Intact and impaired conceptual memory processes in amnesia.

Science.gov (United States)

Keane, M M; Gabrieli, J D; Monti, L A; Fleischman, D A; Cantor, J M; Noland, J S

1997-01-01

To examine the status of conceptual memory processes in amnesia, a conceptual memory task with implicit or explicit task instructions was given to amnesic and control groups. After studying a list of category exemplars, participants saw category labels and were asked to generate as many exemplars as possible (an implicit memory task) or to generate exemplars that had been in the prior study list (an explicit memory task). After incidental deep or shallow encoding of exemplars, amnesic patients showed normal implicit memory performance (priming), a normal levels-of-processing effect on priming, and impaired explicit memory performance. After intentional encoding of exemplars, amnesic patients showed impaired implicit and explicit memory performance. Results suggest that although amnesic patients can show impairments on implicit and explicit conceptual memory tasks, their deficit does not generalize to all conceptual memory tasks.

Flexible and fast: linguistic shortcut affects both shallow and deep conceptual processing.

Science.gov (United States)

Connell, Louise; Lynott, Dermot

2013-06-01

Previous research has shown that people use linguistic distributional information during conceptual processing, and that it is especially useful for shallow tasks and rapid responding. Using two conceptual combination tasks, we showed that this linguistic shortcut extends to the processing of novel stimuli, is used in both successful and unsuccessful conceptual processing, and is evident in both shallow and deep conceptual tasks. Specifically, as predicted by the ECCo theory of conceptual combination, people use the linguistic shortcut as a "quick-and-dirty" guide to whether the concepts are likely to combine into a coherent conceptual representation, in both shallow sensibility judgment and deep interpretation generation tasks. Linguistic distributional frequency predicts both the likelihood and the time course of rejecting a novel word compound as nonsensical or uninterpretable. However, it predicts the time course of successful processing only in shallow sensibility judgment, because the deeper conceptual process of interpretation generation does not allow the linguistic shortcut to suffice. Furthermore, the effects of linguistic distributional frequency are independent of any effects of conventional word frequency. We discuss the utility of the linguistic shortcut as a cognitive triage mechanism that can optimize processing in a limited-resource conceptual system.

Concept analysis of recovery in mental illness in young adulthood.

Science.gov (United States)

McCauley, C O; McKenna, H P; Keeney, S; McLaughlin, D F

2015-10-01

Recovery, as a concept, emerged as a core philosophy of the service user movement that began in the late 1960s and 1970s. Previous reviews on recovery in mental health have presented definitions or a conceptual framework; however, over time it has been open to disparate interpretations. The aim of this paper was to conduct the first concept analysis of mental health recovery in young adulthood within various multidisciplinary contexts. Rodgers's (2000) six-stepped evolutionary method enabled the analysis of recovery's conceptual characteristics, the identification of an exemplar and the proposition of a hypothesis with implications for practice. This analysis has revealed the derivation of the term recovery does not convey its identified conceptual characteristics. Identified attributes include the reawakening of hope, reclaiming a positive self and meaning through personal growth. Antecedents include the disruption of illness, stigmatization, internal inventory and contemplative recovery. Identified consequences include the return to normality, reconstruction of self and active social connection. The new conceptual definition is the reawakening of hope and rediscovery of a positive sense of self through finding meaning and purpose within personal growth and connection using creative self-care coping strategies. This paper reveals an apparent disparity between professional and personal interpretations of recovery. Therefore, the implication for mental health nursing is the congruence of recovery-orientated practice with the process of recovery experienced by young adult service users. © 2015 John Wiley & Sons Ltd.

Linking neural and symbolic representation and processing of conceptual structures

NARCIS (Netherlands)

van der Velde, Frank; Forth, Jamie; Nazareth, Deniece S.; Wiggins, Geraint A.

2017-01-01

We compare and discuss representations in two cognitive architectures aimed at representing and processing complex conceptual (sentence-like) structures. First is the Neural Blackboard Architecture (NBA), which aims to account for representation and processing of complex and combinatorial conceptual

Measures of the recovery orientation of mental health services: systematic review.

Science.gov (United States)

Williams, J; Leamy, M; Bird, V; Harding, C; Larsen, J; Le Boutillier, C; Oades, L; Slade, M

2012-11-01

The review aimed to (1) identify measures that assess the recovery orientation of services; (2) discuss how these measures have conceptualised recovery, and (3) characterise their psychometric properties. A systematic review was undertaken using seven sources. The conceptualisation of recovery within each measure was investigated by rating items against a conceptual framework of recovery comprising five recovery processes: connectedness; hope and optimism; identity; meaning and purpose; and empowerment. Psychometric properties of measures were evaluated using quality criteria. Thirteen recovery orientation measures were identified, of which six met eligibility criteria. No measure was a good fit with the conceptual framework. No measure had undergone extensive psychometric testing and none had data on test-retest reliability or sensitivity to change. Many measures have been developed to assess the recovery orientation of services. Comparisons between the measures were hampered by the different conceptualisations of recovery used and by the lack of uniformity on the level of organisation at which services were assessed. This situation makes it a challenge for services and researchers to make an informed choice on which measure to use. Further work is needed to produce measures with a transparent conceptual underpinning and demonstrated psychometric properties.

Conceptual methods for actinide partitioning

International Nuclear Information System (INIS)

Leuze, R.E.; Bond, W.D.; Tedder, D.W.

1978-01-01

The conceptual processing sequence under consideration is based on a combination of modified Purex processing and secondary processing of the high-level waste. In this concept, iodine will be removed from dissolver solution prior to extraction, and the Purex processing will be modified so that low- and intermediate-level wastes, all the way through final product purification, are recycled. A supplementary extraction is assumed to ensure adequate recovery of uranium, neptunium and possibly plutonium. Technetium may be removed from the high-level waste if a satisfactory method can be developed. Extraction into a quaternary amine is being evaluated for this removal. Methods that have been used in the past to recover americium and curium have some rather serious deficiencies, including inadequate recovery, solids formation and generation of large volumes of low- and intermediate-level wastes containing significant quantities of chemical reagents

Conceptual Frameworks in the Doctoral Research Process: A Pedagogical Model

Science.gov (United States)

Berman, Jeanette; Smyth, Robyn

2015-01-01

This paper contributes to consideration of the role of conceptual frameworks in the doctoral research process. Through reflection on the two authors' own conceptual frameworks for their doctoral studies, a pedagogical model has been developed. The model posits the development of a conceptual framework as a core element of the doctoral…

Neurological evidence linguistic processes precede perceptual simulation in conceptual processing.

Science.gov (United States)

Louwerse, Max; Hutchinson, Sterling

2012-01-01

There is increasing evidence from response time experiments that language statistics and perceptual simulations both play a role in conceptual processing. In an EEG experiment we compared neural activity in cortical regions commonly associated with linguistic processing and visual perceptual processing to determine to what extent symbolic and embodied accounts of cognition applied. Participants were asked to determine the semantic relationship of word pairs (e.g., sky - ground) or to determine their iconic relationship (i.e., if the presentation of the pair matched their expected physical relationship). A linguistic bias was found toward the semantic judgment task and a perceptual bias was found toward the iconicity judgment task. More importantly, conceptual processing involved activation in brain regions associated with both linguistic and perceptual processes. When comparing the relative activation of linguistic cortical regions with perceptual cortical regions, the effect sizes for linguistic cortical regions were larger than those for the perceptual cortical regions early in a trial with the reverse being true later in a trial. These results map upon findings from other experimental literature and provide further evidence that processing of concept words relies both on language statistics and on perceptual simulations, whereby linguistic processes precede perceptual simulation processes.

Neural Adaptation Effects in Conceptual Processing

Directory of Open Access Journals (Sweden)

Barbara F. M. Marino

2015-07-01

Full Text Available We investigated the conceptual processing of nouns referring to objects characterized by a highly typical color and orientation. We used a go/no-go task in which we asked participants to categorize each noun as referring or not to natural entities (e.g., animals after a selective adaptation of color-edge neurons in the posterior LV4 region of the visual cortex was induced by means of a McCollough effect procedure. This manipulation affected categorization: the green-vertical adaptation led to slower responses than the green-horizontal adaptation, regardless of the specific color and orientation of the to-be-categorized noun. This result suggests that the conceptual processing of natural entities may entail the activation of modality-specific neural channels with weights proportional to the reliability of the signals produced by these channels during actual perception. This finding is discussed with reference to the debate about the grounded cognition view.

Assessing the additional impact of Process Recovery Communications on Customer Outcomes: A Comprehensive Service Recovery Approach

OpenAIRE

Y. VAN VAERENBERGH; B. LARIVIÈRE; I. VERMEIR

2009-01-01

Purpose – Services recoveries following service failures not only imply customer recovery opportunities in which customer-company relationships can be restored, they can also result in process improvements (i.e. process recoveries in literature). This paper seeks to identify the additional impact of process recoveries on four customer outcome variables (satisfaction with service recovery, overall satisfaction, repurchase intent and word-of-mouth) by communicating these improvements back to th...

Fluent conceptual processing and explicit memory for faces are electrophysiologically distinct.

Science.gov (United States)

Voss, Joel L; Paller, Ken A

2006-01-18

Implicit memory and explicit memory are fundamentally different manifestations of memory storage in the brain. Yet, conceptual fluency driven by previous experience could theoretically be responsible for both conceptual implicit memory and aspects of explicit memory. For example, contemplating the meaning of a word might serve to speed subsequent processing of that word and also make it seem familiar. We examined electrophysiological correlates of conceptual priming with 180 celebrity faces to determine whether or not they resemble electrophysiological correlates of explicit memory. Celebrity faces are ideal for this purpose because they carry with them preexisting conceptual information (i.e., biographical facts) that can selectively be brought to mind such that conceptual processing can be manipulated systematically. In our experiment, exposure to biographical information associated with only one-half of the celebrities yielded conceptual priming for those faces, whereas all faces were perceptually primed. Conceptual priming was indexed by positive brain potentials over frontal regions from approximately 250 to 500 ms. Explicit memory retrieval was associated with later brain potentials over posterior regions that were strikingly similar to potentials previously associated with pure familiarity for faces (when a face seems familiar in the absence of retrieval of any specific information about previous occurrence). Furthermore, the magnitude of conceptual priming was correlated across subjects with the amplitude of frontal but not posterior potentials, whereas the opposite was true for explicit memory. Distinct brain processes were thus associated with conceptual priming and conscious recognition of faces, thus providing a sharper focus on the border between implicit and explicit memory.

Consumers' conceptualization of ultra-processed foods.

Science.gov (United States)

Ares, Gastón; Vidal, Leticia; Allegue, Gimena; Giménez, Ana; Bandeira, Elisa; Moratorio, Ximena; Molina, Verónika; Curutchet, María Rosa

2016-10-01

Consumption of ultra-processed foods has been associated with low diet quality, obesity and other non-communicable diseases. This situation makes it necessary to develop educational campaigns to discourage consumers from substituting meals based on unprocessed or minimally processed foods by ultra-processed foods. In this context, the aim of the present work was to investigate how consumers conceptualize the term ultra-processed foods and to evaluate if the foods they perceive as ultra-processed are in concordance with the products included in the NOVA classification system. An online study was carried out with 2381 participants. They were asked to explain what they understood by ultra-processed foods and to list foods that can be considered ultra-processed. Responses were analysed using inductive coding. The great majority of the participants was able to provide an explanation of what ultra-processed foods are, which was similar to the definition described in the literature. Most of the participants described ultra-processed foods as highly processed products that usually contain additives and other artificial ingredients, stressing that they have low nutritional quality and are unhealthful. The most relevant products for consumers' conceptualization of the term were in agreement with the NOVA classification system and included processed meats, soft drinks, snacks, burgers, powdered and packaged soups and noodles. However, some of the participants perceived processed foods, culinary ingredients and even some minimally processed foods as ultra-processed. This suggests that in order to accurately convey their message, educational campaigns aimed at discouraging consumers from consuming ultra-processed foods should include a clear definition of the term and describe some of their specific characteristics, such as the type of ingredients included in their formulation and their nutritional composition. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development of energy-efficient processes for natural gas liquids recovery

International Nuclear Information System (INIS)

Yoon, Sekwang; Binns, Michael; Park, Sangmin; Kim, Jin-Kuk

2017-01-01

A new NGL (natural gas liquids) recovery process configuration is proposed which can offer improved energy efficiency and hydrocarbon recovery. The new process configuration is an evolution of the conventional turboexpander processes with the introduction of a split stream transferring part of the feed to the demethanizer column. In this way additional heat recovery is possible which improves the energy efficiency of the process. To evaluate the new process configuration a number of different NGL recovery process configurations are optimized and compared using a process simulator linked interactively with external optimization methods. Process integration methodology is applied as part of the optimization to improve energy recovery during the optimization. Analysis of the new process configuration compared with conventional turbo-expander process designs demonstrates the benefits of the new process configuration. - Highlights: • Development of a new energy-efficient natural gas liquids recovery process. • Improving energy recovery with application of process integration techniques. • Considering multiple different structural changes lead to considerable energy savings.

Linking Neural and Symbolic Representation and Processing of Conceptual Structures

Directory of Open Access Journals (Sweden)

Frank van der Velde

2017-08-01

Full Text Available We compare and discuss representations in two cognitive architectures aimed at representing and processing complex conceptual (sentence-like structures. First is the Neural Blackboard Architecture (NBA, which aims to account for representation and processing of complex and combinatorial conceptual structures in the brain. Second is IDyOT (Information Dynamics of Thinking, which derives sentence-like structures by learning statistical sequential regularities over a suitable corpus. Although IDyOT is designed at a level more abstract than the neural, so it is a model of cognitive function, rather than neural processing, there are strong similarities between the composite structures developed in IDyOT and the NBA. We hypothesize that these similarities form the basis of a combined architecture in which the individual strengths of each architecture are integrated. We outline and discuss the characteristics of this combined architecture, emphasizing the representation and processing of conceptual structures.

Conceptual design study on advanced aqueous reprocessing system for fast reactor fuel cycle

International Nuclear Information System (INIS)

Takata, Takeshi; Koma, Yoshikazu; Sato, Koji; Kamiya, Masayoshi; Shibata, Atsuhiro; Nomura, Kazunori; Ogino, Hideki; Koyama, Tomozo; Aose, Shin-ichi

2003-01-01

As a feasibility study on commercialized fast reactor cycle system, a conceptual design study is being progressed for the aqueous and pyrochemical processes from the viewpoint of economical competitiveness, efficient utilization of resources, decreasing environmental impact and proliferation resistance in Japan Nuclear Cycle Development Institute (JNC). In order to meet above-mentioned requirements, the survey on a range of reprocessing technologies and the evaluation of conceptual plant designs against targets for the future fast reactor cycle system have been implemented as the fist phase of the feasibility study. For an aqueous reprocessing process, modification of the conventional PUREX process (a solvent extraction process with purification of U/Pu, with nor recovery of minor actinides (MA)) and investigation of alternatives for the PUREX process has been carried out and design study of advanced aqueous reprocessing system and its alternatives has been conducted. The conceptual design of the advanced aqueous reprocessing system has been updated and evaluated by the latest R and D results of the key technologies such as crystallization, single-cycle extraction, centrifugal contactors, recovery of Am/Cm and waste processing. In this paper, the outline of the design study and the current status of development for advanced aqueous reprocessing system, NEXT process, are mentioned. (author)

Recovery of transuranics from process residues

International Nuclear Information System (INIS)

Gray, J.H.; Gray, L.W.

1987-01-01

Process residues are generated at both the Rocky Flats Plant (RFP) and the Savannah River Plant (SRP) during aqueous chemical and pyrochemical operations. Frequently, process operations will result in either impure products or produce residues sufficiently contaminated with transuranics to be nondiscardable as waste. Purification and recovery flowsheets for process residues have been developed to generate solutions compatible with subsequent Purex operations and either solid or liquid waste suitable for disposal. The ''scrub alloy'' and the ''anode heel alloy'' are examples of materials generated at RFP which have been processed at SRP using the developed recovery flowsheets. Examples of process residues being generated at SRP for which flowsheets are under development include LECO crucibles and alpha-contaminated hydraulic oil

Uranium recovery from wet process phosphoric acid

International Nuclear Information System (INIS)

1980-01-01

In the field of metallurgy, specifically processes for recovering uranium from wet process phosphoric acid solution derived from the acidulation of uraniferous phosphate ores, problems of imbalance of ion exchange agents, contamination of recycled phosphoric acid with process organics and oxidizing agents, and loss and contamination of uranium product, are solved by removing organics from the raffinate after ion exchange conversion of uranium to uranous form and recovery thereof by ion exchange, and returning organics to the circuit to balance mono and disubstituted ester ion exchange agents; then oxidatively stripping uranium from the agent using hydrogen peroxide; then after ion exchange recovery of uranyl and scrubbing, stripping with sodium carbonate and acidifying the strip solution and using some of it for the scrubbing; regenerating the sodium loaded agent and recycling it to the uranous recovery step. Economic recovery of uranium as a by-product of phosphate fertilizer production is effected. (author)

Resource recovery from bio-based production processes: a future necessity?

DEFF Research Database (Denmark)

Mansouri, Seyed Soheil; S.B.A. Udugama, Isuru; Cignitti, Stefano

2017-01-01

The promise of transforming waste streams with small economic value into valuable products makes resource recovery technologies in bio-based production processes an attractive proposition. However, the use of resource recovery technologies in industrial applications is still minimal, despite its...... technologies to industrial bio-based production processes. The role and importance of economics, technology readiness and socio-environmental impacts of resource recovery in successfully implementing resource recovery technologies in industrial bio-based production processes is also discussed. Finally, based...... wide use in closely related processes such as dairy production. In this paper, a perspective on the role of resource recovery in bio-based production processes is provided through reviewing the past practice and identifying the benefits, opportunities and challenges of introducing resource recovery...

PERLE. Powerful energy recovery linac for experiments. Conceptual design report

Science.gov (United States)

Angal-Kalinin, D.; Arduini, G.; Auchmann, B.; Bernauer, J.; Bogacz, A.; Bordry, F.; Bousson, S.; Bracco, C.; Brüning, O.; Calaga, R.; Cassou, K.; Chetvertkova, V.; Cormier, E.; Daly, E.; Douglas, D.; Dupraz, K.; Goddard, B.; Henry, J.; Hutton, A.; Jensen, E.; Kaabi, W.; Klein, M.; Kostka, P.; Lasheras, N.; Levichev, E.; Marhauser, F.; Martens, A.; Milanese, A.; Militsyn, B.; Peinaud, Y.; Pellegrini, D.; Pietralla, N.; Pupkov, Y.; Rimmer, R.; Schirm, K.; Schulte, D.; Smith, S.; Stocchi, A.; Valloni, A.; Welsch, C.; Willering, G.; Wollmann, D.; Zimmermann, F.; Zomer, F.

2018-06-01

A conceptual design is presented of a novel energy-recovering linac (ERL) facility for the development and application of the energy recovery technique to linear electron accelerators in the multi-turn, large current and large energy regime. The main characteristics of the powerful energy recovery linac experiment facility (PERLE) are derived from the design of the Large Hadron electron Collider, an electron beam upgrade under study for the LHC, for which it would be the key demonstrator. PERLE is thus projected as a facility to investigate efficient, high current (HC) (>10 mA) ERL operation with three re-circulation passages through newly designed SCRF cavities, at 801.58 MHz frequency, and following deceleration over another three re-circulations. In its fully equipped configuration, PERLE provides an electron beam of approximately 1 GeV energy. A physics programme possibly associated with PERLE is sketched, consisting of high precision elastic electron–proton scattering experiments, as well as photo-nuclear reactions of unprecedented intensities with up to 30 MeV photon beam energy as may be obtained using Fabry–Perot cavities. The facility has further applications as a general technology test bed that can investigate and validate novel superconducting magnets (beam induced quench tests) and superconducting RF structures (structure tests with HC beams, beam loading and transients). Besides a chapter on operation aspects, the report contains detailed considerations on the choices for the SCRF structure, optics and lattice design, solutions for arc magnets, source and injector and on further essential components. A suitable configuration derived from the here presented design concept may next be moved forward to a technical design and possibly be built by an international collaboration which is being established.

Review of "Conceptual Structures: Information Processing in Mind and Machine."

Science.gov (United States)

Smoliar, Stephen W.

This review of the book, "Conceptual Structures: Information Processing in Mind and Machine," by John F. Sowa, argues that anyone who plans to get involved with issues of knowledge representation should have at least a passing acquaintance with Sowa's conceptual graphs for a database interface. (Used to model the underlying semantics of…

Conceptual information processing: A robust approach to KBS-DBMS integration

Science.gov (United States)

Lazzara, Allen V.; Tepfenhart, William; White, Richard C.; Liuzzi, Raymond

1987-01-01

Integrating the respective functionality and architectural features of knowledge base and data base management systems is a topic of considerable interest. Several aspects of this topic and associated issues are addressed. The significance of integration and the problems associated with accomplishing that integration are discussed. The shortcomings of current approaches to integration and the need to fuse the capabilities of both knowledge base and data base management systems motivates the investigation of information processing paradigms. One such paradigm is concept based processing, i.e., processing based on concepts and conceptual relations. An approach to robust knowledge and data base system integration is discussed by addressing progress made in the development of an experimental model for conceptual information processing.

A recovery journey for people with personality disorder.

Science.gov (United States)

Castillo, Heather; Ramon, Shulamit; Morant, Nicola

2013-05-01

The study investigates the process of recovery for people diagnosed with personality disorder, a client group that suffers significant social exclusion known to impact on demand for health and other public services. It aims to examine efforts that attempt to reverse this social exclusion as an aspect of the recovery process. and The following study aims to (1) explore what recovery means to people with personality disorder; (2) develop a conceptual model of recovery in personality disorder; and (3) evaluate the contribution of the setting (The Haven) to recovery practice. The study uses a Participatory Action Research (PAR) design. Data was collected from 66 participants by focus groups and individual interviews. A map based on thematic analysis of data collected during the study is proposed of the recovery journey for people with this diagnosis, shown as a pyramid that represents a hierarchy of progress, from building trust through stages of recovery to social inclusion. The findings offer contributions to knowledge in terms of the service design and propose a new model of recovery in personality disorder. This is defined as a journey of small steps highlighting recovery as a process rather than a goal, leading to the emergence of the new concept of transitional recovery.

Conceptualization, Cognitive Process between Image and Word

Directory of Open Access Journals (Sweden)

Aurel Ion Clinciu

2009-12-01

Full Text Available The study explores the process of constituting and organizing the system of concepts. After a comparative analysis of image and concept, conceptualization is reconsidered through raising for discussion the relations of concept with image in general and with self-image mirrored in body schema in particular. Taking into consideration the notion of mental space, there is developed an articulated perspective on conceptualization which has the images of mental space at one pole and the categories of language and operations of thinking at the other pole. There are explored the explicative possibilities of the notion of Tversky’s diagrammatic space as an element which is necessary to understand the genesis of graphic behaviour and to define a new construct, graphic intelligence.

CLINSULF sub-dew-point process for sulphur recovery

Energy Technology Data Exchange (ETDEWEB)

Heisel, M.; Marold, F.

1988-01-01

In a 2-reactor system, the CLINSULF process allows very high sulphur recovery rates. When operated at 100/sup 0/C at the outlet, i.e. below the sulphur solidification point, a sulphur recovery rate of more than 99.2% was achieved in a 2-reactor series. Assuming a 70% sulphur recovery in an upstream Claus furnace plus sulphur condenser, an overall sulphur recovery of more than 99.8% results for the 2-reactor system. This is approximately 2% higher than in conventional Claus plus SDP units, which mostly consist of 4 reactors or more. This means the the CLINSULF SSP process promises to be an improvement both in respect of efficiency and low investment cost.

Process-based reactive transport model to quantify arsenic mobility during aquifer storage and recovery of potable water.

Science.gov (United States)

Wallis, Ilka; Prommer, Henning; Pichler, Thomas; Post, Vincent; Norton, Stuart B; Annable, Michael D; Simmons, Craig T

2011-08-15

Aquifer storage and recovery (ASR) is an aquifer recharge technique in which water is injected in an aquifer during periods of surplus and withdrawn from the same well during periods of deficit. It is a critical component of the long-term water supply plan in various regions, including Florida, USA. Here, the viability of ASR as a safe and cost-effective water resource is currently being tested at a number of sites due to elevated arsenic concentrations detected during groundwater recovery. In this study, we developed a process-based reactive transport model of the coupled physical and geochemical mechanisms controlling the fate of arsenic during ASR. We analyzed multicycle hydrochemical data from a well-documented affected southwest Floridan site and evaluated a conceptual/numerical model in which (i) arsenic is initially released during pyrite oxidation triggered by the injection of oxygenated water (ii) then largely complexes to neo-formed hydrous ferric oxides before (iii) being remobilized during recovery as a result of both dissolution of hydrous ferric oxides and displacement from sorption sites by competing anions.

[An effect of semantic satiation in conceptual processing].

Science.gov (United States)

Takashi, Shimokido

2007-12-01

This study examined whether semantic satiation effects for a picture exemplar differ from a word exemplar. If massive repetition of the category name leads to an inhibition of conceptual processing, then semantic satiation effects would be found in both the word and picture exemplar conditions. However, if the repetition leads to an inhibition of lexical processing, then effects would be found for the word exemplar but not the picture exemplar. To examine these hypotheses, 48 college students were asked to judge whether a target pair of exemplars belonged to the same named category. The results showed that semantic satiation effects were found equally in both exemplar conditions. Moreover, the picture-superiority effect was intact regardless of the prime repetitions. The possibility was discussed that word and picture exemplars are integrated into an abstract and amodal conceptual unit; hence category judgment was affected by the satiation effect.

Emphasizing the process of science using demonstrations in conceptual chemistry

Science.gov (United States)

Lutz, Courtney A.

The purpose of this project was to teach students a method for employing the process of science in a conceptual chemistry classroom when observing a demonstration of a discrepant event. Students observed six demonstrations throughout a trimester study of chemistry and responded to each demonstration by asking as many questions as they could think of, choosing one testable question to answer by making as many hypotheses as possible, and choosing one hypothesis to make predictions about observed results of this hypothesis when tested. Students were evaluated on their curiosity, confidence, knowledge of the process of science, and knowledge of the nature of science before and after the six demonstrations. Many students showed improvement in using or mastery of the process of science within the context of conceptual chemistry after six intensive experiences with it. Results of the study also showed students gained confidence in their scientific abilities after completing one trimester of conceptual chemistry. Curiosity and knowledge of the nature of science did not show statistically significant improvement according to the assessment tool. This may have been due to the scope of the demonstration and response activities, which focused on the process of science methodology instead of knowledge of the nature of science or the constraints of the assessment tool.

The solvent absorption-extractive distillation (SAED) process for ethanol recovery from gas/vapor streams

Energy Technology Data Exchange (ETDEWEB)

Dale, M.C.

1993-12-31

A low energy system for ethanol recovery and dehydration has been developed. This system utilizes a solvent for (1) absorption of ethanol vapors, and then the same solvent for (2) extractive distillation. The ideal solvent for this process would have a high affinity for ethanol, and no affinity for water. Heavy alcohols such as dodecanol, and tridecanol, some phosphorals, and some fatty acids have been determined to meet the desired specifications. These solvents have the effect of making water more volatile than ethanol. Thus, a water stream is taken off initially in the dehydration column, and a near anhydrous ethanol stream is recovered from the ethanol/solvent stripper column. Thus the solvent serves dual uses (1) absorption media, and (2) dehydration media. The SAED process as conceptualized would use a solvent similar to solvents used for direct extractive separation of ethanol from aqueous ethanol solutions.

The Linguistic and Embodied Nature of Conceptual Processing

Science.gov (United States)

Louwerse, Max M.; Jeuniaux, Patrick

2010-01-01

Recent theories of cognition have argued that embodied experience is important for conceptual processing. Embodiment can be contrasted with linguistic factors such as the typical order in which words appear in language. Here, we report four experiments that investigated the conditions under which embodiment and linguistic factors determine…

Deficiency tracking system, conceptual business process requirements

International Nuclear Information System (INIS)

Hermanson, M.L.

1997-01-01

The purpose of this document is to describe the conceptual business process requirements of a single, site-wide, consolidated, automated, deficiency management tracking, trending, and reporting system. This description will be used as the basis for the determination of the automated system acquisition strategy including the further definition of specific requirements, a ''make or buy'' determination and the development of specific software design details

Individual psychotherapy for schizophrenia: trends and developments in the wake of the recovery movement.

Science.gov (United States)

Hamm, Jay A; Hasson-Ohayon, Ilanit; Kukla, Marina; Lysaker, Paul H

2013-01-01

Although the role and relative prominence of psychotherapy in the treatment of schizophrenia has fluctuated over time, an analysis of the history of psychotherapy for schizophrenia, focusing on findings from the recovery movement, reveals recent trends including the emergence of the development of integrative psychotherapy approaches. The authors suggest that the recovery movement has revealed limitations in traditional approaches to psychotherapy, and has provided opportunities for integrative approaches to emerge as a mechanism for promoting recovery in persons with schizophrenia. Five approaches to integrative psychotherapy for persons with schizophrenia are presented, and a shared conceptual framework that allows these five approaches to be compatible with one another is proposed. The conceptual framework is consistent with theories of recovery and emphasizes interpersonal attachment, personal narrative, and metacognitive processes. Implications for future research on integrative psychotherapy are considered.

Individual psychotherapy for schizophrenia: trends and developments in the wake of the recovery movement

Science.gov (United States)

Hamm, Jay A; Hasson-Ohayon, Ilanit; Kukla, Marina; Lysaker, Paul H

2013-01-01

Although the role and relative prominence of psychotherapy in the treatment of schizophrenia has fluctuated over time, an analysis of the history of psychotherapy for schizophrenia, focusing on findings from the recovery movement, reveals recent trends including the emergence of the development of integrative psychotherapy approaches. The authors suggest that the recovery movement has revealed limitations in traditional approaches to psychotherapy, and has provided opportunities for integrative approaches to emerge as a mechanism for promoting recovery in persons with schizophrenia. Five approaches to integrative psychotherapy for persons with schizophrenia are presented, and a shared conceptual framework that allows these five approaches to be compatible with one another is proposed. The conceptual framework is consistent with theories of recovery and emphasizes interpersonal attachment, personal narrative, and metacognitive processes. Implications for future research on integrative psychotherapy are considered. PMID:23950665

The origins of levels-of-processing effects in a conceptual test: evidence for automatic influences of memory from the process-dissociation procedure.

Science.gov (United States)

Bergerbest, Dafna; Goshen-Gottstein, Yonatan

2002-12-01

In three experiments, we explored automatic influences of memory in a conceptual memory task, as affected by a levels-of-processing (LoP) manipulation. We also explored the origins of the LoP effect by examining whether the effect emerged only when participants in the shallow condition truncated the perceptual processing (the lexical-processing hypothesis) or even when the entire word was encoded in this condition (the conceptual-processing hypothesis). Using the process-dissociation procedure and an implicit association-generation task, we found that the deep encoding condition yielded higher estimates of automatic influences than the shallow condition. In support of the conceptual processing hypothesis, the LoP effect was found even when the shallow task did not lead to truncated processing of the lexical units. We suggest that encoding for meaning is a prerequisite for automatic processing on conceptual tests of memory.

Conceptual Change in Elementary School Teacher Candidate Knowledge of Rock-Cycle Processes.

Science.gov (United States)

Stofflett, Rene Therese

1994-01-01

Investigates the knowledge of elementary school teacher candidates on rock-cycle processes. Three different instructional interventions were used to improve their knowledge: (1) conceptual-change teaching; (2) traditional didactic teaching; and (3) microteaching. The conceptual-change group showed the most growth in understanding, supporting…

Personality and recovery: integrating personality assessment data to facilitate the recovery process.

Science.gov (United States)

Donat, D C

2001-01-01

The relatively enduring and persistent nature of personality traits means that they will likely continue to impact the course of psychiatric recovery after Axis I symptoms are stabilized. These traits can significantly impact the choices that recovering persons make and the quality of interpersonal relationships with care providers who are trying to facilitate the recovery process. Despite this, they are often inadequately assessed and considered in providing psychiatric care. This manuscript reviews the common combinations of personality traits that have emerged across a variety of clinical samples. The implications of these personality features for the provision of care in an inpatient setting to facilitate recovery are discussed.

Integration of Individual Processes and Information Demand Patterns: A Conceptual Analysis

Directory of Open Access Journals (Sweden)

Michael Leyer

2017-12-01

Full Text Available Individuals need a variety of information when performing their personal processes. However, companies typically know little about the underlying individual demand patterns in these processes. Conceptualizing information demand patterns of individuals is expected to allow for using these as foundation to extend the traditional internal information logistic perspective of companies. Digital options could then be used to align individual and organizational information leading not only to new product and service offers, but also to new work structures in organizations. Thus, we extend prior literature regarding business process management and information logistics by highlighting how information demand patterns (IDP have to be adapted to individual processes. Our exploratory approach is to demonstrate conceptually the conditions and implications of individual IDPs.

The Recovery Knowledge Inventory for Measurement of Nursing Student Views on Recovery-oriented Mental Health Services.

Science.gov (United States)

Happell, Brenda; Byrne, Louise; Platania-Phung, Chris

2015-01-01

Recovery-oriented services are a goal for policy and practice in the Australian mental health service system. Evidence-based reform requires an instrument to measure knowledge of recovery concepts. The Recovery Knowledge Inventory (RKI) was designed for this purpose, however, its suitability and validity for student health professionals has not been evaluated. The purpose of the current article is to report the psychometric features of the RKI for measuring nursing students' views on recovery. The RKI, a self-report measure, consists of four scales: (I) Roles and Responsibilities, (II) Non-Linearity of the Recovery Process, (III) Roles of Self-Definition and Peers, and (IV) Expectations Regarding Recovery. Confirmatory and exploratory factor analyses of the baseline data (n = 167) were applied to assess validity and reliability. Exploratory factor analyses generally replicated the item structure suggested by the three main scales, however more stringent analyses (confirmatory factor analysis) did not provide strong support for convergent validity. A refined RKI with 16 items had internal reliabilities of α = .75 for Roles and Responsibilities, α = .49 for Roles of Self-Definition and Peers, and α = .72, for Recovery as Non-Linear Process. If the RKI is to be applied to nursing student populations, the conceptual underpinning of the instrument needs to be reworked, and new items should be generated to evaluate and improve scale validity and reliability.

Deficiency tracking system, conceptual business process requirements

Energy Technology Data Exchange (ETDEWEB)

Hermanson, M.L.

1997-04-18

The purpose of this document is to describe the conceptual business process requirements of a single, site-wide, consolidated, automated, deficiency management tracking, trending, and reporting system. This description will be used as the basis for the determination of the automated system acquisition strategy including the further definition of specific requirements, a ''make or buy'' determination and the development of specific software design details.

Conceptual and epistemological undercurrents of learning as a process of change

Science.gov (United States)

Montfort, Devlin B.

2011-12-01

In the preparation and education of civil engineers it is essential to both increase student knowledge of the world (conceptual understanding), but also to establish and develop new ways of thinking (epistemology). Both of these processes of change can be considered learning, but they are vastly different in the time, energy and resources they require to accomplish. The second type of learning (conceptual change) is more difficult, and is only rarely accomplished in traditional university education. The purpose of this research is to apply existing research approaches from cognitive science and educational psychology to explain why by investigating conceptual change in the contexts of student learning and faculty adoption of new pedagogies. In each context, the difficulty with conceptual change was associated with the ways in which people categorize fundamental phenomena in the world around them, and with epistemological expectations of how those categorizations should be applied in new contexts. While attempts to encourage change often focus on "educating" people by providing them with more knowledge, the change processes seem to be primarily limited by people's existing knowledge and how it is structured. Because civil engineers interact closely with societal goals and processes (such as human safety and environmental policies), they adopt epistemological stances that are as-yet unaccounted for in most research on the subject, which assumes a strong distinction between epistemological stances toward the physical world compared to the social world. These differences suggest that civil engineers' conceptual change could be enhanced by more directly addressing their particular epistemological stances---which incorporate high needs for certainty in guaranteeing human safety, as well as high flexibility when being applied to human systems.

Implied Spatial Meaning and Visuospatial Bias: Conceptual Processing Influences Processing of Visual Targets and Distractors.

Directory of Open Access Journals (Sweden)

Davood G Gozli

Full Text Available Concepts with implicit spatial meaning (e.g., "hat", "boots" can bias visual attention in space. This result is typically found in experiments with a single visual target per trial, which can appear at one of two locations (e.g., above vs. below. Furthermore, the interaction is typically found in the form of speeded responses to targets appearing at the compatible location (e.g., faster responses to a target above fixation, after reading "hat". It has been argued that these concept-space interactions could also result from experimentally-induced associations between the binary set of locations and the conceptual categories with upward and downward meaning. Thus, rather than reflecting a conceptually driven spatial bias, the effect could reflect a benefit for compatible cue-target sequences that occurs only after target onset. We addressed these concerns by going beyond a binary set of locations and employing a search display consisting of four items (above, below, left, and right. Within each search trial, before performing a visual search task, participants performed a conceptual task involving concepts with implicit upward or downward meaning. The search display, in addition to including a target, could also include a salient distractor. Assuming a conceptually driven visual bias, we expected to observe, first, a benefit for target processing at the compatible location and, second, an increase in the cost of the salient distractor. The findings confirmed both predictions, suggesting that concepts do indeed generate a spatial bias. Finally, results from a control experiment, without the conceptual task, suggest the presence of an axis-specific effect, in addition to the location-specific effect, suggesting that concepts might cause both location-specific and axis-specific spatial bias. Taken together, our findings provide additional support for the involvement of spatial processing in conceptual understanding.

Integrating conceptualizations of experience into the interaction design process

DEFF Research Database (Denmark)

Dalsgaard, Peter

2010-01-01

From a design perspective, the increasing awareness of experiential aspects of interactive systems prompts the question of how conceptualizations of experience can inform and potentially be integrated into the interaction design process. This paper presents one approach to integrating theoretical...

Use of polymers in oil recovery processes

Energy Technology Data Exchange (ETDEWEB)

Stanislav, J.F.

Water-soluble polymers are used extensively in various stages of gas and oil production operations, typical examples being enhanced oil recovery, water production control, and well drilling. A variety of polymetric materials, both naturally occurring and synthetic ones, are currently used; guar and cellulose derivatives, xanthan gum, polysaccharides, polyacrylamides and others. In this work, only the application of polymeric materials to enhanced recovery processes is discussed.

Integrated HLW Conceptual Process Flowsheet(s) for the Crystalline Silicotitanate Process SRDF-98-04

International Nuclear Information System (INIS)

Jacobs, R.A.

1998-01-01

The Strategic Research and Development Fund (SRDF) provided funds to develop integrated conceptual flowsheets and material balances for a CST process as a potential replacement for, or second generation to, the ITP process. This task directly supports another SRDF task: Glass Form for HLW Sludge with CST, SRDF-98-01, by M. K. Andrews which seeks to further develop sludge/CST glasses that could be used if the ITP process were replaced by CST ion exchange. The objective of the proposal was to provide flowsheet support for development and evaluation of a High Level Waste Division process to replace ITP. The flowsheets would provide a conceptual integrated material balance showing the impact on the HLW division. The evaluation would incorporate information to be developed by Andrews and Harbour on CST/DWPF glass formulations and provide the bases for evaluating the economic impact of the proposed replacement process. Coincident with this study, the Salt Disposition Team began its evaluation of alternatives for disposition of the HLW salts in the SRS waste tanks. During that time, the CST IX process was selected as one of four alternatives (of eighteen Phase II alternatives) for further evaluation during Phase III

Waste heat and water recovery opportunities in California tomato paste processing

International Nuclear Information System (INIS)

Amón, Ricardo; Maulhardt, Mike; Wong, Tony; Kazama, Don; Simmons, Christopher W.

2015-01-01

Water and energy efficiency are important for the vitality of the food processing industry as demand for these limited resources continues to increase. Tomato processing, which is dominated by paste production, is a major industry in California – where the majority of tomatoes are processed in the United States. Paste processing generates large amounts of condensate as moisture is removed from the fruit. Recovery of the waste heat in this condensate and reuse of the water may provide avenues to decrease net energy and water use at processing facilities. However, new processing methods are needed to create demand for the condensate waste heat. In this study, the potential to recover condensate waste heat and apply it to the tomato enzyme thermal inactivation processing step (the hot break) is assessed as a novel application. A modeling framework is established to predict heat transfer to tomatoes during the hot break. Heat recovery and reuse of the condensate water are related to energy and monetary savings gained through decreased use of steam, groundwater pumping, cooling towers, and wastewater processing. This analysis is informed by water and energy usage data from relevant unit operations at a commercial paste production facility. The case study indicates potential facility seasonal energy and monetary savings of 7.3 GWh and $166,000, respectively, with most savings gained through reduced natural gas use. The sensitivity of heat recovery to various process variables associated with heat exchanger design and processing conditions is presented to identify factors that affect waste heat recovery. - Highlights: • The potential to recovery waste heat in tomato paste processing is examined. • Heat transfer from evaporator condensate to tomatoes in the hot break is modeled. • Processing facility data is used in model to predict heat recovery energy savings. • The primary benefit of heat recovery is reduced use of natural gas in boilers. • Reusing

Complex processing of rubber waste through energy recovery

Directory of Open Access Journals (Sweden)

Roman Smelík

2015-12-01

Full Text Available This article deals with the applied energy recovery solutions for complex processing of rubber waste for energy recovery. It deals specifically with the solution that could maximize possible use of all rubber waste and does not create no additional waste that disposal would be expensive and dangerous for the environment. The project is economically viable and energy self-sufficient. The outputs of the process could replace natural gas and crude oil products. The other part of the process is also the separation of metals, which can be returned to the metallurgical secondary production.

The relation between resource limitations and optional conceptual processing by children and adults.

Science.gov (United States)

Ackerman, B P; Spiker, K; Bailey, K

1989-10-01

In some situations children fail to perform optional conceptual processing that they are able to perform. The purpose of the 4 experiments was to determine if the difficulty of word identification affects optional conceptual processing by second/third graders, fifth graders, and college students in a cued recall task. Conceptual processing was manipulated by presenting Hard (e.g., hawk eagle canary) or Easy (river lake canary) word triplets that varied in the contrastive processing necessary to identify the "odd" target word (canary). The orienting activity also varied: for the Oddity Choice activity, contrastive processing was obligatory because the subject had to identify the target; for the Read activity, contrastive processing was optional because the experimenter identified the target. A recall advantage for the Hard over the Easy triplets was the measure of contrastive processing. Finally, the difficulty of word identification varied in that the subjects read the stimuli or the experimenter read the stimuli, and all the words were degraded, only the nontarget words were degraded, or all the words were intact. The results established that contrastive processing facilitates recall, and that word identification difficulty may limit the extent of optional contrastive processing.

Examining young children's conceptual change process in floating and sinking from a social constructivist perspective

Science.gov (United States)

Havu-Nuutinen, Sari

2005-03-01

This paper presents a case study of the process of conceptual change in six-year-old children. The process of conceptual change in learning about floating and sinking is described from two different viewpoints: how the children's conceptions change during the instructional process, and how the social discussion during the experimental exploration can be seen in terms of the cognitive changes in the children. Based on qualitative analysis of verbal data, changes in the children's conceptions were mostly epistemological and the children's theories of flotation became more complete with respect to the scientific view. From the viewpoint of the conceptual change, conceptually orientated teacher-child interactions seemed to support the children's cognitive progress in cognitive skills and guided the children to consider the reasons for the flotation.

Development and Optimization of Gas-Assisted Gravity Drainage (GAGD) Process for Improved Light Oil Recovery

Energy Technology Data Exchange (ETDEWEB)

Dandina N. Rao; Subhash C. Ayirala; Madhav M. Kulkarni; Wagirin Ruiz Paidin; Thaer N. N. Mahmoud; Daryl S. Sequeira; Amit P. Sharma

2006-09-30

This is the final report describing the evolution of the project ''Development and Optimization of Gas-Assisted Gravity Drainage (GAGD) Process for Improved Light Oil Recovery'' from its conceptual stage in 2002 to the field implementation of the developed technology in 2006. This comprehensive report includes all the experimental research, models developments, analyses of results, salient conclusions and the technology transfer efforts. As planned in the original proposal, the project has been conducted in three separate and concurrent tasks: Task 1 involved a physical model study of the new GAGD process, Task 2 was aimed at further developing the vanishing interfacial tension (VIT) technique for gas-oil miscibility determination, and Task 3 was directed at determining multiphase gas-oil drainage and displacement characteristics in reservoir rocks at realistic pressures and temperatures. The project started with the task of recruiting well-qualified graduate research assistants. After collecting and reviewing the literature on different aspects of the project such gas injection EOR, gravity drainage, miscibility characterization, and gas-oil displacement characteristics in porous media, research plans were developed for the experimental work to be conducted under each of the three tasks. Based on the literature review and dimensional analysis, preliminary criteria were developed for the design of the partially-scaled physical model. Additionally, the need for a separate transparent model for visual observation and verification of the displacement and drainage behavior under gas-assisted gravity drainage was identified. Various materials and methods (ceramic porous material, Stucco, Portland cement, sintered glass beads) were attempted in order to fabricate a satisfactory visual model. In addition to proving the effectiveness of the GAGD process (through measured oil recoveries in the range of 65 to 87% IOIP), the visual models demonstrated

Empowering production workers with digitally facilitated knowledge processes--a conceptual framework

DEFF Research Database (Denmark)

Hannola, Lea; Richter, Alexander; Richter, Shahper

2018-01-01

proposes a conceptual framework for empowering workers in industrial production environments with digitally facilitated knowledge management processes. The framework explores four concrete facets of digital advancements that apply to a wide range of knowledge processes and production strategies...

Membrane-based processes for wastewater nutrient recovery: Technology, challenges, and future direction.

Science.gov (United States)

Xie, Ming; Shon, Ho Kyong; Gray, Stephen R; Elimelech, Menachem

2016-02-01

Wastewater nutrient recovery holds promise for more sustainable water and agricultural industries. We critically review three emerging membrane processes - forward osmosis (FO), membrane distillation (MD) and electrodialysis (ED) - that can advance wastewater nutrient recovery. Challenges associated with wastewater nutrient recovery were identified. The advantages and challenges of applying FO, MD, and ED technologies to wastewater nutrient recovery are discussed, and directions for future research and development are identified. Emphasis is given to exploration of the unique mass transfer properties of these membrane processes in the context of wastewater nutrient recovery. We highlight that hybridising these membrane processes with existing nutrient precipitation process will lead to better management of and more diverse pathways for near complete nutrient recovery in wastewater treatment facilities. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Process of Divorce Recovery: A Review of the Research.

Science.gov (United States)

Gastil, Richard W.

Many researchers have speculated over the nature of the divorce recovery process. Is the process similar to Kubler-Ross's stages of grief or does divorce recovery follow a unique process? This paper examines the current body of empirical research in an attempt to answer these questions. From the 91 sources analyzed, it was discovered that most of…

Poststroke Trajectories: The Process of Recovery Over the Longer Term Following Stroke.

Science.gov (United States)

Hawkins, Rebecca J; Jowett, Adam; Godfrey, Mary; Mellish, Kirste; Young, John; Farrin, Amanda; Holloway, Ivana; Hewison, Jenny; Forster, Anne

2017-01-01

We adopted a grounded theory approach to explore the process of recovery experienced by stroke survivors over the longer term who were living in the community in the United Kingdom, and the interacting factors that are understood to have shaped their recovery trajectories. We used a combination of qualitative methods. From the accounts of 22 purposively sampled stroke survivors, four different recovery trajectories were evident: (a) meaningful recovery, (b) cycles of recovery and decline, (c) ongoing disruption, (d) gradual, ongoing decline. Building on the concept of the illness trajectory, our findings demonstrate how multiple, interacting factors shape the process and meaning of recovery over time. Such factors included conception of recovery and meanings given to the changing self, the meanings and consequences of health and illness experiences across the life course, loss, sense of agency, and enacting relationships. Awareness of the process of recovery will help professionals better support stroke survivors.

Exploring identity within the recovery process of people with serious mental illnesses.

Science.gov (United States)

Buckley-Walker, Kellie; Crowe, Trevor; Caputi, Peter

2010-01-01

To examine self-identity within the recovery processes of people with serious mental illnesses using a repertory grid methodology. Cross-sectional study involving 40 mental health service consumers. Participants rated different "self" and "other" elements on the repertory grid against constructs related to recovery, as well as other recovery focused measures. Perceptions of one's "ideal self" represented more advanced recovery in contrast to perceptions of "a person mentally unwell." Current perceptions of self were most similar to perceptions of "usual self" and least similar to "a person who is mentally unwell." Increased identification with one's "ideal self" reflected increased hopefulness in terms of recovery. The recovery repertory grid shows promise in clinical practice, in terms of exploring identity as a key variable within mental health recovery processes. Distance measures of similarity between various self-elements, including perceptions of others, maps logically against the recovery process of hope.

The role of complaint management in the service recovery process.

Science.gov (United States)

Bendall-Lyon, D; Powers, T L

2001-05-01

Patient satisfaction and retention can be influenced by the development of an effective service recovery program that can identify complaints and remedy failure points in the service system. Patient complaints provide organizations with an opportunity to resolve unsatisfactory situations and to track complaint data for quality improvement purposes. Service recovery is an important and effective customer retention tool. One way an organization can ensure repeat business is by developing a strong customer service program that includes service recovery as an essential component. The concept of service recovery involves the service provider taking responsive action to "recover" lost or dissatisfied customers and convert them into satisfied customers. Service recovery has proven to be cost-effective in other service industries. The complaint management process involves six steps that organizations can use to influence effective service recovery: (1) encourage complaints as a quality improvement tool; (2) establish a team of representatives to handle complaints; (3) resolve customer problems quickly and effectively; (4) develop a complaint database; (5) commit to identifying failure points in the service system; and (6) track trends and use information to improve service processes. Customer retention is enhanced when an organization can reclaim disgruntled patients through the development of effective service recovery programs. Health care organizations can become more customer oriented by taking advantage of the information provided by patient complaints, increasing patient satisfaction and retention in the process.

Conceptual structures: Information processing in mind and machine

Energy Technology Data Exchange (ETDEWEB)

Sowa, J.F.

1983-01-01

The broad coverage in this book combines material from philosophy, linguistics, psychology, and artificial intelligence. As a unifying force, the book focuses on conceptual graphs - networks of concepts and conceptual relations developed over the past twenty years. Important topics include: philosophical issues of knowledge and meaning; cognitive psychology in relation to linguistics and artificial intelligence; conceptual graphs as a knowledge representation language; applications for formal logic, plausible reasoning, heuristics, and computation; natural language parsing, generation, and pragmatics; knowledge-based systems, conceptual analysis, and database design and query; limits of conceptualization and unsolved problems. To accommodate readers from various disciplines, this book is designed to be read at different levels. Contents: Philosophical basis; Psychological evidence; Conceptual graphs; Reasoning and computation; Language; Knowledge engineering; Epilog; Limits of conceptualization; Appendices; Index.

Processing of spent nickelcatalyst for fat recovery

Directory of Open Access Journals (Sweden)

NASIR Mohammad Ibraim

2001-01-01

Full Text Available Spent nickel catalyst (SNC has the potential of insulting the quality of the environment in a number of ways. Its disposal has a pollution effect. Optimum recovery of fat from SNC, could save the environment and reduce the oil loss. Hexane has been the solvent of choice for oil extraction. Alternative solvents considered to have been safer have been evaluated. Hexane, isopropanol, ethanol and heptane were examined using soxhlet extraction. While hexane is more efficient in oil recovery from SNC, isopropanol proved to be very good in clear separation of oil from waste material and also provides high solvent recovery compared to other solvents. Isopropanol extraction with chill separation of miscella into lower oil-rich phase, and an upper, solvent-rich recyclable phase save mush energy of vaporization for distilling. An aqueous extraction process with immiscible solvent assisted was tested. Solvent like hexane added to SNC, and water added later with continuous stirring. The mixture was stirred for about 30 minutes, prior to centrifugation. Aqueous process extracted less amount of oil compared to solvent extraction.

Investigating the mixture and subdivision of perceptual and conceptual processing in Japanese memory tests.

Science.gov (United States)

Gabeza, R

1995-03-01

The dual nature of the Japanese writing system was used to investigate two assumptions of the processing view of memory transfer: (1) that both perceptual and conceptual processing can contribute to the same memory test (mixture assumption) and (2) that both can be broken into more specific processes (subdivision assumption). Supporting the mixture assumption, a word fragment completion test based on ideographic kanji characters (kanji fragment completion test) was affected by both perceptual (hiragana/kanji script shift) and conceptual (levels-of-processing) study manipulations kanji fragments, because it did not occur with the use of meaningless hiragana fragments. The mixture assumption is also supported by an effect of study script on an implicit conceptual test (sentence completion), and the subdivision assumption is supported by a crossover dissociation between hiragana and kanji fragment completion as a function of study script.

The picture superiority effect in conceptual implicit memory: a conceptual distinctiveness hypothesis.

Science.gov (United States)

Hamilton, Maryellen; Geraci, Lisa

2006-01-01

According to leading theories, the picture superiority effect is driven by conceptual processing, yet this effect has been difficult to obtain using conceptual implicit memory tests. We hypothesized that the picture superiority effect results from conceptual processing of a picture's distinctive features rather than a picture's semantic features. To test this hypothesis, we used 2 conceptual implicit general knowledge tests; one cued conceptually distinctive features (e.g., "What animal has large eyes?") and the other cued semantic features (e.g., "What animal is the figurehead of Tootsie Roll?"). Results showed a picture superiority effect only on the conceptual test using distinctive cues, supporting our hypothesis that this effect is mediated by conceptual processing of a picture's distinctive features.

HYBRID SULFUR RECOVERY PROCESS FOR NATURAL GAS UPGRADING

International Nuclear Information System (INIS)

Girish Srinivas; Steven C. Gebhard; David W. DeBerry

2001-01-01

This first quarter report of 2001 describes progress on a project funded by the U.S. Department of Energy (DOE) to test a hybrid sulfur recovery process for natural gas upgrading. The process concept represents a low cost option for direct treatment of natural gas streams to remove H(sub 2)S in quantities equivalent to 0.2-25 metric tons (LT) of sulfur per day. This process is projected to have lower capital and operating costs than the competing technologies, amine/aqueous iron liquid redox and amine/Claus/tail gas treating, and have a smaller plant footprint, making it well suited to both on-shore and offshore applications. CrystaSulf(trademark) (service mark of Gas Research Institute) is a new nonaqueous sulfur recovery process that removes hydrogen sulfide (H(sub 2)S) from gas streams and converts it into elemental sulfur. CrystaSulf features high sulfur recovery similar to aqueous-iron liquid redox sulfur recovery processes, but differs from the aqueous processes in that CrystaSulf controls the location where elemental sulfur particles are formed. In the hybrid process, approximately 1/3 of the total H(sub 2)S in the natural gas is first oxidized to SO(sub 2) at low temperatures over a heterogeneous catalyst. Low temperature oxidation is done so that the H(sub 2)S can be oxidized in the presence of methane and other hydrocarbons without oxidation of the hydrocarbons. The project involves the development of a catalyst using laboratory/bench-scale catalyst testing, and then demonstration of the catalyst at CrystaTech's pilot plant in west Texas. During this reporting periods new catalyst formulations were tested. The experiments showed that the newest catalyst has slightly better performance, but catalyst TDA No.2 is still superior overall for use with the hybrid CrystaSulf process due to lower costs. Plans for catalyst pelletization and continued testing are described

A process for uranium recovery in phosphoric acid

International Nuclear Information System (INIS)

Duarte Neto, J.

1984-01-01

Results are presented about studies carried out envisaging the development of a process for uranium recovery from phosphoric acid, produced from the concentrate obtained from phosphorus-uraniferous mineral from Itataia mines (CE, Brazil). This process uses a mixture of DEPA-TOPO as extractant and the extraction cycle involves the following stages: acid pre-treatment; adjustment of the oxidation potential so to ensure that all uranium is hexavalent; extraction of uranium from the acid; screening of the solvent to remove undesirable impurities; uranium re-extraction and precipitation; solvent recovery. A micro-pilot plant for continuous processing was built up. Data collected showed that uranium can be recovered with an yield greater than 99%, thus proving the feasibility of the process and encouraging the construction of a bigger scale plant. (Author) [pt

Conceptual design of distillation-based hybrid separation processes.

Science.gov (United States)

Skiborowski, Mirko; Harwardt, Andreas; Marquardt, Wolfgang

2013-01-01

Hybrid separation processes combine different separation principles and constitute a promising design option for the separation of complex mixtures. Particularly, the integration of distillation with other unit operations can significantly improve the separation of close-boiling or azeotropic mixtures. Although the design of single-unit operations is well understood and supported by computational methods, the optimal design of flowsheets of hybrid separation processes is still a challenging task. The large number of operational and design degrees of freedom requires a systematic and optimization-based design approach. To this end, a structured approach, the so-called process synthesis framework, is proposed. This article reviews available computational methods for the conceptual design of distillation-based hybrid processes for the separation of liquid mixtures. Open problems are identified that must be addressed to finally establish a structured process synthesis framework for such processes.

Recovery process of elite athletes: A review of contemporary methods

Directory of Open Access Journals (Sweden)

Veljović Draško

2012-01-01

Full Text Available A numerous training stimulus and competition as well can reduce level of abilities among athletes. This decline of performance can be a temporary phenomenon, with duration of several minutes or several hours after a workout, or take much longer, even a several days. The lack of adequate recovery process can influence on athletes not being able to train at the desired intensity or do not fully meet the tasks at the next training session. Chronic fatigue can lead to injuries, and therefore, full recovery is necessary for achieving optimal level of abilities that will ensure a better athletic performance. For this reasons, athletes often carry out a variety of techniques and methods aimed to recover after training or match. They have become a part of the training process and their purpose is reduction of stress and fatigue incurred as a result of daily exposure to intense training stimulus. There are numerous methods and techniques today that can accelerate the recovery process of athletes. For this reason it is necessary to know the efficiency of an adequate method which will be applied in the training process. The aim of this review article is to point to those currently used and their effects on the process of recovery after physical activity in elite sport.

Promoting information diffusion through interlayer recovery processes in multiplex networks

Science.gov (United States)

Wang, Xin; Li, Weihua; Liu, Longzhao; Pei, Sen; Tang, Shaoting; Zheng, Zhiming

2017-09-01

For information diffusion in multiplex networks, the effect of interlayer contagion on spreading dynamics has been explored in different settings. Nevertheless, the impact of interlayer recovery processes, i.e., the transition of nodes to stiflers in all layers after they become stiflers in any layer, still remains unclear. In this paper, we propose a modified ignorant-spreader-stifler model of rumor spreading equipped with an interlayer recovery mechanism. We find that the information diffusion can be effectively promoted for a range of interlayer recovery rates. By combining the mean-field approximation and the Markov chain approach, we derive the evolution equations of the diffusion process in two-layer homogeneous multiplex networks. The optimal interlayer recovery rate that achieves the maximal enhancement can be calculated by solving the equations numerically. In addition, we find that the promoting effect on a certain layer can be strengthened if information spreads more extensively within the counterpart layer. When applying the model to two-layer scale-free multiplex networks, with or without degree correlation, similar promoting effect is also observed in simulations. Our work indicates that the interlayer recovery process is beneficial to information diffusion in multiplex networks, which may have implications for designing efficient spreading strategies.

Conditioning of red mud for subsequent titanium and scandium recovery. A conceptual design study

Energy Technology Data Exchange (ETDEWEB)

Alkan, G.; Xakalashe, B.; Kaussen, F.; Friedrich, Bernd [RWTH Aachen Univ. (Germany). IME Inst. of Process Metallurgy and Metal Recycling; Yagmurlu, B. [RWTH Aachen Univ. (Germany). IME Inst. of Process Metallurgy and Metal Recycling; MEAB Chemie Technik GmbH, Aachen (Germany)

2017-03-15

Leaching experiments were undertaken on red mud materials (red mud and red mud slag). The red mud slag was produced via the carbothermic reduction of red mud at high temperatures (T > 1500 C) via SAF treatment. Furthermore, iron was recovered in the smelting step to the metal phase. Ti and Sc were successfully recovered from the red mud materials by hydrometallurgical treatment. For both critical metals, it was found that sulfuric acid was the best mineral acid among others. Since direct red mud leaching had some shortcomings, a route designed to overcome them is proposed. For optimal Ti and Sc recovery from red mud a promising process flowsheet combining pyrometallurgical and hydrometallurgical treatment is proposed as follows: pyrometallurgical processing (fluxed smelting to produce calcium oxide based slag phases and controlled cooling for crystalline and glassy slags), leaching for maximized Ti- and Sc extraction and followed by a multistage precipitation (for metal recovery and solution purification). Initial trial results showed that the proposed process is promising.

Adaptive versus proactive behavior in service recovery: The role of self-managing teams

NARCIS (Netherlands)

Jong, de A.; Ruyter, de J.C.

2004-01-01

In this article, we develop a conceptual model of adaptive versus proactive recovery behavior by self-managing teams (SMTs) in service recovery operations. To empirically test the conceptual model a combination of bank employee, customer, and archival data is collected. The results demonstrate

Illness Insight and Recovery: How Important is Illness Insight in Peoples’ Recovery Process?

DEFF Research Database (Denmark)

Korsbek, Lisa

2013-01-01

. Sources Used:The writing is based on research literature related to illness insight and on personal recovery experiences.Conclusions and Implications for Practice: It is helpful to consider the integration of the issue of illness insight when addressing the questions and consequences of diagnosis......Topic: This account reflects on the topic of illness insight and recovery. Purpose: The purpose of the account is to clarify our understanding about the importance of illness insight in peoples’ recovery process, especially when relating the question of illness insight to the question of identity......, and to assist individuals to work through the false analogy between illness and identity while supporting the transformation from patient to person. It is also necessary for clinicians to develop a clear understanding of peoples’ actual needs and gain more knowledge about peoples’ own views and experiences...

Complementary Therapies – a spiritual resource in recovery-processes?

DEFF Research Database (Denmark)

Lunde, Anita; Dürr, Dorte Wiwe; Johannessen, Helle

rehabilitative treatments intends to support recovery processes of people with serious mental illness. Aim: To investigate how employees and residents perceive complementary therapies as an integral rehabilitative treatment, and to explore the recovery related implications of spirituality employed in the use...... and health as well as for the ethics of providing complementary treatment practice in social psychiatry....

Auditory processing during deep propofol sedation and recovery from unconsciousness.

Science.gov (United States)

Koelsch, Stefan; Heinke, Wolfgang; Sammler, Daniela; Olthoff, Derk

2006-08-01

Using evoked potentials, this study investigated effects of deep propofol sedation, and effects of recovery from unconsciousness, on the processing of auditory information with stimuli suited to elicit a physical MMN, and a (music-syntactic) ERAN. Levels of sedation were assessed using the Bispectral Index (BIS) and the Modified Observer's Assessment of Alertness and Sedation Scale (MOAAS). EEG-measurements were performed during wakefulness, deep propofol sedation (MOAAS 2-3, mean BIS=68), and a recovery period. Between deep sedation and recovery period, the infusion rate of propofol was increased to achieve unconsciousness (MOAAS 0-1, mean BIS=35); EEG measurements of recovery period were performed after subjects regained consciousness. During deep sedation, the physical MMN was markedly reduced, but still significant. No ERAN was observed in this level. A clear P3a was elicited during deep sedation by those deviants, which were task-relevant during the awake state. As soon as subjects regained consciousness during the recovery period, a normal MMN was elicited. By contrast, the P3a was absent in the recovery period, and the P3b was markedly reduced. Results indicate that the auditory sensory memory (as indexed by the physical MMN) is still active, although strongly reduced, during deep sedation (MOAAS 2-3). The presence of the P3a indicates that attention-related processes are still operating during this level. Processes of syntactic analysis appear to be abolished during deep sedation. After propofol-induced anesthesia, the auditory sensory memory appears to operate normal as soon as subjects regain consciousness, whereas the attention-related processes indexed by P3a and P3b are markedly impaired. Results inform about effects of sedative drugs on auditory and attention-related mechanisms. The findings are important because these mechanisms are prerequisites for auditory awareness, auditory learning and memory, as well as language perception during anesthesia.

Conceptual model of sediment processes in the upper Yuba River watershed, Sierra Nevada, CA

Science.gov (United States)

Curtis, J.A.; Flint, L.E.; Alpers, Charles N.; Yarnell, S.M.

2005-01-01

This study examines the development of a conceptual model of sediment processes in the upper Yuba River watershed; and we hypothesize how components of the conceptual model may be spatially distributed using a geographical information system (GIS). The conceptual model illustrates key processes controlling sediment dynamics in the upper Yuba River watershed and was tested and revised using field measurements, aerial photography, and low elevation videography. Field reconnaissance included mass wasting and channel storage inventories, assessment of annual channel change in upland tributaries, and evaluation of the relative importance of sediment sources and transport processes. Hillslope erosion rates throughout the study area are relatively low when compared to more rapidly eroding landscapes such as the Pacific Northwest and notable hillslope sediment sources include highly erodible andesitic mudflows, serpentinized ultramafics, and unvegetated hydraulic mine pits. Mass wasting dominates surface erosion on the hillslopes; however, erosion of stored channel sediment is the primary contributor to annual sediment yield. We used GIS to spatially distribute the components of the conceptual model and created hillslope erosion potential and channel storage models. The GIS models exemplify the conceptual model in that landscapes with low potential evapotranspiration, sparse vegetation, steep slopes, erodible geology and soils, and high road densities display the greatest hillslope erosion potential and channel storage increases with increasing stream order. In-channel storage in upland tributaries impacted by hydraulic mining is an exception. Reworking of stored hydraulic mining sediment in low-order tributaries continues to elevate upper Yuba River sediment yields. Finally, we propose that spatially distributing the components of a conceptual model in a GIS framework provides a guide for developing more detailed sediment budgets or numerical models making it an

Conceptual design report of hot cell modification and process for fission Mo-99 production

International Nuclear Information System (INIS)

Park, Jin Ho; Choung, W. M.; Lee, K. I.; Hwang, D. S.; Kim, Y. K.; Park, K. B.; Jung, Y. J.; Kim, D. S.; Park, Y. C.

2001-05-01

In this conceptual design report, the basic data and design guides for detail design of fission Mo-99 production process and hot cell modification are included.The basic data and design guides for detail design of fission Mo-99 production process contains following contents. -design capacity, the basic process, process flow diagram, process material balance, process data. The basic data and design guides for modification of existing hot cell contains following contents. - plot plan of hot cell facility, the plan for shield reinforcement of hot cell, the plan for management and storage of high level liquid wastes, the plan of ventilation system, the plan for modification of auxiliary facilities. And also, the results of preliminary safety analysis(normal operation and accidents) and criticality analysis are included in this conceptual design report

Conceptual design report of hot cell modification and process for fission Mo-99 production

Energy Technology Data Exchange (ETDEWEB)

Park, Jin Ho; Choung, W. M.; Lee, K. I.; Hwang, D. S.; Kim, Y. K.; Park, K. B.; Jung, Y. J.; Kim, D. S.; Park, Y. C

2001-05-01

In this conceptual design report, the basic data and design guides for detail design of fission Mo-99 production process and hot cell modification are included.The basic data and design guides for detail design of fission Mo-99 production process contains following contents. -design capacity, the basic process, process flow diagram, process material balance, process data. The basic data and design guides for modification of existing hot cell contains following contents. - plot plan of hot cell facility, the plan for shield reinforcement of hot cell, the plan for management and storage of high level liquid wastes, the plan of ventilation system, the plan for modification of auxiliary facilities. And also, the results of preliminary safety analysis(normal operation and accidents) and criticality analysis are included in this conceptual design report.

APPLICATIONS OF THERMAL ENERGY STORAGE TO WASTE HEAT RECOVERY IN THE FOOD PROCESSING INDUSTRY, Final Report

Energy Technology Data Exchange (ETDEWEB)

Lundberg, W. L.; Christenson, James A.

1979-07-31

A project is discussed in which the possibilities for economical waste heat recovery and utilization in the food industry were examined. Waste heat availability and applications surveys were performed at two manufacturing plants engaged in low temperature (freezing) and high temperature (cooking, sterilizing, etc.) food processing. The surveys indicate usable waste heat is available in significant quantities which could be applied to existing, on-site energy demands resulting in sizable reductions in factory fuel and energy usage. At the high temperature plant, the energy demands involve the heating of fresh water for boiler make-up, for the food processes and for the daily clean-up operation. Clean-up poses an opportunity for thermal energy storage since waste heat is produced during the one or two production shifts of each working day while the major clean-up effort does not occur until food production ends. At the frozen food facility, the clean-up water application again exists and, in addition, refrigeration waste heat could also be applied to warm the soil beneath the ground floor freezer space. Systems to recover and apply waste heat in these situations were developed conceptually and thermal/economic performance predictions were obtained. The results of those studies indicate the economics of waste heat recovery can be attractive for facilities with high energy demand levels. Small factories, however, with relatively low energy demands may find the economics marginal although, percentagewise, the fuel and energy savings are appreciable.

Chemical process for improved oil recovery from Bakken shale

Energy Technology Data Exchange (ETDEWEB)

Shuler, Patrick; Tang, Hongxin; Lu, Zayne [ChemEOR Inc (United States); Tang, Youngchun [Power Environmental Energy Research Institute (United States)

2011-07-01

This paper presents the new chemically-improved oil recovery process (IOR) process for Bakken formation reservoirs. A custom surfactant agent can be used in standard hydraulic fracturing treatments in the Bakken to increase oil recovery. The rock formation consists of three members: the lower shale, middle dolostone and the upper shale. The dolostone was deposited as a coastal carbonate during shallower water and the shales were deposited in a relatively deep marine condition. With the widespread advent of horizontal well drilling and large-volume hydraulic fracturing treatments, production from the Bakken has become very active. The experimental results exhibited that specialized surfactant formulations will interact with this mixed oil-wet low permeability middle member to produce more oil. It was also observed that oil recovery by spontaneous imbibition was fast and significant. The best surfactant found in this study is compatible with a common fracture fluid system.

Avoiding total reduced sulfur (TRS) emissions from sodium sulfite pulping recovery processes

International Nuclear Information System (INIS)

Norman, J.C.; Sell, N.J.; Ciriacks, J.C.

1990-01-01

This paper reports that one of the current trends in paper-making with cellulose pulping is the use of high-yield processes. With yields greater than 65%, these processes include mechanical pulps (groundwood and thermomechanical pulps or TMP), and semichemical types (chemi-TMP or CTMP). Groundwood and TMP make up about 10% of North American pulp production. Semichemical pulp makes up about 7% and is mostly used for corrugating medium. High-yield pulping for linerboard, particularly using the alkaline sulfite process, is also likely to be used in the future. High-yield pulping is based primarily on the sulfite process using mostly sodium-based chemicals. A disadvantage of this process is the unavailability of a recovery system for the inorganic pulping chemicals. Generally, mills have not accepted any particular recovery system for this process. For this and other reasons, sulfite processes constitute only 3-4% of the total North American pulp production. If high-yield processes continue to increase in popularity, a sodium sulfite chemical recovery system will be needed. A number of chemical recovery systems have been developed in the past 30 years for sodium-based sulfite pulping processes, with most of the mills successfully using this process located in Scandinavia

Uncovering Recovery: The Resistible Rise of Recovery and Resilience

Directory of Open Access Journals (Sweden)

David Harper

2012-10-01

Full Text Available Discourses of recovery and resilience have risen to positions of dominance in the mental health field. Models of recovery and resilience enjoy purchase, in both policy and practice, across a range of settings from self-described psychiatric survivors through to mental health charities through to statutory mental health service providers. Despite this ubiquity, there is confusion about what recovery means. In this article we problematize notions of recovery and resilience, and consider what, if anything, should be recovered from these concepts. We focus on three key issues, i individualization, ii the persistence of a deficit model, and iii collective approaches to recovery. Through documentary analysis we consider these issues across third sector organizations, and public and mental health policy. Firstly, definitional debates about recovery reflect wider ideological debates about the nature of mental health. The vagueness of these concepts and implicit assumptions inherent in dominant recovery and resilience discourses render them problematic because they individualize what are social problems. Secondly, these discourses, despite being seen as inherently liberatory are conceptually dependent on a notion of deficit in that talk of “positives” and “strengths” requires the existence of “negatives” and “weaknesses” for these concepts to make sense.  We argue that this does little to substantially transform dominant understandings of psychological distress. Thirdly, these issues combine to impact upon the progressive potential of recovery. It comes to be seen as an individualistic experiential narrative accompaniment to medical understandings where the structural causes of distress are obscured. This in turn impacts upon the potential for recovery to be used to explore more collective, political aspects of emotional distress. Drawing on the work of Fraser, we use this critique to characterize “recovery” as a “struggle for

CONCEPTUAL NUANCES OF AMORTIZATION PROCESS TERMINOLOGY

Directory of Open Access Journals (Sweden)

Marioara Avram

2016-12-01

Full Text Available Often, both in literature and practice in economics, it is found that a number of terms related to the amortization process, such as wear, depreciation, physical lifetime, economic lifetime, useful lifetime, normal operation lifetime are used a manner that distorts their content and, therefore, affect the quality of information provided through them. In this article we intend to give opinion to contribute to clarifying the meaning of the terms mentioned, including the relationships between them, in order to provide a more rigorous conceptual base regarding the professional reasoning applicable to amortization. Given that this topic is a focal point of the spheres of interest of several categories of specialists, we will expose our work by comparing the national tax accounting regulations and, international accounting standards and international valuation standards.

Measuring personal recovery - psychometric properties of the Swedish Questionnaire about the Process of Recovery (QPR-Swe).

Science.gov (United States)

Argentzell, Elisabeth; Hultqvist, Jenny; Neil, Sandra; Eklund, Mona

2017-10-01

Personal recovery, defined as an individual process towards meaning, is an important target within mental health services. Measuring recovery hence requires reliable and valid measures. The Process of Recovery Questionnaire (QPR) was developed for that purpose. The aim was to develop a Swedish version of the QPR (QPR-Swe) and explore its psychometric properties in terms of factor structure, internal consistency, construct validity and sensitivity to change. A total of 226 participants entered the study. The factor structure was investigated by Principal Component Analysis and Scree plot. Construct validity was addressed in terms of convergent validity against indicators of self-mastery, self-esteem, quality of life and self-rated health. A one-factor solution of QPR-Swe received better support than a two-factor solution. Good internal consistency was indicated, α = 0.92, and construct validity was satisfactory. The QPR-Swe showed preliminary sensitivity to change. The QPR-Swe showed promising initial psychometric properties in terms of internal consistency, convergent validity and sensitivity to change. The QPR-Swe is recommended for use in research and clinical contexts to assess personal recovery among people with mental illness.

HYBRID SULFUR RECOVERY PROCESS FOR NATURAL GAS UPGRADING

International Nuclear Information System (INIS)

Girish Srinivas; Steven C. Gebhard; David W. DeBerry

2002-01-01

This first quarter report of 2002 describes progress on a project funded by the U.S. Department of Energy (DOE) to test a hybrid sulfur recovery process for natural gas upgrading. The process concept represents a low cost option for direct treatment of natural gas streams to remove H(sub 2)S in quantities equivalent to 0.2-25 metric tons (LT) of sulfur per day. This process is projected to have lower capital and operating costs than the competing technologies, amine/aqueous iron liquid redox and amine/Claus/tail gas treating, and have a smaller plant footprint, making it well suited to both on-shore and offshore applications. CrystaSulf(sup SM) (service mark of CrystaTech, Inc.) is a new nonaqueous sulfur recovery process that removes hydrogen sulfide (H(sub 2)S) from gas streams and converts it into elemental sulfur. CrystaSulf features high sulfur recovery similar to aqueous-iron liquid redox sulfur recovery processes, but differs from the aqueous processes in that CrystaSulf controls the location where elemental sulfur particles are formed. In the hybrid process, approximately 1/3 of the total H(sub 2)S in the natural gas is first oxidized to SO(sub 2) at low temperatures over a heterogeneous catalyst. Low temperature oxidation is done so that the H(sub 2)S can be oxidized in the presence of methane and other hydrocarbons without oxidation of the hydrocarbons. The project involves the development of a catalyst using laboratory/bench-scale catalyst testing, and then demonstration of the catalyst at CrystaTech's pilot plant in west Texas. In a previous reporting period tests were done to determine the effect of hydrocarbons such as n-hexane on catalyst performance with and without H(sub 2)S present. The experiments showed that hexane oxidation is suppressed when H(sub 2)S is present. Hexane represents the most reactive of the C1 to C6 series of alkanes. Since hexane exhibits low reactivity under H(sub 2)S oxidation conditions, and more importantly, does not change

The Conceptual Framework for Ensuring Economic Safety of Corporate Integration Processes

Directory of Open Access Journals (Sweden)

Gutsaliuk Oleksii M.

2016-08-01

Full Text Available The objective growth of the number of displays and influence of negative factors of threats from the environment actualizes the issue of ensuring economic safety of national economic entities. The article notes that simultaneously with counteracting threats enterprises are working for development, one form of which is the establishment of corporate structures and implementation of integration processes. It is proposed to ensure achieving the desired level of the corporate structure economic safety through optimizing the correlation of resources and competencies, skills and technologies for their use within the integrated logistics value chain. In this case it is the implementation of the integration process that serves as an instrument for achieving this optimal correlation, and the level of economic safety is considered as one of the optimization criteria. The system of authors’ hypotheses is taken as the basis for ensuring economic safety of the corporate integration process. Each of the hypotheses corresponds to a set of conceptual principles aimed at practical implementation of the proposed approaches. Within these conceptual principles the relationship between incentives and benefits of integration and the basis for ensuring their safety is presented, the differences between safety of functioning and safety of development are studied, the use of the methodology of logistics to harmonize the interests of participants of the corporate structure is justified, the relevance of applying the resource approach to manage the integration and development safety is proved. The graphical representation of causal relationships between the proposed conceptual principles allowed formalizing the subject area of studying corporate integration safety

Process Control for Precipitation Prevention in Space Water Recovery Systems

Science.gov (United States)

Sargusingh, Miriam; Callahan, Michael R.; Muirhead, Dean

2015-01-01

The ability to recover and purify water through physiochemical processes is crucial for realizing long-term human space missions, including both planetary habitation and space travel. Because of their robust nature, rotary distillation systems have been actively pursued by NASA as one of the technologies for water recovery from wastewater primarily comprised of human urine. A specific area of interest is the prevention of the formation of solids that could clog fluid lines and damage rotating equipment. To mitigate the formation of solids, operational constraints are in place that limits such that the concentration of key precipitating ions in the wastewater brine are below the theoretical threshold. This control in effected by limiting the amount of water recovered such that the risk of reaching the precipitation threshold is within acceptable limits. The water recovery limit is based on an empirically derived worst case wastewater composition. During the batch process, water recovery is estimated by monitoring the throughput of the system. NASA Johnson Space Center is working on means of enhancing the process controls to increase water recovery. Options include more precise prediction of the precipitation threshold. To this end, JSC is developing a means of more accurately measuring the constituent of the brine and/or wastewater. Another means would be to more accurately monitor the throughput of the system. In spring of 2015, testing will be performed to test strategies for optimizing water recovery without increasing the risk of solids formation in the brine.

"Thinking about not-thinking": neural correlates of conceptual processing during Zen meditation.

Directory of Open Access Journals (Sweden)

Giuseppe Pagnoni

2008-09-01

Full Text Available Recent neuroimaging studies have identified a set of brain regions that are metabolically active during wakeful rest and consistently deactivate in a variety the performance of demanding tasks. This "default network" has been functionally linked to the stream of thoughts occurring automatically in the absence of goal-directed activity and which constitutes an aspect of mental behavior specifically addressed by many meditative practices. Zen meditation, in particular, is traditionally associated with a mental state of full awareness but reduced conceptual content, to be attained via a disciplined regulation of attention and bodily posture. Using fMRI and a simplified meditative condition interspersed with a lexical decision task, we investigated the neural correlates of conceptual processing during meditation in regular Zen practitioners and matched control subjects. While behavioral performance did not differ between groups, Zen practitioners displayed a reduced duration of the neural response linked to conceptual processing in regions of the default network, suggesting that meditative training may foster the ability to control the automatic cascade of semantic associations triggered by a stimulus and, by extension, to voluntarily regulate the flow of spontaneous mentation.

Researching International Processes of Education Policy Formation: Conceptual and Methodological Considerations

Science.gov (United States)

Edwards, D. Brent, Jr.

2012-01-01

This article elaborates one approach to conceptualizing and investigating international processes of education policy formation (IPEPF), which are dynamic, multi-level and processual in nature. This contribution is important because, although research is increasingly conducted on phenomena with such characteristics, extended discussions of how…

Technology of uranium recovery from wet-process phosphoric acid

Energy Technology Data Exchange (ETDEWEB)

Inoue, Katsutoshi [Saga Univ. (Japan). Faculty of Science and Engineering; Nakashio, Fumiyuki

1982-12-01

Rock phosphate contains from 0.005 to 0.02 wt.% of uranium. Though the content is a mere 5 to 10 % of that in uranium ore, the total recovery of uranium is significant since it is used for fertilizer manufacture in a large quantity. Wet-process phosphoric acid is produced by the reaction of rock phosphate with sulfuric acid. The recovery of uranium from this phosphoric acid is mostly by solvent extraction at present. According to U/sup 4 +/ or UO/sub 2//sup 2 +/ as the form of its existence, the technique of solvent extraction differs. The following matters are described: processing of rock phosphate; recovery techniques including the extraction by OPPA-octyl pyrophosphoric acid for U/sup 4 +/, and by mixed DEHPA-Di-(2)-ethylhexyl phosphoric acid and TOPO-tryoctyl phosphine oxide for UO/sub 2//sup 2 +/, and by OPAP-octylphenyl acid phosphate for U/sup 4 +/; the recent progress of the technology as seen in patents.

Individual psychotherapy for schizophrenia: trends and developments in the wake of the recovery movement

Directory of Open Access Journals (Sweden)

Hamm JA

2013-08-01

Full Text Available Jay A Hamm,1 Ilanit Hasson-Ohayon,2 Marina Kukla,3 Paul H Lysaker11Richard L Roudebush VA Medical Center, Department of Psychiatry, Indianapolis, IN, USA; 2Bar-Ilan University, Department of Psychology, Ramat Gan, Israel; 3Health Services Research and Development Center of Excellence on Implementing Evidence-Based Practice, Richard L Roudebush VA Medical Center, Indianapolis, IN, USAAbstract: Although the role and relative prominence of psychotherapy in the treatment of schizophrenia has fluctuated over time, an analysis of the history of psychotherapy for schizophrenia, focusing on findings from the recovery movement, reveals recent trends including the emergence of the development of integrative psychotherapy approaches. The authors suggest that the recovery movement has revealed limitations in traditional approaches to psychotherapy, and has provided opportunities for integrative approaches to emerge as a mechanism for promoting recovery in persons with schizophrenia. Five approaches to integrative psychotherapy for persons with schizophrenia are presented, and a shared conceptual framework that allows these five approaches to be compatible with one another is proposed. The conceptual framework is consistent with theories of recovery and emphasizes interpersonal attachment, personal narrative, and metacognitive processes. Implications for future research on integrative psychotherapy are considered.Keywords: schizophrenia, psychotherapy, recovery, metacognition, psychosis, integrative psychotherapy

MEDIATING COGNITIVE TRANSFORMATION WITH VR 3D SKETCHING DURING CONCEPTUAL ARCHITECTURAL DESIGN PROCESS

Directory of Open Access Journals (Sweden)

Farzad Pour Rahimian

2011-03-01

Full Text Available Communications for information synchronization during the conceptual design phase require designers to employ more intuitive digital design tools. This paper presents findings of a feasibility study for using VR 3D sketching interface in order to replace current non-intuitive CAD tools. We used a sequential mixed method research methodology including a qualitative case study and a cognitive-based quantitative protocol analysis experiment. Foremost, the case study research was conducted in order to understand how novice designers make intuitive decisions. The case study documented the failure of conventional sketching methods in articulating complicated design ideas and shortcomings of current CAD tools in intuitive ideation. The case study’s findings then became the theoretical foundations for testing the feasibility of using VR 3D sketching interface during design. The latter phase of study evaluated the designers’ spatial cognition and collaboration at six different levels: "physical-actions", "perceptualactions", "functional-actions", "conceptual-actions", "cognitive synchronizations", and "gestures". The results and confirmed hypotheses showed that the utilized tangible 3D sketching interface improved novice designers’ cognitive and collaborative design activities. In summary this paper presents the influences of current external representation tools on designers’ cognition and collaboration as well as providing the necessary theoretical foundations for implementing VR 3D sketching interface. It contributes towards transforming conceptual architectural design phase from analogue to digital by proposing a new VR design interface. The paper proposes this transformation to fill in the existing gap between analogue conceptual architectural design process and remaining digital engineering parts of building design process hence expediting digital design process.

Recovery of acids from dilute streams : A review of process technologies

International Nuclear Information System (INIS)

Talnikar, Vivek Digambar; Mahajan, Yogesh Shankar

2014-01-01

Chemical process industries convert raw materials into useful products. Acids, among other chemicals, are used in many industries as reactants, solvents and also as catalysts in a few instances as well. Resulting streams are dilute, from which the acids must be recovered. For recovery, many technologies can be used by which acids can be regained as such or can be converted into other value-added products like esters. Membrane processes and biological processes are being researched academically and practiced industrially. These have their own advantages and disadvantages in view of conversion, energy consumption etc. These are not always advantageous and hence an alternate process technology is necessary like reactive separation (RS). RS is advantageous especially when the acid is to be converted to other useful products by reaction, due to additional advantages or because no other technology is well suited or due to cost considerations alone. Conventional process technologies use the reactor configuration followed by the subsequent separation sequence. This approach can sometimes suffer from lesser conversion, difficulties in separation etc. To overcome these problems, RS has an edge over other processes in terms of the recovery of the useful compounds. Reactive distillation (RD), reactive extraction (RE) and reactive chromatography (RC) are the separation technologies that can be useful for acid recovery in an economically feasible way. This review covers the various processes of acid recovery along with the recent work in the field of reactive separations

On the optimal design of the disassembly and recovery processes.

Science.gov (United States)

Xanthopoulos, A; Iakovou, E

2009-05-01

This paper tackles the problem of the optimal design of the recovery processes of the end-of-life (EOL) electric and electronic products, with a special focus on the disassembly issues. The objective is to recover as much ecological and economic value as possible, and to reduce the overall produced quantities of waste. In this context, a medium-range tactical problem is defined and a novel two-phased algorithm is presented for a remanufacturing-driven reverse supply chain. In the first phase, we propose a multicriteria/goal-programming analysis for the identification and the optimal selection of the most 'desirable' subassemblies and components to be disassembled for recovery, from a set of different types of EOL products. In the second phase, a multi-product, multi-period mixed-integer linear programming (MILP) model is presented, which addresses the optimization of the recovery processes, while taking into account explicitly the lead times of the disassembly and recovery processes. Moreover, a simulation-based solution approach is proposed for capturing the uncertainties in reverse logistics. The overall approach leads to an easy-to-use methodology that could support effectively middle level management decisions. Finally, the applicability of the developed methodology is illustrated by its application on a specific case study.

On the optimal design of the disassembly and recovery processes

International Nuclear Information System (INIS)

Xanthopoulos, A.; Iakovou, E.

2009-01-01

This paper tackles the problem of the optimal design of the recovery processes of the end-of-life (EOL) electric and electronic products, with a special focus on the disassembly issues. The objective is to recover as much ecological and economic value as possible, and to reduce the overall produced quantities of waste. In this context, a medium-range tactical problem is defined and a novel two-phased algorithm is presented for a remanufacturing-driven reverse supply chain. In the first phase, we propose a multicriteria/goal-programming analysis for the identification and the optimal selection of the most 'desirable' subassemblies and components to be disassembled for recovery, from a set of different types of EOL products. In the second phase, a multi-product, multi-period mixed-integer linear programming (MILP) model is presented, which addresses the optimization of the recovery processes, while taking into account explicitly the lead times of the disassembly and recovery processes. Moreover, a simulation-based solution approach is proposed for capturing the uncertainties in reverse logistics. The overall approach leads to an easy-to-use methodology that could support effectively middle level management decisions. Finally, the applicability of the developed methodology is illustrated by its application on a specific case study

Process options and projected mass flows for the HTGR refabrication scrap recovery system

International Nuclear Information System (INIS)

Tiegs, S.M.

1979-03-01

The two major uranium recovery processing options reviewed are (1) internal recovery of the scrap by the refabrication system and (2) transfer to and external recovery of the scrap by the head end of the reprocessing system. Each option was reviewed with respect to equipment requirements, preparatory processing, and material accountability. Because there may be a high cost factor on transfer of scrap fuel material to the reprocessing system for recovery, all of the scrap streams will be recycled internally within the refabrication system, with the exception of reject fuel elements, which will be transferred to the head end of the reprocessing system for uranium recovery. The refabrication facility will be fully remote; thus, simple recovery techniques were selected as the reference processes for scrap recovery. Crushing, burning, and leaching methods will be used to recover uranium from the HTGR refabrication scrap fuel forms, which include particles without silicon carbide coatings, particles with silicon carbide coatings, uncarbonized fuel rods, carbon furnace parts, perchloroethylene distillation bottoms, and analytical sample remnants. Mass flows through the reference scrap recovery system were calculated for the HTGR reference recycle facility operating with the highly enriched uranium fuel cycle. Output per day from the refabrication scrap recovery system is estimated to be 4.02 kg of 2355 U and 10.85 kg of 233 U. Maximum equipment capacities were determined, and future work will be directed toward the development and costing of the scrap recovery system chosen as reference

Process for uranium recovery in phosphorus compounds

International Nuclear Information System (INIS)

Demarthe, J.M.; Solar, Serge.

1980-01-01

Process for uranium recovery in phosphorus compounds with an organic phase containing a dialkylphosphoric acid. A solubilizing agent constituted of an heavy alcohol or a phosphoric acid ester or a tertiary phosphine oxide or octanol-2, is added to the organic phase for solubilization of the uranium and ammonium dialkyl pyrophosphate [fr

Conceptual metaphor and comprehension in business writing

Directory of Open Access Journals (Sweden)

Smit, Talita C.

2010-12-01

Full Text Available Recent research studies in cognitive linguistics (Gibbs, 1999; Kővecses, 2005; Lakoff, 1987; Lakoff & Johnson, 1980; Lakoff & Johnson, 1999 have demonstrated that metaphor is not merely a figure of speech. The findings of these studies have shown that metaphor influences a good deal of how people think as it comprises a specific mental, cross-domain mapping in the conceptual system (Balaban, 1999; Ibarretxe-Antuňanu, 1999; Lakoff, 2006; Lakoff & Johnson, 1980. This article looks at whether employing different conceptual metaphors in different versions of the same business report will have an effect on reader comprehension. A small-scale research study was conducted with a group of second-year university students, in which they were given one of two texts concerning the recovery of the economy. Both texts were adapted from a newspaper report and seeded with metaphors and metaphoric expressions. The multiple-choice questions that followed aimed to determine to what extent the readers’ comprehension and interpretation of the report were influenced by the different conceptual metaphors used. The findings indicate that language that served to introduce the sources or targets directly into the content did not necessarily have an effect on the processing of subsequent metaphors involving these concepts; however, it appeared that the surface patterns of metaphorical discourse did affect the inferences drawn about the different conceptual metaphors. It can thus be concluded that a specific metaphoric framework in written discourse does influence the interpretation of the content.

[A Correlational Study of the Recovery Process in Patients With Mental Illness].

Science.gov (United States)

Huang, Yao-Hui; Lin, Yao-Yu; Lee, Shih-Kai; Lee, Ming-Feng; Lin, Ching-Lan Esther

2018-04-01

The ideology of recovery addresses the autonomy of patients with mental illness and their ability to reconstruct a normal life. Empirical knowledge of this process of recovery and related factors remains unclear. To assess the process of recovery and related factors in patients with mental illness. This cross-sectional, correlational study was conducted on a convenience sample in a psychiatric hospital. Two-hundred and fifty patients with mental illness were recruited and were assessed using 3 instruments: Questionnaire about the Process of Recovery (QPR), Perceived Psychiatric Stigma Scale (PPSS), and Personal and Social Performance Scale (PSP). Data were analyzed using descriptive statistics, χ 2 , analysis of variance, and multiple linear regression analysis. Most of the participants were male, middle-aged, unmarried, educated to the senior high school level, employed, receiving home-care treatment, and diagnosed with schizophrenia. Those who were unemployed, living in a community rehabilitative house, and living in the community, respectively, earned relatively higher recovery scores (p mental illness. Community psychiatric nurses should provide care to help employed patients adapt to stresses in the workplace, strengthen their stigma-coping strategies, and promote public awareness of mental health issues by increasing public knowledge and acceptance of mental illness in order to minimize patient-perceived stigma and facilitate their recovery.

Closed Process of Shale Oil Recovery from Circulating Washing Water by Hydrocyclones

Directory of Open Access Journals (Sweden)

Yuan Huang

2016-12-01

Full Text Available The conventional oil recovery system in the Fushun oil shale retorting plant has a low oil recovery rate. A large quantity of fresh water is used in the system, thereby consuming a considerable amount of water and energy, as well as polluting the environment. This study aims to develop a closed process of shale oil recovery from the circulating washing water for the Fushun oil shale retorting plant. The process would increase oil yield and result in clean production. In this process, oil/water hydrocyclone groups were applied to decrease the oil content in circulating water and to simultaneously increase oil yield. The oil sludge was removed by the solid/liquid hydrocyclone groups effectively, thereby proving the smooth operation of the devices and pipes. As a result, the oil recovery rate has increased by 5.3 %, which corresponds to 230 tonnes a month.

Energy-neutral sustainable nutrient recovery incorporated with the wastewater purification process in an enlarged microbial nutrient recovery cell

Science.gov (United States)

Sun, Dongya; Gao, Yifan; Hou, Dianxun; Zuo, Kuichang; Chen, Xi; Liang, Peng; Zhang, Xiaoyuan; Ren, Zhiyong Jason; Huang, Xia

2018-04-01

Recovery of nutrient resources from the wastewater is now an inevitable strategy to maintain the supply of both nutrient and water for our huge population. While the intensive energy consumption in conventional nutrient recovery technologies still remained as the bottleneck towards the sustainable nutrient recycle. This study proposed an enlarged microbial nutrient recovery cell (EMNRC) which was powered by the energy contained in wastewater and achieved multi-cycle nutrient recovery incorporated with in situ wastewater treatment. With the optimal recovery solution of 3 g/L NaCl and the optimal volume ratio of wastewater to recovery solution of 10:1, >89% of phosphorus and >62% of ammonium nitrogen were recovered into struvite. An extremely low water input ratio of water. It was proved the EMNRC system was a promising technology which could utilize the chemical energy contained in wastewater itself and energy-neutrally recover nutrient during the continuous wastewater purification process.

Design of Hybrid Steam-In Situ Combustion Bitumen Recovery Processes

International Nuclear Information System (INIS)

Yang Xiaomeng; Gates, Ian D.

2009-01-01

Given enormous capital costs, operating expenses, flue gas emissions, water treatment and handling costs of thermal in situ bitumen recovery processes, improving the overall efficiency by lowering energy requirements, environmental impact, and costs of these production techniques is a priority. Steam-assisted gravity drainage (SAGD) is the most widely used in situ recovery technique in Athabasca reservoirs. Steam generation is done on surface and consequently, because of heat losses, the energy efficiency of SAGD can never be ideal with respect to the energy delivered to the sandface. An alternative to surface steam generation is in situ combustion (ISC) where heat is generated within the formation through injection of oxygen at a sufficiently high pressure to initiate combustion of bitumen. In this manner, the heat from the combustion reactions can be used directly to mobilize the bitumen. As an alternative, the heat can be used to generate steam within the formation which then is the agent to move heat in the reservoir. In this research, alternative hybrid techniques with simultaneous and sequential steam-oxygen injection processes are examined to maximize the thermal efficiency of the recovery process. These hybrid processes have the advantage that during ISC, steam is generated within the reservoir from injected and formation water and as a product of oxidation. This implies that ex situ steam generation requirements are reduced and if there is in situ storage of combustion gases, that overall gas emissions are reduced. In this research, detailed reservoir simulations are done to examine the dynamics of hybrid processes to enable design of these processes. The results reveal that hybrid processes can lower emitted carbon dioxide-to-oil ratio by about 46%, decrease the consumed natural gas-to-oil ratio by about 73%, reduce the cumulative energy-to-oil ratio by between 40% and 70% compared to conventional SAGD, and drop water consumption per unit oil produced

Spectral analysis of creep recovery process in finemet type amorphous alloy

NARCIS (Netherlands)

Jurikova, A; Csach, K; Miskuf, J; Bengus, VZ; Ocelik, Vaclav

2002-01-01

The creep recovery process in Finemet type amorphous alloy leas been analyzed using the method for calculating the relaxation tithe spectra. The influence of structural relaxation and temperature on the spectra shape lags been studied. The creep recovery spectrum of the anelastic deformation of the

Combined gettering and molten salt process for tritium recovery from lithium

International Nuclear Information System (INIS)

Sze, D.K.; Finn, P.A.; Bartlit, J.; Tanaka, S.; Teria, T.; Yamawaki, M.

1988-02-01

A new tritium recovery concept from lithium has been developed as part of the US/Japan collaboration on Reversed-Field Pinch Reactor Design Studies. This concept combines the γ-gettering process as the front end to recover tritium from the coolant, and a molten salt recovery process to extract tritium for fuel processing. A secondary lithium is used to regenerate the tritium from the gettering bed and, in the process, increases the tritium concentration by a factor of about 20. That way, the required size of the molten salt process becomes very small. A potential problem is the possible poisoning of the gettering bed by the salt dissolved in lithium. 16 refs., 6 figs

Pressurized Recuperator For Heat Recovery In Industrial High Temperature Processes

Directory of Open Access Journals (Sweden)

Gil S.

2015-09-01

Full Text Available Recuperators and regenerators are important devices for heat recovery systems in technological lines of industrial processes and should have high air preheating temperature, low flow resistance and a long service life. The use of heat recovery systems is particularly important in high-temperature industrial processes (especially in metallurgy where large amounts of thermal energy are lost to the environment. The article presents the process design for a high efficiency recuperator intended to work at high operating parameters: air pressure up to 1.2 MPa and temperature of heating up to 900°C. The results of thermal and gas-dynamic calculations were based on an algorithm developed for determination of the recuperation process parameters. The proposed technical solution of the recuperator and determined recuperation parameters ensure its operation under maximum temperature conditions.

The Conceptualization of the Mathematical Modelling Process in Technology-Aided Environment

Science.gov (United States)

Hidiroglu, Çaglar Naci; Güzel, Esra Bukova

2017-01-01

The aim of the study is to conceptualize the technology-aided mathematical modelling process in the frame of cognitive modelling perspective. The grounded theory approach was adopted in the study. The research was conducted with seven groups consisting of nineteen prospective mathematics teachers. The data were collected from the video records of…

Coal-gold agglomeration: an alternative separation process in gold recovery

Energy Technology Data Exchange (ETDEWEB)

Akcil, A.; Wu, X.Q.; Aksay, E.K. [Suleyman Demirel University, Isparta (Turkey). Dept. of Mining Engineering

2009-07-01

Considering the increasing environmental concerns and the potential for small gold deposits to be exploited in the future, the uses of environmentally friendly processes are essential. Recent developments point to the potential for greatly increased plant performance through a separation process that combines the cyanide and flotation processes. In addition, this kind of alternative treatment processes to the traditional gold recovery processes may reduce the environmental risks of present small-scale gold mining. Gold recovery processes that applied to different types of gold bearing ore deposits show that the type of deposits plays an important role for the selection of mineral processing technologies in the production of gold and other precious metals. In the last 25 years, different alternative processes have been investigated on gold deposits located in areas where environmental issues are a great concern. In 1988, gold particles were first recovered by successful pilot trial of coal-gold agglomeration (CGA) process in Australia. The current paper reviews the importance of CGA in the production of gold ore and identifies areas for further development work.

The Policy Formation Process: A Conceptual Framework for Analysis. Ph.D. Thesis

Science.gov (United States)

Fuchs, E. F.

1972-01-01

A conceptual framework for analysis which is intended to assist both the policy analyst and the policy researcher in their empirical investigations into policy phenomena is developed. It is meant to facilitate understanding of the policy formation process by focusing attention on the basic forces shaping the main features of policy formation as a dynamic social-political-organizational process. The primary contribution of the framework lies in its capability to suggest useful ways of looking at policy formation reality. It provides the analyst and the researcher with a group of indicators which suggest where to look and what to look for when attempting to analyze and understand the mix of forces which energize, maintain, and direct the operation of strategic level policy systems. The framework also highlights interconnections, linkage, and relational patterns between and among important variables. The framework offers an integrated set of conceptual tools which facilitate understanding of and research on the complex and dynamic set of variables which interact in any major strategic level policy formation process.

A new conceptual cold-end design of boilers for coal-fired power plants with waste heat recovery

International Nuclear Information System (INIS)

Yang, Yongping; Xu, Cheng; Xu, Gang; Han, Yu; Fang, Yaxiong; Zhang, Dongke

2015-01-01

Highlights: • A new cold-end design of boilers for CFPPs with waste heat recovery is proposed. • Thermodynamic and economic analyses are quantitatively conducted. • Higher energy efficiency improvement and greater economic benefits are achieved. • Lower exergy destruction and better matched energy level are obtained. - Abstract: After conducting an in-depth analysis of the conventional boiler cold-end design for waste heat recovery, this work proposed a new conceptual boiler cold-end design integrated with the steam cycle in a 1000 MW CFPP, in which the preheating of air was divided into high-temperature air preheater (HTAP), main air preheater (MAP) and low-temperature air preheater (LTAP). The HTAP and an economizer were installed in separate flue ducts, and the low temperature economizer (LTE) was situated between the MAP and the LTAP in the main flue duct to heat the condensed water. In the proposed boiler cold-end design, the flue gas waste heat was not only used to heat condensed water, but also to further preheat the combustion air. The air temperature at the air-preheater outlet increases and part of the steam bleeds with high exergy can be saved, resulting in greater energy-savings and better economics. Results showed that, for a typical 1000 MW CFPP in China, using the proposed boiler cold-end design for waste heat recovery could produce 13.3 MW e additional net power output with a heat rate reduction of approximately 112.0 kJ/kW h and could yield a net benefit of up to $85.8 M per year, which is much greater than those of the conventional cases. Exergy destruction is also reduced from 49.9 MW th in the conventional boiler cold-end design to 39.6 MW th in the proposed design

Process generalization in conceptual models

NARCIS (Netherlands)

Wieringa, Roelf J.

In conceptual modeling, the universe of discourse (UoD) is divided into classes which have a taxonomic structure. The classes are usually defined in terms of attributes (all objects in a class share attribute names) and possibly of events. For enmple, the class of employees is the set of objects to

Recovery of phosphorus and aluminium from sewage sludge ash by a new wet chemical elution process (SESAL-Phos-recovery process).

Science.gov (United States)

Petzet, S; Peplinski, B; Bodkhe, S Y; Cornel, P

2011-01-01

The potential of a new wet chemical process for phosphorus and aluminium recovery from sewage sludge ash by sequential elution with acidic and alkaline solutions has been investigated: SESAL-Phos (sequential elution of sewage sludge ash for aluminium and phosphorus recovery). Its most innovative aspect is an acidic pre-treatment step in which calcium is leached from the sewage sludge ash. Thus the percentage of alkaline soluble aluminium phosphates is increased from 20 to 67%. This aluminium phosphate is then dissolved in alkali. Subsequently, the dissolved phosphorus is precipitated as calcium phosphate with low heavy metal content and recovered from the alkaline solution. Dissolved aluminium is recovered and may be reused as a precipitant in wastewater treatment plants.

Conceptual Design for the Pilot-Scale Plutonium Oxide Processing Unit in the Radiochemical Processing Laboratory

Energy Technology Data Exchange (ETDEWEB)

Lumetta, Gregg J.; Meier, David E.; Tingey, Joel M.; Casella, Amanda J.; Delegard, Calvin H.; Edwards, Matthew K.; Jones, Susan A.; Rapko, Brian M.

2014-08-05

This report describes a conceptual design for a pilot-scale capability to produce plutonium oxide for use as exercise and reference materials, and for use in identifying and validating nuclear forensics signatures associated with plutonium production. This capability is referred to as the Pilot-scale Plutonium oxide Processing Unit (P3U), and it will be located in the Radiochemical Processing Laboratory at the Pacific Northwest National Laboratory. The key unit operations are described, including plutonium dioxide (PuO2) dissolution, purification of the Pu by ion exchange, precipitation, and conversion to oxide by calcination.

Simulation of petroleum recovery in naturally fractured reservoirs: physical process representation

Energy Technology Data Exchange (ETDEWEB)

Paiva, Hernani P.; Miranda Filho, Daniel N. de [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil); Schiozer, Denis J. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil)

2012-07-01

The naturally fractured reservoir recovery normally involves risk especially in intermediate to oil wet systems because of the simulations poor efficiency results under waterflood displacement. Double-porosity models are generally used in fractured reservoir simulation and have been implemented in the major commercial reservoir simulators. The physical processes acting in petroleum recovery are represented in double-porosity models by matrix-fracture transfer functions, therefore commercial simulators have their own implementations, and as a result different kinetics and final recoveries are attained. In this work, a double porosity simulator was built with Kazemi et al. (1976), Sabathier et al. (1998) and Lu et al. (2008) transfer function implementations and their recovery results have been compared using waterflood displacement in oil-wet or intermediate-wet systems. The results of transfer function comparisons have showed recovery improvements in oil-wet or intermediate-wet systems under different physical processes combination, particularly in fully discontinuous porous medium when concurrent imbibition takes place, coherent with Firoozabadi (2000) experimental results. Furthermore, the implemented transfer functions, related to a double-porosity model, have been compared to double-porosity commercial simulator model, as well a discrete fracture model with refined grid, showing differences between them. Waterflood can be an effective recovery method even in fully discontinuous media for oil-wet or intermediate-wet systems where concurrent imbibition takes place with high enough pressure gradients across the matrix blocks. (author)

Survivability Assessment: Modeling A Recovery Process

OpenAIRE

Paputungan, Irving Vitra; Abdullah, Azween

2009-01-01

Survivability is the ability of a system to continue operating, in a timely manner, in the presence ofattacks, failures, or accidents. Recovery in survivability is a process of a system to heal or recover from damageas early as possible to fulfill its mission as condition permit. In this paper, we show a preliminary recoverymodel to enhance the system survivability. The model focuses on how we preserve the system and resumes itscritical service under attacks as soon as possible.Keywords: surv...

Co-production of the Service Recovery

DEFF Research Database (Denmark)

Sørensen, Jannick Kirk

2015-01-01

In this paper we apply Dourish’ (2001) conceptual framework of embodied interaction on a ICT-centric service encounter, namely the use of the online self-service system for reporting of tax and tax reduction claims offered by the Danish tax authority. An expected short and straight-forward servic...... and the service recovery process, thereby informing the innovation and design of ICT-centric service encounters.......In this paper we apply Dourish’ (2001) conceptual framework of embodied interaction on a ICT-centric service encounter, namely the use of the online self-service system for reporting of tax and tax reduction claims offered by the Danish tax authority. An expected short and straight-forward service...... encounter developed in this case into to a two weeks long service journey involving several human and computer actors as the reason for the service failure (represented by a blank pop-up window instead of the expected online form) could not be found. The case, which is seen as paradigmatic is used to test...

Data warehousing methods and processing infrastructure for brain recovery research.

Science.gov (United States)

Gee, T; Kenny, S; Price, C J; Seghier, M L; Small, S L; Leff, A P; Pacurar, A; Strother, S C

2010-09-01

In order to accelerate translational neuroscience with the goal of improving clinical care it has become important to support rapid accumulation and analysis of large, heterogeneous neuroimaging samples and their metadata from both normal control and patient groups. We propose a multi-centre, multinational approach to accelerate the data mining of large samples and facilitate data-led clinical translation of neuroimaging results in stroke. Such data-driven approaches are likely to have an early impact on clinically relevant brain recovery while we simultaneously pursue the much more challenging model-based approaches that depend on a deep understanding of the complex neural circuitry and physiological processes that support brain function and recovery. We present a brief overview of three (potentially converging) approaches to neuroimaging data warehousing and processing that aim to support these diverse methods for facilitating prediction of cognitive and behavioral recovery after stroke, or other types of brain injury or disease.

Evaluating the potential of process sites for waste heat recovery

International Nuclear Information System (INIS)

Oluleye, Gbemi; Jobson, Megan; Smith, Robin; Perry, Simon J.

2016-01-01

Highlights: • Analysis considers the temperature and duties of the available waste heat. • Models for organic Rankine cycles, absorption heat pumps and chillers proposed. • Exploitation of waste heat from site processes and utility systems. • Concept of a site energy efficiency introduced. • Case study presented to illustrate application of the proposed methodology. - Abstract: As a result of depleting reserves of fossil fuels, conventional energy sources are becoming less available. In spite of this, energy is still being wasted, especially in the form of heat. The energy efficiency of process sites (defined as useful energy output per unit of energy input) may be increased through waste heat utilisation, thereby resulting in primary energy savings. In this work, waste heat is defined and a methodology developed to identify the potential for waste heat recovery in process sites; considering the temperature and quantity of waste heat sources from the site processes and the site utility system (including fired heaters and, the cogeneration, cooling and refrigeration systems). The concept of the energy efficiency of a site is introduced – the fraction of the energy inputs that is converted into useful energy (heat or power or cooling) to support the methodology. Furthermore, simplified mathematical models of waste heat recovery technologies using heat as primary energy source, including organic Rankine cycles (using both pure and mixed organics as working fluids), absorption chillers and absorption heat pumps are developed to support the methodology. These models are applied to assess the potential for recovery of useful energy from waste heat. The methodology is illustrated for an existing process site using a case study of a petroleum refinery. The energy efficiency of the site increases by 10% as a result of waste heat recovery. If there is an infinite demand for recovered energy (i.e. all the recoverable waste heat sources are exploited), the site

Silver recovery from the waste materials by the method of flotation process

OpenAIRE

B. Oleksiak; G. Siwiec; A. Tomaszewska; D. Piękoś

2018-01-01

During the leaching process of zinc concentrates, the waste materials rich in various metals such as eg. silver are produced. So far no attempts of silver recovery from the mentioned waste materials have been made due to the lack of any method which would be both effective and beneficial. The paper presents some possibilities of application of flotation process in silver recovery form waste materials generated during zinc production.

A multi-stage oil-water-separating process design for the sea oil spill recovery robot

Science.gov (United States)

Zhang, Min-ge; Wu, Jian-guo; Lin, Xinhua; Wang, Xiao-ming

2018-03-01

Oil spill have the most common pollution to the marine ecological environment. In the late stage of physical method recovery, because of the thin oil and the strong sea breeze, the recovery vessels has low efficiency and high energy consumption. This paper develops a multi-stage oil-water-separating process carried by the sea oil spill recovery robot in severe conditions. This design consists of three separation process, among which both the first and third process adopt corrugated sheets horizontal oil-water separator, while the second is hydraulic rotary breaker. This design also equiptment with rectifier and cyclone separator and other important components. This process has high flexibility and high recovery efficiency. The implement effect is significant.

Conceptual design for the Waste Receiving and Processing facility Module 2A

International Nuclear Information System (INIS)

1992-07-01

This is part of a Conceptual Design Report (CDR) for the Waste Receiving and Processing (WRAP) Module 2A facility at Hanford Reservation. The mission of the WRAP Module 2A facility is to receive, process, package, certify, and ship for permanent burial at the Hanford site disposal facilities those contact handled (CH) low-level radioactive mixed wastes (LLMW) that: (1) are currently in retrievable storage at the Hanford Central Waste Complex (HCWC) awaiting a treatment capability to permit permanent disposal compliant with the Land Disposal Restrictions and; (2) are forecasted to be generated over the next 30 years. The primary sources of waste to be treated at WRAP Module 2A include the currently stored waste from the 183-H solar basin evaporators, secondary solids from the future Hanford site liquid effluenttreatment facilities, thermal treatment facility ash, other WRAP modules, and other miscellaneous waste from storage and onsite/offsite waste generators consisting of compactible and non-compactible solids, contaminated soils, and metals. This volume, Volume V, provides a comprehensive conceptual design level narrative description of the process, utility, ventilation, and plant control systems. The feeds and throughputs, design requirements, and basis for process selection are provided, as appropriate. Key DOE/WHC criteria and reference drawings are delineated

Hydrometallurgical process for zinc recovery from electric arc furnace dust (EAFD)

International Nuclear Information System (INIS)

Oustadakis, P.; Tsakiridis, P.E.; Katsiapi, A.; Agatzini-Leonardou, S.

2010-01-01

The present paper is the first of a series of two articles dealing with the development of an integrated process for the recovery of zinc from electric arc furnace dust (EAFD), a hazardous industrial waste generated in the collection of particulate material during steelmaking process via electric arc furnace. Part I presents the EAFD characterization and its leaching process by diluted sulphuric acid, whereas Part II deals with the purification of the leach liquor and the recovery of zinc by solvent extraction/electrowinning. The characterization of the examined electric arc furnace dust was carried out by using granulometry analysis, chemical analysis, X-ray diffraction (XRD), thermogravimetric/differential thermal analysis (TG/DTA) and scanning electron microscopy (SEM). The leaching process was based on the Zn extraction with diluted sulphuric acid from EAFD under atmospheric conditions and without using any preliminary treatment. Statistical design and analysis of experiments were used, in order to determine the main effects and interactions of the leaching process factors, which were: acid normality, temperature and solid to liquid ratio. The zinc recovery efficiency on the basis of EAFD weight reached 80%. X-ray diffraction and scanning electron microscopy were used for the characterization of the leached residues.

Silver recovery from the waste materials by the method of flotation process

Directory of Open Access Journals (Sweden)

B. Oleksiak

2018-01-01

Full Text Available During the leaching process of zinc concentrates, the waste materials rich in various metals such as eg. silver are produced. So far no attempts of silver recovery from the mentioned waste materials have been made due to the lack of any method which would be both effective and beneficial. The paper presents some possibilities of application of flotation process in silver recovery form waste materials generated during zinc production.

The Place of Social Recovery in Mental Health and Related Services.

Science.gov (United States)

Ramon, Shulamit

2018-05-23

This article looks at the place of social recovery in mental health and social care services, alongside personal recovery. Despite its conceptual and practice centrality to the new meaning of recovery, social recovery has remained a relatively neglected dimension. This article attempts to provide an updated critical commentary based on findings from fifty nine studies, including a variety of research methodologies and methods. Definitions of social recovery within the new meaning of recovery are looked at. This is followed by outlining the development and significance of this dimension as reflected in the key areas of shared decision making, co-production and active citizenship, re-entering employment after experiencing mental ill health, being in employment, poverty and coping with poverty, the economic and the scientific cases for social recovery. The article highlights the connections between service users' experiencing mental health and social care systems, and the implications of ideologies and policies reflecting positions on social recovery. The complexity of social recovery is indicated in each of these areas; the related conceptual and methodological frameworks developed to research this dimension, and key achievements and barriers concerning everyday practice application of social recovery. The summary indicates potential future development perspectives of this dimension.

International Patients' Travel Decision Making Process- A Conceptual Framework.

Science.gov (United States)

Khan, Mohammad Jamal; Chelliah, Shankar; Haron, Mahmod Sabri

2016-02-01

Role of information source, perceived benefits and risks, and destination image has significantly been examined in travel and tourism literature; however, in medical tourism it is yet to be examined thoroughly. The concept discussed in this article is drawn form well established models in tourism literature. The purpose of this research was to identify the source of information, travel benefits and perceived risks related to movement of international patients and develop a conceptual model based on well-established theory. Thorough database search (Science Direct, utmj.org, nih.gov, nchu.edu.tw, palgrave-journals, medretreat, Biomedcentral) was performed to fulfill the objectives of the study. International patients always concern about benefits and risks related to travel. These benefits and risks form images of destination in the minds of international patients. Different sources of information make international patients acquaint about the associated benefits and risks, which later leads to development of intention to visit. This conceptual paper helps in establishing model for decision-making process of international patients in developing visit intention. Ample amount of literature is available detailing different factors involved in travel decision making of international patients; however literature explaining relationship between these factors is scarce.

Acceptance and Avoidance Processes at Different Levels of Psychological Recovery from Enduring Mental Illness.

Science.gov (United States)

Siqueira, Vinicius R; Oades, Lindsay G

2015-01-01

Objective. This study examined the use of psychological acceptance and experiential avoidance, two key concepts of Acceptance and Commitment Therapy (ACT), in the psychological recovery process of people with enduring mental illness. Method. Sixty-seven participants were recruited from the metropolitan, regional, and rural areas of New South Wales, Australia. They all presented some form of chronic mental illness (at least 12 months) as reflected in DSM-IV Axis I diagnostic criteria. The Acceptance and Action Questionnaire (AAQ-19) was used to measure the presence of psychological acceptance and experiential avoidance; the Recovery Assessment Scale (RAS) was used to examine the levels of psychological recovery; and the Scales of Psychological Well-Being was used to observe if there are benefits in utilizing psychological acceptance and experiential avoidance in the recovery process. Results. An analysis of objectively quantifiable measures found no clear correlation between the use of psychological acceptance and recovery in mental illness as measured by the RAS. The data, however, showed a relationship between psychological acceptance and some components of recovery, thereby demonstrating its possible value in the recovery process. Conclusion. The major contribution of this research was the emerging correlation that was observed between psychological acceptance and positive levels of psychological well-being among individuals with mental illness.

Conceptual versus Perceptual Text Processing Strategies: Differences between Good and Poor Readers.

Science.gov (United States)

Shepard, Charlene R.; Reynolds, Ralph E.

Investigating the selective attention strategy, a study examined the type of attention allocated to important information by good and poor readers. Also tested was the methodological validity of using a conceptual (word recognition) perceptual (tachistoscopic word flash) task as a means of investigating the types of information processing that may…

Investigation of the colour recovery processes in irradiated 'red acrylic' dosimeters

International Nuclear Information System (INIS)

Patko, J.; Beke, D.L.

1991-01-01

The kinetics of the colour recovery processes in irradiated 'Red Acrylic' dosimeters was studied. It was found that the decay is due to diffusion of oxygen into the matrix and a thermal decay takes place, too. The diffusion processes result in the appearance of a clear surface layer which becomes thicker and thicker. This layer is separated by a sharp boundary surface from the dark region. The activation energy of the oxygen diffusion was determined from the kinetics. In samples irradiated and heat-treated in noble gas this process does not take place but it was observed that in pure oxygen, chlorine and in air the colour recovery was similar. (author) 8 refs.; 3 figs

Professional Learning Community Process in the United States: Conceptualization of the Process and District Support for Schools

Science.gov (United States)

Olivier, Dianne F.; Huffman, Jane B.

2016-01-01

As the Professional Learning Community (PLC) process becomes embedded within schools, the level of district support has a direct impact on whether schools have the ability to re-culture and sustain highly effective collaborative practices. The purpose of this article is to share a professional learning community conceptual framework from the US,…

A conceptual persistent healthcare quality improvement process for software development management.

Science.gov (United States)

Lin, Jen-Chiun; Su, Mei-Ju; Cheng, Po-Hsun; Weng, Yung-Chien; Chen, Sao-Jie; Lai, Jin-Shin; Lai, Feipei

2007-01-01

This paper illustrates a sustained conceptual service quality improvement process for the management of software development within a healthcare enterprise. Our proposed process is revised from Niland's healthcare quality information system (HQIS). This process includes functions to survey the satisfaction of system functions, describe the operation bylaws on-line, and provide on-demand training. To achieve these goals, we integrate five information systems in National Taiwan University Hospital, including healthcare information systems, health quality information system, requirement management system, executive information system, and digital learning system, to form a full Deming cycle. A preliminary user satisfaction survey showed that our outpatient information system scored an average of 71.31 in 2006.

Valuable metals - recovery processes, current trends, and recycling strategies

Energy Technology Data Exchange (ETDEWEB)

Froehlich, Peter; Lorenz, Tom; Martin, Gunther; Brett, Beate; Bertau, Martin [Institut fuer Technische Chemie, TU Bergakademie Freiberg, Leipziger Strasse 29, 09599, Freiberg (Germany)

2017-03-01

This Review provides an overview of valuable metals, the supply of which has been classified as critical for Europe. Starting with a description of the current state of the art, novel approaches for their recovery from primary resources are presented as well as recycling processes. The focus lies on developments since 2005. Chemistry strategies which are used in metal recovery are summarized on the basis of the individual types of deposit and mineral. In addition, the economic importance as well as utilization of the metals is outlined. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

Selection and application of effective LNAPL recovery techniques

International Nuclear Information System (INIS)

Fulton, D.E.

1996-01-01

The accumulation of light non-aqueous phase liquids (LNAPL) such as gasoline, diesel, fuel oil and lubricating oil resulting from historical or catastrophic releases, is present at numerous industrial and hazardous waste sites. Initiating LNAPL removal is the first step in remediating impacted groundwater with the LNAPL recovery process having a profound effect on the ability to cost effectively achieve site closure. In many cases, LNAPL recovery precedes full-scale groundwater design activities or even final site characterization due to regulatory compliance issues. Therefore, the timely and effective implementation of a LNAPL recovery system can result in reduced project costs by mitigating further plume migration, achieving maximum volume of recoverable hydrocarbons, eliminating the source area associated with dissolved phase contamination, and allowing comprehensive groundwater remediation to be employed sooner. Effective LNAPL recovery systems begin with evaluating a number of site-specific parameters to quantify the physical characteristics of the type of LNAPL to be recovered, the hydrogeological environment, LNAPL, plume geometry, and the specified client or regulatory cleanup goals. These parameters are discussed along with their significance in developing a conceptual understanding of the site

DEVELOPMENT AND OPTIMIZATION OF GAS-ASSISTED GRAVITY DRAINAGE (GAGD) PROCESS FOR IMPROVED LIGHT OIL RECOVERY

Energy Technology Data Exchange (ETDEWEB)

Dandina N. Rao; Subhash C. Ayirala; Madhav M. Kulkarni; Amit P. Sharma

2004-10-01

This report describes the progress of the project ''Development and Optimization of Gas-Assisted Gravity Drainage (GAGD) Process for Improved Light Oil Recovery'' for the duration of the second project year (October 1, 2003--September 30, 2004). There are three main tasks in this research project. Task 1 is scaled physical model study of GAGD process. Task 2 is further development of vanishing interfacial tension (VIT) technique for miscibility determination. Task 3 is determination of multiphase displacement characteristics in reservoir rocks. In Section I, preliminary design of the scaled physical model using the dimensional similarity approach has been presented. Scaled experiments on the current physical model have been designed to investigate the effect of Bond and capillary numbers on GAGD oil recovery. Experimental plan to study the effect of spreading coefficient and reservoir heterogeneity has been presented. Results from the GAGD experiments to study the effect of operating mode, Bond number and capillary number on GAGD oil recovery have been reported. These experiments suggest that the type of the gas does not affect the performance of GAGD in immiscible mode. The cumulative oil recovery has been observed to vary exponentially with Bond and capillary numbers, for the experiments presented in this report. A predictive model using the bundle of capillary tube approach has been developed to predict the performance of free gravity drainage process. In Section II, a mechanistic Parachor model has been proposed for improved prediction of IFT as well as to characterize the mass transfer effects for miscibility development in reservoir crude oil-solvent systems. Sensitivity studies on model results indicate that provision of a single IFT measurement in the proposed model is sufficient for reasonable IFT predictions. An attempt has been made to correlate the exponent (n) in the mechanistic model with normalized solute compositions present in

A novel process for recovery of fermentation-derived succinic acid: process design and economic analysis.

Science.gov (United States)

Orjuela, Alvaro; Orjuela, Andrea; Lira, Carl T; Miller, Dennis J

2013-07-01

Recovery and purification of organic acids produced in fermentation constitutes a significant fraction of total production cost. In this paper, the design and economic analysis of a process to recover succinic acid (SA) via dissolution and acidification of succinate salts in ethanol, followed by reactive distillation to form succinate esters, is presented. Process simulation was performed for a range of plant capacities (13-55 million kg/yr SA) and SA fermentation titers (50-100 kg/m(3)). Economics were evaluated for a recovery system installed within an existing fermentation facility producing succinate salts at a cost of $0.66/kg SA. For a SA processing capacity of 54.9 million kg/yr and a titer of 100 kg/m(3) SA, the model predicts a capital investment of $75 million and a net processing cost of $1.85 per kg SA. Required selling price of diethyl succinate for a 30% annual return on investment is $1.57 per kg. Copyright © 2013 Elsevier Ltd. All rights reserved.

COPEWELL: A Conceptual Framework and System Dynamics Model for Predicting Community Functioning and Resilience After Disasters.

Science.gov (United States)

Links, Jonathan M; Schwartz, Brian S; Lin, Sen; Kanarek, Norma; Mitrani-Reiser, Judith; Sell, Tara Kirk; Watson, Crystal R; Ward, Doug; Slemp, Cathy; Burhans, Robert; Gill, Kimberly; Igusa, Tak; Zhao, Xilei; Aguirre, Benigno; Trainor, Joseph; Nigg, Joanne; Inglesby, Thomas; Carbone, Eric; Kendra, James M

2018-02-01

Policy-makers and practitioners have a need to assess community resilience in disasters. Prior efforts conflated resilience with community functioning, combined resistance and recovery (the components of resilience), and relied on a static model for what is inherently a dynamic process. We sought to develop linked conceptual and computational models of community functioning and resilience after a disaster. We developed a system dynamics computational model that predicts community functioning after a disaster. The computational model outputted the time course of community functioning before, during, and after a disaster, which was used to calculate resistance, recovery, and resilience for all US counties. The conceptual model explicitly separated resilience from community functioning and identified all key components for each, which were translated into a system dynamics computational model with connections and feedbacks. The components were represented by publicly available measures at the county level. Baseline community functioning, resistance, recovery, and resilience evidenced a range of values and geographic clustering, consistent with hypotheses based on the disaster literature. The work is transparent, motivates ongoing refinements, and identifies areas for improved measurements. After validation, such a model can be used to identify effective investments to enhance community resilience. (Disaster Med Public Health Preparedness. 2018;12:127-137).

Antioxidants, mechanisms, and recovery by membrane processes.

Science.gov (United States)

Bazinet, Laurent; Doyen, Alain

2017-03-04

Antioxidants molecules have a great interest for bio-food and nutraceutical industries since they play a vital role for their capacity to reduce oxidative processes. Consequently, these molecules, generally present in complex matrices, have to be fractionated and purified to characterize them and to test their antioxidant activity. However, as natural or synthetics antioxidant molecules differ in terms of structural composition and physico-chemical properties, appropriate separation technologies must be selected. Different fractionation technologies are available but the most commonly used are filtration processes. Indeed, these technologies allow fractionation according to molecular size (pressure-driven processes), charge, or both size and charge (electrically driven processes). In this context, and after summarizing the reaction mechanisms of the different classes and nature of antioxidants as well as membrane fractionation technologies, this manuscript presents the specific applications of these membranes processes for the recovery of antioxidant molecules.

Medication-assisted recovery from opioid addiction: historical and contemporary perspectives.

Science.gov (United States)

White, William L

2012-01-01

Recovery is being used as a conceptual fulcrum for the redesign of addiction treatment and related support services in the United States. Efforts by policy, research, and clinical leaders to define recovery and calls for assertive models of long-term recovery management raise critical questions about how transformation efforts of recovery-focused systems will affect the pharmacotherapeutic treatment of opioid addiction and the status of patients participating in such treatment. This article highlights recent work advocating a recovery-oriented approach to medication-assisted treatment.

Conceptual processing in music as revealed by N400 effects on words and musical targets.

Science.gov (United States)

Daltrozzo, Jérôme; Schön, Daniele

2009-10-01

The cognitive processing of concepts, that is, abstract general ideas, has been mostly studied with language. However, other domains, such as music, can also convey concepts. Koelsch et al. [Koelsch, S., Kasper, E., Sammler, D., Schulze, K., Gunter, T., & Friederici, A. D. Music, language and meaning: Brain signatures of semantic processing. Nature Neuroscience, 7, 302-307, 2004] showed that 10 sec of music can influence the semantic processing of words. However, the length of the musical excerpts did not allow the authors to study the effect of words on musical targets. In this study, we decided to replicate Koelsch et al. findings using 1-sec musical excerpts (Experiment 1). This allowed us to study the reverse influence, namely, of a linguistic context on conceptual processing of musical excerpts (Experiment 2). In both experiments, we recorded behavioral and electrophysiological responses while participants were presented 50 related and 50 unrelated pairs (context/target). Experiments 1 and 2 showed a larger N400 component of the event-related brain potentials to targets following a conceptually unrelated compared to a related context. The presence of an N400 effect with musical targets suggests that music may convey concepts. The relevance of these results for the comprehension of music as a structured set of conceptual units and for the domain specificity of the mechanisms underlying N400 effects are discussed.

A conceptual framework for intelligent real-time information processing

Science.gov (United States)

Schudy, Robert

1987-01-01

By combining artificial intelligence concepts with the human information processing model of Rasmussen, a conceptual framework was developed for real time artificial intelligence systems which provides a foundation for system organization, control and validation. The approach is based on the description of system processing terms of an abstraction hierarchy of states of knowledge. The states of knowledge are organized along one dimension which corresponds to the extent to which the concepts are expressed in terms of the system inouts or in terms of the system response. Thus organized, the useful states form a generally triangular shape with the sensors and effectors forming the lower two vertices and the full evaluated set of courses of action the apex. Within the triangle boundaries are numerous processing paths which shortcut the detailed processing, by connecting incomplete levels of analysis to partially defined responses. Shortcuts at different levels of abstraction include reflexes, sensory motor control, rule based behavior, and satisficing. This approach was used in the design of a real time tactical decision aiding system, and in defining an intelligent aiding system for transport pilots.

Modelling of a Naphtha Recovery Unit (NRU with Implications for Process Optimization

Directory of Open Access Journals (Sweden)

Jiawei Du

2018-06-01

Full Text Available The naphtha recovery unit (NRU is an integral part of the processes used in the oil sands industry for bitumen extraction. The principle role of the NRU is to recover naphtha from the tailings for reuse in this process. This process is energy-intensive, and environmental guidelines for naphtha recovery must be met. Steady-state models for the NRU system are developed in this paper using two different approaches. The first approach is a statistical, data-based modelling approach where linear regression models have been developed using Minitab® from plant data collected during a performance test. The second approach involves the development of a first-principles model in Aspen Plus® based on the NRU process flow diagram. A novel refinement to this latter model, called “withdraw and remix”, is proposed based on comparing actual plant data to model predictions around the two units used to separate water and naphtha. The models developed in this paper suggest some interesting ideas for the further optimization of the process, in that it may be possible to achieve the required naphtha recovery using less energy. More plant tests are required to validate these ideas.

Learning Processes of Students in Pre-Vocational Secondary Education: Relations between Goal Orientations, Information Processing Strategies and Development of Conceptual Knowledge

Science.gov (United States)

Koopman, Maaike; Den Brok, Perry; Beijaard, Douwe; Teune, Peter

2011-01-01

The purpose of this study was to investigate relations between goal orientations, information processing strategies and development of conceptual knowledge of pre-vocational secondary education students (n = 719; 14 schools). Students' preferences for certain types of goals and information processing strategies were examined using questionnaires.…

Process for recovery of uranium from wet process phosphoric acid

International Nuclear Information System (INIS)

Wiewiorowski, T.K.; Thornsberry, W.L. Jr.

1978-01-01

Process is claimed for the recovery of uranium from wet process phosphoric acid solution in which an organic extractant, containing uranium values and dissolved iron impurities and comprising a dialkylphosphoric acid and a trialkylphosphine oxide dissolved in a water immiscible organic solvent, is contacted with a substantially iron-free dilute aqueous phosphoric acid to remove said iron impurities. The removed impurities are bled from the system by feeding the resulting iron-loaded phosphoric acid to a secondary countercurrent uranium extraction operation from which they leave as part of the uranium-depleted acid raffinate. Also, process for recovering uranium in which the extractant, after it has been stripped of uranium values by aqueous ammonium carbonate, is contacted with a dilute aqueous acid selected from the group consisting of H 2 SO 4 , HCl, HNO 3 and iron-free H 3 PO 4 to improve the extraction efficiency of the organic extractant

International Patients’ Travel Decision Making Process- A Conceptual Framework

Science.gov (United States)

KHAN, Mohammad Jamal; CHELLIAH, Shankar; HARON, Mahmod Sabri

2016-01-01

Background: Role of information source, perceived benefits and risks, and destination image has significantly been examined in travel and tourism literature; however, in medical tourism it is yet to be examined thoroughly. The concept discussed in this article is drawn form well established models in tourism literature. Methods: The purpose of this research was to identify the source of information, travel benefits and perceived risks related to movement of international patients and develop a conceptual model based on well-established theory. Thorough database search (Science Direct, utmj.org, nih.gov, nchu.edu.tw, palgrave-journals, medretreat, Biomedcentral) was performed to fulfill the objectives of the study. Results: International patients always concern about benefits and risks related to travel. These benefits and risks form images of destination in the minds of international patients. Different sources of information make international patients acquaint about the associated benefits and risks, which later leads to development of intention to visit. This conceptual paper helps in establishing model for decision-making process of international patients in developing visit intention. Conclusion: Ample amount of literature is available detailing different factors involved in travel decision making of international patients; however literature explaining relationship between these factors is scarce. PMID:27114978

Waste Processing Cost Recovery at Los Alamos National Laboratory-Analysis and Recommendations

International Nuclear Information System (INIS)

Booth, St. R.

2009-01-01

Los Alamos National Laboratory is implementing full cost recovery for waste processing in fiscal year 2009 (FY2009), after a transition year in FY2008. Waste processing cost recovery has been implemented in various forms across the nuclear weapons complex and in corporate America. The fundamental reasoning of sending accurate price signals to waste generators is economically sound, and leads to waste minimization and reduced waste expense over time. However, Los Alamos faces significant implementation challenges because of its status as a government-owned, contractor-operated national scientific institution with a diverse suite of experimental and environmental cleanup activities, and the fact that this represents a fundamental change in how waste processing is viewed by the institution. This paper describes the issues involved during the transition to cost recovery and the ultimate selection of the business model. Of the six alternative cost recovery models evaluated, the business model chosen to be implemented in FY2009 is Recharge Plus Generators Pay Distributed Direct. Under this model, all generators who produce waste must pay a distributed direct share associated with their specific waste type to use a waste processing capability. This cost share is calculated using the distributed direct method on the fixed cost only, i.e., the fixed cost share is based on each program's forecast proportion of the total Los Alamos volume forecast of each waste type. (Fixed activities are those required to establish the waste processing capability, i.e., to make the process ready, permitted, certified, and prepared to handle the first unit of waste. Therefore, the fixed cost ends at the point just before waste begins to be processed. The activities to actually process the waste are considered variable.) The volume of waste actually sent for processing is charged a unit cost based solely on the variable cost of disposing of that waste. The total cost recovered each year is the

The investigation of the colour recovery processes in irradiated 'Red Acrylic' dosimeters

International Nuclear Information System (INIS)

Patko, J.; Beke, D.L.; Herbak, J.

1983-01-01

The kinetics of the colour recovery processes in irradiated 'Red Acrylic' dosemeters was studied. It was found that the decay is due to diffusion of oxygen into the matrix and there is also a thermal decay. The diffusion process results in the appearance of a clear surface layer which becomes more and more thick. This layer is separated with a sharp boundary surface from the dark region. The activation energy of the oxygen diffusion was determined from the kinetics. With samples irradiated and heat-treated in noble gas, the process does not take place, but in pure oxygen, chlorine, and in air the colour recovery was similar. (author)

Ecological recovery in ERA

DEFF Research Database (Denmark)

EFSA Scientific Committee (Scientific Committee); Topping, Christopher John

2016-01-01

knowledge and data retrieved from the literature. Finally, the information presented in this opinion was reviewed by experts from the relevant EFSA Panels, European risk assessment bodies and through an open consultation requesting input from stakeholders. A conceptual framework was developed to address...... recognises the importance of more integrated ERAs considering both the local and landscape scales, as well as the possible co-occurrence of multiple potential stressors that fall under the remit of EFSA, which are important when addressing ecological recovery. In this scientific opinion, the Scientific...... Committee gathered scientific knowledge on the potential for the recovery of non-target organisms for the further development of ERA. Current EFSA guidance documents and opinions were reviewed on how ecological recovery is addressed in ERA schemes. In addition, this scientific opinion is based on expert...

Protein recovery from inclusion bodies of Escherichia coli using mild solubilization process.

Science.gov (United States)

Singh, Anupam; Upadhyay, Vaibhav; Upadhyay, Arun Kumar; Singh, Surinder Mohan; Panda, Amulya Kumar

2015-03-25

Formation of inclusion bodies in bacterial hosts poses a major challenge for large scale recovery of bioactive proteins. The process of obtaining bioactive protein from inclusion bodies is labor intensive and the yields of recombinant protein are often low. Here we review the developments in the field that are targeted at improving the yield, as well as quality of the recombinant protein by optimizing the individual steps of the process, especially solubilization of the inclusion bodies and refolding of the solubilized protein. Mild solubilization methods have been discussed which are based on the understanding of the fact that protein molecules in inclusion body aggregates have native-like structure. These methods solubilize the inclusion body aggregates while preserving the native-like protein structure. Subsequent protein refolding and purification results in high recovery of bioactive protein. Other parameters which influence the overall recovery of bioactive protein from inclusion bodies have also been discussed. A schematic model describing the utility of mild solubilization methods for high throughput recovery of bioactive protein has also been presented.

Symbolic healing of early psychosis: psychoeducation and sociocultural processes of recovery.

Science.gov (United States)

Larsen, John Aggergaard

2007-09-01

This article analyzes sociocultural processes of recovery in a Danish mental health service providing two years of integrated biopsychosocial treatment following first-episode psychosis. The study is based on ethnographic research in the service and person-centered involvement with 15 clients. The analysis applies Dow's [1986 American Anthropologist 88:56-69] model of universal components of symbolic healing to elucidate sociocultural aspects of therapeutic efficacy that are alternatively disregarded as placebo or nonspecific effects. It is demonstrated how staff engaged with clients to deliver "psychoeducation" that provided scientific and biomedical theories about mental illness, constituting a shared "mythic world" that was accepted as an experiential truth and used to explain clients' illness experiences. The analysis highlights the need to supplement attention in Dow's model to the healing procedure with consideration of variability in the healing process. Depending on individual responses to the intervention, the staff's professional backgrounds and staff-client relationships different recovery models were applied. One suggested "episodic psychosis" and full recovery, and the other suggested "chronic schizophrenia" and the necessity of comprehensive life adjustments to the mental illness. The recovery models influenced clients' perspectives on illness and self as they engaged in identity work, negotiating future plans and individual life projects by including also alternative systems of explanation from the wider cultural repertoire.

Investigation of Multiscale and Multiphase Flow, Transport and Reaction in Heavy Oil Recovery Process

Energy Technology Data Exchange (ETDEWEB)

Yortsos, Yanis C.; Akkutlu, Yucel; Amilik, Pouya; Kechagia, Persefoni; Lu, Chuan; Shariati, Maryam; Tsimpanogiannis, Ioannis; Zhan, Lang

2000-01-19

The emphasis of this work was on investigating the mechanisms and factors that control the recovery of heavy oil, with the objective to improve recovery efficiencies. For this purpose, the interaction of flow, transport and reaction at various scales (from the pore-network to the field scales) were studied. Particular mechanisms investigated included the onset of gas flow in foamy oil production and in in-situ steam drive, gravity drainage in steam process, the development of sustained combustion fronts and the propagation of foams in porous media. Analytical, computational and experimental methods were utilized to advance the state of the art in heavy oil recovery. Successful completion of this research was expected to lead to improvements in the recovery efficiency of various heavy oil processes.

A Conceptual Model of the Cognitive Processing of Environmental Distance Information

Science.gov (United States)

Montello, Daniel R.

I review theories and research on the cognitive processing of environmental distance information by humans, particularly that acquired via direct experience in the environment. The cognitive processes I consider for acquiring and thinking about environmental distance information include working-memory, nonmediated, hybrid, and simple-retrieval processes. Based on my review of the research literature, and additional considerations about the sources of distance information and the situations in which it is used, I propose an integrative conceptual model to explain the cognitive processing of distance information that takes account of the plurality of possible processes and information sources, and describes conditions under which particular processes and sources are likely to operate. The mechanism of summing vista distances is identified as widely important in situations with good visual access to the environment. Heuristics based on time, effort, or other information are likely to play their most important role when sensory access is restricted.

Chromic acid recovery by electro-electrodialysis. II. Pilot scal process, development, and optimization

NARCIS (Netherlands)

Frenzel, I.; Frenzel, I.; Holdik, H.; Stamatialis, Dimitrios; Pourcelly, G.; Wessling, Matthias

2005-01-01

Electro-electrodialysis is a promising technology for chromic acid recovery and static rinse water purification. It combines the recovery of the plating chemicals from rinse water, the elimination of metallic impurities from the process and rinse water treatment in one step. Previous industrial use

Conceptual size in developmental dyscalculia and dyslexia.

Science.gov (United States)

Gliksman, Yarden; Henik, Avishai

2018-02-01

People suffering from developmental dyscalculia (DD) are known to have impairment in numerical abilities and have been found to have weaker processing of countable magnitudes. However, not much research was done on their abilities to process noncountable magnitudes. An example of noncountable magnitude is conceptual size (e.g., mouse is small and elephant is big). Recently, we found that adults process conceptual size automatically. The current study examined automatic processing of conceptual size in students with DD and developmental dyslexia. Conceptual and physical sizes were manipulated orthogonally to create congruent (e.g., a physically small apple compared to a physically large violin) and incongruent (e.g., a physically large apple compared to a physically small violin) conditions. Participants were presented with 2 objects and had to choose the larger one. Each trial began with an instruction to respond to the physical or to the conceptual dimension. Control and the dyslexic groups presented automatic processing of both conceptual and physical sizes. The dyscalculic group presented automatic processing of physical size but not automaticity of processing conceptual size. Our results fit with previous findings of weaker magnitude representation in those with DD, specifically regarding noncountable magnitudes, and support theories of a shared neurocognitive substrate for different types of magnitudes. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Advanced heat pump for the recovery of volatile organic compounds

Energy Technology Data Exchange (ETDEWEB)

1992-03-01

Emissions of Volatile Organic Compounds (VOC) from stationary industrial and commercial sources represent a substantial portion of the total US VOC emissions. The Toxic-Release Inventory'' of The US Environmental Protection Agency estimates this to be at about 3 billion pounds per year (1987 estimates). The majority of these VOC emissions are from coating processes, cleaning processes, polymer production, fuel production and distribution, foam blowing,refrigerant production, and wood products production. The US Department of Energy's (DOE) interest in the recovery of VOC stems from the energy embodied in the recovered solvents and the energy required to dispose of them in an environmentally acceptable manner. This Phase I report documents 3M's work in close working relationship with its subcontractor Nuclear Consulting Services (Nucon) for the preliminary conceptual design of an advanced Brayton cycle heat pump for the recovery of VOC. Nucon designed Brayton cycle heat pump for the recovery of methyl ethyl ketone and toluene from coating operations at 3M Weatherford, OK, was used as a base line for the work under cooperative agreement between 3M and ODE. See appendix A and reference (4) by Kovach of Nucon. This cooperative agreement report evaluates and compares an advanced Brayton cycle heat pump for solvent recovery with other competing technologies for solvent recovery and reuse. This advanced Brayton cycle heat pump is simple (very few components), highly reliable (off the shelf components), energy efficient and economically priced.

National waste terminal storage conceptual reference repository description

International Nuclear Information System (INIS)

Odgers, I.L.; Collings, J.L.

1981-01-01

The conceptual reference repository description (CRRD) discusses, from a conceptual engineering standpoint, the structures, systems, equipment, and operations necessary to: (1) receive unreprocessed spent fuel assemblies in standard casks; (2) unload these assemblies; (3) place them in canisters; (4) transport the canisters to underground storage locations in the salt dome; and (5) place the canisters in terminal storage. The CRRD also elaborates on the concepts for retrieval and recovery of the spent fuel after burial and describes the development of the shafts and the underground areas, as well as the supporting operational utility and administrative features of the repository

Learning processes of students pre-vocational secondary education: relations between goal orientations, information processing strategies and development of conceptual knowledge

NARCIS (Netherlands)

Koopman, M.; Brok, den P.J.; Beijaard, D.; Teune, P.J.

2011-01-01

The purpose of this study was to investigate relations between goal orientations, information processing strategies and development of conceptual knowledge of pre-vocational secondary education students (n = 719; 14 schools). Students' preferences for certain types of goals and information

Association of solvent extraction and liquid-liquid flotation processes for metal recovery

International Nuclear Information System (INIS)

Puget, Flavia P.; Mendonca, Luciano A. de; Massarani, Giulio

2000-01-01

From the batch solvent extraction process, in this work it has been carried out a preliminary study aiming the determination of the optimal operating conditions for zirconium recovery (10 ppm) using alamine 336 (tricaprylylamine) as extractor. The results have shown that the extraction takes place instantaneously (5s of manual agitation) and that at pH around 2.0 the extraction efficiency is up to 98-99% for an aqueous/organic phase volumetric ratio of 10. Based on these results, it is proposed to evaluate the possibility of using of a pioneering technology for metal recovery at low concentrations, using a experimental set-up that associates standard solvent extraction process with liquid-liquid flotation process. (author)

Gist-based conceptual processing of pictures remains intact in patients with amnestic mild cognitive impairment.

Science.gov (United States)

Deason, Rebecca G; Hussey, Erin P; Budson, Andrew E; Ally, Brandon A

2012-03-01

The picture superiority effect, better memory for pictures compared to words, has been found in young adults, healthy older adults, and, most recently, in patients with Alzheimer's disease and mild cognitive impairment. Although the picture superiority effect is widely found, there is still debate over what drives this effect. One main question is whether it is enhanced perceptual or conceptual information that leads to the advantage for pictures over words. In this experiment, we examined the picture superiority effect in healthy older adults and patients with amnestic mild cognitive impairment (MCI) to better understand the role of gist-based conceptual processing. We had participants study three exemplars of categories as either words or pictures. In the test phase, participants were again shown pictures or words and were asked to determine whether the item was in the same category as something they had studied earlier or whether it was from a new category. We found that all participants demonstrated a robust picture superiority effect, better performance for pictures than for words. These results suggest that the gist-based conceptual processing of pictures is preserved in patients with MCI. While in healthy older adults preserved recollection for pictures could lead to the picture superiority effect, in patients with MCI it is most likely that the picture superiority effect is a result of spared conceptually based familiarity for pictures, perhaps combined with their intact ability to extract and use gist information.

Energy efficiency improvement of a Kraft process through practical stack gases heat recovery

International Nuclear Information System (INIS)

Mostajeran Goortani, B.; Mateos-Espejel, E.; Moshkelani, M.; Paris, J.

2011-01-01

A process scheme for the optimal recovery of heat from stack gases considering energy and technical constraints has been developed and applied to an existing Kraft pulping mill. A system based on a closed loop recirculation of hot oil is used to recover the heat from stack gases and distribute it to the appropriate cold streams. The recovery of heat from stack gases is part of an overall optimization of the Kraft mill. Tools such as Pinch Analysis and exergy analysis are used to evaluate the process streams. The results indicate that 10.8 MW of heat from stack gases can be reused to heat process streams such as the deaerator water, hot water, drying filtrates, and black liquor. A simulation model of the recirculation loop has been developed to determine the specifications of the recovery system. The total heat exchanger surface area required by the system is 3460 m 2 , with a hot oil recirculation temperature of 137 o C. The anticipated total investment is $10.3 M, with a payback time of 1.8 years. - Highlights: → We developed a process design for recovering heat from stack gases in a Kraft mill. → The recovered heat is optimally distributed to the process cold streams. → Heat recovery system has a total surface area of 3500 m 2 without gases condensation. → A reduction of 7 percent in total process steam demand is anticipated. → A total investment of 10.3 M$ is needed with a payback time of less than two years

Psychiatric diagnoses are not mental processes: Wittgenstein on conceptual confusion.

Science.gov (United States)

Rosenman, Stephen; Nasti, Julian

2012-11-01

Empirical explanation and treatment repeatedly fail for psychiatric diagnoses. Diagnosis is mired in conceptual confusion that is illuminated by Ludwig Wittgenstein's later critique of philosophy (Philosophical Investigations). This paper examines conceptual confusions in the foundation of psychiatric diagnosis from some of Wittgenstein's important critical viewpoints. Diagnostic terms are words whose meanings are given by usages not definitions. Diagnoses, by Wittgenstein's analogy with 'games', have various and evolving usages that are connected by family relationships, and no essence or core phenomenon connects them. Their usages will change according to the demands and contexts in which they are employed. Diagnoses, like many psychological terms, such as 'reading' or 'understanding', are concepts that refer not to fixed behavioural or mental states but to complex apprehensions of the relationship of a variety of behavioural phenomena with the world. A diagnosis is a sort of concept that cannot be located in or explained by a mental process. A diagnosis is an exercise in language and its usage changes according to the context and the needs it addresses. Diagnoses have important uses but they are irreducibly heterogeneous and cannot be identified with or connected to particular mental processes or even with a unity of phenomena that can be addressed empirically. This makes understandable not only the repeated failure of empirical science to replicate or illuminate genetic, neurophysiologic, psychic or social processes underlying diagnoses but also the emptiness of a succession of explanatory theories and treatment effects that cannot be repeated or stubbornly regress to the mean. Attempts to fix the meanings of diagnoses to allow empirical explanation will and should fail as there is no foundation on which a fixed meaning can be built and it can only be done at the cost of the relevance and usefulness of diagnosis.

Conceptualizing the therapist's role in therapy in psychosis.

Science.gov (United States)

Dilks, Sarah; Tasker, Fiona; Wren, Bernadette

2013-09-01

This paper reports on a subset of findings from a wider ranging grounded theory analysis of therapy and recovery processes in psychosis. It describes therapist activities involved in maintaining an observational perspective during therapy and the links between these and other therapist activities. Grounded theory was used to examine the qualitative data collected. An initial sample of 19 taped therapy sessions and 23 interviews with psychologists and their clients was collected. This sample was extended through the collection of three further interviews with psychoanalytically aware psychologists. The data were analysed using grounded theory. A grounded theory model of therapy processes in psychosis was developed that conceptualized therapist actions as providing an observational scaffold to support the client's efforts in moving to new perspectives on their situation. Consistent with the understanding of the core therapy activity as a dialogical process, this set of therapist actions was understood as occurring alongside other therapist activities involved in managing emotion and building a relationship in therapy. The central activity of therapy in psychosis was understood as a dialogical process continuously negotiated between therapist and client in conversation and was conceptually summarized in the grounded theory as 'building bridges to observational perspectives'. However, the active and strategic efforts of psychologists to sustain the dialogue implied a particular assumption of responsibility for maintaining this process. In particular, therapists appeared to be 'working to maintain observational perspectives', 'managing emotion', and 'doing relationship' during the therapy conversation as part of the joint effort with clients to build bridges to new observational perspectives on distress and psychosis. © 2012 The British Psychological Society.

Learning processes of students in competence-based pre-vocational secondary education: relations between goal orientations, information processing strategies and development of conceptual knowledge

NARCIS (Netherlands)

Dr. M. Koopman; prof dr Douwe Beijaard; Dr P.J. Teune; P. den Brok

2011-01-01

The purpose of this study was to investigate relations between goal orientations, information processing strategies and development of conceptual knowledge of pre-vocational secondary education students (n=719; 14 schools). Students' preferences for certain types of goals and information processing

Recovery of uranium in the production of concentrated phosphoric acid by a hemihydrate process

International Nuclear Information System (INIS)

Nakajima, S.; Miyamoto, M.

1983-01-01

Nissan Chemical Industries as manufacturers of phosphoric acid have studied the recovery of uranium, based on a concentrated phosphoric acid production process. The process consists of two stages, a hemihydrate stage with a formation of hemihydrate and a filtration section, followed by a dihydrate stage with hydration and a filtration section. In the hemihydrate stage, phosphate is treated with a mixture of phosphoric acid and sulphuric acid to produce phosphoric acid and hydrous calcium sulphate; the product is recovered in the filtration section and its concentration is 40-50% P 2 O 3 . In the dihydrate stage, the hemihydrate is transformed by re-dissolution and hydration, producing hydrous calcium sulphate, i.e. gypsum. This process therefore comprises two parts, each with different acid concentrations. As the extraction of uranium is easier in the case of a low concentration of phosphoric acid, the process consists of the recovery of uranium starting from the filtrate of the hydration section. The tests have shown that the yield of recovery of uranium was of the order of 80% disregarding the handling losses and no disadvantageous effect has been found in the combination of the process of uranium extraction with the process of concentrated phosphoric acid production. Compared with the classical process where uranium is recovered from acid with 30% P 2 O 5 , the process of producing high-concentration phosphoric acid such as the Nissan process, in which the uranium recovery is effected from acid with 15% P 2 O 5 from the hydration section, presents many advantages [fr

Biodiesel production process from microalgae oil by waste heat recovery and process integration.

Science.gov (United States)

Song, Chunfeng; Chen, Guanyi; Ji, Na; Liu, Qingling; Kansha, Yasuki; Tsutsumi, Atsushi

2015-10-01

In this work, the optimization of microalgae oil (MO) based biodiesel production process is carried out by waste heat recovery and process integration. The exergy analysis of each heat exchanger presented an efficient heat coupling between hot and cold streams, thus minimizing the total exergy destruction. Simulation results showed that the unit production cost of optimized process is 0.592$/L biodiesel, and approximately 0.172$/L biodiesel can be avoided by heat integration. Although the capital cost of the optimized biodiesel production process increased 32.5% and 23.5% compared to the reference cases, the operational cost can be reduced by approximately 22.5% and 41.6%. Copyright © 2015 Elsevier Ltd. All rights reserved.

In-situ water vaporization improves bitumen production during electrothermal processes

Energy Technology Data Exchange (ETDEWEB)

Wang, J. [Calgary Univ., AB (Canada); McGee, B. [E-T Energy, Calgary, AB (Canada); Kantzas, A. [Calgary Univ., AB (Canada). Tomographic Imaging and Porous Media Laboratory

2008-10-15

Electro-thermal processes are now being considered as an alternative or complementary process to steam injection processes. This study used an in situ vaporized water process to optimize electrothermal processes for steam injection enhanced oil recovery (EOR). A simulation tool was used to model electro-thermal processes in an Athabasca oil sands reservoir. Incremental oil recovery was estimated based on a 3-block conceptual model. A field scale model was then used to investigate the effects of electrode spacing, water injection rates, and electrical heating rates on bitumen recovery. Results of the simulation studies were then analyzed using a statistical tool in order to determine optimal conditions for maximizing bitumen production. Results of the study showed that incremental recovery using the water vaporization technique resulted in oil recovery rates of 25 per cent original oil in place (OOIP). Sensitivity analyses showed that medium electrical heating rates, low water injection rates, and small spacings between electrodes maximized bitumen production rates. It was concluded that the technique can be used alone or combined with other methods to economically produce bitumens. 2 refs., 7 tabs., 9 figs.

Processes of recovery through routine or specialist treatment for borderline personality disorder (BPD): a qualitative study.

Science.gov (United States)

Katsakou, Christina; Pistrang, Nancy; Barnicot, Kirsten; White, Hayley; Priebe, Stefan

2017-07-04

Recovery processes in borderline personality disorder (BPD) are poorly understood. This study explored how recovery in BPD occurs through routine or specialist treatment, as perceived by service users (SUs) and therapists. SUs were recruited from two specialist BPD services, three community mental health teams, and one psychological therapies service. Semi-structured interviews were conducted with 48 SUs and 15 therapists. The "framework" approach was used to analyse the data. The findings were organized into two domains of themes. The first domain described three parallel processes that constituted SUs' recovery journey: fighting ambivalence and committing to taking action; moving from shame to self-acceptance and compassion; and moving from distrust and defensiveness to opening up to others. The second domain described four therapeutic challenges that needed to be addressed to support this journey: balancing self-exploration and finding solutions; balancing structure and flexibility; confronting interpersonal difficulties and practicing new ways of relating; and balancing support and independence. Therapies facilitating the identified processes may promote recovery. The recovery processes and therapeutic challenges identified in this study could provide a framework to guide future research.

Furnace and Heat Recovery Area Design and Analysis for Conceptual Design of Supercritical O2-Based PC Boiler

International Nuclear Information System (INIS)

Andrew Seltzer

2006-01-01

The objective of the furnace and heat recovery area design and analysis task of the Conceptual Design of Supercritical Oxygen-Based PC Boiler study is to optimize the location and design of the furnace, burners, over-fire gas ports, and internal radiant surfaces. The furnace and heat recovery area were designed and analyzed using the FW-FIRE, Siemens, and HEATEX computer programs. The furnace is designed with opposed wall-firing burners and over-fire air ports. Water is circulated in the furnace by forced circulation to the waterwalls at the periphery and divisional wall panels within the furnace. Compared to the air-fired furnace, the oxygen-fired furnace requires only 65% of the surface area and 45% of the volume. Two oxygen-fired designs were simulated: (1) with cryogenic air separation unit (ASU) and (2) with oxygen ion transport membrane (OITM). The maximum wall heat flux in the oxygen-fired furnace is more than double that of the air-fired furnace due to the higher flame temperature and higher H 2 O and CO 2 concentrations. The coal burnout for the oxygen-fired case is 100% due to a 500 F higher furnace temperature and higher concentration of O 2 . Because of the higher furnace wall temperature of the oxygen-fired case compared to the air-fired case, furnace water wall material was upgraded from T2 to T92. Compared to the air-fired heat recovery area (HRA), the oxygen-fired HRA total heat transfer surface is 35% less for the cryogenic design and 13% less for the OITM design due to more heat being absorbed in the oxygen-fired furnace and the greater molecular weight of the oxygen-fired flue gas. The HRA tube materials and wall thickness are nearly the same for the air-fired and oxygen-fired design since the flue gas and water/steam temperature profiles encountered by the heat transfer banks are similar

Reshaping an enduring sense of self: the process of recovery from a first episode of schizophrenia.

Science.gov (United States)

Romano, Donna M; McCay, Elizabeth; Goering, Paula; Boydell, Katherine; Zipursky, Robert

2010-08-01

Although advances in the treatment of schizophrenia have been made, little is known about the process of recovery from first episode of schizophrenia (FES). To date, the study of recovery in the field of mental health has focused on long-term mental illness. This qualitative study addresses ways in which individuals with FES describe their process of recovery and how identified individuals (e.g. family members) describe their perceptions of and roles in the participant's process of recovery. Charmaz's constructivist grounded theory methodology was used to interview 10 young adults twice who self-identified as recovering from FES. In addition, 10 individuals were identified who had influenced their recovery and were interviewed once, for a total of 30 interviews. Data collection sources included in-depth semi-structured interviews. Data analysis methods were consistent with Charmaz's methodology and included coding, and constant comparison of data. The results provide a substantive theory of the process of recovery from FES that is comprised of the following phases: 'Who they were prior to the illness', 'Lives interrupted: Encountering the illness', 'Engaging in services and supports', 'Re-engaging in life', 'Envisioning the future'; and the core category, 'Re-shaping an enduring sense of self', that occurred throughout all phases. A prominent feature of this model is that participants' enduring sense of self were reshaped rather than reconstructed throughout their recovery. This model of recovery from FES is unique, and as such, provides implications for clinical care, research and policy development for these young adults and their families.

Pushing desalination recovery to the maximum limit: Membrane and thermal processes integration

KAUST Repository

Shahzad, Muhammad Wakil

2017-05-05

The economics of seawater desalination processes has been continuously improving as a result of desalination market expansion. Presently, reverse osmosis (RO) processes are leading in global desalination with 53% share followed by thermally driven technologies 33%, but in Gulf Cooperation Council (GCC) countries their shares are 42% and 56% respectively due to severe feed water quality. In RO processes, intake, pretreatment and brine disposal cost 25% of total desalination cost at 30–35% recovery. We proposed a tri-hybrid system to enhance overall recovery up to 81%. The conditioned brine leaving from RO processes supplied to proposed multi-evaporator adsorption cycle driven by low temperature industrial waste heat sources or solar energy. RO membrane simulation has been performed using WinFlow and IMSDesign commercial softwares developed by GE and Nitto. Detailed mathematical model of overall system is developed and simulation has been conducted in FORTRAN. The final brine reject concentration from tri-hybrid cycle can vary from 166,000ppm to 222,000ppm if RO retentate concentration varies from 45,000ppm to 60,000ppm. We also conducted economic analysis and showed that the proposed tri-hybrid cycle can achieve highest recovery, 81%, and lowest energy consumption, 1.76kWhelec/m3, for desalination reported in the literature up till now.

Developmental differences in explicit and implicit conceptual memory tests: a processing view account.

Science.gov (United States)

Sauzéon, Hélène; Déjos, Marie; Lestage, Philippe; Arvind Pala, Prashant; N'kaoua, Bernard

2012-01-01

The present study addressed contradictory results in childhood literature about conceptual priming. Based on the processing view, two forms of conceptual priming were investigated across two experiments in children aged from 7 to 16: associative priming (using the free-association test) and relational (categorical) priming (using the categorical exemplar generation test) as well as their explicit memory measure counterparts (the associative-cued recall and the category-cued recall). Experiment 1 compared age differences in associative and relational (categorical) priming. Experiment 2 focused on relational (categorical) priming with manipulations of blocked/unblocked words per category. The results showed that (a) associative priming was unchanged in children aged from 7 to 16, whereas relational (categorical) priming improved from 7-9 to 13-16 years old, and (b) age differences in relational (categorical) priming still occurred under unblocked conditions and blocked condition, while age differences in explicit measures were reduced under blocked conditions. These findings were discussed in line with the debate between the system and processing view and in terms of knowledge and automaticity development.

Two-step optimization of pressure and recovery of reverse osmosis desalination process.

Science.gov (United States)

Liang, Shuang; Liu, Cui; Song, Lianfa

2009-05-01

Driving pressure and recovery are two primary design variables of a reverse osmosis process that largely determine the total cost of seawater and brackish water desalination. A two-step optimization procedure was developed in this paper to determine the values of driving pressure and recovery that minimize the total cost of RO desalination. It was demonstrated that the optimal net driving pressure is solely determined by the electricity price and the membrane price index, which is a lumped parameter to collectively reflect membrane price, resistance, and service time. On the other hand, the optimal recovery is determined by the electricity price, initial osmotic pressure, and costs for pretreatment of raw water and handling of retentate. Concise equations were derived for the optimal net driving pressure and recovery. The dependences of the optimal net driving pressure and recovery on the electricity price, membrane price, and costs for raw water pretreatment and retentate handling were discussed.

Selective recovery of gold from waste mobile phone PCBs by hydrometallurgical process

International Nuclear Information System (INIS)

Kim, Eun-young; Kim, Min-seuk; Lee, Jae-chun; Pandey, B.D.

2011-01-01

Highlights: ► Selective leaching of Au from scrap mobile phone PCBs by two stage electro-generated chlorine and recovery by ion exchange. ► Copper leaching (97%) by 1st stage electro-generated leaching (ORP value Ag/AgCl ) with a minor gold (5%). ► Gold leaching (93%, ∼67 mg/L) by 2nd leaching (ORP value >1100 mV Ag/AgCl ) in 0.1 mol/L HCl at 25 °C. ► A concentrated gold solution, 6034 mg/L with 99.9% purity was obtained by ion exchange process. - Abstract: The leaching of gold from the scrap mobile phone PCBs by electro-generated chlorine as an oxidant and its recovery by ion exchange process was investigated. The leaching experiments were carried out by employing separate leaching reactor connected with the anode compartment of a Cl 2 gas generator. The leaching of gold increased with increase in temperature and initial concentration of chlorine, and was favorable even at low concentration of acid, whereas copper leaching increased with increase in concentration of acid and decrease in temperature. In a two-stage leaching process, copper was mostly dissolved (97%) in 165 min at 25 °C during the 1st stage leaching in 2.0 mol/L HCl by electro-generated chlorine at a current density of 714 A/m 2 along with a minor recovery of gold (5%). In the 2nd stage gold was mostly leached out (93% recovery, ∼67 mg/L) from the residue of the 1st stage by the electro-generated chlorine in 0.1 mol/L HCl. Gold recovery from the leach liquor by ion exchange using Amberlite XAD-7HP resin was found to be 95% with the maximum amount of gold adsorbed as 46.03 mg/g resin. A concentrated gold solution, 6034 mg/L with 99.9% purity was obtained in the ion exchange process.

Selective recovery of gold from waste mobile phone PCBs by hydrometallurgical process

Energy Technology Data Exchange (ETDEWEB)

Kim, Eun-young [Department of Material Science and Engineering, Penn State, University Park, PA 16802 (United States); Kim, Min-seuk [Mineral Resources Research Division, Korea Institute of Geoscience and Mineral Resources (KIGAM), Daejeon 305-350 (Korea, Republic of); Lee, Jae-chun, E-mail: jclee@kigam.re.kr [Mineral Resources Research Division, Korea Institute of Geoscience and Mineral Resources (KIGAM), Daejeon 305-350 (Korea, Republic of); Pandey, B.D. [Metal Extraction and Forming Division, National Metallurgical Laboratory (NML), Jamshedpur 831007 (India)

2011-12-30

Highlights: Black-Right-Pointing-Pointer Selective leaching of Au from scrap mobile phone PCBs by two stage electro-generated chlorine and recovery by ion exchange. Black-Right-Pointing-Pointer Copper leaching (97%) by 1st stage electro-generated leaching (ORP value <350 mV{sub Ag/AgCl}) with a minor gold (5%). Black-Right-Pointing-Pointer Gold leaching (93%, {approx}67 mg/L) by 2nd leaching (ORP value >1100 mV{sub Ag/AgCl}) in 0.1 mol/L HCl at 25 Degree-Sign C. Black-Right-Pointing-Pointer A concentrated gold solution, 6034 mg/L with 99.9% purity was obtained by ion exchange process. - Abstract: The leaching of gold from the scrap mobile phone PCBs by electro-generated chlorine as an oxidant and its recovery by ion exchange process was investigated. The leaching experiments were carried out by employing separate leaching reactor connected with the anode compartment of a Cl{sub 2} gas generator. The leaching of gold increased with increase in temperature and initial concentration of chlorine, and was favorable even at low concentration of acid, whereas copper leaching increased with increase in concentration of acid and decrease in temperature. In a two-stage leaching process, copper was mostly dissolved (97%) in 165 min at 25 Degree-Sign C during the 1st stage leaching in 2.0 mol/L HCl by electro-generated chlorine at a current density of 714 A/m{sup 2} along with a minor recovery of gold (5%). In the 2nd stage gold was mostly leached out (93% recovery, {approx}67 mg/L) from the residue of the 1st stage by the electro-generated chlorine in 0.1 mol/L HCl. Gold recovery from the leach liquor by ion exchange using Amberlite XAD-7HP resin was found to be 95% with the maximum amount of gold adsorbed as 46.03 mg/g resin. A concentrated gold solution, 6034 mg/L with 99.9% purity was obtained in the ion exchange process.

Spider Silk Processing for Spidroin Recovery from Crossopriza Lyoni Web

Science.gov (United States)

Mohtar, J. A.; Ooi, W. L.; Yusuf, F.

2018-03-01

Spider silk is a potential biomaterial that can be used in various applications for its outstanding physicomechanical properties attributed by the spidroin composition. Efforts for commercializing spider silks have been mainly focused on the characterization of spidroins from the Entelegyne spiders for exceptional fibre construction. Hence, studies on silk proteins from the Haplogyne species remain neglected. The aim of this study is to isolate spidroin from Crossopriza lyoni web. Silk processing involved the pretreatment of fibres for the shell layer removal from the surface. A screening study was conducted to analyze the effect of temperature, incubation time and agitation speed on spidroin extraction using Ajisawa’s reagent by OFAT analysis followed by statistical optimization of the extraction process via RSM for maximal protein recovery. All parameters exerted significant effect on spidroin recovery (pspider silk to meet the demand for a variety of silk-based products in the near future.

The impact of behavioural factors in the renewable energy investment decision making process: Conceptual framework and empirical findings

International Nuclear Information System (INIS)

Masini, Andrea; Menichetti, Emanuela

2012-01-01

Investments in renewable energy (RE) technologies are regarded with increasing interest as an effective means to stimulate growth and accelerate the recovery from the recent financial crisis. Yet, despite their appeal, and the numerous policies implemented to promote these technologies, the diffusion of RE projects remains somehow below expectations. This limited penetration is also due to a lack of appropriate financing and to a certain reluctance to invest in these technologies. In order to shed light on this phenomenon, in this paper we examine the decision making process underlying investments in RE technologies. We propose and test a conceptual model that examines the structural and behavioural factors affecting the investors decisions as well as the relationship between RE investments and portfolio performance. Applying econometric techniques on primary data collected from a sample of European investors, we study how the investors’ a-priori beliefs, their preferences over policy instruments and their attitude toward technological risk affect the likelihood of investing in RE projects. We also demonstrate that portfolio performance increases with an increase of the RE share in the portfolio. Implications for scholars, investors, technology managers and policy makers are derived and discussed.

In-situ product removal from fermentations by membrane extraction: conceptual process design and economics

NARCIS (Netherlands)

Heerema, L.; Roelands, C.P.M.; Goetheer, E.L.V.; Verdoes, D.; Keurentjes, J.

2011-01-01

This paper describes a conceptual process design for the production of the model component phenol by a recombinant strain of the micro-organism Pseudomonas putida S12. The (bio)production of the inhibiting component phenol in a bioreactor is combined with direct product removal by membrane

Conceptual and non-conceptual repetition priming in category exemplar generation: Evidence from bilinguals.

Science.gov (United States)

Francis, Wendy S; Fernandez, Norma P; Bjork, Robert A

2010-10-01

One measure of conceptual implicit memory is repetition priming in the generation of exemplars from a semantic category, but does such priming transfer across languages? That is, do the overlapping conceptual representations for translation equivalents provide a sufficient basis for such priming? In Experiment 1 (N=96) participants carried out a deep encoding task, and priming between languages was statistically reliable, but attenuated, relative to within-language priming. Experiment 2 (N=96) replicated the findings of Experiment 1 and assessed the contributions of conceptual and non-conceptual processes using a levels-of-processing manipulation. Words that underwent shallow encoding exhibited within-language, but not between-language, priming. Priming in shallow conditions cannot therefore be explained by incidental activation of the concept. Instead, part of the within-language priming effect, even under deep-encoding conditions, is due to increased availability of language-specific lemmas or phonological word forms.

[Development of a Conceptual Framework for the Assessment of Chronic Care in the Spanish National Health System].

Science.gov (United States)

Espallargues, Mireia; Serra-Sutton, Vicky; Solans-Domènech, Maite; Torrente, Elena; Moharra, Montse; Benítez, Dolors; Robles, Noemí; Domíngo, Laia; Escarrabill Sanglas, Joan

2016-07-07

The aim was to develop a conceptual framework for the assessment of new healthcare initiatives on chronic diseases within the Spanish National Health System. A comprehensive literature review between 2002 and 2013, including systematic reviews, meta-analysis, and reports with evaluation frameworks and/or assessment of initiatives was carried out; integrated care initiatives established in Catalonia were studied and described; and semistructured interviews with key stakeholders were performed. The scope and conceptual framework were defined by using the brainstorming approach.Of 910 abstracts identified, a total of 116 studies were included. They referred to several conceptual frameworks and/or assessment indicators at a national and international level. An overall of 24 established chronic care initiatives were identified (9 integrated care initiatives); 10 in-depth interviews were carried out. The proposed conceptual framework envisages: 1)the target population according to complexity levels; 2)an evaluation approach of the structure, processes, and outcomes considering the health status achieved, the recovery process and the maintenance of health; and 3)the dimensions or attributes to be assessed. The proposed conceptual framework will be helpful has been useful to develop indicators and implement them with a community-based and result-oriented approach and a territorial or population-based perspective within the Spanish Health System. This will be essential to know which are the most effective strategies, what are the key elements that determine greater success and what are the groups of patients who can most benefit.

Investigation of Multiscale and Multiphase Flow, Transport and Reaction in Heavy Oil Recovery Processes; SEMIANNUAL

International Nuclear Information System (INIS)

Yorstos, Yanis C.

2002-01-01

The emphasis of this work was on investigating the mechanisms and factors that control the recovery of heavy oil with the objective to improve recovery efficiencies. For this purpose the interaction of flow transport and reaction at various scales from the pore network to the field scales were studied. Particular mechanisms to be investigated included the onset of gas flow in foamy oil production and in in-situ steam drive, gravity drainage in steam processes, the development of sustained combustion fronts and the propagation of foams in porous media. Analytical, computational and experimental methods were utilized to advance the state of the art in heavy oil recovery. Successful completion of this research was expected to lead to improvements in the Recovery efficiency of various heavy oil processes

Downstream extraction process development for recovery of organic acids from a fermentation broth.

Science.gov (United States)

Bekatorou, Argyro; Dima, Agapi; Tsafrakidou, Panagiotia; Boura, Konstantina; Lappa, Katerina; Kandylis, Panagiotis; Pissaridi, Katerina; Kanellaki, Maria; Koutinas, Athanasios A

2016-11-01

The present study focused on organic acids (OAs) recovery from an acidogenic fermentation broth, which is the main problem regarding the use of OAs for production of ester-based new generation biofuels or other applications. Specifically, 10 solvents were evaluated for OAs recovery from aqueous media and fermentation broths. The effects of pH, solvent/OAs solution ratios and application of successive extractions were studied. The 1:1 solvent/OAs ratio showed the best recovery rates in most cases. Butyric and isobutyric acids showed the highest recovery rates (80-90%), while lactic, succinic, and acetic acids were poorly recovered (up to 45%). The OAs recovery was significantly improved by successive 10-min extractions. Alcohols presented the best extraction performance. The process using repeated extractions with 3-methyl-1-butanol led to the highest OAs recovery. However, 1-butanol can be considered as the most cost-effective option taking into account its price and availability. Copyright © 2016 Elsevier Ltd. All rights reserved.

Conceptual dissonance: evaluating the efficacy of natural language processing techniques for validating translational knowledge constructs.

Science.gov (United States)

Payne, Philip R O; Kwok, Alan; Dhaval, Rakesh; Borlawsky, Tara B

2009-03-01

The conduct of large-scale translational studies presents significant challenges related to the storage, management and analysis of integrative data sets. Ideally, the application of methodologies such as conceptual knowledge discovery in databases (CKDD) provides a means for moving beyond intuitive hypothesis discovery and testing in such data sets, and towards the high-throughput generation and evaluation of knowledge-anchored relationships between complex bio-molecular and phenotypic variables. However, the induction of such high-throughput hypotheses is non-trivial, and requires correspondingly high-throughput validation methodologies. In this manuscript, we describe an evaluation of the efficacy of a natural language processing-based approach to validating such hypotheses. As part of this evaluation, we will examine a phenomenon that we have labeled as "Conceptual Dissonance" in which conceptual knowledge derived from two or more sources of comparable scope and granularity cannot be readily integrated or compared using conventional methods and automated tools.

Situated conceptualization and semantic processing: effects of emotional experience and context availability in semantic categorization and naming tasks.

Science.gov (United States)

Moffat, Michael; Siakaluk, Paul D; Sidhu, David M; Pexman, Penny M

2015-04-01

It has been proposed that much of conceptual knowledge is acquired through situated conceptualization, such that both external (e.g., agents, objects, events) and internal (e.g., emotions, introspections) environments are considered important (Barsalou, 2003). To evaluate this proposal, we characterized two dimensions by which situated conceptualization may be measured and which should have different relevance for abstract and concrete concepts; namely, emotional experience (i.e., the ease with which words evoke emotional experience; Newcombe, Campbell, Siakaluk, & Pexman, 2012) and context availability (i.e., the ease with which words evoke contexts in which their referents may appear; Schwanenflugel & Shoben, 1983). We examined the effects of these two dimensions on abstract and concrete word processing in verbal semantic categorization (VSCT) and naming tasks. In the VSCT, emotional experience facilitated processing of abstract words but inhibited processing of concrete words, whereas context availability facilitated processing of both types of words. In the naming task in which abstract words and concrete words were not blocked by emotional experience, context availability facilitated responding to only the abstract words. In the naming task in which abstract words and concrete words were blocked by emotional experience, emotional experience facilitated responding to only the abstract words, whereas context availability facilitated responding to only the concrete words. These results were observed even with several lexical (e.g., frequency, age of acquisition) and semantic (e.g., concreteness, arousal, valence) variables included in the analyses. As such, the present research suggests that emotional experience and context availability tap into different aspects of situated conceptualization and make unique contributions to the representation and processing of abstract and concrete concepts.

Conceptual Frameworks for the Workplace Change Adoption Process: Elements Integration from Decision Making and Learning Cycle Process.

Science.gov (United States)

Radin Umar, Radin Zaid; Sommerich, Carolyn M; Lavender, Steve A; Sanders, Elizabeth; Evans, Kevin D

2018-05-14

Sound workplace ergonomics and safety-related interventions may be resisted by employees, and this may be detrimental to multiple stakeholders. Understanding fundamental aspects of decision making, behavioral change, and learning cycles may provide insights into pathways influencing employees' acceptance of interventions. This manuscript reviews published literature on thinking processes and other topics relevant to decision making and incorporates the findings into two new conceptual frameworks of the workplace change adoption process. Such frameworks are useful for thinking about adoption in different ways and testing changes to traditional intervention implementation processes. Moving forward, it is recommended that future research focuses on systematic exploration of implementation process activities that integrate principles from the research literature on sensemaking, decision making, and learning processes. Such exploration may provide the groundwork for development of specific implementation strategies that are theoretically grounded and provide a revised understanding of how successful intervention adoption processes work.

The effect of level of processing on perceptual and conceptual priming: control versus closed-head-injured patients.

Science.gov (United States)

Vakil, E; Sigal, J

1997-07-01

Twenty-four closed-head-injured (CHI) and 24 control participants studied two word lists under shallow (i.e., nonsemantic) and deep (i.e., semantic) encoding conditions. They were then tested on free recall, perceptual priming (i.e., perceptual partial word identification) and conceptual priming (i.e., category production) tasks. Previous findings have demonstrated that memory in CHI is characterized by inefficient conceptual processing of information. It was thus hypothesized that the CHI participants would perform more poorly than the control participants on the explicit and on the conceptual priming tasks. On these tasks the CHI group was expected to benefit to a lesser degree from prior deep encoding, as compared to controls. The groups were not expected to significantly differ from each other on the perceptual priming task. Prior deep encoding was not expected to improve the perceptual priming performance of either group. All findings were as predicted, with the exception that a significant effect was not found between groups for deep encoding in the conceptual priming task. The results are discussed (1) in terms of their theoretical contribution in further validating the dissociation between perceptual and conceptual priming; and (2) in terms of the contribution in differentiating between amnesic and CHI patients. Conceptual priming is preserved in amnesics but not in CHI patients.

Combined oxidative leaching and electrowinning process for mercury recovery from spent fluorescent lamps.

Science.gov (United States)

Ozgur, Cihan; Coskun, Sezen; Akcil, Ata; Beyhan, Mehmet; Üncü, Ismail Serkan; Civelekoglu, Gokhan

2016-11-01

In this paper, oxidative leaching and electrowinnig processes were performed to recovery of mercury from spent tubular fluorescent lamps. Hypochlorite was found to be effectively used for the leaching of mercury to the solution. Mercury could be leached with an efficiency of 96% using 0.5M/0.2M NaOCl/NaCl reagents at 50°C and pH 7.5 for 2-h. Electrowinning process was conducted on the filtered leaching solutions and over the 81% of mercury was recovered at the graphite electrode using citric acid as a reducing agent. The optimal process conditions were observed as a 6A current intensity, 30g/L of reducing agent concentration, 120min. electrolysis time and pH of 7 at the room temperature. It was found that current intensity and citric acid amount had positive effect for mercury reduction. Recovery of mercury in its elemental form was confirmed by SEM/EDX. Oxidative leaching with NaOCl/NaCl reagent was followed by electrowinning process can be effectively used for the recovery of mercury from spent fluorescent lamps. Copyright © 2016 Elsevier Ltd. All rights reserved.

Flux Recovery of a Forward Osmosis Membrane After a Fouling Process

Science.gov (United States)

Romero-Mangado, Jaione; Parodi, Jurek; Gamboa-Vazquez, Sonia; Stefanson, Ofir; Diaz-Cartagena, Diana C.; Flynn, Michael

2016-01-01

Wastewater treatment through forward osmosis (FO) membranes is a process that has been evaluated in the past years as an innovative technology for the Next Generation Life Support Systems. FO technologies are cost effective, and require very low energy consumption, but are subject to membrane fouling. Membrane fouling occurs when unwanted materials accumulate on the active side of the membrane during the wastewater treatment process, which leads to a decrease in membrane flux rate. The aim of this study is to identify the materials that cause flux rate reduction due to membrane fouling, as well as to evaluate the flux rate recovery after membrane treatment using commercially available antifoulants. Fourier Transform Infrared (FTIR) spectrometry results identified possible compounds that cause membrane fouling and FO testing results demonstrated flux rate recovery after membrane treatment using antifoulants.

Advanced Thermoelectric Materials for Efficient Waste Heat Recovery in Process Industries

Energy Technology Data Exchange (ETDEWEB)

Adam Polcyn; Moe Khaleel

2009-01-06

The overall objective of the project was to integrate advanced thermoelectric materials into a power generation device that could convert waste heat from an industrial process to electricity with an efficiency approaching 20%. Advanced thermoelectric materials were developed with figure-of-merit ZT of 1.5 at 275 degrees C. These materials were not successfully integrated into a power generation device. However, waste heat recovery was demonstrated from an industrial process (the combustion exhaust gas stream of an oxyfuel-fired flat glass melting furnace) using a commercially available (5% efficiency) thermoelectric generator coupled to a heat pipe. It was concluded that significant improvements both in thermoelectric material figure-of-merit and in cost-effective methods for capturing heat would be required to make thermoelectric waste heat recovery viable for widespread industrial application.

Process evaluations for uranium recovery from scrap material

International Nuclear Information System (INIS)

Westphal, B.R.; Benedict, R.W.

1992-01-01

The integral Fast Reactor (IFR) concept being developed by Argonne National Laboratory is based on pyrometallurgical processing of spent nuclear metallic fuel with subsequent fabrication into new reactor fuel by an injection casting sequence. During fabrication, a dilute scrap stream containing uranium alloy fines and broken quartz (Vycor) molds in produced. Waste characterization of this stream, developed by using present operating data and chemical analysis was used to evaluate different uranium recovery methods and possible process variations for the return of the recovered metal. Two methods, comminution with size separation and electrostatic separation, have been tested and can recover over 95% of the metal. Recycling the metal to either the electrochemical process or the injection casting was evaluated for the different economic and process impacts. The physical waste parameters and the important separation process variables are discussed with their effects on the viability of recycling the material. In this paper criteria used to establish the acceptable operating limits is discussed

A high recovery membrane process for purification of low-level radioactive liquid waste

Energy Technology Data Exchange (ETDEWEB)

Al-Samadi, R. [Ontario Power Generation, Pickering, Ontario (Canada); Davloor, R.; Harper, B., E-mail: ram.davloor@brucepower.com [Bruce Power, Tiverton, Ontario (Canada)

2013-07-01

An advanced Active Liquid Waste Treatment System (ALWTS) was designed placed in-service at the Bruce Nuclear Generating Station 'A' in 1999. As part of this unique system an innovative high recovery reverse osmosis system (ROS) was installed to concentrate the contaminants into a small retentate stream that can be processed on-site or sent off-site for disposal. The permeate is discharged to the lake. The overall permeate recovery of the system is greater than 98%. This patented system which saw its first commercial application at the station has now operated continuously for over thirteen years. It has enabled the ALWTS to consistently produce high quality effluent that exceeds environmental discharge limits. This paper discusses the high recovery membrane process its unique design features aimed at minimizing the volume of rejects its separation performance operating history. (author)

A high recovery membrane process for purification of low-level radioactive liquid waste

International Nuclear Information System (INIS)

Al-Samadi, R.; Davloor, R.; Harper, B.

2013-01-01

An advanced Active Liquid Waste Treatment System (ALWTS) was designed placed in-service at the Bruce Nuclear Generating Station 'A' in 1999. As part of this unique system an innovative high recovery reverse osmosis system (ROS) was installed to concentrate the contaminants into a small retentate stream that can be processed on-site or sent off-site for disposal. The permeate is discharged to the lake. The overall permeate recovery of the system is greater than 98%. This patented system which saw its first commercial application at the station has now operated continuously for over thirteen years. It has enabled the ALWTS to consistently produce high quality effluent that exceeds environmental discharge limits. This paper discusses the high recovery membrane process its unique design features aimed at minimizing the volume of rejects its separation performance operating history. (author)

Event-Based Conceptual Modeling

DEFF Research Database (Denmark)

Bækgaard, Lars

2009-01-01

The purpose of the paper is to obtain insight into and provide practical advice for event-based conceptual modeling. We analyze a set of event concepts and use the results to formulate a conceptual event model that is used to identify guidelines for creation of dynamic process models and static...... information models. We characterize events as short-duration processes that have participants, consequences, and properties, and that may be modeled in terms of information structures. The conceptual event model is used to characterize a variety of event concepts and it is used to illustrate how events can...... be used to integrate dynamic modeling of processes and static modeling of information structures. The results are unique in the sense that no other general event concept has been used to unify a similar broad variety of seemingly incompatible event concepts. The general event concept can be used...

[Utility of conceptual schemes and mental maps on the teaching-learning process of residents in pediatrics].

Science.gov (United States)

Cruza, Norberto Sotelo; Fierros, Luis E

2006-01-01

The present study was done at the internal medicine service oft he Hospital lnfantil in the State of Sonora, Mexico. We tried to address the question of the use of conceptual schemes and mind maps and its impact on the teaching-learning-evaluation process among medical residents. Analyze the effects of conceptual schemes, and mind maps as a teaching and evaluation tool and compare them with multiple choice exams among Pediatric residents. Twenty two residents (RI, RII, RIII)on service rotation during six months were assessed initially, followed by a lecture on a medical subject. Conceptual schemes and mind maps were then introduced as a teaching-learning-evaluation instrument. Comprehension impact and comparison with a standard multiple choice evaluation was done. The statistical package (JMP version 5, SAS inst. 2004) was used. We noted that when we used conceptual schemes and mind mapping, learning improvement was noticeable among the three groups of residents (P evaluation tool when compared with multiple choice exams (P < 0.0005). Based on our experience we recommend the use of this educational technique for medical residents in training.

A Conceptual Framework of Corporate and Business Ethics across Organizations: Structures, Processes and Performance

Science.gov (United States)

Svensson, Goran; Wood, Greg

2011-01-01

Purpose: The objective of this paper is to introduce and describe a conceptual framework of corporate and business ethics across organizations in terms of ethical structures, ethical processes and ethical performance. Design/methodology/approach: A framework is outlined and positioned incorporating an ethical frame of reference in the field of…

Conceptualizing movement by expert Bobath instructors in neurological rehabilitation.

Science.gov (United States)

Vaughan-Graham, Julie; Patterson, Kara; Zabjek, Karl; Cott, Cheryl A

2017-12-01

Movement, a core aspect of physiotherapy practice, and integral to the clinical reasoning process has undergone limited theoretical development. Instead, research has focused on intervention effectiveness embedded within the positivist paradigm. The purpose of this study was to explore how expert neurorehabilitation therapists conceptualize movement as part of their clinical reasoning. A qualitative interpretive descriptive approach consisting of stimulated recall using video-recorded treatment sessions and in-depth interviews was used. Theoretical sampling was used to recruit members of the International Bobath Instructors Training Association (IBITA) who are recognized experts in neurorehabilitation. Interview transcripts were transcribed verbatim. Data analysis was progressive, iterative, and inductive. Twenty-two IBITA instructors from 7 different countries volunteered to participate. They ranged in clinical experience from 12 to 40 years and instructor experience from 1 to 35 years. The conceptualization of movement by the IBITA instructors involves the following elements: (1) movement comprises the whole person and the whole body, not just individual body segments; (2) active alignment of body segments is integral to movement performance; and (3) efficient movement requires the relative integration of postural control/stability and selective movement/mobility. The IBITA instructors conceptualize movement from a person-centred perspective. The integration of postural control and selective movement, with alignment and variability as key components, forms the foundation of their understanding of movement. Further investigation into the role of postural control in movement recovery post central nervous system lesion is required. Likewise, the dimensions of movement critical to the conceptualization of movement are not well understood from the perspective of the physiotherapist or persons with neurological impairments. © 2017 John Wiley & Sons, Ltd.

[Recovery: systematic review of a concept].

Science.gov (United States)

Baccari, Ivana Oliveira Preto; Campos, Rosana Teresa Onocko; Stefanello, Sabrina

2015-01-01

The concept of recovery has been described in papers as a state of psychic, physical and social recuperation of day-to-day functions. The scope of this article is to analyze the concepts of the term in different research methodologies and the paradigmatic evolution of the recovery concept. Systematic bibliographical research was conducted in the Pubmed database using the words "recovery + schizophrenia" limited to freely available full papers published in the previous two years. Nineteen papers were analyzed. The majority of the papers sought associations between characteristic data and recovery; few papers discussed the concept in a way to distinguish it from other words like cure or rehabilitation. Recovery as a state in which people with severe mental illness can feel like the creators of their own itinerary tend to be found in qualitative studies and in bibliographic reviews in which the meaning of recovery is not related to the lack of symptoms and tends to prioritize how participative the life of an individual can be despite the disease. Some quantitative studies detect this conceptual difference. In qualitative research there is an increase in the concept of recovery and in ways of promoting it.

Comparative Analysis of Processes for Recovery of Rare Earths from Bauxite Residue

Science.gov (United States)

Borra, Chenna Rao; Blanpain, Bart; Pontikes, Yiannis; Binnemans, Koen; Van Gerven, Tom

2016-11-01

Environmental concerns and lack of space suggest that the management of bauxite residue needs to be re-adressed. The utilization of the residue has thus become a topic high on the agenda for both academia and industry, yet, up to date, it is only rarely used. Nonetheless, recovery of rare earth elements (REEs) with or without other metals from bauxite residue, and utilization of the left-over residue in other applications like building materials may be a viable alternative to storage. Hence, different processes developed by the authors for recovery of REEs and other metals from bauxite residue were compared. In this study, preliminary energy and cost analyses were carried out to assess the feasibility of the processes. These analyses show that the combination of alkali roasting-smelting-quenching-leaching is a promising process for the treatment of bauxite residue and that it is justified to study this process at a pilot scale.

Making Sense of Conceptual Tools in Student-Generated Cases: Student Teachers' Problem-Solving Processes

Science.gov (United States)

Jahreie, Cecilie Flo

2010-01-01

This article examines the way student teachers make sense of conceptual tools when writing cases. In order to understand the problem-solving process, an analysis of the interactions is conducted. The findings show that transforming practical experiences into theoretical reflection is not a straightforward matter. To be able to elaborate on the…

[Recovery of consciousness: process-oriented approach].

Science.gov (United States)

Gusarova, S B

2014-01-01

Traditionally psychological neurorehabilitation of neurosurgical patients is provided subject to availability of clear consciousness and minimal potential to communicate verbally. Cognitive and emotional disorders, problems in social adaptation, neurotic syndromes are normally targets in such cases. We work with patients having survived severe brain damage being in different states of consciousness: vegetative state, minimal state of consciousness, mutism, confusion, posttraumatic Korsaroff syndrom. Psychologist considers recovery of consciousness as the target besides traditional tasks. Construction of communication with patient is central part of such job, where the patient remains unable to contact verbally, yet it is impossible to consider potential aphasia. This is a non-verbal "dialogue" with patient created by psychologist with gradual development and involving other people and objects of environment. Inline with modern neuroscientific achievements demonstrating ability to recognize by patients with severe brain injury (A. Owen, S. Laureys, M. Monti, M. Coleman, A. Soddu, M. Boly and others) we base upon psychological science, on psychotherapeutic approaches containing instruments inevitable to work with patients in altered states of consciousness and creation of non-verbal communication with patient (Jung, Reich, Alexander, Lowen, Keleman, Arnold and Amy Mindell, S. Tomandl, D. Boadella, A. Längle, P. Levin etc). This article will include 15 years of experience to apply Process-oriented approach by A. Mindell to recovery of consciousness of neurosurgical patients based on work with "minimal signals" (micro moves, breath, mimic reactions etc.), principle of feedback, psychosomatic resonance, empathy.

Air injection low temperature oxidation process for enhanced oil recovery from light oil reservoirs

International Nuclear Information System (INIS)

Tunio, A.H.; Harijan, K.

2010-01-01

This paper represents EOR (Enhanced Oil Recovery) methods to recover unswept oil from depleted light oil reservoirs. The essential theme here is the removal of oxygen at LTO (Low Temperature Oxidation) from the injected air for a light oil reservoir by means of some chemical reactions occurring between oil and oxygen. In-situ combustion process, HTO (High Temperature Oxidation) is not suitable for deep light oil reservoirs. In case of light oil reservoirs LTO is more suitable to prevail as comparative to HTO. Few laboratory experimental results were obtained from air injection process, to study the LTO reactions. LTO process is suitable for air injection rate in which reservoir has sufficiently high temperature and spontaneous reaction takes place. Out comes of this study are the effect of LTO reactions in oxygen consumption and the recovery of oil. This air injection method is economic compared to other EOR methods i.e. miscible hydrocarbon gas, nitrogen, and carbon dioxide flooding etc. This LTO air injection process is suitable for secondary recovery methods where water flooding is not feasible due to technical problems. (author)

PROCESS DEVELOPMENT FOR THE RECOVERY OF CRITICAL MATERIALS FROM ELECTRONIC WASTE

Energy Technology Data Exchange (ETDEWEB)

Lister, T. E.; Diaz, L. A.; Clark, G. G.; Keller, P.

2016-09-01

As electronic technology continues to evolve there is a growing need to develop processes which recover valuable material from antiquated technology. This need follows from the environmental challenges associated with the availability of raw materials and fast growing generation of electronic waste. Although just present in small quantities in electronic devices, the availability of raw materials, such as rare earths and precious metals, becomes critical for the production of high tech electronic devices and the development of green technologies (i.e. wind turbines, electric motors, and solar panels). Therefore, the proper recycling and processing of increasing volumes of electronic waste present an opportunity to stabilize the market of critical materials, reducing the demand of mined products, and providing a proper disposal and treatment of a hazardous waste stream. This paper will describe development and techno-economic assessment of a comprehensive process for the recovery of value and critical materials from electronic waste. This hydrometallurgical scheme aims to selectively recover different value segments in the materials streams (base metals, precious metals, and rare earths). The economic feasibility for the recovery of rare earths from electronic waste is mostly driven by the efficient recovery of precious metals, such as Au and Pd (ca. 80 % of the total recoverable value). Rare earth elements contained in magnets (speakers, vibrators and hard disk storage) can be recovered as a mixture of rare earths oxides which can later be reduced to the production of new magnets.

Efficient ethanol recovery from fermentation broths with integrated distillation-membrane process

Science.gov (United States)

The energy demand of distillation-molecular sieve systems for ethanol recovery/dehydration can be significant, particularly for dilute solutions. An alternative process integrating vapor stripping (like a beer still) with vapor compression and a vapor permeation membrane separati...

Current Conceptual Challenges in the Study of Rhythm Processing Deficits

Directory of Open Access Journals (Sweden)

Pauline eTranchant

2015-06-01

Full Text Available Interest in the study of rhythm processing deficits (RPD is currently growing in the cognitive neuroscience community, as this type of investigation constitutes a powerful tool for the understanding of normal rhythm processing. Because this field is in its infancy, it still lacks a common conceptual vocabulary to facilitate effective communication between different researchers and research groups. In this commentary, we provide a brief review of recent reports of RPD through the lens of one important empirical issue: the method by which beat perception is measured, and the consequences of method selection for the researcher’s ability to specify which mechanisms are impaired in RPD. This critical reading advocates for the importance of matching measurement tools to the putative neurocognitive mechanisms under study, and reveals the need for effective and specific assessments of the different aspects of rhythm perception and synchronization.

Phosphorus recovery from sewage sludge by an electrokinetic process

DEFF Research Database (Denmark)

Ribeiro, A.B.; Couto, N.; Mateus, E.P.

to supply P for the next ca. 80 years. Additionaly, the quality of this raw material has deteriorated due to contamination, which has increased processing costs of mineral P fertilizers. The recovery of nutrients, like P, from secondary resources urges. Sewage sludge (SS) and sewage sludge ash (SSA) from...... waste water treatment plants (WWTP) may contain contaminants or unwanted elements regarding specific applications, but they also contain secondary resources of high value. Using these ash as a P resource, while removing the contaminants, seems a sustainable option. The electrokinetic (EK) process can....... This communication aims to discuss preliminary results of the feasibility of EK process to recover P from WWTP target wastes....

Former patients' experiences of recovery from self-harm as an individual, prolonged learning process: a phenomenological hermeneutical study.

Science.gov (United States)

Tofthagen, Randi; Talseth, Anne Grethe; Fagerstrøm, Lisbeth Maria

2017-10-01

To explore, describe and understand former patients' experiences of recovery from self-harm. Previous research shows that a person's development towards a more secure self-image, mastery of their emotions, an understanding of what triggers self-harm and mastery of new ways to cope with problems are central to recovery. Recovery from self-harm is still a relatively new field of research. A phenomenological hermeneutical approach. Eight participants were interviewed in 2013. Inclusion criteria were as follows: to have committed no self-harm during the past 2 years, to have experienced recovery and to be 18 or older. We analysed data using a phenomenological hermeneutical method. The findings resulted in three themes with subthemes. The first theme, the turning point, occurred at the start of the recovery process. Participants learned to choose life, verbally express their inner pain and reconcile with their life histories. In the second theme, coping with everyday life, participants learned how to choose alternative actions instead of self-harm and attend to their basic, physical needs. In the third theme, valuing close relationships and relationships with mental health nurses, participants learned to receive support from close relationships with others and mental health nurses. A tentative model illustrates the comprehensive understanding of the recovery process, described as an individual, prolonged learning process. To achieve recovery, persons who self-harm need guidance and knowledge of how to realize a personal learning process. More research is needed on how mental health nurses can support individual transition processes and thereby facilitate recovery. © 2017 John Wiley & Sons Ltd.

Measures for waste water management from recovery processing of Zhushanxia uranium deposit

International Nuclear Information System (INIS)

Liu Yaochi; Xu Lechang

2000-01-01

Measures for waste water management from recovery processing of Zhushanxia uranium deposit of Wengyuan Mine is analyzed, which include improving process flow, recycling process water used in uranium mill as much as possible and choosing a suitable disposing system. All these can decrease the amount of waste water, and also reduce costs of disposing waste water and harm to environment

Recovery Processes During and After Work: Associations With Health, Work Engagement, and Job Performance.

Science.gov (United States)

de Bloom, Jessica; Kinnunen, Ulla; Korpela, Kalevi

2015-07-01

We examined energy management during work, recovery experiences after work and their connections to health, work engagement, and job performance. An online survey was completed by 1208 Finnish employees. Energy management was assessed through 13 strategies and recovery experiences through four experiences. As outcomes of recovery, we examined self-reported health, work engagement, and job performance. On average, employees applied three energy management strategies. The most beneficial strategies were work-related: shifting focus, goal setting, and helping coworkers. Both energy management and recovery experiences contributed to the outcomes. Employees benefit in terms of energy from shifting their focus to positive aspects of their jobs and demonstrating proactive social behavior at work. Recovery processes during and after work are closely connected to each other, to well-being and performance at work.

Processing of Phosphorus Slag with Recovery of Rare Earth Metals and Obtaining Silicon Containing Cake

Science.gov (United States)

Karshigina, Zaure; Abisheva, Zinesh; Bochevskaya, Yelena; Akcil, Ata; Sharipova, Aynash; Sargelova, Elmira

2016-10-01

The present research is devoted to the processing of slag generating during the yellow phosphorus production. In this paper are presented studies on leaching of phosphorus production slag by nitric acid with recovery of rare earth metals (REMs) into solution. REMs recovery into the solution achieved 98 % during the leaching process with using 7.5 mol/L of HNO3, liquid-to-solid ratio is 2.6:1, temperature is 60°C, process duration is 1 hour and stirrer speed is 500 rpm. Behaviour during the leaching of associated components such as calcium, aluminium, and iron was studied. After the leaching cake contains ∼⃒75-85 % of SiO2 and it might be useful for obtaining of precipitated silicon dioxide. With the purpose of separation from the impurities, recovery and concentrating of REMs, the obtained solution after leaching was subjected to extraction processing methods. The influence of ratio of organic and aqueous phases (O: A) on the extraction of rare earth metals by tributyl phosphate (TBP) with concentrations from 20 up to 100 % was studied. The REMs extraction with increasing TBP concentration under changes O:A ratio from 1:20 down to 1:1 into the organic phase from the solutions after nitric acid leaching increased from 22.2 up to 99.3%. The duration effect of REMs extraction process was studied by tributyl phosphate. It is revealed that with increasing of duration of the extraction process from 10 to 30 minutes REMs recovery into the organic phase almost did not changed. The behaviour of iron in the extraction process by TBP was studied. It was found that such accompanying components as calcium and aluminium by tributyl phosphate didn't extracted. To construct isotherm of REMs extraction of by tributyl phosphate was used variable volume method. It was calculated three-step extraction is needed for REMs recovery from the solutions after nitric acid leaching of phosphorus production slag. The process of the three-steps counter current extraction of rare earth

Post-event Processing Predicts Impaired Cortisol Recovery Following Social Stressor: The Moderating Role of Social Anxiety.

Science.gov (United States)

Maeda, Shunta; Sato, Tomoya; Shimada, Hironori; Tsumura, Hideki

2017-01-01

There is growing evidence that individuals with social anxiety show impaired cortisol recovery after experiencing social evaluative stressors. Yet, little is known regarding the cognitive processes underlying such impaired cortisol recovery. The present study examined the effect of post-event processing (PEP), referred to as repetitive thinking about social situations, on cortisol recovery following a social stressor. Forty-two non-clinical university students (23 women, 19 men, mean age = 22.0 ± 2.0 years) completed the Trier Social Stress Test (TSST), followed by a thought sampling procedure which assessed the frequency of PEP reflecting the TSST. A growth curve model showed PEP and social anxiety interactively predicted cortisol recovery. In particular, PEP predicted impaired cortisol recovery in those with low levels of social anxiety but not in those with high levels of social anxiety, which contradicted the initial hypothesis. These findings suggest that PEP is differentially associated with cortisol recovery depending on levels of social anxiety. The possible mechanisms underlying these findings were discussed in terms of protective inhibition framework.

Recovery from schizophrenia and the recovery model.

Science.gov (United States)

Warner, Richard

2009-07-01

The recovery model refers to subjective experiences of optimism, empowerment and interpersonal support, and to a focus on collaborative treatment approaches, finding productive roles for user/consumers, peer support and reducing stigma. The model is influencing service development around the world. This review will assess whether optimism about outcome from serious mental illness and other tenets of the recovery model are borne out by recent research. Remission of symptoms has been precisely defined, but the definition of 'recovery' is a more diffuse concept that includes such factors as being productive and functioning independently. Recent research and a large, earlier body of data suggest that optimism about outcome from schizophrenia is justified. A substantial proportion of people with the illness will recover completely and many more will regain good social functioning. Outcome is better for people in the developing world. Mortality for people with schizophrenia is increasing but is lower in the developing world. Working appears to help people recover from schizophrenia, and recent advances in vocational rehabilitation have been shown to be effective in countries with differing economies and labor markets. A growing body of research supports the concept that empowerment is an important component of the recovery process. Key tenets of the recovery model - optimism about recovery from schizophrenia, the importance of access to employment and the value of empowerment of user/consumers in the recovery process - are supported by the scientific research. Attempts to reduce the internalized stigma of mental illness should enhance the recovery process.

Process integration in bioprocess indystry: waste heat recovery in yeast and ethyl alcohol plant

International Nuclear Information System (INIS)

Raskovic, P.; Anastasovski, A.; Markovska, Lj.; Mesko, V.

2010-01-01

The process integration of the bioprocess plant for production of yeast and alcohol was studied. Preliminary energy audit of the plant identified the huge amount of thermal losses, caused by waste heat in exhausted process streams, and reviled the great potential for energy efficiency improvement by heat recovery system. Research roadmap, based on process integration approach, is divided on six phases, and the primary tool used for the design of heat recovery network was Pinch Analysis. Performance of preliminary design are obtained by targeting procedure, for three process stream sets, and evaluated by the economic criteria. The results of process integration study are presented in the form of heat exchanger networks which fulfilled the utilization of waste heat and enable considerable savings of energy in short payback period.

Clean recovery of antioxidant compounds from plant foods, by-products and algae assisted by ultrasounds processing. Modeling approaches to optimize processing conditions

DEFF Research Database (Denmark)

Roselló-Soto, Elena; Galanakis, Charis M.; Brnčić, Mladen

2015-01-01

Ultrasound treatment is an alternative affordable, effective and reproducible method for the improved recovery of bioactive compounds from various processing streams. The objective of this review is to discuss the impact of ultrasound-assisted extraction on the recovery of polyphenols, carotenoid...

Yttrium recovery from primary and secondary sources: A review of main hydrometallurgical processes

Energy Technology Data Exchange (ETDEWEB)

Innocenzi, Valentina, E-mail: valentina.innocenzi1@univaq.it [Department of Industrial Engineering, of Information and Economy, University of L’Aquila, Via Giovanni Gronchi 18, Zona industriale di Pile, 67100 L’Aquila (Italy); De Michelis, Ida [Department of Industrial Engineering, of Information and Economy, University of L’Aquila, Via Giovanni Gronchi 18, Zona industriale di Pile, 67100 L’Aquila (Italy); Kopacek, Bernd [SAT, Austrian Society for Systems Engineering and Automation, Gurkasse 43/2, A-1140 Vienna (Austria); Vegliò, Francesco [Department of Industrial Engineering, of Information and Economy, University of L’Aquila, Via Giovanni Gronchi 18, Zona industriale di Pile, 67100 L’Aquila (Italy)

2014-07-15

Highlights: • Review of the main hydrometallurgical processes to recover yttrium. • Recovery of yttrium from primary sources. • Recovery of yttrium from e-waste and other types of waste. - Abstract: Yttrium is important rare earths (REs) used in numerous fields, mainly in the phosphor powders for low-energy lighting. The uses of these elements, especially for high-tech products are increased in recent years and combined with the scarcity of the resources and the environmental impact of the technologies to extract them from ores make the recycling waste, that contain Y and other RE, a priority. The present review summarized the main hydrometallurgical technologies to extract Y from ores, contaminated solutions, WEEE and generic wastes. Before to discuss the works about the treatment of wastes, the processes to retrieval Y from ores are discussed, since the processes are similar and derived from those already developed for the extraction from primary sources. Particular attention was given to the recovery of Y from WEEE because the recycle of them is important not only for economical point of view, considering its value, but also for environmental impact that this could be generated if not properly disposal.

Virtual experiments: a new approach for improving process conceptualization in hillslope hydrology

Science.gov (United States)

Weiler, Markus; McDonnell, Jeff

2004-01-01

We present an approach for process conceptualization in hillslope hydrology. We develop and implement a series of virtual experiments, whereby the interaction between water flow pathways, source and mixing at the hillslope scale is examined within a virtual experiment framework. We define these virtual experiments as 'numerical experiments with a model driven by collective field intelligence'. The virtual experiments explore the first-order controls in hillslope hydrology, where the experimentalist and modeler work together to cooperatively develop and analyze the results. Our hillslope model for the virtual experiments (HillVi) in this paper is based on conceptualizing the water balance within the saturated and unsaturated zone in relation to soil physical properties in a spatially explicit manner at the hillslope scale. We argue that a virtual experiment model needs to be able to capture all major controls on subsurface flow processes that the experimentalist might deem important, while at the same time being simple with few 'tunable parameters'. This combination makes the approach, and the dialog between experimentalist and modeler, a useful hypothesis testing tool. HillVi simulates mass flux for different initial conditions under the same flow conditions. We analyze our results in terms of an artificial line source and isotopic hydrograph separation of water and subsurface flow. Our results for this first set of virtual experiments showed how drainable porosity and soil depth variability exert a first order control on flow and transport at the hillslope scale. We found that high drainable porosity soils resulted in a restricted water table rise, resulting in more pronounced channeling of lateral subsurface flow along the soil-bedrock interface. This in turn resulted in a more anastomosing network of tracer movement across the slope. The virtual isotope hydrograph separation showed higher proportions of event water with increasing drainable porosity. When

Progress in the development of the reverse osmosis process for spacecraft wash water recovery.

Science.gov (United States)

Pecoraro, J. N.; Podall, H. E.; Spurlock, J. M.

1972-01-01

Research work on ambient- and pasteurization-temperature reverse osmosis processes for wash water recovery in a spacecraft environment is reviewed, and the advantages and drawbacks of each are noted. A key requirement in each case is to provide a membrane of appropriate stability and semipermeability. Reverse osmosis systems intended for such use must also take into account the specific limitations and requirements imposed by the small volume of water to be processed and the high water recovery desired. The incorporation of advanced high-temperature membranes into specially designed modules is discussed.

Conceptual design for the Waste Receiving And Processing facility Module 2A

International Nuclear Information System (INIS)

1992-07-01

This Conceptual Design Report (CDR) for the Waste Receiving and Processing (WRAP) Module 2A facility. The mission of the WRAP Module 2A facility is to receive, process, package, certify, and ship for permanent burial at the Hanford site disposal facilities those contact handled (CH) low-level radioactive mixed wastes (LLMW) that: (1) are currently in retrievable storage at the Hanford Central Waste Complex (HCWC) awaiting a treatment capability to permit permanent disposal compliant with the Land Disposal Restrictions and; (2) are forecasted to be generated over the next 30 years. This volume provides the detailed cost estimate for the WRAP 2A facility. Included in this volume is the project construction schedule

The lived experience of art making as a companion to the mental health recovery process.

Science.gov (United States)

Van Lith, Theresa; Fenner, Patricia; Schofield, Margot

2011-01-01

Art making is a common activity provided for consumers in mental health psychosocial rehabilitation services, yet there is little evidence available which examines its role in the recovery process. The current study inquires into mental health consumers' lived experiences of art making within psychosocial rehabilitation services and their views on how art making supports mental health recovery. This research used qualitative in-depth interviews to explore the role of art making in the mental health recovery journey. The sample comprised 18 consumer participants who attended art-based programs in two psychosocial services in Victoria, Australia. The 60-90 min interviews were analysed using interpretative phenomenological analysis. A total of 11 major themes were identified and organised into three areas: qualities conducive to the art making context, how the art making process benefits mental health recovery, and how the image or art product benefits mental health recovery. The 11 themes are described and illustrated from participant interviews. Consumers described art making as a transformative activity which enabled them to take greater control of their lives, resulting in feeling stronger, more confident, and more capable of driving their journey of recovery. The art product also served valuable roles in supporting their recovery. Art making is a highly valued activity by consumers, who suggest that innovative and strengths-based methods, such as art making, can facilitate recovery and self-expression. A key challenge for the field is to determine how such methods can be better integrated into mental health service delivery.

The magnet designation process: a qualitative approach using Donabedian's conceptual framework.

Science.gov (United States)

Upenieks, Valda V; Abelew, Sheryl

2006-01-01

Twelve nurse leaders and 12 registered nurses from 2 hospitals were interviewed to gain an understanding on the process for preparing for magnet designation. These leaders and nurses provided insight into whether a cultural shift within the organization was occurring while striving for magnet designation and the level of staff nurses' engagement during the process. Donabedian's framework provided the conceptual context for this study. According to Donabedian, stable organizational structures will influence professional nursing processes and result in better outcomes as measured by magnet status. The authors discuss how a magnet culture is achieved when structural factors such as adequate staffing and pay are present before building the processes, as well as the ways certain ingredients such as professional governance councils need to be primed to achieve the desired magnet outcome. However, transforming the culture into a "valued-practice" magnet organization entails a paradigm shift marked by the willingness to share information and the depth and breadth of commitment toward staff engagement in fulfilling the mission of a culture that truly values nursing expertise.

Optical processes in the performance and recovery of gas-phase switches

International Nuclear Information System (INIS)

Gundersen, M.

1982-01-01

In this paper several optical processes that may be used to affect gas-phase switch performance and operation are discussed, and approaches using a laser to increase recovery rates of switches are presented. In the latter the laser is used during the recovery phase rather than the conductive or closure phase. This papper suggests that it should be possible to use a low-power laser (e.g., one that is technologically feasible to use as part of a switch) to assist in opening the switch by quenching excited atomic and/or molecular species. The application of laser-induced energy extraction to gas-phase switches is also discussed

Complex service recovery processes: how to avoid triple deviation

OpenAIRE

Edvardsson, Bo; Tronvoll, Bård; Höykinpuro, Ritva

2011-01-01

Purpose – This article seeks to develop a new framework to outline factors that influence the resolution of unfavourable service experiences as a result of double deviation. The focus is on understanding and managing complex service recovery processes. Design/methodology/approach – An inductive, explorative and narrative approach was selected. Data were collected in the form of narratives from the field through interviews with actors at various levels in organisations as well as with custo...

Status of pre-processing of waste electrical and electronic equipment in Germany and its influence on the recovery of gold.

Science.gov (United States)

Chancerel, Perrine; Bolland, Til; Rotter, Vera Susanne

2011-03-01

Waste electrical and electronic equipment (WEEE) contains gold in low but from an environmental and economic point of view relevant concentration. After collection, WEEE is pre-processed in order to generate appropriate material fractions that are sent to the subsequent end-processing stages (recovery, reuse or disposal). The goal of this research is to quantify the overall recovery rates of pre-processing technologies used in Germany for the reference year 2007. To achieve this goal, facilities operating in Germany were listed and classified according to the technology they apply. Information on their processing capacity was gathered by evaluating statistical databases. Based on a literature review of experimental results for gold recovery rates of different pre-processing technologies, the German overall recovery rate of gold at the pre-processing level was quantified depending on the characteristics of the treated WEEE. The results reveal that - depending on the equipment groups - pre-processing recovery rates of gold of 29 to 61% are achieved in Germany. Some practical recommendations to reduce the losses during pre-processing could be formulated. Defining mass-based recovery targets in the legislation does not set incentives to recover trace elements. Instead, the priorities for recycling could be defined based on other parameters like the environmental impacts of the materials. The implementation of measures to reduce the gold losses would also improve the recovery of several other non-ferrous metals like tin, nickel, and palladium.

Recovery in soccer : part ii-recovery strategies.

Science.gov (United States)

Nédélec, Mathieu; McCall, Alan; Carling, Chris; Legall, Franck; Berthoin, Serge; Dupont, Gregory

2013-01-01

In the formerly published part I of this two-part review, we examined fatigue after soccer matchplay and recovery kinetics of physical performance, and cognitive, subjective and biological markers. To reduce the magnitude of fatigue and to accelerate the time to fully recover after completion, several recovery strategies are now used in professional soccer teams. During congested fixture schedules, recovery strategies are highly required to alleviate post-match fatigue, and then to regain performance faster and reduce the risk of injury. Fatigue following competition is multifactorial and mainly related to dehydration, glycogen depletion, muscle damage and mental fatigue. Recovery strategies should consequently be targeted against the major causes of fatigue. Strategies reviewed in part II of this article were nutritional intake, cold water immersion, sleeping, active recovery, stretching, compression garments, massage and electrical stimulation. Some strategies such as hydration, diet and sleep are effective in their ability to counteract the fatigue mechanisms. Providing milk drinks to players at the end of competition and a meal containing high-glycaemic index carbohydrate and protein within the hour following the match are effective in replenishing substrate stores and optimizing muscle-damage repair. Sleep is an essential part of recovery management. Sleep disturbance after a match is common and can negatively impact on the recovery process. Cold water immersion is effective during acute periods of match congestion in order to regain performance levels faster and repress the acute inflammatory process. Scientific evidence for other strategies reviewed in their ability to accelerate the return to the initial level of performance is still lacking. These include active recovery, stretching, compression garments, massage and electrical stimulation. While this does not mean that these strategies do not aid the recovery process, the protocols implemented up until

A business process for enhanced heavy oil recovery research and development

International Nuclear Information System (INIS)

Carlson, P.; Campbell, M.; Kantzas, A.

1995-01-01

Husky Oil's enhanced oil recovery (EOR) research management processes for reducing process development time and increasing investment efficiency were described. The considerations that went into the development of the plan a decade ago were reviewed and new ideas incorporated into the revised plan were presented. Four case studies were presented to illustrate the need for process to reservoir matching. A need for strategic research planning was emphasized. Proposed technologies for enhancement of heavy oil reservoir productivity were presented in tabular form. 1 tab., 7 figs

Quantification of biomolecules in herring (Clupea harengus) industry processing waters and their recovery using electroflocculation and ultrafiltration

DEFF Research Database (Denmark)

Osman, Ali; Gringer, Nina; Svendsen, Tore

2015-01-01

Four types of herring industry processing waters; refrigerated sea water (RSW), storage water (SW), processing water from cutting (PW) and pre-salting brines (SB) were subjected to chemical characterization and biomolecule recovery using electroflocculation (EF) and ultrafiltration (UF). The high......Four types of herring industry processing waters; refrigerated sea water (RSW), storage water (SW), processing water from cutting (PW) and pre-salting brines (SB) were subjected to chemical characterization and biomolecule recovery using electroflocculation (EF) and ultrafiltration (UF...

ThermoEnergy Ammonia Recovery Process for Municipal and Agricultural Wastes

Directory of Open Access Journals (Sweden)

Alex G. Fassbender

2001-01-01

Full Text Available The Ammonia Recovery Process (ARP is an award-winning, low-cost, environmentally responsible method of recovering nitrogen, in the form of ammonia, from various dilute waste streams and converting it into concentrated ammonium sulfate. The ThermoEnergy Biogas System utilizes the new chemisorption-based ARP to recover ammonia from anaerobically digested wastes. The process provides for optimal biogas production and significantly reduced nitrogen levels in the treated water discharge. Process flows for the ammonia recovery and ThermoEnergy biogas processes are presented and discussed. A comparison with other techniques such as biological nitrogen removal is made. The ARP technology uses reversible chemisorption and double salt crystal precipitation to recover and concentrate the ammonia. The ARP technology was successfully proven in a recent large-scale field demonstration at New York City’s Oakwood Beach Wastewater Treatment Plant, located on Staten Island. This project was a joint effort with Foster Wheeler Environmental Corporation, the Civil Engineering Research Foundation, and New York City Department of Environmental Protection. Independent validated plant data show that ARP consistently recovers up to 99.9% of the ammonia from the city’s centrate waste stream (derived from dewatering of sewage sludge, as ammonium sulfate. ARP technology can reduce the nitrogen (ammonia discharged daily into local bodies of water by municipalities, concentrated animal farming operations, and industry. Recent advances to ARP enhance its performance and economic competitiveness in comparison to stripping or ammonia destruction technologies.

Chattanooga shale: uranium recovery by in situ processing

International Nuclear Information System (INIS)

Jackson, D.D.

1977-01-01

The increasing demand for uranium as reactor fuel requires the addition of sizable new domestic reserves. One of the largest potential sources of low-grade uranium ore is the Chattanooga shale--a formation in Tennessee and neighboring states that has not been mined conventionally because it is expensive and environmentally disadvantageous to do so. An in situ process, on the other hand, might be used to extract uranium from this formation without the attendant problems of conventional mining. We have suggested developing such a process, in which fracturing, retorting, and pressure leaching might be used to extract the uranium. The potential advantages of such a process are that capital investment would be reduced, handling and disposing of the ore would be avoided, and leaching reagents would be self-generated from air and water. If successful, the cost reductions from these factors could make the uranium produced competitive with that from other sources, and substantially increase domestic reserves. A technical program to evaluate the processing problems has been outlined and a conceptual model of the extraction process has been developed. Preliminary cost estimates have been made, although it is recognized that their validity depends on how successfully the various processing steps are carried out. In view of the preliminary nature of this survey (and our growing need for uranium), we have urged a more detailed study on the feasibility of in situ methods for extracting uranium from the Chattanooga shale

The family living the child recovery process after hospital discharge.

Science.gov (United States)

Pinto, Júlia Peres; Mandetta, Myriam Aparecida; Ribeiro, Circéa Amalia

2015-01-01

to understand the meaning attributed by the family to its experience in the recovery process of a child affected by an acute disease after discharge, and to develop a theoretical model of this experience. Symbolic interactionism was adopted as a theoretical reference, and grounded theory was adopted as a methodological reference. data were collected through interviews and participant observation with 11 families, totaling 15 interviews. A theoretical model consisting of two interactive phenomena was formulated from the analysis: Mobilizing to restore functional balance and Suffering from the possibility of a child's readmission. the family remains alert to identify early changes in the child's health, in an attempt to avoid rehospitalization. the effects of the disease and hospitalization continue to manifest in family functioning, causing suffering even after the child's discharge and recovery.

Recovery of Tungsten and Molybdenum from Low-Grade Scheelite

Science.gov (United States)

Li, Yongli; Yang, Jinhong; Zhao, Zhongwei

2017-10-01

With most high-quality tungsten ores being exhausted, the enhancement of low-grade scheelite concentrates processing has attracted a great deal of attention. The objective of this study is to develop a method to maximize the recovery tungsten and molybdenum from a low-grade scheelite via a new acid leaching process followed by solvent extraction. Under optimal conditions (350 g/L H2SO4, 95°C, and 2 h), approximately 99.8% of tungsten and 98% of molybdenum were leached out. In the subsequent solvent extraction process, more than 99% of the tungsten and molybdenum were extracted with a co-extraction system (50% TBP, 30% HDEHP, and 10% 2-octanol in kerosene) using a three-stage cross-flow extraction. The raffinate can be recycled for the next leaching process after replenishing the H2SO4 to the initial value (approximately 350 g/L). Based on these results, a conceptual flowsheet is presented to recover tungsten and molybdenum from the low-grade scheelite.

PROFESSIONAL SPECIFICITY OF CONCEPTUAL THINKING

Directory of Open Access Journals (Sweden)

S. A. Gilmanov

2017-01-01

Full Text Available Introduction. Most studies of psychologists and teachers in the phenomenon of conceptual thinking and ways of its formation are considered to be rather controversial and questionable. However, the research results were limited to the phenomenon of conceptual thinking and are therefore not representative for its implementation during the process of vocational training at the higher school. There is still considerable uncertainty with regard to the approaches to the problem of conceptual thinking in the humanities, including pedagogics and psychology. Furthermore, previous studies have not dealt with the objectives of conceptual thinking formation.The aims of the article are: to justify the use of the term “professional conceptualization of thinking” (PCT in theory and practice; to describe the prospects of the development of PCT in the training process.Methodology and research methods. The methodological base of the research involves the Russian psychological and pedagogical science approaches to the consideration of conceptual thinking as a higher mental function, a systematized and summarized form of cognitive reflection of notions and relations of reality. The experimental work was carried out using the method of observation, interviews, and tests. Quantitative and qualitative analysis of the data was conducted. The process of formation of PCT is described through the theory of stage-by-stage systematic development of mental acts.Results and scientific novelty. The concept “professional conceptualization of thinking” (PCT, a new one for psychological-pedagogical science, is suggested. The PCT levels are identified: ordinary, formal, substantial, system, and holistic. The objectives proposed for the development of the PCT levels in the process of professional education consist in the organization of consecutive transition from conscious mastering of a terminological framework to its use in the performance of educational tasks; from

Developing Conceptual Understanding and Procedural Skill in Mathematics: An Iterative Process.

Science.gov (United States)

Rittle-Johnson, Bethany; Siegler, Robert S.; Alibali, Martha Wagner

2001-01-01

Proposes that conceptual and procedural knowledge develop in an iterative fashion and improved problem representation is one mechanism underlying the relations between them. Two experiments were conducted with 5th and 6th grade students learning about decimal fractions. Results indicate conceptual and procedural knowledge do develop, iteratively,…

Efficient ethanol recovery from yeast fermentation broth with integrated distillation-membrane process

Science.gov (United States)

A hybrid process integrating vapor stripping with vapor compression and vapor permeation membrane separation, termed Membrane Assisted Vapor Stripping (MAVS), was evaluated for recovery and dehydration of ethanol from aqueous solution as an alternative to conventional distillatio...

Advanced on-site conceptual simulator for Forsmark 3

International Nuclear Information System (INIS)

Johansson, G.; Sjoestrand, K.

1984-01-01

On-site conceptual simulators have been extensively used at Swedish nuclear power plants. Despite having access to identical replica simulators, both the Swedish State Power Board and the Swedish private power industry have ordered conceptual simulators during 1982. The motivation has been that a complete training programme requires access to both a replica and a conceptual simulator. The replica simulator is perfect for training in control room behaviour but less appropriate for ensuring deeper process understanding. On the other hand, the conceptual simulator is not well suited for getting the personnel acquainted with the control room but is perfect for extending their knowledge of the plant processes. In order to give a realistic description of these processes, the conceptual simulator model must be fairly advanced. The Forsmark 3 conceptual simulator simulates the entire primary system, including the details of the steam and feedwater systems. Considerable attention has also been devoted to the presentation of calculated variables. For example, all the variables in the data base (approx. 6600) can be presented on colour-graphic CRTs as functions of time. (author)

Conceptualization of Approaches and Thought Processes Emerging in Validating of Model in Mathematical Modeling in Technology Aided Environment

Science.gov (United States)

Hidiroglu, Çaglar Naci; Bukova Güzel, Esra

2013-01-01

The aim of the present study is to conceptualize the approaches displayed for validation of model and thought processes provided in mathematical modeling process performed in technology-aided learning environment. The participants of this grounded theory study were nineteen secondary school mathematics student teachers. The data gathered from the…

Experimental investigation of molten salt droplet quenching and solidification processes of heat recovery in thermochemical hydrogen production

International Nuclear Information System (INIS)

Ghandehariun, S.; Wang, Z.; Naterer, G.F.; Rosen, M.A.

2015-01-01

Highlights: • Thermal efficiency of a thermochemical cycle of hydrogen production is improved. • Direct contact heat recovery from molten salt is analyzed. • Falling droplets quenched into water are investigated experimentally. - Abstract: This paper investigates the heat transfer and X-ray diffraction patterns of solidified molten salt droplets in heat recovery processes of a thermochemical Cu–Cl cycle of hydrogen production. It is essential to recover the heat of the molten salt to enhance the overall thermal efficiency of the copper–chlorine cycle. A major portion of heat recovery within the cycle can be achieved by cooling and solidifying the molten salt exiting an oxygen reactor. Heat recovery from the molten salt is achieved by dispersing the molten stream into droplets. In this paper, an analytical study and experimental investigation of the thermal phenomena of a falling droplet quenched into water is presented, involving the droplet surface temperature during descent and resulting composition change in the quench process. The results show that it is feasible to quench the molten salt droplets for an efficient heat recovery process without introducing any material imbalance for the overall cycle integration.

A Systematic Approach for Conceptual and Sustainable Process Design: Production of Methylamines From Methanol and Ammonia

DEFF Research Database (Denmark)

Mansouri, Seyed Soheil; Ismail, Muhammad Imran Bin; Almoor, Karim

2012-01-01

and environmentally acceptable plant for producing mono-methylamines, di-methylamines and tri-methylamines from methanol and ammonia. The systematic method divides the process design work into 12 sequential tasks that covers all stages of conceptual design, starting from the consideration of qualitative aspects...... of the process flow sheet and preliminary calculations to the detailed process simulations, equipment sizing, costing, an economic evaluation, and sustainability of the designed process. At the end of task-9, the base case design is obtained, which is then further refined and improved with respect to heat...

To master or perform? Exploring relations between achievement goals and conceptual change learning.

Science.gov (United States)

Ranellucci, John; Muis, Krista R; Duffy, Melissa; Wang, Xihui; Sampasivam, Lavanya; Franco, Gina M

2013-09-01

Research is needed to explore conceptual change in relation to achievement goal orientations and depth of processing. To address this need, we examined relations between achievement goals, use of deep versus shallow processing strategies, and conceptual change learning using a think-aloud protocol. Seventy-three undergraduate students were assessed on their prior knowledge and misconceptions about Newtonian mechanics, and then reported their achievement goals and participated in think-aloud protocols while reading Newtonian physics texts. A mastery-approach goal orientation positively predicted deep processing strategies, shallow processing strategies, and conceptual change. In contrast, a performance-approach goal orientation did not predict either of the processing strategies, but negatively predicted conceptual change. A performance-avoidance goal orientation negatively predicted deep processing strategies and conceptual change. Moreover, deep and shallow processing strategies positively predicted conceptual change as well as recall. Finally, both deep and shallow processing strategies mediated relations between mastery-approach goals and conceptual change. Results provide some support for Dole and Sinatra's (1998) Cognitive Reconstruction of Knowledge Model of conceptual change but also challenge specific facets with regard to the role of depth of processing in conceptual change. © 2012 The British Psychological Society.

Effects of introducing energy recovery processes to the municipal solid waste management system in Ulaanbaatar, Mongolia.

Science.gov (United States)

Toshiki, Kosuke; Giang, Pham Quy; Serrona, Kevin Roy B; Sekikawa, Takahiro; Yu, Jeoung-soo; Choijil, Baasandash; Kunikane, Shoichi

2015-02-01

Currently, most developing countries have not set up municipal solid waste management systems with a view of recovering energy from waste or reducing greenhouse gas emissions. In this article, we have studied the possible effects of introducing three energy recovery processes either as a single or combination approach, refuse derived fuel production, incineration and waste power generation, and methane gas recovery from landfill and power generation in Ulaanbaatar, Mongolia, as a case study. We concluded that incineration process is the most suitable as first introduction of energy recovery. To operate it efficiently, 3Rs strategies need to be promoted. And then, RDF production which is made of waste papers and plastics in high level of sorting may be considered as the second step of energy recovery. However, safety control and marketability of RDF will be required at that moment. Copyright © 2014. Published by Elsevier B.V.

Conceptual design for remote handling methods using the HIP process in the Calcine Immobilization Program

International Nuclear Information System (INIS)

Berry, S.M.; Cox, C.G.; Hoover, M.A.

1994-03-01

This report recommends the remote conceptual design philosophy for calcine immobilization using the hot isostatic press (HIP) process. Areas of remote handling operations discussed in this report include: (1) introducing the process can into the front end of the HIP process, (2) filling and compacting the calcine/frit mixture into the process can, (3) evacuating and sealing the process can, (4) non-destructive testing of the seal on the process can, (5) decontamination of the process can, (6) HIP furnace loading and unloading the process can for the HIPing operation, (7) loading an overpack canister with processed HIP cans, (8) sealing the canister, with associated non-destructive examination (NDE) and decontamination, and (9) handling canisters for interim storage at the Idaho Chemical Processing Plant (ICPP) located on the Idaho National Engineering Laboratory (INEL) site

Development of a Conceptual Framework to Measure the Social Impact of Burns.

Science.gov (United States)

Marino, Molly; Soley-Bori, Marina; Jette, Alan M; Slavin, Mary D; Ryan, Colleen M; Schneider, Jeffrey C; Resnik, Linda; Acton, Amy; Amaya, Flor; Rossi, Melinda; Soria-Saucedo, Rene; Kazis, Lewis E

Measuring community reintegration following burn injury is important to assess the efficacy of therapies designed to optimize recovery. This project aims to develop and validate a conceptual framework for understanding the social impact of burn injuries in adults. The framework is critical for developing the item banks used for a computerized adaptive test. We performed a comprehensive literature review and consulted with clinical experts and burn survivors about social life areas impacted by burn injury. Focus groups with burn survivors and clinicians were conducted to inform and validate the framework. Transcripts were coded using grounded theory methodology. The World Health Organization's International Classification of Functioning, Disability and Health, was chosen to ground the content model. The primary construct identified was social participation, which contains two concepts: societal role and personal relationships. The subdomains chosen for item development were work, recreation and leisure, relating with strangers, and romantic, sexual, family, and informal relationships. Qualitative results strongly suggest that the conceptual model fits the constructs for societal role and personal relationships with the respective subdomains. This conceptual framework has guided the implementation of a large-scale calibration study currently underway which will lead to a computerized adaptive test for monitoring the social impacts of burn injuries during recovery.

The Conceptual Framework of the National eHealth Development Process

Directory of Open Access Journals (Sweden)

Rasa Rotomskienė (Juciūtė

2011-12-01

Full Text Available Summary. In April 2004 the European Commission adopted the eHealth Action Plan and urged the member states of the European Union to develop national eHealth implementation strategies and corresponding action plans to support their delivery. Extensive eHealth infrastructures and systems were soon viewed as central to the future provision of safe, efficient, high quality and citizen-centred healthcare. However, the ambitious plans and high expectations were soon followed by even larger failures. Based on the findings from the two international case studies undertaken by the article’s author, the article has presented the conceptual e-health development framework, which introduces a much more complex understanding of eHealth development processes than the prevailing technocratic view towards technology-led organisational change. Considerable attention is paid to the organisational changes that have to take place along and the role that stakeholders play while implementing technology-led organisational change in healthcare contexts.Purpose—the purpose of this article is to deliver a conceptual framework for the analysis of eHealth development, which would correspond to the contemporary needs of practical eHealth development.Design/methodology/approach—the research findings presented in the article were delivered using qualitative research methodology and associated research methods such as document analysis, in-depth interviews and participant observation.Findings—the article has delivered a conceptual framework of eHealth development at the national level.Research limitations/implications—the research findings are based on two international case studies undertaken by the author in the UK. While using the results in other countries, local realities and contexts have to be taken into account.Practical implications—the article has presented empirically grounded new insights in relation to eHealth development at the national level. These

Conceptualizing Pharmaceutical Plants

DEFF Research Database (Denmark)

Larsen, Bent Dalgaard; Jensen, Klaes Ladeby; Gjøl, Mikkel

2006-01-01

In the conceptual design phase of pharmaceutical plants as much as 80%-90% of the total cost of a project is committed. It is therefore essential that the chosen concept is viable. In this design process configuration and 3D models can help validate the decisions made. Designing 3D models...... is a complex task and requires skilled users. We demonstrate that a simple 2D/3D configuration tool can support conceptualizing of pharmaceutical plants. Present paper reports on preliminary results from a full scale implementation project at a Danish engineering company....

Flow behavior of N2 huff and puff process for enhanced oil recovery in tight oil reservoirs.

Science.gov (United States)

Lu, Teng; Li, Zhaomin; Li, Jian; Hou, Dawei; Zhang, Dingyong

2017-11-16

In the present work, the potential of N 2 huff and puff process to enhance the recovery of tight oil reservoir was evaluated. N 2 huff and puff experiments were performed in micromodels and cores to investigate the flow behaviors of different cycles. The results showed that, in the first cycle, N 2 was dispersed in the oil, forming the foamy oil flow. In the second cycle, the dispersed gas bubbles gradually coalesced into the continuous gas phase. In the third cycle, N 2 was produced in the form of continuous gas phase. The results from the coreflood tests showed that, the primary recovery was only 5.32%, while the recoveries for the three N 2 huff and puff cycles were 15.1%, 8.53% and 3.22%, respectively.The recovery and the pressure gradient in the first cycle were high. With the increase of huff and puff cycles, and the oil recovery and the pressure gradient rapidly decreased. The oil recovery of N 2 huff and puff has been found to increase as the N 2 injection pressure and the soaking time increased. These results showed that, the properly designed and controlled N 2 huff and puff process can lead to enhanced recovery of tight oil reservoirs.

Tenth oil recovery conference

International Nuclear Information System (INIS)

Sleeper, R.

1993-01-01

The Tertiary Oil Recovery Project is sponsored by the State of Kansas to introduce Kansas producers to the economic potential of enhanced recovery methods for Kansas fields. Specific objectives include estimation of the state-wide tertiary oil resource, identification and evaluation of the most applicable processes, dissemination of technical information to producers, occasional collaboration on recovery projects, laboratory studies on Kansas applicable processes, and training of students and operators in tertiary oil recovery methods. Papers have been processed separately for inclusion on the data base

DEVELOPMENT AND DEMONSTRATION OF INTEGRATED CARBON RECOVERY SYSTEMS FROM FINE COAL PROCESSING WASTE

Energy Technology Data Exchange (ETDEWEB)

Y.P. Chugh; D. Patil; A. Patwardhan; R.Q. Honaker; B.K. Parekh; D. Tao; Latif Khan

2000-07-01

The project involves the development of an efficient, environmentally friendly system for the economical recovery of carbon from fine-coal refuse ponds. The project will be conducted in two phases. Phase I was involved in the development and evaluation of process equipment and techniques to be used in carbon recovery, product dewatering and reconstitution, and refuse management. Phase II will integrate the various units into a continuously operating circuit that will be demonstrated at a site selected based on the results presented in this study.

Conservation physiology can inform threat assessment and recovery planning processes for threatened species

DEFF Research Database (Denmark)

Birnie-Gauvin, Kim; Walton, Sarah; Delle Palme, Caleigh A.

2017-01-01

threat assessments and work with partners to develop recovery plans. Here we argue that conservation physiology has much to offer for the threat assessment process and outline the ways in which this can be operationalized. For instance, conservation physiology is effective at revealing causal...... role in the conservation activities of bodies like the IUCN that are engaged in threat assessment and recovery of endangered organisms. Although we focus on activities at the international scale, these same concepts are relevant and applicable to national and regional bodies...

Global sensitivity analysis of Alkali-Surfactant-Polymer enhanced oil recovery processes

Energy Technology Data Exchange (ETDEWEB)

Carrero, Enrique; Queipo, Nestor V.; Pintos, Salvador; Zerpa, Luis E. [Applied Computing Institute, Faculty of Engineering, University of Zulia, Zulia (Venezuela)

2007-08-15

After conventional waterflooding processes the residual oil in the reservoir remains as a discontinuous phase in the form of oil drops trapped by capillary forces and is likely to be around 70% of the original oil in place (OOIP). The EOR method so-called Alkaline-Surfactant-Polymer (ASP) flooding has been proved to be effective in reducing the oil residual saturation in laboratory experiments and field projects through reduction of interfacial tension and mobility ratio between oil and water phases. A critical step for the optimal design and control of ASP recovery processes is to find the relative contributions of design variables such as, slug size and chemical concentrations, in the variability of given performance measures (e.g., net present value, cumulative oil recovery), considering a heterogeneous and multiphase petroleum reservoir (sensitivity analysis). Previously reported works using reservoir numerical simulation have been limited to local sensitivity analyses because a global sensitivity analysis may require hundreds or even thousands of computationally expensive evaluations (field scale numerical simulations). To overcome this issue, a surrogate-based approach is suggested. Surrogate-based analysis/optimization makes reference to the idea of constructing an alternative fast model (surrogate) from numerical simulation data and using it for analysis/optimization purposes. This paper presents an efficient global sensitivity approach based on Sobol's method and multiple surrogates (i.e., Polynomial Regression, Kriging, Radial Base Functions and a Weighed Adaptive Model), with the multiple surrogates used to address the uncertainty in the analysis derived from plausible alternative surrogate-modeling schemes. The proposed approach was evaluated in the context of the global sensitivity analysis of a field scale Alkali-Surfactant-Polymer flooding process. The design variables and the performance measure in the ASP process were selected as slug size

Operation room tool handling and miscommunication scenarios: an object-process methodology conceptual model.

Science.gov (United States)

Wachs, Juan P; Frenkel, Boaz; Dori, Dov

2014-11-01

Errors in the delivery of medical care are the principal cause of inpatient mortality and morbidity, accounting for around 98,000 deaths in the United States of America (USA) annually. Ineffective team communication, especially in the operation room (OR), is a major root of these errors. This miscommunication can be reduced by analyzing and constructing a conceptual model of communication and miscommunication in the OR. We introduce the principles underlying Object-Process Methodology (OPM)-based modeling of the intricate interactions between the surgeon and the surgical technician while handling surgical instruments in the OR. This model is a software- and hardware-independent description of the agents engaged in communication events, their physical activities, and their interactions. The model enables assessing whether the task-related objectives of the surgical procedure were achieved and completed successfully and what errors can occur during the communication. The facts used to construct the model were gathered from observations of various types of operations miscommunications in the operating room and its outcomes. The model takes advantage of the compact ontology of OPM, which is comprised of stateful objects - things that exist physically or informatically, and processes - things that transform objects by creating them, consuming them or changing their state. The modeled communication modalities are verbal and non-verbal, and errors are modeled as processes that deviate from the "sunny day" scenario. Using OPM refinement mechanism of in-zooming, key processes are drilled into and elaborated, along with the objects that are required as agents or instruments, or objects that these processes transform. The model was developed through an iterative process of observation, modeling, group discussions, and simplification. The model faithfully represents the processes related to tool handling that take place in an OR during an operation. The specification is at

Screening of microorganisms for microbial enhanced oil recovery processes

Energy Technology Data Exchange (ETDEWEB)

Yonebayashi, H. [Japan National Oil Corp., Tokyo (Japan); Yoshida, S. [Japan Food Research Laboratiories, Tokyo (Japan). Div. of Microbiology; Ono, K. [Japan National Oil Corp., Chiba (Japan). Tech. Research Center; Enomoto, H. [Tohoku University, Sendai (Japan). Dept. of Geoscience and Tech.

2000-01-01

The objective of this study is to screen effective microorganisms for the Microbial Enhanced Oil Recovery process (or simply as MEOR). Samples of drilling cuttings, formation water, and soil were collected from domestic drilling sites and oil fields. Moreover, samples of activated-sludge and compost were collected from domestic sewage treatment facility and food treatment facility. At first, microorganisms in samples were investigated by incubation with different media; then they were isolated. By two stage-screening based on metabolizing ability, 4 strains (Bacillus licheniformis TRC-18-2-a, Enterobacter cloacae TRC-322, Bacillus subtilis TRC-4118, and Bacillus subtilis TRC-4126) were isolated as effective microorganisms for oil recovery. B. licheniformis TRC-18-2-a is a multifunctional microorganism possessing excellent surfactant productivity, and in addition it has gas, acid and polymer productivities. E. cloacae TRC-332 has gas and acid producing abilities. B. subtilis TRC-4118 and TRC-4126 are effective biosurfactant producers, and they reduce the interfacial tension to 0.04 and 0.12 dyne/cm, respectively. (author)

Retrofit of heat exchanger networks with pressure recovery of process streams at sub-ambient conditions

International Nuclear Information System (INIS)

Onishi, Viviani C.; Ravagnani, Mauro A.S.S.; Caballero, José A.

2015-01-01

Highlights: • New mathematical model for heat exchanger networks retrofit with pressure recovery. • Optimal heat and work integration applied to the retrofit of sub-ambient processes. • Streams pressure manipulation is used to enhance heat integration of the system. • Compressors and turbines can act on a coupling shaft and/or as stand-alone equipment. • Use of smaller amount of cold utilities, reducing significantly the operational costs. - Abstract: This paper presents a new mathematical programming model for the retrofit of heat exchanger networks (HENs), wherein the pressure recovery of process streams is conducted to enhance heat integration. Particularly applied to cryogenic processes, HENs retrofit with combined heat and work integration is mainly aimed at reducing the use of expensive cold services. The proposed multi-stage superstructure allows the increment of the existing heat transfer area, as well as the use of new equipment for both heat exchange and pressure manipulation. The pressure recovery of streams is carried out simultaneously with the HEN design, such that the process conditions (streams pressure and temperature) are variables of optimization. The mathematical model is formulated using generalized disjunctive programming (GDP) and is optimized via mixed-integer nonlinear programming (MINLP), through the minimization of the retrofit total annualized cost, considering the turbine and compressor coupling with a helper motor. Three case studies are performed to assess the accuracy of the developed approach, including a real industrial example related to liquefied natural gas (LNG) production. The results show that the pressure recovery of streams is efficient for energy savings and, consequently, for decreasing the HEN retrofit total cost especially in sub-ambient processes

Service user experiences of REFOCUS: a process evaluation of a pro-recovery complex intervention.

Science.gov (United States)

Wallace, Genevieve; Bird, Victoria; Leamy, Mary; Bacon, Faye; Le Boutillier, Clair; Janosik, Monika; MacPherson, Rob; Williams, Julie; Slade, Mike

2016-09-01

Policy is increasingly focused on implementing a recovery-orientation within mental health services, yet the subjective experience of individuals receiving a pro-recovery intervention is under-studied. The aim of this study was to explore the service user experience of receiving a complex, pro-recovery intervention (REFOCUS), which aimed to encourage the use of recovery-supporting tools and support recovery-promoting relationships. Interviews (n = 24) and two focus groups (n = 13) were conducted as part of a process evaluation and included a purposive sample of service users who received the complex, pro-recovery intervention within the REFOCUS randomised controlled trial (ISRCTN02507940). Thematic analysis was used to analyse the data. Participants reported that the intervention supported the development of an open and collaborative relationship with staff, with new conversations around values, strengths and goals. This was experienced as hope-inspiring and empowering. However, others described how the recovery tools were used without context, meaning participants were unclear of their purpose and did not see their benefit. During the interviews, some individuals struggled to report any new tasks or conversations occurring during the intervention. Recovery-supporting tools can support the development of a recovery-promoting relationship, which can contribute to positive outcomes for individuals. The tools should be used in a collaborative and flexible manner. Information exchanged around values, strengths and goals should be used in care-planning. As some service users struggled to report their experience of the intervention, alternative evaluation approaches need to be considered if the service user experience is to be fully captured.

Conceptual structure design of experimental facility for advanced spent fuel conditioning process

International Nuclear Information System (INIS)

Joo, J. S.; Koo, J. H.; Jung, W. M.; Jo, I. J.; Kook, D. H.; Yoo, K. S.

2003-01-01

A study on the advanced spent fuel conditioning process (ACP) is carring out for the effective management of spent fuels of domestic nuclear power plants. This study presents basic shielding design, modification of IMEF's reserve hot cell facility which reserved for future usage, conceptual and structural architecture design of ACP hot cell and its contents, etc. considering the characteristics of ACP. The results of this study will be used for the basic and detail design of ACP demonstration facility, and utilized as basic data for the safety evaluation as essential data for the licensing of the ACP facility

Heteromodal conceptual processing in the angular gyrus

OpenAIRE

Bonner, Michael F.; Peelle, Jonathan E.; Cook, Philip A.; Grossman, Murray

2013-01-01

Concepts bind together the features commonly associated with objects and events to form networks in long-term semantic memory. These conceptual networks are the basis of human knowledge and underlie perception, imagination, and the ability to communicate about experiences and the contents of the environment. Although it is often assumed that this distributed semantic information is integrated in higher-level heteromodal association cortices, open questions remain about the role and anatomic b...

Improved NGL recovery designs maximize operating flexibility and product recoveries

International Nuclear Information System (INIS)

Wilkinson, J.D.; Hudson, H.M.

1992-01-01

This paper reports that the historically cyclical nature in the market for ethane and propane has demonstrated the need for flexible natural gas liquids (NGL) recovery plants. NEwly developed and patented processes are now available which can provide ultra-high recovery of ethane (95%+) when demand for ethane is high and provide essentially complete ethane rejection without the normally concomitant reduction in propane recovery. This provides plant operators the flexibility to respond more readily to NGL market conditions, thus maximizing plant operating profits. The new process designs provide this flexibility without increasing utility requirements. In fact, utility consumption is often lower when compared to conventional designs. This same process technology can also be easily retrofit into existing plants with relatively quick payout of the modifications from both recovery and efficiency improvements

Mathematical models for the efficiency of flotation process for the recovery of north waziristan copper

International Nuclear Information System (INIS)

Ali, S.; Rahman, S.U.; Khan, M.M.

2007-01-01

Mathematical models were developed to give an insight into the effect of process variables, propylxanthae (X/sub 1/ g/ton), pH (X/sub 2/), sodium sulphide (X3 g/ton) and sodium cyanide (X/sub 4/ g/ton), on the recovery (YR) of copper. The optimum recovery (YR) 62.95%, was obtained at X/sub 4/=60g/ton. (author)

Can color changes alter the neural correlates of recognition memory? Manipulation of processing affects an electrophysiological indicator of conceptual implicit memory.

Science.gov (United States)

Cui, Xiaoyu; Gao, Chuanji; Zhou, Jianshe; Guo, Chunyan

2016-09-28

It has been widely shown that recognition memory includes two distinct retrieval processes: familiarity and recollection. Many studies have shown that recognition memory can be facilitated when there is a perceptual match between the studied and the tested items. Most event-related potential studies have explored the perceptual match effect on familiarity on the basis of the hypothesis that the specific event-related potential component associated with familiarity is the FN400 (300-500 ms mid-frontal effect). However, it is currently unclear whether the FN400 indexes familiarity or conceptual implicit memory. In addition, on the basis of the findings of a previous study, the so-called perceptual manipulations in previous studies may also involve some conceptual alterations. Therefore, we sought to determine the influence of perceptual manipulation by color changes on recognition memory when the perceptual or the conceptual processes were emphasized. Specifically, different instructions (perceptually or conceptually oriented) were provided to the participants. The results showed that color changes may significantly affect overall recognition memory behaviorally and that congruent items were recognized with a higher accuracy rate than incongruent items in both tasks, but no corresponding neural changes were found. Despite the evident familiarity shown in the two tasks (the behavioral performance of recognition memory was much higher than at the chance level), the FN400 effect was found in conceptually oriented tasks, but not perceptually oriented tasks. It is thus highly interesting that the FN400 effect was not induced, although color manipulation of recognition memory was behaviorally shown, as seen in previous studies. Our findings of the FN400 effect for the conceptual but not perceptual condition support the explanation that the FN400 effect indexes conceptual implicit memory.

A hydrometallurgical process for the recovery of terbium from fluorescent lamps: Experimental design, optimization of acid leaching process and process analysis.

Science.gov (United States)

Innocenzi, Valentina; Ippolito, Nicolò Maria; De Michelis, Ida; Medici, Franco; Vegliò, Francesco

2016-12-15

Terbium and rare earths recovery from fluorescent powders of exhausted lamps by acid leaching with hydrochloric acid was the objective of this study. In order to investigate the factors affecting leaching a series of experiments was performed in according to a full factorial plan with four variables and two levels (4 2 ). The factors studied were temperature, concentration of acid, pulp density and leaching time. Experimental conditions of terbium dissolution were optimized by statistical analysis. The results showed that temperature and pulp density were significant with a positive and negative effect, respectively. The empirical mathematical model deducted by experimental data demonstrated that terbium content was completely dissolved under the following conditions: 90 °C, 2 M hydrochloric acid and 5% of pulp density; while when the pulp density was 15% an extraction of 83% could be obtained at 90 °C and 5 M hydrochloric acid. Finally a flow sheet for the recovery of rare earth elements was proposed. The process was tested and simulated by commercial software for the chemical processes. The mass balance of the process was calculated: from 1 ton of initial powder it was possible to obtain around 160 kg of a concentrate of rare earths having a purity of 99%. The main rare earths elements in the final product was yttrium oxide (86.43%) following by cerium oxide (4.11%), lanthanum oxide (3.18%), europium oxide (3.08%) and terbium oxide (2.20%). The estimated total recovery of the rare earths elements was around 70% for yttrium and europium and 80% for the other rare earths. Copyright © 2016 Elsevier Ltd. All rights reserved.

Collective (Team) Learning Process Models: A Conceptual Review

Science.gov (United States)

Knapp, Randall

2010-01-01

Teams have become a key resource for learning and accomplishing work in organizations. The development of collective learning in specific contexts is not well understood, yet has become critical to organizational success. The purpose of this conceptual review is to inform human resource development (HRD) practice about specific team behaviors and…

A New Screening Methodology for Improved Oil Recovery Processes Using Soft-Computing Techniques

Science.gov (United States)

Parada, Claudia; Ertekin, Turgay

2010-05-01

The first stage of production of any oil reservoir involves oil displacement by natural drive mechanisms such as solution gas drive, gas cap drive and gravity drainage. Typically, improved oil recovery (IOR) methods are applied to oil reservoirs that have been depleted naturally. In more recent years, IOR techniques are applied to reservoirs even before their natural energy drive is exhausted by primary depletion. Descriptive screening criteria for IOR methods are used to select the appropriate recovery technique according to the fluid and rock properties. This methodology helps in assessing the most suitable recovery process for field deployment of a candidate reservoir. However, the already published screening guidelines neither provide information about the expected reservoir performance nor suggest a set of project design parameters, which can be used towards the optimization of the process. In this study, artificial neural networks (ANN) are used to build a high-performance neuro-simulation tool for screening different improved oil recovery techniques: miscible injection (CO2 and N2), waterflooding and steam injection processes. The simulation tool consists of proxy models that implement a multilayer cascade feedforward back propagation network algorithm. The tool is intended to narrow the ranges of possible scenarios to be modeled using conventional simulation, reducing the extensive time and energy spent in dynamic reservoir modeling. A commercial reservoir simulator is used to generate the data to train and validate the artificial neural networks. The proxy models are built considering four different well patterns with different well operating conditions as the field design parameters. Different expert systems are developed for each well pattern. The screening networks predict oil production rate and cumulative oil production profiles for a given set of rock and fluid properties, and design parameters. The results of this study show that the networks are

Process for the recovery of curium-244 from nuclear waste

International Nuclear Information System (INIS)

Posey, J.C.

1980-10-01

A process has been designed for the recovery of curium from purex waste. Curium and americium are separated from the lanthanides by a TALSPEAK extraction process using differential extraction. Equations were derived for the estimation of the economically optimum conditions for the extraction using laboratory batch extraction data. The preparation of feed for the extraction involves the removal of nitric acid from the Purex waste by vaporization under reduced pressure, the leaching of soluble nitrates from the resulting cake, and the oxalate precipitation of a pure lanthanide-actinide fraction. Final separation of the curium from americium is done by ion-exchange. The steps of the process, except ion-exchange, were tested on a laboratory scale and workable conditions were determined

Waste Heat Recovery and Recycling in Thermal Separation Processes: Distillation, Multi-Effect Evaporation (MEE) and Crystallization Processes

Energy Technology Data Exchange (ETDEWEB)

Emmanuel A. Dada; Chandrakant B. Panchal; Luke K. Achenie; Aaron Reichl; Chris C. Thomas

2012-12-03

Evaporation and crystallization are key thermal separation processes for concentrating and purifying inorganic and organic products with energy consumption over 1,000 trillion Btu/yr. This project focused on a challenging task of recovering low-temperature latent heat that can have a paradigm shift in the way thermal process units will be designed and operated to achieve high-energy efficiency and significantly reduce the carbon footprint as well as water footprint. Moreover, this project has evaluated the technical merits of waste-heat powered thermal heat pumps for recovery of latent heat from distillation, multi-effect evaporation (MEE), and crystallization processes and recycling into the process. The Project Team has estimated the potential energy, economics and environmental benefits with the focus on reduction in CO2 emissions that can be realized by 2020, assuming successful development and commercialization of the technology being developed. Specifically, with aggressive industry-wide applications of heat recovery and recycling with absorption heat pumps, energy savings of about 26.7 trillion Btu/yr have been estimated for distillation process. The direct environmental benefits of this project are the reduced emissions of combustible products. The estimated major reduction in environmental pollutants in the distillation processes is in CO2 emission equivalent to 3.5 billion lbs/year. Energy consumption associated with water supply and treatments can vary between 1,900 kWh and 23,700 kWh per million-gallon water depending on sources of natural waters [US DOE, 2006]. Successful implementation of this technology would significantly reduce the demand for cooling-tower waters, and thereby the use and discharge of water treatment chemicals. The Project Team has also identified and characterized working fluid pairs for the moderate-temperature heat pump. For an MEE process, the two promising fluids are LiNO3+KNO3+NANO3 (53:28:19 ) and LiNO3+KNO3+NANO2

Recovery from cannabis use disorders: Abstinence versus moderation and treatment-assisted recovery versus natural recovery.

Science.gov (United States)

Stea, Jonathan N; Yakovenko, Igor; Hodgins, David C

2015-09-01

The present study of recovery from cannabis use disorders was undertaken with 2 primary objectives that address gaps in the literature. The first objective was to provide an exploratory portrait of the recovery process from cannabis use disorders, comparing individuals who recovered naturally with those who were involved in treatment. The second objective was to explore systematically the similarities and differences between abstinence and moderation recoveries. Adults who have recovered from a cannabis use disorder were recruited in the community (N = 119). The abstinence and treatment-assisted participants exhibited higher levels of lifetime cannabis problem severity than the moderation and natural recovery participants, respectively. As well, cognitive factors were identified as the most useful strategies for recovery (e.g., thinking about benefits and negative consequences of cannabis), followed by behavioral factors (e.g., avoidance of triggers for use and high-risk situations). Findings lend further support to the effectiveness of cognitive, motivational, and behavioral strategies as helpful actions and maintenance factors involved in the recovery process. The findings also generally support the idea that cannabis use disorders lie on a continuum of problem severity, with moderation and natural recoveries more likely to occur at the lower end of the continuum and abstinence and treatment-assisted recoveries more likely to occur at the upper end. (c) 2015 APA, all rights reserved).

Auditory processing during deep propofol sedation and recovery from unconsciousness

OpenAIRE

Koelsch, Stefan; Heinke, Wolfgang; Sammler, Daniela; Olthoff, Derk

2006-01-01

Objective Using evoked potentials, this study investigated effects of deep propofol sedation, and effects of recovery from unconsciousness, on the processing of auditory information with stimuli suited to elicit a physical MMN, and a (music-syntactic) ERAN. Methods Levels of sedation were assessed using the Bispectral Index (BIS) and the Modified Observer's Assessment of Alertness and Sedation Scale (MOAAS). EEG-measurements were performed during wakefulness, deep propofol sedation (MOAAS 2–3...

Knowledge is power: how conceptual knowledge transforms visual cognition.

Science.gov (United States)

Collins, Jessica A; Olson, Ingrid R

2014-08-01

In this review, we synthesize the existing literature demonstrating the dynamic interplay between conceptual knowledge and visual perceptual processing. We consider two theoretical frameworks that demonstrate interactions between processes and brain areas traditionally considered perceptual or conceptual. Specifically, we discuss categorical perception, in which visual objects are represented according to category membership, and highlight studies showing that category knowledge can penetrate early stages of visual analysis. We next discuss the embodied account of conceptual knowledge, which holds that concepts are instantiated in the same neural regions required for specific types of perception and action, and discuss the limitations of this framework. We additionally consider studies showing that gaining abstract semantic knowledge about objects and faces leads to behavioral and electrophysiological changes that are indicative of more efficient stimulus processing. Finally, we consider the role that perceiver goals and motivation may play in shaping the interaction between conceptual and perceptual processing. We hope to demonstrate how pervasive such interactions between motivation, conceptual knowledge, and perceptual processing are in our understanding of the visual environment, and to demonstrate the need for future research aimed at understanding how such interactions arise in the brain.

Taiwanese women's process of recovery from stillbirth: a qualitative descriptive study.

Science.gov (United States)

Tseng, Ying-Fen; Chen, Chung-Hey; Wang, Hsiu-Hung

2014-06-01

The purpose of this qualitative descriptive study was to portray the recovery process of Taiwanese women after stillbirth. Data were generated through individual in-depth interviews with 21 women selected using purposeful sampling. Three stages in an emotional journey of recovery were suffering from silent grief, searching for a way out, and achieving peace of mind and mental stability. Throughout their journey, the women's overarching concern was where the deceased child had gone and whether it was well. Together these stages composed A pathway to peace of mind, a mental journey on which women struggled to spiritually connect with the lost baby and finally sought a personal pathway to emotional peace. Findings can inform healthcare providers in providing culturally sensitive care for Taiwanese women to facilitate healing after a stillbirth. © 2014 Wiley Periodicals, Inc.

Sulfomethylated lignite salt as a sacrifical agent in oil recovery processes

Energy Technology Data Exchange (ETDEWEB)

Kudchadker, M.V.; Weiss, W.J.

1978-02-07

A process is described for recovering petroleum from oil reservoirs by secondary recovery methods. The process involves injecting via an injection well into the reservoir an aqueous solution of sulfomethylated lignite salt as a sacrificial agent to inhibit the deposition of surfactant and polymer on the reservoir matrix. The process is conducted by first injecting the lignite salt into the formation through the injection well and following it with either a polymer or a surfactant solution, which also may contain the lignite salt. The polymer or surfactant would then be followed by a drive fluid, such as water, to push the chemicals and oil to the production well. (18 claims)

Solar Energy for a Solvent Recovery Stage in a Biodiesel Production Process

Directory of Open Access Journals (Sweden)

José A. León

2016-01-01

Full Text Available Recent research and development of clean energy have become essential due to the global climate change problem, which is caused largely by fossil fuels burning. Therefore, biodiesel, a renewable and ecofriendly biofuel with less environmental impact than diesel, continues expanding worldwide. The process for biodiesel production involves a significant energy demand, specifically in the methanol recovery stage through a flash separator and a distillation column. Traditionally, the energy required for this process is supplied by fossil fuels. It represents an opportunity for the application of renewable energy. Hence, the current study presents a system of thermal energy storage modeled in TRNSYS® and supported by simulations performed in ASPEN PLUS®. The aim of this research was to supply solar energy for a methanol recovery stage in a biodiesel production process. The results highlighted that it is feasible to meet 91% of the energy demand with an array of 9 parabolic trough collectors. The array obtained from the simulation was 3 in series and 3 in parallel, with a total area of 118.8 m2. It represents an energy saving of 70 MWh per year.

Phosphorus recovery from sewage sludge ash through an electrodialytic process

DEFF Research Database (Denmark)

Guedes, Paula; Couto, Nazare; Ottosen, Lisbeth M.

2014-01-01

The electrodialytic separation process (ED) was applied to sewage sludge ash (SSA) aiming at phosphorus (P) recovery. As the SSA may have high heavy metals contents, their removal was also assessed. Two SSA were sampled, one immediately after incineration (SA) and the other from an open deposit (SB......). Both samples were ED treated as stirred suspensions in sulphuric acid for 3,7 and 14 days. After 14 days, phosphorus was mainly mobilized towards the anode end (approx. 60% in the SA and 70% in the SB), whereas heavy metals mainly electromigrated towards the cathode end. The anolyte presented...... a composition of 98% of P, mainly as orthophosphate, and 2% of heavy metals. The highest heavy metal removal was achieved for Cu (ca. 80%) and the lowest for Pb and Fe (between 4% and 6%). The ED showed to be a viable method for phosphorus recovery from SSA, as it promotes the separation of P from the heavy...

Conceptual design on uranium recovery plant from seawater

International Nuclear Information System (INIS)

Kato, Toshiaki; Okugawa, Katsumi; Sugihara, Yutaka; Matsumura, Tsuyoshi

1999-01-01

Uranium containing in seawater is extremely low concentration, which is about 3 mg (3 ppb) per 1 ton of seawater. Recently, a report on development of a more effective collector of uranium in seawater (a radiation graft polymerization product of amidoxime onto polyethylene fiber) was issued by Japan Atomic Energy Research Institute. In this paper, an outline design of a uranium recovery plant from seawater was conducted on a base of the collector. As a result of cost estimation, the collection cost of seawater uranium using this method was much higher than that of uranium mine on land and described in the Red Book for mineral uranium cost. In order to make the seawater uranium cost comparable to the on-land uranium cost, it is necessary to establish comprehensive efforts in future technical development, such as development in absorption property of uranium with the collector, resolution method using less HCl, and so forth. (G.K.)

Study on auto-plating process time versus recovery for polonium, Po-210 in environmental sample

International Nuclear Information System (INIS)

Jalal Sharib; Zaharudin Ahmad; Abdul Kadir Ishak; Norfaizal Mohamed; Ahmad Sanadi Abu Bakar; Yii Mei Wo; Kamarozaman Ishak; Siti Aminah Yusoff

2008-08-01

This study was carried out to evaluate time effectiveness and recovery 16 samples of 4 Kuala Muda stations during auto-plating process procedures for determination Polonium, Po 210 activity concentration in environmental sample. The study was performed using Kuala Muda sediment as sample in the same methodology. The auto-plating process runs for 4, 12, 24 and 30 hours on a silver disc for 4 samples each station, and then counted for one (1) day using an alpha spectrometry counting system. The objectives for this study is to justify on time duration for auto-plating process effecting a chemical yield of Po-209.The results showed recovery are increasing versus time and constantly at 24 hour auto-plating. Its mean, 24 hour is an optimum time for auto-plating process for determination of Polonium, Po 210 activity concentration in environmental sample. (Author)

40 CFR Appendix Xiii to Part 266 - Mercury Bearing Wastes That May Be Processed in Exempt Mercury Recovery Units

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Mercury Bearing Wastes That May Be Processed in Exempt Mercury Recovery Units XIII Appendix XIII to Part 266 Protection of Environment... XIII to Part 266—Mercury Bearing Wastes That May Be Processed in Exempt Mercury Recovery Units These...

A conceptual framework and classification of capability areas for business process maturity

Science.gov (United States)

Van Looy, Amy; De Backer, Manu; Poels, Geert

2014-03-01

The article elaborates on business process maturity, which indicates how well an organisation can perform based on its business processes, i.e. on its way of working. This topic is of paramount importance for managers who try to excel in today's competitive world. Hence, business process maturity is an emerging research field. However, no consensus exists on the capability areas (or skills) needed to excel. Moreover, their theoretical foundation and synergies with other fields are frequently neglected. To overcome this gap, our study presents a conceptual framework with six main capability areas and 17 sub areas. It draws on theories regarding the traditional business process lifecycle, which are supplemented by recognised organisation management theories. The comprehensiveness of this framework is validated by mapping 69 business process maturity models (BPMMs) to the identified capability areas, based on content analysis. Nonetheless, as a consensus neither exists among the collected BPMMs, a classification of different maturity types is proposed, based on cluster analysis and discriminant analysis. Consequently, the findings contribute to the grounding of business process literature. Possible future avenues are evaluating existing BPMMs, directing new BPMMs or investigating which combinations of capability areas (i.e. maturity types) contribute more to performance than others.

Process Recovery after CaO Addition Due to Granule Formation in a CSTR Co-Digester—A Tool to Influence the Composition of the Microbial Community and Stabilize the Process?

Science.gov (United States)

Liebrich, Marietta; Kleyböcker, Anne; Kasina, Monika; Miethling-Graff, Rona; Kassahun, Andrea; Würdemann, Hilke

2016-01-01

The composition, structure and function of granules formed during process recovery with calcium oxide in a laboratory-scale fermenter fed with sewage sludge and rapeseed oil were studied. In the course of over-acidification and successful process recovery, only minor changes were observed in the bacterial community of the digestate, while granules appeared during recovery. Fluorescence microscopic analysis of the granules showed a close spatial relationship between calcium and oil and/or long chain fatty acids. This finding further substantiated the hypothesis that calcium precipitated with carbon of organic origin and reduced the negative effects of overloading with oil. Furthermore, the enrichment of phosphate minerals in the granules was shown, and molecular biological analyses detected polyphosphate-accumulating organisms as well as methanogenic archaea in the core. Organisms related to Methanoculleus receptaculi were detected in the inner zones of a granule, whereas they were present in the digestate only after process recovery. This finding indicated more favorable microhabitats inside the granules that supported process recovery. Thus, the granule formation triggered by calcium oxide addition served as a tool to influence the composition of the microbial community and to stabilize the process after overloading with oil. PMID:27681911

Process Recovery after CaO Addition Due to Granule Formation in a CSTR Co-Digester-A Tool to Influence the Composition of the Microbial Community and Stabilize the Process?

Science.gov (United States)

Liebrich, Marietta; Kleyböcker, Anne; Kasina, Monika; Miethling-Graff, Rona; Kassahun, Andrea; Würdemann, Hilke

2016-03-17

The composition, structure and function of granules formed during process recovery with calcium oxide in a laboratory-scale fermenter fed with sewage sludge and rapeseed oil were studied. In the course of over-acidification and successful process recovery, only minor changes were observed in the bacterial community of the digestate, while granules appeared during recovery. Fluorescence microscopic analysis of the granules showed a close spatial relationship between calcium and oil and/or long chain fatty acids. This finding further substantiated the hypothesis that calcium precipitated with carbon of organic origin and reduced the negative effects of overloading with oil. Furthermore, the enrichment of phosphate minerals in the granules was shown, and molecular biological analyses detected polyphosphate-accumulating organisms as well as methanogenic archaea in the core. Organisms related to Methanoculleus receptaculi were detected in the inner zones of a granule, whereas they were present in the digestate only after process recovery. This finding indicated more favorable microhabitats inside the granules that supported process recovery. Thus, the granule formation triggered by calcium oxide addition served as a tool to influence the composition of the microbial community and to stabilize the process after overloading with oil.

Process Recovery after CaO Addition Due to Granule Formation in a CSTR Co-Digester—A Tool to Influence the Composition of the Microbial Community and Stabilize the Process?

Directory of Open Access Journals (Sweden)

Marietta Liebrich

2016-03-01

Full Text Available The composition, structure and function of granules formed during process recovery with calcium oxide in a laboratory-scale fermenter fed with sewage sludge and rapeseed oil were studied. In the course of over-acidification and successful process recovery, only minor changes were observed in the bacterial community of the digestate, while granules appeared during recovery. Fluorescence microscopic analysis of the granules showed a close spatial relationship between calcium and oil and/or long chain fatty acids. This finding further substantiated the hypothesis that calcium precipitated with carbon of organic origin and reduced the negative effects of overloading with oil. Furthermore, the enrichment of phosphate minerals in the granules was shown, and molecular biological analyses detected polyphosphate-accumulating organisms as well as methanogenic archaea in the core. Organisms related to Methanoculleus receptaculi were detected in the inner zones of a granule, whereas they were present in the digestate only after process recovery. This finding indicated more favorable microhabitats inside the granules that supported process recovery. Thus, the granule formation triggered by calcium oxide addition served as a tool to influence the composition of the microbial community and to stabilize the process after overloading with oil.

Efficient ethanol recovery from fermentation broths with integrated distillation-vapor permeation hybrid process

Science.gov (United States)

The energy demand of distillation-molecular sieve systems for ethanol recovery/dehydration can be significant, particularly for dilute solutions. An alternative hybrid process integrating vapor stripping (like a beer still) with vapor compression and a vapor permeation membrane s...

Conceptual IT model

Science.gov (United States)

Arnaoudova, Kristina; Stanchev, Peter

2015-11-01

The business processes are the key asset for every organization. The design of the business process models is the foremost concern and target among an organization's functions. Business processes and their proper management are intensely dependent on the performance of software applications and technology solutions. The paper is attempt for definition of new Conceptual model of IT service provider, it could be examined as IT focused Enterprise model, part of Enterprise Architecture (EA) school.

Racial and Socioeconomic Differences Manifest in Process Measure Adherence for Enhanced Recovery After Surgery Pathway.

Science.gov (United States)

Leeds, Ira L; Alimi, Yewande; Hobson, Deborah R; Efron, Jonathan E; Wick, Elizabeth C; Haut, Elliott R; Johnston, Fabian M

2017-10-01

Adherence to care processes and surgical outcomes varies by population subgroups for the same procedure. Enhanced recovery after surgery pathways are intended to standardize care, but their effect on process adherence and outcomes for population subgroups is unknown. This study aims to demonstrate the association between recovery pathway implementation, process measures, and short-term surgical outcomes by population subgroup. This study is a pre- and post-quality improvement implementation cohort study. This study was conducted at a tertiary academic medical center. A modified colorectal enhanced recovery after surgery pathway was implemented. Patients were included who had elective colon and rectal resections before (2013) and following (2014-2016) recovery pathway implementation. Thirty-day outcomes by race and socioeconomic status were analyzed using a difference-in-difference approach with correlation to process adherence. We identified 639 cases (199 preimplementation, 440 postimplementation). In these cases, 75.2% of the patients were white, and 91.7% had a high socioeconomic status. Groups were similar in terms of other preoperative characteristics. Following pathway implementation, median lengths of stay improved in all subgroups (-1.0 days overall, p ≤ 0.001), but with no statistical difference by race or socioeconomic status (p = 0.89 and p = 0.29). Complication rates in both racial and socioeconomic groups were no different (26.4% vs 28.8%, p = 0.73; 27.3% vs 25.0%, p = 0.86) and remained unchanged with implementation (p = 0.93, p = 0.84). By race, overall adherence was 31.7% in white patients and 26.5% in nonwhite patients (p = 0.32). Although stratification by socioeconomic status demonstrated decreased overall adherence in the low-status group (31.8% vs 17.1%, p = 0.05), white patients were more likely to have regional pain therapy (57.1% vs 44.1%, p = 0.02) with a similar trend seen with socioeconomic status. Data were collected primarily for

Recovery from a psychiatrist's viewpoint.

Science.gov (United States)

Diamond, Ronald J

2006-09-01

Recovery is not the same as cure. Recovery from mental illness is the process of having more to life than just illness. It is an ongoing process rather than simply a goal that can be achieved. Recovery from the stigma of mental illness may be as difficult as recovery from the illness itself. Several common, but incorrect, beliefs can interfere with the recovery process. Myths include the belief that the illness has an inherently downhill course, that rehabilitation is useful only after stabilization, and that people with schizophrenia can only work at low-level jobs. People who have schizophrenia have reported that their own process of recovery was helped by their determination to get better, an understanding of the illness, taking personal responsibility, having friends who accept them, an optimistic attitude, and spiritual beliefs that help them find meaning in life.

Process Optimization for Valuable Metal Recovery from Dental Amalgam Residues

Directory of Open Access Journals (Sweden)

C.M. Parra–Mesa

2009-07-01

Full Text Available In this paper, the methodology used for optimizing leaching in a semi pilot plant is presented. This leaching process was applied to recover value metals from dental amalgam residues. 23 factorial design was used to characterize the process during the first stage and in the second one, a central compound rotational design was used for modeling copper percentage dissolved, a function of the nitric acid concentration, leaching time and temperature. This model explained the 81% of the response variability, which is considered satisfactory given the complexity of the process kinetics and, furthermore, it allowed the definition of the operation conditions for better copper recovery, which this was of 99.15%, at a temperature of 55°C, a concentration of 30% by weight and a time of 26 hours.

Perfectionism Across Stages of Recovery from Eating Disorders

Science.gov (United States)

Bardone-Cone, Anna M.; Sturm, Katrina; Lawson, Melissa A.; Robinson, D. Paul; Smith, Roma

2009-01-01

Objective This study examined perfectionism in relation to recovery from eating disorders by comparing different conceptualizations of perfectionism across healthy controls and fully recovered, partially recovered, and active eating disorder cases, where full recovery was defined using physical, behavioral, and psychological indices. Method Participants were primarily young adult females; 53 active eating disorder cases, 15 partially recovered cases, 20 fully recovered cases, and 67 healthy controls. Participants completed questionnaires assessing trait perfectionism, perfectionistic self-presentation style, and frequency of perfectionism cognitions, as well as a diagnostic interview to determine lifetime and current eating disorder diagnoses. Results A robust pattern emerged whereby the fully recovered eating disorder individuals and healthy controls had similar levels of perfectionism that were significantly lower than the perfectionism levels of the partially recovered and active eating disorder individuals, who were comparable to each other. Conclusion These findings have implications for more clearly defining eating disorder recovery and for the role perfectionism may play in achieving full recovery. PMID:19308994

Study on incineration technology of oil gas generated during the recovery process of oil spill

International Nuclear Information System (INIS)

Hou, Shuhn-Shyurng; Ko, Yung-Chang; Lin, Ta-Hui

2011-01-01

The objective of this study is to design, set up and operate an incinerator system capable of providing clean exhaust and safety control for burning oil gas generated during the recovery process of oil spill in Taiwan. In this study, we successfully develop a vertical-type incinerator, which consists of five oil gas burners with entrained primary air, a pilot burner, and an auxiliary burner. The incinerator system is equipped with necessary control units in order to achieve safe, easy, fast, and efficient operation. Flame appearance, flue gas temperature and CO emission of the incinerator system for burning oil gas are reported and discussed. Under the long-term operation, it is found that the new designed incinerator is satisfactory for burning oil gas with low supply pressure at various compositions and supply rates during the recovery process of oil spill. It is noteworthy that the results obtained herein are of great significance to provide a good guidance for those who need to design, set up and operate an incinerator system providing clean exhaust and safety control for burning oil gas generated during the recovery process of oil spill in a polluted site with a large area.

Study on incineration technology of oil gas generated during the recovery process of oil spill

Energy Technology Data Exchange (ETDEWEB)

Hou, Shuhn-Shyurng [Department of Mechanical Engineering, Kun Shan University, Tainan 71003 (China); Ko, Yung-Chang [China Steel Corporation, Kaohsiung 81233 (China); Lin, Ta-Hui [Department of Mechanical Engineering, National Cheng Kung University, Tainan 70101 (China)

2011-03-15

The objective of this study is to design, set up and operate an incinerator system capable of providing clean exhaust and safety control for burning oil gas generated during the recovery process of oil spill in Taiwan. In this study, we successfully develop a vertical-type incinerator, which consists of five oil gas burners with entrained primary air, a pilot burner, and an auxiliary burner. The incinerator system is equipped with necessary control units in order to achieve safe, easy, fast, and efficient operation. Flame appearance, flue gas temperature and CO emission of the incinerator system for burning oil gas are reported and discussed. Under the long-term operation, it is found that the new designed incinerator is satisfactory for burning oil gas with low supply pressure at various compositions and supply rates during the recovery process of oil spill. It is noteworthy that the results obtained herein are of great significance to provide a good guidance for those who need to design, set up and operate an incinerator system providing clean exhaust and safety control for burning oil gas generated during the recovery process of oil spill in a polluted site with a large area. (author)

Human trafficking and health: a conceptual model to inform policy, intervention and research.

Science.gov (United States)

Zimmerman, Cathy; Hossain, Mazeda; Watts, Charlotte

2011-07-01

Human trafficking is an international crime renowned for extreme forms of violence against women, men and children. Although trafficking-related violence has been well-documented, the health of trafficked persons has been a largely neglected topic. For people who are trafficked, health risks and consequences may begin before they are recruited into the trafficking process, continue throughout the period of exploitation and persist even after individuals are released. Policy-making, service provision and research often focus narrowly on criminal violations that occur during the period of exploitation, regularly overlooking the health implications of trafficking. Similarly, the public health sector has not yet incorporated human trafficking as a health concern. We present a conceptual model that highlights the migratory and exploitative nature of a multi-staged trafficking process, which includes: 'recruitment', travel-transit', 'exploitation' and 'integration' or 'reintegration', and for some trafficked persons, 'detention' and 're-trafficking' stages. Trafficked persons may suffer from physical, sexual and psychological harm, occupational hazards, legal restrictions and difficulties associated with being marginalised or stigmatised. Researchers and decision-makers will benefit from a theoretical approach that conceptualizes trafficking and health as a multi-staged process of cumulative harm. To address a health risk such as trafficking, which spans geographical boundaries and involves multiple sectors, including immigration and law enforcement, labour, social and health services, interventions must be coordinated between nations and across sectors to promote the protection and recovery of people who are trafficked. Copyright © 2011 Elsevier Ltd. All rights reserved.

Final report on impact of catchment scale processes and climate change on cause-effect and recovery-chains

NARCIS (Netherlands)

Verdonschot, P.F.M.; Keizer-Vlek, H.E.; Spears, B.; Brucet, S.; Johnson, R.; Feld, C.; Kernan, M.

2012-01-01

Catchment wide integrated basin management requires knowledge on cause-effect and recovery chains within water bodies as well as on the interactions between water bodies and categories. In the WISER WP6.4 recovery processes in rivers, lakes and estuarine and coastal waters were evaluated. The major

Methodology of life cycle cost with risk expenditure for offshore process at conceptual design stage

International Nuclear Information System (INIS)

Nam, Kiil; Chang, Daejun; Chang, Kwangpil; Rhee, Taejin; Lee, In-Beum

2011-01-01

This study proposed a new LCC (life cycle cost) methodology with the risk expenditure taken into account for comparative evaluation of offshore process options at their conceptual design stage. The risk expenditure consisted of the failure risk expenditure and the accident risk expenditure. The former accounted for the production loss and the maintenance expense due to equipment failures while the latter reflected the asset damage and the fatality worth caused by disastrous accidents such as fire and explosion. It was demonstrated that the new LCC methodology was capable of playing the role of a process selection basis in choosing the best of the liquefaction process options including the power generation systems for a floating LNG (Liquefied natural gas) production facility. Without the risk expenditure, a simple economic comparison apparently favored the mixed refrigerant cycle which had the better efficiency. The new methodology with the risk expenditure, however, indicated that the nitrogen expansion cycle driven by steam turbines should be the optimum choice, mainly due to its better availability and safety. -- Highlights: → The study presented the methodology of the LCC with the risk expenditure for the conceptual design of offshore processes. → The proposed methodology demonstrated the applicability of the liquefaction unit with the power generation system of LNG FPSO. → Without the risk expenditure, a simple economic comparison apparently favored the mixed refrigerant cycle which had the better efficiency. → The new methodology indicated that the nitrogen expansion cycle driven by steam turbines is the optimum choice due to its better availability and safety.

Viability analysis of heat recovery solution for industrial process of roasting coffee

Directory of Open Access Journals (Sweden)

Kljajić Miroslav V.

2016-01-01

Full Text Available Every industrial heat recovery solution is specific engineering challenge but not because predicted energy rationalization or achieved energy savings but potential unavoidable technological deviations and consequences on related processes and for sure, high investment because of delicate design and construction. Often, the energy savings in a particular segment of the industrial process is a main goal. However, in the food industry, especially roasting coffee, additional criteria has to be strictly observed and fulfilled. Such criteria may include prescribed and uniform product quality, compliance with food safety standards, stability of the processes etc., and all in the presence of key process parameters variability, inconsistency of raw material composition and quality, complexity of measurement and analytical methods etc. The paper respects all circumstances and checks viability of proposed recovery solution. The paper analyzes the possibility of using waste heat from the roasting process to ensure shortening of roasting cycle, reduction of fuel consumption and increasing capacity of roasting lines on daily basis. Analysis concludes that effects are valuable and substantial, although the complete solution is on the threshold of economic sustainability with numerous opportunities to improve of both technical and economic indicators. The analysis combines measuring and analytical methods with standard cost-benefit analysis. Conclusions are derived from measurements and calculations of key parameters in the operating conditions and checked by experimental methods. Test results deviate from 10 to 15%, in relation with parameters in main production line.

Opportunities for low-grade heat recovery in the UK food processing industry

International Nuclear Information System (INIS)

Law, Richard; Harvey, Adam; Reay, David

2013-01-01

Energy efficiency in the process industry is becoming an increasingly important issue due to the rising costs of both electricity and fossil fuel resources, as well as the tough targets for the reduction in greenhouse gas emissions outlined in the Climate Change Act 2008. Utilisation of waste heat sources is key to improving industrial energy efficiency, with an estimated 11.4 TWh of recoverable heat being wasted each year, a quarter of which is from the food and drinks processing sector. This paper examines the low-grade waste heat sources common to the food and drinks processing sector and the various opportunities for the use of this heat. A review of the best available technologies for recovery of waste heat is provided, ranging from heat transfer between source and sink, to novel technologies for the generation of electricity and refrigeration. Generally, the most economic option for waste heat recovery is heat exchange between nearby/same process source and sink, with a number of well-developed heat exchangers widely available for purchase. More novel options, such as the use of organic Rankine cycles for electricity generation prove to be less economical due to high capital outlays. However, with additional funding provision for demonstration of such projects and development of modular units, such technologies would become more common

Heteromodal conceptual processing in the angular gyrus.

Science.gov (United States)

Bonner, Michael F; Peelle, Jonathan E; Cook, Philip A; Grossman, Murray

2013-05-01

Concepts bind together the features commonly associated with objects and events to form networks in long-term semantic memory. These conceptual networks are the basis of human knowledge and underlie perception, imagination, and the ability to communicate about experiences and the contents of the environment. Although it is often assumed that this distributed semantic information is integrated in higher-level heteromodal association cortices, open questions remain about the role and anatomic basis of heteromodal representations in semantic memory. Here we used combined neuroimaging evidence from functional magnetic resonance imaging (fMRI) and diffusion tensor imaging (DTI) to characterize the cortical networks underlying concept representation. Using a lexical decision task, we examined the processing of concepts in four semantic categories that varied on their sensory-motor feature associations (sight, sound, manipulation, and abstract). We found that the angular gyrus was activated across all categories regardless of their modality-specific feature associations, consistent with a heteromodal account for the angular gyrus. Exploratory analyses suggested that categories with weighted sensory-motor features additionally recruited modality-specific association cortices. Furthermore, DTI tractography identified white matter tracts connecting these regions of modality-specific functional activation with the angular gyrus. These findings are consistent with a distributed semantic network that includes a heteromodal, integrative component in the angular gyrus in combination with sensory-motor feature representations in modality-specific association cortices. Copyright © 2013 Elsevier Inc. All rights reserved.

Application of a conceptual framework for the modelling and execution of clinical guidelines as networks of concurrent processes

NARCIS (Netherlands)

Fung, L.S.N.; Fung, Nick Lik San; Widya, I.A.; Broens, T.H.F.; Larburu Rubio, Nekane; Bults, Richard G.A.; Shalom, Erez; Jones, Valerie M.; Hermens, Hermanus J.

2014-01-01

We present a conceptual framework for modelling clinical guidelines as networks of concurrent processes. This enables the guideline to be partitioned and distributed at run-time across a knowledge-based telemedicine system, which is distributed by definition but whose exact physical configuration

The Effect of Process Oriented Guided Inquiry Learning (POGIL) on 11th Graders' Conceptual Understanding of Electrochemistry

Science.gov (United States)

Sen, Senol; Yilmaz, Ayhan; Geban, Ömer

2016-01-01

The purpose of this study was to investigate the effect of Process Oriented Guided Inquiry Learning (POGIL) method compared to traditional teaching method on 11th grade students' conceptual understanding of electrochemistry concepts. Participants were 115 students from a public school in Turkey. Nonequivalent control group design was used. Two…

Recovery Process of Li, Al and Si from Lepidolite by Leaching with HF

Directory of Open Access Journals (Sweden)

Gustavo D. Rosales

2017-03-01

Full Text Available This work describes the development of a new process for the recovery of Li, Al and Si along with the proposal of a flow sheet for the precipitation of those metals. The developed process is comprised of lepidolite acid digestion with hydrofluoric acid, and the subsequent precipitation of the metals present in the leach liquor. The leaching operational parameters studied were: reaction time, temperature and HF concentration. The experimental results indicate that the optimal conditions to achieve a Li extraction higher than 90% were: solid-liquid ratio, 1.82% (w/v; temperature, 123 °C; HF concentration, 7% (v/v; stirring speed, 330 rpm; and reaction time, 120 min. Al and Si can be recovered as Na3AlF6 and K2SiF6. LiF was separated from the leach liquor during water evaporation, with recovery values of 92%.

Dealing with unexpected events on the flight deck : A conceptual model of startle and surprise

NARCIS (Netherlands)

Landman, H.M.; Groen, E.L.; Paassen, M.M. van; Bronkhorst, A.W.; Mulder, M.

2017-01-01

Objective: A conceptual model is proposed in order to explain pilot performance in surprising and startling situations. Background: Today’s debate around loss of control following in-flight events and the implementation of upset prevention and recovery training has highlighted the importance of

BPMN as a Communication Language for the Process- and Event-Oriented Perspectives in Fact-Oriented Conceptual Models

Science.gov (United States)

Bollen, Peter

In this paper we will show how the OMG specification of BPMN (Business Process Modeling Notation) can be used to model the process- and event-oriented perspectives of an application subject area. We will illustrate how the fact-oriented conceptual models for the information-, process- and event perspectives can be used in a 'bottom-up' approach for creating a BPMN model in combination with other approaches, e.g. the use of a textual description. We will use the common doctor's office example as a running example in this article.

Pore-scale simulation of wettability and interfacial tension effects on flooding process for enhanced oil recovery.

Science.gov (United States)

Zhao, Jin; Wen, Dongsheng

2017-08-27

For enhanced oil recovery (EOR) applications, the oil/water flow characteristics during the flooding process was numerically investigated with the volume-of-fluid method at the pore scale. A two-dimensional pore throat-body connecting structure was established, and four scenarios were simulated in this paper. For oil-saturated pores, the wettability effect on the flooding process was studied; for oil-unsaturated pores, three effects were modelled to investigate the oil/water phase flow behaviors, namely the wettability effect, the interfacial tension (IFT) effect, and the combined wettability/IFT effect. The results show that oil saturated pores with the water-wet state can lead to 25-40% more oil recovery than with the oil-wet state, and the remaining oil mainly stays in the near wall region of the pore bodies for oil-wet saturated pores. For oil-unsaturated pores, the wettability effects on the flooding process can help oil to detach from the pore walls. By decreasing the oil/water interfacial tension and altering the wettability from oil-wet to water-wet state, the remaining oil recovery rate can be enhanced successfully. The wettability-IFT combined effect shows better EOR potential compared with decreasing the interfacial tension alone under the oil-wet condition. The simulation results in this work are consistent with previous experimental and molecular dynamics simulation conclusions. The combination effect of the IFT reducation and wettability alteration can become an important recovery mechanism in future studies for nanoparticles, surfactant, and nanoparticle-surfactant hybrid flooding process.

Energy recovery by pressure retarded osmosis (PRO) in SWRO–PRO integrated processes

KAUST Repository

Wan, Chun Feng

2015-11-11

Pressure retarded osmosis (PRO) is a promising technology to reduce the specific energy consumption of a seawater reverse osmosis (SWRO) plant. In this study, it is projected that 25.6-40.7millionkWh/day of energy can be recovered globally, if the brines from SWRO are used as the draw solution and diluted to the seawater level in a PRO system. Detailed integrated SWRO-PRO processes are developed in this study with the option to form a closed-loop SWRO-PRO process that can substantially reduce the pretreatment cost of desalination. The governing mathematical models that describe both the transport phenomena on a module level and the energy flow on a system level are developed to evaluate the performances of the SWRO-PRO processes. The model aims to investigate the performance of the hollow fibers as dilution occurs and provides guidelines on hollow fiber module design and process operation. Determining the dilution factor and the corresponding operating pressure of PRO is the key to optimize the integrated process. The specific energy consumptions of three SWRO-involved processes; namely, (1) SWRO without a pressure exchanger, (2) SWRO with a pressure exchanger, and (3) SWRO with pressure exchangers and PRO are compared. The results show that the specific energy consumptions for the above three processes are 5.51, 1.79 and 1.08kWh/(m of desalinated water) for a 25% recovery SWRO plant; and 4.13, 2.27 and 1.14kWh/(m of desalinated water) for a 50% recovery SWRO plant, using either freshwater or wastewater as the feed solution in PRO.

Assessment of modularity architecture for recovery process of electric vehicle in supporting sustainable design

Science.gov (United States)

Baroroh, D. K.; Alfiah, D.

2018-05-01

The electric vehicle is one of the innovations to reduce the pollution of the vehicle. Nevertheless, it still has a problem, especially for disposal stage. In supporting product design and development strategy, which is the idea of sustainable design or problem solving of disposal stage, assessment of modularity architecture from electric vehicle in recovery process needs to be done. This research used Design Structure Matrix (DSM) approach to deciding interaction of components and assessment of modularity architecture using the calculation of value from 3 variables, namely Module Independence (MI), Module Similarity (MS), and Modularity for End of Life Stage (MEOL). The result of this research shows that existing design of electric vehicles has the architectural design which has a high value of modularity for recovery process on disposal stage. Accordingly, so it can be reused and recycled in component level or module without disassembly process to support the product that is environmentally friendly (sustainable design) and able reduce disassembly cost.

Applications of thermal energy storage to waste heat recovery in the food processing industry

Science.gov (United States)

Trebilcox, G. J.; Lundberg, W. L.

1981-03-01

The canning segment of the food processing industry is a major energy user within that industry. Most of its energy demand is met by hot water and steam and those fluids, in addition to product cooling water, eventually flow from the processes as warm waste water. To minimize the possibility of product contamination, a large percentage of that waste water is sent directly to factory drains and sewer systems without being recycled and in many cases the thermal energy contained by the waste streams also goes unreclaimed and is lost from further use. Waste heat recovery in canning facilities can be performed economically using systems that employ thermal energy storage (TES). A project was proposed in which a demonstration waste heat recovery system, including a TES feature, would be designed, installed and operated.

Conceptual design of hydrogen isotopes chromatographic separation system with super large capacity

International Nuclear Information System (INIS)

Xie Bo; Weng Kuiping; Liu Yunnu; Hou Jianping

2012-01-01

A super large capacity hydrogen isotopes separation system, including total plan, unit (including making and purification of gas, three-grade chromatographic columns, gas loop and auto-control, and carrier recovery) and experimental scheme, had been designed on the basis of a series of hydrogen-deuterium experiments by temperature programmed de- sorption. The characteristic of the system was that desorption kinetic parameters could be directly calculated from the hydrogen isotope separation desorption spectra information. In other words, the complicated dynamic process of separation could be described by the desorption rate equation, shape parameter and desorption activation energy calculation on the condition of the experimental data and appropriate assumptions (equilibrium and adsorption, uniform surface). In previous work, an experimental series of operation to verify the successive enrichment of D 2 from a H 2 -D 2 mixture, the production of the deuterium from natural hydrogen and the recovery of tritium such as from the nuclear heavy-water were carried out using MS5A at 77 K. This work was only conceptual design, so it was necessary to identify the availability of super large capacity system by experiment. (authors)

Effective sulfur and energy recovery from hydrogen sulfide through incorporating an air-cathode fuel cell into chelated-iron process.

Science.gov (United States)

Sun, Min; Song, Wei; Zhai, Lin-Feng; Cui, Yu-Zhi

2013-12-15

The chelated-iron process is among the most promising techniques for the hydrogen sulfide (H2S) removal due to its double advantage of waste minimization and resource recovery. However, this technology has encountered the problem of chelate degradation which made it difficult to ensure reliable and economical operation. This work aims to develop a novel fuel-cell-assisted chelated-iron process which employs an air-cathode fuel cell for the catalyst regeneration. By using such a process, sulfur and electricity were effectively recovered from H2S and the problem of chelate degradation was well controlled. Experiment on a synthetic sulfide solution showed the fuel-cell-assisted chelated-iron process could maintain high sulfur recovery efficiencies generally above 90.0%. The EDTA was preferable to NTA as the chelating agent for electricity generation, given the Coulombic efficiencies (CEs) of 17.8 ± 0.5% to 75.1 ± 0.5% for the EDTA-chelated process versus 9.6 ± 0.8% to 51.1 ± 2.7% for the NTA-chelated process in the pH range of 4.0-10.0. The Fe (III)/S(2-) ratio exhibited notable influence on the electricity generation, with the CEs improved by more than 25% as the Fe (III)/S(2-) molar ratio increased from 2.5:1 to 3.5:1. Application of this novel process in treating a H2S-containing biogas stream achieved 99% of H2S removal efficiency, 78% of sulfur recovery efficiency, and 78.6% of energy recovery efficiency, suggesting the fuel-cell-assisted chelated-iron process was effective to remove the H2S from gas streams with favorable sulfur and energy recovery efficiencies. Copyright © 2013 Elsevier B.V. All rights reserved.

Conceptual thinking of uneducated adults

Directory of Open Access Journals (Sweden)

Pavlović Zoran

2006-01-01

Full Text Available The starting point of this paper is Vygotsky's thesis that the prerequisite of conceptual thinking and concepts in general is the systematic influence upon the child effectuated by his/her inclusion into the process of education. The aim of this work is to examine characteristics of conceptual thinking of people who have not attended school, by which they have been devoid of formative role of education. Four different methods for examination of conceptual development have been used on the sample consisting of seventeen respondents who have not attended school. The results state that the majority of respondents have not demonstrated that they master the concepts on the highest level of development in none of these four methods. However, some respondents in some tests and some individual tasks within the tests show some characteristics of the high level of the conceptual thinking development.

Investigation of Multiscale and Multiphase Flow, Transport and Reaction in Heavy Oil Recovery Processes

Energy Technology Data Exchange (ETDEWEB)

Yorstos, Yannis C.

2003-03-19

The report describes progress made in the various thrust areas of the project, which include internal drives for oil recovery, vapor-liquid flows, combustion and reaction processes and the flow of fluids with yield stress.

Electrophilic acid gas-reactive fluid, proppant, and process for enhanced fracturing and recovery of energy producing materials

Science.gov (United States)

Fernandez, Carlos A.; Heldebrant, David J.; Bonneville, Alain; Jung, Hun Bok; Carroll, Kenneth C.

2018-01-23

An electrophilic acid gas-reactive fracturing fluid, proppant, and process are detailed. The fluid expands in volume to provide rapid and controlled increases in pressure that enhances fracturing in subterranean bedrock for recovery of energy-producing materials. The proppant stabilizes fracture openings in the bedrock to enhance recovery of energy-producing materials.

Structuring Disaster Recovery Infrastructure Decisions: Lessons from Boulder County's 2013 Flood Recovery

Science.gov (United States)

Clavin, C.; Petropoulos, Z.

2017-12-01

Recovery phase decision making processes, as compared to mitigation and response phase decision making processes, require communities make significant financial and capital decisions in the months after a disaster. Collectively, these investments may significantly contribute to the resilience of a community to future hazards. Pre-disaster administrative decisions are well-established within existing planning processes. Post-event recovery requires community decision makers to quickly evaluate technical proposals and manage significant recovery financial resources to ensure their community rebuilds in a manner that will be more resilient to future events. These technical and administrative hurdles in the aftermath of a disaster create a challenging atmosphere to make sound, scientifically-informed decisions leading to resilient recovery. In September 2013, a 1,000-year rain event that resulted in flooding throughout the Front Range of Colorado, significantly impacting Boulder County. While the event is long past, disaster recovery efforts still continue in parts of Boulder County. Boulder County officials formed a county collaborative that adapted the NIST Community Resilience Planning Guide for Buildings and Infrastructure Systems to facilitate a goals-based multi-criteria decision making process. Rather than use hazard-based information to guide infrastructure design, the county's decision process established time-to-recovery goals for infrastructure systems that were used as criteria for project design. This presentation explores the decision-making process employed by Boulder County to specify design standards for resilient rebuilding of infrastructure systems and examine how this infrastructure planning model could be extrapolated to other situations where there is uncertainty regarding future infrastructure design standards.

Conformational dynamics of Rouse chains during creep/recovery processes: a review

International Nuclear Information System (INIS)

Watanabe, Hiroshi; Inoue, Tadashi

2005-01-01

The Rouse model is a well-established model for non-entangled polymer chains and also serves as a fundamental model for entangled chains. The dynamic behaviour of this model under strain-controlled conditions has been fully analysed in the literature. However, despite the importance of the Rouse model, no analysis has been made so far of the orientational anisotropy of the Rouse eigenmodes during the stress-controlled, creep and recovery processes. For completeness of the analysis of the model, the Rouse equation of motion is solved to calculate this anisotropy for monodisperse chains and their binary blends during the creep/recovery processes. The calculation is simple and straightforward, but the result is intriguing in the sense that each Rouse eigenmode during these processes has a distribution in the retardation times. This behaviour, reflecting the interplay/correlation among the Rouse eigenmodes of different orders (and for different chains in the blends) under the constant stress condition, is quite different from the behaviour under rate-controlled flow (where each eigenmode exhibits retardation/relaxation associated with a single characteristic time). Furthermore, the calculation indicates that the Rouse chains exhibit affine deformation on sudden imposition/removal of the stress and the magnitude of this deformation is inversely proportional to the number of bond vectors per chain. In relation to these results, a difference between the creep and relaxation properties is also discussed for chains obeying multiple relaxation mechanisms (Rouse and reptation mechanisms). (topical review)

Process for gasifying fuels with the recovery of rich gases

Energy Technology Data Exchange (ETDEWEB)

Jahns, F

1921-04-10

A process for gasifying fuels with recovery of water-free, rich-in-tar gases in a ring-gas-producer characterized by hot-gas-stream arising from the gasification bed of a fresh chamber in the known way is divided. One part is conducted through an old chamber, the other part is led first during the drying through the fresh fuel and with the received water-vapor also through the old chamber and then during the carbonization with the carbonization products is led to the carbonization-gas conduit.

Latinos and Latinas in Communal Settings: A Grounded Theory of Recovery

Directory of Open Access Journals (Sweden)

Joseph R. Ferrari

2009-03-01

Full Text Available Semi-structured interviews were conducted with 12 Latino/a residents of a mutual help residential recovery program (Oxford House in order to elicit their experiences of the program’s therapeutic elements. A model of recovery emerged from the analysis including several themes supported by existing literature: personal motivation and readiness to change, mutual help, sober environment, social support, and accountability. Consistent with a broad conceptualization of recovery, outcomes included abstinence, new life skills, and increased self-esteem/sense of purpose. Most participants were the only Latino/a in their Houses; however, cultural differences did not emerge as salient issues. The study’s findings highlight potential therapeutic aspects of mutual-help communal recovery programs and suggest that English-speaking, bicultural Latinos/as have positive experiences and may benefit from participating in these programs.

Revisiting caffeate's capabilities as a complexation agent to silver cation in mining processes by means of the dual descriptor--a conceptual DFT approach.

Science.gov (United States)

Martínez-Araya, Jorge Ignacio

2012-09-01

Caffeic acid (C(9)H(8)O(4)) and its conjugate base C(9)H(7)O(4) (-) (anionic form-known as caffeate) were analyzed computationally through the use of quantum chemistry to assess their intrinsic global and local reactivity using the tools of conceptual density functional theory. The anionic form was found to be better at coordinating the silver cation than caffeic acid thus suggesting the use of caffeate as a complexation agent. The complexation capability of caffeate was compared with that of some of the most common ligand agents used to coordinate silver cations. Local reactivity descriptors allowed identification of the preferred sites on caffeate for silver cation coordination thus generating a plausible silver complex. All silver complexes were analyzed thermodynamically considering interaction energies in both gas and aqueous phases; the complexation free energy in aqueous phase was also determined. These results suggest that more attention be paid to the caffeate anion and its derivatives because this work has shed new light on the behavior of this anion in the recovery of silver cations that could be exploited in silver mining processes in a environmentally friendly way.

Recovery of polyphenols from Pink Guava processing wastes by ultra filtration

International Nuclear Information System (INIS)

Lilis Sukeksi; Che Rosmani Che Hassan; Nik Meriam Sulaiman; Mohamed Kheireddine Aroua

2010-01-01

Full text: Processing of fruits are results in high amounts of waste material that is prone to microbial spoilage and usually represents a problem that is further aggravated by legal restrictions. Polyphenols are a wide variety of compounds that occur in pink guava fruit or others fruits and vegetables. Recovery from pink guava wastes seems to be promising in the case of polyphenols, which are of considerable interest due to their healthy and anti oxidative properties. In this work the performance of commercial tubular PVDF membrane FP 200 with nominal MWCO 200,000, was studied during pretreatment for recovery polyphenols from pink guava processing wastes. The experiments have been carried out at trans-membrane pressure of 0.5 until 2.5 Bar, and all permeate flux significantly decreased with time until a steady-state was established. The steady-state permeates flux reached a maximum at a trans-membrane pressure of about 1 bar. The first results obtained confirm the flux decline at 20 minutes was 35 % of the total flux. Meanwhile concentration of polyphenols at first step reached a steady state after 900 ml of permeate volume (47 %) and the concentration of polyphenols when the permeate volume at VCR = 4 or 3000 ml is 54 %. (author)

Converting the Caetité Mill Process to Enhance Uranium Recovery and Expand Production

Energy Technology Data Exchange (ETDEWEB)

Gomiero, L. A.; Scassiotti Filho, W.; Veras, A., E-mail: gomiero@inb.gov.br [Indústrias Nucleares do Brasil S/A — INB, Caetité, BA (Brazil); Cunha, J. W. [Instituto de Engenharia Nuclear-IEN/CNEN, Rio de Janeiro, RJ (Brazil); Morais, C. A. [Centro do Desenvolvimento da Tec. Nuclear-CDTN/CNEN, Belo Horizonte, MG (Brazil)

2014-05-15

The Caetité uranium mill was commissioned in 2000 to produce about 340 t U per year from an uranium ore averaging 0.29% U{sub 3}O{sub 8}. This production is sufficient to supply the two operating nuclear power plants in the country. As the Brazilian government has recently confirmed its plan to start building another ones from 2009, the uranium production will have to expand its capacity in the next two years. This paper describes the changes in the milling process that are being evaluated in order to not only increase the production but also the uranium recovery, to fulfil the increasing local demand. The heap leaching process will be changed to conventional tank agitated leaching of ground ore slurry in sulphuric acid medium. Batch and pilot plant essays have shown that the uranium recovery can increase from the 77% historical average to about 93%. As the use of sodium chloride as the stripping agent has presented detrimental effects in the extraction and stripping process, two alternatives are being evaluated for the uranium recovery from the PLS: (a) uranium peroxide precipitation at controlled pH from a PLS that was firstly neutralized and filtered. Batch essays have shown good results with a final calcined precipitate averaging 99% U{sub 3}O{sub 8}. Conversely the results obtained at the first pilot plant essay has shown that the precipitation conditions of the continuous process calls for further evaluation. The pilot plant is being improved and another essay will be carried out. (b) uranium extraction with a tertiary amine followed by stripping with concentrated sulphuric acid solution. Efforts are being made to recover the excess sulphuric acid from the pregnant stripping solution to enhance the economic viability of the process and to avoid the formation of a large quantity of gypsum in the pre-neutralization step before the uranium peroxide precipitation. (author)

Recovery of copper and lead from waste printed circuit boards by supercritical water oxidation combined with electrokinetic process

International Nuclear Information System (INIS)

Xiu Furong; Zhang Fushen

2009-01-01

An effective and benign process for copper and lead recovery from waste printed circuit boards (PCBs) was developed. In the process, the PCBs was pre-treated in supercritical water, then subjected to electrokinetic (EK) process. Experimental results showed that supercritical water oxidation (SCWO) process was strong enough to decompose the organic compounds of PCBs, and XRD spectra indicated that copper and lead were oxidized into CuO, Cu 2 O and β-PbO 2 in the process. The optimum SCWO treatment conditions were 60 min, 713 K, 30 MPa, and EK treatment time, constant current density were 11 h, 20 mA cm -2 , respectively. The recovery percentages of copper and lead under optimum SCWO + EK treatment conditions were around 84.2% and 89.4%, respectively. In the optimized EK treatment, 74% of Cu was recovered as a deposit on the cathode with a purity of 97.6%, while Pb was recovered as concentrated solutions in either anode (23.1%) or cathode (66.3%) compartments but little was deposited on the electrodes. It is believed that the process is effective and practical for Cu and Pb recovery from waste electric and electronic equipments.

A Conceptual Model for Assessing Quality of Care for Patients Boarding in the Emergency Department: Structure-Process-Outcome

Science.gov (United States)

Liu, Shan W.; Singer, Sara J.; Sun, Benjamin C.; Camargo, Carlos A.

2013-01-01

Many believe that the “boarding” of emergency department (ED) patients awaiting inpatient beds compromises quality of care. To better study the quality of care of boarded patients, one should identify and understand the mechanisms accounting for any potential differences in care. This paper present a conceptual boarding “structure-process-outcome” model to help assess quality of care provided to boarded patients, and to aid in recognizing potential solutions to improve that quality, if it is deficient. The goal of the conceptual model is to create a practical framework on which a research and policy agenda can be based to measure and improve quality of care for boarded patients. PMID:21496148

IN SITU STEAM ENHANCED RECOVERY PROCESS - HUGHES ENVIRONMENTAL SYSTEMS, INC. - INNOVATIVE TECHNOLOGY EVALUATION REPORT

Science.gov (United States)

This Innovative Technology Evaluation report summarizes the findings of an evaluation of the in situ Steam Enhanced Recovery Process (SERP) operated by Hughes Environmental Systems, Inc. at the Rainbow Disposal facility in Huntington Beach, California. he technology demonstration...

Visualization of the functional recovery process of brain and spinal cord after injury

International Nuclear Information System (INIS)

Isa, Tadashi

2009-01-01

Elucidation of the process of spontaneous functional recovery of central nervous system (CNS) after injury like trauma and stroke is important to develop and conduct the better rehabilitation training to promote the recuperation. Authors have developed a macaque monkey model with an artificial injury of cervical corticospinal tract (CST), where its elaborative motor activity of fingers spontaneously recovers. This paper describes the selective CST injury procedure, its recovery process in finger movement and in CNS images by positron emission tomography (PET), and validation of the obtained images by nerve block. For the injury, CST is cut selectively at monkey's C4/C5 boundary to block the hand motion nerve and to preserve the 2-synapse pathway through the propriospinal neuron, which results in acute loss of grasping a piece of potato food. At 1-3 months after the treatment, the elaborative motor activity of fingers completely recovers. During this recovery period, PET is conducted to trace the brain blood flow change at the upper center of the motion in realizing/grasping food, where the dorsal pathway and cerebellar nuclei are activated at the motion in the untreated animal. At 1-2 months after operation, the blood flow is found increased in the two areas above and the increased area, widened relative to those before operation. At 3 months (at complete functional recovery), the activity in the ipsilateral primary motor area returns to normal level and in the contralateral area, is spread accompanying the increase in the bilateral dorsal premotor and secondary somatosensory areas. Imaging results are validated by nerve block with micro-injection of muscimol into the activated areas during the task motor. Findings are helpful for developing a method to promote the compensation of nervous function after injury. (K.T.)

Gas recovery process

International Nuclear Information System (INIS)

Schmidt, W.B.; Lewis, W.W.; Edmiston, A.; Klauser, G.

1980-01-01

In order to decontaminate a gas stream containing radioactive krypton, a preliminary step of removing oxygen and oxides of nitrogen by catalytic reaction with hydrogen is performed. The gas stream is then passed serially through a drier, a carbon dioxide adsorber and a xenon adsorber to remove sequentially water, CO 2 and xenon therefrom. The gas exiting the xenon adsorber is passed to a krypton recovery plant wherein krypton is concentrated to a first level in a primary distillation column by contact with a reflux liquid in a packed section of the column. The liquid and vapour collecting at the bottom of the column is passed to a separator in which the liquid is separated from the vapour. The liquid is partially evaporated in a vessel to increase concentration thereof and is brought to a concentration of approximately 90 mole % or greater in a second distillation column thereby enabling efficient storage of a radioactive krypton product. (author)

Conceptual Masking: How One Picture Captures Attention from Another Picture.

Science.gov (United States)

Loftus, Geoffrey R.; And Others

1988-01-01

Five experiments studied operations of conceptual masking--the reduction of conceptual memory performance for an initial stimulus when it is followed by a masking picture process. The subjects were 337 undergraduates at the University of Washington (Seattle). Conceptual masking is distinguished from perceptual masking. (TJH)

EFFICIENCY INCREASE OF MASTERING PROCESS OF PHYSICS CONCEPTUAL APPARATUS BY STUDENTS THOUGHT THE INSTRUMENTALITY OF MULTIMEDIA FACILITIES

Directory of Open Access Journals (Sweden)

Olga P. Pinchuk

2010-09-01

Full Text Available The relevance of the article material specified the change of accent in school subjects teaching from the transmission of knowledge to forming of students’ ability and willingness to use this knowledge in the real vital situations. The elements of forming method of students’ conceptual apparatus on the lessons of physics are offered. The process of mastering of scientific knowledge system by students with the use of different working methods with conceptual apparatus of physics is described. Use of multimedia technologies on the different stages of teacher’s activity is studied. The author considers research of possibilities of combination of the free communication with an audience with the use of computer device and co-operation of means of network technologies and telecommunications with an educational purpose to be perspective.

The trees and the forest: mixed methods in the assessment of recovery based interventions' processes and outcomes in mental health.

Science.gov (United States)

Hasson-Ohayon, Ilanit; Roe, David; Yanos, Philip T; Lysaker, Paul H

2016-12-01

Recent developments in mental health have emphasized recovery as an outcome for people with serious mental illness (SMI). Accordingly, several studies have attempted to evaluate the process and outcome of recovery-oriented psychosocial interventions. To review and discuss quantitative and qualitative findings from previous efforts to study the impact of five recovery-oriented interventions: Illness Management and Recovery (IMR), Narrative Enhancement and Cognitive Therapy (NECT), Supported Employment (SE), Supported Socialization (SS), and Family Psychoeducation. Reviewing the literature on studies that examine the effectiveness of these interventions by using both quantitative and qualitative approach. Qualitative findings in these studies augment quantitative findings and at times draw attention to unexpected findings and uniquely illuminate the effects of these interventions on self-reflective processes. There is a need for further exploration of how mixed-methods can be implemented to explore recovery-oriented outcomes. Critical questions regarding the implications of qualitative findings are posed.

PRA and Conceptual Design

Science.gov (United States)

DeMott, Diana; Fuqua, Bryan; Wilson, Paul

2013-01-01

Once a project obtains approval, decision makers have to consider a variety of alternative paths for completing the project and meeting the project objectives. How decisions are made involves a variety of elements including: cost, experience, current technology, ideologies, politics, future needs and desires, capabilities, manpower, timing, available information, and for many ventures management needs to assess the elements of risk versus reward. The use of high level Probabilistic Risk Assessment (PRA) Models during conceptual design phases provides management with additional information during the decision making process regarding the risk potential for proposed operations and design prototypes. The methodology can be used as a tool to: 1) allow trade studies to compare alternatives based on risk, 2) determine which elements (equipment, process or operational parameters) drives the risk, and 3) provide information to mitigate or eliminate risks early in the conceptual design to lower costs. Creating system models using conceptual design proposals and generic key systems based on what is known today can provide an understanding of the magnitudes of proposed systems and operational risks and facilitates trade study comparisons early in the decision making process. Identifying the "best" way to achieve the desired results is difficult, and generally occurs based on limited information. PRA provides a tool for decision makers to explore how some decisions will affect risk before the project is committed to that path, which can ultimately save time and money.

Selective recovery of pure copper nanopowder from indium-tin-oxide etching wastewater by various wet chemical reduction process: Understanding their chemistry and comparisons of sustainable valorization processes

Energy Technology Data Exchange (ETDEWEB)

Swain, Basudev, E-mail: swain@iae.re.kr [Institute for Advanced Engineering, Advanced Materials & Processing Center, Yongin, 449-863 (Korea, Republic of); Mishra, Chinmayee [Institute for Advanced Engineering, Advanced Materials & Processing Center, Yongin, 449-863 (Korea, Republic of); Hong, Hyun Seon [Sungshin University, Dept. of Interdisciplinary ECO Science, Seoul, 142-732 (Korea, Republic of); Cho, Sung-Soo [Institute for Advanced Engineering, Advanced Materials & Processing Center, Yongin, 449-863 (Korea, Republic of)

2016-05-15

Sustainable valorization processes for selective recovery of pure copper nanopowder from Indium-Tin-Oxide (ITO) etching wastewater by various wet chemical reduction processes, their chemistry has been investigated and compared. After the indium recovery by solvent extraction from ITO etching wastewater, the same is also an environmental challenge, needs to be treated before disposal. After the indium recovery, ITO etching wastewater contains 6.11 kg/m{sup 3} of copper and 1.35 kg/m{sup 3} of aluminum, pH of the solution is very low converging to 0 and contain a significant amount of chlorine in the media. In this study, pure copper nanopowder was recovered using various reducing reagents by wet chemical reduction and characterized. Different reducing agents like a metallic, an inorganic acid and an organic acid were used to understand reduction behavior of copper in the presence of aluminum in a strong chloride medium of the ITO etching wastewater. The effect of a polymer surfactant Polyvinylpyrrolidone (PVP), which was included to prevent aggregation, to provide dispersion stability and control the size of copper nanopowder was investigated and compared. The developed copper nanopowder recovery techniques are techno-economical feasible processes for commercial production of copper nanopowder in the range of 100–500 nm size from the reported facilities through a one-pot synthesis. By all the process reported pure copper nanopowder can be recovered with>99% efficiency. After the copper recovery, copper concentration in the wastewater reduced to acceptable limit recommended by WHO for wastewater disposal. The process is not only beneficial for recycling of copper, but also helps to address environment challenged posed by ITO etching wastewater. From a complex wastewater, synthesis of pure copper nanopowder using various wet chemical reduction route and their comparison is the novelty of this recovery process. - Highlights: • From the Indium-Tin-Oxide etching

Selective recovery of pure copper nanopowder from indium-tin-oxide etching wastewater by various wet chemical reduction process: Understanding their chemistry and comparisons of sustainable valorization processes

International Nuclear Information System (INIS)

Swain, Basudev; Mishra, Chinmayee; Hong, Hyun Seon; Cho, Sung-Soo

2016-01-01

Sustainable valorization processes for selective recovery of pure copper nanopowder from Indium-Tin-Oxide (ITO) etching wastewater by various wet chemical reduction processes, their chemistry has been investigated and compared. After the indium recovery by solvent extraction from ITO etching wastewater, the same is also an environmental challenge, needs to be treated before disposal. After the indium recovery, ITO etching wastewater contains 6.11 kg/m 3 of copper and 1.35 kg/m 3 of aluminum, pH of the solution is very low converging to 0 and contain a significant amount of chlorine in the media. In this study, pure copper nanopowder was recovered using various reducing reagents by wet chemical reduction and characterized. Different reducing agents like a metallic, an inorganic acid and an organic acid were used to understand reduction behavior of copper in the presence of aluminum in a strong chloride medium of the ITO etching wastewater. The effect of a polymer surfactant Polyvinylpyrrolidone (PVP), which was included to prevent aggregation, to provide dispersion stability and control the size of copper nanopowder was investigated and compared. The developed copper nanopowder recovery techniques are techno-economical feasible processes for commercial production of copper nanopowder in the range of 100–500 nm size from the reported facilities through a one-pot synthesis. By all the process reported pure copper nanopowder can be recovered with>99% efficiency. After the copper recovery, copper concentration in the wastewater reduced to acceptable limit recommended by WHO for wastewater disposal. The process is not only beneficial for recycling of copper, but also helps to address environment challenged posed by ITO etching wastewater. From a complex wastewater, synthesis of pure copper nanopowder using various wet chemical reduction route and their comparison is the novelty of this recovery process. - Highlights: • From the Indium-Tin-Oxide etching wastewater

Conceptualizing Telehealth in Nursing Practice: Advancing a Conceptual Model to Fill a Virtual Gap.

Science.gov (United States)

Nagel, Daniel A; Penner, Jamie L

2016-03-01

Increasingly nurses use various telehealth technologies to deliver health care services; however, there has been a lag in research and generation of empirical knowledge to support nursing practice in this expanding field. One challenge to generating knowledge is a gap in development of a comprehensive conceptual model or theoretical framework to illustrate relationships of concepts and phenomena inherent to adoption of a broad range of telehealth technologies to holistic nursing practice. A review of the literature revealed eight published conceptual models, theoretical frameworks, or similar entities applicable to nursing practice. Many of these models focus exclusively on use of telephones and four were generated from qualitative studies, but none comprehensively reflect complexities of bridging nursing process and elements of nursing practice into use of telehealth. The purpose of this article is to present a review of existing conceptual models and frameworks, discuss predominant themes and features of these models, and present a comprehensive conceptual model for telehealth nursing practice synthesized from this literature for consideration and further development. This conceptual model illustrates characteristics of, and relationships between, dimensions of telehealth practice to guide research and knowledge development in provision of holistic person-centered care delivery to individuals by nurses through telehealth technologies. © The Author(s) 2015.

Conceptual knowledge in the interpretation of idioms.

Science.gov (United States)

Nayak, N P; Gibbs, R W

1990-09-01

The authors examined how people determine the contextual appropriateness of idioms. In Experiment 1, idioms referring to the same temporal stage of a conceptual prototype were judged to be more similar in meaning than idioms referring to different temporal stages. In Experiment 2, idioms in a prototypical temporal sequence were more meaningful than idioms in sentences that violated the temporal sequence. In Experiment 3, idioms referring to the same stage of a conceptual prototype were differentiable on the basis of conceptual information. The conceptual coherence between idioms and contexts facilitated the processing speed of idioms in Experiment 4. Experiment 5 showed that speakers can recover the underlying conceptual metaphors that link an idiom to its figurative meaning. Experiment 6 showed that the metaphoric information reflected in the lexical makeup of idioms also determined the metaphoric appropriateness of idioms in certain contexts.

Conceptual model and evaluation of generated power and emissions in an IGCC plant

International Nuclear Information System (INIS)

Perez-Fortes, M.; Bojarski, A.D.; Velo, E.; Nougues, J.M.; Puigjaner, L.

2009-01-01

This work develops a design and operation support tool for an Integrated Gasification Combined Cycle (IGCC) power plant, which allows the efficiency and environmental issues of alternative process designs and feedstock to be assessed. The study is based on a conceptual model of an IGCC plant, validated with data from the ELCOGAS power plant in Spain. The layout of the model includes an Air Separation Unit (ASU), a Pressurized Entrained Flow (PRENFLO) gasifier, a series of purification gas units (venturi scrubber, sour water steam stripper, COS hydrolysis reactor, MDEA absorber columns and a sulphur recovery Claus plant), a Heat Recovery Steam Generator (HRSG) and a Combined Cycle (CC) system. It comprises steady state models. One of the purposes of this work is to analyze the feasibility of coal co-gasification using waste materials; specifically petcoke and olive pomace (orujillo) are considered here. The model has been developed in Aspen Hysys. It uses electrolyte models that have been implemented in Aspen Plus which are connected to Aspen Hysys by means of Artificial Neural Networks (ANNs) models. Results of the model's, gas composition and generated power, are in agreement with the industrial data.

Conceptual model and evaluation of generated power and emissions in an IGCC plant

Energy Technology Data Exchange (ETDEWEB)

Perez-Fortes, M.; Bojarski, A. D.; Velo, E.; Nougues, J. M. [Department of Chemical Engineering, Universitat Politecnica de Catalunya, ETSEIB, Avda. Diagonal, 647, E-08028 Barcelona (Spain); Puigjaner, L., E-mail: luis.puigjaner@upc.edu [Department of Chemical Engineering, Universitat Politecnica de Catalunya, ETSEIB, Avda. Diagonal, 647, E-08028 Barcelona (Spain)

2009-10-15

This work develops a design and operation support tool for an Integrated Gasification Combined Cycle (IGCC) power plant, which allows the efficiency and environmental issues of alternative process designs and feedstock to be assessed. The study is based on a conceptual model of an IGCC plant, validated with data from the ELCOGAS power plant in Spain. The layout of the model includes an Air Separation Unit (ASU), a Pressurized Entrained Flow (PRENFLO) gasifier, a series of purification gas units (venturi scrubber, sour water steam stripper, COS hydrolysis reactor, MDEA absorber columns and a sulphur recovery Claus plant), a Heat Recovery Steam Generator (HRSG) and a Combined Cycle (CC) system. It comprises steady state models. One of the purposes of this work is to analyze the feasibility of coal co-gasification using waste materials; specifically petcoke and olive pomace (orujillo) are considered here. The model has been developed in Aspen Hysys. It uses electrolyte models that have been implemented in Aspen Plus which are connected to Aspen Hysys by means of Artificial Neural Networks (ANNs) models. Results of the model's, gas composition and generated power, are in agreement with the industrial data.

Conceptual model and evaluation of generated power and emissions in an IGCC plant

Energy Technology Data Exchange (ETDEWEB)

Perez-Fortes, M; Bojarski, A D; Velo, E; Nougues, J M; Puigjaner, L [Department of Chemical Engineering, Universitat Politecnica de Catalunya, ETSEIB, Avda. Diagonal, 647, E-08028 Barcelona (Spain)

2009-10-15

This work develops a design and operation support tool for an Integrated Gasification Combined Cycle (IGCC) power plant, which allows the efficiency and environmental issues of alternative process designs and feedstock to be assessed. The study is based on a conceptual model of an IGCC plant, validated with data from the ELCOGAS power plant in Spain. The layout of the model includes an Air Separation Unit (ASU), a Pressurized Entrained Flow (PRENFLO) gasifier, a series of purification gas units (venturi scrubber, sour water steam stripper, COS hydrolysis reactor, MDEA absorber columns and a sulphur recovery Claus plant), a Heat Recovery Steam Generator (HRSG) and a Combined Cycle (CC) system. It comprises steady state models. One of the purposes of this work is to analyze the feasibility of coal co-gasification using waste materials; specifically petcoke and olive pomace (orujillo) are considered here. The model has been developed in Aspen Hysys. It uses electrolyte models that have been implemented in Aspen Plus which are connected to Aspen Hysys by means of Artificial Neural Networks (ANNs) models. Results of the model's, gas composition and generated power, are in agreement with the industrial data. (author)

Conceptual model and evaluation of generated power and emissions in an IGCC plant

Energy Technology Data Exchange (ETDEWEB)

Perez-Fortes, M.; Bojarski, A.D.; Velo, E.; Nougues, J.M.; Puigjaner, L. [Department of Chemical Engineering, Universitat Politecnica de Catalunya, ETSEIB, Avda. Diagonal, 647, E-08028 Barcelona (Spain)

2009-10-15

This work develops a design and operation support tool for an Integrated Gasification Combined Cycle (IGCC) power plant, which allows the efficiency and environmental issues of alternative process designs and feedstock to be assessed. The study is based on a conceptual model of an IGCC plant, validated with data from the ELCOGAS power plant in Spain. The layout of the model includes an Air Separation Unit (ASU), a Pressurized Entrained Flow (PRENFLO) gasifier, a series of purification gas units (venturi scrubber, sour water steam stripper, COS hydrolysis reactor, MDEA absorber columns and a sulphur recovery Claus plant), a Heat Recovery Steam Generator (HRSG) and a Combined Cycle (CC) system. It comprises steady state models. One of the purposes of this work is to analyze the feasibility of coal co-gasification using waste materials; specifically petcoke and olive pomace (orujillo) are considered here. The model has been developed in Aspen Hysys. It uses electrolyte models that have been implemented in Aspen Plus which are connected to Aspen Hysys by means of Artificial Neural Networks (ANNs) models. Results of the model's, gas composition and generated power, are in agreement with the industrial data. (author)

An Ontology-Based Conceptual Model For Accumulating And Reusing Knowledge In A DMAIC Process

Science.gov (United States)

Nguyen, ThanhDat; Kifor, Claudiu Vasile

2015-09-01

DMAIC (Define, Measure, Analyze, Improve, and Control) is an important process used to enhance quality of processes basing on knowledge. However, it is difficult to access DMAIC knowledge. Conventional approaches meet a problem arising from structuring and reusing DMAIC knowledge. The main reason is that DMAIC knowledge is not represented and organized systematically. In this article, we overcome the problem basing on a conceptual model that is a combination of DMAIC process, knowledge management, and Ontology engineering. The main idea of our model is to utilizing Ontologies to represent knowledge generated by each of DMAIC phases. We build five different knowledge bases for storing all knowledge of DMAIC phases with the support of necessary tools and appropriate techniques in Information Technology area. Consequently, these knowledge bases provide knowledge available to experts, managers, and web users during or after DMAIC execution in order to share and reuse existing knowledge.

Conceptual design of the alcohol waste treatment equipment

International Nuclear Information System (INIS)

Fujisawa, Morio; Nitta, Kazuhiko; Morita, Yasuhiro; Nakada, Eiju

2001-01-01

This report describes the result of Conceptual Design of the Alcohol Waste Treatment Equipment. The experimental fast Reactor, JOYO, saves the radioactive alcohol waste at storage tank. As this alcohol waste is not able to treat with existing equipment, it is stored about 5 m 3 . And the amount of this is increasing every year. So it is necessary to treat the alcohol waste by chemical resolution for example. On account of this, the investigative test about filtration and dialyzer, and conceptual design about catalyst oxidation process, which is composed from head end process to resolution, are done. The results of investigation show as follows. 1. Investigative Test about filtration and dialyzer. (1) The electric conduction is suitable for the judgement of alkyl sodium hydrolysis Alkyl sodium hydrolysis is completed below 39% alcohol concentration. (2) The microfiltration is likely to separate the solid in alcohol waste. (3) From laboratory test, the electrodialyzer is effective for sodium separation in alcohol waste. And sodium remove rate, 96-99%, is confirmed. 2. Conceptual Design. The candidate process is as follows. (1) The head end process is electrodialyzer, and chemical resolution process is catalyst oxidation. (2) The head end process is not installed, and chemical resolution process is catalyst oxidation. (3) The head end process is electrodialyzer, and alcohol extracted by pervaporation. In this Conceptual Design, as far these process, the components, treatment ability, properties of waste, chemical mass balance, safety for fire and explosion, and the plot plan are investigated. As a result, remodeling the existing facility into catalyst oxidation process is effective to treat the alcohol waste, and treatment ability is about 1.25 l/h. (author)

Optimization of induced crystallization reaction in a novel process of nutrients removal coupled with phosphorus recovery from domestic wastewater

Directory of Open Access Journals (Sweden)

Zou Haiming

2017-12-01

Full Text Available Phosphorus removal and recovery from domestic wastewater is urgent nowadays. A novel process of nutrients removal coupled with phosphorus recovery from domestic sewage was proposed and optimization of induced crystallization reaction was performed in this study. The results showed that 92.3% of phosphorus recovery via induced Hydroxyapatite crystallization was achieved at the optimum process parameters: reaction time of 80 min, seed crystal loads of 60 g/L, pH of 8.5, Ca/P mole ratio of 2.0 and 4.0 L/min aeration rate when the PO43--P concentration was 10 mg/L in the influent, displaying an excellent phosphorus recovery performance. Importantly, it was found that the effect of reaction temperature on induced Hydroxyapatite crystallization was slight, thus favoring practical application of phosphorus recovery method described in this study. From these results, the proposed method of induced HAP crystallization to recover phosphorus combined with nutrients removal can be an economical and effective technology, probably favoring the water pollution control and phosphate rock recycle.

Satellite-Based Evaluation of the Post-Fire Recovery Process from the Worst Forest Fire Case in South Korea

Directory of Open Access Journals (Sweden)

Jae-Hyun Ryu

2018-06-01

Full Text Available The worst forest fire in South Korea occurred in April 2000 on the eastern coast. Forest recovery works were conducted until 2005, and the forest has been monitored since the fire. Remote sensing techniques have been used to detect the burned areas and to evaluate the recovery-time point of the post-fire processes during the past 18 years. We used three indices, Normalized Burn Ratio (NBR, Normalized Difference Vegetation Index (NDVI, and Gross Primary Production (GPP, to temporally monitor a burned area in terms of its moisture condition, vegetation biomass, and photosynthetic activity, respectively. The change of those three indices by forest recovery processes was relatively analyzed using an unburned reference area. The selected unburned area had similar characteristics to the burned area prior to the forest fire. The temporal patterns of NBR and NDVI, not only showed the forest recovery process as a result of forest management, but also statistically distinguished the recovery periods at the regions of low, moderate, and high fire severity. The NBR2.1 for all areas, calculated using 2.1 μm wavelengths, reached the unburned state in 2008. The NDVI for areas with low and moderate fire severity levels became significantly equal to the unburned state in 2009 (p > 0.05, but areas with high severity levels did not reach the unburned state until 2017. This indicated that the surface and vegetation moisture conditions recovered to the unburned state about 8 years after the fire event, while vegetation biomass and health required a longer time to recover, particularly for high severity regions. In the case of GPP, it rapidly recovered after about 3 years. Then, the steady increase in GPP surpassed the GPP of the reference area in 2015 because of the rapid growth and high photosynthetic activity of young forests. Therefore, the concluding scientific message is that, because the recovery-time point for each component of the forest ecosystem is

Implementing program-wide awareness about recovery in a large mental health and addictions program.

Science.gov (United States)

McVanel-Viney, Sarah; Younger, Jodi; Doyle, Winnie; Kirkpatrick, Helen

2006-01-01

St. Joseph's Healthcare Hamilton conceptualized a multi-step plan for implementing a recovery oriented service delivery approach within their Mental Health and Addictions Program. This brief report discusses the first phase of this plan which included building awareness of recovery utilizing Anthony's (2000) system standards to develop a needs assessment for managers and senior team members. The survey had three purposes: to increase managers' awareness about recovery; to allow managers to express concerns that they had with this paradigm; and to afford managers an opportunity to explore the ways in which their service was and was not operating in a recovery oriented way. Initiatives designed to build awareness throughout the program are discussed.

Using a systematic conceptual model for a process evaluation of a middle school obesity risk-reduction nutrition curriculum intervention: choice, control & change.

Science.gov (United States)

Lee, Heewon; Contento, Isobel R; Koch, Pamela

2013-03-01

To use and review a conceptual model of process evaluation and to examine the implementation of a nutrition education curriculum, Choice, Control & Change, designed to promote dietary and physical activity behaviors that reduce obesity risk. A process evaluation study based on a systematic conceptual model. Five middle schools in New York City. Five hundred sixty-two students in 20 classes and their science teachers (n = 8). Based on the model, teacher professional development, teacher implementation, and student reception were evaluated. Also measured were teacher characteristics, teachers' curriculum evaluation, and satisfaction with teaching the curriculum. Descriptive statistics and Spearman ρ correlation for quantitative analysis and content analysis for qualitative data were used. Mean score of the teacher professional development evaluation was 4.75 on a 5-point scale. Average teacher implementation rate was 73%, and the student reception rate was 69%. Ongoing teacher support was highly valued by teachers. Teacher satisfaction with teaching the curriculum was highly correlated with student satisfaction (P Teacher perception of amount of student work was negatively correlated with implementation and with student satisfaction (P < .05). Use of a systematic conceptual model and comprehensive process measures improves understanding of the implementation process and helps educators to better implement interventions as designed. Copyright © 2013 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Providing Context for Complexity: Using Infographics and Conceptual Models to Teach Global Change Processes

Science.gov (United States)

Bean, J. R.; White, L. D.

2015-12-01

Understanding modern and historical global changes requires interdisciplinary knowledge of the physical and life sciences. The Understanding Global Change website from the UC Museum of Paleontology will use a focal infographic that unifies diverse content often taught in separate K-12 science units. This visualization tool provides scientists with a structure for presenting research within the broad context of global change, and supports educators with a framework for teaching and assessing student understanding of complex global change processes. This new approach to teaching the science of global change is currently being piloted and refined based on feedback from educators and scientists in anticipation of a 2016 website launch. Global change concepts are categorized within the infographic as causes of global change (e.g., burning of fossil fuels, volcanism), ongoing Earth system processes (e.g., ocean circulation, the greenhouse effect), and the changes scientists measure in Earth's physical and biological systems (e.g., temperature, extinctions/radiations). The infographic will appear on all website content pages and provides a template for the creation of flowcharts, which are conceptual models that allow teachers and students to visualize the interdependencies and feedbacks among processes in the atmosphere, hydrosphere, biosphere, and geosphere. The development of this resource is timely given that the newly adopted Next Generation Science Standards emphasize cross-cutting concepts, including model building, and Earth system science. Flowchart activities will be available on the website to scaffold inquiry-based lessons, determine student preconceptions, and assess student content knowledge. The infographic has already served as a learning and evaluation tool during professional development workshops at UC Berkeley, Stanford University, and the Smithsonian National Museum of Natural History. At these workshops, scientists and educators used the infographic

Waste water processing technology for Space Station Freedom - Comparative test data analysis

Science.gov (United States)

Miernik, Janie H.; Shah, Burt H.; Mcgriff, Cindy F.

1991-01-01

Comparative tests were conducted to choose the optimum technology for waste water processing on SSF. A thermoelectric integrated membrane evaporation (TIMES) subsystem and a vapor compression distillation subsystem (VCD) were built and tested to compare urine processing capability. Water quality, performance, and specific energy were compared for conceptual designs intended to function as part of the water recovery and management system of SSF. The VCD is considered the most mature and efficient technology and was selected to replace the TIMES as the baseline urine processor for SSF.

Potential for uranium recovery at Nolans

International Nuclear Information System (INIS)

Soldenhoff, K.; Ho, E.

2007-01-01

The concentration of uranium in Nolans is higher than is typical of phosphate rock deposits worldwide. This requires appropriate management of the radioactivity during ore processing, but also provides an opportunity for recovery of uranium as a by-product. The recovery must be integrated into the rare earth process, which is the primary focus of the project. Furthermore, the separation of rare earths from the phosphate matrix and the recovery of phosphoric acid or other fertiliser products is also an important consideration. This paper discusses the various process options that are being considered for the development of a process for Nolans that integrates the recovery of phosphate values and uranium as by-products or rare earth processing

Level conceptual change pre-service elementary teachers on electric current conceptions through visual multimedia supported conceptual change

Science.gov (United States)

Hermita, N.; Suhandi, A.; Syaodih, E.; Samsudin, A.; Marhadi, H.; Sapriadil, S.; Zaenudin, Z.; Rochman, C.; Mansur, M.; Wibowo, F. C.

2018-05-01

Now a day, conceptual change is the most valuable issues in the science education perspective, especially in the elementary education. Researchers have already dialed with the aim of the research to increase level conceptual change process on the electric conceptions through Visual Multimedia Supported Conceptual Change Text (VMMSCCText). We have ever utilized research and development method namely 3D-1I stands for Define, Design, Development, and Implementation. The 27 pre-service elementary teachers were involved in the research. The battery function in circuit electric conception is the futuristic concept which should have been learned by the students. Moreover, the data which was collected reports that static about 0%, disorientation about 0%, reconstruction about 55.6%, and construction about 25.9%. It can be concluded that the implementation of VMMSCCText to pre-service elementary teachers are increased to level conceptual change categories.

Levels-of-processing effects on recollection and familiarity during transient global amnesia and after recovery.

Science.gov (United States)

Thoma, Patrizia; Schwarz, Michael; Daum, Irene

2010-11-01

The aim of the present study was to investigate the pattern of recollection and familiarity deficits and the modulation of recognition memory performance by the depth of encoding (deep vs. shallow) in transient global amnesia (TGA). Ten patients with TGA and 11 control subjects were assessed during the acute stage and after recovery 7 to 19 days later. Both recollection and familiarity were impaired in the acute stage and showed significant, albeit not complete, recovery by the time of the postacute assessment. The patients did, however, show a significant levels-of-processing effect, which was significantly reduced in acute TGA, but not at follow-up. The significant levels-of-processing effect during acute TGA might be linked to recruitment of the prefrontal cortex. (c) 2010 APA, all rights reserved

Microarray-based analysis of the lung recovery process after stainless-steel welding fume exposure in Sprague-Dawley rats.

Science.gov (United States)

Oh, Jung-Hwa; Yang, Mi-jin; Yang, Young-Su; Park, Han-Jin; Heo, Sun Hee; Lee, Eun-Hee; Song, Chang-Woo; Yoon, Seokjoo

2009-02-01

Repeated exposure to welding fumes promotes a reversible increase in pulmonary disease risk, but the molecular mechanisms by which welding fumes induce lung injury and how the lung recovers from such insults are unclear. In the present study, pulmonary function and gene-expression profiles in the lung were analyzed by Affymetrix GeneChip microarray after 30 days of consecutive exposure to manual metal arc welding combined with stainless-steel (MMA-SS) welding fumes, and again after 30 days of recovery from MMA-SS fume exposure. In total, 577 genes were identified as being either up-regulated or down-regulated (over twofold changes, p process of the lung were up-regulated exclusively in the recovery group. Collectively, these data may help elucidate the molecular mechanism of the recovery process of the lung after welding fume exposure.

Genetic control over the processes of postirradiation recovery of a compact chromosome in micrococcus radiodurans

International Nuclear Information System (INIS)

Kudryashova, N.Yu.; Groshev, V.V.; Shestakov, S.V.

1984-01-01

X-irradiation of Micrococcus radiodurans cells with sublethal doses caused disturbances in the structure of a membrane-bound compact chromosome. Recovery of the compact chromosome occurred during the postirradiation incubation of the wild type cells and cells of the UVS-17 mutant deficient in DNA-polymerase. This process was blocked in cells of rec-30 mutant with the impaired system of genetic recombination: this is indicative of an important role played by rec-30 gene product in the postirradiation recovery of the compact chromosome in M. radiodurans cells

Interior design conceptual basis

CERN Document Server

Sully, Anthony

2015-01-01

Maximizing reader insights into interior design as a conceptual way of thinking, which is about ideas and how they are formulated. The major themes of this book are the seven concepts of planning, circulation, 3D, construction, materials, colour and lighting, which covers the entire spectrum of a designer’s activity. Analysing design concepts from the view of the range of possibilities that the designer can examine and eventually decide by choice and conclusive belief the appropriate course of action to take in forming that particular concept, the formation and implementation of these concepts is taken in this book to aid the designer in his/her professional task of completing a design proposal to the client. The purpose of this book is to prepare designers to focus on each concept independently as much as possible, whilst acknowledging relative connections without unwarranted influences unfairly dictating a conceptual bias, and is about that part of the design process called conceptual analysis. It is assu...

Process of recovery and reuse of the washing liquids from filters

International Nuclear Information System (INIS)

Flynn, G.C.

1975-01-01

The present invention relates to a backflush procedure intended for a repeated recovery and reuse of the liquid used for washing a 'pre-layer' filter. This type of filter is used for purifying the water of the steam generator circuit in electric energy generating plants equipped with steam turbines. Said 'pre-layer' filter can also be applied in the auxiliary facilities of electric energy generating plants, especially for treating the fuel ponds in nuclear reactors and for radioactive waste processing [fr

STIMULI-RESPONSIVE POLYMERS WITH ENHANCED EFFICIENCY IN RESERVOIR RECOVERY PROCESSES

Energy Technology Data Exchange (ETDEWEB)

Charles McCormick; Roger Hester

2004-09-30

This sixth and final progress report for DOE Award Number DE-FC26-01BC15317 describes research during the period March 01, 2004 through August 31, 2004 performed at the University of Southern Mississippi on ''Stimuli Responsive Polymers with Enhanced Efficiency in Reservoir Recovery'' processes. Significantly, terpolymers that are responsive to changes in pH and ionic strength have been synthesized, characterized, and their solution properties have been extensively examined. Terpolymers composed of acrylamide, a carboxylated acrylamido monomer (AMBA), and a quaternary ammonium monomer (AMBATAC) with balanced compositions of the latter two, exhibit increases in aqueous solution viscosity as NaCl concentration is increased. This increase in polymer coil size can be expected upon injection of this type of polymer into oil reservoirs of moderate-to-high salinity, leading to better mobility control. The opposite effect (loss of viscosity) is observed for conventional polymer systems. Additionally polymer mobility characteristics have been conducted for a number of hydrophilic copolymers utilizing an extensional flow apparatus and size exclusion chromatography. This study reveled that oil recovery enhancement through use of polymers in a water flood is due to the polymer's resistance to deformation as it flows through the reservoir. Individual polymers when in aqueous solution form coils. The larger the polymer's coil size, the greater the polymer's resistance to extensional flow and the more effective the polymer is in enhancing oil recovery. Large coil sizes are obtained by increasing the polymer molecular weight and having macromolecular structures that favor greater swelling of the coil by the aqueous solvent conditions (temperature, pH and electrolyte concentration) existing in the reservoir.

NWTS conceptual reference repository description (CRRD). Volume 1. Summary

International Nuclear Information System (INIS)

1981-05-01

This report is a Conceptual Reference Repository Description (CRRD) for the terminal storage of spent, unreprocessed fuel assemblies and low-level transuranic waste. It is based on the following three previously prepared conceptual design reports: National Waste Terminal Storage in a Bedded Salt Formation for Spent Unreprocessed Fuel (NWTS-R2), prepared by Kaiser Engineers; National Waste Terminal Storage Repository Number 1 (NWTS-R1), prepared by Stearns-Roger; Spent Fuel Receiving and Packaging Facility Conceptual Design, prepared by Rockwell Hanford Operations and Kaiser Engineers. The CRRD is not itself a conceptual design report, but combines the key features of the above three reports into a description of a reference repository. This description is to be used as a basis for the preparation of a preliminary information report for the repositories. The CRRD discusses from a conceptual engineering standpoint the structures, systems, equipment, and operations necessary to (1) receive unreprocessed spent fuel assemblies via standard shipping casks, (2) offload these assemblies, (3) place the assemblies in canisters, (4) transport the canisters to underground storage locations in the salt dome, and (5) place these canisters in terminal storage. The CRRD also elaborates on the concepts for the retrieval and recovery of the spent fuel after burial; describes the development of the shafts and the underground areas,as well as the supporting operational utility and administrative features of the repository; and discusses the impacts on the reference repository of (1) changes in the waste package concept, (2) dry receiving and dry temporary storage of waste, (3) terminal storage of reprocessing waste, and (4) alternative underground development schemes

Uncertainty in Population Estimates for Endangered Animals and Improving the Recovery Process

Directory of Open Access Journals (Sweden)

Janet L. Rachlow

2013-08-01

Full Text Available United States recovery plans contain biological information for a species listed under the Endangered Species Act and specify recovery criteria to provide basis for species recovery. The objective of our study was to evaluate whether recovery plans provide uncertainty (e.g., variance with estimates of population size. We reviewed all finalized recovery plans for listed terrestrial vertebrate species to record the following data: (1 if a current population size was given, (2 if a measure of uncertainty or variance was associated with current estimates of population size and (3 if population size was stipulated for recovery. We found that 59% of completed recovery plans specified a current population size, 14.5% specified a variance for the current population size estimate and 43% specified population size as a recovery criterion. More recent recovery plans reported more estimates of current population size, uncertainty and population size as a recovery criterion. Also, bird and mammal recovery plans reported more estimates of population size and uncertainty compared to reptiles and amphibians. We suggest the use of calculating minimum detectable differences to improve confidence when delisting endangered animals and we identified incentives for individuals to get involved in recovery planning to improve access to quantitative data.

Autism, "recovery (to normalcy)", and the politics of hope.

Science.gov (United States)

Broderick, Alicia A

2009-08-01

This article draws on the traditions of critical discourse analysis (N. Fairclough, 1995, 2001; M. Foucault, 1972, 1980; J. P. Gee, 1999) in critically examining the discursive formation of "recovery" from autism in applied behavioral analysis (ABA) discourse and its relationship to constructs of hope. Constituted principally in the work of O. I. Lovaas (1987) and C. Maurice (1993), and central to ABA discourse on recovery, has been the construction of a particular vision of hope that has at least 2 integral conceptual elements: (a) Hope for recovery within ABA discourse is constructed in binary opposition to hopelessness, and (b) recovery within ABA discourse is discursively constructed as "recovery (to normalcy)." The author analyzes these 2 pivotal ABA texts within the context of an analysis of other uses of the term recovery in broader bodies of literature: (a) within prior autism-related literature, particularly autobiography, and (b) within literature emanating from the psychiatric survivors' movement. If, indeed, visions of hope inform educational policy and decision making, this analysis addresses S. Danforth's (1997) cogent query, "On what basis hope?", and asserts that moral and political commitments should be central sources of visions of hope and, therefore, inform educational policy and decision making for young children with labels of autism.

Work stress, poor recovery and burnout in teachers.

Science.gov (United States)

Gluschkoff, K; Elovainio, M; Kinnunen, U; Mullola, S; Hintsanen, M; Keltikangas-Järvinen, L; Hintsa, T

2016-10-01

Both work stress and poor recovery have been shown to contribute to the development of burnout. However, the role of recovery as a mediating mechanism that links work stress to burnout has not been sufficiently addressed in research. To examine recovery as a mediator in the relationship between work stress and burnout among teachers. A cross-sectional study of Finnish primary school teachers, in whom burnout was measured with the Maslach Burnout Inventory-General Survey and work stress was conceptualized using the effort-reward imbalance (ERI) model. Recovery was measured with the Recovery Experience Questionnaire and the Jenkins Sleep Problems Scale. Multiple linear regression analyses and bootstrap mediation analyses adjusted for age, gender and total working hours were performed. Among the 76 study subjects, high ERI was associated with burnout and its dimensions of exhaustion, cynicism and reduced professional efficacy. Poor recovery experiences, in terms of low relaxation during leisure time, partially mediated the relationship between ERI and reduced professional efficacy. Sleep problems, in the form of non-restorative sleep, partially mediated the relationship between ERI and both burnout and exhaustion. Supporting a balance between effort and reward at work may enhance leisure time recovery and improve sleep quality, as well as help to reduce burnout rates. © The Author 2016. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Process for the recovery of alkali metal salts from aqueous solutions thereof

International Nuclear Information System (INIS)

Vitner, J.

1984-01-01

In an integrated process for the recovery of alkakli metal phenates and carboxylates from aqueous solutions thereof, the aqueous solution is spray dried and the drying gas stream is contacted with an aqueous alkali metal salt solution which dissolves the particles of the alkali metal salt that were entrained in the drying gas stream. The salt-free inert gas stream is then dried, heated, and returned to the spray dryer

Recovery of Work-Related Stress: Complaint Reduction and Work-Resumption are Relatively Independent Processes

NARCIS (Netherlands)

Vente, W. de; Kamphuis, J.H.; Blonk, R.W.; Emmelkamp, P.M.

2015-01-01

Purpose The process of recovery from work-related stress, consisting of complaint reduction and work-resumption, is not yet fully understood. The aim of this study was to investigate predictors of complaint reduction and work-resumption, as well as testing complaint reduction as a mediator in the

Recovery of work-related stress: Complaint reduction and work-resumption are relatively independent processes

NARCIS (Netherlands)

de Vente, W.; Kamphuis, J.H.; Blonk, R.W.B.; Emmelkamp, P.M.G.

2015-01-01

Purpose: The process of recovery from work-related stress, consisting of complaint reduction and work-resumption, is not yet fully understood. The aim of this study was to investigate predictors of complaint reduction and work-resumption, as well as testing complaint reduction as a mediator in the

A green process for recovery of 1-propanol/2-propanol from their aqueous solutions: Experimental and MD simulation studies

International Nuclear Information System (INIS)

Gupta, Bhupender S.; Taha, Mohamed; Lee, Ming-Jer

2017-01-01

Highlights: • A green conceptual design for separating propanols from their aqueous solutions is proposed. • TRIS is biocompatible and non-volatile and can be used as an auxiliary agent for the separation. • Isobaric VLE data for 1-propanol/2-propanol + water + TRIS were measured at 101.3 kPa. • The azeotropic compositions are significantly shifted in the presence of TRIS. • Intermolecular interactions were studied with fluorescence, COSMO-RS, and MD simulation. - Abstract: In the present study, we have found that a common and relatively inexpensive biological buffer tris(hydroxymethyl)aminomethane (TRIS) is potentially applicable to shift the azeotrope compositions of aqueous solutions of 1-propanol and 2-propanol. By taking the advantage of our findings, we are proposing a green process for the recovery of these organics from their respective aqueous solutions. In order to confirm the effect of TRIS buffer on vapor–liquid equilibrium behavior of the aqueous propanol systems, we measured the isobaric vapor–liquid equilibrium (VLE) data at 101.3 kPa for the 1-proponol + water + TRIS and 2-propanol + water + TRIS systems over the azeotropic range with various concentrations of TRIS (0.02, 0.04, 0.08, and 0.12 in mole fraction). The binary interaction parameters were obtained for TRIS with water, TRIS with 1-propanol, and TRIS with 2-propanol by correlating the new VLE data with the NRTL model. The isobaric VLE properties for the investigated propanol + water mixtures in the presence of various concentrations of TRIS were also predicted with the conductor-like screening model COSMO-RS. Based on the predicted excess molar enthalpies (H E m ) from the COSMO-RS, the interactions between all constituent pairs of molecules were estimated. To explore the mechanism of TRIS-based separation of 1-propanol/2-propanol from their aqueous solutions, the interactions between different pairs of molecules were also investigated by using fluorescence analysis and

Enhancing conceptual change using argumentative essays

Science.gov (United States)

Kalman, Calvin S.; Rohar, Shelley; Wells, David

2004-05-01

We show the utility of following up collaborative group work with written exercises. In a previous paper we discussed promoting conceptual change using collaborative group exercises in a manner based on the notion of conceptual conflict developed by Hewson and Hewson in which representatives of differing viewpoints debate their outlook. In this paper, we describe an enhancement of this method based on Feyerabend's principle of counterinduction—the process by which one theory or idea is used to affect change in its rival. Students were required to follow up the conceptual conflict exercises with a written critique. Evaluations were done using the same enhanced version of the force concept inventory as administered to the students in the previous study.

A biopsychosocial approach to sexual recovery after prostate cancer surgery: the role of grief and mourning.

Science.gov (United States)

Wittmann, Daniela; Foley, Sallie; Balon, Richard

2011-01-01

Erectile dysfunction is a common side-effect of prostate cancer surgery that causes men suffering and hinders their sexual recovery. There are studies that describe men's and partners' distress and couples' difficulties engaging in sexual recovery. A few studies show a short-term benefit of brief psycho-social interventions such as psychoeducation and counseling. However, there is no conceptual framework to guide psychosocial treatments. We propose a model of intervention in sexual recovery that incorporates grief and mourning as a gateway to new and satisfying sexuality after prostate cancer treatment.

Towards a Modernization Process for Secure Data Warehouses

Science.gov (United States)

Blanco, Carlos; Pérez-Castillo, Ricardo; Hernández, Arnulfo; Fernández-Medina, Eduardo; Trujillo, Juan

Data Warehouses (DW) manage crucial enterprise information used for the decision making process which has to be protected from unauthorized accesses. However, security constraints are not properly integrated in the complete DWs’ development process, being traditionally considered in the last stages. Furthermore, legacy systems need a reverse engineering process in order to accomplish re-documentation for detecting new security requirements as well as system’s design recovery to enable migration and reuse. Thus, we have proposed a model driven architecture (MDA) for secure DWs which takes into account security issues from the early stages of development and provides automatic transformations between models. This paper fulfills this architecture providing an architecture-driven modernization (ADM) process focused on obtaining conceptual security models from legacy OLAP systems.

Recovery process of wall condition in KSTAR vacuum vessel after temporal machine-vent for repair

Energy Technology Data Exchange (ETDEWEB)

Kim, Kwang Pyo, E-mail: kpkim@nfri.er.ke; Hong, Suk-Ho; Lee, Hyunmyung; Song, Jae-in; Jung, Nam-Yong; Lee, Kunsu; Chu, Yong; Kim, Hakkun; Park, Kaprai; Oh, Yeong-Kook

2015-10-15

Highlights: • Efforts have been made to obtain vacuum condition that is essential for the plasma experiments. • For example, the vacuum vessel should be vented to repair in-vessel components such as diagnostic shutter, and PFC damaged by high energy plasma. • Here, we present the recovery process of wall condition in KSTAR after temporal machine-vent for repair. • It is found that an acceptable vacuum condition has been achieved only by plasma based wall conditioning techniques such as baking, GDC, and boronization. • This study was that the proper recovering method of the vacuum condition should be developed according to the severity of the accident. - Abstract: Efforts have been made to obtain vacuum condition that is essential for the plasma experiments. Under certain situations, for example, the vacuum vessel should be vented to repair in-vessel components such as diagnostic shutter, exchange of window for diagnostic equipment, and PFC damaged by high energy plasma. For the quick restart of the campaign, a recovery process was established to make the vacuum condition acceptable for the plasma experiment. In this paper, we present the recovery process of wall condition in KSTAR after temporal machine-vent for repair. It is found that an acceptable vacuum condition has been achieved only by plasma based wall conditioning techniques such as baking, GDC, and boronization. This study was that the proper recovering method of the vacuum condition should be developed according to the severity of the accident.

The process of recovery for people diagnosed with personality disorder: a case study of The Haven

OpenAIRE

Castillo, Heather

2010-01-01

The study investigates the process of recovery for people diagnosed with personality disorder. This is related to the application of the new meaning of recovery from mental illness as explored by members of The Haven which, as the service setting for the study, addresses the problems of a client group that suffers significant social exclusion, known to impact on demand for health and other public services. It aims to examine efforts which attempt to reverse this social exclusion as an aspect ...

Method for the recovery of uranium from phosphoric acid, originating from the wet-process of uraniferous phosphate ores

International Nuclear Information System (INIS)

Pyrih, R.Z.; Rickard, R.S.; Carrington, O.F.

1978-01-01

Improvement in the process for recoverying uranium from wet-process phosphoric acid solution derived from the acidulation of uraniferous phosphate ores by the use of two ion exchange circuits is described. (Auth.)

Conceptual and Numerical Models for UZ Flow and Transport

International Nuclear Information System (INIS)

Liu, H.

2000-01-01

The purpose of this Analysis/Model Report (AMR) is to document the conceptual and numerical models used for modeling of unsaturated zone (UZ) fluid (water and air) flow and solute transport processes. This is in accordance with ''AMR Development Plan for U0030 Conceptual and Numerical Models for Unsaturated Zone (UZ) Flow and Transport Processes, Rev 00''. The conceptual and numerical modeling approaches described in this AMR are used for models of UZ flow and transport in fractured, unsaturated rock under ambient and thermal conditions, which are documented in separate AMRs. This AMR supports the UZ Flow and Transport Process Model Report (PMR), the Near Field Environment PMR, and the following models: Calibrated Properties Model; UZ Flow Models and Submodels; Mountain-Scale Coupled Processes Model; Thermal-Hydrologic-Chemical (THC) Seepage Model; Drift Scale Test (DST) THC Model; Seepage Model for Performance Assessment (PA); and UZ Radionuclide Transport Models

Processing of spent nickel catalyst for fat recovery

Directory of Open Access Journals (Sweden)

Ibrahim Nasir, Mohammad

2002-06-01

Full Text Available Spent nickel catalyst (SNC have the potential of insulting the quality of the environment in a number of ways. The disposal of SNC will have a pollution effect. Optimum recovery of fat from SNC , could save the environment and reduce the oil loss. Hexane has been the solvent of choice for oil extraction. Alternative solvents that are considered safer have been evaluated. Hexane, isopropanol, ethanol, and heptane were examined using soxhlet extraction. While hexane was more efficient in oil recovery from SNC, isopropanol proved to be very good, to clarifying separation of oil from waste material and also provide high solvent recovery compared to other solvents. Isopropanol extraction with chill provided separation of miscella into two phases: lower oil–rich and an upper solvent – rich. It saved much energy of vaporization for distilling. An aqueous extraction process with immiscible solvent assisted was tested. Solvent like hexane added to SNC, and water added later with continuous stirring. The mixture was stirred for about 30 minutes, prior to centrifugation. Aqueous process extracted less amount of oil compared to solvent extraction.El catalizador agotado de níquel (SNC tiene el potencial de dañar la calidad del medio ambiente de diversas formas. El depósito de SNC tendrá un efecto de polución. La recuperación óptima de la grasa a partir del SCN, podría conservar el medio ambiente y reducir la pérdida de aceite. El hexano ha sido el disolvente elegido para la extracción del aceite. También se han evaluado disolventes alternativos que son considerados seguros. Se han examinado hexano, isopropanol, etanol y heptano usando extracción con soxhlet. Mientras que el hexano fue el mas eficaz en la recuperación del aceite, el isopropanol demostró ser muy bueno para aclarar la separación del aceite a partir de la materia residual y también proporcionó una alta recuperación del disolvente en comparación con los otros

Optimization of a sample processing protocol for recovery of Bacillus anthracis spores from soil

Science.gov (United States)

Silvestri, Erin E.; Feldhake, David; Griffin, Dale; Lisle, John T.; Nichols, Tonya L.; Shah, Sanjiv; Pemberton, A; Schaefer III, Frank W

2016-01-01

Following a release of Bacillus anthracis spores into the environment, there is a potential for lasting environmental contamination in soils. There is a need for detection protocols for B. anthracis in environmental matrices. However, identification of B. anthracis within a soil is a difficult task. Processing soil samples helps to remove debris, chemical components, and biological impurities that can interfere with microbiological detection. This study aimed to optimize a previously used indirect processing protocol, which included a series of washing and centrifugation steps. Optimization of the protocol included: identifying an ideal extraction diluent, variation in the number of wash steps, variation in the initial centrifugation speed, sonication and shaking mechanisms. The optimized protocol was demonstrated at two laboratories in order to evaluate the recovery of spores from loamy and sandy soils. The new protocol demonstrated an improved limit of detection for loamy and sandy soils over the non-optimized protocol with an approximate matrix limit of detection at 14 spores/g of soil. There were no significant differences overall between the two laboratories for either soil type, suggesting that the processing protocol will be robust enough to use at multiple laboratories while achieving comparable recoveries.

Conceptual Change within Dyadic Interactions: The Dance of Conceptual and Material Agency

Science.gov (United States)

Heyd-Metzuyanim, Einat; Schwarz, Baruch B.

2017-01-01

We offer a new approach to emergent knowledge in processes of conceptual change in dyadic interaction by drawing on Pickering's ("The Mangle of Practice," The University of Chicago Press, London, 1995) Mangle of Practice theory, which theorizes the emergence of new scientific knowledge as occurring due to material resistance and human…

Analysis of an optimal resorption cogeneration using mass and heat recovery processes

International Nuclear Information System (INIS)

Lu, Yiji; Wang, Yaodong; Bao, Huashan; Yuan, Ye; Wang, Liwei; Roskilly, Anthony Paul

2015-01-01

Highlights: • Resorption cogeneration for electricity and refrigeration generation. • Mass and heat recovery to further improve the performance. • The first and second law analysis. - Abstract: This paper presents an optimised resorption cogeneration using mass and heat recovery to improve the performance of a novel resorption cogeneration fist proposed by Wang et al. This system combines ammonia-resorption technology and expansion machine into one loop, which is able to generate refrigeration and electricity from low-grade heat sources such as solar energy and industrial waste heat. Two sets of resorption cycle are designed to overcome the intermittent performance of the chemisorption and produce continuous/simultaneous refrigeration and electricity. In this paper, twelve resorption working pairs of salt complex candidates are analysed by the first law analysis using Engineering Equation Solver (EES). The optimal resorption working pairs from the twelve candidates under the driven temperature from 100 °C to 300 °C are identified. By applying heat/mass recovery, the coefficient of performance (COP) improvement is increased by 38% when the high temperature salt (HTS) is NiCl 2 and by 35% when the HTS is MnCl 2 . On the other hand, the energy efficiency of electricity has also been improved from 8% to 12% with the help of heat/mass recovery. The second law analysis has also been applied to investigate the exergy utilisation and identify the key components/processes. The highest second law efficiency is achieved as high as 41% by the resorption working pair BaCl 2 –MnCl 2 under the heat source temperature at 110 °C.

New concepts for the recovery and isotopic separation of tritium in fusion reactors

International Nuclear Information System (INIS)

Dombra, A.H.; Holtslander, W.J.; Miller, A.I.; Canadian Fusion Fuels Technology Project, Toronto, Ontario)

1986-01-01

New concepts for the recovery of tritium from light water coolant of LiPb blankets, and high-pressure helium coolant of Li-ceramic blankets are introduced. Application of these concepts to fusion reactors is illustrated with conceptual system designs for the anticipated NET blanket requirements. (author)

Unifying screening processes within the PROSPR consortium: a conceptual model for breast, cervical, and colorectal cancer screening.

Science.gov (United States)

Beaber, Elisabeth F; Kim, Jane J; Schapira, Marilyn M; Tosteson, Anna N A; Zauber, Ann G; Geiger, Ann M; Kamineni, Aruna; Weaver, Donald L; Tiro, Jasmin A

2015-06-01

General frameworks of the cancer screening process are available, but none directly compare the process in detail across different organ sites. This limits the ability of medical and public health professionals to develop and evaluate coordinated screening programs that apply resources and population management strategies available for one cancer site to other sites. We present a trans-organ conceptual model that incorporates a single screening episode for breast, cervical, and colorectal cancers into a unified framework based on clinical guidelines and protocols; the model concepts could be expanded to other organ sites. The model covers four types of care in the screening process: risk assessment, detection, diagnosis, and treatment. Interfaces between different provider teams (eg, primary care and specialty care), including communication and transfer of responsibility, may occur when transitioning between types of care. Our model highlights across each organ site similarities and differences in steps, interfaces, and transitions in the screening process and documents the conclusion of a screening episode. This model was developed within the National Cancer Institute-funded consortium Population-based Research Optimizing Screening through Personalized Regimens (PROSPR). PROSPR aims to optimize the screening process for breast, cervical, and colorectal cancer and includes seven research centers and a statistical coordinating center. Given current health care reform initiatives in the United States, this conceptual model can facilitate the development of comprehensive quality metrics for cancer screening and promote trans-organ comparative cancer screening research. PROSPR findings will support the design of interventions that improve screening outcomes across multiple cancer sites. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Waste Receiving and Processing Facility Module 2A: Advanced Conceptual Design Report. Volume 1

Energy Technology Data Exchange (ETDEWEB)

1994-03-01

This ACDR was performed following completed of the Conceptual Design Report in July 1992; the work encompassed August 1992 to January 1994. Mission of the WRAP Module 2A facility is to receive, process, package, certify, and ship for permanent burial at the Hanford site disposal facilities the Category 1 and 3 contact handled low-level radioactive mixed wastes that are currently in retrievable storage at Hanford and are forecast to be generated over the next 30 years by Hanford, and waste to be shipped to Hanford from about DOE sites. This volume provides an introduction to the ACDR process and the scope of the task along with a project summary of the facility, treatment technologies, cost, and schedule. Major areas of departure from the CDR are highlighted. Descriptions of the facility layout and operations are included.

Acting in Good Time – Conceptual Reflections on the Sequencing of Political Reform Processes

Directory of Open Access Journals (Sweden)

Jürgen Beyer

2012-12-01

Full Text Available Thus far, the sequencing of political reform processes has been discussed on a separate basis in the context of different scientific debates. Existing analysis in macroeconomics and democracy theory focuses on shock-therapeutic versus gradual reform policies, the succession of specific reform steps or the right timing of reforms. An analytical approach to sequences has been elaborated. Theoretical concepts of social change, which refer to path dependence or the punctuated development of historical sequences, have evolved in the context of institutionalist research. The present article summarises the state of research and extends it with conceptual reflections on the motivation of sequential political action, which can then serve as a starting point for differentiation between sequencing processes in further research.

[A process of aquatic ecological function regionalization: The dual tree framework and conceptual model].

Science.gov (United States)

Guo, Shu Hai; Wu, Bo

2017-12-01

Aquatic ecological regionalization and aquatic ecological function regionalization are the basis of water environmental management of a river basin and rational utilization of an aquatic ecosystem, and have been studied in China for more than ten years. Regarding the common problems in this field, the relationship between aquatic ecological regionalization and aquatic ecological function regionalization was discussed in this study by systematic analysis of the aquatic ecological zoning and the types of aquatic ecological function. Based on the dual tree structure, we put forward the RFCH process and the diamond conceptual model. Taking Liaohe River basin as an example and referring to the results of existing regionalization studies, we classified the aquatic ecological function regions based on three-class aquatic ecological regionalization. This study provided a process framework for aquatic ecological function regionalization of a river basin.

Self psychology conceptualization of postpsychotic depression and recovery among paranoid schizophrenic patients.

Science.gov (United States)

Potik, David

2014-01-01

Many psychoanalysts have offered innovative ideas on the treatment of schizophrenic patients, but none on postpsychotic depression. The author presents a psychoanalytic conceptualization of postpsychotic depression based on Kohut's ideas regarding the development of normal and pathological grandiosity. The main premise is that postpsychotic depression stems from the loss of psychotic grandiosity, and that it is the psychological reaction to the loss of omnipotent identity whose role it is to provide an alternative reality. Through near-experience connectedness, clinicians and practitioners in the psychiatric rehabilitation field can facilitate an empathic milieu in which new mental constructs can be established and new behavioral skills can be learned.

Time course of cognitive recovery after propofol anaesthesia: a level of processing approach.

Science.gov (United States)

N'Kaoua, Bernard; Véron, Anne-Lise H; Lespinet, Véronique C; Claverie, Bernard; Sztark, François

2002-09-01

The aim of this study was to investigate the time course of recovery of verbal memory after general anaesthesia, as a function of the level (shallow or deep) of processing induced at the time of encoding. Thirty-one patients anaesthetized with propofol and alfentanil were compared with 28 control patients receiving only alfentanil. Memory functions were assessed the day before and 1, 6 and 24 hr after operation. Results show that for the anaesthetized group, shallow processing was impaired for 6 hr after surgery whereas the deeper processing was not recovered even at 24 hr. In addition, no specific effect of age was found.

The acid aging as alternative process for uranium recovery from silicated ores

International Nuclear Information System (INIS)

Cipriani, M.; Della Testa, A.

1984-01-01

The influence of different variables on the extraction uranium efficiency and on the silicate solubility by means of acid aging is studied. The variables studied in bench scale were: acid/ore, oxidizing/ore and liquid/solid relationships; reaction time; temperature and recovery time. The results are discussed and compared with the ones of continuous operation of a semi-pilot plant. A flowsheet of the industrial process application is presented. (M.A.C.) [pt

Conceptual and perceptual factors in the picture superiority effect

OpenAIRE

Stenberg, Georg

2006-01-01

The picture superiority effect, i.e. better memory for pictures than for corresponding words, has been variously ascribed to a conceptual or a perceptual processing advantage. The present study aimed to disentangle perceptual and conceptual contributions. Pictures and words were tested for recognition in both their original formats and translated into participants´ second language. Multinomial Processing Tree (Batchelder & Riefer, 1999) and MINERVA (Hintzman, 1984) models were fitted to t...

Recovery of Rare Earth Elements from Coal and Coal Byproducts via a Closed Loop Leaching Process: Final Report

Energy Technology Data Exchange (ETDEWEB)

Peterson, Richard [Battelle Memorial Inst., Columbus, OH (United States); Heinrichs, Michael [Battelle Memorial Inst., Columbus, OH (United States); Argumedo, Darwin [Battelle Memorial Inst., Columbus, OH (United States); Taha, Rachid [Battelle Memorial Inst., Columbus, OH (United States); Winecki, Slawomir [Battelle Memorial Inst., Columbus, OH (United States); Johnson, Kathryn [Battelle Memorial Inst., Columbus, OH (United States); Lane, Ann [Battelle Memorial Inst., Columbus, OH (United States); Riordan, Daniel [Battelle Memorial Inst., Columbus, OH (United States)

2017-08-31

Objectives: Through this grant, Battelle proposes to address Area of Interest (AOI) 1 to develop a bench-scale technology to economically separate, extract, and concentrate mixed REEs from coal ash. U.S. coal and coal byproducts provide the opportunity for a domestic source of REEs. The DOE’s National Energy Technology Laboratory (NETL) has characterized various coal and coal byproducts samples and has found varying concentrations of REE ranging up to 1,000 parts per million by weight. The primary project objective is to validate the economic viability of recovering REEs from the coal byproduct coal ash using Battelle’s patented closed-loop Acid Digestion Process (ADP). This will be accomplished by selecting coal sources with the potential to provide REE concentrations above 300 parts per million by weight, collecting characterization data for coal ash samples generated via three different methods, and performing a Techno-Economic Analysis (TEA) for the proposed process. The regional availability of REE-laden coal ash, the regional market for rare earth concentrates, and the system capital and operating costs for rare earth recovery using the ADP technology will be accounted for in the TEA. Limited laboratory testing will be conducted to generate the parameters needed for the design of a bench scale system for REE recovery. The ultimate project outcome will be the design for an optimized, closed loop process to economically recovery REEs such that the process may be demonstrated at the bench scale in a Phase 2 project. Project Description: The project will encompass evaluation of the ADP technology for the economic recovery of REEs from coal and coal ash. The ADP was originally designed and demonstrated for the U.S. Army to facilitate demilitarization of cast-cured munitions via acid digestion in a closed-loop process. Proof of concept testing has been conducted on a sample of Ohio-based Middle Kittanning coal and has demonstrated the feasibility of recovering

Development of a higher-order finite volume method for simulation of thermal oil recovery process using moving mesh strategy

Energy Technology Data Exchange (ETDEWEB)

Ahmadi, M. [Heriot Watt Univ., Edinburgh (United Kingdom)

2008-10-15

This paper described a project in which a higher order up-winding scheme was used to solve mass/energy conservation equations for simulating steam flood processes in an oil reservoir. Thermal recovery processes are among the most complex because they require a detailed accounting of thermal energy and chemical reaction kinetics. The numerical simulation of thermal recovery processes involves localized phenomena such as saturation and temperatures fronts due to hyperbolic features of governing conservation laws. A second order accurate FV method that was improved by a moving mesh strategy was used to adjust for moving coordinates on a finely gridded domain. The Finite volume method was used and the problem of steam injection was then tested using derived solution frameworks on both mixed and moving coordinates. The benefits of using a higher-order Godunov solver instead of lower-order ones were qualified. This second order correction resulted in better resolution on moving features. Preferences of higher-order solvers over lower-order ones in terms of shock capturing is under further investigation. It was concluded that although this simulation study was limited to steam flooding processes, the newly presented approach may be suitable to other enhanced oil recovery processes such as VAPEX, SAGD and in situ combustion processes. 23 refs., 28 figs.

Wargaming Effectiveness: Its Conceptualization and Assessment

National Research Council Canada - National Science Library

Cianciolo, Anna T; Sanders, William R; Black, Barbara A

2006-01-01

.... Cognitive task analysis was used to develop a conceptual framework for understanding the knowledge, skills, and other attributes that comprise the individual and team-related determinants, processes...

Economic Assessment for Recycling Critical Metals From Hard Disk Drives Using a Comprehensive Recovery Process

Science.gov (United States)

Nguyen, Ruby Thuy; Diaz, Luis A.; Imholte, D. Devin; Lister, Tedd E.

2017-09-01

Since the 2011 price spike of rare earth elements (REEs), research on permanent magnet recycling has blossomed globally in an attempt to reduce future REE criticality. Hard disk drives (HDDs) have emerged as one feasible feedstock for recovering valuable REEs such as praseodymium, neodymium, and dysprosium. Nevertheless, current processes for recycling electronic waste only focus on certain metals as a result of feedstock and metal price uncertainties. In addition, there is a perception that recycling REEs is unprofitable. To shed some light on the economic viability of REE recycling from U.S. HDDs, this article combines techno-economic information of an electro-hydrometallurgical process with end-of-life HDD availability in a simulation model. The results showed that adding REE recovery to an HDD base and precious metal recovery process was profitable given current prices. Recovered REEs from U.S. HDDs could meet up to 5.2% rest-of-world (excluding China) neodymium magnet demand. Feedstock, aluminum, and gold prices are key factors to recycling profitability. REEs contributed 13% to the co-recycling profit.

Platinum group metal recovery and catalyst manufacturing process

Energy Technology Data Exchange (ETDEWEB)

Chung, H. S.; Kim, Y. S.; Yoo, J. H.; Lee, H. S.; Ahn, D. H.; Kim, K. R.; Lee, S. H.; Paek, S. W.; Kang, H. S.

1998-03-01

The fission product nuclides generated during the irradiation of reactor fuel include many useful elements, among them platinum group metal such as ruthenium, rhodium and palladium which are of great industrial importance, occur rarely in nature and are highly valuable. In this research, the authors reviewed various PGM recovery methods. Recovery of palladium from seven-component simulated waste solution was conducted by selective precipitation method. The recovery yield was more than 99.5% and the purity of the product was more than 99%. Wet-proof catalyst was prepared with the recovered palladium. The specific surface area of the catalyst support was more than 400 m{sup 2}/g. The content of palladium impregnated on the support was 10 wt.%. Hydrogen isotope exchange efficiency of 93 % to equilibrium with small amount of the catalyst was obtained. It was turned out possible to consider using such palladium or other very low active PGM materials in applications where its actively is unimportant as in nuclear industries. (author). 63 refs., 38 tabs., 36 figs.

Uses and abuses of recovery: implementing recovery-oriented practices in mental health systems

Science.gov (United States)

Slade, Mike; Amering, Michaela; Farkas, Marianne; Hamilton, Bridget; O'Hagan, Mary; Panther, Graham; Perkins, Rachel; Shepherd, Geoff; Tse, Samson; Whitley, Rob

2014-01-01

An understanding of recovery as a personal and subjective experience has emerged within mental health systems. This meaning of recovery now underpins mental health policy in many countries. Developing a focus on this type of recovery will involve transformation within mental health systems. Human systems do not easily transform. In this paper, we identify seven mis-uses (“abuses”) of the concept of recovery: recovery is the latest model; recovery does not apply to “my” patients; services can make people recover through effective treatment; compulsory detention and treatment aid recovery; a recovery orientation means closing services; recovery is about making people independent and normal; and contributing to society happens only after the person is recovered. We then identify ten empirically-validated interventions which support recovery, by targeting key recovery processes of connectedness, hope, identity, meaning and empowerment (the CHIME framework). The ten interventions are peer support workers, advance directives, wellness recovery action planning, illness management and recovery, REFOCUS, strengths model, recovery colleges or recovery education programs, individual placement and support, supported housing, and mental health trialogues. Finally, three scientific challenges are identified: broadening cultural understandings of recovery, implementing organizational transformation, and promoting citizenship. PMID:24497237

Exploring Effects of High School Students' Mathematical Processing Skills and Conceptual Understanding of Chemical Concepts on Algorithmic Problem Solving

Science.gov (United States)

Gultepe, Nejla; Yalcin Celik, Ayse; Kilic, Ziya

2013-01-01

The purpose of the study was to examine the effects of students' conceptual understanding of chemical concepts and mathematical processing skills on algorithmic problem-solving skills. The sample (N = 554) included grades 9, 10, and 11 students in Turkey. Data were collected using the instrument "MPC Test" and with interviews. The MPC…

The Importance of Dialogic Processes to Conceptual Development in Mathematics

Science.gov (United States)

Kazak, Sibel; Wegerif, Rupert; Fujita, Taro

2015-01-01

We argue that dialogic theory, inspired by the Russian scholar Mikhail Bakhtin, has a distinct contribution to the analysis of the genesis of understanding in the mathematics classroom. We begin by contrasting dialogic theory to other leading theoretical approaches to understanding conceptual development in mathematics influenced by Jean Piaget…

When is typography conceptual?

DEFF Research Database (Denmark)

Ejlers, Steen

2013-01-01

A conceptual artwork is not necessarily constituted by exceptional practical skill, sublime execution or whatever might otherwise regularly characterize “fine art”. Instead, the effort is seated in the preparatory process of thought – or as Sol Lewitt once put it: “The idea becomes a machine that...

Eco-friendly copper recovery process from waste printed circuit boards using Fe{sup 3+}/Fe{sup 2+} redox system

Energy Technology Data Exchange (ETDEWEB)

Fogarasi, Szabolcs [Babeş-Bolyai University, Faculty of Chemistry and Chemical Engineering, 11 Arany Janos Street, Cluj-Napoca RO-400028 (Romania); Imre-Lucaci, Florica [Babeş-Bolyai University, Interdisciplinary Research Institute on Bio-Nano-Sciences, 42 Treboniu Laurian Street, Cluj-Napoca RO-400271 (Romania); Egedy, Attila [University of Pannonia, Department of Process Engineering, Egyetem Str. 10, H-8200 Veszprém (Hungary); Imre-Lucaci, Árpád, E-mail: aimre@chem.ubbcluj.ro [Babeş-Bolyai University, Faculty of Chemistry and Chemical Engineering, 11 Arany Janos Street, Cluj-Napoca RO-400028 (Romania); Ilea, Petru [Babeş-Bolyai University, Faculty of Chemistry and Chemical Engineering, 11 Arany Janos Street, Cluj-Napoca RO-400028 (Romania)

2015-06-15

Highlights: • We developed an ecofriendly mediated electrochemical process for copper recovery. • The recovery of copper was achieved without mechanical pretreatment of the samples. • We identified the optimal flow rate for the leaching and electrowinning of copper. • The copper content of the obtained cathodic deposits was over 99.9%. - Abstract: The present study aimed at developing an original and environmentally friendly process for the recovery of copper from waste printed circuit boards (WPCBs) by chemical dissolution with Fe{sup 3+} combined with the simultaneous electrowinning of copper and oxidant regeneration. The recovery of copper was achieved in an original set-up consisting of a three chamber electrochemical reactor (ER) connected in series with a chemical reactor (CR) equipped with a perforated rotating drum. Several experiments were performed in order to identify the optimal flow rate for the dissolution of copper in the CR and to ensure the lowest energy consumption for copper electrodeposition in the ER. The optimal hydrodynamic conditions were provided at 400 mL/min, leading to the 75% dissolution of metals and to a low specific energy consumption of 1.59 kW h/kg Cu for the electrodeposition process. In most experiments, the copper content of the obtained cathodic deposits was over 99.9%.

Guide for developing conceptual models for ecological risk assessments

International Nuclear Information System (INIS)

Suter, G.W., II.

1996-05-01

Ecological conceptual models are the result of the problem formulation phase of an ecological risk assessment, which is an important component of the Remedial Investigation process. They present hypotheses of how the site contaminants might affect the site ecology. The contaminant sources, routes, media, routes, and endpoint receptors are presented in the form of a flow chart. This guide is for preparing the conceptual models; use of this guide will standardize the models so that they will be of high quality, useful to the assessment process, and sufficiently consistent so that connections between sources of exposure and receptors can be extended across operable units (OU). Generic conceptual models are presented for source, aquatic integrator, groundwater integrator, and terrestrial OUs

Shared decision making and medication management in the recovery process.

Science.gov (United States)

Deegan, Patricia E; Drake, Robert E

2006-11-01

Mental health professionals commonly conceptualize medication management for people with severe mental illness in terms of strategies to increase compliance or adherence. The authors argue that compliance is an inadequate construct because it fails to capture the dynamic complexity of autonomous clients who must navigate decisional conflicts in learning to manage disorders over the course of years or decades. Compliance is rooted in medical paternalism and is at odds with principles of person-centered care and evidence-based medicine. Using medication is an active process that involves complex decision making and a chance to work through decisional conflicts. It requires a partnership between two experts: the client and the practitioner. Shared decision making provides a model for them to assess a treatment's advantages and disadvantages within the context of recovering a life after a diagnosis of a major mental disorder.

Conceptual Configuration of Pharmaceutical Plants in 3D

DEFF Research Database (Denmark)

Ladeby, Klaes Rohde; Larsen, Bent Dalgaard; Gjøl, Mikkel

2007-01-01

In the conceptual design phase of pharmaceutical plants as much as 80%-90% of the total cost of a project is committed. It is therefore essential that the chosen concept is viable. Configuration and 3D models can help validate the decisions made in the conceptual design process. Designing 3D models...... is a complex task and requires skilled users. We demonstrate that a simple 2D/3D configuration tool can support conceptualizing of pharmaceutical plants. Present paper reports on preliminary results from a full scale implementation project at a Danish engineering company....

Structural Analysis in a Conceptual Design Framework

Science.gov (United States)

Padula, Sharon L.; Robinson, Jay H.; Eldred, Lloyd B.

2012-01-01

Supersonic aircraft designers must shape the outer mold line of the aircraft to improve multiple objectives, such as mission performance, cruise efficiency, and sonic-boom signatures. Conceptual designers have demonstrated an ability to assess these objectives for a large number of candidate designs. Other critical objectives and constraints, such as weight, fuel volume, aeroelastic effects, and structural soundness, are more difficult to address during the conceptual design process. The present research adds both static structural analysis and sizing to an existing conceptual design framework. The ultimate goal is to include structural analysis in the multidisciplinary optimization of a supersonic aircraft. Progress towards that goal is discussed and demonstrated.

Reciprocity in therapeutic relationships: A conceptual review.

Science.gov (United States)

Sandhu, Sima; Arcidiacono, Eleonora; Aguglia, Eugenio; Priebe, Stefan

2015-12-01

Reciprocity has generally been understood as a process of giving and taking, within an exchange of emotions or services, and has long been recognized as a central part of human life. However, an understanding of reciprocity in professional helping relationships has seldom received attention, despite movements in mental health care towards more collaborative approaches between service users and professionals. In this review, a systematic search of the published papers was conducted in order to explore how reciprocity is conceptualized and understood as part of the dyadic therapeutic relationship between professionals and service users. Eleven papers met our inclusion criteria and a narrative synthesis was used to synthesize the key concepts of reciprocity. The concepts of: 'dynamic equilibrium', 'shared affect', 'asymmetric alliance', and 'recognition as a fellow human being' were recurrent in understandings of reciprocity in professional contexts. These conceptualizations of reciprocity were also linked to specific behavioural and psychological processes. The findings suggest that reciprocity may be conceptualized and incorporated as a component of mental health care, with recurrent and observable processes which may be harnessed to promote positive outcomes for service users. To this end, we make recommendations for further research to progress and develop reciprocal processes in mental health care. © 2015 Australian College of Mental Health Nurses Inc.

Recovery of clean coal fines through a combination of gravity concentrator and flotation processes

Energy Technology Data Exchange (ETDEWEB)

Gupta, A.K.; Banerjee, P.K.; Dutta, A.; Mishra, A. [Tata Steel, Jamshedpur (India). Research & Development

2007-07-01

Flotation feed is a mixture of coarse and ultra-fine fractions. During conditioning of the flotation feed with collector and frother, the finer fraction consumes more reagents as compared to coarser particles. This is mainly due to more specific surface area of the ultra fine than the coarse fraction. This favors the adsorption of reagents toward ultra-finer fractions leads to less complete surface coverage of coarse particles and more entrainment of finer gangue particles. This results in the lower yield of coarse fractions from the flotation circuit and loss in selectivity. Hence, the major challenge is to improve the recovery of the coarser fraction and selectivity of ultra-fine fractions by improving flotation kinetics of all size fractions. This article deals with an approach to overcome the improper reagent adsorption by fine and coarse coal fractions in the flotation circuit through an innovative washing circuit containing gravity operation and flotation processes. Flotation performance between a new washing circuit having stub cyclone and flotation and normal single-stage reagent addition flotation process is compared in terms of selectivity, separation efficiency, rate constant, and size-wise recovery. The washing circuit having stub cyclone and flotation processes improves the fine clean coal yield by 10% and reduces the consumption of reagent compared to the normal single-stage reagent addition flotation process.

Cleanex process: a versatile solvent extraction process for recovery and purification of lanthanides, americium, and curium

International Nuclear Information System (INIS)

Bigelow, J.E.; Collins, E.D.; King, L.J.

1979-01-01

At a concentration of 1 M in straight-chain hydrocarbon diluent, HDEHP will extract americium, curium, and other trivalent actinide and lanthanide elements from dilute acid or salt solutions. The solute is back-extracted with more concentrated acid, either nitric or hydrochloric. The process has been used in the continuous, countercurrent mode, but its greatest advantage arises in batch extractions where the excess acid can be titrated with NaOH to produce a final acidity of about 0.03 M. Under these conditions, 99% recovery can be achieved, usually in one stage. Cleanex was used on the 50-liter scale at the Transuranium Processing Plant at Oak Ridge for 12 years to provide a broad spectrum cleanup to transuranium elements before applying more sophisticated techniques for separating individual products. The process is also used routinely to recover excessive losses of curium and/or californium from plant waste streams. The solvent system is relatively resistant to radiation damage, being usable up to 200 W-h/liter

Conceptual design of cost-effective and environmentally-friendly configurations for fuel ethanol production from sugarcane by knowledge-based process synthesis.

Science.gov (United States)

Sánchez, Óscar J; Cardona, Carlos A

2012-01-01

In this work, the hierarchical decomposition methodology was used to conceptually design the production of fuel ethanol from sugarcane. The decomposition of the process into six levels of analysis was carried out. Several options of technological configurations were assessed in each level considering economic and environmental criteria. The most promising alternatives were chosen rejecting the ones with a least favorable performance. Aspen Plus was employed for simulation of each one of the technological configurations studied. Aspen Icarus was used for economic evaluation of each configuration, and WAR algorithm was utilized for calculation of the environmental criterion. The results obtained showed that the most suitable synthesized flowsheet involves the continuous cultivation of Zymomonas mobilis with cane juice as substrate and including cell recycling and the ethanol dehydration by molecular sieves. The proposed strategy demonstrated to be a powerful tool for conceptual design of biotechnological processes considering both techno-economic and environmental indicators. Copyright © 2011 Elsevier Ltd. All rights reserved.

SOLVENT-BASED ENHANCED OIL RECOVERY PROCESSES TO DEVELOP WEST SAK ALASKA NORTH SLOPE HEAVY OIL RESOURCES

Energy Technology Data Exchange (ETDEWEB)

David O. Ogbe; Tao Zhu

2004-01-01

A one-year research program is conducted to evaluate the feasibility of applying solvent-based enhanced oil recovery processes to develop West Sak and Ugnu heavy oil resources found on the Alaska North Slope (ANS). The project objective is to conduct research to develop technology to produce and market the 300-3000 cp oil in the West Sak and Ugnu sands. During the first phase of the research, background information was collected, and experimental and numerical studies of vapor extraction process (VAPEX) in West Sak and Ugnu are conducted. The experimental study is designed to foster understanding of the processes governing vapor chamber formation and growth, and to optimize oil recovery. A specially designed core-holder and a computed tomography (CT) scanner was used to measure the in-situ distribution of phases. Numerical simulation study of VAPEX was initiated during the first year. The numerical work completed during this period includes setting up a numerical model and using the analog data to simulate lab experiments of the VAPEX process. The goal was to understand the mechanisms governing the VAPEX process. Additional work is recommended to expand the VAPEX numerical study using actual field data obtained from Alaska North Slope.

Development and optimisation of process parameters for recovery of uranium from calcia slag and lining material (SLM) by leaching process and subsequent recovery of uranium from the leach liquor generated

International Nuclear Information System (INIS)

Verma, Dinesh Kumar; Srivastava, Praveen Kumar; Das, Santanu; Kumar, Raj; Roy, S.B.

2014-01-01

Presently uranium value is recovered by nitric acid dissolution of the SLM, to get uranyl nitrate solution (UNS) and subsequent solvent extraction process. UNS generated After SLM dissolution is very lean in uranium content and create difficulty in solvent extraction. Moreover, NO X is also generated during SLM dissolution in nitric acid. An alternate process was developed where nitric acid is not being used and uranium is being recovered by leaching out the SLM using acetic acid. The process was also optimised for recovery and overall economics of the process by using process effluent AALL (Acetic Acid Leach Liquor) as a leaching agent. The uranium value in the leach liquor was precipitated by using sodium hydroxide. The precipitate was dissolved in nitric acid and the Uranyl Nitrate Solution generated was having Uranium concentration of 15-30 g/l. The alternate process developed will have less effluent generation, less NO X generation and will produce more concentrated UNS in comparison to the nitric acid dissolution process

Supporting technology for enhanced oil recovery: EOR thermal processes. Seventh Amendment and Extension to Annex 4, Enhanced oil recovery thermal processes

Energy Technology Data Exchange (ETDEWEB)

Reid, T B [USDOE Bartlesville Project Office, OK (United States); Colonomos, P [INTEVEP, Filial de Petroleos de Venezuela, SA, Caracas (Venezuela)

1993-02-01

This report contains the results of efforts under the six tasks of the Seventh Amendment and Extension of Annex IV, Enhanced Oil Recovery Thermal Processes of the Venezuela/USA Agreement. The report is presented in sections (for each of the 6 tasks) and each section contains one or more reports prepared by various individuals or groups describing the results of efforts under each of the tasks. A statement of each task, taken from the agreement, is presented on the first page of each section. The tasks are numbered 50 through 55. The first, second, third, fourth, fifth, sixth and seventh reports on Annex IV, Venezuela MEM/USA-DOE Fossil Energy Report IV-1, IV-2, IV-3, IV-4, IV-5 and IV-6 (DOE/BETC/SP-83/15, DOE/BC-84/6/SP, DOE/BC-86/2/SP, DOE/BC-87/2/SP, DOE/BC-89/l/SP, DOE/BC-90/l/SP, and DOE/BC-92/l/SP) contain the results for the first 49 tasks. Those reports are dated April 1983, August 1984, March 1986, July 1987, November 1988, December 1989, and October 1991, respectively. Each task report has been processed separately for inclusion in the Energy Science and Technology Database.

Recovery of laccase from processed Hericium erinaceus (Bull.:Fr) Pers. fruiting bodies in aqueous two-phase system.

Science.gov (United States)

Rajagopalu, Devamalini; Show, Pau Loke; Tan, Yee Shin; Muniandy, Sekaran; Sabaratnam, Vikineswary; Ling, Tau Chuan

2016-09-01

The feasible use of aqueous two-phase systems (ATPSs) to establish a viable protocol for the recovery of laccase from processed Hericium erinaceus (Bull.:Fr.) Pers. fruiting bodies was evaluated. Cold-stored (4.00±1.00°C) H. erinaceus recorded the highest laccase activities of 2.02±0.04 U/mL among all the processed techniques. The evaluation was carried out in twenty-five ATPSs, which composed of polyethylene glycol (PEG) with various molecular weights and potassium phosphate salt solution to purify the protein from H. erinaceus. Optimum recovery condition was observed in the ATPS which contained 17% (w/w) PEG with a molecular weight of 8000 and 12.2% (w/w) potassium phosphate solution, at a volume ratio (VR) of 1.0. The use of ATPS resulted in one-single primary recovery stage process that produced an overall yield of 99% with a purification factor of 8.03±0.46. The molecular mass of laccases purified from the bottom phase was in the range of 55-66 kDa. The purity of the partitioned laccase was confirmed with sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Copyright © 2016 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Towards to An Explanation for Conceptual Change: A Mechanistic Alternative

Science.gov (United States)

Rusanen, Anna-Mari

2014-07-01

Conceptual change is one of the most studied fields in science education and psychology of learning. However, there are still some foundational issues in conceptual change research on which no clear consensus has emerged. Firstly, there is no agreement on what changes in belief and concept systems constitute conceptual change and what changes do not. Secondly, there is no consensus on what the specific mechanisms of conceptual change are. Thirdly, there is no common explanatory framework of how to explain conceptual change. In this paper a sketch for explanations of conceptual change is outlined. According to this account, the explanation for conceptual change requires (1) a description for the information processing task and (2) a sufficiently accurate and detailed description of the cognitive mechanisms responsible for the task. The scope and limits of this type of explanation are discussed.

Democratic Learning Processes: Conceptual and Historical Challenges

DEFF Research Database (Denmark)

Christensen, Ann-Dorte; Rasmussen, Palle

2009-01-01

In this article democratic learning is conceptualised with inspiration from two academic traditions, one being the conceptions of citizenship, political identities and deliberative democracy in political sociology; the other theories and research on social and lifelong learning. The first part......'s empowerment and inclusion in the Danish democratic model. On the background of these two analyses the authors finally discuss some current democratic problems with integrating the diversity represented by ethnic minority groups. The discussion emphasizes the learning theory perspective on the initiative...... of the article outlines the authors' understanding of the core concepts involved. In the second part these conceptual discussions are related to two themes: the question of public adaptation of historical experiences in connection with the German reunification and the learning perspectives related to women...

A framework for techno-economic & environmental sustainability analysis by risk assessment for conceptual process evaluation

DEFF Research Database (Denmark)

Loureiro da Costa Lira Gargalo, Carina; Sin, Gürkan; Carvalho, Ana

2016-01-01

for techno-economic and environmental sustainability analysis through risk assessment is proposed for the early-stage design and screening of conceptual process alternatives. The alternatives within the design space are analyzed following the framework’s work-flow, which targets the following: (i) quantify...... the economic risk; (ii) perform the monetary valuation of environmental impact categories under uncertainty; (iii) quantify the potential environmental risk; (iv) measure the alternatives’ eco-efficiency identifying possible trade-offs; and, lastly (v) propose a joint risk assessment matrix......The need to achieve a sustainable process performance has become increasingly important in order to keep a competitive advantage in the global markets. Development of comprehensive and systematic methods to accomplish this goal is the subject of this work. To this end, a multi-level framework...

A framework for techno-economic & environmental sustainability analysis by risk assessment for conceptual process evaluation

DEFF Research Database (Denmark)

Loureiro da Costa Lira Gargalo, Carina; Sin, Gürkan; Carvalho, Ana

2016-01-01

the economic risk; (ii) perform the monetary valuation of environmental impact categories under uncertainty; (iii) quantify the potential environmental risk; (iv) measure the alternatives’ eco-efficiency identifying possible trade-offs; and, lastly (v) propose a joint risk assessment matrix......The need to achieve a sustainable process performance has become increasingly important in order to keep a competitive advantage in the global markets. Development of comprehensive and systematic methods to accomplish this goal is the subject of this work. To this end, a multi-level framework...... for techno-economic and environmental sustainability analysis through risk assessment is proposed for the early-stage design and screening of conceptual process alternatives. The alternatives within the design space are analyzed following the framework’s work-flow, which targets the following: (i) quantify...

BASIC ASPECTS CONCERNING THE SINGLE CONCEPTUAL FRAMEWORK

Directory of Open Access Journals (Sweden)

Ionela Cristina Breahna Pravat

2013-12-01

Full Text Available Following the creation of a set of concepts, principles and generally accepted international accounting conventions, to which any elaboration, interpretation or enforcement of accounting and financial information would refer, IASC (later IASB has developed, in 1989, the Framework for the Preparation and Presentation of Financial Statements that, although inspired from the American one, didn’t address predominantly only to a single category of users (investors, but several categories of representatives of accounting information demand. Nowadays, it is now known that international body of accounting normalization - IASB (International Accounting Standards Board, cooperates with the American body - FASB (Financial Accounting Standards Board for the purpose of developing a Single Conceptual Framework, which is an important phase in strengthening current and future international accounting standardization process. Conceptual Framework for Financial Reporting, published in September 2010 by the IASB, replaced the Framework for the Preparation and Presentation of Financial Statements issued in 1989 and is actually the result of the current process of updating the General framework of the IASB, but also represents the completion of an important stage in the process to develop a single conceptual framework.

Documentation control process of Brazilian multipurpose reactor: conceptual design and basic design

International Nuclear Information System (INIS)

Kibrit, Eduardo; Prates, Jose Eduardo; Longo, Guilherme Carneiro; Salvetti, Tereza Cristina

2015-01-01

Established in the scope of Plan of Action of the Ministry of Science, Technology and Innovation (PACTI/MCTI) in 2007, the construction of the Brazilian Multipurpose Reactor (RMB) is on the way. This type of reactor has a broad spectrum of applications in the nuclear field and related technologies such as the radioisotopes used as supplies in the production of radiopharmaceuticals, with very much benefit to the Brazilian society being, therefore, the main goal of the Project. RMB Project consists of the following stages: site selection and site evaluation; design (conceptual design, basic design, detailed design and experimental design); construction (procurement, manufacturing; civil construction; electromechanical construction and assembling); commissioning; operation and decommissioning. Each stage requires adaptation of human resources for the stage schedule execution. The implementation of a project of this magnitude requires a complex project management, which covers not only technical, but also administrative areas. Licensing, financial resources, quality and document control systems, engineering are some of the areas involved in project success. The development of the conceptual and basic designs involved the participation of three main engineering companies. INTERTECHNE Consultores S.A. was in charge of conceptual and basic designs for conventional systems of buildings and infrastructure. INVAP S.E. was responsible for preparing the basic design of the reactor core and annexes. MRS Estudos Ambientais Ltda. has prepared documents for environmental licensing. This paper describes the procedures used during conceptual and basic design stages to control design documentation and flow of this documentation, involving the analysis and incorporation of comments from experts, control and storage of a volume of approximately 15,000 documents. (author)

Documentation control process of Brazilian multipurpose reactor: conceptual design and basic design

Energy Technology Data Exchange (ETDEWEB)

Kibrit, Eduardo; Prates, Jose Eduardo; Longo, Guilherme Carneiro; Salvetti, Tereza Cristina, E-mail: ekibrit@ipen.br, E-mail: jeprates@ipen.br, E-mail: glongo@ipen.br, E-mail: salvetti@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2015-07-01

Established in the scope of Plan of Action of the Ministry of Science, Technology and Innovation (PACTI/MCTI) in 2007, the construction of the Brazilian Multipurpose Reactor (RMB) is on the way. This type of reactor has a broad spectrum of applications in the nuclear field and related technologies such as the radioisotopes used as supplies in the production of radiopharmaceuticals, with very much benefit to the Brazilian society being, therefore, the main goal of the Project. RMB Project consists of the following stages: site selection and site evaluation; design (conceptual design, basic design, detailed design and experimental design); construction (procurement, manufacturing; civil construction; electromechanical construction and assembling); commissioning; operation and decommissioning. Each stage requires adaptation of human resources for the stage schedule execution. The implementation of a project of this magnitude requires a complex project management, which covers not only technical, but also administrative areas. Licensing, financial resources, quality and document control systems, engineering are some of the areas involved in project success. The development of the conceptual and basic designs involved the participation of three main engineering companies. INTERTECHNE Consultores S.A. was in charge of conceptual and basic designs for conventional systems of buildings and infrastructure. INVAP S.E. was responsible for preparing the basic design of the reactor core and annexes. MRS Estudos Ambientais Ltda. has prepared documents for environmental licensing. This paper describes the procedures used during conceptual and basic design stages to control design documentation and flow of this documentation, involving the analysis and incorporation of comments from experts, control and storage of a volume of approximately 15,000 documents. (author)

Recovery of plutonium from solvent wash solutions

International Nuclear Information System (INIS)

Kyser, E.A.

1992-01-01

A number of potential alternatives to the acid hydrolysis recovery of Pu were investigated. The most promising alternative for short-term use appears to be an anion exchange process that would eliminate the long boiling times and the multiple-pass concentration steps needed with the solvent extraction process because it separates the Pu from the dibutyl phosphate (DBP) while at the same time concentrating the Pu. However, restart of the Primary Recovery Column (PRC) to process this solution would require significant administrative effort. The original boiling recovery by acid hydrolysis followed by solvent extraction is probably the most expedient way to process the Pu-DBP-carbonate solution currently stored in tank 13.5 even with its long processing times and dilute product concentration. Anion exchange of a heat stabilized acidified solution is a more efficient process, but requires restart of the PRC. Extended-boiling acid hydrolysis or anion exchange of a heat stabilized acidified solution provide two well developed alternatives for recovery of the Pu from the tank 13.5 carbonate. Further work defining additional recovery processes is not planned at this time

Conceptual design for the Waste Receiving and Processing facility Module 2A

International Nuclear Information System (INIS)

1992-07-01

This is a Conceptual Design Report (CDR) for the Waste Receiving and Processing (WRAP) Module 2A facility at Hanford Reservation. The mission of the WRAP Module 2A facility is to receive, process, package, certify, and ship for permanent burial at the Hanford site disposal facilities those contact handled (CH) low-level radioactive mixed wastes (LLMW) that: (1) are currently in retrievable storage at the Hanford Central Waste Complex (HCWC) awaiting a treatment capability to permit permanent disposal compliant with the Land Disposal Restrictions and; (2) are forecasted to be generated over the next 30 years. The primary sources of waste to be treated at WRAP Module 2A include the currently stored waste from the 183-H solar basin evaporators, secondary solids from the future Hanford site liquid effluent treatment facilities, thermal treatment facility ash, other WRAP modules, and other, miscellaneous waste from storage and onsite/offsite waste generators consisting of compactible and non-compactible solids, contaminated soils, and metals. This volume, Volume 1 provides a narrative of the project background, objective and justification. A description of the WRAP 2A mission, operations and project scope is also included. Significant project requirements such as security, health, safety, decontamination and decomissioning, maintenance, data processing, and quality are outlined. Environmental compliance issues and regulatory permits are identified, and a preliminary safety evaluation is provided

Conceptual design for the Waste Receiving and Processing facility Module 2A

International Nuclear Information System (INIS)

1992-07-01

This is part of a Conceptual Design Report (CDR) for the Waste Receiving and Processing (WRAP) Module 2A facility at the Hanford Reservation. The mission of the facility is to receive, process, package, certify, and ship for permanent burial at the Hanford site disposal facilities those contact handled (CH) low-level radioactive mixed wastes (LLMW) that: (1) are currently in retrievable storage at the Hanford Central Waste Complex (HCWC) awaiting a treatment capability to permit permanent disposal compliant with the Land Disposal Restrictions and; (2) are forecasted to be generated over the next 30 years. The primary sources of waste to be treated include the currently stored waste from the 183-H solar basin evaporators, secondary solids from the future Hanford site liquid effluent treatment facilities, thermal treatment facility ash, other WRAP modules, and other miscellaneous waste from storage and onsite/offsite waste generators consisting of compactible and non-compactible solids, contaminated soils, and metals. This volume, Volume III is a compilation of the outline specifications that will form the basis for development of the Title design construction specifications. This volume contains abbreviated CSI outline specifications for equipment as well as non-equipment related construction and material items. For process and mechanical equipment, data sheets are provided with the specifications which indicate the equipment overall design parameters. This volume also includes a major equipment list

Gas-assisted gravity drainage (GAGD) process for improved oil recovery

Science.gov (United States)

Rao, Dandina N [Baton Rouge, LA

2012-07-10

A rapid and inexpensive process for increasing the amount of hydrocarbons (e.g., oil) produced and the rate of production from subterranean hydrocarbon-bearing reservoirs by displacing oil downwards within the oil reservoir and into an oil recovery apparatus is disclosed. The process is referred to as "gas-assisted gravity drainage" and comprises the steps of placing one or more horizontal producer wells near the bottom of a payzone (i.e., rock in which oil and gas are found in exploitable quantities) of a subterranean hydrocarbon-bearing reservoir and injecting a fluid displacer (e.g., CO.sub.2) through one or more vertical wells or horizontal wells. Pre-existing vertical wells may be used to inject the fluid displacer into the reservoir. As the fluid displacer is injected into the top portion of the reservoir, it forms a gas zone, which displaces oil and water downward towards the horizontal producer well(s).

PROCESS FOR RECOVERY OF URANIUM VALUES FROM IMPURE SOLUTIONS THEREOF

Science.gov (United States)

Kilner, S.B.

1959-11-01

A process is presented for the recovery of uraninm values from impure solutions which are obtained, for example, by washing residual uranium salt or uranium metal deposits from stainless steel surfaces using an aqueous or certain acidic aqueous solutions. The solutions include uranyl and oxidized iron, chromium, nickel, and copper ions and may contain manganese, zinc, and silver ions. In accordance with one procedure. the uranyl ions are reduced to the uranous state, and the impurity ions are complexed with cyanide under acidic conditions. The solution is then treated with ammonium hydroxide or alkali metal hydroxide to precipitate uranous hydroxide away from the complexed impurity ions in the solution. Alternatively, an excess of alkali metal cyanide is added to the reduced solution until the solution becomes sufficiently alkaline for the uranons hydroxide to precipitate. An essential feature in operating the process is in maintaining the pH of the solution sufficiently acid during the complexing operation to prevent the precipitation of the impurity metal hydroxides.

Chemical process for recovery of uranium values contained in phosphoric mineral lixivia

International Nuclear Information System (INIS)

Conceicao, E.L.H. da; Awwal, M.A.; Coelho, S. V.

1980-01-01

A recovery process of uranium values from phosporic mineral lixivia for obtaining uranio oxide concentrate adjusted to specifications of purity for its commercialization the process consists of the adjustment of electromotive force of lixiviem to suitable values for uranium extraction, extraction with organic solvent containing phosphoric acid ester and oxidant reextraction from this solvent with phosphoric acid solution, suggesting a new solvent extraction containing synergetic mixture of di-2-ethyl hexyl phosphoric acid and tri-octyl phosphine, leaching this solvent with water and re-extraction/precipitation with ammonium carbonate solution, resulting in the formation of uranyl tricarbonate and ammonium, that by drying and calcination gives the uranium oxide with purity degree for commercialization. (M.C.K.) [pt

Dynamic Modeling of Process Technologies for Closed-Loop Water Recovery Systems

Science.gov (United States)

Allada, Rama Kumar; Lange, Kevin; Anderson, Molly

2011-01-01

Detailed chemical process simulations are a useful tool in designing and optimizing complex systems and architectures for human life support. Dynamic and steady-state models of these systems help contrast the interactions of various operating parameters and hardware designs, which become extremely useful in trade-study analyses. NASA s Exploration Life Support technology development project recently made use of such models to compliment a series of tests on different waste water distillation systems. This paper presents dynamic simulations of chemical process for primary processor technologies including: the Cascade Distillation System (CDS), the Vapor Compression Distillation (VCD) system, the Wiped-Film Rotating Disk (WFRD), and post-distillation water polishing processes such as the Volatiles Removal Assembly (VRA) that were developed using the Aspen Custom Modeler and Aspen Plus process simulation tools. The results expand upon previous work for water recovery technology models and emphasize dynamic process modeling and results. The paper discusses system design, modeling details, and model results for each technology and presents some comparisons between the model results and available test data. Following these initial comparisons, some general conclusions and forward work are discussed.

Dynamic Modeling of Process Technologies for Closed-Loop Water Recovery Systems

Science.gov (United States)

Allada, Rama Kumar; Lange, Kevin E.; Anderson, Molly S.

2012-01-01

Detailed chemical process simulations are a useful tool in designing and optimizing complex systems and architectures for human life support. Dynamic and steady-state models of these systems help contrast the interactions of various operating parameters and hardware designs, which become extremely useful in trade-study analyses. NASA s Exploration Life Support technology development project recently made use of such models to compliment a series of tests on different waste water distillation systems. This paper presents dynamic simulations of chemical process for primary processor technologies including: the Cascade Distillation System (CDS), the Vapor Compression Distillation (VCD) system, the Wiped-Film Rotating Disk (WFRD), and post-distillation water polishing processes such as the Volatiles Removal Assembly (VRA). These dynamic models were developed using the Aspen Custom Modeler (Registered TradeMark) and Aspen Plus(Registered TradeMark) process simulation tools. The results expand upon previous work for water recovery technology models and emphasize dynamic process modeling and results. The paper discusses system design, modeling details, and model results for each technology and presents some comparisons between the model results and available test data. Following these initial comparisons, some general conclusions and forward work are discussed.

Recovery of copper and water from copper-electroplating wastewater by the combination process of electrolysis and electrodialysis.

Science.gov (United States)

Peng, Changsheng; Liu, Yanyan; Bi, Jingjing; Xu, Huizhen; Ahmed, Abou-Shady

2011-05-30

In this paper, a laboratory-scale process which combined electrolysis (EL) and electrodialysis (ED) was developed to treat copper-containing wastewater. The feasibility of such process for copper recovery as well as water reuse was determined. Effects of three operating parameters, voltage, initial Cu(2+) concentration and water flux on the recovery of copper and water were investigated and optimized. The results showed that about 82% of copper could be recovered from high concentration wastewater (HCW, >400mg/L) by EL, at the optimal conditions of voltage 2.5 V/cm and water flux 4 L/h; while 50% of diluted water could be recycled from low concentration wastewater (LCW, water flux 4 L/h. However, because of the limitation of energy consumption (EC), LCW for EL and HCW for ED could not be treated effectively, and the effluent water of EL and concentrated water of ED should be further treated before discharged. Therefore, the combination process of EL and ED was developed to realize the recovery of copper and water simultaneously from both HCW and LCW. The results of the EL-ED process showed that almost 99.5% of copper and 100% of water could be recovered, with the energy consumption of EL ≈ 3 kW h/kg and ED ≈ 2 kW h/m(3). According to SEM and EDX analysis, the purity of recovered copper was as high as 97.9%. Copyright © 2011 Elsevier B.V. All rights reserved.

Flourishing With Psychosis: A Prospective Examination on the Interactions Between Clinical, Functional, and Personal Recovery Processes on Well-being Among Individuals with Schizophrenia Spectrum Disorders.

Science.gov (United States)

Chan, Randolph C H; Mak, Winnie W S; Chio, Floria H N; Tong, Alan C Y

2017-09-08

Well-being is not just the absence of mental disorder but also involves positive feelings and contentment (emotional well-being), meaningful engagement (psychological well-being), and contribution of one's community or society (social well-being). Recovery processes, which encompass mitigation of clinical symptomatology (clinical recovery), improvement in occupational, social, and adaptive functioning (functional recovery), and development of personally valued goals and identity (personal recovery), have demonstrated to be important markers of well-being. This study examined the relative contribution of clinical, functional, and personal recovery processes on well-being among individuals with schizophrenia and explored the effect of personal recovery on people with varying levels of symptom severity and functional ability. A longitudinal quantitative research design was used in which 181 people with schizophrenia spectrum disorders were assessed at baseline and 6 months. At baseline, 28.2% of the participants were considered as flourishing. Around half of the participants (52.5%) were moderately mentally healthy, while 19.3% were identified as languishing. Results showed that clinical recovery was predictive of better well-being at 6-month postbaseline. Personal recovery was found to positively predict well-being, above and beyond the effects of clinical and functional recovery. Moderation analysis showed that the effect of personal recovery on well-being did not depend on clinical and functional recovery, which implied that people with schizophrenia can participate in the process of personal recovery and enjoy positive well-being regardless of their clinical stability and functional competence. Given the robust salutogenic effect of personal recovery, greater emphasis should be placed on developing person-centered, strength-based, recovery-oriented services. © The Author 2017. Published by Oxford University Press on behalf of the Maryland Psychiatric Research

Conceptual design of jewellery: a space-based aesthetics approach

Directory of Open Access Journals (Sweden)

Tzintzi Vaia

2017-01-01

Full Text Available Conceptual design is a field that offers various aesthetic approaches to generation of nature-based product design concepts. Essentially, Conceptual Product Design (CPD uses similarities based on the geometrical forms and functionalities. Furthermore, the CAD-based freehand sketch is a primary conceptual tool in the early stages of the design process. The proposed Conceptual Product Design concept is dealing with jewelleries that are inspired from space. Specifically, a number of galaxy features, such as galaxy shapes, wormholes and graphical representation of planet magnetic field are used as inspirations. Those space-based design ideas at a conceptual level can lead to further opportunities for research and economic success of the jewellery industry. A number of illustrative case studies are presented and new opportunities can be derived for economic success.