Reconfigurable, Cognitive Software-Defined Radio

Science.gov (United States)

Bhat, Arvind

2015-01-01

Software-defined radio (SDR) technology allows radios to be reconfigured to perform different communication functions without using multiple radios to accomplish each task. Intelligent Automation, Inc., has developed SDR platforms that switch adaptively between different operation modes. The innovation works by modifying both transmit waveforms and receiver signal processing tasks. In Phase I of the project, the company developed SDR cognitive capabilities, including adaptive modulation and coding (AMC), automatic modulation recognition (AMR), and spectrum sensing. In Phase II, these capabilities were integrated into SDR platforms. The reconfigurable transceiver design employs high-speed field-programmable gate arrays, enabling multimode operation and scalable architecture. Designs are based on commercial off-the-shelf (COTS) components and are modular in nature, making it easier to upgrade individual components rather than redesigning the entire SDR platform as technology advances.

Roles and Self-Reconfigurable Robots

DEFF Research Database (Denmark)

Dvinge, Nicolai; Schultz, Ulrik Pagh; Christensen, David Johan

2007-01-01

A self-reconfigurable robot is a robotic device that can change its own shape. Self-reconfigurable robots are commonly built from multiple identical modules that can manipulate each other to change the shape of the robot. The robot can also perform tasks such as locomotion without changing shape......., significantly simplifying the task of programming self-reconfigurable robots. Our language fully supports programming the ATRON self-reconfigurable robot, and has been used to implement several controllers running both on the physical modules and in simulation.......A self-reconfigurable robot is a robotic device that can change its own shape. Self-reconfigurable robots are commonly built from multiple identical modules that can manipulate each other to change the shape of the robot. The robot can also perform tasks such as locomotion without changing shape....... Programming a modular, self-reconfigurable robot is however a complicated task: the robot is essentially a real-time, distributed embedded system, where control and communication paths often are tightly coupled to the current physical configuration of the robot. To facilitate the task of programming modular...

Heterogeneous reconfigurable processors for real-time baseband processing from algorithm to architecture

CERN Document Server

Zhang, Chenxin; Öwall, Viktor

2016-01-01

This book focuses on domain-specific heterogeneous reconfigurable architectures, demonstrating for readers a computing platform which is flexible enough to support multiple standards, multiple modes, and multiple algorithms. The content is multi-disciplinary, covering areas of wireless communication, computing architecture, and circuit design. The platform described provides real-time processing capability with reasonable implementation cost, achieving balanced trade-offs among flexibility, performance, and hardware costs. The authors discuss efficient design methods for wireless communication processing platforms, from both an algorithm and architecture design perspective. Coverage also includes computing platforms for different wireless technologies and standards, including MIMO, OFDM, Massive MIMO, DVB, WLAN, LTE/LTE-A, and 5G. •Discusses reconfigurable architectures, including hardware building blocks such as processing elements, memory sub-systems, Network-on-Chip (NoC), and dynamic hardware reconfigur...

Common tester platform concept.

Energy Technology Data Exchange (ETDEWEB)

Hurst, Michael James

2008-05-01

This report summarizes the results of a case study on the doctrine of a common tester platform, a concept of a standardized platform that can be applicable across the broad spectrum of testing requirements throughout the various stages of a weapons program, as well as across the various weapons programs. The common tester concept strives to define an affordable, next-generation design that will meet testing requirements with the flexibility to grow and expand; supporting the initial development stages of a weapons program through to the final production and surveillance stages. This report discusses a concept investing key leveraging technologies and operational concepts combined with prototype tester-development experiences and practical lessons learned gleaned from past weapons programs.

PCB concentrations and metabolism patterns in common terns (Sterna hirundo) from different breeding colonies in the Netherlands

NARCIS (Netherlands)

Brink, van den N.W.; Bosveld, A.T.C.

2001-01-01

PCB levels in blood of common terns (Sterna hirundo) from Terneuzen, a breeding colony in The Netherlands with relatively low breeding success, were significantly higher than in birds from two Dutch reference colonies, one nearby (Oesterdam) and one further away (the Isle of Griend). However, a

Hardware/software virtualization for the reconfigurable multicore platform.

NARCIS (Netherlands)

Ferger, M.; Al Kadi, M.; Hübner, M.; Koedam, M.L.P.J.; Sinha, S.S.; Goossens, K.G.W.; Marchesan Almeida, Gabriel; Rodrigo Azambuja, J.; Becker, Juergen

2012-01-01

This paper presents the Flex Tiles approach for the virtualization of hardware and software for a reconfigurable multicore architecture. The approach enables the virtualization of a dynamic tile-based hardware architecture consisting of processing tiles connected via a network-on-chip and a

Design of reconfigurable logic controllers

CERN Document Server

Bukowiec, Arkadiusz; Doligalski, Michał; Tkacz, Jacek

2016-01-01

This book presents the original concepts and modern techniques for specification, synthesis, optimisation and implementation of parallel logical control devices. It deals with essential problems of reconfigurable control systems like dependability, modularity and portability. Reconfigurable systems require a wider variety of design and verification options than the application-specific integrated circuits. The book presents a comprehensive selection of possible design techniques. The diversity of the modelling approaches covers Petri nets, state machines and activity diagrams. The preferences of the presented optimization and synthesis methods are not limited to increasing of the efficiency of resource use. One of the biggest advantages of the presented methods is the platform independence, the FPGA devices and single board computers are some of the examples of possible platforms. These issues and problems are illustrated with practical cases of complete control systems. If you expect a new look at the recon...

Modular and reconfigurable common PCB-platform of FPGA based LLRF control system for TESLA test facility

Energy Technology Data Exchange (ETDEWEB)

Pozniak, K.T.; Romaniuk, R.S. [Institute of Electronic Systems, Warsaw (Poland); Kierzkowski, K. [Institute of Experimental Physics, Warsaw (Poland)

2005-07-01

The paper includes a description of predicted functionalities to be implemented in a universal motherboard (MB) for the next generation of LLRF control system for TESLA. The motherboard bases on a number of quasi-autonomous embedded executive modules. The modules are implemented in a few FPGA chips featured by the MB. The paper presents a practical design of the MB. The initial (basic) solution of the MB has the Cyclone as the chip where the board management is embedded. The board features communication modules - VME and micro, single chip PC with Ethernet. The board provides power supply for the FPGA chips. The board has fast internal communication between particular modules. (orig.)

Modular and reconfigurable common PCB-platform of FPGA based LLRF control system for TESLA test facility

International Nuclear Information System (INIS)

Pozniak, K.T.; Romaniuk, R.S.; Kierzkowski, K.

2005-01-01

The paper includes a description of predicted functionalities to be implemented in a universal motherboard (MB) for the next generation of LLRF control system for TESLA. The motherboard bases on a number of quasi-autonomous embedded executive modules. The modules are implemented in a few FPGA chips featured by the MB. The paper presents a practical design of the MB. The initial (basic) solution of the MB has the Cyclone as the chip where the board management is embedded. The board features communication modules - VME and micro, single chip PC with Ethernet. The board provides power supply for the FPGA chips. The board has fast internal communication between particular modules. (orig.)

Evaluation and interconversion of various indicator PCB schemes for ∑PCB and dioxin-like PCB toxic equivalent levels in fish.

Science.gov (United States)

Gandhi, Nilima; Bhavsar, Satyendra P; Reiner, Eric J; Chen, Tony; Morse, Dave; Arhonditsis, George B; Drouillard, Ken G

2015-01-06

Polychlorinated biphenyls (PCBs) remain chemicals of concern more than three decades after the ban on their production. Technical mixture-based total PCB measurements are unreliable due to weathering and degradation, while detailed full congener specific measurements can be time-consuming and costly for large studies. Measurements using a subset of indicator PCBs (iPCBs) have been considered appropriate; however, inclusion of different PCB congeners in various iPCB schemes makes it challenging to readily compare data. Here, using an extensive data set, we examine the performance of existing iPCB3 (PCB 138, 153, and 180), iPCB6 (iPCB3 plus 28, 52, and 101) and iPCB7 (iPCB6 plus 118) schemes, and new iPCB schemes in estimating total of PCB congeners (∑PCB) and dioxin-like PCB toxic equivalent (dlPCB-TEQ) concentrations in sport fish fillets and the whole body of juvenile fish. The coefficients of determination (R(2)) for regressions conducted using logarithmically transformed data suggest that inclusion of an increased number of PCBs in an iPCB improves relationship with ∑PCB but not dlPCB-TEQs. Overall, novel iPCB3 (PCB 95, 118, and 153), iPCB4 (iPCB3 plus 138) and iPCB5 (iPCB4 plus 110) presented in this study and existing iPCB6 and iPCB7 are the most optimal indicators, while the current iPCB3 should be avoided. Measurement of ∑PCB based on a more detailed analysis (50+ congeners) is also overall a good approach for assessing PCB contamination and to track PCB origin in fish. Relationships among the existing and new iPCB schemes have been presented to facilitate their interconversion. The iPCB6 equiv levels for the 6.5 and 10 pg/g benchmarks of dlPCB-TEQ05 are about 50 and 120 ng/g ww, respectively, which are lower than the corresponding iPCB6 limits of 125 and 300 ng/g ww set by the European Union.

Microbial decomposition of PCB. PCB no biseibutsu bunkai

Energy Technology Data Exchange (ETDEWEB)

Furukawa, K [Kyushu University, Fukuoka (Japan). Faculty of Agriculture

1993-08-01

This paper generalizes knowledges acquired so far on bio-remediation of PCB. Aerobic PCB decomposition using soil bacteria generally goes through introduction of O2 into second and third orders of a biphenyl ring, ring cleavage, and hydrolysis, and generates benzoate finally. PCB that is decomposed in this 2, 3-dioxygenaze path requires at least one of the second and third orders to be open. The decomposition through this path becomes difficult when the number of displaced Cl increases, and PCB with Cl displaced in only one of the rings decomposes more easily than PCB with the same number of Cl in both rings. A group in GE, Inc. has searched for two kinds of bacteria stocks that introduce O2 preferentially into the third and fourth orders. These stocks decompose third and fourth ordered open high-chlorine PCB. Groups in GE, Inc. and other companies have isolated bacteria that dechlorinate PCB decreasingly under an anaerobic condition. These bacteria desorb metha-ordered chlorine. Discussions are being made on cloning of PCB decomposing genes, and breeding of decomposing bacteria that have wide PCB decomposing spectra. 22 refs., 8 figs., 2 tabs.

Influence of a combination of two tetrachlorobiphenyl congeners (PCB 47; PCB 77) on thyroid status, choline acetyltransferase (ChAT) activity, and short- and long-term memory in 30-day-old Sprague-Dawley rats

International Nuclear Information System (INIS)

Donahue, Douglas A.; Dougherty, Edward J.; Meserve, Lee A.

2004-01-01

The important role of thyroid hormones in growth and development, maintenance of body temperature, digestion, cardiac function, and normal brain development can be disrupted by environmental contaminants like polychlorinated biphenyls (PCB). Polychlorinated biphenyls are environmental contaminants that are widespread, persistent, lipophilic, and bioaccumulate through food webs, concentrating in adipose tissue. Placental and lactational PCB exposure of offspring causes metabolic and endocrine disruptions including hypothyroxinemia, spatial learning and memory deficits, neurochemical and neurobehavioral alterations, and reproductive problems. Previous studies in our lab using the individual congeners PCB 47 (2,2',4,4'-tetrachlorobiphenyl, ortho-substituted) and PCB 77 (3,3',4,4'-tetrachlorobiphenyl, non-ortho-substituted) have demonstrated alterations in thyroid hormone levels, alterations in brain choline acetyltransferase (ChAT) activity, and spatial learning deficits. In the present study, pregnant Sprague-Dawley rats were fed a diet with or without a mixture of PCB 47/77 at 1.25 ppm, 12.5 ppm or 25.0 ppm (w/w). Rat pups were swum in the Morris water maze four times a day on days 21-29 in order for the animals to learn the position of a submerged fixed platform. A probe test was run on day 24 (30 min after last swim) for short-term memory, and on day 29 (24 h after the last swim) for long-term memory after removal of the platform. Time spent in the quadrant previously containing the platform was recorded. Rats were decapitated on day 30, serum collected and frozen at -20 deg. ChAT activity was measured radiometrically in basal forebrain and hippocampus. All PCB-treated animals experienced a depression in both triiodothyronine (T 3 ) and thyroxine (T 4 ). The present study found that all doses of PCB depressed ChAT activity in hippocampus with no significant alteration in the basal forebrain. In PCB-treated animals, short-term memory showed a trend toward

Miniaturized Printed Inverted-F Antenna for Internet of Things: A Design on PCB with a Meandering Line and Shorting Strip

Directory of Open Access Journals (Sweden)

Cheuk Yin Cheung

2018-01-01

Full Text Available This paper focuses on a printed inverted-F antenna (PIFA with meandering line and meandering shorting strip under 2.4 GHz industrial, scientific, and medical (ISM band for Internet of things (IoT applications. Bluetooth Low Energy (BLE technology is one of potential platforms and technologies for IoT applications under ISM band. Printed circuit board (PCB antenna commonly used in commercial and medical applications because of its small size, low profile, and low cost compared to low temperature cofired ceramic (LTCC technology. The proposed structure of PIFA is implemented on PCB to gain all these advantages. Replacing conventional PCB line in PIFA by the meandering line and meandering shorting strip improves the efficiency of the PIFA as well as the bandwidth. As a case study, design and measurement results of the proposed PIFA are presented.

Reconfigurable Multicore Architectures for Streaming Applications

NARCIS (Netherlands)

Smit, Gerardus Johannes Maria; Kokkeler, Andre B.J.; Rauwerda, G.K.; Jacobs, J.W.M.; Nicolescu, G.; Mosterman, P.J.

2009-01-01

This chapter addresses reconfigurable heterogenous and homogeneous multicore system-on-chip (SoC) platforms for streaming digital signal processing applications, also called DSP applications. In streaming DSP applications, computations can be specified as a data flow graph with streams of data items

Análisis Cinemático de un Novedoso Robot Paralelo Reconfigurable

Directory of Open Access Journals (Sweden)

Róger E. Sánchez-Alonso

2016-04-01

Full Text Available Resumen: Este trabajo presenta el análisis cinemático de un manipulador reconfigurable integrado por dos sub-manipuladores paralelos que comparten una plataforma móvil. Una solución en forma semi-cerrada para el análisis directo de posición del robot es obtenida tomando ventaja de la geometría no plana de la plataforma móvil, mientras que los análisis de velocidad, aceleración y singularidades son desarrollados por medio de teoría de tornillos. Finalmente se propone una aproximación basada en el índice de manipulabilidad de la matriz jacobiana para determinar la configuración geométrica que optimiza el desempeño del manipulador dada una determinada postura de la plataforma móvil. Abstract: This work presents the kinematic analysis of a reconfigurable manipulator composed of two parallel sub-manipulators that share a common moving platform. A semi-closed form solution is easily obtained to solve the forward displacement analysis of the robot taking advantage of the non-planar geometry of the moving platform, while the velocity, acceleration and singularity analyses are developed by resorting to screw theory. Finally a very practical approach based on the manipulability index of the jacobian matrix of the robot is proposed in order to determine the geometric configuration that optimizes the performance of the manipulator given a pose of the moving platform. Palabras clave: Robot paralelo, Reconfiguración, Cinemática, Teoría de tornillos, Matriz jacobiana, Índice de manipulabilidad., Keywords: Parallel robot, Reconfiguration, Kinematics, Screw theory, Jacobian matrix, Manipulability index.

The VIPER project (Visualization Integration Platform for Exploration Research): a biologically inspired autonomous reconfigurable robotic platform for diverse unstructured environments

Science.gov (United States)

Schubert, Oliver J.; Tolle, Charles R.

2004-09-01

Over the last decade the world has seen numerous autonomous vehicle programs. Wheels and track designs are the basis for many of these vehicles. This is primarily due to four main reasons: a vast preexisting knowledge base for these designs, energy efficiency of power sources, scalability of actuators, and the lack of control systems technologies for handling alternate highly complex distributed systems. Though large efforts seek to improve the mobility of these vehicles, many limitations still exist for these systems within unstructured environments, e.g. limited mobility within industrial and nuclear accident sites where existing plant configurations have been extensively changed. These unstructured operational environments include missions for exploration, reconnaissance, and emergency recovery of objects within reconfigured or collapsed structures, e.g. bombed buildings. More importantly, these environments present a clear and present danger for direct human interactions during the initial phases of recovery operations. Clearly, the current classes of autonomous vehicles are incapable of performing in these environments. Thus the next generation of designs must include highly reconfigurable and flexible autonomous robotic platforms. This new breed of autonomous vehicles will be both highly flexible and environmentally adaptable. Presented in this paper is one of the most successful designs from nature, the snake-eel-worm (SEW). This design implements shape memory alloy (SMA) actuators which allow for scaling of the robotic SEW designs from sub-micron scale to heavy industrial implementations without major conceptual redesigns as required in traditional hydraulic, pneumatic, or motor driven systems. Autonomous vehicles based on the SEW design posses the ability to easily move between air based environments and fluid based environments with limited or no reconfiguration. Under a SEW designed vehicle, one not only achieves vastly improved maneuverability within a

Computing platforms for software-defined radio

CERN Document Server

Nurmi, Jari; Isoaho, Jouni; Garzia, Fabio

2017-01-01

This book addresses Software-Defined Radio (SDR) baseband processing from the computer architecture point of view, providing a detailed exploration of different computing platforms by classifying different approaches, highlighting the common features related to SDR requirements and by showing pros and cons of the proposed solutions. Coverage includes architectures exploiting parallelism by extending single-processor environment (such as VLIW, SIMD, TTA approaches), multi-core platforms distributing the computation to either a homogeneous array or a set of specialized heterogeneous processors, and architectures exploiting fine-grained, coarse-grained, or hybrid reconfigurability. Describes a computer engineering approach to SDR baseband processing hardware; Discusses implementation of numerous compute-intensive signal processing algorithms on single and multicore platforms; Enables deep understanding of optimization techniques related to power and energy consumption of multicore platforms using several basic a...

Modular reconfigurable machines incorporating modular open architecture control

CSIR Research Space (South Africa)

Padayachee, J

2008-01-01

Full Text Available degrees of freedom on a single platform. A corresponding modular Open Architecture Control (OAC) system is presented. OAC overcomes the inflexibility of fixed proprietary automation, ensuring that MRMs provide the reconfigurability and extensibility...

From stretchable to reconfigurable inorganic electronics

KAUST Repository

Nassar, Joanna M.

2016-05-06

Today’s state-of-the-art electronics are high performing, energy efficient, multi-functional and cost effective. However, they are also typically rigid and brittle. With the emergence of the Internet of Everything, electronic applications are expanding into previously unexplored areas, like healthcare, smart wearable artifacts, and robotics. One major challenge is the physical asymmetry of target application surfaces, which often cause mechanical stretching, contracting, twisting and other deformations to the application. In this review paper, we explore materials, processes, mechanics and devices that enable physically stretchable and reconfigurable electronics. While the concept of stretchable electronics is commonly used in practice, the notion of physically reconfigurable electronics is still in its infancy. Because organic materials are commonly naturally stretchable and physically deformable, we predominantly focus on electronics made from inorganic materials that have the capacity for physical stretching and reconfiguration while retaining their intended attributes. We emphasize how applications of electronics dictate theory to integration strategy for stretchable and reconfigurable inorganic electronics.

Design Flow Instantiation for Run-Time Reconfigurable Systems: A Case Study

Directory of Open Access Journals (Sweden)

Yang Qu

2007-12-01

Full Text Available Reconfigurable system is a promising alternative to deliver both flexibility and performance at the same time. New reconfigurable technologies and technology-dependent tools have been developed, but a complete overview of the whole design flow for run-time reconfigurable systems is missing. In this work, we present a design flow instantiation for such systems using a real-life application. The design flow is roughly divided into two parts: system level and implementation. At system level, our supports for hardware resource estimation and performance evaluation are applied. At implementation level, technology-dependent tools are used to realize the run-time reconfiguration. The design case is part of a WCDMA decoder on a commercially available reconfigurable platform. The results show that using run-time reconfiguration can save over 40% area when compared to a functionally equivalent fixed system and achieve 30 times speedup in processing time when compared to a functionally equivalent pure software design.

Trajectory Generation and Stability Analysis for Reconfigurable Klann Mechanism Based Walking Robot

Directory of Open Access Journals (Sweden)

Jaichandar Kulandaidaasan Sheba

2016-06-01

Full Text Available Reconfigurable legged robots based on one degree of freedom are highly desired because they are effective on rough and irregular terrains and they provide mobility in such terrain with simple control schemes. It is necessary that reconfigurable legged robots should maintain stability during rest and motion, with a minimum number of legs while maintaining their full range of walking patterns resulting from different gait configuration. In this paper we present a method to generate input trajectory for reconfigurable quadruped robots based on Klann mechanism to properly synchronize movement. Six useful gait cycles based on this reconfigurable Klann mechanism for quadruped robots has been clearly shown here. The platform stability for these six useful gait cycles are validated through simulated results which clearly shows the capabilities of reconfigurable design.

RECONFIGURABLE PRODUCT ROUTING AND CONTROL FOR MASS CUSTOMISATION MANUFACTURING

Directory of Open Access Journals (Sweden)

A. J. Walker

2012-01-01

Full Text Available

ENGLISH ABSTRACT:Reconfigurable control of flexible manufacturing systems can allow for the efficient and responsive production of customised product instances. This can aid in providing make-to-order business models for various small- to medium-sized enterprises in South Africa, and provide competitive advantage in a dynamic global marketplace. Reconfigurable control application requires an understanding of the modes of production variability in mass customisation manufacturing. Temporally uncorrelated workflow routings are considered as one of these production variability modes. In this light, this paper addresses the flexible material payload routing problem, and presents a mobile robot platform that has been developed to research and design reconfigurable routing systems.

AFRIKAANSE OPSOMMING:Verstelbare beheer van aanpasbare vervaardigingstelsels kan die doeltreffende en reaktiewe produksie van doelgemaakte produkeksemplare toelaat. Hierdie beheer kan assisteer in die voorsiening van vervaardig-na-bestellingbesigheidsmodelle aan ’n aantal klein- tot medium-grootte ondernemings in Suid-Afrika, en aan hulle ’n kompeterende voorsprong bied in ’n dinamiese globale mark. Die instelling van verstelbare beheer vereis dat die modi van produkveranderlikheid in massa verbruikersaanpassingsvervaardiging verstaan word. Hierdie artikel spreek die probleem van aanpasbare roetebepaling van materiaalvragte in massa verbruikersaanpassingsvervaardiging aan. ’n Mobiele robot-platform, ontwikkel vir navorsing in verstelbare roetebepalingstelsels, word ook voorgelê.

Serum PCB levels and congener profiles among teachers in PCB-containing schools: a pilot study

Science.gov (United States)

2011-01-01

Background PCB contamination in the built environment may result from the release of PCBs from building materials. The significance of this contamination as a pathway of human exposure is not well-characterized, however. This research compared the serum PCB concentrations, and congener profiles between 18 teachers in PCB-containing schools and referent populations. Methods Blood samples from 18 teachers in PCB-containing schools were analyzed for 57 PCB congeners. Serum PCB concentrations and congener patterns were compared between the teachers, to the 2003-4 NHANES (National Health and Nutrition Examination Survey) data, and to data from 358 Greater Boston area men. Results Teachers at one school had higher levels of lighter (PCB 6-74) congeners compared to teachers from other schools. PCB congener 47 contributed substantially to these elevated levels. Older teachers (ages 50-64) from all schools had higher total (sum of 33 congeners) serum PCB concentrations than age-comparable NHANES reference values. Comparing the teachers to the referent population of men from the Greater Boston area (all under age 51), no difference in total serum PCB levels was observed between the referents and teachers up to 50 years age. However, the teachers had significantly elevated serum concentrations of lighter congeners (PCB 6-74). This difference was confirmed by comparing the congener-specific ratios between groups, and principal component analysis showed that the relative contribution of lighter congeners differed between the teachers and the referents. Conclusions These findings suggest that the teachers in the PCB-containing buildings had higher serum levels of lighter PCB congeners (PCB 6-74) than the referent populations. Examination of the patterns, as well as concentrations of individual PCB congeners in serum is essential to investigating the contributions from potential environmental sources of PCB exposure. PMID:21668970

A Web-Based Integration Procedure for the Development of Reconfigurable Robotic Work-Cells

Directory of Open Access Journals (Sweden)

Paulo Ferreira

2013-07-01

Full Text Available Concepts related to the development of reconfigurable manufacturing systems (RMS and methodologies to provide the best practices in the processing industry and factory automation, such as system integration and web-based technology, are major issues in designing next-generation manufacturing systems (NGMS. Adaptable and integrable devices are crucial for the success of NGMS. In robotic cells the integration of manufacturing components is essential to accelerate system adaptability. Sensors, control architectures and communication technologies have contributed to achieving further agility in reconfigurable factories. In this work a web-based robotic cell integration procedure is proposed to aid the identification of reconfigurable issues and requirements. This methodology is applied to an industrial robot manipulator to enhance system flexibility towards the development of a reconfigurable robotic platform.

Evaluation of a reconfigurable portable instrument for copper determination based on luminescent carbon dots.

Science.gov (United States)

Salinas-Castillo, Alfonso; Morales, Diego P; Lapresta-Fernández, Alejandro; Ariza-Avidad, María; Castillo, Encarnación; Martínez-Olmos, Antonio; Palma, Alberto J; Capitan-Vallvey, Luis Fermin

2016-04-01

A portable reconfigurable platform for copper (Cu(II)) determination based on luminescent carbon dot (Cdots) quenching is described. The electronic setup consists of a light-emitting diode (LED) as the carbon dot optical exciter and a photodiode as a light-to-current converter integrated in the same instrument. Moreover, the overall analog conditioning is simply performed with one integrated solution, a field-programmable analog array (FPAA), which makes it possible to reconfigure the filter and gain stages in real time. This feature provides adaptability to use the platform as an analytical probe for carbon dots coming from different batches with some variations in luminescence characteristics. The calibration functions obtained that fit a modified Stern-Volmer equation were obtained using luminescence signals from Cdots quenching by Cu(II). The analytical applicability of the reconfigurable portable instrument for Cu(II) using Cdots has been successfully demonstrated in tap water analysis.

Multi-criteria grey relational approach to evaluating reconfigurable manufacturing configurations

Directory of Open Access Journals (Sweden)

Rehman, A. U.

2017-05-01

Full Text Available In response to highly dynamic markets, manufacturing industries need alternative feasible manufacturing strategies. The strategy currently adopted is to reconfigure the existing manufacturing system. The conditions to reconfigure existing configurations change from time to time. An attempt is made to identify and apply an approach to evaluate these configurations. The paper proposes a grey relational decision-making approach. The approach takes into account multiple performance measures. The ProModel 6.2 simulation platform is adopted to examine the performance of each feasible alternative manufacturing configuration.

Common Ambient Assisted Living Home Platform for Seamless Care

DEFF Research Database (Denmark)

Wagner, Stefan Rahr; Stenner, Rene; Memon, Mukhtiar

The CareStore project is investigating the feasibility of creating an open and flexible infrastructure for facilitating seamless deployment of assisted living devices and applications on heterogeneous platforms. The Common Ambient Assisted Living Home Platform (CAALHP) is intended to be the main ...

SmartApps: Middle-ware for Adaptive Applications on Reconfigurable Platforms

Energy Technology Data Exchange (ETDEWEB)

Lawrence Rauchwerger

2009-08-09

There are several reasons why the performance of current distributed and heterogeneous systems is often disappointing. For example, the characteristics of the application may be input sensitive and evolve during execution causing dramatic changes in memory reference patterns, resource requirements, or degree of concurrency between different phases of the computation. Or, the system may change dynamically with nodes failing or appearing, some network links severed and other links established with different latencies and bandwidths. Another important reason for poor performance is the fairly compartmentalized approach to optimization: applications, compilers, operating systems and hardware configurations are designed and optimized in isolation and without the knowledge of instance specific information and needs of a running application. There is too little information flow across these boundaries and no global optimization is even attempted. For example, most operating systems services like paging, virtual-to-physical page mapping, I/O, or data layout in disks, provide little or no application customization. Similarly, the off-the-shelf hardware used by most commercial systems is optimized to give best average-case performance. To address this problem, we have proposed application-centric computing, or Smart Applications (SAS). In the SAS executable, the compiler embeds most run-time system services, and a performance-optimizing feedback loop that monitors the application's performance and adaptively reconfigures the application and the OS/system platform. At run-time, after incorporating the code's input and determining the system's resources and state, the SAS performs an *instance* specific optimization, which is more tractable than a global generic optimization between application, OS and system. The overriding philosophy of SAS is ``measure, compare, and adapt if beneficial.'' That is, the application will continually monitor its

A Controller for Dynamic Partial Reconfiguration in FPGA-Based Real-Time Systems

DEFF Research Database (Denmark)

Pezzarossa, Luca; Schoeberl, Martin; Sparsø, Jens

2017-01-01

-source DPR controller specially developed for hard real-time systems and prototyped in connection with the open-source multi-core platform for real-time applications T-CREST. The controller enables a processor to perform reconfiguration in a time-predictable manner and supports different operating modes......In real-time systems, the use of hardware accelerators can lead to a worst-case execution-time speed-up, to a simplification of its analysis, and to a reduction of its pessimism. When using FPGA technology, dynamic partial reconfiguration (DPR) can be used to minimize the area, by only loading....... The paper also presents a software tool for bitstream conversion, compression, and for reconfiguration time analysis. The DPR controller is evaluated in terms of hardware cost, operating frequency, speed, and bitstream compression ratio vs. reconfiguration time trade-off. A simple application example...

PCB138, but not PCB153 and PCB180, acts as a weak antiandrogen in vitro

DEFF Research Database (Denmark)

Vinggaard, A.M.; Bonefeld-Jørgensen, Eva Cecilie

2000-01-01

The polychlorinated biphenyls (PCBs) constitute a group of persistent environmental chemicals including 209 possible congeners exhibiting a variety of chlorine substitution patterns. Due to their lipophilic nature and resistance toward biotransformation, PCBs accumulate in the food chain and all...... environmental matrixes including human adipose tissue, blood and milk. In most biological extracts PCB#138 (2,2',3,4,4',5-hexaCB), PCB#153 (2,2',4,4',5,5'-hexaCB), and PCB#180 (2,2',3,4,4',5,5'-heptaCB) are the dominating components. Depending on the position and number of chlorine substitutions, different...... classes of PCB congeners elicit a complex spectrum of biological and toxic responses in in vivo and in vitro models. Some PCBs exert dioxin-like activities mediated through the aryl hydrocarbon receptor (Ah receptor) giving rise to health risk such as organ toxicity and carcinogenesis. Although reports...

Multimode Communication Protocols Enabling Reconfigurable Radios

Directory of Open Access Journals (Sweden)

Berlemann Lars

2005-01-01

Full Text Available This paper focuses on the realization and application of a generic protocol stack for reconfigurable wireless communication systems. This focus extends the field of software-defined radios which usually concentrates on the physical layer. The generic protocol stack comprises common protocol functionality and behavior which are extended through specific parts of the targeted radio access technology. This paper considers parameterizable modules of basic protocol functions residing in the data link layer of the ISO/OSI model. System-specific functionality of the protocol software is realized through adequate parameterization and composition of the generic modules. The generic protocol stack allows an efficient realization of reconfigurable protocol software and enables a completely reconfigurable wireless communication system. It is a first step from side-by-side realized, preinstalled modes in a terminal towards a dynamic reconfigurable anymode terminal. The presented modules of the generic protocol stack can also be regarded as a toolbox for the accelerated and cost-efficient development of future communication protocols.

The Engineering Of PCB Processing Machine

International Nuclear Information System (INIS)

Handoyo, Demon; Satmoko, Ari; T, Sapta; Heru, G. B.

2001-01-01

The engineering of PCB processing machine had been done. Purposes of the engineering of PCB processing machine are used to process PCB and to get the data's of characteristic of PCB processing. Further, these data's will be used as setting point when processing of PCB is done with manual and automatic control. The method of processing of PCB are inserting and pulling of the PCB rack to and from Ferro chlorite using electrical motor to corrosive Cu shield parts witch is not used. The experiment have result that the characteristic of operation of PCB processing machine as we hope when designing

Reconfigurable microfluidic platform in ice

OpenAIRE

Varejka, M.

2008-01-01

Microfluidic devices are popular tools in the biotechnology industry where they provide smaller reagent requirements, high speed of analysis and the possibility for automation. The aim of the project is to make a flexible biocompatible microfluidic platform adapted to different specific applications, mainly analytical and separations which parameters and configuration can be changed multiple times by changing corresponding computer programme. The current project has been sup...

Postnatal exposure to PCB 153 and PCB 180, but not to PCB 52, produces changes in activity level and stimulus control in outbred male Wistar Kyoto rats

Directory of Open Access Journals (Sweden)

Walaas S

2011-05-01

Full Text Available Abstract Background Polychlorinated biphenyls (PCBs are a class of organic compounds that bioaccumulate due to their chemical stability and lipophilic properties. Humans are prenatally exposed via trans-placental transfer, through breast milk as infants, and through fish, seafood and fatty foods as adolescents and adults. Exposure has several reported effects ranging from developmental abnormalities to cognitive and motor deficiencies. In the present study, three experimental groups of rats were orally exposed to PCBs typically found in human breast milk and then behaviorally tested for changes in measures of stimulus control (percentage lever-presses on the reinforcer-producing lever, activity level (responses with IRTs > 0.67 s, and responses with short IRTs ( Methods Male offspring from Wistar Kyoto (WKY/NTac dams purchased pregnant from Taconic Farms (Germantown, NY were orally given PCB at around postnatal day 8, 14, and 20 at a dose of 10 mg/kg body weight at each exposure. Three experimental groups were exposed either to PCB 52, PCB 153, or PCB 180. A fourth group fed corn oil only served as controls. From postnatal day 25, for 33 days, the animals were tested for behavioral changes using an operant procedure. Results PCB exposure did not produce behavioral changes during training when responding was frequently reinforced using a variable interval 3 s schedule. When correct responses were reinforced on a variable interval 180 s schedule, animals exposed to PCB 153 or PCB 180 were less active than controls and animals exposed to PCB 52. Stimulus control was better in animals exposed to PCB 180 than in controls and in the PCB 52 group. Also, the PCB 153 and PCB 180 groups had fewer responses with short IRTs than the PCB 52 group. No effects of exposure to PCB 52 were found when compared to controls. Conclusions Exposure to PCBs 153 and 180 produced hypoactivity that continued at least five weeks after the last exposure. No effects of

Reconfigurable Three-Dimensional Gold Nanorod Plasmonic Nanostructures Organized on DNA Origami Tripod.

Science.gov (United States)

Zhan, Pengfei; Dutta, Palash K; Wang, Pengfei; Song, Gang; Dai, Mingjie; Zhao, Shu-Xia; Wang, Zhen-Gang; Yin, Peng; Zhang, Wei; Ding, Baoquan; Ke, Yonggang

2017-02-28

Distinct electromagnetic properties can emerge from the three-dimensional (3D) configuration of a plasmonic nanostructure. Furthermore, the reconfiguration of a dynamic plasmonic nanostructure, driven by physical or chemical stimuli, may generate a tailored plasmonic response. In this work, we constructed a 3D reconfigurable plasmonic nanostructure with controllable, reversible conformational transformation using bottom-up DNA self-assembly. Three gold nanorods (AuNRs) were positioned onto a reconfigurable DNA origami tripod. The internanorod angle and distance were precisely tuned through operating the origami tripod by toehold-mediated strand displacement. The transduction of conformational change manifested into a controlled shift of the plasmonic resonance peak, which was studied by dark-field microscopy, and agrees well with electrodynamic calculations. This new 3D plasmonic nanostructure not only provides a method to study the plasmonic resonance of AuNRs at prescribed 3D conformations but also demonstrates that DNA origami can serve as a general self-assembly platform for constructing various 3D reconfigurable plasmonic nanostructures with customized optical properties.

Distinguishing Reconfiguration and Compound-cue Retrieval in Task Switching

Directory of Open Access Journals (Sweden)

Gordon D Logan

2010-10-01

Full Text Available Many researchers claim that task switching requires reconfiguration of the cognitive system. Others claim that task switching involves cue-based memory retrieval processes and not reconfiguration. We evaluate these competing claims by developing both reconfiguration and cue-based memory models in a common theoretical framework and by fitting the models to' target functions', which show how performance on individual target stimuli varies depending on the task subjects perform on the targets. Our analyses show that the process of compound-cue retrieval – using the task cue and the target as joint retrieval cues to select a response from memory – is sufficient to explain target functions for parity and magnitude judgments of digits and that reconfiguration does not seem to add anything to the explanation. We address the generality of this conclusion and speculate about the conditions under which reconfiguration may be necessary for task switching.

Towards Python-based Domain-specific Languages for Self-reconfigurable Modular Robotics Research

DEFF Research Database (Denmark)

Moghadam, Mikael; Johan Christensen, David; Brandt, David

2013-01-01

This paper explores the role of operating system and high-level languages in the development of software and domain-specific languages (DSLs) for self-reconfigurable robotics. We review some of the current trends in self-reconfigurable robotics and describe the development of a software system...... for ATRON II which utilizes Linux and Python to significantly improve software abstraction and portability while providing some basic features which could prove useful when using Python, either stand-alone or via a DSL, on a self-reconfigurable robot system. These features include transparent socket...... communication, module identification, easy software transfer and reliable module-to-module communication. The end result is a software platform for modular robots that where appropriate builds on existing work in operating systems, virtual machines, middleware and high-level languages....

An Overview of Reconfigurable Hardware in Embedded Systems

Directory of Open Access Journals (Sweden)

Wenyin Fu

2006-09-01

Full Text Available Over the past few years, the realm of embedded systems has expanded to include a wide variety of products, ranging from digital cameras, to sensor networks, to medical imaging systems. Consequently, engineers strive to create ever smaller and faster products, many of which have stringent power requirements. Coupled with increasing pressure to decrease costs and time-to-market, the design constraints of embedded systems pose a serious challenge to embedded systems designers. Reconfigurable hardware can provide a flexible and efficient platform for satisfying the area, performance, cost, and power requirements of many embedded systems. This article presents an overview of reconfigurable computing in embedded systems, in terms of benefits it can provide, how it has already been used, design issues, and hurdles that have slowed its adoption.

System-level tools and reconfigurable computing for next-generation HWIL systems

Science.gov (United States)

Stark, Derek; McAulay, Derek; Cantle, Allan J.; Devlin, Malachy

2001-08-01

Previous work has been presented on the creation of computing architectures called DIME, which addressed the particular computing demands of hardware in the loop systems. These demands include low latency, high data rates and interfacing. While it is essential to have a capable platform for handling and processing of the data streams, the tools must also complement this so that a system's engineer is able to construct their final system. The paper will present the work in the area of integration of system level design tools, such as MATLAB and SIMULINK, with a reconfigurable computing platform. This will demonstrate how algorithms can be implemented and simulated in a familiar rapid application development environment before they are automatically transposed for downloading directly to the computing platform. This complements the established control tools, which handle the configuration and control of the processing systems leading to a tool suite for system development and implementation. As the development tools have evolved the core-processing platform has also been enhanced. These improved platforms are based on dynamically reconfigurable computing, utilizing FPGA technologies, and parallel processing methods that more than double the performance and data bandwidth capabilities. This offers support for the processing of images in Infrared Scene Projectors with 1024 X 1024 resolutions at 400 Hz frame rates. The processing elements will be using the latest generation of FPGAs, which implies that the presented systems will be rated in terms of Tera (1012) operations per second.

Co-exposure to an ortho-substituted PCB (PCB 153) and methylmercury enhances developmental neurotoxic effects

Energy Technology Data Exchange (ETDEWEB)

Fischer, C.; Fredriksson, A.; Eriksson, P. [Dept. Environment. Toxicol., Uppsala Univ. (Sweden)

2004-09-15

In our environment there are innumerable hazardous contaminants. Many of these compounds are the well-known persistent organic pollutants (POPs) like PCB and DDT. Another persistent agent in our environment is methylmercury (MeHg). These agents are known to be neurotoxic in laboratory animals and humans. Fetuses and neonates are known to be high-risk groups for exposure to these agents. A naturally occurring circumstance is the exposure to a combination of different persistent compounds. The knowledge of interaction between different toxic agents during development is sparse. In several studies we have shown that low-dose exposure of environmental toxic agents such as PCBs, DDT, BFRs (brominated flame retardants) as well as well-known neurotoxic agents such as nicotine, organophosphorous compounds and 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP), during the ''BGS'', in neonatal mice can lead to disruption of the adult brain function, and to an increased susceptibility to toxic agents as adults. Our studies concerning developmental neurotoxic effects after neonatal exposure to single PCB congeners have shown that some orthosubstituted PCBs (such as PCB 28, PCB 52, PCB 153) and some co-planar PCBs (such as PCB 77, PCB 126, PCB 169) cause derangement of adult behaviour that can worsen with age. Furthermore, the cholinergic receptors in the brain were also found to be affected8. Just recently we have seen that neonatal co-exposure to an ortho-substituted PCB, 2,2',5,5'-tetrachlorobiphenyl (PCB 52), together with a brominated flame retardant, 2,2',4,4',5-pentabromodiphenylether (PBDE 99), can enhance developmental neurotoxic effects when the exposure occurs during a critical stage of neonatal brain development. The present study was carried out in order to see whether PCB and MeHg could interact to cause enhanced developmental neurotoxic effects on spontaneous behaviour and habituation capability when given to neonatal mice.

Estimating dermal transfer from PCB-contaminated porous surfaces.

Science.gov (United States)

Slayton, T M; Valberg, P A; Wait, A D

1998-06-01

Health risks posed by dermal contact with PCB-contaminated porous surfaces have not been directly demonstrated and are difficult to estimate indirectly. Surface contamination by organic compounds is commonly assessed by collecting wipe samples with hexane as the solvent. However, for porous surfaces, hexane wipe characterization is of limited direct use when estimating potential human exposure. Particularly for porous surfaces, the relationship between the amount of organic material collected by hexane and the amount actually picked up by, for example, a person's hand touch is unknown. To better mimic PCB pickup by casual hand contact with contaminated concrete surfaces, we used alternate solvents and wipe application methods that more closely mimic casual dermal contact. Our sampling results were compared to PCB pickup using hexane-wetted wipes and the standard rubbing protocol. Dry and oil-wetted samples, applied without rubbing, picked up less than 1% of the PCBs picked up by the standard hexane procedure; with rubbing, they picked up about 2%. Without rubbing, saline-wetted wipes picked up 2.5%; with rubbing, they picked up about 12%. While the nature of dermal contact with a contaminated surface cannot be perfectly reproduced with a wipe sample, our results with alternate wiping solvents and rubbing methods more closely mimic hand contact than the standard hexane wipe protocol. The relative pickup estimates presented in this paper can be used in conjunction with site-specific PCB hexane wipe results to estimate dermal pickup rates at sites with PCB-contaminated concrete.

Synthesis of blind source separation algorithms on reconfigurable FPGA platforms

Science.gov (United States)

Du, Hongtao; Qi, Hairong; Szu, Harold H.

2005-03-01

-Specific Integrated Circuit (ASIC) using standard-height cells. ICA is an algorithm that can solve BSS problems by carrying out the all-order statistical, decorrelation-based transforms, in which an assumption that neighborhood pixels share the same but unknown mixing matrix A is made. In this paper, we continue our investigation on the design challenges of firmware approaches to smart algorithms. We think two levels of parallelization can be explored, including pixel-based parallelization and the parallelization of the restoration algorithm performed at each pixel. This paper focuses on the latter and we use ICA as an example to explain the design and implementation methods. It is well known that the capacity constraints of single FPGA have limited the implementation of many complex algorithms including ICA. Using the reconfigurability of FPGA, we show, in this paper, how to manipulate the FPGA-based system to provide extra computing power for the parallelized ICA algorithm with limited FPGA resources. The synthesis aiming at the pilchard re-configurable FPGA platform is reported. The pilchard board is embedded with single Xilinx VIRTEX 1000E FPGA and transfers data directly to CPU on the 64-bit memory bus at the maximum frequency of 133MHz. Both the feasibility performance evaluations and experimental results validate the effectiveness and practicality of this synthesis, which can be extended to the spatial-variant jitter restoration for micro-UAV deployment.

Development of reconfigurable analog and digital circuits for plasma diagnostics measurement systems

International Nuclear Information System (INIS)

Srivastava, Amit Kumar; Sharma, Atish; Raval, Tushar

2009-01-01

In long pulse discharge tokamak, a large number of diagnostic channels are being used to understand the complex behavior of plasma. Different diagnostics demand different types of analog and digital processing for plasma parameters measurement. This leads to variable requirements of signal processing for diagnostic measurement. For such types of requirements, we have developed hardware with reconfigurable electronic devices, which provide flexible solution for rapid development of measurement system. Here the analog processing is achieved by Field Programmable Analog Array (FPAA) integrated circuit while reconfigurable digital devices (CPLD/FPGA) achieve digital processing. FPAA's provide an ideal integrated platform for implementing low to medium complexity analog signal processing. With dynamic reconfigurability, the functionality of the FPAA can be reconfigured in-system by the designer or on the fly by a microprocessor. This feature is quite useful to manipulate the tuning or the construction of any part of the analog circuit without interrupting operation of the FPAA, thus maintaining system integrity. The hardware operation control logic circuits are configured in the reconfigurable digital devices (CPLD/FPGA) to control proper hardware functioning. These reconfigurable devices provide the design flexibility and save the component space on the board. It also provides the flexibility for various setting through software. The circuit controlling commands are either issued by computer/processor or generated by circuit itself. (author)

Operating System Concepts for Reconfigurable Computing: Review and Survey

Directory of Open Access Journals (Sweden)

Marcel Eckert

2016-01-01

Full Text Available One of the key future challenges for reconfigurable computing is to enable higher design productivity and a more easy way to use reconfigurable computing systems for users that are unfamiliar with the underlying concepts. One way of doing this is to provide standardization and abstraction, usually supported and enforced by an operating system. This article gives historical review and a summary on ideas and key concepts to include reconfigurable computing aspects in operating systems. The article also presents an overview on published and available operating systems targeting the area of reconfigurable computing. The purpose of this article is to identify and summarize common patterns among those systems that can be seen as de facto standard. Furthermore, open problems, not covered by these already available systems, are identified.

Models and Techniques for Temperature Robust Systems on a Reconfigurable Platform

Directory of Open Access Journals (Sweden)

Sahil Shah

2017-08-01

Full Text Available This paper investigates the variability of various circuits and systems over temperature and presents several methods to improve their performance over temperature. The work demonstrates use of large scale reconfigurable System-On-Chip (SOC for reducing the variability of circuits and systems compiled on a Floating Gate (FG based Field Programmable Analog Array (FPAA. Temperature dependencies of circuits are modeled using an open-source simulator built in the Scilab/XCOS environment and the results are compared with measurement data obtained from the FPAA. This comparison gives further insight into the temperature dependence of various circuits and signal processing systems and allows us to compensate as well as predict their behavior. Also, the work presents several different current and voltage references that could help in reducing the variability caused due to changes in temperature. These references are standard blocks in the Scilab/Xcos environment that could be easily compiled on the FPAA. An FG based current reference is then used for biasing a 12 × 1 Vector Matrix Multiplication (VMM circuit and a second order G m − C bandpass filter to demonstrate the compilation and usage of these voltage/current reference in a reconfigurable fabric. The large scale FG FPAA presented here is fabricated in a 350 nm CMOS process.

Unified Singularity Modeling and Reconfiguration of 3rTPS Metamorphic Parallel Mechanisms with Parallel Constraint Screws

Directory of Open Access Journals (Sweden)

Yufeng Zhuang

2015-01-01

Full Text Available This paper presents a unified singularity modeling and reconfiguration analysis of variable topologies of a class of metamorphic parallel mechanisms with parallel constraint screws. The new parallel mechanisms consist of three reconfigurable rTPS limbs that have two working phases stemming from the reconfigurable Hooke (rT joint. While one phase has full mobility, the other supplies a constraint force to the platform. Based on these, the platform constraint screw systems show that the new metamorphic parallel mechanisms have four topologies by altering the limb phases with mobility change among 1R2T (one rotation with two translations, 2R2T, and 3R2T and mobility 6. Geometric conditions of the mechanism design are investigated with some special topologies illustrated considering the limb arrangement. Following this and the actuation scheme analysis, a unified Jacobian matrix is formed using screw theory to include the change between geometric constraints and actuation constraints in the topology reconfiguration. Various singular configurations are identified by analyzing screw dependency in the Jacobian matrix. The work in this paper provides basis for singularity-free workspace analysis and optimal design of the class of metamorphic parallel mechanisms with parallel constraint screws which shows simple geometric constraints with potential simple kinematics and dynamics properties.

A Design Method for Fault Reconfiguration and Fault-Tolerant Control of a Servo Motor

Directory of Open Access Journals (Sweden)

Jing He

2013-01-01

Full Text Available A design scheme that integrates fault reconfiguration and fault-tolerant position control is proposed for a nonlinear servo system with friction. Analysis of the non-linear friction torque and fault in the system is used to guide design of a sliding mode position controller. A sliding mode observer is designed to achieve fault reconfiguration based on the equivalence principle. Thus, active fault-tolerant position control of the system can be realized. A real-time simulation experiment is performed on a hardware-in-loop simulation platform. The results show that the system reconfigures well for both incipient and abrupt faults. Under the fault-tolerant control mechanism, the output signal for the system position can rapidly track given values without being influenced by faults.

Architecturally Reconfigurable Development of Mobile Games

DEFF Research Database (Denmark)

Zhang, Weishan

2005-01-01

. Mobile game domain variants could be handled uniformly and traced across all kinds of software assets. The architecture and configuration mechanism in our approach make optimizations that built into meta-components propagated to all product line members. We show this approach with an industrial Role-Playing-Game......Mobile game development must face the problem of multiple hardware and software platforms, which will bring large number of variants. To cut the development and maintenance efforts, in this paper, we present an architecturally reconfigurable software product line approach to develop mobile games...

Reconfigurable vision system for real-time applications

Science.gov (United States)

Torres-Huitzil, Cesar; Arias-Estrada, Miguel

2002-03-01

Recently, a growing community of researchers has used reconfigurable systems to solve computationally intensive problems. Reconfigurability provides optimized processors for systems on chip designs, and makes easy to import technology to a new system through reusable modules. The main objective of this work is the investigation of a reconfigurable computer system targeted for computer vision and real-time applications. The system is intended to circumvent the inherent computational load of most window-based computer vision algorithms. It aims to build a system for such tasks by providing an FPGA-based hardware architecture for task specific vision applications with enough processing power, using the minimum amount of hardware resources as possible, and a mechanism for building systems using this architecture. Regarding the software part of the system, a library of pre-designed and general-purpose modules that implement common window-based computer vision operations is being investigated. A common generic interface is established for these modules in order to define hardware/software components. These components can be interconnected to develop more complex applications, providing an efficient mechanism for transferring image and result data among modules. Some preliminary results are presented and discussed.

Perinatal exposure to PCB 153, but not PCB 126, alters bone tissue composition in female goat offspring

International Nuclear Information System (INIS)

Lundberg, Rebecca; Lyche, Jan L.; Ropstad, Erik; Aleksandersen, Mona; Roenn, Monika; Skaare, Janneche U.; Larsson, Sune; Orberg, Jan; Lind, P. Monica

2006-01-01

The aim of this study was to investigate if environmentally relevant doses of the putative estrogenic non dioxin-like PCB 153 and the dioxin-like PCB 126 caused changes in bone tissue in female goat offspring following perinatal exposure. Goat dams were orally dosed with PCB 153 in corn oil (98 μg/kg body wt/day) or PCB 126 (49 ng/kg body wt/day) from day 60 of gestation until delivery. The offspring were exposed to PCB in utero and through mother's milk. The suckling period lasted for 6 weeks. Offspring metacarpal bones were analysed using peripheral quantitative computed tomography (pQCT) after euthanisation at 9 months of age. The diaphyseal bone was analysed at a distance of 18% and 50% of the total bone length, and the metaphyseal bone at a distance of 9%. Also, biomechanical three-point bending of the bones was conducted, with the load being applied to the mid-diaphyseal pQCT measure point (50%). PCB 153 exposure significantly decreased the total cross-sectional area (125 mm 2 ± 4) versus non-exposed (142 mm 2 ± 5), decreased the marrow cavity (38 mm 2 ± 4) versus non-exposed (50 mm 2 ± 3) and decreased the moment of resistance (318 mm 3 ± 10) versus non-exposed (371 mm 3 ± 20) at the diaphyseal 18% measure point. At the metaphyseal measure point, the trabecular bone mineral density (121 mg/cm 3 ± 5) was increased versus non-exposed (111 mg/cm 3 ± 3). PCB 126 exposure did not produce any observable changes in bone tissue. The biomechanical testing of the bones did not show any significant changes in bone strength after PCB 153 or PCB 126 exposure. In conclusion, perinatal exposure to PCB 153, but not PCB 126, resulted in altered bone composition in female goat offspring

Transformational electronics are now reconfiguring

KAUST Repository

Rojas, Jhonathan Prieto

2015-05-22

Current developments on enhancing our smart living experience are leveraging the increased interest for novel systems that can be compatible with foldable, wrinkled, wavy and complex geometries and surfaces, and thus become truly ubiquitous and easy to deploy. Therefore, relying on innovative structural designs we have been able to reconfigure the physical form of various materials, to achieve remarkable mechanical flexibility and stretchability, which provides us with the perfect platform to develop enhanced electronic systems for application in entertainment, healthcare, fitness and wellness, military and manufacturing industry. Based on these novel structural designs we have developed a siliconbased network of hexagonal islands connected through double-spiral springs, forming an ultra-stretchable (~1000%) array for full compliance to highly asymmetric shapes and surfaces, as well as a serpentine design used to show an ultrastretchable (~800%) and flexible, spatially reconfigurable, mobile, metallic thin film copper (Cu)-based, body-integrated and non-invasive thermal heater with wireless controlling capability, reusability, heating-adaptability and affordability due to low-cost complementary metal oxide semiconductor (CMOS)-compatible integration. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

Automated PCB Inspection System

Directory of Open Access Journals (Sweden)

Syed Usama BUKHARI

2017-05-01

Full Text Available Development of an automated PCB inspection system as per the need of industry is a challenging task. In this paper a case study is presented, to exhibit, a proposed system for an immigration process of a manual PCB inspection system to an automated PCB inspection system, with a minimal intervention on the existing production flow, for a leading automotive manufacturing company. A detailed design of the system, based on computer vision followed by testing and analysis was proposed, in order to aid the manufacturer in the process of automation.

Production Platform Development Through the Four Loops of Concern

DEFF Research Database (Denmark)

Sørensen, Daniel Grud Hellerup; Bossen, Jacob; Bejlegaard, Mads

2017-01-01

Managing product variety is still an issue in the industry, and one that gets a lot of attention. Among several ways to address this issue, is the development of platforms. Platforms, for instance coupled with the use of reconfigurable manufacturing systems, can potentially enable manufacturers...

Experimental feeding of DDE and PCB to female big brown bats (Eptesicus fuscus)

Science.gov (United States)

Clark, D.R.; Prouty, R.M.

1977-01-01

Twenty-two female big brown bats (Eptesicus fuscus) were collected in a house attic in Montgomery County, Maryland. Seventeen were fed mealworms (Tenebrio molitor larvae) that contained 166 ppm DDE; the other five were fed uncontaminated mealworms. After 54 days of feeding, six dosed bats were frozen and the remaining 16 were starved to death. In a second experiment, 21 female big brown bats were collected in a house attic in Prince Georges County, Maryland. Sixteen were fed mealworms that contained 9.4 ppm Aroclor 1254 (PCB). After 37 days, two bats had died, four dosed bats were frozen, and the remaining 15 were starved to death. Starvation caused mobilization of stored residues. After the feeding periods, average weights of all four groups (DDE-dosed, DDE control, PCB-dosed, PCB control) had increased. However, weights of DDE-dosed bats had increased significantly more than those of their contols, whereas weights of PCB-dosed bats had increased significantly less than those of their controls. During starvation, PCB-dosed bats lost weight significantly more slowly than controls. Because PCB levels in dosed bats resembled levels found in some free-living big brown bats, PCBs may be slowing metabolic rates of some free-living bats. It is not known how various common organochlorine residues may affect metabolism in hibernating bats. DDE and PCB increased in brains of starving bats as carcass fat was metabolized. Because the tremors and/or convulsions characteristic of neurotoxicity were not observed, we think even the maximum brain levels attained (132 ppm DDE, 20 ppm PCB) were sublethal. However, extrapolation of our DDE data predicted lethal brain levels when fat reserves declined sufficiently. PCB-dosed bats were probably in no danger of neurotoxic poisoning. However, PCB can kill by a nonneurotoxic mode, and this could explain the deaths of two bats on PCB dosage.

Production Platform Development Through the Four Loops of Concern

DEFF Research Database (Denmark)

Sørensen, Daniel Grud Hellerup; Bossen, Jacob; Bejlegaard, Mads

2017-01-01

Managing product variety is still an issue in the industry, and one that gets a lot of attention. Among several ways to address this issue, is the development of platforms. Platforms, for instance coupled with the use of reconfigurable manufacturing systems, can potentially enable manufacturers t...

PCB-153 shows different dynamics of mobilisation from differentiated rat adipocytes during lipolysis in comparison with PCB-28 and PCB-118.

Science.gov (United States)

Louis, Caroline; Tinant, Gilles; Mignolet, Eric; Thomé, Jean-Pierre; Debier, Cathy

2014-01-01

Polychlorinated biphenyls (PCBs) are persistent organic pollutants. Due to their lipophilic character, they are preferentially stored within the adipose tissue. During the mobilisation of lipids, PCBs might be released from adipocytes into the bloodstream. However, the mechanisms associated with the release of PCBs have been poorly studied. Several in vivo studies followed their dynamics of release but the complexity of the in vivo situation, which is characterised by a large range of pollutants, does not allow understanding precisely the behaviour of individual congeners. The present in vitro experiment studied the impact of (i) the number and position of chlorine atoms of PCBs on their release from adipocytes and (ii) the presence of other PCB congeners on the mobilisation rate of such molecules. Differentiated rat adipocytes were used to compare the behaviour of PCB-28, -118 and -153. Cells were contaminated with the three congeners, alone or in cocktail, and a lipolysis was then induced with isoproterenol during 12 hours. Our data indicate that the three congeners were efficiently released from adipocytes and accumulated in the medium during the lipolysis. Interestingly, for a same level of cell lipids, PCB-153, a hexa-CB with two chlorine atoms in ortho-position, was mobilised slower than PCB-28, a tri-CB, and PCB-118, a penta-CB, which are both characterised by one chlorine atom in ortho-position. It suggests an impact of the chemical properties of pollutants on their mobilisation during periods of negative energy balance. Moreover, the mobilisation of PCB congeners, taken individually, did not seem to be influenced by the presence of other congeners within adipocytes. These results not only highlight the obvious mobilisation of PCBs from adipocytes during lipolysis, in parallel to lipids, but also demonstrate that the structure of congeners defines their rate of release from adipocytes.

PCB Fault Detection Using Image Processing

Science.gov (United States)

Nayak, Jithendra P. R.; Anitha, K.; Parameshachari, B. D., Dr.; Banu, Reshma, Dr.; Rashmi, P.

2017-08-01

The importance of the Printed Circuit Board inspection process has been magnified by requirements of the modern manufacturing environment where delivery of 100% defect free PCBs is the expectation. To meet such expectations, identifying various defects and their types becomes the first step. In this PCB inspection system the inspection algorithm mainly focuses on the defect detection using the natural images. Many practical issues like tilt of the images, bad light conditions, height at which images are taken etc. are to be considered to ensure good quality of the image which can then be used for defect detection. Printed circuit board (PCB) fabrication is a multidisciplinary process, and etching is the most critical part in the PCB manufacturing process. The main objective of Etching process is to remove the exposed unwanted copper other than the required circuit pattern. In order to minimize scrap caused by the wrongly etched PCB panel, inspection has to be done in early stage. However, all of the inspections are done after the etching process where any defective PCB found is no longer useful and is simply thrown away. Since etching process costs 0% of the entire PCB fabrication, it is uneconomical to simply discard the defective PCBs. In this paper a method to identify the defects in natural PCB images and associated practical issues are addressed using Software tools and some of the major types of single layer PCB defects are Pattern Cut, Pin hole, Pattern Short, Nick etc., Therefore the defects should be identified before the etching process so that the PCB would be reprocessed. In the present approach expected to improve the efficiency of the system in detecting the defects even in low quality images

Dechlorination of PCB by radiation

International Nuclear Information System (INIS)

Shinozaki, Yoshiharu

1978-01-01

On the PCB poisoning accident in Japan occurred in 1968, Tokyo Metropolitan Isotope Research Center started to investigate the decomposition of PCB (polychlorinated biphenyl) on the request of Metropolitan government. The research center has found that if PCB is dissolved or extracted in alkaline 2-propanol solution and then irradiated with γ-ray, PCB is dechlorinated in chain-reactive manner, and biphenyl and salts (KCl or NaCl) are formed. Afterwards, it has been found that photolysis has also similar effect on PCB. Then, the basic design of a disposal pilot plant using ultraviolet ray and its economic evaluation have been performed, which is composed of photolysis reaction process, refining process and waste disposal process. However, its disposal cost only has reached the value three times as high as that of incineration process. If this is conducted by radiolysis, its disposal cost can be reduced to about 1/12 of that of ultraviolet ray system when an electron accelerator is employed. Cs-137 source gives better results than Co-60. Dechlorination process of PCB has been thus established. Further reduction of total cost will be the keypoint of radiolysis system to be adopted. If the application of electron accelerators to sludge treatment in the future, the effective use of recovered products, and the possibility of using Cs-137 large sources are considered, it is expected that the disposal cost of radiolysis process system becomes comparable with the incineration process. (Wakatsuki, Y.)

Using Partial Reconfiguration and Message Passing to Enable FPGA-Based Generic Computing Platforms

Directory of Open Access Journals (Sweden)

Manuel Saldaña

2012-01-01

Full Text Available Partial reconfiguration (PR is an FPGA feature that allows the modification of certain parts of an FPGA while the rest of the system continues to operate without disruption. This distinctive characteristic of FPGAs has many potential benefits but also challenges. The lack of good CAD tools and the deep hardware knowledge requirement result in a hard-to-use feature. In this paper, the new partition-based Xilinx PR flow is used to incorporate PR within our MPI-based message-passing framework to allow hardware designers to create template bitstreams, which are predesigned, prerouted, generic bitstreams that can be reused for multiple applications. As an example of the generality of this approach, four different applications that use the same template bitstream are run consecutively, with a PR operation performed at the beginning of each application to instantiate the desired application engine. We demonstrate a simplified, reusable, high-level, and portable PR interface for X86-FPGA hybrid machines. PR issues such as local resets of reconfigurable modules and context saving and restoring are addressed in this paper followed by some examples and preliminary PR overhead measurements.

Total destruction of PCB transformers

International Nuclear Information System (INIS)

Myers, D.S.

1991-01-01

This paper reports that if elimination of PCB liability, including lingering liabilities, is the goal, then landfilling cannot be and option. The law is clear that the generator of PCB waste is responsible for that waste until this destruction. Landfilling is not destruction. Retrofilling as askarel units will not get rid of all PCB liabilities, either. Askarel retrofilling can only make this claim when it can give a lifetime guaranty of no detectable PCBs. States like Washington and California regulate, as hazardous waste, fluids which contain greater than 2 and 5 ppm PCB, respectively. There is no guarantee that your state will not so regulate PCBs in the future or that the federal laws might tighten up. Therefore, replacement and disposal by Resource Recovery constitutes the only lifetime guarantee on the market that the PCBs in your askarel transformers will never come back to haunt you

Assessment of LANL PCB waste management documentation

International Nuclear Information System (INIS)

David, K.D.; Hoevemeyer, S.S.; Stirrup, T.S.; Jennrich, E.A.; Lund, D.M.

1991-04-01

The objective of this report is to present findings from evaluating the Los Alamos National Laboratory (LANL) Polychlorinated Biphenyls (PCB) Waste Acceptance Criteria (WAC) to determine if it meets applicable DOE and Code of Federal Regulation (CFR) requirements. DOE Order 5820.2A and 40 CFR 761 (Polychlorinated Biphenyls Manufacturing, Processing, Distribution in Commerce, and Use Prohibitions) set forth requirements and guidelines for the establishment of Waste Acceptance Criteria. The primary purpose of a PCB WAC is to provide generators and waste management with established criteria that must be met before PCB wastes can be accepted for treatment, storage, and/or disposal. An annotated outline for a generic PCB WAC was developed based on the requirements of 5820.2A and 40 CFR 761. The major elements that should be addressed by a PCB WAC were determined to be as follows: Waste Package/Container, Waste Forms, PCB Concentrations, Labeling, and Data Package Certification

5th International Conference on Changeable, Agile, Reconfigurable and Virtual Production

CERN Document Server

2014-01-01

The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing t...

Impact of reconfiguration period and photovoltaic penetration on distribution grid reconfiguration

DEFF Research Database (Denmark)

Chittur Ramaswamy, Parvathy; Deconinck, Geert; Pillai, Jayakrishnan Radhakrishna

2014-01-01

of reconfiguration and its impact on network losses in the context of time-varying load. Though reconfiguring a network reduces the losses, this paper calls for a comparison of number of switching vs. the loss reduction in order to decide the period of reconfiguration. This paper considers also the impact of varying...... photovoltaic (PV) penetration on the resulting optimal configuration. It validates the method of using a parameter namely minimum loss reduction parameter to avoid tedious computational efforts in finding the optimal configuration when an infinitesimal change in PV penetration occurs....

Recent changes in federal PCB regulations

International Nuclear Information System (INIS)

Ewing, H.

1995-01-01

An overview of the federal regulations dealing with PCBs, the draft PCB Transformer Decontamination Standards and Protocols, and the Practice of Ballast Splitting was given. Answers were provided to practical questions concerning the regulations, specifically, responsibility for storage, labelling requirements, waste export regulations, treatment and destruction standards, transformer decontamination, decontamination standards, and the practice of ballast splitting into PCB and non-PCB materials. Details of sampling procedures and sample handling were also described

40 CFR 761.61 - PCB remediation waste.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false PCB remediation waste. 761.61 Section... PROHIBITIONS Storage and Disposal § 761.61 PCB remediation waste. This section provides cleanup and disposal options for PCB remediation waste. Any person cleaning up and disposing of PCBs managed under this section...

Self-sufficiency of an autonomous reconfigurable modular robotic organism

CERN Document Server

Qadir, Raja Humza

2015-01-01

This book describes how the principle of self-sufficiency can be applied to a reconfigurable modular robotic organism. It shows the design considerations for a novel REPLICATOR robotic platform, both hardware and software, featuring the behavioral characteristics of social insect colonies. Following a comprehensive overview of some of the bio-inspired techniques already available, and of the state-of-the-art in re-configurable modular robotic systems, the book presents a novel power management system with fault-tolerant energy sharing, as well as its implementation in the REPLICATOR robotic modules. In addition, the book discusses, for the first time, the concept of “artificial energy homeostasis” in the context of a modular robotic organism, and shows its verification on a custom-designed simulation framework in different dynamic power distribution and fault tolerance scenarios. This book offers an ideal reference guide for both hardware engineers and software developers involved in the design and implem...

Polychlorinated Biphenyls (PCB) Residue Effects Database

Data.gov (United States)

U.S. Environmental Protection Agency — The PCB Residue Effects (PCBRes) Database was developed to assist scientists and risk assessors in correlating PCB and dioxin-like compound residues with toxic...

Simultaneous electrodialytic removal of PAH, PCB, TBT and heavy metals from sediments

DEFF Research Database (Denmark)

Pedersen, Kristine B.; Lejon, Tore; Jensen, Pernille Erland

2017-01-01

with the need of different remedial actions for each pollutant. In this study, electrodialytic remediation (EDR) of sediments was found effective for simultaneous removal of heavy metals and organic pollutants for sediments from Arctic regions - Sisimiut in Greenland and Hammerfest in Norway. The influence...... was found to be important for the removal of heavy metals and TBT, while photolysis was significant for removal of PAH, PCB and TBT. In addition, dechlorination was found to be important for the removal of PCB. The highest removal efficiencies were found for heavy metals, TBT and PCB (>40%) and lower......Contaminated sediments are remediated in order to protect human health and the environment, with the additional benefit of using the treated sediments for other activities. Common for many polluted sediments is the contamination with several different pollutants, making remediation challenging...

Classification of Reconfiguration Resources and Lead Time for Reconfigurable Manufacturing Systems

NARCIS (Netherlands)

Ing. Erik Puik; Daniël Telgen; Leo van Moergestel; Darek Ceglarek

2014-01-01

From the article: Manufacturing technology can improve the turnover of a company if it enables fast market introduction for volume production. Reconfigurable equipment is developed to meet the growing demand for more agile production. Modular reconfiguration, defined as changing the structure of

Complete PCB design using OrCAD capture and PCB editor

CERN Document Server

Mitzner, Kraig

2009-01-01

This book provides instruction on how to use the OrCAD design suite to design and manufacture printed circuit boards. The primary goal is to show the reader how to design a PCB using OrCAD Capture and OrCAD Editor. Capture is used to build the schematic diagram of the circuit, and Editor is used to design the circuit board so that it can be manufactured. The book is written for both students and practicing engineers who need in-depth instruction on how to use the software, and who need background knowledge of the PCB design process. KEY FEATURES:* Beginning to end cove

Evaluation of cumulative PCB exposure estimated by a job exposure matrix versus PCB serum concentrations

Science.gov (United States)

Ruder, Avima M.; Succop, Paul; Waters, Martha A.

2015-01-01

Although polychlorinated biphenyls (PCBs) have been banned in many countries for more than three decades, exposures to PCBs continue to be of concern due to their long half-lives and carcinogenic effects. In National Institute for Occupational Safety and Health studies, we are using semiquantitative plant-specific job exposure matrices (JEMs) to estimate historical PCB exposures for workers (n=24,865) exposed to PCBs from 1938 to 1978 at three capacitor manufacturing plants. A subcohort of these workers (n=410) employed in two of these plants had serum PCB concentrations measured at up to four times between 1976 and 1989. Our objectives were to evaluate the strength of association between an individual worker’s measured serum PCB levels and the same worker’s cumulative exposure estimated through 1977 with the (1) JEM and (2) duration of employment, and to calculate the explained variance the JEM provides for serum PCB levels using (3) simple linear regression. Consistent strong and statistically significant associations were observed between the cumulative exposures estimated with the JEM and serum PCB concentrations for all years. The strength of association between duration of employment and serum PCBs was good for highly chlorinated (Aroclor 1254/HPCB) but not less chlorinated (Aroclor 1242/LPCB) PCBs. In the simple regression models, cumulative occupational exposure estimated using the JEMs explained 14–24 % of the variance of the Aroclor 1242/LPCB and 22–39 % for Aroclor 1254/HPCB serum concentrations. We regard the cumulative exposure estimated with the JEM as a better estimate of PCB body burdens than serum concentrations quantified as Aroclor 1242/LPCB and Aroclor 1254/HPCB. PMID:23475397

PCB dechlorination in anaerobic soil slurry reactors

International Nuclear Information System (INIS)

Klasson, K.T.; Evans, B.S.

1993-01-01

Many industrial locations, including the US Department of Energy's, have identified needs for treatment of polychlorinated biphenyl (PCB) wastes and remediation of PCB-contaminated sites. Biodegradation of PCBs is a potentially effective technology for the treatment of PCB-contaminated soils and sludges, including mixed wastes; however, a practical remediation technology has not yet been demonstrated. In laboratory experiments, soil slurry bioreactors inoculated with microorganisms extracted from PCB-contaminated sediments from the Hudson River have been used to obtain anaerobic dechlorination of PCBS. The onset of dechlorination activity can be accelerated by addition of nutritional amendments and inducers. After 15 weeks of incubation with PCB-contaminated soil and nutrient solution, dechlorination has been observed under several working conditions. The best results show that the average chlorine content steadily dropped from 4.3 to 3.5 chlorines per biphenyl over a 15-week period

Ice matrix in reconfigurable microfluidic systems

Energy Technology Data Exchange (ETDEWEB)

Bossi, A M [Department of Biotechnology, University of Verona, Strada Le Grazie 15, I-37134, Verona (Italy); Vareijka, M; Piletska, E V; Turner, A P F; Piletsky, S A [Cranfield Health, Cranfield University, Vincent Building B52, Cranfield, Bedfordshire, MK43 0AL (United Kingdom); Meglinski, I [Department of Physics, University of Otago, PO Box 56, Dunedin, 9054 (New Zealand)

2013-07-01

Microfluidic devices find many applications in biotechnologies. Here, we introduce a flexible and biocompatible microfluidic ice-based platform with tunable parameters and configuration of microfluidic patterns that can be changed multiple times during experiments. Freezing and melting of cavities, channels and complex relief structures created and maintained in the bulk of ice by continuous scanning of an infrared laser beam are used as a valve action in microfluidic systems. We demonstrate that pre-concentration of samples and transport of ions and dyes through the open channels created can be achieved in ice microfluidic patterns by IR laser-assisted zone melting. The proposed approach can be useful for performing separation and sensing processes in flexible reconfigurable microfluidic devices. (paper)

Ice matrix in reconfigurable microfluidic systems

International Nuclear Information System (INIS)

Bossi, A M; Vareijka, M; Piletska, E V; Turner, A P F; Piletsky, S A; Meglinski, I

2013-01-01

Microfluidic devices find many applications in biotechnologies. Here, we introduce a flexible and biocompatible microfluidic ice-based platform with tunable parameters and configuration of microfluidic patterns that can be changed multiple times during experiments. Freezing and melting of cavities, channels and complex relief structures created and maintained in the bulk of ice by continuous scanning of an infrared laser beam are used as a valve action in microfluidic systems. We demonstrate that pre-concentration of samples and transport of ions and dyes through the open channels created can be achieved in ice microfluidic patterns by IR laser-assisted zone melting. The proposed approach can be useful for performing separation and sensing processes in flexible reconfigurable microfluidic devices. (paper)

Ice matrix in reconfigurable microfluidic systems

Science.gov (United States)

Bossi, A. M.; Vareijka, M.; Piletska, E. V.; Turner, A. P. F.; Meglinski, I.; Piletsky, S. A.

2013-07-01

Microfluidic devices find many applications in biotechnologies. Here, we introduce a flexible and biocompatible microfluidic ice-based platform with tunable parameters and configuration of microfluidic patterns that can be changed multiple times during experiments. Freezing and melting of cavities, channels and complex relief structures created and maintained in the bulk of ice by continuous scanning of an infrared laser beam are used as a valve action in microfluidic systems. We demonstrate that pre-concentration of samples and transport of ions and dyes through the open channels created can be achieved in ice microfluidic patterns by IR laser-assisted zone melting. The proposed approach can be useful for performing separation and sensing processes in flexible reconfigurable microfluidic devices.

Advances in Reconfigurable Mechanisms and Robots I

CERN Document Server

Zoppi, Matteo; Kong, Xianwen

2012-01-01

Advances in Reconfigurable Mechanisms and Robots I provides a selection of key papers presented in The Second ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots (ReMAR 2012) held on 9th -11th  July 2012 in Tianjin, China. This ongoing series of conferences will be covered in this ongoing collection of books.   A total of seventy-eight papers are divided into seven parts to cover the topology, kinematics and design of reconfigurable mechanisms with the reconfiguration theory, analysis and synthesis, and present the current research and development in the field of reconfigurable mechanisms including reconfigurable parallel mechanisms. In this aspect, the recent study and development of reconfigurable robots are further presented with the analysis and design and with their control and development. The bio-inspired mechanisms and subsequent reconfiguration are explored in the challenging fields of rehabilitation and minimally invasive surgery. Advances in Reconfigurable Mechanisms and ...

PCB eksponering i Farum Midtpunkt

DEFF Research Database (Denmark)

Meyer, Harald William; Frederiksen, Marie; Ebbehøj, Niels Erik

I marts og april 2011 blev i alt 104 lejligheder og 289 beboere fra Farum Midtpunkt undersøgt for niveauer af PolyChlorerede Biphenyler (PCB) i henholdsvis fuger og indeluft i lejligheder-ne, og i blodplasma. Til analyserne i denne rapport indgik 273 beboere, 139 fra PCB-forurenede lejligheder og...... 134 fra ikke-forurenede lejligheder. Der blev indsamlet luftprøver fra 83 forure-nede og 21 ikke-forurenede lejligheder og fugeprøver fra 20 forurenede lejligheder. Ni ud af 24 målte PCB-kongenere var under detektionsgrænsen i luften, inkl. de to mest toksiske kongenere nr. 126 og 169. For de...... forurenede lejlig-heder, undtagen for nr. 183 og 190, samt for nr. 182 som alle lå under detektionsgrænsen. For ni ud af tolv dioxin-lignende PCB-forbindelser var alle, eller næsten alle prøver under detektions-grænsen. For nr. 105 og 118 sås signifikant højere niveau blandt eksponerede. Mænd havde et lidt...

PCB i bygninger - afhjælpning, renovering og nedrivning

DEFF Research Database (Denmark)

Andersen, Helle Vibeke

SBi-anvisning 268 beskriver, hvordan PCB-forurening af indeluften afhjælpes, og hvordan PCB håndteres, når man renoverer eller nedriver bygninger med PCB. Uanset om der er tale om afhjælpning, renovering eller nedrivning, kan arbejdet generere PCB-holdigt affald. Anvisningen forklarer derfor......, hvordan affaldet skal håndteres, og hvordan man beskytter mennesker og miljø under arbejdet. Anvisningen er baseret på byggebranchens erfaringer og den aktuelle forskningsbaserede viden om PCB i bygninger. SBi-anvisning 268 afløser den snart fire år gamle SBi-anvisning 242 om renovering af bygninger med...... PCB, som ikke behandlede spørgsmålet om affaldshåndtering....

Reconfigurable microfluidic hanging drop network for multi-tissue interaction and analysis.

Science.gov (United States)

Frey, Olivier; Misun, Patrick M; Fluri, David A; Hengstler, Jan G; Hierlemann, Andreas

2014-06-30

Integration of multiple three-dimensional microtissues into microfluidic networks enables new insights in how different organs or tissues of an organism interact. Here, we present a platform that extends the hanging-drop technology, used for multi-cellular spheroid formation, to multifunctional complex microfluidic networks. Engineered as completely open, 'hanging' microfluidic system at the bottom of a substrate, the platform features high flexibility in microtissue arrangements and interconnections, while fabrication is simple and operation robust. Multiple spheroids of different cell types are formed in parallel on the same platform; the different tissues are then connected in physiological order for multi-tissue experiments through reconfiguration of the fluidic network. Liquid flow is precisely controlled through the hanging drops, which enable nutrient supply, substance dosage and inter-organ metabolic communication. The possibility to perform parallelized microtissue formation on the same chip that is subsequently used for complex multi-tissue experiments renders the developed platform a promising technology for 'body-on-a-chip'-related research.

An Interface for a Decentralized 2D Reconfiguration on Xilinx Virtex-FPGAs for Organic Computing

Directory of Open Access Journals (Sweden)

Christian Schuck

2009-01-01

Full Text Available Partial and dynamic online reconfiguration of Field Programmable Gate Arrays (FPGAs is a promising approach to design high adaptive systems with lower power consumption, higher task specific performance, and even build-in fault tolerance. Different techniques and tool flows have been successfully developed. One of them, the two-dimensional partial reconfiguration, based on the Readback-Modify-Writeback method implemented on Xilinx Virtex devices, makes them ideally suited to be used as a hardware platform in future organic computing systems, where a highly adaptive hardware is necessary. In turn, decentralisation, the key property of an organic computing system, is in contradiction with the central nature of the FPGAs configuration port. Therefore, this paper presents an approach that connects the single ICAP port to a network on chip (NoC to provide access for all clients of the network. Through this a virtual decentralisation of the ICAP is achieved. Further true 2-dimensional partial reconfiguration is raised to a higher level of abstraction through a lightweight Readback-Modify-Writeback hardware module with different configuration and addressing modes. Results show that configuration data as well as reconfiguration times could be significantly reduced.

Introduction to Reconfigurable Supercomputing

CERN Document Server

Lanzagorta, Marco; Rosenberg, Robert

2010-01-01

This book covers technologies, applications, tools, languages, procedures, advantages, and disadvantages of reconfigurable supercomputing using Field Programmable Gate Arrays (FPGAs). The target audience is the community of users of High Performance Computers (HPe who may benefit from porting their applications into a reconfigurable environment. As such, this book is intended to guide the HPC user through the many algorithmic considerations, hardware alternatives, usability issues, programming languages, and design tools that need to be understood before embarking on the creation of reconfigur

PCB concentrations of lake whitefish (Coregonus clupeaformis) vary by sex

Science.gov (United States)

Madenjian, Charles P.; Ebener, Mark P.; Sepulveda, Maria S.

2015-01-01

We determined whole-fish polychlorinated biphenyl (PCB) concentrations in 26 female lake whitefish (Coregonus clupeaformis) and 34 male lake whitefish from northern Lake Huron. In 5 of the 26 female lake whitefish, we also determined PCB concentrations in the somatic tissue and ovaries. In addition, bioenergetics modeling was used to determine the contribution of the growth dilution effect to the observed difference in PCB concentrations between the sexes. Whole-fish PCB concentrations for females and males averaged 60 ng/g and 80 ng/g, respectively; thus males were 34% higher in PCB concentration compared with females. Based on the PCB determinations in the somatic tissue and ovaries, we predicted that PCB concentration of females would increase by 2.5%, on average, immediately after spawning due to release of eggs. Thus, the change in PCB concentration due to release of eggs did not explain, to any degree, the higher PCB concentrations observed in males compared with females. Bioenergetics modeling results indicated that the growth dilution effect could account for males being only 0.7% higher in PCB concentration compared with females. Thus, the growth dilution effect contributed very little to the observed difference in PCB concentrations between the sexes. We conclude that males were higher than females in PCB concentration most likely due to a higher rate of energy expenditure, stemming from greater activity and a greater resting metabolic rate. A higher rate of energy expenditure leads to a higher rate of food consumption, which, in turn, leads to a higher PCB accumulation rate.

Reference standards for quantitative trace analysis of PCB's by GC. Technical PCB formulations for the calibration of ECD and MSD responses

Energy Technology Data Exchange (ETDEWEB)

Krupcik, J. (Slovak Technical Univ., Department of Analytical Chemistry, Bratislava (Slovakia)); Kocan, A. (Institute of Preventive Medicine, Bratislava (Slovakia)); Petrik, J. (Institute of Preventive Medicine, Bratislava (Slovakia)); Leclercq, P.A. (Eindhoven University of Technology, Dept. of Chemical Engineering, Lab. of Instrumental Analysis (Netherlands)); Ballschmiter, K. (University of Ulm, Dept. of Analytical and Environmental Chemistry (Germany))

1993-04-01

The composition of any technical PCB formulation can be determined directly by analyzing the PCB sample by gas chromatography with a flame ionization detector (GC-FID), provided the relative molecular masses of the components are known. The response of electron capture and selected-ion monitoring, mass-spectra detectors can then be calibrated for individual PCB congeners by correlation of the chromatographic patterns with those of concentrated PCB samples obtained by GC-FID. This procedure, which uses a given technical PCB formulation as a secondary reference standard mixture, is to be preferred over existing calibration methods, when results with [+-]10% errors are acceptable because commercial PCB formulations cover the whole range of chlorination products. (orig.)

Nested Reconfigurable Robots: Theory, Design, and Realization

Directory of Open Access Journals (Sweden)

Ning Tan

2015-07-01

Full Text Available Rather than the conventional classification method, we propose to divide modular and reconfigurable robots into intra-, inter-, and nested reconfigurations. We suggest designing the robot with nested reconfigurability, which utilizes individual robots with intra-reconfigurability capable of combining with other homogeneous/heterogeneous robots (inter-reconfigurability. The objective of this approach is to generate more complex morphologies for performing specific tasks that are far from the capabilities of a single module or to respond to programmable assembly requirements. In this paper, we discuss the theory, concept, and initial mechanical design of Hinged-Tetro, a self-reconfigurable module conceived for the study of nested reconfiguration. Hinged-Tetro is a mobile robot that uses the principle of hinged dissection of polyominoes to transform itself into any of the seven one-sided tetrominoes in a straightforward way. The robot can also combine with other modules for shaping complex structures or giving rise to a robot with new capabilities. Finally, the validation experiments verify the nested reconfigurability of Hinged-Tetro. Extensive tests and analyses of intra-reconfiguration are provided in terms of energy and time consumptions. Experiments using two robots validate the inter-reconfigur ability of the proposed module.

Dioxin-like PCB in indoor air contaminated with different sources

Energy Technology Data Exchange (ETDEWEB)

Heinzow, B.G.J.; Mohr, S.; Ostendorp, G. [Landesamt fuer Gesundheit und Arbeitssicherheit des Landes Schleswig-Holstein, Flintbek (Germany); Kerst, M.; Koerner, W. [Bayerisches Landesamt fuer Umweltschutz, Augsburg (Germany)

2004-09-15

Polychlorinated biphenyls (PCB) have been used in public building constructions for various purposes in the 1960s and 1970s, mainly as an additive to concrete, caulking, grout, paints, as a major constitutent of permanent elastic Thiokol rubber sealants and flame retardant coatings of acoustic ceiling tiles. Offgazing of semivolatile PCB from building materials can nowadays still result in considerable house-dust contamination and in indoor air concentrations exceeding 10,000 ng/m{sup 3}. In Germany, PCB levels in indoor air in non-occupational settings have been regulated with a tolerable total PCB concentration of 300 ng /m{sup 3} and an intervention level of 3000 ng/m{sup 3}. Lower re-entry criteria have been proposed by Michaud et al. Technical mixtures of PCB contain dioxin-like non- and mono-ortho substituted PCB congeners and are contaminated with trace amounts of polychlorinated dibenzodioxins (PCDD) and mainly dibenzofurans (PCDF), sharing overlapping toxic effects and physicochemical properties. We report here on levels of dioxinlike PCB measured in buildings with various PCB sources and correlations among PCDD/PCDF and dioxin-like PCB and di-ortho PCB.

Block RAM-based architecture for real-time reconfiguration using Xilinx® FPGAs

Directory of Open Access Journals (Sweden)

Rikus le Roux

2015-07-01

Full Text Available Despite the advantages dynamic reconfiguration adds to a system, it only improves system performance if the execution time exceeds the configuration time. As a result, dynamic reconfiguration is only capable of improving the performance of quasi-static applications. In order to improve the performance of dynamic applications, researchers focus on improving the reconfiguration throughput. These approaches are mostly limited by the bus commonly used to connect the configuration controller to the memory, which contributes to the configuration time. A method proposed to ameliorate this overhead is an architecture utilizing localised block RAM (BRAM connected to the configuration controller to store the configuration bitstream. The aim of this paper is to illustrate the advantages of the proposed architecture, especially for reconfiguring real-time applications. This is done by validating the throughput of the architecture and comparing this to the maximum theoretical throughput of the internal configuration access port (ICAP. It was found that the proposed architecture is capable of reconfiguring an application within a time-frame suitable for real-time reconfiguration. The drawback of this method is that the BRAM is extremely limited and only a discrete set of configurations can be stored. This paper also proposes a method on how this can be mitigated without affecting the throughput.

Comparative developmental toxicity of planar polychlorinated biphenyl congeners in chickens, American kestrels, and common terns

Science.gov (United States)

Hoffman, D.J.; Melancon, M.J.; Klein, P.N.; Eisemann, J.D.; Spann, J.W.

1998-01-01

The effects of PCB congeners, PCB 126 (3,3',4,4',5-pentaCB) and PCB 77 (3,3'4,4'-tetraCB), were examined in chicken (Gallus gallus), American kestrel (Falco sparverius), and common tern (Sterna hirundo) embryos through hatching, following air cell injections on day 4. PCB 126 caused malformations and edema in chickens starting at 0.3 ppb, in kestrels at 2.3 ppb, but in terns only at levels affecting hatching success (44 ppb). Extent of edema was most severe in chickens and least in terns. Defects of the beak were common in all species, but with crossed beak most prevalent in terns. Effects on embryo growth were most apparent for PCB 126 in chickens and kestrels. The approximate LD50 for PCB 126 in chickens was 0.4 ppb, in kestrels was 65 ppb, and in terns was 104 ppb. The approximate LD50 for PCB 77 in chickens was 2.6 ppb and in kestrels was 316 ppb. Induction of cytochrome P450 associated monooxygenase activity (EROD activity) by PCB 126 in chick embryo liver was about 800 times more responsive than in tern and at least 1000 times more responsive than in kestrel. High concentrations of PCB 126 found in bald eagle eggs are nearly 20-fold higher than the lowest toxic concentration tested in kestrels. Concentrations of PCB 126 causing low level toxic effects in common tern eggs are comparable to highest levels in common terns and Forster's terns in the field, suggesting additional involvement of other compounds in the Great Lakes.

Reconfiguration of distribution nets

International Nuclear Information System (INIS)

Latorre Bayona, Gerardo; Angarita Marquez, Jorge Luis

2000-01-01

Starting of the location of the reconfiguration problem inside the context of the operation of distribution nets, of the quality indicators definition and of the presentation of the alternatives more used for reduction of technical losses, they are related diverse reconfiguration methodologies proposed in the technical literature, pointing out their three principals limitations; also are presents the results of lost obtained starting from simulation works carried out in distribution circuits of the ESSA ESP, which permitting to postulate the reconfiguration of nets like an excellent alternative to reduce technical losses

Thermal dechlorination of PCB-209 over Ca species-doped Fe₂O₃.

Science.gov (United States)

Su, Guijin; Huang, Linyan; Shi, Ruifang; Liu, Yexuan; Lu, Huijie; Zhao, Yuyang; Yang, Fan; Gao, Lirong; Zheng, Minghui

2016-02-01

Degradation reaction of decachlorobiphenyl (PCB-209) was investigated over the synthesized Ca species-doped Fe2O3 at 300 °C. The 1%Ca-Fe2O3 exhibited the highest activity among the four catalysts prepared with the pseudo-first order reaction at k(obs) = 0.103 min(-1). PCB-207, PCB-197, PCB-176, PCB-184, PCB-150, PCB-136, PCB-148, PCB-104, PCB-96, PCB-54, PCB-19, PCB-4 and PCB-1 were identified as the dominant isomers in their respective nonachlorobiphenyl (NonaCB) to monochlorobiphenyl (MonoCB) homologue groups. Analysis of the hydrodechlorination products indicated that dechlorination was much more favored on meta- and para-than on ortho-positions. The formation of significantly predominant NonaCB and octachlorobiphenyl (OctaCB) isomers was attributed to lower energy principles and to the 90° dihedral angles of two aromatic rings which prevented the hydrodechlorination at ortho-positions. When the number of chlorine atoms is not more than 7, the steric effect supports the formation of predominant PCB isomers having chlorines at four ortho-positions. During the dechlorination of tetrachlorobiphenyl (TetraCB) formed to generate monochlorobiphenyl (MonoCB) isomers, the chlorine atoms fully substituted at the ortho-positions have to be successively removed, with the first two dechlorinations preferentially occurring at the two different benzene rings. This is dissimilar to that of octachloronaphthalene (PCN-75) in which the hydrodechlorination reaction happened preferentially at ortho-position due to the existence of steric effects. The opposite roles of the steric effect in ortho-position between PCB-209 and PCN-75 might be due to the difference of the π-conjugated plane caused by the dihedral angle of 90° and 0° of the two aromatic rings. Copyright © 2015 Elsevier Ltd. All rights reserved.

PCB 28 metabolites elimination kinetics in human plasma on a real case scenario: Study of hydroxylated polychlorinated biphenyl (OH-PCB) metabolites of PCB 28 in a highly exposed German Cohort.

Science.gov (United States)

Quinete, Natalia; Esser, André; Kraus, Thomas; Schettgen, Thomas

2017-07-05

Polychlorinated biphenyls (PCBs) are suspected of carcinogenic, neurotoxic and immunotoxic effects in animals and humans. Although background levels of PCBs have been slowly decreased after their ban, they are still among the most persistent and ubiquitous pollutants in the environment, remaining the subject of great concern. PCB 28 is a trichlorinated PCB found in high concentrations not only in human plasma but also in indoor air in Europe, yet little is known about its metabolic pathway and potential metabolites in humans. The present study aims to elucidate the kinetics of metabolite formation and elimination by analyzing four hydroxylated PCBs (OH-PCBs) in human plasma as potential metabolites of the PCB 28 congener. For this purpose, the study was conducted in plasma samples of highly PCB-exposed individuals (N=268), collected from 2010 to 2014 as a representation of a real case scenario with longitudinal data. OH-PCBs have been predicted, synthesized in the course of this study and further identified and quantitated in human plasma. This is the first time that previously unknown PCB 28 metabolites have been measured in human plasma and half-lives have been estimated for PCB metabolites, which could then provide further understanding in the toxicological consequences of exposure to PCBs in humans. Copyright © 2017 Elsevier B.V. All rights reserved.

Gene Expression Commons: an open platform for absolute gene expression profiling.

Directory of Open Access Journals (Sweden)

Jun Seita

Full Text Available Gene expression profiling using microarrays has been limited to comparisons of gene expression between small numbers of samples within individual experiments. However, the unknown and variable sensitivities of each probeset have rendered the absolute expression of any given gene nearly impossible to estimate. We have overcome this limitation by using a very large number (>10,000 of varied microarray data as a common reference, so that statistical attributes of each probeset, such as the dynamic range and threshold between low and high expression, can be reliably discovered through meta-analysis. This strategy is implemented in a web-based platform named "Gene Expression Commons" (https://gexc.stanford.edu/ which contains data of 39 distinct highly purified mouse hematopoietic stem/progenitor/differentiated cell populations covering almost the entire hematopoietic system. Since the Gene Expression Commons is designed as an open platform, investigators can explore the expression level of any gene, search by expression patterns of interest, submit their own microarray data, and design their own working models representing biological relationship among samples.

On-Line Testing and Reconfiguration of Field Programmable Gate Arrays (FPGAs) for Fault-Tolerant (FT) Applications in Adaptive Computing Systems (ACS)

National Research Council Canada - National Science Library

Abramovici, Miron

2002-01-01

Adaptive computing systems (ACS) rely on reconfigurable hardware to adapt the system operation to changes in the external environment, and to extend mission capability by implementing new functions on the same hardware platform...

Run-Time HW/SW Scheduling of Data Flow Applications on Reconfigurable Architectures

Directory of Open Access Journals (Sweden)

Ghaffari Fakhreddine

2009-01-01

Full Text Available This paper presents an efficient dynamic and run-time Hardware/Software scheduling approach. This scheduling heuristic consists in mapping online the different tasks of a highly dynamic application in such a way that the total execution time is minimized. We consider soft real-time data flow graph oriented applications for which the execution time is function of the input data nature. The target architecture is composed of two processors connected to a dynamically reconfigurable hardware accelerator. Our approach takes advantage of the reconfiguration property of the considered architecture to adapt the treatment to the system dynamics. We compare our heuristic with another similar approach. We present the results of our scheduling method on several image processing applications. Our experiments include simulation and synthesis results on a Virtex V-based platform. These results show a better performance against existing methods.

Integrated reconfigurable microring based silicon WDM receiver for on-chip optical interconnect

International Nuclear Information System (INIS)

Shen, Ao; Yang, Long-Zhi; Dai, Ting-Ge; Hao, Yin-Lei; Jiang, Xiao-Qing; Yang, Jian-Yi; Qiu, Chen

2015-01-01

We demonstrate an integrated reconfigurable wavelength division multiplexing receiver on the silicon-on-insulator (SOI) platform. The receiver is composed of a 1 × 8 thermally tunable microring resonator filter and Ge–Si photodetectors. With low thermal tuning powers the channel allocation of the receiver can be reconfigured with high accuracy and flexibility. The thermal tuning efficiency is approximately 8 mW nm −1 . We show eight-channel configurations with channel spacing of 100 GHz and 50 GHz and a configuration in which all eight channels cover an entire free spectral range of the ring with uniform channel spacing of 1.2 nm. Each channel can receive high-quality signals with a data rate of up to 13.5 Gb s −1 ; thus an aggregate data rate higher than 100 Gb s −1 can be achieved. (paper)

Lipid rafts regulate PCB153-induced disruption of occludin and brain endothelial barrier function through protein phosphatase 2A and matrix metalloproteinase-2

Energy Technology Data Exchange (ETDEWEB)

Eum, Sung Yong, E-mail: seum@miami.edu; Jaraki, Dima; András, Ibolya E.; Toborek, Michal

2015-09-15

2A/MMP-2 induced PCB153-induced dysfunction of occludin. • Disrupted lipid rafts modulated PCB153-induced increase of permeability. • Lipid rafts act as a signaling platform for PCB153-induced dysfunction of occludin.

Developmental Exposure to an Environmental PCB Mixture ...

Science.gov (United States)

Developmental PCB exposure impairs hearing and induces brainstem audiogenic seizures in adult offspring. The degree to which this enhanced susceptibility to seizure is manifest in other brain regions has not been examined. Thus, electrical kindling of the amygdala was used to evaluate the effect of developmental exposure to an environmentally relevant PCB mixture on seizure susceptibility in the rat. Female Long-Evans rats were dosed orally with 0 or 6 mg/kg/day of the PCB mixture dissolved in corn oil vehicle during the perinatal period. On postnatal day (PND) 21, pups were weaned, and two males from each litter were randomly selected for the kindling study. As adults, the male rats were implanted bilaterally with electrodes in the basolateral amygdala. For each animal, afterdischarge (AD) thresholds in the amygdala were determined on the first day of testing followed by once daily stimulation at a standard 200 µA stimulus intensity until three stage 5 generalized seizures (GS) ensued. Developmental PCB exposure did not affect the AD threshold or total cumulative AD duration, but PCB exposure did increase the latency to behavioral manifestations of seizure propagation. PCB exposed animals required significantly more stimulations to reach stage 2 seizures compared to control animals, indicating an attenuated focal (amygdala) excitability. A delay in kindling progression from a focally stimulated limbic site stands in contrast to our previous finding of increase

21 CFR 109.30 - Tolerances for polychlorinated biphenyls (PCB's).

Science.gov (United States)

2010-04-01

... Tolerances for polychlorinated biphenyls (PCB's). (a) Polychlorinated biphenyls (PCB's) are toxic, industrial chemicals. Because of their widespread, uncontrolled industrial applications, PCB's have become a persistent... unavoidable environmental or industrial contaminants are established for a sufficient period of time following...

40 CFR 761.63 - PCB household waste storage and disposal.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false PCB household waste storage and..., AND USE PROHIBITIONS Storage and Disposal § 761.63 PCB household waste storage and disposal. PCB... to manage municipal or industrial solid waste, or in a facility with an approval to dispose of PCB...

A Multi-Technique Reconfigurable Electrochemical Biosensor: Enabling Personal Health Monitoring in Mobile Devices.

Science.gov (United States)

Sun, Alexander; Venkatesh, A G; Hall, Drew A

2016-10-01

This paper describes the design and characterization of a reconfigurable, multi-technique electrochemical biosensor designed for direct integration into smartphone and wearable technologies to enable remote and accurate personal health monitoring. By repurposing components from one mode to the next, the biosensor's potentiostat is able reconfigure itself into three different measurements modes to perform amperometric, potentiometric, and impedance spectroscopic tests all with minimal redundant devices. A [Formula: see text] PCB prototype of the module was developed with discrete components and tested using Google's Project Ara modular smartphone. The amperometric mode has a ±1 nA to [Formula: see text] measurement range. When used to detect pH, the potentiometric mode achieves a resolution of < 0.08 pH units. In impedance measurement mode, the device can measure 50 Ω-10 [Formula: see text] and has been shown to have of phase error. This prototype was used to perform several point-of-care health tracking assays suitable for use with mobile devices: 1) Blood glucose tests were conducted and shown to cover the diagnostic range for Diabetic patients (  ∼  200 mg/dL). 2) Lactoferrin, a biomarker for urinary tract infections, was detected with a limit of detection of approximately 1 ng/mL. 3) pH tests of sweat were conducted to track dehydration during exercise. 4) EIS was used to determine the concentration of NeutrAvidin via a label-free assay.

Kartlegging av PCB i sedimenter fra Indre Sørfjord

OpenAIRE

Skei, J.; Klungsøyr, J.

1990-01-01

Som følge av forhøyede nivåer av PCB i fiskelever innerst i Sørfjorden er det gjennomført en sedimentundersøkelse for om mulig å finne kilden til PCB. Det ble ikke registrert høye nivåer av PCB i sedimentene. Høyeste konsentrasjoner ble målt i munningen av Eitrheimsvågen. Analyser av trafooljer brukt i Tyssedalsområdet viste spor av PCB. Statens forurensningstilsyn (SFT)

Remediation of PCB [polychlorinated biphenyl] -contaminated soils from scrapyards

International Nuclear Information System (INIS)

MacKnight, S.

1991-01-01

Much of the recent attention on contamination of the environment by polychlorinated biphenyls (PCB) has focused on liquid PCB spills from electrical equipment. A new, and possibly more serious, source of PCB contamination is the scrap yard, typically located in or near major urban centers, where the local scrap dealer would purchase used transformers or other PCB-containing electrical equipment, recover copper and other metals, and dump the PCB-containing oils on the ground. With the rising value of urban and suburban lands, these scrap yards may be slated for redevelopment, making the cleanup of contaminated soils necessary. The heterogeneous distribution of scrap yard contaminants requires a very detailed site assessment, and the heterogeneous mixture of typical scrap yard contaminants (not only PCB) cannot be treated in a simple fashion. These problems are illustrated for the case of the assessment and cleanup of a scrap yard site in Nova Scotia. A grid block system was used to sample soil at the site, and samples were analyzed for PCB, metals, and hydrocarbons. The most severely contaminated spots were mapped; groundwater patterns were also examined. The remediation process can be divided into 5 phases: physical separation of uncontaminated material; three stages of separation of materials into those having single, several-but-similar, and multicomponent mixed contaminations; and selection of appropriate process technologies. Since there is currently no approved PCB destruction facility in Atlantic Canada, excavated soils containing PCB are stored securely on the site to await approval for some type of incineration process

Sampling methodology and PCB analysis

International Nuclear Information System (INIS)

Dominelli, N.

1995-01-01

As a class of compounds PCBs are extremely stable and resist chemical and biological decomposition. Diluted solutions exposed to a range of environmental conditions will undergo some preferential degradation and the resulting mixture may differ considerably from the original PCB used as insulating fluid in electrical equipment. The structure of mixtures of PCBs (synthetic compounds prepared by direct chlorination of biphenyl with chlorine gas) is extremely complex and presents a formidable analytical problem, further complicated by the presence of PCBs as contaminants in oils to soils to water. This paper provides some guidance into sampling and analytical procedures; it also points out various potential problems encountered during these processes. The guidelines provided deal with sample collection, storage and handling, sample stability, laboratory analysis (usually gas chromatography), determination of PCB concentration, calculation of total PCB content, and quality assurance. 1 fig

Gender difference in walleye PCB concentrations persists following remedial dredging

Science.gov (United States)

Madenjian, Charles P.; Jude, David J.; Rediske, Richard R.; O'Keefe, James P.; Noguchi, George E.

2009-01-01

Eleven male walleyes (Sander vitreus) and 10 female walleyes from the Saginaw Bay (Lake Huron) population were caught during the spawning run at Dow Dam (Midland, Michigan) in the Tittabawassee River during April 1996, and individual whole-fish polychlorinated biphenyl (PCB) determinations were made. Total PCB concentrations averaged 7.95 and 3.17??mg/kg for males and females, respectively. As part of the Natural Resource Damage Assessment remediation process, contaminated sediments from the Saginaw River, the main tributary to Saginaw Bay, were removed during 2000 and 2001. Total PCB concentrations of 10 male and 10 female walleyes caught at Dow Dam during April 2007 averaged 1.58 and 0.55??mg/kg, respectively. Thus, dredging of the Saginaw River appeared to be effective in reducing PCB concentrations of Saginaw Bay adult walleyes, as both males and females decreased in PCB concentration by more than 80% between 1996 and 2007. However, the ratio of male PCB concentration to female PCB concentration did not decline between 1996 and 2007. This persistent gender difference in PCB concentrations was apparently due to a gender difference in habitat utilization coupled with a persistent spatial gradient in prey fish PCB concentrations from the Saginaw River to Lake Huron.

Easy Reconfiguration of Modular Industrial Collaborative Robots

DEFF Research Database (Denmark)

Schou, Casper

2016-01-01

the production staff collaborating to perform common tasks. This change of environment imposes a much more dynamic lifecycle for the robot which consequently requires new ways of interacting. This thesis investigates how the changeover to a new task on a collaborative robot can be performed by the shop floor...... operators already working alongside the robot. To effectively perform this changeover, the operator must both reconfigure the hardware of the robot and reprogram the robot to match the new task. To enable shop floor operators to quickly and intuitively program the robot, this thesis proposes the use...... of parametric, task-related robot skills with a manual parameterization method. Reconfiguring the hardware entails adding, removing, or modifying some of the robot’s components. This thesis investigate how software configurator tools can aid the operator in selecting appropriate hardware modules, and how agent...

A New Generation of Telecommunications for Mars: The Reconfigurable Software Radio

Science.gov (United States)

Adams, J.; Horne, W.

2000-01-01

Telecommunications is a critical component for any mission at Mars as it is an enabling function that provides connectivity back to Earth and provides a means for conducting science. New developments in telecommunications, specifically in software - configurable radios, expand the possible approaches for science missions at Mars. These radios provide a flexible and re-configurable platform that can evolve with the mission and that provide an integrated approach to communications and science data processing. Deep space telecommunication faces challenges not normally faced by terrestrial and near-earth communications. Radiation, thermal, highly constrained mass, volume, packaging and reliability all are significant issues. Additionally, once the spacecraft leaves earth, there is no way to go out and upgrade or replace radio components. The reconfigurable software radio is an effort to provide not only a product that is immediately usable in the harsh space environment but also to develop a radio that will stay current as the years pass and technologies evolve.

PCB in soils and estimated soil-air exchange fluxes of selected PCB congeners in the south of Sweden

International Nuclear Information System (INIS)

Backe, Cecilia; Cousins, Ian T.; Larsson, Per

2004-01-01

PCB concentrations were studied in different soils to determine the spatial variation over a region of approximately 11 000 km 2 . PCB congener pattern was used to illustrate the spatial differences, as shown by principal component analysis (PCA). The relationship to different soil parameters was studied. PCB concentrations in soil showed a large variation between sampling-areas with median concentrations ranging between 2.3 and 332 ng g -1 (dw). Highest concentrations were found at two sites with sandy soils, one with extremely high organic carbon content. Both sites were located on the west coast of southern Sweden. Soils with similar soil textures (i.e. sandy silt moraine) did not show any significant differences in PCB concentrations. PCB congener composition was shown to differ between sites, with congener patterns almost site-specific. PCB in air and precipitation was measured and the transfer of chemicals between the soil and air compartments was estimated. Soil-air fugacity quotient calculations showed that the PCBs in the soil consistently had a higher fugacity than the PCBs in the air, with a median quotient value of 2.7. The gaseous fluxes between soil and air were estimated using standard modelling equations and a net soil-air flux estimated by subtracting bulk deposition from gaseous soil-air fluxes. It was shown that inclusion of vertical sorbed phase transport of PCBs in the soil had a large effect on the direction of the net soil-air exchange fluxes. - Soil-air exchange of PCBs is investigated and modelled across Sweden

MEMS-Reconfigurable Metamaterials and Antenna Applications

Directory of Open Access Journals (Sweden)

Tomislav Debogovic

2014-01-01

Full Text Available This paper reviews some of our contributions to reconfigurable metamaterials, where dynamic control is enabled by microelectromechanical systems (MEMS technology. First, we show reconfigurable composite right-/left-handed transmission lines (CRLH-TLs having state of the art phase velocity variation and loss, thereby enabling efficient reconfigurable phase shifters and leaky-wave antennas (LWA. Second, we present very low loss metasurface designs with reconfigurable reflection properties, applicable in reflectarrays and partially reflective surface (PRS antennas. All the presented devices have been fabricated and experimentally validated. They operate in X- and Ku-bands.

Dynamic Reconfiguration in Planetary Exploration

DEFF Research Database (Denmark)

Cohn, Marisa

2014-01-01

In taking into account the ways in which material and social realms are constitutively entangled within organizations, it is rhetorically tempting to say that technologies and social structures reconfigure each other. But what does it mean to reconfigure? How does one "figure" the other and how do...... we fully embrace a mutually constitutive relationship when examining fluid relations? This paper delves into these questions by exploring how physical, social, material, technological, and organizational arrangements dynamically reconfigure each other in the duration of organizational practice. Using...... be gained by focusing attention on the dynamic reconfigurations between social and material realms. In so doing, we call attention to the ways in which current sociomaterial perspectives have difficulty articulating the shifting, figural, asymmetric and dynamic negotiations between people, social structures...

Program Execution on Reconfigurable Multicore Architectures

Directory of Open Access Journals (Sweden)

Sanjiva Prasad

2016-06-01

Full Text Available Based on the two observations that diverse applications perform better on different multicore architectures, and that different phases of an application may have vastly different resource requirements, Pal et al. proposed a novel reconfigurable hardware approach for executing multithreaded programs. Instead of mapping a concurrent program to a fixed architecture, the architecture adaptively reconfigures itself to meet the application's concurrency and communication requirements, yielding significant improvements in performance. Based on our earlier abstract operational framework for multicore execution with hierarchical memory structures, we describe execution of multithreaded programs on reconfigurable architectures that support a variety of clustered configurations. Such reconfiguration may not preserve the semantics of programs due to the possible introduction of race conditions arising from concurrent accesses to shared memory by threads running on the different cores. We present an intuitive partial ordering notion on the cluster configurations, and show that the semantics of multithreaded programs is always preserved for reconfigurations "upward" in that ordering, whereas semantics preservation for arbitrary reconfigurations can be guaranteed for well-synchronised programs. We further show that a simple approximate notion of efficiency of execution on the different configurations can be obtained using the notion of amortised bisimulations, and extend it to dynamic reconfiguration.

Parametric Design and Rapid Prototyping of Installation Box for Vehicle Terminal PCB

Directory of Open Access Journals (Sweden)

Wang Xingxing

2016-01-01

Full Text Available Installation box for vehicle terminal PCB (Printed Circuit Board was took as research object, which is encountered in the process of project developing. Vehicle terminal PCB in actual development process was set as an example, point cloud data were acquired by three coordinate measuring method; Imageware software was used to reconstruct the vehicle terminal PCB model, basic size parameters of vehicle terminal PCB can be got and then design parameters of installation box for vehicle terminal PCB can be determined. Design of the installation box for vehicle terminal PCB was completed based on Solidworks software, then 3D modeling and 2D drawing of installation box for vehicle terminal PCB was gained. Up Plus 2 rapid prototype machine was used to manufacture installation box for vehicle terminal PCB rapidly based on 3D printing technology, then prototype of installation box for vehicle terminal PCB was obtained. It is of certain engineering significant for single (small amount manufacturing of installation box for general PCB.

Economical weight loss program for PCB-contaminated ballasts

International Nuclear Information System (INIS)

Day, B.

1995-01-01

A PCB (Polychlorinated Biphenyls) reduction process for PCB-contaminated ballasts was described. The process was developed by such organizations and programs as PCB Containment Technology Inc, and the Contech Ballast Reduction Program, and was claimed to include waste reduction of lighting ballasts down to their smallest PCB contaminated components. Particular attention was paid to the two most contaminated main components, i.e. the capacitor and the tar potting material. Development of the process and the government's role and participation therein was explained. The process of ballast reduction was said to utilize the old 'Reduce, Reuse and Recycle' theory; it was considered to be a cost effective waste reduction, recycling, and auditing alternative to incineration of PCBs

Laboratory study of PCB transport from primary sources to settled dust

Science.gov (United States)

Transport of house dust and Arizona Test Dust on polychlorinated biphenyl (PCB)-containing panels and PCB-free panels was investigated in a 30-m3 stainless steel chamber. The PCB-containing panels were aluminum sheets coated with a PCB-spiked, oil-based primer or two-part polysul...

40 CFR 761.269 - Sampling liquid PCB remediation waste.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Sampling liquid PCB remediation waste..., AND USE PROHIBITIONS Cleanup Site Characterization Sampling for PCB Remediation Waste in Accordance with § 761.61(a)(2) § 761.269 Sampling liquid PCB remediation waste. (a) If the liquid is single phase...

Integrated reconfigurable photonic filters based on interferometric fractional Hilbert transforms.

Science.gov (United States)

Sima, C; Cai, B; Liu, B; Gao, Y; Yu, Y; Gates, J C; Zervas, M N; Smith, P G R; Liu, D

2017-10-01

In this paper, we present integrated reconfigurable photonic filters using fractional Hilbert transformers (FrHTs) and optical phase tuning structure within the silica-on-silicon platform. The proposed structure, including grating-based FrHTs, an X-coupler, and a pair of thermal tuning filaments, is fabricated through the direct UV grating writing technique. The thermal tuning effect is realized by the controllable microheaters located on the two arms of the X-coupler. We investigate the 200 GHz maximum bandwidth photonic FrHTs based on apodized planar Bragg gratings, and analyze the reflection spectrum responses. Through device integration and thermal modulation, the device could operate as photonic notch filters with 5 GHz linewidth and controllable single sideband suppression filters with measured 12 dB suppression ratio. A 50 GHz instantaneous frequency measuring system using this device is also schematically proposed and analyzed with potential 3 dB measurement improvement. The device could be configured with these multiple functions according to need. The reconfigurable structure has great potential in ultrafast all-optical signal processing fields.

Accelerating artificial intelligence with reconfigurable computing

Science.gov (United States)

Cieszewski, Radoslaw

Reconfigurable computing is emerging as an important area of research in computer architectures and software systems. Many algorithms can be greatly accelerated by placing the computationally intense portions of an algorithm into reconfigurable hardware. Reconfigurable computing combines many benefits of both software and ASIC implementations. Like software, the mapped circuit is flexible, and can be changed over the lifetime of the system. Similar to an ASIC, reconfigurable systems provide a method to map circuits into hardware. Reconfigurable systems therefore have the potential to achieve far greater performance than software as a result of bypassing the fetch-decode-execute operations of traditional processors, and possibly exploiting a greater level of parallelism. Such a field, where there is many different algorithms which can be accelerated, is an artificial intelligence. This paper presents example hardware implementations of Artificial Neural Networks, Genetic Algorithms and Expert Systems.

An overlooked environmental issue? A review of the inadvertent formation of PCB-11 and other PCB congeners and their occurrence in consumer products and in the environment.

Science.gov (United States)

Vorkamp, Katrin

2016-01-15

Polychlorinated biphenyls (PCBs) are banned from production and use in most countries as they are persistent organic pollutants (POPs) of concern for environment and health. Recent research has pointed at a new environment issue resulting from the inadvertent formation of PCBs in certain processes, in particular the pigment production. PCB-11 is a major by-product in these processes, but PCB-28, PCB-52, PCB-77 as well as the nonachlorinated PCBs and PCB-209 have been found in pigments and consumer products as well. In addition to environmental emissions via point sources, in particular related to industrial and municipal wastewater, atmospheric transport seems to be important for the global distribution of PCB-11. Thus, PCB-11 has also been detected in the polar regions. Worldwide air concentrations appear relatively uniform, but maxima have been found in urban and industrialised areas. Data on the uptake and accumulation of PCB-11 in the food chain are still inconclusive: Although food web studies do not show biomagnification, PCB-11 has been detected in humans. The human exposure might originate from the direct contact to consumer products as well as from the omnipresence of PCB-11 in the environment. Copyright © 2015 Elsevier B.V. All rights reserved.

Wave Manipulation in Metamaterials: A LEGO® Bricks Enabled Platform

Science.gov (United States)

Celli, Paolo; Gonella, Stefano

In this work, we show how simple, reconfigurable arrangements of LEGO® bricks can be turned into the building blocks of an experimental platform for the investigation of wave phenomena in metamaterial architectures. The approach involves the assembly of reconfigurable specimens consisting of patterns of bricks on a baseplate and the use of a 3D laser vibrometer to reconstruct global and local wave features. The ability to seamlessly transition between different topologies makes this an effective approach for rapid experimental verification and proof of concept in the arena of mechanical metamaterials engineering. The intuitive nature of the brick-and-baseplate assembly paradigm can also be leveraged to implement families of intuitive lab demonstrations with significant didactic and scientific outreach potential. The versatility of the platform is tested through a series of experiments that illustrate a variety of wave manipulation effects, such as waveguiding and seismic isolation, both in periodic and disordered topologies. We acknowledge the support of the National Science Foundation (Grant CMMI-1266089).

Manipulating waves with LEGO® bricks: A versatile experimental platform for metamaterial architectures

International Nuclear Information System (INIS)

Celli, Paolo; Gonella, Stefano

2015-01-01

In this letter, we discuss a versatile, fully reconfigurable experimental platform for the investigation of phononic phenomena in metamaterial architectures. The approach revolves around the use of 3D laser vibrometry to reconstruct global and local wavefield features in specimens obtained through simple arrangements of LEGO ® bricks on a thin baseplate. The agility by which it is possible to reconfigure the brick patterns into a nearly endless spectrum of topologies makes this an effective approach for rapid experimental proof of concept, as well as a powerful didactic tool, in the arena of phononic crystals and metamaterials engineering. We use our platform to provide a compelling visual illustration of important spatial wave manipulation effects (waveguiding and seismic isolation), and to elucidate fundamental dichotomies between Bragg-based and locally resonant bandgap mechanisms

Manipulating waves with LEGO bricks: A versatile experimental platform for metamaterial architectures

Science.gov (United States)

Celli, Paolo; Gonella, Stefano

2015-08-01

In this letter, we discuss a versatile, fully reconfigurable experimental platform for the investigation of phononic phenomena in metamaterial architectures. The approach revolves around the use of 3D laser vibrometry to reconstruct global and local wavefield features in specimens obtained through simple arrangements of LEGO® bricks on a thin baseplate. The agility by which it is possible to reconfigure the brick patterns into a nearly endless spectrum of topologies makes this an effective approach for rapid experimental proof of concept, as well as a powerful didactic tool, in the arena of phononic crystals and metamaterials engineering. We use our platform to provide a compelling visual illustration of important spatial wave manipulation effects (waveguiding and seismic isolation), and to elucidate fundamental dichotomies between Bragg-based and locally resonant bandgap mechanisms.

Comment on linking the sex difference in PCB concentrations of fish to release of eggs at spawning: Time to jettison the dogma

Science.gov (United States)

Madenjian, Charles P.

2017-01-01

For the past 20 years or so, a commonly used explanation in the scientific literature for higher polychlorinated biphenyl (PCB) concentrations in male fish than in female fish has been that females lose a high proportion of their PCB body burden by releasing eggs at spawning time, and therefore the females undergo a substantial decrease in their PCB concentration immediately after spawning due to shedding of their eggs [1]. Indeed, this explanation can be viewed as the conventional wisdom used by toxicologists to account for differences in PCB concentrations between the sexes of fish. On the surface, this explanation seems plausible. PCBs are lipid soluble, and eggs are thought to be relatively high in lipid concentration. If a sufficiently high proportion of the PCB body burden within a female fish is transferred to the eggs, then the release of eggs at spawning would be expected to result in a dramatic decrease in the PCB concentration of the female.

Comparison of the in vitro effects of TCDD, PCB 126 and PCB 153 on thyroid-restricted gene expression and thyroid hormone secretion by the chicken thyroid gland.

Science.gov (United States)

Katarzyńska, Dorota; Hrabia, Anna; Kowalik, Kinga; Sechman, Andrzej

2015-03-01

The aim of this study was to compare the in vitro effects of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), 3,3',4,4',5-pentachlorobiphenyl (PCB 126; a coplanar PCB congener) and 2,2'4,4',5,5'-hexachlorobiphenyl (PCB153; non-coplanar PCB) on mRNA expression of thyroid-restricted genes, i.e. sodium iodide symporter (NIS), thyroid peroxidase (TPO) and thyroglobulin (TG), and thyroid hormone secretion from the thyroid gland of the laying chicken. Relative expression levels of NIS, TG and TPO genes and thyroxine (T4) and triiodothyronine (T3) secretion from the thyroidal explants were quantified by the real-time qPCR and RIA methods, respectively. In comparison with the control group, TCDD and PCB 126 significantly increased mRNA expression of TPO and TG genes. TCDD did not affect NIS mRNA levels, but PCB 126 decreased its expression. No effect of PCB 153 on the expression of these genes was observed. TCDD and PCB 126 significantly decreased T4 and T3 secretion. There was no significant effect of PCB 153 on these hormone secretions. In conclusion, the results obtained show that in comparison with non-coplanar PCB 153, TCDD and coplanar PCB 126 can directly affect thyroid hormone synthesis and secretion, and in consequence, they may disrupt the endocrine function of the thyroid gland of the laying chicken. Copyright © 2015 Elsevier B.V. All rights reserved.

Space Station Freedom electrical power system hardware commonality with the United States Polar Platform

Science.gov (United States)

Rieker, Lorra L.; Haraburda, Francis M.

1989-01-01

Information is presented on how the concept of commonality is being implemented with respect to electric power system hardware for the Space Station Freedom and the U.S. Polar Platform. Included is a historical account of the candidate common items which have the potential to serve the same power system functions on both Freedom and the Polar Platform. The Space Station program and objectives are described, focusing on the test and development responsibilities. The program definition and preliminary design phase and the design and development phase are discussed. The goal of this work is to reduce the program cost.

Implementing Workflow Reconfiguration in WS-BPEL

DEFF Research Database (Denmark)

Mazzara, Manuel; Dragoni, Nicola; Zhou, Mu

2012-01-01

This paper investigates the problem of dynamic reconfiguration by means of a workflow-based case study used for discussion. We state the requirements on a system implementing the workflow and its reconfiguration, and we describe the system’s design in BPMN. WS-BPEL, a language that would not natu......This paper investigates the problem of dynamic reconfiguration by means of a workflow-based case study used for discussion. We state the requirements on a system implementing the workflow and its reconfiguration, and we describe the system’s design in BPMN. WS-BPEL, a language that would...... not naturally support dynamic change, is used as a target for implementation. The WS-BPEL recovery framework is here exploited to implement the reconfiguration using principles derived from previous research in process algebra and two mappings from BPMN to WS-BPEL are presented, one automatic and only mostly...

An Automated Test Framework for Experimenting with Stochastic Behavior in Reconfigurable Logic

DEFF Research Database (Denmark)

Birklykke, Alex Aaen; Le Moullec, Yannick; Alminde, Lars

2012-01-01

In this paper, we present an automated test frame- work for the characterization of stochastic behavior in logic circuits. The framework is intended as a platform for experimenting with and providing statistics on digital architectures given behavioral uncertainties at the gate-level. As an exper......In this paper, we present an automated test frame- work for the characterization of stochastic behavior in logic circuits. The framework is intended as a platform for experimenting with and providing statistics on digital architectures given behavioral uncertainties at the gate...... block subject to voltage/frequency scaling and Vdd -noise. The framework provides easy interfacing with laboratory equipment, design of experiment capabilities and automatic test execution, thus providing a powerful tool for characterizing stochastic behavior in reconfigurable logic....

Measurement of hydroxylated PCB metabolites for Slovakia maternal blood serums

Energy Technology Data Exchange (ETDEWEB)

Park, J.S.; Athanasiadou, M; Bergman, A. [Stockholm Univ., Stockholm (Sweden); Charles, J.; Zhao, G.; Hertz-Picciotto, I. [California Univ., Sacramento, CA (United States); Petrik, J.; Kocan, A; Trnovec, T. [Bratislava Inst. of Preventive and Clinical Medicine, Bratislava (Slovakia)

2005-07-01

Although it is known that polychlorinated biphenyls (PCBs) have adverse impacts on human health, it is not clear if human health impacts are caused by the PCBs or their related hydroxylated (OH) PCB metabolite compounds. This study measured OH-PCB metabolites in the maternal blood serum specimens from the Svidnik and Michalovce areas in eastern Slovakia where PCBs were intensively produced and inadequately disposed. The aim of the study was to characterize and quantify levels of specific OH-PCB metabolites in Slovakian maternal serums exposed to high environmental PCB levels. All specimens were analyzed for PCBs, and a subset of the samples was analyzed for OH-PCB metabolites. The Wallenburg blood extraction method was adopted to separate the OH-PCBs from the blood serums. Final eluates and calibration standards were spiked with PCB209 as an injection standard before gas chromatography (GC) analysis. OH-PCBs in the samples range from 75{+-}9 per cent to 101{+-}11 per cent. Median concentrations of OH-PCB metabolites of Michalovce samples were approximately twice as high as for the Svidnik samples. Concentrations of OH-PCBs of Michalovce blood samples were comparable to samples obtained from northern Canadian female Inuit and Faroe Island females, and were considered to be among the highest OH-PCB concentrations obtained in human blood. It was concluded that further research is needed to understand the placental transfer of OH-PCBs to the fetus, as well as epidemiological approaches to determine the relationship between the exposure of OH-PCB metabolites and child development. 12 refs., 2 figs.

Trustworthy reconfigurable systems enhancing the security capabilities of reconfigurable hardware architectures

CERN Document Server

Feller, Thomas

2014-01-01

?Thomas Feller sheds some light on trust anchor architectures fortrustworthy reconfigurable systems. He is presenting novel concepts enhancing the security capabilities of reconfigurable hardware.Almost invisible to the user, many computer systems are embedded into everyday artifacts, such as cars, ATMs, and pacemakers. The significant growth of this market segment within the recent years enforced a rethinking with respect to the security properties and the trustworthiness of these systems. The trustworthiness of a system in general equates to the integrity of its system components. Hardware-b

Measurement of PCB concentrations in waters using a biomonitoring programme

International Nuclear Information System (INIS)

Mast, P.G.

1993-01-01

The book describes a PCB biomonitoring programme which was developed for measuring instantaneous PCB concentrations and permits the compilation of PCB action cadastres for different types of waters and subsequent derivation of current trends. Six representative congeners were selected as a basis for the quantitative routine analysis. The fish species bream (abramis brama) and roach (rutilus rutilus) were used as indicators in the PCB biomonitoring programme on account of their distribution and ecological demands. The age and growth rate of each fish destined for analysis was determined so as to ensure that only healthy fish would be used. In both fish species the dorsal musulature with its low scatter of test results and consistent PCB pattern (internal quantification) proved a representative body region. (orig.) [de

Simultaneous electrodialytic removal of PAH, PCB, TBT and heavy metals from sediments.

Science.gov (United States)

Pedersen, Kristine B; Lejon, Tore; Jensen, Pernille E; Ottosen, Lisbeth M

2017-08-01

Contaminated sediments are remediated in order to protect human health and the environment, with the additional benefit of using the treated sediments for other activities. Common for many polluted sediments is the contamination with several different pollutants, making remediation challenging with the need of different remedial actions for each pollutant. In this study, electrodialytic remediation (EDR) of sediments was found effective for simultaneous removal of heavy metals and organic pollutants for sediments from Arctic regions - Sisimiut in Greenland and Hammerfest in Norway. The influence of sediment properties and experimental settings on the remediation process was studied by employing multivariate analysis. The importance of the variables studied varied with the pollutant and based on these results it was possible to assess removal processes for the different pollutants. Desorption was found to be important for the removal of heavy metals and TBT, while photolysis was significant for removal of PAH, PCB and TBT. In addition, dechlorination was found to be important for the removal of PCB. The highest removal efficiencies were found for heavy metals, TBT and PCB (>40%) and lower removal efficiencies for PAH (<35%). Copyright © 2017 Elsevier Ltd. All rights reserved.

Sexual difference in PCB concentrations of coho salmon (Oncorhynchus kisutch)

Science.gov (United States)

Madenjian, Charles P.; Schrank, Candy S.; Begnoche, Linda J.; Elliott, Robert F.; Quintal, Richard T.

2010-01-01

We determined polychlorinated biphenyl (PCB) concentrations in 35 female coho salmon (Oncorhynchus kisutch) and 60 male coho salmon caught in Lake Michigan (Michigan and Wisconsin, United States) during the fall of 1994 and 1995. In addition, we determined PCB concentrations in the skin-on fillets of 26 female and 19 male Lake Michigan coho salmon caught during the fall of 2004 and 2006. All coho salmon were age-2 fish. These fish were caught prior to spawning, and therefore release of eggs could not account for sexual differences in PCB concentrations because female coho salmon spawn only once during their lifetime. To investigate whether gross growth efficiency (GGE) differed between the sexes, we applied bioenergetics modeling. Results showed that, on average, males were 19% higher in PCB concentration than females, based on the 1994–1995 dataset. Similarly, males averaged a 20% higher PCB concentration in their skin-on fillets compared with females. According to the bioenergetics modeling results, GGE of adult females was less than 1% higher than adult male GGE. Thus, bioenergetics modeling could not explain the 20% higher PCB concentration exhibited by the males. Nonetheless, a sexual difference in GGE remained a plausible explanation for the sexual difference in PCB concentrations.

Reconfigurable Autonomy for Future Planetary Rovers

Science.gov (United States)

Burroughes, Guy

Extra-terrestrial Planetary rover systems are uniquely remote, placing constraints in regard to communication, environmental uncertainty, and limited physical resources, and requiring a high level of fault tolerance and resistance to hardware degradation. This thesis presents a novel self-reconfiguring autonomous software architecture designed to meet the needs of extraterrestrial planetary environments. At runtime it can safely reconfigure low-level control systems, high-level decisional autonomy systems, and managed software architecture. The architecture can perform automatic Verification and Validation of self-reconfiguration at run-time, and enables a system to be self-optimising, self-protecting, and self-healing. A novel self-monitoring system, which is non-invasive, efficient, tunable, and autonomously deploying, is also presented. The architecture was validated through the use-case of a highly autonomous extra-terrestrial planetary exploration rover. Three major forms of reconfiguration were demonstrated and tested: first, high level adjustment of system internal architecture and goal; second, software module modification; and third, low level alteration of hardware control in response to degradation of hardware and environmental change. The architecture was demonstrated to be robust and effective in a Mars sample return mission use-case testing the operational aspects of a novel, reconfigurable guidance, navigation, and control system for a planetary rover, all operating in concert through a scenario that required reconfiguration of all elements of the system.

Treating PCB contaminated light ballasts

International Nuclear Information System (INIS)

Day, B.

1995-01-01

Development and salient features of CON TECH PCB, a light ballast reduction process to allow PCB waste owners to best utilize storage space for the long-term regulated storage of PCBs, or to prepare them for final destruction and to reduce destruction costs, was reviewed. The essence of the process is ballast splitting, i.e. the breaking of the ballast and removing the capacitor containing the toxic PCBs. The work is done in a specially fitted mobile processing unit, thus reducing the storage requirements by better than 50 per cent. Details of the process and some cost and storage facility estimates were provided

Mono-, di-, and trichlorinated biphenyls (PCB 1-PCB 39) in the indoor air of office rooms and their relevance on human blood burden.

Science.gov (United States)

Kraft, M; Sievering, S; Grün, L; Rauchfuss, K

2018-05-01

Exposure to polychlorinated biphenyls (PCBs) from indoor air can lead to a significant increase in lower chlorinated congeners in human blood. Lower chlorinated congeners with short biological half-lives can exhibit an indirect genotoxic potential via their highly reactive metabolites. However, little is known about their occurrence in indoor air and, therefore, about the effects of possible exposure to these congeners. We analyzed all mono-, di-, and trichlorinated biphenyls in the indoor air of 35 contaminated offices, as well as in the blood of the 35 individuals worked in these offices for a minimum of 2 years. The median concentration of total PCB in the indoor air was 479 ng/m 3 . The most prevalent PCBs in the indoor air samples were the trichlorinated congeners PCB 31, PCB 18, and PCB 28, with median levels of 39, 31, and 26 ng/m 3 , respectively. PCB 8 was the most prevalent dichlorinated congener (median: 9.1 ng/m 3 ). Monochlorinated biphenyls were not detected in relevant concentrations. In the blood samples, the most abundant congener was PCB 28; nearly 90% of all mono-, di-, and trichlorinated congeners were attributed to this congener (median: 12 ng/g blood lipid). © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Facilitating preemptive hardware system design using partial reconfiguration techniques.

Science.gov (United States)

Dondo Gazzano, Julio; Rincon, Fernando; Vaderrama, Carlos; Villanueva, Felix; Caba, Julian; Lopez, Juan Carlos

2014-01-01

In FPGA-based control system design, partial reconfiguration is especially well suited to implement preemptive systems. In real-time systems, the deadline for critical task can compel the preemption of noncritical one. Besides, an asynchronous event can demand immediate attention and, then, force launching a reconfiguration process for high-priority task implementation. If the asynchronous event is previously scheduled, an explicit activation of the reconfiguration process is performed. If the event cannot be previously programmed, such as in dynamically scheduled systems, an implicit activation to the reconfiguration process is demanded. This paper provides a hardware-based approach to explicit and implicit activation of the partial reconfiguration process in dynamically reconfigurable SoCs and includes all the necessary tasks to cope with this issue. Furthermore, the reconfiguration service introduced in this work allows remote invocation of the reconfiguration process and then the remote integration of off-chip components. A model that offers component location transparency is also presented to enhance and facilitate system integration.

Manipulating waves with LEGO{sup ®} bricks: A versatile experimental platform for metamaterial architectures

Energy Technology Data Exchange (ETDEWEB)

Celli, Paolo, E-mail: pcelli@umn.edu; Gonella, Stefano, E-mail: sgonella@umn.edu [Department of Civil, Environmental, and Geo- Engineering, University of Minnesota, Minneapolis, Minnesota 55455 (United States)

2015-08-24

In this letter, we discuss a versatile, fully reconfigurable experimental platform for the investigation of phononic phenomena in metamaterial architectures. The approach revolves around the use of 3D laser vibrometry to reconstruct global and local wavefield features in specimens obtained through simple arrangements of LEGO{sup ®} bricks on a thin baseplate. The agility by which it is possible to reconfigure the brick patterns into a nearly endless spectrum of topologies makes this an effective approach for rapid experimental proof of concept, as well as a powerful didactic tool, in the arena of phononic crystals and metamaterials engineering. We use our platform to provide a compelling visual illustration of important spatial wave manipulation effects (waveguiding and seismic isolation), and to elucidate fundamental dichotomies between Bragg-based and locally resonant bandgap mechanisms.

Elements of Autonomous Self-Reconfigurable Robots

DEFF Research Database (Denmark)

Christensen, David Johan

In this thesis, we study several central elements of autonomous self-reconfigurable modular robots. Unlike conventional robots such robots are: i) Modular, since robots are assembled from numerous robotic modules. ii) Reconfigurable, since the modules can be combined in a variety of ways. iii) Self......-reconfigurable, since the modules themselves are able to change how they are combined. iv) Autonomous, since robots control themselves without human guidance. Such robots are attractive to study since they in theory have several desirable characteristics, such as versatility, reliability and cheapness. In practice...... however, it is challenging to realize such characteristics since state-of-the-art systems and solutions suffer from several inherent technical and theoretical problems and limitations. In this thesis, we address these challenges by exploring four central elements of autonomous self-reconfigurable modular...

Bioavailability of 2,3',4,4',5-pentachlorobiphenyl (PCB118) and 2,2',5,5'-tetrachlorobiphenyl (PCB52) from soils using a rat model and a physiologically based extraction test

International Nuclear Information System (INIS)

Pu Xinzhu; Lee, Linda S.; Galinsky, Raymond E.; Carlson, Gary P.

2006-01-01

The bioavailability of coplanar 2,3',4,4',5-pentachlorobiphenyl (PCB118) and nonplanar 2,2',5,5'-tetrachlorobiphenyl (PCB52) from soils representing a range in organic carbon (OC), clay content and pH were investigated using an in vivo rat model and an in vitro physiologically based extraction test (PBET) to assess the role of soil and chemical properties on bioavailabilty. Affinity to soil and persistence of PCBs have been shown to increase with increasing soil organic carbon (OC) content, PCB chlorination, and PCB coplanarity. In the in vivo tests for both PCB118 and PCB52, the AUCs following iv injection were significantly higher than the AUCs for all soil groups, indicating that the soil matrix can reduce the absolute bioavailability of PCB118 and PCB52. However, no significant differences were detected between soils of different properties. In the in vitro PBET, significant differences in the mobilization of PCB118 and PCB52 were observed among soils, and PCBs had the least mobilization from the soil with the highest OC content consistent with hydrophobic partitioning theory. Also, significantly less PCB118 was mobilized relative to PCB52 in the PBET assay, showing the potential impact of spatial orientation and chlorine content on bioavailability. No correlation between the in vitro PBET and the in vivo rat model was observed for the PCBs. Although the in vitro PBET and related assays may serve as an indicator of bioavailability, it is likely to underestimate what can be released from a soil in an in vivo assay

Radioactive and non-radioactive polychlorinated biphenyl (PCB) management at Hanford

International Nuclear Information System (INIS)

Leonard, W.W.; Gretzinger, R.F.; Cox, G.R.

1986-01-01

Conformance to all state and federal regulations is the goal of Rockwell in the management of both radioactive and non-radioactive PCB's at Hanford. A continuing effort is being made to locate, remove, and properly dispose of all PCB's. As improved methods of management are developed, consideration will be given to them for their adaptation into the Hanford Site PCB Management Plan

Reconfigurable virtual electrowetting channels.

Science.gov (United States)

Banerjee, Ananda; Kreit, Eric; Liu, Yuguang; Heikenfeld, Jason; Papautsky, Ian

2012-02-21

Lab-on-a-chip systems rely on several microfluidic paradigms. The first uses a fixed layout of continuous microfluidic channels. Such lab-on-a-chip systems are almost always application specific and far from a true "laboratory." The second involves electrowetting droplet movement (digital microfluidics), and allows two-dimensional computer control of fluidic transport and mixing. The merging of the two paradigms in the form of programmable electrowetting channels takes advantage of both the "continuous" functionality of rigid channels based on which a large number of applications have been developed to date and the "programmable" functionality of digital microfluidics that permits electrical control of on-chip functions. In this work, we demonstrate for the first time programmable formation of virtual microfluidic channels and their continuous operation with pressure driven flows using an electrowetting platform. Experimental, theoretical, and numerical analyses of virtual channel formation with biologically relevant electrolyte solutions and electrically-programmable reconfiguration are presented. We demonstrate that the "wall-less" virtual channels can be formed reliably and rapidly, with propagation rates of 3.5-3.8 mm s(-1). Pressure driven transport in these virtual channels at flow rates up to 100 μL min(-1) is achievable without distortion of the channel shape. We further demonstrate that these virtual channels can be switched on-demand between multiple inputs and outputs. Ultimately, we envision a platform that would provide rapid prototyping of microfluidic concepts and would be capable of a vast library of functions and benefitting applications from clinical diagnostics in resource-limited environments to rapid system prototyping to high throughput pharmaceutical applications.

Silicon Processors Using Organically Reconfigurable Techniques (SPORT)

Science.gov (United States)

2014-05-19

AFRL-OSR-VA-TR-2014-0132 SILICON PROCESSORS USING ORGANICALLY RECONFIGURABLE TECHNIQUES ( SPORT ) Dennis Prather UNIVERSITY OF DELAWARE Final Report 05...5a. CONTRACT NUMBER Silicon Processes for Organically Reconfigurable Techniques ( SPORT ) 5b. GRANT NUMBER FA9550-10-1-0363 5c...Contract: Silicon Processes for Organically Reconfigurable Techniques ( SPORT ) Contract #: FA9550-10-1-0363 Reporting Period: 1 July 2010 – 31 December

PCB-Based Break-Out Box

Science.gov (United States)

Lee, Jason H.

2011-01-01

Break-out boxes (BOBs) are necessary for all electrical integration/cable checkouts and troubleshooting. Because the price of a BOB is high, and no work can be done without one, often the procedure stops, simply waiting for a BOB. A less expensive BOB would take less time in the integration, testing, and troubleshooting process. The PCB-based BOB works and looks the same as a standard JPL BOB, called Gold Boxes. The only differences between the old BOB and the new PCB-based BOB is that the new one has 80 percent of its circuitry in a printed circuit board. This process reduces the time for fabrication, thus making the BOBs less expensive. Moreover, because of its unique design, the new BOBs can be easily assembled and fixed. About 80 percent of the new PCB-based BOB is in a $22 (at the time of this reporting) custom-designed, yet commercially available PCB. This device has been used successfully to verify that BOB cables were properly made. Also, upon completion, the BOB was beeped out via a multimeter to ensure that all sockets on the connectors were properly connected to the respective banana jack. When compared to the Gold Box BOBs, the new BOB has many advantages. It is much more cost efficient, it delivers equal usability at substantially lower cost of the BOB, and the Gold Box is much heavier when compared to the new BOB. The new BOB is also a bit longer and much more versatile in that connectors are easily changeable and if a banana jack is broken, it can be replaced instead of throwing away an entire BOB.

Femtosecond optical injection of intact plant cells using a reconfigurable platform

Science.gov (United States)

Mitchell, Claire A.; Kalies, Stefan; Cizmar, Tomas; Bellini, Nicola; Kubasik-Thayil, Anisha; Heisterkamp, Alexander; Torrance, Lesley; Roberts, Alison G.; Gunn-Moore, Frank J.; Dholakia, Kishan

2014-03-01

The use of ultrashort-pulsed lasers for molecule delivery and transfection has proved to be a non-invasive and highly efficient technique for a wide range of mammalian cells. This present study investigates the effectiveness of femtosecond photoporation in plant cells, a hard-to-manipulate yet agriculturally relevant cell type, specifically suspension tobacco BY-2 cells. Both spatial and temporal shaping of the light field is employed to optimise the delivery of membrane impermeable molecules into plant cells using a reconfigurable optical system designed to be able to switch easily between different spatial modes and pulse durations. The use of a propagation invariant Bessel beam was found to increase the number of cells that could be viably optoinjected, when compared to the use of a Gaussian beam. Photoporation with a laser producing sub-12 fs pulses, coupled with a dispersion compensation system to retain the pulse duration at focus, reduced the power required for efficient optical injection by 1.5-1.8 times when compared to a photoporation with a 140 fs laser output.

PCB-induced changes of a benthic community and expected ecosystem recovery following in situ sorbent amendment

Science.gov (United States)

Janssen, Elisabeth M.-L.; Thompson, Janet K.; Luoma, Samuel N.; Luthy, Richard G.

2011-01-01

The benthic community was analyzed to evaluate pollution-induced changes for the polychlorinated biphenyl (PCB)-contaminated site at Hunters Point (HP) relative to 30 reference sites in San Francisco Bay, California, USA. An analysis based on functional traits of feeding, reproduction, and position in the sediment shows that HP is depauperate in deposit feeders, subsurface carnivores, and species with no protective barrier. Sediment chemistry analysis shows that PCBs are the major risk drivers at HP (1,570 ppb) and that the reference sites contain very low levels of PCB contamination (9 ppb). Different feeding traits support the existence of direct pathways of exposure, which can be mechanistically linked to PCB bioaccumulation by biodynamic modeling. The model shows that the deposit feeder Neanthes arenaceodentata accumulates approximately 20 times more PCBs in its lipids than the facultative deposit feeder Macoma balthica and up to 130 times more than the filter feeder Mytilus edulis. The comparison of different exposure scenarios suggests that PCB tissue concentrations at HP are two orders of magnitude higher than at the reference sites. At full scale, in situ sorbent amendment with activated carbon may reduce PCB bioaccumulation at HP by up to 85 to 90% under favorable field and treatment conditions. The modeling framework further demonstrates that such expected remedial success corresponds to exposure conditions suggested as the cleanup goal for HP. However, concentrations remain slightly higher than at the reference sites. The present study demonstrates how the remedial success of a sorbent amendment, which lowers the PCB availability, can be compared to reference conditions and traditional cleanup goals, which are commonly based on bulk sediment concentrations.

3D Reconfigurable NoC Multiprocessor Portable Sounder for Plasmaspheric Studies

Science.gov (United States)

Dekoulis, George

2016-07-01

The paper describes the development of a prototype imaging sounder for studying the irregularities of the ionospheric plasma. Cutting edge three-dimensional reconfigurable logic has been implemented allowing highly-intensive scientific calculations to be performed in hardware. The new parallel processing algorithms implemented offer a significant amount of performance improvement in the range of 80% compared to existing digital sounder implementations. The current system configuration is taking into consideration the modern scientific needs for portability during scientific campaigns. The prototype acts as a digital signal processing experimentation platform for future larger-scale digital sounder instrumentations for measuring complex planetary plasmaspheric environments.

Laboratory test of source encapsulation for decreasing PCB concentrations

DEFF Research Database (Denmark)

Kolarik, Barbara; Andersen, Helle Vibeke; Markowicz, Pawel

2016-01-01

This study investigates the effect of encapsulation of tertiary PCB sources with PERMASORB™ Adsorber Wallpaper and the surface emissions trap (cTrap) on indoor air concentration of PCBs and on the PCB content in the source. The 40 weeks long laboratory investigation shows reduction of the air...... concentration by approx. 90% for both wallpapers, a level comparable to source removal. The potential for extraction of PCBs from the contaminated materials stays unclear for both wallpapers. The cTrap has shown potential to accumulate PCBs, however the total content of PCB in investigated sources has...... apparently increased. The opposite was observed for the PERMASORB™, where the total PCB content in the sources has decreased, with however only small concentration of PCBs in the wallpaper measured at the end of the experiment....

The development for the particle physics experiments platform in university

International Nuclear Information System (INIS)

Liang Futian; Yao Yuan; Wang Zhaoqi; Liu Yuzhe; Sang Ziru; Chen Lian; Wen Fei; Jin Ge; Liu Hongbin

2012-01-01

Nuclear science and particle physics is an important subject in physics, and it is important to launch particle physics experiments in university to training students. We design an experiments platform based on particle physics experiments in university. By employing digitalization and reconfiguration techniques in our design, we achieve all kinds of device functions with only one device. With the customized software for particular experiments and a website for teaching assistance, the platform is easy to be employed in universities. Students can accomplish a classical particle physics experiment in a modern way with the help of the platform, and they can also try new ideals. The experiments platform is ready to be used, and some of the lab sessions in USTC have already begin to use our experiments platform. (authors)

Silicon photonic IC embedded optical-PCB for high-speed interconnect application

Science.gov (United States)

Kallega, Rakshitha; Nambiar, Siddharth; Kumar, Abhai; Ranganath, Praveen; Selvaraja, Shankar Kumar

2018-02-01

Optical-Printed Circuit Board (PCB) is an emerging optical interconnect technology to bridge the gap between the board edge and the processing module. The technology so far has been used as a broadband transmitter using polymer waveguides in the PCB. In this paper, we report a Silicon Nitride based photonic IC embedded in the PCB along with the polymers as waveguides in the PCB. The motivation for such integration is to bring routing capability and to reduce the power loss due to broadcasting mode.

Reference standards for quantitative trace analysis of PCB's by GC. Technical PCB formulations for the calibration of ECD and MSD responses

NARCIS (Netherlands)

Krupcik, J.; Kocan, A.; Petrik, J.; Leclercq, P.A.; Ballschmiter, K.

1993-01-01

The compn. of any tech. PCB formulation can be detd. directly by analyzing the PCB sample by gas chromatog. with a flame ionization detector (GC-FID), provided the relative mol. masses of the components are known. The responses of electron capture and selected-ion monitoring, mass-spectra detectors

A reconfigurable hybrid supervisory system for process control

International Nuclear Information System (INIS)

Garcia, H.E.; Ray, A.; Edwards, R.M.

1994-01-01

This paper presents a reconfigurable approach to decision and control systems for complex dynamic processes. The proposed supervisory control system is a reconfigurable hybrid architecture structured into three functional levels of hierarchy, namely, execution, supervision, and coordination. While the bottom execution level is constituted by either reconfigurable continuously varying or discrete event systems, the top two levels are necessarily governed by reconfigurable sets of discrete event decision and control systems. Based on the process status, the set of active control and supervisory algorithm is chosen. The reconfigurable hybrid system is briefly described along with a discussion on its implementation at the Experimental Breeder Reactor II of Argonne National Laboratory. A process control application of this hybrid system is presented and evaluated in an in-plant experiment

A reconfigurable hybrid supervisory system for process control

International Nuclear Information System (INIS)

Garcia, H.E.; Ray, A.; Edwards, R.M.

1994-01-01

This paper presents a reconfigurable approach to decision and control systems for complex dynamic processes. The proposed supervisory control system is a reconfigurable hybrid architecture structured into three functional levels of hierarchy, namely, execution, supervision, and coordination. While, the bottom execution level is constituted by either reconfigurable continuously varying or discrete event systems, the top two levels are necessarily governed by reconfigurable sets of discrete event decision and control systems. Based on the process status, the set of active control and supervisory algorithm is chosen. The reconfigurable hybrid system is briefly described along with a discussion on its implementation at the Experimental Breeder Reactor 2 of Argonne National Laboratory. A process control application of this hybrid system is presented and evaluated in an in-plant experiment

Sexual difference in PCB concentrations of lake trout (Salvelinus namaycush) from Lake Ontario

Science.gov (United States)

Madenjian, Charles P.; Keir, Michael J.; Whittle, D. Michael; Noguchi, George E.

2010-01-01

We determined polychlorinated biphenyl (PCB) concentrations in 61 female lake trout (Salvelinus namaycush) and 71 male lake trout from Lake Ontario (Ontario, Canada and New York, United States). To estimate the expected change in PCB concentration due to spawning, PCB concentrations in gonads and in somatic tissue of lake trout were also determined. In addition, bioenergetics modeling was applied to investigate whether gross growth efficiency (GGE) differed between the sexes. Results showed that, on average, males were 22% higher in PCB concentration than females in Lake Ontario. Results from the PCB determinations of the gonads and somatic tissues revealed that shedding of the gametes led to 3% and 14% increases in PCB concentration for males and females, respectively. Therefore, shedding of the gametes could not explain the higher PCB concentration in male lake trout. According to the bioenergetics modeling results, GGE of males was about 2% higher than adult female GGE, on average. Thus, bioenergetics modeling could not explain the higher PCB concentrations exhibited by the males. Nevertheless, a sexual difference in GGE remained a plausible explanation for the sexual difference in PCB concentrations of the lake trout.

Treatability of PCB-contaminated soils with quicklime (CaO)

International Nuclear Information System (INIS)

Mauro, D.; Taylor, B.B.

1992-12-01

The possibility that quicklime (calcium oxide, CaO) can destroy PCBs has received much attention over the past year. Observations at an EPA remediation site, where lime-containing kiln dusts were used for interim stabilization of PCB-containing wastes prompted the EPA to sponsor a small research project to investigate quicklime-PCB interactions. That study reported decreases in PCB content in synthetic, PCB-spiked soil following the application of quicklime and heat. META Environmental, Inc., as a contractor to EPRI, recently completed research designed to evaluate the effectiveness of quicklime for treating PCBs in soil and sand matrices under several reaction conditions, and to examine the underlying dechlorination chemistry involved, if any. Experiments were run with PCB-spiked sand and with actual PCB-contaminated soil. A variety of experimental conditions were employed including tests in open and closed containers, at ambient and elevated temperatures, and over a range of one hour to four days. Granular quicklime, fly ash, and kiln dust were all tested for reaction with PCBs. Early experiments showed that a mixture of sand/quicklime/water at 1:3:1.5 by weight, placed in an insulated container reached a maximum temperature of 216 degree C. Treatability experiments were subsequently run under controlled heat at room temperature, at 80 degree C, and at 200 degree C (following the initial temperature increase which occurs when water is added to quicklime). Little or no loss of PCBs was observed in open or closed containers at ambient or at 800 degree C over any period of time studied. A significant decrease of PCBs levels was observed only in the high temperature experiments (above 200 degree C), however the fate of the PCBs in those experiments was not determined. The conditions and the results of the PCB treatment tests are presented in this report, as well as recommendations for further studies

Acute alteration of cardiac ECG, action potential, I{sub Kr} and the human ether-a-go-go-related gene (hERG) K{sup +} channel by PCB 126 and PCB 77

Energy Technology Data Exchange (ETDEWEB)

Park, Mi-Hyeong; Park, Won Sun; Jo, Su-Hyun, E-mail: suhyunjo@kangwon.ac.kr

2012-07-01

Polychlorinated biphenyls (PCBs) have been known as serious persistent organic pollutants (POPs), causing developmental delays and motor dysfunction. We have investigated the effects of two PCB congeners, 3,3′,4,4′-tetrachlorobiphenyl (PCB 77) and 3,3′,4,4′,5-pentachlorobiphenyl (PCB 126) on ECG, action potential, and the rapidly activating delayed rectifier K{sup +} current (I{sub Kr}) of guinea pigs' hearts, and hERG K{sup +} current expressed in Xenopus oocytes. PCB 126 shortened the corrected QT interval (QTc) of ECG and decreased the action potential duration at 90% (APD{sub 90}), and 50% of repolarization (APD{sub 50}) (P < 0.05) without changing the action potential duration at 20% (APD{sub 20}). PCB 77 decreased APD{sub 20} (P < 0.05) without affecting QTc, APD{sub 90}, and APD{sub 50}. The PCB 126 increased the I{sub Kr} in guinea-pig ventricular myocytes held at 36 °C and hERG K{sup +} current amplitude at the end of the voltage steps in voltage-dependent mode (P < 0.05); however, PCB 77 did not change the hERG K{sup +} current amplitude. The PCB 77 increased the diastolic Ca{sup 2+} and decreased Ca{sup 2+} transient amplitude (P < 0.05), however PCB 126 did not change. The results suggest that PCB 126 shortened the QTc and decreased the APD{sub 90} possibly by increasing I{sub Kr}, while PCB 77 decreased the APD{sub 20} possibly by other modulation related with intracellular Ca{sup 2+}. The present data indicate that the environmental toxicants, PCBs, can acutely affect cardiac electrophysiology including ECG, action potential, intracellular Ca{sup 2+}, and channel activity, resulting in toxic effects on the cardiac function in view of the possible accumulation of the PCBs in human body. -- Highlights: ► PCBs are known as serious environmental pollutants and developmental disruptors. ► PCB 126 shortened QT interval of ECG and action potential duration. ► PCB 126 increased human ether-a-go-go-related K{sup +} current and I{sub Kr}. �

PCB exposure and cochlear function at age 6 years.

Science.gov (United States)

Palkovičová Murínová, Ľubica; Moleti, Arturo; Sisto, Renata; Wimmerová, Soňa; Jusko, Todd A; Tihányi, Juraj; Jurečková, Dana; Kováč, Ján; Koštiaková, Vladimíra; Drobná, Beata; Trnovec, Tomáš

2016-11-01

Epidemiological studies have documented adverse associations between exposure to polychlorinated biphenyls (PCBs) and otological outcomes. Previously, we documented decreased distortion product otoacoustic emission (DPOAE) levels in children exposed to PCBs, up to the age of 45 months, amongst a cohort of children in eastern Slovakia. The objective of the present study is to evaluate cochlear dysfunction at 72 months of age in 214 children from this same cohort and to compare the otoacoustic test sensitivity to that of pure tone audiometry (PTA). The association between DPOAE, PTA, and PCBs was estimated by means of multivariate ANOVA (MANOVA) and linear regression models. ROC curves were computed to estimate the DPOAE-test power in children. The DPOAE level at 72 months was related to PCB-153 serum levels. The DPOAE Input/Output function test at mid-frequency (2kHz) has shown instead nonmonotonic dependence on PCB exposure, for the left ears of children, over the whole growth curve. No significant association was found between PTA hearing levels and PCB-153 concentration. High diagnostic power of the DPOAE-test was found in children, similar to that found by the same authors in adults. In conclusions the DPOAE-PCB correlation obtained at 72 months is similar to that at 45 months suggesting a permanent and stable ototoxic effect of the PCB exposure. The lack of statistical significance of the PCB-PTA correlation suggests that DPOAEs are sensitive biomarkers of cochlear damage. Copyright © 2016 Elsevier Inc. All rights reserved.

Chamber study of PCB emissions from caulking materials and light ballasts.

Science.gov (United States)

Liu, Xiaoyu; Guo, Zhishi; Krebs, Kenneth A; Stinson, Rayford A; Nardin, Joshua A; Pope, Robert H; Roache, Nancy F

2015-10-01

The emissions of polychlorinated biphenyl (PCB) congeners from thirteen caulk samples were tested in a micro-chamber system. Twelve samples were from PCB-contaminated buildings and one was prepared in the laboratory. Nineteen light ballasts collected from buildings that represent 13 different models from five manufacturers were tested in 53-L environmental chambers. The rates of PCB congener emissions from caulking materials and light ballasts were determined. Several factors that may have affected the emission rates were evaluated. The experimentally determined emission factors showed that, for a given PCB congener, there is a linear correlation between the emission factor and the concentration of the PCB congener in the source. Furthermore, the test results showed that an excellent log-linear correlation exists between the normalized emission factor and the vapor pressure (coefficient of determination, r(2)⩾0.8846). The PCB congener emissions from ballasts at or near room temperature were relatively low with or without electrical load. However, the PCB congener emission rates increased significantly as the temperature increased. The results of this research provide new data and models for ranking the primary sources of PCBs and supports the development and refinement of exposure assessment models for PCBs. Published by Elsevier Ltd.

PCB dechlorination hotspots and reductive dehalogenase genes in sediments from a contaminated wastewater lagoon.

Science.gov (United States)

Mattes, Timothy E; Ewald, Jessica M; Liang, Yi; Martinez, Andres; Awad, Andrew; Richards, Patrick; Hornbuckle, Keri C; Schnoor, Jerald L

2017-08-12

Polychlorinated biphenyls (PCBs) are a class of persistent organic pollutants that are distributed worldwide. Although industrial PCB production has stopped, legacy contamination can be traced to several different commercial mixtures (e.g., Aroclors in the USA). Despite their persistence, PCBs are subject to naturally occurring biodegradation processes, although the microbes and enzymes involved are poorly understood. The biodegradation potential of PCB-contaminated sediments in a wastewater lagoon located in Virginia (USA) was studied. Total PCB concentrations in sediments ranged from 6.34 to 12,700 mg/kg. PCB congener profiles in sediment sample were similar to Aroclor 1248; however, PCB congener profiles at several locations showed evidence of dechlorination. The sediment microbial community structure varied among samples but was dominated by Proteobacteria and Firmicutes. The relative abundance of putative dechlorinating Chloroflexi (including Dehalococcoides sp.) was 0.01-0.19% among the sediment samples, with Dehalococcoides sp. representing 0.6-14.8% of this group. Other possible PCB dechlorinators present included the Clostridia and the Geobacteraceae. A PCR survey for potential PCB reductive dehalogenase genes (RDases) yielded 11 sequences related to RDase genes in PCB-respiring Dehalococcoides mccartyi strain CG5 and PCB-dechlorinating D. mccartyi strain CBDB1. This is the first study to retrieve potential PCB RDase genes from unenriched PCB-contaminated sediments.

A Reconfigurable and Biologically Inspired Paradigm for Computation Using Network-On-Chip and Spiking Neural Networks

Directory of Open Access Journals (Sweden)

Jim Harkin

2009-01-01

Full Text Available FPGA devices have emerged as a popular platform for the rapid prototyping of biological Spiking Neural Networks (SNNs applications, offering the key requirement of reconfigurability. However, FPGAs do not efficiently realise the biologically plausible neuron and synaptic models of SNNs, and current FPGA routing structures cannot accommodate the high levels of interneuron connectivity inherent in complex SNNs. This paper highlights and discusses the current challenges of implementing scalable SNNs on reconfigurable FPGAs. The paper proposes a novel field programmable neural network architecture (EMBRACE, incorporating low-power analogue spiking neurons, interconnected using a Network-on-Chip architecture. Results on the evaluation of the EMBRACE architecture using the XOR benchmark problem are presented, and the performance of the architecture is discussed. The paper also discusses the adaptability of the EMBRACE architecture in supporting fault tolerant computing.

Reconfiguring Urban Sustainability Transitions, Analysing Multiplicity

Directory of Open Access Journals (Sweden)

Mike Hodson

2017-02-01

Full Text Available Cities, and the networked infrastructures that sustain urban life, are seen as crucial sites for creating more sustainable futures. Yet, although there are many plans, the realisation of sustainable urban infrastructures on the ground is uneven. To develop better ways of understanding why this is the case, the paper makes a conceptual contribution by engaging with current understanding of urban sustainability transitions, using urban sustainable mobility as a reference point. It extends these insights to argue that urban transitions are not about technological or social innovation per se, but about how multiple innovations are experimented with, combined and reconfigured in existing urban contexts and how such processes are governed. There are potentially many ways in which urban sustainable mobility can be reconfigured contextually. Innovation is in the particular form of reconfiguration rather than individual technologies. To make analytical sense of this multiplicity, a preliminary framework is developed that offers the potential to think about urban transitions as contextual and reconfigurational. We argue that there is a need to embrace multiplicity and to understand its relationships to forms of reconfiguration, through empirical exploration and further theoretical and conceptual development. The preliminary framework is a contribution to doing so and we set out future directions for research.

An assessment of PCB degradation by microogransims including methods for measuring mineralization

International Nuclear Information System (INIS)

Hadden, C.; Edenborn, H.; Osborne, T.; Holdsworth, G.; Revis, N.

1990-01-01

These studies sought to isolate and identify organism(s) from PCB contaminated soil and sediment that degrade PCB; to provide information on the potential of organisms in soil samples taken from a PCB-contaminated area to mineralize or dechlorinate PCB congeners; to assess potential enhancement of PCB biodegradation as a result of nutritional amendment of the samples; and to carry out analyses of successive lysimeter samples to determine whether field treatments have had an effect on the capacity of soil microbes to mineralize PCBS. We have expended considerable effort to validate the fractionation procedure used to assess mineralization and conversion of PCB substrates. The assessment relies on the ability to measure [ 14 C]-labeled CO 2 in the presence of potentially volatile [ 14 C]-labeled PCB and degradation products to differentiate between volatile and non-volatile [ 14 C]-labeled compounds between water-soluble products of metabolism and a mixture of unchanged substrate and other water-insoluble products and between metabolism and loss or non-extractability of the substrate

An assessment of PCB degradation by microogransims including methods for measuring mineralization

Energy Technology Data Exchange (ETDEWEB)

Hadden, C.; Edenborn, H.; Osborne, T.; Holdsworth, G.; Revis, N.

1990-12-31

These studies sought to isolate and identify organism(s) from PCB contaminated soil and sediment that degrade PCB; to provide information on the potential of organisms in soil samples taken from a PCB-contaminated area to mineralize or dechlorinate PCB congeners; to assess potential enhancement of PCB biodegradation as a result of nutritional amendment of the samples; and to carry out analyses of successive lysimeter samples to determine whether field treatments have had an effect on the capacity of soil microbes to mineralize PCBS. We have expended considerable effort to validate the fractionation procedure used to assess mineralization and conversion of PCB substrates. The assessment relies on the ability to measure [{sup 14}C]-labeled CO{sub 2} in the presence of potentially volatile [{sup 14}C]-labeled PCB and degradation products to differentiate between volatile and non-volatile [{sup 14}C]-labeled compounds between water-soluble products of metabolism and a mixture of unchanged substrate and other water-insoluble products and between metabolism and loss or non-extractability of the substrate.

Microbial community analysis of switchgrass planted and unplanted soil microcosms displaying PCB dechlorination.

Science.gov (United States)

Liang, Yi; Meggo, Richard; Hu, Dingfei; Schnoor, Jerald L; Mattes, Timothy E

2015-08-01

Polychlorinated biphenyls (PCBs) pose potential risks to human and environmental health because they are carcinogenic, persistent, and bioaccumulative. In this study, we investigated bacterial communities in soil microcosms spiked with PCB 52, 77, and 153. Switchgrass (Panicum virgatum) was employed to improve overall PCB removal, and redox cycling (i.e., sequential periods of flooding followed by periods of no flooding) was performed in an effort to promote PCB dechlorination. Lesser chlorinated PCB transformation products were detected in all microcosms, indicating the occurrence of PCB dechlorination. Terminal restriction fragment length polymorphism (T-RFLP) and clone library analysis showed that PCB spiking, switchgrass planting, and redox cycling affected the microbial community structure. Putative organohalide-respiring Chloroflexi populations, which were not found in unflooded microcosms, were enriched after 2 weeks of flooding in the redox-cycled microcosms. Sequences classified as Geobacter sp. were detected in all microcosms and were most abundant in the switchgrass-planted microcosm spiked with PCB congeners. The presence of possible organohalide-respiring bacteria in these soil microcosms suggests that they play a role in PCB dechlorination therein.

Distribution grid reconfiguration reduces power losses and helps integrate renewables

International Nuclear Information System (INIS)

Lueken, Colleen; Carvalho, Pedro M.S.; Apt, Jay

2012-01-01

A reconfigurable network can change its topology by opening and closing switches on power lines. We use real wind, solar, load, and cost data and a model of a reconfigurable distribution grid to show that reconfiguration allows a grid operator to reduce operational losses as well as to accept more intermittent renewable generation than a static configuration can. Net present value analysis of automated switch technology shows that the return on investment is negative for this test network when considering only loss reduction, but that the investment is attractive under certain conditions when reconfiguration is used to minimize curtailment. - Highlights: ► Reconfiguration may reduce losses in grids with solar or wind distributed generation. ► Reconfigurable networks can accept more solar or wind DG than static ones. ► Using reconfiguration for loss reduction would not create a positive ROI. ► Using reconfiguration to reduce curtailment usually would create a positive ROI.

Embedded Linux platform for data acquisition systems

International Nuclear Information System (INIS)

Patel, Jigneshkumar J.; Reddy, Nagaraj; Kumari, Praveena; Rajpal, Rachana; Pujara, Harshad; Jha, R.; Kalappurakkal, Praveen

2014-01-01

Highlights: • The design and the development of data acquisition system on FPGA based reconfigurable hardware platform. • Embedded Linux configuration and compilation for FPGA based systems. • Hardware logic IP core and its Linux device driver development for the external peripheral to interface it with the FPGA based system. - Abstract: This scalable hardware–software system is designed and developed to explore the emerging open standards for data acquisition requirement of Tokamak experiments. To address the future need for a scalable data acquisition and control system for fusion experiments, we have explored the capability of software platform using Open Source Embedded Linux Operating System on a programmable hardware platform such as FPGA. The idea was to identify the platform which can be customizable, flexible and scalable to support the data acquisition system requirements. To do this, we have selected FPGA based reconfigurable and scalable hardware platform to design the system with Embedded Linux based operating system for flexibility in software development and Gigabit Ethernet interface for high speed data transactions. The proposed hardware–software platform using FPGA and Embedded Linux OS offers a single chip solution with processor, peripherals such ADC interface controller, Gigabit Ethernet controller, memory controller amongst other peripherals. The Embedded Linux platform for data acquisition is implemented and tested on a Virtex-5 FXT FPGA ML507 which has PowerPC 440 (PPC440) [2] hard block on FPGA. For this work, we have used the Linux Kernel version 2.6.34 with BSP support for the ML507 platform. It is downloaded from the Xilinx [1] GIT server. Cross-compiler tool chain is created using the Buildroot scripts. The Linux Kernel and Root File System are configured and compiled using the cross-tools to support the hardware platform. The Analog to Digital Converter (ADC) IO module is designed and interfaced with the ML507 through Xilinx

Embedded Linux platform for data acquisition systems

Energy Technology Data Exchange (ETDEWEB)

Patel, Jigneshkumar J., E-mail: jjp@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Reddy, Nagaraj, E-mail: nagaraj.reddy@coreel.com [Sandeepani School of Embedded System Design, Bangalore, Karnataka (India); Kumari, Praveena, E-mail: praveena@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Rajpal, Rachana, E-mail: rachana@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Pujara, Harshad, E-mail: pujara@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Jha, R., E-mail: rjha@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Kalappurakkal, Praveen, E-mail: praveen.k@coreel.com [Sandeepani School of Embedded System Design, Bangalore, Karnataka (India)

2014-05-15

Highlights: • The design and the development of data acquisition system on FPGA based reconfigurable hardware platform. • Embedded Linux configuration and compilation for FPGA based systems. • Hardware logic IP core and its Linux device driver development for the external peripheral to interface it with the FPGA based system. - Abstract: This scalable hardware–software system is designed and developed to explore the emerging open standards for data acquisition requirement of Tokamak experiments. To address the future need for a scalable data acquisition and control system for fusion experiments, we have explored the capability of software platform using Open Source Embedded Linux Operating System on a programmable hardware platform such as FPGA. The idea was to identify the platform which can be customizable, flexible and scalable to support the data acquisition system requirements. To do this, we have selected FPGA based reconfigurable and scalable hardware platform to design the system with Embedded Linux based operating system for flexibility in software development and Gigabit Ethernet interface for high speed data transactions. The proposed hardware–software platform using FPGA and Embedded Linux OS offers a single chip solution with processor, peripherals such ADC interface controller, Gigabit Ethernet controller, memory controller amongst other peripherals. The Embedded Linux platform for data acquisition is implemented and tested on a Virtex-5 FXT FPGA ML507 which has PowerPC 440 (PPC440) [2] hard block on FPGA. For this work, we have used the Linux Kernel version 2.6.34 with BSP support for the ML507 platform. It is downloaded from the Xilinx [1] GIT server. Cross-compiler tool chain is created using the Buildroot scripts. The Linux Kernel and Root File System are configured and compiled using the cross-tools to support the hardware platform. The Analog to Digital Converter (ADC) IO module is designed and interfaced with the ML507 through Xilinx

γIrradiation induced formation of PCB-solvent adducts in aliphatic solvents

International Nuclear Information System (INIS)

Lepine, F.; Milot, S.; Gagne, N.

1990-01-01

γIrradiation induced formation of PCB-solvent adducts was investigated as a model for PCB residues in irradiated food. Formation of cyclohexyl adducts of PCBs was found to be significant when pure PCB congeners and Aroclor mixture were irradiated in cyclohexane and cyclohexene. Reaction pathways were investigated, and the effects of oxygen and electron scavenger were studied

Metasurfaces Based on Phase-Change Material as a Reconfigurable Platform for Multifunctional Devices

Science.gov (United States)

Raeis-Hosseini, Niloufar; Rho, Junsuk

2017-01-01

Integration of phase-change materials (PCMs) into electrical/optical circuits has initiated extensive innovation for applications of metamaterials (MMs) including rewritable optical data storage, metasurfaces, and optoelectronic devices. PCMs have been studied deeply due to their reversible phase transition, high endurance, switching speed, and data retention. Germanium-antimony-tellurium (GST) is a PCM that has amorphous and crystalline phases with distinct properties, is bistable and nonvolatile, and undergoes a reliable and reproducible phase transition in response to an optical or electrical stimulus; GST may therefore have applications in tunable photonic devices and optoelectronic circuits. In this progress article, we outline recent studies of GST and discuss its advantages and possible applications in reconfigurable metadevices. We also discuss outlooks for integration of GST in active nanophotonic metadevices. PMID:28878196

Monitoring OH-PCBs in PCB transport worker's urine as a non-invasive exposure assessment tool.

Science.gov (United States)

Haga, Yuki; Suzuki, Motoharu; Matsumura, Chisato; Okuno, Toshihiro; Tsurukawa, Masahiro; Fujimori, Kazuo; Kannan, Narayanan; Weber, Roland; Nakano, Takeshi

2018-04-14

In this study, we analyzed hydroxylated polychlorinated biphenyls (OH-PCBs) in urine of both PCB transport workers and PCB researchers. A method to monitor OH-PCB in urine was developed. Urine was solid-phase extracted with 0.1% ammonia/ methanol (v/v) and glucuronic acid/sulfate conjugates and then decomposed using β-glucuronidase/arylsulfatase. After alkaline digestion/derivatization, the concentration of OH-PCBs was determined by HRGC/HRMS-SIM. In the first sampling campaign, the worker's OH-PCB levels increased several fold after the PCB waste transportation work, indicating exposure to PCBs. The concentration of OH-PCBs in PCB transport workers' urine (0.55~11 μg/g creatinine (Cre)) was higher than in PCB researchers' urine (PCB storage area. In the second sampling, after recommended PCB exposure reduction measures had been enacted, the worker's PCB levels did not increase during handling of PCB equipment. This suggests that applied safety measures improved the situation. Hydroxylated trichlorobiphenyls (OH-TrCBs) were identified as a major homolog of OH-PCBs in urine. Also, hydroxylated tetrachlorobiphenyls (OH-TeCBs) to hydroxylated hexachlorobiphenyls (OH-HxCBs) were detected. For the sum of ten selected major indicators, a strong correlation to total OH-PCBs were found and these can possibly be used as non-invasive biomarkers of PCB exposure in workers managing PCB capacitors and transformer oils. We suggest that monitoring of OH-PCBs in PCB management projects could be considered a non-invasive way to detect exposure. It could also be used as a tool to assess and improve PCB management. This is highly relevant considering the fact that in the next 10 years, approx. 14 million tons of PCB waste need to be managed. Also, the selected populations could be screened to assess whether exposure at work, school, or home has taken place.

Design, Modelling and Analysis of a Workflow Reconfiguration

DEFF Research Database (Denmark)

Mazzara, Manuel; Abouzaid, Faisal; Dragoni, Nicola

2011-01-01

This paper describes a case study involving the reconfiguration of an office workflow. We state the requirements on a system implementing the workflow and its reconfiguration, and describe the system’s design in BPMN. We then use an asynchronous pi-calculus and Web.1 to model the design and to ve......This paper describes a case study involving the reconfiguration of an office workflow. We state the requirements on a system implementing the workflow and its reconfiguration, and describe the system’s design in BPMN. We then use an asynchronous pi-calculus and Web.1 to model the design...

Reconfiguring trade mark law

DEFF Research Database (Denmark)

Elsmore, Matthew James

2013-01-01

-border setting, with a particular focus on small business and consumers. The article's overall message is to call for a rethink of received wisdom suggesting that trade marks are effective trade-enabling devices. The case is made for reassessing how we think about European trade mark law.......First, this article argues that trade mark law should be approached in a supplementary way, called reconfiguration. Second, the article investigates such a reconfiguration of trade mark law by exploring the interplay of trade marks and service transactions in the Single Market, in the cross...

A modeling approach to compare ΣPCB concentrations between congener-specific analyses

Science.gov (United States)

Gibson, Polly P.; Mills, Marc A.; Kraus, Johanna M.; Walters, David M.

2017-01-01

Changes in analytical methods over time pose problems for assessing long-term trends in environmental contamination by polychlorinated biphenyls (PCBs). Congener-specific analyses vary widely in the number and identity of the 209 distinct PCB chemical configurations (congeners) that are quantified, leading to inconsistencies among summed PCB concentrations (ΣPCB) reported by different studies. Here we present a modeling approach using linear regression to compare ΣPCB concentrations derived from different congener-specific analyses measuring different co-eluting groups. The approach can be used to develop a specific conversion model between any two sets of congener-specific analytical data from similar samples (similar matrix and geographic origin). We demonstrate the method by developing a conversion model for an example data set that includes data from two different analytical methods, a low resolution method quantifying 119 congeners and a high resolution method quantifying all 209 congeners. We used the model to show that the 119-congener set captured most (93%) of the total PCB concentration (i.e., Σ209PCB) in sediment and biological samples. ΣPCB concentrations estimated using the model closely matched measured values (mean relative percent difference = 9.6). General applications of the modeling approach include (a) generating comparable ΣPCB concentrations for samples that were analyzed for different congener sets; and (b) estimating the proportional contribution of different congener sets to ΣPCB. This approach may be especially valuable for enabling comparison of long-term remediation monitoring results even as analytical methods change over time. 

Estrogenicity and androgenicity screening of PCB sulfate monoesters in human breast cancer MCF-7 cells

OpenAIRE

Flor, Susanne; He, Xianran; Lehmler, Hans-Joachim; Ludewig, Gabriele

2015-01-01

Recent studies identified PCB sulfate esters as a major product of PCB metabolism. Since hydroxy-PCBs (HO-PCBs), the immediate precursors of PCB sulfates and important contributors to PCB toxicity, were shown to have estrogenic activity, we investigated the estrogenicity/androgenicty of a series of PCB sulfate metabolites. We synthesized the five possible structural sulfate monoester metabolites of PCB 3, a congener shown to be biotransformed to sulfates, a sulfate ester of the paint-specific...

Studies on the distribution of 14C-labelled PCB in the body, 4

International Nuclear Information System (INIS)

Nagao, Soshichi; Hosoya, Hideo

1976-01-01

This paper is a report of 14 C-PCB distribution series in animals. We reported the results of the distribution of 14 C-PCB from birds, fish and shell in the previous experiments, and we have obtained some results from present experiment. This time interperito neal injection of 14 C-PCB solution was carried to mice, and the results were as follows; Excretion of 14 C-PCB as radioactivity was at its maximum about 6 hr. after medication. Excretive ratio was 87.20% for 24 hr, but 72.43% of radioactivity was excreted within 12hr. The result of radiopaperchromatography showed that 14 C-PCB was not changeable in the fecus after medication, being Rf = 0.92 in comparison with standard 14 C-PCB. 14 C-PCB distributed throughout the body of mice in 24 hr. and at least remained over till 480 hr. in adipose tissues of mice after single medication. (auth.)

Sexual difference in PCB concentrations of walleyes (Sander vitreus) from a pristine lake

Science.gov (United States)

Madenjian, C.P.; Hanchin, P.A.; Chernyak, S.M.; Begnoche, L.J.

2009-01-01

We determined polychlorinated biphenyl (PCB) concentrations in 15 adult female walleyes (Sander vitreus) and 15 adult male walleyes from South Manistique Lake (Michigan, United States), a relatively pristine lake with no point source inputs of PCBs. By measuring PCB concentration in gonads and in somatic tissue of the South Manistique Lake fish, we also estimated the expected change in PCB concentration due to spawning for both sexes. To determine whether gross growth efficiency differed between the sexes, we applied bioenergetics modeling. Results showed that, on average, adult males were 34% higher in PCB concentration than adult females in South Manistique Lake. Results from the PCB determinations of the gonads and somatic tissues revealed that shedding of the gametes led to 1% and 5% increases in PCB concentration for males and females, respectively. Therefore, shedding of the gametes could not explain the higher PCB concentration in adult male walleyes. Bioenergetics modeling results indicated that the sexual difference in PCB concentrations of South Manistique Lake walleyes was attributable, at least in part, to a sexual difference in gross growth efficiency (GGE). Adult female GGE was estimated to be up to 17% greater than adult male GGE.

77 FR 13603 - Anniston PCB Superfund Site; Anniston, Calhoun County, AL; Correction

Science.gov (United States)

2012-03-07

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9644-2; CERCLA-04-2012-3763] Anniston PCB Superfund Site... FR 11533 (FRL-9637-7), EPA posted a Notice of Amended Settlement concerning the Anniston PCB... the settlement are available from Ms. Paula V. Painter. Submit your comments by Site name Anniston PCB...

Optimization of metallic microheaters for high-speed reconfigurable silicon photonics.

Science.gov (United States)

Atabaki, A H; Shah Hosseini, E; Eftekhar, A A; Yegnanarayanan, S; Adibi, A

2010-08-16

The strong thermooptic effect in silicon enables low-power and low-loss reconfiguration of large-scale silicon photonics. Thermal reconfiguration through the integration of metallic microheaters has been one of the more widely used reconfiguration techniques in silicon photonics. In this paper, structural and material optimizations are carried out through heat transport modeling to improve the reconfiguration speed of such devices, and the results are experimentally verified. Around 4 micros reconfiguration time are shown for the optimized structures. Moreover, sub-microsecond reconfiguration time is experimentally demonstrated through the pulsed excitation of the microheaters. The limitation of this pulsed excitation scheme is also discussed through an accurate system-level model developed for the microheater response.

Chemical and microbiological characterization of an aged PCB-contaminated soil.

Science.gov (United States)

Stella, T; Covino, S; Burianová, E; Filipová, A; Křesinová, Z; Voříšková, J; Větrovský, T; Baldrian, P; Cajthaml, T

2015-11-15

This study was aimed at complex characterization of three soil samples (bulk soil, topsoil and rhizosphere soil) from a site historically contaminated with polychlorinated biphenyls (PCB). The bulk soil was the most highly contaminated, with a PCB concentration of 705.95 mg kg(-1), while the rhizosphere soil was the least contaminated (169.36 mg kg(-1)). PCB degradation intermediates, namely chlorobenzoic acids (CBAs), were detected in all the soil samples, suggesting the occurrence of microbial transformation processes over time. The higher content of organic carbon in the topsoil and rhizosphere soil than in the bulk soil could be linked to the reduced bioaccessibility (bioavailability) of these chlorinated pollutants. However, different proportions of the PCB congener contents and different bioaccessibility of the PCB homologues indicate microbial biotransformation of the compounds. The higher content of organic carbon probably also promoted the growth of microorganisms, as revealed by phospholipid fatty acid (PFLA) quantification. Tag-encoded pyrosequencing analysis showed that the bacterial community structure was significantly similar among the three soils and was predominated by Proteobacteria (44-48%) in all cases. Moreover, analysis at lower taxonomic levels pointed to the presence of genera (Sphingomonas, Bulkholderia, Arthrobacter, Bacillus) including members with reported PCB removal abilities. The fungal community was mostly represented by Basidiomycota and Ascomycota, which accounted for >80% of all the sequences detected in the three soils. Fungal taxa with biodegradation potential (Paxillus, Cryptococcus, Phoma, Mortierella) were also found. These results highlight the potential of the indigenous consortia present at the site as a starting point for PCB bioremediation processes. Copyright © 2015 Elsevier B.V. All rights reserved.

Novel reconfigurable wide-beam radio interferometer for space physics instrumentation

Science.gov (United States)

Dekoulis, George; Honary, Farideh

2008-07-01

This paper describes the instrumentation design of a novel wide-beam interferometer system for radio astronomy studies. The system measures the Earth's or another planet's atmospheric layers attenuation of the highly energetic galactic electron emissions superimposed on the Cosmic Microwave Background (CMB) and other last scattering surface galactic and extragalactic radio astronomical background emissions. Right ascension coordinates are surveyed in a unique manner in terms of digital signal processing flexibility, compared to existing wide-beam instrumentations, allowing higher resolution analysis of the captured Space Physics events. The system provides a prototyping platform for other Space Physics projects, since a modular software and hardware design approach has been followed. The system is reconfigurable to meet a variety of testing scenarios.

New EPA ban stymies Canadian exports of PCB waste

International Nuclear Information System (INIS)

Anon.

1997-01-01

With reference to a 1996 EPA ruling permitting the importation to the USA of PCBs for incineration, a unanimous three-judge panel of the US Court of Appeals for the Ninth District in San Francisco ruled that the Environmental Protection Agency (EPA) did not have the authority to permit the import of PCB wastes into the USA for disposal. Prior to the decision, 35 applications from Canada to export some 37,000 tonnes of PCB to the USA for disposal have been approved. Canadian brokers are upset with the decision, claiming that the decision will create a virtual monopoly for Bovar Inc., of Calgary, the only PCB-disposal facility in Canada. The loss (at least for the time being) of the alternate disposal opportunity will likely have the effect of forcing Canadian customers to pay more for PCB disposal. The Canadian government is monitoring the situation and is waiting to see whether an appeal is filed against the ruling

Active vibration control of a full scale aircraft wing using a reconfigurable controller

Science.gov (United States)

Prakash, Shashikala; Renjith Kumar, T. G.; Raja, S.; Dwarakanathan, D.; Subramani, H.; Karthikeyan, C.

2016-01-01

This work highlights the design of a Reconfigurable Active Vibration Control (AVC) System for aircraft structures using adaptive techniques. The AVC system with a multichannel capability is realized using Filtered-X Least Mean Square algorithm (FxLMS) on Xilinx Virtex-4 Field Programmable Gate Array (FPGA) platform in Very High Speed Integrated Circuits Hardware Description Language, (VHDL). The HDL design is made based on Finite State Machine (FSM) model with Floating point Intellectual Property (IP) cores for arithmetic operations. The use of FPGA facilitates to modify the system parameters even during runtime depending on the changes in user's requirements. The locations of the control actuators are optimized based on dynamic modal strain approach using genetic algorithm (GA). The developed system has been successfully deployed for the AVC testing of the full-scale wing of an all composite two seater transport aircraft. Several closed loop configurations like single channel and multi-channel control have been tested. The experimental results from the studies presented here are very encouraging. They demonstrate the usefulness of the system's reconfigurability for real time applications.

PCB usage at the Grand Junction Area Office Facility. Final report

International Nuclear Information System (INIS)

Miller, M.E.; Donivan, S.

1982-06-01

The development, implementation, and results of the polychlorinated biphenyl (PCB) identification project at the Grand Junction Area Office (GJAO) are summarized. Methodology for the PCB analysis is described, and results are tabulated. Of the 51 transformers and disconnects in use at GJAO, 15 unites were determined to be PCB-contaminated or filled with PCBs. This number falls within EPA's estimate of 25 to 40 percent of all transformers in use being at least contaminated. Approximately 324 gallons of PCBs and 515 gallons of PCB-contaminated fluids are being used currently. No contaminated transformers or disconnects are in a position to contaminate food or feed products at the facility

New technologies for PCB [polychlorinated biphenyl] decontamination

International Nuclear Information System (INIS)

Webber, I.

1993-01-01

Polychlorinated biphenyls (PCB) were mixed with chlorobenzenes to reduce viscosity and provide for both electrical insulation and convective heat transfers. These mixtures were known as askarels, and ca 99.8% of PCBs used in electrical applications are contained in askarel-filled transformers and capacitors. It is estimated that there are ca 180 million gal of PCB-contaminated oil distributed through over 3 million transformers in the USA. Technology used for decontaminating these transformers depends on the concentration of the PCB contamination. At low PCB concentrations of up to ca 2,000 ppM, chemical methods can be used; at higher concentrations, alternative disposal options become more attractive. For chemical treatment, a small mobile unit using quick-reacting reagents has been developed for on-site decontamination. For highly contaminated transformers, retrofilling is very attractive since the owner's liability is minimized at minimum cost. Conventional flush/drain procedures have such drawbacks as the inability to remove oil trapped in windings and the leaching of trapped PCBs back into the uncontaminated retrofill oil over time. A new process has been developed to solve the leaching problem and to decontaminate the drained askarel at room temperature using a catalyst. An alternative disposal strategy involves dismantling the transformer carcass, incinerating non-recyclable materials, and cleaning the metals and wire with solvent. 8 figs

40 CFR 261.8 - PCB wastes regulated under Toxic Substance Control Act.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false PCB wastes regulated under Toxic... (CONTINUED) SOLID WASTES (CONTINUED) IDENTIFICATION AND LISTING OF HAZARDOUS WASTE General § 261.8 PCB wastes regulated under Toxic Substance Control Act. The disposal of PCB-containing dielectric fluid and electric...

Radiation dechlorination of PCE and PCB in the quarter operation flow apparatus

International Nuclear Information System (INIS)

Mucka, V.; Silber, R.; Pospisil, M.; Camra, M.; Bartonicek, B.

1999-01-01

The aim of this work was to verify practical possibilities of radiation dechlorination of liquid chlorinated substrates [perchloroethylene (PCE) and polychlorinated biphenyls (PCB)] in the quarter operation flow apparatus. In this apparatus may be disposable work over 50 dm 3 of media. Radiation dechlorination of PCE proceeds more effectively as dechlorination of PCB in flow regimes, too. Radiation chemical yield of G(-OH - ) decrease with increasing applied radiation dose and at the dose 5 kGy for PCE it is 200 · 10 -2 eV -1 and for PCB this value is 55 · 10 -2 eV -1 . At increasing original concentration of PCE or PCB the G-values decreases. The radical chain mechanism of dechlorination of PCE and PCB was proposed

Secure computing on reconfigurable systems

OpenAIRE

Fernandes Chaves, R.J.

2007-01-01

This thesis proposes a Secure Computing Module (SCM) for reconfigurable computing systems. SC provides a protected and reliable computational environment, where data security and protection against malicious attacks to the system is assured. SC is strongly based on encryption algorithms and on the attestation of the executed functions. The use of SC on reconfigurable devices has the advantage of being highly adaptable to the application and the user requirements, while providing high performa...

Reconfiguring Maternity Care?

DEFF Research Database (Denmark)

Johannsen, Nis

This dissertation constitutes a reflection on two initiatives seeking to reconfigure maternity care. One initiative sought to digitalise maternity records and included a pilot run of an electronic maternity record in a Danish county. The other consisted of a collaboration between a maternity ward...... at a hospital and a group of researchers which included me. Both initiatives involved numerous seemingly different interests that were held together and related to reconfiguring maternity care. None of the initiatives can unequivocally be labelled a success, as neither managed to change maternity care, at least...... experimental designs are constructed. The consequences and the politics of the proposed changes are engaged with in laboratory manner through collaborative development of the designs and through exposing them to members of field of maternity care...

Value co-creation platform design within the context of technology-driven businesses

Science.gov (United States)

Tanev, Stoyan; Ruskov, Petko

2010-02-01

The article provides a discussion of value co-creation platforms within the context of technology driven business. It emphasizes the need for a terminological refinement of the value co-creation paradigm as well as for an articulation of its implications for the design and reconfiguration of the company value network.

Research and development of common DAQ platform

International Nuclear Information System (INIS)

Higuchi, T.; Igarashi, Y.; Nakao, M.; Suzuki, S.Y.; Tanaka, M.; Nagasaka, Y.; Varner, G.

2003-01-01

The upgrade of the KEKB accelerator toward L=10 35 cm -2 s -1 requires an upgrade of the Belle data acquisition system. To match the market trend, we develop a DAQ platform based on the PCI bus that enables fastest DAQ with longer lifetime of the system. The platform is a VME-9U motherboard comprising of four slots for signal digitization modules and three PMC slots to house CPU for data compression. The platform is equipped with event FIFOs for data buffering to minimize the dead-time. A trigger module residing on VME-6U size rear board is connected to the 9U board via PCI-PCI bridge to make an interrupt for the CPU upon the level-1 trigger. (author)

A methodological approach for designing and sequencing product families in Reconfigurable Disassembly Systems

Directory of Open Access Journals (Sweden)

Ignacio Eguia

2011-10-01

Full Text Available Purpose: A Reconfigurable Disassembly System (RDS represents a new paradigm of automated disassembly system that uses reconfigurable manufacturing technology for fast adaptation to changes in the quantity and mix of products to disassemble. This paper deals with a methodology for designing and sequencing product families in RDS. Design/methodology/approach: The methodology is developed in a two-phase approach, where products are first grouped into families and then families are sequenced through the RDS, computing the required machines and modules configuration for each family. Products are grouped into families based on their common features using a Hierarchical Clustering Algorithm. The optimal sequence of the product families is calculated using a Mixed-Integer Linear Programming model minimizing reconfigurability and operational costs. Findings: This paper is focused to enable reconfigurable manufacturing technologies to attain some degree of adaptability during disassembly automation design using modular machine tools. Research limitations/implications: The MILP model proposed for the second phase is similar to the well-known Travelling Salesman Problem (TSP and therefore its complexity grows exponentially with the number of products to disassemble. In real-world problems, which a higher number of products, it may be advisable to solve the model approximately with heuristics. Practical implications: The importance of industrial recycling and remanufacturing is growing due to increasing environmental and economic pressures. Disassembly is an important part of remanufacturing systems for reuse and recycling purposes. Automatic disassembly techniques have a growing number of applications in the area of electronics, aerospace, construction and industrial equipment. In this paper, a design and scheduling approach is proposed to apply in this area. Originality/value: This paper presents a new concept called Reconfigurable Disassembly System

Design of reconfigurable antennas using graph models

CERN Document Server

Costantine, Joseph; Christodoulou, Christos G; Christodoulou, Christos G

2013-01-01

This lecture discusses the use of graph models to represent reconfigurable antennas. The rise of antennas that adapt to their environment and change their operation based on the user's request hasn't been met with clear design guidelines. There is a need to propose some rules for the optimization of any reconfigurable antenna design and performance. Since reconfigurable antennas are seen as a collection of self-organizing parts, graph models can be introduced to relate each possible topology to a corresponding electromagnetic performance in terms of achieving a characteristic frequency of oper

Reconfigurable radio systems network architectures and standards

CERN Document Server

Iacobucci, Maria Stella

2013-01-01

This timely book provides a standards-based view of the development, evolution, techniques and potential future scenarios for the deployment of reconfigurable radio systems.  After an introduction to radiomobile and radio systems deployed in the access network, the book describes cognitive radio concepts and capabilities, which are the basis for reconfigurable radio systems.  The self-organizing network features introduced in 3GPP standards are discussed and IEEE 802.22, the first standard based on cognitive radio, is described. Then the ETSI reconfigurable radio systems functional ar

Relationships between Atmospheric Transport Regimes and PCB Concentrations in the Air at Zeppelin, Spitsbergen.

Science.gov (United States)

Ubl, Sandy; Scheringer, Martin; Hungerbühler, Konrad

2017-09-05

Polychlorinated biphenyls (PCBs) are persistent hazardous chemicals that are still detected in the atmosphere and other environmental media, although their production has been banned for several decades. At the long-term monitoring site, Zeppelin at Spitsbergen, different PCB congeners have been continuously measured for more than a decade. However, it is not clear what factors determine the seasonal and interannual variability of different (lighter versus heavier) PCB congeners. To investigate the influence of atmospheric transport patterns on PCB-28 and PCB-101 concentrations at Zeppelin, we applied the Lagrangian Particle Dispersion Model FLEXPART and calculated "footprints" that indicate the potential source regions of air arriving at Zeppelin. By means of a cluster analysis, we assigned groups of similar footprints to different transport regimes and analyzed the PCB concentrations according to the transport regimes. The concentrations of both PCB congeners are affected by the different transport regimes. For PCB-101, the origin of air masses from the European continent is primarily related to high concentrations; elevated PCB-101 concentrations in winter can be explained by the high frequency of this transport regime in winter, whereas PCB-101 concentrations are low when air is arriving from the oceans. For PCB-28, in contrast, concentrations are high during summer when air is mainly arriving from the oceans but low when air is arriving from the continents. The most likely explanation of this finding is that local emissions of PCB-28 mask the effect of long-range transport and determine the concentrations measured at Zeppelin.

Machine Vision Implementation in Rapid PCB Prototyping

Directory of Open Access Journals (Sweden)

Yosafat Surya Murijanto

2012-03-01

Full Text Available Image processing, the heart of machine vision, has proven itself to be an essential part of the industries today. Its application has opened new doorways, making more concepts in manufacturing processes viable. This paper presents an application of machine vision in designing a module with the ability to extract drills and route coordinates from an un-mounted or mounted printed circuit board (PCB. The algorithm comprises pre-capturing processes, image segmentation and filtering, edge and contour detection, coordinate extraction, and G-code creation. OpenCV libraries and Qt IDE are the main tools used. Throughout some testing and experiments, it is concluded that the algorithm is able to deliver acceptable results. The drilling and routing coordinate extraction algorithm can extract in average 90% and 82% of the whole drills and routes available on the scanned PCB in a total processing time of less than 3 seconds. This is achievable through proper lighting condition, good PCB surface condition and good webcam quality. 

Graphene-based Yagi-Uda antenna with reconfigurable radiation patterns

Energy Technology Data Exchange (ETDEWEB)

Wu, Yongle, E-mail: wuyongle138@gmail.com; Qu, Meijun; Jiao, Lingxiao; Liu, Yuanan [School of Electronic Engineering, Beijing Key Laboratory of Work Safety Intelligent Monitoring, Beijing University of Posts and Telecommunications, P. O. Box. 282, Beijing, 100876 (China); Ghassemlooy, Zabih [Optical Communications Research Group, NCRLab, Faculty of Engineering and Environment, Northumbria University, Newcastle upon Tyne, NE1 8ST (United Kingdom)

2016-06-15

This paper presents a radiation pattern reconfigurable Yagi-Uda antenna based on graphene operating at terahertz frequencies. The antenna can be reconfigured to change the main beam pattern into two or four different radiation directions. The proposed antenna consists of a driven dipole radiation conductor, parasitic strips and embedded graphene. The hybrid graphene-metal implementation enables the antenna to have dynamic surface conductivity, which can be tuned by changing the chemical potentials. Therefore, the main beam direction, the resonance frequency, and the front-to-back ratio of the proposed antenna can be controlled by tuning the chemical potentials of the graphene embedded in different positions. The proposed two-beam reconfigurable Yagi-Uda antenna can achieve excellent unidirectional symmetrical radiation pattern with the front-to-back ratio of 11.9 dB and the10-dB impedance bandwidth of 15%. The different radiation directivity of the two-beam reconfigurable antenna can be achieved by controlling the chemical potentials of the graphene embedded in the parasitic stubs. The achievable peak gain of the proposed two-beam reconfigurable antenna is about 7.8 dB. Furthermore, we propose a four-beam reconfigurable Yagi-Uda antenna, which has stable reflection-coefficient performance although four main beams in reconfigurable cases point to four totally different directions. The corresponding peak gain, front-to-back ratio, and 10-dB impedance bandwidth of the four-beam reconfigurable antenna are about 6.4 dB, 12 dB, and 10%, respectively. Therefore, this novel design method of reconfigurable antennas is extremely promising for beam-scanning in terahertz and mid-infrared plasmonic devices and systems.

PCB management at Manitoba Hydro's Waverley Service Centre

International Nuclear Information System (INIS)

Rempel, R.G.; Engstrom, T.

1996-01-01

Manitoba Hydro was the first Canadian utility to initiate a program to decontaminate insulating oil contaminated with polychlorinated biphenyls (PCBs). This paper describes Manitoba Hydro's recovery, reuse and recycling program, operated out of the utility's Waverley Service Centre (WSC). The WSC is a central facility serving to phase out and and destroy PCBs which remain in Manitoba Hydro's electrical system. Several hundred thousand litres of PCB-contaminated insulating oil are decontaminated annually at the WSC. The decontaminated oil is then reconditioned for reuse within the system operations. A PCBX unit was purchased from Sun Ohio for the decontamination of insulating oils containing PCBs. PCB decontamination is achieved through a chemical dechlorination treatment process. The PCBX treatment unit and the PCB storage building were described. 18 refs., 8 figs

Fast and parallel determination of PCB 77 and PCB 180 in plasma using ultra performance liquid chromatography with diode array detection: A pharmacokinetic study in Swiss albino mouse.

Science.gov (United States)

Ramanujam, N; Sivaselvakumar, M; Ramalingam, S

2017-11-01

A simple, sensitive and reproducible ultra-performance liquid chromatography (UPLC) method has been developed and validated for simultaneous estimation of polychlorinated biphenyl (PCB) 77 and PCB 180 in mouse plasma. The sample preparation was performed by simple liquid-liquid extraction technique. The analytes were chromatographed on a Waters Acquity H class UPLC system using isocratic mobile phase conditions at a flow rate of 0.3 mL/min and Acquity UPLC BEH shield RP 18 column maintained at 35°C. Quantification was performed on a photodiode array detector set at 215 nm and PCB 101 was used as internal standard (IS). PCB 77, PCB 180, and IS retention times were 2.6, 4.7 and 2.8 min, respectively, and the total run time was 6 min. The method was validated for specificity, selectivity, recovery, linearity, accuracy, precision and sample stability. The calibration curve was linear over the concentration range 10-3000 ng/mL for PCB 77 and PCB 180. Intra- and inter-day precisions for PCBs 77 and 180 were found to be good with CV <4.64%, and the accuracy ranged from 98.90 to 102.33% in mouse plasma. The validated UPLC method was successfully applied to the pharmacokinetic study of PCBs 77 and 180 in mouse plasma. Copyright © 2017 John Wiley & Sons, Ltd.

Reconfigurable Braille display with phase change locking

Science.gov (United States)

Soule, Cody W.; Lazarus, Nathan

2016-07-01

Automatically updated signs and displays for sighted people are common in today’s world. However, there is no cheap, low power equivalent available for the blind. This work demonstrates a reconfigurable Braille cell using the solid-to-liquid phase change of a low melting point alloy as a zero holding power locking mechanism. The device is actuated with the alloy in the liquid state, and is then allowed to solidify to lock the Braille dot in the actuated position. A low-cost manufacturing process is developed that includes molding of a rigid silicone to create pneumatic channels, and bonding of a thin membrane of a softer silicone on the surface for actuation. A plug of Field’s metal (melting point 62 °C) is placed in the pneumatic channels below each Braille dot to create the final device. The device is well suited for low duty cycle operation in applications such as signs, and is able to maintain its state indefinitely without additional power input. The display requires a pneumatic pressure of only 24 kPa for actuation, and reconfiguration has been demonstrated in less than a minute and a half.

Reconfigurable fault tolerant avionics system

Science.gov (United States)

Ibrahim, M. M.; Asami, K.; Cho, Mengu

This paper presents the design of a reconfigurable avionics system based on modern Static Random Access Memory (SRAM)-based Field Programmable Gate Array (FPGA) to be used in future generations of nano satellites. A major concern in satellite systems and especially nano satellites is to build robust systems with low-power consumption profiles. The system is designed to be flexible by providing the capability of reconfiguring itself based on its orbital position. As Single Event Upsets (SEU) do not have the same severity and intensity in all orbital locations, having the maximum at the South Atlantic Anomaly (SAA) and the polar cusps, the system does not have to be fully protected all the time in its orbit. An acceptable level of protection against high-energy cosmic rays and charged particles roaming in space is provided within the majority of the orbit through software fault tolerance. Check pointing and roll back, besides control flow assertions, is used for that level of protection. In the minority part of the orbit where severe SEUs are expected to exist, a reconfiguration for the system FPGA is initiated where the processor systems are triplicated and protection through Triple Modular Redundancy (TMR) with feedback is provided. This technique of reconfiguring the system as per the level of the threat expected from SEU-induced faults helps in reducing the average dynamic power consumption of the system to one-third of its maximum. This technique can be viewed as a smart protection through system reconfiguration. The system is built on the commercial version of the (XC5VLX50) Xilinx Virtex5 FPGA on bulk silicon with 324 IO. Simulations of orbit SEU rates were carried out using the SPENVIS web-based software package.

40 CFR 761.2 - PCB concentration assumptions for use.

Science.gov (United States)

2010-07-01

... dielectric fluid are unknown, any person must assume the transformer to be a PCB Transformer. (4) Any person must assume that a capacitor manufactured prior to July 2, 1979, whose PCB concentration is not established contains ≥500 ppm PCBs. Any person may assume that a capacitor manufactured after July 2, 1979, is...

Do fish growth rates correlate with PCB body burdens?

Science.gov (United States)

Andrew L. Rypel; David R.. Bayne

2010-01-01

We evaluated whether growth rates of six fish species correlated with PCB concentrations in a moderately-to-heavily polluted freshwater ecosystem. Using a large dataset (n ¼ 984 individuals), and after accounting for growth effects related to fish age, habitat, sex, and lipids, growth correlated significantly, but positively with lipid-corrected PCB concentrations for...

Go reconfigure: how fish change shape as they swim and evolve.

Science.gov (United States)

Long, John H; Porter, Marianne E; Root, Robert G; Liew, Chun Wai

2010-12-01

The bodies of fish change shape over propulsive, behavioral, developmental, and evolutionary time scales, a general phenomenon that we call "reconfiguration". Undulatory, postural, and form-reconfiguration can be distinguished, studied independently, and examined in terms of mechanical interactions and evolutionary importance. Using a combination of live, swimming fishes and digital robotic fish that are autonomous and self-propelled, we examined the functional relation between undulatory and postural reconfiguration in forward swimming, backward swimming, and yaw turning. To probe how postural and form reconfiguration interact, the yaw turning of leopard sharks was examined using morphometric and kinematic analyses. To test how undulatory reconfiguration might evolve, the digital robotic fish were subjected to selection for enhanced performance in a simulated ecology in which each individual had to detect and move towards a food source. In addition to the general issue of reconfiguration, these investigations are united by the fact that the dynamics of undulatory and postural reconfigurations are predicted to be determined, in part, by the structural stiffness of the fish's body. Our method defines undulatory reconfiguration as the combined, point-by-point periodic motion of the body, leaving postural reconfiguration as the combined deviations from undulatory reconfiguration. While undulatory reconfiguration appears to be the sole or primary propulsive driver, postural reconfiguration may contribute to propulsion in hagfish and it is correlated with differences in forward, and backward, swimming in lamprey. Form reconfigures over developmental time in leopard sharks in a manner that is consistent with an allometric scaling theory in which structural stiffness of the body is held constant. However, correlation of a form proxy for structural stiffness of the body suggests that body stiffness may scale in order to limit maximum postural reconfiguration during routine

Experimental feeding of DDE and PCB to female big brown bats (Eptesicus fuscus). [1,1-dichloro-2,2-bis(p-chlorophenyl)-ethylene

Energy Technology Data Exchange (ETDEWEB)

Clark, D.R. Jr.; Prouty, R.M.

1977-03-01

Twenty-two female big brown bats (Eptesicus fuscus) were collected in a house attic in Montgomery County, Maryland. Seventeen were fed mealworms (Tenebrio molitor larvae) that contained 166 ppM DDE; the other five were fed uncontaminated mealworms. After 54 days of feeding, six dosed bats were frozen and the remaining 16 were starved to death. In a second experiment, 21 female big brown bats were collected in a house attic in Prince Georges County, Maryland. Sixteen were fed mealworms that contained 9.4 ppM Aroclor 1254 (PCB). After 37 days, two bats had died, four dosed bats were frozen, and the remaining 15 were starved to death. Starvation caused mobilization of stored residues. After the feeding periods, average weights of all four groups (DDE-dosed, DDE control, PCB-dosed, PCB control) had increased. However, weights of DDE-dosed bats had increased significantly more than those of their controls, whereas weights of PCB-dosed bats had increased significantly less than those of their controls. During starvation, PCB-dosed bats lost weight significantly more slowly than controls. Because PCB levels in dosed bats resembled levels found in some free-living big brown bats, PCBs may be slowing metabolic rates of some free-living bats. It is not known how various common organochlorine residues may affect metabolism in hibernating bats.

Water-quality assessment of the Upper Mississippi River Basin, Minnesota and Wisconsin- Polychlorinated biphenyls in common carp and walleye fillets, 1975-95

Science.gov (United States)

Lee, Kathy E.; Anderson, Jesse P.

1998-01-01

Spatial and temporal distribution of polychlorinated biphenyls (PCBs) in common carp (Cyprinus carpio) and walleye (Stizostedion vitreum) fillets from rivers in the Upper Mississippi River Basin upstream of the outlet of Lake Pepin are summarized. PCB concentrations in common carp and walleye fillets collected from rivers in the UMIS during 1975-95 by the Minnesota Fish Contaminant Monitoring Program (MFCMP) and the Wisconsin Department of Natural Resources (WDNR) were analyzed. PCBs in fish tissue are of concern because PCBs are potentially toxic, teratogenic, and are linked to poor fetal development and endocrine disruption in fish and other animals including humans, that consume fish. This summary was part of an analysis of historical data for the Upper Mississippi River (UMIS) study unit of the National Water-Quality Assessment (NAWQA) Program. The UMIS study unit is a 47,000 square-mile basin that includes the drainage of the Mississippi River upstream of the outlet of Lake Pepin and encompasses the Twin Cities metropolitan area. PCB concentrations for individual samples at all sites ranged from 0.07 to 33.0 milligrams per kilograms (mg/kg) for common carp and from 0.07 to 9.8 mg/kg for walleye during 1975-95. During 1975-79 and 1980-87, 10 and 4 percent of walleye samples and 45 and 36 percent of common carp samples, respectively, exceeded the U.S. Food and Drug Administration guideline of 2 mg/kg PCB in fish tissue. PCB concentrations in individual common carp and walleye samples were below 2 mg/kg after 1987. Median PCB concentrations at individual sites and within stream segments were generally greatest in common carp and walleye from Mississippi River segments in the TCMA during 1975-79 and 1980-87. There was a significant difference among lipid-normalized PCB (LNPCB) concentrations in common carp, considering all stream segments combined, during all three time periods (1975-79, 1980-87, and 1988-95). LNPCB concentrations in common carp and walleye at

Differences in energy expenditures and growth dilution explain higher PCB concentrations in male summer flounder

Science.gov (United States)

Madenjian, Charles P.; Jensen, Olaf P.; Rediske, Richard R.; O'Keefe, James P.; Vastano, Anthony R.; Pothoven, Steven A.

2016-01-01

Comparison of polychlorinated biphenyl (PCB) concentrations between the sexes of mature fish may reveal important behavioral and physiological differences between the sexes. We determined whole-fish PCB concentrations in 23 female summer flounder Paralichthys dentatus and 27 male summer flounder from New Jersey coastal waters. To investigate the potential for differences in diet or habitat utilization between the sexes, carbon and nitrogen stable isotope ratios were also determined. In 5 of the 23 female summer flounder, PCB concentrations in the somatic tissue and ovaries were determined. In addition, we used bioenergetics modeling to assess the contribution of the growth dilution effect to the observed difference in PCB concentrations between the sexes. Whole-fish PCB concentrations for females and males averaged 87 and 124 ng/g, respectively; thus males were 43% higher in PCB concentration compared with females. Carbon and nitrogen stable isotope ratios did not significantly differ between the sexes, suggesting that diet composition and habitat utilization did not vary between the sexes. Based on PCB determinations in the somatic tissue and ovaries, we predicted that PCB concentration of females would increase by 0.6%, on average, immediately after spawning due to release of eggs. Thus, the change in PCB concentration due to release of eggs did not explain the higher PCB concentrations observed in males. Bioenergetics modeling results indicated that the growth dilution effect could account for males being 19% higher in PCB concentration compared with females. Thus, the bulk of the observed difference in PCB concentrations between the sexes was not explained by growth dilution. We concluded that a higher rate of energy expenditure in males, stemming from greater activity and a greater resting metabolic rate, was most likely the primary driver for the observed difference in PCB concentrations between the sexes.

Differences in Energy Expenditures and Growth Dilution Explain Higher PCB Concentrations in Male Summer Flounder.

Directory of Open Access Journals (Sweden)

Charles P Madenjian

Full Text Available Comparison of polychlorinated biphenyl (PCB concentrations between the sexes of mature fish may reveal important behavioral and physiological differences between the sexes. We determined whole-fish PCB concentrations in 23 female summer flounder Paralichthys dentatus and 27 male summer flounder from New Jersey coastal waters. To investigate the potential for differences in diet or habitat utilization between the sexes, carbon and nitrogen stable isotope ratios were also determined. In 5 of the 23 female summer flounder, PCB concentrations in the somatic tissue and ovaries were determined. In addition, we used bioenergetics modeling to assess the contribution of the growth dilution effect to the observed difference in PCB concentrations between the sexes. Whole-fish PCB concentrations for females and males averaged 87 and 124 ng/g, respectively; thus males were 43% higher in PCB concentration compared with females. Carbon and nitrogen stable isotope ratios did not significantly differ between the sexes, suggesting that diet composition and habitat utilization did not vary between the sexes. Based on PCB determinations in the somatic tissue and ovaries, we predicted that PCB concentration of females would increase by 0.6%, on average, immediately after spawning due to release of eggs. Thus, the change in PCB concentration due to release of eggs did not explain the higher PCB concentrations observed in males. Bioenergetics modeling results indicated that the growth dilution effect could account for males being 19% higher in PCB concentration compared with females. Thus, the bulk of the observed difference in PCB concentrations between the sexes was not explained by growth dilution. We concluded that a higher rate of energy expenditure in males, stemming from greater activity and a greater resting metabolic rate, was most likely the primary driver for the observed difference in PCB concentrations between the sexes.

MT-ADRES: Multithreading on Coarse-Grained Reconfigurable Architecture

DEFF Research Database (Denmark)

Wu, Kehuai; Kanstein, Andreas; Madsen, Jan

2007-01-01

The coarse-grained reconfigurable architecture ADRES (Architecture for Dynamically Reconfigurable Embedded Systems) and its compiler offer high instruction-level parallelism (ILP) to applications by means of a sparsely interconnected array of functional units and register files. As high-ILP archi......The coarse-grained reconfigurable architecture ADRES (Architecture for Dynamically Reconfigurable Embedded Systems) and its compiler offer high instruction-level parallelism (ILP) to applications by means of a sparsely interconnected array of functional units and register files. As high......-ILP architectures achieve only low parallelism when executing partially sequential code segments, which is also known as Amdahl’s law, this paper proposes to extend ADRES to MT-ADRES (Multi-Threaded ADRES) to also exploit thread-level parallelism. On MT-ADRES architectures, the array can be partitioned in multiple...

Lattice Automata for Control of Self-Reconfigurable Robots

DEFF Research Database (Denmark)

Støy, Kasper

2015-01-01

are extreme versatility and robustness. The organisation of self-reconfigurable robots in a lattice structure and the emphasis on local communication between modules mean that lattice automata are a useful basis for control of self-reconfigurable robots. However, there are significant differences which arise...... mainly from the physical nature of self-reconfigurable robots as opposed to the virtual nature of lattice automata. The problems resulting from these differences are mutual exclusion, handling motion constraints of modules, and unrealistic assumption about global, spatial orientation. Despite...... these problems the self-reconfigurable robot community has successfully applied lattice automata to simple control problems. However, for more complex problems hybrid solutions based on lattice automata and distributed algorithms are used. Hence, lattice automata have shown to have potential for the control...

3D Embedded Reconfigurable Riometer for Heliospheric Space Missions

Science.gov (United States)

Dekoulis, George

2016-07-01

This paper describes the development of a new three-dimensional embedded reconfigurable Riometer for performing remote sensing of planetary magnetospheres. The system couples the in situ measurements of probe or orbiter magnetospheric space missions. The new prototype features a multi-frequency mode that allows measurements at frequencies, where heliospheric physics events' signatures are distinct on the ionized planetary plasma. For our planet similar measurements are meaningful for frequencies below 55 MHz. Observation frequencies above 55 MHz yield to direct measurements of the Cosmic Microwave Background intensity. The system acts as a prototyping platform for subsequent space exploration phased-array imaging experiments, due to its high-intensity scientific processing capabilities. The performance improvement over existing systems in operation is in the range of 80%, due to the state-of-the-art hardware and scientific processing used.

Study of penetration behavior of PCB-DNAPL in a sand layer by a column experiment.

Science.gov (United States)

Okuda, Nobuyasu; Shimizu, Takaaki; Muratani, Masaru; Terada, Akihiko; Hosomi, Masaaki

2014-11-01

To better understand the infiltration performances of high concentration PCB oils (KC-300 and KC-1000 polychlorinated biphenyl (PCB) mixtures), representative dense non-aqueous phase liquid (DNAPL), under both saturated and unsaturated conditions, we conducted experiments on a sand column filled with Toyoura Standard Sand. When PCB oil with the volume comparable to the total porosity in the column was supplied, the residual PCB concentrations under PCB-water conditions were 4.9×10(4)mgkg(-1) in KC-300 and 3.9×10(4)mgkg(-1) in KC-1000. Under PCB-air conditions, residual PCB concentrations were 6.0×10(4)mgkg(-1) and 2.4×10(5)mgkg(-1) in the upper and lower parts for KC-300 and 3.6×10(4)mgkg(-1) and 1.5×10(5)mgkg(-1) in those for KC-1000, respectively, while the rest of the PCBs were infiltrated. On the other hand, when a small amount of PCB oil with the volume far smaller than the total porosity in the column was supplied, the original PCBs were not transported via water permeation. However, lower-chlorinated PCB congeners-e.g., di- or tri-chlorinated biphenyls-preferentially dissolved and were infiltrated from the bottom of the column. These propensities on PCB oil infiltration can be explained in conjunction with the degree of PCB saturation in the sand column. Copyright © 2014 Elsevier Ltd. All rights reserved.

Assessment of the Polychlorinated Biphenyl (PCB Occurrence in Copper Sulfates and the Influential Role of PCB Levels on Grapes.

Directory of Open Access Journals (Sweden)

Xiaomin Li

Full Text Available Copper sulfates (CuSO4 are widely used as the primary component of fungicides in the grape industry. The agricultural-grade CuSO4 that we collected from Chinese nationwide markets were found to be contaminated by polychlorinated dibenzo-p-dioxins and dibenzofurans and high levels of polychlorinated biphenyls (Σ19PCBs: 0.32~9.51 ng/g. In the following research, we studied the impact of CuSO4 application on PCB levels in grape products through a field experiment, and conducted a national survey to speculate the role that CuSO4 played on the occurrence of PCB in grapes. In the field experiment, an obvious increase of PCBs in grape leaves (from 174 to 250 pg/g fw was observed after Bordeaux mixture (the main component of which is CuSO4 application. As to the main PCB congener in CuSO4, the most toxic CB 126 (toxic equivalency factor = 0.1 also increased in grape peels (from 1.66 to 2.93 pg/g fw after pesticide spray. Both the correlation study and the principal component analysis indicated that environmental factors were dominant PCB contributors to grapes, and grapes from e-waste dismantling area containing the highest PCBs also proved the notion. It is worth noting that this report describes the first research examining PCBs in CuSO4 and its influence on agricultural products to date.

Tracking Polychlorinated Biphenyls (PCB) after an incident along a river system - Case study Elbe River

Science.gov (United States)

Kleisinger, Carmen; Dietrich, Stephan; Kehl, Nora; Claus, Evelyn; Schubert, Birgit

2017-04-01

In spring 2015, extremely high concentrations of Polychlorinated Biphenyls (PCB) well above the long-term average were detected in suspended particulate matter (SPM) within the River Elbe. They were released due to abrasive blasting of the old coating from a bridge in the upper part of the River, approximately 50 km upstream of the first measurement site. PCBs are persistent organic pollutants, preferentially bound to fine-grained fractions of the SPM. Results from monitoring of contaminants in SPM along the Elbe indicate the further dispersal of the PCB-contaminated sediments. These measurements include yearly investigations on PCB concentrations in sediments in the inner reaches of the Elbe, an additional longitudinal survey in 2015 and monthly monitoring of PCBs in SPM at stations along the river including the Elbe estuary (Germany). The Elbe estuary is of major economic importance since Hamburg harbour, one of the largest harbours in Europe, is located there. Maintaining the harbour includes dredging and, i.a., relocating large amounts of the dredged material within the water body. High PCB concentrations in sediments could lead to restrictions on the relocation of these sediments. This study aims at tracking the fate of PCB contaminated material released from the point source of the incident site along the whole river stretch and at estimating its impact on the quality of sediments and consequently on dredging activities in the estuary. The ratio of high (PCB 138, 152 and 180) versus low (PCB 28, 52, 101) chlorinated PCB congeners proved to be a suitable tracer to distinguish the PCB load released by the incident from the long-term background signals. As Delor 106/Clophen A60, which contains approx. 90% hexa- to decachloric congeners, was an additive in the coating of the bridge, the pattern of PCBs released by the incident is dominated by the highly chlorinated PCB-congeners PCB 138, 153 and 180. At the tidal weir Geesthacht, the entrance to the estuary, an

Effect van PCB's op de energiekosten van migratie en bloedparameters van Europese aal

NARCIS (Netherlands)

Ginneken, van V.J.T.; Palstra, A.P.; Nieveen, M.; Berg, van den J.H.J.; Murk, A.J.

2005-01-01

Er zijn nog steeds PCB's aanwezig in het ecosysteem (water en land). Als palingen 6000 km migreren, zullen ze hun vetreserves aanspreken en komen er giftige PCB's vrij in het lichaam. Daarnaast kan de embryonale ontwikkeling nadelig beïnvloed worden door ophoping van PCB's in dooiermateriaal.

Electroremediation of PCB contaminated soil combined with iron nanoparticles: Effect of the soil type

DEFF Research Database (Denmark)

Gomes, Helena I.; Dias-Ferreira, Celia; Ottosen, Lisbeth M.

2015-01-01

Polychlorinated biphenyls (PCB) are carcinogenic and persistent organic pollutants that accumulate in soils and sediments. Currently, there is no cost-effective and sustainable remediation technology for these contaminants. In this work, a new combination of electrodialytic remediation and zero...... nanoparticles. Remediation experiments are made with two different historically PCB contaminated soils, which differ in both soil composition and contamination source. Soil 1 is a mix of soils with spills of transformer oils, while Soil 2 is a superficial soil from a decommissioned school where PCB were used...... as windows sealants. Saponin, a natural surfactant, was also tested to increase the PCB desorption from soils and enhance dechlorination. Remediation of Soil 1 (with highest pH, carbonate content, organic matter and PCB concentrations) obtained the maximum 83% and 60% PCB removal with the two...

Recent Developments of Reflectarray Antennas for Reconfigurable Beams Using Surface-Mounted RF-MEMS

Directory of Open Access Journals (Sweden)

Eduardo Carrasco

2012-01-01

Full Text Available Some of the most recent developments in reconfigurable reflectarrays using surface-mounted RF-MEMS, which have been developed at the Universidad Politécnica de Madrid, are summarized in this paper. The results include reconfigurable elements based on patches aperture-coupled to delay lines in two configurations: single elements and gathered elements which form subarrays with common phase control. The former include traditional aperture-coupled elements and a novel wideband reflectarray element which has been designed using two stacked patches. The latter are proposed as a low cost solution for reducing the number of electronic control devices as well as the manufacturing complexity of large reflectarrays. The main advantages and drawbacks of the grouping are evaluated in both pencil and shaped-beam antennas. In all the cases, the effects of the MEMS switches and their assembly circuitry are evaluated when they are used in a 2-bit phase shifter which can be extended to more bits, demonstrating that the proposed elements can be used efficiently in reconfigurable-beam reflectarrays.

Modular reconfigurable machine tools: design, control and evaluation

CSIR Research Space (South Africa)

Padayachee, J

2009-11-01

Full Text Available The reconfigurable manufacturing system (RMS) paradigm encapsulates methodologies that enable manufacturing systems to cope effectively with market and product changes. This research presents the design and evaluation of modular reconfigurable...

Multiple mechanisms of PCB neurotoxicity

Energy Technology Data Exchange (ETDEWEB)

Carpenter, D.O.; Stoner, C.T.; Lawrence, D.A. [Univ. of New York, Albany, NY (United States)] [and others

1996-12-31

Polychlorinated biphenyls (PCBs) have been implicated in cancer, but many of the symptoms in humans exposed to PCBs are related to the nervous system and behavior. We demonstrated three different direct mechanisms whereby PCBs are neurotoxic in rats. By using flow cytometry, we demonstrated that the orthosubstituted PCB congener 2,4,4{prime}, but neither TCDD nor the coplanar PCB congener 3,4,5,3{prime},4{prime}, causes rapid death of cerebellar granule cells. The ortho-substituted congener 2,4,4{prime} reduced long-term potentiation, an indicator of cognitive potential, in hippocampal brain slices, but a similar effect was observed for the coplanar congener 3,4,3{prime},4{prime}, indicating that this effect may be caused by both ortho- and coplanar congeners by mechanisms presumably not mediated via the Ah receptor. It was previously shown that some ortho-substituted PCB congeners cause a reduction in levels of the neurotransmitter dopamine, and we present in vitro and in vivo evidence that this is due to reduction of synthesis of dopamine via inhibition of the enzyme tyrosine hydroxylase. Thus, PCBs have a variety of mechanisms of primary neurotoxicity, and neurotoxicity is a characteristic of ortho-substituted, non-dioxin-like congeners as well as some coplanar congeners. The relative contribution of each of these mechanisms to the loss of cognitive function in humans exposed to PCBs remains to be determined. 42 refs., 3 figs., 1 tab.

Bioaccumulation of PCB Contaminants in Five Fish Species in Utah Lake as Affected by Carp Removal

Science.gov (United States)

Sanjinez-Guzmán, V. A.; Cadet, E. L.; Crandall, T.; Chamberlain, T.; Rakotoarisaona, H.; Morris, P.

2017-12-01

State reports published by the Utah Department of Health (2005) and the Utah Department of Water Quality (2008) determined that there were elevated levels of PCBs (Polychlorinated biphenyls) that exceeded the EPA's cancer (0.02 𝑚𝑔 𝑘𝑔-1) and non-cancer screening levels (0.08 𝑚𝑔 𝑘𝑔-1) in two fish species from Utah Lake, the Common Carp (Cyprinus carpio) and the Channel Catfish (Ictalurus punctatus). Fish consumption advisories were issued for both of these fish species due to their health effects of PCBs. The Common Carp is a non-native predatory species that comprise 90% of the biomass in Utah Lake. As of September 2009, an extensive carp removal program was instituted by the Department of Natural Resources and began the removal of 75% of the carp population. The purpose of this study is to assess the impact of carp removal on PCB levels in five sport fish species consumed by Utah citizens. The fish being analyzed are the Common Carp (Cyprinus carpio), Channel Catfish (Ictalurus punctatus), Black Bullhead (Ameiurus melas), Walleye (Sander vitreus), and White Bass (Morone chrysops). One-hundred twenty (120) fish were collected from Utah Lake and subcategorized by their gender, tissue type (fillet and offal), weight, and size: small (under 33 cm), medium (33 cm - 43 cm), and large (greater than 43 cm). This was done in order to determine the variation of contaminant levels in each subcategory. PCB analysis was performed by Utility Testing Laboratory in Salt Lake City, Utah. Results show there has been a significant increase in PCB levels in all fish species in comparison with the state reports (2008). All fish species have exceeded the EPA cancer screening level, except for the fillet tissue of the White Bass species. In Common Carp fillet, and offal decreased concentrations of 11.80% and 23.72%, respectively. In Channel catfish: the PCB levels in the fillet increase by 87.93%, however, the offal levels

Males exceed females in PCB concentrations of cisco (Coregonus artedi) from Lake Superior

Science.gov (United States)

Madenjian, Charles P.; Yule, Daniel L.; Chernyak, Sergei M.; Begnoche, Linda J.; Berglund, Eric K.; Isaac, Edmund J.

2014-01-01

We determined whole-fish polychlorinated biphenyl (PCB) concentrations of 25 male and 25 female age-7 ciscoes (Coregonus artedi) captured from a spawning aggregation in Thunder Bay, Lake Superior, during November 2010. We also determined PCB concentrations in the ovaries and somatic tissue of five additional female ciscoes (ages 5–22). All 55 of these ciscoes were in ripe or nearly ripe condition. Bioenergetics modeling was used to determine the contribution of the growth dilution effect toward a difference in PCB concentrations between the sexes, as females grew substantially faster than males. Results showed that the PCB concentration of males (mean = 141 ng/g) was 43% greater than that of females (mean = 98 ng/g), and this difference was highly significant (P ovaries and the somatic tissue of the five females were 135 and 100 ng/g, respectively. Based on these PCB determinations for the ovaries and somatic tissue, we concluded that release of eggs by females at previous spawnings was not a contributing factor to the observed difference in PCB concentrations between the sexes. Bioenergetics modeling results indicated that the growth dilution effect could explain males being higher than females in PCB concentration by only 3–7%. We concluded that the higher PCB concentration in males was most likely due to higher rate of energy expenditure, originating from greater activity and a higher resting metabolic rate. Mean PCB concentration in the cisco eggs was well below the U. S. Food and Drug Administration and Ontario Ministry of Environment guidelines of 2000 and 844 ng/g, respectively, and this finding may have implications for the cisco roe fishery currently operating in Lake Superior.

3rd IEEE/IFToMM International Conference on Reconfigurable Mechanisms and Robots

CERN Document Server

Kong, Xianwen; Dai, Jian; ReMAR 2015; Advances in Reconfigurable Mechanisms and Robots II

2016-01-01

This book presents the most recent advances in the research and applications of reconfigurable mechanisms and robots. It collects 93 independently reviewed papers presented at the Third ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots (ReMAR 2015) held in Beijing, China, 20-22 July 2015. The conference papers are organized into seven parts to cover the reconfiguration theory, topology, kinematics and design of reconfigurable mechanisms including reconfigurable parallel mechanisms. The most recent results on reconfigurable robots are presented including their analysis, design, simulation and control. Bio-inspired mechanisms are also explored in the challenging fields of rehabilitation and minimally invasive surgery. This book further addresses deployable mechanisms and origami-inspired mechanisms and showcases a wide range of successful applications of reconfigurable mechanisms and robots. Advances in Reconfigurable Mechanisms and Robots II should be of interest for researchers, eng...

Improving Reliability, Security, and Efficiency of Reconfigurable Hardware Systems (Habilitation)

NARCIS (Netherlands)

Ziener, Daniel

2017-01-01

In this treatise,  my research on methods to improve efficiency, reliability, and security of reconfigurable hardware systems, i.e., FPGAs, through partial dynamic reconfiguration is outlined. The efficiency of reconfigurable systems can be improved by loading optimized data paths on-the-fly on an

Removal of PCB from indoor air and surface materials by introduction of additional sorbing materials

DEFF Research Database (Denmark)

Gunnarsen, Lars Bo; Lyng, Nadja; Kolarik, Barbara

2017-01-01

Alleviation of indoor PCB contamination is extremely expensive because PCB from old primary sources has redistributed to most other surfaces over time. This study investigates the introduction of new removable sorbing materials as a method instantly lowering the concentration of PCB in indoor air...... and slowly decontaminating old surface materials. In three bedrooms of a contaminated apartment respectively new painted gypsum boards, sheets of flexible polyurethane foam and activated carbon fabric were introduced. The PCB concentrations in room air were monitored before the intervention and several times...... during the following 10 months. The PCB concentrations in the old surface materials as well as the new materials were also measured. An immediate reduction of PCB concentration in indoor air, a gradual increase of PCB in new material and as well a gradual reduction in old surface materials were...

Development of planar CT system for multi-layer PCB inspection

Energy Technology Data Exchange (ETDEWEB)

Kim, Seung Ho; Youn, Hanbean; Kam, Soohwa; Park, Eunpyeong; Kim, Ho Kyung [Pusan National University, Busan (Korea, Republic of)

2015-05-15

X-ray defect inspection apparatus can be used in the production line to inspect the PCB. However, a simple X-ray radiography cannot discriminate defects from the multi-layer PCBs because the layers of them overlays the defects. To complement this issue, computed tomography (CT) technology is applied to the NDT system which can offer 3-dimensional information of object. However, CT requires hundreds of projection images to examine a single PCB, hence real-time inspection is nearly impossible. In this study, we develop a planar computed tomography (pCT) system appropriate for the multi-layer PCB inspection. For the image reconstruction of planar cross-section images, we use the digital tomosynthesis (DTS) concept in association with the limited angle scanning. and performance characterization of the pCT system for the PCB inspection. The 3-d Fourier characteristics and more quantitative performance, such as contrast, uniformity, depth resolution will be presented. The cross-sectional images of multi-layer PCBs will also be demonstrated.

Carcinogenicity/tumour promotion by NDL PCB

Energy Technology Data Exchange (ETDEWEB)

Schrenk, D. [Kaiserslautern Univ. (Germany). Food Chemistry and Environmental Toxicology

2004-09-15

Polychlorinated biphenyls (PCBs) belong to the group of persistent environmental pollutants exhibiting neurotoxic, teratogenic and tumour-promoting effects in experimental animal models. PCB congeners can be divided into 'dioxinlike' and 'non-dioxinlike' congeners on the basis of their ability to act as aryl hydrocarbon receptor (AhR) agonists. Like the most toxic dioxin congener 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) 'dioxinlike' PCBs bind to the AhR and show characteristic effects on the expression of AhR-regulated genes including the induction of cytochrome P450 (CYP) 1A1. On the other hand, 'non-dioxinlike' PCB congeners have a lower or no binding affinity to the AhR, but exhibit a 'phenobarbital-type' induction of CYP 2B1/2 activity. A carcinogenic potential of PCBs has been demonstrated with technical mixtures such as Aroclors or Clophens. In these studies the liver and the thyroid gland were found to be the principal target organs of PCB-mediated carcinogenesis in rodents. No studies have been published, however, on the carcinogenicity of individual congeners. In two-stage initiation-promotion protocols in rats, both technical mixtures and individual 'dioxinlike' and 'non-dioxinlike' congeners were reported to act as liver tumour promoters.

Neural dynamics in reconfigurable silicon.

Science.gov (United States)

Basu, A; Ramakrishnan, S; Petre, C; Koziol, S; Brink, S; Hasler, P E

2010-10-01

A neuromorphic analog chip is presented that is capable of implementing massively parallel neural computations while retaining the programmability of digital systems. We show measurements from neurons with Hopf bifurcations and integrate and fire neurons, excitatory and inhibitory synapses, passive dendrite cables, coupled spiking neurons, and central pattern generators implemented on the chip. This chip provides a platform for not only simulating detailed neuron dynamics but also uses the same to interface with actual cells in applications such as a dynamic clamp. There are 28 computational analog blocks (CAB), each consisting of ion channels with tunable parameters, synapses, winner-take-all elements, current sources, transconductance amplifiers, and capacitors. There are four other CABs which have programmable bias generators. The programmability is achieved using floating gate transistors with on-chip programming control. The switch matrix for interconnecting the components in CABs also consists of floating-gate transistors. Emphasis is placed on replicating the detailed dynamics of computational neural models. Massive computational area efficiency is obtained by using the reconfigurable interconnect as synaptic weights, resulting in more than 50 000 possible 9-b accurate synapses in 9 mm(2).

Characterization of robotics parallel algorithms and mapping onto a reconfigurable SIMD machine

Science.gov (United States)

Lee, C. S. G.; Lin, C. T.

1989-01-01

The kinematics, dynamics, Jacobian, and their corresponding inverse computations are six essential problems in the control of robot manipulators. Efficient parallel algorithms for these computations are discussed and analyzed. Their characteristics are identified and a scheme on the mapping of these algorithms to a reconfigurable parallel architecture is presented. Based on the characteristics including type of parallelism, degree of parallelism, uniformity of the operations, fundamental operations, data dependencies, and communication requirement, it is shown that most of the algorithms for robotic computations possess highly regular properties and some common structures, especially the linear recursive structure. Moreover, they are well-suited to be implemented on a single-instruction-stream multiple-data-stream (SIMD) computer with reconfigurable interconnection network. The model of a reconfigurable dual network SIMD machine with internal direct feedback is introduced. A systematic procedure internal direct feedback is introduced. A systematic procedure to map these computations to the proposed machine is presented. A new scheduling problem for SIMD machines is investigated and a heuristic algorithm, called neighborhood scheduling, that reorders the processing sequence of subtasks to reduce the communication time is described. Mapping results of a benchmark algorithm are illustrated and discussed.

Enabling Manufacturing Competitiveness and Economic Sustainability : Proceedings of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production

CERN Document Server

2012-01-01

The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011) is “Enabling Manufacturing Competitiveness and Economic Sustainability”. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems’ economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability scalability and man...

Design Tools for Reconfigurable Hardware in Orbit (RHinO)

Science.gov (United States)

French, Mathew; Graham, Paul; Wirthlin, Michael; Larchev, Gregory; Bellows, Peter; Schott, Brian

2004-01-01

The Reconfigurable Hardware in Orbit (RHinO) project is focused on creating a set of design tools that facilitate and automate design techniques for reconfigurable computing in space, using SRAM-based field-programmable-gate-array (FPGA) technology. These tools leverage an established FPGA design environment and focus primarily on space effects mitigation and power optimization. The project is creating software to automatically test and evaluate the single-event-upsets (SEUs) sensitivities of an FPGA design and insert mitigation techniques. Extensions into the tool suite will also allow evolvable algorithm techniques to reconfigure around single-event-latchup (SEL) events. In the power domain, tools are being created for dynamic power visualiization and optimization. Thus, this technology seeks to enable the use of Reconfigurable Hardware in Orbit, via an integrated design tool-suite aiming to reduce risk, cost, and design time of multimission reconfigurable space processors using SRAM-based FPGAs.

An improved inventory of polychlorinated biphenyls in China: A case study on PCB-153

Science.gov (United States)

Xu, Yue; Tian, Chongguo; Wang, Xiaoping; Ma, Jianmin; Tang, Jianhui; Chen, Yingjun; Li, Jun; Zhang, Gan

2018-06-01

Emission inventory of pollutants is essential for the environmental fate study and management of the pollutant. To construct a reasonable PCB (polychlorinated biphenyls) inventory in China, this study estimates PCB usage and emission using power generating capacity, installed capacity of power plants and transformer substations, population density and GDP as surrogates. Inventory of representative PCB (PCB-153) with a resolution of 1/4° latitude × 1/4° longitude in China from 1952 to 2005 was generated and assessed as an example. Totally, about 20.3 kt PCBs were applied in China, of which 179 t were PCB-153. By the end of 2005, most of them (56.4%) were emitted into the soil, 2.7% entered the air, and about 20.8% was sealed in storage site or still in service. Historical emissions exhibited increasing trends after 1968, 1984 and 1994, which were mainly associated with usage or disposal processes. Although primary emission has been declined since 2005, the influence of secondary emission from soils, unintentionally produced PCBs (UP-PCB), and reemission from storage sites could be a long-lasting issue in the future. This new emission inventory improves previous PCB emission inventory significantly, which underestimated PCB emission in China considerably.

Dynamics of PCB removal and detoxification in historically contaminated soils amended with activated carbon

Energy Technology Data Exchange (ETDEWEB)

Vasilyeva, Galina K., E-mail: gkvasilyeva@issp.psn.r [Institute of Physicochemical and Biological Problems in Soil Science, Russian Academy of Sciences, Pushchino 142290 (Russian Federation); Strijakova, Elena R. [Institute of Physicochemical and Biological Problems in Soil Science, Russian Academy of Sciences, Pushchino 142290 (Russian Federation); Nikolaeva, Svetlana N.; Lebedev, Albert T. [Chemistry Department of Moscow State University, Moscow (Russian Federation); Shea, Patrick J. [School of Natural Resources, University of Nebraska-Lincoln (United States); Department of Environmental, Agricultural and Occupational Health, University of Nebraska Medical Center, Lincoln, NE 68583-0817 (United States)

2010-03-15

Activated carbon (AC) can help overcome toxicity of pollutants to microbes and facilitate soil bioremediation. We used this approach to treat a Histosol and an Alluvial soil historically contaminated with PCB (4190 and 1585 mg kg{sup -1}, respectively; primarily tri-, tetra- and pentachlorinated congeners). Results confirmed PCB persistence; reductions in PCB extractable from control and AC-amended soils were mostly due to a decrease in tri- and to some extent tetrachlorinated congeners as well as formation of a bound fraction. Mechanisms of PCB binding by soil and AC were different. In addition to microbial degradation of less chlorinated congeners, we postulate AC catalyzed dechlorination of higher chlorinated congeners. A large decrease in bioavailable PCB in AC-amended soils was demonstrated by greater clover germination and biomass. Phytotoxicity was low in treated soils but remained high in untreated soils for the duration of a 39-month experiment. These observations indicate the utility of AC for remediation of soils historically contaminated with PCB. - Activated carbon promotes remediation of soils historically contaminated with PCB.

Dynamics of PCB removal and detoxification in historically contaminated soils amended with activated carbon

International Nuclear Information System (INIS)

Vasilyeva, Galina K.; Strijakova, Elena R.; Nikolaeva, Svetlana N.; Lebedev, Albert T.; Shea, Patrick J.

2010-01-01

Activated carbon (AC) can help overcome toxicity of pollutants to microbes and facilitate soil bioremediation. We used this approach to treat a Histosol and an Alluvial soil historically contaminated with PCB (4190 and 1585 mg kg -1 , respectively; primarily tri-, tetra- and pentachlorinated congeners). Results confirmed PCB persistence; reductions in PCB extractable from control and AC-amended soils were mostly due to a decrease in tri- and to some extent tetrachlorinated congeners as well as formation of a bound fraction. Mechanisms of PCB binding by soil and AC were different. In addition to microbial degradation of less chlorinated congeners, we postulate AC catalyzed dechlorination of higher chlorinated congeners. A large decrease in bioavailable PCB in AC-amended soils was demonstrated by greater clover germination and biomass. Phytotoxicity was low in treated soils but remained high in untreated soils for the duration of a 39-month experiment. These observations indicate the utility of AC for remediation of soils historically contaminated with PCB. - Activated carbon promotes remediation of soils historically contaminated with PCB.

Effects of maternal exposure to estrogen and PCB on different life stages of Zebrafish (Danio rerio)

Energy Technology Data Exchange (ETDEWEB)

Olsson, Per-Erik; Westerlund, L; Billsson, K; Berg, A H [Umeaa Univ. (Sweden). Dept. of Cellular and Developmental Biology; Teh, S J; Hinton, D E [California Univ., Davis, CA (United States). Dept. of Anatomy, Physiology and Cell Biology; Tysklind, M [Umeaa Univ., (Sweden). Dept. of Environmental Chemistry; Nilsson, Jan; Eriksson, Lars-Ove [Swedish Univ. of Agricultural Sciences, Umeaa (Sweden). Dept. of Aquaculture

1999-02-01

PCBs have been found to impair both reproduction and development in fish. We have investigated the effects of 3 PCB congeners, 2,3,3`,4,4`,5,6-HpCB (PCB-190); 2,3,4,4`-TeCB (PCB-60); and 2,2`,4,6,6`-PeCB (PCB-104), and the estrogenic hormone 17{beta}-estradiol on fecundity, early life-stage mortality, gross morphology and histology of zebrafish (Danio rerio). While none of the studied substances reduced fecundity, they increased embryo and larval mortality. The most severe effects on viability were observed following treatment with 17{beta}-estradiol or the weakly estrogenic PCB-104. Following 17{beta}-estradiol or PCB-104 exposure, mortality continued through the yolksac absorption phase. PCB-60, on the other hand, resulted in mortality between the 30% epiboly stage and 75% epiboly stage. At the same time as embryos started to die, embryo development and hatching were delayed. PCB-190 showed only moderate effects on early-life stage mortality. The fish were reared until sexual maturation where after they were subjected to gross morphological and histological analyses. Changes in morphology were observed following PCB-104 and PCB-190 treatment. Both substances gave rise to craniofacial malformations while PCB-104 also led to lordosis in females and scoliosis in fish of both sexes. From histological analysis it was found that PCB-104 and 17{beta}-estradiol resulted in karyorrhexis and karyolysis in the kidney. Possible signs of bile stasis were observed following 17{beta}-estradiol and PCB-190 treatment. Some effects were observed on the gonads, including areas in the ovary showing atresia and limited failure of testicular spermatogenesis in 17{beta}-estradiol, PCB-104, and PCB-60 treated fish. While all studied substances resulted in effects on offspring, the observation that estrogenic substances are highly embryotoxic, raises concern that endocrine disrupting substances may severely reduce fish populations in polluted areas

40 CFR 761.298 - Decisions based on PCB concentration measurements resulting from sampling.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Decisions based on PCB concentration... Cleanup and On-Site Disposal of Bulk PCB Remediation Waste and Porous Surfaces in Accordance With § 761.61(a)(6) § 761.298 Decisions based on PCB concentration measurements resulting from sampling. (a) For...

Reconfigurable layout problem

NARCIS (Netherlands)

Meng, G.; Heragu, S.S.; Heragu, S.S.; Zijm, Willem H.M.

2004-01-01

This paper addresses the reconfigurable layout problem, which differs from traditional, robust and dynamic layout problems mainly in two aspects: first, it assumes that production data are available only for the current and upcoming production period. Second, it considers queuing performance

Ultra-Wideband Array in PCB for Millimeter-Wave 5G and ISM

Science.gov (United States)

Novak, Markus H.; Volakis, John L.; Miranda, Felix A.

2017-01-01

Growing mobile data consumption has prompted the exploration of the millimeter-wave spectrum for large bandwidth, high speed communications. However, the allocated bands are spread across a wide swath of spectrum: Fifth generation mobile architecture (5G): 28, 38, 39, 6471 GHz; Industrial, Scientific, and Medical bands (ISM): 24, 60 GHz. Moreover, high gain phased arrays are required to overcome the significant path loss associated with these frequencies. Further, it is necessary to incorporate several of these applications in a single, small size and low cost platform. To this end, we have developed a scanning, Ultra-Wideband (UWB) array which covers all 5G, ISM, and other mm-W bands from 2472 GHz. Critically, this is accomplished using mass-production Printed Circuit Board (PCB) fabrication. The results of this work are presented in this poster.

Determination of the human cytochrome P450 monooxygenase catalyzing the enantioselective oxidation of 2,2',3,5',6-pentachlorobiphenyl (PCB 95) and 2,2',3,4,4',5',6-heptachlorobiphenyl (PCB 183).

Science.gov (United States)

Nagayoshi, Haruna; Kakimoto, Kensaku; Konishi, Yoshimasa; Kajimura, Keiji; Nakano, Takeshi

2017-10-17

2,2',3,5',6-Pentachlorobiphenyl (PCB 95) and 2,2',3,4,4',5',6-heptachlorobiphenyl (PCB 183) possess axial chirality and form the aS and aR enantiomers. The enantiomers of these congeners have been reported to accumulate in the human body enantioselectively via unknown mechanisms. In this study, we determined the cytochrome P450 (CYP) monooxygenase responsible for the enantioselective oxidization of PCB 95 and PCB 183, using a recombinant human CYP monooxygenase. We evaluated 13 CYP monooxygenases, namely CYP1A1, CYP1A2, CYP1B1, CYP2A6, CYP2B6, CYP2C8, CYP2C19, CYP2E1, CYP2J2, CYP3A4, CYP3A5, CYP4F2, and aromatase (CYP19), and revealed that CYP2A6 preferably oxidizes aS-PCB 95 enantioselectively; however, it did not oxidize PCB 183. The enantiomer composition was elevated from 0.5 (racemate) to 0.54. In addition, following incubation with CYP2A6, the enantiomer fraction (EF) of PCB 95 demonstrated a time-dependent increase.

Males exceed females in PCB concentrations of cisco (Coregonus artedi) from Lake Superior.

Science.gov (United States)

Madenjian, Charles P; Yule, Daniel L; Chernyak, Sergei M; Begnoche, Linda J; Berglund, Eric K; Isaac, Edmund J

2014-09-15

We determined whole-fish polychlorinated biphenyl (PCB) concentrations of 25 male and 25 female age-7 ciscoes (Coregonus artedi) captured from a spawning aggregation in Thunder Bay, Lake Superior, during November 2010. We also determined PCB concentrations in the ovaries and somatic tissue of five additional female ciscoes (ages 5-22). All 55 of these ciscoes were in ripe or nearly ripe condition. Bioenergetics modeling was used to determine the contribution of the growth dilution effect toward a difference in PCB concentrations between the sexes, as females grew substantially faster than males. Results showed that the PCB concentration of males (mean = 141 ng/g) was 43% greater than that of females (mean = 98 ng/g), and this difference was highly significant (PPCB concentrations in the ovaries and the somatic tissue of the five females were 135 and 100 ng/g, respectively. Based on these PCB determinations for the ovaries and somatic tissue, we concluded that release of eggs by females at previous spawnings was not a contributing factor to the observed difference in PCB concentrations between the sexes. Bioenergetics modeling results indicated that the growth dilution effect could explain males being higher than females in PCB concentration by only 3-7%. We concluded that the higher PCB concentration in males was most likely due to higher rate of energy expenditure, originating from greater activity and a higher resting metabolic rate. Mean PCB concentration in the cisco eggs was well below the U. S. Food and Drug Administration and Ontario Ministry of Environment guidelines of 2000 and 844 ng/g, respectively, and this finding may have implications for the cisco roe fishery currently operating in Lake Superior. Published by Elsevier B.V.

40 CFR 761.316 - Interpreting PCB concentration measurements resulting from this sampling scheme.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Interpreting PCB concentration... § 761.79(b)(3) § 761.316 Interpreting PCB concentration measurements resulting from this sampling... composite is 20 µg/100 cm2, then the entire 9.5 square meters has a PCB surface concentration of 20 µg/100...

Dioxin-like (PCB 126) and non dioxin-like (PCB 153) action on DNA damage and apoptosis in granulosa cells. Preliminary data

Energy Technology Data Exchange (ETDEWEB)

Gregoraszczuk, E.L.; Wojtowicz, A. [Lab. of Physiology and Toxicology of Reproduction, Inst. of Zoology, Jagiellonian Univ., Krakow (Poland); Kapiszewska, M.; Magnowska, Z. [Dept. of General Biochemistry, Jagiellonian Univ., Krakow (Poland)

2004-09-15

Introduction Approximately 60-90% of all cancer cases are now generally believed to be due to environmental factors, to which humans are exposed by taking food, and water or inhaling air. These chemicals, including polycyclic aromatic hydrocarbons (PAHs), can be subdivided into different classes. TCDD was classified as group (documented carcinogen in humans) Benzo [a] pyrene and benzo [a] anthracene were included into group 2A (probably carcinogen in humans). PCB is not mentioned in this list. The International Agency for Research on Cancer (IARC) maintains a register of human carcinogens and suspected human carcinogens. The capacity of PCBs to induce DNA strand breaks has been studied to a lesser degree and is quite controversial. DNA strand breaks are the potentially mutagenic lesions that have been proposed as a genotoxicity biomarker for the biomonitoring of environmental pollutants. The mutations induced by these lesions in pollutant-exposed populations are believed to be induced by chemical carcinogens. The formation of PCB adducts has been demonstrated and measured in vitro and in vivo 3. The capacity of PCBs to form DNA adducts depends on their metabolic rate, which is determined by the degree of chlorination. The aim of the presented preliminary data was to evaluate the follicular stage-specific action of PCB 126 and PCB 153 on DNA damage and apoptosis in granulosa cells.

An FPGA-based reconfigurable DDC algorithm

Science.gov (United States)

Juszczyk, B.; Kasprowicz, G.

2016-09-01

This paper describes implementation of reconfigurable digital down converter in an FPGA structure. System is designed to work with quadrature signals. One of the main criteria of the project was to provied wide range of reconfiguration in order to fulfill various application rage. Potential applications include: software defined radio receiver, passive noise radars and measurement data compression. This document contains general system overview, short description of hardware used in the project and gateware implementation.

Value Assessment of Distribution Network Reconfiguration: A Danish Case Study

DEFF Research Database (Denmark)

Vaskantiras, Georgios; You, Shi

2016-01-01

. This paper presents a case study-based analysis to explore the potential value of reconfiguration in detail. The study is performed using a 10kV distribution grid of Denmark, while reconfiguration is applied to minimize the energy losses under both normal and post-fault conditions. The results show......Distribution network reconfiguration is a mechanism that can improve the distribution system performance from multiple perspectives. In the context of smart grid wherein the degrees of automation and intelligence are high, the potential value of network reconfiguration can be significant...

Radiated EMC immunity investigation of common recognition identification platform for medical applications

Science.gov (United States)

Miranda, Jorge; Cabral, Jorge; Ravelo, Blaise; Wagner, Stefan; Pedersen, Christian F.; Memon, Mukhtiar; Mathiesen, Morten

2015-01-01

An innovative e-healthcare platform named common recognition and identification platform (CRIP) was developed and tested as part of the CareStore project. CareStore and CRIP aims at delivering accurate and safe disease management by minimising human operator errors in hospitals and care facilities. To support this, the CRIP platform features fingerprint biometrics and near field communication (NFC) for user identification; and Bluetooth communication support for a range of telemedicine medical devices adhering to the IEEE 11073 standard. The aim of this study was to evaluate the electromagnetic compatibility (EMC) immunity of the CRIP platform in order to validate it for medical application use. The first prototype of CRIP was demonstrated to operate as expected by showing the user identification function feasibility, both via NFC and biometric, and by detection of Bluetooth devices via radio frequency (RF) scanning. The NFC module works in the 13.56 MHz band and the Bluetooth module work in the 2.4 GHz band, according to the IEEE 802.15.1 standard. The standard test qualification of the CRIP was performed based on the radiated EMC immunity with respect to the EN 61000-4-3 standard. The immunity tests were conducted under industrial EMC compliance with electric field aggression, with levels up to 10 V/m in both horizontal and vertical polarisations when the test antenna and the CRIP were placed at a distance of 3 m. It was found that the CRIP device complies with the European electromagnetic (EM) radiation immunity requirements.

Environment Canada defends decision to ban PCB waste exports

International Nuclear Information System (INIS)

Anon.

1995-01-01

The position of Environment Canada in banning the export of PCB waste to the United States was defended as falling within their jurisdiction under provisions of the the Canadian Environmental Protection Act. The United States had previously banned the import of Canadian PCBs, but when it reversed its decision Environment Canada posted an Interim Order, upholding the ban. The decision to do so was based on protection of the large investment that was made to develop the Canadian PCB incineration facility in Swan Lake, Alberta. Canada also had an obligation under the Basel Convention to reduce it cross boundary movement of hazardous waste and provide adequate destruction facilities in Canada. Legal implications of PCB exports and the uncertainty of continuing access to American facilities were also cited as reasons for issuing the Interim Order

Stereoselective bioaccumulation of chiral PCB 91 in earthworm and its metabolomic and lipidomic responses.

Science.gov (United States)

He, Zeying; Wang, Yuehua; Zhang, Yanwei; Cheng, Haiyan; Liu, Xiaowei

2018-07-01

Stereoselective bioaccumulation, elimination, metabolomic and lipidomic responses of earthworm Eisenia fetida exposed to chiral polychlorinated biphenyl (PCB) 91 in an earthworm-soil system were investigated. Preferential bioaccumulation of (-)-PCB 91 and elimination of (+)-PCB 91 were observed following 50 and 500 μg/kg dwt exposures. Enantiomer fraction (EF) values decreased over time during the uptake and elimination periods. Metabolomics and lipidomics techniques based on ultra-performance liquid chromatography/quadrupole time-of-flight mass spectrometry (UPLC-QTOF-MS) revealed significant changes in 108 metabolites after earthworms exposure to (+)-, (-)-, and (±)-PCB 91, compared to control groups. Forty two of these metabolites were identified as amino acids, nucleosides, fatty acids, dicarboxylic acids, vitamins or others. Lysophospholipids including six lysophosphatidylcholines (LPC), six lysophosphatidylethanolamine (LPE), eight lysophosphatidylinositol (LPI) and five lysophosphatidylserine (LPS) were also differentially expressed between exposure and control groups. Alterations in the levels of metabolites and lipids indicated stereoselective effects of chiral PCB 91 on earthworm amino acid, energy, and nucleotide metabolism, neurodevelopment and gene expression. Overall, the effects of (+)-PCB 91 were more pronounced than that of (-)- and (±)-PCB 91. Copyright © 2018 Elsevier Ltd. All rights reserved.

Effects of PCB contamination on the reproduction of the DAB Limanda limanda L. under laboratory conditions

Science.gov (United States)

Fonds, Mark; Casal, Elizabeth; Schweizer, Dominik; Boon, Jan P.; Van der Veer, Henk W.

The effect of PCB contamination on the reproduction of female dab was studied under laboratory conditions. Females were contaminated during gonad maturation by multiple oral administration of capsules containing the technical PCB mixture Clophen A40. PCB contamination resulted in increased levels in the eggs, with concentrations of selected PCB congeners of 35 to 86 μg·g -1 lipid for PCB-exposed fish, 10 μg·g -1 lipid for eggs from fish fed with mussel meat and fish fed with shrimp. A statistically significant dose-effect relationship was found between the PCB content of the eggs and the PCB dose ingested by the fish. For eggs from the PCB-treated fish the mean fertilization rate was 61% and mean hatching 45%, compared to 67% fertilization and 59% hatching for eggs from untreated fish. Rate of development and survival of the eggs and mortality of the larvae after hatching were mainly related to incubation temperature. No statistically significant differences between untreated and PCB-treated fish could be found in egg production, egg quality, fertilization rate, hatching rate and survival of larvae.

Reconfigurable Mobile Multimedia

NARCIS (Netherlands)

Smit, Gerardus Johannes Maria; Bos, M.; Havinga, Paul J.M.; Smit, Jaap

1999-01-01

This paper discusses reconfigurability issues in lowpower hand-held multimedia systems, with particular emphasis on energy conservation. We claim that a radical new approach has to be taken in order to fulfill the requirements - in terms of processing power and energy consumption - of future mobile

Space-Based Reconfigurable Software Defined Radio Test Bed Aboard International Space Station

Science.gov (United States)

Reinhart, Richard C.; Lux, James P.

2014-01-01

The National Aeronautical and Space Administration (NASA) recently launched a new software defined radio research test bed to the International Space Station. The test bed, sponsored by the Space Communications and Navigation (SCaN) Office within NASA is referred to as the SCaN Testbed. The SCaN Testbed is a highly capable communications system, composed of three software defined radios, integrated into a flight system, and mounted to the truss of the International Space Station. Software defined radios offer the future promise of in-flight reconfigurability, autonomy, and eventually cognitive operation. The adoption of software defined radios offers space missions a new way to develop and operate space transceivers for communications and navigation. Reconfigurable or software defined radios with communications and navigation functions implemented in software or VHDL (Very High Speed Hardware Description Language) provide the capability to change the functionality of the radio during development or after launch. The ability to change the operating characteristics of a radio through software once deployed to space offers the flexibility to adapt to new science opportunities, recover from anomalies within the science payload or communication system, and potentially reduce development cost and risk by adapting generic space platforms to meet specific mission requirements. The software defined radios on the SCaN Testbed are each compliant to NASA's Space Telecommunications Radio System (STRS) Architecture. The STRS Architecture is an open, non-proprietary architecture that defines interfaces for the connections between radio components. It provides an operating environment to abstract the communication waveform application from the underlying platform specific hardware such as digital-to-analog converters, analog-to-digital converters, oscillators, RF attenuators, automatic gain control circuits, FPGAs, general-purpose processors, etc. and the interconnections among

Enabling Fast ASIP Design Space Exploration: An FPGA-Based Runtime Reconfigurable Prototyper

Directory of Open Access Journals (Sweden)

Paolo Meloni

2012-01-01

Full Text Available Application Specific Instruction-set Processors (ASIPs expose to the designer a large number of degrees of freedom. Accurate and rapid simulation tools are needed to explore the design space. To this aim, FPGA-based emulators have recently been proposed as an alternative to pure software cycle-accurate simulator. However, the advantages of on-hardware emulation are reduced by the overhead of the RTL synthesis process that needs to be run for each configuration to be emulated. The work presented in this paper aims at mitigating this overhead, exploiting a form of software-driven platform runtime reconfiguration. We present a complete emulation toolchain that, given a set of candidate ASIP configurations, identifies and builds an overdimensioned architecture capable of being reconfigured via software at runtime, emulating all the design space points under evaluation. The approach has been validated against two different case studies, a filtering kernel and an M-JPEG encoding kernel. Moreover, the presented emulation toolchain couples FPGA emulation with activity-based physical modeling to extract area and power/energy consumption figures. We show how the adoption of the presented toolchain reduces significantly the design space exploration time, while introducing an overhead lower than 10% for the FPGA resources and lower than 0.5% in terms of operating frequency.

Automatic extraction of via in the CT image of PCB

Science.gov (United States)

Liu, Xifeng; Hu, Yuwei

2018-04-01

In modern industry, the nondestructive testing of printed circuit board (PCB) can prevent effectively the system failure and is becoming more and more important. In order to detect the via in the PCB base on the CT image automatically accurately and reliably, a novel algorithm for via extraction based on weighting stack combining the morphologic character of via is designed. Every slice data in the vertical direction of the PCB is superimposed to enhanced vias target. The OTSU algorithm is used to segment the slice image. OTSU algorithm of thresholding gray level images is efficient for separating an image into two classes where two types of fairly distinct classes exist in the image. Randomized Hough Transform was used to locate the region of via in the segmented binary image. Then the 3D reconstruction of via based on sequence slice images was done by volume rendering. The accuracy of via positioning and detecting from a CT images of PCB was demonstrated by proposed algorithm. It was found that the method is good in veracity and stability for detecting of via in three dimensional.

Microbial ecology of bacterially mediated PCB biodegradation

International Nuclear Information System (INIS)

Pettigrew, C.A. Jr.

1989-01-01

The roles of plasmid mediated and consortia mediated polychlorinated biphenyl (PCB) biodegradation by bacterial populations isolated from PCB contaminated freshwater sediments were investigated. PCB degrading bacteria were isolated by DNA:DNA colony hybridization, batch enrichments, and chemostat enrichment. Analysis of substrate removal and metabolite production were done using chlorinated biphenyl spray plates, reverse phase high pressure liquid chromatography, Cl - detection, and 14 C-labeled substrate mineralization methods. A bacterial consortium, designated LPS10, involved in a concerted metabolic attack on chlorinated biphenyls, was shown to mineralize 4-chlorobiphenyl (4CB) and 4,4'-dichlorobiphenyl (4,4' CB). The LPS10 consortium was isolated by both batch and chemostat enrichment using 4CB and biphenyl (BP) as sole carbon source and was found to have tree bacterial isolates that predominated; these included: Pseudomonas, testosteroni LPS10A which mediated the breakdown of 4CB and 4,4' CB to the putative meta-cleavage product and subsequently to 4-chlorobenzoic acid (4CBA), an isolate tentatively identified as an Arthrobacter sp. LPS10B which mediated 4CBA degradation, and Pseudomonas putida by A LPS10C whose role in the consortium has not been determined

Reconfiguring The Supply Chain For Complex Engineered Products

DEFF Research Database (Denmark)

Wæhrens, Brian Vejrum; Asmussen, Jesper Normann

2016-01-01

of the SC, the product and market requirements. This paper seeks to investigate the factors which create a need for supply chain reconfiguration in the context of the Complex Product Systems, together with the enablers and barriers for successfully realizing supply chain improvements through reconfiguration....

MT-ADRES: multi-threading on coarse-grained reconfigurable architecture

DEFF Research Database (Denmark)

Wu, Kehuai; Kanstein, Andreas; Madsen, Jan

2008-01-01

The coarse-grained reconfigurable architecture ADRES (architecture for dynamically reconfigurable embedded systems) and its compiler offer high instruction-level parallelism (ILP) to applications by means of a sparsely interconnected array of functional units and register files. As high-ILP archi......The coarse-grained reconfigurable architecture ADRES (architecture for dynamically reconfigurable embedded systems) and its compiler offer high instruction-level parallelism (ILP) to applications by means of a sparsely interconnected array of functional units and register files. As high......-ILP architectures achieve only low parallelism when executing partially sequential code segments, which is also known as Amdahl's law, this article proposes to extend ADRES to MT-ADRES (multi-threaded ADRES) to also exploit thread-level parallelism. On MT-ADRES architectures, the array can be partitioned...

Operating System Concepts for Reconfigurable Computing: Review and Survey

OpenAIRE

Marcel Eckert; Dominik Meyer; Jan Haase; Bernd Klauer

2016-01-01

One of the key future challenges for reconfigurable computing is to enable higher design productivity and a more easy way to use reconfigurable computing systems for users that are unfamiliar with the underlying concepts. One way of doing this is to provide standardization and abstraction, usually supported and enforced by an operating system. This article gives historical review and a summary on ideas and key concepts to include reconfigurable computing aspects in operating systems. The arti...

MDWeb and MDMoby: an integrated web-based platform for molecular dynamics simulations.

Science.gov (United States)

Hospital, Adam; Andrio, Pau; Fenollosa, Carles; Cicin-Sain, Damjan; Orozco, Modesto; Gelpí, Josep Lluís

2012-05-01

MDWeb and MDMoby constitute a web-based platform to help access to molecular dynamics (MD) in the standard and high-throughput regime. The platform provides tools to prepare systems from PDB structures mimicking the procedures followed by human experts. It provides inputs and can send simulations for three of the most popular MD packages (Amber, NAMD and Gromacs). Tools for analysis of trajectories, either provided by the user or retrieved from our MoDEL database (http://mmb.pcb.ub.es/MoDEL) are also incorporated. The platform has two ways of access, a set of web-services based on the BioMoby framework (MDMoby), programmatically accessible and a web portal (MDWeb). http://mmb.irbbarcelona.org/MDWeb; additional information and methodology details can be found at the web site ( http://mmb.irbbarcelona.org/MDWeb/help.php)

Intestinal exposure to PCB 153 induces inflammation via the ATM/NEMO pathway.

Science.gov (United States)

Phillips, Matthew C; Dheer, Rishu; Santaolalla, Rebeca; Davies, Julie M; Burgueño, Juan; Lang, Jessica K; Toborek, Michal; Abreu, Maria T

2018-01-15

Polychlorinated biphenyls (PCBs) are persistent organic pollutants that adversely affect human health. PCBs bio-accumulate in organisms important for human consumption. PCBs accumulation in the body leads to activation of the transcription factor NF-κB, a major driver of inflammation. Despite dietary exposure being one of the main routes of exposure to PCBs, the gut has been widely ignored when studying the effects of PCBs. We investigated the effects of PCB 153 on the intestine and addressed whether PCB 153 affected intestinal permeability or inflammation and the mechanism by which this occurred. Mice were orally exposed to PCB 153 and gut permeability was assessed. Intestinal epithelial cells (IECs) were collected and evaluated for evidence of genotoxicity and inflammation. A human IEC line (SW480) was used to examine the direct effects of PCB 153 on epithelial function. NF-кB activation was measured using a reporter assay, DNA damage was assessed, and cytokine expression was ascertained with real-time PCR. Mice orally exposed to PCB 153 had an increase in intestinal permeability and inflammatory cytokine expression in their IECs; inhibition of NF-кB ameliorated both these effects. This inflammation was associated with genotoxic damage and NF-кB activation. Exposure of SW480 cells to PCB 153 led to similar effects as seen in vivo. We found that activation of the ATM/NEMO pathway by genotoxic stress was upstream of NF-kB activation. These results demonstrate that oral exposure to PCB 153 is genotoxic to IECs and induces downstream inflammation and barrier dysfunction in the intestinal epithelium. Copyright © 2017 Elsevier Inc. All rights reserved.

Assessment of questionnaire-based PCB exposure focused on food frequency in birth cohorts in Japan.

Science.gov (United States)

Eguchi, Akifumi; Otake, Masae; Hanazato, Masamichi; Suzuki, Norimichi; Matsuno, Yoshiharu; Nakaoka, Hiroko; Todaka, Emiko; Mori, Chisato

2017-02-01

We investigated the relationship between food frequency questionnaire (FFQ) responses and serum polychlorinated biphenyl (PCB) levels of mothers and fathers recruited from the Chiba Regional Center, which is one of the 15 regional centers of the Japan Environment and Children's Study (mothers: n = 1477, fathers: n = 219). The expected PCB values were estimated from the participants' FFQ answers and medical records (age, body mass index and number of deliveries). Based on the stepwise forward selection results of Bayesian regression models, age and fish and egg consumption were positively associated with PCB concentrations and a number of deliveries were negatively associated with PCB concentrations in mothers, whereas only age was positively associated with PCB concentrations in fathers.These findings indicated that the estimation of daily dietary intake may be useful for the prediction of PCB concentration for mothers.

Uptake and depuration of PCB-153 in edible shrimp Palaemonetes varians and human health risk assessment.

Science.gov (United States)

Grilo, T F; Cardoso, P G; Pato, P; Duarte, A C; Pardal, M A

2014-03-01

A medium-term mesocosm exposure study was conducted to elucidate bioaccumulation and depuration of polychlorinated biphenyl congener 153 (PCB-153) in edible shrimp Palaemonetes varians. Over the 15-day exposure period, shrimp under different exposure concentrations exhibited a significant increase in PCB-153 concentration compared with control organisms. Distinct bioaccumulation patterns and uptake rates were observed depending on the exposure concentrations. For low PCB-153 exposure levels (0.25μgL(-1)), accumulation followed a saturation model, reaching an apparent steady state after fifteen days exposure. For intermediate (2.5μgL(-1)) and high PCB-153 levels (25μgL(-1)), accumulation was faster and linear. In addition, the bioaccumulation rate was not proportional to PCB-153 concentration, and the bioaccumulation was higher at intermediate exposure concentrations. Regarding the depuration phase, P. varians lost up to 30% of PCB-153 after 72h and levels continued slowly to decrease until the end of the 30-d experimental period. However, PCB-153 levels in shrimp did not reach background values, and those exposed to moderate and high PCB-153 concentrations presented contamination levels much higher than the regulatory limit for human food consumption (75ngg(-1) ww for Σ6 PCB). Copyright © 2013 Elsevier Inc. All rights reserved.

Frequency Reconfigurable Circular Patch Antenna with an Arc-Shaped Slot Ground Controlled by PIN Diodes

Directory of Open Access Journals (Sweden)

Yao Chen

2017-01-01

Full Text Available In this paper, a compact frequency reconfigurable circular patch antenna with an arc-shaped slot loaded in the ground layer is proposed for multiband wireless communication applications. By controlling the ON/OFF states of the five PIN diodes mounted on the arc-shaped slot, the effective length of the arc-shaped slot and the effective length of antennas current are changed, and accordingly six-frequency band reconfiguration can be achieved. The simulated and measured results show that the antenna can operate from 1.82 GHz to 2.46 GHz, which is located in DCS1800 (1.71–1.88 GHz, UMTS (2.11–2.20 GHz, WiBro (2.3–2.4 GHz, and Bluetooth (2.4–2.48 GHz frequency bands and so forth. Compared to the common rectangular slot circular patch antenna, the proposed arc-shaped slot circular patch antenna not only has a better rotational symmetry with the circular patch and substrate but also has more compact size. For the given operating frequency at 1.82 GHz, over 55% area reduction is achieved in this design with respect to the common design with rectangular slot. Since the promising frequency reconfiguration, this antenna may have potential applications in modern multiband and multifunctional mobile communication systems.

PCB pollution continues to impact populations of orcas and other dolphins in European waters

Science.gov (United States)

Jepson, Paul D.; Deaville, Rob; Barber, Jonathan L.; Aguilar, Àlex; Borrell, Asunción; Murphy, Sinéad; Barry, Jon; Brownlow, Andrew; Barnett, James; Berrow, Simon; Cunningham, Andrew A.; Davison, Nicholas J.; Ten Doeschate, Mariel; Esteban, Ruth; Ferreira, Marisa; Foote, Andrew D.; Genov, Tilen; Giménez, Joan; Loveridge, Jan; Llavona, Ángela; Martin, Vidal; Maxwell, David L.; Papachlimitzou, Alexandra; Penrose, Rod; Perkins, Matthew W.; Smith, Brian; de Stephanis, Renaud; Tregenza, Nick; Verborgh, Philippe; Fernandez, Antonio; Law, Robin J.

2016-01-01

Organochlorine (OC) pesticides and the more persistent polychlorinated biphenyls (PCBs) have well-established dose-dependent toxicities to birds, fish and mammals in experimental studies, but the actual impact of OC pollutants on European marine top predators remains unknown. Here we show that several cetacean species have very high mean blubber PCB concentrations likely to cause population declines and suppress population recovery. In a large pan-European meta-analysis of stranded (n = 929) or biopsied (n = 152) cetaceans, three out of four species:- striped dolphins (SDs), bottlenose dolphins (BNDs) and killer whales (KWs) had mean PCB levels that markedly exceeded all known marine mammal PCB toxicity thresholds. Some locations (e.g. western Mediterranean Sea, south-west Iberian Peninsula) are global PCB “hotspots” for marine mammals. Blubber PCB concentrations initially declined following a mid-1980s EU ban, but have since stabilised in UK harbour porpoises and SDs in the western Mediterranean Sea. Some small or declining populations of BNDs and KWs in the NE Atlantic were associated with low recruitment, consistent with PCB-induced reproductive toxicity. Despite regulations and mitigation measures to reduce PCB pollution, their biomagnification in marine food webs continues to cause severe impacts among cetacean top predators in European seas.

PCB pollution continues to impact populations of orcas and other dolphins in European waters.

Science.gov (United States)

Jepson, Paul D; Deaville, Rob; Barber, Jonathan L; Aguilar, Àlex; Borrell, Asunción; Murphy, Sinéad; Barry, Jon; Brownlow, Andrew; Barnett, James; Berrow, Simon; Cunningham, Andrew A; Davison, Nicholas J; Ten Doeschate, Mariel; Esteban, Ruth; Ferreira, Marisa; Foote, Andrew D; Genov, Tilen; Giménez, Joan; Loveridge, Jan; Llavona, Ángela; Martin, Vidal; Maxwell, David L; Papachlimitzou, Alexandra; Penrose, Rod; Perkins, Matthew W; Smith, Brian; de Stephanis, Renaud; Tregenza, Nick; Verborgh, Philippe; Fernandez, Antonio; Law, Robin J

2016-01-14

Organochlorine (OC) pesticides and the more persistent polychlorinated biphenyls (PCBs) have well-established dose-dependent toxicities to birds, fish and mammals in experimental studies, but the actual impact of OC pollutants on European marine top predators remains unknown. Here we show that several cetacean species have very high mean blubber PCB concentrations likely to cause population declines and suppress population recovery. In a large pan-European meta-analysis of stranded (n = 929) or biopsied (n = 152) cetaceans, three out of four species:- striped dolphins (SDs), bottlenose dolphins (BNDs) and killer whales (KWs) had mean PCB levels that markedly exceeded all known marine mammal PCB toxicity thresholds. Some locations (e.g. western Mediterranean Sea, south-west Iberian Peninsula) are global PCB "hotspots" for marine mammals. Blubber PCB concentrations initially declined following a mid-1980s EU ban, but have since stabilised in UK harbour porpoises and SDs in the western Mediterranean Sea. Some small or declining populations of BNDs and KWs in the NE Atlantic were associated with low recruitment, consistent with PCB-induced reproductive toxicity. Despite regulations and mitigation measures to reduce PCB pollution, their biomagnification in marine food webs continues to cause severe impacts among cetacean top predators in European seas.

Reconfigurability of behavioural specifications for manufacturing systems

Science.gov (United States)

Schmidt, Klaus Werner

2017-12-01

Reconfigurable manufacturing systems (RMS) support flexibility in the product variety and the configuration of the manufacturing system itself in order to enable quick adjustments to new products and production requirements. As a consequence, an essential feature of RMS is their ability to rapidly modify the control strategy during run-time. In this paper, the particular problem of changing the specified operation of a RMS, whose logical behaviour is modelled as a finite state automaton, is addressed. The notion of reconfigurability of specifications (RoS) is introduced and it is shown that the stated reconfiguration problem can be formulated as a controlled language convergence problem. In addition, algorithms for the verification of RoS and the construction of a reconfiguration supervisor are proposed. The supervisor is realised in a modular way which facilitates the extension by new configurations. Finally, it is shown that a supremal nonblocking and controllable strict subautomaton of the plant automaton that fulfils RoS exists in case RoS is violated for the plant automaton itself and an algorithm for the computation of this strict subautomaton is presented. The developed concepts and results are illustrated by a manufacturing cell example.

A First Step Towards High-Level Cost Models for the Implementation of SDRs on Multiprocessing Reconfigurable Systems

DEFF Research Database (Denmark)

Le Moullec, Yannick

2011-01-01

-In-Progress paper we introduce our set of high-level estimation models for Area-Time costs of applications mapped onto FPGA-based multiprocessing reconfigurable architectures. In particular, we suggest models for static and dynamic implementations, taking various internal and external architectural elements...... into account. We believe that such models could be used for rapidly comparing implementation alternatives at a high level of abstraction and for guiding the designer during the (pre)analysis phase of the design flow for the implementation of e.g. SDR platforms....

Associations between plasma concentrations of PCB 28 and possible indoor exposure sources in Danish school children and mothers.

Science.gov (United States)

Egsmose, Emilie Lund; Bräuner, Elvira Vaclavik; Frederiksen, Marie; Mørck, Thit Aarøe; Siersma, Volkert Dirk; Hansen, Pernille Winton; Nielsen, Flemming; Grandjean, Philippe; Knudsen, Lisbeth E

2016-02-01

Polychlorinated biphenyls (PCBs) are ubiquitously present in the environment and are suspected of carcinogenic, neurotoxic and immunotoxic effects. Significantly higher plasma concentrations of the congener PCB 28 occur in children compared to adults. Exposure in schools may contribute to this difference. To determine whether increased blood plasma concentrations of PCB 28 in Danish school children and mothers are associated with living in homes or attending schools constructed in the PCB period (1959-1977). PCB 28 was analyzed in plasma samples from 116 children aged 6-11years and 143 mothers living in an urban and a rural area in Denmark and participating in the European pilot project DEMOCOPHES (Demonstration of a study to COordinate and Perform Human Biomonitoring on a European Scale). In Denmark, PCBs were used in construction in the period 1950-1977, and year of construction or renovation of the homes and schools was used as a proxy for indoor PCB exposure. Linear regression models were used to assess the association between potential PCB exposure from building materials and lipid adjusted concentrations of PCB 28 in plasma, with and without adjustment for potential confounders. Among the 116 children and 143 mothers, we were able to specify home construction period in all but 4 children and 5 mothers leaving 111 children and 138 mothers for our analyses. The median lipid adjusted plasma PCB 28 concentration was 3 (range: 1-28) ng/g lipid in the children and 2 (range: 1-8) ng/g lipid in the mothers. Children living in homes built in the PCB period had significantly higher lipid adjusted plasma PCB 28 concentrations compared to children living in homes built before or after the PCB period. Following adjustment for covariates, PCB 28 concentrations in children were 40 (95% CI: 13; 68) percent higher than concentrations of children living in homes constructed at other times. Furthermore, children attending schools built or substantially refurbished in the PCB

Optimal production planning for PCB assembly

CERN Document Server

Ho, William

2006-01-01

Focuses on the optimization of the Printed circuit board (PCB) assembly lines' efficiency. This book integrates the component sequencing and the feeder arrangement problems together for the pick-and-place machine and the chip shooter machines.

PCDD, PCDF, and PCB contamination of air and inhalable particulate in Rome

International Nuclear Information System (INIS)

Turrio-Baldassarri, L.; Carere, A.; Di Domenico, A.; Fuselli, S.; Iacovella, N.; Rodriguez, F.

1994-01-01

The isomer specific determination of PCDD, PCDF and PCB was carried out on samples of air and inhalable particulate from Rome. Samples were taken daily for six months and pooled to yield two samples per month. Normal PCDD + PCDF concentrations expressed in TEQ ranged from 48 to 87 fg/m 3 , while total PCB ranged from 0.1 to 1.4 ng/m 3 . The 2, 3, 7, 8-substituted PCDD and PCDF congener pattern is shown together with the PCB congener pattern. (orig.)

2,2',3,3',6,6'-Hexachlorobiphenyl (PCB 136) is Enantioselectively Oxidized to Hydroxylated Metabolites by Rat Liver Microsomes

Science.gov (United States)

Wu, Xianai; Pramanik, Ananya; Duffel, Michael W.; Hrycay, Eugene G.; Bandiera, Stelvio M.; Lehmler, Hans-Joachim; Kania-Korwel, Izabela

2011-01-01

Developmental exposure to multiple-ortho substituted polychlorinated biphenyls (PCBs) causes adverse neurodevelopmental outcomes in laboratory animals and humans by mechanisms involving the sensitization of Ryanodine receptors (RyRs). In the case of PCB 136, the sensitization of RyR is enantiospecific, with only (-)-PCB 136 being active. However, the role of enantioselective metabolism in the developmental neurotoxicity of PCB 136 is poorly understood. The present study employed hepatic microsomes from phenobarbital (PB-), dexamethasone (DEX-) and corn oil (VEH-)treated male Sprague-Dawley rats to investigate the hypothesis that PCB 136 atropisomers are enantioselectively metabolized by P450 enzymes to potentially neurotoxic, hydroxylated PCB 136 metabolites. The results demonstrated the time- and isoform-dependent formation of three metabolites, with 5-OH-PCB 136 (2,2',3,3',6,6'-hexachlorobiphenyl-5-ol) being the major metabolite. The formation of 5-OH-PCB 136 increased with the activity of P450 2B enzymes in the microsomal preparation, which is consistent with PCB 136 metabolism by rat P450 2B1. The minor metabolite 4-OH-PCB 136 (2,2',3,3',6,6'-hexachlorobiphenyl-4-ol) was produced by a currently unidentified P450 enzymes. An enantiomeric enrichment of (-)-PCB 136 was observed in microsomal incubations due to the preferential metabolism of (+)-PCB 136 to the corresponding 5-OH-PCB 136 (2,2',3,3',6,6'-hexachlorobiphenyl-5-ol) atropisomer. 4-OH-PCB 136 displayed an enrichment of the atropisomer formed from (-)-PCB 136; however, the enrichment of this metabolite atropisomer didn't affect the enantiomeric enrichment of the parent PCB because 4-OH-PCB 136 is only a minor metabolite. Although the formation of 5- and 4-OH-PCB 136 atropisomers increased with time, the enantioselective formation of the OH-PCB metabolites resulted in constant enantiomeric enrichment, especially at later incubation times. These observations not only demonstrate that the chiral signatures of

Fasting augments PCB impact on liver metabolism in anadromous Arctic Char

Science.gov (United States)

Vijayan, M.M.; Aluru, N.; Maule, A.G.; Jorgensen, E.H.

2006-01-01

Anadromous arctic char (Salvelinus alpinus) undertake short feeding migrations to seawater every summer and accumulate lipids, while the rest of the year is spent in fresh water where the accumulated lipid reserves are mobilized. We tested the hypothesis that winter fasting and the associated polychlorinated biphenyls' (PCBs) redistribution from lipid depots to critical tissues impair the liver metabolic capacity in these animals. Char were administered Aroclor 1254 (0, 1, 10, and 100 mg/ kg body mass) orally and maintained for 4 months without feeding to mimic seasonal winter fasting, while fed groups (0 and 100 mg Aroclor 1254/kg) were maintained for comparison. A clear dose-related increase in PCB accumulation and cytochrome P4501A (CYP1A) protein content was observed in the livers of fasted fish. This PCB concentration and CYP1A response with the high dose of Aroclor were 1.5-fold and 3-fold greater in the fasted than in the fed fish, respectively. In fed fish, PCB exposure lowered liver glycogen content, whereas none of the other metabolic indicators were significantly affected. In fasted fish, PCB exposure depressed liver glycogen content and activities of glucose-6-phosphate dehydrogenase, alanine aminotransferase, lactate dehydrogenase, and phosphoenolpyruvate carboxykinase and elevated 3-hydroxyacylcoA dehydrogenase activity and glucocorticoid receptor protein expression. There were no significant impacts of PCB on heat shock protein 70 (hsp70) and hsp90 contents in either fed or fasted fish. Collectively, our study demonstrates that winter emaciation associated with the anadromous lifestyle predisposes arctic char to PCB impact on hepatic metabolism including disruption of the adaptive metabolic responses to extended fasting. ?? 2006 Oxford University Press.

Hierarchically assembled DNA origami tubules with reconfigurable chirality

International Nuclear Information System (INIS)

Chen, Haorong; Cha, Tae-Gon; Pan, Jing; Choi, Jong Hyun

2013-01-01

The dynamic reconfiguration of a hierarchically assembled tubular structure is demonstrated using the DNA origami technique. Short cylindrical DNA origami monomers are synthesized and linked into elongated tubules, which can then be disassembled via toehold-mediated strand displacement. The disassembled subunits are subsequently linked into tubules of a different chirality. The reconfiguration is performed with the subunits carrying dumbbell hairpin DNA oligonucleotides or gold nanoparticles (AuNPs). The reconfiguration of higher order origami structures presented here is useful for constructing dynamic nanostructures that exceed the size limit of single DNA origami and may facilitate the study of molecular or particle interactions by tuning their relative distance and organization. (paper)

Pass-band reconfigurable spoof surface plasmon polaritons

Science.gov (United States)

Zhang, Hao Chi; He, Pei Hang; Gao, Xinxin; Tang, Wen Xuan; Cui, Tie Jun

2018-04-01

In this paper, we introduce a new scheme to construct the band-pass tunable filter based on the band-pass reconfigurable spoof surface plasmon polaritons (SPPs), whose cut-off frequencies at both sides of the passband can be tuned through changing the direct current (DC) bias of varactors. Compared to traditional technology (e.g. microstrip filters), the spoof SPP structure can provide more tight field confinement and more significant field enhancement, which is extremely valuable for many system applications. In order to achieve this scheme, we proposed a specially designed SPP filter integrated with varactors and DC bias feeding structure to support the spoof SPP passband reconfiguration. Furthermore, the full-wave simulated result verifies the outstanding performance on both efficiency and reconfiguration, which has the potential to be widely used in advanced intelligent systems.

Individual Polychlorinated Biphenyl (PCB) Congeners Produce Tissue- and Gene-Specific Effects on Thyroid Hormone Signaling during Development

Science.gov (United States)

Giera, Stefanie; Bansal, Ruby; Ortiz-Toro, Theresa M.; Taub, Daniel G.

2011-01-01

Polychlorinated biphenyls (PCB) are industrial chemicals linked to developmental deficits that may be caused in part by disrupting thyroid hormone (TH) action by either reducing serum TH or interacting directly with the TH receptor (TR). Individual PCB congeners can activate the TR in vitro when the metabolic enzyme cytochrome P4501A1 (CYP1A1) is induced, suggesting that specific PCB metabolites act as TR agonists. To test this hypothesis in vivo, we compared two combinations of PCB congeners that either activate the TR (PCB 105 and 118) or not (PCB 138 and 153) in the presence or absence of a PCB congener (PCB 126) that induces CYP1A1 in vitro. Aroclor 1254 was used as a positive control, and a group treated with propylthiouracil was included to characterize the effects of low serum TH. We monitored the effects on TH signaling in several peripheral tissues by measuring the mRNA expression of well-known TH-response genes in these tissues. Aroclor 1254 and its component PCB 105/118/126 reduced total T4 to the same extent as that of propylthiouracil but increased the expression of some TH target genes in liver. This effect was strongly correlated with CYP1A1 expression supporting the hypothesis that metabolism is necessary. Effects were gene and tissue specific, indicating that tissue-specific metabolism is an important component of PCB disruption of TH action and that PCB metabolites interact in complex ways with the TR. These are essential mechanisms to consider when evaluating the health risks of contaminant exposures, for both PCB and other polycyclic compounds known to interact with nuclear hormone receptors. PMID:21540284

PCB concentrations and activity of sea lamprey Petromyzon marinus vary by sex

Science.gov (United States)

Madenjian, Charles P.; Johnson, Nicholas S.; Binder, Thomas R.; Rediske, Richard R.; O'Keefe, James P.

2013-01-01

We determined the polychlorinated biphenyl (PCB) concentrations of 40 male and 40 female adult sea lampreys Petromyzon marinus captured in the Cheboygan River, a tributary to Lake Huron, during May 2011. In addition, we performed a laboratory experiment using passive integrated transponder tags to determine whether male adult sea lampreys were more active than female adult sea lampreys. Sex had a significant effect on PCB concentration, and PCB concentration at a given level of sea lamprey condition was approximately 25 % greater in males than in females. Adjusting for the difference in condition between the sexes, males averaged a 17 % greater PCB concentration compared with females. Results from the laboratory experiment indicated that males were significantly more active than females. The observed sex difference in PCB concentrations was not due to female sea lampreys releasing eggs at spawning because the sea lamprey is semelparous, and we caught the sea lampreys before spawning. Rather, we attributed the sex difference in PCB concentrations to a greater rate of energy expenditure in males compared with females. We proposed that this greater rate of energy expenditure was likely due to greater activity. Our laboratory experiment results supported this hypothesis. A greater resting metabolic rate may also have contributed to a greater rate of energy expenditure. Our findings should eventually be applicable toward improving control of sea lamprey, a pest responsible for considerable damage to fisheries in lakes where it is not native.

NeuroFlow: A General Purpose Spiking Neural Network Simulation Platform using Customizable Processors.

Science.gov (United States)

Cheung, Kit; Schultz, Simon R; Luk, Wayne

2015-01-01

NeuroFlow is a scalable spiking neural network simulation platform for off-the-shelf high performance computing systems using customizable hardware processors such as Field-Programmable Gate Arrays (FPGAs). Unlike multi-core processors and application-specific integrated circuits, the processor architecture of NeuroFlow can be redesigned and reconfigured to suit a particular simulation to deliver optimized performance, such as the degree of parallelism to employ. The compilation process supports using PyNN, a simulator-independent neural network description language, to configure the processor. NeuroFlow supports a number of commonly used current or conductance based neuronal models such as integrate-and-fire and Izhikevich models, and the spike-timing-dependent plasticity (STDP) rule for learning. A 6-FPGA system can simulate a network of up to ~600,000 neurons and can achieve a real-time performance of 400,000 neurons. Using one FPGA, NeuroFlow delivers a speedup of up to 33.6 times the speed of an 8-core processor, or 2.83 times the speed of GPU-based platforms. With high flexibility and throughput, NeuroFlow provides a viable environment for large-scale neural network simulation.

77 FR 11533 - Anniston PCB Superfund Site, Anniston, Calhoun County, Alabama; Notice of Amended Settlement

Science.gov (United States)

2012-02-27

... ENVIRONMENTAL PROTECTION AGENCY [CERCLA-04-2012-3763; FRL 9637-7] Anniston PCB Superfund Site... past response costs concerning the Anniston PCB Superfund Site located in Anniston, Calhoun County.... Submit your comments by Site name Anniston PCB by one of the following methods: www.epa.gov/region4...

Short-Term Load Forecasting-Based Automatic Distribution Network Reconfiguration

Energy Technology Data Exchange (ETDEWEB)

Jiang, Huaiguang [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ding, Fei [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yingchen [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-08-23

In a traditional dynamic network reconfiguration study, the optimal topology is determined at every scheduled time point by using the real load data measured at that time. The development of the load forecasting technique can provide an accurate prediction of the load power that will happen in a future time and provide more information about load changes. With the inclusion of load forecasting, the optimal topology can be determined based on the predicted load conditions during a longer time period instead of using a snapshot of the load at the time when the reconfiguration happens; thus, the distribution system operator can use this information to better operate the system reconfiguration and achieve optimal solutions. This paper proposes a short-term load forecasting approach to automatically reconfigure distribution systems in a dynamic and pre-event manner. Specifically, a short-term and high-resolution distribution system load forecasting approach is proposed with a forecaster based on support vector regression and parallel parameters optimization. The network reconfiguration problem is solved by using the forecasted load continuously to determine the optimal network topology with the minimum amount of loss at the future time. The simulation results validate and evaluate the proposed approach.

Reconfigurable Sensor Monitoring System

Science.gov (United States)

Alhorn, Dean C. (Inventor); Dutton, Kenneth R. (Inventor); Howard, David E. (Inventor); Smith, Dennis A. (Inventor)

2017-01-01

A reconfigurable sensor monitoring system includes software tunable filters, each of which is programmable to condition one type of analog signal. A processor coupled to the software tunable filters receives each type of analog signal so-conditioned.

Insight in the PCB-degrading functional community in long-term contaminated soil under bioremediation

Energy Technology Data Exchange (ETDEWEB)

Petric, Ines; Hrsak, Dubravka; Udikovic-Kolic, Nikolina [Ruder Boskovic Inst., Division for Marine and Environmental Research, Zagreb (Croatia); Fingler, Sanja [Inst. for Medical Research and Occupational Health, Zagreb (Croatia); Bru, David; Martin-Laurent, Fabrice [INRA, Univ. der Bourgogne, Soil and Environmental Microbiology, Dijon (France)

2011-02-15

A small-scale bioremediation assay was developed in order to get insight into the functioning of a polychlorinated biphenyl (PCB) degrading community during the time course of bioremediation treatment of a contaminated soil. The study was conducted with the aim to better understand the key mechanisms involved in PCB-removal from soils. Materials and methods Two bioremediation strategies were applied in the assay: (a) biostimulation (addition of carvone as inducer of biphenyl pathway, soya lecithin for improving PCB bioavailability, and xylose as supplemental carbon source) and (b) bioaugmentation with selected seed cultures TSZ7 or Rhodococcus sp. Z6 originating from the transformer station soil and showing substantial PCB-degrading activity. Functional PCB-degrading community was investigated by using molecular-based approaches (sequencing, qPCR) targeting bphA and bphC genes, coding key enzymes of the upper biphenyl pathway, in soil DNA extracts. In addition, kinetics of PCBs removal during the bioremediation treatment was determined using gas chromatography mass spectrometry analyses. Results and discussion bphA-based phylogeny revealed that bioremediation affected the structure of the PCB-degrading community in soils, with Rhodococcus-like bacterial populations developing as dominant members. Tracking of this population further indicated that applied bioremediation treatments led to its enrichment within the PCB-degrading community. The abundance of the PCB-degrading community, estimated by quantifying the copy number of bphA and bphC genes, revealed that it represented up to 0.3% of the total bacterial community. All bioremediation treatments were shown to enhance PCB reduction in soils, with approximately 40% of total PCBs being removed during a 1-year period. The faster PCB reduction achieved in bioaugmented soils suggested an important role of the seed cultures in bioremediation processes. Conclusions The PCBs degrading community was modified in response to

Life Cycle Analysis for Treatment and Disposal of PCB Waste at Ashtabula and Fernald

International Nuclear Information System (INIS)

Morris, M.I.

2001-01-01

This report presents the use of the life cycle analysis (LCA) system developed at Oak Ridge National Laboratory (ORNL) to assist two U.S. Department of Energy (DOE) sites in Ohio--the Ashtabula Environmental Management Project near Cleveland and the Fernald Environmental Management Project near Cincinnati--in assessing treatment and disposal options for polychlorinated biphenyl (PCB)-contaminated low-level radioactive waste (LLW) and mixed waste. We will examine, first, how the LCA process works, then look briefly at the LCA system's ''toolbox,'' and finally, see how the process was applied in analyzing the options available in Ohio. As DOE nuclear weapons facilities carry out planned decontamination and decommissioning (D and D) activities for site closure and progressively package waste streams, remove buildings, and clean up other structures that have served as temporary waste storage locations, it becomes paramount for each waste stream to have a prescribed and proven outlet for disposition. Some of the most problematic waste streams throughout the DOE complex are PCB low-level radioactive wastes (liquid and solid) and PCB low-level Resource Conservation and Recovery Act (RCRA) liquid and solid wastes. Several DOE Ohio Field Office (OH) sites have PCB disposition needs that could have an impact on the critical path of the decommissioning work of these closure sites. The Ashtabula Environmental Management Project (AEMP), an OH closure site, has an urgent problem with disposition of soils contaminated by PCB and low-level waste at the edge of the site. The Fernald Environmental Management Project (FEMP), another OH closure site, has difficulties in timely disposition of its PCB-low-level sludges and its PCB low-level RCRA sludges in order to avoid impacting the critical path of its D and D activities. Evaluation of options for these waste streams is the subject of this report. In the past a few alternatives for disposition of PCB low-level waste and PCB low

Life Cycle Analysis for Treatment and Disposal of PCB Waste at Ashtabula and Fernald

Energy Technology Data Exchange (ETDEWEB)

Morris, M.I.

2001-01-11

This report presents the use of the life cycle analysis (LCA) system developed at Oak Ridge National Laboratory (ORNL) to assist two U.S. Department of Energy (DOE) sites in Ohio--the Ashtabula Environmental Management Project near Cleveland and the Fernald Environmental Management Project near Cincinnati--in assessing treatment and disposal options for polychlorinated biphenyl (PCB)-contaminated low-level radioactive waste (LLW) and mixed waste. We will examine, first, how the LCA process works, then look briefly at the LCA system's ''toolbox,'' and finally, see how the process was applied in analyzing the options available in Ohio. As DOE nuclear weapons facilities carry out planned decontamination and decommissioning (D&D) activities for site closure and progressively package waste streams, remove buildings, and clean up other structures that have served as temporary waste storage locations, it becomes paramount for each waste stream to have a prescribed and proven outlet for disposition. Some of the most problematic waste streams throughout the DOE complex are PCB low-level radioactive wastes (liquid and solid) and PCB low-level Resource Conservation and Recovery Act (RCRA) liquid and solid wastes. Several DOE Ohio Field Office (OH) sites have PCB disposition needs that could have an impact on the critical path of the decommissioning work of these closure sites. The Ashtabula Environmental Management Project (AEMP), an OH closure site, has an urgent problem with disposition of soils contaminated by PCB and low-level waste at the edge of the site. The Fernald Environmental Management Project (FEMP), another OH closure site, has difficulties in timely disposition of its PCB-low-level sludges and its PCB low-level RCRA sludges in order to avoid impacting the critical path of its D&D activities. Evaluation of options for these waste streams is the subject of this report. In the past a few alternatives for disposition of PCB low-level waste

Dynamic Reconfiguration in Real-Time Systems Energy, Performance, and Thermal Perspectives

CERN Document Server

Wang, Weixun; Ranka, Sanjay

2013-01-01

Given the widespread use of real-time multitasking systems, there are tremendous optimization opportunities if reconfigurable computing can be effectively incorporated while maintaining performance and other design constraints of typical applications. The focus of this book is to describe the dynamic reconfiguration techniques that can be safely used in real-time systems. This book provides comprehensive approaches by considering synergistic effects of computation, communication as well as storage together to significantly improve overall performance, power, energy and temperature.  Provides a comprehensive introduction to optimization and dynamic reconfiguration techniques in real-time embedded systems; Covers state-of-the-art techniques and ongoing research in reconfigurable architectures; Focuses on algorithms tuned for dynamic reconfiguration techniques in real-time systems;  Provides reference for anyone designing low-power systems, energy-/temperature-constrained devices, and power-performance efficie...

Glenn Reconfigurable User-interface and Virtual reality Exploration (GURVE) Laboratory

Data.gov (United States)

Federal Laboratory Consortium — The GRUVE (Glenn Reconfigurable User-interface and Virtual reality Exploration) Lab is a reconfigurable, large screen display facility at Nasa Glenn Research Center....

Reconfigurable Model Execution in the OpenMDAO Framework

Science.gov (United States)

Hwang, John T.

2017-01-01

NASA's OpenMDAO framework facilitates constructing complex models and computing their derivatives for multidisciplinary design optimization. Decomposing a model into components that follow a prescribed interface enables OpenMDAO to assemble multidisciplinary derivatives from the component derivatives using what amounts to the adjoint method, direct method, chain rule, global sensitivity equations, or any combination thereof, using the MAUD architecture. OpenMDAO also handles the distribution of processors among the disciplines by hierarchically grouping the components, and it automates the data transfer between components that are on different processors. These features have made OpenMDAO useful for applications in aircraft design, satellite design, wind turbine design, and aircraft engine design, among others. This paper presents new algorithms for OpenMDAO that enable reconfigurable model execution. This concept refers to dynamically changing, during execution, one or more of: the variable sizes, solution algorithm, parallel load balancing, or set of variables-i.e., adding and removing components, perhaps to switch to a higher-fidelity sub-model. Any component can reconfigure at any point, even when running in parallel with other components, and the reconfiguration algorithm presented here performs the synchronized updates to all other components that are affected. A reconfigurable software framework for multidisciplinary design optimization enables new adaptive solvers, adaptive parallelization, and new applications such as gradient-based optimization with overset flow solvers and adaptive mesh refinement. Benchmarking results demonstrate the time savings for reconfiguration compared to setting up the model again from scratch, which can be significant in large-scale problems. Additionally, the new reconfigurability feature is applied to a mission profile optimization problem for commercial aircraft where both the parametrization of the mission profile and the

Loop overhead reduction techniques for coarse grained reconfigurable architectures

NARCIS (Netherlands)

Vadivel, K.; Wijtvliet, M.; Jordans, R.; Corporaal, H.

2017-01-01

Due to their flexibility and high performance, Coarse Grained Reconfigurable Array (CGRA) are a topic of increasing research interest. However, CGRAs also have the potential to achieve very high energy efficiency in comparison to other reconfigurable architectures when hardware optimizations are

Kwantificatie van PCB-componenten in krachtvoeders

NARCIS (Netherlands)

Mazijk, van R.J.; Munsteren, van A.J.; Tuinstra, L.G.M.Th.

1981-01-01

Met behulp van individuele chloorbifenylstandaarden is het PCB-gehalte van een aantal krachtvoeders bepaald, waarbij voor de onbekende componenten een geschatte waarde is gebruikt. Uit deze gehalten is met behulp van omrekeningsfactoren de theoretische DCB-opbrengst bij perchloreren berekend. Dit

PCB transformer fires: the risk in nuclear power plants

International Nuclear Information System (INIS)

Blackmon, K.

1988-01-01

It is estimated that 1/2 of the present nuclear power plants operate with PCB-filled transformer equipment. In an attempt to obtain better estimates of clean-up costs in a nuclear power plant under reasonable-loss scenarios, a study was commissioned. This study was a joint venture between Blackmon-Mooring Steamatic Technologies, Inc., (BMS-TECH) and M and M Protection Consultants. This joint study was conducted at a typical pressurized-water reactor plant consisting of two 1000-MW units. Three specific scenarios were selected and analyzed for this typical power plant. These scenarios were: (1) an electrical failure of a transformer in an isolated switch gear room; (2) a transformer exposed to a 55-gallon transient combustion oil fire in the auxiliary building; and (3) a PCB transformer involved in a major turbine lube fire in the turbine building. Based on results of this study, the insurance carriers for this industry implemented an adjustment in their rate structures for nuclear power plants that have PCB equipment

Effects of DDE and PCB (Aroclor 1260) on experimentally poisoned little brown bats (Myotis lucifugus): Lethal brain concentrations

Science.gov (United States)

Clark, D.R.; Stafford, C.J.

1981-01-01

Adult female little brown bats (Myotis lucifugus) were collected in a church attic in North East, Cecil County, Md. Mealworms (Tenebrio molitor) containing organochlorine pollutants were fed to the bats as follows: 5 bats were dosed at 480 ppm DDE, 12 at 150 ppm DDE, 5 at 1000 ppm polychlorinated biphenyl (PCB; Aroclor 1260), and 12 at 15 ppm PCB. Seven other bats were fed untreated mealworms. The objective was to elevate brain levels of DDE and PCB to lethality and measure these concentrations. During 40 d of dosage, one DDE-dosed bat and two PCB-dosed bats died after exhibiting the prolonged tremor that characterizes organochlorine poisoning. After dosage, surviving bats were starved to elevate brain levels of toxicants, and three additional DDE-dosed bats had tremors before dying. The mean brain concentration of DDE diagnostic of death was estimated as 603 ppm, range 540-670 ppm. This mean is 16-18% higher than means for Mexican free-tailed bats (Tadarida brasiliensis) and common grackles (Quiscalus quiscula), and may indicate less sensitivity. Lethal brain concentrations of Aroclor 1260 were 1300 and 1500 ppm. Such values appear to be higher than values (Aroclor 1254) for brown-headed cowbirds (Molothrus ater). During starvation, DDE-dosed bats lost weight about 24% faster than controls. If smaller amounts of stored DDE cause increases in metabolic rates of nonfeeding bats, as during hibernation or migration, the result could be premature energy depletion and increased mortality.

Polychlorinated biphenyl (PCB) load, lipid reserves and biotransformation activity in migrating Atlantic salmon from River Moerrum, Sweden

International Nuclear Information System (INIS)

Hansson, Maria C.; Persson, Maria E.; Larsson, Per; Schantz, Torbjoern von

2009-01-01

Atlantic salmon accumulate high levels of contaminants such as polychlorinated biphenyls (PCBs) in their lipids during the adult growth phase spent at sea. The lipids are later utilized during migration for swimming and biological adaptations. We hypothesize that migrating salmons' biotransformation processes are affected by the high levels of built-up PCBs compared to salmon that in a pre-migrational stage. For these analyses we sampled adult Atlantic salmon during migration in the Swedish River Moerrum and measured the 21 most common PCB congeners (ΣPCB) and lipid levels in muscle tissue, aryl hydrocarbon receptor (AHR2) and cytochrome P4501A1 (CYP1A1) transcript levels as well as ethoxyresorufin-O-deethylase activity (EROD) in liver. We also determined which AHR2 genotypes the salmon carried. We show that EROD activity is correlated to CYP1A1 level but not to ΣPCB concentration. ΣPCB concentration does not predict levels of neither the AHR2 nor CYP1A1 genes. We find no associations between specific AHR2 transcription levels and AHR2 genotypes or a correlation between AHR2 and CYP1A1 transcription levels, which is in direct contrast to pre-migrational adult salmon from the Baltic Sea. When we compare River Moerrum to salmon we have previously sampled in the Baltic Sea we show that migrating salmon have significantly lower lipid levels in their muscles; higher muscle concentrations of ΣPCB on a lipid basis; and significantly lower CYP1A1 and EROD levels compared to salmon from the Baltic Sea. Also, transcript levels of three out of four AHR2 genes are significantly different. In conclusion, migrating Swedish Atlantic salmon carry higher concentrations of PCBs in their lipids compared to salmon in the Baltic Sea, but have lower activation of biotransformation genes and enzymes. Our results indicate that accumulated pollutants from the Baltic Sea are deactivated inside the migrating salmon's lipid tissues and increase in concentration when migration is initiated

Ethical sharing of health data in online platforms – which values should be considered?

DEFF Research Database (Denmark)

Riso, Brigida; Tupasela, Aaro Mikael; Vears, Danya

2017-01-01

Intensified and extensive data production and data storage are characteristics of contemporary western societies. Health data sharing is increasing with the growth of Information and Communication Technology (ICT) platforms devoted to the collection of personal health and genomic data. However...... and Ethical perspectives’ (IS 1303) identified six core values they considered to be essential for the ethical sharing of health data using ICT platforms. We believe that using this ethical framework will promote respectful scientific practices in order to maintain individuals’ trust in research. We use...... these values to analyse five ICT platforms and explore how emerging data sharing platforms are reconfiguring the data sharing experience from a range of perspectives. We discuss which types of values, rights and responsibilities they entail and enshrine within their philosophy or outlook on what it means...

Association of plasma PCB levels and HbA1c concentration in Iran.

Science.gov (United States)

Eftekhari, Sahar; Aminian, Omid; Moinfar, Zeinab; Schettgen, Thomas; Kaifie, Andrea; Felten, Michael; Kraus, Thomas; Esser, André

2018-01-01

The rapid increase in prevalence of diabetes mellitus over the last decades warrants more attention to the effects of environmental and occupational exposures on glucose metabolism. Our study aimed to assess the association between the plasma levels of various congeners of polychlorinated biphenyls (PCBs) and the serum concentration of glycated haemoglobin (HbA1c). Our study population consisted of 140 Iranian adults from seven different occupational groups and a group of non-occupationally exposed female participants. The plasma concentration of PCBs were determined at the laboratory of occupational toxicology at RWTH Aachen University, Germany. We considered an HbA1c concentration of 5.7% and more as indicating a disturbed glucose metabolism. Logistic regression was used to assess the association between quartiles of concentrations of PCB congeners and serum HbA1c. Participants with an increased HbA1c value had higher plasma levels of PCB 138, 153, 180 and the PCB sum, although this association was statistically not significant. There was no significant difference between the levels of PCB 138, 153, 180, the sum of these congeners, and PCB 118 in their quartiles when comparing with HbA1c concentrations. For our cohort, we could not demonstrate a significant association between PCB and HbA1c concentrations indicating a disturbance of glucose metabolism.

PCB 126 toxicity is modulated by cross-talk between caveolae and Nrf2 signaling

Energy Technology Data Exchange (ETDEWEB)

Petriello, Michael C. [Graduate Center for Toxicology, College of Medicine, University of Kentucky, Lexington, KY 40536 (United States); University of Kentucky Superfund Research Center, Lexington, KY 40536 (United States); Han, Sung Gu [University of Kentucky Superfund Research Center, Lexington, KY 40536 (United States); Department of Food Science and Biotechnology of Animal Resources, College of Animal Bioscience and Technology, Konkuk University, Seoul 143-701 (Korea, Republic of); Newsome, Bradley J. [University of Kentucky Superfund Research Center, Lexington, KY 40536 (United States); Department of Chemistry, College of Arts and Sciences, University of Kentucky, Lexington, KY 40506 (United States); Hennig, Bernhard [Graduate Center for Toxicology, College of Medicine, University of Kentucky, Lexington, KY 40536 (United States); University of Kentucky Superfund Research Center, Lexington, KY 40536 (United States); Department of Animal and Food Sciences, College of Agriculture, Food and Environment, University of Kentucky, KY 40506 (United States)

2014-06-01

Environmental toxicants such as polychlorinated biphenyls (PCBs) have been implicated in the promotion of multiple inflammatory disorders including cardiovascular disease, but information regarding mechanisms of toxicity and cross-talk between relevant cell signaling pathways is lacking. To examine the hypothesis that cross-talk between membrane domains called caveolae and nuclear factor (erythroid-derived 2)-like 2 (Nrf2) pathways alters PCB-induced inflammation, caveolin-1 was silenced in vascular endothelial cells, resulting in a decreased PCB-induced inflammatory response. Cav-1 silencing (siRNA treatment) also increased levels of Nrf2-ARE transcriptional binding, resulting in higher mRNA levels of the antioxidant genes glutathione s-transferase and NADPH dehydrogenase quinone-1 in both vehicle and PCB-treated systems. Along with this upregulated antioxidant response, Cav-1 siRNA treated cells exhibited decreased mRNA levels of the Nrf2 inhibitory protein Keap1 in both vehicle and PCB-treated samples. Silencing Cav-1 also decreased protein levels of Nrf2 inhibitory proteins Keap1 and Fyn kinase, especially in PCB-treated cells. Further, endothelial cells from wildtype and Cav-1 −/− mice were isolated and treated with PCB to better elucidate the role of functional caveolae in PCB-induced endothelial inflammation. Cav-1 −/− endothelial cells were protected from PCB-induced cellular dysfunction as evidenced by decreased vascular cell adhesion molecule (VCAM-1) protein induction. Compared to wildtype cells, Cav-1 −/− endothelial cells also allowed for a more effective antioxidant response, as observed by higher levels of the antioxidant genes. These data demonstrate novel cross-talk mechanisms between Cav-1 and Nrf2 and implicate the reduction of Cav-1 as a protective mechanism for PCB-induced cellular dysfunction and inflammation. - Highlights: • Reduction of caveolin-1 protein protects against polychlorinated biphenyl toxicity. • Decreasing

Contrasting PCB bioaccumulation patterns among Lake Huron lake trout reflect basin-specific ecology.

Science.gov (United States)

Paterson, Gordon; Ryder, Mark; Drouillard, Ken G; Haffner, G Douglas

2016-01-01

This study collected multiple age classes of lake trout from Lake Huron's Main Basin, Georgian Bay, and North Channel regions to compare and contrast top predator polychlorinated biphenyl (PCB) bioaccumulation patterns in separate compartments of the same ecosystem. Sum PCB concentrations were highest for Main Basin (260 ± 24.9 ng g(-1) wet wt) fish, followed by Georgian Bay (74.6 ± 16.2 ng g(-1) ) and North Channel (42.0 ± 3.3 ng g(-1)) fish. Discriminant functions analysis of lake trout PCB profiles and stable carbon (δ(13)C) and nitrogen (δ(15)N) isotope values clearly distinguished fish by location, indicating high degrees of basin fidelity throughout their lifetimes in addition to highly contrasting PCB bioaccumulation profiles. These unique profiles were not attributable to significant differences in lake trout lipid contents (p = 0.856) or trophic position (δ(15)N; p = 0.334), with rainbow smelt representing the primary prey across the basins. Furthermore, significant differences were observed among the basins for the relationships between PCB biomagnification factors and hydrophobicity. An empirical model for predicting PCB biomagnification in Lake Huron lake trout indicated that basin-specific population growth rates and prey abundances were significant for explaining these contrasting patterns of PCB bioaccumulation. The results of the present study are fundamental for understanding the role of ecology in legacy persistent organic pollutant (POP) bioaccumulation. Specifically, ecosystem characteristics such as prey abundances, foraging ecology, and ultimately consumer growth can regulate the variability of legacy POP bioaccumulation as observed within and among a wide range of freshwater ecosystems. © 2015 SETAC.

Tunable Microwave Component Technologies for SatCom-Platforms

Science.gov (United States)

Maune, Holger; Jost, Matthias; Wiens, Alex; Weickhmann, Christian; Reese, Roland; Nikfalazar, Mohammad; Schuster, Christian; Franke, Tobias; Hu, Wenjuan; Nickel, Matthias; Kienemund, Daniel; Prasetiadi, Ananto Eka; Jakoby, Rolf

2017-03-01

Modern communication platforms require a huge amount of switched RF component banks especially made of different filters and antennas to cover all operating frequencies and bandwidth for the targeted services and application scenarios. In contrast, reconfigurable devices made of tunable components lead to a considerable reduction in complexity, size, weight, power consumption, and cost. This paper gives an overview of suitable technologies for tunable microwave components especially for SatCom applications. Special attention is given to tunable components based on functional materials such as barium strontium titanate (BST) and liquid crystal (LC).

Fable: Design of a Modular Robotic Playware Platform

DEFF Research Database (Denmark)

Pacheco, Moises; Moghadam, Mikael; Magnússon, Arnþór

2013-01-01

-based system composed of reconfigurable heterogeneous modules with a reliable and scalable connector. Furthermore, this paper describes tests where the connector design is tested with children, and presents examples of a moving snake and a quadruped robot, as well as an interactive upper humanoid torso.......We are developing the Fable modular robotic system as a playware platform that will enable non-expert users to develop robots ranging from advanced robotic toys to robotic solutions to problems encountered in their daily lives. This paper presents the mechanical design of Fable: a chain...

HoneyComb: An Application-Driven Online Adaptive Reconfigurable Hardware Architecture

Directory of Open Access Journals (Sweden)

Alexander Thomas

2012-01-01

Full Text Available Since the introduction of the first reconfigurable devices in 1985 the field of reconfigurable computing developed a broad variety of architectures from fine-grained to coarse-grained types. However, the main disadvantages of the reconfigurable approaches, the costs in area, and power consumption, are still present. This contribution presents a solution for application-driven adaptation of our reconfigurable architecture at register transfer level (RTL to reduce the resource requirements and power consumption while keeping the flexibility and performance for a predefined set of applications. Furthermore, implemented runtime adaptive features like online routing and configuration sequencing will be presented and discussed. A presentation of the prototype chip of this architecture designed in 90 nm standard cell technology manufactured by TSMC will conclude this contribution.

2,2′,3,5′,6-PENTACHLOROBIPHENYL (PCB 95) AND ITS HYDROXYLATED METABOLITES ARE ENANTIOMERICALLY ENRICHED IN FEMALE MICE

Science.gov (United States)

Kania-Korwel, Izabela; Barnhart, Christopher D.; Stamou, Marianna; Truong, Kim M.; El-Komy, Mohammed H.M.E.; Lein, Pamela J.; Veng-Pedersen, Peter; Lehmler, Hans-Joachim

2012-01-01

Epidemiological and laboratory studies link polychlorinated biphenyls and their metabolites to adverse neurodevelopmental outcomes. Several neurotoxic PCB congeners are chiral and undergo enantiomeric enrichment in mammalian species, which may modulate PCB developmental neurotoxicity. This study measures levels and enantiomeric enrichment of PCB 95 and its hydroxylated metabolites (OH-PCBs) in adult female C57Bl/6 mice following subchronic exposure to racemic PCB 95. Tissue levels of PCB 95 and OH-PCBs increased with increasing dose. Dose-dependent enantiomeric enrichment of PCB 95 was observed in brain and other tissues. OH-PCBs also displayed enantiomeric enrichment in blood and liver, but were not detected in adipose and brain. In light of data suggesting enantioselective effects of chiral PCBs on molecular targets linked to PCB developmental neurotoxicity, our observations highlight the importance of accounting for PCB and OH-PCB enantiomeric enrichment in the assessment of PCB developmental neurotoxicity. PMID:22974126

PCB congener concentrations in a municipal sewer system in New Jersey, USA

Energy Technology Data Exchange (ETDEWEB)

Loganathan, B. [Murray State Univ., Murray, KY (United States); Botts, J.A. [Aquatic Sciences Consulting, Woodbine, MD (United States); Spadone, J.; McKenna, B. [Linden Roselle Sewerage Authority, Linden, NJ (United States); Sajwan, K.S. [Savannah State Univ., Savannah, GA (United States)

2005-07-01

This paper provided details of a water sampling pilot study conducted in the Linden Roselle Sewerage Authority (LRSA) region in New Jersey. The pilot study was conducted as part of a polychlorinated biphenyl (PCB) monitoring program. Total PCB concentrations in whole water samples in both dissolved and particulate phases were collected at selected locations in the LRSA. PCB loading estimates for dry weather were also provided. Automatic composite sampler equipped with peristaltic pump mechanisms were used to collect the samples in a series of 4 rounds. Sample extracts were then purified and analyzed using a gas chromatograph electron capture detector (GC-ECD). Results showed that in dry weather, total PCBs were between 2.6 to 6.0-fold higher in the western sampling area than in the Roselle Flue, which received sewage flows from residential and commercial sources in the northwest area of the LRSA. Wet weather samples showed only slightly higher total PCBs. Data indicated a source of PCBs in the western portion of the sewershed. In dry weather, higher PCB levels were found in the whole primary influent samples. It was concluded that increased PCB levels were attributed to grit and sludge processing waste streams within a waste water treatment plant. 8 refs., 2 tabs.

Occurrence of PCDD/F, PCB, PBDE, PFAS, and organotin compounds in fish meal, fish oil and fish feed.

Science.gov (United States)

Suominen, K; Hallikainen, A; Ruokojärvi, P; Airaksinen, R; Koponen, J; Rannikko, R; Kiviranta, H

2011-10-01

We analysed polychlorinated dibenzo-p-dioxins and furans (PCDD/F, dioxins), and polychlorinated biphenyls (PCB) in 13 fish meal, five fish oil, and seven fish feed samples. Polybrominated diphenyl ethers (PBDE), organotin compounds (OTC), and perfluoroalkylated substances (PFAS) were analysed in ten fish meal, two fish oil, and two fish feed samples. All measured TEQ concentrations of PCDD/F and PCB were below the maximum levels set by Directive 2002/32/EC. There was no correlation between concentrations of WHOPCDD/F-TEQ and indicator PCB in our samples. The most common congeners among PBDEs were BDE-47 and BDE-100. BDE-209 was present in five fish meals of the ten analysed. Tributyltin (TBT) was the predominant congener in all samples except in three fish meals, where monobutyltin (MBT) was the major congener. Perfluorooctane sulphonate (PFOS) was the predominant congener in six fish meals of the ten analysed. There was large variation in concentrations and congener distributions of the studied compounds between our samples. Our results underline a need to pay special attention to the origin and purity of feed raw material of marine origin. Copyright © 2011 Elsevier Ltd. All rights reserved.

Optically controlled reconfigurable antenna for 5G future broadband cellular communication networks

DEFF Research Database (Denmark)

Costa, I.F. da; Spadoti, D. H.; Cerqueira Sodre Jr., Arismar

2017-01-01

This paper presents an optically controlled reconfigurable antenna for millimetre-wave frequency range. Silicon switches are used to control the optical reconfiguration, modifying the frequency response and radiation pattern of the antenna design. Therefore, the system can switch between the ligh......This paper presents an optically controlled reconfigurable antenna for millimetre-wave frequency range. Silicon switches are used to control the optical reconfiguration, modifying the frequency response and radiation pattern of the antenna design. Therefore, the system can switch between...

REVEAL: Software Documentation and Platform Migration

Science.gov (United States)

Wilson, Michael A.; Veibell, Victoir T.; Freudinger, Lawrence C.

2008-01-01

The Research Environment for Vehicle Embedded Analysis on Linux (REVEAL) is reconfigurable data acquisition software designed for network-distributed test and measurement applications. In development since 2001, it has been successfully demonstrated in support of a number of actual missions within NASA s Suborbital Science Program. Improvements to software configuration control were needed to properly support both an ongoing transition to operational status and continued evolution of REVEAL capabilities. For this reason the project described in this report targets REVEAL software source documentation and deployment of the software on a small set of hardware platforms different from what is currently used in the baseline system implementation. This report specifically describes the actions taken over a ten week period by two undergraduate student interns and serves as a final report for that internship. The topics discussed include: the documentation of REVEAL source code; the migration of REVEAL to other platforms; and an end-to-end field test that successfully validates the efforts.

Reconfigurable antennas radiations using plasma Faraday cage

OpenAIRE

Barro , Oumar Alassane; Himdi , Mohamed; Lafond , Olivier

2015-01-01

International audience; This letter presents a new reconfigurable plasma antenna associated with a Faraday cage. The Faraday cage is realized using a fluorescent lamp. A patch antenna with a broadside radiation pattern or a monopole antenna with an end-fire radiation pattern , operating at 2.45 GHz, is placed inside Faraday cage. The performance of the reconfigurable system is observed in terms of input reflection coefficient, gain and radiation pattern via simulation and measurement. It is s...

Prenatal and postnatal serum PCB concentrations and cochlear function in children at 45 months of age.

Science.gov (United States)

Jusko, Todd A; Sisto, Renata; Iosif, Ana-Maria; Moleti, Arturo; Wimmerová, Sonˇa; Lancz, Kinga; Tihányi, Juraj; Sovčiková, Eva; Drobná, Beata; Palkovičová, L'ubica; Jurečková, Dana; Thevenet-Morrison, Kelly; Verner, Marc-André; Sonneborn, Dean; Hertz-Picciotto, Irva; Trnovec, Tomáš

2014-11-01

Some experimental and human data suggest that exposure to polychlorinated biphenyls (PCBs) may induce ototoxicity, though results of previous epidemiologic studies are mixed and generally focus on either prenatal or postnatal PCB concentrations exclusively. Our aim was to evaluate the association between pre- and postnatal PCB concentrations in relation to cochlear status, assessed by distortion product otoacoustic emissions (DPOAEs), and to further clarify the critical periods in development where cochlear status may be most susceptible to PCBs. A total of 351 children from a birth cohort in eastern Slovakia underwent otoacoustic testing at 45 months of age. Maternal pregnancy, cord, and child 6-, 16-, and 45-month blood samples were collected and analyzed for PCB concentrations. At 45 months of age, DPOAEs were assessed at 11 frequencies in both ears. Multivariate, generalized linear models were used to estimate the associations between PCB concentrations at different ages and DPOAEs, adjusting for potential confounders. Maternal and cord PCB-153 concentrations were not associated with DPOAEs at 45 months. Higher postnatal PCB concentrations at 6-, 16-, and 45-months of age were associated with lower (poorer) DPOAE amplitudes. When all postnatal PCB exposures were considered as an area-under-the-curve metric, an increase in PCB-153 concentration from the 25th to the 75th percentile was associated with a 1.6-dB SPL (sound pressure level) decrease in DPOAE amplitude (95% CI: -2.6, -0.5; p = 0.003). In this study, postnatal rather than maternal or cord PCB concentrations were associated with poorer performance on otoacoustic tests at age 45 months.

Terrain Adaptive Reconfiguration of Mobility

Data.gov (United States)

National Aeronautics and Space Administration — Develop an algorithm (and software) to automatically adapt a reconfigurable robot to different types of terrains for improved mobility, that compared to SOA:...

Current data on the background burden to the persistent organochlorine pollutants HCB, p,p'-DDE as well as PCB 138, PCB 153 and PCB 180 in plasma of the general population in Germany.

Science.gov (United States)

Schettgen, Thomas; Alt, Anne; Esser, Andre; Kraus, Thomas

2015-06-01

Despite their long-term ban, persistent organochlorine compounds like hexachlorobenzene (HCB), p,p'-dichlorodiphenylethylene (DDE) as well as polychlorinated biphenyls (PCBs) are still of environmental concern. For the evaluation of potential occupational or environmental exposures to these substances, it is essential to know the current background burden of the general population. As representative and up-to-date information is missing for Germany, we have analysed a large dataset generated in studies on potential exposure to lower chlorinated PCBs to fill this gap for the levels of HCB, DDE as well as PCB 138, PCB 153 and PCB 180. We have investigated n=2750 plasma samples of persons of the general population living in North Rhine-Westfalia and Hesse aged 6-65 years and sampled between September 2010 and March 2014. For evaluation of the age-dependent accumulation in the general population we have generated seven age groups in the collective. Our laboratory used a validated and quality controlled procedure using GC/MS for quantification of the organochlorine compounds in plasma (LOQ: 0.01μg/L). The median (95th percentile) levels for ∑ PCB 138+PCB 153+PCB 180 were 0.14 (0.73); 0.30 (0.82); 0.38 (0.88); 0.50 (1.14); 0.92; 1.58 (3.54) and 2.41 (4.82)μg/L plasma in the age groups 6-10 years (n=102), 11-17 years (n=499), 18-25 years (n=157), 26-35 years (n=710), 36-45 years (n=400), 46-55 years (n=525) and 56-65 years (n=357), respectively. Similarly, the median (95th percentile) levels of p,p'-DDE were 0.18 (1.24); 0.18 (0.74); 0.24 (0.85); 0.30 (1.20); 0.45 (1.74); 0.64 (3.25) and 0.94 (4.7)μg/L plasma. Finally, the median (95th percentile) of HCB in plasma in these age groups was 0.05 (0.10); 0.06 (0.11); 0.08 (0.15); 0.08 (0.15); 0.11 (0.22); 0.14 (0.42) and 0.20 (0.68)μg/L plasma. Our results prove an overall substantial reduction in the body burden to organochlorine compounds in Germany compared to earlier studies. However, 15% and 3.6% of the examined

Polychlorinated biphenyls (PCB 101, PCB 153 and PCB 180) alter leptin signaling and lipid metabolism in differentiated 3T3-L1 adipocytes

International Nuclear Information System (INIS)

Ferrante, Maria C.; Amero, Paola; Santoro, Anna; Monnolo, Anna; Simeoli, Raffaele; Di Guida, Francesca; Mattace Raso, Giuseppina; Meli, Rosaria

2014-01-01

Non-dioxin-like polychlorinated biphenyls (NDL-PCBs) are highly lipophilic environmental contaminants that accumulate in lipid-rich tissues, such as adipose tissue. Here, we reported the effects induced by PCBs 101, 153 and 180, three of the six NDL-PCBs defined as indicators, on mature 3T3-L1 adipocytes. We observed an increase in lipid content, in leptin gene expression and a reduction of leptin receptor expression and signaling, when cells were exposed to PCBs, alone or in combination. These modifications were consistent with the occurrence of “leptin-resistance” in adipose tissue, a typical metabolic alteration related to obesity. Therefore, we investigated how PCBs affect the expression of pivotal proteins involved in the signaling of leptin receptor. We evaluated the PCB effect on the intracellular pathway JAK/STAT, determining the phosphorylation of STAT3, a downstream activator of the transcription of leptin gene targets, and the expression of SOCS3 and PTP1B, two important regulators of leptin resistance. In particular, PCBs 153 and 180 or all PCB combinations induced a significant reduction in pSTAT3/STAT3 ratio and an increase in PTP1B and SOCS3, evidencing an additive effect. The impairment of leptin signaling was associated with the reduction of AMPK/ACC pathway activation, leading to the increase in lipid content. These pollutants were also able to increase the transcription of inflammatory cytokines (IL-6 and TNFα). It is worthy to note that the PCB concentrations used are comparable to levels detectable in human adipose tissue. Our data strongly support the hypothesis that NDL-PCBs may interfere with the lipid metabolism contributing to the development of obesity and related diseases. - Highlights: • NDL-PCBs alter lipid content and metabolism in 3T3-L1 adipocytes. • Impairment of leptin signaling was induced by NDL-PCBs. • NDL-PCBs reduce AMPK and ACC activation. • NDL-PCBs induce the synthesis of pro-inflammatory cytokine by

Polychlorinated biphenyls (PCB 101, PCB 153 and PCB 180) alter leptin signaling and lipid metabolism in differentiated 3T3-L1 adipocytes

Energy Technology Data Exchange (ETDEWEB)

Ferrante, Maria C. [Department of Veterinary Medicine and Animal Productions, Federico II University of Naples, Via Delpino 1, 80137 Naples (Italy); Amero, Paola; Santoro, Anna [Department of Pharmacy, Federico II University of Naples, Via Montesano 49, 80131 Naples (Italy); Monnolo, Anna [Department of Veterinary Medicine and Animal Productions, Federico II University of Naples, Via Delpino 1, 80137 Naples (Italy); Simeoli, Raffaele; Di Guida, Francesca [Department of Pharmacy, Federico II University of Naples, Via Montesano 49, 80131 Naples (Italy); Mattace Raso, Giuseppina, E-mail: mattace@unina.it [Department of Pharmacy, Federico II University of Naples, Via Montesano 49, 80131 Naples (Italy); Meli, Rosaria, E-mail: meli@unina.it [Department of Pharmacy, Federico II University of Naples, Via Montesano 49, 80131 Naples (Italy)

2014-09-15

Non-dioxin-like polychlorinated biphenyls (NDL-PCBs) are highly lipophilic environmental contaminants that accumulate in lipid-rich tissues, such as adipose tissue. Here, we reported the effects induced by PCBs 101, 153 and 180, three of the six NDL-PCBs defined as indicators, on mature 3T3-L1 adipocytes. We observed an increase in lipid content, in leptin gene expression and a reduction of leptin receptor expression and signaling, when cells were exposed to PCBs, alone or in combination. These modifications were consistent with the occurrence of “leptin-resistance” in adipose tissue, a typical metabolic alteration related to obesity. Therefore, we investigated how PCBs affect the expression of pivotal proteins involved in the signaling of leptin receptor. We evaluated the PCB effect on the intracellular pathway JAK/STAT, determining the phosphorylation of STAT3, a downstream activator of the transcription of leptin gene targets, and the expression of SOCS3 and PTP1B, two important regulators of leptin resistance. In particular, PCBs 153 and 180 or all PCB combinations induced a significant reduction in pSTAT3/STAT3 ratio and an increase in PTP1B and SOCS3, evidencing an additive effect. The impairment of leptin signaling was associated with the reduction of AMPK/ACC pathway activation, leading to the increase in lipid content. These pollutants were also able to increase the transcription of inflammatory cytokines (IL-6 and TNFα). It is worthy to note that the PCB concentrations used are comparable to levels detectable in human adipose tissue. Our data strongly support the hypothesis that NDL-PCBs may interfere with the lipid metabolism contributing to the development of obesity and related diseases. - Highlights: • NDL-PCBs alter lipid content and metabolism in 3T3-L1 adipocytes. • Impairment of leptin signaling was induced by NDL-PCBs. • NDL-PCBs reduce AMPK and ACC activation. • NDL-PCBs induce the synthesis of pro-inflammatory cytokine by

Portable reconfigurable detection and assessment system

International Nuclear Information System (INIS)

Blattman, D.A.

1991-01-01

Rapidly changing geopolitical issues throughout the world have made the ability to effectively respond to political, military, terrorist and peace-keeping requirements increasingly important. Recent Middle East events indicate a continuing escalation in these activities. These activities are defining the requirements for a rapidly deployable, portable, real-time detection and assessment operational security system that is reconfigurable to site specific threats. This paper describes such a system Mobile Operational Detection and Assessment system (MODAS); a commercially-off-the shelf (COTS) integrated and reconfigurable hardware/software system solution for the ever-changing geopolitical security issues of the Nineties

ETSI-Standard Reconfigurable Mobile Device for Supporting the Licensed Shared Access

Directory of Open Access Journals (Sweden)

Kyunghoon Kim

2016-01-01

Full Text Available In order for a Mobile Device (MD to support the Licensed Shared Access (LSA, the MD should be reconfigurable, meaning that the configuration of a MD must be adaptively changed in accordance with the communication standard adopted in a given LSA system. Based on the standard architecture for reconfigurable MD defined in Working Group (WG 2 of the Technical Committee (TC Reconfigurable Radio System (RRS of the European Telecommunications Standards Institute (ETSI, this paper presents a procedure to transfer control signals among the software entities of a reconfigurable MD required for implementing the LSA. This paper also presents an implementation of a reconfigurable MD prototype that realizes the proposed procedure. The modem and Radio Frequency (RF part of the prototype MD are implemented with the NVIDIA GeForce GTX Titan Graphic Processing Unit (GPU and the Universal Software Radio Peripheral (USRP N210, respectively. With a preset scenario that consists of five time slots from different signal environments, we demonstrate superb performance of the reconfigurable MD in comparison to the conventional nonreconfigurable MD in terms of the data receiving rate available in the LSA band at 2.3–2.4 GHz.

HALO: a reconfigurable image enhancement and multisensor fusion system

Science.gov (United States)

Wu, F.; Hickman, D. L.; Parker, Steve J.

2014-06-01

Contemporary high definition (HD) cameras and affordable infrared (IR) imagers are set to dramatically improve the effectiveness of security, surveillance and military vision systems. However, the quality of imagery is often compromised by camera shake, or poor scene visibility due to inadequate illumination or bad atmospheric conditions. A versatile vision processing system called HALO™ is presented that can address these issues, by providing flexible image processing functionality on a low size, weight and power (SWaP) platform. Example processing functions include video distortion correction, stabilisation, multi-sensor fusion and image contrast enhancement (ICE). The system is based around an all-programmable system-on-a-chip (SoC), which combines the computational power of a field-programmable gate array (FPGA) with the flexibility of a CPU. The FPGA accelerates computationally intensive real-time processes, whereas the CPU provides management and decision making functions that can automatically reconfigure the platform based on user input and scene content. These capabilities enable a HALO™ equipped reconnaissance or surveillance system to operate in poor visibility, providing potentially critical operational advantages in visually complex and challenging usage scenarios. The choice of an FPGA based SoC is discussed, and the HALO™ architecture and its implementation are described. The capabilities of image distortion correction, stabilisation, fusion and ICE are illustrated using laboratory and trials data.

PCB Embedded Inductor for High-Frequency ZVS SEPIC Converter

DEFF Research Database (Denmark)

Dou, Yi; Ouyang, Ziwei; Thummala, Prasanth

2018-01-01

The volume and temperature rise of passive components, especially inductors, limit the momentum toward high power density in high-frequency power converters. To address the limitations, PCB integration of passive components should be considered with the benefit of low profile, excellent thermal...... characteristic and cost reduction. This paper investigates an embedded structure of inductors to further increase the power density of a low power DC-DC converter. A pair of coupling inductors have been embedded into the PCB. The detailed embedded process has been described and the characteristics of embedded...

Desenvolvimento de hardware reconfigurável de criptografia assimétrica

Directory of Open Access Journals (Sweden)

Otávio Souza Martins Gomes

2015-01-01

Full Text Available Este artigo apresenta o resultado parcial do desenvolvimento de uma interface de hardware reconfigurável para criptografia assimétrica que permite a troca segura de dados. Hardwares reconfiguráveis permitem o desenvolvimento deste tipo de dispositivo com segurança e flexibilidade e possibilitam a mudança de características no projeto com baixo custo e de forma rápida.Palavras-chave: Criptografia. Hardware. ElGamal. FPGA. Segurança. Development of an asymmetric cryptography reconfigurable harwadre ABSTRACTThis paper presents some conclusions and choices about the development of an asymmetric cryptography reconfigurable hardware interface to allow a safe data communication. Reconfigurable hardwares allows the development of this kind of device with safety and flexibility, and offer the possibility to change some features with low cost and in a fast way.Keywords: Cryptography. Hardware. ElGamal. FPGAs. Security.

Reconfigurable topological photonic crystal

Science.gov (United States)

Shalaev, Mikhail I.; Desnavi, Sameerah; Walasik, Wiktor; Litchinitser, Natalia M.

2018-02-01

Topological insulators are materials that conduct on the surface and insulate in their interior due to non-trivial topology of the band structure. The edge states on the interface between topological (non-trivial) and conventional (trivial) insulators are topologically protected from scattering due to structural defects and disorders. Recently, it was shown that photonic crystals (PCs) can serve as a platform for realizing a scatter-free propagation of light waves. In conventional PCs, imperfections, structural disorders, and surface roughness lead to significant losses. The breakthrough in overcoming these problems is likely to come from the synergy of the topological PCs and silicon-based photonics technology that enables high integration density, lossless propagation, and immunity to fabrication imperfections. For many applications, reconfigurability and capability to control the propagation of these non-trivial photonic edge states is essential. One way to facilitate such dynamic control is to use liquid crystals (LCs), which allow to modify the refractive index with external electric field. Here, we demonstrate dynamic control of topological edge states by modifying the refractive index of a LC background medium. Background index is changed depending on the orientation of a LC, while preserving the topology of the system. This results in a change of the spectral position of the photonic bandgap and the topological edge states. The proposed concept might be implemented using conventional semiconductor technology, and can be used for robust energy transport in integrated photonic devices, all-optical circuity, and optical communication systems.

Chronic treatment with polychlorinated biphenyls (PCB) during pregnancy and lactation in the rat

International Nuclear Information System (INIS)

Cocchi, Daniela; Tulipano, Giovanni; Colciago, Alessandra; Sibilia, Valeria; Pagani, Francesca; Vigano, Daniela; Rubino, Tiziana; Parolaro, Daniela; Bonfanti, Patrizia; Colombo, Anita; Celotti, Fabio

2009-01-01

Polychlorinated biphenyls (PCBs) are pollutants detected in animal tissues and breast milk. The experiments described in the present paper were aimed at evaluating whether the four PCB congeners most abundant in animal tissues (PCB-138, -153, -180 and -126), administered since fetal life till weaning, can induce long-term alterations of GH-axis activity and bone mass in the adult rat. We measured PCB accumulation in rat brain and liver, somatic growth, pituitary GH expression and plasma hormone concentrations at different ages. Finally, we studied hypothalamic somatostatin expression and bone structure in adulthood, following long-term PCB exposure. Dams were treated during pregnancy from GD15 to GD19 and during breast-feeding. A constant reduction of the growth rate in both male and female offspring from weaning to adulthood was observed in exposed animals. Long-lasting alterations on hypothalamic-pituitary GH axis were indeed observed in PCB-exposed rats in adulthood: increased somatostatin expression in hypothalamic periventricular nucleus (both males and females) and lateral arcuate nucleus (males, only) and decreased GH mRNA levels in the pituitary of male rats. Plasma IGF-1 levels were higher in PCB-exposed male and female animals as compared with controls at weaning and tended to be higher at PN60. Plasma testosterone and thyroid hormone concentrations were not significantly affected by exposure to PCBs. In adulthood, PCBs caused a significant reduction of bone mineral content and cortical bone thickness of tibiae in male rat joint to increased width of the epiphyseal cartilage disk. In conclusion, the developmental exposure to the four selected PCB compounds used in the present study induced far-reaching effects in the adult offspring, the male rats appearing more sensitive than females.

PV Reconfiguration Systems: a Technical and Economic Study

Directory of Open Access Journals (Sweden)

Caruso M.

2017-03-01

Full Text Available Dynamical electrical array reconfiguration strategies for grid-connected PV systems have been proposed as solution to improve energy production due to the mismatch effect of PV plants during partial shading conditions. Strategies are based on the use of dynamic connections between PV panels given by the employment of switches that allow for each panel the series, parallel or exclusion connections, physically changing the electrical connections between the related PV modules, consequentially modifying the layout of the plant. Usually the cost of the dynamic matrix is not taken into account. This novel work evaluates the economic advantages obtained by the use of reconfiguration strategies in PV systems, by taking into consideration the price of energy due to incentives in different European and non-European countries and correlates it with the employment of two types of reconfigurators, with different internal structures. For each of the incentives proposed by the different Countries, the main strength and weakness points of the possible investment are highlighted and critically analyzed. From this analysis, it can be stated that the adoption of reconfiguration systems, in certain cases, can be a very convenient solution.

Early weaning PCB 95 exposure alters the neonatal endocrine system: thyroid adipokine dysfunction.

Science.gov (United States)

Ahmed, R G

2013-12-01

Polychlorinated biphenyls (PCBs) are persistent environmental pollutants that can severely disrupt the endocrine system. In the present study, early-weaned male rats were administered a single dose of 2,3,6-2',5'-pentachlorinated biphenyl (PCB 95; 32 mg/kg per day, by i.p. injection) for two consecutive days (postnatal days (PNDs) 15 and 16) and killed 24 and 48 h after the administration of the last dose. Compared with the control group, administration of PCB 95 induced a reduction (Pcolloidal contents at PND 18. The dyshormonogenesis and thyroid dysgenesis may be attributed to the elevation of DNA fragmentation at PNDs 17 and 18. Furthermore, this hypothyroid state revealed higher (Pinsulin at both PNDs compared with the control group. Interestingly, the body weight of the neonates in the PCB 95 group exhibited severe decreases throughout the experimental period in relation to that of the control group. These results imply that PCB 95 may act as a disruptor of the developmental hypothalamic-pituitary-thyroid axis. Hypothyroidism caused by PCB 95 may impair the adipokine axis, fat metabolism, and in general postnatal development. Thus, further studies need to be carried out to understand this concept.

Atropisomers of 2,2',3,3',6,6'-hexachlorobiphenyl (PCB 136) exhibit stereoselective effects on activation of nuclear receptors in vitro.

Science.gov (United States)

Pěnčíková, Kateřina; Brenerová, Petra; Svržková, Lucie; Hrubá, Eva; Pálková, Lenka; Vondráček, Jan; Lehmler, Hans-Joachim; Machala, Miroslav

2017-11-09

PCB 136 is an environmentally relevant chiral PCB congener, which has been found in vivo to be present in form of rotational isomers (atropisomers). Its atropselective biotransformation or neurotoxic effects linked with sensitization of ryanodine receptor suggest that it might interact also with other intracellular receptors in a stereospecific manner. However, possible atropselective effects of PCB 136 on nuclear receptor transactivation remain unknown. Therefore, in this study, atropselective effects of PCB 136 on nuclear receptors controlling endocrine signaling and/or expression of xenobiotic and steroid hormone catabolism were investigated. PCB136 atropisomers were found to exert differential effects on estrogen receptor (ER) activation; (+)-PCB 136 was estrogenic, while (-)-PCB 136 was antiestrogenic. In contrast, inhibition of androgen receptor (AR) activity was not stereospecific. Both PCB136 stereoisomers induced the constitutive androgen receptor (CAR)-dependent gene expression; however, no significant stereospecificity of PCB 136 atropisomers was observed. PCB136 was a partial inducer of the pregnane X receptor (PXR)-dependent gene expression. Here, (-)-PCB 136 was a significantly more potent inducer of PXR activity than (+)-PCB 136. Taken together, the present results indicate that at least two nuclear receptors participating in endocrine regulation or metabolism, ER and PXR, could be regulated in an atropselective manner by chiral PCB 136. The enantioselective enrichment of PCB atropisomers in animal and human tissues may thus have significant consequences for endocrine-disrupting effects of chiral ortho-substituted PCB congeners.

Computerization of the Electronic Scheme Drawing Equipment on Printed-Circuit-Board (PCB) Surface (Phase One)

International Nuclear Information System (INIS)

Abdul Hafid; Pinitoyo, A.; Demon H; Kussigit S; Paidjo; Riswan Dj; Natsir, M.; Dedy H; Edy Karyanta; Edy S

2003-01-01

To increase the capability of the PCB immersion machine developed previous a computerized drawing machine on PCB surface is proposed for drawing the schematic electronic, PROTEL software is used Used is Roland DXY 1100 type which had been modified to accommodate the PCB characteristic, because it is used originally for paper. Concerning, the plotter ink, the waterproof type must be used. (author)

Reconfigurable/Reprogrammable Communications Systems, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — NASA's latest effort in developing a common platform for space communication and navigation systems is the Space Telecommunications Radio System (STRS) standard. It...

Dietary Selenium as a Modulator of PCB 126–Induced Hepatotoxicity in Male Sprague-Dawley Rats

Science.gov (United States)

Lai, Ian K.; Chai, Yingtao; Simmons, Donald; Watson, Walter H.; Tan, Rommel; Haschek, Wanda M.; Wang, Kai; Wang, Bingxuan; Ludewig, Gabriele; Robertson, Larry W.

2011-01-01

Homeostasis of selenium (Se), a critical antioxidant incorporated into amino acids and enzymes, is disrupted by exposure to aryl hydrocarbon receptor (AhR) agonists. Here we examined the importance of dietary Se in preventing the toxicity of the most toxic polychlorinated biphenyl congener, 3,3′,4,4′,5-pentachlorobiphenyl (PCB 126), a potent AhR agonist. Male Sprague-Dawley rats were fed a modified AIN-93 diet with differing dietary Se levels (0.02, 0.2, and 2 ppm). Following 3 weeks of acclimatization, rats from each dietary group were given a single ip injection of corn oil (vehicle), 0.2, 1, or 5 μmol/kg body weight PCB 126, followed 2 weeks later by euthanasia. PCB exposure caused dose-dependent increases in liver weight and at the highest PCB 126 dose decreases in whole body weight gains. Hepatic cytochrome P-450 (CYP1A1) activity was significantly increased even at the lowest dose of PCB 126, indicating potent AhR activation. PCB exposure diminished hepatic Se levels in a dose-dependent manner, and this was accompanied by diminished Se-dependent glutathione peroxidase activity. Both these effects were partially mitigated by Se supplementation. Conversely, thioredoxin (Trx) reductase activity and Trx oxidation state, although significantly diminished in the lowest dietary Se groups, were not affected by PCB exposure. In addition, PCB 126–induced changes in hepatic copper, iron, manganese, and zinc were observed. These results demonstrate that supplemental dietary Se was not able to completely prevent the toxicity caused by PCB 126 but was able to increase moderately the levels of several key antioxidants, thereby maintaining them roughly at normal levels. PMID:21865291

Interactive effects of hypoxia and PCB co-exposure on expression of CYP1A and its potential regulators in Atlantic croaker liver.

Science.gov (United States)

Rahman, Md Saydur; Thomas, Peter

2018-04-01

Although marine and coastal environments which are contaminated with xenobiotic organic compounds often become hypoxic during the summer, the interactive effects of hypoxia and xenobiotic exposure on marine species such as teleost fishes remain poorly understood. The expression and activity of monooxygenase enzyme cytochrome P450-1A (CYP1A) in fishes are upregulated by exposure to polychlorinated biphenyls (PCBs), whereas they are down-regulated during hypoxia exposure. We investigated the interactive effects of hypoxia and PCB co-exposure on hepatic CYP1A expression in Atlantic croaker and on potential regulators of CYP1A. Croaker were exposed to hypoxia (1.7 mg/L dissolved oxygen), 3,3',4,4'-tetrachlorobiphenyl (PCB 77, dose: 2 and 8 µg/g body weight), and Aroclor 1254 (a common PCB mixture, dose: 0.5 and 1 µg/g body weight), alone and in combination for 4 weeks. PCB 77 exposure markedly increased hepatic CYP1A mRNA and protein expression, and ethoxyresorufin-O-deethylase (EROD, an indicator of CYP1A enzyme) activity and increased endothelial nitric oxide synthase (eNOS) protein expression. PCB 77 treatment also increased interleukin-1β (IL-1β, a cytokine) mRNA levels and protein carbonyl (PC, an indicator of reactive oxygen species, ROS) contents. These marked PCB 77- and Aroclor 1254-induced increases in CYP1A mRNA levels and EROD activity were significantly attenuated by co-exposure to hypoxia, whereas the increases in hepatic eNOS protein and IL-1β mRNA expression, and PC contents were augmented by hypoxia co-exposure. The results suggest that biotransformation of organic xenobiotics by CYP1A is reduced in fish during co-exposure to hypoxia and is accompanied by alterations in eNOS, ROS, and IL-1β levels. © 2018 Wiley Periodicals, Inc.

PCB and Dioxin content of Swedish waste fuels; PCB- och dioxininnehaall i svenska avfallsbraenslen

Energy Technology Data Exchange (ETDEWEB)

Blomqvist, Evalena (Swedish National Testing and Research Inst., Boraas (Sweden)) (and others)

2009-06-15

Reported dioxin data in the literature presents a rather large variation, 1-255 ng I-TEQ/kg, among different municipal solid waste (MSW) mixture samples taken within different countries. However the variation is not only large between different countries, a significant variation is reported within each study as well. Results that shows the importance of using reliable and representative sampling methods. The majority of the reported dioxin levels is within 4 to 45 ng I-TEQ/kg waste. In some of the reported studies the dioxin content has as well been analysed in sources-sorted fractions. The majority, 90-95%, of the detected dioxins were found in the fraction consisting of textiles and leather. This study aims to analyse the amount and variations, of the toxic dioxin and PCB congeners within a typical MSW mixture in Sweden, before it is energy recovered in a waste incineration plant. The study includes 20 samples, taken from two different plants in Sweden i.e. Renova and Boraas Energi och Miljoe, during 2007/2008. A well evaluated sampling method were used at both plants to achieve representative samples. Each sampling campaign resulted in a 30 kg sample that was transported in sealed containers to a laboratory. The heat value and a complete determination of the elementary content was analysed as well as the levels of toxic dioxins and PCBs in all samples. All results, both organic and inorganic, were rather similar between the two incineration plants. The resemblance within the results is an outcome of that good and representative sampling method has been used during the sampling campaigns. The average value (+/- standard deviation) of all 20 samples is 29 +/-15 ng I-TEQ per kilo of dry MSW. An average value which is within the lower range of the previous reported levels in the literature. The lower dioxin content within Swedish MSW mixtures is most likely due to the relative well-controlled waste management and sorting system in Sweden. The majority of the

Polychlorinated Biphenyl Sources, Emissions, and Environmental Levels in school Buildings (PCB Workshop presentation)

Science.gov (United States)

Measure PCB emission rates from primary sources in laboratory chambersMeasure transport and sorption by materials and dust in laboratory chambersCharacterize PCBs in school building materialsEstimate PCB emission rates from sources in schoolsExamine congener patterns in sources a...

Rational design of reconfigurable prismatic architected materials

Science.gov (United States)

Overvelde, Johannes T. B.; Weaver, James C.; Hoberman, Chuck; Bertoldi, Katia

2017-01-01

Advances in fabrication technologies are enabling the production of architected materials with unprecedented properties. Most such materials are characterized by a fixed geometry, but in the design of some materials it is possible to incorporate internal mechanisms capable of reconfiguring their spatial architecture, and in this way to enable tunable functionality. Inspired by the structural diversity and foldability of the prismatic geometries that can be constructed using the snapology origami technique, here we introduce a robust design strategy based on space-filling tessellations of polyhedra to create three-dimensional reconfigurable materials comprising a periodic assembly of rigid plates and elastic hinges. Guided by numerical analysis and physical prototypes, we systematically explore the mobility of the designed structures and identify a wide range of qualitatively different deformations and internal rearrangements. Given that the underlying principles are scale-independent, our strategy can be applied to the design of the next generation of reconfigurable structures and materials, ranging from metre-scale transformable architectures to nanometre-scale tunable photonic systems.

Hepatic metabolism affects the atropselective disposition of 2,2',3,3',6,6'-hexachlorobiphenyl (PCB 136) in mice.

Science.gov (United States)

Wu, Xianai; Barnhart, Christopher; Lein, Pamela J; Lehmler, Hans-Joachim

2015-01-06

To understand the role of hepatic vs extrahepatic metabolism in the disposition of chiral PCBs, we studied the disposition of 2,2',3,3',6,6'-hexachlorobiphenyl (PCB 136) and its hydroxylated metabolites (HO-PCBs) in mice with defective hepatic metabolism due to the liver-specific deletion of cytochrome P450 oxidoreductase (KO mice). Female KO and congenic wild type (WT) mice were treated with racemic PCB 136, and levels and chiral signatures of PCB 136 and HO-PCBs were determined in tissues and excreta 3 days after PCB administration. PCB 136 tissue levels were higher in KO compared to WT mice. Feces was a major route of PCB metabolite excretion, with 2,2',3,3',6,6'-hexachlorobiphenyl-5-ol being the major metabolite recovered from feces. (+)-PCB 136, the second eluting PCB 136 atropisomers, was enriched in all tissues and excreta. The second eluting atropisomers of the HO-PCBs metabolites were enriched in blood and liver; 2,2',3,3',6,6'-hexachlorobiphenyl-5-ol in blood was an exception and displayed an enrichment of the first eluting atropisomers. Fecal HO-PCB levels and chiral signatures changed with time and differed between KO and WT mice, with larger HO-PCB enantiomeric fractions in WT compared to KO mice. Our results demonstrate that hepatic and, possibly, extrahepatic cytochrome P450 (P450) enzymes play a role in the disposition of PCBs.

Idaho National Laboratory PCB Annual Document Log and Annual Records Report for calendar year 2014

Energy Technology Data Exchange (ETDEWEB)

Layton, Deborah L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-06-01

The requirements for the reporting of polychlorinated biphenyl (PCB)-related activities are found in 40 Code of Federal Regulations (CFR) 761 Subpart J, "General Records and Reports." The PCB Annual Document Log is a detailed record of the PCB waste handling activities at the facility. The facility must prepare it each year by July 1 and maintain it at the facility for at least 3 years after the facility ceases using or storing PCBs and PCB items. While submittal of the PCB Annual Document Log to the U.S. Environmental Protection Agency (EPA) is not required by regulation, EPA has verbally requested in telephone conversations that this report be submitted to them on an annual basis. The Annual Records are not required to be submitted to EPA and are not considered to be part of the Annual Document Log, but are included to provide the complete disposition history or status of all PCB activities during the year. The Annual Document Log section of this report (Section 2.0) meets the requirements of 40 CFR 761.180(a)(2), as applicable, while the Annual Records section (Section 3.0) meets the requirement of 40 CFR 761.180(a)(1).

Efficient integration of plug-in electric vehicles via reconfigurable microgrids

International Nuclear Information System (INIS)

Kavousi-Fard, Abdollah; Khodaei, Amin

2016-01-01

This paper investigates the viability of the reconfigurable microgrids (RMGs) in facilitating the integration of plug-in electric vehicles (PEVs). The reconfiguration ability of microgrids, which is enabled by the use of remotely controlled switches (RCSs), will support the high penetration of PEVs and renewable distributed generators (DGs) while reducing the total operation cost and potentially enhance microgrid reliability. The objective of the proposed optimal scheduling problem is to minimize the total cost of power supply by distributed energy resources (DERs) and upstream network energy exchange, battery degradation cost in PEVs, cost of switching during the reconfiguration, and expected customer interruption costs as a reliability index. To address the high level of the uncertainties in the problem, a scenario-based stochastic framework is devised to capture the uncertainties associated with the charging and discharging values of PEVs, number of PEVs in each fleet, time of the daily trips for PEVs, hourly load consumption, hourly output power of renewable DGs, and hourly market price. The satisfying performance and merits of the proposed model are examined on a test microgrid. - Highlights: • Introduction of reconfigurable microgrids for providing flexible structure to manage electric loads. • Assessing the effects of the reconfiguration on the integration of PEVs. • Introduction of a stochastic framework for reducing operation and reliability costs in microgrids. • Introduction of a smart charge/discharge scheme for PEVs based on V2G during the reconfiguration.

Idaho National Laboratory PCB Annual Document Log and Annual Records Report for Calendar Year 2013

Energy Technology Data Exchange (ETDEWEB)

no name on report

2014-06-01

The requirements for the reporting of polychlorinated biphenyl (PCB)-related activities are found in 40 Code of Federal Regulations (CFR) 761 Subpart J, "General Records and Reports." The PCB Annual Document Log is a detailed record of the PCB waste handling activities at the facility. The facility must prepare it each year by July 1 and maintain it at the facility for at least 3 years after the facility ceases using or storing PCBs and PCB items. While submittal of the PCB Annual Document Log to the U.S. Environmental Protection Agency (EPA) is not required by regulation, EPA has verbally requested in telephone conversations that this report be submitted to them on an annual basis. The Annual Document Log section of this report meets the requirements of 40 CFR 761.180(a)(2), as applicable, while the Annual Records section meets the requirement of 40 CFR 761.180(a)(1).

Reconfiguring Cooperative Work by Visualizing EPR on Large Projected Screens

DEFF Research Database (Denmark)

Simonsen, Jesper

Simonsen, J. (2006): Reconfiguring Cooperative Work by Visualizing EPR on Large Projected Screens, Paper presented at the PDC 2006 workshop on: Reconfiguring Healthcare: Issues in Computer Supported Cooperative Work in Healthcare Environments. Participatory Design Conference, Trento, Italy, August...

Short-Term Load Forecasting Based Automatic Distribution Network Reconfiguration: Preprint

Energy Technology Data Exchange (ETDEWEB)

Jiang, Huaiguang [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ding, Fei [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yingchen [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jiang, Huaiguang [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ding, Fei [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yingchen [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-07-26

In the traditional dynamic network reconfiguration study, the optimal topology is determined at every scheduled time point by using the real load data measured at that time. The development of load forecasting technique can provide accurate prediction of load power that will happen in future time and provide more information about load changes. With the inclusion of load forecasting, the optimal topology can be determined based on the predicted load conditions during the longer time period instead of using the snapshot of load at the time when the reconfiguration happens, and thus it can provide information to the distribution system operator (DSO) to better operate the system reconfiguration to achieve optimal solutions. Thus, this paper proposes a short-term load forecasting based approach for automatically reconfiguring distribution systems in a dynamic and pre-event manner. Specifically, a short-term and high-resolution distribution system load forecasting approach is proposed with support vector regression (SVR) based forecaster and parallel parameters optimization. And the network reconfiguration problem is solved by using the forecasted load continuously to determine the optimal network topology with the minimum loss at the future time. The simulation results validate and evaluate the proposed approach.

Reconfigurable Integrated Optoelectronics

Directory of Open Access Journals (Sweden)

Richard Soref

2011-01-01

Full Text Available Integrated optics today is based upon chips of Si and InP. The future of this chip industry is probably contained in the thrust towards optoelectronic integrated circuits (OEICs and photonic integrated circuits (PICs manufactured in a high-volume foundry. We believe that reconfigurable OEICs and PICs, known as ROEICs and RPICs, constitute the ultimate embodiment of integrated photonics. This paper shows that any ROEIC-on-a-chip can be decomposed into photonic modules, some of them fixed and some of them changeable in function. Reconfiguration is provided by electrical control signals to the electro-optical building blocks. We illustrate these modules in detail and discuss 3D ROEIC chips for the highest-performance signal processing. We present examples of our module theory for RPIC optical lattice filters already constructed, and we propose new ROEICs for directed optical logic, large-scale matrix switching, and 2D beamsteering of a phased-array microwave antenna. In general, large-scale-integrated ROEICs will enable significant applications in computing, quantum computing, communications, learning, imaging, telepresence, sensing, RF/microwave photonics, information storage, cryptography, and data mining.

The Complete Reconfiguration of Dendritic Gold

Science.gov (United States)

Paneru, Govind; Flanders, Bret

2014-03-01

Reconfigurability-by-design is an important strategy in modern materials science, as materials with this capability could potentially be used to confer hydrophobic, lipophobic, or anti-corrosive character to substrates in a regenerative manner. The present work extends the directed electrochemical nanowire assembly (DENA) methodology, which is a technique that employs alternating voltages to grow single crystalline metallic nanowires and nano-dendrites from simple salt solutions, to enable the complete dissolution of macroscopic arrays of metallic dendrites following their growth. Our main finding is that structural reconfiguration of dendritic gold is induced by changes in the MHz-level frequencies of voltages that are applied to the dendrites. Cyclic voltammetry and micro-Raman spectroscopy have been used to show that dendritic gold grows and dissolves by the same chemical mechanisms as bulk gold. Hence, the redox chemistry that occurs at the crystal-solution interface is no different than the established electrochemistry of gold. What differs in this process and allows for reconfiguration to occur is the diffusive behavior of the gold chloride molecules in the solution adjacent to the interface. We will present a simple model that captures the physics of this behavior.

Enabling Self-Organization in Embedded Systems with Reconfigurable Hardware

Directory of Open Access Journals (Sweden)

Christophe Bobda

2009-01-01

Full Text Available We present a methodology based on self-organization to manage resources in networked embedded systems based on reconfigurable hardware. Two points are detailed in this paper, the monitoring system used to analyse the system and the Local Marketplaces Global Symbiosis (LMGS concept defined for self-organization of dynamically reconfigurable nodes.

SEASONAL INFLUENCES ON PCB RETENTION AND BIOTRANSFORMATION IN FISH

Science.gov (United States)

James, Margaret O.; Kleinow, Kevin M.

2013-01-01

There is extensive evidence that fish from waters with PCB-contaminated sediments accumulate PCBs and related chemicals, and that people who eat fish from contaminated waters have higher body burdens of PCBs and PCB metabolites than those who do not. PCBs and their metabolites are potentially toxic, thus it is important to human health to understand the uptake, biotransformation and elimination of PCBs in fish, since these processes determine the extent of accumulation. The intestinal uptake of PCBs present in the diet of fish into fish tissues is a process that is influenced by the lipid composition of the diet. Biotransformation of PCBs in fish, as in mammals, facilitates elimination, although many PCB congeners are recalcitrant to biotransformation in fish and mammals. Sequential biotransformation of PCBs by cytochrome P450 and conjugation pathways is even less efficient in fish than in mammalian species, thus contributing to the retention of PCBs in fish tissues. A very important factor influencing overall PCB disposition in fish is water temperature. Seasonal changes in water temperature produce adaptive physiological and biochemical changes in fish. While uptake of PCBs from the diet is similar in fish acclimated to winter or summer temperatures, there is evidence that elimination of PCBs occurs much more slowly when the fish is acclimated at low temperatures than at warmer temperatures. Research to date suggests that the processes of elimination of PCBs are modulated by several factors in fish including seasonal changes in water temperature. Thus, the body burden of PCBs in fish from a contaminated location is likely to vary with season. PMID:23494683

Reconfigurable computing the theory and practice of FPGA-based computation

CERN Document Server

Hauck, Scott

2010-01-01

Reconfigurable Computing marks a revolutionary and hot topic that bridges the gap between the separate worlds of hardware and software design- the key feature of reconfigurable computing is its groundbreaking ability to perform computations in hardware to increase performance while retaining the flexibility of a software solution. Reconfigurable computers serve as affordable, fast, and accurate tools for developing designs ranging from single chip architectures to multi-chip and embedded systems. Scott Hauck and Andre DeHon have assembled a group of the key experts in the fields of both hardwa

Electroremediation of PCB contaminated soil combined with iron nanoparticles: Effect of the soil type.

Science.gov (United States)

Gomes, Helena I; Dias-Ferreira, Celia; Ottosen, Lisbeth M; Ribeiro, Alexandra B

2015-07-01

Polychlorinated biphenyls (PCB) are carcinogenic and persistent organic pollutants that accumulate in soils and sediments. Currently, there is no cost-effective and sustainable remediation technology for these contaminants. In this work, a new combination of electrodialytic remediation and zero valent iron particles in a two-compartment cell is tested and compared to a more conventional combination of electrokinetic remediation and nZVI in a three-compartment cell. In the new two-compartment cell, the soil is suspended and stirred simultaneously with the addition of zero valent iron nanoparticles. Remediation experiments are made with two different historically PCB contaminated soils, which differ in both soil composition and contamination source. Soil 1 is a mix of soils with spills of transformer oils, while Soil 2 is a superficial soil from a decommissioned school where PCB were used as windows sealants. Saponin, a natural surfactant, was also tested to increase the PCB desorption from soils and enhance dechlorination. Remediation of Soil 1 (with highest pH, carbonate content, organic matter and PCB concentrations) obtained the maximum 83% and 60% PCB removal with the two-compartment and the three-compartment cell, respectively. The highest removal with Soil 2 were 58% and 45%, in the two-compartment and the three-compartment cell, respectively, in the experiments without direct current. The pH of the soil suspension in the two-compartment treatment appears to be a determining factor for the PCB dechlorination, and this cell allowed a uniform distribution of the nanoparticles in the soil, while there was iron accumulation in the injection reservoir in the three-compartment cell. Copyright © 2015 Elsevier Ltd. All rights reserved.

Modelling PCB bioaccumulation in a Baltic food web

International Nuclear Information System (INIS)

Nfon, Erick; Cousins, Ian T.

2007-01-01

A steady state model is developed to describe the bioaccumulation of organic contaminants by 14 species in a Baltic food web including pelagic and benthic aquatic organisms. The model is used to study the bioaccumulation of five PCB congeners of different chlorination levels. The model predictions are evaluated against monitoring data for five of the species in the food web. Predicted concentrations are on average within a factor of two of measured concentrations. The model shows that all PCB congeners were biomagnified in the food web, which is consistent with observations. Sensitivity analysis reveals that the single most sensitive parameter is log K OW . The most sensitive environmental parameter is the annual average temperature. Although not identified amongst the most sensitive input parameters, the dissolved concentration in water is believed to be important because of the uncertainty in its determination. The most sensitive organism-specific input parameters are the fractional respiration of species from the water column and sediment pore water, which are also difficult to determine. Parameters such as feeding rate, growth rate and lipid content of organism are only important at higher trophic levels. - The bioaccumulation behaviour of PCB congeners in a Baltic food web is studied using a novel mechanistic model

A reconfigurable image tube using an external electronic image readout

Science.gov (United States)

Lapington, J. S.; Howorth, J. R.; Milnes, J. S.

2005-08-01

We have designed and built a sealed tube microchannel plate (MCP) intensifier for optical/NUV photon counting applications suitable for 18, 25 and 40 mm diameter formats. The intensifier uses an electronic image readout to provide direct conversion of event position into electronic signals, without the drawbacks associated with phosphor screens and subsequent optical detection. The Image Charge technique is used to remove the readout from the intensifier vacuum enclosure, obviating the requirement for additional electrical vacuum feedthroughs and for the readout pattern to be UHV compatible. The charge signal from an MCP intensifier is capacitively coupled via a thin dielectric vacuum window to the electronic image readout, which is external to the sealed intensifier tube. The readout pattern is a separate item held in proximity to the dielectric window and can be easily detached, making the system easily reconfigurable. Since the readout pattern detects induced charge and is external to the tube, it can be constructed as a multilayer, eliminating the requirement for narrow insulator gaps and allowing it to be constructed using standard PCB manufacturing tolerances. We describe two readout patterns, the tetra wedge anode (TWA), an optimized 4 electrode device similar to the wedge and strip anode (WSA) but with a factor 2 improvement in resolution, and an 8 channel high speed 50 ohm device, both manufactured as multilayer PCBs. We present results of the detector imaging performance, image resolution, linearity and stability, and discuss the development of an integrated readout and electronics device based on these designs.

Reductive dechlorination of 3,3',4,4'-tetrachlorobiphenyl (PCB77) using palladium or palladium/iron nanoparticles and assessment of the reduction in toxic potency in vascular endothelial cells

International Nuclear Information System (INIS)

Venkatachalam, Karthik; Arzuaga, Xabier; Chopra, Nitin; Gavalas, Vasilis G.; Xu, Jian; Bhattacharyya, Dibakar; Hennig, Bernhard; Bachas, Leonidas G.

2008-01-01

Palladium-based nanoparticles immobilized in polymeric matrices were applied to the reductive dechlorination of 3,3',4,4'-tetrachlorobiphenyl (PCB77) at room temperature. Two different dechlorination platforms were evaluated using (1) Pd nanoparticles within conductive polypyrrole films; or (2) immobilized Fe/Pd nanoparticles within polyvinylidene fluoride microfiltration membranes. For the first approach, the polypyrrole film was electrochemically formed in the presence of perchlorate ions that were incorporated into the film to counter-balance the positive charges of the polypyrrole chain. The film was then incubated in a solution containing tetrachloropalladate ions, which were exchanged with the perchlorate ions within the film. During this exchange, reduction of tetrachloropalladate by polypyrrole occurred, which led to the formation of palladium nanoparticles within the film. For the second approach, the membrane-supported Fe/Pd nanoparticles were prepared in three steps: polymerization of acrylic acid in polyvinylidene fluoride microfiltration membrane pores was followed by ion exchange of Fe 2+ , and then chemical reduction of the ferrous ions bound to the carboxylate groups. The membrane-supported iron nanoparticles were then soaked in a solution of tetrachloropalladate resulting in the deposition of Pd on the Fe surface. The nanoparticles prepared by both approaches were employed in the dechlorination of PCB77. The presence of hydrogen was required when the monometallic Pd nanoparticles were employed. The results indicate the removal of chlorine atoms from PCB77, which led to the formation of lower chlorinated intermediates and ultimately biphenyl. Toxicity associated with vascular dysfunction by PCB77 and biphenyl was compared using cultured endothelial cells. The data strongly suggest that the dechlorination system used in this study markedly reduced the proinflammatory activity of PCB77, a persistent organic pollutant

A highly sensitive and selective aptamer-based colorimetric sensor for the rapid detection of PCB 77.

Science.gov (United States)

Cheng, Ruojie; Liu, Siyao; Shi, Huijie; Zhao, Guohua

2018-01-05

A highly sensitive, specific and simple colorimetric sensor based on aptamer was established for the detection of polychlorinated biphenyls (PCB 77). The use of unmodified gold nanoparticles as a colorimetric probe for aptamer sensors enabled the highly sensitive and selective detection of polychlorinated biphenyls (PCB 77). A linear range of 0.5nM to 900nM was obtained for the colorimetric assay with a minimum detection limit of 0.05nM. In addition, by the methods of circular dichroism, UV and naked eyes, we found that the 35 base fragments retained after cutting 5 bases from the 5 'end of aptamer plays the most significant role in the PCB 77 specific recognition process. We found a novel way to truncated nucleotides to optimize the detection of PCB 77, and the selected nucleotides also could achieve high affinity with PCB 77. At the same time, the efficient detection of the PCB 77 by our colorimetric sensor in the complex environmental water samples was realized, which shows a good application prospect. Copyright © 2017 Elsevier B.V. All rights reserved.

El Diseño Modular en el contexto del desarrollo de Máquinas Herramienta Reconfigurables. // Modular Design in the development of reconfigurable Machine Tools´ context.

Directory of Open Access Journals (Sweden)

R. Pérez Rodríguez

2005-05-01

Full Text Available Las tendencias actuales en los procesos de manufactura reflejan los cambios en las demandas de los clientes. En nuestrosdías, el mercado requiere inexorablemente de productos cada vez más personalizados, por lo que se tiende de unaproducción masiva hacia un tipo específico de producción, en menos tiempo y con menos costos de producción. Enrespuesta a esta necesidad, la nueva generación de máquinas herramienta debe de ser reconfigurable e inteligente. Lascaracterísticas principales de las Máquinas Reconfigurables e Inteligentes son la modularidad, convertibilidad, flexibilidady efectividad en los costos. Este artículo presenta un enfoque para el diseño modular de máquinas herramienta, basado en elportafolio de productos del constructor de máquinas. La metodología parte de un conjunto de requerimientos funcionalesdefinidos por el constructor de máquinas y ofrece una descripción de los posibles módulos que pueden ser desarrolladospara una determinada máquina herramienta reconfigurable.Palabras claves: Diseño modular, máquinas herramienta, reconfigurable, inteligente.___________________________________________________________________________Abstract.The manufacturing tendencies reflect the changes on the customer demands. Nowadays, the market is constantly requiringmore customized products, moving from mass production to “one-of-a-kind production” in less time with lower productioncosts. In response to this need, the next generation of machine tools should be reconfigurable and intelligent.Reconfigurability allows for the reduction of machine design lead time, machine set-up and ramp-up time. The principalcharacteristics of the Reconfigurable and Intelligent Machines are modularity, convertibility, flexibility and costeffectiveness.This paper presents an approach for the design of machine tools modules, based on the product portfolio ofthe machine tool builder. The methodology takes as input a set of functional requirements

Mobile Technology: Binding Social and Cloud into a New Enterprise Applications Platform

Directory of Open Access Journals (Sweden)

Luminita HURBEAN

2013-01-01

Full Text Available Nowadays, the IT industry is revolving around the build-out and adoption of a new platform, characterized by mobility, cloud-based application and service delivery, and value-generating overlays of social business and pervasive analytics. The paper explores the convergence of mobile, cloud, and social, as well as the effects for the enterprise and the emergence of the new enterprise application platforms. In the beginning we set the stage, while showing the ex-pansion of the mobile, cloud, and social in the business information system, as they were found in the literature. We then look over the IT trends, especially the consumerization of IT, as reasons and basis for the information systems embracing of mobile. Afterwards, we present a mobility roadmap for the enterprise and illustrate the reconfiguration of the enterprise ap-plication platform.

Green tea diet decreases PCB 126-induced oxidative stress in mice by upregulating antioxidant enzymes

Science.gov (United States)

Newsome, Bradley J; Petriello, Michael C; Han, Sung Gu; Murphy, Margaret O; Eske, Katryn E; Sunkara, Manjula; Morris, Andrew J; Hennig, Bernhard

2013-01-01

Superfund chemicals such as polychlorinated biphenyls pose a serious human health risk due to their environmental persistence and link to multiple diseases. Selective bioactive food components such as flavonoids have been shown to ameliorate PCB toxicity, but primarily in an in vitro setting. Here, we show that mice fed a green tea-enriched diet and subsequently exposed to environmentally relevant doses of coplanar PCB exhibit decreased overall oxidative stress primarily due to the upregulation of a battery of antioxidant enzymes. C57BL/6 mice were fed a low fat diet supplemented with green tea extract (GTE) for 12 weeks and exposed to 5 μmol PCB 126/kg mouse weight (1.63 mg/kg-day) on weeks 10, 11 and 12 (total body burden: 4.9 mg/kg). F2-Isoprostane and its metabolites, established markers of in vivo oxidative stress, measured in plasma via HPLC-MS/MS exhibited five-fold decreased levels in mice supplemented with GTE and subsequently exposed to PCB compared to animals on a control diet exposed to PCB. Livers were collected and harvested for both mRNA and protein analyses, and it was determined that many genes transcriptionally controlled by AhR and Nrf2 proteins were upregulated in PCB-exposed mice fed the green tea supplemented diet. An increased induction of genes such as SOD1, GSR, NQO1 and GST, key antioxidant enzymes, in these mice (green tea plus PCB) may explain the observed decrease in overall oxidative stress. A diet supplemented with green tea allows for an efficient antioxidant response in the presence of PCB 126 which supports the emerging paradigm that healthful nutrition may be able to bolster and buffer a physiological system against the toxicities of environmental pollutants. PMID:24378064

Architecture for dynamically reconfigurable real-time lossless compression

Science.gov (United States)

Carter, Alison J.; Audsley, Neil C.

2004-05-01

Image compression is a computationally intensive task, which can be undertaken most efficiently by dedicated hardware. If a portable device is to carry out real-time compression on a variety of image types, then it may be useful to reconfigure the circuitry dynamically. Using commercial off-the shelf (COTS) chips, reconfiguration is usually implemented by a complete re-load from memory, but it is also possible to perform a partial reconfiguration. This work studies the use of programmable hardware devices to implement the lossless JPEG compression algorithm in real-time on a stream of independent image frames. The data rate is faster than can be compressed serially in hardware by a single processor, so the operation is split amongst several processors. These are implemented as programmable circuits, together with necessary buffering of input and output data. The timing of input and output, bearing in mind the different, and context-dependent amounts of data due to Huffman coding, is analyzed using storage-timing graphs. Because there may be differing parameters from one frame to the next, several different configurations are prepared and stored, ready to load as required. The scheduling of these reconfigurations, and the distribution/recombination of data streams is studied, giving an analysis of the real-time performance.

Configuration Method Design for Reconfigurable Manufacturing System with the aid of Plant Simulation

DEFF Research Database (Denmark)

Li, Yang; Zhang, Shuai; Bilberg, Arne

2014-01-01

A new Reconfigurable Manufacturing System structure has been recently designed by a large consumer goods manufacturer in Europe, aiming to balance the performance of productivity and flexibility. This article shows an exploratory research on the (re)configuration procedure of the new RMS structure....... Following the procedure which is designed in this paper, the (re)configuration of RMS can be managed as part of the daily operation with the help of computer simulation. Keywords: Plant Simulation, Tecnomatix, Reconfigurable Manufacturing System, modular manufacturing....

Centralised versus Decentralised Control Reconfiguration for Collaborating Underwater Robots

DEFF Research Database (Denmark)

Furno, Lidia; Nielsen, Mikkel Cornelius; Blanke, Mogens

2015-01-01

The present paper introduces an approach to fault-tolerant reconfiguration for collaborating underwater robots. Fault-tolerant reconfiguration is obtained using the virtual actuator approach, Steen (2005). The paper investigates properties of a centralised versus a decentralised implementation an...... an underwater drill needs to be transported and positioned by three collaborating robots as part of an underwater autonomous operation....

Bioremediation trial on aged PCB-polluted soils--a bench study in Iceland.

Science.gov (United States)

Lehtinen, Taru; Mikkonen, Anu; Sigfusson, Bergur; Ólafsdóttir, Kristín; Ragnarsdóttir, Kristín Vala; Guicharnaud, Rannveig

2014-02-01

Polychlorinated biphenyls (PCBs) pose a threat to the environment due to their high adsorption capacity to soil organic matter, stability and low reactivity, low water solubility, toxicity and ability to bioaccumulate. With Icelandic soils, research on contamination issues has been very limited and no data has been reported either on PCB degradation potential or rate. The goals of this research were to assess the bioavailability of aged PCBs in the soils of the old North Atlantic Treaty Organization facility in Keflavík, Iceland and to find the best biostimulation method to decrease the pollution. The effectiveness of different biostimulation additives (N fertiliser, white clover and pine needles) at different temperatures (10 and 30 °C) and oxygen levels (aerobic and anaerobic) were tested. PCB bioavailability to soil fauna was assessed with earthworms (Eisenia foetida). PCBs were bioavailable to earthworms (bioaccumulation factor 0.89 and 0.82 for earthworms in 12.5 ppm PCB soil and in 25 ppm PCB soil, respectively), with less chlorinated congeners showing higher bioaccumulation factors than highly chlorinated congeners. Biostimulation with pine needles at 10 °C under aerobic conditions resulted in nearly 38 % degradation of total PCBs after 2 months of incubation. Detection of the aerobic PCB degrading bphA gene supports the indigenous capability of the soils to aerobically degrade PCBs. Further research on field scale biostimulation trials with pine needles in cold environments is recommended in order to optimise the method for onsite remediation.

NASA Airborne Science Program: NASA Stratospheric Platforms

Science.gov (United States)

Curry, Robert E.

2010-01-01

The National Aeronautics and Space Administration conducts a wide variety of remote sensing projects using several unique aircraft platforms. These vehicles have been selected and modified to provide capabilities that are particularly important for geophysical research, in particular, routine access to very high altitudes, long range, long endurance, precise trajectory control, and the payload capacity to operate multiple, diverse instruments concurrently. While the NASA program has been in operation for over 30 years, new aircraft and technological advances that will expand the capabilities for airborne observation are continually being assessed and implemented. This presentation will review the current state of NASA's science platforms, recent improvements and new missions concepts as well as provide a survey of emerging technologies unmanned aerial vehicles for long duration observations (Global Hawk and Predator). Applications of information technology that allow more efficient use of flight time and the ability to rapidly reconfigure systems for different mission objectives are addressed.

Investigating Intergenerational Differences in Human PCB Exposure due to Variable Emissions and Reproductive Behaviors

Science.gov (United States)

Quinn, Cristina L.; Wania, Frank; Czub, Gertje; Breivik, Knut

2011-01-01

Background Reproductive behaviors—such as age of childbearing, parity, and breast-feeding prevalence—have changed over the same historical time period as emissions of polychlorinated biphenyls (PCB) and may produce intergenerational differences in human PCB exposure. Objectives Our goal in this study was to estimate prenatal, postnatal, and lifetime PCB exposures for women at different ages according to year of birth, and to evaluate the impact of reproductive characteristics on intergenerational differences in exposure. Methods We used the time-variant mechanistic model CoZMoMAN to calculate human bioaccumulation of PCBs, assuming both hypothetical constant and realistic time-variant emissions. Results Although exposure primarily depends on when an individual was born relative to the emission history of PCBs, reproductive behaviors can have a significant impact. Our model suggests that a mother’s reproductive history has a greater influence on the prenatal and postnatal exposures of her children than it does on her own cumulative lifetime exposure. In particular, a child’s birth order appears to have a strong influence on their prenatal exposure, whereas postnatal exposure is determined by the type of milk (formula or breast milk) fed to the infant. Conclusions Prenatal PCB exposure appears to be delayed relative to the time of PCB emissions, particularly among those born after the PCB production phaseout. Consequently, the health repercussions of environmental PCBs can be expected to persist for several decades, despite bans on their production for > 40 years. PMID:21156396

Response of PCB contamination in stream fish to abatement actions at an industrial site

International Nuclear Information System (INIS)

Southworth, G.R.; Peterson, M.J.; McCarthy, J.F.; Milne, G.

1995-01-01

The Paducah Gaseous Diffusion Plant (PGDP) in Paducah, Kentucky, used large quantities of PCBs in equipment associated with the great electric power requirements of isotopic enrichment of uranium. Historic losses of PCBs in the 1950s and 1960s have left a legacy of contamination at the site. A biological monitoring program implemented in 1987 found PCBs in PGDP effluents and in fish downstream from facility discharges. As a consequence, a fish consumption advisory was posted on Little Bayou Creek by the Commonwealth of Kentucky in 1987, and regulatory discharge limits for PCBs at PGDP were reduced. Monitoring at multiple locations in receiving streams indicated that PGDP discharges were more important than in stream sediment contamination as sources of PCBs to fish. Environmental management and compliance staff at PGDP led an effort to reduce PCB discharges and monitor the effects of those actions. The active discharge of uncontaminated process water to historically PCB-contaminated drainage systems was found to mobilize PCBs into KPDES (Clean Water Act) regulated effluents. Efforts to locate PCB sources within the plant, coupled with improvements in management practices and remedial actions, appear to have been successful in reducing PCB discharges from these sources. Actions included emplacing passive monitors in the plant drainage system to identify this as a chronic source, and consolidating and re-routing effluents to minimize flow through PCB-contaminated channels. As a consequence, PCB contamination in fish in small streams receiving plant discharges decreased 75% over from 1992--1995

Migration and opportunistic feeding increase PCB accumulation in Arctic seabirds.

Science.gov (United States)

Baert, J M; Janssen, C R; Borgå, K; De Laender, F

2013-10-15

It is widely accepted that body concentrations of persistent organic pollutants (POPs) tend to increase with trophic level (TL). Yet, little attention has been paid to the causes in the underlying differences in POP body concentrations between species occupying similar TLs. In this paper we use two modeling approaches to quantify the importance of migration and opportunistic feeding, relative to that of trophic level, in explaining interspecific differences in polychlorinated biphenyl (PCB) body concentrations between 6 Arctic seabird species breeding in the Barents Sea: Little Auk (Alle alle), Black Guillemot (Cepphus grylle), Brünnich's Guillemot (Uria lomvia), Common Eider (Somateria mollissima), Black-legged Kittiwake (Rissa tridactyla), and Glaucous Gull (Larus hyperboreus). As a first approach, we use additive models to analyze two independent data sets (n = 470 and n = 726). We demonstrate that migration, opportunistic feeding, and TL significantly (p < 0.001) increase PCB body concentrations by a factor 3.61-4.10, 2.66-20.95, and 2.38-2.41, respectively. Our second approach, using a mechanistic bioaccumulation model, confirmed these positive effects on the body burdens but suggested lower effects of migration, opportunistic feeding, and TL (1.55, 2.39, and 2.38) than did our statistical analysis. These two independent approaches demonstrate that the effects of migration and opportunistic feeding on seabird body burdens can be similar to that of an increase of one TL and should therefore be accounted for in future analyses.

Editor's Highlight: Congener-Specific Disposition of Chiral Polychlorinated Biphenyls in Lactating Mice and Their Offspring: Implications for PCB Developmental Neurotoxicity.

Science.gov (United States)

Kania-Korwel, Izabela; Lukasiewicz, Tracy; Barnhart, Christopher D; Stamou, Marianna; Chung, Haeun; Kelly, Kevin M; Bandiera, Stelvio; Lein, Pamela J; Lehmler, Hans-Joachim

2017-07-01

Chiral polychlorinated biphenyl (PCB) congeners have been implicated by laboratory and epidemiological studies in PCB developmental neurotoxicity. These congeners are metabolized by cytochrome P450 (P450) enzymes to potentially neurotoxic hydroxylated metabolites (OH-PCBs). The present study explores the enantioselective disposition and toxicity of 2 environmentally relevant, neurotoxic PCB congeners and their OH-PCB metabolites in lactating mice and their offspring following dietary exposure of the dam. Female C57BL/6N mice (8-weeks old) were fed daily, beginning 2 weeks prior to conception and continuing throughout gestation and lactation, with 3.1 µmol/kg bw/d of racemic 2,2',3,5',6-pentachlorobiphenyl (PCB 95) or 2,2',3,3',6,6'-hexachlorobiphenyl (PCB 136) in peanut butter; controls received vehicle (peanut oil) in peanut butter. PCB 95 levels were higher than PCB 136 levels in both dams and pups, consistent with the more rapid metabolism of PCB 136 compared with PCB 95. In pups and dams, both congeners were enriched for the enantiomer eluting second on enantioselective gas chromatography columns. OH-PCB profiles in lactating mice and their offspring were complex and varied according to congener, tissue and age. Developmental exposure to PCB 95 versus PCB 136 differentially affected the expression of P450 enzymes as well as neural plasticity (arc and ppp1r9b) and thyroid hormone-responsive genes (nrgn and mbp). The results suggest that the enantioselective metabolism of PCBs to OH-PCBs may influence neurotoxic outcomes following developmental exposures, a hypothesis that warrants further investigation. © The Author 2017. Published by Oxford University Press on behalf of the Society of Toxicology. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Stratospheric Platforms for Monitoring Purposes

International Nuclear Information System (INIS)

Konigorski, D.; Gratzel, U.; Obersteiner, M.; Schneidereit, M.

2010-01-01

) incrementally, e.g. by deploying additional High Altitude Platforms (HAPs); Ability to service / update / reconfigure payload; Close range - for both monitoring and communications: 1. Monitoring from e.g. 20 km distance, compared with about 450 km for a Low Earth Orbit (LEO) satellite. Furthermore the platforms facilitate very high spatial resolution. 2. Extremely high overall payload and power capacity and can replace extensive ground infrastructure (e.g. telecoms masts); Stratospheric platforms can also make use of low temperatures (superconducting), large antennas (high resolution), less atmosphere (high power microwave) and energy collection and transmission (electric power support of high altitude UAVs). The paper will discuss the potential of stratospheric platforms for safeguards applications. (author)

PCB and PAH release from power stations and waste incineration processes in the UK

Energy Technology Data Exchange (ETDEWEB)

Dyke, Patrick H. [PD Consulting, Magdalen, Brobury, HR3 6DX (United Kingdom); Foan, Colin [The Environment Agency, National Centre for Risk Analysis and Options Appraisal, Kings Meadow House, Kings Meadow Road, Reading, (United Kingdom); Fiedler, Heidelore [United Nations Environment Programme (UNEP) Chemicals, 11-13, chemin des Anemones, CH-1219, Chatelaine (Switzerland)

2003-01-01

This study focused on emissions of polychlorinated biphenyls (PCB) and polycyclic aromatic hydrocarbons (PAH) from incineration and power generation processes. Increased concern over human exposure to both classes of compounds has meant that environmental regulators need to assess the contribution made by emissions from regulated processes to human exposure. In the first part of an assessment in the UK we reviewed literature data on emissions of PCB, focusing on the dioxin-like PCB assigned toxic equivalency factors by the World Health Organization, and PAH. The literature study was supplemented by a series of plant tests to gather initial real plant data. Literature data were limited and the lack of standard protocols for measurement and reporting of both PCB and PAH meant that few data sets were comparable. Levels of dioxin-like PCB reported in the literature and measured in UK plant tests showed that well-controlled modern combustion plants with comprehensive pollution controls gave low emissions, typically about 5-10% of the toxic equivalent of the emissions of polychlorinated dibenzodioxins and dibenzofurans at the same plants and below the widely used standard of 0.1 ng TEQ/N m{sup 3}. (Author)

Compact, Frequency Reconfigurable, Printed Monopole Antenna

Directory of Open Access Journals (Sweden)

Ricardo Gonçalves

2012-01-01

Full Text Available This paper proposes a possible implementation of a compact printed monopole antenna, useful to operate in UMTS and WLAN bands. In order to accomplish that, a miniaturization technique based on the application of chip inductors is used in conjunction with frequency reconfiguration capability. The chip inductors change the impedance response of the monopole, allowing to reduce the resonant frequency. In order to be able to operate the antenna in these two different frequencies, an antenna reconfiguration technique based on PIN diodes is applied. This procedure allows the change of the active form of the antenna leading to a shift in the resonant frequency. The prototype measurements show good agreement with the simulation results.

Alberta opens its borders to PCB waste from other provinces for destruction

International Nuclear Information System (INIS)

Hurst, R.

1995-01-01

The most recent and most significant development in the management of PCBs in Canada occurred with the announcement of the Alberta government that it would open its provincial borders to PCB and other hazardous wastes from across Canada for incineration at the province's special waste treatment facility located at Swan Hills, Alberta. The facility has an annual capacity of 15,000 tonnes of PCB waste. Alberta 's own waste products will be treated first; any excess capacity will be utilized to treat waste materials received from other provinces. It is estimated that given the Swan Hills plant capacity, it will take several years to treat and destroy all of Canada's current PCB waste inventory. Regulations concerning transportation, contracting requirements and pricing policies were briefly reviewed

Using instability to reconfigure smart structures in a spring-mass model

Science.gov (United States)

Zhang, Jiaying; McInnes, Colin R.

2017-07-01

Multistable phenomenon have long been used in mechanism design. In this paper a subset of unstable configurations of a smart structure model will be used to develop energy-efficient schemes to reconfigure the structure. This new concept for reconfiguration uses heteroclinic connections to transition the structure between different unstable equal-energy states. In an ideal structure model zero net energy input is required for the reconfiguration, compared to transitions between stable equilibria across a potential barrier. A simple smart structure model is firstly used to identify sets of equal-energy unstable configurations using dynamical systems theory. Dissipation is then added to be more representative of a practical structure. A range of strategies are then used to reconfigure the smart structure using heteroclinic connections with different approaches to handle dissipation.

Autonomous Reconfiguration Procedures for EJB-based Enterprise Applications

OpenAIRE

Vogel, Thomas; Bruhn, Jens; Wirtz, Guido

2018-01-01

Enterprise Applications (EA) are complex software systems for supporting the business of companies. Evolution of an EA should not affect its availability, e.g., because of a temporal shutdown, business operations may be affected. One possibility to address this problem is the seamless reconfiguration of the affected EA, i.e., applying the relevant changes while the system is running. Our approach to seamless reconfiguration focuses on component-oriented EAs. It is based on the Autonomic Compu...

Dynamic Reconfiguration in Mobile Systems

NARCIS (Netherlands)

Smit, Gerardus Johannes Maria; Glesner, Manfred; Zipf, Peter; Smit, L.T.; Havinga, Paul J.M.; Heysters, P.M.; Renovell, Michel; Rosien, M.A.J.

Dynamically reconfigurable systems have the potential of realising efficient systems as well as providing adaptability to changing system requirements. Such systems are suitable for future mobile multimedia systems that have limited battery resources, must handle diverse data types, and must operate

Reconfiguration in Mobile Multimedia Systems

NARCIS (Netherlands)

Smit, Gerardus Johannes Maria; Havinga, Paul J.M.; Bos, M.; Smit, L.T.; Heysters, P.M.

2000-01-01

Dynamically reconfigurable systems offer the potential for realising efficient systems as well as providing adaptability to changing system requirements. Such systems are suitable for future mobile multimedia systems that have limited battery resources, must handle diverse data types, and must

DSF: A Common Platform for Distributed Systems Research and Development

Science.gov (United States)

Tang, Chunqiang

This paper presents Distributed Systems Foundation (DSF), a common platform for distributed systems research and development. It can run a distributed algorithm written in Java under multiple execution modes—simulation, massive multi-tenancy, and real deployment. DSF provides a set of novel features to facilitate testing and debugging, including chaotic timing test and time travel debugging with mutable replay. Unlike existing research prototypes that offer advanced debugging features by hacking programming tools, DSF is written entirely in Java, without modifications to any external tools such as JVM, Java runtime library, compiler, linker, system library, OS, or hypervisor. This simplicity stems from our goal of making DSF not only a research prototype but more importantly a production tool. Experiments show that DSF is efficient and easy to use. DSF's massive multi-tenancy mode can run 4,000 OS-level threads in a single JVM to concurrently execute (as opposed to simulate) 1,000 DHT nodes in real-time.

The Common Data Acquisition Platform in the Helmholtz Association

International Nuclear Information System (INIS)

Kaever, P.; Balzer, M.; Kopmann, A.; Zimmer, M.; Rongen, H.

2017-01-01

Various centres of the German Helmholtz Association (HGF) started in 2012 to develop a modular data acquisition (DAQ) platform, covering the entire range from detector readout to data transfer into parallel computing environments. This platform integrates generic hardware components like the multi-purpose HGF-Advanced Mezzanine Card or a smart scientific camera framework, adding user value with Linux drivers and board support packages. Technically the scope comprises the DAQ-chain from FPGA-modules to computing servers, notably frontend-electronics-interfaces, microcontrollers and GPUs with their software plus high-performance data transmission links. The core idea is a generic and component-based approach, enabling the implementation of specific experiment requirements with low effort. This so called DTS-platform will support standards like MTCA.4 in hard- and software to ensure compatibility with commercial components. Its capability to deploy on other crate standards or FPGA-boards with PCI express or Ethernet interfaces remains an essential feature. Competences of the participating centres are coordinated in order to provide a solid technological basis for both research topics in the Helmholtz Programme ''Matter and Technology'': ''Detector Technology and Systems'' and ''Accelerator Research and Development''. The DTS-platform aims at reducing costs and development time and will ensure access to latest technologies for the collaboration. Due to its flexible approach, it has the potential to be applied in other scientific programs.

The Common Data Acquisition Platform in the Helmholtz Association

Science.gov (United States)

Kaever, P.; Balzer, M.; Kopmann, A.; Zimmer, M.; Rongen, H.

2017-04-01

Various centres of the German Helmholtz Association (HGF) started in 2012 to develop a modular data acquisition (DAQ) platform, covering the entire range from detector readout to data transfer into parallel computing environments. This platform integrates generic hardware components like the multi-purpose HGF-Advanced Mezzanine Card or a smart scientific camera framework, adding user value with Linux drivers and board support packages. Technically the scope comprises the DAQ-chain from FPGA-modules to computing servers, notably frontend-electronics-interfaces, microcontrollers and GPUs with their software plus high-performance data transmission links. The core idea is a generic and component-based approach, enabling the implementation of specific experiment requirements with low effort. This so called DTS-platform will support standards like MTCA.4 in hard- and software to ensure compatibility with commercial components. Its capability to deploy on other crate standards or FPGA-boards with PCI express or Ethernet interfaces remains an essential feature. Competences of the participating centres are coordinated in order to provide a solid technological basis for both research topics in the Helmholtz Programme ``Matter and Technology'': ``Detector Technology and Systems'' and ``Accelerator Research and Development''. The DTS-platform aims at reducing costs and development time and will ensure access to latest technologies for the collaboration. Due to its flexible approach, it has the potential to be applied in other scientific programs.

A Taxonomy of Reconfigurable Single-/Multiprocessor Systems-on-Chip

Directory of Open Access Journals (Sweden)

Diana Göhringer

2009-01-01

Full Text Available Runtime adaptivity of hardware in processor architectures is a novel trend, which is under investigation in a variety of research labs all over the world. The runtime exchange of modules, implemented on a reconfigurable hardware, affects the instruction flow (e.g., in reconfigurable instruction set processors or the data flow, which has a strong impact on the performance of an application. Furthermore, the choice of a certain processor architecture related to the class of target applications is a crucial point in application development. A simple example is the domain of high-performance computing applications found in meteorology or high-energy physics, where vector processors are the optimal choice. A classification scheme for computer systems was provided in 1966 by Flynn where single/multiple data and instruction streams were combined to four types of architectures. This classification is now used as a foundation for an extended classification scheme including runtime adaptivity as further degree of freedom for processor architecture design. The developed scheme is validated by a multiprocessor system implemented on reconfigurable hardware as well as by a classification of existing static and reconfigurable processor systems.

Developmental exposure to an environmental PCB mixture delays the propagation of electrical kindling from the amygdala.

Science.gov (United States)

Bandara, Suren B; Sadowski, Renee N; Schantz, Susan L; Gilbert, Mary E

2017-01-01

Developmental PCB exposure impairs hearing and induces brainstem audiogenic seizures in adult offspring. The degree to which this enhanced susceptibility to seizure is manifest in other brain regions has not been examined. Thus, electrical kindling of the amygdala was used to evaluate the effect of developmental exposure to an environmentally relevant PCB mixture on seizure susceptibility in the rat. Female Long-Evans rats were dosed orally with 0 or 6mg/kg/day of the PCB mixture dissolved in corn oil vehicle 4 weeks prior to mating and continued through gestation and up until postnatal day (PND) 21. On PND 21, pups were weaned, and two males from each litter were randomly selected for the kindling study. As adults, the male rats were implanted bilaterally with electrodes in the basolateral amygdala. For each animal, afterdischarge (AD) thresholds in the amygdala were determined on the first day of testing followed by once daily stimulation at a standard 200μA stimulus intensity until three stage 5 generalized seizures (GS) ensued. Developmental PCB exposure did not affect the AD threshold or total cumulative AD duration, but PCB exposure did increase the latency to behavioral manifestations of seizure propagation. PCB exposed animals required significantly more stimulations to reach stage 2 seizures compared to control animals, indicating attenuated focal (amygdala) excitability. A delay in kindling progression in the amygdala stands in contrast to our previous finding of increased susceptibility to brainstem-mediated audiogenic seizures in PCB-exposed animals in response to a an intense auditory stimulus. These seemingly divergent results are not unexpected given the distinct source, type, and mechanistic underpinnings of these different seizure models. A delay in epileptogenesis following focal amygdala stimulation may reflect a decrease in neuroplasticity following developmental PCB exposure consistent with reductions in use-dependent synaptic plasticity that

Reconfigurable manufacturing execution system for pipe cutting

Science.gov (United States)

Yin, Y. H.; Xie, J. Y.

2011-08-01

This article presents a reconfigurable manufacturing execution system (RMES) filling the gap between enterprise resource planning and resource layer for pipe-cutting production with mass customisation and rapid adaptation to dynamic market, which consists of planning and scheduling layer and executive control layer. Starting from customer's task and process requirements, the cutting trajectories are planned under generalised mathematical model able to reconfigure in accordance with various intersecting types' joint, and all tasks are scheduled by nesting algorithm to maximise the utilisation rate of rough material. This RMES for pipe cutting has been effectively implemented in more than 100 companies.

Reconfigurable Robust Routing for Mobile Outreach Network

Science.gov (United States)

Lin, Ching-Fang

2010-01-01

The Reconfigurable Robust Routing for Mobile Outreach Network (R3MOO N) provides advanced communications networking technologies suitable for the lunar surface environment and applications. The R3MOON techn ology is based on a detailed concept of operations tailored for luna r surface networks, and includes intelligent routing algorithms and wireless mesh network implementation on AGNC's Coremicro Robots. The product's features include an integrated communication solution inco rporating energy efficiency and disruption-tolerance in a mobile ad h oc network, and a real-time control module to provide researchers an d engineers a convenient tool for reconfiguration, investigation, an d management.

Planar PCB Hazards to Fish, Wildlife, and Invertebrates: A Synoptic Review

Science.gov (United States)

Eisler, R.; Belisle, A.A.

1996-01-01

Ecological and toxicological aspects of polychlorinated biphenyls (PCBs) in the environment are reviewed with emphasis on biologically active congeners and fish and wildlife. Subtopics include sources and uses, chemical and biochemical properties, concentrations in field collections, lethal and sublethal effects, and recommendations for the protection of sensitive resources. All production of PCBs in the United States ceased in 1977. Of the 1.2 million tons of PCBs manufactured to date, about 65% are still in use in electrical equipment and 31% in various environmental compartments, and 4% were degraded or incinerated. The 209 PCB congeners and their metabolites show wide differences in biological effects. A significant part of the toxicity associated with commercial PCB mixtures is related to the presence of about 20 planar congeners, i.e., congeners without chlorine substitution in the ortho position. Toxic planar congeners, like other PCB congeners, have been detected in virtually all analyzed samples, regardless of collection locale. Planar PCB concentrations were usually highest in samples from near urban areas and in fat and liver tissues, filter-feeding bivalve mollusks, fish-eating birds, and carnivorous marine mammals. Adverse effects of planar PCBs on growth, survival, and reproduction are highly variable because of numerous biotic and abiotic modifiers, including interaction with other chemicals. In general, embryos and juveniles were the most sensitive stages tested to planar PCBs, and the chinook salmon, domestic chicken, mink, rhesus macaque, and laboratory white rat were among the most sensitive species. for protection of natural resources, most authorities now recommend (1) analyzation of environmental samples for planar and other potentially hazardous congeners; (2) exposure studies with representative species and specific congeners, alone and in combination with other environmental contaminants; (3) clarification of existing structure

PCB 136 Atropselectively Alters Morphometric and Functional Parameters of Neuronal Connectivity in Cultured Rat Hippocampal Neurons via Ryanodine Receptor-Dependent Mechanisms

Science.gov (United States)

Yang, Dongren; Kania-Korwel, Izabela; Ghogha, Atefeh; Chen, Hao; Stamou, Marianna; Bose, Diptiman D.; Pessah, Isaac N.; Lehmler, Hans-Joachim; Lein, Pamela J.

2014-01-01

We recently demonstrated that polychlorinated biphenyl (PCB) congeners with multiple ortho chlorine substitutions sensitize ryanodine receptors (RyRs), and this activity promotes Ca2+-dependent dendritic growth in cultured neurons. Many ortho-substituted congeners display axial chirality, and we previously reported that the chiral congener PCB 136 (2,2′,3,3′,6,6′-hexachlorobiphenyl) atropselectively sensitizes RyRs. Here, we test the hypothesis that PCB 136 atropisomers differentially alter dendritic growth and other parameters of neuronal connectivity influenced by RyR activity. (−)-PCB 136, which potently sensitizes RyRs, enhances dendritic growth in primary cultures of rat hippocampal neurons, whereas (+)-PCB 136, which lacks RyR activity, has no effect on dendritic growth. The dendrite-promoting activity of (−)-PCB 136 is observed at concentrations ranging from 0.1 to 100nM and is blocked by pharmacologic RyR antagonism. Neither atropisomer alters axonal growth or cell viability. Quantification of PCB 136 atropisomers in hippocampal cultures indicates that atropselective effects on dendritic growth are not due to differential partitioning of atropisomers into cultured cells. Imaging of hippocampal neurons loaded with Ca2+-sensitive dye demonstrates that (−)-PCB 136 but not (+)-PCB 136 increases the frequency of spontaneous Ca2+ oscillations. Similarly, (−)-PCB 136 but not (+)-PCB 136 increases the activity of hippocampal neurons plated on microelectrode arrays. These data support the hypothesis that atropselective effects on RyR activity translate into atropselective effects of PCB 136 atropisomers on neuronal connectivity, and suggest that the variable atropisomeric enrichment of chiral PCBs observed in the human population may be a significant determinant of individual susceptibility for adverse neurodevelopmental outcomes following PCB exposure. PMID:24385416

A Novel Design of Frequency Reconfigurable Antenna for UWB Application

Science.gov (United States)

Yang, Xiaolin; Yu, Ziliang; Wu, Zheng; Shen, Huajiao

2016-09-01

In this paper, we present a novel frequency reconfigurable antenna which could be easily operate in a single notched-band (WiMAX (3.3-3.6 GHz)) UWB frequency band, another single notched-band (WLAN (5-6 GHz)) UWB frequency band and the dual band-notched UWB frequency band (the stopband covers the WiMAX (3.3-3.6 GHz) and WLAN (5-6 GHz)). The reconfigurability is achieved by changing the states of PIN diodes. The simulated results are in agreement well with the measured results. And the measured patterns are slightly changed with antenna reconfiguration. The proposed antenna is a good candidate for various UWB applications.

Treatment of a suspension of PCB contaminated soil using iron nanoparticles and electric current

DEFF Research Database (Denmark)

Comes, Helena I.; Ottosen, Lisbeth M.; Ribeiro, Alexandra B.

2015-01-01

Contaminated soils and sediments with polychlorinated biphenyls (PCB) are an important environmental problem due to the persistence of these synthetic aromatic compounds and to the lack of a cost-effective and sustainable remediation technology. Recently, a new experimental setup has been proposed...... using electrodialytic remediation and iron nanoparticles. The current work compares the performance of this new setup (A) with conventional electrokinetics (setup B). An historically contaminated soil with an initial PCB concentration of 258 mu g kg-1 was treated during 5, 10, 20 and 45 d using...... different amounts of iron nanoparticles in both setups A and B. A PCB removal of 83% was obtained in setup A compared with 58% of setup B. Setup A also showed additional advantages, such as a higher PCB dechlorination, in a shorter time, with lower nZVI consumption, and with the use of half of the voltage...

Modular, Reconfigurable, High-Energy Technology Development

Science.gov (United States)

Carrington, Connie; Howell, Joe

2006-01-01

The Modular, Reconfigurable High-Energy (MRHE) Technology Demonstrator project was to have been a series of ground-based demonstrations to mature critical technologies needed for in-space assembly of a highpower high-voltage modular spacecraft in low Earth orbit, enabling the development of future modular solar-powered exploration cargo-transport vehicles and infrastructure. MRHE was a project in the High Energy Space Systems (HESS) Program, within NASA's Exploration Systems Research and Technology (ESR&T) Program. NASA participants included Marshall Space Flight Center (MSFC), the Jet Propulsion Laboratory (JPL), and Glenn Research Center (GRC). Contractor participants were the Boeing Phantom Works in Huntsville, AL, Lockheed Martin Advanced Technology Center in Palo Alto, CA, ENTECH, Inc. in Keller, TX, and the University of AL Huntsville (UAH). MRHE's technical objectives were to mature: (a) lightweight, efficient, high-voltage, radiation-resistant solar power generation (SPG) technologies; (b) innovative, lightweight, efficient thermal management systems; (c) efficient, 100kW-class, high-voltage power delivery systems from an SPG to an electric thruster system; (d) autonomous rendezvous and docking technology for in-space assembly of modular, reconfigurable spacecraft; (e) robotic assembly of modular space systems; and (f) modular, reconfigurable distributed avionics technologies. Maturation of these technologies was to be implemented through a series of increasingly-inclusive laboratory demonstrations that would have integrated and demonstrated two systems-of-systems: (a) the autonomous rendezvous and docking of modular spacecraft with deployable structures, robotic assembly, reconfiguration both during assembly and (b) the development and integration of an advanced thermal heat pipe and a high-voltage power delivery system with a representative lightweight high-voltage SPG array. In addition, an integrated simulation testbed would have been developed

Machine Learning Control For Highly Reconfigurable High-Order Systems

Science.gov (United States)

2015-01-02

calibration and applications,” Mechatronics and Embedded Systems and Applications (MESA), 2010 IEEE/ASME International Conference on, IEEE, 2010, pp. 38–43...AFRL-OSR-VA-TR-2015-0012 MACHINE LEARNING CONTROL FOR HIGHLY RECONFIGURABLE HIGH-ORDER SYSTEMS John Valasek TEXAS ENGINEERING EXPERIMENT STATION...DIMENSIONAL RECONFIGURABLE SYSTEMS FA9550-11-1-0302 Period of Performance 1 July 2011 – 29 September 2014 John Valasek Aerospace Engineering

Effect of seafood mediated PCB exposure on desaturase activity and PUFA profile in Faroese septuagenarians.

Science.gov (United States)

Tøttenborg, Sandra Søgaard; Choi, Anna L; Bjerve, Kristian S; Weihe, Pal; Grandjean, Philippe

2015-07-01

Polychlorinated biphenyl (PCB) exposure may affect serum concentrations of polyunsaturated fatty acids (PUFAs) by inhibiting desaturases ∆5 and ∆6 that drive their synthesis from precursor fatty acids. Such changes in the composition of fatty acids may affect cardiovascular disease risk, which is thought to increase at elevated PCB exposures. This population-based cross-sectional study examined 712 Faroese men and women aged 70-74 years. The serum phospholipid fraction of fasting blood samples was used to determine the PUFA profile, including linoleic acid, dihomo-γ-linolenic acid, arachidonic acid, eicosatrienoic acid, and other relevant fatty acids. Ratios between precursor and metabolite fatty acids were used as proxies for ∆5 and ∆6 desaturase activity. Tertiles of serum-PCB concentrations were used in multiple regression analyses to determine the association between the exposure and desaturase activity. In multiple regression models, PCB exposure was inversely related to the estimated Δ6 desaturase activity resulting in accumulation of precursor fatty acids and decrease in the corresponding product PUFAs. A positive association between PCB and Δ5 desaturation was also found. A relative increase in EA was also observed, though only in the third tertile of PCB exposure. Non-linear relationships between the exposure and the desaturase activity were not found. Consuming fish and seafood may not be translated into beneficial fatty acid profiles if the diet simultaneously causes exposure to PCBs. Although the desaturase estimates were likely influenced by dietary intakes of product PUFAs, the association between PCB exposure and ∆6 desaturase activity is plausible and may affect cardiovascular disease risk. Copyright © 2015 Elsevier Inc. All rights reserved.

In situ application of activated carbon and biochar to PCB-contaminated soil and the effects of mixing regime

International Nuclear Information System (INIS)

Denyes, Mackenzie J.; Rutter, Allison; Zeeb, Barbara A.

2013-01-01

The in situ use of carbon amendments such as activated carbon (AC) and biochar to minimize the bioavailability of organic contaminants is gaining in popularity. In the first in situ experiment conducted at a Canadian PCB-contaminated Brownfield site, GAC and two types of biochar were statistically equal at reducing PCB uptake into plants. PCB concentrations in Cucurbita pepo root tissue were reduced by 74%, 72% and 64%, with the addition of 2.8% GAC, Burt's biochar and BlueLeaf biochar, respectively. A complementary greenhouse study which included a bioaccumulation study of Eisenia fetida (earthworm), found mechanically mixing carbon amendments with PCB-contaminated soil (i.e. 24 h at 30 rpm) resulted in shoot, root and worm PCB concentrations 66%, 59% and 39% lower than in the manually mixed treatments (i.e. with a spade and bucket). Therefore, studies which mechanically mix carbon amendments with contaminated soil may over-estimate the short-term potential to reduce PCB bioavailability. Highlights: •Biochar and GAC reduced PCB uptake into plants and earthworms. •Biochar offered additional benefits, including increased plant and earthworm biomass. •BSAF reductions are greater when amendments are mechanically vs. manually mixed. •Mechanically mixing carbon amendments may over-estimate their remediation potential. -- In situ AC and biochar soil amendments perform equally well at reducing PCB uptake, however, laboratory-based mixing methods may exaggerate the sorptive capacities of both amendments

Design and Evaluation of a Reconfigurable Manufacturing System

DEFF Research Database (Denmark)

Zhang, Shuai; Li, Yang; Bilberg, Arne

2014-01-01

In modern manufacturing industry, reconfigurable manufacturing system (RMS) is a promising concept in the research arena. A new RMS system structure has been recently designed by a large consumer goods manufacturer in Europe, aiming to improve its production efficiency. This article shows...... implemented in this consumer goods manufacturer can be effectively (re)configured as part of the daily operations, and the configuration is analyzed by computer simulation before release. Flexibility can be increased considerably meanwhile the system can maintain an acceptable productivity....

New methods to engineer and seamlessly reconfigure time triggered ethernet based systems during runtime based on the PROFINET IRT example

CERN Document Server

Wisniewski, Lukasz

2017-01-01

The objective of this dissertation is to design a concept that would allow to increase the flexibility of currently available Time Triggered Ethernet based (TTEB) systems, however, without affecting their performance and robustness. The main challenges are related to scheduling of time triggered communication that may take significant amount of time and has to be performed on a powerful platform. Additionally, the reliability has to be considered and kept on the required high level. Finally, the reconfiguration has to be optimally done without affecting the currently running system.

A Framework for Hardware-Accelerated Services Using Partially Reconfigurable SoCs

Directory of Open Access Journals (Sweden)

MACHIDON, O. M.

2016-05-01

Full Text Available The current trend towards ?Everything as a Service? fosters a new approach on reconfigurable hardware resources. This innovative, service-oriented approach has the potential of bringing a series of benefits for both reconfigurable and distributed computing fields by favoring a hardware-based acceleration of web services and increasing service performance. This paper proposes a framework for accelerating web services by offloading the compute-intensive tasks to reconfigurable System-on-Chip (SoC devices, as integrated IP (Intellectual Property cores. The framework provides a scalable, dynamic management of the tasks and hardware processing cores, based on dynamic partial reconfiguration of the SoC. We have enhanced security of the entire system by making use of the built-in detection features of the hardware device and also by implementing active counter-measures that protect the sensitive data.

Histopathology of feral fish from a PCB-contaminated freshwater lake

Energy Technology Data Exchange (ETDEWEB)

Koponen, Kari; Ritola, Ossi; Huuskonen, Sirpa E.; Lindstroem-Seppae, Pirjo [Univ. of Kuopio (Finland). Dept. of Physiology; Myers, Mark S. [National Oceanic and Atmospheric Administration, Seattle, WA (United States). National Marine Fisheries Service

2001-05-01

The purpose of this study was to evaluate the potential toxic effects of chronic sublethal polychlorinated biphenyl (PCB) exposure on feral fish, using histopathology as an endpoint. Histopathological study of bream (Abramis brama) and asp (Aspius aspius) living in a PCB-polluted freshwater lake revealed abnormal cellular changes in the renal corpuscle of both species. Dilation of glomerular capillaries (DGC), mesangial edema (ME), an adhesion between visceral and parietal layers of Bowman's capsule (ABC), and filling of Bowman's space (FBS), were highly prevalent features in lake fish. The prevalence of each of these lesions was significantly lower, or totally absent in fish caught from reference locations. Cellular alterations in liver, gill, gonads, spleen, and intestine were all linked to seasonal changes. The results suggest that some of the observed histopathological changes in renal glomeruli, particularly DGC and ME, could possibly indicate a prolonged chemical stress caused by PCBs and related compounds. It is also possible that chronic PCB exposure may have suppressed and weakened the immuno systems of exposed fish making them more vulnerable to secondary parasitic infection.

Importance of growth rate on Hg and PCB bioaccumulation in fish

Science.gov (United States)

Li, Jiajia; Haffner, G. Douglas; Patterson, Gordon; Walters, David M.; Burtnyk, Michael D.; Drouillard, Ken G.

2018-01-01

To evaluate the effect of fish growth on mercury (Hg) and polychlorinated biphenyls (PCBs) bioaccumulation, a non‐steady state toxicokinetic model, combined with a Wisconsin bioenergetics model, was developed to simulate Hg and PCB bioaccumulation in Bluegill (Lepomis macrochirus). The model was validated by comparing observed versus predicted Hg and PCB 180 concentrations across 5 age classes from five different waterbodies across North America. The non‐steady state model generated accurate predictions for Hg and PCB bioaccumulation in three of five waterbodies: Apsey, Sharbot and Stonelick Lake. The poor performance of the model for the Detroit River and Lake Hartwell, which were two well‐known contaminated sites with possibly high heterogeneity in spatial contamination, was attributed to changes in the feeding behavior and/ or change in prey contamination. Model simulations indicate that growth dilution is a major component of contaminant bioaccumulation patterns in fish especially during early life stages and was predicted to be more important for hydrophobic PCBs compared to Hg. Simulations which considered tissue specific growth provided some improvement in model performance particularly for PCBs in fish populations which exhibited changes in their whole body lipid content with age. Higher variation in lipid growth compared with that of lean dry protein was also observed between different bluegill populations which partially explains the greater variation in PCB bioaccumulation slopes compared with Hg across sampling sites.

Green tea diet decreases PCB 126-induced oxidative stress in mice by up-regulating antioxidant enzymes.

Science.gov (United States)

Newsome, Bradley J; Petriello, Michael C; Han, Sung Gu; Murphy, Margaret O; Eske, Katryn E; Sunkara, Manjula; Morris, Andrew J; Hennig, Bernhard

2014-02-01

Superfund chemicals such as polychlorinated biphenyls pose a serious human health risk due to their environmental persistence and link to multiple diseases. Selective bioactive food components such as flavonoids have been shown to ameliorate PCB toxicity, but primarily in an in vitro setting. Here, we show that mice fed a green tea-enriched diet and subsequently exposed to environmentally relevant doses of coplanar PCB exhibit decreased overall oxidative stress primarily due to the up-regulation of a battery of antioxidant enzymes. C57BL/6 mice were fed a low-fat diet supplemented with green tea extract (GTE) for 12 weeks and exposed to 5 μmol PCB 126/kg mouse weight (1.63 mg/kg-day) on weeks 10, 11 and 12 (total body burden: 4.9 mg/kg). F2-isoprostane and its metabolites, established markers of in vivo oxidative stress, measured in plasma via HPLC-MS/MS exhibited fivefold decreased levels in mice supplemented with GTE and subsequently exposed to PCB compared to animals on a control diet exposed to PCB. Livers were collected and harvested for both messenger RNA and protein analyses, and it was determined that many genes transcriptionally controlled by aryl hydrocarbon receptor and nuclear factor (erythroid-derived 2)-like 2 proteins were up-regulated in PCB-exposed mice fed the green tea-supplemented diet. An increased induction of genes such as SOD1, GSR, NQO1 and GST, key antioxidant enzymes, in these mice (green tea plus PCB) may explain the observed decrease in overall oxidative stress. A diet supplemented with green tea allows for an efficient antioxidant response in the presence of PCB 126, which supports the emerging paradigm that healthful nutrition may be able to bolster and buffer a physiological system against the toxicities of environmental pollutants. Copyright © 2014 Elsevier Inc. All rights reserved.

Reconfigurable engineered motile semiconductor microparticles.

Science.gov (United States)

Ohiri, Ugonna; Shields, C Wyatt; Han, Koohee; Tyler, Talmage; Velev, Orlin D; Jokerst, Nan

2018-05-03

Locally energized particles form the basis for emerging classes of active matter. The design of active particles has led to their controlled locomotion and assembly. The next generation of particles should demonstrate robust control over their active assembly, disassembly, and reconfiguration. Here we introduce a class of semiconductor microparticles that can be comprehensively designed (in size, shape, electric polarizability, and patterned coatings) using standard microfabrication tools. These custom silicon particles draw energy from external electric fields to actively propel, while interacting hydrodynamically, and sequentially assemble and disassemble on demand. We show that a number of electrokinetic effects, such as dielectrophoresis, induced charge electrophoresis, and diode propulsion, can selectively power the microparticle motions and interactions. The ability to achieve on-demand locomotion, tractable fluid flows, synchronized motility, and reversible assembly using engineered silicon microparticles may enable advanced applications that include remotely powered microsensors, artificial muscles, reconfigurable neural networks and computational systems.

Functional verification of dynamically reconfigurable FPGA-based systems

CERN Document Server

Gong, Lingkan

2015-01-01

This book analyzes the challenges in verifying Dynamically Reconfigurable Systems (DRS) with respect to the user design and the physical implementation of such systems. The authors describe the use of a simulation-only layer to emulate the behavior of target FPGAs and accurately model the characteristic features of reconfiguration. Readers are enabled with this simulation-only layer to maintain verification productivity by abstracting away the physical details of the FPGA fabric.  Two implementations of the simulation-only layer are included: Extended ReChannel is a SystemC library that can be used to check DRS designs at a high level; ReSim is a library to support RTL simulation of a DRS reconfiguring both its logic and state. Through a number of case studies, the authors demonstrate how their approach integrates seamlessly with existing, mainstream DRS design flows and with well-established verification methodologies such as top-down modeling and coverage-driven verification. Provides researchers with an i...

RANCANG BANGUN CNC MILLING MACHINEHOME MADE UNTUK MEMBUAT PCB

Directory of Open Access Journals (Sweden)

Dityo Pradana

2011-06-01

Full Text Available Kendala yang dimiliki oleh seorang penggemar elektronik untuk membuat PCB diantaranya adalah efisiensi waktu, tenaga, dan biaya. Pembuatan CNC milling machine merupakan salah satu solusi yang tepat untuk membuat PCB. CNC milling machine adalah mesin bubut otomatis yang bekerja atas dasar perintah Numerical Code. Rancang bangun CNC Milling Machine Home Made ini dikontrol oleh komputer yang akan mengontrol IC L297 melalui parallel port. IC L297 ini kemudian memberikan empat data digital a, b, c dan d untuk mengatur phase IC L298 yang menyalurkan tegangan untuk koil motor stepper unipolar. Pada akhirnya motor stepper unipolar akan memutar baut dan dapat menggerakkan meja sumbu menggunakan prinsip kerja ulir.

Oxidative stress and apoptosis of Carassius auratus lymphocytes induced by nonplanar (PCB153) and coplanar (PCB169) polychlorinated biphenyl congeners in vitro

Institute of Scientific and Technical Information of China (English)

ZHANG Jian-ying; ZHANG Hang-jun; NI Wan-min

2009-01-01

and the coplanar congener was more cytotoxic than nonplanar congener. This study suggests that cytotoxicity mechanisms of the PCB congeners on fish lymphocytes depend on their planarity and chemical structures.

Reconfigurable Wave Velocity Transmission Lines for Phased Arrays

Science.gov (United States)

Host, Nick; Chen, Chi-Chih; Volakis, John L.; Miranda, Felix

2013-01-01

Phased array antennas showcase many advantages over mechanically steered systems. However, they are also more complex, heavy and most importantly costly. This presentation paper presents a concept which overcomes these detrimental attributes by eliminating all of the phase array backend (including phase shifters). Instead, a wave velocity reconfigurable transmission line is used in a series fed array arrangement to allow phase shifting with one small (100mil) mechanical motion. Different configurations of the reconfigurable wave velocity transmission line are discussed and simulated and experimental results are presented.

Design of low-power coarse-grained reconfigurable architectures

CERN Document Server

Kim, Yoonjin

2010-01-01

Coarse-grained reconfigurable architecture (CGRA) has emerged as a solution for flexible, application-specific optimization of embedded systems. Helping you understand the issues involved in designing and constructing embedded systems, Design of Low-Power Coarse-Grained Reconfigurable Architectures offers new frameworks for optimizing the architecture of components in embedded systems in order to decrease area and save power. Real application benchmarks and gate-level simulations substantiate these frameworks.The first half of the book explains how to reduce power in the configuration cache. T

PCDD/F and dioxin-like PCB in human blood and milk from German mothers

Energy Technology Data Exchange (ETDEWEB)

Wittsiepe, J.; Schrey, P.; Lemm, F.; Wilhelm, M. [Ruhr-Univ. Bochum, Abt. fuer Hygiene, Sozial- und Umweltmedizin (Germany); Fuerst, P. [Chemisches Landes- und Staatliches Veterinaeruntersuchungsamt, Muenster (Germany); Kraft, M. [Ministerium fuer Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes Nordrhein-Westfalen, Duesseldorf (Germany); Eberwein, G. [Landesumweltamt Nordrhein-Westfalen, Essen (Germany); Winneke, G. [Medizinisches Inst. fuer Umwelthygiene an der Heinrich-Heine Univ. Duesseldorf (Germany)

2004-09-15

Human biomonitoring of polychlorinated dibenzo-p-dioxins and dibenzofuranes (PCDD/F) and polychlorinated biphenyls (PCB) is done by analyzing both blood and milk samples. With reference to calculation of Toxicity Equivalents (TEq) as published by the World Health Organization (WHO) in 1998 determination of 17 PCDD/F congeners together with 4 non- and 8 mono-ortho PCB congeners is the preferred method. In contrast to data on PCDD/F only little is known on background levels of dioxin-like PCB in human blood or milk samples. In the present study we report on PCDD/F and PCB levels in human blood samples of pregnant women living in an industrialized area of Germany and of human milk samples from the same women taken in the first weeks after birth. The investigations demonstrate the current background levels found in Germany, make a contribution for the assessment of preand postnatal exposure of infants and show correlations between the two matrices.

Distributed sensor and actuator reconfiguration for fault-tolerant networked control systems

NARCIS (Netherlands)

Herdeiro Teixeira, A.M.; Araujo, Jose; Sandberg, Henrik; Johansson, Karl H.

2017-01-01

In this paper, we address the problem of distributed reconfiguration of networked control systems upon the removal of misbehaving sensors and actuators. In particular, we consider systems with redundant sensors and actuators cooperating to recover from faults. Reconfiguration is performed while

A Virtual Commissioning Learning Platform

DEFF Research Database (Denmark)

Mortensen, Steffen; Madsen, Ole

2018-01-01

The introduction of reconfigurable manufacturing systems (RMS), Industry 4.0 and the associated technologies requires the establishment of new competencies. Towards that goal, Aalborg University (AAU) has developed an Industry 4.0 learning factory, the AAU Smart Production Lab. The AAU Smart...... Production Lab integrates a number of Industry 4.0 technologies for learning and research purposes. One of the many techniques is virtual commissioning. Virtual commissioning uses a virtual plant model and real controllers (PLCs) enabling a full emulation of the manufacturing system for verification. Virtual...... commissioning can lower the commissioning time up to 63%, allowing faster time to market. However, virtual commission is still missing industrial impact one of the reasons being lack of competencies and integration experiences. The paper presents the setup of the virtual commissioning learning platform...

Molecular interaction of PCB153 to human serum albumin: Insights from spectroscopic and molecular modeling studies

Energy Technology Data Exchange (ETDEWEB)

Han, Chao; Fang, Senbiao; Cao, Huiming; Lu, Yan; Ma, Yaqiong [School of Pharmacy, Lanzhou University, Lanzhou 730000 (China); Wei, Dongfeng [Institute of Basic Research in Clinical Medicine, China Academy of Chinese Medical Sciences, Beijing 100700 (China); Xie, Xiaoyun [College of Earth and Environmental Science, Lanzhou University, Lanzhou 730000 (China); Liu, Xiaohua [School of Pharmacy, Lanzhou University, Lanzhou 730000 (China); Li, Xin [College of Food and Bioengineering, Henan University of Science and Technology, Luoyang 471003 (China); Fei, Dongqing [School of Pharmacy, Lanzhou University, Lanzhou 730000 (China); Zhao, Chunyan, E-mail: zhaochy07@lzu.edu.cn [School of Pharmacy, Lanzhou University, Lanzhou 730000 (China)

2013-03-15

Highlights: ► We identify the binding mode of PCB153 to human serum albumin (HSA). ► Spectroscopic and molecular modeling results reveal that PCB153 binds at the site II. ► The interaction is mainly governed by hydrophobic and hydrogen bond forces. ► The work helps to probe transporting, distribution and toxicity effect of PCBs. -- Abstract: Polychlorinated biphenyls (PCBs) possessed much potential hazard to environment because of its chemical stability and biological toxicity. Here, we identified the binding mode of a representative compound, PCB153, to human serum albumin (HSA) using fluorescence and molecular dynamics simulation methods. The fluorescence study showed that the intrinsic fluorescence of HSA was quenched by addition of PCB153 through a static quenching mechanism. The thermodynamic analysis proved the binding behavior was mainly governed by hydrophobic force. Furthermore, as evidenced by site marker displacement experiments using two probe compounds, it revealed that PCB153 acted exactly on subdomain IIIA (site II) of HSA. On the other hand, the molecular dynamics studies as well as free energy calculations made another important contribution to understand the conformational changes of HSA and the stability of HSA-PCB153 system. Molecular docking revealed PCB153 can bind in a large hydrophobic activity of subdomain IIIA by the hydrophobic interaction and hydrogen bond interactions between chlorine atoms and residue ASN391. The present work provided reasonable models helping us further understand the transporting, distribution and toxicity effect of PCBs when it spread into human blood serum.

Evaluation of PCB sources and releases for identifying priorities to reduce PCBs in Washington State (USA).

Science.gov (United States)

Davies, Holly; Delistraty, Damon

2016-02-01

Polychlorinated biphenyls (PCBs) are ubiquitously distributed in the environment and produce multiple adverse effects in humans and wildlife. As a result, the purpose of our study was to characterize PCB sources in anthropogenic materials and releases to the environment in Washington State (USA) in order to formulate recommendations to reduce PCB exposures. Methods included review of relevant publications (e.g., open literature, industry studies and reports, federal and state government databases), scaling of PCB sources from national or county estimates to state estimates, and communication with industry associations and private and public utilities. Recognizing high associated uncertainty due to incomplete data, we strived to provide central tendency estimates for PCB sources. In terms of mass (high to low), PCB sources include lamp ballasts, caulk, small capacitors, large capacitors, and transformers. For perspective, these sources (200,000-500,000 kg) overwhelm PCBs estimated to reside in the Puget Sound ecosystem (1500 kg). Annual releases of PCBs to the environment (high to low) are attributed to lamp ballasts (400-1500 kg), inadvertent generation by industrial processes (900 kg), caulk (160 kg), small capacitors (3-150 kg), large capacitors (10-80 kg), pigments and dyes (0.02-31 kg), and transformers (PCB distribution and decrease exposures include assessment of PCBs in buildings (e.g., schools) and replacement of these materials, development of Best Management Practices (BMPs) to contain PCBs, reduction of inadvertent generation of PCBs in consumer products, expansion of environmental monitoring and public education, and research to identify specific PCB congener profiles in human tissues.

Developmental PCB Exposure Increases Audiogenic Seizures and Decreases Glutamic Acid Decarboxylase in the Inferior Colliculus.

Science.gov (United States)

Bandara, Suren B; Eubig, Paul A; Sadowski, Renee N; Schantz, Susan L

2016-02-01

Previously, we observed that developmental polychlorinated biphenyl (PCB) exposure resulted in an increase in audiogenic seizures (AGSs) in rats. However, the rats were exposed to loud noise in adulthood, and were not tested for AGS until after 1 year of age, either of which could have interacted with early PCB exposure to increase AGS susceptibility. This study assessed susceptibility to AGS in young adult rats following developmental PCB exposure alone (without loud noise exposure) and investigated whether there was a decrease in GABA inhibitory neurotransmission in the inferior colliculus (IC) that could potentially explain this effect. Female Long-Evans rats were dosed orally with 0 or 6 mg/kg/day of an environmentally relevant PCB mixture from 28 days prior to breeding until the pups were weaned at postnatal day 21. One male-female pair from each litter was retained for the AGS study whilst another was retained for Western blot analysis of glutamic acid decarboxylase (GAD) and GABAAα1 receptor in the IC, the site in the auditory midbrain where AGS are initiated. There was a significant increase in the number and severity of AGSs in the PCB groups, with females somewhat more affected than males. GAD65 was decreased but there was no change in GAD67 or GABAAα1 in the IC indicating decreased inhibitory regulation in the PCB group. These results confirm that developmental PCB exposure alone is sufficient to increase susceptibility to AGS, and provide the first evidence for a possible mechanism of action at the level of the IC. © The Author 2015. Published by Oxford University Press on behalf of the Society of Toxicology. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Reconfigurable dual-band metamaterial antenna based on liquid crystals

Science.gov (United States)

Che, Bang-Jun; Meng, Fan-Yi; Lyu, Yue-Long; Wu, Qun

2018-05-01

In this paper, a novel reconfigurable dual-band metamaterial antenna with a continuous beam that is electrically steered in backward to forward directions is first proposed by employing a liquid crystal (LC)-loaded tunable extended composite right-/left-handed (E-CRLH) transmission line (TL). The frequency-dependent property of the E-CRLH TL is analyzed and a compact unit cell based on the nematic LC is proposed to realize the tunable dual band characteristics. The phase constant of the proposed unit cell can be dynamically continuously tuned from negative to positive values in two operating bands by changing the bias voltage of the loaded LC material. A resulting dual band fixed-frequency beam steering property has been predicted by numerical simulations and experimentally verified. The measured results show that the fabricated reconfigurable antenna features an electrically controlled continuous beam steering from backward  ‑16° to forward  +13° at 7.2 GHz and backward  ‑9° to forward  +17° at 9.4 GHz, respectively. This electrically controlled beam steering range turns out to be competitive with the previously reported single band reconfigurable antennas. Besides, the measured and simulated results of the proposed reconfigurable dual-band metamaterial antenna are in good agreement.

Reconfigurable Radio Access Unit for DWDM to W-Band Wireless Conversion

DEFF Research Database (Denmark)

Chorchos, Łukasz; Rommel, Simon; Turkiewicz, Jarosław P.

2017-01-01

In this letter a reconfigurable Remote Access Unit (RAU) is proposed and demonstrated, interfacing dense wavelength division multiplexed (DWDM) optical and W-band wireless links. The RAU is composed of a tunable local oscillator, a narrow optical filter and a control unit, making it reconfigurable...

A dynamic and mechanistic model of PCB bioaccumulation in the European hake ( Merluccius merluccius)

Science.gov (United States)

Bodiguel, Xavier; Maury, Olivier; Mellon-Duval, Capucine; Roupsard, François; Le Guellec, Anne-Marie; Loizeau, Véronique

2009-08-01

Bioaccumulation is difficult to document because responses differ among chemical compounds, with environmental conditions, and physiological processes characteristic of each species. We use a mechanistic model, based on the Dynamic Energy Budget (DEB) theory, to take into account this complexity and study factors impacting accumulation of organic pollutants in fish through ontogeny. The bioaccumulation model proposed is a comprehensive approach that relates evolution of hake PCB contamination to physiological information about the fish, such as diet, metabolism, reserve and reproduction status. The species studied is the European hake ( Merluccius merluccius, L. 1758). The model is applied to study the total concentration and the lipid normalised concentration of 4 PCB congeners in male and female hakes from the Gulf of Lions (NW Mediterranean sea) and the Bay of Biscay (NE Atlantic ocean). Outputs of the model compare consistently to measurements over the life span of fish. Simulation results clearly demonstrate the relative effects of food contamination, growth and reproduction on the PCB bioaccumulation in hake. The same species living in different habitats and exposed to different PCB prey concentrations exhibit marked difference in the body accumulation of PCBs. At the adult stage, female hakes have a lower PCB concentration compared to males for a given length. We successfully simulated these sex-specific PCB concentrations by considering two mechanisms: a higher energy allocation to growth for females and a transfer of PCBs from the female to its eggs when allocating lipids from reserve to eggs. Finally, by its mechanistic description of physiological processes, the model is relevant for other species and sets the stage for a mechanistic understanding of toxicity and ecological effects of organic contaminants in marine organisms.

Effect of seafood mediated PCB exposure on desaturase activity and PUFA profile in Faroese septuagenarians

DEFF Research Database (Denmark)

Tøttenborg, Sandra Søgaard; Choi, Anna L; Bjerve, Kristian S

2015-01-01

and desaturase activity. In multiple regression models, PCB exposure was inversely related to the estimated Δ6 desaturase activity resulting in accumulation of precursor fatty acids and decrease in the corresponding product PUFAs. A positive association between PCB and Δ5 desaturation was also found. A relative...... increase in EA was also observed, though only in the third tertile of PCB exposure. Non-linear relationships between the exposure and the desaturase activity were not found. Consuming fish and seafood may not be translated into beneficial fatty acid profiles if the diet simultaneously causes exposure...

A Novel Docking System for Modular Self-Reconfigurable Robots

Directory of Open Access Journals (Sweden)

Tan Zhang

2017-10-01

Full Text Available Existing self-reconfigurable robots achieve connections and disconnections by a separate drive of the docking system. In this paper, we present a new docking system with which the connections and disconnections are driven by locomotion actuators, without the need for a separate drive, which reduces the weight and the complexity of the modules. This self-reconfigurable robot consists of two types of fundamental modules, i.e., active and passive modules. By the docking system, two types of connections are formed with the fundamental modules, and the docking and undocking actions are achieved through simple control with less sensory feedback. This paper describes the design of the robotic modules, the docking system, the docking process, and the docking force analysis. An experiment is performed to demonstrate the self-reconfigurable robot with the docking system.

Experiencing a Problem-Based Learning Approach for Teaching Reconfigurable Architecture Design

Directory of Open Access Journals (Sweden)

Erwan Fabiani

2009-01-01

Full Text Available This paper presents the “reconfigurable computing” teaching part of a computer science master course (first year on parallel architectures. The practical work sessions of this course rely on active pedagogy using problem-based learning, focused on designing a reconfigurable architecture for the implementation of an application class of image processing algorithms. We show how the successive steps of this project permit the student to experiment with several fundamental concepts of reconfigurable computing at different levels. Specific experiments include exploitation of architectural parallelism, dataflow and communicating component-based design, and configurability-specificity tradeoffs.

An Embedded Reconfigurable Logic Module

Science.gov (United States)

Tucker, Jerry H.; Klenke, Robert H.; Shams, Qamar A. (Technical Monitor)

2002-01-01

A Miniature Embedded Reconfigurable Computer and Logic (MERCAL) module has been developed and verified. MERCAL was designed to be a general-purpose, universal module that that can provide significant hardware and software resources to meet the requirements of many of today's complex embedded applications. This is accomplished in the MERCAL module by combining a sub credit card size PC in a DIMM form factor with a XILINX Spartan I1 FPGA. The PC has the ability to download program files to the FPGA to configure it for different hardware functions and to transfer data to and from the FPGA via the PC's ISA bus during run time. The MERCAL module combines, in a compact package, the computational power of a 133 MHz PC with up to 150,000 gate equivalents of digital logic that can be reconfigured by software. The general architecture and functionality of the MERCAL hardware and system software are described.

Serum PCB profiles in Native Americans from Wisconsin based on region, diet, age, and gender: Implications for epidemiology studies

International Nuclear Information System (INIS)

Schaeffer, David J.; Dellinger, John A.; Needham, Larry L.; Hansen, Larry G.

2006-01-01

Background: Different PCB congeners and different mixtures of congeners have been demonstrated to have different biological actions. More complete characterization of congener profiles in exposure sources may assist in predicting health outcomes. Methods: Thirty-six (36) polychlorinated biphenyl (PCB) congeners were measured by gas chromatography isotope-dilution mass spectrometry (IDMS) in 314 serum samples from Native Americans in Wisconsin, Michigan and Minnesota. Five dietary groups were established based on the quantity and species of fish consumed and the waters from which the fish were caught. Multivariate statistical methods were able to resolve gender and dietary differences in PCB homologue and PCB congener patterns. Results: Females had higher proportions of lower chlorinated homologues, including a consistently higher proportion of pentaCB 118. The relative presence of the very labile and volatile PCB 18, above 1% of the total PCB in females from the minimal fish consumption and 'other' groups, suggests possible exposure to PCBs in the atmosphere. The dietary group consuming predatory fishes from Lakes Michigan and Superior had the highest serum concentrations of total PCB (mean of 3.1 ng/ml) and the most distinct congener profile. The two dietary groups least dependent on fishing or fishing mostly from inland lakes (non-Great Lakes) had the lowest total PCB concentrations, both with means of 1.4 ng/ml. Conclusions: These serum PCB concentrations were less than those found in earlier studies of fish consumers in the Great Lakes region and may reflect the decrease in PCBs in these lakes

Reconfigurable remote access unit for W-band Radio-over-Fiber transmission

DEFF Research Database (Denmark)

Chorchos, Łukasz; Rommel, Simon; Turkiewicz, Jarosław P.

2016-01-01

There is a growing demand for cost-effective radio over fibre transmission techniques. In this paper, we propose and realize the reconfigurable remote access unit for radio-over-fiber transmission. The reconfigurable unit is build from the tunable filter and laser as well as remote controller...

1993 Annual PCB Document for Los Alamos National Laboratory EPA Region VI, January 1, 1993 through December 31, 1993

International Nuclear Information System (INIS)

Wechsler, R.J.; Sandoval, T.M.; Bryant, D.E.; Hupke, L.; Esquibel, L.

1995-01-01

This document, the open-quotes 1993 Annual PCB Document for Los Alamos National Laboratoryclose quotes was prepared to fulffill the requirements of the federal PCB (Polychlorinated Biphenyl) regulation: 40 CFR 761 Subpart J General Records and Reports. The PCB Management Program at Los Alamos National Laboratory (LANL), Environmental Protection Group, compiled this 1993 Annual PCB Document. The overall format generally follows the sequence of the applicable regulations. Subsection 1.2 cross references those regulatory requirements with the applicable Document Section. The scope of this document also includes status summaries of various aspects of LANL's PCB Management Program. The intent of this approach to the Annual Document is to provide an overview of LANL's PCB Management Program and to increase the usefulness of this document as a management tool. Section 2.0, open-quotes Status of the PCB Management Programclose quotes, discusses the use, generation of waste, and storage of PCBs at LANL. Section 3.0 is the 1993 Annual Document Log required by 761.180(a). This Section also discusses the PCB Management Program's policies for reporting under those regulatory requirements. Sections 4.0 and 5.0 contain the 1993 Annual Records for off-site and on-site disposal as required by 761.180(b). There is a tab for each manifest and its associated continuation sheets, receipt letters, and certificates of disposal

Materials challenges for repeatable RF wireless device reconfiguration with microfluidic channels

Science.gov (United States)

Griffin, Anthony S.; Sottos, Nancy R.; White, Scott R.

2018-03-01

Recently, adaptive wireless devices have utilized displacement of EGaIn within microchannels as an electrical switching mechanism to enable reconfigurable electronics. Device reconfiguration using EGaIn in microchannels overcomes many challenges encountered by more traditional reconfiguration mechanisms such as diodes and microelectromechanical systems (MEMS). Reconfiguration using EGaIn is severely limited by undesired permanent shorting due to retention of the liquid in microchannels caused by wetting and rapid oxide skin formation. Here, we investigate the conditions which prevent repeatable electrical switching using EGaIn in microchannels. Initial contact angle tests of EGaIn on epoxy surfaces demonstrate the wettability of EGaIn on flat surfaces. SEM cross-sections of microchannels reveal adhesion of EGaIn residue to channel walls. Micro-computed tomography (microCT) scans of provide volumetric measurements of EGaIn remaining inside channels after flow cycling. Non-wetting coatings are proposed as materials based strategy to overcome these issues in future work.

Reconfigurable multiport EPON repeater

Science.gov (United States)

Oishi, Masayuki; Inohara, Ryo; Agata, Akira; Horiuchi, Yukio

2009-11-01

An extended reach EPON repeater is one of the solutions to effectively expand FTTH service areas. In this paper, we propose a reconfigurable multi-port EPON repeater for effective accommodation of multiple ODNs with a single OLT line card. The proposed repeater, which has multi-ports in both OLT and ODN sides, consists of TRs, BTRs with the CDR function and a reconfigurable electrical matrix switch, can accommodate multiple ODNs to a single OLT line card by controlling the connection of the matrix switch. Although conventional EPON repeaters require full OLT line cards to accommodate subscribers from the initial installation stage, the proposed repeater can dramatically reduce the number of required line cards especially when the number of subscribers is less than a half of the maximum registerable users per OLT. Numerical calculation results show that the extended reach EPON system with the proposed EPON repeater can save 17.5% of the initial installation cost compared with a conventional repeater, and can be less expensive than conventional systems up to the maximum subscribers especially when the percentage of ODNs in lightly-populated areas is higher.

A Message-Passing Hardware/Software Cosimulation Environment for Reconfigurable Computing Systems

Directory of Open Access Journals (Sweden)

Manuel Saldaña

2009-01-01

Full Text Available High-performance reconfigurable computers (HPRCs provide a mix of standard processors and FPGAs to collectively accelerate applications. This introduces new design challenges, such as the need for portable programming models across HPRCs and system-level verification tools. To address the need for cosimulating a complete heterogeneous application using both software and hardware in an HPRC, we have created a tool called the Message-passing Simulation Framework (MSF. We have used it to simulate and develop an interface enabling an MPI-based approach to exchange data between X86 processors and hardware engines inside FPGAs. The MSF can also be used as an application development tool that enables multiple FPGAs in simulation to exchange messages amongst themselves and with X86 processors. As an example, we simulate a LINPACK benchmark hardware core using an Intel-FSB-Xilinx-FPGA platform to quickly prototype the hardware, to test the communications. and to verify the benchmark results.

A game-theoretic formulation of the homogeneous self-reconfiguration problem

KAUST Repository

Pickem, Daniel; Egerstedt, Magnus; Shamma, Jeff S.

2015-01-01

In this paper we formulate the homogeneous two- and three-dimensional self-reconfiguration problem over discrete grids as a constrained potential game. We develop a game-theoretic learning algorithm based on the Metropolis-Hastings algorithm that solves the self-reconfiguration problem in a globally optimal fashion. Both a centralized and a fully decentralized algorithm are presented and we show that the only stochastically stable state is the potential function maximizer, i.e. the desired target configuration. These algorithms compute transition probabilities in such a way that even though each agent acts in a self-interested way, the overall collective goal of self-reconfiguration is achieved. Simulation results confirm the feasibility of our approach and show convergence to desired target configurations.

A game-theoretic formulation of the homogeneous self-reconfiguration problem

KAUST Repository

Pickem, Daniel

2015-12-15

In this paper we formulate the homogeneous two- and three-dimensional self-reconfiguration problem over discrete grids as a constrained potential game. We develop a game-theoretic learning algorithm based on the Metropolis-Hastings algorithm that solves the self-reconfiguration problem in a globally optimal fashion. Both a centralized and a fully decentralized algorithm are presented and we show that the only stochastically stable state is the potential function maximizer, i.e. the desired target configuration. These algorithms compute transition probabilities in such a way that even though each agent acts in a self-interested way, the overall collective goal of self-reconfiguration is achieved. Simulation results confirm the feasibility of our approach and show convergence to desired target configurations.

The effect of ventilation on the indoor air concentration of PCB

DEFF Research Database (Denmark)

Lyng, Nadja; Gunnarsen, Lars Bo; Andersen, Helle Vibeke

2015-01-01

The impact of increased ventilation on polychlorinated biphenyl (PCB) air concentration by installation of mechanical balanced ventilation units was studied. The intervention was carried out in three PCB-contaminated rooms; one classroom in an elementary school and two small bedrooms...... in an apartment in a residential building. In the classroom, the air exchange rate (ACH) was raised from 0.2 (without mechanical ventilation) to 5.5 /h during the intervention. In the two bedrooms, the highest ACH was 6.6 /h and 0.5 /h without mechanical ventilation. The corresponding concentration decrease...

Design and Fabrication of a Reconfigurable MEMS-Based Antenna

KAUST Repository

Martinez, Miguel Angel Galicia

2011-06-22

This thesis presents the design and fabrication of a customized in house Micro-Electro-Mechanical-Systems (MEMS) process based on-chip antenna that is both frequency and polarization reconfigurable. It is designed to work at both 60 GHz and 77 GHz through MEMS switches. This antenna can also work in both horizontal and vertical linear polarizations by utilizing a moveable plate. The design is intended for Wireless Personal Area Networks (WPAN) and automotive radar applications. Typical on-chip antennas are inefficient and difficult to reconfigure. Therefore, the focus of this work is to develop an efficient on-chip antenna solution, which is reconfigurable in frequency and in polarization. A fractal bowtie antenna is employed for this thesis, which achieves frequency reconfigurability through MEMS switches. The design is simulated in industry standard Electromagnetic (EM) simulator Ansoft HFSS. A novel concept for horizontal to vertical linear polarization agility is introduced which incorporates a moveable polymer plate. For this work, a microprobe is used to move the plate from the horizontal to vertical position. For testing purposes, a novel mechanism has been designed in order to feed the antenna with RF-probes in both horizontal and vertical positions. A simulated gain of approximately 0 dB is achieved at both target frequencies (60 and 77 GHz), in both horizontal and vertical positions. In all the cases mentioned above (both frequencies and positions), the antenna is well matched (< -10 dB) to the 50 Ω system impedance. Similarly, the radiation nulls are successfully shifted by changing the position of the antenna from horizontal to vertical. The complete design and fabrication of the reconfigurable MEMS antenna has been done at KAUST facilities. Some challenges have been encountered during its realization due to the immaturity of the customized MEMS fabrication process. Nonetheless, a first fabrication attempt has highlighted such shortcomings. According

Application of a Bimetallic Treatment System (BTS) for PCB Removal from Older Structures on DoD Facilities

Science.gov (United States)

2010-11-05

Umbilical Tower at KSC. Additionally, main engine test stands at Marshall Space Flight Center (MSFC) were tested for PCB removal and destruction using...test stands at Marshall Space Flight Center (MSFC) were tested for PCB removal and destruction using BTS. The original BTS formulation developed...as on an island , or in the arctic. All the scenarios evaluated in the costs model have assumed the treatment of PCB -containing materials down to

Toxicological profile of ultrapure 2,2',3,4,4',5,5'-heptachlorbiphenyl (PCB 180) in adult rats.

Science.gov (United States)

Viluksela, Matti; Heikkinen, Päivi; van der Ven, Leo T M; Rendel, Filip; Roos, Robert; Esteban, Javier; Korkalainen, Merja; Lensu, Sanna; Miettinen, Hanna M; Savolainen, Kari; Sankari, Satu; Lilienthal, Hellmuth; Adamsson, Annika; Toppari, Jorma; Herlin, Maria; Finnilä, Mikko; Tuukkanen, Juha; Leslie, Heather A; Hamers, Timo; Hamscher, Gerd; Al-Anati, Lauy; Stenius, Ulla; Dervola, Kine-Susann; Bogen, Inger-Lise; Fonnum, Frode; Andersson, Patrik L; Schrenk, Dieter; Halldin, Krister; Håkansson, Helen

2014-01-01

PCB 180 is a persistent non-dioxin-like polychlorinated biphenyl (NDL-PCB) abundantly present in food and the environment. Risk characterization of NDL-PCBs is confounded by the presence of highly potent dioxin-like impurities. We used ultrapure PCB 180 to characterize its toxicity profile in a 28-day repeat dose toxicity study in young adult rats extended to cover endocrine and behavioral effects. Using a loading dose/maintenance dose regimen, groups of 5 males and 5 females were given total doses of 0, 3, 10, 30, 100, 300, 1000 or 1700 mg PCB 180/kg body weight by gavage. Dose-responses were analyzed using benchmark dose modeling based on dose and adipose tissue PCB concentrations. Body weight gain was retarded at 1700 mg/kg during loading dosing, but recovered thereafter. The most sensitive endpoint of toxicity that was used for risk characterization was altered open field behavior in females; i.e. increased activity and distance moved in the inner zone of an open field suggesting altered emotional responses to unfamiliar environment and impaired behavioral inhibition. Other dose-dependent changes included decreased serum thyroid hormones with associated histopathological changes, altered tissue retinoid levels, decreased hematocrit and hemoglobin, decreased follicle stimulating hormone and luteinizing hormone levels in males and increased expression of DNA damage markers in liver of females. Dose-dependent hypertrophy of zona fasciculata cells was observed in adrenals suggesting activation of cortex. There were gender differences in sensitivity and toxicity profiles were partly different in males and females. PCB 180 adipose tissue concentrations were clearly above the general human population levels, but close to the levels in highly exposed populations. The results demonstrate a distinct toxicological profile of PCB 180 with lack of dioxin-like properties required for assignment of WHO toxic equivalency factor. However, PCB 180 shares several toxicological

Hepatic Metabolism Affects the Atropselective Disposition of 2,2′,3,3′,6,6′-Hexachlorobiphenyl (PCB 136) in Mice

Science.gov (United States)

2015-01-01

To understand the role of hepatic vs extrahepatic metabolism in the disposition of chiral PCBs, we studied the disposition of 2,2′,3,3′,6,6′-hexachlorobiphenyl (PCB 136) and its hydroxylated metabolites (HO-PCBs) in mice with defective hepatic metabolism due to the liver-specific deletion of cytochrome P450 oxidoreductase (KO mice). Female KO and congenic wild type (WT) mice were treated with racemic PCB 136, and levels and chiral signatures of PCB 136 and HO-PCBs were determined in tissues and excreta 3 days after PCB administration. PCB 136 tissue levels were higher in KO compared to WT mice. Feces was a major route of PCB metabolite excretion, with 2,2′,3,3′,6,6′-hexachlorobiphenyl-5-ol being the major metabolite recovered from feces. (+)-PCB 136, the second eluting PCB 136 atropisomers, was enriched in all tissues and excreta. The second eluting atropisomers of the HO-PCBs metabolites were enriched in blood and liver; 2,2′,3,3′,6,6′-hexachlorobiphenyl-5-ol in blood was an exception and displayed an enrichment of the first eluting atropisomers. Fecal HO-PCB levels and chiral signatures changed with time and differed between KO and WT mice, with larger HO-PCB enantiomeric fractions in WT compared to KO mice. Our results demonstrate that hepatic and, possibly, extrahepatic cytochrome P450 (P450) enzymes play a role in the disposition of PCBs. PMID:25420130

A reconfigurable strategy for distributed digital process control

International Nuclear Information System (INIS)

Garcia, H.E.; Ray, A.; Edwards, R.M.

1990-01-01

A reconfigurable control scheme is proposed which, unlike a preprogrammed one, uses stochastic automata to learn the current operating status of the environment (i.e., the plant, controller, and communication network) by dynamically monitoring the system performance and then switching to the appropriate controller on the basis of these observations. The potential applicability of this reconfigurable control scheme to electric power plants is being investigated. The plant under consideration is the Experimental Breeder Reactor (EBR-II) at the Argonne National Laboratory site in Idaho. The distributed control system is emulated on a ring network where the individual subsystems are hosted as follows: (1) the reconfigurable control modules are located in one of the network modules called Multifunction Controller; (2) the learning modules are resident in a VAX 11/785 mainframe computer; and (3) a detailed model of the plant under control is executed in the same mainframe. This configuration is a true representation of the network-based control system in the sense that it operates in real time and is capable of interacting with the actual plant

Beyond Open Source Software: Solving Common Library Problems Using the Open Source Hardware Arduino Platform

Directory of Open Access Journals (Sweden)

Jonathan Younker

2013-06-01

Full Text Available Using open source hardware platforms like the Arduino, libraries have the ability to quickly and inexpensively prototype custom hardware solutions to common library problems. The authors present the Arduino environment, what it is, what it does, and how it was used at the James A. Gibson Library at Brock University to create a production portable barcode-scanning utility for in-house use statistics collection as well as a prototype for a service desk statistics tabulation program’s hardware interface.

Analysis of Reconfigured Control Loop with a Virtual Actuator

Directory of Open Access Journals (Sweden)

Anna Filasova

2011-01-01

Full Text Available Control reconfiguration changes the control structure in response to a fault detected in the plant. This becomes necessary, because a major fault like loss of an actuator breaks the corresponding control loop and therefore renders the whole system inoperable.  An important aim of control reconfiguration is to change the control structure as little as possible, since every change bears the potential of practical problems. The proposed solution is to keep the original controller in the loop and to add an extension called virtual actuator that implements the necessary changes of the control structure. The virtual actuator translates between the signals of the nominal controller and the signal of the faulty plants. This paper is concerned with the analysis of reconfigured loop with a virtual actuator for the system with the faulty actuator. The proposed analysis is illustrated on numerical example.

A Method for Design of Modular Reconfigurable Machine Tools

Directory of Open Access Journals (Sweden)

Zhengyi Xu

2017-02-01

Full Text Available Presented in this paper is a method for the design of modular reconfigurable machine tools (MRMTs. An MRMT is capable of using a minimal number of modules through reconfiguration to perform the required machining tasks for a family of parts. The proposed method consists of three steps: module identification, module determination, and layout synthesis. In the first step, the module components are collected from a family of general-purpose machines to establish a module library. In the second step, for a given family of parts to be machined, a set of needed modules are selected from the module library to construct a desired reconfigurable machine tool. In the third step, a final machine layout is decided though evaluation by considering a number of performance indices. Based on this method, a software package has been developed that can design an MRMT for a given part family.

Indirect Evidence Link PCB Dehalogenation with Geobacteraceae in Anaerobic Sediment-Free Microcosms.

Science.gov (United States)

Praveckova, Martina; Brennerova, Maria V; Holliger, Christof; De Alencastro, Felippe; Rossi, Pierre

2016-01-01

Although polychlorinated biphenyls (PCBs) production was brought to a halt 30 years ago, recalcitrance to degradation makes them a major environmental pollutant at a global scale. Previous studies confirmed that organohalide-respiring bacteria (OHRB) were capable of utilizing chlorinated congeners as electron acceptor. OHRB belonging to the Phyla Chloroflexi and Firmicutes are nowadays considered as the main PCB-dechlorinating organisms. In this study, we aimed at exploring the involvement of other taxa in PCB dechlorination using sediment-free microcosms (SFMs) and the Delor PCB mixture. High rates of congener dehalogenation (up to 96%) were attained in long-term incubations of up to 692 days. Bacterial communities were dominated by Chloroflexi, Proteobacteria, and Firmicutes, among strictly simplified community structures composed of 12 major phyla only. In a first batch of SFMs, Dehalococcoides mccartyi closely affiliated with strains CG4 and CBDB1 was considered as the main actor associated with congener dehalogenation. Addition of 2-bromoethanesulfonate (BES), a known inhibitor of methanogenic activity in a second batch of SFMs had an adverse effect on the abundance of Dehalococcoides sp. Only two sequences affiliated to this Genus could be detected in two (out of six) BES-treated SFMs, contributing to a mere 0.04% of the communities. BES-treated SFMs showed very different community structures, especially in the contributions of organisms involved in fermentation and syntrophic activities. Indirect evidence provided by both statistical and phylogenetic analysis validated the implication of a new cluster of actors, distantly affiliated with the Family Geobacteraceae (Phylum δ-Proteobacteria), in the dehalogenation of low chlorinated PCB congeners. Members of this Family are known already for their dehalogenation capacity of chlorinated solvents. As a result, the present study widens the knowledge for the phylogenetic reservoir of indigenous PCB dechlorinating

ALI (Autonomous Lunar Investigator): Revolutionary Approach to Exploring the Moon with Addressable Reconfigurable Technology

Science.gov (United States)

Clark, P. E.; Curtis, S. A.; Rilee, M. L.; Floyd, S. R.

2005-01-01

Addressable Reconfigurable Technology (ART) based structures: Mission Concepts based on Addressable Reconfigurable Technology (ART), originally studied for future ANTS (Autonomous Nanotechnology Swarm) Space Architectures, are now being developed as rovers for nearer term use in lunar and planetary surface exploration. The architecture is based on the reconfigurable tetrahedron as a building block. Tetrahedra are combined to form space-filling networks, shaped for the required function. Basic structural components are highly modular, addressable arrays of robust nodes (tetrahedral apices) from which highly reconfigurable struts (tetrahedral edges), acting as supports or tethers, are efficiently reversibly deployed/stowed, transforming and reshaping the structures as required.

Species and Sex Differences in the Morphogenic Response of Primary Rodent Neurons to 3,3'-Dichlorobiphenyl (PCB 11).

Science.gov (United States)

Sethi, Sunjay; Keil, Kimberly P; Lein, Pamela J

2017-12-23

PCB 11 is an emerging global pollutant that we recently showed promotes axonal and dendritic growth in primary rat neuronal cell cultures. Here, we address the influence of sex and species on neuronal responses to PCB 11. Neuronal morphology was quantified in sex-specific primary hippocampal and cortical neuron-glia co-cultures derived from neonatal C57BL/6J mice and Sprague Dawley rats exposed for 48 h to vehicle (0.1% DMSO) or PCB 11 at concentrations ranging from 1 fM to 1 nM. Total axonal length was quantified in tau-1 immunoreactive neurons at day in vitro (DIV) 2; dendritic arborization was assessed by Sholl analysis at DIV 9 in neurons transfected with MAP2B-FusRed. In mouse cultures, PCB 11 enhanced dendritic arborization in female, but not male, hippocampal neurons and male, but not female, cortical neurons. In rat cultures, PCB 11 promoted dendritic arborization in male and female hippocampal and cortical neurons. PCB 11 also increased axonal growth in mouse and rat neurons of both sexes and neuronal cell types. These data demonstrate that PCB 11 exerts sex-specific effects on neuronal morphogenesis that vary depending on species, neurite type, and neuronal cell type. These findings have significant implications for risk assessment of this emerging developmental neurotoxicant.

Effects of thiol antioxidants on the atropselective oxidation of 2,2',3,3',6,6'-hexachlorobiphenyl (PCB 136) by rat liver microsomes.

Science.gov (United States)

Wu, Xianai; Lehmler, Hans-Joachim

2016-02-01

Chiral polychlorinated biphenyl (PCB) congeners, such as PCB 136, are atropselectively metabolized to various hydroxylated PCB metabolites (HO-PCBs). The present study investigates the effect of two thiol antioxidants, glutathione and N-acetyl-cysteine (NAC), on profiles and chiral signatures of PCB 136 and its HO-PCB metabolites in rat liver microsomal incubations. Liver microsomes prepared from rats pretreated with phenobarbital were incubated with PCB 136 (5 μM) in the presence of the respective antioxidant (0-10 mM), and levels and chiral signatures of PCB 136 and its HO-PCB metabolites were determined. Three metabolites, 5-136 (2,2',3,3',6,6'-hexachlorobiphenyl-5-ol), 4-136 (2,2',3,3',6,6'-hexachlorobiphenyl-4-ol), and 4,5-136 (2,2',3,3',6,6'-hexachlorobiphenyl-4,5-diol), were detected in all incubations, with 5-136 being the major metabolite. Compared to microsomal incubations without antioxidant, levels of 4,5-136 increased with increasing antioxidant concentration, whereas levels of PCB 136 and both mono-HO-PCBs were not affected by the presence of either antioxidant. PCB 136, 4-136, and 5-136 displayed significant atropisomeric enrichment; however, the direction and extent of the atropisomeric enrichment was not altered in the presence of an antioxidant. Because 4,5-136 can either be conjugated to a sulfate or glucuronide metabolite that is readily excreted or further oxidized a potentially toxic PCB 136 quinone, the effect of both thiol antioxidants on 4,5-136 formation suggests that disruptions of glutathione homeostasis may alter the balance between both metabolic pathways and, thus, PCB 136 toxicity in vivo.

Maskless fabrication of a microfluidic device with interdigitated electrodes on PCB using laser ablation

Science.gov (United States)

Contreras-Saenz, Michael; Hassard, Christian; Vargas-Chacon, Rafael; Gordillo, Jose Luis; Camacho-Leon, Sergio

2016-03-01

This paper reports the maskless fabrication of a microfluidic device with interdigitated electrodes (IDE) based on the technology of MicroElectroMechanical Systems on Printed Circuit Board (PCB-MEMS) and laser ablation. The device has flame retardant (FR)-4 resin as substrate, cooper (Cu) as active material and SU-8 polymer as structural material. By adjusting the laser parameters, Cu IDEs and SU-8 microchannels were successfully patterned onto the FR-4 substrate. The respective width, gap and overlap of the IDEs were 50 μm, 25 μm and 500 μm. The respective width, depth and length of the microchannels were 210 μm, 24.6 μm and 6.3 mm. The resolution and repeatability achieved in this approach, along with the low cost of the involved materials and techniques, enable an affordable micromachining platform with rapid fabrication-test cycle to develop active multiphysic microdevices with several applications in the fields of biosensing, cell culture, drug delivery, transport and sorting of molecules, among others.

Origami tubes with reconfigurable polygonal cross-sections.

Science.gov (United States)

Filipov, E T; Paulino, G H; Tachi, T

2016-01-01

Thin sheets can be assembled into origami tubes to create a variety of deployable, reconfigurable and mechanistically unique three-dimensional structures. We introduce and explore origami tubes with polygonal, translational symmetric cross-sections that can reconfigure into numerous geometries. The tubular structures satisfy the mathematical definitions for flat and rigid foldability, meaning that they can fully unfold from a flattened state with deformations occurring only at the fold lines. The tubes do not need to be straight and can be constructed to follow a non-linear curved line when deployed. The cross-section and kinematics of the tubular structures can be reprogrammed by changing the direction of folding at some folds. We discuss the variety of tubular structures that can be conceived and we show limitations that govern the geometric design. We quantify the global stiffness of the origami tubes through eigenvalue and structural analyses and highlight the mechanical characteristics of these systems. The two-scale nature of this work indicates that, from a local viewpoint, the cross-sections of the polygonal tubes are reconfigurable while, from a global viewpoint, deployable tubes of desired shapes are achieved. This class of tubes has potential applications ranging from pipes and micro-robotics to deployable architecture in buildings.

Origami tubes with reconfigurable polygonal cross-sections

Science.gov (United States)

Filipov, E. T.; Paulino, G. H.; Tachi, T.

2016-01-01

Thin sheets can be assembled into origami tubes to create a variety of deployable, reconfigurable and mechanistically unique three-dimensional structures. We introduce and explore origami tubes with polygonal, translational symmetric cross-sections that can reconfigure into numerous geometries. The tubular structures satisfy the mathematical definitions for flat and rigid foldability, meaning that they can fully unfold from a flattened state with deformations occurring only at the fold lines. The tubes do not need to be straight and can be constructed to follow a non-linear curved line when deployed. The cross-section and kinematics of the tubular structures can be reprogrammed by changing the direction of folding at some folds. We discuss the variety of tubular structures that can be conceived and we show limitations that govern the geometric design. We quantify the global stiffness of the origami tubes through eigenvalue and structural analyses and highlight the mechanical characteristics of these systems. The two-scale nature of this work indicates that, from a local viewpoint, the cross-sections of the polygonal tubes are reconfigurable while, from a global viewpoint, deployable tubes of desired shapes are achieved. This class of tubes has potential applications ranging from pipes and micro-robotics to deployable architecture in buildings. PMID:26997894

Liquid metal-based reconfigurable and stretchable photolithography

International Nuclear Information System (INIS)

Kim, Daeyoung; Yoo, Jun Hyeon; Lee, Jeong-Bong

2016-01-01

Conventional ultraviolet (UV) lithography typically uses a photomask made of a fused silica plate covered with a layer of UV opaque material such as chromium. The photomask has passive binary patterns of UV opaque and UV transparent regions and the pattern is unalterable. We report a novel real-time dynamically reconfigurable photomask technology using a liquid metal (as a UV opaque material) filled in polydimethylsiloxane (PDMS, as a UV transparent material) microfluidic channels. We found that the gallium-based liquid metal (e.g. Galinstan ® ) is opaque in broad spectrum of light in the wavelength from 325 nm to 850 nm while the PDMS is highly transparent in this wide range of spectrum. We made both bright field and dark field microfluidic photomasks and transferred various patterns onto a positive photoresist. A 7-segment display microfluidic channel photomask was also fabricated and decimal numerals (from ‘0’ to ‘9’) were patterned with one photomask by dynamically reconfiguring decimal numeral shapes with on-demand injection and withdrawal of the liquid metal in specific segment microfluidic channels in the photomask. In addition, utilizing mechanical flexibility of the PDMS and the liquid metal, reconfiguration of the patterns in a microfluidic photomask under stretching was successfully tested. (paper)

Repetition or Reconfiguration

DEFF Research Database (Denmark)

Andersen, Kristina Vaarst

, the cognitive quality of knowledge held by individual professionals is the key microfoundation for project level performance. This paper empirically tests effects of project participants with and without knowledge diversity for project level performance for projects aiming for varying degrees of repetition...... and reconfiguration. The results indicate that project performance benefits form contributions from individuals holding diverse knowledge only when projects aim for high differentiation levels. This positive association is not just moderated, it may even be reversed in the case of professionals participating in low...

Multi-criteria grey relational approach to evaluating reconfigurable manufacturing configurations

OpenAIRE

Rehman, A. U.

2017-01-01

In response to highly dynamic markets, manufacturing industries need alternative feasible manufacturing strategies. The strategy currently adopted is to reconfigure the existing manufacturing system. The conditions to reconfigure existing configurations change from time to time. An attempt is made to identify and apply an approach to evaluate these configurations. The paper proposes a grey relational decision-making approach. The approach takes into account multiple performance measures. The ...

Reconfigurable Manufacturing System Design and Implementation

DEFF Research Database (Denmark)

Hadar, Ronen; Bilberg, Arne

2013-01-01

is meant primarily to show the physical feasibility of the system and provide a first-look into a real production application of the RMS ideas. The purpose of this paper is to present the design of the manufacturer’s RMS proof of concept, its implementation, and evaluation results.......Reconfigurable Manufacturing Systems (RMS) have been an increasing area of interest in the research arena. However, it seems that current literature is lacking application and implementation cases where RMS are simulated, tested, and evaluated as a feasible manufacturing concept. A Manufacturer...... of Consumer Goods identified the potential of the RMS concept and decided to investigate the concept in a real production installation. The result of this development is a proof of concept of a changeable and reconfigurable assembly and decoration system based on the principles of RMS. This proof of concept...

Transcriptomics identifies differences between ultrapure non-dioxin-like polychlorinated biphenyls (PCBs) and dioxin-like PCB126 in cultured peripheral blood mononuclear cells

International Nuclear Information System (INIS)

Wens, B.; De Boever, P.; Maes, M.; Hollanders, K.; Schoeters, G.

2011-01-01

Polychlorinated biphenyls (PCBs) remain ubiquitously present in human lipids despite the ban on their production and use. Their presence can be chemically monitored in peripheral blood samples of the general population. We tested whether in vitro exposure to different PCB congeners induced different gene expression profiles in peripheral blood cells. We have isolated peripheral blood mononuclear cells (PBMC) from whole blood of 8 healthy individuals and exposed these cells in vitro to individual non-dioxin-like (NDL)-PCB congeners (PCB52, 138 or 180; 10 μM) or dioxin-like (DL)-PCB congener PCB126 (1 μM) during 18 h. Differential gene expression response was measured using Agilent whole-human genome microarrays. Two-way ANOVA analysis of the data showed that both gender and PCB exposure are important factors influencing gene expression responses in blood cells. Hierarchical cluster analysis of genes influenced by PCB exposure, revealed that DL-PCB126 induced a different gene expression response compared to the NDL-PCBs. Biological interpretation of the results revealed that exposure to PCB126 induced the AhR signaling pathway, whereas the induction of nuclear receptor pathways by the NDL-PCBs was limited in blood cells. Nevertheless, molecular responses of blood cells to individual PCB congeners revealed significantly expressed genes that play a role in biological functions and processes known to be affected by PCB exposure in vivo. Observed gene expression changes in this in vitro model were found to be related to hepatotoxicity, immune and inflammatory response and disturbance of lipid and cholesterol homeostasis.

Reconfigurable Patch Antenna Radiations Using Plasma Faraday Shield Effect

OpenAIRE

Barro , Oumar Alassane; Himdi , Mohamed; Lafond , Olivier

2016-01-01

International audience; This letter presents a new reconfigurable antenna associated with a plasma Faraday shield effect. The Faraday shield effect is realized by using a fluorescent lamp. A patch antenna operating at 2.45 GHz is placed inside the lamp. The performance of the reconfigurable system is observed in terms of S11, gain and radiation patterns by simulation and measurement. It is shown that by switching ON the fluorescent lamp, the gain of the antenna decreases and the antenna syste...

Effects of natural organic matter on PCB-activated carbon sorption kinetics: implications for sediment capping applications.

Science.gov (United States)

Fairey, Julian L; Wahman, David G; Lowry, Gregory V

2010-01-01

In situ capping of polychlorinated biphenyl (PCB)-contaminated sediments with a layer of activated carbon has been proposed, but several questions remain regarding the long-term effectiveness of this remediation strategy. Here, we assess the degree to which kinetic limitations, size exclusion effects, and electrostatic repulsions impaired PCB sorption to activated carbon. Sorption of 11 PCB congeners with activated carbon was studied in fixed bed reactors with organic-free water (OFW) and Suwannee River natural organic matter (SR-NOM), made by reconstituting freeze-dried SR-NOM at a concentration of 10 mg L(-1) as carbon. In the OFW test, no PCBs were detected in the column effluent over the 390-d study, indicating that PCB-activated carbon equilibrium sorption capacities may be achieved before breakthrough even at the relatively high hydraulic loading rate (HLR) of 3.1 m h(-1). However, in the SR-NOM fixed-bed test, partial PCB breakthrough occurred over the entire 320-d test (HLRs of 3.1-, 1.5-, and 0.8 m h(-1)). Simulations from a modified pore and surface diffusion model indicated that external (film diffusion) mass transfer was the dominant rate-limiting step but that internal (pore diffusion) mass transfer limitations were also present. The external mass transfer limitation was likely caused by formation of PCB-NOM complexes that reduced PCB sorption through a combination of (i) increased film diffusion resistance; (ii) size exclusion effects; and (iii) electrostatic repulsive forces between the PCBs and the NOM-coated activated carbon. However, the seepage velocities in the SR-NOM fixed bed test were about 1000 times higher than would be expected in a sediment cap. Therefore, additional studies are needed to assess whether the mass transfer limitations described here would be likely to manifest themselves at the lower seepage velocities observed in practice.

Radiation-hardened optically reconfigurable gate array exploiting holographic memory characteristics

Science.gov (United States)

Seto, Daisaku; Watanabe, Minoru

2015-09-01

In this paper, we present a proposal for a radiation-hardened optically reconfigurable gate array (ORGA). The ORGA is a type of field programmable gate array (FPGA). The ORGA configuration can be executed by the exploitation of holographic memory characteristics even if 20% of the configuration data are damaged. Moreover, the optoelectronic technology enables the high-speed reconfiguration of the programmable gate array. Such a high-speed reconfiguration can increase the radiation tolerance of its programmable gate array to 9.3 × 104 times higher than that of current FPGAs. Through experimentation, this study clarified the configuration dependability using the impulse-noise emulation and high-speed configuration capabilities of the ORGA with corrupt configuration contexts. Moreover, the radiation tolerance of the programmable gate array was confirmed theoretically through probabilistic calculation.

21 CFR 509.30 - Temporary tolerances for polychlorinated biphenyls (PCB's).

Science.gov (United States)

2010-04-01

...) are toxic, industrial chemicals. Because of their widespread, uncontrolled industrial applications... residues of PCB's as unavoidable environmental or industrial contaminants are established for a sufficient...

A hardware overview of the RHIC LLRF platform

International Nuclear Information System (INIS)

Hayes, T.; Smith, K.S.

2011-01-01

The RHIC Low Level RF (LLRF) platform is a flexible, modular system designed around a carrier board with six XMC daughter sites. The carrier board features a Xilinx FPGA with an embedded, hard core Power PC that is remotely reconfigurable. It serves as a front end computer (FEC) that interfaces with the RHIC control system. The carrier provides high speed serial data paths to each daughter site and between daughter sites as well as four generic external fiber optic links. It also distributes low noise clocks and serial data links to all daughter sites and monitors temperature, voltage and current. To date, two XMC cards have been designed: a four channel high speed ADC and a four channel high speed DAC. The new LLRF hardware was used to replace the old RHIC LLRF system for the 2009 run. For the 2010 run, the RHIC RF system operation was dramatically changed with the introduction of accelerating both beams in a new, common cavity instead of each ring having independent cavities. The flexibility of the new system was beneficial in allowing the low level system to be adapted to support this new configuration. This hardware was also used in 2009 to provide LLRF for the newly commissioned Electron Beam Ion Source.

SACFIR: SDN-Based Application-Aware Centralized Adaptive Flow Iterative Reconfiguring Routing Protocol for WSNs.

Science.gov (United States)

Aslam, Muhammad; Hu, Xiaopeng; Wang, Fan

2017-12-13

Smart reconfiguration of a dynamic networking environment is offered by the central control of Software-Defined Networking (SDN). Centralized SDN-based management architectures are capable of retrieving global topology intelligence and decoupling the forwarding plane from the control plane. Routing protocols developed for conventional Wireless Sensor Networks (WSNs) utilize limited iterative reconfiguration methods to optimize environmental reporting. However, the challenging networking scenarios of WSNs involve a performance overhead due to constant periodic iterative reconfigurations. In this paper, we propose the SDN-based Application-aware Centralized adaptive Flow Iterative Reconfiguring (SACFIR) routing protocol with the centralized SDN iterative solver controller to maintain the load-balancing between flow reconfigurations and flow allocation cost. The proposed SACFIR's routing protocol offers a unique iterative path-selection algorithm, which initially computes suitable clustering based on residual resources at the control layer and then implements application-aware threshold-based multi-hop report transmissions on the forwarding plane. The operation of the SACFIR algorithm is centrally supervised by the SDN controller residing at the Base Station (BS). This paper extends SACFIR to SDN-based Application-aware Main-value Centralized adaptive Flow Iterative Reconfiguring (SAMCFIR) to establish both proactive and reactive reporting. The SAMCFIR transmission phase enables sensor nodes to trigger direct transmissions for main-value reports, while in the case of SACFIR, all reports follow computed routes. Our SDN-enabled proposed models adjust the reconfiguration period according to the traffic burden on sensor nodes, which results in heterogeneity awareness, load-balancing and application-specific reconfigurations of WSNs. Extensive experimental simulation-based results show that SACFIR and SAMCFIR yield the maximum scalability, network lifetime and stability

SACFIR: SDN-Based Application-Aware Centralized Adaptive Flow Iterative Reconfiguring Routing Protocol for WSNs

Directory of Open Access Journals (Sweden)

Muhammad Aslam

2017-12-01

Full Text Available Smart reconfiguration of a dynamic networking environment is offered by the central control of Software-Defined Networking (SDN. Centralized SDN-based management architectures are capable of retrieving global topology intelligence and decoupling the forwarding plane from the control plane. Routing protocols developed for conventional Wireless Sensor Networks (WSNs utilize limited iterative reconfiguration methods to optimize environmental reporting. However, the challenging networking scenarios of WSNs involve a performance overhead due to constant periodic iterative reconfigurations. In this paper, we propose the SDN-based Application-aware Centralized adaptive Flow Iterative Reconfiguring (SACFIR routing protocol with the centralized SDN iterative solver controller to maintain the load-balancing between flow reconfigurations and flow allocation cost. The proposed SACFIR’s routing protocol offers a unique iterative path-selection algorithm, which initially computes suitable clustering based on residual resources at the control layer and then implements application-aware threshold-based multi-hop report transmissions on the forwarding plane. The operation of the SACFIR algorithm is centrally supervised by the SDN controller residing at the Base Station (BS. This paper extends SACFIR to SDN-based Application-aware Main-value Centralized adaptive Flow Iterative Reconfiguring (SAMCFIR to establish both proactive and reactive reporting. The SAMCFIR transmission phase enables sensor nodes to trigger direct transmissions for main-value reports, while in the case of SACFIR, all reports follow computed routes. Our SDN-enabled proposed models adjust the reconfiguration period according to the traffic burden on sensor nodes, which results in heterogeneity awareness, load-balancing and application-specific reconfigurations of WSNs. Extensive experimental simulation-based results show that SACFIR and SAMCFIR yield the maximum scalability, network lifetime

Identification of lipidomic markers of chronic 3,3',4,4',5-pentachlorobiphenyl (PCB 126) exposure in the male rat liver.

Science.gov (United States)

Kania-Korwel, Izabela; Wu, Xianai; Wang, Kai; Lehmler, Hans-Joachim

2017-09-01

Exposure to PCB 126, an environmentally relevant aryl hydrocarbon receptor agonist, is an environmental factor causing hepatic steatosis in rodent models; however, the lipidome of PCB 126-exposed rats has not been investigated in-depth. The objective of the present study was therefore to characterize dose-dependent changes in the lipid profile in the liver of male Sprague-Dawley rats exposed to PCB 126. Rats were exposed for three month to intraperitoneal injections of 0.01, 0.05 and 0.2μmol/kg bw PCB 126 in corn oil. Control animals were exposed in parallel and received corn oil alone. Lipids were extracted from whole liver homogenate and levels of polar lipids and fatty acids incorporated into triglycerides (FA TAGs ) were determined with tandem mass spectrometry using electrospray ionization. PCB 126 exposure increased the hepatic content of polar lipids and FA TAGs . Protein adjusted levels of several polar lipid classes, in particular phosphatidylserine levels, decreased, whereas FA TAGs levels typically increased with increasing PCB 126 dose. Sensitive, dose-dependent endpoints of PCB 126 exposure included an increase in levels of adrenic acid incorporated into triglycerides and changes in levels of certain ether-linked phospholipid and 1-alkyl/1-alkenyldiacylglycerol species, as determined using partial least square discriminant analysis (PLS-DA) and ANOVA. These changes in the composition of polar lipids and fatty acid in the liver of PCB 126 exposed rats identified several novel markers of PCB 126-mediated fatty liver disease that need to be validated in further studies. Copyright © 2017 Elsevier B.V. All rights reserved.

Integrated Nanozero Valent Iron and Biosurfactant-Aided Remediation of PCB-Contaminated Soil

Directory of Open Access Journals (Sweden)

He Zhang

2016-01-01

Full Text Available Polychlorobiphenyls (PCBs have been identified as environmental hazards for years. Due to historical issues, a considerable amount of PCBs was released deep underground in Canada. In this research, a nanoscale zero valent iron- (nZVI- aided dechlorination followed by biosurfactant enhanced soil washing method was developed to remove PCBs from soil. During nZVI-aided dechlorination, the effects of nZVI dosage, initial pH level, and temperature were evaluated, respectively. Five levels of nZVI dosage and two levels of initial pH were experimented to evaluate the PCB dechlorination rate. Additionally, the temperature changes could positively influence the dechlorination process. In soil washing, the presence of nanoiron particles played a key role in PCB removal. The crude biosurfactant was produced using a bacterial stain isolated from the Atlantic Ocean and was applied for soil washing. The study has led to a promising technology for PCB-contaminated soil remediation.

Dioxins, DL-PCB and NDL-PCB accumulation profiles in livers from sheep and cattle reared in North-western Italy.

Science.gov (United States)

Benedetto, A; Brizio, P; Guaraldo, P; Stella, C; Cappa, C; Baioni, E; Spalenza, V; Nebbia, C; Abete, M C

2016-06-01

Products of animal origin represent the main route of human exposure to dioxins and dioxin-like PCBs (DL-compounds). Recently, concerns have been raised about ovine products, particularly the liver, in which relatively high levels of DL-compounds have been reported. We surveyed ovine and bovine livers in areas with no known sources of dioxin or DL-PCB contamination, in order to assess accumulation patterns for both DL-compounds and non-DL (NDL-) PCBs. None of the ovine and bovine samples exceeded the current Maximum Limits (MLs) for DL-compounds. Liver DL-compound TEQ concentrations were up to 5-fold higher in sheep than in cows. No statistically significant differences in total NDL-PCBs levels were found. The main contributors to TEQ levels were the Penta- and Hexa-chlorinated PCDFs and PCB 126. The results confirm the increased bioaccumulation in ovine liver towards specific DL-compounds even in ewes reared in areas with no known sources of PCDD/Fs or DL-PCBs contamination. Copyright © 2016 Elsevier Ltd. All rights reserved.

Reconfigurable control of a power plant deaerator using learning automata

International Nuclear Information System (INIS)

Garcia, H.E.; Ray, A.; Edwards, R.M.

1991-01-01

A deaerating feedwater heater, equipped with a water level controller and a pressure controller, has been chosen to investigate the feasibility of a reconfigurable control scheme for power plants by incorporating the concept of learning automata. In this paper simulation results based on a model of the Experimental Breeder Reactor (EBR-II) at the Argonne National Laboratory site in Idaho are presented to demonstrate the efficacy of the reconfigurable control scheme

Two-step bioleaching of copper and gold from discarded printed circuit boards (PCB).

Science.gov (United States)

Işıldar, Arda; van de Vossenberg, Jack; Rene, Eldon R; van Hullebusch, Eric D; Lens, Piet N L

2016-11-01

An effective strategy for environmentally sound biological recovery of copper and gold from discarded printed circuit boards (PCB) in a two-step bioleaching process was experimented. In the first step, chemolithotrophic acidophilic Acidithiobacillus ferrivorans and Acidithiobacillus thiooxidans were used. In the second step, cyanide-producing heterotrophic Pseudomonas fluorescens and Pseudomonas putida were used. Results showed that at a 1% pulp density (10g/L PCB concentration), 98.4% of the copper was bioleached by a mixture of A. ferrivorans and A. thiooxidans at pH 1.0-1.6 and ambient temperature (23±2°C) in 7days. A pure culture of P. putida (strain WCS361) produced 21.5 (±1.5)mg/L cyanide with 10g/L glycine as the substrate. This gold complexing agent was used in the subsequent bioleaching step using the Cu-leached (by A. ferrivorans and A. thiooxidans) PCB material, 44.0% of the gold was mobilized in alkaline conditions at pH 7.3-8.6, and 30°C in 2days. This study provided a proof-of-concept of a two-step approach in metal bioleaching from PCB, by bacterially produced lixiviants. Copyright © 2015 Elsevier Ltd. All rights reserved.

Studies on the distribution of 14C labelled PCB in the body, 2

International Nuclear Information System (INIS)

Nagao, Soshichi; Hosoya, Hideo; Kugoh, Tadashi

1975-01-01

Authors carried out the experiments of 14 C-PCB distribution in fish (Carrasius auratus) by autoradiography. 0.1 micro Ci of 14 C-PCB solution was administrated by both methods, one of the method was used as mixture of PCB solution in the environmental water of the fish and other one was used as orally medication for the fish. The fish were kept in 300 ml of exposed with 500 ml beaker per fish, and then the fish were killed for the sake of autoradiography at 1, 3, 6 and 24 hours of the experiments. Radioactivity of the water was analyzed at each experimental time as cpm/ml. In cases of the administration in the environmental water, radioactivity of the water was reducing in direct relation to the period in the contact time between the fish and the water, and autoradiogram appeared that radioactivity of the sectioning body plate was increasing in parallel with the contact in the water with the fish. In cases of the oral medication, radioactivity in the water and autoradiogram were increasing in direct relation to the period in the contact time. In both cases 14 C-PCB was found into the brain and spinal cord, it was special finding as compared with other animals. (auth.)

Preparing for a Product Platform

DEFF Research Database (Denmark)

Fiil-Nielsen, Ole; Munk, Lone; Mortensen, Niels Henrik

2005-01-01

on commonalities and similarities in the product family, and variance should be based on customer demands. To relate these terms and to improve the basis on which decisions are made, we need a way of visualizing the hierarchy of the product family as well as the commonality and variance. This visualization method...... of the platform or ensuring that the platform can meet future demands will be very useful in the preparation process of a platform synthesis as well as in the updating or reengineering of an existing product development platform.......Experience in the industry as well as recent related scientific publications show the benefits of product development platforms. Companies use platforms to develop not a single but multiple products (i.e. a product family) simultaneously. When these product development projects are coordinated...

Assessing PCB pollution in the Baltic Sea - An equilibrium partitioning based study

DEFF Research Database (Denmark)

Lang, Susann-Cathrin; Mayer, Philipp; Hursthouse, Andrew

2018-01-01

Sediment cores and bottom water samples from across the Baltic Sea region were analyzed for freely dissolved concentrations (Cfree), total sediment concentrations (CT) and the dissolved aqueous fraction in water of seven indicator PCBs. Ex-situ equilibrium sampling of sediment samples was conducted...... with polydimethylsiloxane (PDMS) coated glass fibers that were analyzed by automated thermal desorption GC-MS, which yielded PCB concentrations in the fiber coating (CPDMS). Measurements of CPDMS and CT were then applied to determine (i) spatially resolved freely dissolved PCB concentrations; (ii) baseline toxicity...

PCB 126 and Other Dioxin-Like PCBs Specifically Suppress Hepatic PEPCK Expression via the Aryl Hydrocarbon Receptor

Science.gov (United States)

Zhang, Wenshuo; Sargis, Robert M.; Volden, Paul A.; Carmean, Christopher M.; Sun, Xiao J.; Brady, Matthew J.

2012-01-01

Dioxins and dioxin-like compounds encompass a group of structurally related heterocyclic compounds that bind to and activate the aryl hydrocarbon receptor (AhR). The prototypical dioxin is 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), a highly toxic industrial byproduct that incites numerous adverse physiological effects. Global commercial production of the structurally similar polychlorinated biphenyls (PCBs), however, commenced early in the 20th century and continued for decades; dioxin-like PCBs therefore contribute significantly to total dioxin-associated toxicity. In this study, PCB 126, the most potent dioxin-like PCB, was evaluated with respect to its direct effects on hepatic glucose metabolism using primary mouse hepatocytes. Overnight treatment with PCB 126 reduced hepatic glycogen stores in a dose-dependent manner. Additionally, PCB 126 suppressed forskolin-stimulated gluconeogenesis from lactate. These effects were independent of acute toxicity, as PCB 126 did not increase lactate dehydrogenase release nor affect lipid metabolism or total intracellular ATP. Interestingly, provision of cells with glycerol instead of lactate as the carbon source completely restored hepatic glucose production, indicating specific impairment in the distal arm of gluconeogenesis. In concordance with this finding, PCB 126 blunted the forskolin-stimulated increase in phosphoenolpyruvate carboxykinase (PEPCK) mRNA levels without affecting glucose-6-phosphatase expression. Myricetin, a putative competitive AhR antagonist, reversed the suppression of PEPCK induction by PCB 126. Furthermore, other dioxin-like PCBs demonstrated similar effects on PEPCK expression in parallel with their ability to activate AhR. It therefore appears that AhR activation mediates the suppression of PEPCK expression by dioxin-like PCBs, suggesting a role for these pollutants as disruptors of energy metabolism. PMID:22615911

PCB 126 and other dioxin-like PCBs specifically suppress hepatic PEPCK expression via the aryl hydrocarbon receptor.

Directory of Open Access Journals (Sweden)

Wenshuo Zhang

Full Text Available Dioxins and dioxin-like compounds encompass a group of structurally related heterocyclic compounds that bind to and activate the aryl hydrocarbon receptor (AhR. The prototypical dioxin is 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD, a highly toxic industrial byproduct that incites numerous adverse physiological effects. Global commercial production of the structurally similar polychlorinated biphenyls (PCBs, however, commenced early in the 20(th century and continued for decades; dioxin-like PCBs therefore contribute significantly to total dioxin-associated toxicity. In this study, PCB 126, the most potent dioxin-like PCB, was evaluated with respect to its direct effects on hepatic glucose metabolism using primary mouse hepatocytes. Overnight treatment with PCB 126 reduced hepatic glycogen stores in a dose-dependent manner. Additionally, PCB 126 suppressed forskolin-stimulated gluconeogenesis from lactate. These effects were independent of acute toxicity, as PCB 126 did not increase lactate dehydrogenase release nor affect lipid metabolism or total intracellular ATP. Interestingly, provision of cells with glycerol instead of lactate as the carbon source completely restored hepatic glucose production, indicating specific impairment in the distal arm of gluconeogenesis. In concordance with this finding, PCB 126 blunted the forskolin-stimulated increase in phosphoenolpyruvate carboxykinase (PEPCK mRNA levels without affecting glucose-6-phosphatase expression. Myricetin, a putative competitive AhR antagonist, reversed the suppression of PEPCK induction by PCB 126. Furthermore, other dioxin-like PCBs demonstrated similar effects on PEPCK expression in parallel with their ability to activate AhR. It therefore appears that AhR activation mediates the suppression of PEPCK expression by dioxin-like PCBs, suggesting a role for these pollutants as disruptors of energy metabolism.

Communication-Oriented Design Space Exploration for Reconfigurable Architectures

Directory of Open Access Journals (Sweden)

Gogniat Guy

2007-01-01

Full Text Available Many academic works in computer engineering focus on reconfigurable architectures and associated tools. Fine-grain architectures, field programmable gate arrays (FPGAs, are the most well-known structures of reconfigurable hardware. Dedicated tools (generic or specific allow for the exploration of their design space to choose the best architecture characteristics and/or to explore the application characteristics. The aim is to increase the synergy between the application and the architecture in order to get the best performance. However, there is no generic tool to perform such an exploration for coarse-grain or heterogeneous-grain architectures, just a small number of very specific tools are able to explore a limited set of architectures. To address this major lack, in this paper we propose a new design space exploration approach adapted to fine- and coarse-grain granularities. Our approach combines algorithmic and architecture explorations. It relies on an automatic estimation tool which computes the communication hierarchical distribution and the architectural processing resources use rate for the architecture under exploration. Such an approach forwards the rapid definition of efficient reconfigurable architectures dedicated to one or several applications.

Bioaccumulation of PCBs in the sea urchin Paracentrotus lividus: seawater and food exposures to a 14C-radiolabelled congener (PCB no. 153)

International Nuclear Information System (INIS)

Danis, B.; Cotret, O.; Teyssie, J.L.; Bustamante, P.; Fowler, S.W.; Warnau, M.

2005-01-01

Adult Paracentrotus lividus were exposed to a 14 C-labelled PCB congener (PCB no. 153) using two different exposure modes: (1) the surrounding sea water and (2) the food (viz. the phanerogam Posidonia oceanica and the brown alga Taonia atomaria). Uptake kinetics from water and loss kinetics after single feeding were followed in four body compartments of the sea urchins (body wall, spines, gut and gonads). Results indicate that PCB bioaccumulation in P. lividus varies from one body compartment to another, with the exposure mode and the nature of the food. The echinoids accumulate PCB no. 153 more efficiently when exposed via water than via the food (the transfer efficiency is higher by one order of magnitude). Target body compartments of PCB no. 153 were found to be body wall and spines when individuals were exposed via water, and gut when they were exposed via food. It is concluded that P. lividus is an efficient bioaccumulator of PCB and that it could be considered as an interesting indicator for monitoring PCB contamination in the marine environment. - The sea urchin Paracentrotus lividus is a valuable indicator for PCB contamination

Remediation of PCB-contaminated soils. Risk analysis of biological in situ processes

Energy Technology Data Exchange (ETDEWEB)

Rein, Arno

2006-12-08

Biological in situ measures can be efficient and cost effective options for the remediation of contaminated sites. However, the accepted application requires a detailed and reliable analysis of potential impacts. An important objective is to quantify the potential of contaminant degradation and metabolite formation. This thesis addresses a quantitative multimedia risk assessment. Methodologies and tools were developed for this objective and applied to evaluate in situ bioremediation of soils contaminated with polychlorinated biphenyls (PCBs). Soil bacteria in conjunction with plant roots were addressed (rhizoremediation) with a focus on the use of genetically modified microorganisms (GMOs). PCBs are known to be harmful compounds that are ubiquitously distributed in the environment. PCB contaminations in soil and groundwater were identified as important problems. 209 different congeners are sterically possible, but not all are of environmental significance. PCB congeners of concern were evaluated with respect to their potential toxicity, environmental occurrence and mobility. For this objective, congener specific data on the toxicity potential and the frequency in environmental matrices were collected. To quantify the mobility potential, multimedia modelling was performed applying deterministic and probabilistic procedures. 56 PCB congeners of concern were evaluated, and multimedia risk assessments of PCB-contaminated soils should concentrate on this group. Kinetics parameters were specified for degradation experiments with individual PCB congeners in solution and different bacterial strains. These laboratory assays were performed with wild-type Burkholderia sp. strain LB400 and the genetically modified Pseudomonas fluorescens strains F113pcb and F113L::1180. The F113 derivatives demonstrated a good survival ability in willow (Salix sp.) rhizosphere (mesocosm experiments). Therefore, and due to high depletion rates, rhizoremediation with F113L::1180 and willow

Biological remediation of polychlorinated biphenyls (PCB) in the ...

African Journals Online (AJOL)

ajl yemi

2011-12-19

Dec 19, 2011 ... This widespread contamination of air, soil and water by metals, chemicals and metalloids causes environmental concerns, ... basic structure of PCB according to Wiegel and Wu. (2000), is as shown in Figure. 1. ..... inability to understand the interaction between complex chemicals in addition to physical and ...

Robust Throughput Boosting for Low Latency Dynamic Partial Reconfiguration

DEFF Research Database (Denmark)

Nannarelli, Alberto; Re, M.; Cardarilli, Gian Carlo

2017-01-01

Reducing the configuration time of portions of an FPGA at run time is crucial in contemporary FPGA-based accelerators. In this work, we propose a method to increase the throughput for FPGA dynamic partial reconfiguration by using standard IP blocks. The throughput is increased by over-clocking th......Reducing the configuration time of portions of an FPGA at run time is crucial in contemporary FPGA-based accelerators. In this work, we propose a method to increase the throughput for FPGA dynamic partial reconfiguration by using standard IP blocks. The throughput is increased by over...

A Domain-Specific Language for Programming Self-Reconfigurable Robots