Measurement of local critical currents in TFA-MOD processed coated conductors by use of scanning Hall-probe microscopy

International Nuclear Information System (INIS)

Shiohara, K.; Higashikawa, K.; Kawaguchi, T.; Inoue, M.; Kiss, T.; Yoshizumi, M.; Izumi, T.

2011-01-01

We have investigated 2-dimensional distribution of critical current density. We have measured TFA-MOD processed YBCO coated conductor. We used scanning Hall-probe microscopy. These provided information is useful for fabrication process of coated conductor. We have carried out 2-dimensional (2D) measurement of local critical current in a Trifluoroacetates-Metal Organic Deposition (TFA-MOD) processed YBCO coated conductor using scanning Hall-probe microscopy. Recently, remarkable R and D accomplishments on the fabrication processes of coated conductors have been conducted extensively and reported. The TFA-MOD process has been expected as an attractive process to produce coated conductors with high performance at a low production cost due to a simple process using non-vacuum equipments. On the other hand, enhancement of critical currents and homogenization of the critical current distribution in the coated conductors are definitely very important for practical applications. According to our measurements, we can detect positions and spatial distribution of defects in the conductor. This kind of information will be very helpful for the improvement of the TFA-MOD process and for the design of the conductor intended for practical electric power device applications.

Force and Strength Analysis of the Reel with Jaw of Torsion-bar Spring

Science.gov (United States)

Ma, Ke; Liu, Weiqi; Wang, Jiawei; Gu, Le

2017-06-01

Structure characteristics and working principle of the reel with jaw of torsion-bar spring are introduced. The reel can not only eliminate the leakage risks of hydraulic jaw, but also reduce the investment cost of enterprises and improve the surface quality of the products. The static analysis of mandrel, sector plate and oblique wedge were conducted, and the main data of stress distribution and deformation were obtained, which provide a reliable theoretical basis for the design and optimization of the reel. The research results show that the external support has a great effect on the stress and deformation of the mandrel. With the increase of the weight of steel stress increases, the drum deformation increases, but the analysis of the position of maximum stress, can be obtained to drum stress and deformation is the main reason of excessive bending moment caused by heavy steel rolls. The bending moment and deformation can be reduced significantly at the end of the steel coil, which can effectively improve the service life of the drum.

Siim Nestor soovitab : Reel People. Selffish. Xploding Plastix / Siim Nestor

Index Scriptorium Estoniae

Nestor, Siim, 1974-

2005-01-01

Popmuusika üritustest: briti ansambel Reel People ja ansambel Hinkus 28. apr. Rock Café's Tallinnas Jazzkaare raames, läti diskor ja produtsent Andrew Eigus (Selffish) koos eesti diskoritega 29. apr. peol Pirita jõe suudmes laeval Monica, norra duo Xpoding Plastix ja ansambel Kismabande 29. apr. Sakala keskuse suures saalis Jazzkaare raames

NGOs and gender policy: some issues from the south Indian silk-reeling industry.

Science.gov (United States)

Mayoux, L

1993-10-01

In India, silk reeling, the middle stage in silk production, is potentially very profitable, and the silk industry has been required to adopt gender-aware policies such as appointing female staff and introducing gender sensitization training. To date, policies designed to encourage women's entrepreneurship in the reeling industry have been unsuccessful. Men have appropriated credit issued in women's names, and no women's cooperatives are currently in operation. The policies designed to encourage female entrepreneurship in reeling woefully overlooked the complexity of this work which involves a substantial investment of capital and significant risk. Women and girls continue to work as unpaid family workers and wage laborers without the benefits of governmental policies to protect their interests. In fact, attempts to introduce labor legislation to protect women have been blocked on the national level by the powerful Reelers' Association. Policies which address gender issues in the family and in the wider context of the silk industry are also lacking, and there is a wide variation in how women are able or unable to manipulate their positions to their advantage. Women's inabilities are the root cause of their inability to become entrepreneurs and improve their labor status. Nongovernmental organizations can enhance entrepreneurship and cooperative development by improving training in all aspects of running a business and in group formation. Women laborers must organize to improve wages and working conditions, and women must be able to increase their control over income and resources and their access to the outside world even as they decrease the time spent on unpaid reproductive labor.

Development of a coupled tendon-driven 3D multi-joint manipulator. Investigation of tension transfer efficiency, optimal reel arrangement and tip positioning accuracy

International Nuclear Information System (INIS)

Horigome, Atsushi; Yamada, Hiroya; Hirose, Shigeo; Sen, Shin; Endo, Gen

2017-01-01

Long-reach robotic manipulators are expected to be used in the space where humans cannot work such as nuclear power plant disaster areas. We suggested a coupled tendon-driven articulated manipulator '3D CT-Arm' and developed a preliminary prototype 'Mini 3D CT-Arm' whose arm had 2.4 m length and 0.3 m width. In order to consider developing '3D CT-Arm' deeply, we discussed tension transfer efficiency of a tendon through pulleys, the arrangement of the maximum number of reels in a limited space and the tip positioning accuracy. Through many transfer efficiency experiments, we conclude that tension transfer efficiency of '3D CT-Arm' can reach over 88% in the worst case. We investigated non-interfering reels' arrangement in the base by full search in cases of up to 10 reels. In all simulations, V-shaped or W-shaped arrangement can support the most reels in a limited space. Therefore, we conclude this is the most optimal reels' arrangement. Finally, we carried out the positioning accuracy experiment with 'Mini 3D CT-Arm' via motion capture system. Although the tip position had a 2 to 41 mm error between the desired value and the measured value by potentiometer, a 29 to 95 mm error between the desired value and the measured value was measured by motion capture system. (author)

Slot Machines: Pursuing Responsible Gaming Practices for Virtual Reels and Near Misses

Science.gov (United States)

Harrigan, Kevin A.

2009-01-01

Since 1983, slot machines in North America have used a computer and virtual reels to determine the odds. Since at least 1988, a technique called clustering has been used to create a high number of near misses, failures that are close to wins. The result is that what the player sees does not represent the underlying probabilities and randomness,…

Second Generation HTs Wire Based on RABiTS Substrates and MOD YBCO

Energy Technology Data Exchange (ETDEWEB)

Schoop, U. [American Superconductor Corporation, Westborough, MA; Rupich, Marty [American Superconductor Corporation, Westborough, MA; Thieme, C. L. H. [American Superconductor Corporation, Westborough, MA; Verebelyi, D. T. [American Superconductor Corporation, Westborough, MA; Zhang, W. [American Superconductor Corporation, Westborough, MA; Li, Xiaoping [American Superconductor Corporation, Westborough, MA; Kodenkandath, Thomas [American Superconductor Corporation, Westborough, MA; Nguyen, N. [American Superconductor Corporation, Westborough, MA; Siegal, E. E. [American Superconductor Corporation, Westborough, MA; Civale, L. [Los Alamos National Laboratory (LANL); Holesinger, T. G. [Los Alamos National Laboratory (LANL); Maiorov, B. [Los Alamos National Laboratory (LANL); Goyal, Amit [ORNL; Paranthaman, Mariappan Parans [ORNL

2005-01-01

The performance of Second Generation (2G) high temperature superconducting wire manufactured by continuous reel-to-reel processes is nearing the 300 A/cm-width (77 K, self field) performance threshold for commercial power cable applications. The 2G manufacturing approach under development at American Superconductor is based on the combination of the RABiTS substrate-buffer technology with metal organic deposition (MOD) of the YBCO layer. The capability of this process has been demonstrated in multiple 10 meter lengths with critical currents exceeding 250 A/cm-width with high uniformity and reproducibility. Critical currents of 380 A/cm-width have been achieved in short length samples prepared by the same basic process. The incorporation of nanoparticles ('nanodots') into the YBCO layer using the MOD process has resulted in a 2-fold improvement in the critical current at 65 K in a 3 T field. The research and development focus at ASMC is now directed toward the economical scale-up of the RABiTS/MOD process, optimization of the conductor properties for targeted applications and the use of 2G wire in initial demonstration applications.

78 FR 60018 - Requested Administrative Waiver of the Coastwise Trade Laws: Vessel HOOKED FOR REEL; Invitation...

Science.gov (United States)

2013-09-30

... entered into this docket is available on the World Wide Web at http://www.regulations.gov . FOR FURTHER... HOOKED FOR REEL is: INTENDED COMMERCIAL USE OF VESSEL: Sport fishing charters GEOGRAPHIC REGION: Michigan...

Automated installations for reeling up of superconducting magnet windings of the accelerating-storage complex

International Nuclear Information System (INIS)

Dolzhenkov, V.I.; Elistratov, V.V.; Kuznetsov, Yu.V.; Petrov, V.B.; Popov, V.V.; Savel'ev, A.V.; Sokolov, B.V.; Sytnik, V.V.; Tarakanov, N.M.; Ustinov, E.A.

1992-01-01

An automated facility for reeling up the windings of model and full-scale superconducting magnets of the accelerating-storage complex is described. The control system monitors superconducting cable tension, transport carriage linear velocity and some other parameters. Maximum length of the winded coils is 6 m. Cable tension stability - 5%

Reproduction of European Eel in Aquaculture (REEL)

DEFF Research Database (Denmark)

Tomkiewicz, Jonna; Tybjerg, Lars; Støttrup, Josianne

for the development of methods to reproduce European eel in aquaculture. Two major projects: Artificial Reproduction of Eels II and III (ROE II and III) succeeded during 2005-2008 to produce viable eggs and larvae that lived up to 12 days. The larvae thereby accomplished the yolk-sac stage and became ready to start...... feeding. The results were in particular promising because they evidenced that methods successfully applied to Japanese eel has a potential for application also to the European eel. ROE II and III were supported by the Ministry of Food, Agriculture and Fisheries and the European Commission through...... the Financial Instrument for Fisheries Guidance (FIFG) and the Danish Food Research Program 2006, respectively. Results: The REEL project accomplished through three series of experiments to consolidate previous results. The longevity of larvae was extended from 12 to 20 days after hatch in first feeding...

76 FR 70216 - Requested Administrative Waiver of the Coastwise Trade Laws; Vessel REEL ATTITUDE; Invitation for...

Science.gov (United States)

2011-11-10

... DEPARTMENT OF TRANSPORTATION Maritime Administration [Docket No. MARAD-2011 0146] Requested Administrative Waiver of the Coastwise Trade Laws; Vessel REEL ATTITUDE; Invitation for Public Comments AGENCY... ATTITUDE is: Intended Commercial Use of Vessel: ``Fishing Charter passenger less than 6.'' Geographic...

Reel news in the digital age: Framing Britain’s radical video-activists

OpenAIRE

Presence, S.

2016-01-01

The most recent book-length study of radical British filmmaking, Margaret Dickinson’s Rogue Reels: Oppositional Film in Britain, 1945-90 (1999), ends by noting the emergence Undercurrents in 1994 as an example of the burgeoning use of video as a propaganda tool. Indeed, Undercurrents went on to become one of the most established British video-activist groups in the 1990s, among others such as Despite TV and Conscious Cinema. \\ud \\ud However, while Undercurrents remain a key part of contempora...

Fabrication of High-Quality SmBa2Cu3O7-δ Thin Films by a Modified TFA-MOD Process

International Nuclear Information System (INIS)

Kim, Duck Jin; Moon, Seung Hyun; Park, Chan; Yoo, Sang Im; Song, Kyu Jeong

2005-01-01

We report a successful fabrication of high-quality SmBa 2 Cu 3 O 7-δ (SmBCO) thin films on LaAlO 3 (LAO)(100) single crystalline substrates by a modified TFA-MOD method. After the pyrolysis heat treatment of spin-coated films up to 400 degree C, SmBCO films were fired at various temperatures ranging from 810 to 850 degree C in a reduced oxygen atmosphere (10 ppm O 2 in Ar). Optimally processed SmBCO films exhibited the zero-resistance temperature (T c ,zero) of 90.2 K and the critical current density (J c ) of 0.8 MA/cm 2 at 77K in self-field. Compared with the J c values (normally, > 2 MA/cm 2 at 77 K) of MOD-TFA processed YBCO films, rather depressed J c values in SmBCO films are most probably attributed to the existence of alpha-axis oriented grains.

Deployable structures using bistable reeled composites

Science.gov (United States)

Daton-Lovett, Andrew J.; Compton-Bishop, Quentin M.; Curry, Richard G.

2000-06-01

This paper describes an innovative, patented use of composite materials developed by RolaTube Technology Ltd. to make smart deployable structures. Bi-stable reeled composites (BRCs) can alternate between two stable forms; that of a strong, rigid structure and that of a compact coil of flat-wound material. Bi-stability arises as a result of the manipulation of Poisson's ratio and isotropy in the various layers of the material. BRCs are made of fiber- reinforced composite materials, most often with a thermoplastic matrix. A range of fibers and polymer matrices can be used according to the requirements of the operating environment. Samples of a BRC structure were constructed using layers of unidirectional, fiber-reinforced thermoplastic sheet with the layers at different angles. The whole assembly was then consolidated under conditions of elevated temperature and pressure. The properties of the BRC are described and the result of a series of experiments performed on the sample to determine the tensile strength of the BRC structure are reported. A full analysis using finite element methods is being undertaken in collaboration with the University of Cambridge, England. The first commercial use has been to fabricate boom and drive mechanisms for the remote inspection of industrial plant.

HTS current lead units prepared by the TFA-MOD processed YBCO coated conductors

International Nuclear Information System (INIS)

Shiohara, K.; Sakai, S.; Ishii, Y.; Yamada, Y.; Tachikawa, K.; Koizumi, T.; Aoki, Y.; Hasegawa, T.; Tamura, H.; Mito, T.

2010-01-01

Two superconducting current lead units have been prepared using ten coated conductors of the Tri-Fluoro-Acetate - Metal Organic Deposition (TFA-MOD) processed Y 1 Ba 2 Cu 3 O 7-δ (YBCO) coated conductors with critical current (I c ) of about 170 A at 77 K in self-field. The coated conductors are 5 mm in width, 190 mm in length and about 120 μm in overall thickness. The 1.5 μm thick superconducting YBCO layer was synthesized through the TFA-MOD process on Hastelloy TM C-276 substrate tape with two buffer oxide layers of Gd 2 Zr 2 O 7 and CeO 2 . The five YBCO coated conductors are attached on a 1 mm thick Glass Fiber Reinforced Plastics (GFRP) board and soldered to Cu caps at the both ends. We prepared two 500 A-class current lead units. The DC transport current of 800 A was stably applied at 77 K without any voltage generation in all coated conductors. The voltage between both Cu caps linearly increased with increasing the applied current, and was about 350 μV at 500 A in both current lead units. According to the estimated values of the heat leakage from 77 K to 4.2 K, the heat leakage for the current lead unit was 46.5 mW. We successfully attained reduction of the heat leakage because of improvement of the transport current performance (I c ), a thinner Ag layer of YBCO coated conductor and usage of the GFRP board for reinforcement instead of a stainless steel board used in the previous study. The DC transport current of 1400 A was stably applied when the two current lead units were joined in parallel. The sum of the heat leakages from 77 K to 4.2 K for the combined the current lead units was 93 mW. In comparison with the conventional Cu current leads by gas-cooling, it could be noted that the heat leakage of the current lead is about one order of magnitude smaller than that of the Cu current lead.

Design of small diameter HT/HP sour service reeled rigid pipelines

Energy Technology Data Exchange (ETDEWEB)

Carneiro, Daniel; Gouveia, Joao; Tardelli, Luciano [Tecnitas, Rio de Janeiro, RJ (Brazil)], e-mail: daniel.carneiro@br.bureauveritas.com; Parrilha, Rafael [Bureau Veritas Group, London (United Kingdom); Oazen, Eduardo; Cardoso, Carlos [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

2009-12-19

The paper presents an overview of the challenges overcome in the engineering design of two 219 mm diameter, 6 km length oil production pipelines, to be installed by reeling at Espirito Santo Basin, offshore Brazilian coast in 1500 m water depth. The high temperature and high pressure (HT/HP) operating conditions and sour content associated with the small diameter required to single well oil production would usually lead to flexible flow line solution in Brazilian fields. The decision of employing small diameter thick-walled rigid C-Mn steel pipelines with thick thermal insulation made necessary extensive engineering work to achieve a safe and robust thermal expansion control arrangement, including the design of walking mitigation and buckle initiation apparatus; a feasible weld acceptance criterion covering both high cycle fatigue due to pipe lay and vortex induced vibration (VIV) at free spans, and high strain low cycle fatigue and fracture growth induced by reeling installation and in-service lateral buckling. Several studies were performed using highly non-linear three-dimensional finite element models considering: pipe-soil interaction with full 3D seabed bathymetry; load history maintained from pipe lay to operational cycles, including temperature transient effects; high plastic strains (including steel properties de-rating due to high temperature) and section ovalization; mechanical contact between pipe and appurtenances during both installation and operational phases. Pipe-soil interaction comprised embedment considering dynamic effects of pipe lay and full non-linear lateral and axial response curves including break-out and residual resistance. Strain concentration factors due to field joints were evaluated using detailed solid models considering non-linear response of both steel and insulation materials. Susceptibility to VIV at free spans was assessed considering post loaded deformed span natural frequencies, including multi-span interaction effects and

Uniform performance of continuously processed MOD-YBCO-coated conductors using a textured Ni-W substrate

International Nuclear Information System (INIS)

Verebelyi, D T; Schoop, U; Thieme, C; Li, X; Zhang, W; Kodenkandath, T; Malozemoff, A P; Nguyen, N; Siegal, E; Buczek, D; Lynch, J; Scudiere, J; Rupich, M; Goyal, A; Specht, E D; Martin, P; Paranthaman, M

2003-01-01

Second-generation coated conductor composite HTS wires have been fabricated using a continuous reel-to-reel process with deformation-textured Ni-W substrates and a metal-organic deposition process for YBa 2 Cu 3 O 7-x . Earlier results on 1 m long and 1 cm wide wires with 77 K critical current performance greater than 100 A cm -1 width have now been extended to 7.5 m in length and even higher performance, with one wire at 132 and another at 127 A cm -1 width. Performance as a function of wire length is remarkably uniform, with only 2-4% standard deviation when measured on a 50 cm length scale. The length-scale dependence of the deviation is compared with a statistical calculation. (rapid communication)

Uniform performance of continuously processed MOD-YBCO-coated conductors using a textured Ni-W substrate

Energy Technology Data Exchange (ETDEWEB)

Verebelyi, D T [American Superconductor Corporation, Westborough, MA 01581 (United States); Schoop, U [American Superconductor Corporation, Westborough, MA 01581 (United States); Thieme, C [American Superconductor Corporation, Westborough, MA 01581 (United States); Li, X [American Superconductor Corporation, Westborough, MA 01581 (United States); Zhang, W [American Superconductor Corporation, Westborough, MA 01581 (United States); Kodenkandath, T [American Superconductor Corporation, Westborough, MA 01581 (United States); Malozemoff, A P [American Superconductor Corporation, Westborough, MA 01581 (United States); Nguyen, N [American Superconductor Corporation, Westborough, MA 01581 (United States); Siegal, E [American Superconductor Corporation, Westborough, MA 01581 (United States); Buczek, D [American Superconductor Corporation, Westborough, MA 01581 (United States); Lynch, J [American Superconductor Corporation, Westborough, MA 01581 (United States); Scudiere, J [American Superconductor Corporation, Westborough, MA 01581 (United States); Rupich, M [American Superconductor Corporation, Westborough, MA 01581 (United States); Goyal, A [Oak Ridge National Laboratory, Oak Ridge, TN 37831-6100 (United States); Specht, E D [Oak Ridge National Laboratory, Oak Ridge, TN 37831-6100 (United States); Martin, P [Oak Ridge National Laboratory, Oak Ridge, TN 37831-6100 (United States); Paranthaman, M [Oak Ridge National Laboratory, Oak Ridge, TN 37831-6100 (United States)

2003-05-01

Second-generation coated conductor composite HTS wires have been fabricated using a continuous reel-to-reel process with deformation-textured Ni-W substrates and a metal-organic deposition process for YBa{sub 2}Cu{sub 3}O{sub 7-x}. Earlier results on 1 m long and 1 cm wide wires with 77 K critical current performance greater than 100 A cm{sup -1} width have now been extended to 7.5 m in length and even higher performance, with one wire at 132 and another at 127 A cm{sup -1} width. Performance as a function of wire length is remarkably uniform, with only 2-4% standard deviation when measured on a 50 cm length scale. The length-scale dependence of the deviation is compared with a statistical calculation. (rapid communication)

Round table on the Supply Chain for NPPs construction: Localization - Daya Bay Experience; REEL Handling and Lifting Systems, More than 60 years expertise in lifting and handling equipment in production process

International Nuclear Information System (INIS)

Frantz, Philippe; Lachaise, Marc; Lau, Steven

2014-01-01

The second day afternoon began with the round table on the Supply Chain for NPPs construction with Philippe Frantz, President of REEL, Marc Lachaise, Head of procurement of NNB at EDF Energy, and Steven Lau, First Deputy General Manager of DNMC. Philippe Frantz started to present the activities and the contribution of REEL in the construction of NPPs as a main supplier of handling system. Then, Marc Lachaise took the lead to present Hinkley Point C Project, the Values of NNB and the key role of the supply chain in this Project. Steven Lau went on to describe the link of the supply chain with the operating of NPPs and explained the cooperation between EDF and CGNPC in order to secure the supply of equipment. Following their presentation, they started the open discussion with the audience by explaining their strategy to make or to buy and the link of this strategy to their core business. They also highlighted the new relations and the new partnership between supplier and customer. They insisted on the necessity to invest on supply chain and to have a strong Nuclear Safety Culture in the supply chain

Preparation and properties of Y{sub 1-x}Ho{sub x}Ba{sub 2}Cu{sub 3}O{sub 7-{delta}} thin films by TFA-MOD method

Energy Technology Data Exchange (ETDEWEB)

Jian Hongbin [Key Laboratory of Materials Physics, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031 (China); Li Qi; Shi Dongqi [Institute for Superconducting and Electronic Materials, University of Wollongong, Wollongong 2522 (Australia); Zhang Li [Department of Mathematic and Physics, Anhui University of Architecture, Hefei 230022 (China); Yang Zhaorong [Key Laboratory of Materials Physics, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031 (China); Dou Shixue [Institute for Superconducting and Electronic Materials, University of Wollongong, Wollongong 2522 (Australia); Zhu Xuebin, E-mail: xbzhu@issp.ac.cn [Key Laboratory of Materials Physics, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031 (China); Sun Yuping [Key Laboratory of Materials Physics, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031 (China)

2011-12-15

Y{sub 1-x}Ho{sub x}BCO thin films were prepared by TFA-MOD. The best performances were obtained for the Y{sub 0.6}Ho{sub 0.4}BCO thin film. The pinning mechanism was {delta}l-type for all derived thin films. Y{sub 1-x}Ho{sub x}Ba{sub 2}Cu{sub 3}O{sub 7-{delta}} (x = 0, 0.1, 0.2, 0.3, 0.4, 0.5) thin films were prepared on LaAlO{sub 3} (0 0 1) substrates by trifluoroacetate metal organic deposition (TFA-MOD) without change of the processing parameters. The highest J{sub c} was attributed to the sample of Y{sub 0.6}Ho{sub 0.4}Ba{sub 2}Cu{sub 3}O{sub 7-{delta}} thin film, whose critical current density is about 1.6 times as compared to that of YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} thin film at 77 K and self field. The flux pinning type was not varied with Ho substitution and can be attributed to {delta}l pinning model, which is attributed to the close ionic radius between the Y{sup 3+} and Ho{sup 3+} ions. The improvement of J{sub c} by Ho substitution without change of the processing parameters will provide an effective route to enhance the J{sub c} of YBCO-based thin films using TFA-MOD method.

The effects of the firing temperature of YBCO coated conductors fabricated by TFA-MOD process

International Nuclear Information System (INIS)

Jang, Seok Hern; Lim, Jun Hyung; Kim, Kyu Tae; Lee, Jin Sung; Yoon, Kyung Min; Kim, Ho-Jin; Joo, Jinho; Kim, Hyoungsub; Lee, Hee-Gyoun; Hong, Gye-Won

2006-01-01

We fabricated YBCO films on LAO substrates using the TFA-MOD method and evaluated the effects of the heat treatment temperature on the microstructure, degree of texture, and critical properties. The phase formation and microstructure were characterized by X-ray diffraction, Raman spectroscopy and scanning electron microscopy (SEM) and the degree of texture was evaluated by pole-figure analysis. The firing was performed in the temperature range of 750-800 deg. C and we found that the phase purity, grain size and orientation, degree of texture, and oxygen content varied with the firing temperature. The films fired at 775 deg. C showed the highest critical temperature (T C -onset) of 89.5 K and critical current (I C ) of 40 A/cm-width, which corresponds to a critical current density (J C ) of 1.8 MA/cm 2 . According to the results of the XRD, pole-figure, SEM and Raman analyses, these optimum critical properties can probably be attributed to the formation of a pure YBCO phase, stronger c-axis orientation and higher oxygen content

Surface energy loss processes in XPS studied by absolute reflection electron energy loss spectroscopy

International Nuclear Information System (INIS)

Nagatomi, T.; Goto, K.

2010-01-01

The results of the investigation of the inelastic interaction of 300-3000 eV electrons with the Ni and Au surfaces by the analysis of absolute reflection electron energy loss spectroscopy (REELS) spectra were described. The present analysis enables the inelastic mean free path (IMFP), surface excitation parameter (SEP) and differential SEP (DSEP) to be obtained simultaneously from an absolute REELS spectrum. The obtained IMFPs for Ni and Au showed a good agreement with those calculated using the TPP-2M predictive equation. The present SEPs determined for Ni and Au were fitted to the Chen's formula describing the dependence of the SEP on the electron energy, and material parameters for Ni and Au in Chen's formula were proposed. The present DESPs were compared with the theoretical results, and a reasonable agreement between the experimentally determined DSEPs and theoretical results was confirmed. The MC modeling of calculating the REELS spectrum, in which energy loss processes due to surface excitations are taken into account, was also described. The IMFP, SEP and DSEP determined by the present absolute REELS analysis were employed to describe energy loss processes by inelastic scattering in the proposed MC simulation. The simulated REELS spectra were found to be in a good agreement with the experimental spectra for both Ni and Au.

Reel Efektif Döviz Kurunun Durağanlığının Yapısal Kırılmalı Panel Birim Kök Testleri Kullanılarak Sınanması = Analyzing the Stationarity of Reel Effective Exchange Rates Using Panel Unit Root Tests with Structural Breaks

Directory of Open Access Journals (Sweden)

Ferda YERDELEN TATOĞLU

2009-06-01

Full Text Available In the last years, many studies have analyzed the stationarity of reel exchange rates which gives important knowledge about economic stability of countries. The panel unit root tests which include both pooled and individual unit root tests are used frequently to analyze the stationarity of real exchange rates. Generally, structural breaks issue have taken place in macroeconomic time series for some years. If unit root tests are used without taking account these structural breaks, stationarity hypothesis can be rejected mistakenly. In this study, panel unit root tests with and without structural breaks were used to analyze the validity of Purchasing Power Parity hypothesis in 25 OECD countries. According to the results, while in panel unit root tests with no break, PPP theory is valid for only 10 countries; it is valid for all countries in panel unit root tests with structural breaks.

Device for selectively securing an object to a shaft

International Nuclear Information System (INIS)

Calizano, F.; Chauvel, M.

1984-01-01

A magnetic tape reel is secured to a reel drive motor shaft by a device including a hub secured to the shaft, a plurality of shoes, and actuating means for thrusting the shoes against the reel and for releasing them from contact with the reel. The securing device includes a cam mounted on the shaft in combination with a locking device including the cam periphery. The locking device thrusts the shoes against the object and is operated by rotation of the motor. The cam is immobilized in rotation while the shoes are locked

Two-Stage Winch for Kites and Tethered Balloons or Blimps

Science.gov (United States)

Miles, Ted; Bland, Geoff

2011-01-01

A winch system provides a method for launch and recovery capabilities for kites and tethered blimps or balloons. Low power consumption is a key objective, as well as low weight for portability. This is accomplished by decoupling the tether-line storage and wind ing/ unwinding functions, and providing tailored and efficient mechanisms for each. The components of this system include rotational power input devices such as electric motors or other apparatus, line winding/unwinding reel(s), line storage reel(s), and independent drive trains. Power is applied to the wind/unwind reels to transport the tether line. Power is also applied to a line storage reel, from either the wind/unwind power source, the wind/unwind reel itself, or separate power source. The speeds of the two reels are synchronized, but not dependent on each other. This is accomplished via clutch mechanisms, variable transmissions, or independent motor controls. The speed of the storage reel is modulated as the effective diameter of the reel changes with line accumulation.

Progress towards all-chemical superconducting YBa{sub 2}Cu{sub 3}O{sub 7}-coated conductors

Energy Technology Data Exchange (ETDEWEB)

Obradors, X [Institut de Ciencia de Materials de Barcelona, CSIC Campus de la UAB, 08193 Bellaterra (Spain); Puig, T [Institut de Ciencia de Materials de Barcelona, CSIC Campus de la UAB, 08193 Bellaterra (Spain); Pomar, A [Institut de Ciencia de Materials de Barcelona, CSIC Campus de la UAB, 08193 Bellaterra (Spain)

2006-03-15

Chemical solution deposition (CSD) has recently emerged as a very competitive technique for obtaining epitaxial films of high quality with controlled nanostructure. In particular, the all-CSD approach is considered to be one of the most promising approaches for cost-effective production of second-generation superconducting wires. The trifluoroacetate (TFA) route is a very versatile route for achieving epitaxial YBa{sub 2}Cu{sub 3}O{sub 7} (YBCO) layers with high critical currents. In this work, recent advances towards improvement of the performance of several conductor architectures based on the YBCO TFA process will be presented. We show that new improved anhydrous TFA precursors allow a significant shortening of the pyrolysis time ({approx}1.5 h), and we have increased the total film thickness in a single deposition using polymeric additives. On the other hand, further understanding of the YBCO nucleation and growth process has allowed us to obtain a controlled microstructure and high critical currents (J{sub c}{approx}4-5 MA cm{sup -2} and I{sub c}{approx}300 A cm{sup -1} width at 77 K). The growth conditions (CSD) and post-processing conditions (sputtering and CSD) for the underlying oxide cap and buffer layers (CeO{sub 2}, BaZrO{sub 3}, SrTiO{sub 3}, La{sub 2}Zr{sub 2}O{sub 7} (La,Sr)MnO{sub 3}) and of self-organized nanostructures (CeO{sub 2}, BaZrO{sub 3}) deposited by CSD have been investigated to obtain high-quality interfaces in multilayered systems. Different single-crystal or metallic substrates (YSZ-IBAD (yttrium stabilized zirconia-ion beam assisted deposition) and Ni-RABiT (rolling assisted biaxial texturing)) have been investigated and long ({approx}10 m) CSD biaxially textured buffers (CeO{sub 2}, La{sub 2}Zr{sub 2}O{sub 7}) have been grown on Ni-RABiT substrates using a reel-to-reel system. High-performance TFA-YBCO-coated conductors have been obtained on vacuum-based buffer layers (I{sub c}{approx}140 A cm{sup -1} width) and on CSD buffer layers

Covalent Bonding of Thermoplastics to Rubbers for Printable, Reel-to-Reel Processing in Soft Robotics and Microfluidics.

Science.gov (United States)

Taylor, Jay M; Perez-Toralla, Karla; Aispuro, Ruby; Morin, Stephen A

2018-02-01

The lamination of mechanically stiff structures to elastic materials is prevalent in biological systems and popular in many emerging synthetic systems, such as soft robotics, microfluidics, stretchable electronics, and pop-up assemblies. The disparate mechanical and chemical properties of these materials have made it challenging to develop universal synthetic procedures capable of reliably adhering to these classes of materials together. Herein, a simple and scalable procedure is described that is capable of covalently laminating a variety of commodity ("off-the-shelf") thermoplastic sheets to silicone rubber films. When combined with laser printing, the nonbonding sites can be "printed" onto the thermoplastic sheets, enabling the direct fabrication of microfluidic systems for actuation and liquid handling applications. The versatility of this approach in generating thin, multifunctional laminates is demonstrated through the fabrication of milliscale soft actuators and grippers with hinged articulation and microfluidic channels with built-in optical filtering and pressure-dependent geometries. This method of fabrication offers several advantages, including technical simplicity, process scalability, design versatility, and material diversity. The concepts and strategies presented herein are broadly applicable to the soft robotics, microfluidics, and advanced and additive manufacturing communities where hybrid rubber/plastic structures are prevalent. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Enhancement of flux pinning of TFA-MOD YBCO thin films by embedded nanoscale Y2O3

International Nuclear Information System (INIS)

Cui, X M; Tao, B W; Tian, Z; Xiong, J; Zhang, X F; Li, Y R

2006-01-01

YBCO films with different levels of excess yttrium were prepared on single-crystal LaAlO 3 with metal-organic deposition using trifluoroacetates (TFA-MOD). X-ray diffraction and transmission electron microscope measurements revealed excess yttrium in YBCO in the form of nanoscale Y 2 O 3 with (400) preferred orientation. The field dependence of J c demonstrated that YBCO films with Y 2 O 3 doping had enhanced J c in comparison with stoichiometric YBCO films in the magnetic fields. We think the reason for this is that the Y 2 O 3 nanoparticles act as pinning centres. YBCO films with 60% yttrium excess display 43% increased J c compared to stoichiometric YBCO films at a magnetic field of 1 T

Progress of long coated conductors fabrication with fluorine-free CSD method at SWJTU

International Nuclear Information System (INIS)

Zhao, Y.; Wang, W.T.; Lei, M.; Pu, M.H.; Zhang, Y.; Cheng, C.H.

2013-01-01

Highlights: • Recent progress on the long coated conductors fabrication by F-free CSD method is presented. • Single buffer and partial-melting technology and slot-die coating methods have been developed. • Reel-to-reel facilities for continuous process have been achieved. -- Abstract: Recent progress on the fabrication of long high-T c superconducting coated conductors with a fluorine-free chemical solution deposition (CSD) method is presented. Developments including such novel methods as single buffer technology, partial-melting process on YBa 2 Cu 3 O 7 (YBCO), slot-die coating and drying; reel-to-reel facilities for continuous process have been achieved in the effort on high-T c superconducting coated conductors at SWJTU, which form a comprehensive technology to fabricate long coated tapes with high performances

Progress of long coated conductors fabrication with fluorine-free CSD method at SWJTU

Energy Technology Data Exchange (ETDEWEB)

Zhao, Y., E-mail: yzhao@swjtu.edu.cn [Key Lab of Advanced Materials Technologies, Key Lab of Magnetic Levitation Technologies and Maglev Trains (Ministry of Education), Superconductivity and New Energy Center (SNEC), Southwest Jiaotong University, Chengdu 610031 (China); School of Materials Science and Engineering, University of New South Wales, Sydney 2052, NSW (Australia); Wang, W.T.; Lei, M.; Pu, M.H.; Zhang, Y. [Key Lab of Advanced Materials Technologies, Key Lab of Magnetic Levitation Technologies and Maglev Trains (Ministry of Education), Superconductivity and New Energy Center (SNEC), Southwest Jiaotong University, Chengdu 610031 (China); Cheng, C.H. [School of Materials Science and Engineering, University of New South Wales, Sydney 2052, NSW (Australia)

2013-10-15

Highlights: • Recent progress on the long coated conductors fabrication by F-free CSD method is presented. • Single buffer and partial-melting technology and slot-die coating methods have been developed. • Reel-to-reel facilities for continuous process have been achieved. -- Abstract: Recent progress on the fabrication of long high-T{sub c} superconducting coated conductors with a fluorine-free chemical solution deposition (CSD) method is presented. Developments including such novel methods as single buffer technology, partial-melting process on YBa{sub 2}Cu{sub 3}O{sub 7} (YBCO), slot-die coating and drying; reel-to-reel facilities for continuous process have been achieved in the effort on high-T{sub c} superconducting coated conductors at SWJTU, which form a comprehensive technology to fabricate long coated tapes with high performances.

Studies on Tasar Cocoon Cooking Using Permeation Method

Science.gov (United States)

Javali, Uday C.; Malali, Kiran B.; Ramya, H. G.; Naik, Subhas V.; Padaki, Naveen V.

2018-02-01

Cocoon cooking is an important process before reeling of tasar silk yarn. Cooking ensures loosening of the filaments in the tasar cocoons thereby easing the process of yarn withdrawal during reeling process. Tasar cocoons have very hard shell and hence these cocoons need chemical cooking process to loosen the silk filaments. Attempt has been made in this article to study the effect of using vacuum permeation chamber for tasar cocoon cooking in order to reduce the cooking time and improve the quality of tasar silk yarn. Vacuum assisted permeation cooking method has been studied in this article on tasar daba cocoons for cooking efficiency, deflossing and reelability. Its efficiency has been evaluated with respect to different cooking methods viz, traditional and open pan cooking methods. The tasar silk produced after reeling process has been tested for fineness, strength and cohesion properties. Results indicate that permeation method of tasar cooking ensures uniform cooking with higher efficiency along with better reeling performance and improved yarn properties.

Design of Human-machine Interaction Auto-control System of Solar-powered Hose Reel Sprinkler Based on DSP and ARM%基于DSP和ARM的人机交互绞盘式太阳能喷灌机控制系统设计

Institute of Scientific and Technical Information of China (English)

王昌伟; 朱德兰; 张林; 王斌; 刘柯楠; 陈昕

2015-01-01

针对目前市场上传统的采用水涡轮驱动的绞盘式喷灌机存在的能耗大，对灌溉水泥沙含量要求高，调速装置结构复杂及PE管易牵折等问题，联合采用高性能光伏M PPT 控制永磁无刷电机，基于DSP和ARM 两款微处理器，借助现代传感检测、无线传输及可视化触控技术，设计了一种人机交互绞盘式太阳能喷灌机智能控制系统。通过对系统的性能测试验证表明：修正步长的P&O法能有效地提高系统M PPT 速度和准确度，增加光伏组件转换率；系统调速性能平稳，动态响应快；系统工作性能可靠，灌溉质量高，推广应用前景广阔。%Because the traditional hose reel sprinkler driven by hydraulic turbine has the shortcomings of high energy and water con‐sumption ,high requirements for silt content of irrigation water ,complex structure of speed regulating device and easy break of PE pipe of current market ,this article designs an intelligent human-machine interaction control system of solar-powered hose reel sprin‐kler ,of which the reel is driven through high performance photovoltaic brushless PM motor and hydraulic turbine based on DSP and ARM ,and the modern sensor technology ,wireless transmission technology and visual touch technology use are used .It's showed that variable step length P&O method can effectively improve the MPPT speed and accuracy ,the system can provide a stable speed char‐acteristic and fast dynamic response and improve the conversion rate of PV module ;the unit has high irrigation quality and reliable work performance through verifying the performance .In general ,the system has broad application and promotion prospects .

Tape transport mechanism

International Nuclear Information System (INIS)

Groh, E.F.; McDowell, W.; Modjeski, N.S.; Keefe, D.J.; Groer, P.

1979-01-01

A device is provided for transporting, in a stepwise manner, tape between a feed reel and takeup reel. An indexer moves across the normal path of the tape displacing it while the tape on the takeup reel side of the indexer is braked. After displacement, the takeup reel takes up the displaced tape while the tape on the feed reel side of the indexer is braked, providing stepwise tape transport in precise intervals determined by the amount of displacement caused by the indexer

High Critical Current in Metal Organic Derived YBCO Films

Science.gov (United States)

2010-10-31

process, particularly in reel-to- reel manufacturing equipment. During Phase I, a “three-step” conversion process was developed to de- convolute the...Task 3. After reaction, the 40-mm web was coated on both sides with a silver layer then slit into eight 4-mm width tapes which were laminated between

Coupling of a real time computer to nuclear detectors systems; Couplage d'un calculateur en temps reel a un ensemble experimental de detection

Energy Technology Data Exchange (ETDEWEB)

Lugol, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-06-01

Electronic computers are now included in nuclear physics experiment systems. This corresponds to a general trend to replace conventional multichannel analyzers by on line, real time, computers. An one line computer performing nuclear data acquisition and storage, offers the advantage of reduction and calculation routines in real time. This advantage becomes a need when the number of experimental parameters increase. At the Saclay variable energy cyclotron we have connected a C 90-10 computer of C.I.I. We describe the input/output hardware features. In order to establish a dialogue with physicists, we have built a main display unit able to control many display consoles at different points: we describe them as well as some utility routines. (author) [French] Les experiences de physique nucleaire font appel, de plus en plus, a des calculateurs electroniques. Ceux-ci se substituent alors aux analyseurs multicanaux traditionnels. Un calculateur en ligne assurant l'acquisition et le stockage des donnees experimentales, presente l'avantage de pouvoir executer, en temps reel, des programmes simples de calcul et de reduction. Nous montrons la necessite de prise en charge, par un calculateur, des experiences de physique nucleaire ou le nombre des parametres experimentaux devient important. Au cyclotron a energie variable de Saclay, la solution retenue est l'emploi d'un calculateur C 90-10 de la C.I.I. Nous decrivons les interfaces necessaires au couplage. Afin d'assurer un dialogue avec les physiciens, un systeme de visualisation est realise; nous le decrivons ainsi que quelques programmes types d'utilisation de l'ensemble du systeme. (auteur)

Going to the MALL: Mobile Assisted Language Learning

Science.gov (United States)

Chinnery, George M.

2006-01-01

Practically since their availability, a succession of audiovisual recording devices (e.g., reel-to-reel, VCRs, PCs) has been used to capture language samples, and myriad playback and broadcast devices (e.g., phonographs, radios, televisions) have provided access to authentic speech samples. The espousal of audiolingual theory in the 1950s brought…

Intermediate phase evolution in YBCO thin films grown by the TFA process

International Nuclear Information System (INIS)

Zalamova, K; Pomar, A; Palau, A; Puig, T; Obradors, X

2010-01-01

The YBCO thin film growth process from TFA precursors involves a complex reaction path which includes several oxide, fluoride and oxyfluoride intermediate phases, and the final microstructure and properties of the films are strongly influenced by the morphological and chemical evolution of these intermediate phases. In this work we present a study of the evolution of the intermediate phases involved in the TFA YBCO growth process under normal pressure conditions and we show that the oxygen partial pressure during pyrolysis of the TFA precursors is an important parameter. The Cu phase after the TFA pyrolysis can be either CuO, Cu 2 O or a mixture of both as the oxygen partial pressure is modified. The kinetics evolution of the intermediate phases has been determined for films pyrolysed in oxygen and nitrogen atmospheres and it is concluded that non-equilibrium phase transformations influence the reaction path towards epitaxial YBCO films and its microstructure. The intermediate phase evolution in these two series of films is summarized in kinetic phase diagrams.

Future opportunities in production of disposable optics and electronics

Science.gov (United States)

Korhonen, Raimo

2001-05-01

The several production methods of paper processing chain can be used, by analogy, to generate novel ideas for production of optics and electronics. Paper processing is a very fast reel-to-reel process: In the beginning of the paper web production the process is running at the speed of over thousand meters per minute and the web width can be 10 meters, and still at the later stages the speed is several hundreds of meters per minute with the web width of a couple of meters. There are several potential reel-to-reel production methods like embossing, printing, laminating and different kinds of vacuum coating, for example evaporation and sputtering. End products are complex multi-layer composite structures. The benefits from this analogy for optics and electronics would be ideas for ultra fast production, paper-like disposable and recyclable products and the integration of optics and electronics into ordinary things like books, wallpapers, tissue papers and packages. Two experiments are presented to demonstrate the possibilities. In the first experiment optical patterns are embossed directly on paper. In the second one conductive polymers are printed on paper and plastic webs. In future, a wide network of cooperation will be needed to realize all the opportunities.

Real EPC. A method to assess the energy efficiency of newly built houses in practice; Reele EPC. Een methode voor de beoordeling van de energieprestatie van nieuwbouwwoningen in de praktijk

Energy Technology Data Exchange (ETDEWEB)

Menkveld, M.; Sipma, J.M. [ECN Beleidsstudies, Petten (Netherlands); Cozijnsen, E.; Leidelmeijer, K. [RIGO research en Advies, Amsterdam (Netherlands)

2013-12-15

In this report we describe a method to compare the energy performance in use with the energy performance calculation of newly build houses. We put the average real energy use of a project in the calculation method of the energy performance of new houses. In that way we could compare the energy performance of the building permit with the real performance in practice. Because the calculation method normalizes the energy use of a house by its user surface and surface of building shell, the energy performance of different projects could be compared also when the projects exist of different dwelling types. Also the energy performance of different energy concepts could be compared such as all-electric houses with a heat pump or houses with a gas fired condensing boiler [Dutch] Agentschap NL is betrokken bij veel nieuwbouwprojecten. Een grote vraag is altijd of in de praktijk ook de prestaties worden gehaald die van te voren werden verwacht. Agentschap NL heeft voorgesteld hiervoor een maat te ontwikkelen, namelijk de Reele EPC. ECN heeft deze methodiek uitgewerkt om van woningbouwprojecten de energieprestatie in de praktijk te vergelijken met de geplande EPC. Het idee is dat de energieprestatie in de praktijk wordt uitgedrukt in een reële EPC (de R-EPC)

Metrology challenges for high-rate nanomanufacturing of polymer structures

Science.gov (United States)

Mead, Joey; Barry, Carol; Busnaina, Ahmed; Isaacs, Jacqueline

2012-10-01

The transfer of nanoscience accomplishments into commercial products is hindered by the lack of understanding of barriers to nanoscale manufacturing. We have developed a number of nanomanufacturing processes that leverage available high-rate plastics fabrication technologies. These processes include directed assembly of a variety of nanoelements, such as nanoparticles and nanotubes, which are then transferred onto a polymer substrate for the fabrication of conformal/flexible electronic materials, among other applications. These assembly processes utilize both electric fields and/or chemical functionalization. Conducting polymers and carbon nanotubes have been successfully transferred to a polymer substrate in times less than 5 minutes, which is commercially relevant and can be utilized in a continuous (reel to reel/roll to roll) process. Other processes include continuous high volume mixing of nanoelements (CNTs, etc) into polymers, multi-layer extrusion and 3D injection molding of polymer structures. These nanomanufacturing processes can be used for wide range of applications, including EMI shielding, flexible electronics, structural materials, and novel sensors (specifically for chem/bio detection). Current techniques to characterize the quality and efficacy of the processes are quite slow. Moreover, the instrumentation and metrology needs for these manufacturing processes are varied and challenging. Novel, rapid, in-line metrology to enable the commercialization of these processes is critically needed. This talk will explore the necessary measurement needs for polymer based nanomanufacturing processes for both step and continuous (reel to reel/roll to roll) processes.

Apparatus producing constant cable tension for intermittent demand

Science.gov (United States)

Lauritzen, Ted

1985-01-01

The disclosed apparatus produces constant tension in superconducting electrical cable, or some other strand, under conditions of intermittent demand, as the cable is unreeled from a reel or reeled thereon. The apparatus comprises a pivotally supported swing frame on which the reel is rotatably supported, a rotary motor, a drive train connected between the motor and the reel and including an electrically controllable variable torque slip clutch, a servo transducer connected to the swing frame for producing servo input signals corresponding to the position thereof, a servo control system connected between the transducer and the clutch for regulating the torque transmitted by the clutch to maintain the swing frame in a predetermined position, at least one air cylinder connected to the swing frame for counteracting the tension in the cable, and pressure regulating means for supplying a constant air pressure to the cylinder to establish the constant tension in the cable, the servo system and the clutch being effective to produce torque on the reel in an amount sufficient to provide tension in the cable corresponding to the constant force exerted by the air cylinder. The drive train also preferably includes a fail-safe brake operable to its released position by electrical power in common with the servo system, for preventing rotation of the reel if there is a power failure. A shock absorber and biasing springs may also be connected to the swing frame, such springs biasing the frame toward its predetermined position. The tension in the cable may be measured by force measuring devices engageable with the bearings for the reel shaft, such bearings being supported for slight lateral movement. The reel shaft is driven by a Shmidt coupler which accommodates such movement.

Apparatus producing constant cable tension for intermittent demand

International Nuclear Information System (INIS)

Lauritzen, T.

1985-01-01

The disclosed apparatus produces constant tension in superconducting electrical cable, or some other strand, under conditions of intermittent demand, as the cable is unreeled from a reel or reeled thereon. The apparatus comprises a pivotally supported swing frame on which the reel is rotatably supported, a rotary motor, a drive train connected between the motor and the reel and including an electrically controllable variable torque slip clutch, a servo transducer connected to the swing frame for producing servo input signals corresponding to the position thereof, a servo control system connected between the transducer and the clutch for regulating the torque transmitted by the clutch to maintain the swing frame in a predetermined position, at least one air cylinder connected to the swing frame for counteracting the tension in the cable, and pressure regulating means for supplying a constant air pressure to the cylinder to establish the constant tension in the cable, the servo system and the clutch being effective to produce torque on the reel in an amount sufficient to provide tension in the cable corresponding to the constant force exerted by the air cylinder. The drive train also preferably includes a fail-safe brake operable to its released position by electrical power in common with the servo system, for preventing rotation of the reel if there is a power failure. A shock absorber and biasing springs may also be connected to the swing frame, such springs biasing the frame toward its predetermined position. The tension in the cable may be measured by force measuring devices engageable with the bearings for the reel shaft, such bearings being supported for slight lateral movement. The reel shaft is driven by a Shmidt coupler which accommodates such movement

Quantitative analysis of reflection electron energy loss spectra to determine electronic and optical properties of Fe–Ni alloy thin films

International Nuclear Information System (INIS)

Tahir, Dahlang; Oh, Sukh Kun; Kang, Hee Jae; Tougaard, Sven

2016-01-01

Highlights: • Electronic and optical properties of Fe-Ni alloy thin films grown on Si (1 0 0) were studied via quantitative analyses of reflection electron energy loss spectra (REELS). • The energy loss functions (ELF) are dominated by a plasmon peak at 23.6 eV for Fe and moves gradually to lower energies in Fe-Ni alloys towards the bulk plasmon energy of Ni at 20.5 eV. • Fe has a strong effect on the dielectric and optical properties of Fe-Ni alloy thin films even for an alloy with 72% Ni. Electronic and optical properties of Fe-Ni alloy thin films grown on Si (1 0 0) were studied via quantitative analyses of reflection electron energy loss spectra (REELS). - Abstract: Electronic and optical properties of Fe–Ni alloy thin films grown on Si (1 0 0) by ion beam sputter deposition were studied via quantitative analyses of reflection electron energy loss spectra (REELS). The analysis was carried out by using the QUASES-XS-REELS and QUEELS-ε(k,ω)-REELS softwares to determine the energy loss function (ELF) and the dielectric functions and optical properties by analyzing the experimental spectra. For Ni, the ELF shows peaks around 3.6, 7.5, 11.7, 20.5, 27.5, 67 and 78 eV. The peak positions of the ELF for Fe_2_8Ni_7_2 are similar to those of Fe_5_1Ni_4_9, even though there is a small peak shift from 18.5 eV for Fe_5_1Ni_4_9 to 18.7 eV for Fe_2_8Ni_7_2. A plot of n, k, ε_1, and ε_2 shows that the QUEELS-ε(k,ω)-REELS software for analysis of REELS spectra is useful for the study of optical properties of transition metal alloys. For Fe–Ni alloy with high Ni concentration (Fe_2_8Ni_7_2), ε_1, and ε_2 have strong similarities with those of Fe. This indicates that the presence of Fe in the Fe–Ni alloy thin films has a strong effect.

Band gap and defect states of MgO thin films investigated using reflection electron energy loss spectroscopy

Directory of Open Access Journals (Sweden)

Sung Heo

2015-07-01

Full Text Available The band gap and defect states of MgO thin films were investigated by using reflection electron energy loss spectroscopy (REELS and high-energy resolution REELS (HR-REELS. HR-REELS with a primary electron energy of 0.3 keV revealed that the surface F center (FS energy was located at approximately 4.2 eV above the valence band maximum (VBM and the surface band gap width (EgS was approximately 6.3 eV. The bulk F center (FB energy was located approximately 4.9 eV above the VBM and the bulk band gap width was about 7.8 eV, when measured by REELS with 3 keV primary electrons. From a first-principles calculation, we confirmed that the 4.2 eV and 4.9 eV peaks were FS and FB, induced by oxygen vacancies. We also experimentally demonstrated that the HR-REELS peak height increases with increasing number of oxygen vacancies. Finally, we calculated the secondary electron emission yields (γ for various noble gases. He and Ne were not influenced by the defect states owing to their higher ionization energies, but Ar, Kr, and Xe exhibited a stronger dependence on the defect states owing to their small ionization energies.

A LA FRONTIERE DU REEL : LES SERIES, UN OVNI PEDAGOGIQUE

OpenAIRE

Dreyfuss, Laurence; Rascol-Boutard, Sylvie

2016-01-01

International audience; Cette communication entend soumettre aux chercheurs et praticiens une réflexion construite sur les représentations que les séries portent sur des enjeux sociétaux, en particulier, pour ce qui concerne le monde du travail et/ou l'analyse des organisations. A ce titre, elles peuvent constituer un objet tiers-médiateur de transmission de savoirs sur les organisations et comportements organisationnels. Afin de nous concentrer sur la question de la diffusion de modèles mana...

Prospects for using new methods of metal plastic working in power engineering

International Nuclear Information System (INIS)

Bondarenko, V.T.; Koltunov, V.M.

1979-01-01

Reviewed are new promising methods of plastic working, for the production of NPS equipment. Shown is the efficiency of rotary shaping for the production of large-sized articles of cylindrical or conical configuration, cold working on roller reeling mills and combining the reeling and forming to produce one-layer and multilayer bottoms of pressure vessels. A number of ways to expand and cut tubes for steam generators is marked and the information on equipment for these processes is given

Process for forming thin film, heat treatment process of thin film sheet, and heat treatment apparatus therefor

International Nuclear Information System (INIS)

Watanabe, S.

1984-01-01

The invention provides a process for forming a magnetic thin film on a base film, a heat treatment process of a thin film sheet consisting of the base film and the magnetic thin film, and an apparatus for performing heat treatment of the thin film sheet. Tension applied to the thin film sheet is substantially equal to that applied to the base film when the magnetic thin film is formed thereon. Then, the thin film sheet is treated with heat. The thin film sheet is heated with a given temperature gradient to a reactive temperature at which heat shrinkage occurs, while the tension is being applied thereto. Thereafter, the thin film sheet to which the tension is still applied is cooled with substantially the same temperature gradient as applied in heating. The heat treatment apparatus has a film driving unit including a supply reel, a take-up reel, a drive source and guide rollers; a heating unit including heating plates, heater blocks and a temperature controller for heating the sheet to the reactive temperature; and a heat insulating unit including a thermostat and another temperature controller for maintaining the sheet at the nonreactive temperature which is slightly lower than the reactive temperature

Elevator mechanism and method for scintillation detectors

International Nuclear Information System (INIS)

Frank, E.

1975-01-01

An elevator mechanism and method for raising and lowering radioactive samples through a shielded vertical counting chamber in a benchtop scintillation detector is described. The elevator mechanism adds little or nothing to the height of the detector by using an elongated flexible member such as a metal tape secured to the bottom of the elevator platform and extending downwardly through the counting chamber and its bottom shielding, where the tape is bent laterally for connection to a drive means. In the particular embodiment illustrated, the tape is bent laterally below the bottom shielding for the counting chamber, and then upwardly along or through one side of the shielding to a reel at the top of the shielding. The tape is wound onto the reel, and the reel is driven by a reversible motor which winds and unwinds the tape on the reel to raise and lower the elevator platform

Dynamic and thermodynamic mechanisms of TFA adsorption by particulate matter.

Science.gov (United States)

Guo, Junyu; Zhai, Zihan; Wang, Lei; Wang, Ziyuan; Wu, Jing; Zhang, Boya; Zhang, Jianbo

2017-06-01

Trifluoroacetic acid (TFA) in the atmosphere is produced by degradation of hydrochlorofluorocarbons and hydrofluorocarbons. In recent years, TFA has attracted global attention because of increased environmental concentrations, biological toxicity and accumulation in aqueous environments. This study focused on the mechanisms underlying the adsorption of TFA by particulate matter to identify the appropriate descriptive model for this process and thus improve estimation of TFA adsorption in future environmental monitoring. Onsite gas and particle phase sampling in Beijing, China, and subsequent measurement of TFA concentrations indicated that the TFA concentration in the gas phase (1396 ± 225 pg m -3 ) was much higher than that in the particle phase (62 ± 8 pg m -3 ) and that monthly concentrations varied seasonally with temperature. Based on the field results and analysis, an adsorption experiment of TFA on soot was then conducted at three different temperatures (293, 303, and 313 K) to provide parameters for kinetic and thermodynamic modelling. The proportion of atmospheric TFA concentration in the gas phase increased with temperature, indicating that temperature affected the phase distribution of TFA. The subsequent kinetic and thermodynamic modelling showed that the adsorption of TFA by soot could be described well by the Bangham kinetic model. The adsorption was controlled by diffusion, and the key mechanism was physical adsorption. The adsorption behavior can be well described by the Langmuir isotherm model. The calculated thermodynamic parameters ΔG° (-2.34, -1.25, and -0.15 kJ mol -1  at 293, 303, and 313 K, respectively), ΔH° (-34.34 kJ mol -1 ), and ΔS° (-109.22 J mol -1  K -1 ) for TFA adsorption by soot were negative, indicating that adsorption was a spontaneous, exothermic process. Copyright © 2017 Elsevier Ltd. All rights reserved.

Mechanical Behaviour of Lined Pipe

NARCIS (Netherlands)

Hilberink, A.

2011-01-01

Installing lined pipe by means of the reeling installation method seems to be an attractive combination, because it provides the opportunity of eliminating the demanding welds from the critical time offshore and instead preparing them onshore. However, reeling of lined pipe is not yet proven

Investigation of Jc-Suppressing Factors in Flat-Rolled Sr0.6K0.4Fe2As2Fe Tapes Via Microstructure Analysis

KAUST Repository

Zhang, Xianping; Wang, Qingxiao; Li, Kun; Cai, Yao; Jiang, Fuguo; Wang, Zhen; Li, Jianqi; Yao, Chao; Lin, He; Zhang, Qianjun; Dong, Chiheng; Wang, Dongliang; Zhang, Xixiang; Ma, Yanwei

2015-01-01

Pnictide superconductors will be very promising for applications if wires with high critical current density Jc can allow reel-to-reel large-scale fabrication at low costs. To understand the mechanism(s) that limited Jc in flat-rolled Sr0.6K0.4Fe2As

Conception and fabrication of a real time automatic correlator (multi-correlator); Etude et realisation d'un correlateur automatique (multicorrelateur) fonctionnant en temps reel

Energy Technology Data Exchange (ETDEWEB)

Berthier, D [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-10-01

The purpose of this work is to elaborate a specific computer able to display the real.time correlation function of two variables represented by two electrical signals. The various functions to be done are dealt with the best suited technology: delays from numerical method, hybrid multiplication, analog integration. This method proved very versatile so that it has been possible to modify the circuits with more performing components without changing the general conception of the whole system. In particular, the bandwidth, which was originally 125 kHz (1966) is now 1 MHz and will be 5 MHz, January 1968. Many results are obtained from the correlator such as: - determination of pulse responses of linear systems (1. and 2. order filters, oscillating circuits); - extraction of signals from noise; - measurement of time and space correlation in a turbulent plasma; - treatment of electro-biological signals. (author) [French] Nous nous sommes proposes de concevoir un calculateur specialise pour l'estimation en temps reel de la fonction de correlation de deux phenomenes representes par deux tensions electriques. Il a ete retenu les procedes de calcul s'adaptant le mieux aux diverses fonctions a realiser: retard par une technique numerique, multiplication hybride, integration analogique. Cette methode s'est revelee tres souple d'emploi: en effet les circuits ont pu etre modifies, sans changer la conception de l'appareil, au fur et a mesure de l'evolution des performances des composants electroniques. Ainsi la bande passante de l'appareil qui initialement etait de 125 KHz (1966) est actuellement de 1 MHz et sera 5 MHz en janvier 1968. De nombreux resultats ont ete obtenus avec l'appareil: - determination de reponses impulsionnelles de systemes lineaires (filtres 1er ordre, 2eme ordre, circuit oscillant, etc... ); - detection de signaux dans le bruit; - mesure de correlation spatiale et temporelle dans le plasma - traitement de signaux electrobiologiques. (auteur)

Electroplated superconducting wire

International Nuclear Information System (INIS)

Peger, C.H.

1991-01-01

A hard chromium solution has been considered the least efficient of all plating solutions. This is not exactly true if the correct plating conditions are used. The accepted efficiency is only 12% but that is only true for the parameters that were used long ago to make the determination. At 12% efficiency it would be impossible to plate Superconductor wire. The world's chromium plating shops have been plating at a .001 (.025u) per hour rate since the turn of the century. Shops in the Cleveland, Ohio area have been limiting their plating rate to .006 (152u) since 1935. A few have used .012 (304u) to .030 (762u) per hour for specialized jobs. These figures would indicate the apparent efficiency of the old 100 to 1 chromium, sulfate solution can be higher than 60%. The industry uses a 3 bus bar tank with wide spacing between anode and cathode. This results in high solution resistance and high heat generation and consequently slow plating rates. The Reversible Rack 2 Bus Bar System uses very close anode to cathode spacings. This results in the high plating rates with improved quality deposits. When first asked to chromium plate pure nickel wire reel to reel in long lengths, companies making reel to reel machines were asked if chromium plating was practical. In every case, the answer was it couldn't be done. Gold, tin and zinc plating was being done reel to reel. Using the same parameters that were used to determine a chromium solution efficiency was only 12%, these other metal solutions check out close to 100%

75 FR 9531 - Magnuson-Stevens Act Provisions; Correction

Science.gov (United States)

2010-03-03

... for comment are not required pursuant to 5 U.S.C. 553, or any other law, the analytical requirements..., rod and reel, spear, trap, slurp gun, hand harvest. C. Charter fishery C. Bandit gear, buoy gear..., gillnet, hand harvest, seine, slurp gun, trap, spear, rod and reel, hook and line. 12. Recreational...

16 CFR 1205.1 - Scope of the standard.

Science.gov (United States)

2010-01-01

... requirements of the standard apply to rotary mowers. The labeling requirements apply to both rotary and reel...-behind rotary and reel-type power lawn mowers manufactured or imported on or after the effective date of... mm) that employs an engine or motor as a power source. Section 3(a)(1) of the Consumer Product Safety...

die doeltreffendheid van die afrikaanse woordelys en spelreels

African Journals Online (AJOL)

sluiting by die reel vir die verdubbeling van medeklinkers na 'n kort, be- klemtoonde klinker, woorde soos ballet, ballon, terras, terrein, dissipel en dissipline slegs met een konsonant na die eerste vokaal gespel moes word, omdat daardie voorafgaande vokaal onbeklemtoon is. Ook hierdie uit- sondering op die reel word ...

Organic photovoltaics. Technology and market

International Nuclear Information System (INIS)

Brabec, Christoph J.

2004-01-01

Organic photovoltaics has come into the international research focus during the past three years. Up to now main efforts have focused on the improvement of the solar conversion efficiency, and in recent efforts 5% white light efficiencies on the device level have been realized. Despite this in comparison to inorganic technologies low efficiency, organic photovoltaics is evaluated as one of the future key technologies opening up completely new applications and markets for photovoltaics. The key property which makes organic photovoltaics so attractive is the potential of reel to reel processing on low cost substrates with standard coating and printing processes. In this contribution we discuss the economical and technical production aspects for organic photovoltaics

Electronic and optical properties of Fe, Pd, and Ti studied by reflection electron energy loss spectroscopy

International Nuclear Information System (INIS)

Tahir, Dahlang; Kraaer, Jens; Tougaard, Sven

2014-01-01

We have studied the electronic and optical properties of Fe, Pd, and Ti by reflection electron energy-loss spectroscopy (REELS). REELS spectra recorded for primary energies in the range from 300 eV to 10 keV were corrected for multiple inelastically scattered electrons to determine the effective inelastic-scattering cross section. The dielectric functions and optical properties were determined by comparing the experimental inelastic-electron scattering cross section with a simulated cross section calculated within the semi-classical dielectric response model in which the only input is Im(−1/ε) by using the QUEELS-ε(k,ω)-REELS software package. The complex dielectric functions ε(k,ω), in the 0–100 eV energy range, for Fe, Pd, and Ti were determined from the derived Im(−1/ε) by Kramers-Kronig transformation and then the refractive index n and extinction coefficient k. The validity of the applied model was previously tested and found to give consistent results when applied to REELS spectra at energies between 300 and 1000 eV taken at widely different experimental geometries. In the present paper, we provide, for the first time, a further test on its validity and find that the model also gives consistent results when applied to REELS spectra in the full range of primary electron energies from 300 eV to 10000 eV. This gives confidence in the validity of the applied method.

Organic solar cell modules for specific applications-From energy autonomous systems to large area photovoltaics

International Nuclear Information System (INIS)

Niggemann, M.; Zimmermann, B.; Haschke, J.; Glatthaar, M.; Gombert, A.

2008-01-01

We report on the development of two types of organic solar cell modules one for energy autonomous systems and one for large area energy harvesting. The first requires a specific tailoring of the solar cell geometry and cell interconnection in order to power an energy autonomous system under its specific operating conditions. We present an organic solar cell module with 22 interconnected solar cells. A power conversion efficiency of 2% under solar illumination has been reached on the active area of 46.2 cm 2 . A voltage of 4 V at the maximum power point has been obtained under indoor illumination conditions. Micro contact printing of a self assembling monolayer was employed for the patterning of the polymer anode. Large area photovoltaic modules have to meet the requirements on efficiency, lifetime and costs simultaneously. To minimize the production costs, a suitable concept for efficient reel-to-reel production of large area modules is needed. A major contribution to reduce the costs is the substitution of the commonly used indium tin oxide electrode by a cheap material. We present the state of the art of the anode wrap through concept as a reel-to-reel suited module concept and show comparative calculations of the module interconnection of the wrap through concept and the standard ITO-based cell architecture. As a result, the calculated overall module efficiency of the anode wrap through module exceeds the overall efficiency of modules based on ITO on glass (sheet resistance 15 Ω/square) and on foils (sheet resistance 60 Ω/square)

İhracata Dayalı Büyüme Hipotezi: Türkiye Uygulaması

Directory of Open Access Journals (Sweden)

İsmail KÜÇÜKAKSOY

2015-09-01

Full Text Available Bu çalışma Türkiye ekonomisi için 2003:1Q ve 2015:Q1 çeyreklik veriler kullanılarak “İhracata Dayalı Büyüme Hipotezi”nin geçerliliği test etmeyi amaçlamaktadır. Hipotez, reel ihracattan reel Gayri Safi Yurtiçi Hasıla’ya (GSYİH doğru nedensellik ilişkisi olduğunu iddia etmektedir. Çalışmada, Johansen koentegrasyon testi, Gregory-Hansen koentegrasyon testi, Toda-Yamamoto nedensellik testi, Tam Düzeltilmiş En Küçük Kareler Yöntemi (FMOLS, “Kanonik Koentegrasyon Regresyonu (CCR” ve “Dinamik En Küçük Kareler Yöntemi (DOLS” kullanılmıştır. Testler sonucunda elde edilen bulgular şunlardır: a Değişkenler arasında, Johansen koentegrasyon testine göre uzun dönemli bir ilişki yokken, Gregory-Hansen koentegrasyon testine göre uzun dönemli bir ilişki tespit edilmiştir; b Toda-Yamamoto testine göre reel ihracat ile reel GSYİH arasında çift yönlü nedensellik vardır. Bu bulgu Türkiye için ihracata dayalı büyüme hipotezinin geçerliliğini ispatlamaktadır; c FMOLS, CCR, DOLS yöntemlerine göre, uzun dönemde reel ihracatta meydana gelen %1’lik bir artış reel GSYİH’yı sırasıyla %1.5195, %1.5552, %1.3171 oranlarında arttırmaktadır. Her üç yöntem de ihracata dayalı büyüme hipotezini Türkiye ekonomisi için ispatlamaktadır.

Moving to a total VM environment

International Nuclear Information System (INIS)

Johnston, T.Y.

1981-01-01

The Stanford Linear Accelerator Center is a single purpose laboratory operated by Stanford University for the Department of Energy. Its mission is to do research in High Energy (particle) physics. This research involves the use of large and complex electronic detectors. Each of these detectors is a multi-million dollar device. A part of each detector is a computer for process control and data logging. Most detectors at SLAC now use VAX 11/780s for this purpose. Most detectors record digital data via this process control computer. Consequently, physics today is not bounded by the cost of analog to digital conversion as it was in the past, and the physicist is able to run larger experiments than were feasible a decade ago. Today a medium sized experiment will produce several hundred full reels of 6250 BPI tape whereas a large experiment is a couple of thousand reels. The raw data must first be transformed into physics events using data transformation programs. The physicists then use subsets of the data to understand what went on. The subset may be anywhere from a few megabytes to 5 or 6 gigabytes of data (30 or 40 full reels of tape). This searching would be best solved interactively (if computers and I/0 devices were fast enough). Instead what we find are very dynamic batch programs that are generally changed every run. The result is that on any day there are probably around 50 to 100 physicists interacting with a half dozen different experiments who are causing us to mount around 750 to 1000 tapes a day. This has been the style of computing for the last decade. Our going to VM is part of our effort to change this style of computing and to make physics computing more effective

PLOT REELED INTO AN EKPHRASIS IN BELLES LETTRES OF THE BEGINNING OF THE 20TH CENTURY

Directory of Open Access Journals (Sweden)

Elena Vasil’evna Astaschenko

2015-11-01

Full Text Available Plots reeled into the ekphrasis have always existed. In belles lettres of the beginning of the 20th century, the fight between the pagan and the Christian manifests in the opposition of scenic space and it creates a powerful «magnetic» field. This is a special type of mythologism in which the Christian imagery is on the positive side of the binary opposition with its respective system of ethical coordinates. In «polytheistic systems, the presentations of evil is static as of the essential and eternal beginning of the world», but in the orthodox Christianity, the devil is a ghost, lure, disembodied temptation and «with every day it approaches nonexistence» (from the «Moralia» of the 6th century by Gregory the Great. However, Gregory the Great also notes that the power of Satan is from God as all other powers, he just distorted his power with his God-given free will. Even at the level of worldly wisdom aphorisms there is a conventional belief that our shortcomings are the continuation of our merits, and therefore it is necessary to adhere to the golden mean. Accroding to A. Gracheva in the book «Dialogues of Janus: Belles lettres and classics in the Russian literature of the early twentieth century», at the beginning of the 19th century, the mythologism of the spontaneous and not experimental type (often encyclopaedic and «algebraic» like in the works of Joyce and Bely, is especially pronounced in the works of writers, who are close to mass literature with their democracy or «boudoir» and especially in the works of female writers. This is due both to existing archetypes of the collective unconscious (some of which are even atavistic and «migratory plots» which are characteristic of both folklore and popular culture. Despite the compelling erotic subject matter, belles lettres is not always frivolous and, on the contrary, it is edifying and full of moral questions, which are sometimes rhetorical: «What is a sin and what does the

Conception and fabrication of a real time automatic correlator (multi-correlator); Etude et realisation d'un correlateur automatique (multicorrelateur) fonctionnant en temps reel

Energy Technology Data Exchange (ETDEWEB)

Berthier, D. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-10-01

The purpose of this work is to elaborate a specific computer able to display the real.time correlation function of two variables represented by two electrical signals. The various functions to be done are dealt with the best suited technology: delays from numerical method, hybrid multiplication, analog integration. This method proved very versatile so that it has been possible to modify the circuits with more performing components without changing the general conception of the whole system. In particular, the bandwidth, which was originally 125 kHz (1966) is now 1 MHz and will be 5 MHz, January 1968. Many results are obtained from the correlator such as: - determination of pulse responses of linear systems (1. and 2. order filters, oscillating circuits); - extraction of signals from noise; - measurement of time and space correlation in a turbulent plasma; - treatment of electro-biological signals. (author) [French] Nous nous sommes proposes de concevoir un calculateur specialise pour l'estimation en temps reel de la fonction de correlation de deux phenomenes representes par deux tensions electriques. Il a ete retenu les procedes de calcul s'adaptant le mieux aux diverses fonctions a realiser: retard par une technique numerique, multiplication hybride, integration analogique. Cette methode s'est revelee tres souple d'emploi: en effet les circuits ont pu etre modifies, sans changer la conception de l'appareil, au fur et a mesure de l'evolution des performances des composants electroniques. Ainsi la bande passante de l'appareil qui initialement etait de 125 KHz (1966) est actuellement de 1 MHz et sera 5 MHz en janvier 1968. De nombreux resultats ont ete obtenus avec l'appareil: - determination de reponses impulsionnelles de systemes lineaires (filtres 1er ordre, 2eme ordre, circuit oscillant, etc... ); - detection de signaux dans le bruit; - mesure de correlation spatiale et temporelle dans le plasma - traitement de signaux

Increasing the efficiency of polymer solar cells by silicon nanowires

Energy Technology Data Exchange (ETDEWEB)

Eisenhawer, B; Sivakov, V; Pietsch, M; Andrae, G; Falk, F [Institute of Photonic Technology, Albert-Einstein-Strasse 9, 07743 Jena (Germany); Sensfuss, S, E-mail: bjoern.eisenhawer@ipht-jena.de [Thuringian Institute for Textile and Plastics Research, Breitscheidstrasse 97, 07407 Rudolstadt (Germany)

2011-08-05

Silicon nanowires have been introduced into P3HT:[60]PCBM solar cells, resulting in hybrid organic/inorganic solar cells. A cell efficiency of 4.2% has been achieved, which is a relative improvement of 10% compared to a reference cell produced without nanowires. This increase in cell performance is possibly due to an enhancement of the electron transport properties imposed by the silicon nanowires. In this paper, we present a novel approach for introducing the nanowires by mixing them into the polymer blend and subsequently coating the polymer/nanowire blend onto a substrate. This new onset may represent a viable pathway to producing nanowire-enhanced polymer solar cells in a reel to reel process.

Increasing the efficiency of polymer solar cells by silicon nanowires

International Nuclear Information System (INIS)

Eisenhawer, B; Sivakov, V; Pietsch, M; Andrae, G; Falk, F; Sensfuss, S

2011-01-01

Silicon nanowires have been introduced into P3HT:[60]PCBM solar cells, resulting in hybrid organic/inorganic solar cells. A cell efficiency of 4.2% has been achieved, which is a relative improvement of 10% compared to a reference cell produced without nanowires. This increase in cell performance is possibly due to an enhancement of the electron transport properties imposed by the silicon nanowires. In this paper, we present a novel approach for introducing the nanowires by mixing them into the polymer blend and subsequently coating the polymer/nanowire blend onto a substrate. This new onset may represent a viable pathway to producing nanowire-enhanced polymer solar cells in a reel to reel process.

Wellbore manufacturing processes for in situ heat treatment processes

Science.gov (United States)

Davidson, Ian Alexander; Geddes, Cameron James; Rudolf, Randall Lynn; Selby, Bruce Allen; MacDonald, Duncan Charles

2012-12-11

A method includes making coiled tubing at a coiled tubing manufacturing unit coupled to a coiled tubing transportation system. One or more coiled tubing reels are transported from the coiled tubing manufacturing unit to one or more moveable well drilling systems using the coiled tubing transportation system. The coiled tubing transportation system runs from the tubing manufacturing unit to one or more movable well drilling systems, and then back to the coiled tubing manufacturing unit.

Manipulations of the features of standard video lottery terminal (VLT) games: effects in pathological and non-pathological gamblers.

Science.gov (United States)

Loba, P; Stewart, S H; Klein, R M; Blackburn, J R

2001-01-01

The present study was conducted to identify game parameters that would reduce the risk of abuse of video lottery terminals (VLTs) by pathological gamblers, while exerting minimal effects on the behavior of non-pathological gamblers. Three manipulations of standard VLT game features were explored. Participants were exposed to: a counter which displayed a running total of money spent; a VLT spinning reels game where participants could no longer "stop" the reels by touching the screen; and sensory feature manipulations. In control conditions, participants were exposed to standard settings for either a spinning reels or a video poker game. Dependent variables were self-ratings of reactions to each set of parameters. A set of 2(3) x 2 x 2 (game manipulation [experimental condition(s) vs. control condition] x game [spinning reels vs. video poker] x gambler status [pathological vs. non-pathological]) repeated measures ANOVAs were conducted on all dependent variables. The findings suggest that the sensory manipulations (i.e., fast speed/sound or slow speed/no sound manipulations) produced the most robust reaction differences. Before advocating harm reduction policies such as lowering sensory features of VLT games to reduce potential harm to pathological gamblers, it is important to replicate findings in a more naturalistic setting, such as a real bar.

TFA Tanks Focus Area midyear review report FY 2000

Energy Technology Data Exchange (ETDEWEB)

LR Roeder-Smith

2000-05-02

In accordance with EM's office of Science and Technology (OST), the TFA is committed to assessing the maturity of technology development projects and ensuring their readiness for implementation and subsequent deployment. The TFA conducts an annual Midyear Review to document the status of ongoing projects, reaffirm and document user commitment to selected projects, and to improve the effective deployment of technology by determining and documenting the readiness of selected projects to move ahead. Since 1995, OST has used a linear technology maturation model that spans through seven defined stages of maturity, from basic research to implementation. Application of this Stage/Gate model to technology development resulted in prescriptive and somewhat cumbersome review procedures, resulting in limited and inconsistent use. Subsequently, in February 2000, OST issued revised guidance in an effort to streamline the technology tracking and review process. While the new OST guidance reinforces peer review requirements and the use of the American Society of Mechanical Engineers (ASME) for independent reviews, it also implements a simplified Gate model. The TFA is now responsible for providing auditable documentation for passing only three stages of technology maturity: ready for research (Gate 0); ready for development (Gate 2); ready for demonstration (Gate 5). The TFA Midyear Review is a key element in the overall review procedure, as the tracking evidence for all active projects is required to be available at this time. While the Midyear Report contains an overview of the status of all TFA reviews and projects, not all the reviews were conducted during the Midyear Review. The TFA used a phased approach to accomplish the Midyear Review requirements.

TFA Systems: A Unique Group Treatment of Spouse Abusers.

Science.gov (United States)

Clow, Daniel R.; And Others

1992-01-01

Presents a group treatment model using Thought-Feeling-Action (TFA) Systems, an offense- and offender-specific group treatment for abusers. Describes use of TFA Systems in group of court-referred male spouse-abusers. Reviews evolution of TFA Systems, then focuses on TFA Systems treatment of spouse abusers. Notes that system can be adapted to other…

Watching harmonics beat

Science.gov (United States)

Keeports, David

2015-04-01

Suppose you record a song on magnetic tape and duplicate your recording. You then simultaneously play back both tapes. To the rim of one of the tape reels, also known as the reel's flange, you keep applying gentle pressure and then releasing that pressure so that your reel alternates between slightly lagging the other and then catching up with it. The resulting small pitch differences between the two tapes give rise to an intriguing and pleasant sound often described as swirling or jet-like. A Wikipedia article1 lists dozens of popular songs that incorporate this "flanging" effect. Well represented are songs by the Beatles and Jimi Hendrix as well as by artists from recent decades. But perhaps the most important is an obscure 1945 recording by guitarist and musical inventor Les Paul, who is recognized as the discoverer of flanging.

Fabrication of cold-rolled bands of the alloy-ehi 702 in rolls

International Nuclear Information System (INIS)

Zhuchin, V.N.; Gindin, A.Sh.; Shaburov, V.E.; Vladimirov, S.M.; Sokolov, V.A.; Shavkun, V.V.; Perepelitsa, I.V.; Markov, V.V.; Naymov, E.P.; Evstaf'ev, P.P.

1977-01-01

The questions are discussed, connected with the manufacture of cold-rolled strip of alloy EI702 in reels from strip blanks. It has been established that in the manufacture of hot-rolled stock from EI702 slabs it is necessary to use powerful rolling equipment because of high resistance to deformation. The reel method for manufacturing EI702 alloy improves the rolled stock and increases percentage of serviceable stock, as well as the output

Tanks Focus Area (TFA) site needs assessment FY 2000

International Nuclear Information System (INIS)

RW Allen

2000-01-01

This report documents the process used by the Tanks Focus Area (TFA) to analyze and develop responses to technology needs submitted by five major U.S. Department of Energy (DOE) sites with radioactive tank waste problems, and the initial results of the analysis. The sites are the Hanford Site, Idaho National Engineering and Environmental Laboratory (INEEL), Oak Ridge Reservation (ORR), Savannah River Site (SRS), and West Valley Demonstration Project (WVDP). During the past year, the TFA established a link with DOE's Fernald site to exchange, on a continuing basis, mutually beneficial technical information and assistance

Phase Evolution of YBa2Cu3O7-x films by all-chemical solution deposition route for coated conductors

DEFF Research Database (Denmark)

Yue, Zhao; Tang, Xiao; Wu, Wei

2014-01-01

In order to understand the all-chemical-solution-deposition (CSD) processes for manufacturing coated conductors, we investigated the phase evolution of YBa2Cu3O7 (YBCO) films deposited by a low-fluorine metal-organic solution deposition (LF-MOD) method on CSD derived Ce0.9La0.1O2/Gd2Zr2O7/Ni......W. It is shown that the phase transition from the pyrolyzed film to fully converted YBCO film in the LF-MOD process is similar to that in typical trifluoroacetates-metal organic deposition (TFA-MOD) processes even though the amount of TFA in the solution is reduced by almost one half compared with typical TFA...

Tanks Focus Area (TFA) FY1999 Midyear Review Report

International Nuclear Information System (INIS)

Schlahta, Stephan N.

1999-01-01

The purpose of the Tanks Focus Area (TFA) Midyear Review was to improve the quality and responsiveness of TFA technical solutions to identified user needs. This review goal was achieved through executing a multi-phased review approach. The first phase of the midyear review focused on the subset of FY99 work identified by Department of energy users as having continuing benefit in FY00-01. The TFA FY00-02 Technical Responses identified FY99 work that had continued applicability based on the most current set of site user needs. Each TFA FY00-02 Technical Response which included FY work scope was reviewed by the TFA Technical Advisory Group (TAG), in a meeting held in February 1999. Made up of technical experts from across the country, the TAG provides high-quality, short-turnaround, independent technical reviews for the TFA

A Simple Solution for Programming of a Robotic Arm

Directory of Open Access Journals (Sweden)

Bogdan Laurean

2014-12-01

Full Text Available This paper presents a method to actuate, programming and control of a Robotic arm based on a monomobil telescopic planetary gear and a DC motor. Experimental model of robot was designed and manufactured at the Faculty of Engineering from Sibiu, (Patent no. 112418 CI6.B25J 18/02. The DC motor as actuator rotates a reel. The wires on the reel will produce a linear displacement of telescopic modules. The command of the DC motor is realized by a programmable logic controller. The outputs of the programmable logic controller are connected in a "H" bridge. The rotation of the reel in one direction or another has the effect of lengthening or shortening the robotic arm. The value of robotic arm length is monitored by an optical incremental encoder. The value of displacement will correspond to number of steps from an up/down counter.

Sklízecí ústrojí sklízecí mlátičky pro sklizeň obilovin

OpenAIRE

Friedl, Pavel

2014-01-01

In the bachelor thesis, the issues of organ harvesting combines for harvesting cereals, their distribution and inclusion in workflows harvest. The thesis deals with the various functional parts of harvesting system, is briefly described theories reel supplemented track structure finger reel adapters New Holland. The next section the an overview of selected producers of harvesting system, their advantages and disadvantages. In the last section is a tabular overview of selected parameters descr...

Direct band gap measurement of Cu(In,Ga)(Se,S)2 thin films using high-resolution reflection electron energy loss spectroscopy

International Nuclear Information System (INIS)

Heo, Sung; Lee, Hyung-Ik; Park, Jong-Bong; Ko, Dong-Su; Chung, JaeGwan; Kim, KiHong; Kim, Seong Heon; Yun, Dong-Jin; Ham, YongNam; Park, Gyeong Su; Song, Taewon; Lee, Dongho; Nam, Junggyu; Kang, Hee Jae; Choi, Pyung-Ho; Choi, Byoung-Deog

2015-01-01

To investigate the band gap profile of Cu(In 1−x ,Ga x )(Se 1−y S y ) 2 of various compositions, we measured the band gap profile directly as a function of in-depth using high-resolution reflection energy loss spectroscopy (HR-REELS), which was compared with the band gap profile calculated based on the auger depth profile. The band gap profile is a double-graded band gap as a function of in-depth. The calculated band gap obtained from the auger depth profile seems to be larger than that by HR-REELS. Calculated band gaps are to measure the average band gap of the spatially different varying compositions with respect to considering its void fraction. But, the results obtained using HR-REELS are to be affected by the low band gap (i.e., out of void) rather than large one (i.e., near void). Our findings suggest an analytical method to directly determine the band gap profile as function of in-depth

Simulation of neuro-fuzzy model for optimization of combine header setting

Directory of Open Access Journals (Sweden)

S Zareei

2016-09-01

Full Text Available Introduction The noticeable proportion of producing wheat losses occur during production and consumption steps and the loss due to harvesting with combine harvester is regarded as one of the main factors. A grain combines harvester consists of different sets of equipment and one of the most important parts is the header which comprises more than 50% of the entire harvesting losses. Some researchers have presented regression equation to estimate grain loss of combine harvester. The results of their study indicated that grain moisture content, reel index, cutter bar speed, service life of cutter bar, tine spacing, tine clearance over cutter bar, stem length were the major parameters affecting the losses. On the other hand, there are several researchswhich have used the variety of artificial intelligence methods in the different aspects of combine harvester. In neuro-fuzzy control systems, membership functions and if-then rules were defined through neural networks. Sugeno- type fuzzy inference model was applied to generate fuzzy rules from a given input-output data set due to its less time-consuming and mathematically tractable defuzzification operation for sample data-based fuzzy modeling. In this study, neuro-fuzzy model was applied to develop forecasting models which can predict the combine header loss for each set of the header parameter adjustments related to site-specific information and therefore can minimize the header loss. Materials and Methods The field experiment was conducted during the harvesting season of 2011 at the research station of the Faulty of Agriculture, Shiraz University, Shiraz, Iran. The wheat field (CV. Shiraz was harvested with a Claas Lexion-510 combine harvester. The factors which were selected as main factors influenced the header performance were three levels of reel index (RI (forward speed of combine harvester divided by peripheral speed of reel (1, 1.2, 1.5, three levels of cutting height (CH(25, 30, 35 cm, three

Conceptual design of a chickpea harvesting header

Directory of Open Access Journals (Sweden)

H. Golpira

2013-07-01

Full Text Available Interest in the development of stripper headers is growing owing to the excessive losses of combine harvesters and costs of manually harvesting for chickpeas. The design of a new concept can enhance the mechanized process for chickpea harvesting. A modified stripper platform was designed, in which passive fingers with V-shape slots removes the pods from the anchored plant. The floating platform was accompanied by a reel to complete the harvesting header. Black-box modeling was used to redesign the functional operators of the header followed by an investigation of the system behavior. Physical models of the platform and reel were modified to determine the crucial variables of the header arrangement during field trials. The slot width was fixed at 40 mm, finger length at 40 mm, keyhole diameter at 10 mm and entrance width at 6 mm; the batted reel at peripheral diameter of 700 mm and speed at 50 rpm. A tractor-mounted experimental harvester was built to evaluate the work quality of the stripper header. The performance of the prototype was tested with respect to losses and results confirmed the efficiency of the modified stripper header for chickpea harvesting. Furthermore, the header with a 1.4 m working width produced the spot work rates of 0.42 ha h-1.

Global warming and coral reefs

Digital Repository Service at National Institute of Oceanography (India)

Wafar, M.V.M.

, notably at Ratnagiri. Malwan. Redi Port and Vizhingam. Relic reefs with living herm<:ltypic corals at depths ranging fror:l 25 to 45m are the Gaves hani Bank off~\\angalore,and the submerged banks (Bass<:ls de Pedro. Sesostris Bank and Cora Divh... the snore (Qaslm and Wafar, 1979). The other representative Sea le\\lel Variation 417 of the extensive reelS of the outer shelf that survived Pleistocene drowning is the Gaveshani Bank, fanhc: south (J 3° 24' N; 73° 45' E), about 100 km off \\1 ar:ga lore...

IBM 3480 tape cartridge

CERN Multimedia

1984-01-01

The 3480 tape format is a magnetic tape data storage format developed by IBM. The cartridge contains a single reel. IBM’s 3480 cartridge tape system sought to replace the traditional reels of magnetic tape in the computer center. Because of their speed, reliability, durability and low media cost, these tapes and tape drives are still in high demand. A hallmark of the genre is transferability. Tapes recorded with one tape drive are generally readable on another drive, even if the tape drives were built by different manufacturers.

Direct band gap measurement of Cu(In,Ga)(Se,S){sub 2} thin films using high-resolution reflection electron energy loss spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Heo, Sung [Analytical Engineering Group, Samsung Advanced Institute of Technology, 130 Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do 443-803 (Korea, Republic of); College of Information and Communication Engineering, Sungkyunkwan University, Cheoncheon-dong 300, Jangan-gu, Suwon 440-746 (Korea, Republic of); Lee, Hyung-Ik; Park, Jong-Bong; Ko, Dong-Su; Chung, JaeGwan; Kim, KiHong; Kim, Seong Heon; Yun, Dong-Jin; Ham, YongNam; Park, Gyeong Su [Analytical Engineering Group, Samsung Advanced Institute of Technology, 130 Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do 443-803 (Korea, Republic of); Song, Taewon [Energy lab, Samsung Advanced Institute of Technology, 130 Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do 443-803 (Korea, Republic of); Lee, Dongho, E-mail: dhlee0333@gmail.com; Nam, Junggyu [PV Development Team, Energy Solution Business Division, Samsung SDI, 467 Beonyeong-ro, Cheonan-si, Chungcheongnam-do 331-330 (Korea, Republic of); Kang, Hee Jae [Department of Physics, Chungbuk National University, Gaesin-dong, Heungdeok-gu, Cheongju, 361-763 (Korea, Republic of); Choi, Pyung-Ho; Choi, Byoung-Deog, E-mail: bdchoi@skku.edu [College of Information and Communication Engineering, Sungkyunkwan University, Cheoncheon-dong 300, Jangan-gu, Suwon 440-746 (Korea, Republic of)

2015-06-29

To investigate the band gap profile of Cu(In{sub 1−x},Ga{sub x})(Se{sub 1−y}S{sub y}){sub 2} of various compositions, we measured the band gap profile directly as a function of in-depth using high-resolution reflection energy loss spectroscopy (HR-REELS), which was compared with the band gap profile calculated based on the auger depth profile. The band gap profile is a double-graded band gap as a function of in-depth. The calculated band gap obtained from the auger depth profile seems to be larger than that by HR-REELS. Calculated band gaps are to measure the average band gap of the spatially different varying compositions with respect to considering its void fraction. But, the results obtained using HR-REELS are to be affected by the low band gap (i.e., out of void) rather than large one (i.e., near void). Our findings suggest an analytical method to directly determine the band gap profile as function of in-depth.

Enhanced flux pinning by BaZrO3 and (Gd,y)2O3 nano-structures in metal organic chemical vapor deposited GdYBCO high temperature superconductor tapes

Energy Technology Data Exchange (ETDEWEB)

Chen, Y [SuperPower Incorporated, Schenectady, New York; Selvamanickam, V. [SuperPower Incorporated, Schenectady, New York; Paranthaman, Mariappan Parans [ORNL; Cantoni, Claudia [ORNL; Aytug, Tolga [ORNL; Goyal, Amit [ORNL; Lee, Dominic F [ORNL; Specht, Eliot D [ORNL; Zuev, Yuri L [ORNL; Zhang, Yifei [ORNL

2009-01-01

We have formed BaZrO3 nano-columns and (Gd,Y)2O3 nano-precipitates in reel-to-reel MOCVD processed (Gd,Y)Ba2Cu3O7-x coated conductors and increased the critical currents (Ic) of the conductors in applied magnetic fields to remarkable levels. A (Gd,Y)Ba2Cu3O7-x tape of 1m length with 6.5% Zr-additions and 30% composition rich in both Gd and Y showed Ic values of 813 A/cm-width at (self-field, 77K) and above 186 A/cm-width at (1T, 77K). The strongly enhanced flux pinning over a wide range of magnetic field orientations can be attributed to the bidirectionally aligned defect structures of BaZrO3 and (Gd,Y)2O3 created by optimized MOCVD conditions.

Cultivating Political Powerhouses: TFA Corps Members Experiences That Shape Local Political Engagement

Science.gov (United States)

Jacobsen, Rebecca; White, Rachel; Reckhow, Sarah

2016-01-01

In recent years, Teach for America (TFA) has invested in developing corps members as leaders. Although TFA asks corps members for a two-year commitment, TFA celebrates the achievements of alumni who have gone on to careers in politics, public policy, and advocacy. Thus, many community leaders see the arrival of TFA corps members as having a…

Murdered physicist leaves Iran reeling

Science.gov (United States)

Dacey, James

2010-02-01

The murder of the Iranian physicist Masoud Alimohammadi last month has left the country's academic community in a state of shock. Alimohammadi, a 50-year-old physics professor at the University of Tehran, was killed on 12 January by a remote-controlled bomb attached to the side of a motorcycle outside his home. The bomb was detonated as he left for work, but the reason for the murder remained unclear as Physics World went to press. Reports by the Iranian state media blamed the US and Israel for the attack - a claim that the US later described as "absurd".

Operation and experience of a 2 km coated conductor REEL – to – REEL copper pulse plating facility

International Nuclear Information System (INIS)

Floegel-Delor, U; Riedel, T; Wippich, D; Rothfeld, R; Schirrmeister, P; Koenig, R; Werfel, F N; Usoskin, A; Rutt, A

2014-01-01

Bruker HTS manufactures YBCO based superconducting wires of the second generation on low- cost Stainless Steel substrate (100 μm thick). With 250 – 500 A/cm@77 K, SF, 650 MPa tensile strength and 6 mm bending radius excellent electrical and mechanical properties are achieved. As complementation of the 2G fabrication technology an automated 2 km copper pulse plating facility has been installed in 2012. We report here the operation requirements and the experiences of the copper plating technique.

Deposition studies and coordinated characterization of MOCVD YBCO films on IBAD-MgO templates

International Nuclear Information System (INIS)

Aytug, T; Paranthaman, M; Heatherly, L; Zuev, Y; Zhang, Y; Kim, K; Goyal, A; Maroni, V A; Chen, Y; Selvamanickam, V

2009-01-01

A recently installed research-scale metal-organic chemical vapor deposition (MOCVD) system at Oak Ridge National Laboratory, provided by SuperPower, Inc., has been used to investigate processing variables for MOCVD YBCO precursors and trends in the resulting properties. Systematic studies of YBCO film growth on LaMnO 3 /IBAD-MgO templates were carried out by optimizing deposition temperature and oxygen flow rate. Microstructural and superconducting properties of the YBCO films were analyzed by x-ray diffraction, scanning electron microscopy and transport measurements. The identification of intermediate phases formed during the YBCO precursor transformation was investigated by coordinated reel-to-reel Raman microprobe analysis. With this combination of various characterization techniques, an improved understanding of the growth characteristics of MOCVD YBCO films was established. Finally, critical current densities greater than 2 MA cm -2 for film thicknesses of 0.8 μm were demonstrated.

Deposition studies and coordinated characterization of MOCVD YBCO films on IBAD-MgO templates

Energy Technology Data Exchange (ETDEWEB)

Aytug, T; Paranthaman, M [Oak Ridge National Laboratory, Chemical Sciences Division, Oak Ridge, TN 37831 (United States); Heatherly, L; Zuev, Y; Zhang, Y; Kim, K; Goyal, A [Oak Ridge National Laboratory, Materials Science and Technology Division, Oak Ridge, TN 37831 (United States); Maroni, V A [Argonne National Laboratory, Chemical Sciences and Engineering Division, Argonne, IL 60439 (United States); Chen, Y; Selvamanickam, V [SuperPower, Incorporated, 450 Duane Avenue, Schenectady, NY 12304 (United States)], E-mail: aytugt@ornl.gov

2009-01-15

A recently installed research-scale metal-organic chemical vapor deposition (MOCVD) system at Oak Ridge National Laboratory, provided by SuperPower, Inc., has been used to investigate processing variables for MOCVD YBCO precursors and trends in the resulting properties. Systematic studies of YBCO film growth on LaMnO{sub 3}/IBAD-MgO templates were carried out by optimizing deposition temperature and oxygen flow rate. Microstructural and superconducting properties of the YBCO films were analyzed by x-ray diffraction, scanning electron microscopy and transport measurements. The identification of intermediate phases formed during the YBCO precursor transformation was investigated by coordinated reel-to-reel Raman microprobe analysis. With this combination of various characterization techniques, an improved understanding of the growth characteristics of MOCVD YBCO films was established. Finally, critical current densities greater than 2 MA cm{sup -2} for film thicknesses of 0.8 {mu}m were demonstrated.

Feed-Forward Control of Kite Power Systems

International Nuclear Information System (INIS)

Fechner, Uwe; Schmehl, Roland

2014-01-01

Kite power technology is a novel solution to harvest wind energy from altitudes that can not be reached by conventional wind turbines. The use of a lightweight but strong tether in place of an expensive tower provides an additional cost advantage, next to the higher capacity factor. This paper describes a method to estimate the wind velocity at the kite using measurement data at the kite and at the ground. Focussing on a kite power system, which is converting the traction power of a kite in a pumping mode of operation, a reel-out speed predictor is presented for use in feed-forward control of the tether reel-out speed of the winch. The results show, that the developed feedforward controller improves the force control accuracy by a factor of two compared to the previously used feedback controller. This allows to use a higher set force during the reel-out phase which in turn increases the average power output by more than 4%. Due to its straightforward implementation and low computational requirements feedforward control is considered a promising technique for the reliable and efficient operation of traction-based kite power systems

One kilometer (1 km) electric solar wind sail tether produced automatically.

Science.gov (United States)

Seppänen, Henri; Rauhala, Timo; Kiprich, Sergiy; Ukkonen, Jukka; Simonsson, Martin; Kurppa, Risto; Janhunen, Pekka; Hæggström, Edward

2013-09-01

We produced a 1 km continuous piece of multifilament electric solar wind sail tether of μm-diameter aluminum wires using a custom made automatic tether factory. The tether comprising 90,704 bonds between 25 and 50 μm diameter wires is reeled onto a metal reel. The total mass of 1 km tether is 10 g. We reached a production rate of 70 m/24 h and a quality level of 1‰ loose bonds and 2‰ rebonded ones. We thus demonstrated that production of long electric solar wind sail tethers is possible and practical.

Fabrication of long REBCO coated conductors by PLD process in China

Energy Technology Data Exchange (ETDEWEB)

Li, Yijie, E-mail: yjli@sjtu.edu.cn [Key Laboratory of Artificial Structure and Quantum Control, Ministry of Education, Department of Physics and Astronomy, Shanghai Jiao Tong University, 800 Dong Chuan Road, Shanghai 20040 (China); Shanghai Superconductor Technology Corporation, Ltd, 28 Jiang Chuan Road, Shanghai 200240 (China); Liu, Linfei; Wu, Xiang [Key Laboratory of Artificial Structure and Quantum Control, Ministry of Education, Department of Physics and Astronomy, Shanghai Jiao Tong University, 800 Dong Chuan Road, Shanghai 20040 (China)

2015-11-15

Highlights: • SJTU fabricated 100 m long class CC tapes with over 300 A/cm on RABiTS tapes in 2011. • 100 m long CC tapes with 500 A/cm have been routinely fabricated on IBAD-MgO tapes. • The process optimization for kilometer long coated conductor tapes is underway. - Abstract: In China, the First National Key Project on CC Program started in 2009, which was focused on developing hundred meter long class CC tapes based on PLD/RABiTS processes. In this project, SJTU mainly worked on all of functional layer deposition process development. Northwest Institute for Non-ferrous Metal Research worked on RABiTS tape fabrication. At the end of the project in 2011, SJTU successfully fabricated hundred meter long CC tapes with over 300 A/cm (at 77 K, self field) on RABiTS tapes. To develop high performance CC tapes by PLD/IBAD-MgO processes, a pilot CC fabrication line was set up at Shanghai Superconductor Technology Corporation, Ltd. in 2013. High quality long REBCO coated conductors have been successfully fabricated on flexible polycrystalline metal tapes by PLD plus magnetron sputter and IBAD processes. Under optimized conditions, the IBAD-MgO layers showed pure (0 0 1) orientation and excellent in-plane texture. The in-plane phi-scan rocking curve is 4–6 degrees. AFM observation showed MgO layer had very smooth surface. The RMS is less 1 nm. On the textured MgO layer, sputter deposited single cerium oxide cap-layer showed pure (0 0 1) orientation and excellent in-plane texture of 4–6 degree. Reel-to-reel PLD process with high deposition rate was already scaled up to 100 m/h tape speed. Hundred meters long coated conductor tapes with over 500 A/cm performance have been routinely fabricated. And now, the process optimization for kilometer long coated conductor tapes is underway.

L130-million cut to grants hits UK physical scientists

CERN Multimedia

Cressey, Daniel

2008-01-01

"UK physicists, still reeling from massive funding cuts announced earlier this year, have learnt of worse to come. Roughly L130 million (US$260 million)is being slashed from research grants awarded by the Engineering and Physical Scienes Research Council (EPSRC), it announced on 17 March." (2 pages)

Strategier for integreret sundhedsfremme - et review

DEFF Research Database (Denmark)

Lau, Charlotte Bech; Holm, Jesper; Andersen, John

over for ulighed i sundhed efter disse erfaringer og koncepter. Bogen omhandler derved, hvilke processer, tilgange og strategier der har betydning for, at kommunal sundhedsfremme i praksis kan være en reel fælles opgave mellem borgere, professionelle, kommunale og civile aktører. Vi har heri valgt...

Faceting of (001) CeO2 Films: The Road to High Quality TFA-YBa2Cu3O7 Multilayers

International Nuclear Information System (INIS)

Coll, M; Gazquez, J; Sandiumenge, F; Pomar, A; Puig, T; Obradors, X; Espinos, J P; Gonzalez-Elipe, A R

2006-01-01

CeO 2 films are technologically important as a buffer layer for the integration of superconducting YBa 2 Cu 3 O 7 films on biaxially textured Ni substrates. The growth of YBa 2 Cu 3 O 7 layers on the CeO 2 cap layers by the trifluoroacetate (TFA) route remains a critical issue. To improve the accommodation of YBa 2 Cu 3 O 7 on CeO 2 , surface conditioning or CeO 2 is required. In this work we have applied ex-situ post-processes at different atmospheres to the CeO 2 layers deposited on YSZ single crystals using rf sputtering. XPS analysis showed that post-annealing CeO 2 layer in Ar/H 2 /H 2 O catalyses in an unexpected way the growth of (001)- terraces. We also report on the growth conditions of YBa 2 Cu 3 O 7 -TFA on CeO 2 buffered YSZ single crystal grown by chemical solution deposition and we compare them with those leading to optimized YBa 2 Cu 3 O 7 -TFA films on LaAlO 3 single crystals. Critical currents up to 1.6 MA/cm 2 at 77 K have been demonstrated in 300 nm thick YBa 2 Cu 3 O 7 layers on CeO 2 /YSZ system. The optimized processing conditions have then been applied to grow YBa 2 Cu 3 O 7 -TFA films on Ni substrates having vacuum deposited cap layers of CeO 2

VERGİ GELİRLERİ VE KAMU HARCAMALARI AÇISINDAN ENFLASYON: TANZİ VE TERS TANZİ ETKİLERİ

OpenAIRE

ÇAVUŞOĞLU, A. Tarkan

2005-01-01

Bu çalışma, Tanzi etkisi olarak adlandırılan enflasyonun reel vergi gelirleri üzerindeki etkisi ile ters Tanzi etkisi olarak adlandırılan enflasyonun reel kamu harcamaları üzerindeki etkisini konu etmektedir. Çalışmada, enflasyonun bütçe dengesi üzerindeki etkisi, Tanzi ve ters Tanzi etkileri kapsamında ekonometrik bir yaklaşımla incelenmeye çalışılmıştır. Elde edilen ampirik bulgular, 1987-2003 döneminde Türkiye ekonomisinde yaşanan yüksek enflasyonun, hem vergi gelirlerinin hem de kamu har...

Photovoltaic Power System and Power Distribution Demonstration for the Desert RATS Program

Science.gov (United States)

Colozza, Anthony; Jakupca, Ian; Mintz, Toby; Herlacher, Mike; Hussey, Sam

2012-01-01

A stand alone, mobile photovoltaic power system along with a cable deployment system was designed and constructed to take part in the Desert Research And Technology Studies (RATS) lunar surface human interaction evaluation program at Cinder Lake, Arizona. The power system consisted of a photovoltaic array/battery system. It is capable of providing 1 kW of electrical power. The system outputs were 48 V DC, 110 V AC, and 220 V AC. A cable reel with 200 m of power cable was used to provide power from the trailer to a remote location. The cable reel was installed on a small trailer. The reel was powered to provide low to no tension deployment of the cable. The cable was connected to the 220 V AC output of the power system trailer. The power was then converted back to 110 V AC on the cable deployment trailer for use at the remote site. The Scout lunar rover demonstration vehicle was used to tow the cable trailer and deploy the power cable. This deployment was performed under a number of operational scenarios, manned operation, remote operation and tele-robotically. Once deployed, the cable was used to provide power, from the power system trailer, to run various operational tasks at the remote location.

Gender inequality and entrepreneurship: the Indian silk industry.

Science.gov (United States)

Mayoux, L

1993-12-01

The production of raw silk yarns from cocoons (reeling) is a crucial middle stage in the silk industry. The author reviews the experience of attempts to encourage women's entrepreneurship in this industry in Karnataka, South India. Reeling is a potentially lucrative field with possibilities for upward mobility from small-scale to large-scale production if credit is readily available. The industry in India employs large numbers of skilled female workers from all communities and is one of few in which a sectoral gender policy is being implemented. While these factors may be thought to be conducive to the development of women entrepreneurs, none were in the areas studied at the time of research. No women were involved in marketing through the official marketing system and no women's co-operatives were operating. While women were listed among registered reelers, men controlled the businesses. Men simply used women to obtain supplementary bank loans or funds through other avenues otherwise open to only women. Policies for women in reeling have therefore proved to be overwhelmingly unsuccessful. The author considers gender inequality and gender policy at length in this context and concludes that the problem is systemic and structural in nature. Policy implications are considered.

Electronic and Optical Properties of Aluminum Oxide Before and After Surface Reduction by Ar+ Bombardment

Directory of Open Access Journals (Sweden)

D. Tahir

2014-08-01

Full Text Available The electronic and optical properties of a-Al2O3 after induced by 3-keV Ar+ sputtering have been studied quantitatively by use of reflection electron energy loss spectroscopy (REELS spectra. The band gap values of a-Al2O3 was determined from the onset values of the energy loss spectrum to the background level of REELS spectra as a function of time Ar+ bombardment. The bandgap changes from 8.4 eV before sputtering to 6.2 eV after 4 minutes of sputtering.The optical properties of α-Al2O3 thin films have been determined by comparing the experimental cross section obtained from reflection electron energy loss spectroscopy with the theoretical inelastic scattering cross section, deduced from the simulated energy loss function (ELF by using QUEELS-ε(k-REELS software. The peak assignments are based on ELF and compared with reported data on the electronic structure of α-Al2O3 obtained using different techniques. The results demonstrate that the electronic and optical properties before and after surface reduction will provide further understanding in the fundamental properties of α-Al2O3 which will be useful in the design, modeling and analysis of devices applications performance.

MINIMIZING THE PREPARATION TIME OF A TUBES MACHINE: EXACT SOLUTION AND HEURISTICS

Directory of Open Access Journals (Sweden)

Robinson S.V. Hoto

Full Text Available ABSTRACT In this paper we optimize the preparation time of a tubes machine. Tubes are hard tubes made by gluing strips of paper that are packed in paper reels, and some of them may be reused between the production of one and another tube. We present a mathematical model for the minimization of changing reels and movements and also implementations for the heuristics Nearest Neighbor, an improvement of a nearest neighbor (Best Nearest Neighbor, refinements of the Best Nearest Neighbor heuristic and a heuristic of permutation called Best Configuration using the IDE (integrated development environment WxDev C++. The results obtained by simulations improve the one used by the company.

Long length coated conductor fabrication by inclined substrate deposition and evaporation

Energy Technology Data Exchange (ETDEWEB)

Prusseit, W [THEVA Duennschichttechnik GmbH, Rote-Kreuz-Str. 8, 85737 Ismaning (Germany); Hoffmann, C [THEVA Duennschichttechnik GmbH, Rote-Kreuz-Str. 8, 85737 Ismaning (Germany); Nemetschek, R [THEVA Duennschichttechnik GmbH, Rote-Kreuz-Str. 8, 85737 Ismaning (Germany); Sigl, G [THEVA Duennschichttechnik GmbH, Rote-Kreuz-Str. 8, 85737 Ismaning (Germany); Handke, J [THEVA Duennschichttechnik GmbH, Rote-Kreuz-Str. 8, 85737 Ismaning (Germany); Luemkemann, A [Technical University Munich, James- Franck-Str. 1, 85748 Garching (Germany); Kinder, H [Technical University Munich, James- Franck-Str. 1, 85748 Garching (Germany)

2006-06-01

The commercial development of coated conductors is rapidly progressing. As a result we present an economic route to produce second generation HTS tape from the initial substrate preparation to the final metal coating. The most important and technically challenging steps are the deposition of an oriented buffer layer and the superconductor film in a reel-to-reel configuration. New evaporation techniques have been developed to enable reliable, high rate tape coating. Highly oriented MgO - buffer layers are realized by inclined substrate deposition (ISD) and DyBCO is deposited by simple e-gun evaporation yielding critical currents beyond 200 A/cm. Coated conductors have been fabricated up to 40 m length and are currently tested in a variety of applications.

Policy Responses to the Recent Poor Performance of the U.S. Labor Market

Science.gov (United States)

Haveman, Robert; Heinrich, Carolyn; Smeeding, Timothy

2012-01-01

Since the onset of the Great Recession, the U.S. labor market has been reeling. Public concern has largely focused on the unemployment rate, which rose to double digits and has since been stalled at just over 9 percent. This rate is unacceptably high, and macroeconomic policy efforts have been unsuccessful in bringing it down. The overall…

Eesti film metsaneenetsist sai Šveitsis auhinna

Index Scriptorium Estoniae

2003-01-01

Sotsiaalantropoloogi ja etnoloogi Liivo Niglase dokumentaalfilm neenetsi kirjanikust, kes naasnud põhjapõdrakasvatuse juurde - "Jüri Vella maailm" - sai Šveitsi filmifestivalil "Visions du Reel" Maailma Loduskaitse Liidu auhinna

Direct characterization of the energy level alignments and molecular components in an organic hetero-junction by integrated photoemission spectroscopy and reflection electron energy loss spectroscopy analysis.

Science.gov (United States)

Yun, Dong-Jin; Shin, Weon-Ho; Bulliard, Xavier; Park, Jong Hwan; Kim, Seyun; Chung, Jae Gwan; Kim, Yongsu; Heo, Sung; Kim, Seong Heon

2016-08-26

A novel, direct method for the characterization of the energy level alignments at bulk-heterojunction (BHJ)/electrode interfaces on the basis of electronic spectroscopy measurements is proposed. The home-made in situ photoemission system is used to perform x-ray/ultraviolet photoemission spectroscopy (XPS/UPS), reflection electron energy loss spectroscopy (REELS) and inverse photoemission spectroscopy of organic-semiconductors (OSCs) deposited onto a Au substrate. Through this analysis system, we are able to obtain the electronic structures of a boron subphthalocyanine chloride:fullerene (SubPC:C60) BHJ and those of the separate OSC/electrode structures (SubPC/Au and C60/Au). Morphology and chemical composition analyses confirm that the original SubPC and C60 electronic structures remain unchanged in the electrodes prepared. Using this technique, we ascertain that the position and area of the nearest peak to the Fermi energy (EF = 0 eV) in the UPS (REELS) spectra of SubPC:C60 BHJ provide information on the highest occupied molecular orbital level (optical band gap) and combination ratio of the materials, respectively. Thus, extracting the adjusted spectrum from the corresponding SubPC:C60 BHJ UPS (REELS) spectrum reveals its electronic structure, equivalent to that of the C60 materials. This novel analytical approach allows complete energy-level determination for each combination ratio by separating its electronic structure information from the BHJ spectrum.

32 CFR 327.5 - Systems of records.

Science.gov (United States)

2010-07-01

... are not limited to, freedom of religion, freedom of political beliefs, freedom of speech, freedom of.... Other media storing personal data such as tapes, reels, disk packs, etc., must be marked with labels...

Digitisation of the CERN Audio Archives

CERN Multimedia

Maximilien Brice

2006-01-01

Since the creation of CERN in 1954 until mid 1980s, the audiovisual service has recorded hundreds of hours of moments of life at CERN on audio tapes. These moments range from inaugurations of new facilities to VIP speeches and general interest cultural seminars The preservation process started in June 2005 On these pictures, we see Waltraud Hug working on an open-reel tape.

Progress in scale-up of second-generation HTS conductor

International Nuclear Information System (INIS)

Selvamanickam, V.; Chen, Y.; Xiong, X.; Xie, Y.; Zhang, X.; Qiao, Y.; Reeves, J.; Rar, A.; Schmidt, R.; Lenseth, K.

2007-01-01

Tremendous progress has been recently made in the achievement of high-performance, high-speed, long-length second-generation (2G) HTS conductors. Using ion beam assisted deposition (IBAD) MgO and metal organic chemical vapor deposition (MOCVD), SuperPower has scaled up tape lengths to 427 m with a minimum critical current value of 191 A/cm corresponding to a critical current x length performance of 81,550 m. Tape speeds up to 120 m/h have been reached with IBAD MgO, up to 80 m/h with buffer deposition and up to 45 m/h with MOCVD, all in single pass processing of 12 mm wide tape. Critical current value of 227 A/cm has been achieved in a 203 m long tape produced in an all-high-speed fabrication process. Critical current values have been raised to 721 A/cm, 592 A/cm and 486 A/cm in short, reel-to-reel processed tape, over 1 m length and over 11.1 m, respectively, using thicker MOCVD HTS films. Finally, over 10,000 m of copper-stabilized, 4 mm wide conductor has been produced and tested for delivery to the Albany Cable project. The average critical current of the 10,000 m lot was 81 A

Progress in scale-up of second-generation HTS conductor

Energy Technology Data Exchange (ETDEWEB)

Selvamanickam, V. [SuperPower Inc., 450 Duane Avenue, Schenectady, NY 12304 (United States)], E-mail: vselva@igc.com; Chen, Y.; Xiong, X.; Xie, Y.; Zhang, X.; Qiao, Y.; Reeves, J.; Rar, A.; Schmidt, R.; Lenseth, K. [SuperPower Inc., 450 Duane Avenue, Schenectady, NY 12304 (United States)

2007-10-01

Tremendous progress has been recently made in the achievement of high-performance, high-speed, long-length second-generation (2G) HTS conductors. Using ion beam assisted deposition (IBAD) MgO and metal organic chemical vapor deposition (MOCVD), SuperPower has scaled up tape lengths to 427 m with a minimum critical current value of 191 A/cm corresponding to a critical current x length performance of 81,550 m. Tape speeds up to 120 m/h have been reached with IBAD MgO, up to 80 m/h with buffer deposition and up to 45 m/h with MOCVD, all in single pass processing of 12 mm wide tape. Critical current value of 227 A/cm has been achieved in a 203 m long tape produced in an all-high-speed fabrication process. Critical current values have been raised to 721 A/cm, 592 A/cm and 486 A/cm in short, reel-to-reel processed tape, over 1 m length and over 11.1 m, respectively, using thicker MOCVD HTS films. Finally, over 10,000 m of copper-stabilized, 4 mm wide conductor has been produced and tested for delivery to the Albany Cable project. The average critical current of the 10,000 m lot was 81 A.

OL Copenhagen 2020: Strategisk utopi?

DEFF Research Database (Denmark)

Østergaard, Katrine; Møller Christensen, Søren

2006-01-01

Ny rapport anbefaler, at København ansøger om værtskabet for sommer-OL i 2020. Kulturminister Brian Mikkelsen vil tidligst tage stilling til en reel ansøgning om tre år. Der er da også god grund til at tænke sig rigtig godt om, før man engagerer sig med verdens største event......Ny rapport anbefaler, at København ansøger om værtskabet for sommer-OL i 2020. Kulturminister Brian Mikkelsen vil tidligst tage stilling til en reel ansøgning om tre år. Der er da også god grund til at tænke sig rigtig godt om, før man engagerer sig med verdens største event...

Dokfilm "Elav jõud" osaleb kahel mainekal festivalil

Index Scriptorium Estoniae

2004-01-01

Andres Maimiku ja Jaak Kilmi dokumentaalfilmi "Elav jõud" on valitud Nyoni (Šveits) festivalile "Visions du Reel" ja Wiesbadenis toimuvale festivalile "goEast - Festival of Central and Eastern European Film"

Fabrication of 100 A class, 1 m long coated conductor tapes by metal organic chemical vapor deposition and pulsed laser deposition

Energy Technology Data Exchange (ETDEWEB)

Selvamanickam, V.; Lee, H.G.; Li, Y.; Xiong, X.; Qiao, Y.; Reeves, J.; Xie, Y.; Knoll, A.; Lenseth, K

2003-10-15

SuperPower has been scaling up YBa{sub 2}Cu{sub 3}O{sub x}-based second-generation superconducting tapes by techniques such as pulsed laser deposition (PLD) using industrial laser and metal organic chemical vapor deposition (MOCVD). Both techniques offer advantage of high deposition rates, which is important for high throughput. Using highly-polished substrates produced in a reel-to-reel polishing facility and buffer layers deposited in a pilot ion beam assisted deposition facility, meter-long second-generation high temperature superconductor tapes have been produced. 100 A class, meter-long coated conductor tapes have been reproducibly demonstrated in this work by both MOCVD and PLD. The best results to date are 148 A over 1.06 m by MOCVD and 135 A over 1.1 m by PLD using industrial laser.

Osteochondrodysplasias

Science.gov (United States)

... HealthDay Live Fish at School May Reel in Future Scientists: Study ... and the Merck Manuals Merck & Co., Inc., Kenilworth, NJ, USA is a global healthcare leader working to help the world be well. From ...

Disorders of Amino Acid Metabolism

Science.gov (United States)

... HealthDay Live Fish at School May Reel in Future Scientists: Study ... and the Merck Manuals Merck & Co., Inc., Kenilworth, NJ, USA is a global healthcare leader working to help the world be well. From ...

Osteopetroses

Science.gov (United States)

... HealthDay Live Fish at School May Reel in Future Scientists: Study ... and the Merck Manuals Merck & Co., Inc., Kenilworth, NJ, USA is a global healthcare leader working to help the world be well. From ...

Bacterial Tracheitis

Science.gov (United States)

... HealthDay Live Fish at School May Reel in Future Scientists: Study ... and the Merck Manuals Merck & Co., Inc., Kenilworth, NJ, USA is a global healthcare leader working to help the world be well. From ...

Marine Corps Semper Fit Program Manual

Science.gov (United States)

1999-11-08

issue, badminton , basketball, boxing, calisthenics, cardiovascular training, gymnastics, handball, jogging, martial arts, physical fitness training...cooler Hunting & Fishing Equipment - bow & arrows - quiver - rifle - shotgun - rod & reel - tacklebox - creel Sports Equipment - badminton set

Manufacturing Technology (MATES) II. Task Order 0006: Air Force Technology and Industrial Base Research Sub-Task 07: Future Advances in Electronic Materials and Processes-Flexible Hybrid Electronics

Science.gov (United States)

2016-02-29

of Michigan has tuned the optical capabilities of graphene for future military applications to create infrared ( IR ) contact lenses. In a paper ...combination of liquid ink and rubber printed in channels that allowed the ink to dry in place on the paper . [332] Various types of previously...printing on to a web (reel/roll) of paper is commonly used for high speed printing of newspapers and magazines. Often called offset printing, offset

X-Ray imager power source on distribution trailers

International Nuclear Information System (INIS)

Johns, B.R.

1996-01-01

This Acceptance for Beneficial Use documents the work completed on the addition of an X-ray cable reel on distribution trailer HO-64-3533 for core sampling equipment. Work and documentation remaining to be completed is identified

Cloud-based uniform ChIP-Seq processing tools for modENCODE and ENCODE.

Science.gov (United States)

Trinh, Quang M; Jen, Fei-Yang Arthur; Zhou, Ziru; Chu, Kar Ming; Perry, Marc D; Kephart, Ellen T; Contrino, Sergio; Ruzanov, Peter; Stein, Lincoln D

2013-07-22

Funded by the National Institutes of Health (NIH), the aim of the Model Organism ENCyclopedia of DNA Elements (modENCODE) project is to provide the biological research community with a comprehensive encyclopedia of functional genomic elements for both model organisms C. elegans (worm) and D. melanogaster (fly). With a total size of just under 10 terabytes of data collected and released to the public, one of the challenges faced by researchers is to extract biologically meaningful knowledge from this large data set. While the basic quality control, pre-processing, and analysis of the data has already been performed by members of the modENCODE consortium, many researchers will wish to reinterpret the data set using modifications and enhancements of the original protocols, or combine modENCODE data with other data sets. Unfortunately this can be a time consuming and logistically challenging proposition. In recognition of this challenge, the modENCODE DCC has released uniform computing resources for analyzing modENCODE data on Galaxy (https://github.com/modENCODE-DCC/Galaxy), on the public Amazon Cloud (http://aws.amazon.com), and on the private Bionimbus Cloud for genomic research (http://www.bionimbus.org). In particular, we have released Galaxy workflows for interpreting ChIP-seq data which use the same quality control (QC) and peak calling standards adopted by the modENCODE and ENCODE communities. For convenience of use, we have created Amazon and Bionimbus Cloud machine images containing Galaxy along with all the modENCODE data, software and other dependencies. Using these resources provides a framework for running consistent and reproducible analyses on modENCODE data, ultimately allowing researchers to use more of their time using modENCODE data, and less time moving it around.

Reliability of the MODS assay decentralisation process in three health regions in Peru

Science.gov (United States)

Mendoza, A.; Castillo, E.; Gamarra, N.; Huamán, T.; Perea, M.; Monroi, Y.; Salazar, R.; Coronel, J.; Acurio, M.; Obregón, G.; Roper, M.; Bonilla, C.; Asencios, L.; Moore, D. A. J.

2011-01-01

OBJECTIVE To deliver rapid isoniazid (INH) and rifampicin (RMP) drug susceptibility testing (DST) close to the patient, we designed a decentralisation process for the microscopic observation drug susceptibility (MODS) assay in Peru and evaluated its reliability. METHODS After 2 weeks of training, laboratory staff processed ≥120 consecutive sputum samples each in three regional laboratories. Samples were processed in parallel with MODS testing at an expert laboratory. Blinded paired results were independently analysed by the Instituto Nacional de Salud (INS) according to predetermined criteria: concordance for culture, DST against INH and RMP and diagnosis of multidrug-resistant t uberculosis (MDR-TB) ≥ 95%, McNemar's P > 0.05, kappa index (κ) ≥ 0.75 and contamination 1–4%. Sensitivity and specificity for MDR-TB were calculated. RESULTS The accreditation process for Callao (126 samples, 79.4% smear-positive), Lima Sur (n = 130, 84%) and Arequipa (n = 126, 80%) took respectively 94, 97 and 173 days. Pre-determined criteria in all regional laboratories were above expected values. The sensitivity and specificity for detecting MDR-TB in regional laboratories were >95%, except for sensitivity in Lima Sur, which was 91.7%. Contamination was 1.0–2.3%. Mean delay to positive MODS results was 9.9–12.9 days. CONCLUSION Technology transfer of MODS was reliable, effective and fast, enabling the INS to accredit regional laboratories swiftly. PMID:21219684

Portrait of a "Teach for All" (TFA) Teacher: Media Narratives of the Universal TFA Teacher in 12 Countries

Science.gov (United States)

Gautreaux, Michelle; Delgado, Sandra

2016-01-01

This article employs narrative analysis to examine how the media in 12 different countries characterize the "Teach for All" (TFA) teacher. Examining mass media narratives in these 12 countries illustrates that there are some remarkable commonalities in the narratives and character portraits co-constructed and propagated by the media. At…

End of Life: Suicide Grief

Science.gov (United States)

Healthy Lifestyle End of life A loved one's suicide can be emotionally devastating. Use healthy coping strategies — ... Clinic Staff When a loved one dies by suicide, overwhelming emotions can leave you reeling. Your grief ...

Field mapping measurements to determine spatial and field dependence of critical current density in YBCO tapes

International Nuclear Information System (INIS)

Leclerc, J.; Berger, K.; Douine, B.; Lévêque, J.

2013-01-01

Highlights: • A method for characterizing superconducting tapes from field mapping is presented. • A new and efficient field mapping apparatus has been setup. • This method allows the spatial characterization of superconducting tapes. • The critical current density is obtained as a function of the flux density. • This method has been experimentally tested on an YBCO tape. -- Abstract: In this paper a measurement method that allows the determination of the critical current density of superconducting tape from field mapping measurements is presented. This contact-free method allows obtaining characteristics of the superconductor as a function of the position and of the applied flux density. With some modifications, this technique can be used for reel-to-reel measurements. The determination of the critical current density is based on an inverse calculation. This involves calculating the current distribution in the tape from magnetic measurements. An YBaCuO tape has been characterized at 77 K. A defect in this superconductor has been identified. Various tests were carried out to check the efficiency of the method. The inverse calculation was tested theoretically and experimentally. Comparison with a transport current measurement was also performed

Investigation of Jc-Suppressing Factors in Flat-Rolled Sr0.6K0.4Fe2As2Fe Tapes Via Microstructure Analysis

KAUST Repository

Zhang, Xianping

2015-01-13

Pnictide superconductors will be very promising for applications if wires with high critical current density Jc can allow reel-to-reel large-scale fabrication at low costs. To understand the mechanism(s) that limited Jc in flat-rolled Sr0.6K0.4Fe2As2(Sr122) tapes, microstructure analysis has been considered the most direct and efficient way. Here, we report on high-resolution microstructure imaging and analysis on Fe-sheathed flat-rolled Sr122 tapes, which have a Jc as high as 2.3 × 104 A/cm2 at 10 T and 4.2 K. The overlapping nature of the Sr122 plates was clearly observed. Transmission electron microscopy/scanning transmission electron microscopy analysis showed that, besides the cracks formed during the fabrication process, the SrO2 phase and cavities caused by the inhomogeneously dispersed Sr and K are the other important factors suppressing Jc. The wetting phase FeAs at the grain boundaries can be partially substituted by Sn in Sn-added samples. Our findings provide insights that pave the way to further enhance the critical current of the rolled 122 tapes up to the practical level.

DEMOCRATIZATION IN NIGERIA: NATION – BUILDING VERSUS ...

African Journals Online (AJOL)

leadership, corruption, poverty, unwholesome 'transplanting' of foreign concepts of .... of its citizens and the unwritten rules of honesty, accountability and integrity. These can hardly be ..... Like a vicious circle, this has been reeling out series of.

Method and apparatus for coating thin foil with a boron coating

Science.gov (United States)

Lacy, Jeffrey L.

2018-01-16

An apparatus and a process is disclosed for applying a boron coating to a thin foil. Preferably, the process is a continuous, in-line process for applying a coating to a thin foil comprising wrapping the foil around a rotating and translating mandrel, cleaning the foil with glow discharge in an etching chamber as the mandrel with the foil moves through the chamber, sputtering the foil with boron carbide in a sputtering chamber as the mandrel moves through the sputtering chamber, and unwinding the foil off the mandrel after it has been coated. The apparatus for applying a coating to a thin foil comprises an elongated mandrel. Foil preferably passes from a reel to the mandrel by passing through a seal near the initial portion of an etching chamber. The mandrel has a translation drive system for moving the mandrel forward and a rotational drive system for rotating mandrel as it moves forward. The etching chamber utilizes glow discharge on a surface of the foil as the mandrel moves through said etching chamber. A sputtering chamber, downstream of the etching chamber, applies a thin layer comprising boron onto the surface of the foil as said mandrel moves through said sputtering chamber. Preferably, the coated foil passes from the mandrel to a second reel by passing through a seal near the terminal portion of the sputtering chamber.

Jack Nicholson: A Reel and Real-Life Contribution to Neurosciences.

Science.gov (United States)

Tripathi, Manjul; Purkayastha, Moushumi; Rai, Ashutosh; Mukherjee, Kanchan K

2017-05-01

Though primarily considered entertainment, cinema is a mirror of society. The portrayal of neurosciences is common in cinema, but none could do it better than Jack Nicholson. We give a brief overview of his contribution to neurosciences by analyzing his acting skills. Copyright © 2016 Elsevier Inc. All rights reserved.

Development and application of a green-chemistry solution deposition technique for buffer layer coating on cube-textured metal substrates in view of further deposition of rare-earth based superconductors

DEFF Research Database (Denmark)

Pallewatta, Pallewatta G A P

which consist of YBCO superconducting coatings on cube-textured Ni based alloy tapes.  Before the epitaxial deposition this superconducting layer, a buffer layer is applied on the metal substrate as a diffusion barrier which is also required to transfer the strong texture of the underlying substrate......, allowing the epitaxial growth of the superconducting layer. State-of-the-art coated conductor hetero structures are mainly based on CeO2 based buffer stacks that consist of a sequence of several different buffer layers. Buffer layers deposited by continuous chemical deposition techniques, which...... is expected to be very advantageous in reel-to-reel applications. The thickness of these SrTiO3 monolayers was large enough to stop the nickel and copper diffusion from the Cu/Ni substrate. Hence, the developed high quality buffer layers are expected to be acting as efficient diffusion barriers and also...

Graphene oxide and reduced graphene oxide studied by the XRD, TEM and electron spectroscopy methods

International Nuclear Information System (INIS)

Stobinski, L.; Lesiak, B.; Malolepszy, A.; Mazurkiewicz, M.; Mierzwa, B.; Zemek, J.; Jiricek, P.; Bieloshapka, I.

2014-01-01

Highlights: • Graphene oxide (FL-GOc) and reduced graphene oxide (FL-RGOc): XRD, TEM, XPS, REELS. • FL-GOc: stacking nanostructure—22 × 6 nm (DxH), 0.9 nm layers separation (XRD). • FL-RGOc: stacking nanostructure—8 × 1 nm (DxH), 0.4 nm layers separation (XRD). • Reduction: oxygen group degradation, decreasing distance between graphene layers. • Number of graphene layers in stacking nanostructure: 6–7 (FL-GOc), 2–3 (FL-RGOc). - Abstract: The commercial and synthesised few-layer graphene oxide, prepared using oxidation reactions, and few-layer reduced graphene oxide samples were structurally and chemically investigated by the X-ray diffraction (XRD), transmission electron microscopy (TEM) and electron spectroscopy methods, i.e. X-ray photoelectron spectroscopy (XPS) and reflection electron energy loss spectroscopy (REELS). The commercial graphene oxide (FL-GOc) shows a stacking nanostructure of about 22 × 6 nm average diameter by height with the distance of 0.9 nm between 6-7 graphene layers, whereas the respective reduced graphene oxide (FL-RGOc)—about 8 × 1 nm average diameter by height stacking nanostructure with the distance of 0.4 nm between 2-3 graphene layers (XRD). The REELS results are consistent with those by the XRD indicating 8 (FL-GOc) and 4 layers (FL-RGOc). In graphene oxide and reduced graphene oxide prepared from the graphite the REELS indicates 8–11 and 7–10 layers. All graphene oxide samples show the C/O ratio of 2.1–2.3, 26.5–32.1 at% of C sp 3 bonds and high content of functional oxygen groups (hydroxyl—C-OH, epoxy—C-O-C, carbonyl—C=O, carboxyl—C-OOH, water) (XPS). Reduction increases the C/O ratio to 2.8–10.3, decreases C sp 3 content to 11.4–20.3 at% and also the content of C-O-C and C=O groups, accompanied by increasing content of C-OH and C-OOH groups. Formation of additional amount of water due to functional oxygen group reduction leads to layer delamination. Removing of functional oxygen groups

Combatting Prejudice: Understanding Media Prejudice Toward Muslims and Advocacy Organizations’ Efforts to Combat It

Science.gov (United States)

2017-12-01

VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188) Washington, DC 20503. 1. AGENCY USE ONLY (Leave...toward Arabs, Shaheen also produced a documentary in 2006, “Reel Bad Arabs: How Hollywood Vilifies a People,” which sought to expose the negative...stereotyping of Arabs in the media. The documentary provides example after example of cartoonish stereotypes of Arabs as snake charmers, swindlers

Plaadiesitlus

Index Scriptorium Estoniae

2005-01-01

Heliplaatidest: Erdman/Sooäär" Peer Gynt & Other Stories" (esitlus 29. apr. Sakala keskuses), "Mi tango en Buenos Aires" (esitlus 24. apr. Sakala keskuses), Hinkus ja Maarja "Look Around" (esitlus 28. Rock Cafés grupiga Reel People)

Study of optical and electronic properties of nickel from reflection electron energy loss spectra

Science.gov (United States)

Xu, H.; Yang, L. H.; Da, B.; Tóth, J.; Tőkési, K.; Ding, Z. J.

2017-09-01

We use the classical Monte Carlo transport model of electrons moving near the surface and inside solids to reproduce the measured reflection electron energy-loss spectroscopy (REELS) spectra. With the combination of the classical transport model and the Markov chain Monte Carlo (MCMC) sampling of oscillator parameters the so-called reverse Monte Carlo (RMC) method was developed, and used to obtain optical constants of Ni in this work. A systematic study of the electronic and optical properties of Ni has been performed in an energy loss range of 0-200 eV from the measured REELS spectra at primary energies of 1000 eV, 2000 eV and 3000 eV. The reliability of our method was tested by comparing our results with the previous data. Moreover, the accuracy of our optical data has been confirmed by applying oscillator strength-sum rule and perfect-screening-sum rule.

INAUGURAL ISSUE.pmd

African Journals Online (AJOL)

Image

In brief, the media implicitly or explicitly challenges an existing political ... be the case in countries reeling under the effects of dictatorship, mainly in the .... Mwai Kibaki has been in power since the General Election of December 2002 and this.

A Racio-Economic Analysis of Teach for America: Counterstories of TFA Teachers of Color

Science.gov (United States)

Lapayese, Yvette V.; Aldana, Ursula S.; Lara, Eduardo

2014-01-01

This article discusses Teach for America (TFA), one of the alternative education programs of the U.S. Department of Education designed to address the achievement gap of students of color in the country. Topics explored in this research include issues of racism and race in the recruitment and support of its teacher corp; how TFA educators of color…

The investigation of tethered satellite system dynamics

Science.gov (United States)

Lorenzini, E. C.

1986-01-01

The analysis of the rotational dynamics of the satellite was focused on the rotational amplitude increase of the satellite, with respect to the tether, during retrieval. The dependence of the rotational amplitude upon the tether tension variation to the power 1/4 was thoroughly investigated. The damping of rotational oscillations achievable by reel control was also quantified while an alternative solution that makes use of a lever arm attached with a universal joint to the satellite was proposed. Comparison simulations between the Smithsonian Astrophysical Observatory and the Martin Marietta (MMA) computer code of reteival maneuvers were also carried out. The agreement between the two, completely independent, codes was extremely close, demonstrating the reliability of the models. The slack tether dynamics during reel jams was analytically investigated in order to identify the limits of applicability of the SLACK3 computer code to this particular case. Test runs with SLACK3 were also carried out.

Versatile cable handling mechanisms for remote operator control

Energy Technology Data Exchange (ETDEWEB)

Collie, A.A.; White, T.S.; Christopher, M.D.; Hewer, N.D. [Portech Ltd., Portsmouth (United Kingdom)

1996-12-31

This paper describes a system of cable management for keeping the umbilical cables of remote operating vehicles and manipulators tidy and contained without direct intervention by operators. Two distinct types of winding mechanism have been designed. One mechanism is a fixed reel type where the cable is wound onto the reel by a rotating bail arm. The other mechanism consists of a pair of curved belts held against each other between which cable is passed. The complete system includes tension measuring and slack loop take-up devices. The whole system is controlled by a servo system in conjunction with a PC based visual graphic environment which allows a variety of mechanisms to be built up into a system able to handle up to four umbilical cables simultaneously. The control system provides additional tension sensors and cable odometers connected to the control system so that the operator has immediate perception of all the cable parameters, and by defining rules, can set up a variety of alarm situations. (Author).

Versatile cable handling mechanisms for remote operator control

International Nuclear Information System (INIS)

Collie, A.A.; White, T.S.; Christopher, M.D.; Hewer, N.D.

1996-01-01

This paper describes a system of cable management for keeping the umbilical cables of remote operating vehicles and manipulators tidy and contained without direct intervention by operators. Two distinct types of winding mechanism have been designed. One mechanism is a fixed reel type where the cable is wound onto the reel by a rotating bail arm. The other mechanism consists of a pair of curved belts held against each other between which cable is passed. The complete system includes tension measuring and slack loop take-up devices. The whole system is controlled by a servo system in conjunction with a PC based visual graphic environment which allows a variety of mechanisms to be built up into a system able to handle up to four umbilical cables simultaneously. The control system provides additional tension sensors and cable odometers connected to the control system so that the operator has immediate perception of all the cable parameters, and by defining rules, can set up a variety of alarm situations. (Author)

Versatile cable handling mechanisms for remote operator control

International Nuclear Information System (INIS)

Collie, A.A.; White, T.S.; Christopher, M.D.; Hewer, N.D.

1996-01-01

This paper describes a system of cable management for keeping the umbilical cables of remote operating vehicles and manipulators tidy and contained without direct intervention by operators. Two distinct types of winding mechanism have been designed. One mechanism is a fixed reel type where the cable is wound onto the reel by a rotating bail arm. The other mechanism consists of a pair of curved belts held against each other, between which cable is passed. The complete system includes tension measuring and slack loop take-up devices. The whole system is controlled by a servo system in conjunction with a PC based visual graphic environment which allows a variety of mechanisms to be built up into a system able to handle up to four umbilical cables simultaneously. The control system provides additional tension sensors and cable odometers connected to the control system so that the operator has immediate perception of all the cable parameters, and by defining rules, can set up a variety of alarm situations. (UK)

Türkiye’de Sektörel Banka Kredilerinin Gelişimi: Bir Zaman Serisi Analizi(The Development in Sectoral Bank Loans For Turkey: A Time-Series Analysis

Directory of Open Access Journals (Sweden)

Seval MUTLU ÇAMOĞLU

2012-01-01

Full Text Available Cash loans used by sectors are important indicators to observe the situations of economics activities, especially in economic crises periods. This study focuses on the evolution and behavior of the credit market in Turkish financial sector the periods of 1999 – 2010. Recently, the perception of the credit market’s importance in understanding many macroeconomic and financial problems has been changing. The main reason is the acknowledgment of the credit market as a key factor in understanding the transmission channels and of monetary policy. Turkish credit market is still in the stage of growth. In order to analyse the behavior of cash loans by economics activity is used Granger causality test and Johansen cointegration analysis. According to the causality analysis, the findings indicate bilateral relationship between reel credit stock and cash loans used by real estate and building sector. Morever, there are statistically significant long-run relationship between reel credit stock and cash loans used by some important sector in Turkey.

75 FR 7361 - Gray's Reef National Marine Sanctuary Regulations on the Use of Spearfishing Gear

Science.gov (United States)

2010-02-19

... the use of powerheads since the 1981 GRNMS designation, powerhead spear tips and spent shells are... populations. Spearfishing has been shown to remove greater biomass of reef fishes than rod and reel fishing... marine debris. Nevertheless, spearfishing gear and ammunition shells associated with powerhead use have...

Band Alignment and Optical Properties of (ZrO20.66(HfO20.34 Gate Dielectrics Thin Films on p-Si (100

Directory of Open Access Journals (Sweden)

Dahlang Tahir

2011-11-01

Full Text Available (ZrO20.66(HfO20.34 dielectric films on p-Si (100 were grown by atomic layer deposition method, for which the conduction band offsets, valence band offsets and band gaps were obtained by using X-ray photoelectron spectroscopy and reflection electron energy loss spectroscopy. The band gap, valence and conduction band offset values for (ZrO20.66(HfO20.34 dielectric thin film, grown on Si substrate were about 5.34, 2.35 and 1.87 eV respectively. This band alignment was similar to that of ZrO2. In addition, The dielectric function ε (k, ω, index of refraction n and the extinction coefficient k for the (ZrO20.66(HfO20.34 thin films were obtained from a quantitative analysis of REELS data by comparison to detailed dielectric response model calculations using the QUEELS-ε (k,ω-REELS software package. These optical properties are similar with ZrO2 dielectric thin films.

Marshall Blinks: Operational Art and Strategic Vision

Science.gov (United States)

2014-12-04

Phillips, “Memo: Allied Trains during Chili -Fengtien 1924 War,” January 17, 1925, Reel 5, Document 509 in China, 1911-1941 [microfilm]: U.S. Military...understanding; strategic curricula at senior military service schools would likely benefit from the inclusion of operational problem-solving. 166

29 CFR 1926.955 - Overhead lines.

Science.gov (United States)

2010-07-01

... installing or removing wire or cable, strains to which poles and structures will be subjected shall be... being strung in or removed shall be kept under positive control by the use of adequate tension reels... adjacent to energized lines the tension stringing method or other methods which preclude unintentional...

Evaluation of the Tone Fan Noise Design/Prediction System (TFaNS) at the NASA Glenn Research Center

Science.gov (United States)

Koch, L. Danielle

1999-01-01

Version 1.4 of TFaNS, the Tone Fan Noise Design/Prediction System. has recently been evaluated at the NASA Glenn Research Center. Data from tests of the Allison Ultra High Bypass Fan (UHBF) were used to compare to predicted farfield directivities for the radial stator configuration. There was good agreement between measured and predicted directivities at low fan speeds when rotor effects were neglected in the TFaNS calculations. At higher fan speeds, TFaNS is shown to be useful in predicting overall trends rather than absolute sound pressure levels.

A compact ultra-clean system for deploying radioactive sources inside the KamLAND detector

NARCIS (Netherlands)

Banks, T.I.; Freedman, S.J.; Wallig, J.; Ybarrolaza, N.; Gando, A.; Gando, Y.; Ikeda, H.; Inoue, K.; Kishimoto, Y.; Koga, M.; Mitsui, T.; Nakamura, K.; Shimizu, I.; Shirai, J.; Suzuki, A.; Takemoto, Y.; Tamae, K.; Ueshima, K.; Watanabe, H.; Xu, B.D.; Yoshida, H.; Yoshida, S.; Kozlov, A.; Grant, C.; Keefer, G.; Piepke, A.; Bloxham, T.; Fujikawa, B.K.; Han, K.; Ichimura, K.; Murayama, H.; O'Donnell, T.; Steiner, H.M.; Winslow, L.A.; Dwyer, D.A.; McKeown, R.D.; Zhang, C.; Berger, B.E.; Lane, C.E.; Maricic, J.; Miletic, T.; Batygov, M.; Learned, J.G.; Matsuno, S.; Sakai, M.; Horton-Smith, G.A.; Downum, K.E.; Gratta, G.; Efremenko, Y.; Perevozchikov, O.; Karwowski, H.J.; Markoff, D.M.; Tornow, W.; Heeger, K.M.; Detwiler, J.A.; Enomoto, S.; Decowski, M.P.

2015-01-01

We describe a compact, ultra-clean device used to deploy radioactive sources along the vertical axis of the KamLAND liquid-scintillator neutrino detector for purposes of calibration. The device worked by paying out and reeling in precise lengths of a hanging, small-gauge wire rope (cable); an

St Lucie Rod and Reel Fish Health Study

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data provide presence/absence of gross abnormalities on individual fish, identified to species, to allow calculation of the proportion of fish caught that had...

10 Passed Technologies.

Science.gov (United States)

Montfort, Nick

2001-01-01

Argues that not every disappearing technology deserves that fate and presents 10 technologies that have an elegance and simplicity the winners lack such as the electric trolley, pneumatic post, Amiga, ribbon microphone, WordStar, Edison's wax cylinder, slide rule, reel mover, automatic watch, and airship. (Author/ASK)

Maximum field capability of energy saver superconducting magnets

International Nuclear Information System (INIS)

Turkot, F.; Cooper, W.E.; Hanft, R.; McInturff, A.

1983-01-01

At an energy of 1 TeV the superconducting cable in the Energy Saver dipole magnets will be operating at ca. 96% of its nominal short sample limit; the corresponding number in the quadrupole magnets will be 81%. All magnets for the Saver are individually tested for maximum current capability under two modes of operation; some 900 dipoles and 275 quadrupoles have now been measured. The dipole winding is composed of four individually wound coils which in general come from four different reels of cable. As part of the magnet fabrication quality control a short piece of cable from both ends of each reel has its critical current measured at 5T and 4.3K. In this paper the authors describe and present the statistical results of the maximum field tests (including quench and cycle) on Saver dipole and quadrupole magnets and explore the correlation of these tests with cable critical current

Art, Craft, and Assimilation: Curriculum for Native Students during the Boarding School Era

Science.gov (United States)

Slivka, Kevin

2011-01-01

This article sets out to compare and contrast language and rhetoric espoused by Richard Pratt, founder and Superintendent of the Carlisle Indian Industrial School until 1904, and Estelle Reel, author of "Course of Study for Indian Schools" and Superintendent of Indian Schools between 1898-1910, pertaining to the educational philosophy of the…

Femi Osofisan's discourse on Pan-Africanism and reconciliation in ...

African Journals Online (AJOL)

The paper is a critical appraisal of Femi Osofisan's ideological perspectives of Pan-Africanism, imperialism and reconciliation as exemplified in his plays especially in Nkrumah-Ni… Africa-Ni and Reel, Rwanda. The paper also explores the playwright's views on the dynamics of the problems confronting the African continent ...

7 CFR 1755.903 - Fiber optic service entrance cables.

Science.gov (United States)

2010-01-01

... in a duct, or for buried installations by trenching, direct plowing, directional or pneumatic boring... user can reasonably expect that the average bi-directional loss of a fusion splice to be ≤0.1 dB. (5... for qualification of initial and subsequent changes in thermal reel wraps. (i) Sample selection. All...

THE DOCUMENTARY FILM ART AND THE TRUTH QUESTION

African Journals Online (AJOL)

2008-07-17

Jul 17, 2008 ... widely acclaimed as a type of film based on the real world and revolves around real subjects; dealing with real situations and .... C. News-Reel Tradition ' ... documentaries often laid false claims of their exploits, critics .... allegations [that are often times] deliberately spread to further .... 4 (145), Online 2008.

An analysis of the binding of repressor protein ModE to modABCD (molybdate transport) operator/promoter DNA of Escherichia coli.

Science.gov (United States)

Grunden, A M; Self, W T; Villain, M; Blalock, J E; Shanmugam, K T

1999-08-20

Expression of the modABCD operon in Escherichia coli, which codes for a molybdate-specific transporter, is repressed by ModE in vivo in a molybdate-dependent fashion. In vitro DNase I-footprinting experiments identified three distinct regions of protection by ModE-molybdate on the modA operator/promoter DNA, GTTATATT (-15 to -8; region 1), GCCTACAT (-4 to +4; region 2), and GTTACAT (+8 to +14; region 3). Within the three regions of the protected DNA, a pentamer sequence, TAYAT (Y = C or T), can be identified. DNA-electrophoretic mobility experiments showed that the protected regions 1 and 2 are essential for binding of ModE-molybdate to DNA, whereas the protected region 3 increases the affinity of the DNA to the repressor. The stoichiometry of this interaction was found to be two ModE-molybdate per modA operator DNA. ModE-molybdate at 5 nM completely protected the modABCD operator/promoter DNA from DNase I-catalyzed hydrolysis, whereas ModE alone failed to protect the DNA even at 100 nM. The apparent K(d) for the interaction between the modA operator DNA and ModE-molybdate was 0.3 nM, and the K(d) increased to 8 nM in the absence of molybdate. Among the various oxyanions tested, only tungstate replaced molybdate in the repression of modA by ModE, but the affinity of ModE-tungstate for modABCD operator DNA was 6 times lower than with ModE-molybdate. A mutant ModE(T125I) protein, which repressed modA-lac even in the absence of molybdate, protected the same region of modA operator DNA in the absence of molybdate. The apparent K(d) for the interaction between modA operator DNA and ModE(T125I) was 3 nM in the presence of molybdate and 4 nM without molybdate. The binding of molybdate to ModE resulted in a decrease in fluorescence emission, indicating a conformational change of the protein upon molybdate binding. The fluorescence emission spectra of mutant ModE proteins, ModE(T125I) and ModE(Q216*), were unaffected by molybdate. The molybdate-independent mutant Mod

Atom-replaced pins in a Y-based superconductor—single-crystalline perovskite structure including both PrBa2Cu3O7‑x and YBa2Cu3O7‑y

Science.gov (United States)

Hayashi, Mariko; Araki, Takeshi; Ishii, Hirotaka; Nishijima, Gen; Matsumoto, Akiyoshi

2018-05-01

Metal organic deposition using trifluoroacetates (TFA-MOD) provides many uniform superconductors on long metal tapes. The large numbers of long wires have been applied for power grids or superconducting fault current limiters. The related applications worked for a long time without fatal trouble. The quasi-liquid produced during the firing process assisted the perfectly uniform structure in TFA-MOD. On the other hand, when it was desired to introduce artificial pinning centers, the quasi-liquid also enlarged the diameter of the artificial pinning centers to several tens of nanometers. In other words, due to the nature of TFA-MOD, there is very little chance of using TFA-MOD to prepare several nm-sized artificial pinning centers. By proposing atom-replaced pins (ARPs), we aim to overcome the impasse. ARPs are realized by replacing yttrium (Y) with praseodymium (Pr) whose valence number changes from 3+ to approximately 4+. Analytical results suggested that Pr makes pinning centers on a PrBa2Cu3O7‑x (PrBCO) unit cell, and the weak-linked superconductivity derived from PrBCO extends to the adjacent unit cells in the a/b-plane. J c decrease by Pr is five times as large as the volume fraction of Pr in the Y-site of the perovskite structure. On the other hand, T c does not show large degradation in YBCO including 10% PrBCO. These results suggest that PrBCO unit cells are fully dispersed in YBa2Cu3O7‑y matrix. With regard to J c in the magnetic field, (Y0.98, Pr0.02)BCO has been slightly improved compared with pure YBCO only in the region of high temperature and low magnetic field of less than 1 T.

Infektionsrisikoen hos internationale adoptivbørn er reel

DEFF Research Database (Denmark)

Pedersen, Tine Marie; Poulsen, Anja; Pedersen, Freddy Karup

2013-01-01

-27% have gastrointestinal parasites and 1-7% have tuberculosis, but 3-21% have a positive Mantoux test. The studies found none with HIV or HCV and only a few with syphilis. The vaccination status was often deficient and the serology results did not match the vaccination records. All studies conclude...

Neurobehavioral Evidence for the "Near-Miss" Effect in Pathological Gamblers

Science.gov (United States)

Habib, Reza; Dixon, Mark R.

2010-01-01

The purpose of this translational study was twofold: (1) to contrast behavioral and brain activity between pathological and nonpathological gamblers, and (2) to examine differences as a function of the outcome of the spin of a slot machine, focusing predominately on the "Near-Miss"--when two reels stop on the same symbol, and that symbol…

Software recycling at the Hanford Site

International Nuclear Information System (INIS)

HINKELMAN, K.C.

1999-01-01

The Hanford Site was the first Department of Energy (DOE) complex to recycle excess software rather than dispose of it in the landfill. This plan, which took over a year to complete, was reviewed for potential legal conflicts, which could arise from recycling rather than disposal of software. It was determined that recycling was an approved method of destruction and therefore did not conflict with any of the licensing agreements that Hanford had with the software manufacturers. The Hanford Recycling Program Coordinator combined efforts with Pacific Northwest National Laboratory (PNNL) to recycle all Hanford software through a single contract, which went out for bid in January 1995. It was awarded to GreenDisk, Inc. located in Woodinville Washington and implemented in March 1995. The contract was later re-bid and awarded to EcoDisWGreenDisk in December 1998. The new contract included materials such as; software manuals, diskettes, tyvek wrapping, cardboard and paperboard packaging, compact disks (CDs), videotapes, reel-to-reel tapes, magnetic tapes, audio tapes, and many other types of media

50 CFR 600.725 - General prohibitions.

Science.gov (United States)

2010-10-01

.... Longline. F. Recreational fishery F. Hook and line, rod and reel, spear. 9. Atlantic Bluefish Fishery (FMP.... Purse seine, seine. C. Mixed species pot and trap fishery C. Pot, trap. D. Bluefish, croaker, flounder... Bluefish Fishery (FMP): A. Bluefish, croaker, and flounder trawl fishery A. Trawl. B. Pelagic longline and...

Investigation of electrodynamic stabilization and control of long orbiting tethers

Science.gov (United States)

Colombo, G.; Arnold, D.

1984-01-01

The state-of-the-art in tether modelling among participants in the Tethered Satellite System (TSS) Program, the slack tether and its behavior, and certain advanced applications of the tether to problems in orbital mechanics are identified. The features and applications of the TSS software set are reviewed. Modelling the slack tether analytically with as many as 50 mass points and the application of this new model to a study of the behavior of a broken tether near the Shuttle are described. A reel control algorithm developed by SAO and examples of its use are described, including an example which also demonstrates the use of the tether in transferring a heavy payload from a low-orbiting Shuttle to a high circular orbit. Capture of a low-orbiting payload by a Space Station in high circular orbit is described. Energy transfer within a dumbbell-type spacecraft by cyclical reeling operations or gravitational effects on the natural elasticity of the connecting tether, it is shown, can circularize the orbit of the spacecraft.

R-HyMOD: an R-package for the hydrological model HyMOD

Science.gov (United States)

Baratti, Emanuele; Montanari, Alberto

2015-04-01

A software code for the implementation of the HyMOD hydrological model [1] is presented. HyMOD is a conceptual lumped rainfall-runoff model that is based on the probability-distributed soil storage capacity principle introduced by R. J. Moore 1985 [2]. The general idea behind this model is to describe the spatial variability of some process parameters as, for instance, the soil structure or the water storage capacities, through probability distribution functions. In HyMOD, the rainfall-runoff process is represented through a nonlinear tank connected with three identical linear tanks in parallel representing the surface flow and a slow-flow tank representing groundwater flow. The model requires the optimization of five parameters: Cmax (the maximum storage capacity within the watershed), β (the degree of spatial variability of the soil moisture capacity within the watershed), α (a factor for partitioning the flow between two series of tanks) and the two residence time parameters of quick-flow and slow-flow tanks, kquick and kslow respectively. Given its relatively simplicity but robustness, the model is widely used in the literature. The input data consist of precipitation and potential evapotranspiration at the given time scale. The R-HyMOD package is composed by a 'canonical' R-function of HyMOD and a fast FORTRAN implementation. The first one can be easily modified and can be used, for instance, for educational purposes; the second part combines the R user friendly interface with a fast processing unit. [1] Boyle D.P. (2000), Multicriteria calibration of hydrological models, Ph.D. dissertation, Dep. of Hydrol. and Water Resour., Univ of Arizona, Tucson. [2] Moore, R.J., (1985), The probability-distributed principle and runoff production at point and basin scale, Hydrol. Sci. J., 30(2), 273-297.

‘Joined together there is power, sister’: Re-viewing feminist work from the London Film-makers’ Co-operative

Directory of Open Access Journals (Sweden)

Sophie Mayer

2017-01-01

Full Text Available The 'From Reel to Real' season of programmes, the first retrospective of women filmmakers' work from the London Film-makers' Co-operative, curated by Maud Jacquin with Tate Modern and LUX, bring together three generations of filmmakers, and highlight the transmission of a political aesthetics that is both theoretically-informed and embodied.

The Reel Deal: Interpreting HST Multi-Epoch Movies of YSO Jets.

Science.gov (United States)

Frank, Adam

2010-09-01

The goal of this proposal is to bring the theoretical interpretation of Young Stellar Object jets and their environments to a new level of realism. We propose to build on the results of a successful Cycle 16 observing proposal that has obtained 3rd epoch images of HH jets. We will use Adaptive Mesh Refinement MHD simulations {developed by our team} to carry forward a detailed program of modeling and interpretation of the time-dependent behavior revealed in the new, extended multi-epoch data set. Only with the third epoch observations can we explore forces: i.e. accelerations, decelerations and structural changes to develop an accurate understanding of physical processes occurring in hypersonic, magnetized jet flows. Our studies will allow us to characterize the jets and, therefore, make the crucial link with jet central engines. We note an innovative feature of our project is its link with laboratory astrophysical experiments of jets. Our analysis of the observations will be used to determine future laboratory experiments which will explore A?clumpyA? jet propagation issues.

The Escherichia coli modE gene: effect of modE mutations on molybdate dependent modA expression.

Science.gov (United States)

McNicholas, P M; Chiang, R C; Gunsalus, R P

1996-11-15

The Escherichia coli modABCD operon, which encodes a high-affinity molybdate uptake system, is transcriptionally regulated in response to molybdate availability by ModE. Here we describe a highly effective enrichment protocol, applicable to any gene with a repressor role, and establish its application in the isolation of transposon mutations in modE. In addition we show that disruption of the ModE C-terminus abolishes derepression in the absence of molybdate, implying this region of ModE controls the repressor activity. Finally, a mutational analysis of a proposed molybdate binding motif indicates that this motif does not function in regulating the repressor activity of ModE.

Social Studies on the Outside Looking In: Redeeming the Neglected Curriculum

Science.gov (United States)

Hermeling, Andrew Dyrli

2013-01-01

Many social studies teachers are nervous about the coming of Common Core State Standards. With so much emphasis placed on literacy, social studies teachers fear they will see content slashed to leave time for meeting English's non-fiction standards. Already reeling from a lack of attention from the benchmarks put in place by No Child Left Behind,…

RELAP5/MOD3 code coupling model

International Nuclear Information System (INIS)

Martin, R.P.; Johnsen, G.W.

1994-01-01

A new capability has been incorporated into RELAP5/MOD3 that enables the coupling of RELAP5/MOD3 to other computer codes. The new capability has been designed to support analysis of the new advanced reactor concepts. Its user features rely solely on new RELAP5 open-quotes styledclose quotes input and the Parallel Virtual Machine (PVM) software, which facilitates process management and distributed communication of multiprocess problems. RELAP5/MOD3 manages the input processing, communication instruction, process synchronization, and its own send and receive data processing. The flexible capability requires that an explicit coupling be established, which updates boundary conditions at discrete time intervals. Two test cases are presented that demonstrate the functionality, applicability, and issues involving use of this capability

Luminescent properties of [UO{sub 2}(TFA){sub 2}(DMSO){sub 3}], a promising material for sensing and monitoring the uranyl ion

Energy Technology Data Exchange (ETDEWEB)

Martin-Ramos, Pablo; Silva, Manuela Ramos; Silva, Pedro S. Pereira da [Centro de Fisica da Universidade de Coimbra (CFisUC), Department of Physics, Universidade de Coimbra (Portugal); Costa, Ana L.; Melo, J. Sergio Seixas de [Centro de Quimica de Coimbra, Department of Chemistry, Universidade de Coimbra (Portugal); Pereira, Laura C.J. [Centro de Ciencias e Tecnologias Nucleares, Instituto Superior Tecnico, Universidade de Lisboa, Bobadela LRS (Portugal); Martin-Gil, Jesus, E-mail: pmr@unizar.es [Advanced Materials Laboratory, Escuela Tecnica Superior de Ingenierias Agrarias, University of Valladolid, Palencia (Spain)

2016-03-15

An uranyl complex [UO{sub 2}(TFA){sub 2}(DMSO){sub 3}] (TFA=deprotonated trifluoroacetic acid; DMSO=dimethyl sulfoxide) has been successfully synthesized by reacting UO{sub 2}(CH{sub 3}COO){sub 2} ·H{sub 2} O with one equivalent of (CF{sub 3} CO){sub 2} O and DMSO. The complex has been characterized by single-crystal X-ray diffraction, X-ray powder diffraction, elemental analysis, FTIR spectroscopy, thermal analysis and absorption and emission spectroscopies. The spectroscopic properties of the material make it suitable for its application in the sensing and monitoring of uranyl in the PUREX process. (author)

Tulevikuteatri nimel, nüri järjekindlusega - edasi ! / Katrin Nielsen

Index Scriptorium Estoniae

Nielsen, Katrin

2001-01-01

2001. a. 20. märts oli esimene aasta, mil ülemaailmsesse organisatsiooni ASSITEJ kuuluvad laste- ja noorteteatrid tähistasid lasteteatrite päeva. Eesti ASSITEJsse (asutatud 1992. a.) kuuluvad VAT Teater, Narva Teater Ilmarine, Jõhvi teatrid Tuuleveski ja Lepatriinu, Tartu Minerva, Tallinna Reel, Viljandi Nukuteater ning rida üksikliikmeid. Eesti keskuse tulevikuplaanidest

A Field of Desire: Visions of Education in Selected Australian Silent Films

Science.gov (United States)

May, Josephine

2010-01-01

The 1920s was an ambivalent decade in Australia: on the one hand Australians were still reeling from the disastrous effects of the Great War and on the other they were witnessing unprecedented and exciting technological and social changes brought about by modernity. One of the most important modern technologies was the cinema, which Australians…

Dermatologic Diseases in Silk Workers

Directory of Open Access Journals (Sweden)

J S Pasricha

1985-01-01

Full Text Available A survey of 112 workers of a silk facory near Bangalore, for dermatologic diseases revealed (1 a characteristic wearing off of the medial halves of the distal free edges of the finger nail plates in 10 of the 15 cocoonsorters, (2 maceration of the palms in 58 workers of the boiling and reeling section, and (3 pitted keratolysis of the palms, in 42 workers, also from the boiling and reeling section. There was no clinical evidence of contact dermatitis, and patch tests with the silk thread from the cocoons in 25 workers showed a very mild reaction in 2 workers and a doubtful reaction in another two. In addition, one worker from the skeining section had crisscross superficial fissures on the finger tips caused by friction, two workers had paronychia ′of the fingers and four workers had dermatophytFNx01t fingers webs. As in the previous survey, these workers also had a high incidence of ichthyosis (92 workers and hyperketatosis of the palms (62 workers and soles (110 workers.

Surface Tension Directed Fluidic Self-Assembly of Semiconductor Chips across Length Scales and Material Boundaries

Directory of Open Access Journals (Sweden)

Shantonu Biswas

2016-03-01

Full Text Available This publication provides an overview and discusses some challenges of surface tension directed fluidic self-assembly of semiconductor chips which are transported in a liquid medium. The discussion is limited to surface tension directed self-assembly where the capture, alignment, and electrical connection process is driven by the surface free energy of molten solder bumps where the authors have made a contribution. The general context is to develop a massively parallel and scalable assembly process to overcome some of the limitations of current robotic pick and place and serial wire bonding concepts. The following parts will be discussed: (2 Single-step assembly of LED arrays containing a repetition of a single component type; (3 Multi-step assembly of more than one component type adding a sequence and geometrical shape confinement to the basic concept to build more complex structures; demonstrators contain (3.1 self-packaging surface mount devices, and (3.2 multi-chip assemblies with unique angular orientation. Subsequently, measures are discussed (4 to enable the assembly of microscopic chips (10 μm–1 mm; a different transport method is introduced; demonstrators include the assembly of photovoltaic modules containing microscopic silicon tiles. Finally, (5 the extension to enable large area assembly is presented; a first reel-to-reel assembly machine is realized; the machine is applied to the field of solid state lighting and the emerging field of stretchable electronics which requires the assembly and electrical connection of semiconductor devices over exceedingly large area substrates.

Assessment of Human Bio-Behavior During Gait Process Using LifeMOD Software

Directory of Open Access Journals (Sweden)

Liliana Rogozea

2011-01-01

Full Text Available In this paper we present a set of observations concerning the
analysis and assessment of human bio-behavior during gait process. In the first part of the paper the fundamental and theoretical considerations of the gait process are approached and aspects connected to malfunctions are expressed. In the second part of the paper we present the modeling methodology using
the LifeMOD software, while in the third part the results and conclusions are presented.

Erratum: Report on the summit on the future ofacademic medicine in ...

African Journals Online (AJOL)

The prescribed forms should be completed. 8. The ethical rules should be complied with at all times. 7. Die voorgeskrewe vorms moet voltooi word. 8. Die etiese reels moet te alle tye nagekom word. Erratum: Report on the summit on the future ofacademic medicine in SA. Please npte that this repon, which was published on ...

Uue jazzi tärkavad tähed. Tulevased jazz-ööd / Siim Nestor

Index Scriptorium Estoniae

Nestor, Siim, 1974-

2005-01-01

Tänapäeva moodsast jazzist, üritustesarjadest, artistidest ja nende tegevusest. Tänavuse Jazzkaare kontsertidest: Nicole Willis 27. apr. klubis BonBon, Briti soul-funk-ansambel Reel People ja ansambel Hinkus 28. apr. klubis Rock Café, ansambel Cosmoskva 28. apr. Vanalinnastuudio Jazziklubis, norra ansambel Xploding Plastix ja ansambel Kismabande 29. apr. Sakala keskuse suures saalis

NUWE ONTWlKKELlNGS BINNE CHOMSKY SE TEORlE VAN ...

African Journals Online (AJOL)

Sinclair (1978) se oorsigtelike weergawe van .die inhoud van die reels wat binne die OB-raamwerk representasies in LF aflei, hier aan te vul met betre~ing tot. (i) aspekte van die ... van die GB-teorie. In. §3 word ingegaan op hoe die OB-teorie gemodifiseer is tot die GB-teorie ...... linguistic phenomena. That is something ...

["Lääne Elu" väljakuulutatud jõululuuletuste konkursil osalejad

Index Scriptorium Estoniae

2003-01-01

Taive Kesseli "Toa nurgas jõulupuu ehete säras..." ; Ülle Ehala "Advent" ; Heldi Leidsalu "Laul jõuluvanale" ; Silja Paulus "Olen olnud paha laps" ; Erika Raudsepp "Jõuluvanal "Kopp on ees"..." ; Kelvin Vaske "Jõulususs ootab" ; Allar Lillenurm "Öö sinine, helge..." ; Maarja-Liis Mäeste "Jõululuuletus" ; Merilin Serg "Lumi tuli" ; Silvi-Astrid Mickelin "Sajandite reel", "Hing ihkab"

"Reel" Marketing for Your Movie Collections and Film Resources

Science.gov (United States)

Germain, Carol Anne

2012-01-01

Foreign language films generate language acquisition, international cultural films help with global business interactions, medical videos teach students new medical procedures, and movies based on books encourage reading. Films can be instructional as well as FUN! Yet some of these cinematic materials receive little to no attention, not to mention…

Vortex pinning landscape in MOD-TFA YBCO nanostroctured films

Science.gov (United States)

Gutierrez, J.; Puig, T.; Pomar, A.; Obradors, X.

2008-03-01

A methodology of general validity to study vortex pinning in YBCO based on Jc transport measurements is described. It permits to identify, separate and quantify three basic vortex pinning contributions associated to anisotropic-strong, isotropic-strong and isotropic-weak pinning centers. Thereof, the corresponding vortex pinning phase diagrams are built up. This methodology is applied to the new solution-derived YBCO nanostructured films, including controlled interfacial pinning by the growth of nanostructured templates by means of self-assembled processes [1] and YBCO-BaZrO3 nanocomposites prepared by modified solution precursors. The application of the methodology and comparison with a standard solution-derived YBCO film [2], enables us to identify the nature and the effect of the additional pinning centers induced. The nanostructured templates films show c-axis pinning strongly increased, controlling most of the pinning phase diagram. On the other hand, the nanocomposites have achieved so far, the highest pinning properties in HTc-superconductors [3], being the isotropic-strong defects contribution the origin of their unique properties. [1] M. Gibert et al, Adv. Mat. vol 19, p. 3937 (2007) [2] Puig.T et al, SuST EUCAS 2007 (to be published) [3] J. Gutierrez et al, Nat. Mat. vol. 6, p. 367 (2007) * Work supported by HIPERCHEM, NANOARTIS and MAT2005-02047

Strong Flux Pinning of Nano-Sized Ysz Particles in Ybco Films Prepared by Mod Method

Science.gov (United States)

Ye, S.; Suo, H. L.; Liu, M.; Tang, X.; Wu, Z. P.; Zhao, Y.; Zhou, M. L.

The YBCO films with doped YSZ nanoparticles have been prepared successfully by metal organic doepositon method using trifluoroacetates (TFA-MOD) through dissolving Zr organic salt into the YBCO precursor solution. The doped films have well in-plane and out-plane textures detected by both XRD Φ-scan and ω-scan. The YSZ nanoparticles with the size of about 5 ~ 15 nm were observed on the surface of the YBCO films using both FE-SEM and TEM. By comparing the superconducting properties, it was found that the doped YBCO films had lower Tc than that of undoped YBCO films. However, as increasing the applied magnetic field, Jc of the doped YBCO films were much better than that of undoped one. The Jc was as higher as 2.5 times than that of undoped YBCO film at 77 K and 1 T applied field.

Long Gd-123 coated conductor by PLD method

International Nuclear Information System (INIS)

Fuji, H.; Igarashi, M.; Hanada, Y.; Miura, T.; Hanyu, S.; Kakimoto, K.; Iijima, Y.; Saitoh, T.

2008-01-01

We have developed long Gd-123 coated conductors by ion-beam-assisted deposition (IBAD) and pulsed-laser-deposition (PLD) method. Recently, large-scale reel-to-reel apparatus with the 110 cm x 15 cm assisting ion source was introduced to IBAD system. It was enable to produce 500 m-class IBAD-Gd 2 Zr 2 O 7 (GZO) tapes with Δφ of below 15 deg. and high throughputs of 3 m/h. Furthermore, apparatus with multi-lane and laser scanning was introduced to PLD system. As a result, end to end I c of 318 A were obtained for a 201.5 m long tape, and I c x L values were 64,077 Am. Furthermore, 500 m-class deposition was carried out by improving PLD conditions. As a result, I c x L values of 112,166 Am was obtained and it's a world record on August 2007. In the short samples, I c of over 500 A was obtained with Gd-123 thickness of 2.0 μm and over 100 A was obtained in magnetic field of 3 T, perpendicular to c-axis

3D inkjet printed flexible and wearable antenna systems

KAUST Repository

Shamim, Atif

2017-12-22

With the advent of wearable sensors and internet of things (IoT), there is a new focus on electronics which can be bent so that they can be worn or mounted on non-planar objects. Moreover, there is a requirement that these electronics become extremely low cost, to the extent that they become disposable. The flexible and low cost aspects can be addressed by adapting additive manufacturing technologies such as inkjet printing and 3D printing. This paper presents inkjet printing as an emerging new technique to realize low cost, flexible and wearable antenna systems. The ability of inkjet printing to realize electronics on unconventional mediums such as plastics, papers, and textiles has opened up a plethora of new applications. A variety of antennas such as wide-band, multiband, and wearable, etc, which have been realized through additive manufacturing techniques are shown. Many system level examples are also shown, primarily for wireless sensing applications. The promising results of these designs indicate that the day when electronics can be printed like newspapers and magazines through roll-to-roll and reel-to-reel printing is not far away.

Reel help for real life: Film therapy and beyond

Directory of Open Access Journals (Sweden)

Philippa Strong

2015-05-01

Full Text Available In this article the background, development, therapeutical value and praxis of film therapy in Christian counselling will be addressed. The second part of the article shows what the scenery beyond film therapy may look like and how this form of therapy may extend to other areas of digital and electronic media in the current counselling and pastoral care praxis. Postmodernity, as the context within which the society finds itself, is discussed, as well as the place of films in postmodernity. The important use and application of narratives in the postmodern era is discussed. Film therapy’s development as an outgrowth of bibliotherapy is explained. It is further shown how film therapy as a tool in the praxis of therapy may provide the ideal atmosphere for learning, enjoyment and edification. The scope of the article also reaches beyond the current use of film therapy by suggesting the use of other social and electronic media in a therapeutical way as an ever-increasing possibility. The article ends with some pointers in the use of film therapy.

TFA Tanks Focus Area Multiyear Program Plan FY00-FY04

Energy Technology Data Exchange (ETDEWEB)

BA Carteret; JH Westsik; LR Roeder-Smith; RL Gilchrist; RW Allen; SN Schlahta; TM Brouns

1999-10-12

The U.S. Department of Energy (DOE) continues to face a major radioactive waste tank remediation problem with hundreds of waste tanks containing hundreds of thousands of cubic meters of high-level waste (HLW) and transuranic (TRU) waste across the DOE complex. Approximately 68 tanks are known or assumed to have leaked contamination to the soil. Some of the tank contents have reacted to form flammable gases, introducing additional safety risks. These tanks must be maintained in a safe condition and eventually remediated to minimize the risk of waste migration and/or exposure to workers, the public, and the environment. However, programmatic drivers are more ambitious than baseline technologies and budgets will support. Science and technology development investments are required to reduce the technical and programmatic risks associated with the tank remediation baselines. The Tanks Focus Area (TFA) was initiated in 1994 to serve as the DOE Office of Environmental Management's (EM's) national technology development program. for radioactive waste tank remediation. The national program was formed to increase integration and realize greater benefits from DOE's technology development budget. The TFA is responsible for managing, coordinating, and leveraging technology development to support DOE's five major tank sites: Hanford Site (Washington), Idaho National Engineering and Environmental Laboratory (INEEL) (Idaho), Oak Ridge Reservation (ORR) (Tennessee), Savannah River Site (SRS) (South Carolina), and West Valley Demonstration Project (WVDP) (New York). Its technical scope covers the major functions that comprise a complete tank remediation system: waste retrieval, waste pretreatment, waste immobilization, tank closure, and characterization of both the waste and tank with safety integrated into all the functions. The TFA integrates program activities across EM organizations that fund tank technology development, including the Offices of Waste

TFA Tanks Focus Area Multiyear Program Plan FY00-FY04

International Nuclear Information System (INIS)

BA Carteret; JH Westsik; LR Roeder-Smith; RL Gilchrist; RW Allen; SN Schlahta; TM Brouns

1999-01-01

The U.S. Department of Energy (DOE) continues to face a major radioactive waste tank remediation problem with hundreds of waste tanks containing hundreds of thousands of cubic meters of high-level waste (HLW) and transuranic (TRU) waste across the DOE complex. Approximately 68 tanks are known or assumed to have leaked contamination to the soil. Some of the tank contents have reacted to form flammable gases, introducing additional safety risks. These tanks must be maintained in a safe condition and eventually remediated to minimize the risk of waste migration and/or exposure to workers, the public, and the environment. However, programmatic drivers are more ambitious than baseline technologies and budgets will support. Science and technology development investments are required to reduce the technical and programmatic risks associated with the tank remediation baselines. The Tanks Focus Area (TFA) was initiated in 1994 to serve as the DOE Office of Environmental Management's (EM's) national technology development program. for radioactive waste tank remediation. The national program was formed to increase integration and realize greater benefits from DOE's technology development budget. The TFA is responsible for managing, coordinating, and leveraging technology development to support DOE's five major tank sites: Hanford Site (Washington), Idaho National Engineering and Environmental Laboratory (INEEL) (Idaho), Oak Ridge Reservation (ORR) (Tennessee), Savannah River Site (SRS) (South Carolina), and West Valley Demonstration Project (WVDP) (New York). Its technical scope covers the major functions that comprise a complete tank remediation system: waste retrieval, waste pretreatment, waste immobilization, tank closure, and characterization of both the waste and tank with safety integrated into all the functions. The TFA integrates program activities across EM organizations that fund tank technology development, including the Offices of Waste Management (EM-30

TFA Tank Focus Area - multiyear program plan FY98-FY00

International Nuclear Information System (INIS)

1997-09-01

The U.S. Department of Energy (DOE) continues to face a major radioactive waste tank remediation problem with hundreds of waste tanks containing hundreds of thousands of cubic meters of high-level waste (HLW) and transuranic (TRU) waste across the DOE complex. Approximately 80 tanks are known or assumed to have leaked. Some of the tank contents have reacted to form flammable gases, introducing additional safety risks. These tanks must be maintained in a safe condition and eventually remediated to minimize the risk of waste migration and/or exposure to workers, the public, and the environment. However, programmatic drivers are more ambitious than baseline technologies and budgets will support. Science and technology development investments are required to reduce the technical and programmatic risks associated with the tank remediation baselines. The Tanks Focus Area (TFA) was initiated in 1994 to serve as the DOE's Office of Environmental Management's (EM's) national technology development program for radioactive waste tank remediation. The national program was formed to increase integration and realize greater benefits from DOE's technology development budget. The TFA is responsible for managing, coordinating, and leveraging technology development to support DOE's four major tank sites: Hanford Site (Washington), Idaho National Engineering and Environmental Laboratory (INEEL) (Idaho), Oak Ridge Reservation (ORR) (Tennessee), and Savannah River Site (SRS) (South Carolina). Its technical scope covers the major functions that comprise a complete tank remediation system: waste retrieval, waste pretreatment, waste immobilization, tank closure, and characterization of both the waste and tank with safety integrated into all the functions. The TFA integrates program activities across organizations that fund tank technology development EM, including the Offices of Waste Management (EM-30), Environmental Restoration (EM-40), and Science and Technology (EM-50)

TFA Tank Focus Area - multiyear program plan FY98-FY00

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-09-01

The U.S. Department of Energy (DOE) continues to face a major radioactive waste tank remediation problem with hundreds of waste tanks containing hundreds of thousands of cubic meters of high-level waste (HLW) and transuranic (TRU) waste across the DOE complex. Approximately 80 tanks are known or assumed to have leaked. Some of the tank contents have reacted to form flammable gases, introducing additional safety risks. These tanks must be maintained in a safe condition and eventually remediated to minimize the risk of waste migration and/or exposure to workers, the public, and the environment. However, programmatic drivers are more ambitious than baseline technologies and budgets will support. Science and technology development investments are required to reduce the technical and programmatic risks associated with the tank remediation baselines. The Tanks Focus Area (TFA) was initiated in 1994 to serve as the DOE`s Office of Environmental Management`s (EM`s) national technology development program for radioactive waste tank remediation. The national program was formed to increase integration and realize greater benefits from DOE`s technology development budget. The TFA is responsible for managing, coordinating, and leveraging technology development to support DOE`s four major tank sites: Hanford Site (Washington), Idaho National Engineering and Environmental Laboratory (INEEL) (Idaho), Oak Ridge Reservation (ORR) (Tennessee), and Savannah River Site (SRS) (South Carolina). Its technical scope covers the major functions that comprise a complete tank remediation system: waste retrieval, waste pretreatment, waste immobilization, tank closure, and characterization of both the waste and tank with safety integrated into all the functions. The TFA integrates program activities across organizations that fund tank technology development EM, including the Offices of Waste Management (EM-30), Environmental Restoration (EM-40), and Science and Technology (EM-50).

Algebraic Structures on MOD Planes

OpenAIRE

Kandasamy, Vasantha; Ilanthenral, K.; Smarandache, Florentin

2015-01-01

Study of MOD planes happens to a very recent one. In this book, systematically algebraic structures on MOD planes like, MOD semigroups, MOD groups and MOD rings of different types are defined and studied. Such study is innovative for a large four quadrant planes are made into a small MOD planes. Several distinct features enjoyed by these MOD planes are defined, developed and described.

Reel Socialism: Making sense of history in Czech and German cinema since 1989

DEFF Research Database (Denmark)

Bechmann Pedersen, Sune

has been a vehicle of similar sense-making processes in the two history cultures. Much of the research on cinema in Germany has treated the subject in isolation, blind to the commonalities it shares with other post-communist countries, while Czech post-communist history culture and cinema has been...

Advances in Techniques and Technologies for Air Vehicle Navigation and Guidance

Science.gov (United States)

1989-12-01

enfin tenir compte des strategies du pilote. El ie relevera donc au moins en partie du domaine de [’ intelligence artificielle temps reel. et...34 intelligence required for their functional performance. - This symposium was intended to deal with advances in technigues and technologies to design...41* RECONNAISSANCE D’AMERS INTELLIGENTE DANS UNE IMAGE SATELLITE ( Intelligent Landmarks Recognition in Satellites Images) par O.Reichert, D.Berton 42

Minimal disturbance : Ensign's ADR-1000-CT rig aimed at CBM market

International Nuclear Information System (INIS)

Roche, P.

2005-01-01

Ensign Resource Services Group Inc. has recently designed a light, mobile rig aimed at Western Canada's coalbed methane (CBM) market. With a 1000 metre depth rating, the automated ADR-1000-CT rig can drill with either jointed pipe or 3 and a half-inch coil. Tractor units are used to move the rig to avoid the extra traffic generated by third-party trucks. The rig's self-levelling capability creates less environmental disturbance. Each component works on sites with as much as 2 metres difference in elevation, which reduces the need for earth-moving equipment. As drilling moves closer to farms and acreages, minimal environmental disturbance is crucial to the CBM industry. The rig won a 2005 Alberta government award for innovations in workplace health and safety as the design eliminates many of the tasks where injuries occur on conventional rigs. On conventional rigs, drill-strings are suspended from a travelling block which is suspended from the crown of a large, heavy derrick. With the ADR, hydraulic cylinders bear the weight of the drill string, and the derrick serves mainly to guide the top drive. When drilling only with jointed pipe, the coiled-tubing reel is a separate load so that drilling crews don't have to transport it around on programs requiring only jointed pipe. If coil is needed, the reel can be trucked to the site and plugged in to the rest of the rig. Tubing is expected to last 3 times as long as on a regular coiled-tubing rig, as the reel is positioned directly over the rotary table. The rigs have been used for various drilling projects and have performed satisfactorily with high penetration rates due to their large mud pumps. It was concluded that the ADR-1000-CT rig's hydraulic self-levelling capability and agility are helpful features when drilling in a minimal disturbance environment. 3 figs

I informationstidsalderen er vi passive tilskuere til verdens rædsler

DEFF Research Database (Denmark)

Hendricks, Vincent Fella

2014-01-01

Ville du hjælpe et medmenneske i nød, hvis du stod midt i en menneskemængde? Hvad med online? Den psykologiske bystander-effekt er lige så reel i den virtuelle som i den virkelige verden, skriver Vincent Hendricks, som i gadeforsøg har dokumenteret foruroligende sider af vores sociale adfærd. Tænk...

Dielectric response functions of the (000-1), (10-13) GaN single crystalline and disordered surfaces studied by reflection electron energy loss spectroscopy

Czech Academy of Sciences Publication Activity Database

Romanyuk, Olexandr; Jiříček, Petr; Zemek, Josef; Tougaard, S.; Paskova, T.

2011-01-01

Roč. 110, č. 4 (2011), 043507/1-043507/7 ISSN 0021-8979 R&D Projects: GA ČR GPP204/10/P028 Grant - others:MDA(US) HQ0147-09-C-0005 Institutional research plan: CEZ:AV0Z10100521 Keywords : GaN * REELS * optical constants * semiconductor surfaces Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.168, year: 2011

Devenir De l'azote de L'engrais enrichi au n applique au tournesol ...

African Journals Online (AJOL)

L'utilisation de I' azote de I' engrais par la culture de toumesol a ete appreciee par Ia determination du coefficient d'utilisation apparent (CUA) estime par Ia methode de difference et du coefficient d'utilisation reel (CUR) estime par Ia methode isotopique. 80 kg N ha-1 a 4.87% d'atomes en exces de 15N ont ete appliques au ...

Mod i ledelse

DEFF Research Database (Denmark)

Mellon, Karsten

2016-01-01

Mod i ledelse er en efterspurgt vare i offentligt regi som modsvar på stigende kompleksitet og pres. Men hvad er ’mod i ledelse’ – og er du selv en modig leder?......Mod i ledelse er en efterspurgt vare i offentligt regi som modsvar på stigende kompleksitet og pres. Men hvad er ’mod i ledelse’ – og er du selv en modig leder?...

Reflection electron energy loss spectroscopy as efficient technique for the determination of optical properties of polystyrene intermixed with gold nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Deris, Jamileh [Department of Physics, Yasouj University, Yasouj 75918-74831 (Iran, Islamic Republic of); Hajati, Shaaker, E-mail: Hajati@mail.yu.ac.ir [Department of Physics, Yasouj University, Yasouj 75918-74831 (Iran, Islamic Republic of); Department of Semiconductors, Materials and Energy Research Center, Karaj 3177983634 (Iran, Islamic Republic of)

2017-01-15

Highlights: • Reflection Electron Energy Loss Spectroscopy of nano-metalized polymer. • Determination of real part of the dielectric function of nanostructured sample. • Determination of imaginary part of the dielectric function of nanostructured sample. • Determination of refractive index and coefficient of extinction of the sample. • Determination of reflection and absorption coefficients of nano-metalized Polymer. - Abstract: The electronic properties (electron inelastic cross section, energy loss function) of a nano-metalized polystyrene obtained by reflection electron energy loss spectroscopy (REELS) in a previous study [J. Deris, S. Hajati, S. Tougaard, V. Zaporojtchenko, Appl. Surf. Sci. 377 (2016) 44–47], which relies on the Yubero-Tougaard method, were used in the complementary application of Kramers-Kronig transformation to determine its optical properties such as the real part (ε{sub 1}) and imaginary part (ε{sub 2}) of the dielectric function (ε), refractive index (n), coefficients of extinction (k), reflection (R) and absorption (μ). The degree of intermixing of polystyrene thin film and gold nanoparticles of sizes 5.5 nm was controlled by annealing the sample to achieve a morphology in which the nanoparticles were homogeneously distributed within polystyrene. It is worth noting that no data are available on the optical properties of metalized polymers such as gold nanoparticles intermixed with polystyrene. Therefore, this work is of high importance in terms of both the sample studied here and the method applied. The advantage of the method applied here is that no information on the lateral distribution of the nanocomposite sample is required. This means that the REELS technique has been presented here to suitably, efficiently and easily obtain the optical properties of such nano-metalized polymer in which the metal nanoparticles have been vertically well distributed (homogeneous in depth). Therefore, for vertically homogeneous and

Analysis of the Almond Harvesting and Hulling Mechanization Process: A Case Study

Directory of Open Access Journals (Sweden)

Simone Pascuzzi

2017-12-01

Full Text Available The aim of this paper is the analysis of the almond harvesting system with a very high level of mechanization frequently used in Apulia for the almond harvesting and hulling process. Several tests were carried out to assess the technical aspects related to the machinery and to the mechanized harvesting system used itself, highlighting their usefulness, limits, and compatibility within the almond cultivation sector. Almonds were very easily separated from the tree, and this circumstance considerably improved the mechanical harvesting operation efficiency even if the total time was mainly affected by the time required to manoeuvre the machine and by the following manual tree beating. The mechanical pick-up from the ground was not effective, with only 30% of the dropped almond collected, which mainly was caused by both the pick-up reel of the machine being unable to approach the almonds dropped near the base of the trunk and the surface condition of the soil being unsuitably arranged for a mechanized pick-up operation. The work times concerning the hulling and screening processes, carried out at the farm, were heavily affected by several manual operations before, during, and after the executed process; nevertheless, the plant work capability varied from 170 to 200 kg/h with two operators.

"Reel Navajo": The Linguistic Creation of Indigenous Screen Memories

Science.gov (United States)

Peterson, Leighton C.

2011-01-01

Popular cultures are key sites Philip Deloria has called the "production of expectations," and as a major form of popular culture, film has figured prominently in the circulation and reproduction of expectations about Native American peoples since the early twentieth century. This paper explores the ideologies and practices involved in the process…

Mart Laar tagasi reel / Mart Laar ; interv. Paavo Kangur

Index Scriptorium Estoniae

Laar, Mart, 1960-

2007-01-01

Riigikogu liige Mart Laar vastab küsimustele, mis puudutavad tema sissetulekuid ja investeeringuid, perekonda, tööd Swedpanki nõukogus, Gruusia, Montenegro ja Serbia nõustamist, sõprust Suurbritannia endise peaministri Margaret Thatcheriga ning suhteid mitmete Eesti poliitikutega. Lisa: Mart Laar kui investor

Distribution of the type III DNA methyltransferases modA, modB and modD among Neisseria meningitidis genotypes: implications for gene regulation and virulence.

Science.gov (United States)

Tan, Aimee; Hill, Dorothea M C; Harrison, Odile B; Srikhanta, Yogitha N; Jennings, Michael P; Maiden, Martin C J; Seib, Kate L

2016-02-12

Neisseria meningitidis is a human-specific bacterium that varies in invasive potential. All meningococci are carried in the nasopharynx, and most genotypes are very infrequently associated with invasive meningococcal disease; however, those belonging to the 'hyperinvasive lineages' are more frequently associated with sepsis or meningitis. Genome content is highly conserved between carriage and disease isolates, and differential gene expression has been proposed as a major determinant of the hyperinvasive phenotype. Three phase variable DNA methyltransferases (ModA, ModB and ModD), which mediate epigenetic regulation of distinct phase variable regulons (phasevarions), have been identified in N. meningitidis. Each mod gene has distinct alleles, defined by their Mod DNA recognition domain, and these target and methylate different DNA sequences, thereby regulating distinct gene sets. Here 211 meningococcal carriage and >1,400 disease isolates were surveyed for the distribution of meningococcal mod alleles. While modA11-12 and modB1-2 were found in most isolates, rarer alleles (e.g., modA15, modB4, modD1-6) were specific to particular genotypes as defined by clonal complex. This suggests that phase variable Mod proteins may be associated with distinct phenotypes and hence invasive potential of N. meningitidis strains.

Textured YBCO films grown on wires: application to superconducting cables

International Nuclear Information System (INIS)

Dechoux, N; Jiménez, C; Chaudouët, P; Rapenne, L; Sarigiannidou, E; Robaut, F; Petit, S; Garaudée, S; Porcar, L; Soubeyroux, J L; Odier, P; Bruzek, C E; Decroux, M

2012-01-01

Efforts to fabricate superconducting wires made of YBa 2 Cu 3 O 7 (YBCO) on La 2 Zr 2 O 7 (LZO) buffered and biaxially textured Ni-5 at.%W (NiW) are described. Wires were manually shaped from LZO buffered NiW tapes. Different diameters were produced: 1.5, 2 and 3 mm. The wires were further covered with YBCO grown by metal organic chemical vapor deposition (MOCVD). We developed an original device in which the round substrate undergoes an alternated rotation of 180° around its axis in addition to a reel-to-reel translation. This new approach allows covering the whole circumference of the wire with a YBCO layer. This was confirmed by energy dispersive x-ray spectroscopy (EDX) analysis coupled to a scanning electron microscope (SEM). For all wire diameters, the YBCO layer thickness varied from 300 to 450 nm, and the cationic composition was respected. Electron backscattering diffraction (EBSD) measurements were performed directly on an as-deposited wire without surface preparation allowing the investigation of the crystalline quality of the film surface. Combining EBSD with XRD results we show that YBCO grows epitaxially on the LZO buffered NiW wires. For the first time, superconductive behaviors have been detected on round substrates in both the rolling and circular direction. J c reached 0.3 MA cm −2 as measured at 77 K by transport and third-harmonic detection. Those preliminary results confirm the effectiveness of the MOCVD for complex geometries, especially for YBCO deposition on small diameter wires. This approach opens huge perspectives for the elaboration of a new generation of YBCO-based round conductors. (paper)

Real time PV manufacturing diagnostic system

Energy Technology Data Exchange (ETDEWEB)

Kochergin, Vladimir [MicroXact Inc., Blacksburg, VA (United States); Crawford, Michael A. [MicroXact Inc., Blacksburg, VA (United States)

2015-09-01

The main obstacle Photovoltaic (PV) industry is facing at present is the higher cost of PV energy compared to that of fossil energy. While solar cell efficiencies continue to make incremental gains these improvements are so far insufficient to drive PV costs down to match that of fossil energy. Improved in-line diagnostics however, has the potential to significantly increase the productivity and reduce cost by improving the yield of the process. On this Phase I/Phase II SBIR project MicroXact developed and demonstrated at CIGS pilot manufacturing line a high-throughput in-line PV manufacturing diagnostic system, which was verified to provide fast and accurate data on the spatial uniformity of thickness, an composition of the thin films comprising the solar cell as the solar cell is processed reel-to-reel. In Phase II project MicroXact developed a stand-alone system prototype and demonstrated the following technical characteristics: 1) ability of real time defect/composition inconsistency detection over 60cm wide web at web speeds up to 3m/minute; 2) Better than 1mm spatial resolution on 60cm wide web; 3) an average better than 20nm spectral resolution resulting in more than sufficient sensitivity to composition imperfections (copper-rich and copper-poor regions were detected). The system was verified to be high vacuum compatible. Phase II results completely validated both technical and economic feasibility of the proposed concept. MicroXact’s solution is an enabling technique for in-line PV manufacturing diagnostics to increase the productivity of PV manufacturing lines and reduce the cost of solar energy, thus reducing the US dependency on foreign oil while simultaneously reducing emission of greenhouse gasses.

Flux pinning characteristics of Sn-doped YBCO film by the MOD process

International Nuclear Information System (INIS)

Choi, S.M.; Shin, G.M.; Yoo, S.I.

2013-01-01

Highlights: ► The pinning effects of undoped and Sn-doped YBCO films by MOD were characterized. ► Sn-containing nanoparticles were trapped in Sn-doped YBCO films by MOD. ► Sn-containing nanoparticles were identified as the YBa 2 SnO 5.5 (YBSO) phase by TEM. ► The YBSO nanoparticles are responsible for improved flux pinning effect. ► We report the orientation relationship between YBSO nanoparticles and YBCO matrix. -- Abstract: Compared with the undoped YBa 2 Cu 3 O 7−δ (YBCO) film, 10 mol% Sn-doped YBCO film exhibited significantly enhanced critical current densities (J c ) in magnetic fields up to 5 T at 65 and 77 K for H//c, indicating that the Sn-doped YBCO film possesses more effective flux pinning centers. Both samples were grown on the SrTiO 3 (STO) (1 0 0) single crystal substrates by the metal-organic deposition (MOD) process. Larger J c (77 K, 1 T) values of Sn-doped YBCO film are observed over a wide field-orientation angle (θ) except the field-orientations close to the ab-plane of YBCO (85° c values for 85° 2 SnO 5.5 (YBSO) phase by STEM (scanning transmission electron microscopy)-EDS (energy dispersive X-ray spectroscopy) analysis. Further analyses by HR-TEM (high resolution-transmission electron microscopy) revealed that YBSO nanoparticles completely surrounded by the YBCO matrix had random orientation with YBCO while those located at the interface of YBCO/STO substrate had epitaxial relationship with YBCO

MARKET WATCH

Institute of Scientific and Technical Information of China (English)

无

2011-01-01

The manufacturing industry shows signs of recovery as reflected by a rebounding PMI. The initial public offerings market withers due to less than favorable stock markets. Chinese shipbuilders reel from decreasing orders as external demands falter. The mobile payment industry bursts with vitality, though the security issue remains an acute concern. Foreign banks in China lag behind their local competitors in terms of profitability owing to limited ability to attract deposits.

Chemical and structural properties of Pd nanoparticle-decorated graphene-Electron spectroscopic methods and QUASES

Czech Academy of Sciences Publication Activity Database

Lesiak, B.; Jiříček, Petr; Bieloshapka, Igor

2017-01-01

Roč. 404, May (2017), s. 300-309 ISSN 0169-4332 R&D Projects: GA MŠk LM2015088 Institutional support: RVO:68378271 Keywords : graphite (Gr) * graphene oxide (GO) * reduced graphene oxide (RGO) * Pd nanoparticles * XPS * QUASES * REELS * chemical and structural properties Subject RIV: BM - Solid Matter Physics ; Magnetism OBOR OECD: Condensed matter physics (including formerly solid state physics, supercond.) Impact factor: 3.387, year: 2016

Environment Playing Short-handed: Margin of Appreciation in Environmental Jurisprudence of the European Court of Human Rights

Czech Academy of Sciences Publication Activity Database

Müllerová, Hana

2015-01-01

Roč. 24, č. 1 (2015), s. 83-92 ISSN 2050-0394 Grant - others:Rada Programu interní podpory projektů mezinárodní spolupráce AV ČR(CZ) M300681201 Program:M Institutional support: RVO:68378122 Keywords : European Court of Human Rights * margin of appreciation * environment Subject RIV: AG - Legal Sciences http://onlinelibrary.wiley.com/doi/10.1111/reel.12101/epdf

MOD silver metallization for photovoltaics

Science.gov (United States)

Vest, G. M.; Vest, R. W.

1984-01-01

The development of flat plate solar arrays is reported. Photovoltaic cells require back side metallization and a collector grid system on the front surface. Metallo-organic decomposition (MOD) silver films can eliminate most of the present problems with silver conductors. The objectives are to: (1) identify and characterize suitable MO compounds; (2) develop generic synthesis procedures for the MO compounds; (3) develop generic fabrication procedures to screen printable MOD silver inks; (4) optimize processing conditions to produce grid patterns and photovoltaic cells; and (5) develop a model which describes the adhesion between the fired silver film and the silicon surface.

Towards the practical PLD-IBAD coated conductor fabrication - Long wire, high production rate and J c enhancement in a magnetic field

International Nuclear Information System (INIS)

Yamada, Yutaka; Ibi, Akira; Fukushima, Hiroyuki; Kuriki, Reiji; Miyata, Seiki; Takahashi, Kazuhiro; Kobayashi, Hirokazu; Ishida, Satoru; Konishi, Masaya; Kato, Takeharu; Hirayama, Tsukasa; Shiohara, Yuh

2006-01-01

SRL-Nagoya Coated Conductor Center (NCCC) have succeeded in fabricating stably long coated conductor using ion-beam assisted deposition (IBAD) and pulsed laser deposition (PLD) methods. Reel-to-reel PLD equipment with a multi-plume and multi-turn deposition system (MPMT PLD) resulted in a long coated conductor with a high critical current, I c , of 245 A and length of 212.6 m. I c x L (length) reached the record of 52,087 A m. At the same time, the effort to enhance I c and J c in a magnetic filed are also carried out using artificial pinning center and RE element: YSZ mixed Y123 target brought about a high J c especially in the magnetic field parallel to the c-axis. This was attributed to a columnar structure of the 'bamboo structure' (BaZrO 3 /Y123 layer-stacked structure) in Y123 + YSZ sample. Gd123 was also found to be effective for enhancing pinning properties, which was considered to be due to the native stacking faults in the 123 structure. The combination of Gd element and YSZ introduction were also studied and clearly demonstrated the improvement of the anisotropy of J c for a magnetic field angle

WINDING METHOD SELECTION FOR TECHNICAL IMPLEMENTATION OF FIBER OPTIC COMMUNICATION LINE FOR HIGH-SPEED OBJECT

Directory of Open Access Journals (Sweden)

Vyacheslav A. Loparev

2017-07-01

Full Text Available The paper deals with fiber-optical cable winding methods for realization of fiber-optic communication line with high-speed object. We consider possible options of coils for optical cable winding providing mobility of one of the cable ends on an object. It is shown that the choice of a winding process is caused by the need of ensuring the minimum deformation of fiber-optical micro cable in case of separation from a winding body. It is revealed that the minimum tension value and its unevenness are observed when reeling from coils with a rocket form. Design ratios for determination of winding parameters are given. It is shown that reduction of tension unevenness reduces the jumps of internal tension and probability of break and emergence of optical signal local attenuation. Decrease in internal stresses occurs due to the absence of overlapping of the coils of the underlying layers with the overlying ones. To confirm the operability and the possibility of constructive implementation of the selected winding scheme, experiments were carried out to perform rocket and other types of winding with the use of a specially designed machine model. It is shown that the application of line rocket winding enables to achieve stability when reeling a cable during the movement and excludes breaks. Attenuation of optical signal decreases due to the increase in the bend minimum radius. This phenomenon is explained by reduction of the internal stresses causing optical signal attenuation in the place of cable separation from the coil.

Activity in SRL Nagoya Coated Conductor Center for YBCO Coated Conductor by IBAD+ PLD Method -Long, high Ic conductor and a new bamboo-like nanostructure for efficient pinning

International Nuclear Information System (INIS)

Yamada, Yutaka; Ibi, Akira; Fukushima, Hiroyuki; Kuriki, Reiji; Takahashi, Kazuhiro; Kobayashi, Hiroyoshi; Ishida, Satoru; Konishi, Masaya; Miyata, Seiki; Watanabe, Tomonori; Kato, Takeharu; Hirayama, Tsukasa; Shiohara, Yuh

2006-01-01

In SRL-Nagoya Coated Conductor Center (NCCC), long buffered substrate tapes and YBCO coated conductors have been successfully fabricated by using ion-beam assisted deposition (IBAD) and pulsed laser deposition (PLD) methods. For the buffered tape, the PLD-CeO2 method, what we call the 'Self-Epitaxial' method, realized the high degree of in-plane texturing around 4 degrees along the length of 220 m. For YBCO deposition, we have recently introduced new reel-to-reel PLD equipment with a multi-plume and multi-turn deposition system (MPMT PLD). This system succeeded in fabricating a long coated conductor with a high critical current, Ic, of 245 A and length of 212 m. Ic xL (length) reached the world record of 51940 Am. Furthermore, the introduction of artificial pinning center and RE 123 materials were also studied for improving flux pinning and enhancing Ic. A new columnar structure of the 'bamboo structure' (BaZrO3/Y123 layer-stacked structure) was found in Y123+YSZ sample. This columnar structure and the stacking faults in Gd123 were found to be effective for enhancing pinning properties. Using these techniques, we have succeeded in increasing Ic at 0 T to 480 A/cm and also enhancing Ic in a magnetic field

A reverse Monte Carlo method for deriving optical constants of solids from reflection electron energy-loss spectroscopy spectra

International Nuclear Information System (INIS)

Da, B.; Sun, Y.; Ding, Z. J.; Mao, S. F.; Zhang, Z. M.; Jin, H.; Yoshikawa, H.; Tanuma, S.

2013-01-01

A reverse Monte Carlo (RMC) method is developed to obtain the energy loss function (ELF) and optical constants from a measured reflection electron energy-loss spectroscopy (REELS) spectrum by an iterative Monte Carlo (MC) simulation procedure. The method combines the simulated annealing method, i.e., a Markov chain Monte Carlo (MCMC) sampling of oscillator parameters, surface and bulk excitation weighting factors, and band gap energy, with a conventional MC simulation of electron interaction with solids, which acts as a single step of MCMC sampling in this RMC method. To examine the reliability of this method, we have verified that the output data of the dielectric function are essentially independent of the initial values of the trial parameters, which is a basic property of a MCMC method. The optical constants derived for SiO 2 in the energy loss range of 8-90 eV are in good agreement with other available data, and relevant bulk ELFs are checked by oscillator strength-sum and perfect-screening-sum rules. Our results show that the dielectric function can be obtained by the RMC method even with a wide range of initial trial parameters. The RMC method is thus a general and effective method for determining the optical properties of solids from REELS measurements.

Downloading Deterrence: The Logic and Logistics of Coercive Deployment on U.S. Strategy

Science.gov (United States)

2016-06-01

have me work for Dr. Dan Patt on both the Aircrew Labor In-Cockpit Automation System (ALIAS) and Strategic Mobility Architectures (SMA) Programs...worth in the Arab-Israeli wars. Initially, Egyptian and Syrian surface-to-air missiles (SAMs) proved deadly to the Israeli Air Force; however, advances...Heights in the northeast and the Sinai Peninsula to the West.”2 Israeli forces reeled under the weight of the combined Egyptian and Syrian attack

Tether Deployer And Brake

Science.gov (United States)

Carroll, Joseph A.; Alexander, Charles M.

1993-01-01

Design concept promises speed, control, and reliability. Scheme for deploying tether provides for fast, free, and snagless payout and fast, dependable braking. Developed for small, expendable tethers in outer space, scheme also useful in laying transoceanic cables, deploying guidance wires to torpedoes and missiles, paying out rescue lines from ship to ship via rockets, deploying antenna wires, releasing communication and power cables to sonobuoys and expendable bathythermographs, and in reeling out lines from fishing rods.

Reel Teaching = Real Learning: Motivating Reluctant Students through Film Studies

Science.gov (United States)

Smilanich, Brad; Lafreniere, Nicole

2010-01-01

The authors provide a rationale for the critical study of film texts in the English language arts. For struggling or reluctant students, film offers an accessibility that the printed text may not. Students who are intimidated by, or impeded from, accessing print text are able to discuss film with acuity and insight. The study of visual texts can…

International PolyScene-workshop on polymer electronics. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

Topics of this proceedings are: RFID: tagging the opportunities and threats for polymer electronics; polymeric semiconductor development for thin film transistors; hole and electron transport in semiconducting polymers for organic electronics; a circuit based strategy for the development of polymer TFTS; towards a technology for all-polymer electronics; electrically doped organic semiconductors: physics and device applications; organic solar cells and photodetectors; organic solar cells: trends, challenges and positioning in the field of thin-film solar cell technologies; technical production of plastic solar cells: an overview; optical and ESR studies on polymer/fullerene composites for solar cells; targets for OTFT development for active matrix displays; reflective electroactive display (READ) technology and opportunities in printed devices; OFETs, OLEDs, OLDs: organic devices for future polytronic systems; design of active polymer materials and their application in electronic devices; blue emitting ALQ3 for full color organic displays; technologies for the reel-to-reel production of flexible polytronic systems; new developments in polyester films for flexible electronics; printed conductive polymer structures; non-lithographic patterning of polymer transistors; laser structuring- a method for polymer and metal patterning; direct printing of polymer transistor circuits; molecular design of interphases - the key for the development of reliable polymer based products; wafer level packaging - encapsulation of micro structures.

Calculation of reactivity by digital processing; Calcul de la reactivite par traitement numerique

Energy Technology Data Exchange (ETDEWEB)

Hedde, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-12-01

With a view to exploring the new possibilities offered by digital techniques, a description is given of the optimum theoretical conditions of a computation of the realtime reactivity using counting samples (obtained from a nuclear reactor). The degree to which these optimum conditions can be attained depends on the complexity of the processing which can be accepted. A compromise thus has to be made between the accuracy required and the simplicity of the equipment carrying out the processing. An example is given, using a relatively simple structure, which gives an idea of the accuracy of the results obtained over a wide range of reactor power. (author) [French] Dans le but d'explorer les possibilites nouvelles des techniques numeriques, on decrit les conditions theoriques optimales d'un calcul de la reactivite en temps reel a partir d'echantillons de comptage (en provenance d'un reacteur nucleaire). Ces conditions optimales peuvent etre approchees d'autant mieux que l'on accepte un traitement plus complexe. Un compromis est donc a faire entre la precision desiree et la simplicite du materiel assurant le traitement. Un exemple adoptant une structure de complexite reduite permet de juger de la precision des resultats obtenus sur une importante plage d'evolution de la puissance. (auteur)

Calculation of reactivity by digital processing; Calcul de la reactivite par traitement numerique

Energy Technology Data Exchange (ETDEWEB)

Hedde, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-12-01

With a view to exploring the new possibilities offered by digital techniques, a description is given of the optimum theoretical conditions of a computation of the realtime reactivity using counting samples (obtained from a nuclear reactor). The degree to which these optimum conditions can be attained depends on the complexity of the processing which can be accepted. A compromise thus has to be made between the accuracy required and the simplicity of the equipment carrying out the processing. An example is given, using a relatively simple structure, which gives an idea of the accuracy of the results obtained over a wide range of reactor power. (author) [French] Dans le but d'explorer les possibilites nouvelles des techniques numeriques, on decrit les conditions theoriques optimales d'un calcul de la reactivite en temps reel a partir d'echantillons de comptage (en provenance d'un reacteur nucleaire). Ces conditions optimales peuvent etre approchees d'autant mieux que l'on accepte un traitement plus complexe. Un compromis est donc a faire entre la precision desiree et la simplicite du materiel assurant le traitement. Un exemple adoptant une structure de complexite reduite permet de juger de la precision des resultats obtenus sur une importante plage d'evolution de la puissance. (auteur)

TC-13 Mod 0 and Mod 2 Steam Catapult Test Site

Data.gov (United States)

Federal Laboratory Consortium — Located on 11,000 feet of test runway, the TC-13 Mod 0 and Mod 2 Steam Catapult Test Site has in-ground catapults identical to those aboard carriers. This test site...

Welcoming the Dark Side?: Exploring Whitelash and Actual Space Nazis in TFA Fanfiction

Directory of Open Access Journals (Sweden)

Cait Coker

2017-12-01

Full Text Available From the release of its first trailer, Star Wars: The Force Awakens received a racist backlash in response to the character of Finn, a black Stormtrooper turned hero. Nonetheless, after the film’s debut, slash fans across the Internet joined to make the Finn/Poe and Finn/Poe/Rey relationships (known as ‘ships among the most popular in both art and fiction, in what seemed to be a welcome sign of fandom’s evolution from the usual orgy of white cis-bodies. However, by the time TFA was available for legal download, the Kylo/Hux ‘ship had overtaken the others significantly, despite their lack of screentime and actual lines, and the fact that they were “actual space Nazis” and “evil space boyfriends.” This essay will explore the intersections of racism and misogyny in TFA fanfiction and discuss why these most problematic ‘ships have become the most popular, and consider how the mainstreaming of the Empire in the popular imagination is a form of political whitelash.

Didattica della letteratura francese e TFA. Dalle finalità condivise al cantiere aperto delle buone pratiche didattiche

Directory of Open Access Journals (Sweden)

Enrico De Gennaro

2014-06-01

Full Text Available French literature teaching and TFA: From shared objectives to the development of good teaching practices. If the purpose and role of teaching literature in a foreign language – an important aspect of the literary education in the secondary school – have been sufficiently clarified, the educational practices are still an open question that can attract the active interest of the TFA trainees. The concept of educational practices is assumed here in a broad sense. It includes all those aspects related to the setting and organization of teaching that have to be managed by teachers, such as annual work plans, procedures and criteria for the selection of textbooks, types of tests, in particular the ones designed for State exams, assessment grids and more. There is no doubt, however, that one of the pivots of teaching literature in French is the approach to literary texts. If the historical and chronological model seems to be still widespread in Italian schools, other modular approaches offer the advantage of greater flexibility and are more likely to involve students born in the multimedia and digital era. On all the above-mentioned topics, the TFA trainees were able to offer relevant points of view and suggestions.

Comparison of SCDAP/RELAP5/MOD3 to TRAC-PF1/MOD1 for timing analysis of PWR fuel pin failures

International Nuclear Information System (INIS)

Jones, K.R.; Katsma, K.R.; Wade, N.L.; Siefken, L.J.; Straka, M.

1991-01-01

A comparison has been made of SCDAP/RELAP5/MOD3- and TRAC-PF1/MOD1- based calculations of the fuel pin failure timing (time from containment isolation signal to first fuel pin failure) in a loss-of-coolant accident (LOCA). The two codes were used to calculate the thermal-hydraulic boundary conditions for a complete, double-ended, offset-shear break of a cold leg in a Westinghouse 4-loop pressurized water reactor. Both calculations used the FRAPCON-2 code to calculate the steady-state fuel rod behavior and the FRAP-T6 code to calculate the transient fuel rod behavior. The analysis was performed for 16 combinations of fuel burnups and power peaking factors extending up to the Technical Specifications limits. While all calculations were made on a best-estimate basis, the SCDAP/RELAP5/MOD3 code has not yet been fully assessed for large-break LOCA analysis. The results indicate that SCDAP/RELAP5/MOD3 yields conservative fuel pin failure timing results in comparison to those generated using TRAC-PF1/MOD1. 7 refs., 5 figs

Identification of hydrogen and deuterium at the surface of water ice by reflection electron energy loss spectroscopy

International Nuclear Information System (INIS)

Yubero, F.; Toekesi, K.

2009-01-01

Complete text of publication follows. The study of elastically backscattered electrons from surfaces by reflection electron energy loss spectroscopy (REELS) has been recently recommended as an alternative technique to quantify the H content at the surface of a-C:H and polymer samples. This analysis is based on the fact that the energy loss of the incident electrons due to the recoil effect depends on the atomic mass of the particular atom present at the surface. The observed difference in recoil energies between H and O atoms (about 2 eV for 1.5 keV primary electrons) can be easily measured with standard electron spectrometers used in surface analysis. In this paper we go one step forward to explore if, with the same experimental approach, it is possible to differentiate between hydrogen and deuterium (D) in the surface region of a sample. This capability could be important for technological fields such as surface functionalization, where it is desired to distinguish between H and D at surfaces after interaction with labeled compounds. We have chosen normal and deuterated water as test labeled compounds because this polar molecule is of key importance in numerous surface reactions. It has been shown that H and D can be easily distinguished at the surface of water ice [4] using standard REELS measurements with 1000 - 1650 eV primary-electron energies, i.e., a surface analytical technique. Differences in recoil energies of the O - H and O - D atom pairs present in H 2 O and D 2 O have been found to agree with MC simulations (see Fig.1). There are many possible applications of H and D detection by REELS. Among many others, this study opens the possibility of nondestructive studies of deuterium-labeled atoms present or adsorbed on surfaces. For example, studies of H incorporation into a polymer or carbonbased surface after plasma activation with gas mixtures with several labeled molecules containing H atoms. Acknowledgements F.Y. thanks the Spanish Ministry of Science

Programing Procedures Manual (PPM).

Science.gov (United States)

1981-12-15

terms ’reel’, ’unit’, and ’volume’ are synonymous and completely interchangeable in the CLOSE statement. Treatment of sequential mass storage files is...logically equivalent to the treatment of a file on tape or analogous sequential media. * For the purpose of showing the effect of various types of CLOSE...Overlay Area CA6 Address of Abend Relative to beginning of overlay segment The programer can now refer to the compile source listing for the overlay

Irradiation of potassium-silicate glass surfaces: XPS and REELS study

Czech Academy of Sciences Publication Activity Database

Romanyuk, Olexandr; Jiříček, Petr; Zemek, Josef; Houdková, Jana; Jurek, Karel; Gedeon, O.

2016-01-01

Roč. 48, č. 7 (2016), s. 543-546 ISSN 0142-2421. [16th European Conference on Applications of Surface and Interface Analysis (ECASIA). Granada, 28.09.2015-01.10.2015] R&D Projects: GA ČR(CZ) GA15-12580S Institutional support: RVO:68378271 Keywords : electron spectroscopy * potassium silicate glass * x-ray irradiation * electron irradiation Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.132, year: 2016

Functional characterization of the Bradyrhizobium japonicum modA and modB genes involved in molybdenum transport.

Science.gov (United States)

Delgado, María J; Tresierra-Ayala, Alvaro; Talbi, Chouhra; Bedmar, Eulogio J

2006-01-01

A modABC gene cluster that encodes an ABC-type, high-affinity molybdate transporter from Bradyrhizobium japonicum has been isolated and characterized. B. japonicum modA and modB mutant strains were unable to grow aerobically or anaerobically with nitrate as nitrogen source or as respiratory substrate, respectively, and lacked nitrate reductase activity. The nitrogen-fixing ability of the mod mutants in symbiotic association with soybean plants grown in a Mo-deficient mineral solution was severely impaired. Addition of molybdate to the bacterial growth medium or to the plant mineral solution fully restored the wild-type phenotype. Because the amount of molybdate required for suppression of the mutant phenotype either under free-living or under symbiotic conditions was dependent on sulphate concentration, it is likely that a sulphate transporter is also involved in Mo uptake in B. japonicum. The promoter region of the modABC genes has been characterized by primer extension. Reverse transcription and expression of a transcriptional fusion, P(modA)-lacZ, was detected only in a B. japonicum modA mutant grown in a medium without molybdate supplementation. These findings indicate that transcription of the B. japonicum modABC genes is repressed by molybdate.

Who owns the mods?

OpenAIRE

Kow, Yong Ming; Nardi, Bonnie

2010-01-01

Modding, the development of end user software extensions to commercial products, is popular among video gamers. Modders form communities to help each other. Mods can shape software products by weaving in contributions from users themselves based on their own experience of a product. The purpose of this paper is to investigate a conflict between a modding community and a gaming company which reveals contested issues of ownership and governance. We studied an online game, World of Warcraft, a l...

Automatic ultrasonic inspection of pipeline girth weldswith a corrosive resistant alloy (Cra) layer

International Nuclear Information System (INIS)

Ent, Jan Van Der; Portzgen, Niels; Findlay, Niele; Nupen, Oddbjorn; Endal, Geir; Forli, Olav

2007-01-01

There is very limited experience in the Offshore Pipeline industry regarding the Automated Ultrasonic Inspection of Austenitic Girth Welds with CRA layers. The AUT inspection technique to be used for Austenitic welds having CRA layers deviates from the standard approach, which is described within internationally available AUT inspection standards. Due to the coarse grain and anisotropic structure of the weld material, special designed ultrasonic probes and adapted AUT system inspection software were required for examination of the Nome Satellite CRA welds. The 'new' inspection approach was subject for qualification and validation in order to demonstrate that the proposed technique could fulfill stringent inspection requirements which are applicable for the reeling process. Experiences from former projects are difficult to find, since this was the first clad pipeline to be reeled. To determine the overall qualification program to be performed for the Nome Satellite project, reference has been made to the existing development experiences on CRA weld inspection from the Shell Bonga project. The available defect population was obtained out of real CRA pipeline production welds and were therefore of a naturally coarse. Representatives from Technip, Statoil and DNV performed an audit at RTD premises with the objective to draw up an inventory of the performed CRA qualification work and to judge whether this work could be used for the benefit of the Nome Satellite project. It has been concluded that the existing CRA qualification work could be used to complement the Nome Satellite scope of CRA qualification work. As a result the statistical uncertainties were reduced merging the both qualification program results (referenced qualification data and additional Nome Satellite Field qualification work)

Investigation of the influence on residual stresses of porosity in high temperature ZrO2 coatings on Ag tape for magnet technologies

International Nuclear Information System (INIS)

Arman, Yusuf; Aktas, Mehmet; Celik, Erdal; Mutlu, Ibrahim H.; Sayman, Onur

2007-01-01

The present paper reports on the effect on residual stresses of porosity in high temperature ZrO 2 coatings on Ag tape for magnet technologies. ZrO 2 coatings were fabricated on Ag tape substrate using a reel-to-reel sol-gel system. The microstructural evolution of high temperature ZrO 2 coatings was investigated by a scanning electron microscope (SEM). SEM observations revealed that ZrO 2 coatings with crack had some porosity and mosaic structure. Stress analysis was carried out on ZrO 2 coatings with porosity on Ag tape substrates under cryogenic conditions by using classical lamination theory (CLT) for elastic solution and finite element method (FEM) for elasto-plastic solution in the temperature range of 0 o C to -223 o C in liquid helium media. Because of the static equilibrium, tensile force is applied to the Ag substrate, by ZrO 2 coating. The stress component (σ x ) values change rapidly at coating-substrate interface owing to the different moduli of elasticity and thermal expansion coefficient. In spite of the thickness of Ag substrate, the stress components vary from tensile to compressive. In addition, along the thickness of ZrO 2 coating and Ag substrate system, the stress distribution changes linearly. FEM results demonstrate that the failure does not occur in ZrO 2 coating for all porosities due to its high yield strength

Functional overview of the Production Planning Model (ProdMod)

International Nuclear Information System (INIS)

Gregory, M.V.; Paul, P.K.

1995-09-01

The Production Planning Model (ProdMod) has been developed by SRTC for use by High Level Waste Program Management and High Level Waste Engineering as a fast running, integrated, comprehensive model of the entire SRS high level waste (HLW) complex. ProdMod can simulate the response of the HLW complex from its current state to the end of tank clean-up or to any intermediate point. The present document describes the initial release of ProdMod at the end of FY95: a model version that contains all the significant elements from the High-level Waste System Plan Revision 5 and is capable of running the simulation all the way to the postulated completion of waste removal. For the scenario represented by this release, that simulates approximately 70 years of operation of the HLW complex (out to FY2065). This initial release of ProdMod will serve as the immediate starting point for the modeling of the High-Level Waste System Plan Revision 6. Thus ProdMod is expected to be in a state of continuous change and improvement.the initial goal has been to generate a simulation of the processes of interest, with the emphasis on mass and volume balances tracked throughout the HLW complex. That has been accomplished. Future development will add a set of cost equations to the process equations and extend the model for use as a linear programming (optimization) application. The goal of this later phase will be to free the ProdMod user to some extent from the need to set up detailed simulation scenarios: the model will automatically make operational choices which minimize or maximize a given objective function. Appendix A contains the source code

Biomechanical comparison of traditional anchors to all-suture anchors in a double-row rotator cuff repair cadaver model.

Science.gov (United States)

Goschka, Andrew M; Hafer, Jason S; Reynolds, Kirk A; Aberle, Nicholas S; Baldini, Todd H; Hawkins, Monica J; McCarty, Eric C

2015-10-01

To further reduce the invasiveness of arthroscopic rotator cuff repair surgery the all-suture anchor has been developed. The all-suture anchor requires less bone removal and reduces the potential of loose body complications. The all-suture anchor must also have adequate biomechanical strength for the repair to heal. The hypothesis is there is no significant difference in the biomechanical performance of supraspinatus repairs using an all-suture anchor when compared to traditional solid-body suture anchors. Using nine shoulders per group, the supraspinatus tendon was dissected from the greater tuberosity. The four different double row repairs tested were (medial row/lateral row): A: ICONIX2/ICONIX2; B: ICONIX2/Stryker ReelX 3.9mm; C: ICONIX2/Stryker ReelX 4.5mm; D: Arthrex BioComposite CorkScrew FT 4.5mm/Arthrex BioComposite SwiveLock 4.75mm. The ICONIX2 was the only all-suture anchor tested. Tendons underwent cyclic loading from 10 to 100N for 500 cycles, followed by load-to-failure. Data was collected at cycles 5, 100, 200, 300, 400, and 500. One-way ANOVA analysis was used to assess significance (P≤0.05). The anchor combinations tested did not differ significantly in anterior (P>0.4) or posterior (P>0.3) gap formation, construct stiffness (P>0.7), ultimate load (P=0.06), or load to 5mm gap formation (P=0.84). The all-suture anchor demonstrated comparable biomechanical performance in multiple double-row anchor combinations to a combination of traditional solid-body anchors. Thus it may be an attractive option to further reduce the invasiveness of rotator cuff repairs. Copyright © 2015 Elsevier Ltd. All rights reserved.

FFUA - A popular movement FOR nuclear power

International Nuclear Information System (INIS)

Frydenberg, R.

1977-01-01

F F U A (Folkebevegelse for Fredelig Utnyttelse av Atomkraft - Popular Movement for Peaceful Exploitation of Atomic Power) was started in Jely 1976. Membership is concentrated mainly in Oslo and Trondheim and its main functions are to work for the development of nuclear power in Norway and to counteract the influence of the antinuclear groups on politicians and public opinion. The movement cooperates with R E O (Reel Energi Oplysning - True Energy Information) in Denmark and has established a literature service. (JIW)

Molybdate binding by ModA, the periplasmic component of the Escherichia coli mod molybdate transport system.

Science.gov (United States)

Imperial, J; Hadi, M; Amy, N K

1998-03-13

ModA, the periplasmic-binding protein of the Escherichia coli mod transport system was overexpressed and purified. Binding of molybdate and tungstate to ModA was found to modify the UV absorption and fluorescence emission spectra of the protein. Titration of these changes showed that ModA binds molybdate and tungstate in a 1:1 molar ratio. ModA showed an intrinsic fluorescence emission spectrum attributable to its three tryptophanyl residues. Molybdate binding caused a conformational change in the protein characterized by: (i) a shift of tryptophanyl groups to a more hydrophobic environment; (ii) a quenching (at pH 5.0) or enhancement (at pH 7.8) of fluorescence; and (iii) a higher availability of tryptophanyl groups to the polar quencher acrylamide. The tight binding of molybdate did not allow an accurate estimation of the binding constants by these indirect methods. An isotopic binding method with 99MoO42- was used for accurate determination of KD (20 nM) and stoichiometry (1:1 molar ratio). ModA bound tungstate with approximately the same affinity, but did not bind sulfate or phosphate. These KDs are 150- to 250-fold lower than those previously reported, and compatible with the high molybdate transport affinity of the mod system. The affinity of ModA for molybdate was also determined in vivo and found to be similar to that determined in vitro. Copyright 1998 Elsevier Science B.V.

GeoMod 2014 - Modelling in geoscience

Science.gov (United States)

Leever, Karen; Oncken, Onno

2016-08-01

GeoMod is a biennial conference to review and discuss latest developments in analogue and numerical modelling of lithospheric and mantle deformation. GeoMod2014 took place at the GFZ German Research Centre for Geosciences in Potsdam, Germany. Its focus was on rheology and deformation at a wide range of temporal and spatial scales: from earthquakes to long-term deformation, from micro-structures to orogens and subduction systems. It also addressed volcanotectonics and the interaction between tectonics and surface processes (Elger et al., 2014). The conference was followed by a 2-day short course on "Constitutive Laws: from Observation to Implementation in Models" and a 1-day hands-on tutorial on the ASPECT numerical modelling software.

Revisiting "Pearl Harbor": Resistance to Reel and Real Events in an English Language Classroom

Science.gov (United States)

Mackie, Ardiss; Norton, Bonny

2006-01-01

In this article, we draw on disruptive scenes in a postsecondary classroom to examine a critical incident concerning conflicting readings of the film "Pearl Harbor" (2001). We raise crucial questions for pedagogical work with popular film: Who speaks for whom about the meaning of a given film? Under what conditions do students resist…

Alcator C-Mod Tokamak

Data.gov (United States)

Federal Laboratory Consortium — Alcator C-Mod at the Massachusetts Institute of Technology is operated as a DOE national user facility. Alcator C-Mod is a unique, compact tokamak facility that uses...

Evaluation of methods for application of epitaxial layers of superconductor and buffer layers

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-06-01

The recent achievements in a number of laboratories of critical currents in excess of 1.0x10{sup 6} amp/cm{sup 2} at 77K in YBCO deposited over suitably textured buffer/substrate composites have stimulated interest in the potential applications of coated conductors at high temperatures and high magnetic fields. As of today, two different approaches for obtaining the textured substrates have been identified. These are: Los Alamos National Laboratory`s (LANL) ion-beam assisted deposition called IBAD, to obtain a highly textured yttria-stabilized zirconia (YSZ) buffer on nickel alloy strips, and Oak Ridge National Laboratory`s (ORNL) rolling assisted, bi-axial texturized substrate option called RABiTS. Similarly, based on the published literature, the available options to form High Temperature Superconductor (HTS) films on metallic, semi-metallic or ceramic substrates can be divided into: physical methods, and non-physical or chemical methods. Under these two major groups, the schemes being proposed consist of: - Sputtering - Electron-Beam Evaporation - Flash Evaporation - Molecular Beam Epitaxy - Laser Ablation - Electrophoresis - Chemical Vapor Deposition (Including Metal-Organic Chemical Vapor Deposition) - Sol-Gel - Metal-Organic Decomposition - Electrodeposition, and - Aerosol/Spray Pyrolysis. In general, a spool- to-spool or reel-to-reel type of continuous manufacturing scheme developed out of any of the above techniques, would consist of: - Preparation of Substrate Material - Preparation and Application of the Buffer Layer(s) - Preparation and Application of the HTS Material and Required Post-Annealing, and - Preparation and Application of the External Protective Layer. These operations would be affected by various process parameters which can be classified into: Chemistry and Material Related Parameters; and Engineering and Environmental Based Parameters. Thus, one can see that for successful development of the coated conductors manufacturing process, an

Open Source Opens Doors: Repurposing Library Software to Facilitate Faculty Research and Collaboration

Directory of Open Access Journals (Sweden)

Sandra L. Stump

2013-10-01

Full Text Available Normal 0 false false false EN-US X-NONE X-NONE Asked to convert a faculty-created Microsoft Word document of biblical references found within popular films into a searchable database for scholars, the Albright College library staff helped create a multi-access database called Bible in the Reel World. The database relied on student workers for inputting data, used MARC standard formatting for future portability, and encouraged interactive feedback, enabling scholars to submit comments and suggest additional films and references. Using the open source integrated library system Koha, MarcEdit software, and free record exporting from IMDb, library staff created a fully-searchable database for researchers and scholars to examine the use of scripture in popular film.

Overexpression, purification, and partial characterization of ADP-ribosyltransferases modA and modB of bacteriophage T4.

Science.gov (United States)

Tiemann, B; Depping, R; Rüger, W

1999-01-01

There is increasing experimental evidence that ADP-ribosylation of host proteins is an important means to regulate gene expression of bacteriophage T4. Surprisingly, this phage codes for three different ADP-ribosyltransferases, gene products Alt, ModA, and ModB, modifying partially overlapping sets of host proteins. While gene product Alt already has been isolated as a recombinant protein and its action on host RNA polymerases and transcription regulation have been studied, the nucleotide sequences of the two mod genes was published only recently. Their mode of action in the course of the infection cycle and the consequences of the ADP-ribosylations catalyzed by these enzymes remain to be investigated. Here we describe the cloning of the genes, the overexpression, purification, and partial characterization of ADP-ribosyltransferases ModA and ModB. Both proteins seem to act independently, and the ADP-ribosyl moieties are transferred to different sets of host proteins. While gene product ModA, similarly to the Alt protein, acts also on the alpha-subunit of host RNA polymerase, the ModB activity serves another set of proteins, one of which was identified as the S1 protein associated with the 30S subunit of the E. coli ribosomes.

Brute force absorption contrast microtomography

Science.gov (United States)

Davis, Graham R.; Mills, David

2014-09-01

In laboratory X-ray microtomography (XMT) systems, the signal-to-noise ratio (SNR) is typically determined by the X-ray exposure due to the low flux associated with microfocus X-ray tubes. As the exposure time is increased, the SNR improves up to a point where other sources of variability dominate, such as differences in the sensitivities of adjacent X-ray detector elements. Linear time-delay integration (TDI) readout averages out detector sensitivities on the critical horizontal direction and equiangular TDI also averages out the X-ray field. This allows the SNR to be increased further with increasing exposure. This has been used in dentistry to great effect, allowing subtle variations in dentine mineralisation to be visualised in 3 dimensions. It has also been used to detect ink in ancient parchments that are too damaged to physically unroll. If sufficient contrast between the ink and parchment exists, it is possible to virtually unroll the tomographic image of the scroll in order that the text can be read. Following on from this work, a feasibility test was carried out to determine if it might be possible to recover images from decaying film reels. A successful attempt was made to re-create a short film sequence from a rolled length of 16mm film using XMT. However, the "brute force" method of scaling this up to allow an entire film reel to be imaged presents a significant challenge.

Flexible and stretchable electrodes for dielectric elastomer actuators

Science.gov (United States)

Rosset, Samuel; Shea, Herbert R.

2013-02-01

Dielectric elastomer actuators (DEAs) are flexible lightweight actuators that can generate strains of over 100 %. They are used in applications ranging from haptic feedback (mm-sized devices), to cm-scale soft robots, to meter-long blimps. DEAs consist of an electrode-elastomer-electrode stack, placed on a frame. Applying a voltage between the electrodes electrostatically compresses the elastomer, which deforms in-plane or out-of plane depending on design. Since the electrodes are bonded to the elastomer, they must reliably sustain repeated very large deformations while remaining conductive, and without significantly adding to the stiffness of the soft elastomer. The electrodes are required for electrostatic actuation, but also enable resistive and capacitive sensing of the strain, leading to self-sensing actuators. This review compares the different technologies used to make compliant electrodes for DEAs in terms of: impact on DEA device performance (speed, efficiency, maximum strain), manufacturability, miniaturization, the integration of self-sensing and self-switching, and compatibility with low-voltage operation. While graphite and carbon black have been the most widely used technique in research environments, alternative methods are emerging which combine compliance, conduction at over 100 % strain with better conductivity and/or ease of patternability, including microfabrication-based approaches for compliant metal thin-films, metal-polymer nano-composites, nanoparticle implantation, and reel-to-reel production of μm-scale patterned thin films on elastomers. Such electrodes are key to miniaturization, low-voltage operation, and widespread commercialization of DEAs.

Waste removal sequencing using ProdMod

International Nuclear Information System (INIS)

Paul, P.K.; Gregory, M.V.; Davis, N.R.; Brooke, J.N.

1996-01-01

The Savannah River Site (SRS) is starting to solidify its accumulated high-level radioactive waste into borosilicate glass in stainless steel canisters for eventual permanent storage. The in-tank precipitation process (ITP) and extended sludge processing (ESP) are two key operations in the waste processing complex. The supernate and dissolved salt from the waste storage tanks are transferred to the ITP process tank where the solution is decontaminated in batch processes. Soluble radioactive cesium is precipitated with sodium tetraphenylborate and strontium, uranium, and plutonium are adsorbed on monosodium titanate. The precipitate and adsorbent solids, which now contain the radionuclides, are concentrated using crossflow filters. The concentrated solids are sent to the high-level waste vitrification process. The decontaminated salt solution is sent to the low-level waste solidification process to form cement grout. In parallel with the precipitate operations, insoluble sludges that settled originally to the bottom of the waste tanks are reslurried and sent to ESP to undergo washing to reduce soluble salt content and aluminum dissolution, if required. In the vitrification process in the Defense Waste Processing Facility (DWPF), the concentrated precipitate from the ITP is mixed with the washed sludge from ESP and glass frit in proportion to form a stable borosilicate glass. A novel and fast-running Production Planning Model (ProdMod) has been developed to simulate the waste processing operation. This paper describes the application of ProdMod in sequencing the ITP batches and scheduling the ESP batches

Numerical Simulation of Tethered Underwater Kites for Power Generation

Science.gov (United States)

Ghasemi, Amirmahdi; Olinger, David; Tryggvason, Gretar

2015-11-01

An emerging renewable energy technology, tethered undersea kites (TUSK), which is used to extract hydrokinetic energy from ocean and tidal currents, is studied. TUSK systems consist of a rigid-winged ``kite,'' or glider, moving in an ocean current which is connected by tethers to a floating buoy on the ocean surface. The TUSK kite is a current speed enhancement device since the kite can move in high-speed, cross-current motion at 4-6 times the current velocity, thus producing more power than conventional marine turbines. A computational simulation is developed to simulate the dynamic motion of an underwater kite and extendable tether. A two-step projection method within a finite volume formulation, along with an Open MP acceleration method, is employed to solve the Navier-Stokes equations. An immersed boundary method is incorporated to model the fluid-structure interaction of the rigid kite (with NACA 0012 airfoil shape in 2D and NACA 0021 airfoil shape in 3D simulations) and the fluid flow. PID control methods are used to adjust the kite angle of attack during power (tether reel-out) and retraction (reel-in) phases. Two baseline simulations (for kite motions in two and three dimensions) are studied, and system power output, flow field vorticity, tether tension, and hydrodynamic coefficients (lift and drag) for the kite are determined. The simulated power output shows good agreement with established theoretical results for a kite moving in two-dimensions.

A rapid process of Yba2Cu3O7-δ thin film fabrication using trifluoroacetate metal-organic deposition with polyethylene glycol additive

DEFF Research Database (Denmark)

Wu, Wei; Feng, Feng; Shi, Kai

2013-01-01

Trifluoroacetate metal-organic deposition (TFA-MOD) is a promising technique to fabricate YBa2Cu3O7-δ (YBCO) superconducting films. However, its slow pyrolysis process, which usually takes more than 10 h, constitutes a barrier for industrial production. In this study, polyethylene glycol (PEG......) was utilized to reduce the stress generation inside the coated films when the strong pyrolysis reactions happen. With the addition of 30 wt% PEG2000 to the precursor solution, a smooth film surface could be obtained through a rapid pyrolysis process of 15 min. After the optimizations of the crystallization...... and oxygenation processes, mass percentage and molecular weight of PEG additive, YBCO thin films with Jc of about 4.5 MA cm-2 (77 K, self-field) could be routinely fabricated using (20-30) wt% PEG(1000-2000) additive with a total treatment time of about 2 h including the 15 min pyrolysis process time. The effects...

Increase of mitochondrial DNA content and transcripts in early bovine embryogenesis associated with upregulation of mtTFA and NRF1 transcription factors

Directory of Open Access Journals (Sweden)

Heyman Yvan

2005-11-01

Full Text Available Abstract Background Recent work has shown that mitochondrial biogenesis and mitochondrial functions are critical determinants of embryonic development. However, the expression of the factors controlling mitochondrial biogenesis in early embryogenesis has received little attention so far. Methods We used real-time quantitative PCR to quantify mitochondrial DNA (mtDNA in bovine oocytes and in various stages of in vitro produced embryos. To investigate the molecular mechanisms responsible for the replication and the transcriptional activation of mtDNA, we quantified the mRNA corresponding to the mtDNA-encoded cytochrome oxidase 1 (COX1, and two nuclear-encoded factors, i.e. the Nuclear Respiratory Factor 1 (NRF1, and the nuclear-encoded Mitochondrial Transcription Factor A (mtTFA. Results Unlike findings reported in mouse embryos, the mtDNA content was not constant during early bovine embryogenesis. We found a sharp, 60% decrease in mtDNA content between the 2-cell and the 4/8-cell stages. COX1 mRNA was constant until the morula stage after which it increased dramatically. mtTFA mRNA was undetectable in oocytes and remained so until the 8/16-cell stage; it began to appear only at the morula stage, suggesting de novo synthesis. In contrast, NRF1 mRNA was detectable in oocytes and the quantity remained constant until the morula stage. Conclusion Our results revealed a reduction of mtDNA content in early bovine embryos suggesting an active process of mitochondrial DNA degradation. In addition, de novo mtTFA expression associated with mitochondrial biogenesis activation and high levels of NRF1 mRNA from the oocyte stage onwards argue for the essential function of these factors during the first steps of bovine embryogenesis.

Assessment of RELAP5/MOD2 and RELAP5/MOD1-EUR codes on the basis of LOBI-MOD2 test results

International Nuclear Information System (INIS)

D'Auria, F.; Mazzini, M.; Oriolo, F.; Galassi, G.M.

1989-10-01

The present report deals with an overview of the application of RELAP5/MOD2 and RELAP5/MOD1-EUR codes to tests performed in the LOBI/MOD2 facility. The work has been carried out in the frame of a contract between Dipartimento di Costruzioni Meccaniche e Nucleari (DCMN) of Pisa University and CEC. The Universities of Roma, Pisa, Bologna and Palermo and the Polytechnic of Torino performed the post-test analysis of the LOBI experiment under the supervision of DCMN. In the report the main outcomes from the analysis of the LOBI experiments are given with the attempt to identify deficiencies in the modelling capabilities of the used codes

An impressive proceeding for the seven-year Finnish Tekes fuel cell programme : how a small country can be strong in developing emerging technologies

Energy Technology Data Exchange (ETDEWEB)

Ojapalo, A.; Saari, J.; Kotila, H.; Korkiakoski, M. [Tekes, Finnish Funding Agency for Technology and Innovation, Helsinki (Finland)

2009-07-01

Finland's national Fuel Cell strategy was created in 2006 in an effort to reduce air pollution and promote the use of renewable energy sources. The Fuel Cell Programme, which was launched in 2007 by the Finnish Funding Agency for Technology and Innovation has already funded 26 projects involving fuel cells for vehicles, as well as for stationary, portable and utility purposes. Total funding for the projects is over 12 million Euros. Industry partners have also invested in fuel cell development because of Tekes' promotion of consortium research projects that involve collaboration between public research organizations, universities, and companies. An essential feature of the Programme's activities is the cooperation between projects developing stationary SOFC, PEMFC, and hybrid solutions which enables synergy in component development. The corporate projects have resulted in successful demonstrations and commercial products. Finland is particularly strong in fuel cell system integration worldwide, and its technical research center (VTT) specializes in supporting industrial needs. Wartsila's integrated stationary system has proceeded to the field test phase with a fuel cell operated power unit in a housing area. Other commercial products are also being marketed, such as an alkaline fuel cell for cottage and leisure use. Other research projects involve telecommunications, nanotechnology, the printed enzymatic reel-to-reel fuel cell tag for RFID or medical applications, and hybridization for fuel cell vehicles. The programme encourages international collaboration through researcher exchange and coordinated research projects.

Norris Bradbury Tribute by J. Robert Oppenheimer

Energy Technology Data Exchange (ETDEWEB)

Meade, Roger Allen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-04-27

Stored on a reel of microfilm are three faint and barely readable letters written on the occasion of Norris Bradbury’s fifteen-year anniversary as Director of the (then) Los Alamos Science Laboratory. The first letter, written by Los Alamos Public Relations Officer John V. Young, asks Oppenheimer to send a “congratulatory message to be read at a ceremony honoring Bradbury’s tenure as Laboratory Director. The second letter is Oppenheimer’s response to Young, and the third is Oppenheimer’s congratulatory message to Bradbury. The three letters are transcribed below.

Are libraries obsolete? an argument for relevance in the digital age

CERN Document Server

Herring, Mark Y

2014-01-01

The digital age has transformed information access in ways that few ever dreamed. But the afterclap of our digital wonders has left libraries reeling as they are no longer the chief contender in information delivery. The author gives both sides--the web aficionados, some of them unhinged, and the traditional librarians, some blinkered--a fair hearing but misconceptions abound. Internet be-all and end-all enthusiasts are no more useful than librarians who urge fellow professionals to be all things to all people. The American Library Association, wildly democratic at its best and worst, appear

From the Last Interglacial to the Anthropocene: Modelling a Complete Glacial Cycle (PalMod)

Science.gov (United States)

Brücher, Tim; Latif, Mojib

2017-04-01

We will give a short overview and update on the current status of the national climate modelling initiative PalMod (Paleo Modelling, www.palmod.de). PalMod focuses on the understanding of the climate system dynamics and its variability during the last glacial cycle. The initiative is funded by the German Federal Ministry of Education and Research (BMBF) and its specific topics are: (i) to identify and quantify the relative contributions of the fundamental processes which determined the Earth's climate trajectory and variability during the last glacial cycle, (ii) to simulate with comprehensive Earth System Models (ESMs) the climate from the peak of the last interglacial - the Eemian warm period - up to the present, including the changes in the spectrum of variability, and (iii) to assess possible future climate trajectories beyond this century during the next millennia with sophisticated ESMs tested in such a way. The research is intended to be conducted over a period of 10 years, but with shorter funding cycles. PalMod kicked off in February 2016. The first phase focuses on the last deglaciation (app. the last 23.000 years). From the ESM perspective PalMod pushes forward model development by coupling ESM with dynamical ice sheet models. Computer scientists work on speeding up climate models using different concepts (like parallelisation in time) and one working group is dedicated to perform a comprehensive data synthesis to validate model performance. The envisioned approach is innovative in three respects. First, the consortium aims at simulating a full glacial cycle in transient mode and with comprehensive ESMs which allow full interactions between the physical and biogeochemical components of the Earth system, including ice sheets. Second, we shall address climate variability during the last glacial cycle on a large range of time scales, from interannual to multi-millennial, and attempt to quantify the relative contributions of external forcing and processes

PROVE IDRAULICHE SU UN SEMOVENTE IRRIGUO

Directory of Open Access Journals (Sweden)

Giuseppe Taglioli

2007-09-01

Full Text Available The correct management of the irrigation is a well known factor of success in agriculture, even as regard the water saving. As a consequence it was tested here a very common medium sized hose-reel irrigation machine, known in Italy as rotolone. Several hydraulic and technical aspects were investigated, in two tests on a 3 ha field: – the hydraulic distribution on the field, measured by means of 55 rainfall meter; – the uniformity of the forward speed and the effectiveness of the controller; – the effect of the standstill times on distribution quality; – the hydraulic performance declared by the manufacturer; – the water consumption, the manpower requirements; – the quality of irrigation. Moreover a theoretical analysis of the best overlapping between the range of two adjacent sprinkler was developed. The tests have shown the importance of the regularization of the backward speed: in lack of this the variations can reach the value of 70%. The value of 85% in overlapping of wetted areas, recommended by manufacturers, was theoretically justified. The measured mean range, at the recommended pressure, was 10% lower than declared by manufacturer. The rain hourly intensity was too high for the needing of the clay soil of the field. The jet spraying was coarse in relationship to the clay fraction of the soil but not for the crop (maize. The hose-reel irrigation machine examined here, can maintain an high level of feasibility if some improvement were adopted.

Microstructural and superconducting properties of high current metal-organic chemical vapor deposition YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} coated conductor wires

Energy Technology Data Exchange (ETDEWEB)

Holesinger, T G; Maiorov, B; Ugurlu, O; Civale, L [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Chen, Y; Xiong, X; Xie, Y; Selvamanickam, V [SuperPower, Inc., Schenectady, NY 12304 (United States)

2009-04-15

Metal-organic chemical vapor deposition (MOCVD) on flexible, ion beam assisted deposition MgO templates has been used to produce high critical current density (J{sub c}) (Y,Sm){sub 1}Ba{sub 2}Cu{sub 3}O{sub y} (REBCO) films suitable for use in producing practical high temperature superconducting (HTS) coated conductor wires. Thick films on tape were produced with sequential additions of 0.7 {mu}m of REBCO via a reel-to-reel progression through a custom-designed MOCVD reactor. Multi-pass processing for thick film deposition is critically dependent upon minimizing surface secondary phase formation. Critical currents (I{sub c}s) of up to 600 A/cm width (t = 2.8 {mu}m, J{sub c} = 2.6 MA cm{sup -2}, 77 K, self-field) were obtained in short lengths of HTS wires. These high performance MOCVD films are characterized by closely spaced (Y,Sm){sub 2}O{sub 3} nanoparticle layers that may be tilted relative to the film normal and REBCO orientation. Small shifts in the angular dependence of J{sub c} in low and intermediate applied magnetic fields can be associated with the tilted nanoparticle layers. Also present in these films were YCuO{sub 2} nanoplates aligned with the YBCO matrix (short dimension perpendicular to the film normal), threading dislocations, and oriented composite defects (OCDs). The latter structures consist of single or multiple a-axis oriented grains coated on each side with insulating (Y,Sm){sub 2}O{sub 3} or CuO. The OCDs formed a connected network of insulating phases by the end of the fourth pass. Subsequent attempts at adding additional layers did not increase I{sub c}. There is an inconsistency between the measured J{sub c} and the observed microstructural degradation that occurs with each additional layer, suggesting that previously deposited layers are improving with each repeated reactor pass. These dynamic changes suggest a role for post-processing to optimize superconducting properties of as-deposited films, addressing issues associated with

Microstructural and superconducting properties of high current metal-organic chemical vapor deposition YBa2Cu3O7-δ coated conductor wires

International Nuclear Information System (INIS)

Holesinger, T G; Maiorov, B; Ugurlu, O; Civale, L; Chen, Y; Xiong, X; Xie, Y; Selvamanickam, V

2009-01-01

Metal-organic chemical vapor deposition (MOCVD) on flexible, ion beam assisted deposition MgO templates has been used to produce high critical current density (J c ) (Y,Sm) 1 Ba 2 Cu 3 O y (REBCO) films suitable for use in producing practical high temperature superconducting (HTS) coated conductor wires. Thick films on tape were produced with sequential additions of 0.7 μm of REBCO via a reel-to-reel progression through a custom-designed MOCVD reactor. Multi-pass processing for thick film deposition is critically dependent upon minimizing surface secondary phase formation. Critical currents (I c s) of up to 600 A/cm width (t = 2.8 μm, J c = 2.6 MA cm -2 , 77 K, self-field) were obtained in short lengths of HTS wires. These high performance MOCVD films are characterized by closely spaced (Y,Sm) 2 O 3 nanoparticle layers that may be tilted relative to the film normal and REBCO orientation. Small shifts in the angular dependence of J c in low and intermediate applied magnetic fields can be associated with the tilted nanoparticle layers. Also present in these films were YCuO 2 nanoplates aligned with the YBCO matrix (short dimension perpendicular to the film normal), threading dislocations, and oriented composite defects (OCDs). The latter structures consist of single or multiple a-axis oriented grains coated on each side with insulating (Y,Sm) 2 O 3 or CuO. The OCDs formed a connected network of insulating phases by the end of the fourth pass. Subsequent attempts at adding additional layers did not increase I c . There is an inconsistency between the measured J c and the observed microstructural degradation that occurs with each additional layer, suggesting that previously deposited layers are improving with each repeated reactor pass. These dynamic changes suggest a role for post-processing to optimize superconducting properties of as-deposited films, addressing issues associated with reproducibility and manufacturing yield.

Multi-level mass store implementation

International Nuclear Information System (INIS)

Leighton, J.F.

1977-12-01

The National Magnetic Fusion Energy Center is currently installing a very large mass data storage system. The storage system will comprise three distinct levels: magnetic disk, a CDC 38500 Mass Storage Facility, and high density 10 1 / 2 -inch reel magnetic tape. The resulting storage facility will emphasize the best characteristics of each level while masking the weaker characteristics. The goal is to give the overall system the performance and reliability of a magnetic disk system, the capacity of the CDC 38500 system, and the off-line archival storage characteristic of magnetic tape. 2 figures

Moving Past "Hello World": Learning to Mod in an Online Affinity Space

Science.gov (United States)

Subramanian, Shree Durga

2012-01-01

Game modding has increasingly become a mainstream and "cutting edge" medium to foster a broad range of critical software design and programming practices to learners coming from wide-ranging educational and professional backgrounds. Participatory practices, like game modding, are highly interest-driven and entail intense engagement with…

Radon transport modelling: User's guide to RnMod3d

DEFF Research Database (Denmark)

Andersen, Claus Erik

2000-01-01

RnMod3d is a numerical computer model of soil-gas and radon transport in porous media. It can be used, for example, to study radon entry from soil into houses in response to indoor-outdoor pressure differences or changes in atmospheric pressure. It canalso be used for flux calculations of radon...... decay, diffusion and advection of radon can be solved. Moisture is included in the model, and partitioning ofradon between air, water and soil grains (adsorption) is taken into account. Most parameters can change in time and space, and transport parameters (diffusivity and permeability) may...... be anisotropic. This guide includes benchmark tests based on simpleproblems with known solutions. RnMod3d has also been part of an international model intercomparison exercise based on more complicated problems without known solutions. All tests show that RnMod3d gives results of good quality....

RELAP5/MOD2 code assessment for the Semiscale Mod-2C Test S-LH-1

International Nuclear Information System (INIS)

Fineman, C.P.

1986-01-01

RELAP5/MOD2, Cycle 36.02, was assessed using data from Semiscale Mod-2C experiment S-LH-1. The major phenomena that occurred during the experiment were calculated by RELAP5/MOD2, although the duration and the magnitude of their effect on the transient were not always well calculated. Areas defined where further work was needed to improve the RELAP5 calculation include: (1) the system energy balance, (2) core interfacial drag, and 3) the heat transfer logic rod dryout criterion

Present status and future prospect of coated conductor development and its application in Japan

Science.gov (United States)

Shiohara, Y.; Yoshizumi, M.; Izumi, T.; Yamada, Y.

2008-03-01

The current national project on coated conductors using Y-system superconductors has been carried out over the project period (FY2003-FY2007). In this paper, the current status and the future prospect of this project are reviewed. The high performance tape development group, consisting of Fujikura and SRL-NCCC, has worked on the tape by PLD-REBCO superconducting layers on PLD-CeO2/IBAD-GZO buffered substrates. A high product of Ic and L, higher than 112 166 A m, was achieved in a 368 m-304.8 A GdBCO tape whose Ic value is mostly above 350 A/cm in width. The performance under magnetic field was also improved up to 42 A at 3 T in a GdBCO short film with doping of ZrO2. 61 m long GdBCO tape with ZrO2 doping showed a high Ic value of 220 A at self field and 30 A at 3 T. On the other hand, another group focusing on low production cost has worked on TFA-MOD and MOCVD processes. The extremely high Ic value of 735 A/cm-w was obtained in TFA-MOD films on PLD-CeO2/IBAD-GZO/Hastelloy substrate due to the effect of Ba-poor nominal composition. In efforts towards long tape production by the SWCC group, a 200 m long tape with a high Ic value of 200 A/cm-w was obtained using a batch-type furnace. The Ic × L value of this tape was 40 000 A m, which is the highest value in the world obtained by the TFA-MOD process. Based on the above achievements in coated conductor process development, two new additional goals were set in the project. One is the development of extremely low cost tape and the other is the development of the basic technologies for making electric power devices of cables, transformers, motors, current-limiters and cryocoolers. Some of the new investigations have already revealed marvellous results, such as a 15 kW motor, low AC loss coils, low AC loss cables, etc.

Present status and future prospect of coated conductor development and its application in Japan

International Nuclear Information System (INIS)

Shiohara, Y; Yoshizumi, M; Izumi, T; Yamada, Y

2008-01-01

The current national project on coated conductors using Y-system superconductors has been carried out over the project period (FY2003-FY2007). In this paper, the current status and the future prospect of this project are reviewed. The high performance tape development group, consisting of Fujikura and SRL-NCCC, has worked on the tape by PLD-REBCO superconducting layers on PLD-CeO 2 /IBAD-GZO buffered substrates. A high product of I c and L, higher than 112 166 A m, was achieved in a 368 m-304.8 A GdBCO tape whose I c value is mostly above 350 A/cm in width. The performance under magnetic field was also improved up to 42 A at 3 T in a GdBCO short film with doping of ZrO 2 . 61 m long GdBCO tape with ZrO 2 doping showed a high I c value of 220 A at self field and 30 A at 3 T. On the other hand, another group focusing on low production cost has worked on TFA-MOD and MOCVD processes. The extremely high I c value of 735 A/cm-w was obtained in TFA-MOD films on PLD-CeO 2 /IBAD-GZO/Hastelloy substrate due to the effect of Ba-poor nominal composition. In efforts towards long tape production by the SWCC group, a 200 m long tape with a high I c value of 200 A/cm-w was obtained using a batch-type furnace. The I c x L value of this tape was 40 000 A m, which is the highest value in the world obtained by the TFA-MOD process. Based on the above achievements in coated conductor process development, two new additional goals were set in the project. One is the development of extremely low cost tape and the other is the development of the basic technologies for making electric power devices of cables, transformers, motors, current-limiters and cryocoolers. Some of the new investigations have already revealed marvellous results, such as a 15 kW motor, low AC loss coils, low AC loss cables, etc

Present status and future prospect of coated conductor development and its application in Japan

Energy Technology Data Exchange (ETDEWEB)

Shiohara, Y; Yoshizumi, M; Izumi, T [Superconductivity Research Laboratory-ISTEC, 10-13 Shinonome 1-Chome, Koto-ku, Tokyo 135-0062 (Japan); Yamada, Y [Nagoya Coated Conductor Center, Superconductivity Research Laboratory-ISTEC, (c-o) Japan Fine Ceramics Center, 4-1 Mutsuno 2-Chome, Atsuta-ku, Nagoya 456-8587 (Japan)], E-mail: shiohara@istec.or.jp

2008-03-01

The current national project on coated conductors using Y-system superconductors has been carried out over the project period (FY2003-FY2007). In this paper, the current status and the future prospect of this project are reviewed. The high performance tape development group, consisting of Fujikura and SRL-NCCC, has worked on the tape by PLD-REBCO superconducting layers on PLD-CeO{sub 2}/IBAD-GZO buffered substrates. A high product of I{sub c} and L, higher than 112 166 A m, was achieved in a 368 m-304.8 A GdBCO tape whose I{sub c} value is mostly above 350 A/cm in width. The performance under magnetic field was also improved up to 42 A at 3 T in a GdBCO short film with doping of ZrO{sub 2}. 61 m long GdBCO tape with ZrO{sub 2} doping showed a high I{sub c} value of 220 A at self field and 30 A at 3 T. On the other hand, another group focusing on low production cost has worked on TFA-MOD and MOCVD processes. The extremely high I{sub c} value of 735 A/cm-w was obtained in TFA-MOD films on PLD-CeO{sub 2}/IBAD-GZO/Hastelloy substrate due to the effect of Ba-poor nominal composition. In efforts towards long tape production by the SWCC group, a 200 m long tape with a high I{sub c} value of 200 A/cm-w was obtained using a batch-type furnace. The I{sub c} x L value of this tape was 40 000 A m, which is the highest value in the world obtained by the TFA-MOD process. Based on the above achievements in coated conductor process development, two new additional goals were set in the project. One is the development of extremely low cost tape and the other is the development of the basic technologies for making electric power devices of cables, transformers, motors, current-limiters and cryocoolers. Some of the new investigations have already revealed marvellous results, such as a 15 kW motor, low AC loss coils, low AC loss cables, etc.

Automatic digitization of SMA data

Science.gov (United States)

Väänänen, Mika; Tanskanen, Eija

2017-04-01

In the 1970's and 1980's the Scandinavian Magnetometer Array produced large amounts of excellent data from over 30 stations In Norway, Sweden and Finland. 620 film reels and 20 kilometers of film have been preserved and the longest time series produced in the campaign span almost uninterrupted for five years, but the data has never seen widespread use due to the choice of medium. Film is a difficult medium to digitize efficiently. Previously events of interest were searched for by hand and digitization was done by projecting the film on paper and plotting it by hand. We propose a method of automatically digitizing geomagnetic data stored on film and extracting the numerical values from the digitized data. The automatic digitization process helps in preserving old, valuable data that might otherwise go unused.

Atomic and electronic structure of N-terminated GaN(0001) (1 × 1) surface

Czech Academy of Sciences Publication Activity Database

Romanyuk, Olexandr; Jiříček, Petr; Paskova, T.

2012-01-01

Roč. 398, č. 1 (2012), s. 1-6 ISSN 1742-6588. [17th International School on Condensed Matter Pjysics (ISCMP): Open Problems in Condesed Matter Physics, BIiomedical Physics and their Applications. Varna, 02.09.2012-07..09.2012] R&D Projects: GA ČR GPP204/10/P028 Grant - others:AV ČR(CZ) M100101201 Institutional research plan: CEZ:AV0Z10100521 Keywords : clean surfaces * GaN * photoelectron diffraction * REELS * ab initio DFT * optical response Subject RIV: BM - Solid Matter Physics ; Magnetism http://iopscience.iop.org/1742-6596/398/1/012013

The Development of Performance-Based Auditory Aviation Classification Standards in the U.S. Navy,

Science.gov (United States)

1987-12-01

Gerontology, Vol. 24(2), pp. 189-192, 1969. 10. Palva, A. and Jokinen, K., ’The Role of the Binaural Test in Filtered Speech Audiometry." Acta Oto...BEAD BEAT BEAN REEL HEEL EEL PAVE PALE PAY WIG RIG FIG GALE MALE TALE PAGE PANE PACE PIG BIG DIG PALE SALE BALE DID DIN DIP SAP SAG SAD SIN WIN...SEEN SEED SEEK CAME GAME SAME NEAT BEAT SEAT SEEM SEETHE SEEP PAD PASS PATH PARK MARK HARK SIP RIP TIP PACK PAN PAT DARK LARK BARK LIP HIP DIP LED

On mod 2 and higher elliptic genera

International Nuclear Information System (INIS)

Liu Kefeng

1992-01-01

In the first part of this paper, we construct mod 2 elliptic genera on manifolds of dimensions 8k+1, 8k+2 by mod 2 index formulas of Dirac operators. They are given by mod 2 modular forms or mod 2 automorphic functions. We also obtain an integral formula for the mod 2 index of the Dirac operator. As a by-product we find topological obstructions to group actions. In the second part, we construct higher elliptic genera and prove some of their rigidity properties under group actions. In the third part we write down characteristic series for all Witten genera by Jacobi theta-functions. The modular property and transformation formulas of elliptic genera then follow easily. We shall also prove that Krichever's genera, which come from integrable systems, can be written as indices of twisted Dirac operators for SU-manifolds. Some general discussions about elliptic genera are given. (orig.)

Surface characterization of graphene based materials

International Nuclear Information System (INIS)

Pisarek, M.; Holdynski, M.; Krawczyk, M.; Nowakowski, R.; Roguska, A.; Malolepszy, A.; Stobinski, L.; Jablonski, A.

2016-01-01

Highlights: • Two kind of samples: commercial graphene on Cu substrate and rGO flakes. • EPES applied to measure the IMFPs in graphene based materials. • Characterization by various techniques like: FE-SEM, AFM, XPS, AES and REELS. • EPES IMFPs for rGO deviated up to 14% from IMFPs calculated using the optical data. - Abstract: In the present study, two kind of samples were used: (i) a monolayer graphene film with a thickness of 0.345 nm deposited by the CVD method on Cu foil, (ii) graphene flakes obtained by modified Hummers method and followed by reduction of graphene oxide. The inelastic mean free path (IMFP), characterizing electron transport in graphene/Cu sample and reduced graphene oxide material, which determines the sampling depth of XPS and AES were evaluated from relative Elastic Peak Electron Spectroscopy (EPES) measurements with the Au standard in the energy range 0.5–2 keV. The measured IMFPs were compared with IMFPs resulting from experimental optical data published in the literature for the graphite sample. The EPES IMFP values at 0.5 and 1.5 keV was practically identical to that calculated from optical data for graphite (less than 4% deviation). For energies 1 and 2 keV, the EPES IMFPs for rGO were deviated up to 14% from IMFPs calculated using the optical data by Tanuma et al. [1]. Before EPES measurements all samples were characterized by various techniques like: FE-SEM, AFM, XPS, AES and REELS to visualize the surface morphology/topography and identify the chemical composition.

Surface characterization of graphene based materials

Energy Technology Data Exchange (ETDEWEB)

Pisarek, M., E-mail: mpisarek@ichf.edu.pl [Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw (Poland); Holdynski, M.; Krawczyk, M.; Nowakowski, R.; Roguska, A. [Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw (Poland); Malolepszy, A. [Faculty of Chemical and Process Engineering, Warsaw University of Technology, Warynskiego 1, 00-065 Warsaw (Poland); Stobinski, L. [Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw (Poland); Faculty of Chemical and Process Engineering, Warsaw University of Technology, Warynskiego 1, 00-065 Warsaw (Poland); Jablonski, A. [Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw (Poland)

2016-12-01

Highlights: • Two kind of samples: commercial graphene on Cu substrate and rGO flakes. • EPES applied to measure the IMFPs in graphene based materials. • Characterization by various techniques like: FE-SEM, AFM, XPS, AES and REELS. • EPES IMFPs for rGO deviated up to 14% from IMFPs calculated using the optical data. - Abstract: In the present study, two kind of samples were used: (i) a monolayer graphene film with a thickness of 0.345 nm deposited by the CVD method on Cu foil, (ii) graphene flakes obtained by modified Hummers method and followed by reduction of graphene oxide. The inelastic mean free path (IMFP), characterizing electron transport in graphene/Cu sample and reduced graphene oxide material, which determines the sampling depth of XPS and AES were evaluated from relative Elastic Peak Electron Spectroscopy (EPES) measurements with the Au standard in the energy range 0.5–2 keV. The measured IMFPs were compared with IMFPs resulting from experimental optical data published in the literature for the graphite sample. The EPES IMFP values at 0.5 and 1.5 keV was practically identical to that calculated from optical data for graphite (less than 4% deviation). For energies 1 and 2 keV, the EPES IMFPs for rGO were deviated up to 14% from IMFPs calculated using the optical data by Tanuma et al. [1]. Before EPES measurements all samples were characterized by various techniques like: FE-SEM, AFM, XPS, AES and REELS to visualize the surface morphology/topography and identify the chemical composition.

CFD simulation of copper(II) extraction with TFA in non-dispersive hollow fiber membrane contactors.

Science.gov (United States)

Muhammad, Amir; Younas, Mohammad; Rezakazemi, Mashallah

2018-04-01

This study presents computational fluid dynamics (CFD) simulation of dispersion-free liquid-liquid extraction of copper(II) with trifluoroacetylacetone (TFA) in hollow fiber membrane contactor (HFMC). Mass and momentum balance Navier-Stokes equations were coupled to address the transport of copper(II) solute across membrane contactor. Model equations were simulated using COMSOL Multiphysics™. The simulation was run to study the detailed concentration distribution of copper(II) and to investigate the effects of various parameters like membrane characteristics, partition coefficient, and flow configuration on extraction efficiency. Once-through extraction was found to be increased from 10 to 100% when partition coefficient was raised from 1 to 10. Similarly, the extraction efficiency was almost doubled when porosity to tortuosity ratio of membrane was increased from 0.05 to 0.81. Furthermore, the study revealed that CFD can be used as an effective optimization tool for the development of economical membrane-based dispersion-free extraction processes.

RELAP5/MOD2 code assessment

International Nuclear Information System (INIS)

Nithianandan, C.K.; Shah, N.H.; Schomaker, R.J.; Miller, F.R.

1985-01-01

Babcock and Wilcox (B and W) has been working with the code developers at EG and G and the US Nuclear Regulatory Commission in assessing the RELAP5/MOD2 computer code for the past year by simulating selected separate-effects tests. The purpose of this assessment has been to evaluate the code for use in MIST (Ref. 2) and OTIS integral system tests simulations and in the prediction of pressurized water reactor transients. B and W evaluated various versions of the code and made recommendations to improve code performance. As a result, the currently released version (cycle 36.1) has been improved considerably over earlier versions. However, further refinements to some of the constitutive models may still be needed to further improve the predictive capability of RELAP5/MOD2. The following versions of the code were evaluated. (1) RELAP/MOD2/Cycle 22 - first released version; (2) YELAP5/Cycle 32 - EG and G test version of RELAP5/MOD2/Cycle 32; (3) RELAP5/MOD2/Cycle 36 - frozen cycle for international code assessment; (4) updates to cycle 36 based on recommendations developed by B and W during the simulation of a Massachusetts Institute of Technology (MIT) pressurizer test; and (5) cycle 36.1 updates received from EG and G

RELAP5/MOD2 code assessment

Energy Technology Data Exchange (ETDEWEB)

Nithianandan, C.K.; Shah, N.H.; Schomaker, R.J.; Miller, F.R.

1985-11-01

Babcock and Wilcox (B and W) has been working with the code developers at EG and G and the US Nuclear Regulatory Commission in assessing the RELAP5/MOD2 computer code for the past year by simulating selected separate-effects tests. The purpose of this assessment has been to evaluate the code for use in MIST (Ref. 2) and OTIS integral system tests simulations and in the prediction of pressurized water reactor transients. B and W evaluated various versions of the code and made recommendations to improve code performance. As a result, the currently released version (cycle 36.1) has been improved considerably over earlier versions. However, further refinements to some of the constitutive models may still be needed to further improve the predictive capability of RELAP5/MOD2. The following versions of the code were evaluated. (1) RELAP/MOD2/Cycle 22 - first released version; (2) YELAP5/Cycle 32 - EG and G test version of RELAP5/MOD2/Cycle 32; (3) RELAP5/MOD2/Cycle 36 - frozen cycle for international code assessment; (4) updates to cycle 36 based on recommendations developed by B and W during the simulation of a Massachusetts Institute of Technology (MIT) pressurizer test; and (5) cycle 36.1 updates received from EG and G.

Numerical analysis of the influence of buffer layer thickness on the residual stresses in YBCO/La2Zr2O7/Ni superconducting materials

International Nuclear Information System (INIS)

Celik, Erdal; Sayman, Onur; Karakuzu, Ramazan; Ozman, Yilmaz

2007-01-01

The present paper addresses a numerical investigation of the influence of buffer layer thickness on the residual stress in YBCO/La 2 Zr 2 O 7 /Ni architectured materials under cryogenic conditions by using classical lamination theory (CLT) and finite element method (FEM) for coated conductor applications. YBCO/La 2 Zr 2 O 7 multilayer films were fabricated on Ni tape substrate using reel-to-reel sol-gel and pulse laser deposition (PLD) systems. The microstructural evolution of high temperature superconducting YBCO film and buffer layers with La 2 Zr 2 O 7 configuration grown on textured Ni tape substrates was investigated by using a scanning electron microscope (SEM). Thermal stress analysis of YBCO/La 2 Zr 2 O 7 /Ni multilayer sample was performed by using CLT in the temperature range of 298-175 K in liquid helium media. The YBCO/La 2 Zr 2 O 7 /Ni sample strip was solved by using FEM for linear or nonlinear cases in the temperature range of 298-3 K in liquid helium media. SEM observations revealed that crack-free, pinhole-free, continuous superconducting film and buffer layer were obtained by sol-gel and PLD systems. In addition to microstructural observations, it was found that the largest compressive stresses and failure occur in La 2 Zr 2 O 7 buffer layer due to its smallest thermal expansion coefficient. The thickness of La 2 Zr 2 O 7 buffer layer affects the failure. The stress component of σ x is the smallest in Ni tape substrate due to its largest thickness

Data management in NOAA

Science.gov (United States)

Callicott, William M.

1993-01-01

The NOAA archives contain 150 terabytes of data in digital form, most of which are the high volume GOES satellite image data. There are 630 data bases containing 2,350 environmental variables. There are 375 million film records and 90 million paper records in addition to the digital data base. The current data accession rate is 10 percent per year and the number of users are increasing at a 10 percent annual rate. NOAA publishes 5,000 publications and distributes over one million copies to almost 41,000 paying customers. Each year, over six million records are key entered from manuscript documents and about 13,000 computer tapes and 40,000 satellite hardcopy images are entered into the archive. Early digital data were stored on punched cards and open reel computer tapes. In the late seventies, an advanced helical scan technology (AMPEX TBM) was implemented. Now, punched cards have disappeared, the TBM system was abandoned, most data stored on open reel tapes have been migrated to 3480 cartridges, many specialized data sets were distributed on CD ROM's, special archives are being copied to 12 inch optical WORM disks, 5 1/4 inch magneto-optical disks were employed for workstation applications, and 8 mm EXABYTE tapes are planned for major data collection programs. The rapid expansion of new data sets, some of which constitute large volumes of data, coupled with the need for vastly improved access mechanisms, portability, and improved longevity are factors which will influence NOAA's future systems approaches for data management.

ModA and ModB, two ADP-ribosyltransferases encoded by bacteriophage T4: catalytic properties and mutation analysis.

Science.gov (United States)

Tiemann, Bernd; Depping, Reinhard; Gineikiene, Egle; Kaliniene, Laura; Nivinskas, Rimas; Rüger, Wolfgang

2004-11-01

Bacteriophage T4 encodes three ADP-ribosyltransferases, Alt, ModA, and ModB. These enzymes participate in the regulation of the T4 replication cycle by ADP-ribosylating a defined set of host proteins. In order to obtain a better understanding of the phage-host interactions and their consequences for regulating the T4 replication cycle, we studied cloning, overexpression, and characterization of purified ModA and ModB enzymes. Site-directed mutagenesis confirmed that amino acids, as deduced from secondary structure alignments, are indeed decisive for the activity of the enzymes, implying that the transfer reaction follows the Sn1-type reaction scheme proposed for this class of enzymes. In vitro transcription assays performed with Alt- and ModA-modified RNA polymerases demonstrated that the Alt-ribosylated polymerase enhances transcription from T4 early promoters on a T4 DNA template, whereas the transcriptional activity of ModA-modified polymerase, without the participation of T4-encoded auxiliary proteins for middle mode or late transcription, is reduced. The results presented here support the conclusion that ADP-ribosylation of RNA polymerase and of other host proteins allows initial phage-directed mRNA synthesis reactions to escape from host control. In contrast, subsequent modification of the other cellular target proteins limits transcription from phage early genes and participates in redirecting transcription to phage middle and late genes.

VHS-tape system for general purpose computer. For next generation mass storage system

International Nuclear Information System (INIS)

Ukai, K.; Takano, M.; Shinohara, M.; Niki, K.; Suzuki, Y.; Hamada, T.; Ogawa, M.

1994-07-01

Mass storage is one of the key technology of next generation computer system. A huge amount of data is produced on a field of particle and nuclear physics. These data are raw data of experiments, analysis data, Monte Carlo simulations data, etc. We search a storage device for these data at the point of view of capacity, price, size, transfer speed, etc. We have selected a VHS-tape (12.7 mm-tape, helical scan) from many storage devices. Characteristics of the VHS-tape are as follows; capacity of 14.5 GB, size of 460 cm 3 , price of 1,000 yen (S-VHS tape for video use), and 1.996 MB/sec transfer speed at a sustained mode. Last year, we succeeded to operate the VHS-tape system on a workstation as a I/O device with read/write speed of 1.5 MB/sec. We have tested a VHS-tape system by connecting to the channel of the general purpose computer (Fujitsu M-780/10S) in our institute. We obtained a read and write speeds of 1.07 MB/sec and 1.72 MB/sec by FORTRAN test programs, respectively. Read speeds of an open reel tape and a 3480 type cassete tape by the same test programs are 1.13 MB/sec and 2.54 MB/sec, respectively. Speeds of write operation are 1.09 MB/sec and 2.54 MB/sec for the open reel and 3480 cassete tape, respectively. A start motion of the VHS-tape for read/write operations needs about 60 seconds. (author)

Prototype high-speed tape target transport for a laser plasma soft-x-ray projection lithography source

International Nuclear Information System (INIS)

Haney, S.J.; Berger, K.W.; Kubiak, G.D.; Rockett, P.D.; Hunter, J.

1993-01-01

A prototype high-speed tape target transport is constructed for use in a high-repetition-rate laser plasma source. To reduce plasma debris, a 1000--5000-A-thick film of target material is supported by thin Mylar tape backing. Tape is transported to the laser focal volume at a maximum velocity of 356 cm/s, a rate sufficient to accommodate laser repetition rates of 1 kHz. The transport is fully vacuum compatible and can be retracted and then isolated from the laser plasma vacuum enclosure during tape reel replacement. The operating characteristics of the transport are described

Multiaxis, Lightweight, Computer-Controlled Exercise System

Science.gov (United States)

Haynes, Leonard; Bachrach, Benjamin; Harvey, William

2006-01-01

The multipurpose, multiaxial, isokinetic dynamometer (MMID) is a computer-controlled system of exercise machinery that can serve as a means for quantitatively assessing a subject s muscle coordination, range of motion, strength, and overall physical condition with respect to a wide variety of forces, motions, and exercise regimens. The MMID is easily reconfigurable and compactly stowable and, in comparison with prior computer-controlled exercise systems, it weighs less, costs less, and offers more capabilities. Whereas a typical prior isokinetic exercise machine is limited to operation in only one plane, the MMID can operate along any path. In addition, the MMID is not limited to the isokinetic (constant-speed) mode of operation. The MMID provides for control and/or measurement of position, force, and/or speed of exertion in as many as six degrees of freedom simultaneously; hence, it can accommodate more complex, more nearly natural combinations of motions and, in so doing, offers greater capabilities for physical conditioning and evaluation. The MMID (see figure) includes as many as eight active modules, each of which can be anchored to a floor, wall, ceiling, or other fixed object. A cable is payed out from a reel in each module to a bar or other suitable object that is gripped and manipulated by the subject. The reel is driven by a DC brushless motor or other suitable electric motor via a gear reduction unit. The motor can be made to function as either a driver or an electromagnetic brake, depending on the required nature of the interaction with the subject. The module includes a force and a displacement sensor for real-time monitoring of the tension in and displacement of the cable, respectively. In response to commands from a control computer, the motor can be operated to generate a required tension in the cable, to displace the cable a required distance, or to reel the cable in or out at a required speed. The computer can be programmed, either locally or via

Digitizing a sound archive

DEFF Research Database (Denmark)

Cone, Louise

2017-01-01

Danish and international artists. His methodology left us with a large collection of unique and inspirational time-based media sound artworks that have, until very recently, been inaccessible. Existing on an array of different media formats, such as open reel tapes, 8-track and 4 track cassettes, VHS......In 1990 an artist by the name of William Louis Sørensen was hired by the National Gallery of Denmark to collect important works of art – made from sound. His job was to acquire sound art, but also recordings that captured rare artistic occurrences, music, performances and happenings from both...

Cu(OAc)2/TFA-promoted formal [3 + 3] cycloaddition/oxidation of enamines and enones for synthesis of multisubstituted aromatic amines.

Science.gov (United States)

Li, Liang; Zhao, Mi-Na; Ren, Zhi-Hui; Li, Jian-Li; Guan, Zheng-Hui

2012-07-06

New strategies for the oxidative cycloaddition of enones with enamines are developed. These cycloaddition reactions directly afford substituted aromatic amines, which are important in organic chemistry, in moderate to good yield. Cu(OAc)(2)/TFA is shown to be essential to achieve high reaction efficiency.

Streaming movies, media, and instant access

CERN Document Server

Dixon, Wheeler Winston

2013-01-01

Film stocks are vanishing, but the iconic images of the silver screen remain -- albeit in new, sleeker formats. Today, viewers can instantly stream movies on televisions, computers, and smartphones. Gone are the days when films could only be seen in theaters or rented at video stores: movies are now accessible at the click of a button, and there are no reels, tapes, or discs to store. Any film or show worth keeping may be collected in the virtual cloud and accessed at will through services like Netflix, Hulu, and Amazon Instant.The movies have changed, and we are changing with them.

Post-test analysis of LOBI BT-01 using RELAP5/MOD2 and RELAP5/MOD3

International Nuclear Information System (INIS)

Holmes, B.J.

1991-08-01

LOBI is a high pressure, electrically heated integral system test facility simulating a KWU 1300 MW PWR scaled 1:712 by volume, although full scale has been maintained in the vertical direction. This report describes the results of an analysis of test BT-01, which simulates a 10% steam line break. The bulk of the analysis was performed using the Project Version of RELAP5/MOD2, with additional calculations using RELAP5/MOD3 for comparison. The codes provided generally good agreement with data. In particular, the break flows were well modelled, although the mass flow data proved to be unreliable, and this conclusion had to be derived from interpreting other signals. RELAP over-predicted primary/secondary heat transfer in the broken loop, however, leading to a more rapid cool-down of the primary circuit. Furthermore, the primary side pressure response was critically dependent upon the pressuriser behaviour, and the correct timing of the uncovery of the surge line. Inter-phase drag was not well predicted in the broken loop steam generator intermals, although some improvement was seen in the RELAP5/MOD3 predictions. MOD3 gave a reduction in primary/secondary heat transfer during the test pre-conditioning phase, resulting in a lower secondary side pressure at the start of the transient compared with MOD2. (author)

Design of the De-Orbit Sail Boom Deployment Unit

Science.gov (United States)

Meyer, Sebastian; Hillebrandt, Martin; Straubel, Marco; Huhne, Christian

2014-06-01

The design of the De-Orbit Sail boom deployment unit is strongly driven by volume constraints, which are given by the cubesat container. Four CFRP (carbon fiber reinforced polymer) booms [4] with a cross-sectional shape of a double-omega and a length of 3.6 m are reeled on one spool in the center of the unit. The deployment of the four booms are controlled by an electric motor, which acts on the boom spool. Due to the volume limitation caused by the dimensions of the cubesat deployer the deployment unit has little room for the mechanisms components. With the aim to achieve a robust design, the deployment concept of the unit has greatly changed during the development process. The history of the design as well as the mechanisms are described. Additionally the results of the flight model testing are presented.

MOD control center automated information systems security evolution

Science.gov (United States)

Owen, Rich

1991-01-01

The role of the technology infusion process in future Control Center Automated Information Systems (AIS) is highlighted. The following subject areas are presented in the form of the viewgraphs: goals, background, threat, MOD's AISS program, TQM, SDLC integration, payback, future challenges, and bottom line.

A modified MOD16 algorithm to estimate evapotranspiration over alpine meadow on the Tibetan Plateau, China

Science.gov (United States)

Chang, Y.; Ding, Y.; Zhao, Q.; Zhang, S.

2017-12-01

The accurate estimation of evapotranspiration (ET) is crucial for managing water resources in areas with extreme climates affected by climate change, such as the Tibetan Plateau (TP). The MOD16 ET product has also been validated and applied in many countries with various climates, however, its performance varies under different climates and regions. Several have studied ET based on satellite-based models on the TP. However, only a few studies on the performance of MOD16 in the TP with heterogeneous land cover have been reported. This study proposes an improved algorithm for estimating ET based on a proposed modified MOD16 method over alpine meadow on the TP in China. Wind speed and vegetation height were integrated to estimate aerodynamic resistance, while the temperature and moisture constraint for stomatal conductance were revised based on the technique proposed by Fisher et al. (2008). Moreover, Fisher's method for soil evaporation was introduced to decrease the uncertainty of soil evaporation estimation. Five representative alpine meadow sites on the TP were selected to investigate the performance of the modified algorithm. Comparisons between ET observed using Eddy Covariance (EC) and estimated using both the original method and modified method suggest that the modified algorithm had better performance than the original MOD16 method. This result was achieved considering that the coefficient of determination (R2) increased from 0.28 to 0.70, and the root mean square error (RMSE) decreased from 1.31 to 0.77 mm d-1. The modified algorithm also outperformed on precipitation days compared to non-precipitation days at Suli and Hulugou sites, while it performed well for both non-precipitation and precipitation days at Tanggula site. Comparisons of the 8-day ET estimation using the MOD16 product, original MOD16 method, and modified MOD16 method with observed ET suggest that MOD16 product underestimated ET over the alpine meadow of the TP during the growing season

TRAC-PF1/MOD2 status and plans

International Nuclear Information System (INIS)

Spore, J.W.; Steinke, R.G.; Nelson, R.A.; Cappiello, M.W.; Jenks, R.

1989-01-01

The development of the TRAC-PF1/MOD1 code was completed in July 1988 with the release of Version 14.4. A TRAC-PF1/MOD2 code development plan addresses code deficiencies identified in the MOD1 code in order to provide an accurate and defensible tool that can be used to simulate large-break loss-of-coolant accidents (LOCAs), small-break LOCAs, and operational transients. The MOD2 code development plan is an international cooperative effort that includes contributions from Los Alamos National Laboratory, Idaho National Engineering Laboratory (INEL), Japanese Atomic Energy Research Institute (JAERI), Cray Research, Central Electricity Generating Board (CEGB), and United Kingdom Atomic Energy Authority (UKAEA)

TFA'Expo Exhibition on the next low level radioactive wastes storage center Andra - Aube Center. January - june 2003

International Nuclear Information System (INIS)

2003-01-01

In order to inform the public on the nuclear installations, the Andra this document on the next storage Center of the Aube, for the low level radioactive wastes. The six parts present, the wastes characteristics, the wastes management, the choice of the site, the organization of the TFA (very low activity wastes), the environmental impacts and the economical impacts. (A.L.B.)

Assessment of ICARE/CATHARE V1mod1 and V1 applications to full scale studies

International Nuclear Information System (INIS)

Chatelard, P.; Barre, F.; Mutelle, H.

2001-01-01

The objective initially assigned to the ICARE/CATHARE V1mod1 validation task was to draw a synthesis of the ability of the code to correctly reproduce the main physical processes occurring during severe accidents. Therefore, both the domain in which the ICARE/CATHARE V1mod1 predictions are satisfactory (good confidence level) and, conversely, the identification of the main code deficiencies have to be highlighted. After a brief recall of the validation strategy and the current status of the work, this paper summarizes the main lessons which were drawn by IPSN from the validation activity which was conducted during the last two years (in 2000-2001) in the particular framework of the Users' Club (both IPSN and several foreign partners were involved in this task, under the management of IPSN). (authors)

Low eddy loss axial hybrid magnetic bearing with gimballing control ability for momentum flywheel

International Nuclear Information System (INIS)

Tang, Jiqiang; Sun, Jinji; Fang, Jiancheng; Shuzhi Sam, Ge

2013-01-01

For a magnetically suspended momentum flywheel (MSMF), the spinning rotor can be tilted by a pair of the presented axial hybrid magnetic bearing (AHMB) with eight poles and rotates around the radial axes to generate a large torque to maneuver the spacecraft. To improve the control performance and gimballing control ability of the AHMB, characteristics such as magnetic suspension force, angular stiffness and tilting momentum are researched. These segmented stator poles cause the magnetic density in the thrust rotor plate to be uneven unavoidably and the rotational loss is large at high speed, but we optimized the stator poles configuration and caused the thrust rotor plate formed by bulk DT4C and laminated material to make the magnetic density in the thrust rotor plate change less and be smoother. Laminated material such as 1J50 film with a thickness of 0.1 mm can make the variation of the magnetic density in DT4C become very small and the eddy loss of it be negligible, but the stress produced in the “O” shape stacks by reeling has a bad effect on its power loss. Nanocrystalline can reduce eddy losses and is not affected by the reeling process. Based on the AHBM consisting of the stator with eight improved poles and the presented thrust rotor plate with DT4 and nanocrystalline, the rotational loss of 5-DOF magnetically suspended momentum flywheel with angular momentum of 15 N m s at 5000 rpm has reduced from 23.4 W to 3.2 W, which proved that this AHMB has low eddy loss for the gimballing control ability. - Highlights: ► Control methods of rotor driven by AHMBs and their characteristics are researched. ► Optimized stator and rotor of AHMB reduce its eddy losses greatly. ► Presented the factors affecting the eddy losses of AHMBs. ► The good performances of AHMB with low eddy loss are proved by experiments.

CORCON-MOD1 modelling improvements

International Nuclear Information System (INIS)

Corradini, M.L.; Gonzales, F.G.; Vandervort, C.L.

1986-01-01

Given the unlikely occurrence of a severe accident in a light water reactor (LWR), the core may melt and slump into the reactor cavity below the reactor vessel. The interaction of the molten core with exposed concrete (a molten-core-concrete-interaction, MCCI) causes copious gas production which influences further heat transfer and concrete attack and may threaten containment integrity. In this paper the authors focus on the low-temperature phase of the MCCI where the molten pool is partially solidified, but is still capable of attacking concrete. The authors have developed some improved phenomenological models for pool freezing and molten core-coolant heat transfer and have incorporated them into the CORCON-MOD1 computer program. In the paper the authors compare the UW-CORCON/MOD1 calculations to CORCON/MOD2 and WECHSL results as well as the BETA experiments which are being conducted in Germany

NetMOD Version 2.0 User?s Manual.

Energy Technology Data Exchange (ETDEWEB)

Merchant, Bion J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-10-01

NetMOD ( Net work M onitoring for O ptimal D etection) is a Java-based software package for conducting simulation of seismic, hydracoustic, and infrasonic networks. Specifically, NetMOD simulates the detection capabilities of monitoring networks. Network simulations have long been used to study network resilience to station outages and to determine where additional stations are needed to reduce monitoring thresholds. NetMOD makes use of geophysical models to determine the source characteristics, signal attenuation along the path between the source and station, and the performance and noise properties of the station. These geophysical models are combined to simulate the relative amplitudes of signal and noise that are observed at each of the stations. From these signal-to-noise ratios (SNR), the probability of detection can be computed given a detection threshold. This manual describes how to configure and operate NetMOD to perform detection simulations. In addition, NetMOD is distributed with simulation datasets for the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO) International Monitoring System (IMS) seismic, hydroacoustic, and infrasonic networks for the purpose of demonstrating NetMOD's capabilities and providing user training. The tutorial sections of this manual use this dataset when describing how to perform the steps involved when running a simulation. ACKNOWLEDGEMENTS We would like to thank the reviewers of this document for their contributions.

Steady-state simulations of a 30-tube once-through steam generator with the RELAP5/MOD3 and RELAP5/MOD2 computer codes

International Nuclear Information System (INIS)

Hassan, Y.A.; Salim, P.

1991-01-01

This paper reports on a steady-state analysis of a 30-tube once-through steam generator that has been performed on the RELAPS/MOD3 and RELAPS/MOD2 computer codes for 100, 75, and 65% loads. Results obtained are compared with experimental data. The RELAP5/MOD3 results for the test facility generally agree reasonably well with the data for the primary-side temperature profiles. The secondary-side temperature profile predicted by RELAP5/MOD3 at 75 and 65% loads agrees fairly well with the data and is better than the RELAP5/MOD2 results. However, the RELAP5/MOD3 calculated secondary-side temperature profile does not compare well with the 100% load data

Alcator C-MOD proposal addendum

International Nuclear Information System (INIS)

Bonoli, P.; Greenwald, M.; Gwinn, D.

1986-04-01

Since the design concept and overall purpose of the Alcator C-MOD device are similar to that proposed in October 1985, we have chosen in this document only to highlight areas where changes or additions have been made. Chapters in the Addendum correspond to those in the Proposal, except Chapter 9 which describes a number of toroidal improvement concepts which are being considered for inclusion in the Alcator C-MOD experimental program. A description of the redesign and a discussion of the objectives of the experimental program are given

The Reel History of the World: Teaching World History with Major Motion Pictures

Science.gov (United States)

Russell, William Benedict, III

2012-01-01

In today's society, film is a part of popular culture and is relevant to students' everyday lives. Most students spend over 7 hours a day using media. With the popularity and availability of film, it is natural that teachers attempt to engage students with such a relevant medium. The method of using film and the method of using firsthand accounts…

Integrated uncertainty analysis using RELAP/SCDAPSIM/MOD4.0

International Nuclear Information System (INIS)

Perez, M.; Reventos, F.; Wagner, R.; Allison, C.

2009-01-01

The RELAP/SCDAPSIM/MOD4.0 code, designed to predict the behavior of reactor systems during normal and accident conditions, is being developed as part of an international nuclear technology Software Development and Training Program (SDTP). RELAP/SCDAPSIM/MOD4.0, which is the first version of RELAP5 completely rewritten to FORTRAN 90/95/2000 standards, uses the publicly available RELAP5 and SCDAP models in combination with (a) advanced programming and numerical techniques, (b) advanced SDTP-member-developed models for LWR, HWR, and research reactor analysis, and (c) a variety of other member-developed computational packages. One such computational package is an integrated uncertainty analysis package being developed jointly by the Technical University of Catalunya (UPC) and Innovative Systems Software (ISS). The integrated uncertainty analysis approach used in the package uses the following steps: 1. Selection of the plant; 2. Selection of the scenario; 3. Selection of the safety criteria; 4. Identification and ranking of the relevant phenomena based on the safety criteria; 5. Selection of the appropriate code parameters to represent those phenomena; 6. Association of uncertainty by means of Probability Distribution Functions (PDFs) for each selected parameter; 7. Random sampling of the selected parameters according to its PDF and performing multiple computer runs to obtain uncertainty bands with a certain percentile and confidence level; 8. Processing the results of the multiple computer runs to estimate the uncertainty bands for the computed quantities associated with the selected safety criteria. The first four steps are performed by the user prior to the RELAP/SCDAPSIM/MOD4.0 analysis. The remaining steps are included with the MOD4.0 integrated uncertainty analysis (IUA) package. This paper briefly describes the integrated uncertainty analysis package including (a) the features of the package, (b) the implementation of the package into RELAP/SCDAPSIM/MOD4.0, and

CAMAC data acquisition system for the pelletron

International Nuclear Information System (INIS)

Chatterjee, A.; Ghodgaonkar, M.D.; Khare, A.N.

1993-01-01

We have developed a CAMAC data acquisition system to meet the needs of a broad range of experiments at the pelletron. The system makes use of the DMA CAMAC crate controller CC3. The system is designed around two configurations. In the first, the crate controller is interfaced to an IBM PC/AT. The data are acquired on the PC Winchester disk. In the second configuration, the IBM PC is further linked to a HORIZON III mini-computer via ethernet. In this case list mode data can be taken directly on 1/2-inch reel tapes or 60MB cartridges. (author). 3 refs., 2 figs

Apo and ligand-bound structures of ModA from the archaeon Methanosarcina acetivorans

International Nuclear Information System (INIS)

Chan, Sum; Giuroiu, Iulia; Chernishof, Irina; Sawaya, Michael R.; Chiang, Janet; Gunsalus, Robert P.; Arbing, Mark A.; Perry, L. Jeanne

2010-01-01

Crystal structures of ModA from M. acetivorans in the apo and ligand-bound conformations confirm domain rotation upon ligand binding. The trace-element oxyanion molybdate, which is required for the growth of many bacterial and archaeal species, is transported into the cell by an ATP-binding cassette (ABC) transporter superfamily uptake system called ModABC. ModABC consists of the ModA periplasmic solute-binding protein, the integral membrane-transport protein ModB and the ATP-binding and hydrolysis cassette protein ModC. In this study, X-ray crystal structures of ModA from the archaeon Methanosarcina acetivorans (MaModA) have been determined in the apoprotein conformation at 1.95 and 1.69 Å resolution and in the molybdate-bound conformation at 2.25 and 2.45 Å resolution. The overall domain structure of MaModA is similar to other ModA proteins in that it has a bilobal structure in which two mixed α/β domains are linked by a hinge region. The apo MaModA is the first unliganded archaeal ModA structure to be determined: it exhibits a deep cleft between the two domains and confirms that upon binding ligand one domain is rotated towards the other by a hinge-bending motion, which is consistent with the ‘Venus flytrap’ model seen for bacterial-type periplasmic binding proteins. In contrast to the bacterial ModA structures, which have tetrahedral coordination of their metal substrates, molybdate-bound MaModA employs octahedral coordination of its substrate like other archaeal ModA proteins

Device for providing a leak-tight penetration for electric cables through a reactor vault roof

International Nuclear Information System (INIS)

Eyral, M.; Mahe, A.

1979-01-01

The device for providing a cable penetration through the vault roof of a liquid sodium cooled fast reactor comprises a vertical tube closed at the top end by a flange-plate. Electric cables connected to measuring and detecting instruments are passed through the flange-plate which is joined to the reactor vault roof in leak-tight manner and enclosed within a removable hood. At least one horizontal plate is mounted within the vertical tube and provided with orifices for the leak-tight passage of the cables. Cable storage reels are placed within the tube and can be locked in position or released by controlled mechanical means

Apo and ligand-bound structures of ModA from the archaeon Methanosarcina acetivorans.

Science.gov (United States)

Chan, Sum; Giuroiu, Iulia; Chernishof, Irina; Sawaya, Michael R; Chiang, Janet; Gunsalus, Robert P; Arbing, Mark A; Perry, L Jeanne

2010-03-01

The trace-element oxyanion molybdate, which is required for the growth of many bacterial and archaeal species, is transported into the cell by an ATP-binding cassette (ABC) transporter superfamily uptake system called ModABC. ModABC consists of the ModA periplasmic solute-binding protein, the integral membrane-transport protein ModB and the ATP-binding and hydrolysis cassette protein ModC. In this study, X-ray crystal structures of ModA from the archaeon Methanosarcina acetivorans (MaModA) have been determined in the apoprotein conformation at 1.95 and 1.69 A resolution and in the molybdate-bound conformation at 2.25 and 2.45 A resolution. The overall domain structure of MaModA is similar to other ModA proteins in that it has a bilobal structure in which two mixed alpha/beta domains are linked by a hinge region. The apo MaModA is the first unliganded archaeal ModA structure to be determined: it exhibits a deep cleft between the two domains and confirms that upon binding ligand one domain is rotated towards the other by a hinge-bending motion, which is consistent with the 'Venus flytrap' model seen for bacterial-type periplasmic binding proteins. In contrast to the bacterial ModA structures, which have tetrahedral coordination of their metal substrates, molybdate-bound MaModA employs octahedral coordination of its substrate like other archaeal ModA proteins.

NetMOD version 1.0 user's manual

Energy Technology Data Exchange (ETDEWEB)

Merchant, Bion John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2014-01-01

NetMOD (Network Monitoring for Optimal Detection) is a Java-based software package for conducting simulation of seismic networks. Specifically, NetMOD simulates the detection capabilities of seismic monitoring networks. Network simulations have long been used to study network resilience to station outages and to determine where additional stations are needed to reduce monitoring thresholds. NetMOD makes use of geophysical models to determine the source characteristics, signal attenuation along the path between the source and station, and the performance and noise properties of the station. These geophysical models are combined to simulate the relative amplitudes of signal and noise that are observed at each of the stations. From these signal-to-noise ratios (SNR), the probability of detection can be computed given a detection threshold. This manual describes how to configure and operate NetMOD to perform seismic detection simulations. In addition, NetMOD is distributed with a simulation dataset for the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO) International Monitoring System (IMS) seismic network for the purpose of demonstrating NetMOD's capabilities and providing user training. The tutorial sections of this manual use this dataset when describing how to perform the steps involved when running a simulation.

NetMOD Version 2.0 Parameters

Energy Technology Data Exchange (ETDEWEB)

Merchant, Bion J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-08-01

NetMOD ( Net work M onitoring for O ptimal D etection) is a Java-based software package for conducting simulation of seismic, hydroacoustic and infrasonic networks. Network simulations have long been used to study network resilience to station outages and to determine where additional stations are needed to reduce monitoring thresholds. NetMOD makes use of geophysical models to determine the source characteristics, signal attenuation along the path between the source and station, and the performance and noise properties of the station. These geophysical models are combined to simulate the relative amplitudes of signal and noise that are observed at each of the stations. From these signal-to-noise ratios (SNR), the probability of detection can be computed given a detection threshold. This document describes the parameters that are used to configure the NetMOD tool and the input and output parameters that make up the simulation definitions.

Current status and future prospects of Japanese national project on coated conductor development and its applications

Science.gov (United States)

Shiohara, Y.; Yoshizumi, M.; Izumi, T.; Yamada, Y.

2008-09-01

Four years of the current five-year national project since 2003 for development of coated conductors using Y-system superconductors have passed and lots of remarkable results have been achieved. In this paper, the current status and the future prospect of this project are reviewed. The current national project comprises several groups of national laboratories, universities and private companies. The group of high performance tape development, consisting of Fujikura and SRL-NCCC, has worked on the tape by PLD-REBCO superconducting tapes on the PLD-CeO 2/IBAD-GZO buffered substrates. The high product of Ic and L equal to 112,166 A m was achieved in the 368 m-304.8 A GdBCO tape whose Ic value is mostly above 350 A/cm-w. The performance under the magnetic fields was also improved up to 42 A at 3 T in a GdBCO short film with doping of ZrO 2. About 61 m long GdBCO tape with ZrO 2 doping showed a high Ic value of 220 A at self field and 30 A at 3 T. On the other hand, the other group focusing on the low production cost has worked on processes of TFA-MOD and MOCVD, etc. The extremely high Ic value of 735 A/cm-w was attained in the TFA-MOD films on PLD-CeO 2/IBAD-GZO/Hastelloy C276 substrate by means of using the effect of Ba-poor nominal composition. In the efforts for long tape production, 200 m long tapes with high Ic values of 200 A/cm-w and 205 A/cm-w were obtained by MOD-YBCO/PLD-CeO 2/IBAD-GZO/Hastelloy C276 and PLD-HoBCO on buffered NiW substrate, respectively. The Ic × L value of the MOD-derived tape was 40,000 A m, which is the highest value in the world by the MOD process. Based on the above achievements on the coated conductor process development, two new additional goals were set in the project. One is the development for the extremely low cost tape and another is the development of the basic technologies for making the electric power devices including cables, transformers, motors, current-limiters and cryocoolers. Some of the new themes already revealed the

Current status and future prospects of Japanese national project on coated conductor development and its applications

International Nuclear Information System (INIS)

Shiohara, Y.; Yoshizumi, M.; Izumi, T.; Yamada, Y.

2008-01-01

Four years of the current five-year national project since 2003 for development of coated conductors using Y-system superconductors have passed and lots of remarkable results have been achieved. In this paper, the current status and the future prospect of this project are reviewed. The current national project comprises several groups of national laboratories, universities and private companies. The group of high performance tape development, consisting of Fujikura and SRL-NCCC, has worked on the tape by PLD-REBCO superconducting tapes on the PLD-CeO 2 /IBAD-GZO buffered substrates. The high product of I c and L equal to 112,166 A m was achieved in the 368 m-304.8 A GdBCO tape whose I c value is mostly above 350 A/cm-w. The performance under the magnetic fields was also improved up to 42 A at 3 T in a GdBCO short film with doping of ZrO 2 . About 61 m long GdBCO tape with ZrO 2 doping showed a high I c value of 220 A at self field and 30 A at 3 T. On the other hand, the other group focusing on the low production cost has worked on processes of TFA-MOD and MOCVD, etc. The extremely high I c value of 735 A/cm-w was attained in the TFA-MOD films on PLD-CeO 2 /IBAD-GZO/Hastelloy C276 substrate by means of using the effect of Ba-poor nominal composition. In the efforts for long tape production, 200 m long tapes with high I c values of 200 A/cm-w and 205 A/cm-w were obtained by MOD-YBCO/PLD-CeO 2 /IBAD-GZO/Hastelloy C276 and PLD-HoBCO on buffered NiW substrate, respectively. The I c x L value of the MOD-derived tape was 40,000 A m, which is the highest value in the world by the MOD process. Based on the above achievements on the coated conductor process development, two new additional goals were set in the project. One is the development for the extremely low cost tape and another is the development of the basic technologies for making the electric power devices including cables, transformers, motors, current-limiters and cryocoolers. Some of the new themes already

Conceptual design of the 7 megawatt Mod-5B wind turbine generator

Science.gov (United States)

Douglas, R. R.

1982-01-01

Similar to MOD-2, the MOD-5B wind turbine generator system is designed for the sole purpose of providing electrical power for distribution by a major utility network. The objectives of the MOD-2 and MOD-5B programs are essentially identical with one important exception; the cost-of-electricity (COE) target is reduced from 4 cent/Kwhr on MOD-2 to 3 cent/Kwhr on MOD-5B, based on mid 1977 dollars and large quantity production. The MOD-5B concept studies and eventual concept selection confirmed that the program COE targets could not only be achieved but substantially bettered. Starting from the established MOD-2 technology as a base, this achievement resulted from a combination of concept changes, size changes, and design refinements. The result of this effort is a wind turbine system that can compete with conventional power generation over significant geographical areas, increasing commercial market potential by an order of magnitude.

An Optimization Scheme for ProdMod

International Nuclear Information System (INIS)

Gregory, M.V.

1999-01-01

A general purpose dynamic optimization scheme has been devised in conjunction with the ProdMod simulator. The optimization scheme is suitable for the Savannah River Site (SRS) High Level Waste (HLW) complex operations, and able to handle different types of optimizations such as linear, nonlinear, etc. The optimization is performed in the stand-alone FORTRAN based optimization deliver, while the optimizer is interfaced with the ProdMod simulator for flow of information between the two

Relap4/SAS/Mod5 - A version of Relap4/Mod 5 adapted to IPEN/CNEN - SP computer center

International Nuclear Information System (INIS)

Sabundjian, G.

1988-04-01

In order to improve the safety of nuclear reactor power plants several computer codes have been developed in the area of thermal - hydraulics accident analysis. Among the public-available codes, RELAP4, developed by Aerojet Nuclear Company, has been the most popular one. RELAP4 has produced satisfactory results when compared to most of the available experimental data. The purposes of the present work are: optimization of RELAP4 output and messages by writing there information in temporary records, - display of RELAP4 results in graphical form through the printer. The sample problem consists on a simplified model of a 150 MW (e) PWR whose primary circuit is simulated by 6 volumes, 8 junctions and 1 heat slab. This new version of RELAP4 (named RELAP4/SAS/MOD5) have produced results which show that the above mentioned purposes have been reached. Obviously the graphical output by RELAP4/SAS/MOD5 favors the interpretation of results by the user. (author) [pt

The alcator C-MOD control system

International Nuclear Information System (INIS)

Bosco, J.; Fairfax, S.

1992-01-01

The Alcator C-MOD experiment includes over 30 engineering and diagnostic subsystems. The control system hardware and software is a mixture of custom and commercial products which includes sensors, signal conditioners, hard-wired controls, programmable logic controllers, displays, a hybrid analog/digital computer, networked personal computers, and networked VAX workstations. This paper describes the computer-based portions of the control system. The control system coordinates all C-MOD systems including power, vacuum, heating and cooling, access control, plasma shape and position control, and diagnostics. Programmable logic controllers (PLC's) are located near each subsystem. The control room is isolated by fiber optics. Functions that are essential to personnel or equipment safety (e.g. access control) are implemented in hardwired logic and monitored but not controlled by the PLC's. The initial configuration will include over 25 Allen-Bradley PLC-5 units. The PLCs in each subsystem are connected to personal computers (PC's) in the control room. The PC's provide graphical displays and operator interface. The Pc's are networked and share process data with each other and with a master control console and a large mimic panel

Migration of alcator C-Mod computer infrastructure to Linux

International Nuclear Information System (INIS)

Fredian, T.W.; Greenwald, M.; Stillerman, J.A.

2004-01-01

The Alcator C-Mod fusion experiment at MIT in Cambridge, Massachusetts has been operating for twelve years. The data handling for the experiment during most of this period was based on MDSplus running on a cluster of VAX and Alpha computers using the OpenVMS operating system. While the OpenVMS operating system provided a stable reliable platform, the support of the operating system and the software layered on the system has deteriorated in recent years. With the advent of extremely powerful low cost personal computers and the increasing popularity and robustness of the Linux operating system a decision was made to migrate the data handling systems for C-Mod to a collection of PC's running Linux. This paper will describe the new system configuration, the effort involved in the migration from OpenVMS, the results of the first run campaign under the new configuration and the impact the switch may have on the rest of the MDSplus community

TFA'Expo Exhibition on the next low level radioactive wastes storage center Andra - Aube Center. January - june 2003; TFA'Expo exposition sur le futur Centre de stockage de dechets de tres faible activite Andra - Centre de l'Aube. Janvier - Juin 2003

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

In order to inform the public on the nuclear installations, the Andra this document on the next storage Center of the Aube, for the low level radioactive wastes. The six parts present, the wastes characteristics, the wastes management, the choice of the site, the organization of the TFA (very low activity wastes), the environmental impacts and the economical impacts. (A.L.B.)

Radon transport modelling: User's guide to RnMod3d

International Nuclear Information System (INIS)

Andersen, C.E.

2000-08-01

RnMod3d is a numerical computer model of soil-gas and radon transport in porous media. It can be used, for example, to study radon entry from soil into houses in response to indoor-outdoor pressure differences or changes in atmospheric pressure. It can also be used for flux calculations of radon from the soil surface or to model radon exhalation from building materials such as concrete. The finite-volume model is a technical research tool, and it cannot be used meaningfully without good understanding of the involved physical equations. Some understanding of numerical mathematics and the programming language Pascal is also required. Originally, the code was developed for internal use at Risoe only. With this guide, however, it should be possible for others to use the model. Three-dimensional steady-state or transient problems with Darcy flow of soil gas and combined generation, radioactive decay, diffusion and advection of radon can be solved. Moisture is included in the model, and partitioning of radon between air, water and soil grains (adsorption) is taken into account. Most parameters can change in time and space, and transport parameters (diffusivity and permeability) may be anisotropic. This guide includes benchmark tests based on simple problems with known solutions. RnMod3d has also been part of an international model intercomparison exercise based on more complicated problems without known solutions. All tests show that RnMod3d gives results of good quality. (au)

Gas jet disruption mitigation studies on Alcator C-Mod

International Nuclear Information System (INIS)

Granetz, R.; Whyte, D.G.; Izzo, V.A.; Biewer, T.; Reinke, M.L.; Terry, J.; Bader, A.; Bakhtiari, M.; Jernigan, T.; Wurden, G.

2006-01-01

Damaging effects of disruptions are a major concern for Alcator C-Mod, ITER and future tokamak reactors. High-pressure noble gas jet injection is a mitigation technique which potentially satisfies the operational requirements of fast response time and reliability, while still being benign to subsequent discharges. Disruption mitigation experiments using an optimized gas jet injection system are being carried out on Alcator C-Mod to study the physics of gas jet penetration into high pressure plasmas, as well as the ability of the gas jet impurities to convert plasma energy into radiation on timescales consistent with C-Mod's fast quench times, and to reduce halo currents given C-Mod's high-current density. The dependence of impurity penetration and effectiveness on noble gas species (He, Ne, Ar, Kr) is also being studied. It is found that the high-pressure neutral gas jet does not penetrate deeply into the C-Mod plasma, and yet prompt core thermal quenches are observed on all gas jet shots. 3D MHD modelling of the disruption physics with NIMROD shows that edge cooling of the plasma triggers fast growing tearing modes which rapidly produce a stochastic region in the core of the plasma and loss of thermal energy. This may explain the apparent effectiveness of the gas jet in C-Mod despite its limited penetration. The higher-Z gases (Ne, Ar, Kr) also proved effective at reducing halo currents and decreasing thermal deposition to the divertor surfaces. In addition, noble gas jet injection proved to be benign for plasma operation with C-Mod's metal (Mo) wall, actually improving the reliability of the startup in the following discharge

VARSKIN MOD 2 and SADDE MOD2: Computer codes for assessing skin dose from skin contamination

International Nuclear Information System (INIS)

Durham, J.S.

1992-12-01

The computer code VARSKIN has been modified to calculate dose to skin from three-dimensional sources, sources separated from the skin by layers of protective clothing, and gamma dose from certain radionuclides correction for backscatter has also been incorporated for certain geometries. This document describes the new code, VARSKIN Mod 2, including installation and operation instructions, provides detailed descriptions of the models used, and suggests methods for avoiding misuse of the code. The input data file for VARSKIN Mod 2 has been modified to reflect current physical data, to include the contribution to dose from internal conversion and Auger electrons, and to reflect a correction for low-energy electrons. In addition, the computer code SADDE: Scaled Absorbed Dose Distribution Evaluator has been modified to allow the generation of scaled absorbed dose distributions for mixtures of radionuclides and intereat conversion and Auger electrons. This new code, SADDE Mod 2, is also described in this document. Instructions for installation and operation of the code and detailed descriptions of the models used in the code are provided

UltraSail CubeSat Solar Sail Flight Experiment

Science.gov (United States)

Carroll, David; Burton, Rodney; Coverstone, Victoria; Swenson, Gary

2013-01-01

, while using solar photon pressure to slew the spin axis. Vacuum tests have also verified that electrostatic and molecular adhesion forces can substantially be eliminated by making the film electrically conductive, reducing the peel force of the film off the storage roll to levels of 100s of micro-N. The innovation demonstrated the capability of deploying a six-micron aluminum- coated film from a reel through a slit in vacuum. The innovation also demonstrated a spin-stabilized method for deploying a long reel of solar sail film using solar pressure to spin-up and orbit raise the satellite, and also a gravity gradient method for deploying a long reel of solar sail film using solar pressure to orbit raise the satellite. The solar sail mass fraction of 25% is consistent with high specific impulse ion systems, but without the added weight and cost of a power source and processing unit. The large sail area, coupled with low film density, is giving UltraSail a high payload fraction. The UltraSail deployment scheme unrolls a micrometerscale reflection-coated polyimide film from a storage mandrel to a maximum length of several kilometers with the aid of a blade tip satellite.

Repetitive DNA Reeling by the Cascade-Cas3 Complex in Nucleotide Unwinding Steps

NARCIS (Netherlands)

Loeff, Luuk; Brouns, Stan J.J.; Joo, Chirlmin

2018-01-01

CRISPR-Cas provides RNA-guided adaptive immunity against invading genetic elements. Interference in type I systems relies on the RNA-guided Cascade complex for target DNA recognition and the Cas3 helicase/nuclease protein for target degradation. Even though the biochemistry of CRISPR interference

Properties of the periplasmic ModA molybdate-binding protein of Escherichia coli.

Science.gov (United States)

Rech, S; Wolin, C; Gunsalus, R P

1996-02-02

The modABCD operon, located at 17 min on the Escherichia coli chromosome, encodes the protein components of a high affinity molybdate uptake system. Sequence analysis of the modA gene (GenBank L34009) predicts that it encodes a periplasmic binding protein based on the presence of a leader-like sequence at its N terminus. To examine the properties of the ModA protein, the modA structural gene was overexpressed, and its product was purified. The ModA protein was localized to the periplasmic space of the cell, and it was released following a gentle osmotic shock. The N-terminal sequence of ModA confirmed that a leader region of 24 amino acids was removed upon export from the cell. The apparent size of ModA is 31.6 kDa as determined by gel sieve chromatography, whereas it is 22.5 kDa when examined by SDS-polyacrylamide gel electrophoresis. A ligand-dependent protein mobility shift assay was devised using a native polyacrylamide gel electrophoresis protocol to examine binding of molybdate and other anions to the ModA periplasmic protein. Whereas molybdate and tungstate were bound with high affinity (approximately 5 microM), sulfate, chromate, selenate, phosphate, and chlorate did not bind even when tested at 2 mM. A UV spectral assay revealed apparent Kd values of binding for molybdate and tungstate of 3 and 7 microM, respectively. Strains defective in the modA gene were unable to transport molybdate unless high levels of the anion were supplied in the medium. Therefore the modA gene product is essential for high affinity molybdate uptake by the cell. Tungstate interference of molybdate acquisition by the cell is apparently due in part to the high affinity of the ModA protein for this anion.

Implementation of the thermal-hydraulic transient analysis code RELAP4/MOD5 and MOD6 on the FACOM 230/75 computer system

International Nuclear Information System (INIS)

Kohsaka, Atsuo; Ishigai, Takahiro; Kumakura, Toshimasa; Naraoka, Ken-itsu

1979-03-01

Development efforts have continued on the extensively used LOCA analysis code RELAP-4, as seen in its history; that is, from the prototype version MOD2 to the latest one MOD6 which is capable of one-through calculations from blowdown to reflood phase of PWR-LOCA. Many improvements and refinements of the models have enlarged the scopes and extents of phenomena to treat. Correspondingly the size of program has increased version to version, and special programming techniques have continuously been introduced to manage the program within limited capacity of core memory. For example, the Dynamic Storage Allocation of MOD5 and the PRELOAD Preprocessor newly incorporated in MOD6 are those designed for the CDC computer with relatively small core size. Described are these programming techniques in detail and experiences on implementation of the codes on FACOM 230/75, together with some results of confirmatory calculations. (author)

Bascule d'un modèle poutre à un modèle 3D en dynamique des machines tournantes

OpenAIRE

Tannous , Mikhael; Cartraud , Patrice; Dureisseix , David; Torkhani , Mohamed

2013-01-01

National audience; Les problèmes de machines tournantes incluant un contact rotor-stator, nécessitent un maillage 3D de la zone de contact. Cependant, un modèle 3D pour toute la durée de simulation conduit à des temps de calcul rédhibitoires. Or un modèle poutre est suffisant pour décrire la dynamique de la machine tournante hors contact. Une stratégie qui permet d'utiliser un modèle poutre et un autre 3D, pendant deux phases différentes durant la même simulation, permet donc de gagner en tem...

NetMOD Version 2.0 Mathematical Framework

Energy Technology Data Exchange (ETDEWEB)

Merchant, Bion J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Young, Christopher J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Chael, Eric P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-08-01

NetMOD ( Net work M onitoring for O ptimal D etection) is a Java-based software package for conducting simulation of seismic, hydroacoustic and infrasonic networks. Network simulations have long been used to study network resilience to station outages and to determine where additional stations are needed to reduce monitoring thresholds. NetMOD makes use of geophysical models to determine the source characteristics, signal attenuation along the path between the source and station, and the performance and noise properties of the station. These geophysical models are combined to simulate the relative amplitudes of signal and noise that are observed at each of the stations. From these signal-to-noise ratios (SNR), the probabilities of signal detection at each station and event detection across the network of stations can be computed given a detection threshold. The purpose of this document is to clearly and comprehensively present the mathematical framework used by NetMOD, the software package developed by Sandia National Laboratories to assess the monitoring capability of ground-based sensor networks. Many of the NetMOD equations used for simulations are inherited from the NetSim network capability assessment package developed in the late 1980s by SAIC (Sereno et al., 1990).

Morphological characterization of Mycobacterium tuberculosis in a MODS culture for an automatic diagnostics through pattern recognition.

Directory of Open Access Journals (Sweden)

Alicia Alva

Full Text Available Tuberculosis control efforts are hampered by a mismatch in diagnostic technology: modern optimal diagnostic tests are least available in poor areas where they are needed most. Lack of adequate early diagnostics and MDR detection is a critical problem in control efforts. The Microscopic Observation Drug Susceptibility (MODS assay uses visual recognition of cording patterns from Mycobacterium tuberculosis (MTB to diagnose tuberculosis infection and drug susceptibility directly from a sputum sample in 7-10 days with a low cost. An important limitation that laboratories in the developing world face in MODS implementation is the presence of permanent technical staff with expertise in reading MODS. We developed a pattern recognition algorithm to automatically interpret MODS results from digital images. The algorithm using image processing, feature extraction and pattern recognition determined geometrical and illumination features used in an object-model and a photo-model to classify TB-positive images. 765 MODS digital photos were processed. The single-object model identified MTB (96.9% sensitivity and 96.3% specificity and was able to discriminate non-tuberculous mycobacteria with a high specificity (97.1% M. avium, 99.1% M. chelonae, and 93.8% M. kansasii. The photo model identified TB-positive samples with 99.1% sensitivity and 99.7% specificity. This algorithm is a valuable tool that will enable automatic remote diagnosis using Internet or cellphone telephony. The use of this algorithm and its further implementation in a telediagnostics platform will contribute to both faster TB detection and MDR TB determination leading to an earlier initiation of appropriate treatment.

Oxidative C-H/C-H Cross-Coupling Reactions between N-Acylanilines and Benzamides Enabled by a Cp*-Free RhCl3/TFA Catalytic System.

Science.gov (United States)

You, Jingsong; Shi, Yang; Zhang, Luoqiang; Lan, Jingbo; Zhang, Min; Zhou, Fulin; Wei, Wenlong

2018-06-03

Using the dual chelation-assisted strategy, a completely regiocontrolled oxidative C-H/C-H cross-coupling reaction between an N-acylaniline and a benzamide has been accomplished for the first time, which enables a step-economical and highly efficient pathway to 2-amino-2'-carboxybiaryl scaffolds from readily available substrates. A Cp*-free RhCl3/TFA catalytic system has been developed to replace the generally used [Cp*RhCl2]2/AgSbF6 (Cp* = pentamethyl cyclopentadienyl) in oxidative C-H/C-H cross-coupling reactions between two (hetero)arenes. The RhCl3/TFA system avoids the use of expensive Cp* ligand and AgSbF6. As an illustrative example, the protocol developed herein greatly streamlines access to naturally occurring benzo[c]phenanthridine alkaloid oxynitidine in an excellent overall yield. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Mod 1 ICS TI Report: ICS Conversion of a 140% HPGe Detector

Energy Technology Data Exchange (ETDEWEB)

Bounds, John Alan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-07-05

This report evaluates the Mod 1 ICS, an electrically cooled 140% HPGe detector. It is a custom version of the ORTEC Integrated Cooling System (ICS) modified to make it more practical for us to use in the field. Performance and operating characteristics of the Mod 1 ICS are documented, noting both pros and cons. The Mod 1 ICS is deemed a success. Recommendations for a Mod 2 ICS, a true field prototype, are provided.

Internal examination of CAGR's

International Nuclear Information System (INIS)

Walton, P.J.; Langley, J.P.; Simons, C.R.; Hart, J.D.

1975-01-01

During selected reactor maintenance periods it will be necessary to conduct examinations of reactor internal components to gain assurance of their continuing integrity throughout the design life. Equipment for remote examination is being developed that will measure the distortions of the graphite moderator bricks and extract samples from them for analysis. Other remotely operated equipment will allow closed circuit TV viewing inside the reactors: the equipment provides both wide field and detailed inspection facilities within a single compact unit. Manipulators are being developed to ring the viewing units to the best vantage points. Reeling and handling gear will be operated from outside the vessels and these provide full containment at all times. (author)

Take-up device for incore instruments for nuclear power plant

International Nuclear Information System (INIS)

Watanabe, Shigeru.

1978-01-01

Purpose: To obtain a take-up device being capable of loading through the control rod inlet and operating with ease on a control rod exchange platform by detacheably mounting a reel-containing cask to a truck carrying a spool driving motor. Constitution: A take-up device is located while running a truck along guide rails from control rod inlet. A cask door is opened on a control rod exchange platform and a compression coupling tube is connected to the lower end of an instrument. Thereafter, a spool is rotated by a driving motor and a detection tube is taken up and wound into a spool through a take-up port. (Yoshino, Y.)

BP and Mobil present a united front in Europe

International Nuclear Information System (INIS)

Jackson, Kim.

1997-01-01

BP and Mobil announced the pooling of their European refining, marketing and lubricants businesses in February last year in an unprecedented step to cut costs and improve their competitive position in what is becoming an increasingly cut-throat market. Like their competitors, the two companies had been battling to contented with the continuing surplus refining capacity throughout Europe as well as significantly reduced profit margins on gasoline and other products sold at the pumps. This was particularly the case in the United Kingdom which is still reeling from the effects of the petrol pump price war waged over the past year and in France, too, where the hypermarkets are fiercely battling to retain their market share. (author)

Hot particle dose calculations using the computer code VARSKIN Mod 2

International Nuclear Information System (INIS)

Durham, J.S.

1991-01-01

The only calculational model recognised by the Nuclear Regulatory Commission (NRC) for hot particle dosimetry is VARSKIN Mod 1. Because the code was designed to calculate skin dose from distributed skin contamination and not hot particles, it is assumed that the particle has no thickness and, therefore, that no self-absorption occurs within the source material. For low energy beta particles such as those emitted from 60 Co, a significant amount of self-shielding occurs in hot particles and VARSKIN Mod 1 overestimates the skin dose. In addition, the presence of protective clothing, which will reduce the calculated skin dose for both high and low energy beta emitters, is not modelled in VARSKIN Mod 1. Finally, there is no provision in VARSKIN Mod 1 to calculate the gamma contribution to skin dose from radionuclides that emit both beta and gamma radiation. The computer code VARSKIN Mod 1 has been modified to model three-dimensional sources, insertion of layers of protective clothing between the source and skin, and gamma dose from appropriate radionuclides. The new code, VARSKIN Mod 2, is described and the sensitivity of the calculated dose to source geometry, diameter, thickness, density, and protective clothing thickness are discussed. Finally, doses calculated using VARSKIN Mod 2 are compared to doses measured from hot particles found in nuclear power plants. (author)

Assembly of cell-laden hydrogel fiber into non-liquefied and liquefied 3D spiral constructs by perfusion-based layer-by-layer technique

International Nuclear Information System (INIS)

Sher, Praveen; Oliveira, Sara M; Borges, João; Mano, João F

2015-01-01

In this work, three-dimensional (3D) self-sustaining, spiral-shaped constructs were produced through a combination of ionotropic gelation, to form cell-encapsulated alginate fibers, and a perfusion-based layer-by-layer (LbL) technique. Single fibers were assembled over cylindrical molds by reeling to form spiral shapes, both having different geometries and sizes. An uninterrupted nanometric multilayer coating produced by a perfusion-based LbL technique, using alginate and chitosan, generated stable 3D spiral-shaped macrostructures by gripping and affixing the threads together without using any crosslinking/binding agent. The chelation process altered the internal microenvironment of the 3D construct from the solid to the liquefied state while preserving the external geometry. L929 cell viability by MTS and dsDNA quantification favor liquefied 3D constructs more than non-liquefied ones. The proposed technique setup helps us to generate complex polyelectrolyte-based 3D constructs for tissue engineering applications and organ printing. (note)

Microscopic observation drug susceptibility assay (MODS for early diagnosis of tuberculosis in children.

Directory of Open Access Journals (Sweden)

Dang Thi Minh Ha

2009-12-01

Full Text Available MODS is a novel liquid culture based technique that has been shown to be effective and rapid for early diagnosis of tuberculosis (TB. We evaluated the MODS assay for diagnosis of TB in children in Viet Nam. 217 consecutive samples including sputum (n = 132, gastric fluid (n = 50, CSF (n = 32 and pleural fluid (n = 3 collected from 96 children with suspected TB, were tested by smear, MODS and MGIT. When test results were aggregated by patient, the sensitivity and specificity of smear, MGIT and MODS against "clinical diagnosis" (confirmed and probable groups as the gold standard were 28.2% and 100%, 42.3% and 100%, 39.7% and 94.4%, respectively. The sensitivity of MGIT and MODS was not significantly different in this analysis (P = 0.5, but MGIT was more sensitive than MODS when analysed on the sample level using a marginal model (P = 0.03. The median time to detection of MODS and MGIT were 8 days and 13 days, respectively, and the time to detection was significantly shorter for MODS in samples where both tests were positive (P<0.001. An analysis of time-dependent sensitivity showed that the detection rates were significantly higher for MODS than for MGIT by day 7 or day 14 (P<0.001 and P = 0.04, respectively. MODS is a rapid and sensitive alternative method for the isolation of M.tuberculosis from children.

NAUA Mod 4

International Nuclear Information System (INIS)

Bunz, H.; Koyro, M.; Schoeck, W.

1983-08-01

This report describes the computer program NAUA Mod4. Its purpose is to calculate the behaviour of a polydisperse aerosol system in a closed vessel containing a condensing atmosphere as a function of the time. The main object is to explain the physical background and to describe the structure of the code and the input and output in detail. (orig.) [de

Twenty Years of Research on the Alcator C-Mod Tokamak

Science.gov (United States)

Greenwald, Martin

2013-10-01

Alcator C-Mod is a compact, high-field tokamak, whose unique design and operating parameters have produced a wealth of new and important results since its start in 1993, contributing data that extended tests of critical physical models into new parameter ranges and into new regimes. Using only RF for heating and current drive with innovative launching structures, C-Mod operates routinely at very high power densities. Research highlights include direct experimental observation of ICRF mode-conversion, ICRF flow drive, demonstration of Lower-Hybrid current drive at ITER-like densities and fields and, using a set of powerful new diagnostics, extensive validation of advanced RF codes. C-Mod spearheaded the development of the vertical-target divertor and has always operated with high-Z metal plasma facing components--an approach adopted for ITER. C-Mod has made ground-breaking discoveries in divertor physics and plasma-material interactions at reactor-like power and particle fluxes and elucidated the critical role of cross-field transport in divertor operation, edge flows and the tokamak density limit. C-Mod developed the I-mode and EDA H-mode regimes which have high performance without large ELMs and with pedestal transport self-regulated by short-wavelength electromagnetic waves. C-Mod has carried out pioneering studies of intrinsic rotation and found that self-generated flow shear can be strong enough to significantly modify transport. C-Mod made the first quantitative link between pedestal temperature and H-mode performance, showing that the observed self-similar temperature profiles were consistent with critical-gradient-length theories and followed up with quantitative tests of nonlinear gyrokinetic models. Disruption studies on C-Mod provided the first observation of non-axisymmetric halo currents and non-axisymmetric radiation in mitigated disruptions. Work supported by U.S. DoE

Determination of Na, Mn and Cu in cocoon, raw silk and degummed silk by nondestructive activation analysis

Energy Technology Data Exchange (ETDEWEB)

Maki, Y; Ishiguro, Y [Industrial Research Inst. of Kanagawa Prefecture, Yokohama (Japan)

1976-01-01

The sodium, manganese and copper contained in cocoons, raw silk and degummed silk thread were determined by the nondestructive activation analysis. After each sample was irradiated with the thermal neutron flux of 5 x 10/sup 11/n/cm/sup 2/.sec, its ..gamma..-ray spectrum was measured with a NaI(Tl) detector. With the photoelectric peaks at 511 keV (/sup 64/Cu), 1368 keV (/sup 24/Na) and 847 keV (/sup 56/Mn), each element was quantitatively determined and its content was obtained. The measurement of the ..gamma..-ray spectra of samples with a Ge (Li) detector proved the presence of An, Sb, Fe, Zn, Cr, Sc, Co, etc. Large amounts of Na and Cu were detected in the sericin portion of cocoons, and the adhesion of Cu from a reeling-off machine to raw silk was also observed during the process of degumming cocoons to make raw silk.

Teaching Mods with Class

DEFF Research Database (Denmark)

Champion, Erik

2012-01-01

from around the world, representing fields as diverse as architecture, ethnography, puppetry, cultural studies, music education, interaction design and industrial design. How can we design, play with and reflect on the contribution of game mods, related tools and techniques, to both game studies...

Reel Science: An Ethnographic Study of Girls' Science Identity Development in and through Film

Science.gov (United States)

Chaffee, Rachel L.

2016-01-01

This dissertation study contributes to the research on filmmaking and identity development by exploring the ways that film production provided unique opportunities for a team of four girls to engage in science, to develop identities in science, and to see and understand science differently. Using social practice, identity, and feminist theory and…

20 years of research on the Alcator C-Mod tokamaka)

Science.gov (United States)

Greenwald, M.; Bader, A.; Baek, S.; Bakhtiari, M.; Barnard, H.; Beck, W.; Bergerson, W.; Bespamyatnov, I.; Bonoli, P.; Brower, D.; Brunner, D.; Burke, W.; Candy, J.; Churchill, M.; Cziegler, I.; Diallo, A.; Dominguez, A.; Duval, B.; Edlund, E.; Ennever, P.; Ernst, D.; Faust, I.; Fiore, C.; Fredian, T.; Garcia, O.; Gao, C.; Goetz, J.; Golfinopoulos, T.; Granetz, R.; Grulke, O.; Hartwig, Z.; Horne, S.; Howard, N.; Hubbard, A.; Hughes, J.; Hutchinson, I.; Irby, J.; Izzo, V.; Kessel, C.; LaBombard, B.; Lau, C.; Li, C.; Lin, Y.; Lipschultz, B.; Loarte, A.; Marmar, E.; Mazurenko, A.; McCracken, G.; McDermott, R.; Meneghini, O.; Mikkelsen, D.; Mossessian, D.; Mumgaard, R.; Myra, J.; Nelson-Melby, E.; Ochoukov, R.; Olynyk, G.; Parker, R.; Pitcher, S.; Podpaly, Y.; Porkolab, M.; Reinke, M.; Rice, J.; Rowan, W.; Schmidt, A.; Scott, S.; Shiraiwa, S.; Sierchio, J.; Smick, N.; Snipes, J. A.; Snyder, P.; Sorbom, B.; Stillerman, J.; Sung, C.; Takase, Y.; Tang, V.; Terry, J.; Terry, D.; Theiler, C.; Tronchin-James, A.; Tsujii, N.; Vieira, R.; Walk, J.; Wallace, G.; White, A.; Whyte, D.; Wilson, J.; Wolfe, S.; Wright, G.; Wright, J.; Wukitch, S.; Zweben, S.

2014-11-01

The object of this review is to summarize the achievements of research on the Alcator C-Mod tokamak [Hutchinson et al., Phys. Plasmas 1, 1511 (1994) and Marmar, Fusion Sci. Technol. 51, 261 (2007)] and to place that research in the context of the quest for practical fusion energy. C-Mod is a compact, high-field tokamak, whose unique design and operating parameters have produced a wealth of new and important results since it began operation in 1993, contributing data that extends tests of critical physical models into new parameter ranges and into new regimes. Using only high-power radio frequency (RF) waves for heating and current drive with innovative launching structures, C-Mod operates routinely at reactor level power densities and achieves plasma pressures higher than any other toroidal confinement device. C-Mod spearheaded the development of the vertical-target divertor and has always operated with high-Z metal plasma facing components—approaches subsequently adopted for ITER. C-Mod has made ground-breaking discoveries in divertor physics and plasma-material interactions at reactor-like power and particle fluxes and elucidated the critical role of cross-field transport in divertor operation, edge flows and the tokamak density limit. C-Mod developed the I-mode and the Enhanced Dα H-mode regimes, which have high performance without large edge localized modes and with pedestal transport self-regulated by short-wavelength electromagnetic waves. C-Mod has carried out pioneering studies of intrinsic rotation and demonstrated that self-generated flow shear can be strong enough in some cases to significantly modify transport. C-Mod made the first quantitative link between the pedestal temperature and the H-mode's performance, showing that the observed self-similar temperature profiles were consistent with critical-gradient-length theories and followed up with quantitative tests of nonlinear gyrokinetic models. RF research highlights include direct experimental

Reel Science: An Ethnographic Study of Girls' Science Identity Development In and Through Film

Science.gov (United States)

Chaffee, Rachel L.

This dissertation study contributes to the research on filmmaking and identity development by exploring the ways that film production provided unique opportunities for a team of four girls to engage in science, to develop identities in science, and to see and understand science differently. Using social practice, identity, and feminist theory and New Literacies Studies as a theoretical lens and grounded theory and multimodality as analytic frameworks, I present findings that suggest that girls in this study authored identities and communicated and represented science in and through film in ways that drew on their social, cultural, and embodied resources and the material resources of the after-school science club. Findings from this study highlight the affordances of filmmaking as a venue for engaging in the disciplinary practices of science and for accessing and authoring identities in science.

Extension of the lod score: the mod score.

Science.gov (United States)

Clerget-Darpoux, F

2001-01-01

In 1955 Morton proposed the lod score method both for testing linkage between loci and for estimating the recombination fraction between them. If a disease is controlled by a gene at one of these loci, the lod score computation requires the prior specification of an underlying model that assigns the probabilities of genotypes from the observed phenotypes. To address the case of linkage studies for diseases with unknown mode of inheritance, we suggested (Clerget-Darpoux et al., 1986) extending the lod score function to a so-called mod score function. In this function, the variables are both the recombination fraction and the disease model parameters. Maximizing the mod score function over all these parameters amounts to maximizing the probability of marker data conditional on the disease status. Under the absence of linkage, the mod score conforms to a chi-square distribution, with extra degrees of freedom in comparison to the lod score function (MacLean et al., 1993). The mod score is asymptotically maximum for the true disease model (Clerget-Darpoux and Bonaïti-Pellié, 1992; Hodge and Elston, 1994). Consequently, the power to detect linkage through mod score will be highest when the space of models where the maximization is performed includes the true model. On the other hand, one must avoid overparametrization of the model space. For example, when the approach is applied to affected sibpairs, only two constrained disease model parameters should be used (Knapp et al., 1994) for the mod score maximization. It is also important to emphasize the existence of a strong correlation between the disease gene location and the disease model. Consequently, there is poor resolution of the location of the susceptibility locus when the disease model at this locus is unknown. Of course, this is true regardless of the statistics used. The mod score may also be applied in a candidate gene strategy to model the potential effect of this gene in the disease. Since, however, it

Developmental assessment of RELAP5/MOD3 using the semiscale natural circulation tests

International Nuclear Information System (INIS)

Carlson, K.E.

1990-01-01

A code development effort creating RELAP5/MOD3 from RELAP5/MOD2 has been completed. Upon completion, a developmental assessment task was performed. One of the problems used for the developmental assessment was the Semiscale Natural Circulation Test. Calculated results from RELAP5/MOD3 are compared to measured data and previously calculated results from RELAP5/MOD2. 10 refs., 6 figs., 1 tab

Control of substrate oxidation in MOD ceramic coating on low-activation ferritic steel with reduced-pressure atmosphere

Energy Technology Data Exchange (ETDEWEB)

Tanaka, Teruya, E-mail: teru@nifs.ac.jp; Muroga, Takeo

2014-12-15

Highlights: • A Cr{sub 2}O{sub 3} layer was produced on a ferritic steel substrate with a reduced-pressure. • The Cr{sub 2}O{sub 3} layer prevents further substrate oxidation in following coating process. • The Cr{sub 2}O{sub 3} layer has a function as a hydrogen permeation barrier. • A smooth MOD Er{sub 2}O{sub 3} coating was successfully made on the Cr{sub 2}O{sub 3} layer by dip coating. • The Cr{sub 2}O{sub 3} layer would enhance flexibility in MOD coating process and performances. - Abstract: An Er{sub 2}O{sub 3} ceramic coating fabricated using the metal–organic decomposition (MOD) method on a Cr{sub 2}O{sub 3}-covered low-activation ferritic steel JLF-1 substrate was examined to improve hydrogen permeation barrier performance of the coating. The Cr{sub 2}O{sub 3} layer was obtained before coating by heat treating the substrate at 700 °C under reduced pressures of <5 × 10{sup −3} Pa and 5 Pa. The Cr{sub 2}O{sub 3} layer was significantly stable even with heat treatment at 700 °C in air. This layer prevented further production of Fe{sub 2}O{sub 3}, which has been considered to degrade coating performance. An MOD Er{sub 2}O{sub 3} coating with a smooth surface was successfully obtained on a Cr{sub 2}O{sub 3}-covered JLF-1 substrate by dip coating followed by drying and baking. Preprocessing to obtain a Cr{sub 2}O{sub 3} layer would provide flexibility in the coating process for blanket components and ducts. Moreover, the Cr{sub 2}O{sub 3} layer suppressed hydrogen permeation through the JLF-1 substrate. While further optimization of the coating fabrication process is required, it would be possible to suppress hydrogen permeation significantly by multilayers of Cr{sub 2}O{sub 3} and MOD oxide ceramic.

RELAP5/MOD3 AP600 problems

International Nuclear Information System (INIS)

Riemke, R.A.

1993-01-01

RELAP5/MOD3 is a reactor systems analysis code that has been developed jointly by the US Nuclear Regulatory Commission (USNRC) and a consortium consisting of several of the countries and domestic organizations that were members of the International Code Assessment and Applications Program (ICAP). The code is currently being used to simulate transients for the next generation of advanced light water reactors (ALWR's). One particular reactor design is the Westinghouse AP600 pressurized water reactor (PWR), which consists of two hot legs and four cold legs as well as passive emergency core cooling (ECC) systems. Initial calculations with RELAP5/MOD3 indicated that the code was not as robust as RELAP5/MOD2.5 with regard to AP600 calculations. Recent modifications in the areas of condensation wall heat transfer, interfacial heat transfer in the presence of noncondensibles, bubbly flow interfacial heat transfer, and time smoothing of both interfacial drag and interfacial heat transfer have improved the robustness, although more reliability is needed

Current status and future prospects of Japanese national project on coated conductor development and its applications

Energy Technology Data Exchange (ETDEWEB)

Shiohara, Y. [Superconductivity Research Laboratory, ISTEC, Shinonome 1-10-13, Koto-ku, Tokyo 135-0062 (Japan)], E-mail: shiohara@istec.or.jp; Yoshizumi, M.; Izumi, T. [Superconductivity Research Laboratory, ISTEC, Shinonome 1-10-13, Koto-ku, Tokyo 135-0062 (Japan); Yamada, Y. [Superconductivity Research Laboratory, ISTEC, Nagoya Coated Conductor Center, 2-4-1, Mutsuno, Atsuta-ku, Nagoya 456-8587 (Japan)

2008-09-15

Four years of the current five-year national project since 2003 for development of coated conductors using Y-system superconductors have passed and lots of remarkable results have been achieved. In this paper, the current status and the future prospect of this project are reviewed. The current national project comprises several groups of national laboratories, universities and private companies. The group of high performance tape development, consisting of Fujikura and SRL-NCCC, has worked on the tape by PLD-REBCO superconducting tapes on the PLD-CeO{sub 2}/IBAD-GZO buffered substrates. The high product of I{sub c} and L equal to 112,166 A m was achieved in the 368 m-304.8 A GdBCO tape whose I{sub c} value is mostly above 350 A/cm-w. The performance under the magnetic fields was also improved up to 42 A at 3 T in a GdBCO short film with doping of ZrO{sub 2}. About 61 m long GdBCO tape with ZrO{sub 2} doping showed a high I{sub c} value of 220 A at self field and 30 A at 3 T. On the other hand, the other group focusing on the low production cost has worked on processes of TFA-MOD and MOCVD, etc. The extremely high I{sub c} value of 735 A/cm-w was attained in the TFA-MOD films on PLD-CeO{sub 2}/IBAD-GZO/Hastelloy C276 substrate by means of using the effect of Ba-poor nominal composition. In the efforts for long tape production, 200 m long tapes with high I{sub c} values of 200 A/cm-w and 205 A/cm-w were obtained by MOD-YBCO/PLD-CeO{sub 2}/IBAD-GZO/Hastelloy C276 and PLD-HoBCO on buffered NiW substrate, respectively. The I{sub c} x L value of the MOD-derived tape was 40,000 A m, which is the highest value in the world by the MOD process. Based on the above achievements on the coated conductor process development, two new additional goals were set in the project. One is the development for the extremely low cost tape and another is the development of the basic technologies for making the electric power devices including cables, transformers, motors, current

20 years of research on the Alcator C-Mod tokamak

International Nuclear Information System (INIS)

Greenwald, M.; Baek, S.; Barnard, H.; Beck, W.; Bonoli, P.; Brunner, D.; Burke, W.; Ennever, P.; Ernst, D.; Faust, I.; Fiore, C.; Fredian, T.; Gao, C.; Golfinopoulos, T.; Granetz, R.; Hartwig, Z.; Hubbard, A.; Hughes, J.; Hutchinson, I.; Irby, J.

2014-01-01

The object of this review is to summarize the achievements of research on the Alcator C-Mod tokamak [Hutchinson et al., Phys. Plasmas 1, 1511 (1994) and Marmar, Fusion Sci. Technol. 51, 261 (2007)] and to place that research in the context of the quest for practical fusion energy. C-Mod is a compact, high-field tokamak, whose unique design and operating parameters have produced a wealth of new and important results since it began operation in 1993, contributing data that extends tests of critical physical models into new parameter ranges and into new regimes. Using only high-power radio frequency (RF) waves for heating and current drive with innovative launching structures, C-Mod operates routinely at reactor level power densities and achieves plasma pressures higher than any other toroidal confinement device. C-Mod spearheaded the development of the vertical-target divertor and has always operated with high-Z metal plasma facing components—approaches subsequently adopted for ITER. C-Mod has made ground-breaking discoveries in divertor physics and plasma-material interactions at reactor-like power and particle fluxes and elucidated the critical role of cross-field transport in divertor operation, edge flows and the tokamak density limit. C-Mod developed the I-mode and the Enhanced Dα H-mode regimes, which have high performance without large edge localized modes and with pedestal transport self-regulated by short-wavelength electromagnetic waves. C-Mod has carried out pioneering studies of intrinsic rotation and demonstrated that self-generated flow shear can be strong enough in some cases to significantly modify transport. C-Mod made the first quantitative link between the pedestal temperature and the H-mode's performance, showing that the observed self-similar temperature profiles were consistent with critical-gradient-length theories and followed up with quantitative tests of nonlinear gyrokinetic models. RF research highlights include direct experimental

Comparision of calculations for the ROSA-IV LSTF with RELAP5/MOD0 and RELAP5/MOD1 (cycle 1)

International Nuclear Information System (INIS)

Fineman, C.P.; Tanaka, Mitsugu; Tasaka, Kanji

1982-03-01

10% and 2.5% cold leg break analyses have been completed for the ROSA-IV Large Scale Test Facility (LSTF) with the RELAP5/MOD0 and RELAP5/MOD1, cycle 1, computer codes. Comparisons between the calculations were made to determine any differences in the results obtained from the two versions of RELAP5. Differences in the two calculations were found which can be attributed to changes in the flow regime maps and critical flow model. (author)

FRBRizing an E-Library : Migrating from Dublin Core to FRBR and MODS

Directory of Open Access Journals (Sweden)

Jeremy Nelson

2010-12-01

Full Text Available Western State College in Gunnison, Colorado developed an open-source eCataloger Framework, based on Dublin Core metadata, on Google's App Engine to manage and serve electronic resources to the library's patrons. Pressed to find new solutions for failing manual workflows for serials and government document resource management, the eCataloger Framework was extended to FRBR to automate and enhance serials management and government documents receiving. Based on successfully FRBRizing the eCataloger, Western State College converted their e-Library management from Dublin Core to FRBR and MODS. This paper examines the processes of each of these implementations using Python, AJAX, and jQuery, the details of the FRBR data model, including using FRBRoo, and the successful user interface supported by a FRBRized catalog.

Mening i arbejdslivet

DEFF Research Database (Denmark)

Ravn, Ib

2008-01-01

begrebet, hvorfor det defineres her: Et fænomen giver mening, når man indser, hvordan det indgår i en større sammenhæng. Mening i arbejdslivet gives da af oplevelsen af, at man gennem sit arbejde indgår i en større sammenhæng. En konceptualisering med fire delfaktorer udledes, der tilsammen skønnes at give...... mening i arbejdslivet: 1. Styrkerealisering: Den enkelte bruger sine styrker og talenter; 2. Værdiskabelse: Ens arbejdsplads skaber reel værdi og livskvalitet for kunder og brugere. 3. Bidrag: Man oplever at yde et vigtigt bidrag gennem sit arbejde. 4. Fællesskab: Man indgår i et produktivt fællesskab...

Characterization of the Hamamatsu 8" R5912-MOD Photomultiplier tube

Science.gov (United States)

Kaptanoglu, Tanner

2018-05-01

Current and future neutrino and direct detection dark matter experiments hope to take advantage of improving technologies in photon detection. Many of these detectors are large, monolithic optical detectors that use relatively low-cost, large-area, and efficient photomultiplier tubes (PMTs). A candidate PMT for future experiments is a newly developed prototype Hamamatsu PMT, the R5912-MOD. In this paper we describe measurements made of the single photoelectron time and charge response of the R5912-MOD, as well as detail some direct comparisons to similar PMTs. Most of these measurements were performed on three R5912-MOD PMTs operating at gains close to 1 × 107. The transit time spread (σ) and the charge peak-to-valley were measured to be on average 680ps and 4.2 respectively. The results of this paper show the R5912-MOD is an excellent candidate for future experiments in several regards, particularly due to its narrow spread in timing.

Progress on MOD/RABiTSTM 2G HTS wire

International Nuclear Information System (INIS)

Rupich, M.W.; Zhang, W.; Li, X.; Kodenkandath, T.; Verebelyi, D.T.; Schoop, U.; Thieme, C.; Teplitsky, M.; Lynch, J.; Nguyen, N.; Siegal, E.; Scudiere, J.; Maroni, V.; Venkataraman, K.; Miller, D.; Holesinger, T.G.

2004-01-01

The development of the second generation (2G) high temperature superconducting wire has advanced beyond initial laboratory demonstrations and is now focused on developing and testing high critical current conductor designs required for commercial applications. The approach pursued at American Superconductor for 2G wire manufacturing is based on the combination of the RABiTS TM substrate-buffer technology with metal organic deposition (MOD) of the YBCO layer. This MOD/RABiTS TM approach has been demonstrated in 10 m lengths with critical currents of up to 184 A/cm-width (∼2.3 MA/cm 2 ) and in short length with critical currents of up to 270 A/cm-width (∼3.4 MA/cm 2 ). In addition to a high critical current, the superconducting wire must also meet stringent mechanical and electrical stability requirements that vary by application. Commercially viable architectures designed to meet these specifications have been fabricated and tested. Wires manufactured by this process have been successfully tested in prototype cable and coil applications

Brazilian Irradiation Project: CAFE-MOD1 validation experimental program

International Nuclear Information System (INIS)

Mattos, Joao Roberto Loureiro de; Costa, Antonio Carlos L. da; Esteves, Fernando Avelar; Dias, Marcio Soares

1999-01-01

The Brazilian Irradiation Project whose purpose is to provide Brazil with a minimal structure to qualify the design, fabrication and quality procedures of nuclear fuels, consists of three main facilities: IEA-R1 reactor of IPEN-CNEN/SP, CAFE-MOD1 irradiation device and a unit of hot cells. The CAFE-MOD1 is based on concepts successfully used for more than 20 years in the main nuclear institutes around the world. Despite these concepts are already proved it should be adapted to each reactor condition. For this purpose, there is an ongoing experimental program aiming at the certification of the criteria and operational limits of the CAFE-MOD1 in order to get the allowance for its installation at the IEA-R1 reactor. (author)

Du teikei à l’AMAP, un modèle acculturé

Directory of Open Access Journals (Sweden)

Jean Lagane

2011-05-01

Full Text Available Cet article compare à travers deux ethnographies en France et au Japon le modèle français de l’AMAP – association de maintien de l’agriculture paysanne – au modèle dont il se réclame, le teikei, système japonais de partenariat agricole entre producteurs et consommateurs. Terrain en mutation permanente, le développement des formes de circuit court et leurs emprunts accentuent lors de la transposition la nécessité de coller le plus étroitement possible à la réalité du terrain, à son histoire sociétale, à ses traditions institutionnelles et culturelles, à ses crises, à ses dynamiques. L’analyse fait apparaître à travers les similitudes, dissemblances et adaptations de ce modèle d’emprunt, l’incidence et la complexité de la prise en compte de facteurs culturels.After two ethnological fieldworks completed in France and Japan, this article deals with the French system of Community Supported Agriculture - AMAP - and its Japanese inspiration counterpart, the Teikei system built upon local solidarity-based partnerships between farmers and members. Constantly evolving, the growing process of agriculture one-shot sale circuits and the way they are received in other cultures recalls the necessity to tune with the reality of these societies, their history, their institutional and cultural traditions as well as their crises and dynamics. The analysis emphasizes the complexity of the acculturation process related with points of convergence and discrepancy.

Assessment and improvement of condensation models in RELAP5/MOD3.2

Energy Technology Data Exchange (ETDEWEB)

Choi, Ki Yong; Park, Hyun Sik; Kim, Sang Jae; No, Hee Chen [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1998-12-31

The condensation models in the standard RELAP5/MOD3.2 code are assessed and improved based on the database, which is constructed from the previous experimental data on various condensation phenomena. The default model of the laminar film condensation in RELAP5/MOD3.2 does not give any reliable predictions, and its alternative model always predicts higher values than the experimental data. Therefore, it is needed to develop a new correlation based on the experimental data of various operating ranges in the constructed database. The Shah correlation, which is used to calculate the turbulent film condensation heat transfer coefficients in the standard RELAP5/MOD3.2, well predicts the experimental data in the database. The horizontally stratified condensation model of RELAP5/MOD3.2 overpredicts both cocurrent and countercurrent experimental data. The correlation proposed by H.J.Kim predicts the database relatively well compared with that of RELAP6/MOD3.2. The RELAP5/MOD3.2 model should use the liquid velocity for the calculation of the liquid Reynolds number and be modified to consider the effects of the gas velocity and the film thickness. 2 refs., 5 figs., 1 tab. (Author)

Assessment and improvement of condensation models in RELAP5/MOD3.2

Energy Technology Data Exchange (ETDEWEB)

Choi, Ki Yong; Park, Hyun Sik; Kim, Sang Jae; No, Hee Chen [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1997-12-31

The condensation models in the standard RELAP5/MOD3.2 code are assessed and improved based on the database, which is constructed from the previous experimental data on various condensation phenomena. The default model of the laminar film condensation in RELAP5/MOD3.2 does not give any reliable predictions, and its alternative model always predicts higher values than the experimental data. Therefore, it is needed to develop a new correlation based on the experimental data of various operating ranges in the constructed database. The Shah correlation, which is used to calculate the turbulent film condensation heat transfer coefficients in the standard RELAP5/MOD3.2, well predicts the experimental data in the database. The horizontally stratified condensation model of RELAP5/MOD3.2 overpredicts both cocurrent and countercurrent experimental data. The correlation proposed by H.J.Kim predicts the database relatively well compared with that of RELAP6/MOD3.2. The RELAP5/MOD3.2 model should use the liquid velocity for the calculation of the liquid Reynolds number and be modified to consider the effects of the gas velocity and the film thickness. 2 refs., 5 figs., 1 tab. (Author)

idRHa+ProMod - Rail Hardening Control System

International Nuclear Information System (INIS)

Ferro, L

2016-01-01

idRHa+ProMod is the process control system developed by Primetals Technologies to foresee the thermo-mechanical evolution and micro-structural composition of rail steels subjected to slack quenching into idRHa+ Rail Hardening equipments in a simulation environment. This tool can be used both off-line or in-line, giving the user the chance to test and study the best cooling strategies or letting the automatic control system free to adjust the proper cooling recipe. Optimization criteria have been tailored in order to determine the best cooling conditions according to the metallurgical requirements imposed by the main rail standards and also taking into account the elastoplastic bending phenomena occurring during all stages of the head hardening process. The computational core of idRHa+ProMod is a thermal finite element procedure coupled with special algorithms developed to work out the main thermo-physical properties of steel, to predict the non-isothermal austenite decomposition into all the relevant phases and subsequently to evaluate the amount of latent heat of transformation released, the compound thermal expansion coefficient and the amount of plastic deformation in the material. Air mist and air blades boundary conditions have been carefully investigated by means of pilot plant tests aimed to study the jet impingement on rail surfaces and the cooling efficiency at all working conditions. Heat transfer coefficients have been further checked and adjusted directly on field during commissioning. idRHa+ is a trademark of Primetals Technologies Italy Srl (paper)

idRHa+ProMod - Rail Hardening Control System

Science.gov (United States)

Ferro, L.

2016-03-01

idRHa+ProMod is the process control system developed by Primetals Technologies to foresee the thermo-mechanical evolution and micro-structural composition of rail steels subjected to slack quenching into idRHa+ Rail Hardening equipments in a simulation environment. This tool can be used both off-line or in-line, giving the user the chance to test and study the best cooling strategies or letting the automatic control system free to adjust the proper cooling recipe. Optimization criteria have been tailored in order to determine the best cooling conditions according to the metallurgical requirements imposed by the main rail standards and also taking into account the elastoplastic bending phenomena occurring during all stages of the head hardening process. The computational core of idRHa+ProMod is a thermal finite element procedure coupled with special algorithms developed to work out the main thermo-physical properties of steel, to predict the non-isothermal austenite decomposition into all the relevant phases and subsequently to evaluate the amount of latent heat of transformation released, the compound thermal expansion coefficient and the amount of plastic deformation in the material. Air mist and air blades boundary conditions have been carefully investigated by means of pilot plant tests aimed to study the jet impingement on rail surfaces and the cooling efficiency at all working conditions. Heat transfer coefficients have been further checked and adjusted directly on field during commissioning. idRHa+ is a trademark of Primetals Technologies Italy Srl

RELAP5/MOD2: for PWR transient analysis

International Nuclear Information System (INIS)

Ransom, V.H.

1983-01-01

RELAP5 is a light water reactor system transient simulation code for use in nuclear plant safety analysis. Development of a new version, RELAP5/MOD2, has been completed and will be released to the United States Nuclear Regulatory Commission during September of 1983. The new and improved modeling capability of RELAP5/MOD2 is described and some developmental assessment results are presented. The future plans for extension to severe accident modeling are briefly discussed

Mechanical measurements in RFX-mod experiment

Energy Technology Data Exchange (ETDEWEB)

Dalla Palma, M., E-mail: mauro.dallapalma@igi.cnr.it [Consorzio RFX, EURATOM-ENEA Association, Corso Stati Uniti 4, 35127 Padova (Italy); Ravarotto, D.; Dal Bello, S.; Fincato, M.; Ghiraldelli, R.; Marchiori, G.; Taliercio, C.; Zaccaria, P. [Consorzio RFX, EURATOM-ENEA Association, Corso Stati Uniti 4, 35127 Padova (Italy)

2010-12-15

The ongoing experimental campaigns of RFX-mod are performed setting operational parameters at the nominal or exceeding design values of the experiment. Compressive forces up to 11 MN are produced by high magnetizing currents that reach values up to 50 kA. These forces heavily load the mechanical structure of RFX-mod and their effects are measured and monitored in order to assess the expected structural response and machine reliability during operation. Mechanical strains and relative displacements are real time measured during each experimental pulse by 48 strain gauges located on 12 mechanical struts and 16 potentiometers positioned between the toroidal assembly and the support mechanical structure. The strains in the most stressed components are measured by means of 24 half bridge gauges preliminarily calibrated. Particular care has been given to sensor choices and installation in order to minimize signal noises induced by the electrical and magnetic fields. The residual noises have been further reduced by proper sampling frequency and averaging techniques. The strains measured on the struts are then post-processed to calculate the resultant forces and bending moments, while the displacement measurements give an estimate of the overall stiffness of the mechanical structure. The measured forces and displacements are shown per toroidal locations and as a function of the current intensity, so verifying the uniform sharing of forces among the different struts and the proper square law correlation with the magnetizing current intensity.

SCDAP/RELAP5/MOD3 code development and assessment

International Nuclear Information System (INIS)

Allison, C.M.; Heath, C.H.; Siefken, L.J.; Hohorst, J.K.

1991-01-01

The SCDAP/RELAP5/MOD3 computer code is designed to describe the overall reactor coolant system (RCS) thermal-hydraulic response, core damage progression, and fission product release and transport during severe accidents. The code is being developed at the Idaho National Engineering Laboratory (INEL) under the primary sponsorship of the Office of Nuclear Regulatory Research of the Nuclear Regulatory Commission (NRC). SCDAP/RELAP5/MOD3, created in January, 1991, is the result of merging RELAP5/MOD3 with SCDAP and TRAP-MELT models from SCDAP/RELAP5/MOD2.5. The RELAP5 models calculate the overall RCS thermal-hydraulics, control system interactions, reactor kinetics, and the transport of noncondensible gases, fission products, and aerosols. The SCDAP models calculate the damage progression in the core structures, the formation, heatup, and melting of debris, and the creep rupture failure of the lower head and other RCS structures. The TRAP-MELT models calculate the deposition of fission products upon aerosols or structural surfaces; the formation, growth, or deposition of aerosols; and the evaporation of species from surfaces. The systematic assessment of modeling uncertainties in SCDAP/RELAP5 code is currently underway. This assessment includes (a) the evaluation of code-to-data comparisons using stand-alone SCDAP and SCDAP/RELAP5/MOD3, (b) the estimation of modeling and experimental uncertainties, and (c) the determination of the influence of those uncertainties on predicted severe accident behavior

Wind turbine spoiler

Science.gov (United States)

Sullivan, W.N.

An aerodynamic spoiler system for a vertical axis wind turbine includes spoilers on the blades initially stored near the rotor axis to minimize drag. A solenoid latch adjacent the central support tower releases the spoilers and centrifugal force causes the spoilers to move up the turbine blades away from the rotor axis, thereby producing a braking effect and actual slowing of the associated wind turbine, if desired. The spoiler system can also be used as an infinitely variable power control by regulated movement of the spoilers on the blades over the range between the undeployed and fully deployed positions. This is done by the use of a suitable powered reel and cable located at the rotor tower to move the spoilers.

Thermal stability of carbon nanotubes probed by anchored tungsten nanoparticles

Directory of Open Access Journals (Sweden)

Xianlong Wei, Ming-Sheng Wang, Yoshio Bando and Dmitri Golberg

2011-01-01

Full Text Available The thermal stability of multiwalled carbon nanotubes (CNTs was studied in high vacuum using tungsten nanoparticles as miniaturized thermal probes. The particles were placed on CNTs inside a high-resolution transmission electron microscope equipped with a scanning tunneling microscope unit. The setup allowed manipulating individual nanoparticles and heating individual CNTs by applying current to them. CNTs were found to withstand high temperatures, up to the melting point of 60-nm-diameter W particles (~3400 K. The dynamics of W particles on a hot CNT, including particle crystallization, quasimelting, melting, sublimation and intradiffusion, were observed in real time and recorded as a video. Graphite layers reel off CNTs when melted or premelted W particles revolve along the tube axis.

Watershed Modeling Applications with the Open-Access Modular Distributed Watershed Educational Toolbox (MOD-WET) and Introductory Hydrology Textbook

Science.gov (United States)

Huning, L. S.; Margulis, S. A.

2014-12-01

Traditionally, introductory hydrology courses focus on hydrologic processes as independent or semi-independent concepts that are ultimately integrated into a watershed model near the end of the term. When an "off-the-shelf" watershed model is introduced in the curriculum, this approach can result in a potential disconnect between process-based hydrology and the inherent interconnectivity of processes within the water cycle. In order to curb this and reduce the learning curve associated with applying hydrologic concepts to complex real-world problems, we developed the open-access Modular Distributed Watershed Educational Toolbox (MOD-WET). The user-friendly, MATLAB-based toolbox contains the same physical equations for hydrological processes (i.e. precipitation, snow, radiation, evaporation, unsaturated flow, infiltration, groundwater, and runoff) that are presented in the companion e-textbook (http://aqua.seas.ucla.edu/margulis_intro_to_hydro_textbook.html) and taught in the classroom. The modular toolbox functions can be used by students to study individual hydrologic processes. These functions are integrated together to form a simple spatially-distributed watershed model, which reinforces a holistic understanding of how hydrologic processes are interconnected and modeled. Therefore when watershed modeling is introduced, students are already familiar with the fundamental building blocks that have been unified in the MOD-WET model. Extensive effort has been placed on the development of a highly modular and well-documented code that can be run on a personal computer within the commonly-used MATLAB environment. MOD-WET was designed to: 1) increase the qualitative and quantitative understanding of hydrological processes at the basin-scale and demonstrate how they vary with watershed properties, 2) emphasize applications of hydrologic concepts rather than computer programming, 3) elucidate the underlying physical processes that can often be obscured with a complicated

RELAP5/MOD2 calculation of OECD LOFT test LP-FW-01

International Nuclear Information System (INIS)

Croxfod, M.G.; Harwood, C.; Hall, P.C.

1992-04-01

RELAP5/MOD2 is being used by GDCD for calculation of certain small break loss-of-coolant accidents and pressurized transients in the Sizewell ''B'' PWR. To test the ability of RELAP5/MOD2 to model the primary feed-and-bleed recovery procedure following a complete loss- of-feedwater event, post test calculations have been carried out of OECD LOFT test LP-FW-01. This report describes the comparison between the code calculations and the test data. It is found that although the standard version of RELAP5/MOD2 gives a reasonable prediction of the experimental transient, the long term pressure history is better calculated with a modified code version containing a revised horizontal stratification entrainment model. The latter allows an improved calculation of entrainment of liquid from the hot leg into the surge line. RELAP5/MOD2 is found to give a more accurate simulation of the experimental transient than was achieved in previous UK studies using RETRAN-02/MOD2

Radon transport modelling: User's guide to RnMod3d

Energy Technology Data Exchange (ETDEWEB)

Andersen, C.E

2000-08-01

RnMod3d is a numerical computer model of soil-gas and radon transport in porous media. It can be used, for example, to study radon entry from soil into houses in response to indoor-outdoor pressure differences or changes in atmospheric pressure. It can also be used for flux calculations of radon from the soil surface or to model radon exhalation from building materials such as concrete. The finite-volume model is a technical research tool, and it cannot be used meaningfully without good understanding of the involved physical equations. Some understanding of numerical mathematics and the programming language Pascal is also required. Originally, the code was developed for internal use at Risoe only. With this guide, however, it should be possible for others to use the model. Three-dimensional steady-state or transient problems with Darcy flow of soil gas and combined generation, radioactive decay, diffusion and advection of radon can be solved. Moisture is included in the model, and partitioning of radon between air, water and soil grains (adsorption) is taken into account. Most parameters can change in time and space, and transport parameters (diffusivity and permeability) may be anisotropic. This guide includes benchmark tests based on simple problems with known solutions. RnMod3d has also been part of an international model intercomparison exercise based on more complicated problems without known solutions. All tests show that RnMod3d gives results of good quality. (au)

Københavns Kommunes indsats mod social dumping - målopfyldelsesevaluering

DEFF Research Database (Denmark)

Baadsgaard, Kelvin; Jørgensen, Henning

2016-01-01

Evaluering af, om de politiske intentioner med indsats mod social dumping i Københavns Kommune er blevet indfriet......Evaluering af, om de politiske intentioner med indsats mod social dumping i Københavns Kommune er blevet indfriet...

Warrior Burials and the Elevation of a Military Elite in LHIIIC Achaia

Directory of Open Access Journals (Sweden)

Senn, Heidi

2013-04-01

Full Text Available The collapse of Mycenaean civilization around 1200 B.C.E. left in its wake not only displaced and vulnerable settlements, but also a kind of ‘structural vacuum’ which forced populations to re-establish settlement patterns without the strict guidance of what had been a highly stratified and hierarchical authority under the Mycenaean palace centers. In a remote north-western region of ancient Hellas, the evidence of the so-called ‘warrior graves’ suggests that Achaian communities sought a decidedly military solution to the problems of re-organization and definition which confronted the reeling post-palatial population. In this article I will argue that the Achaian warriors, entombed so respectfully with the tools of their trade, were representative of a newly elevated military elite. *

High quality uniform YBCO film growth by the metalorganic deposition using trifluoroacetates

Energy Technology Data Exchange (ETDEWEB)

Wang, S.S., E-mail: wangssh@tsinghua.edu.cn [Key Laboratory of Micro-nano Measurement, Manipulation and Physics (Beihang University), Ministry of Education, Beijing 100191 (China); Beijing Dingchen Superconducting Technology Co., Ltd., Beijing 100084 (China); Zhang, Z.L. [Key Laboratory of Micro-nano Measurement, Manipulation and Physics (Beihang University), Ministry of Education, Beijing 100191 (China); Wang, L. [Applied superconductivity research center, Department of Physics, Tsinghua University, Beijing 100084 (China); Gao, L.K.; Liu, J. [Beijing Dingchen Superconducting Technology Co., Ltd., Beijing 100084 (China)

2017-03-15

Highlights: • High quality double-sided YBCO films are fabricated on LaAlO3 substrates by TFA-MOD method with diameters up to 2 in. • Large area YBCO films were very uniform in microstructure and thickness distribution, an average inductive Jc in excess of 6 MA/cm{sup 2} and low R{sub s} (10 GHz) of 0.3 mΩ at 77 K were obtained. • It will greatly promoted the research and applications of large-area YBCO films by chemical solution method. - Abstract: A need exists for the large-area superconducting YBa{sub 2}Cu{sub 3}O{sub 7-x} (YBCO) films with high critical current density for microwave communication and/or electric power applications. Trifluoroacetic metalorganic (TFA-MOD) method is a promising low cost technique for large-scale production of YBCO films, because it does not need high vacuum device and is easily applicable to substrates of various shape and size. In this paper, double-sided YBCO films with maximum 2 in diameter were prepared on LaAlO{sub 3} substrates by TFA-MOD method. Inductive critical current densitiy J{sub c}, microwave surface resistance R{sub s}, as well as the microstructure were characterized. A newly homemade furnace system was used to epitaxially grown YBCO films, which can improve the uniformity of YBCO film significantly by gas supply and temperature distribution proper design. Results showed that the large area YBCO films were very uniform in microstructure and thickness distribution, an average inductive J{sub c} in excess of 6 MA/cm{sup 2} with uniform distribution, and low R{sub s} (10 GHz) below 0.3 mΩ at 77 K were obtained. Andthe film filter may be prepared to work at temperatures lower than 74 K. These results are very close to the highest value of YBCO films made by conventional vacuum method, so we show a very promising route for large-scale production of high quality large-area YBCO superconducting films at a lower cost.

RELAP5/MOD2 assessment at Babcock and Wilcox

International Nuclear Information System (INIS)

Nithianandan, C.K.; Shah, N.H.; Schomaker, R.J.; Turk, C.

1986-01-01

Babcock and Wilcox (B and W) has been working with the code developers at EG and G Idaho, Inc. and the NRC assessing the RELAP5/MOD2 computer code by simulating selected separate effects tests. The purpose of this B and W Owners Group-sponsored assessment was to evaluate RELAP5/MOD2 for use in design calculations for the MIST and OTIS integral system tests and in predicting pressurized water reactor (PWR) transients. B and W evaluated various versions of the code and made recommendations to improve code performance. As a result, the currently released version (Cycle 36.1) has been improved considerably over earlier versions. However, further refinements to some of the constitutive models may still be needed to further improve specific predictive capabilities of RELAP5/MOD2

Edge plasma physics modifications due to magnetic ripple in RFX-mod

International Nuclear Information System (INIS)

Scarin, P.; Agostini, M.; Carraro, L.; Cavazzana, R.; Ciaccio, G.; De Masi, G.; Spizzo, G.; Spolaore, M.; Vianello, N.

2015-01-01

The edge of the RFX-mod (R = 2 m, a = 0.46 m) Reversed Field Pinch is characterized by weak magnetic chaos affecting ion and electron diffusion. Edge particle transport is strongly influenced by a toroidal asymmetry caused by magnetic islands. An ambipolar radial electric field ensures local neutrality and possesses the same symmetry as the parent magnetic ripple: the result is the modulation of the perpendicular flow, with a slowing-down at the island X-point. In this paper we present a complete statistical analysis, over a large database of RFX-mod discharges, of the edge properties as they are modified by the magnetic topology: the plasma wall footprint follows the helical shape of the dominant central mode (m/n = 1/7), with an increase of H α emission and electron density corresponding to the O-point of the inner magnetic island. Edge turbulence is modified by the magnetic topology, being generated in the O-point region and damped near the X-point

Expression, purification and DNA-binding activities of two putative ModE proteins of Herbaspirillum seropedicae (Burkholderiales, Oxalobacteraceae

Directory of Open Access Journals (Sweden)

André L.F. Souza

2008-01-01

Full Text Available In prokaryotes molybdenum is taken up by a high-affinity ABC-type transporter system encoded by the modABC genes. The endophyte β-Proteobacterium Herbaspirillum seropedicae has two modABC gene clusters and two genes encoding putative Mo-dependent regulator proteins (ModE1 and ModE2. Analysis of the amino acid sequence of the ModE1 protein of H. seropedicae revealed the presence of an N-terminal domain containing a DNA-binding helix-turn-helix motif (HTH and a C-terminal domain with a molybdate-binding motif. The second putative regulator protein, ModE2, contains only the helix-turn-helix motif, similar to that observed in some sequenced genomes. We cloned the modE1 (810 bp and modE2 (372 bp genes and expressed them in Escherichia coli as His-tagged fusion proteins, which we subsequently purified. The over-expressed recombinant His-ModE1 was insoluble and was purified after solubilization with urea and then on-column refolded during affinity chromatography. The His-ModE2 was expressed as a soluble protein and purified by affinity chromatography. These purified proteins were analyzed by DNA band-shift assays using the modA2 promoter region as probe. Our results indicate that His-ModE1 and His-ModE2 are able to bind to the modA2 promoter region, suggesting that both proteins may play a role in the regulation of molybdenum uptake and metabolism in H. seropedicae.

Plans and status of RELAP5/MOD3

International Nuclear Information System (INIS)

Weaver, W.L.

1989-01-01

RELAP5/MOD3 is a pressurized water reactor (PWR) system analysis code being developed jointly by the US Nuclear Regulatory Commission (USNRC) and consisting of several of the countries that are members of the International Code Assessment and Applications Program (ICAP). This code development program is called the ICAP Code Improvement Program. The mission of the RELAP5/MOD3 code improvement program is to develop a code version suitable for the analysis of all transients and postulated accidents in PER systems including both large and small break loss of coolant accidents (LOCA's) as well as the full range of operational transients. The emphasis of the RELAP5/MOD3 development will be on large break LOCA since previous versions of RELAP5 were developed for and assessed against small break LOCA and operation transient test data. The paper discusses the various code models to be improved and presents the results of work completed to date

RELAP5/MOD1-EUR evaluation. Comparison with the INEL original version

International Nuclear Information System (INIS)

Mazzantini, O.A.

1990-01-01

In this work, the values calculated from two versions of the RELAP5/MOD1 code are compared with those measured in different tests. The first version of RELAP5 is the cycle 19 of the original version of INEL (RELAP5/MOD1-INEL) and the second version improved by EURATOM (RELAP5/MOD1-EUR) which was transferred to ENACE through agreements made with SIEMENS/KWU. (Author) [es

Code development and analysis program. RELAP4/MOD7 (Version 2): user's manual

International Nuclear Information System (INIS)

1978-08-01

This manual describes RELAP4/MOD7 (Version 2), which is the latest version of the RELAP4 LPWR blowdown code. Version 2 is a precursor to the final version of RELAP4/MOD7, which will address LPWR LOCA analysis in integral fashion (i.e., blowdown, refill, and reflood in continuous fashion). This manual describes the new code models and provides application information required to utilize the code. It must be used in conjunction with the RELAP4/MOD5 User's Manual (ANCR-NUREG-1335, dated September 1976), and the RELAP4/MOD6 User's Manual

Automated energy conserving cover for refrigerated cabinet access openings

International Nuclear Information System (INIS)

Ibrahim, F.F.

1984-01-01

An automatically operated flexible barrier cover for the access openings of refrigerated display cabinets. The barrier cover limits the contact between the refrigerated air within the cabinet and the ambient air. The barrier cover can be moved over the access opening during non-customer use time periods when the retail food outlet is closed. The barrier cover can be arranged as a unitary assembly which can be manufactured and sold separately from the display cabinet as a retrofit device to effect energy savings. The flexible barrier cover can be stored in a reeled-up position or can be arranged as a folded flexible barrier which can be fanned out across the access opening. Various traction means are provided for moving the flexible barrier across the access opening

Vaccine mod halthed testes i besætning

DEFF Research Database (Denmark)

Lauritsen, Klara Tølbøll

2012-01-01

Ny vaccine mod ledbetændelse forårsaget af Mycoplasma hyosynoviae testes nu hos 200 svin i en problembesætning. Håbet er færre halte svin og en nedbringelse af antibiotikaforbruget.......Ny vaccine mod ledbetændelse forårsaget af Mycoplasma hyosynoviae testes nu hos 200 svin i en problembesætning. Håbet er færre halte svin og en nedbringelse af antibiotikaforbruget....

Mod two homology and cohomology

CERN Document Server

Hausmann, Jean-Claude

2014-01-01

Cohomology and homology modulo 2 helps the reader grasp more readily the basics of a major tool in algebraic topology. Compared to a more general approach to (co)homology this refreshing approach has many pedagogical advantages: It leads more quickly to the essentials of the subject, An absence of signs and orientation considerations simplifies the theory, Computations and advanced applications can be presented at an earlier stage, Simple geometrical interpretations of (co)chains. Mod 2 (co)homology was developed in the first quarter of the twentieth century as an alternative to integral homology, before both became particular cases of (co)homology with arbitrary coefficients. The first chapters of this book may serve as a basis for a graduate-level introductory course to (co)homology. Simplicial and singular mod 2 (co)homology are introduced, with their products and Steenrod squares, as well as equivariant cohomology. Classical applications include Brouwer's fixed point theorem, Poincaré duality, Borsuk-Ula...

DSN Beowulf Cluster-Based VLBI Correlator

Science.gov (United States)

Rogstad, Stephen P.; Jongeling, Andre P.; Finley, Susan G.; White, Leslie A.; Lanyi, Gabor E.; Clark, John E.; Goodhart, Charles E.

2009-01-01

used to delegate parallel tasks between nodes and storage areas (see Figure 2). This script forks into three processes: extract, translate, and correlate. Each of these processes iterates on available scan data and updates the status database as the work for each scan is completed. The extract process coordinates and monitors the transfer of data from each of the Mark5s to the Beowulf RAID storage systems. The translate process monitors and executes the data conversion processes on available scan files, and writes the translated files to the slave nodes. The correlate process monitors the execution of SoftC correlation processes on the slave nodes for scans that have completed translation. A comparison of the JVC and the legacy Block II correlator outputs reveals they are well within a formal error, and that the data are comparable with respect to their use in flight navigation. The processing speed of the JVC is improved over the Block II correlator by a factor of 4, largely due to the elimination of the reel-to-reel tape drives used in the Block II correlator.

Modding a free and open source software video game: "Play testing is hard work"

Directory of Open Access Journals (Sweden)

Giacomo Poderi

2014-03-01

Full Text Available Video game modding is a form of fan productivity in contemporary participatory culture. We see modding as an important way in which modders experience and conceptualize their work. By focusing on modding in a free and open source software video game, we analyze the practice of modding and the way it changes modders' relationship with their object of interest. The modders' involvement is not always associated with fun and creativity. Indeed, activities such as play testing often undermine these dimensions of modding. We present a case study of modding that is based on ethnographic research done for The Battle for Wesnoth, a free and open source software strategy video game entirely developed by a community of volunteers.

Ny vaccine mod ledbetændelse er ikke effektiv

DEFF Research Database (Denmark)

Nielsen, Elisabeth Okholm; Lauritsen, Klara Tølbøll

2013-01-01

En ny mulighed for at vaccinere mod mykoplasma-ledbetændelse er undersøgt hos en slagtesvineproducent. Vaccinen kunne desværre ikke forebygge halthed eff ektivt.......En ny mulighed for at vaccinere mod mykoplasma-ledbetændelse er undersøgt hos en slagtesvineproducent. Vaccinen kunne desværre ikke forebygge halthed eff ektivt....

Molybdate transporter ModABC is important for Pseudomonas aeruginosa chronic lung infection.

Science.gov (United States)

Périnet, Simone; Jeukens, Julie; Kukavica-Ibrulj, Irena; Ouellet, Myriam M; Charette, Steve J; Levesque, Roger C

2016-01-12

Mechanisms underlying the success of Pseudomonas aeruginosa in chronic lung infection among cystic fibrosis (CF) patients are poorly defined. The modA gene was previously linked to in vivo competitiveness of P. aeruginosa by a genetic screening in the rat lung. This gene encodes a subunit of transporter ModABC, which is responsible for extracellular uptake of molybdate. This compound is essential for molybdoenzymes, including nitrate reductases. Since anaerobic growth conditions are known to occur during CF chronic lung infection, inactivation of a molybdate transporter could inhibit proliferation through the inactivation of denitrification enzymes. Hence, we performed phenotypic characterization of a modA mutant strain obtained by signature-tagged mutagenesis (STM_modA) and assessed its virulence in vivo with two host models. The STM_modA mutant was in fact defective for anaerobic growth and unable to use nitrates in the growth medium for anaerobic respiration. Bacterial growth and nitrate usage were restored when the medium was supplemented with molybdate. Most significantly, the mutant strain showed reduced virulence compared to wild-type strain PAO1 according to a competitive index in the rat model of chronic lung infection and a predation assay with Dictyostelium discoideum amoebae. As the latter took place in aerobic conditions, the in vivo impact of the mutation in modA appears to extend beyond its effect on anaerobic growth. These results support the modABC-encoded transporter as important for the pathogenesis of P. aeruginosa, and suggest that enzymatic machinery implicated in anaerobic growth during chronic lung infection in CF merits further investigation as a potential target for therapeutic intervention.

The mod industries? The industrial logic of non-market game production

NARCIS (Netherlands)

Nieborg, D.B.; van der Graaf, S.

2008-01-01

This article seeks to make the relationship between non-market game developers (modders) and the game developer company explicit through game technology. It investigates a particular type of modding, i.e. total conversion mod teams, whose organization can be said to conform to the high-risk,

RELOS.MOD2: a code system for the determination of instationary fission product releases from molten pools

International Nuclear Information System (INIS)

Kortz, Ch.; Koch, M.K.; Unger, H.; Funke, F.

1999-01-01

For the assessment of molten corium pool source terms, a mechanistic model has been developed to describe the transport of fission products from liquid corium pool surfaces into a colder gas atmosphere. Modelling is based on an approach for diffusive and convective transport processes coupled with thermochemical equilibrium considerations enabling detailed speciation analyses of the fission products released. Both have been implemented into the code system RELOS.MOD2. RELOS.MOD2 sensitivity calculations on possible effects of anticipated uncertainties in the thermo-chemical data on the fission product release predictions are presented. (author)

Development and application of STCP Mod 1.1

International Nuclear Information System (INIS)

Hu Zhiyi

1990-01-01

A state-of-the-art Source Term Code Package-STCP Mod 1.1 is used for assessing the release of radioactive materials to the environment in severe reactor accidents. Its structure and function, and its installation and development on CYBER computer in China are introduced. Through calculations and analyses for 4 selected severe accident sequences from ZION Nuclear Power Plant of the U.S., it shows that the developed STCP Mod 1.1 is suitable to calculate varios scenarios as long as the selections of the model and parameters are reasonable

RELAP5/MOD2 code modifications to obtain better predictions for the once-through steam generator

International Nuclear Information System (INIS)

Blanchat, T.; Hassan, Y.

1989-01-01

The steam generator is a major component in pressurized water reactors. Predicting the response of a steam generator during both steady-state and transient conditions is essential in studying the thermal-hydraulic behavior of a nuclear reactor coolant system. Therefore, many analytical and experimental efforts have been performed to investigate the thermal-hydraulic behavior of the steam generators during operational and accident transients. The objective of this study is to predict the behavior of the secondary side of the once-through steam generator (OTSG) using the RELAP5/MOD2 computer code. Steady-state conditions were predicted with the current version of the RELAP5/MOD2 code and compared with experimental plant data. The code predictions consistently underpredict the degree of superheat. A new interface friction model has been implemented in a modified version of RELAP5/MOD2. This modification, along with changes to the flow regime transition criteria and the heat transfer correlations, correctly predicts the degree of superheat and matches plant data

Nonaxisymmetric field effects on Alcator C-Mod

International Nuclear Information System (INIS)

Wolfe, S.M.; Hutchinson, I.H.; Granetz, R.S.; Rice, J.; Hubbard, A.; Lynn, A.; Phillips, P.; Hender, T.C.; Howell, D.F.; La Haye, R.J.; Scoville, J.T.

2005-01-01

A set of external coils (A-coils) capable of producing nonaxisymmetric, predominantly n=1, fields with different toroidal phase and a range of poloidal mode m spectra has been used to determine the threshold amplitude for mode locking over a range of plasma parameters in Alcator C-Mod [I. H. Hutchinson, R. Boivin, F. Bombarda, P. Bonoli, S. Fairfax, C. Fiore, J. Goetz, S. Golovato, R. Granetz, M. Greenwald et al., Phys. Plasmas 1, 1511 (1994)]. The threshold perturbations and parametric scalings, expressed in terms of (B 21 /B T ), are similar to those observed on larger, lower field devices. The threshold is roughly linear in density, with typical magnitudes of order 10 -4 . This result implies that locked modes should not be significantly more problematic for the International Thermonuclear Experimental Reactor [I. P. B. Editors, Nucl. Fusion 39, 2286 (1999)] than for existing devices. Coordinated nondimensional identity experiments on the Joint European Torus [Fusion Technol. 11, 13 (1987)], DIII-D [Fusion Technol. 8, 441 (1985)], and C-Mod, with matching applied mode spectra, have been carried out to determine more definitively the field and size scalings. Locked modes on C-Mod are observed to result in braking of core toroidal rotation, modification of sawtooth activity, and significant reduction in energy and particle confinement, frequently leading to disruptions. Intrinsic error fields inferred from the threshold studies are found to be consistent in amplitude and phase with a comprehensive model of the sources of field errors based on 'as-built' coil and bus-work details and coil imperfections inferred from measurements using in situ magnetic diagnostics on dedicated test pulses. Use of the A-coils to largely cancel the 2/1 component of the intrinsic nonaxisymmetric field has led to expansion of the accessible operating space in C-Mod, including operation up to 2 MA plasma current at 8 T

Reel Royal Diversity? The Glass Ceiling in Disney’s Mulan and Princess and the Frog

Directory of Open Access Journals (Sweden)

Lauren Dundes

2016-12-01

Full Text Available Both in Mulan and Princess and the Frog, Disney eschews a traditional fairytale ending involving palatial opulence by substituting an alternative narrative for women of color. Mulan disguises herself as a male soldier in order to serve in her father’s place. After sharing victory with male companions, she willingly returns home to domesticity and the confines imposed by her gender. Tiana spends two thirds of the movie as a frog, substantially limiting her on-screen time as an African American female. Like Mulan, she is driven to please her father. She fulfills his dream of owning a high-end restaurant, ironically named Tiana’s Palace, the closest she comes to a royal lifestyle. Although protagonists with more realistic lives could potentially enhance viewers’ connection with them and model a work ethic or commitment to home life, the standard and more financially successful Disney narrative immerses viewers in a fantasy world of endless prospects including a life of royalty. These nonwhite heroines instead display a willingness to settle for more modest aspirations in stories replete with stereotypical gender and race-bound tropes. This divergent narrative suggests that protagonists of color are not entitled to a life of leisure and privilege that white Disney princesses enjoy.

Evaluation and assessment of reflooding models in RELAP5/Mod2.5 and RELAP5/Mod3 codes using Lehigh University and PSI-Neptun bundle experimental data

Energy Technology Data Exchange (ETDEWEB)

Sencar, M.; Aksan, N. [Paul Scherrer Institute, Villigen (Switzerland)

1995-09-01

An extensive analysis and assessment work on reflooding models of RELAP5/Mod2.5 and, RELAP5/Mod3/v5m5 and RELAP/Mod3/v7j have been performed. Experimental data from LehighUniversityv. and PSI-NEPTUN bundle reflooding experiments have been used for the assessment, since both of these tests cover a broad range of initial conditions. Within the range of these initial conditions, it was tried to identify their separate impacts on the calculated results. A total of six Lehigh University reflooding bundle tests and two PSI-NEPTUN tests with bounding initial conditions are selected for the analysis. Detailed nodalisation studies both for hydraulic and conduction heat transfer were done. On the basis of the results obtained from these cases, a base nodalisation scheme was established. All the other analysis work was performed by using this base nodalisation. RELAP5/Mod2.5 results do not change with renodalisation but RELAP5/Mod3 results are more sensitive to renodalisation. The results of RELAP5/Mod2.5 versions show very large deviations from the used experimental data. These results indicate that some of the phenomenology of the events occurring during the reflooding could not be identified. In the paper, detailed discussions on the main reasons of the deviations from the experimental data will be presented. Since, the results and findings of this study are meant to be a developmental aid, some recommendations have been drawn and some of these have already been implemented at PSI with promising results.

Using computer program RELAP5/MOD2 on microcomputers

International Nuclear Information System (INIS)

Grgic, D.; Bajs, T; Cavlina, N.; Debrecin, N.

1990-01-01

Our work on installation of RELAP5/MOD2 code on IBM4341, mVAX 11, MGT-386 and COMPAQ-386/20e computers is described. Main characteristics of RELAP5/MOD2 structure programming style and differences between FORTRAN VS, VAX-11 FORTRAN and NDP FORTRAN 386 are presented. We discussed basic philosophy used in modification and testing and test results. (author)

Alcator C-MOD final safety analysis

International Nuclear Information System (INIS)

Fiore, C.L.

1989-06-01

This document is designed to address the safety issues involved with the Alcator C-Mod project. This report will begin with a brief description of the experimental objectives which will be followed by information concerning the site. The Alcator C-Mod experiment is a pulsed fusion experiment in which a plasma formed from small amounts of hydrogen or deuterium gas is confined in a magnetic field for short periods (∼1 s). No radioactive fuels or fissile materials are used in the device, so that no criticality hazard exists and no credible nuclear accident can occur. During deuterium operation, the production of a small number of neutrons from a short pulse could result in a small amount of short- and intermediate-lived radioactive isotopes being produced inside the experimental cell. This report will demonstrate that this does not pose an additional hazard to the general population. The health and safety hazards resulting from Alcator C-Mod occur to the workers on the experiment, each of which is described in its own chapter with the steps taken to minimize the risk to employees. These hazards include fire, chemicals and cryogenics, air quality, electrical, electromagnetic radiation, ionizing radiation, and mechanical and natural phenomena. None of these hazards is unique to the facility, and methods of protection from them are well defined and are discussed in the chapter which describes each hazard. The quality assurance program, critical to ensuring the safety aspects of the program, will also be described

KONVENCIJE MOD O PRISILNEM DELU V LUČI DANAŠNJEGA ČASA

OpenAIRE

Kokoravec, Mateja

2015-01-01

Prisilno delo je antiteza dostojnega dela, za katerega se zavzema MOD. Za 21 milijonov ljudi to ni samo bled spomin iz preteklosti, ampak težka realnost še danes. Mednarodni delovni standardi, ki jih oblikuje MOD, predstavljajo temeljne minimalne socialne standarde, dogovorjene s strani glavnih udeležencev v svetovnem gospodarstvu. Z njimi si MOD prizadeva doseči dostojne delovne pogoje, saj je v današnjem svetu globalizacije za doseganje teh ciljev potrebno ukrepanje na mednarodni ravni. ...

Development of sorbent therapy for multiple organ dysfunction syndrome (MODS)

International Nuclear Information System (INIS)

Li Li; Pan Jilun; Yu Yaoting

2007-01-01

As a syndrome, multiple organ dysfunction (MODS) is defined as an altered organ function in the setting of sepsis, septic shock or systemic inflammatory response syndrome (SIRS) and is the most common cause of death in intensive care units. Endotoxin, a constituent of cell walls of Gram-negative bacteria, plays an important role in the initiation and development of MODS. The cytokines, especially tumor necrosis factor alpha (TNF-alpha), are early regulators of the immune response and can induce the release of secondary cytokines. To remove endotoxin and TNF-alpha from patients with MODS, the adsorption method has proven to be most effective. In this review, we provide various methods of removal of endotoxins and TNF-alpha using different adsorbents. (topical review)

A Note on Accounting Education in Vocational Schools and Its Quality

Directory of Open Access Journals (Sweden)

Fehmi Karasioğlu

2011-06-01

Full Text Available Accounting is a way to shows the right ways that relates to the past in a healthy, complete and giving the right information and at the same time is a true thing to plan for the future and give effective decision. In other words while giving the information related to accounting it is also to get the reel decisions, to take the risk and confirm the opportunities which will show the ways in the future. To fulfill all these functions successfully those who assimilate “accounting business” are the ones who get a good education on accounting. It is true that the quality of education is related to many factors. To increase the quality in education, these factors should be confirmed, the reel economy demand should be considered and educational, students and the surrounding should be developed by technical learning. The development of a model in the accounting education during the four semesters that the students will get; moreover, the instructors should have the required information, skills and responsibilities on this issue. The educational model which has been established on computer environment by a program should be followed by a business or working on issues will lead. The education model / teaching and learning the model, the assessment of the exercise being open all the time and the performances of the teachers and the students should be estimated by the authorities. Additionally, the model being open on “company based on practice” and to make it compatible in the market it should include “work simulation”. Finally, the students who will study accounting, business administration ect. in the departments at vocational school and the ones who accept it as a job should have a “career consultant” system to be settled and it should be operated actively. By this way the students will be able to reach to success by being guided and to keep the motivation alive in their future goals

The LHCD Launcher for Alcator C-Mod - Design, Construction, Calibration and Testing

International Nuclear Information System (INIS)

Hosea, J.; Beals, D.; Beck, W.; Bernabei, S.; Burke, W.; Childs, R.; Ellis, R.; Fredd, E.; Greenough, N.; Grimes, M.; Gwinn, D.; Irby, J.; Jurczynski, S.; Koert, P.; Kung, C.C.; Loesser, G.D.; Marmar, E.; Parker, R.; Rushinski, J.; Schilling, G.; Terry, D.; Vieira, R.; Wilson, J.R.; Zaks, J.

2005-01-01

MIT and PPPL have joined together to fabricate a high-power lower hybrid current drive (LHCD) system for supporting steady-state AT regime research on Alcator C-Mod. The goal of the first step of this project is to provide 1.5 MW of 4.6 GHz rf [radio frequency] power to the plasma with a compact launcher which has excellent spectral selectivity and fits into a single C-Mod port. Some of the important design, construction, calibration and testing considerations for the launcher leading up to its installation on C-Mod are presented here

MOD-5A wind turbine generator program design report: Volume 1: Executive Summary

Science.gov (United States)

1984-01-01

The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator covering work performed between July 1980 and June 1984 is discussed. The report is divided into four volumes: Volume 1 summarizes the entire MOD-5A program, Volume 2 discusses the conceptual and preliminary design phases, Volume 3 describes the final design of the MOD-5A, and Volume 4 contains the drawings and specifications developed for the final design. Volume 1, the Executive Summary, summarizes all phases of the MOD-5A program. The performance and cost of energy generated by the MOD-5A are presented. Each subsystem - the rotor, drivetrain, nacelle, tower and foundation, power generation, and control and instrumentation subsystems - is described briefly. The early phases of the MOD-5A program, during which the design was analyzed and optimized, and new technologies and materials were developed, are discussed. Manufacturing, quality assurance, and safety plans are presented. The volume concludes with an index of volumes 2 and 3.

Indium/TFA-catalyzed synthesis of tetracyclic [6,5,5,6] indole ring, via a tandem cycloannulation of β-oxodithioester with tryptamine.

Science.gov (United States)

Singh, Thokchom Prasanta; Bhattarcharya, Suman; Singh, Okram Mukherjee

2013-04-19

The cycloannulation of β-oxodithioesters and tryptamine in dichloromethane in the presence of a catalytic amount of InCl3 and TFA gave the novel 5-aryl/heteroaryl 2a(1),9b-dihydro-1H-2a,5a-diaza-cyclopenta[jk]fluorene-3(2H)-thiones in moderate to good yields. The reaction was proposed to involve a tandem transformation of thioamide, protonation, and dehydrative cyclization. KMnO4-oxidation of these newly prepared compounds yielded oxidative desulfurization products in good yields.

Sur la modélisation des supraconducteurs : le ``modèle de l'état critique'' de Bean, en trois dimensions

Science.gov (United States)

Bossavit, A.

1993-03-01

Macroscopic modelling of superconductors demands a substitution of some nonlinear behavior law for Ohm's law. For this, a version of Bean's “critical state” model, derived from the setting of a convex functional of the current density field, valid in dimension 3 without any previous assumption about the direction of currents, is proposed. It is shown how two standard three-dimensional finite element methods (“h-formulation” and “e-formulation”), once fitted with this model, can deal with situations were superconductors are present. La modélisation macroscopique des supraconducteurs suppose le remplacement de la loi d'Ohm par une loi de comportement non linéaire adéquate. On présente à cet effet une version du “modèle de Bean”, ou modèle de l'état critique, basée sur la construction d'une certaine fonctionnelle convexe du champ des densités de courant, qui est valable en dimension 3 sans hypothèses préalables sur la direction des courants. On montre comment adapter deux méthodes standards de calcul de courants de Foucault par élérnents finis en trois dimensions (“en h” et “en e”) à la présence de supraconducteurs, en incorporant ce modèle.

SCDAP/RELAP5/MOD3 code development

International Nuclear Information System (INIS)

Allison, C.M.; Siefken, J.L.; Coryell, E.W.

1992-01-01

The SCOAP/RELAP5/MOD3 computer code is designed to describe the overall reactor coolant system (RCS) thermal-hydraulic response, core damage progression, and fission product release and transport during severe accidents. The code is being developed at the Idaho National Engineering Laboratory (INEL) under the primary sponsorship of the Office of Nuclear Regulatory Research of the US Nuclear Regulatory Commission (NRC). Code development activities are currently focused on three main areas - (a) code usability, (b) early phase melt progression model improvements, and (c) advanced reactor thermal-hydraulic model extensions. This paper describes the first two activities. A companion paper describes the advanced reactor model improvements being performed under RELAP5/MOD3 funding

Abstracts of digital computer code packages. Assembled by the Radiation Shielding Information Center

International Nuclear Information System (INIS)

McGill, B.; Maskewitz, B.F.; Anthony, C.M.; Comolander, H.E.; Hendrickson, H.R.

1976-01-01

The term ''code package'' is used to describe a miscellaneous grouping of materials which, when interpreted in connection with a digital computer, enables the scientist--user to solve technical problems in the area for which the material was designed. In general, a ''code package'' consists of written material--reports, instructions, flow charts, listings of data, and other useful material and IBM card decks (or, more often, a reel of magnetic tape) on which the source decks, sample problem input (including libraries of data) and the BCD/EBCDIC output listing from the sample problem are written. In addition to the main code, and any available auxiliary routines are also included. The abstract format was chosen to give to a potential code user several criteria for deciding whether or not he wishes to request the code package

Use of moving heat conductor mesh to perform reflood calculations with RELAP4/MOD6

International Nuclear Information System (INIS)

Fischer, S.R.; Ellis, L.V.; Chen, Y.S.

1979-01-01

RELAP4 is a computer code which can be used for the transient thermal hydraulic analysis of light water reactors and related systems. RELAP4/MOD6 includes many new analytical models which were developed primarily for the analysis of the reflood phase of a PWR loss-of-coolant accident (LOCA) transient. The key feature forming the basis for the MOD6 reflood calculation is a unique moving finite differenced heat conductor. The development and application of the moving heat conductor mesh for use in reflood analysis are described

Water levels in wells J-11 and J-12, 1989-91, Yucca Mountain Area, Nevada

International Nuclear Information System (INIS)

Boucher, M.S.

1994-01-01

Water levels have been measured in the Yucca Mountain area, Nevada, since 1981 in order to gain a better understanding of the ground-water flow system in the area. Water levels in wells J-11 and J-12 have been periodically measured using calibrated reeled steel tapes since 1989, however, calculation of water-level altitude was not possible prior to 1993 due to missing reference elevations. These elevations were determined in 1993 by the U.S. Geological Survey. During 1989-91, water-level altitudes for well J-11 ranged from 732.09 to 732.40 meters and the mean water-level altitude was 732.19 meters. During 1989-91, water-level altitudes for well J-12 ranged from 727.84 to 728.03 meters, and the mean water-level altitude was 727.95 meters

Control of substrate oxidation in MOD cerawwwmic coating on low-activation ferritic steel with reduced-pressure atmosphere

Science.gov (United States)

Tanaka, Teruya; Muroga, Takeo

2014-12-01

An Er2O3 ceramic coating fabricated using the metal-organic decomposition (MOD) method on a Cr2O3-covered low-activation ferritic steel JLF-1 substrate was examined to improve hydrogen permeation barrier performance of the coating. The Cr2O3 layer was obtained before coating by heat treating the substrate at 700 °C under reduced pressures of baking. Preprocessing to obtain a Cr2O3 layer would provide flexibility in the coating process for blanket components and ducts. Moreover, the Cr2O3 layer suppressed hydrogen permeation through the JLF-1 substrate. While further optimization of the coating fabrication process is required, it would be possible to suppress hydrogen permeation significantly by multilayers of Cr2O3 and MOD oxide ceramic.

Identification of Bacillus thuringiensis Cry1AbMod binding-proteins from Spodoptera frugiperda.

Science.gov (United States)

Martínez de Castro, Diana L; García-Gómez, Blanca I; Gómez, Isabel; Bravo, Alejandra; Soberón, Mario

2017-12-01

Bacillus thuringiensis Cry toxins are currently used for pest control in transgenic crops but evolution of resistance by the insect pests threatens the use of this technology. The Cry1AbMod toxin was engineered to lack the alpha helix-1 of the parental Cry1Ab toxin and was shown to counter resistance to Cry1Ab and Cry1Ac toxins in different insect species including the fall armyworm Spodoptera frugiperda. In addition, Cry1AbMod showed enhanced toxicity to Cry1Ab-susceptible S. frugiperda populations. To gain insights into the mechanisms of this Cry1AbMod-enhanced toxicity, we isolated the Cry1AbMod toxin binding proteins from S. frugiperda brush border membrane vesicles (BBMV), which were identified by pull-down assay and liquid chromatography-tandem mass spectrometry (LC-MS/MS). The LC-MS/MS results indicated that Cry1AbMod toxin could bind to four classes of aminopeptidase (N1, N3, N4 y N5) and actin, with the highest amino acid sequence coverage acquired for APN 1 and APN4. In addition to these proteins, we found other proteins not previously described as Cry toxin binding proteins. This is the first report that suggests the interaction between Cry1AbMod and APN in S. frugiperda. Copyright © 2017 Elsevier Inc. All rights reserved.

Through the Lenses of Hollywood: depictions of Terrorism in American Movies

Directory of Open Access Journals (Sweden)

Thomas Riegler

2010-11-01

Full Text Available This article argues that Hollywood cinema has shaped, and sometimes distorted, the perception of terrorism since the late 1960s. It does so by discussing emblematic movies in a comparative way. The main thesis is that Hollywood never seriously tried to offer an accurate assessment of terrorism. Instead, it offered a mediated version that transcends reality and is firmly rooted in a pop culture framework. Nonetheless, since movies are, according to cinema theorist Siegfried Kracauer, a "mirror of the prevailing society", they too reveal something about the historical evolution of terrorism and modifications in its understanding. Another issue briefly addressed is the question whether "real" terrorists tend to re-enact or copy (cinema"reel" violence – given the fact that terrorists too are subject to the influence of cinematic images and metaphors.

Assessment of RELAP5/MOD3 with condensation experiment for pure steam condensation in a vercal tube

Energy Technology Data Exchange (ETDEWEB)

Kim, Sang Jae; No, Hee Cheon [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1999-12-31

The film condensation models in RELAP5/MOD3.1 and RELAP5/MOD3.2 are assessed with the data of experiment performed in the scaled down condensation experimental facility with a single vertical tube of inner diameter of 46 mm in the range of pressure 0.1 {approx} 7.5 MPa for the PSCS(Passive Secondary Condenser System). Both MOD3.1 and MOD3.2 don`t shows any reliable predictions of the experimental data. The RELAP5/MOD3.1 overpredicts the heat transfer coefficients of experiment, whereas the RELAP5/MOD3.2 underpredicts those data. It is recommended that the film condensation model in RELAP5/MOD3.2 should be modified to have a larger heat transfer coefficient than those of the present model to give the reliable predictions. 7 refs., 6 figs., 1 tab. (Author)

Assessment of RELAP5/MOD3 with condensation experiment for pure steam condensation in a vercal tube

Energy Technology Data Exchange (ETDEWEB)

Kim, Sang Jae; No, Hee Cheon [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1998-12-31

The film condensation models in RELAP5/MOD3.1 and RELAP5/MOD3.2 are assessed with the data of experiment performed in the scaled down condensation experimental facility with a single vertical tube of inner diameter of 46 mm in the range of pressure 0.1 {approx} 7.5 MPa for the PSCS(Passive Secondary Condenser System). Both MOD3.1 and MOD3.2 don`t shows any reliable predictions of the experimental data. The RELAP5/MOD3.1 overpredicts the heat transfer coefficients of experiment, whereas the RELAP5/MOD3.2 underpredicts those data. It is recommended that the film condensation model in RELAP5/MOD3.2 should be modified to have a larger heat transfer coefficient than those of the present model to give the reliable predictions. 7 refs., 6 figs., 1 tab. (Author)

The mod industries? The industrial logic of non-market game production

OpenAIRE

2008-01-01

Abstract This article seeks to make the relationship between non-market game developers (modders) and the game developer company explicit through game technology. It investigates a particular type of modding, i.e. total conversion mod teams, whose organization can be said to conform to the high-risk, technologically-advanced, capital-intensive, proprietary practice of the developer company. The notion ...

Double-stranded DNA translocase activity of transcription factor TFIIH and the mechanism of RNA polymerase II open complex formation.

Science.gov (United States)

Fishburn, James; Tomko, Eric; Galburt, Eric; Hahn, Steven

2015-03-31

Formation of the RNA polymerase II (Pol II) open complex (OC) requires DNA unwinding mediated by the transcription factor TFIIH helicase-related subunit XPB/Ssl2. Because XPB/Ssl2 binds DNA downstream from the location of DNA unwinding, it cannot function using a conventional helicase mechanism. Here we show that yeast TFIIH contains an Ssl2-dependent double-stranded DNA translocase activity. Ssl2 tracks along one DNA strand in the 5' → 3' direction, implying it uses the nontemplate promoter strand to reel downstream DNA into the Pol II cleft, creating torsional strain and leading to DNA unwinding. Analysis of the Ssl2 and DNA-dependent ATPase activity of TFIIH suggests that Ssl2 has a processivity of approximately one DNA turn, consistent with the length of DNA unwound during transcription initiation. Our results can explain why maintaining the OC requires continuous ATP hydrolysis and the function of TFIIH in promoter escape. Our results also suggest that XPB/Ssl2 uses this translocase mechanism during DNA repair rather than physically wedging open damaged DNA.

Assessment of RELAP/MOD2 using large break loss-of-coolant experimental data

International Nuclear Information System (INIS)

Kao, L.; Liao, L.Y.; Liang, K.S.; Wang, S.F.; Chen, Y.B.

1989-01-01

In this paper assessment of RELAP5/MOD2 using LOFT L2-5 and Semiscale S-06-3 tests are performed to provide information of the code capability and its limitation in analyzing large break LOCA of a nuclear power plant. Experiments L2-5 and S-06-3 are conducted to simulate a hypothetical LOCA which results from a 200% double-ended offset shear break in the cold-leg of a typical pressurized water reactor by utilizing scaling facilities of the LOFT and Semiscale Mod-1 systems, respectively. The RELAP5/MOD2 calculations for both tests begin with break initiation and subsequent blowdown, continue through lower plenum refill, core reflood, and terminate with corewide quench. Major phenomena of both large break loss-of-coolant tests are well predicted by RELAP5/MOD2. The results indicate that the break flow and system pressure are reasonably calculated. The cladding temperature response during blowdown period, which is the major importance to a large break LOCA, calculated by RELAP5/MOD2 shows good agreement with the test data

Comparison of MAAP4.03 with RELAP/SCDAPSIM/MOD3.2

Energy Technology Data Exchange (ETDEWEB)

Kohriyama, T.; Ohtani, M. [Technical Support Project, Institute of Nuclear Technology, Institute of Nuclear Safety System, Incorporated, Mihama, Fukui (Japan); Ezzidi, A.; Morota, H. [Computer Software Development Co., Ltd., Tokyo (Japan)

2000-11-01

The MAAP4.03 code has been widely used for analyses of severe accident phenomena. It is, however, a system level code applying simpler models and could show phenomenological uncertainties. In order to support MAAP4.03 by a more detailed mechanistic code such as RELAP/SCDAPSIM/MOD3.2, code-to-code comparisons are performed. For a typical 4 loop PWR, analyses of two severe accident sequences were executed. Both codes predicted similar tendencies until the beginning of core melt. MAAP4.03 showed earlier slumping of molten core to a lower head of a reactor pressure vessel than RELAP/SCDAPSIM/MOD3.2. MAAP4.03 considers only axial flows of molten core and crusts suddenly breach by Creep Rupture. RELAP/SCDAPSIM/MOD3.2 treats axial and radial spreads by repeated cycles of melting, flowing and freezing. Bottom crusts can be supported by intact fuel rods. By these more realistic RELAP/SCDAPSIM/MOD3.2 models, MAAP4.03 could be supported maintaining conservatism. (author)

Les enjeux du modèle standard

CERN Document Server

CERN. Geneva

2008-01-01

Toute la matière visible dans l'Univers est décrite par le « Modèle Standard ». Selon cette théorie, la matière est constituée d'atomes, qui contiennent des électrons orbitant autour de noyaux, dont les composants fondamentaux sont les quarks. Quatre forces fondamentales agissent entre ces particules élémentaires : les forces électromagnétique est gravitationnelle, et les interactions nucléaires forte et faible. La description fournie par le Modèle Standard de ces particules et de leurs interactions est en parfait accord avec les expériences. Néanmoins, des questions fondamentales restent sans réponse jusqu'à maintenant : d'où vient la masse des particules ? Pourquoi y a-t-il tant de types de particules ? Existe-t-il une théorie unifiée de toutes les interactions ? Quelle est la nature de la matière cachée prédite par les astrophysiciens ? Le LHC au CERN donnera des éléments de réponse à ces questions au-delà du Modèle Standard.

Tanks Focus Area Alternative Salt Processing Research and Development Program Plan

Energy Technology Data Exchange (ETDEWEB)

Harmon, Harry D.

2000-05-15

In March 2000, DOE-Headquarters (HQ) requested the Tanks Focus Area (TFA)to assume management responsibility for the Salt Processing Project technology development program at Savannah River Site. The TFA was requested to conduct several activities, including review and revision of the technology development roadmaps, development of down-selection criteria, and preparation of a comprehensive Research and Development (R&D) Program Plan for three candidate cesium removal technologies, as well as the Alpha and strontium removal processes that must also be carried out. The three cesium removal candidate technologies are Crystalline Silicotitanate (CST) Non-Elutable Ion Exchange, Caustic Side Solvent Extraction (CSSX), and Small Tank Tetraphenylborate Precipitation (STTP). This plan describes the technology development needs for each process that must be satisfied in order to reach a down-selection decision, as well as continuing technology development required to support conceptual design activities.

Tanks Focus Area Alternative Salt Processing Research and Development Program Plan

Energy Technology Data Exchange (ETDEWEB)

Harmon, Harry D.

2000-11-30

In March 2000, DOE-Headquarters (HQ) requested the Tanks Focus Area (TFA) to assume management responsibility for the Salt Processing Project technology development program at Savannah River Site. The TFA was requested to conduct several activities, including review and revision of the technology development roadmaps, development of down-selection criteria, and preparation of a comprehensive Research and Development (R&D) Program Plan for three candidate cesium removal technologies, as well as the Alpha and strontium removal processes that must also be carried out. The three cesium removal candidate technologies are Crystalline Silicotitanate (CST) Non-Elutable Ion Exchange, Caustic Side Solvent Extraction (CSSX), and Small Tank Tetraphenylborate Precipitation (STTP). This plan describes the technology development needs for each process that must be satisfied in order to reach a down-selection decision, as well as continuing technology development required to support conceptual design activities.

Application of RELAP5/MOD3.1 code to the LOFT test L3-6

International Nuclear Information System (INIS)

Pylev, S.S.; Roginskaja, V.L.

1998-02-01

A calculation of LOFT Experiment L3-6, a small break equivalent to a 4-in diameter rupture in the cold leg of a four-loop commercial pressurized water reactor, has been performed to help validate RELAP5/MOD3.1 for this application. The version of the code to be used is SCDAP/RELAP5/MOD3.1.8d0. Three calculations were carried out in order to study the sensitivity to change break nozzle superheated discharge coefficient. Conducted comparative analysis of the LOFT L3-6 experiment shows on the whole a reasonable agreement between calculated data. Some discrepancies in the system pressure do not distort a picture of the transient. 6 refs

Application of RELAP5/MOD3.1 code to the LOFT test L3-6

Energy Technology Data Exchange (ETDEWEB)

Pylev, S.S.; Roginskaja, V.L.

1998-02-01

A calculation of LOFT Experiment L3-6, a small break equivalent to a 4-in diameter rupture in the cold leg of a four-loop commercial pressurized water reactor, has been performed to help validate RELAP5/MOD3.1 for this application. The version of the code to be used is SCDAP/RELAP5/MOD3.1.8d0. Three calculations were carried out in order to study the sensitivity to change break nozzle superheated discharge coefficient. Conducted comparative analysis of the LOFT L3-6 experiment shows on the whole a reasonable agreement between calculated data. Some discrepancies in the system pressure do not distort a picture of the transient. 6 refs.

Modèle exploitable pour la définition de la commande du robot

OpenAIRE

ZIMMER-CHEVRET, Sandra; LANGLOIS, Laurent; BEN ATTAR, Amarilys

2014-01-01

Ce document traite de la modélisation des actions mécaniques entre l’outil et la matière. L’objectif est de définir un modèle exploitable pour la définition de la commande du robot. Dans un premier temps, le rapport présente une synthèse bibliographique des modèles des interactions mécaniques développés à ce jour. Pour un modèle choisi, les paramètres constituant ce dernier ont été calculés à partir de données expérimentales. Puis, la validité du modèle a été étudiée. Pour une même configurat...

Progress on MOD/RABiTS{sup TM} 2G HTS wire

Energy Technology Data Exchange (ETDEWEB)

Rupich, M.W.; Zhang, W.; Li, X.; Kodenkandath, T.; Verebelyi, D.T.; Schoop, U.; Thieme, C.; Teplitsky, M.; Lynch, J.; Nguyen, N.; Siegal, E.; Scudiere, J.; Maroni, V.; Venkataraman, K.; Miller, D.; Holesinger, T.G

2004-10-01

The development of the second generation (2G) high temperature superconducting wire has advanced beyond initial laboratory demonstrations and is now focused on developing and testing high critical current conductor designs required for commercial applications. The approach pursued at American Superconductor for 2G wire manufacturing is based on the combination of the RABiTS{sup TM} substrate-buffer technology with metal organic deposition (MOD) of the YBCO layer. This MOD/RABiTS{sup TM} approach has been demonstrated in 10 m lengths with critical currents of up to 184 A/cm-width ({approx}2.3 MA/cm{sup 2}) and in short length with critical currents of up to 270 A/cm-width ({approx}3.4 MA/cm{sup 2}). In addition to a high critical current, the superconducting wire must also meet stringent mechanical and electrical stability requirements that vary by application. Commercially viable architectures designed to meet these specifications have been fabricated and tested. Wires manufactured by this process have been successfully tested in prototype cable and coil applications.

MOD-RTG multicouple test results and mission readiness

International Nuclear Information System (INIS)

Hartman, R.F.; Kelly, C.E.

1993-01-01

MOD-RTG represents the design configuration for the next generation of Radioisotope Thermoelectric Generators (RTG), aimed at improving specific power and efficiency over current General Purpose Heat Source Radioisotope Thermoelectric Generators (GPHS-RTGs). The modular RTG reference design has been described in previous papers (Hartman 1988). The multicouple is a key element required for the successful development of the modular RTG. The multicouple is a high voltage, thermoelectric device employing a close packed, glass bonded thermopile array of twenty thermoelectric couples, connected in a series circuit. The multicouple is designed to operate at a 1270 K hot junction temperature and a 570 K cold junction temperature, yielding a power output of approximately 2.1 watts at 3.5 volts at beginning of life. The objectives of the MOD-RTG program are focused on establishing a multicouple life test data base and life prediction capability which will permit, with reasonable margin, a projected multicouple life of greater than eight (8) years. This paper summarizes the current status of multicouple life testing and performance modeling and the level of technology readiness needed to demonstrate mission readiness for MOD-RTG

Recueil de modèles aléatoires

CERN Document Server

Chafai, Djalil

2016-01-01

Ce recueil puise sa source dans les cours de master de mathématiques appliquées et de préparation à l’épreuve de modélisation de l’agrégation de mathématiques. Le parti pris de cet ouvrage est de polariser la rédaction par les modèles plutôt que par les outils, et de consacrer chaque chapitre à un modèle. Le premier public visé est celui des enseignants-chercheurs en probabilités, débutants ou confirmés. De nombreux chapitres peuvent également bénéficier directement à des étudiants de master ou préparant l’agrégation. Collected Stochastic Models This collection was inspired by applied mathematics Master classes in stochastic modeling. The focus is on models rather than on tools, and each chapter is devoted to a specific model. Though the book is primarily intended for academics in the field of probability theory, beginners and experienced researchers alike, many chapters will also benefit students preparing to pursue their Master degree in mathematics. .

Operateurs et engins de calcul en virgule flottante et leur application a la simulation en temps reel sur FPGA

Science.gov (United States)

Ould Bachir, Tarek

The real-time simulation of electrical networks gained a vivid industrial interest during recent years, motivated by the substantial development cost reduction that such a prototyping approach can offer. Real-time simulation allows the progressive inclusion of real hardware during its development, allowing its testing under realistic conditions. However, CPU-based simulations suffer from certain limitations such as the difficulty to reach time-steps of a few microsecond, an important challenge brought by modern power converters. Hence, industrial practitioners adopted the FPGA as a platform of choice for the implementation of calculation engines dedicated to the rapid real-time simulation of electrical networks. The reconfigurable technology broke the 5 kHz switching frequency barrier that is characteristic of CPU-based simulations. Moreover, FPGA-based real-time simulation offers many advantages, including the reduced latency of the simulation loop that is obtained thanks to a direct access to sensors and actuators. The fixed-point format is paradigmatic to FPGA-based digital signal processing. However, the format imposes a time penalty in the development process since the designer has to asses the required precision for all model variables. This fact brought an import research effort on the use of the floating-point format for the simulation of electrical networks. One of the main challenges in the use of the floating-point format are the long latencies required by the elementary arithmetic operators, particularly when an adder is used as an accumulator, an important building bloc for the implementation of integration rules such as the trapezoidal method. Hence, single-cycle floating-point accumulation forms the core of this research work. Our results help building such operators as accumulators, multiply-accumulators (MACs), and dot-product (DP) operators. These operators play a key role in the implementation of the proposed calculation engines. Therefore, this

Origin of the diversity in DNA recognition domains in phasevarion associated modA genes of pathogenic Neisseria and Haemophilus influenzae.

Science.gov (United States)

Gawthorne, Jayde A; Beatson, Scott A; Srikhanta, Yogitha N; Fox, Kate L; Jennings, Michael P

2012-01-01

Phase variable restriction-modification (R-M) systems have been identified in a range of pathogenic bacteria. In some it has been demonstrated that the random switching of the mod (DNA methyltransferase) gene mediates the coordinated expression of multiple genes and constitutes a phasevarion (phase variable regulon). ModA of Neisseria and Haemophilus influenzae contain a highly variable, DNA recognition domain (DRD) that defines the target sequence that is modified by methylation and is used to define modA alleles. 18 distinct modA alleles have been identified in H. influenzae and the pathogenic Neisseria. To determine the origin of DRD variability, the 18 modA DRDs were used to search the available databases for similar sequences. Significant matches were identified between several modA alleles and mod gene from distinct bacterial species, indicating one source of the DRD variability was via horizontal gene transfer. Comparison of DRD sequences revealed significant mosaicism, indicating exchange between the Neisseria and H. influenzae modA alleles. Regions of high inter- and intra-allele similarity indicate that some modA alleles had undergone recombination more frequently than others, generating further diversity. Furthermore, the DRD from some modA alleles, such as modA12, have been transferred en bloc to replace the DRD from different modA alleles.

MOD-2 wind turbine system concept and preliminary design report. Volume 2: Detailed report

Science.gov (United States)

1979-01-01

The configuration development of the MOD-2 wind turbine system (WTS) is documented. The MOD-2 WTS project is a continuation of DOE programs to develop and achieve early commercialization of wind energy. The MOD-2 is design optimized for commercial production rates which, in multiunit installations, will be integrated into a utility power grid and achieve a cost of electricity at less than four cents per kilowatt hour.

RELAP4/MOD5: a computer program for transient thermal-hydraulic analysis of nuclear reactors and related systems. User's manual. Supplement 1, RELAP4/MOD5, Update 2

International Nuclear Information System (INIS)

Bruch, C.G.

1976-08-01

RELAP4/MOD5, Update 1 was released to the Nuclear Regulatory Commission in January 1976. Six months of extensive use of Update 1 has led to the identification and correction of a number of errors in the code, as well as some logic changes, additional Evaluation Model (EM) checks, and one model revision. These changes have culminated in the release of an improved code identified as RELAP4/MOD5, Update 2. The RELAP4/MOD5 interim User's Manual (Interim Report SRD-113-76) reflected the Update 1 version of the code. The purpose of the supplement presented is to update the Interim User's Manual for use with RELAP4/MOD5, Update 2. Major differences between Updates 1 and 2 and the checkout of Update 2 are discussed. The final version of the User's Manual will be written in accordance with Update 2 and will be published as ANCR-NUREG 1335 during September 1976. Annotation of the existing three volumes of the User's Manual to cross-reference this Supplement is recommended

PReMod: a database of genome-wide mammalian cis-regulatory module predictions.

Science.gov (United States)

Ferretti, Vincent; Poitras, Christian; Bergeron, Dominique; Coulombe, Benoit; Robert, François; Blanchette, Mathieu

2007-01-01

We describe PReMod, a new database of genome-wide cis-regulatory module (CRM) predictions for both the human and the mouse genomes. The prediction algorithm, described previously in Blanchette et al. (2006) Genome Res., 16, 656-668, exploits the fact that many known CRMs are made of clusters of phylogenetically conserved and repeated transcription factors (TF) binding sites. Contrary to other existing databases, PReMod is not restricted to modules located proximal to genes, but in fact mostly contains distal predicted CRMs (pCRMs). Through its web interface, PReMod allows users to (i) identify pCRMs around a gene of interest; (ii) identify pCRMs that have binding sites for a given TF (or a set of TFs) or (iii) download the entire dataset for local analyses. Queries can also be refined by filtering for specific chromosomal regions, for specific regions relative to genes or for the presence of CpG islands. The output includes information about the binding sites predicted within the selected pCRMs, and a graphical display of their distribution within the pCRMs. It also provides a visual depiction of the chromosomal context of the selected pCRMs in terms of neighboring pCRMs and genes, all of which are linked to the UCSC Genome Browser and the NCBI. PReMod: http://genomequebec.mcgill.ca/PReMod.

Culture and Creativity: World of Warcraft Modding in China and the US

Science.gov (United States)

Kow, Yong Ming; Nardi, Bonnie

Modding - end-user modification of commercial hardware and software - can be traced back at least to 1961 when Spacewar! was developed by a group of MIT students on a DEC PDP-1. Spacewar! evolved into arcade games including Space Wars produced in 1977 by Cinematronics (Sotamaa 2003). In 1992, players altering Wolfenstein 3-D (1992), a first person shooter game made by id Software, overwrote the graphics and sounds by editing the game files. Learning from this experience, id Software released Doom in 1993 with isolated media files and open source code for players to develop custom maps, images, sounds, and other utilities. Players were able to pass on their modifications to others. By 1996, with the release of Quake, end-user modifications had come to be known as "mods," and modding was an accepted part of the gaming community (Kucklich 2005; Postigo 2008a, b). Since late-2005, we have been studying World of Warcraft (WoW) in which the use of mods is an important aspect of player practice (Nardi and Harris 2006; Nardi et al. 2007). Technically minded players with an interest in extending the game write mods and make them available to players for free download on distribution sites. Most modders work for free, but the distribution sites are commercial enterprises with advertising.

Mission Operations Directorate - Success Legacy of the Space Shuttle Program (Overview of the Evolution and Success Stories from MOD During the Space Shuttle program)

Science.gov (United States)

Azbell, Jim A.

2011-01-01

In support of the Space Shuttle Program, as well as NASA's other human space flight programs, the Mission Operations Directorate (MOD) at the Johnson Space Center has become the world leader in human spaceflight operations. From the earliest programs - Mercury, Gemini, Apollo - through Skylab, Shuttle, ISS, and our Exploration initiatives, MOD and its predecessors have pioneered ops concepts and emphasized a history of mission leadership which has added value, maximized mission success, and built on continual improvement of the capabilities to become more efficient and effective. This paper provides specific examples that illustrate how MOD's focus on building and contributing value with diverse teams has been key to their successes both with the US space industry and the broader international community. This paper will discuss specific examples for the Plan, Train, Fly, and Facilities aspects within MOD. This paper also provides a discussion of the joint civil servant/contractor environment and the relative badge-less society within MOD. Several Shuttle mission related examples have also been included that encompass all of the aforementioned MOD elements and attributes, and are used to show significant MOD successes within the Shuttle Program. These examples include the STS-49 Intelsat recovery and repair, the (post-Columbia accident) TPS inspection process and the associated R-Bar Pitch Maneuver for ISS missions, and the STS-400 rescue mission preparation efforts for the Hubble Space Telescope repair mission. Since their beginning, MOD has consistently demonstrated their ability to evolve and respond to an ever changing environment, effectively prepare for the expected and successfully respond to the unexpected, and develop leaders, expertise, and a culture that has led to mission and Program success.

Programming list processes. SLIP: symmetric list processor - applications; Le traitement de listes en programmation. SLIP: langage de listes symetrique - applications

Energy Technology Data Exchange (ETDEWEB)

Broudin, Y [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)

1966-06-01

Modern aspects of programming languages are essentially turned towards list processing. The ordinary methods of sequential treatment become inadequate and we must substitute list processes for them, where the cells of a group have no neighbourhood connection, but where the address of one cell is contained in the preceding one. These methods are required in 'time sharing' solving problems. They also allow us to treat new problems and to solve others in the shortest time. Many examples are presented after an abstract of the most usual list languages and a detailed study of one of them : SLIP. Among these examples one should note: locating of words in a dictionary or in a card index, treatment of non numerical symbols, formal derivation. The problems are treated in Fortran II on an IBM 7094 machine. The subroutines which make up the language are presented in an appendix. (author) [French] La programmation moderne ne se satisfait plus des methodes classiques de traitement sequentiel ni des tableaux a positions de memoire contigues. Elle tend a generaliser les methodes de listes ou les cellules d'un groupe n'ont pas de relation de voisinage, mais sont enchainees en listes, l'une donnant l'adresse machine de l'autre. Ces methodes sont indispensables en 'partage de temps' et dans les traitements en 'temps reel'. De plus, elles permettent de traiter des problemes nouveaux et d'optimiser le temps de traitement de nombreux autres. De nombreux exemples sont traites, apres un resume des langages les plus utilises et une etude plus precise d'un langage de listes: SLIP. Parmi les exemples traites signalons la recherche lexicographique, le traitement de symboles alphanumeriques, la derivation formelle. Probleme traite en Fortran II sur IBM 7094. Les sous-programmes constitutifs du langage sont fournis en annexe. (auteur)

Automotive Stirling engine: Mod 2 design report

Science.gov (United States)

Nightingale, Noel P.

1986-01-01

The design of an automotive Stirling engine that achieves the superior fuel economy potential of the Stirling cycle is described. As the culmination of a 9-yr development program, this engine, designated the Mod 2, also nullifies arguments that Stirling engines are heavy, expensive, unreliable, demonstrating poor performance. Installed in a General Motors Chevrolet Celebrity car, this engine has a predicted combined fuel economy on unleaded gasoline of 17.5 km/l (41 mpg)- a value 50% above the current vehicle fleet average. The Mod 2 Stirling engine is a four-cylinder V-drive design with a single crankshaft. The engine is also equipped with all the controls and auxiliaries necessary for automotive operation.

Comparative studies of cutins from lime (Citrus aurantifolia) and grapefruit (Citrus paradisi) after TFA hydrolysis.

Science.gov (United States)

Hernández Velasco, Brenda Liliana; Arrieta-Baez, Daniel; Cortez Sotelo, Pedro Iván; Méndez-Méndez, Juan Vicente; Berdeja Martínez, Blanca Margarita; Gómez-Patiño, Mayra Beatriz

2017-12-01

Grapefruit and lime cutins were analyzed and compared in order to obtain information about their cutin architecture. This was performed using a sequential hydrolysis, first with trifluoroacetic acid to remove most of the polysaccharides present in the cutins, followed by an alkaline hydrolysis in order to obtain the main aliphatic compounds. Analysis by CPMAS 13 C NMR and ATR FT-IR of the cutins after 2.0 M TFA revealed that grapefruit cutin has independent aliphatic and polysaccharide domains while in the lime cutin these components could be homogeneously distributed. These observations were in agreement with an AFM analysis of the cutins obtained in the hydrolysis reactions. The main aliphatic compounds were detected and characterized as 16-hydroxy-10-oxo-hexadecanoic acid and 10,16-dihydroxyhexadecanoic acid. These were present in grapefruit cutin at 35.80% and 21.86% and in lime cutin at 20.44% and 40.36% respectively. Copyright © 2017 Elsevier Ltd. All rights reserved.

The molybdate-binding protein (ModA) of the plant pathogen Xanthomonas axonopodis pv. citri.

Science.gov (United States)

Balan, Andrea; Santacruz, Carolina P; Moutran, Alexandre; Ferreira, Rita C C; Medrano, Francisco J; Pérez, Carlos A; Ramos, Carlos H I; Ferreira, Luís C S

2006-12-01

The modABC operon of phytopathogen Xanthomonas axonopodis pv. citri (X. citri) encodes a putative ABC transporter involved in the uptake of the molybdate and tungstate anions. Sequence analyses showed high similarity values of ModA orthologs found in X. campestris pv. campestris (X. campestris) and Escherichia coli. The X. citri modA gene was cloned in pET28a and the recombinant protein, expressed in the E. coli BL21 (DE3) strain, purified by immobilized metal affinity chromatography. The purified protein remained soluble and specifically bound molybdate and tungstate with K(d) 0.29+/-0.12 microM and 0.58+/-0.14 microM, respectively. Additionally binding of molybdate drastically enhanced the thermal stability of the recombinant ModA as compared to the apoprotein. This is the first characterization of a ModA ortholog expressed by a phytopathogen and represents an important tool for functional, biochemical and structural analyses of molybdate transport in Xanthomonas species.

Kyllinger har effektivt immunforsvar mod herpes

DEFF Research Database (Denmark)

Buchmann, Kurt

2008-01-01

Forskere ved Københavns Universitet, Fakultet for Biovidenskab har studeret kyllingens MHC molekyler og kan derigennem forklare hvorfor en særlig stamme indenfor denne art er modstandsdygtige mod en særlig herpesvirus. Udgivelsesdato: 18. januar 2008...

Estimation des paramètres de modèles pour la digestion anaérobie

OpenAIRE

Martinez , Ricardo

2003-01-01

La finalité de ce travail a été d'estimer de la meilleure manière possible des paramètres de différents modèles sur la respiration anaérobie. Dans un premier temps nous présentons les bases qu'on utilise pour construire les modèles du procédé biochimique. Puis nous faisons une analyse qualitative des modèles les plus connus sur le sujet. Dans un deuxième temps nous avons suggéré différents modèles, afin de mieux estimer les paramètres du modèle initial. Nous avons mis au point un programme d'...

Physician-initiated courtesy MODS testing for TB and MDR-TB diagnosis and patient management.

Science.gov (United States)

Nic Fhogartaigh, C J; Vargas-Prada, S; Huancaré, V; Lopez, S; Rodríguez, J; Moore, D A J

2008-05-01

Laboratorio de Investigación de Enfermedades Infecciosas, Universidad Peruana Cayetano Heredia (UPCH) and government health centres, Lima, Peru. To evaluate the contribution of unselected (courtesy) microscopic observation drug susceptibility (MODS) testing to the diagnosis and/or drug susceptibility testing (DST) of tuberculosis and their subsequent impact upon patient management. Retrospective database analysis and case note review of MODS culture-positive cases. Mycobacterium tuberculosis was isolated in 28.9% of 225 samples (209 patients); 22.2% of 63 positive cases were multidrug-resistant. In 58 MODS culture-positive cases with follow-up data available, MODS provided culture confirmation of diagnosis, DST or both in 82.8%, before any standard method. In 41.4%, this result should have prompted a modification in patient management. Delays between laboratory result and initiation or change of treatment, where applicable, took on average 42 and 64 days, respectively, of which a delay of respectively 17 and 48 days occurred after the receipt of results by the health facility. MODS provides important data for clinical management within a meaningful timeframe and should contribute positively to patient outcomes due to earlier initiation of appropriate therapy. Although clinicians may successfully select patients likely to benefit from MODS, ongoing work is required to identify optimal implementation of the assay and to reduce logistical and health system derived delays.