Lean Manufacturing Implementation: an Approach to Reduce Production Cost

Directory of Open Access Journals (Sweden)

Iraswari

2012-04-01

Full Text Available Abstract: Lean Manufacturing Implementation: An Approach To Reduce Production Cost. Opportunities to improve production processes and reduce production cost through the implementation of lean manufacturing in small medium garment manufacturing are presented in this research. This research shows that there is a possibility of decrease in production cost and increase in return on sales. Lean manufacturing implementation can eliminate waste in the production process. This is a set of techniques for identification and elimination of waste gathered from The Ford Production, Statistical Process Control and other techniques. Improvement of quality could be carried out while time and cost of production are being reduced.

Reducing the cost of administrative justice

International Nuclear Information System (INIS)

Tourtellotte, J.R.

1982-01-01

In virtually every sector of government regulation, the complaint has been lodged that the costs of administrative justice are too high. These costs in time, money, resources, and productivity can have a profound effect on the individual consumer. When applied to an energy technology such as nuclear power, costs of administrative justice can transcent time and money to have even more profound and pervasive soeietal effects. Societal costs can be expressed in terms of their impact on important national concerns, that is, the standard of living, technological superiority, and the national energy equation. Some views are presented on the interests involved in the regulation of nuclear power and what can be done to bring those interests into better balance so as to reduce the cost of administrative justice

The ITER reduced cost design

International Nuclear Information System (INIS)

Aymar, R.

2000-01-01

Six years of joint work under the international thermonuclear experimental reactor (ITER) EDA agreement yielded a mature design for ITER which met the objectives set for it (ITER final design report (FDR)), together with a corpus of scientific and technological data, large/full scale models or prototypes of key components/systems and progress in understanding which both validated the specific design and are generally applicable to a next step, reactor-oriented tokamak on the road to the development of fusion as an energy source. In response to requests from the parties to explore the scope for addressing ITER's programmatic objective at reduced cost, the study of options for cost reduction has been the main feature of ITER work since summer 1998, using the advances in physics and technology databases, understandings, and tools arising out of the ITER collaboration to date. A joint concept improvement task force drawn from the joint central team and home teams has overseen and co-ordinated studies of the key issues in physics and technology which control the possibility of reducing the overall investment and simultaneously achieving the required objectives. The aim of this task force is to achieve common understandings of these issues and their consequences so as to inform and to influence the best cost-benefit choice, which will attract consensus between the ITER partners. A report to be submitted to the parties by the end of 1999 will present key elements of a specific design of minimum capital investment, with a target cost saving of about 50% the cost of the ITER FDR design, and a restricted number of design variants. Outline conclusions from the work of the task force are presented in terms of physics, operations, and design of the main tokamak systems. Possible implications for the way forward are discussed

Low-cost encapsulation materials for terrestrial solar cell modules

Science.gov (United States)

Cuddihy, E. F.; Baum, B.; Willis, P.

1979-01-01

The paper presents the findings of material surveys intended to identify low cost materials which could be functional as encapsulants (by 1986) for terrestrial solar cell modules. Economic analyses have indicated that in order to meet the low cost goal of $2.70 per sq m, some or all of the following material technologies must be developed or advanced: (1) UV screening outer covers; (2) elastomeric acrylics; (3) weatherproofing and waterproofing of structural wood and paper products; (4) transparent UV stabilizers for the UV-sensitive transparent pottants; and (5) cost-effective utilization of silicone and fluorocarbon materials.

The production of reduced graphene oxide by a low-cost vacuum system for supercapacitors applications

International Nuclear Information System (INIS)

Cardoso, Q.A.; Sakata, S.K.; Faria, R.N.; Silva, F.M.; Vieira, L.S.; Casini, J.C.S.

2016-01-01

Graphene (G) has attracted great interest for its excellent electrical properties. However, the large-scale production of graphene is still currently under investigations. Graphene oxide (GO) can be partially reduced to graphene-like sheets by removing the oxygen-containing groups with the recovery of a conjugated structure. It can be produced using inexpensive graphite as raw material by cost-effective chemical methods. High vacuum and temperature (10 -7 mbar/1100 deg C) is well established as an effective route for reduced powder preparation on a laboratory scale. However, a high vacuum reduction system, which can be routinely operated at 10 -7 mbar, has a considerable capital, operational and maintenance cost to be used in a large scale. In the present work, a low-cost route aiming large scale reduction of graphene oxide has been investigated. A stainless steel vessel has been evacuated to backing-pump pressure (10 -2 mbar) to process graphene oxide at low and high temperatures. Attempts of reducing GO powder using low vacuum pressures have been carried out and investigated by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The experimental results of processing graphene oxide powder at various temperatures (200-1000°C) at relatively low pressures have been reported. The microstructures of the processed material have been investigated using scanning electron microscopy (SEM) and chemical microanalyses employing energy dispersive X-ray analysis (EDX). (author)

Methodology for reducing energy and resource costs in construction of trenchless crossover of pipelines

Science.gov (United States)

Toropov, V. S.

2018-05-01

The paper suggests a set of measures to select the equipment and its components in order to reduce energy costs in the process of pulling the pipeline into the well in the constructing the trenchless pipeline crossings of various materials using horizontal directional drilling technology. A methodology for reducing energy costs has been developed by regulating the operation modes of equipment during the process of pulling the working pipeline into a drilled and pre-expanded well. Since the power of the drilling rig is the most important criterion in the selection of equipment for the construction of a trenchless crossover, an algorithm is proposed for calculating the required capacity of the rig when operating in different modes in the process of pulling the pipeline into the well.

Reducing costs of wind power with a gearless permanent-magnet generator

International Nuclear Information System (INIS)

Vihriaelae, H.; Peraelae, R.; Soederlund, L.; Eriksson, J.T.

1995-01-01

This article examines a disc-type axial-field permanent magnet generator (PMG) utilizing the latest generation of permanent magnet material, namely Nd 15 B 8 Fe 77 . A frequency converter (FC) is needed to keep the system synchronized with the grid. It also offers a possibility to use variable speed. The main advantages of this novel system compared to the conventional one are a higher overall efficiency, better reliability, reduced weight and diminished need for maintenance, all contributing to the cost-reduction of wind power. (author)

Cost-driven materials selection criteria for redox flow battery electrolytes

Science.gov (United States)

Dmello, Rylan; Milshtein, Jarrod D.; Brushett, Fikile R.; Smith, Kyle C.

2016-10-01

Redox flow batteries show promise for grid-scale energy storage applications but are presently too expensive for widespread adoption. Electrolyte material costs constitute a sizeable fraction of the redox flow battery price. As such, this work develops a techno-economic model for redox flow batteries that accounts for redox-active material, salt, and solvent contributions to the electrolyte cost. Benchmark values for electrolyte constituent costs guide identification of design constraints. Nonaqueous battery design is sensitive to all electrolyte component costs, cell voltage, and area-specific resistance. Design challenges for nonaqueous batteries include minimizing salt content and dropping redox-active species concentration requirements. Aqueous battery design is sensitive to only redox-active material cost and cell voltage, due to low area-specific resistance and supporting electrolyte costs. Increasing cell voltage and decreasing redox-active material cost present major materials selection challenges for aqueous batteries. This work minimizes cost-constraining variables by mapping the battery design space with the techno-economic model, through which we highlight pathways towards low price and moderate concentration. Furthermore, the techno-economic model calculates quantitative iterations of battery designs to achieve the Department of Energy battery price target of 100 per kWh and highlights cost cutting strategies to drive battery prices down further.

Cost-Effective Cementitious Material Compatible with Yucca Mountain Repository Geochemistry

Energy Technology Data Exchange (ETDEWEB)

Dole, LR

2004-12-17

The current plans for the Yucca Mountain (YM) repository project (YMP) use steel structures to stabilize the disposal drifts and connecting tunnels that are collectively over 100 kilometers in length. The potential exist to reduce the underground construction cost by 100s of millions of dollars and improve the repository's performance. These economic and engineering goals can be achieved by using the appropriate cementitious materials to build out these tunnels. This report describes the required properties of YM compatible cements and reviews the literature that proves the efficacy of this approach. This report also describes a comprehensive program to develop and test materials for a suite of underground construction technologies.

48 CFR 9904.411 - Cost accounting standard-accounting for acquisition costs of material.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Cost accounting standard-accounting for acquisition costs of material. 9904.411 Section 9904.411 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND...

Reducing Operating Room Costs Through Real-Time Cost Information Feedback: A Pilot Study.

Science.gov (United States)

Tabib, Christian H; Bahler, Clinton D; Hardacker, Thomas J; Ball, Kevin M; Sundaram, Chandru P

2015-08-01

To create a protocol for providing real-time operating room (OR) cost feedback to surgeons. We hypothesize that this protocol will reduce costs in a responsible way without sacrificing quality of care. All OR costs were obtained and recorded for robot-assisted partial nephrectomy and laparoscopic donor nephrectomy. Before the beginning of this project, costs pertaining to the 20 most recent cases were analyzed. Items were identified from previous cases as modifiable for replacement or omission. Timely feedback of total OR costs and cost of each item used was provided to the surgeon after each case, and costs were analyzed. A cost analysis of the robot-assisted partial nephrectomy before the washout period indicates expenditures of $5243.04 per case. Ten recommended modifiable items were found to have an average per case cost of $1229.33 representing 23.4% of the total cost. A postwashout period cost analysis found the total OR cost decreased by $899.67 (17.2%) because of changes directly related to the modifiable items. Therefore, 73.2% of the possible identified savings was realized. The same stepwise approach was applied to laparoscopic donor nephrectomies. The average total cost per case before the washout period was $3530.05 with $457.54 attributed to modifiable items. After the washout period, modifiable items costs were reduced by $289.73 (8.0%). No complications occurred in the donor nephrectomy cases while one postoperative complication occurred in the partial nephrectomy group. Providing surgeons with feedback related to OR costs may lead to a change in surgeon behavior and decreased overall costs. Further studies are needed to show equivalence in patient outcomes.

Manual for Reducing Educational Unit Costs in Latin American Countries.

Science.gov (United States)

Centro Multinacional de Investigacion Educativa, San Jose (Costa Rica).

Designed for educational administrators, this manual provides suggestions for reducing educational unit costs in Latin America without reducing the quality of the education. Chapter one defines unit cost concepts and compares the costs of the Latin American countries. Chapter two deals with the different policies which could affect the principal…

Waste Management Strategy for Dismantling Waste to Reduce Costs for Power Plant Decommissioning - 13543

Energy Technology Data Exchange (ETDEWEB)

Larsson, Arne; Lidar, Per [Studsvik Nuclear AB, SE-611 82 Nykoeping (Sweden); Bergh, Niklas; Hedin, Gunnar [Westinghouse Electric Sweden AB, Fredholmsgatan 2, SE-721 63, Vaesteraas (Sweden)

2013-07-01

interruptions. Bottle-necks in the process causes increased space requirements and will have negative impact on the project schedule, which increases not only the cost but also the dose exposure to personnel. For these reasons it is critical to create a process that transfers material into conditioned waste ready for disposal as quickly as possible. To a certain extent the decommissioning program should be led by the waste management process. With the objective to reduce time for handling of dismantled material at site and to efficiently and environmental-friendly use waste management methods (clearance for re-use followed by clearance for recycling), the costs for the plant decommissioning could be reduced as well as time needed for performing the decommissioning project. Also, risks for delays would be reduced with a well-defined handling scheme which limits surprises. Delays are a major cost driver for decommissioning projects. (authors)

Waste Management Strategy for Dismantling Waste to Reduce Costs for Power Plant Decommissioning - 13543

International Nuclear Information System (INIS)

Larsson, Arne; Lidar, Per; Bergh, Niklas; Hedin, Gunnar

2013-01-01

-necks in the process causes increased space requirements and will have negative impact on the project schedule, which increases not only the cost but also the dose exposure to personnel. For these reasons it is critical to create a process that transfers material into conditioned waste ready for disposal as quickly as possible. To a certain extent the decommissioning program should be led by the waste management process. With the objective to reduce time for handling of dismantled material at site and to efficiently and environmental-friendly use waste management methods (clearance for re-use followed by clearance for recycling), the costs for the plant decommissioning could be reduced as well as time needed for performing the decommissioning project. Also, risks for delays would be reduced with a well-defined handling scheme which limits surprises. Delays are a major cost driver for decommissioning projects. (authors)

Reducing costs of wind power with a gearless permanent-magnet generator

Energy Technology Data Exchange (ETDEWEB)

Vihriaelae, H; Peraelae, R; Soederlund, L; Eriksson, J T [Tampere Univ. of Technology (Finland). Lab. of Electricity and Magnetism

1996-12-31

This article examines a disc-type axial-field permanent magnet generator (PMG) utilizing the latest generation of permanent magnet material, namely Nd{sub 15}B{sub 8}Fe{sub 77}. A frequency converter (FC) is needed to keep the system synchronized with the grid. It also offers a possibility to use variable speed. The main advantages of this novel system compared to the conventional one are a higher overall efficiency, better reliability, reduced weight and diminished need for maintenance, all contributing to the cost-reduction of wind power. (author)

Reducing costs of wind power with a gearless permanent-magnet generator

Energy Technology Data Exchange (ETDEWEB)

Vihriaelae, H.; Peraelae, R.; Soederlund, L.; Eriksson, J.T. [Tampere Univ. of Technology (Finland). Lab. of Electricity and Magnetism

1995-12-31

This article examines a disc-type axial-field permanent magnet generator (PMG) utilizing the latest generation of permanent magnet material, namely Nd{sub 15}B{sub 8}Fe{sub 77}. A frequency converter (FC) is needed to keep the system synchronized with the grid. It also offers a possibility to use variable speed. The main advantages of this novel system compared to the conventional one are a higher overall efficiency, better reliability, reduced weight and diminished need for maintenance, all contributing to the cost-reduction of wind power. (author)

The production of reduced graphene oxide by a low-cost vacuum system for supercapacitors applications

Energy Technology Data Exchange (ETDEWEB)

Cardoso, Q.A.; Sakata, S.K.; Faria, R.N. [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil); Silva, F.M.; Vieira, L.S.; Casini, J.C.S., E-mail: julio.casini@ifro.edu.br [Instituto Federal de Ciencia e Tecnologia de Rondonia (IFRO), RO (Brazil)

2016-07-01

Graphene (G) has attracted great interest for its excellent electrical properties. However, the large-scale production of graphene is still currently under investigations. Graphene oxide (GO) can be partially reduced to graphene-like sheets by removing the oxygen-containing groups with the recovery of a conjugated structure. It can be produced using inexpensive graphite as raw material by cost-effective chemical methods. High vacuum and temperature (10{sup -7}mbar/1100 deg C) is well established as an effective route for reduced powder preparation on a laboratory scale. However, a high vacuum reduction system, which can be routinely operated at 10{sup -7} mbar, has a considerable capital, operational and maintenance cost to be used in a large scale. In the present work, a low-cost route aiming large scale reduction of graphene oxide has been investigated. A stainless steel vessel has been evacuated to backing-pump pressure (10{sup -2} mbar) to process graphene oxide at low and high temperatures. Attempts of reducing GO powder using low vacuum pressures have been carried out and investigated by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The experimental results of processing graphene oxide powder at various temperatures (200-1000°C) at relatively low pressures have been reported. The microstructures of the processed material have been investigated using scanning electron microscopy (SEM) and chemical microanalyses employing energy dispersive X-ray analysis (EDX). (author)

Nickel cobalt oxide nanowire-reduced graphite oxide composite material and its application for high performance supercapacitor electrode material.

Science.gov (United States)

Wang, Xu; Yan, Chaoyi; Sumboja, Afriyanti; Lee, Pooi See

2014-09-01

In this paper, we report a facile synthesis method of mesoporous nickel cobalt oxide (NiCo2O4) nanowire-reduced graphite oxide (rGO) composite material by urea induced hydrolysis reaction, followed by sintering at 300 degrees C. P123 was used to stabilize the GO during synthesis, which resulted in a uniform coating of NiCo2O4 nanowire on rGO sheet. The growth mechanism of the composite material is discussed in detail. The NiCo2O4-rGO composite material showed an outstanding electrochemical performance of 873 F g(-1) at 0.5 A g(-1) and 512 F g(-1) at 40 A g(-1). This method provides a promising approach towards low cost and large scale production of supercapacitor electrode material.

Reducing maintenance costs

International Nuclear Information System (INIS)

Zaiss, W.; Reuschle, K.; Baier, B.

2002-01-01

The increasingly more expensive maintenance measures, cuts in the cost budget, and the loss of know-how on the part of vendors all require a change of policy with respect to maintenance concepts of the part of operators. This also applies to the existing valve concepts, the drives included. Under these aspects, the current drive, which is self-actuated and actuated by outside media, for a parallel-plate valve of a nomial width of 700 was reconsidered. The effort served to reduce maintenance costs and, at the same time, simplify the drive concept as well as cut back on the number of in-service inspections. Moreover, the number of active components were to be minimized and installation conditions in the plant were to be improved. When the boundary conditions to be observed with respect to process technology had been laid down, the competent technical department developed a concept of modification of the drive. A major constituent part was the demonstration of the functioning capability of the new drive under accident conditions. It was achieved mainly by an analytical approach. In the resultant drive concept, the same control valves are employed to actuate a driving cylinder by means of self-actuation or by an outside medium as a function of pressure. (orig.) [de

Reducing Interaction Costs for Self-interested Agents

Science.gov (United States)

Zhang, Yunqi; Larson, Kate

In many multiagent systems, agents are not able to freely interact with each other or with a centralized mechanism. They may be limited in their interactions by cost or by the inherent structure of the system. Using a combinatorial auction application as motivation, we study the impact of interaction costs and structure on the strategic behaviour of self-interested agents. We present a particular model of costly agent-interaction, and argue that self-interested agents may wish to coordinate their actions with their neighbours so as to reduce their individual costs. We highlight the issues that arise in such a setting, propose a cost-sharing mechanism that agents can use, and discuss group coordination procedures. Experimental work validates our model.

Autonomous Droop Scheme With Reduced Generation Cost

DEFF Research Database (Denmark)

Nutkani, Inam Ullah; Loh, Poh Chiang; Wang, Peng

2014-01-01

) of the microgrid. To reduce this TGC without relying on fast communication links, an autonomous droop scheme is proposed here, whose resulting power sharing is decided by the individual DG generation costs. Comparing it with the traditional scheme, the proposed scheme retains its simplicity and it is hence more....... This objective might, however, not suit microgrids well since DGs are usually of different types, unlike synchronous generators. Other factors like cost, efficiency, and emission penalty of each DG at different loading must be considered since they contribute directly to the total generation cost (TGC...

Costs of reducing nutrient losses in Denmark

DEFF Research Database (Denmark)

Jacobsen, Brian H.; Abildtrup, Jens; Jensen, Jørgen Dejgård

to the eastern part of Denmark. The final plan for the Aquatic Environment III from 2004 included a 13% reduction of N-leaching until 2015 based on cost effective administrative measures like wetlands and catch crops. Also a tax on mineral phosphorus in feedstuffs was included in order to half the phosphorus......The economic calculations carried out prior to the Plan for the Aquatic Environment III included a comparison of regulation systems aimed at reducing nitrogen leaching, analyses of measures for reducing phosphorus losses and estimation of administrative costs. The conclusions were that taxation...... surplus. The measures in the Plan will have to be supplemented by more measures to meet the targets in the EU's Water Framework Directive....

New tube fitting range can slash assembly time, reduce tube material costs and eliminate hot work

Energy Technology Data Exchange (ETDEWEB)

Anon.

2008-09-15

Parker Instrumentation has developed a permanent tube connection technology known as Phastite for use in high pressure applications such as in the offshore oil and gas sector. The Phastite push-fit connector offers major savings over traditional permanent and higher pressure connection techniques such as welded or cone-and-thread tube fittings. It also reduces assembly times by 20-fold or more and eliminates the need for hot work permits. The fittings are designed to withstand working pressures up to 1,379 bar. Phastite tube fittings can be used on offshore platforms, as well as on support vessels,, subsea equipment and ROVs such as hydraulic systems for wellhead control, emergency shut down, chemical injection, pumping packages, gas booster systems and test equipment. The connectors offer considerable savings in material cost and weight because they do not need to be used with more expensive tubing with extra thickness to accommodate a thread. Phastite is also resistant to vibration and does not need any anti-vibration accessories. A joint can be made in a matter of seconds with a simple handheld hydraulic tool that makes the push-fit connection. A sealing mechanism based on a series of defined internal ridges creates a secure seal by radial compression. The ridges grip in a way that retains all of the tubing's strength. An additional characteristic is the maintenance free nature of the Phastite connection. 1 fig.

Costs of emission-reducing manure application

NARCIS (Netherlands)

Huijsmans, J.F.M.; Verwijs, B.; Rodhe, L.; Smith, K.

2004-01-01

Favourable economics of handling and application of manure are of fundamental importance to encourage the implementation of emission-reducing application techniques. The economics of manure application depend on the costs of the equipment and the time to carry out the field operation. In this study

Reducing capital and operating costs in gas processing, liquefaction, and storage

Energy Technology Data Exchange (ETDEWEB)

Krusen, III, L C [Phillips Petroleum Co., Bartlesville, OK (United States). Research Div.

1997-06-01

The LNG industry is unanimous that capital costs must be reduced throughout the chain, and especially at the liquefaction facility including associated gas processing and LNG storage. The Ken ai LNG plant provides an example of how both reduced capital and operating costs were attained. This paper will cover cost production strategies that can be applied to liquefaction processes in general, and will than focus on their realization in the Phillips Optimized Cascade LNG process. The paper concludes that reduced LNG plant costs are attainable. (Author).

Reducing capital and operating costs in gas processing, liquefaction, and storage

International Nuclear Information System (INIS)

Krusen, L.C. III

1997-01-01

The LNG industry is unanimous that capital costs must be reduced throughout the chain, and especially at the liquefaction facility including associated gas processing and LNG storage. The Ken ai LNG plant provides an example of how both reduced capital and operating costs were attained. This paper will cover cost production strategies that can be applied to liquefaction processes in general, and will than focus on their realization in the Phillips Optimized Cascade LNG process. The paper concludes that reduced LNG plant costs are attainable. (Author)

Reducing Design Cycle Time and Cost Through Process Resequencing

Science.gov (United States)

Rogers, James L.

2004-01-01

In today's competitive environment, companies are under enormous pressure to reduce the time and cost of their design cycle. One method for reducing both time and cost is to develop an understanding of the flow of the design processes and the effects of the iterative subcycles that are found in complex design projects. Once these aspects are understood, the design manager can make decisions that take advantage of decomposition, concurrent engineering, and parallel processing techniques to reduce the total time and the total cost of the design cycle. One software tool that can aid in this decision-making process is the Design Manager's Aid for Intelligent Decomposition (DeMAID). The DeMAID software minimizes the feedback couplings that create iterative subcycles, groups processes into iterative subcycles, and decomposes the subcycles into a hierarchical structure. The real benefits of producing the best design in the least time and at a minimum cost are obtained from sequencing the processes in the subcycles.

External costs of material recycling strategies for fusion power plants

International Nuclear Information System (INIS)

Hallberg, B.; Aquilonius, K.; Lechon, Y.; Cabal, H.; Saez, R.M.; Schneider, T.; Lepicard, S.; Ward, D.; Hamacher, T.; Korhonen, R.

2003-01-01

This paper is based on studies performed within the framework of the project Socio-Economic Research on Fusion (SERF3). Several fusion power plant designs (SEAFP Models 1-6) were compared focusing on part of the plant's life cycle: environmental impact of recycling the materials. Recycling was considered for materials replaced during normal operation, as well as materials from decommissioning of the plant. Environmental impact was assessed and expressed as external cost normalised with the total electrical energy output during plant operation. The methodology used for this study has been developed by the Commission of the European Union within the frame of the ExternE project. External costs for recycling, normalised with the energy production during plant operation, are very low compared with those for other energy sources. Results indicate that a high degree of recycling is preferable, at least when considering external costs, because external costs of manufacturing of new materials and disposal costs are higher

Cost-effectiveness of pharmacotherapy to reduce obesity.

Directory of Open Access Journals (Sweden)

J Lennert Veerman

Full Text Available AIMS: Obesity causes a high disease burden in Australia and across the world. We aimed to analyse the cost-effectiveness of weight reduction with pharmacotherapy in Australia, and to assess its potential to reduce the disease burden due to excess body weight. METHODS: We constructed a multi-state life-table based Markov model in Excel in which body weight influences the incidence of stroke, ischemic heart disease, hypertensive heart disease, diabetes mellitus, osteoarthritis, post-menopausal breast cancer, colon cancer, endometrial cancer and kidney cancer. We use data on effectiveness identified from PubMed searches, on mortality from Australian Bureau of Statistics, on disease costs from the Australian Institute of Health and Welfare, and on drug costs from the Department of Health and Ageing. We evaluate 1-year pharmacological interventions with sibutramine and orlistat targeting obese Australian adults free of obesity-related disease. We use a lifetime horizon for costs and health outcomes and a health sector perspective for costs. Incremental Cost-Effectiveness Ratios (ICERs below A$50 000 per Disability Adjusted Life Year (DALY averted are considered good value for money. RESULTS: The ICERs are A$130 000/DALY (95% uncertainty interval [UI] 93 000-180 000 for sibutramine and A$230 000/DALY (170 000-340 000 for orlistat. The interventions reduce the body weight-related disease burden at the population level by 0.2% and 0.1%, respectively. Modest weight loss during the interventions, rapid post-intervention weight regain and low adherence limit the health benefits. CONCLUSIONS: Treatment with sibutramine or orlistat is not cost-effective from an Australian health sector perspective and has a negligible impact on the total body weight-related disease burden.

development of low-cost educational materials for chemistry

African Journals Online (AJOL)

unesco

development of low-cost Chemistry materials from locally available materials. It finally lists the ... According to the World Bank discussion paper (3) large investments have been made to improve the .... official language in Ethiopia) and English.

Leveraging Technology to Reduce Patient Transaction Costs.

Science.gov (United States)

Edlow, Richard C

2015-01-01

Medical practices are under significant pressure to provide superior customer service in an environment of declining or flat reimbursement. The solution for many practices involves the integration of a variety of third-party technologies that conveniently interface with one's electronic practice management and medical records systems. Typically, the applications allow the practice to reduce the cost of each patient interaction. Drilling down to quantify the cost of each individual patient interaction helps to determine the practicality of implementation.

Reducing biosolids disposal costs using land application in forested areas

International Nuclear Information System (INIS)

Huffines, R.L.

1995-01-01

Switching biosolids land application from a reclamation site to a forested site significantly reduced the cost of biosolids disposal at the Savannah River Site. Previous beneficial reuse programs focused on reclamation of existing borrow pits. While extremely beneficial, this program became very costly due to the regulatory requirements for groundwater monitoring, soil monitoring and frequent biosolids analyses. A new program was developed to reuse biosolids in forested areas where the biosolids could be used as a soil conditioner and fertilizer to enhance timber yield. The forested land application site was designed so that groundwater monitoring and soil monitoring could be eliminated while biosolids monitoring and site maintenance were minimized. Monitoring costs alone were reduced by 80%. Capital costs for site preparation were also significantly reduced since there was no longer a need for expensive groundwater monitoring wells

Reducing health care costs - potential and limitations of local ...

African Journals Online (AJOL)

Reducing health care costs - potential and limitations of local authority health services. ... both the quality and the cost-effectiveness of health care would be improved. ... LAs offer an appropriate structure for effective community control over the ...

Potential and cost-effectiveness of CO{sub 2}-reducing measures in the pulp and paper industry

Energy Technology Data Exchange (ETDEWEB)

Moellersten, K.; Westermark, M.; Yan, J. [Royal Institute of Technology (KTH), Stockholm (Sweden). Dept. of Chemical Engineering and Technology/Energy Processes

2001-07-01

Using the two criteria of potential CO{sub 2} reduction and cost of CO{sub 2} reduction several technical options in the pulp and paper industry are investigated. Principal CO{sub 2} reducing measures include: decreasing fuel consumption through improved heat exchanging or new processes with lower heat demand, decreasing electricity consumption, substituting fossil fuels with biofuels, exporting refined biofuels for external use, increasing CO{sub 2} neutral electricity generation, improving waste heat utilization and decreasing specific raw material consumption. The results show that electricity conservation and improvement of existing steam power cycles are the most cost-effective options that have a large potential to reduce CO{sub 2} emissions. Outsourcing of industrial energy operations to utilities may enable CO{sub 2} reducing measures that would not be carried out by industry due to differences in demands for profit on spent capita. 21 refs., 1 fig., 2 tabs.

Cost reducing investments and spatial competition

OpenAIRE

Domenico Scalera; Alberto Zazzaro

2005-01-01

In this paper we analyze the relationship between competition and cost reducing investments in the context of a location model. In particular, we derive the symmetric subgame-perfect equilibrium of a three-stage circular city model with closed-loop strategies, and study the effects of changes in competition fundamentals under both a given number of firms and free entry

The Dynamics of Bertrand Price Competition with Cost-Reducing Investments

DEFF Research Database (Denmark)

Iskhakov, Fedor; Rust, John; Schjerning, Bertel

We present a dynamic extension of the classic static model of Bertrand price competition that allows competing duopolists to undertake cost-reducing investments in an attempt to “leapfrog” their rival to attain low-cost leadership – at least temporarily. We show that leapfrogging occurs in equili......We present a dynamic extension of the classic static model of Bertrand price competition that allows competing duopolists to undertake cost-reducing investments in an attempt to “leapfrog” their rival to attain low-cost leadership – at least temporarily. We show that leapfrogging occurs...... in equilibrium, resolving the Bertrand investment paradox., i.e. leapfrogging explains why firms have an ex ante incentive to undertake cost-reducing investments even though they realize that simultaneous investments to acquire the state of the art production technology would result in Bertrand price competition...... leader. We show that the equilibrium involves investment preemption only when the firms invest in a deterministically alternating fashion and technological progress is deterministic. We prove that when technological progress is deterministic and firms move in an alternating fashion, the game has a unique...

Validated Feasibility Study of Integrally Stiffened Metallic Fuselage Panels for Reducing Manufacturing Costs

Science.gov (United States)

Pettit, R. G.; Wang, J. J.; Toh, C.

2000-01-01

The continual need to reduce airframe cost and the emergence of high speed machining and other manufacturing technologies has brought about a renewed interest in large-scale integral structures for aircraft applications. Applications have been inhibited, however, because of the need to demonstrate damage tolerance, and by cost and manufacturing risks associated with the size and complexity of the parts. The Integral Airframe Structures (IAS) Program identified a feasible integrally stiffened fuselage concept and evaluated performance and manufacturing cost compared to conventional designs. An integral skin/stiffener concept was produced both by plate hog-out and near-net extrusion. Alloys evaluated included 7050-T7451 plate, 7050-T74511 extrusion, 6013-T6511 extrusion, and 7475-T7351 plate. Mechanical properties, structural details, and joint performance were evaluated as well as repair, static compression, and two-bay crack residual strength panels. Crack turning behavior was characterized through panel tests and improved methods for predicting crack turning were developed. Manufacturing cost was evaluated using COSTRAN. A hybrid design, made from high-speed machined extruded frames that are mechanically fastened to high-speed machined plate skin/stringer panels, was identified as the most cost-effective manufacturing solution. Recurring labor and material costs of the hybrid design are up to 61 percent less than the current technology baseline.

Microstructural Properties of Cement Paste and Mortar Modified by Low Cost Nanoplatelets Sourced from Natural Materials

Directory of Open Access Journals (Sweden)

Piao Huang

2018-05-01

Full Text Available Nanomaterials have been widely used in cement-based materials. Graphene has excellent properties for improving the durability of cement-based materials. Given its high production budget, it has limited its wide potential for application in the field of engineering. Hence, it is very meaningful to obtain low cost nanoplatelets from natural materials that can replace graphene nanoplatelets (GNPs The purpose of this paper is to improve the resistance to chloride ion penetration by optimizing the pore structure of cement-based materials, and another point is to reduce investment costs. The results illustrated that low cost CaCO3 nanoplatelets (CCNPs were successfully obtained under alkali treatment of seashell powder, and the chloride ion permeability of cement-based materials significantly decreased by 15.7% compared to that of the control samples when CCNPs were incorporated. Furthermore, the compressive strength of cement pastes at the age of 28 days increased by 37.9% than that of the plain sample. Improvement of performance of cement-based materials can be partly attributed to the refinement of the pore structure. In addition, AFM was employed to characterize the nanoplatelet thickness of CCNPs and the pore structures of the cement-based composites were analyzed by MIP, respectively. CCNPs composite cement best performance could lay the foundation for further study of the durability of cement-based materials and the application of decontaminated seashells.

Cost effective material control and accountability training

International Nuclear Information System (INIS)

Robichaux, J.J.; Shull, L.M.; Salizzoni, L.M.

1995-01-01

DOE Order 5630.15, ''Safeguards and Security Training Program'' is being implemented at the Savannah River Site within the Westinghouse Savannah River Company's material control and accountability program. This paper reviews the development of a material control and accountability task analysis, the development of specific material control and accountability courses, and the cost effective and innovative strategies employed to implement the training program. The paper also discusses how the site material control and accountability policies and procedures are incorporated into the Westinghouse Savannah River Company training program to ensure that personnel receive the most current information

Methods for cost-benefit-risk analysis of material-accounting upgrades

International Nuclear Information System (INIS)

Fishbone, L.G.; Gordon, D.M.; Higinbotham, W.; Keisch, B.

1988-01-01

The authors have developed a cost-benefit-risk methodology for evaluating material-accounting upgrades at key measurement points in nuclear facilities. The focus of this methodology is on nuclear-material measurements and their effects on inventory differences and shipper/receiver differences. The methodology has three main components: cost, benefits, and risk factors. The fundamental outcome of the methodology is therefore cost-benefit ratios characterizing the proposed upgrades, with the risk factors applied as necessary to the benefits. Examples illustrate the methodology's use

Reducing the Cost of Grid Extension for Rural Electrification

OpenAIRE

NRECA International, Ltd.

2000-01-01

This study first reviews the cost of grid extension in a number of countries. It then identifies ways to reduce costs by examining how they are affected by a variety of factors. An electricity supply system may be divided into two discrete components: the grid extension and the low-voltage distribution system. This study will focus on the first of these two components, the cost of grid ext...

Methods Reduce Cost, Enhance Quality of Nanotubes

Science.gov (United States)

2009-01-01

For all the challenges posed by the microgravity conditions of space, weight is actually one of the more significant problems NASA faces in the development of the next generation of U.S. space vehicles. For the Agency s Constellation Program, engineers at NASA centers are designing and testing new vessels as safe, practical, and cost-effective means of space travel following the eventual retirement of the space shuttle. Program components like the Orion Crew Exploration Vehicle, intended to carry astronauts to the International Space Station and the Moon, must be designed to specific weight requirements to manage fuel consumption and match launch rocket capabilities; Orion s gross liftoff weight target is about 63,789 pounds. Future space vehicles will require even greater attention to lightweight construction to help conserve fuel for long-range missions to Mars and beyond. In order to reduce spacecraft weight without sacrificing structural integrity, NASA is pursuing the development of materials that promise to revolutionize not only spacecraft construction, but also a host of potential applications on Earth. Single-walled carbon nanotubes are one material of particular interest. These tubular, single-layer carbon molecules - 100,000 of them braided together would be no thicker than a human hair - display a range of remarkable characteristics. Possessing greater tensile strength than steel at a fraction of the weight, the nanotubes are efficient heat conductors with metallic or semiconductor electrical properties depending on their diameter and chirality (the pattern of each nanotube s hexagonal lattice structure). All of these properties make the nanotubes an appealing material for spacecraft construction, with the potential for nanotube composites to reduce spacecraft weight by 50 percent or more. The nanotubes may also feature in a number of other space exploration applications, including life support, energy storage, and sensor technologies. NASA s various

Reduced cost and improved figure of sapphire optical components

Science.gov (United States)

Walters, Mark; Bartlett, Kevin; Brophy, Matthew R.; DeGroote Nelson, Jessica; Medicus, Kate

2015-10-01

Sapphire presents many challenges to optical manufacturers due to its high hardness and anisotropic properties. Long lead times and high prices are the typical result of such challenges. The cost of even a simple 'grind and shine' process can be prohibitive. The high precision surfaces required by optical sensor applications further exacerbate the challenge of processing sapphire thereby increasing cost further. Optimax has demonstrated a production process for such windows that delivers over 50% time reduction as compared to traditional manufacturing processes for sapphire, while producing windows with less than 1/5 wave rms figure error. Optimax's sapphire production process achieves significant improvement in cost by implementation of a controlled grinding process to present the best possible surface to the polishing equipment. Following the grinding process is a polishing process taking advantage of chemical interactions between slurry and substrate to deliver excellent removal rates and surface finish. Through experiments, the mechanics of the polishing process were also optimized to produce excellent optical figure. In addition to reducing the cost of producing large sapphire sensor windows, the grinding and polishing technology Optimax has developed aids in producing spherical sapphire components to better figure quality. In addition to reducing the cost of producing large sapphire sensor windows, the grinding and polishing technology Optimax has developed aids in producing spherical sapphire components to better figure quality. Through specially developed polishing slurries, the peak-to-valley figure error of spherical sapphire parts is reduced by over 80%.

Strategies Used by Adults to Reduce Their Prescription Drug Costs

Science.gov (United States)

... data from the 2011 National Health Interview Survey (NHIS). Keywords: National Health Interview Survey, alternative therapies, medication ... to cost ( 9 ) that are not measured in NHIS. Definitions Strategies for reducing prescription drug costs : Based ...

Development of polymer concrete for dike insulation at LNG facilities: Phase 4, Low cost materials. Final report, September 1, 1987--April 30, 1990

Energy Technology Data Exchange (ETDEWEB)

Kukacka, L.E.

1991-01-01

Earlier GRI-sponsored work at Brookhaven National Laboratory has resulted in the development and utilization of insulating polymer concrete composites (IPC) as a means of reducing the evaporation rate of liquified natural gas in the event of a spill into a containment dike, thereby improving the safety at these sites. Although all of the required properties can be attained with the IPC, it was estimated that a low-cost replacement for the expensive organic binder would be necessary before use of the material would be cost-effective. In the current program, several latex modified cement formulations were evaluated and the most promising one identified. A mixture of two carboxylated styrene-butadiene latexes was selected for use in detailed laboratory property characterizations and a subsequent field evaluation. When compared to the properties of IPC, the latex-modified insulating materials display somewhat higher thermal conductivities, greater permeability to water, and reduced strength. However, these properties still meet most of the performance criteria, and the unit cost of the material is less than one-fifth that of IPC made with epoxy binders. When installed as a 0.75-in. thick overlay, material costs are estimated to be $1.00/ft{sup 2}.

Are the Costs of Reducing Greenhouse Gases from Passenger Vehicles Negative?

OpenAIRE

Parry, Ian W.H.

2006-01-01

Energy models suggest that the cost of reducing carbon emissions from the transportation sector is high relative to other sectors, such as electricity generation. However, this paper shows that taxes to reduce passenger vehicle emissions produce large net benefits, rather than costs, when account is taken of (a) their impact on reducing non-carbon externalities from passenger vehicle use, and (b) interactions with the broader fiscal system. Both of these considerations also strengthen the cas...

Segmentation of low‐cost high efficiency oxide‐based thermoelectric materials

DEFF Research Database (Denmark)

Le, Thanh Hung; Van Nong, Ngo; Linderoth, Søren

2015-01-01

Thermoelectric (TE) oxide materials have attracted great interest in advanced renewable energy research owing to the fact that they consist of abundant elements, can be manufactured by low-cost processing, sustain high temperatures, be robust and provide long lifetime. However, the low conversion...... efficiency of TE oxides has been a major drawback limiting these materials to broaden applications. In this work, theoretical calculations are used to predict how segmentation of oxide and semimetal materials, utilizing the benefits of both types of materials, can provide high efficiency, high temperature...... oxide-based segmented legs. The materials for segmentation are selected by their compatibility factors and their conversion efficiency versus material cost, i.e., “efficiency ratio”. Numerical modelling results showed that conversion efficiency could reach values of more than 10% for unicouples using...

Performance and cost of materials for lithium-based rechargeable automotive batteries

Science.gov (United States)

Schmuch, Richard; Wagner, Ralf; Hörpel, Gerhard; Placke, Tobias; Winter, Martin

2018-04-01

It is widely accepted that for electric vehicles to be accepted by consumers and to achieve wide market penetration, ranges of at least 500 km at an affordable cost are required. Therefore, significant improvements to lithium-ion batteries (LIBs) in terms of energy density and cost along the battery value chain are required, while other key performance indicators, such as lifetime, safety, fast-charging ability and low-temperature performance, need to be enhanced or at least sustained. Here, we review advances and challenges in LIB materials for automotive applications, in particular with respect to cost and performance parameters. The production processes of anode and cathode materials are discussed, focusing on material abundance and cost. Advantages and challenges of different types of electrolyte for automotive batteries are examined. Finally, energy densities and costs of promising battery chemistries are critically evaluated along with an assessment of the potential to fulfil the ambitious targets of electric vehicle propulsion.

A cost-benefit analysis for materials management information systems.

Science.gov (United States)

Slapak-Iacobelli, L; Wilde, A H

1993-02-01

The cost-benefit analysis provided the system planners with valuable information that served many purposes. It answered the following questions: Why was the CCF undertaking this project? What were the alternatives? How much was it going to cost? And what was the expected outcome? The process of developing cost-benefit the document kept the project team focused. It also motivated them to involve additional individuals from materials management and accounts payable in its development. A byproduct of this involvement was buy-in and commitment to the project by everyone in these areas. Consequently, the project became a team effort championed by many and not just one. We were also able to introduce two new information system processes: 1) a management review process with goals and anticipated results, and 2) a quality assurance process that ensured the CCF had a better product in the end. The cost-benefit analysis provided a planning tool that assisted in successful implementation of an integrated materials management information system.

Energy-efficient induction motors designing with application of a modified criterion of reduced costs

Directory of Open Access Journals (Sweden)

V.S. Petrushin

2014-03-01

Full Text Available The paper introduces a modified criterion of reduced costs that employs coefficients of operation significance and priority of ohmic loss accounting to allow matching maximum efficiency with minimum reduced costs. Impact of the inflation factor on the criterion of reduced costs is analyzed.

New transmission interconnection reduces consumer costs

Energy Technology Data Exchange (ETDEWEB)

Anon.

2008-09-15

The Central American electric interconnection system (SIEPAC) project will involve the construction of a 1830 km 230 kV transmission system that will link Guatemala, El Salvador, Honduras, Costa Rica, Nicaragua, and Panama. The system is expected to alleviate the region's power shortages and reduce electricity costs for consumers. Costs for the SIEPAC project have been estimated at $370 million. The system will serve approximately 37 million customers, and will include 15 substations. The contract for building the electrical equipment has been awarded to Schweitzer Engineering Laboratories (SEL) who plan to manufacture components at a plant in Mexico. The equipment will include high speed line protection, automation, and control systems. Line current differential systems and satellite-synchronized clocks will also be used. The new transmission system is expected to be fully operational by 2009. 1 fig.

Costs reduced by innovative plastic distribution pipe use

International Nuclear Information System (INIS)

Maxwell, F.W.

1995-01-01

As part of a strategic corporate cost-reduction initiative, Pacific Gas and Electric Company's Gas Distribution Group has achieved some quick but significant cash savings. System design, construction, and the purchasing function were areas that produced some fast paybacks while maintaining reliability and safety. The primary savings were made by optimizing pipe specifications to match system operating parameters. This allowed the use of smaller diameter pipes and/or thinner wall pipes which conserved the materials cost of the pipeline. Other realized savings in the form of coiled pipe, purchasing changes, and backfilling specifications are also described

48 CFR 1631.205-78 - FEHBP printed material costs.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true FEHBP printed material... carrier orders printed material that is available from the Government Printing Office (GPO) under the... COST PRINCIPLES AND PROCEDURES Contracts With Commercial Organizations 1631.205-78 FEHBP printed...

Effect of self-glazing on reducing the radioactivity levels of red mud based ceramic materials

Energy Technology Data Exchange (ETDEWEB)

Qin, Shuo [College of Material Science and Engineering, Guilin University of Technology, Guilin, Guangxi 541004 (China); Wu, Bolin, E-mail: wubolin3211@gmail.com [College of Material Science and Engineering, Guilin University of Technology, Guilin, Guangxi 541004 (China)

2011-12-30

Graphical abstract: Self-glazing red mud based ceramic materials (RMCM) were produced by normal pressure sintering process using the main raw materials of red mud. The properties of the RMCM samples were investigated by the measurements of mechanical properties, radiation measurement, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results show that the self-glazing RMCM have good mechanical properties (water absorption and apparent porosity approached zero; bulk density, 2.94 g/cm{sup 3}; compressive strength, 78.12 MPa). The radiation level has clear change regularity that the radioactivity levels of red mud (6360 Bq) are obvious declined, and can be reduced to that of the natural radioactive background of Guilin Karst landform, China (3600 Bq). It will not only consume large quantities of red mud, but also decrease the production cost of self-glazing RMCM. And the statement of this paper will offer effective ways to reduce the radioactivity level of red mud. Highlights: Black-Right-Pointing-Pointer The self-glazing phenomenon in red mud system was first discovered in our research. Black-Right-Pointing-Pointer Radiation levels of red mud can be reduced efficiently by self-glazing layer. Black-Right-Pointing-Pointer Red mud based ceramic materials will not cause harm to environment and humans. Black-Right-Pointing-Pointer This research possesses important economic significances to aluminum companies. - Abstract: Self-glazing red mud based ceramic materials (RMCM) were produced by normal pressure sintering process using the main raw materials of red mud. The properties of the RMCM samples were investigated by the measurements of mechanical properties, radiation measurement, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results show that the self-glazing RMCM have good mechanical properties (water absorption and apparent porosity approached zero; bulk density, 2.94 g/cm{sup 3}; compressive strength, 78.12 MPa). The radiation

Reduced cost mission design using surrogate models

Science.gov (United States)

Feldhacker, Juliana D.; Jones, Brandon A.; Doostan, Alireza; Hampton, Jerrad

2016-01-01

This paper uses surrogate models to reduce the computational cost associated with spacecraft mission design in three-body dynamical systems. Sampling-based least squares regression is used to project the system response onto a set of orthogonal bases, providing a representation of the ΔV required for rendezvous as a reduced-order surrogate model. Models are presented for mid-field rendezvous of spacecraft in orbits in the Earth-Moon circular restricted three-body problem, including a halo orbit about the Earth-Moon L2 libration point (EML-2) and a distant retrograde orbit (DRO) about the Moon. In each case, the initial position of the spacecraft, the time of flight, and the separation between the chaser and the target vehicles are all considered as design inputs. The results show that sample sizes on the order of 102 are sufficient to produce accurate surrogates, with RMS errors reaching 0.2 m/s for the halo orbit and falling below 0.01 m/s for the DRO. A single function call to the resulting surrogate is up to two orders of magnitude faster than computing the same solution using full fidelity propagators. The expansion coefficients solved for in the surrogates are then used to conduct a global sensitivity analysis of the ΔV on each of the input parameters, which identifies the separation between the spacecraft as the primary contributor to the ΔV cost. Finally, the models are demonstrated to be useful for cheap evaluation of the cost function in constrained optimization problems seeking to minimize the ΔV required for rendezvous. These surrogate models show significant advantages for mission design in three-body systems, in terms of both computational cost and capabilities, over traditional Monte Carlo methods.

A cost/benefit analysis of methods for controlling the release of radioactive materials in the nuclear fuel cycle

International Nuclear Information System (INIS)

Blanco, R.E.; Dahlman, R.C.; Davis, W. Jr.; Finney, B.C.; Groenier, W.S.; Hill, G.S.; Kibbey, A.H.; Kitts, F.G.; Lindauer, R.B.; Moore, R.E.; Pechin, W.H.; Roddy, J.W.; Ryon, A.D.; Seagren, R.D.; Sears, M.B.; Witherspoon, J.P.

1977-01-01

Cost/benefit surveys were made to determine the cost (in dollars) and effectiveness of radwaste treatment systems for decreasing the release of radioactive materials from model fuel cycle facilities, and to determine the benefits in terms of reduction in radiological dose commitment to individuals and populations in the surrounding areas. The studies include milling of uranium ores, conversion of virgin uranium and recycle uranium to UF 6 , fabrication of light-water reactor (LWR) fuels containing enriched uranium or enriched uranium and plutonium, fabrication of high-temperature gas-cooled reactor (HTGR) fuels containing 233 U and thorium, and reprocessing of LWR and HTGR fuels. Conceptual flowsheets were prepared for each model facility illustrating the treatment methods for gaseous and liquid effluents. The ''base'' case represents the lowest treatment cost, current treatment technology, and highest radiological dose. In succeeding cases, increasingly efficient radwaste treatment equipment is added to the ''base'' plant to reduce the amounts of radioactive materials released. The technology ranges from that currently available to that which may be developed over the next 30 years. The status of development for these technologies is discussed. The dose estimates are for maximum individual total body and organ doses at the plant boundary and for population total-body and organ doses out to 89 km. Comparisons of the doses vs annual costs in dollars are presented. In summary, they indicate that (1) the annual doses can be reduced to very low fractions of the natural background dose by the successful development and application of the radwaste treatment methods; and (2) excluding mills, the capital costs for the treatment methods vary from 0.02 to 8% of the capital cost of the base plants and the total annual operating costs (fixed charges plus operating costs) vary from 0.009 to 7.0% of the capital costs for the plant

Reducing Reforestation Costs in Lebanon: Adaptive Field Trials

Directory of Open Access Journals (Sweden)

Garabet (Garo Haroutunian

2017-05-01

Full Text Available Lebanon’s Ministry of Environment initiated a project in 2009 to determine low-cost reforestation techniques for stone pine (Pinus pinea and Lebanon cedar (Cedrus libani for large-scale land rehabilitation activities in the arid Middle East. Irrigation (several techniques vs. no water, planting (8- to 18-month-old seedlings, seeding, and soil preparation methods were evaluated in three sets of adaptive management field trials. The aim was to reduce reforestation costs while still achieving sufficient regeneration. A key result for management was that non-irrigated seed planting of stone pine and possibly of Lebanon cedar showed promise for cost-effective reforestation and could be competitive with seedlings, given correct seed source and planting conditions. Stone pine seeds collected from nearby mother trees and planted without irrigation on sandy soil showed 35% survival for <600 USD/ha; seedlings planted without irrigation cost about 2500 USD/ha and achieved 50–70% survival (costs based on 800 seedlings/ha. Water supplements increased establishment costs over 2 years without concomitant improvements to survival. Future studies should evaluate how soil texture and soil preparation interact with other factors to affect seed germination and survival for each species.

Investing in CenteringPregnancy™ Group Prenatal Care Reduces Newborn Hospitalization Costs.

Science.gov (United States)

Crockett, Amy; Heberlein, Emily C; Glasscock, Leah; Covington-Kolb, Sarah; Shea, Karen; Khan, Imtiaz A

CenteringPregnancy™ group prenatal care is an innovative model with promising evidence of reducing preterm birth. The outpatient costs of offering CenteringPregnancy pose barriers to model adoption. Enhanced provider reimbursement for group prenatal care may improve birth outcomes and generate newborn hospitalization cost savings for insurers. To investigate potential cost savings for investment in CenteringPregnancy, we evaluated the impact on newborn hospital admission costs of a pilot incentive project, where BlueChoice Health Plan South Carolina Medicaid managed care organization paid an obstetric practice offering CenteringPregnancy $175 for each patient who participated in at least five group prenatal care sessions. Using a one to many case-control matching without replacement, each CenteringPregnancy participant was matched retrospectively on propensity score, age, race, and clinical risk factors with five individual care participants. We estimated the odds of newborn hospital admission type (neonatal intensive care unit [NICU] or well-baby admission) for matched CenteringPregnancy and individual care cohorts with four or more visits using multivariate logistic regression. Cost savings were calculated using mean costs per admission type at the delivery hospital. Of the CenteringPregnancy newborns, 3.5% had a NICU admission compared with 12.0% of individual care newborns (p Investing in CenteringPregnancy for 85 patients ($14,875) led to an estimated net savings for the managed care organization of $67,293 in NICU costs. CenteringPregnancy may reduce costs through fewer NICU admissions. Enhanced reimbursement from payers to obstetric practices supporting CenteringPregnancy sustainability may improve birth outcomes and reduce associated NICU costs. Copyright © 2016 Jacobs Institute of Women's Health. Published by Elsevier Inc. All rights reserved.

Spatial analyses of cost efficient measures to reduce N-leaching

DEFF Research Database (Denmark)

Jacobsen, Brian H.; Abildtrup, Jens; Ørum, Jens Erik

(WFD). The analysis shows that the geographical position of the measures are very important in order to achieve the expected nutrient reduction. The current income varies a lot in the River basin and this might influence the choice of cost effective measures to reduce nutrient load. Furthermore a close......The Nitrate Directive has only been implemented satisfactorily in a few EU countries. The Commission have accepted the Danish implementation of the directive based on the Plan for the Aquatic Environment II. The costs of this plan has been calculated to 70 million € or 2,0 € per kg N in reduced...... leaching. The farmers have paid 60% of the costs. The paper then describes an example of a regional analysis covering the River Basin of Ringkøbing Fjord in Denmark, which indicates the type of calculations needed to find the measures and costs in order to comply with parts of the Water Framework Directive...

Comparing surgical trays with redundant instruments with trays with reduced instruments: a cost analysis.

Science.gov (United States)

John-Baptiste, A; Sowerby, L J; Chin, C J; Martin, J; Rotenberg, B W

2016-01-01

When prearranged standard surgical trays contain instruments that are repeatedly unused, the redundancy can result in unnecessary health care costs. Our objective was to estimate potential savings by performing an economic evaluation comparing the cost of surgical trays with redundant instruments with surgical trays with reduced instruments ("reduced trays"). We performed a cost-analysis from the hospital perspective over a 1-year period. Using a mathematical model, we compared the direct costs of trays containing redundant instruments to reduced trays for 5 otolaryngology procedures. We incorporated data from several sources including local hospital data on surgical volume, the number of instruments on redundant and reduced trays, wages of personnel and time required to pack instruments. From the literature, we incorporated instrument depreciation costs and the time required to decontaminate an instrument. We performed 1-way sensitivity analyses on all variables, including surgical volume. Costs were estimated in 2013 Canadian dollars. The cost of redundant trays was $21 806 and the cost of reduced trays was $8803, for a 1-year cost saving of $13 003. In sensitivity analyses, cost savings ranged from $3262 to $21 395, based on the surgical volume at the institution. Variation in surgical volume resulted in a wider range of estimates, with a minimum of $3253 for low-volume to a maximum of $52 012 for high-volume institutions. Our study suggests moderate savings may be achieved by reducing surgical tray redundancy and, if applied to other surgical specialties, may result in savings to Canadian health care systems.

CANDU 9 - reducing capital costs through advanced construction

International Nuclear Information System (INIS)

Hedges, K.; Yu, S.; Hopwood, J.

1996-01-01

Reducing costs is a clear priority in nuclear markets where capital reaches billions and financing is hard-won. To address that priority, AECL introduced the use of advanced construction techniques. This has been one of the key thrusts behind its development of CANDU 9. (author)

Reducing patient drug acquisition costs can lower diabetes health claims.

Science.gov (United States)

Mahoney, John J

2005-08-01

Concerned about rising prevalence and costs of diabetes among its employees, Pitney Bowes Inc recently revamped its drug benefit design to synergize with ongoing efforts in its disease management and patient education programs. Specifically, based on a predictive model showing that low medication adherence was linked to subsequent increases in healthcare costs in patients with diabetes, the company shifted all diabetes drugs and devices from tier 2 or 3 formulary status to tier 1. The rationale was that reducing patient out-of-pocket costs would eliminate financial barriers to preventive care, and thereby increase adherence, reduce costly complications, and slow the overall rate of rising healthcare costs. This single change in pharmaceutical benefit design immediately made critical brand-name drugs available to most Pitney Bowes employees and their covered dependents for 10% coinsurance, the same coinsurance level as for generic drugs, versus the previous cost share of 25% to 50%. After 2 to 3 years, preliminary results in plan participants with diabetes indicate that medication possession rates have increased significantly, use of fixed-combination drugs has increased (possibly related to easier adherence), average total pharmacy costs have decreased by 7%, and emergency department visits have decreased by 26%. Hospital admission rates, although increasing slightly, remain below the demographically adjusted Medstat benchmark. Overall direct healthcare costs per plan participant with diabetes decreased by 6%. In addition, the rate of increase in overall per-plan-participant health costs at Pitney Bowes has slowed markedly, with net per-plan-participant costs in 2003 at about 4000 dollars per year versus 6500 dollars for the industry benchmark. This recent moderation in overall corporate health costs may be related to these strategic changes in drug benefit design for diabetes, asthma, and hypertension and also to ongoing enhancements in the company's disease

Control Analysis Of Tobacco Raw Material Supplies Using Eoq Method Economic Order Quantity To Reach Efficiency Total Costs Of Raw Material In Pr. Sukun

Directory of Open Access Journals (Sweden)

Wiwik Sudarwati

2017-07-01

Full Text Available The raw material inventory control system determines and guarantees the availability of raw material stock in the right quantity quality and timing. The problem in this research is the procurement of raw materials of tobacco. PR. Sukun still often experiences the excess. This is related to the frequency of raw material purchases and the quantity of raw material purchases which can lead to waste of working capital embedded in raw material inventory raw material ordering costs and raw material storage costs. The purpose of this research is to know how to make an efficiency level in procurement of raw material inventory between EOQ method compared with policy of PR. Sukun. The type of research used is analytic descriptive type. Data analysis begins by analyzing raw material quantity comparison total raw material inventory cost and raw material cost between PR Sukun policy with EOQ method. Based on the results of research known that by using EOQ method can be much more efficient compared to policy of PR. Sukun. The quantity and frequency of purchasing raw materials is less but still take into account the safety stock and reorder point so the production process is not disturbed. In addition the cost of purchasing ordering costs and raw materials storage costs less so as to create efficiencies on the cost of raw materials inventory. PR. Sukun in the procurement of raw material inventory should use EOQ method to be more efficient and take into account the safety stock and reorder point to avoid the inventory excess of raw materials.

Concepts of increasing productivity and reducing the processing cost of machine parts

Directory of Open Access Journals (Sweden)

О. С. Кленов

2017-06-01

Full Text Available The basic conditions to reduce the cost of processing technology and improve productivity through the use of modern cutting tools produced by leading foreign firms producing tools have been appraised from theory in the work. Theoretically, it has been found that an increase in the cost of processing varies according to extremum dependence, passing the minimum point. It is possible to reduce the minimum processing cost due to the increase of productivity using cutting edge tools, characterized by a high capacity for work in high cutting temperatures. The criterion showing the technological price cost minimum is the ratio of the expenditures on workers’ wages to the expenditures on the cutting tools, it being quite specific for various processing conditions. To analyze the possibilities of practical use of the proposed criterion, a complex of experimental researches of the technological prime cost and productivity of the processing with hard alloy cutting tools with wear-resistant coatings produced by the company «Iscar» has been carried out. It has been established that their use makes it possible by more than one half to reduce the labour consumption and overall costs as compared to the hard alloy cutting tools traditionally used in home industry. It has been shown that this effect is achieved by increasing the cutting speed and feed due to increased wear resistance and heat resistance of the «Iscar» company tools. It was established that it is much more possible to achieve low processing cost at milling than at turning. It was stated with regard to all major expenditures including the workers' wages, the cost of the cutting tools, equipment and other costs, allowing more correctly estimate the cost-effectiveness of mechanical processing. Experiments confirmed that the main condition for reducing the processing cost to its minimum value is to increase the processing performance through the use of a heat-resistant and wear-resistant cutting

The costs, benefits, and cost-effectiveness of interventions to reduce maternal morbidity and mortality in Mexico.

Directory of Open Access Journals (Sweden)

Delphine Hu

Full Text Available BACKGROUND: In Mexico, the lifetime risk of dying from maternal causes is 1 in 370 compared to 1 in 2,500 in the U.S. Although national efforts have been made to improve maternal services in the last decade, it is unclear if Millennium Development Goal 5--to reduce maternal mortality by three-quarters by 2015--will be met. METHODOLOGY/PRINCIPAL FINDINGS: We developed an empirically calibrated model that simulates the natural history of pregnancy and pregnancy-related complications in a cohort of 15-year-old women followed over their lifetime. After synthesizing national and sub-national trends in maternal mortality, the model was calibrated to current intervention-specific coverage levels and validated by comparing model-projected life expectancy, total fertility rate, crude birth rate and maternal mortality ratio with Mexico-specific data. Using both published and primary data, we assessed the comparative health and economic outcomes of alternative strategies to reduce maternal morbidity and mortality. A dual approach that increased coverage of family planning by 15%, and assured access to safe abortion for all women desiring elective termination of pregnancy, reduced mortality by 43% and was cost saving compared to current practice. The most effective strategy added a third component, enhanced access to comprehensive emergency obstetric care for at least 90% of women requiring referral. At a national level, this strategy reduced mortality by 75%, cost less than current practice, and had an incremental cost-effectiveness ratio of $300 per DALY relative to the next best strategy. Analyses conducted at the state level yielded similar results. CONCLUSIONS/SIGNIFICANCE: Increasing the provision of family planning and assuring access to safe abortion are feasible, complementary and cost-effective strategies that would provide the greatest benefit within a short-time frame. Incremental improvements in access to high-quality intrapartum and emergency

Reducing risk and accelerating delivery of a neutron source for fusion materials research

Energy Technology Data Exchange (ETDEWEB)

Surrey, E., E-mail: Elizabeth.Surrey@ccfe.ac.uk [EURATOM/CCFE, Abingdon OX14 3DB (United Kingdom); Porton, M. [EURATOM/CCFE, Abingdon OX14 3DB (United Kingdom); Davenne, T.; Findlay, D.; Letchford, A.; Thomason, J. [STFC Rutherford Appleton Laboratory, Harwell OX11 0QX (United Kingdom); Roberts, S.G.; Marrow, J.; Seryi, A. [University of Oxford, Oxford OX1 3DP (United Kingdom); Connolly, B. [University of Birmingham, Edgbaston B15 2TT (United Kingdom); Owen, H. [University of Manchester, Manchester M13 9PL (United Kingdom)

2014-04-15

Highlights: • Proposed neutron source for fusion materials – FAFNIR – n(d,C) stripping source. • Near term technology, reduces risk compared with IFMIF, timely data production. • Technical, economic and programme needs assessed, compatible with EU Roadmap proposals. • Safety case impacts regulatory role for source, now mainly stakeholder insurance. - Abstract: The materials engineering database relevant to fusion irradiation is poorly populated and it has long been recognized that a fusion spectrum neutron source will be required, the facility IFMIF being the present proposal. Re-evaluation of the regulatory approach for the EU proposed DEMO device shows that the purpose of the source can be changed from lifetime equivalent irradiation exposure to data generation at lower levels of exposure by adopting a defence in depth strategy and regular component surveillance. This reduces the specification of the source with respect to IFMIF allowing lower risk technology solutions to be considered. A description of such a source, the Facility for Fusion Neutron Irradiation Research, FAFNIR, is presented here along with project timescales and costs.

Use of commercial grade item dedication to reduce procurement costs

International Nuclear Information System (INIS)

Rosch, F.

1995-01-01

In the mid-1980s, the Nuclear Regulatory Industry (NRC) began inspecting utility practices of procuring and dedicating commercial grade items intended for plant safety-related applications. As a result of the industry efforts to address NRC concerns, nuclear utilities have enhanced existing programs and procedures for dedication of commercial grade items. Though these programs were originally enhanced to meet NRC concerns, utilities have discovered that the dedication of commercial grade items can also reduce overall procurement costs. This paper will discuss the enhancement of utility dedication programs and demonstrates how utilities have utilized them to reduce procurement costs

A Summary of: 25 Ways to Reduce the Cost of College

Science.gov (United States)

Center for College Affordability and Productivity (NJ1), 2010

2010-01-01

Almost everyone agrees that colleges have become costly to attend and are a growing burden on society to finance. Rising tuition costs threaten the ability and desire of students to attend college. Are there things that can be done to significantly reduce the cost of college? The answer is an emphatic "yes." The Center for College Affordability…

Offshore windfarm proposal to reduce costs of foundations and installations.

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-09-04

The principle aim of this project is to develop innovative pile insertion, installation vessel pile handling and pile transfer systems that reduce the installed cost per kW of offshore wind turbine foundation installation. The project was to accomplish this by first developing a novel method of handling foundation piles without the use of craneage thereby allowing long piles of 5-6m diameter to be lifted safely in shallow water. This would extend the operating envelope by allowing work to continue without the weather constraints associated with lifting heavy loads by crane. The method would eventually reduce the size of the pile installation barge resulting in reduced installation costs. This part of the project has been satisfactorily completed, resulting in an innovative pile handling technique. Secondly a nonpercussive pile insertion method would be developed suitable for large diameter piles. The targeted aims of this method are as follows: To reduce or negate the need to handle and dispose of large amounts of spoil. To eliminate the need for piling hammers large enough to drive 6m diameter piles. These would be too heavy for the present generation of offshore cranes to lift, and the rental costs exorbitant. The advantages of these aims are: A reduction in the noise pollution produced by all percussive methods of pile driving and in particular large hammers. These noise levels are unacceptable to present and future environmental constraints. Because of the reduced drill spoil being handled compared to an industry standard full face drill, the energy consumption and therefore cost, is also reduced. Owing to the high cost and risk associated with mobilising and operating the equipment necessary for field trials in a marine environment (the cost for mobilising and operating a construction jack-up barge, all backup marine support craft, pile driving hammers and test piles can be several times the available grant funding), it was decided and agreed at an early stage

Reducing the energy penalty costs of postcombustion CCS systems with amine-storage.

Science.gov (United States)

Patiño-Echeverri, Dalia; Hoppock, David C

2012-01-17

Carbon capture and storage (CCS) can significantly reduce the amount of CO(2) emitted from coal-fired power plants but its operation significantly reduces the plant's net electrical output and decreases profits, especially during times of high electricity prices. An amine-based CCS system can be modified adding amine-storage to allow postponing 92% of all its energy consumption to times of lower electricity prices, and in this way has the potential to effectively reduce the cost of CO(2) capture by reducing the costs of the forgone electricity sales. However adding amine-storage to a CCS system implies a significant capital cost that will be outweighed by the price-arbitrage revenue only if the difference between low and high electricity prices is substantial. In this paper we find a threshold for the variability in electricity prices that make the benefits from electricity price arbitrage outweigh the capital costs of amine-storage. We then look at wholesale electricity markets in the Eastern Interconnect of the United States to determine profitability of amine-storage systems in this region. Using hourly electricity price data from years 2007 and 2008 we find that amine storage may be cost-effective in areas with high price variability.

Reducing the cost of MWT module technology based on conductive back-sheet foils

Energy Technology Data Exchange (ETDEWEB)

Bennett, I.J.; Goris, M.J.A.A.; Eerenstein, W. [ECN Solar Energy, P.O. Box 1, 1755 ZG Petten (Netherlands)

2013-10-15

MWT cell and module technology has shown to result in modules with a higher power output than H-pattern modules and to be suitable for use with thin and fragile cells. In this work, the use of low-cost module materials and their effect on module performance and reliability has been assessed. These materials include a conductive back-sheet patterned by milling with no silver plating at the contacts on the foil and no isolation coating on the copper and a low-silver content conductive adhesive. The sensitivity of module performance for the anti-corrosion coating on the copper of the conductive back-sheet is measured, as is the reliability in climate chamber testing of mini-modules made with these materials. The results show that these low cost materials can be used to manufacture module with good performance and reliability. Options are given for further cost reduction.

Comparison of low-cost and engineered materials for phosphorus removal from organic-rich surface water.

Science.gov (United States)

Boyer, Treavor H; Persaud, Amar; Banerjee, Poulomi; Palomino, Pedro

2011-10-15

Excess phosphorus (P) in lakes and rivers remains a major water quality problem on a global scale. As a result, new materials and innovative approaches to P remediation are required. Natural materials and waste byproduct materials from industrial processes have the potential to be effective materials for P removal from surface water. Advantages of natural and waste byproduct materials include their low-cost, abundant supply, and minimal preparation, especially compared with engineered materials, such as ion exchange resins and polymeric adsorbents. As a result, natural and waste byproduct materials are commonly referred to as low-cost materials. Despite the potential advantages of low-cost materials, there are critical gaps in knowledge that are preventing their effective use. In particular, there are limited data on the performance of low-cost materials in surface waters that have high concentrations of natural organic matter (NOM), and there are no systematic studies that track the changes in water chemistry following treatment with low-cost materials or compare their performance with engineered materials. Accordingly, the goal of this work was to evaluate and compare the effectiveness of low-cost and engineered materials for P removal from NOM-rich surface water. Seven low-cost materials and three engineered materials were evaluated using jar tests and mini-column experiments. The test water was a surface water that had a total P concentration of 132-250 μg P/L and a total organic carbon concentration of 15-32 mg C/L. Alum sludge, a byproduct of drinking water treatment, and a hybrid anion exchange resin loaded with nanosize iron oxide were the best performing materials in terms of selective P removal in the presence of NOM and minimum undesirable secondary changes to the water chemistry. Copyright © 2011 Elsevier Ltd. All rights reserved.

SIR (Safe Integral Reactor) - reducing size can reduce cost

International Nuclear Information System (INIS)

Hayns, M.R.

1991-01-01

Traditional engineering economics have favoured the advantages of larger size as a means of reducing specific capital costs and hence unit generating costs. For large and small plants utilising the same concept, e.g. a small four-loop PWR vs a large four-loop PWR with the same number of components, economies of scale are well established. If, however, a smaller plant is sized to take advantage of features which are only feasible at smaller outputs, is of simpler design, with the advantage taken of the simplified design to produce the most cost-effective layout, and incorporates fewer, more easily replaceable components with minimal assembly on site, it is possible to produce a plant which is competitive with larger plant of more traditional design. When 'system' effects, such as better matching of installed capacity to the growth in demand and the fact that a smaller total capacity will be needed to meet a given demand with a specified level of confidence, are taken into account, it can be shown that a utility's overall cash-flow position can be improved with lower associated absolute financial risks. The UK/US Safe Integral Reactor (SIR) is an integral pressurized water reactor in the 300-400 MW(e) range which utilises conventional water reactor technology in a way not feasible at the very large, sizes of recent years. The SIR concept is briefly explained and its technical and economic advantages in terms of simplicity, construction, maintenance, availability, decommissioning, safety and siting described. The results of system analyses which demonstrate the overall financial advantages to a utility are presented. (author)

Subsea industry implements NORSOK: Happy marriages reduce costs

International Nuclear Information System (INIS)

Heggelund, N.

1995-01-01

Cost reduction by implementing NORSOK standards and cooperation between subsea suppliers to the Norwegian continental shelf, are discussed in this article. The aim of NORSOK, which is based on US standards, is to achieve standardization of technical requirements for drilling and production facilities, to identify and develop common requirements for equipment and installations, based on functional specifications, interfaces and limited variety for equipment and design, and to take into consideration existing industry standards and use these where possible. The offspring of cooperation is notable cost reductions. Subsea costs at Saga's Vigdis field have been reduced by 50% in two years. More subsea projects could come up soon. Norsk Hydro has short-listed a semi PDQ (Processing, Drilling and living Quarters), a ship or Gullfaks tie-in as runner-up concepts for the Viksund project. 1 fig

Cost implications of reduced work hours and workloads for resident physicians.

Science.gov (United States)

Nuckols, Teryl K; Bhattacharya, Jay; Wolman, Dianne Miller; Ulmer, Cheryl; Escarce, José J

2009-05-21

Although the Accreditation Council for Graduate Medical Education (ACGME) limits the work hours of residents, concerns about fatigue persist. A new Institute of Medicine (IOM) report recommends, among other changes, improved adherence to the 2003 ACGME limits, naps during extended shifts, a 16-hour limit for shifts without naps, and reduced workloads. We used published data to estimate labor costs associated with transferring excess work from residents to substitute providers, and we examined the effects of our assumptions in sensitivity analyses. Next, using a probability model to represent labor costs as well as mortality and costs associated with preventable adverse events, we determined the net costs to major teaching hospitals and cost-effectiveness across a range of hypothetical changes in the rate of preventable adverse events. Annual labor costs from implementing the IOM recommendations were estimated to be $1.6 billion (in 2006 U.S. dollars) across all ACGME-accredited programs ($1.1 billion to $2.5 billion in sensitivity analyses). From a 10% decrease to a 10% increase in preventable adverse events, net costs per admission ranged from $99 to $183 for major teaching hospitals and from $17 to $266 for society. With 2.5% to 11.3% decreases in preventable adverse events, costs to society per averted death ranged from $3.4 million to $0. Implementing the four IOM recommendations would be costly, and their effectiveness is unknown. If highly effective, they could prevent patient harm at reduced or no cost from the societal perspective. However, net costs to teaching hospitals would remain high. 2009 Massachusetts Medical Society

Cost effectiveness of reducing radon exposure in Spanish dwellings

International Nuclear Information System (INIS)

Colgan, P.A.; Gutierrez, J.

1996-01-01

Published information on the distribution of radon levels in Spanish single family dwellings is used to evaluate the cost-effectiveness of three different intervention scenarios: remediation of existing dwellings, radon proofing of all future dwellings and the targetting of areas with higher than average indoor radon concentrations. Analysis is carried out on the basis of a Reference Level of 400 Bq m -3 for the existing housing stock and 200 Bq m -3 for new dwellings. Certain assumptions are made about the effectiveness and durability of the measures applied and annualised costs are used to calculate the costs per lung cancer death averted. The results reveal that targetting future housing is a more cost-effective option than remediation of existing dwellings with radon concentrations above the Reference Level -the costs per lung cancer death averted are typically $145000. In high-risk areas, these costs can be considerably less, depending on the percentage of dwellings expected to exceed the Reference Level and the average savings in exposure as a result of the intervention. The costs of intervention to reduce lung cancer deaths following exposure to radon compare favourably with those of other health programmes in other countries. (Author)

A cost-benefit analysis of landfill mining and material recycling in China

International Nuclear Information System (INIS)

Zhou, Chuanbin; Gong, Zhe; Hu, Junsong; Cao, Aixin; Liang, Hanwen

2015-01-01

Highlights: • Assessing the economic feasibility of landfill mining. • We applied a cost-benefit analysis model for landfill mining. • Four material cycling and energy recovery scenarios were designed. • We used net present value to evaluate the cost-benefit efficiency. - Abstract: Landfill mining is an environmentally-friendly technology that combines the concepts of material recycling and sustainable waste management, and it has received a great deal of worldwide attention because of its significant environmental and economic potential in material recycling, energy recovery, land reclamation and pollution prevention. This work applied a cost-benefit analysis model for assessing the economic feasibility, which is important for promoting landfill mining. The model includes eight indicators of costs and nine indicators of benefits. Four landfill mining scenarios were designed and analyzed based on field data. The economic feasibility of landfill mining was then evaluated by the indicator of net present value (NPV). According to our case study of a typical old landfill mining project in China (Yingchun landfill), rental of excavation and hauling equipment, waste processing and material transportation were the top three costs of landfill mining, accounting for 88.2% of the total cost, and the average cost per unit of stored waste was 12.7 USD ton −1 . The top three benefits of landfill mining were electricity generation by incineration, land reclamation and recycling soil-like materials. The NPV analysis of the four different scenarios indicated that the Yingchun landfill mining project could obtain a net positive benefit varying from 1.92 million USD to 16.63 million USD. However, the NPV was sensitive to the mode of land reuse, the availability of energy recovery facilities and the possibility of obtaining financial support by avoiding post-closure care

A cost-benefit analysis of landfill mining and material recycling in China

Energy Technology Data Exchange (ETDEWEB)

Zhou, Chuanbin, E-mail: cbzhou@rcees.ac.cn; Gong, Zhe; Hu, Junsong; Cao, Aixin; Liang, Hanwen

2015-01-15

Highlights: • Assessing the economic feasibility of landfill mining. • We applied a cost-benefit analysis model for landfill mining. • Four material cycling and energy recovery scenarios were designed. • We used net present value to evaluate the cost-benefit efficiency. - Abstract: Landfill mining is an environmentally-friendly technology that combines the concepts of material recycling and sustainable waste management, and it has received a great deal of worldwide attention because of its significant environmental and economic potential in material recycling, energy recovery, land reclamation and pollution prevention. This work applied a cost-benefit analysis model for assessing the economic feasibility, which is important for promoting landfill mining. The model includes eight indicators of costs and nine indicators of benefits. Four landfill mining scenarios were designed and analyzed based on field data. The economic feasibility of landfill mining was then evaluated by the indicator of net present value (NPV). According to our case study of a typical old landfill mining project in China (Yingchun landfill), rental of excavation and hauling equipment, waste processing and material transportation were the top three costs of landfill mining, accounting for 88.2% of the total cost, and the average cost per unit of stored waste was 12.7 USD ton{sup −1}. The top three benefits of landfill mining were electricity generation by incineration, land reclamation and recycling soil-like materials. The NPV analysis of the four different scenarios indicated that the Yingchun landfill mining project could obtain a net positive benefit varying from 1.92 million USD to 16.63 million USD. However, the NPV was sensitive to the mode of land reuse, the availability of energy recovery facilities and the possibility of obtaining financial support by avoiding post-closure care.

Analysis of the influence of advanced materials for aerospace products R&D and manufacturing cost

Science.gov (United States)

Shen, A. W.; Guo, J. L.; Wang, Z. J.

2015-12-01

In this paper, we pointed out the deficiency of traditional cost estimation model about aerospace products Research & Development (R&D) and manufacturing based on analyzing the widely use of advanced materials in aviation products. Then we put up with the estimating formulas of cost factor, which representing the influences of advanced materials on the labor cost rate and manufacturing materials cost rate. The values ranges of the common advanced materials such as composite materials, titanium alloy are present in the labor and materials two aspects. Finally, we estimate the R&D and manufacturing cost of F/A-18, F/A- 22, B-1B and B-2 aircraft based on the common DAPCA IV model and the modified model proposed by this paper. The calculation results show that the calculation precision improved greatly by the proposed method which considering advanced materials. So we can know the proposed method is scientific and reasonable.

Can E-Filing Reduce Tax Compliance Costs in Developing Countries?

OpenAIRE

Yilmaz, Fatih; Coolidge, Jacqueline

2013-01-01

The purpose of this study is to investigate the association between electronic filing (e-filing) and the total tax compliance costs incurred by small and medium size businesses in developing countries, based on survey data from South Africa, Ukraine, and Nepal. A priori, most observers expect that use of e-filing should reduce tax compliance costs, but this analysis suggests that the assum...

Calculation of coal power plant cost on agricultural and material building impact of emission

International Nuclear Information System (INIS)

Mochamad Nasrullah; Wiku Lulus Widodo

2016-01-01

Calculation for externally cost of Coal Power Plant (CPP) is very important. This paper is focus on CPP appear SO 2 impact on agricultural plant and material building. AGRIMAT'S model from International Atomic Energy Agency is model one be used to account environmental damage for air impact because SO 2 emission. Analysis method use Impact Pathways Assessment: Determining characteristic source, Exposure Response Functions (ERF), Impacts and Damage Costs, and Monetary Unit Cost. Result for calculate shows that SO 2 that issued CPP, if value of SO 2 is 19,3 μg/m3, damage cost begins valuably positive. It shows that the land around CPP has decrease prosperity, and it will disadvantage for agricultural plant. On material building, SO 2 resulting damage cost. The increase humidity price therefore damage cost on material building will increase cost. But if concentration SO 2 increase therefore damage cost that is appear on material building decrease. Expected this result can added with external cost on health impact of CPP. External cost was done at developed countries. If it is done at Indonesia, therefore generation cost with fossil as more expensive and will get implication on issue cut back gases greenhouse. On the other side, renewable energy and also alternative energy as nuclear have opportunity at national energy mix system. (author)

Decommissioning Programme Management: reducing risk and cost while accelerating schedules through improved planning, Earned Value Management and safe work execution

International Nuclear Information System (INIS)

Hansen, S.E.

2008-01-01

CH2M HILL experience includes more than two decades of managing nuclear facilities and providing clean-up and operations support for commercial and government facilities worldwide. Our expertise ranges from decommissioning and defence sector businesses to nuclear technology development and innovation. Our approach places top priority on the safe execution of work while reducing both risk and cost. Our nuclear services include: programme management, nuclear safety analysis, radiological protection, radioactive waste management, nuclear remediation, nuclear materials and waste transportation management, nuclear safeguards and security services, and nuclear decontamination and decommissioning. This paper will discuss our approach which has resulted in a strong track record of accelerating schedules and reducing costs of major nuclear programmes, including Rocky Flats, Idaho, and our work at UKAEA sites. (author)

Materials and electricity

International Nuclear Information System (INIS)

Jaffee, R.I.

1986-01-01

Despite an increase in the intensity of electricity usage, electricity has been reversing its historical trend of reduced cost since 1970 to the point where costs are increasing faster than inflation. Designers and operators on both sides of the meter and the developers of materials from which the electric system is constructed must contribute to the lowering of costs and an increase in reliability for the generation, transmission and distribution, and utilization of electricity. Four specific cases illustrate the role of materials/process improvements to this end. The examples highlight the use of forged or welded integral rotors, improvements in the heat rate of coal-fired plants through higher steam conditions and reduced heat losses, reduced losses through amorphous steel cores for transformers, and reduced ac electric motor losses through silicon variable speed drives. 37 references, 27 figures, 9 tables

Reducing Wildlife Damage with Cost-Effective Management Programmes.

Directory of Open Access Journals (Sweden)

Cheryl R Krull

Full Text Available Limiting the impact of wildlife damage in a cost effective manner requires an understanding of how control inputs change the occurrence of damage through their effect on animal density. Despite this, there are few studies linking wildlife management (control, with changes in animal abundance and prevailing levels of wildlife damage. We use the impact and management of wild pigs as a case study to demonstrate this linkage. Ground disturbance by wild pigs has become a conservation issue of global concern because of its potential effects on successional changes in vegetation structure and composition, habitat for other species, and functional soil properties. In this study, we used a 3-year pig control programme (ground hunting undertaken in a temperate rainforest area of northern New Zealand to evaluate effects on pig abundance, and patterns and rates of ground disturbance and ground disturbance recovery and the cost effectiveness of differing control strategies. Control reduced pig densities by over a third of the estimated carrying capacity, but more than halved average prevailing ground disturbance. Rates of new ground disturbance accelerated with increasing pig density, while rates of ground disturbance recovery were not related to prevailing pig density. Stochastic simulation models based on the measured relationships between control, pig density and rate of ground disturbance and recovery indicated that control could reduce ground disturbance substantially. However, the rate at which prevailing ground disturbance was reduced diminished rapidly as more intense, and hence expensive, pig control regimes were simulated. The model produced in this study provides a framework that links conservation of indigenous ecological communities to control inputs through the reduction of wildlife damage and suggests that managers should consider carefully the marginal cost of higher investment in wildlife damage control, relative to its marginal conservation

Predictive models reduce talent development costs in female gymnastics.

Science.gov (United States)

Pion, Johan; Hohmann, Andreas; Liu, Tianbiao; Lenoir, Matthieu; Segers, Veerle

2017-04-01

This retrospective study focuses on the comparison of different predictive models based on the results of a talent identification test battery for female gymnasts. We studied to what extent these models have the potential to optimise selection procedures, and at the same time reduce talent development costs in female artistic gymnastics. The dropout rate of 243 female elite gymnasts was investigated, 5 years past talent selection, using linear (discriminant analysis) and non-linear predictive models (Kohonen feature maps and multilayer perceptron). The coaches classified 51.9% of the participants correct. Discriminant analysis improved the correct classification to 71.6% while the non-linear technique of Kohonen feature maps reached 73.7% correctness. Application of the multilayer perceptron even classified 79.8% of the gymnasts correctly. The combination of different predictive models for talent selection can avoid deselection of high-potential female gymnasts. The selection procedure based upon the different statistical analyses results in decrease of 33.3% of cost because the pool of selected athletes can be reduced to 92 instead of 138 gymnasts (as selected by the coaches). Reduction of the costs allows the limited resources to be fully invested in the high-potential athletes.

Cost analysis in interventional radiology-A tool to optimize management costs

International Nuclear Information System (INIS)

Clevert, D.-A.; Stickel, M.; Jung, E.M.; Reiser, M.; Rupp, N.

2007-01-01

Objective: The objective of the study was to analyze the methods to reduce cost in interventional radiology departments by reorganizing procurement. Materials and methods: All products used in Department of Interventional Radiology were inventoried. An ABC-analysis was completed and A-products (high-value and high turnover products) underwent a XYZ-analysis which predicted demand on the basis of ordering frequency. Then criteria for a procurement strategy for the different material categories were fixed. The net working capital (NWC) was calculated using an interest rate of 8%/year. Results: Total annual material turnover was 353,000 Euro . The value of all A-products determined by the inventory was 260,000 Euro . Changes in the A-product procurement strategy tapped a cost reduction potential of 14,500/year Euro . The resulting total saving was 17,200 Euro . Improved stores management added another 37,500 Euro. The total cost cut of 52,000 Euro is equivalent to 14.7% of annual expenses. Conclusion: A flexible procurement strategy helps to reduce the storage and capital tie-up costs of A-products in interventional radiology without affecting the quality of service provided to patients

Cost-effectiveness of reducing emissions from tropical deforestation, 2016-2050

Science.gov (United States)

Busch, Jonah; Engelmann, Jens

2017-12-01

Reducing tropical deforestation is potentially a large-scale and low-cost strategy for mitigating climate change. Yet previous efforts to project the cost-effectiveness of policies to reduce greenhouse gas emissions from future deforestation across the tropics were hampered by crude available data on historical forest loss. Here we use recently available satellite-based maps of annual forest loss between 2001-2012, along with information on topography, accessibility, protected status, potential agricultural revenue, and an observed inverted-U-shaped relationship between forest cover loss and forest cover, to project tropical deforestation from 2016-2050 under alternative policy scenarios and to construct new marginal abatement cost curves for reducing emissions from tropical deforestation. We project that without new forest conservation policies 289 million hectares of tropical forest will be cleared from 2016-2050, releasing 169 GtCO2. A carbon price of US20/tCO2 (50/tCO2) across tropical countries would avoid 41 GtCO2 (77 GtCO2) from 2016-2050. By comparison, we estimate that Brazil’s restrictive policies in the Amazon between 2004-2012 successfully decoupled potential agricultural revenue from deforestation and reduced deforestation by 47% below what would have otherwise occurred, preventing the emission of 5.2 GtCO2. All tropical countries enacting restrictive anti-deforestation policies as effective as those in the Brazilian Amazon between 2004-2012 would avoid 58 GtCO2 from 2016-2050.

Small Habitat Commonality Reduces Cost for Human Mars Missions

Science.gov (United States)

Griffin, Brand N.; Lepsch, Roger; Martin, John; Howard, Robert; Rucker, Michelle; Zapata, Edgar; McCleskey, Carey; Howe, Scott; Mary, Natalie; Nerren, Philip (Inventor)

2015-01-01

Most view the Apollo Program as expensive. It was. But, a human mission to Mars will be orders of magnitude more difficult and costly. Recently, NASA's Evolvable Mars Campaign (EMC) mapped out a step-wise approach for exploring Mars and the Mars-moon system. It is early in the planning process but because approximately 80% of the total life cycle cost is committed during preliminary design, there is an effort to emphasize cost reduction methods up front. Amongst the options, commonality across small habitat elements shows promise for consolidating the high bow-wave costs of Design, Development, Test and Evaluation (DDT&E) while still accommodating each end-item's functionality. In addition to DDT&E, there are other cost and operations benefits to commonality such as reduced logistics, simplified infrastructure integration and with inter-operability, improved safety and simplified training. These benefits are not without a cost. Some habitats are sub-optimized giving up unique attributes for the benefit of the overall architecture and because the first item sets the course for those to follow, rapidly developing technology may be excluded. The small habitats within the EMC include the pressurized crew cabins for the ascent vehicle,

DOES ECO-EFFICENCY REDUCE THE COST OF EQUITY CAPITAL? EMPIRICAL EVIDENCE FROM INDONESIA

OpenAIRE

Lisa Alviani; Mahfud Sholihin

2015-01-01

The objective of this study is to examine the effect of eco-efficiency on the cost of equity capital. The study hypothesizes that the implementation of eco-efficiency reduces the cost of equity capital. Using manufacturing companies listed on the Indonesian Stock Exchange for the period 2010-2012 as data, and controlling for beta, company size, Book to Market ratio, and leverage; the study finds that the implementation of eco-efficiency may reduce the cost of equity capital. The findings sugg...

Reducing electrocoagulation harvesting costs for practical microalgal biodiesel production.

Science.gov (United States)

Dassey, Adam J; Theegala, Chandra S

2014-01-01

Electrocoagulation has shown potential to be a primary microalgae harvesting technique for biodiesel production. However, methods to reduce energy and electrode costs are still necessary for practical application. Electrocoagulation tests were conducted on Nannochloris sp. and Dunaliella sp. using perforated aluminium and iron electrodes under various charge densities. Aluminium electrodes were shown to be more efficient than iron electrodes when harvesting both algal species. Despite the lower harvesting efficiency, however, the iron electrodes were more energy and cost efficient. Operational costs of less than $0.03/L oil were achieved when harvesting Nannochloris sp. with iron electrodes at 35% harvest efficiency, whereas aluminium electrodes cost $0.75/L oil with 42% harvesting efficiency. Increasing the harvesting efficiencies for both aluminium and iron electrodes also increased the overall cost per litre of oil, therefore lower harvesting efficiencies with lower energy inputs was recommended. Also, increasing the culturing salinity to 2 ppt sodium chloride for freshwater Nannochloris sp. was determined practical to improve the electrocoagulation energy efficiency despite a 25% reduction in cell growth.

Wellness Programs: Preventive Medicine to Reduce Health Care Costs.

Science.gov (United States)

Martini, Gilbert R., Jr.

1991-01-01

A wellness program is a formalized approach to preventive health care that can positively affect employee lifestyle and reduce future health-care costs. Describes programs for health education, smoking cessation, early detection, employee assistance, and fitness, citing industry success figures. (eight references) (MLF)

Cost-effectiveness of diet and exercise interventions to reduce overweight and obesity.

Science.gov (United States)

Forster, M; Veerman, J L; Barendregt, J J; Vos, T

2011-08-01

To analyze whether two dietary weight loss interventions--the dietary approaches to stop hypertension (DASH) program and a low-fat diet program--would be cost-effective in Australia, and to assess their potential to reduce the disease burden related to excess body weight. We constructed a multi-state life-table-based Markov model in which the distribution of body weight influences the incidence of stroke, ischemic heart disease, hypertensive heart disease, diabetes mellitus, osteoarthritis, post-menopausal breast cancer, colon cancer, endometrial cancer and kidney cancer. The target population was the overweight and obese adult population in Australia in 2003. We used a lifetime horizon for health effects and costs, and a health sector perspective for costs. We populated the model with data identified from Medline and Cochrane searches, Australian Bureau of Statistics published catalogues, Australian Institute of Health and Welfare, and Department of Health and Ageing. Disability adjusted life years (DALYs) averted, incremental cost-effectiveness ratios (ICERs) and proportions of disease burden avoided. ICERs under AUS$50,000 per DALY are considered cost-effective. The DASH and low-fat diet programs have ICERs of AUS$12,000 per DALY (95% uncertainty range: Cost-saving- 68,000) and AUS$13,000 per DALY (Cost-saving--130,000), respectively. Neither intervention reduced the body weight-related disease burden at population level by more than 0.1%. The sensitivity analysis showed that when participants' costs for time and travel are included, the ICERs increase to AUS$75,000 per DALY for DASH and AUS$49,000 per DALY for the low-fat diet. Modest weight loss during the interventions, post-intervention weight regain and low participation limit the health benefits. Diet and exercise interventions to reduce obesity are potentially cost-effective but have a negligible impact on the total body weight-related disease burden.

Beyond waste: new sustainable fillers from fly ashes stabilization, obtained by low cost raw materials

Directory of Open Access Journals (Sweden)

N. Rodella

2016-09-01

Full Text Available A sustainable economy can be achieved only by assessing processes finalized to optimize the use of resources. Waste can be a relevant source of energy thanks to energy-from-waste processes. Concerns regarding the toxic fly ashes can be solved by transforming them into resource as recycled materials. The commitment to recycle is driven by the need to conserve natural resources, reduce imports of raw materials, save landfill space and reduce pollution. A new method to stabilize fly ash from Municipal Solid Waste Incinerator (MSWI at room temperature has been developed thanks to COSMOS-RICE LIFE+ project (www.cosmos-rice.csmt.eu. This process is based on a chemical reaction that occurs properly mixing three waste fly ashes with rice husk ash, an agricultural by-product. COSMOS inert can replace critical raw materials (i.e. silica, fluorspar, clays, bentonite, antimony and alumina as filler. Moreover the materials employed in the stabilization procedure may be not available in all areas. This paper investigates the possibility of substituting silica fume with corresponding condensed silica fume and to substitute flue-gas desulfurization (FGD residues with low-cost calcium hydroxide powder. The removal of coal fly ash was also considered. The results will be presented and a possible substitution of the materials to stabilize fly ash will be discussed.

Improving performance and reducing costs of cooling towers

International Nuclear Information System (INIS)

Bartz, J.A.

1992-01-01

Cooling towers represent a significant capital investment at a steam electric power station. In addition, deficiencies in thermal performance can result in major operating penalties of fuel cost, replacement energy, and capacity addition. This paper summarizes two recent EPRI research projects aimed at reducing thermal performance deficiencies and decreasing installed costs of evaporative cooling towers. First, EPRI Research Project 2113, Cooling Tower Performance Prediction and Improvement, is summarized. This project has resulted in published data sets on the measured thermal performance characteristics of a variety of cooling tower packings, computer codes to predict tower performance, and computer code validation through large-scale tower performance measurements. Principal results are contained in an EPRIGEMS software module, Cooling Tower Advisor. This PC- based software contains a tutorial plus codes to predict tower thermal performance, arranged in a user-friendly format. The second EPRI effort, Research Project 2819-10/11, Fabric Structures for Power Plant Applications, has resulted in designs and costs of large structures with shells constructed of recently-developed fabrics. Primary power plant applications for such structures are the shells of natural draft cooling towers and coal-pile covers. Fabric structures offer low initial cost, acceptable life, and seismic superiority, among other advantages. Detailed conceptual designs and installed cost data are reviewed. 8 refs., 9 figs., 3 tabs

Does Eco-efficency Reduce the Cost of Equity Capital? Empirical Evidence From Indonesia

OpenAIRE

Alviani, Lisa; Sholihin, Mahfud

2015-01-01

The objective of this study is to examine the effect of eco-efficiency on the cost of equity capital. The study hypothesizes that the implementation of eco-efficiency reduces the cost of equity capital. Using manufacturing companies listed on the Indonesian Stock Exchange for the period 2010-2012 as data, and controlling for beta, company size, Book to Market ratio, and leverage; the study finds that the implementation of eco-efficiency may reduce the cost of equity capital. The findings sugg...

Costing the OMNIUM-G system 7500

Science.gov (United States)

Fortgang, H. R.

1980-01-01

A complete OMNIUM-G System 7500 was cost analyzed for annual production quantities ranging from 25 to 10,000 units per year. Parts and components were subjected to in-depth scrutiny to determine optimum manufacturing processes, coupled with make or buy decisions on materials and small parts. When production quantities increase both labor and material costs reduce substantially. A redesign of the system that was analyzed could result in lower costs when annual production runs approach 100,000 units/year. Material and labor costs for producing 25, 100, 25,000 and 100,00 units are given for 17 subassembly units.

Opportunities for Low Cost Titanium in Reduced Fuel Consumption, Improved Emissions, and Enhanced Durability Heavy Duty Vehicles

Energy Technology Data Exchange (ETDEWEB)

Kraft, E.H.

2002-07-22

The purpose of this study was to determine which components of heavy-duty highway vehicles are candidates for the substitution of titanium materials for current materials if the cost of those Ti components is very significantly reduced from current levels. The processes which could be used to produce those low cost components were also investigated. Heavy-duty highway vehicles are defined as all trucks and busses included in Classes 2C through 8. These include heavy pickups and vans above 8,500 lbs. GVWR, through highway tractor trailers. Class 8 is characterized as being a very cyclic market, with ''normal'' year volume, such as in 2000, of approximately 240,000 new vehicles. Classes 3-7 are less cyclic, with ''normal'' i.e., year 2000, volume totaling approximately 325,000 new vehicles. Classes 3-8 are powered about 88.5% by diesel engines, and Class 2C at very roughly 83% diesel. The engine portion of the study therefore focused on diesels. Vehicle production volumes were used in estimates of the market size for candidate components.

Structural optimization procedure of a composite wind turbine blade for reducing both material cost and blade weight

Science.gov (United States)

Hu, Weifei; Park, Dohyun; Choi, DongHoon

2013-12-01

A composite blade structure for a 2 MW horizontal axis wind turbine is optimally designed. Design requirements are simultaneously minimizing material cost and blade weight while satisfying the constraints on stress ratio, tip deflection, fatigue life and laminate layup requirements. The stress ratio and tip deflection under extreme gust loads and the fatigue life under a stochastic normal wind load are evaluated. A blade element wind load model is proposed to explain the wind pressure difference due to blade height change during rotor rotation. For fatigue life evaluation, the stress result of an implicit nonlinear dynamic analysis under a time-varying fluctuating wind is converted to the histograms of mean and amplitude of maximum stress ratio using the rainflow counting algorithm Miner's rule is employed to predict the fatigue life. After integrating and automating the whole analysis procedure an evolutionary algorithm is used to solve the discrete optimization problem.

Analysis of the influence of advanced materials for aerospace products R and D and manufacturing cost

International Nuclear Information System (INIS)

Shen, A W; Guo, J L; Wang, Z J

2015-01-01

In this paper, we pointed out the deficiency of traditional cost estimation model about aerospace products Research and Development (R and D) and manufacturing based on analyzing the widely use of advanced materials in aviation products. Then we put up with the estimating formulas of cost factor, which representing the influences of advanced materials on the labor cost rate and manufacturing materials cost rate. The values ranges of the common advanced materials such as composite materials, titanium alloy are present in the labor and materials two aspects. Finally, we estimate the R and D and manufacturing cost of F/A-18, F/A- 22, B-1B and B-2 aircraft based on the common DAPCA IV model and the modified model proposed by this paper. The calculation results show that the calculation precision improved greatly by the proposed method which considering advanced materials. So we can know the proposed method is scientific and reasonable. (paper)

DOES ECO-EFFICENCY REDUCE THE COST OF EQUITY CAPITAL? EMPIRICAL EVIDENCE FROM INDONESIA

Directory of Open Access Journals (Sweden)

Lisa Alviani

2015-05-01

Full Text Available The objective of this study is to examine the effect of eco-efficiency on the cost of equity capital. The study hypothesizes that the implementation of eco-efficiency reduces the cost of equity capital. Using manufacturing companies listed on the Indonesian Stock Exchange for the period 2010-2012 as data, and controlling for beta, company size, Book to Market ratio, and leverage; the study finds that the implementation of eco-efficiency may reduce the cost of equity capital. The findings suggest that companies should implement eco-efficency.

Does a renewable fuel standard for biofuels reduce climate costs?

Energy Technology Data Exchange (ETDEWEB)

Greaker, Mads; Hoel, Michael; Rosendahl, Knut Einar

2012-07-01

Recent contributions have questioned whether biofuels policies actually lead to emissions reductions, and thus lower climate costs. In this paper we make two contributions to the literature. First, we study the market effects of a renewable fuel standard. Opposed to most previous studies we model the supply of fossil fuels taking into account that fossil fuels is a non-renewable resource. Second, we model emissions from land use change explicitly when we evaluate the climate effects of the renewable fuel standard. We find that extraction of fossil fuels most likely will decline initially as a consequence of the standard. Thus, if emissions from biofuels are sufficiently low, the standard will have beneficial climate effects. Furthermore, we find that the standard tends to reduce total fuel (i.e., oil plus biofuels) consumption initially. Hence, even if emissions from biofuels are substantial, climate costs may be reduced. Finally, if only a subset of countries introduce a renewable fuel standard, there will be carbon leakage to the rest of the world. However, climate costs may decline as global extraction of fossil fuels is postponed.(Author)

Valuing patents on cost-reducing technology: A case study

NARCIS (Netherlands)

van Triest, S.P.; van de Vis, Wim

2007-01-01

We present an approach for valuing patents on production process improvements. Specifically, we focus on valuing a patent on cost-reducing process improvements from the viewpoint of the patent holding firm. We do this by considering the relevant cash flows that result from owning the patent. The

Multi-faceted case management: reducing compensation costs of musculoskeletal work injuries in Australia.

Science.gov (United States)

Iles, Ross Anthony; Wyatt, M; Pransky, G

2012-12-01

This study aimed to determine whether a multi-faceted model of management of work related musculoskeletal disorders reduced compensation claim costs and days of compensation for injured workers. An intervention including early reporting, employee centred case management and removal of barriers to return to work was instituted in 16 selected companies with a combined remuneration over $337 million. Outcomes were evaluated by an administrative dataset from the Victorian WorkCover Authority database. A 'quasi experimental' pre-post design was employed with 492 matched companies without the intervention used as a control group and an average of 21 months of post-intervention follow-up. Primary outcomes were average number of days of compensation and average cost of claims. Secondary outcomes were total medical costs and weekly benefits paid. Information on 3,312 claims was analysed. In companies where the intervention was introduced the average cost of claims was reduced from $6,019 to $3,913 (estimated difference $2,329, 95 % CI $1,318-$3,340) and the number of days of compensation decreased from 33.5 to 14.1 (HR 0.77, 95 % CI 0.67-0.88). Medical costs and weekly benefits costs were also lower after the intervention (p costs were noted across industry types, injury location and most employer sizes. The model of claims management investigated was effective in reducing the number of days of compensation, total claim costs, total medical costs and the amount paid in weekly benefits. Further research should investigate whether the intervention improves non-financial outcomes in the return to work process.

Development of analysis method of material f low cost accounting using lean technique in food production: A case study of Universal Food Public (UFC Co.,Ltd.

Directory of Open Access Journals (Sweden)

Wichai Chattinnawat

2015-06-01

Full Text Available This research aims to apply Lean technique in conjunction with analysis of Material Flow Cost Accounting (MFCA to production process of canned sweet corn in order to increase process efficiency, eliminate waste and reduce cost of the production. This research develops and presents new type of MFCA analysis by incorporating value and non-value added activities into the MFCA cost allocation process. According to the simulation-based measurement of the process efficiency, integrated cost allocation based on activity types results in higher proportion of negative product cost in comparison to that computed from conventional MFCA cost allocation. Thus, considering types of activities and process efficiency have great impacts on cost structure especially for the negative product cost. The research leads to solutions to improve work procedures, eliminate waste and reduce production cost. The overall cost per unit decreases with higher proportion of positive product cost.

Sources and Transportation of Bulk, Low-Cost Lunar Simulant Materials

Science.gov (United States)

Rickman, D. L.

2013-01-01

Marshall Space Flight Center (MSFC) has built the Lunar Surface Testbed using 200 tons of volcanic cinder and ash from the same source used for the simulant series JSC-1. This Technical Memorandum examines the alternatives examined for transportation and source. The cost of low-cost lunar simulant is driven by the cost of transportation, which is controlled by distance and, to a lesser extent, quantity. Metabasalts in the eastern United States were evaluated due to their proximity to MSFC. Volcanic cinder deposits in New Mexico, Colorado, and Arizona were recognized as preferred sources. In addition to having fewer green, secondary minerals, they contain vesicular glass, both of which are desirable. Transportation costs were more than 90% of the total procurement costs for the simulant material.

Evaluation of the Total Cost of Ownership of Fuel Cell-Powered Material Handling Equipment

Energy Technology Data Exchange (ETDEWEB)

Ramsden, T.

2013-04-01

This report discusses an analysis of the total cost of ownership of fuel cell-powered and traditional battery-powered material handling equipment (MHE, or more typically 'forklifts'). A number of fuel cell MHE deployments have received funding support from the federal government. Using data from these government co-funded deployments, DOE's National Renewable Energy Laboratory (NREL) has been evaluating the performance of fuel cells in material handling applications. NREL has assessed the total cost of ownership of fuel cell MHE and compared it to the cost of ownership of traditional battery-powered MHE. As part of its cost of ownership assessment, NREL looked at a range of costs associated with MHE operation, including the capital costs of battery and fuel cell systems, the cost of supporting infrastructure, maintenance costs, warehouse space costs, and labor costs. Considering all these costs, NREL found that fuel cell MHE can have a lower overall cost of ownership than comparable battery-powered MHE.

One Improvement Method of Reducing Duration Directly to Solve Time-Cost Tradeoff Problem

Science.gov (United States)

Jian-xun, Qi; Dedong, Sun

Time and cost are two of the most important factors for project plan and schedule management, and specially, time-cost tradeoff problem is one classical problem in project scheduling, which is also a difficult problem. Methods of solving the problem mainly contain method of network flow and method of mending the minimal cost. Thereinto, for the method of mending the minimal cost is intuitionistic, convenient and lesser computation, these advantages make the method being used widely in practice. But disadvantage of the method is that the result of each step is optimal but the terminal result maybe not optimal. In this paper, firstly, method of confirming the maximal effective quantity of reducing duration is designed; secondly, on the basis of above method and the method of mending the minimal cost, the main method of reducing duration directly is designed to solve time-cost tradeoff problem, and by analyzing validity of the method, the method could obtain more optimal result for the problem.

Low cost construction technologies and materials - case study Mozambuique

CSIR Research Space (South Africa)

Kuchena, JC

2009-09-01

Full Text Available Low cost or affordable construction technologies and materials are often touted as a panacea in meeting the ever growing demand for rapid housing delivery in developing economies. Mozambique as with most of the developing world, from both historical...

Reduced Multivariate Polynomial Model for Manufacturing Costs Estimation of Piping Elements

Directory of Open Access Journals (Sweden)

Nibaldo Rodriguez

2013-01-01

Full Text Available This paper discusses the development and evaluation of an estimation model of manufacturing costs of piping elements through the application of a Reduced Multivariate Polynomial (RMP. The model allows obtaining accurate estimations, even when enough and adequate information is not available. This situation typically occurs in the early stages of the design process of industrial products. The experimental evaluations show that the approach is capable, with a low complexity, of reducing uncertainties and to predict costs with significant precision. Comparisons with a neural network showed also that the RMP performs better considering a set of classical performance measures with the corresponding lower complexity and higher accuracy.

43 CFR 429.26 - When may Reclamation reduce or waive costs or fees?

Science.gov (United States)

2010-10-01

... Reductions or Waivers of Application Fees, Administrative Costs, and Use Fees § 429.26 When may Reclamation reduce or waive costs or fees? (a) As determined appropriate and approved and documented by the applicable Regional Director, the application fees may be waived, and charges for administrative costs or use...

Strategic materials: Technologies to reduce US import vulnerability

Science.gov (United States)

1985-05-01

Three nations, South Africa, Zaire, and the U.S.S.R., account for over half of the world's production of chromium, cobalt, manganese, and platinum group metals. These metals are essential in the production of high-temperature alloys, steel and stainless steel, industrial and automotive catalysts, electronics, and other applications that are critical to the U.S. economy and the national defense. With minor exceptions, there is no domestic mine production of any of the four metals. Government actions to assure secure supplies of metals critical to the United States have been limited largely to reliance on the national defense stockpile to ensure the availability of materials required for national defense in time of war, leaving it to the free market to provide a diversity of suppliers for the industrial economy. An overall strategy to reduce U.S. reliance on uncertain sources of supply of strategic materials should be based on a combination of three technical approaches: increase the diversity of the world supply of strategic metals through the development of promising deposits; decrease demand for strategic metals through the implementation of improved manufacturing processes and recycling of strategic materials from scrap and waste; and identify and test substitute materials for current applications and develop new materials with reduced strategic material content for future applications.

Materials Genome Initiative Element

Science.gov (United States)

Vickers, John

2015-01-01

NASA is committed to developing new materials and manufacturing methods that can enable new missions with ever increasing mission demands. Typically, the development and certification of new materials and manufacturing methods in the aerospace industry has required more than 20 years of development time with a costly testing and certification program. To reduce the cost and time to mature these emerging technologies, NASA is developing computational materials tools to improve understanding of the material and guide the certification process.

Weight and cost analysis of large wind turbine rotors constructed from conventional materials and from advanced composite materials

Energy Technology Data Exchange (ETDEWEB)

van Holten, Th

1982-07-01

Cost calculations and cost analyses of the blades and the (teetering) hubs of large wind turbines. The blades are of different shapes, construction and materials (aluminium, steel and glass reinforced plastics). Teetering hubs are heavy and complicated steel constructions, necessary to minimize material fatigue. In large wind turbines with a diameter of 60 to 100 m or even more the rotor mass (hubs and blades together) may vary from 46,000 to 216,000 kg. Costs are estimated to be DFL. 16/kg, both for teetering hubs and/or blades made of glass reinforced plastics. Due to lack of experience and of exact knowledge of the loads appearing during operation under field conditions the uncertainty factor may be 10% to 15%.

Consolidating staff augmentation contracts improves teamwork and reduces costs

International Nuclear Information System (INIS)

Townsend, J.; Sibilla, L.; Gregovich, J.W.

1991-01-01

Nuclear power plants have traditionally used multiple contracting firms to provide temporary staff augmentation personnel primarily because of two perceptions: (1) managers believe they have greater access to a higher quality, readily available pool of applicants. (2) using multiple contractors inherently keeps costs down as a result of several competitors submitting resumes for the same position. This paper provides information, based on the experiences of a leading nuclear power plant, that disproves these perceptions. It explains why consolidating several contracts for professional and technical classifications (excluding craft labor and refueling personnel) and competitively bidding and awarding the contract to a single contracting firm promotes teamwork and reduces costs

Costs and cost-effectiveness of training traditional birth attendants to reduce neonatal mortality in the Lufwanyama Neonatal Survival study (LUNESP).

Science.gov (United States)

Sabin, Lora L; Knapp, Anna B; MacLeod, William B; Phiri-Mazala, Grace; Kasimba, Joshua; Hamer, Davidson H; Gill, Christopher J

2012-01-01

The Lufwanyama Neonatal Survival Project ("LUNESP") was a cluster randomized, controlled trial that showed that training traditional birth attendants (TBAs) to perform interventions targeting birth asphyxia, hypothermia, and neonatal sepsis reduced all-cause neonatal mortality by 45%. This companion analysis was undertaken to analyze intervention costs and cost-effectiveness, and factors that might improve cost-effectiveness. We calculated LUNESP's financial and economic costs and the economic cost of implementation for a forecasted ten-year program (2011-2020). In each case, we calculated the incremental cost per death avoided and disability-adjusted life years (DALYs) averted in real 2011 US dollars. The forecasted 10-year program analysis included a base case as well as 'conservative' and 'optimistic' scenarios. Uncertainty was characterized using one-way sensitivity analyses and a multivariate probabilistic sensitivity analysis. The estimated financial and economic costs of LUNESP were $118,574 and $127,756, respectively, or $49,469 and $53,550 per year. Fixed costs accounted for nearly 90% of total costs. For the 10-year program, discounted total and annual program costs were $256,455 and $26,834 respectively; for the base case, optimistic, and conservative scenarios, the estimated cost per death avoided was $1,866, $591, and $3,024, and cost per DALY averted was $74, $24, and $120, respectively. Outcomes were robust to variations in local costs, but sensitive to variations in intervention effect size, number of births attended by TBAs, and the extent of foreign consultants' participation. Based on established guidelines, the strategy of using trained TBAs to reduce neonatal mortality was 'highly cost effective'. We strongly recommend consideration of this approach for other remote rural populations with limited access to health care.

Metal-free supercapacitor with aqueous electrolyte and low-cost carbon materials

Science.gov (United States)

Blomquist, Nicklas; Wells, Thomas; Andres, Britta; Bäckström, Joakim; Forsberg, Sven; Olin, Håkan

2017-01-01

Electric double-layer capacitors (EDLCs) or supercapacitors (SCs) are fast energy storage devices with high pulse efficiency and superior cyclability, which makes them useful in various applications including electronics, vehicles and grids. Aqueous SCs are considered to be more environmentally friendly than those based on organic electrolytes. Because of the corrosive nature of the aqueous environment, however, expensive electrochemically stable materials are needed for the current collectors and electrodes in aqueous SCs. This results in high costs for a given energy-storage capacity. To address this, we developed a novel low-cost aqueous SC using graphite foil as the current collector and a mix of graphene, nanographite, simple water-purification carbons and nanocellulose as electrodes. The electrodes were coated directly onto the graphite foil by using casting frames and the SCs were assembled in a pouch cell design. With this approach, we achieved a material cost reduction of greater than 90% while maintaining approximately one-half of the specific capacitance of a commercial unit, thus demonstrating that the proposed SC can be an environmentally friendly, low-cost alternative to conventional SCs.

Reducing the length of postnatal hospital stay: implications for cost and quality of care.

Science.gov (United States)

Bowers, John; Cheyne, Helen

2016-01-15

UK health services are under pressure to make cost savings while maintaining quality of care. Typically reducing the length of time patients stay in hospital and increasing bed occupancy are advocated to achieve service efficiency. Around 800,000 women give birth in the UK each year making maternity care a high volume, high cost service. Although average length of stay on the postnatal ward has fallen substantially over the years there is pressure to make still further reductions. This paper explores and discusses the possible cost savings of further reductions in length of stay, the consequences for postnatal services in the community, and the impact on quality of care. We draw on a range of pre-existing data sources including, national level routinely collected data, workforce planning data and data from national surveys of women's experience. Simulation and a financial model were used to estimate excess demand, work intensity and bed occupancy to explore the quantitative, organisational consequences of reducing the length of stay. These data are discussed in relation to findings of national surveys to draw inferences about potential impacts on cost and quality of care. Reducing the length of time women spend in hospital after birth implies that staff and bed numbers can be reduced. However, the cost savings may be reduced if quality and access to services are maintained. Admission and discharge procedures are relatively fixed and involve high cost, trained staff time. Furthermore, it is important to retain a sufficient bed contingency capacity to ensure a reasonable level of service. If quality of care is maintained, staffing and bed capacity cannot be simply reduced proportionately: reducing average length of stay on a typical postnatal ward by six hours or 17% would reduce costs by just 8%. This might still be a significant saving over a high volume service however, earlier discharge results in more women and babies with significant care needs at home. Quality

Paving materials for heat island mitigation

Energy Technology Data Exchange (ETDEWEB)

Pomerantz, M.; Akbari, H.; Chen, A.; Taha, H. [Lawrence Berkeley National Lab., CA (United States); Rosenfeld, A.H. [Dept. of Energy, Washington, DC (United States)

1997-11-01

This report summarizes paving materials suitable for urban streets, driveways, parking lots and walkways. The authors evaluate materials for their abilities to reflect sunlight, which will reduce their temperatures. This in turn reduces the excess air temperature of cities (the heat island effect). The report presents the compositions of the materials, their suitability for particular applications, and their approximate costs (in 1996). Both new and resurfacing are described. They conclude that, although light-colored materials may be more expensive than conventional black materials, a thin layer of light-colored pavement may produce energy savings and smog reductions whose long-term worth is greater than the extra cost.

Advanced Gas Cooled Reactor Materials Program. Reducing helium impurity depletion in HTGR materials testing

International Nuclear Information System (INIS)

Baldwin, D.H.

1984-08-01

Moisture depletion in HTGR materials testing rigs has been empirically studied in the GE High Temperature Reactor Materials Testing Laboratory (HTRMTL). Tests have shown that increased helium flow rates and reduction in reactive (oxidizable) surface area are effective means of reducing depletion. Further, a portion of the depletion has been shown to be due to the presence of free C released by the dissociation of CH 4 . This depletion component can be reduced by reducing the helium residence time (increasing the helium flow rate) or by reducing the CH 4 concentration in the test gas. Equipment modifications to reduce depletion have been developed, tested, and in most cases implemented in the HTRMTL to date. These include increasing the Helium Loop No. 1 pumping capacity, conversion of metallic retorts and radiation shields to alumina, isolation of thermocouple probes from the test gas by alumina thermowells, and substitution of non-reactive Mo-TZM for reactive metallic structural components

Low-Cost Precursors to Novel Hydrogen Storage Materials

International Nuclear Information System (INIS)

Linehan, Suzanne W.; Chin, Arthur A.; Allen, Nathan T.; Butterick, Robert; Kendall, Nathan T.; Klawiter, I. Leo; Lipiecki, Francis J.; Millar, Dean M.; Molzahn, David C.; November, Samuel J.; Jain, Puja; Nadeau, Sara; Mancroni, Scott

2010-01-01

From 2005 to 2010, The Dow Chemical Company (formerly Rohm and Haas Company) was a member of the Department of Energy Center of Excellence on Chemical Hydrogen Storage, which conducted research to identify and develop chemical hydrogen storage materials having the potential to achieve DOE performance targets established for on-board vehicular application. In collaboration with Center co-leads Los Alamos National Laboratory (LANL) and Pacific Northwest National Laboratory (PNNL), and other Center partners, Dow's efforts were directed towards defining and evaluating novel chemistries for producing chemical hydrides and processes for spent fuel regeneration. In Phase 1 of this project, emphasis was placed on sodium borohydride (NaBH 4 ), long considered a strong candidate for hydrogen storage because of its high hydrogen storage capacity, well characterized hydrogen release chemistry, safety, and functionality. Various chemical pathways for regenerating NaBH 4 from spent sodium borate solution were investigated, with the objective of meeting the 2010/2015 DOE targets of $2-3/gal gasoline equivalent at the pump ($2-3/kg H 2 ) for on-board hydrogen storage systems and an overall 60% energy efficiency. With the September 2007 No-Go decision for NaBH 4 as an on-board hydrogen storage medium, focus was shifted to ammonia borane (AB) for on-board hydrogen storage and delivery. However, NaBH 4 is a key building block to most boron-based fuels, and the ability to produce NaBH 4 in an energy-efficient, cost-effective, and environmentally sound manner is critical to the viability of AB, as well as many leading materials under consideration by the Metal Hydride Center of Excellence. Therefore, in Phase 2, research continued towards identifying and developing a single low-cost NaBH4 synthetic route for cost-efficient AB first fill, and conducting baseline cost estimates for first fill and regenerated AB using a variety of synthetic routes. This project utilized an engineering

Barytes board: a cost effective radiation barrier material for use in diagnostic x-ray suites

International Nuclear Information System (INIS)

Coalter, G.C.; Metcalfe, P.E.

1987-01-01

The use of barium based products in protective barrier materials proved successful for many years until their cost of manufacture and increases in labour costs for fixing and stopping saw the introduction of lead ply as the material of choice in diagnostic X-ray suites. Whilst the advantage of sheet lead as a barrier for diagnostic X-rays, where the photoelectric effect predominates is recognised, this precedence is somewhat negated by the high cost of manufacture and delays in supply. Lead lined ply also requires external cladding after erection for an acceptable finish to be obtained. Such cost increases have prompted us to re-evaluate the use of precast barium plaster sheets (Barytes Board) as an alternative barrier material

Economic benefits of advanced materials in nuclear power systems

International Nuclear Information System (INIS)

Busby, J.T.

2009-01-01

A key obstacle to the commercial deployment of advanced fast reactors is the capital cost. There is a perception of higher capital cost for fast reactor systems than advanced light water reactors. However, cost estimates come with a large uncertainty since far fewer fast reactors have been built than light water reactor facilities. Furthermore, the large variability of industrial cost estimates complicates accurate comparisons. Reductions in capital cost can result from design simplifications, new technologies that allow reduced capital costs, and simulation techniques that help optimize system design. It is plausible that improved materials will provide opportunities for both simplified design and reduced capital cost. Advanced materials may also allow improved safety and longer component lifetimes. This work examines the potential impact of advanced materials on the capital investment cost of fast nuclear reactors.

Costs and cost-effectiveness of training traditional birth attendants to reduce neonatal mortality in the Lufwanyama Neonatal Survival study (LUNESP.

Directory of Open Access Journals (Sweden)

Lora L Sabin

Full Text Available The Lufwanyama Neonatal Survival Project ("LUNESP" was a cluster randomized, controlled trial that showed that training traditional birth attendants (TBAs to perform interventions targeting birth asphyxia, hypothermia, and neonatal sepsis reduced all-cause neonatal mortality by 45%. This companion analysis was undertaken to analyze intervention costs and cost-effectiveness, and factors that might improve cost-effectiveness.We calculated LUNESP's financial and economic costs and the economic cost of implementation for a forecasted ten-year program (2011-2020. In each case, we calculated the incremental cost per death avoided and disability-adjusted life years (DALYs averted in real 2011 US dollars. The forecasted 10-year program analysis included a base case as well as 'conservative' and 'optimistic' scenarios. Uncertainty was characterized using one-way sensitivity analyses and a multivariate probabilistic sensitivity analysis. The estimated financial and economic costs of LUNESP were $118,574 and $127,756, respectively, or $49,469 and $53,550 per year. Fixed costs accounted for nearly 90% of total costs. For the 10-year program, discounted total and annual program costs were $256,455 and $26,834 respectively; for the base case, optimistic, and conservative scenarios, the estimated cost per death avoided was $1,866, $591, and $3,024, and cost per DALY averted was $74, $24, and $120, respectively. Outcomes were robust to variations in local costs, but sensitive to variations in intervention effect size, number of births attended by TBAs, and the extent of foreign consultants' participation.Based on established guidelines, the strategy of using trained TBAs to reduce neonatal mortality was 'highly cost effective'. We strongly recommend consideration of this approach for other remote rural populations with limited access to health care.

Reducing the Cost of Thermal Energy Storage for Parabolic Trough Solar Power Plants

Energy Technology Data Exchange (ETDEWEB)

Gawlik, Keith

2013-06-25

Thermal energy storage systems using phase change materials were evaluated for trough systems that use oil, steam, and high temperature salts as heat transfer fluids. A variety of eutectic salts and metal alloys were considered as phase change materials in a cascaded arrangement. Literature values of specific heat, latent heat, density, and other thermophysical properties were used in initial analyses. Testing laboratories were contracted to measure properties for candidate materials for comparison to the literature and for updating the models. A TRNSYS model from Phase 1 was further developed for optimizing the system, including a novel control algorithm. A concept for increasing the bulk thermal conductivity of the phase change system was developed using expanded metal sheets. Outside companies were contracted to design and cost systems using platecoil heat exchangers immersed in the phase change material. Laboratory evaluations of the one-dimensional and three-dimensional behavior of expanded metal sheets in a low conductivity medium were used to optimize the amount of thermal conductivity enhancement. The thermal energy storage systems were compared to baseline conventional systems. The best phase change system found in this project, which was for the high temperature plant, had a projected cost of $25.2 per kWhth, The best system also had a cost that was similar to the base case, a direct two-tank molten salt system.

Idaho National Engineering Laboratory materials in inventory natural and enriched uranium management and storage costs

International Nuclear Information System (INIS)

Nebeker, R.L.

1995-11-01

On July 13, 1994, the Office of Environmental Management (EM) was requested to develop a planning process that would result in management policies for dealing with nuclear materials in inventory. In response to this request, EM launched the Materials In Inventory (MIN) Initiative. A Headquarters Working Group was established to develop the broad policy framework for developing MIN management policies. MIN activities cover essentially all nuclear materials within the DOE complex, including such items as spent nuclear fuel, depleted uranium, plutonium, natural and enriched uranium, and other materials. In August 1995, a report discussing the natural and enriched uranium portion of the Initiative for the Idaho National Engineering Laboratory (INEL) was published. That report, 'Idaho National Engineering Laboratory Materials-in-Inventory, Natural and Enriched Uranium'.' identified MIN under the control of Lockheed Idaho Technologies Company at the INEL. Later, additional information related to the costs associated with the storage of MIN materials was requested to supplement this report. This report provides the cost information for storing, disposing, or consolidating the natural and enriched uranium portion of the MIN materials at the INEL. The information consists of eight specific tables which detail present management costs and estimated costs of future activities

Comparative evaluation of low cost materials as constructed wetland filling media

Science.gov (United States)

Pinho, Henrique J. O.; Vaz, Mafalda M.; Mateus, Dina M. R.

2017-11-01

Three waste materials from civil construction activities were assessed as low cost alternative filling materials used in Constructed Wetlands (CW). CW are green processes for wastewater treatment, whose design includes an appropriate selection of vegetation and filling material. The sustainability of such processes may be incremented using recovered wastes as filling materials. The abilities of the materials to support plant growth and to contribute to pollutants removal from wastewater were assessed and compared to expanded clay, a filling usually used in CW design. Statistical analysis, using one-way ANOVA and Welch's ANOVA, demonstrate that limestone fragments are a better choice of filling material than brick fragments and basalt gravel.

Advanced transfer chute reduces dust at lower cost

Energy Technology Data Exchange (ETDEWEB)

Blazek, C. [Benetech Inc. (United States)

2005-10-01

Dominion Resources' Kincaid Generating Station in Illinois is recognized as a leader in handling and burning PRB coal. Since being named the Powder Plant of the Year in 2001 and 2004 by the PRB Coal Users' Group, Kincaid has improved its coal handling by installing an InteliFlo controlled-flow transfer chute from Benetech. The InteliFlo design eliminates the need for skirt boards, conveyor discharge hoods, and complex load bed designs, and reduces O & M costs. 4 figs.

Societal value of generic medicines beyond cost-saving through reduced prices.

Science.gov (United States)

Dylst, Pieter; Vulto, Arnold; Simoens, Steven

2015-01-01

This paper aims to provide an overview of the added societal value of generic medicines beyond their cost-saving potential through reduced prices. In addition, an observational case study will document the impact of generic entry on access to pharmacotherapy in The Netherlands and an illustrative exercise was carried out to highlight the budget impact of generic entry. A narrative literature review was carried out to explore the impact of generic medicines on access to pharmacotherapy, innovation and medication adherence. Data from the Medicines and Medical Devices Information Project database in The Netherlands were used for the case study in which the impact of generic medicine entrance on the budget and the number of users was calculated as an illustrative exercise. Generic medicines have an additional societal value beyond their cost-saving potential through reduced prices. Generic medicines increase access to pharmacotherapy, provide a stimulus for innovation by both originator companies and generic companies and, under the right circumstances, have a positive impact on medication adherence. Generic medicines offer more to society than just their cost-saving potential through reduced prices. As such, governments must not focus only on the prices of generic medicines as this will threaten their long-term sustainability. Governments must therefore act appropriately and implement a coherent set of policies to increase the use of generic medicines.

Design Options to Reduce Development Cost of First Generation Surface Reactors

International Nuclear Information System (INIS)

Poston, David I.; Marcille, Thomas F.

2006-01-01

Low-power surface reactors have the potential to have the lowest development cost of any space reactor application, primarily because system alpha (mass/kg) is not of utmost importance and mission lifetimes do not have to be a decade or more. Even then, the development cost of a surface reactor can vary substantially depending on the performance requirements (e.g. mass, power, lifetime, reliability) and technical development risk deemed acceptable by the end-user. It is important for potential users to be aware of these relationships before they determine their future architecture (i.e. decide what they need). Generally, the greatest potential costs of a space reactor program are a nuclear-powered ground test and extensive material development campaigns, so it is important to consider options that can minimize the need for or complexity of such tasks. The intended goal of this paper is to inform potential surface reactor users of the potential sensitivities of surface reactor development cost to design requirements, and areas where technical risk can be traded with development cost

Optimizing power plant cycling operations while reducing generating plant damage and costs

Energy Technology Data Exchange (ETDEWEB)

Lefton, S A; Besuner, P H; Grimsrud, P [Aptech Engineering Services, Inc., Sunnyvale, CA (United States); Bissel, A [Electric Supply Board, Dublin (Ireland)

1999-12-31

This presentation describes a method for analyzing, quantifying, and minimizing the total cost of fossil, combined cycle, and pumped hydro power plant cycling operation. The method has been developed, refined, and applied during engineering studies at some 160 units in the United States and 8 units at the Irish Electric Supply Board (ESB) generating system. The basic premise of these studies was that utilities are underestimating the cost of cycling operation. The studies showed that the cost of cycling conventional boiler/turbine fossil power plants can range from between $2,500 and $500,000 per start-stop cycle. It was found that utilities typically estimate these costs by factors of 3 to 30 below actual costs and, thus, often significantly underestimate their true cycling costs. Knowledge of the actual, or total, cost of cycling will reduce power production costs by enabling utilities to more accurately dispatch their units to manage unit life expectancies, maintenance strategies and reliability. Utility management responses to these costs are presented and utility cost savings have been demonstrated. (orig.) 7 refs.

Optimizing power plant cycling operations while reducing generating plant damage and costs

Energy Technology Data Exchange (ETDEWEB)

Lefton, S.A.; Besuner, P.H.; Grimsrud, P. [Aptech Engineering Services, Inc., Sunnyvale, CA (United States); Bissel, A. [Electric Supply Board, Dublin (Ireland)

1998-12-31

This presentation describes a method for analyzing, quantifying, and minimizing the total cost of fossil, combined cycle, and pumped hydro power plant cycling operation. The method has been developed, refined, and applied during engineering studies at some 160 units in the United States and 8 units at the Irish Electric Supply Board (ESB) generating system. The basic premise of these studies was that utilities are underestimating the cost of cycling operation. The studies showed that the cost of cycling conventional boiler/turbine fossil power plants can range from between $2,500 and $500,000 per start-stop cycle. It was found that utilities typically estimate these costs by factors of 3 to 30 below actual costs and, thus, often significantly underestimate their true cycling costs. Knowledge of the actual, or total, cost of cycling will reduce power production costs by enabling utilities to more accurately dispatch their units to manage unit life expectancies, maintenance strategies and reliability. Utility management responses to these costs are presented and utility cost savings have been demonstrated. (orig.) 7 refs.

A cost sensitive inpatient bed reservation approach to reduce emergency department boarding times.

Science.gov (United States)

Qiu, Shanshan; Chinnam, Ratna Babu; Murat, Alper; Batarse, Bassam; Neemuchwala, Hakimuddin; Jordan, Will

2015-03-01

Emergency departments (ED) in hospitals are experiencing severe crowding and prolonged patient waiting times. A significant contributing factor is boarding delays where admitted patients are held in ED (occupying critical resources) until an inpatient bed is identified and readied in the admit wards. Recent research has suggested that if the hospital admissions of ED patients can be predicted during triage or soon after, then bed requests and preparations can be triggered early on to reduce patient boarding time. We propose a cost sensitive bed reservation policy that recommends optimal bed reservation times for patients. The policy relies on a classifier that estimates the probability that the ED patient will be admitted using the patient information collected and readily available at triage or right after. The policy is cost sensitive in that it accounts for costs associated with patient admission prediction misclassification as well as costs associated with incorrectly selecting the reservation time. Results from testing the proposed bed reservation policy using data from a VA Medical Center are very promising and suggest significant cost saving opportunities and reduced patient boarding times.

Cost-effectiveness analysis of scalp cooling to reduce chemotherapy-induced alopecia

NARCIS (Netherlands)

van den Hurk, C.J.; van den Akker-van Marle, E.M.; Breed, W.P.M.; van de Poll-Franse, L.V.; Nortier, J.; Coebergh, J.W.W.

2014-01-01

Background. Alopecia is a frequently occurring side effect of chemotherapy that often can be prevented by cooling the scalp during the infusion. This study compared effects and costs of scalp cooling with usual general oncological care, i.e. purchasing a wig or head cover. Material and methods.

Next-generation nozzle check valve significantly reduces operating costs

Energy Technology Data Exchange (ETDEWEB)

Roorda, O. [SMX International, Toronto, ON (Canada)

2009-01-15

Check valves perform an important function in preventing reverse flow and protecting plant and mechanical equipment. However, the variety of different types of valves and extreme differences in performance even within one type can change maintenance requirements and life cycle costs, amounting to millions of dollars over the typical 15-year design life of piping components. A next-generation non-slam nozzle check valve which prevents return flow has greatly reduced operating costs by protecting the mechanical equipment in a piping system. This article described the check valve varieties such as the swing check valve, a dual-plate check valve, and nozzle check valves. Advancements in optimized design of a non-slam nozzle check valve were also discussed, with particular reference to computer flow modelling such as computational fluid dynamics; computer stress modelling such as finite element analysis; and flow testing (using rapid prototype development and flow loop testing), both to improve dynamic performance and reduce hydraulic losses. The benefits of maximized dynamic performance and minimized pressure loss from the new designed valve were also outlined. It was concluded that this latest non-slam nozzle check valve design has potential applications in natural gas, liquefied natural gas, and oil pipelines, including subsea applications, as well as refineries, and petrochemical plants among others, and is suitable for horizontal and vertical installation. The result of this next-generation nozzle check valve design is not only superior performance, and effective protection of mechanical equipment but also minimized life cycle costs. 1 fig.

Reducing Anesthesia and Health Care Cost Through Utilization of Child Life Specialists in Pediatric Radiation Oncology

Energy Technology Data Exchange (ETDEWEB)

Scott, Michael T. [Department of Radiation Oncology, University of Miami Sylvester Comprehensive Cancer Center and Jackson Memorial Hospital, Miami, Florida (United States); Department of Radiation Oncology, University of Florida College of Medicine, Jacksonville, Florida (United States); Todd, Kimberly E.; Oakley, Heather; Bradley, Julie A.; Rotondo, Ronny L.; Morris, Christopher G.; Klein, Stuart; Mendenhall, Nancy P. [Department of Radiation Oncology, University of Florida College of Medicine, Jacksonville, Florida (United States); Indelicato, Daniel J., E-mail: dindelicato@floridaproton.org [Department of Radiation Oncology, University of Florida College of Medicine, Jacksonville, Florida (United States)

2016-10-01

Purpose: To analyze the effectiveness of a certified child life specialist (CCLS) in reducing the frequency of daily anesthesia at our institution, and to quantify the potential health care payer cost savings of CCLS utilization in the United States. Methods and Materials: From 2006 to 2014, 738 children (aged ≤21 years) were treated with radiation therapy at our institution. We retrospectively analyzed the frequency of daily anesthesia before and after hiring a CCLS in 2011 after excluding patients aged 0 to 2 and >12 years. In the analyzed cohort of 425 patients the median age was 7.6 years (range, 3-12.9 years). For the pre-CCLS period the overall median age was 7.5 years; for the post-CCLS period the median age was 7.7 years. An average 6-week course of pediatric anesthesia for radiation therapy costs $50,000 in charges to the payer. The average annual cost to employ one CCLS is approximately $50,000. Results: Before employing a CCLS, 69 of 121 children (57%) aged 3 to 12 years required daily anesthesia, including 33 of 53 children (62.3%) aged 5 to 8 years. After employing a CCLS, 124 of 304 children (40.8%) aged 3 to 12 years required daily anesthesia, including only 34 of 118 children (28.8%) aged 5 to 8 years (P<.0001). With a >16% absolute reduction in anesthesia use after employment of a CCLS, the health care payer cost savings was approaching $50,000 per 6 children aged 3 to 12 years treated annually with radiation therapy in our institution. This reduction resulted in a total of only 6 children aged 3 to 12 years required anesthesia to be treated per year at our center to achieve nearly break-even cost savings to the health care payer if the payer were to subsidize the employment expense of a CCLS. Overall, the CCLS intervention can provide an average annualized health care payer cost savings of “$[(anesthesia cost to payer during radiation therapy course/6) − (CCLS expense to payer/N)]” per child (N) treated with radiation

Reducing Anesthesia and Health Care Cost Through Utilization of Child Life Specialists in Pediatric Radiation Oncology

International Nuclear Information System (INIS)

Scott, Michael T.; Todd, Kimberly E.; Oakley, Heather; Bradley, Julie A.; Rotondo, Ronny L.; Morris, Christopher G.; Klein, Stuart; Mendenhall, Nancy P.; Indelicato, Daniel J.

2016-01-01

Purpose: To analyze the effectiveness of a certified child life specialist (CCLS) in reducing the frequency of daily anesthesia at our institution, and to quantify the potential health care payer cost savings of CCLS utilization in the United States. Methods and Materials: From 2006 to 2014, 738 children (aged ≤21 years) were treated with radiation therapy at our institution. We retrospectively analyzed the frequency of daily anesthesia before and after hiring a CCLS in 2011 after excluding patients aged 0 to 2 and >12 years. In the analyzed cohort of 425 patients the median age was 7.6 years (range, 3-12.9 years). For the pre-CCLS period the overall median age was 7.5 years; for the post-CCLS period the median age was 7.7 years. An average 6-week course of pediatric anesthesia for radiation therapy costs $50,000 in charges to the payer. The average annual cost to employ one CCLS is approximately $50,000. Results: Before employing a CCLS, 69 of 121 children (57%) aged 3 to 12 years required daily anesthesia, including 33 of 53 children (62.3%) aged 5 to 8 years. After employing a CCLS, 124 of 304 children (40.8%) aged 3 to 12 years required daily anesthesia, including only 34 of 118 children (28.8%) aged 5 to 8 years (P 16% absolute reduction in anesthesia use after employment of a CCLS, the health care payer cost savings was approaching $50,000 per 6 children aged 3 to 12 years treated annually with radiation therapy in our institution. This reduction resulted in a total of only 6 children aged 3 to 12 years required anesthesia to be treated per year at our center to achieve nearly break-even cost savings to the health care payer if the payer were to subsidize the employment expense of a CCLS. Overall, the CCLS intervention can provide an average annualized health care payer cost savings of “$[(anesthesia cost to payer during radiation therapy course/6) − (CCLS expense to payer/N)]” per child (N) treated with radiation therapy, where N

A Simple Exoskeleton That Assists Plantarflexion Can Reduce the Metabolic Cost of Human Walking

Science.gov (United States)

Malcolm, Philippe; Derave, Wim; Galle, Samuel; De Clercq, Dirk

2013-01-01

Background Even though walking can be sustained for great distances, considerable energy is required for plantarflexion around the instant of opposite leg heel contact. Different groups attempted to reduce metabolic cost with exoskeletons but none could achieve a reduction beyond the level of walking without exoskeleton, possibly because there is no consensus on the optimal actuation timing. The main research question of our study was whether it is possible to obtain a higher reduction in metabolic cost by tuning the actuation timing. Methodology/Principal Findings We measured metabolic cost by means of respiratory gas analysis. Test subjects walked with a simple pneumatic exoskeleton that assists plantarflexion with different actuation timings. We found that the exoskeleton can reduce metabolic cost by 0.18±0.06 W kg−1 or 6±2% (standard error of the mean) (p = 0.019) below the cost of walking without exoskeleton if actuation starts just before opposite leg heel contact. Conclusions/Significance The optimum timing that we found concurs with the prediction from a mathematical model of walking. While the present exoskeleton was not ambulant, measurements of joint kinetics reveal that the required power could be recycled from knee extension deceleration work that occurs naturally during walking. This demonstrates that it is theoretically possible to build future ambulant exoskeletons that reduce metabolic cost, without power supply restrictions. PMID:23418524

Low-Cost Precursors to Novel Hydrogen Storage Materials

Energy Technology Data Exchange (ETDEWEB)

Suzanne W. Linehan; Arthur A. Chin; Nathan T. Allen; Robert Butterick; Nathan T. Kendall; I. Leo Klawiter; Francis J. Lipiecki; Dean M. Millar; David C. Molzahn; Samuel J. November; Puja Jain; Sara Nadeau; Scott Mancroni

2010-12-31

From 2005 to 2010, The Dow Chemical Company (formerly Rohm and Haas Company) was a member of the Department of Energy Center of Excellence on Chemical Hydrogen Storage, which conducted research to identify and develop chemical hydrogen storage materials having the potential to achieve DOE performance targets established for on-board vehicular application. In collaboration with Center co-leads Los Alamos National Laboratory (LANL) and Pacific Northwest National Laboratory (PNNL), and other Center partners, Dow's efforts were directed towards defining and evaluating novel chemistries for producing chemical hydrides and processes for spent fuel regeneration. In Phase 1 of this project, emphasis was placed on sodium borohydride (NaBH{sub 4}), long considered a strong candidate for hydrogen storage because of its high hydrogen storage capacity, well characterized hydrogen release chemistry, safety, and functionality. Various chemical pathways for regenerating NaBH{sub 4} from spent sodium borate solution were investigated, with the objective of meeting the 2010/2015 DOE targets of $2-3/gal gasoline equivalent at the pump ($2-3/kg H{sub 2}) for on-board hydrogen storage systems and an overall 60% energy efficiency. With the September 2007 No-Go decision for NaBH{sub 4} as an on-board hydrogen storage medium, focus was shifted to ammonia borane (AB) for on-board hydrogen storage and delivery. However, NaBH{sub 4} is a key building block to most boron-based fuels, and the ability to produce NaBH{sub 4} in an energy-efficient, cost-effective, and environmentally sound manner is critical to the viability of AB, as well as many leading materials under consideration by the Metal Hydride Center of Excellence. Therefore, in Phase 2, research continued towards identifying and developing a single low-cost NaBH4 synthetic route for cost-efficient AB first fill, and conducting baseline cost estimates for first fill and regenerated AB using a variety of synthetic routes. This

A Cost Effectiveness Analysis of Salt Reduction Policies to Reduce Coronary Heart Disease in Four Eastern Mediterranean Countries

Science.gov (United States)

Mason, Helen; Shoaibi, Azza; Ghandour, Rula; O'Flaherty, Martin; Capewell, Simon; Khatib, Rana; Jabr, Samer; Unal, Belgin; Sözmen, Kaan; Arfa, Chokri; Aissi, Wafa; Romdhane, Habiba Ben; Fouad, Fouad; Al-Ali, Radwan; Husseini, Abdullatif

2014-01-01

Background Coronary Heart Disease (CHD) is rising in middle income countries. Population based strategies to reduce specific CHD risk factors have an important role to play in reducing overall CHD mortality. Reducing dietary salt consumption is a potentially cost-effective way to reduce CHD events. This paper presents an economic evaluation of population based salt reduction policies in Tunisia, Syria, Palestine and Turkey. Methods and Findings Three policies to reduce dietary salt intake were evaluated: a health promotion campaign, labelling of food packaging and mandatory reformulation of salt content in processed food. These were evaluated separately and in combination. Estimates of the effectiveness of salt reduction on blood pressure were based on a literature review. The reduction in mortality was estimated using the IMPACT CHD model specific to that country. Cumulative population health effects were quantified as life years gained (LYG) over a 10 year time frame. The costs of each policy were estimated using evidence from comparable policies and expert opinion including public sector costs and costs to the food industry. Health care costs associated with CHDs were estimated using standardized unit costs. The total cost of implementing each policy was compared against the current baseline (no policy). All costs were calculated using 2010 PPP exchange rates. In all four countries most policies were cost saving compared with the baseline. The combination of all three policies (reducing salt consumption by 30%) resulted in estimated cost savings of $235,000,000 and 6455 LYG in Tunisia; $39,000,000 and 31674 LYG in Syria; $6,000,000 and 2682 LYG in Palestine and $1,3000,000,000 and 378439 LYG in Turkey. Conclusion Decreasing dietary salt intake will reduce coronary heart disease deaths in the four countries. A comprehensive strategy of health education and food industry actions to label and reduce salt content would save both money and lives. PMID:24409297

Cost of reproduction in a long-lived bird: incubation effort reduces immune function and future reproduction.

Science.gov (United States)

Hanssen, Sveinn Are; Hasselquist, Dennis; Folstad, Ivar; Erikstad, Kjell Einar

2005-05-22

Life-history theory predicts that increased current reproductive effort should lead to a fitness cost. This cost of reproduction may be observed as reduced survival or future reproduction, and may be caused by temporal suppression of immune function in stressed or hard-working individuals. In birds, consideration of the costs of incubating eggs has largely been neglected in favour of the costs of brood rearing. We manipulated incubation demand in two breeding seasons (2000 and 2001) in female common eiders (Somateria mollissima) by creating clutches of three and six eggs (natural range 3-6 eggs). The common eider is a long-lived sea-duck where females do not eat during the incubation period. Mass loss increased and immune function (lymphocyte levels and specific antibody response to the non-pathogenic antigens diphtheria and tetanus toxoid) was reduced in females incubating large clutches. The increased incubation effort among females assigned to large incubation demand did not lead to adverse effects on current reproduction or return rate in the next breeding season. However, large incubation demand resulted in long-term fitness costs through reduced fecundity the year after manipulation. Our data show that in eiders, a long-lived species, the cost of high incubation demand is paid in the currency of reduced future fecundity, possibly mediated by reduced immune function.

Reducing healthcare costs facilitated by surgical auditing: a systematic review.

Science.gov (United States)

Govaert, Johannes Arthuur; van Bommel, Anne Charlotte Madeline; van Dijk, Wouter Antonie; van Leersum, Nicoline Johanneke; Tollenaar, Robertus Alexandre Eduard Mattheus; Wouters, Michael Wilhemus Jacobus Maria

2015-07-01

Surgical auditing has been developed in order to benchmark and to facilitate quality improvement. The aim of this review is to determine if auditing combined with systematic feedback of information on process and outcomes of care results in lower costs of surgical care. A systematic search of published literature before 21-08-2013 was conducted in Pubmed, Embase, Web of Science, and Cochrane Library. Articles were selected if they met the inclusion criteria of describing a surgical audit with cost-evaluation. The systematic search resulted in 3608 papers. Six studies were identified as relevant, all showing a positive effect of surgical auditing on quality of healthcare and therefore cost savings was reported. Cost reductions ranging from $16 to $356 per patient were seen in audits evaluating general or vascular procedures. The highest potential cost reduction was described in a colorectal surgical audit (up to $1,986 per patient). All six identified articles in this review describe a reduction in complications and thereby a reduction in costs due to surgical auditing. Surgical auditing may be of greater value when high-risk procedures are evaluated, since prevention of adverse events in these procedures might be of greater clinical and therefore of greater financial impact. This systematic review shows that surgical auditing can function as a quality instrument and therefore as a tool to reduce costs. Since evidence is scarce so far, further studies should be performed to investigate if surgical auditing has positive effects to turn the rising healthcare costs around. In the future, incorporating (actual) cost analyses and patient-related outcome measures would increase the audits' value and provide a complete overview of the value of healthcare.

Standardized ultrasound templates for diagnosing appendicitis reduce annual imaging costs.

Science.gov (United States)

Nordin, Andrew B; Sales, Stephen; Nielsen, Jason W; Adler, Brent; Bates, David Gregory; Kenney, Brian

2018-01-01

Ultrasound is preferred over computed tomography (CT) for diagnosing appendicitis in children to avoid undue radiation exposure. We previously reported our experience in instituting a standardized appendicitis ultrasound template, which decreased CT rates by 67.3%. In this analysis, we demonstrate the ongoing cost savings associated with using this template. Retrospective chart review for the time period preceding template implementation (June 2012-September 2012) was combined with prospective review through December 2015 for all patients in the emergency department receiving diagnostic imaging for appendicitis. The type of imaging was recorded, and imaging rates and ultrasound test statistics were calculated. Estimated annual imaging costs based on pretemplate ultrasound and CT utilization rates were compared with post-template annual costs to calculate annual and cumulative savings. In the pretemplate period, ultrasound and CT rates were 80.2% and 44.3%, respectively, resulting in a combined annual cost of $300,527.70. Similar calculations were performed for each succeeding year, accounting for changes in patient volume. Using pretemplate rates, our projected 2015 imaging cost was $371,402.86; however, our ultrasound rate had increased to 98.3%, whereas the CT rate declined to 9.6%, yielding an annual estimated cost of $224,853.00 and a savings of $146,549.86. Since implementation, annual savings have steadily increased for a cumulative cost savings of $336,683.83. Standardizing ultrasound reports for appendicitis not only reduces the use of CT scans and the associated radiation exposure but also decreases annual imaging costs despite increased numbers of imaging studies. Continued cost reduction may be possible by using diagnostic algorithms. Copyright © 2017 Elsevier Inc. All rights reserved.

Using performance indicators to reduce cost uncertainty of China's CO2 mitigation goals

International Nuclear Information System (INIS)

Xu, Yuan

2013-01-01

Goals on absolute emissions and intensity play key roles in CO 2 mitigation. However, like cap-and-trade policies with price uncertainty, they suffer from significant uncertainty in abatement costs. This article examines whether an indicator could be established to complement CO 2 mitigation goals and help reduce cost uncertainty with a particular focus on China. Performance indicators on CO 2 emissions per unit of energy consumption could satisfy three criteria: compared with the mitigation goals, (i) they are more closely associated with active mitigation efforts and (ii) their baselines have more stable projections from historical trajectories. (iii) Their abatement costs are generally higher than other mitigation methods, particularly energy efficiency and conservation. Performance indicators could be used in the following way: if a CO 2 goal on absolute emissions or intensity is attained, the performance indicator should still reach a lower threshold as a cost floor. If the goal cannot be attained, an upper performance threshold should be achieved as a cost ceiling. The narrower cost uncertainty may encourage wider and greater mitigation efforts. - Highlights: ► CO 2 emissions per unit of energy consumption could act as performance indicators. ► Performance indicators are more closely related to active mitigation activities. ► Performance indicators have more stable historical trajectories. ► Abatement costs are higher for performance indicators than for other activities. ► Performance thresholds could reduce the cost uncertainty of CO 2 mitigation goals.

Device interactions in reducing the cost of tidal stream energy

International Nuclear Information System (INIS)

Vazquez, A.; Iglesias, G.

2015-01-01

Highlights: • Numerical modelling is used to estimate the levelised cost of tidal stream energy. • As a case study, a model of Lynmouth (UK) is implemented and successfully validated. • The resolution of the model allows the demarcation of individual devices on the model grid. • Device interactions reduce the available tidal resource and the cost increases significantly. - Abstract: The levelised cost of energy takes into account the lifetime generated energy and the costs associated with a project. The objective of this work is to investigate the effects of device interactions on the energy output and, therefore, on the levelised cost of energy of a tidal stream project, by means of numerical modelling. For this purpose, a case study is considered: Lynmouth (North Devon, UK), an area in the Bristol Channel in which the first tidal stream turbine was installed − a testimony of its potential as a tidal energy site. A state-of-the-art hydrodynamics model is implemented on a high-resolution computational grid, which allows the demarcation of the individual devices. The modification to the energy output resulting from interaction between turbines within the tidal farm is thus resolved for each individual turbine. The results indicate that significant changes in the levelised cost of energy values, of up to £0.221 kW h −1 , occur due to the aforementioned modifications, which should not be disregarded if the cost of tidal stream energy is to be minimised

An Active Learning Classifier for Further Reducing Diabetic Retinopathy Screening System Cost

Directory of Open Access Journals (Sweden)

Yinan Zhang

2016-01-01

Full Text Available Diabetic retinopathy (DR screening system raises a financial problem. For further reducing DR screening cost, an active learning classifier is proposed in this paper. Our approach identifies retinal images based on features extracted by anatomical part recognition and lesion detection algorithms. Kernel extreme learning machine (KELM is a rapid classifier for solving classification problems in high dimensional space. Both active learning and ensemble technique elevate performance of KELM when using small training dataset. The committee only proposes necessary manual work to doctor for saving cost. On the publicly available Messidor database, our classifier is trained with 20%–35% of labeled retinal images and comparative classifiers are trained with 80% of labeled retinal images. Results show that our classifier can achieve better classification accuracy than Classification and Regression Tree, radial basis function SVM, Multilayer Perceptron SVM, Linear SVM, and K Nearest Neighbor. Empirical experiments suggest that our active learning classifier is efficient for further reducing DR screening cost.

A reduced-cost iterated local search heuristic for the fixed-charge transportation problem

NARCIS (Netherlands)

Buson, Erika; Roberti, Roberto; Toth, Paolo

2014-01-01

The fixed-charge transportation problem (FCTP) is a generalization of the transportation problem where an additional fixed cost is paid for sending a flow from an origin to a destination. We propose an iterated local search heuristic based on the utilization of reduced costs for guiding the restart

Healthcare technology: physician collaboration in reducing the surgical cost.

Science.gov (United States)

Olson, Steven A; Obremskey, William T; Bozic, Kevin J

2013-06-01

The increasing cost of providing health care is a national concern. Healthcare spending related to providing hospital care is one of the primary drivers of healthcare spending in the United States. Adoption of advanced medical technologies accounts for the largest percentage of growth in healthcare spending in the United States when compared with other developed countries. Within the specialty of orthopaedic surgery, a variety of implants can result in similar outcomes for patients in several areas of clinical care. However, surgeons often do not know the cost of implants used in a specific procedure or how the use of an implant or technology affects the overall cost of the episode of care. The purposes of this study were (1) to describe physician-led processes for introduction of new surgical products and technologies; and (2) to inform physicians of potential cost savings of physician-led product contract negotiations and approval of new technology. We performed a detailed review of the steps taken by two centers that have implemented surgeon-led programs to demonstrate responsibility in technology acquisition and product procurement decision-making. Each program has developed a physician peer review process in technology and new product acquisition that has resulted in a substantial reduction in spending for the respective hospitals in regard to surgical implants. Implant costs have decreased between 3% and 38% using different negotiating strategies. At the same time, new product requests by physicians have been approved in greater than 90% of instances. Hospitals need physicians to be engaged and informed in discussions concerning current and new technology and products. Surgeons can provide leadership for these efforts to reduce the cost of high-quality care.

Fixed-point image orthorectification algorithms for reduced computational cost

Science.gov (United States)

French, Joseph Clinton

Imaging systems have been applied to many new applications in recent years. With the advent of low-cost, low-power focal planes and more powerful, lower cost computers, remote sensing applications have become more wide spread. Many of these applications require some form of geolocation, especially when relative distances are desired. However, when greater global positional accuracy is needed, orthorectification becomes necessary. Orthorectification is the process of projecting an image onto a Digital Elevation Map (DEM), which removes terrain distortions and corrects the perspective distortion by changing the viewing angle to be perpendicular to the projection plane. Orthorectification is used in disaster tracking, landscape management, wildlife monitoring and many other applications. However, orthorectification is a computationally expensive process due to floating point operations and divisions in the algorithm. To reduce the computational cost of on-board processing, two novel algorithm modifications are proposed. One modification is projection utilizing fixed-point arithmetic. Fixed point arithmetic removes the floating point operations and reduces the processing time by operating only on integers. The second modification is replacement of the division inherent in projection with a multiplication of the inverse. The inverse must operate iteratively. Therefore, the inverse is replaced with a linear approximation. As a result of these modifications, the processing time of projection is reduced by a factor of 1.3x with an average pixel position error of 0.2% of a pixel size for 128-bit integer processing and over 4x with an average pixel position error of less than 13% of a pixel size for a 64-bit integer processing. A secondary inverse function approximation is also developed that replaces the linear approximation with a quadratic. The quadratic approximation produces a more accurate approximation of the inverse, allowing for an integer multiplication calculation

The role of information technology (IT) in reducing offshore operating costs

International Nuclear Information System (INIS)

Stern, M.J.

1993-01-01

The rapid changes in information technology (IT) and its application have helped to improve efficiency and reduce operating costs offshore. Developments in IT itself, in terms of technology, organization and standards together with cultural change have created new opportunities. In the application of IT, the most significant impact on operations costs and effectiveness has come from the use of information throughout the life cycle, and improved telecommunications. This paper describes recent developments in IT and its application, and cites examples where oil companies have derived major benefits

Using the Steel Vessel Material-Cost Index to Mitigate Shipbuilder Risk

National Research Council Canada - National Science Library

Keating, Edward G; Murphy, Robert; Schank, John F; Birkler, John

2008-01-01

This paper describes how the US Navy structures fixed-price and fixed-price, incentive-fee shipbuilding contracts and how labor- and material-cost indexes can mitigate shipbuilder risk in either type of contract...

Rightsizing HVAC Systems to Reduce Capital Costs and Save Energy

Science.gov (United States)

Sebesta, James

2010-01-01

Nearly every institution is faced with the situation of having to reduce the cost of a construction project from time to time through a process generally referred to as "value engineering." Just the mention of those words, however, gives rise to all types of connotations, thoughts, and memories (usually negative) for those in the…

Application of porous material to reduce aerodynamic sound from bluff bodies

International Nuclear Information System (INIS)

Sueki, Takeshi; Takaishi, Takehisa; Ikeda, Mitsuru; Arai, Norio

2010-01-01

Aerodynamic sound derived from bluff bodies can be considerably reduced by flow control. In this paper, the authors propose a new method in which porous material covers a body surface as one of the flow control methods. From wind tunnel tests on flows around a bare cylinder and a cylinder with porous material, it has been clarified that the application of porous materials is effective in reducing aerodynamic sound. Correlation between aerodynamic sound and aerodynamic force fluctuation, and a surface pressure distribution of cylinders are measured to investigate a mechanism of aerodynamic sound reduction. As a result, the correlation between aerodynamic sound and aerodynamic force fluctuation exists in the flow around the bare cylinder and disappears in the flow around the cylinder with porous material. Moreover, the aerodynamic force fluctuation of the cylinder with porous material is less than that of the bare cylinder. The surface pressure distribution of the cylinder with porous material is quite different from that of the bare cylinder. These facts indicate that aerodynamic sound is reduced by suppressing the motion of vortices because aerodynamic sound is induced by the unstable motion of vortices. In addition, an instantaneous flow field in the wake of the cylinder is measured by application of the PIV technique. Vortices that are shed alternately from the bare cylinder disappear by application of porous material, and the region of zero velocity spreads widely behind the cylinder with porous material. Shear layers between the stationary region and the uniform flow become thin and stable. These results suggest that porous material mainly affects the flow field adjacent to bluff bodies and reduces aerodynamic sound by depriving momentum of the wake and suppressing the unsteady motion of vortices. (invited paper)

Preparation of Reduced Graphene Oxides as Electrode Materials for Supercapacitors

KAUST Repository

Bai, Yaocai

2012-01-01

Reduced graphene oxide as outstanding candidate electrode material for supercapacitor has been investigated. This thesis includes two topics. One is that three kinds of reduced graphene oxides were prepared by hydrothermal reduction under different

Preliminary Design of Industrial Symbiosis of Smes Using Material Flow Cost Accounting (MFCA) Method

Science.gov (United States)

Astuti, Rahayu Siwi Dwi; Astuti, Arieyanti Dwi; Hadiyanto

2018-02-01

Industrial symbiosis is a collaboration of several industries to share their necessities such material, energy, technology as well as waste management. As a part of industrial ecology, in principle, this system attempts to emulate ecosystem where waste of an organism is being used by another organism, therefore there is no waste in the nature. This system becomes an effort to optimize resources (material and energy) as well as minimize waste. Considerable, in a symbiosis incure material and energy flows among industries. Material and energy in an industry are known as cost carriers, thus flow analysis in this system can be conducted in perspective of material, energy and cost, or called as material flow cost accounting (MFCA) that is an economic and ecological appraisal approach. Previous researches shown that MFCA implementation could be used to evaluate an industry's environmental-related efficiency as well as in planning, business control and decision making. Moreover, the MFCA has been extended to assess environmental performance of SMEs Cluster or industrial symbiosis in SMEs Cluster, even to make preliminary design of an industrial symbiosis base on a major industry. This paper describes the use of MFCA to asses performance of SMEs industrial symbiosis and to improve the performance.

Preliminary Design of Industrial Symbiosis of Smes Using Material Flow Cost Accounting (MFCA Method

Directory of Open Access Journals (Sweden)

Siwi Dwi Astuti Rahayu

2018-01-01

Full Text Available Industrial symbiosis is a collaboration of several industries to share their necessities such material, energy, technology as well as waste management. As a part of industrial ecology, in principle, this system attempts to emulate ecosystem where waste of an organism is being used by another organism, therefore there is no waste in the nature. This system becomes an effort to optimize resources (material and energy as well as minimize waste. Considerable, in a symbiosis incure material and energy flows among industries. Material and energy in an industry are known as cost carriers, thus flow analysis in this system can be conducted in perspective of material, energy and cost, or called as material flow cost accounting (MFCA that is an economic and ecological appraisal approach. Previous researches shown that MFCA implementation could be used to evaluate an industry’s environmental-related efficiency as well as in planning, business control and decision making. Moreover, the MFCA has been extended to assess environmental performance of SMEs Cluster or industrial symbiosis in SMEs Cluster, even to make preliminary design of an industrial symbiosis base on a major industry. This paper describes the use of MFCA to asses performance of SMEs industrial symbiosis and to improve the performance.

Cost-Effectiveness of Sacubitril-Valsartan in Patients With Heart Failure With Reduced Ejection Fraction.

Science.gov (United States)

Sandhu, Alexander T; Ollendorf, Daniel A; Chapman, Richard H; Pearson, Steven D; Heidenreich, Paul A

2016-11-15

Sacubitril-valsartan therapy reduces cardiovascular mortality compared with enalapril therapy in patients with heart failure with reduced ejection fraction. To evaluate the cost-effectiveness of sacubitril-valsartan versus angiotensin-converting enzyme inhibitor therapy in patients with chronic heart failure. Markov decision model. Clinical trials, observational analyses, reimbursement data from the Centers for Medicare & Medicaid Services, drug pricing databases, and Centers for Disease Control and Prevention life tables. Patients at an average age of 64 years, New York Heart Association (NYHA) class II to IV heart failure, and left ventricular ejection fraction of 0.40 or less. Lifetime. Societal. Treatment with sacubitril-valsartan or lisinopril. Life-years, quality-adjusted life-years (QALYs), costs, heart failure hospitalizations, and incremental cost-effectiveness ratios. The sacubitril-valsartan group experienced 0.08 fewer heart failure hospitalization, 0.69 additional life-year, 0.62 additional QALY, and $29 203 in incremental costs, equating to a cost per QALY gained of $47 053. The cost per QALY gained was $44 531 in patients with NYHA class II heart failure and $58 194 in those with class III or IV heart failure. Sacubitril-valsartan treatment was most sensitive to the duration of improved outcomes, with a cost per QALY gained of $120 623 if the duration was limited to the length of the trial (median, 27 months). No variations in other parameters caused the cost to exceed $100 000 per QALY gained. The benefit of sacubitril-valsartan is based on a single clinical trial. Treatment with sacubitril-valsartan provides reasonable value in reducing cardiovascular mortality and morbidity in patients with NYHA class II to IV heart failure. U.S. Department of Veterans Affairs and Institute for Clinical and Economic Review.

Intraoperative costs of video-assisted thoracoscopic lobectomy can be dramatically reduced without compromising outcomes.

Science.gov (United States)

Richardson, Michael T; Backhus, Leah M; Berry, Mark F; Vail, Daniel G; Ayers, Kelsey C; Benson, Jalen A; Bhandari, Prasha; Teymourtash, Mehran; Shrager, Joseph B

2018-03-01

To determine whether surgeon selection of instrumentation and other supplies during video-assisted thoracoscopic lobectomy (VATSL) can safely reduce intraoperative costs. In this retrospective, cost-focused review of all video-assisted thoracoscopic surgery anatomic lung resections performed by 2 surgeons at a single institution between 2010 and 2014, we compared VATSL hospital costs and perioperative outcomes between the surgeons, as well as costs of VATSL compared with thoracotomy lobectomy (THORL). A total of 100 VATSLs were performed by surgeon A, and 70 were performed by surgeon B. The preoperative risk factors did not differ significantly between the 2 groups of surgeries. Mean VATSL total hospital costs per case were 24% percent greater for surgeon A compared with surgeon B (P = .0026). Intraoperative supply costs accounted for most of this cost difference and were 85% greater for surgeon A compared with surgeon B (P costs, accounting for 55% of the difference in intraoperative supply costs between the surgeons. Operative time was 25% longer for surgeon A compared with surgeon B (P accounted for only 11% of the difference in total cost. Surgeon A's overall VATSL costs per case were similar to those of THORLs (n = 100) performed over the same time period, whereas surgeon B's VATSL costs per case were 24% less than those of THORLs. On adjusted analysis, there was no difference in VATSL perioperative outcomes between the 2 surgeons. The costs of VATSL differ substantially among surgeons and are heavily influenced by the use of disposable equipment/devices. Surgeons can substantially reduce the costs of VATSL to far lower than those of THORL without compromising surgical outcomes through prudent use of costly instruments and technologies. Copyright © 2017 The American Association for Thoracic Surgery. All rights reserved.

A cost effectiveness analysis of salt reduction policies to reduce coronary heart disease in four Eastern Mediterranean countries.

Directory of Open Access Journals (Sweden)

Helen Mason

Full Text Available BACKGROUND: Coronary Heart Disease (CHD is rising in middle income countries. Population based strategies to reduce specific CHD risk factors have an important role to play in reducing overall CHD mortality. Reducing dietary salt consumption is a potentially cost-effective way to reduce CHD events. This paper presents an economic evaluation of population based salt reduction policies in Tunisia, Syria, Palestine and Turkey. METHODS AND FINDINGS: Three policies to reduce dietary salt intake were evaluated: a health promotion campaign, labelling of food packaging and mandatory reformulation of salt content in processed food. These were evaluated separately and in combination. Estimates of the effectiveness of salt reduction on blood pressure were based on a literature review. The reduction in mortality was estimated using the IMPACT CHD model specific to that country. Cumulative population health effects were quantified as life years gained (LYG over a 10 year time frame. The costs of each policy were estimated using evidence from comparable policies and expert opinion including public sector costs and costs to the food industry. Health care costs associated with CHDs were estimated using standardized unit costs. The total cost of implementing each policy was compared against the current baseline (no policy. All costs were calculated using 2010 PPP exchange rates. In all four countries most policies were cost saving compared with the baseline. The combination of all three policies (reducing salt consumption by 30% resulted in estimated cost savings of $235,000,000 and 6455 LYG in Tunisia; $39,000,000 and 31674 LYG in Syria; $6,000,000 and 2682 LYG in Palestine and $1,3000,000,000 and 378439 LYG in Turkey. CONCLUSION: Decreasing dietary salt intake will reduce coronary heart disease deaths in the four countries. A comprehensive strategy of health education and food industry actions to label and reduce salt content would save both money and lives.

Cost Analysis of the STONE Randomized Trial: Can Health Care Costs be Reduced One Test at a Time?

Science.gov (United States)

Melnikow, Joy; Xing, Guibo; Cox, Ginger; Leigh, Paul; Mills, Lisa; Miglioretti, Diana L; Moghadassi, Michelle; Smith-Bindman, Rebecca

2016-04-01

Decreasing the use of high-cost tests may reduce health care costs. To compare costs of care for patients presenting to the emergency department (ED) with suspected kidney stones randomized to 1 of 3 initial imaging tests. Patients were randomized to point-of-care ultrasound (POC US, least costly), radiology ultrasound (RAD US), or computed tomography (CT, most costly). Subsequent testing and treatment were the choice of the treating physician. A total of 2759 patients at 15 EDs were randomized to POC US (n=908), RAD US, (n=893), or CT (n=958). Mean age was 40.4 years; 51.8% were male. All medical care documented in the trial database in the 7 days following enrollment was abstracted and coded to estimate costs using national average 2012 Medicare reimbursements. Costs for initial ED care and total 7-day costs were compared using nonparametric bootstrap to account for clustering of patients within medical centers. Initial ED visit costs were modestly lower for patients assigned to RAD US: $423 ($411, $434) compared with patients assigned to CT: $448 ($438, $459) (Pcosts were not significantly different between groups: $1014 ($912, $1129) for POC US, $970 ($878, $1078) for RAD US, and $959 ($870, $1044) for CT. Hospital admissions contributed over 50% of total costs, though only 11% of patients were admitted. Mean total costs (and admission rates) varied substantially by site from $749 to $1239. Assignment to a less costly test had no impact on overall health care costs for ED patients. System-level interventions addressing variation in admission rates from the ED might have greater impact on costs.

Cheap-GSHPs, an European project aiming cost-reducing innovations for shallow geothermal installations. - Geological data reinterpretation

Science.gov (United States)

Bertermann, David; Müller, Johannes; Galgaro, Antonio; Cultrera, Matteo; Bernardi, Adriana; Di Sipio, Eloisa

2016-04-01

The success and widespread diffusion of new sustainable technologies are always strictly related to their affordability. Nowadays the energy price fluctuations and the economic crisis are jeopardizing the development and diffusion of renewable technologies and sources. With the aim of both reduce the overall costs of shallow geothermal systems and improve their installation safety, an European project has took place recently, under the Horizon 2020 EU Framework Programme for Research and Innovation. The acronym of this project is Cheap-GSHPs, meaning "cheap and efficient application of reliable ground source heat exchangers and pumps"; the CHEAP-GSHPs project involves 17 partners among 9 European countries such Belgium, France, Germany, Greece, Ireland, Italy, Romania, Spain, Switzerland. In order to achieve the planned targets, an holistic approach is adopted, where all involved elements that take part of shallow geothermal activities are here integrated. In order to reduce the drilling specific costs and for a solid planning basis the INSPIRE-conformal ESDAC data set PAR-MAT-DOM ("parent material dominant") was analysed and reinterpreted regarding the opportunities for cost reductions. Different ESDAC classification codes were analysed lithologically and sedimentologically in order to receive the most suitable drilling technique within different formations. Together with drilling companies this geological data set was translated into a geotechnical map which allows drilling companies the usage of the most efficient drilling within a certain type of underground. The scale of the created map is 1: 100,000 for all over Europe. This leads to cost reductions for the final consumers. Further there will be the definition of different heat conductivity classes based on the reinterpreted PAR-MAT-DOM data set which will provide underground information. These values will be reached by sampling data all over Europe and literature data. The samples will be measured by several

The cost-effectiveness of methanol for reducing motor vehicle emissions and urban ozone

International Nuclear Information System (INIS)

Krupnick, A.J.; Walls, M.A.

1992-01-01

This article analyzes the costs and emissions characteristics of methanol vehicles. The cost-effectiveness of methanol - the cost per ton of reactive hydrocarbon emissions reduced - is calculated and compared to the cost-effectiveness of other hydrocarbon reduction strategies. Methanol is found to cost from $33,000 to nearly $60,000 per ton, while several other options are available for under $10,000 per ton. The cost per part-per-million reduction in peak ambient ozone levels is also computed for two cities, Houston and Philadelphia. Despite the greater improvement in ozone in Philadelphia than Houston, methanol is found to be more cost-effective in Houston. This result occurs because Houston's distribution and marketing costs are lower than Philadelphia's. The costs in both cities, however, are far higher than estimates of the benefits from acute health improvements. Finally, the reduction in ozone exposure in Los Angeles is estimated and the costs of the reduction compared with an estimate of acute health benefits. Again, the benefits fall far short of the costs. 51 refs., 5 tabs

Cost and cost effectiveness of vaginal progesterone gel in reducing preterm birth: an economic analysis of the PREGNANT trial.

Science.gov (United States)

Pizzi, Laura T; Seligman, Neil S; Baxter, Jason K; Jutkowitz, Eric; Berghella, Vincenzo

2014-05-01

Preterm birth (PTB) is a costly public health problem in the USA. The PREGNANT trial tested the efficacy of vaginal progesterone (VP) 8 % gel in reducing the likelihood of PTB among women with a short cervix. We calculated the costs and cost effectiveness of VP gel versus placebo using decision analytic models informed by PREGNANT patient-level data. PREGNANT enrolled 459 pregnant women with a cervical length of 10-20 mm and randomized them to either VP 8 % gel or placebo. We used a cost model to estimate the total cost of treatment per mother and a cost-effectiveness model to estimate the cost per PTB averted with VP gel versus placebo. Patient-level trial data informed model inputs and included PTB rates in low- and high-risk women in each study group at <28 weeks gestation, 28-31, 32-36, and ≥37 weeks. Cost assumptions were based on 2010 US healthcare services reimbursements. The cost model was validated against patient-level data. Sensitivity analyses were used to test the robustness of the cost-effectiveness model. The estimated cost per mother was $US23,079 for VP gel and $US36,436 for placebo. The cost-effectiveness model showed savings of $US24,071 per PTB averted with VP gel. VP gel realized cost savings and cost effectiveness in 79 % of simulations. Based on findings from PREGNANT, VP gel was associated with cost savings and cost effectiveness compared with placebo. Future trials designed to include cost metrics are needed to better understand the value of VP.

Optimum value engineering and integrated design methods for reducing the cost of R-2000 houses

Energy Technology Data Exchange (ETDEWEB)

Proskiw, G. [Proskiw Engineering Ltd., Winnipeg, MB (Canada); Parekh, A. [Natural Resources Canada, Ottawa, ON (Canada)

2009-07-01

Opportunities exist to reduce the incremental cost of R-2000 construction by using optimum value engineering (OVE) and integrated design (ID) techniques. OVE is a construction philosophy in which components and systems are designed to meet their intended purposes without excessive or unnecessary use of resources. This paper summarized a study that was designed to identify opportunities for reducing the costs of R-2000 houses while improving their performance. These included detailed energy and cost analysis of various OVE/ID options which were then applied to a sample of 18 representative new home designs from British Columbia, Manitoba, and New Brunswick. The paper described the OVE/ID measures studied, cost analysis, measure utilization and energy analysis. It also included a detailed discussion of individual OVE/ID measures. Examples of some of these measures were the elimination of floor system cross-bridging; support of non-load bearing partition walls; engineered wood beams; drywall clips at corners; and non-load bearing partition walls. It was concluded that significant opportunities exist to reduce the incremental cost of R-2000 houses through careful application of OVE and ID practices. 5 refs., 4 tabs., 1 fig.

Cost-benefit analysis of decreased ventilation rates and radon exhalation from building materials

International Nuclear Information System (INIS)

Ericson, S.O.

1984-01-01

Decreased ventilation, achieved by weather stripping and other tightening measures, is the most cost effective way to energy conservation. A very low investment can result in a considerable decrease in ventilation rate. For a typical detached house in Sweden this can be equivalent to a decrease in oil consumption of 0.5 m 3 . At present price this corresponds to a saving of SEK 1200, 150 US dollars per annum. The contribution of the building materials to the concentration of radon in indoor air is approximately the inverse to air exchange rate. For a small change in ventilation rate and cost, in SEK/man Sv or US dollar/man Sv, is a function of ventilation rate, exhalation from building materials, the ratio between surface of walls, floor and ceiling to the volume of air. Thus, it is possible to find the specific ventilation rate where the marginal cost for a small increase in ventilation rate and the marginal reduction in radon concentration will give a specific amount of money for each man Sv. Examples are given. Conclusions are that for most building materials in a climate like the Swedish, there are other factors than exhalation of radon from building materials that sets the lower limit of recommendable ventilation rate. (Author)

Room temperature large-scale synthesis of layered frameworks as low-cost 4 V cathode materials for lithium ion batteries

Science.gov (United States)

Hameed, A. Shahul; Reddy, M. V.; Nagarathinam, M.; Runčevski, Tomče; Dinnebier, Robert E.; Adams, Stefan; Chowdari, B. V. R.; Vittal, Jagadese J.

2015-11-01

Li-ion batteries (LIBs) are considered as the best available technology to push forward the production of eco-friendly electric vehicles (EVs) and for the efficient utilization of renewable energy sources. Transformation from conventional vehicles to EVs are hindered by the high upfront price of the EVs and are mainly due to the high cost of LIBs. Hence, cost reduction of LIBs is one of the major strategies to bring forth the EVs to compete in the market with their gasoline counterparts. In our attempt to produce cheaper high-performance cathode materials for LIBs, an rGO/MOPOF (reduced graphene oxide/Metal-Organic Phosphate Open Framework) nanocomposite with ~4 V of operation has been developed by a cost effective room temperature synthesis that eliminates any expensive post-synthetic treatments at high temperature under Ar/Ar-H2. Firstly, an hydrated nanocomposite, rGO/K2[(VO)2(HPO4)2(C2O4)]·4.5H2O has been prepared by simple magnetic stirring at room temperature which releases water to form the anhydrous cathode material while drying at 90 °C during routine electrode fabrication procedure. The pristine MOPOF material undergoes highly reversible lithium storage, however with capacity fading. Enhanced lithium cycling has been witnessed with rGO/MOPOF nanocomposite which exhibits minimal capacity fading thanks to increased electronic conductivity and enhanced Li diffusivity.

Effects of worksite health interventions involving reduced work hours and physical exercise on sickness absence costs.

Science.gov (United States)

von Thiele Schwarz, Ulrica; Hasson, Henna

2012-05-01

To investigate the effects of physical exercise during work hours (PE) and reduced work hours (RWH) on direct and indirect costs associated with sickness absence (SA). Sickness absence and related costs at six workplaces, matched and randomized to three conditions (PE, RWH, and referents), were retrieved from company records and/or estimated using salary conversion methods or value-added equations on the basis of interview data. Although SA days decreased in all conditions (PE, 11.4%; RWH, 4.9%; referents, 15.9%), costs were reduced in the PE (22.2%) and RWH (4.9%) conditions but not among referents (10.2% increase). Worksite health interventions may generate savings in SA costs. Costs may not be linear to changes in SA days. Combing the friction method with indirect cost estimates on the basis of value-added productivity may help illuminate both direct and indirect SA costs.

Materials Genome Initiative

Data.gov (United States)

National Aeronautics and Space Administration — Develop computational tools to assist in the manufacture, design and certification of new materials and processes. These tools will reduce the time and costs to...

A cost-reducing extracorporeal membrane oxygenation (ECMO) program model: a single institution experience.

Science.gov (United States)

Cavarocchi, N C; Wallace, S; Hong, E Y; Tropea, A; Byrne, J; Pitcher, H T; Hirose, H

2015-03-01

The worldwide demand for ECMO support has grown. Its provision remains limited due to several factors (high cost, complicated technology, lack of expertise) that increase healthcare cost. Our goal was to assess if an intensive care unit (ICU)-run ECMO model without continuous bedside perfusionists would decrease costs while maintaining patient safety and outcomes. A new ECMO program was implemented in 2010, consisting of dedicated ICU multidisciplinary providers (ICU-registered nurses, mid-level providers and intensivists). In year one, we introduced an education platform, new technology and dedicated space. In year two, continuous bedside monitoring by perfusionists was removed and new management algorithms designating multidisciplinary providers as first responders were established. The patient safety and cost benefit from the removal of the continuous bedside monitoring of the perfusionists of this new ECMO program was retrospectively reviewed and compared. During the study period, 74 patients (28 patients in year 1 and 46 patients in year 2) were placed on ECMO (mean days: 8 ± 5.7). The total annual hospital expenditure for the ECMO program was significantly reduced in the new model ($234,000 in year 2 vs. $600,264 in year 1), showing a 61% decrease in cost. This cost decrease was attributed to a decreased utilization of perfusion services and the introduction of longer lasting and more efficient ECMO technology. We did not find any significant changes in registered nurse ratios or any differences in outcomes related to ICU safety events. We demonstrated that the ICU-run ECMO model managed to lower hospital cost by reducing the cost of continuous bedside perfusion support without a change in outcomes. © The Author(s) 2014.

Multifaceted intervention including education, rounding checklist implementation, cost feedback, and financial incentives reduces inpatient laboratory costs.

Science.gov (United States)

Yarbrough, Peter M; Kukhareva, Polina V; Horton, Devin; Edholm, Karli; Kawamoto, Kensaku

2016-05-01

Inappropriate laboratory testing is a contributor to waste in healthcare. To evaluate the impact of a multifaceted laboratory reduction intervention on laboratory costs. A retrospective, controlled, interrupted time series (ITS) study. University of Utah Health Care, a 500-bed academic medical center in Salt Lake City, Utah. All patients 18 years or older admitted to the hospital to a service other than obstetrics, rehabilitation, or psychiatry. Multifaceted quality-improvement initiative in a hospitalist service including education, process change, cost feedback, and financial incentive. Primary outcomes of lab cost per day and per visit. Secondary outcomes of number of basic metabolic panel (BMP), comprehensive metabolic panel (CMP), complete blood count (CBC), and prothrombin time/international normalized ratio tests per day; length of stay (LOS); and 30-day readmissions. A total of 6310 hospitalist patient visits (intervention group) were compared to 25,586 nonhospitalist visits (control group). Among the intervention group, the unadjusted mean cost per day was reduced from $138 before the intervention to $123 after the intervention (P analysis showed significant reductions in cost per day, cost per visit, and the number of BMP, CMP, and CBC tests per day (P = 0.034, 0.02, <0.001, 0.004, and <0.001). LOS was unchanged and 30-day readmissions decreased in the intervention group. A multifaceted approach to laboratory reduction demonstrated a significant reduction in laboratory cost per day and per visit, as well as common tests per day at a major academic medical center. Journal of Hospital Medicine 2016;11:348-354. © 2016 Society of Hospital Medicine. © 2016 Society of Hospital Medicine.

Does NGAL reduce costs? A cost analysis of urine NGAL (uNGAL) & serum creatinine (sCr) for acute kidney injury (AKI) diagnosis.

Science.gov (United States)

Parikh, Amay; Rizzo, John A; Canetta, Pietro; Forster, Catherine; Sise, Meghan; Maarouf, Omar; Singer, Eugenia; Elger, Antje; Elitok, Saban; Schmidt-Ott, Kai; Barasch, Jonathon; Nickolas, Thomas L

2017-01-01

Urine neutrophil gelatinase-associated lipocalin (uNGAL) is a sensitive and specific diagnostic test for acute kidney injury (AKI) in the Emergency Department (ED), but its economic impact has not been investigated. We hypothesized that uNGAL used in combination with serum creatinine (sCr) would reduce costs in the management of AKI in patients presenting to the ED in comparison to using sCr alone. A cost simulation model was developed for clinical algorithms to diagnose AKI based on sCr alone vs. uNGAL plus sCr (uNGAL+sCr). A cost minimization analysis was performed to determine total expected costs for patients with AKI. uNGAL test characteristics were validated with eight-hundred forty-nine patients with sCr ≥1.5 from a completed study of 1635 patients recruited from EDs at two U.S. hospitals from 2007-8. Biomarker test, AKI work-up, and diagnostic imaging costs were incorporated. For a hypothetical cohort of 10,000 patients, the model predicted that the expected costs were $900 per patient (pp) in the sCr arm and $950 in the uNGAL+sCr arm. uNGAL+sCr resulted in 1,578 fewer patients with delayed diagnosis and treatment than sCr alone (2,013 vs. 436 pts) at center 1 and 1,973 fewer patients with delayed diagnosis and treatment than sCr alone at center 2 (2,227 vs. 254 patients). Although initial evaluation costs at each center were $50 pp higher in with uNGAL+sCr, total costs declined by $408 pp at Center 1 and by $522 pp at Center 2 due to expected reduced delays in diagnosis and treatment. Sensitivity analyses confirmed savings with uNGAL + sCr for a range of cost inputs. Using uNGAL with sCr as a clinical diagnostic test for AKI may improve patient management and reduce expected costs. Any cost savings would likely result from avoiding delays in diagnosis and treatment and from avoidance of unnecessary testing in patients given a false positive AKI diagnosis by use of sCr alone.

Does NGAL reduce costs? A cost analysis of urine NGAL (uNGAL & serum creatinine (sCr for acute kidney injury (AKI diagnosis.

Directory of Open Access Journals (Sweden)

Amay Parikh

Full Text Available Urine neutrophil gelatinase-associated lipocalin (uNGAL is a sensitive and specific diagnostic test for acute kidney injury (AKI in the Emergency Department (ED, but its economic impact has not been investigated. We hypothesized that uNGAL used in combination with serum creatinine (sCr would reduce costs in the management of AKI in patients presenting to the ED in comparison to using sCr alone.A cost simulation model was developed for clinical algorithms to diagnose AKI based on sCr alone vs. uNGAL plus sCr (uNGAL+sCr. A cost minimization analysis was performed to determine total expected costs for patients with AKI. uNGAL test characteristics were validated with eight-hundred forty-nine patients with sCr ≥1.5 from a completed study of 1635 patients recruited from EDs at two U.S. hospitals from 2007-8. Biomarker test, AKI work-up, and diagnostic imaging costs were incorporated.For a hypothetical cohort of 10,000 patients, the model predicted that the expected costs were $900 per patient (pp in the sCr arm and $950 in the uNGAL+sCr arm. uNGAL+sCr resulted in 1,578 fewer patients with delayed diagnosis and treatment than sCr alone (2,013 vs. 436 pts at center 1 and 1,973 fewer patients with delayed diagnosis and treatment than sCr alone at center 2 (2,227 vs. 254 patients. Although initial evaluation costs at each center were $50 pp higher in with uNGAL+sCr, total costs declined by $408 pp at Center 1 and by $522 pp at Center 2 due to expected reduced delays in diagnosis and treatment. Sensitivity analyses confirmed savings with uNGAL + sCr for a range of cost inputs.Using uNGAL with sCr as a clinical diagnostic test for AKI may improve patient management and reduce expected costs. Any cost savings would likely result from avoiding delays in diagnosis and treatment and from avoidance of unnecessary testing in patients given a false positive AKI diagnosis by use of sCr alone.

Preliminary analysis about reducing production costs in uranium mining and metallurgy at Fuzhou uranium mine

International Nuclear Information System (INIS)

Wu Sanmao

1999-01-01

The production costs in uranium ming and metallurgy have been analyzed quantitatively term by term according to present production situation for The Uranium Mining and Metallurgy Corp, which is part of Fuzhou Uranium Mine. The principal factors influencing on the production costs and the main means reducing the production costs have been found

Cost-effectiveness of newborn circumcision in reducing lifetime HIV risk among U.S. males.

Directory of Open Access Journals (Sweden)

Stephanie L Sansom

Full Text Available BACKGROUND: HIV incidence was substantially lower among circumcised versus uncircumcised heterosexual African men in three clinical trials. Based on those findings, we modeled the potential effect of newborn male circumcision on a U.S. male's lifetime risk of HIV, including associated costs and quality-adjusted life-years saved. METHODOLOGY/PRINCIPAL FINDINGS: Given published estimates of U.S. males' lifetime HIV risk, we calculated the fraction of lifetime risk attributable to heterosexual behavior from 2005-2006 HIV surveillance data. We assumed 60% efficacy of circumcision in reducing heterosexually-acquired HIV over a lifetime, and varied efficacy in sensitivity analyses. We calculated differences in lifetime HIV risk, expected HIV treatment costs and quality-adjusted life years (QALYs among circumcised versus uncircumcised males. The main outcome measure was cost per HIV-related QALY saved. Circumcision reduced the lifetime HIV risk among all males by 15.7% in the base case analysis, ranging from 7.9% for white males to 20.9% for black males. Newborn circumcision was a cost-saving HIV prevention intervention for all, black and Hispanic males. The net cost of newborn circumcision per QALY saved was $87,792 for white males. Results were most sensitive to the discount rate, and circumcision efficacy and cost. CONCLUSIONS/SIGNIFICANCE: Newborn circumcision resulted in lower expected HIV-related treatment costs and a slight increase in QALYs. It reduced the 1.87% lifetime risk of HIV among all males by about 16%. The effect varied substantially by race and ethnicity. Racial and ethnic groups who could benefit the most from circumcision may have least access to it due to insurance coverage and state Medicaid policies, and these financial barriers should be addressed. More data on the long-term protective effect of circumcision on heterosexual males as well as on its efficacy in preventing HIV among MSM would be useful.

Fitness costs of animal medication: antiparasitic plant chemicals reduce fitness of monarch butterfly hosts.

Science.gov (United States)

Tao, Leiling; Hoang, Kevin M; Hunter, Mark D; de Roode, Jacobus C

2016-09-01

The emerging field of ecological immunology demonstrates that allocation by hosts to immune defence against parasites is constrained by the costs of those defences. However, the costs of non-immunological defences, which are important alternatives to canonical immune systems, are less well characterized. Estimating such costs is essential for our understanding of the ecology and evolution of alternative host defence strategies. Many animals have evolved medication behaviours, whereby they use antiparasitic compounds from their environment to protect themselves or their kin from parasitism. Documenting the costs of medication behaviours is complicated by natural variation in the medicinal components of diets and their covariance with other dietary components, such as macronutrients. In the current study, we explore the costs of the usage of antiparasitic compounds in monarch butterflies (Danaus plexippus), using natural variation in concentrations of antiparasitic compounds among plants. Upon infection by their specialist protozoan parasite Ophryocystis elektroscirrha, monarch butterflies can selectively oviposit on milkweed with high foliar concentrations of cardenolides, secondary chemicals that reduce parasite growth. Here, we show that these antiparasitic cardenolides can also impose significant costs on both uninfected and infected butterflies. Among eight milkweed species that vary substantially in their foliar cardenolide concentration and composition, we observed the opposing effects of cardenolides on monarch fitness traits. While high foliar cardenolide concentrations increased the tolerance of monarch butterflies to infection, they reduced the survival rate of caterpillars to adulthood. Additionally, although non-polar cardenolide compounds decreased the spore load of infected butterflies, they also reduced the life span of uninfected butterflies, resulting in a hump-shaped curve between cardenolide non-polarity and the life span of infected butterflies

Determination of the reduced matrix of the piezoelectric, dielectric, and elastic material constants for a piezoelectric material with C∞ symmetry.

Science.gov (United States)

Sherrit, Stewart; Masys, Tony J; Wiederick, Harvey D; Mukherjee, Binu K

2011-09-01

We present a procedure for determining the reduced piezoelectric, dielectric, and elastic coefficients for a C(∞) material, including losses, from a single disk sample. Measurements have been made on a Navy III lead zirconate titanate (PZT) ceramic sample and the reduced matrix of coefficients for this material is presented. In addition, we present the transform equations, in reduced matrix form, to other consistent material constant sets. We discuss the propagation of errors in going from one material data set to another and look at the limitations inherent in direct calculations of other useful coefficients from the data.

A new coating material for reducing indoor radon level

International Nuclear Information System (INIS)

Zhuo, W.; Tokonami, S.; Ichitsubo, H.; Yamada, Y.; Yamada, Y.

2002-01-01

In order to mitigate indoor radon level, a new fast-setting, solvent-free, polyurethane-based coating material was developed. The permeability of radon gas in the new material was estimated with a simple radon permeation test system set up in this study. It was found that the permeation velocity depended on the thickness of the coating material, and a thickness of 2.0 mm of the coating material seems sufficient for preventing radon permeation. The permeability of radon in the coating material was estimated to be (2.2± 0.8)x10 -10 m 2 ·s -1 for a thickness of about 1.0 mm. The value is much lower than those reported for membrane materials and caulking compounds. For its performance test, the coating material was used in an existing room with high radon level. By spraying a thickness of 1.5 mm of the material, the indoor radon level reduced by about 80%

Economic feasibility of invesment alternatives for reducing torula yeast' production cost

International Nuclear Information System (INIS)

Torres Fernández, Alfredo; Díaz de los Ríos, Manuel; Saura Laria, Gustavo

2016-01-01

The prices of ammonium salts which are used in the torula yeast production technology are very high nowadays. In the other hand, this technology has very high energy costs which are consumed by blowers in fermentation, separators machines and in the concentration and drying of yeast. In this paper, different technical alternatives are analyzed for reducing the production cost of torula yeast, through changes in production inputs, electric motors and the replacement of a portion of the fuel used for drying by biogas. Then, the economic feasibility in both currencies is evaluated for practical application. (author)

ECONOMIC FEASIBILITY OF INVESMENT ALTERNATIVES FOR REDUCING TORULA YEAST' PRODUCTION COST

Directory of Open Access Journals (Sweden)

Alfredo Torres Fernández

2016-01-01

Full Text Available The prices of ammonium salts which are used in the torula yeast production technology are very high nowadays. In the other hand, this technology has very high energy costs which are consumed by blowers in fermentation, separators machines and in the concentration and drying of yeast. In this paper, different technical alternatives are analyzed for reducing the production cost of torula yeast, through changes in production inputs, electric motors and the replacement of a portion of the fuel used for drying by biogas. Then, the economic feasibility in both currencies is evaluated for practical application.

Main means for reducing the production costs in process of leaching uranium

International Nuclear Information System (INIS)

Jiang Lang

2000-01-01

The production costs in process of leaching uranium have been reduced by controlling mixture ratio of crudes, milling particle size, liquid/solid mass ratio of leaching pulp, potential and residue acidity, and improving power equipment

Incorrect predictions reduce switch costs.

Science.gov (United States)

Kleinsorge, Thomas; Scheil, Juliane

2015-07-01

In three experiments, we combined two sources of conflict within a modified task-switching procedure. The first source of conflict was the one inherent in any task switching situation, namely the conflict between a task set activated by the recent performance of another task and the task set needed to perform the actually relevant task. The second source of conflict was induced by requiring participants to guess aspects of the upcoming task (Exps. 1 & 2: task identity; Exp. 3: position of task precue). In case of an incorrect guess, a conflict accrues between the representation of the guessed task and the actually relevant task. In Experiments 1 and 2, incorrect guesses led to an overall increase of reaction times and error rates, but they reduced task switch costs compared to conditions in which participants predicted the correct task. In Experiment 3, incorrect guesses resulted in faster performance overall and to a selective decrease of reaction times in task switch trials when the cue-target interval was long. We interpret these findings in terms of an enhanced level of controlled processing induced by a combination of two sources of conflict converging upon the same target of cognitive control. Copyright © 2015 Elsevier B.V. All rights reserved.

Systems/cost summary

International Nuclear Information System (INIS)

Grand, P.; Danby, G.; Keane, J.; Spiro, J.; Sutter, D.; Cole, F.; Hoyer, E.; Freytag, K.; Burke, R.

1977-01-01

The purpose of the meeting was to discuss and develop cost-estimating methods for heavy-ion fusion accelerator systems. The group did not consider that its purpose was to make technical judgements on proposed systems, but to develop methods for making reasonable cost estimates of these systems. Such estimates will, it is hoped, provide material for systems studies, will help in guiding research and development efforts by identifying ''high-leverage'' subsystems (areas that account for a significant part of total system cost and that might be reduced in cost by further technical development) and to begin to provide data to aid in an eventual decision on the optimum type of accelerator for heavy-ion fusion

Making renewable energy competitive in India: Reducing financing costs via a government-sponsored hedging facility

International Nuclear Information System (INIS)

Farooquee, Arsalan Ali; Shrimali, Gireesh

2016-01-01

In India, a significant barrier to market-competitiveness of renewable energy is a shortage of attractive debt. Domestic debt has high cost, short tenors, and variable interest rates, adding 30% to the cost of renewable energy compared to renewable energy projects elsewhere. Foreign debt is as expensive as domestic debt because it requires costly market-based currency hedging solutions. We investigate a government-sponsored foreign exchange facility as an alternative to reducing hedging costs. Using the geometric Brownian motion (GBM) as a representative stochastic model of the INR–USD foreign exchange rate, we find that the expected cost of providing a currency hedge via this facility is 3.5 percentage points, 50% lower than market. This leads to an up to 9% reduction in the per unit cost of renewable energy. However, this requires the government to manage the risks related to unexpected currency movements appropriately. One option to manage these risks is via a capital buffer; for the facility to obtain India's sovereign rating, the capital buffer would need to be almost 30% of the underlying loan. Our findings have significant policy implications given that the Indian government can use this facility to make renewable energy more competitive and, therefore, hasten its deployment. - Highlights: • We analyze a government-sponsored foreign exchange facility in India. •We use geometric Brownian motion to represent the INR–USD exchange rate. •This facility can reduce the currency hedging costs by 50%. •This facility can reduce the levelized cost of renewable energy by 9%. •The capital buffer to reach India's sovereign rating is 30% of the original loan.

Estimating the marginal cost of reducing global fossil fuel CO2 emissions

International Nuclear Information System (INIS)

Edmonds, J.; Barns, D.W.; McDonald, S.

1992-01-01

This paper estimates the marginal, total, and average cost and effectiveness of carbon taxes applied either by the Organization for Economic Cooperation and Development (OECD) members alone, or as part of a global cooperative strategy, to reduce potential future emissions and their direct implications for employment in the US coal industry. Two sets of cases are examined, one set in which OECD members acts alone, and another set in which the world acts in concert. In each case set taxes are examined which achieve four alternative levels of emissions reduction: halve the rate of emissions growth, no emissions growth, 20% reduction from 1988 levels, and 50% reduction from 1988 levels. For the global cooperation case, carbon tax rates of $32, $113, $161, and $517 per metric ton of carbon (mtC) were needed in the year 2025 to achieve the objectives. Total costs were respectively $40, $178, $253, and $848 billions of 1990 US dollars per year in the year 2025. Average costs were $32, $55, $59, and $135 per mtC. Costs were significantly higher in the cases in which the OECD members states acted alone. OECD member states, acting alone, could not reduce global emissions by 50% or 20% relative to 1988, given reference case assumptions regarding developing and recently planned nations economic growth

Income Tax Returns: Reducing Compliance Costs for Personal Income Taxpayers in Slovenia

Directory of Open Access Journals (Sweden)

Maja Klun

2009-06-01

Full Text Available Simplifying procedures and improving legislation generally lead to a reduction in the compliance costs. The introduction of pre-filled tax returns clearly simplifies the tax compliance procedure. Before the introduction of pre-filled tax returns for personal income taxpayers in Slovenia, tax legislation was also modified. This paper presents the results of research into the compliance costs for personal income taxpayers before and after the simplification of the compliance procedure in Slovenia, irrespective of tax legislation itself not being simplified. The results indicate that pre-filled tax returns reduce compliance costs for personal income taxpayers by around 73%. Nevertheless, this is only a tentative estimate, since several assumptions are taken into account.

MaMR: High-performance MapReduce programming model for material cloud applications

Science.gov (United States)

Jing, Weipeng; Tong, Danyu; Wang, Yangang; Wang, Jingyuan; Liu, Yaqiu; Zhao, Peng

2017-02-01

With the increasing data size in materials science, existing programming models no longer satisfy the application requirements. MapReduce is a programming model that enables the easy development of scalable parallel applications to process big data on cloud computing systems. However, this model does not directly support the processing of multiple related data, and the processing performance does not reflect the advantages of cloud computing. To enhance the capability of workflow applications in material data processing, we defined a programming model for material cloud applications that supports multiple different Map and Reduce functions running concurrently based on hybrid share-memory BSP called MaMR. An optimized data sharing strategy to supply the shared data to the different Map and Reduce stages was also designed. We added a new merge phase to MapReduce that can efficiently merge data from the map and reduce modules. Experiments showed that the model and framework present effective performance improvements compared to previous work.

Space system production cost benefits from contemporary philosophies in management and manufacturing

Science.gov (United States)

Rosmait, Russell L.

1991-01-01

The cost of manufacturing space system hardware has always been expensive. The Engineering Cost Group of the Program Planning office at Marshall is attempting to account for cost savings that result from new technologies in manufacturing and management. The objective is to identify and define contemporary philosophies in manufacturing and management. The seven broad categories that make up the areas where technological advances can assist in reducing space system costs are illustrated. Included within these broad categories is a list of the processes or techniques that specifically provide the cost savings within todays design, test, production and operations environments. The processes and techniques listed achieve savings in the following manner: increased productivity; reduced down time; reduced scrap; reduced rework; reduced man hours; and reduced material costs. In addition, it should be noted that cost savings from production and processing improvements effect 20 to 40 pct. of production costs whereas savings from management improvements effects 60 to 80 of production cost. This is important because most efforts in reducing costs are spent trying to reduce cost in the production.

Optimisation of integrated energy and materials systems

International Nuclear Information System (INIS)

Gielen, D.J.; Okken, P.A.

1994-06-01

To define cost-effective long term CO2 reduction strategies an integrated energy and materials system model for the Netherlands for the period 2000-2040 is developed. The model is based upon the energy system model MARKAL, which configures an optimal mix of technologies to satisfy the specified energy and product/materials service demands. This study concentrates on CO 2 emission reduction in the materials system. For this purpose, the energy system model is enlarged with a materials system model including all steps 'from cradle to grave'. The materials system model includes 29 materials, 20 product groups and 30 waste materials. The system is divided into seven types of technologies; 250 technologies are modeled. The results show that the integrated optimisation of the energy system and the materials system can significantly reduce the emission reduction costs, especially at higher reduction percentages. The reduction is achieved through shifts in materials production and waste handling and through materials substitution in products. Shifts in materials production and waste management seem cost-effective, while the cost-effectiveness of shifts in product composition is sensitive due to the cost structure of products. For the building sector, transportation applications and packaging, CO 2 policies show a significant impact on prices, and shifts in product composition could occur. For other products, the reduction through materials substitution seems less promising. The impact on materials consumption seems most significant for cement (reduced), timber and aluminium (both increased). For steel and plastics, the net effect is balanced, but shifts between applications do occur. The MARKAL-approach is feasible to study integrated energy and materials systems. The progress compared to other environmental system analysis instruments is much more insight in the interaction of technologies on a national scale and in time

Fuel costs of a light water reactor with fissile material recycling

International Nuclear Information System (INIS)

Clauss, J.

1984-01-01

In the light of the present prices of natural uranium and separative work and fabrication costs, savings can be achieved by reloading recycled fissile material. As in all recycling techniques, the product recovered cannot meet the whole new requirement. No excessive economic expectations should be associated with fissile material recycling in ligth water reactors. The main advantages of the procedure are the conservation of resources and the safety against proliferation. Besides, the original purpose of reprocessing should not be forgotten, i.e., in addition to the recycling of fissile material, to have a safe and easy method of secular disposal of high level waste (concentrated fission products). (orig.) [de

IFMIF, International Fusion Materials Irradiation Facility conceptual design activity cost report

International Nuclear Information System (INIS)

Rennich, M.J.

1996-12-01

This report documents the cost estimate for the International Fusion Materials Irradiation Facility (IFMIF) at the completion of the Conceptual Design Activity (CDA). The estimate corresponds to the design documented in the Final IFMIF CDA Report. In order to effectively involve all the collaborating parties in the development of the estimate, a preparatory meeting was held at Oak Ridge National Laboratory in March 1996 to jointly establish guidelines to insure that the estimate was uniformly prepared while still permitting each country to use customary costing techniques. These guidelines are described in Section 4. A preliminary cost estimate was issued in July 1996 based on the results of the Second Design Integration Meeting, May 20--27, 1996 at JAERI, Tokai, Japan. This document served as the basis for the final costing and review efforts culminating in a final review during the Third IFMIF Design Integration Meeting, October 14--25, 1996, ENEA, Frascati, Italy. The present estimate is a baseline cost estimate which does not apply to a specific site. A revised cost estimate will be prepared following the assignment of both the site and all the facility responsibilities

Effect of reducing cost sharing for outpatient care on children's inpatient services in Japan.

Science.gov (United States)

Kato, Hirotaka; Goto, Rei

2017-08-15

Assessing the impact of cost sharing on healthcare utilization is a critical issue in health economics and health policy. It may affect the utilization of different services, but is yet to be well understood. This paper investigates the effects of reducing cost sharing for outpatient services on hospital admissions by exploring a subsidy policy for children's outpatient services in Japan. Data were extracted from the Japanese Diagnosis Procedure Combination database for 2012 and 2013. A total of 366,566 inpatients from 1390 municipalities were identified. The impact of expanding outpatient care subsidy on the volume of inpatient care for 1390 Japanese municipalities was investigated using the generalized linear model with fixed effects. A decrease in cost sharing for outpatient care has no significant effect on overall hospital admissions, although this effect varies by region. The subsidy reduces the number of overall admissions in low-income areas, but increases it in high-income areas. In addition, the results for admissions by type show that admissions for diagnosis increase particularly in high-income areas, but emergency admissions and ambulatory-care-sensitive-condition admissions decrease in low-income areas. These results suggest that outpatient and inpatient services are substitutes in low-income areas but complements in high-income ones. Although the subsidy for children's healthcare would increase medical costs, it would not improve the health status in high-income areas. Nevertheless, it could lead to some health improvements in low-income areas and, to some extent, offset costs by reducing admissions in these regions.

An overview of recent progress using low-cost and cost-effective composite materials and processes to produce SSC magnet coils and associated non-metallic parts

International Nuclear Information System (INIS)

Morena, J.

1992-01-01

Thermoplastic and thermoset polymer systems have been used in high-energy physics applications throughout the world for many years. Like other industries and industrial communities, the materials and processes requirements of these polymers have recently taken on new meanings. New accelerators and other machines are pushing all material parameters beyond limits. New polymeric and composite materials are being developed, invented, and formulated, as is new process and application equipment. This is a decade of change. Composite materials are being chosen for performance characteristics and cost-effective processing as well. The information that follows will note some of the recent progress in the development of composite materials and processes for producing low-cost and cost-effective, high-quality, non-metallic composite components for use in SSC magnets and in other accelerators. The materials and methods for making composite molds, tools, and structural parts for magnet coils and other components are demonstrated. New, unique, and innovative approaches for processing thermoset polymers are presented. The formulated polymer systems are used to form semi and structural insulators, spacers, supports, coil end parts, blocks, housings, adhesives, and other composite applications

The System 80+ standard plant design reduces operations and maintenance costs

International Nuclear Information System (INIS)

Chari, D.R.; Robertson, J.E.

1998-01-01

To be cost-competitive, nuclear power plants must maximize plant availability and minimize operations and maintenance (O and M) costs. A plant whose design supports these goals will generate more power at less cost and thereby have a lower unit generating cost. The ABB Combustion Engineering Nuclear Systems (ABB-CE) System 80+ Standard Nuclear Power Plant, rated at 1400 megawatts electric (MWe), is designed for high availability at reduced cost. To demonstrate that the duration of refueling outages, the major contributor to plant unavailability, can be shortened, ABB-CE developed a detailed plan that shows a System 80+ plant can safely perform a refueling and maintenance outage in 18 days. This is a significant reduction from the average current U.S. plant outages of 45 days, and is possible due to a two-part outage strategy: use System 80+ advanced system design features and relaxed technical specification (TS) time limits to shift some maintenance from outages to operating periods: and, use System 80+ structural, system, and component features, such as the larger operating floor, permanent pool seal, integral reactor head area cable tray system and missile shield, and longer life reactor coolant pump seals, to reduce the scope and duration of outage maintenance activities. Plant staffing level is the major variable, or controllable contributor to operations costs. ABB-CE worked with the Institute of Nuclear Power Operations (INPO) to perform detailed staffing analyses that show a System 80+ plant can be operated reliably with 30 percent less staff than currently operating nuclear plants of similar size. Safety was not sacrificed when ABB-CE developed the System 80+ refueling outage plan and staffing level. The outage plan was developed utilizing a defense-in-depth concept for shutdown safety. The defense in-depth concept is implemented via systematic control of outage risk evaluation (SCORE) cards. The SCORE cards identify primary and alternate means of

Navy Ordnance Analysis of Business Area Efforts to Streamline Operations and Reduce Costs

National Research Council Canada - National Science Library

1997-01-01

.... The Navy reorganized this business area in 1993 in order to reduce costs and address various deficiencies in ordnance logistics management that were identified during Desert Shield/Desert Storm...

Spring-like Ankle Foot Orthoses reduce the energy cost of walking by taking over ankle work.

Science.gov (United States)

Bregman, D J J; Harlaar, J; Meskers, C G M; de Groot, V

2012-01-01

In patients with central neurological disorders, gait is often limited by a reduced ability to push off with the ankle. To overcome this reduced ankle push-off, energy-storing, spring-like carbon-composite Ankle Foot Orthoses (AFO) can be prescribed. It is expected that the energy returned by the AFO in late stance will support ankle push-off, and reduce the energy cost of walking. In 10 patients with multiple sclerosis and stroke the energy cost of walking, 3D kinematics, joint power, and joint work were measured during gait, with and without the AFO. The mechanical characteristics of the AFO were measured separately, and used to calculate the contribution of the AFO to the ankle kinetics. We found a significant decrease of 9.8% in energy cost of walking when walking with the AFO. With the AFO, the range of motion of the ankle was reduced by 12.3°, and the net work around the ankle was reduced by 29%. The total net work in the affected leg remained unchanged. The AFO accounted for 60% of the positive ankle work, which reduced the total amount of work performed by the leg by 11.1% when walking with the AFO. The decrease in energy cost when walking with a spring-like energy-storing AFO in central neurological patients is not induced by an augmented net ankle push-off, but by the AFO partially taking over ankle work. Copyright © 2011 Elsevier B.V. All rights reserved.

Room temperature large-scale synthesis of layered frameworks as low-cost 4 V cathode materials for lithium ion batteries

Science.gov (United States)

Hameed, A. Shahul; Reddy, M. V.; Nagarathinam, M.; Runčevski, Tomče; Dinnebier, Robert E; Adams, Stefan; Chowdari, B. V. R.; Vittal, Jagadese J.

2015-01-01

Li-ion batteries (LIBs) are considered as the best available technology to push forward the production of eco-friendly electric vehicles (EVs) and for the efficient utilization of renewable energy sources. Transformation from conventional vehicles to EVs are hindered by the high upfront price of the EVs and are mainly due to the high cost of LIBs. Hence, cost reduction of LIBs is one of the major strategies to bring forth the EVs to compete in the market with their gasoline counterparts. In our attempt to produce cheaper high-performance cathode materials for LIBs, an rGO/MOPOF (reduced graphene oxide/Metal-Organic Phosphate Open Framework) nanocomposite with ~4 V of operation has been developed by a cost effective room temperature synthesis that eliminates any expensive post-synthetic treatments at high temperature under Ar/Ar-H2. Firstly, an hydrated nanocomposite, rGO/K2[(VO)2(HPO4)2(C2O4)]·4.5H2O has been prepared by simple magnetic stirring at room temperature which releases water to form the anhydrous cathode material while drying at 90 °C during routine electrode fabrication procedure. The pristine MOPOF material undergoes highly reversible lithium storage, however with capacity fading. Enhanced lithium cycling has been witnessed with rGO/MOPOF nanocomposite which exhibits minimal capacity fading thanks to increased electronic conductivity and enhanced Li diffusivity. PMID:26593096

Life cycle cost of different Walling material used for affordable housing in tropics

Directory of Open Access Journals (Sweden)

Chameera Udawattha

2017-12-01

The results show that mud concrete block is the most suitable walling material. The brick has the highest account for the embedded energy. The hollow cement block is the worse building materials in tropics and its carbon footprint is comparatively higher. Even though the brick has higher embedded energy and construction cost, in a long run brick is less expensive than hollow cement block and Cabook walling material. Concluding, mud concrete block is comparatively most sustainable walling material for building affordable housing in tropics.

Construction cost impacts related to manpower, material, and equipment factors in contractor firms perspective

Science.gov (United States)

Husin, Saiful; Abdullah, Riza, Medyan; Afifuddin, Mochammad

2017-11-01

Risk can be defined as consequences which possible happened inscrutably. Although an activity has planned as good as possible, but it keep contains uncertainty. Implementation of construction project was encountering various risk impacts from a number of risk factors. This study was intended to analyze the impacts of construction cost to for contractor firms as construction project executor related to the factors of manpower, material and equipment. The study was using data obtained from questionnaires distributed to 15 large qualification contractor firms. The period of study classified into conflict period (2000-2004), post tsunami disaster rehabilitation and reconstruction period (2005-2009), and post rehabilitation and reconstruction period (2010-present). The statistical analysis of severity index and variance used to analyze the data. The three risk factors reviewed generally affected the cost in a medium impact. The high impact occurred in minor variables, which are `increase in material prices', `theft of materials', and `the fuel scarcity'. In overall, the three risk factors and the observed period contributed significant impact on construction costs.

The Science of Cost-Effective Materials Design - A Study in the Development of a High Strength, Impact Resistant Steel

Science.gov (United States)

Abrahams, Rachel

2017-06-01

Intermediate alloy steels are widely used in applications where both high strength and toughness are required for extreme/dynamic loading environments. Steels containing greater than 10% Ni-Co-Mo are amongst the highest strength martensitic steels, due to their high levels of solution strengthening, and preservation of toughness through nano-scaled secondary hardening, semi-coherent hcp-M2 C carbides. While these steels have high yield strengths (σy 0.2 % >1200 MPa) with high impact toughness values (CVN@-40 >30J), they are often cost-prohibitive due to the material and processing cost of nickel and cobalt. Early stage-I steels such as ES-1 (Eglin Steel) were developed in response to the high cost of nickel-cobalt steels and performed well in extreme shock environments due to the presence of analogous nano-scaled hcp-Fe2.4 C epsilon carbides. Unfortunately, the persistence of W-bearing carbides limited the use of ES-1 to relatively thin sections. In this study, we discuss the background and accelerated development cycle of AF96, an alternative Cr-Mo-Ni-Si stage-I temper steel using low-cost heuristic and Integrated Computational Materials Engineering (ICME)-assisted methods. The microstructure of AF96 was tailored to mimic that of ES-1, while reducing stability of detrimental phases and improving ease of processing in industrial environments. AF96 is amenable to casting and forging, deeply hardenable, and scalable to 100,000 kg melt quantities. When produced at the industrial scale, it was found that AF96 exhibits near-statistically identical mechanical properties to ES-1 at 50% of the cost.

Comparing climate and cost impacts of reference levels for reducing emissions from deforestation

Energy Technology Data Exchange (ETDEWEB)

Busch, Jonah [Center for Applied Biodiversity Science, Conservation International, 2011 Crystal Drive, Suite 500, Arlington, VA (United States); Strassburg, Bernardo [Center for Social and Economic Research on the Global Environment, University of East Anglia, Norwich NR4 7TJ (United Kingdom); Cattaneo, Andrea [Woods Hole Research Center, 149 Woods Hole Road, Falmouth, MA 02540-1644 (United States); Lubowski, Ruben [Environmental Defense Fund, 1875 Connecticut Avenue NW, Washington, DC (United States); Bruner, Aaron; Rice, Richard; Boltz, Frederick [Conservation International, 2011 Crystal Drive, Suite 500, Arlington, VA (United States); Creed, Anna; Ashton, Ralph, E-mail: jbusch@conservation.or [Terrestrial Carbon Group, 900 17th Street NW, Suite 700, Washington, DC (United States)

2009-10-15

The climate benefit and economic cost of an international mechanism for reducing emissions from deforestation and degradation (REDD) will depend on the design of reference levels for crediting emission reductions. We compare the impacts of six proposed reference level designs on emission reduction levels and on cost per emission reduction using a stylized partial equilibrium model (the open source impacts of REDD incentives spreadsheet; OSIRIS). The model explicitly incorporates national incentives to participate in an international REDD mechanism as well as international leakage of deforestation emissions. Our results show that a REDD mechanism can provide cost-efficient climate change mitigation benefits under a broad range of reference level designs. We find that the most effective reference level designs balance incentives to reduce historically high deforestation emissions with incentives to maintain historically low deforestation emissions. Estimates of emission reductions under REDD depend critically on the degree to which demand for tropical frontier agriculture generates leakage. This underscores the potential importance to REDD of complementary strategies to supply agricultural needs outside of the forest frontier.

Comparing climate and cost impacts of reference levels for reducing emissions from deforestation

International Nuclear Information System (INIS)

Busch, Jonah; Strassburg, Bernardo; Cattaneo, Andrea; Lubowski, Ruben; Bruner, Aaron; Rice, Richard; Boltz, Frederick; Creed, Anna; Ashton, Ralph

2009-01-01

The climate benefit and economic cost of an international mechanism for reducing emissions from deforestation and degradation (REDD) will depend on the design of reference levels for crediting emission reductions. We compare the impacts of six proposed reference level designs on emission reduction levels and on cost per emission reduction using a stylized partial equilibrium model (the open source impacts of REDD incentives spreadsheet; OSIRIS). The model explicitly incorporates national incentives to participate in an international REDD mechanism as well as international leakage of deforestation emissions. Our results show that a REDD mechanism can provide cost-efficient climate change mitigation benefits under a broad range of reference level designs. We find that the most effective reference level designs balance incentives to reduce historically high deforestation emissions with incentives to maintain historically low deforestation emissions. Estimates of emission reductions under REDD depend critically on the degree to which demand for tropical frontier agriculture generates leakage. This underscores the potential importance to REDD of complementary strategies to supply agricultural needs outside of the forest frontier.

Using preventive home monitoring to reduce hospital admission rates and reduce costs

DEFF Research Database (Denmark)

Dinesen, Birthe Irene; Haesum, Lisa K E; Soerensen, Natascha

2012-01-01

We studied whether preventive home monitoring of patients with chronic obstructive pulmonary disease (COPD) could reduce the frequency of hospital admissions and lower the cost of hospitalization. Patients were recruited from a health centre, general practitioner (GP) or the pulmonary hospital ward....... They were randomized to usual care or tele-rehabilitation with a telehealth monitoring device installed in their home for four months. A total of 111 patients were suitable for inclusion and consented to be randomized: 60 patients were allocated to intervention and three were lost to follow...... of admissions was €3461 per patient in the intervention group and €4576 in the control group; this difference was not significant. The Kaplan-Meier estimates for time to hospital admission were longer for the intervention group than the controls, but the difference was not significant. Future work requires...

Laser-based microstructuring of materials surfaces using low-cost microlens arrays

Science.gov (United States)

Nieto, Daniel; Vara, G.; Diez, J. A.; O`Connor, Gerard M.; Arines, Justo; Gómez-Reino, C.; Flores-Arias, M.

2012-03-01

Since frictional interactions in microscopically small components are becoming increasingly important for the development of new products for all modern technology, we present a laser-based technique for micro-patterning surfaces of materials using low-cost microlens arrays. The microlens used were fabricated on soda-lime glass using a laser direct-write technique, followed by a thermal treatment into an oven. By combining laser direct-write and the thermal treatment it was possible to obtain high quality elements using a low cost infrared laser widely implemented in industry which makes this technique attractive in comparison with other more expensive methods. The main advantage of using microlens arrays for micropatterning surfaces is the possibility of fabricating a large number of identical structures simultaneously, leading to a highly efficient process. In order to study the capabilities of the microlens fabricated for microstructuring materials, identical structures and arrays of holes were fabricated over a variety of materials, such us, stainless steel, polymer and ceramic. The minimum diameter of the individual microstructure generated at surface is 5 μm. Different nanosecond lasers operating at Infrared, Green and UV were used. The topography and morphology of the elements obtained were determined using a confocal microscope SENSOFAR 2300 Plμ.

The Cost Analysis of Corrosion Protection Solutions for Steel Components in Terms of the Object Life Cycle Cost

Directory of Open Access Journals (Sweden)

Kowalski Dariusz

2017-09-01

Full Text Available Steel materials, due to their numerous advantages - high availability, easiness of processing and possibility of almost any shaping are commonly applied in construction for carrying out basic carrier systems and auxiliary structures. However, the major disadvantage of this material is its high corrosion susceptibility, which depends strictly on the local conditions of the facility and the applied type of corrosion protection system. The paper presents an analysis of life cycle costs of structures installed on bridges used in the road lane conditions. Three anti-corrosion protection systems were considered, analyzing their essential cost components. The possibility of reducing significantly the costs associated with anti-corrosion protection at the stage of steel barriers maintenance over a period of 30 years has been indicated. The possibility of using a new approach based on the life cycle cost estimation in the anti-corrosion protection of steel elements is presented. The relationship between the method of steel barrier protection, the scope of repair, renewal work and costs is shown. The article proposes an optimal solution which, while reducing the cost of maintenance of road infrastructure components in the area of corrosion protection, allows to maintain certain safety standards for steel barriers that are installed on the bridge.

The Cost Analysis of Corrosion Protection Solutions for Steel Components in Terms of the Object Life Cycle Cost

Science.gov (United States)

Kowalski, Dariusz; Grzyl, Beata; Kristowski, Adam

2017-09-01

Steel materials, due to their numerous advantages - high availability, easiness of processing and possibility of almost any shaping are commonly applied in construction for carrying out basic carrier systems and auxiliary structures. However, the major disadvantage of this material is its high corrosion susceptibility, which depends strictly on the local conditions of the facility and the applied type of corrosion protection system. The paper presents an analysis of life cycle costs of structures installed on bridges used in the road lane conditions. Three anti-corrosion protection systems were considered, analyzing their essential cost components. The possibility of reducing significantly the costs associated with anti-corrosion protection at the stage of steel barriers maintenance over a period of 30 years has been indicated. The possibility of using a new approach based on the life cycle cost estimation in the anti-corrosion protection of steel elements is presented. The relationship between the method of steel barrier protection, the scope of repair, renewal work and costs is shown. The article proposes an optimal solution which, while reducing the cost of maintenance of road infrastructure components in the area of corrosion protection, allows to maintain certain safety standards for steel barriers that are installed on the bridge.

Reducing Development and Operations Costs using NASA's "GMSEC" Systems Architecture

Science.gov (United States)

Smith, Dan; Bristow, John; Crouse, Patrick

2007-01-01

This viewgraph presentation reviews the role of Goddard Mission Services Evolution Center (GMSEC) in reducing development and operation costs in handling the massive data from NASA missions. The goals of GMSEC systems architecture development are to (1) Simplify integration and development, (2)Facilitate technology infusion over time, (3) Support evolving operational concepts, and (4) All for mix of heritage, COTS and new components. First 3 missions (i.e., Tropical Rainforest Measuring Mission (TRMM), Small Explorer (SMEX) missions - SWAS, TRACE, SAMPEX, and ST5 3-Satellite Constellation System) each selected a different telemetry and command system. These results show that GMSEC's message-bus component-based framework architecture is well proven and provides significant benefits over traditional flight and ground data system designs. The missions benefit through increased set of product options, enhanced automation, lower cost and new mission-enabling operations concept options .

Competitive investments in cost reducing process improvement : The role of managerial incentives and spillover learning

NARCIS (Netherlands)

Veldman, Jasper; Gaalman, Gerard J.c.

2015-01-01

We study the rivalry between two firms and consider the effect of spillovers when the firms' operations and technology managers are given bonuses for cost reduction. We model a game in which the firm owners independently offer their manager a bonus to stimulate cost reducing process improvement

Potential cost-effectiveness of schistosomiasis treatment for reducing HIV transmission in Africa--the case of Zimbabwean women.

Directory of Open Access Journals (Sweden)

Martial L Ndeffo Mbah

Full Text Available Epidemiological data from Zimbabwe suggests that genital infection with Schistosoma haematobium may increase the risk of HIV infection in young women. Therefore, the treatment of Schistosoma haematobium with praziquantel could be a potential strategy for reducing HIV infection. Here we assess the potential cost-effectiveness of praziquantel as a novel intervention strategy against HIV infection.We developed a mathematical model of female genital schistosomiasis (FGS and HIV infections in Zimbabwe that we fitted to cross-sectional data of FGS and HIV prevalence of 1999. We validated our epidemic projections using antenatal clinic data on HIV prevalence. We simulated annual praziquantel administration to school-age children. We then used these model predictions to perform a cost-effectiveness analysis of annual administration of praziquantel as a potential measure to reduce the burden of HIV in sub-Saharan Africa.We showed that for a variation of efficacy between 30-70% of mass praziquantel administration for reducing the enhanced risk of HIV transmission per sexual act due to FGS, annual administration of praziquantel to school-age children in Zimbabwe could result in net savings of US$16-101 million compared with no mass treatment of schistosomiasis over a ten-year period. For a variation in efficacy between 30-70% of mass praziquantel administration for reducing the acquisition of FGS, annual administration of praziquantel to school-age children could result in net savings of US$36-92 million over a ten-year period.In addition to reducing schistosomiasis burden, mass praziquantel administration may be a highly cost-effective way of reducing HIV infections in sub-Saharan Africa. Program costs per case of HIV averted are similar to, and under some conditions much better than, other interventions that are currently implemented in Africa to reduce HIV transmission. As a cost-saving strategy, mass praziquantel administration should be prioritized

Improving the delivery of care and reducing healthcare costs with the digitization of information.

Science.gov (United States)

Noffsinger, R; Chin, S

2000-01-01

In the coming years, the digitization of information and the Internet will be extremely powerful in reducing healthcare costs while assisting providers in the delivery of care. One example of healthcare inefficiency that can be managed through information digitization is the process of prescription writing. Due to the handwritten and verbal communication surrounding prescription writing, as well as the multiple tiers of authorizations, the prescription drug process causes extensive financial waste as well as medical errors, lost time, and even fatal accidents. Electronic prescription management systems are being designed to address these inefficiencies. By utilizing new electronic prescription systems, physicians not only prescribe more accurately, but also improve formulary compliance thereby reducing pharmacy utilization. These systems expand patient care by presenting proactive alternatives at the point of prescription while reducing costs and providing additional benefits for consumers and healthcare providers.

Assessment of some straw-derived materials for reducing the leaching potential of Metribuzin residues in the soil

Energy Technology Data Exchange (ETDEWEB)

Cara, Irina Gabriela, E-mail: coroirina@yahoo.com [“Ion Ionescu de la Brad” University of Agricultural Sciences and Veterinary Medicine, Faculty of Agriculture, 3M. Sadoveanu Alley, 700490 Iasi (Romania); Trincă, Lucia Carmen, E-mail: lctrinca@uaiasi.ro [“Ion Ionescu de la Brad” University of Agricultural Sciences and Veterinary Medicine, Faculty of Horticulture, 3 M. Sadoveanu Alley, 700490 Iasi (Romania); Trofin, Alina Elena, E-mail: aetrofin@yahoo.com [“Ion Ionescu de la Brad” University of Agricultural Sciences and Veterinary Medicine, Faculty of Horticulture, 3 M. Sadoveanu Alley, 700490 Iasi (Romania); Cazacu, Ana, E-mail: anagarlea@gmail.com [“Ion Ionescu de la Brad” University of Agricultural Sciences and Veterinary Medicine, Faculty of Horticulture, 3 M. Sadoveanu Alley, 700490 Iasi (Romania); Ţopa, Denis, E-mail: topadennis@yahoo.com [“Ion Ionescu de la Brad” University of Agricultural Sciences and Veterinary Medicine, Faculty of Agriculture, 3M. Sadoveanu Alley, 700490 Iasi (Romania); Peptu, Cătălina Anişoara, E-mail: catipeptu@yahoo.co.uk [“Gheorghe Asachi” Technical University of Iasi, Faculty of Chemical Engineering and Environmental Protection, 73 D. Mangeron Street, 700050 Iasi (Romania); Jităreanu, Gerard, E-mail: gerardj@uaiasi.ro [“Ion Ionescu de la Brad” University of Agricultural Sciences and Veterinary Medicine, Faculty of Agriculture, 3M. Sadoveanu Alley, 700490 Iasi (Romania)

2015-12-15

Highlights: • Surface characteristics of activated straw (wheat, corn, soybean) were assessed. • Modification methods to enhance materials sorption were presented. • Adsorption mechanism of metribuzin was revealed and discussed. - Abstract: Biomass (straw waste) can be used as raw to obtain materials for herbicide removal from wastewater. These by-products have some important advantages, being environmentally friendly, easily available, presenting low costs, and requiring little processing to increase their adsorptive capacity. In the present study, some materials derived from agricultural waste (wheat, corn and soybean straw) were investigated as potential adsorbents for metribuzin removal from aqueous solutions. The straw wastes were processed by grinding, mineralisation (850 °C) and KOH activation in order to improve their functional surface activity. The materials surface characteristics were investigated by scanning electron microscopy, energy dispersive X-ray spectroscopy and atomic force microscopy. The adsorbents capacity was evaluated using batch sorption tests and liquid chromatography coupled with mass spectrometry for herbicide determination. For adsorption isotherms, the equilibrium time considered was 3 h. The experimental adsorption data were modelled by Freundlich and Langmuir models. The activated straw and ash-derived materials from wheat, corn and soybean increased the adsorption capacity of metribuzin with an asymmetrical behaviour. Overall, our results sustain that activated ash-derived from straw and activated straw materials can be a valuable solution for reducing the leaching potential of metribuzin through soil.

Assessment of some straw-derived materials for reducing the leaching potential of Metribuzin residues in the soil

International Nuclear Information System (INIS)

Cara, Irina Gabriela; Trincă, Lucia Carmen; Trofin, Alina Elena; Cazacu, Ana; Ţopa, Denis; Peptu, Cătălina Anişoara; Jităreanu, Gerard

2015-01-01

Highlights: • Surface characteristics of activated straw (wheat, corn, soybean) were assessed. • Modification methods to enhance materials sorption were presented. • Adsorption mechanism of metribuzin was revealed and discussed. - Abstract: Biomass (straw waste) can be used as raw to obtain materials for herbicide removal from wastewater. These by-products have some important advantages, being environmentally friendly, easily available, presenting low costs, and requiring little processing to increase their adsorptive capacity. In the present study, some materials derived from agricultural waste (wheat, corn and soybean straw) were investigated as potential adsorbents for metribuzin removal from aqueous solutions. The straw wastes were processed by grinding, mineralisation (850 °C) and KOH activation in order to improve their functional surface activity. The materials surface characteristics were investigated by scanning electron microscopy, energy dispersive X-ray spectroscopy and atomic force microscopy. The adsorbents capacity was evaluated using batch sorption tests and liquid chromatography coupled with mass spectrometry for herbicide determination. For adsorption isotherms, the equilibrium time considered was 3 h. The experimental adsorption data were modelled by Freundlich and Langmuir models. The activated straw and ash-derived materials from wheat, corn and soybean increased the adsorption capacity of metribuzin with an asymmetrical behaviour. Overall, our results sustain that activated ash-derived from straw and activated straw materials can be a valuable solution for reducing the leaching potential of metribuzin through soil.

78 FR 41857 - Simplified Cost Accounting and Other Actions To Reduce Paperwork in the Summer Food Service...

Science.gov (United States)

2013-07-12

... CFR Parts 210 and 225 RIN 0584-AD84 Simplified Cost Accounting and Other Actions To Reduce Paperwork... Consolidated Appropriations Act, 2008. The changes extend simplified cost accounting and reporting procedures... nondiscretionary simplified cost accounting and reporting procedures established in the Consolidated Appropriations...

What Strategies Do Physicians and Patients Discuss to Reduce Out-of-Pocket Costs? Analysis of Cost-Saving Strategies in 1,755 Outpatient Clinic Visits.

Science.gov (United States)

Hunter, Wynn G; Zhang, Cecilia Z; Hesson, Ashley; Davis, J Kelly; Kirby, Christine; Williamson, Lillie D; Barnett, Jamison A; Ubel, Peter A

2016-10-01

More than 1 in 4 Americans report difficulty paying medical bills. Cost-reducing strategies discussed during outpatient physician visits remain poorly characterized. We sought to determine how often patients and physicians discuss health care costs during outpatient visits and what strategies, if any, they discussed to lower patient out-of-pocket costs. Retrospective analysis of dialogue from 1,755 outpatient visits in community-based practices nationwide from 2010 to 2014. The study population included 677 patients with breast cancer, 422 with depression, and 656 with rheumatoid arthritis visiting 56 oncologists, 36 psychiatrists, and 26 rheumatologists, respectively. Thirty percent of visits contained cost conversations (95% confidence interval [CI], 28 to 32). Forty-four percent of cost conversations involved discussion of cost-saving strategies (95% CI, 40 to 48; median duration, 68 s). We identified 4 strategies to lower costs without changing the care plan. They were, in order of overall frequency: 1) changing logistics of care, 2) facilitating co-pay assistance, 3) providing free samples, and 4) changing/adding insurance plans. We also identified 4 strategies to reduce costs by changing the care plan: 1) switching to lower-cost alternative therapy/diagnostic, 2) switching from brand name to generic, 3) changing dosage/frequency, and 4) stopping/withholding interventions. Strategies were relatively consistent across health conditions, except for switching to a lower-cost alternative (more common in breast oncology) and providing free samples (more common in depression). Focus on 3 conditions with potentially high out-of-pocket costs. Despite price opacity, physicians and patients discuss a variety of out-of-pocket cost reduction strategies during clinic visits. Almost half of cost discussions mention 1 or more cost-saving strategies, with more frequent mention of those not requiring care-plan changes. © The Author(s) 2016.

Does SDDS Subscription Reduce Borrowing Costs for Emerging Market Economies?

OpenAIRE

John Cady

2005-01-01

Does macroeconomic data transparency-as signaled by subscription to the IMF's Special Data Dissemination Standard (SDDS)-help reduce borrowing costs in international capital markets? This question is examined using data on new issues of sovereign foreign-currency-denominated (U.S. dollar, yen, and euro) bonds for several emerging market economies. Panel econometric estimates indicate that spreads on new bond issues declined on average by close to 20 percent, or by an average of about 55 basis...

Influence of material choice on cost estimation of some key components of the Sulfur Iodine thermochemical process

International Nuclear Information System (INIS)

Gilardi, T.; Rodriguez, G.; Gomez, A.; Leybros, J.; Borgard, J.M.; Carles, P.; Anzieu, P.

2006-01-01

In the frame of the preliminary design of an sulfur/iodine thermochemical plant coupled with a 600 MWth Helium cooled High Temperature Reactor, CEA has pre-designed all the components of the I/S plant and has started to the cost estimation of all the key components with some industrial cost evaluation methods proposed by CHAUVEL or PETER and TIMMERHAUS. The purpose of the paper is to present the strong influence of material choice on final cost estimation of these key components by comparing price with standard material (steel) and the most appropriate material selected to support the strong corrosion involved by several chemical reactions of the I/S process. These results reinforce the fact that material selection must be done with the best accuracy and that it will be a key factor in the global economy of these plant investment. (authors)

Staged deployment of the International Fusion Materials Irradiation Facility

International Nuclear Information System (INIS)

Takeuchi, H.; Sugimoto, M.; Nakamura, H.

2001-01-01

The International Fusion Materials Irradiation Facility (IFMIF) employs an accelerator based D-Li intense neutron source as defined in the 1995-96 Conceptual Design Activity (CDA) study. In 1999, IEA mandated a review of the CDA IFMIF design for cost reduction without change to its original mission. This objective was accomplished by eliminating the previously assumed possibility of potential upgrade of IFMIF beyond the user requirements. The total estimated cost was reduced from $797.2 M to $487.8 M. An option of deployment in 3 stages was also examined to reduce the initial investment and annual expenditures during construction. In this scenario, full performance is achieved gradually with each interim stage as follows. 1st Stage: 20% operation for material selection for ITER breeding blanket, 2nd Stage: 50% operation to demonstrate materials performance of a reference alloy for DEMO, 3rd Stage: full performance operation ( 2MW/m 2 at 500cm 3 ) to obtain engineering data for potential DEMO materials under irradiation up to 100-200 dpa. In summary, the new, reduced cost IFMIF design and staged deployment still satisfies the original mission. The estimated cost of the 1st Stage facility is only $303.6 M making it financially much more attractive. Currently, IFMIF Key Element Technology Phase (KEP) is underway to reduce the key technology risk factors. (author)

Information system revives materials management

International Nuclear Information System (INIS)

Hansen, T.

1995-01-01

Through a change in philosophy and the development of a new, more efficient information management system, Arizona Public Service Co. (APSW) has, in less than two years, reduced material and service costs by 10 percent. The utility plans to cut these costs form 1993 figures by 25 percent before 2000. The utility is breaking new ground with ongoing implementation of new business processes and the new Materials Logistics Information System (MLIS), which has been co-developed with Texas Instruments Software Division (TISD)

A post-contract project analysis of material waste and cost overrun ...

African Journals Online (AJOL)

Material waste and cost overrun have been identified as common problems in the construction industry. These problems occur at both pre- and post-contract stages of a construction project. As a result of a dearth of empirical research and low level of awareness, the majority of managers of construction projects in Nigeria ...

Low technology tissue culture materials for initiation and ...

African Journals Online (AJOL)

Low technology tissue culture materials for initiation and multiplication of banana plants. ... African Crop Science Journal ... locally available macronutrients, micronutrients, sugar, equipment and facility reduced the cost of consumable material

DEMAND ILLUSION AS A WAY TO REDUCE COSTS

Directory of Open Access Journals (Sweden)

Kirill N. Sosnovskij

2014-01-01

Full Text Available Article devoted to a technique that reduces costs to retailers, as well as increase the speed of discounted products. This article deals with the laws of visual merchandising that have a significant impact on the implementation of the company’s products. The analysis of the first law, with the subsequent introduction into it of a new additional method. Consider the effect of «Illusion of deficit» arising from the application of the proposed method. The article also defines the basic hypothesis of the existence of methods and effect, and the conditions for their effective implementation. To confirm the effectiveness of the developed method, quantitative surveys are conducted for different age groups creating situational model, which allows respondents to feel as a consumer.

Costs of disposable material in the operating room do not show high correlation with surgical time: Implications for hospital payment.

Science.gov (United States)

Delo, Caroline; Leclercq, Pol; Martins, Dimitri; Pirson, Magali

2015-08-01

The objectives of this study are to analyze the variation of the surgical time and of disposable costs per surgical procedure and to analyze the association between disposable costs and the surgical time. The registration of data was done in an operating room of a 419 bed general hospital, over a period of three months (n = 1556 surgical procedures). Disposable material per procedure used was recorded through a barcode scanning method. The average cost (standard deviation) of disposable material is €183.66 (€183.44). The mean surgical time (standard deviation) is 96 min (63). Results have shown that the homogeneity of operating time and DM costs was quite good per surgical procedure. The correlation between the surgical time and DM costs is not high (r = 0.65). In a context of Diagnosis Related Group (DRG) based hospital payment, it is important that costs information systems are able to precisely calculate costs per case. Our results show that the correlation between surgical time and costs of disposable materials is not good. Therefore, empirical data or itemized lists should be used instead of surgical time as a cost driver for the allocation of costs of disposable materials to patients. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Cyclosporine/ketoconazole reduces treatment costs for nephrotic syndrome

Directory of Open Access Journals (Sweden)

A Iyengar

2013-01-01

Full Text Available Cyclosporine A (CyA is an effective agent for the treatment of glucocorticoid-dependent idiopathic nephrotic syndrome (GCDNS, but costs are prohibitive in resource-poor societies. The objectives of this study were to evaluate the efficacy and safety of reducing the dose of CyA by co-administering ketoconazole. A prospective study targeting children 2-18 years of age with GCDNS in remission with CyA monotherapy was conducted. CyA dose was reduced by 50% and ketoconazole was added at 25% of the recommended therapeutic dose, and the drug levels and therapeutic and adverse effects (AE were monitored. Continued combined therapy after completion of the 4-week trial period was offered. Ten patients (median age 9.5 years, range 3.0-16.0 years were enrolled in the study. At week 4, the CyA dose was 2.2 ± 0.7 mg/kg/day compared with 5.6 ± 0.9 mg/kg/day at enrolment ( P 50% without increased adverse events or drug monitoring needs. This intervention demonstrates how access of patients with limited resources to needed drugs can be improved by interference with physiological drug elimination.

Reduced material model for closed cell metal foam infiltrated with phase change material based on high resolution numerical studies

International Nuclear Information System (INIS)

Ohsenbrügge, Christoph; Marth, Wieland; Navarro y de Sosa, Iñaki; Drossel, Welf-Guntram; Voigt, Axel

2016-01-01

Highlights: • Closed cell metal foam sandwich structures were investigated. • High resolution numerical studies were conducted using CT scan data. • A reduced model for use in commercial FE software reduces needed degrees of freedom. • Thermal inertia is increased about 4 to 5 times in PCM filled structures. • The reduced material model was verified using experimental data. - Abstract: The thermal behaviour of closed cell metal foam infiltrated with paraffin wax as latent heat storage for application in high precision tool machines was examined. Aluminium foam sandwiches with metallically bound cover layers were prepared in a powder metallurgical process and cross-sectional images of the structures were generated with X-ray computed tomography. Based on the image data a three dimensional highly detailed model was derived and prepared for simulation with the adaptive FE-library AMDiS. The pores were assumed to be filled with paraffin wax. The thermal conductivity and the transient thermal behaviour in the phase-change region were investigated. Based on the results from the highly detailed simulations a reduced model for use in commercial FE-software (ANSYS) was derived. It incorporates the properties of the matrix and the phase change material into a homogenized material. A sandwich-structure with and without paraffin was investigated experimentally under constant thermal load. The results were used to verify the reduced material model in ANSYS.

Installation, Operation, and Maintenance Strategies to Reduce the Cost of Offshore Wind Energy

Energy Technology Data Exchange (ETDEWEB)

Maples, B. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Saur, G. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hand, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); van de Pietermen, R. [Energy Research Center of the Netherlands (Netherlands); Obdam, T. [Energy Research Center of the Netherlands (Netherlands)

2013-07-01

Currently, installation, operation, and maintenance (IO&M) costs contribute approximately 30% to the LCOE of offshore wind plants. To reduce LCOE while ensuring safety, this paper identifies principal cost drivers associated with IO&M and quantifies their impacts on LCOE. The paper identifies technology improvement opportunities and provides a basis for evaluating innovative engineering and scientific concepts developed subsequently to the study. Through the completion of a case study, an optimum IO&M strategy for a hypothetical offshore wind project is identified.

Cost Analysis of Physician Assistant Home Visit Program to Reduce Readmissions After Cardiac Surgery.

Science.gov (United States)

Nabagiez, John P; Shariff, Masood A; Molloy, William J; Demissie, Seleshi; McGinn, Joseph T

2016-09-01

A physician assistant home care (PAHC) program providing house calls was initiated to reduce hospital readmissions after adult cardiac surgery. The purpose of our study was to compare 30-day PAHC and pre-PAHC readmission rate, length of stay, and cost. Patients who underwent adult cardiac surgery in the 48 months from September 2008 through August 2012 were retrospectively reviewed using pre-PAHC patients as the control group. Readmission rate, length of stay, and health care cost, as measured by hospital billing, were compared between groups matched with propensity score. Of the 1,185 patients who were discharged directly home, 155 (13%) were readmitted. Total readmissions for the control group (n = 648) was 101 patients (16%) compared with the PAHC group (n = 537) total readmissions of 54 (10%), a 38% reduction in the rate of readmission (p = 0.0049). Propensity score matched groups showed a rate reduction of 41% with 17% (62 of 363) for the control compared with 10% (37 of 363) for the PAHC group (p = 0.0061). The average hospital bill per readmission was $39,100 for the control group and $56,600 for the PAHC group (p = 0.0547). The cost of providing home visits was $25,300 for 363 propensity score matched patients. The PAHC program reduced the 30-day readmission rate by 41% for propensity score matched patients. Analysis demonstrated a savings of $977,500 at a cost of $25,300 over 2 years, or $39 in health care saved, in terms of hospital billing, for every $1 spent. Therefore, a home visit by a cardiac surgical physician assistant is a cost-effective strategy to reduce readmissions after cardiac surgery. Copyright © 2016 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Integrating 3D Flower-Like Hierarchical Cu2NiSnS4 with Reduced Graphene Oxide as Advanced Anode Materials for Na-Ion Batteries.

Science.gov (United States)

Yuan, Shuang; Wang, Sai; Li, Lin; Zhu, Yun-hai; Zhang, Xin-bo; Yan, Jun-min

2016-04-13

Development of an anode material with high performance and low cost is crucial for implementation of next-generation Na-ion batteries (NIBs) electrode, which is proposed to meet the challenges of large scale renewable energy storage. Metal chalcogenides are considered as promising anode materials for NIBs due to their high theoretical capacity, low cost, and abundant sources. Unfortunately, their practical application in NIBs is still hindered because of low conductivity and morphological collapse caused by their volume expansion and shrinkage during Na(+) intercalation/deintercalation. To solve the daunting challenges, herein, we fabricated novel three-dimensional (3D) Cu2NiSnS4 nanoflowers (CNTSNs) as a proof-of-concept experiment using a facile and low-cost method. Furthermore, homogeneous integration with reduced graphene oxide nanosheets (RGNs) endows intrinsically insulated CNTSNs with superior electrochemical performances, including high specific capacity (up to 837 mAh g(-1)), good rate capability, and long cycling stability, which could be attributed to the unique 3D hierarchical structure providing fast ion diffusion pathway and high contact area at the electrode/electrolyte interface.

Cost of reproduction in a long-lived bird: incubation effort reduces immune function and future reproduction

OpenAIRE

Hanssen, S A; Hasselquist, Dennis; Folstad, I; Erikstad, K E

2005-01-01

Life-history theory predicts that increased current reproductive effort should lead to a fitness cost. This cost of reproduction may be observed as reduced survival or future reproduction, and may be caused by temporal suppression of immune function in stressed or hard-working individuals. In birds, consideration of the costs of incubating eggs has largely been neglected in favour of the costs of brood rearing. We manipulated incubation demand in two breeding seasons (2000 and 2001) in female...

Graphene as a protein crystal mounting material to reduce background scatter.

Science.gov (United States)

Wierman, Jennifer L; Alden, Jonathan S; Kim, Chae Un; McEuen, Paul L; Gruner, Sol M

2013-10-01

The overall signal-to-noise ratio per unit dose for X-ray diffraction data from protein crystals can be improved by reducing the mass and density of all material surrounding the crystals. This article demonstrates a path towards the practical ultimate in background reduction by use of atomically thin graphene sheets as a crystal mounting platform for protein crystals. The results show the potential for graphene in protein crystallography and other cases where X-ray scatter from the mounting material must be reduced and specimen dehydration prevented, such as in coherent X-ray diffraction imaging of microscopic objects.

Cost-effectiveness of universal rotavirus vaccination in reducing rotavirus gastroenteritis in Ireland.

LENUS (Irish Health Repository)

Tilson, L

2011-10-06

We evaluated the cost-effectiveness of universal infant rotavirus (RV) vaccination compared to current standard of care of "no vaccination". Two RV vaccines are currently licensed in Ireland: Rotarix and RotaTeq. A cohort model used in several European countries was adapted using Irish epidemiological, resource utilisation and cost data. The base case model considers the impact of Rotarix vaccination on health-related quality of life of children under five years old from a healthcare payer perspective. Other scenarios explored the use of RotaTeq, impact on one caregiver, on societal costs and on cases that do not seek medical attention. Cost was varied between the vaccine list price (€100\\/course) in the base case and an assumed tender price (€70\\/course). One-way and probabilistic sensitivity analyses were conducted. Implementing universal RV vaccination may prevent around 1970 GP visits, 3280 A&E attendances and 2490 hospitalisations. A vaccination programme was estimated to cost approximately €6.54 million per year but €4.65 million of this would be offset by reducing healthcare resource use. The baseline ICER was €112,048\\/QALY and €72,736\\/QALY from the healthcare payer and societal perspective, respectively, falling to €68,896 and €43,916\\/QALY, respectively, if the impact on one caregiver was considered. If the price fell to €70 per course, universal RV vaccination would be cost saving under all scenarios. Results were sensitive to vaccination costs, incidence of RV infection and direct medical costs. Universal RV vaccination would not be cost-effective under base case assumptions. However, it could be cost-effective at a lower vaccine price or from a wider societal perspective.

Innovation in product design as a factor for reducing logistic and production costs

Directory of Open Access Journals (Sweden)

Luciana Fighera Marzall

2016-03-01

Full Text Available Innovation has been considered of fundamental importance for organizations competing in dynamic environments, which along with cost management has been shown as an organizational strategy that allows the company to measure its results and implement measures that impact on the organization's performance as a whole. This paper, carried out in a metal mechanical industry of a telecommunications engineering branch, aims to analyse cost reduction in logistics raw materials areas through innovation in the product design, which are antennas and towers for telephone networks. In terms of methodology, this study presents itself as a qualitative and quantitative research-action, which from the link between theory and practice allows for intervention in the middle of the researchers studied. As a result, an innovative project was developed, which allowed for the reduction costs of production by 68% and logistics by 32%. Despite the significant decrease in costs, the quality of manufactured products not declined and customer needs were met, thus making the company more competitive against competitors. Not widespread in the literature, this analysis of the impact on logistics and production costs due to improvements in the project is the main contribution theoretical of this paper.

Low-cost far infrared bolometer camera for automotive use

Science.gov (United States)

Vieider, Christian; Wissmar, Stanley; Ericsson, Per; Halldin, Urban; Niklaus, Frank; Stemme, Göran; Källhammer, Jan-Erik; Pettersson, Håkan; Eriksson, Dick; Jakobsen, Henrik; Kvisterøy, Terje; Franks, John; VanNylen, Jan; Vercammen, Hans; VanHulsel, Annick

2007-04-01

A new low-cost long-wavelength infrared bolometer camera system is under development. It is designed for use with an automatic vision algorithm system as a sensor to detect vulnerable road users in traffic. Looking 15 m in front of the vehicle it can in case of an unavoidable impact activate a brake assist system or other deployable protection system. To achieve our cost target below €100 for the sensor system we evaluate the required performance and can reduce the sensitivity to 150 mK and pixel resolution to 80 x 30. We address all the main cost drivers as sensor size and production yield along with vacuum packaging, optical components and large volume manufacturing technologies. The detector array is based on a new type of high performance thermistor material. Very thin Si/SiGe single crystal multi-layers are grown epitaxially. Due to the resulting valence barriers a high temperature coefficient of resistance is achieved (3.3%/K). Simultaneously, the high quality crystalline material provides very low 1/f-noise characteristics and uniform material properties. The thermistor material is transferred from the original substrate wafer to the read-out circuit using adhesive wafer bonding and subsequent thinning. Bolometer arrays can then be fabricated using industry standard MEMS process and materials. The inherently good detector performance allows us to reduce the vacuum requirement and we can implement wafer level vacuum packaging technology used in established automotive sensor fabrication. The optical design is reduced to a single lens camera. We develop a low cost molding process using a novel chalcogenide glass (GASIR®3) and integrate anti-reflective and anti-erosion properties using diamond like carbon coating.

The impact of reducing intensive care unit length of stay on hospital costs: evidence from a tertiary care hospital in Canada.

Science.gov (United States)

Evans, Jessica; Kobewka, Daniel; Thavorn, Kednapa; D'Egidio, Gianni; Rosenberg, Erin; Kyeremanteng, Kwadwo

2018-02-23

To use theoretical modelling exercises to determine the effect of reduced intensive care unit (ICU) length of stay (LOS) on total hospital costs at a Canadian centre. We conducted a retrospective cost analysis from the perspective of one tertiary teaching hospital in Canada. Cost, demographic, clinical, and LOS data were retrieved through case-costing, patient registry, and hospital abstract systems of The Ottawa Hospital Data Warehouse for all new in-patient ward (30,483) and ICU (2,239) encounters between April 2012 and March 2013. Aggregate mean daily variable direct (VD) costs for ICU vs ward encounters were summarized by admission day number, LOS, and cost centre. The mean daily VD cost per ICU patient was $2,472 (CAD), accounting for 67.0% of total daily ICU costs per patient and $717 for patients admitted to the ward. Variable direct cost is greatest on the first day of ICU admission ($3,708), and then decreases by 39.8% to plateau by the fifth day of admission. Reducing LOS among patients with ICU stays ≥ four days could potentially result in an annual hospital cost saving of $852,146 which represents 0.3% of total in-patient hospital costs and 1.2% of ICU costs. Reducing ICU LOS has limited cost-saving potential given that ICU costs are greatest early in the course of admission, and this study does not support the notion of reducing ICU LOS as a sole cost-saving strategy.

A conceptual framework for the evaluation of cost-effectiveness of projects to reduce GHG emissions and sequester carbon

International Nuclear Information System (INIS)

Sathaye, J.; Norgaard, R.; Makundi, W.

1993-07-01

This paper proposes a conceptual framework for evaluating the cost of projects to reduce atmospheric greenhouse gases (GHGs). The evaluation of cost-effectiveness should account for both the timing of carbon emissions and the damage caused by the atmospheric stock of carbon. We develop a conceptual basis to estimate the cost-effectiveness of projects in terms of the cost of reducing atmospheric carbon (CRAC) and other GHGs. CRAC accounts for the economic discount rate, alternative functional forms of the shadow price, the residence period of carbon in the atmosphere, and the multiple monetary benefits of projects. The last item is of particular importance to the developing countries

Determining the minimum mass and cost of a magnetic refrigerator

DEFF Research Database (Denmark)

Bjørk, Rasmus; Smith, Anders; Bahl, Christian Robert Haffenden

2011-01-01

An expression is determined for the mass of the magnet and magnetocaloric material needed for a magnetic refrigerator and these are determined using numerical modeling for both parallel plate and packed sphere bed regenerators as function of temperature span and cooling power. As magnetocaloric......, respectively, the cheapest 100 W parallel plate refrigerator with a temperature span of 20 K using Gd and a Halbach magnet has 0.8 kg of magnet, 0.3 kg of Gd and a cost of $35. Using the constant material reduces this cost to $25. A packed sphere bed refrigerator with the constant material costs $7. It is also...

Cost-effectiveness Analysis of Sacubitril/Valsartan vs Enalapril in Patients With Heart Failure and Reduced Ejection Fraction.

Science.gov (United States)

Gaziano, Thomas A; Fonarow, Gregg C; Claggett, Brian; Chan, Wing W; Deschaseaux-Voinet, Celine; Turner, Stuart J; Rouleau, Jean L; Zile, Michael R; McMurray, John J V; Solomon, Scott D

2016-09-01

The angiotensin receptor neprilysin inhibitor sacubitril/valsartan was associated with a reduction in cardiovascular mortality, all-cause mortality, and hospitalizations compared with enalapril. Sacubitril/valsartan has been approved for use in heart failure (HF) with reduced ejection fraction in the United States and cost has been suggested as 1 factor that will influence the use of this agent. To estimate the cost-effectiveness of sacubitril/valsartan vs enalapril in the United States. Data from US adults (mean [SD] age, 63.8 [11.5] years) with HF with reduced ejection fraction and characteristics similar to those in the PARADIGM-HF trial were used as inputs for a 2-state Markov model simulated HF. Risks of all-cause mortality and hospitalization from HF or other reasons were estimated with a 30-year time horizon. Quality of life was based on trial EQ-5D scores. Hospital costs combined Medicare and private insurance reimbursement rates; medication costs included the wholesale acquisition cost for sacubitril/valsartan and enalapril. A discount rate of 3% was used. Sensitivity analyses were performed on key inputs including: hospital costs, mortality benefit, hazard ratio for hospitalization reduction, drug costs, and quality-of-life estimates. Hospitalizations, quality-adjusted life-years (QALYs), costs, and incremental costs per QALY gained. The 2-state Markov model of US adult patients (mean age, 63.8 years) calculated that there would be 220 fewer hospital admissions per 1000 patients with HF treated with sacubitril/valsartan vs enalapril over 30 years. The incremental costs and QALYs gained with sacubitril/valsartan treatment were estimated at $35 512 and 0.78, respectively, compared with enalapril, equating to an incremental cost-effectiveness ratio (ICER) of $45 017 per QALY for the base-case. Sensitivity analyses demonstrated ICERs ranging from $35 357 to $75 301 per QALY. For eligible patients with HF with reduced ejection fraction, the Markov

Discrimination of Naturally Occurring Radioactive Material in Plastic Scintillator Material

International Nuclear Information System (INIS)

Ely, James H.; Kouzes, Richard T.; Geelhood, Bruce D.; Schweppe, John E.; Warner, Ray A.

2003-01-01

Plastic scintillator material is used in many applications for the detection of gamma-rays from radioactive material, primarily due to the sensitivity per unit cost compared to other detection materials. However, the resolution and lack of full-energy peaks in the plastic scintillator material prohibits detailed spectroscopy. Therefore, other materials such as doped sodium iodide are used for spectroscopic applications. The limited spectroscopic information can however be exploited in plastic scintillator materials to provide some discrimination. The discrimination between man-made and naturally occurring sources would be useful in reducing alarm screening for radiation detection applications which target man-made sources. The results of applying the limited energy information from plastic scintillator material for radiation portal monitors are discussed.

Priorities for technology development and policy to reduce the risk from radioactive materials

International Nuclear Information System (INIS)

Duggan, Ruth Ann

2010-01-01

The Standing Committee on International Security of Radioactive and Nuclear Materials in the Nonproliferation and Arms Control Division conducted its fourth annual workshop in February 2010 on Reducing the Risk from Radioactive and Nuclear Materials. This workshop examined new technologies in real-time tracking of radioactive materials, new risks and policy issues in transportation security, the best practices and challenges found in addressing illicit radioactive materials trafficking, industry leadership in reducing proliferation risk, and verification of the Nuclear Nonproliferation Treaty, Article VI. Technology gaps, policy gaps, and prioritization for addressing the identified gaps were discussed. Participants included academia, policy makers, radioactive materials users, physical security and safeguards specialists, and vendors of radioactive sources and transportation services. This paper summarizes the results of this workshop with the recommendations and calls to action for the Institute of Nuclear Materials Management (INMM) membership community.

Facility Management as a Way of Reducing Costs in Transport Companies

Science.gov (United States)

Matusova, Dominika; Gogolova, Martina

2017-10-01

For facility management exists a several interpretations. These interpretations emerged progressively. At the time of the notion of facility management was designed to manage an administrative building, in the United States (US). They can ensure their operation and maintenance. From the US, this trend is further moved to Europe and now it start becoming a current and actual topic also in Slovakia. Facility management is contractually agreed scheme of services, semantically recalls traditional building management. There by finally pushed for activities related to real estates. For facility management is fundamental - certification and certification systems. Therefore, is essential to know, the cost structure of certification. The most commonly occurring austerity measures include: heat pumps, use of renewable energy, solar panels and water savings. These measures can reduce the cost.

Lean Six Sigma to Reduce Intensive Care Unit Length of Stay and Costs in Prolonged Mechanical Ventilation.

Science.gov (United States)

Trzeciak, Stephen; Mercincavage, Michael; Angelini, Cory; Cogliano, William; Damuth, Emily; Roberts, Brian W; Zanotti, Sergio; Mazzarelli, Anthony J

Patients with prolonged mechanical ventilation (PMV) represent important "outliers" of hospital length of stay (LOS) and costs (∼$26 billion annually in the United States). We tested the hypothesis that a Lean Six Sigma (LSS) approach for process improvement could reduce hospital LOS and the associated costs of care for patients with PMV. Before-and-after cohort study. Multidisciplinary intensive care unit (ICU) in an academic medical center. Adult patients admitted to the ICU and treated with PMV, as defined by diagnosis-related group (DRG). We implemented a clinical redesign intervention based on LSS principles. We identified eight distinct processes in preparing patients with PMV for post-acute care. Our clinical redesign included reengineering daily patient care rounds ("Lean ICU rounds") to reduce variation and waste in these processes. We compared hospital LOS and direct cost per case in patients with PMV before (2013) and after (2014) our LSS intervention. Among 259 patients with PMV (131 preintervention; 128 postintervention), median hospital LOS decreased by 24% during the intervention period (29 vs. 22 days, p < .001). Accordingly, median hospital direct cost per case decreased by 27% ($66,335 vs. $48,370, p < .001). We found that a LSS-based clinical redesign reduced hospital LOS and the costs of care for patients with PMV.

Radically Reducing the Costs of Panel Critical Reviews According to ISO 14040

DEFF Research Database (Denmark)

Weidema, Bo Pedersen; Christiansen, Kim; Wernet, Gregor

2013-01-01

We suggest a procedure that radically reduces the critical review costs without compromising their thoroughness and overall quality. This procedure has 3 elements: A fixed panel for all reviews, an already critically reviewed background database, and a software-supported review procedure. The pre....... The presentation discusses these elements in the light of the upcoming ISO 14071 on critical review....

Managing concrete bridges: Methods for reducing costs and user inconveniences

DEFF Research Database (Denmark)

Goltermann, Per

2005-01-01

The paper presents experiences from modern bridge maintenance management, which has been forced to develop new and cost-efficient approaches in order to cope with the increase in overall deterioration of the aging bridge stock, the growing requirements to accessibility and the decreasing budgets...... situations often postpone or reduce the repair and rehabilitation activities required in critical parts of the structure. The paper will present some cases, where these approaches have been used on existing concrete bridges and explain how these experiences can be applied on other types of structures...

Alternative strategies to reduce cost and waste volume in HEPA filtration using metallic filter media - 59348

International Nuclear Information System (INIS)

Chadwick, Chris

2012-01-01

Document available in abstract form only. Full text of publication follows: The disposal costs of contaminated HEPA and THE filter elements have been proved to be disproportionately high compared with the cost of the elements themselves. Work published elsewhere (Moore, et el 1992; Bergman et al 1997) suggests that the cost of use of traditional, panel type, glass fibre HEPA filtration trains to the DOE was, during that period, $29.5 million, based on a five year life cycle, and including installation, testing, removal and disposal life cycle costs being based on estimates dating from 1987-1990. Within that cost estimate, $300 was the value given to the filter and $4, 450 was given to the peripheral activity. Clearly, if the $4, 450 component could be reduced, tremendous saving could ensue, in addition to the reduction of the legacy burden of waste volume. This issue exists for operators in both the US and in Europe. If HEPA filters could be cleaned to a condition where they could either be re-used or decontaminated to the extent that they could be stored as a lower cost wasteform or if HEPA/THE filter elements were available without any organic content likely to give rise to flammable or explosive decomposition gases during long term storage this would also reduce the costs and monitoring necessary in storage. (author)

How to save costs by reducing unnecessary testing: Lean thinking in clinical practice

NARCIS (Netherlands)

Vegting, I.L.; van Beneden, M.; Kramer, M.H.H.; Thijs, A.; Kostense, P.J.; Nanayakkara, P.W.B.

2012-01-01

Background: The burden of health care expenditure on national budgets has increased dramatically over the past decade. A pilot study in our hospital demonstrated that many unnecessary diagnostic tests were performed routinely. The aim of this study was to reduce the costs of unnecessary diagnostic

Do Statins Reduce the Health and Health Care Costs of Obesity?

Science.gov (United States)

Gaudette, Étienne; Goldman, Dana P; Messali, Andrew; Sood, Neeraj

2015-07-01

Obesity impacts both individual health and, given its high prevalence, total health care spending. However, as medical technology evolves, health outcomes for a number of obesity-related illnesses improve. This article examines whether medical innovation can mitigate the adverse health and spending associated with obesity, using statins as a case study. Because of the relationship between obesity and hypercholesterolaemia, statins play an important role in the medical management of obese individuals and the prevention of costly obesity-related sequelae. Using well-recognized estimates of the health impact of statins and the Future Elderly Model (FEM)-an established dynamic microsimulation model of the health of Americans aged over 50 years-we estimate the changes in life expectancy, functional status and health care costs of obesity due to the introduction and widespread use of statins. Life expectancy gains of statins are estimated to be 5-6 % greater for obese individuals than for healthy-weight individuals, but most of these additional gains are associated with some level of disability. Considering both medical spending and the value of quality-adjusted life-years, statins do not significantly alter the costs of class 1 and 2 obesity (body mass index [BMI] ≥30 and ≥35 kg/m(2), respectively) and they increase the costs of class 3 obesity (BMI ≥40 kg/m(2)) by 1.2 %. Although statins are very effective medications for lowering the risk of obesity-associated illnesses, they do not significantly reduce the costs of obesity.

Transforming Wartime Contracting: Controlling Costs, Reducing Risks

Science.gov (United States)

2011-08-01

conceptual ambiguity lies nestled in the meaning ascribed to “inherent.” The language of the Instruction also serves as an illustration that...other factors to the composite rate to present a fuller accounting of the cost of military personnel. It adds costs for recruitment and advertising ...Defense Adds to above: Costs for recruitment and advertising , training, subsidized groceries (commissaries), education assistance, child-development

Capital Cost Optimization for Prefabrication: A Factor Analysis Evaluation Model

Directory of Open Access Journals (Sweden)

Hong Xue

2018-01-01

Full Text Available High capital cost is a significant hindrance to the promotion of prefabrication. In order to optimize cost management and reduce capital cost, this study aims to explore the latent factors and factor analysis evaluation model. Semi-structured interviews were conducted to explore potential variables and then questionnaire survey was employed to collect professionals’ views on their effects. After data collection, exploratory factor analysis was adopted to explore the latent factors. Seven latent factors were identified, including “Management Index”, “Construction Dissipation Index”, “Productivity Index”, “Design Efficiency Index”, “Transport Dissipation Index”, “Material increment Index” and “Depreciation amortization Index”. With these latent factors, a factor analysis evaluation model (FAEM, divided into factor analysis model (FAM and comprehensive evaluation model (CEM, was established. The FAM was used to explore the effect of observed variables on the high capital cost of prefabrication, while the CEM was used to evaluate comprehensive cost management level on prefabrication projects. Case studies were conducted to verify the models. The results revealed that collaborative management had a positive effect on capital cost of prefabrication. Material increment costs and labor costs had significant impacts on production cost. This study demonstrated the potential of on-site management and standardization design to reduce capital cost. Hence, collaborative management is necessary for cost management of prefabrication. Innovation and detailed design were needed to improve cost performance. The new form of precast component factories can be explored to reduce transportation cost. Meanwhile, targeted strategies can be adopted for different prefabrication projects. The findings optimized the capital cost and improved the cost performance through providing an evaluation and optimization model, which helps managers to

A cost-effective approach to the development of printed materials: a randomized controlled trial of three strategies.

Science.gov (United States)

Paul, C L; Redman, S; Sanson-Fisher, R W

2004-12-01

Printed materials have been a primary mode of communication in public health education. Three major approaches to the development of these materials--the application of characteristics identified in the literature, behavioral strategies and marketing strategies--have major implications for both the effectiveness and cost of materials. However, little attention has been directed towards the cost-effectiveness of such approaches. In the present study, three pamphlets were developed using successive addition of each approach: first literature characteristics only ('C' pamphlet), then behavioral strategies ('C + B' pamphlet) and then marketing strategies ('C + B + M' pamphlet). Each pamphlet encouraged women to join a Pap Test Reminder Service (PTRS). Each pamphlet was mailed to a randomly selected sample of 2700 women aged 50-69 years. Registrations with the PTRS were monitored and 420 women in each pamphlet group were surveyed by telephone. It was reported that the 'C + B' and 'C + B + M' pamphlets were significantly more effective than the 'C' pamphlet. The 'C + B' pamphlet was the most cost-effective of the three pamphlets. There were no significant differences between any of the pamphlet groups on acceptability, knowledge or attitudes. It was suggested that the inclusion of behavioral strategies is likely to be a cost-effective approach to the development of printed health education materials.

The role of technology in reducing health care costs. Phase II and phase III.

Energy Technology Data Exchange (ETDEWEB)

Cilke, John F.; Parks, Raymond C.; Funkhouser, Donald Ray; Tebo, Michael A.; Murphy, Martin D.; Hightower, Marion Michael; Gallagher, Linda K.; Craft, Richard Layne, II; Garcia, Rudy John

2004-04-01

In Phase I of this project, reported in SAND97-1922, Sandia National Laboratories applied a systems approach to identifying innovative biomedical technologies with the potential to reduce U.S. health care delivery costs while maintaining care quality. The effort provided roadmaps for the development and integration of technology to meet perceived care delivery requirements and an economic analysis model for development of care pathway costs for two conditions: coronary artery disease (CAD) and benign prostatic hypertrophy (BPH). Phases II and III of this project, which are presented in this report, were directed at detailing the parameters of telemedicine that influence care delivery costs and quality. These results were used to identify and field test the communication, interoperability, and security capabilities needed for cost-effective, secure, and reliable health care via telemedicine.

Cost-effectiveness of sacubitril/valsartan versus enalapril in patients with heart failure and reduced ejection fraction.

Science.gov (United States)

Liang, Lin; Bin-Chia Wu, David; Aziz, Mohamed Ismail Abdul; Wong, Raymond; Sim, David; Leong, Kui Toh Gerard; Wei, Yong Quek; Tan, Doreen; Ng, Kwong

2018-02-01

Sacubitril/valsartan reduces cardiovascular death and hospitalizations for heart failure (HF). However, decision-makers need to determine whether its benefits are worth the additional costs, given the low-cost generic status of traditional standard of care. To evaluate the cost-effectiveness of sacubitril/valsartan compared to enalapril in patients with HF and reduced ejection fraction, from the Singapore healthcare payer perspective. A Markov model was developed to project clinical and economic outcomes of sacubitril/valsartan vs enalapril for 66-year-old patients with HF over 10 years. Key health states included New York Heart Association classes I-IV and deaths; patients in each state incurred a monthly risk of hospitalization for HF and cardiovascular death. Sacubitril/valsartan benefits were modeled by applying the hazard ratios (HRs) in PARADIGM-HF trial to baseline probabilities. Primary model outcomes were total and incremental costs and quality-adjusted life years (QALYs) and the incremental cost-effectiveness ratio (ICER) for sacubitril/valsartan relative to enalapril Results: Compared to enalapril, sacubitril/valsartan was associated with an ICER of SGD 74,592 (USD 55,198) per QALY gained. A major driver of cost-effectiveness was the cardiovascular mortality benefit of sacubitril/valsartan. The uncertainty of this treatment benefit in the Asian sub-group was tested in sensitivity analyses using a HR of 1 as an upper limit, where the ICERs ranged from SGD 41,019 (USD 30,354) to SGD 1,447,103 (USD 1,070,856) per QALY gained. Probabilistic sensitivity analyses showed the probability of sacubitril/valsartan being cost-effective was below 1%, 12%, and 71% at SGD 20,000, SGD 50,000, and SGD 100,000 per QALY gained, respectively. At the current daily price sacubitril/valsartan may not represent good value for limited healthcare dollars compared to enalapril in reducing cardiovascular morbidity and mortality in HF in the Singapore healthcare setting. This study

A New Remote Communications Link to Reduce Residential PV Solar Costs

Energy Technology Data Exchange (ETDEWEB)

King, Randy [Operant Solar Corporation,CA (United States); Sugiyama, Rod [Operant Solar Corporation,CA (United States)

2017-12-11

Monitoring of PV/DER site production is expensive to install and unreliable. Among third party systems providers, lost communications links are a growing concern. Nearly 20% of links are failing, provisioning is complex, recovery is expensive, production data is lost, and access is fragmented. FleetLink is a new concept in DER system communications, purpose built for lowering the cost of maintaining active contact with residential end user sites and ensuring that production data is reliably available to third party systems providers. Systems providers require accurate, secure system monitoring and reporting of production data and system faults while driving down overall costs to compete effectively. This plug and play, independently operating communications solution lowers the cost of fleet contact from typically .08 dollars-$.12/W down to .02 dollars -.03/W including installation and maintenance expenses. FleetLink establishes a breakthrough in simplicity that facilitates rapid expansion of residential solar by reducing initial capital outlay and lowering installation labor time and skill levels. The solution also facilitates higher DER installation growth rates by driving down maintenance costs and eliminating communications trouble calls. This is accomplished by the FleetLink’s unique network technology that enables dynamic network configuration for fast changes, and active, self-healing DER site contact for uptime assurance. Using an open source network framework with proprietary, application specific enhancements, FleetLink independently manages connectivity, security, recovery, grid control communications, and fleet expansion while presenting a compliant SunSpec interface to the third party operations centers. The net system cost savings of at least .05 dollars/W supports the SunShot cost goals and the flexibility and scalability of the solution accelerates the velocity and ubiquitous adoption of solar.

An estimation of the effect of 100% Compliance with Diabetes Treatment: Can we reduce cost of illness with higher compliance rates?

Directory of Open Access Journals (Sweden)

Guvenc Kockaya

2011-01-01

Full Text Available Introduction: The current study was designed to estimate the direct cost of noncompliance of diabetes patients to the US health system. Understanding these expenses can inform screening and education budget policy regarding expenditure levels that can be calculated to be cost-beneficial. Materials and Method: The study was conducted in three parts. First, a computer search of National Institutes of Health websites and professional society websites for organizations with members that treat diabetes, and a PubMed search were performed to obtain the numbers required for calculations. Second, formulas were developed to estimate the risk of non-compliance and undiagnosed diabetes. Third, risk calculations were performed using the information obtained in part one and the formulas developed in part two. Results: Direct risk reduction for diabetes-related kidney disease, stroke, heart disease, and amputation were estimated for 100% compliance with diabetes treatment. Risk, case and yearly cost reduction calculated for a 100% compliance with diabetes treatment were 13.6%, 0.9 million and US$ 9.3 billion, respectively. Conclusion: Society, insurers, policy makers and other stakeholders could invest up to these amounts in screening, education and prevention efforts in an effort to reduce these costly and traumatic sequelae of noncompliant diabetes patients.   Type: Original Research

Costs of Reducing Greenhouse Gas Emissions: A Case Study of India’s Power Generation Sector

OpenAIRE

Manish Gupta

2006-01-01

If India were to participate in any international effort towards mitigating CO2 emissions, the power sector which is one of the largest emitters of CO2 in the country would be required to play a major role. In this context the study estimates the marginal abatement costs, which correspond to the costs incurred by the power plants to reduce one unit of CO2 from the current level. The study uses an output distance function approach and its duality with the revenue function to derive these costs...

REDUCING ENVIRONMENTAL IMPACT AND COST OF PRODUCTION FOR DRYING FRUITS

Directory of Open Access Journals (Sweden)

Murad Erol

2013-12-01

Full Text Available To reduce the production costs for heat used in drying fruit plants was studied using of local biomass from tree branch pruning. The average annual get 3 t / ha biomass whit energy potential of 37 GJ/ha at a cost of up to 60 €/t. biomass at 10 - 50 mm chopped and dried below 20% can be gasefied with TLUD process characterized by high energy conversion efficiency, stability and safety in operation, emissions of CO and PM very low. TLUD process produces on average and 15% biochar that can be used as fuel or as agricultural amendment to increase fertility and for atmospheric carbon sequestration. There have been experiments simulated by model of USCMER 30/60MGB dryer equipped with two thermal modules TLUD FORTE-40 for apple slices drying heat of the apple prinings. Biomass used and biochar resulting chemical and energy were defined as micro-gasification process TLUD. That can dry 205 kg of apple slices in 6 hours with 74 kg of dry biomass to 10% of that remains and 12.2 kg biochar, biochar with or without 52 kg biomass, which costs € 8.55 or € 5.97, ie 4.3 or 6.1 times cheaper than diesel. On dry ton of sliced apple it can produce 59.6 kg biochar with soil seize -174.8 kg. CO2.

Human Responding on Random-Interval Schedules of Response-Cost Punishment: The Role of Reduced Reinforcement Density

Science.gov (United States)

Pietras, Cynthia J.; Brandt, Andrew E.; Searcy, Gabriel D.

2010-01-01

An experiment with adult humans investigated the effects of response-contingent money loss (response-cost punishment) on monetary-reinforced responding. A yoked-control procedure was used to separate the effects on responding of the response-cost contingency from the effects of reduced reinforcement density. Eight adults pressed buttons for money…

Effectiveness and cost-effectiveness of policies and programmes to reduce the harm caused by alcohol.

Science.gov (United States)

Anderson, Peter; Chisholm, Dan; Fuhr, Daniela C

2009-06-27

This paper reviews the evidence for the effectiveness and cost-effectiveness of policies and programmes to reduce the harm caused by alcohol, in the areas of education and information, the health sector, community action, driving while under the influence of alcohol (drink-driving), availability, marketing, pricing, harm reduction, and illegally and informally produced alcohol. Systematic reviews and meta-analyses show that policies regulating the environment in which alcohol is marketed (particularly its price and availability) are effective in reducing alcohol-related harm. Enforced legislative measures to reduce drink-driving and individually directed interventions to already at-risk drinkers are also effective. However, school-based education does not reduce alcohol-related harm, although public information and education-type programmes have a role in providing information and in increasing attention and acceptance of alcohol on political and public agendas. Making alcohol more expensive and less available, and banning alcohol advertising, are highly cost-effective strategies to reduce harm. In settings with high amounts of unrecorded production and consumption, increasing the proportion of alcohol that is taxed could be a more effective pricing policy than a simple increase in tax.

FY2009 Annual Progress Report for Propulsion Materials

Energy Technology Data Exchange (ETDEWEB)

none,

2010-01-16

The Propulsion Materials program focuses on enabling and innovative materials technologies that are critical in improving the efficiency of advanced engines. Projects within the Propulsion Materials Program address materials concerns that directly impact the critical technical barriers in each of these programs—barriers such as fuel efficiency, thermal management, emissions reduction, and reduced manufacturing costs.

(Super Variable Costing-Throughput Costing)

OpenAIRE

Çakıcı, Cemal

2006-01-01

(Super Variable Costing-Throughput Costing) The aim of this study is to explain the super-variable costing method which is a new subject in cost and management accounting and to show it’s working practicly.Shortly, super-variable costing can be defined as a costing method which is use only direct material costs in calculate of product costs and treats all costs except these (direct labor and overhead) as periad costs or operating costs.By using super-variable costing method, product costs ar...

Innovative Materials and Techniques in Concrete Construction : ACES Workshop

CERN Document Server

2012-01-01

Recent years have seen enormous advances in the technology of concrete as a material, through which its strength, compactness and ductility can reach levels never dreamed of before. Thanks to these improved material properties, the strength and durability of concrete structures is greatly improved, their weight and dimensions reduced, the scope of concrete as a structural material is widened and – despite the higher material costs – overall economy is possible, with positive impacts on sustainability as well. Similar advances are underway in reinforcing materials, notably high strength steel and fibre-reinforced polymers, and in the way they are combined with concrete into high performance structures. Developments in materials and equipment, as well as new concepts, have lead to innovative construction techniques, reducing cost and construction time and making possible the application of concrete under extreme conditions of construction or environment. All these advances will be highlighted in the book by...

ENHANCING VOLUNTARY COMPLIANCE BY REDUCING COMPLIANCE COSTS: A TAXPAYER SERVICE APPROACH

OpenAIRE

Glenn Jenkins; EDWIN FORLEMU

1993-01-01

In this paper an overview is made of the determinants of voluntary tax compliance. Unlike previous treatments of this subject, the cost of taxpayer compliance is considered as an important determinant of overall level of voluntary compliance in a country. A number of ways that tax authorities reduce compliance are discussed, and the most common uses of information technology in providing taxpayer service is described. Finally, the paper considers some of the ways that such activities might be...

Systems/cost: summary

International Nuclear Information System (INIS)

Grand, P.; Danby, G.; Keane, J.; Spiro, J.; Sutter, D.; Cole, F.; Hoyer, E.; Freytag, K.; Burke, R.

1978-01-01

The purpose of the meeting was to discuss and develop cost-estimating methods for heavy-ion fusion accelerator systems. The group did not consider that its purpose was to make technical judgments on proposed systems, but to develop methods for making reasonable cost estimates of these systems. Such estimates will, it is hoped, provide material for systems studies, will help in guiding research and development efforts by identifying high-leverage subsystems (areas that account for a significant part of total system cost and that might be reduced in cost by further technical development) and to begin to provide data to aid in an eventual decision on the optimum type of accelerator for heavy-ion fusion. The systems considered as examples are: (1) injection system; (2) Wideroe linac; (3) Alvarez linac; (4) induction linac; (5) superconducting accumulator ring; (6) synchrotron; (7) final rf bunching; and (8) final beam transport to target

Implementation of Continuous Video-Electroencephalography at a Community Hospital Enhances Care and Reduces Costs.

Science.gov (United States)

Kolls, Brad J; Mace, Brian E; Dombrowski, Keith E

2017-10-24

Despite data indicating the importance of continuous video-electroencephalography (cvEEG) monitoring, adoption has been slow outside major academic centers. Barriers to adoption include the need for technologists, equipment, and cvEEG readers. Advancements in lower-cost lead placement templates and commercial systems with remote review may reduce barriers to allow community centers to implement cvEEG. Here, we report our experience, lessons learned, and financial impact of implementing a community hospital cvEEG-monitoring program. We implemented an adult cvEEG service at Duke Regional Hospital (DRH), a community hospital affiliate, in June of 2012. Lead placement templates were used in the implementation to reduce the impact on technologists by using other bedside providers for EEG initiation. Utilization of the service, study quality, and patient outcomes were tracked over a 3-year period following initiation of service. Service was implemented at essentially no cost. Utilization varied from a number of factors: intensive care unit (ICU) attending awareness, limited willingness of bedside providers to perform lead placement, and variation in practice of the consulting neurologists. A total of 92 studies were performed on 88 patients in the first 3 years of the program, 24 in year one, 27 in year two, and 38 in year three, showing progressive adoption. Seizures were seen in 25 patients (27%), 19 were in status, of which 18 were successfully treated. Transfers to the main hospital, Duke University Medical Center, were prevented for 53 patients, producing an estimated cost savings of $145,750. The retained patients produced a direct contribution margin of about $75,000, and the margin was just over $100,000 for the entire monitored cohort. ICU cvEEG service is feasible and practical to implement at the community hospital level. Service was initiated at little to no cost and clearly enhanced care, increased breadth of care, increased ICU census, and reduced

Optimal distributed energy resources and the cost of reduced greenhouse gas emissions in a large retail shopping centre

International Nuclear Information System (INIS)

Braslavsky, Julio H.; Wall, Josh R.; Reedman, Luke J.

2015-01-01

Highlights: • Optimal options for distributed energy resources are analysed for a shopping centre. • A multiobjective optimisation model is formulated and solved using DER-CAM. • Cost and emission trade-offs are compared in four key optimal investment scenarios. • Moderate investment in DER technologies lowers emissions by 29.6% and costs by 8.5%. • Larger investment in DER technologies lowers emissions by 72% at 47% higher costs. - Abstract: This paper presents a case study on optimal options for distributed energy resource (DER) technologies to reduce greenhouse gas emissions in a large retail shopping centre located in Sydney, Australia. Large retail shopping centres take the largest share of energy consumed by all commercial buildings, and present a strong case for adoption of DER technologies to reduce energy costs and emissions. However, the complexity of optimally designing and operating DER systems has hindered their widespread adoption in practice. This paper examines and demonstrates the value of DER in reducing the carbon footprint of the shopping centre by formulating and solving a multiobjective optimisation problem using the Distributed Energy Resources Customer Adoption Model (DER-CAM) tool. An economic model of the shopping centre is developed in DER-CAM using on-site-specific demand, tariffs, and performance data for each DER technology option available. Four key optimal DER technology investment scenarios are then analysed by comparing: (1) solution trade-offs of costs and emissions, (2) the cost of reduced emissions attained in each investment scenario, and (3) investment benefits with respect to the business-as-usual scenario. The analysis shows that a moderate investment in combined cooling, heat and power (CCHP) technology alone can reduce annual energy costs by 8.5% and carbon dioxide-equivalent emissions by 29.6%. A larger investment in CCHP technology, in conjunction with on-site solar photovoltaic (PV) generation, can deliver

Evaluation of construction cost of pyro-partitioning plant

International Nuclear Information System (INIS)

Kinoshita, Kensuke; Kurata, Masateru; Inoue, Tadashi

1999-01-01

This study was conducted to evaluate the construction cost of a pyro-partitioning plant. The plant capacity was chosen to accommodate processing of the HLLW generated by PUREX reprocessing of 800 ton of spent LWR fuel. The block flow diagram and mass balance obtained from our previous experimental data were used to produce a detailed process-flow diagram and to design the plant. In this evaluation, the plant was estimated to cover an area of about 90 m x 70 m, and to cost $576 million for construction. This study shows that the cost of process equipments, such as reaction vessels, accountability tanks and so on, is just about 13% of total construction cost. On the other hand, the cost of process robots and the equipments for key measurement point (KMP) is major part in the cost of in-cell equipment. So it is clear that the construction cost can be reduced by reducing the number of material balance area (MBA) and KMP. (author)

Die casting copper motor rotors: mold materials and processing for cost-effective manufacturing

Energy Technology Data Exchange (ETDEWEB)

Peters, D.T.; Cowie, J.G.; Brush, E.F. Jr.

2000-07-01

This project seeks to demonstrate mold materials for copper pressure die-casting that are cost-effective and practical for production use in die-casting copper motor rotors. The incorporation of die-cast copper for conductor bars and end rings of the induction motor in place of aluminum would result in attractive improvements in motor energy efficiency through reductions in motor losses ranging from 15% to 20%. Die-cast motor rotors are produced in aluminum today because rotor fabrication by pressure die-casting is an established practice. Lack of a durable and cost-effective mold material has been the technical barrier preventing manufacture of the die-cast copper rotor. This project tested H-13 steel die inserts that establish the baseline. Nickel-, tungsten-, and molybdenum-based high temperature alloys were extensively tested. Results indicate that substantially extended die life is possible using high temperature die materials, pre-heated and operated at elevated temperatures. Pre-heating and high operating temperatures were shown to be critical in extending the die life by decreasing the cyclic stresses associated with thermal expansion. Extended die life provides the opportunity for economically viable copper motor rotor die-casting. (orig.)

Solution of resource allocation problem for identification of cost-effective measures to reduce nuclear proliferation risks

International Nuclear Information System (INIS)

Andrianov, A.; Kuptsov, I.

2013-01-01

This report presents a methodology of selection of cost-effective measures to reduce nuclear proliferation risks. The methodology relies on a graded security model used in practice in different applications. The method is based on the controlled finite Markov chain approach set in combination with discrete dynamic programming and MCDM (Multi Criteria Decision Making) techniques that enables the expert to select the cost-effective measures to reduce nuclear proliferation risks depending on availability of resources. The analysis performed with different number of possible measures confirms the conclusions that the implementation of extra-large costs may not produce the required effect, and the increase in resources above a certain level does not appear sensitive. Diversification in improving the effectiveness of other measures seems more rational and efficient for the whole system than the unlimited improvement of the effectiveness of only one measure

Solution of resource allocation problem for identification of cost-effective measures to reduce nuclear proliferation risks

Energy Technology Data Exchange (ETDEWEB)

Andrianov, A.; Kuptsov, I. [Obninsk Institute for Nuclear Power Engineering, Studgorodok 1, Obninsk, Kaluga region 249030 (Russian Federation)

2013-07-01

This report presents a methodology of selection of cost-effective measures to reduce nuclear proliferation risks. The methodology relies on a graded security model used in practice in different applications. The method is based on the controlled finite Markov chain approach set in combination with discrete dynamic programming and MCDM (Multi Criteria Decision Making) techniques that enables the expert to select the cost-effective measures to reduce nuclear proliferation risks depending on availability of resources. The analysis performed with different number of possible measures confirms the conclusions that the implementation of extra-large costs may not produce the required effect, and the increase in resources above a certain level does not appear sensitive. Diversification in improving the effectiveness of other measures seems more rational and efficient for the whole system than the unlimited improvement of the effectiveness of only one measure.

Reduced prosthetic stiffness lowers the metabolic cost of running for athletes with bilateral transtibial amputations.

Science.gov (United States)

Beck, Owen N; Taboga, Paolo; Grabowski, Alena M

2017-04-01

Inspired by the springlike action of biological legs, running-specific prostheses are designed to enable athletes with lower-limb amputations to run. However, manufacturer's recommendations for prosthetic stiffness and height may not optimize running performance. Therefore, we investigated the effects of using different prosthetic configurations on the metabolic cost and biomechanics of running. Five athletes with bilateral transtibial amputations each performed 15 trials on a force-measuring treadmill at 2.5 or 3.0 m/s. Athletes ran using each of 3 different prosthetic models (Freedom Innovations Catapult FX6, Össur Flex-Run, and Ottobock 1E90 Sprinter) with 5 combinations of stiffness categories (manufacturer's recommended and ± 1) and heights (International Paralympic Committee's maximum competition height and ± 2 cm) while we measured metabolic rates and ground reaction forces. Overall, prosthetic stiffness [fixed effect (β) = 0.036; P = 0.008] but not height ( P ≥ 0.089) affected the net metabolic cost of transport; less stiff prostheses reduced metabolic cost. While controlling for prosthetic stiffness (in kilonewtons per meter), using the Flex-Run (β = -0.139; P = 0.044) and 1E90 Sprinter prostheses (β = -0.176; P = 0.009) reduced net metabolic costs by 4.3-4.9% compared with using the Catapult prostheses. The metabolic cost of running improved when athletes used prosthetic configurations that decreased peak horizontal braking ground reaction forces (β = 2.786; P = 0.001), stride frequencies (β = 0.911; P < 0.001), and leg stiffness values (β = 0.053; P = 0.009). Remarkably, athletes did not maintain overall leg stiffness across prosthetic stiffness conditions. Rather, the in-series prosthetic stiffness governed overall leg stiffness. The metabolic cost of running in athletes with bilateral transtibial amputations is influenced by prosthetic model and stiffness but not height. NEW & NOTEWORTHY We measured the

FY 2012 Lightweight Materials Annual Report

Energy Technology Data Exchange (ETDEWEB)

None

2013-04-15

The FY 2012 Annual Progress Report for Lightweight Materials provides a detailed description of the activities and technical accomplishments which focuses on the development and validation of advanced materials and manufacturing technologies to significantly reduce light and heavy duty vehicle weight without compromising other attributes such as safety, performance, recyclability, and cost.

Older adults learn less, but still reduce metabolic cost, during motor adaptation

Science.gov (United States)

Huang, Helen J.

2013-01-01

The ability to learn new movements and dynamics is important for maintaining independence with advancing age. Age-related sensorimotor changes and increased muscle coactivation likely alter the trial-and-error-based process of adapting to new movement demands (motor adaptation). Here, we asked, to what extent is motor adaptation to novel dynamics maintained in older adults (≥65 yr)? We hypothesized that older adults would adapt to the novel dynamics less well than young adults. Because older adults often use muscle coactivation, we expected older adults to use greater muscle coactivation during motor adaptation than young adults. Nevertheless, we predicted that older adults would reduce muscle activity and metabolic cost with motor adaptation, similar to young adults. Seated older (n = 11, 73.8 ± 5.6 yr) and young (n = 15, 23.8 ± 4.7 yr) adults made targeted reaching movements while grasping a robotic arm. We measured their metabolic rate continuously via expired gas analysis. A force field was used to add novel dynamics. Older adults had greater movement deviations and compensated for just 65% of the novel dynamics compared with 84% in young adults. As expected, older adults used greater muscle coactivation than young adults. Last, older adults reduced muscle activity with motor adaptation and had consistent reductions in metabolic cost later during motor adaptation, similar to young adults. These results suggest that despite increased muscle coactivation, older adults can adapt to the novel dynamics, albeit less accurately. These results also suggest that reductions in metabolic cost may be a fundamental feature of motor adaptation. PMID:24133222

Cost of transporting irradiated fuels and maintenance costs of a chemical treatment plant for irradiated fuels

International Nuclear Information System (INIS)

Sousselier, Y.

1964-01-01

Numerous studies have been made of the cost of a fuel cycle, but many of them are based on a priori studies and are therefore to be treated with reserve. Thus, in the part dealing with the treatment of irradiated fuels, some important factors in the cost have only rarely been given on the basis of practical experience: the cost of transporting the fuels themselves and the plant maintenance costs. Investigations relating to transport costs are generally based on calculations made from somewhat arbitrary data. The studies carried out in France on the transport of irradiated uranium between the EDF reactors at Chinon and the retreatment plant at La Hague of the irradiated uranium from research reactors to foreign retreatment plants, are reported; they show that by a suitable choice of transport containers and details of expedition it has been possible to reduce the costs very considerably. This has been achieved either by combining rail and road transport or by increasing the writ capacities of the transport containers: an example is given of a container for swimming-pool pile elements which can transport a complete pile core at one time, thus substantially reducing the cost. Studies concerning the maintenance costs of retreatment plants are rarer still, although in direct maintenance plants these figures represent an appreciable fraction of the total treatment cost. An attempt has been made, on the basis of operational experience of a plant, to obtain some idea of these costs. Only maintenance proper has been considered, excluding subsidiary operations such as the final decontamination of apparatus, the burial of contaminated material and radioprotection operations Maintenance has been divided into three sections: mechanical maintenance, maintenance of electrical equipment and maintenance of control and adjustment apparatus. In each of these sections the distinction has been made between manpower and the material side. In order to allow comparisons to be made with

New roller cone bits with unique nozzle designs reduce drilling costs

International Nuclear Information System (INIS)

Moffitt, S.R.; Pearce, D.E.; Ivie, C.R.

1992-01-01

This paper reports that selection of the optimum rock bit design to achieve the lowest drilling cost in a given application is often difficult due to a large number of rock bit performance considerations. However, in a majority of applications increased penetration rate is the key consideration in reducing drilling costs. Discovery of a new bit design concept has led to the development of roller cone bits that achieve significant penetration rate increases using superior hydraulic nozzle designs. Prototype designs have achieved 20 to 40% increases in penetration rate with comparable footage drilled when tested in 6 1/2, 8 1/2, 8-3/4, 9-7/8 and 12 1/4 IADC 437, 517 and 537 type bits in the U.S., North Sea, Italy, and Oman. Second-generation designs tested in a full-scale drilling laboratory have delivered 70% increases in penetration rates

Sulphur extended oil sand mix : paving material for lower transport cost and CO{sub 2} reduction : ASRL Syncrude research project 1995

Energy Technology Data Exchange (ETDEWEB)

Aquin d' , G. [Con-Sul Inc., Missoula, MT (United States)

2010-07-01

This power point presentation discussed the use of sulphur-enhanced oil sands (SEOS) as a paving mixture. Sulphur has been added to asphaltic bitumen paving processes since the 1850s. Research into sulphur additions has been conducted by various Canadian industry members and institutions. A study in 1995 investigated the use of SEOS as a temporary paving material. The benefits of using SEOS included lower capital costs and lower greenhouse gas (GHG) impacts. Increases in equipment efficiency were also observed. Researchers are now developing mixing protocols and testing various paving materials in relation to temperature regimes and percentages of sulphur. Sand, limestone, coke, and rubber additions are also being evaluated, as well as the behaviour of SEOS in freeze-thaw cycles. To date, the studies have indicated that a 30 percent sulphur, 10 percent sand, and 60 percent oil sand mixture provides optimal compression and behaviour under freeze-thaw conditions. The use of SEOS paving at oil sands mine sites will reduce truck and road maintenance as well as reduce fuel emissions and consumption rates. tabs., figs.

Cost-effectiveness of feeding strategies to reduce greenhouse gas emissions from dairy farming.

Science.gov (United States)

Van Middelaar, C E; Dijkstra, J; Berentsen, P B M; De Boer, I J M

2014-01-01

The objective of this paper was to evaluate the cost-effectiveness of 3 feeding strategies to reduce enteric CH4 production in dairy cows by calculating the effect on labor income at the farm level and on greenhouse gas (GHG) emissions at the chain level (i.e., from production of farm inputs to the farm gate). Strategies included were (1) dietary supplementation of an extruded linseed product (56% linseed; 1kg/cow per day in summer and 2kg/cow per day in winter), (2) dietary supplementation of a nitrate source (75% nitrate; 1% of dry matter intake), and (3) reducing the maturity stage of grass and grass silage (grazing at 1,400 instead of 1,700kg of dry matter/ha and harvesting at 3,000 instead of 3,500kg of dry matter/ha). A dairy farm linear programing model was used to define an average Dutch dairy farm on sandy soil without a predefined feeding strategy (reference situation). Subsequently, 1 of the 3 feeding strategies was implemented and the model was optimized again to determine the new economically optimal farm situation. Enteric CH4 production in the reference situation and after implementing the strategies was calculated based on a mechanistic model for enteric CH4 and empirical formulas explaining the effect of fat and nitrate supplementation on enteric CH4 production. Other GHG emissions along the chain were calculated using life cycle assessment. Total GHG emissions in the reference situation added up to 840kg of CO2 equivalents (CO2e) per t of fat- and protein-corrected milk (FPCM) and yearly labor income of €42,605. Supplementation of the extruded linseed product reduced emissions by 9kg of CO2e/t of FPCM and labor income by €16,041; supplementation of the dietary nitrate source reduced emissions by 32kg of CO2e/t of FPCM and labor income by €5,463; reducing the maturity stage of grass and grass silage reduced emissions by 11kg of CO2e/t of FPCM and labor income by €463. Of the 3 strategies, reducing grass maturity was the most cost

Advanced technology heavy water monitors offering reduced implementation costs

International Nuclear Information System (INIS)

Kalechstein, W.; Hippola, K.B.

1984-10-01

The development of second generation heavy water monitors for use at CANDU power stations and heavy water plants has been completed and the instruments brought to the stage of commercial availability. Applications of advanced technology and reduced utilization of custom manufactured components have together resulted in instruments that are less expensive to produce than the original monitors and do not require costly station services. The design has been tested on two prototypes and fully documented, including the inspection and test procedures required for manufacture to the CSA Z299.3 quality verfication program standard. Production of the new monitors by a commercial vendor (Barringer Research Ltd.) has begun and the first instrument is scheduled for delivery to CRNL's NRU reactor in late 1984

An ultraviolet photodetector fabricated from WO3 nanodiscs/reduced graphene oxide composite material

International Nuclear Information System (INIS)

Shao Dali; Sawyer, Shayla; Yu Mingpeng; Lian Jie

2013-01-01

A high sensitivity, fast ultraviolet (UV) photodetector was fabricated from WO 3 nanodiscs (NDs)/reduced graphene oxide (RGO) composite material. The WO 3 NDs/reduced GO composite material was synthesized using a facile three-step synthesis procedure. First, the Na 2 WO 4 /GO precursor was synthesized by homogeneous precipitation. Second, the Na 2 WO 4 /GO precursor was transformed into H 2 WO 4 /GO composites by acidification. Finally, the H 2 WO 4 /GO composites were reduced to WO 3 NDs/RGO via a hydrothermal reduction process. The UV photodetector showed a fast transient response and high responsivity, which are attributed to the improved carrier transport and collection efficiency through graphene. The excellent material properties of the WO 3 NDs/RGO composite demonstrated in this work may open up new possibilities for using WO 3 NDs/RGO for future optoelectronic applications. (paper)

Reusable single-port access device shortens operative time and reduces operative costs.

Science.gov (United States)

Shussman, Noam; Kedar, Asaf; Elazary, Ram; Abu Gazala, Mahmoud; Rivkind, Avraham I; Mintz, Yoav

2014-06-01

In recent years, single-port laparoscopy (SPL) has become an attractive approach for performing surgical procedures. The pitfalls of this approach are technical and financial. Financial concerns are due to the increased cost of dedicated devices and prolonged operating room time. Our aim was to calculate the cost of SPL using a reusable port and instruments in order to evaluate the cost difference between this approach to SPL using the available disposable ports and standard laparoscopy. We performed 22 laparoscopic procedures via the SPL approach using a reusable single-port access system and reusable laparoscopic instruments. These included 17 cholecystectomies and five other procedures. Operative time, postoperative length of stay (LOS) and complications were prospectively recorded and were compared with similar data from our SPL database. Student's t test was used for statistical analysis. SPL was successfully performed in all cases. Mean operative time for cholecystectomy was 72 min (range 40-116). Postoperative LOS was not changed from our standard protocols and was 1.1 days for cholecystectomy. The postoperative course was within normal limits for all patients and perioperative morbidity was recorded. Both operative time and length of hospital stay were shorter for the 17 patients who underwent cholecystectomy using a reusable port than for the matched previous 17 SPL cholecystectomies we performed (p cost difference. Operating with a reusable port ended up with an average cost savings of US$388 compared with using disposable ports, and US$240 compared with standard laparoscopy. Single-port laparoscopic surgery is a technically challenging and expensive surgical approach. Financial concerns among others have been advocated against this approach; however, we demonstrate herein that using a reusable port and instruments reduces operative time and overall operative costs, even beyond the cost of standard laparoscopy.

Using collaborative work groups to reduce O ampersand M costs

International Nuclear Information System (INIS)

Francoeur, R.; Jones, J.N.

1995-01-01

Commonwealth Edison Company (ComEd) entered the nineties burdened with external distractions from its core business of power generation. Its unresolved 1987 rate case continued to face intervention in the courts. Some of its largest industrial and municipal customers were exploring more economical alternatives. The new convention facility in Chicago actually engaged an independent energy supplier. Retail wheeling was the hot topic, and internal problems were present. Operations and Maintenance (O ampersand M) costs were steadily increasing. Two of their six nuclear stations were on the Nuclear Regulatory Commission's Watch List. Immediate changes had to occur if ComEd was to ensure its future competitiveness. At ComEd Braidwood Nuclear Power Station some untraditional work methodologies were embarked upon to help the parent company reduce its O ampersand M costs. Various types of collaborative work groups were formed, and have succeeded in lowering O ampersand M costs through shorter refueling outages and the use of fewer contracted personnel. These collaborative work groups are listed below and are described in detail in the remainder of this paper: (1) A core group of Maintenance Modification Contractor (MMC) supervision integrated into the Owner's Maintenance Staff, (2) A Corporate Outage Support Group of supervisory personnel which supplements the site's Maintenance Staff, (3) The Integrated Outage and Turbine Overhaul Contractor using a mixture of its own and Maintenance Staff supervisory personnel during outages with the Owner supplementing craft support using a third-party, (4) Six nuclear stations sharing key MMC personnel to insure experienced individuals are used effectively, and (5) Composite teams of maintenance personnel working across defined disciplines Braidwood Station has capitalized on the strategy of positive collaboration to become one of the lowest cost producers of nuclear power. Its use has enabled the Station to successfully complete the

Green roofs: roof system reducing heating and cooling costs

Directory of Open Access Journals (Sweden)

Konasova, Sarka

2016-06-01

Full Text Available Green roofs are among the passive building systems that contribute to the thermal stability of the rooms under the roof in both summer and winter. Green roofs can provide a significant contribution to the thermal balance of the protected space. Over the past ten years, many studies have been carried out to investigate the energy benefits of green roofs in terms of the energy performance of buildings. These studies show that the installation of vegetated cover can achieve energy savings for both winter heating and summer cooling. The green roof, as a thermal insulation, reduces the amount of building operating energy costs and reduces heat losses. This article summarizes current literature and points to situations in which green roofs can play an important role in saving energy for heating and cooling due to improved thermal insulating function of the roof, in case of extensive vegetation coverage without significant overloading of the roof structure and associated over-dimensioning. It is important to note that these energy savings always depend on the particular climate, the type of building and the availability and the type of roof structure.

SunShot solar power reduces costs and uncertainty in future low-carbon electricity systems.

Science.gov (United States)

Mileva, Ana; Nelson, James H; Johnston, Josiah; Kammen, Daniel M

2013-08-20

The United States Department of Energy's SunShot Initiative has set cost-reduction targets of $1/watt for central-station solar technologies. We use SWITCH, a high-resolution electricity system planning model, to study the implications of achieving these targets for technology deployment and electricity costs in western North America, focusing on scenarios limiting carbon emissions to 80% below 1990 levels by 2050. We find that achieving the SunShot target for solar photovoltaics would allow this technology to provide more than a third of electric power in the region, displacing natural gas in the medium term and reducing the need for nuclear and carbon capture and sequestration (CCS) technologies, which face technological and cost uncertainties, by 2050. We demonstrate that a diverse portfolio of technological options can help integrate high levels of solar generation successfully and cost-effectively. The deployment of GW-scale storage plays a central role in facilitating solar deployment and the availability of flexible loads could increase the solar penetration level further. In the scenarios investigated, achieving the SunShot target can substantially mitigate the cost of implementing a carbon cap, decreasing power costs by up to 14% and saving up to $20 billion ($2010) annually by 2050 relative to scenarios with Reference solar costs.

An assessment of monitoring requirements and costs of 'Reduced Emissions from Deforestation and Degradation'

Directory of Open Access Journals (Sweden)

McCallum Ian

2009-08-01

Full Text Available Abstract Background Negotiations on a future climate policy framework addressing Reduced Emissions from Deforestation and Degradation (REDD are ongoing. Regardless of how such a framework will be designed, many technical solutions of estimating forest cover and forest carbon stock change exist to support policy in monitoring and accounting. These technologies typically combine remotely sensed data with ground-based inventories. In this article we assess the costs of monitoring REDD based on available technologies and requirements associated with key elements of REDD policy. Results We find that the design of a REDD policy framework (and specifically its rules can have a significant impact on monitoring costs. Costs may vary from 0.5 to 550 US$ per square kilometre depending on the required precision of carbon stock and area change detection. Moreover, they follow economies of scale, i.e. single country or project solutions will face relatively higher monitoring costs. Conclusion Although monitoring costs are relatively small compared to other cost items within a REDD system, they should be shared not only among countries but also among sectors, because an integrated monitoring system would have multiple benefits for non-REDD management. Overcoming initialization costs and unequal access to monitoring technologies is crucial for implementation of an integrated monitoring system, and demands for international cooperation.

Applying Cross-Decking and Activity-Based Costing to Military Distribution Centers: A Proposed Framework

National Research Council Canada - National Science Library

Elliott, Jonathan

1997-01-01

.... Cross-docking is a commercially proven approach to material distribution through a distribution center that can help reduce inventories, speed material flows, and cut related logistics activity costs...

FY2010 Annual Progress Report for Lightweighting Materials

Energy Technology Data Exchange (ETDEWEB)

none,

2011-01-15

The Lightweight Materials activity (LM) within the Vehicle Technologies Program focuses on the development and validation of advanced materials and manufacturing technologies to significantly reduce light and heavy duty vehicle weight without compromising other attributes such as safety, performance, recyclability, and cost.

Concurrent Development and Cost-Benefit Analysis of Paper-Based and Digitized Instructional Material.

Science.gov (United States)

Annand, David

2002-01-01

Describes the simultaneous development of paper-based and digitized versions of a textbook and related instructional material used in an undergraduate, independent study, distance education course at Athabasca University (Canada). Used break-even analysis as an initial evaluation measure to determine cost-effectiveness, and discusses the next…

Cost of quality assurance in radiotherapy: human and material requirements

International Nuclear Information System (INIS)

Caudrelier, V.; Garcia, R.; Chauvet, B.; Bourhis, J.

2005-01-01

In 2004, three new important laws were passed concerning radiotherapy services. The first two concerns the internal and external quality control of linear accelerators and the last concerns the role of the medical physicist, whose presence was made mandatory during the whole length of the treatments. These laws, which aim to improve the quality and the security of treatments, represent an increase in price that we have calculated, and which prevents them being implemented, as a joint study realised by the SFRO and the SFPM has shown. The cost of quality in radiotherapy requires investment in material and manpower and improvement in availability of the accelerators which entails a complete reorganization of the services. Cost analysis is included. The difficulties in implementing these laws have also been evaluated and this evaluation already enables us to propose certain elements enabling us to go forward to globally improve the quality and security in radiotherapy. (author)

Reducing operating costs: A collaborative approach between industry and electric utilities

International Nuclear Information System (INIS)

Tyers, B.; Sibbald, L.

1993-01-01

The unit cost of electricity to industrial consumers is expected to increase at a rate of 5% annually in the 1990s. The partnership that has been created between Amoco Canada Petroleum Company and TransAlta Utilities to control the cost of electricity is described. To allow the company to receive lower rates for interruptible power, a number of measures have been taken. The Amoco Whitecourt plant has standby generators in reserve that can be used when utility power is not available. A Pembina compressor can be turned off for up to 12 hours, at 30 minutes notice, without affecting field pressure. At the East Crossfield plant sales gas can be compressed using electricity or a gas-driven engine. Spot market energy is used in a number of plants allowing electric drive alternatives to plant operators and offering short term energy markets. TransAlta invests in electrical equipment such as switchgear as well as transmission lines and transformers. New rate alternatives offered by TransAlta Utilities include review of the need for a demand ratchet, additional time of use rates, unbundling of rates allowing power purchase from alternative sources, rates that follow product costs, reduced rates for conversion of gas to electric drives certain circumstances, energy audits, and power factor credits. 5 figs

Cost-effectiveness of feeding strategies to reduce greenhouse gas emissions from dairy farming

NARCIS (Netherlands)

Middelaar, van C.E.; Dijkstra, J.; Berentsen, P.B.M.; Boer, de I.J.M.

2014-01-01

The objective of this paper was to evaluate the cost-effectiveness of 3 feeding strategies to reduce enteric CH4 production in dairy cows by calculating the effect on labor income at the farm level and on greenhouse gas (GHG) emissions at the chain level (i.e., from production of farm inputs to the

Framework for Reducing Teaching Challenges Relating to Improvisation of Science Education Equipment and Materials in Schools

Science.gov (United States)

Akuma, Fru Vitalis; Callaghan, Ronel

2016-01-01

The science education budget of many secondary schools has decreased, while shortages and environmental concerns linked to conventional Science Education Equipment and Materials (SEEMs) have emerged. Thus, in some schools, resourceful educators produce low-cost equipment from basic materials and use these so-called improvised SEEMs in practical…

Materials used in automobile manufacture - current state and perspectives

International Nuclear Information System (INIS)

Wilhelm, M.

1993-01-01

The materials which are applied in modern motor vehicles can be considered to be optimally accommodated to the actual demands. Normally a change of materials is only required if by that a cost reduction can be realized, or if the demands change. Such changes at present or in the near future mainly concern ecological aspects: consumption reduction; weight reduction; low emission of pollutants by vehicles and in the production process; recycling of materials. Those materials in question which better accommodate the new requirements can be: improved variants of actually applied materials; fully developed materials approved already in other technical areas but not yet applied in automotive engineering; newly developed materials. Starting from the actual conception examples will be given for each category. They will show that the cost of future materials tend to be higher, but that even with more expensive materials sometimes the cost of a component can be reduced. (orig.)

Options for cost-effectively reducing atmospheric methane concentrations from anthropogenic biomass sources

International Nuclear Information System (INIS)

Roos, K.F.; Jacobs, C.; Orlic, M.

1993-01-01

Methane is a major greenhouse gas, second only to carbon dioxide in its contribution to future global warming. Methane concentrations have more than doubled over the last two centuries and continue to rise annually. These increases are largely correlated with increasing human populations. Methane emissions from human related activities currently account for about 70 percent of annual emissions. Of these human related emissions, biomass sources account for about 75 percent and non-biomass sources about 25 percent. Because methane has a shorter lifetime than other major greenhouse gases, efforts to reduce methane emissions may fairly quickly be translated into lower atmospheric concentrations of methane and lower levels of radiative forcing. This fairly quick response would have the benefit of slowing the rate of climate change and hence allow natural ecosystems more time to adapt. Importantly, methane may be cost-effectively reduced from a number of biomass and non-biomass sources in the United States and worldwide. Methane is a valuable fuel, not just a waste by-product, and often systems may be reconfigured to reap the fuel value of the methane and more than justify the necessary expenditures. Such options for reducing methane emission from biomass sources exist for landfills, livestock manures, and ruminant livestock, and have been implemented to varying degrees in countries around the world. However, there are a number of barriers that hinder the more widespread use of technologies, including institutional, financial, regulatory, informational, and other barriers. This paper describes an array of available options that may be cost-effectively implemented to reduce methane emissions from biomass sources. This paper also discusses a number of programs that have been developed in the United States and internationally to promote the implementation of these methane reduction options and overcome existing barriers

Great hammerhead sharks swim on their side to reduce transport costs.

Science.gov (United States)

Payne, Nicholas L; Iosilevskii, Gil; Barnett, Adam; Fischer, Chris; Graham, Rachel T; Gleiss, Adrian C; Watanabe, Yuuki Y

2016-07-26

Animals exhibit various physiological and behavioural strategies for minimizing travel costs. Fins of aquatic animals play key roles in efficient travel and, for sharks, the functions of dorsal and pectoral fins are considered well divided: the former assists propulsion and generates lateral hydrodynamic forces during turns and the latter generates vertical forces that offset sharks' negative buoyancy. Here we show that great hammerhead sharks drastically reconfigure the function of these structures, using an exaggerated dorsal fin to generate lift by swimming rolled on their side. Tagged wild sharks spend up to 90% of time swimming at roll angles between 50° and 75°, and hydrodynamic modelling shows that doing so reduces drag-and in turn, the cost of transport-by around 10% compared with traditional upright swimming. Employment of such a strongly selected feature for such a unique purpose raises interesting questions about evolutionary pathways to hydrodynamic adaptations, and our perception of form and function.

Use of configuration management to reduce development costs in metal parts

International Nuclear Information System (INIS)

Kalsoom, T.; Ahmad, S.

2005-01-01

In development and manufacturing phases of metal parts, design efforts are converted in set of engineering data pack under the given guidelines of Configuration Management (CM). These engineering documents define Configuration Management of metal parts production in a local industry. The development phase is normally less structured and open to Engineering Change Proposals. In our local engineering organizations most of the work done is normally not well documented for future revisions and modernization. This leads to delays in development and increase in production costs of metal parts. This becomes more pronounced if any member of the design team disassociates and leaves the organization. The Configuration Management helps to reduce development costs by providing infrastructure for product identification, documentation, change control, interface control and technical reviews and product audits. Automated or Computer-Assisted CM activities can also be used to shorten response time and increase accuracy and reliability of the produced metal components. (author)

Technetium Sorption By Cementitious Materials Under Reducing Conditions

International Nuclear Information System (INIS)

Kaplan, Daniel I.; Estes, Shanna L.; Arai, Yuji; Powell, Brian A.

2013-01-01

The objective of this study was to measure Tc sorption to cementitious materials under reducing conditions to simulate Saltstone Disposal Facility conditions. Earlier studies were conducted and the experimental conditions were found not to simulate those of the facility. Through a five month subcontract with Clemson University, sorption of 99 Tc to four cementitious materials was examined within an anaerobic glovebag targeting a 0.1% H 2 (g)/ 99.9% N 2 (g) atmosphere. Early experiments based on Tc sorption and Eh indicated that 0.1% H 2 (g) (a reductant) was necessary to preclude experimental impacts from O 2 (g) diffusion into the glovebag. Preliminary data to date (up to 56 days) indicates that sorption of 99 Tc to cementitious materials increased with increasing slag content for simulated saltstone samples. This is consistent with the conceptual model that redox active sulfide groups within the reducing slag facilitate reduction of Tc(VII) to Tc(IV). These experiments differ from previous experiments where a 2% H 2 (g) atmosphere was maintained (Kaplan et al., 2011 (SRNL-STI-2010-00668)). The impact of the 2% H 2 (g) reducing atmosphere on this data was examined and determined to cause the reduction of Tc in experimental samples without slag. In the present ongoing study, after 56 days, Tc sorption by the 50-year old cement samples (no slag) was undetectable, whereas Tc sorption in the cementitious materials containing slag continues to increase with contact time (measured after 1, 4, 8, 19 and 56 days). Sorption was not consistent with spike concentrations and steady state has not been demonstrated after 56 days. The average conditional K d value for the Vault 2 cementitious material was 873 mL/g (17% slag), for the TR547 Saltstone (45% slag) the conditional K d was 168 mL/g, and for TR545 (90% slag) the conditional K d was 1,619 mL/g. It is anticipated that additional samples will be collected until steady state conditions are established to permit measuring

Innovative manufacturing and materials for low cost lithium ion batteries

Energy Technology Data Exchange (ETDEWEB)

Carlson, Steven [Optodot Corporation, Woburn, MA (United States)

2015-12-29

This project demonstrated entirely new manufacturing process options for lithium ion batteries with major potential for improved cost and performance. These new manufacturing approaches are based on the use of the new electrode-coated separators instead of the conventional electrode-coated metal current collector foils. The key enabler to making these electrode-coated separators is a new and unique all-ceramic separator with no conventional porous plastic separator present. A simple, low cost, and high speed manufacturing process of a single coating of a ceramic pigment and polymer binder onto a re-usable release film, followed by a subsequent delamination of the all-ceramic separator and any layers coated over it, such as electrodes and metal current collectors, was utilized. A suitable all-ceramic separator was developed that demonstrated the following required features needed for making electrode-coated separators: (1) no pores greater than 100 nanometer (nm) in diameter to prevent any penetration of the electrode pigments into the separator; (2) no shrinkage of the separator when heated to the high oven heats needed for drying of the electrode layer; and (3) no significant compression of the separator layer by the high pressure calendering step needed to densify the electrodes by about 30%. In addition, this nanoporous all-ceramic separator can be very thin at 8 microns thick for increased energy density, while providing all of the performance features provided by the current ceramic-coated plastic separators used in vehicle batteries: improved safety, longer cycle life, and stability to operate at voltages up to 5.0 V in order to obtain even more energy density. The thin all-ceramic separator provides a cost savings of at least 50% for the separator component and by itself meets the overall goal of this project to reduce the cell inactive component cost by at least 20%. The all-ceramic separator also enables further cost savings by its excellent heat stability

Reducing the costs of landscape restoration by using invasive alien plant biomass for bioenergy

CSIR Research Space (South Africa)

Stafford, William HL

2018-02-01

Full Text Available reviews the extent of IAPs as well as efforts to eradicate them, and identifies value-adding opportunities to use the cleared IAP biomass for reducing the costs of landscape restoration. Since bioenergy is suited to a large portion of the biomass...

The benefits and costs of reducing emissions from the electricity sector.

Science.gov (United States)

Palmer, Karen; Burtraw, Dallas; Shih, Jhih-Shyang

2007-04-01

Recent federal policy proposals to reduce emissions of sulfur dioxide (SO(2)), nitrogen oxides (NO(x)), and mercury from the US electricity sector promise important improvements in air quality and reductions in acid deposition. The cost of achieving these reductions depends on the form and stringency of the regulation. In this research, we analyze the economic benefits and costs of the US Environmental Protection Agency's (EPA's) Clean Air Interstate Rule (CAIR) as characterized in the supplemental rule proposed in June 2004, and the Clean Air Mercury Rule (CAMR) as proposed in February 2004. The assessment integrates a model of the electricity sector, two models of atmospheric transport of air pollutants, and a model of environmental and public health endpoints affected by pollution. We model explicitly the emissions of SO(2), NO(x), mercury and carbon dioxide (CO(2)) and the effects of changes in emissions of SO(2) and NO(x) on environmental and public health. The manner in which mercury emissions are regulated will have important implications not only for the cost of the regulation, but also for emission levels for SO(2) and NO(x) and where those emissions are located. We find the economic benefits of CAIR and CAMR are far greater than the costs. Recent estimates of benefits of reductions in mercury and acidification indicate that our model captures the lion's share of quantifiable benefits. We also find that the EPA would have been justified on economic grounds in pursuing additional SO(2) emissions reductions beyond the requirements of CAIR.

Development of a low-cost double rotor axial flux motor with soft magnetic composite and ferrite permanent magnet materials

Science.gov (United States)

Liu, Chengcheng; Zhu, Jianguo; Wang, Youhua; Guo, Youguang; Lei, Gang; Liu, Xiaojing

2015-05-01

This paper proposes a low-cost double rotor axial flux motor (DRAFM) with low cost soft magnetic composite (SMC) core and ferrite permanent magnets (PMs). The topology and operating principle of DRAFM and design considerations for best use of magnetic materials are presented. A 905 W 4800 rpm DRAFM is designed for replacing the high cost NdFeB permanent magnet synchronous motor (PMSM) in a refrigerator compressor. By using the finite element method, the electromagnetic parameters and performance of the DRAFM operated under the field oriented control scheme are calculated. Through the analysis, it is shown that that the SMC and ferrite PM materials can be good candidates for low-cost electric motor applications.

Organizations Working to Reduce the Disposal of Construction and Demolition (C&D) Materials

Science.gov (United States)

Organizations with available resources and services related to reducing, reducing, and recycling C&D Materials? This table is a great place to start! Use the three tabs below to easily sort the data and best meet your needs.

Defense Inventory Management: Expanding Use of Best Practices for Hardware Items Can Reduce Logistics Costs

National Research Council Canada - National Science Library

1998-01-01

...) logistics practices with those of the private sector. We are continuously examining DOD'S inventory management practices to identify areas where costs can be reduced and problems can be avoided by using leading private sector practices...

Ventilation cost impact of reduced radon-daughter working levels

International Nuclear Information System (INIS)

Bates, R.C.

1981-01-01

Published information on costs of radon-daughter control in uranium mines was analyzed to develop estimates of the cost per ton for any level of radiation exposure control. All data were converted to 1967 cost of living index to provide a common analysis base. Results of the analysis show that the cost per ton increases exponentially as the radiation level is lowered. A linear relationship with the cost of living index is assumed, and equations and graphs are provided to estimate control cost per ton for any exposure control level and cost of living index

Technical criteria for terminating or reducing domestic safeguards on low-grade special nuclear material

International Nuclear Information System (INIS)

Crawford, D.W.

1996-01-01

A graded table for terminating or reducing domestic safeguards has been developed for use by programs and facilities within the Department of Energy in decisions regarding the need for or levels of protection of low-grade nuclear materials. Contained in this table are technical criteria which can allow for complete removal of safeguards over many special nuclear material forms and concentrations of typical low-grade materials either currently located at generating or processing sites and materials which may arise from processing operations related to stabilization and disposition activities. In addition, these criteria include higher concentration levels which may warrant maintaining some level of (albeit reduced) security on low-grade materials while allowing reductions in materials control and accountability requirements. These reductions can range from complete removal of these materials from materials control and accountability requirements such as measurements, physical inventories and recordkeeping, to deferring these measurements and physical inventories until a time that either the material is removed from the site or resubmitted for processing. It is important to note that other conditions contained in current Departmental safeguards and security policy be met prior to safeguards termination or reduction

Design of Boiler Welding for Improvement of Lifetime and Cost Control.

Science.gov (United States)

Thong-On, Atcharawadi; Boonruang, Chatdanai

2016-11-03

Fe-2.25Cr-1Mo a widely used material for headers and steam tubes of boilers. Welding of steam tube to header is required for production of boiler. Heat affected zone of the weld can have poor mechanical properties and poor corrosion behavior leading to weld failure. The cost of material used for steam tube and header of boiler should be controlled. This study propose a new materials design for boiler welding to improve the lifetime and cost control, using tungsten inert gas (TIG) welding of Fe-2.25Cr-1Mo tube to carbon steel pipe with chromium-containing filler. The cost of production could be reduced by the use of low cost material such as carbon steel pipe for boiler header. The effect of chromium content on corrosion behavior of the weld was greater than that of the microstructure. The lifetime of the welded boiler can be increased by improvement of mechanical properties and corrosion behavior of the heat affected zone.

Design of Boiler Welding for Improvement of Lifetime and Cost Control

Directory of Open Access Journals (Sweden)

Atcharawadi Thong-On

2016-11-01

Full Text Available Fe-2.25Cr-1Mo a widely used material for headers and steam tubes of boilers. Welding of steam tube to header is required for production of boiler. Heat affected zone of the weld can have poor mechanical properties and poor corrosion behavior leading to weld failure. The cost of material used for steam tube and header of boiler should be controlled. This study propose a new materials design for boiler welding to improve the lifetime and cost control, using tungsten inert gas (TIG welding of Fe-2.25Cr-1Mo tube to carbon steel pipe with chromium-containing filler. The cost of production could be reduced by the use of low cost material such as carbon steel pipe for boiler header. The effect of chromium content on corrosion behavior of the weld was greater than that of the microstructure. The lifetime of the welded boiler can be increased by improvement of mechanical properties and corrosion behavior of the heat affected zone.

New MEA Materials for Improved DMFC Performance, Durability and Cost

Energy Technology Data Exchange (ETDEWEB)

Fletcher, James H. [University of North Florida; Campbell, Joseph L. [University of North Florida; Cox, Philip [University of North Florida; Harrington, William J. [University of North Florida

2013-09-16

Abstract Project Title: New MEA Materials for Improved DMFC Performance, Durability and Cost The University of North Florida (UNF)--with project partners the University of Florida, Northeastern University, and Johnson Matthey--has recently completed the Department of Energy (DOE) project entitled “New MEA Materials for Improved DMFC Performance, Durability and Cost”. The primary objective of the project was to advance portable fuel cell MEA technology towards the commercial targets as laid out in the DOE R&D roadmap by developing a passive water recovery MEA (membrane electrode assembly). Developers at the University of North Florida identified water management components as an insurmountable barrier to achieving the required system size and weight necessary to achieve the energy density requirements of small portable power applications. UNF developed an innovative “passive water recovery” MEA for direct methanol fuel cells (DMFC) which provides a path to system simplification and optimization. The passive water recovery MEA incorporates a hydrophobic, porous, barrier layer within the cathode electrode, so that capillary pressure forces the water produced at the cathode through holes in the membrane and back to the anode. By directly transferring the water from the cathode to the anode, the balance of plant is very much simplified and the need for heavy, bulky water recovery components is eliminated. At the heart of the passive water recovery MEA is the UNF DM-1 membrane that utilizes a hydrocarbon structure to optimize performance in a DMFC system. The membrane has inherent performance advantages, such as a low methanol crossover (high overall efficiency), while maintaining a high proton conductivity (good electrochemical efficiency) when compared to perfluorinated sulfonic acid membranes such as Nafion. Critically, the membrane provides an extremely low electro-osmotic drag coefficient of approximately one water molecule per proton (versus the 2-3 for

Numeracy: Open-Access Publishing to Reduce the Cost of Scholarly Journals

Directory of Open Access Journals (Sweden)

Todd Chavez

2010-01-01

Full Text Available Each fiscal year, as academic librarians throughout the United States prepare materials budgets, a national “groan” ensues. Regardless of their format (i.e. print or digital, serial subscription costs are escalating, in the process impacting the role of the library in advancing scholarly communication . This paper examines some of the economic issues concerning open-access (OA journal publishing. The importance of quantitative literacy is suggested for librarians and academics seeking a better understanding of alternatives to traditional journal subscription models and to anyone considering ventures into OA publishing. Quantitative literacy is essential for managing alternatives to the rising cost of scholarly communication.The OA movement is gaining traction at the national level, following mandates from the National Institutes of Health and at some large research universities that host institutional repositories. Science faculty has been engaged in scholarly communication OA models since the 1970s. More broadly, discussions in academe have focused on OA and its impact on peer review, promotion and tenure, intellectual property rights, and measures of institutional and faculty productivity. Studies concerning the OA movement’s economics are most commonly reported in academic librarianship literature, a trend that may serve as a barrier to a broader understanding of OA’s role in scholarly communication. This paper provides background information on the crisis in serials costs and suggests that metrics favor OA models publishing models. A concluding proposal concerning library-funded OA serial collections is offered as a catalyst for further discussions.

Cost of radon-barrier systems for uranium mill tailings

International Nuclear Information System (INIS)

Baker, E.G.; Hartley, J.N.

1982-08-01

This report deals specifically with the cost of three types of radon barrier systems, earthen covers, asphalt emulsion covers, and multilayer covers, which could meet standards proposed by the Environmental Protection Agency to stabilize uranium mill tailings located primarily in the western US. In addition, the report includes a sensitivity analysis of various factors which significantly effect the overall cost of the three systems. These analyses were based on a generic disposal site. Four different 3m thick earthen covers were tested and cost an average of $27/m 2 . The least expensive earthen cover cost was about $21/m 2 . The asphalt cover system (6 to 7 cm of asphalt topped with 0.6m of overburden) cost about $28/m 2 . The four multilayer covers averaged $57/m 2 , but materials handling problems encountered during the test inflated this cost above what was anticipated and significant cost reductions should be possible. The least expensive multilayer cover cost $43/m 2 . Based on the results of the Grand Junction field test we estimated the cost of covering the tailings from three high priority sites, Durango, Shiprock, and Salt Lake City (Vitro). The cost of a 3m earthen cover ranged from $18 to 33/m 2 for the seven disposal sites (two or three at each location) studied. The cost of asphalt cover systems were $23 to 28/m 2 and the multilayer cover costs were between $31 to 36/m 2 . The earthen cover costs are less than the Grand Junction field test cost primarily because cover material is available at or near most of the disposal sites selected. Earthen material was imported from 6 to 10 miles for the field test. Assuming more efficienct utilization of materials significantly reduced the cost of the multilayer covers

Timely Referral to Outpatient Nephrology Care Slows Progression and Reduces Treatment Costs of Chronic Kidney Diseases

Directory of Open Access Journals (Sweden)

Gerhard Lonnemann

2017-03-01

Discussion: Timely referral to outpatient nephrology care is associated with slowed disease progression, less hospital admissions, reduced total treatment costs, and improved survival in patients with CKD.

Effectiveness and cost of failure mode and effects analysis methodology to reduce neurosurgical site infections.

Science.gov (United States)

Hover, Alexander R; Sistrunk, William W; Cavagnol, Robert M; Scarrow, Alan; Finley, Phillip J; Kroencke, Audrey D; Walker, Judith L

2014-01-01

Mercy Hospital Springfield is a tertiary care facility with 32 000 discharges and 15 000 inpatient surgeries in 2011. From June 2009 through January 2011, a stable inpatient elective neurosurgery infection rate of 2.15% was observed. The failure mode and effects analysis (FMEA) methodology to reduce inpatient neurosurgery infections was utilized. Following FMEA implementation, overall elective neurosurgery infection rates were reduced to 1.51% and sustained through May 2012. Compared with baseline, the post-FMEA deep-space and organ infection rate was reduced by 41% (P = .052). Overall hospital inpatient clean surgery infection rates for the same time frame did not decrease to the same extent, suggesting a specific effect of the FMEA. The study team believes that the FMEA interventions resulted in 14 fewer expected infections, $270 270 in savings, a 168-day reduction in expected length of stay, and 22 fewer readmissions. Given the serious morbidity and cost of health care-associated infections, the study team concludes that FMEA implementation was clinically cost-effective. © 2013 by the American College of Medical Quality.

Assessing the cost saving potential of shared product architectures

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Hansen, Christian Lindschou; Løkkegaard, Martin

2016-01-01

company. Experiences from the case company show it is possible to reduce the number of architectures with 60% which leads to significant reduction in direct material and labor costs. This can be achieved without compromising the market offerings of products. Experiences from the case study indicate cost......This article presents a method for calculating cost savings of shared architectures in industrial companies called Architecture Mapping and Evaluation. The main contribution is an operational method to evaluate the cost potential and evaluate the number of product architectures in an industrial...

Wire EDM for Refractory Materials

Science.gov (United States)

Zellars, G. R.; Harris, F. E.; Lowell, C. E.; Pollman, W. M.; Rys, V. J.; Wills, R. J.

1982-01-01

In an attempt to reduce fabrication time and costs, Wire Electrical Discharge Machine (Wire EDM) method was investigated as tool for fabricating matched blade roots and disk slots. Eight high-strength nickel-base superalloys were used. Computer-controlled Wire EDM technique provided high quality surfaces with excellent dimensional tolerances. Wire EDM method offers potential for substantial reductions in fabrication costs for "hard to machine" alloys and electrically conductive materials in specific high-precision applications.

Conference on raw materials and jobs cost variation - Impact on wind turbine manufacturers and operators

International Nuclear Information System (INIS)

Chabot, Bernard; Falk, Thorsten; Braeuninger, Michael; Rehfeldt, Knud; Brand, Ruth; Buhr, Ingo de; Jenne, Markus

2007-01-01

In the framework of the 2007 Husum Wind exhibition, the French-German office for Renewable energies (OFAEnR) organised a side event on In the framework of this French-German exchange of experience, participants exchanged views on raw materials and jobs cost variations in the wind power industry in both countries. Its aim was to compare and analyse the French and German respective support systems to renewable energy sources. This document brings together the available presentations (slides) made during this event: 1 - Protecting wind energy tariffs against inflation effects: analysis and suggestions from the French experience (Bernard Chabot); 2 - Wind energy in Germany - Tariff structure in the EEG renewable energy law (Thorsten Falk); 3 - Wind energy competitiveness (Michael Braeuninge, Knud Rehfeldt); 4 - Influence of raw materials price rise on the production costs of ENERCON wind turbines maker (Ruth Brand); 5 - Presentation of the overall costs of an offshore wind energy project (Ingo de Buhr); 6 - Comparison between French and German tariffs profitability using a model wind farm: presentation of the pros and cons of both systems (Markus Jenne)

Paying our way: thinking strategically to offset the cost of reducing fire hazard in western forests.

Science.gov (United States)

Rhonda Mazza

2008-01-01

The fire hazard in many western forests is unacceptably high, posing risks to human health and property, wildlife habitat, and air and water quality. Cost is an inhibiting factor for reducing hazardous fuel, given the amount of acreage needing treatment. Thinning overly dense forests is one way to reduce fuel loads. Much of the product removed during these treatments...

Can automation in radiotherapy reduce costs?

Science.gov (United States)

Massaccesi, Mariangela; Corti, Michele; Azario, Luigi; Balducci, Mario; Ferro, Milena; Mantini, Giovanna; Mattiucci, Gian Carlo; Valentini, Vincenzo

2015-01-01

Computerized automation is likely to play an increasingly important role in radiotherapy. The objective of this study was to report the results of the first part of a program to implement a model for economical evaluation based on micro-costing method. To test the efficacy of the model, the financial impact of the introduction of an automation tool was estimated. A single- and multi-center validation of the model by a prospective collection of data is planned as the second step of the program. The model was implemented by using an interactive spreadsheet (Microsoft Excel, 2010). The variables to be included were identified across three components: productivity, staff, and equipment. To calculate staff requirements, the workflow of Gemelli ART center was mapped out and relevant workload measures were defined. Profit and loss, productivity and staffing were identified as significant outcomes. Results were presented in terms of earnings before interest and taxes (EBIT). Three different scenarios were hypothesized: baseline situation at Gemelli ART (scenario 1); reduction by 2 minutes of the average duration of treatment fractions (scenario 2); and increased incidence of advanced treatment modalities (scenario 3). By using the model, predicted EBIT values for each scenario were calculated across a period of eight years (from 2015 to 2022). For both scenarios 2 and 3 costs are expected to slightly increase as compared to baseline situation that is particularly due to a little increase in clinical personnel costs. However, in both cases EBIT values are more favorable than baseline situation (EBIT values: scenario 1, 27%, scenario 2, 30%, scenario 3, 28% of revenues). A model based on a micro-costing method was able to estimate the financial consequences of the introduction of an automation tool in our radiotherapy department. A prospective collection of data at Gemelli ART and in a consortium of centers is currently under way to prospectively validate the model.

How to reduce your fire insurance rates

Science.gov (United States)

Dubain, M.

1971-01-01

Construction procedures and utilization of materials to reduce the cost of insuring large buildings against losses from fire are discussed. Examples of good and bad techniques in building construction and fire safety management are provided. The inadequacies of building codes and the hazards resulting from improper construction are examined.

Impact of proposed financial assurance requirements on nuclear materials licensees

International Nuclear Information System (INIS)

Hendrickson, P.L.; Scott, M.J.; Mullen, M.F.; Nicholls, A.K.; Smith, S.A.

1987-09-01

The NRC is considering a possible rulemaking that would require certain nuclear materials licensees to demonstrate financial ability to clean up accidental releases of radioactive materials. The rulemaking would potentially affect approximately 16,350 NRC and Agreement State licensees. This report was prepared for NRC by the Pacific Northwest Laboratory to provide background information and analysis for the potential rulemaking. Specific topics examined in the report include: (1) characteristics of potentially affected licensees, (2) the availability and cost of various financial assurance mechanisms, (3) the financial impacts for licensees (including licensees classified as small businesses) of providing $2M of assurance per licensee and a sliding amount of assurance tied to risk, (4) the cost of administering a financial assurance rule, and (5) overall benefits and costs. Tabular information on past material licensee accidents and cleanup efforts is also included. The financial occurrence mechanism that appears to be most suitable for providing the desired financial assurance is one or more newly formed captive insurance companies. Potential benefits of the rulemaking include reduced need for taxpayer-funded cleanup of accidental releases, reduces administrative time to secure such funds, and the possibility of more cleanup with correspondingly reduced occupational and public exposure to radioactive materials

Innovative High-Performance Deposition Technology for Low-Cost Manufacturing of OLED Lighting

Energy Technology Data Exchange (ETDEWEB)

Scott, David; Hamer, John

2017-06-30

In this project, OLEDWorks developed and demonstrated the innovative high-performance deposition technology required to deliver dramatic reductions in the cost of manufacturing OLED lighting in production equipment. The current high manufacturing cost of OLED lighting is the most urgent barrier to its market acceptance. The new deposition technology delivers solutions to the two largest parts of the manufacturing cost problem – the expense per area of good product for organic materials and for the capital cost and depreciation of the equipment. Organic materials cost is the largest expense item in the bill of materials and is predicted to remain so through 2020. The high-performance deposition technology developed in this project, also known as the next generation source (NGS), increases material usage efficiency from 25% found in current Gen2 deposition technology to 60%. This improvement alone results in a reduction of approximately $25/m2 of good product in organic materials costs, independent of production volumes. Additionally, this innovative deposition technology reduces the total depreciation cost from the estimated value of approximately $780/m2 of good product for state-of-the-art G2 lines (at capacity, 5-year straight line depreciation) to $170/m2 of good product from the OLEDWorks production line.

MULCHES AND OTHER COVER MATERIALS TO REDUCE WEED GROWTH IN CONTAINER-GROWN NURSERY STOCK.

Science.gov (United States)

Rys, F; Van Wesemael, D; Van Haecke, D; Mechant, E; Gobin, B

2014-01-01

Due to the recent EU-wide implementation of Integrated Pest Management (IPM), alternative methods to reduce weed growth in container-grown nursery stock are needed to cut back the use of herbicides. Covering the upper layer of the substrate is known as a potential method to prevent or reduce weed growth in plant containers. As a high variety of mulches and other cover materials are on the market, however, it is no longer clear for growers which cover material is most efficient for use in containers. Therefore, we examined the effect on weed growth of different mulches and other cover materials, including Pinus maritima, P. sylvestris, Bio-Top Basic, Bio-Top Excellent, coco chips fine, hemp fibres, straw pellets, coco disk 180LD and jute disk. Cover materials were applied immediately after repotting of Ligustrum ovalifolium or planting of Fagus sylvatica. At regular times, both weed growth and side effects (e.g., plant growth, water status of the substrate, occurrence of mushrooms, foraging of birds, complete cover of the substrate and fixation) were assessed. All examined mulches or other cover materials were able to reduce weed growth on the containers during the whole growing season. Weed suppression was even better than that of a chemical treated control. Although all materials showed some side effects, the impact on plant growth is most important to the grower and depends not only on material characteristics (e.g., biodegradation, nutrient leaching and N-immobilisation) but also on container size and climatic conditions. In conclusion, mulches and other cover materials can be a valuable tool within IPM to lower herbicide use. To enable a deliberate choice of which cover material is best used in a specific situation more research is needed on lifespan and stability as well as on economic characteristics of the materials.

The operating cost of electrocoagulation

Energy Technology Data Exchange (ETDEWEB)

Donini, J.C.; Kan, J.; Szynkarczuk, J.; Hassan, T.A.; Kar, K.L. (Canadian Centre for Mineral and Energy Technology, Devon, AB (Canada))

1994-12-01

The electrocoagulation of kaolinite and bentonite suspensions was studied in a pilot-scale electrocoagulation system to assess the operating cost and efficiency of the process. Factors affecting the operating cost such as formation of passivation layers on electrode plates, flow velocity, and concentration of NaCl in the suspension were examined. The operating costs investigated were the power cost of the electrocoagulation cell and the material cost due to the consumption of the aluminum electrode. Comparison was based on the settling properties of the treated product: turbidity, settling rate, and cake height. Higher NaCl concentration resulted in greater amounts of Al dissolved chemically and electrochemically into the suspension and thus a better clarity of the supernatant of the treated product. Increased flow velocity could reduce significantly the operating cost while improving both clarity of the supernatant and compactness of the sludge volume. The passivation layers developed quickly with time during the electrocoagulation process and more energy became wasted on the layers. 10 refs., 12 figs.

Transformational Electronics: Towards Flexible Low-Cost High Mobility Channel Materials

KAUST Repository

Nassar, Joanna M.

2014-05-01

For the last four decades, Si CMOS technology has been advancing with Moore’s law prediction, working itself down to the sub-20 nm regime. However, fundamental problems and limitations arise with the down-scaling of transistors and thus new innovations needed to be discovered in order to further improve device performance without compromising power consumption and size. Thus, a lot of studies have focused on the development of new CMOS compatible architectures as well as the discovery of new high mobility channel materials that will allow further miniaturization of CMOS transistors and improvement of device performance. Pushing the limits even further, flexible and foldable electronics seem to be the new attractive topic. By being able to make our devices flexible through a CMOS compatible process, one will be able to integrate hundreds of billions of more transistors in a small volumetric space, allowing to increase the performance and speed of our electronics all together with making things thinner, lighter, smaller and even interactive with the human skin. Thus, in this thesis, we introduce for the first time a cost-effective CMOS compatible approach to make high-k/metal gate devices on flexible Germanium (Ge) and Silicon-Germanium (SiGe) platforms. In the first part, we will look at the various approaches in the literature that has been developed to get flexible platforms, as well as we will give a brief overview about epitaxial growth of Si1-xGex films. We will also examine the electrical properties of the Si1-xGex alloys up to Ge (x=1) and discuss how strain affects the band structure diagram, and thus the mobility of the material. We will also review the material growth properties as well as the state-of-the-art results on high mobility metal-oxide semiconductor capacitors (MOSCAPs) using strained SiGe films. Then, we will introduce the flexible process that we have developed, based on a cost-effective “trench-protect-release-reuse” approach, utilizing

Cost Effective Community Based Dementia Screening: A Markov Model Simulation

Directory of Open Access Journals (Sweden)

Erin Saito

2014-01-01

Full Text Available Background. Given the dementia epidemic and the increasing cost of healthcare, there is a need to assess the economic benefit of community based dementia screening programs. Materials and Methods. Markov model simulations were generated using data obtained from a community based dementia screening program over a one-year period. The models simulated yearly costs of caring for patients based on clinical transitions beginning in pre dementia and extending for 10 years. Results. A total of 93 individuals (74 female, 19 male were screened for dementia and 12 meeting clinical criteria for either mild cognitive impairment (n=7 or dementia (n=5 were identified. Assuming early therapeutic intervention beginning during the year of dementia detection, Markov model simulations demonstrated 9.8% reduction in cost of dementia care over a ten-year simulation period, primarily through increased duration in mild stages and reduced time in more costly moderate and severe stages. Discussion. Community based dementia screening can reduce healthcare costs associated with caring for demented individuals through earlier detection and treatment, resulting in proportionately reduced time in more costly advanced stages.

Listing the investment costs and producing material analyses for given plants for energy supply

International Nuclear Information System (INIS)

Wagner, H.J.; Hansen, K.; Schoen, R.; Wassmann, B.

1989-01-01

In this comparison, the investment and material cost for the following plants are examined: 1. Solar service water treatment plants, 2. Solar heating plants, 3. Conventional comparative plants, 4. Heat pump heating plants, 5. Nuclear power stations and hardcoal-fired power stations, and 6. Wind energy converters. The technique of energy conversion of each is generally explained. In the appendix, points of the use of energy are given for the manufacture of components of the heating and installation trade. Specific energy costs per product unit are compiled for the different branches. (UA) [de

The effects of fabric type, fabric width and model type on the cost of unit raw material in terms of apparel

Science.gov (United States)

Bilgiç, H.; Duru Baykal, P.

2017-10-01

The cost of the fabric which is the raw material of apparel constitutes approximately the half of the total product cost. So, it is highly important that the fabric should be used with the greatest productivity. Cost analysis are of great importance in terms of competitiveness of readymade clothing and apparel sector both in national and international markets. The proximity of costs to international average and the average cost of the countries that are competitors of Turkey in clothing market is essential for Turkey to sustain its effect in textile sector. In the contrary case, the sector won’t be able to maintain its competitive capacity sustainably [1].The main cost elements of textile and apparel sector consist of raw material, labor, energy and financing [2].

GREEN CONCEPTS AND MATERIAL FLOW COST ACCOUNTING APPLICATION FOR COMPANY SUSTAINABILITY

Directory of Open Access Journals (Sweden)

Rochman Marota

2017-02-01

Full Text Available Health equipment and furniture become a complementary factor for good health services to the communities. Management of health equipment and furniture is started by manufacturers within the industry scope and sustainable business processes. This study aimed to apply green concepts and MFCA at PT XYZ, and to analyze their effects on the dimensions of the company sustainability. To measure the effects of green concepts and MFCA on the dimensions of corporate sustainability, a multiple regression analysis was used. The analysis showed that they gave significant effects from the results of the F test, t test and probability test. From these results, a number of suggestions for improvement of production process performance as managerial implications for maintaining the stability of the company sustainability index were formulated.Keywords: efficiency and effectiveness of production cost, green concepts, the company sustainability, material flow cost accounting

Experimental analysis of a low cost phase change material emulsion for its use as thermal storage system

International Nuclear Information System (INIS)

Delgado, Mónica; Lázaro, Ana; Mazo, Javier; Peñalosa, Conchita; Dolado, Pablo; Zalba, Belén

2015-01-01

Highlights: • A low cost PCM emulsion has been analyzed as thermal energy storage system. • Its thermophysical and rheological properties have been determined. • The system shows advantages in terms of energy density and heat transfer rate. • The PCM emulsion system has been compared to other thermal energy storage systems. - Abstract: A 46 l commercial tank with a helical coil heat exchanger and containing a low cost phase change material emulsion has been experimentally analyzed as a thermal energy storage system in terms of volumetric energy density and heat transfer rate, for its subsequent comparison with other thermal energy storage systems. This phase change material emulsion shows a phase change temperature range between 30 and 50 °C, its solids content is about 60% with an average particle size of 1 μm. The low cost phase change material emulsion shows a thermal storage capacity by mass 50% higher than water and an increase in viscosity up to 2–5 orders of magnitude. The results have shown that the global heat transfer coefficient of the phase change material emulsion tank is around 2–6 times higher than for conventional latent systems previously analyzed in literature, although 5 times lower than if it contains water. The phase change material emulsion tank presents an energy density 34% higher than the water tank, which makes it a promising solution. Measures to improve its performance are also studied in this work.

Cost-effectiveness of sacubitril/valsartan in chronic heart-failure patients with reduced ejection fraction.

Science.gov (United States)

Ademi, Zanfina; Pfeil, Alena M; Hancock, Elizabeth; Trueman, David; Haroun, Rola Haroun; Deschaseaux, Celine; Schwenkglenks, Matthias

2017-11-29

We aimed to assess the cost effectiveness of sacubitril/valsartan compared to angiotensin-converting enzyme inhibitors (ACEIs) for the treatment of individuals with chronic heart failure and reduced-ejection fraction (HFrEF) from the perspective of the Swiss health care system. The cost-effectiveness analysis was implemented as a lifelong regression-based cohort model. We compared sacubitril/valsartan with enalapril in chronic heart failure patients with HFrEF and New York-Heart Association Functional Classification II-IV symptoms. Regression models based on the randomised clinical phase III PARADIGM-HF trials were used to predict events (all-cause mortality, hospitalisations, adverse events and quality of life) for each treatment strategy modelled over the lifetime horizon, with adjustments for patient characteristics. Unit costs were obtained from Swiss public sources for the year 2014, and costs and effects were discounted by 3%. The main outcome of interest was the incremental cost-effectiveness ratio (ICER), expressed as cost per quality-adjusted life years (QALYs) gained. Deterministic sensitivity analysis (DSA) and scenario and probabilistic sensitivity analysis (PSA) were performed. In the base-case analysis, the sacubitril/valsartan strategy showed a decrease in the number of hospitalisations (6.0% per year absolute reduction) and lifetime hospital costs by 8.0% (discounted) when compared with enalapril. Sacubitril/valsartan was predicted to improve overall and quality-adjusted survival by 0.50 years and 0.42 QALYs, respectively. Additional net-total costs were CHF 10 926. This led to an ICER of CHF 25 684. In PSA, the probability of sacubitril/valsartan being cost-effective at thresholds of CHF 50 000 was 99.0%. The treatment of HFrEF patients with sacubitril/valsartan versus enalapril is cost effective, if a willingness-to-pay threshold of CHF 50 000 per QALY gained ratio is assumed.

Flexible screen printed thick film thermoelectric generator with reduced material resistivity

International Nuclear Information System (INIS)

Cao, Z; Koukharenko, E; Torah, R N; Tudor, J; Beeby, S P

2014-01-01

This work presents a flexible thick-film Bismuth Tellurium/Antimony Tellurium (BiTe/SbTe) thermoelectric generator (TEG) with reduced material resistivity fabricated by screen printing technology. Cold isostatic pressing (CIP) was introduced to lower the resistivity of the printed thermoelectric materials. The Seebeck coefficient (α) and the resistivity (ρ) of printed materials were measured as a function of applied pressure. A prototype TEG with 8 thermocouples was fabricated on flexible polyimide substrate. The dimension of a single printed element was 20 mm × 2 mm × 78.4 pm. The coiled-up prototype produced a voltage of 36.4 mV and a maximum power of 40.3 nW from a temperature gradient of 20 °C

Reduced-activation materials for fusion reactors: An overview of the proceedings

International Nuclear Information System (INIS)

Klueh, R.L.; Packan, N.H.; Gelles, D.S.; Okada, M.

1988-01-01

Some of the most serious safety and environmental concerns for future fusion reactors involve induced radioactivity in the first wall and blanket structures. One problem caused by the induced radioactivity in a reactor constructed from the conventional austenitic and ferritic steels presently being considered as structural materials would be the disposal of the highly radioactive structures after their service lifetimes. To simplify the waste-disposal process, ''low-activation'' or ''reduced-activation'' alloys are being developed. The objective for such materials is that they qualify for shallow land burial, as opposed to the much more expensive deep geologic disposal. This paper reviews these classes of materials for this purpose: austenitic stainless steels, ferritic steels, and vanadium alloys

Autonomous exoskeleton reduces metabolic cost of human walking during load carriage

Science.gov (United States)

2014-01-01

Background Many soldiers are expected to carry heavy loads over extended distances, often resulting in physical and mental fatigue. In this study, the design and testing of an autonomous leg exoskeleton is presented. The aim of the device is to reduce the energetic cost of loaded walking. In addition, we present the Augmentation Factor, a general framework of exoskeletal performance that unifies our results with the varying abilities of previously developed exoskeletons. Methods We developed an autonomous battery powered exoskeleton that is capable of providing substantial levels of positive mechanical power to the ankle during the push-off region of stance phase. We measured the metabolic energy consumption of seven subjects walking on a level treadmill at 1.5 m/s, while wearing a 23 kg vest. Results During the push-off portion of the stance phase, the exoskeleton applied positive mechanical power with an average across the gait cycle equal to 23 ± 2 W (11.5 W per ankle). Use of the autonomous leg exoskeleton significantly reduced the metabolic cost of walking by 36 ± 12 W, which was an improvement of 8 ± 3% (p = 0.025) relative to the control condition of not wearing the exoskeleton. Conclusions In the design of leg exoskeletons, the results of this study highlight the importance of minimizing exoskeletal power dissipation and added limb mass, while providing substantial positive power during the walking gait cycle. PMID:24885527

Application of the US decision support tool for materials and waste management

International Nuclear Information System (INIS)

Thorneloe, Susan A.; Weitz, Keith; Jambeck, Jenna

2007-01-01

The US Environmental Protection Agency (US EPA) launched the Resource Conservation Challenge (RCC) in 2002 to help reduce waste and move towards more sustainable resource consumption. The objective of the RCC is to help communities, industries, and the public think in terms of materials management rather than waste disposal. Reducing cost, finding more efficient and effective strategies to manage municipal waste, and thinking in terms of materials management requires a holistic approach that considers life-cycle environmental tradeoffs. The US EPA's National Risk Management Research Laboratory has led the development of a municipal solid waste decision support tool (MSW-DST). The computer software can be used to calculate life-cycle environmental tradeoffs and full costs of different waste management or materials recovery programs. The environmental methodology is based on the use of life-cycle assessment and the cost methodology is based on the use of full-cost accounting. Life-cycle inventory (LCI) environmental impacts and costs are calculated from the point of collection, handling, transport, treatment, and disposal. For any materials that are recovered for recycling, offsets are calculated to reflect potential emissions savings from use of virgin materials. The use of the MSW-DST provides a standardized format and consistent basis to compare alternatives. This paper provides an illustration of how the MSW-DST can be used by evaluating ten management strategies for a hypothetical medium-sized community to compare the life-cycle environmental and cost tradeoffs. The LCI results from the MSW-DST are then used as inputs into another US EPA tool, the Tool for the reduction and assessment of chemical and other environmental impacts, to convert the LCI results into impact indicators. The goal of this paper is to demonstrate how the MSW-DST can be used to identify and balance multiple criteria (costs and environmental impacts) when evaluating options for materials and

Cost-effectiveness analysis of salt reduction policies to reduce coronary heart disease in Syria, 2010-2020.

Science.gov (United States)

Wilcox, Meredith L; Mason, Helen; Fouad, Fouad M; Rastam, Samer; al Ali, Radwan; Page, Timothy F; Capewell, Simon; O'Flaherty, Martin; Maziak, Wasim

2015-01-01

This study presents a cost-effectiveness analysis of salt reduction policies to lower coronary heart disease in Syria. Costs and benefits of a health promotion campaign about salt reduction (HP); labeling of salt content on packaged foods (L); reformulation of salt content within packaged foods (R); and combinations of the three were estimated over a 10-year time frame. Policies were deemed cost-effective if their cost-effectiveness ratios were below the region's established threshold of $38,997 purchasing power parity (PPP). Sensitivity analysis was conducted to account for the uncertainty in the reduction of salt intake. HP, L, and R+HP+L were cost-saving using the best estimates. The remaining policies were cost-effective (CERs: R=$5,453 PPP/LYG; R+HP=$2,201 PPP/LYG; R+L=$2,125 PPP/LYG). R+HP+L provided the largest benefit with net savings using the best and maximum estimates, while R+L was cost-effective with the lowest marginal cost using the minimum estimates. This study demonstrated that all policies were cost-saving or cost effective, with the combination of reformulation plus labeling and a comprehensive policy involving all three approaches being the most promising salt reduction strategies to reduce CHD mortality in Syria.

Technology for low cost solid rocket boosters.

Science.gov (United States)

Ciepluch, C.

1971-01-01

A review of low cost large solid rocket motors developed at the Lewis Research Center is given. An estimate is made of the total cost reduction obtainable by incorporating this new technology package into the rocket motor design. The propellant, case material, insulation, nozzle ablatives, and thrust vector control are discussed. The effect of the new technology on motor cost is calculated for a typical expandable 260-in. booster application. Included in the cost analysis is the influence of motor performance variations due to specific impulse and weight changes. It is found for this application that motor costs may be reduced by up to 30% and that the economic attractiveness of future large solid rocket motors will be improved when the new technology is implemented.

Simulation at the point of care: reduced-cost, in situ training via a mobile cart.

Science.gov (United States)

Weinstock, Peter H; Kappus, Liana J; Garden, Alexander; Burns, Jeffrey P

2009-03-01

The rapid growth of simulation in health care has challenged traditional paradigms of hospital-based education and training. Simulation addresses patient safety through deliberative practice of high-risk low-frequency events within a safe, structured environment. Despite its inherent appeal, widespread adoption of simulation is prohibited by high cost, limited space, interruptions to clinical duties, and the inability to replicate important nuances of clinical environments. We therefore sought to develop a reduced-cost low-space mobile cart to provide realistic simulation experiences to a range of providers within the clinical environment and to serve as a model for transportable, cost-effective, widespread simulation-based training of bona-fide workplace teams. Descriptive study. A tertiary care pediatric teaching hospital. A self-contained mobile simulation cart was constructed at a cost of $8054 (mannequin not included). The cart is compatible with any mannequin and contains all equipment needed to produce a high quality simulation experience equivalent to that of our on-site center--including didactics and debriefing with videotaped recordings complete with vital sign overlay. Over a 3-year period the cart delivered 57 courses to 425 participants from five pediatric departments. All individuals were trained among their native teams and within their own clinical environment. By bringing all pedagogical elements to the actual clinical environment, a mobile cart can provide simulation to hospital teams that might not otherwise benefit from the educational tool. By reducing the setup cost and the need for dedicated space, the mobile approach provides a mechanism to increase the number of institutions capable of harnessing the power of simulation-based education internationally.

Uncertainty analysis in raw material and utility cost of biorefinery synthesis and design

DEFF Research Database (Denmark)

Cheali, Peam; Quaglia, Alberto; Gernaey, Krist

2014-01-01

are characterized by considerable uncertainty. These uncertainties might have significant impact on the results of the design problem, and therefore need to be carefully evaluated and managed, in order to generate candidates for robust design. In this contribution, we study the effect of data uncertainty (raw...... material price and utility cost) on the design of a biorefinery process network....

Reducing Length of Stay, Direct Cost, and Readmissions in Total Joint Arthroplasty Patients With an Outcomes Manager-Led Interprofessional Team.

Science.gov (United States)

Arana, Melissa; Harper, Licia; Qin, Huanying; Mabrey, Jay

The purpose of this quality improvement project was to determine whether an outcomes manager-led interprofessional team could reduce length of stay and direct cost without increasing 30-day readmission rates in the total joint arthroplasty patient population. The goal was to promote interprofessional relationships combined with collaborative practice to promote coordinated care with improved outcomes. Results from this project showed that length of stay (total hip arthroplasty [THA] reduced by 0.4 days and total knee arthroplasty [TKA] reduced by 0.6 days) and direct cost (THA reduced by $1,020 per case and TKA reduced by $539 per case) were significantly decreased whereas 30-day readmission rates of both populations were not significantly increased.

The Relative Patient Costs and Availability of Dental Services, Materials and Equipment in Public Oral Care Facilities in Tanzania.

OpenAIRE

Nyamuryekung'e, Kasusu K; Lahti, Satu M; Tuominen, Risto J

2015-01-01

Background Patient charges and availability of dental services influence utilization of dental services. There is little available information on the cost of dental services and availability of materials and equipment in public dental facilities in Africa. This study aimed to determine the relative cost and availability of dental services, materials and equipment in public oral care facilities in Tanzania. The local factors affecting availability were also studied. Methods A survey of all dis...

The role of technology in reducing health care costs. Final project report

Energy Technology Data Exchange (ETDEWEB)

Sill, A.E.; Warren, S.; Dillinger, J.D.; Cloer, B.K.

1997-08-01

Sandia National Laboratories applied a systems approach to identifying innovative biomedical technologies with the potential to reduce U.S. health care delivery costs while maintaining care quality. This study was conducted by implementing both top-down and bottom-up strategies. The top-down approach used prosperity gaming methodology to identify future health care delivery needs. This effort provided roadmaps for the development and integration of technology to meet perceived care delivery requirements. The bottom-up approach identified and ranked interventional therapies employed in existing care delivery systems for a host of health-related conditions. Economic analysis formed the basis for development of care pathway interaction models for two of the most pervasive, chronic disease/disability conditions: coronary artery disease (CAD) and benign prostatic hypertrophy (BPH). Societal cost-benefit relationships based on these analyses were used to evaluate the effect of emerging technology in these treatment areas. 17 figs., 48 tabs.

Parts, Materials, and Processes Control Program for Expendable Launch Vehicles

Science.gov (United States)

2015-05-21

cycle cost ; and 4. Improve procurement and test of small quantities of parts and materials that meet system requirements. This document supersedes...the reliability of program PMP to reduce PMP failures at all levels of assembly and test 3. Reduce program lifecycle cost 4. Improve procurement and...part shall be procured in single lots directly from the manufacturer or its authorized franchised distributor. The contractor shall be able to

Risks, costs and benefits analysis for exhumation of buried radioactive materials at a nuclear fuel fabrication facility

International Nuclear Information System (INIS)

Kirk, J.S.; Moore, R.A.; Huston, T.E.

1996-01-01

A Risks, Costs and Benefits analysis provides a tool for selecting a cost-effective remedial action alternative. This analysis can help avoid transferring risks to other populations and can objectively measure the benefits of a specific remedial action project. This paper describes the methods and results of a Risks, Costs and Benefits analysis performed at a nuclear fuel fabrication facility. The analysis examined exhuming and transporting radioactive waste to an offsite disposal facility. Risks evaluated for the remedial action project were divided into two categories: risks posed to the worker and risks posed to public health. Risks to workers included exposure to radioactive contaminants during excavation and packaging of waste materials and the use of heavy machinery. Potential public health risks included exposure to radioactive materials during transport from the exhumation site to the disposal facility. Methods included use of site-specific and published data, and existing computer models. Occupational risks were quantified using data from similar onsite remedial action projects. Computer modeling was used to evaluate public health risks from transporting radioactive materials; the consequences or probability of traffic accidents; and radiation exposure to potential inhabitants occupying the site considering various land use scenarios. A costs analysis was based on data obtained from similar onsite remedial action projects. Scenarios used to identify benefits resulting from the remedial action project included (1) an evaluation of reduction in risks to human health; (2) cost reductions associated with the unrestricted release of the property; and (3) benefits identified by evaluating regulatory mandates applicable to decommissioning. This paper will provide an overview of the methods used and a discussion of the results of a Risks, Costs and Benefits analysis for a site-specific remedial action scenario

Equipment cost optimization

International Nuclear Information System (INIS)

Ribeiro, E.M.; Farias, M.A.; Dreyer, S.R.B.

1995-01-01

Considering the importance of the cost of material and equipment in the overall cost profile of an oil company, which in the case of Petrobras, represents approximately 23% of the total operational cost or 10% of the sales, an organization for the optimization of such costs has been established within Petrobras. Programs are developed aiming at: optimization of life-cycle cost of material and equipment; optimization of industrial processes costs through material development. This paper describes the methodology used in the management of the development programs and presents some examples of concluded and ongoing programs, which are conducted in permanent cooperation with suppliers, technical laboratories and research institutions and have been showing relevant results

Capital and operating cost estimates for high temperature superconducting magnetic energy storage

International Nuclear Information System (INIS)

Schoenung, S.M.; Meier, W.R.; Fagaly, R.L.; Heiberger, M.; Stephens, R.B.; Leuer, J.A.; Guzman, R.A.

1992-01-01

Capital and operating costs have been estimated for mid-scale (2 to 200 Mwh) superconducting magnetic energy storage (SMES) designed to use high temperature superconductors (HTS). Capital costs are dominated by the cost of superconducting materials. Operating costs, primarily for regeneration, are significantly reduced for HTS-SMES in comparison to low temperature, conventional systems. This cost component is small compared to other O and M and capital components, when levelized annual costs are projected. In this paper, the developments required for HTS-SMES feasibility are discussed

Cost reduction possibilities for a heavy-ion accelerator for inertial confinement fusion

International Nuclear Information System (INIS)

Thayer, G.R.; Sims, J.R.; Henke, M.D.; Harris, D.B.; Dudziak, D.J.; Phillips, N.R.

1987-10-01

A design was produced for a single module in a cost-optimized accelerator appropriate for a commercial heavy-ion power plant. The goal of the study was to determine if the cost of the accelerator module could be reduced through design options, selection of materials, and manufacturing techniques. Independent cost estimates were obtained for the three main components of the module, and cost reductions of 20% from the cost calculated by the heavy-ion accelerator design/cost-minimization computer code LIACEP were identified. 3 refs., 23 figs

The cost-effectiveness of household photovoltaic systems in reducing greenhouse gas emissions in Australia: Linking subsidies with emission reductions

International Nuclear Information System (INIS)

Burtt, D.; Dargusch, P.

2015-01-01

Highlights: • Payback period for Australian household PV fell to four years in 2011 and 2012. • PV became attractive due to high feed-in tariffs and declining PV costs. • Cost was AU$200/t CO 2 e in 2010, expected to be AU$65 to AU$100/t CO 2 e by 2020. • PV resulted in greenhouse gas emissions reducing by 3.7 million t CO 2 e in 2013. • PV expected to reduce greenhouse gas emissions by 8 million t CO 2 e in 2020. - Abstract: This paper examines the cost-effectiveness of subsidies (feed-in tariffs and renewable energy credits) paid for by electricity consumers to support the uptake of roof top photovoltaic (PV) systems by households in Australia. We estimate annual payback periods, and then regress these against the actual uptake of household PV and associated emission reductions, creating a relationship not apparent in other research. Sensitivity analysis reveals that the declining cost of PV panels had most impact on PV uptake followed by feed-in tariffs, renewable energy credits and the increasing cost of household electricity tariffs. Our modelling shows that feed-in tariffs were higher than necessary to achieve the resultant levels of PV uptake and that the low cost of PV panels and comparatively high electricity tariffs are likely to result in a continuing strong uptake of household PV in Australia. Our modelling shows that subsidies peaked in 2011 and 2012, with payback periods of three to four years, having since increased to five to six years. Emission reduction costs are expected to reduce from over AU$200 per t CO 2 e in 2013 to between AU$65 and AU$100 per t CO 2 e in 2020. Household PV reduced Australia’s emissions by 3.7 million t CO 2 e in 2013 (1.7% of Australia’s total emissions) and is expected to reach eight million tonnes (3.7% of Australia’s total emissions) by 2020

Design of lightweight multi-material automotive bodies using new material performance indices of thin-walled beams for the material selection with crashworthiness consideration

International Nuclear Information System (INIS)

Cui, Xintao; Zhang, Hongwei; Wang, Shuxin; Zhang, Lianhong; Ko, Jeonghan

2011-01-01

Currently, automotive bodies are constructed usually using a single material, e.g. steel or aluminum. Compared to single-material automotive bodies, multi-material automotive bodies allow optimal material selection in each structural component for higher product performance and lower cost. This paper presents novel material performance indices and procedures developed to guide systematic material selection for multi-material automotive bodies. These new indices enable to characterize the crashworthiness performance of complex-shaped thin-walled beams in multi-material automotive bodies according to material types. This paper also illustrates the application of these performance indices and procedures by designing a lightweight multi-material automotive body. These procedures will help to design a lightweight and affordable body favored by the automotive industry, thus to reduce fuel consumption and greenhouse gas emissions.

[Cost analysis of intraoperative neurophysiological monitoring (IOM)].

Science.gov (United States)

Kombos, T; Suess, O; Brock, M

2002-01-01

A number of studies demonstrate that a significant reduction of postoperative neurological deficits can be achieved by applying intraoperative neurophysiological monitoring (IOM) methods. A cost analysis of IOM is imperative considering the strained financial situation in the public health services. The calculation model presented here comprises two cost components: material and personnel. The material costs comprise consumer goods and depreciation of capital goods. The computation base was 200 IOM cases per year. Consumer goods were calculated for each IOM procedure respectively. The following constellation served as a basis for calculating personnel costs: (a) a medical technician (salary level BAT Vc) for one hour per case; (b) a resident (BAT IIa) for the entire duration of the measurement, and (c) a senior resident (BAT Ia) only for supervision. An IOM device consisting of an 8-channel preamplifier, an electrical and acoustic stimulator and special software costs 66,467 euros on the average. With an annual depreciation of 20%, the costs are 13,293 euros per year. This amounts to 66.46 euros per case for the capital goods. For reusable materials a sum of 0.75 euro; per case was calculated. Disposable materials were calculate for each procedure respectively. Total costs of 228.02 euro; per case were,s a sum of 0.75 euros per case was calculated. Disposable materials were calculate for each procedure respectively. Total costs of 228.02 euros per case were, calculated for surgery on the peripheral nervous system. They amount to 196.40 euros per case for spinal interventions and to 347.63 euros per case for more complex spinal operations. Operations in the cerebellopontine angle and brain stem cost 376.63 euros and 397.33 euros per case respectively. IOM costs amount to 328.03 euros per case for surgical management of an intracranial aneurysm and to 537.15 euros per case for functional interventions. Expenses run up to 833.63 euros per case for operations near the

Reducing Health Cost: Health Informatics and Knowledge Management as a Business and Communication Tool

Science.gov (United States)

Gyampoh-Vidogah, Regina; Moreton, Robert; Sallah, David

Health informatics has the potential to improve the quality and provision of care while reducing the cost of health care delivery. However, health informatics is often falsely regarded as synonymous with information management (IM). This chapter (i) provides a clear definition and characteristic benefits of health informatics and information management in the context of health care delivery, (ii) identifies and explains the difference between health informatics (HI) and managing knowledge (KM) in relation to informatics business strategy and (iii) elaborates the role of information communication technology (ICT) KM environment. This Chapter further examines how KM can be used to improve health service informatics costs, and identifies the factors that could affect its implementation and explains some of the reasons driving the development of electronic health record systems. This will assist in avoiding higher costs and errors, while promoting the continued industrialisation of KM delivery across health care communities.

MoS2: a two-dimensional hole-transporting material for high-efficiency, low-cost perovskite solar cells

Science.gov (United States)

Kohnehpoushi, Saman; Nazari, Pariya; Abdollahi Nejand, Bahram; Eskandari, Mehdi

2018-05-01

In this work MoS2 thin film was studied as a potential two-dimensional (2D) hole-transporting material for fabrication of low-cost, durable and efficient perovskite solar cells. The thickness of MoS2 was studied as a potential factor in reaching high power conversion efficiency in perovskite solar cells. The thickness of the perovskite layer and the different metal back contacts gave distinct photovoltaic properties to the designed cells. The results show that a single sheet of MoS2 could considerably improve the power conversion efficacy of the device from 10.41% for a hole transport material (HTM)-free device to 20.43% for a device prepared with a 0.67 nm thick MoS2 layer as a HTM. On the back, Ag and Al collected the carriers more efficiently than Au due to the value of their metal contact work function with the TiO2 conduction band. The present work proposes a new architecture for the fabrication of low-cost, durable and efficient perovskite solar cells made from a low-cost and robust inorganic HTM and electron transport material.

Photovoltaic system costs using local labor and materials in developing countries

Science.gov (United States)

Jacobson, E.; Fletcher, G.; Hein, G.

1980-05-01

The use of photovoltaic (PV) technology in countries that do not presently have high technology industrial capacity was investigated. The relative cost of integrating indigenous labor (and manufacturing where available) into the balance of the system industry of seven countries (Egypt, Haiti, the Ivory Coast, Kenya, Mexico, Nepal, and the Phillipines) was determined. The results were then generalized to other countries, at most levels of development. The results of the study imply several conclusions: (1) the cost of installing and maintaining comparable photovoltaic systems in developing countries is less than in the United States; (2) skills and some materials are available in the seven subject countries that may be applied to constructing and maintaining PV systems; (3) there is an interest in foreign countries in photovoltaics; and (4) conversations with foreign nationals suggest that photovoltaics must be introduced in foreign markets as an appropriate technology with high technology components rather than as a high technology system.

The relative patient costs and availability of dental services, materials and equipment in public oral care facilities in Tanzania.

Science.gov (United States)

Nyamuryekung'e, Kasusu K; Lahti, Satu M; Tuominen, Risto J

2015-07-01

Patient charges and availability of dental services influence utilization of dental services. There is little available information on the cost of dental services and availability of materials and equipment in public dental facilities in Africa. This study aimed to determine the relative cost and availability of dental services, materials and equipment in public oral care facilities in Tanzania. The local factors affecting availability were also studied. A survey of all district and regional dental clinics in selected regions was conducted in 2014. A total of 28/30 facilities participated in the study. A structured interview was undertaken amongst practitioners and clinic managers within the facilities. Daily resources for consumption (DRC) were used for estimation of patients' relative cost. DRC are the quantified average financial resources required for an adult Tanzanian's overall consumption per day. Tooth extractions were found to cost four times the DRC whereas restorations were 9-10 times the DRC. Studied facilities provided tooth extractions (100%), scaling (86%), fillings (79%), root canal treatment (46%) and fabrication of removable partial dentures (32%). The ratio of tooth fillings to extractions in the facilities was 1:16. Less than 50% of the facilities had any of the investigated dental materials consistently available throughout the year, and just three facilities had all the investigated equipment functional and in use. Dental materials and equipment availability, skills of the practitioners and the cost of services all play major roles in provision and utilization of comprehensive oral care. These factors are likely to be interlinked and should be taken into consideration when studying any of the factors individually.

Reducing metal alloy powder costs for use in powder bed fusion additive manufacturing: Improving the economics for production

Science.gov (United States)

Medina, Fransisco

Titanium and its associated alloys have been used in industry for over 50 years and have become more popular in the recent decades. Titanium has been most successful in areas where the high strength to weight ratio provides an advantage over aluminum and steels. Other advantages of titanium include biocompatibility and corrosion resistance. Electron Beam Melting (EBM) is an additive manufacturing (AM) technology that has been successfully applied in the manufacturing of titanium components for the aerospace and medical industry with equivalent or better mechanical properties as parts fabricated via more traditional casting and machining methods. As the demand for titanium powder continues to increase, the price also increases. Titanium spheroidized powder from different vendors has a price range from 260/kg-450/kg, other spheroidized alloys such as Niobium can cost as high as $1,200/kg. Alternative titanium powders produced from methods such as the Titanium Hydride-Dehydride (HDH) process and the Armstrong Commercially Pure Titanium (CPTi) process can be fabricated at a fraction of the cost of powders fabricated via gas atomization. The alternative powders can be spheroidized and blended. Current sectors in additive manufacturing such as the medical industry are concerned that there will not be enough spherical powder for production and are seeking other powder options. It is believed the EBM technology can use a blend of spherical and angular powder to build fully dense parts with equal mechanical properties to those produced using traditional powders. Some of the challenges with angular and irregular powders are overcoming the poor flow characteristics and the attainment of the same or better packing densities as spherical powders. The goal of this research is to demonstrate the feasibility of utilizing alternative and lower cost powders in the EBM process. As a result, reducing the cost of the raw material to reduce the overall cost of the product produced with

Profiling stainless steel welding processes to reduce fume emissions, hexavalent chromium emissions and operating costs in the workplace.

Science.gov (United States)

Keane, Michael; Siert, Arlen; Stone, Samuel; Chen, Bean T

2016-01-01

Nine gas metal arc welding (GMAW) processes for stainless steel were assessed for fume generation rates, fume generation rates per g of electrode consumed, and emission rates for hexavalent chromium (Cr(6+)). Elemental manganese, nickel, chromium, iron emissions per unit length of weld, and labor plus consumables costs were similarly measured. Flux-cored arc welding and shielded metal arc (SMAW) processes were also studied. The objective was to identify the best welding processes for reducing workplace exposures, and estimate costs for all processes. Using a conical chamber, fumes were collected, weighed, recovered, and analyzed by inductively coupled atomic emission spectroscopy for metals, and by ion chromatography for Cr(6+). GMAW processes used were Surface Tension Transfer, Regulated Metal Deposition, Cold Metal Transfer, short-circuit, axial spray, and pulsed spray modes. Flux-cored welding used gas shielding; SMAW used E308 rods. Costs were estimated as dollars per m length of a ¼ in (6.3 mm) thick horizontal butt weld; equipment costs were estimated as ratios of new equipment costs to a 250 ampere capacity SMAW welding machine. Results indicate a broad range of fume emission factors for the processes studied. Fume emission rates per g of electrode were lowest for GMAW processes such as pulsed-spray mode (0.2 mg/g), and highest for SMAW (8 mg fume/g electrode). Emission rates of Cr(6+) ranged from 50-7800 µg/min, and Cr(6+) generation rates per g electrode ranged from 1-270 µg/g. Elemental Cr generation rates spanned 13-330 µg/g. Manganese emission rates ranged from 50-300 µg/g. Nickel emission rates ranged from 4-140 µg/g. Labor and consumables costs ranged from $3.15 (GMAW pulsed spray) to $7.40 (SMAW) per meter of finished weld, and were measured or estimated for all 11 processes tested. Equipment costs for some processes may be as much as five times the cost of a typical SMAW welding machine. The results show that all of the GMAW processes in this

Alternative Strategies to Reduce Maternal Mortality in India: A Cost-Effectiveness Analysis

Science.gov (United States)

Goldie, Sue J.; Sweet, Steve; Carvalho, Natalie; Natchu, Uma Chandra Mouli; Hu, Delphine

2010-01-01

Background Approximately one-quarter of all pregnancy- and delivery-related maternal deaths worldwide occur in India. Taking into account the costs, feasibility, and operational complexity of alternative interventions, we estimate the clinical and population-level benefits associated with strategies to improve the safety of pregnancy and childbirth in India. Methods and Findings Country- and region-specific data were synthesized using a computer-based model that simulates the natural history of pregnancy (both planned and unintended) and pregnancy- and childbirth-associated complications in individual women; and considers delivery location, attendant, and facility level. Model outcomes included clinical events, population measures, costs, and cost-effectiveness ratios. Separate models were adapted to urban and rural India using survey-based data (e.g., unmet need for birth spacing/limiting, facility births, skilled birth attendants). Model validation compared projected maternal indicators with empiric data. Strategies consisted of improving coverage of effective interventions that could be provided individually or packaged as integrated services, could reduce the incidence of a complication or its case fatality rate, and could include improved logistics such as reliable transport to an appropriate referral facility as well as recognition of referral need and quality of care. Increasing family planning was the most effective individual intervention to reduce pregnancy-related mortality. If over the next 5 y the unmet need for spacing and limiting births was met, more than 150,000 maternal deaths would be prevented; more than US$1 billion saved; and at least one of every two abortion-related deaths averted. Still, reductions in maternal mortality reached a threshold (∼23%–35%) without including strategies that ensured reliable access to intrapartum and emergency obstetrical care (EmOC). An integrated and stepwise approach was identified that would ultimately

Alternative strategies to reduce maternal mortality in India: a cost-effectiveness analysis.

Directory of Open Access Journals (Sweden)

Sue J Goldie

2010-04-01

Full Text Available BACKGROUND: Approximately one-quarter of all pregnancy- and delivery-related maternal deaths worldwide occur in India. Taking into account the costs, feasibility, and operational complexity of alternative interventions, we estimate the clinical and population-level benefits associated with strategies to improve the safety of pregnancy and childbirth in India. METHODS AND FINDINGS: Country- and region-specific data were synthesized using a computer-based model that simulates the natural history of pregnancy (both planned and unintended and pregnancy- and childbirth-associated complications in individual women; and considers delivery location, attendant, and facility level. Model outcomes included clinical events, population measures, costs, and cost-effectiveness ratios. Separate models were adapted to urban and rural India using survey-based data (e.g., unmet need for birth spacing/limiting, facility births, skilled birth attendants. Model validation compared projected maternal indicators with empiric data. Strategies consisted of improving coverage of effective interventions that could be provided individually or packaged as integrated services, could reduce the incidence of a complication or its case fatality rate, and could include improved logistics such as reliable transport to an appropriate referral facility as well as recognition of referral need and quality of care. Increasing family planning was the most effective individual intervention to reduce pregnancy-related mortality. If over the next 5 y the unmet need for spacing and limiting births was met, more than 150,000 maternal deaths would be prevented; more than US$1 billion saved; and at least one of every two abortion-related deaths averted. Still, reductions in maternal mortality reached a threshold ( approximately 23%-35% without including strategies that ensured reliable access to intrapartum and emergency obstetrical care (EmOC. An integrated and stepwise approach was

Alternative strategies to reduce maternal mortality in India: a cost-effectiveness analysis.

Science.gov (United States)

Goldie, Sue J; Sweet, Steve; Carvalho, Natalie; Natchu, Uma Chandra Mouli; Hu, Delphine

2010-04-20

Approximately one-quarter of all pregnancy- and delivery-related maternal deaths worldwide occur in India. Taking into account the costs, feasibility, and operational complexity of alternative interventions, we estimate the clinical and population-level benefits associated with strategies to improve the safety of pregnancy and childbirth in India. Country- and region-specific data were synthesized using a computer-based model that simulates the natural history of pregnancy (both planned and unintended) and pregnancy- and childbirth-associated complications in individual women; and considers delivery location, attendant, and facility level. Model outcomes included clinical events, population measures, costs, and cost-effectiveness ratios. Separate models were adapted to urban and rural India using survey-based data (e.g., unmet need for birth spacing/limiting, facility births, skilled birth attendants). Model validation compared projected maternal indicators with empiric data. Strategies consisted of improving coverage of effective interventions that could be provided individually or packaged as integrated services, could reduce the incidence of a complication or its case fatality rate, and could include improved logistics such as reliable transport to an appropriate referral facility as well as recognition of referral need and quality of care. Increasing family planning was the most effective individual intervention to reduce pregnancy-related mortality. If over the next 5 y the unmet need for spacing and limiting births was met, more than 150,000 maternal deaths would be prevented; more than US$1 billion saved; and at least one of every two abortion-related deaths averted. Still, reductions in maternal mortality reached a threshold ( approximately 23%-35%) without including strategies that ensured reliable access to intrapartum and emergency obstetrical care (EmOC). An integrated and stepwise approach was identified that would ultimately prevent four of five

Efforts of the occupant to change physical quality of residential unit through the change of building material at low cost flats in Jakarta

Science.gov (United States)

Nurdiani, N.

2018-03-01

Low cost flats in Jakarta – Indonesia is provided by the government for low-income people in urban areas, in line with the program to redevelop or renew slum areas. Low cost flat is built with the minimum standard of building materials. The purpose of this study is to know efforts of the occupants to change of building materials at residential unit of low cost flats. The research was conducted by descriptive method at four of low cost housing in Jakarta: Rusuna Bendungan Hilir 1, Rusuna Tambora IIIA, Rusuna Bidara Cina, and Rusuna Sukapura. The results showed that physical changes which happened in low cost flats are aesthetic (residence paint color change), or improvement of physical quality of residential unit (change of building material), become dominant aspects done by residents in four rusuna.

Trade in the US and Mexico helps reduce environmental costs of agriculture

Science.gov (United States)

Martinez-Melendez, Luz A.; Bennett, Elena M.

2016-05-01

Increasing international crop trade has enlarged global shares of cropland, water and fertilizers used to grow crops for export. Crop trade can reduce the environmental burden on importing countries, which benefit from embedded environmental resources in imported crops, and from avoided environmental impacts of production in their territory. International trade can also reduce the universal environmental impact of food production if crops are grown where they are produced in the most environmentally efficient way. We compared production efficiencies for the same crops in the US and Mexico to determine whether current crop trade between these two countries provides an overall benefit to the environment. Our economic and environmental accounting for the key traded crops from 2010 to 2014 shows that exports to Mexico are just 3% (∼16 thousand Gg) of the total production of these crops in the US, and exports to US represent roughly 0.13% (∼46 Gg) of Mexican total production of the same crops. Yields were higher in US than Mexico for all crops except wheat. Use of nitrogen fertilizer was higher in US than in Mexico for all crops except corn. Current trade reduces some, but not all, environmental costs of agriculture. A counterfactual trade scenario showed that an overall annual reduction in cultivated land (∼371 thousand ha), water use (∼923 million m3), fertilizer use (∼122 Gg; ∼68 Gg nitrogen) and pollution (∼681 tonnes of N2O emissions to the atmosphere and ∼511 tonnes of leached nitrogen) can be achieved by changing the composition of food products traded. In this case, corn, soybeans and rice should be grown in the US, while wheat, sorghum and barley should be grown in Mexico. Assigning greater economic weight to the environmental costs of agriculture might improve the balance of trade to be more universally beneficial, environmentally.

Can the household sector reduce global warming mitigation costs? sensitivity to key parameters in a TIMES techno-economic energy model

International Nuclear Information System (INIS)

Astudillo, Miguel F.; Vaillancourt, Kathleen; Pineau, Pierre-Olivier; Amor, Ben

2017-01-01

Highlights: •An energy system model of Quebec is combined with building simulation software. •Greenhouse gas emission reductions efforts increase annual electricity peak demand. •Alternative heating tech. And building envelopes can effectively reduce peak demand. •Denser urban developments massively reduced costs of global warming mitigation. •CO 2 emissions from hydropower reservoirs are relevant in global warming mitigation. -- Abstract: The transition to low carbon societies may increase peak electricity demand, which can be costly to supply with renewable energy, whose availability is uncertain. Buildings are often the main cause of peak demand, and they are believed to hold a large unrealised energy-efficiency potential. If realised, this potential could considerably mitigate the transition costs to low carbon societies, reducing average and peak electricity demands. We explore this potential in several cost-optimal global warming (GW) mitigation scenarios using a multi-sector TIMES energy system model of the province of Quebec for the period 2011–2050. Heating and conservation measures in the residential sector are modelled using building simulations and parameters’ values from the literature. The intra-annual availability of renewable energy and electricity imports is derived from time-series analysis. Additionally, the influence of key parameters such as the projections of primary energy demand and emissions from reservoir impoundment is evaluated. Finally, we discuss some of the barriers that could hamper the energy transition and how they can be overcome. Results indicate that peak demand would rise by 30% due to GW mitigation efforts, but it can be effectively reduced by interventions in the residential sector. Heat pumps are the most cost effective heating technology, despite their lower efficiencies in cold climates. Better-insulated building envelopes have an important role in new houses, reducing by 14% the GW mitigation costs and

Building Commissioning: A Golden Opportunity for Reducing Energy Costs and Greenhouse-gas Emissions

Energy Technology Data Exchange (ETDEWEB)

Mills, Evan

2009-07-16

data are available revealed over 10,000 energy-related problems, resulting in 16% median whole-building energy savings in existing buildings and 13% in new construction, with payback time of 1.1 years and 4.2 years, respectively. In terms of other cost-benefit indicators, median benefit-cost ratios of 4.5 and 1.1, and cash-on-cash returns of 91% and 23% were attained for existing and new buildings, respectively. High-tech buildings were particularly cost-effective, and saved higher amounts of energy due to their energy-intensiveness. Projects with a comprehensive approach to commissioning attained nearly twice the overall median level of savings and five-times the savings of the least-thorough projects. It is noteworthy that virtually all existing building projects were cost-effective by each metric (0.4 years for the upper quartile and 2.4 years for the lower quartile), as were the majority of new-construction projects (1.5 years and 10.8 years, respectively). We also found high cost-effectiveness for each specific measure for which we have data. Contrary to a common perception, cost-effectiveness is often achieved even in smaller buildings. Thanks to energy savings valued more than the cost of the commissioning process, associated reductions in greenhouse gas emissions come at 'negative' cost. In fact, the median cost of conserved carbon is negative - -$110 per tonne for existing buildings and -$25/tonne for new construction - as compared with market prices for carbon trading and offsets in the +$10 to +$30/tonne range. Further enhancing the value of commissioning, its non-energy benefits surpass those of most other energy-management practices. Significant first-cost savings (e.g., through right-sizing of heating and cooling equipment) routinely offset at least a portion of commissioning costs - fully in some cases. When accounting for these benefits, the net median commissioning project cost was reduced by 49% on average, while in many cases they exceeded

Cost consequences due to reduced ulcer healing times - analyses based on the Swedish Registry of Ulcer Treatment.

Science.gov (United States)

Öien, Rut F; Forssell, Henrik; Ragnarson Tennvall, Gunnel

2016-10-01

Resource use and costs for topical treatment of hard-to-heal ulcers based on data from the Swedish Registry of Ulcer Treatment (RUT) were analysed in patients recorded in RUT as having healed between 2009 and 2012, in order to estimate potential cost savings from reductions in frequency of dressing changes and healing times. RUT is used to capture areas of improvement in ulcer care and to enable structured wound management by registering patients with hard-to-heal leg, foot and pressure ulcers. Patients included in the registry are treated in primary care, community care, private care, and inpatient hospital care. Cost calculations were based on resource use data on healing time and frequency of dressing changes in Swedish patients with hard-to-heal ulcers who healed between 2009 and 2012. Per-patient treatment costs decreased from SEK38 223 in 2009 to SEK20 496 in 2012, mainly because of shorter healing times. Frequency of dressing changes was essentially the same during these years, varying from 1·4 to 1·6 per week. The total healing time was reduced by 38%. Treatment costs for the management of hard-to-heal ulcers can be reduced with well-developed treatment strategies resulting in shortened healing times as shown in RUT. © 2015 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

A New Method for Low Cost Production of Titanium Alloys for Reducing Energy Consumption of Mechanical Systems

Energy Technology Data Exchange (ETDEWEB)

Fang, Z. Zak [Univ. of Utah, Salt Lake City, UT (United States); Chandran, Ravi [Univ. of Utah, Salt Lake City, UT (United States); Koopman, Mark [Univ. of Utah, Salt Lake City, UT (United States)

2016-02-29

This project investigated an innovative manufacturing process intended to minimize the cost of production of titanium materials and components, and increase the adoption of Ti components for energy consuming applications, such as automobiles. A key innovation of the proposed manufacturing approach is a novel Ti powder sintering technology for making titanium materials with ultrafine grain microstructure in the as-sintered state with minimum, or an absence, of post-sintering processes. The new sintering technology is termed Hydrogen Sintering and Phase Transformations (HSPT), and constitutes a promising manufacturing technology that can be used to produce titanium (Ti) materials and components in a near-net-shape form, thus also minimizing machining costs. Our objective was to meet, or possibly surpass, the mechanical property levels for ASTM B348 Grade 5 for wrought Ti-6Al-4V. Although specific applications call for varying mechanical property requirements, ASTM B348 was created for the demanding applications of the aerospace industry, and is the established standard for Ti-6Al-4V. While the primary goal was to meet, or exceed this standard, the team also had the goal of demonstrating this could be done at a significantly lower cost of production. Interim goals of the project were to fully develop this novel sintering process, and provide sufficient baseline testing to make the method practical and attractive to industry. By optimizing the process parameters for the sintering of titanium hydride (TiH₂) powders in a hydrogen atmosphere and controlling the phase transformations during and after sintering, the HSPT process was expected to reduce the energy consumption, and thus cost, of making Ti alloys and fabricating Ti components. The process was designed such that no high temperature melting is required for producing Ti alloys; little or no post-sintering processing is needed for producing desired microstructures (and therefore enhanced mechanical

Reduced activation structural materials for fusion power plants - The European Union program

International Nuclear Information System (INIS)

Schaaf, B. van der; Le Marois, G.; Moeslang, A.; Victoria, M.

2003-01-01

The competition of fusion power plants with the renewable energy sources in the second half of the 21st century requires structural materials operating at high temperatures, and sufficient radiation resistance to ensure high plant efficiency and availability. The reduced activation materials development in the EU counts several steps regarding the radiation damage resistance: 75 dpa for DEMO and 150 dpa and beyond for power plants. The maximum operating temperature development line ranges from the present day from the present day feasible 600 K up to 1300- K in advanced power plants. The reduced activation steel, RAS, forms the reference for the development efforts. EUROFER has been manufactured in the EU on industrial scale with specified purity and mechanical properties up to 825 K. The oxide dispersion strengthened , ODS, variety of RAS should reach the 925 K operation limit. The EU has selected silicon carbide ceramic composite as the primary high temperature, 1300 K, goal. On a small scale the potential of tungsten alloys for higher temperatures is investigated. The present test environments for radiation resistance are insufficient to provide data for DEMO. Hence the support of the EU for the International Fusion Materials Irradiation facility. The computational modelling is expected to guide the materials development and the design of near plasma components. The EU co-operates closely with Japan, the RF and US in IEA and IAEA co-ordinated agreements, which are highly beneficial for the fusion structural materials development. (author)

Reducing costs while maintaining quality in endovascular neurosurgical procedures.

Science.gov (United States)

Kashlan, Osama N; Wilson, Thomas J; Chaudhary, Neeraj; Gemmete, Joseph J; Stetler, William R; Dunnick, N Reed; Thompson, B Gregory; Pandey, Aditya S

2014-11-01

As medical costs continue to rise during a time of increasing medical resource utilization, both hospitals and physicians must attempt to limit superfluous health care expenses. Neurointerventional treatment has been shown to be costly, but it is often the best treatment available for certain neuropathologies. The authors studied the effects of 3 policy changes designed to limit the costs of performing neurointerventional procedures at the University of Michigan. The authors retrospectively analyzed the costs of performing neurointerventional procedures during the 6-month periods before and after the implementation of 3 cost-saving policies: 1) the use of an alternative, more economical contrast agent, 2) standardization of coil prices through negotiation with industry representatives to receive economies of scale, and 3) institution of a feedback method to show practitioners the costs of unused products per patient procedure. The costs during the 6-month time intervals before and after implementation were also compared with costs during the most recent 6-month time period. The policy requiring use of a more economical contrast agent led to a decrease in the cost of contrast usage of $42.79 per procedure for the first 6 months after implementation, and $137.09 per procedure for the most current 6-month period, resulting in an estimated total savings of $62,924.31 for the most recent 6-month period. The standardized coil pricing system led to savings of $159.21 per coil after the policy change, and $188.07 per coil in the most recent 6-month period. This yielded total estimated savings of $76,732.56 during the most recent 6-month period. The feedback system for unused items decreased the cost of wasted products by approximately $44.36 per procedure in the 6 months directly after the policy change and by $48.20 per procedure in the most recent 6-month period, leading to total estimated savings of $22,123.80 during the most recent 6-month period. According to

ROMI 3.1 Least-cost lumber grade mix solver using open source statistical software

Science.gov (United States)

Rebecca A. Buck; Urs Buehlmann; R. Edward. Thomas

2010-01-01

The least-cost lumber grade mix solution has been a topic of interest to both industry and academia for many years due to its potential to help wood processing operations reduce costs. A least-cost lumber grade mix solver is a rough mill decision support system that describes the lumber grade or grade mix needed to minimize raw material or total production cost (raw...

Energy Efficiency Improvement and Cost Saving Oportunities for the Concrete Industry

Energy Technology Data Exchange (ETDEWEB)

Kermeli, Katerina; Worrell, Ernst; Masanet, Eric

2011-12-01

The U.S. concrete industry is the main consumer of U.S.-produced cement. The manufacturing of ready mixed concrete accounts for more than 75% of the U.S. concrete production following the manufacturing of precast concrete and masonry units. The most significant expenditure is the cost of materials accounting for more than 50% of total concrete production costs - cement only accounts for nearly 24%. In 2009, energy costs of the U.S. concrete industry were over $610 million. Hence, energy efficiency improvements along with efficient use of materials without negatively affecting product quality and yield, especially in times of increased fuel and material costs, can significantly reduce production costs and increase competitiveness. The Energy Guide starts with an overview of the U.S. concrete industry’s structure and energy use, a description of the various manufacturing processes, and identification of the major energy consuming areas in the different industry segments. This is followed by a description of general and process related energy- and cost-efficiency measures applicable to the concrete industry. Specific energy and cost savings and a typical payback period are included based on literature and case studies, when available. The Energy Guide intends to provide information on cost reduction opportunities to energy and plant managers in the U.S. concrete industry. Every cost saving opportunity should be assessed carefully prior to implementation in individual plants, as the economics and the potential energy and material savings may differ.

Reducing Anesthesia and Health Care Cost Through Utilization of Child Life Specialists in Pediatric Radiation Oncology.

Science.gov (United States)

Scott, Michael T; Todd, Kimberly E; Oakley, Heather; Bradley, Julie A; Rotondo, Ronny L; Morris, Christopher G; Klein, Stuart; Mendenhall, Nancy P; Indelicato, Daniel J

2016-10-01

To analyze the effectiveness of a certified child life specialist (CCLS) in reducing the frequency of daily anesthesia at our institution, and to quantify the potential health care payer cost savings of CCLS utilization in the United States. From 2006 to 2014, 738 children (aged ≤21 years) were treated with radiation therapy at our institution. We retrospectively analyzed the frequency of daily anesthesia before and after hiring a CCLS in 2011 after excluding patients aged 0 to 2 and >12 years. In the analyzed cohort of 425 patients the median age was 7.6 years (range, 3-12.9 years). For the pre-CCLS period the overall median age was 7.5 years; for the post-CCLS period the median age was 7.7 years. An average 6-week course of pediatric anesthesia for radiation therapy costs $50,000 in charges to the payer. The average annual cost to employ one CCLS is approximately $50,000. Before employing a CCLS, 69 of 121 children (57%) aged 3 to 12 years required daily anesthesia, including 33 of 53 children (62.3%) aged 5 to 8 years. After employing a CCLS, 124 of 304 children (40.8%) aged 3 to 12 years required daily anesthesia, including only 34 of 118 children (28.8%) aged 5 to 8 years (P16% absolute reduction in anesthesia use after employment of a CCLS, the health care payer cost savings was approaching $50,000 per 6 children aged 3 to 12 years treated annually with radiation therapy in our institution. This reduction resulted in a total of only 6 children aged 3 to 12 years required anesthesia to be treated per year at our center to achieve nearly break-even cost savings to the health care payer if the payer were to subsidize the employment expense of a CCLS. Overall, the CCLS intervention can provide an average annualized health care payer cost savings of "$[(anesthesia cost to payer during radiation therapy course/6) - (CCLS expense to payer/N)]" per child (N) treated with radiation therapy, where N equals the number of children aged 3 to 12�

Reducing surface water pollution through the assessment of the cost-effectiveness of BMPs at different spatial scales.

Science.gov (United States)

Panagopoulos, Y; Makropoulos, C; Mimikou, M

2011-10-01

Two kinds of agricultural Best Management Practices (BMPs) were examined with respect to cost-effectiveness (CE) in reducing sediment, nitrates-nitrogen (NO(3)-N) and total phosphorus (TP) losses to surface waters of the Arachtos catchment in Western Greece. The establishment of filter strips at the edge of fields and a non-structural measure, namely fertilization reduction in alfalfa, combined with contour farming and zero-tillage in corn and reduction of animal numbers in pastureland, were evaluated. The Soil and Water Assessment Tool (SWAT) model was used as the non-point-source (NPS) estimator, while a simple economic component was developed estimating BMP implementation cost as the mean annual expenses needed to undertake and operate the practice for a 5-year period. After each BMP implementation, the ratio of their CE in reducing pollution was calculated for each Hydrologic Response Unit (HRU) separately, for each agricultural land use type entirely and for the whole catchment. The results at the HRU scale are presented comprehensively on a map, demonstrating the spatial differentiation of CE ratios across the catchment that enhances the identification of locations where each BMP is most advisable for implementation. Based on the analysis, a catchment management solution of affordable total cost would include the expensive measure of filter strips in corn and only in a small number of pastureland fields, in combination with the profitable measure of reducing fertilization to alfalfa fields. When examined for its impact on river loads at the outlet, the latter measure led to a 20 tn or 8% annual decrease of TP from the baseline with savings of 15€/kg of pollutant reduction. Filter strips in corn fields reduced annual sediments by 66 Ktn or 5%, NO(3)-N by 71 tn or 9.5% and TP by 27 tn or 10%, with an additional cost of 3.1 €/tn, 3.3 €/kg and 8.1 €/kg of each pollutant respectively. The study concludes that considerable reductions of several

Cost benchmarking of railway projects in Europe – can it help to reduce costs?

DEFF Research Database (Denmark)

Trabo, Inara; Landex, Alex; Nielsen, Otto Anker

a certain overview of the range of costs in various budget disciplines. The Copenhagen-Ringsted project is shown to be right in the middle of the range in terms of total costs per kilometre, and its values in the discipline comparisons do not significantly differ from the values of the less expensive...... projects. Deeper analysis of project unit costs is still continuing, but the preliminary results show that the cost values for projects located in the same geographical zone are similar. For example, this can be explained by their use of the same construction companies. However, unit prices in southern...

Quality improvement in hospitals: how much does it reduce healthcare costs?

Science.gov (United States)

Jones, S B

1995-01-01

The philosophy of W.E. Deming suggests that continuous quality improvement efforts, when properly applied, ultimately will lead to financial dividends and will help ensure business longevity. Reducing hospital charges can be exciting for the participants and can provide an impetus for expanding quality improvement efforts. Americans, however, tend to demand almost instant gratification and have limited patience for longer-term results. This factor, coupled with minimal knowledge of actual operational costs and inaccurate charge accounting systems, may lead hospital managers to misinterpret the potential net long-term effects of their quality improvement efforts. In the approaching environment of capitated reimbursement, such mistakes may have serious consequences.

Low-cost phase change material as an energy storage medium in building envelopes: Experimental and numerical analyses

International Nuclear Information System (INIS)

Biswas, Kaushik; Abhari, Ramin

2014-01-01

Highlights: • Testing of a low-cost bio-PCM in an exterior wall under varying weather conditions. • Numerical model validation and annual simulations of PCM-enhanced cellulose insulation. • Reduced wall-generated cooling electricity consumption due to the application of PCM. • PCM performance was sensitive to its location and distribution within the wall. - Abstract: A promising approach to increasing the energy efficiency of buildings is the implementation of a phase change material (PCM) in the building envelope. Numerous studies over the last two decades have reported the energy saving potential of PCMs in building envelopes, but their wide application has been inhibited, in part, by their high cost. This article describes a novel PCM made of naturally occurring fatty acids/glycerides trapped into high density polyethylene (HDPE) pellets and its performance in a building envelope application. The PCM–HDPE pellets were mixed with cellulose insulation and then added to an exterior wall of a test building in a hot and humid climate, and tested over a period of several months. To demonstrate the efficacy of the PCM-enhanced cellulose insulation in reducing the building envelope heat gains and losses, a side-by-side comparison was performed with another wall section filled with cellulose-only insulation. Further, numerical modeling of the test wall was performed to determine the actual impact of the PCM–HDPE pellets on wall-generated heating and cooling loads and the associated electricity consumption. The model was first validated using experimental data and then used for annual simulations using typical meteorological year (TMY3) weather data. This article presents the experimental data and numerical analyses showing the energy-saving potential of the new PCM

Reduce operational cost and extend the life of pipeline infrastructure by automating remote cathodic protection systems

Energy Technology Data Exchange (ETDEWEB)

Rosado, Elroy [Freewave Technologies, Inc., Boulder, CO (United States). Latin America

2009-07-01

Energy and Pipeline Companies wrestle to control operating costs largely affected by new government regulations, ageing buried metal assets, rising steel prices, expanding pipeline operations, new interference points, HCA encroachment, restrictive land use policies, heightened network security, and an ageing soon-to-retire work force. With operating costs on the rise, seemingly out of control, many CP and Operations Professionals look to past best practices in cost containment through automation. Many companies achieve solid business results through deployment of telemetry and SCADA automation of remote assets and now hope to expand this success to further optimize operations by automating remote cathodic protection systems. This presentation will provide examples of how new remote cathodic protection systems are helping energy and pipeline companies address the growing issue of the aging pipeline infrastructure and reduce their costs while optimizing their operations. (author)

Low-cost NORM concentrations measuring technique for building materials of Uzbekistan

Science.gov (United States)

Safarov, Akmal; Safarov, Askar; Azimov, Askarali; Darby, Iain G.

2016-04-01

Concentrations of natural radionuclides of building materials are important in order to estimate exposure of humans to radiation, who can spend up to 80% of their time indoors. One of the indicators of building materials' safety is the radium equivalent activity, which is regulated by national and international normative documents [1,2,3]. Materials with Ra(eq) =stone, red sand, granite, white marble and concrete cubes was performed both before and after ageing of samples (10, 20, 30 and 40 days). Measurement times of samples were 1, 3, 6 and 12 hours. Samples were measured in 1 liter Marinelli beaker geometry, using NaI(Tl) spectrometers with crystal sizes 2.5 x 2.5 in and 3.1 x 3.1 in. Efficiency calibration of spectrometers was done using certified volumetric (1 liter Marinelli beaker) Ra-226, Th-232 and K-40 sources filled with silica sand and density 1,7 kg/l. Herein we present results indicating that one hour measuring may be sufficient for samples in 1 liter Marinelli beakers offering prospect of significant time and cost improvements. References: 1. NEA-OECD (1979): Exposure to radiation from natural radioactivity in building materials. Report by Group of Experts of the OECD Nuclear Energy Agency (NEA) Paris 2. STUK (Radiation and Nuclear Safety Authority) (2003): The radioactivity of building materials and ash. Regulatory Guides on Radiation Safety (ST Guides) ST 12.2 (Finland) (8 October 2003) 3. GOST 30108-94 (1995): Building materials and elements. Determination of specific activity of natural radioactive nuclei. Interstate Standard. 4. Krisiuk E.M. et al., (1971). A study on Radioactivity in Building Materials (Leningrad: Research Institute for radiation Hygiene) 5. Beretka, J., & Mathew, P. J. (1985). Natural radioactivity of Australian building materials, waste and by-products. Health Physics, 48, 87-95. 6. Uosif M.A.M. (2014). Estimation of Radiological Hazards of Some Egyptian Building Materials Due to Natural Radioactivity. International Journal

Bioenergy, material, and nutrients recovery from household waste: Advanced material, substance, energy, and cost flow analysis of a waste refinery process

International Nuclear Information System (INIS)

Tonini, Davide; Dorini, Gianluca; Astrup, Thomas Fruergaard

2014-01-01

Highlights: • We modeled material, substance, energy, and cost flows of a waste refinery process. • Ca. 56% of 1 Mg dry waste input can be recovered as bioliquid yielding 6.2 GJ biogas. • Nutrients and carbon recovery in the bioliquid was estimated to 81–89%. • The biogenic carbon in the input waste was 63% of total carbon based on 14 C analyses. • The quality of the digestate may be critical with respect to use on land. - Abstract: Energy, materials, and resource recovery from mixed household waste may contribute to reductions in fossil fuel and resource consumption. For this purpose, legislation has been enforced to promote energy recovery and recycling. Potential solutions for separating biogenic and recyclable materials are offered by waste refineries where a bioliquid is produced from enzymatic treatment of mixed waste. In this study, potential flows of materials, energy, and substances within a waste refinery were investigated by combining sampling, analyses, and modeling. Existing material, substance, and energy flow analysis was further advanced by development of a mathematical optimization model for determination of the theoretical recovery potential. The results highlighted that the waste refinery may recover ca. 56% of the dry matter input as bioliquid, yielding 6.2 GJ biogas-energy. The potential for nitrogen, phosphorous, potassium, and biogenic carbon recovery was estimated to be between 81% and 89% of the input. Biogenic and fossil carbon in the mixed household waste input was determined to 63% and 37% of total carbon based on 14 C analyses. Additional recovery of metals and plastic was possible based on further process optimization. A challenge for the process may be digestate quality, as digestate may represent an emission pathway when applied on land. Considering the potential variability of local revenues for energy outputs, the costs for the waste refinery solution appeared comparable with alternatives such as direct incineration

The effective cost of tritium for tokamak fusion power reactors with reduced tritium production systems

International Nuclear Information System (INIS)

Gilligan, J.G.; Evans, K.

1983-01-01

If sufficient tritium cannot be produced and processed in tokamak blankets then at least two alternatives are possible. Tritium can be purchased; or reactors with reduced tritium (RT) content in the plasma can be designed. The latter choice may require development of magnet technology etc., but the authors show that the impact on the cost-of-electricity may be mild. Cost tradeoffs are compared to the market value of tritium. Adequate tritium production in fusion blankets is preferred, but the authors show there is some flexibility in the deployment of fusion if this is not possible

Reconciling quality and cost: A case study in interventional radiology

International Nuclear Information System (INIS)

Zhang, Li; Mahnken, Andreas; Domroese, Sascha

2015-01-01

To provide a method to calculate delay cost and examine the relationship between quality and total cost. The total cost including capacity, supply and delay cost for running an interventional radiology suite was calculated. The capacity cost, consisting of labour, lease and overhead costs, was derived based on expenses per unit time. The supply cost was calculated according to actual procedural material use. The delay cost and marginal delay cost derived from queueing models was calculated based on waiting times of inpatients for their procedures. Quality improvement increased patient safety and maintained the outcome. The average daily delay costs were reduced from 1275 EUR to 294 EUR, and marginal delay costs from approximately 2000 EUR to 500 EUR, respectively. The one-time annual cost saved from the transfer of surgical to radiological procedures was approximately 130,500 EUR. The yearly delay cost saved was approximately 150,000 EUR. With increased revenue of 10,000 EUR in project phase 2, the yearly total cost saved was approximately 290,000 EUR. Optimal daily capacity of 4.2 procedures was determined. An approach for calculating delay cost toward optimal capacity allocation was presented. An overall quality improvement was achieved at reduced costs. (orig.)

Reconciling quality and cost: A case study in interventional radiology

Energy Technology Data Exchange (ETDEWEB)

Zhang, Li; Mahnken, Andreas [University Hospital Giessen and Marburg, Philipps University of Marburg, Department of Diagnostic and Interventional Radiology, Baldinger Strasse, Marburg (Germany); Domroese, Sascha [University Hospital Giessen and Marburg, Philipps University of Marburg, Division of Controlling, Baldinger Strasse, Marburg (Germany)

2015-10-15

To provide a method to calculate delay cost and examine the relationship between quality and total cost. The total cost including capacity, supply and delay cost for running an interventional radiology suite was calculated. The capacity cost, consisting of labour, lease and overhead costs, was derived based on expenses per unit time. The supply cost was calculated according to actual procedural material use. The delay cost and marginal delay cost derived from queueing models was calculated based on waiting times of inpatients for their procedures. Quality improvement increased patient safety and maintained the outcome. The average daily delay costs were reduced from 1275 EUR to 294 EUR, and marginal delay costs from approximately 2000 EUR to 500 EUR, respectively. The one-time annual cost saved from the transfer of surgical to radiological procedures was approximately 130,500 EUR. The yearly delay cost saved was approximately 150,000 EUR. With increased revenue of 10,000 EUR in project phase 2, the yearly total cost saved was approximately 290,000 EUR. Optimal daily capacity of 4.2 procedures was determined. An approach for calculating delay cost toward optimal capacity allocation was presented. An overall quality improvement was achieved at reduced costs. (orig.)

Active materials for automotive adaptive forward lighting Part 1: system requirements vs. material properties

Science.gov (United States)

Keefe, Andrew C.; Browne, Alan L.; Johnson, Nancy L.

2011-04-01

Adaptive Frontlighting Systems (AFS in GM usage) improve visibility by automatically optimizing the beam pattern to accommodate road, driving and environmental conditions. By moving, modifying, and/or adding light during nighttime, inclement weather, or in sharp turns, the driver is presented with dynamic illumination not possible with static lighting systems The objective of this GM-HRL collaborative research project was to assess the potential of active materials to decrease the cost, mass, and packaging volume of current electric stepper-motor AFS designs. Solid-state active material actuators, if proved suitable for this application, could be less expensive than electric motors and have lower part count, reduced size and weight, and lower acoustic and EMF noise1. This paper documents Part 1 of the collaborative study, assessing technically mature, commercially available active materials for use as actuators. Candidate materials should reduce cost and improve AFS capabilities, such as increased angular velocity on swivel. Additional benefits to AFS resulting from active materials actuators were to be identified as well such as lower part count. In addition, several notional approaches to AFS were documented to illustrate the potential function, which is developed more fully in Part 2. Part 1 was successful in verifying the feasibility of using two active materials for AFS: shape memory alloys, and piezoelectrics. In particular, this demonstration showed that all application requirements including those on actuation speed, force, and cyclic stability to effect manipulation of the filament assembly and/or the reflector could be met by piezoelectrics (as ultrasonic motors) and SMA wire actuators.

Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries

Science.gov (United States)

Li, Jianlin; Du, Zhijia; Ruther, Rose E.; AN, Seong Jin; David, Lamuel Abraham; Hays, Kevin; Wood, Marissa; Phillip, Nathan D.; Sheng, Yangping; Mao, Chengyu; Kalnaus, Sergiy; Daniel, Claus; Wood, David L.

2017-09-01

Reducing cost and increasing energy density are two barriers for widespread application of lithium-ion batteries in electric vehicles. Although the cost of electric vehicle batteries has been reduced by 70% from 2008 to 2015, the current battery pack cost (268/kWh in 2015) is still >2 times what the USABC targets (125/kWh). Even though many advancements in cell chemistry have been realized since the lithium-ion battery was first commercialized in 1991, few major breakthroughs have occurred in the past decade. Therefore, future cost reduction will rely on cell manufacturing and broader market acceptance. This article discusses three major aspects for cost reduction: (1) quality control to minimize scrap rate in cell manufacturing; (2) novel electrode processing and engineering to reduce processing cost and increase energy density and throughputs; and (3) material development and optimization for lithium-ion batteries with high-energy density. Insights on increasing energy and power densities of lithium-ion batteries are also addressed.

Can delivery systems use cost-effectiveness analysis to reduce healthcare costs and improve value?

Science.gov (United States)

Savitz, Lucy A; Savitz, Samuel T

2016-01-01

Understanding costs and ensuring that we demonstrate value in healthcare is a foundational presumption as we transform the way we deliver and pay for healthcare in the U.S. With a focus on population health and payment reforms underway, there is increased pressure to examine cost-effectiveness in healthcare delivery. Cost-effectiveness analysis (CEA) is a type of economic analysis comparing the costs and effects (i.e. health outcomes) of two or more treatment options. The result is expressed as a ratio where the denominator is the gain in health from a measure (e.g. years of life or quality-adjusted years of life) and the numerator is the incremental cost associated with that health gain. For higher cost interventions, the lower the ratio of costs to effects, the higher the value. While CEA is not new, the approach continues to be refined with enhanced statistical techniques and standardized methods. This article describes the CEA approach and also contrasts it to optional approaches, in order for readers to fully appreciate caveats and concerns. CEA as an economic evaluation tool can be easily misused owing to inappropriate assumptions, over reliance, and misapplication. Twelve issues to be considered in using CEA results to drive healthcare delivery decision-making are summarized. Appropriately recognizing both the strengths and the limitations of CEA is necessary for informed resource allocation in achieving the maximum value for healthcare services provided.

FY2015 Propulsion Materials Annual Report

Energy Technology Data Exchange (ETDEWEB)

None, None

2016-12-30

The Propulsion Materials Program actively supports the energy security and reduction of greenhouse emissions goals of VTO by investigating and identifying the materials properties that are most essential for continued development of cost-effective, highly efficient, and environmentally friendly next-generation heavy and light-duty powertrains. The technical approaches available to enhance propulsion systems focus on improvements in both vehicle efficiency and fuel substitution, both of which must overcome the performance limitations of the materials currently in use. Propulsion Materials Program activities work with national laboratories, industry experts, and VTO powertrain systems (e.g., Advanced Combustion Engines [ACE], Advanced Power Electronics and Electrical Machines [APEEM], and fuels) teams to develop strategies that overcome materials limitations in future powertrain performance. The technical maturity of the portfolio of funded projects ranges from basic science to subsystem prototype validation. Projects within a Propulsion Materials Program activity address materials concerns that directly impact critical technology barriers within each of the above programs, including barriers that impact fuel efficiency, thermal management, emissions reduction, improved reliability, and reduced manufacturing costs. The program engages only the barriers that result from material property limitations and represent fundamental, high-risk materials issues.

Higher safety and saving of filter material with multi-way sorption filters

International Nuclear Information System (INIS)

Ohlmeyer, M.; Benzel, M.

1978-01-01

The multi-way filter 'Nuclear Karlsruhe' satisfies the requirements of operational safety, high utilisation of the filter material and low pressure drop. An important factor contributing to increased operational safety is due to the fact that the nearly total utilisation of the filter material eliminates the need for optimisation weighing costs against safety. The reduction in filter material consumption reduces not only the direct procurement costs but also the costs of nuclear plants, is radioactive. This contributes in several respects towards a better protection of the environment. The MWS filter can also be used, and presents the same advantages, in non-nuclear plants. (orig.) [de