enhancements depends on its strength and ranges from 20 seconds (enhancements > 400 W/m{sup 2}) up to 140 seconds (enhancements > 200 W/m{sup 2}). (orig.)

Towards a Reference Architecture to Provision Tools as a Service for Global Software Development

DEFF Research Database (Denmark)

Chauhan, Aufeef; Babar, Muhammad Ali

2014-01-01

Organizations involve in Global Software Development (GSD) face challenges in terms of having access to appropriate set of tools for performing distributed engineering and development activities, integration between heterogeneous desktop and web-based tools, management of artifacts developed...... distributed environment. In this paper, we argue the need to have a cloud-enabled platform for supporting GSD and propose reference architecture of a cloud based Platform for providing support to provision ecosystem of the Tools as a Service (PTaaS)....

TOMS/Earth Probe UV-B Erythemal Local Noon Irradiance Monthly L3 Global 1x1.25 deg Lat/Lon Grid V008

Data.gov (United States)

National Aeronautics and Space Administration — This data product contains TOMS/Earth Probe UV-B Erythemal Local Noon Irradiance Monthly L3 Global 1x1.25 deg Lat/Lon Grid Version 8 data in ASCII format. (The...

TOMS/Nimbus-7 UV-B Erythemal Local Noon Irradiance Daily L3 Global 1x1.25 deg Lat/Lon Grid V008

Data.gov (United States)

National Aeronautics and Space Administration — This data product contains TOMS/Nimbus-7 UV-B Erythemal Local Noon Irradiance Daily L3 Global 1x1.25 deg Lat/Lon Grid Version 8 data in ASCII format. The Total Ozone...

A 'Global Reference' Comparator for Biosimilar Development.

Science.gov (United States)

Webster, Christopher J; Woollett, Gillian R

2017-08-01

Major drug regulators have indicated in guidance their flexibility to accept some development data for biosimilars generated with reference product versions licensed outside their own jurisdictions, but most authorities require new bridging studies between these versions and the versions of them licensed locally. The costs of these studies are not trivial in absolute terms and, due to the multiplier effect of required repetition by each biosimilar sponsor, their collective costs are substantial. Yet versions of biologics licensed in different jurisdictions usually share the same development data, and any manufacturing changes between versions have been justified by a rigorous comparability process. The fact that a biosimilar is usually expected to be licensed in multiple jurisdictions, in each case as similar to the local reference product, confirms that minor analytical differences between versions of reference biologics are typically inconsequential for clinical outcomes and licensing. A greatly simplified basis for selecting a reference comparator, that does not require conducting new bridging studies, is proposed and justified based on the shared data of the reference product versions as well as the proof offered where biosimilars have already been approved. The relevance of this proposal to the interchangeability designation available in the US is discussed.

Safer food means food irradiation

International Nuclear Information System (INIS)

Steele, J.H.

2000-01-01

In this article the author presents the sanitary advantages that are brought by food irradiation. OMS experts state that this technique is safe and harmless for any average global dose between 10 KGy and 100 KGy. Whenever a seminar is held on the topic, it is always concluded that food irradiation should be promoted and favoured. In France food irradiation is authorized for some kinds of products and exceptionally above a 10 KGy dose. Historically food irradiation has been hampered in its development by its classification by American Authorities as food additives in 1958 (Delanay clause). The author draws a parallel between food irradiation and pasteurization or food deep-freezing in their beginnings. (A.C.)

Global panel of HIV-1 Env reference strains for standardized assessments of vaccine-elicited neutralizing antibodies.

Science.gov (United States)

deCamp, Allan; Hraber, Peter; Bailer, Robert T; Seaman, Michael S; Ochsenbauer, Christina; Kappes, John; Gottardo, Raphael; Edlefsen, Paul; Self, Steve; Tang, Haili; Greene, Kelli; Gao, Hongmei; Daniell, Xiaoju; Sarzotti-Kelsoe, Marcella; Gorny, Miroslaw K; Zolla-Pazner, Susan; LaBranche, Celia C; Mascola, John R; Korber, Bette T; Montefiori, David C

2014-03-01

Standardized assessments of HIV-1 vaccine-elicited neutralizing antibody responses are complicated by the genetic and antigenic variability of the viral envelope glycoproteins (Envs). To address these issues, suitable reference strains are needed that are representative of the global epidemic. Several panels have been recommended previously, but no clear answers have been available on how many and which strains are best suited for this purpose. We used a statistical model selection method to identify a global panel of reference Env clones from among 219 Env-pseudotyped viruses assayed in TZM-bl cells with sera from 205 HIV-1-infected individuals. The Envs and sera were sampled globally from diverse geographic locations and represented all major genetic subtypes and circulating recombinant forms of the virus. Assays with a panel size of only nine viruses adequately represented the spectrum of HIV-1 serum neutralizing activity seen with the larger panel of 219 viruses. An optimal panel of nine viruses was selected and augmented with three additional viruses for greater genetic and antigenic coverage. The spectrum of HIV-1 serum neutralizing activity seen with the final 12-virus panel closely approximated the activity seen with subtype-matched viruses. Moreover, the final panel was highly sensitive for detection of many of the known broadly neutralizing antibodies. For broader assay applications, all 12 Env clones were converted to infectious molecular clones using a proviral backbone carrying a Renilla luciferase reporter gene (Env.IMC.LucR viruses). This global panel should facilitate highly standardized assessments of vaccine-elicited neutralizing antibodies across multiple HIV-1 vaccine platforms in different parts of the world. An effective HIV-1 vaccine will need to overcome the extraordinary genetic variability of the virus, where most variation occurs in the viral envelope glycoproteins that are the sole targets for neutralizing antibodies. Efforts to elicit

A Simple Method Using a Topography Correction Coefficient for Estimating Daily Distribution of Solar Irradiance in Complex Terrain

International Nuclear Information System (INIS)

Yun, J.I.

2009-01-01

Accurate solar radiation data are critical to evaluate major physiological responses of plants. For most upland crops and orchard plants growing in complex terrain, however, it is not easy for farmers or agronomists to access solar irradiance data. Here we suggest a simple method using a sun-slope geometry based topographical coefficient to estimate daily solar irradiance on any sloping surfaces from global solar radiation measured at a nearby weather station. An hourly solar irradiance ratio (W i ) between sloping and horizontal surface is defined as multiplication of the relative solar intensity (k i ) and the slope irradiance ratio (r i ) at an hourly interval. The k i is the ratio of hourly solar radiation to the 24 hour cumulative radiation on a horizontal surface under clear sky conditions. The r i is the ratio of clear sky radiation on a given slope to that on a horizontal reference. Daily coefficient for slope correction is simply the sum of W i on each date. We calculated daily solar irradiance at 8 side slope locations circumventing a cone-shaped parasitic volcano (c.a., 570 m diameter for the bottom circle and 90 m bottom-to-top height) by multiplying these coefficients to the global solar radiation measured horizontally. Comparison with the measured slope irradiance from April 2007 to March 2008 resulted in the root mean square error (RMSE) of 1.61 MJ m −2 for the whole period but the RMSE for April to October (i.e., major cropping season in Korea) was much lower and satisfied the 5% error tolerance for radiation measurement. The RMSE was smallest in October regardless of slope aspect, and the aspect dependent variation of RMSE was greatest in November. Annual variation in RMSE was greatest on north and south facing slopes, followed by southwest, southeast, and northwest slopes in decreasing order. Once the coefficients are prepared, global solar radiation data from nearby stations can be easily converted to the solar irradiance map at landscape

Generating Ground Reference Data for a Global Impervious Surface Survey

Science.gov (United States)

Tilton, James C.; deColstoun, Eric Brown; Wolfe, Robert E.; Tan, Bin; Huang, Chengquan

2012-01-01

We are engaged in a project to produce a 30m impervious cover data set of the entire Earth for the years 2000 and 2010 based on the Landsat Global Land Survey (GLS) data set. The GLS data from Landsat provide an unprecedented opportunity to map global urbanization at this resolution for the first time, with unprecedented detail and accuracy. Moreover, the spatial resolution of Landsat is absolutely essential to accurately resolve urban targets such as buildings, roads and parking lots. Finally, with GLS data available for the 1975, 1990, 2000, and 2005 time periods, and soon for the 2010 period, the land cover/use changes due to urbanization can now be quantified at this spatial scale as well. Our approach works across spatial scales using very high spatial resolution commercial satellite data to both produce and evaluate continental scale products at the 30m spatial resolution of Landsat data. We are developing continental scale training data at 1m or so resolution and aggregating these to 30m for training a regression tree algorithm. Because the quality of the input training data are critical, we have developed an interactive software tool, called HSegLearn, to facilitate the photo-interpretation of high resolution imagery data, such as Quickbird or Ikonos data, into an impervious versus non-impervious map. Previous work has shown that photo-interpretation of high resolution data at 1 meter resolution will generate an accurate 30m resolution ground reference when coarsened to that resolution. Since this process can be very time consuming when using standard clustering classification algorithms, we are looking at image segmentation as a potential avenue to not only improve the training process but also provide a semi-automated approach for generating the ground reference data. HSegLearn takes as its input a hierarchical set of image segmentations produced by the HSeg image segmentation program [1, 2]. HSegLearn lets an analyst specify pixel locations as being

European Fusion Programme. ITER task T23: Beryllium characterisation. Progress report. Tensile tests on neutron irradiated and reference beryllium

International Nuclear Information System (INIS)

Moons, F.

1996-02-01

As part of the European Technology Fusion Programme, the irradiation embrittlement characteristics of the more ductile and isotopic grades of beryllium manufactured by Brush Wellman has been investigated using modern powder production and consolidation techniques . This study was initiated in support of the development and evaluation of beryllium as a neutron multiplier for the solid breeder blanket design concepts proposed for a DEMO fusion power reactor. Four different species of beryllium: S-200 F (vacuum hot pressed, 1.2 wt% BeO), S-200FH (hot isostatic pressed, 0.9 wt% BeO), S-65 (vacuum hot pressed, 0.6 wt% BeO), S-65H (hot isostatic pressed, 0.5 wt% BeO) have been compared. Three batches of the beryllium have been investigated, a neutron batch, a thermal control batch and a reference batch. Neutron irradiation has been performed at temperatures between 175 and 605 degrees Celsius up to a neutron fluence of 2.1 10 25 n.m -2 (E> 1 MeV) or 750 appm He. The results of the tensile tests are summarized

Global Reference Tables for Production Systems

Data.gov (United States)

Social Security Administration — This database is a collection of reference tables that store common information used throughout SSA. These tables standardized code structures and code usage of SSA...

The ARBOR irradiation project

International Nuclear Information System (INIS)

Petersen, C.; Shamardin, V.; Fedoseev, A.; Shimansky, G.; Efimov, V.; Rensman, J.

2002-01-01

The irradiation project 'ARBOR', for 'Associated Reactor Irradiation in BOR 60', includes 150 mini-tensile/low cycle fatigue specimens and 150 mini-Charpy (KLST) specimens of nine different RAFM steels. Specimens began irradiation on 22 November 2000 in an specially designed irradiation rig in BOR 60, in a fast neutron flux (>0.1 MeV) of 1.8x10 15 n/cm 2 s and with direct sodium cooling at a temperature less than 340 deg. C. Tensile, low cycle fatigue and Charpy specimens of the following materials are included: EUROFER 97, F82H mod., OPTIFER IVc, EUROFER 97 with different boron contents, ODS-EUROFER 97, as well as EUROFER 97 electron-beam welded and reference bulk material, from NRG, Petten

Recent developments in intellectual property law in Australia with some reference to the global economy

OpenAIRE

Crennan, Susan

2010-01-01

This paper by Susan Crennan, Justice of the High Court of Australia, addresses developments in Australia in intellectual property law, with some reference to the global economy, and deals with two patent cases, two copyright cases and a designs case. The paper was original presented as a lecture at the Institute of Advanced Legal Studies and is published in Amicus Curiae - Journal of the Society for Advanced Legal Studies. The Journal is produced by the Society for Advanced Legal Studies at t...

Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This test method covers calibration and characterization of secondary terrestrial photovoltaic reference cells to a desired reference spectral irradiance distribution. The recommended physical requirements for these reference cells are described in Specification E1040. Reference cells are principally used in the determination of the electrical performance of a photovoltaic device. 1.2 Secondary reference cells are calibrated indoors using simulated sunlight or outdoors in natural sunlight by reference to a primary reference cell previously calibrated to the same desired reference spectral irradiance distribution. 1.3 Secondary reference cells calibrated according to this test method will have the same radiometric traceability as the of the primary reference cell used for the calibration. Therefore, if the primary reference cell is traceable to the World Radiometric Reference (WRR, see Test Method E816), the resulting secondary reference cell will also be traceable to the WRR. 1.4 This test method appli...

Dosimetric survey in industrial irradiators and dosimetric systems calibration

International Nuclear Information System (INIS)

Grossi, Pablo Andrade; Correa, Ricardo Ferracini; Oliveira, Paulo Marcio C. de

2005-01-01

The work seeks the collecting of dose rate points for irradiation research plants and calibration of commercial dosimeters, using dosimeters standard references. Using the obtained data is possible to determine the absorbed doses in any point of an irradiation room, assuring the value of absorbed dose in the irradiated product, with the use of the commercial dosimeters. The commercial dosimeters used in this work are polymethylmethacrylate (PMMA), and the reference dosimeters used are Fricke's solution. Among the advantages of the accomplishment of this work, it can stand out the quality assurance of the services rendered by Centro de Desenvolvimento da Tecnologia Nuclear to their customers and to the society, in the purpose of optimization of exposition time of the irradiated products, in way to guarantee the absorbed doses in each irradiated material with a good precision

Global cross-station assessment of neuro-fuzzy models for estimating daily reference evapotranspiration

Science.gov (United States)

Shiri, Jalal; Nazemi, Amir Hossein; Sadraddini, Ali Ashraf; Landeras, Gorka; Kisi, Ozgur; Fard, Ahmad Fakheri; Marti, Pau

2013-02-01

SummaryAccurate estimation of reference evapotranspiration is important for irrigation scheduling, water resources management and planning and other agricultural water management issues. In the present paper, the capabilities of generalized neuro-fuzzy models were evaluated for estimating reference evapotranspiration using two separate sets of weather data from humid and non-humid regions of Spain and Iran. In this way, the data from some weather stations in the Basque Country and Valencia region (Spain) were used for training the neuro-fuzzy models [in humid and non-humid regions, respectively] and subsequently, the data from these regions were pooled to evaluate the generalization capability of a general neuro-fuzzy model in humid and non-humid regions. The developed models were tested in stations of Iran, located in humid and non-humid regions. The obtained results showed the capabilities of generalized neuro-fuzzy model in estimating reference evapotranspiration in different climatic zones. Global GNF models calibrated using both non-humid and humid data were found to successfully estimate ET0 in both non-humid and humid regions of Iran (the lowest MAE values are about 0.23 mm for non-humid Iranian regions and 0.12 mm for humid regions). non-humid GNF models calibrated using non-humid data performed much better than the humid GNF models calibrated using humid data in non-humid region while the humid GNF model gave better estimates in humid region.

How calibration and reference spectra affect the accuracy of absolute soft X-ray solar irradiance measured by the SDO/EVE/ESP during high solar activity

Science.gov (United States)

Didkovsky, Leonid; Wieman, Seth; Woods, Thomas

2016-10-01

The Extreme ultraviolet Spectrophotometer (ESP), one of the channels of SDO's Extreme ultraviolet Variability Experiment (EVE), measures solar irradiance in several EUV and soft x-ray (SXR) bands isolated using thin-film filters and a transmission diffraction grating, and includes a quad-diode detector positioned at the grating zeroth-order to observe in a wavelength band from about 0.1 to 7.0 nm. The quad diode signal also includes some contribution from shorter wavelength in the grating's first-order and the ratio of zeroth-order to first-order signal depends on both source geometry, and spectral distribution. For example, radiometric calibration of the ESP zeroth-order at the NIST SURF BL-2 with a near-parallel beam provides a different zeroth-to-first-order ratio than modeled for solar observations. The relative influence of "uncalibrated" first-order irradiance during solar observations is a function of the solar spectral irradiance and the locations of large Active Regions or solar flares. We discuss how the "uncalibrated" first-order "solar" component and the use of variable solar reference spectra affect determination of absolute SXR irradiance which currently may be significantly overestimated during high solar activity.

Quality assessment of solar UV irradiance measured with array spectroradiometers

Science.gov (United States)

Egli, Luca; Gröbner, Julian; Hülsen, Gregor; Bachmann, Luciano; Blumthaler, Mario; Dubard, Jimmy; Khazova, Marina; Kift, Richard; Hoogendijk, Kees; Serrano, Antonio; Smedley, Andrew; Vilaplana, José-Manuel

2016-04-01

The reliable quantification of ultraviolet (UV) radiation at the earth's surface requires accurate measurements of spectral global solar UV irradiance in order to determine the UV exposure to human skin and to understand long-term trends in this parameter. Array spectroradiometers (ASRMs) are small, light, robust and cost-effective instruments, and are increasingly used for spectral irradiance measurements. Within the European EMRP ENV03 project "Solar UV", new devices, guidelines and characterization methods have been developed to improve solar UV measurements with ASRMs, and support to the end user community has been provided. In order to assess the quality of 14 end user ASRMs, a solar UV intercomparison was held on the measurement platform of the World Radiation Center (PMOD/WRC) in Davos, Switzerland, from 10 to 17 July 2014. The results of the blind intercomparison revealed that ASRMs, currently used for solar UV measurements, show a large variation in the quality of their solar UV measurements. Most of the instruments overestimate the erythema-weighted UV index - in particular at large solar zenith angles - due to stray light contribution in the UV-B range. The spectral analysis of global solar UV irradiance further supported the finding that the uncertainties in the UV-B range are very large due to stray light contribution in this wavelength range. In summary, the UV index may be detected by some commercially available ASRMs within 5 % compared to the world reference spectroradiometer, if well characterized and calibrated, but only for a limited range of solar zenith angles. Generally, the tested instruments are not yet suitable for solar UV measurements for the entire range between 290 and 400 nm under all atmospheric conditions.

High-resolution global grids of revised Priestley-Taylor and Hargreaves-Samani coefficients for assessing ASCE-standardized reference crop evapotranspiration and solar radiation

Science.gov (United States)

Aschonitis, Vassilis G.; Papamichail, Dimitris; Demertzi, Kleoniki; Colombani, Nicolo; Mastrocicco, Micol; Ghirardini, Andrea; Castaldelli, Giuseppe; Fano, Elisa-Anna

2017-08-01

The objective of the study is to provide global grids (0.5°) of revised annual coefficients for the Priestley-Taylor (P-T) and Hargreaves-Samani (H-S) evapotranspiration methods after calibration based on the ASCE (American Society of Civil Engineers)-standardized Penman-Monteith method (the ASCE method includes two reference crops: short-clipped grass and tall alfalfa). The analysis also includes the development of a global grid of revised annual coefficients for solar radiation (Rs) estimations using the respective Rs formula of H-S. The analysis was based on global gridded climatic data of the period 1950-2000. The method for deriving annual coefficients of the P-T and H-S methods was based on partial weighted averages (PWAs) of their mean monthly values. This method estimates the annual values considering the amplitude of the parameter under investigation (ETo and Rs) giving more weight to the monthly coefficients of the months with higher ETo values (or Rs values for the case of the H-S radiation formula). The method also eliminates the effect of unreasonably high or low monthly coefficients that may occur during periods where ETo and Rs fall below a specific threshold. The new coefficients were validated based on data from 140 stations located in various climatic zones of the USA and Australia with expanded observations up to 2016. The validation procedure for ETo estimations of the short reference crop showed that the P-T and H-S methods with the new revised coefficients outperformed the standard methods reducing the estimated root mean square error (RMSE) in ETo values by 40 and 25 %, respectively. The estimations of Rs using the H-S formula with revised coefficients reduced the RMSE by 28 % in comparison to the standard H-S formula. Finally, a raster database was built consisting of (a) global maps for the mean monthly ETo values estimated by ASCE-standardized method for both reference crops, (b) global maps for the revised annual coefficients of the P

The ARBOR irradiation project

Energy Technology Data Exchange (ETDEWEB)

Petersen, C. E-mail: claus.petersen@imf.fzk.de; Shamardin, V.; Fedoseev, A.; Shimansky, G.; Efimov, V.; Rensman, J

2002-12-01

The irradiation project 'ARBOR', for 'Associated Reactor Irradiation in BOR 60', includes 150 mini-tensile/low cycle fatigue specimens and 150 mini-Charpy (KLST) specimens of nine different RAFM steels. Specimens began irradiation on 22 November 2000 in an specially designed irradiation rig in BOR 60, in a fast neutron flux (>0.1 MeV) of 1.8x10{sup 15} n/cm{sup 2} s and with direct sodium cooling at a temperature less than 340 deg. C. Tensile, low cycle fatigue and Charpy specimens of the following materials are included: EUROFER 97, F82H mod., OPTIFER IVc, EUROFER 97 with different boron contents, ODS-EUROFER 97, as well as EUROFER 97 electron-beam welded and reference bulk material, from NRG, Petten.

Phytosanitary irradiation and fresh fruit quality: Cultivar and maturity effects

Science.gov (United States)

Irradiation is an effective quarantine treatment for global trade of fresh produce. Variation in cultivars and maturity stages can impact the tolerance of fresh fruits to irradiation for the purposes of quarantine security. Tolerance thresholds for irradiated fruit are lacking for a large number of ...

Decommissioning of an Irradiator MPX-γ - 25M and a neutron Irradiator

International Nuclear Information System (INIS)

Soguero, Dania; Guerra, Mercedes; Prieto, Enrique; Desdin, Luis

2013-01-01

In this paper a technology is developed with its procedures in radiation protection to ensure the safety of the process of decommissioning of two irradiators. Both processes are described, the process of decommissioning of a neutron Irradiator 4. 44·10 11 Bq, employed in the vegetal radio mutagenesis, and disassembling of an installation of gamma irradiation of 3.33 * 10 12 Bq, self-shielded of category I, model MPX - γ - 25 M. The specific objectives are: a) identify aspects of the contractual assurance, of human and technical resources, b) to evaluate the radiological situation of the process and c) analyze the potential radiological extraordinary events in each of the steps of the process, ensuring the right answers. Evaluation of radiological successful events described can be considered as reference to address the process of disassembling of other similar irradiators

Photosynthesis-irradiance parameters of marine phytoplankton: synthesis of a global data set

Science.gov (United States)

Bouman, Heather A.; Platt, Trevor; Doblin, Martina; Figueiras, Francisco G.; Gudmundsson, Kristinn; Gudfinnsson, Hafsteinn G.; Huang, Bangqin; Hickman, Anna; Hiscock, Michael; Jackson, Thomas; Lutz, Vivian A.; Mélin, Frédéric; Rey, Francisco; Pepin, Pierre; Segura, Valeria; Tilstone, Gavin H.; van Dongen-Vogels, Virginie; Sathyendranath, Shubha

2018-02-01

The photosynthetic performance of marine phytoplankton varies in response to a variety of factors, environmental and taxonomic. One of the aims of the MArine primary Production: model Parameters from Space (MAPPS) project of the European Space Agency is to assemble a global database of photosynthesis-irradiance (P-E) parameters from a range of oceanographic regimes as an aid to examining the basin-scale variability in the photophysiological response of marine phytoplankton and to use this information to improve the assignment of P-E parameters in the estimation of global marine primary production using satellite data. The MAPPS P-E database, which consists of over 5000 P-E experiments, provides information on the spatio-temporal variability in the two P-E parameters (the assimilation number, PmB, and the initial slope, αB, where the superscripts B indicate normalisation to concentration of chlorophyll) that are fundamental inputs for models (satellite-based and otherwise) of marine primary production that use chlorophyll as the state variable. Quality-control measures consisted of removing samples with abnormally high parameter values and flags were added to denote whether the spectral quality of the incubator lamp was used to calculate a broad-band value of αB. The MAPPS database provides a photophysiological data set that is unprecedented in number of observations and in spatial coverage. The database will be useful to a variety of research communities, including marine ecologists, biogeochemical modellers, remote-sensing scientists and algal physiologists. The compiled data are available at https://doi.org/10.1594/PANGAEA.874087 (Bouman et al., 2017).

Advanced solar irradiances applied to satellite and ionospheric operational systems

Science.gov (United States)

Tobiska, W. Kent; Schunk, Robert; Eccles, Vince; Bouwer, Dave

Satellite and ionospheric operational systems require solar irradiances in a variety of time scales and spectral formats. We describe the development of a system using operational grade solar irradiances that are applied to empirical thermospheric density models and physics-based ionospheric models used by operational systems that require a space weather characterization. The SOLAR2000 (S2K) and SOLARFLARE (SFLR) models developed by Space Environment Technologies (SET) provide solar irradiances from the soft X-rays (XUV) through the Far Ultraviolet (FUV) spectrum. The irradiances are provided as integrated indices for the JB2006 empirical atmosphere density models and as line/band spectral irradiances for the physics-based Ionosphere Forecast Model (IFM) developed by the Space Environment Corporation (SEC). We describe the integration of these irradiances in historical, current epoch, and forecast modes through the Communication Alert and Prediction System (CAPS). CAPS provides real-time and forecast HF radio availability for global and regional users and global total electron content (TEC) conditions.

Post-irradiation characterization of PH13-8Mo martensitic stainless steel

Energy Technology Data Exchange (ETDEWEB)

Jong, M.; Schmalz, F.; Rensman, J.W. [Nuclear Research and consultancy Group, Westerduinweg 3, 1755 ZG Petten (Netherlands); Luzginova, N.V., E-mail: luzginova@nrg.eu [Nuclear Research and consultancy Group, Westerduinweg 3, 1755 ZG Petten (Netherlands); Wouters, O.; Hegeman, J.B.J.; Laan, J.G. van der [Nuclear Research and consultancy Group, Westerduinweg 3, 1755 ZG Petten (Netherlands)

2011-10-01

The irradiation response of PH13-8Mo stainless steel was measured up to 2.5 dpa at 200 and 300 deg. C irradiation temperatures. The PH13-8Mo, a martensitic precipitation-hardened steel, was produced by Hot Isostatic Pressing at 1030 deg. C. The fatigue tests (high cycle fatigue and fatigue crack propagation) showed a test temperature dependency but no irradiation effects. Tensile tests showed irradiation hardening (yield stress increase) of approximately 37% for 200 deg. C irradiated material tested at 60 deg. C and approximately 32% for 300 deg. C irradiated material tested at 60 deg. C. This contradicts the shift in reference temperature (T{sub 0}) measured in toughness tests (Master Curve approach), where the {Delta}T{sub 0} for 300 deg. C irradiated is approximately 170 deg. C and the {Delta}T{sub 0} for the 200 deg. C irradiated is approximately 160 deg. C. This means that the irradiation hardening of PH13-8Mo steel is not suitable to predict the shift in the reference temperature for the Master Curve approach.

Phytosanitary irradiation - Development and application

Science.gov (United States)

Hallman, Guy J.; Loaharanu, Paisan

2016-12-01

Phytosanitary irradiation, the use of ionizing radiation to disinfest traded agricultural commodities of regulated pests, is a growing use of food irradiation that has great continued potential for increase in commercial application. In 2015 approximately 25,000 t of fresh fruits and vegetables were irradiated globally for phytosanitary purposes. Phytosanitary irradiation has resulted in a paradigm shift in phytosanitation in that the final burden of proof of efficacy of the treatment has shifted from no live pests upon inspection at a port of entry (as for all previous phytosanitary treatments) to total dependence on certification that the treatment for target pests is based on adequate science and is commercially conducted and protected from post-treatment infestation. In this regard phytosanitary irradiation is managed more like a hazard analysis and critical control point (HACCP) approach more consistent with food safety than phytosanitation. Thus, phytosanitary irradiation offers a more complete and rigorous methodology for safeguarding than other phytosanitary measures. The role of different organizations in achieving commercial application of phytosanitary irradiation is discussed as well as future issues and applications, including new generic doses.

Irradiance gradients

International Nuclear Information System (INIS)

Ward, G.J.; Heckbert, P.S.; Technische Hogeschool Delft

1992-04-01

A new method for improving the accuracy of a diffuse interreflection calculation is introduced in a ray tracing context. The information from a hemispherical sampling of the luminous environment is interpreted in a new way to predict the change in irradiance as a function of position and surface orientation. The additional computation involved is modest and the benefit is substantial. An improved interpolation of irradiance resulting from the gradient calculation produces smoother, more accurate renderings. This result is achieved through better utilization of ray samples rather than additional samples or alternate sampling strategies. Thus, the technique is applicable to a variety of global illumination algorithms that use hemicubes or Monte Carlo sampling techniques

Man -made greenhouse gases trigger unified force to start global warming impacts referred to as climate change

International Nuclear Information System (INIS)

Karishnan, K.J.; Kalam, A.

2011-01-01

Global warming problems due to man-made greenhouse gases (GHGs), appear to be a serious concern and threat to the globe. CO/sub 2/, O/sub 3, NOx and HFC's are the main greenhouse gases and CO/sub 2/ is one of the main cause of global warming. CO/sub 2/ is emitted from burning fossil fuels to produce electricity from power plants and burning of gasoline in vehicles and airplanes. Global greenhouse gases and its sources in regions are discussed in this paper. This paper initially discusses the CO/sub 2/ emissions and the recycle of CO/sub 2/ in biodiesel. This paper mainly focuses on 'Unified Force'. The increase of H/sub 2/O in the sea due to warming of the globe triggers the 'Unified Force' or 'Self-Compressive Surrounding Pressure Force' which is proportional to the H/sub 2/O level in the sea to start global warming impacts referred to as climate change. This paper also points out the climate change and the ten surprising results of global warming. Finally, this paper suggests switching from fossil fuel technology to green energy technologies like biodiesel which recycles CO/sub 2/ emissions and also Hydrogen Energy and Fuel Cell Technologies which eradicates global warming impacts. The benefits of switching from fossil fuel to biodiesel and Hydrogen Energy utilization includes reduction of greenhouse gas emissions and pollution, economic independence by having distributed production and burning of biodiesel does not add extra CO/sub 2/ to the air that contributes global warming impacts. (author)

Radurization of spices by irradiation in Cuba

International Nuclear Information System (INIS)

Alvarez Gil, M.; Rodriguez, M.; Prieto, E.; Pino, J.

1997-01-01

This paper presents the research results that prove the technical feasibility according to the hygiene conditions existing in Cuba for irradiating different spices. The results show both the possibility and and the benefit of using a one irradiation application to these products. One global average doses of 5 KGy was enough for decontaminating black pepper, paprika, cumin, must meg and oregano without affecting either their chemical components or the quality of their taste. Sausages manufactured with irradiated spices did not irradiating spices is much higher that of fumigation, et has many important social and economic advantages

Food irradiation: Applications, public acceptance and global trade ...

African Journals Online (AJOL)

The process involves exposing the packed or bulked food to the rays of the sun. Food irradiation processing that entails combating post-harvest losses, curtailing food-borne disease and overcoming quarantine barriers has been pursued since the mid-50s. The scientific basis and technological adaptation of the process ...

Spatial And Temporal Patterns As Well As Major Influencing Factors Of Global And Diffuse Horizontal Irradiance Over China: 1960-2014

Science.gov (United States)

Wang, H.; Sun, F.

2017-12-01

Global Horizontal Irradiance (GHI) on Earth is a central element of climate systems. With changes in the climate and regional development, the patterns and influencing factors of GHI, in addition to presenting global consistency, are increasingly showing regional particularities. Based on data for GHI, Diffuse Horizontal Irradiance (DHI) and potential impact factors (geographical position, elevation, cloud cover, water vapor, and ground atmospheric transparency related variables) from 1960 to 2014 in China, we analyzed the pattern and major influencing factors of GHI and DHI. The results showed that the major influencing factors of the GHI spatial pattern were the total cloud cover (TCC) and relative humidity (RH) in China. Dividing all of China into two regions, the major factors were the water vapor pressure (WVP) in the northern region and TCC in the southern region. And we divided the GHI and DHI data into two periods (1960-1987 and 1988-2014) due to global dimming and brightening observed in China in the late 1980's. The temporal GHI showed that 31 of 58 decreased significantly with an average decreasing rate of 95 MJ.10yr-1 during the periods of 1960-2014 and 49 of 76 stations decreased significantly with an rate of 342 MJ.10yr-1 during 1960-1987, whereas 57 of 88 stations did not change and 24 stations increased significantly with an rate of 201 MJ.10yr-1 during the period of 1988-2014. The temporal DHI showed that 40 of 61sites did not change significantly from 1960 to 1987. The major influencing factors for temporal changes of GHI in nine typical cities from 1960 to 2013 were as follows: air quality-related variables in super cities, sandstorms and wind in desert oasis cities, clouds in cities with good air quality and a low cloud amount (LCA) and annual fog days (FD) in Chengdu. Overall, we identified characteristics of GHI and DHI based on global climate change and regional urban development and found that the spatial characteristics of GHI results for

Preliminary study on sterilization effect of irradiation on dry vegetable

International Nuclear Information System (INIS)

Zhai Jianqing; Bao Jianzhong; Cao Hong; Wang Jinrong; Chen Xiulan

2004-01-01

The number of surviving germs relationship to irradiation dose for several species dry vegetable was studied, and the original value D 10 of the dry vegetable was given. The value will provide a theoretical reference to ascertain the appropriate irradiation dose in the irradiation process of the dry vegetable

Food irradiation: Applications, public acceptance and global trade

African Journals Online (AJOL)

USER

2010-05-17

May 17, 2010 ... Atomic Energy Organization of Iran, Nuclear Science and Technology ... “the irradiation of any food commodity up to an overall average dose of 10 KGy presents no ... years in the wake of food-borne disease caused by pathogenic organisms. In fact ... quality of food consumed within the region (Ahari and.

X-ray irradiation of RC-MAP pre-stored for various numbers of days. Effect of X-ray irradiation on RC-MAP and reuse of RC-MAP after irradiation

International Nuclear Information System (INIS)

Yamada, Naotomo; Nagumo, Fumio; Kawasaki, Seiji; Matsuzaki, Miwako; Tadano, Jutaro

1995-01-01

X-ray irradiation is currently in wide use as a means of preventing post-transfusion graft-versus-host disease (PT-GVHD). In this study, we evaluated the effects of X-ray irradiation on RC-MAP pre-stored for various numbers of days, and assessed how long irradiated RC-MAP can be stored. RC-MAP was irradiated at a dosage of 15 Gy at 1, 7, 14, 21 or 28 days after blood collection. These specimens were referred to as group I, II, III, IV and V (X-ray-irradiated groups), respectively. Non-irradiated RC-MAP was used as the control. Results showed that plasma K concentration increased after X-ray irradiation. It is therefore advisable that RC-MAPs be used immediately in infants and in renal failure. However, to maximize the efficiency of blood product use, it seemed possible that groups I and II could be used within two weeks after irradiation, and group III within one week. On the basis of this increase in K concentration, however, groups IV and V plasma should be used immediately after irradiation. (author)

Irradiation creep of dispersion strengthened copper alloy

Energy Technology Data Exchange (ETDEWEB)

Pokrovsky, A.S.; Barabash, V.R.; Fabritsiev, S.A. [and others

1997-04-01

Dispersion strengthened copper alloys are under consideration as reference materials for the ITER plasma facing components. Irradiation creep is one of the parameters which must be assessed because of its importance for the lifetime prediction of these components. In this study the irradiation creep of a dispersion strengthened copper (DS) alloy has been investigated. The alloy selected for evaluation, MAGT-0.2, which contains 0.2 wt.% Al{sub 2}O{sub 3}, is very similar to the GlidCop{trademark} alloy referred to as Al20. Irradiation creep was investigated using HE pressurized tubes. The tubes were machined from rod stock, then stainless steel caps were brazed onto the end of each tube. The creep specimens were pressurized by use of ultra-pure He and the stainless steel caps subsequently sealed by laser welding. These specimens were irradiated in reactor water in the core position of the SM-2 reactors to a fluence level of 4.5-7.1 x 10{sup 21} n/cm{sup 2} (E>0.1 MeV), which corresponds to {approx}3-5 dpa. The irradiation temperature ranged from 60-90{degrees}C, which yielded calculated hoop stresses from 39-117 MPa. A mechanical micrometer system was used to measure the outer diameter of the specimens before and after irradiation, with an accuracy of {+-}0.001 mm. The irradiation creep was calculated based on the change in the diameter. Comparison of pre- and post-irradiation diameter measurements indicates that irradiation induced creep is indeed observed in this alloy at low temperatures, with a creep rate as high as {approx}2 x 10{sup {minus}9}s{sup {minus}1}. These results are compared with available data for irradiation creep for stainless steels, pure copper, and for thermal creep of copper alloys.

Irradiation creep of dispersion strengthened copper alloy

International Nuclear Information System (INIS)

Pokrovsky, A.S.; Barabash, V.R.; Fabritsiev, S.A.

1997-01-01

Dispersion strengthened copper alloys are under consideration as reference materials for the ITER plasma facing components. Irradiation creep is one of the parameters which must be assessed because of its importance for the lifetime prediction of these components. In this study the irradiation creep of a dispersion strengthened copper (DS) alloy has been investigated. The alloy selected for evaluation, MAGT-0.2, which contains 0.2 wt.% Al 2 O 3 , is very similar to the GlidCop trademark alloy referred to as Al20. Irradiation creep was investigated using HE pressurized tubes. The tubes were machined from rod stock, then stainless steel caps were brazed onto the end of each tube. The creep specimens were pressurized by use of ultra-pure He and the stainless steel caps subsequently sealed by laser welding. These specimens were irradiated in reactor water in the core position of the SM-2 reactors to a fluence level of 4.5-7.1 x 10 21 n/cm 2 (E>0.1 MeV), which corresponds to ∼3-5 dpa. The irradiation temperature ranged from 60-90 degrees C, which yielded calculated hoop stresses from 39-117 MPa. A mechanical micrometer system was used to measure the outer diameter of the specimens before and after irradiation, with an accuracy of ±0.001 mm. The irradiation creep was calculated based on the change in the diameter. Comparison of pre- and post-irradiation diameter measurements indicates that irradiation induced creep is indeed observed in this alloy at low temperatures, with a creep rate as high as ∼2 x 10 -9 s -1 . These results are compared with available data for irradiation creep for stainless steels, pure copper, and for thermal creep of copper alloys

Field measurements of the global UV-B radiation: a comparison between a broad-band radiometer and a Brewer spectrophotometer

International Nuclear Information System (INIS)

Anav, A.; Moriconi, M.L.; Di Menno, M.; Giannoccolo, S.

1996-01-01

The spectral responsivity shape plays an important role in the prospect of a wide use of broad-band meters in the UV-B monitoring. As most UV-B broad-band meters have a responsivity approximating an erythemal action spectrum, a measurement campaign was planned to verify if such an instrument could be successfully used to measure the unfiltered global irradiance. A Yankee radiometer mod. UV-B 1 and a Brewer spectrophotometer, considered as a reference meter, were compared for this purpose. A short theoretical treatment of the Yankee radiometer response and some results of the comparison are shown. Only clear-sky days data are selected so that the UV-B radiation reaching the ground could be modelled as the sum of the direct and isotropic diffuse components. The comparison results show a good agreement between the two instruments and confirm the capability of a broad-band UV-B radiometer of correctly measuring the global irradiance

Applications of irradiation in horticultural produce

International Nuclear Information System (INIS)

O'Beirne, David

1985-01-01

In the case of horticultural produce, the usefulness of irradiation is selective and irradiation may be most beneficial when used in conjunction with other preservative treatments such as mild refrigeration. Big benefits may be derived from energy saving in the degree of chilling required, in extended shelf-life and in quality retention with particular reference to mushrooms and strawberries. Research in the Irish context is urgently required

Practical design of gamma irradiation facility

International Nuclear Information System (INIS)

Sugimoto, Sen-ichi

1976-01-01

In this report, it is intended to describe mainly the multi-purpose irradiation facilities which carry out the consigned irradiation for the sterilization of medical apparatuses, which is most of the demand of gamma irradiation in Japan. Gamma irradiation criterion is summed up to that ''Apply the specified dose properly and uniformly to product cases and be economic.'' Though the establishment of the design standard for irradiation facilities is not easy and is not solve simply, the factors to be considered in the design are as follows: (1) mechanism safety, (2) multipurpose irradiation structure, (3) irradiation criteria and practice, (4) efficiency of radiation source utilization and related problems, and (5) economical merit. Irradiation facilities are generally itemized as follows: irradiation equipments, radiation source-storing facility, package carrier, radiation source-driving equipments, facilities for safety and operational management and others. Examples and their characteristics are reported for the facilities of Japan Radio-isotope Irradiation Cooperative Association and Radie Industries Ltd. Expenses for construction, processing and radiation sources are shown on the basis of a few references, and the cost trially calculated under a certain presumptive condition is given. (Wakatsuki, Y.)

Global Reference Tables for Management Information Systems

Data.gov (United States)

Social Security Administration — This database is a collection of reference tables that store common information used throughout SSA. These tables standardize code structures and code usage of SSA...

Forecasting Global Horizontal Irradiance Using the LETKF and a Combination of Advected Satellite Images and Sparse Ground Sensors

Science.gov (United States)

Harty, T. M.; Lorenzo, A.; Holmgren, W.; Morzfeld, M.

2017-12-01

The irradiance incident on a solar panel is the main factor in determining the power output of that panel. For this reason, accurate global horizontal irradiance (GHI) estimates and forecasts are critical when determining the optimal location for a solar power plant, forecasting utility scale solar power production, or forecasting distributed, behind the meter rooftop solar power production. Satellite images provide a basis for producing the GHI estimates needed to undertake these objectives. The focus of this work is to combine satellite derived GHI estimates with ground sensor measurements and an advection model. The idea is to use accurate but sparsely distributed ground sensors to improve satellite derived GHI estimates which can cover large areas (the size of a city or a region of the United States). We use a Bayesian framework to perform the data assimilation, which enables us to produce irradiance forecasts and associated uncertainties which incorporate both satellite and ground sensor data. Within this framework, we utilize satellite images taken from the GOES-15 geostationary satellite (available every 15-30 minutes) as well as ground data taken from irradiance sensors and rooftop solar arrays (available every 5 minutes). The advection model, driven by wind forecasts from a numerical weather model, simulates cloud motion between measurements. We use the Local Ensemble Transform Kalman Filter (LETKF) to perform the data assimilation. We present preliminary results towards making such a system useful in an operational context. We explain how localization and inflation in the LETKF, perturbations of wind-fields, and random perturbations of the advection model, affect the accuracy of our estimates and forecasts. We present experiments showing the accuracy of our forecasted GHI over forecast-horizons of 15 mins to 1 hr. The limitations of our approach and future improvements are also discussed.

Studies on cutaneous lipid peroxide with special reference to the influences of ultraviolet irradiation

International Nuclear Information System (INIS)

Nomura, Kazuo

1981-01-01

The purpose of this study was to investigate the participation of lipid peroxide (LP) in some skin damages due to ultraviolet (UV) irradiation. Results obtained were as follows. 1) Long wave UV (UVA) was irradiated to rat skin homogenates. The levels of LP increased linearly with irradiation time. 2) When 8-methoxypsoralen was added to the homogenates prior to UVA irradiation, however, the LP levels showed no increase. 3) Various anti-oxidative agents were added to homogenates and UVA was irradiated. Only Vit. E reduced the LP levels in proportion to its concentrations. 4) Anti-oxidative agents were given to rats which were then exposed to PUVA (8-methoxypsoralen plus UVA) treatment. Among them, administration of Vit. E and pantethine was associated with reduction of serum and cutaneous LP levels with only slight histologic changes in the involved skin. 5) Vit. E deficient rats were treated with PUVA. In these models, cutaneous LP levels raised from 24 hours to 96 hours after PUVA treatment and histologic changes such as vacuolization, blister formation and cell degeneration were remarkable. From the above data, it became evident that lipid peroxidation took place in skin tissue per se and even in the UVA wave length region. After PUVA treatment, cutaneous LP levels relatively well correlated with histologic changes of the involved skin. The results suggested that LP played a certain role in skin damages due to UV. (author)

Advantage of irradiation in food industry, technical and economical constraints

International Nuclear Information System (INIS)

Dupuy, P.

1986-01-01

Irradiation is an effective method to extend the conservation and to increase the hygienic security of food. Nevertheless the use of irradiation remains limited in food industry. The prospects of different applications are evaluated, referring to the other alternative technologies. The advantage of adequate irradiation facilities incorporated or not into the plants are compared [fr

Irradiation behaviors of coated fuel particles, (3)

International Nuclear Information System (INIS)

Fukuda, Kousaku; Kashimura, Satoru; Iwamoto, Kazumi; Ikawa, Katsuichi

1980-07-01

This report is concerning to the irradiation experiments of the coated fuel particles, which were performed by 72F-6A and 72F-7A capsules in JMTR. The coated particles referred to the preliminary design of VHTR were prepared for the experiments in 1972 and 1973. 72F-6A capsule was irradiated at G-10 hole of JMTR fuel zone for 2 reactor cycles, and 72F-7A capsule had been planned to be irradiated at the same irradiation hole before 72F-6A. However, due to slight leak of the gaseous fission products into the vacuum system controlling irradiation temperature, irradiation of 72F-7A capsule was ceased after 85 hrs since the beginning. In the post irradiation examination, inspection to surface appearance, ceramography, X-ray microradiography and acid leaching for the irradiated particle samples were made, and crushing strength of the two particle samples was measured. (author)

A Global Terrestrial Reference Frame from simulated VLBI and SLR data in view of GGOS

Science.gov (United States)

Glaser, Susanne; König, Rolf; Ampatzidis, Dimitrios; Nilsson, Tobias; Heinkelmann, Robert; Flechtner, Frank; Schuh, Harald

2017-07-01

In this study, we assess the impact of two combination strategies, namely local ties (LT) and global ties (GT), on the datum realization of Global Terrestrial Reference Frames in view of the Global Geodetic Observing System requiring 1 mm-accuracy. Simulated Very Long Baseline Interferometry (VLBI) and Satellite Laser Ranging (SLR) data over a 7 year time span was used. The LT results show that the geodetic datum can be best transferred if the precision of the LT is at least 1 mm. Investigating different numbers of LT, the lack of co-located sites on the southern hemisphere is evidenced by differences of 9 mm in translation and rotation compared to the solution using all available LT. For the GT, the combination applying all Earth rotation parameters (ERP), such as pole coordinates and UT1-UTC, indicates that the rotation around the Z axis cannot be adequately transferred from VLBI to SLR within the combination. Applying exclusively the pole coordinates as GT, we show that the datum can be transferred with mm-accuracy within the combination. Furthermore, adding artificial stations in Tahiti and Nigeria to the current VLBI network results in an improvement in station positions by 13 and 12%, respectively, and in ERP by 17 and 11%, respectively. Extending to every day VLBI observations leads to 65% better ERP estimates compared to usual twice-weekly VLBI observations.

Wholesomeness and safety of irradiated foods

International Nuclear Information System (INIS)

Swallow, A.J.

1991-01-01

Irradiation with gamma-rays, X-rays or fast electrons can be used to change foodstuffs in beneficial ways or to destroy harmful organisms. Gamma rays do not induce radioactivity in foods, but X-rays and fast electrons can induce short lived radioactivity if sufficiently energetic. This imposes limitations on the energies which can be used, and a short wait between irradiation and consumption may be advisable. Irradiation produces chemical changes in foodstuffs, and some foods are unsuitable for irradiation. With appropriate foods, trials with animals and human volunteers generally show that the product is safe. Some loss in nutritional quality can take place, which could be significant for some individuals, but are unlikely to be important for those on a balanced diet. Irradiation does not eliminate all risk from microbial contamination. Foods to be irradiated should be good quality, and need to be kept under proper conditions after irradiation. Irradiated foods should be appropriately labelled. Tests for radiation would help to enforce necessary controls. If the process is properly carried out on appropriate foods, and all due precautions are taken, irradiated foods are wholesome and safe. 52 references

Radiation facilities and irradiation technology for food irradiation

International Nuclear Information System (INIS)

Sunaga, Hiromi

2005-01-01

Progress made during these 30 years in the field of radiation treatment of food is reviewed by describing features of the process including elementary processes, quality control of the products and the dosimetric techniques widely employed. The Co-60 gamma-ray irradiation facilities to be used for radiation-sterilization of medical supplies and food preservation are presented. For electron beam irradiation, accelerators for processing with the energy from 0.3 to 10 MeV are generally employed. The electron-guns, the method of acceleration such as rectification, types of acceleration as Cockcroft-Walton, dynamitron, or linear acceleration and X-ray producing facility, with various countermeasures for safety management, are briefly explained. The concepts of dose and traceability are given. The dosimeters including reference dosimeter and routine ones with validation are explained. (S. Ohno)

Uncertainty Estimate of Surface Irradiances Computed with MODIS-, CALIPSO-, and CloudSat-Derived Cloud and Aerosol Properties

Science.gov (United States)

Kato, Seiji; Loeb, Norman G.; Rutan, David A.; Rose, Fred G.; Sun-Mack, Sunny; Miller, Walter F.; Chen, Yan

2012-07-01

Differences of modeled surface upward and downward longwave and shortwave irradiances are calculated using modeled irradiance computed with active sensor-derived and passive sensor-derived cloud and aerosol properties. The irradiance differences are calculated for various temporal and spatial scales, monthly gridded, monthly zonal, monthly global, and annual global. Using the irradiance differences, the uncertainty of surface irradiances is estimated. The uncertainty (1σ) of the annual global surface downward longwave and shortwave is, respectively, 7 W m-2 (out of 345 W m-2) and 4 W m-2 (out of 192 W m-2), after known bias errors are removed. Similarly, the uncertainty of the annual global surface upward longwave and shortwave is, respectively, 3 W m-2 (out of 398 W m-2) and 3 W m-2 (out of 23 W m-2). The uncertainty is for modeled irradiances computed using cloud properties derived from imagers on a sun-synchronous orbit that covers the globe every day (e.g., moderate-resolution imaging spectrometer) or modeled irradiances computed for nadir view only active sensors on a sun-synchronous orbit such as Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation and CloudSat. If we assume that longwave and shortwave uncertainties are independent of each other, but up- and downward components are correlated with each other, the uncertainty in global annual mean net surface irradiance is 12 W m-2. One-sigma uncertainty bounds of the satellite-based net surface irradiance are 106 W m-2 and 130 W m-2.

AGR 3/4 Irradiation Test Final As Run Report

Energy Technology Data Exchange (ETDEWEB)

Collin, Blaise P. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-06-01

Several fuel and material irradiation experiments have been planned for the Idaho National Laboratory Advanced Reactor Technologies Technology Development Office Advanced Gas Reactor Fuel Development and Qualification Program (referred to as the INL ART TDO/AGR fuel program hereafter), which supports the development and qualification of tristructural-isotropic (TRISO) coated particle fuel for use in HTGRs. The goals of these experiments are to provide irradiation performance data to support fuel process development, qualify fuel for normal operating conditions, support development and validation of fuel performance and fission product transport models and codes, and provide irradiated fuel and materials for post irradiation examination and safety testing (INL 05/2015). AGR-3/4 combined the third and fourth in this series of planned experiments to test TRISO coated low enriched uranium (LEU) oxycarbide fuel. This combined experiment was intended to support the refinement of fission product transport models and to assess the effects of sweep gas impurities on fuel performance and fission product transport by irradiating designed-to-fail fuel particles and by measuring subsequent fission metal transport in fuel-compact matrix material and fuel-element graphite. The AGR 3/4 fuel test was successful in irradiating the fuel compacts to the burnup and fast fluence target ranges, considering the experiment was terminated short of its initial 400 EFPD target (Collin 2015). Out of the 48 AGR-3/4 compacts, 42 achieved the specified burnup of at least 6% fissions per initial heavy-metal atom (FIMA). Three capsules had a maximum fuel compact average burnup < 10% FIMA, one more than originally specified, and the maximum fuel compact average burnup was <19% FIMA for the remaining capsules, as specified. Fast neutron fluence fell in the expected range of 1.0 to 5.5×1025 n/m2 (E >0.18 MeV) for all compacts. In addition, the AGR-3/4 experiment was globally successful in keeping the

Global trends in radiation processing

International Nuclear Information System (INIS)

Defalco, Gerry

2002-01-01

A global leader in radioisotope technology with three business units: - Nuclear Medicine supplies about two-thirds of the world requirements for molybdenum-99 and other isotopes used to diagnose disease - Radiation Therapy business unit supplied more than over 2,300 cobalt cancer treatment machines and is a leader in treatment planning - Ion Technologies is the world's leading supplier of cobalt 60 and innovative gamma irradiation systems About Ion Technologies · Supply over 70% of world's cobalt-60 sources · Custom-designed and built irradiation systems · Comprehensive engineering, physics, logistics, installation and marketing services · Canadian Irradiation Center for unique 'hands on' training, R and D product irradiation

Intracranial meningiomas after high-dose irradiation

International Nuclear Information System (INIS)

Soffer, D.; Gomori, J.M.; Siegal, T.; Shalit, M.N.

1989-01-01

Three patients who presented with intracranial meningiomas 12, 15, and 20 years, respectively, after therapeutic high-dose irradiation of a primary brain tumor are described. Analysis of these cases and similar documented cases suggests that meningiomas after high-dose irradiation constitute a recognizable entity. Patients with such tumors received radiation therapy at a young age (mean age, 9.4 years). After a latent period of 2 to 47 years (mean, 19.8 years) they developed meningiomas at the site of irradiation, at a much younger age than patients with ''spontaneous'' meningiomas. Similar to the situation with meningiomas after low-dose irradiation, a relatively high proportion of meningiomas induced by high-dose irradiation tend to be malignant and biologically aggressive. A very young age at the time of irradiation seems to predispose to the induction of malignant meningiomas, rather than benign tumors. These unusual features provide indirect evidence that high-dose radiation may play a role in the pathogenesis of meningiomas.41 references

Measuring Broadband IR Irradiance in the Direct Solar Beam and Recent Developments

Energy Technology Data Exchange (ETDEWEB)

Reda, Ibrahim; Andreas, Afshin; Dooraghi, Mike; Habte, Aron; Sengupta, Manajit; Kutchenreiter, Mark

2016-12-14

Solar and atmospheric science radiometers such as pyranometers, pyrheliometers, and photovoltaic cells are calibrated with traceability to a consensus reference which is maintained by Absolute Cavity Radiometers (ACRs). An ACR is an open cavity with no window, developed to measure the extended broadband spectrum of the terrestrial direct solar beam irradiance that extends beyond the ultraviolet and infrared bands; i.e. below 0.2 um and above 50 um, respectively. On the other hand, the pyranometers and pyrheliometers were developed to measure broadband shortwave irradiance from approximately 0.3 um to 3 um, while the present photovoltaic cells are limited to the spectral range of approximately 0.3 um to 1 um. The broadband mismatch of ACR versus such radiometers causes discrepancy in radiometers' calibration methods that has not been discussed or addressed in the solar and atmospheric science literature. Pyrgeometers, which measure the atmospheric longwave irradiance, are also used for solar and atmospheric science applications and calibrated with traceability to a consensus reference, yet they are calibrated during nighttime only, because no consensus reference has been established for the daytime longwave irradiance. This poster describes a method to measure the broadband longwave irradiance in the terrestrial direct solar beam from 3 um to 50 um, as a first step that might be used to help develop calibration methods to address the mismatch between broadband ACR and shortwave radiometers, and the lack of a daytime reference for pyrgeometers. The described method is used to measure the irradiance from sunrise to sunset; the irradiance varied from approximately 1 Wm-2 to 16 Wm-2 with an estimated uncertainty of 1.5 Wm-2, for a solar zenith angle range from 80 degrees to 16 degrees, respectively. Recent development shows that there is greater than 1.1 percent bias in measuring shortwave solar irradiance.

Potential for improvement in estimation of solar diffuse irradiance

International Nuclear Information System (INIS)

Muneer, T.; Munawwar, S.

2006-01-01

Most of the meteorological stations around the world measure global irradiation and provide information on weather elements. Diffuse radiation measurement, however, is unavailable for many of those sites. This accentuates the need to estimate it whereupon it can be used for the simulation of solar applications. This paper explores the role of synoptic information, e.g. sunshine fraction, cloud cover and air mass on the basic k-k t relationship for nine sites across the globe. The influence on the k-k t regressions is studied qualitatively, and the inclusion of these parameters is suggested based on that. Thus, it is recommended to use the complementary data usually provided with the database apart from the global irradiation in order to estimate the diffuse irradiation more accurately. It was found by analysing each synoptic parameter individually that while the sunshine fraction showed a strong bearing, it was followed closely by cloud cover. Air mass, on the other hand, was found to be a weak parameter for general estimation of diffuse radiation. It was concluded that air mass if coupled with other synoptic parameters might improve the estimation accuracy, but it does not show much promise on its own when used with the global irradiation

The modelling of irradiation-enhanced phosphorus segregation in neutron irradiated reactor pressure vessel submerged-arc welds

Energy Technology Data Exchange (ETDEWEB)

Druce, S.G.; English, C.A.; Foreman, A.J.E.; McElroy, R.J.; Vatter, I.A. [AEA Technology, Didcot (United Kingdom). Harwell Lab.; Bolton, C.J.; Buswell, J.T.; Jones, R.B. [Nuclear Electric, Berkeley (United Kingdom). Berkeley Technology Centre

1996-12-31

Recent results on neutron-irradiated RPV submerged-arc welds have revealed grain boundary segregation of phosphorus during irradiation, which may lead to intergranular fracture. However, the experimental database is insufficient to define the dependence of the process on variables such ad dose, dose-rate and temperature. This paper describes work in which two existing models of phosphorus segregation, under thermal or irradiation conditions, have been developed to obtain predictions of these dependencies. The critical parameters in the models have been adjusted to give consistency with the available reference data, and predictions have been made of the dependence of segregation on a number of variables.

A Reference Architecture for Providing Tools as a Service to Support Global Software Development

DEFF Research Database (Denmark)

Chauhan, Aufeef

2014-01-01

-computing paradigm for addressing above-mentioned issues by providing a framework to select appropriate tools as well as associated services and reference architecture of the cloud-enabled middleware platform that allows on demand provisioning of software engineering Tools as a Service (TaaS) with focus......Global Software Development (GSD) teams encounter challenges that are associated with distribution of software development activities across multiple geographic regions. The limited support for performing collaborative development and engineering activities and lack of sufficient support......-based solutions. The restricted ability of the organizations to have desired alignment of tools with software engineering and development processes results in administrative and managerial overhead that incur increased development cost and poor product quality. Moreover, stakeholders involved in the projects have...

Effect of irradiation on acrylic cement with special reference to fixation of pathological fractures

International Nuclear Information System (INIS)

Eftekhar, N.S.; Thurston, C.W.

1975-01-01

Self-curing cement is generally used in conjunction with conventional metallic devices. If the acrylic cement was supplemented, the primary goal would be a rigid immobiliztion of the fracture to alleviate the pain; usually, however, the final aim is toward osteosynthesis. During the course of rehabilitation, it is often desirous to supplement the treatment by irradiation. Although the industrial, dental and surgical literature has adequately dealt with many aspects of bone cement; for example, physical and chemical properties in joint replacement, and so on, the effects of irradiation on the acrylic cement have not been previously reported. It is the purpose of this paper to analyze the experimental studies conducted to evaluate the mechanical properties of the polymethylmethacrylate when subjected to irradiation within a maximum range of a therapeutic dose

Study of damages by neutron irradiation in lithium aluminates

International Nuclear Information System (INIS)

Palacios G, O.

1999-01-01

Lithium aluminates proposed to the production of tritium in fusion nuclear reactors, due to the thermal stability that they present as well as the behavior of the aluminium to the irradiation. As a neutron flux with profile (≅ 14 Mev) of a fusion reactor is not available. A irradiation experiment was designed in order to know the micro and nano structure damages produced by fast and thermal neutrons in two irradiation positions of the fusion nuclear reactor Triga Mark III: CT (Thermal Column) and SIFCA (System of Irradiation Fixed of Capsules). In this work samples of lithium aluminate were characterized by XRD (X-Ray Diffraction), TEM (Transmission Electron Microscopy) and SEM (Scanning Electron Microscopy). Two samples were prepared by two methods: a) coalition method and b) peroxide method. This characterization comprised original and irradiated samples. The irradiated sample amounted to 4 in total: one for each preparation method and one for each irradiation position. The object of this analysis was to correlate with the received neutron dose the damages suffered by the samples with the neutron irradiation during long periods (440 H), in their micro and nano structure aspects; in order to understand the changes as a function of the irradiation zone (with thermal and fast neutron flux) and the preparation methods of the samples and having as an antecedent the irradiation in SIFCA position by short times (2h). The obtained results are referred to the stability of γ -aluminate phase, under given conditions of irradiation and defined nano structure arrangement. They also refer to the proposals of growth mechanism and nucleation of new phases. The error associated with the measurement of neutron dose is also discussed. (Author)

The recent multi-ethnic global lung initiative 2012 (GLI2012) reference values don't reflect contemporary adult's North African spirometry.

Science.gov (United States)

Ben Saad, Helmi; El Attar, Mohamed Nour; Hadj Mabrouk, Khaoula; Ben Abdelaziz, Ahmed; Abdelghani, Ahmed; Bousarssar, Mohamed; Limam, Khélifa; Maatoug, Chiraz; Bouslah, Hmida; Charrada, Ameur; Rouatbi, Sonia

2013-12-01

The applicability of the recent multi-ethnic reference equations derived by the ERS Global Lung Initiative (ERS/GLI) in interpreting spirometry data in North African adult subjects has not been studied. To ascertain how well the recent ERS/GLI reference equations fit contemporary adult Tunisian spirometric data. Spirometric data were recorded from 1192 consecutive spirometry procedures in adults aged 18-60 years. Reference values and lower limits of normality (LLN) were calculated using the local and the ERS/GLI reference equations. Applied definitions: large airway obstructive ventilatory defect (LAOVD): FEV1/FVC contemporary Tunisian spirometry. Using Tunisian reference equations, 71.31%, 6.71% and 19.04% of spirometry records were interpreted as normal, and as having, LAOVD and TRVD, respectively. Using the ERS/GLI reference equations, these figures were respectively, 85.82%, 4.19% and 8.39%. The mean ± SD Z-scores for the contemporary healthy North African subject's data were -0.55 ± 0.87 for FEV1, -0.62 ± 0.86 for FVC and 0.10 ± 0.73 for FEV1/FVC. The present study don't recommend the use of the recent ERS/GLI reference equations to interpret spirometry in North African adult population. Copyright © 2013 Elsevier Ltd. All rights reserved.

Prediction of diffuse solar irradiance using machine learning and multivariable regression

International Nuclear Information System (INIS)

Lou, Siwei; Li, Danny H.W.; Lam, Joseph C.; Chan, Wilco W.H.

2016-01-01

Highlights: • 54.9% of the annual global irradiance is composed by its diffuse part in HK. • Hourly diffuse irradiance was predicted by accessible variables. • The importance of variable in prediction was assessed by machine learning. • Simple prediction equations were developed with the knowledge of variable importance. - Abstract: The paper studies the horizontal global, direct-beam and sky-diffuse solar irradiance data measured in Hong Kong from 2008 to 2013. A machine learning algorithm was employed to predict the horizontal sky-diffuse irradiance and conduct sensitivity analysis for the meteorological variables. Apart from the clearness index (horizontal global/extra atmospheric solar irradiance), we found that predictors including solar altitude, air temperature, cloud cover and visibility are also important in predicting the diffuse component. The mean absolute error (MAE) of the logistic regression using the aforementioned predictors was less than 21.5 W/m"2 and 30 W/m"2 for Hong Kong and Denver, USA, respectively. With the systematic recording of the five variables for more than 35 years, the proposed model would be appropriate to estimate of long-term diffuse solar radiation, study climate change and develope typical meteorological year in Hong Kong and places with similar climates.

Globalization and democracy with reference to eastern and southern ...

African Journals Online (AJOL)

Globalization has caused anxiety and uncertainty among the less developed countries; the reason being that it is still unclear as what this new political economy portends for these countries. Also at the heart of this unease is what seems to be globalization's profound political and social consequences for the Third World ...

UV Irradiance Enhancements by Scattering of Solar Radiation from Clouds

Directory of Open Access Journals (Sweden)

Uwe Feister

2015-08-01

Full Text Available Scattering of solar radiation by clouds can reduce or enhance solar global irradiance compared to cloudless-sky irradiance at the Earth’s surface. Cloud effects to global irradiance can be described by Cloud Modification Factors (CMF. Depending on strength and duration, irradiance enhancements affect the energy balance of the surface and gain of solar power for electric energy generation. In the ultraviolet region, they increase the risk for damage to living organisms. Wavelength-dependent CMFs have been shown to reach 1.5 even in the UV-B region at low altitudes. Ground-based solar radiation measurements in the high Andes region at altitudes up to 5917 m a.s.l showed cloud-induced irradiance enhancements. While UV-A enhancements were explained by cloud scattering, both radiation scattering from clouds and Negative Ozone Anomalies (NOA have been discussed to have caused short-time enhancement of UV-B irradiance. Based on scenarios using published CMF and additional spectroradiometric measurements at a low-altitude site, the contribution of cloud scattering to the UV-B irradiance enhancement in the Andes region has been estimated. The range of UV index estimates converted from measured UV-B and UV-A irradiance and modeled cloudless-sky ratios UV-B/erythemal UV is compatible with an earlier estimate of an extreme UV index value of 43 derived for the high Andes.

Analysis of volatiles from irradiated yeast extract

International Nuclear Information System (INIS)

Liao Tao; Li Xin; Zu Xiaoyan; Chen Yuxia; Geng Shengrong

2013-01-01

The method for determination volatiles from irradiated yeast extract (YE) using headspace solid phase microextraction (HS-SPME) and gas chromatography-mass spectrometry (GC-MS) was developed in this paper. The extraction conditions were optimized with reference to the peak area and number of volatiles as aldehyde, ketone, alcohol, acid, ester and sulfur compounds. The optimized conditions of HS-SPME for volatiles in irradiated YE were: divinyl benzene/Carboxen/polydimethylsiloxane (DVB/CAR/PDMS) fiber, extration time 40 min, extraction temperature 40℃. The volatiles from YE irradiated by 0-19.8 kGy were detected using HS-SPME coupled with GC-MS. The results showed that only 15 volatiles were detected from no irradiated YE and main compounds were acetic acid, 2, 3-butanediol and 1-hexanol, 2-ethyl-. There were 40 volatiles detected from irradiated YE and the main compounds were acetic acid, phenylethyl alcohol, heptanal and nonanal. Compare to no irradiated yeast extract, the aldehyde, ketone, alkene and disulfide, dimethyl were produced by irradiating process. (authors)

Global cerebral blood flow changes measured by brain perfusion SPECT immediately after whole brain irradiation

International Nuclear Information System (INIS)

Ohtawa, Nobuyuki; Machida, Kikuo; Honda, Norinari; Hosono, Makoto; Takahashi, Takeo

2003-01-01

Whole brain irradiation (WBI) is still a major treatment option for patients with metastatic brain tumor despite recent advances in chemotherapy and newer techniques of radiation therapy. Cerebral blood flow (CBF) of changes induced by whole brain radiation is not fully investigated, and the aim of the study was to measure CBF changes non-invasively with brain perfusion SPECT to correlate with treatment effect or prognosis. Total of 106 patients underwent WBI during April 1998 to March 2002. Both brain MRI and brain perfusion SPECT could be performed before (less than 1 week before or less than 10 Gy of WBI) and immediately after (between 1 week before and 2 weeks after the completion of WBI) the therapy in 17 of these patients. They, 10 men and 7 women, all had metastatic brain tumor with age range of 45 to 87 (mean of 61.4) years. Tc-99m brain perfusion agent (HMPAO in 4, ECD in 13) was rapidly administered in a 740-MBq dose to measure global and regional CBF according to Matsuda's method, which based on both Patlak plot and Lassens' linearity correction. Brain MRI was used to measure therapeutic response according to World Health Organization (WHO) classification as complete remission (CR), partial response (PR), no change (NC), and progressive disease (PD). Survival period was measured from the completion of WBI. Mean global CBF was 40.6 and 41.5 ml/100 g/min before and immediately after the WBI, respectively. Four patients increased (greater than 10%) their global mean CBF, 10 unchanged (less than 10% increase or decrease), and 3 decreased after the WBI. The WBI achieved CR in none, PR in 8, NC in 6, and PD in 3 on brain MRI. Change in global mean CBF (mean±SD) was significantly larger in PR (4.3±2.0 ml/100 g/min, p=0.002) and in NC (-0.1±4.5) than in PD (-3.9±6.4, P=0.002, P=0.016, respectively). Survival was not significantly (p>0.05) different among the patients with CR (20 weeks), NC (48 weeks), and PD (21 weeks). Change in global CBF and survival was

Measurements of integrated direct, diffuse and global ultraviolet-B radiation

International Nuclear Information System (INIS)

Utrillas, M.P.; Pedrós, R.; Gandía, S.; Gómez-Amo, J.L.; Estellés, V.; Martínez-Lozano, J.A.

2015-01-01

We present the first multiyear set of simultaneous measurements of the global ultraviolet-B radiation and its two components: direct and diffuse. The measurements have been taken with four YES-UVB-1 radiometers: two radiometers to measure the diffuse radiation, one provided with a shadow band and the other with a shadow disk on a Sun tracker; a radiometer to measure the global horizontal radiation; and a Sun-tracking radiometer to measure the direct radiation with an especially designed radiance collimator. The diffuse minute-values measured with both instruments agree within a coefficient correlation of 1.00. The diffuse component represents at least 50% of the global UVB (ultraviolet-B) radiation. The minute values of global UVB irradiance obtained by adding the direct and diffuse components concur with the measured global irradiance. Therefore, the measurement of the direct irradiance enables the estimation of the diffuse component, and gives an insight into the factors that affect its value, especially aerosols. - Highlights: • Simultaneous measurements of global, direct and diffuse UVB (ultraviolet-B) radiation. • The diffuse minute-values are at least 50% of the global ones. • The diffuse measurements are highly correlated to the aerosol load. • The sum of direct + diffuse radiation concur with the measured global.

Improvements of top-of-atmosphere and surface irradiance computations with CALIPSO-, CloudSat-, and MODIS-derived cloud and aerosol properties

Science.gov (United States)

Kato, Seiji; Rose, Fred G.; Sun-Mack, Sunny; Miller, Walter F.; Chen, Yan; Rutan, David A.; Stephens, Graeme L.; Loeb, Norman G.; Minnis, Patrick; Wielicki, Bruce A.; Winker, David M.; Charlock, Thomas P.; Stackhouse, Paul W., Jr.; Xu, Kuan-Man; Collins, William D.

2011-10-01

One year of instantaneous top-of-atmosphere (TOA) and surface shortwave and longwave irradiances are computed using cloud and aerosol properties derived from instruments on the A-Train Constellation: the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) on the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) satellite, the CloudSat Cloud Profiling Radar (CPR), and the Aqua Moderate Resolution Imaging Spectrometer (MODIS). When modeled irradiances are compared with those computed with cloud properties derived from MODIS radiances by a Clouds and the Earth's Radiant Energy System (CERES) cloud algorithm, the global and annual mean of modeled instantaneous TOA irradiances decreases by 12.5 W m-2 (5.0%) for reflected shortwave and 2.5 W m-2 (1.1%) for longwave irradiances. As a result, the global annual mean of instantaneous TOA irradiances agrees better with CERES-derived irradiances to within 0.5W m-2 (out of 237.8 W m-2) for reflected shortwave and 2.6W m-2 (out of 240.1 W m-2) for longwave irradiances. In addition, the global annual mean of instantaneous surface downward longwave irradiances increases by 3.6 W m-2 (1.0%) when CALIOP- and CPR-derived cloud properties are used. The global annual mean of instantaneous surface downward shortwave irradiances also increases by 8.6 W m-2 (1.6%), indicating that the net surface irradiance increases when CALIOP- and CPR-derived cloud properties are used. Increasing the surface downward longwave irradiance is caused by larger cloud fractions (the global annual mean by 0.11, 0.04 excluding clouds with optical thickness less than 0.3) and lower cloud base heights (the global annual mean by 1.6 km). The increase of the surface downward longwave irradiance in the Arctic exceeds 10 W m-2 (˜4%) in winter because CALIOP and CPR detect more clouds in comparison with the cloud detection by the CERES cloud algorithm during polar night. The global annual mean surface downward longwave irradiance of

Study of effective factors in detection of irradiated food using thermoluminescence based on the models of reference minerals

International Nuclear Information System (INIS)

Miyahara, Makoto; Sugi, Eriko; Katoh, Takashi; Hironiwa, Takayuki; Sunaga, Hiromi; Luo, Ling Z.

2012-01-01

In the thermoluminescence (TL) detection method for irradiated foods, accurate standards have been developed for detecting irradiated foods. The standard method describes that emission maximum temperature (T1i) and TL ratio for non-heated or non-mixed sample can be in the range of 150–250 °C and more than 0.1, respectively, when it was irradiated food. But when irradiated food is heated up to 200 °C, or mixed up with non-irradiated stuffs, T1i and TL ratio would not drop in the range. Here we examined the effects of the two processes, heating and mixing with non-irradiated food, on T1i and G1/G1k ratio (ratio of G1 and average G1 for 1-kGy-irradiated JF2, this value is modeled after TL ratio) using a model consisting of irradiated and non-irradiated geochemical standards of feldspar (JF1, JF2, PF, etc.). T1i temperatures for irradiated JF1, JF2, and PF ranged from 163 to 175 °C, while those for the non-irradiated JF2 ranged from 253 to 263 °C. T1i temperatures for 5-kGy-irradiated and preheated JF2 for 10 s, 20 s, and 30 s at 180 °C were 215, 225, and 231 °C, respectively. When JF2 was irradiated from 100 Gy to 5 kGy, the T1i was almost constant at any doses. G1/G1k ratios at 100, 200, and 500 Gy were 0.15, 0.23, and 0.60, respectively. G1/G1k ratio was proportional to the given dose at the integration temperature ranges. The TS sample, which originated from farm soil in Tanegashima Island, gave the same results as JF2. T1is for 5-kGy-irradiated and preheated JF2 for 20 s at 150, 180, and 200 °C were 197, 225, and 246 °C, respectively. Longer and higher preheating resulted in higher T1i. Longer and higher preheating extremely reduced the G1/G1k ratio, and in some cases the ratio was less than 0.1. This means TL ratio is useless in determination of the standard for irradiated food. Peak temperatures for JF2 in mixture of 5-kGy-irradiated to non-irradiated (1.25–5%) were 261–263 °C (non-irradiated portion, T1n) and 177–180 °C (irradiated portion T1i

Swelling and irradiation creep of neutron irradiated 316Ti and 15-15Ti steels

International Nuclear Information System (INIS)

Maillard, A.; Touron, H.; Seran, J.L.; Chalony, A.

1992-01-01

The global behavior, the swelling and irradiation creep resistances of cold worked 316Ti and 15-15Ti, two variants of austenitic steels in use as core component materials of the French fast reactors, are compared. The 15-15Ti leads to a significant improvement due to an increase in the incubation dose swelling. The same phenomena observed on 316Ti are found on 15-15Ti. All species without fuel like samples, wrappers or empty clad swell and creep less than fuel pin cladding irradiated in the same conditions. To explain the swelling difference, as for 316Ti, thermal gradient is also invoked but the irradiation creep difference is not yet clearly understood. To predict the behavior of clads it is indispensable to study the species themselves and to use specific rules. All results confirm the good behavior of 15-15Ti, the best behavior being obtained with the 1% Si doped version irradiated up to 115 dpa

Incidence of hypothyroidism after irradiation of the neck with special reference to lymphoma patients

International Nuclear Information System (INIS)

Feyerabend, T.; Kapp, B.; Richter, E.; Becker, W.; Reiners, C.; Wuerzburg Univ.

1990-01-01

Twenty-eight patients were studied prospectively in order to determine the incidence of hypothyroidism after mantle irradiation for malignant lymphoma. This group was compared with a historical group of 65 patients, among them 36 patients with malignant lymphoma. The mean follow-up was 30 months for the prospective group and 46 months for the retrospective group. The mean thyroid dose for irradiated malignant lymphomas in the prospective and the retrospective group was 45 Gy and 43 Gy respectively. For other tumors with neck irradiation (retrospective group) the mean thyroid dose was 53 Gy. There were no cases of clinical hypothyroidism in our study. As for subclinical hypothyroidism which is characterised by elevated TSH, the incidence was 22% in the prospective group and 3% in the retrospective group, i.e. 8/93 patients showed a hypothyroid dysfunction. Three of the 8 patients with subclinical hypothyroidism had undergone lymphangiography before radiotherapy. Due to the elevated iodine pool a lymphangiogram is considered as a risk factor for hypothyroidism as well as for hyperthyroidism, which we observed twice in the prospective group. Evaluation of the thyroid function before lymphangiography and irradiation as well as regular thyroid function studies during the follow-up are recommended in order to detect hypothyroidism in time. (orig.)

Solar irradiance forecasting at one-minute intervals for different sky conditions using sky camera images

International Nuclear Information System (INIS)

Alonso-Montesinos, J.; Batlles, F.J.; Portillo, C.

2015-01-01

Highlights: • The solar resource has been predicted for three hours at 1-min intervals. • Digital image levels and cloud motion vectors are joint for irradiance forecasting. • The three radiation components have been predicted under different sky conditions. • Diffuse and global radiation has an nRMSE value around 10% in all sky conditions. • Beam irradiance is predicted with an nRMSE value of about 15% in overcast skies. - Abstract: In the search for new techniques to predict atmospheric features that might be useful to solar power plant operators, we have carried out solar irradiance forecasting using emerging sky camera technology. Digital image levels are converted into irradiances and then the maximum cross-correlation method is applied to obtain future predictions. This methodology is a step forward in the study of the solar resource, essential to solar plant operators in adapting a plant’s operating procedures to atmospheric conditions and to improve electricity generation. The results are set out using different statistical parameters, in which beam, diffuse and global irradiances give a constant normalized root-mean-square error value over the time interval for all sky conditions. The average measure is 25.44% for beam irradiance; 11.60% for diffuse irradiance and 11.17% for global irradiance.

Manual of food irradiation dosimetry

International Nuclear Information System (INIS)

1977-01-01

Following items are discussed: Fundamentals of dosimetry; description of irradiators; dose distribution in the product and commissioning the process; plant operation and process control; detailed instructions on using various dose-meter systems; references; glossary of some basic terms and concepts

The Wunstorf Drilling Project: Coring a Global Stratigraphic Reference Section of the Oceanic Anoxic Event 2

Directory of Open Access Journals (Sweden)

Markus Wilmsen

2007-03-01

Full Text Available The Wunstorf drilling project aims at establishing a high resolution stable isotope record for the black shale succession (OAE 2 of the CTBI and developing this into a globally applicable high resolutionbio- and chemostratigraphic reference section. Disciplines involved include micropaleontology (calcareous nannofossils, planktonic foraminifera, macropaleontology (ammonites, inoceramids, stable isotopes and cyclostratigraphy mainly based on borehole logging, multisensor core logging, and x-ray flflfluorescence (XRF scanning data. The combination of geochemical, paleontological, and logging data will allow high resolution chemo- and biostratigraphy for the CTBI which may in the future serve as an international standard.

Food irradiation: an inquiry by the Australian Consumers' Association

International Nuclear Information System (INIS)

1987-04-01

The Australian Consumers' Association's Inquiry into Food Irradiation was undertaken at the request of the Commonwealth Minister of Health, Dr N Blewett. The terms of reference of the Inquiry covered the implications of food irradiation in terms of consumer health, the environment, and the cost to the consumer

Food irradiation: Some regulatory and technical aspects

International Nuclear Information System (INIS)

1985-10-01

An Advisory Group by IAEA and FAO on Regulatory and Technological Requirements for Authorization of the Food Irradiation Process was held at IAEA Headquarters in Vienna from 5 to 9 November 1984. The task of the Advisory Group was to advise on the scientific and technological considerations affecting the implementation of the food irradiation process, with particular reference to the facilitation of international trade in irradiated foods and to develop guidance on how the various provisions of the Codex General Standard on Irradiated Foods could be incorporated into national legislation in order to facilitate international trade and avoid the occurence of trade barriers. Separate abstracts were prepared for the various presentations at this meeting

JOYO-1 Irradiation Test Campaign Technical Close-out, For Information

International Nuclear Information System (INIS)

G. Borges

2006-01-01

The JOYO-1 irradiation testing was designed to screen the irradiation performance of candidate cladding, structural and reflector materials in support of space reactor development. The JOYO-1 designation refers to the first of four planned irradiation tests in the JOYO reactor. Limited irradiated material performance data for the candidate materials exists for the expected Prometheus-1 duration, fluences and temperatures. Materials of interest include fuel element cladding and core materials (refractory metal alloys and silicon carbide (Sic)), vessel and plant structural materials (refractory metal alloys and nickel-base superalloys), and control and reflector materials (BeO). Key issues to be evaluated were long term microstructure and material property stability. The JOYO-1 test campaign was initiated to irradiate a matrix of specimens at prototypical temperatures and fluences anticipated for the Prometheus-1 reactor [Reference (1)]. Enclosures 1 through 9 describe the specimen and temperature monitors/dosimetry fabrication efforts, capsule design, disposition of structural material irradiation rigs, and plans for post-irradiation examination. These enclosures provide a detailed overview of Naval Reactors Prime Contractor Team (NRPCT) progress in specific areas; however, efforts were in various states of completion at the termination of NRPCT involvement with and restructuring of Project Prometheus

JOYO-1 Irradiation Test Campaign Technical Close-out, For Information

Energy Technology Data Exchange (ETDEWEB)

G. Borges

2006-01-31

The JOYO-1 irradiation testing was designed to screen the irradiation performance of candidate cladding, structural and reflector materials in support of space reactor development. The JOYO-1 designation refers to the first of four planned irradiation tests in the JOYO reactor. Limited irradiated material performance data for the candidate materials exists for the expected Prometheus-1 duration, fluences and temperatures. Materials of interest include fuel element cladding and core materials (refractory metal alloys and silicon carbide (Sic)), vessel and plant structural materials (refractory metal alloys and nickel-base superalloys), and control and reflector materials (BeO). Key issues to be evaluated were long term microstructure and material property stability. The JOYO-1 test campaign was initiated to irradiate a matrix of specimens at prototypical temperatures and fluences anticipated for the Prometheus-1 reactor [Reference (1)]. Enclosures 1 through 9 describe the specimen and temperature monitors/dosimetry fabrication efforts, capsule design, disposition of structural material irradiation rigs, and plans for post-irradiation examination. These enclosures provide a detailed overview of Naval Reactors Prime Contractor Team (NRPCT) progress in specific areas; however, efforts were in various states of completion at the termination of NRPCT involvement with and restructuring of Project Prometheus.

Societal benefits of food irradiation

International Nuclear Information System (INIS)

Prakash, Anuradha

2013-01-01

Food irradiation has a direct impact on society by reducing the occurrence of food-borne illness, decreasing food spoilage and waste, and facilitating global trade. Food irradiation is approved in 40 countries around the world to decontaminate food of disease and spoilage causing microorganisms, sterilize insect pests, and inhibit sprouting. A recent estimate suggests that 500,000 metric of food is currently irradiated worldwide, primarily to decontaminate spices. Since its first use in the 1960s the use of irradiation for food has grown slowly, but it remains the major technology of choice for certain applications. The largest growth sector in recent years has been phytosanitary irradiation of fruit to disinfest fruit intended for international shipment. For many countries which have established strict quarantine standards, irradiation offers as an effective alternative to chemical fumigants some of which are being phased out due to their effects on the ozone layer. Insects can be sterilized at very low dose levels, thus quality of fruit can be maintained. Irradiation is also highly effective in destroying microbial pathogens such as Salmonella spp., E. coli, and Listeria, hence its application for treatment of spices, herbs, dried vegetables, frozen seafood, poultry, and meat and its contribution to reducing foodborne illnesses. Unfortunately the use of irradiation for improving food safety has been under-exploited. This presentation will provide details on the use, benefits, opportunities, and challenges of food irradiation. (author)

Up-to-date status of food irradiation

Science.gov (United States)

Ahmed, Mainuddin

1993-07-01

The last decade has witnessed significant advancement of the acceptance of food irradiation processing. At present 37 countries have approved one or more food items for human consumption and 25 countries have commercialized this process. More developing countries are showing keen interest to introduce irradiation processing in order to reduce post-harvest food losses, to increase export potentials and to ensure safety of food to their people. Although progress towards acceptance of food irradiation by the industry is slow, actual market trials have shown that once consumers have understood this technology, they are willing to buy irradiated foods. This paper deals with the latest developments in the field of food irradiation with particular reference to legislation, consumer acceptance, commercialization and potential application in developing countries. This paper also deals with the role played by the International Organizations, aimed at facilitating the acceptance of food irradiation.

Photosynthesis–irradiance parameters of marine phytoplankton: synthesis of a global data set

Directory of Open Access Journals (Sweden)

H. A. Bouman

2018-02-01

Full Text Available The photosynthetic performance of marine phytoplankton varies in response to a variety of factors, environmental and taxonomic. One of the aims of the MArine primary Production: model Parameters from Space (MAPPS project of the European Space Agency is to assemble a global database of photosynthesis–irradiance (P-E parameters from a range of oceanographic regimes as an aid to examining the basin-scale variability in the photophysiological response of marine phytoplankton and to use this information to improve the assignment of P-E parameters in the estimation of global marine primary production using satellite data. The MAPPS P-E database, which consists of over 5000 P-E experiments, provides information on the spatio-temporal variability in the two P-E parameters (the assimilation number, PmB, and the initial slope, αB, where the superscripts B indicate normalisation to concentration of chlorophyll that are fundamental inputs for models (satellite-based and otherwise of marine primary production that use chlorophyll as the state variable. Quality-control measures consisted of removing samples with abnormally high parameter values and flags were added to denote whether the spectral quality of the incubator lamp was used to calculate a broad-band value of αB. The MAPPS database provides a photophysiological data set that is unprecedented in number of observations and in spatial coverage. The database will be useful to a variety of research communities, including marine ecologists, biogeochemical modellers, remote-sensing scientists and algal physiologists. The compiled data are available at https://doi.org/10.1594/PANGAEA.874087 (Bouman et al., 2017.

A comparison of methods to estimate daily global solar irradiation from other climatic variables on the Canadian prairies

International Nuclear Information System (INIS)

Barr, A.G.; McGinn, S.M.; Cheng, S.B.

1996-01-01

Historic estimates of daily global solar irradiation are often required for climatic impact studies. Regression equations with daily global solar irradiation, H, as the dependent variable and other climatic variables as the independent variables provide a practical way to estimate H at locations where it is not measured. They may also have potential to estimate H before 1953, the year of the first routine H measurements in Canada. This study compares several regression equations for calculating H on the Canadian prairies. Simple linear regression with daily bright sunshine duration as the dependent variable accounted for 90% of the variation of H in summer and 75% of the variation of H in winter. Linear regression with the daily air temperature range as the dependent variable accounted for 45% of the variation of H in summer and only 6% of the variation of H in winter. Linear regression with precipitation status (wet or dry) as the dependent variable accounted for only 35% of the summer-time variation in H, but stratifying other regression analyses into wet and dry days reduced their root-mean-squared errors. For periods with sufficiently dense bright sunshine observations (i.e. after 1960), however, H was more accurately estimated from spatially interpolated bright sunshine duration than from locally observed air temperature range or precipitation status. The daily air temperature range and precipitation status may have utility for estimating H for periods before 1953, when they are the only widely available climatic data on the Canadian prairies. Between 1953 and 1989, a period of large climatic variation, the regression coefficients did not vary significantly between contrasting years with cool-wet, intermediate and warm-dry summers. They should apply equally well earlier in the century. (author)

Illuminance and global solar irradiation in Northeast Brazil; Iluminancia e irradiacao solar global na regiao Nordeste do Brasil

Energy Technology Data Exchange (ETDEWEB)

Leal, Sergio da S.; Tiba, Chigueru [Universidade Federal de Pernambuco (DEN/UFPE), Recife, PE (Brazil). Dept. de Energia Nuclear], Emails: tiba@ufpe.br, chigueru.tiba@pesquisador.cnpq.br

2006-07-01

In Brazil and particularly in the Northeast of Brazil, illuminance measures are not part of routine meteorological station measures, and therefore they are still rare than solar irradiation measures. In this context, two stations were installed in Pernambuco: one in Recife (maritime tropical climate) in April 2003 and the other in Pesqueira (tropical and semi-arid) in September 2004 for carrying out simultaneous measurements of hourly solar irradiation and illuminance which permit the modeling and the statistic validation of the relationship between these two parameters and with this, makes possible the estimation of illuminance where there existed only information on solar irradiation. The Alados et al. model with local coefficients showed a superior statistical performance, producing a mean bias deviation in the order of 3% and 1% and root mean quadratic deviation of 10% and 3% respectively for Recife and Pesqueira (author)

Traceable calibration of photovoltaic reference cells using natural sunlight

Science.gov (United States)

Müllejans, H.; Zaaiman, W.; Pavanello, D.; Dunlop, E. D.

2018-02-01

At the European Solar Test Installation (ESTI) photovoltaic (PV) reference cells are calibrated traceably to SI units via the World Radiometric Reference (WRR) using natural sunlight. The Direct Sunlight Method (DSM) is described in detail and the latest measurement results and an updated uncertainty budget are reported. These PV reference cells then provide a practical means for measuring the irradiance of natural or simulated sunlight during the calibration of other PV devices.

Public acceptance and trade development of irradiated food in Sri Lanka with special reference to spices and onions

International Nuclear Information System (INIS)

Wilson Wijeratnam, R.S.; Sivakumar, D.

2001-01-01

Sri Lankan spices, onion, shallots and dried chillies suffer considerable storage losses due to inadequate preservation method. Irradiation to a dose 7 kGy was found to be effective technique to reduce storage losses and improve quality of different spices. Preliminary results showed prospect of using irradiation for large scale preservation of dried chillis. But due to lack of irradiation, facility scaled- up irradiation and storage trials could not be undertaken. Based on study conducted by the Ceylon Institute of Scientific and Industrial Research, a report was submitted to the Atomic Energy Authority of Sri Lanka on the current demand for a multi-purpose irradiation facility. The food items identified for irradiation processing include spices, desiccated coconut, shrimps for export; and onions, chillies and dried fish products, foliage plants and medical products for local trade. The volume of products for commercial processing has also been indicated in the survey report. Steps for approval of the Harmonised Regulations on Food Irradiation as adopted in the RCA Workshop in Seoul, 1998 are at the processing level for submission as a parliamentary bill. A consumer acceptance survey was carried out in 1997; the outcome showed a low acceptance for irradiated spices. About 200 participants comprising private exporters, govt. officials and students were made aware of the irradiation process and benefits of irradiation treatment through the training programmes on post-harvest management at the CISIR. (author)

Recent changes in solar irradiance and infrared irradiance related with air temperature and cloudiness at the King Sejong Station, Antarctica

Science.gov (United States)

Jung, Y.; Kim, J.; Cho, H.; Lee, B.

2006-12-01

The polar region play a critical role in the surface energy balance and the climate system of the Earth. The important question in the region is that what is the role of the Antarctic atmospheric heat sink of global climate. Thus, this study shows the trends of global solar irradiance, infrared irradiance, air temperature and cloudiness measured at the King Sejong station, Antarctica, during the period of 1996-2004 and determines their relationship and variability of the surface energy balance. Annual average of solar radiation and cloudiness is 81.8 Wm-2 and 6.8 oktas and their trends show the decrease of -0.24 Wm-2yr-1(-0.30 %yr-1) and 0.02 oktas yr-1(0.30 %yr-1). The change of solar irradiance is directly related to change of cloudiness and decrease of solar irradiance presents radiative cooling at the surface. Monthly mean infrared irradiance, air temperature and specific humidity shows the decrease of -2.11 Wm^{- 2}yr-1(-0.75 %yr-1), -0.07 'Cyr-1(-5.15 %yr-1) and -0.044 gkg-1yr-1(-1.42 %yr-1), respectively. Annual average of the infrared irradiance is 279.9 Wm-2 and correlated with the air temperature, specific humidity and cloudiness. A multiple regression model for estimation of the infrared irradiance using the components has been developed. Effects of the components on the infrared irradiance changes show 52 %, 19 % and 10 % for air temperature, specific humidity and cloudiness, respectively. Among the components, air temperature has a great influence on infrared irradiance. Despite the increase of cloudiness, the decrease in the infrared irradiance is due to the decrease of air temperature and specific humidity which have a cooling effect. Therefore, the net radiation of the surface energy balance shows radiative cooling of negative 11-24 Wm^{- 2} during winter and radiative warming of positive 32-83 Wm-2 during the summer. Thus, the amount of shortage and surplus at the surface is mostly balanced by turbulent flux of sensible and latent heat.

On nonstationarity and antipersistency in global temperature series

Science.gov (United States)

KäRner, O.

2002-10-01

Statistical analysis is carried out for satellite-based global daily tropospheric and stratospheric temperature anomaly and solar irradiance data sets. Behavior of the series appears to be nonstationary with stationary daily increments. Estimating long-range dependence between the increments reveals a remarkable difference between the two temperature series. Global average tropospheric temperature anomaly behaves similarly to the solar irradiance anomaly. Their daily increments show antipersistency for scales longer than 2 months. The property points at a cumulative negative feedback in the Earth climate system governing the tropospheric variability during the last 22 years. The result emphasizes a dominating role of the solar irradiance variability in variations of the tropospheric temperature and gives no support to the theory of anthropogenic climate change. The global average stratospheric temperature anomaly proceeds like a 1-dim random walk at least up to 11 years, allowing good presentation by means of the autoregressive integrated moving average (ARIMA) models for monthly series.

A global reference database from very high resolution commercial satellite data and methodology for application to Landsat derived 30 m continuous field tree cover data

Science.gov (United States)

Pengra, Bruce; Long, Jordan; Dahal, Devendra; Stehman, Stephen V.; Loveland, Thomas R.

2015-01-01

The methodology for selection, creation, and application of a global remote sensing validation dataset using high resolution commercial satellite data is presented. High resolution data are obtained for a stratified random sample of 500 primary sampling units (5 km  ×  5 km sample blocks), where the stratification based on Köppen climate classes is used to distribute the sample globally among biomes. The high resolution data are classified to categorical land cover maps using an analyst mediated classification workflow. Our initial application of these data is to evaluate a global 30 m Landsat-derived, continuous field tree cover product. For this application, the categorical reference classification produced at 2 m resolution is converted to percent tree cover per 30 m pixel (secondary sampling unit)for comparison to Landsat-derived estimates of tree cover. We provide example results (based on a subsample of 25 sample blocks in South America) illustrating basic analyses of agreement that can be produced from these reference data. Commercial high resolution data availability and data quality are shown to provide a viable means of validating continuous field tree cover. When completed, the reference classifications for the full sample of 500 blocks will be released for public use.

UTN's gamma irradiation facility: design and concept

International Nuclear Information System (INIS)

Mohamad Noor Mohamad Yunus

1986-01-01

UTN is building a multipurpose gamma irradiation facility which compromises of research and pilot scale irradiation cells in The Fifth Malaysia Plan. The paper high-lights the basic futures of the facility in terms of its design and selection including layout sketches. Plant performances and limitations are discussed. Plants safety is briefly highlighted in block diagrams. Lastly, a typical specification brief is tabled in appendix for reference purposes. (author)

Neutronic Modelling in Support of the Irradiation Programmes

International Nuclear Information System (INIS)

Koonen, E.

2005-01-01

Irradiation experiments are generally conducted to determine some specific characteristics of the concerned fuels and structural materials under well defined irradiation conditions. For the determination of the latter the BR2 division has an autonomous reactor physics cell and has implemented the required computational tools. The major tool used is a three-dimensional full-scale Monte Carlo model of the BR2 reactor developed under MCNP-4C for the simulation of irradiation conditions. The objectives of work performed by SCK-CEN are to evaluate and adjust irradiation conditions by adjustments of the environment, differential rod positions, axial and azimuthal positioning of the samples, global power level, ...; to deliver reliable, well defined irradiation condition and fluence data during and after irradiation; to assist the designer of new irradiation devices by simulations and neutronic optimisations of design options; to provide computational support to related projects as a way to valorise the capabilities that the BR2 reactor can offer

Modeling the relationship between photosynthetically active radiation and global horizontal irradiance using singular spectrum analysis

International Nuclear Information System (INIS)

Zempila, Melina-Maria; Taylor, Michael; Bais, Alkiviadis; Kazadzis, Stelios

2016-01-01

We report on the construction of generic models to calculate photosynthetically active radiation (PAR) from global horizontal irradiance (GHI), and vice versa. Our study took place at stations of the Greek UV network (UVNET) and the Hellenic solar energy network (HNSE) with measurements from NILU-UV multi-filter radiometers and CM pyranometers, chosen due to their long (≈1 M record/site) high temporal resolution (≈1 min) record that captures a broad range of atmospheric environments and cloudiness conditions. The uncertainty of the PAR measurements is quantified to be ±6.5% while the uncertainty involved in GHI measurements is up to ≈±7% according to the manufacturer. We show how multi-linear regression and nonlinear neural network (NN) models, trained at a calibration site (Thessaloniki) can be made generic provided that the input–output time series are processed with multi-channel singular spectrum analysis (M-SSA). Without M-SSA, both linear and nonlinear models perform well only locally. M-SSA with 50 time-lags is found to be sufficient for identification of trend, periodic and noise components in aerosol, cloud parameters and irradiance, and to construct regularized noise models of PAR from GHI irradiances. Reconstructed PAR and GHI time series capture ≈95% of the variance of the cross-validated target measurements and have median absolute percentage errors <2%. The intra-site median absolute error of M-SSA processed models were ≈8.2±1.7 W/m"2 for PAR and ≈9.2±4.2 W/m"2 for GHI. When applying the models trained at Thessaloniki to other stations, the average absolute mean bias between the model estimates and measured values was found to be ≈1.2 W/m"2 for PAR and ≈0.8 W/m"2 for GHI. For the models, percentage errors are well within the uncertainty of the measurements at all sites. Generic NN models were found to perform marginally better than their linear counterparts. - Highlights: • Generic linear regression and nonlinear neural network

Global Oncology; Harvard Global Health Catalyst summit lecture notes

Science.gov (United States)

Ngwa, Wilfred; Nguyen, Paul

2017-08-01

The material presented in this book is at the cutting-edge of global oncology and provides highly illuminating examples, addresses frequently asked questions, and provides information and a reference for future work in global oncology care, research, education, and outreach.

Establishment of reference intervals of clinical chemistry analytes for the adult population in Saudi Arabia: a study conducted as a part of the IFCC global study on reference values.

Science.gov (United States)

Borai, Anwar; Ichihara, Kiyoshi; Al Masaud, Abdulaziz; Tamimi, Waleed; Bahijri, Suhad; Armbuster, David; Bawazeer, Ali; Nawajha, Mustafa; Otaibi, Nawaf; Khalil, Haitham; Kawano, Reo; Kaddam, Ibrahim; Abdelaal, Mohamed

2016-05-01

This study is a part of the IFCC-global study to derive reference intervals (RIs) for 28 chemistry analytes in Saudis. Healthy individuals (n=826) aged ≥18 years were recruited using the global study protocol. All specimens were measured using an Architect analyzer. RIs were derived by both parametric and non-parametric methods for comparative purpose. The need for secondary exclusion of reference values based on latent abnormal values exclusion (LAVE) method was examined. The magnitude of variation attributable to gender, ages and regions was calculated by the standard deviation ratio (SDR). Sources of variations: age, BMI, physical exercise and smoking levels were investigated by using the multiple regression analysis. SDRs for gender, age and regional differences were significant for 14, 8 and 2 analytes, respectively. BMI-related changes in test results were noted conspicuously for CRP. For some metabolic related parameters the ranges of RIs by non-parametric method were wider than by the parametric method and RIs derived using the LAVE method were significantly different than those without it. RIs were derived with and without gender partition (BMI, drugs and supplements were considered). RIs applicable to Saudis were established for the majority of chemistry analytes, whereas gender, regional and age RI partitioning was required for some analytes. The elevated upper limits of metabolic analytes reflects the existence of high prevalence of metabolic syndrome in Saudi population.

A novel procedure for generating solar irradiance TSYs

Science.gov (United States)

Fanego, Vicente Lara; Rubio, Jesús Pulgar; Peruchena, Carlos M. Fernández; Romeo, Martín Gastón; Tejera, Sara Moreno; Santigosa, Lourdes Ramírez; Balderrama, Rita X. Valenzuela; Tirado, Luis F. Zarzalejo; Pantaleón, Diego Bermejo; Pérez, Manuel Silva; Contreras, Manuel Pavón; García, Ana Bernardos; Anarte, Sergio Macías

2017-06-01

Typical Solar Years (TSYs) are key parameters for the solar energy industry. In particular, TSYs are mainly used for the design and bankability analysis of solar projects. In essence, a TSY intends to describe the expected long-term behavior of the solar resource (direct and/or global irradiance) into a condensed period of one year at the specific location of interest. A TSY differs from a conventional Typical Meteorological Year (TMY) by its absence of meteorological variables other than solar radiation. Concerning the probability of exceedance (Pe) needed for bankability, various scenarios are commonly used, with Pe90, Pe95 or even Pe99 being most usually required as unfavorable scenarios, along with the most widely used median scenario (Pe50). There is no consensus in the scientific community regarding the methodology for generating TSYs for any Pe scenario. Furthermore, the application of two different construction methods to the same original dataset could produce differing TSYs. Within this framework, a group of experts has been established by the Spanish Association for Standardization and Certification (AENOR) in order to propose a method that can be standardized. The method developed by this working group, referred to as the EVA method, is presented in this contribution. Its evaluation shows that it provides reasonable results for the two main irradiance components (direct and global), with low errors in the annual estimations for any given Pe. The EVA method also preserves the long-term statistics when the computed TSYs for a specific Pe are expanded from the monthly basis used in the generation of the TSY to higher time resolutions, such as 1 hour, which are necessary for the precise energy simulation of solar systems.

Traceability of a panoramic gamma irradiator using different TLD systems as transfer instruments

International Nuclear Information System (INIS)

Romero, A.M.; Saez, J.C.

1994-01-01

This work shows the calibration in terms of the new operational radiological quantities Hp(10) and H*(10) for different TLD systems (Harshaw TLD-100 and Panasonic UD-802) used in personal and environmental monitoring. The irradiations were performed in the Spanish Reference Laboratory in radiation protection levels, managed by the CIEMAT Metrology of ionizing radiations Unit. With these data, different calibrations of a panoramic gamma irradiator in terms of the radiological quantity for unit of time were established, providing the traceability of the irradiator to the Reference Laboratory using the corresponding TLD systems as transfer instruments. (Author) 9 refs

Traceability of a panoramic gamma irradiator using different TLD systems as transfer Instruments

International Nuclear Information System (INIS)

Romero, A. M.; Saez, J. C

1994-01-01

This work shows the calibration in terms of the new operational radiological quantities Hp (10) and H(10) for different TLD systems (Harshaw TLD-100 and Panasonic UD-002) used in personal and environmental monitoring. The irradiations were performed in the Spanish Reference Laboratory in radiation protection levels, managed by the CIEMAT Metrology of ionizing radiations Unit. With those data, different calibrations of a panoramic gamma irradiator in terms of the radiological quantity for unit of time were established, providing the traceability of the irradiator to the Reference Laboratory using the corresponding TLD systems as transfer instruments. (Author) 9 refs

Facts about food irradiation. A series of fact sheets from the International Consultative Group on Food Irradiation

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-12-01

The safety and benefits of foods processed by ionizing radiation are well documented. In an effort to provide governments, especially those of developing countries, with scientifically accurate information on issues of general interest to the public, the International Consultative Group on Food Irradiation (ICGFI), which was established under the aegis of the Food and Agriculture Organization of the United Nations (FAO), the World Health Organization (WHO), and the IAEA, decided at its 7th Annual Meeting in Rome, Italy, on October 1990, to issue a series of ''Fact Sheets'' on the subject. ICGFI, an inter-governmental body with a membership of 37 governments, has as one of its mandates the function to provide information to Member States of the FAO, WHO, and IAEA and to the three organizations themselves on the safe and proper use of food irradiation technology. The Fact Sheets included here cover issues relating to: status and trends; scientific and technical terms; food irradiation and radioactivity; chemical changes in irradiated food; nutritional quality of irradiated foods; genetic studies; microbiological safety of irradiated food; irradiation and food safety; irradiation and food additives and residues; packaging of irradiated foods; safety of irradiation facilities; controlling the process; food irradiation costs; and irradiated foods and the consumer. The Fact Sheets have been separately indexed and included in the INIS Database under Reference Numbers 23011206-23011217, 23011319 and 23012743. The Fact Sheets were first issued by the ICGFI Secretariat (Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, Vienna, Austria) in May 1991.

Facts about food irradiation. A series of fact sheets from the International Consultative Group on Food Irradiation

International Nuclear Information System (INIS)

1991-12-01

The safety and benefits of foods processed by ionizing radiation are well documented. In an effort to provide governments, especially those of developing countries, with scientifically accurate information on issues of general interest to the public, the International Consultative Group on Food Irradiation (ICGFI), which was established under the aegis of the Food and Agriculture Organization of the United Nations (FAO), the World Health Organization (WHO), and the IAEA, decided at its 7th Annual Meeting in Rome, Italy, on October 1990, to issue a series of ''Fact Sheets'' on the subject. ICGFI, an inter-governmental body with a membership of 37 governments, has as one of its mandates the function to provide information to Member States of the FAO, WHO, and IAEA and to the three organizations themselves on the safe and proper use of food irradiation technology. The Fact Sheets included here cover issues relating to: status and trends; scientific and technical terms; food irradiation and radioactivity; chemical changes in irradiated food; nutritional quality of irradiated foods; genetic studies; microbiological safety of irradiated food; irradiation and food safety; irradiation and food additives and residues; packaging of irradiated foods; safety of irradiation facilities; controlling the process; food irradiation costs; and irradiated foods and the consumer. The Fact Sheets have been separately indexed and included in the INIS Database under Reference Numbers 23011206-23011217, 23011319 and 23012743. The Fact Sheets were first issued by the ICGFI Secretariat (Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, Vienna, Austria) in May 1991

Evaluation of the Delta-T SPN1 radiometer for the measurement of solar irradiance components

Science.gov (United States)

Estelles, Victor; Serrano, David; Segura, Sara; Wood, John; Webb, Nick; Utrillas, Maria Pilar

2016-04-01

In this study we analyse the performance of an SPN1 radiometer built by Delta-T Devices Ltd. to retrieve global solar irradiance at ground and its components (diffuse, direct) in comparison with measurements from two Kipp&Zonen CMP21 radiometers and a Kipp&Zonen CHP1 pirheliometer, mounted on an active Solys-2 suntracker at the Burjassot site (Valencia, Spain) using data acquired every minute during years 2013 - 2015. The measurement site is close to sea level (60 m a.s.l.), near the Mediterranean coast (10 km) and within the metropolitan area of Valencia City (over 1.500.000 inhabitants). The SPN1 is an inexpensive and versatile instrument for the measurement of the three components of the solar radiation without any mobile part and without any need to azimuthally align the instrument to track the sun (http://www.delta-t.co.uk). The three components of the solar radiation are estimated from a combination of measurements performed by 7 different miniature thermopiles. The SPN1 pyranometer measures the irradiance between 400 and 2700 nm, and the nominal uncertainty for the individual readings is about 8% ± 10 W/m2 (5% for the daily averages). The pyranometer Kipp&Zonen CMP21 model is a secondary standard for the measurement of broadband solar global irradiance in horizontal planes. Two ventilated CMP21 are used for the measurement of the global and diffuse irradiances. The expected total daily uncertainty of the radiometer is estimated to be 2%. The pirheliometer Kipp&Zonen CHP1 is designed for the measurement of the direct irradiance. The principles are similar to the CMP21 pyranometer. The results of the comparison show that the global irradiance from the SPN1 compares very well with the CMP21, with absolute RMSD and MBD differences below the combined uncertainties (15 W/m2 and -5.4 W/m2, respectively; relative RMSD of 3.1%). Both datasets are very well correlated, with a correlation coefficient higher than 0.997 and a slope and intercept very close to 1 and 0

High-water-base hydraulic fluid-irradiation experiments

International Nuclear Information System (INIS)

Bradley, E.C.; Meacham, S.A.

1981-10-01

A remote system for shearing spent nuclear fuel assemblies is being designed under the direction of the Consolidated Fuel Reprocessing Program (CFRP). The design incorporates a dual hydraulic fluid actuation system in which only one of the fluids, a high-water-base (HWBF), would be exposed to ionizing radiation and radioactive contamination. A commercially available synthetic, solution-type HWBF was selected as the reference. Single-sample irradiation experiments were conducted with three commercial fluids over a range of irradiation exposures. The physical and chemical properties of the irradiated HWBFs were analyzed and compared with unirradiated samples. In general, the results of the analyses showed increasing degradation of fluid properties with increasing irradiation dose. The results also indicated that a synthetic solution-type HWBF would perform satisfactorily in the remote shear system where irradiation doses up to 10 6 Gy (10 8 rad) are expected

High-water-base hydraulic fluid-irradiation experiments

Energy Technology Data Exchange (ETDEWEB)

Bradley, E.C.; Meacham, S.A.

1981-10-01

A remote system for shearing spent nuclear fuel assemblies is being designed under the direction of the Consolidated Fuel Reprocessing Program (CFRP). The design incorporates a dual hydraulic fluid actuation system in which only one of the fluids, a high-water-base (HWBF), would be exposed to ionizing radiation and radioactive contamination. A commercially available synthetic, solution-type HWBF was selected as the reference. Single-sample irradiation experiments were conducted with three commercial fluids over a range of irradiation exposures. The physical and chemical properties of the irradiated HWBFs were analyzed and compared with unirradiated samples. In general, the results of the analyses showed increasing degradation of fluid properties with increasing irradiation dose. The results also indicated that a synthetic solution-type HWBF would perform satisfactorily in the remote shear system where irradiation doses up to 10/sup 6/ Gy (10/sup 8/ rad) are expected.

A web service for controlling the quality of measurements of global solar irradiation

Energy Technology Data Exchange (ETDEWEB)

Geiger, M.; Menard, L.; Wald, L. [Ecole des Mines, Paris (France). Centre d' Energetique; Diabate, L. [UFAE/GCMI, Bamako (Mali)

2002-12-01

The control of the quality of irradiation data is often a prerequisite to their further processing. Though data are usually controlled by meteorological offices, the sources are so numerous that the user often faces time-series of measurements containing questionable values. As customers of irradiation data, we established our own procedures to screen time-series of measurements. Since this problem of quality control is of concern to many researchers and engineers and since it is often a lengthy and tedious task, we decided to make this screening procedure available to everyone as a web service. This service is the purpose of this paper. The objective is not to perform a precise and fine control, an objective out of reach without details on the site and instruments, but to perform a likelihood control of the data and to check their plausibility. This is achieved by comparing observations with some expectations based upon the extraterrestrial irradiation and a simulation of the irradiation for clear skies. This service is available to everyone on the Web site www.helioclim.net. It offers a very convenient means to check time-series of irradiation: data are input in a HTML page by a copy and paste procedure and the return is also a HTML page that can be analyzed in detail for the data flagged as suspicious. (author)

Evaluation of the Global Lung Initiative 2012 Reference Values for Spirometry in African Children.

Science.gov (United States)

Arigliani, Michele; Canciani, Mario C; Mottini, Giovanni; Altomare, Michele; Magnolato, Andrea; Loa Clemente, Sofia Vanda; Tshilolo, Leon; Cogo, Paola; Quanjer, Philip H

2017-01-15

Despite the high burden of respiratory disease, no spirometry reference values for African children are available. Investigate whether the Global Lung Initiative (GLI-2012) reference values for spirometry are appropriate for children in sub-Saharan Africa and assess the impact of malnutrition on lung function. Anthropometry and spirometry were obtained in children aged 6 to 12 years from urban and semiurban schools in three African countries. Spirometry z-scores were derived using the GLI-2012 prediction equations for African Americans. Thinness (body mass index z-score Spirometry outcomes were compared with those of African American children from the third National Health and Nutrition Survey. Spirometry data were analyzed from 1,082 schoolchildren (51% boys) aged 6.0 to 12.8 years in Angola (n = 306), Democratic Republic of the Congo (n = 377), and Madagascar (n = 399). GLI-2012 provided a good fit with mean (SD) z-scores of -0.11 (0.83) for FEV 1 , -0.08 (0.86) for FVC, and -0.07 (0.83) for FEV 1 /FVC. Because of low scatter, the fifth centile corresponded to -1.3 z-scores in boys and -1.5 z-scores in girls. Malnourished African children had a normal FEV 1 /FVC ratio but significant reductions of ∼0.5 z-scores (∼5%) in FEV 1 and FVC compared with African American peers from the third National Health and Nutrition Survey. Children in Angola had the lowest, and those in Madagascar had the highest, zFEV 1 and zFVC. The results of this study support the use of GLI-2012 reference values for schoolchildren in sub-Saharan Africa. Malnutrition affects body growth, leading to a proportionately smaller FEV 1 and FVC without respiratory impairment, as shown by the normal FEV 1 /FVC ratio.

Multielement comparison of instrumental neutron activation analysis techniques using reference materials

International Nuclear Information System (INIS)

Ratner, R.T.; Vernetson, W.G.

1995-01-01

Several instrumental neutron activation analysis techniques (parametric, comparative, and k o -standardization) are evaluated using three reference materials. Each technique is applied to National Institute of Standards and Technology standard reference materials, SRM 1577a (Bovine Liver) and SRM 2704 (Buffalo River Sediment), and the United States Geological Survey standard BHVO-1 (Hawaiian Basalt Rock). Identical (but not optimum) irradiation, decay, and counting schemes are employed with each technique to provide a basis for comparison and to determine sensitivities in a routine irradiation scheme. Fifty-one elements are used in this comparison; however, several elements are not detected in the reference materials due to rigid analytical conditions (e.g. insufficient length of irradiation or activity for radioisotope of interest decaying below the lower limit of detection before counting interval). Most elements are normally distributed around certified or consensus values with a standard deviation of 10%. For some elements, discrepancies are observed and discussed. The accuracy, precision, and sensitivity of each technique are discussed by comparing the analytical results to consensus values for the Hawaiian Basalt Rock to demonstrate the diversity of multielement applications. (author) 4 refs.; 2 tabs

Fatigue behavior of Type 316 stainless steel following neutron irradiation inducing helium

International Nuclear Information System (INIS)

Grossbeck, M.L.; Liu, K.C.

1980-01-01

Since a tokamak reactor operates in a cyclic mode, thermal stresses will result in fatigue in structural components, especially in the first wall and blanket. There has been limited work on fatigue in irradiated alloys but none on irradiated materials containing significant amounts of irradiation-induced helium. To provide scoping data and to study the effects of irradiation on fatigue behavior, 20%-cold-worked type 316 stainless steel from the MFE reference heat was studied

Short-term solar irradiation forecasting based on Dynamic Harmonic Regression

International Nuclear Information System (INIS)

Trapero, Juan R.; Kourentzes, Nikolaos; Martin, A.

2015-01-01

Solar power generation is a crucial research area for countries that have high dependency on fossil energy sources and is gaining prominence with the current shift to renewable sources of energy. In order to integrate the electricity generated by solar energy into the grid, solar irradiation must be reasonably well forecasted, where deviations of the forecasted value from the actual measured value involve significant costs. The present paper proposes a univariate Dynamic Harmonic Regression model set up in a State Space framework for short-term (1–24 h) solar irradiation forecasting. Time series hourly aggregated as the Global Horizontal Irradiation and the Direct Normal Irradiation will be used to illustrate the proposed approach. This method provides a fast automatic identification and estimation procedure based on the frequency domain. Furthermore, the recursive algorithms applied offer adaptive predictions. The good forecasting performance is illustrated with solar irradiance measurements collected from ground-based weather stations located in Spain. The results show that the Dynamic Harmonic Regression achieves the lowest relative Root Mean Squared Error; about 30% and 47% for the Global and Direct irradiation components, respectively, for a forecast horizon of 24 h ahead. - Highlights: • Solar irradiation forecasts at short-term are required to operate solar power plants. • This paper assesses the Dynamic Harmonic Regression to forecast solar irradiation. • Models are evaluated using hourly GHI and DNI data collected in Spain. • The results show that forecasting accuracy is improved by using the model proposed

Use of LiDAR for calculating solar irradiance on roofs and façades of buildings at city scale: Methodology, validation, and analysis

Science.gov (United States)

Cheng, Liang; Xu, Hao; Li, Shuyi; Chen, Yanming; Zhang, Fangli; Li, Manchun

2018-04-01

As the rate of urbanization continues to accelerate, the utilization of solar energy in buildings plays an increasingly important role in sustainable urban development. For this purpose, we propose a LiDAR-based joint approach for calculating the solar irradiance incident on roofs and façades of buildings at city scale, which includes a methodology for calculating solar irradiance, the validation of the proposed method, and analysis of its application. The calculation of surface irradiance on buildings may then inform photovoltaic power generation simulations, architectural design, and urban energy planning. Application analyses of the proposed method in the experiment area found that: (1) Global and direct irradiations vary significantly by hour, day, month and season, both following the same trends; however, diffuse irradiance essentially remains unchanged over time. (2) Roof irradiation, but not façade irradiation, displays distinct time-dependent patterns. (3) Global and direct irradiations on roofs are highly correlated with roof aspect and slope, with high global and direct irradiations observed on roofs of aspect 100-250° and slopes of 0-60°, whereas diffuse irradiation on roofs is only affected by roof slope. (4) The façade of a building receives higher levels of global and direct irradiations if facing southeast, south, and southwest; however, diffuse irradiation remains constant regardless of façade orientation.

Subjective Social Status and Well-Being: The Role of Referent Abstraction.

Science.gov (United States)

Haught, Heather M; Rose, Jason; Geers, Andrew; Brown, Jill A

2015-01-01

Subjective social status (SSS) has been shown to predict well-being and mental health, above and beyond objective social status (OSS). However, little is known about the factors that moderate this relationship. Two studies explored whether the link between SSS and well-being varied depending upon the referent used for comparison in SSS judgments. Participants judged their well-being and SSS in comparison to referents that varied in abstraction. A confirmatory factor analysis on SSS judgments yielded two factors: (a) SSS perceptions toward global referents and (b) SSS perceptions toward local referents. SSS relative to a global referent was a better predictor of depression (Studies 1 and 2), life satisfaction (Studies 1 and 2), and self-esteem (Study 2) than SSS relative to a local referent. These findings have theoretical implications for understanding how people differentiate between local vs. global referents and practical implications for status-related health disparities.

Review of recent irradiation-creep results

International Nuclear Information System (INIS)

Coghlan, W.A.

1982-05-01

Materials deform faster under stress in the presence of irradiation by a process known as irradiation creep. This phenomenon is important to reactor design and has been the subject of a large number of experimental and theoretical investigations. The purpose of this work is to review the recent experimental results to obtain a summary of these results and to determine those research areas that require additional information. The investigations have been classified into four subgroups based on the different experimental methods used. These four are: (1) irradiation creep using stress relaxation methods, (2) creep measurements using pressurized tubes, (3) irradiation creep from constant applied load, and (4) irradiation creep experiments using accelerated particles. The similarity and the differences of the results from these methods are discussed and a summary of important results and suggested areas for research is presented. In brief, the important results relate to the dependence of creep on swelling, temperature, stress state and alloying additions. In each of these areas new results have been presented and new questions have arisen which require further research to answer. 65 references

Extension of the RPV irradiation surveillance program of NPP GKN II by T0 approach

International Nuclear Information System (INIS)

Barthelmes, J.; Keim, E.; Hein, H.; Koenig, G.

2015-01-01

The nuclear power plant (NPP) Neckarwestheim II (GKN II) started operation in 1989 and was designed for 40 years of operation. During the plant life time the reactor pressure vessel (RPV) integrity is a main aspect for nuclear safety since the RPV is exposed to neutron irradiation affecting the mechanical material properties, in particular toughness. In this context the ductile to brittle transition reference temperature of the RPV materials can be determined either indirectly according to the RT(NDT) concept by means of comparative examinations of irradiated and unirradiated notched-bar impact specimens or directly according to the Master Curve concept by means of examination of irradiated fracture mechanic specimens and determination of an alternative reference temperature RT(T0). With the implementation and evaluation of the first irradiation surveillance program consisting of three sets, one unirradiated reference set (set 1) and two irradiated sets (set 2 and 3), the RPV safety could be proven for the assessment fluence (AF) of 8*10 18 cm -2 (E > 1 MeV) using the RT(NDT) concept. Against the background of a possible long term operation and the state-of-the-art of science and technology in 1998 the NPP GKN II initiated a supplemental irradiation surveillance program with two irradiation sets (set 4 and 5) containing fracture mechanic specimens for complementary proof of safety according to the Master Curve concept. The results of the first irradiated set 4 are presented and assessed by means of the reference temperatures according to the Master Curve concept and compared to the results of the irradiation sets 1 to 3 of the conventional irradiation surveillance program. As an important outcome the existing RPV integrity assessment could be ensured by the Master Curve results. The applied approach adapts to the state-of-the-art of science and technology and is best practice to ensure the safe operation of RPV supplementary. (authors)

Food irradiation: an alternative technology

Energy Technology Data Exchange (ETDEWEB)

Loaharanu, P

1986-12-31

History has shown that man has continued to search for methods to protect his food from various spoilage agents. Traditional methods of food preservation such as drying, salting, fermentation, have been known for centuries and are being practised even today. Within the past century, modern technologies such as canning, freezing, refrigeration, the use of preservatives and pesticides, have further equipped man with an arsenal of methods to combat food losses and to increase the quantity, quality and safety of our food supplies. The most recent technology, irradiation, has gone through a great deal of research and development in the past 40 years and has shown a strong potential as another method for food preservation. As irradiation is still not familiar to the public at large, this paper attempts to inform scientists, officials, representatives of the food industry, and consumers of the global situation of the safety, benefits and applications of food irradiation by answering common questions often asked about the technology today. Special emphasis will be placed on the possible contribution of food irradiation to ASEAN

Food irradiation: an alternative technology

International Nuclear Information System (INIS)

Loaharanu, P.

1985-01-01

History has shown that man has continued to search for methods to protect his food from various spoilage agents. Traditional methods of food preservation such as drying, salting, fermentation, have been known for centuries and are being practised even today. Within the past century, modern technologies such as canning, freezing, refrigeration, the use of preservatives and pesticides, have further equipped man with an arsenal of methods to combat food losses and to increase the quantity, quality and safety of our food supplies. The most recent technology, irradiation, has gone through a great deal of research and development in the past 40 years and has shown a strong potential as another method for food preservation. As irradiation is still not familiar to the public at large, this paper attempts to inform scientists, officials, representatives of the food industry, and consumers of the global situation of the safety, benefits and applications of food irradiation by answering common questions often asked about the technology today. Special emphasis will be placed on the possible contribution of food irradiation to ASEAN

Fusion Materials Irradiation Test Facility: experimental capabilities and test matrix

International Nuclear Information System (INIS)

Opperman, E.K.

1982-01-01

This report describes the experimental capabilities of the Fusion Materials Irradiation Test Facility (FMIT) and reference material specimen test matrices. The description of the experimental capabilities and the test matrices has been updated to match the current single test cell facility ad assessed experimenter needs. Sufficient detail has been provided so that the user can plan irradiation experiments and conceptual hardware. The types of experiments, irradiation environment and support services that will be available in FMIT are discussed

Application of electron beam irradiation. 4. Treatment of pollutants by electron beam irradiation

International Nuclear Information System (INIS)

Tokunaga, Okihiro; Arai, Hidehiko

1994-01-01

Electron beam irradiation is capable of dissolving and removing pollutants, such as sulfur oxides, nitrogen oxides, and organic compounds, by easy production of OH radicals in flue gas and water. This paper deals with current status in the search for techniques for treating flue gas and waste water, using electron beam irradiation. Pilot tests have been conducted during the period 1991-1994 for the treatment of flue gas caused by coal and garbage burning and road tunnels. Firstly, techniques for cleaning flue gas with electron beams are outlined, with special reference to their characteristics and process of research development. Secondly, the application of electron beam irradiation in the treatment of waste water is described in terms of the following: (1) disinfection of sewage, (2) cleaning of water polluted with toxic organic compounds, (3) treatment for eliminating sewage sludge, (4) promotion of sewage sludge sedimentation, (5) disinfection and composting of sewage sludge, and (6) regeneration of activated carbon used for the treatment of waste water. (N.K.)

Survey of reference materials. V. 1: Biological and environmental reference materials for trace elements, nuclides and microcontaminants

International Nuclear Information System (INIS)

1995-12-01

Irradiation in combination with other food process/treatments, at sterilizing or at substerilizing doses, has long been known to be capable of yielding shelf-stable foods, particularly dry-packed meat, poultry and fish/shellfish products having very good eating quality and nutritional value. However, other than highly specific, targeted used with astronauts and cosmonauts in space, with immune-suppressed medical patients at one US hospital, and for military feeding plus supplying small nich 'markets' in the Republic of South Africa, there has been no commercial exploitation of the research and development that has gone into establishing this potentially very useful and valuable food irradiation application category. But what with rising global energy costs, and immune-comprised/suppressed populations on the increase, together with increasing consumer demand for minimally processed superior eating quality foods in developed countries especially, the potential and need for industrial use of this largely neglected food irradiation areas is becoming more and more apparent. 8 refs, 12 tabs

The prospect of food irradiation and the contribution of radiation chemistry to enact the hygienic safety standard of irradiated foods

International Nuclear Information System (INIS)

Wu Jilan; Yuan Rongyao

1986-01-01

Now, it is said that we are at the dawn of food irradiation application both nationally and internationally. However, referring to the acceptability of customers the labeling of irradiated foods has been a nightmare to the food processors. On the other hand the recommended international standard has the shortcomings of thinking in absolute terms. In this paper a proposal which puts special emphasis on enacting hygienic safety standard of individual irradiated food is recommended. The hygienic safety standard of the irradiated food may be classified in three classes: 1) its hygienic safety standard is similar to that of common food; 2) the maximum permissible quantities of harmful compounds induced by radiation must be controlled; and 3) the quantity of unique radiolysis products may by dutermined. Radiation chemistry plays an important role in enacting the hygienic safety standard of irradiated foods. For international cooperation in this field some suggestions are made

Food irradiation. An update of legal and analytical aspects

International Nuclear Information System (INIS)

Masotti, P.; Zonta, F.

1999-01-01

A new European directive concerning ionising radiation treatment of foodstuffs has been recently adopted, although National laws may continue to be applied at least until 31 December 2000. A brief updated review dealing with the legal and analytical aspects of food irradiation is presented. The legal status of the food irradiation issue presently in force in Italy, in the European Union and in the USA is discussed. Some of the most used and reliable analytical methods for detecting irradiated foodstuffs, with special reference to standardised methods of European Committee of Standardization, are listed [it

Void formation by annealing of neutron-irradiated plastically deformed molybdenum

International Nuclear Information System (INIS)

Petersen, K.; Nielsen, B.; Thrane, N.

1976-01-01

The positron annihilation technique has been used in order to study the influence of plastic deformation on the formation and growth of voids in neutron irradiated molybdenum single crystals treated by isochronal annealing. Samples were prepared in three ways: deformed 12-19% before irradiation, deformed 12-19% after irradiation, and - for reference purposes -non-deformed. In addition a polycrystalline sample was prepared in order to study the influence of the grain boundaries. All samples were irradiated at 60 0 C with a flux of 2.5 x 10 18 fast neutrons/cm 2 . After irradiation the samples were subjected to isochronal annealing. It was found that deformation before irradiation probably enhanced the formation of voids slightly. Deformation after irradiation strongly reduced the void formation. The presence of grain boundaries in the polycrystalline sample had a reducing influence on the growth of voids. (author)

Modelling the spectral irradiance distribution in sunny inland locations using an ANN-based methodology

International Nuclear Information System (INIS)

Torres-Ramírez, M.; Elizondo, D.; García-Domingo, B.; Nofuentes, G.; Talavera, D.L.

2015-01-01

This work is aimed at verifying that in sunny inland locations artificial intelligence techniques may provide an estimation of the spectral irradiance with adequate accuracy for photovoltaic applications. An ANN (artificial neural network) based method was developed, trained and tested to model the spectral distributions between wavelengths ranging from 350 to 1050 nm. Only commonly available input data such as geographical information regarding location, specific date and time together with horizontal global irradiance and ambient temperature are required. Historical information from a 24-month experimental campaign carried out in Jaén (Spain) provided the necessary data to train and test the ANN tool. A Kohonen self-organized map was used as innovative technique to classify the whole input dataset and build a small and representative training dataset. The shape of the spectral irradiance distribution, the in-plane global irradiance (G T ) and irradiation (H T ) and the APE (average photon energy) values obtained through the ANN method were statistically compared to the experimental ones. In terms of shape distribution fitting, the mean relative deformation error stays below 4.81%. The root mean square percentage error is around 6.89% and 0.45% when estimating G T and APE, respectively. Regarding H T , errors lie below 3.18% in all cases. - Highlights: • ANN-based model to estimate the spectral irradiance distribution in sunny inland locations. • MRDE value stay below 4.81% in spectral irradiance distribution shape fitting. • RMSPE is about 6.89% for the in-plane global irradiance and 0.45% for the average photon energy. • Errors stay below 3.18% for all the months of the year in incident irradiation terms. • Improvement of assessment of the impact of the solar spectrum in the performance of a PV module

The application analysis of high energy electron accelerator in food irradiation processing

International Nuclear Information System (INIS)

Deng Wenmin; Chen Hao; Feng Lei; Zhang Yaqun; Chen Xun; Li Wenjun; Xiang Chengfen; Pei Ying; Wang Zhidong

2012-01-01

Irradiation technology of high energy electron accelerator has been highly concerned in food processing industry with its fast development, especially in the field of food irradiation processing. In this paper, equipment and research situation of high energy electron accelerator were collected, meanwhile, the similarities and differences between high energy electron beam and 60 Co γ-rays were discussed. In order to provide more references of high energy electron beam irradiation, the usages of high energy electron in food irradiation processing was prospected. These information would promote the development of domestic food irradiation industry and give a useful message to irradiation enterprises and researchers. (authors)

ESR identification of irradiated foodstuffs

International Nuclear Information System (INIS)

Raffi, J.

1993-01-01

The conditions required to use Electron Spin Resonance (ESR) in identification of irradiated foods is first described. Then we present the results of an intercomparison sponsored by the Community Bureau of Reference involving 22 european laboratories. Qualitative identification of irradiated beef bones, dried grapes and papaya is very easy. Kinetical studies are necessary in case of fish species. Further researches are required in case of pistachio-nuts. Although all laboratories could distinguish between the two dose ranges used in case of meat bones (i.e. 1-3 and 7-10 kGy), there is an overlap of the results from the different laboratories. 2 tabs., 3 figs

Test reference year generation from meteorological and simulated solar radiation data

Energy Technology Data Exchange (ETDEWEB)

Miguel, A. de; Bilbao, J. [University of Valladolid (Spain). Dept. of Applied Physics

2005-06-01

In this paper, a new method for generating test reference year (TRY) from the measured meteorological variables is proposed. Hourly recorded data of air temperature, relative humidity and wind velocity for two stations, Valladolid and Madrid (Spain) were selected to develop the method and a TRY was obtained. Monthly average solar radiation values were calculated taking into account the temperature and solar radiation correlations. Four different methodologies were used to evaluate hourly global solar radiation from hourly weather data of temperature and, as a consequence, four different TRYs with common data sets of temperature, relative humidity and wind velocity were generated for Valladolid and Madrid (Spain) stations. In order to evaluate the four different methodologies, TRYs data were compared with long-term measured data series using statistical estimators such as average, standard deviation, root mean square error (rmse) and mean bias error (mbe). Festa and Ratto and the TAG model, from Aguiar and Collares-Pereira, respectively, turned out to be the best methods for generating hourly solar irradiation data. The best performance was shown by the TRY0 year which was based on the solar radiation models mentioned above. The results show that the best reference year for each site varies with the season and the characteristics of the station. (author)

Computing diffuse fraction of global horizontal solar radiation: A model comparison.

Science.gov (United States)

Dervishi, Sokol; Mahdavi, Ardeshir

2012-06-01

For simulation-based prediction of buildings' energy use or expected gains from building-integrated solar energy systems, information on both direct and diffuse component of solar radiation is necessary. Available measured data are, however, typically restricted to global horizontal irradiance. There have been thus many efforts in the past to develop algorithms for the derivation of the diffuse fraction of solar irradiance. In this context, the present paper compares eight models for estimating diffuse fraction of irradiance based on a database of measured irradiance from Vienna, Austria. These models generally involve mathematical formulations with multiple coefficients whose values are typically valid for a specific location. Subsequent to a first comparison of these eight models, three better performing models were selected for a more detailed analysis. Thereby, the coefficients of the models were modified to account for Vienna data. The results suggest that some models can provide relatively reliable estimations of the diffuse fractions of the global irradiance. The calibration procedure could only slightly improve the models' performance.

Accuracy improvement of irradiation data by combining ground and satellite measurements

Energy Technology Data Exchange (ETDEWEB)

Betcke, J. [Energy and Semiconductor Research Laboratory, Carl von Ossietzky University, Oldenburg (Germany); Beyer, H.G. [Department of Electrical Engineering, University of Applied Science (F.H.) Magdeburg-Stendal, Magdeburg (Germany)

2004-07-01

Accurate and site-specific irradiation data are essential input for optimal planning, monitoring and operation of solar energy technologies. A concrete example is the performance check of grid connected PV systems with the PVSAT-2 procedure. This procedure detects system faults in an early stage by a daily comparison of an individual reference yield with the actual yield. Calculation of the reference yield requires hourly irradiation data with a known accuracy. A field test of the predecessing PVSAT-1 procedure showed that the accuracy of the irradiation input is the determining factor for the overall accuracy of the yield calculation. In this paper we will investigate if it is possible to improve the accuracy of sitespeci.c irradiation data by combining accurate localised pyranometer data with semi-continuous satellite data.We will therefore introduce the ''Kriging of Differences'' data fusion method. Kriging of Differences also offers the possibility to estimate it's own accuracy. The obtainable accuracy gain and the effectiveness of the accuracy prediction will be investigated by validation on monthly and daily irradiation datasets. Results will be compared with the Heliosat method and interpolation of ground data. (orig.)

Dosimetry of blood irradiator - 2000

International Nuclear Information System (INIS)

Mhatre, Sachin G.V.; Shinde, S.H.; Bhat, R.M.; Rao, Suresh; Sharma, D.N.

2008-01-01

Full text: Blood transfusion to an immunodeficient or immunosuppressed patient has a high risk involved due to occurrence of Transfusion Graft Versus Host Disease (T-GVHD). In order to eliminate this problem, blood is routinely exposed to ionizing radiation (gamma) prior to transfusion. Doses ranging from 15 Gy to 50 Gy can prevent T-GVHD. Aim of the present work was to perform dosimetry of 60 Co Blood Irradiator-2000 developed by Board of Radiation and isotope Technology (BRIT), India; using FBX dosimetric system. Dose-rate measured by FBX dosimeter was intercompared with Fricke dosimeter, which is a Reference Standard dosimeter. Experiments included measurement of dose-rate at the centre of irradiation volume, dose mapping in the central vertical plane within the irradiation volume and measurement of average dose received by blood sample using blood bags filled with FBX dosimeter by simulating actual irradiation conditions. During irradiation, the sample chamber is retracted into a cylindrical source cage, so that the sample is irradiated from all sides uniformly. Blood irradiator-2000 has sample rotation facility for increasing the dose uniformity during irradiation. The performance of this was investigated by measuring the central vertical plane dose profile in stationary state as well in rotation using the sample rotation facility (60 rpm). FBX being an aqueous dosimetric system fills container of irregular shape being irradiated hence can be used to integrate the dose over the volume. Dose-rate measured by FBX dosimeter was intercompared with Fricke dosimeter, which was in good agreement. Average dose-rate at the centre of irradiation volume and within the blood bag was measured by FBX and Fricke dosimeters. It was observed that dose profiles measured by FBX and Fricke dosimeters agreed within ± 2%. Dose uniformity within the irradiation volume was found to reduce from 21% to 17% when the sample rotation facility was used. Thus, it is suggested by the

Effects of gamma irradiation on rapeseed meal with special reference to the quantitative changes in oxazolidinethione and other constituents

International Nuclear Information System (INIS)

Nakaya, Tetsuro

1978-01-01

Experiments were carried out to confirm whether the irradiation treatment of rapeseed meal with gamma rays was effective in reducing the goitrogenic effect of meal, and to obtain the information on the reasonable dose level to reduce the above effect. The rapeseed meals from two ordinary and one non-commercial low glucosinolate (Brassica napus L. cv. Bronowski) seeds were exposed to gamma rays of 5, 10, 50 and 100 Mrad respectively. And the changes in oxazolidinethone (OZT) content of these meals by the irradiation were investigated compared with those by the autoclaving treatment under the reasonable condition. The influences of irradiation treatment on the content of the several constituents of meal were also examined. Furthermore, with chicks, the influences of irradiation treatment on the palatability of meal and on the apparent digestibility of its crude protein or crude fiber were investigated. When two ordinary meals were irradiated at the level of 50 Mrad or above, their OZT content reduced to the level of that in a low glucosinolate meal (Bronowski meal) and such irradiation dosages also resulted in a loss of the available lysine (AL) of meals. The extent of the above changes in the contents of OZT and AL was similar to that in rapeseed meal which was autoclaved under the reasonable condition. Treatment at irradiation dosage of either 50 or 100 Mrad resulted in lower crude fiber and higher reducing sugar content than those of non-irradiated meal respectively. Tests with chicks revealed that an irradiation treatment tended to improve the palatability and the crude fiber digestibility of meal but had no appreciable effect on the digestibility of its crude protein. In summary, these findings indicate that the gamma irradiation at dosage of 50 Mrad or above as well as the autoclaving treatment under the reasonable condition is effective in reducing the goitrogenic effect of rapeseed meal. (auth.)

Evaluation of time-accelerated irradiation method of elastomer by modulus-ultimate elongation profile

International Nuclear Information System (INIS)

Ito, Masayuki; Oka, Toshitaka; Hama, Yosimasa

2009-01-01

'Generalized modulus-ultimate elongation profile' was induced from the relationship between the modulus and the ultimate elongation of an elastomer that was quantitatively added crosslinking and scission. This profile can be used to evaluate the time-accelerated irradiation methods of ethylene-propylene-diene elastomer. The irradiation under low dose rate (0.33 kGy/h) at room temperature was the reference condition. The short-time irradiation condition was 4.2 kGy/h in 0.5 MPa oxygen at room temperature and 5.0 kGy/h in air at 70 o C. The former tended to bring about the higher ratio of scission than the reference condition; the latter tended to bring about the higher ratio of crosslinking.

Neutron self-shielding with k0-NAA irradiations

International Nuclear Information System (INIS)

Chilian, C.; Chambon, R.; Kennedy, G.

2010-01-01

A sample of SMELS Type II reference material was mixed with powdered Cd-nitrate neutron absorber and analysed by k 0 NAA for 10 elements. The thermal neutron self-shielding effect was found to be 34.8%. When flux monitors were irradiated sufficiently far from the absorbing sample, it was found that the self-shielding could be corrected accurately using an analytical formula and an iterative calculation. When the flux monitors were irradiated 2 mm from the absorbing sample, the calculations over-corrected the concentrations by as much as 30%. It is recommended to irradiate flux monitors at least 14 mm from a 10 mm diameter absorbing sample.

Analysis of Global Horizontal Irradiance in Version 3 of the National Solar Radiation Database.

Energy Technology Data Exchange (ETDEWEB)

Hansen, Clifford; Martin, Curtis E.; Guay, Nathan Gene

2015-09-01

We report an analysis that compares global horizontal irradiance (GHI) estimates from version 3 of the National Solar Radiation Database (NSRDB v3) with surface measurements of GHI at a wide variety of locations over the period spanning from 2005 to 2012. The NSRDB v3 estimate of GHI are derived from the Physical Solar Model (PSM) which employs physics-based models to estimate GHI from measurements of reflected visible and infrared irradiance collected by Geostationary Operational Environment Satellites (GOES) and several other data sources. Because the ground measurements themselves are uncertain our analysis does not establish the absolute accuracy for PSM GHI. However by examining the comparison for trends and for consistency across a large number of sites, we may establish a level of confidence in PSM GHI and identify conditions which indicate opportunities to improve PSM. We focus our evaluation on annual and monthly insolation because these quantities directly relate to prediction of energy production from solar power systems. We find that generally, PSM GHI exhibits a bias towards overestimating insolation, on the order of 5% when all sky conditions are considered, and somewhat less (-3%) when only clear sky conditions are considered. The biases persist across multiple years and are evident at many locations. In our opinion the bias originates with PSM and we view as less credible that the bias stems from calibration drift or soiling of ground instruments. We observe that PSM GHI may significantly underestimate monthly insolation in locations subject to broad snow cover. We found examples of days where PSM GHI apparently misidentified snow cover as clouds, resulting in significant underestimates of GHI during these days and hence leading to substantial understatement of monthly insolation. Analysis of PSM GHI in adjacent pixels shows that the level of agreement between PSM GHI and ground data can vary substantially over distances on the order of 2 km. We

International standards, Agreements and Policy of food Irradiation

International Nuclear Information System (INIS)

Roberts, P.B.

1997-01-01

There are few internationally recognised standards and agreements related to irradiated foods. Codex Alimentarius has its General standard for Irradiated foods. This sets standards for the production of irradiated foods that are safe and nutritionally adequate. Guidelines for the proper processing of foods by irradiation are covered in the Codex Recommended International Code of Practice for the Operation of Radiation Facilities Used for the Treatment of Food. For irradiation as a quarantine treatment for fruit, vegetables and other plants, the relevant international organization is the International Plant Protection Convention (IPPC), IPPC has no standards or guidelines for irradiation treatments. However, regional organizations within IPPC are moving towards recognition of irradiation as a technically viable and effective method of insect disinfestation. Especially notable are actions within the North American Plant Protection Organisation (NAPPO). NAPPO has endorsed a standard on the use of irradiation as a quarantine treatment. Other speakers have provided considerable detail on the Codex standard and on the situation with regard to quarantine issues. In this talk I will concentrate on irradiated foods as commodities that will be traded internationally in increasing amounts as we approach the next century. International trade is governed by bilateral arrangements. However, these arrangements should be consistent with the overarching multilateral agreements of the World trade Organization (WTO). The WTO Agreements do not refer directly to irradiation or irradiated foods. However, in this talk I will try to interpret the implications of the Agreements for trade in irradiated food. (Author)

International standards, Agreements and Policy of food Irradiation

Energy Technology Data Exchange (ETDEWEB)

Roberts, P.B. [Industrial and Biological Section. Institute of Geological and Nuclear Science. P.O. Box 31. Lower Hutt (New Zealand)

1997-12-31

There are few internationally recognised standards and agreements related to irradiated foods. Codex Alimentarius has its General standard for Irradiated foods. This sets standards for the production of irradiated foods that are safe and nutritionally adequate. Guidelines for the proper processing of foods by irradiation are covered in the Codex Recommended International Code of Practice for the Operation of Radiation Facilities Used for the Treatment of Food. For irradiation as a quarantine treatment for fruit, vegetables and other plants, the relevant international organization is the International Plant Protection Convention (IPPC), IPPC has no standards or guidelines for irradiation treatments. However, regional organizations within IPPC are moving towards recognition of irradiation as a technically viable and effective method of insect disinfestation. Especially notable are actions within the North American Plant Protection Organisation (NAPPO). NAPPO has endorsed a standard on the use of irradiation as a quarantine treatment. Other speakers have provided considerable detail on the Codex standard and on the situation with regard to quarantine issues. In this talk I will concentrate on irradiated foods as commodities that will be traded internationally in increasing amounts as we approach the next century. International trade is governed by bilateral arrangements. However, these arrangements should be consistent with the overarching multilateral agreements of the World trade Organization (WTO). The WTO Agreements do not refer directly to irradiation or irradiated foods. However, in this talk I will try to interpret the implications of the Agreements for trade in irradiated food. (Author)

Relevance of plastic limit loads to reference stress approach for surface cracked cylinder problems

International Nuclear Information System (INIS)

Kim, Yun-Jae; Shim, Do-Jun

2005-01-01

To investigate the relevance of the definition of the reference stress to estimate J and C* for surface crack problems, this paper compares finite element (FE) J and C* results for surface cracked pipes with those estimated according to the reference stress approach using various definitions of the reference stress. Pipes with part circumferential inner surface cracks and finite internal axial cracks are considered, subject to internal pressure and global bending. The crack depth and aspect ratio are systematically varied. The reference stress is defined in four different ways using (i) a local limit load (ii), a global limit load, (iii) a global limit load determined from the FE limit analysis, and (iv) the optimised reference load. It is found that the reference stress based on a local limit load gives overall excessively conservative estimates of J and C*. Use of a global limit load clearly reduces the conservatism, compared to that of a local limit load, although it can sometimes provide non-conservative estimates of J and C*. The use of the FE global limit load gives overall non-conservative estimates of J and C*. The reference stress based on the optimised reference load gives overall accurate estimates of J and C*, compared to other definitions of the reference stress. Based on the present findings, general guidance on the choice of the reference stress for surface crack problems is given

Changes in T-cell count in patients undergoing radiotherapy. With particular reference to preoperative irradiation for gastric carcinoma

Energy Technology Data Exchange (ETDEWEB)

Makino, K; Sato, S [Tokyo Medical Coll. (Japan)

1980-01-01

To know changes in immunological competence of T-cells induced by radiotherapy, T-cells in peripheral blood of patients who underwent radiotherapy were observed before, during, and 6 months after the irradiation. The subjects were 69 patients having malignant tumors including 20 with gastric cancer, 15 with breast cancer, and 9 with colon cancer. 200 rad of an exposure dose was irradiated for successive 5 to 6 days. A total of exposure doses ranged from 2,000 to 10,000 rad. T-cell count decreased markedly until exposure doses reached 3,000 rad, but its decrease was mild after exposure doses were over 3,000 rad. T-cell count decreased slightly in patients whose head and neck were irradiated, but it decreased markedly in patients whose thorax and abdomen were irradiated. Therefore, it was thought that there was a relationship between exposed sites and the decrease in T-cell count. T-cell count decreased markedly when irradiation field was wide. The smaller exposure doses were, the earlier the recovery of T-cell were. T-cells irradiated with over 7,000 rad did not recover within 6 months after the irradiation. The recovery of T-cells in patients with gastric cancer who did not undergo gastrectomy was markedly worse than that in patients who had gastrectomy. Patterns of changes in T-cell count were divided into 4 (ascending curve, U-type curve, flat curve, and descending curve), and prognosis of patients were discussed. There was a clear difference in prognosis of patients among four patterns.

Mechanical performance of irradiated beryllium pebbles

Energy Technology Data Exchange (ETDEWEB)

Scaffidi-Argentina, F.; Dalle-Donne, M.; Werle, H. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Neutronenphysik und Reaktortechnik

1998-01-01

For the Helium Cooled Pebble Bed (HCPB) Blanket, which is one of the two reference concepts studied within the European Fusion Technology Programme, the neutron multiplier consists of a mixed bed of about 2 and 0.1-0.2 mm diameter beryllium pebbles. Beryllium has no structural function in the blanket, however microstructural and mechanical properties are important, as they might influence the material behavior under neutron irradiation. The EXOTIC-7 as well as the `Beryllium` experiments carried out in the HFR reactor in Petten are considered as the most detailed and significant tests for investigating it. This paper reviews the present status of beryllium post-irradiation examinations performed at the Forschungszentrum Karlsruhe with samples from these irradiation experiments, emphasizing the effects of irradiation of essential material properties and trying to elucidate the processes controlling the property changes. The microstructure, the porosity distribution, the impurity content, the behavior under compression loads and the compatibility of the beryllium pebbles with lithium orthosilicate (Li{sub 4}SiO{sub 4}) during the in-pile irradiation are presented and critically discussed. Qualitative information on ductility and creep obtained by hardness-type measurements are also supplied. (author)

Relationship between the NO2 photolysis frequency and the solar global irradiance

Directory of Open Access Journals (Sweden)

S. Fan

2009-11-01

Full Text Available Representative values of the atmospheric NO2 photolysis frequency j(NO2 are required for the adequate calculation and interpretation of NO and NO2 concentrations and exchange fluxes near the surface. Direct measurements of j(NO2 at ground level are often not available in field studies. In most cases, modeling approaches involving complex radiative transfer calculations are used to estimate j(NO2 and other photolysis frequencies for air chemistry studies. However, important input parameters for accurate modeling are often missing, most importantly with regard to the radiative effects of clouds. On the other hand, solar global irradiance ("global radiation", G is nowadays measured as a standard parameter in most field experiments and in many meteorological observation networks around the world. Previous studies mainly reported linear relationships between j(NO2 and G. We have measured j(NO2 using spectro- or filter radiometers and G using pyranometers side-by-side at several field sites. Our results cover a solar zenith angle range of 0–90°, and are based on nine field campaigns in temperate, subtropical and tropical environments during the period 1994–2008. We show that a second-order polynomial function (intercept = 0: j(NO2=(1+α× (B1×G+B2×G2, with α defined as the site-dependent UV-A surface albedo and the polynomial coefficients: B1=(1.47± 0.03×10-5 W−1 m2 s−1 and B2=(-4.84±0.31×10-9 W−2 m4 s−1 can be used to estimate ground-level j(NO2 directly from G, independent of solar zenith angle under all atmospheric conditions. The absolute j(NO2 residual of the empirical function is ±6×10-4 s−1(2σ. The relationship is valid for sites below 800 m a.s.l. and with low surface albedo (α<0.2. It is not valid in high mountains, above snow or ice and sandy or dry soil surfaces.

Radiation-induced epigenetic alterations after low and high LET irradiations

International Nuclear Information System (INIS)

Aypar, Umut; Morgan, William F.; Baulch, Janet E.

2011-01-01

Epigenetics, including DNA methylation and microRNA (miRNA) expression, could be the missing link in understanding radiation-induced genomic instability (RIGI). This study tests the hypothesis that irradiation induces epigenetic aberrations, which could eventually lead to RIGI, and that the epigenetic aberrations induced by low linear energy transfer (LET) irradiation are different than those induced by high LET irradiations. GM10115 cells were irradiated with low LET X-rays and high LET iron (Fe) ions and evaluated for DNA damage, cell survival and chromosomal instability. The cells were also evaluated for specific locus methylation of nuclear factor-kappa B (NFκB), tumor suppressor in lung cancer 1 (TSLC1) and cadherin 1 (CDH1) gene promoter regions, long interspersed nuclear element 1 (LINE-1) and Alu repeat element methylation, CpG and non-CpG global methylation and miRNA expression levels. Irradiated cells showed increased micronucleus induction and cell killing immediately following exposure, but were chromosomally stable at delayed times post-irradiation. At this same delayed time, alterations in repeat element and global DNA methylation and miRNA expression were observed. Analyses of DNA methylation predominantly showed hypomethylation, however hypermethylation was also observed. We demonstrate that miRNA expression levels can be altered after X-ray irradiation and that these miRNA are involved in chromatin remodeling and DNA methylation. A higher incidence of epigenetic changes was observed after exposure to X-rays than Fe ions even though Fe ions elicited more chromosomal damage and cell killing. This distinction is apparent at miRNA analyses at which only three miRNA involved in two major pathways were altered after high LET irradiations while six miRNA involved in five major pathways were altered after low LET irradiations. This study also shows that the irradiated cells acquire epigenetic changes suggesting that epigenetic aberrations may arise in the

Radiation-induced epigenetic alterations after low and high LET irradiations

Energy Technology Data Exchange (ETDEWEB)

Aypar, Umut, E-mail: uaypa001@umaryland.edu [Department of Radiation Oncology, Radiation Oncology Research Laboratory, University of Maryland School of Medicine, Baltimore, MD 21201 (United States); Morgan, William F. [Biological Sciences Division, Pacific Northwest National Laboratory, Richland, WA 99352 (United States); Baulch, Janet E. [Department of Radiation Oncology, Radiation Oncology Research Laboratory, University of Maryland School of Medicine, Baltimore, MD 21201 (United States)

2011-02-10

Epigenetics, including DNA methylation and microRNA (miRNA) expression, could be the missing link in understanding radiation-induced genomic instability (RIGI). This study tests the hypothesis that irradiation induces epigenetic aberrations, which could eventually lead to RIGI, and that the epigenetic aberrations induced by low linear energy transfer (LET) irradiation are different than those induced by high LET irradiations. GM10115 cells were irradiated with low LET X-rays and high LET iron (Fe) ions and evaluated for DNA damage, cell survival and chromosomal instability. The cells were also evaluated for specific locus methylation of nuclear factor-kappa B (NF{kappa}B), tumor suppressor in lung cancer 1 (TSLC1) and cadherin 1 (CDH1) gene promoter regions, long interspersed nuclear element 1 (LINE-1) and Alu repeat element methylation, CpG and non-CpG global methylation and miRNA expression levels. Irradiated cells showed increased micronucleus induction and cell killing immediately following exposure, but were chromosomally stable at delayed times post-irradiation. At this same delayed time, alterations in repeat element and global DNA methylation and miRNA expression were observed. Analyses of DNA methylation predominantly showed hypomethylation, however hypermethylation was also observed. We demonstrate that miRNA expression levels can be altered after X-ray irradiation and that these miRNA are involved in chromatin remodeling and DNA methylation. A higher incidence of epigenetic changes was observed after exposure to X-rays than Fe ions even though Fe ions elicited more chromosomal damage and cell killing. This distinction is apparent at miRNA analyses at which only three miRNA involved in two major pathways were altered after high LET irradiations while six miRNA involved in five major pathways were altered after low LET irradiations. This study also shows that the irradiated cells acquire epigenetic changes suggesting that epigenetic aberrations may arise

Evaluation of Radiometers Deployed at the National Renewable Energy Laboratory's Solar Radiation Research Laboratory

Energy Technology Data Exchange (ETDEWEB)

Habte, Aron; Wilcox, Stephen; Stoffel, Thomas

2015-12-23

This study analyzes the performance of various commercially available radiometers used for measuring global horizontal irradiances and direct normal irradiances. These include pyranometers, pyrheliometers, rotating shadowband radiometers, and a pyranometer with fixed internal shading and are all deployed at the National Renewable Energy Laboratory's Solar Radiation Research Laboratory. Data from 32 global horizontal irradiance and 19 direct normal irradiance radiometers are presented. The radiometers in this study were deployed for one year (from April 1, 2011, through March 31, 2012) and compared to measurements from radiometers with the lowest values of estimated measurement uncertainties for producing reference global horizontal irradiances and direct normal irradiances.

Radiation-Induced Epigenetic Alterations after Low and High LET Irradiations

Energy Technology Data Exchange (ETDEWEB)

Aypar, Umut; Morgan, William F.; Baulch, Janet E.

2011-02-01

Epigenetics, including DNA methylation and microRNA (miRNA) expression, could be the missing link in understanding the delayed, non-targeted effects of radiation including radiationinduced genomic instability (RIGI). This study tests the hypothesis that irradiation induces epigenetic aberrations, which could eventually lead to RIGI, and that the epigenetic aberrations induced by low linear energy transfer (LET) irradiation are different than those induced by high LET irradiations. GM10115 cells were irradiated with low LET x-rays and high LET iron (Fe) ions and evaluated for DNA damage, cell survival and chromosomal instability. The cells were also evaluated for specific locus methylation of nuclear factor-kappa B (NFκB), tumor suppressor in lung cancer 1 (TSLC1) and cadherin 1 (CDH1) gene promoter regions, long interspersed nuclear element 1 (LINE-1) and Alu repeat element methylation, CpG and non-CpG global methylation and miRNA expression levels. Irradiated cells showed increased micronucleus induction and cell killing immediately following exposure, but were chromosomally stable at delayed times post-irradiation. At this same delayed time, alterations in repeat element and global DNA methylation and miRNA expression were observed. Analyses of DNA methylation predominantly showed hypomethylation, however hypermethylation was also observed. MiRNA shown to be altered in expression level after x-ray irradiation are involved in chromatin remodeling and DNA methylation. Different and higher incidence of epigenetic changes were observed after exposure to low LET x-rays than high LET Fe ions even though Fe ions elicited more chromosomal damage and cell killing. This study also shows that the irradiated cells acquire epigenetic changes even though they are chromosomally stable suggesting that epigenetic aberrations may arise in the cell without initiating RIGI.

Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This test method is intended to be used for calibration and characterization of primary terrestrial photovoltaic reference cells to a desired reference spectral irradiance distribution, such as Tables G173. The recommended physical requirements for these reference cells are described in Specification E1040. Reference cells are principally used in the determination of the electrical performance of photovoltaic devices. 1.2 Primary photovoltaic reference cells are calibrated in natural sunlight using the relative spectral response of the cell, the relative spectral distribution of the sunlight, and a tabulated reference spectral irradiance distribution. 1.3 This test method requires the use of a pyrheliometer that is calibrated according to Test Method E816, which requires the use of a pyrheliometer that is traceable to the World Radiometric Reference (WRR). Therefore, reference cells calibrated according to this test method are traceable to the WRR. 1.4 This test method is a technique that may be used ...

Helium ion irradiated polyamidoimide films: a FT-IR and Raman follow-up

International Nuclear Information System (INIS)

Merhari, L.; Belorgeot, C.; Quintard, P.

1994-01-01

The evolution of polyamidoimide (PAI) at a molecular level has been studied by infrared and Raman spectroscopy after several He + ion irradiations. The infrared investigation made it possible to study the appearance of CO 2 and HCN molecules and, for example, to correlate CO 2 with C-O vanishing bands during He + ion irradiation. Preliminary Raman spectroscopy results confirmed a graphite-like structure for strongly irradiated PAI. In situ spectroscopic measurements versus fluence during irradiation with other ions are expected to give further information about the polymer structure evolution. (6 figures, 10 references) (UK)

Evaluation of irradiation measurements on tilted planes at PV systems in the Netherlands

NARCIS (Netherlands)

Betcke, J.W.H.; Dijk, V.A.P. van; Ramaekers, L.A.M.; Zolingen, R.J.C. van

1998-01-01

Monitoring data of Dutch PV systems in the field show lower values for the measured global irradiation in the array plane than expected from model calculatations. Since the locations of the PV systems contain obstacles, we expect that shielding of diffuse irradiation may cause the difference. For

Modelling 1-minute directional observations of the global irradiance.

Science.gov (United States)

Thejll, Peter; Pagh Nielsen, Kristian; Andersen, Elsa; Furbo, Simon

2016-04-01

Direct and diffuse irradiances from the sky has been collected at 1-minute intervals for about a year from the experimental station at the Technical University of Denmark for the IEA project "Solar Resource Assessment and Forecasting". These data were gathered by pyrheliometers tracking the Sun, as well as with apertured pyranometers gathering 1/8th and 1/16th of the light from the sky in 45 degree azimuthal ranges pointed around the compass. The data are gathered in order to develop detailed models of the potentially available solar energy and its variations at high temporal resolution in order to gain a more detailed understanding of the solar resource. This is important for a better understanding of the sub-grid scale cloud variation that cannot be resolved with climate and weather models. It is also important for optimizing the operation of active solar energy systems such as photovoltaic plants and thermal solar collector arrays, and for passive solar energy and lighting to buildings. We present regression-based modelling of the observed data, and focus, here, on the statistical properties of the model fits. Using models based on the one hand on what is found in the literature and on physical expectations, and on the other hand on purely statistical models, we find solutions that can explain up to 90% of the variance in global radiation. The models leaning on physical insights include terms for the direct solar radiation, a term for the circum-solar radiation, a diffuse term and a term for the horizon brightening/darkening. The purely statistical model is found using data- and formula-validation approaches picking model expressions from a general catalogue of possible formulae. The method allows nesting of expressions, and the results found are dependent on and heavily constrained by the cross-validation carried out on statistically independent testing and training data-sets. Slightly better fits -- in terms of variance explained -- is found using the purely

Determination of ancient ceramics reference material by neutron activation analysis

International Nuclear Information System (INIS)

Li Huhou; Sun Jingxin; Wang Yuqi; Lu Liangcai

1986-01-01

Contents of trace elements in the reference material of ancient ceramics (KPS-1) were determined by means of activation analysis, using thermal neutron irradiation produced in nuclear reactor. KPS-1 favoured the analysis of ancient ceramics because it had not only many kinds of element but also appropriate contents of composition. The values presented here are reliable within the experimental precision, and have shown that the reference material had a good homogeneity. So KPS-1 can be used as a suitable reference material for the ancient ceramics analysis

Physico-chemical changes in heavy ions irradiated polymer foils by differential scanning calorimetry

International Nuclear Information System (INIS)

Ciesla, K.; Trautmann, Ch.; Vansant, E.F.

1994-01-01

The sample of commercial PETP (Hostaphan) and very heavy ions irradiated products were investigated by differential scanning calorimetry in nitrogen flow. Irradiation were performed with Dy ions of 13 MeV/u with fluences 5 x 10 10 ions/cm 2 . Differences were observed in melting behaviour of unirradiated and irradiated foils. The influence of irradiation conditions on the results was noticed. Moreover the samples of polyimide (Kapton) and polycarbonate (Macrofol) irradiated in similar conditions were examined by DSC. The DSC traces have been compared with those of unirradiated reference samples. (author). 8 refs, 5 figs

Food irradiation: outlook for commercialization in the United States

International Nuclear Information System (INIS)

Giddings, G.G.

1985-01-01

An account is presented of the long-term and near-term outlooks for food irradiation in the United States, with particular reference to US regulatory status and to the problems of securing public acceptance of the process. Actions taken by international organizations to consider and determine whether irradiated food is wholesome are summarized. A table is included showing dose levels for various food applications. Political and sociological aspects are discussed. (U.K.)

Impurities effect on the swelling of neutron irradiated beryllium

International Nuclear Information System (INIS)

Donne, M.D.; Scaffidi-Argentina, F.

1995-01-01

An important factor controlling the swelling behaviour of fast neutron irradiated beryllium is the impurity content which can strongly affect both the surface tension and the creep strength of this material. Being the volume swelling of the old beryllium (early sixties) systematically higher than that of the more modem one (end of the seventies), a sensitivity analysis with the aid of the computer code ANFIBE (ANalysis of Fusion Irradiated BEryllium) to investigate the effect of these material properties on the swelling behaviour of neutron irradiated beryllium has been performed. Two sets of experimental data have been selected: the first one named Western refers to quite recently produced Western beryllium, whilst the second one, named Russian refers to relatively old (early sixties) Russian beryllium containing a higher impurity rate than the Western one. The results obtained with the ANFIBE Code were assessed by comparison with experimental data and the used material properties were compared with the data available in the literature. Good agreement between calculated and measured values has been found

Transportation of irradiated fuel elements

International Nuclear Information System (INIS)

1980-01-01

A critique is presented of current methods of transporting spent nuclear fuel and the inadequacies of the associated contingency plans, with particular reference to the transportation of irradiated fuel through London. Anti-nuclear and pro-nuclear arguments are presented on a number of factors, including tests on flasks, levels of radiation exposure, routine transport arrangements and contingency arrangements. (U.K.)

Terrestrial irradiation-sunshine duration clustering and prediction

International Nuclear Information System (INIS)

Sen, Zekai; Oeztopal, Ahmet

2003-01-01

The relationship between terrestrial irradiance and sunshine duration is not crisp and there are scatters around a general trend, which most often is expressed to occur in the form of a linear expression. This study presents a way of grouping the solar irradiation-sunshine duration data into convenient seasonal subgroups and then makes predictions within each of the groups quantitatively. In the classical Angstroem or other approaches, the seasonal variations are not considered, and therefore, rather global parameter estimations are obtained. However, the seasonal methodology of this paper provides more detailed interpretations in addition to seasonal effects and parameter estimations

Antioxidant Enhancement of Some Arabic Date Varieties by Using Gamma Irradiation in Reference to Microbial Infection During Storage

International Nuclear Information System (INIS)

Farag, S.A.; Abd EL-Magide, A.E.; Ahmed, G.B.

2014-01-01

Three semi-dry date varieties from Egypt (Siwi), Saudi Arabia (Sukkary) and Iraq (Zahdi) at t amr s tage were irradiated with safety low doses (3 and 5 kGy), as alternative for pesticides, for decontamination of molds and consequently improving the quality for human consumption. Gamma irradiated samples were analyzed for antioxidants (AA) mainly flavonoids and phenolic compounds and also for microbiological and mycotoxin contents. The detection of fungi revealed the presence of seven species of pathogenic fungi with high levels in non-irradiated dates such as Fusarium spp., Aspergillus parasiticus, A. flavus, A. niger, Penicillium spp., Cladosporium spp. and Mucor spp. Siwi variety (Egyptian) was contaminated more than Sukkary (Saudi Arabian). Gamma irradiation was more affecting in decontamination of molds in most samples especially at 5 kGy. Also, the presence of aflatoxins (AFT) resulted as B1, B2 and OTA in Egyptian dates (Siwi) while in contrary, some AFT were absent in Sukkary (Saudi Arabian). The results proved that AFT concentration of tested samples was less than the recommended dose (20 ppb) as reduced by gamma irradiation dose (5 kGy). HPLC analysis of AA (falvonoids and phenols) in three date verities proved the presence of 15 compounds such as quarctin, ferulic, caffeic, salicylic, eugonal, chatechol, chrysic, gallic, pyrogallic, protochechol, eugonol, syrining, rutinol, phenol and cumaric. The concentration of AA (mg/100 g) depends on variety. The enhancement % by irradiation was more clear with Sukkary (Saudi Arabian) than Siwi (Egyptian) or Zahdi (Iraqi). AA were enhanced strongly by irradiation dose of 5 kGy in all contents and the increase in AA concentration in date fruits decreased the growth of fungi counts or excretion of aflatoxins in selected samples of Siwi and Sukkary varieties. The increase in AA goes in parallel with the decrease in tannins content of most varieties during storage for 4 or 8 months. It could be concluded that using gamma

1-Chloronaphthalene decomposition in air using electron beam irradiation

International Nuclear Information System (INIS)

Chmielewski, A.G.; Sun, Y.; Bulka, S.; Zimek, Z.

2006-01-01

A method for the preparation of model gas containing 1-chloronaphthalene can be referred to 1,1-DCE (dichloroethene). A pulsed electron beam (EB) accelerator ILU-6 (2.0 MeV max., 20 kW max.) was used as an irradiation source. The absorbed dose rate inside the irradiation vessel was 10.835 kGy/min. Total absorbed dose was adjusted by changing irradiation time of the Pyrex glass vessels. 1-Chloronaphthalene concentration was analyzed using gas-chromatography. It has been found, that 1-chloronaphthalene can be decomposed in air or N 2 using EB irradiation. Decomposition efficiency of 1-chloronaphthalene in air is higher than that in N 2 . Positive charge transfer reactions and OH radicals' reaction may play a main role in 1-chloronaphthalene decomposition process

Current status of food irradiation in the world. Trend in Asia

International Nuclear Information System (INIS)

Kume, Tamikazu

2002-01-01

This review describes the current status of food irradiation in the world and particularly, its trends in Asia, based on the report of the economic scale investigation on the irradiation in United States and Japan (2001) and on the information of 12th International Meeting on Radiation Processing in France in 2001 and on personal communications. International Consultative Group on Food Irradiation promotes its activities of irradiation globally and 46 countries are affiliated. Food irradiation is allowed in 52 countries. In 1999, 257,000 t of food is irradiated in the world, of which 1/3 is due to spice. The facilities for the irradiation have such sources as 60 Co and 137 Cs γ-rays, electron beam of <10 MeV and X-ray with <5 MeV. Detection methods of irradiated foods are summarized by the project of Analytical Detection Methods for Irradiation Treatment of Foods. The US is the most advanced country in the irradiation and, in Japan, only irradiation of potato is permitted. The detailed present status is also described of Bangladesh, China (the irradiation is most widely conducted in the world), India, Indonesia, Korea, Malaysia, Thailand and Vietnam. Recently Australia and New Zealand have started the irradiation. (K.H.)

Prospective randomized comparison of single-dose versus hyperfractionated total-body irradiation in patients with hematologic malignancies

International Nuclear Information System (INIS)

Girinsky, T.; Benhamou, E.; Bourhis, J.H.; Dhermain, F.; Guillot-Valls, D.; Ganansia, V.; Luboinski, M.; Perez, A.; Cosset, J.M.; Socie, G.; Baume, D.; Bouaouina, N.; Briot, E.; Baudre, A.; Bridier, A.; Pico, J.L.

2001-01-01

The efficiency of the two irradiation modes are similar, but the hyperfractionated irradiation seems superior in term of global and specific survival. The incidence rates of pneumopathies are not different between the two groups but the incidence rate of the liver vein-occlusive illness is superior in the group treated by non fractionated whole body irradiation. The cost of the hyperfractionated whole body irradiation is superior to this one of the non fractionated whole body irradiation around a thousand dollars. (N.C.)

Cosmic rays and global warming

Energy Technology Data Exchange (ETDEWEB)

Erlykin, A.D. [P.N. Lebedev Physical Institute, Moscow (Russian Federation); Sloan, T. [Lancaster University (United Kingdom); Wolfendale, A.W. [Durham University (United Kingdom)

2010-07-01

The possible effects of cosmic rays on clouds could contribute to global warming. The argument is that the observed increased solar activity during the last century caused a decrease in the ionization due to cosmic rays since the lower energy cosmic particles are deflected by the magnetic field created by the increasing solar wind. This would lead to a decrease in cloud cover allowing more heating of the earth by the sun. Meteorological data combined to solar activity observations and simulations show that any effect of solar activity on clouds and the climate is likely to be through irradiance rather than cosmic rays. Since solar irradiance transfers 8 orders of magnitude more energy to the atmosphere than cosmic rays it is more plausible that this can produce a real effect. The total contribution of variable solar activity to global warming is shown to be less than 14% of the total temperature rise. (A.C.)

Acceptance of food irradiation in western markets

Energy Technology Data Exchange (ETDEWEB)

Ting, H H [PURIDEC Irradiation Technologies, Buckinghamshire, England (United Kingdom)

1997-12-31

This paper reviews the status and acceptance of food irradiation worldwide, focusing on Europe and the United States. Today no less than 38 countries including the USA and 14 European countries, have approved the irradiation of food. Across Europe there is a very wide variation, with a variety of foods being irradiated and eaten in Belgium and France but a total ban on food irradiation in Germany. Progress towards a directive harmonising the position across all countries in the European Union is slow. In the USA there is a growing awareness of the advantages of using food irradiation to combat the increasing risk of the food-borne diseases, and media coverage and consumer attitudes are considerably more favourable than previously. The use of irradiation instead of pesticides for spice treatment is gaining acceptance within the North American spice industry and the NA meat industry is recognising the potential of food irradiation as one way of meeting its obligations under the new HACCP regulations. Food irradiation is also being seriously considered as an alternative to the use of methyl bromide for quarantine treatment of fruit and vegetables. The establishment of the World Trade Organisation in 1995 to enforce various agreements concluded during the GATT Uruguay Round is expected to impact trade liberalisation. In particular the agreements pertaining to the Application of Sanitary and Phytosanitary Measures (SPS) and on Technical Barriers to Trade (TBT) have particular reference to track in irradiated food. In this respect, it is particularly important for potential training partners (food producing countries) to ensure that they have domestic approvals in place for any irradiated foods they provide to western countries. (author). countries. (author).

Acceptance of food irradiation in western markets

International Nuclear Information System (INIS)

Ting, H.H.

1996-01-01

This paper reviews the status and acceptance of food irradiation worldwide, focusing on Europe and the United States. Today no less than 38 countries including the USA and 14 European countries, have approved the irradiation of food. Across Europe there is a very wide variation, with a variety of foods being irradiated and eaten in Belgium and France but a total ban on food irradiation in Germany. Progress towards a directive harmonising the position across all countries in the European Union is slow. In the USA there is a growing awareness of the advantages of using food irradiation to combat the increasing risk of the food-borne diseases, and media coverage and consumer attitudes are considerably more favourable than previously. The use of irradiation instead of pesticides for spice treatment is gaining acceptance within the North American spice industry and the NA meat industry is recognising the potential of food irradiation as one way of meeting its obligations under the new HACCP regulations. Food irradiation is also being seriously considered as an alternative to the use of methyl bromide for quarantine treatment of fruit and vegetables. The establishment of the World Trade Organisation in 1995 to enforce various agreements concluded during the GATT Uruguay Round is expected to impact trade liberalisation. In particular the agreements pertaining to the Application of Sanitary and Phytosanitary Measures (SPS) and on Technical Barriers to Trade (TBT) have particular reference to track in irradiated food. In this respect, it is particularly important for potential training partners (food producing countries) to ensure that they have domestic approvals in place for any irradiated foods they provide to western countries. (author). countries. (author)

Trial intercountry shipment of irradiated spices

Energy Technology Data Exchange (ETDEWEB)

Saputra, T S; Maha, Munsiah; Purwanto, Z I; Parkas, J

1984-10-01

An experiment has been carried out to evaluate the quality of irradiated spices packaged in some indigenous packaging materials. Spices used were whole nutmeg (myristica fragrans) and whole white pepper (piper nigrum). The spice samples were packaged in tin containers with or without oxygen absorber and in woven polypropylene (PP) bags, then irradiated at 5 kGy, and despatched from Jakarta to Wagenigen by sea-freight. The shipment was performed in small and commercial size packages. The results showed that irradiation treatment could effectively disinfest and decontaminate spices without altering their chemical composition and sensory properties. PP bags, particularly the one without inner liner, were unable to withstand rough handling and to prevent reinfestation during shipment. Tin containers were able to withstand rough handling and prevent reinfestation. The oxygen absorber used had no effect on microbial count and other parameters of the spices. 21 references.

Validation of Global Lung Function Initiative and All Ages Reference Equations for Forced Spirometry in Healthy Spanish Preschoolers.

Science.gov (United States)

Martín de Vicente, Carlos; de Mir Messa, Inés; Rovira Amigo, Sandra; Torrent Vernetta, Alba; Gartner, Silvia; Iglesias Serrano, Ignacio; Carrascosa Lezcano, Antonio; Moreno Galdó, Antonio

2018-01-01

Recent publication of multi-ethnic spirometry reference equations for subjects aged from 3-95 years aim to avoid age-related discontinuities and provide a worldwide standard for interpreting spirometric test results. To assess the agreement of the Global Lung Function Initiative (GLI-2012) and All ages (FEV 0.5 ) reference equations with the Spanish preschool lung function data. To verify the appropriateness of these reference values for clinical use in Spanish preschool children. Spirometric measurements were obtained from children aged 3 to 6 years attending 10 randomly selected schools in Barcelona (Spain). Stanojevic's quality control criteria were applied. Z-scores were calculated for the spirometry outcomes based on the GLI equations. If the z-score (mean) of each parameter was close to 0, with a maximum variance of ± 0.5 from the mean and a standard deviation of 1, the GLI-2012 equations would be applicable in our population. Of 543 children recruited, 405 (74.6%) were 'healthy', and of these, 380 were Caucasians. Of these 380, 81.6% (169 females, 141 males) performed technically acceptable and reproducible maneuvers to assess FEVt, and 69.5% achieved a clear end-expiratory plateau. Z-scores for FVC, FEV 1 , FEV 1 /FVC, FEV 0.75 , FEV 0.75 /FVC, FEV 0.5 , FEF 75 and FEF 25-75 all fell within ± 0.5, except for FEV 1 /FVC (0.53 z-scores). GLI equations are appropriate for Spanish preschool children. These data provide further evidence to support widespread application of the GLI reference equations. Copyright © 2017 SEPAR. Publicado por Elsevier España, S.L.U. All rights reserved.

Influence of the irradiation temperature on the free-radical response of alanine

International Nuclear Information System (INIS)

Wieser, A.; Siegele, R.; Regulla, D.F.

1989-01-01

GSF operates the only IAEA high-level dosimetry reference laboratory and, as a joint project with the IAEA, the International Dose Assurance Service (IDAS). Dosimetry is based on long-lived free radicals in organic alanine induced by ionizing radiation and readout by ESR spectroscopy. The thermal time response of the radical concentration in alanine is fairly constant after irradiation provided that the alanine samples are stored at temperatures below 50 0 C. By contrast, a positive temperature coefficient had earlier been found at GSF for the production rate of alanine radicals, for irradiation temperatures between 0 and 50 0 C. This effect has to be considered for reference dosimetry in radiation processing. Radiation processing is also of interest at irradiation temperatures below 0 0 C. The present study describes experiments on the influence of irradiation temperatures between +50 and -100 0 C. Comparison is made between the present and earlier results, in the overlapping temperature range. An empirical function is proposed for the temperature coefficient based on the experimental data. (author)

Effects of irradiation on degradation and migration of food packaging plastics

International Nuclear Information System (INIS)

Li Xifeng; Cai Zhongli

1997-01-01

The author summarizes the research achievements on the following aspects: detection and identification of low molecular radiolysis products of food packaging polymers and degradation products of plastic additives, influences of irradiation atmosphere, dose, dose rate, additives and food simulant on the formation of products, and effects of irradiation on global and specific migration of packaging materials. Some items are suggested to be further studied

Constructing the [Parochial] Global Citizen

Science.gov (United States)

Salter, Peta; Halbert, Kelsey

2017-01-01

Cultural exchange is privileged in many higher education programs across the globe. The Australian government's New Colombo Plan refers to a "Third Wave" of globalisation which foregrounds global interrelatedness through developing student capabilities to live, work and contribute to global communities and aims to make the global an…

Food irradiation newsletter. V. 19, no. 2

International Nuclear Information System (INIS)

1995-10-01

A number of important developments on food irradiation has been included in this issue of the Newsletter. First, the updated computerized list of clearance of irradiated food in different countries is published as a Supplement to this issue. The readers are requested to inform the Food Preservation Section of any mistakes in the list as soon as possible. Our experience with the list which was last published in 1991 showed that it has a strong demand by scientists, regulatory authorities, consumer groups and the media. The list therefore must be accurate as it is often referred to in literature

Biliary and pancreatic secretions in abdominal irradiation

International Nuclear Information System (INIS)

Becciolini, A.; Cionini, L.; Cappellini, M.; Atzeni, G.

1979-01-01

The biliary and pancreatic secretions have been determined in patients given pelvic or para-aortic irradiation, with a dose of 50 Gy in the former group and between 36 and 40 Gy in the latter. A test meal containing polyethylene glycol (PEG) as reference substance was used. Each sample of the duodenal content was assayed for volume, PEG content, amylase and trypsin activity, pH and biliary secretion. No significant modifications of biliary and pancreatic secretions were demonstrated after irradiation, suggesting that these functions are not involved in the pathogenesis of the malabsorption radiation syndrome. (Auth.)

Food irradiation newsletter. V. 19, no. 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-10-01

A number of important developments on food irradiation has been included in this issue of the Newsletter. First, the updated computerized list of clearance of irradiated food in different countries is published as a Supplement to this issue. The readers are requested to inform the Food Preservation Section of any mistakes in the list as soon as possible. Our experience with the list which was last published in 1991 showed that it has a strong demand by scientists, regulatory authorities, consumer groups and the media. The list therefore must be accurate as it is often referred to in literature.

Weather Test Reference Year of Greenland

DEFF Research Database (Denmark)

Kragh, Jesper; Pedersen, Frank; Svendsen, Svend

2005-01-01

the construction of two test reference years of Greenland used in the work of establishing new energy frame for the coming building code of Greenland. The first test reference year is constructed using measurements of climatic parameters from the town Nuuk located in the southwestern part of Greenland. The second...... test reference year is constructed using measurements from the town Uummannaq located in the north part of Greenland on the west coast. The construction of the test reference years fulfills the procedures described in the standard EN ISO 15927-4 using the following main weather parameters: Dry bulb...... temperature, global radiation, relative humidity and mean wind speed. To construct the test reference years a program called REFYEAR was developed in MatLab. REFYEAR automatically constructs the test reference year using an input file containing the climatic measurements. The two constructed test reference...

Irradiation facilities on the TRIGA-SSR thermal column

Energy Technology Data Exchange (ETDEWEB)

Roth, C; Aioanei, L; Preda, M; Gugiu, D [Institute for Nuclear Research, Pitesti (Romania); Garlea, I; Kelerman, C; Garlea, C [SENDRA ' Nuclear Technologies' ltd. Bucharest (Romania)

2004-07-01

The development of thermal and intermediate energy neutron irradiation facilities at the steady state core of the Romanian TRIGA Reactor is described. The reference thermal neutron irradiation facility consists of a dry spherical cavity placed into the graphite thermal column of the SSR core and the intermediate energy neutron irradiation facility is a {sigma}{sigma} system located into the thermal flux cavity. The implementation of the irradiation facilities into the under-water thermal column represented an important challenge from the standpoint of instrumentation solutions. The neutron flux and spectrum measurements were performed using foil activation techniques and fission rate measurements by sealed fission chambers, followed by spectrum unfolding procedure. The absolute fission reaction measurements, using calibrated fission chambers, allow the neutron flux density unit transfer from international reference neutron fields. The MCNP-4C code package was used for neutron spectrum computations in the thermal flux cavity and in the {sigma}{sigma} system. The neutron characterization program demonstrates the accuracy of the spectrum characteristics and neutron flux densities reported to the local monitoring system count rates. Some discrepancies, as compared to other similar facilities, were identified and discussed. These are caused by thermal column particularities: the presence of a water layer between the graphite cells (thermal neutron absorption) and smaller geometrical dimensions (neutron escape phenomena). Based on these results the metrological certification process, according to Romanian metrological laws requirements, is now in progress. (nevyjel)

Comparison of Pyranometers and Reference Cells on Fixed and One-Axis Tracking Surfaces: Preprint

Energy Technology Data Exchange (ETDEWEB)

Dooraghi, Michael R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sengupta, Manajit [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Vignola, Frank [University of Oregon; Peterson, Josh [University of Oregon; Mavromatakis, Fotis [Technological Educational Institute of Crete; Chiu, Chun-Yu [University of Oregon

2017-12-19

A wide variety of sensors are used to monitor the irradiance incident on solar modules to evaluate the performance of photovoltaic (PV) systems. These instruments range from secondary standard pyranometers to photodiode-based pyranometers to reference cells. Although instruments are mounted in the plane of array of the modules, a wide range of results have been obtained. Some of these difference have been assumed to come from systematic uncertainties associated with the irradiance sensors. This study is an attempt to quantify these differences by comparing the output of selected thermopile pyranometers to photodiode-based pyranometers and reference cells on a horizontal surface, a fixed-tilt surface, and a one-axis tracking surface. This analysis focuses on clear-sky results from two sites with different climatic conditions. Several important features were observed. Photodiode-based pyranometers and reference cells produce widely different results under clear skies, especially at larger angles of incidence, even though both instruments are based on measuring the short-circuit current of solar cells. The difference is caused by the scattering of light as it passes through the glazing of the reference cell or the diffuser lens of the photodioded-base pyranometer. Both instruments are shown to have similar response to the spectral distribution of the irradiance when compared to the thermopile-based pyranometer, which has a response nearly independent of the wavelength of light used by PV modules.

Use of radiosensitivity to identify irradiated fresh poultry products

International Nuclear Information System (INIS)

Copin, M.P.; Bourgeois, C.M.

1991-01-01

Microbiological comparison between irradiated and non-irradiated foodstuff has been studied for a long time as a way to detect whether a foodstuff has been irradiated or not. Generally, the proposed methods are based on the fact that ionization select species of bacteria which are recognized to be radioresistant. So reduction or elimination of known radiation sensitive microbes from the normal endogenous microflora could give an indication that the foodstuff has been irradiated, predominance of known radioresistant bacteria should be another indication. In the present work, we try to develop a test based on the radiosensitivity of the bacteria independently of their place. These first experiments show that the determination of radiosensitivity of strains isolated from a product or even of global radioresistance of mesophilic microflora could indicate if this product has been previously submitted to ionizing radiations. (4 tabs)

"Competing Conceptions of Globalization" Revisited: Relocating the Tension between World-Systems Analysis and Globalization Analysis

Science.gov (United States)

Clayton, Thomas

2004-01-01

In recent years, many scholars have become fascinated by a contemporary, multidimensional process that has come to be known as "globalization." Globalization originally described economic developments at the world level. More specifically, scholars invoked the concept in reference to the process of global economic integration and the seemingly…

Influence of specimen size/type on the fracture toughness of five irradiated RPV materials

International Nuclear Information System (INIS)

Sokolov, Mikhail A; Lucon, Enrico

2015-01-01

The Heavy-Section Steel Irradiation (HSSI) Program had previously irradiated five reactor pressure vessel (RPV) steels/welds at fast neutron fluxes of about 4 to 8 x 10 11 n/cm 2 /s (>1 MeV) to fluences from 0.5 to 3.4 10 19 n/cm 2 and at 288 °C. The unirradiated fracture toughness tests were performed by Oak Ridge National Laboratory with 12.7-mm and 25.4-mm thick (0.5T and 1T) compact specimens, while the HSSI Program provided tensile and 5 x 10-mm three-point bend specimens to SCK-CEN for irradiation in the in-pile section of the Belgian Reactor BR2 at fluxes > 10 13 n/cm 2 /s and subsequent testing by SCK-CEN. The BR2 irradiations were conducted at about 2 and 4 x 10 13 n/cm 2 /s with irradiation temperature between 295 °C and 300 °C (water temperature), and to fluences between 6 and 10 x 10 19 n/cm 2 . The irradiation-induced shifts of the Master Curve reference temperatures, ΔT 0 , for most of the materials deviated from the embrittlement correlations much more than expected, motivating the testing of 5 x 10-mm three-point bend specimens of all five materials in the unirradiated condition to eliminate specimen size and geometry as a variable. Tests of the unirradiated small bend specimens resulted in Master Curve reference temperatures, ΔT 0 , 25 °C to 53 °C lower than those from the larger compact specimens, meaning that the irradiation-induced reference temperature shifts, ΔT 0 , were larger than the initial measurements, resulting in much improved agreement between the measured and predicted fracture toughness shifts.

Educating for Responsible Global Citizenship.

Science.gov (United States)

Drake, Christine

1987-01-01

Discusses geographical illiteracy in the United States and the problems of inadequate international awareness and poor understanding of major global issues. Examines what citizens should know, why they should care, and what people should do about the lack of global knowledge. Presents a list of 57 references dealing with global issues. (GEA)

Neutron irradiation creep in stainless steel alloys

Energy Technology Data Exchange (ETDEWEB)

Schuele, Wolfgang (Commission of the European Union, Institute for Advanced Materials, I-21020 Ispra (Vatican City State, Holy See) (Italy)); Hausen, Hermann (Commission of the European Union, Institute for Advanced Materials, I-21020 Ispra (Vatican City State, Holy See) (Italy))

1994-09-01

Irradiation creep elongations were measured in the HFR at Petten on AMCR steels, on 316 CE-reference steels, and on US-316 and US-PCA steels varying the irradiation temperature between 300 C and 500 C and the stress between 25 and 300 MPa. At the beginning of an irradiation a type of primary'' creep stage is observed for doses up to 3-5 dpa after which dose the secondary'' creep stage begins. The primary'' creep strain decreases in cold-worked steel materials with decreasing stress and decreasing irradiation temperature achieving also negative creep strains depending also on the pre-treatment of the materials. These primary'' creep strains are mainly attributed to volume changes due to the formation of radiation-induced phases, e.g. to the formation of [alpha]-ferrite below about 400 C and of carbides below about 700 C, and not to irradiation creep. The secondary'' creep stage is found for doses larger than 3 to 5 dpa and is attributed mainly to irradiation creep. The irradiation creep rate is almost independent of the irradiation temperature (Q[sub irr]=0.132 eV) and linearly dependent on the stress. The total creep elongations normalized to about 8 dpa are equal for almost every type of steel irradiated in the HFR at Petten or in ORR or in EBR II. The negative creep elongations are more pronounced in PCA- and in AMCR-steels and for this reason the total creep elongation is slightly smaller at 8 dpa for these two steels than for the other steels. ((orig.))

Neutron Irradiation Tests of Calibrated Cryogenic Sensors at Low Temperatures

CERN Document Server

Junquera, T; Thermeau, J P; Casas-Cubillos, J

1998-01-01

This paper presents the advancement of a program being carried out in view of selecting the cryogenic temperature sensors to be used in the LHC accelerator. About 10,000 sensors will be installed around the 26.6 km LHC ring, and most of them will be exposed to high radiation doses during the accelerator lifetime. The following thermometric sensors : carbon resistors, thin films, and platinum resistors, have been exposed to high neutron fluences (>10$^15$ n/cm$^2$) at the ISN (Grenoble, France) Cryogenic Irradiation Test Facility. A cryostat is placed in a shielded irradiation vault where a 20 MeV deuteron beam hits a Be target, resulting in a well collimated and intense neutron beam. The cryostat, the on-line acquisition system, the temperature references and the main characteristics of the irradiation facility are described. The main interest of this set-up is its ability to monitor online the evolution of the sensors by comparing its readout with temperature references that are in principle insensitive to t...

Design, Fabrication, and Initial Operation of a Reusable Irradiation Facility

International Nuclear Information System (INIS)

Heatherly, D.W.; Thoms, K.R.; Siman-Tov, I.I.; Hurst, M.T.

1999-01-01

A Heavy-Section Steel Irradiation (HSSI) Program project, funded by the US Nuclear Regulatory Commission, was initiated at Oak Ridge National Laboratory to develop reusable materials irradiation facilities in which metallurgical specimens of reactor pressure vessel steels could be irradiated. As a consequence, two new, identical, reusable materials irradiation facilities have been designed, fabricated, installed, and are now operating at the Ford Nuclear Reactor at the University of Michigan. The facilities are referred to as the HSSI-IAR facilities with the individual facilities being designated as IAR-1 and IAR-2. This new and unique facility design requires no cutting or grinding operations to retrieve irradiated specimens, all capsule hardware is totally reusable, and materials transported from site to site are limited to specimens only. At the time of this letter report, the facilities have operated successfully for approximately 2500 effective full-power hours

Low temperature electron beam irradiation effects on the lactate dehydrogenase activity

International Nuclear Information System (INIS)

Catana, D.; Hategan, Alina; Oproiu, C.; Popescu, Alina; Hategan, Dora; Morariu, V. V.

1998-01-01

The direct and indirect effects of 5 MeV electron beam irradiation in the range 0-400 Gy at 20 deg. C, -3 deg. C and -196 deg. C on the global enzymatic activity of lactate dehydrogenase (LDH) have been studied. Our results showed a monoexponential decrease in the enzymatic activity of irradiated LDH at all irradiation temperatures independently of direct or indirect action of radiation. The temperature gradient used to lower the temperature of the samples to -196 deg. C drastically influences the results. Our data suggest that freeze-thawing in two steps down to -196 deg. C make LDH insensitive to irradiation, while one step freeze-thawing procedure results in a gradual activity loss with increasing dose irradiation. This data can be interpreted in terms of different conformational changes during the particular freeze-thawing process. (authors)

Detection and measurement of neutron-irradiated gemstones

International Nuclear Information System (INIS)

Bunnak, S.; Jerachanchai, S.; Chinudomsub, K.; Saiyut, K.

1990-01-01

Color enhance gemstone, neutron-irradiated topaz, was analyzed by gamma spectrometry for examining characteristic and activity. Topaz was irradiated in the wet-tube facility of the Research Reactor TRR/1 which neutron fluence is 2.52x10 17 neutron per square centimeter. After 100 days of decay, topaz was sampling to the qualitative and quantitative analysis using multichannel analyzer of Nuclear Data Model ND65 and hyper pure germanium detector. Calculation and evaluation were done by microcomputer IBM/PC 640 KB RAM. The qualitative analysis showed that the neutron-irradiated topaz has 2 major isotopes, i.e., Ta-182 and Sc-46. Quantitative activity was compared with reference standard source Eu-152 (NBS) and the results were shown in the table 1. The Health Physics Division, OAEP, inspected on 6240.9 gm of the neutron-irradiated topaz using standard release limit 2 nCi/gm (74 Bq/gm). It was found that only 423.9 gm out of the total amount were over the standard release limit

Globalization

DEFF Research Database (Denmark)

Plum, Maja

Globalization is often referred to as external to education - a state of affair facing the modern curriculum with numerous challenges. In this paper it is examined as internal to curriculum; analysed as a problematization in a Foucaultian sense. That is, as a complex of attentions, worries, ways...... of reasoning, producing curricular variables. The analysis is made through an example of early childhood curriculum in Danish Pre-school, and the way the curricular variable of the pre-school child comes into being through globalization as a problematization, carried forth by the comparative practices of PISA...

Effect of γ-irradiation on the physicochemical properties and structure of fish myofibrillar proteins

Science.gov (United States)

Shi, Yan; Li, Ru-yi; Tu, Zong-cai; Ma, Da; Wang, Hui; Huang, Xiao-qin; He, Na

2015-04-01

The influence of γ-irradiation on physicochemical properties and structures of myofibrillar protein from grass crap exposed to dose up to 10 kGy was investigated. Irradiated samples exhibited decreased emulsifying property and increased surface hydrophobicity. Increasing dose resulted in decreasing free and total sulphydryl groups, decreasing myosin heavy chains in the sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) patterns. This study demonstrated that γ-irradiation decreased the myofibrillar protein ordered structure and generated the crosslinking and provided a possible reference for the identification of irradiated fish products.

High-dose irradiation: Wholesomeness of food irradiated with doses above 10 kGy. Report of a joint FAO/IAEA/WHO study group

International Nuclear Information System (INIS)

1999-01-01

This report presents the recommendations of an international group of experts convened by the World Health Organization, in association with the Food and Agriculture Organization of the United Nations and the International Atomic Energy Agency, to consider the implications of food irradiated to doses higher than those recommended in 1980 by the Joint Expert Committee on the Wholesomeness of Irradiated Food. Irradiation ensures the hygienic quality of food and extends shelf-life. The public perception of the safety of food irradiation has generally precluded its widespread use. However, current applications of food irradiation to doses over 10 kGy have been in the development of high-quality shelf-stable convenience foods for specific target groups such as immunosuppressed individuals and those under medical care, astronauts and outdoor enthusiasts. The Study Group reviewed data relating to the toxicological, nutritional, radiation chemical and physical aspects of food irradiated to doses above 10kGy from a wide range and number of studies carried out over the last forty years. This report presents a comprehensive summary, along with references, of the effectiveness and safety of the irradiation process. It concludes that foods treated with doses greater than 10kGy can be considered safe and nutritionally adequate when produced under established Good Manufacturing Practice

Identification methods of irradiated food

International Nuclear Information System (INIS)

Raffi, J.J.

1991-01-01

After a general review of the different possible methods, the stress is put upon the ones close to application: electron spin resonance, thermoluminescence and method of lipids. The problem of the specificity of each method is discussed (proof or presumption): they are then placed in the context of the programme of identification of irradiated foods just co-organized by the author with the Community Bureau of Reference (CEC) [fr

Regulations in the field of food irradiation

International Nuclear Information System (INIS)

1991-02-01

The material available for this review, as well as the Guidelines for Preparing Regulations for the Control of Food Irradiation Facilities adopted by ICGFI, the international Conference Document on the Acceptance, Control of and Trade in Irradiated Food, the draft European Economic Community Directive and the Codex General Standard and Code of Practice on food irradiation suggest that the following aspects may be subject to regulation: Food irradiation licensing, radiation safety, food hygiene, package labelling, inspection, certification for commercial purposes. The purpose of this review is to provide Member States with the information necessary for and special to the control of food processing by irradiation, so as to enable them to ensure that they have or they can adopt effective regulations governing all aspects of trade in irradiated food. Three countries have introduced in their food laws special provisions to regulate the processing of food by radiation. Twenty-three countries have issued such special regulations under the existing statutory authority of one of the executive branches: Seven countries either by reference or by incorporation in whole or in part in their regulations, gave recognition to the Codex Standard and Code of Practice. The absence of such specific recognition should not be interpreted, however, to mean that those countries have not accepted the Codex recommendations. Many provisions seem to have taken the Codex recommendations as a guide. 16 refs

Food irradiation in Romania - Achievements and expectations

International Nuclear Information System (INIS)

Ferdes, O.S.

1993-01-01

Irradiation or ionization of foodstuffs and agricultural products is an efficient but controversial method which can lead to the post-harvest spoilages reduction, the extension of shelf-life and to provide the food safety. This paper presents the status of food irradiation research and technologies in our country, and throughout the world, too. In Romania the food processing by irradiation (ionization) is not used for commercial purposes and there are not food irradiation plants, yet. There have been performed only research and pilot-experiments, only by the Institute of Food Research in co-operation and using the 6 0C o gamma-ray sources of the Institute of Chemical and Pharmaceutical Research and the Institute of Physics and Nuclear Engineering, both from Bucharest. These experiments have referred both to the basic aspects of the ionizing radiation interactions with the food essential constituents and to the technological aspects of irradiation from different items like: potatoes, onions, garlic, grain, cereals, wheat flour, fresh and dehydrated fruits and vegetables, mushrooms, meat, eggs, spices, ingredients, and biotechnological products. There are also presented the advantages and disadvantages of food irradiation, the world trends in this field and the future in Romania of this technology which was named, in 1989, by the Institute of Food Technologies (US), t he most versatile technology of the 20 -th Century, for tomorrow . (Author)

Estimations of the Global Distribution and Time Series of UV Noontime Irradiance (305, 310, 324, 380 nm, and Erythemal) from TOMS and SeaWiFS Data

Science.gov (United States)

Herman, J.

2004-01-01

The amount of UV irradiance reaching the Earth's surface is estimated from the measured cloud reflectivity, ozone, aerosol amounts, and surface reflectivity time series from 1980 to 1992 and 1997 to 2000 to estimate changes that have occurred over a 21-year period. Recent analysis of the TOMS data shows that there has been an apparent increase in reflectivity (decrease in W) in the Southern Hemisphere that is related to a calibration error in EP-TOMS. Data from the well-calibrated SeaWiFS satellite instrument have been used to correct the EP-TOMS reflectivity and UV time series. After correction, some of the local trend features seen in the N7 time series (1980 to 1992) have been continued in the combined time series, but the overall zonal average and global trends have changed. In addition to correcting the EP-TOMS radiance calibration, the use of SeaWiFS cloud data permits estimation of UV irradiance at higher spatial resolution (1 to 4 km) than is available from TOMS (100 km) under the assumption that ozone is slowly varying over a scale of 100 km. The key results include a continuing decrease in cloud cover over Europe and North America with a corresponding increase in UV and a decrease in UV irradiance near Antarctica.

Experimental study of the long-term effects of cephalic irradiation on local cerebral circulation. Preliminary results

International Nuclear Information System (INIS)

Dufour, R.

1978-01-01

The purpose of this experimental study was to follow the effects of fractionated cehalic irradiation (average dosee 100 rads) on local cerebral blood circulation. Observations were made on unanaesthetized rabbits in terms of two circulatory responses, one of which is associated with rapid eye movement sleep and the other produced by inhalation of a mixture of air and 5% carbon dioxide. Both responses take the form of a characteristic increase in cerebral flow. The method of measuring variations in local cerebral flow relies on changes in the thermal conduction of cerebral tissue associated with the changes in circulation. Placement of the measuring probes entails fixation of electrodes for deriving the cortical and hippocampal electroencephalographic activity. The prreliminary results refer to two animalswhich were subjected to three andd four cephalic irradiations off 1000 rads, spaced at least a month apart, at a dose rate of 70 rad min -1 . The increase and the rate of increase of cerebral flow during rapid eye movement sleep and COBinhalation proved significantly greater than the reference values from the third month on (after the second irradiation) in the case of one animal and from the sixth month on (after the third irradiation) in the case of the other. The response during rapid eye movement sleep was equal to 140% of the reference amplitude during the two observation periods in the first case, and to 110 and 150% respectively after the third and fourth irradiations in the second case. The CO 2 response was 140% of the reference value during the two observation periods in the first case, and 135% after the third and fourth irradiations in the second case. The functional significance of these changes in cerebral output is analysed in terms of the regulation of cerebral circulation. (author)

ORR irradiation experiment OF-1: accelerated testing of HTGR fuel

International Nuclear Information System (INIS)

Tiegs, T.N.; Long, E.L. Jr.; Kania, M.J.; Thoms, K.R.; Allen, E.J.

1977-08-01

The OF-1 capsule, the first in a series of High-Temperature Gas-Cooled Reactor fuel irradiations in the Oak Ridge Research Reactor, was irradiated for more than 9300 hr at full reactor power (30 MW). Peak fluences of 1.08 x 10 22 neutrons/cm 2 (> 0.18 MeV) were achieved. General Atomic Company's magazine P13Q occupied the upper two-thirds of the test space and the ORNL magazine OF-1 the lower one-third. The ORNL portion tested various HTGR recycle particles and fuel bonding matrices at accelerated flux levels under reference HTGR irradiation conditions of temperature, temperature gradient, and fast fluence exposure

Instrumental neutron activation analysis of proposed marine sediment reference material (IAEA-158)

International Nuclear Information System (INIS)

Siddique, N.; Waheed, S.

2009-01-01

IAEA-158, sediment prepared by the International Atomic Energy Agency -Marine Environmental Laboratory (IAEA-MEL), Monaco was received under the IAEA Analytical Quality Control Services (AQCS) Intercomparison Programme. Instrumental Neutron Activation Analysis (INAA) was used to determine AI, As, Br, Ce, Co, Cr, Cs, Eu, Fe, Hf, K, La, Lu, Mn, Na, Nd, Rb, Sb, Sc, Se, Sm, Ta, Tb, Th, V, Vb and Zn in this proposed reference material (RM). Four different irradiation protocols were adopted using a miniature neutron source reactor (MNSR) by varying the irradiation, cooling and counting times. IAEA-405 (Estuarine Sediment) and IAEA-SLI (Lake Sediment) were used as compatible matrix reference materials for quality assurance (QA) purposes. Good agreement between our data and lAEA certified values was obtained providing confidence in the reported data. (author)

Vaginal and bladder angiosarcoma after therapeutic irradiation

International Nuclear Information System (INIS)

Morgan, M.A.; Moutos, D.M.; Pippitt, C.H. Jr.; Suda, R.R.; Smith, J.J.; Thurnau, G.R.

1989-01-01

Angiosarcoma involving the female genitourinary tract is a rare soft tissue malignancy of vascular origin. We have described probably the first reported case of postirradiation angiosarcoma involving the vagina and bladder, and have reviewed the existing literature on the subject of angiosarcoma resulting from previous therapeutic irradiation for gynecologic malignancy.10 references

Selecting the optimal method to calculate daily global reference potential evaporation from CFSR reanalysis data for application in a hydrological model study

Directory of Open Access Journals (Sweden)

F. C. Sperna Weiland

2012-03-01

Full Text Available Potential evaporation (PET is one of the main inputs of hydrological models. Yet, there is limited consensus on which PET equation is most applicable in hydrological climate impact assessments. In this study six different methods to derive global scale reference PET daily time series from Climate Forecast System Reanalysis (CFSR data are compared: Penman-Monteith, Priestley-Taylor and original and re-calibrated versions of the Hargreaves and Blaney-Criddle method. The calculated PET time series are (1 evaluated against global monthly Penman-Monteith PET time series calculated from CRU data and (2 tested on their usability for modeling of global discharge cycles.

A major finding is that for part of the investigated basins the selection of a PET method may have only a minor influence on the resulting river flow. Within the hydrological model used in this study the bias related to the PET method tends to decrease while going from PET, AET and runoff to discharge calculations. However, the performance of individual PET methods appears to be spatially variable, which stresses the necessity to select the most accurate and spatially stable PET method. The lowest root mean squared differences and the least significant deviations (95% significance level between monthly CFSR derived PET time series and CRU derived PET were obtained for a cell-specific re-calibrated Blaney-Criddle equation. However, results show that this re-calibrated form is likely to be unstable under changing climate conditions and less reliable for the calculation of daily time series. Although often recommended, the Penman-Monteith equation applied to the CFSR data did not outperform the other methods in a evaluation against PET derived with the Penman-Monteith equation from CRU data. In arid regions (e.g. Sahara, central Australia, US deserts, the equation resulted in relatively low PET values and, consequently, led to relatively high discharge values for dry basins (e

A standardization of the physical tests for external irradiation measuring detectors

International Nuclear Information System (INIS)

1977-05-01

This report is the result of a standardization work, realized within the Radioprotection Services of the A.E.C., of the physical tests for dectors measuring external irradiations. Among the various tests mentionned, calibration and the establishment of the relative spectral response are treated in details. As far as calibration is concerned, the standardization refers to: the reference detector, the reference radiation source, the installation and calibration procedure. As for the relative spectral response the standardization refers to: the reference detector, the radiation sources to be used. High flux detectors and those for pulse electromagnetic radiations are also dealt with [fr

Neutron and gamma irradiation damage to organic materials.

Energy Technology Data Exchange (ETDEWEB)

White, Gregory Von, II; Bernstein, Robert

2012-04-01

This document discusses open literature reports which investigate the damage effects of neutron and gamma irradiation on polymers and/or epoxies - damage refers to reduced physical chemical, and electrical properties. Based on the literature, correlations are made for an SNL developed epoxy (Epon 828-1031/DDS) with an expected total fast-neutron fluence of {approx}10{sup 12} n/cm{sup 2} and a {gamma} dosage of {approx}500 Gy received over {approx}30 years at < 200 C. In short, there are no gamma and neutron irradiation concerns for Epon 828-1031/DDS. To enhance the fidelity of our hypotheses, in regards to radiation damage, we propose future work consisting of simultaneous thermal/irradiation (neutron and gamma) experiments that will help elucidate any damage concerns at these specified environmental conditions.

Combined effect of external and internal irradiation

International Nuclear Information System (INIS)

Kiradzhiev, G.

1987-01-01

Some of the general regularities of the combined effect of external irradiation and iodine 131 are discussed. Data are adduced showing that modification of the effects of these two radiation factors, when jointly applied, is also determined by the quantitative relations of the applied doses of external and internal irradiation, referred to a particular moment of the effects. It was shown that the effects of the radionuclides in these combined radiation injuries are basically realized by two mechanisms: 1. changes are found in the radionuclide kinetic parameters (nonspecific effects); 2. changes in their kinetic parameters are absent (specific effect). These two mechanisms underlie different approaches to therapy

Global solar radiation in Sierra Leone (West Africa)

International Nuclear Information System (INIS)

Massaquoi, J.G.M.

1987-09-01

A correlation equation of the Angstrom type has been developed to predict the monthly average daily global solar irradiation incident on a horizontal surface in Freetown, Sierra Leone. Measurements of the global insolation have been compared with those predicted using the equation. A good agreement (greater than 95% in most cases) was observed between the measured values and the predicted ones. (author). 15 refs, 2 tabs

The early effects in the brain after irradiation with carbon ions using mice

International Nuclear Information System (INIS)

Takai, Nobuhiko; Nakamura, Saori; Ohba, Yoshihito; Uzawa, Akiko; Furusawa, Yoshiya; Koike, Sachiko; Matsumoto, Yoshitaka; Hirayama, Ryoichi

2011-01-01

This study investigated both early and late effects in the brain after irradiation with carbon ions using mice. The irradiation dose was set at level known to produce vascular change followed by necrosis, which appeared the late period after irradiation with 30 Gy. The whole of brain was irradiated, excluding eyes and brain stem. The mice irradiated with single dose of 30 Gy showed deficit in short-term working memory assessed at 36 hr after irradiation, whereas mice receiving carbon irradiation showed no deficit in long-term reference memory. At 16 weeks after irradiation, the irradiated mice showed marked learning impairment compared with age-matched controls and the irradiated mice showed substantial impairment of working memory. Histopathological observation revealed no abnormal finding in the irradiated brain at 36 hr after irradiation, although irradiated mice showed marked neuronal degeneration at the hippocampus within CA1 to CA3 layers at 16 weeks after irradiation. In the irradiated group, neuronal cells in the hippocampal CA1-3 areas were reduced by 30-49%. These results suggest that although irradiation-induced hippocampal degeneration is associated with learning disability, cognitive deficits may also be detected on the early stage, not associated with hippocampal degeneration. (author)

Evaluation of dose conversion coefficients for external exposure using Taiwanese reference man and woman

International Nuclear Information System (INIS)

Chang, S.J.; Hung, S.Y.; Liu, Y.L.; Jiang, S.H.; Wu, J.

2015-01-01

Reference man has been widely used for external and internal dose evaluation of radiation protection. The parameters of the mathematical model of organs suggested by the International Commission of Radiological Protection (ICRP) are adopted from the average data of Caucasians. However, the organ masses of Asians are significantly different from the data of Caucasians, leading to potentially dosimetric errors. In this study, a total of 40 volunteers whose heights and weights corresponded to the statistical average of Taiwanese adults were recruited. Magnetic resonance imaging was performed, and T2-weighted images were acquired. The Taiwanese reference man and woman were constructed according to the measured organ masses. The dose conversion coefficients (DCFs) for anterior-posterior (AP), posterior-anterior (PA), right lateral (RLAT) and left lateral (LLAT) irradiation geometries were simulated. For the Taiwanese reference man, the average differences of the DCFs compared with the results of ICRP-74 were 7.6, 5.1 and 11.1 % for 0.1, 1 and 10 MeV photons irradiated in the AP direction. The maximum difference reached 51.7 % for the testes irradiated by 10 MeV photons. The size of the trunk, the volume and the geometric position of organs can cause a significant impact on the DCFs for external exposure of radiation. The constructed Taiwanese reference man and woman can be used in radiation protection to increase the accuracy of dose evaluation for the Taiwanese population. (authors)

Uncertainty in regional and zonal monthly mean downward surface irradiances from Edition 4.0 CERES Energy Balanced and Filled (EBAF) data product

Science.gov (United States)

Kato, S.; Rutan, D. A.; Rose, F. G.; Loeb, N. G.

2017-12-01

The surface of the Earth receives solar radiation (shortwave) and emission from the atmosphere (longwave). At a global and annual mean approximately 12% of solar radiation incident on the surface is reflected and the rest is absorbed by the surface. The surface emits radiation proportional to the forth power of the temperature. Although the uncertainty in global and annual mean surface irradiances is estimated in earlier studies (Zhang et al. 1995, 2004; L'Ecuyer et al. 2008; Stephens et al. 2012; Kato et al. 2012), only a few studies estimated the uncertainty in computed surface irradiances at smaller spatial and temporal scales (Zhang et al. 1995, 2004; Kato et al. 2012). We use surface observations at 46 buoys and 36 land sites and newly released the Edition 4.0 Clouds and the Earth's Radiant Energy System (CERES) Energy Balanced and Filled (EBAF)-surface data product to estimate the uncertainty in regional and zonal monthly mean downward shortwave and longwave surface irradiances. The root-mean-square difference of monthly mean computed and observed irradiances is used for the regional uncertainty. The uncertainty is separated into bias and spatially random components. The random component decreases when irradiances are averaged over a larger area, nearly inversely proportional to the number of surface observation sites. The presentation provides the uncertainty in the regional and zonal monthly mean downward surface irradiances over ocean and land. ReferencesKato, S. and N.G.Loeb, D. A.Rutan, F. G. Rose, S. Sun-Mack,W.F.Miller, and Y. Chen, 2012. Surv. Geophys., 33, 395-412, doi:10.1007/s10712-012-9179-x. L'Ecuyer, T. S., N. B. Wood, T. Haladay, G. L. Stephens, and P. W. Stackhouse Jr., 2008, J. Geophys. Res., 113, D00A15, doi:10.1029/2008JD009951. Stephens, G. L. and Coauthors, 2012, Nat. Geosci., 5, 691-696, doi:10.1038/ngeo1580. Zhang, Y., W. B. Rossow, A. A. Lacis, V. Oinas, and M. I. Mishchenko, 2004, J. Geophys. Res., 109, D19105, doi:10.1029/2003JD

Tensile tests and metallography of brazed AISI 316L specimens after irradiation

International Nuclear Information System (INIS)

Groot, P.; Franconi, E.

1994-01-01

Stainless steel type 316L tensile specimens were vacuum brazed with three kinds of alloys: BNi-5, BNi-6, and BNi-7. The specimens were irradiated up to 0.7 dpa at 353 K in the High Flux Reactor at JRC Petten, the Netherlands. Tensile tests were performed at a constant displacement rate of 10 -3 s -1 at room temperature in the ECN hot cell facility. BNi-5 brazed specimens showed ductile behaviour. Necking and fractures were localized in the plate material. BNi-6 and BNi-7 brazed specimens failed brittle in the brazed zone. This was preceded by uniform deformation of the plate material. Tensile test results of irradiated specimens showed higher stresses due to radiation hardening and a reduction of the elongation of the plate material compared to the reference. SEM examination of the irradiated BNi-6 and BNi-7 fracture surfaces showed nonmetallic phases. These phases were not found in the reference specimens. ((orig.))

Incorporation of detailed eye model into polygon-mesh versions of ICRP-110 reference phantoms.

Science.gov (United States)

Nguyen, Thang Tat; Yeom, Yeon Soo; Kim, Han Sung; Wang, Zhao Jun; Han, Min Cheol; Kim, Chan Hyeong; Lee, Jai Ki; Zankl, Maria; Petoussi-Henss, Nina; Bolch, Wesley E; Lee, Choonsik; Chung, Beom Sun

2015-11-21

The dose coefficients for the eye lens reported in ICRP 2010 Publication 116 were calculated using both a stylized model and the ICRP-110 reference phantoms, according to the type of radiation, energy, and irradiation geometry. To maintain consistency of lens dose assessment, in the present study we incorporated the ICRP-116 detailed eye model into the converted polygon-mesh (PM) version of the ICRP-110 reference phantoms. After the incorporation, the dose coefficients for the eye lens were calculated and compared with those of the ICRP-116 data. The results showed generally a good agreement between the newly calculated lens dose coefficients and the values of ICRP 2010 Publication 116. Significant differences were found for some irradiation cases due mainly to the use of different types of phantoms. Considering that the PM version of the ICRP-110 reference phantoms preserve the original topology of the ICRP-110 reference phantoms, it is believed that the PM version phantoms, along with the detailed eye model, provide more reliable and consistent dose coefficients for the eye lens.

Evaluation of instant cup noodle, irradiated for immuno-compromised patients

International Nuclear Information System (INIS)

Lee, Ji-Hye; Kim, Jae-Kyung; Park, Jae-Nam; Yoon, Young-Min; Sung, Nak-Yun; Kim, Jae-Hun; Song, Beom-Seok; Yook, Hong-Sun; Kim, Byeong-Keun; Lee, Ju-Woon

2012-01-01

In the present study, initial microbial load of instant cup noodle (ICN) was investigated and gamma irradiation applied to develop immuno-compromised patients food for their safe consumption. The initial microbial population of dried vegetable and meat, and noodle was below the detection limit (1 log CFU/g); however, that of seasoning powder was just above 4 log CFU/g. Moreover, rehydrated-ICN with water at 100 °C still show above 3 log CFU/g of microbial load, which indicates the need for an additional process to control microbial safety of the seasoning powder. The total aerobic bacteria in seasoning powder and rehydrated-ICN could be controlled with 17 kGy gamma irradiation. This result referred 17 kGy gamma irradiation could reach ‘practical sterility’ of ICN. The overall difference in sensory properties between the non-irradiated and irradiated ICN was insignificant. Thus, gamma irradiation could improve the microbial quality of ICN, and reduce the risk of infection posed by the seasoning powder, without any adverse effects on their sensory quality. These results suggest that gamma-irradiated ICN can be used as a snack food for immuno-compromised patients.

Evaluation of instant cup noodle, irradiated for immuno-compromised patients

Science.gov (United States)

Lee, Ji-Hye; Kim, Jae-Kyung; Park, Jae-Nam; Yoon, Young-Min; Sung, Nak-Yun; Kim, Jae-Hun; Song, Beom-Seok; Yook, Hong-Sun; Kim, Byeong-Keun; Lee, Ju-Woon

2012-08-01

In the present study, initial microbial load of instant cup noodle (ICN) was investigated and gamma irradiation applied to develop immuno-compromised patients food for their safe consumption. The initial microbial population of dried vegetable and meat, and noodle was below the detection limit (1 log CFU/g); however, that of seasoning powder was just above 4 log CFU/g. Moreover, rehydrated-ICN with water at 100 °C still show above 3 log CFU/g of microbial load, which indicates the need for an additional process to control microbial safety of the seasoning powder. The total aerobic bacteria in seasoning powder and rehydrated-ICN could be controlled with 17 kGy gamma irradiation. This result referred 17 kGy gamma irradiation could reach 'practical sterility' of ICN. The overall difference in sensory properties between the non-irradiated and irradiated ICN was insignificant. Thus, gamma irradiation could improve the microbial quality of ICN, and reduce the risk of infection posed by the seasoning powder, without any adverse effects on their sensory quality. These results suggest that gamma-irradiated ICN can be used as a snack food for immuno-compromised patients.

Performance of Broiler Chicks Fed Irradiated Sorghum Grains

International Nuclear Information System (INIS)

Farag, M.D.D.; Farag, M.F. S. El-D.; Afify, A.S.

2003-01-01

Substitution of yellow corn with raw sorghum grains in chick diets resulted in decreases in live body weight, accumulative feed consumption and efficiency of feed utilization as compared with reference diet. Relative to raw sorghum diet, inclusion of sorghum grains irradiated at 60 and 100 kGy and/or supplemented with PEG in chick diets resulted in increases in accumulative feed consumption an efficiency feed utilization. The study suggested that irradiation treatment up to 100 kGy up grade broiler chicks performance and the combinations between radiation and PEG treatments sustain the effect of each other

Decadal changes in shortwave irradiance at the surface in the period from 1960 to 2000 estimated from Global Energy Balance Archive Data

Science.gov (United States)

Gilgen, H.; Roesch, A.; Wild, M.; Ohmura, A.

2009-05-01

Decadal changes in shortwave irradiance at the Earth's surface are estimated for the period from approximately 1960 through to 2000 from pyranometer records stored in the Global Energy Balance Archive. For this observational period, estimates could be calculated for a total of 140 cells of the International Satellite Cloud Climatology Project grid (an equal area 2.5° × 2.5° grid at the equator) using regression models allowing for station effects. In large regions worldwide, shortwave irradiance decreases in the first half of the observational period, recovers from the decrease in the 1980s, and thereafter increases, in line with previous reports. Years of trend reversals are determined for the grid cells which are best described with a second-order polynomial model. This reversal of the trend is observed in the majority of the grid cells in the interior of Europe and in Japan. In China, shortwave irradiance recovers during the 1990s in the majority of the grid cells in the southeast and northeast from the decrease observed in the period from 1960 through to 1990. A reversal of the trend in the 1980s or early 1990s is also observed for two grid cells in North America, and for the grid cells containing the Kuala Lumpur (Malaysia), Singapore, Casablanca (Morocco), Valparaiso (Chile) sites, and, noticeably, the remote South Pole and American Samoa sites. Negative trends persist, i.e., shortwave radiation decreases, for the observational period 1960 through to 2000 at the European coasts, in central and northwest China, and for three grid cells in India and two in Africa.

Solar ultraviolet irradiance variations: a review

International Nuclear Information System (INIS)

Lean, J.

1987-01-01

Despite the geophysical importance of solar ultraviolet radiation, specific aspects of its temporal variations have not yet been adequately determined experimentally, nor are the mechanisms for the variability completely understood. Satellite observations have verified the reality of solar ultraviolet irradiance variations over time scales of days and months, and model calculations have confirmed the association of these short-term variations with the evolution and rotation of regions of enhanced magnetic activity on the solar disc. However, neither rocket nor satellite measurements have yet been made with sufficient accuracy and regularity to establish unequivocally the nature of the variability over the longer time of the 11-year solar cycle. The comparative importance for the long-term variations of local regions of enhanced magnetic activity and global scale activity perturbations is still being investigated. Solar ultraviolet irradiance variations over both short and long time scales are reviewed, with emphasis on their connection to solar magnetic activity. Correlations with ground-based measures of solar variability are examined because of the importance of the ground-based observations as historical proxies of ultraviolet irradiance variations. Current problems in understanding solar ultraviolet irradiance variations are discussed, and the measurements planned for solar cycle 22, which may resolve these problems, are briefly described. copyright American Geophysical Union 1987

Certification of biological reference materials by instrumental neutron activation analysis

International Nuclear Information System (INIS)

Lanjewar, Mamata R.; Lanjewar, R.B.

2014-01-01

A multielemental instrumental neutron activation analysis (INAA) method by short and long irradiation has been employed for the determination of 21 minor and trace elements in two standard Reference Materials P-RBF and P-WBF from Institute of Radioecology and Applied Nuclear Techniques ,Czechoslovakia. Also some biological standards such as Bowen's kale, cabbage leaves (Poland) including wheat and rice flour samples of local origin were analysed. It is suggested that INAA is an ideal method for the certification of Reference Materials of Biological Matrices. (author)

Is there a lean future for global startups?

DEFF Research Database (Denmark)

Tanev, Stoyan

2017-01-01

This article integrates insights from the latest research on the lean startup entrepreneurial method, born-global firms, and global startups. It contributes to the clarification of terminology referring to the global aspects of startups, summarizes insights from previous literature focusing on gl......-based global startup research and practice. The analysis should benefit both researchers and practitioners in technology entrepreneurship, international entrepreneurship, and global innovation management.......This article integrates insights from the latest research on the lean startup entrepreneurial method, born-global firms, and global startups. It contributes to the clarification of terminology referring to the global aspects of startups, summarizes insights from previous literature focusing...... on global startups, and further substantiates the articulation of the need for considering the lean global startup as a new type of firm. The main message is that the lessons learned from the emergence of lean startup entrepreneurship offer a basis for promoting a similar lean phase in technology...

Dosimetry characterization of the Tunisian Cobalt-60 gamma irradiation pilot plant for the irradiation of the mediterranean fruit fly

International Nuclear Information System (INIS)

Bettaieb, Nasreddine; Farah, Kaled; Kadri, Omrane; Jerbi, Taieb; Gharbi, Foued; Manai, Kais

2005-01-01

Cobalt-60 gamma irradiation pilot plant has been put into operation in 1999 at the National Center for nuclear scinces and technologies, Sidi-Thabet, Tunisia. An initial characterization of this pilot was performed to determine the overall performance of the irradiator in delivering absorbed dose to a product prior to routine processing, in particular sterilisation of medical devices and food irradiation. A new irradiation holder was recently installed; it was designed especially for the irradiation of pupae of the Meditterranean fruit fly. It consists of four turn plates which makes it possible to rotate the canisters holding the pupae within the radiation field. The axis of ratation is vertical and parallel to the source pencils. Prior to routine irradiation using the new irradiation holder, validation procedures are necessary to establish conditions of the irradiation within the specification. In the course of these procedures, detailed dose mapping on a vertical plane in the middel of the canister of insect pupae with bulk density of 0.446 g /cm3 was carried out for two irradiation configurations : fixed plates and turned plates. GafChromic dosimeter calibrated against Alanine / ESR dosimetry system was used for the dose measurements. The maximum and minimum dose locations were determined and the dose uniformity ratio calculated and discussed. Detailed analyses of the isodose curves and histogram of the frequency distribution of absorbed dose were also given. Transit dose and dose rate in the reference position inside the canister were measured using Fricke dosimeters. The results of measurements of absorbed dose and dose distribution in insect pupae do not show any significant difference in the dose uniformity ratio (U=Dmax / Dmin) between the two irradiation configurations. At the same time we observed with turned plates configuration an improvement of the homogeneity of the absorbed dose distribution in the insect pupae showed by the increasing of the pipae

Investigation of fruit irradiation: bibliographical review

International Nuclear Information System (INIS)

Luna C, P.C.

1991-01-01

It was carried out a bibliographical review that embraces the years 1984-1987, on the relating works to the irradiation of some fruits like the apple, date, peach, plum, cherry, papaya, grape, banana, pear and strawberry. The purpose is to have a reference on the doses and the conditions used by several investigators for some fruits, as for its disinfestation and extension of shelf life. (Author)

Total body irradiation in conditioning patients for bone marrow transplantation. Irradiation technique and preliminary results at the West German Tumour Centre, Universitaetsklinikum Essen

International Nuclear Information System (INIS)

Schmitt, G.; Schaefer, U.W.; Nowrousian, M.R.; Oehl, S.

1979-01-01

Preliminary results of bone marrow transplantation of 8 patients are presented with particular reference to the irradiation technique. 5 patients died 0.5 to 8 months after transplantation. 3 patients are alive and in good condition 2 to 15 months after transplantation

The GCOS Reference Upper-Air Network (GRUAN)

Science.gov (United States)

Vömel, H.; Berger, F. H.; Immler, F. J.; Seidel, D.; Thorne, P.

2009-04-01

While the global upper-air observing network has provided useful observations for operational weather forecasting for decades, its measurements lack the accuracy and long-term continuity needed for understanding climate change. Consequently, the scientific community faces uncertainty on such key issues as the trends of temperature in the upper troposphere and stratosphere or the variability and trends of stratospheric water vapour. To address these shortcomings, and to ensure that future climate records will be more useful than the records to date, the Global Climate Observing System (GCOS) program initiated the GCOS Reference Upper Air Network (GRUAN). GRUAN will be a network of about 30-40 observatories with a representative sampling of geographic regions and surface types. These stations will provide upper-air reference observations of the essential climate variables, i.e. temperature, geopotential, humidity, wind, radiation and cloud properties using specialized radiosondes and complementary remote sensing profiling instrumentation. Long-term stability, quality assurance / quality control, and a detailed assessment of measurement uncertainties will be the key aspects of GRUAN observations. The network will not be globally complete but will serve to constrain and adjust data from more spatially comprehensive global observing systems including satellites and the current radiosonde networks. This paper outlines the scientific rationale for GRUAN, its role in the Global Earth Observation System of Systems, network requirements and likely instrumentation, management structure, current status and future plans.

Performance of FFTF reference fuel and control assemblies

International Nuclear Information System (INIS)

Leggett, R.D.; Weber, E.T.

1984-11-01

This paper describes the performance of the reference fuel and control assemblies used in FFTF through the first four cycles of irradiation (446 equivalent full power days, EFPD). These assemblies performed flawlessly through the rigors of the Startup Testing Program, STP, (beginning in late 1979) with its cyclic operation and continued to do so throughout Cycles 1, 2, 3 and 4, the latter ending in April 1984

Preservation of food products by irradiation

International Nuclear Information System (INIS)

McGivney, W.T.

1988-01-01

The use of irradiation to preserve food has the potential to significantly enhance our capacity to maximize the quality and quantity of the food we consume. In a world in which distribution of food occurs across continents and in which malnourished populations are in dire need of basic food products, any safe, effective, and efficient means of preserving food is more than welcome. Irradiation, as a method for food preservation, has been studied for more than 30 years. This discussion focuses on this most recent method for the preservation of food with particular emphasis on its effects on the safety, nutritive, and aesthetic values of the food preserved by irradiation. The use of ionizing radiation as a method to preserve foods is one that has been demonstrated to be effective for a variety of food classes. Irradiation offers a means to decontaminate, disinfest, and retard the spoilage of the food supply. At the same time, it appears that the wholesomeness of these food products is maintained. Nutritive value can be sustained by use of effective doses of radiation. Concerns over the safety of irradiated food are rooted in questions regarding the potential induction of radioactivity, harmful radiolytic products, and pathogenic radiation-resistant or mutant strains of microorganisms. Research findings have allayed concerns over safety. However, more research is necessary to conclusively resolve these safety issues. Food irradiation is a promising technology that has and will contribute to our ability to feed the people of this world. This technology is but one of many available ways to preserve our greatest natural resource, the food supply. Enhancement of the ability to preserve food by irradiation will facilitate the distribution of food from fertile developed regions to the malnourished peoples of underdeveloped countries. 21 references

Historical change in fish species distribution: shifting reference conditions and global warming effects.

Science.gov (United States)

Pont, Didier; Logez, M; Carrel, G; Rogers, C; Haidvogl, G

Species distributions models (SDM) that rely on estimated relationships between present environmental conditions and species presence-absence are widely used to forecast changes of species distributions caused by global warming but far less to reconstruct historical assemblages. By compiling historical fish data from the turn to the middle of the twentieth century in a similar way for several European catchments (Rhône, Danube), and using already published SDMs based on current observations, we: (1) tested the predictive accuracy of such models for past climatic conditions, (2) compared observed and expected cumulated historical species occurrences at sub-catchment level, and (3) compared the annual variability in the predictions within one sub-catchment (Salzach) under a future climate scenario to the long-term variability of occurrences reconstructed during an extended historical period (1800-2000). We finally discuss the potential of these SDMs to define a "reference condition", the possibility of a shift in baseline condition in relation with anthropogenic pressures, and past and future climate variability. The results of this study clearly highlight the potential of SDM to reconstruct the past composition of European fish assemblages and to analyze the historical ecological status of European rivers. Assessing the uncertainty associated with species distribution projections is of primary importance before evaluating and comparing the past and future distribution of species within a given catchment.

Enterprise Reference Library

Science.gov (United States)

Bickham, Grandin; Saile, Lynn; Havelka, Jacque; Fitts, Mary

2011-01-01

Introduction: Johnson Space Center (JSC) offers two extensive libraries that contain journals, research literature and electronic resources. Searching capabilities are available to those individuals residing onsite or through a librarian s search. Many individuals have rich collections of references, but no mechanisms to share reference libraries across researchers, projects, or directorates exist. Likewise, information regarding which references are provided to which individuals is not available, resulting in duplicate requests, redundant labor costs and associated copying fees. In addition, this tends to limit collaboration between colleagues and promotes the establishment of individual, unshared silos of information The Integrated Medical Model (IMM) team has utilized a centralized reference management tool during the development, test, and operational phases of this project. The Enterprise Reference Library project expands the capabilities developed for IMM to address the above issues and enhance collaboration across JSC. Method: After significant market analysis for a multi-user reference management tool, no available commercial tool was found to meet this need, so a software program was built around a commercial tool, Reference Manager 12 by The Thomson Corporation. A use case approach guided the requirements development phase. The premise of the design is that individuals use their own reference management software and export to SharePoint when their library is incorporated into the Enterprise Reference Library. This results in a searchable user-specific library application. An accompanying share folder will warehouse the electronic full-text articles, which allows the global user community to access full -text articles. Discussion: An enterprise reference library solution can provide a multidisciplinary collection of full text articles. This approach improves efficiency in obtaining and storing reference material while greatly reducing labor, purchasing and

Spatially Resolved Images and Solar Irradiance Variability R ...

Indian Academy of Sciences (India)

Abstract. The Sun is the primary source of energy that governs both the terrestrial climate and near-earth space environment. Variations in UV irradiances seen at earth are the sum of global (solar dynamo) to regional. (active region, plage, network, bright points and background) solar mag- netic activities that can be ...

Comparison of Modelled and Measured Tilted Solar Irradiance for Photovoltaic Applications

Directory of Open Access Journals (Sweden)

Riyad Mubarak

2017-10-01

Full Text Available This work assesses the performance of five transposition models that estimate the global and diffuse solar irradiance on tilted planes based on the global horizontal irradiance. The modelled tilted irradiance values are compared to measured one-minute values from pyranometers and silicon sensors tilted at different angles at Hannover (Germany and NREL (Golden, CO, USA. It can be recognized that the deviations of the model of Liu and Jordan, Klucher and Perez from the measurements increases as the tilt angle increases and as the sensors are oriented away from the south direction, where they receive lower direct radiation than south-oriented surfaces. Accordingly, the vertical E, W and N planes show the highest deviation. Best results are found by the models from Hay and Davies and Reindl, when horizontal pyranometer measurements and a constant albedo value of 0.2 are used. The relative root mean squared difference (rRMSD of the anisotropic models does not exceed 11% for south orientation and low inclination angles (β = 10–60°, but reaches up to 28.9% at vertical planes. For sunny locations such as Golden, the Perez model provides the best estimates of global tilted irradiance for south-facing surfaces. The relative mean absolute difference (rMAD of the Perez model at NREL ranges from 4.2% for 40° tilt to 8.7% for 90° tilt angle, when horizontal pyranometer measurements and a measured albedo value are used; the use of measured albedo values instead of a constant value of 0.2 leads to a reduction of the deviation to 3.9% and 6.0%, respectively. The use of higher albedo values leads to a significant increase of rMAD. We also investigated the uncertainty resulting from using horizontal pyranometer measurements, in combination with constant albedo values, to estimate the incident irradiance on tilted photovoltaic (PV modules. We found that these uncertainties are small or negligible.

A normalization of the physical tests for external irradiation measuring detectors

International Nuclear Information System (INIS)

1977-05-01

This report is the result of a normalization work, realized within the Radioprotection Services of the C.E.A., of the physical tests for detectors measuring external irradiation. Among the various tests mentionned are treated more in details, calibration and the establishment of the relative spectral response. As far as calibration is concerned, the normalization refers to: the reference detector, the reference radiation source, the installation and calibration procedure. As for the relative spectral response the normalization refers to: the reference detector, the radiation sources to be used. Finally, a chapter is consecrated to the high flux detectors and to those for pulsed electromagnetic radiations [fr

Solute segregation and void formation in ion-irradiated vanadium-base alloys

International Nuclear Information System (INIS)

Loomis, B.A.; Smith, D.L.

1985-01-01

The radiation-induced segregation of solute atoms in the V-15Cr-5Ti alloys was determined after either single- dual-, or helium implantation followed by single-ion irradiation at 725 0 C to radiation damage levels ranging from 103 to 169 dpa. Also, the effect of irradiation temperature (600-750 0 C) on the microstructure in the V-15Cr-5Ti alloy was determined after single-ion irradiation to 200 and 300 dpa. The solute segregation results for the single- and dual-ion irradiated alloy showed that the simultaneous production of irradiation damage and deposition of helium resulted in enhanced depletion of Cr solute and enrichment of Ti, C and S solute in the near-surface layers of irradiated specimens. The observations of the irradiation-damaged microstructures in V-15Cr-5Ti specimens showed an absence of voids for irradiations of the alloy at 600-750 0 C to 200 dpa and at 725 0 C to 300 dpa. The principle effect on the microstructure of these irradiations was to induce the formation of a high density of disc-like precipitates in the vicinity of grain boundaries and intrinsic precipitates and on the dislocation structure. 8 references, 4 figures

Influence of specimen size/type on the fracture toughness of five irradiated RPV materials

Energy Technology Data Exchange (ETDEWEB)

Sokolov, Mikhail A [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lucon, Enrico [National Inst. of Standards and Technology (NIST), Boulder, CO (United States)

2015-01-01

The Heavy-Section Steel Irradiation (HSSI) Program had previously irradiated five reactor pressure vessel (RPV) steels/welds at fast neutron fluxes of about 4 to 8 x 10¹¹ n/cm²/s (>1 MeV) to fluences from 0.5 to 3.4 10¹⁹ n/cm² and at 288 °C. The unirradiated fracture toughness tests were performed by Oak Ridge National Laboratory with 12.7-mm and 25.4-mm thick (0.5T and 1T) compact specimens, while the HSSI Program provided tensile and 5 x 10-mm three-point bend specimens to SCK-CEN for irradiation in the in-pile section of the Belgian Reactor BR2 at fluxes > 10¹³ n/cm²/s and subsequent testing by SCK-CEN. The BR2 irradiations were conducted at about 2 and 4 x 10¹³ n/cm²/s with irradiation temperature between 295 °C and 300 °C (water temperature), and to fluences between 6 and 10 x 10¹⁹n/cm². The irradiation-induced shifts of the Master Curve reference temperatures, ΔT₀, for most of the materials deviated from the embrittlement correlations much more than expected, motivating the testing of 5 x 10-mm three-point bend specimens of all five materials in the unirradiated condition to eliminate specimen size and geometry as a variable. Tests of the unirradiated small bend specimens resulted in Master Curve reference temperatures, T₀, 25 °C to 53 °C lower than those from the larger compact specimens, meaning that the irradiation-induced reference temperature shifts, ΔT₀, were larger than the initial measurements, resulting in much improved agreement between the measured and predicted fracture toughness shifts.

The establishment of good irradiation practice for insect disinfestation of cereal grain products

International Nuclear Information System (INIS)

Lin Yin; Liu Hongyue; Li Xiangling; Shi Peixin

2001-01-01

According to the reference data and test results, the parameters and technicality of good irradiation practice (GIP) were established as follows: (1) the moisture level of grain products should be < 12% for pre-irradiation treatment of grains, and pupae and adult stages insects should not exist in the products; (2) grain products should be irradiated immediately after packing; (3) the minimum effective dose for insect disinfestation is 0.3 kGy and the maximum tolerant doses for different cereal grains products are 0.5 ∼ 0.8 kGy. (authors)

Is phenytoin contraindicated in patients receiving cranial irradiation?

Energy Technology Data Exchange (ETDEWEB)

Borg, M.F. [Royal Adelaide Hospital, SA (Australia); Probert, J.C. [Auckland Hospital, Auckland (New Zealand). Dept. of Radiation Oncology; Zwi, L.J. [Auckland Univ. (New Zealand). Dept. of Medicine and Surgery

1995-02-01

Three recent publications have reported the development of erythema multiforme and Stevens-Johnson syndrome in patients receiving cranial irradiation and sodium phenytoin. Some authors have recommended that patients receiving whole brain radiation therapy and who have had seizures should not be prescribed phenytoin but an alternative anticonvulsant. This article reviews the current literature pertaining to the development of this potentially lethal complication in patients receiving whole brain radiation and phenytoin, with reference to the single recorded case of Stevens-Johnson syndrome in a patient receiving cranial irradiation and phenytoin in Auckland, New Zealand. While the clinical picture in the 16 patients reported in the literature and the current case report differed from the classical form of erythema multiforme, a similar pattern of presentation and outcome appeared in all patients reviewed, suggesting that the combination of phenytoin, cranial irradiation and the gradual reduction of concomitant steroids seem to lead to the development of erythema multiforme and/or Stevens-Johnson syndrome. The data presented, although sparse, suggest that phenytoin should not be prescribed in patients receiving cranial irradiation. 21 refs., 2 tabs., 3 figs.

Is phenytoin contraindicated in patients receiving cranial irradiation?

International Nuclear Information System (INIS)

Borg, M.F.; Probert, J.C.; Zwi, L.J.

1995-01-01

Three recent publications have reported the development of erythema multiforme and Stevens-Johnson syndrome in patients receiving cranial irradiation and sodium phenytoin. Some authors have recommended that patients receiving whole brain radiation therapy and who have had seizures should not be prescribed phenytoin but an alternative anticonvulsant. This article reviews the current literature pertaining to the development of this potentially lethal complication in patients receiving whole brain radiation and phenytoin, with reference to the single recorded case of Stevens-Johnson syndrome in a patient receiving cranial irradiation and phenytoin in Auckland, New Zealand. While the clinical picture in the 16 patients reported in the literature and the current case report differed from the classical form of erythema multiforme, a similar pattern of presentation and outcome appeared in all patients reviewed, suggesting that the combination of phenytoin, cranial irradiation and the gradual reduction of concomitant steroids seem to lead to the development of erythema multiforme and/or Stevens-Johnson syndrome. The data presented, although sparse, suggest that phenytoin should not be prescribed in patients receiving cranial irradiation. 21 refs., 2 tabs., 3 figs

Impact and prevention on global warming

International Nuclear Information System (INIS)

Park, Heon Ryeol

2003-11-01

This book deals with impact and prevention on global warming with eight chapters, which introduce the change after the earth was born and natural environment, how is global atmospheric environment under the control of radiant energy? What does global warming look with the earth history like? What's the status of global warming so far? How does climate change happen? What is the impact by global warming and climate change and for preservation of global environment of 21 century with consumption of energy, measure and prospect on global warming. It has reference, index and three appendixes.

Reference evapotranspiration forecasting based on local meteorological and global climate information screened by partial mutual information

Science.gov (United States)

Fang, Wei; Huang, Shengzhi; Huang, Qiang; Huang, Guohe; Meng, Erhao; Luan, Jinkai

2018-06-01

In this study, reference evapotranspiration (ET0) forecasting models are developed for the least economically developed regions subject to meteorological data scarcity. Firstly, the partial mutual information (PMI) capable of capturing the linear and nonlinear dependence is investigated regarding its utility to identify relevant predictors and exclude those that are redundant through the comparison with partial linear correlation. An efficient input selection technique is crucial for decreasing model data requirements. Then, the interconnection between global climate indices and regional ET0 is identified. Relevant climatic indices are introduced as additional predictors to comprise information regarding ET0, which ought to be provided by meteorological data unavailable. The case study in the Jing River and Beiluo River basins, China, reveals that PMI outperforms the partial linear correlation in excluding the redundant information, favouring the yield of smaller predictor sets. The teleconnection analysis identifies the correlation between Nino 1 + 2 and regional ET0, indicating influences of ENSO events on the evapotranspiration process in the study area. Furthermore, introducing Nino 1 + 2 as predictors helps to yield more accurate ET0 forecasts. A model performance comparison also shows that non-linear stochastic models (SVR or RF with input selection through PMI) do not always outperform linear models (MLR with inputs screen by linear correlation). However, the former can offer quite comparable performance depending on smaller predictor sets. Therefore, efforts such as screening model inputs through PMI and incorporating global climatic indices interconnected with ET0 can benefit the development of ET0 forecasting models suitable for data-scarce regions.

Investigation of wholesomeness of feeding low-irradiated diet to mice. Part of a coordinated programme on the wholesomeness of the process of food irradiation

International Nuclear Information System (INIS)

Baev, I.A.

1980-06-01

Studies are carried out on the wholesomeness of irradiated food with special reference to gamma irradiation (0.75 kGy) maize, (1 kGy) walnuts and (2 kGy) prune-plums. These include physico-chemical changes in the food constituents as well as toxicity and mutagenic effects on animals after long-term feeding test. The results indicate an increase of the carbonyl compounds after irradiation in all studied foodstuffs, but there is not significant difference in the number of the new-formed carbonyl compounds when compared with controls. Biomedical investigation are carried out to define any toxicity, consideration being given to both direct effects in adult or growing organisms and to effect in their progeny. Effects of gamma irradiated diet, including maize, walnuts and prune-plums, exposed to the above mentioned doses fed to three consecutive generations of mice have been studied. A 35% addition of irradiated feed to standard diet is shown to produce no deleterious effects as judged by mean litter size, body weight at weaning, adult body weight and organ weight, haematological measures and some enzyme activities

Discussion on the re-irradiated fuel assembly with damaged guide vanes

International Nuclear Information System (INIS)

Li Ligang

2013-01-01

In January 2011, during the second plant of CNNC Nuclear Power Operations Management Co., Ltd.(hereinafter referred to as the second plant) refueling outage, the visual inspection found the guide vanes of fuel assembly A had felling off. After the National Nuclear Safety Administration (NNSA) estimated and approved, the fuel assembly A was reloaded in the specified location of reactor core. During the refueling outage in March 2012, the fuel assembly A was removed again from the reactor core. Visual inspection confirmed that the fuel assembly A was complete and without abnormal changes. The practice provides reference for re-irradiated of fuel assembly with the same type of damaged guide vanes, and provides case support for standard development for the same type of re-irradiated fuel assembly with damaged guide vanes. (author)

Production of aflatoxins during storage of gamma-irradiated wheat

International Nuclear Information System (INIS)

Behere, A.G.; Sharma, A.; Padwaldesai, S.R.; Nadkarni, G.B.

1978-01-01

A correlation between relative humidity (RH) during storage and moisture content was obtained in wheat subjected to gamma irradiation at 20 krad. The samples were assessed for storage up to 6 months with and without artificial loading of grains with conidia of Aspergillus flavus. The mycotoxin production seemed to be determined by a critical level of moisture in the grain (13%) at RH over 80% at 28 0 +- 2 0 C. The total aflatoxin produced in the irradiated grains was observed to be lower than in the unirradiated controls. The amount of toxin contained in grains, artificially infected with A. flavus before or after irradiation, did not show appreciable differences. The results, while defining the storage conditions with reference to humidity, did not indicate any alterations in wheat relating to aflatoxin producing potential

Effect of low-dose gamma irradiation on storage properties in light salted Pseudosciaena crocea

International Nuclear Information System (INIS)

Zhang Xiaoyan; Yang Xianshi; Li Xueying; Guo Quanyou

2012-01-01

To explore the preservation effect of γ irradiation on light salted Pseudosciaena crocea, the influence of 1 kGy low-dose γ irradiation on sensory quality, microbiological and chemical quality including TVC, TVB-N and TBARS contents of light salted P. crocea stored at 25 ℃ was discussed. The results showed that the number of total viable counts significantly decreased after irradiation, during the whole storage, the bacteria numbers of light salted P. crocea treated with irradiation were still less than the control. The concentrations of TVB-N was significantly reduced after irradiation, whereas lipid oxidation was less accelerated. The shelf life could be remarkably prolonged after low-dose γ irradiation. While the shelf life of control group were 9 and 11 days, the shelf life of irradiated light salted P. crocea were extended to 16 and 20 days, respectively. The results can provide technical references for commercial application of seafood irradiation. (authors)

Investigation on shortening fabrication process of instrumented irradiation capsule of JMTR

International Nuclear Information System (INIS)

Nagata, Hiroshi; Inoue, Shuichi; Yamaura, Takayuki; Tsuchiya, Kunihiko; Nagao, Yoshiharu

2013-06-01

Refurbishment of The Japan Materials Testing Reactor (JMTR) was completed in FY2010. For damage caused by the 2011 off the Pacific coast of Tohoku Earthquake, the repair of facilities was completed in October 2012. Currently, the JMTR is in preparation for restart. Irradiation tests for LWRs safety research, science and technologies and production of RI for medical diagnosis medicine, etc. are expected after the JMTR restart. On the other hand, aiming at the attractive irradiation testing reactor, the usability improvement has been discussed. As a part of the usability improvement, shortening of turnaround time to get irradiation results from an application for irradiation use was discussed focusing on the fabrication process of irradiation capsules, where the fabrication process was analyzed and reviewed by referring a trial fabrication of the mockup capsule. As a result, it was found that the turnaround time can be shortened 2 months from fabrication period of 6 months with communize of irradiation capsule parts, application of ready-made instrumentation including the sheath heater, reconsideration of inspection process, etc. (author)

Effect of the damage by radiation on the reference temperature T0 of ferritic steel

International Nuclear Information System (INIS)

Villanueva O, A.

2004-01-01

Presently work studies the effect that produces the irradiation in ferritic steels, on the reference temperature T 0 (intrinsic characteristic of the fracture tenacity in the area of ductile-fragile transition), applying the approach of the Master curve that is based on the norm Astm E-1921. For it it was elaborated a methodology and procedure for test tubes type Charpy according to the standard before mentioned. Due to the ferritic steels are used mainly in pressure vessels to the reactor (RPV) of nuclear power plants; in the samples it was simulated the effect of the damage for irradiation through a thermal treatment that induced the precipitation of the carbides and sulfurs in the limits of grain (one of the modifications suffered in the irradiated materials); it was made a comparison later with material samples in initial state (without thermal treatment), used as witness sample, by means of assays of fracture mechanics, specifically flexion in three points; this way with it to observe the effect of the damage for irradiation in the reference temperature (T 0 ). This temperature (T 0 ) it is a very important parameter in the mechanical property of the material called fracture tenacity; which at the moment gives the rule for the verification of structural integrity of the RPV. As a result of this it was observed an increase in the reference temperature in the material in fragilezed state with respect to the initial state of 31.75 C. They were carried out metallographic analysis and fractographs of the assayed surface finding carbide inclusions and sulfurs that in theory of the Master Curve they are initiators of cracks and of a possible catastrophic flaw of the material. At the moment the Division of Scientific Investigation of the ININ is carrying out activities in the Nucleo electric Central of Laguna Verde (CNLV) related with the program of surveillance of the materials of the vessel of the unit 2, as well as projects of structural integrity financed by the

Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation

CERN Document Server

American Society for Testing and Materials. Philadelphia

1996-01-01

1.1 This practice covers the performance of mechanical tests on materials being irradiated with charged particles. These tests are designed to simulate or provide understanding of, or both, the mechanical behavior of materials during exposure to neutron irradiation. Practices are described that govern the test material, the particle beam, the experimental technique, and the damage calculations. Reference should be made to other ASTM standards, especially Practice E 521. Procedures are described that are applicable to creep and creep rupture tests made in tension and torsion test modes. 1.2 The word simulation is used here in a broad sense to imply an approximation of the relevant neutron irradiation environment. The degree of conformity can range from poor to nearly exact. The intent is to produce a correspondence between one or more aspects of the neutron and charged particle irradiations such that fundamental relationships are established between irradiation or material parameters and the material respons...

Acute effect of gamma-irradiation on blood vessels of the eye

International Nuclear Information System (INIS)

Matsushima, Hideno

1977-01-01

Radiation injuries to the eye were studied by examining the alteration of fine vasculature of irradiated rabbit eyes, by referring to the usual clinical findings, fundus photography, microangiography, and histological sections. These experiments were performed by using white rabbits whose eyes were locally irradiated with a single dose of 500, 1000, 2000, 3000, and 5000 R of 60 Co-γ-ray. The eyes were observed periodically for a period up to 10 weeks after irradiation, and the following results were obtained: 1) Radiation damage to the blood vessels was maximum around 6 weeks after irradiation for doses less than 2000 R, and the damage appeared to be reversible. 2) When given more than 3000 R irradiation, alteration of the blood vessels continued increasing for 10 weeks with no evidence of recovery. Experimental evidence from these studies supports the hypothesis that the degree of radiation injury of the eye depends highly on the damage to blood vessels serving each structure of the eye. (auth.)

2001 - 2010 Design reference year for Denmark. [DRY]; 2001 - 2010 Design reference year for Denmark

Energy Technology Data Exchange (ETDEWEB)

Riddersholm Wang, P.; Scharling, M.; Pagh Nielsen, K.

2012-07-01

This report presents the Danish Design Reference Year based on data from 2001 - 2010. It contains data set for technical dimensioning for the parameters global radiation, relative humidity, temperature and wind velocity, and diffuse solar radiation and illuminance. All data may be downloaded from www.dmi.dk/dmi/tr12-17.zip. (LN)

Extracorporeal irradiation of calves blood. Effects on: the lymphocytes, the blood-platelet function, seric proteins, and fibrinogen; Irradiation extracorporelle du sang de veau effets sur: les lymphocytes, la fonction plaquettaire, les proteines seriques et le fibrinogene

Energy Technology Data Exchange (ETDEWEB)

Hollard, D; Suscillon, M; Benabid, Y; Concord, E; Ivanoff, M; Laurent, M; Rambaud, F [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1969-07-01

The present paper reports the results obtained after extracorporeal irradiation of circulating blood of calves. Animals are divided in 3 groups as follows: - control animals: blood circulation without irradiation; - calves which received 40000 rads during 24 hours of continuous irradiation; - calves which received the same dose, during a period of 5 days (5 hours every day). The more interesting results are: - the early lymphopenia which persists for 7 or 8 weeks and may be in relationship with the change of immunoglobulins; - a constant hyperfibrinemia (12 g/l) never reported, as far as we know, by authors using I.E.C. Several hypothesis are advanced to explain this phenomenon. (authors) [French] Ce travail presente l'ensemble des resultats hematologiques obtenus apres irradiation extracorporelle du sang de veaux repartis en 3 series: - veaux temoins: circulation du sang sans irradiation - veaux soumis a une irradiation continue dose globale integree de 40000 rads en 24 heures; - veaux ayant recu la meme dose globale en irradiation fractionnee repartie sur 5 jours (5 heures par jour). Les resultats les plus marquants sont d'une part une lymphopenie precoce se prolongeant durant 7 a 8 semaines et qui pourrait etre reliee aux modifications observees sur les immunoglobulines. D'autre part une hyperfibrinemie (12 g/l) constante, apparemment jamais signalee par d'autres auteurs utilisant l'I.E.C. Plusieurs hypotheses explicatives de ce phenomene sont exposees et sont a l'etude. (auteurs)

Extracorporeal irradiation of calves blood. Effects on: the lymphocytes, the blood-platelet function, seric proteins, and fibrinogen; Irradiation extracorporelle du sang de veau effets sur: les lymphocytes, la fonction plaquettaire, les proteines seriques et le fibrinogene

Energy Technology Data Exchange (ETDEWEB)

Hollard, D.; Suscillon, M.; Benabid, Y.; Concord, E.; Ivanoff, M.; Laurent, M.; Rambaud, F. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1969-07-01

The present paper reports the results obtained after extracorporeal irradiation of circulating blood of calves. Animals are divided in 3 groups as follows: - control animals: blood circulation without irradiation; - calves which received 40000 rads during 24 hours of continuous irradiation; - calves which received the same dose, during a period of 5 days (5 hours every day). The more interesting results are: - the early lymphopenia which persists for 7 or 8 weeks and may be in relationship with the change of immunoglobulins; - a constant hyperfibrinemia (12 g/l) never reported, as far as we know, by authors using I.E.C. Several hypothesis are advanced to explain this phenomenon. (authors) [French] Ce travail presente l'ensemble des resultats hematologiques obtenus apres irradiation extracorporelle du sang de veaux repartis en 3 series: - veaux temoins: circulation du sang sans irradiation - veaux soumis a une irradiation continue dose globale integree de 40000 rads en 24 heures; - veaux ayant recu la meme dose globale en irradiation fractionnee repartie sur 5 jours (5 heures par jour). Les resultats les plus marquants sont d'une part une lymphopenie precoce se prolongeant durant 7 a 8 semaines et qui pourrait etre reliee aux modifications observees sur les immunoglobulines. D'autre part une hyperfibrinemie (12 g/l) constante, apparemment jamais signalee par d'autres auteurs utilisant l'I.E.C. Plusieurs hypotheses explicatives de ce phenomene sont exposees et sont a l'etude. (auteurs)

Use of gamma irradiated viper venom as the toxoid against viper venom poisoning in mice and rabbits

International Nuclear Information System (INIS)

Hati, A.K.; Mandal, M.; Hati, R.N.; Das, S.

1995-01-01

The present paper deals with detoxification of the crude viper (Vipera russelli) venom by gamma irradiation and its effective immunogenic role in Balb/C mice, used as a toxoid. The successful immunization of rabbits with irradiated viper venom toxoid is also reported. Certain biochemical changes of the venom due to radiation exposure and neutralization capacity of the immune sera against phosphodiesterase and protease activity of the crude viper venom have also been studied. The neutralizing potency of Russell's viper venom (RVV) toxoid anti venom (anti venom raised in rabbits against γ-irradiated RVV toxoid adsorbed on aluminium phosphate), in comparison with a commercial bivalent anti venom (as a standard reference) with reference to haemorrhagic, necrotic and lethal effects of Russell's viper envenomation are reported. 25 refs

Effect of gamma irradiation on the microstructure and post-mortem anaerobic metabolism of bovine muscle

International Nuclear Information System (INIS)

Yook, H.-S.; Lee, J.-W.; Lee, K.-H.; Kim, M.-K.; Song, C.-W.; Byun, M.-W.

2001-01-01

Experiments were performed to study the effect of gamma irradiation on morphological properties and post-mortem metabolism in bovine M. sternomandibularis with special reference to ultrastructure, shear force, pH and ATP breakdown. The shortening of sarcomere was not observed in gamma-irradiated muscle, however, the disappearance of M-line and of A- and I-bands was perceptible. During cold storage, the destruction of muscle bundles was faster in the gamma-irradiated muscle than in the non-irradiated with a dose-dependent manner. The same is true for the post mortem pH drop and ATP breakdown. So, experimental results confirmed that the anaerobic metabolism and morphological properties are noticeably affected by gamma irradiation in beef

Dosimetry and operation of irradiation facilities

International Nuclear Information System (INIS)

Vidal, P.E.

1985-01-01

The industrial use of ionizing radiation has required, from the very first, the measurement of delivered and absorbed doses; hence the necessity of providing dosimetric systems. Laboratories, scientists, industries and potential equipment manufacturers have all collaborated in this new field of activity. Dosimetric intercomparisons have been made by each industry at their own facilities and in collaboration with specialists, national organizations and the IAEA. Dosimetry has become a way of ensuring that treatment by irradiation has been carried out in accordance with the rules. It has become in effect assurance of quality. Routine dosimetry should determine a maximum and minimum dose. Numerous factors play a part in dosimetry. Industry is currently in possession of routine dosimetric systems that are sufficiently accurate, fairly easy to handle and reasonable in cost, thereby satisfying all the requirements of industry and the need for control. Dosimetry is important in the process of marketing irradiated products. The operator of an industrial irradiation facility bases his dosimetry on comparison with reference systems. Research aimed at simplifying the practice of routine dosimetry should be continued. New physical and chemical techniques will be incorporated into systems already in use. The introduction of microcomputers into the operation of radiation facilities has increased the value of dosimetry and made the conditions of treatment more widespread. Stress should be placed on research in several areas apart from reference systems, for example: dosimetric systems at temperatures from +8 deg. C to -45 deg. C, over the dose range 100 krad to a little more than 1 Mrad, liquids and fluidized solids carried at high speed through ducts, thin-film liquids circulating at a high flow rate, and various other problems. (author)

Post irradiation characterization of beryllium and beryllides after high temperature irradiation up to 3000 appm helium production in HIDOBE-01

Energy Technology Data Exchange (ETDEWEB)

Fedorov, A.V., E-mail: fedorov@nrg.eu [Nuclear Research and Consultancy Group, Westerduinweg 3, Postbus 25, Petten, 1755 ZG (Netherlands); Til, S. van; Stijkel, M.P. [Nuclear Research and Consultancy Group, Westerduinweg 3, Postbus 25, Petten, 1755 ZG (Netherlands); Nakamichi, M. [Japan Atomic Energy Agency, Rokkasho (Japan); Zmitko, M. [The European Joint Undertaking for ITER and the Development of Fusion Energy, c/ Josep Pla, n° 2, Torres Diagonal Litoral, Edificio B3, Barcelona 08019 (Spain)

2016-01-15

Titanium beryllides are considered as advanced candidate material for neutron multiplier for the helium cooled pebble bed (HCPB) and/or the water cooled ceramic breeder (WCCB) breeder blankets. In the HIDOBE-01 (HIgh DOse irradiation of BEryllium) experiment, beryllium and beryllide pellets with 5 at% and 7 at% Ti are irradiated at four different target temperatures (T{sub irr}): 425 °C, 525 °C, 650 °C and 750 °C up to the dose corresponding to 3000 appm He production in beryllium. The pellets were supplied by JAEA. During post irradiation examinations the critical properties of volumetric swelling and tritium retention were studied. Both titanium beryllide grades show significantly less swelling than the beryllium grade, with the difference increasing with the irradiation temperature. The irradiation induced swelling was studied by using direct dimensions. Both beryllide grades showed much less swelling as compare to the reference beryllium grade. Densities of the grades were studied by Archimedean immersion and by He-pycnometry, giving indications of porosity formation. While both beryllide grades show no significant reduction in density at all irradiation temperatures, the beryllium density falls steeply at higher T{sub irr}. Finally, the tritium release and retention were studied by temperature programmed desorption (TPD). Beryllium shows the same strong tritium retention as earlier observed in studies on beryllium pebbles, while the tritium inventory of the beryllides is significantly less, already at the lowest T{sub irr} of 425 °C.

The AIR's policy on research involving the irradiation of human subjects

International Nuclear Information System (INIS)

Smith, A.N.

1995-01-01

The policy of the Australian Institute of Radiography with regards to the human subject irradiation is outlined. It is stated that members will not irradiate another individual, nor themselves, solely for the purposes of experimentation or research without gaining the prior approval of an institutional ethics committee. Where possible, researchers should consider the use of patient equivalent or human tissue equivalent phantoms. A short list of references has been compiled to assist members in designing research protocols which comply with the stated policy

Detection of irradiated spice in blend of irradiated and un-irradiated spices using thermoluminescence method

International Nuclear Information System (INIS)

Goto, Michiko; Yamazaki, Masao; Sekiguchi, Masayuki; Todoriki, Setsuko; Miyahara, Makoto

2007-01-01

Five blended spice sample were prepared by mixing irradiated and un-irradiated black pepper and paprika at different ratios. Blended black pepper containing 2%(w/w) of 5.4 kGy-irradiated black pepper showed no maximum at glow1. Irradiated black pepper samples, mixed to 5 or 10%(w/w), were identified as 'irradiated' or 'partially irradiated' or 'un-irradiated'. All samples with un-irradiated pepper up to 20%(w/w) were identified as irradiated'. In the case 5.0 kGy-irradiated paprika were mixed with un-irradiated paprika up to 5%(w/w), all samples were identified as irradiated'. The glow1 curves of samples, including irradiated paprika at 0.2%(w/w) or higher, exhibited a maximum between 150 and 250degC. The results suggest the existence of different critical mixing ratio for the detection of irradiation among each spices. Temperature range for integration of the TL glow intensity were compared between 70-400degC and approximate 150-250degC, and revealed that the latter temperature range was determined based on the measurement of TLD100. Although TL glow ratio in 150-250degC was lower than that of 70-400degC range, identification of irradiation was not affected. Treatment of un-irradiated black pepper and paprika with ultraviolet rays had no effect on the detection of irradiation. (author)

Ionic liquids influence on the surface properties of electron beam irradiated wood

Energy Technology Data Exchange (ETDEWEB)

Croitoru, Catalin [“Transilvania” University of Brasov, Product Design and Environment Department, 29 Eroilor Str., 500036, Brasov (Romania); Patachia, Silvia, E-mail: st.patachia@unitbv.ro [“Transilvania” University of Brasov, Product Design and Environment Department, 29 Eroilor Str., 500036, Brasov (Romania); Doroftei, Florica; Parparita, Elena; Vasile, Cornelia [“Petru Poni” Institute of Macromolecular Chemistry, Physical Chemistry of Polymers Department, 41A Gr. Ghica Voda Alley, Iasi (Romania)

2014-09-30

Highlights: • Wood veneers impregnated with three imidazolium-based ionic liquids and irradiated with electron beam were studied by FTIR-ATR, SEM/EDX, AFM, contact angle and image analysis. • ILs preserve the surface properties of the wood (surface energy, roughness, color) upon irradiation, in comparison with the reference wood, but the surface composition is changed by treatment with IL-s, mainly with 1-butyl-3-methylimidazolium tetrafluoroborate. • Under electron beam irradiation covalent bonding of the imidazolium moiety to wood determines a higher resistance to water penetration and spreading on the surface. - Abstract: In this paper, the influence of three imidazolium-based ionic liquids (1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium hexafluorophosphate and 1-hexyl-3-methylimidazolium chloride) on the structure and surface properties of sycamore maple (Acer pseudoplatanus) veneers submitted to electron beam irradiation with a dose of 50 kGy has been studied by using Fourier transform infrared spectroscopy, as well as image, scanning electron microscopy/SEM/EDX, atomic force microscopy and contact angle analysis. The experimental results have proven that the studied ionic liquids determine a better preservation of the structural features of wood (cellulose crystallinity index and lignin concentration on the surface) as well as some of surface properties such as surface energy, roughness, color upon irradiation with electron beam, in comparison with the reference wood, but surface composition is changed by treatment with imidazolium-based ionic liquids mainly with 1-butyl-3-methylimidazolium tetrafluoroborate. Also, under electron beam irradiation covalent bonding of the imidazolium moiety to wood determines a higher resistance to water penetration and spreading on the surface.

Effect of artificial UV irradiation on spore content of stall air and fattening pig breeding

International Nuclear Information System (INIS)

Kalich, J.; Blendl, H.M.

1978-01-01

The influence of a continuous UV irradiation (emitter NN 33/89 original Hanau) during the fattening periods primarily in the bactericide region of 253.7 nm of various intensities on the spore content of air, on the state of health and on the fattening breeding of pigs was tested in two fattening procedures. The high spore number per m 3 air of over 700 000 upon occupying the stall in the first fattening procedure was reduced by 90.5% to about 70 000 after 1 week of UV irradiation, and in the second procedure, from 111 500 to 16 000, i.e. a reduction of 85.5%. The spore content of the stall air then exhibited large deviations reducing and increasing. The same deviations were recorded for dust content. There was no absolute correlation between dust and spore content of the air until the 11th week after starting UV irradiation in either test. The spore content sank in the reference stalls also without UV irradiation, by 29.9% in the first fattening procedure 1 week after occupying the stall and even by 75% in the second procedure. The spore content of the air in the reference stalls also then exhibited deviations sinking and rising as in the test stalls with UV irradiation. Here too, there was no correlation between dust and spore content of the air. The spore content in the air was 2 to 7 times higher in the reference stalls than in the test stalls. One may conclude from the tests that the promoting irradiation strength is between 15 and 20 μW/cm 2 and that short-term stool production in danish stalling, 60 μW/cm 2 are not harmful. Air disinfection with UV irradiation, can only be part of the total hygiene measures taken in veterinary medicine and may only be considered as an important link in the chain of the health promoting and increased efficient hygiene measures in the intensification of aggriculturally useful animals. (orig./AJ) [de

Certification of biological candidates reference materials by neutron activation analysis

Science.gov (United States)

Kabanov, Denis V.; Nesterova, Yulia V.; Merkulov, Viktor G.

2018-03-01

The paper gives the results of interlaboratory certification of new biological candidate reference materials by neutron activation analysis recommended by the Institute of Nuclear Chemistry and Technology (Warsaw, Poland). The correctness and accuracy of the applied method was statistically estimated for the determination of trace elements in candidate reference materials. The procedure of irradiation in the reactor thermal fuel assembly without formation of fast neutrons was carried out. It excluded formation of interfering isotopes leading to false results. The concentration of more than 20 elements (e.g., Ba, Br, Ca, Co, Ce, Cr, Cs, Eu, Fe, Hf, La, Lu, Rb, Sb, Sc, Ta, Th, Tb, Yb, U, Zn) in candidate references of tobacco leaves and bottom sediment compared to certified reference materials were determined. It was shown that the average error of the applied method did not exceed 10%.

Quantitative assessment of multi-isocentric radiosurgical irradiation based on the f factor

International Nuclear Information System (INIS)

Lefkopoulos, D.; Schlienger, M.; Hancilar, T.; Keraudy, K.; Touboul, E.

1995-01-01

To evaluate quantitatively the stereotactic irradiations, we defined a DVH parameter (f) resulting from the lesion underdosage and healthy tissues overdosage curves. The Lesion Underdose Factor (LUF) is the ratio of the lesion volume receiving dose inferior to a reference isodose to the lesion volume. The Healthy Tissue Overdose Factor HTOF quantitates the amount of tissue external to the lesion receiving dose equal to or greater than a given reference isodose relatively to the lesion volume. The LUF and HTOF curves represent the variation of the LUF and HTOF factors as a function of the reference isodose. The f factor is the surface situated below the intersection of the two curves. The optimization goal of the planification procedure could consist in the minimization of f. We have correlated them with clinical results (obliteration of the nidus) of a series of 34 multi-isocenters AVMs linac irradiation. The treatment dose protocol was a peripheral dose of 20 - 25 Gy (50 to 70% isodose range). According to this preliminary study, it seems that f factor provides clinically useful quantitative indices for the treatment plan evaluation. The choice of the optimal treatment plan and reference isodose is realized as follows. For a same patient different treatment plans are calculated by successive modifications of the irradiation parameters, as the number of isocenters, the distances between isocenters, the collimators diameter, the number of arcs and their angular length etc. The choice of optimal treatment plan is based on a clinically validated quantitative factor such as the f factor. According to our preliminary results one should select the treatment plan corresponding to the smallest value of f. The choice of the optimal reference isodose is based on the clinical data (lesion volume and topography, adjacent critical structures) and the LUF and HTOF factors following a well-defined protocol

Standard Reference Development of nuclear material for Tensile and Hardness Test Properties

International Nuclear Information System (INIS)

Choo, Y. S.; Kim, D. S.; Yoo, B. O.; Ahn, S. B.; Baik, S. J.; Chun, Y. B.; Kim, K. H.; Hong, K. P.; Ryu, W. S.

2007-12-01

Standard reference is a official approved data such a coefficient of physics, approved material properties, and etc., which should be analyzed and evaluated by scientific method to acquire official approval for accuracy and credibility of measured data and information. So it could be used broadly and continuously by various fields of nation and society. It is classified to effective standard reference, verified standard reference, and certified standard reference. There are sixteen fields in designated standard references such a physical chemistry field, material field, metal field, and the others. The standard reference of neutron irradiated nuclear structural material is classified to metal field. This report summarized the whole processes about data collection, data production, data evaluation and the suggestion of details evaluation technical standard for tensile and hardness properties, which were achieved by carry out the project 'nuclear material standard reference development' as a result

Standard Reference Development of nuclear material for Tensile and Hardness Test Properties

Energy Technology Data Exchange (ETDEWEB)

Choo, Y. S.; Kim, D. S.; Yoo, B. O.; Ahn, S. B.; Baik, S. J.; Chun, Y. B.; Kim, K. H.; Hong, K. P.; Ryu, W. S

2007-12-15

Standard reference is a official approved data such a coefficient of physics, approved material properties, and etc., which should be analyzed and evaluated by scientific method to acquire official approval for accuracy and credibility of measured data and information. So it could be used broadly and continuously by various fields of nation and society. It is classified to effective standard reference, verified standard reference, and certified standard reference. There are sixteen fields in designated standard references such a physical chemistry field, material field, metal field, and the others. The standard reference of neutron irradiated nuclear structural material is classified to metal field. This report summarized the whole processes about data collection, data production, data evaluation and the suggestion of details evaluation technical standard for tensile and hardness properties, which were achieved by carry out the project 'nuclear material standard reference development' as a result.

Persistent Web References – Best Practices and New Suggestions

DEFF Research Database (Denmark)

Zierau, Eld; Nyvang, Caroline; Kromann, Thomas Hvid

In this paper, we suggest adjustments to best practices for persistent web referencing; adjustments that aim at preservation and long time accessibility of web referenced resources in general, but with focus on web references in web archives. Web referencing is highly relevant and crucial...... refer to archive URLs which depends on the web archives access implementations. A major part of the suggested adjustments is a new web reference standard for archived web references (called wPID), which is a supplement to the current practices. The purpose of the standard is to support general, global...

Decommissioning of an Irradiator MPX-{gamma} - 25M and a neutron Irradiator; Desmantelamiento de un irradiador tipo MPX-{gamma}-25M y de un irradiador de neutrones

Energy Technology Data Exchange (ETDEWEB)

Soguero, Dania; Guerra, Mercedes; Prieto, Enrique; Desdin, Luis, E-mail: sdania@ceaden.edu.cu [Centro de Aplicaciones Tecnologica y Desarrollo Nuclear (CEADEN), La Habana (Cuba)

2013-07-01

In this paper a technology is developed with its procedures in radiation protection to ensure the safety of the process of decommissioning of two irradiators. Both processes are described, the process of decommissioning of a neutron Irradiator 4. 44{center_dot}10{sup 11}Bq, employed in the vegetal radio mutagenesis, and disassembling of an installation of gamma irradiation of 3.33 * 10{sup 12} Bq, self-shielded of category I, model MPX - {gamma} - 25 M. The specific objectives are: a) identify aspects of the contractual assurance, of human and technical resources, b) to evaluate the radiological situation of the process and c) analyze the potential radiological extraordinary events in each of the steps of the process, ensuring the right answers. Evaluation of radiological successful events described can be considered as reference to address the process of disassembling of other similar irradiators.

Ionospheric Change and Solar EUV Irradiance

Science.gov (United States)

Sojka, J. J.; David, M.; Jensen, J. B.; Schunk, R. W.

2011-12-01

The ionosphere has been quantitatively monitored for the past six solar cycles. The past few years of observations are showing trends that differ from the prior cycles! Our good statistical relationships between the solar radio flux index at 10.7 cm, the solar EUV Irradiance, and the ionospheric F-layer peak density are showing indications of divergence! Present day discussion of the Sun-Earth entering a Dalton Minimum would suggest change is occurring in the Sun, as the driver, followed by the Earth, as the receptor. The dayside ionosphere is driven by the solar EUV Irradiance. But different components of this spectrum affect the ionospheric layers differently. For a first time the continuous high cadence EUV spectra from the SDO EVE instrument enable ionospheric scientists the opportunity to evaluate solar EUV variability as a driver of ionospheric variability. A definitive understanding of which spectral components are responsible for the E- and F-layers of the ionosphere will enable assessments of how over 50 years of ionospheric observations, the solar EUV Irradiance has changed. If indeed the evidence suggesting the Sun-Earth system is entering a Dalton Minimum periods is correct, then the comprehensive EVE solar EUV Irradiance data base combined with the ongoing ionospheric data bases will provide a most fortuitous fiduciary reference baseline for Sun-Earth dependencies. Using the EVE EUV Irradiances, a physics based ionospheric model (TDIM), and 50 plus years of ionospheric observation from Wallops Island (Virginia) the above Sun-Earth ionospheric relationship will be reported on.

Forecast of hourly global horizontal irradiance based on structured Kernel Support Vector Machine: A case study of Tibet area in China

International Nuclear Information System (INIS)

Jiang, He; Dong, Yao

2017-01-01

Highlights: • The structured variable selection in Kernel SVM is implemented using two ways. • The two-way interaction model is considered to enforce Heredity Principle. • SVMIC is used to select the kernel parameter in proposed approaches. • Simple and fast computations algorithms are derived. - Abstract: Various applications of forecasting effective global horizontal irradiance play increasingly vital role in grid-connected photovoltaic installations, but suffer from forecasting inaccuracy and prohibitively expensive computational cost. Although Support Vector Machine (SVM) is one of the most powerful forecasting approaches, it does not provide an interpretable model. This motivates penalized variable selection methods to be introduced to SVM to select important variables. However, in some forecasting problems, there are some underlying logic or hierarchical structure such as heredity principle among the variables. Penalized Kernel SVM approaches do not take heredity principles into consideration when enforcing sparsity. This paper investigates structural variable selection in Kernel SVM based approach which pursues heredity principle and sparsity simultaneously. To achieve heredity principle, both optimization and procedure based structural variable selection approaches are studied in the Kernel SVM. Computationally, we derive fast and simple-to-implement algorithms to perform structural variable selection and solar irradiance forecasting. Furthermore, Support Vector Machines Information Criterion is utilized to select the kernel parameters to guarantee the model consistency. Real data experiments directly reveal that our proposed KSVM-SVS based approach following heredity principle delivers superior performances in terms of forecasting accuracy comparing with other competitors.

Transmission of UV-irradiance into nectarine fruit

International Nuclear Information System (INIS)

Blanke, M.M.

1996-01-01

With the global depletion of the ozone layer, leaves and fruits are increasingly exposed to UV-irradiance on the tree. Some fruits are additionally exposed postharvest to artificial germicidal W-irradiance, leading to a cumulative effect. This paper examines the transmission of UV-light (200-400 nm) by the peel of ripe nectarine fruit using UV/VIS spectrophotometry to aid understanding of UV-effects and assess the sensitivity of the peel to UV wavelengths. Yellow peel of nectarine fruit transmitted less than 0.1 % in the UV-C range of 220 to 280 nm. With longer wavelenghts, UV-light transmission increased slowly from 0.4 % at 284 nm to 1.6 % at 320 nm and, in the UV-A region, progressively from 1.9 % at 330 nm to a maximum of 13 % of incident irradiance at 400 nm. Red peel of nectarine fruit transmitted less than 0.1 % of UV-C and UV-B light, but up to 0.9 % of incident UV-A light at 400 nm. Conversely, UV-absorption of nectarine peel decreased with longer wavelengths. Hence, fruit parenchyma is more affected by UV-irradiance at wavelengths above ca. 280 nm and underneath yellow than underneath red peel

Determination of hydrogen in ice and in irradiated frozen chicken

International Nuclear Information System (INIS)

Hitchcock, C.H.S.

1996-01-01

The irradiation of food is a process which can improve the quality and safety of the diet; it complements more familiar methods of food preservation such as cooking and freezing. The Food Safety Act 1990 allows the controlled production and sale of irradiated food in the UK, but the market is being initially inhibited by consumer resistance; this is partly based on lack of confidence. While a detection test is not officially considered to be a prerequisite for control of irradiated food, it would provide additional safeguards valued by the consumer. Two types of test are needed; firstly, a precise reference method that can be undertaken in a specialised laboratory, preferably leading to an estimation of the original radiation dose, and secondly, a rapid screening method that can be used more widely. In the second category, a simple cheap test for the presence of the hydrogen generated during irradiation might provide a suitable basis. (author)

Fast kinetics of the oxygen effect in irradiated mammalian cells

International Nuclear Information System (INIS)

Watts, M.E.; Maughan, R.L.; Michael, B.D.

1978-01-01

A technique using a fast gas transfer with a single pulse of electrons (the gas-explosion technique) has been used to investigate the time-dependence of the dose-modifying action of oxygen in irradiated V79 Chinese hamster cells. Oxygen did not significantly alter the shapes of the survival curves. The dose-modifying factor between the fully oxic and fully hypoxic (oxygen at 9000 ms) curve was 2.6. The dose-modifying factor for the survival curve drawn for oxygen contact at 0.3 ms after irradiation was 1.5 relative to the hypoxic curve. The duration of the post-effect (oxygen contact after irradiation) indicated that oxygen-dependent damage has a lifetime extending into the ms time-range. In the pre-effect time region (oxygen contact before irradiation) 1 to 2 ms oxygen contact was required to achieve the full sensitization. The results are discussed with reference to the diffusion time for oxygen to reach the sensitive site within the cell. (U.K.)

Globalization and Its Impact on Education with Specific Reference to Education in South Africa

Science.gov (United States)

Moloi, K. C.; Gravett, S. J.; Petersen, N. F.

2009-01-01

As globalization of the world economy continues unabated, a parallel growth of globalization of knowledge is also taking place. This latter trend is little affected by the boundaries between developed and less developed countries and is having a particular impact on trends in education. This article looks at the impact of globalization within the…

Scientific activities in support of the BR2 operation and irradiation programmes

International Nuclear Information System (INIS)

Koonen, E.

2006-01-01

One of the major characteristics of the BR2 reactor is the fact that the core configuration is essentially variable. This allows to optimize the irradiation conditions of various experiments and to minimize the fuel consumption. In order to do that, BR2 has its own autonomous reactor physics cell. In order to allow for on-line measurements of the major irradiation parameters, BR2 has extended its own proven data acquisition system to serve this purpose. This system, called BIDASSE (for BR2 Integrated Data Acquisition System for Survey and Experiments), originally designed for the follow-up of all BR2 operational parameters, is since several years extensively used for experiments. The object rives of research at the BR2 are to evaluate and adjust provisional irradiation conditions by adjustments of the environment, axial and azimuthal positioning of the samples, global power level, ... ; to deliver reliable, well defined irradiation condition and fluence data during and after irradiation; to assist the designer of new irradiation devices by simulations and neutronic optimisations of design options and o provide the experimenters with accurate on-line information on the evolution of their ongoing irradiation projects

Food irradiation as a quarantine treatment

International Nuclear Information System (INIS)

Ignatowicz, S.

1998-01-01

Because of multiplicity of invertebrate pests of fresh and durable agricultural products which are treaded internationally there are frequent instances were products are unacceptable without an approved prior disinfestation treatment. The majority of these pests are regulated by quarantine inspections at the ports of exit and entry. Where there is risk of rejection of products if quarantine pests are found at inspection it is frequently prudent to apply a disinfestation treatment. Control of these pests in agriculture produce by fumigation is no longer desirable from the points of human health and global environment. Irradiation could be feasible and practical alternative with a broad applicability to commodities and pests. Quarantine disinfestation of most agricultural products seems to be achievable at the recommended generic dose of 300 Gy. Because irradiation applied at doses ranging about 300 Gy does not cause immediate mortality of all insects, mites or nematodes, live pests could be present after treatment of agricultural produce intended for international trade. In such case a marker of irradiation that is easily applied may be very useful in allaying concerns of some quarantine inspectors that inevitably occur when a living insect of quarantine importance is found in a shipment. (author)

Effects of antioxidant and package materials on the quality of irradiated rugao ham

International Nuclear Information System (INIS)

Cao Hong; Chen Xiulan; Bao Jianzhong; Han Yan; Jiang Yunsheng; Wang Zhijun; Dong Jie; Yang Hairong; Xi Jun

2008-01-01

Irradiation could extend the shelf life of ham, but irradiation also facilitates the oxidation of fat. Different packaging materials and combination of antioxidants were used to deal with Rugao ham in order to lower the level of antioxidation caused by irradiation treatment. The peroxide value of fat was detected as the reference index. The results were indicated that the fat peroxide value of all samples increased within the storage of 100d, and then decreased. Aluminum film compound packaging showed a better effect than polyethylene plastic bag. The antioxideant combination of 0.5% tea-polyphenol, 0.5% Vc, 0.5% citric acid, 5% sodium alginate, applied on 4 kGy irradiated samples was measured the lowest peroxide value of fat among all the treatments. (authors)

Reference design (MK-I and MK-II) for experimental multi-purpose VHTR

International Nuclear Information System (INIS)

Miyamoto, Yoshiaki; Suzuki, Kunihiko; Sato, Sadao

1975-10-01

This report summarizes the results of a study on thermal and mechanical performances of the core, which are obtained in course of reference design (Mk-I and Mk-II) for the experimental multi-purpose VHTR: (1) Design criteria, design methods and design data. These bases are also discussed in order to refer in the case of proceeding a next design work. (2) The results of performance analysis such as the initial core and its prediction for the irradiated core. (auth.)

Instrumental neutron activation analysis for the certification of biological reference materials

International Nuclear Information System (INIS)

Ambulkar, M.N.; Chutke, N.L.; Garg, A.N.

1992-01-01

A multielemental instrumental neutron activation analysis (INAA) method by short and long irradiation has been employed for the determination of 22 minor and trace constituents in two proposed Standard Reference Materials P-RBF and P-WBF from Institute of Radioecology and Applied Nuclear Techniques, Czechoslovakia. Also some biological standards such as Bowen's Kale, Cabbage leaves (Poland) including wheat and rice flour samples of local origin were analysed. It is suggested that INAA is an ideal method for the certification of reference materials of biological matrices. (author). 7 refs., 1 tab

Experience in Cuba in the licensing during import, commissioning and operation of an Irradiator LLCo ISOGAMMA

International Nuclear Information System (INIS)

Forteza, Yamil Lopez; Reyes, Yolanda Perez; Garcia, Jose R. Quevedo; Molina, Igor I. Sarabia; Gonzalez, Leonel Omarovich; Zubiaur, Omar Cruz

2013-01-01

This work presented the experiences during the process of licensing an irradiator ISOGAMMA LLCo model according to the recommendations of the International Atomic Energy (IAEA). Aspects of the safety assessment are detailed, as well as control and verification requirements for radiation safety and security at different stages of the process (import, transportation, installation irradiator loading 60Co sources, commissioning and operation) of irradiator recently installed in Cuba. The results of the evaluation carried a source of reference and consultation necessary for the work of the regulator to consider for similar processes that lie ahead in other facilities irradiation

New global ICT-based business models

DEFF Research Database (Denmark)

The New Global Business model (NEWGIBM) book describes the background, theory references, case studies, results and learning imparted by the NEWGIBM project, which is supported by ICT, to a research group during the period from 2005-2011. The book is a result of the efforts and the collaborative ...... The NEWGIBM Cases Show? The Strategy Concept in Light of the Increased Importance of Innovative Business Models Successful Implementation of Global BM Innovation Globalisation Of ICT Based Business Models: Today And In 2020......The New Global Business model (NEWGIBM) book describes the background, theory references, case studies, results and learning imparted by the NEWGIBM project, which is supported by ICT, to a research group during the period from 2005-2011. The book is a result of the efforts and the collaborative....... The NEWGIBM book serves as a part of the final evaluation and documentation of the NEWGIBM project and is supported by results from the following projects: M-commerce, Global Innovation, Global Ebusiness & M-commerce, The Blue Ocean project, International Center for Innovation and Women in Business, NEFFICS...

Damage studies on tungsten due to helium ion irradiation

International Nuclear Information System (INIS)

Dutta, N.J.; Buzarbaruah, N.; Mohanty, S.R.

2014-01-01

Highlights: • Used plasma focus helium ion source to study radiation induced damage on tungsten. • Surface analyses confirm formation of micro-crack, bubbles, blisters, pinholes, etc. • XRD patterns confirm development of compressive stress due to thermal load. • Reduction in hardness value is observed in the case of exposed sample. - Abstract: Energetic and high fluence helium ions emitted in a plasma focus device have been used successfully to study the radiation induced damage on tungsten. The reference and irradiated samples were characterized by optical microscopy, field emission scanning electron microscopy, X-ray diffraction and by hardness testers. The micrographs of the irradiated samples at lower magnification show uniform mesh of cracks of micrometer width. However at higher magnification, various types of crystalline defects such as voids, pinholes, bubbles, blisters and microcracks are distinctly noticed. The prominent peaks in X-ray diffraction spectrum of irradiated samples are seen shifted toward higher Bragg angles, thus indicating accumulation of compressive stress due to the heat load delivered by helium ions. A marginal reduction in hardness of the irradiated sample is also noticed

Microbial pathogens in raw pork, chicken, and beef: benefit estimates for control using irradiation

Energy Technology Data Exchange (ETDEWEB)

Roberts, T.

1985-12-01

Various control procedures have been suggested for reducing foodborne infectious diseases. Receiving considerable attention is irradiation. This report estimates the medical and wage (or productivity) benefits associated with prevention of five human diseases transmitted by beef, pork, and chicken. (These diseases can also be transmitted by other vectors, such as eggs, milk, and pets. But these sources are not included in the analysis.) All of these foodborne infectious diseases - salmonellosis, campylobacteriosis, trichinosis, tapeworm, and toxoplasmosis - could be significantly reduced by irradiating meat and poultry. The Food and Drug Administration (FDA) has just approved irradiation of pork to prevent trichinosis (50FR 29658-59) and is considering approval of irradiation of chicken to kill Salmonella. 22 references.

Microbial pathogens in raw pork, chicken, and beef: benefit estimates for control using irradiation

International Nuclear Information System (INIS)

Roberts, T.

1985-01-01

Various control procedures have been suggested for reducing foodborne infectious diseases. Receiving considerable attention is irradiation. This report estimates the medical and wage (or productivity) benefits associated with prevention of five human diseases transmitted by beef, pork, and chicken. (These diseases can also be transmitted by other vectors, such as eggs, milk, and pets. But these sources are not included in the analysis.) All of these foodborne infectious diseases - salmonellosis, campylobacteriosis, trichinosis, tapeworm, and toxoplasmosis - could be significantly reduced by irradiating meat and poultry. The Food and Drug Administration (FDA) has just approved irradiation of pork to prevent trichinosis (50FR 29658-59) and is considering approval of irradiation of chicken to kill Salmonella. 22 references

SEM analysis for irradiated materials

International Nuclear Information System (INIS)

Liu Xiaosong; Yao Liang

2008-06-01

A radiation-proof Scanning Electron Microscope (SEM) system is introduced. It has been widely used in various areas. For analyzing radioactive samples, normal SEM system needs lots of alterations. Based on KYKY-2800B SEM, the sample room, belt line, operating table and aerator were updated. New radiation-proof SEM system has used to analytic surface contaminated samples and RPV materials samples. An elementary means of SEM analysis for radioactive samples was studied, and this examination supported some available references for further irradiated fuel researches. (authors)

Transportation of irradiated fuel elements

International Nuclear Information System (INIS)

Preece, A.H.

1980-01-01

The report falls under the headings: introduction (explaining the special interest of the London Borough of Brent, as forming part of the route for transportation of irradiated fuel elements); nuclear power (with special reference to transport of spent fuel and radioactive wastes); the flask aspect (design, safety regulations, criticisms, tests, etc.); the accident aspect (working manual for rail staff, train formation, responsibility, postulated accident situations); the emergency arrangements aspect; the monitoring aspect (health and safety reports); legislation; contingency plans; radiation - relevant background information. (U.K.)

Incidence of hypothyroidism after irradiation of the neck with special reference to lymphoma patients; A retrospective and prospective analysis

Energy Technology Data Exchange (ETDEWEB)

Feyerabend, T; Kapp, B; Richter, E; Becker, W; Reiners, C [Wuerzburg Univ. (Germany, F.R.). Klinik fuer Radioonkologie Wuerzburg Univ. (Germany, F.R.). Klinik fuer Nuklearmedizin

1990-01-01

Twenty-eight patients were studied prospectively in order to determine the incidence of hypothyroidism after mantle irradiation for malignant lymphoma. This group was compared with a historical group of 65 patients, among them 36 patients with malignant lymphoma. The mean follow-up was 30 months for the prospective group and 46 months for the retrospective group. The mean thyroid dose for irradiated malignant lymphomas in the prospective and the retrospective group was 45 Gy and 43 Gy respectively. For other tumors with neck irradiation (retrospective group) the mean thyroid dose was 53 Gy. There were no cases of clinical hypothyroidism in our study. As for subclinical hypothyroidism which is characterised by elevated TSH, the incidence was 22% in the prospective group and 3% in the retrospective group, i.e. 8/93 patients showed a hypothyroid dysfunction. Three of the 8 patients with subclinical hypothyroidism had undergone lymphangiography before radiotherapy. Due to the elevated iodine pool a lymphangiogram is considered as a risk factor for hypothyroidism as well as for hyperthyroidism, which we observed twice in the prospective group. Evaluation of the thyroid function before lymphangiography and irradiation as well as regular thyroid function studies during the follow-up are recommended in order to detect hypothyroidism in time. (orig.).

Radii and refractive index changes in γ-irradiated optical fibers

International Nuclear Information System (INIS)

Bertolotti, M.; Ferrari, A; Scudieri, F.; Serra, A.

1979-01-01

Radiation effects in bulk glasses have received great attention in the last few years. In optical fibers the parameters studied have been the optical attenuation at different wavelengths and the luminescence generated by irradiation. A report is presented on some preliminary experiments showing that sensible changes in both dimensions and refractive indices occur even in the case of simple defect introduction, as it is for γ-rays, and even at relatively low irradiation doses (e.g. 1 Krad). Moreover the effects anneal out at room temperature in a few days. The measurements have been made with an optical interferometric technique in which a comparison is made between an unirradiated reference fiber sample and the irradiated specimen. The fiber examined was a Pb-silicate core/borosilicate clad fiber. (U.K.)

Curcumin Protects Against the Acute Inflammatory Process in Irradiated Rats

International Nuclear Information System (INIS)

El-Ghazaly, M.A.; Nada, A.S.; Hegazy, M.E.; Kenawy, S.A.

2010-01-01

Nutraceuticals that provide medical or health benefits, including prevention and treatment of disease may be advantageous in inflammation and exposure to radiation. The aim of this study was to investigate the potential of curcumin to modulate, counteract or prevent the inflammatory response induced in irradiated and non-irradiated rats using the carrageenan air-pouch model as an acute model. Diclofenac was used as a reference standard non-steroidal anti-inflammatory drug (NSAID). Results indicated that exposure of rats to a single dose of gamma-radiation (6 Gy) before induction of inflammation increased production of prostaglandin E2 (PGE2), tumour necrosis factor-alpha (TNF-alpha) and malondialdehyde (MDA) levels in serum. Blood glutathione (GSH) was shown to be reduced in irradiated animals. Curcumin suppressed the elevated levels of TNF-alpha, PGE2 and MDA and was able to restore blood GSH levels. Reduction in liver contents of copper (Cu), zinc (Zn), selenium (Se) and iron (Fe) was recorded after irradiation of animals before induction of inflammation. Curcumin restored the hepatic concentrations of these trace elements. The present results suggest that irradiation of rats caused marked changes in the inflammatory response while curcumin suppressed the inflammatory response in both irradiated and control animals.

Perspectives on treatment with irradiation in Slovenia

Directory of Open Access Journals (Sweden)

Primož Strojan

2007-12-01

Full Text Available Background: Radiotherapy is one of the three main modalities of cancer treatment. However, effective treatment with radiotherapy may only be assured by highly advanced irradiation facilities, including systems for planning, performing and quality control of irradiation. The second requirement assuring an effective treatment is proper capacities of treatment units and computer equipment to provide a timely access to treatment to > 50 % of all cancer patients and a proper structure and number of staff specialized in handling with radiotherapy equipment. In Slovenia, only 38 % of cancer patients are treated with radiotherapy. In general, the waiting times of patients referred to radiotherapy are too long. Therefore, further development and upgrading of irradiation facilities will remain a priority in oncology in Slovenia also in the future. At the same time, in our endeavors to meet the set goals, we have been facing unforeseen problems both with human resources and inadequate financial appreciation of radiotherapeutic services that, without significant national aid, do not yield sufficient funds for renewal and upgrading of equipment and its further expansion.

Morphological changes produced by acid dissolution in Er:YAG laser irradiated dental enamel.

Science.gov (United States)

Manuela Díaz-Monroy, Jennifer; Contreras-Bulnes, Rosalía; Fernando Olea-Mejía, Oscar; Emma Rodríguez-Vilchis, Laura; Sanchez-Flores, Ignacio

2014-06-01

Several scientific reports have shown the effects of Er:YAG laser irradiation on enamel morphology. However, there is lack of information regarding the morphological alterations produced by the acid attack on the irradiated surfaces. The aim of this study was to evaluate the morphological changes produced by acid dissolution in Er:YAG laser irradiated dental enamel. Forty-eight enamel samples were divided into four groups (n = 12). GI (control); Groups II, III, and IV were irradiated with Er:YAG at 100 mJ (12.7 J/cm(2) ), 200 mJ (25.5 J/cm(2) ), and 300 mJ (38.2 J/cm(2) ), respectively, at 10 Hz without water irrigation. Enamel morphology was evaluated before-irradiation, after-irradiation, and after-acid dissolution, by scanning electron microscopy (SEM). Sample coating was avoided and SEM analysis was performed in a low-vacuum mode. To facilitate the location of the assessment area, a reference point was marked. Morphological changes produced by acid dissolution of irradiated enamel were observed, specifically on laser-induced undesired effects. These morphological changes were from mild to severe, depending on the presence of after-irradiation undesired effects. © 2014 Wiley Periodicals, Inc.

Prostate cancer: experience with definitive irradiation in the aged

International Nuclear Information System (INIS)

Green, N.; Bodner, H.; Broth, E.

1985-01-01

When considering therapeutic options for localized prostate cancer, stage and grade of disease have been the most important determinants. In the elderly, the nominal age has assumed increasing importance in the final decision. A balanced judgment must be reached between the patient's normal life expectancy and the rapidity with which the cancer may be expected to express its malignant potential. By careful attention to patient selection and the details of treatment, definitive irradiation can improve quality of life and survival. Of 63 patients aged seventy-three to ninety years referred for irradiation, 56 were found medically suitable for definitive treatment. A review of the authors experience is presented

Development of reference material for proficiency tests: arsenic in fish tissue

International Nuclear Information System (INIS)

Santana, Luciana Vieira de; Sarkis, Jorge E.S.; Ulrich, Joao C.; Hortellani, Marcos Antonio

2013-01-01

Proficiency tests (PT) are extensively used to evaluate the analytical competence of laboratories, and are also used as a part of accreditation processes. For this reason are important tool for quality control of laboratories including laboratories that act directly with food exporting companies. In Brazil there are no providers of proficiency testing for toxic metals, such as arsenic in fish tissue. This study presents a protocol to produce reference material to be used in proficiency test for arsenic in fish tissue following the recommendations of the ISO Guide 35. The preparation scheme consisted of: selecting of individuals, cleaning of scale and skin, trituration, homogenization, and spiking with arsenic at two levels of concentration. The mixture was then irradiated in a cyclotron Cyclone 30 Applications ion beam with cobalt 60 at 10.00 ± 1.05 KGy, before being packed into sachets. To verify the efficacy of the irradiation procedure, 26 (randomly selected) irradiated sachets and 26 non-irradiated sachets were assessed for homogeneity and stability. The results indicate that irradiation with cobalt 60 is crucial for ensuring the preservation of the integrity of the material, providing stable material at room temperature for 2 months. The samples can therefore be transported at room temperature. (author)

Development of reference material for proficiency tests: arsenic in fish tissue

Energy Technology Data Exchange (ETDEWEB)

Santana, Luciana Vieira de; Sarkis, Jorge E.S.; Ulrich, Joao C.; Hortellani, Marcos Antonio, E-mail: santana-luciana@ig.com.br, E-mail: jesarkis@ipen.br, E-mail: jculrich@ipen.br, E-mail: mahortel@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2013-07-01

Proficiency tests (PT) are extensively used to evaluate the analytical competence of laboratories, and are also used as a part of accreditation processes. For this reason are important tool for quality control of laboratories including laboratories that act directly with food exporting companies. In Brazil there are no providers of proficiency testing for toxic metals, such as arsenic in fish tissue. This study presents a protocol to produce reference material to be used in proficiency test for arsenic in fish tissue following the recommendations of the ISO Guide 35. The preparation scheme consisted of: selecting of individuals, cleaning of scale and skin, trituration, homogenization, and spiking with arsenic at two levels of concentration. The mixture was then irradiated in a cyclotron Cyclone 30 Applications ion beam with cobalt 60 at 10.00 ± 1.05 KGy, before being packed into sachets. To verify the efficacy of the irradiation procedure, 26 (randomly selected) irradiated sachets and 26 non-irradiated sachets were assessed for homogeneity and stability. The results indicate that irradiation with cobalt 60 is crucial for ensuring the preservation of the integrity of the material, providing stable material at room temperature for 2 months. The samples can therefore be transported at room temperature. (author)

Application of ESR to identification of irradiated foodstuffs

Energy Technology Data Exchange (ETDEWEB)

Raffi, J. [Aix-Marseille-3 Univ., 13 - Marseille (France); Agnel, J.P. [CEA Centre d`Etudes de Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Physiologie Vegetale et Ecosystemes; Belliardo, J.J. [BCR, Bruxelles (Belgium)

1994-11-01

The conditions required to use Electron Spin Resonance (ESR) in identification of irradiated foods is first described. Then we present the results of an intercomparison sponsored by the Community Bureau of Reference involving 22 european laboratories on meat and fish bones and fruits. Then the ESR protocols given to the BCR are described. (authors). 14 refs., 8 figs., 5 annexes.

Measurement of global solar radiation over Brunei Darussalam

International Nuclear Information System (INIS)

Malik, A.Q.; Ak Abd Malik Abd Raub Pg Ghani

2006-01-01

Measurements of global solar radiation on a horizontal surface were carried out for a period of 11 months starting from June 2001 to April 2002. The pyrano meter (Kipp and Zonen) was placed at the top of the library building of University of Brunei Darussalam, which affords optimum exposure to the instrument sensor without appreciable obstacle for incoming global radiation. The maximum and minimum monthly-averaged global irradiations of 553 W/m 2 and 433 W/m 2 were recorded for the months of March and October respectively. The variation of global solar radiation can be divided into two distinct groups - the low radiation values being associated with cloud and turbidity while the high values are associated with less turbid and cloudy periods

Food Irradiation. Standing legislation

International Nuclear Information System (INIS)

Verdejo S, M.

1997-01-01

The standing legislation in Mexico on food irradiation matter has its basis on the Constitutional Policy of the Mexican United States on the 4 Th. article by its refers to Secretary of Health, 27 Th. article to the Secretary of Energy and 123 Th. of the Secretary of Work and Social Security. The laws and regulations emanated of the proper Constitution establishing the general features which gives the normative frame to this activity. The general regulations of Radiological Safety expedited by the National Commission for Nuclear Safety and Safeguards to state the specifications which must be fulfill the industrial installations which utilizing ionizing radiations, between this line is founded, just as the requirements for the responsible of the radiological protection and the operation of these establishments. The project of Regulation of the General Health Law in matter of Sanitary Control of Benefits and Services, that in short time will be officialized, include a specific chapter on food irradiation which considers the International Organizations Recommendations and the pertaining harmonization stated for Latin America, which elaboration was in charge of specialized group where Mexico was participant. Additionally, the Secretary of Health has a Mexican Official Standard NOM-033-SSA1-1993 named 'Food irradiation; permissible doses in foods, raw materials and support additives' standing from the year 1995, where is established the associated requirements to the control registers, service constancies and dose limits for different groups of foods, moreover of the specific guidelines for its process. This standard will be adequate considering the updating Regulation of Benefits and Services and the limits established the Regulation for Latin America. The associated laws that cover in general terms it would be the requirements for food irradiation although such term is not manageable. (Author)

Certified reference materials of trace elements in water

Indian Academy of Sciences (India)

Many decisions regarding the suitability of material/products are based on the ... In the present scenario of globalization of economy, use of certified reference ... our national accreditation body, National Accreditation Board for Testing and ...

Traceability of a panoramic gamma irradiator using different TLD systems as transfer Instruments; Trazabilidad de un irradiador panoramico mediante sistemas de dosimetria TL

Energy Technology Data Exchange (ETDEWEB)

Romero, A. M.; Saez, J. C

1994-07-01

This work shows the calibration in terms of the new operational radiological quantities Hp (10) and H(10) for different TLD systems (Harshaw TLD-100 and Panasonic UD-002) used in personal and environmental monitoring. The irradiations were performed in the Spanish Reference Laboratory in radiation protection levels, managed by the CIEMAT Metrology of ionizing radiations Unit. With those data, different calibrations of a panoramic gamma irradiator in terms of the radiological quantity for unit of time were established, providing the traceability of the irradiator to the Reference Laboratory using the corresponding TLD systems as transfer instruments. (Author) 9 refs.

Traceability of a panoramic gamma irradiator using different TLD systems as transfer instruments; Trazabilidad de un irradiador panoramico mediante sistemas de dosimetria TL

Energy Technology Data Exchange (ETDEWEB)

Romero, A.M.; Saez, J.C.

1994-08-01

This work shows the calibration in terms of the new operational radiological quantities Hp(10) and H*(10) for different TLD systems (Harshaw TLD-100 and Panasonic UD-802) used in personal and environmental monitoring. The irradiations were performed in the Spanish Reference Laboratory in radiation protection levels, managed by the CIEMAT Metrology of ionizing radiations Unit. With these data, different calibrations of a panoramic gamma irradiator in terms of the radiological quantity for unit of time were established, providing the traceability of the irradiator to the Reference Laboratory using the corresponding TLD systems as transfer instruments. (Author) 9 refs.

Climate change and the World Bank: opportunity for global governance?

International Nuclear Information System (INIS)

Boehmer-Christiansen, S.A.

1999-01-01

The direct and indirect efforts of the World Bank and its off-spring, the Global Environment Facility (GEF), to become leading international agents of global environmental 'governance' and 'sustainable development' are described and analysed politically with reference to the development of an implementation regime of the Framework Convention on Climate Change (FCCC). The Bank/GEF are seen as engaging in a potentially dangerous experiment of 'global ecological modernisation', or industrial transformation, in 'emerging economies', an experiment legitimised by reference to the catastrophic threat of man-made 'global warming'. This threat is already being translated into political, commercial and bureaucratic benefits accruing to a small global elite. How was this achieved and what are the likely political implications? (author)

Comparison of Pyranometers and Reference Cells on Fixed and One-axis Tracking Surfaces

Energy Technology Data Exchange (ETDEWEB)

Dooraghi, Michael R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sengupta, Manajit [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Vignola, Frank [University of Oregon; Peterson, Josh [University of Oregon; Mavromatakis, Fotis [Technological Educational Institute of Crete; Chiu, Chun-Yu [University of Oregon

2017-10-12

Photovoltaic (PV) system perfomance is monitored by a wide variety of sensors. These instruments range from secondary standard pyranometers to photodiode-based pyranometers to reference cells. Although instruments are mounted in the plane of array of the modules a wide range of results have been obtained. Some of these difference have been assumed to come from systematic uncertainties associated with the irradiance sensors. This study is an attempt to quantify these differences by comparing the output of selected thermopile-based pyranometers to photodiode-based pyranometers and reference cells on a horizontal surface, a fixed-tilt surface, and a one-axis tracking surface. This analysis focuses on clear-sky results from two sites with different climatic conditions. Several important features were observed. Photodiode-based pyranometers and reference cells produce widely different results under clear skies, especially at larger angles-of-incidence even though both instruments are based on measuring the short circuit current of solar cells. The difference is caused by the scattering of light as it passes through the glazing of the reference cell or the diffuser lens of the photodioded- base pyranometer. Both instruments are shown to have similar response to the spectral distribution of the irradiance when compared to the thermopile-based pyranometer that has a response nearly independent of the wavelength of light used by PV modules.

Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This test method covers a procedure for the determination of a spectral mismatch parameter used in performance testing of photovoltaic devices. 1.2 The spectral mismatch parameter is a measure of the error, introduced in the testing of a photovoltaic device, caused by mismatch between the spectral responses of the photovoltaic device and the photovoltaic reference cell, as well as mismatch between the test light source and the reference spectral irradiance distribution to which the photovoltaic reference cell was calibrated. Examples of reference spectral irradiance distributions are Tables E490 or G173. 1.3 The spectral mismatch parameter can be used to correct photovoltaic performance data for spectral mismatch error. 1.4 This test method is intended for use with linear photovoltaic devices. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, a...

Crack-arrest tests on two irradiated high-copper welds

International Nuclear Information System (INIS)

Iskander, S.K.; Corwin, W.R.; Nanstad, R.K.

1994-03-01

The objective of the Heavy-Section Steel Irradiation Program Sixth Irradiation Series is to determine the effect of neutron irradiation on the shift and shape of the lower-bound curve to crack-arrest toughness data. Two submerged-arc welds with copper contents of 0.23 and 0.31 wt % were commercially fabricated in 220-mm-thick plate. Crack-arrest specimens fabricated from these welds were irradiated at a nominal temperature of 288 degrees C to an average fluence of 1.9 x 10 19 neutrons/cm 2 (>1 MeV). This is the second report giving the results of the tests on irradiated duplex-type crack-arrest specimens. A previous report gave results of tests on irradiated weld-embrittled-type specimens. Charpy V-notch (CVN) specimens irradiated in the same capsules as the crack-arrest specimens were also tested, and a 41-J transition temperature shift was determined from these specimens. open-quotes Mean close-quote curves of the same form as the American Society of Mechanical Engineers (ASME) K la curve were fit to the data with only the open-quotes reference temperatureclose quotes as a parameter. The shift between the mean curves agrees well with the 41-J transition temperature shift obtained from the CVN specimen tests. Moreover, the four data points resulting from tests on the duplex crack-arrest specimens of the present study did not make a significant change to mean curve fits to either the previously obtained data or all the data combined

A global awareness

International Nuclear Information System (INIS)

Guesnerie, R.

2007-01-01

Today there is no doubt of the global warming. The author presents the diagnostic of the environmental impacts of the climatic change but also the economic impacts. Illustrated by many references of scenario, he analyses then the possible actions and programs. (A.L.B.)

Irradiation of mixed UO2-PuO2 oxide samples for fast neutron reactor fuel elements

International Nuclear Information System (INIS)

Mikailoff, H.; Mustelier, J.; Bloch, J.; Conte, M.; Hayet, L.; Lauthier, J.C.; Leclere, J.

1968-01-01

Thermal flux irradiation testings of small mixed oxide pellets UPuO 2 fuel elements were performed in support of the fuel reference design for the Phenix fast reactor. The effects of different parameters (stoichiometry, pellet density, pellet clad gap). on the behaviour of the oxide (temperature distribution, microstructural changes, fission gas release) were investigated in various irradiation conditions. In particular, the effect of fuel density decrease and power rate increase on thermal performances were determined on short term irradiations of porous fuels. (authors) [fr

Conservatism of ASME KIR-reference curve with respect to crack arrest

International Nuclear Information System (INIS)

Wallin, K.; Rintamaa, R.; Nagel, G.

1999-01-01

The conservatism of the RT NDT temperature indexing parameter and the ASME K IR -reference curve with respect to crack arrest toughness, has been evaluated. Based on an analysis of the original ASME K Ia data, it was established that inherently, the ASME K IR -reference curve corresponds to an overall 5% lower bound curve with respect to crack arrest. It was shown that the scatter of crack arrest toughness is essentially material independent and has a standard deviation of 18% and the temperature dependence of K Ia has the same form as predicted by the master curve for crack initiation toughness. The 'built in' offset between the mean 100 MPa√(m) crack arrest temperature, TK Ia , and RT NDT is 38 C (TK Ia =RT NDT +38 C) and the experimental relation between TK Ia and NDT is, TK Ia =NDT+28 C. The K IR -reference curve using NDT as reference temperature will be conservative with respect to the general 5% lower bound K Ia(5%) -curve, with a 75% confidence. The use of RT NDT , instead of NDT, will generally increase the degree of conservatism, both for non-irradiated as well as irradiated materials, close to a 95% confidence level. This trend is pronounced for materials with Charpy-V upper shelf energies below 100 J. It is shown that the K IR -curve effectively constitutes a deterministic lower bound curve for crack arrest. The findings are valid both for nuclear pressure vessel plates, forgings and welds. (orig.)

Conservatism of ASME KIR-reference curve with respect to crack arrest

International Nuclear Information System (INIS)

Wallin, K.; Rintamaa, R.; Nagel, G.

2001-01-01

The conservatism of the RT NDT temperature indexing parameter and the ASME K IR -reference curve with respect to crack arrest toughness, has been evaluated. Based on an analysis of the original ASME K Ia data, it was established that inherently, the ASME K IR -reference curve corresponds to an overall 5% lower bound curve with respect to crack arrest. It was shown that the scatter of crack arrest toughness is essentially material independent and has a standard deviation (S.D.) of 18% and the temperature dependence of K Ia has the same form as predicted by the master curve for crack initiation toughness. The 'built in' offset between the mean 100 MPa√m crack arrest temperature, TK Ia , and RT NDT is 38 deg. C (TK Ia =RT NDT +38 deg. C) and the experimental relation between TK Ia and NDT is, TK Ia =NDT+28 deg. C. The K IR -reference curve using NDT as reference temperature will be conservative with respect to the general 5% lower bound K Ia(5%) -curve, with a 75% confidence. The use of RT NDT , instead of NDT, will generally increase the degree of conservatism, both for non-irradiated as well as irradiated materials, close to a 95% confidence level. This trend is pronounced for materials with Charpy-V upper shelf energies below 100 J. It is shown that the K IR -curve effectively constitutes a deterministic lower bound curve for crack arrest The findings are valid both for nuclear pressure vessel plates, forgings and welds

The availability of irradiation data

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

Solar radiation at ground level is a necessary input for performances modeling and sizing of PV systems. This document reports on the needs for data and discusses the problems faced by users when accessing data. It then presents some technological solutions. Users generally need values of global daily or hourly irradiation with a spatial resolution of approximately 10 km. Relative errors (RMSE) of daily irradiation should be less than 20 %. Spatial coverage (continent) and temporal coverage are of importance. The data must be available conveniently at low cost. Several regional solar atlases have been made by interpolation of ground measurements, taking into account the local variation of climate. Satellite data produce irradiation maps offering a regular sampling in space and a wide geographical coverage. Time-series are also obtained by weather forecast models. Digital atlases have been created as integrated information system. These comprise a database and software to exploit it. The co-operative systems are connected with other servers that provide necessary weather data to compute solar radiation quantities. This survey of solar databases showed that in a general case, there is a discrepancy between users needs and available databases. This conclusion supports the efforts made in integrating information systems and co-operative systems to overcome the technical limits of measurements by using the information and communication technologies. (au)

Tensile properties of helium-injected V-15Cr-5Ti after irradiation in EBR-II

International Nuclear Information System (INIS)

Grossbeck, M.L.; Horak, J.A.

1985-01-01

Miniature specimens of V-15Cr-5Ti were prepared in the annealed condition and with 10, 20, and 30% cold work. The annealed specimens were cyclotron injected with helium and irradiated in sodium in EBR-II. The cold-worked specimens were irradiated in EBR-II but not helium injected. The specimens were irradiated at 400, 525, 625, and 700 0 C and received a fluence of 4.1 to 5.5 x 10 26 neutrons/m 2 (E > 0.1 meV). Tensile testing revealed very significant embrittlement as a result of the neutron irradiation but a much smaller change, mostly at 400 0 C, resulting from helium injection. 5 references, 9 figures, 2 tables

Irradiation probe and laboratory for irradiated material evaluation

International Nuclear Information System (INIS)

Smutny, S.; Kupca, L.; Beno, P.; Stubna, M.; Mrva, V.; Chmelo, P.

1975-09-01

The survey and assessment are given of the tasks carried out in the years 1971 to 1975 within the development of methods for structural materials irradiation and of a probe for the irradiation thereof in the A-1 reactor. The programme and implementation of laboratory tests of the irradiation probe are described. In the actual reactor irradiation, the pulse tube length between the pressure governor and the irradiation probe is approximately 20 m, the diameter is 2.2 mm. Temperature reaches 800 degC while the pressure control system operates at 20 degC. The laboratory tests (carried out at 20 degC) showed that the response time of the pressure control system to a stepwise pressure change in the irradiation probe from 0 to 22 at. is 0.5 s. Pressure changes were also studied in the irradiation probe and in the entire system resulting from temperature changes in the irradiation probe. Temperature distribution in the body of the irradiation probe heating furnace was determined. (B.S.)

Chapter 2: Irradiators

Energy Technology Data Exchange (ETDEWEB)

NONE

2018-04-01

The chapter 2 presents the subjects: 1) gamma irradiators which includes: Category-I gamma irradiators (self-contained); Category-II gamma irradiators (panoramic and dry storage); Category-III gamma irradiators (self-contained in water); Category-IV gamma irradiators (panoramic and wet storage); source rack for Category-IV gamma irradiators; product transport system for Category-IV gamma irradiators; radiation shield for gamma irradiators; 2) accelerators which includes: Category-I Accelerators (shielded irradiator); Category-II Accelerators (irradiator inside a shielded room); Irradiation application examples.

Extreme total solar irradiance due to cloud enhancement at sea level of the NE Atlantic coast of Brazil

Energy Technology Data Exchange (ETDEWEB)

Piacentini, Ruben D. [Instituto de Fisica Rosario (CONICET-Universidad Nacional de Rosario), 27 de Febrero 210bis, 2000 Rosario (Argentina); Facultad de Ciencias Exactas, Ingenieria y Agrimensura, Universidad Nacional de Rosario, Pellegrini 250, 2000 Rosario (Argentina); Salum, Graciela M. [Instituto de Fisica Rosario (CONICET-Universidad Nacional de Rosario), 27 de Febrero 210bis, 2000 Rosario (Argentina); Facultad Regional Concepcion del Uruguay, Universidad Tecnologica Nacional, Concepcion del Uruguay (Argentina); Fraidenraich, Naum; Tiba, Chigueru [Grupo de Pesquisas em Fontes Alternativas de Energia, Universidade Federal de Pernambuco, Av. Prof. Luiz Freire, 1000 - 50.740-540, Recife, PE (Brazil)

2011-01-15

Extraterrestrial total solar irradiance, usually called Solar Constant, is attenuated by the atmosphere in different proportions, depending mainly on solar zenith angle and altitude of the measurement point. In this work, it is presented very high and extreme horizontal plane measurements of global solar irradiance that in some days overpassed the Solar Constant corrected by the actual Sun-Earth distance (CSC). They were obtained at sea level of the intertropical Atlantic coast, in the city of Recife, Brazil, in the period February 2008-January 2009. Extreme total solar irradiance values larger than CSC were measured during 3.4% of the days of the total registered period. This percentage increases to 7.4% for global solar irradiance within 95.1-100% of the CSC and to 15.3% within 90.1-95% of the CSC. The largest extreme total solar irradiance value, 1477 {+-} 30 W/m{sup 2}, was registered the 28th of March 2008 at 11:34 local time (UT - 3h). It overpassed by 7.9% the CSC value for this day (1369.4 W/m{sup 2}) and by 42.3% the estimated value of the clear sky Iqbal C radiation model (1037.7 W/m{sup 2}). The observation of extreme values should be taken into account in the study of solar radiation effects related to materials exposed to the outside, UV index and biological effects, among others. Also, the detailed knowledge of this interesting effect may contribute significantly to clarify physical aspects about the interaction of global solar radiation with the ecosystem and climate change. (author)

The globalization of football: a study in the glocalization of the 'serious life'.

Science.gov (United States)

Giulianotti, Richard; Robertson, Roland

2004-12-01

Sport, in particular football, constitutes one of the most dynamic, sociologically illuminating domains of globalization. This paper examines the globalization of football with particular reference to Robertson's theorizations of global processes. We examine football's cultural globalization through the concept of 'glocalization', which highlights the interdependence of local and global processes within the game's identities and institutions. We address economic globalization in football by considering the world's leading clubs as 'glocal' transnational corporations. We assess the political globalization of football with reference to the possible enhancement of democracy within the game's international governance. We conclude by affirming the utility of sport in advancing our empirical and theoretical understanding of globalization processes.

Dismantling of Irradiation Facility Selfshielded of Investigation Model MPX- γ-25M

International Nuclear Information System (INIS)

Soguero, D.; Rapado, M.; Prieto, E.; Desdin, L.; Guerra, M.; Castillo, J.

2011-01-01

In this paper is described the dismantling a category I selfshielded gamma irradiation facility model MPX - γ - 25M. The following specific objectives were established: a) identify aspects of the insurance contract, human and technical resources b) assess the radiological situation of the process and c) analyze potential radiological extraordinary events in each step of the process, ensuring appropriate responses, based on an evaluation of process safety. The assessment of radiological events can serve as a reference for addressing the process of dismantling other similar irradiators. (Author)

Development and Establishment of Detection Method of Irradiated Foods

International Nuclear Information System (INIS)

Byun, Myung Woo; Lee, Ju Woon; Kim, Dong Ho; Jo, Cheo Run; Kim, Jang Ho; Kim, Kyong Su

2004-12-01

The present project was related to the development and establishment of the detection techniques for the safety management of gamma-irradiated food and particularly conducted for the establishment of standard detection method for gamma-irradiated dried spices and raw materials, dried meat and fish powder for processed foods, bean paste powder, red pepper paste powder, soy sauce powder, and starch for flavoring ingredients described in 3, 6, 7 section of Korean Food Standard. Since the approvement of gamma-irradiated food items will be enlarged due to the international tendency for gamma-irradiated food, it was concluded that the establishment of detailed detection methods for each food group is not efficient for the enactment and enforcement of related regulations. For this reason, in order to establish the standard detection method, a detection system for gamma-irradiated food suitable for domestic operation was studied using comparative analysis of domestic and foreign research data classified by items and methods and European Standard as a reference. According to the comparative analyses of domestic and foreign research data and regulations of detection for gamma-irradiated food, it was concluded to be desirable that the optimal detection method should be decided after principal detection tests such as physical, chemical, and biological detection methods are established as standard methods and that the specific descriptions such as pre-treatment of raw materials, test methods, and the evaluation of results should be separately prescribed

Development and Establishment of Detection Method of Irradiated Foods

Energy Technology Data Exchange (ETDEWEB)

Byun, Myung Woo; Lee, Ju Woon; Kim, Dong Ho; Jo, Cheo Run; Kim, Jang Ho; Kim, Kyong Su

2004-12-15

The present project was related to the development and establishment of the detection techniques for the safety management of gamma-irradiated food and particularly conducted for the establishment of standard detection method for gamma-irradiated dried spices and raw materials, dried meat and fish powder for processed foods, bean paste powder, red pepper paste powder, soy sauce powder, and starch for flavoring ingredients described in 3, 6, 7 section of Korean Food Standard. Since the approvement of gamma-irradiated food items will be enlarged due to the international tendency for gamma-irradiated food, it was concluded that the establishment of detailed detection methods for each food group is not efficient for the enactment and enforcement of related regulations. For this reason, in order to establish the standard detection method, a detection system for gamma-irradiated food suitable for domestic operation was studied using comparative analysis of domestic and foreign research data classified by items and methods and European Standard as a reference. According to the comparative analyses of domestic and foreign research data and regulations of detection for gamma-irradiated food, it was concluded to be desirable that the optimal detection method should be decided after principal detection tests such as physical, chemical, and biological detection methods are established as standard methods and that the specific descriptions such as pre-treatment of raw materials, test methods, and the evaluation of results should be separately prescribed.

Tritium release from neutron irradiated beryllium pebbles

Energy Technology Data Exchange (ETDEWEB)

Scaffidi-Argentina, F.; Werle, H. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Neutronenphysik und Reactortechnik

1998-01-01

One of the most important open issues related to beryllium for fusion applications refers to the kinetics of the tritium release as a function of neutron fluence and temperature. The EXOTIC-7 as well as the `Beryllium` experiments carried out in the HFR reactor in Petten are considered as the most detailed and significant tests for investigating the beryllium response under neutron irradiation. This paper reviews the present status of beryllium post-irradiation examinations performed at the Forschungszentrum Karlsruhe with samples from the above mentioned irradiation experiments, trying to elucidate the tritium release controlling processes. In agreement with previous studies it has been found that release starts at about 500-550degC and achieves a maximum at about 700-750degC. The observed release at about 500-550degC is probably due to tritium escaping from chemical traps, while the maximum release at about 700-750degC is due to tritium escaping from physical traps. The consequences of a direct contact between beryllium and ceramics during irradiation, causing tritium implanting in a surface layer of beryllium up to a depth of about 40 mm and leading to an additional inventory which is usually several times larger than the neutron-produced one, are also presented and the effects on the tritium release are discussed. (author)

Presentation of reports for licensing of industrial irradiators

International Nuclear Information System (INIS)

2000-04-01

This Regulation refers to the requirements of the Regulation CNEN-NE.6.02. 'Licensing of Radioactive Facilities', expressed in the section 6 related to the information for Previous Approval, in the subsection 7.2 related to the information for the Construction Licensing and in the subsection 9.2, related to the information for the Authorization for operation, for the specific case of industrial irradiators

Organizational Learning Supported by Reference Architecture Models

DEFF Research Database (Denmark)

Nardello, Marco; Møller, Charles; Gøtze, John

2017-01-01

of an emerging technical standard specific for the manufacturing industry. Global manufacturing experts consider the Reference Architecture Model Industry 4.0 (RAMI4.0) as one of the corner stones for the implementation of Industry 4.0. The instantiation contributed to organizational learning in the laboratory...

Radiation protection aspects in the metallurgical examination of irradiated fuel elements

International Nuclear Information System (INIS)

Janardhanan, S.; Pillai, P.M.B.; Jacob, John; Kutty, K.N.; Wattamwar, S.B.; Mehta, S.K.

1981-01-01

The operational safety requirements of hot cell facilities for metallurgical examination of irradiated natural and enriched uranium fuel elements are highlighted. The cell shielding is designed for handling activities equivalent of 10 2 to 10 5 curies of gamma energy of 1.3 Mev. A brief outline of the built-in design features relevant to safety assessment is also incorporated. Reference is made to some salient features of Radiometallurgy Cells at Trombay. Metallurgical operations include investigations on cladding failure of irradiated material structure and specimen preparation from hot fuel element. The radiation protection aspects presented in this paper show that handling low irradiated fuel elements in these beta-gamma cells do not cause serious operational safety problems. The procedures followed and the containment provided would adequately restrict exposure of operational staff to acceptable limits. (author)

Global solidarity, migration and global health inequity.

Science.gov (United States)

Eckenwiler, Lisa; Straehle, Christine; Chung, Ryoa

2012-09-01

The grounds for global solidarity have been theorized and conceptualized in recent years, and many have argued that we need a global concept of solidarity. But the question remains: what can motivate efforts of the international community and nation-states? Our focus is the grounding of solidarity with respect to global inequities in health. We explore what considerations could motivate acts of global solidarity in the specific context of health migration, and sketch briefly what form this kind of solidarity could take. First, we argue that the only plausible conceptualization of persons highlights their interdependence. We draw upon a conception of persons as 'ecological subjects' and from there illustrate what such a conception implies with the example of nurses migrating from low and middle-income countries to more affluent ones. Next, we address potential critics who might counter any such understanding of current international politics with a reference to real-politik and the insights of realist international political theory. We argue that national governments--while not always or even often motivated by moral reasons alone--may nevertheless be motivated to acts of global solidarity by prudential arguments. Solidarity then need not be, as many argue, a function of charitable inclination, or emergent from an acknowledgment of injustice suffered, but may in fact serve national and transnational interests. We conclude on a positive note: global solidarity may be conceptualized to helpfully address global health inequity, to the extent that personal and transnational interdependence are enough to motivate national governments into action. © 2012 Blackwell Publishing Ltd.

Food irradiation

International Nuclear Information System (INIS)

Sato, Tomotaro; Aoki, Shohei

1976-01-01

Definition and significance of food irradiation were described. The details of its development and present state were also described. The effect of the irradiation on Irish potatoes, onions, wiener sausages, kamaboko (boiled fish-paste), and mandarin oranges was evaluated; and healthiness of food irradiation was discussed. Studies of the irradiation equipment for Irish potatoes in a large-sized container, and the silo-typed irradiation equipment for rice and wheat were mentioned. Shihoro RI center in Hokkaido which was put to practical use for the irradiation of Irish potatoes was introduced. The state of permission of food irradiation in foreign countries in 1975 was introduced. As a view of the food irradiation in the future, its utilization for the prevention of epidemics due to imported foods was mentioned. (Serizawa, K.)

Exhaust gas treatment by electron beam irradiation

International Nuclear Information System (INIS)

Shibamura, Yokichi; Suda, Shoichi; Kobayashi, Toshiki

1991-01-01

Among global environmental problems, atmospheric pollution has been discussed since relatively old days, and various countermeasures have been taken, but recently in connection with acid rain, the efficient and economical treatment technology is demanded. As the denitration and desulfurization technology for the exhaust gas from the combustion of fossil fuel, the incineration of city trash and internal combustion engines, three is the treatment method by electron beam irradiation. By irradiating electron beam to exhaust gas, nitrogen oxides and sulfur oxides are oxidized to nitric acid and sulfuric acid, and by promoting the neutralization of these acids with injected alkali, harmless salts are recovered. This method has the merit that nitrogen oxides and surfur oxides can be removed efficiently with a single system. In this report, as for the exhaust gas treatment by electron beam irradiation, its principle, features, and the present status of research and development are described, and in particular, the research on the recent exhaust gas treatment in city trash incineration is introduced. This treatment method is a dry process, accordingly, waste water disposal is unnecessary. The reaction products are utilized as fertilizer, and waste is not produced. (K.I.)

Effect of irradiation on unscheduled DNA synthesis induced by 4-nitroquinoline in tracheal epithelium of rats

International Nuclear Information System (INIS)

Hahn, F.F.; Kennedy, R.; Brooks, A.L.

1986-01-01

Unscheduled DNA synthesis (UDS) was determined in rat epithelium by autoradiographic techniques to determine the influence of prior irradiation on the ability of the cells to repair mutagenic damage induced by 4-nitroquionoline (4NQO). UDS was stimulated by in vitro exposure to 4NPO. However, prior whole-body irradiation of rats with either 50 or 300 rad did not alter the UDS induced by 4NQO. The results of this study do not support the hypothesis that irradiation can induce DNA repair enzymes in respiratory tract epithelium. 5 references, 3 figures

The effect of gamma irradiation on physical and nutritional quality of Penaeus Monodon shrimps

International Nuclear Information System (INIS)

Lacroix, M.L.; Jobin, M.; Latreille, B.; Nouchpramool, K.; Gagnon, M.

1995-01-01

Two lots of frozen precooked shrimps from Thailand ''PENAEUS MONODON'' Black tiger variety were irradiated at 1.8 to 3.6 kGy. This way, it was hoped to compare the effects of gamma irradiation on the chemical and physical qualities of frozen precooked shrimps after transportation from Thailand to Canada. The results indicated that the color measurement expressed in terms of lightness (L*) showed a relative stability during storage of processed shrimps. However, based on the value (θ) a more intense red color was observed for the control and the reference. The cooked irradiated and nonirradiated shrimps presented a significant decrease (p ≤ 0.01) of 22% in firmness during the first week of storage. Thus, irradiation did not impair the firmness of shrimps after treatment or during storage. Also, based on the statistical analysis, the irradiation treatment did not affect the content of amino acids of precooked shrimps. (Author)

Experiencing Global Culture in Vatel

DEFF Research Database (Denmark)

Kampf, Constance Elizabeth; Broillet, Alexandra; John, Claudette

2015-01-01

To explore the meaning of “global culture” in a professional communication context, this paper explores the “unsettled” global culture of Vatel, a private business school educating students from nearly 50 different countries for the hospitality industry. This paper explores the role of knowledge...... management in understanding global culture, arguing that the notion of “unsettled” cultures demonstrates how ideologies function in global settings and draw on national “settled” cultural resources. In unpacking different aspects of Vatel's culture this paper questions assumptions built into cultural frames...... of reference by offering a global culture frame, drawing on cultural resources from country based “settled” cultural contexts, and reflects on how global cultural contexts can benefit from a knowledge management approach to this dynamic between “settled” cultural contexts and “unsettled” cultural ideologies...

A global reference model of Curie-point depths based on EMAG2

Science.gov (United States)

Li, Chun-Feng; Lu, Yu; Wang, Jian

2017-03-01

In this paper, we use a robust inversion algorithm, which we have tested in many regional studies, to obtain the first global model of Curie-point depth (GCDM) from magnetic anomaly inversion based on fractal magnetization. Statistically, the oceanic Curie depth mean is smaller than the continental one, but continental Curie depths are almost bimodal, showing shallow Curie points in some old cratons. Oceanic Curie depths show modifications by hydrothermal circulations in young oceanic lithosphere and thermal perturbations in old oceanic lithosphere. Oceanic Curie depths also show strong dependence on the spreading rate along active spreading centers. Curie depths and heat flow are correlated, following optimal theoretical curves of average thermal conductivities K = ~2.0 W(m°C)-1 for the ocean and K = ~2.5 W(m°C)-1 for the continent. The calculated heat flow from Curie depths and large-interval gridding of measured heat flow all indicate that the global heat flow average is about 70.0 mW/m2, leading to a global heat loss ranging from ~34.6 to 36.6 TW.

Chemical coloring on stainless steel by ultrasonic irradiation.

Science.gov (United States)

Cheng, Zuohui; Xue, Yongqiang; Ju, Hongbin

2018-01-01

To solve the problems of high temperature and non-uniformity of coloring on stainless steel, a new chemical coloring process, applying ultrasonic irradiation to the traditional chemical coloring process, was developed in this paper. The effects of ultrasonic frequency and power density (sound intensity) on chemical coloring on stainless steel were studied. The uniformity of morphology and colors was observed with the help of polarizing microscope and scanning electron microscopy (SEM), and the surface compositions were characterized by X-ray photoelectric spectroscopy (XPS), meanwhile, the wear resistance and the corrosion resistance were investigated, and the effect mechanism of ultrasonic irradiation on chemical coloring was discussed. These results show that in the process of chemical coloring on stainless steel by ultrasonic irradiation, the film composition is the same as the traditional chemical coloring, and this method can significantly enhance the uniformity, the wear and corrosion resistances of the color film and accelerate the coloring rate which makes the coloring temperature reduced to 40°C. The effects of ultrasonic irradiation on the chemical coloring can be attributed to the coloring rate accelerated and the coloring temperature reduced by thermal-effect, the uniformity of coloring film improved by dispersion-effect, and the wear and corrosion resistances of coloring film enhanced by cavitation-effect. Ultrasonic irradiation not only has an extensive application prospect for chemical coloring on stainless steel but also provides an valuable reference for other chemical coloring. Copyright © 2017 Elsevier B.V. All rights reserved.

Oxygenation and response to irradiation of organotypic multicellular spheroids of human glioma.

Science.gov (United States)

Sminia, Peter; Acker, Helmut; Eikesdal, Hans Petter; Kaaijk, Patricia; Enger, Per øvind; Slotman, Ben; Bjerkvig, Rolf

2003-01-01

Investigation of the oxygenation status of organotypic multicellular spheroids (OMS) and their response to irradiation. Tumour specimens of glioblastoma multiforme patients (n = 16) were initiated as OMS. Following 20 Gy gamma-irradiation, the cell migratory capacity was evaluated. Spheroid oxygenation was determined by micro-electrode pO2 measurements and pimonidazole immunostaining. Spheroids prepared from established human glioma cell lines were used as a reference. Irradiation inhibited spheroid outgrowth by 12 to 88% relative to the non-irradiated controls. A large interpatient variation was noticed. Oxygen measurements revealed a gradual decrease in pO2 level from the periphery to the core of the spheroids, but the pO2 values remained within an oxygenated range. However, in the cell line spheroids an intermediate layer of hypoxia surrounding the central core was observed. Cell line spheroids with a hypoxic cell fraction and well-oxygenated OMS both show high resistance to irradiation, indicating that hypoxia may not be the biological factor determining the radioresistance of glioma spheroids in vitro.

The application of irradiation to phyto sanitary problems

Energy Technology Data Exchange (ETDEWEB)

Ross, R T [USDA/APHIS/PPQ. Department of Agriculture, Room 1630 Soagribg, 1400 Independence Ave. Sw. Mail Code Stop 3438, 20250 Washington D.C. (United States)

1998-12-31

The first formally adopted regulatory policy for irradiation as a phyto sanitary treatment in the United States was issued in 1989 and was based on Title 7 of the Code of Federal Regulations. These regulations authorized irradiation as a quarantine treatment for papayas intended for movement from the State of Hawaii to the continental United States (U.S.), Guam, Puerto Rico, and the U.S. Virgin Islands. This authorization was specific for commodity, place of origin, and program, but was designed for a complex of three fruit flies rather than a single pest. Routine commercial shipments were never realized under this regulation due to the lack of a treatment facility in Hawaii. However, the authorization has proven useful from the standpoint of beginning to establish policies for irradiation as a phyto sanitary treatment in the United States. The United States Department of Agriculture (USDA), Animal and Plant Health Inspection Service (APHIS), Plant Protection and Quarantine (PPQ) remains dedicated to using the most up-to-date, appropriate and least intrusive technology to provide quarantine security. The need for alternative treatments for pests mitigation systems is greater than ever. Global trade pressures and the possible loss of methyl bromide make it imperative that all practical treatment options be explored. Since 1989 irradiation treatment concepts have matured significantly. Technological advances, greater experience, and an increasingly larger body of research indicate that irradiation has important potential as a treatment for quarantine pest problems. It is in this light that PPQ is expanding its regulatory framework, is addressing irradiation treatment options, and is developing comprehensive policy statements intended to facilitate the development and formalization of new treatments for phyto sanitary applications. (Author)

The application of irradiation to phyto sanitary problems

International Nuclear Information System (INIS)

Ross, R.T.

1997-01-01

The first formally adopted regulatory policy for irradiation as a phyto sanitary treatment in the United States was issued in 1989 and was based on Title 7 of the Code of Federal Regulations. These regulations authorized irradiation as a quarantine treatment for papayas intended for movement from the State of Hawaii to the continental United States (U.S.), Guam, Puerto Rico, and the U.S. Virgin Islands. This authorization was specific for commodity, place of origin, and program, but was designed for a complex of three fruit flies rather than a single pest. Routine commercial shipments were never realized under this regulation due to the lack of a treatment facility in Hawaii. However, the authorization has proven useful from the standpoint of beginning to establish policies for irradiation as a phyto sanitary treatment in the United States. The United States Department of Agriculture (USDA), Animal and Plant Health Inspection Service (APHIS), Plant Protection and Quarantine (PPQ) remains dedicated to using the most up-to-date, appropriate and least intrusive technology to provide quarantine security. The need for alternative treatments for pests mitigation systems is greater than ever. Global trade pressures and the possible loss of methyl bromide make it imperative that all practical treatment options be explored. Since 1989 irradiation treatment concepts have matured significantly. Technological advances, greater experience, and an increasingly larger body of research indicate that irradiation has important potential as a treatment for quarantine pest problems. It is in this light that PPQ is expanding its regulatory framework, is addressing irradiation treatment options, and is developing comprehensive policy statements intended to facilitate the development and formalization of new treatments for phyto sanitary applications. (Author)

The application of irradiation to phyto sanitary problems

Energy Technology Data Exchange (ETDEWEB)

Ross, R.T. [USDA/APHIS/PPQ. Department of Agriculture, Room 1630 Soagribg, 1400 Independence Ave. Sw. Mail Code Stop 3438, 20250 Washington D.C. (United States)

1997-12-31

The first formally adopted regulatory policy for irradiation as a phyto sanitary treatment in the United States was issued in 1989 and was based on Title 7 of the Code of Federal Regulations. These regulations authorized irradiation as a quarantine treatment for papayas intended for movement from the State of Hawaii to the continental United States (U.S.), Guam, Puerto Rico, and the U.S. Virgin Islands. This authorization was specific for commodity, place of origin, and program, but was designed for a complex of three fruit flies rather than a single pest. Routine commercial shipments were never realized under this regulation due to the lack of a treatment facility in Hawaii. However, the authorization has proven useful from the standpoint of beginning to establish policies for irradiation as a phyto sanitary treatment in the United States. The United States Department of Agriculture (USDA), Animal and Plant Health Inspection Service (APHIS), Plant Protection and Quarantine (PPQ) remains dedicated to using the most up-to-date, appropriate and least intrusive technology to provide quarantine security. The need for alternative treatments for pests mitigation systems is greater than ever. Global trade pressures and the possible loss of methyl bromide make it imperative that all practical treatment options be explored. Since 1989 irradiation treatment concepts have matured significantly. Technological advances, greater experience, and an increasingly larger body of research indicate that irradiation has important potential as a treatment for quarantine pest problems. It is in this light that PPQ is expanding its regulatory framework, is addressing irradiation treatment options, and is developing comprehensive policy statements intended to facilitate the development and formalization of new treatments for phyto sanitary applications. (Author)

Transfer of energy from irradiated crystals to redox reactions: iodide/bromate and nitrite/bromate systems

International Nuclear Information System (INIS)

Arnikar, H.J.; Madhava Rao, B.S.; Bedekar, M.J.

1978-01-01

Earlier it had been shown by the authors that some of the redox reactions, which do not take place at room temperature can be induced by γ radiation. The yields are proportional to the dose. Results reported here show that instead of direct irradiation, the energy stored in irradiated crystals in the form of F and hole centres can be available, in part, in effecting redox reactions. The mechanism of such an energy transfer is discussed with reference to reactions in the I - +BrO 3 - and NO 2 - +BrO 3 - systems due to the addition of irradiated NaCl. (author)

Irradiation performance of HTGR recycle fissile fuel

International Nuclear Information System (INIS)

Homan, F.J.; Long, E.L. Jr.

1976-08-01

The irradiation performance of candidate HTGR recycle fissile fuel under accelerated testing conditions is reviewed. Failure modes for coated-particle fuels are described, and the performance of candidate recycle fissile fuels is discussed in terms of these failure modes. The bases on which UO 2 and (Th,U)O 2 were rejected as candidate recycle fissile fuels are outlined, along with the bases on which the weak-acid resin (WAR)-derived fissile fuel was selected as the reference recycle kernel. Comparisons are made relative to the irradiation behavior of WAR-derived fuels of varying stoichiometry and conclusions are drawn about the optimum stoichiometry and the range of acceptable values. Plans for future testing in support of specification development, confirmation of the results of accelerated testing by real-time experiments, and improvement in fuel performance and reliability are described

Security Components of Globalization

Directory of Open Access Journals (Sweden)

Florin Iftode

2015-05-01

Full Text Available The objective of this paper is our intention to present what are the main connections between globalization and international security. In terms of global security we can perceive the globalization as a process by which global state is represented by the UN, with a single world system, represented by major security organizations and with global effects. We will present from the beginning the main theoretical aspects that define the phenomenon of globalization, and then our contribution in assessing the implications of this phenomenon on the regional and global security. The results of our research are materialized in the last part of the paper. They emphasize the personal assessments on how the phenomenon of globalization has direct effect on global security. When talking about government, we think of norms, rules and decisionmaking procedures in the management of international life. The value that we add to the new scientific interpretation of the definition of globalization is represented, primarily, by the valuable bibliographic used resources and the original approach on the concept that refers to the links between globalization and security. This article may be, at any time, a starting point in an interesting research direction in the field of global security.

Estimation of global solar radiation by means of sunshine duration

Energy Technology Data Exchange (ETDEWEB)

Luis, Mazorra Aguiar; Felipe, Diaz Reyes [Electrical Engineering Dept., Las Palmas de Gran Canaria Univ. (U.L.P.G.C.), Campus Univ. Tafira (Spain); Pilar, Navarro Rivero [Canary Islands Technological Inst. (I.T.C.), Gran Canaria (Spain)

2008-07-01

This paper analyses the relationship between global solar irradiation and sunshine duration with different estimation models for the island of Gran Canaria (Spain). These parameters were taken from six measurement stations around the Island, and selected for their reliability and the long period of time they covered. All data used in this paper were handed over by the Canary Islands Technological Institute (I.T.C.). As a first approach, it was decided to study the Angstrom lineal model. In order to improve the knowledge on solar resources, a Typical Meteorological Year (TMY) was created from all daily data. TMY shows differences between southern and northern locations, where Trade Winds generate clouds during the summer months. TMY resumes a data bank much longer than a year in duration, generating the characteristics for a year series of each location, for both irradiation and sunshine duration. To create the TMY, weighted means have been used to smooth high or low values. At first, Angstrom lineal model has been used to estimate solar global irradiation from sunshine duration values, using TMY. But the lineal model didn't reproduce satisfactory results when used to obtain global solar radiation from all daily sunshine duration data. For this reason, different models based in both parameters were used. The parameters estimation of this model was achieved both from TMY daily and monthly series and from all daily data for every location. Because of the weather stability all over the year in the Island, most of the daily data are concentrated in a close range, occasioning a deviation in the lineal equations. To avoid this deviation it was proposed to consider a limit condition data, taking into account values out of the main cloud of data. Additionally, different models were proposed (quadratic, cubic, logarithmic and exponential) to make a regression from all daily data. The best results were obtained with the exponential model proposed in this paper. The

Influence of different irradiation facilities on the response of radioprotection devices

International Nuclear Information System (INIS)

Heeren de Oliveira, A.

1984-05-01

An EIC 1 extrapolation chamber, flushed with a methan based tissue equivalent gas is presented. This measuring device serves as a reference instrument to calibrate in tissue absorbed dose beta beams from different irradiation facilities; point radioactive sources, sources used with beam flattening filters, large area sources simulated by moving a point source. The source to detector distance has to be greater than 3 cm, requiring a transfer dosemeter for smaller distances. Influence of these different irradiation geometries has been studied on several radioprotection instruments (babyline, individual dosemeter, ionisation chamber), using three radionucleides: 147 Pm, 204 Tl, 90 Sr + 90 Y [fr

Study of damages by neutron irradiation in lithium aluminates; Estudio de danos por irradiacion neutronica en aluminatos de litio

Energy Technology Data Exchange (ETDEWEB)

Palacios G, O

1999-06-01

Lithium aluminates proposed to the production of tritium in fusion nuclear reactors, due to the thermal stability that they present as well as the behavior of the aluminium to the irradiation. As a neutron flux with profile ({approx_equal} 14 Mev) of a fusion reactor is not available. A irradiation experiment was designed in order to know the micro and nano structure damages produced by fast and thermal neutrons in two irradiation positions of the fusion nuclear reactor Triga Mark III: CT (Thermal Column) and SIFCA (System of Irradiation Fixed of Capsules). In this work samples of lithium aluminate were characterized by XRD (X-Ray Diffraction), TEM (Transmission Electron Microscopy) and SEM (Scanning Electron Microscopy). Two samples were prepared by two methods: a) coalition method and b) peroxide method. This characterization comprised original and irradiated samples. The irradiated sample amounted to 4 in total: one for each preparation method and one for each irradiation position. The object of this analysis was to correlate with the received neutron dose the damages suffered by the samples with the neutron irradiation during long periods (440 H), in their micro and nano structure aspects; in order to understand the changes as a function of the irradiation zone (with thermal and fast neutron flux) and the preparation methods of the samples and having as an antecedent the irradiation in SIFCA position by short times (2h). The obtained results are referred to the stability of {gamma} -aluminate phase, under given conditions of irradiation and defined nano structure arrangement. They also refer to the proposals of growth mechanism and nucleation of new phases. The error associated with the measurement of neutron dose is also discussed. (Author)

The natural aging of austenitic stainless steels irradiated with fast neutrons

Science.gov (United States)

Rofman, O. V.; Maksimkin, O. P.; Tsay, K. V.; Koyanbayev, Ye. T.; Short, M. P.

2018-02-01

Much of today's research in nuclear materials relies heavily on archived, historical specimens, as neutron irradiation facilities become ever more scarce. These materials are subject to many processes of stress- and irradiation-induced microstructural evolution, including those during and after irradiation. The latter of these, referring to specimens "naturally aged" in ambient laboratory conditions, receives far less attention. The long and slow set of rare defect migration and interaction events during natural aging can significantly change material properties over decadal timescales. This paper presents the results of natural aging carried out over 15 years on austenitic stainless steels from a BN-350 fast breeder reactor, each with its own irradiation, stress state, and natural aging history. Natural aging is shown to significantly reduce hardness in these steels by 10-25% and partially alleviate stress-induced hardening over this timescale, showing that materials evolve back towards equilibrium even at such a low temperature. The results in this study have significant implications to any nuclear materials research program which uses historical specimens from previous irradiations, challenging the commonly held assumption that materials "on the shelf" do not evolve.

Analysis on the post-irradiation examination of the HANARO miniplate-1 irradiation test for Kijang research reactor

Energy Technology Data Exchange (ETDEWEB)

Park, Jong Man; Tahk, Young Wook; Jeong, Yong Jin [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); and others

2017-08-15

The construction project of the Kijang research reactor (KJRR), which is the second research reactor in Korea, has been launched. The KJRR was designed to use, for the first time, U–Mo fuel. Plate-type U–7 wt.% Mo/Al–5 wt.% Si, referred to as U–7Mo/Al–5Si, dispersion fuel with a uranium loading of 8.0 gU/cm{sup 3}, was selected to achieve higher fuel efficiency and performance than are possible when using U{sub 3}Si{sub 2}/Al dispersion fuel. To qualify the U–Mo fuel in terms of plate geometry, the first miniplates [HANARO Miniplate (HAMP-1)], containing U–7Mo/Al–5Si dispersion fuel (8 gU/cm{sup 3}), were fabricated at the Korea Atomic Energy Research Institute and recently irradiated at HANARO. The PIE (Post-irradiation Examination) results of the HAMP-1 irradiation test were analyzed in depth in order to verify the safe in-pile performance of the U–7Mo/Al–5Si dispersion fuel under the KJRR irradiation conditions. Nondestructive analyses included visual inspection, gamma spectrometric mapping, and two-dimensional measurements of the plate thickness and oxide thickness. Destructive PIE work was also carried out, focusing on characterization of the microstructural behavior using optical microscopy and scanning electron microscopy. Electron probe microanalysis was also used to measure the elemental concentrations in the interaction layer formed between the U–Mo kernels and the matrix. A blistering threshold test and a bending test were performed on the irradiated HAMP-1 miniplates that were saved from the destructive tests. Swelling evaluation of the U–Mo fuel was also conducted using two methods: plate thickness measurement and meat thickness measurement.

Analysis on the post-irradiation examination of the HANARO miniplate-1 irradiation test for kijang research reactor

Directory of Open Access Journals (Sweden)

Jong Man Park

2017-08-01

Full Text Available The construction project of the Kijang research reactor (KJRR, which is the second research reactor in Korea, has been launched. The KJRR was designed to use, for the first time, U–Mo fuel. Plate-type U–7 wt.% Mo/Al–5 wt.% Si, referred to as U–7Mo/Al–5Si, dispersion fuel with a uranium loading of 8.0 gU/cm3, was selected to achieve higher fuel efficiency and performance than are possible when using U3Si2/Al dispersion fuel. To qualify the U–Mo fuel in terms of plate geometry, the first miniplates [HANARO Miniplate (HAMP-1], containing U–7Mo/Al–5Si dispersion fuel (8 gU/cm3, were fabricated at the Korea Atomic Energy Research Institute and recently irradiated at HANARO. The PIE (Post-irradiation Examination results of the HAMP-1 irradiation test were analyzed in depth in order to verify the safe in-pile performance of the U–7Mo/Al–5Si dispersion fuel under the KJRR irradiation conditions. Nondestructive analyses included visual inspection, gamma spectrometric mapping, and two-dimensional measurements of the plate thickness and oxide thickness. Destructive PIE work was also carried out, focusing on characterization of the microstructural behavior using optical microscopy and scanning electron microscopy. Electron probe microanalysis was also used to measure the elemental concentrations in the interaction layer formed between the U–Mo kernels and the matrix. A blistering threshold test and a bending test were performed on the irradiated HAMP-1 miniplates that were saved from the destructive tests. Swelling evaluation of the U–Mo fuel was also conducted using two methods: plate thickness measurement and meat thickness measurement.

Food irradiation

International Nuclear Information System (INIS)

Lindqvist, H.

1996-01-01

This paper is a review of food irradiation and lists plants for food irradiation in the world. Possible applications for irradiation are discussed, and changes induced in food from radiation, nutritional as well as organoleptic, are reviewed. Possible toxicological risks with irradiated food and risks from alternative methods for treatment are also brought up. Ways to analyze weather food has been irradiated or not are presented. 8 refs

Overall properties of the Gaia DR1 reference frame

Science.gov (United States)

Liu, N.; Zhu, Z.; Liu, J.-C.; Ding, C.-Y.

2017-03-01

Aims: The first Gaia data release (Gaia DR1) provides 2191 ICRF2 sources with their positions in the auxiliary quasar solution and five astrometric parameters - positions, parallaxes, and proper motions - for stars in common between the Tycho-2 catalogue and Gaia in the joint Tycho-Gaia astrometric solution (TGAS). We aim to analyze the overall properties of Gaia DR1 reference frame. Methods: We compare quasar positions of the auxiliary quasar solution with ICRF2 sources using different samples and evaluate the influence on the Gaia DR1 reference frame owing to the Galactic aberration effect over the J2000.0-J2015.0 period. Then we estimate the global rotation between TGAS with Tycho-2 proper motion systems to investigate the property of the Gaia DR1 reference frame. Finally, the Galactic kinematics analysis using the K-M giant proper motions is performed to understand the property of Gaia DR1 reference frame. Results: The positional comparison between the auxiliary quasar solution and ICRF2 shows negligible orientation and validates the declination bias of -0.1mas in Gaia quasar positions with respect to ICRF2. Galactic aberration effect is thought to cause an offset 0.01mas of the Z axis direction of Gaia DR1 reference frame. The global rotation between TGAS and Tycho-2 proper motion systems, obtained by different samples, shows a much smaller value than the claimed value 0.24mas yr-1. For the Galactic kinematics analysis of the TGAS K-M giants, we find possible non-zero Galactic rotation components beyond the classical Oort constants: the rigid part ωYG = -0.38±0.15mas yr-1 and the differential part ω^primeYG = -0.29±0.19mas yr-1 around the YG axis of Galactic coordinates, which indicates possible residual rotation in Gaia DR1 reference frame or problems in the current Galactic kinematical model. Conclusions: The Gaia DR1 reference frame is well aligned to ICRF2, and the possible influence of the Galactic aberration effect should be taken into consideration

Classification and prediction of gamma-irradiation of ten commercial herbs and spices by multivariate evaluation of properties of their extracts

International Nuclear Information System (INIS)

Polovka, M.; Suhaj, M.

2013-01-01

Antioxidant activity, dry matter content, extractability, total phenolic compounds content and CIE L*a*b* colour characteristics of methanolic extracts of 10 spices exposed to γ-irradiation doses from 0 kGy (reference) to 30 kGy were evaluated in different time intervals after the irradiation by means of UV-VIS spectrophotometry in order to assess the influence of γ-irradiation and post-irradiation storage on spices quality. Experimental data revealed that γ-irradiation itself did not cause so dramatic changes as the subsequent post-irradiation storage, or, that the changes were, at least, comparable. Multivariate statistical methods (factor analysis, canonical discriminant analysis and kth-nearest neighbour classification) facilitated differentiation of irradiated spices from the corresponding references and γ-radiation dose prediction on the basis of processing of experimentally determined characteristics of their extracts. In case of samples exposed to 0 kGy, 10 kGy and 30 kGy, differentiation and classification correctness higher than 85% was reached. In case of 0 kGy and 30 kGy samples differentiation, for 8 spices absolutely correct recognition was achieved and, for remaining 2 spices, still sufficient recognition correctness of 75% and 92.8%, respectively, was achieved. By the statistical models used, more than 90% correctness of dose prediction was achieved in the majority of cases. (author)

Global Reproduction and Transformation of Science Education

Science.gov (United States)

Tobin, Kenneth

2011-01-01

Neoliberalism has spread globally and operates hegemonically in many fields, including science education. I use historical auto/ethnography to examine global referents that have mediated the production of contemporary science education to explore how the roles of teachers and learners are related to macrostructures such as neoliberalism and…

Optimizing UV Index determination from broadband irradiances

Science.gov (United States)

Tereszchuk, Keith A.; Rochon, Yves J.; McLinden, Chris A.; Vaillancourt, Paul A.

2018-03-01

A study was undertaken to improve upon the prognosticative capability of Environment and Climate Change Canada's (ECCC) UV Index forecast model. An aspect of that work, and the topic of this communication, was to investigate the use of the four UV broadband surface irradiance fields generated by ECCC's Global Environmental Multiscale (GEM) numerical prediction model to determine the UV Index. The basis of the investigation involves the creation of a suite of routines which employ high-spectral-resolution radiative transfer code developed to calculate UV Index fields from GEM forecasts. These routines employ a modified version of the Cloud-J v7.4 radiative transfer model, which integrates GEM output to produce high-spectral-resolution surface irradiance fields. The output generated using the high-resolution radiative transfer code served to verify and calibrate GEM broadband surface irradiances under clear-sky conditions and their use in providing the UV Index. A subsequent comparison of irradiances and UV Index under cloudy conditions was also performed. Linear correlation agreement of surface irradiances from the two models for each of the two higher UV bands covering 310.70-330.0 and 330.03-400.00 nm is typically greater than 95 % for clear-sky conditions with associated root-mean-square relative errors of 6.4 and 4.0 %. However, underestimations of clear-sky GEM irradiances were found on the order of ˜ 30-50 % for the 294.12-310.70 nm band and by a factor of ˜ 30 for the 280.11-294.12 nm band. This underestimation can be significant for UV Index determination but would not impact weather forecasting. Corresponding empirical adjustments were applied to the broadband irradiances now giving a correlation coefficient of unity. From these, a least-squares fitting was derived for the calculation of the UV Index. The resultant differences in UV indices from the high-spectral-resolution irradiances and the resultant GEM broadband irradiances are typically within 0

Proposal and Evaluation of Subordinate Standard Solar Irradiance Spectra for Applications in Solar Energy Systems

Energy Technology Data Exchange (ETDEWEB)

Habte, Aron M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jessen, Wilko [German Aerospace Center (DLR); Wilbert, Stefan [German Aerospace Center (DLR); Gueymard, Christian A. [Solar Consulting Services; Polo, Jesus [CIEMAT; Bian, Zeqiang [China Meteorological Administration; Driesse, Anton [Photovoltaic Performance Labs; Marzo, Aitor [University of Antofagasta; Armstrong, Peter [Masdar Institute of Science & Technology; Vignola, Frank [University of Oregon; Ramirez, Lourdes [CIEMAT

2018-04-01

Reference solar irradiance spectra are needed to specify key parameters of solar technologies such as photovoltaic cell efficiency, in a comparable way. The IEC 60904-3 and ASTM G173 standards present such spectra for Direct Normal Irradiance (DNI) and Global Tilted Irradiance (GTI) on a 37 degrees tilted sun-facing surface for one set of clear-sky conditions with an air mass of 1.5 and low aerosol content. The IEC/G173 standard spectra are the widely accepted references for these purposes. Hence, the authors support the future replacement of the outdated ISO 9845 spectra with the IEC spectra within the ongoing update of this ISO standard. The use of a single reference spectrum per component of irradiance is important for clarity when comparing and rating solar devices such as PV cells. However, at some locations the average spectra can differ strongly from those defined in the IEC/G173 standards due to widely different atmospheric conditions and collector tilt angles. Therefore, additional subordinate standard spectra for other atmospheric conditions and tilt angles are of interest for a rough comparison of product performance under representative field conditions, in addition to using the main standard spectrum for product certification under standard test conditions. This simplifies the product selection for solar power systems when a fully-detailed performance analysis is not feasible (e.g. small installations). Also, the effort for a detailed yield analyses can be reduced by decreasing the number of initial product options. After appropriate testing, this contribution suggests a number of additional spectra related to eight sets of atmospheric conditions and tilt angles that are currently considered within ASTM and ISO working groups. The additional spectra, called subordinate standard spectra, are motivated by significant spectral mismatches compared to the IEC/G173 spectra (up to 6.5%, for PV at 37 degrees tilt and 10-15% for CPV). These mismatches

Proof of Concept of an Irradiance Estimation System for Reconfigurable Photovoltaic Arrays

Directory of Open Access Journals (Sweden)

Vincenzo Li Vigni

2015-06-01

Full Text Available In order to reduce the mismatch effect caused by non-uniform shadows in PV arrays, reconfigurable interconnections approaches have been recently proposed in the literature. These systems usually require the knowledge of the solar radiation affecting every solar module. The aim of this work is to evaluate the effectiveness of three irradiance estimation approaches in order to define which can be well suited for reconfigurable PV arrays. It is presented a real-time solar irradiance estimation device (IrradEst, implementing the three different estimation methods. The proposed system is based on mathematical models of PV modules enabling to estimate irradiation values by sensing a combination of temperature, voltage and current of a PV module. Experimental results showed generally good agreement between the estimated irradiances and the measurements performed by a standard pyranometer taken as reference. Finally one of the three methods was selected as possible solution for a reconfigurable PV system.

Gamma irradiation and heat treatment for sterilization of Mushroom Spent Compost (MSC)

International Nuclear Information System (INIS)

Rosnani Abdul Rashid; Hassan Hamdani Mutaat; Foziah Ali; Zainab Harun; Hoe, P.C.K.; Mohd Meswan Maskom; Khairuddin Abdul Rahim

2016-01-01

Mushroom spent compost (MSC) refers to substrate residue from mushroom cultivation. MSC can be used as a material to improve soil properties for farming. MSC is also suitable as a carrier or substrate to hold beneficial microorganisms in bio fertilizer products. The carrier for bio fertilizer products must be sterilized completely before inoculating with bacteria inoculum. In this study, the effects of gamma irradiation and heat on sterilization of MSC were evaluated by microbial enumeration technique. The MSC was packed into polyethylene bags. The packed MSC were irradiated at different doses of 0 (control), 10, 20, 30, 40, 50 kGy, and heat sterilized at different autoclaving time of 0 (control), 15, 30, 45 and 60 minutes, separately. The irradiated and autoclaved samples were enumerated for viable colonies. The results showed that MSC was completely sterilized by gamma irradiation at the dose of 30 kGy whilst sterilization by heat required 30 minute autoclaving time. (author)

Effects of irradiation and fumigation on the antioxidative properties of some spices

Energy Technology Data Exchange (ETDEWEB)

Kuruppu, D P; Schmidt, K; Farkas, J; Langerak, D I; Duren, M D.A. van

1985-12-01

The effects of gamma irradiation (5.6 kGy) and ethylene oxide fumigation on the antioxidative activity of marjoram, nutmeg, paprika and black pepper were investigated. Sunflower oil in water emulsion (1:1), dark, at 30 deg C, lard, dark, at 40 deg C, lard, illuminated, at 50 deg C, and lard, dark, at 50 deg C were the substrates utilized for the investigation. Oxidation of the substrates in the presence of 0.2% (by weight) of spices were followed by the determination of peroxide value (PO) and free fatty acid value (FFA). No significant effect of irradiation on the antioxidant activities of spices was revealed. Fumigated marjoram tended to be less antioxidative in lard kept in dark storage at 60 deg C than the non-treated or irradiated spice. Marjoram and nutmeg lost their antioxidant properties in the presence of light. This loss, however, was not influenced by the irradiation or fumigation treatments. 13 references, 4 figures, 5 tables.

Global Analysis of Nonlinear Dynamics

CERN Document Server

Luo, Albert

2012-01-01

Global Analysis of Nonlinear Dynamics collects chapters on recent developments in global analysis of non-linear dynamical systems with a particular emphasis on cell mapping methods developed by Professor C.S. Hsu of the University of California, Berkeley. This collection of contributions prepared by a diverse group of internationally recognized researchers is intended to stimulate interests in global analysis of complex and high-dimensional nonlinear dynamical systems, whose global properties are largely unexplored at this time. This book also: Presents recent developments in global analysis of non-linear dynamical systems Provides in-depth considerations and extensions of cell mapping methods Adopts an inclusive style accessible to non-specialists and graduate students Global Analysis of Nonlinear Dynamics is an ideal reference for the community of nonlinear dynamics in different disciplines including engineering, applied mathematics, meteorology, life science, computational science, and medicine.  

GLOBALIZATION AND ECONOMICAL-SOCIAL INFLUENCES

Directory of Open Access Journals (Sweden)

LIVIU RADU

2011-04-01

Full Text Available Globalization represents a myriad of processes of undeniable complexity and variable dynamics, which cover various society areas. It can depict various aspects of phenomenon, ideology, strategy, or all in one place. Globalization is with no doubt a complex concept that bears diverse significations which refer to many sides: the economical, the political, the cultural one etc. Most authors view as particularly important the economic side of globalization, while they seem to be looking over the political, social or cultural aspects of this phenomenon. Thus the optimists view contemporary globalization as a new phase in which all the world’s states are subjected to sanctions from the global market, while skeptics argue that the globalization phenomenon determines chain reactions, incontrollable here and there, in conditions of a present crisis, precisely through the interdependency between states.

Reference hydrologic networks I. The status and potential future directions of national reference hydrologic networks for detecting trends

Science.gov (United States)

Whitfield, Paul H.; Burn, Donald H.; Hannaford, Jamie; Higgins, Hélène; Hodgkins, Glenn A.; Marsh, Terry; Looser, Ulrich

2012-01-01

Identifying climate-driven trends in river flows on a global basis is hampered by a lack of long, quality time series data for rivers with relatively undisturbed regimes. This is a global problem compounded by the lack of support for essential long-term monitoring. Experience demonstrates that, with clear strategic objectives, and the support of sponsoring organizations, reference hydrologic networks can constitute an exceptionally valuable data source to effectively identify, quantify and interpret hydrological change—the speed and magnitude of which is expected to a be a primary driver of water management and flood alleviation strategies through the future—and for additional applications. Reference hydrologic networks have been developed in many countries in the past few decades. These collections of streamflow gauging stations, that are maintained and operated with the intention of observing how the hydrology of watersheds responds to variations in climate, are described. The status of networks under development is summarized. We suggest a plan of actions to make more effective use of this collection of networks.

National Construction of Global Education: A Critical Review of the National Curriculum Standards for South Korean Global High Schools

Science.gov (United States)

Sung, Youl-Kwan; Park, Minjeong; Choi, Il-Seon

2013-01-01

In this paper, the authors investigate what global visions of education are reflected in the selected national curriculum standards, with special reference to two seemingly contradictory forces: globalization and nationalism. This paper examines the socio-economic and cultural foundations of the curriculum and explains how the national curriculum…

Dose-response relationships for chromosome aberrations in peripheral blood lymphocytes after whole- and partial-body irradiations. Pt. 1

International Nuclear Information System (INIS)

Liniecki, J.; Bajerska, A.; Wyszynska, K.

1983-01-01

Dose-response relationships were established for yield of dicentrics and for a fraction of damaged metaphases in lymphocytes after γ-irradiation of rabbits' whole blood in vitro. These relationships were based on the scoring of cells only in their first post-stimulation division and they served as a reference system for comparison with results of 60 Co γ-irradiation in vivo, either of the whole or of predetermined parts of an animal's body. There was a statistically acceptable agreement between dose-response data established for dicentric yield after whole-body irradiation in vivo and the reference dose-response curve derived from exposure of rabbit's blood in vitro. For partial-body (1/2) irradiations there was a satisfactory agreement between the dose-response curves in vitro for dicentric yield and fraction of metaphases damaged on the one hand and the response in vivo when the latter was related to mean doses to circulating blood. However, there was a drastic disagreement with the dose responses in vitro when measured cytogenetic quantities were plotted versus mean doses to body mass. When the latter were substituted for by comparable doses to circulating blood the in vivo-in vitro agreement was acceptable after irradiation. (orig.)

Radiation protection aspects in the metallurgical examination of irradiated fuel elements

Energy Technology Data Exchange (ETDEWEB)

Janardhanan, S.; Pillai, P.M.B.; Jacob, J.; Kutty, K.N.; Wattamwar, S.B.; Mehta, S.K. (Bhabha Atomic Research Centre, Bombay (India). Health Physics Div.)

The operational safety requirements of hot cell facilities for metallurgical examination of irradiated natural and enriched uranium fuel elements are highlighted. The cell shielding is designed for handling activities equivalent of 10/sup 2/ to 10/sup 5/ curies of gamma energy of 1.3 Mev. A brief outline of the built-in design features relevant to safety assessment is also incorporated. Reference is made to some salient features of Radiometallurgy Cells at Trombay. Metallurgical operations include investigations on cladding failure of irradiated material structure and specimen preparation from hot fuel element. The radiation protection aspects presented in this paper show that handling low irradiated fuel elements in these beta-gamma cells do not cause serious operational safety problems. The procedures followed and the containment provided would adequately restrict exposure of operational staff to acceptable limits.

A simple formula for determining globally clear skies

Energy Technology Data Exchange (ETDEWEB)

Long, C.N.; George, A.T.; Mace, G.G. [Penn State Univ., University Park, PA (United States)] [and others

1996-04-01

Surface measurements to serve as {open_quotes}ground truth{close_quotes} are of primary importance in the development of retrieval algorithms using satellite measurements to predict surface irradiance. The most basic algorithms of this type deal with clear sky (i.e., cloudless) top-to-surface shortwave (SW) transfer, serving as a necessary prerequisite towards treating both clear and cloudy conditions. Recently, atmosphere SW cloud forcing to infer the possibility of excess atmospheric absorption (compared with model results) in cloudy atmospheres. The surface component of this ratio relies on inferring the expected clear sky SW irradiance to determine the effects of clouds on the SW energy budget. Solar renewable energy applications make use of clear and cloud fraction climatologies to assess solar radiation resources. All of the above depend to some extent on the identification of globally clear sky conditions and the attendant measurements of downwelling SW irradiance.

Food irradiation

International Nuclear Information System (INIS)

Soothill, R.

1987-01-01

The issue of food irradiation has become important in Australia and overseas. This article discusses the results of the Australian Consumers' Association's (ACA) Inquiry into food irradiation, commissioned by the Federal Government. Issues discussed include: what is food irradiation; why irradiate food; how much food is consumer rights; and national regulations

Current status of the EPR method to detect irradiated food

International Nuclear Information System (INIS)

Desrosiers, M.F.

1996-01-01

This review gives a brief outline of the principles of the EPR detection method for irradiated foods by food type. For each food type, the scope, limitations and status of the method are given. The extensive reference list aims to include all which define the method, as well as some rarely cited works of historical importance. (author)

Worldwide status of food irradiation and the role of IAEA and other international organizations

International Nuclear Information System (INIS)

Loaharanu, P.

1988-01-01

While there has been an increasing interest in introducing irradiation for preservation and decontamination of food by national authorities and food industry, this technology has generated wide public debate in view of its perceived association with nuclear technology. The purpose of this paper is twofold: (1) to provide objectivity to the application of irradiation for food processing and (2) to project future trends of this technology. Irradiation appears to offer the most viable alternative to the existing technologies in quarantine treatment, hygienic quality of foods, reduction of food losses, and increase in market demand for fresh foods. Current limitations of food irradiation are discussed in terms of technical aspects, infrastructure and economics, consumer concerns, and harmonization of national regulations. Commercial applications have been reported in 19 countries. It is estimated that the total production of irradiated foods world-wide amounted to approximately 500,000 tons per annum. To ensure an effective implementation of the technology on a global basis, FAO and WHO have collaborated closely with the IAEA. An International Consultative Group on Food Irradiation was established under the aegis of FAO, IAEA, and WHO in May 1984. These organizations play an important role in training, technology transfer, developing guidelines on specific applications of food irradiation, international register of food irradiation facilities, acceptance and international trade in irradiated foods, and public information. (Namekawa, K.)

Worldwide status of food irradiation and the role of IAEA and other international organizations

Energy Technology Data Exchange (ETDEWEB)

Loaharanu, P.

1988-04-01

While there has been an increasing interest in introducing irradiation for preservation and decontamination of food by national authorities and food industry, this technology has generated wide public debate in view of its perceived association with nuclear technology. The purpose of this paper is twofold: (1) to provide objectivity to the application of irradiation for food processing and (2) to project future trends of this technology. Irradiation appears to offer the most viable alternative to the existing technologies in quarantine treatment, hygienic quality of foods, reduction of food losses, and increase in market demand for fresh foods. Current limitations of food irradiation are discussed in terms of technical aspects, infrastructure and economics, consumer concerns, and harmonization of national regulations. Commercial applications have been reported in 19 countries. It is estimated that the total production of irradiated foods world-wide amounted to approximately 500,000 tons per annum. To ensure an effective implementation of the technology on a global basis, FAO and WHO have collaborated closely with the IAEA. An International Consultative Group on Food Irradiation was established under the aegis of FAO, IAEA, and WHO in May 1984. These organizations play an important role in training, technology transfer, developing guidelines on specific applications of food irradiation, international register of food irradiation facilities, acceptance and international trade in irradiated foods, and public information. (Namekawa, K.).

Evaluation of irradiation hardening of proton irradiated stainless steels by nanoindentation