An Undergraduate Mechatronics Project Class at Philadelphia University, Jordan: Methodology and Experience

Science.gov (United States)

Tutunji, T. A.; Saleem, A.; Rabbo, S. A.

2009-01-01

Mechatronics is a branch of engineering whose final product should involve mechanical movements controlled by smart electronics. The design and implementation of functional prototypes are an essential learning experience for the students in this field. In this paper, the guidelines for a successful mechatronics project class are presented,…

The Low Temperature Microgravity Physics Experiments Project

Science.gov (United States)

Holmes, Warren; Lai, Anthony; Croonquist, Arvid; Chui, Talso; Eraker, J. H.; Abbott, Randy; Mills, Gary; Mohl, James; Craig, James; Balachandra, Balu;

Concurrent non-deferred reference counting on the Microgrid: first experiences

NARCIS (Netherlands)

Herhut, S.; Joslin, C.; Scholz, S.-B.; Poss, R.; Grelck, C.

2011-01-01

We present a first evaluation of our novel approach for non- deferred reference counting on the Microgrid many-core architecture. Non-deferred reference counting is a fundamental building block of im- plicit heap management of functional array languages in general and Sin- gle Assignment C in

Fire and Gas Detection in the LHC Experiments The Sniffer Project

CERN Document Server

Nunes, R W

2001-01-01

The LHC experiments, due to their complexity and size, present many safety challenges. Cryogenic gases are used in large quantities as well as certain flammable mixtures. The electrical power involved calls for analysis of the fire risks. Access is restricted to the minimum and environmental conditions are extremely harsh, due to strong magnetic fields and ionising radiation. This paper will describe the Combined Fire/Gas/Oxygen deficiency Detection systems proposed for inside the ATLAS and CMS Experiments and possibly for the two others, if they deem it necessary. The requirements of the experiments and the development and implementation of such a system will be discussed. In parallel, commercial procedures to implement these systems by industry shall be described, taking into consideration that a previous development has already been undertaken by CERN for the LEP experiments. The stage is set for inter-divisional collaboration in a project of utmost importance for the safety of people and protection of the...

Developing an approach to effectively use super ensemble experiments for the projection of hydrological extremes under climate change

Science.gov (United States)

Watanabe, S.; Kim, H.; Utsumi, N.

2017-12-01

This study aims to develop a new approach which projects hydrology under climate change using super ensemble experiments. The use of multiple ensemble is essential for the estimation of extreme, which is a major issue in the impact assessment of climate change. Hence, the super ensemble experiments are recently conducted by some research programs. While it is necessary to use multiple ensemble, the multiple calculations of hydrological simulation for each output of ensemble simulations needs considerable calculation costs. To effectively use the super ensemble experiments, we adopt a strategy to use runoff projected by climate models directly. The general approach of hydrological projection is to conduct hydrological model simulations which include land-surface and river routing process using atmospheric boundary conditions projected by climate models as inputs. This study, on the other hand, simulates only river routing model using runoff projected by climate models. In general, the climate model output is systematically biased so that a preprocessing which corrects such bias is necessary for impact assessments. Various bias correction methods have been proposed, but, to the best of our knowledge, no method has proposed for variables other than surface meteorology. Here, we newly propose a method for utilizing the projected future runoff directly. The developed method estimates and corrects the bias based on the pseudo-observation which is a result of retrospective offline simulation. We show an application of this approach to the super ensemble experiments conducted under the program of Half a degree Additional warming, Prognosis and Projected Impacts (HAPPI). More than 400 ensemble experiments from multiple climate models are available. The results of the validation using historical simulations by HAPPI indicates that the output of this approach can effectively reproduce retrospective runoff variability. Likewise, the bias of runoff from super ensemble climate

The CGEM-IT of the BESIII experiment: project update and test results in magnetic field

Science.gov (United States)

Mezzadri, G.

2016-08-01

The BESIII experiment is a multi-purpose detector operating on the electron- positron collider BEPCII in Beijing. Since 2008, the world's largest sample of J/ψ, ψ’ were collected. Due to increasing luminosity, the inner drift chamber is showing signs of aging. In 2014, an upgrade was proposed by the Italian collaboration based on the Cylindrical Gas Electron Multipliers (CGEM) technology, developed within the KLOE-II experiment, but with several new features and innovations. In this contribution, an overview of the project will be presented. Preliminary results of a beam test will be shown, with particular focus on the detector performance in magnetic field, with different configurations of electric field. A new readout mode, the µTPC readout, will also be described. The project has been recognized as a Significant Research Project within the Executive Programme for Scientific and Technological Cooperation between Italy and P.R.C for the years 2013-2015, and more recently has been selected as one of the project funded by the European Commission within the call H2020- MSCA-RISE-2014.

Evaluation of the Relational Competence Project 2012-16

DEFF Research Database (Denmark)

Nielsen, Birgitte Lund

2017-01-01

The relational competence project was initiated by a broad group of stakeholders, referring to both research and to concrete experiences of a need for development in schools and teacher education. The evaluation of the project has been based on a retrospective survey with answers and reflections......, and the same was new insight into the importance of relations and the concrete tools and approaches tried with students in schools. Some of the challenges emphasised was about the so-called “inner exercises”. It seems that systematic enactments with these exercises was perceived as extremely beneficial...... the project aspects to frame their inquiries for the final bachelor-project. Those students have experienced the highest level of professional outcomes. Relational competence has in their bachelor-inquiries been used in a very wide range of pedagogical and subject matter contexts, emphasizing relational...

Approach to Issues in Planning and Operation of Railway BOT Projects

Institute of Scientific and Technical Information of China (English)

Zhao Xianghong; Chen Min

2009-01-01

As an internationally popular mode of public infrastructures' investment,construction and operation,BOT (build-operate-transfer) has been successfully applied in some countries and regions of the world for their infrastructures' construction and playing an important role in promoting the construction of public infrastructures.The Ministry of Railways clearly proposed in its Suggestions for Implementation of Encouraging,Supporting and Guiding Participation of Non-public-owned Economy in Railway Construction and Operation that it was necessary to study and take for reference multiple modes of public infrastructures'investment,construction and operation including BOT.It is more complicated and risky for the process of planning and operation of BOT projects.The paper takes for reference the domestic and foreign experiences in the operation of BOT projects,analyzes the issues that will arise such as risk control in implementing railway BOT projects,employment of professional consultants,financing coordination,tariff making,non-commercial subsidy,as well as operation and management,and puts forward corresponding suggestions for these issues.

Low and intermediate level waste in SFR-1. Reference waste inventory

International Nuclear Information System (INIS)

Riggare, P.; Johansson, Claes

2001-06-01

The objective with this report is to describe all the waste and the waste package that is expected to be deposited in SFR-1 at the time of closure. This report is a part of the SAFE project (Safety Assessment of Final Repository for Radioactive Operational Waste), i.e. the renewed safety assessment of SFR-1. The accounted waste inventory has been used as input to the release calculation that has been performed in the SAFE project. The waste inventory is based on an estimated operational lifetime of the Swedish nuclear power plants of 40 years and that closure of the SFR repository will happen in 2030. In the report, data about geometries, weights, materials, chemicals and radionuclide are given. No chemo toxic material has been identified in the waste. The inventory is based on so called waste types and the waste types reference waste package. The reference waste package combined with a prognosis of the number of waste packages to the year 2030 gives the final waste inventory for SFR-1. All reference waste packages are thoroughly described in the appendices of this report. The reference waste packages are as far as possible based on actual experiences and measurements. The radionuclide inventory is also based on actual measurements. The inventory is based on measurements of 60 Co and 137 Cs in waste packages and on measurements 239 Pu and 240 Pu in reactor water. Other nuclides in the inventory are calculated with correlation factors. In the SAFE project's prerequisites it was said that one realistic and one conservative (pessimistic) inventory should be produced. The conservative one should then be used for the release calculations. In this report one realistic and one conservative radionuclide inventory is presented. The conservative one adds up to 10 16 Bq. Regarding materials there is only one inventory given since it is not certain what is a conservative assumption

The cost of model reference adaptive control - Analysis, experiments, and optimization

Science.gov (United States)

Messer, R. S.; Haftka, R. T.; Cudney, H. H.

1993-01-01

In this paper the performance of Model Reference Adaptive Control (MRAC) is studied in numerical simulations and verified experimentally with the objective of understanding how differences between the plant and the reference model affect the control effort. MRAC is applied analytically and experimentally to a single degree of freedom system and analytically to a MIMO system with controlled differences between the model and the plant. It is shown that the control effort is sensitive to differences between the plant and the reference model. The effects of increased damping in the reference model are considered, and it is shown that requiring the controller to provide increased damping actually decreases the required control effort when differences between the plant and reference model exist. This result is useful because one of the first attempts to counteract the increased control effort due to differences between the plant and reference model might be to require less damping, however, this would actually increase the control effort. Optimization of weighting matrices is shown to help reduce the increase in required control effort. However, it was found that eventually the optimization resulted in a design that required an extremely high sampling rate for successful realization.

Study on the setting of Reference Chinese man

International Nuclear Information System (INIS)

Wang Jixian; Chen Rusong

1998-01-01

The procedures for internal and external dose estimation, the calculation of authorized limits and derived reference levels, and the development of phantoms in the field of radiation protection are based on values for the ICRP Reference Man. Many differences exist between Asians, Europeans and North Americans with respect to race, customs and the pattern of food consumption. The neglect of these differences in the parameters used may lead to errors in dose assessment and health effect prognosis. research described in this paper was conducted to obtain reference values for the Chinese population or other Asian countries which might have major demographic contribution of Chinese. Based on the agreements reached in the Project Formulation Meeting ''Compilation of Anatomical, Physiological and Metabolic Characteristics for a Reference Asian Man'', the measurement of physique, organ mass and the food consumption were given the first priority for the first phase of the project. (author)

Managing the Cost Overrun Risks of Hydroelectric Dams: An Application of Reference Class Forecasting Techniques

OpenAIRE

Omotola Awojobi; Glenn P. Jenkins

2015-01-01

Hydropower investments have been subject to intense criticism over environmental issues and the common experience with cost uncertainty. In this study we address the issue of uncertainty in cost projections by applying reference class forecasting (RCF) in order to improve the reliability of costs used for making decisions under uncertainty. This technique makes it possible to closely link contingency estimates to the likely incidence of uncertainty of construction costs for hydroelectric dams...

Reference models supporting enterprise networks and virtual enterprises

DEFF Research Database (Denmark)

Tølle, Martin; Bernus, Peter

2003-01-01

This article analyses different types of reference models applicable to support the set up and (re)configuration of Virtual Enterprises (VEs). Reference models are models capturing concepts common to VEs aiming to convert the task of setting up of VE into a configuration task, and hence reducing...... the time needed for VE creation. The reference models are analysed through a mapping onto the Virtual Enterprise Reference Architecture (VERA) based upon GERAM and created in the IMS GLOBEMEN project....

KiloPower Project - KRUSTY Experiment Nuclear Design

Energy Technology Data Exchange (ETDEWEB)

Poston, David Irvin [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Godfroy, Thomas [NASA Marshall Space Flight Center (MSFC), Huntsville, AL (United States); Mcclure, Patrick Ray [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sanchez, Rene Gerardo [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-07-20

This PowerPoint presentation covers the following topics: Reference Kilopower configuration; Reference KRUSTY configuration; KRUSTY design sensitivities; KRUSTY reactivity coefficients; KRUSTY criticality safety and control; KRUSTY core activation/dose; and KRUSTY shielding, room activation/dose.

Different regulatory strategies in regulation of nuclear power projects: An Indian experience

International Nuclear Information System (INIS)

Khan, Sohail Ahmad

2002-01-01

Regulatory strategy needed for management of safety and safety culture involves careful planning and use of engineering concepts keeping in mind feasibility to implement certain safety requirements. It also requires adequate attention on working environment and mental conditions of designers, operating and maintenance staff and regulators. Different strategies followed during safety review and regulatory inspection of nuclear power projects for improving status of safety management and safety cultures have given certain results. The present paper brings out certain experience gained during regulation of Indian Nuclear Power Projects by Atomic Energy Regulatory Board of India in the area of management of safety and safety culture. (author)

The 10 bar hydrogen time projection chamber of the MuCap experiment

Energy Technology Data Exchange (ETDEWEB)

Egger, Johny [Paul Scherrer Institute, Olga/019, CH - 5232 Villigen PSI (Switzerland); Hildebrandt, Malte, E-mail: malte.hildebrandt@psi.c [Paul Scherrer Institute, Olga/019, CH - 5232 Villigen PSI (Switzerland); Petitjean, Claude [Paul Scherrer Institute, Olga/019, CH - 5232 Villigen PSI (Switzerland)

2011-02-01

The experimental goal of the MuCap experiment at the Paul Scherrer Institute (PSI) is a high-precision measurement of the singlet capture rate of the nuclear muon capture on the free proton in the reaction {mu}{sup -}+p{yields}n+{nu}{sub {mu}.} The measuring principle is a lifetime measurement whereas the experimental approach is based on a specially developed Time Projection Chamber (TPC) operating with ultra-pure and deuterium-depleted hydrogen gas at a pressure of 10 bar. The TPC acts as an active muon stop detector and the 10 bar hydrogen operates as target and detector. Design, construction and operation of the Time Projection Chamber are presented.

Optimizing integrated reference cases in the OCTAVIUS project

NARCIS (Netherlands)

Kvamsdal, H.M.; Ehlers, S.; Kather, A.; Khakharia, P.M.; Nienoord, M.; Fosbøl, P.L.

2016-01-01

Adding a carbon capture plant to a power plant reduces the efficiency of said power plant. In order to keep this drop in efficiency as small as possible, several optimisation studies are performed in the OCTAVIUS project. Based on the work of the European Benchmarking Task Force-EBTF within the

TRAILER Project Overview. Tagging, Recognition and Acknowledgment of Informal Learning ExpeRiences

NARCIS (Netherlands)

García-Peñalvo, Francisco J.; Zangrando, Valentina; García Holgado, Alicia; Conde González, Miguel Ángel; Seoane Pardo, Antonio; Alier Forment, Marc; Janssen, José; Griffiths, Dai; Mykowska, Aleksandra; Ribeiro Alves, Gustavo; Minovic, Miroslav

2012-01-01

García-Peñalvo, F. J., Zangrando, V., García Holgado, A., Conde González, M. Á., Seoane Pardo, A. M., Alier Forment, M., Janssen, J., et al. (2012). TRAILER Project Overview. Tagging, Recognition and Acknowledgment of Informal Learning ExpeRiences. In F. J. García, L. Vicent, M. Ribó, A. Climent, J.

Subcriticality calculations for the FFTF reverse approach to critical experiment

International Nuclear Information System (INIS)

Selby, D.L.; Flanagan, G.F.

1975-01-01

The reverse approach to critical (RAC) experiments were performed in the ZPR-IX critical facility at Argonne National Laboratory. One of the major objectives of this project is to determine the adequacy of the low-level flux monitor (LLFM) detectors for initial loading of the Fast Flux Test Facility (FFTF). 5 references

Patient participation in ERS guidelines and research projects: the EMBARC experience.

Science.gov (United States)

Chalmers, James D; Timothy, Alan; Polverino, Eva; Almagro, Marta; Ruddy, Thomas; Powell, Pippa; Boyd, Jeanette

2017-09-01

The European Multicentre Bronchiectasis Audit and Research Collaboration (EMBARC) is a European Respiratory Society (ERS) Clinical Research Collaboration dedicated to improving research and clinical care for people with bronchiectasis. EMBARC has created a European Bronchiectasis Registry, funded by the ERS and by the European Union (EU) Innovative Medicines Initiative Programme. From the outset, EMBARC had the ambition to be a patient-focussed project. In contrast to many respiratory diseases, however, there are no specific patient charities or European patient organisations for patients with bronchiectasis and no existing infrastructure for patient engagement. This article describes the experience of EMBARC and the European Lung Foundation in establishing a patient advisory group and then engaging this group in European guidelines, an international registry and a series of research studies. Patient involvement in research, clinical guidelines and educational activities is increasingly advocated and increasingly important. Genuine patient engagement can achieve a number of goals that are critical to the success of an EU project, including focussing activities on patient priorities, allowing patients to direct the clinical and research agenda, and dissemination of guidelines and research findings to patients and the general public. Here, we review lessons learned and provide guidance for future ERS task forces, EU-funded projects or clinical research collaborations that are considering patient involvement. To understand the different ways in which patients can contribute to clinical guidelines, research projects and educational activities.To understand the barriers and potential solutions to these barriers from a physician's perspective, in order to ensure meaningful patient involvement in clinical projects.To understand the barriers and potential solutions from a patient's perspective, in order to meaningfully involve patients in clinical projects.

Recent references

International Nuclear Information System (INIS)

Ramavataram, S.

1991-01-01

In support of a continuing program of systematic evaluation of nuclear structure data, the National Nuclear Data Center maintains a complete computer file of references to the nuclear physics literature. Each reference is tagged by a keyword string, which indicates the kinds of data contained in the article. This master file of Nuclear Structure References (NSR) contains complete keyword indexes to literature published since 1969, with partial indexing of older references. Any reader who finds errors in the keyword descriptions is urged to report them to the National Nuclear Data Center so that the master NSR file can be corrected. In 1966, the first collection of Recent References was published as a separate issue of Nuclear Data Sheets. Every four months since 1970, a similar indexed bibliography to new nuclear experiments has been prepared from additions to the NSR file and published. Beginning in 1978, Recent References was cumulated annually, with the third issue completely superseding the two issues previously published during a given year. Due to publication policy changes, cumulation of Recent Reference was discontinued in 1986. The volume and issue number of all the cumulative issues published to date are given. NNDC will continue to respond to individual requests for special bibliographies on nuclear physics topics, in addition to those easily obtained from Recent References. If the required information is available from the keyword string, a reference list can be prepared automatically from the computer files. This service can be provided on request, in exchange for the timely communication of new nuclear physics results (e.g., preprints). A current copy of the NSR file may also be obtained in a standard format on magnetic tape from NNDC. Requests for special searches of the NSR file may also be directed to the National Nuclear Data Center

Experiences From NASA/Langley's DMSS Project

Science.gov (United States)

1996-01-01

There is a trend in institutions with high performance computing and data management requirements to explore mass storage systems with peripherals directly attached to a high speed network. The Distributed Mass Storage System (DMSS) Project at the NASA Langley Research Center (LaRC) has placed such a system into production use. This paper will present the experiences, both good and bad, we have had with this system since putting it into production usage. The system is comprised of: 1) National Storage Laboratory (NSL)/UniTree 2.1, 2) IBM 9570 HIPPI attached disk arrays (both RAID 3 and RAID 5), 3) IBM RS6000 server, 4) HIPPI/IPI3 third party transfers between the disk array systems and the supercomputer clients, a CRAY Y-MP and a CRAY 2, 5) a "warm spare" file server, 6) transition software to convert from CRAY's Data Migration Facility (DMF) based system to DMSS, 7) an NSC PS32 HIPPI switch, and 8) a STK 4490 robotic library accessed from the IBM RS6000 block mux interface. This paper will cover: the performance of the DMSS in the following areas: file transfer rates, migration and recall, and file manipulation (listing, deleting, etc.); the appropriateness of a workstation class of file server for NSL/UniTree with LaRC's present storage requirements in mind the role of the third party transfers between the supercomputers and the DMSS disk array systems in DMSS; a detailed comparison (both in performance and functionality) between the DMF and DMSS systems LaRC's enhancements to the NSL/UniTree system administration environment the mechanism for DMSS to provide file server redundancy the statistics on the availability of DMSS the design and experiences with the locally developed transparent transition software which allowed us to make over 1.5 million DMF files available to NSL/UniTree with minimal system outage

Engaging the public in hydrological observations - first experiences from the CrowdWater project

Science.gov (United States)

Seibert, Jan; Strobl, Barbara; Etter, Simon; Vis, Marc; Ewen, Tracy; (Ilja) van Meerveld, H. J.

2017-04-01

The project CrowdWater (www.crowdwater.ch) explores opportunities for citizen scientists in hydrological observations. For data collection in CrowdWater, we use a "geocaching" type approach with the help of a smartphone app. Citizens can participate in the collection of hydrological data using the smartphone app, which allows both the submission of observations for existing sites and to set up new sites. A crucial challenge in any citizen science project is finding ways to connect to enough people who want to participate and to keep them motivation to contribute to the project. Here, we present the approaches that will be used in the CrowdWater project and discuss our first experiences. To connect to the public and recruit participants we use publications in traditional media, social media and a MOOC (massive open online course). In order to keep participant motivated the collected data is immediately shown in the app and online and gamification elements are used in the app.

Cl@ssi 2.0: experience in Emilia Romagna

Directory of Open Access Journals (Sweden)

Elena Pacetti

2013-06-01

Full Text Available This article presents some of the results of the Ministerial Initiative Cl@ssi 2.0 in the Emilia Romagna Region. Having described the reference field in which the scaffolding action of the research group of the University of Bologna, coordinated by Prof. Luigi Guerra, is positioned, the paper presents the coaching model through which the design and documentation of the teaching practices adopted in schools was supported. Analysing the experiences of the ER classes, we have identified eight project themes, subsequently modelled on two levels: the didactic modelling of the experiences (construction of interpretation hypotheses; and the construction of a themes/models map (checking/adapting the hypotheses, experimentation through which each school was able to describe and publish processes, products, etc. which characterised their specific project experience. The paper concludes with a series of general reflections on the three years' work.

An experimental study on the self-reference effect

Institute of Scientific and Technical Information of China (English)

ZHU; Ying(朱滢); ZHANG; Li(张力)

2002-01-01

Self-reference at encoding increases the probability of recollective experience in recognition memory. Self-reference effect (SRE) in memory is observed when the degree of self-refer- ence of to-be-remembered materials is varied. Usually items encoded in terms of self-reference are associated with significantly higher recall performance relative to items encoded in other ways, including semantic encoding. In our three experiments, four orientating tasks formed four levels in a between-subjects design. The conditions were rating personality traits with reference to self, mother, Lu Xun (a famous Chinese writer) or rating the traits on a negative-positive dimension. In a recognition test, subjects first identified old items and then indicated which of these were accompanied by recollective experience ('remember' responses) and which were recognized on some other basis ('know' responses). Our results showed that both the self-reference condition and mother condition were associated with the same highest proportion of correct remember responses and the same lowest proportion of correct know responses. In contrast, for Western subjects, the self-reference condition, relative to the mother condition, was associated with a higher proportion of correct remember responses and a lower proportion of correct know responses. We discussed the results with reference to the HERA model (hemispheric encoding/retrieval asymmetry).

Topography of the complete corticopontine projection: From experiments to principal maps

Directory of Open Access Journals (Sweden)

Trygve B Leergaard

2007-10-01

Full Text Available The mammalian brain is characterized by orderly spatial distribution of its cellular components, commonly referred to as topographical organization. The topography of cortical and subcortical maps is thought to represent functional or computational properties. In the present investigation, we have studied map transformations and organizing principles in the projections from the cerebral cortex to the pontine nuclei, with emphasis on the mapping of the cortex as a whole onto the pontine nuclei. Following single or multiple axonal tracer injections into different cortical regions, three-dimensional (3-D distributions of anterogradely labeled axons in the pontine nuclei were mapped. All 3-D reconstructed data sets were normalized to a standardized local coordinate system for the pontine nuclei and uploaded in a database application (FACCS, Functional Anatomy of the Cerebro-Cerebellar System, available via The Rodent Brain Workbench, http://www.rbwb.org. The database application allowed flexible use of the data in novel combinations, and use of a previously published data sets. Visualization of different combinations of data was used to explore alternative principles of organization. As a result of these analyses, a principal map of the topography of corticopontine projections was developed. This map followed the organization of early spatiotemporal gradients present in the cerebral cortex and the pontine nuclei. With the principal map for corticopontine projections, a fairly accurate prediction of pontine target area can be made for any site of origin in the cerebral cortex. The map and the underlying shared data sets represent a basis for modeling of topographical organization and structure-function relationships in this system.

Experiences of unemployed clients with services offered them by the front office of the Bridge project

OpenAIRE

Twum, Sampson

2010-01-01

The purpose of this study was to examine the experiences of unemployed clients of the Bridge project to the services offered them by the front office. The Bridge project organises programs to ease immigrant’s integration. The project also aid immigrant’s integration with supervision, information and education through front office activity. This study used a qualitative research approach and the method of data collection was in-depth interviews. The participants were selected using snow b...

Teledermatology: an experience in Tucuman

International Nuclear Information System (INIS)

Rotger, V I; Olivera, J M; Solarz, P F; Ruiz, L M; Salas, A; García Mena, M C

2011-01-01

Since 2006 projects have been carried out in the Universidad Nacional de Tucuman to introduce Telemedicine in the Provincial System of Health (SIPROSA) in Tucuman, Argentina. These projects aim at improving accessibility to remote populations, providing equity and avoiding costly and unnecessary transfers as well as helping early diagnosis and treatments, timely and appropriate referrals. On the other hand, this consultation has already been set up within the SIPROSA with the application of the system of reference and counter-reference for several years. By applying Telemedicine it is possible to accelerate the times and make this more efficient. This paper presents a prototype Web application for performing consultation in dermatology. These were conducted by professionals in Ranchillos, a small town within the Province, together with specialists from the capital city. After the experience, it can be said that the teledermatological application of the platform has been well received by physicians and dermatologists of rural areas, especially because the interfaces could be adjusted to their requirements. The physicians consider it a useful tool to complete the process of referral and counter-referral.

Mission requirements for a manned earth observatory. Task 2: Reference mission definition and analyiss, volume 2

Science.gov (United States)

1973-01-01

The mission requirements and conceptual design of manned earth observatory payloads for the 1980 time period are discussed. Projections of 1980 sensor technology and user data requirements were used to formulate typical basic criteria pertaining to experiments, sensor complements, and reference missions. The subjects discussed are: (1) mission selection and prioritization, (2) baseline mission analysis, (3) earth observation data handling and contingency plans, and (4) analysis of low cost mission definition and rationale.

Nuclear Structure References (NSR) file

International Nuclear Information System (INIS)

Ewbank, W.B.

1978-08-01

The use of the Nuclear Structure References file by the Nuclear Data Project at ORNL is described. Much of the report concerns format information of interest only to those preparing input to the system or otherwise needing detailed knowledge of its internal structure. 17 figures

PROJECT EXPERIENCE REPORT DEMOLITION OF HANFORDS 233-S PLUTONIUM CONCENTRATION FACILITY

International Nuclear Information System (INIS)

BERLIN, G.T.; ORGILL, T.K.

2004-01-01

This report provides a summary of the preparation, operations, innovative work practices, and lessons learned associated with demolition of the 2334 Plutonium Concentration Facility. This project represented the first open-air demolition of a highly-contaminated plutonium facility at the Hanford Site. This project may also represent the first plutonium facility in the US. Department of Energy (DOE) complex to have been demolished without first decontaminating surfaces to near ''free release'' standards. Demolition of plutonium contaminated structures, if not properly managed, can subject cleanup personnel and the environment to significant risk. However, with proper sequencing and innovative use of commercially available equipment, materials, and services, this project demonstrated that a plutonium processing facility can be demolished while avoiding the need to perform extensive decontamination or to construct large enclosures. This project utilized an excavator with concrete shears, diamond circular saws, water misting and fogging equipment, commercially available fixatives and dust suppressants, conventional mobile crane and rigging services, and near real-time modeling of meteorological and radiological conditions. Following a significant amount of preparation, actual demolition of the 233-S Facility began in October 2003 and was completed in late April 2004. The knowledge and experience gained on this project are important to the Hanford Site as additional plutonium processing facilities are scheduled for demolition in the near future. Other sites throughout the DOE Complex may also be faced with similar challenges. Numerous innovations and effective work practices were implemented on this project. Accordingly, a series of ''Lessons Learned and Innovative Practices Fact Sheets'' were developed and are included as an appendix to this report. This collection of fact sheets is not intended to capture every innovative work practice and lesson learned, but rather

PROJECT EXPERIENCE REPORT DEMOLITION OF HANFORDS 233-S PLUTONIUM CONCENTRATION FACILITY

International Nuclear Information System (INIS)

BERLIN, G.T.

2004-01-01

This report provides a summary of the preparation, operations, innovative work practices, and lessons learned associated with demolition of the 2334 Plutonium Concentration Facility. This project represented the first open-air demolition of a highly-contaminated plutonium facility at the Hanford Site. This project may also represent the first plutonium facility in the US. Department of Energy (DOE) complex to have been demolished without first decontaminating surfaces to near ''free release'' standards. Demolition of plutonium contaminated structures, if not properly managed, can subject cleanup personnel and the environment to significant risk. However, with proper sequencing and innovative use of commercially available equipment, materials, and services, this project demonstrated that a plutonium processing facility can be demolished while avoiding the need to perform extensive decontamination or to construct large enclosures. This project utilized an excavator with concrete shears, diamond circular saws, water misting and fogging equipment, commercially available fixatives and dust suppressants, conventional mobile crane and rigging services, and near real-time modeling of meteorological and radiological conditions. Following a significant amount of preparation, actual demolition of the 2333 Facility began in October 2003 and was completed in late April 2004. The knowledge and experience gained on this project are important to the Hanford Site as additional plutonium processing facilities are scheduled for demolition in the near future. Other sites throughout the DOE Complex may also be faced with similar challenges. Numerous innovations and effective work practices were implemented on this project. Accordingly, a series of ''Lessons Learned and Innovative Practices Fact Sheets'' were developed and are included as an appendix to this report. This collection of fact sheets is not intended to capture every innovative work practice and lesson learned, but rather to

A Fuzzy Comprehensive Evaluation Model for Sustainability Risk Evaluation of PPP Projects

Directory of Open Access Journals (Sweden)

Libiao Bai

2017-10-01

Full Text Available Evaluating the sustainability risk level of public–private partnership (PPP projects can reduce project risk incidents and achieve the sustainable development of the organization. However, the existing studies about PPP projects risk management mainly focus on exploring the impact of financial and revenue risks but ignore the sustainability risks, causing the concept of “sustainability” to be missing while evaluating the risk level of PPP projects. To evaluate the sustainability risk level and achieve the most important objective of providing a reference for the public and private sectors when making decisions on PPP project management, this paper constructs a factor system of sustainability risk of PPP projects based on an extensive literature review and develops a mathematical model based on the methods of fuzzy comprehensive evaluation model (FCEM and failure mode, effects and criticality analysis (FMECA for evaluating the sustainability risk level of PPP projects. In addition, this paper conducts computational experiment based on a questionnaire survey to verify the effectiveness and feasibility of this proposed model. The results suggest that this model is reasonable for evaluating the sustainability risk level of PPP projects. To our knowledge, this paper is the first study to evaluate the sustainability risk of PPP projects, which would not only enrich the theories of project risk management, but also serve as a reference for the public and private sectors for the sustainable planning and development. Keywords: sustainability risk eva

Electrical engineering a pocket reference

CERN Document Server

Schmidt-Walter, Heinz

2007-01-01

This essential reference offers you a well-organized resource for accessing the basic electrical engineering knowledge you need for your work. Whether you're an experienced engineer who appreciates an occasional refresher in key areas, or a student preparing to enter the field, Electrical Engineering: A Pocket Reference provides quick and easy access to fundamental principles and their applications. You also find an extensive collection of time-saving equations that help simplify your daily projects.Supported with more than 500 diagrams and figures, 60 tables, and an extensive index, this uniq

Phototropism experiments in microgravity-the Seedling Growth project in the EMCS on the ISS

Science.gov (United States)

Kiss, John; Edelmann, Richard; Herranz, Raul; Medina, Francisco Javier; Millar, Katherine

The microgravity environment aboard orbiting spacecraft has provided a unique laboratory to explore important topics in basic plant biology. Our group has utilized the European Modular Cultivation System (EMCS) aboard the International Space Station (ISS) to study plant growth, development, tropisms, and gene expression in a series of spaceflight experiments. The most current project performed on the ISS was termed Seeding Growth-1 (SG-1) which builds on the previous TROPI (for tropisms) experiments. TROPI-1 was the first EMCS experiment, and we discovered a novel red-light-based phototropism in hypocotyls of seedlings grown in microgravity (Millar et al. 2010). In TROPI-2, our experiments were extended to reduced gravity levels and found that 0.1-0.3 g can attenuate the red-light response (Kiss et al. 2012). In addition, we performed gene profiling studies and noted that approximately 280 genes that were differentially regulated at least two-fold in the space samples compared to the ground controls (Correll et al. 2013). Major technical and operational changes in SG-1 (launched in March 2013) compared to the TROPI experiments include: improvements in lighting conditions within the EMCS to optimize the environment for phototropism studies and the use of infrared illumination to provide high-quality images of the seedlings. In SG-1, the red-light-based phototropism in roots and hypocotyls of seedlings that was noted in TROPI-2 was confirmed and now can be more precisely characterized based on the improvements in procedures. As we move forward, the SG-2 experiments (to be launched in 2014), in addition to a continued focus on phototropism, will consider the cell cycle as well as the growth and proliferation of plant cells in microgravity (Matía et al. 2010). Furthermore, the lessons learned from sequential experiments from TROPI-1 to TROPI-2 to SG-1 can provide insights to other researchers developing space experiments in plant biology. References: Correll M.J., T

Study on operation I and C DCS test method of EPR project

International Nuclear Information System (INIS)

Meng Ying; Lv Zhihong; Huang Xinnian; Fan Haiying; Li Zhuojia; Xiao Shushu

2014-01-01

Through summarization and optimization of the method for operation I and C DCS test of the European pressurized reactor project, the conclusions play a guiding role on the operation I and C DCS test of the domestic advanced nuclear power plant. The study of the method focuses on the test platform, the test process and the optimization of method of operation I and C DCS test with the practical experience. The reasonable and reliable test method for operation I and C DCS test of the European pressurized reactor project is worthy of the reference and the development in the project of the domestic advanced nuclear power plant. (authors)

Project planning and project management of Baseball II-T

International Nuclear Information System (INIS)

Kozman, T.A.; Chargin, A.K.

1975-01-01

The details of the project planning and project management work done on the Baseball II-T experiment are reviewed. The LLL Baseball program is a plasma confinement experiment accomplished with a superconducting magnet in the shape of a baseball seam. Both project planning and project management made use of the Critical Path Management (CPM) computer code. The computer code, input, and results from the project planning and project management runs, and the cost and effectiveness of this method of systems planning are discussed

Nuclear power. Volume 2. Nuclear power project management

International Nuclear Information System (INIS)

Pedersen, E.S.

1978-01-01

NUCLEAR POWER PLANT DESIGN is intended to be used as a working reference book for management, engineers and designers, and as a graduate-level text for engineering students. The book is designed to combine theory with practical nuclear power engineering and design experience, and to give the reader an up-to-date view of the status of nuclear power and a basic understanding of how nuclear power plants function. Volume 2 contains the following chapters: (1) review of nuclear power plants; (2) licensing procedures; (3) safety analysis; (4) project professional services; (5) quality assurance and project organization; (6) construction, scheduling, and operation; (7) nuclear fuel handling and fuel management; (8) plant cost management; and (9) conclusion

Preservation of Records, Knowledge and Memory Across Generations. Reference Bibliography within the NEA RK and M Project

International Nuclear Information System (INIS)

2016-01-01

This bibliography aims at providing an overview over the work performed in the field of the preservation of records, knowledge and memory in relation with radioactive waste management, especially disposal. For each entry, an abstract outlining the relevance of the document to the topic of RKM is provided. The following criteria are currently used to select the references: - The document (or at least part of it) addresses the preservation of RKM in connection with the management of radioactive waste - The document is publicly available or can be made available upon request - One synthesis document (such as a report) is preferable to a list of papers with a similar content. - Original documents (scientific reports and papers) are preferred to reviews or press coverage. The bibliography should help the participants in the project to identify the topics of concern in the field of RKM and, eventually, the issues that have not yet been addressed. The current bibliography is not meant to be an all-encompassing list that includes any generic reference that might be useful in the study of those topics. Therefore it does not include: - general studies outside RWM, e.g. on memory loss, communication, or the history of institutions - studies belonging to the field of RWM but that are only indirectly related to RKM preservation

To implement REX today: why? How? References for an event-related return on experience as a source of learning

International Nuclear Information System (INIS)

Bringaud, Violaine; Fayolle, Patrice; Madec, Veronique; Gauthereau, Vincent; Raud, Geraldine; Hernandez, Guillaume; Vautier, Jean-Francois; Le Roy, Guilhem; Maffre, Jean-Francois; Pichancourt, Isabelle; Rousseau, Jean-Marie

2014-01-01

The REX (Return on Experience) is an arrangement which is supposed to allow lessons to be learned from dysfunctions occurring during activities in nuclear installations. This report, written by a work group, proposes a synthesis of some references regarding REX arrangements, and aims at deepening the discussion and at the evolution of these arrangements. It presents the different components of a REX arrangement, and outlines its operational objectives: to understand, to share and to act. It highlights the conditions for an efficient REX arrangement: definition of an event, analysis methods, analysis abilities, management approaches, corrective actions, and so on. It indicates how to use this document and some useful references

The MIRAGE project: large scale radionuclide transport investigations and integral migration experiments

International Nuclear Information System (INIS)

Come, B.; Bidoglio, G.; Chapman, N.

1986-01-01

Predictions of radionuclide migration through the geosphere must be supported by large-scale, long-term investigations. Several research areas of the MIRAGE Project are devoted to acquiring reliable data for developing and validating models. Apart from man-made migration experiments in boreholes and/or underground galleries, attention is paid to natural geological migration systems which have been active for very long time spans. The potential role of microbial activity, either resident or introduced into the host media, is also considered. In order to clarify basic mechanisms, smaller scale ''integral'' migration experiments under fully controlled laboratory conditions are also carried out using real waste forms and representative geological media. (author)

Practical experience with digital I and C retrofit projects gathered by independent experts

International Nuclear Information System (INIS)

Zeck, Kurt; Schildheuer, Reinhard; Weich, Alfred

2005-01-01

As independent experts, we have accompanied a series of major projects where plant control systems have been retrofitted with digital I and C technology. As General Expert Inspectors of our authority, we have investigated, inspected and certified such projects - from defining the tasks at hand trough planning, approving, implementing and commissioning down to the regular operation of the equipment. Our special focus has been on the proper adherence to the relevant safety issues in nuclear plants in accordance with the current state-of-the-art in science and technology, and to the applicable codes of practice. In September 2004, at the international 'Nuclear Plant Instrumentation, Control and Human Machine Interface Technology' meeting in Columbus/Ohio, we presented some major retrofit projects and reported about how we, as independent official experts, accompany and monitor the activities of retrofitting plants with advanced digital safety I and C equipment, from the safety point of view. With current report, we would like to provide more detailed information about the practical experience gained with digital safety I and C retrofits and the conclusions drawn for currently ongoing retrofit projects. We will look at both the technical and licensing aspects of implementing such projects

Latvian experience of 'Regional Project on Quality Control and Quality Assurance for Nuclear Analytical Techniques' (RER/2/004)

International Nuclear Information System (INIS)

Skujina, Anita

2002-01-01

This report outlined the Latvian Radiation Safety Centre experience gained from the participation in the project. The accomplishments of the project are presented and the main difficulties are identified. In the course of the project 16 operating procedures and 17 instructions have been developed and the laboratory operations have been set in accordance with the ISO 17025 requirements

Enhanced electricity system analysis for decision making - A reference book[Inter-agency joint project on data bases and methodologies for comparative assessment of different energy sources for electricity generation

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-06-01

(ESCAP), the International Atomic Energy Agency (IAEA), the International Bank for Reconstruction and Development (IBRD/World Bank), the International Institute for Applied Systems Analysis (IIASA), the Nuclear Energy Agency of the OECD (OECD/NEA), the Organization of Petroleum Exporting Countries (OPEC), the United Nations Industrial Development Organization (UNIDO) and the World Meteorological Organization (WMO). The main elements and achievements of the DECADES project are described in the different chapters of this book. Additional details are provided in the chapter references and in the bibliography. The Joint Steering Committee for the DECADES project hopes that this book will contribute to the process of strengthening and improving capabilities for the design and implementation of sustainable strategies in the power sector, in particular in developing countries and countries in transition to market economies. The reference book has been prepared with the assistance of many contributors, coming from national and international organizations active in the field of electricity system analysis. The initial drafting of the different chapters and annexes was carried out by highly qualified experts (see the list of contributors to preparation, drafting and review) who served as leading or contributing authors, drawing from their experience and know-how on the subject matter. The draft chapters prepared by the lead authors and contributors were harmonised and technically edited jointly by staff members of: the IAEA Planning and Economic Studies Section, the Nuclear Development Division of the OECD Nuclear Energy Agency, and the Industry and Energy Department of the World Bank (IBRD)

The iTREN-2030 reference scenario until 2030. Deliverable D4

Energy Technology Data Exchange (ETDEWEB)

Fiorello, Davide; De Stasio, Claudia; Koehler, Jonathan; Kraft, Markus; Netwon, Sean; Purwanto, Joko; Schade, Burkhard; Schade, Wolfgang; Szimba, Eckhard

2009-07-01

The basic objective of iTREN-2030 is to extend the forecasting and assessment capabilities of the TRANS-TOOLS transport model to the new policy issues arising from the technology, environment and energy fields. This is achieved by couplin the TRANS-TOOLS model with three other models, ASTRA, POLES and TREMOVE covering these new policy issues. The TRANS-TOOLS transport network model has been developed to constitute the reference tool for supporting transport policy in the EU and currently is being developed in several European projects. The scenario set-up to be developed in iTREN-2030 has been modified, so that the projects develops a reference scenario and an integrated scenario. For the reference scenario, the three other modelling tools are harmonised with TRANS-TOOLS and made consistent with each other. This results in a coherent scenario for Europe until 2030 for technology, transport, energy, environment and economic development. The integrated scenario will consider the changing framework conditions until 2030, inparticular the policy pressure coming from climate policy and the increasing scarcity of fossil fuels as well as the impact of the financial and economic crisis. Within the iTREN-2030 project, the overall objective of Work Package 4 (WP4) producing tis deliverable is to develop the reference scenario for the quantitative projections using the four modelling tools involved in the project. The main aims of WP4 are to (a) define a consistent framework for using the different tools in an integrated way; (b) calibrate models with exchanged input to a coherent joint reference; (c) implement external input from WP3 and running models for projections; (d) produce output procedures and templates to facilitate assessment in WP5.

HTR-E project. High-temperature components and systems

International Nuclear Information System (INIS)

Breuil, E.; Exner, R.

2002-01-01

The HTR-E European project (four years project) is proposed for the 5th Framework Programme and concerns the technical developments needed for the innovative components of a modern HTR with a direct cycle. These components have been selected with reference to the present projects (GT-MHR, PBMR): (1) the helium turbine, the recuperator heat exchanger, the electro-magnetic bearings and the helium rotating seal; (2) the tribology. Sliding innovative components in helium environment are particularly concerned. (3) the helium purification system. Recommendations on impurities contents have to be provided in accordance with the materials proposed for the innovative components. The main outcomes expected from the HTR-E project are the design recommendations and identification of further R and D needs for these components. This will be based: (1) on experience feedback from European past helium test loops and reactors; (2) on design studies, thermal-hydraulic and structural analyses; (3) and on experimental tests

Automatic tools for enhancing the collaborative experience in large projects

International Nuclear Information System (INIS)

Bourilkov, D; Rodriquez, J L

2014-01-01

With the explosion of big data in many fields, the efficient management of knowledge about all aspects of the data analysis gains in importance. A key feature of collaboration in large scale projects is keeping a log of what is being done and how - for private use, reuse, and for sharing selected parts with collaborators and peers, often distributed geographically on an increasingly global scale. Even better if the log is automatically created on the fly while the scientist or software developer is working in a habitual way, without the need for extra efforts. This saves time and enables a team to do more with the same resources. The CODESH - COllaborative DEvelopment SHell - and CAVES - Collaborative Analysis Versioning Environment System projects address this problem in a novel way. They build on the concepts of virtual states and transitions to enhance the collaborative experience by providing automatic persistent virtual logbooks. CAVES is designed for sessions of distributed data analysis using the popular ROOT framework, while CODESH generalizes the approach for any type of work on the command line in typical UNIX shells like bash or tcsh. Repositories of sessions can be configured dynamically to record and make available the knowledge accumulated in the course of a scientific or software endeavor. Access can be controlled to define logbooks of private sessions or sessions shared within or between collaborating groups. A typical use case is building working scalable systems for analysis of Petascale volumes of data as encountered in the LHC experiments. Our approach is general enough to find applications in many fields.

Calibration of an arbitrarily arranged projection moiré system for 3D shape measurement

Science.gov (United States)

Tang, Ying; Yao, Jun; Zhou, Yihao; Sun, Chen; Yang, Peng; Miao, Hong; Chen, Jubing

2018-05-01

An arbitrarily arranged projection moiré system is presented for three-dimensional shape measurement. We develop a model for projection moiré system and derive a universal formula expressing the relation between height and phase variation before and after we put the object on the reference plane. With so many system parameters involved, a system calibration technique is needed. In this work, we provide a robust and accurate calibration method for an arbitrarily arranged projection moiré system. The system no longer puts restrictions on the configuration of the optical setup. Real experiments have been conducted to verify the validity of this method.

‘Sampling the reference set’ revisited

NARCIS (Netherlands)

Berkum, van E.E.M.; Linssen, H.N.; Overdijk, D.A.

1998-01-01

The confidence level of an inference table is defined as a weighted truth probability of the inference when sampling the reference set. The reference set is recognized by conditioning on the values of maximal partially ancillary statistics. In the sampling experiment values of incidental parameters

20 CFR 404.1599 - Work incentive experiments and rehabilitation demonstration projects in the disability program.

Science.gov (United States)

2010-04-01

... the advantages and disadvantages of altering certain limitations and conditions that apply to title II... years from the start of the experiment or demonstration project). [48 FR 7575, Feb. 23, 1983, as amended...

FIPRED Project - Experiments and calculations

International Nuclear Information System (INIS)

Ohai, D.; Dumitrescu, I.; Doca, C.; Meleg, T.; Benga, D.

2009-01-01

Full text: The FIPRED (Fission Products Release from Debris Bed) Project was developed by INR in the framework of EC FP6 SARNET (2004-2008) and will be continued in EC FP6 SARNET2 (2009-2013). The project objective is the evaluation of fission product release from debris bed resulted after reactor severe accident by natural UO 2 sintered pellets self disintegration by oxidation. A large experimental program was performed covering the main parameters influencing granulometric distribution of powders (fragments) resulted from UO 2 sintered pellets self disintegration by air oxidation. The paper presents experimental results obtained and material equation obtained by mathematical calculations. (authors)

2011 Joint Science Education Project: Research Experience in Polar Science

Science.gov (United States)

Wilkening, J.; Ader, V.

2011-12-01

The Joint Science Education Project (JSEP), sponsored by the National Science Foundation, is a two-part program that brings together students and teachers from the United States, Greenland, and Denmark, for a unique cross-cultural, first-hand experience of the realities of polar science field research in Greenland. During JSEP, students experienced research being conducted on and near the Greenland ice sheet by attending researcher presentations, visiting NSF-funded field sites (including Summit and NEEM field stations, both located on the Greenland ice sheet), and designing and conducting research projects in international teams. The results of two of these projects will be highlighted. The atmospheric project investigated the differences in CO2, UVA, UVB, temperature, and albedo in different Arctic microenvironments, while also examining the interaction between the atmosphere and water present in the given environments. It was found that the carbon dioxide levels varied: glacial environments having the lowest levels, with an average concentration of 272.500 ppm, and non-vegetated, terrestrial environments having the highest, with an average concentration of 395.143 ppm. Following up on these results, it is planned to further investigate the interaction of the water and atmosphere, including water's role in the uptake of carbon dioxide. The ecology project investigated the occurrence of unusual large blooms of Nostoc cyanobacteria in Kangerlussuaq area lakes. The water chemistry of the lakes which contained the cyanobacteria and the lakes that did not were compared. The only noticeable difference was of the lakes' acidity, lakes containing the blooms had an average pH value of 8.58, whereas lakes without the blooms had an average pH value of 6.60. Further investigation of these results is needed to determine whether or not this was a cause or effect of the cyanobacteria blooms. As a next step, it is planned to attempt to grow the blooms to monitor their effects on

[Experience of knowledge translation in the ITSAL (immigration, work and health) research project with representatives of the target population].

Science.gov (United States)

Ronda, Elena; López-Jacob, M José; Paredes-Carbonell, Joan J; López, Pilar; Boix, Pere; García, Ana M

2014-01-01

This article describes the experience of knowledge translation between researchers of the ITSAL (immigration, work and health) project and representatives of organizations working with immigrants to discuss the results obtained in the project and future research lines. A meeting was held, attended by three researchers and 18 representatives from 11 institutions. Following a presentation of the methodology and results of the project, the participants discussed the results presented and research areas of interest, thus confirming matches between the two sides and obtaining proposals of interest for the ITSAL project. We understand the process described as an approach to social validation of some of the main results of this project. This experience has allowed us to open a channel of communication with the target population of the study, in line with the necessary two-way interaction between researchers and users. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

FIX-II. Loca-blowdown heat transfer and pump trip experiments. Summary report of phase 1: Design of experiments

International Nuclear Information System (INIS)

Waaranperae, Y.; Nilsson, L.; Gustafsson, P.Aa.; Jonsson, N.O.

1979-06-01

FIX-II is a loss of coolant blowdown heat transfer experiment, performed under contract for The Swedish Nuclear Power Inspectorate, SKI. The purpose of the experiments is to provide measurements from simulations of a pipe rupture on an external recirculation line in a Swedish BWR. Pump trips in BWRs with internal recirculation pumps will also be simulated. The existing FIX-loop at the Thermal Engineering Laboratory of Studsvik Energiteknik AB will be modified and used for the experiments. Components are included to simulate the steam dome, downcomer, two recirculation lines with one pump each, lower plenum, core (36-rod full length bundle), control rod guide tubes, core bypass, upper plenum and steam separators. The results of the first phase of the project are reported here. The following tasks are included in Phase 1: reactor reference analysis, scaling calculations of the FIX loop, development of fuel rod simulators, design of test section and test loop layout and proposal for test program. Further details of the work and results obtained for the different sub-projects are published in a number ofdetailed reports. (author)

Sizewell 'B' PWR reference design

International Nuclear Information System (INIS)

1982-04-01

The reference design for a PWR power station to be constructed as Sizewell 'B' is presented in 3 volumes containing 14 chapters and in a volume of drawings. The report describes the proposed design and provides the basis upon which the safety case and the Pre-Construction Safety Report have been prepared. The station is based on a 3425MWt Westinghouse PWR providing steam to two turbine generators each of 600 MW. The layout and many of the systems are based on the SNUPPS design for Callaway which has been chosen as the US reference plant for the project. (U.K.)

Rocket to Creativity: A Field Experience in Problem-Based and Project-Based Learning

Science.gov (United States)

Dole, Sharon F.; Bloom, Lisa A.; Doss, Kristy Kowalske

2016-01-01

This article reports the impact of a field experience in problem-based (PBL) and project-based learning (PjBL) on in-service teachers' conceptions of experiential learning. Participants had been enrolled in a hybrid class that included an online component in which they learned about PBL and PjBL, and an experiential component in which they…

Financing of nuclear projects. Lessons from a recent experience

International Nuclear Information System (INIS)

Shubert, U.

2004-01-01

The advantages of mandating BNP Paribas as a lead bank and arranger for NPP Belene are presented. BNPP has an excellent record and credentials in Nuclear Power Plant Projects internationally and in the local energy sector and very recent experience as a lead bank for the fifth nuclear power plant in Finland. BNPP has a proven track record as Provider of rapid and efficient ECA financing in terms of: managing in parallel the number of ECA contractual relations, so as to provide 'matching opportunities' between the ECAs and leverage to improve their terms and conditions, and to harmonize them in one set of unified legal documentation. There is no cost to the Government of Bulgaria until the signing of the Facility Documentation

Lidars for Wind Tunnels - an IRPWind Joint Experiment Project

DEFF Research Database (Denmark)

Sjöholm, Mikael; Vignaroli, Andrea; Angelou, Nikolas

2017-01-01

Measurement campaigns with continuous-wave Doppler Lidars (Light detection and ranging) developed at DTU Wind Energy in Denmark were performed in two very different wind tunnels. Firstly, a measurement campaign in a small icing wind tunnel chamber at VTT in Finland was performed with high frequency...... used in blind test comparisons for wind turbine wake modelers. These Lidar measurement activities constitute the Joint Experiment Project” L4WT - Lidars for Wind Tunnels, with applications to wakes and atmospheric icing in a prospective Nordic Network” with the aim of gaining and sharing knowledge...... about possibilities and limitations with lidar instrumentation in wind tunnels, which was funded by the IRPWind project within the community of the European Energy Research Alliance (EERA) Joint Programme on Wind Energy....

Memory systems interaction in the pigeon: working and reference memory.

Science.gov (United States)

Roberts, William A; Strang, Caroline; Macpherson, Krista

2015-04-01

Pigeons' performance on a working memory task, symbolic delayed matching-to-sample, was used to examine the interaction between working memory and reference memory. Reference memory was established by training pigeons to discriminate between the comparison cues used in delayed matching as S+ and S- stimuli. Delayed matching retention tests then measured accuracy when working and reference memory were congruent and incongruent. In 4 experiments, it was shown that the interaction between working and reference memory is reciprocal: Strengthening either type of memory leads to a decrease in the influence of the other type of memory. A process dissociation procedure analysis of the data from Experiment 4 showed independence of working and reference memory, and a model of working memory and reference memory interaction was shown to predict the findings reported in the 4 experiments. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

Border collie comprehends object names as verbal referents.

Science.gov (United States)

Pilley, John W; Reid, Alliston K

2011-02-01

Four experiments investigated the ability of a border collie (Chaser) to acquire receptive language skills. Experiment 1 demonstrated that Chaser learned and retained, over a 3-year period of intensive training, the proper-noun names of 1022 objects. Experiment 2 presented random pair-wise combinations of three commands and three names, and demonstrated that she understood the separate meanings of proper-noun names and commands. Chaser understood that names refer to objects, independent of the behavior directed toward those objects. Experiment 3 demonstrated Chaser's ability to learn three common nouns--words that represent categories. Chaser demonstrated one-to-many (common noun) and many-to-one (multiple-name) name-object mappings. Experiment 4 demonstrated Chaser's ability to learn words by inferential reasoning by exclusion--inferring the name of an object based on its novelty among familiar objects that already had names. Together, these studies indicate that Chaser acquired referential understanding of nouns, an ability normally attributed to children, which included: (a) awareness that words may refer to objects, (b) awareness of verbal cues that map words upon the object referent, and (c) awareness that names may refer to unique objects or categories of objects, independent of the behaviors directed toward those objects. Copyright © 2010 Elsevier B.V. All rights reserved.

National plan project of quotas allocation. Reference period

International Nuclear Information System (INIS)

2004-06-01

This document described the national plan project of greenhouse gases quotas allocation, in application of the directive 2003/87/CE. It is a preliminary document providing hypothesis, data and results which could well be modified. It presents in seven chapters the determination of the final quotas quantity, the determination of the final quotas quantity per each activity sectors and per installation, the technical aspects, the community policy and legislation, the public consultation and other criteria analysis. (A.L.B.)

References and arrow notation instead of join operation in query languages

Directory of Open Access Journals (Sweden)

Alexandr Savinov

2012-10-01

Full Text Available We study properties of the join operation in query languages and describe some of its major drawbacks. We provide strong arguments against using joins as a main construct for retrieving related data elements in general purpose query languages and argue for using references instead. Since conventional references are quite restrictive when applied to data modeling and query languages, we propose to use generalized references as they are defined in the concept-oriented model (COM. These references are used by two new operations, called projection and de-projection, which are denoted by right and left arrows and therefore this access method is referred to as arrow notation. We demonstrate advantages of the arrow notation in comparison to joins and argue that it makes queries simpler, more natural, easier to understand, and the whole query writing process more productive and less error-prone.

Project 2010 For Dummies

CERN Document Server

Muir, Nancy C

2010-01-01

A friendly reference guide to Microsoft Project, the leading enterprise project management software. As project management software, Microsoft Project allows you to oversee your business activities effectively. You can manage resources, share project info, perform modeling and scenario analysis, and standardize reporting processes. This easy-to-understand guide is completely updated to cover the latest changes and newest enhancements to Project 2010 and shows you how to get Project 2010 to work for you. After an introduction to basic project management concepts, you'll discover the mechanics o

Theoretical Support of Heat Exchanger Experiments of the EU-CONGA Project

International Nuclear Information System (INIS)

Herranz, L. E.; Lopez Jimenez, J.; Munoz-Cobo, J. L.; Palomo, M. J.

1999-01-01

In this report the work carried out within the Work Package 5 of the CONGA project under the auspices of the European Union has been presented. Primarily focused on studying from a theoretical perspective the degradation of heat exchangers to be used in next generation of European reactor containments under accident conditions, and particularly the effect of aerosols, the objective has been met quite satisfactorily and the results can be summed up in three specific items: - A mathematical model of a mechanistic nature that has been encapsulated into a FORTRAN code (HTCFOUL) capable of simulating condensation heat transfer to a horizontal finned tube internally cooled. - A theoretical correlation depending upon non-dimensional variables and numbers which embodies most of the HTCFOUL physics and gives results not beyond 20% of actual HTCFOUL estimates. - A reasonable interpretation of the major measurements and observations obtained in the heat exchanger experiments performed within the Work Package 2 of the CONGA project. (Author) 55 refs

Coordinators' experience-self evaluation of project development status

International Nuclear Information System (INIS)

Sijali, I.V

2009-01-01

Outlines the progress of the project as follows, design cleared ny NLO, PMO and team refined the submitted project design to improve it's quality. Comments and any questions invited deadline 23 may 2008, endorsement of the project by Tuesday 24 June 2008 and project completed

Reference Model 6 (RM6): Oscillating Wave Energy Converter.

Energy Technology Data Exchange (ETDEWEB)

Bull, Diana L; Smith, Chris; Jenne, Dale Scott; Jacob, Paul; Copping, Andrea; Willits, Steve; Fontaine, Arnold; Brefort, Dorian; Gordon, Margaret Ellen; Copeland, Robert; Jepsen, Richard Alan

2014-10-01

This report is an addendum to SAND2013-9040: Methodology for Design and Economic Analysis of Marine Energy Conversion (MEC) Technologies. This report describes an Oscillating Water Column Wave Energy Converter reference model design in a complementary manner to Reference Models 1-4 contained in the above report. In this report, a conceptual design for an Oscillating Water Column Wave Energy Converter (WEC) device appropriate for the modeled reference resource site was identified, and a detailed backward bent duct buoy (BBDB) device design was developed using a combination of numerical modeling tools and scaled physical models. Our team used the methodology in SAND2013-9040 for the economic analysis that included costs for designing, manufacturing, deploying, and operating commercial-scale MEC arrays, up to 100 devices. The methodology was applied to identify key cost drivers and to estimate levelized cost of energy (LCOE) for this RM6 Oscillating Water Column device in dollars per kilowatt-hour ($/kWh). Although many costs were difficult to estimate at this time due to the lack of operational experience, the main contribution of this work was to disseminate a detailed set of methodologies and models that allow for an initial cost analysis of this emerging technology. This project is sponsored by the U.S. Department of Energy's (DOE) Wind and Water Power Technologies Program Office (WWPTO), within the Office of Energy Efficiency & Renewable Energy (EERE). Sandia National Laboratories, the lead in this effort, collaborated with partners from National Laboratories, industry, and universities to design and test this reference model.

Quick Reference for Financial Reporting

International Development Research Centre (IDRC) Digital Library (Canada)

Alexandra Eustache

Quick Reference – Financial Reporting. 6. Complete FR3 - Payment Receipts, Foreign Exchange and Other Income Forms: a. Enter in Section 3A – Payment Receipt Form all payments received from IDRC. b. Use the Cash Exchange Form if the funds received from IDRC are held in a currency other than the project working ...

An IS Project Management Course Project

Science.gov (United States)

Frank, Ronald L.

2010-01-01

Information Systems curricula should provide project management (PM) theory, current practice, and hands-on experience. The schedule usually does not allow time in Analysis and Design courses for development oriented project management instruction other than a short introduction. Similarly, networking courses usually don't put project management…

Experiences on current national income measures with reference to environmental and natural resources

International Nuclear Information System (INIS)

Franzese, R.; Gaudioso, D.

1995-06-01

The environment provides both a source of goods and services and a 'sink' for residues of the production and consumption processes. This is not reflected into conventional estimate of GDP (gross domestic product), the most commonly used measure of aggregate income. The purpose of this paper is to explore whether environmentally-adjusted national income measure can be derived. In the first part, the authors discuss both the shortcomings of the current national income measures, with reference to environmental and natural resources, and the debate on this issues; then they analyse the existing experiences to provide environmentally-adjusted indicators of national accounts. In the second part, the authors present an evaluation of the costs of environmental degradation in Italy in the period 1988-1990, based on the methodologies adopted in a pilot study carried out by UNSO (United Nations Statistical Office) and the World Bank for Mexico

MIV Project: Executive Summary

DEFF Research Database (Denmark)

Ravazzotti, Mariolina T.; Jørgensen, John Leif; Neefs, Marc

1997-01-01

Under the ESA contract #11453/95/NL/JG(SC), aiming at assessing the feasibility of Rendez-vous and docking of unmanned spacecrafts, a reference mission scenario was defined. This report gives an executive summary of the achievements and results from the project.......Under the ESA contract #11453/95/NL/JG(SC), aiming at assessing the feasibility of Rendez-vous and docking of unmanned spacecrafts, a reference mission scenario was defined. This report gives an executive summary of the achievements and results from the project....

The Pan-European Reference Grid Developed in the ELECTRA Project for Deriving Innovative Observability Concepts in the Web-of-Cells Framework

DEFF Research Database (Denmark)

Marinelli, Mattia; Pertl, Michael; Rezkalla, Michel M.N.

2016-01-01

In the ELECTRA EU project, an innovative approach for frequency and voltage control is investigated, with reference to future power system scenarios characterized by massive amounts of distributed energy resources. A control architecture based on dividing the power system into a web of subsystems...... at system-wide scale. The methodology proposed in the task analyzes the system performance by investigating typical phenomena peculiar to each stability type and by developing observables necessary for the novel Web-of-Cells based control methods to operate properly at cell- and inter-cell level. Crucial...

Evolution and experience with the ATLAS Simulation at Point1 Project

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00389536; The ATLAS collaboration; Brasolin, Franco; Kouba, Tomas; Schovancova, Jaroslava; Fazio, Daniel; Di Girolamo, Alessandro; Scannicchio, Diana; Twomey, Matthew Shaun; Wang, Fuquan; Zaytsev, Alexander; Lee, Christopher

2017-01-01

The Simulation at Point1 project is successfully running standard ATLAS simulation jobs on the TDAQ HLT resources. The pool of available resources changes dynamically, therefore we need to be very effective in exploiting the available computing cycles. We present our experience with using the Event Service that provides the event-level granularity of computations. We show the design decisions and overhead time related to the usage of the Event Service. The improved utilization of the resources is also presented with the recent development in monitoring, automatic alerting, deployment and GUI.

Evolution and experience with the ATLAS simulation at Point1 project

CERN Document Server

Ballestrero, Sergio; The ATLAS collaboration; Fazio, Daniel; Di Girolamo, Alessandro; Kouba, Tomas; Lee, Christopher; Scannicchio, Diana; Schovancova, Jaroslava; Twomey, Matthew Shaun; Wang, Fuquan; Zaytsev, Alexander

2016-01-01

The Simulation at Point1 project is successfully running traditional ATLAS simulation jobs on the TDAQ HLT resources. The pool of available resources changes dynamically, therefore we need to be very effective in exploiting the available computing cycles. We will present our experience with using the Event Service that provides the event-level granularity of computations. We will show the design decisions and overhead time related to the usage of the Event Service. The improved utilization of the resources will also be presented with the recent development in monitoring, automatic alerting, deployment and GUI.

Project W-211 initial tank retrieval systems year 2000 compliance assessment project plan

International Nuclear Information System (INIS)

BUSSELL, J.H.

1999-01-01

This document contains a limited assessment of Year 2000 compliance for Project W-211. Additional information is provided as a road map to project documents and other references that may be used to verify Year 2000 compliance

The CHPRC Columbia River Protection Project Quality Assurance Project Plan

International Nuclear Information System (INIS)

Fix, N.J.

2008-01-01

Pacific Northwest National Laboratory researchers are working on the CHPRC Columbia River Protection Project (hereafter referred to as the Columbia River Project). This is a follow-on project, funded by CH2M Hill Plateau Remediation Company, LLC (CHPRC), to the Fluor Hanford, Inc. Columbia River Protection Project. The work scope consists of a number of CHPRC funded, related projects that are managed under a master project (project number 55109). All contract releases associated with the Fluor Hanford Columbia River Project (Fluor Hanford, Inc. Contract 27647) and the CHPRC Columbia River Project (Contract 36402) will be collected under this master project. Each project within the master project is authorized by a CHPRC contract release that contains the project-specific statement of work. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by the Columbia River Project staff

The CHPRC Columbia River Protection Project Quality Assurance Project Plan

Energy Technology Data Exchange (ETDEWEB)

Fix, N. J.

2008-11-30

Pacific Northwest National Laboratory researchers are working on the CHPRC Columbia River Protection Project (hereafter referred to as the Columbia River Project). This is a follow-on project, funded by CH2M Hill Plateau Remediation Company, LLC (CHPRC), to the Fluor Hanford, Inc. Columbia River Protection Project. The work scope consists of a number of CHPRC funded, related projects that are managed under a master project (project number 55109). All contract releases associated with the Fluor Hanford Columbia River Project (Fluor Hanford, Inc. Contract 27647) and the CHPRC Columbia River Project (Contract 36402) will be collected under this master project. Each project within the master project is authorized by a CHPRC contract release that contains the project-specific statement of work. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by the Columbia River Project staff.

The Time Projection Chamber of the HARP Experiment

CERN Document Server

Lundborg, A

2002-01-01

The hadron production experiment HARP aims to measure hadron collision cross sections with a 2-15 GeV particle beam and several targets. This energy regime is in a borderline zone between the low energy region dominated by resonance formation and the high energy domain where perturbative Quantum Chromo Dynamics is applicable. The emphasis of this master thesis is put on the HARP central tracker, the Time Projection Chamber (TPC). In the thesis work, Finite Element Method computations of the electric field in critical regions of the TPC have been performed to provide design input concerning the electrostatic configuration of the field cages and of the wire chamber. A first step in the chain of reconstruction of the information produced by the detector is the equalisation and monitoring of about 4000 analogue signals. An algorithm that processes the raw digitised signals, filters out electronics noise and extracts the pad gain from signal distributions has been produced and analysed for this purpose. The algori...

Positive experience in the construction and project management of Kashiwazaki-Kariwa no. 6 and no. 7

International Nuclear Information System (INIS)

Minematsu, A.

1999-01-01

Kashiwazaki-Kariwa No.6 and No.7 (K-6/7), the world first Advanced Boiling Water Reactor (ABWR) units, started commercial operations on November 7, 1996 and July 2, 1997 respectively. ABWR has been developed as a standard design of the next generation BWR to meet common goals set by the Japanese electric utilities and BWR manufacturers (GE, Hitachi and Toshiba) based on our design, construction, operation and maintenance experience of nuclear power plants. The construction of K-6/7 and confirmatory tests for the verification of the first-of-a-kind (FOAK) design features of ABWR were conducted smoothly without any delay. The duration of the construction was 51.5 months. It was shorter than conventional BWRs in Japan by nearly one year. This was realized by design features of ABWR for better constructability, a principle of 'test before use' applied to the FOAKs, advanced construction technology, detailed engineering at very early stages of the project, and good construction management. The positive experience in the K-6/7 project is now being reviewed and standardized for next ABWR projects. The data and knowledge accumulated through the K-6/7 project will be utilized effectively with the aide of the latest information technology. (author)

Batch and column studies of adsorption of Li, Ni and Br by a reference sand for contaminant transport experiments

International Nuclear Information System (INIS)

Seigel, M.D.; Ward, D.B.; Bryan, C.R.

1995-09-01

A processed quartz sand (Wedron 510), mined from the St. Peter sandstone, has been characterized by a variety of chemical and physical methods for use as a reference porous media in transport model validation experiments. Wedron 510 sand was used in an intermediate-scale experiment involving migration of Ni, Li and Br through a 6-m high x 3-m diameter caisson. Ni and Li adsorption/desorption, and Li/Ni site-competition experiments yielded information on the importance of the trace mineral phases to adsorption of Li and Ni by the sand. The presence of an iron hydroxide coating similar to goethite on the sand grains is suggested by visual observation and leaching experiments. Kaolinite was identified by SEM and XRD as a significant trace mineral phase in the sand and occurs as small particles coating the sand grains. Quartz, the predominant constituent of the sand by weight, does not appear to contribute significantly to the adsorption properties of the sand. Qualitatively, the adsorption properties of the sand can be adequately modeled as a two-mineral system (goethite and kaolinite). The studies described in this report should provide a basis for understanding transport of Ni, Li and Br through porous media similar to the reference sand. Techniques were developed for obtaining parameter values for surface complexation and kinetic adsorption models for the sand and its mineral components. These constants can be used directly in coupled hydrogeochemical transport codes. The techniques should be useful for characterization of other natural materials and elements in high-level nuclear waste in support of coupled hydrogeochemical transport calculations for Yucca Mountain

Overview of large scale experiments performed within the LBB project in the Czech Republic

Energy Technology Data Exchange (ETDEWEB)

Kadecka, P.; Lauerova, D. [Nuclear Research Institute, Rez (Czechoslovakia)

1997-04-01

During several recent years NRI Rez has been performing the LBB analyses of safety significant primary circuit pipings of NPPs in Czech and Slovak Republics. The analyses covered the NPPs with reactors WWER 440 Type 230 and 213 and WWER 1000 Type 320. Within the relevant LBB projects undertaken with the aim to prove the fulfilling of the requirements of LBB, a series of large scale experiments were performed. The goal of these experiments was to verify the properties of the components selected, and to prove the quality and/or conservatism of assessments used in the LBB-analyses. In this poster, a brief overview of experiments performed in Czech Republic under guidance of NRI Rez is presented.

How public issues shape environmental restoration plans - experiences with Colorado UMTRA projects

International Nuclear Information System (INIS)

Hunt, B.; Monaghan, J.

1991-01-01

Federal environmental restoration plans are being significantly impacted by open-quotes grassrootsclose quotes public pressure and by community demands, some of which have little relation to the technical standards of remediation and which go well beyond authorizing legislation. These demands often represent significant additional project costs. A review of Uranium Mill Tailings Remedial Action (UMTRA) Program experiences in Colorado suggests that the more serious open-quotes grassrootsclose quotes issues associated with remediation rarely diminish and, in fact, will intensify over time. This presents program administrators with the dilemma of attempting to adhere to program mandates and keep projects within budget, while at the same time trying to be responsive to community concerns. Such high-profiled community debates have the ability to delay remediation and even jeopardize important projects. After prolonged public debate, when it becomes clear an issue will not dissipate, project officials may be forced to meet certain community demands. Often, this results in not only increased costs, but a loss of public confidence in clean-up efforts. Evidence also suggests, however, that when critical public issues can be identified and addressed before they become overly contentious, significant problems and controversy can be avoided; but, the situation is made difficult because project officials often lack the policy guidance to determine which, if any, community demands should be addressed and to what extent they should be met. The adoption of several key public policy principles by program administrators will provide a greater ability to address community demands in a timely and successful manner

OMEGA project

International Nuclear Information System (INIS)

Shibuya, E.H.

1989-01-01

The OMEGA - Observation of Multiple particle production, Exotic Interactions and Gamma-ray Air Shower-project is presented. The project try to associate photosensitive detectors from experiences of hadronic interactions with electronic detectors used by experiences that investigate extensive atmospheric showers. (M.C.K.)

Economics of Large Helium Cryogenic Systems experience from Recent Projects at CERN

CERN Document Server

Claudet, S; Lebrun, P; Tavian, L; Wagner, U

1999-01-01

Large projects based on applied superconductivity, such as particle accelerators, tokamaks or SMES, require powerful and complex helium cryogenic systems, the cost of which represents a significant, if not dominant fraction of the total capital and operational expenditure. It is therefore important to establish guidelines and scaling laws for costing such systems, based on synthetic estimators of their size and performance. Although such data has already been published for many years, the experience recently gathered at CERN with the LEP and LHC projects, which have de facto turned the laboratory into a major world cryogenic center, can be exploited to update this information and broaden the range of application of the scaling laws. We report on the economics of 4.5 K and 1.8 K refrigeration, cryogen distribution and storage systems, and indicate paths towards their cost-to-performance optimisation.

EPRTM project experience: selection of partners and supply chain; Experiencia en Proyectos de EPTTM: seleccion de socios y cadena de suministros

Energy Technology Data Exchange (ETDEWEB)

Lorenzo, D. de

2012-07-01

With 4 EPRTM units under construction, the new plants to be built in the following years will benefit from the return on experience of the work already performed. The knowledge about licensing processes, detail engineering, supply chain, logistics and on-site work gathered from the Olkiluoto 3 and Flamanville 3 projects has already been used in the Taishan 1 and 2 project, resulting in a project that is on schedule and on budget. This article will show how the advantage of such broad experience gained will be used to benefit future projects to ensure certainty of completion, leaving few and limited unresolved issues even before the beginning of the project. Several areas that are not usually tackled when speaking of a New Build project will be covered by this text from the point of view of a nuclear vendor: Project Partnership Selection and the Gate Review Process applied by AREVA in the supply chain of the main components. (Author)

Building international experiences into an engineering curriculum - a design project-based approach

Science.gov (United States)

Maldonado, Victor; Castillo, Luciano; Carbajal, Gerardo; Hajela, Prabhat

2014-07-01

This paper is a descriptive account of how short-term international and multicultural experiences can be integrated into early design experiences in an aerospace engineering curriculum. Such approaches are considered as important not only in fostering a student's interest in the engineering curriculum, but also exposing them to a multicultural setting that they are likely to encounter in their professional careers. In the broader sense, this programme is described as a model that can be duplicated in other engineering disciplines as a first-year experience. In this study, undergraduate students from Rensselaer Polytechnic Institute (RPI) and Universidad del Turabo (UT) in Puerto Rico collaborated on a substantial design project consisting of designing, fabricating, and flight-testing radio-controlled model aircraft as a capstone experience in a semester-long course on Fundamentals of Flight. The two-week long experience in Puerto Rico was organised into academic and cultural components designed with the following objectives: (i) to integrate students in a multicultural team-based academic and social environment, (ii) to practise team-building skills and develop students' critical thinking and analytical skills, and finally (iii) to excite students about their engineering major through practical applications of aeronautics and help them decide if it is a right fit for them.

Project studies

DEFF Research Database (Denmark)

Geraldi, Joana; Söderlund, Jonas

2018-01-01

Project organising is a growing field of scholarly inquiry and management practice. In recent years, two important developments have influenced this field: (1) the study and practice of projects have extended their level of analysis from mainly focussing on individual projects to focussing on micro......, and of the explanations of project practices they could offer. To discuss avenues for future research on projects and project practice, this paper suggests the notion of project studies to better grasp the status of our field. We combine these two sets of ideas to analyse the status and future options for advancing...... project research: (1) levels of analysis; and (2) type of research. Analysing recent developments within project studies, we observe the emergence of what we refer to as type 3 research, which reconciles the need for theoretical development and engagement with practice. Type 3 research suggests pragmatic...

Managing projects for life cycle success : perfecting the process

Energy Technology Data Exchange (ETDEWEB)

Jenkins, A. [TransCanada PipeLines Ltd., Calgary, AB (Canada); Babuk, T. [Empress International Inc., Westwood, NJ (United States); Mohitpour, M. [Tempsys Pipeline Solutions Inc., Vancouver, BC (Canada)

2004-07-01

This paper presented a historical summary of traditional project management along with a discussion on the project management and development philosophy that can be used in a large infrastructure company that develops and operates its own projects and facilities. Two case studies from the experiences of TransCanada Pipelines Limited were also presented. It was suggested that companies seeking a first-rate reputation must maintain a long-term focus with emphasis on the improvement of the total process and harmony with the environment and community. This paper explained how project managers can create balance between the proponents, stakeholders, participants and the people and the environment while ensuring a cost effective quality product over time. Successful project managers were shown to understand and manage the components of scope, time, cost, quality, human resources, communication, risk, purchasing, safety and harmony with the community. Project development from the perspective of an owner-operator was presented with reference to consistency in approach and the decision making process. It was concluded that although project managers should focus on controlling and minimizing capital expenditures during project engineering and construction, the many elements that contribute to a project's value should also be recognized. 10 refs., 6 figs.

A transportation economics reference for practitioners : final report.

Science.gov (United States)

2013-03-01

Transportation projects and policies are rooted in economic considerations and consequences. This report : documents the development of a relatively comprehensive transportation economics reference for practitioners, : entitled The Economics of Trans...

Effects of Collective Efficacy, Teamwork Attitudes, and Experience on Group Project Performance: Comparisons between 2 Food Science Courses

Science.gov (United States)

McLeod, Poppy Lauretta; Orta-Ramirez, Alicia

2018-01-01

The relationship between past teamwork and task-related experiences, attitude toward teamwork, collective efficacy, and task performance among undergraduates (N = 298) assigned to group projects (N = 48) in 2 different Food Science courses was examined. The results of survey data collected at the beginning and end of the projects showed that past…

Growth and Expansion of the International Criticality Safety Benchmark Evaluation Project and the Newly Organized International Reactor Physics Experiment Evaluation Project

International Nuclear Information System (INIS)

J. Blair Briggs; Lori Scott; Yolanda Rugama; Enrico Satori

2007-01-01

Since ICNC 2003, the International Criticality Safety Benchmark Evaluation Project (ICSBEP) has continued to expand its efforts and broaden its scope. Criticality-alarm/shielding type benchmarks and fundamental physics measurements that are relevant to criticality safety applications are not only included in the scope of the project, but benchmark data are also included in the latest version of the handbook. A considerable number of improvements have been made to the searchable database, DICE and the criticality-alarm/shielding benchmarks and fundamental physics measurements have been included in the database. There were 12 countries participating on the ICSBEP in 2003. That number has increased to 18 with recent contributions of data and/or resources from Brazil, Czech Republic, Poland, India, Canada, and China. South Africa, Germany, Argentina, and Australia have been invited to participate. Since ICNC 2003, the contents of the ''International Handbook of Evaluated Criticality Safety Benchmark Experiments'' have increased from 350 evaluations (28,000 pages) containing benchmark specifications for 3070 critical or subcritical configurations to 442 evaluations (over 38,000 pages) containing benchmark specifications for 3957 critical or subcritical configurations, 23 criticality-alarm-placement/shielding configurations with multiple dose points for each, and 20 configurations that have been categorized as fundamental physics measurements that are relevant to criticality safety applications in the 2006 Edition of the ICSBEP Handbook. Approximately 30 new evaluations and 250 additional configurations are expected to be added to the 2007 Edition of the Handbook. Since ICNC 2003, a reactor physics counterpart to the ICSBEP, The International Reactor Physics Experiment Evaluation Project (IRPhEP) was initiated. Beginning in 1999, the IRPhEP was conducted as a pilot activity by the by the Organization of Economic Cooperation and Development (OECD) Nuclear Energy Agency

Turbine Control System Replacement at NPP NEK; System Specifics, Project Experience and Lessons Learned

International Nuclear Information System (INIS)

Mandic, D.; Zilavy, M. J.

2010-01-01

constitutes only of soft panels or monitor graphics (all MCB - Main Control Board and its controls are available as graphic images on workstations), while the HMI for FG KFSS includes full scope replica of NEK MCR and MCB. The new PDEH system was installed on two KFSS platforms (BG and FG) in October-November, 2008; pre-outage or on-line field installation work was performed in the January-March 2009 time frame; while the old DEH Mod II was decommissioned and the new plant PDEH system was installed during the outage in April, 2009 and tested with the plant on line in May, 2009. PDEH system improvements and specifics compared to the old DEH system and compared to other similar references will be presented and the most interesting project experience and lessons learned will also be discussed in the paper.(author).

Adult English Language Learners Constructing and Sharing Their Stories and Experiences: The Cultural and Linguistic Autobiography Writing Project

Science.gov (United States)

Park, Gloria

2011-01-01

This article is the culmination of the Cultural and Linguistic Autobiography (CLA) writing project, which details narrative descriptions of adult English language learners' (ELLs') cultural and linguistic experiences and how those experiences may have influenced the ways in which these learners constructed and reconstructed their identities.…

Project W-519 TWRS privatization phase 1 infrastructure year 2000 compliance assessment project plan

International Nuclear Information System (INIS)

BUSSELL, J.H.

1999-01-01

This document contains a limited assessment of Year 2000 compliance for Project W-519. Additional information is provided as a road map to project documents and other references that may be used to verify Year 2000 compliance

Program reference schedule baseline

International Nuclear Information System (INIS)

1986-07-01

This Program Reference Schedule Baseline (PRSB) provides the baseline Program-level milestones and associated schedules for the Civilian Radioactive Waste Management Program. It integrates all Program-level schedule-related activities. This schedule baseline will be used by the Director, Office of Civilian Radioactive Waste Management (OCRWM), and his staff to monitor compliance with Program objectives. Chapter 1 includes brief discussions concerning the relationship of the PRSB to the Program Reference Cost Baseline (PRCB), the Mission Plan, the Project Decision Schedule, the Total System Life Cycle Cost report, the Program Management Information System report, the Program Milestone Review, annual budget preparation, and system element plans. Chapter 2 includes the identification of all Level 0, or Program-level, milestones, while Chapter 3 presents and discusses the critical path schedules that correspond to those Level 0 milestones

Fiscal Feasibility Assessment Applied to Transport Infrastructure Projects

Energy Technology Data Exchange (ETDEWEB)

Guilherme de Aragão, J.J.; Santos Fontes Pereira, L. dos; Yamashita, Y.; Brandão, R.

2016-07-01

The demand for transport infrastructure investment is a latent issue for several countries, mainly for developing countries. However, investments in major logistics projects should be carefully evaluated, in order that their deployment induces development without endangering fiscal sustainability by excessive public indebtedness. Fiscal accounting practices used currently in the feasibility studies of transport infrastructures in Brazil are very limited, as they do not consider indirect and induced effects of the infrastructure investment in the fiscal evaluation. In addition, the corresponding influence area has not an established delimitation method. The aim of the present paper is to develop a model for calculating economic and fiscal impacts of transport infrastructure investment projects that includes the direct, indirect and induced effects within a reference area do be determined. First, different project assessment guides in Brazil and abroad are examined with a special focus on the assessment of economic and fiscal impacts of the projects. Based on the assessment experience and on the definition of the fiscal balance of an infrastructure project, the next step sets up a framework for the calculation of the impacts, using more simplified data. (Author)

Preliminary on-surface experiments for backfilling a HLW repository: the ESDRED project

International Nuclear Information System (INIS)

Bastiaens, W.

2007-01-01

ESDRED is a technological integrated project within the context of the Sixth Framework Program of EURATOM. The project aims to demonstrate the technical feasibility at an industrial scale of specific technologies related to the construction, operation and closure of a deep geological repository for spent fuel and long-lived radioactive waste. The Belgian design for high level waste disposal is based on the so-called Supercontainer concept. Within this concept, the waste is encased in a carbon steel overpack, which is consequently fitted into a 70 cm thick concrete shell, in its turn enveloped by a stainless steel liner. A Supercontainer measures about 2 m in diameter. In the design of the repository, the Supercontainers will be emplaced, one after the other, in disposal galleries. The space between the Supercontainers and the gallery lining needs to be filled up with a solid material. The most essential function of this component, referred to as backfill, is to prevent a collapse of the gallery. A secondary function is to limit the presence of free oxygen, to limit corrosion. In the ESDRED project EIG EURIDICE, together with SCK-CEN and ONDRAF/NIRAS, investigates technologies to apply the backfill. Two options to apply the backfill were investigated within the ESDRED project: fill the gap with a granular material and backfill the gap with a grout. The prime operational target will be to achieve a 100 percent filling of the gap. A wide variety of materials was tested. A number of considerations regarding long-term safety and operational feasibility impose constraints on the backfill component:it should preserve the corrosion-protective environment established by the Supercontainer; it should not act as a thermal isolator; it should not introduce organic materials that can give rise to the formation of migration-enhancing complexes between radionuclides and soluble organic compounds; it should be feasible to construct at a sufficiently high rate; the strength of the

The physics analysis tools project for the ATLAS experiment

International Nuclear Information System (INIS)

Lenzi, Bruno

2012-01-01

The Large Hadron Collider is expected to start colliding proton beams in 2009. The enormous amount of data produced by the ATLAS experiment (≅1 PB per year) will be used in searches for the Higgs boson and Physics beyond the standard model. In order to meet this challenge, a suite of common Physics Analysis Tools has been developed as part of the Physics Analysis software project. These tools run within the ATLAS software framework, ATHENA, covering a wide range of applications. There are tools responsible for event selection based on analysed data and detector quality information, tools responsible for specific physics analysis operations including data quality monitoring and physics validation, and complete analysis tool-kits (frameworks) with the goal to aid the physicist to perform his analysis hiding the details of the ATHENA framework. (authors)

Choice of large projects

Energy Technology Data Exchange (ETDEWEB)

Harris, R

1978-08-01

Conventional cost/benefit or project analysis has generally not taken into account circumstances in which the project under consideration is large enough that its introduction to the economy would have significant general equilibrium effects. In this paper, rules are examined that would indicate whether such large projects should be accepted or rejected. The rules utilize information yielded by before-project and after-project equilibrium prices and production data. Rules are developed for the undistorted ''first-best'' case, the case in which the fixed costs of the project are covered by distortionary taxation, and for the case of projects producing public goods. 34 references.

Immune reactivity of candidate reference materials

NARCIS (Netherlands)

Fernandez-Rivas, Montserrat; Aalbers, Marja; Fötisch, Kay; de Heer, Pleuni; Notten, Silla; Vieths, Stefan; van Ree, Ronald

2006-01-01

Immune reactivity is a key issue in the evaluation of the quality of recombinant allergens as potential reference materials. Within the frame of the CREATE project, the immune reactivity of the natural and recombinant versions of the major allergens of birch pollen (Bet v 1), grass pollen (Phl p 1

Young Children Use Shared Experience to Interpret Definite Reference

Science.gov (United States)

Schmerse, Daniel; Lieven, Elena; Tomasello, Michael

2015-01-01

We investigated whether children at the ages of two and three years understand that a speaker's use of the definite article specifies a referent that is in common ground between speaker and listener. An experimenter and a child engaged in joint actions in which the experimenter chose one of three similar objects of the same category to perform an…

International Reactor Physics Experiment Evaluation (IRPhE) Project. IRPhE Handbook - 2015 edition

International Nuclear Information System (INIS)

Bess, John D.; Gullifor, Jim

2015-03-01

The purpose of the International Reactor Physics Experiment Evaluation (IRPhE) Project is to provide an extensively peer-reviewed set of reactor physics-related integral data that can be used by reactor designers and safety analysts to validate the analytical tools used to design next-generation reactors and establish the safety basis for operation of these reactors. This work of the IRPhE Project is formally documented in the 'International Handbook of Evaluated Reactor Physics Benchmark Experiments', a single source of verified and extensively peer-reviewed reactor physics benchmark measurements data. The evaluation process entails the following steps: Identify a comprehensive set of reactor physics experimental measurements data, Evaluate the data and quantify overall uncertainties through various types of sensitivity analysis to the extent possible, verify the data by reviewing original and subsequently revised documentation, and by talking with the experimenters or individuals who are familiar with the experimental facility, Compile the data into a standardized format, Perform calculations of each experiment with standard reactor physics codes where it would add information, Formally document the work into a single source of verified and peer reviewed reactor physics benchmark measurements data. The International Handbook of Evaluated Reactor Physics Benchmark Experiments contains reactor physics benchmark specifications that have been derived from experiments that were performed at nuclear facilities around the world. The benchmark specifications are intended for use by reactor designers, safety analysts and nuclear data evaluators to validate calculation techniques and data. Example calculations are presented; these do not constitute a validation or endorsement of the codes or cross-section data. The 2015 edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments contains data from 143 experimental series that were

Brazilian readers and contextual reference Brazilian readers and contextual reference

Directory of Open Access Journals (Sweden)

Lilia M. O. Carioni

2008-04-01

Full Text Available This article describes an experiment carried out using Brazilian university students at UFSC, the purpose being to check comprehension relationships between two types of contextual reference and two languages, Portuguese and English. A major stimulus for the research was the question: are Brazilian students' difficulties in reading English related more to English language difficulties or to difficulties in processing text in general?

The USE Project

DEFF Research Database (Denmark)

Frøkjær, E.; Hornbæk, K.; Høegh, Rune Thaarup

2006-01-01

This paper provides experience from activities in the USE project. The USE project is a research project that aims at bridging the gap between usability evaluation and user interface design. It is conducted from 2005 to 2008 in collaboration between researchers from Aalborg University and Copenha......This paper provides experience from activities in the USE project. The USE project is a research project that aims at bridging the gap between usability evaluation and user interface design. It is conducted from 2005 to 2008 in collaboration between researchers from Aalborg University...... and Copenhagen University, and developers and managers working in software development organizations....

Researchers' experience with project management in health and medical research: Results from a post-project review

Science.gov (United States)

2011-01-01

Background Project management is widely used to deliver projects on time, within budget and of defined quality. However, there is little published information describing its use in managing health and medical research projects. We used project management in the Alcohol and Pregnancy Project (2006-2008) http://www.ichr.uwa.edu.au/alcoholandpregnancy and in this paper report researchers' opinions on project management and whether it made a difference to the project. Methods A national interdisciplinary group of 20 researchers, one of whom was the project manager, formed the Steering Committee for the project. We used project management to ensure project outputs and outcomes were achieved and all aspects of the project were planned, implemented, monitored and controlled. Sixteen of the researchers were asked to complete a self administered questionnaire for a post-project review. Results The project was delivered according to the project protocol within the allocated budget and time frame. Fifteen researchers (93.8%) completed a questionnaire. They reported that project management increased the effectiveness of the project, communication, teamwork, and application of the interdisciplinary group of researchers' expertise. They would recommend this type of project management for future projects. Conclusions Our post-project review showed that researchers comprehensively endorsed project management in the Alcohol and Pregnancy Project and agreed that project management had contributed substantially to the research. In future, we will project manage new projects and conduct post-project reviews. The results will be used to encourage continuous learning and continuous improvement of project management, and provide greater transparency and accountability of health and medical research. The use of project management can benefit both management and scientific outcomes of health and medical research projects. PMID:21635721

Rocket to Creativity: A Field Experience in Problem-Based and Project-Based Learning

Directory of Open Access Journals (Sweden)

Sharon F. Dole

2016-11-01

Full Text Available The purpose of this article is to examine the impact of a field experience in problem-based (PBL and project-based learning (PjBL on pre-service and in-service teachers’ conceptions of experiential learning. In our study, participants had been enrolled in a hybrid class that included an online component in which they learned about PBL and PjBL and an experiential component in which they facilitated PBL and PjBL with children in grades 1-9 during a one-week field experience on a university campus. The goal of the field experience is for teachers to change their practice from didactic to inquiry and to promote critical and creative thinking in their students. We used a case study method that involved data derived from six different sources: online structured interviews, follow-up telephone interviews, discussion board posts, reflections, course feedback, and observations. The main theme that emerged from the data analysis was the critical role the field experience played in applying theory to practice. Sub-themes included understanding the process of implementing PBL and PjBL, mastering the logistics of PBL and PjBL, becoming facilitators, and collaborating with partners. Results showed that the field experience gave the teachers the “courage” to experiment with a student-centered methodology.

Exploring the experiences of female students in introductory project-based engineering courses at two- and four-year institutions

Science.gov (United States)

Swan, Amy K.

2011-12-01

This qualitative study explored the experiential and contextual factors that shaped female students' pathways into introductory project-based engineering classes at two community colleges and one four-year institution, as well as female students' experiences within and outside of these classes. The study was framed by Social Cognitive Career Theory (SCCT) (Lent, Brown & Hackett, 1996) and Bronfenbrenner's (1979) ecological systems theory. Findings were based on analyses of data gathered through multiple methods: observations; individual interviews with female students; focus group interviews with project teams; and document collection. The findings of this study revealed that while positive experiences with math or science were a likely pre-cursor to engineering interest, experiential learning appeared to be a more powerful force in fostering students' engineering interest. Specifically, participants developed an interest in engineering through academic, professional, and extracurricular engineering- and design-related activities that familiarized them with the tasks and skills involved in engineering work and helped them develop a sense of selfefficacy with regard to this work. Interest and self-efficacy, in turn, played a role in students' postsecondary educational decision-making processes, as did contextual factors including families and finances. This study's findings also showed that participants' project teams were a critically important microsystem within participants' ecological environments. Within this sometimes "chilly" microsystem, female students negotiated intrateam processes, which were in some cases affected by gender norms. Intrateam processes that influenced female students' project-based learning experiences included: interpersonal dynamics; leadership; and division of labor. This study also identified several ways in which the lived experiences of participants at the community colleges were different from, or similar to, those of participants

H2020 692819 SIMPATICO - D1.1: Project Management Plan

OpenAIRE

Forner, Pamela; Gerosa, Matteo; Folograna, Antonio

2017-01-01

This document is the deliverable “D1.1 – Project Management Plan” of the European project “SIMPATICO - SIMplifying the interaction with Public Administration Through Information technology for Citizens and cOmpanies” (hereinafter also referred to as “SIMPATICO”, project reference: 692819). The SIMPATICO Project Management Plan (PMP) is the main planning document and describes how major aspects of the project are managed, monitored and controlled. It is intended to provide gu...

Quantum frames of reference

International Nuclear Information System (INIS)

Kaufherr, T.

1981-01-01

The idea that only relative variables have physical meaning came to be known as Mach's principle. Carrying over this idea to quantum theory, has led to the consideration of finite mass, macroscopic reference frames, relative to which all physical quantities are measured. During the process of measurement, a finite mass observer receives a kickback, and this reaction of the measuring device is not negligible in quantum theory because of the quantization of the action. Hence, the observer himself has to be included in the system that is being considered. Using this as the starting point, a number of thought experiments involving finite mass observers is discussed which have quantum uncertainties in their time or in their position. These thought experiments serve to elucidate in a qualitative way some of the difficulties involved, as well as pointing out a direction to take in seeking solutions to them. When the discussion is extended to include more than one observer, the question of the covariance of the theory immediately arises. Because none of the frames of reference should be preferred, the theory should be covariant. This demand expresses an equivalence principle which here is extended to include reference frames which are in quantum uncertainties relative to each other. Formulating the problem in terms of canonical variables, the ensueing free Hamiltonian contains vector and scalar potentials which represent the kick that the reference frame receives during measurement. These are essentially gravitational type potentials, resulting, as it were, from the extension of the equivalence principle into the quantum domain

The Arnot capacity increase project - An integrated boiler and turbine retrofit by Alstom - Implementation and operational experience

Energy Technology Data Exchange (ETDEWEB)

Davies, Mike; Stephen, Don; Rich, Glyn; Mills, Jeff; Allen, Steve

2010-09-15

In cooperation with South African utility giant Eskom, Alstom has undertaken an ambitious project to upgrade the six-unit Arnot Power Station. The objective was to retrofit major plant components in a cost effective manner in order to extend plant life and increase output. This paper will consider the implementation of the project, the challenges overcome and the operational experience subsequently gained. Lessons learned will be identified. Conclusions will be drawn concerning the effectiveness of a comprehensive feasibility study prior to project implementation and the ability of modern design and manufacturing techniques to retrofit older machines, thus releasing latent potential.

The Use of Reference Models in Business Process Renovation

Directory of Open Access Journals (Sweden)

Dejan Pajk

2010-01-01

Full Text Available Enterprise resource planning (ERP systems are often used by companies to automate and enhance their busi- ness processes. The capabilities of ERP systems can be described by best-practice reference models. The purpose of the article is to demonstrate the business process renovation approach with the use of reference models. Although the use of reference models brings many positive effects for business, they are still rarely used in Slovenian small and medium-sized compa- nies. The reasons for this may be found in the reference models themselves as well as in project implementation methodologies. In the article a reference model based on Microsoft Dynamics NAV is suggested. The reference model is designed using upgraded BPMN notation with additional business objects, which help to describe the models in more detail.

75 FR 39241 - Hooper Springs Project

Science.gov (United States)

2010-07-08

... DEPARTMENT OF ENERGY Bonneville Power Administration Hooper Springs Project AGENCY: Bonneville... (collectively referred to as the Hooper Springs Project). The new BPA substation would be called Hooper Springs... proposed project would address voltage stability and reliability concerns of two of BPA's full requirements...

Metadata, Cataloging, Digitization and Retrieval--Who's Doing What to Whom: The Colorado Digitization Project Experience.

Science.gov (United States)

Bishoff, Liz; Garrison, William A.

This paper describes the experiences of the Colorado Digitization Project (CDP) related to accessing a diverse set of primary resources held by many different cultural heritage institutions. The CDP is a collaborative initiative involving Colorado's archives, historical societies, libraries, and museums. The CDP's goal is to create a virtual…

A Laboratory Experiment, Based on the Maillard Reaction, Conducted as a Project in Introductory Statistics

Science.gov (United States)

Kravchuk, Olena; Elliott, Antony; Bhandari, Bhesh

2005-01-01

A simple laboratory experiment, based on the Maillard reaction, served as a project in Introductory Statistics for undergraduates in Food Science and Technology. By using the principles of randomization and replication and reflecting on the sources of variation in the experimental data, students reinforced the statistical concepts and techniques…

Dynamic Testing of the NASA Hypersonic Project Combined Cycle Engine Testbed for Mode Transition Experiments

Science.gov (United States)

2011-01-01

NASA is interested in developing technology that leads to more routine, safe, and affordable access to space. Access to space using airbreathing propulsion systems has potential to meet these objectives based on Airbreathing Access to Space (AAS) system studies. To this end, the NASA Fundamental Aeronautics Program (FAP) Hypersonic Project is conducting fundamental research on a Turbine Based Combined Cycle (TBCC) propulsion system. The TBCC being studied considers a dual flow-path inlet system. One flow-path includes variable geometry to regulate airflow to a turbine engine cycle. The turbine cycle provides propulsion from take-off to supersonic flight. The second flow-path supports a dual-mode scramjet (DMSJ) cycle which would be initiated at supersonic speed to further accelerate the vehicle to hypersonic speed. For a TBCC propulsion system to accelerate a vehicle from supersonic to hypersonic speed, a critical enabling technology is the ability to safely and effectively transition from the turbine to the DMSJ-referred to as mode transition. To experimentally test methods of mode transition, a Combined Cycle Engine (CCE) Large-scale Inlet testbed was designed with two flow paths-a low speed flow-path sized for a turbine cycle and a high speed flow-path designed for a DMSJ. This testbed system is identified as the CCE Large-Scale Inlet for Mode Transition studies (CCE-LIMX). The test plan for the CCE-LIMX in the NASA Glenn Research Center (GRC) 10- by 10-ft Supersonic Wind Tunnel (10x10 SWT) is segmented into multiple phases. The first phase is a matrix of inlet characterization (IC) tests to evaluate the inlet performance and establish the mode transition schedule. The second phase is a matrix of dynamic system identification (SysID) experiments designed to support closed-loop control development at mode transition schedule operating points for the CCE-LIMX. The third phase includes a direct demonstration of controlled mode transition using a closed loop control

Project brief of pre-contract in project management

International Nuclear Information System (INIS)

Mohd Jamil Hashim; Mohd Azmi Sidid Omar; Abdul Rahman Norazumin; Zakaria Dris; Abdul Murad Abu Bakar; Alwi Othman

2010-01-01

Project brief is a comprehensive document used in translating the user needs and requirement for the project implementation. This document is important for the designer as a main guidance towards establishing project details. Research shown that problem usually arises from not well-defined scope and needs by the user. With lack of information the designer tend to assume and interprets wrong translation. Other issues arise from project management are time, cost, budgetary, lack of communication and establishing quality management. Some ideas of improvement were gain by doing cross reference with JKR quality system management, workshop and brainstorming. It shows that an improvement of data collection system has to be integrating with some basic format details, drawings and declaration forms to be established. (author)

Exploring Education Professionals' Perceptions of the Changes in School/Classroom Climate, Students' Experiences, and Educators' Experiences as a Result of Implementing the Secret Kindness Agents Project

Science.gov (United States)

Pearson, Ferial G.

2017-01-01

This phenomenological study explored the perceptions of 23 educators as related to the implementation of the "Secret Kindness Agents Project." The methodology was comprised of a researcher-designed questionnaire to capture the essence of the participants' experiences with the project. A Conceptual Map developed by researchers at the…

Positive experiences of a vocational rehabilitation intervention for individuals on long-term sick leave, the Dirigo project: a qualitative study.

Science.gov (United States)

Andersén, Åsa; Ståhl, Christian; Anderzén, Ingrid; Kristiansson, Per; Larsson, Kjerstin

2017-10-10

The process of returning to work after long-term sick leave can sometimes be complex. Many factors, (e.g. cooperation between different authorities and the individual as well as individual factors such as health, emotional well-being and self-efficacy) may have an impact on an individual's ability to work. The aim of this study was to investigate clients' experiences with an individually tailored vocational rehabilitation, the Dirigo project, and encounters with professionals working on it. The Dirigo project was based on collaboration between rehabilitation authorities, individually tailored interventions and a motivational interviewing approach. A descriptive qualitative design was used with data collected through interviews. Fourteen individuals on long-term sick leave took part in individual semi-structured interviews. The interviews were analysed using content analysis. The analysis showed overall positive experience of methods and encounters with professionals in a vocational rehabilitation project. The positive experiences were based on four key factors: 1. Opportunities for receiving various dimensions of support. 2. Good overall treatment by the professionals. 3. Satisfaction with the working methods of the project, and 4. Opportunities for personal development. The main result showed that the clients had an overall positive experience of a vocational rehabilitation project and encounters with professionals who used motivational interviewing as a communication method. The overall positive experience indicated that their interactions with the different professionals may have affected their self-efficacy in general and in relation to transition to work. The knowledge is essential for the professionals working in the area of vocational rehabilitation. However, vocational rehabilitation interventions also need a societal approach to be able to offer clients opportunities for job training and real jobs.

Project Manager Performance and the Decision to Backsource the Project Management Office

Science.gov (United States)

Lively, William R.

2014-01-01

This paper reviews a management decision of an Information Technology Outsource (ITO) provider to backshore the management oversight of its Project Management Office (PMO) after only one year of offshore operations. Governance is a term used in project management to refer to management oversight. The review is a quantitative analysis of existing…

Virtual reality in decommissioning projects: experiences, lessons learned and future plans

International Nuclear Information System (INIS)

Rindahl, G.; Mark, N.K.F.; Meyer, G.

2006-01-01

The work on Virtual Reality (VR) tools for decommissioning planning, dose estimation and work management started at the Norwegian Institute for Energy Technology (IFE) in 1999 in the VR dose project with Japan Nuclear Cycle development institute (JNC), now JAEA. The main aim of this effort has been to help minimize workers' radiation exposure, as well as help to achieve more efficient use of human resources. VR dose is now used in the decommissioning of one of JNC's reactors, the Fugen Nuclear Power Station. This VR decommissioning project has later resulted in a series of projects and applications. In addition to decommissioning, IFE also put great focus on two other branches of VR tools, namely tools for knowledge management, training and education in operating facilities and tools for control room design. During the last years, this work, beginning at different ends, has been converging more and more towards VR technology for use through out the life cycle of a facility. A VR training simulator for a refuelling machine of the Leningrad NPP (LNPP) developed in cooperation with the Russian Research Centre Kurchatov Institute (RRC KI) is now planned to be used in connection with the decommissioning of the three intact reactors at Chernobyl in Ukraine. In this paper we describe experiences from use of VR in decommissioning processes, as well as results from bringing the VR technology initially developed for planned or productive facilities into the decommissioning toolbox. (author)

[Telemedicine in Bolivia: RAFT-Altiplano project, experiences, future prospects, and recommendations].

Science.gov (United States)

Vargas, Alejandro; Ugalde, Miguel; Vargas, Reynaldo; Narvaez, Ramiro; Geissbuhler, Antoine

2014-01-01

The objective of the RAFT-Altiplano project (RAFT: Réseau en Afrique Francophone pour la Télémédecine, or African Francophone Telemedicine Network) is to evaluate the viability, potential, and risks of implementing and developing a telemedicine network in the context of a developing country-specifically, the Altiplano region of Bolivia-to improve access to medical care and continuing education in a rural area. The activities described in this report took place between 2011 and 2013. Digital telemedicine equipment was donated to the health centers and a Microsoft®-based platform capable of integration with other technologies (using standardized formats) was developed to manage documents and clinical content electronically. Health professionals were trained in teleconsultation and the teleconsultation workflow was designed. The tele-education system used is Dudal, which requires only a small bandwidth. After three years of implementation, an organized working structure of teleconsultation and tele-education tools, adapted to the Latin American context, is now in place and connections have been established with hospitals, institutions, and health centers. The project has improved access to specialized medical care in remote health centers and third-level hospitals in urban areas, and it has become the foundation for development of the national project "TeleSalud for Bolivia" promoted by the Ministry of Health, which involves use of the new Bolivian satellite, Túpac Katari. It is viable to develop and set up telemedicine tools to serve the population in remote regions of Bolivia when they are made available to government and municipal health institutions and communication between them and the health centers takes place in a coordinated manner. The sharing of experiences, challenges, and risks encountered is very useful in designing and implementing the telemedicine project "TeleSalud for Bolivia" on a national scale.

Project W-151 Tank 101-AZ Waste Retrieval System Year 2000 Compliance Assessment Project Plan

International Nuclear Information System (INIS)

BUSSELL, J.H.

1999-01-01

This document contains a limited assessment of Year 2000 compliance for Project W-151. Additional information is provided as a road map to project documents and other references that may be used to verify Year 2000 compliance

The Influence of the Tri-reference Points on Fairness and Satisfaction Perception

Directory of Open Access Journals (Sweden)

Lei Zhao

2018-02-01

Full Text Available We examined the influence of three reference points (minimum requirements [MR], the status quo [SQ], and goal [G] proposed by the tri-reference point (TRP theory on fairness and satisfaction perceptions of pay in three laboratory experiments. To test the effects, we manipulated these three reference points both implicitly (Experiment 1 and explicitly (Experiments 2 and 3. We also provided the information of the salary offered to a peer person that was lower than, equal to, or higher than the salary offer to the participant. As hypothesized, the results demonstrated the important role of these reference points in judging the fairness of and satisfaction with pay when they were explicitly set (an interaction between reference points and social comparison in Experiments 2 and 3, but not in Experiment 1. Participants altered their judgments when the salary was in different regions. When the salary was below MR, participants perceived very low fairness and satisfaction, even when the offer was equal to/exceeded others. When the salary was above G, participants perceived much higher fairness and satisfaction, even with disadvantageous inequality. Participants were more impacted when they were explicitly instructed of the reference points (Experiments 2 and 3 than when they were not (Experiment 1. Moreover, MR appeared to be the most important, followed by G. A Salary below MR was judged as very unacceptable, with very low fairness and satisfaction ratings.

A time projection chamber for the crystal barrel experiment at ELSA

Energy Technology Data Exchange (ETDEWEB)

Schaab, Dimitri; Ball, Markus; Beck, Reinhard; Ketzer, Bernhard [HISKP, Bonn University (Germany); Collaboration: CBELSA/TAPS-Collaboration

2015-07-01

The CBELSA/TAPS experiment focuses on baryon spectroscopy by photoproduction processes off nucleons. For this purpose the experiment consists of an inner detector and an outer detector. The outer Crystal Barrel detector mainly measures photons from the decaying resonance. For charged particle identification and in order to obtain their direction, the Inner Detector consists of three layers of scintillating fibers. This inner detector will be replaced by a Time Projection Chamber (TPC). It offers improved track reconstruction capabilities, a robust pattern recognition and, if operated in a magnetic field, an excellent momentum resolution. Moreover, one obtains a particle identification of charged particles via the specific energy loss. A TPC has been developed for the FOPI experiment which also fits to the Crystal Barrel dimensions. It operates in continuous mode using Gas Electron Multipliers (GEM) as pre-amplification stage. For the TPC detector the calibration of the detector is crucial since parameters such as drift velocity or field inhomogenities have a direct impact on the detector performance. For the CBELSA TPC a calibration system is planned, which is based on the T2K calibration system. Here, the photoelectric effect is used to release electrons at well-known positions on the cathode, which drift towards the readout plane and show the integrated spatial distortions.

Collection and sharing of data and experience from EC-funded decommissioning projects

International Nuclear Information System (INIS)

Pflugrad, K.; Colquhoun, A.P.; Schreck, G.; Huske, M.; Petrasch, P.; Tuenckens, L.R.J.

1999-01-01

The European Commission's Fourth Framework Programme (1994-1998) on Nuclear Fission Safety includes the funding of projects relevant to the decommissioning of nuclear installations. The objectives of the programme for decommissioning are to continue the development of technology (a) to collect and analyse relevant data (b) to test and evaluate strategies and techniques and to stimulate the exchange of information and experience. Objective (b) involves related projects aimed at collecting and analysing data from past, current and future EC programmes and making them understandable and readily available in databases as well as studying how these and other databases might be integrated in a decommissioning strategic planning tool (SPT). This aims to assist EU organizations in making strategic choices for optimizing decommissioning programmes. This paper gives an update on database work, a progress report on the development of an EU access network and work on the standardization of cost item definitions. Progress on the SPT study is reviewed. (author)

Building the feedback system of project experience,and expediting the scientific development of nuclear power construction

International Nuclear Information System (INIS)

Zhou Hai

2009-01-01

In accord with the status of the energy structure and electric power demand in China, the Chinese government has made the strategy of developing nuclear power actively. Confronting the good chance for nuclear power development, the writer takes the Fangjiashan nuclear power project as an example, puts forward a viewpoint that establishing the nuclear power project experience summarization and feedback system is an urgent need for expediting the scientific development of nuclear power. It also demonstrates the necessity, feasibility, and detailed measures, etc. (authors)

Managing clinical improvement projects.

Science.gov (United States)

Phillips, Joanna; Simmonds, Lorraine

This paper, the second of a three-part series looking at change management tools, provides a practical guide on how to use common project management principles in practice. Much of the literature on project management focuses on the business arena, with little reference to clinical settings. Identifying this literature and understanding its relevance to managing projects in healthcare can be difficult. This article provides a practical guide to identifying the key principles of good project management and applying these in health settings.

From a Distance: Robust Reference Service via Instant Messaging

Science.gov (United States)

Meulemans, Yvonne Nalani; Carr, Allison; Ly, Pearl

2010-01-01

Reference service via instant messaging (IM) has significant potential to benefit distance learners. There has been wide experimentation with IM to expand reference services in libraries across the US, with mixed results. Concern has been expressed that IM cannot provide the same reference experience as face-to-face interactions. One academic…

Experience of valorization projects ISTC for laser technologies

Science.gov (United States)

Sartory, A. V.; Stepennov, D. B.; Vlasova, E. Y.; Pokrovsky, K. K.

2002-04-01

Application of the achievements of the ISTC projects is one of the main problems being solved to achieve one of the basic goals of the ISTC, namely, to adapt Russian scientists to conditions of developing market economy in Russia. The present report is aimed at rendering of promotional services for ISTC project teams in the context of the program of projects outcomes valorization.

Conditions, factors and criteria for successful project implementation: generalization of experience of project management

Directory of Open Access Journals (Sweden)

Feraru Galina Sergeevna

2014-11-01

Full Text Available The article addresses issues characterizing features of project management contributing to their competitive advantage; shows the factors and criteria of success of projects and the main reasons for their failures, making the failed efforts of developers to create projects.

MANAGING CONFLICT IN ENGINEERING PROJECTS: NEW ZEALAND EXPERIENCES

Directory of Open Access Journals (Sweden)

Nicola Naismith

2016-07-01

Full Text Available There is a wealth of knowledge concerning conflict management and its resolution in the workplace, however there is a dearth of information relating to conflict management and its resolution in engineering project management. This paper set out to examine the reality of conflict management in engineering project management in New Zealand. This was achieved through a review of credible literature sources and the completion of a pilot study to gain subject matter expert perspectives. The research suggests that conflicts can be destructive, resulting in anxiety and strong emotional responses leading to reflexive reactions including avoidance, aggression, fight, hostility and a breakdown in communications and relationships. Findings indicate that managing a project structure is synonymous with handling conflict and these disagreements can be detrimental to the success of a project. The initial results suggest that a number of factors act as drivers of conflict in engineering projects in New Zealand. These drivers are: power, personality, group dynamics and organisation culture. The conflict resolution tools cited as being widely used for engineering projects are collaboration and negotiation. The paper also offers recommendations for future research.

Reference moderator calculated performance for the LANSCE upgrade project

International Nuclear Information System (INIS)

Ferguson, P.D.; Russell, G.J.; Pitcher, E.J.

1995-01-01

The authors have calculated the performance of five moderators of interest to the LANSCE upgrade project. Coupled and decoupled light water and liquid hydrogen moderators in flux-trap geometry surrounded by a neutronically infinite heavy-water cooled beryllium reflector have been studied. Time and energy spectra, as well as semi-empirical fits to the data, are presented. The data has been made available to aid the instrument design and moderator selection process

New tools for scientific learning in the EduSeis project: the e-learning experiment

Directory of Open Access Journals (Sweden)

A. Zollo

2007-06-01

Full Text Available The Educational Seismological Project (EduSeis is a scientific and educational project, the main aim of which is the development and implementation of new teaching methodologies in Earth Sciences, using seismology as a vehicle for scientific learning and awareness of earthquake risk. Within this framework, we have recently been experimenting with new learning and information approaches that are mainly aimed at a high school audience. In particular, we have designed, implemented and tested a model of an e-learning environment in a high school located in the surroundings of the Mt. Vesuvius volcano. The proposed e-learning model is built on the EduSeis concepts and educational materials (web-oriented, and is based on computer-supported collaborative learning. Ten teachers from different disciplines and fifty students at the I.T.I.S. “Majorana” technical high school (Naples have been taking part in a cooperative e-learning experiment in which the students have been working in small groups (communities. The learning process is assisted and supervised by the teachers. The evaluation of the results from this cooperative e-learning experiment has provided useful insights into the content and didactic value of the EduSeis modules and activities. The use of network utilities and the “Learning Community” approach promoted the exchange of ideas and expertises between students and teachers and allowed a new approach to the seismology teaching through a multidisciplinary study.

Reference stratigraphy and rock properties for the Waste Isolation Pilot Plant (WIPP) project

International Nuclear Information System (INIS)

Krieg, R.D.

1984-01-01

A stratigraphic description of the country rock near the working horizon at the Waste Isolation Pilot Plant (WIPP) is presented along with a set of mechanical and thermal properties of materials involved. Data from 41 cores and shafts are examined. The entire stratigraphic section is found to vary in elevation in a regular manner, but individual layer thicknesses and relative separation between layers are found to have no statistically significant variation over the one mile north to south extent of the working horizon. The stratigraphic description is taken to be relative to the local elevation of Anhydrite b. The material properties have been updated slightly from those in the July 1981 Reference Stratigraphy. This reference stratigraphy/properties document is intended primarily for use in thermal/structural analyses. This document supercedes the July 1981 stratigraphy/properties document. 31 references, 7 figures

Photon number projection using non-number-resolving detectors

International Nuclear Information System (INIS)

Rohde, Peter P; Webb, James G; Huntington, Elanor H; Ralph, Timothy C

2007-01-01

Number-resolving photo-detection is necessary for many quantum optics experiments, especially in the application of entangled state preparation. Several schemes have been proposed for approximating number-resolving photo-detection using non-number-resolving detectors. Such techniques include multi-port detection and time-division multiplexing. We provide a detailed analysis and comparison of different number-resolving detection schemes, with a view to creating a useful reference for experimentalists. We show that the ideal architecture for projective measurements is a function of the detector's dark count and efficiency parameters. We also describe a process for selecting an appropriate topology given actual experimental component parameters

Financial structure of Korea Gas Corporation's LNG projects

International Nuclear Information System (INIS)

Jeongsoo Ko

1991-01-01

When an Indonesian LNG tanker arrived in Korea for the first time in October 1986, Korea became the seventh LNG-consuming nation in the world. The imported LNG has contributed greatly to solving pollution problems and ensuring a stable supply of energy to Korea through the diversification of energy sources. So far, the LNG supply has been confined to the Metropolitan area. The Korea Gas Corporation now plans to expand the LNG supply to cover the entire nation. This paper introduces the experience and future plan of Korea's LNG projects with a special reference to their financial structure

The impact of stigma, experience, and group referent on HIV risk assessments and HIV testing intentions in Namibia.

Science.gov (United States)

Smith, Rachel A; Morrison, Daniel

2006-11-01

People often perceive risks for others and themselves differently. This study examines whether personal beliefs about HIV and experience with those living with HIV influence personal risk assessments of contracting HIV in an interview sample of northern Namibians (N=400), but not others' assessments as explained by singular-distribution theory [Klar, Medding, & Sarel (1996). Nonunique invulnerability: Singular versus distributional probabilities and unrealistic optimism in comparative risk judgments. Organizational Behavior and Human Decision Processes, 67, 229-245]. Findings indicate that personal risk perceptions decrease with more HIV stigmatizing beliefs and increase with greater experience, but that those characteristics had no impact on assessments for others' risk. The study also examines whether the size and characteristics of the referent group, peers and the general Namibian population, influence others' risk assessments. Optimistic biases for personal risk versus others' risk appear with the highest discrepancy emerging between personal and general population risk assessments. Further, we found that personal risk perceptions did not mediate the relationship between personal characteristics, beliefs and experiences, and intentions to seek HIV testing.

Biomethanization of tannery waste: An industrial experiment: Demonstration project. Biomethanisation de residus de tannerie: Une experience industrielle: Projet de demonstration

Energy Technology Data Exchange (ETDEWEB)

Aloy, M.; Mermet, R.; Sanejouand, J.

1988-01-01

The tanning and leather dressing industry produces large amounts of waste products including which can be placed in three categories: unrtanned waste, tanned waste, and liquid waste. Both untanned and liquid waste have a high organic content (proteins and fats) and their humidity levels are such that they are readily degraded by methanic fermentation. The results of the experiments confirm the technical feasibility of the project and indicate the economic limits of this type of plant. 14 figs.

The integrated project as a learning experience

Directory of Open Access Journals (Sweden)

Maria Angeles Antequera

2012-03-01

Full Text Available Florida is a higher education centre specialising in technical and business training. Postgraduate programs, university qualifications, vocational training, secondary education, further education, occupational training and languages are taught at Florida. An educational model in accordance with the demands of the European Higher Education Area has been designed, focussing on teaching for professional competencies. We have chosen to use a methodology which promotes the development of skills and abilities, it promotes participation and it is student-centric as s/he must look for knowledge him/herself thus connecting the educational and the real world. In the different university degrees taught in our centre, each year the student carries out a project set in a real context which integrates specific competencies from the course subject and develops transversal competencies associated with the project which are the purpose of planning and progressive learning: team work, effective communication, conflict resolution, leadership skills, innovation and creativity. The IP counts for 25% of each course in terms of objectives, scheduling and final evaluation. The project grade is an individual grade for each student and is the same for all subjects which form part of the project.

Positive experiences of a vocational rehabilitation intervention for individuals on long-term sick leave, the Dirigo project: a qualitative study

Directory of Open Access Journals (Sweden)

Åsa Andersén

2017-10-01

Full Text Available Abstract Background The process of returning to work after long-term sick leave can sometimes be complex. Many factors, (e.g. cooperation between different authorities and the individual as well as individual factors such as health, emotional well-being and self-efficacy may have an impact on an individual’s ability to work. The aim of this study was to investigate clients’ experiences with an individually tailored vocational rehabilitation, the Dirigo project, and encounters with professionals working on it. The Dirigo project was based on collaboration between rehabilitation authorities, individually tailored interventions and a motivational interviewing approach. Methods A descriptive qualitative design was used with data collected through interviews. Fourteen individuals on long-term sick leave took part in individual semi-structured interviews. The interviews were analysed using content analysis. Results The analysis showed overall positive experience of methods and encounters with professionals in a vocational rehabilitation project. The positive experiences were based on four key factors: 1. Opportunities for receiving various dimensions of support. 2. Good overall treatment by the professionals. 3. Satisfaction with the working methods of the project, and 4. Opportunities for personal development. Conclusions The main result showed that the clients had an overall positive experience of a vocational rehabilitation project and encounters with professionals who used motivational interviewing as a communication method. The overall positive experience indicated that their interactions with the different professionals may have affected their self-efficacy in general and in relation to transition to work. The knowledge is essential for the professionals working in the area of vocational rehabilitation. However, vocational rehabilitation interventions also need a societal approach to be able to offer clients opportunities for job training

Structuring a mega-project

Energy Technology Data Exchange (ETDEWEB)

Kutryk, T. [Husky Oil Operations Ltd., Calgary, AB (Canada)

2004-07-01

This paper presented an overview of mega-project management. Issues concerning scope, cost and schedule were discussed, with reference to the idea that a choice must be made from the outset as to which of the 3 is a main priority. The importance of preparation and the development of a fully resourced plan was emphasized. The use of the parametric 4-D model was discussed. Lessons that the construction industry may learn from manufacturers were presented along with issues of contract development and the role and importance of the project manager. Issues concerning performance measurement were reviewed, including lagging indicators. Project division factors were also discussed, with reference to data lags, naturally concurrent processes and over the fence units. A case study of Walmart was presented. Project design packages and long lead time items were discussed, as were issues concerning human resources. Functional units were examined in relation to zones of influence and unit integration. Various combinations of zones of influence were presented. Issues concerning span of control and varying relationships within a project were discussed. It was emphasized that great deeds can be accomplished by attracting the best people. tabs., figs.

7 CFR 3402.12 - Project summary.

Science.gov (United States)

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Project summary. 3402.12 Section 3402.12 Agriculture... FELLOWSHIP GRANTS PROGRAM Preparation of an Application § 3402.12 Project summary. Using the Project Summary.... The summary should not include any reference to the specific number of fellowships requested. The...

Energy management at public-private partnerships. A reference model for energy efficient building construction projects; Energiemanagement bei Oeffentlich-Privaten Partnerschaften. Ein Referenzmodell fuer energieeffiziente Hochbauprojekte

Energy Technology Data Exchange (ETDEWEB)

Heidel, Robin

2013-04-01

The enhancement of the energy efficiency reduces the life cycle costs of real estates, and is an important component in achieving global climate goals. In the construction and operation of public building constructions, the state has to assume the function of a role model. Due to the budgetary position of the public authority continuously in deficit, the alternative form of procurement public-private partnerships will become increasingly important. The author of the contribution under consideration reports on the design of building construction projects of public-private partnerships in order to guarantee an energy efficient operation. A reference model with process descriptions for the single phases of the project is developed. The author describes the possible benefit of this model by means of an application example.

Use of Simulation in Nursing Education: Initial Experiences on a European Union Lifelong Learning Programme--Leonardo Da Vinci Project

Science.gov (United States)

Terzioglu, Fusun; Tuna, Zahide; Duygulu, Sergul; Boztepe, Handan; Kapucu, Sevgisun; Ozdemir, Leyla; Akdemir, Nuran; Kocoglu, Deniz; Alinier, Guillaume; Festini, Filippo

2013-01-01

Aim: The aim of this paper is to share the initial experiences on a European Union (EU) Lifelong Learning Programme Leonardo Da Vinci Transfer of Innovation Project related to the use of simulation-based learning with nursing students from Turkey. The project started at the end of the 2010 involving 7 partners from 3 different countries including…

Assessing the Potential of Social Networks as a Means for Information Diffusion the Weatherization Experiences (WE) Project.

Energy Technology Data Exchange (ETDEWEB)

Rose, Erin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hawkins, Beth A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-04-01

In April 2009, U.S. Department of Energy (DOE) formally tasked Oak Ridge National Laboratory (ORNL) with conducting two impact and process evaluations of DOE’s Weatherization Assistance Program (WAP), known as the retrospective and American Recovery and Reinvestment Act of 2009 (ARRA) period evaluations, respectively. The former focused on WAP Program Year (PY) 2008, which covers the period from April 2008 to June 2009. The latter focused on PY 2010. This report presents in-depth analyses from ORNL’s social network study, the Weatherization Experiences (WE) Project, an exploratory study conducted as part of the ARRA period WAP evaluation. The WE Project explored the potential for WAP recipients and staff to influence energy savings beyond their homes and day jobs. Several studies conducted through ORNL’s evaluation of WAP found that the program has the ability to profoundly impact the lives of the people it serves (Tonn et al. 2014b). Recipients of WAP provided statements ranging from the newfound ability to pay utility bills and prescription medication to reduced emergency department visits for asthma and medical conditions associated with thermal stress. Through this exploratory research project, the stories of hundreds of weatherization recipients and providers were documented. The WE Project was designed to further investigate whether or not shared experiences with weatherization have the power to stimulate home energy saving action within an individual’s social network.

Biological Parameters and Molecular Markers of Clone CL Brener - The Reference Organism of the Trypanosoma cruzi Genome Project

Directory of Open Access Journals (Sweden)

Bianca Zingales

1997-11-01

Full Text Available Clone CL Brener is the reference organism used in the Trypanosoma cruzi Genome Project. Some biological parameters of CL Brener were determined: (a the doubling time of epimastigote forms cultured in liver infusion-tryptose (LIT medium at 28oC is 58±13 hr; (b differentiation of epimastigotes to metacyclic trypomastigotes is obtained by incubation in LIT-20% Grace´s medium; (c trypomastigotes infect mammalian cultured cells and perform the complete intracellular cycle at 33 and 37oC; (d blood forms are highly infective to mice; (e blood forms are susceptible to nifurtimox and benznidazole. The molecular typing of CL Brener has been determined: (a isoenzymatic profiles are characteristic of zymodeme ZB; (b PCR amplification of a 24Sa ribosomal RNA sequence indicates it belongs to T. cruzi lineage 1; (c schizodeme, randomly amplified polymorphic DNA (RAPD and DNA fingerprinting analyses were performed

Life Cycle Management for an Investment Project in Cluj-Salaj Area, Romania

Directory of Open Access Journals (Sweden)

Vasile Iuliu CIOMOŞ

2011-02-01

Full Text Available The Project Life Cycle refers to a logical sequence of activities to accomplish the project’s goals or objectives. Regardless of scope or complexity, any project goes through a series of stages during its life. Authors’ experience in preparing and implementing investment projects in the water sector has led to several conclusions: there is first an identification phase, in which the outputs and critical success factors are defined, followed by a planning phase, characterized by breaking down the project into smaller tasks, an execution phase, in which the project plan is executed, and lastly a completion phase, that marks the closure and exit of the project. Investment project activities must be grouped into phases because by doing so, the project management and the core team can efficiently plan and organize resources for each activity, and also objectively measure achievement of the goals. This paper introduces several issues related to the Project Cycle Management for a large local infrastructure investment project in the Cluj- Sălaj area, Romania. Successfully managing the project cycle and making timely decisions at every stage (identification, planning, execution and sustainability require the Project Management Unit from the Cluj-Sălaj Water Company to constantly understand and adapt to strategic considerations, both external and internal.

FOREIGN EXPERIENCE OF THE USE OF "MINECRAFT: EDUCATION EDITION" IN PROJECT ACTIVITY

Directory of Open Access Journals (Sweden)

Konevshchynska O.

2017-12-01

Full Text Available The relevance of the rapid development of Internet technologies in today's digital society, causing rapid changes in education is substantiated in the article. A thorough analysis of the foreign experience of using the educational version of "MINECRAFT: EDUCATION EDITION" in the project activity has been carried out. Internet sources, psychological-pedagogical and educational-methodical literature on the research problem are analyzed. The main educational trends, including remote and mobile learning, MOOC, supplemented reality, cloud LMS, personalization, BigData, gamification, which change the content of education and its impact on quality are named. It is proved that the use of gaming models and techniques for educational purposes can have a positive effect on the effectiveness of children teaching. The content of the sections and the main directions of using the educational platform in the educational process and the project activity of the students and teachers are considered. The results of joint work of children in mathematics, language and literature, history and geography are presented. The important aspects that are necessary in the information society are the cooperation, self-study and effective communication of subjects of the educational process for the implementation of project-oriented, educational-cognitive and innovative activities in educational practice. A promising area for further research is the design of Minecraft: Education Edition game scenarios methodology for the further implementation in domestic educational practice.

Collaborative learning environments and collective creation in 3 weeks bside project experience

Directory of Open Access Journals (Sweden)

Carlos Javier Rodríguez Sánchez

2016-07-01

Full Text Available This  paper proposes  a  socio-critical review  and  reflection  related to collaborative learning environment as pedagogical agent and its relationship with artistic-practice communities of collective creativity. The main goal of this research is to introduce the case study 3 weeks bside project experience (3WBPE, from now on. Through participatory action research and the analysis of different concepts and their practical and theoretical aspects. In the framework of an education self-manage- ment development universe, the project pro- cess is based on a collaborative learning. It is focused on the constructions of a common discourse about the idea of territory that is represented in a publication and site specific exhibition. 3WBPE allowed setting up stanc- es that suggest a social interaction transfer related to construction of belong, participa- tion and transformation environment, ques- tion a teacher role or collective creation of a project, emphasizing the importance of pro- cess as a goal, beyond of culture artifact pro- ductions. It was dealt with dialog structures, where a social harmony supposed a personal and common reflection space about author’s stance, nigh socio-culture environments and the bond within the education, arts and visu- al culture focused in the horizontal and flexi- ble work capacity, that proposes a collabora- tive learning environment settings.

Reducing failures rate within the project documentation using Building Information Modelling, especially Level of Development

Directory of Open Access Journals (Sweden)

Prušková Kristýna

2018-01-01

Full Text Available Paper´s focus is on differences between traditional modelling in 2D software and modelling within the BIM technology. Research uncovers failures connected to the traditional way of designing and construction of project documentation. There are revealed and shown mismatches within the project documentation. Solution within the Building information modelling Technology is outlined. As a reference, there is used experience with design of specific building in both ways of construction of project documentation: in the way of traditional modelling and in the way when using BIM technology, especially using Level of Development. Output of this paper is pointing to benefits of using advanced technology in building design, thus Building Information Modelling, especially Level of Development, which leads to reducing failures rate within the project documentation.

Reference-dependent risk sensitivity as rational inference.

Science.gov (United States)

Denrell, Jerker C

2015-07-01

Existing explanations of reference-dependent risk sensitivity attribute it to cognitive imperfections and heuristic choice processes. This article shows that behavior consistent with an S-shaped value function could be an implication of rational inferences about the expected values of alternatives. Theoretically, I demonstrate that even a risk-neutral Bayesian decision maker, who is uncertain about the reliability of observations, should use variability in observed outcomes as a predictor of low expected value for outcomes above a reference level, and as a predictor of high expected value for outcomes below a reference level. Empirically, I show that combining past outcomes using an S-shaped value function leads to accurate predictions about future values. The theory also offers a rationale for why risk sensitivity consistent with an inverse S-shaped value function should occur in experiments on decisions from experience with binary payoff distributions. (c) 2015 APA, all rights reserved).

The nuclear criticality information system's project to archive unpublished critical experiment data

International Nuclear Information System (INIS)

Koponen, B.L.; Doherty, A.L.; Clayton, E.D.

1991-01-01

Critical experiment facilities produced a large amount of important data during the past forty-five years. However, much useful data remains unpublished. The unpublished material exists in the form of experimenters' logbooks, notes, photographs, material descriptions, etc. These data could be important for computer code validation, understanding the physics of criticality, facility design, or for setting process limits. In the past, criticality specialists have been able to obtain unpublished details by direct contact with the experimenters. The closure of facilities and the loss of personnel is likely to lead to the loss of the facility records unless an effort is made to ensure that the records are preserved. It has been recognized for some time that the unpublished records of critical experiment facilities comprise a valuable resource, thus the Nuclear Criticality Information System (NCIS) is working to ensure that the records are preserved and made available via NCIS. As a first step in the archiving project, we identified criteria to help judge which series of experiments should be considered for archiving. Data that are used for validating calculations or the basis for subcritical limits in standards, handbooks, and guides are of particular importance. In this paper we will discuss the criteria for archiving, the priority list of experiments for archiving, and progress in developing an NCIS image database using current CD-ROM technology. (Author)

Service-learning and learning communities: two innovative school projects that are mutually enriched

Directory of Open Access Journals (Sweden)

Carmen ÁLVAREZ ÁLVAREZ

2015-12-01

Full Text Available This article reflects on the interrelationships that exist between two educational projects of today: service-learning (ApS and learning communities (CdA. The ApS is an educational methodology applied worldwide where a single project combines a learning based on experience with the implementation of a service to the community. CdA is a school transformation project to achieve that the information society does not exclude any person, constituting a reality in more than one hundred and ninety schools in Spain and Latin America. Between the two, it is possible to show differences, especially in what refers to its theoretical substrates, but in actual teaching practice in schools there is some harmony, particularly in the so closely that they cultivate both projects with the school community. Therefore, we conclude that service-learning and learning communities can occur as two innovative and relevant today projects which can be mutually enriching: because for both the approach school-community-environment and volunteering is essential.

X-Culture: An International Project in the Light of Experience Gained over the Years (2010-2016

Directory of Open Access Journals (Sweden)

József Poór

2016-12-01

Full Text Available The X-Culture project is an innovative modern form of experiential learning predominantly in International Management and International Business. Although experiential learning has some advantages, namely, developing cross-cultural competencies, cultural intelligence, intercultural communication and management skills, differences in personality or conditions also arise as a downside. X-Culture has been evolving throughout the years since 2010 when the original objective was to supplement the theoretical material and in-class teaching. Nowadays more than 4000 master, bachelor and MBA students, mostly of management and economics from more than 37 countries, take part in the project every semester. X-Culture is aimed at students of International Business college courses and training programs with the task of writing a business report or consulting propositions by offering business solutions for a hypothetical client.  This paper outlines the theoretical background of the X-culture project. It describes the evolution and practical and theoretical experience of this project since 2010.

A First Look at the Upcoming SISO Space Reference FOM

Science.gov (United States)

Mueller, Bjorn; Crues, Edwin Z.; Dexter, Dan; Garro, Alfredo; Skuratovskiy, Anton; Vankov, Alexander

2016-01-01

Spaceflight is difficult, dangerous and expensive; human spaceflight even more so. In order to mitigate some of the danger and expense, professionals in the space domain have relied, and continue to rely, on computer simulation. Simulation is used at every level including concept, design, analysis, construction, testing, training and ultimately flight. As space systems have grown more complex, new simulation technologies have been developed, adopted and applied. Distributed simulation is one those technologies. Distributed simulation provides a base technology for segmenting these complex space systems into smaller, and usually simpler, component systems or subsystems. This segmentation also supports the separation of responsibilities between participating organizations. This segmentation is particularly useful for complex space systems like the International Space Station (ISS), which is composed of many elements from many nations along with visiting vehicles from many nations. This is likely to be the case for future human space exploration activities. Over the years, a number of distributed simulations have been built within the space domain. While many use the High Level Architecture (HLA) to provide the infrastructure for interoperability, HLA without a Federation Object Model (FOM) is insufficient by itself to insure interoperability. As a result, the Simulation Interoperability Standards Organization (SISO) is developing a Space Reference FOM. The Space Reference FOM Product Development Group is composed of members from several countries. They contribute experiences from projects within NASA, ESA and other organizations and represent government, academia and industry. The initial version of the Space Reference FOM is focusing on time and space and will provide the following: (i) a flexible positioning system using reference frames for arbitrary bodies in space, (ii) a naming conventions for well-known reference frames, (iii) definitions of common time scales

Experiences of CO2 domestic projects in the world

International Nuclear Information System (INIS)

Dominicis, A. de

2005-09-01

The Kyoto protocol provides for two projects allowing the valorization, by actives carbon, the greenhouse gases emission reduction. In addition to theses two projects, other mechanisms more local are developing. If these mechanisms goal is the same (to incentive the implementation of projects of emissions reduction), the implementation is often different. This evaluation takes stock on this new domestic projects. (A.L.B.)

Representing Spatial Layout According to Intrinsic Frames of Reference.

Science.gov (United States)

Xie, Chaoxiang; Li, Shiyi; Tao, Weidong; Wei, Yiping; Sun, Hong-Jin

2017-01-01

Mou and McNamara have suggested that object locations are represented according to intrinsic reference frames. In three experiments, we investigated the limitations of intrinsic reference frames as a mean to represent object locations in spatial memory. Participants learned the locations of seven or eight common objects in a rectangular room and then made judgments of relative direction based on their memory of the layout. The results of all experiments showed that when all objects were positioned regularly, judgments of relative direction were faster or more accurate for novel headings that were aligned with the primary intrinsic structure than for other novel headings; however, when one irregularly positioned object was added to the layout, this advantage was eliminated. The experiments further indicated that with a single view at study, participants could represent the layout from either an egocentric orientation or a different orientation, according to experimental instructions. Together, these results suggest that environmental reference frames and intrinsic axes can influence performance for novel headings, but their role in spatial memory depends on egocentric experience, layout regularity, and instructions.

Geoscience Education Research Project: Student Benefits and Effective Design of a Course-Based Undergraduate Research Experience

Science.gov (United States)

Kortz, Karen M.; van der Hoeven Kraft, Katrien J.

2016-01-01

Undergraduate research has been shown to be an effective practice for learning science. While this is a popular discussion topic, there are few full examples in the literature for introductory-level students. This paper describes the Geoscience Education Research Project, an innovative course-based research experience designed for…

The Role of Nurses in E-Health: The MobiGuide Project Experience.

Science.gov (United States)

Parimbelli, Enea; Sacchi, Lucia; Budasu, Roxana; Napolitano, Carlo; Peleg, Mor; Quaglini, Silvana

2016-01-01

Leveraging the experience of the European project MobiGuide, this paper elaborates on the nurses' role in developing, delivering and evaluating e-health based services. We focus on the home monitoring of atrial fibrillation. Patients enrolled in our study are provided with a smartphone and an ECG sensor, and receive recommendations, reminders and alerts concerning medications and measurements that they should perform through a mobile decision support system that is constantly updated by a backend system. Patients' data are sent to health care personnel that may visualize them, and act accordingly. Nurses play a central role in such setting. After being involved in the design of the caregiver interface, they are responsible for the patients' enrollment phase (which includes patients' training), for the daily checking of incoming data, for the triage of patients' complaints, and for the final phase of the study where patients are interviewed about their experience with the system.

Program management plan for the Molten Salt Reactor Experiment Remediation Project at Oak Ridge National Laboratory, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

1996-09-01

The primary mission of the Molten Salt Reactor Experiment (MSRE) Remediation Project is to effectively implement the risk-reduction strategies and technical plans to stabilize and prevent further migration of uranium within the MSRE facility, remove the uranium and fuel salts from the system, and dispose of the fuel and flush salts by storage in appropriate depositories to bring the facility to a surveillance and maintenance condition before decontamination and decommissioning. This Project Management Plan (PMP) for the MSRE Remediation Project details project purpose; technical objectives, milestones, and cost objectives; work plan; work breakdown structure (WBS); schedule; management organization and responsibilities; project management performance measurement planning, and control; conduct of operations; configuration management; environmental, safety, and health compliance; quality assurance; operational readiness reviews; and training

Program management plan for the Molten Salt Reactor Experiment Remediation Project at Oak Ridge National Laboratory, Oak Ridge, Tennessee

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-09-01

The primary mission of the Molten Salt Reactor Experiment (MSRE) Remediation Project is to effectively implement the risk-reduction strategies and technical plans to stabilize and prevent further migration of uranium within the MSRE facility, remove the uranium and fuel salts from the system, and dispose of the fuel and flush salts by storage in appropriate depositories to bring the facility to a surveillance and maintenance condition before decontamination and decommissioning. This Project Management Plan (PMP) for the MSRE Remediation Project details project purpose; technical objectives, milestones, and cost objectives; work plan; work breakdown structure (WBS); schedule; management organization and responsibilities; project management performance measurement planning, and control; conduct of operations; configuration management; environmental, safety, and health compliance; quality assurance; operational readiness reviews; and training.

Parameterizable consensus connectomes from the Human Connectome Project: the Budapest Reference Connectome Server v3.0.

Science.gov (United States)

Szalkai, Balázs; Kerepesi, Csaba; Varga, Bálint; Grolmusz, Vince

2017-02-01

Connections of the living human brain, on a macroscopic scale, can be mapped by a diffusion MR imaging based workflow. Since the same anatomic regions can be corresponded between distinct brains, one can compare the presence or the absence of the edges, connecting the very same two anatomic regions, among multiple cortices. Previously, we have constructed the consensus braingraphs on 1015 vertices first in five, then in 96 subjects in the Budapest Reference Connectome Server v1.0 and v2.0, respectively. Here we report the construction of the version 3.0 of the server, generating the common edges of the connectomes of variously parameterizable subsets of the 1015-vertex connectomes of 477 subjects of the Human Connectome Project's 500-subject release. The consensus connectomes are downloadable in CSV and GraphML formats, and they are also visualized on the server's page. The consensus connectomes of the server can be considered as the "average, healthy" human connectome since all of their connections are present in at least k subjects, where the default value of [Formula: see text], but it can also be modified freely at the web server. The webserver is available at http://connectome.pitgroup.org.

An Early Historical Examination of the Educational Intent of Supervised Agricultural Experiences (SAEs) and Project-Based Learning in Agricultural Education

Science.gov (United States)

Smith, Kasee L.; Rayfield, John

2016-01-01

Project-based learning has been a component of agricultural education since its inception. In light of the current call for additional emphasis of the Supervised Agricultural Experience (SAE) component of agricultural education, there is a need to revisit the roots of project-based learning. This early historical research study was conducted to…

Designing Summer Research Experiences for Teachers and Students That Promote Classroom Science Inquiry Projects and Produce Research Results

Science.gov (United States)

George, L. A.; Parra, J.; Rao, M.; Offerman, L.

2007-12-01

Research experiences for science teachers are an important mechanism for increasing classroom teachers' science content knowledge and facility with "real world" research processes. We have developed and implemented a summer scientific research and education workshop model for high school teachers and students which promotes classroom science inquiry projects and produces important research results supporting our overarching scientific agenda. The summer training includes development of a scientific research framework, design and implementation of preliminary studies, extensive field research and training in and access to instruments, measurement techniques and statistical tools. The development and writing of scientific papers is used to reinforce the scientific research process. Using these skills, participants collaborate with scientists to produce research quality data and analysis. Following the summer experience, teachers report increased incorporation of research inquiry in their classrooms and student participation in science fair projects. This workshop format was developed for an NSF Biocomplexity Research program focused on the interaction of urban climates, air quality and human response and can be easily adapted for other scientific research projects.

Results of the LIRES Round Robin test on high temperature reference electrodes for LWR applications

Energy Technology Data Exchange (ETDEWEB)

Bosch, R.W. [SCK.CEN, Nuclear Research Centre Belgium, Boeretang 200, B-2400 Mol (Belgium); Nagy, G. [Magyar Tudomanyos Akademia KFKI Atomenergia Kutatointezet, AEKI, Konkoly Thege ut 29-33, 1121 Budapest (Hungary); Feron, D. [CEA Saclay, 91191 Gif-Sur-Yvette Cedex (France); Navas, M. [CIEMAT, Edificio 30, Dpto. Fision Nuclear, Avda. Complutense 22, 28040 Madrid, (Spain); Bogaerts, W. [KU Leuven, Kasteelpark Arenberg 31, B-3001 Leuven (Belgium); Karnik, D. [Nuclear Research Institute, NRI, Rez (Czech Republic); Dorsch, T. [Framatone ANP, Inc., Charlotte, North Carolina (United States); Molander, A. [Studsvik AB SE-611 82 Nykoeping (Sweden); Maekelae, K. [Materials and Structural Integrity, VTT Technical Research Centre of Finland, Kemistintie 3, P.O. Box 1704, FIN-02044 VTT (Finland)

2004-07-01

A European sponsored research project has been started on 1 October 2000 to develop high temperature reference electrodes that can be used for in-core electrochemical measurements in Light Water Reactors (LWR's). This LIRES-project (Development of Light Water Reactor Reference Electrodes) consists of 9 partners (SCK-CEN, AEKI, CEA, CIEMAT, KU Leuven, NRI Rez, Framatone ANP, Studsvik Nuclear and VTT) and will last for four years. The main objective of this LIRES project is to develop a reference electrode, which is robust enough to be used inside a LWR. Emphasize is put on the radiation hardness of both the mechanical design of the electrode as the proper functioning of the electrode. A four steps development trajectory is foreseen: (1) To set a testing standard for a Round Robin, (2) To develop different reference electrodes, (3) To perform a Round Robin test of these reference electrodes followed by selection of the best reference electrode(s), (4) To perform irradiation tests under appropriate LWR conditions in a Material Test Reactor (MTR). Four different high temperature reference electrodes have been developed and are being tested in a Round Robin test. These electrodes are: A Ceramic Membrane Electrode (CME), a Rhodium electrode, an external Ag/AgCl electrode and a Palladium electrode. The presentation will focus on the results obtained with the Round Robin test. (authors)

Study on modular technology based on the reference nuclear power plant

International Nuclear Information System (INIS)

Lu Qinwu; Zhao Shuyu; Li Yi; Han Xiaoping; Chai Weidong; Zhang Shuxia

2014-01-01

As an important technology for shortening the construction period and reducing the cost of nuclear power project, modular technology has become one of the development orientations of the third generation nuclear power plant. Taking CPR1000 nuclear power reactor as reference plant and drawing on advanced foreign technology of modularization, the overall concept design has been completed with the help of the self-developed 3D modular design system. On this basis, a typical detailed design work has been carried out so as to verify the feasibility of technology. Besides, an analysis on implementation of modular technology has been made from two aspects (procurement and construction), and the feasibility of research results in actual project has been evaluated. It provides references for the promotion of self-reliant modular technology in nuclear power project in China. (authors)

Project as a System and its Management

Directory of Open Access Journals (Sweden)

Jiří Skalický

2017-06-01

Full Text Available The contribution aims to describe project as a system, to define project control goal and strategy, control variables and their relationships. Three common control variables represented by the project triangle, are extended by two other important variables – project risk and quality. The control system consists of two components: social one – project manager and project team – and technical one – project dynamic simulation model as a decision making support of project manager in project milestones. In the project planning phase, the project baseline with planned controlled variables is created. In milestones after project launch, the actual values of these variables are measured. If the actual values deviate from planned ones, corrective actions are proposed and new baseline for the following control interval is created. Project plan takes into account the actual project progress and optimum corrective actions are determined by simulation, respecting control strategy and availability of resources. The contribution presents list of references to articles dealing with project as a system and its simulation. In most cases, they refer to the project control using the Earned Value Management method and its derivatives. Using of the dynamic simulation model for project monitoring and control, suggested in this contribution, presents a novel approach. The proposed model can serve as departure point to future research of authors and for development of appropriate and applicable tool.

Estimating reliable paediatric reference intervals in clinical chemistry and haematology.

Science.gov (United States)

Ridefelt, Peter; Hellberg, Dan; Aldrimer, Mattias; Gustafsson, Jan

2014-01-01

Very few high-quality studies on paediatric reference intervals for general clinical chemistry and haematology analytes have been performed. Three recent prospective community-based projects utilising blood samples from healthy children in Sweden, Denmark and Canada have substantially improved the situation. The present review summarises current reference interval studies for common clinical chemistry and haematology analyses. ©2013 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

Specificity, contexts, and reference groups matter when assessing autistic traits

Science.gov (United States)

Stevenson, Jennifer L.; Dern, Sebastian

2017-01-01

Many of the personality and behavioral traits (e.g., social imperviousness, directness in conversation, lack of imagination, affinity for solitude, difficulty displaying emotions) that are known to be sensitive to context (with whom?) and reference group (according to whom?) also appear in questionnaire-based assessments of autistic traits. Therefore, two experiments investigated the effects of specifying contexts and reference groups when assessing autistic traits in autistic and non-autistic participants. Experiment 1 (124 autistic and 124 non-autistic participants) demonstrated that context matters when assessing autistic traits (F(1,244) = 267.5, p autistic people” or “I like being around autistic people”), both autistic and non-autistic participants self-reported having more autistic traits; when the context was specified as the participants’ in-group, participants reported having fewer autistic traits. Experiment 2 (82 autistic and 82 non-autistic participants) demonstrated that reference group matters when assessing autistic traits (F(2,160) = 94.38, p autistic people, I have unusual eye contact”), autistic participants reported having more autistic traits; when the reference group was their in-group, autistic participants reported having fewer autistic traits. Non-autistic participants appeared insensitive to reference group on the Social Responsiveness Scale. Exploratory analyses suggested that when neither the context nor the reference group is specified (for assessing autistic traits on the Autism-Spectrum Quotient), both autistic and non-autistic participants use the majority (“non-autistic people”) as the implied context and reference group. PMID:28192464

Enhanced electricity system analysis for decision making - A reference book

International Nuclear Information System (INIS)

2000-01-01

(ESCAP), the International Atomic Energy Agency (IAEA), the International Bank for Reconstruction and Development (IBRD/World Bank), the International Institute for Applied Systems Analysis (IIASA), the Nuclear Energy Agency of the OECD (OECD/NEA), the Organization of Petroleum Exporting Countries (OPEC), the United Nations Industrial Development Organization (UNIDO) and the World Meteorological Organization (WMO). The main elements and achievements of the DECADES project are described in the different chapters of this book. Additional details are provided in the chapter references and in the bibliography. The Joint Steering Committee for the DECADES project hopes that this book will contribute to the process of strengthening and improving capabilities for the design and implementation of sustainable strategies in the power sector, in particular in developing countries and countries in transition to market economies. The reference book has been prepared with the assistance of many contributors, coming from national and international organizations active in the field of electricity system analysis. The initial drafting of the different chapters and annexes was carried out by highly qualified experts (see the list of contributors to preparation, drafting and review) who served as leading or contributing authors, drawing from their experience and know-how on the subject matter. The draft chapters prepared by the lead authors and contributors were harmonised and technically edited jointly by staff members of: the IAEA Planning and Economic Studies Section, the Nuclear Development Division of the OECD Nuclear Energy Agency, and the Industry and Energy Department of the World Bank (IBRD)

Constraints on Covariant Horava-Lifshitz Gravity from frame-dragging experiment

Energy Technology Data Exchange (ETDEWEB)

Radicella, Ninfa; Lambiase, Gaetano; Parisi, Luca; Vilasi, Gaetano, E-mail: ninfa.radicella@sa.infn.it, E-mail: lambiase@sa.infn.it, E-mail: parisi@sa.infn.it, E-mail: vilasi@sa.infn.it [Dipartimento di Fisica ' ' E.R. Caianiello" , Università di Salerno, Via Giovanni Paolo II 132, 84081 Fisciano (Italy)

2014-12-01

The effects of Horava-Lifshitz corrections to the gravito-magnetic field are analyzed. Solutions in the weak field, slow motion limit, referring to the motion of a satellite around the Earth are considered. The post-newtonian paradigm is used to evaluate constraints on the Horava-Lifshitz parameter space from current satellite and terrestrial experiments data. In particular, we focus on GRAVITY PROBE B, LAGEOS and the more recent LARES mission, as well as a forthcoming terrestrial project, GINGER.

Light-water reactors reference system classification for the European reliability data system (ERDS)

International Nuclear Information System (INIS)

Melis, M.; Mancini, G.

1982-01-01

The reference system classification represents a basic stage in the organization of the European reliability data system (ERDS) for light-water reactors, a project actually in development at the Joint Research Centre, Ispra. This project is concerned with operational reliability data collection from the various ''national'' data banks, and centralization in a European reliability data system, so improving the significance of the resulting reliability evaluations. In the framework of the ERDS project, the reference system classification provides a LWR functional break-down and represents a plant-unique identification in the process of homogenization of event-data coming from the various ''national'' organizations. The report, after a brief description of the main objectives of the ERDS project, reviews the criteria followed in the elaboration of the reference system classification; then the detailed classification is presented. The nuclear power station is subdivided in about 180 systems. To each system a sheet is associated, containing: a comprehensive description of system-functions and boundaries; a descritpion of the plant operating mode, linked to the various system functions; a list of the main interface system; and finally, a list of the main components, including type and safety classification

The Planteome database: an integrated resource for reference ontologies, plant genomics and phenomics

Science.gov (United States)

Cooper, Laurel; Meier, Austin; Laporte, Marie-Angélique; Elser, Justin L; Mungall, Chris; Sinn, Brandon T; Cavaliere, Dario; Carbon, Seth; Dunn, Nathan A; Smith, Barry; Qu, Botong; Preece, Justin; Zhang, Eugene; Todorovic, Sinisa; Gkoutos, Georgios; Doonan, John H; Stevenson, Dennis W; Arnaud, Elizabeth

2018-01-01

Abstract The Planteome project (http://www.planteome.org) provides a suite of reference and species-specific ontologies for plants and annotations to genes and phenotypes. Ontologies serve as common standards for semantic integration of a large and growing corpus of plant genomics, phenomics and genetics data. The reference ontologies include the Plant Ontology, Plant Trait Ontology and the Plant Experimental Conditions Ontology developed by the Planteome project, along with the Gene Ontology, Chemical Entities of Biological Interest, Phenotype and Attribute Ontology, and others. The project also provides access to species-specific Crop Ontologies developed by various plant breeding and research communities from around the world. We provide integrated data on plant traits, phenotypes, and gene function and expression from 95 plant taxa, annotated with reference ontology terms. The Planteome project is developing a plant gene annotation platform; Planteome Noctua, to facilitate community engagement. All the Planteome ontologies are publicly available and are maintained at the Planteome GitHub site (https://github.com/Planteome) for sharing, tracking revisions and new requests. The annotated data are freely accessible from the ontology browser (http://browser.planteome.org/amigo) and our data repository. PMID:29186578

X-ray holography with a customizable reference.

Science.gov (United States)

Martin, Andrew V; D'Alfonso, Adrian J; Wang, Fenglin; Bean, Richard; Capotondi, Flavio; Kirian, Richard A; Pedersoli, Emanuele; Pedersoli, Emmanuele; Raimondi, Lorenzo; Stellato, Francesco; Yoon, Chun Hong; Chapman, Henry N

2014-08-22

In X-ray Fourier-transform holography, images are formed by exploiting the interference pattern between the X-rays scattered from the sample and a known reference wave. To date, this technique has only been possible with a limited set of special reference waves. We demonstrate X-ray Fourier-transform holography with an almost unrestricted choice for the reference wave, permitting experimental geometries to be designed according to the needs of each experiment and opening up new avenues to optimize signal-to-noise and resolution. The optimization of holographic references can aid the development of holographic techniques to meet the demands of resolution and fidelity required for single-shot imaging applications with X-ray lasers.

Learning from project experiences using a legacy-based approach

Science.gov (United States)

Cooper, Lynne P.; Majchrzak, Ann; Faraj, Samer

2005-01-01

As project teams become used more widely, the question of how to capitalize on the knowledge learned in project teams remains an open issue. Using previous research on shared cognition in groups, an approach to promoting post-project learning was developed. This Legacy Review concept was tested on four in tact project teams. The results from those test sessions were used to develop a model of team learning via group cognitive processes. The model and supporting propositions are presented.

Future Projection with an Extreme-Learning Machine and Support Vector Regression of Reference Evapotranspiration in a Mountainous Inland Watershed in North-West China

Directory of Open Access Journals (Sweden)

Zhenliang Yin

2017-11-01

Full Text Available This study aims to project future variability of reference evapotranspiration (ET0 using artificial intelligence methods, constructed with an extreme-learning machine (ELM and support vector regression (SVR in a mountainous inland watershed in north-west China. Eight global climate model (GCM outputs retrieved from the Coupled Model Inter-comparison Project Phase 5 (CMIP5 were employed to downscale monthly ET0 for the historical period 1960–2005 as a validation approach and for the future period 2010–2099 as a projection of ET0 under the Representative Concentration Pathway (RCP 4.5 and 8.5 scenarios. The following conclusions can be drawn: the ELM and SVR methods demonstrate a very good performance in estimating Food and Agriculture Organization (FAO-56 Penman–Monteith ET0. Variation in future ET0 mainly occurs in the spring and autumn seasons, while the summer and winter ET0 changes are moderately small. Annually, the ET0 values were shown to increase at a rate of approximately 7.5 mm, 7.5 mm, 0.0 mm (8.2 mm, 15.0 mm, 15.0 mm decade−1, respectively, for the near-term projection (2010–2039, mid-term projection (2040–2069, and long-term projection (2070–2099 under the RCP4.5 (RCP8.5 scenario. Compared to the historical period, the relative changes in ET0 were found to be approximately 2%, 5% and 6% (2%, 7% and 13%, during the near, mid- and long-term periods, respectively, under the RCP4.5 (RCP8.5 warming scenarios. In accordance with the analyses, we aver that the opportunity to downscale monthly ET0 with artificial intelligence is useful in practice for water-management policies.

The Advanced Interdisciplinary Research Laboratory: A Student Team Approach to the Fourth-Year Research Thesis Project Experience

Science.gov (United States)

Piunno, Paul A. E.; Boyd, Cleo; Barzda, Virginijus; Gradinaru, Claudiu C.; Krull, Ulrich J.; Stefanovic, Sasa; Stewart, Bryan

2014-01-01

The advanced interdisciplinary research laboratory (AIRLab) represents a novel, effective, and motivational course designed from the interdisciplinary research interests of chemistry, physics, biology, and education development faculty members as an alternative to the independent thesis project experience. Student teams are assembled to work…

Project and Sports Events Management

OpenAIRE

Sebastian Madalin MUNTEANU

2011-01-01

This paper tries to capture the importance it holds the project management in socio-cultural sector which stands out when we refer to the sport. So when we talk about project management in sport, to consider a much larger vision, a new project management perspective, they involve a responsibility for the implementation of an event with global impact on very long term. Sports projects, as history shows us, played a significant role in developing societies. Also, all major sports industry proje...

The role of space communication in promoting national development with specific reference to experiments conducted in India

Science.gov (United States)

Chitnis, E. V.

The paper describes the role of space communication in promoting national development with special reference to experiments conducted in India, namely SITE (1975-1976), STEP (1977-1979) and APPLE (1981 onwards). The impact of these experiments in economic, cultural and educational terms are discussed, pointing out social implications involved in using advance space communication technology for instruction and information in the areas of education, national integration and development. The paper covers special requirements which arise when a communication system covers backward and remote rural areas in a developing country. The impact on the population measured by conducting social surveys has been discussed - especially the gains of predominently illiterate new media - participants have been highlighted. Possibilities of improving skills of teachers, the quality of the primary and higher education have been covered. The preparation required both on ground as well as space to derive benefits of space technology are considered. A profile of INSAT which marks the culmination of the experimental phase and the beginning of operational domestic satellite system is sketched.

"Applying anatomy to something I care about": Authentic inquiry learning and student experiences of an inquiry project.

Science.gov (United States)

Anstey, Lauren M

2017-11-01

Despite advances to move anatomy education away from its didactic history, there is a continued need for students to contextualize their studies to make learning more meaningful. This article investigates authentic learning in the context of an inquiry-based approach to learning human gross anatomy. Utilizing a case-study design with three groups of students (n = 18) and their facilitators (n = 3), methods of classroom observations, interviews, and artifact collection were utilized to investigate students' experiences of learning through an inquiry project. Qualitative data analysis through open and selective coding produced common meaningful themes of group and student experiences. Overall results demonstrate how the project served as a unique learning experience where learners engaged in the opportunity to make sense of anatomy in context of their interests and wider interdisciplinary considerations through collaborative, group-based investigation. Results were further considered in context of theoretical frameworks of inquiry-based and authentic learning. Results from this study demonstrate how students can engage anatomical understandings to inquire and apply disciplinary considerations to their personal lives and the world around them. Anat Sci Educ 10: 538-548. © 2017 American Association of Anatomists. © 2017 American Association of Anatomists.

The experience of Australian project leaders in encouraging practitioners to adopt research evidence in their clinical practice.

Science.gov (United States)

Henderson, Amanda J; Davies, Jan; Willet, Michaela R

2006-11-01

This paper describes a qualitative program evaluation which sought to identify factors that either assist or impede the adoption of clinical evidence in everyday practice. Thirteen Australian projects were funded in a competitive grant program to adopt innovative strategies to improve the uptake of research evidence in everyday clinical practice. Project leaders' reports were analysed to collate common themes related to 1) critical elements in successful application of research knowledge, 2) barriers to implementing evidence, and 3) lessons for other organisations that might implement a similar project. Despite the diversity of the methods used to establish projects and the range of topics and clinical settings, many similarities were identified in the perceived critical success elements, barriers, and lessons for adopting clinical evidence. Eighteen themes emerged across the data including: leadership support; key stakeholder involvement; practice changes; communication; resources; education of staff; evaluation of outcomes; consumers; knowledge gaps; adoption/implementing staff; access to knowledge; risk assessment; collaboration; effectiveness of clinical research evidence; structure/organisation; cultural barriers; previous experiences; and information technology. Leaders of projects to adopt evidence in clinical practice identified barriers, critical success elements and lessons that impacted on their projects. A range of influences on the adoption of evidence were identified, and this knowledge can be used to assist others undertaking similar projects.

2001 – 2010 Danish Design Reference Year

DEFF Research Database (Denmark)

Grunnet Wang, Peter; Scharling, Mikael; Pagh Nielsen, Kristian

This report presents the Danish Design Reference Year based on observed data from 2001 – 2010. In various sectors - i.e. building and construction, energy, etc. - the climate and weather usually plays a part in a given project. The Danish Design Reference Year dataset is a collection of data series...... for eleven specific parameters, that each represents a typical year in Denmark. The uses of the dataset may vary from simulations to statistical analysis, graphical overviews etc. The Danish land areas have been sectionalized into five to six climatological zones depending on the parameter, each...... characterized by distinct diurnal and yearly variations. The dataset consists of observed data from one station located within and representing each zone. In addition to the complete Danish Design Reference Year dataset, a subset specifically selected to be used for energy performance calculations for obtaining...

Enemona's Company experience in management of complex construction and modernization projects in sectors of industry and energetics

International Nuclear Information System (INIS)

Kalionski, V.

2005-01-01

The purpose of this paper is to present the Enemona's Company experience, gained during the management of complex projects related to Kozloduy NPP Modernization Program, enriched during the long-term collaboration with the international companies which are the executors of modernization projects. For the successful implementation of tasks on Framatom, Westinghouse, Atomenergo export projects, an exchange of process transfer, managerial practices were established between the Employers companies and Enemona Company, which along with the use of material resources, organization and personnel gave Enemona opportunity to implement and optimize goals that were set to the company. Some principles, approaches and methods of works have been established, based on strict scientific methods and practices that support Enemona to be competitive in order to assume fulfillment of similar projects not only at Kozloduy NPP site, but also at new projects and sites including the challenge for the erection of Belene NPP. In order to meet requirements of foreign companies, Enemona is able to apply new technologies and achievements in assurance of high quality of repair and installation activities on construction of new objects or their modernization

A yell of negritude: Experiences in the readers and writers formation in the More Education program

Directory of Open Access Journals (Sweden)

Agnaldo Mesquita de Lima Junior

2015-12-01

Full Text Available This study has as objective expose the report of activities developed by the program “Experiences of reading/writing: the readers/ writers formation”, focusing in the sub-project “(Di versifying: experiences at school”, specifically at the module I “A yell of negritude”. This job has been realized with the More Education program of the municipal secondary school Marechal Castelo Branco, with the objective of offering to the students a delightful relation with the reading and production of diverse texts, focusing in the formation of reading and writing of literary texts. Therefore, will be presented the theoretical and methodological references used to start the referred module, as how a brief description of the realized activities followed of reflections about the docent work.

Restucturing the Project Work Format

DEFF Research Database (Denmark)

Dupont, Søren

2015-01-01

The chapter is based on an evaluation of a pedagogical experiment at Roskilde University, the Antology Experiment. The objective of the experiment was to develop and expand the framework for project work through the production of anthologies compiled collectively by a number of project groups....... The novel aspects of the Anthology Experiment were most notably its magnitude and complexity. In this experiment the groups were totalling some 50 students who were working together. The experiment used a well-known publishing format from research, namely the anthology form, which usually focuses...... on a specific research topic and includes contributions from various researchers. In the Anthology Experiment, the project groups could be viewed as ‘research units’ that produce the contributions to the anthology. The complexity of the experiment offered challenges, both for students and supervisors...

Patient dose reference values for explorations of radiodiagnostic

International Nuclear Information System (INIS)

Vano, E.; Gonzalez, L.; Moran, P.; Calzado, A.; Delgado, V.; Ruiz, M.J.

1992-01-01

Among the results of the research programs developed in the European Community dealing with radiological protection, dose estimation and quality control in radiodiagnostics, the preparation of a document on Quality criteria for radiodiagnostic images is worthy of note. This document proposes criteria for image quality and patient dose reference values for explorations of thorax, cranium, lumbar region, pelvis, urinary tract and breast. Said reference values, while indicative, are merely an average approximation, from which the radiodiagnostic services of each area may differ significantly, as can be deduced from a EC-coordinated project. With this in mind, and following a strategy applied in the EC to establish said reference values, in this report, provisional reference values, specific for Spain, are proposed for simple examinations (those analyzed by the group of EC experts, among others) and complex probes (intravenous urography, opaque enema and esophagogastroduodenal enema). (author)

2001 - 2010 Danish design reference year. Reference climate dataset for technical dimensioning in building, construction and other sectors

Energy Technology Data Exchange (ETDEWEB)

Grunnet Wang, P.; Scharling, M.; Pagh Nielsen, K.; Kern-Hansen, C. [Danish Meteorological Institute (DMI), Copenhagen (Denmark); Wittchen, K.B. [Aalborg Univ., Danish Building Research Institute (SBi), Copenhagen (Denmark)

2013-09-15

This report presents the Danish Design Reference Year based on observed data from 2001 - 2010. In various sectors - i.e. building and construction, energy, etc. - the climate and weather usually plays a part in a given project. The Danish Design Reference Year dataset is a collection of data series for eleven specific parameters, that each represents a typical year in Denmark. The uses of the dataset may vary from simulations to statistical analysis, graphical overviews etc. The Danish land areas have been sectionalised into five to six climatological zones depending on the parameter, each characterized by distinct diurnal and yearly variations. The dataset consists of observed data from one station located within and representing each zone. In addition to the complete Danish Design Reference Year dataset, a subset specifically selected to be used for energy performance calculations for obtaining a building permit is included. (Author)

Lessons Learned from Client Projects in an Undergraduate Project Management Course

Science.gov (United States)

Pollard, Carol E.

2012-01-01

This work proposes that a subtle combination of three learning methods offering "just in time" project management knowledge, coupled with hands-on project management experience can be particularly effective in producing project management students with employable skills. Students were required to apply formal project management knowledge to gain…

Development perspectives of alternative energy projects before the new energy regulation

International Nuclear Information System (INIS)

Valencia V; Jaime A; Perez O, Jaime A; Moreno O, German

2000-01-01

Large electric energy generation systems are dominant in the energy markets. This has been like that, because the economic balances have not included yet some parameters, and specifically environmental variables, that started being considered in the international markets. Colombian generation and transmission expanding plans are commented and the possibilities for the developing of alternative energy projects are referred to those plans. Additionally, a regional experience in the definition of criteria for electric energy service coverage enlargement allowing for alternative energy inclusion is presents, remarking their successful application as a competitive alternative for rural energizing

Experiment on search for neutron-antineutron oscillations using a projected UCN source at the WWR-M reactor

Science.gov (United States)

Fomin, A. K.; Serebrov, A. P.; Zherebtsov, O. M.; Leonova, E. N.; Chaikovskii, M. E.

2017-01-01

We propose an experiment on search for neutron-antineutron oscillations based on the storage of ultracold neutrons (UCN) in a material trap. The sensitivity of the experiment mostly depends on the trap size and the amount of UCN in it. In Petersburg Nuclear Physics Institute (PNPI) a high-intensity UCN source is projected at the WWR-M reactor, which must provide UCN density 2-3 orders of magnitude higher than existing sources. The results of simulations of the designed experimental scheme show that the sensitivity can be increased by ˜ 10-40 times compared to sensitivity of previous experiment depending on the model of neutron reflection from walls.

Reference outlook for energy and emissions 2005-2020

International Nuclear Information System (INIS)

Van Dril, A.W.N.; Elzenga, H.E.

2005-05-01

The Reference Projection 2005-2020 covers the future development of Dutch energy use, greenhouse gas emissions and air pollution up to 2020. The Reference projection is based on assumptions regarding economic, structural, technological and policy developments. Two scenarios have been used. The Strong Europe (SE) scenario is characterized by moderate economic growth and strong public responsibility. The Global Economy (GE) scenario assumes high economic growth and has a strong orientation towards private responsibility. Energy consumption continues to grow in both scenarios and energy intensity is declining in the GE-scenario. Gradual rise of temperature is now included in the estimates for space heating and air conditioning. Energy prices for end users will rise, due to increased imports of natural gas and rising costs of electricity generation. The share of renewables in electricity consumption increases considerably due to subsidies for wind at sea and biomass, up to the target of 9% in 2010. Emissions of non-CO2 greenhouse gases are reduced and stabilise after 2010. The Dutch Kyoto target is probably met in both scenarios, assuming considerable emission reduction efforts abroad. Acidifying emissions of NOx and SO2 stabilise after reductions, but at levels that exceed their national emission ceiling (NEC). Emissions of volatile organic compounds are projected to fall with approximately 25% between 2002 and 2010 below their NEC. Emissions of ammonia are projected to meet their NEC. The emission of fine particles (PM10) will stabilise at present levels [nl

Athens automation and control experiment project review meeting, Dallas, Texas, December 5-6, 1984

Energy Technology Data Exchange (ETDEWEB)

Detwiler, J.S.; Hu, P.S.; Lawler, J.S.; Markel, L.C.; McIntyre, J.M.; McKinley, K.F.; Monteen, L.D.; Purucker, S.L.; Reed, J.H.; Rizy, D.T.

1985-12-01

The AACE is an electric power distribution automation project involving research and development of both hardware and software. Equipment for the project is being installed on the electric distribution system of the Athens Utilities Board (AUB), located in Athens, Tennessee. Purposes of the AACE are to develop and test load control, volt/var control, and system reconfiguration capabilities on an electric distribution system and to transfer what is learned to the electric utility industry. Expected benefits include deferral of costly power generation plants and increased electric service reliability. A project review meeting was held to review the progress of the AACE and to communicate the objectives and experimental plans to the electric utility industry. At the time of the meeting, the experimental test plans were being written; much of the AACE field equipment had been received by AUB, and installation had begun. A computer system, the AACE Test System (AACETS), was already operational at ORNL. AACETS will be used to develop and test applications software and experimental control strategies prior to their implementation on the AUB system. The AACE experiments are scheduled to begin in October 1985 and to continue through October 1987.

Experiments in the HAW project

International Nuclear Information System (INIS)

Vonka, V.; Middleton, D.W.; Ruiter, A. de.

1993-12-01

This data report is the eighth of a series intended to document the data obtained from the HAW in situ experiment (at Asse) and to make these data available to potential users. During this experiment a considerable number of thermocouples was damaged so that their signals are lost. In some cases it resulted in plots with no signal but empty frames. In the previous report we tried to change our procedure and remove these frames from the report. This action was not completely successful because, as it turned out, also some of the not empty plots were removed wrongly as well. (orig.)

International exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998. Overseas workshop; 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kaigai workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The international exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998, the 'Overseas workshop' has performed exchange in technologies with Australian coal mine engineers. The project refers to the Australian technological levels and needs in coal production, safety control and environment, as well as transfer of the Japanese coal mine technologies. This report summarizes the result of a survey on the engineer exchange project in the coal mine technology area and the possibility of joint researches. The 'overseas workshop' was held in November 1998 for two days in Brisbane City in QLD Province as the 'Japan-Australia coal technology workshop'. The 'Japan-Australia coal technology workshop' gave lectures in five sessions (the basic lecture, Japan-Australia high-speed excavation project, coal mine gas control project, exploration and resources, and development and experience of Japan). It also discussed two themes (mine safety management and rules, and greenhouse effect gases and coal mining). Two coal mines were visited thereafter to deepen the exchange with the Australian coal mine engineers. (NEDO)

Future changes in tropical cyclone activity projected by multi-physics and multi-SST ensemble experiments using the 60-km-mesh MRI-AGCM

Energy Technology Data Exchange (ETDEWEB)

Murakami, Hiroyuki [Japan Agency for Marine-Earth Science and Technology (JAMSTEC)/Meteorological Research Institute (MRI), Tsukuba, Ibaraki (Japan); University of Hawaii at Manoa, International Pacific Research Center, School of Ocean and Earth Science and Technology, Honolulu, Hawaii (United States); Mizuta, Ryo; Shindo, Eiki [Meteorological Research Institute (MRI), Climate Research Department, Tsukuba, Ibaraki (Japan)

2012-11-15

Uncertainties in projected future changes in tropical cyclone (TC) activity are investigated using future (2075-2099) ensemble projections of global warming under the Intergovernmental Panel on Climate Change (IPCC) A1B scenario. Twelve ensemble experiments are performed using three different cumulus convection schemes and four different assumptions for prescribed future sea surface temperatures (SSTs). All ensemble experiments consistently project significant reductions in global and hemispheric TC genesis numbers as well as reductions in TC frequency of occurrence (TCF) and TC genesis frequency (TGF) in the western North Pacific, South Indian Ocean, and South Pacific Ocean. TCF and TGF are projected to increase over the central Pacific which is consistent with the findings of Li et al. (2010). Inter-experimental variations of projected future changes in TGF and TC genesis number are caused mainly by differences in large-scale dynamical parameters and SST anomalies. Thermodynamic parameters are of secondary importance for variations in TGF and TC genesis number. These results imply that differences in SST spatial patterns can cause substantial variations and uncertainties in projected future changes of TGF and TC numbers at ocean-basin scales. (orig.)

Using XML Technologies to Organize Electronic Reference Resources

OpenAIRE

Huser, Vojtech; Del Fiol, Guilherme; Rocha, Roberto A.

2005-01-01

Provision of access to reference electronic resources to clinicians is becoming increasingly important. We have created a framework for librarians to manage access to these resources at an enterprise level, rather than at the individual hospital libraries. We describe initial project requirements, implementation details, and some preliminary results.

Collective Management of Reference Services.

Science.gov (United States)

Comer, Cynthia H.; And Others

1988-01-01

Describes a one-year experiment with collective management--i.e., management in which decision-making rests with the department as a whole--in the Oberlin College Library reference department. The planning process, problems, and advantages and disadvantages of this style of management are discussed. Several questions are raised about the…

Developing Spent Fuel Assembly for Advanced NDA Instrument Calibration - NGSI Spent Fuel Project

Energy Technology Data Exchange (ETDEWEB)

Hu, Jianwei [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gauld, Ian C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Banfield, James [GE Hitachi Nuclear Energy, Wilmington, NC (United States); Skutnik, Steven [Univ. of Tennessee, Knoxville, TN (United States)

2014-02-01

This report summarizes the work by Oak Ridge National Laboratory to investigate the application of modeling and simulation to support the performance assessment and calibration of the advanced nondestructive assay (NDA) instruments developed under the Next Generation Safeguards Initiative Spent Fuel (NGSI-SF) Project. Advanced NDA instrument calibration will likely require reference spent fuel assemblies with well-characterized nuclide compositions that can serve as working standards. Because no reference spent fuel standard currently exists, and the practical ability to obtain direct measurement of nuclide compositions using destructive assay (DA) measurements of an entire fuel assembly is prohibitive in the near term due to the complexity and cost of spent fuel experiments, modeling and simulation will be required to construct such reference fuel assemblies. These calculations will be used to support instrument field tests at the Swedish Interim Storage Facility (Clab) for Spent Nuclear Fuel.

Photovoltaic self-consumption: reference activity sheets

International Nuclear Information System (INIS)

2016-01-01

In order to promote the use of photovoltaic energy in self-consumption, Enerplan, the French association of solar energy professionals, has edited a set of reference sheets comprising the main technical and economic data of recent installations (cold generation facility, water treatment plant, farm, commercial and public buildings), in various French regions: description of the installation, project owner testimony, technical characteristics of the site, expected results, economic data, production/consumption results

Ecotourism: The Santa Elena Rainforest Project.

Science.gov (United States)

Wearing, Stephen

1993-01-01

Describes an ecotourism project in which the community of Santa Elena, Costa Rica, are developing a rainforest reserve on government land leased permanently to the local high school. Discusses the impact of the project on the community's economy and environment. (Contains 30 references.) (MDH)

Studies in the Philippines on ingestion and organ content of trace elements of importance to radiological protection. Reference Asian man project (phase 2)

International Nuclear Information System (INIS)

Natera, E.S.

2000-01-01

The first Coordinated Research Program (CRP) on Reference Asian Man was conducted for a period of six years. This study dealt with the collection of data in four areas namely, anthropometric measurements, organ mass measurements, nutritional and dietary intake, pulmonary and water balance studies. Results of this study participated by eight Asian member states including the Philippines are contained in the IAEA TECDOC-1005. Based on research needs with reference to radiation protection, dietary intake and tissue analysis appears to be important aspects of the RAM. Hence, the first CRM for Phase 2 held in Manila July 1-4, 1996 strengthened the need to continue the project. Protocols on its implementation were discussed during this meeting. The Philippines presented a report that described the sampling and analytical methods that will be applied. This report aim to present the initial samples collected as well as the data generated from these samples. Elements of interest to radiation protection include Sr, Th, U, 1, Cs and trace elements present in food, water and in selected tissues such as liver, lung, kidney, thyroid and bone

Experiences from Swedish demonstration projects with phosphoric acid fuel cells; Erfarenheter fraan svenska demonstrationsprojekt med fosforsyrabraensleceller

Energy Technology Data Exchange (ETDEWEB)

Carlsson, Per [Sycon Energikonsult AB, Stockholm (Sweden); Sarkoezi, Laszlo [Vattenfall Utveckling AB, Stockholm (Sweden)

1999-10-01

In Sweden, there are today two phosphoric acid fuel cells installed, one PC25A which have been in operation in more than 4 years, and one PC25C which have been in operation for two years. The aim with this project has been two compare operation characteristics, performance, and operation experiences for these two models.

Reference Device-Assisted Adaptive Location Fingerprinting

Directory of Open Access Journals (Sweden)

Dongjin Wu

2016-06-01

Full Text Available Location fingerprinting suffers in dynamic environments and needs recalibration from time to time to maintain system performance. This paper proposes an adaptive approach for location fingerprinting. Based on real-time received signal strength indicator (RSSI samples measured by a group of reference devices, the approach applies a modified Universal Kriging (UK interpolant to estimate adaptive temporal and environmental radio maps. The modified UK can take the spatial distribution characteristics of RSSI into account. In addition, the issue of device heterogeneity caused by multiple reference devices is further addressed. To compensate the measuring differences of heterogeneous reference devices, differential RSSI metric is employed. Extensive experiments were conducted in an indoor field and the results demonstrate that the proposed approach not only adapts to dynamic environments and the situation of changing APs’ positions, but it is also robust toward measuring differences of heterogeneous reference devices.

Experience Report: Introducing Kanban Into Automotive Software Project

Directory of Open Access Journals (Sweden)

Marek Majchrzak

2017-03-01

Full Text Available The boundaries between traditional and agile approach methods are disappearing. A significant number of software projects require a continuous implementation of tasks without dividing them into sprints or strict project phases. Customers expect more flexibility and responsiveness from software vendors in response to the ever-changing business environment. To achieve better results in this field, Capgemini has begun using the Lean philosophy and Kanban techniques. \\\\The following article illustrates examples of different uses of Kanban and the main stakeholder of the process. The article presents the main advantages of transparency and ways to improve the customer co-operation as well as stakeholder relationships. The Authors try to visualise all of the elements in the context of the project. \\\\There is also a discussion of different approaches in two software projects. The article fokuses on the main challenges and the evolutionary approach used. An attempt is made to answer the question how to convince both the team as well as the customer, and how to optimise ways to achieve great results.

Female Project Managers' Workplace Problems: a Survey

Science.gov (United States)

Duong, Thuong Thi; Skitmore, Martin

This article examines the extent to which challenges in the workplace may cause female project managers to be in a significantly small minority. A survey of members of the Australian Institute of Project Management in Queensland is described. This compares the experiences and observations of both men and women on various issues related to technical and gender aspects in project management workplaces. The results show that although female project managers experience many problems, male project managers also experience most of the same problems. Likewise, there are also few differences between more and less experience, the level of management, and types of industries. The differences that do occur involve discrimination against women in general, differences in project management styles, and support from other project managers.

Learning to succeed in European joint projects: the role of the modern project manager--the flow-keeper.

Science.gov (United States)

Masiello, Italo

2009-09-01

The constellation of an EU-funded project-consortium is often of very disparate culture, languages, level of knowledge and technology, social competences, experiences, ideals and ambitions that may clash with one another. Hence, coordinating and managing successful European joint projects is not an easy task. This paper addresses the learning experience of managing international research projects and, through the author's own experience and literature review, attempts to exemplify the role of the flow-keeper--a modern project manager whose particular skills are to ensure the success of EU joint projects of considerable complexity. Propositions for developing the management of international joint projects are also provided.

Reference-free ground truth metric for metal artifact evaluation in CT images

International Nuclear Information System (INIS)

Kratz, Baerbel; Ens, Svitlana; Mueller, Jan; Buzug, Thorsten M.

2011-01-01

Purpose: In computed tomography (CT), metal objects in the region of interest introduce data inconsistencies during acquisition. Reconstructing these data results in an image with star shaped artifacts induced by the metal inconsistencies. To enhance image quality, the influence of the metal objects can be reduced by different metal artifact reduction (MAR) strategies. For an adequate evaluation of new MAR approaches a ground truth reference data set is needed. In technical evaluations, where phantoms can be measured with and without metal inserts, ground truth data can easily be obtained by a second reference data acquisition. Obviously, this is not possible for clinical data. Here, an alternative evaluation method is presented without the need of an additionally acquired reference data set. Methods: The proposed metric is based on an inherent ground truth for metal artifacts as well as MAR methods comparison, where no reference information in terms of a second acquisition is needed. The method is based on the forward projection of a reconstructed image, which is compared to the actually measured projection data. Results: The new evaluation technique is performed on phantom and on clinical CT data with and without MAR. The metric results are then compared with methods using a reference data set as well as an expert-based classification. It is shown that the new approach is an adequate quantification technique for artifact strength in reconstructed metal or MAR CT images. Conclusions: The presented method works solely on the original projection data itself, which yields some advantages compared to distance measures in image domain using two data sets. Beside this, no parameters have to be manually chosen. The new metric is a useful evaluation alternative when no reference data are available.

Implementation of knowledge management approach in project oriented activities. Experience from simulator upgrade project

International Nuclear Information System (INIS)

Pironkov, L.

2010-01-01

Project specifics: Replacement of analogue process control system with Ovation®based Distributed Control System; Hybrid solution with simulated I&C logic and stimulated Human Machine Interface; Initial design ‐“turn‐key” project based on standard relationship “single customer –single contractor

The GPS Laser Retroreflector Array Project

Science.gov (United States)

Merkowitz, Stephen M.

2012-01-01

Systematic co-location in space through the precision orbit determination of GPS satellites via satellite laser ranging will contribute significantly towards improving the accuracy and stability of the international terrestrial reference frame. NASA recently formed the GPS Laser Retroreflector Array Project to develop and deliver retroreflectors for integration on the next generation of GPS satellites. These retroreflectors will be an important contributor to achieving a global accuracy of 1.0 mm and 0.1 mm/year stability in the international terrestrial reference frame. We report here the current status of the GPS Laser Retroreflector Array Project.

International exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998. Overseas workshop; 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kaigai workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The international exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998, the 'Overseas workshop' has performed exchange in technologies with Australian coal mine engineers. The project refers to the Australian technological levels and needs in coal production, safety control and environment, as well as transfer of the Japanese coal mine technologies. This report summarizes the result of a survey on the engineer exchange project in the coal mine technology area and the possibility of joint researches. The 'overseas workshop' was held in November 1998 for two days in Brisbane City in QLD Province as the 'Japan-Australia coal technology workshop'. The 'Japan-Australia coal technology workshop' gave lectures in five sessions (the basic lecture, Japan-Australia high-speed excavation project, coal mine gas control project, exploration and resources, and development and experience of Japan). It also discussed two themes (mine safety management and rules, and greenhouse effect gases and coal mining). Two coal mines were visited thereafter to deepen the exchange with the Australian coal mine engineers. (NEDO)

Patterns in professional growth of science teachers involved in a team-based PD project

DEFF Research Database (Denmark)

Nielsen, Birgitte Lund

and learning and subsequent discussion of this material. Repeated interviews were analyzed using an adapted version of the interconnected model of teachers’ professional growth. The results show various ways of experimenting with new approaches to be important for three of the teachers while a novice teacher...... the participants refer to. Conclusion is that there are professional growth patterns, especially a pattern involving experimenting, which have a forward-pointing potential to be used to inform school based PD. The results implicate that the same PD project can frame experimenting into practice in various tempi...... and with differentiated facilitation aligned to the individual teacher’s current needs and that external support of science resource teachers can be an integrated part of school based PD....

Projection of greenhouse gases 2011-2035

Energy Technology Data Exchange (ETDEWEB)

Nielsen, O -K; Plejdrup, M S; Winther, M [and others

2013-02-15

This report contains a description of models, background data and projections of CO{sub 2}, CH{sub 4}, N{sub 2}O, HFCs, PFCs and SF{sub 6} for Denmark. The emissions are projected to 2035 using a scenario combined with the expected results of a few individual policy measures. Official Danish forecasts of activity rates are used in the models for those sectors for which forecasts are available, i.e. the latest official forecast from the Danish Energy Agency. The emission factors refer to international guidelines and some are country-specific and refer to Danish legislation, Danish research reports or calculations based on emission data from a considerable number of industrial plants. The projection models are based on the same structure and method as the Danish emission inventories in order to ensure consistency. (Author)

Experiences of success in industrial plants projects Experiencias exitosas en proyectos de plantas industriales

Directory of Open Access Journals (Sweden)

Nuria Forcada

2008-08-01

Full Text Available Success has always been the ultimate goal of construction projects, and different researchers have tried to evaluate it using different factors. Although specialized industrial construction usually involves very large scale projects with a high degree of technological complexity, research has mostly focused on civil and residential success factors. Experiences in Industrial Plants projects can help to improve project management and productivity in such a specialized sector. In this kind of projects, the contractual arrangement is one of the core differences on Project management and thus project success. This research seeks to develop a schema for classifying critical success factors as well as a methodology for evaluating projects. This methodology was adopted to evaluate critical success factors in Industrial Plants projects with different contractual arrangements. Findings suggest that although the construction stage has been the focus of many studies, the first stages are decisive for the success of projects; contract construction projects consider project planning to be more important; lump sum contract construction projects give greater importance to monitoring the benefits; bidding competition projects consider the available technology with greater rigor, etc. The results indicate that different Industrial Plants projects involve different success factors and management characteristics to achieve project objectives.En cualquier proyecto de construcción el principal objetivo es que sea exitoso y por lo tanto a lo largo del tiempo diferentes investigadores han tratado de evaluar los factores que influyen en el éxito de proyectos. En el ámbito de la construcción estas investigaciones se han enfocado principalmente a obras civiles y residenciales. Este artículo muestra resultados que provienen de proyectos de construcción industrial especializada que incluyen proyectos de gran escala con un alto grado de complejidad tecnol

Aerosol retrieval experiments in the ESA Aerosol_cci project

Directory of Open Access Journals (Sweden)

T. Holzer-Popp

2013-08-01

Full Text Available Within the ESA Climate Change Initiative (CCI project Aerosol_cci (2010–2013, algorithms for the production of long-term total column aerosol optical depth (AOD datasets from European Earth Observation sensors are developed. Starting with eight existing pre-cursor algorithms three analysis steps are conducted to improve and qualify the algorithms: (1 a series of experiments applied to one month of global data to understand several major sensitivities to assumptions needed due to the ill-posed nature of the underlying inversion problem, (2 a round robin exercise of "best" versions of each of these algorithms (defined using the step 1 outcome applied to four months of global data to identify mature algorithms, and (3 a comprehensive validation exercise applied to one complete year of global data produced by the algorithms selected as mature based on the round robin exercise. The algorithms tested included four using AATSR, three using MERIS and one using PARASOL. This paper summarizes the first step. Three experiments were conducted to assess the potential impact of major assumptions in the various aerosol retrieval algorithms. In the first experiment a common set of four aerosol components was used to provide all algorithms with the same assumptions. The second experiment introduced an aerosol property climatology, derived from a combination of model and sun photometer observations, as a priori information in the retrievals on the occurrence of the common aerosol components. The third experiment assessed the impact of using a common nadir cloud mask for AATSR and MERIS algorithms in order to characterize the sensitivity to remaining cloud contamination in the retrievals against the baseline dataset versions. The impact of the algorithm changes was assessed for one month (September 2008 of data: qualitatively by inspection of monthly mean AOD maps and quantitatively by comparing daily gridded satellite data against daily averaged AERONET sun

Population-Based Pediatric Reference Intervals in General Clinical Chemistry: A Swedish Survey.

Science.gov (United States)

Ridefelt, Peter

2015-01-01

Very few high quality studies on pediatric reference intervals for general clinical chemistry and hematology analytes have been performed. Three recent prospective community-based projects utilising blood samples from healthy children in Sweden, Denmark and Canada have substantially improved the situation. The Swedish survey included 701 healthy children. Reference intervals for general clinical chemistry and hematology were defined.

Supporting workers with mental health problems to retain employment: users' experiences of a UK job retention project.

Science.gov (United States)

Cameron, Josh; Walker, Carl; Hart, Angie; Sadlo, Gaynor; Haslam, Imogen; Retain Support Group

2012-01-01

To understand experiences and perspectives of job retention project users in relation to challenges faced and support received; to develop explanatory insight into effective interventions. 14 employed users of a United Kingdom job retention project, with a range of mental health problems. Semi-structured individual interviews which were collaboratively designed with service users. Data analysis involved deductive & inductive thematic analysis, constant comparative analysis, and service user collaboration. Participants' feelings of guilt and self blame were a major obstacle to job retention. The project helped them address these by supporting a reappraisal of their situation. This assisted identification of job accommodations and adjustments and confidence in self advocacy. Thus an important basis for improved dialogue with their employer was established. A peer support group provided an important adjunct to individual project worker interventions. 10 participants retained employment; three of those who did not were helped to retain work aspirations. The project effectively used a multi-faceted approach involving a person - environment-occupation focus on the worker, their work, and workplace. Such complex interventions may offer more promise than those interventions (such as cognitive behavioural therapy) which have a primary focus on the individual worker.

Enhancing Scientific Inquiry Literacy of Prospective Biology Teachers through Inquiry Lab Project in Microbiology

Science.gov (United States)

Kusnadi, K.; Rustaman, N. Y.; Redjeki, S.; Aryantha, I. N. P.

2017-09-01

The implementation of the inquiry laboratory based project to enhance scientific inquiry literacy of prospective biology teachers in Microbiology course has been done. The inquiry lab based project was designed by three stages were debriefing of basic microbiology lab skills, guided inquiry and free inquiry respectively. The Study was quasi experimental with control group pretest-posttest design. The subjects were prospective biology teachers consists of 80 students. The scientific inquiry literacy instrument refers to ScInqLiT by Wenning. The results showed that there was significant difference of scientific inquiry literacy posttest scores between experiment and control (α 0,05) and was obtained N-gain score was 0.49 (medium) to experiment and 0.24 (low) to control. Based on formative assessment showed that development of student’s scientific attitude, research and microbiology lab skills during conducting project were increased. Student’s research skills especially in identification of variables, constructing a hypothesis, communicating and concluding were increased. During implementation of inquiry project also showed that they carried out mind and hands-on and so collaborative group investigation lab activities. Our findings may aid in reforming higher-education, particularly in microbiology laboratory activities to better promote scientific inquiry literacy, scientific attitude, research and laboratory skills.