WorldWideScience

Sample records for reclamation plant traveltime

  1. Design of 90-mgd wastewater reclamation plant

    International Nuclear Information System (INIS)

    Cain, C.B.; Kluesener, J.W.; Lazarus, E.

    1981-01-01

    Ninety MGD of municipal secondary effluent is to be reclaimed for use as cooling water in the Palo Verde Nuclear Generating Station in Arizona. The water reclamation plant design criteria are presented for nitrification, lime-soda softening, filtration, and sludge processing. In-pipe storage is used for flow equalization. Forced air down-draft trickling filters with computer-controlled recycle are used for nitrification. Effluent recirculation is used to maintain constant sludge blanket dept in the upflow solids contact clarifier softening units. An influent flow-splitting, gravity-backwash, dual-media filter is used for final suspended solids removal. Rheological data was used in the hydraulic design of sludge piping. Computerized automatic flushing also aids in preventing sludge pumping problems. Reclamation plant design and construction are integrated in one Engineering-Procurement-Construction project conducted by a single company. 5 refs

  2. Soil reclamation with turfing plant harvest

    International Nuclear Information System (INIS)

    Jouve, A.; Maubert, H.; Bon, P.; Barthe, P.

    1992-01-01

    This work performed within the European RESSAC Programme aims at providing efficient countermeasures to decontaminate agricultural soils. The evaluation of the admissible concentration of radionuclides in the soil is an important question in this topic. Two considerations may help to answer this question: the health aspect approaches with ICRP recommendations and the economical aspects which can widely interfere with the other. If the cleaning technique is inexpensive, it will be possible to enlarge its use beyond the low intervention levels. According to the frequently low migration rate of radionuclides in the soil profile after deposition on the soil surface, a method removing a thin layer of the soil surface entrapped by turfing plants will allow to limit the waste production. The method being tried in summer 1991 is inexpensive because it uses the power of the plants to convert sunlight energy into biomass. The method consist in sowing turfing plants able to develop a very dense root network entrapping the soil surface contaminated particles allowing their mechanical removal by means of existing machines: sod harvesters. This promising method, according to lab-experiments, can use the green techniques as well for hydro-seeding: a very fast tool for sowing by helicopter at the rate of 0,3 km sup 2 per day, as sod harvester able to remove a sod-soil layer thinner than 2 cm. (author)

  3. Automatic traveltime picking using instantaneous traveltime

    KAUST Repository

    Saragiotis, Christos

    2013-02-08

    Event picking is used in many steps of seismic processing. We present an automatic event picking method that is based on a new attribute of seismic signals, instantaneous traveltime. The calculation of the instantaneous traveltime consists of two separate but interrelated stages. First, a trace is mapped onto the time-frequency domain. Then the time-frequency representation is mapped back onto the time domain by an appropriate operation. The computed instantaneous traveltime equals the recording time at those instances at which there is a seismic event, a feature that is used to pick the events. We analyzed the concept of the instantaneous traveltime and demonstrated the application of our automatic picking method on dynamite and Vibroseis field data.

  4. Automatic traveltime picking using instantaneous traveltime

    KAUST Repository

    Saragiotis, Christos; Alkhalifah, Tariq Ali; Fomel, Sergey

    2013-01-01

    Event picking is used in many steps of seismic processing. We present an automatic event picking method that is based on a new attribute of seismic signals, instantaneous traveltime. The calculation of the instantaneous traveltime consists of two separate but interrelated stages. First, a trace is mapped onto the time-frequency domain. Then the time-frequency representation is mapped back onto the time domain by an appropriate operation. The computed instantaneous traveltime equals the recording time at those instances at which there is a seismic event, a feature that is used to pick the events. We analyzed the concept of the instantaneous traveltime and demonstrated the application of our automatic picking method on dynamite and Vibroseis field data.

  5. The placing of the disinfection stage in a reclamation plant to reduce haloform formation

    Energy Technology Data Exchange (ETDEWEB)

    Hart, O O

    1979-10-01

    Chlorination of water containing organic matter leads to the formation of various volatile halogenated hydrocarbons (VHH). Various process configurations of a water reclamation plant were studied to determine the best position of the primary disinfection stage in the plant to achieve the greatest possible reduction of haloform concentration in the water distribution system. The pros and cons of ozone and chlorine as disinfectants were also investigated. Experiment methodology is explained. Results indicate that breakpoint chlorination ahead of two active carbon adsorption stages is the preferred process sequence and disinfectant to assure the lowest possible VHH production in the distribution system. (3 diagrams, 1 drawing, 8 graphs, 54 references, 2 tables)

  6. The traveltime holographic principle

    KAUST Repository

    Huang, Y.; Schuster, Gerard T.

    2014-01-01

    Fermat's interferometric principle is used to compute interior transmission traveltimes τpq from exterior transmission traveltimes τsp and τsq. Here, the exterior traveltimes are computed for sources s on a boundary B that encloses a volume V of interior points p and q. Once the exterior traveltimes are computed, no further ray tracing is needed to calculate the interior times τpq. Therefore this interferometric approach can be more efficient than explicitly computing interior traveltimes τpq by ray tracing. Moreover, the memory requirement of the traveltimes is reduced by one dimension, because the boundary B is of one fewer dimension than the volume V. An application of this approach is demonstrated with interbed multiple (IM) elimination. Here, the IMs in the observed data are predicted from the migration image and are subsequently removed by adaptive subtraction. This prediction is enabled by the knowledge of interior transmission traveltimes τpq computed according to Fermat's interferometric principle. We denote this principle as the ‘traveltime holographic principle’, by analogy with the holographic principle in cosmology where information in a volume is encoded on the region's boundary.

  7. The traveltime holographic principle

    KAUST Repository

    Huang, Y.

    2014-11-06

    Fermat\\'s interferometric principle is used to compute interior transmission traveltimes τpq from exterior transmission traveltimes τsp and τsq. Here, the exterior traveltimes are computed for sources s on a boundary B that encloses a volume V of interior points p and q. Once the exterior traveltimes are computed, no further ray tracing is needed to calculate the interior times τpq. Therefore this interferometric approach can be more efficient than explicitly computing interior traveltimes τpq by ray tracing. Moreover, the memory requirement of the traveltimes is reduced by one dimension, because the boundary B is of one fewer dimension than the volume V. An application of this approach is demonstrated with interbed multiple (IM) elimination. Here, the IMs in the observed data are predicted from the migration image and are subsequently removed by adaptive subtraction. This prediction is enabled by the knowledge of interior transmission traveltimes τpq computed according to Fermat\\'s interferometric principle. We denote this principle as the ‘traveltime holographic principle’, by analogy with the holographic principle in cosmology where information in a volume is encoded on the region\\'s boundary.

  8. The traveltime holographic principle

    Science.gov (United States)

    Huang, Yunsong; Schuster, Gerard T.

    2015-01-01

    Fermat's interferometric principle is used to compute interior transmission traveltimes τpq from exterior transmission traveltimes τsp and τsq. Here, the exterior traveltimes are computed for sources s on a boundary B that encloses a volume V of interior points p and q. Once the exterior traveltimes are computed, no further ray tracing is needed to calculate the interior times τpq. Therefore this interferometric approach can be more efficient than explicitly computing interior traveltimes τpq by ray tracing. Moreover, the memory requirement of the traveltimes is reduced by one dimension, because the boundary B is of one fewer dimension than the volume V. An application of this approach is demonstrated with interbed multiple (IM) elimination. Here, the IMs in the observed data are predicted from the migration image and are subsequently removed by adaptive subtraction. This prediction is enabled by the knowledge of interior transmission traveltimes τpq computed according to Fermat's interferometric principle. We denote this principle as the `traveltime holographic principle', by analogy with the holographic principle in cosmology where information in a volume is encoded on the region's boundary.

  9. Occurrence and removal of pharmaceuticals and personal care products (PPCPs) in an advanced wastewater reclamation plant.

    Science.gov (United States)

    Yang, Xin; Flowers, Riley C; Weinberg, Howard S; Singer, Philip C

    2011-10-15

    The occurrence of nineteen pharmaceutically active compounds and personal care products was followed monthly for 12 months after various stages of treatment in an advanced wastewater reclamation plant in Gwinnett County, GA, U.S.A. Twenty-four hour composite samples were collected after primary clarification, activated sludge biological treatment, membrane filtration, granular media filtration, granular activated carbon (GAC) adsorption, and ozonation in the wastewater reclamation plant. Compounds were identified and quantified using high performance liquid chromatography/tandem mass spectrometry (LC-MS/MS) and gas chromatography/mass spectrometry (GC-MS) after solid-phase extraction. Standard addition methods were employed to compensate for matrix effects. Sixteen of the targeted compounds were detected in the primary effluent; sulfadimethoxine, doxycycline, and iopromide were not found. Caffeine and acetaminophen were found at the highest concentrations (∼10(5) ng/L), followed by ibuprofen (∼10(4) ng/L), sulfamethoxazole and DEET (∼10(3) ng/L). Most of the other compounds were found at concentrations on the order of hundreds of ng/L. After activated sludge treatment and membrane filtration, the concentrations of caffeine, acetaminophen, ibuprofen, DEET, tetracycline, and 17α-ethynylestradiol (EE2) had decreased by more than 90%. Erythromycin and carbamazepine, which were resistant to biological treatment, were eliminated by 74 and 88%, on average, by GAC. Primidone, DEET, and caffeine were not amenable to adsorption by GAC. Ozonation oxidized most of the remaining compounds by >60%, except for primidone and DEET. Of the initial 16 compounds identified in the primary effluent, only sulfamethoxazole, primidone, caffeine and DEET were frequently detected in the final effluent, but at concentrations on the order of 10-100 ng/L. Removal of the different agents by the various treatment processes was related to the physical-chemical properties of the

  10. Jatropha curcas : a biodiesel plant in reclamation of silica mining area

    Energy Technology Data Exchange (ETDEWEB)

    Dubey, K.; Tiwari, A.; Singh, V.K. [Centre for Social Forestry and Eco-Rehabilitation, Allahabad (India); Dubey, K.P. [Allahabad Forest Division, Allahabad (India); Negi, S.S. [Forest Research Inst. Uttaranchal (India)

    2006-07-01

    India's aggregate mineral production in 1999-2000 was approximately 550 million tonnes, contributed from 3,100 producing coal, lignite, limestone, iron ore, bauxite, copper, lead and zinc. Over 80 per cent of the mineral production comes from open pit mines. While silica sand can be found in several Indian states, the major mines of quality silica sand are in the Allahabad District of the Uttar Pradesh State. For the past 3 decades, extensive open pit silica mining activities have caused significant damage to the forests and productivity of the region. As such, the reclamation of this mining area has become a priority to impede environmental hazards and restore ecological balance. A critical measure in reclaiming this mining area involves the appropriate selection of species that will adapt to climatic and local soil conditions. The oil plant Jatropha curcas is a drought resistant large shrub or tree that has the advantage of rapid growth on marginal land and the ability to reclaim problematic lands. It also has a high level of carbon absorption from the atmosphere, which is stored in the woody tissues of the plant to help build up of soil carbon. As such, the crop earns carbon credits. This paper reported on a plantation trial in the silica mine area of Shankargarh in Allahabad District where the growth performance of different provenances of Jatropha curcas was investigated under rain fed conditions. The plant was shown to offer the option of both cultivating wastelands and to produce vegetable oil suitable for conversion to bio-diesel and other economically important by products as an alternative resource of rural income in poverty-stricken areas. 12 refs., 1 tab.

  11. Reclamation after oil and gas development does not speed up succession or plant community recovery in big sagebrush ecosystems in Wyoming

    Science.gov (United States)

    Rottler, Caitlin M.; Burke, Ingrid C.; Palmquist, Kyle A.; Bradford, John B.; Lauenroth, William K.

    2018-01-01

    Article for intended outlet: Restoration Ecology. Abstract: Reclamation is an application of treatment(s) following a disturbance to promote succession and accelerate the return of target conditions. Previous studies have framed reclamation in the context of succession by studying its effectiveness in re-establishing late-successional plant communities. Re-establishment of these plant communities is especially important and potentially challenging in regions such as drylands and shrub steppe ecosystems where succession proceeds slowly. Dryland shrub steppe ecosystems are frequently associated with areas rich in fossil-fuel energy sources, and as such the need for effective reclamation after disturbance from fossil-fuel-related energy development is great. Past research in this field has focused primarily on coal mines; few researchers have studied reclamation after oil and gas development. To address this research gap and to better understand the effect of reclamation on rates of succession in dryland shrub steppe ecosystems, we sampled oil and gas wellpads and adjacent undisturbed big sagebrush plant communities in Wyoming, USA and quantified the extent of recovery for major functional groups on reclaimed and unreclaimed (recovered via natural succession) wellpads relative to the undisturbed plant community. Reclamation increased the rate of recovery for all forb and grass species as a group and for perennial grasses, but did not affect other functional groups. Rather, analyses comparing recovery to environmental variables and time since wellpad abandonment showed that recovery of other groups were affected primarily by soil texture and time since wellpad abandonment. This is consistent with studies in other ecosystems where reclamation has been implemented, suggesting that reclamation may not help re-establish late-successional plant communities more quickly than they would re-establish naturally.

  12. Conditions of Thermal Reclamation Process Realization on a Sample of Spent Moulding Sand from an Aluminum Alloy Foundry Plant

    Directory of Open Access Journals (Sweden)

    Łucarz M.

    2017-06-01

    Full Text Available The results of investigations of thermal reclamation of spent moulding sands originating from an aluminum alloy foundry plant are presented in this paper. Spent sands were crushed by using two methods. Mechanical fragmentation of spent sand chunks was realized in the vibratory reclaimer REGMAS. The crushing process in the mechanical device was performed either with or without additional crushing-grinding elements. The reclaimed material obtained in this way was subjected to thermal reclamations at two different temperatures. It was found that a significant binder gathering on grain surfaces favors its spontaneous burning, even in the case when a temperature lower than required for the efficient thermal reclamation of furan binders is applied in the thermal reclaimer. The burning process, initiated by gas burners in the reclaimer chamber, generates favorable conditions for self-burning (at a determined amount of organic binders on grain surfaces. This process is spontaneously sustained and decreases the demand for gas. However, due to the significant amount of binder, this process is longer than in the case of reclaiming moulding sand prepared with fresh components.

  13. Prestack traveltime approximations

    KAUST Repository

    Alkhalifah, Tariq Ali

    2012-05-01

    Many of the explicit prestack traveltime relations used in practice are based on homogeneous (or semi-homogenous, possibly effective) media approximations. This includes the multifocusing, based on the double square-root (DSR) equation, and the common reflection stack (CRS) approaches. Using the DSR equation, I constructed the associated eikonal form in the general source-receiver domain. Like its wave-equation counterpart, it suffers from a critical singularity for horizontally traveling waves. As a result, I recasted the eikonal in terms of the reflection angle, and thus, derived expansion based solutions of this eikonal in terms of the difference between the source and receiver velocities in a generally inhomogenous background medium. The zero-order term solution, corresponding to ignoring the lateral velocity variation in estimating the prestack part, is free of singularities and can be used to estimate traveltimes for small to moderate offsets (or reflection angles) in a generally inhomogeneous medium. The higher-order terms include limitations for horizontally traveling waves, however, we can readily enforce stability constraints to avoid such singularities. In fact, another expansion over reflection angle can help us avoid these singularities by requiring the source and receiver velocities to be different. On the other hand, expansions in terms of reflection angles result in singularity free equations. For a homogenous background medium, as a test, the solutions are reasonably accurate to large reflection and dip angles. A Marmousi example demonstrated the usefulness and versatility of the formulation. © 2012 Society of Exploration Geophysicists.

  14. Focus on land reclamation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    Various aspects of land reclamation, i.e. returning disturbed land to a state where, at minimum, it is at least capable of supporting the same kinds of land uses as before the disturbance, are discussed. Activities which disturb the land such as surface mining of coal, surface mining and extraction of oil sands, drilling for oil and natural gas, waste disposal sites, including sanitary landfills, clearing timber for forestry, excavating for pipelines and transportation are described, along with land reclamation legislation in Alberta, and indications of future developments in land reclamation research, legislation and regulation. Practical guidelines for individuals are provided on how they might contribute to land reclamation through judicious and informed consumerism, and through practicing good land management, inclusive of reduced use of herbicides, composting of household wastes, and planting of native species or ground cover in place of traditional lawns.

  15. Prestack traveltime approximations

    KAUST Repository

    Alkhalifah, Tariq Ali

    2011-01-01

    Most prestack traveltime relations we tend work with are based on homogeneous (or semi-homogenous, possibly effective) media approximations. This includes the multi-focusing or double square-root (DSR) and the common reflection stack (CRS) equations. Using the DSR equation, I analyze the associated eikonal form in the general source-receiver domain. Like its wave-equation counterpart, it suffers from a critical singularity for horizontally traveling waves. As a result, I derive expansion based solutions of this eikonal based on polynomial expansions in terms of the reflection and dip angles in a generally inhomogenous background medium. These approximate solutions are free of singularities and can be used to estimate travetimes for small to moderate offsets (or reflection angles) in a generally inhomogeneous medium. A Marmousi example demonstrates the usefulness of the approach. © 2011 Society of Exploration Geophysicists.

  16. Plutonium discharges to the sanitary sewer: Health impacts at the Livermore Water Reclamation Plant

    International Nuclear Information System (INIS)

    Balke, B.K.

    1993-01-01

    The Lawrence Livermore National Laboratory (LLNL) is the largest discharger of sewage treated by the Livermore Water Reclamation (LWRP), contributing approximately 7% by volume of the LWRP influent LILNL operations, as potential sources both of industrial pollutants and radioactivity, are therefore of particular concern to the LWRP. For this reason, LLNL has maintained vigorous wastewater discharge control and monitoring programs. In particular, the monitoring program has demonstrated that, except in a few rare instances, the concentration of contaminants in LLNL effluent have always remained below the appropriate regulatory standards. The exceptions have generally been due to inadvertent discharges of metals-bearing solutions produced by metal plating or cleaning operations

  17. Proposing of an aerated water treatment plant for reducing water pollution problem in Losari Beach after reclamation

    Science.gov (United States)

    Suryani, Sri; Maharani, Hamzah, Muhammad Alimuddin

    2017-01-01

    Losari Beach is the most important site in Makassar. It lies at the west side of Makassar city. This place is known as the place where people are relaxed and gathering with friends or family after working, and now it becomes the icon of Makassar city. As the biggest city in eastern Indonesia, Makassar grows very fast. We can find constructions for building hospitals, shopping malls, bussines activities, and residences everywhere. The most important construction activities that will effect Losari Beach is the reclamation to build the Center Point of Indonesia that takes an area of 157 hectares and it is located at the west side of Losari Beach. In the last research presented in 9th International Conference on Marine Technology (October 2014) using surface-water modeling system (SMS) software showed that reclamation will significantly increase concentrations of BOD and COD (± 7 mg/L for BOD and 6.2 mg/L for COD). This condition will cause Losari Beach becomes very polluted. A probable solution to overcome this problem is to clean the wastewater before introducing to the sea. This paper will describe the type of the wastewater treatment plant that can be used to solve the water pollution problem in Losari Beach.

  18. Coal refuse reclamation project

    Energy Technology Data Exchange (ETDEWEB)

    Zellmer, S.D.

    1979-04-06

    A 13.8 ha abandoned coal refuse site in southwestern Illinois was reclaimed by recontouring the refuse material and covering it with a minimum 30 cm of soil. The reclamation procedure included determination of the site's final land use, collection of preconstruction environmental data, and development and implementation of engineering plans. The project is demonstrating methods that can be used to reclaim abandoned coal refuse sites, and a multidisciplinary approach is being used to evaluate postconstruction environmental and economic effects of the reclamation effort. Surface water quality has shown significant improvement and plant cover is becoming established on the site. Soil microbial populations are developing and wildlife habitats are forming. The economic value of the site and adjacent properties has increased substantially and the area's aesthetic value has been enhanced. This project is providing valuable design data for future reclamation efforts of this type.

  19. The influence of arbuscular mycorrhizae on root precision nutrient foraging of two pioneer plant species during early reclamation

    Science.gov (United States)

    Boldt-Burisch, Katja; Naeth, M. Anne

    2017-04-01

    for nutrients and could therefore play an important role in early plant establishment on infertile reclamation sites.

  20. Increasing Crop Yields in Water Stressed Countries by Combining Operations of Freshwater Reservoir and Wastewater Reclamation Plant

    Science.gov (United States)

    Bhushan, R.; Ng, T. L.

    2015-12-01

    Freshwater resources around the world are increasing in scarcity due to population growth, industrialization and climate change. This is a serious concern for water stressed countries, including those in Asia and North Africa where future food production is expected to be negatively affected by this. To address this problem, we investigate the potential of combining freshwater reservoir and wastewater reclamation operations. Reservoir water is the cheaper source of irrigation, but is often limited and climate sensitive. Treated wastewater is a more reliable alternative for irrigation, but often requires extensive further treatment which can be expensive. We propose combining the operations of a reservoir and a wastewater reclamation plant (WWRP) to augment the supply from the reservoir with reclaimed water for increasing crop yields in water stressed regions. The joint system of reservoir and WWRP is modeled as a multi-objective optimization problem with the double objective of maximizing the crop yield and minimizing total cost, subject to constraints on reservoir storage, spill and release, and capacity of the WWRP. We use the crop growth model Aquacrop, supported by The Food and Agriculture Organization of the United Nations (FAO), to model crop growth in response to water use. Aquacrop considers the effects of water deficit on crop growth stages, and from there estimates crop yield. We generate results comparing total crop yield under irrigation with water from just the reservoir (which is limited and often interrupted), and yield with water from the joint system (which has the potential of higher supply and greater reliability). We will present results for locations in India and Africa to evaluate the potential of the joint operations for improving food security in those areas for different budgets.

  1. Validation of Born Traveltime Kernels

    Science.gov (United States)

    Baig, A. M.; Dahlen, F. A.; Hung, S.

    2001-12-01

    Most inversions for Earth structure using seismic traveltimes rely on linear ray theory to translate observed traveltime anomalies into seismic velocity anomalies distributed throughout the mantle. However, ray theory is not an appropriate tool to use when velocity anomalies have scale lengths less than the width of the Fresnel zone. In the presence of these structures, we need to turn to a scattering theory in order to adequately describe all of the features observed in the waveform. By coupling the Born approximation to ray theory, the first order dependence of heterogeneity on the cross-correlated traveltimes (described by the Fréchet derivative or, more colourfully, the banana-doughnut kernel) may be determined. To determine for what range of parameters these banana-doughnut kernels outperform linear ray theory, we generate several random media specified by their statistical properties, namely the RMS slowness perturbation and the scale length of the heterogeneity. Acoustic waves are numerically generated from a point source using a 3-D pseudo-spectral wave propagation code. These waves are then recorded at a variety of propagation distances from the source introducing a third parameter to the problem: the number of wavelengths traversed by the wave. When all of the heterogeneity has scale lengths larger than the width of the Fresnel zone, ray theory does as good a job at predicting the cross-correlated traveltime as the banana-doughnut kernels do. Below this limit, wavefront healing becomes a significant effect and ray theory ceases to be effective even though the kernels remain relatively accurate provided the heterogeneity is weak. The study of wave propagation in random media is of a more general interest and we will also show our measurements of the velocity shift and the variance of traveltime compare to various theoretical predictions in a given regime.

  2. Simultaneous nitrification, denitrification and phosphorus removal (SNDPR) in a full-scale water reclamation plant located in warm climate.

    Science.gov (United States)

    Yang, Qin; Shen, Nan; Lee, Zarraz M-P; Xu, Guangjing; Cao, Yeshi; Kwok, Beehong; Lay, Winson; Liu, Yu; Zhou, Yan

    The combination of simultaneous nitrification-denitrification (SND) with enhanced biological phosphorus removal (EBPR) provides a more efficient and economically viable option for nutrient removal from municipal wastewater compared to conventional two-step nitrification-denitrification. This study analyzed the nutrients (N and P) profiles in a full-scale municipal wastewater reclamation plant (WRP) located in the tropical region, in which more than 90% of nitrogen was removed. Interestingly, average SND efficiency in aerobic zones was found to be up to 50%, whereas phosphorus profile displayed a clear cyclic release and uptake pattern with a phosphorus removal efficiency of up to 76%. The capability of sludge to perform SND and EBPR was further confirmed through a series of batch experiments. Microbial analysis revealed the presence of Accumulibacter and Tetrasphaera phosphate accumulating organisms in the plant, while few glycogen accumulating organisms (GAO) was observed. This study showed the significant occurrence of combined SND and EBPR, known as simultaneous nitrification, denitrification and phosphorus removal (SNDPR), in the studied WRP under warm climate. The possible causes behind the observed SNDPR were also discussed.

  3. Cyber-physical system for a water reclamation plant: Balancing aeration, energy, and water quality to maintain process resilience

    Science.gov (United States)

    Zhu, Junjie

    Aeration accounts for a large fraction of energy consumption in conventional water reclamation plants (WRPs). Although process operations at older WRPs can satisfy effluent permit requirements, they typically operate with excess aeration. More effective process controls at older WRPs can be challenging as operators work to balance higher energy costs and more stringent effluent limitations while managing fluctuating loads. Therefore, understandings of process resilience or ability to quickly return to original operation conditions at a WRP are important. A state-of-art WRP should maintain process resilience to deal with different kinds of perturbations even after optimization of energy demands. This work was to evaluate the applicability and feasibility of cyber-physical system (CPS) for improving operation at Metropolitan Water Reclamation District of Greater Chicago (MWRDGC) Calumet WRP. In this work, a process model was developed and used to better understand the conditions of current Calumet WRP, with additional valuable information from two dissolved oxygen field measurements. Meanwhile, a classification system was developed to reveal the pattern of historical influent scenario based on cluster analysis and cross-tabulation analysis. Based on the results from the classification, typical process control options were investigated. To ensure the feasibility of information acquisition, the reliability and flexibility of soft sensors were assessed to typical influent conditions. Finally, the process resilience was investigated to better balance influent perturbations, energy demands, and effluent quality for long-term operations. These investigations and evaluations show that although the energy demands change as the influent conditions and process controls. In general, aeration savings could be up to 50% from the level of current consumption; with a more complex process controls, the saving could be up to 70% in relatively steady-state conditions and at least 40

  4. Legal aspects of the clean-up and reclamation of the manufactured gas plants

    Energy Technology Data Exchange (ETDEWEB)

    Joldzic, V. [Belgrade University, Belgrade (Yugoslavia). Inst. for Criminology and Sociological Research

    1995-12-31

    The laws associated with the cleanup of manufactured gas plants in Yugoslavia is described. These comprise the Environmental Protection Act; the Law about Space Planning and Organizing; Building Law; and Agricultural Land Use Law. Joint remedial action in the Danube Basin is discussed. 13 refs.

  5. Reclamation Of Plant Wastes (Straw And Obtaining (Nano Chips With Bactericidal Properties Based On Them

    Directory of Open Access Journals (Sweden)

    Leonidovna Voropaeva Nadezda

    2015-09-01

    Full Text Available Rape, camelina, wheat and Jerusalem artichoke vegetable wastes (straw as annually renewable raw materials were processed into activated carbons, which were modified with silver nanoparticles for carbonaceous sorbents to acquire specific properties, since carbonaceous sorbents are usually widely used in the food industry, agriculture, medicine and other fields of human activity. The technology to obtain active carbons from agricultural crop residues has been developed, active carbon physico-chemical and adsorption properties, textural characteristics have been studied, new functional carbon (nano materials with antibacterial activity containing (nano particles of silver have been obtained, their influence within (nano chip composition on rape crop growth, development and yield has been studied. In the conducted field tests, the highest activity was noted when using the (nano chip whose structure included RAC - camelina and silver nanoparticles. Besides, when nano chips are used for seed treatment, the yield increase makes up 11.6 % for nanoparticles containing Ag, for plant active carbons (PAC (rape with Ag this index makes up 28.1 %, for RAC (Camelina with Ag it makes up 55.8 % (compared to the control variant, which can be explained by the differences in the sorption characteristics of the studied radio activated carbons. Our results and the previous studies of other authors can prove the fact that silver nanoparticles (including those being a part of (nano chips “get” into the biochemical processes and have a pronounced phytostimulating effect on plants, which was especially obvious when suppressing the activity of plant pathogenic microflora by silver nanoparticles.

  6. Application of pressure assisted forward osmosis for water purification and reuse of reverse osmosis concentrate from a water reclamation plant

    KAUST Repository

    Jamil, Shazad

    2016-07-26

    The use of forward osmosis (FO) is growing among the researchers for water desalination and wastewater treatment due to use of natural osmotic pressure of draw solute. In this study pressure assisted forward osmosis (PAFO) was used instead of FO to increase the water production rate. In this study a low concentration of draw solution (0.25 M KCl) was applied so that diluted KCl after PAFO operation can directly be used for fertigation. The performance of PAFO was investigated for the treatment of reverse osmosis concentrate (ROC) from a water reclamation plant. The water production in PAFO was increased by 9% and 29% at applied pressure of 2 and 4 bars, respectively, to feed side based on 90 h of experiments. Granular activated carbon (GAC) pretreatment and HCl softening were used to reduce organic fouling and scaling prior to application of PAFO. It reduced total organic carbon (TOC) and total inorganic carbon (TIC) by around 90% and 85%, respectively from untreated ROC. Subsequently, this led to an increase in permeate flux. In addition, GAC pretreatment adsorbed 12 out of 14 organic micropollutants tested from ROC to below detection limit. This application enabled to minimise the ROC volume with a sustainable operation and produced high quality and safe water for discharge or reuse. The draw solution (0.25 M KCl) used in this study was diluted to 0.14 M KCl, which is a suitable concentration (10 kg/m3) for fertigation, due to water transport from feed solution. © 2016 Elsevier B.V.

  7. Integrated system of phytodepuration and water reclamation: A comparative evaluation of four municipal wastewater treatment plants.

    Science.gov (United States)

    Petroselli, Andrea; Giannotti, Maurizio; Marras, Tatiana; Allegrini, Elena

    2017-06-03

    In dry regions, water resources have become increasingly limited, and the use of alternative sources is considered one of the main strategies in sustainable water management. A highly viable alternative to commonly used water resources is treated municipal wastewater, which could strongly benefit from advanced and low-cost techniques for depuration, such as the integrated system of phytodepuration (ISP). The current manuscript investigates four Italian case studies with different sizes and characteristics. The raw wastewaters and final effluents were sampled on a monthly basis over a period of up to five years, allowing the quantification of the ISP performances. The results obtained show that the investigated plants are characterized by an average efficiency value of approximately 83% for chemical oxygen demand removal, 84% for biochemical oxygen demand, 89% for total nitrogen, 91% for total phosphorus, and 85% for total suspended solids. Moreover, for three of the case studies, the ISP final effluent is suitable for irrigation, and in the fourth case study, the final effluent can be released in surface water.

  8. Demonstration of a full-scale plant using an UASB followed by a ceramic MBR for the reclamation of industrial wastewater.

    Science.gov (United States)

    Niwa, Terutake; Hatamoto, Masashi; Yamashita, Takuya; Noguchi, Hiroshi; Takase, Osamu; Kekre, Kiran A; Ang, Wui Seng; Tao, Guihe; Seah, Harry; Yamaguchi, Takashi

    2016-10-01

    This study comprehensively evaluated the performance of a full-scale plant (4550m(3)d(-1)) using a UASB reactor followed by a ceramic MBR for the reclamation and reuse of mixed industrial wastewater containing many inorganics, chemical, oil and greases. This plant was demonstrated as the first full-scale system to reclaim the mixed industrial wastewater in the world. During 395days of operation, influent chemical oxygen demand (COD) fluctuated widely, but this system achieved COD removal rate of 91% and the ceramic MBR have operated flux of 21-25LMH stably. This means that this system adsorbed the feed water fluctuation and properly treated the water. Energy consumption of this plant was achieved 0.76kWhmm(-3) and this value is same range of domestic sewage MBR system. The combination of an UASB reactor and ceramic MBR is the most economical and feasible solution for water reclamation of mixed industrial wastewater. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Impacts of oil sands process water on fen plants: Implications for plant selection in required reclamation projects

    International Nuclear Information System (INIS)

    Pouliot, Rémy; Rochefort, Line; Graf, Martha D.

    2012-01-01

    Fen plant growth in peat contaminated with groundwater discharges of oil sands process water (OSPW) was assessed in a greenhouse over two growing seasons. Three treatments (non-diluted OSPW, diluted OSPW and rainwater) were tested on five vascular plants and four mosses. All vascular plants tested can grow in salinity and naphthenic acids levels currently produced by oil sands activity in northwestern Canada. No stress sign was observed after both seasons. Because of plant characteristics, Carex species (C. atherodes and C. utriculata) and Triglochin maritima would be more useful for rapidly restoring vegetation and creating a new peat-accumulating system. Groundwater discharge of OSPW proved detrimental to mosses under dry conditions and ensuring adequate water levels would be crucial in fen creation following oil sands exploitation. Campylium stellatum would be the best choice to grow in contaminated areas and Bryum pseudotriquetrum might be interesting as it has spontaneously regenerated in all treatments. - Highlights: ► Fen plant growth was assessed under groundwater discharges of oil sands process water. ► Sedge and grass species were not stressed after two growing seasons in greenhouse. ► Carex species and Triglochin maritima would be helpful in created contaminated fens. ► In dry conditions, contaminated groundwater discharge was detrimental for mosses. ► Campylium stellatum would be the best choice in created fens with contaminated water. - Sedges and grasses tolerated the contact with oil sands process water and could probably grow well in contaminated created fens, but mosses were particularly affected under dry conditions.

  10. Traveltime approximations for inhomogeneous HTI media

    KAUST Repository

    Alkhalifah, Tariq Ali

    2011-01-01

    Traveltimes information is convenient for parameter estimation especially if the medium is described by an anisotropic set of parameters. This is especially true if we could relate traveltimes analytically to these medium parameters, which is generally hard to do in inhomogeneous media. As a result, I develop traveltimes approximations for horizontaly transversely isotropic (HTI) media as simplified and even linear functions of the anisotropic parameters. This is accomplished by perturbing the solution of the HTI eikonal equation with respect to η and the azimuthal symmetry direction (usually used to describe the fracture direction) from a generally inhomogeneous elliptically anisotropic background medium. The resulting approximations can provide accurate analytical description of the traveltime in a homogenous background compared to other published moveout equations out there. These equations will allow us to readily extend the inhomogenous background elliptical anisotropic model to an HTI with a variable, but smoothly varying, η and horizontal symmetry direction values. © 2011 Society of Exploration Geophysicists.

  11. Full traveltime inversion in source domain

    KAUST Repository

    Liu, Lu; Guo, Bowen; Luo, Yi

    2017-01-01

    This paper presents a new method of source-domain full traveltime inversion (FTI). The objective of this study is automatically building near-surface velocity using the early arrivals of seismic data. This method can generate the inverted velocity

  12. Parameter Identification of an Ultrafiltration Model for Organics Removal in a Full-Scale Wastewater Reclamation Plant with Sparse and Incomplete Monitoring Data.

    Directory of Open Access Journals (Sweden)

    Fu Sun

    Full Text Available Ultrafiltration (UF has become one of the dominant treatment processes for wastewater reclamation in China. Modeling is an effective instrument to understand and optimize UF systems. To this end, a previously developed UF model for organics removal was applied to the UF process in a typical, full-scale wastewater reclamation plant (WRP in China. However, the sparse and incomplete field monitoring data from the studied WRP made the traditional model analysis approaches hardly work in this case. Therefore, two strategies, namely Strategy 1 and Strategy 2, were proposed, following a regional sensitivity analysis approach, for model parameter identification. Strategy 1 aimed to identify the model parameters and the missing model input, i.e. sampling times, simultaneously, while Strategy 2 tried to separate these two processes to reduce the dimension of the identification problem through an iteration procedure. With these two strategies, the model performed well in the Qinghe WRP with the absolute relative errors between the simulated and observed total organic carbon (TOC generally below 10%. The four model parameters were all sensitive and identifiable, and even the sampling times could be roughly identified. Given the incomplete model input, these results were encouraging and added to the trustworthiness of model when it was applied to the Qinghe WRP.

  13. Reclamation of urban wastewaters in an experimental plant with tertiary treatment; Regeneracion de aguas residuales urbanas en una planta piloto mediante tratamientos terciariarios

    Energy Technology Data Exchange (ETDEWEB)

    Lopez-Ramirez, J. A.; Sahuquillo, S.; Sales, D.; Quiroga, J. M. [Universidad de Cadiz (Spain)

    1999-07-01

    Among the most interesting techniques for reclamation or urban wastewaters, reverse osmosis stands out, because the good results obtained in several facilities. In this paper results of the operation of an experimental Reverse Osmosis (RO) pilot plant of 100 cu. m/day capacity, for the reuse or urban wastewaters are showed. Membranes used were of cellulose acetate and previously has been optimized in laboratory, the dose of reagents used in pretreatment in order to minimize, as far as possible, any type of fouling. The water quality obtained under the conditions determined as optimum is high, this quality allows the water to be injected into a local aquifer to counteract seawater intrusion. (Author) 16 refs.

  14. Q-P Wave traveltime computation by an iterative approach

    KAUST Repository

    Ma, Xuxin; Alkhalifah, Tariq Ali

    2013-01-01

    In this work, we present a new approach to compute anisotropic traveltime based on solving successively elliptical isotropic traveltimes. The method shows good accuracy and is very simple to implement.

  15. Fermat's principle and nonlinear traveltime tomography

    International Nuclear Information System (INIS)

    Berryman, J.G.; Courant Institute of Mathematical Sciences, New York University, 251 Mercer Street, New York, New York 10012)

    1989-01-01

    Fermat's principle shows that a definite convex set of feasible slowness models, depending only on the traveltime data, exists for the fully nonlinear traveltime inversion problem. In a new iterative reconstruction algorithm, the minimum number of nonfeasible ray paths is used as a figure of merit to determine the optimum size of the model correction at each step. The numerical results show that the new algorithm is robust, stable, and produces very good reconstructions even for high contrast materials where standard methods tend to diverge

  16. Ray-tracing traveltime tomography versus wave-equation traveltime inversion for near-surface seismic land data

    KAUST Repository

    Fu, Lei; Hanafy, Sherif M.

    2017-01-01

    . This initial starting model can be obtained by inverting traveltimes with ray-tracing traveltime tomography (RT) or wave-equation traveltime (WT) inversion. We have found that WT can provide a more accurate tomogram than RT by inverting the first

  17. Wave-equation reflection traveltime inversion

    KAUST Repository

    Zhang, Sanzong

    2011-01-01

    The main difficulty with iterative waveform inversion using a gradient optimization method is that it tends to get stuck in local minima associated within the waveform misfit function. This is because the waveform misfit function is highly nonlinear with respect to changes in the velocity model. To reduce this nonlinearity, we present a reflection traveltime tomography method based on the wave equation which enjoys a more quasi-linear relationship between the model and the data. A local crosscorrelation of the windowed downgoing direct wave and the upgoing reflection wave at the image point yields the lag time that maximizes the correlation. This lag time represents the reflection traveltime residual that is back-projected into the earth model to update the velocity in the same way as wave-equation transmission traveltime inversion. No travel-time picking is needed and no high-frequency approximation is assumed. The mathematical derivation and the numerical examples are presented to partly demonstrate its efficiency and robustness. © 2011 Society of Exploration Geophysicists.

  18. A new traveltime approximation for TI media

    KAUST Repository

    Stovas, Alexey; Alkhalifah, Tariq Ali

    2012-01-01

    In a transversely isotropic (TI) medium, the trade-off between inhomogeneity and anisotropy can dramatically reduce our capability to estimate anisotropy parameters. By expanding the TI eikonal equation in power series in terms of the aneliptic parameter η, we derive an efficient tool to estimate (scan) for η in a generally inhomogeneous, elliptically anisotropic background medium. For a homogeneous-tilted transversely isotropic medium, we obtain an analytic nonhyperbolic moveout equation that is accurate for large offsets. In the common case where we do not have well information and it is necessary to resolve the vertical velocity, the background medium can be assumed isotropic, and the traveltime equations becomes simpler. In all cases, the accuracy of this new TI traveltime equation exceeds previously published formulations and demonstrates how η is better resolved at small offsets when the tilt is large.

  19. A new traveltime approximation for TI media

    KAUST Repository

    Stovas, Alexey

    2012-07-01

    In a transversely isotropic (TI) medium, the trade-off between inhomogeneity and anisotropy can dramatically reduce our capability to estimate anisotropy parameters. By expanding the TI eikonal equation in power series in terms of the aneliptic parameter η, we derive an efficient tool to estimate (scan) for η in a generally inhomogeneous, elliptically anisotropic background medium. For a homogeneous-tilted transversely isotropic medium, we obtain an analytic nonhyperbolic moveout equation that is accurate for large offsets. In the common case where we do not have well information and it is necessary to resolve the vertical velocity, the background medium can be assumed isotropic, and the traveltime equations becomes simpler. In all cases, the accuracy of this new TI traveltime equation exceeds previously published formulations and demonstrates how η is better resolved at small offsets when the tilt is large.

  20. Regulation of strontium migration and translocation in chemical reclamation of acid soils

    International Nuclear Information System (INIS)

    Velichko, V.A.; Okonskij, A.I.; Shestakov, E.I.; Panov, N.P.

    1993-01-01

    Results of chemical testing are presented of the local reclamants (ashes of various deposits and ferrochromium plant slags) to study the possibilities of their use for chemical soil reclamation. Attention was paid to the investigation of pollutant (strontium) behaviour in the reclamant-acid soil-plant-ground water system. Tracer method was used, 85 Sr was applied as a label. Prospects of zeolite application to control the strontium behaviour following the reclamant introduction into soil were considered. It was shown that zeolite application permitted to regulate strontium behaviour in the reclamant-soil-plant-ground water system. At that the modified zeolites possessing high Sr selectivity are recommended for application

  1. Land reclamation program description

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-05-01

    The Land Reclamation Program will address the need for coordinated applied and basic research into the physical and ecological problems of land reclamation, and advance the development of cost-effective techniques for reclaiming and rehabilitating mined coal land to productive end uses. The purpose of this new program is to conduct integrated research and development projects focused on near- and long-term reclamation problems in all major U.S. coal resource regions including Alaska and to coordinate, evaluate, and disseminate the results of related studies conducted at other research institutions. The activities of the Land Reclamation Laboratory program will involve close cooperation with industry and focus on establishing a comprehensive field and laboratory effort. Research demonstration sites will be established throughout the United States to address regional and site-specific problems. Close cooperation with related efforts at academic institutions and other agencies, to transfer pertinent information and avoid duplication of effort, will be a primary goal of the program. The major effort will focus on the complete coal extraction/reclamation cycle where necessary to develop solutions to ameliorating the environmental impacts of coal development. A long-range comprehensive national reclamation program will be established that can schedule and prioritize research activities in all of the major coal regions. A fully integrated data management system will be developed to store and manage relevant environmental and land use data. Nine research demonstration sites have been identified.

  2. Efficient traveltime compression for 3D prestack Kirchhoff migration

    KAUST Repository

    Alkhalifah, Tariq

    2010-12-13

    Kirchhoff 3D prestack migration, as part of its execution, usually requires repeated access to a large traveltime table data base. Access to this data base implies either a memory intensive or I/O bounded solution to the storage problem. Proper compression of the traveltime table allows efficient 3D prestack migration without relying on the usually slow access to the computer hard drive. Such compression also allows for faster access to desirable parts of the traveltime table. Compression is applied to the traveltime field for each source location on the surface on a regular grid using 3D Chebyshev polynomial or cosine transforms of the traveltime field represented in the spherical coordinates or the Celerity domain. We obtain practical compression levels up to and exceeding 20 to 1. In fact, because of the smaller size traveltime table, we obtain exceptional traveltime extraction speed during migration that exceeds conventional methods. Additional features of the compression include better interpolation of traveltime tables and more stable estimates of amplitudes from traveltime curvatures. Further compression is achieved using bit encoding, by representing compression parameters values with fewer bits. © 2010 European Association of Geoscientists & Engineers.

  3. Remediation and reclamation of soils heavily contaminated with toxic metals as a substrate for greening with ornamental plants and grasses.

    Science.gov (United States)

    Jelusic, Masa; Lestan, Domen

    2015-11-01

    Soils highly contaminated with toxic metals are currently treated as waste despite their potential inherent fertility. We applied EDTA washing technology featuring chelant and process water recovery for remediation of soil with 4037, 2527, and 26 mg kg(-1) of Pb, Zn and Cd, respectively in a pilot scale. A high EDTA dose (120 mmol kg(-1) of soil) removed 70%, 15%, and 58% of Pb, Zn, and Cd, respectively, and reduced human oral bioaccessibility of Pb below the limit of quantification and that of Zn and Cd 3.4 and 3.2 times. In a lysimeters experiment, the contaminated and remediated soils were laid into two garden beds (4×1×0.15 m) equipped with lysimeters, and subjected to cultivation of ornamental plants: Impatiens walleriana, Tagetes erecta, Pelargonium×peltatum, and Verbena×hybrida and grasses: Dactylis glomerata, Lolium multiflorum, and Festuca pratensis. Plants grown on remediated soil demonstrated the same or greater biomass yield and reduced the uptake of Pb, Zn and Cd up to 10, 2.5 and 9.5 times, respectively, compared to plants cultivated on the original soil. The results suggest that EDTA remediation produced soil suitable for greening. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. The state of oil sands wetland reclamation

    Energy Technology Data Exchange (ETDEWEB)

    Foote, L. [Alberta Univ., Edmonton, AB (Canada)

    2010-07-01

    The state of oil sand and wetlands reclamation was the subject of this presentation. Wildlife habitat and response, plant community and production, and microbial biology were examples of research areas surrounding this body of knowledge. Hydrological research and landscape ecology were discussed along with peatlands and marshes such as the Corvette and the Kia. A few examples of what has been learned in the area of wetlands reclamation was presented. Other topics were also discussed, such as timeframes, pragmatic policy approaches, reclamation costs, research needs and some ideas on maturing the field. It was concluded that environmental conditions change with time and area because of time, chemistry, physics, stoichiometry, as well as biotic mediation and facilitation. figs.

  5. Access road reclamation

    International Nuclear Information System (INIS)

    Manson, T.; Blok, M.

    1997-01-01

    A general review of the measures involved in restoring abandoned access road sites in British Columbia was presented. Permits and licences are needed for the use of crown land for roads used by the petroleum and natural gas industry for exploration activities. However, the regulatory framework for road site reclamation is not well developed. The nature of access road reclamation is very site-specific. Some of the issues that are considered for all reclamation projects include slope stability, water control, revegetation, soil rehabilitation, access management and monitoring. The primary objective of reclaiming access road sites is to return the site to conditions that are equal or better than pre-disturbance conditions. Restoration measures must be approved by BC Environment and by the Department of Fisheries and Oceans where federal fisheries responsibilities are involved. 54 refs., 5 tabs., 3 figs

  6. Water Reclamation and Reuse.

    Science.gov (United States)

    Smith, Daniel W.

    1978-01-01

    Presents a literature review of water reclamation and reuse. This review covers: (1) water resources planning; (2) agriculture and irrigation; (3) ground recharge; (4) industrial reuse; (5) health considerations; and (6) technology developments. A list of 217 references is also presented. (HM)

  7. Effective anisotropy through traveltime and amplitude matching

    KAUST Repository

    Wang, Hui

    2014-08-05

    Introducing anisotropy to seismic wave propagation reveals more realistic physics of our Earth\\'s subsurface as compared to the isotropic assumption. However wavefield modeling, the engine of seismic inverse problems, in anisotropic media still suffers from computational burdens, in particular with complex anisotropy such as transversely isotropic (TI) and Orthorhombic anisotropy. We develop effective isotropic velocity and density models to package the effects of anisotropy such that the wave propagation behavior using these effective models approximate those of the original anisotropic model. We build these effective models through the high frequency asymptotic approximation based on the eikonal and transport equations. We match the geometrical behavior of the wave-fields, given by traveltimes, from the anisotropic and isotropic eikonal equations. This matching yields the effective isotropic velocity that approximates the kinematics of the anisotropic wavefield. Equivalently, we calculate the effective densities by equating the anisotropic and isotropic transport equations. The effective velocities and densities are then fed into the isotropic acoustic variable density wave equation to obtain cheaper anisotropic wavefields. We justify our approach by testing it on an elliptical anisotropic model. The numerical results demonstrate a good matching of both traveltime and amplitude between anisotropic and effective isotropic wavefields.

  8. Greening reclamation of arid region

    Energy Technology Data Exchange (ETDEWEB)

    Kamichika, Makio [Tottori Univ. (Japan)

    1989-01-20

    Arid regions occupy a third of the whole land in the world, and desertification in the rimland makes a problem become more acute. It is also a problem that the large part of such areas is distributed in developing countries. Desertification is defined as a phenomenon, by which the ecological system is degenerated by the change of weather conditions and the pressure of human beings and livestock, and productivity of land is markedly deteriorated. In order to prevent desertification and to promote greening reclamation and agricultural development, it is necessary to analyze desertification mechanism in detail. Artificial factors are overpopulation, too much pasturage, and conversion of grassland into farmland. Natural environmental factors are weather conditions, water resources, soil conditions, etc. It is also important for greening reclamation and development of farm land to evaluate the amount of meteorological resources (such as water resources, energy resources, etc.) and to search for the possibility of their utilization. Because of major condition to grow plants is water environment, investigation and development of water resources are important. If a project ignores the cycle of the ecological system, it might be in danger of retrogradation toward desertification. 8 refs., 10 figs., 4 tabs.

  9. Full traveltime inversion in source domain

    KAUST Repository

    Liu, Lu

    2017-06-01

    This paper presents a new method of source-domain full traveltime inversion (FTI). The objective of this study is automatically building near-surface velocity using the early arrivals of seismic data. This method can generate the inverted velocity that can kinetically best match the reconstructed plane-wave source of early arrivals with true source in source domain. It does not require picking first arrivals for tomography, which is one of the most challenging aspects of ray-based tomographic inversion. Besides, this method does not need estimate the source wavelet, which is a necessity for receiver-domain wave-equation velocity inversion. Furthermore, we applied our method on one synthetic dataset; the results show our method could generate a reasonable background velocity even when shingling first arrivals exist and could provide a good initial velocity for the conventional full waveform inversion (FWI).

  10. Bayesian inversion of refraction seismic traveltime data

    Science.gov (United States)

    Ryberg, T.; Haberland, Ch

    2018-03-01

    We apply a Bayesian Markov chain Monte Carlo (McMC) formalism to the inversion of refraction seismic, traveltime data sets to derive 2-D velocity models below linear arrays (i.e. profiles) of sources and seismic receivers. Typical refraction data sets, especially when using the far-offset observations, are known as having experimental geometries which are very poor, highly ill-posed and far from being ideal. As a consequence, the structural resolution quickly degrades with depth. Conventional inversion techniques, based on regularization, potentially suffer from the choice of appropriate inversion parameters (i.e. number and distribution of cells, starting velocity models, damping and smoothing constraints, data noise level, etc.) and only local model space exploration. McMC techniques are used for exhaustive sampling of the model space without the need of prior knowledge (or assumptions) of inversion parameters, resulting in a large number of models fitting the observations. Statistical analysis of these models allows to derive an average (reference) solution and its standard deviation, thus providing uncertainty estimates of the inversion result. The highly non-linear character of the inversion problem, mainly caused by the experiment geometry, does not allow to derive a reference solution and error map by a simply averaging procedure. We present a modified averaging technique, which excludes parts of the prior distribution in the posterior values due to poor ray coverage, thus providing reliable estimates of inversion model properties even in those parts of the models. The model is discretized by a set of Voronoi polygons (with constant slowness cells) or a triangulated mesh (with interpolation within the triangles). Forward traveltime calculations are performed by a fast, finite-difference-based eikonal solver. The method is applied to a data set from a refraction seismic survey from Northern Namibia and compared to conventional tomography. An inversion test

  11. Boric Acid Reclamation System (BARS)

    International Nuclear Information System (INIS)

    Kniazewycz, B.G.; Markind, J.

    1986-01-01

    KLM Technologies was recently awarded a contract by the Department of Energy for a Phase II demonstration of an optimized full-scale prototype membrane system including performance evaluation under plant operating conditions. The program will serve as the catalyst for developing technology to augment the industry's incentive toward innovative and compact volume reduction alternatives for PWRs. The development and demonstration of the KLM Boric Acid Reclamation System, which is readily retrofitted into existing PWR facilities, will provide a positive means of reducing PWR waste volumes without requiring the $25-50 million equipment and support facility expenditures associated with most liquid waste volume reduction systems. This new application for membrane separation technology can reduce waste by upward of 50 percent for two-thirds of the operating nuclear plants in the U.S. The use of membrane technology has demonstrated significant process potential in radwaste and related applications. Reverse Osmosis (RO) and Ultrafiltration (UF) can provide selective filtration capability and concentrate contaminants without the need of filter aids, thus minimizing the requirements of chemical regeneration, costly resins, and major process equipment with large auxiliary heat supplies. KLM Technologies' personnel have identified a Boric Acid Reclamation System (BARS) utilizing RO and UF to produce a recyclable grade of otherwise waste boric acid at PWRs, thus reducing a major source of low-level radwaste. The design of a prototype BARS as a compact volume reduction system was the result of KLM's Phase I Program, and based upon a preliminary feasibility program, which assessed the applicability of membrane technology to refurbish and recycle waste boric acid from floor and equipment drain streams. The analysis of the overall program indicated a substantial savings regarding off-site disposal costs

  12. Prospects for ash pond reclamation

    Energy Technology Data Exchange (ETDEWEB)

    Shyyam, A.K.; Shukla, K.S.; Agrawal, D. (National Thermal Power Corporation Ltd., New Delhi (India))

    1993-01-01

    A typical modern coal fired station in India burns 0.7 t/MWh of coal and consequently generates ash at 0.245 t/MWh. The physical nature of ash, low available concentrations of certain plant nutrients and the presence of phytotoxic trace elements render fly ash marginally adequate for plant growth. As fly ash itself was thought to be an inappropriate growth medium for plants, regulators decided that a soil cover is mandatory. There is ample data to suggest that the attributes of fly ash detrimental to plant growth can be ameliorated, allowing the establishment of vegetation directly on fly ash surfaces. The natural revegetation of fly ash disposal sites has been reported in the world. The natural vegetation pioneered by Cynodon at different stages of ecological succession and comprising of species such as [ital Calotropis gigantea], [ital Lippia nodiflora], [ital Ipomea, cornea], [ital Xanthium parviflorum] has been noted at one of the NTPC projects, in Badarpur Thermal Power Station. Since natural reclamation is a time-consuming process, experimental trials of growing some species over the temporary ash lagoon directly (without soil cover) were carried out at Ramagundam Super Thermal Power Project (RSTPP) of NTPC, in South India to achieve faster results than the natural process. 6 refs., 8 figs.

  13. Automatic traveltime picking using local time-frequency maps

    KAUST Repository

    Saragiotis, Christos

    2011-01-01

    The arrival times of distinct and sufficiently concentrated signals can be computed using Fourier transforms. In real seis- mograms, however, signals are far from distinct. We use local time-frequency maps of the seismograms and its frequency derivatives to obtain frequency-dependent (instantaneous) traveltimes. A smooth division is utilized to control the resolution of the instantaneous traveltimes to allow for a trade-off between resolution and stability. We average these traveltimes over the frequency band which is data-dependent. The resulting traveltime attribute is used to isolate different signals in seismic traces. We demonstrate the effectiveness of this automatic method for picking arrivals by applying it on synthetic and real data. © 2011 Society of Exploration Geophysicists.

  14. Anisotropic wave-equation traveltime and waveform inversion

    KAUST Repository

    Feng, Shihang; Schuster, Gerard T.

    2016-01-01

    The wave-equation traveltime and waveform inversion (WTW) methodology is developed to invert for anisotropic parameters in a vertical transverse isotropic (VTI) meidum. The simultaneous inversion of anisotropic parameters v0, ε and δ is initially

  15. Anisotropic wave-equation traveltime and waveform inversion

    KAUST Repository

    Feng, Shihang

    2016-09-06

    The wave-equation traveltime and waveform inversion (WTW) methodology is developed to invert for anisotropic parameters in a vertical transverse isotropic (VTI) meidum. The simultaneous inversion of anisotropic parameters v0, ε and δ is initially performed using the wave-equation traveltime inversion (WT) method. The WT tomograms are then used as starting background models for VTI full waveform inversion. Preliminary numerical tests on synthetic data demonstrate the feasibility of this method for multi-parameter inversion.

  16. Conditioning bounds for traveltime tomography in layered media

    OpenAIRE

    Baek, Hyoungsu; Demanet, Laurent

    2011-01-01

    This paper revisits the problem of recovering a smooth, isotropic, layered wave speed profile from surface traveltime information. While it is classic knowledge that the diving (refracted) rays classically determine the wave speed in a weakly well-posed fashion via the Abel transform, we show in this paper that traveltimes of reflected rays do not contain enough information to recover the medium in a well-posed manner, regardless of the discretization. The counterpart of the Abel transform in...

  17. Henretta Creek reclamation project

    International Nuclear Information System (INIS)

    Pumphrey, J.F.

    2009-01-01

    Teck Coal Ltd. operates 6 open-pit coal mines, of which 5 are located in the Elk Valley in southeastern British Columbia. The Fording River Operations (FRO) began in 1971 in mining areas in Eagle Mountain, Turnbull Mountain and Henretta Valley. The recovery of approximately 5 million tons of coal from the Henretta Creek Valley posed significant challenges to mine planners, hydrologists and environmental experts because the coal had to be recovered from the valley flanks and also from under the main valley floor, on which the fish-bearing Henretta Creek runs. The Henretta Dragline Mining project was described along with the water control structures and fisheries management efforts for the cutthroat trout. A detailed Environmental Impact Assessment and Stage 1 mining report for the Henretta Valley area was completed in December 1990. FRO was granted a mining and reclamation permit in 1991. A temporary relocation of 1,270 metres was required in in April 1997 in order to enable mining on both sides and below the creek bed. Among the innovative construction techniques was a diversion of Henretta Creek through large diameter steel culverts and a specialized crossing of the creek to allow fish passage. The first water flowed through the reclaimed Henretta Creek channel in late 1998 and the first high flow occurred in the spring of 2000. Teck coal FRO then launched an annual fish and fish habitat monitoring program which focused on the Henretta Creek Reclaimed Channel and Henretta Lake. This document presented the results from the final year, 2006, and a summary of the 7 year aquatic monitoring program. It was concluded that from mining through to reclamation, the Henretta project shows the commitment and success of mining and reclamation practices at Teck Coal. Indicators of the project's success include riparian zone vegetation, fisheries re-establishment, aquatic communities and habitat utilization by terrestrial and avian species. 33 refs., 1 fig.

  18. Land reclamation in Egypt

    DEFF Research Database (Denmark)

    Adriansen, Hanne Kirstine

    2009-01-01

    on fieldwork in a village in the new lands; it is inhabited by graduates who have received land under the Mubarak Project. The analysis shows that they move there in hope of making a better life especially for their children. Nevertheless, the settlers have difficulties building a sense of belonging to the new....... This paper examines from a micro-perspective, the life of Egyptians resettled in the new lands. The first part of the paper provides an introduction to the discourses of land reclamation, to the policies of reclaimed land distribution, and to the background of the settlers. The second part is based...

  19. The offset-midpoint traveltime pyramid of P-waves in homogeneous orthorhombic media

    KAUST Repository

    Hao, Qi; Stovas, Alexey; Alkhalifah, Tariq Ali

    2016-01-01

    The offset-midpoint traveltime pyramid describes the diffraction traveltime of a point diffractor in homogeneous media. We have developed an analytic approximation for the P-wave offset-midpoint traveltime pyramid for homogeneous orthorhombic media. In this approximation, a perturbation method and the Shanks transform were implemented to derive the analytic expressions for the horizontal slowness components of P-waves in orthorhombic media. Numerical examples were shown to analyze the proposed traveltime pyramid formula and determined its accuracy and the application in calculating migration isochrones and reflection traveltime. The proposed offset-midpoint traveltime formula is useful for Kirchhoff prestack time migration and migration velocity analysis for orthorhombic media.

  20. The offset-midpoint traveltime pyramid of P-waves in homogeneous orthorhombic media

    KAUST Repository

    Hao, Qi

    2016-07-18

    The offset-midpoint traveltime pyramid describes the diffraction traveltime of a point diffractor in homogeneous media. We have developed an analytic approximation for the P-wave offset-midpoint traveltime pyramid for homogeneous orthorhombic media. In this approximation, a perturbation method and the Shanks transform were implemented to derive the analytic expressions for the horizontal slowness components of P-waves in orthorhombic media. Numerical examples were shown to analyze the proposed traveltime pyramid formula and determined its accuracy and the application in calculating migration isochrones and reflection traveltime. The proposed offset-midpoint traveltime formula is useful for Kirchhoff prestack time migration and migration velocity analysis for orthorhombic media.

  1. Spray Lakes reclamation project

    International Nuclear Information System (INIS)

    Zacaruk, M.R.

    1996-01-01

    When the level of the Spray Lakes (Alberta) reservoir was lowered by four metres, 208 ha of shoreline was exposed offering little to no wildlife benefit and only limited recreation potential. A reclamation plan for 128 ha of shoreline was therefore developed. A wild life-palatable, self-sustaining vegetation cover was established. Approximately 90 ha was scarified, and/or had tree stumps removed prior to seeding, while approximately 40 ha was seeded and fertilized only. The remaining 80 ha of shoreline was not revegetated due to limited access; these areas will be allowed to re-establish naturally from the forested edge. The species were selected based on their adaptation to alkaline soils, drought tolerance, persistence in a stand and rooting characteristics, as well as palatability to wildlife. Alfalfa, white clover and fall rye were seeded. In general, all areas of the reclamation plan are successfully revegetated. Areas which were recontoured are stable and non-eroding. Success was most significant in areas which had been scarified, then seeded and trackpacked. Areas that were seeded and fertilized only were less well established at the end of the first year, but showed improvement in the second and third years. The area will be monitored to ensure the reclaimed vegetation is self-sustaining

  2. Finite frequency effects on global S diffracted traveltimes

    Science.gov (United States)

    To, Akiko; Romanowicz, Barbara

    2009-12-01

    Many seismic observations have shown that strong heterogeneities exist in the bottom few hundreds kilometres of the mantle. Among different seismic phases, this region, that is, the D'' layer, can be most globally sampled by diffracted waves along the core mantle boundary. Here, we assess the amplitude and distribution of S-wave velocity variations in the D'' layer of an existing tomographic model. We compare observed SHdiff traveltime anomalies to synthetic ones obtained using (1) the coupled spectral element method (CSEM), which is our reference exact method, (2) non-linear asymptotic coupling theory (NACT) and (3) 1-D ray theory. Synthetic waveforms are calculated down to 0.057 Hz with a corner frequency at 0.026 Hz. In the first part of this paper, we compare the traveltime anomaly predictions from the three different methods. The anomalies from CSEM and NACT are obtained by taking cross-correlations of the 3-D and 1-D synthetic waveforms. Both NACT and standard ray theory, which are used in other recent tomographic models, suffer from biases in traveltime predictions for vertically varying structure near the core-mantle boundary: NACT suffers from saturation of traveltimes, due to the portion in the kernel calculation that is based on the reference 1-D model, while ray theory suffers from wave front healing effects in the vertical plane, exacerbated in the presence of thin low velocity layers. In the second part, we compare observed traveltime anomalies and predictions from CSEM. The data consists of 506 Sdiff traveltime anomalies from 15 events, obtained form global seismograph network records. The tomographic model does a good job at predicting traveltimes of Sdiff phases especially when the path mostly samples fast S velocity regions at the base of the mantle, such as beneath India, China, North America and Northern Pacific. The underprediction of the positive observed traveltime anomalies seems to occur in regions where the paths sample close to the border

  3. Coal mine site reclamation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-02-15

    Coal mine sites can have significant effects on local environments. In addition to the physical disruption of land forms and ecosystems, mining can also leave behind a legacy of secondary detrimental effects due to leaching of acid and trace elements from discarded materials. This report looks at the remediation of both deep mine and opencast mine sites, covering reclamation methods, back-filling issues, drainage and restoration. Examples of national variations in the applicable legislation and in the definition of rehabilitation are compared. Ultimately, mine site rehabilitation should return sites to conditions where land forms, soils, hydrology, and flora and fauna are self-sustaining and compatible with surrounding land uses. Case studies are given to show what can be achieved and how some landscapes can actually be improved as a result of mining activity.

  4. It is only a banana-Traveltime sensitivity kernels using the unwrapped phase

    KAUST Repository

    Djebbi, Ramzi; Alkhalifah, Tariq Ali

    2012-01-01

    Traveltime sensitivity kernels for finite-frequency traveltimes computed using the Born or Rytov approximations admits hallow banana shaped responses in the plane of propagation and a circular doughnut shaped responses in the cross section. This suggests that finite-frequency traveltimes are insensitive to velocity information along the infinite-frequency ray path, which is obviously inaccurate and creates a disconnect in the traveltime dependency on frequency. Using the instantaneous traveltime of the wavefield, which is capable of unwrapping the phase function, we obtain traveltime sensitivity kernels that have plain banana shape responses, with the thickness of the banana governed by the investigated frequency. This result confirms that the hallow banana shape is simply a result of the wrapping of the phase of the wavefield, in which Born nor Rytov approximations can properly deal with. The instantaneous traveltime can, thus, mitigate the nonlinearity problem encountered in finite-frequency traveltime inversions that may arise from these hallow banana sensitivity kernels.

  5. Refraction traveltime tomography with irregular topography using the unwrapped phase inversion

    KAUST Repository

    Choi, Yun Seok; Alkhalifah, Tariq Ali

    2013-01-01

    inversion zones and ray shadow regions. We develop a tomographic approach based on traveltime solutions obtained by tracking the phase (instantaneous traveltime) of the wavefield solution of the Helmholtz wave equation. Since the instantaneous

  6. Visco-acoustic wave-equation traveltime inversion and its sensitivity to attenuation errors

    KAUST Repository

    Yu, Han; Chen, Yuqing; Hanafy, Sherif M.; Huang, Jiangping

    2018-01-01

    A visco-acoustic wave-equation traveltime inversion method is presented that inverts for the shallow subsurface velocity distribution. Similar to the classical wave equation traveltime inversion, this method finds the velocity model that minimizes

  7. Elastic Wave-equation Reflection Traveltime Inversion Using Dynamic Warping and Wave Mode Decomposition

    KAUST Repository

    Wang, T.; Cheng, J.B.; Guo, Qiang; Wang, C.L.

    2017-01-01

    Elastic full waveform inversion (EFWI) provides high-resolution parameter estimation of the subsurface but requires good initial guess of the true model. The traveltime inversion only minimizes traveltime misfits which are more sensitive

  8. Angle-domain Migration Velocity Analysis using Wave-equation Reflection Traveltime Inversion

    KAUST Repository

    Zhang, Sanzong; Schuster, Gerard T.; Luo, Yi

    2012-01-01

    way as wave-equation transmission traveltime inversion. The residual movemout analysis in the angle-domain common image gathers provides a robust estimate of the depth residual which is converted to the reflection traveltime residual for the velocity

  9. Reclamation of urban areas

    International Nuclear Information System (INIS)

    Roed, J.

    1986-02-01

    A literature study was conducted in order to compare the effectiveness and cost of different reclamation procedures that may be employed after an accident on a nuclear facility takes place in which radioactive material is released to the atmosphere. A substantial amount of work has been done on reclaming soil and snow-covered surfaces. Using scrapers or other soil-moving equipment decontamination factors are 10-100. (The decontamination factor is the ratio of the contamination before to that after the decontamination procedure). However, information on decontamination of paved areas by simple methods such as firehosing and vacuum sweeping are poorly documented. Therefore, only a very uncertain figure in the range 2-10 can be given for the decontamination factor here. It is recommended that a major effort be made in the future to investigate the efficiency of these simple methods, because of their relatively low cost. Also, more expensive methods for reducing the dose such as vacuuming, road planing and deep plowing are treated because of their feasibility under certain circumstances. Using these methods dose reduction factors in the 2-100 range can be obtained. Very expensive techniques, such as sandblasting, water cannon, flame spalling, etc. are justifiable usable only in special situations and are therefore considered very briefly here. The methods vary widely in cost. A simple method like vacuum sweeping costs $0.004 per square meter of surface; whereas one like road planing can reach $4 per square meter. A more sophisticated technique like flame spalling costs as much as $100 per square meter. (author)

  10. Coal mine reclamation: the cooperative approach

    Energy Technology Data Exchange (ETDEWEB)

    Blazenko, E J; Kuhn, J A

    1976-07-01

    Salient problems encountered in coal mine reclamation include land use and environmental protection values, license applications and subsequent reports, and the development of sound reclamation planning programs. The facts of life to be dealt with in reclamation and reclamation planning include encounters with negative attitudes toward reclamation, basic physics, chemistry, biology and geology, and the ability or inability to respond properly. The cooperative approach to reclamation includes interfacing with mining company personnel, government agencies, public-interest groups and consultants. Some promising solutions to reclamation, especially in alpine and subalpine regions, include handling of materials and organic test plot research.

  11. Boric Acid Reclamation System (BARS)

    International Nuclear Information System (INIS)

    Kniazewycz, B.G.; Markind, J.

    1986-03-01

    KLM Technologies' personnel have identified a Boric Acid Reclamation System (BARS) utilizing reverse osmosis and ultrafiltration to produce a recyclable grade of otherwise waste boric acid at PWRs, thus reducing a major source of low-level radwaste. The design of a prototype BARS as a compact volume reduction system was the result of KLM's Phase 1 Program, and based upon a preliminary feasibility program, which assessed the applicability of membrane technology to refurbish and recycle waste boric acid from floor and equipment drain streams. The analysis of the overall program indicated a substantial savings regarding off-site disposal costs. Today's economic scenario indicates that optimization of volume reduction operation procedures could significantly reduce waste management costs, especially where burial penalties have become more severe. As a reaction to the economic burden imposed by final disposal, many nuclear plants are currently modifying their design and operating philosophies concerning liquid radwaste processing systems to meet stricter environmental regulations, and to derive potential economic benefits by reducing the ever-increasing volumes of wastes that are produced. To effect these changes, innovative practices in waste management and more efficient processing technologies are being successfully implemented

  12. The Karvina Township reclamation concept

    International Nuclear Information System (INIS)

    Nemec, J.; Orsag, H.; Dirner, V.

    1997-01-01

    The paper contains a summary of all reclamation activities in the Karvina township territory, Czech Republic, including those completed, those being worked at, and those under preparation. All projects are connected with changes of the landscape due to coal extraction. The landscape reclamation requires a certain volume of mine waste and of soil. The policy, as presented in this paper, has been submitted for approval by the Municipal Council

  13. Investigations of physicochemical properties of dusts generated in mechanical reclamation process of spent moulding sands with alkaline resins

    Directory of Open Access Journals (Sweden)

    R. Dańko

    2014-03-01

    Full Text Available Mechanical reclamation processes of spent moulding sands generate large amounts of post-reclamation dusts mainly containing rubbed spent binding agents and quartz dusts. The amount of post-reclamation dusts, depending in the reclamation system efficiency and the reclaim dedusting system, can reach 5%-10% in relation to the total reclaimed spent moulding sand. The proper utilization of such material is a big problem facing foundries these days. This study presents the results of investigations of physicochemical properties of post- reclamation dusts. All tested dusts originated from various Polish cast steel plants applying the mechanical reclamation process of moulding sands with alkaline resins, obtained from different producers. Different dusts, delivered from foundries, were tested to determine their chemical composition, granular characterization, physicochemical and energetic properties. Presented results confirmed assumptions that it is possible to utilize dusts generated during mechanical reclamation of used sands with organic resins as a source of energy.

  14. Efficient traveltime compression for 3D prestack Kirchhoff migration

    KAUST Repository

    Alkhalifah, Tariq

    2010-01-01

    Kirchhoff 3D prestack migration, as part of its execution, usually requires repeated access to a large traveltime table data base. Access to this data base implies either a memory intensive or I/O bounded solution to the storage problem. Proper

  15. Seismic travel-time tomography for detailed global mantle structure

    NARCIS (Netherlands)

    Bijwaard, H.

    1999-01-01

    The object of this thesis is to use travel-time tomography to focus and enhance the existing global image of the Earth's mantle and crust. This image is still rather blurred with respect to the considerably sharper pictures commonly obtained in regional studies. The improvement is basically

  16. Seismic travel-time tomography for detailed global mantle structure

    NARCIS (Netherlands)

    Bijwaard, H.

    1999-01-01

    The object of this thesis is to use travel-time tomography to focus and enhance the existing global image of the Earth's mantle and crust. This image is still rather blurred with respect to the considerably sharper pictures commonly obtained in regional studies. The improvement is basically obtained

  17. Near-surface traveltime tomographic inversion using multiple first break picks

    KAUST Repository

    Saragiotis, Christos; Choi, Yun Seok; Keho, T.; Alkhalifah, Tariq Ali

    2013-01-01

    The input data for refraction traveltime tomography are the traveltimes of the first breaks, which are picked using automatic pickers. Although automatic pickers perform satisfactorily overall, no one automatic picker can be characterized as the best one; one picker might fail for traces for which other pickers are accurate and vice versa for other traces. We introduce an iterative method for traveltime tomography, which takes as input traveltimes from a number of pickers. During the inversion scheme inconsistent traveltimes are replaced with more meaningful ones to obtain a smooth near-surface velocity model. The scheme is easily parallelizable and a byproduct of the inversion scheme is a set of consistent traveltimes which is close to the actual traveltimes of the first breaks.

  18. Traveltime approximations and parameter estimation for orthorhombic media

    KAUST Repository

    Masmoudi, Nabil

    2016-05-30

    Building anisotropy models is necessary for seismic modeling and imaging. However, anisotropy estimation is challenging due to the trade-off between inhomogeneity and anisotropy. Luckily, we can estimate the anisotropy parameters Building anisotropy models is necessary for seismic modeling and imaging. However, anisotropy estimation is challenging due to the trade-off between inhomogeneity and anisotropy. Luckily, we can estimate the anisotropy parameters if we relate them analytically to traveltimes. Using perturbation theory, we have developed traveltime approximations for orthorhombic media as explicit functions of the anellipticity parameters η1, η2, and Δχ in inhomogeneous background media. The parameter Δχ is related to Tsvankin-Thomsen notation and ensures easier computation of traveltimes in the background model. Specifically, our expansion assumes an inhomogeneous ellipsoidal anisotropic background model, which can be obtained from well information and stacking velocity analysis. We have used the Shanks transform to enhance the accuracy of the formulas. A homogeneous medium simplification of the traveltime expansion provided a nonhyperbolic moveout description of the traveltime that was more accurate than other derived approximations. Moreover, the formulation provides a computationally efficient tool to solve the eikonal equation of an orthorhombic medium, without any constraints on the background model complexity. Although, the expansion is based on the factorized representation of the perturbation parameters, smooth variations of these parameters (represented as effective values) provides reasonable results. Thus, this formulation provides a mechanism to estimate the three effective parameters η1, η2, and Δχ. We have derived Dix-type formulas for orthorhombic medium to convert the effective parameters to their interval values.

  19. BUILDING MATERIALS RECLAMATION PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    David C. Weggel; Shen-En Chen; Helene Hilger; Fabien Besnard; Tara Cavalline; Brett Tempest; Adam Alvey; Madeleine Grimmer; Rebecca Turner

    2010-08-31

    This report describes work conducted on the Building Materials Reclamation Program for the period of September 2008 to August 2010. The goals of the project included selecting materials from the local construction and demolition (C&D) waste stream and developing economically viable reprocessing, reuse or recycling schemes to divert them from landfill storage. Educational resources as well as conceptual designs and engineering feasibility demonstrations were provided for various aspects of the work. The project was divided into two distinct phases: Research and Engineering Feasibility and Dissemination. In the Research Phase, a literature review was initiated and data collection commenced, an advisory panel was organized, and research was conducted to evaluate high volume C&D materials for nontraditional use; five materials were selected for more detailed investigations. In the Engineering Feasibility and Dissemination Phase, a conceptual study for a regional (Mecklenburg and surrounding counties) collection and sorting facility was performed, an engineering feasibility project to demonstrate the viability of recycling or reuse schemes was created, the literature review was extended and completed, and pedagogical materials were developed. Over the two-year duration of the project, all of the tasks and subtasks outlined in the original project proposal have been completed. The Final Progress Report, which briefly describes actual project accomplishments versus the tasks/subtasks of the original project proposal, is included in Appendix A of this report. This report describes the scientific/technical aspects (hypotheses, research/testing, and findings) of six subprojects that investigated five common C&D materials. Table 1 summarizes the six subprojects, including the C&D material studied and the graduate student and the faculty advisor on each subproject.

  20. Building Materials Reclamation Program

    International Nuclear Information System (INIS)

    Weggel, David C.; Chen, Shen-En; Hilger, Helene; Besnard, Fabien; Cavalline, Tara; Tempest, Brett; Alvey, Adam; Grimmer, Madeleine; Turner, Rebecca

    2011-01-01

    This report describes work conducted on the Building Materials Reclamation Program for the period of September 2008 to August 2010. The goals of the project included selecting materials from the local construction and demolition (C and D) waste stream and developing economically viable reprocessing, reuse or recycling schemes to divert them from landfill storage. Educational resources as well as conceptual designs and engineering feasibility demonstrations were provided for various aspects of the work. The project was divided into two distinct phases: Research and Engineering Feasibility and Dissemination. In the Research Phase, a literature review was initiated and data collection commenced, an advisory panel was organized, and research was conducted to evaluate high volume C and D materials for nontraditional use; five materials were selected for more detailed investigations. In the Engineering Feasibility and Dissemination Phase, a conceptual study for a regional (Mecklenburg and surrounding counties) collection and sorting facility was performed, an engineering feasibility project to demonstrate the viability of recycling or reuse schemes was created, the literature review was extended and completed, and pedagogical materials were developed. Over the two-year duration of the project, all of the tasks and subtasks outlined in the original project proposal have been completed. The Final Progress Report, which briefly describes actual project accomplishments versus the tasks/subtasks of the original project proposal, is included in Appendix A of this report. This report describes the scientific/technical aspects (hypotheses, research/testing, and findings) of six subprojects that investigated five common C and D materials. Table 1 summarizes the six subprojects, including the C and D material studied and the graduate student and the faculty advisor on each subproject.

  1. Mechanization for Optimal Landscape Reclamation

    Science.gov (United States)

    Vondráčková, Terezie; Voštová, Věra; Kraus, Michal

    2017-12-01

    Reclamation is a method of ultimate utilization of land adversely affected by mining or other industrial activity. The paper explains the types of reclamation and the term “optimal reclamation”. Technological options of the long-lasting process of mine dumps reclamation starting with the removal of overlying rocks, transport and backfilling up to the follow-up remodelling of the mine dumps terrain. Technological units and equipment for stripping flow division. Stripping flow solution with respect to optimal reclamation. We recommend that the application of logistic chains and mining simulation with follow-up reclamation to open-pit mines be used for the implementation of optimal reclamation. In addition to a database of local heterogeneities of the stripped soil and reclaimed land, the flow of earths should be resolved in a manner allowing the most suitable soil substrate to be created for the restoration of agricultural and forest land on mine dumps. The methodology under development for the solution of a number of problems, including the geological survey of overlying rocks, extraction of stripping, their transport and backfilling in specified locations with the follow-up deployment of goal-directed reclamation. It will make possible to reduce the financial resources needed for the complex process chain by utilizing GIS, GPS and DGPS technologies, logistic tools and synergistic effects. When selecting machines for transport, moving and spreading of earths, various points of view and aspects must be taken into account. Among such aspects are e.g. the kind of earth to be operated by the respective construction machine, the kind of work activities to be performed, the machine’s capacity, the option to control the machine’s implement and economic aspects and clients’ requirements. All these points of view must be considered in the decision-making process so that the selected machine is capable of executing the required activity and that the use of an

  2. Ray-tracing traveltime tomography versus wave-equation traveltime inversion for near-surface seismic land data

    KAUST Repository

    Fu, Lei

    2017-05-11

    Full-waveform inversion of land seismic data tends to get stuck in a local minimum associated with the waveform misfit function. This problem can be partly mitigated by using an initial velocity model that is close to the true velocity model. This initial starting model can be obtained by inverting traveltimes with ray-tracing traveltime tomography (RT) or wave-equation traveltime (WT) inversion. We have found that WT can provide a more accurate tomogram than RT by inverting the first-arrival traveltimes, and empirical tests suggest that RT is more sensitive to the additive noise in the input data than WT. We present two examples of applying WT and RT to land seismic data acquired in western Saudi Arabia. One of the seismic experiments investigated the water-table depth, and the other one attempted to detect the location of a buried fault. The seismic land data were inverted by WT and RT to generate the P-velocity tomograms, from which we can clearly identify the water table depth along the seismic survey line in the first example and the fault location in the second example.

  3. Investigations of Physicochemical Properties and Thermal Utilisation of Dusts Generated in the Mechanical Reclamation Process of Spent Moulding Sands

    Directory of Open Access Journals (Sweden)

    Dańko R.

    2015-04-01

    Full Text Available The after reclamation dusts originated from various foundry plants, applying moulding sands with organic binding agents, mostly resins, are characterised by different properties in dependence of the used binders, reclamation systems, spent sands overheating degree and the efficiency of the system dedusting the reclaimed material operating in individual foundry plants.

  4. Reclamation to native forest ecosystems in the oil sands region

    International Nuclear Information System (INIS)

    Tuttle, S.

    1996-01-01

    Suncor's reclamation goal is to achieve maintenance-free, self-sustaining ecosystems with capability equivalent to their pre-disturbed condition. Ecosystem re-establishment includes the following steps: (1) soil reconstruction, (2) revegetation, and (3) growth of primary vegetation communities. To assess the sustainability of re-established ecosystems, vegetation and soil characteristics are monitored each year. This method of reclamation and tree planting results in a diverse herbaceous cover developing within a year of soil amendment application, providing erosion protection along with a source of cover and food for wildlife. Results to date have proven to be very positive, since reconstructed soils have been shown to be equivalent to or better than original soils. Also, reclamation sites are developing into sustainable ecological units comparable to nearby natural forest areas

  5. Reclamation of opencut spoil piles

    Energy Technology Data Exchange (ETDEWEB)

    1976-07-01

    A successful reclamation program requires definite physical/engineering guidelines, a specific time commitment and to be fully integrated in the mining operation enabling most efficient use of available resources. This statement should be immediately qualified by saying that there must be enough flexibility to allow for varying mine layouts, plans and conditions. Mine conditions include physical and chemical spoil properties, climatic conditions and local topographic effects. Whilst reclamation is the responsibility of individual mine managers, the author undertakes a co-ordinating function amongst mine environmental officers to ensure that experience gained is recorded. Exchange of information between mines is maintained and there is a minimum duplication of effort.

  6. Mining and Reclamation Technology Symposium

    Energy Technology Data Exchange (ETDEWEB)

    None Available

    1999-06-24

    The Mining and Reclamation Technology Symposium was commissioned by the Mountaintop Removal Mining/Valley Fill Environmental Impact Statement (EIS) Interagency Steering Committee as an educational forum for the members of the regulatory community who will participate in the development of the EIS. The Steering Committee sought a balanced audience to ensure the input to the regulatory community reflected the range of perspectives on this complicated and emotional issue. The focus of this symposium is on mining and reclamation technology alternatives, which is one of eleven topics scheduled for review to support development of the EIS. Others include hydrologic, environmental, ecological, and socio-economic issues.

  7. Achieving land use potential through reclamation

    International Nuclear Information System (INIS)

    1992-01-01

    Papers are presented under the headings: policy, rules and regulations; surface mine spoil and soil; wetlands technical division; forestry and wildlife technical division; abatement and treatment of acidic conditions; wetlands technical division; ecological evaluations of reclamation success; international tailing reclamation technical division; disposal and utilization of coal combustion residues; landscape architecture technical division; impacts and biological treatment of acidic drainage; reclamation with trees and woods shrubs; reclamation and restoration practices; and ultimate land use

  8. 7 CFR 632.21 - Reclamation plan.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Reclamation plan. 632.21 Section 632.21 Agriculture... AGRICULTURE LONG TERM CONTRACTING RURAL ABANDONED MINE PROGRAM Participation § 632.21 Reclamation plan. (a) Responsibility. Land users are responsible for developing a reclamation plan that will serve as a basis for a...

  9. 31 CFR 235.5 - Reclamation amounts.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Reclamation amounts. 235.5 Section 235.5 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE... ON DESIGNATED DEPOSITARIES § 235.5 Reclamation amounts. Amounts received by way of reclamation on...

  10. Automatic first-break picking using the instantaneous traveltime attribute

    KAUST Repository

    Saragiotis, Christos

    2012-01-01

    Picking the first breaks is an important step in seismic processing. The large volume of the seismic data calls for automatic and objective picking. We introduce a new automatic first-break picker, which uses specifically designed time windows and an iterative procedure based on the instantaneous traveltime attribute. The method is fast as it only uses a few FFT\\'s per trace. We demonstrate the effectiveness of this automatic method by applying it on real test data.

  11. The azimuth-dependent offset-midpoint traveltime pyramid in 3D HTI media

    KAUST Repository

    Hao, Qi

    2013-09-22

    Analytical representation of offset-midpoint traveltime equation is very important for pre-stack Kirchhoff migration and velocity inversion in anisotropic media. For VTI media, the offset-midpoint traveltime resembles the shape of Cheop\\'s pyramid. In this study, we extend the offset-midpoint traveltime pyramid to the case of 3D HTI media. We employ the stationary phase method to derive the analytical representation of traveltime equation, and then use Shanks transformation to improve the accuracy of horizontal and vertical slownesses. The traveltime pyramid is derived in both the depth- and time-domain. Numerical examples indicate that the azimuthal characteristics of both the traveltime pyramid and the migration isochrones are very obvious in HTI media due to the effect of anisotropy.

  12. Water reclamation and reuse

    International Nuclear Information System (INIS)

    Hrudey, S.E.

    1982-01-01

    A literature review of wastewater treatment for recycle is presented. Wastewater and activated sludge from the processing of petroleum, shale oil, and from coal conversion and lignite liquefaction have been successfully treated for use as boiler feedwater, cooling water makeup, and steam generation. Acid mine drainage has been treated with lime for use in revegetation of spoil areas. Use of tailings decant water for use in a mill concentrator was reported. Ionizing radiation was effective in disinfecting wastewater makeup to power plant cooling systems. The zero discharge concept was demonstrated in several power plants. Reverse osmosis is reported to be the most economical technology for treatment of cooling tower blowdown. It has the capability of 44% recovery of boric acid and 55% recovery of water from nuclear power plant radioactive wastewater. Included are 402 references

  13. Diffraction traveltime approximation for TI media with an inhomogeneous background

    KAUST Repository

    Waheed, Umair bin; Alkhalifah, Tariq Ali; Stovas, A.

    2013-01-01

    Diffractions in seismic data contain valuable information that can help improve our modeling capability for better imaging of the subsurface. They are especially useful for anisotropic media because they inherently possess a wide range of dips necessary to resolve the angular dependence of velocity. We develop a scheme for diffraction traveltime computations based on perturbation of the anellipticity anisotropy parameter for transversely isotropic media with tilted axis of symmetry (TTI). The expansion, therefore, uses an elliptically anisotropic medium with tilt as the background model. This formulation has advantages on two fronts: first, it alleviates the computational complexity associated with solving the TTI eikonal equation, and second, it provides a mechanism to scan for the best-fitting anellipticity parameter η without the need for repetitive modeling of traveltimes, because the traveltime coefficients of the expansion are independent of the perturbed parameter η. The accuracy of such an expansion is further enhanced by the use of Shanks transform. We established the effectiveness of the proposed formulation with tests on a homogeneous TTI model and complex media such as the Marmousi and BP models.

  14. Diffraction traveltime approximation for TI media with an inhomogeneous background

    KAUST Repository

    Waheed, Umair bin

    2013-09-01

    Diffractions in seismic data contain valuable information that can help improve our modeling capability for better imaging of the subsurface. They are especially useful for anisotropic media because they inherently possess a wide range of dips necessary to resolve the angular dependence of velocity. We develop a scheme for diffraction traveltime computations based on perturbation of the anellipticity anisotropy parameter for transversely isotropic media with tilted axis of symmetry (TTI). The expansion, therefore, uses an elliptically anisotropic medium with tilt as the background model. This formulation has advantages on two fronts: first, it alleviates the computational complexity associated with solving the TTI eikonal equation, and second, it provides a mechanism to scan for the best-fitting anellipticity parameter η without the need for repetitive modeling of traveltimes, because the traveltime coefficients of the expansion are independent of the perturbed parameter η. The accuracy of such an expansion is further enhanced by the use of Shanks transform. We established the effectiveness of the proposed formulation with tests on a homogeneous TTI model and complex media such as the Marmousi and BP models.

  15. Oil sands tailings technology : understanding the impact to reclamation

    Energy Technology Data Exchange (ETDEWEB)

    Mamer, M. [Suncor Energy Inc., Fort McMurray, AB (Canada)

    2010-07-01

    This paper discussed tailings management techniques at oil sands mines and their effects on reclamation schedules and outcomes. The layer of mature fine tailings (MFT) that forms in tailings ponds does not settle within a reasonable time frame, requiring more and larger tailings ponds for storing MFT. Consolidated tailings (CT) technology was developed to accelerate the consolidation of MFT, although the process nonetheless takes decades. CT is produced from mixing tailings sand, gypsum, and MFT to create a mixture that will consolidate more quickly and release water. However, CT production is tied to the extraction process, making it applicable only when the plant is operational, and a precise recipe and accurate injection are required for CT to work. In tailings reduction operations (TRO), a new approach to tailings management, MFT is mixed with a polymer flocculant, deposited in thin layers, and allowed to dry. TRO has a significant advantage over CT in that the latter takes up to 30 years to consolidate to a trafficable surface compared to weeks for TRO. TRO allows MFT to be consumed more quickly than it is produced, reducing need to build more tailings ponds, operates independent of plant operations, accelerates the reclamation time frame, and offers enhanced flexibility in final tailings placement sites. TRO also creates a dry landscape, to which well established reclamation techniques can be applied. Dried MFT is a new material type, and research is exploring optimum reclamation techniques. 2 figs.

  16. Fate of NDMA precursors through an MBR-NF pilot plant for urban wastewater reclamation and the effect of changing aeration conditions.

    Science.gov (United States)

    Mamo, Julian; Insa, Sara; Monclús, Hèctor; Rodríguez-Roda, Ignasi; Comas, Joaquim; Barceló, Damià; Farré, Maria José

    2016-10-01

    The removal of N-nitrosodimethylamine (NDMA) formation potential through a membrane bioreactor (MBR) coupled to a nanofiltration (NF) pilot plant that treats urban wastewater is investigated. The results are compared to the fate of the individual NDMA precursors detected: azithromycin, citalopram, erythromycin, clarithromycin, ranitidine, venlafaxine and its metabolite o-desmethylvenlafaxine. Specifically, the effect of dissolved oxygen in the aerobic chamber of the MBR pilot plant on the removal of NDMA formation potential (FP) and individual precursors is studied. During normal aerobic operation, implying a fully nitrifying system, the MBR was able to reduce NDMA precursors above 94%, however this removal percentage was reduced to values as low as 72% when changing the conditions to minimize nitrification. Removal decreased also for azithromycin (68-59%), citalopram (31-17%), venlafaxine (35-15%) and erythromycin (61-16%) on average during nitrifying versus non-nitrifying conditions. The removal of clarithromycin, o-desmethylvenlafaxine and ranitidine could not be correlated with the nitrification inhibition, as it varied greatly during the experiment time. The MBR pilot plant is coupled to a nanofiltration (NF) system and the results on the rejection of both, NDMA FP and individual precursors, through this system was above 90%. Finally, results obtained for the MBR pilot plant are compared to the percentage of removal by a conventional full scale biological wastewater treatment plant (WWTP) fed with the same influent. During aerobic operation, the removal of NDMA FP by the MBR pilot plant was similar to the full scale WWTP. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. The forestry reclamation approach in Appalachia

    Energy Technology Data Exchange (ETDEWEB)

    Angel, P.N.; Burger, J.A.; Skousen, J.; Barton, C.D.

    2009-04-01

    The Appalachian Regional Reforestation Initiative (ARRI) was formed in 2005 to promote the planting of high-value hardwood trees on reclaimed coal mined lands and abandoned mine lands in Appalachia. In addition to planting more trees, ARRI's vision is to increase the survival rate of the planted trees and build a productive forest ecosystem that encourage natural succession of native forest plants by promoting the use of Forestry Reclamation Approach (FRA). This article described the 5 steps of the FRA, which include (1) creating a suitable rooting medium for good tree growth that is no less than 4 feet deep and comprised of topsoil, weathered sandstone, and/or the best available material, (2) loosely grading the topsoil or topsoil substitutes established in step one to create a non-compacted growth medium, (3) using ground covers that are compatible with growing trees, (4) planting two types of trees, an early succession species for wildlife and soil stability as well as commercially valuable crop trees, and (5) using proper tree planting techniques. The ARRI has been most successful in spreading the FRA by building partnerships with groups and individuals that share the common goal of science-base surface mine reforestation. 4 refs., 9 figs.

  18. Reclamation of colliery mine spoil founded on natural succession

    International Nuclear Information System (INIS)

    Jochimsen, M.E.A.

    1996-01-01

    Reclamation of derelict land is of great concern for industrial countries. Technically produced and biologically inactive soils are said to be hostile to plants. Therefore, great effort is applied, in order to reintegrate them into the landscape. Ordinarily plant settlement starts with pioneer plants, especially herbs. Reafforestation, in this case, is an ecological misunderstanding. A method of mimicking natural succession including its ecological and economic advantages is described. The results of an applied experiment on virgin mine spoil with respect to species number, plant cover degree, and above ground phytomass production in the course of six years are reported in this paper. 12 refs., 4 figs

  19. Using Native Plants in the Reclamation of Areas Affected of Mining Activities in the Rodrigatos River Valley (El Bierzo, Leon, Spain)

    International Nuclear Information System (INIS)

    Galean, L.; Gamarra, R.; Sainz, H.; Millan, R.

    2010-01-01

    It is difficult for sites affected by mining to be colonized by vegetation and thus they suffer a slow recovery to a healthy ecosystem and, as a result, restoration work is necessary. The aim of this report is to propose a set of native species which are conducive to establishing a stable and self-sufficient plant community that will protect the soil and contribute to the rapid integration into the landscape of the areas affected by mining in the upper basin of the river Rodrigatos in the region of El Bierzo (Leon) An analysis of plant communities was undertaken using the phyto sociological method of Braun-Blanquet in order to subsequently select, using ecological criteria, the most suitable species for revegetation. Plant mapping using ortho photos was also developed in order to identify and delineate the location of the different landscape units. Among candidate species, in the first revegetation phase, we suggest a variety of herbs that are able to fix soils and protect them from erosion; species of the genus Cytisus and Genista in areas of moderate slope and species such as Rumex induratus Boiss and Reuter, Erysimum linifolium (Pourr. Ex Pers .) Jay in steeper areas because of their rooting ability. In later stages, the introduction of tree species characteristic for each formation is recommended. Furthermore, in the riverside areas species such as Carex elata subsp.reuteriana (Boiss.) Lucen and Aedo, Alnus glutinosa (L.) and Salix atrocinerea Brot. are proposed for introduction from the fi rst stage onwards. The species proposed in this study include some not commonly used in restoration, so a subsequent more detailed study would be required in order to assess their degree of suitability for this use. (Author) 65 refs.

  20. Traveltime sensitivity kernels for wave equation tomography using the unwrapped phase

    KAUST Repository

    Djebbi, Ramzi

    2014-02-18

    Wave equation tomography attempts to improve on traveltime tomography, by better adhering to the requirements of our finite-frequency data. Conventional wave equation tomography, based on the first-order Born approximation followed by cross-correlation traveltime lag measurement, or on the Rytov approximation for the phase, yields the popular hollow banana sensitivity kernel indicating that the measured traveltime at a point is insensitive to perturbations along the ray theoretical path at certain finite frequencies. Using the instantaneous traveltime, which is able to unwrap the phase of the signal, instead of the cross-correlation lag, we derive new finite-frequency traveltime sensitivity kernels. The kernel reflects more the model-data dependency, we typically encounter in full waveform inversion. This result confirms that the hollow banana shape is borne of the cross-correlation lag measurement, which exposes the Born approximations weakness in representing transmitted waves. The instantaneous traveltime can thus mitigate the additional component of nonlinearity introduced by the hollow banana sensitivity kernels in finite-frequency traveltime tomography. The instantaneous traveltime simply represents the unwrapped phase of Rytov approximation, and thus is a good alternative to Born and Rytov to compute the misfit function for wave equation tomography. We show the limitations of the cross-correlation associated with Born approximation for traveltime lag measurement when the source signatures of the measured and modelled data are different. The instantaneous traveltime is proven to be less sensitive to the distortions in the data signature. The unwrapped phase full banana shape of the sensitivity kernels shows smoother update compared to the banana–doughnut kernels. The measurement of the traveltime delay caused by a small spherical anomaly, embedded into a 3-D homogeneous model, supports the full banana sensitivity assertion for the unwrapped phase.

  1. Traveltime sensitivity kernels for wave equation tomography using the unwrapped phase

    KAUST Repository

    Djebbi, Ramzi; Alkhalifah, Tariq Ali

    2014-01-01

    Wave equation tomography attempts to improve on traveltime tomography, by better adhering to the requirements of our finite-frequency data. Conventional wave equation tomography, based on the first-order Born approximation followed by cross-correlation traveltime lag measurement, or on the Rytov approximation for the phase, yields the popular hollow banana sensitivity kernel indicating that the measured traveltime at a point is insensitive to perturbations along the ray theoretical path at certain finite frequencies. Using the instantaneous traveltime, which is able to unwrap the phase of the signal, instead of the cross-correlation lag, we derive new finite-frequency traveltime sensitivity kernels. The kernel reflects more the model-data dependency, we typically encounter in full waveform inversion. This result confirms that the hollow banana shape is borne of the cross-correlation lag measurement, which exposes the Born approximations weakness in representing transmitted waves. The instantaneous traveltime can thus mitigate the additional component of nonlinearity introduced by the hollow banana sensitivity kernels in finite-frequency traveltime tomography. The instantaneous traveltime simply represents the unwrapped phase of Rytov approximation, and thus is a good alternative to Born and Rytov to compute the misfit function for wave equation tomography. We show the limitations of the cross-correlation associated with Born approximation for traveltime lag measurement when the source signatures of the measured and modelled data are different. The instantaneous traveltime is proven to be less sensitive to the distortions in the data signature. The unwrapped phase full banana shape of the sensitivity kernels shows smoother update compared to the banana–doughnut kernels. The measurement of the traveltime delay caused by a small spherical anomaly, embedded into a 3-D homogeneous model, supports the full banana sensitivity assertion for the unwrapped phase.

  2. Coleman Collieries reclamation project

    International Nuclear Information System (INIS)

    Brand, D.

    2006-01-01

    The Municipality of Crowsnest Pass in Southern Alberta is the home to one of the largest and most important coal centres in Canada since the early 1900s. The Coleman Collieries operated from 1903 until 1983 and has been idle since 1983 with remnants of several eras of coal production being represented in the buildings remaining on the 300 acre plant site. This paper examined the remediation of the site. It included a discussion of challenges and issues such as construction and operation predating environmental legislation; its historical importance as recognized by provincial and federal governments; its location which is adjacent to a municipal business centre; and the fact that one of Alberta's most important sport fishing rivers flows through the site. The paper also discussed the need for remediation criteria and consensus with regulators, public, stakeholders, and municipal, provincial and federal governments as to a final land use plan for the property. The paper discussed progress and status of the project and provided an update on stakeholder consultation as well as future work. A subgroup of the Coleman Collieries Liaison Committee is working on an historical development proposal for the remainder of the site with the purpose of developing a financially sustainable historical site that is acceptable to the local community. Other options being considered include parkland, commercial and residential development

  3. Changing knowledge needs for wellsite reclamation

    International Nuclear Information System (INIS)

    Smith, J.

    1996-01-01

    The educational and informational sources available in the field of land reclamation were reviewed, and a qualitative assessment of their effectiveness was made. The focus was on reclamation of abandoned petroleum wellsite and related facilities within the province of Alberta. The review showed that land reclamation involves knowledge and experience from several scientific disciplines, as well as technological expertise, an understanding of the legislative environment and the impacts of such legislation on stakeholders who are party to a site reclamation. Since the combination of these necessary skills is not always present, there is a need for formalized educational opportunities. The review identified a number of institutions offering reclamation related programs; also professional and industry associations which also provide reliable and consistent information. By contrast, regulatory requirements frequently contain inconsistencies between reclamation criteria and common law; these should be addressed and remedied as soon as practicable. 1 ref

  4. Traveltime approximations for transversely isotropic media with an inhomogeneous background

    KAUST Repository

    Alkhalifah, Tariq

    2011-05-01

    A transversely isotropic (TI) model with a tilted symmetry axis is regarded as one of the most effective approximations to the Earth subsurface, especially for imaging purposes. However, we commonly utilize this model by setting the axis of symmetry normal to the reflector. This assumption may be accurate in many places, but deviations from this assumption will cause errors in the wavefield description. Using perturbation theory and Taylor\\'s series, I expand the solutions of the eikonal equation for 2D TI media with respect to the independent parameter θ, the angle the tilt of the axis of symmetry makes with the vertical, in a generally inhomogeneous TI background with a vertical axis of symmetry. I do an additional expansion in terms of the independent (anellipticity) parameter in a generally inhomogeneous elliptically anisotropic background medium. These new TI traveltime solutions are given by expansions in and θ with coefficients extracted from solving linear first-order partial differential equations. Pade approximations are used to enhance the accuracy of the representation by predicting the behavior of the higher-order terms of the expansion. A simplification of the expansion for homogenous media provides nonhyperbolic moveout descriptions of the traveltime for TI models that are more accurate than other recently derived approximations. In addition, for 3D media, I develop traveltime approximations using Taylor\\'s series type of expansions in the azimuth of the axis of symmetry. The coefficients of all these expansions can also provide us with the medium sensitivity gradients (Jacobian) for nonlinear tomographic-based inversion for the tilt in the symmetry axis. © 2011 Society of Exploration Geophysicists.

  5. Traveltime approximations for transversely isotropic media with an inhomogeneous background

    KAUST Repository

    Alkhalifah, Tariq

    2011-01-01

    A transversely isotropic (TI) model with a tilted symmetry axis is regarded as one of the most effective approximations to the Earth subsurface, especially for imaging purposes. However, we commonly utilize this model by setting the axis of symmetry normal to the reflector. This assumption may be accurate in many places, but deviations from this assumption will cause errors in the wavefield description. Using perturbation theory and Taylor's series, I expand the solutions of the eikonal equation for 2D TI media with respect to the independent parameter θ, the angle the tilt of the axis of symmetry makes with the vertical, in a generally inhomogeneous TI background with a vertical axis of symmetry. I do an additional expansion in terms of the independent (anellipticity) parameter in a generally inhomogeneous elliptically anisotropic background medium. These new TI traveltime solutions are given by expansions in and θ with coefficients extracted from solving linear first-order partial differential equations. Pade approximations are used to enhance the accuracy of the representation by predicting the behavior of the higher-order terms of the expansion. A simplification of the expansion for homogenous media provides nonhyperbolic moveout descriptions of the traveltime for TI models that are more accurate than other recently derived approximations. In addition, for 3D media, I develop traveltime approximations using Taylor's series type of expansions in the azimuth of the axis of symmetry. The coefficients of all these expansions can also provide us with the medium sensitivity gradients (Jacobian) for nonlinear tomographic-based inversion for the tilt in the symmetry axis. © 2011 Society of Exploration Geophysicists.

  6. Refraction traveltime tomography with irregular topography using the unwrapped phase inversion

    KAUST Repository

    Choi, Yun Seok

    2013-01-01

    Traveltime tomography has long served as a stable and efficient tool for velocity estimation, especially for the near surface. It, however, suffers from some of limitations associated with ray tracing and high-frequency traveltime in velocity inversion zones and ray shadow regions. We develop a tomographic approach based on traveltime solutions obtained by tracking the phase (instantaneous traveltime) of the wavefield solution of the Helmholtz wave equation. Since the instantaneous-traveltime does not suffer from phase wrapping, the inversion algorithm using the instantaneous-traveltime has the potential to generate robust inversion results. With a high damping factor, the instantaneous-traveltime inversion provides refraction tomography similar results, but from a single frequency. Despite the Helmholtz-based solver implementation, the tomographic inversion handles irrgular topography. The numerical examples show that our inversion algorithm generates a convergent smooth velocity model, which looks very much like a tomographic result. Next, we plan to apply the instantaneous-traveltime inversion algorithm to real seismic data acquired from the near surface with irregular topography.

  7. Local Ray-Based Traveltime Computation Using the Linearized Eikonal Equation

    KAUST Repository

    Almubarak, Mohammed S.

    2013-05-01

    The computation of traveltimes plays a critical role in the conventional implementations of Kirchhoff migration. Finite-difference-based methods are considered one of the most effective approaches for traveltime calculations and are therefore widely used. However, these eikonal solvers are mainly used to obtain early-arrival traveltime. Ray tracing can be used to pick later traveltime branches, besides the early arrivals, which may lead to an improvement in velocity estimation or in seismic imaging. In this thesis, I improved the accuracy of the solution of the linearized eikonal equation by constructing a linear system of equations (LSE) based on finite-difference approximation, which is of second-order accuracy. The ill-conditioned LSE is initially regularized and subsequently solved to calculate the traveltime update. Numerical tests proved that this method is as accurate as the second-order eikonal solver. Later arrivals are picked using ray tracing. These traveltimes are binned to the nearest node on a regular grid and empty nodes are estimated by interpolating the known values. The resulting traveltime field is used as an input to the linearized eikonal algorithm, which improves the accuracy of the interpolated nodes and yields a local ray-based traveltime. This is a preliminary study and further investigation is required to test the efficiency and the convergence of the solutions.

  8. Local Ray-Based Traveltime Computation Using the Linearized Eikonal Equation

    KAUST Repository

    Almubarak, Mohammed S.

    2013-01-01

    used. However, these eikonal solvers are mainly used to obtain early-arrival traveltime. Ray tracing can be used to pick later traveltime branches, besides the early arrivals, which may lead to an improvement in velocity estimation or in seismic imaging

  9. An eikonal-based formulation for traveltime perturbation with respect to the source location

    KAUST Repository

    Alkhalifah, Tariq

    2010-11-01

    Traveltime calculations amount to solving the nonlinear eikonal equation for a given source location. The relationship between the eikonal solution and its perturbations is analyzed with respect to the source location and a partial differential equation is developed that relates the traveltime field for one source location to that for a nearby source. This linear first-order equation in one form depends on lateral changes in velocity and in another form is independent of the velocity field and relies on second-order derivatives of the original traveltime field. For stable finite-difference calculations, this requires the velocity field to be smooth in a sense similar to ray-tracing requirements. Our formulation for traveltime perturbation has several potential applications, such that as traveltime calculation by source-location perturbation, velocity-independent interpolation including datuming, and velocity estimation. Additionally, higher-order expansions provide parameters necessary for Gaussian-beam computations. © 2010 Society of Exploration Geophysicists.

  10. An eikonal-based formulation for traveltime perturbation with respect to the source location

    KAUST Repository

    Alkhalifah, Tariq; Fomel, Sergey

    2010-01-01

    Traveltime calculations amount to solving the nonlinear eikonal equation for a given source location. The relationship between the eikonal solution and its perturbations is analyzed with respect to the source location and a partial differential equation is developed that relates the traveltime field for one source location to that for a nearby source. This linear first-order equation in one form depends on lateral changes in velocity and in another form is independent of the velocity field and relies on second-order derivatives of the original traveltime field. For stable finite-difference calculations, this requires the velocity field to be smooth in a sense similar to ray-tracing requirements. Our formulation for traveltime perturbation has several potential applications, such that as traveltime calculation by source-location perturbation, velocity-independent interpolation including datuming, and velocity estimation. Additionally, higher-order expansions provide parameters necessary for Gaussian-beam computations. © 2010 Society of Exploration Geophysicists.

  11. Efficient Traveltime Solutions of the TI Acoustic Eikonal Equation

    KAUST Repository

    Waheed, Umair bin

    2014-10-22

    Numerical solutions of the eikonal (Hamilton-Jacobi) equation for transversely isotropic (TI) media are essential for integral imaging and traveltime tomography applications. Such solutions, however, suffer from the inherent higher-order nonlinearity of the TI eikonal equation, which requires solving a quartic polynomial at each computational step. Using perturbation theory, we approximate the first-order discretized form of the TI eikonal equation with a series of simpler equations for the coefficients of a polynomial expansion of the eikonal solution in terms of the anellipticity anisotropy parameter. Such perturbation, applied to the discretized form of the eikonal equation, does not impose any restrictions on the complexity of the perturbed parameter field. Therefore, it provides accurate traveltime solutions even for the anisotropic Marmousi model, with complex distribution of velocity and anellipticity anisotropy parameter. The formulation allows tremendous cost reduction compared to using the exact TI eikonal solver. Furthermore, comparative tests with previously developed approximations illustrate remarkable gain in accuracy of the proposed approximation, without any addition to the computational cost.

  12. Efficient Traveltime Solutions of the TI Acoustic Eikonal Equation

    KAUST Repository

    Waheed, Umair bin; Alkhalifah, Tariq Ali

    2014-01-01

    Numerical solutions of the eikonal (Hamilton-Jacobi) equation for transversely isotropic (TI) media are essential for integral imaging and traveltime tomography applications. Such solutions, however, suffer from the inherent higher-order nonlinearity of the TI eikonal equation, which requires solving a quartic polynomial at each computational step. Using perturbation theory, we approximate the first-order discretized form of the TI eikonal equation with a series of simpler equations for the coefficients of a polynomial expansion of the eikonal solution in terms of the anellipticity anisotropy parameter. Such perturbation, applied to the discretized form of the eikonal equation, does not impose any restrictions on the complexity of the perturbed parameter field. Therefore, it provides accurate traveltime solutions even for the anisotropic Marmousi model, with complex distribution of velocity and anellipticity anisotropy parameter. The formulation allows tremendous cost reduction compared to using the exact TI eikonal solver. Furthermore, comparative tests with previously developed approximations illustrate remarkable gain in accuracy of the proposed approximation, without any addition to the computational cost.

  13. Efficient traveltime solutions of the acoustic TI eikonal equation

    KAUST Repository

    Waheed, Umair bin

    2015-02-01

    Numerical solutions of the eikonal (Hamilton-Jacobi) equation for transversely isotropic (TI) media are essential for imaging and traveltime tomography applications. Such solutions, however, suffer from the inherent higher-order nonlinearity of the TI eikonal equation, which requires solving a quartic polynomial for every grid point. Analytical solutions of the quartic polynomial yield numerically unstable formulations. Thus, it requires a numerical root finding algorithm, adding significantly to the computational load. Using perturbation theory we approximate, in a first order discretized form, the TI eikonal equation with a series of simpler equations for the coefficients of a polynomial expansion of the eikonal solution, in terms of the anellipticity anisotropy parameter. Such perturbation, applied to the discretized form of the eikonal equation, does not impose any restrictions on the complexity of the perturbed parameter field. Therefore, it provides accurate traveltime solutions even for models with complex distribution of velocity and anisotropic anellipticity parameter, such as that for the complicated Marmousi model. The formulation allows for large cost reduction compared to using the direct TI eikonal solver. Furthermore, comparative tests with previously developed approximations illustrate remarkable gain in accuracy in the proposed algorithm, without any addition to the computational cost.

  14. Draft reclamation program plan for site characterization

    International Nuclear Information System (INIS)

    1989-08-01

    As part of its obligations under the Nuclear Waste Policy Act, as amended, the US Department of Energy (DOE) has developed an environmental program that is to be implemented during site characterization at the Yucca Mountain site. This site is proposed for the location of the nation's first high-level radioactive waste repository. A program for the reclamation of areas disturbed by site characterization is part of the overall environmental program for that site. This Reclamation Program Plan (RPP) describes the reclamation policy of the DOE for the Yucca Mountain site and presents an overview of the reclamation program. The RPP also provides an overview of the reclamation needs relative to site characterization; a review of legislation and requirements pertinent to reclamation; and a review of previous commitments made by the DOE to certain types of reclamation activities. The objective of the DOE reclamation program at Yucca Mountain is to return land disturbed by site-characterization activities to a stable ecological state with a form and productivity similar to the predisturbance state. The DOE will take all reasonable and necessary steps to achieve this objective. 19 refs., 2 tabs

  15. 36 CFR 9.11 - Reclamation requirements.

    Science.gov (United States)

    2010-07-01

    ... MINERALS MANAGEMENT Mining and Mining Claims § 9.11 Reclamation requirements. (a) As contemporaneously as... within the time specified in an approved mining reclamation plan, unless a longer period is authorized in... topsoil necessary for vegetative restoration; and (vi) Reestablishing native vegetative communities. (b...

  16. Alberta Reclamation Research annual report, 1990

    International Nuclear Information System (INIS)

    1991-01-01

    The Reclamation Research Technical Advisory Committee (RRTAC) was appointed by the Alberta Land Conservation and Reclamation Council to assist in technical matters related to the development and administration of the Council's research program. RRTAC develops reclamation research under four major program areas, and activities in these areas during the year are described in this report. The Plains Coal Reclamation Research Program addresses questions relating to groundwater and soil reconstruction in plains coal mining zones. The Mountain and Foothills Reclamation Research Program focuses on water management, soil reconstruction, reforestation, and wildlife habitat development, with objectives including control of erosion on a variety of disturbances such as coal mines and ash pits. The Oil Sands Reclamation Research Program is attempting to develop techniques to establish self-sustaining, erosion-free cover on oil sand tailings pond dikes, and to return tailings sand storage and overburden dumps to productive forests. The Oil and Gas Reclamation Research Program is concerned with disposal of drilling wastes and reclamation of lands disturbed by oil and gas activities. Under each program, the objectives, basic problems investigated, and research approach are presented, followed by description of specific projects involving such subjects as hydrology, revegetation, soil-water interactions, landscape and watershed design, soil reconstruction and amendment, and soil compaction. A list of research reports is included. 69 refs., 8 figs

  17. Waste acid detoxification and reclamation

    International Nuclear Information System (INIS)

    Brouns, T.M.; Stewart, T.L.

    1988-01-01

    Economically feasible processes that reduce the volume, quantity, and toxicity of metal-bearing waste acids by reclaiming, reusing, and recycling spent acids and metal salts are being developed and demonstrated. The acids used in the demonstrations are generated during metal-finishing operations used in nuclear fuel fabrication; HF-HNO 3 , HNO 3 , and HNO 3 -H 2 SO 4 wastes result from Zr etching, Cu stripping, and chemical milling of U. At discharge, wastes contain high concentrations of acid and one major metal impurity. The waste minimization process used to reclaim acid from these three streams incorporates three processes for acid regeneration and reclamation. Normally, HNO 3 remains in the bottoms when an aqueous acid solution is distilled; however, in the presence of H 2 SO 4 , HNO 3 will distill to the overhead stream. In this process, nitrates and fluorides present as free acid and metal salts can be reclaimed as acid for recycle to the metal-finishing processes. Uranium present in the chemical milling solution can be economically recovered from distillation bottoms and refined. Using acid distillation, the volume of chemical milling solution discharged as waste can be reduced by as much as 60% depending on the H 2 SO 4 concentration. A payback period of 2.2 years has been estimated for this process. The development and demonstration of precipitation and distillation processes for detoxification and reclamation of waste acid is supported by the US Department of Energy's Hazardous Waste Remedial Actions Program (HAZWRAP)

  18. Reclamation challenges at Usibelli Coal Mine in Healy, Alaska

    International Nuclear Information System (INIS)

    Jackson, L.P.

    1998-01-01

    Successful reclamation in the Interior of Alaska requires planning in order to avoid major setbacks. Usibelli Coal Mine is located at a North Latitude of approximately 64 degrees. Temperature extremes in the Interior of Alaska range from a high of 90 degrees Fahrenheit to a low of minus 60 degrees Fahrenheit. The challenges in this sub-arctic climate are many. Several unique reclamation challenges are present due to the cold climate. Discontinuous permafrost is prevalent on north facing slopes. This presents stability problems if placed in inappropriate locations. Very detailed planning is required to assure that no stability problems occur. The construction of drainage channels in ice-rich permafrost areas also requires extra care to assure that water flows along the surface rather than down into the spoil. Mineral topsoil is often not present on the areas to be mined. Often non-salvageable organic permafrost soils are present. These require special handling and must be isolated to avoid stability problems. Since the ground is frozen for 7--8 months a year the reestablishment of vegetation requires a very aggressive planting schedule. Grass seed is applied by fixed wing aircraft and shrubs are planted from locally collected seed. By planning properly prior to mining successful reclamation can take place in the Interior of Alaska

  19. Staunton 1 Reclamation Demonstration Project. Progress report II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-07-01

    The Staunton 1 Reclamation Demonstration Project involves an evaluation of the reclamation process on a 13.8-ha abandoned deep coal mine refuse site in southwestern Illinois. The procedure included collection of preconstruction environmental data, determination of the site's final land use, and development and implementation of a detailed site development plan. Approximately 9.3 ha of refuse material was recontoured, covered with a minimum of 30 cm of soil obtained on site, and seeded with a mixture of grasses and legumes. Hydrologic investigation indicates some improvement in groundwater quality. Surface water quality also has shown improvement, but development of the aquatic ecosystem in the newly-constructed pond is slow. Revegetation has been successful, and a protective plant cover has been established on most areas of the site. Soil tests indicate that acceptable plant growth media have been constructed; however, continued application of fertilizer and limestone will probably be necessary to maintain the vegetation. The soil microbial community has achieved total numbers equal to those of old fields, but species' diversity is low. Small mammals, birds, reptiles, and amphibians have invaded and are utilizing the site. The economic value of the site and adjacent property has increased substantially, and the area's aesthetic value has been enhanced significantly. The two-year period of intensive monitoring and evaluation has been utilized to develop recommendations for improving the designs of future reclamation efforts.

  20. Interim reclamation report: Basalt Waste Isolation Project exploration shaft site

    International Nuclear Information System (INIS)

    Brandt, C.A.; Rickard, W.H. Jr.; Hefty, M.G.

    1990-02-01

    In 1968, a program was started to assess the feasibility of storing Hanford Site defense waste in deep caverns constructed in basalt. This program was expanded in 1976 to include investigations of the Hanford Site as a potential location for a mined commercial nuclear waste repository. Extensive studies of the geotechnical aspects of the site were undertaken, including preparations for drilling a large diameter Exploratory Shaft. This report describes the development of the reclamation program for the Exploratory Shaft Facility, its implementation, and preliminary estimates of its success. The goal of the reclamation program is to return sites disturbed by the repository program as nearly as practicable to their original conditions using native plant species. 43 refs., 19 figs., 9 tabs

  1. 30 CFR 874.13 - Reclamation objectives and priorities.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Reclamation objectives and priorities. 874.13... INTERIOR ABANDONED MINE LAND RECLAMATION GENERAL RECLAMATION REQUIREMENTS § 874.13 Reclamation objectives...)(2)(ii) of this section. (b) This paragraph applies to State or Tribal share funds available under...

  2. 43 CFR 422.3 - Reclamation law enforcement policy.

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Reclamation law enforcement policy. 422.3 Section 422.3 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF RECLAMATION, DEPARTMENT OF THE INTERIOR LAW ENFORCEMENT AUTHORITY AT BUREAU OF RECLAMATION PROJECTS § 422.3 Reclamation law enforcement policy. The law enforcement...

  3. Reclamation of slopes left after surface mining

    Energy Technology Data Exchange (ETDEWEB)

    Zmitko, J [Banske Projekty, Teplice (Czech Republic)

    1993-03-01

    Discusses land reclamation of abandoned slopes from brown coal surface mining in the North Bohemian brown coal basin in the Czech Republic. Problems associated with reclamation of landslide areas in two former coal mines are evaluated: the Otokar mine in Kostany (mining from 1956 to 1966) and the CSM mine in Pozorka (mining from 1955 to 1967). Land reclamation was introduced 25 years after damage occurred. The following aspects are analyzed: hydrogeologic conditions, range of landslides, types of rocks in landslide areas, water conditions, methods for stabilizing slopes, safety aspects.

  4. Interim reclamation report, Basalt Waste Isolation project: Boreholes, 1989

    International Nuclear Information System (INIS)

    Brandt, C.A.; Rickard, W.H. Jr.; Hefty, M.G.

    1990-03-01

    In 1968, a program was started to assess the feasibility of storing Hanford Site defense waste in deep caverns constructed in basalt. This program was expanded in 1976 to include investigations of the Hanford Site as a potential location for a mined commercial nuclear waste repository. An extensive site characterization program was begun to determine the feasibility of using the basalts beneath the Hanford Site for the repository. Site research focused primarily on determining the direction and speed of groundwater movement, the uniformity of basalt layers, and tectonic stability. Some 98 boreholes were sited, drilled, deepened, or modified by BWIP between 1977 and 1988 to test the geologic properties of the Site. On December 22, 1987, President Reagan signed into law the Nuclear Waste Policy Amendments Act of 1987, which effectively stopped all repository-related activities except reclamation of disturbed lands at the Hanford Site. This report describes the development of the reclamation program for the BWIP boreholes, its implementation, and preliminary estimates of its success. The goal of the reclamation program is to return sites disturbed by the repository program as nearly as practicable to their original conditions using native plant species. 48 refs., 28 figs., 14 tabs

  5. Visco-acoustic wave-equation traveltime inversion and its sensitivity to attenuation errors

    KAUST Repository

    Yu, Han

    2018-02-23

    A visco-acoustic wave-equation traveltime inversion method is presented that inverts for the shallow subsurface velocity distribution. Similar to the classical wave equation traveltime inversion, this method finds the velocity model that minimizes the squared sum of the traveltime residuals. Even though, wave-equation traveltime inversion can partly avoid the cycle skipping problem, a good initial velocity model is required for the inversion to converge to a reasonable tomogram with different attenuation profiles. When Q model is far away from the real model, the final tomogram is very sensitive to the starting velocity model. Nevertheless, a minor or moderate perturbation of the Q model from the true one does not strongly affect the inversion if the low wavenumber information of the initial velocity model is mostly correct. These claims are validated with numerical tests on both the synthetic and field data sets.

  6. Measurement network design including traveltime determinations to minimize model prediction uncertainty

    NARCIS (Netherlands)

    Janssen, G.M.C.M.; Valstar, J.R.; Zee, van der S.E.A.T.M.

    2008-01-01

    Traveltime determinations have found increasing application in the characterization of groundwater systems. No algorithms are available, however, to optimally design sampling strategies including this information type. We propose a first-order methodology to include groundwater age or tracer arrival

  7. Visco-acoustic wave-equation traveltime inversion and its sensitivity to attenuation errors

    Science.gov (United States)

    Yu, Han; Chen, Yuqing; Hanafy, Sherif M.; Huang, Jiangping

    2018-04-01

    A visco-acoustic wave-equation traveltime inversion method is presented that inverts for the shallow subsurface velocity distribution. Similar to the classical wave equation traveltime inversion, this method finds the velocity model that minimizes the squared sum of the traveltime residuals. Even though, wave-equation traveltime inversion can partly avoid the cycle skipping problem, a good initial velocity model is required for the inversion to converge to a reasonable tomogram with different attenuation profiles. When Q model is far away from the real model, the final tomogram is very sensitive to the starting velocity model. Nevertheless, a minor or moderate perturbation of the Q model from the true one does not strongly affect the inversion if the low wavenumber information of the initial velocity model is mostly correct. These claims are validated with numerical tests on both the synthetic and field data sets.

  8. Wave equation tomography using the unwrapped phase - Analysis of the traveltime sensitivity kernels

    KAUST Repository

    Djebbi, Ramzi; Alkhalifah, Tariq Ali

    2013-01-01

    equation tomography (WET) tries to improve on traveltime tomography, by better adhering to the requirements of our finite-frequency data. However, conventional (WET), based on the crosscorelaion lag, yields the popular hallow banana sensitivity kernel

  9. Value of travel-time reliability : commuters' route-choice behavior in the Twin Cities.

    Science.gov (United States)

    2011-10-01

    Travel-time variability is a noteworthy factor in network performance. It measures the temporal uncertainty experienced by users in their : movement between any two nodes in a network. The importance of the time variance depends on the penalties incu...

  10. Incorporating travel-time reliability into the congestion management process : a primer.

    Science.gov (United States)

    2015-02-01

    This primer explains the value of incorporating travel-time reliability into the Congestion Management Process (CMP) : and identifies the most current tools available to assist with this effort. It draws from applied research and best practices : fro...

  11. Mapping the Qademah Fault with Traveltime, Surface-wave, and Resistivity Tomograms

    KAUST Repository

    Hanafy, Sherif M.

    2015-08-19

    Traveltime, surface-wave, and resistivity tomograms are used to track the buried Qademah fault located near King Abdullah Economic City (KAEC), Saudi Arabia. The fault location is confirmed by the 1) resistivity tomogram obtained from an electrical resistivity experiment, 2) the refraction traveltime tomogram, 3) the reflection image computed from 2D seismic data set recorded at the northern part of the fault, and 4) the surface-wave tomogram.

  12. Mapping the Qademah Fault with Traveltime, Surface-wave, and Resistivity Tomograms

    KAUST Repository

    Hanafy, Sherif M.

    2015-01-01

    Traveltime, surface-wave, and resistivity tomograms are used to track the buried Qademah fault located near King Abdullah Economic City (KAEC), Saudi Arabia. The fault location is confirmed by the 1) resistivity tomogram obtained from an electrical resistivity experiment, 2) the refraction traveltime tomogram, 3) the reflection image computed from 2D seismic data set recorded at the northern part of the fault, and 4) the surface-wave tomogram.

  13. Elastic Wave-equation Reflection Traveltime Inversion Using Dynamic Warping and Wave Mode Decomposition

    KAUST Repository

    Wang, T.

    2017-05-26

    Elastic full waveform inversion (EFWI) provides high-resolution parameter estimation of the subsurface but requires good initial guess of the true model. The traveltime inversion only minimizes traveltime misfits which are more sensitive and linearly related to the low-wavenumber model perturbation. Therefore, building initial P and S wave velocity models for EFWI by using elastic wave-equation reflections traveltime inversion (WERTI) would be effective and robust, especially for the deeper part. In order to distinguish the reflection travletimes of P or S-waves in elastic media, we decompose the surface multicomponent data into vector P- and S-wave seismogram. We utilize the dynamic image warping to extract the reflected P- or S-wave traveltimes. The P-wave velocity are first inverted using P-wave traveltime followed by the S-wave velocity inversion with S-wave traveltime, during which the wave mode decomposition is applied to the gradients calculation. Synthetic example on the Sigbee2A model proves the validity of our method for recovering the long wavelength components of the model.

  14. 3D first-arrival traveltime tomography with modified total variation regularization

    Science.gov (United States)

    Jiang, Wenbin; Zhang, Jie

    2018-02-01

    Three-dimensional (3D) seismic surveys have become a major tool in the exploration and exploitation of hydrocarbons. 3D seismic first-arrival traveltime tomography is a robust method for near-surface velocity estimation. A common approach for stabilizing the ill-posed inverse problem is to apply Tikhonov regularization to the inversion. However, the Tikhonov regularization method recovers smooth local structures while blurring the sharp features in the model solution. We present a 3D first-arrival traveltime tomography method with modified total variation (MTV) regularization to preserve sharp velocity contrasts and improve the accuracy of velocity inversion. To solve the minimization problem of the new traveltime tomography method, we decouple the original optimization problem into two following subproblems: a standard traveltime tomography problem with the traditional Tikhonov regularization and a L2 total variation problem. We apply the conjugate gradient method and split-Bregman iterative method to solve these two subproblems, respectively. Our synthetic examples show that the new method produces higher resolution models than the conventional traveltime tomography with Tikhonov regularization. We apply the technique to field data. The stacking section shows significant improvements with static corrections from the MTV traveltime tomography.

  15. Reclamation project at an abandoned deep mine

    Energy Technology Data Exchange (ETDEWEB)

    Wilkey, M.; Zellmer, S.

    1978-01-01

    The total reclamation of any site requires time, physical control of the site, favorable natural conditions, and a considerable capital investment. It must be realized that processes involving biological systems require time to become established and self-sustaining. The Staunton 1 project has been designed to provide data on many aspects of the reclamation process. Data collected to date indicate a significant improvement in overall environmental quality, a substantial increase in the economic potential of the site and adjacent properties, and a genuine enhancement of the entire area's aesthetic value. The Staunton 1 Reclamation Demonstration Project, in addition to reclaiming this one site, will provide the necessary design data for future reclamation efforts of this type.

  16. Reclamation plans at uranium mill tailings sites

    International Nuclear Information System (INIS)

    Abt, S.R.; Nelson, J.D.

    1990-01-01

    Long-term stability of waste impoundments is of concern because of the long time periods over which various types of waste may remain active. Over the past decade much technology has been developed specifically for reclamation of uranium mill tailings impoundments. Aspects of this technology will be discussed here and is presented as also being directly applicable to reclamation of industrial waste impoundments in general. The paper discusses Title I and Title II sites which represent two different generations in uranium tailings impoundment construction. The comparison between the two represent differences in philosophies as well as in impoundment type. Reclamation of uranium mill tailings impoundments in the U.S. is controlled by Federal legislation, which has set forth the regulatory framework for reclamation plan approval. Title I requirements govern government owned inactive sites and Title II requirements govern active tailings impoundments or those operated by private industries. While the Title I and Title II designation may result in a slightly different regulatory process, reclamation of uranium tailings sites has the same. Differences between Title I and Title II reclamation plans to achieve surface stability relate primarily to the embankment and surface covers. The differences in the cover designs result from site-specific conditions, rather than from differences in engineering approaches or the regulatory process. This paper discusses the site-specific conditions that affect the selection of cover designs, and provides a comparative example to illustrate the effect of this condition

  17. Ecological Aspects of the Performed Thermal Reclamation

    Directory of Open Access Journals (Sweden)

    Łucarz M.

    2015-04-01

    Full Text Available The thermal analysis results of the selected group of binders and the thermal reclamation of one spent moulding sand with organic binder, are presented in the paper. The reclaiming process of the quartz matrix was performed on the basis of the own method of selecting the reclamation temperature. Taking into account thermogravimetric (TG analysis results of the binder, the temperature range - required for performing the efficient reclamation of spent moulding sand containing this binder - was indicated. In order to confirm the assumptions, the thermal reclamation operations were carried out at a temperature similar to the determined on the TG basis and - for comparisons - at lower and higher temperatures. During the reclamation operation the reclaim samples were taken for the loss on ignition testing, aimed at the determination of the process efficiency. Temperature in the reclaimer chamber and gas consumptions were also recorded. On the bases of the thermal analyses, loss on ignition, gas consumption and temperatures of the reclaimed moulding sand bed the recommendations for the realisation of the thermal reclamation were given. These recommendations will allow a better, than currently available, process control in an aspect of decreasing the pyrolysis effect and limiting the emission of substances harmful for the environment.

  18. The offset-midpoint traveltime pyramid in 3D transversely isotropic media with a horizontal symmetry axis

    KAUST Repository

    Hao, Qi

    2014-12-30

    Analytic representation of the offset-midpoint traveltime equation for anisotropy is very important for prestack Kirchhoff migration and velocity inversion in anisotropic media. For transversely isotropic media with a vertical symmetry axis, the offset-midpoint traveltime resembles the shape of a Cheops’ pyramid. This is also valid for homogeneous 3D transversely isotropic media with a horizontal symmetry axis (HTI). We extended the offset-midpoint traveltime pyramid to the case of homogeneous 3D HTI. Under the assumption of weak anellipticity of HTI media, we derived an analytic representation of the P-wave traveltime equation and used Shanks transformation to improve the accuracy of horizontal and vertical slownesses. The traveltime pyramid was derived in the depth and time domains. Numerical examples confirmed the accuracy of the proposed approximation for the traveltime function in 3D HTI media.

  19. Estimation of traveltime and longitudinal dispersion in streams in West Virginia

    Science.gov (United States)

    Wiley, Jeffrey B.; Messinger, Terence

    2013-01-01

    Traveltime and dispersion data are important for understanding and responding to spills of contaminants in waterways. The U.S. Geological Survey (USGS), in cooperation with West Virginia Bureau for Public Health, Office of Environmental Health Services, compiled and evaluated traveltime and longitudinal dispersion data representative of many West Virginia waterways. Traveltime and dispersion data were not available for streams in the northwestern part of the State. Compiled data were compared with estimates determined from national equations previously published by the USGS. The evaluation summarized procedures and examples for estimating traveltime and dispersion on streams in West Virginia. National equations developed by the USGS can be used to predict traveltime and dispersion for streams located in West Virginia, but the predictions will be less accurate than those made with graphical interpolation between measurements. National equations for peak concentration, velocity of the peak concentration, and traveltime of the leading edge had root mean square errors (RMSE) of 0.426 log units (127 percent), 0.505 feet per second (ft/s), and 3.78 hours (h). West Virginia data fit the national equations for peak concentration, velocity of the peak concentration, and traveltime of the leading edge with RMSE of 0.139 log units (38 percent), 0.630 ft/s, and 3.38 h, respectively. The national equation for maximum possible velocity of the peak concentration exceeded 99 percent and 100 percent of observed values from the national data set and West Virginia-only data set, respectively. No RMSE was reported for time of passage of a dye cloud, as estimated using the national equation; however, the estimates made using the national equations had a root mean square error of 3.82 h when compared to data gathered for this study. Traveltime and dispersion estimates can be made from the plots of traveltime as a function of streamflow and location for streams with plots available, but

  20. Prediction of traveltime and longitudinal dispersion in rivers and streams

    Science.gov (United States)

    Jobson, Harvey E.

    1996-01-01

    The possibility of a contaminant being accidentally or intentionally spilled upstream from a water supply is a constant concern to those diverting and using water from streams and rivers. Although many excellent models are available to estimate traveltime and dispersion, none can be used with confidence before calibration and verification to the particular river reach in question. Therefore, the availability of reliable input information is usually the weakest link in the chain of events needed to predict the rate of movement, dilution, and mixing of contaminants in rivers and streams. Measured tracer-response curves produced from the injection of a known quantity of soluble tracer provide an efficient method of obtaining the necessary data. The purpose of this report is to use previously presented concepts along with extensive data collected on time of travel and dispersion to provide guidance to water-resources managers and planners in responding to spills. This is done by providing methods to estimate (1) the rate of movement of a contaminant through a river reach, (2) the rate of attenuation of the peak concentration of a conservative contaminant with time, and (3) the length of time required for the contaminant plume to pass a point in the river. Although the accuracy of the predictions can be greatly increased by performing time-oftravel studies on the river reach in question, the emphasis of this report is on providing methods for making estimates where few data are available. Results from rivers of all sizes can be combined by defining the unit concentration as that concentration of a conservative pollutant that would result from injecting a unit of mass into a unit of flow. Unit-peak concentrations are compiled for more than 60 different rivers representing a wide range of sizes, slopes, and geomorphic types. Analyses of these data indicate that the unitpeak concentration is well correlated with the time required for a pollutant cloud to reach a specific

  1. Land reclamation in the North Bohemian Brown Coal Mines and its effect on the environment

    International Nuclear Information System (INIS)

    Sixta, J.

    1991-01-01

    Land reclamation actually begins the moment the opening of a new mine is planned. The following basic characteristics of the future landscape are decided on: the shape and size of outer waste dumps, location, shape and size of the remaining pit, ground modeling with respect to the airing of the territory and outflow of surface waters, and balance and exploitation of earth that can be made into arable land as well as of other resources. The success of the further use of the territory primarily depends on the mining-technical stage of the land reclamation activity. The biotechnical stage begins after closing the mine. This stage includes the supply of topsoil, a special 5-8 year sowing procedure, planting, etc. The post-reclamation stage, whose aim it is to sustain the desired pedogenetic development, is provided by the subsequent users of the reclaimed plots. The reclamation costs are included in the current mining costs. A detailed discussion is devoted to the economic and legal aspects of the future of reclamation activities. (M.D.). 2 tabs

  2. Potential exposure and treatment efficiency of nanoparticles in water supplies based on wastewater reclamation

    DEFF Research Database (Denmark)

    Kirkegaard, Peter; Hansen, Steffen Foss; Rygaard, Martin

    2015-01-01

    Water scarcity brings an increased focus on wastewater reclamation for drinking water supply. Meanwhile, the production volume of nanoparticles (NPs) is rapidly increasing, but to date there has been little attention given to the fate of NPs in water systems based on wastewater reclamation. We have...... investigated the possible concentrations of silver (Ag), titanium dioxide (TiO2), and zinc oxide (ZnO) nanoparticles in tap water for water supplies based on reclaimed wastewater. Tap water concentrations of the NPs were assessed by mass flow analyses of two typical wastewater reclamation concepts: 1) advanced...... studies are available on the removal efficiencies of NPs by advanced water treatment processes with a majority of the identified studies focusing on removal efficiencies in wastewater treatment plants and fate in surface waters. The NP removal efficiency of several treatment processes is unknown...

  3. Water reclamation and effluent retreatment system at Jaduguda

    Energy Technology Data Exchange (ETDEWEB)

    Beri, K K [Uranium Corporation of India Limited, Jaduguda Mines, Singhbhum (India)

    1994-06-01

    Neutralization of uranium mill tailing with lime provided in original flow sheet was not found adequate for effluent quality control within limits particularly as regards to{sup 226}Ra and Mn. The same was being controlled by dilution and hence no water was being reclaimed. In October 1987 the Jaduguda mill was expanded to augment its ore processing capacity from 1000 MT/day to 1340 MT/day. This necessitated extra water requirement, which could have been met only with water reclamation. But this would have resulted in build up of pollutant ions apart from less water available for dilution. Hence a composite scheme was made for water reclamation and treatment of effluent with BaCl{sub 2} to precipitate Ba(Ra)So{sub 4} and with lime to precipitate Mn as hydroxide. This effluent treatment plant was commissioned in May 1990 and is working satisfactorily. The scheme is being further modified and augmented to take care of Narwa mine water and sewage treatment plant effluent. (author).

  4. Proceedings of the 2009 Atlantic reclamation conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    This conference provided a forum for industry leaders of reclamation and restoration to advance knowledge, raise awareness and examine problems and solutions in the areas of land and waterway reclamation, restoration and rehabilitation. With a history of resource and industrial development, many communities in Atlantic Canada are faced with the challenge of restoring contaminated sites and abandoned mines sites, including both underground and surface coal mines. The topics discussed at this conference ranged from mine site reclamation, in-situ and ex-situ remediation, contaminated site restoration, erosion and sediment control planning, revegetation planning, wetland and soil quality research, landuse planning, regulation, and environmental risk. One of the 25 presentations featured at this conference has been catalogued separately for inclusion in this database. tabs., figs.

  5. An adaptive phase space method with application to reflection traveltime tomography

    International Nuclear Information System (INIS)

    Chung, Eric; Qian, Jianliang; Uhlmann, Gunther; Zhao, Hongkai

    2011-01-01

    In this work, an adaptive strategy for the phase space method for traveltime tomography (Chung et al 2007 Inverse Problems 23 309–29) is developed. The method first uses those geodesics/rays that produce smaller mismatch with the measurements and continues on in the spirit of layer stripping without defining the layers explicitly. The adaptive approach improves stability, efficiency and accuracy. We then extend our method to reflection traveltime tomography by incorporating broken geodesics/rays for which a jump condition has to be imposed at the broken point for the geodesic flow. In particular, we show that our method can distinguish non-broken and broken geodesics in the measurement and utilize them accordingly in reflection traveltime tomography. We demonstrate that our method can recover the convex hull (with respect to the underlying metric) of unknown obstacles as well as the metric outside the convex hull. (paper)

  6. Wave equation tomography using the unwrapped phase - Analysis of the traveltime sensitivity kernels

    KAUST Repository

    Djebbi, Ramzi

    2013-01-01

    Full waveform inversion suffers from the high non-linearity in the misfit function, which causes the convergence to a local minimum. In the other hand, traveltime tomography has a quasi-linear misfit function but yields low- resolution models. Wave equation tomography (WET) tries to improve on traveltime tomography, by better adhering to the requirements of our finite-frequency data. However, conventional (WET), based on the crosscorelaion lag, yields the popular hallow banana sensitivity kernel indicating that the measured wavefield at a point is insensitive to perturbations along the ray theoretical path at certain finite frequencies. Using the instantaneous traveltime, the sensitivity kernel reflects more the model-data dependency we grown accustom to in seismic inversion (even phase inversion). Demonstrations on synthetic and the Mamousi model support such assertions.

  7. 43 CFR 423.38 - Operating vessels on Reclamation waters.

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Operating vessels on Reclamation waters... WATERBODIES Rules of Conduct § 423.38 Operating vessels on Reclamation waters. (a) You must comply with... Reclamation waters, and with any restrictions established by an authorized official. (b) You must not operate...

  8. Acidic minespoil reclamation with alkaline biosolids

    International Nuclear Information System (INIS)

    Drill, C.; Lindsay, B.J.; Logan, T.L.

    1998-01-01

    The effectiveness of an alkaline stabilized biosolids product, N-Viro Soil (NVS), was studied at a wild animal preserve in Cumberland, OH. The preserve occupies land that was strip mined for high-sulfur coal. While most of the land has been conventionally reclaimed, several highly acidic hot spots remain. Two of these hot spots were studied through concurrent field, greenhouse, and laboratory projects. In April 1995, NVS was applied at rates ranging from 0--960 mt/ha (wet wt.) to plots at the two sites. The plots were seeded using a standard reclamation mix and soil samples were analyzed for chemical characteristics before and after application and also in 1996 and 1997. Soil pH increased from 3.5 to about 11 in the amended plots and soil EC values increased from 21.0 mmho/cm to a maximum of 6.0 mmho/cm in the amended plots immediately after application. Soil Cu and Zn concentrations also increased in the NVS amended plots, but this did not affect plant germination or growth. By the summer of 1996, soil pH values had decreased to 7.3--8.7 and EC values decreased to 0.34--1.36 mmho/cm to the amended plots. Soil samples were collected in September 1995 for physical analyses. N-Viro Soil improved the moisture retention and water conductivity properties of the spoil. The plots were monitored for growth during the summer of 1995 and plant biomass and soil samples were taken in 1996 and 1997 for trace element and nutrient analysis. NVS did not significantly increase trace element concentrations in the biomass. The addition of NVS to acid mine spoil improves the chemical and physical properties of the spoil material thus aiding vegetative establishment and growth. NVS improves the chemical nature of the spoil by increasing pH and providing micro and macronutrients and improves the physical properties of the spoil with the addition of organic matter

  9. High Frequency Asymptotic Methods for Traveltimes and Anisotropy Parameter Estimation in Azimuthally Varying Media

    KAUST Repository

    Masmoudi, Nabil

    2014-05-01

    Traveltimes are conventionally evaluated by solving the zero-order approximation of the Wentzel, Kramers and Brillouin (WKB) expansion of the wave equation. This high frequency approximation is good enough for most imaging applications and provides us with a traveltime equation called the eikonal equation. The eikonal equation is a non-linear partial differential equation which can be solved by any of the familiar numerical methods. Among the most popular of these methods is the method of characteristics which yields the ray tracing equations and the finite difference approaches. In the first part of the Master Thesis, we use the ray tracing method to solve the eikonal equation to get P-waves traveltimes for orthorhombic models with arbitrary orientation of symmetry planes. We start with a ray tracing procedure specified in curvilinear coordinate system valid for anisotropy of arbitrary symmetry. The coordinate system is constructed so that the coordinate lines are perpendicular to the symmetry planes of an orthorohombic medium. Advantages of this approach are the conservation of orthorhombic symmetry throughout the model and reduction of the number of parameters specifying the model. We combine this procedure with first-order ray tracing and dynamic ray tracing equations for P waves propagating in smooth, inhomogeneous, weakly anisotropic media. The first-order ray tracing and dynamic ray tracing equations are derived from the exact ones by replacing the exact P-wave eigenvalue of the Christoffel matrix by its first-order approximation. In the second part of the Master Thesis, we compute traveltimes using the fast marching method and we develop an approach to estimate the anisotropy parameters. The idea is to relate them analytically to traveltimes which is challenging in inhomogeneous media. Using perturbation theory, we develop traveltime approximations for transversely isotropic media with horizontal symmetry axis (HTI) as explicit functions of the

  10. Land Reclamation Program annual report, 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-09-01

    The Argonne Land Reclamation Program, sponsored by the United States Department of Energy's Assistant Secretary for Environment, is a joint effort of two Argonne divisions: Energy and Environmental Systems and Environmental Impact Studies. The program is carried out by a multidisciplinary team of scientists and engineers and has three primary objectives: (1) to develop energy-efficient and cost-effective mining and reclamation techniques; (2) to assist industry in evaluating the viability of environmental regulations and demonstrating techniques to meet these regulations; and (3) to supply data and evaluation techniques to decisionmakers concerned with trade-offs between energy development and environmental quality. Six integrated field research sites have been established to address problems associated with surface mining operations. This program relies heavily on input from industry and has developed working arrangements with coal companies at each of the current mining sites. A major area of interest is the development of a ten-year environmental mining and reclamation research plan for the Assistant Secretary for Environment. The Land Reclamation Program assigns the highest priority to the transfer to users of information generated by its research.

  11. 36 CFR 9.39 - Reclamation requirements.

    Science.gov (United States)

    2010-07-01

    ... MINERALS MANAGEMENT Non-Federal Oil and Gas Rights § 9.39 Reclamation requirements. (a) Within the time... Director consistent with the unit purpose and management objectives; (ii) Removing all other man-made... to a condition which does not jeopardize visitor safety or public use of the unit. ...

  12. Basalt Waste Isolation Project exploratory shaft site: Final reclamation report

    International Nuclear Information System (INIS)

    Brandt, C.A.; Rickard, W.H. Jr.

    1990-06-01

    The restoration of areas disturbed by activities of the Basalt Waste Isolation Project (BWIP) constitutes a unique operation at the US Department of Energy's (DOE) Hanford Site, both from the standpoint of restoration objectives and the time frame for accomplishing these objectives. The BWIP reclamation program comprises three separate projects: borehole reclamation, Near Surface Test Facility (NSTF) reclamation, and Exploratory Shaft Facility (ESF) reclamation. The main focus of this report is on determining the success of the revegetation effort 1 year after work was completed. This report also provides a brief overview of the ESF reclamation program. 21 refs., 7 figs., 14 tabs

  13. Vegetation development and native species establishment in reclaimed coal mine lands in Alberta : directions for reclamation planning

    Energy Technology Data Exchange (ETDEWEB)

    Longman, P. [Calgary Univ., AB (Canada). Faculty of Environmental Design

    2010-07-01

    This paper discussed a study undertaken to evaluate reclamation vegetation at Coal Valley Mine in Alberta with respect to expected vegetation changes over time, establishing a successional model of vegetation development, and factors contributing to the observed patterns. Most of the expected vegetation trends were evident, including lower grass cover and height, lower legume cover, a higher degree of native plant species richness, and the establishment of woody species. Four vegetation communities (2 graminoid-dominated and 2 conifer-dominated) were identified in the study, for which a possible successional model was constructed. Vegetation dynamics for agronomic grasses, legumes, and tree cover were discussed. Areas with Lodgepole Pine were found to have higher species richness and cover. Concerns were raised that the identified trends may not in fact supply the expected opportunities for native species establishment. In order to facilitate the establishment of native species and better manage reclamation vegetation development, the author recommended that a conifer overstory be established to increase native richness and native cover, and that more appropriate seeding mixes be developed as certain agronomic species are detrimental to long-term goals. The author also recommended that site-specific seed mixes be developed according to end land-use goals, that a planting program for native plants and shrubs be developed, and that a monitoring program be established to better inform future reclamation efforts. The recommendations were designed to bring reclamation efforts into line with reclamation goals. 12 refs., 4 tabs., 2 figs.

  14. Comparison of Travel-Time and Amplitude Measurements for Deep-Focusing Time-Distance Helioseismology

    Science.gov (United States)

    Pourabdian, Majid; Fournier, Damien; Gizon, Laurent

    2018-04-01

    The purpose of deep-focusing time-distance helioseismology is to construct seismic measurements that have a high sensitivity to the physical conditions at a desired target point in the solar interior. With this technique, pairs of points on the solar surface are chosen such that acoustic ray paths intersect at this target (focus) point. Considering acoustic waves in a homogeneous medium, we compare travel-time and amplitude measurements extracted from the deep-focusing cross-covariance functions. Using a single-scattering approximation, we find that the spatial sensitivity of deep-focusing travel times to sound-speed perturbations is zero at the target location and maximum in a surrounding shell. This is unlike the deep-focusing amplitude measurements, which have maximum sensitivity at the target point. We compare the signal-to-noise ratio for travel-time and amplitude measurements for different types of sound-speed perturbations, under the assumption that noise is solely due to the random excitation of the waves. We find that, for highly localized perturbations in sound speed, the signal-to-noise ratio is higher for amplitude measurements than for travel-time measurements. We conclude that amplitude measurements are a useful complement to travel-time measurements in time-distance helioseismology.

  15. Shot- and angle-domain wave-equation traveltime inversion of reflection data: Theory

    KAUST Repository

    Zhang, Sanzong

    2015-05-26

    The main difficulty with iterative waveform inversion is that it tends to get stuck in local minima associated with the waveform misfit function. To mitigate this problem and avoid the need to fit amplitudes in the data, we have developed a wave-equation method that inverts the traveltimes of reflection events, and so it is less prone to the local minima problem. Instead of a waveform misfit function, the penalty function was a crosscorrelation of the downgoing direct wave and the upgoing reflection wave at the trial image point. The time lag, which maximized the crosscorrelation amplitude, represented the reflection-traveltime residual (RTR) that was back projected along the reflection wavepath to update the velocity. Shot- and angle-domain crosscorrelation functions were introduced to estimate the RTR by semblance analysis and scanning. In theory, only the traveltime information was inverted and there was no need to precisely fit the amplitudes or assume a high-frequency approximation. Results with synthetic data and field records revealed the benefits and limitations of wave-equation reflection traveltime inversion.

  16. Three-dimensional sensitivity kernels for finite-frequency traveltimes: the banana-doughnut paradox

    NARCIS (Netherlands)

    Marquering, H.; Dahlen, F. A.; Nolet, G.

    1999-01-01

    We use a coupled surface wave version of the Born approximation to compute the 3-D sensitivity kernel K-T(r) of a seismic body wave traveltime T measured by crosscorrelation of a broad-band waveform with a spherical earth synthetic seismogram. The geometry of a teleseismic S wave kernel is, at first

  17. Estimating Reaction Rate Coefficients Within a Travel-Time Modeling Framework

    Energy Technology Data Exchange (ETDEWEB)

    Gong, R [Georgia Institute of Technology; Lu, C [Georgia Institute of Technology; Luo, Jian [Georgia Institute of Technology; Wu, Wei-min [Stanford University; Cheng, H. [Stanford University; Criddle, Craig [Stanford University; Kitanidis, Peter K. [Stanford University; Gu, Baohua [ORNL; Watson, David B [ORNL; Jardine, Philip M [ORNL; Brooks, Scott C [ORNL

    2011-03-01

    A generalized, efficient, and practical approach based on the travel-time modeling framework is developed to estimate in situ reaction rate coefficients for groundwater remediation in heterogeneous aquifers. The required information for this approach can be obtained by conducting tracer tests with injection of a mixture of conservative and reactive tracers and measurements of both breakthrough curves (BTCs). The conservative BTC is used to infer the travel-time distribution from the injection point to the observation point. For advection-dominant reactive transport with well-mixed reactive species and a constant travel-time distribution, the reactive BTC is obtained by integrating the solutions to advective-reactive transport over the entire travel-time distribution, and then is used in optimization to determine the in situ reaction rate coefficients. By directly working on the conservative and reactive BTCs, this approach avoids costly aquifer characterization and improves the estimation for transport in heterogeneous aquifers which may not be sufficiently described by traditional mechanistic transport models with constant transport parameters. Simplified schemes are proposed for reactive transport with zero-, first-, nth-order, and Michaelis-Menten reactions. The proposed approach is validated by a reactive transport case in a two-dimensional synthetic heterogeneous aquifer and a field-scale bioremediation experiment conducted at Oak Ridge, Tennessee. The field application indicates that ethanol degradation for U(VI)-bioremediation is better approximated by zero-order reaction kinetics than first-order reaction kinetics.

  18. High Frequency Asymptotic Methods for Traveltimes and Anisotropy Parameter Estimation in Azimuthally Varying Media

    KAUST Repository

    Masmoudi, Nabil

    2014-01-01

    of characteristics which yields the ray tracing equations and the finite difference approaches. In the first part of the Master Thesis, we use the ray tracing method to solve the eikonal equation to get P-waves traveltimes for orthorhombic models with arbitrary

  19. Parsimonious wave-equation travel-time inversion for refraction waves

    KAUST Repository

    Fu, Lei

    2017-02-14

    We present a parsimonious wave-equation travel-time inversion technique for refraction waves. A dense virtual refraction dataset can be generated from just two reciprocal shot gathers for the sources at the endpoints of the survey line, with N geophones evenly deployed along the line. These two reciprocal shots contain approximately 2N refraction travel times, which can be spawned into O(N2) refraction travel times by an interferometric transformation. Then, these virtual refraction travel times are used with a source wavelet to create N virtual refraction shot gathers, which are the input data for wave-equation travel-time inversion. Numerical results show that the parsimonious wave-equation travel-time tomogram has about the same accuracy as the tomogram computed by standard wave-equation travel-time inversion. The most significant benefit is that a reciprocal survey is far less time consuming than the standard refraction survey where a source is excited at each geophone location.

  20. Shot- and angle-domain wave-equation traveltime inversion of reflection data: Theory

    KAUST Repository

    Zhang, Sanzong; Luo, Yi; Schuster, Gerard T.

    2015-01-01

    The main difficulty with iterative waveform inversion is that it tends to get stuck in local minima associated with the waveform misfit function. To mitigate this problem and avoid the need to fit amplitudes in the data, we have developed a wave-equation method that inverts the traveltimes of reflection events, and so it is less prone to the local minima problem. Instead of a waveform misfit function, the penalty function was a crosscorrelation of the downgoing direct wave and the upgoing reflection wave at the trial image point. The time lag, which maximized the crosscorrelation amplitude, represented the reflection-traveltime residual (RTR) that was back projected along the reflection wavepath to update the velocity. Shot- and angle-domain crosscorrelation functions were introduced to estimate the RTR by semblance analysis and scanning. In theory, only the traveltime information was inverted and there was no need to precisely fit the amplitudes or assume a high-frequency approximation. Results with synthetic data and field records revealed the benefits and limitations of wave-equation reflection traveltime inversion.

  1. Angle-domain Migration Velocity Analysis using Wave-equation Reflection Traveltime Inversion

    KAUST Repository

    Zhang, Sanzong

    2012-11-04

    The main difficulty with an iterative waveform inversion is that it tends to get stuck in a local minima associated with the waveform misfit function. This is because the waveform misfit function is highly non-linear with respect to changes in the velocity model. To reduce this nonlinearity, we present a reflection traveltime tomography method based on the wave equation which enjoys a more quasi-linear relationship between the model and the data. A local crosscorrelation of the windowed downgoing direct wave and the upgoing reflection wave at the image point yields the lag time that maximizes the correlation. This lag time represents the reflection traveltime residual that is back-projected into the earth model to update the velocity in the same way as wave-equation transmission traveltime inversion. The residual movemout analysis in the angle-domain common image gathers provides a robust estimate of the depth residual which is converted to the reflection traveltime residual for the velocity inversion. We present numerical examples to demonstrate its efficiency in inverting seismic data for complex velocity model.

  2. Prestack first-break traveltime tomography using the double-square-root eikonal equation

    KAUST Repository

    Li, Siwei; Fomel, Sergey; Vladimirsky, Alexander

    2012-01-01

    -square-root (DSR) eikonal equation that describes the whole survey, while providing the same first-arrival travel-times, allows not only the receivers but also the shots to change position and therefore leads to faster convergence in tomo-graphic inversion. The DSR

  3. Parsimonious wave-equation travel-time inversion for refraction waves

    KAUST Repository

    Fu, Lei; Hanafy, Sherif M.; Schuster, Gerard T.

    2017-01-01

    We present a parsimonious wave-equation travel-time inversion technique for refraction waves. A dense virtual refraction dataset can be generated from just two reciprocal shot gathers for the sources at the endpoints of the survey line, with N

  4. A new 3-D ray tracing method based on LTI using successive partitioning of cell interfaces and traveltime gradients

    Science.gov (United States)

    Zhang, Dong; Zhang, Ting-Ting; Zhang, Xiao-Lei; Yang, Yan; Hu, Ying; Qin, Qian-Qing

    2013-05-01

    We present a new method of three-dimensional (3-D) seismic ray tracing, based on an improvement to the linear traveltime interpolation (LTI) ray tracing algorithm. This new technique involves two separate steps. The first involves a forward calculation based on the LTI method and the dynamic successive partitioning scheme, which is applied to calculate traveltimes on cell boundaries and assumes a wavefront that expands from the source to all grid nodes in the computational domain. We locate several dynamic successive partition points on a cell's surface, the traveltimes of which can be calculated by linear interpolation between the vertices of the cell's boundary. The second is a backward step that uses Fermat's principle and the fact that the ray path is always perpendicular to the wavefront and follows the negative traveltime gradient. In this process, the first-arriving ray path can be traced from the receiver to the source along the negative traveltime gradient, which can be calculated by reconstructing the continuous traveltime field with cubic B-spline interpolation. This new 3-D ray tracing method is compared with the LTI method and the shortest path method (SPM) through a number of numerical experiments. These comparisons show obvious improvements to computed traveltimes and ray paths, both in precision and computational efficiency.

  5. 2-D traveltime and waveform inversion for improved seismic imaging: Naga Thrust and Fold Belt, India

    Science.gov (United States)

    Jaiswal, Priyank; Zelt, Colin A.; Bally, Albert W.; Dasgupta, Rahul

    2008-05-01

    Exploration along the Naga Thrust and Fold Belt in the Assam province of Northeast India encounters geological as well as logistic challenges. Drilling for hydrocarbons, traditionally guided by surface manifestations of the Naga thrust fault, faces additional challenges in the northeast where the thrust fault gradually deepens leaving subtle surface expressions. In such an area, multichannel 2-D seismic data were collected along a line perpendicular to the trend of the thrust belt. The data have a moderate signal-to-noise ratio and suffer from ground roll and other acquisition-related noise. In addition to data quality, the complex geology of the thrust belt limits the ability of conventional seismic processing to yield a reliable velocity model which in turn leads to poor subsurface image. In this paper, we demonstrate the application of traveltime and waveform inversion as supplements to conventional seismic imaging and interpretation processes. Both traveltime and waveform inversion utilize the first arrivals that are typically discarded during conventional seismic processing. As a first step, a smooth velocity model with long wavelength characteristics of the subsurface is estimated through inversion of the first-arrival traveltimes. This velocity model is then used to obtain a Kirchhoff pre-stack depth-migrated image which in turn is used for the interpretation of the fault. Waveform inversion is applied to the central part of the seismic line to a depth of ~1 km where the quality of the migrated image is poor. Waveform inversion is performed in the frequency domain over a series of iterations, proceeding from low to high frequency (11-19 Hz) using the velocity model from traveltime inversion as the starting model. In the end, the pre-stack depth-migrated image and the waveform inversion model are jointly interpreted. This study demonstrates that a combination of traveltime and waveform inversion with Kirchhoff pre-stack depth migration is a promising approach

  6. Two-point paraxial traveltime formula for inhomogeneous isotropic and anisotropic media: Tests of accuracy

    KAUST Repository

    Waheed, Umair bin; Psencik, Ivan; Cerveny, Vlastislav; Iversen, Einar; Alkhalifah, Tariq Ali

    2013-01-01

    On several simple models of isotropic and anisotropic media, we have studied the accuracy of the two-point paraxial traveltime formula designed for the approximate calculation of the traveltime between points S' and R' located in the vicinity of points S and R on a reference ray. The reference ray may be situated in a 3D inhomogeneous isotropic or anisotropic medium with or without smooth curved interfaces. The twopoint paraxial traveltime formula has the form of the Taylor expansion of the two-point traveltime with respect to spatial Cartesian coordinates up to quadratic terms at points S and R on the reference ray. The constant term and the coefficients of the linear and quadratic terms are determined from quantities obtained from ray tracing and linear dynamic ray tracing along the reference ray. The use of linear dynamic ray tracing allows the evaluation of the quadratic terms in arbitrarily inhomogeneous media and, as shown by examples, it extends the region of accurate results around the reference ray between S and R (and even outside this interval) obtained with the linear terms only. Although the formula may be used for very general 3D models, we concentrated on simple 2D models of smoothly inhomogeneous isotropic and anisotropic (~8% and ~20% anisotropy) media only. On tests, in which we estimated twopoint traveltimes between a shifted source and a system of shifted receivers, we found that the formula may yield more accurate results than the numerical solution of an eikonal-based differential equation. The tests also indicated that the accuracy of the formula depends primarily on the length and the curvature of the reference ray and only weakly depends on anisotropy. The greater is the curvature of the reference ray, the narrower its vicinity, in which the formula yields accurate results.

  7. Two-point paraxial traveltime formula for inhomogeneous isotropic and anisotropic media: Tests of accuracy

    KAUST Repository

    Waheed, Umair bin

    2013-09-01

    On several simple models of isotropic and anisotropic media, we have studied the accuracy of the two-point paraxial traveltime formula designed for the approximate calculation of the traveltime between points S\\' and R\\' located in the vicinity of points S and R on a reference ray. The reference ray may be situated in a 3D inhomogeneous isotropic or anisotropic medium with or without smooth curved interfaces. The twopoint paraxial traveltime formula has the form of the Taylor expansion of the two-point traveltime with respect to spatial Cartesian coordinates up to quadratic terms at points S and R on the reference ray. The constant term and the coefficients of the linear and quadratic terms are determined from quantities obtained from ray tracing and linear dynamic ray tracing along the reference ray. The use of linear dynamic ray tracing allows the evaluation of the quadratic terms in arbitrarily inhomogeneous media and, as shown by examples, it extends the region of accurate results around the reference ray between S and R (and even outside this interval) obtained with the linear terms only. Although the formula may be used for very general 3D models, we concentrated on simple 2D models of smoothly inhomogeneous isotropic and anisotropic (~8% and ~20% anisotropy) media only. On tests, in which we estimated twopoint traveltimes between a shifted source and a system of shifted receivers, we found that the formula may yield more accurate results than the numerical solution of an eikonal-based differential equation. The tests also indicated that the accuracy of the formula depends primarily on the length and the curvature of the reference ray and only weakly depends on anisotropy. The greater is the curvature of the reference ray, the narrower its vicinity, in which the formula yields accurate results.

  8. Proceedings of the 2008 Atlantic Reclamation conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This annual event served as a forum to share information, advance knowledge, raise awareness and examine problems and solutions in the many areas of land and waterway reclamation, restoration and rehabilitation. Given the long history of resource and industrial development in Atlantic Canada, many communities are faced with the challenge of restoring contaminated sites, brownfields, and abandoned mines sites, including both underground and surface coal mines. The topics discussed at this conference ranged from mine site reclamation, brownfield redevelopment, contaminated site restoration, erosion and sediment control planning, revegetation planning, wetland and soil quality research, landuse planning, landscape design, policy, regulation and fiscal planning, environmental risk and liability insurance policies. The conference featured 14 presentations, of which 4 have been catalogued separately for inclusion in this database. tabs., figs.

  9. Reclamation of the mining areas by Nuclemon

    International Nuclear Information System (INIS)

    Torezan, M.J.

    1987-01-01

    This work refers to the reclamation of mine land, fundamental condition to the preservation of the environment. The NUCLEMON - ''Nuclebras de Monazita e Associadas Ltda is dedicated to prospecting activities, exploration, exploitation and industrialization of heavy minerals, ilmenite, monazite, zirconite and rutil. The process of reclamation of the areas starts at the same tinic as the exploitation. The excavation isn't made with explosives, also durung emission doesn't occur. The drainning of pit is made by the pumping of wather for the pits rehabilitation, avoiding the pumping of the surrounding. At the completation of the exploitation restarts the agricultural activity al-ready existing in the area. Sometimes the owner of the soil prefers to preserve some of the pits for the formation of small lakes for the use of wild focal. (C.D.G.) [pt

  10. Reclamation of nuclear contaminated urban areas

    International Nuclear Information System (INIS)

    Roed, J.; Andersson, Kasper; Sandalls, J.

    1991-01-01

    From a knowledge of the distribution and levels of gamma-ray emitting radionuclides on urban surfaces, the dose rate at various locations in an urban complex can be calculated. The information produced provides a quantitative guide of where decontamination would be of greatest benefit in terms of dose reduction. The efficiency and cost of practicable reclamation and decontamination procedures has been considered and, combined with dose rate calculations before and after treatment, a strategy for reclamation of various urban contamination scenarios has been developed. The study has shown that decontamination of green areas and streets is relatively highly cost-effective in terms of dose reduction and would rank highly in a list of priorities. Roofs are shown to make a significant contribution to dose rate but decontamination of roofs is difficult and not highly cost-effective. Decontamination of walls would rank lowly in a list of priorities, since they represent large areas carrying very little contamination. (3 refs., 4 tabs.)

  11. Field manual for reclamation of salt contaminated soils

    International Nuclear Information System (INIS)

    Burley, M.J.; Lesky, M.; Warren, R.J.

    1988-01-01

    Saltwater is often produced with crude oil and must be separated from it at a processing facility prior to deep-well injection. Increasing volumes of saltwater have led to pipeline corrosion and an increasing frequency of saltwater spills. A field manual for treating saltwater-contaminated soil was prepared by the Production Research Department of Esso Resources Canada Limited and Husky Oil Operations Limited. The purpose of the manual is to provide field and plant operations with a practical guide for reclaiming brine spills on mineral (agricultural) soil. The manual covers background scientific theory about how saltwater affects the soil, initial steps for treating new spills, site assessment, and reclamation program design, implementation and monitoring. A sample spill site assessment form is included. 8 refs

  12. Reclamation of a uraniferous lignite mine, North Dakota: summary paper

    International Nuclear Information System (INIS)

    Houghton, R.L.; Hall, R.L.; Unseth, J.D.; Wald, J.D.; Burgess, J.L.; Patrick, D.P.; Anderson, G.S.; Hill, S.R.

    1987-01-01

    Uraniferous lignite deposits were mined from 1955 to 1967 by surface mining techniques. Overburden was stripped, and the lignite was burned to concentrate the uranium in its ash. Uranium salts in the overburden gave exposure levels of as much as 500 microroentgens/hour; water in mine pits had U concentrations from 12 to 19,000 micrograms/liter. Reclamation involved replacing the spoils into the source pit, the most contaminated spoils being placed above the water table, capping the pit with clay then topsoil containing lesser concentrations of radioactive elements, and finally planting with prairie grass. Resulting concentrations of radionuclides are given. The land is expected to remain as prairie for wildlife use, but it is safe enough for domestic animals as well. 3 figures

  13. Comparative study of German and Greek lignite mine reclamation

    International Nuclear Information System (INIS)

    Dietrich, N.L.

    1994-01-01

    The reclamation planning of three European lignite mining districts are compared: amount and extent of planning, integration with mining operations, and results. The districts are: Rheinbraun (Cologne), Leipzig-Borna (''East'' Germany), and Megalopolis (Greece). Lignite mines were visited and mining and reclamation personnel interviewed. The Rheinbraun mines have the most thorough reclamation operations. The integrated mine and reclamation operations are world class in size, scope, and detail of reclamation. A comprehensive landscape and reclamation plan is required in the mine permitting process. The Leipzig-Borna district is the second largest of the districts, studied little pre-mining planning of the post-mining landscape or land uses was evident. Reclamation is not closely integrated with the mining and typically occurs many years after the mining. Reduced lignite production since German reunification has left vast areas of disturbed land with little mining; and no funding for the reclamation of the large areas of mined land reclamation. The Greek Megalopolis mines have mine operations plan, but with no integrated reclamation planning. The initial spoil pile was reclaimed according to the original German mining plan. No pits have been reclaimed, and spoil areas are revegetated sporadically. The Rheinbraun mining operations Cologne which include a post mining landscape/land use plan have integrated and timely reclamation operations. The other two mining operations, which do not have a comprehensive and detailed reclamation and landscape/land use plans, do not integrate reclamation operations with the mining operations. The results are large areas of mined land unreclaimed for many years

  14. Risk-based optimization of land reclamation

    International Nuclear Information System (INIS)

    Lendering, K.T.; Jonkman, S.N.; Gelder, P.H.A.J.M. van; Peters, D.J.

    2015-01-01

    Large-scale land reclamations are generally constructed by means of a landfill well above mean sea level. This can be costly in areas where good quality fill material is scarce. An alternative to save materials and costs is a ‘polder terminal’. The quay wall acts as a flood defense and the terminal level is well below the level of the quay wall. Compared with a conventional terminal, the costs are lower, but an additional flood risk is introduced. In this paper, a risk-based optimization is developed for a conventional and a polder terminal. It considers the investment and residual flood risk. The method takes into account both the quay wall and terminal level, which determine the probability and damage of flooding. The optimal quay wall level is found by solving a Lambert function numerically. The terminal level is bounded by engineering boundary conditions, i.e. piping and uplift of the cover layer of the terminal yard. It is found that, for a representative case study, the saving of reclamation costs for a polder terminal is larger than the increase of flood risk. The model is applicable to other cases of land reclamation and to similar optimization problems in flood risk management. - Highlights: • A polder terminal can be an attractive alternative for a conventional terminal. • A polder terminal is feasible at locations with high reclamation cost. • A risk-based approach is required to determine the optimal protection levels. • The depth of the polder terminal yard is bounded by uplifting of the cover layer. • This paper can support decisions regarding alternatives for port expansions.

  15. Land reclamation program annual report, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, J. R.; Carter, R. P.; Cleaves, D. T.

    1979-07-01

    The Argonne Land Reclamation Program, sponsored by the United States Department of Energy's Assistant Secretary for Environment, is a joint effort of two Argonne divisions: Energy and Environmental Systems and Environmental Impact Studies. The program is carried out by a multidisciplinary team of scientists and engineers, and has three primary objectives: (1) to develop energy-efficient and cost-effective mining and reclamation techniques; (2) to assist industry in evaluating the applicability of regulations and demonstrating techniques to meet regulations; and (3) to supply data and evaluation techniques to decisionmakers concerned with trade-offs between energy development and environmental quality. Six integrated field research sites have been established to address problems associated with surface mining operations. This program relies heavily on input from industry and has developed excellent working arrangements with coal companies at each of the current mining sites. A major area of interest is the development of a computerized system to store and manage data gathered by the research staff. The Land Reclamation Program assigns the highest priority to the transfer to users of information generated by its research.

  16. Optimisation of reclamation approaches to land affected by surface coal mining

    Energy Technology Data Exchange (ETDEWEB)

    Kabrna, M.; Hendrychova, M. [Vyzkumny ustav pro hnede uhli a.s. (Czech Republic); Czech Univ. of Life Sciences, Prague (Czech Republic). Faculty of Environmental Science; Salek, M. [Czech Univ. of Life Sciences, Prague (Czech Republic). Faculty of Environmental Science; Rehor, M. [Vyzkumny ustav pro hnede uhli a.s. (Czech Republic)

    2009-07-01

    Since the 1950s, reclamation of land affected by brown coal mining in the Czech Republic has been conducted. Since this time, there has been significant improvement in quality development of reclamation measures. This paper discussed the results of different studies where technically reclaimed sites as well as naturally developed sites were investigated. The paper discussed the methodology of the study as well as results of succession versus reclamation and next preferences. One of the studies that was examined involved four groups of animals that have a close relation to soil and plant vegetation. These included ground beetles, bugs, molluscs, and birds. This study found that the spontaneously developed sites could be characterized by the same or a higher biodiversity than those technically reclaimed. The second study examined bird nest preferences either to domestic or to exotic trees. The results showed that although exotic trees dominate on reclaimed sites, the birds preferred the domestic trees for nesting. It was concluded that the natural succession could play a significant role within reclamation practices, particularly on those sites where higher species diversity is desirable. 10 refs., 2 figs.

  17. Decontamination and functional reclamation of dredged brackish sediments.

    Science.gov (United States)

    Doni, S; Macci, C; Peruzzi, E; Iannelli, R; Ceccanti, B; Masciandaro, G

    2013-07-01

    The continuous stream of sediments, dredged from harbors and waterways for keeping shipping traffic efficiency, is a considerable ongoing problem recognized worldwide. This problem gets worse as most of the sediments dredged from commercial ports and waterways turn out to be polluted by a wide range of organic and inorganic contaminants. In this study, phytoremediation was explored as a sustainable reclamation technology for turning slightly-polluted brackish dredged sediments into a matrix feasible for productive use. To test this possibility, a phytoremediation experimentation was carried out in containers of about 0.7 m(3) each, filled with brackish dredged sediments contaminated by heavy metals and hydrocarbons. The sediments were pre-conditioned by adding an agronomic soil (30 % v/v) to improve their clayey granulometric composition, and by topping the mixture with high quality compost (4 kg m(-2)) to favour the initial adaptation of the selected vegetal species. The following plant treatments were tested: (1) Paspalum vaginatum, (2) Phragmites australis, (3) Spartium junceum + P. vaginatum, (4) Nerium oleander + P. vaginatum, (5) Tamarix gallica + P. vaginatum, and (6) unplanted control. Eighteen months after the beginning of the experimentation, all the plant species were found in healthy condition and well developed. Throughout the whole experiment, the monitored biological parameters (total microbial population and dehydrogenase activity) were generally observed as constantly increasing in all the planted sediments more than in the control, pointing out an improvement of the chemico-physical conditions of both microorganisms and plants. The concentration decrease of organic and inorganic contaminants (>35 and 20 %, respectively) in the treatments with plants, particularly in the T. gallica + P. vaginatum, confirmed the importance of the root-microorganism interaction in activating the decontamination processes. Finally, the healthy state of

  18. Staunton 1 Reclamation Demonstration Project. Progress report for 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-12-01

    The Staunton 1 Reclamation Demonstration Project involves an evaluation of the reclamation process for a deep coal mine refuse system. A typical abandoned midwestern deep coal mine refuse site was selected, final land use was determined, baseline data were collected, engineering plans were developed and implemented, and a post-construction evaluation was begun. The project is a cooperative effort by two state agencies--the Abandoned Mined Land Reclamation Council of Illinois the Illinois Institute for Environmental Quality--and the U.S. Department of Energy through the Land Reclamation Program at Argonne National Laboratory. Current investigations are monitoring groundwater, surface water quality, aquatic ecosystems, revegetation, soil characteristics, erosion and runoff, soil microbial and soil fauna populations, wildlife, and economic effects of the reclamation effort. The research is a multidisciplinary approach to the concept of ecosystem response to reclamation.

  19. Workflow for near-surface velocity automatic estimation: Source-domain full-traveltime inversion followed by waveform inversion

    KAUST Repository

    Liu, Lu; Fei, Tong; Luo, Yi; Guo, Bowen

    2017-01-01

    This paper presents a workflow for near-surface velocity automatic estimation using the early arrivals of seismic data. This workflow comprises two methods, source-domain full traveltime inversion (FTI) and early-arrival waveform inversion. Source

  20. Value of travel-time reliability : commuters' route-choice behavior in the Twin Cities, phase 2.

    Science.gov (United States)

    2012-04-01

    Travel-time variability is a noteworthy factor in network performance. It measures the temporal uncertainty : experienced by users in their movement between any two nodes in a network. The importance : of the time variance depends on the penalties in...

  1. Used Furan Sand Reclamation in REGMAS Vibratory Unit

    Directory of Open Access Journals (Sweden)

    Dańko J.

    2015-09-01

    Full Text Available The paper, especially dealt with problems of reclamation of used furan sand, carried out in new, vibratory sand reclamation unit REGMAS developed by researches from AGH-University of Science and Technology, Faculty of Foundry Engineering in Cracow (Poland. Functional characteristics of reclamation unit as well as the results of reclamation of used sand with furfuryl resin are discussed in the paper. The quality of reclaim was tested by means of the LOI and pH value, dust content in the reclaim and at least by the the quality of the castings produced in moulds prepared with the use of reclaimed matrix.

  2. The reclamation program for the Yucca Mountain Project

    International Nuclear Information System (INIS)

    Ostler, W.K.; O'Farrell, T.P.; Winkel, V.K.; Schultz, B.W.

    1991-01-01

    The US Department of Energy (DOE) is required by law and other regulatory requirements to reclaim disturbances created by site characterization activities at Yucca Mountain. Because of the difficulty of reclaiming arid areas and the lack of site specific information on successful reclamation techniques and procedures, the DOE has developed a comprehensive reclamation program. The program consists of three phases: planning, operational and research. The planning phase is a continuing process that ensures that program policy, goals, tasks and responsibilities are clearly identified and linked. The operational phase uses best available knowledge to develop and implement reclamation plans that are site-specific for each disturbance. Reclamation activities start prior to any surface disturbance with a survey of each disturbance by trained scientists. The scientists survey the area for the presence of protected species or critical wildlife habitat. They also gather vegetation, landscape, soils and other environmental data that is used to assess the impact of the proposed disturbance. Recommendations can be made to either avoid areas or mitigate impacts. The operational phase includes interim reclamation to protect valuable resources and control erosion prior to final reclamation. Monitoring of reclaimed sites is conducted to correct problem areas and insure that reclamation objectives are achieved. The third phase of the reclamation program is designed to provide site-specific information on effective reclamation techniques through research and field demonstrations. 52 refs., 1 tab

  3. Diet of desert tortoises at Yucca Mountain, Nevada, and implications for habitat reclamation

    International Nuclear Information System (INIS)

    Rakestraw, D.L.; Holt, E.A.; Rautenstrauch, K.R.

    1995-12-01

    The diet of desert tortoises at Yucca Mountain was assessed during 1992 to 1995 using a combination of feeding observations and scat analysis. Feeding observation data (1993 through 1995) showed that tortoises fed on a wide variety of items. The most frequently eaten items were forbs and annual grasses. These two forage groups comprised more than 90% of all bites taken. Analysis of scat (1992 and 1993) also showed that grasses and forbs were the most common groups, making up more than 80% of the composition of scat. Yearly differences between proportions of species in the diet were observed and were most likely attributable to differences in plant productivity, which is linked to rainfall patterns. Non-native species were an important component of the diet in all years, accounting for 13 to 50% of all bites observed and 6 to 24% of scat contents. A list of all items encountered in the diet is provided. To facilitate reclamation of desert tortoise habitat disturbed by the Yucca Mountain Site Characterization Project, native forage species that should be included in reclamation seed mixes, when feasible, were identified. Although shrubs make up only a small proportion of the diet, they should also be included in reclamation efforts because they provide habitat structure. Tortoise cover sites, and microhabitats amenable to seed germination and seedling establishment. In addition, non-native species should not be planted on reclaimed sites and, if necessary, sites should be recontoured and soil compaction reduced prior to planting

  4. Prestack first-break traveltime tomography using the double-square-root eikonal equation

    KAUST Repository

    Li, Siwei

    2012-09-01

    Traveltime tomography with shot-based eikonal equation fixes shot positions then relies on inversion to resolve any contradicting information between independent shots and achieve a possible cost-function minimum. On the other hand, the double-square-root (DSR) eikonal equation that describes the whole survey, while providing the same first-arrival travel-times, allows not only the receivers but also the shots to change position and therefore leads to faster convergence in tomo-graphic inversion. The DSR eikonal equation can be solved by a version of the fast-marching method (FMM) with special treatment for its singularity at horizontally traveling waves. For inversion, we use an upwind finite-difference scheme and the adjoint-state method to avoid explicit calculation of Fréchet derivatives. The proposed method generalizes to the 3D case straightforwardly.

  5. Gradient for the acoustic VTI full waveform inversion based on the instantaneous traveltime sensitivity kernels

    KAUST Repository

    Djebbi, Ramzi

    2015-08-19

    The instantaneous traveltime is able to reduce the non-linearity of full waveform inversion (FWI) that originates from the wrapping of the phase. However, the adjoint state method in this case requires a total of 5 modeling calculations to compute the gradient. Also, considering the larger modeling cost for anisotropic wavefield extrapolation and the necessity to use a line-search algorithm to estimate a step length that depends on the parameters scale, we propose to calculate the gradient based on the instantaneous traveltime sensitivity kernels. We, specifically, use the sensitivity kernels computed using dynamic ray-tracing to build the gradient. The resulting update is computed using a matrix decomposition and accordingly the computational cost is reduced. We consider a simple example where an anomaly is embedded into a constant background medium and we compute the update for the VTI wave equation parameterized using vh, η and ε.

  6. Diffraction Traveltime Approximation to Estimate Anisotropy Parameters in Complex TI Media

    KAUST Repository

    Waheed, Umair bin

    2013-05-01

    Diffracted waves carry valuable information that can help improve our velocity modeling capability for better imaging of the subsurface. They are especially useful for anisotropic media as they inherently possess a wide range of dips necessary to resolve the angular dependence of velocity. We develop a scheme for diffraction traveltime computations based on perturbation theory for transverse isotropic media with tilted axis of symmetry (TTI). The formulation has advantages on two fronts: firstly it alleviates the computational complexity associated with solving the TTI eikonal equation and secondly it provides a mechanism to scan for the best fit anellipticity parameter without the need for repetitive modeling of traveltimes. The accuracy of such an expansion is further enhanced by the use of Shanks transform. We establish the effectiveness of the proposed formulation with tests on a homogeneous TTI model and the BP TTI model.

  7. Gradient for the acoustic VTI full waveform inversion based on the instantaneous traveltime sensitivity kernels

    KAUST Repository

    Djebbi, Ramzi; Alkhalifah, Tariq Ali

    2015-01-01

    The instantaneous traveltime is able to reduce the non-linearity of full waveform inversion (FWI) that originates from the wrapping of the phase. However, the adjoint state method in this case requires a total of 5 modeling calculations to compute the gradient. Also, considering the larger modeling cost for anisotropic wavefield extrapolation and the necessity to use a line-search algorithm to estimate a step length that depends on the parameters scale, we propose to calculate the gradient based on the instantaneous traveltime sensitivity kernels. We, specifically, use the sensitivity kernels computed using dynamic ray-tracing to build the gradient. The resulting update is computed using a matrix decomposition and accordingly the computational cost is reduced. We consider a simple example where an anomaly is embedded into a constant background medium and we compute the update for the VTI wave equation parameterized using vh, η and ε.

  8. Viscoacoustic wave-equation traveltime inversion with correct and incorrect attenuation profiles

    KAUST Repository

    Yu, Han

    2017-08-17

    A visco-acoustic wave-equation traveltime inversion method is presented that inverts for a shallow subsurface velocity distribution with correct and incorrect attenuation profiles. Similar to the classical wave equation traveltime inversion, this method applies the misfit functional that minimizes the first break differences between the observed and predicted data. Although, WT can partly avoid the cycle skipping problem, an initial velocity model approaches to the right or wrong velocity models under different setups of the attenuation profiles. However, with a Q model far away from the real model, the inverted tomogram is obviously different from the true velocity model while a small change of the Q model does not improve the inversion quality in a strong manner if low frequency information is not lost.

  9. The Effect of Ignoring Earth Curvature on Near-Regional Traveltime Tomography and Earthquake Hypocentral Determination

    Science.gov (United States)

    Bai, Chao-ying; Li, Xing-wang; Wang, Di; Greenhalgh, Stewart

    2017-12-01

    Earthquake hypocenter determination and traveltime tomography with local earthquake data are normally conducted using a Cartesian coordinate system and assuming a flat Earth model, but for regional and teleseismic data Earth curvature is incorporated and a spherical coordinate system employed. However, when the study region is from the local to near-regional scale (1°-4°), it is unclear what coordinate system to use and what kind of incorrect anomalies or location errors might arise when using the Cartesian coordinate frame. In this paper we investigate in a quantitative sense through two near-regional crustal models and five different inversion methods, the hypocenter errors, reflector perturbation and incorrect velocity anomalies that can arise due to the selection of the wrong coordinate system and inversion method. The simulated inversion results show that the computed traveltime errors are larger than 0.1 s when the epicentral distance exceeds 150 km, and increases linearly with increasing epicentral distance. Such predicted traveltime errors will result in different patterns of incorrect velocity anomalous structures, a perturbed Moho interface for traveltime tomography and source position which deviate for earthquake locations. The maximum magnitude of a velocity image artifact is larger than 1.0% for an epicentral distance of less than 500 km and is up to 0.9% for epicentral distances of less than 300 km. The earthquake source location error is more than 2.0 km for epicentral distances less than 500 km and is up to 1.5 km for epicentral distances less than 300 km. The Moho depth can be in error by up 1.0 km for epicentral distances of less than 500 km but is less than 0.5 km at distances below 300 km. We suggest that spherical coordinate geometry (or time correction) be used whenever there are ray paths at epicentral distances in excess of 150 km.

  10. 78 FR 8821 - Abandoned Mine Land Reclamation Program; Limited Liability for Noncoal Reclamation by Certified...

    Science.gov (United States)

    2013-02-06

    ... Federal laws. It does not preclude liability for gross negligence or intentional misconduct by a state or... Law 109-432 (the ``2006 amendments'') substantially modified the AML reclamation program in title IV... tribe shall be liable under Federal law for any costs or damages as a result of any action or omitted...

  11. First-arrival traveltime tomography for anisotropic media using the adjoint-state method

    KAUST Repository

    Waheed, Umair bin

    2016-05-27

    Traveltime tomography using transmission data has been widely used for static corrections and for obtaining near-surface models for seismic depth imaging. More recently, it is also being used to build initial models for full-waveform inversion. The classic traveltime tomography approach based on ray tracing has difficulties in handling large data sets arising from current seismic acquisition surveys. Some of these difficulties can be addressed using the adjoint-state method, due to its low memory requirement and numerical efficiency. By coupling the gradient computation to nonlinear optimization, it avoids the need for explicit computation of the Fréchet derivative matrix. Furthermore, its cost is equivalent to twice the solution of the forward-modeling problem, irrespective of the size of the input data. The presence of anisotropy in the subsurface has been well established during the past few decades. The improved seismic images obtained by incorporating anisotropy into the seismic processing workflow justify the effort. However, previous literature on the adjoint-state method has only addressed the isotropic approximation of the subsurface. We have extended the adjoint-state technique for first-arrival traveltime tomography to vertical transversely isotropic (VTI) media. Because δ is weakly resolvable from surface seismic alone, we have developed the mathematical framework and procedure to invert for vNMO and η. Our numerical tests on the VTI SEAM model demonstrate the ability of the algorithm to invert for near-surface model parameters and reveal the accuracy achievable by the algorithm.

  12. Traveltime computation and imaging from rugged topography in 3D TTI media

    Science.gov (United States)

    Liu, Shaoyong; Wang, Huazhong; Yang, Qinyong; Fang, Wubao

    2014-02-01

    Foothill areas with rugged topography are of great potential for oil and gas seismic exploration, but subsurface imaging in these areas is very challenging. Seismic acquisition with larger offset and wider azimuth is necessary for seismic imaging in complex areas. However, the scale anisotropy in this case must be taken into account. To generalize the pre-stack depth migration (PSDM) to 3D transversely isotropic media with vertical symmetry axes (VTI) and tilted symmetry axes (TTI) from rugged topography, a new dynamic programming approach for the first-arrival traveltime computation method is proposed. The first-arrival time on every uniform mesh point is calculated based on Fermat's principle with simple calculus techniques and a systematic mapping scheme. In order to calculate the minimum traveltime, a set of nonlinear equations is solved on each mesh point, where the group velocity is determined by the group angle. Based on the new first-arrival time calculation method, the corresponding PSDM and migration velocity analysis workflow for 3D anisotropic media from rugged surface is developed. Numerical tests demonstrate that the proposed traveltime calculation method is effective in both VTI and TTI media. The migration results for 3D field data show that it is necessary to choose a smooth datum to remove the high wavenumber move-out components for PSDM with rugged topography and take anisotropy into account to achieve better images.

  13. Traveltime computation and imaging from rugged topography in 3D TTI media

    International Nuclear Information System (INIS)

    Liu, Shaoyong; Wang, Huazhong; Yang, Qinyong; Fang, Wubao

    2014-01-01

    Foothill areas with rugged topography are of great potential for oil and gas seismic exploration, but subsurface imaging in these areas is very challenging. Seismic acquisition with larger offset and wider azimuth is necessary for seismic imaging in complex areas. However, the scale anisotropy in this case must be taken into account. To generalize the pre-stack depth migration (PSDM) to 3D transversely isotropic media with vertical symmetry axes (VTI) and tilted symmetry axes (TTI) from rugged topography, a new dynamic programming approach for the first-arrival traveltime computation method is proposed. The first-arrival time on every uniform mesh point is calculated based on Fermat's principle with simple calculus techniques and a systematic mapping scheme. In order to calculate the minimum traveltime, a set of nonlinear equations is solved on each mesh point, where the group velocity is determined by the group angle. Based on the new first-arrival time calculation method, the corresponding PSDM and migration velocity analysis workflow for 3D anisotropic media from rugged surface is developed. Numerical tests demonstrate that the proposed traveltime calculation method is effective in both VTI and TTI media. The migration results for 3D field data show that it is necessary to choose a smooth datum to remove the high wavenumber move-out components for PSDM with rugged topography and take anisotropy into account to achieve better images. (paper)

  14. Finite frequency traveltime sensitivity kernels for acoustic anisotropic media: Angle dependent bananas

    KAUST Repository

    Djebbi, Ramzi

    2013-08-19

    Anisotropy is an inherent character of the Earth subsurface. It should be considered for modeling and inversion. The acoustic VTI wave equation approximates the wave behavior in anisotropic media, and especially it\\'s kinematic characteristics. To analyze which parts of the model would affect the traveltime for anisotropic traveltime inversion methods, especially for wave equation tomography (WET), we drive the sensitivity kernels for anisotropic media using the VTI acoustic wave equation. A Born scattering approximation is first derived using the Fourier domain acoustic wave equation as a function of perturbations in three anisotropy parameters. Using the instantaneous traveltime, which unwraps the phase, we compute the kernels. These kernels resemble those for isotropic media, with the η kernel directionally dependent. They also have a maximum sensitivity along the geometrical ray, which is more realistic compared to the cross-correlation based kernels. Focusing on diving waves, which is used more often, especially recently in waveform inversion, we show sensitivity kernels in anisotropic media for this case.

  15. First-arrival traveltime tomography for anisotropic media using the adjoint-state method

    KAUST Repository

    Waheed, Umair bin; Flagg, Garret; Yarman, Can Evren

    2016-01-01

    Traveltime tomography using transmission data has been widely used for static corrections and for obtaining near-surface models for seismic depth imaging. More recently, it is also being used to build initial models for full-waveform inversion. The classic traveltime tomography approach based on ray tracing has difficulties in handling large data sets arising from current seismic acquisition surveys. Some of these difficulties can be addressed using the adjoint-state method, due to its low memory requirement and numerical efficiency. By coupling the gradient computation to nonlinear optimization, it avoids the need for explicit computation of the Fréchet derivative matrix. Furthermore, its cost is equivalent to twice the solution of the forward-modeling problem, irrespective of the size of the input data. The presence of anisotropy in the subsurface has been well established during the past few decades. The improved seismic images obtained by incorporating anisotropy into the seismic processing workflow justify the effort. However, previous literature on the adjoint-state method has only addressed the isotropic approximation of the subsurface. We have extended the adjoint-state technique for first-arrival traveltime tomography to vertical transversely isotropic (VTI) media. Because δ is weakly resolvable from surface seismic alone, we have developed the mathematical framework and procedure to invert for vNMO and η. Our numerical tests on the VTI SEAM model demonstrate the ability of the algorithm to invert for near-surface model parameters and reveal the accuracy achievable by the algorithm.

  16. Born reflection kernel analysis and wave-equation reflection traveltime inversion in elastic media

    KAUST Repository

    Wang, Tengfei

    2017-08-17

    Elastic reflection waveform inversion (ERWI) utilize the reflections to update the low and intermediate wavenumbers in the deeper part of model. However, ERWI suffers from the cycle-skipping problem due to the objective function of waveform residual. Since traveltime information relates to the background model more linearly, we use the traveltime residuals as objective function to update background velocity model using wave equation reflected traveltime inversion (WERTI). The reflection kernel analysis shows that mode decomposition can suppress the artifacts in gradient calculation. We design a two-step inversion strategy, in which PP reflections are firstly used to invert P wave velocity (Vp), followed by S wave velocity (Vs) inversion with PS reflections. P/S separation of multi-component seismograms and spatial wave mode decomposition can reduce the nonlinearity of inversion effectively by selecting suitable P or S wave subsets for hierarchical inversion. Numerical example of Sigsbee2A model validates the effectiveness of the algorithms and strategies for elastic WERTI (E-WERTI).

  17. Finite frequency traveltime sensitivity kernels for acoustic anisotropic media: Angle dependent bananas

    KAUST Repository

    Djebbi, Ramzi; Alkhalifah, Tariq Ali

    2013-01-01

    Anisotropy is an inherent character of the Earth subsurface. It should be considered for modeling and inversion. The acoustic VTI wave equation approximates the wave behavior in anisotropic media, and especially it's kinematic characteristics. To analyze which parts of the model would affect the traveltime for anisotropic traveltime inversion methods, especially for wave equation tomography (WET), we drive the sensitivity kernels for anisotropic media using the VTI acoustic wave equation. A Born scattering approximation is first derived using the Fourier domain acoustic wave equation as a function of perturbations in three anisotropy parameters. Using the instantaneous traveltime, which unwraps the phase, we compute the kernels. These kernels resemble those for isotropic media, with the η kernel directionally dependent. They also have a maximum sensitivity along the geometrical ray, which is more realistic compared to the cross-correlation based kernels. Focusing on diving waves, which is used more often, especially recently in waveform inversion, we show sensitivity kernels in anisotropic media for this case.

  18. Impact of direct greenhouse gas emissions on the carbon footprint of water reclamation processes employing nitrification-denitrification.

    Science.gov (United States)

    Schneider, Andrew G; Townsend-Small, Amy; Rosso, Diego

    2015-02-01

    Water reclamation has the potential to reduce water supply demands from aquifers and more energy-intensive water production methods (e.g., seawater desalination). However, water reclamation via biological nitrification-denitrification is also associated with the direct emission of the greenhouse gases (GHGs) CO₂, N₂O, and CH₄. We quantified these direct emissions from the nitrification-denitrification reactors of a water reclamation plant in Southern California, and measured the (14)C content of the CO₂ to distinguish between short- and long-lived carbon. The total emissions were 1.5 (±0.2) g-fossil CO₂ m(-3) of wastewater treated, 0.5 (±0.1) g-CO₂-eq of CH₄ m(-3), and 1.8 (±0.5) g-CO₂-eq of N₂O m(-3), for a total of 3.9 (±0.5) g-CO₂-eqm(-3). This demonstrated that water reclamation can be a source of GHGs from long lived carbon, and thus a candidate for GHG reduction credit. From the (14)C measurements, we found that between 11.4% and 15.1% of the CO₂ directly emitted was derived from fossil sources, which challenges past assumptions that the direct CO₂ emissions from water reclamation contain only modern carbon. A comparison of our direct emission measurements with estimates of indirect emissions from several water production methods, however, showed that the direct emissions from water reclamation constitute only a small fraction of the plant's total GHG footprint. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. Renewable Energy Assessment for the Bureau of Reclamation

    Energy Technology Data Exchange (ETDEWEB)

    Haase, S.; Burman, K.; Dahle, D.; Heimiller, D.; Van Geet, O.

    2012-05-01

    Report summarizes the results of an assessment and analysis of renewable energy opportunities conducted for the U.S. Department of Interior, Bureau of Reclamation (Reclamation) by the National Renewable Energy Laboratory (NREL). Report contains results from utility scale analysis and site visits, as well as facility scale screening and site visits.

  20. Agricultural field reclamation utilizing native grass crop production

    Science.gov (United States)

    J. Cure

    2013-01-01

    Developing a method of agricultural field reclamation to native grasses in the Lower San Pedro Watershed could prove to be a valuable tool for educational and practical purposes. Agricultural field reclamation utilizing native grass crop production will address water table depletion, soil degradation and the economic viability of the communities within the watershed....

  1. Facility-Scale Solar Photovoltaic Guidebook: Bureau of Reclamation

    Energy Technology Data Exchange (ETDEWEB)

    Kiatreungwattana, Kosol [National Renewable Energy Lab. (NREL), Golden, CO (United States); VanGeet, Otto [National Renewable Energy Lab. (NREL), Golden, CO (United States); Stoltenberg, Blaise [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-09-01

    This guidebook was written for the U.S. Bureau of Reclamation to explore the use of non-hydro renewable energy resources to meet the U.S. Department of Interior's objectives and Reclamation's mission. This guidebook presents readers with the processes and steps needed to assess and successfully implement facility-scale solar projects.

  2. 30 CFR 784.15 - Reclamation plan: Land use information.

    Science.gov (United States)

    2010-07-01

    .... The narrative shall provide analyses of: (i) The capability of the land before any mining to support a... Section 784.15 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER...

  3. 30 CFR 780.23 - Reclamation plan: Land use information.

    Science.gov (United States)

    2010-07-01

    .... The narrative shall provide analyses of: (i) The capability of the land before any mining to support a... Section 780.23 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER...

  4. Surface mining and land reclamation in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Nephew, E.A.

    1972-05-01

    Mining and land restoration methods as well as planning and regulatory procedures employed in West Germany to ameliorate environmental impacts from large-scale surface mining are described. The Rhineland coalfield in North Rhine Westphalia contains some 55 billion tons of brown-coal (or lignite), making the region one of Europe's most important energy centers. The lignite is extracted from huge, open-pit mines, resulting in large areas of disturbed land. The German reclamation approach is characterized by planning and carrying out the mining process as one continuum from early planning to final restoration of land and its succeeding use. Since the coalfield is located in a populated region with settlements dating back to Roman times, whole villages lying in the path of the mining operations sometimes have to be evacuated and relocated. Even before mining begins, detailed concepts must be worked out for the new landscape which will follow: the topography, the water drainage system, lakes and forests, and the intended land-use pattern are designed and specified in advance. Early, detailed planning makes it possible to coordinate mining and concurrent land reclamation activities. The comprehensive approach permits treating the overall problem as a whole rather than dealing with its separate aspects on a piecemeal basis.

  5. Reclamation of lands transformed by mining activities as an important aspect of environmental protection of the Upper Silesian Coal Basin

    Energy Technology Data Exchange (ETDEWEB)

    Chudek, M; Duchowski, S; Czuber, W

    1976-01-01

    Surface area of lands transformed by coal mining in the basin are analyzed. In 1975 there were 3,110.9 ha of waste lands. Of this, spoil banks dumped on the surface covered 1,019.5 ha, spoil banks located in the cuts of surface mines (e.g. where sand is removed for stowing) or in other subsided places covered 1,064.5 ha, and water reservoirs covered 665.6 ha. Composition of spoil banks produced by black coal mines is analyzed from the point of view of land reclamation. A scheme of reclamation of spoil banks used in the Upper Silesian black coal basin is given. Reclamation of 5 large spoil banks is described. The land reclamation procedure consists in: leveling the spoil bank slopes so that their inclination is 1:10 instead of 1:4. When afforestation is used relatively steep slopes (1:4) are not leveled, centers of endogenic fires are extinguished by packing using rollers, the top layer of a spoil bank is mixed with calcium carbonate (3 to 10 kg/ha), then the top layer of waste fertilized by calcium carbonate is covered with soil (in some cases with fertile soil), soil cover ranges from 15 to 30 cm, the top soil cover is fertilized (dose ranges from 300 to 500 kg/ha). Later lupine is planted and ploughed as additional fertilizer. At a later stage trees and bushes are planted. (10 refs.) (In Polish)

  6. Reclamation of uranium mining and milling disturbances

    International Nuclear Information System (INIS)

    Farmer, E.E.; Schuman, G.E.

    1987-01-01

    Since 1945 the history of uranium mining and milling in the US has been a story of wide fluctuations in market prices and in mining and milling capacity. The late 1960's and the 1970's saw a sizeable reduction in the production of yellowcake because of an earlier over-supply, a leveling off of the military demand, and a failure of the nuclear electric power industry to create the anticipated commercial demand. The decline in the domestic production of yellowcake has continued through the early 1980's to the present. Today, there are five operating uranium mills in the US: one in Wyoming, two in Utah, one in New Mexico, and one in Texas. Of these five mills, three are operating on a reduced schedule, as little as three days a month. A significant portion of the current US production of uranium goes overseas to fulfill Japanese, French, and other European contracts. There is still a sizeable reclamation job to be accomplished on old uranium wastes, both tailings impoundments and overburden embankments. Before the Uranium Mill Tailings Control Act of 1978 (PL 95-604), reclamation was frequently omitted altogether, or else done in a haphazard fashion. We do not know the total area of unreclaimed, radioactive, uranium overburden wastes in the western US, but the area is large, probably several thousand hectares. Fortunately, these overburden wastes are almost entirely located in remote areas. Mill tailings are more difficult to reclaim than overburden, and tailings represent a more serious health hazards. There are approximately 25 million metric tons of unreclaimed uranium mill tailings, with variable health hazards, located in the US

  7. 43 CFR 404.3 - What is the Reclamation Rural Water Supply Program?

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false What is the Reclamation Rural Water Supply... RECLAMATION, DEPARTMENT OF THE INTERIOR RECLAMATION RURAL WATER SUPPLY PROGRAM Overview § 404.3 What is the Reclamation Rural Water Supply Program? This program addresses domestic, municipal, and industrial water...

  8. Refraction traveltime tomography based on damped wave equation for irregular topographic model

    Science.gov (United States)

    Park, Yunhui; Pyun, Sukjoon

    2018-03-01

    Land seismic data generally have time-static issues due to irregular topography and weathered layers at shallow depths. Unless the time static is handled appropriately, interpretation of the subsurface structures can be easily distorted. Therefore, static corrections are commonly applied to land seismic data. The near-surface velocity, which is required for static corrections, can be inferred from first-arrival traveltime tomography, which must consider the irregular topography, as the land seismic data are generally obtained in irregular topography. This paper proposes a refraction traveltime tomography technique that is applicable to an irregular topographic model. This technique uses unstructured meshes to express an irregular topography, and traveltimes calculated from the frequency-domain damped wavefields using the finite element method. The diagonal elements of the approximate Hessian matrix were adopted for preconditioning, and the principle of reciprocity was introduced to efficiently calculate the Fréchet derivative. We also included regularization to resolve the ill-posed inverse problem, and used the nonlinear conjugate gradient method to solve the inverse problem. As the damped wavefields were used, there were no issues associated with artificial reflections caused by unstructured meshes. In addition, the shadow zone problem could be circumvented because this method is based on the exact wave equation, which does not require a high-frequency assumption. Furthermore, the proposed method was both robust to an initial velocity model and efficient compared to full wavefield inversions. Through synthetic and field data examples, our method was shown to successfully reconstruct shallow velocity structures. To verify our method, static corrections were roughly applied to the field data using the estimated near-surface velocity. By comparing common shot gathers and stack sections with and without static corrections, we confirmed that the proposed tomography

  9. Regional Studies Program. Extraction of North Dakota lignite: environmental and reclamation issues

    Energy Technology Data Exchange (ETDEWEB)

    LaFevers, J.R.; Johnson, D.O.; Dvorak, A.J.

    1976-12-01

    This study, sponsored by the U.S. Energy Research and Development Administration, addresses the environmental implications of extraction of coal in North Dakota. These implications are supported by details of the geologic and historical background of the area of focus, the lignite resources in the Fort Union coalfield portion. The particular concentration is on the four-county area of Mercer, Dunn, McLean, and Oliver where substantial coal reserves exist and a potential gasification plant site has been identified. The purposes of this extensive study are to identify the land use and environmental problems and issues associated with extraction; to provide a base of information for assessing the impacts of various levels of extraction; to examine the economics and feasibility of reclamation; and to identify research that needs to be undertaken to evaluate and to improve reclamation practices. The study also includes a description of the physical and chemical soil characteristics and hydrological and climatic factors entailed in extraction, revegetation, and reclamation procedures.

  10. Factors of Reclamation Success at the Lignite Strip-Mined Land in Northern Greece

    Directory of Open Access Journals (Sweden)

    Thomas Panagopoulos

    2013-06-01

    Full Text Available The adverse ecological conditions at the lignite mines of Ptolemaida make the landscape reclamation difficult. The naturally established vegetation and soil properties were studied prior to reclamation. Various forest species were planted to assess the afforestation potential. The natural vegetation was heterogeneous but can be used for the analysis of the site. The soil of the spoil heaps was heterogeneous with unfavourable physicochemical properties. Surface soil temperature was still 24º C higher in bare soil than in soil covered with vegetation. The most successful species of the afforestation trial were Robinia pseudoacacia and Cedrus atlantica. Covering of fly ash spoils with topsoil presented poor results, while sewage sludge gave a favorable amelioration response in areas with high fly ash content. Topsoil from older stands was the suggested method to establish Robinia pseudoacacia. Reclamation success was dependent on appropriate planning; thus, the new landscape had to be designed in harmony with the surrounding landscape before the start of the mining activity.

  11. Shot- and angle-domain wave-equation traveltime inversion of reflection data: Synthetic and field data examples

    KAUST Repository

    Zhang, Sanzong

    2015-05-26

    Full-waveform inversion requires the accurate simulation of the dynamics and kinematics of wave propagation. This is difficult in practice because the amplitudes cannot be precisely reproduced for seismic waves in the earth. Wave-equation reflection traveltime tomography (WT) is proposed to avoid this problem by directly inverting the reflection-traveltime residuals without the use of the high-frequency approximation. We inverted synthetic traces and recorded seismic data for the velocity model by WT. Our results demonstrated that the wave-equation solution overcame the high-frequency approximation of ray-based tomography, was largely insensitive to the accurate modeling of amplitudes, and mitigated problems with ambiguous event identification. The synthetic examples illustrated the effectiveness of the WT method in providing a highly resolved estimate of the velocity model. A real data example from the Gulf of Mexico demonstrated these benefits of WT, but also found the limitations in traveltime residual estimation for complex models.

  12. Traveltime for the Truckee River between Tahoe City, California, and Vista, Nevada, 2006 and 2007

    Science.gov (United States)

    Crompton, E. James

    2008-01-01

    Traveltime measurements were made during 2006 and 2007 along the Truckee River between Tahoe City, Calif., and Vista, Nev. Fluorescent rhodamine WT dye was injected at various locations along the river during streamflows ranging from 143 to 2,660 cubic feet per second. The resulting data, presented in tabular and graphic form, may be useful to water-quality modelers or water-resources managers concerned with predicting the movement of soluble contaminants accidentally spilled into the Truckee River. The data provided in this report also could be used to determine the dispersion-related characteristics (duration and magnitude of pollutant concentrations) that may be expected in the Truckee River.

  13. Upper-mantle velocities below the Scandinavian Mountains from P- and S- wave traveltime tomography

    DEFF Research Database (Denmark)

    Hejrani, Babak; Balling, N.; Jacobsen, B. H.

    2017-01-01

    More than 20000 arrival-times of teleseismic P- and S-waves were measured over a period of more than 10 years in five separate temporary and two permanent seismic networks covering the Scandinavian (Scandes) Mountains and adjacent areas of the Baltic Shield. The relative traveltime residuals were...... between Lofoten and the crest of the Northern Scandes Mountains and stays off the coast further north. Seismic velocities in the depth interval 100-300 km change across the UMVB from low relative VP and even lower relative VS on the western side to high relative VP and even higher relative VS to the east...

  14. Upper-mantle P- and S- wave velocities across the Northern Tornquist Zone from traveltime tomography

    DEFF Research Database (Denmark)

    Hejrani, Babak; Balling, N.; Jacobsen, B. H.

    2015-01-01

    This study presents P- and S-wave velocity variations for the upper mantle in southern Scandinavia and northern Germany based on teleseismic traveltime tomography. Tectonically, this region includes the entire northern part of the prominent Tornquist Zone which follows along the transition from old...... delineated between shield areas (with high seismic mantle velocity) and basins (with lower velocity). It continues northwards into southern Norway near the Oslo Graben area and further north across the Southern Scandes Mountains. This main boundary, extending to a depth of at least 300 km, is even more...

  15. Regional Cost Estimates for Reclamation Practices on Arid and Semiarid Lands; TOPICAL

    International Nuclear Information System (INIS)

    W. K. Ostler

    2002-01-01

    The U.S. Army uses the Integrated Training Area Management program for managing training land. One of the major objectives of the Integrated Training Area Management program has been to develop a method for estimating training land carrying capacity in a sustainable manner. The Army Training and Testing Area Carrying Capacity methodology measures training load in terms of Maneuver Impact Miles. One Maneuver Impact Mile is the equivalent impact of an M1A2 tank traveling one mile while participating in an armor battalion field training exercise. The Army Training and Testing Area Carrying Capacity methodology is also designed to predict land maintenance costs in terms of dollars per Maneuver Impact Mile. The overall cost factor is calculated using the historical cost of land maintenance practices and the effectiveness of controlling erosion. Because land maintenance costs and effectiveness are influenced by the characteristics of the land, Army Training and Testing Area Carrying Capacity cost factors must be developed for each ecological region of the country. Costs for land maintenance activities are presented here for the semiarid and arid regions of the United States. Five ecoregions are recognized, and average values for reclamation activities are presented. Because there are many variables that can influence costs, ranges for reclamation activities are also presented. Costs are broken down into six major categories: seedbed preparation, fertilization, seeding, planting, mulching, and supplemental erosion control. Costs for most land reclamation practices and materials varied widely within and between ecological provinces. Although regional cost patterns were evident for some practices, the patterns were not consistent between practices. For the purpose of estimating land reclamation costs for the Army Training and Testing Area Carrying Capacity methodology, it may be desirable to use the ''Combined Average'' of all provinces found in the last row of each table

  16. Impact of direct greenhouse gas emissions on the carbon footprint of water reclamation processes employing nitrification–denitrification

    International Nuclear Information System (INIS)

    Schneider, Andrew G.; Townsend-Small, Amy; Rosso, Diego

    2015-01-01

    Water reclamation has the potential to reduce water supply demands from aquifers and more energy-intensive water production methods (e.g., seawater desalination). However, water reclamation via biological nitrification–denitrification is also associated with the direct emission of the greenhouse gases (GHGs) CO 2 , N 2 O, and CH 4 . We quantified these direct emissions from the nitrification–denitrification reactors of a water reclamation plant in Southern California, and measured the 14 C content of the CO 2 to distinguish between short- and long-lived carbon. The total emissions were 1.5 (± 0.2) g-fossil CO 2 m −3 of wastewater treated, 0.5 (± 0.1) g-CO 2 -eq of CH 4 m −3 , and 1.8 (± 0.5) g-CO 2 -eq of N 2 O m −3 , for a total of 3.9 (± 0.5) g-CO 2 -eq m −3 . This demonstrated that water reclamation can be a source of GHGs from long lived carbon, and thus a candidate for GHG reduction credit. From the 14 C measurements, we found that between 11.4% and 15.1% of the CO 2 directly emitted was derived from fossil sources, which challenges past assumptions that the direct CO 2 emissions from water reclamation contain only modern carbon. A comparison of our direct emission measurements with estimates of indirect emissions from several water production methods, however, showed that the direct emissions from water reclamation constitute only a small fraction of the plant's total GHG footprint. - Highlights: • Direct greenhouse gas emissions were measured at a wastewater reclamation plant. • These greenhouse gas emissions amounted to 3.9 (± 0.5) g-CO 2 -eq m −3 of wastewater. • 14 C analysis of the CO 2 emissions was conducted to determine the fossil component. • 11.4% to 15.1% of the emitted CO 2 was derived from fossil sources

  17. Impact of direct greenhouse gas emissions on the carbon footprint of water reclamation processes employing nitrification–denitrification

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, Andrew G., E-mail: andrew.schneider@yale.edu [University of Cincinnati, Department of Geology, Cincinnati, OH 45221 (United States); Townsend-Small, Amy [University of Cincinnati, Department of Geology, Cincinnati, OH 45221 (United States); University of Cincinnati, Department of Geography, Cincinnati, OH 45221 (United States); Rosso, Diego [Department of Civil and Environmental Engineering, University of California, Irvine, CA 92697-2175 (United States)

    2015-02-01

    Water reclamation has the potential to reduce water supply demands from aquifers and more energy-intensive water production methods (e.g., seawater desalination). However, water reclamation via biological nitrification–denitrification is also associated with the direct emission of the greenhouse gases (GHGs) CO{sub 2}, N{sub 2}O, and CH{sub 4}. We quantified these direct emissions from the nitrification–denitrification reactors of a water reclamation plant in Southern California, and measured the {sup 14}C content of the CO{sub 2} to distinguish between short- and long-lived carbon. The total emissions were 1.5 (± 0.2) g-fossil CO{sub 2} m{sup −3} of wastewater treated, 0.5 (± 0.1) g-CO{sub 2}-eq of CH{sub 4} m{sup −3}, and 1.8 (± 0.5) g-CO{sub 2}-eq of N{sub 2}O m{sup −3}, for a total of 3.9 (± 0.5) g-CO{sub 2}-eq m{sup −3}. This demonstrated that water reclamation can be a source of GHGs from long lived carbon, and thus a candidate for GHG reduction credit. From the {sup 14}C measurements, we found that between 11.4% and 15.1% of the CO{sub 2} directly emitted was derived from fossil sources, which challenges past assumptions that the direct CO{sub 2} emissions from water reclamation contain only modern carbon. A comparison of our direct emission measurements with estimates of indirect emissions from several water production methods, however, showed that the direct emissions from water reclamation constitute only a small fraction of the plant's total GHG footprint. - Highlights: • Direct greenhouse gas emissions were measured at a wastewater reclamation plant. • These greenhouse gas emissions amounted to 3.9 (± 0.5) g-CO{sub 2}-eq m{sup −3} of wastewater. • {sup 14}C analysis of the CO{sub 2} emissions was conducted to determine the fossil component. • 11.4% to 15.1% of the emitted CO{sub 2} was derived from fossil sources.

  18. Effectiveness of a constructed wetland for acid mine drainage reclamation

    International Nuclear Information System (INIS)

    Grant, A.J.; Ramey, B.A.; Jarrett, L.; Hart, G.

    1993-01-01

    Acid mine drainage (AMD) from an abandoned coal mine in southcentral Kentucky had pH levels as low as 2.5 and iron concentrations as high as 630 mg/L. In the summer of 1992, the SCS constructed a wetland system to treat the AMD that involved use of both physical and biological treatment. The AMD was fed into three anoxic limestone beds, followed by an aeration pond, before entering a series of four cattail cells and a polishing pond. Flow of AMD was initiated in the fall of 1992, and chemical and biological monitoring were conducted throughout the winter months. Chemical analysis of the water along the flow path of the AMD during the first six months of operation indicated that the limestone beds improved the pH substantially, and that most of the metals were removed prior to the water entering the cattail cells. The effectiveness of the wetland system to improve water quality also was monitored using the cladoceran (Ceriodaphnia dubia) survival and reproduction test. Determination of toxic levels indicated a substantial improvement in water quality below the limestone beds, and a slight decrease in toxicity throughout the cattail cells. However, toxic levels stayed the same or increased in the polishing pond. Water quality monitoring will continue through the growing season of 1993 to assess the impact of plant growth on the reclamation of the AMD

  19. Reclamation technology development for western Arkansas coal refuse waste materials

    International Nuclear Information System (INIS)

    King, J.R.; Veith, D.L.

    1994-01-01

    Coal mining has been an important industry in the Arkansas River Valley Major Land Resource Area (MLRA) of western Arkansas for more than 100 yr., most of it with little regard for environmental concerns. Almost 3,640 ha. of land affected by surface coal mines cover the seven-county area, with less than 1,200 ha. currently in various stages of operation or reclamation. Since only the active mining sites must now be reclaimed by law, the remaining 2,440 ha. of abandoned land remains at the mercy of natural forces. Little topsoil exists on these sites and the coal wastes are generally acidic with a pH in the 4.0-5.5 range. Revegetation attempts under these conditions generally require continued maintenance and retreatment until an acceptable cover is achieved. If and when an acceptable vegetative cover is established, the cost frequently approaches $7,400/ha. ($3,000/acre). In an effort to resolve these issues and provide some direction for stabilizing coal waste lands, the US Department of Agriculture through its Soil Conservation Service Plant Materials Center at Boonville, Arkansas, received a Congressional Pass through administered by the US Bureau of Mines, to support a 5-yr. revegetation study on the coal mine spoils of western Arkansas. This paper reports the results through the spring of 1994 on that portion of the study dealing with the establishment of blackberries as a cash crop on coal mine spoils

  20. Reclamation and closure of an oil sands tailings facility

    Energy Technology Data Exchange (ETDEWEB)

    Sobkowicz, J. [Thurber Engineering Ltd., Calgary, AB (Canada); Morgenstern, N. [Alberta Univ., Edmonton, AB (Canada)

    2010-07-01

    This PowerPoint presentation discussed methods of ensuring the successful reclamation of oil sands tailings facilities. Tailings should be reclaimed as mining proceeds in order to avoid an excessive accumulation of fluid fine tailings (FFT). The volume of mature fine tailings (MFT) in ponds should be limited in order to ensure effective tailings management. The reclaimed landforms should have good geotechnical stability and be comprised of self-sustaining native vegetation. Strength is needed to allow for timely capping and initial reclamation, and stiffness is required to minimize future settlement and to allow for the construction of a closure landscape. Reclamation strategies were presented for fines-dominated tailings; sand-depleted tailings; and sand-dominated tailings. Energy Resources Conservation Board (ERCB) criteria for tailings reclamation were discussed, and various monitoring and performance assessment strategies were presented. tabs., figs.

  1. Town of Edinburg landfill reclamation demonstration project. Final report

    International Nuclear Information System (INIS)

    1992-01-01

    A landfill reclamation demonstration project was hosted at the Town of Edinburg municipal landfill in northwest Saratoga County, with majority funding provided by the New York State Energy Research and Development Authority. The report examines various separation techniques employed at the site and appropriate uses for reclaimed materials. Specifications regarding engineered work plans, health and safety monitoring, and contingency preparedness are discussed. Major potential applications and benefits of using landfill reclamation technology at existing landfills are identified and discussed. The research and development aspect of the report also examines optimal screening technologies, site selection protocol and the results of a test burn of reclaimed waste at a waste-to-energy facility. Landfill reclamation costs are developed, and economic comparisons are made between reclamation costs and conventional landfill closure costs, with key criteria identified

  2. Addressing Open Water Data Challenges in the Bureau of Reclamation

    Science.gov (United States)

    Brekke, L. D.; Danner, A.; Nagode, J.; Rocha, J.; Poulton, S.; Anderson, A.

    2017-12-01

    The Bureau of Reclamation is largest wholesaler of water in the United States. Located in the 17 western states, Reclamation serves water to 31 million people, provides irrigated water to 20 percent of Western farmers, and is the second largest producer of hydroelectric power in the United States. Through these activities, Reclamation generates large amounts of water and water-related data, describing reservoirs and river system conditions, hydropower, environmental compliance activities, infrastructure assets, and other aspects of Reclamation's mission activities. Reclamation aims to make water and water-related data sets more easily found, accessed, and used in decision-making activities in order to benefit the public, private sector, and research communities. Historically, there has not been an integrated, bureau-wide system to store data in machine-readable formats; nor a system to permit centralized browsing, open access, and web-services. Reclamation began addressing these limitations by developing the Reclamation Water Information System (RWIS), released in Spring 2017 (https://water.usbr.gov/). A bureau-wide team contributed to RWIS development, including water data stewards, database administrators, and information technology (IT) specialists. The first RWIS release publishes reservoir time series data from Reclamation's five regions and includes a map interface for sites identification, a query interface for data discovery and access, and web-services for automated retrieval. As RWIS enhancement continues, the development team is developing a companion system - the Reclamation Information Sharing Environment (RISE) - to provide access to the other data subjects and types (geospatial, documents). While RWIS and RISE are promising starts, Reclamation continues to face challenges in addressing open water data goals: making data consolidation and open publishing a value-added activity for programs that publish data locally, going beyond providing open access

  3. Seismic traveltime tomography by use of gridpoints discritization; Koshitenho ni yoru danseiha tomography kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Hirai, T; Watanabe, T; Sassa, K [Kyoto University, Kyoto (Japan). Faculty of Engineering

    1996-05-01

    Efforts were made to enhance analytical precision and stabilize the results in seismic traveltime tomography by use of a method wherein the velocity distribution is expressed as a continuous function interpolated by parameters respectively assigned to the gridpoints. In this method, the slowness data are regarded as the parameters respectively assigned to the gridpoints, and the slowness value at a given point is determined after interpolation by the gridpoints surrounding the said point. A method based on the variation principle was used for ray tracing. As the result, it was confirmed that this method determines the ray path and traveltime with high precision. A method of least squares using Lagrange`s multiplier was applied for inversion. Comparison was made between the use of cells and the use of gridpoints in the results of inversions performed for an inclined 4-layer structure model, when it was found that the values involving the boundaries between layers, inclinations of the layers, and velocities of seismic waves are ambiguous with the cells while those with the gridpoints are reconstructed roughly correctly. 5 refs., 7 figs., 1 tab.

  4. Remote sensing of temperature and wind using acoustic travel-time measurements

    Energy Technology Data Exchange (ETDEWEB)

    Barth, Manuela; Fischer, Gabi; Raabe, Armin; Weisse, Frank [Leipzig Univ. (Germany). Inst. fuer Meteorologie; Ziemann, Astrid [Technische Univ. Dresden (Germany). Professur fuer Meteorologie

    2013-04-15

    A remote sensing technique to detect area-averaged temperature and flow properties within an area under investigation, utilizing acoustic travel-time measurements, is introduced. This technique uses the dependency of the speed of acoustic signals on the meteorological parameters temperature and wind along the propagation path. The method itself is scalable: It is applicable for investigation areas with an extent of some hundred square metres as well as for small-scale areas in the range of one square metre. Moreover, an arrangement of the acoustic transducers at several height levels makes it possible to determine profiles and gradients of the meteorological quantities. With the help of two examples the potential of this remote sensing technique for simultaneously measuring averaged temperature and flow fields is demonstrated. A comparison of time histories of temperature and wind values derived from acoustic travel-time measurements with point measurements shows a qualitative agreement whereas calculated root-mean-square errors differ for the two example applications. They amount to 1.4 K and 0.3 m/s for transducer distances of 60 m and 0.4 K and 0.2 m/s for transducer distances in the range of one metre. (orig.)

  5. Overcoming soil compaction in surface mine reclamation

    Energy Technology Data Exchange (ETDEWEB)

    Sweigard, R.J. (University of Kentucky, Lexington, KY (USA). Dept. of Mining Engineering)

    1991-01-01

    Rubber-tyred soil reconstruction equipment causes compaction of soil and means surface mine operators cannot satisfy crop yield standards defined by the Surface Mining Control and Reclamation Act. Soil compaction can be overcome by either modifying the reconstruction process or alleviating the problem, for example by deep tillage, once it occurs. The Dept. of Mining Engineering at the Institute of Mining and Minerals Research is conducting a laboratory investigation into a method of injecting low density porous organic material into a bin containing soil at the same time as the soil is ripped. This should prevent voids collapsing when subjected to forces from farm equipment and natural sources. Soil analyses are performed before and after the injection. Ripping and injection with ground pecan shells had a residual effect on nuclear bulk density compared to the initially compacted case and also showed an improvement in hydraulic conductivity. Work is in progress on modifying the system to handle other injection material and should lead on to field tests on a prototype involving both soil analysis and crop yield determination. 1 fig.

  6. Overcoming soil compaction in surface mine reclamation

    International Nuclear Information System (INIS)

    Sweigard, R.J.

    1991-01-01

    Rubber-tyred soil reconstruction equipment causes compaction of soil and means surface mine operators cannot satisfy crop yield standards defined by the Surface Mining Control and Reclamation Act. Soil compaction can be overcome by either modifying the reconstruction process or alleviating the problem, for example by deep tillage, once it occurs. The Dept. of Mining Engineering at the Institute of Mining and Minerals Research is conducting a laboratory investigation into a method of injecting low density porous organic material into a bin containing soil at the same time as the soil is ripped. This should prevent voids collapsing when subjected to forces from farm equipment and natural sources. Soil analyses are performed before and after the injection. Ripping and injection with ground pecan shells had a residual effect on nuclear bulk density compared to the initially compacted case and also showed an improvement in hydraulic conductivity. Work is in progress on modifying the system to handle other injection material and should lead on to field tests on a prototype involving both soil analysis and crop yield determination. 1 fig

  7. The way it was : reclamation research gears up for oilsands expansion

    Energy Technology Data Exchange (ETDEWEB)

    Jaremko, D.

    2005-10-01

    Although many new developments in oilsands mining operations are in situ, the continuing reliance on truck and shovel projects will mean more mine-scale disturbance and more tailings. Managing tailings is an integral aspect of mine reclamation. Syncrude and Suncor have reclaimed close to 5000 hectares of land, planting trees and grasses. This article discussed future reclamation strategies, which are targeted to also include constructed and natural wetlands to provide habitat for local waterfowl, vegetation and animals. Details of an ongoing 4 year study of natural and constructed wetlands in the Fort McMurray oil sands region were provided. The study has focused on opportunistic wetlands that form themselves close to man-made structures. Because of their microbial content, wetlands are capable of treating contaminated water. A pilot-scale constructed wetland has started operating at Keyspan Energy's Strachan gas plant. It was noted that the peatlands that have been removed cannot easily be replaced after mine closure, since their development is the result of thousands of years of production and evolution. The goal of the project is to create marshes in order to re-contour the land with a range of different land features. Details of the Oil Sands Tailings Research Facility (OSTRF) were provided, a $2.3 million facility with a focus on finding better ways to manage tailings. One of the main problems in tailings management is the length of time it takes for tailings to settle after being discharged from the extraction plant. A description of the facility was provided, with details of research into tailings-thickening procedures which result in composite or consolidated tailings, as well as a project where tailings flow and settle into deposition modules, which can then be lifted out and taken away for examination. Plans for test pits in the future were also reviewed. It was concluded that reclamation is an increasingly important aspect of oil sands operations

  8. The use of some geochemical methods in evaporation pond reclamation assessments

    International Nuclear Information System (INIS)

    Thimm, H. F.; Siebert, L. D.

    1998-01-01

    Certain geochemical techniques, such as complete inorganic identification, rare earth fingerprints, and the use of chondrite plots that may be used over and above CCME (Canadian Council of Ministers of the Environment) standards in the reclamation of evaporation ponds, are described. These techniques permit the separation of contaminant elements that occur naturally beyond provincial or CCME standards. They also permit conclusions to be drawn about soil stratification around the lagoons. The methods are less costly yet more effective than conventional assessment methods. Use of these techniques is illustrated with an example from an Alberta gas plant. 7 refs., 6 tabs., 5 figs

  9. Extended exploding reflector concept for computing prestack traveltimes for waves of different type in the DSR framework

    KAUST Repository

    Duchkov, Anton A.; Serdyukov, Alexander S.; Alkhalifah, Tariq Ali

    2013-01-01

    including reflected, head and diving waves. We develop a WENO-RK numerical scheme for solving all mentioned forms of the DSR equation. Finally the extended exploding reflector concept can be used for computing prestack traveltimes while initiating the numerical solver as if a reflector was exploding in extended imaging space.

  10. Shot- and angle-domain wave-equation traveltime inversion of reflection data: Synthetic and field data examples

    KAUST Repository

    Zhang, Sanzong; Luo, Yi; Schuster, Gerard T.

    2015-01-01

    . The synthetic examples illustrated the effectiveness of the WT method in providing a highly resolved estimate of the velocity model. A real data example from the Gulf of Mexico demonstrated these benefits of WT, but also found the limitations in traveltime

  11. Is a Solvent Reclamation Facility Considered a Chemical Process Plant

    Science.gov (United States)

    This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

  12. Virological studies of water from the Cape Flats reclamation plant

    African Journals Online (AJOL)

    4500 m3 of water per day, was constructed at the Cape Flats sewage works and studied over a period of ... In brief, gels were fIxed with methanol 50%, acetic acid 10% for 1 hour, followed by ethanol 10%, acetic acid 0,5% for 1 hour and then ...

  13. Microbial turnover and incorporation of organic compounds in oil sand mining reclamation sites

    Science.gov (United States)

    Lappé, M.; Kallmeyer, J.

    2013-12-01

    Microorganisms play an important role in the development of new soils and in the reclamation of disturbed landscapes. Especially in hydrocarbon-contaminated soils their ability to degrade organic matter and pollutants makes them essential to re-establish full ecosystem functionality. Microbes are also involved in the mobilization of nutrients for plant growth and in the production of greenhouse gases. Reclamation sites from oil sand mining activities in Alberta, Canada, contain residual bitumen as well as other hydrocarbons. So, these areas provide a great opportunity to study microbial degradation of residual contaminants from oil sand. To get an impression of degradation rates as well as metabolic pathways, incubation experiments were performed in the lab. We measured microbial turnover (catabolic metabolism) and incorporation (anabolic metabolism) rates of different common organic compounds in samples from differently treated reclamation sites - with plant cover and without plant cover. About 10 g of sample material was suspended in 10 mL of a solution that mimics the in-situ concentration of dissolved ions. Radioactively labelled 14C-acetate was added as a common substrate, whereas 14C-naphthenic acid was chosen to investigate the microbial community's capability to utilize a typical hydrocarbon pollutant in oil sand tailings as a nutrient source. To test for the influence of fertilizers on microbial activity, phosphate, nitrate and potassium were added to some samples in different combinations. Incubations were run over two different time periods (7 and 14 days). At the end of each incubation experiment, the amount of produced 14CO2, 14C incorporated into the cells and the remaining unreacted 14C in the slurry were measured. First results show that most of the added 14C-acetate is used for respiration as it is mostly released as 14CO2. In upper soil layers only about 3% of 14C is incorporated into cells, whereas in deeper horizons with lower cell abundances

  14. Microbes from mined sites: Harnessing their potential for reclamation of derelict mine sites

    International Nuclear Information System (INIS)

    Thavamani, Palanisami; Samkumar, R. Amos; Satheesh, Viswanathan; Subashchandrabose, Suresh R.; Ramadass, Kavitha; Naidu, Ravi; Venkateswarlu, Kadiyala; Megharaj, Mallavarapu

    2017-01-01

    Derelict mines pose potential risks to environmental health. Several factors such as soil structure, organic matter, and nutrient content are the greatly affected qualities in mined soils. Soil microbial communities are an important element for successful reclamation because of their major role in nutrient cycling, plant establishment, geochemical transformations, and soil formation. Yet, microorganisms generally remain an undervalued asset in mined sites. The microbial diversity in derelict mine sites consists of diverse species belonging to four key phyla: Proteobacteria, Acidobacteria, Firmicutes, and Bacteroidetes. The activity of plant symbiotic microorganisms including root-colonizing rhizobacteria and ectomycorrhizal fungi of existing vegetation in the mined sites is very high since most of these microbes are extremophiles. This review outlines the importance of microorganisms to soil health and the rehabilitation of derelict mines and how microbial activity and diversity can be exploited to better plan the soil rehabilitation. Besides highlighting the major breakthroughs in the application of microorganisms for mined site reclamation, we provide a critical view on plant−microbiome interactions to improve revegetation at the mined sites. Also, the need has been emphasized for deciphering the molecular mechanisms of adaptation and resistance of rhizosphere and non-rhizosphere microbes in abandoned mine sites, understanding their role in remediation, and subsequent harnessing of their potential to pave the way in future rehabilitation strategies for mined sites. - Highlights: • Abandoned mines pose potential risks to human and environmental health. • Re-establishment of a self-sustaining vegetative cover at derelict mines is a major challenge. • Soil microbial communities are very important for successful reclamation of mined sites. • Role of microorganisms in soil function in derelict mines needs to be understood.

  15. Changes in ecosystem carbon pool and soil CO2 flux following post-mine reclamation in dry tropical environment, India.

    Science.gov (United States)

    Ahirwal, Jitendra; Maiti, Subodh Kumar; Singh, Ashok Kumar

    2017-04-01

    Open strip mining of coal results in loss of natural carbon (C) sink and increased emission of CO 2 into the atmosphere. A field study was carried out at five revegetated coal mine lands (7, 8, 9, 10 and 11years) to assess the impact of the reclamation on soil properties, accretion of soil organic C (SOC) and nitrogen (N) stock, changes in ecosystem C pool and soil CO 2 flux. We estimated the presence of C in the tree biomass, soils, litter and microbial biomass to determine the total C sequestration potential of the post mining reclaimed land. To determine the C sequestration of the reclaimed ecosystem, soil CO 2 flux was measured along with the CO 2 sequestration. Reclaimed mine soil (RMS) fertility increased along the age of reclamation and decreases with the soil depths that may be attributed to the change in mine soils characteristics and plant growth. After 7 to 11years of reclamation, SOC and N stocks increased two times. SOC sequestration (1.71MgCha -1 year -1 ) and total ecosystem C pool (3.72MgCha -1 year -1 ) increased with the age of reclamation (CO 2 equivalent: 13.63MgCO 2 ha -1 year -1 ). After 11years of reclamation, soil CO 2 flux (2.36±0.95μmolm -2 s -1 ) was found four times higher than the natural forest soils (Shorea robusta Gaertn. F). The study shows that reclaimed mine land can act as a source/sink of CO 2 in the terrestrial ecosystem and plays an important role to offset increased emission of CO 2 in the atmosphere. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Abandoned coal mine refuse areas: their reclamation and use

    Energy Technology Data Exchange (ETDEWEB)

    Zellmer, S. D.; Carter, R. P.

    1977-01-01

    There are over 4,000 abandoned deep coal mine refuse areas in Illinois ranging in size from a few acres to as large as 160 acres. These sites produce quantities of pollutants which affect the environment, have no real land value, and are a scar on the landscape. The Staunton 1 Site Reclamation Demonstration Project addressess these problems. It also is developing and evaluating new cost-effective methods for reclaiming refuse areas of this type. The program involved determining the final land use for the site, development of detailed engineering plans and specifications for the reclamation effort, a prereclamation environmental inventory, and implementation. Post-construction evaluation is now in process to determine the effectiveness of the reclamation effort. Detailed investigations are being conducted to determine surface water quality improvement, the amount of suitable surface cover and amendments required for revegetation, and field evaluation of candidate vegetation species for revegetation. Other research is examining soil microbial populations, soil fauna reactions, and changes in surface material characteristics at the reclamation site. Surveys are being conducted on groundwater quality, effects on the aquatic ecosystem, and wildlife use of the area. An economic evaluation is underway to determine the cost effectiveness of the total effort and of individual reclamation procedures. Preliminary results from the first year's environmental evaluation of various method tested will be described in detail. An economic assessment, including cost effectiveness, of the first year's work is given.

  17. Ecological bases of land reclamation in the mining regions of Ukraine

    Science.gov (United States)

    Kharytonov, Mykola; Gumentyk, Myhailo; Heilmeier, Hermann

    2016-04-01

    The mining production is situated in the several provinces of Ukraine. Specification of the problem coal and mixed sulfide mining activities in Ukraine have resulted in the generation of hundreds of millions of tons of hazardous wastes consisting of rest of manganese and iron oxides, traces of rare elements, sulphur bearing minerals, such as pyrite. These wastes have been / are still deposited, throughout the years, in huge stockpiles and dams. Land restoration in the mining region takes several forms. One of the ways is land reclamation. This way includes forest, recreation and agricultural reclamation. Land reclamation in industrial regions is conducted in one technological cycle with the process of ore mining. The soil mass is taken off, piled up and heaped onto the land after the rock has been replaced. The ecohydrogeological background of reclaimed lands forming and exploration was worked out. It foresee an environment restoration of disturbed lands to manage flow down, atmospheric precipitations taking aside, the process of the reclaimed profile biogenetic horizons formation and promotion with total depth 1.0-1.2 m and involvement of more suitable rocks and artificial drainage building. The effectiveness of different models of land reclamation and heavy metals migration through the rock-soil-plant system was investigated. Field experiments were carried out to study the adaptive potential of plants having different requirements for substrate fertility, with the main task to assess the prospects of land management for the rocks of the Nikopol manganese basin. The rocks exposed to the surface after manganese ore mining, first technical stage of landscape restoration, and plant melioration stages pass into other geochemical conditions and change their physical-chemical properties. During long-term melioration crops have dramatically improved some processes as following: bioweathering of rocks, phytomeliorated rocks fertility growth, etc. Meantime some rocks

  18. Temporal and spatial variations of travel-time residuals in central California for Novaya Zemlya events

    International Nuclear Information System (INIS)

    Robinson, R.; Iyer, H.M.

    1976-01-01

    Eight large nuclear explosions in Novaya Zemlya from October 1969 through November 1974 were used to monitor long-term variations in crustal seismic velocity near the San Andreas fault in central California. Relative P-wave travel-time residuals appear to be accurate to approximately +-0.1 sec. Of the over 100 stations used, none show clearly significant temporal variations in residual greater than this amount, corresponding to about a 4 percent change in velocity in the upper crust. Average relative residuals at individual stations show a large spatial variation of about 1.5 sec. These variations reflect both a complex crustal geology and changes in crustal thickness and provide a potentially powerful tool for studying crustal structure

  19. HELIOSEISMIC SIGNATURE OF CHROMOSPHERIC DOWNFLOWS IN ACOUSTIC TRAVEL-TIME MEASUREMENTS FROM HINODE

    International Nuclear Information System (INIS)

    Nagashima, Kaori; Sekii, Takashi; Kosovichev, Alexander G.; Zhao Junwei; Tarbell, Theodore D.

    2009-01-01

    We report on a signature of chromospheric downflows in two emerging flux regions detected by time-distance helioseismology analysis. We use both chromospheric intensity oscillation data in the Ca II H line and photospheric Dopplergrams in the Fe I 557.6 nm line obtained by Hinode/SOT for our analyses. By cross-correlating the Ca II oscillation signals, we have detected a travel-time anomaly in the plage regions; outward travel times are shorter than inward travel times by 0.5-1 minute. However, such an anomaly is absent in the Fe I data. These results can be interpreted as evidence of downflows in the lower chromosphere. The downflow speed is estimated to be below 10 km s -1 . This result demonstrates a new possibility of studying chromospheric flows by time-distance analysis.

  20. 75 FR 67993 - Hydropower Resource Assessment at Existing Reclamation Facilities-Draft Report

    Science.gov (United States)

    2010-11-04

    ... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Hydropower Resource Assessment at Existing... comment the ``Hydropower Resource Assessment at Existing Reclamation Facilities'' (HRA) Draft Report. The HRA is an assessment of the economic and technical potential for hydropower development at existing...

  1. Sand and gravel mine operations and reclamation planning using microcomputers

    Energy Technology Data Exchange (ETDEWEB)

    Ariffin, J.B.

    1990-02-01

    The purpose of this study is to focus on the application of microcomputers, also known as personal computers, in planning for sand and gravel mine operations and reclamation at a site in Story County, Iowa. This site, called the Arrasmith Pit, is operated by Martin Marietta Aggregates, Inc. The Arrasmith site, which encompasses an area of about 25 acres, is a relatively small site for aggregate mining. However, planning for the concurrent mine operation and reclamation program at this site is just as critical as with larger sites and the planning process is the same.

  2. Disposal and reclamation of southwestern coal and uranium wastes

    International Nuclear Information System (INIS)

    Wewerka, E.M.

    1979-01-01

    The types of solid wastes and effluents produced by the southwestern coal and uranium mining and milling industries are considered, and the current methods for the disposal and reclamation of these materials discussed. The major means of disposing of the solid wastes from both industries is by land fill or in some instances ponding. Sludges or aqueous wastes are normally discharged into settling and evaporative ponds. Basic reclamation measures for nearly all coal and uranium waste disposal sites include solids stabilization, compacting, grading, soil preparation, and revegetation. Impermeable liners and caps are beginning to be applied to disposal sites for some of the more harmful coal and uranium waste materials

  3. Land reclamation on the Nevada Test Site: A field tour

    International Nuclear Information System (INIS)

    Winkel, V.K.; Ostler, W.K.

    1993-01-01

    An all-day tour to observe and land reclamation on the Nevada Test Site was conducted in conjunction with the 8th Wildland Shrub and Arid Land Restoration Symposium. Tour participants were introduced to the US Department of Energy reclamation programs for Yucca Mountain Site Characterization Project and Treatability Studies for Soil Media (TSSM) Project. The tour consisted of several stops that covered a variety of topics and studies including revegetation by seeding, topsoil stockpile stabilization, erosion control, shrub transplanting, shrub herbivory, irrigation, mulching, water harvesting, and weather monitoring

  4. On the Use of Calibration Explosions at the Former Semipalatinsk Test Site for Compiling a Travel-time Model of the Crust and Upper Mantle

    Science.gov (United States)

    Belyashova, N. N.; Shacilov, V. I.; Mikhailova, N. N.; Komarov, I. I.; Sinyova, Z. I.; Belyashov, A. V.; Malakhova, M. N.

    - Two chemical calibration explosions, conducted at the former Semipalatinsk nuclear test site in 1998 with charges of 25 tons and 100 tons TNT, have been used for developing travel-time curves and generalized one-dimensional velocity models of the crust and upper mantle of the platform region of Kazakhstan. The explosions were recorded by a number of digital seismic stations, located in Kazakhstan at distances ranging from 0 to 720km. The travel-time tables developed in this paper cover the phases P, Pn, Pg, S, Sn, Lg in a range of 0-740km and the velocity models apply to the crust down to 44km depth and to the mantle down to 120km. A comparison of the compiled travel-time tables with existing travel-time tables of CSE and IASPEI91 is presented.

  5. EFFECTIVENESS OF RECLAMATION OF SODA WASTE DISPOSAL SITE AT JANIKOWO USING SEWAGE SLUDGE

    Directory of Open Access Journals (Sweden)

    Jan Siuta

    2014-10-01

    Full Text Available There are numerous reclamation technologies based on sewage sludge treatment, however, one that is most purposeful consists in applying the sludge in order to achieve green cover (bioremediation with plants on fine grained waste disposal sites which have a high potential for soil formation on the one hand, but on the other, are highly vulnerable to erosive action of wind and atmospheric precipitation. The technological waste at the Janikowo Soda Plant has liquid consistence, contains fine-grained (dust-like and water soluble calcium compounds, and is highly alkaline and saline. The waste was disposed and dehydrated in the large-area earthen ponds elevated beyond the ground level. The combined surface of all the exploited settling ponds (with roads and escarpments jointly exceeds 105 ha. Dehydration by infiltration and evaporation was a source of unrestricted dust emissions from the drying and dry surfaces of the waste site. Urgent action was then deemed necessary to manage the high risk of nuisance dust to the local population, technical infrastructure, engines and cars. Consequently, it was decided that the best way to manage nuisance dust would be to create a thick and permanent vegetal cover on the waste site. The vegetal cover would also limit salt infiltration from the disposal site to groundwater and to adjacent agricultural land, and contribute to improving the local landscape values. Treatment with adequately high (appropriate for reclamation purposes doses of sewage sludge and sowing of plants which have a high growth potential and nutrient demand resulted in the quick establishment of green cover on the waste disposal site. The contents of mineral elements in plants and in the top layer of the ground reclaimed were analyzed starting from the year 2000 onwards until the year 2013. The chemical composition of sewage sludge was systematically analyzed as well. No excessive contents were found of main elements neither of heavy metals in

  6. 43 CFR 422.9 - Reclamation law enforcement contracts and cooperative agreements.

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Reclamation law enforcement contracts and... PROJECTS Program Requirements § 422.9 Reclamation law enforcement contracts and cooperative agreements. (a... Federal laws. (b) Each contract and cooperative agreement authorizing the exercise of Reclamation law...

  7. Monitoring and analysis of coastal reclamation from 1995-2015 in Tianjin Binhai New Area, China.

    Science.gov (United States)

    Chen, Wengang; Wang, Dongchuan; Huang, Yong; Chen, Liding; Zhang, Lihui; Wei, Xiangwang; Sang, Mengqin; Wang, Feicui; Liu, Jinya; Hu, Bingxu

    2017-06-20

    Increasing coastal reclamation activities have been undertaken to solve the conflict between people and land resources, creating significant challenges for coordinating coastal reclamation, economic development and environmental protection. This paper analyzes the effects of coast reclamation on Gross Domestic Product growth and the quality of inshore seawater in the Tianjin Binhai New Area. Remote sensing and a Geographic Information System were used to extract the information of coastal reclamation. The correlation between the area of coastal reclamation, GDP growth and the quality of inshore seawater was analyzed and a decoupling elasticity model was used to explore trends in the relationship between economic development and coastal reclamation. Results showed that coastal reclamation activities played an important role in promoting economic development, but greatly damaged the ecological environment. Although the relationship between coastal reclamation and economic development has weakened during the last three periods, the influence on the environment will continue because of the cumulative effects of pollution. To maintain a balance between coastal reclamation, economic development and environmental protection, (1) coastal reclamation planning must address both economic and environmental outcomes; (2) environmental deficiencies from existing coastal reclamation projects must be rectified; and (3) the legal system regulating coastal reclamation needs to be refined and strengthened.

  8. Pedo-geological activities with exploration of lignite deposits and their value for soil reclamation

    Energy Technology Data Exchange (ETDEWEB)

    Wuensche, M.; Richter, H.; Oehme, W.D.

    1983-10-01

    A description is presented of geological conditions facilitating soil reclamation and of the overburden removal technologies to be applied. Pedo-geological pre-exploitation studies are indispensable for soil reclamation and their methods and results are described with a final reference to the value of land reclamation for national economy.

  9. 75 FR 81643 - Hydropower Resource Assessment at Existing Reclamation Facilities-Draft Report

    Science.gov (United States)

    2010-12-28

    ... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Hydropower Resource Assessment at Existing... period for review of the Hydropower Resource Assessment at Existing Reclamation Facilities Draft Report... sustainable, affordable hydropower for our national electricity supplies. Reclamation has 476 dams and 8,116...

  10. 30 CFR 780.27 - Reclamation plan: Surface mining near underground mining.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Reclamation plan: Surface mining near underground mining. 780.27 Section 780.27 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL...

  11. 30 CFR 906.25 - Approval of Colorado abandoned mine land reclamation plan amendments.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Approval of Colorado abandoned mine land reclamation plan amendments. 906.25 Section 906.25 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND... STATE COLORADO § 906.25 Approval of Colorado abandoned mine land reclamation plan amendments. The...

  12. Utilisation of Products of the Thermal Reclamation of Post Reclamation Dusts in the Production Technology of Ceramic Building Materials

    Directory of Open Access Journals (Sweden)

    Holtzer M.

    2015-12-01

    Full Text Available The problem related to the management of post reclamation dusts generated in the reclamation process of waste moulding sands with organic binders is presented in the hereby paper. Waste materials generated in this process are products hazardous for the environment and should be utilised. The prototype stand for the utilisation of this dangerous material in its co-burning with coal was developed and patented in AGH in Krakow. The stand was installed in one of the domestic casting houses. As the utilisation result the transformed waste product is obtained and its management in the production of ceramic materials constitutes the subject of the presented publication.

  13. First-arrival traveltime computation for quasi-P waves in 2D transversely isotropic media using Fermat’s principle-based fast marching

    Science.gov (United States)

    Hu, Jiangtao; Cao, Junxing; Wang, Huazhong; Wang, Xingjian; Jiang, Xudong

    2017-12-01

    First-arrival traveltime computation for quasi-P waves in transversely isotropic (TI) media is the key component of tomography and depth migration. It is appealing to use the fast marching method in isotropic media as it efficiently computes traveltime along an expanding wavefront. It uses the finite difference method to solve the eikonal equation. However, applying the fast marching method in anisotropic media faces challenges because the anisotropy introduces additional nonlinearity in the eikonal equation and solving this nonlinear eikonal equation with the finite difference method is challenging. To address this problem, we present a Fermat’s principle-based fast marching method to compute traveltime in two-dimensional TI media. This method is applicable in both vertical and tilted TI (VTI and TTI) media. It computes traveltime along an expanding wavefront using Fermat’s principle instead of the eikonal equation. Thus, it does not suffer from the nonlinearity of the eikonal equation in TI media. To compute traveltime using Fermat’s principle, the explicit expression of group velocity in TI media is required to describe the ray propagation. The moveout approximation is adopted to obtain the explicit expression of group velocity. Numerical examples on both VTI and TTI models show that the traveltime contour obtained by the proposed method matches well with the wavefront from the wave equation. This shows that the proposed method could be used in depth migration and tomography.

  14. Extended exploding reflector concept for computing prestack traveltimes for waves of different type in the DSR framework

    KAUST Repository

    Duchkov, Anton A.

    2013-09-22

    The double-square-root (DSR) equation can be viewed as a Hamilton-Jacobi equation describing kinematics of downward data continuation in depth. It describes simultaneous propagation of source and receiver rays which allows computing reflection wave prestack traveltimes (for multiple sources) in a one run thus speeding up solution of the forward problem. Here we give and overview of different alternative forms of the DSR equation which allows stepping in two-way time and subsurface offset instead of depth. Different forms of the DSR equation are suitable for computing different types of waves including reflected, head and diving waves. We develop a WENO-RK numerical scheme for solving all mentioned forms of the DSR equation. Finally the extended exploding reflector concept can be used for computing prestack traveltimes while initiating the numerical solver as if a reflector was exploding in extended imaging space.

  15. Phytoremediation Potential of Plants Grown on Reclaimed Spoil Lands

    African Journals Online (AJOL)

    Post-mining reclamation is aimed at restoring the productive capacity of the disturbed land and ensuring socio-economic and environmental sustainability. Methods that have been employed for the reclamation activity are reported in the literature. This paper studied the utility of certain plant species in Ghana for remediating ...

  16. Influence of land reclamation on the status of groundwater in ...

    African Journals Online (AJOL)

    Influence of land reclamation on the status of groundwater in Borokiri area of Port Harcourt, Niger Delta, Nigeria. ... The resulting resistivity data were iterated using a RES2DINV Computer Program. The results were used to map the quality potential of groundwater in the area. The results of the mapping process indicate that ...

  17. Recycling: Establishing a Citizen-Sponsored Reclamation Center.

    Science.gov (United States)

    Keep America Beautiful, Inc., New York, NY.

    This booklet applies the Clean Community System (CCS) of Keep America Beautiful, Inc. to the development of citizen-sponsored recycling projects. Six initial steps in establishing a reclamation center are given and include information gathering, market analysis, legal requirements, and site location. Suggestions are included for recruiting staff…

  18. Land reclamation program. Annual report, July 1976--October 1977

    Energy Technology Data Exchange (ETDEWEB)

    Carter, R. P.; Hinchman, R. R.; Johnson, D. O.

    1978-05-01

    The Argonne Land Reclamation Program, sponsored by the United States Department of Energy's Division of Environment and Safety, is a joint effort of two Argonne divisions: Energy and Environmental Systems and Environmental Impact Studies. The program is carried out by a multidisciplinary team of scientists and engineers, and has three primary goals: (1) to conduct research and development projects that are focused on both near- and far-term reclamation problems in all major U.S. coal regions; (2) to coordinate and evaluate related studies at other institutions; and (3) to keep industry and government decision-makers informed of reasonable reclamation options and their costs. Since many of the factors that influence reclamation success are region- or site-specific, the program has adopted a regional approach to field and laboratory research. In each of the nation's eight major coal regions, one or more mines have been (or will be) selected as sites for field studies. The vast amount of data gathered by the research arm of the program has also required the development of a data systems component of the program. This annual report is intended to provide a summary of the program's activities and accomplishments during fiscal year 1977.

  19. Adopted practices for mined land reclamation in Ghana: a case ...

    African Journals Online (AJOL)

    Although mining is an economic booster, its negative ecological backlashes have become a great concern to environmental experts, development planners and policy makers in the era of increasing environment and sustainable development concerns. Reclamation of derelict mine sites is necessary for restoration of ...

  20. 31 CFR 210.9 - Parties to the reclamation.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Parties to the reclamation. 210.9 Section 210.9 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY FINANCIAL MANAGEMENT SERVICE FEDERAL GOVERNMENT PARTICIPATION IN THE...

  1. ENHANCEMENT OF TERRESTRIAL CARBON SINKS THROUGH RECLAMATION OF ABANDONED MINE LANDS IN THE APPALACHIAN REGION

    Energy Technology Data Exchange (ETDEWEB)

    Gary D. Kronrad

    2002-12-01

    The U.S.D.I. Office of Surface Mining (OSM) estimates that there are approximately 1 million acres of abandoned mine land (AML) in the Appalachian region. AML lands are classified as areas that were inadequately reclaimed or were left unreclaimed prior to the passage of the 1977 Surface Mining Control and Reclamation Act, and where no federal or state laws require any further reclamation responsibility to any company or individual. Reclamation and afforestation of these sites have the potential to provide landowners with cyclical timber revenues, generate environmental benefits to surrounding communities, and sequester carbon in the terrestrial ecosystem. Through a memorandum of understanding, the OSM and the U.S. Department of Energy (DOE) have decided to investigate reclaiming and afforesting these lands for the purpose of mitigating the negative effects of anthropogenic carbon dioxide in the atmosphere. This study determined the carbon sequestration potential of northern red oak (Quercus rubra L.), one of the major reclamation as well as commercial species, planted on West Virginia AML sites. Analyses were conducted to (1) calculate the total number of tons that can be stored, (2) determine the cost per ton to store carbon, and (3) calculate the profitability of managing these forests for timber production alone and for timber production and carbon storage together. The Forest Management Optimizer (FORMOP) was used to simulate growth data on diameter, height, and volume for northern red oak. Variables used in this study included site indices ranging from 40 to 80 (base age 50), thinning frequencies of 0, 1, and 2, thinning percentages of 20, 25, 30, 35, and 40, and a maximum rotation length of 100 years. Real alternative rates of return (ARR) ranging from 0.5% to 12.5% were chosen for the economic analyses. A total of 769,248 thinning and harvesting combinations, net present worths, and soil expectation values were calculated in this study. Results indicate that

  2. Traveltime and dispersion data, including associated discharge and water-surface elevation data, Kanawha River West Virginia, 1991

    Science.gov (United States)

    Wiley, J.B.

    1993-01-01

    This report presents results of a study by the U.S. Geological Survey, in cooperation with the Virginia Environmental Endowment, Marshall University Research Corporation, and the West Virginia Depart- ment of Environmental Protection, to evaluate traveltime of a soluble dye on the Kanawha River. The Kanawha River originates in south-central West Virginia and flows northwestward to the Ohio River. Knowledge of traveltime and dispersion of a soluble dye could help river managers mitigate effects of an accidental spill. Traveltime and dispersion data were collected from June 20 through July 4, 1991, when river discharges decreased from June 24 through July 3, 1991. Daily mean discharges decreased from 5,540 ft 3/s on June 24 to 2,790 ft3/s on July 2 at Kanawha Falls and from 5,680 ft3/s on June 24 to 3,000 ft3/s on July 2 at Charleston. Water-surface elevations in regulated pools indicated a loss of water storage during the period. A spill at Gauley Bridge under similar streamflow conditions of this study is estimated to take 15 days to move beyond Winfield Dam. Estimated time of passage (elapsed time at a particular location) at Marmet Dam and Winfield Dam is approximately 2.5 days and 5.5 days, respectively. The spill is estimated to spend 12 days in the Winfield pool.

  3. New approach to the reclamation of the old flotation tailings in Bor

    Directory of Open Access Journals (Sweden)

    Dožić Stevan

    2010-01-01

    Full Text Available The old flotation tailings of the Bor copper mine have not been reclaimed for several decades, although it is a serious threat to the environment, especially to some parts of the town. To date, there have been no efficacious attempts of solving the problem by indirect rehabilitation, only several cases of direct reclamation. This paper presents some results of the experiment established on a part of the tailings in the vicinity of the town, where various variants of meliorated and sterile substrates were applied in the biological reclamation with several tree and grass species. The analysis shows that, in the rehabilitation of sterile substrate of the copper mine, it is possible to grow several woody species. The best results were achieved by the species that were planted in the fertile soil layer on the sterile copper mine substrate, and on the mixture of soil and waste. Among the woody species, Robinia pseudoaccacia, Fraxinus excelsior and Acer pseudoplatanus showed the best survival percent, growth, and physiological vitality and the poorest were spruce and common oak.

  4. Investigation of the selected properties of dusts from the reclamation of spent sands with bentonite

    Directory of Open Access Journals (Sweden)

    J. Kamińska

    2011-10-01

    Full Text Available The investigation results of the selected properties of dusts generated during the mechanical reclamation of spent sands with bentonite as well as dusts from the dedusting system of sand processing plant are presented in the hereby paper. Investigations were performed with regard to determination conditions allowing to pelletise dusts in the bowl granulator. The verified methods of testing physical and chemical dust properties such as: specific density, bulk density of loosely put materials and apparent density of compacted materials together with their corresponding porosity, ignition losses and pH values, were applied. Granular composition of dusts generated during abrasion of spent binding materials in mechanical dry reclamation processes of spent sands with bentonite and coal dusts were performed by the laser diffraction analysis, allowing to broaden the measuring range of particle diameters. The optimal wetting agent content (in this case water at which the dust-water mixture obtains the best strength properties – after compacting by means of the standard moulder’s rammer – was determined.

  5. REM-3D Reference Datasets: Reconciling large and diverse compilations of travel-time observations

    Science.gov (United States)

    Moulik, P.; Lekic, V.; Romanowicz, B. A.

    2017-12-01

    A three-dimensional Reference Earth model (REM-3D) should ideally represent the consensus view of long-wavelength heterogeneity in the Earth's mantle through the joint modeling of large and diverse seismological datasets. This requires reconciliation of datasets obtained using various methodologies and identification of consistent features. The goal of REM-3D datasets is to provide a quality-controlled and comprehensive set of seismic observations that would not only enable construction of REM-3D, but also allow identification of outliers and assist in more detailed studies of heterogeneity. The community response to data solicitation has been enthusiastic with several groups across the world contributing recent measurements of normal modes, (fundamental mode and overtone) surface waves, and body waves. We present results from ongoing work with body and surface wave datasets analyzed in consultation with a Reference Dataset Working Group. We have formulated procedures for reconciling travel-time datasets that include: (1) quality control for salvaging missing metadata; (2) identification of and reasons for discrepant measurements; (3) homogenization of coverage through the construction of summary rays; and (4) inversions of structure at various wavelengths to evaluate inter-dataset consistency. In consultation with the Reference Dataset Working Group, we retrieved the station and earthquake metadata in several legacy compilations and codified several guidelines that would facilitate easy storage and reproducibility. We find strong agreement between the dispersion measurements of fundamental-mode Rayleigh waves, particularly when made using supervised techniques. The agreement deteriorates substantially in surface-wave overtones, for which discrepancies vary with frequency and overtone number. A half-cycle band of discrepancies is attributed to reversed instrument polarities at a limited number of stations, which are not reflected in the instrument response history

  6. Jiangsu coastal highland reclamation and its wetland ecological construction-a case analysis of the Tiaozini reclamation project

    Science.gov (United States)

    Yu, Meixiu; Xu, Xianghong

    2017-04-01

    Reclamation is one potential solution for the increasing demand of new land for living and development. In past centuries, many coastal countries, such as the Netherlands, UK, Japan, South Korea and Singapore, had exploited extensively sea enclosing and reclamation fordefense against storm surges,agricultural and industrial development, as well as for coastal city expansion along the coast. China has continuously reclaimed coastal sea areas from the 1950s. With rapid economic development and increasing population in coastal areas during recent decades, reclamation has been regarded as an effective measure to resolve the land shortage as cities and industries expand, particularly in South-East coastal areas. Jiangsu province, located in East China, has a similar amount of land territory area to the Netherlands, however, its population is almost fivefold instead. Since its coastal area generates large amounts of tidal flat resources due to its unique hydrodynamic and geomorphic conditions, coastal reclamation plays a vital role in guaranteeing the food security for the Jiangsu Province or even the whole nation. The Tiaozini Reclamation Project (TRP), located between N32.720°-32.882°, E120.894°-120.969°, in Jianggang county of Jiangsu coastal region, with an area of 6,746ha, was reclaimed along the prograding muddy silt coast in 2012. It should be noted that the TRP was reclaimed from theoretical bathymetrical datum of about 4.6m. It is estimated that the shoreline moves towards the sea at a rate of 100m/year and the tidal flat raises at a rate of 5 10 cm/year respectively because of the external tidal flat being continually prograding and drying. After finishing reclamation,the TRP develops with nature: for the dried tidal flat high land,developing ecological agriculture after integrated soil improvement with reducing salt and cultivating fertilizer; for the drying tidal flat,developing ecological fishery by inceasing artificial wetland area; for lower tidal flat

  7. Traveltime Dispersion in an Isotropic Elastic Mantle: Dominance of the Lower Mantle Signal in Differential-frequency Time Residuals

    Science.gov (United States)

    Schuberth, B. S. A.; Zaroli, C.; Nolet, G.

    2014-12-01

    We study wavefield effects in elastic isotropic 3-D seismic structures derived from the temperature field of a high resolution mantle circulation model. More specifically, we quantify the structural dispersion of traveltime residuals of direct P- and S-waves in a model with realistic length-scales and magnitudes of the variations in seismic velocities and density. 3-D global wave propagation is simulated using a spectral element method, and traveltime residuals are measured in four different frequency bands by cross-correlation of 3-D and 1-D synthetic waveforms. Intrinsic (dissipative) attenuation is deliberately neglected, so that any variation of traveltimes with frequency can be attributed to structural effects. Additional simulations are performed for a model in which 3-D structure is removed in the upper 800 km to isolate the dispersion signal of the lower mantle. One question that we address is whether the structural length-scales inherent to a vigorously convecting mantle give rise to significant body-wave dispersion. In our synthetic dataset, the difference between long-period and short-period traveltime residuals generally increases with increasing short-period residual. However, we do not find an exact linear dependence, and in case of P-waves even non-monotonic behaviour. At largest short-period residuals, average dispersion is on the order of 2 s for both P- and S-waves and even larger when structure is confined to the lower mantle. Dispersion also appears to be asymmetric; that is, larger for negative than for positive residuals. The standard deviations of both P- and S-wave residuals also increase with increasing period and we discuss possible explanations for this behaviour. Overall, wavefield effects in both models are generally stronger for P-waves than for S-waves at the same frequencies. We also find that for certain combinations of periods, the difference between the respective residuals is very similar between the "whole mantle" and the "lower

  8. Preliminary Research on Granulation Process of Dust Waste from Reclamation Process of Moulding Sands with Furan Resin

    Directory of Open Access Journals (Sweden)

    J. Kamińska

    2012-09-01

    Full Text Available The results of investigations of the granulation process of foundry dusts generated in the dry mechanical reclamation process of usedsands, where furan resins were binders are presented in the paper. Investigations concerned producing of granules of the determineddimensions and strength parameters.Granules were formed from the dusts mixture consisting in 50 mass% of dusts obtained after the reclamation of the furane sands and in50 mass % of dusts from sands with bentonite. Dusts from the bentonite sands with water were used as a binder allowing the granulation of after reclamation dusts from the furane sands.The following parameters of the ready final product were determined: moisture content (W, shatter test of granules (Wz performeddirectly after the granulation process and after 1, 3, 5, 10 days and nights of seasoning, water-resistance of granules after 24 hours of being immersed in water, surface porosity ep and volumetric porosity ev. In addition the shatter test and water-resistance of granulate dried at a temperature of 105oC were determined.Investigations were performed at the bowl angle of inclination 45o, for three rotational speeds of the bowl being: 10, 15, 20 rpm.For the speed of 10 rpm the granulation tests of dusts mixture after the preliminary mixing in the roller mixer and with the addition ofwater-glass in the amount of 2% in relation to the amount of dust were carried out.The obtained results indicate that the granulator allows to obtain granules from dusts originated from the reclamations of mouldingsands with the furane resin with an addition of dusts from the bentonite sands processing plants.

  9. Water, Energy and Carbon Balance Research: Recovery Trajectories For Oil Sands Reclamation and Disturbed Watersheds in the Western Boreal Forest

    Science.gov (United States)

    Petrone, R. M.; Carey, S. K.

    2014-12-01

    The Oil Sand Region (OSR) of North-Central Alberta exists within the sub-humid Boreal Plains (BP) ecozone, with a slight long-term moisture deficit regime. Despite this deficit, the BP is comprised of productive wetland and mixed wood (aspen and conifer dominated) forests. Reclamation activities are now underway at a large number of surface mining operations in the OSR, where target ecosystems are identified, soil prescriptions placed and commercial forest species planted. Some watersheds have been created that now contain wetlands. However, recent work in the BP suggests that over time wetlands supply moisture for the productivity of upland forests. Thus, water use of reclaimed forests is going to be critical in determining the sustainability of these systems and adjacent wetlands, and whether in time, either will achieve some form of equivalent capability that will allow for certification by regulators. A critical component in the success of any reclamation is that sufficient water is available to support target ecosystems through the course of natural climate cycles in the region. Water Use Efficiency (WUE), which links photosynthesis (GEP) with water use (Evapotranspiration (ET)), provides a useful metric to compare ecosystems and evaluate their utilization of resources. In this study, 41 site years of total growing season water and carbon flux data over 8 sites (4 reclamation, 4 regeneration) were evaluated using eddy covariance micrometeorological towers. WUE shows clear discrimination among ecosystem types as aspen stands assimilate more carbon per unit weight of water than conifers. WUEs also change with time as ecosystems become more effective at transpiring water through plant pathways compared with bare-soil evaporation, which allows an assessment of ability to limit water loss without carbon uptake. In addition, clonal rooting systems allow aspen forests to recover quicker after disturbance than reclamation sites in terms of their WUE. For reclamation

  10. Reclamation of plutonium from pyrochemical processing residues

    International Nuclear Information System (INIS)

    Gray, L.W.; Gray, J.H.; Holcomb, H.P.; Chostner, D.F.

    1987-04-01

    Savannah River Laboratory (SRL), Savannah River Plant (SRP), and Rocky Flats Plant (RFP) have jointly developed a process to recover plutonium from molten salt extraction residues. These NaCl, KCL, and MgCl 2 residues, which are generated in the pyrochemical extraction of 241 Am from aged plutonium metal, contain up to 25 wt % dissolved plutonium and up to 2 wt % americium. The overall objective was to develop a process to convert these residues to a pure plutonium metal product and discardable waste. To meet this objective a combination of pyrochemical and aqueous unit operations was used. The first step was to scrub the salt residue with a molten metal (aluminum and magnesium) to form a heterogeneous ''scrub alloy'' containing nominally 25 wt % plutonium. This unit operation, performed at RFP, effectively separated the actinides from the bulk of the chloride salts. After packaging in aluminum cans, the ''scrub alloy'' was then dissolved in a nitric acid - hydrofluoric acid - mercuric nitrate solution at SRP. Residual chloride was separated from the dissolver solution by precipitation with Hg 2 (NO 3 ) 2 followed by centrifuging. Plutonium was then separated from the aluminum, americium and magnesium using the Purex solvent extraction system. The 241 Am was diverted to the waste tank farm, but could be recovered if desired

  11. Progress with the reclamation of saline soils in Peru

    International Nuclear Information System (INIS)

    Estrada, J.A.

    1983-01-01

    The present report is the result of five years' experimental work at the Costa Regional Development Institute (IRD-Costa), based in Canete, Lima, Peru, on the reclamation of land affected by salts and hence of seriously limited agricultural value (production lower than 50%). A reclamation method combining surface and at depth washing with artificial drainage of excess water has been tried out and a method of nutrition has been developed which is based on tonification of the seeds before sowing. The results obtained are rather encouraging, so the method looks very promising, especially as it also makes for considerable savings in fertilizers (some 20% less) and for better yields per unit area. Once the ionic behaviour of this method has been studied by means of radioisotopes a large contribution will have been made towards alleviating the problem of saline soils. (author)

  12. DU Processing Efficiency and Reclamation: Plasma Arc Melting

    Energy Technology Data Exchange (ETDEWEB)

    Imhoff, Seth D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Aikin, Jr., Robert M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Swenson, Hunter [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Solis, Eunice Martinez [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-09-26

    The work described here corresponds to one piece of a larger effort to increase material usage efficiency during DU processing operations. In order to achieve this goal, multiple technologies and approaches are being tested. These technologies occupy a spectrum of technology readiness levels (TRLs). Plasma arc melting (PAM) is one of the technologies being investigated. PAM utilizes a high temperature plasma to melt materials. Depending on process conditions, there are potential opportunities for recycling and material reclamation. When last routinely operational, the LANL research PAM showed extremely promising results for recycling and reclamation of DU and DU alloys. The current TRL is lower due to machine idleness for nearly two decades, which has proved difficult to restart. This report describes the existing results, promising techniques, and the process of bringing this technology back to readiness at LANL.

  13. The legal framework for wellsite abandonment and reclamation in Alberta

    International Nuclear Information System (INIS)

    Gilmour, B.S.

    1997-01-01

    The legislative framework for wellsite reclamation in Alberta was discussed. The legal requirements that impact on wellsite abandonment and reclamation, with emphasis on the Oil and Gas Conservation Act (OGCA) and the Environmental Protection and Enhancement Act (EPEA) were described. In 1994, the Orphan Well fund was established to ensure that wells are properly abandoned in those cases where participants are insolvent. The fund is financed by the petroleum industry. The regulatory requirements for wellsite abandonment are found in the OGCA and the Well Abandonment Guide 20 which provides explicit procedures for both open-hole and cased-hole abandonment. Liability for contaminated sites exists under the contaminated sites provision of the EPEA. Amendments to the OGCA provide for more supervision over licence transfers and the granting of licences to first-time licensees

  14. 30 CFR 947.827 - Special performance standards-coal processing plants and support facilities not located at or...

    Science.gov (United States)

    2010-07-01

    ... mining and reclamation operations which include the operation of coal processing plants and support... plants and support facilities not located at or near the minesite or not within the permit area for a mine. 947.827 Section 947.827 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT...

  15. 30 CFR 912.827 - Special performance standards-coal processing plants and support facilities not located at or...

    Science.gov (United States)

    2010-07-01

    ... mining and reclamation operations which includes the operation of coal processing plants and support... plants and support facilities not located at or near the minesite or not within the permit area for a mine. 912.827 Section 912.827 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT...

  16. 30 CFR 922.827 - Special performance standards-coal processing plants and support facilities not located at or...

    Science.gov (United States)

    2010-07-01

    ... mining and reclamation operations which include the operation of coal processing plants and support... plants and support facilities not located at or near the minesite or not within the permit area for a mine. 922.827 Section 922.827 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT...

  17. 30 CFR 937.827 - Special performance standards-coal processing plants and support facilities not located at or...

    Science.gov (United States)

    2010-07-01

    ... mining and reclamation operations which include the operation of coal processing plants and support... plants and support facilities not located at or near the minesite or not within the permit area for a mine. 937.827 Section 937.827 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT...

  18. 30 CFR 910.827 - Special performance standards-coal processing plants and support facilities not located at or...

    Science.gov (United States)

    2010-07-01

    ... mining and reclamation operations which includes the operation of coal processing plants and support... plants and support facilities not located at or near the minesite or not within the permit area for a mine. 910.827 Section 910.827 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT...

  19. Study for reclamation of land occupied by solar evaporation pond at UCIL, Bhopal, India.

    Science.gov (United States)

    George, K V; Patil, M R; Swaminathan, R

    2001-12-01

    Solar Evaporation Ponds (SEP) were used by Union Carbide India Limited (UCIL), Bhopal for storage of wastewater containing high concentrations of inorganic chemicals especially chlorides. Area occupied by the SEPs had to be recovered due to closure of the plant. A prerequisite to the reclamation of the SEP area is a study of adjoining soil and groundwater, which may be contaminated due to possible leakage in the pond. Surface soil, subsurface soil and groundwater samples were collected and analysed. The electrical conductivity method was employed inside the pond to test for leak in the geo-membrane liner. This was further confirmed by physically checking the liners. Based on the wet period, total rainfall and evaporation rate of the region, drying of remaining wastewater by spreading in dry ponds followed by pond dismantling was scheduled.

  20. Plutonium--uranium partitioning; alternate flowsheet Plutonium Reclamation Facility. [SEPHIS

    Energy Technology Data Exchange (ETDEWEB)

    Fort, L.A.

    1975-12-01

    The SEPHIS computer program was used to predict the transient and steady-state concentrations in a stage-wise scheme for the Pu reclamation solvent extraction system. With the aid of the computer an alternative flowsheet for Pu--U partitioning was constructed. The goal of the alternative program is to reduce Pu losses from the initial stripping column and reduce the quantity of Pu-bearing wastes from the solvent extraction system. (JSR)

  1. Calculating qP-wave traveltimes in 2-D TTI media by high-order fast sweeping methods with a numerical quartic equation solver

    Science.gov (United States)

    Han, Song; Zhang, Wei; Zhang, Jie

    2017-09-01

    A fast sweeping method (FSM) determines the first arrival traveltimes of seismic waves by sweeping the velocity model in different directions meanwhile applying a local solver. It is an efficient way to numerically solve Hamilton-Jacobi equations for traveltime calculations. In this study, we develop an improved FSM to calculate the first arrival traveltimes of quasi-P (qP) waves in 2-D tilted transversely isotropic (TTI) media. A local solver utilizes the coupled slowness surface of qP and quasi-SV (qSV) waves to form a quartic equation, and solve it numerically to obtain possible traveltimes of qP-wave. The proposed quartic solver utilizes Fermat's principle to limit the range of the possible solution, then uses the bisection procedure to efficiently determine the real roots. With causality enforced during sweepings, our FSM converges fast in a few iterations, and the exact number depending on the complexity of the velocity model. To improve the accuracy, we employ high-order finite difference schemes and derive the second-order formulae. There is no weak anisotropy assumption, and no approximation is made to the complex slowness surface of qP-wave. In comparison to the traveltimes calculated by a horizontal slowness shooting method, the validity and accuracy of our FSM is demonstrated.

  2. Blasting as a method for abandoned mine land reclamation

    International Nuclear Information System (INIS)

    Workman, J.L.; Fletcher, L.R.

    1991-01-01

    Blasting methods have been proposed for reclaiming abandoned underground coal mine sites having unstable conditions. The objective of blasting is twofold: the permanent stabilization of an area by the collapse of underground workings to prevent any future subsidence, and the use of blasting to close existing sinkholes. This paper presents the results of two research projects funded by the Bureau of Mines Abandoned Mine Land Research Program to investigate the feasibility of blasting to assist in the reclamation of shallow abandoned coal mine sites. Blasting tests were conducted at Beulah, North Dakota and at Scobey, Montana, involving different configurations. The first test was a 10-acre site where blasting was used to collapse regular room and pillar panels for which good mine layout information was available. The second test involved a one acre site containing very irregular workings for which there was little available information. Finally, blasting techniques were used to close 13 individual vertical openings. The depths to the coal seams were 60 feet or less at all sites. When blasting for Abandoned Mine Land Reclamation, material must be cast downward into the abandoned developments or laterally into the sinkhole. Designs based on cratering concepts and spherical charges worked well. The blasting techniques successfully collapsed and stabilized the test areas. Cost of reclamation for the two test sites are presented. Data from blast vibration monitoring are presented because control of vibrations is of concern when mitigation efforts are conducted near homes

  3. Staunton 1 reclamation demonstration project. Aquatic ecosystems. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Vinikour, W. S.

    1981-02-01

    To provide long-term indications of the potential water quality improvements following reclamation efforts at the Staunton 1 Reclamation Demonstration Project, macroinvertebrates were collected from three on-site ponds and from the receiving stream (Cahokia Creek) for site drainage. Implications for potential benthic community differences resulting from site runoff were disclosed, but macroinvertebrate diversity throughout Cahokia Creek was limited due to an unstable, sandy substrate. The three ponds sampled were the New Pond, which was created as part of the reclamation activities; the Shed Pond, which and the Old Pond, which, because it was an existing, nonimpacted pond free of site runoff, served as a control. Comparisons of macroinvertebrates from the ponds indicated the potential for the New Pond to develop into a productive ecosystem. Macroinvertebrates in the New Pond were generally species more tolerant of acid mine drainage conditions. However, due to the present limited faunal densities and the undesirable physical and chemical characteristics of the New Pond, the pond should not be stocked with fish at this time.

  4. Neutron activation, k0-- method, as a tool for Phytoremediation studies and reclamation of degraded areas

    International Nuclear Information System (INIS)

    Uemura, George; Menezes, Maria Angela de Barros C.

    2007-01-01

    Phytoremediation is a technology that can be considered as a relatively recent one, although it is based on knowledge that has been gathered and accumulated for a long time. One advantage of phytoremediation is its relatively low cost, but, as it must rely on plant growth, its results might be quite slow to be achieved, specially in countries with temperate climate, which is not the case of vast areas of Brazilian territory. One of the aims of phytoremediation is the search of plants that are hyperaccumulators, i.e., that are capable of accumulating pollutants and/or contaminants in high concentrations, of which the fern Pteris vittata is a fine example, considering arsenic accumulation. The possibilities of exploring Brazilian native flora for this purpose demand no further comments. The reclamation of degraded areas demands might not necessarily rely only on species and/or varieties that are hyperaccumulators, but also on taxa that are resistant to a given pollutant or a mixture of pollutants. In this case, a precise analysis of the environment is fundamental, specially to ascertain, for sure, that some toxic element is not present. In this work, species known to accumulate arsenic from Brazilian native flora like Indian mustard (Brassica juncea) and Mirabilis jalapa were grown and exposed to arsenic. After that, they were lyophilised and analysed by means of the k 0- standardization method using the TRIGA MARK I IPR-R1 reactor at CDTN/CNEN. Certified reference material were also analysed to verify the accuracy of the method. The advantages of neutron activation, k 0- method, a multi-elemental analysis technique, in phytoremediation and reclamation of degraded areas, are discussed in the present paper. (author)

  5. Efficient evaluation of shortest travel-time path queries through spatial mashups

    KAUST Repository

    Zhang, Detian; Chow, Chi-Yin; Liu, An; Zhang, Xiangliang; Ding, Qingzhu; Li, Qing

    2017-01-01

    In the real world, the route/path with the shortest travel time in a road network is more meaningful than that with the shortest network distance for location-based services (LBS). However, not every LBS provider has adequate resources to compute/estimate travel time for routes by themselves. A cost-effective way for LBS providers to estimate travel time for routes is to issue external route requests to Web mapping services (e.g., Google Maps, Bing Maps, and MapQuest Maps). Due to the high cost of processing such external route requests and the usage limits of Web mapping services, we take the advantage of direction sharing, parallel requesting and waypoints supported by Web mapping services to reduce the number of external route requests and the query response time for shortest travel-time route queries in this paper. We first give the definition of sharing ability to reflect the possibility of sharing the direction information of a route with others, and find out the queries that their query routes are independent with each other for parallel processing. Then, we model the problem of selecting the optimal waypoints for an external route request as finding the longest simple path in a weighted complete digraph. As it is a MAX SNP-hard problem, we propose a greedy algorithm with performance guarantee to find the best set of waypoints in an external route request. We evaluate the performance of our approach using a real Web mapping service, a real road network, real and synthetic data sets. Experimental results show the efficiency, scalability, and applicability of our approach.

  6. Amplitude calculations for 3D Gaussian beam migration using complex-valued traveltimes

    International Nuclear Information System (INIS)

    Bleistein, Norman; Gray, Samuel H

    2010-01-01

    Gaussian beams are often used to represent Green's functions in three-dimensional Kirchhoff-type true-amplitude migrations because such migrations made using Gaussian beams yield superior images to similar migrations using classical ray-theoretic Green's functions. Typically, the integrand of a migration formula consists of two Green's functions—each describing propagation to the image point—one from the source and the other from the receiver position. The use of Gaussian beams to represent each of these Green's functions in 3D introduces two additional double integrals when compared to a Kirchhoff migration using ray-theoretic Green's functions, thereby adding a significant computational burden. Hill (2001 Geophysics 66 1240–50) proposed a method for reducing those four integrals to two, compromising slightly on the full potential quality of the Gaussian beam representations for the sake of more efficient computation. That approach requires a two-dimensional steepest descent analysis for the asymptotic evaluation of a double integral. The method requires evaluation of the complex traveltimes of the Gaussian beams as well as the amplitudes of the integrands at the determined saddle points. In addition, it is necessary to evaluate the determinant of a certain (Hessian) matrix of second derivatives. Hill (2001 Geophysics 66 1240–50) did not report on this last part; thus, his proposed migration formula is kinematically correct but lacks correct amplitude behavior. In this paper, we derive a formula for that Hessian matrix in terms of dynamic ray tracing quantities. We also show in a simple example how the integral that we analyze here arises in a true amplitude migration formula

  7. Efficient evaluation of shortest travel-time path queries through spatial mashups

    KAUST Repository

    Zhang, Detian

    2017-01-07

    In the real world, the route/path with the shortest travel time in a road network is more meaningful than that with the shortest network distance for location-based services (LBS). However, not every LBS provider has adequate resources to compute/estimate travel time for routes by themselves. A cost-effective way for LBS providers to estimate travel time for routes is to issue external route requests to Web mapping services (e.g., Google Maps, Bing Maps, and MapQuest Maps). Due to the high cost of processing such external route requests and the usage limits of Web mapping services, we take the advantage of direction sharing, parallel requesting and waypoints supported by Web mapping services to reduce the number of external route requests and the query response time for shortest travel-time route queries in this paper. We first give the definition of sharing ability to reflect the possibility of sharing the direction information of a route with others, and find out the queries that their query routes are independent with each other for parallel processing. Then, we model the problem of selecting the optimal waypoints for an external route request as finding the longest simple path in a weighted complete digraph. As it is a MAX SNP-hard problem, we propose a greedy algorithm with performance guarantee to find the best set of waypoints in an external route request. We evaluate the performance of our approach using a real Web mapping service, a real road network, real and synthetic data sets. Experimental results show the efficiency, scalability, and applicability of our approach.

  8. Hydrogen sulfide booster compressors for HWP Manuguru - oil reclamation study - BHEL experience (Paper No. 5.2)

    International Nuclear Information System (INIS)

    Godbole, A.; Santanam, N.; Murthy, T.S.R.

    1992-01-01

    BHEL undertook the development of hydrogen sulphide booster compressor with a view to indigenise this most critical equipment in a heavy water plant. Throughout the design, manufacture and shop testing of these booster compressors BHEL had close interaction with Heavy Water Board. This paper describes the problems faced during commissioning of compressors at KCR -Manuguru such as deficiencies in the sizing of LP seal oil drain, development of a process for reclamation of oil and development of alternate sealing arrangement, etc. (author). 1 tab., 4 figs

  9. Traveltime dispersion in an isotropic elastic mantle: strong lower-mantle signal in differential-frequency residuals

    Science.gov (United States)

    Schuberth, Bernhard S. A.; Zaroli, Christophe; Nolet, Guust

    2015-12-01

    We study wavefield effects of direct P- and S-waves in elastic and isotropic 3-D seismic structures derived from the temperature field of a high-resolution mantle circulation model. More specifically, we quantify the dispersion of traveltime residuals caused by diffraction in structures with dynamically constrained length scales and magnitudes of the lateral variations in seismic velocities and density. 3-D global wave propagation is simulated using a spectral element method. Intrinsic attenuation (i.e. dissipation of seismic energy) is deliberately neglected, so that any variation of traveltimes with frequency can be attributed to structural effects. Traveltime residuals are measured at 15, 22.5, 34 and 51 s dominant periods by cross-correlation of 3-D and 1-D synthetic waveforms. Additional simulations are performed for a model in which 3-D structure is removed in the upper 800 km to isolate the dispersion signal of the lower mantle. We find that the structural length scales inherent to a vigorously convecting mantle give rise to significant diffraction-induced body-wave traveltime dispersion. For both P- and S-waves, the difference between long-period and short-period residuals for a given source-receiver pair can reach up to several seconds for the period bands considered here. In general, these `differential-frequency' residuals tend to increase in magnitude with increasing short-period delay. Furthermore, the long-period signal typically is smaller in magnitude than the short-period one; that is, wave-front healing is efficient independent of the sign of the residuals. Unlike the single-frequency residuals, the differential-frequency residuals are surprisingly similar between the `lower-mantle' and the `whole-mantle' model for corresponding source-receiver pairs. The similarity is more pronounced in case of S-waves and varies between different combinations of period bands. The traveltime delay acquired in the upper mantle seems to cancel in these differential

  10. ASSESSMENT OF VEGETATION COVER ON SODA WASTE DISPOSAL SITE AT JANIKOWO, FOLLOWING 13-YEAR-LONG RECLAMATION

    Directory of Open Access Journals (Sweden)

    Kazimierz Henryk Dyguś

    2014-10-01

    Full Text Available The results are presented of vegetation survey on the alkaline and saline soda waste disposal site at Janikowo Soda Plant near Toruń (central Poland. The site was subject to reclamation using diverse techniques including sewage sludge and ash, starting from the year 2000 onwards. The survey was made to evaluate the status of plant succession as well as stability and diversity of vegetation cover. The vegetation was inventoried using the cover-frequency method, on a 10 x 10 m quadrat samples randomly distributed over the reclaimed area. Communities were classified using the Central-European approach by Braun-Blanquet (1964. In 2013, the vegetation was well established and provided a dense cover of the substrate. 108 plant species were found compared to some 5–8 plants which arrived spontaneously until the year 2000. Species richness increased 15 fold since the year when reclamation started. Species of graminoid and Asteraceae families prevailed in most patches of local vegetation. The vegetation cover on sites treated with a mixt of power plant ash and sewage sludge was less stable and less diverse than that on sites where sewage sludge only was applied. Annuals and biennials dominated in the vegetation on ash grounds while more competitive perennials prevailed on sewage sludge substrates. On the latter substrates there develop plant communities classified as an association of smooth meadow grass and common yarrow Poa pratensis-Achillea millefolium, whose species combination closely resembles that of seminatural fresh meadows. On the ash grounds, a variety of associations of ruderal plants were found with dominating Loesel mustard and common mugwort Sisymbrium loeselii-Artemisia vulgaris. Phytoindicatory methods using Ellenberg values have shown that waste substrates contained increased salt concentrations, however, there was no indication of increased heavy metal contents, as no plants tolerating excessive amounts of heavy metals were

  11. Frequency Dependence of Helioseismic Measurements of the Center-to-Limb Effect and Flow-induced Travel-time Shifts

    Science.gov (United States)

    Chen, Ruizhu; Zhao, Junwei

    2018-02-01

    Time–distance helioseismology measures acoustic travel times to infer the structure and flow field of the solar interior; however, both the mean travel times and the travel-time shifts suffer systematic center-to-limb variations, which complicate the interpretation and inversions of the time–distance measurements. In particular, the center-to-limb variation in travel-time shifts (CtoL effect) has a significant impact on the inference of the Sun’s meridional circulation, and needs to be removed from the helioseismic measurements, although the observational properties and the physical cause of the CtoL effect have yet to be investigated. In this study, we measure the CtoL effect in the frequency domain using Doppler-velocity data from the Solar Dynamics Observatory/Helioseismic and Magnetic Imager, and study its properties as a function of disk-centric distance, travel distance, and frequency of acoustic waves. It is found that the CtoL effect has a significant frequency dependence—it reverses sign at a frequency around 5.4 mHz and reaches maximum at around 4.0 mHz before the sign reversal. The tendency of frequency dependence varies with disk-centric distance in a way that both the sign-reversal frequency and the maximum-value frequency decrease closer to the limb. The variation tendency does not change with travel distance, but the variation magnitude is approximately proportional to travel distance. For comparison, the flow-induced travel-time shifts show little frequency dependence. These observational properties provide more clues on the nature of the CtoL effect, and also possibly lead to new ways of effect-removal for a more robust determination of the deep meridional flow.

  12. Experimental verification of the energetic model of the dry mechanical reclamation process

    Directory of Open Access Journals (Sweden)

    R. Dańko

    2008-04-01

    Full Text Available The experimental results of the dry mechanical reclamation process, which constituted the bases for the verification of the energetic model of this process, developed by the author on the grounds of the Rittinger’s deterministic hypothesis of the crushing process, are presented in the paper. Used foundry sands with bentonite, with water-glass from the floster technology and used sands with furan FL 105 resin were used in the reclamation tests. In the mechanical and mechanical-cryogenic reclamation a wide range of time variations and reclamation conditions influencing intensity of the reclamation process – covering all possible parameters used in industrial devices - were applied. The developed theoretical model constitutes a new tool allowing selecting optimal times for the reclamation treatment of the given spent foundry sand at the assumed process intensity realized in rotor reclaimers - with leaves or rods as grinding elements mounted horizontally on the rotor axis.

  13. Conservation and reclamation at Alberta's mineable oil sands

    Energy Technology Data Exchange (ETDEWEB)

    Purdy, B.; Richens, T. [Alberta Environment, Edmonton, AB (Canada)

    2010-07-01

    The regulatory foundation for oil sands in this region is established by the Energy Resources Conservation Board, Environmental Protection and Enhancement Act (EPEA), as well as the Water Act. This presentation discussed the regulatory foundation for conservation and reclamation in the mineable oil sands region. EPEA requirements and conservation objectives were identified. EPEA conservation and reclamation requirements stipulate that an operator must conserve and reclaim and obtain a reclamation certificate. EPEA approvals that were presented compared prescriptive standards versus meeting outcomes at certification. Operational and management challenges as well as the role of research networks and multi-stakeholder organizations were also addressed. Challenge facing the industry include progressive reclamation; tailings management and process-affected water; reclamation certification; integrated landscapes; soil handling and revegetation and monitoring and research. The presentation demonstrated that reclamation begins with mine planning and ends with certification. figs.

  14. Developing the Guidelines for Reclamation to Forest Vegetation in the Athabasca Oil Sands Region

    Energy Technology Data Exchange (ETDEWEB)

    Straker, J. [Integral Ecology Group Ltd., Victoria, BC (Canada); Cumulative Environmental Management Association, Fort McMurray, AB (Canada). Reclamation Working Group, Terrestrial Subgroup; Donald, G. [Donald Functional and Applied Ecology Inc., Victoria, BC (Canada); Cumulative Environmental Management Association, Fort McMurray, AB (Canada). Reclamation Working Group, Terrestrial Subgroup

    2010-07-01

    This paper discussed the development process behind and the structure of the Guidelines for Reclamation to Forest Vegetation in the Athabasca Oil Sands Region. The advances present in the second edition, published in 2010, were described relative to the first edition, which was published in 1998. Oils sands mining companies are mandated to use the manual under the Alberta Environmental Protection and Enhancement Act. The paper provided an overview of the structure of the second edition and presented the process used to develop the second edition. It also described the planning approaches for revegetative treatments and the planning guidance of overstory and understory species selection. The methods for evaluating revegetative success were also described with particular reference to plant community composition and soil salinity indicators as examples of indicator development. The goal of the manual is to provide guidance on re-establishing the vegetation component of upland ecosystems on reclaimed landscapes and on evaluating the success of the re-establishment, assuming that the reclaimed plant communities should have species characteristic of native plant communities in the region, that the trends of vegetation community and structure development on reclaimed land should be similar to native plant communities in the region, and that the reclaimed ecosystems should have development trajectories that satisfy land-use objectives and provide resilience against natural disturbances. 15 refs., 1 tab., 1 fig.

  15. The effect of mining on landscape ecological systems and land reclamation

    International Nuclear Information System (INIS)

    Stys, S.

    1991-01-01

    Coal mining causes serious disturbance of the environment. Basic principles for the reclamation of affected territories are discussed. The effects of mining on the socio-ecological landscape system, the agricultural and forestry aspects of reclamation technologies after surface mining and the factors affecting the way of reclamation are shown in a diagrammatic form. The attached photographs document the effect of mining on landscape devastation. (M.D.). 17 figs

  16. Fifth symposium on surface mining and reclamation. NCA/BCR coal conference and Expo IV

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-01-01

    The Fifth Symposium on Surface Mining and Reclamation, sponsored by the National Coal Association and Bituminous Coal Research, Inc., was held at the Kentucky Fair and Exposition Center, Louisville, Kentucky, October 18-20, 1977. Twenty-six papers from the proceedings have been entered individually into EDB and ERA. Topics covered include spoil bank revegetation, use of aerial photography, reclamation for row crop production, hydrology, computer programs related to this work, subirrigated alluvial valley floors, reclamation on steep slopes, mountain top removal, surface mine road design, successional processes involved in reclamation, land use planning, etc. (LTN)

  17. Sea Reclamation Status of Countries around the South China Sea from 1975 to 2010

    Directory of Open Access Journals (Sweden)

    Junjue Zhang

    2017-05-01

    Full Text Available As a way of turning sea into land for living space for humans, the actions of sea reclamation bring about significant benefits. Nevertheless, it is also an under-recognized threat to the environment and the marine ecosystem. Based on images in two periods, sea reclamation information of countries around the South China Sea was extracted from 1975 to 2010. The spatial state and driven forces of sea reclamation are then discussed. Results show that the overall strength of sea reclamation in the South China Sea was great. New reclaimed land added up to 3264 km2. Sea reclamation for fish farming was the main reclamation type and widely distributed in the whole area, especially on the coast from the Pearl River Delta to the Red River Delta, and the coast of Ca Mau Peninsula. Sea reclamation in China and Vietnam was rather significant, which occupies 80.6% of the total reclamation area. Singapore had the highest level of sea reclamation. New reclaimed land for fish farming holds a key role in China, Vietnam, and Indonesia, while new reclaimed land for construction and docks dominated in Malaysia, Singapore, and Brunei. Areas and use-type compositions of new reclaimed land in countries varied greatly due to the differences of economic factors, policy inclination, and landscapes in the respective countries.

  18. Influence of the Reclamation Process Intensity in the REGMAS Reclaimer on the Purification Degree of the High-silica Matrix

    Directory of Open Access Journals (Sweden)

    Skrzyński M.

    2016-03-01

    Full Text Available The investigation results of the reclamation of spent moulding sands with furfuryl resin are presented in this paper. The reclamation process was performed in the secondary reclamation chamber of the REGMAS 1.5 vibratory reclaimer. 70 kg portions of moulding sands, previously subjected to the primary reclamation and dedusting, were used. The secondary reclamation was performed in two stages: the first consisted of determining the reclaimer intensity at various reclamation times (5 min, 10 min and 15 min and various electrovibrator frequencies (40 Hz, 50 Hz and 60 Hz, the second consisted of determining the influence of additional crushing elements on the intensity of processes.

  19. Has anyone noticed that trees are not being planted any longer?

    Science.gov (United States)

    Walter D. Smith

    1980-01-01

    Trees provided the coal surface mining industry with a means of restoring the land's productivity at a minimum expense. Trees may still be included in the reclamation plan but tree planting in Ohio was drastically reduced by the 1972 Ohio Surface Mining and Reclamation Law. The basic reasons are categorized as technical, social and economic. The revegetation phase...

  20. Verification of the helioseismology travel-time measurement technique and the inversion procedure for sound speed using artificial data

    Energy Technology Data Exchange (ETDEWEB)

    Parchevsky, K. V.; Zhao, J.; Hartlep, T.; Kosovichev, A. G., E-mail: akosovichev@solar.stanford.edu [Stanford University, HEPL, Stanford, CA 94305 (United States)

    2014-04-10

    We performed three-dimensional numerical simulations of the solar surface acoustic wave field for the quiet Sun and for three models with different localized sound-speed perturbations in the interior with deep, shallow, and two-layer structures. We used the simulated data generated by two solar acoustics codes that employ the same standard solar model as a background model, but utilize different integration techniques and different models of stochastic wave excitation. Acoustic travel times were measured using a time-distance helioseismology technique, and compared with predictions from ray theory frequently used for helioseismic travel-time inversions. It is found that the measured travel-time shifts agree well with the helioseismic theory for sound-speed perturbations, and for the measurement procedure with and without phase-speed filtering of the oscillation signals. This testing verifies the whole measuring-filtering-inversion procedure for static sound-speed anomalies with small amplitude inside the Sun outside regions of strong magnetic field. It is shown that the phase-speed filtering, frequently used to extract specific wave packets and improve the signal-to-noise ratio, does not introduce significant systematic errors. Results of the sound-speed inversion procedure show good agreement with the perturbation models in all cases. Due to its smoothing nature, the inversion procedure may overestimate sound-speed variations in regions with sharp gradients of the sound-speed profile.

  1. A parallel competitive Particle Swarm Optimization for non-linear first arrival traveltime tomography and uncertainty quantification

    Science.gov (United States)

    Luu, Keurfon; Noble, Mark; Gesret, Alexandrine; Belayouni, Nidhal; Roux, Pierre-François

    2018-04-01

    Seismic traveltime tomography is an optimization problem that requires large computational efforts. Therefore, linearized techniques are commonly used for their low computational cost. These local optimization methods are likely to get trapped in a local minimum as they critically depend on the initial model. On the other hand, global optimization methods based on MCMC are insensitive to the initial model but turn out to be computationally expensive. Particle Swarm Optimization (PSO) is a rather new global optimization approach with few tuning parameters that has shown excellent convergence rates and is straightforwardly parallelizable, allowing a good distribution of the workload. However, while it can traverse several local minima of the evaluated misfit function, classical implementation of PSO can get trapped in local minima at later iterations as particles inertia dim. We propose a Competitive PSO (CPSO) to help particles to escape from local minima with a simple implementation that improves swarm's diversity. The model space can be sampled by running the optimizer multiple times and by keeping all the models explored by the swarms in the different runs. A traveltime tomography algorithm based on CPSO is successfully applied on a real 3D data set in the context of induced seismicity.

  2. Verification of the helioseismology travel-time measurement technique and the inversion procedure for sound speed using artificial data

    International Nuclear Information System (INIS)

    Parchevsky, K. V.; Zhao, J.; Hartlep, T.; Kosovichev, A. G.

    2014-01-01

    We performed three-dimensional numerical simulations of the solar surface acoustic wave field for the quiet Sun and for three models with different localized sound-speed perturbations in the interior with deep, shallow, and two-layer structures. We used the simulated data generated by two solar acoustics codes that employ the same standard solar model as a background model, but utilize different integration techniques and different models of stochastic wave excitation. Acoustic travel times were measured using a time-distance helioseismology technique, and compared with predictions from ray theory frequently used for helioseismic travel-time inversions. It is found that the measured travel-time shifts agree well with the helioseismic theory for sound-speed perturbations, and for the measurement procedure with and without phase-speed filtering of the oscillation signals. This testing verifies the whole measuring-filtering-inversion procedure for static sound-speed anomalies with small amplitude inside the Sun outside regions of strong magnetic field. It is shown that the phase-speed filtering, frequently used to extract specific wave packets and improve the signal-to-noise ratio, does not introduce significant systematic errors. Results of the sound-speed inversion procedure show good agreement with the perturbation models in all cases. Due to its smoothing nature, the inversion procedure may overestimate sound-speed variations in regions with sharp gradients of the sound-speed profile.

  3. Elliot Lake uranium mine reclamation, the first ten years

    International Nuclear Information System (INIS)

    Payne, R.A.

    2000-01-01

    In 1989, Rio Algom Limited finalized its plans for the closure and subsequent decommissioning of two of its then three operating mines in Elliot Lake as a result of market conditions. These two mines closed in August 1990. These mine closures had significant impacts. The principal mining operations of Rio Algom at that time were still in Elliot Lake and had been the very foundation of the company for about 40 years. The business impact on the Corporation was regarded as possibly severe. The resultant layoff of over 1,500 long-term, highly qualified, skilled and well-paid employees, a devastating blow to the affected employees and their families, would have a significant financial impact on the municipal economy, particularly as this announcement was seen as the first step in the early closure of all four operating mines in the region. At that time there was little precedence for such a high profile mine closure program and consequently the many unknowns relating to the mine decommissioning process, legislative requirements and society's expectations resulted in a perception of a significant yet ill-defined liability. In this atmosphere of understandable company, stakeholder and public concern, Rio Algom Limited embarked on what has turned out to be a long, rigorous, challenging yet ultimately reasonable and rewarding process of progressive reclamation of all its Elliot Lake mines, some ten in total (nine uranium, one copper). Over the past ten years, reclamation of all ten mines has been successfully completed, some $70 m plus has been expended in direct site reclamation works and the workforce has been reduced from over 2,500 to just 4. After ten years, the focus of attention is now on the long-term care, maintenance, monitoring and reporting required for the decommissioned mine sites, and the accomplishment of this in the best interests of all the stakeholders. (author)

  4. Reclamation of prime farmland following mineral sands mining in Virginia

    Energy Technology Data Exchange (ETDEWEB)

    Daniels, W.L.; Schroeder, P.D.; Nagle, S.M.; Zelazny, L.W.; Alley, M.M.

    1999-07-01

    Significant deposits of mineral sands were discovered in Virginia's Upper Coastal Plain in 1989. The Old Hickory deposit is the largest ore body in the state (>2,000 ha) and supports a productive rowcrop agriculture on prime farmlands. field experiments were installed on pilot-scale (25 m x 60 m) mining pits in the late summer of 1995 and replicated on an adjacent undisturbed area. Half of each mining pit was topsoiled (25 cm) while the remaining half was left as either (1) mixed tails/slimes or (2) re-graded subsoil over tails/slimes to simulate various pit closure scenarios. Both non-topsoiled areas received 112 Mg/ha of yard waste compost as a soil building amendment. The entire area was ripped/disked to ameliorate compaction and incorporate lime and fertilizer additions. The experiment was cropped through a wheat/soybeans/corn/cotton rotation over the 1995 to 1998 growing seasons. Taken as a whole, these combined results clearly indicate that mining and reclamation of these prime farmlands will lead to a substantial decrease in rowcrop productivity, at least over the initial years following pit closure and reclamation. For the rotation studied, post-mining productivity was estimated by this experiment to be reduced by 23%, 3%, 27%, and 20% for each crop (wheat/soybeans/corn/cotton) in sequence. For a given crop in a given year, response to topsoiling versus compost addition to the surface varied, and neither treatment appeared superior. Corn and cotton yields on the mined land treatments were reduced despite the application of irrigation. Cotton quality was also adversely affected by the mining reclamation treatments. Results of these controlled experiments are somewhat encouraging. However, the implementation of protocols will be complicated in practice if tailings and slimes cannot be re-blended to generate a reasonably uniform final reclaimed surface.

  5. Indian Creek-AML: Coal slurry reclamation (Kansas case history)

    International Nuclear Information System (INIS)

    Witthar, S.R.

    1998-01-01

    Black and Veatch, assisted by Jack Nawrot, developed conceptual and final designs and provided construction assistance to create grasslands and wetlands in order to reclaim an abandoned coal mine for the state of Kansas. The mine included spoils, a coal refuse dump, and slurry pond in the Indian Creek drainage basin in east central Kansas. The Indian Creek flowed from an off-site abandoned mine and through the coal slurry pond where its waters became more polluted. The intent of the reclamation project was to improve water quality and create a wildlife refuge. The coal refuse was covered and seeded with a diversity of vegetation including several grasses and legume. The slurry pond was developed into a series of large wetland cells to improve water quality. Prior to reclamation, the water leaving the site had a typical pH of 3.3, ranging from 2.4 to 5.6, an iron content which typically over 22 mg/L and ranging over 100 mg/L, and contained large amounts of coal slurry. The acid sediment in the slurry killed fish and caused visible damage to a new large concrete box culvert several miles downstream of the site. Post-reclamation water quality leaving the Indian Creek site showed immediate improvement even before vegetation was reestablished. The existing wetland treatment systems have been successfully treating water for over seven years with the pH of the water leaving the wetlands above 7 and soluble iron content less than 1 mg/L. Fish in the constructed wetlands support waterfowl which now nest onsite

  6. Quantification of intensive hybrid coastal reclamation for revealing its impacts on macrozoobenthos

    International Nuclear Information System (INIS)

    Yan, Jiaguo; Cui, Baoshan; Zheng, Jingjing; Xie, Tian; Wang, Qing; Li, Shanze

    2015-01-01

    Managing and identifying the sources of anthropogenic stress in coastal wetlands requires an in-depth understanding of relationships between species diversity and human activities. Empirical and experimental studies provide clear evidence that coastal reclamation can have profound impacts on marine organisms, but the focus of such studies is generally on comparative or laboratory research. We developed a compound intensity index (reclamation intensity index, RI) on hybrid coastal reclamation, to quantify the impacts of reclamation on coastal ecosystems. We also made use of mean annual absolute changes to a number of biotic variables (biodiversity, species richness, biomass of total macrozoobenthos, and species richness and biomass of Polychaeta, Mollusca, Crustacea, and Echinodermata) to determine Hedges’d index, which is a measure of the potential effects of coastal reclamation. Our results showed that there was significant difference of coastal reclamation intensity between Yellow Sea, East China Sea and South China Sea, the biological changes in effect sizes of the three regions differed greatly over time. Our modelling analyses showed that hybrid coastal reclamation generally had significant negative impacts on species diversity and biomass of macrozoobenthos. These relationships varied among different taxonomic groups and included both linear and nonlinear relationships. The results indicated that a high-intensity of coastal reclamation contributed to a pronounced decline in species diversity and biomass, while lower-intensity reclamation, or reclamation within certain thresholds, resulted in a small increase in species diversity and biomass. These results have important implications for biodiversity conservation and the ecological restoration of coastal wetlands in face of the intensive reclamation activities. (letter)

  7. Photocatalytic post-treatment in waste water reclamation systems

    Science.gov (United States)

    Cooper, Gerald; Ratcliff, Matthew A.; Verostko, Charles E.

    1989-01-01

    A photocatalytic water purification process is described which effectively oxidizes organic impurities common to reclaimed waste waters and humidity condensates to carbon dioxide at ambient temperatures. With this process, total organic carbon concentrations below 500 ppb are readily achieved. The temperature dependence of the process is well described by the Arrhenius equation and an activation energy barrier of 3.5 Kcal/mole. The posttreatment approach for waste water reclamation described here shows potential for integration with closed-loop life support systems.

  8. LANDSLIDE RECLAMATION IN ŠÁRKA VALLEY

    Directory of Open Access Journals (Sweden)

    Martin Vaníček

    2017-10-01

    Full Text Available Housing development in Šárka’s valley is situated in former brickworks – borrow pit for brick-clay. On its north side the borrow pit cutting is up to 8m high with main road on top. This slope was suffering from progressive landslide mainly due to weathering and surface erosion. The reclamation works proposed and afterwards executed consisted of stabilizing the slope by combination of soil nailing and connecting reinforced slope with surcharge bench at its toe. The final reinforced soil structure nicely merged into the surrounding environment.

  9. Reclamation of waste rock material at the Summitville Mine Superfund site using organic matter and topsoil treatments

    Energy Technology Data Exchange (ETDEWEB)

    Winter, M.E.; Redente, E.F.

    1999-07-01

    The Summitville Mine was a high elevation (3,500 m) open-pit gold mine located in southwestern Colorado. The mine was abandoned in 1992 leaving approximately 200 ha of disturbed area comprised partially of two large waste rock piles. Reclamation of waste rock material is challenging due to extreme climatic conditions in conjunction with a high acid-production potential and low organic matter concentration of the material. In addition, stockpiled topsoil at the site is acidic and may be biologically inactive due to long-term storage, and therefore sufficient plant growth medium may be limited. The purpose of this study was to determine the effect of organic amendments (mushroom compost vs. biosolids) and topsoil (stockpiled vs. nonstockpiled) on aboveground biomass, herbaceous cover, and trace element uptake. An on-site field study was established in 1995 to identify the most effective combination of treatments for successful reclamation of waste rock material. Incorporation of organic matter increased total aboveground production and cover, with mushroom compost being more effective than biosolids, but did not show significant trends relative to trace element uptake. The use of topsoil did not show a significant response relative to aboveground production, cover, and trace element uptake. This study shows that waste rock materials can be directly revegetated if properly neutralized, fertilized, and amended with organic matter. Additionally, stockpiled topsoil was equivalent in plant growth to non-stockpiled topsoil when neutralized with lime.

  10. Evaluation of the seasonal performance of a water reclamation pond-constructed wetland system for removing emerging contaminants.

    Science.gov (United States)

    Matamoros, Víctor; Salvadó, Victòria

    2012-01-01

    The capacity of a full-scale reclamation pond-constructed wetland (CW) system to eliminate 27 emerging contaminants (i.e. pharmaceuticals, sunscreen compounds, fragrances, antiseptics, fire retardants, pesticides, and plasticizers) and the seasonal occurrence of these contaminants is studied. The compounds with the highest concentrations in the secondary effluent are diclofenac, caffeine, ketoprofen, and carbamazepine. The results show that the constructed wetland (61%) removes emerging contaminants significantly more efficiently than the pond (51%), presumably due to the presence of plants (Phragmites and Thypa) as well as the higher hydraulic residence time (HRT) in the CW. A greater seasonal trend to the efficient removal of these compounds is observed in the pond than in the CW. The overall mass removal efficiency of each individual compound ranged from 27% to 93% (71% on average), which is comparable to reported data in advanced treatments (photo-fenton and membrane filtration). The seasonal average content of emerging contaminants in the river water (2488 ng L(-1)) next to the water reclamation plant is found to be higher than the content in the final reclaimed water (1490 ng L(-1)), suggesting that the chemical quality of the reclaimed water is better than available surface waters. Copyright © 2011 Elsevier Ltd. All rights reserved.

  11. Reclamation research for the future at Syncrude Canada Ltd. : soil simulation-revegetation studies on tailings sand

    Energy Technology Data Exchange (ETDEWEB)

    Fedkenheuer, A W; Browne, J

    1979-12-01

    In response to the rising demand for energy in today's world, oil extracted from oil sands has become a viable energy source. Syncrude Canada Ltd. is a 2.2 billion dollar oil sands surface mining and processing venture situated in the Athabasca oil sands of northeastern Alberta. It is located near the town of Fort McMurray approximately 420 km north of Edmonton. During its planned 25 years of mine life, Syncrude expects to produce more than 1 billion barrels of oil from a 2800 ha mine area. Syncrude is committed to reclaiming this immense mine area. The reclamation objective is to return the disturbed site to a vegetative cover having a productivity which is equal to or greater than that which existed prior to disturbance. The reclaimed area must also be compatible with the neighboring natural areas. To accomplish this the vast quantities of tailings sand (that is, the leftover sand from which the oil has been extracted) must be reformed into a soil which is capable of supporting native plant communities. Researchers at Syncrude are looking for ways to use indigenous materials with the tailings sand to simulate a naturally-formed soil. Native plant species are being tested to see how well they will grow in such simulated soils and to evaluate their potential for use in large scale reclamation projects. This brochure describes the soil simulation-revegetation experiments going on at Syncrude.

  12. 77 FR 55430 - Arkansas Regulatory Program and Abandoned Mine Land Reclamation Plan

    Science.gov (United States)

    2012-09-10

    ... of its regulatory program and abandoned mine land reclamation plan, make grammatical changes, correct... portions of its regulatory program and abandoned mine land reclamation plan, make grammatical changes... Streams. PART 785--REQUIREMENTS FOR PERMITS FOR SPECIAL CATEGORIES OF MINING 785.13, 785.14, 785.15...

  13. 30 CFR 902.20 - Approval of Alaska abandoned mine land reclamation plan.

    Science.gov (United States)

    2010-07-01

    ... available at: (a) Department of Natural Resources, Division of Mining and Water Management, 3601 C Street... reclamation plan. 902.20 Section 902.20 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE ALASKA...

  14. Science and technology of rubber reclamation with special attention to NR based waste latex products

    NARCIS (Netherlands)

    Rajan, V.V.; Dierkes, Wilma K.; Joseph, R.; Noordermeer, Jacobus W.M.

    2006-01-01

    A comprehensive overview of reclamation of cured rubber with special emphasis on latex reclamation is depicted in this paper. The latex industry has expanded over the years to meet the world demands for gloves, condoms, latex thread, etc. Due to the strict specifications for the products and the

  15. Renewable Energy Assessment of Bureau of Reclamation Land and Facilities Using Geographic Information Systems

    Energy Technology Data Exchange (ETDEWEB)

    Heimiller, D.; Haase, S.; Melius, J.

    2013-05-01

    This report summarizes results of geographic information system screening for solar and wind potential at select Bureau of Reclamation lands in the western United States. The study included both utility-scale and facility-scale potential. This study supplements information in the report titled Renewable Energy Assessment for the Bureau of Reclamation: Final Report.

  16. 43 CFR 420.25 - Reclamation lands administered by other agencies.

    Science.gov (United States)

    2010-10-01

    ... for management of Reclamation lands for recreation purposes. Specifically: (1) Reclamation lands managed by the National Park Service, the Bureau of Sport Fisheries and Wildlife, the Bureau of Land Management, the Forest Service, and other Federal agencies will be administered in accordance with...

  17. 30 CFR 942.800 - Bond and insurance requirements for surface coal mining and reclamation operations.

    Science.gov (United States)

    2010-07-01

    ... required for postmining water treatment must remain bonded. However, the trust fund or annuity may serve as... coal mining and reclamation operations. 942.800 Section 942.800 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING...

  18. 30 CFR 906.20 - Approval of Colorado abandoned mine land reclamation plan.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Approval of Colorado abandoned mine land reclamation plan. 906.20 Section 906.20 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE COLORADO...

  19. Green technologies in natural and synthetic surfaces use for dumps reclamation

    Science.gov (United States)

    Klimkina, Iryna; Fedotov, Viacheslav; Heilmeier, Hermann

    2016-04-01

    Last 50 years coal dumps reclamation in Ukraine was based on two- or three-layer models. These models use a fertile substratum underneath a black soil (chernozem) layer 0.5 m thick (Model 1) or 0.70-1 m thick (Model 2). Model 3 has 3 layers. The deepest layer is a substrate which is phytotoxic or unfavourable for crop growth (coal-bearing substrates with a high content of pyrite, saline substrates). The second layers acts as a protective shield and consist of loess (0.5 m). The third is the layer of fertile chernozem (0.3-0.8 m). However, due to the situation of a shortage of fertile soils, a lack of nutrient elements in the waste rock, and a moisture deficit with strong rock acidification, it is considered important to develop new non-traditional reclamation methods based on the geo-synthetic materials used in conjunction with sowing lawn grasses or grass seeds inside. The geogrids and biogeotextiles made from natural materials such as hemp, flax, jute, coconut and other plant biopolymer fibers are recommended for bioremediation. The biodegradable carcass of reclamation covering materials stabilises the slopes, effectively restraints the soil particles from leaching and blowing, and prevents wash-out of the plant seeds, as well as protecting them from being eaten by animals. The research object of the presented work was the coal dumps of sulfide rocks in Western Donbass (Ukraine). These rocks are characterized by low level of the maximum hygroscopic moisture (4.3%) and moisture content not available for plant growth (5-6%). Also the rock has an average level of salinity, mainly of the sulphate type. The main goal of the study was to justify the use of some non-traditional materials such as burlap (jute cloth), agricultural fibers (light non-woven material from polypropylene fiber of spun-bond type) and a padding of polyester in the capacity of a geosynthetic substrate as a basis for the mixed grass crop that enable a reduction in the bioremediation costs (in

  20. 30 CFR 827.12 - Coal preparation plants: Performance standards.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Coal preparation plants: Performance standards...-COAL PREPARATION PLANTS NOT LOCATED WITHIN THE PERMIT AREA OF A MINE § 827.12 Coal preparation plants..., modification, reclamation, and removal activities at coal preparation plants shall comply with the following...

  1. 43 CFR 404.12 - Can Reclamation provide assistance with the construction of a rural water supply project under...

    Science.gov (United States)

    2010-10-01

    ... the construction of a rural water supply project under this program? 404.12 Section 404.12 Public... RECLAMATION RURAL WATER SUPPLY PROGRAM Overview § 404.12 Can Reclamation provide assistance with the construction of a rural water supply project under this program? Reclamation may provide assistance with the...

  2. 43 CFR 404.36 - Will Reclamation reimburse me for the cost of an appraisal investigation or a feasibility study...

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Will Reclamation reimburse me for the cost... Reclamation reimburse me for the cost of an appraisal investigation or a feasibility study that was not...) or (b). Reclamation will not reimburse you or provide program funding for any expenses related to an...

  3. 30 CFR 937.784 - Underground mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 937.784 Section 937.784 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...

  4. 30 CFR 903.784 - Underground mining permit applications-Minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 903.784 Section 903.784 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, applies to any person who submits an application...

  5. 30 CFR 910.784 - Underground mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 910.784 Section 910.784 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. (a) Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...

  6. 30 CFR 942.780 - Surface mining permit applications-Minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 942.780 Section 942.780 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...

  7. 30 CFR 947.784 - Underground mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 947.784 Section 947.784 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. (a) Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...

  8. 30 CFR 942.784 - Underground mining permit applications-Minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 942.784 Section 942.784 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application...

  9. 30 CFR 939.784 - Underground mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 939.784 Section 939.784 Mineral Resources OFFICE OF SURFACE... requirements for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...

  10. 30 CFR 912.780 - Surface mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 912.780 Section 912.780 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...

  11. 30 CFR 921.780 - Surface mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 921.780 Section 921.780 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application...

  12. 30 CFR 941.784 - Underground mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 941.784 Section 941.784 Mineral Resources OFFICE OF SURFACE... requirements for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...

  13. 30 CFR 939.780 - Surface mining permit applications-minimum requirements for reclamation and operations plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operations plan. 939.780 Section 939.780 Mineral Resources OFFICE OF SURFACE... for reclamation and operations plan. (a) Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application...

  14. 30 CFR 905.780 - Surface mining permit applications-Minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 905.780 Section 905.780 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...

  15. 30 CFR 922.784 - Underground mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 922.784 Section 922.784 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application...

  16. 30 CFR 947.780 - Surface mining permit application-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 947.780 Section 947.780 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. (a) Part 780 of this chapter, Surface Mining Permit Application—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...

  17. 30 CFR 933.780 - Surface mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 933.780 Section 933.780 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application...

  18. 30 CFR 910.780 - Surface mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 910.780 Section 910.780 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. (a) Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirement for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...

  19. 30 CFR 922.780 - Surface mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 922.780 Section 922.780 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...

  20. 30 CFR 905.784 - Underground mining permit applications-Minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 905.784 Section 905.784 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application...

  1. 30 CFR 933.784 - Underground mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 933.784 Section 933.784 Mineral Resources OFFICE OF SURFACE... requirements for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...

  2. 30 CFR 903.780 - Surface mining permit applications-Minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 903.780 Section 903.780 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, applies to any person who submits an application to conduct...

  3. 30 CFR 912.784 - Underground mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 912.784 Section 912.784 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...

  4. 30 CFR 937.780 - Surface mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 937.780 Section 937.780 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. (a) Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirement for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...

  5. 30 CFR 921.784 - Underground mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 921.784 Section 921.784 Mineral Resources OFFICE OF SURFACE... requirements for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...

  6. 30 CFR 941.780 - Surface mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... requirements for reclamation and operation plan. 941.780 Section 941.780 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. (a) Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application...

  7. On the validity of travel-time based nonlinear bioreactive transport models in steady-state flow.

    Science.gov (United States)

    Sanz-Prat, Alicia; Lu, Chuanhe; Finkel, Michael; Cirpka, Olaf A

    2015-01-01

    Travel-time based models simplify the description of reactive transport by replacing the spatial coordinates with the groundwater travel time, posing a quasi one-dimensional (1-D) problem and potentially rendering the determination of multidimensional parameter fields unnecessary. While the approach is exact for strictly advective transport in steady-state flow if the reactive properties of the porous medium are uniform, its validity is unclear when local-scale mixing affects the reactive behavior. We compare a two-dimensional (2-D), spatially explicit, bioreactive, advective-dispersive transport model, considered as "virtual truth", with three 1-D travel-time based models which differ in the conceptualization of longitudinal dispersion: (i) neglecting dispersive mixing altogether, (ii) introducing a local-scale longitudinal dispersivity constant in time and space, and (iii) using an effective longitudinal dispersivity that increases linearly with distance. The reactive system considers biodegradation of dissolved organic carbon, which is introduced into a hydraulically heterogeneous domain together with oxygen and nitrate. Aerobic and denitrifying bacteria use the energy of the microbial transformations for growth. We analyze six scenarios differing in the variance of log-hydraulic conductivity and in the inflow boundary conditions (constant versus time-varying concentration). The concentrations of the 1-D models are mapped to the 2-D domain by means of the kinematic (for case i), and mean groundwater age (for cases ii & iii), respectively. The comparison between concentrations of the "virtual truth" and the 1-D approaches indicates extremely good agreement when using an effective, linearly increasing longitudinal dispersivity in the majority of the scenarios, while the other two 1-D approaches reproduce at least the concentration tendencies well. At late times, all 1-D models give valid approximations of two-dimensional transport. We conclude that the

  8. Fractionation, transfer, and ecological risks of heavy metals in riparian and ditch wetlands across a 100-year chronosequence of reclamation in an estuary of China

    Energy Technology Data Exchange (ETDEWEB)

    Xiao, Rong [State Key Laboratory of Water Environment Stimulation, School of Environment, Beijing Normal University, Beijing 100875 (China); School of Nature Conservation, Beijing Forestry University, Beijing 100083 (China); Bai, Junhong, E-mail: junhongbai@163.com [State Key Laboratory of Water Environment Stimulation, School of Environment, Beijing Normal University, Beijing 100875 (China); Lu, Qiongqiong; Zhao, Qingqing; Gao, Zhaoqin; Wen, Xiaojun; Liu, Xinhui [State Key Laboratory of Water Environment Stimulation, School of Environment, Beijing Normal University, Beijing 100875 (China)

    2015-06-01

    The effect of reclamation on heavy metal concentrations and the ecological risks in ditch wetlands (DWs) and riparian wetlands (RWs) across a 100-year chronosequence in the Pearl River Estuary of China was investigated. Concentrations of 4 heavy metals (Cd, Cu, Pb, and Zn) in soil and plant samples, and sequential extracts of soil samples were determined, using inductively coupled plasma atomic absorption spectrometry. Results showed that heavy metal concentrations were higher in older DW soils than in the younger ones, and that the younger RW soils contained higher heavy metal concentrations compared to the older ones. Although the increasing tendency of heavy metal concentrations in soil was obvious after wetland reclamation, the metals Cu, Pb, and Zn exhibited low or no risks to the environment based on the risk assessment code (RAC). Cd, on the other hand, posed a medium or high risk. Cd, Pb, and Zn were mainly bound to Fe–Mn oxide, whereas most of Cu remained in the residual phase in both ditch and riparian wetland soils, and the residual proportions generally increased with depth. Bioconcentration and translocation factors for most of these four heavy metals significantly decreased in the DWs with older age (p < 0.05), whereas they increased in the RWs with younger age (p < 0.05). The DW soils contained higher concentrations of heavy metals in the organic fractions, whereas there were more carbonate and residual fractions in the RW soils. The non-bioavailable fractions of Cu and Zn, and the organic-bound Cd and Pb significantly inhibited plant growth. - Highlights: • Heavy metals in ditch wetland accumulated with increasing reclamation history. • Heavy metals exist in the Fe–Mn oxides and residual fractions in both wetlands. • Cd posed a medium to high environmental risk while low risk for other metals. • Long reclamation history caused lower BCFs and TFs in DWs and higher levels in RWs. • RW soils contained more heavy metals in the carbonate

  9. Fractionation, transfer, and ecological risks of heavy metals in riparian and ditch wetlands across a 100-year chronosequence of reclamation in an estuary of China

    International Nuclear Information System (INIS)

    Xiao, Rong; Bai, Junhong; Lu, Qiongqiong; Zhao, Qingqing; Gao, Zhaoqin; Wen, Xiaojun; Liu, Xinhui

    2015-01-01

    The effect of reclamation on heavy metal concentrations and the ecological risks in ditch wetlands (DWs) and riparian wetlands (RWs) across a 100-year chronosequence in the Pearl River Estuary of China was investigated. Concentrations of 4 heavy metals (Cd, Cu, Pb, and Zn) in soil and plant samples, and sequential extracts of soil samples were determined, using inductively coupled plasma atomic absorption spectrometry. Results showed that heavy metal concentrations were higher in older DW soils than in the younger ones, and that the younger RW soils contained higher heavy metal concentrations compared to the older ones. Although the increasing tendency of heavy metal concentrations in soil was obvious after wetland reclamation, the metals Cu, Pb, and Zn exhibited low or no risks to the environment based on the risk assessment code (RAC). Cd, on the other hand, posed a medium or high risk. Cd, Pb, and Zn were mainly bound to Fe–Mn oxide, whereas most of Cu remained in the residual phase in both ditch and riparian wetland soils, and the residual proportions generally increased with depth. Bioconcentration and translocation factors for most of these four heavy metals significantly decreased in the DWs with older age (p < 0.05), whereas they increased in the RWs with younger age (p < 0.05). The DW soils contained higher concentrations of heavy metals in the organic fractions, whereas there were more carbonate and residual fractions in the RW soils. The non-bioavailable fractions of Cu and Zn, and the organic-bound Cd and Pb significantly inhibited plant growth. - Highlights: • Heavy metals in ditch wetland accumulated with increasing reclamation history. • Heavy metals exist in the Fe–Mn oxides and residual fractions in both wetlands. • Cd posed a medium to high environmental risk while low risk for other metals. • Long reclamation history caused lower BCFs and TFs in DWs and higher levels in RWs. • RW soils contained more heavy metals in the carbonate

  10. Evaluation of Promising Mutant Lines of Canola Grown under New Reclamation Lands (Harsh Lands)

    International Nuclear Information System (INIS)

    Amer, I.M.; Farrag, M.E.; Soliman, S.S.; Hassan, A.A.

    2017-01-01

    Canola seed lots of four varieties (Serow4, Serow6, Pactol as local cultivars and Evita as exotic variety) were treated with gamma rays at four doses (0, 100, 400 and 600 Gy). The present study aims to evaluate useful mutations in canola which possess high seed yield and oil content under new reclamation desert land at Ras-Suder-Sinai (saline) and Inshas (harsh and poor fertility) in M 4 and M 5 generations. The results at M 4 and M 5 generations showed that the 13-selected mutant lines on the bases of number of pods and seed yield/plant differed in their yield response according to environmental conditions. Over the two locations, the highest number of pods plant and seed yield was found at line 75 (M4) and line 11 for seed yield and line 78 for number of pods in M5 compared to other genotypes. More over, all the mutant lines compared to their parents showed significant or insignificant increases for all studies traits during the two successive generations. Over the two generations, the highest mean value compared to all genotypes was found in line 22 for plant height at Sudr and line 11 at Inshas, for fruiting zone length, the highest value was noticed in line 18 at Sudr and line 75 at Inshas, for the highest number of pods, (125/plant) it was found in line 63 at Sudr and (193/plant) in line 75 at Inshas which reflected the highest seed yield ( 8 g/plant).The highest mean value compared to all genotypes was found for 100 seed-weight in line 8 at Sudr and line 11 at Inshas which appeared the highest seed yield at Suder. Over all studied conditions, the mutant line 75 derived from Evita variety was characterized by the highest mean values for fruiting zone length of plant and number of pods/plant, reflecting a high seed yield (6.47 g/plant ) or about 83.87% over its parent. The increase of seed yield/plant for mutant line 11 over its parent was about 68.8% followed by line 8 surpassed its parent for seed yield by about 60.2 %. The oil content of canola seeds in

  11. Cost-Benefit Analysis of the Electric Lines Reclamation in Italy

    International Nuclear Information System (INIS)

    Curcuruto, S.; Elia, L.; Franchi, A.; Andreuccetti, D.; D'Amore, M.; Martuzzi, M.; Vecchia, P.

    2001-01-01

    Full text: In Italy is now in preparation a specific decree with the aim to regulate the electromagnetic pollution produced by sources operating at frequency until to 100 kHz; in the application field of the rule, the most important sources are the electric lines and relative plants which operate at 50 Hz frequency. In the respect of the precautionary principle, the Italian approach is to define different reference values to protect the population also by long term effects in addition to acute effects: exposition limits, attention values, quality objectives; respectively, 100 μT, 0.5 μT and 0.2 μT. To support this choice, the Ministry of the Environment asked ANPA, in co-operation with other bodies at national level, to produce a study about the costs of the necessary reclamation measures on the electric lines to respect the new limits and their comparison with the expected sanitary benefits. Only the leukaemia cases are considered to estimate the sanitary benefits; for the costs, the technical solutions more frequently adopted by the managers of the lines and the plants have been evaluated. This report shows the results of the study, which presents as element of weakness a knowledge of the exposed Italian population at different levels of magnetic field that cannot be truly representative. (author)

  12. Natural self-reclamation of soils and landscapes affected by agriculture and mining

    Science.gov (United States)

    Alekseenko, Vladimir; Bech, Jaume; Alekseenko, Alexey; Shvydkaya, Natalya; Puzanov, Alexander; Roca, Núria

    2017-04-01

    Processes of possible self-restoration of technogenically disturbed soils are studied in Central and Southern European Russia. Reclamation procedures are mainly not implemented in this vast region, and the natural soil restoration is supposed. Heaps overlaying the former steppe and cropland landscapes are created in the course of rock waste stacking after preparative and cleaning mining works during the underground coal extraction. Approximately 1 500 heaps occupying over 8 000 ha were formed in the area of the Donets Coal Basin. Soils are destroyed under heaps, land subsidence occurs in coal mining areas and acid lakes are usually formed in these ground depressions. Spontaneous combustions happen often and can continue for decades. In order to prevent them, heap surfaces are in some cases levelled and filled with water, forming peculiar ponds. After 70 years of heaps existence and ca. 50 years after their ignition, soil formation is just in the early stages. Heap surface differs a lot in geochemical and mineralogical characteristics from those of surrounding steppe soils that suffered substantial changes at distances up to 1 km. Development of plant communities in areas near coal dumps and heaps is one of the indicators of landscape-geochemical changes. Formation of ruderal phytocenoses with 10-15 % of local flora, as well as invasive and introduced plants occurred under the complex impact of ecological conditions. Communities formed by them are distinguished by the structure simplicity, low species diversity, and plant growth anomalies. Quarries and dumps are formed during underground and open-cast mining of ore deposits. During the last 50 years after abandoning mines in forest areas, the 30 m deep quarries have filled with the creep material less for 0.5 m, and sediments from water streams have added 1-3 cm. Thickness of argillaceous layers does not exceed 1-2 cm at small rock chips of the dumps that measures up to 70 km in length. The dumps are partially

  13. Threshold Considerations and Wetland Reclamation in Alberta's Mineable Oil Sands

    Directory of Open Access Journals (Sweden)

    Lee Foote

    2012-03-01

    Full Text Available Oil sand extraction in Alberta, Canada is a multibillion dollar industry operating over 143 km² of open pit mining and 4600 km² of other bitumen strata in northern boreal forests. Oil production contributes to Canada-wide GDP, creates socio-cultural problems, provides energy exports and employment, and carries environmental risks regarding long-term reclamation uncertainties. Of particular concern are the implications for wetlands and water supply management. Mining of oil sands is very attractive because proven reserves of known quality occur in an accessible, politically stable environment with existing infrastructure and an estimated 5.5 billion extractable barrels to be mined over the next five decades. Extraction occurs under a set of limiting factors or thresholds including: limited social tolerance at local to international levels for externalities of oil sand production; water demands > availability; limited natural gas supplies for oil processing leading to proposals for hydroelectric dams and nuclear reactors to be constructed; difficulties in reclaiming sufficient habitat area to replace those lost. Replacement of the 85 km² of peat-forming wetlands forecast to be destroyed appears unlikely. Over 840 billion liters of toxic fluid byproducts are currently held in 170 km² of open reservoirs without any known process to purify this water in meaningful time frames even as some of it leaches into adjacent lands and rivers. Costs for wetland reclamation are high with estimates of $4 to $13 billion, or about 6% of the net profits generated from mining those sites. This raises a social equity question of how much reclamation is appropriate. Time frames for economic, political, and ecological actions are not well aligned. Local people on or near mine sites have had to change their area use for decades and have been affected by industrial development. Examining mining effects to estimate thresholds of biophysical realities, time scales

  14. The Reclamation of Tailing Area Reclamation in The Mining Area with Forages, is it Possible?

    Directory of Open Access Journals (Sweden)

    N D Purwantari

    2007-09-01

    Full Text Available Tailings are what’s left over from mining. The rock where copper, gold, silver and other minerals found is ground up into fine particles so that the valuable material can be taken out and refined. The solid waste would affect the environment physically and biologically. Characteristics of tailing are high porosity with low water holding capacity, poor organic matter, poor macro and micro nutrients and no microorganism activity. Therefore, it takes time and requires strategy to manage and change them to a more productive area. Many technologies have been applied to rehabilitate tailing for agriculture. The technologies including the use of manure, compost, mulch, biosolid, chemical fertilizer, microorganism (bacteria, mycorhiza and phytoremediation. Phytoremediation is the use of plants to remediate selected contaminants in the contaminated soil, sludge, sediment, water (ground, surface, waste water. Phytoremediation encompasses a number of different methods that can lead to contaminant degradation, removal or immobilization. Those methods including phytodegradation/rhizodegradation, phytoextraction, phytovolatilization and phytostabilization. The phytoextraction is inexpensive compared with the conventional technology. Some forages have been used for phytoremediation such as Paspalum notatum (Bahia grass, Vetiveria zizonoides (Vetiver grass, Cynodon dactylon (Bermuda grass, since they have been known as heavy metal hyperaccumulator plant.

  15. Use of acoustic wave travel-time measurements to probe the near-surface layers of the Sun

    Science.gov (United States)

    Jefferies, S. M.; Osaki, Y.; Shibahashi, H.; Duvall, T. L., Jr.; Harvey, J. W.; Pomerantz, M. A.

    1994-01-01

    The variation of solar p-mode travel times with cyclic frequency nu is shown to provide information on both the radial variation of the acoustic potential and the depth of the effective source of the oscillations. Observed travel-time data for waves with frequency lower than the acoustic cutoff frequency for the solar atmosphere (approximately equals 5.5 mHz) are inverted to yield the local acoustic cutoff frequency nu(sub c) as a function of depth in the outer convection zone and lower atmosphere of the Sun. The data for waves with nu greater than 5.5 mHz are used to show that the source of the p-mode oscillations lies approximately 100 km beneath the base of the photosphere. This depth is deeper than that determined using a standard mixing-length calculation.

  16. Seismic Velocity Structure of the Pacific Upper Mantle in the NoMelt Region from Finite-Frequency Traveltime Tomography

    Science.gov (United States)

    Hung, S. H.; Lin, P. Y.; Gaherty, J. B.; Russell, J. B.; Jin, G.; Collins, J. A.; Lizarralde, D.; Evans, R. L.; Hirth, G.

    2017-12-01

    Surface wave dispersion and magnetotelluric survey from the NoMelt Experiment conducted on 70 Ma central Pacific seafloor revealed an electrically resistive, high shear wave velocity lid of 80 km thick underlain by a non-highly conductive, low-velocity layer [Sarafian et al., 2015; Lin et al., 2016]. The vertical structure of the upper mantle consistent with these observational constraints suggests a plausible convection scenario, where the seismically fast, dehydrated lithosphere preserving very strong fossil spreading fabric moves at a constant plate speed over the hydrated, melt-free athenospheric mantle with the presence of either pressure-driven return flow or thermally-driven small scale circulation. To explore 3-D variations in compressional shear wave velocities related to the lithospheric and asthenospheric mantle dynamics, we employ a multichannel cross correlation method to measure relative traveltime residuals based on the vertical P and traverse S waveforms filtered at 10-33 s from telseismic earthquakes at epicentral distance between 30 and 98 degrees. The obtained P and S residuals show on average peak-to-peak variations of ±0.5 s and ±1 s, respectively, across the NoMelt OBS array. Particularly, the P residuals for most of the events display an asymmetrical pattern with respect to an axis oriented nearly N-S to NE-SW through the array. Preliminary ray-based P tomography results reveal similar asymmetric variations in the uppermost 100 km mantle. To verify the resulting structural features, we will further perform both the P and S traveltime tomography and resolution tests based on a multiscale finite-frequency approach which properly takes into account both the 3D off-path sensitivities of the measured residuals and data-adaptive resolution of the model.

  17. Temporal-spatial variations and driving factors analysis of coastal reclamation in China

    Science.gov (United States)

    Meng, Weiqing; Hu, Beibei; He, Mengxuan; Liu, Baiqiao; Mo, Xunqiang; Li, Hongyuan; Wang, Zhongliang; Zhang, Yu

    2017-05-01

    Coastal reclamation is the gain of land from the sea or coastal wetlands for agricultural purposes, industrial use or port expansions. Large-scale coastal land reclamation can have adverse effects on the coastal environment, including loss of marine habitats and deterioration of coastal water quality. In recent decades, coastal land reclamation has occurred extensively to meet the increasing needs of rapid economic development and urbanization in China. The overall objective of this study is to understand the coastal reclamation status of China from 1979 to 2014 and analyzed its driving factors for mitigating negative ecological effects. The data of coastal reclamation were done with the ERDAS Imagine V9.2 platform and ArcGIS software based on remote images including Landsat, SPOT, ZY-2 and ZY-3. Potential driving factors for sea reclamation were selected based on statistics bulletins and the knowledge of experts in coastal management. In order to understand the relationships among possible impact factors and coastal reclamation, the Partial Least-Squares Regression models was constructed. The analysis results indicated that the total area of reclamation was 11162.89 km2 based on remote sensing images between 1979 and 2014. Shandong Province is the largest reclamation area, reaching 2736.54 km2, and the reclamation is mainly concentrated in Zhejiang, Jiangsu and Liaoning, where the reclamation areas were all more than 1000 km2. According to the remote sensing images, there are three coastal reclamation hotspot regions including Bohai bay (in which is located Liaoning, Tianjin and Hebei), Jiangsu province coastal area and Hangzhou bay (in Zhejiang province). A large scale land reclamation plan of more than 5880 km2 has been made by local government and 2469 km2 has approved by the State Council. From the analyzed results, there is a significant collinearity between these indicators, and no significant correlation between the area of reclamation and selected

  18. Plutonium Reclamation Facility incident response project progress report

    International Nuclear Information System (INIS)

    Austin, B.A.

    1997-01-01

    This report provides status of Hanford activities in response to process deficiencies highlighted during and in response to the May 14, 1997, explosion at the Plutonium Reclamation Facility. This report provides specific response to the August 4, 1997, memorandum from the Secretary which requested a progress report, in 120 days, on activities associated with reassessing the known and evaluating new vulnerabilities (chemical and radiological) at facilities that have been shut down, are in standby, are being deactivated or have otherwise changed their conventional mode of operation in the last several years. In addition, this report is intended to provide status on emergency response corrective activities as requested in the memorandum from the Secretary on August 28, 1997. Status is also included for actions requested in the second August 28, 1997, memorandum from the Secretary, regarding timely notification of emergencies

  19. Plutonium Reclamation Facility incident response project progress report

    Energy Technology Data Exchange (ETDEWEB)

    Austin, B.A.

    1997-11-25

    This report provides status of Hanford activities in response to process deficiencies highlighted during and in response to the May 14, 1997, explosion at the Plutonium Reclamation Facility. This report provides specific response to the August 4, 1997, memorandum from the Secretary which requested a progress report, in 120 days, on activities associated with reassessing the known and evaluating new vulnerabilities (chemical and radiological) at facilities that have been shut down, are in standby, are being deactivated or have otherwise changed their conventional mode of operation in the last several years. In addition, this report is intended to provide status on emergency response corrective activities as requested in the memorandum from the Secretary on August 28, 1997. Status is also included for actions requested in the second August 28, 1997, memorandum from the Secretary, regarding timely notification of emergencies.

  20. Reclamation of abandoned underground mines in the United Kingdom

    International Nuclear Information System (INIS)

    Brook, D.

    1994-01-01

    Since 1980, the Derelict Land Grant program has supported reclamation of abandoned mines in the United Kingdom. The stabilization of large-scale limestone mines in the West Midlands has stimulated the development of new methods of bulk infilling using waste materials as thick pastes. Colliery spoil rock paste develops strengths of 10 to 20 kPa to support roof falls and prevent crown hole collapse. Pulverized fuel ash rock paste develops strengths over 1 MPa where lateral support to pillars is required. Smaller scale mine workings in the West Midlands and elsewhere have been stabilized using conventional grouting techniques, hydraulic and pneumatic stowing, foamed-concrete infill, bulk excavation with controlled backfill, and structural support using bolts, mesh, and shotcrete

  1. Alberta Surface Reclamation Fund annual report, April 1, 1992 to March 31, 1993

    International Nuclear Information System (INIS)

    1993-01-01

    The Alberta Surface Reclamation Fund holds security deposits as an incentive to assure satisfactory reclamation of coal and oil sands exploration and coal, pipelines, sand and gravel and oil sands development operations. Upon satisfactory compliance, the funds are returned to the depositor. Where there is not satisfactory compliance, the Land Conservation and Reclamation Council is obligated to carry out the subsequent reclamation and the funds are used to complete the reclamation. This document also reports on the disposition of all non-cash security deposits which have been accepted instead of cash. During the year, $382,610 was refunded from coal exploration deposits, $82,226 was refunded from oil sands exploration deposits, $259,427 was refunded from pipeline development and reclamation deposits, and $94,421 was refunded from sand and gravel deposits where satisfactory reclamation had been completed. The fund, which is an integral part of the Consolidated Cash Investment Trust Fund administered by the Provincial Treasurer, earned between 6.15 and 7.85% interest on cash deposits calculated monthly. The interest accrues to the depositor's account on a quarterly basis. The total cash deposits plus interest, bonds and guaratees as of March 31, 1993 held in the fund was $116,199,168. The balance sheet and operating account summary summarize the fund and also provide details of each individual account

  2. Alberta Surface Reclamation Fund annual report, April 1, 1991 to March 31, 1992

    International Nuclear Information System (INIS)

    1992-01-01

    The Alberta Surface Reclamation Fund holds security deposits as an incentive to assure satisfactory reclamation of coal and oil sands exploration and coal, pipelines, sand and gravel and oil sands development operations. Upon satisfactory compliance, the funds are returned to the depositor. Where there is not satisfactory compliance, the Land Conservation and Reclamation Council is obligated to carry out the subsequent reclamation and the funds are used to complete the reclamation. This document also reports on the disposition of all non-cash security deposits which have been accepted instead of cash. During the year, $136,703 was refunded from coal development deposits, $199,788 was refunded from coal exploration deposits, $92,200 was refunded from oil exploration deposits, $145,565 was refunded from pipeline development and reclamation deposits, and $281,209 was refunded from sand and gravel deposits where satisfactory reclamation had been completed. The fund, which is an integral part of the Consolidated Cash Investment Trust Fund administered by the Provincial Treasurer, earned between 7.88 and 10.4% interest on cash deposits calculated monthly. The interest accrues to the depositor's account on a quarterly basis. The total cash deposits plus interest, bonds and guaratees as of March 31, 1992 held in the fund was $110,811,702. The balance sheet and operating account summary summarize the fund and also provide details of each individual account

  3. Effect of reclamation on soil organic carbon pools in coastal areas of eastern China

    Science.gov (United States)

    Li, Jianguo; Yang, Wenhui; Li, Qiang; Pu, Lijie; Xu, Yan; Zhang, Zhongqi; Liu, Lili

    2018-06-01

    The coastal wetlands of eastern China form one of the most important carbon sinks in the world. However, reclamation can significantly alter the soil carbon pool dynamics in these areas. In this study, a chronosequence was constructed for four reclamation zones in Rudong County, Jiangsu Province, eastern China (reclaimed in 1951, 1974, 1982, and 2007) and a reference salt marsh to identify both the process of soil organic carbon (SOC) evolution, as well as the effect of cropping and soil properties on SOC with time after reclamation. The results show that whereas soil nutrient elements and SOC increased after reclamation, the electrical conductivity of the saturated soil extract (ECe), pH, and bulk density decreased within 62 years following reclamation and agricultural amendment. In general, the soil's chemical properties remarkably improved and SOC increased significantly for approximately 30 years after reclamation. Reclamation for agriculture (rice and cotton) significantly increased the soil organic carbon density (SOCD) in the top 60 cm, especially in the top 0-30 cm. However, whereas the highest concentration of SOCD in rice-growing areas was in the top 0-20 cm of the soil profile, it was greater at a 20-60 cm depth in cottongrowing areas. Reclamation also significantly increased heavy fraction organic carbon (HFOC) levels in the 0-30 cm layer, thereby enhancing the stability of the soil carbon pool. SOC can thus increase significantly over a long time period after coastal reclamation, especially in areas of cultivation, where coastal SOC pools in eastern China tend to be more stable.

  4. Effect of reclamation on soil organic carbon pools in coastal areas of eastern China

    Science.gov (United States)

    Li, Jianguo; Yang, Wenhui; Li, Qiang; Pu, Lijie; Xu, Yan; Zhang, Zhongqi; Liu, Lili

    2018-04-01

    The coastal wetlands of eastern China form one of the most important carbon sinks in the world. However, reclamation can significantly alter the soil carbon pool dynamics in these areas. In this study, a chronosequence was constructed for four reclamation zones in Rudong County, Jiangsu Province, eastern China (reclaimed in 1951, 1974, 1982, and 2007) and a reference salt marsh to identify both the process of soil organic carbon (SOC) evolution, as well as the effect of cropping and soil properties on SOC with time after reclamation. The results show that whereas soil nutrient elements and SOC increased after reclamation, the electrical conductivity of the saturated soil extract (ECe), pH, and bulk density decreased within 62 years following reclamation and agricultural amendment. In general, the soil's chemical properties remarkably improved and SOC increased significantly for approximately 30 years after reclamation. Reclamation for agriculture (rice and cotton) significantly increased the soil organic carbon density (SOCD) in the top 60 cm, especially in the top 0-30 cm. However, whereas the highest concentration of SOCD in rice-growing areas was in the top 0-20 cm of the soil profile, it was greater at a 20-60 cm depth in cottongrowing areas. Reclamation also significantly increased heavy fraction organic carbon (HFOC) levels in the 0-30 cm layer, thereby enhancing the stability of the soil carbon pool. SOC can thus increase significantly over a long time period after coastal reclamation, especially in areas of cultivation, where coastal SOC pools in eastern China tend to be more stable.

  5. Reclamation of alkaline spent moulding sands of organic and inorganic type and their mixtures

    Directory of Open Access Journals (Sweden)

    R. Dańko

    2011-10-01

    Full Text Available Introduction of modern moulding sands with organic and inorganic binders requires the reclamation treatments in order to be able to reuse the matrices of spent sands. The spent sands, depending on the applied binding agent, are characterised by various abilities of the matrix reclamation. The results of investigations of the reclamation of spent moulding sands with the Rudal binder and spent sands with the Rezolit binder in the system of uniform sands and of mixed ones, are presented in the paper. Investigations were performed by means of the special experimental stands designed and built in the AGH University of Science and Technology, AGH, in Krakow.

  6. Assessing the Sustainable Development of Coastal Reclamation: A Case of Makassar Using GIS Application

    Science.gov (United States)

    Yurnita, A.; Trisutomo, S.; Ali, M.

    2017-07-01

    Reclamation has been made in many areas in Indonesia including Makassar, as a response to the present needs of land as the impact of human activity in urban area. This research aims to assess the sustainable development of coastal reclamation and focus on environmental dimension of sustainable urban development. Assessment will be done by reclamation sustainability index (RSI) and analysis by GIS as the tools. RSI was built from previous research that has simplified from many researches and analysis by Structure of Analytic Hierarchy Process (AHP) and expert choice. RSI uses 9 indices from three indicators of environment factor which are coastal resources, building and infrastructure.

  7. Sense of ownership and evaluation of safety. Questionnaire survey for reclamation project in the uranium mine

    International Nuclear Information System (INIS)

    Ishizaka, Kaoru; Gofuku, Akio; Tanaka, Masaru; Tokizawa, Takayuki; Sato, Kazuhiko; Koga, Osamu

    2010-01-01

    To obtain public understanding on the uranium mining sites reclamation at Ningyo-toge Environmental Engineering Center, it is necessary to conduct appropriate Risk Communication (RC). In this study, to discuss the appropriate Risk communication method on the uranium mining sites reclamation, we conducted questionnaire survey and SEM analysis. The results of the pass analysis are as follows: (1) in the group which has high-sense of ownership, risk acceptance has a strong impact on sense of security for uranium mining sites reclamation, (2) in the group which shows low-sense of ownership, hatred for radioactive ray has a strong impact relatively. (author)

  8. Regional travel-time residual studies and station correction from 1-D velocity models for some stations around Peninsular Malaysia and Singapore

    Science.gov (United States)

    Osagie, Abel U.; Nawawi, Mohd.; Khalil, Amin Esmail; Abdullah, Khiruddin

    2017-06-01

    We have investigated the average P-wave travel-time residuals for some stations around Southern Thailand, Peninsular Malaysia and Singapore at regional distances. Six years (January, 2010-December, 2015) record of events from central and northern Sumatra was obtained from the digital seismic archives of Integrated Research Institute for Seismology (IRIS). The criteria used for the data selection are designed to be above the magnitude of mb 4.5, depth less than 200 km and an epicentral distance shorter than 1000 km. Within this window a total number of 152 earthquakes were obtained. Furthermore, data were filtered based on the clarity of the seismic phases that are manually picked. A total of 1088 P-wave arrivals and 962 S-wave arrivals were hand-picked from 10 seismic stations around the Peninsula. Three stations IPM, KUM, and KOM from Peninsular Malaysia, four stations BTDF, NTU, BESC and KAPK from Singapore and three stations SURA, SRIT and SKLT located in the southern part of Thailand are used. Station NTU was chosen as the Ref. station because it recorded the large number of events. Travel-times were calculated using three 1-D models (Preliminary Ref. Earth Model PREM (Dziewonski and Anderson, 1981, IASP91, and Lienert et al., 1986) and an adopted two-point ray tracing algorithm. For the three models, we corroborate our calculated travel-times with the results from the use of TAUP travel-time calculation software. Relative to station NTU, our results show that the average P wave travel-time residual for PREM model ranges from -0.16 to 0.45 s for BESC and IPM respectively. For IASP91 model, the average residual ranges from -0.25 to 0.24 s for SRIT and SKLT respectively, and ranges from -0.22 to 0.30 s for KAPK and IPM respectively for Lienert et al. (1986) model. Generally, most stations have slightly positive residuals relative to station NTU. These corrections reflect the difference between actual and estimated model velocities along ray paths to stations and

  9. Surface coal mine land reclamation using a dry flue gas desulfurization product: Short-term and long-term water responses.

    Science.gov (United States)

    Chen, Liming; Stehouwer, Richard; Tong, Xiaogang; Kost, Dave; Bigham, Jerry M; Dick, Warren A

    2015-09-01

    Abandoned coal-mined lands are a worldwide concern due to their potential negative environmental impacts, including erosion and development of acid mine drainage. A field study investigated the use of a dry flue gas desulfurization product for reclamation of abandoned coal mined land in USA. Treatments included flue gas desulfurization product at a rate of 280 Mg ha(-1) (FGD), FGD at the same rate plus 112 Mg ha(-1) yard waste compost (FGD/C), and conventional reclamation that included 20 cm of re-soil material plus 157 Mg ha(-1) of agricultural limestone (SOIL). A grass-legume sward was planted after treatment applications. Chemical properties of surface runoff and tile water (collected from a depth of 1.2m below the ground surface) were measured over both short-term (1-4 yr) and long-term (14-20 yr) periods following reclamation. The pH of surface runoff water was increased from approximately 3, and then sustained at 7 or higher by all treatments for up to 20 yr, and the pH of tile flow water was also increased and sustained above 5 for 20 yr. Compared with SOIL, concentrations of Ca, S and B in surface runoff and tile flow water were generally increased by the treatments with FGD product in both short- and long-term measurements and concentrations of the trace elements were generally not statistically increased in surface runoff and tile flow water over the 20-yr period. However, concentrations of As, Ba, Cr and Hg were occasionally elevated. These results suggest the use of FGD product for remediating acidic surface coal mined sites can provide effective, long-term reclamation. Copyright © 2015. Published by Elsevier Ltd.

  10. Suitability of dredged material for reclamation of surface-mined land. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, W.; Van Luik, A.

    1979-12-01

    Eroding ridges of acidic coal-mine spoil in La Salle County, Illinois, were leveled to form a gently-sloped raised plateau. Four test plots were constructed: a control plot and three treatment plots that received a 0.9-m-thick cover of dredged material obtained from the Metropolitan Sanitary District of Greater Chicago. Two treatment plots received lime applications and all plots were seeded with a mixture of grasses. Pressure-vacuum soil water samplers were installed, in duplicate, at two levels in the control plot and at three levels in each treatment plot. The three levels in the treatment plots coincided with dredged material, the dredged-material mine-spoil interface, and the underlying mine spoil. Surface water, soil water, and groundwater were monitored for 29 water-quality parameters for one year. Rainfall, air temperature, runoff, and water-level elevation data were collected also. Detailed analysis of the data indicates that the dredged material used in this study does not adversely affect water quality; it supports abundant plant growth, lessens groundwater contamination, and controls acid runoff. The dredged material is judged to be a suitable material for use in reclamation of surface-mined land.

  11. A study of the performance of a reclamation soil cover placed over an oilsands coke deposit

    Energy Technology Data Exchange (ETDEWEB)

    Fenske, D.S.; Barbour, S.L. [Saskatchewan Univ., Saskatoon, SK (Canada). Dept. of Civil Engineering; Qualizza, C. [Syncrude Canada Ltd., Fort McMurray, AB (Canada)

    2006-07-01

    Coke is a solid, carbonaceous residue that forms during the cracking of high-boiling point distillates and is one of the by-products of petroleum extraction from oilsands. Coke is known as a possible future energy source and therefore, must be stored within the reclaimed landscape in a form that allows it to be recovered. In addition, it also could be used as a low-density capping material over soft tailings. This paper presented the results of a study that examined the effects of coke in the environment. The study involved construction of two small instrumented watersheds at Syncrude Canada's Mildred Lake Settling Basin. Preliminary field data, highlighting the moisture dynamics within the covers and the underlying coke were discussed. Sand tailings underlie the hydraulically placed coke deposit. Overlying the coke were two different reclamation soil covers constructed of a peat/mineral mix over glacial or glacial lacustrine soils. Placing the finer textured soil cover over coarser grained coke produced a textural or capillary break which enhanced moisture storage for plant use while minimizing deep percolation of infiltrating water. The site has been instrumented with a meteorological station; automated soil stations to monitor suction, water content and temperature through the cover profile; lysimeters to collect net percolation; access tubes for water content monitoring; gas sampling points at depth in the coke; and standpipe piezometers to monitor water chemistry and total head in the coke at depth. 10 refs., 2 tabs., 16 figs.

  12. Agricultural reuse of municipal wastewater through an integral water reclamation management.

    Science.gov (United States)

    Intriago, Juan Carlo; López-Gálvez, Francisco; Allende, Ana; Vivaldi, Gaetano Alessandro; Camposeo, Salvatore; Nicolás Nicolás, Emilio; Alarcón, Juan José; Pedrero Salcedo, Francisco

    2018-05-01

    The DESERT-prototype, a state-of-the-art compact combination of water treatment technologies based on filtration and solar-based renewable energy, was employed to reclaim water for agricultural irrigation. Water reclaimed through the DESERT-prototype (PW) from a secondary effluent of a wastewater treatment plant, as well as conventional irrigation water (CW) and the secondary effluent (SW) itself, were employed to cultivate baby romaine lettuces in a greenhouse in Murcia (Spain), by means of drip and sprinkler irrigation methods, thus establishing six treatments. Assessments of physicochemical and microbiological quality of irrigation water, as well as agronomic and microbiological quality of crops from all treatments, showed that results associated to PW complied in all cases with relevant standards and guidelines. In contrast, results linked to SW and CW presented certain non-compliance cases of water and crop microbiological quality. These assessments lead to conclude that the DESERT-prototype is an appropriate technology for safe water reclamation oriented to agricultural production, that can be complemented by a proper irrigation method in reaching safety targets. Copyright © 2018 Elsevier Ltd. All rights reserved.

  13. Reclamation of Cr-contaminated or Cu-contaminated agricultural soils using sunflower and chelants.

    Science.gov (United States)

    Cicatelli, Angela; Guarino, Francesco; Castiglione, Stefano

    2017-04-01

    Chromium (Cr) and copper (Cu) are pollutants with a strong environmental impact. "Green biotechnology" as phytoremediation represents a sustainability opportunity for soil reclamation. In this study, we evaluated the possibility to reclaim agricultural soils located in the Solofrana valley, contaminated by Cr or Cu. Chromium contamination derives by repeated flooding events of Solofrana rivers containing Cr because of leather tanning plants, while Cu soil pollution was due to the use of Cu-rich pesticides in agriculture. Both metals showed a very low bioavailability. In order to perform an assisted phytoremediation of polluted fields, we carried out a preliminary ex situ experimentation testing for the first time sunflowers (cv. Pretor) and chelants (ethylenediaminetetraacetic acid (EDTA) and/or ethylene diamine disuccinate (EDDS)), useful when metal bioavailability is low. No symptoms of toxicity were observed in sunflowers grown on both soils, while biomass was improved when EDDS was added. Cr and Cu bioavailability was only slightly enhanced by chelants at the end of the treatments. Both Cr and Cu were mainly accumulated in the roots; moreover, Cu was also translocated to the aboveground organs in the presence of EDTA. The ex situ experimentation demonstrated that assisted phytoremediation is a very slow process not useful in the case of persistent pollution.

  14. Micropollutants removal and health risk reduction in a water reclamation and ecological reuse system.

    Science.gov (United States)

    Ma, Xiaoyan Y; Li, Qiyuan; Wang, Xiaochang C; Wang, Yongkun; Wang, Donghong; Ngo, Huu Hao

    2018-07-01

    As reclaimed water use is increasing, its safety attracts growing attention, particularly with respect to the health risks associated with the wide range of micropollutants found in the reclaimed water. In this study, sophisticated analysis was conducted for water samples from a water reclamation and ecological reuse system where domestic wastewater was treated using an anaerobic-anoxic-oxic unit followed by a membrane bioreactor (A 2 O-MBR), and the reclaimed water was used for replenishing a landscape lake. A total of 58 organic micropollutants were detected in the system, consisting of 13 polycyclic aromatic hydrocarbons (PAHs), 16 phenols, 3 pesticides, and 26 pharmaceuticals and personal care products (PPCPs). After treatment by the A 2 O-MBR process, effective removal of pesticides and phenols was achieved, while when the reclaimed water entered the landscape lake, PPCPs were further removed. From the physicochemical properties of micropollutants, it could be inferred that phenols and dichlorphos (the only pesticide with considerable concentration in the influent) would have been mainly removed by biodegradation and/or volatilization in the biological treatment process. Additionally, it is probable that sludge adsorption also contributed to the removal of dichlorphos. For the predominant PPCP removal in the landscape lake, various actions, such as adsorption, biodegradation, photolysis, and ecologically mediated processes (via aquatic plants and animals), would have played significant roles. However, according to their logK oc , logK ow and logD (pH = 8) values, it could be concluded that adsorption by suspended solids might be an important action. Although carcinogenic and non-carcinogenic risks associated with all the detected micropollutants were at negligible levels, the hazard quotients (HQs) of PPCPs accounted for 92.03%-97.23% of the HQ Total . With the significant removal of PPCPs through the ecological processes in the landscape lake, the safety

  15. 43 CFR 422.10 - Requirements for authorizing officers to exercise Reclamation law enforcement authority.

    Science.gov (United States)

    2010-10-01

    ... domestic violence, preventing him/her from possessing a firearm in compliance with section 658 of Public... orientation session developed by Reclamation to become familiar with Federal laws and procedures and with all...

  16. 30 CFR 884.13 - Content of proposed State reclamation plan.

    Science.gov (United States)

    2010-07-01

    ... reclamation program, the Rural Abandoned Mine Program administered by the Soil Conservation Service, the... wildlife and their habitat. [47 FR 28600, June 30, 1982, as amended at 73 FR 67642, Nov. 14, 2008] ...

  17. Coal Mines, Reclamation Sites - Mine Drainage Treatment/Land Recycling Project Locations

    Data.gov (United States)

    NSGIC Education | GIS Inventory — Mine Drainage Treatment/Land Reclamation Locations are clean-up projects that are working to eliminate some form of abandoned mine. The following sub-facility types...

  18. Study on the cumulative impact of reclamation activities on ecosystem health in coastal waters.

    Science.gov (United States)

    Shen, Chengcheng; Shi, Honghua; Zheng, Wei; Li, Fen; Peng, Shitao; Ding, Dewen

    2016-02-15

    The purpose of this study is to develop feasible tools to investigate the cumulative impact of reclamations on coastal ecosystem health, so that the strategies of ecosystem-based management can be applied in the coastal zone. An indicator system and model were proposed to assess the cumulative impact synthetically. Two coastal water bodies, namely Laizhou Bay (LZB) and Tianjin coastal waters (TCW), in the Bohai Sea of China were studied and compared, each in a different phase of reclamations. Case studies showed that the indicator scores of coastal ecosystem health in LZB and TCW were 0.75 and 0.68 out of 1.0, respectively. It can be concluded that coastal reclamations have a historically cumulative effect on benthic environment, whose degree is larger than that on aquatic environment. The ecosystem-based management of coastal reclamations should emphasize the spatially and industrially intensive layout. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. In-Place Recycling and Reclamation of Asphaltic Concrete Pavements in Kentucky

    Science.gov (United States)

    2017-11-01

    Full-depth reclamation has been defined by the Asphalt Recycling and Reclaiming Association as a rehabilitation technique in which the full thickness of the asphalt pavement and a predetermined portion of the underlying material (base, subbase, an...

  20. Determination of optimal environmental policy for reclamation of land unearthed in lignite mines - Strategy and tactics

    Science.gov (United States)

    Batzias, Dimitris F.; Pollalis, Yannis A.

    2012-12-01

    In this paper, optimal environmental policy for reclamation of land unearthed in lignite mines is defined as a strategic target. The tactics concerning the achievement of this target, includes estimation of optimal time lag between each lignite site (which is a segment of the whole lignite field) complete exploitation and its reclamation. Subsidizing of reclamation has been determined as a function of this time lag and relevant implementation is presented for parameter values valid for the Greek economy. We proved that the methodology we have developed gives reasonable quantitative results within the norms imposed by legislation. Moreover, the interconnection between strategy and tactics becomes evident, since the former causes the latter by deduction and the latter revises the former by induction in the time course of land reclamation.

  1. The impacts of land reclamation on suspended-sediment dynamics in Jiaozhou Bay, Qingdao, China

    Science.gov (United States)

    Gao, Guan Dong; Wang, Xiao Hua; Bao, Xian Wen; Song, Dehai; Lin, Xiao Pei; Qiao, Lu Lu

    2018-06-01

    A three-dimensional, high-resolution tidal model coupled with the UNSW sediment model (UNSW-Sed) based on Finite Volume Coastal Ocean Model (FVCOM) was set up to study the suspended-sediment dynamics and its change in Jiaozhou Bay (JZB) due to land reclamation over the period 1935 to 2008. During the past decades, a large amount of tidal flats were lost due to land reclamation. Other than modulating the tides, the tidal flats are a primary source for sediment resuspensions, leading to turbidity maxima nearshore. The tidal dynamics are dominant in controlling the suspended-sediment dynamics in JZB and have experienced significant changes with the loss of tidal flats due to the land reclamation. The sediment model coupled with the tide model was used to investigate the changes in suspended-sediment dynamics due to the land reclamation from 1935 to 2008, including suspended-sediment concentrations (SSC) and the horizontal suspended-sediment fluxes. This model can predict the general patterns of the spatial and temporal variation of SSC. The model was applied to investigate how the net transport of suspended sediments between JZB and its adjacent sea areas changed with land reclamation: in 1935 the net movement of suspended sediments was from JZB to the adjacent sea (erosion for JZB), primarily caused by horizontal advection associated with a horizontal gradient in the SSC; This seaward transport (erosion for JZB) had gradually declined from 1935 to 2008. If land reclamation on a large scale is continued in future, the net transport between JZB and the adjacent sea would turn landward and JZB would switch from erosion to siltation due to the impact of land reclamation on the horizontal advection of suspended sediments. We also evaluate the primary physical mechanisms including advection of suspended sediments, settling lag and tidal asymmetry, which control the suspended-sediment dynamics with the process of land reclamation.

  2. Cultural keystone species in oil sands mine reclamation, Fort McKay, Alberta, Canada

    Energy Technology Data Exchange (ETDEWEB)

    Garibaldi, A.; Straker, J. [Stantec Ltd., Sidney, BC (Canada)

    2009-07-01

    Cultural keystone species (CKS) shape the cultural identify of people through the roles they have in diet, material and spiritual practices. The use of the CKS concept is regarded as a method of addressing linked social and ecological issues. This paper presented the results of using the CKS model in the indigenous community of Fort McKay, Alberta to address, social, ecological and spiritual values in regional mine-land reclamation. Fort McKay is at the epicenter of the existing mine developments. Its residents regard human and environmental health to be be linked and therefore experience the effects of development and subsequent reclamation on both cultural and ecological levels. The community is actively engaged in working with the local mining companies on issues of mine reclamation design. In order to hold meaning to the local people, oil sand operators used the CKS concept in their reclamation efforts to take into account ecological functionality and also address the linked social factors. Five CKS were identified through a literature review and extensive community interviews. The list includes moose, cranberry, blueberry, ratroot and beaver. These 5 CKS were used to focus discussions and make recommendations for relevant land reclamation within Fort McKay traditional territory. The project has influenced the way both the community and oil sands operators engage with reclamation. Lessons learned from this process will help direct reclamation activities on other portions of traditional territory, while offering guidance to other regional developers for addressing cultural values in reclamation on their leases. 15 refs., 1 fig.

  3. Disputes over science and dispute resolution approaches - A survey of Bureau of Reclamation employees

    Science.gov (United States)

    Burkardt, Nina; Ruell, Emily W.

    2012-01-01

    Water resources in parts of the Western United States are over-allocated, which intensifies the pressure to support water management decisions with strong scientific evidence. Because scientific studies sometimes provide uncertain or competing results or recommendations, science can become a source of disputes during decision-making processes. The Bureau of Reclamation (Reclamation) is an important water manager in the Western United States, and Reclamation decision processes are often contested by a variety of affected constituencies. We conducted a Web-based survey of Reclamation employees to determine (1) which types of disputes over science are occurring and how common they are, (2) which approaches have been used by Reclamation to try to resolve these different types of disputes, (3) how useful Reclamation employees find these approaches at resolving these types of disputes, (4) the final outcomes of these disputes and the decision-making processes that were hindered by the disputes over science, and (5) the potential usefulness of several different types of dispute resolution resources that Reclamation could provide for employees that become involved in disputes over science. The calculated minimum response rate for the survey was 59 percent. Twenty-five percent of respondents indicated that they had been involved in a dispute over science while working at Reclamation. Native species and species listed under the Endangered Species Act of 1973 were the most common issue types reported in these disputes over science. Survey respondents indicated that they used a variety of approaches to resolve disputes over science and rated most approaches as either neutral or somewhat helpful in these endeavors. Future research is needed to determine whether there are additional variables underlying these disputes that were not measured in this survey that may identify when dispute resolution methods are most effective, or whether resolving aspects of these disputes, such as

  4. Assessment of post forest fire reclamation in Algarve, Portugal

    Science.gov (United States)

    Andrade, Rita; Panagopoulos, Thomas; Guerrero, Carlos; Martins, Fernando; Zdruli, Pandi; Ladisa, Gaetano

    2014-05-01

    Fire is a common phenomenon in Mediterranean landscapes and it plays a crucial role in its transformations, making the determination of its impact on the ecosystem essential for land management. During summer of 2012, a wildfire took place in Algarve, Portugal, on an area mainly covered by sclerophyllous vegetation (39.44%, 10080ha), broad-leaved forest (20.80%, 5300ha), agriculture land with significant areas of natural vegetation (17.40%, 4400ha) and transitional woodlands-shrubs (16.17%, 4100ha). The objective of the study was to determine fire severity in order to plan post-fire treatments and to aid vegetation recovery and land reclamation. Satellite imagery was used to estimate burn severity by detecting physical and ecological changes in the landscape caused by fire. Differenced Normalized Burn Ratio (DNBR) was used to measure burn severity with pre and post fire data of four Landsat images acquired in October 2011, February and August 2012 and April 2013. The initial and extended differenced normalized burn ratio (DiNBR and DeNBR) were calculated. The calculated burned area of 24291 ha was 552ha lower than the map data determined with field reports. The 19.5% of that area was burned with high severity, 45% with moderate severity and 28.3% with low severity. Comparing fire severity and regrowth with land use, it is shown in DiNBR that the most severely burned areas were predominantly sclerophyllous vegetation (37.6%) and broad-leaved forests (31.1%). From the DeNRB it was found that the reestablishment of vegetation was slower in mixed forests and higher in sclerophyllous vegetation and in land with significant areas of natural vegetation. Faster recovery was calculated for the land uses of sclerophyllous vegetation (46.7%) and significant regrowth in areas of natural vegetation and lands occupied by agriculture (25.4%). Next steps of the study are field validation and crossing with erosion risk maps before to take land reclamation decisions.

  5. Seismic waves travel-time curve, basing on the results of signal detection from chemical explosions detonated at Semipalatinsk Test Site

    International Nuclear Information System (INIS)

    Mikhajlova, N.N.; Aristova, I.L.; Germanova, T.I.

    2001-01-01

    A large amount of digital seismic data from the permanent and temporary seismic stations was acquired in the result of detonation of large chemical explosions at Semipalatinsk Test Site. All the records were collected, systematized and processed, and databases were created. Travel-time curves for regional Pn, Pg, Sn and Lg waves were created and compared with the ones used in routine earthquake processing practice. (author)

  6. Traveltime and waveform tomography analysis of synthetic borehole seismic data based on the CO2SINK project site, Germany

    Science.gov (United States)

    Yang, Can; Fan, Wenfang; Juhlin, Christopher

    2010-05-01

    Time lapse analysis of seismic data is very important for CO2 storage projects. Therefore, we have tested traveltime and waveform tomography methods to detect velocity changes in a CO2 injection reservoir using synthetic time lapse data. The structural model tested is based on the CO2SINK injection site at Ketzin, Germany where CO2 is being injected at about 630-650 m into a saline aquifer. First, we created synthetic time lapse moving source profiling (MSP) data, also known as walkaway profiling. The velocity model used for modeling was based on well logging and lithological information in the injection borehole. Gassmann fluid substitution was used to calculate the reservoir velocity after injection. In this substitution, we assumed a saturation of CO2 of 30%. The model velocity of the reservoir changed from 2750 m/s (before injection) to 2150 m/s (after injection). A 2D finite difference code available in Seismic Unix (www.cwp.mines.edu) was used. 60 source points were distributed along a surface line. The distance from the injection well was between 150m and 858m, with an interval of 12m. We recorded 21 channels at receiver depths from 470m to 670m, with an interval of 10m. The injection layer was assumed to be between 629m and 650m depth. The wavelet used for the synthetic data was a Gaussian derivative with an average frequency of 60Hz. Then first arrivals were picked on both data sets and used as input data for traveltime tomography. For traveltime tomography, the PS_tomo program was used. Since no data were recorded above 470m, the initial velocity model used above this depth was the true velocity model. Below 470m, the initial velocity model increases linearly from 3000m/s to 3250m/s. After inversion, the reservoir velocity and an anhydrite layer (high velocity layer) can be seen clearly in the final inverted velocity models. Using these velocity models as starting models, we performed waveform tomography in the frequency domain using a program supplied by

  7. Problems getting from the laboratory to the field: Reclamation of an AML site

    International Nuclear Information System (INIS)

    Dick, W.A.; Stehouwer, R.C.

    1994-01-01

    Acid and toxic abandoned mineland sites provide an opportunity whereby flue gas desulfurization (FGD) by-product can be beneficially used as a reclamation amendment material. Studies are needed to compare the effectiveness of FGD by-product, as compared with resoil, for reclamation purposes. Initial studies provided information about the chemical and physical properties of the FGD by-product and how to transport and blend the FGD by-product with yard waste compost. Greenhouse studies indicated that rates of 125 dry tons/acre of FGD and 50 dry tons/acre of yard waste compost would provide optimum results for reclamation of acid and toxic spoil contained at the Fleming abandoned mineland (AML) site. Their results showed that heavy metal loading rates were much lower using the FGD/compost mixture than using resoil material. Dioxin in the mixture was also less than the 5 ppt level considered as normal background. The technical problems of using FGD by-product for reclamation of an AML site were solved. However, considerable efforts to educate the public about the merits of reclaiming the Fleming AML site using this FGD/compost mixture were required before initiating field reclamation activities. Education efforts must continue if FGD by-products are to achieve general acceptance as a reclamation alternative to resoil in cases where resoil is of scarce supply

  8. Reclamation planning for abandoned mining subsidence lands in eastern China: a case study

    International Nuclear Information System (INIS)

    Hu, Z.; Gu, H.

    1995-01-01

    China has a long history of coal mining and more than 96% of coal output is taken from underground mines each year. With the excavation of coal from underground, severe subsidence often results, which produces many subsidence lands. This paper explores the principle and methods of reclamation planning for abandoned mining subsidence lands and presents a case study in eastern China. A 373 ha of abandoned mining subsidence land in Anhui province was selected as an experiment site. Since China is a developing country and land shortage is severe in this area, the high economic benefits from the reclaimed land was the final reclamation goal. Based on the topography of subsidence lands, some parts of the abandoned lands were lands or lake-like troughs, restoring farmlands and fishponds were chosen as post-reclamation land uses. The elevation of reclaimed lands was the key for restoring farmland successfully because of the high underground water level in this area, and the optimum fishpond size and side-slope design were the keys to reach high reclamation income. The HDP (Hydraulic Dredge Pump) reclamation technique was used for restoring farmland and creating fishpond. A farming and aquaculture plan for high economic benefits was also designed. This project will make farmers, who own the lands, richer through reclamation. 3 refs., 5 figs., 1 tab

  9. Investigation of the Results of Combined Reclamation on the Particular Stages of Grain Matrix Recovery

    Directory of Open Access Journals (Sweden)

    Łucarz M.

    2016-12-01

    Full Text Available In this article, there were presented the results of research on combined mechanical and thermal regeneration of waste moulding sand with furfuryl resin originated from one of national foundries manufacturing aluminium alloys castings. Attempts of mechanical reclamation were led on the REGMAS reclaimer enabling to realize preliminary and primary reclamation with use of two modes of mechanical interactions on waste moulding sand. In the first attempt the reclaimer worked without any additional regenerating elements, and as the second solution, the reclaimer operated with additional crushing and abrasive elements to increase the result of primary reclamation. Thermal reclamation was led in the prototypic thermal reclaimer, enabling to fully control the process of grain matrix recovery. As a result of completed investigations the small efficiency of mechanical reclamation was determined. However, use of combined regeneration allowed for obtaining grain matrix of high purity. Thermal regeneration was conducted in prototypic thermal reclaimer. Evaluation of reclaim (reclaimed material quality was carried out in the way of iginition losses and grain-size analysis, surface morphology and also by executing of strength testing of moulding sand prepared on obtained grain matrix for the particular reclamation operations.

  10. An introduction to conservation and reclamation at Alberta's mineable oil sands

    Energy Technology Data Exchange (ETDEWEB)

    Richens, T. [Alberta Environment, Edmonton, AB (Canada)

    2009-07-01

    This paper presented a balanced view of the conservation and reclamation issues and challenges facing oil sands development in Alberta. Bitumen is recovered by truck and shovel in the shallow oil sands of the Athabasca region. The deeper deposits in the Athabasca, Peace River and Cold Lake regions are accessed primarily using a system of horizontal wells and steam to extract the bitumen from the sand and pump it to the surface. Individual in-situ operations have a smaller environmental impact than mines, and do not produce tailings ponds. However, the footprint of in-situ facilities will accumulate over time because of the potential for extensive future development. The key issues facing conservation and reclamation in the mineable oil sands were discussed. Summary statistics on land disturbed and reclaimed in the region were also provided. The challenges facing reclamation activities include long timeframes; large scale, regional planning and integration; competing land use goals; revegetation; byproduct management; and tailings and process-affected water. Multi-stakeholder forums have proven to be the key to the progression of monitoring, research and development and the sharing of knowledge and information. Frameworks have been developed for the assessment of pre-disturbed and reclaimed soil capability specific to the oil sands region. Additional resources are also available, such as guidelines for the reclamation of terrestrial and wetland habitats that represent the best management practices for reclamation research in revegetation, soil salvage, stockpiling and placement, tailings reclamation, end pit lakes, wetlands and biodiversity. 16 refs., 1 fig.

  11. Canadian Natural Resources Limited uses Siteview(TM) to manage its reclamation sites

    International Nuclear Information System (INIS)

    Holtby, L.

    2003-01-01

    Implementation of the Siteview(TM) computer software package designed to capture and manage reclamation data, by Canadian Natural Resources Limited is reported. Use of this software, developed by Pelodon Computer Enterprises in Calgary, enables Canadian Natural Resources to track from a single file data from each of over 3000 sites from the pre-construction stage right through to the final reclamation. Having all data in a single file permits the company to track the number of Reclamation Certificate applications submitted and received for a specific time period, helping them to capture the liability reduction and rental reduction associated with those sites and in general, manage their reclamation program more efficiently. Tracking the reclamation sites is by specific Site Status Codes, which allow the company to quickly determine current status of each site. Budgeting for reclamation can also be planned more accurately based on the current status of sites. Siteview(TM) also manages waste disposal information in the Guide 50 Drilling Waste Disposal Notification forms by digitally inputting all required data such as waste disposal location, mud system, and the volume of mud, and generating reports based on various waste disposal parameters. The software is also used by environmental consultants to track client's well site operations, and display them graphically in their reports, thus providing value-added services to their clients

  12. An exploration of Bureau of Reclamation approaches for managing conflict over diverging science

    Science.gov (United States)

    Burkardt, Nina; Ruell, Emily; Clark, Douglas

    2008-01-01

    As a major institutional agent supplying Western water resources, the Bureau of Reclamation (Reclamation) provides important leadership, technical, and financial resources in water management, serving as the West's "water broker" (Bowersox 2000; Pisani 2003). In recent years, growing numbers of constituencies using water and the over-allocation of water resources have contributed to conflict over the resource in the American West (National Research Council 2004). Although the conflicts arise from many sources, one common theme is that Reclamation managers often must make decisions about water use and allocation when scientific studies provide uncertain or competing recommendations. We conducted a preliminary study of Reclamation water managers and water scientists to try to understand the approaches or techniques they use or consider useful for dealing with scientific conflicts over water allocation and how these compare to techniques found in the relevant literature. We report the results of (1) an electronic survey of Reclamation senior managers and (2) a panel discussion amongst Reclamation senior managers as to the current institutional capabilities for managing diverging scientific findings in water dispute resolution processes. We conclude with a discussion of the strengths and weaknesses of the different tools and techniques managers reported in the survey and in the panel discussion.

  13. Neutron activation, k{sub 0-}- method, as a tool for Phytoremediation studies and reclamation of degraded areas

    Energy Technology Data Exchange (ETDEWEB)

    Uemura, George; Menezes, Maria Angela de Barros C. [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)]. E-mails: george@cdtn.br; menezes@cdtn.br

    2007-07-01

    Phytoremediation is a technology that can be considered as a relatively recent one, although it is based on knowledge that has been gathered and accumulated for a long time. One advantage of phytoremediation is its relatively low cost, but, as it must rely on plant growth, its results might be quite slow to be achieved, specially in countries with temperate climate, which is not the case of vast areas of Brazilian territory. One of the aims of phytoremediation is the search of plants that are hyperaccumulators, i.e., that are capable of accumulating pollutants and/or contaminants in high concentrations, of which the fern Pteris vittata is a fine example, considering arsenic accumulation. The possibilities of exploring Brazilian native flora for this purpose demand no further comments. The reclamation of degraded areas demands might not necessarily rely only on species and/or varieties that are hyperaccumulators, but also on taxa that are resistant to a given pollutant or a mixture of pollutants. In this case, a precise analysis of the environment is fundamental, specially to ascertain, for sure, that some toxic element is not present. In this work, species known to accumulate arsenic from Brazilian native flora like Indian mustard (Brassica juncea) and Mirabilis jalapa were grown and exposed to arsenic. After that, they were lyophilised and analysed by means of the k{sub 0-} standardization method using the TRIGA MARK I IPR-R1 reactor at CDTN/CNEN. Certified reference material were also analysed to verify the accuracy of the method. The advantages of neutron activation, k{sub 0-}method, a multi-elemental analysis technique, in phytoremediation and reclamation of degraded areas, are discussed in the present paper. (author)

  14. KLM's boric acid reclamation system (BARS). An update

    International Nuclear Information System (INIS)

    Schuelke, D.; Kniazewycz, B.G.; Markind, J.; Brossart, M.A.; Choi, R.C.

    1987-01-01

    KLM Technologies has implemented its Department of Energy Phase II Small Business Innovative Research (SBIR) demonstration program for a radioactive waste Boric Acid Reclamation System (BARS). Preliminary performance indicates enhanced treatment by the BARS technique over state of the art process methods for selective removal of silica and other impurities from borated water matrices. At optimal system recovery of 96-97 percent. BARS removes nominal levels of boric acid while achieving significant rejection for soluble silica and selective radioisotopes. This is indicative of superior performance compared to existing data governing standard boric acid process treatment in the presence of silica and other contaminants. Conventional technologies have also proven to be relatively expensive, utilizing costly chemically treated disposable resins for primary waste removal. The overall BARS program indicates substantial savings regarding off-site disposal costs based on reduced waste generation. Optimization of the BARS technology could have potential impact on conventional process technologies that are essentially non-selective in removal capacities. Within the scope of the project, a variety of contaminated process stream and mixed radwaste sources have been evaluated at Northern States Power's Prairie Island Nuclear Generating Station. The design of an advanced prototype BARS as an optimized process alternative was the result of KLM's initial Phase 1 SBIR program with the DOE in 1984 and 1985

  15. KLM's Boric Acid Reclamation System (BARS): An update

    International Nuclear Information System (INIS)

    Schuelke, D.; Kniazewycz, B.G.; Markind, J.; Brossart, M.A.; Choi, R.C.

    1987-02-01

    KLM Technologies has implemented its Department of Energy Phase II Small Business Innovative Research (SBIR) demonstration program for a radioactive waste Boric Acid Reclamation System (BARS). Preliminary performance indicates enhanced treatment by the BARS technique over state of the art process methods for selective removal of silica and other impurities from borated water matrices. At optimal system recovery of 96 to 97%, BARS removes nominal levels of boric acid while achieving significant rejection for soluble silica and selective radioisotopes. This is indicative of superior performance compared to existing data governing standard boric acid process treatment in the presence of silica and other contaminants. Conventional technologies have also proven to be relatively expensive, utilizing costly chemically treated disposable resins for primary waste removal. The overall BARS program indicates substantial savings regarding off-site disposal costs based on reduced waste generation. Optimization of the BARS technology could have potential impact on conventional process technologies that are essentially non-selective in removal capacities. 2 figs

  16. Waste water integrated reclamation system in the University of the Balearic Islands; Sistema integral de depuracion de aguas residuales en la Universitat de les Illes Balears

    Energy Technology Data Exchange (ETDEWEB)

    Amengual Morro, C.; Moya Niell, G.; Forss Sanchez, A.

    2007-07-01

    In 2001, the University of the Balearic Island carried out a project on the reclamation and reuse of wastewater in an extensive system. the system is composed of three phases: waste stabilization ponds, wetland and planted tree filters. the first phase is now complete. We show the preliminary data which characterised the ponds including those where floating macrophyte Eichhornia carssipes) were used, paying specific attention to the operation and maintenance. finally this study is centred on the thermal stratification and temperature inversion in relation with the generation of odours. (Author) 22 refs.

  17. Workflow for near-surface velocity automatic estimation: Source-domain full-traveltime inversion followed by waveform inversion

    KAUST Repository

    Liu, Lu

    2017-08-17

    This paper presents a workflow for near-surface velocity automatic estimation using the early arrivals of seismic data. This workflow comprises two methods, source-domain full traveltime inversion (FTI) and early-arrival waveform inversion. Source-domain FTI is capable of automatically generating a background velocity that can kinematically match the reconstructed plane-wave sources of early arrivals with true plane-wave sources. This method does not require picking first arrivals for inversion, which is one of the most challenging aspects of ray-based first-arrival tomographic inversion. Moreover, compared with conventional Born-based methods, source-domain FTI can distinguish between slower or faster initial model errors via providing the correct sign of the model gradient. In addition, this method does not need estimation of the source wavelet, which is a requirement for receiver-domain wave-equation velocity inversion. The model derived from source-domain FTI is then used as input to early-arrival waveform inversion to obtain the short-wavelength velocity components. We have tested the workflow on synthetic and field seismic data sets. The results show source-domain FTI can generate reasonable background velocities for early-arrival waveform inversion even when subsurface velocity reversals are present and the workflow can produce a high-resolution near-surface velocity model.

  18. Investigation of clay sediments and bedrock morphology in caves with seismic traveltime tomography: an application at Alepotrypa Cave (Diros, Greece

    Directory of Open Access Journals (Sweden)

    Lazaros Polymenakos

    2017-01-01

    Full Text Available The deposition of unconsolidated clay sediments in caves, in relation to the buried morphology of the karstic conduit, are important parameters for the study of cave evolution. We introduce the application of an active seismic imaging technique to investigate the clay deposits and bedrock morphology in caves. Seismic traveltime tomography, applied for the first time in cave studies, can assist with the interpretation of cave geomorphology. Utilizing the P-wave velocity contrast between the clay sediments and the surrounding rock mass, we map the buried rock surface and significant sediment interfaces and provide an estimate of the sediment thickness and volume. Our study focuses on the Alepotrypa Cave located in Diros (Peloponnese, Greece, revealing important information for the evolution of the cave. The proposed technique could be applied in caves with significant clay deposits, in order to constrain the clay volume and reconstruct the buried floor shape of the cave. The technique exploits fully the ground morphology and access points in a cave, so it is suitable for a detailed three-dimensional exploration of cave deposits and the underlying cave morphology.

  19. Renewed mining and reclamation: Imapacts on bats and potential mitigation

    Energy Technology Data Exchange (ETDEWEB)

    Brown, P.E. [Univ. of California, Los Angeles, CA (United States); Berry, R.D. [Brown-Berry Biological Consulting, Bishop, CA (United States)

    1997-12-31

    Historic mining created new roosting habitat for many bat species. Now the same industry has the potential to adversely impact bats. Contemporary mining operations usually occur in historic districts; consequently the old workings are destroyed by open pit operations. Occasionally, underground techniques are employed, resulting in the enlargement or destruction of the original workings. Even during exploratory operations, historic mine openings can be covered as drill roads are bulldozed, or drills can penetrate and collapse underground workings. Nearby blasting associated with mine construction and operation can disrupt roosting bats. Bats can also be disturbed by the entry of mine personnel to collect ore samples or by recreational mine explorers, since the creation of roads often results in easier access. In addition to roost disturbance, other aspects of renewed mining can have adverse impacts on bat populations, and affect even those bats that do not live in mines. Open cyanide ponds, or other water in which toxic chemicals accumulate, can poison bats and other wildlife. The creation of the pits, roads and processing areas often destroys critical foraging habitat, or change drainage patterns. Finally, at the completion of mining, any historic mines still open may be sealed as part of closure and reclamation activities. The net result can be a loss of bats and bat habitat. Conversely, in some contemporary underground operations, future roosting habitat for bats can be fabricated. An experimental approach to the creation of new roosting habitat is to bury culverts or old tires beneath waste rock. Mining companies can mitigate for impacts to bats by surveying to identify bat-roosting habitat, removing bats prior to renewed mining or closure, protecting non-impacted roost sites with gates and fences, researching to identify habitat requirements and creating new artificial roosts.

  20. Using Native Plants in the Reclamation of Areas Affected of Mining Activities in the Rodrigatos River Valley (El Bierzo, Leon, Spain); Aplicacion de Flora Autoctona en la Recuperacion de Zonas Afectadas por la Mineria en el Valle del Rio Rodrigatos (El Bierzo, Leon, Espana).

    Energy Technology Data Exchange (ETDEWEB)

    Galean, L; Gamarra, R; Sainz, H; Millan, R

    2010-07-27

    It is difficult for sites affected by mining to be colonized by vegetation and thus they suffer a slow recovery to a healthy ecosystem and, as a result, restoration work is necessary. The aim of this report is to propose a set of native species which are conducive to establishing a stable and self-sufficient plant community that will protect the soil and contribute to the rapid integration into the landscape of the areas affected by mining in the upper basin of the river Rodrigatos in the region of El Bierzo (Leon) An analysis of plant communities was undertaken using the phyto sociological method of Braun-Blanquet in order to subsequently select, using ecological criteria, the most suitable species for revegetation. Plant mapping using ortho photos was also developed in order to identify and delineate the location of the different landscape units. Among candidate species, in the first revegetation phase, we suggest a variety of herbs that are able to fix soils and protect them from erosion; species of the genus Cytisus and Genista in areas of moderate slope and species such as Rumex induratus Boiss and Reuter, Erysimum linifolium (Pourr. Ex Pers .) Jay in steeper areas because of their rooting ability. In later stages, the introduction of tree species characteristic for each formation is recommended. Furthermore, in the riverside areas species such as Carex elata subsp.reuteriana (Boiss.) Lucen and Aedo, Alnus glutinosa (L.) and Salix atrocinerea Brot. are proposed for introduction from the fi rst stage onwards. The species proposed in this study include some not commonly used in restoration, so a subsequent more detailed study would be required in order to assess their degree of suitability for this use. (Author) 65 refs.

  1. Inventory of past DOE land disturbance, Yucca Mountain, Nevada, and estimated general reclamation costs

    International Nuclear Information System (INIS)

    1989-04-01

    Since 1976, DOE preliminary investigations for a high level nuclear waste repository at Yucca Mountain, Nevada, have caused widespread disturbances of the landscape. This report addresses the areal extent of those disturbances that have accrued up to June 1988, and identifies expected associated reclamation costs. It was first necessary to identify disturbances, next to classify them for reclamation purposes, and, then, to assign general reclamation costs. The purposes of the analysis were: (1) to establish the amount of disturbance that already exists in the area of Yucca Mountain in order to identify alterations of the landscape that comprise the existing baseline conditions; (2) to identify estimated general reclamation costs for repair of the disturbances; (3) to provide information needed to establish disturbance models, and eventually environmental impact models, that can be applied to future DOE activities during Site Characterization and later phases of repository development, if they occur, and (4) to provide indicators of the needs for reclamation of future disturbances created by DOE's Site Characterization program. Disturbances were estimated using measurements from June 1988, large scale color aerial photography. Two reconnaissance site visits were also conducted. The identified disturbance totals by type are displayed in tabular form in the appendices. 84 refs., 2 figs., 9 tabs

  2. Competitive effects of introduced annual weeds on some native and reclamation species in the Powder River Basin, Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    Allen, E.B.; Knight, D.H.

    1980-01-01

    Four experiments were conducted to examine the competitive effects of introduced annual weeds on certain native and reclamation species. The first experiment was initiated by discing three sites in the Powder River Basin, Wyoming, at three distances from introduced weed seed sources. Introduced weed colonization was greatest when a seed source was located nearby. Higher weed cover resulted in reductions of percent cover, density, and richness of the native species. The second experiment was conducted in the greenhouse and was designed to determine if there are changes in response of S. kali and the native grasses Agropyron smithii and Bouteloua gracilis to competition and water regime. Both grass species had lower biomass and higher stomatal resistance when growing in mixed culture with S. kali than in pure culture in the dry regime, but there were no significant differences in the wet regime. In general, the difference in plant response between mixed and pure cultures was more pronounced in the dry than in the wet regime. The third study was a greenhouse experiment on germination and competition of S. kali (a C/sub 4/ species) with native species Lepidium densiflorum (C/sub 3/), Chenopodium pratericola (C/sub 3/), A. smithii (C/sub 3/), and B. gracilis (C/sub 4/) under May, June, and July temperature regimes. Salsola kali germinated equally well in all three regimes, but the other C/sub 4/ species had highest germination in the July regime and the C/sub 3/ species in the May and June regimes. The fourth study was designed to examine the effect of weed colonization on the success of mine reclamation. Little effect was observed, but colonization by introduced annuals was very low. (ERB)

  3. THE DEVELOPMENT OF SYNTHETIC SOIL MATERIALS FOR THE SUCCESSFUL RECLAMATION OF ABANDONED MINED LAND SITES

    Energy Technology Data Exchange (ETDEWEB)

    Song Jin

    2006-03-01

    Abandoned mine sites associated with coal and metal mining across the western United States have been left as unproductive wastelands. The availability of soil materials or other materials to support the restoration of the vegetative cover and enhance the recovery of such areas is limited. The restoration of these areas often requires the use of available amendments such as organic waste products or to help stabilize the soil. Many of the organic waste products, including sewage sludge, clarifier sludge, fly ash sludge, and other by-products from the agricultural industries such as compost can be employed for beneficial uses. This study looked at the feasibility of applying organic waste products to a mine soil in Montana to increase soil fertility and enhance plant productivity. Waste rock samples were tested for acid forming potential via acid base accounting. Samples cores were constructed and leached with simulated rainwater to determine amendment affect on metal leaching. A greenhouse study was completed to determine the most suitable amendment(s) for the field mine land site. Results from the acid base accounting indicate that acid formed from the waste rock would be neutralized with the alkalinity in the system. Results also show that metals in solution are easily held by organics from the amendments and not allowed to leach in to the surrounding water system. Data from the greenhouse study indicated that the amendment of sewage sludge was most promising. Application of 2% sewage sludge along with 1% sewage sludge plus 1% clarifier sludge, 2% compost, and no treatment were used for mine land application. Initial results were encouraging and it appears that sewage sludge may be a good reclamation option for mine lands.

  4. Reclamation of the Domtar/Canada brick quarry using coal fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Hassan, P J

    1991-03-20

    Two power plants in the Toronto area required disposal sites for coal fly ash in the late 1970s. A local brick quarry was recognized as a potential disposal site, since a 10-hectare area of the quarry was no longer in production and was required to be filled for reclamation. Ontario Hydro and the brick company joined together to obtain approval for the landfilling project. The preliminary site investigations included an examination of the impact of the project on local residents and the environment in terms of traffic volumes, noise levels, road dirt, airborne dust, and contamination of surface water and groundwater. Ontario Environmental Assessment Board hearings were held, with evidence presented from concerned parties. The findings from the hearings indicated that the project would have little effect on nearby residents and would improve the local environment by reclaiming usable land. Filling of the quarry began in December 1981 and continued for 5 years, after which a total of over 680,000 tonnes of fly ash was deposited. After completion, the ash was covered with a seal layer consisting of at least 1 m of clay or till compacted to structural fill standards with a 1 m thick protective cover layer to protect the seal layer from desiccation cracking and frost heave. Material is currently being stockpiled at the site to increase the thickness of the protective layer in order to make the site self-managing. Monitoring of surface water and groundwater is still ongoing and will continue for many years. 17 refs., 24 figs., 7 tabs.

  5. Dry flue gas desulfurization byproducts as amendments for reclamation of acid mine spoil

    International Nuclear Information System (INIS)

    Dick, W.A.; Stehouwer, R.C.; Beeghly, J.H.; Bigham, J.M.; Lal, R.

    1994-01-01

    Development of beneficial reuses of highly alkaline, dry flue gas desulfurization (FGD) byproducts can impact the economics of adopting these FGD technologies for retrofit on existing powerplants. Greenhouse studies were conducted to evaluate the use of two dry FGD byproducts for reclamation of acid mine spoil (pH, 3.1 to 5.8). Treatment rates of FGD ranges from 0% to 32% by dry weight and most treatments also included 6% by dry weight of sewage sludge. Fescue (Festuca arundinacea Schreb.) was harvested monthly for a total of six harvests. Plant tissue composition and root growth were determined after the sixth harvest. Leachate analyses and pH determination of mixes were done at the beginning and end of the experiments. Both FGD byproducts were effective in raising the spoil pH and in improving fescue growth. At the highest FGD application rate, fescue growth decreased from the optimum due to high pH and reduced rooting volume caused by cementation reactions between the FGD and spoil. Trace elements, with the exception of B, were decreased in the fescue tissue when FGD was applied. Leachate pH, electrical conductivity, dissolved organic carbon, Ca, Mg, and S tended to increase with increased FGD application rate; Al, Fe, Mn, and Zn decreased. pH was the most important variable controlling the concentrations of these elements in the leachate. Concentrations of elements of environmental concern were near or below drinking water standard levels. These results indicate that FGD applied at rates equivalent to spoil neutralization needs can aid in the revegetation of acid spoil revegetation with little potential for introduction of toxic elements into the leachate water or into the food chain

  6. Description of concept and first feasibility test results of a life support subsystem of the Botany Facility based on water reclamation

    Science.gov (United States)

    Loeser, H. R.

    1986-01-01

    The Botany Facility allows the growth of higher plants and fungi over a period of 6 months maximum. It is a payload planned for the second flight of the Eureca platform around 1990. Major tasks of the Life Support Subsystem (LSS) of the Botany Facility include the control of the pressure and composition of the atmosphere within the plant/fungi growth chambers, control of the temperature and humidity of the air and the regulation of the soil water content within specified limits. Previous studies have shown that various LSS concepts are feasible ranging from heavy, simple and cheap to light, complex and expensive solutions. A summary of those concepts is given. A new approach to accomplish control of the temperature and humidity of the air within the growth chambers based on water reclamation is discussed. This reclamation is achieved by condensation with a heat pump and capillary transport of the condensate back into the soil of the individual growth chamber. Some analytical estimates are given in order to obtain guidelines for circulation flow rates and to determine the specific power consumption.

  7. Bio-Reclamation of Strategic and Energy Critical Metals from Secondary Resources

    Directory of Open Access Journals (Sweden)

    Sadia Ilyas

    2017-06-01

    Full Text Available Metals with an average crustal abundance of <0.01 ppm, which are high in supply shortage due to soaring demand, can, under the excessive environmental risk and <1% recycling rate of their production, be termed as ‘critical’ in a limited geo-boundary. A global trend to the green energy and low carbon technologies with geopolitical scenario is challenging for the sustainable reclamation of these metals from secondary resources. Among the available processes, bio-reclamation can be a sustainable technique for extracting and concentrating these metals. Therefore, in the present paper, the potential reclamation of critical metals (including rare earth elements, precious metals, and a common nuclear fuel element, uranium via their interaction with microbe/s has been reviewed.

  8. Costs of abandoned coal mine reclamation and associated recreation benefits in Ohio.

    Science.gov (United States)

    Mishra, Shruti K; Hitzhusen, Frederick J; Sohngen, Brent L; Guldmann, Jean-Michel

    2012-06-15

    Two hundred years of coal mining in Ohio have degraded land and water resources, imposing social costs on its citizens. An interdisciplinary approach employing hydrology, geographic information systems, and a recreation visitation function model, is used to estimate the damages from upstream coal mining to lakes in Ohio. The estimated recreational damages to five of the coal-mining-impacted lakes, using dissolved sulfate as coal-mining-impact indicator, amount to $21 Million per year. Post-reclamation recreational benefits from reducing sulfate concentrations by 6.5% and 15% in the five impacted lakes were estimated to range from $1.89 to $4.92 Million per year, with a net present value ranging from $14.56 Million to $37.79 Million. A benefit costs analysis (BCA) of recreational benefits and coal mine reclamation costs provides some evidence for potential Pareto improvement by investing limited resources in reclamation projects. Copyright © 2012 Elsevier Ltd. All rights reserved.

  9. Innovative wetland reclamation design case studies : the Suncor fen and pond 1 marsh

    Energy Technology Data Exchange (ETDEWEB)

    Daly, C.A. [Suncor Energy, Fort McMurray, AB (Canada); Price, J.; Rezanezhad, F. [Waterloo Univ., ON (Canada); Rochefort, L.; Graf, M. [Laval Univ., Quebec City, PQ (Canada); Russell, B. [BGC Engineering Inc., Calgary, AB (Canada)

    2010-07-01

    Suncor Energy Inc. is an energy company strategically focused in Canada's Athabasca oil sands region. The company has more than 40 years of experience in pioneering commercial development. This presentation discussed reclamation requirements for Suncor Energy. Reclamation objectives that were addressed in this presentation included operating approvals, biodiversity and meeting stakeholder expectations. Several photographs of reclaimed forest areas were shown along with 5 freshwater wetland types and wetland values. Two innovative wetland reclamation design case studies were also presented, described and illustrated, with particular reference to the Suncor fen and pond 1 marsh. It was concluded that future work will involve finalizing site investigation and designs, as well as construction, vegetation, and monitoring. figs.

  10. Coupled hydrodynamic and ecological simulation for prognosticating land reclamation impacts in river estuaries

    Science.gov (United States)

    Xu, Yan; Cai, Yanpeng; Sun, Tao; Yang, Zhifeng; Hao, Yan

    2018-03-01

    A multiphase finite-element hydrodynamic model and a phytoplankton simulation approach are coupled into a general modeling framework. It can help quantify impacts of land reclamation. Compared with previous studies, it has the following improvements: a) reflection of physical currents and suitable growth areas for phytoplankton, (b) advancement of a simulation method to describe the suitability of phytoplankton in the sea water. As the results, water velocity is 16.7% higher than that of original state without human disturbances. The related filling engineering has shortened sediment settling paths, weakened the vortex flow and reduced the capacity of material exchange. Additionally, coastal reclamation lead to decrease of the growth suitability index (GSI), thus it cut down the stability of phytoplankton species approximately 4-12%. The proposed GSI can be applied to the management of coastal reclamation for minimizing ecological impacts. It will be helpful for facilitating identifying suitable phytoplankton growth areas.

  11. Final technical evaluation report for the proposed revised reclamation plan for the Atlas Corporation Moab Mill

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This final Technical Evaluation Report (TER) summarizes the US Nuclear Regulatory Commission staff`s review of Atlas Corporation`s proposed reclamation plan for its uranium mill tailings pile near Moab, Utah. The proposed reclamation would allow Atlas to (1) reclaim the tailings pile for permanent disposal and long-term custodial care by a government agency in its current location on the Moab site, (2) prepare the site for closure, and (3) relinquish responsibility of the site after having its NRC license terminated. The NRC staff concludes that, subject to license conditions identified in the TER, the proposed reclamation plan meets the requirements identified in NRC regulations, which appear primarily in 10 CFR Part 40. 112 refs., 6 figs., 16 tabs.

  12. ECOLOGY-ECONOMICAL ASSESSMENT OF NEW RECLAMATION METHOD FOR CURRENTLY WORKING TECHNOGENIC MASSIFS

    Directory of Open Access Journals (Sweden)

    Alexey Strizhenok

    2017-01-01

    Full Text Available One of the most relevant problems of the mining industry is the need to reduce the negative impact of technogenic massifs formed by wastes of extraction and processing of mineral raw materials. This problem has a significant meaning for currently used massifs, because traditional ways of reclamation are not suitable for them. The article describes the results of a scientific study on the development of the most efficient reclamation method for currently used technogenic massifs. Described in detail the main results of the field observations, methods and equipment of laboratory experiments conducted to determine agro-chemical properties of the soil and optimal composition of binder agent. The article also provides ecological and economic assessment of the proposed method of reclamation. The study was conducted on the example of the real technogenic massif, formed by wastes of phosphorus ore processing.

  13. NASA Land Information System (LIS) Water Availability to Support Reclamation ET Estimation

    Science.gov (United States)

    Toll, David; Arsenault, Kristi; Pinheiro, Ana; Peters-Lidard, Christa; Houser, Paul; Kumar, Sujay; Engman, Ted; Nigro, Joe; Triggs, Jonathan

    2005-01-01

    The U.S. Bureau of Reclamation identified the remote sensing of evapotranspiration (ET) as an important water flux for study and designated a test site in the Lower Colorado River basin. A consortium of groups will work together with the goal to develop more accurate and cost effective techniques using the enhanced spatial and temporal coverage afforded by remote sensing. ET is a critical water loss flux where improved estimation should lead to better management of Reclamation responsibilities. There are several areas where NASA satellite and modeling data may be useful to meet Reclamation's objectives for improved ET estimation. In this paper we outline one possible contribution to use NASA's data integration capability of the Land Information System (LIS) to provide a merger of observational (in situ and satellite) with physical process models to provide estimates of ET and other water availability outputs (e.g., runoff, soil moisture) retrospectively, in near real-time, and also providing short-term predictions.

  14. Final technical evaluation report for the proposed revised reclamation plan for the Atlas Corporation Moab Mill

    International Nuclear Information System (INIS)

    1997-03-01

    This final Technical Evaluation Report (TER) summarizes the US Nuclear Regulatory Commission staff's review of Atlas Corporation's proposed reclamation plan for its uranium mill tailings pile near Moab, Utah. The proposed reclamation would allow Atlas to (1) reclaim the tailings pile for permanent disposal and long-term custodial care by a government agency in its current location on the Moab site, (2) prepare the site for closure, and (3) relinquish responsibility of the site after having its NRC license terminated. The NRC staff concludes that, subject to license conditions identified in the TER, the proposed reclamation plan meets the requirements identified in NRC regulations, which appear primarily in 10 CFR Part 40. 112 refs., 6 figs., 16 tabs

  15. Analysis of the traveltime sensitivity kernels for an acoustic transversely isotropic medium with a vertical axis of symmetry

    KAUST Repository

    Djebbi, Ramzi

    2016-02-05

    In anisotropic media, several parameters govern the propagation of the compressional waves. To correctly invert surface recorded seismic data in anisotropic media, a multi-parameter inversion is required. However, a tradeoff between parameters exists because several models can explain the same dataset. To understand these tradeoffs, diffraction/reflection and transmission-type sensitivity-kernels analyses are carried out. Such analyses can help us to choose the appropriate parameterization for inversion. In tomography, the sensitivity kernels represent the effect of a parameter along the wave path between a source and a receiver. At a given illumination angle, similarities between sensitivity kernels highlight the tradeoff between the parameters. To discuss the parameterization choice in the context of finite-frequency tomography, we compute the sensitivity kernels of the instantaneous traveltimes derived from the seismic data traces. We consider the transmission case with no encounter of an interface between a source and a receiver; with surface seismic data, this corresponds to a diving wave path. We also consider the diffraction/reflection case when the wave path is formed by two parts: one from the source to a sub-surface point and the other from the sub-surface point to the receiver. We illustrate the different parameter sensitivities for an acoustic transversely isotropic medium with a vertical axis of symmetry. The sensitivity kernels depend on the parameterization choice. By comparing different parameterizations, we explain why the parameterization with the normal moveout velocity, the anellipitic parameter η, and the δ parameter is attractive when we invert diving and reflected events recorded in an active surface seismic experiment. © 2016 European Association of Geoscientists & Engineers.

  16. Reclamation and reuse of LEU silicide fuel from manufacturing scrap

    International Nuclear Information System (INIS)

    Gale, G.R.; Pace, B.W.; Evans, R.S.

    2004-01-01

    In order to provide an understanding of the organization which is the sole supplier of United States plate type research and test reactor fuel and LEU core conversions, a brief description of the structure and history is presented. Babcock and Wilcox (B and W) is a part of McDermott International, Inc. which is a large diversified corporation employing over 20,000 people primarily in engineering and construction for the off-shore oil and power generation industries throughout the world. B and W provides many energy related products requiring precision machining and high quality systems. This is accomplished by using state-of-the-art equipment, technology and highly skilled people. The RTRFE group within B and W has the ability to produce various complexly shaped fuel elements with a wide variety of fuels and enrichments. B and W RTRFE has fabricated over 200,000 plates since 1981 and gained the diversified experience necessary to satisfy many customer requirements. This accomplishment was possible with the support of McDermott International and all of its resources. B and W has always had a commitment to high quality and integrity. This is apparent by the success and longevity (125 years) of the company. A lower cost to convert cores to LEU provides direct support to RERTR and demonstrates Babcock and Wilcox's commitment to the program. As a supporter of RERTR reactor conversion from HEU to LEU, B and W has contributed a significant amount of R and D money to improve the silicide fuel process which ultimately lowers the LEU core costs. In the most recent R and D project, B and W is constructing a LEU silicide reclamation facility to re-use the unirradiated fuel scrap generated from the production process. Remanufacturing use of this fuel completes the fuel cycle and provides a contribution to LEU cores by reducing scrap inventory and handling costs, lowering initial purchase of fuel due to increasing the process yields, and lowering the replacement costs. This

  17. Reclamation of coal mine spoil dump through integrated biotechnological approach

    International Nuclear Information System (INIS)

    Juwarkar, A.S.; Thawale, P.R.; Mowade, S.; Shrivastava, S.; Deshbhratar, P.B.; Juwarkar, A.

    1994-01-01

    Laboratory and field studies were carried out to restore the fertility and productivity of coal mine spoil using primary clarifier sludge from paper mill effluent treatment plant and use of specialised culture of biofertilizers and mycorrhizal fungi. Plants namely Tectona grandis, Delbergia sissoo, Gmelina arporea, Emblica officinalis and Cassia seamea were grown. Sludge amendment enhanced the survival rate of plants to 80% compared to 20% in unamended spoil. Plants grown on unamended spoil showed stunted growth. Growth of plants increased by 188-484% when sludge was applied at the rate of 100 tonnes per hectare. At 100 tones per hectare sludge amendment, biofertilizer and mycorrhizae treatment there were 83.7 nodules in shishum as against only 4.6 nodules in case of spoil alone. Further root length was 276% and 281% more respectively in case of shishum and teak. Inoculation of plant saplings with respective biofertilizers and mycorrhizae further increased the plant growth by 144-198%. At Durgapur coal mine, 56,000 saplings of Tectona grandis, Gmelina arporea, Delbergia sissoo, Emblica officinalis, Azadirachta indica, Acacia ariculiformis, Prosopis etc were successfully planted on spoil dump using integrated biotechnological approach. 10 refs., 5 tabs

  18. Implementation and Comparison of Acoustic Travel-Time Measurement Procedures for the Solar Dynamics Observatory-Helioseismic and Magnetic Imager Time-Distance Helioseismology Pipeline

    Science.gov (United States)

    Couvidat, S.; Zhao, J.; Birch, A. C.; Kosovichev, A. G.; Duvall, Thomas L., Jr.; Parchevsky, K.; Scherrer, P. H.

    2010-01-01

    The Helioseismic and Magnetic Imager (HMI) instrument onboard the Solar Dynamics Observatory (SDO) satellite is designed to produce high-resolution Doppler-velocity maps of oscillations at the solar surface with high temporal cadence. To take advantage of these high-quality oscillation data, a time - distance helioseismology pipeline (Zhao et al., Solar Phys. submitted, 2010) has been implemented at the Joint Science Operations Center (JSOC) at Stanford University. The aim of this pipeline is to generate maps of acoustic travel times from oscillations on the solar surface, and to infer subsurface 3D flow velocities and sound-speed perturbations. The wave travel times are measured from cross-covariances of the observed solar oscillation signals. For implementation into the pipeline we have investigated three different travel-time definitions developed in time - distance helioseismology: a Gabor-wavelet fitting (Kosovichev and Duvall, SCORE'96: Solar Convection and Oscillations and Their Relationship, ASSL, Dordrecht, 241, 1997), a minimization relative to a reference cross-covariance function (Gizon and Birch, Astrophys. J. 571, 966, 2002), and a linearized version of the minimization method (Gizon and Birch, Astrophys. J. 614, 472, 2004). Using Doppler-velocity data from the Michelson Doppler Imager (MDI) instrument onboard SOHO, we tested and compared these definitions for the mean and difference traveltime perturbations measured from reciprocal signals. Although all three procedures return similar travel times in a quiet-Sun region, the method of Gizon and Birch (Astrophys. J. 614, 472, 2004) gives travel times that are significantly different from the others in a magnetic (active) region. Thus, for the pipeline implementation we chose the procedures of Kosovichev and Duvall (SCORE'96: Solar Convection and Oscillations and Their Relationship, ASSL, Dordrecht, 241, 1997) and Gizon and Birch (Astrophys. J. 571, 966, 2002). We investigated the relationships among

  19. Implementation and Comparison of Acoustic Travel-Time Measurement Procedures for the Helioseismic and Magnetic Imager Time-Distance Helioseismology Pipeline

    Science.gov (United States)

    Couvidat, S.; Zhao, J.; Birch, A. C.; Kosovichev, A. G.; Duvall, T. L., Jr.; Parchevsky, K.; Scherrer, P. H.

    2009-01-01

    The Helioseismic and Magnetic Imager (HMI) instrument on board the Solar Dynamics Observatory (SDO) satellite is designed to produce high-resolution Doppler velocity maps of oscillations at the solar surface with high temporal cadence. To take advantage of these high-quality oscillation data, a time-distance helioseismology pipeline has been implemented at the Joint Science Operations Center (JSOC) at Stanford University. The aim of this pipeline is to generate maps of acoustic travel times from oscillations on the solar surface, and to infer subsurface 3D flow velocities and sound-speed perturbations. The wave travel times are measured from cross covariances of the observed solar oscillation signals. For implementation into the pipeline we have investigated three different travel-time definitions developed in time-distance helioseismology: a Gabor wavelet fitting (Kosovichev and Duvall, 1997), a minimization relative to a reference cross-covariance function (Gizon and Birch, 2002), and a linearized version of the minimization method (Gizon and Birch, 2004). Using Doppler velocity data from the Michelson Doppler Imager (MDI) instrument on board SOHO, we tested and compared these definitions for the mean and difference travel-time perturbations measured from reciprocal signals. Although all three procedures return similar travel times in a quiet Sun region, the method of Gizon and Birch (2004) gives travel times that are significantly different from the others in a magnetic (active) region. Thus, for the pipeline implementation we chose the procedures of Kosovichev and Duvall (1997) and Gizon and Birch (2002). We investigated the relationships among these three travel-time definitions, their sensitivities to fitting parameters, and estimated the random errors they produce

  20. Metal concentrations and mobility in marine sediment and groundwater in coastal reclamation areas: A case study in Shenzhen, China

    International Nuclear Information System (INIS)

    Chen Kouping; Jiao, Jiu J.

    2008-01-01

    The concentrations of metals in the buried marine sediment and groundwater were differently affected by land reclamation. Nine metals (V, Cr, Mn, Co, Ni, Cu, Zn, Cd and Pb) in sediment and coastal groundwater from reclamation areas in Shenzhen were examined. The gradually decreased concentrations (V, Cr, Mn, Ni, Cu, Zn) in sediment and relatively higher concentrations (V, Cr, Mn, Co, Ni, Cu and Cd) in groundwater within reclamation areas were observed. The increase of V, Cr, Mn, Ni, Cu and Cd concentrations in groundwater within reclamation areas subsequently after land reclamation should be resulted from the mobilization of these metals accumulated in the sediment. These metals appear to be easily mobilized from solid phase to solution phase after reclamation. The physico-chemical changes such as reduction in pH and salinity in water environment induced by land reclamation appear to be responsible for metal mobility in the sediment-groundwater system. - Metals in coastal groundwater and marine sediment are affected by land reclamation

  1. Jackpile-Paguate Uranium Mine Reclamation Project, Laguna Indian Reservation, Cibola County, New Mexico

    International Nuclear Information System (INIS)

    1986-10-01

    The final version of environmental impact statement, EPA No. 860443F, relates to a proposed reclamation plan for the Jackpile-Paguate uranium mine in New Mexico. The statement describes backfilling of disturbed areas, the reduction of waste dump slopes, steam stabilization, and revegetation plans. Positive impacts include the restoration of the site to productive land use, the reduction of hazards, and aesthetic improvements. Negative impacts include a one-time loss of water and assignment of labor. The Surface Mining Control and Reclamation Act of 1977 provides a legal mandate for the statement. The summary includes a reference to the draft statement

  2. Reclamation of oil and gas well sites on privately-owned land in Alberta: An evaluation of benefits and costs

    International Nuclear Information System (INIS)

    Bates, L.A.

    1994-01-01

    In Alberta, ca 24,000 oil/gas well sites will be abandoned over the next 10 years. There is concern that the expense to reclaim the surface lands at these sites to current standards represents a substantial opportunity cost to industry and the provincial economy. The economic costs and benefits associated with regulation of such reclamation activity are examined and the impacts of surface access regulations on the reclamation process are discussed. Cost benefit analysis is not easily applied to environmental regulation where some extra-market benefits and costs are intangible and/or unmeasurable. Although this qualifies the results, it appears that the costs of wellsite reclamation exceed the benefits. Costs are defined as reclamation expenses; benefits are defined as the real estate value of the land, or the net present value of agricultural land rentals. An effort has been made to provide a proxy for the extra-market value of the land to the landowner. The continuation of full surface access compensation for nonproducing wells can result in negative incentive effects that reduce allocative efficiency of reclamation regulation. Reclamation costs are correlated with well age and surface access payments, but not with agricultural land use or geographic region. This suggests that reclamation standards designed to reclaim well sites to the same productive capacity as site-adjacent land is not driving reclamation effort. Rather, landowners have negotiated substantial annual surface lease payments and may also be demanding greater reclamation effort, either to maximize compensation due to higher expectations. Methods of reducing these negative incentive effects to better achieve reclamation goals are suggested. 49 refs., 9 figs., 17 tabs

  3. Gas pressure reduction and regulation plants: Acoustic impact

    International Nuclear Information System (INIS)

    Ferrero, G.; Torello, P.

    1992-01-01

    The paper analyses the impacts of the Italian Decree of 1st March, 1991, regarding 'Maximum limits of sound exposition in premises and outside environment' on gas distribution companies. In particular it deals with how Italgas, concerning gas reduction and regulation plants, has done its best to meet some provisions of this decree. In particular, the following subjects are dealt with: intervention time, reclamation plans, measurements, destination classes of territory, estimates of environmental impact, etc. Finally, an example of a structural intervention for the reclamation of an existing plant is given

  4. Sorghum - An alternative energy crop for marginal lands and reclamation sites

    Science.gov (United States)

    Lukas, Stefan; Theiß, Markus; Jäkel, Kerstin

    2017-04-01

    The production of biogas and the associated cultivation of energy crops are still of great importance. Considering increasing restrictions for the cultivation of standard biogas crop maize regarding an environmentally friendly production of biomass, a wider range of energy crops is needed. The cultivation of sorghum can contribute to this. As maize, sorghum is a C4-plant and offers a high biomass yield potential. Originated in the semi-arid tropics, sorghum is well adapted to warm and dry climate and particularly noted for its drought tolerance compared to maize. It also makes few demands on soil quality and shows a good capability of nutrient acquisition. Therefore, particularly on marginal areas and reclamation sites with low soil nutrient and water content sorghum can contribute to secure crop yield and income of farmers. The applied research project aims at and reflects on the establishment of sorghum as a profitable and ecological friendly cropping alternative to maize, especially in the face of probable climate change with increasing risks for agriculture. For this purpose, site differentiated growing and cultivar trials with a standardized planting design as well as several practical on-farm field experiments were conducted. The agronomical and economic results will lead to scientifically based procedures and standards for agricultural practice with respect to cultivation methods (drilling, pest-management, fertilization), cropping sequence and technique, cropping period or position in crop rotation. Even by now there is a promising feedback from the agricultural practice linked with an increasing demand for information. Moreover, the specific cropping area is increasing continuously. Therefore, the leading signs for the establishment of sorghum as profitable alternative to maize biogas production are positive. Sorghum cultures perform best as main crops in the warm D locations in the middle and East German dry areas. Here, the contribution margin

  5. The effects of various land reclamation scenarios on the succession of soil Bacteria, Archaea, and fungi over the short and long term

    Directory of Open Access Journals (Sweden)

    Junjian eLi

    2016-03-01

    Full Text Available Ecological restoration of mining areas has mainly focused on the succession dynamics of vegetation and the fate of microbial communities remains poorly understood. We examined changes in soil characteristics and plant and microbial communities with increasing reclamation period in an open coal mine. Bacterial, archaeal and fungal communities were assessed by tag-encoded 454 pyrosequencing. At the phylum level, Proteobacteria, Crenarchaeota, and Ascomycota had the highest detected relative abundance within bacteria, archaea, and fungi, respectively. Partial regressions and canonical correspondence analysis demonstrated that vegetation played a major role in bacterial and archaeal diversity and assemblies, and soil characteristics, especially nitrogen, were important for fungal diversity and assemblies. Spearman rank correlation indicated that bacterial and archaeal communities showed synergistic succession with plants; whereas, fungal communities showed no such pattern. Overall, our data suggest that there are different drivers of bacterial, archaeal and fungal succession during secondary succession in a reclaimed open mine.

  6. Pilot-scale testing membrane bioreactor for wastewater reclamation in industrial laundry

    DEFF Research Database (Denmark)

    Andersen, Martin; Kristensen, Gert Holm; Brynjolf, M.

    2002-01-01

    A pilot-scale study of membrane bioreactor treatment for reclamation of wastewater from Berendsen Textile Service industrial laundry in Søborg, Denmark was carried out over a 4 month period. A satisfactory COD degradation was performed resulting in a low COD in the permeate (

  7. Selective bibliography of surface coal mining and reclamation literature. Volume 2. Interior Coal Province

    Energy Technology Data Exchange (ETDEWEB)

    Patricoski, M. L.; Daniels, L. K.; Sobek, A. A.

    1979-08-01

    This bibliography has been compiled for use by researchers, students, and other groups who need a reference source of published literature related to surface coal mining and reclamation in the Interior Coal Province. This bibliography contains more than 1300 references, including government reports, journal articles, symposium proceedings, industrial reports, workshop proceedings, theses, and bibliographies. A simple format was used to categorize citations.

  8. Different effect of mycorrhizal inoculation in direct and indirect reclamation of spoil banks

    Czech Academy of Sciences Publication Activity Database

    Rydlová, Jana; Püschel, David; Vosátka, Miroslav; Charvátová, K.

    2008-01-01

    Roč. 82, č. 1 (2008), s. 15-20 ISSN 1613-9216 R&D Projects: GA MŠk 1M0571 Institutional research plan: CEZ:AV0Z60050516 Keywords : arbuscular mycorrhizal fungi * inoculum * reclamation Subject RIV: EF - Botanics Impact factor: 0.482, year: 2008

  9. Prairie of mine(s) : cultural reclamation of the Estevan/Bienfait Coalfields

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, S.

    2010-07-01

    A cultural reclamation project was launched in the Bienfait region of southern Saskatchewan where lignite mining has been ongoing since the 1800s. Evidence of 5 surface mines, 2 power stations and thousands of acres of spoil piles remain at the abandoned site. The region also comprises 140 abandoned underground mines and 4 mined-out townsites. The project introduced cultural reclamation into the role of landscape architecture, specifically in the planning and design of reclaimed mining lands. At the present time, the reclamation of post-extractive sites is limited to focusing almost exclusively on ecological factors, but failing to recognize the people and the industrial processes that actively transformed the landscape can disengage people from their past. The project concludes with a proposed master plan in addition to a few site-specific interventions that interrogate and explore the role of experiential, cultural, and historical elements in the reclamation of a site. In doing so, awareness is created about the ways in which various landscapes are manipulated every day in order for people to live in greater comfort.

  10. Countermeasures for China’s Ecological Environment Construction in Land Reclamation

    Institute of Scientific and Technical Information of China (English)

    Chen; LI; Xinfeng; LIU; Zhe; PENG; Tao; SI; Lingfeng; KONG

    2013-01-01

    Basic situation of the current ecological environment construction in land consolidation and rehabilitation of China is introduced. The related advanced experience abroad is summarized from mainly four aspects, namely policy, system as well as subject development, planning guidance, design method of project planning and engineering study, and practical countermeasures to China’s ecological environment construction in land reclamation are proposed. In terms of policy, system and subject, relevant regulations, policies and system construction should be strengthened and the framework of policy, system and subject development in ecological landscape construction of China’s land reclamation should be proposed, integrating ecological environment construction into land reclamation. At the level of strategic planning, the spatial layout and construction key points of green infrastructure in land reclamation of "urban multi-functional developing region, eastern economic developed region, central modern agricultural region and northwestern ecological fragile region" should be achieved. At the level of project planning design, ecological principles, sustainable landscape design principles and vernacular landscape design methods are to be integrated into the planning procedure to form operable technique regulations or introductions. At the level of engineering design, engineering technique system, standards and regulations of ditches, roads, forests and channels with local distinctions should be formulated according to the characters and strategic demands of urbanization, industrialization, agriculture modernization and ecological environment preservation in different regions.

  11. 43 CFR 429.26 - When may Reclamation reduce or waive costs or fees?

    Science.gov (United States)

    2010-10-01

    ... Reductions or Waivers of Application Fees, Administrative Costs, and Use Fees § 429.26 When may Reclamation reduce or waive costs or fees? (a) As determined appropriate and approved and documented by the applicable Regional Director, the application fees may be waived, and charges for administrative costs or use...

  12. Cultural keystone species in oil sands reclamation, Fort McKay, Alberta, Canada

    Energy Technology Data Exchange (ETDEWEB)

    Garibaldi, A.; Straker, J. [Stantec Consulting Ltd., Surrey, BC (Canada)

    2009-12-15

    This presentation discussed a reclamation project conducted in Fort McKay, Alberta that was designed to address some of the social and cultural concerns related to oil sands mining in the region. Conventional reclamation practices in the region have demonstrated a lack of communication and participation from surrounding communities. The project was designed to address future land use plans and to include cultural values in the reclamation process. An integrative approach was used to address community landscapes issues and to explore methods of reclaiming the social and ecological components impacted by oil sands development. Traditional environmental knowledge was also incorporated into the program's design. Cultural keystone species (CKS) were used to provide a culturally relevant compass to guide people engaging in long-term reclamation and land use planning. Cultural keystone species were defined as salient species that significantly shape the cultural identity of a people. Keystone species in the region include the beaver; the moose; the ratroot; and cranberries and blueberries. Challenges to the program included the fact that the scale of oil sands disturbances are so immense that some community recommendations for reclaiming CKS may be impractical. tabs., figs.

  13. Changes in algal stable isotopes following nutrient and peat amendments in oil sands aquatic reclamation

    International Nuclear Information System (INIS)

    Farwell, A.; Chen, H.; Boutsivongskad, M.; Dixon, D.

    2010-01-01

    The processing of oil sands in Alberta generates large volumes of processed material that must be reclaimed. Processed water and solids (PW/S) contain higher levels of naturally occurring compounds such as naphthenic acids (NAs) and polycyclic aromatic compounds (PACs). Organic carbon and nitrogen are some of the constituents in PW/S that may provide nutrient sources for aquatic reclamation sites as they develop into viable ecosystems. This study was conducted to assess the modifying factors that may affect the stable carbon and nitrogen isotope values of primary production in oil sands aquatic reclamation. Both field-based microcosm studies and laboratory studies were used to evaluate the changes in the growth and stable isotope values of phytoplankton, periphyton and/or filamentous algae along gradients of dissolved organic carbon (DOC), dissolved inorganic carbon (DIC), nitrogen and phosphorus. Various types of reclamation substrates were used in the study, including various combinations of sand, mature fine tailings, peat and process water. Results showed different levels of growth depending on both the water and substrate type. Typically, periphyton from oil sands reclamation sites were more enriched in 15N than the reference site. Periphyton from one site known as the MP site was more enriched in 13C than periphyton from another site know as the Shallow Wetland South Ditch (SWSD). However, periphyton in the demonstration pond (DP) was more 13C depleted than the reference site. Findings from this study indicate that carbon isotopes are influenced by other factors, such as nutrients.

  14. Water Reuse Highlights: A Summary Volume of Wastewater Reclamation and Reuse Information.

    Science.gov (United States)

    American Water Works Association, Denver, CO. Research Foundation.

    This document reports the efforts of the AWWA Research Foundation to gather, prepare, and distribute current technical information in the wastewater reclamation and reuse field. The information reported has been abstracted from other Foundation publications and only attempts here to highlight the field. Categories discussed include research,…

  15. A flow balance approach to scenarios for water reclamation by Ania ...

    African Journals Online (AJOL)

    drinie

    ISSN 0378-4738 = Water SA Vol. 27 No. 1 January 2001 115. Available on website http://www.wrc.org.za. Comments on: A flow balance approach to scenarios for water reclamation by Ania MW Grobicki and B Cohen. I would like to offer a brief comment on the above paper, which appeared in Water SA 25 (4), October ...

  16. Reclamation of abandoned mined lands along th Upper Illinois Waterway using dredged material

    Energy Technology Data Exchange (ETDEWEB)

    Van Luik, A; Harrison, W

    1982-01-01

    Sediments were sampled and characterized from 28 actual or proposed maintenance-dredging locations in the Upper Illinois Waterway, that is, the Calumet-Sag Channel, the Des Plaines River downstream of its confluence with the Calumet-Sag Channel, and the Illinois River from the confluence of the Kankakee and Des Plaines rivers to Havana, Illinois. Sufficient data on chemical constituents and physical sediments were obtained to allow the classification of these sediments by currently applicable criteria of the Illinois Environmental Protection Agency for the identification of hazardous, persistent, and potentially hazardous wastes. By these criteria, the potential dredged materials studied were not hazardous, persistent, or potentially hazardous; they are a suitable topsoil/ reclamation medium. A study of problem abandoned surface-mined land sites (problem lands are defined as being acidic and/or sparsely vegetated) along the Illinois River showed that three sites were particularly well suited to the needs of the Corps of Engineers (COE) for a dredged material disposal/reclamation site. Thes sites were a pair of municipally owned sites in Morris, Illinois, and a small corporately owned site east of Ottawa, Illinois, and adjacent to the Illinois River. Other sites were also ranked as to suitability for COE involvement in their reclamation. Reclamation disposal was found to be an economically competitive alternative to near-source confined disposal for Upper Illinois Waterway dredged material.

  17. Nanoenhanced Materials for Reclamation of Mine Lands and Other Degraded Soils: A Review

    Directory of Open Access Journals (Sweden)

    Ruiqiang Liu

    2012-01-01

    Full Text Available Successful mine soil reclamation facilitates ecosystem recovery, minimizes adverse environmental impacts, creates additional lands for agricultural or forestry uses, and enhances the carbon (C sequestration. Nanoparticles with extremely high reactivity and deliverability can be applied as amendments to improve soil quality, mitigate soil contaminations, ensure safe land–application of the conventional amendment materials (e.g., manures and biosolids, and enhance soil erosion control. However, there is no report on using nanoenhanced materials for mine soil reclamation. Through reviewing the up-to-date research results on using environment-friendly nanoparticles for agricultural soil quality improvement and for contaminated soil remediation, this paper synthesizes that these nanomaterials with high potentials for mine soil reclamation include zeolites, zero-valent iron nanoparticles, iron oxide nanoparticles, phosphate-based nanoparticles, iron sulfide nanoparticles and C nanotubes. Transport of these particles in the environment and their possible ecotoxicological effects are also discussed. Additionally, this article proposes a practical and economical approach to applying nanotechnology for mine soil reclamation: adding small amounts of nanoparticles to the conventional soil amendment materials and then applying the mixtures for soil quality improvements. Hence the cost of using nanoparticles is reduced and the benefits of both nanoparticles and the conventional amendment materials are harnessed.

  18. Efficient Monte Carlo sampling of inverse problems using a neural network-based forward—applied to GPR crosshole traveltime inversion

    Science.gov (United States)

    Hansen, T. M.; Cordua, K. S.

    2017-12-01

    Probabilistically formulated inverse problems can be solved using Monte Carlo-based sampling methods. In principle, both advanced prior information, based on for example, complex geostatistical models and non-linear forward models can be considered using such methods. However, Monte Carlo methods may be associated with huge computational costs that, in practice, limit their application. This is not least due to the computational requirements related to solving the forward problem, where the physical forward response of some earth model has to be evaluated. Here, it is suggested to replace a numerical complex evaluation of the forward problem, with a trained neural network that can be evaluated very fast. This will introduce a modeling error that is quantified probabilistically such that it can be accounted for during inversion. This allows a very fast and efficient Monte Carlo sampling of the solution to an inverse problem. We demonstrate the methodology for first arrival traveltime inversion of crosshole ground penetrating radar data. An accurate forward model, based on 2-D full-waveform modeling followed by automatic traveltime picking, is replaced by a fast neural network. This provides a sampling algorithm three orders of magnitude faster than using the accurate and computationally expensive forward model, and also considerably faster and more accurate (i.e. with better resolution), than commonly used approximate forward models. The methodology has the potential to dramatically change the complexity of non-linear and non-Gaussian inverse problems that have to be solved using Monte Carlo sampling techniques.

  19. Can the Earth’s harmonic spectrum be derived directly from the stochastic inversion of global travel-time data?

    Directory of Open Access Journals (Sweden)

    Steve Della Mora

    2015-03-01

    Full Text Available A set of seismic observations which all sample the same structure in the same way should have zero variance. This is naturally the case if all sources are in the same place, and the data are recorded by the same station. If sources and/or receivers are not in the same place, but close to one another, variance will generally be nonzero, but small. Variance might become large if the sampled region of the Earth contains heterogeneities whose spatial wavelength is comparable to the distances between sources and between receivers (and thus between the corresponding ray paths. The travel-time variance of a “bundle” of seismic rays thus reflects the degree of complexity of the sampled region of the medium. We apply this simple principle to real seismic databases, attempting to constrain the spherical harmonic spectrum of Earth’s structure without having to derive a tomographic model. This results in a reduction of the dimensionality of the solution space, and hence of computational costs. This approach allows to constrain the statistical properties, rather than exact geographic locations of structural features; knowing the statistics of Earth’s structure is most valuable for many fundamental geodynamic questions. We follow an earlier study by Gudmundsson et al. [1990] to find an approximate analytical relationship between averaged variance and harmonic spectrum; this allows us to determine the latter from a measurement of the former via a linear least squares inversion. Our analysis shows that the variance of ray bundles associated with large geographic extent of source/receiver bins is sensitive to low-degree spectral power, and vice-versa for small bins/high harmonic degrees. The method is accordingly ineffective at very low harmonic degrees, associated with an inherently limited number of source-receiver bins. We conduct a suite of inversions of both real and synthetic seismic data sets to evaluate the resolving power of our algorithm, and

  20. Recuperação de área degradada por construção de hidroelétrica com adubação verde e corretivo Soil reclamation by green manure and soil ammendements in areas degraded by hydroelectric power plant construction

    Directory of Open Access Journals (Sweden)

    Marlene Cristina Alves

    2008-12-01

    Full Text Available As "áreas de empréstimo" em hidrelétricas são as áreas remanescentes da construção da fundação da barragem e podem ser consideradas áreas degradadas, pois delas foram retirados os horizontes superficiais do solo. Este trabalho teve como objetivo estudar a recuperação de um Latossolo Vermelho distrófico, degradado por construção civil (Usina Hidrelétrica de Ilha Solteira-SP, por meio de adubação verde e aplicação de calagem e gessagem. Os tratamentos constituíram-se de: testemunha (solo mobilizado e vegetação espontânea; mucuna-preta e guandu até 1994. Depois foram substituídos por feijão-de-porco; calcário + mucuna-preta; calcário + guandu até 1994. Nova substituição foi feita por feijão-de-porco; calcário + gesso + mucuna-preta e calcário + gesso + guandu até 1994. Outra substituição foi feita por feijão-de-porco. Esses tratamentos foram estabelecidos em blocos casualizados com quatro repetições: após quatro anos com os adubos verdes, um ano com milho, um ano com aveia-preta e dois anos com braquiária. Foram avaliados: pH, teores de Ca2+, Mg2+, P, K, capacidade de troca catiônica, saturação por bases e teor de matéria orgânica. Os tratamentos adotados estão recuperando os atributos químicos do solo degradado, e a mucuna-preta apresentou os melhores resultados, quando comparada ao guandu e feijão-de-porco. Os efeitos da recuperação dos atributos químicos do solo alcançaram a profundidade de 0,0-0,2 m. As técnicas adotadas para recuperação desses atributos químicos (adubação verde, calagem e gessagem no primeiro ano atingiram a profundidade do solo de 0,0-0,1 m e, somente após cinco anos, de 0,0-0,2 m.Loan areas near hydroelectric power plants can be considered degraded areas since they were stripped of their soil surface horizons. This study aimed to investigate the recovery of soil chemical attributes of a Red Latosol (Oxisol used in the embankment and fill of the hydroelectric

  1. A modelling framework for reclamation planning of oil sands mines in northern Alberta

    International Nuclear Information System (INIS)

    Shaw, R.D.; Hamilton, H.R.; MacKinnon, M.D.; Gulley, J.R.

    1995-01-01

    The Reclamation Landscape Model Development Project was initiated in 1991 to develop a modelling framework to assist in oil sands mine reclamation planning. The initial year focused on developing a suite of computer simulation models suitable for evaluating hydrodynamic, water quality and biological conditions of fine-tails bottom lakes that would be capped with a layer of fresh water. That modelling framework was further refined in 1992--93 by incorporating probabilistic capabilities, developing of secondary production and food-chain components, and implementing of a model to simulate contaminant concentrations in the Athabasca River. In 1993--94 the emphasis expanded from a focus solely on developing tools for evaluating wet landscape options to developing an integrated modelling framework capable of evaluating both wet and dry landscape reclamation options. Major components completed in 1993--94 included development of a dry landscape module that includes surface runoff, groundwater seepage, air vapor and bioaccumulation components, a wetlands module to assist in evaluating treatment potential and for optimizing design of wetlands units, and a risk analysis module for quantifying risks to human health and ecological receptors. The Reclamation Landscape Model is a compartment modelling system that consists of a number of stand-alone computer programs that can be run in conjunction with one another or separately. The computer programs that simulate contaminant-fate processes range from simple empirical models to complex, mechanistic, three-dimensional, dynamic models, which are capable of predicting contaminant concentrations in water, soil, air and biota for a wide range of reclamation landscape units. Most of the component models have probabilistic capabilities

  2. Reclamation of sodic soils in northern Tanzania, using locally ...

    African Journals Online (AJOL)

    SERVER

    2007-08-20

    Aug 20, 2007 ... gypsum significantly (p≤0.05) improved pH, electrical conductivity of the saturated paste (ECe), ... Owing to the problems of land shortage, some farmers in this area ... Longoi village in the east, Tanganyika Planting Company sugar estate in the south, .... was followed by FYM and gypsum supplied alone.

  3. Drivers, trends, and potential impacts of long-term coastal reclamation in China from 1985 to 2010

    Energy Technology Data Exchange (ETDEWEB)

    Tian, Bo; Wu, Wenting; Yang, Zhaoqing; Zhou, Yunxuan

    2016-03-01

    Driven by rapid economic development, population growth, and urbanization, China has experienced severe coastal land reclamation over the last decades, which resulted in significant loss of coastal wetland and wildlife habitat, and degradation of marine ecosystems. This study used advanced remote-sensing techniques to analyze the spatial and temporal distributions of coastal reclamation in China and investigated the relationships between coastal land reclamation and coastal economy, population growth, and urbanization. Analysis of long-term Landsat images time series from 1985 to 2010 in 5-year intervals, in combination with remotely sensed image techniques, indicated a sharp increasing trend of land reclamation after 2005, which accounted for over 35% of China’s total reclamation during the 25-year period since 1985. High-intensity coastal reclamation in China was mainly driven by the booming economy associated with urbanization and industrial development in the coastal region. Analysis indicated that coastal land reclamation is closely correlated with the GDP per capita in China. Study results of Landsat images showed that 754,697 ha of coastal wetlands have been reclaimed across all coastal provinces and metropolises from 1985 to 2010, at an annual rate of 5.9%. Coastal areas within the three major economic zones (Bohai Bay, Yangtze River Delta, and Pearl River Delta) were found to generally have higher reclamation rates. For example, the built-up area in Shanghai, which is located in the Yangtze River Delta, increased more than five times from 1985 to 2010. Approximately 35% of the reclamation occurred in Bohai Bay, in which the CRI between 2005 and 2010 was three times higher than the average CRI over the 25-year period.

  4. A new low-cost method of reclaiming mixed foundry waste sand based on wet-thermal composite reclamation

    OpenAIRE

    Fan Zitian; Liu Fuchu; Long Wei

    2014-01-01

    A lot of mixed clay-resin waste sand from large-scale iron foundries is discharged every day; so mixed waste sand reclamation in low cost and high quality has a great realistic significance. In the study to investigate the possibility of reusing two types of waste foundry sands, resin bonded sand and clay bonded sand which came from a Chinese casting factory, a new low-cost reclamation method of the mixed foundry waste sand based on the wet-thermal composite reclamation was proposed. The wast...

  5. Municipal water reclamation of industrial water use in Mexico

    International Nuclear Information System (INIS)

    Gamez, G.; Ramos, R.; Aerts, P.; Guzman, E.; Pachecho, J. c.

    2009-01-01

    This article describes how treated domestic wastewater in a Mexican desert area is reused by a local mining and metallurgical company for process water make-up. With increasing production of treated domestic wastewater, the company's water reuse facilities were continuously expanded over the last ten years. Today, four water reuse plants run with reverse osmosis membranes. With water being a limiting factor, they have enabled the scale-up of mining operations. (Author)

  6. GrayQbTM Single-Faced Version 2 (SF2) Hanford Plutonium Reclamation Facility (PRF) deployment report

    Energy Technology Data Exchange (ETDEWEB)

    Plummer, J. R. [Savannah River Site (SRS), Aiken, SC (United States); Immel, D. M. [Savannah River Site (SRS), Aiken, SC (United States); Serrato, M. G. [Savannah River Site (SRS), Aiken, SC (United States); Dalmaso, M. J. [Savannah River Site (SRS), Aiken, SC (United States); Shull, D. J. [Savannah River Site (SRS), Aiken, SC (United States)

    2015-11-18

    The Savannah River National Laboratory (SRNL) in partnership with CH2M Plateau Remediation Company (CHPRC) deployed the GrayQbTM SF2 radiation imaging device at the Hanford Plutonium Reclamation Facility (PRF) to assist in the radiological characterization of the canyon. The deployment goal was to locate radiological contamination hot spots in the PRF canyon, where pencil tanks were removed and decontamination/debris removal operations are on-going, to support the CHPRC facility decontamination and decommissioning (D&D) effort. The PRF canyon D&D effort supports completion of the CHPRC Plutonium Finishing Plant Decommissioning Project. The GrayQbTM SF2 (Single Faced Version 2) is a non-destructive examination device developed by SRNL to generate radiation contour maps showing source locations and relative radiological levels present in the area under examination. The Hanford PRF GrayQbTM Deployment was sponsored by CH2M Plateau Remediation Company (CHPRC) through the DOE Richland Operations Office, Inter-Entity Work Order (IEWO), DOE-RL IEWO- M0SR900210.

  7. Design, construction and performance of an experimental watershed to support a fen peatland for mine landscape reclamation

    Science.gov (United States)

    Price, J. S.; Petrone, R. M.; Strack, M.; Cooper, D. J.

    2017-12-01

    In the Alberta oil sands region, fen peatlands comprised 50% of the boreal landscape. Oil sands mining has stripped over 800 km2 of land surface to access bitumen, necessitating landscape reclamation to re-establish functional wetlands. Fens are peat-dominated wetlands that commonly rely on groundwater to supplement their water budget and deliver dissolved solutes that impart a distinct geochemistry, hence vegetation community. A numerical model was used to test the concept and guide selection of earth materials and system geometry. The goal was to maintain the placed peat in a sufficiently wet condition to support wetland plants and become a net carbon sink, in this sub-humid climate. The 32.1 ha Nikanotee Fen Watershed comprises a 7.7 ha upland, that was designed to recharge sufficient water, and deliver it to the 2.9 ha fen via groundwater flow. These features are surrounded by other reclaimed slopes designed to store water, rather than deliver it downslope. Four years of monitoring since construction show the fen maintains a high water table, and the peatland has become a strong carbon sink, even though the hydrological performance of construction materials varied substantially from what was anticipated (lower hydraulic conductivity). However, solutes associated with the tailings sand used in construction are moving towards the fen, and are expected to influence the future vegetation community and system biogeochemistry. One of the biggest uncertainties is the changing performance of soils and vegetation as they develop.

  8. The development of a field method for evaluating the success of reclamation efforts on abandoned mine lands

    International Nuclear Information System (INIS)

    Hunsberger, E.L.; Michaud, L.H.

    1994-01-01

    Abandoned Mine Lands (AML) are prevalent throughout Pennsylvania and in other areas of the US. Reclamation of these sites has been an ongoing concern of the Pennsylvania Department of Environmental Resources (PA DER) for over 20 yr. As the state of the technology improves, a variety of techniques have been utilized to rehabilitate AML. These reclamation efforts have resulted in vast improvements in the conditions of the sites, especially in water quality, erosion control, and aesthetic beauty. However, little work has been done to evaluate and document the success of individual reclamation techniques. Working with the Bureau of Abandoned Mine Reclamation, PA DER, a study was conducted at The Pennsylvania State University to address this need. The main goal of the project was to develop an evaluation system that could be easily carried out in the field by one person. The result of this study was the development of the Reclamation Success Evaluation System (RSES). The system utilizes three main parameters to evaluate reclamation success: (1) Surface Water Quality, (2) Extent of Erosion, and (3) Success of the Vegetative Cover. A series of guidelines and recommendations was developed for each of these evaluation parameters. The RSES was tested under field conditions by applying it to a watershed that contains both reclaimed and unreclaimed AML sites. This test proved that the RSES is an easily implemented and effective tool for evaluating the success of AML reclamation efforts. The system facilitates the comparison of reclamation efforts at different sites, it can be conducted by one person, and the results are easily interpreted

  9. Response of soil physicochemical properties and enzyme activities to long-term reclamation of coastal saline soil, Eastern China.

    Science.gov (United States)

    Xie, Xuefeng; Pu, Lijie; Wang, Qiqi; Zhu, Ming; Xu, Yan; Zhang, Meng

    2017-12-31

    Soil enzyme activity during different years of reclamation and land use patterns could indicate changes in soil quality. The objective of this research is to explore the dynamics of 5 soil enzyme activities (dehydrogenase, amylase, urease, acid phosphatase and alkaline phosphatase) involved in C, N, and P cycling and their responses to changes in soil physicochemical properties resulting from long-term reclamation of coastal saline soil. Soil samples from a total of 55 sites were collected from a coastal reclamation area with different years of reclamation (0, 7, 32, 40, 63a) in this study. The results showed that both long-term reclamation and land use patterns have significant effects on soil physicochemical properties and enzyme activities. Compared with the bare flat, soil water content, soil bulk density, pH and electrical conductivity showed a decreasing trend after reclamation, whereas soil organic carbon, total nitrogen and total phosphorus tended to increase. Dehydrogenase, amylase and acid phosphatase activities initially increased and then decreased with increasing years of reclamation, whereas urease and alkaline phosphatase activities were characterized by an increase-decrease-increase trend. Moreover, urease, acid phosphatase and alkaline phosphatase activities exhibited significant differences between coastal saline soil with 63years of reclamation and bare flat, whereas dehydrogenase and amylase activities remained unchanged. Aquaculture ponds showed higher soil water content, pH and EC but lower soil organic carbon, total nitrogen and total phosphorus than rapeseed, broad bean and wheat fields. Rapeseed, broad bean and wheat fields displayed higher urease and alkaline phosphatase activities and lower dehydrogenase, amylase and acid phosphatase activities compared with aquaculture ponds. Redundancy analysis revealed that the soil physicochemical properties explained 74.5% of the variation in soil enzyme activities and that an obvious relationship

  10. Investigation of Quality and Reclamation of Urban Storm Runoff in City of Shiraz

    Directory of Open Access Journals (Sweden)

    Mohammad Parvinnia

    2008-06-01

    Full Text Available Urban storm runoff is considered as a potentially reclaimable and valuable resource in many arid and semiarid areas, in Iran. Urban storm runoff in Shiraz is collected mainly by Khoshk River and transported to the Maharloo Lake without any treatment or reclamation. In this study, storm runoff quality and the possibility for its reclamation from different parts of the city in certain canals and pipes are investigated. The quality of the first flush in three relatively large and small suburban areas with different land uses is studied. For the purposes of this study, three stations were considered: one near the downstream end of the city on Khoshk River with a relatively large watershed, one in the middle of the city where street runoff is the main constituent of the flush, and a third one near the western outskirts of the city with relatively small mainly residential watershed.

  11. Object-Oriented Technology-Based Software Library for Operations of Water Reclamation Centers

    Science.gov (United States)

    Otani, Tetsuo; Shimada, Takehiro; Yoshida, Norio; Abe, Wataru

    SCADA systems in water reclamation centers have been constructed based on hardware and software that each manufacturer produced according to their design. Even though this approach used to be effective to realize real-time and reliable execution, it is an obstacle to cost reduction about system construction and maintenance. A promising solution to address the problem is to set specifications that can be used commonly. In terms of software, information model approach has been adopted in SCADA systems in other field, such as telecommunications and power systems. An information model is a piece of software specification that describes a physical or logical object to be monitored. In this paper, we propose information models for operations of water reclamation centers, which have not ever existed. In addition, we show the feasibility of the information model in terms of common use and processing performance.

  12. Application of toxicity testing in the evaluation of reclamation options for oil sands fine tails

    International Nuclear Information System (INIS)

    Nelson, L.R.; MacKinnon, M.; Gulley, J.R.

    1993-01-01

    The hot water process for the extraction of bitumen from oil sands leads to the production of large volumes of wastewater and the formation of a large inventory of fine clay tailings. This fine tailings material and its associated water are acutely toxic to various aquatic test organisms during bioassays. An overview is presented of toxicity testing at Syncrude and Suncor, the application of toxicity testing to fine tailings management, and the role in reclamation planning. The main acutely toxic component of the tailings is the polar organic acid fraction, specifically naphthanates. These naphthanates are readily degraded biologically by indigenous microbial populations. Toxicity testing is aimed at assessing the degree of both acute and chronic toxicity and the long term potential for the input of toxins into the environment from various proposed reclamation measures. 28 refs., 6 figs., 2 tabs

  13. Reclamation status of a degraded pasture based on soil health indicators.

    OpenAIRE

    SANTOS, C. A. dos; KRAWULSKI, C. C.; BINI, D.; GOULART FILHO, T.; KNOB, A.; MEDINA, C. C.; ANDRADE FILHO, G.; NOGUEIRA, M. A.

    2015-01-01

    Pasture degradation is a concern, especially in susceptible sandy soils for which strategies to recover them must be developed. Microbiological and biochemical soil health indicators are useful in the guindace of soil management practices and sustainable soil use. We assessed the success of threePanicum maximum Jacq. cultivars in the reclamation of a pasture in a sandy Typic Acrudox in the northwest of the state of Paraná, Brazil, based on soil health indicators. On a formerly degraded p...

  14. Reclamation status of a degraded pasture based on soil health indicators

    Directory of Open Access Journals (Sweden)

    Cristiane Alcantara dos Santos

    2015-06-01

    Full Text Available Pasture degradation is a concern, especially in susceptible sandy soils for which strategies to recover them must be developed. Microbiological and biochemical soil health indicators are useful in the guindace of soil management practices and sustainable soil use. We assessed the success of threePanicum maximum Jacq. cultivars in the reclamation of a pasture in a sandy Typic Acrudox in the northwest of the state of Paraná, Brazil, based on soil health indicators. On a formerly degraded pasture withUrochloa brizantha (Hochst. ex A. Rich. R.D. Webster, a trial with threeP. maximum (cv. Massai, Tanzânia, or Mombaça was conducted. Lime and phosphate were applied at set-up, and mineral N and K as topdressing. A remnant of degraded pasture adjacent to the trial was used as control. Twenty-three chemical, physical, microbiological and biochemical attributes were assessed for the 0-10 cm topsoil. The procedures for reclamation improved most of the indicators of soil health in relation to the degraded pasture, such as soil P, mineral N, microbial biomass C, ammonification rate, dehydrogenase activity and acid phosphatase. CO2 evolution decreased, whereas microbial biomass C increased in the pasture under reclamation, resulting in a lower metabolic quotient (qCO2 that points to a decrease in metabolic stress of the microbial community. The reclamation of the pasture withP. maximum, especially cv. Mombaça, were evidenced by improvements in the microbiological and biochemical soil health indicators, showing a recovery of processes related to C, N and P cycling in the soil.

  15. Travel-time Tomography of the Upper Mantle using Amphibious Array Seismic Data from the Cascadia Initiative and EarthScope

    Science.gov (United States)

    Cafferky, S.; Schmandt, B.

    2013-12-01

    Offshore and onshore broadband seismic data from the Cascadia Initiative and EarthScope provide a unique opportunity to image 3-D mantle structure continuously from a spreading ridge across a subduction zone and into continental back-arc provinces. Year one data from the Cascadia Initiative primarily covers the northern half of the Juan de Fuca plate and the Cascadia forearc and arc provinces. These new data are used in concert with previously collected onshore data for a travel-time tomography investigation of mantle structure. Measurement of relative teleseismic P travel times for land-based and ocean-bottom stations operating during year one was completed for 16 events using waveform cross-correlation, after bandpass filtering the data from 0.05 - 0.1 Hz with a second order Butterworth filter. Maps of travel-time delays show changing patterns with event azimuth suggesting that structural variations exist beneath the oceanic plate. The data from year one and prior onshore travel time measurements were used in a tomographic inversion for 3-D mantle P-velocity structure. Inversions conducted to date use ray paths determined by a 1-D velocity model. By meeting time we plan to present models using ray paths that are iteratively updated to account for 3-D structure. Additionally, we are testing the importance of corrections for sediment and crust thickness on imaging of mantle structure near the subduction zone. Low-velocities beneath the Juan de Fuca slab that were previously suggested by onshore data are further supported by our preliminary tomographic inversions using the amphibious array data.

  16. Landscape and bio- geochemical strategy for monitoring transformation and reclamation of the soil mining sites

    Science.gov (United States)

    Korobova, Elena

    2010-05-01

    Sites of active or abandoned mining represent areas of considerable technogenic impact and need scientifically ground organization of their monitoring and reclamation. The strategy of monitoring and reclamation depends on the scale and character of the physical, chemical and biological consequences of the disturbances. The geochemical studies for monitoring and rehabilitation of the career-dump complexes should methodically account of formation of the particular new landforms and the changes in circulation of the remobilized elements of the soil cover. However, the general strategy should account of both the initial and transformed landscape geochemical structure of the area with due regard to the natural and new content of chemical elements in the environmental components. For example the tailings and waste rocks present new geochemical fields with specifically different concentration of chemical elements that cause formation of new geochemical barriers and landscapes. The way of colonization of the newly formed landscapes depends upon the new geochemical features of the technogenic environment and the adaptive ability of local and intrusive flora. The newly formed biogeochemical anomalies need organization of permanent monitoring not only within the anomaly itself but also of its impact zones. Spatial landscape geochemical monitoring combined with bio-geochemical criteria of threshold concentrations seems to be a helpful tool for decision making on reclamation and operation of the soil mining sites to provide a long-term ecologically sustainable development of the impact zone as a whole.

  17. Application of dry stackable tailings technologies : providing the base for reclamation

    Energy Technology Data Exchange (ETDEWEB)

    Mikula, R.J. [Natural Resources Canada, Devon, AB (Canada). CANMET Energy Technology Centre

    2010-07-01

    The tailings containment structures are some of the largest man made features on the planet. This presentation demonstrated that dry stackable tailings technology may reduce the volume of the accumulated fluid fine tailings. Dry stackable tailings can contribute to boreal forest reclamation and reduce water requirement from the Athabasca River. Much of the water used for the production of each barrel of bitumen is recycled. The water is tied up in the pore spaces of the mineral sand, silt, and clay component which forms the mature fine tailings (MFT) that are contained behind large dykes. Syncrude and Suncor have used a wide variety of technologies to create a dry stackable tailings from this fluid fine tailings substrate. The availability of dry stackable tailings will open options for reclamation strategies that end with the original wetlands or boreal forest. Some of the tailings management options that would lead to a dry stackable tailings naturally also significantly decrease the barrels of water lost with each barrel of bitumen production. These options were discussed along with an analysis of their impact on recycle and pore water quality and quantity. There is an opportunity to remove residual bitumen during the transfer of fluid fine tailings to recover water and create dry stackable tailings. If this bitumen removal is extensive enough, it might be possible to use the dry stackable tailings directly as a reclamation material. tabs., figs.

  18. Grasshopper sparrow reproductive success and habitat use on reclaimed surface mines varies by age of reclamation

    Science.gov (United States)

    Wood, Petra; Ammer, Frank K.

    2015-01-01

    We studied 3 mountaintop mining–valley fill (MTMVF) complexes in southern West Virginia, USA to examine grasshopper sparrow (Ammodramus savannarum pratensis) demographic response to different age classes of mine land reclamation. For 71 nests monitored during the 2001–2002 breeding seasons, overall nest success (36%) was within the range of nest success rates previously reported for this species, but it was highest on more recently reclaimed sites (56%). Nest density and clutch size did not differ (P > 0.30) among reclamation age classes, whereas number of fledglings was greater (P = 0.01) on more recently reclaimed sites. We measured vegetation variables at 70 nest subplots and at 96 systematic subplots to compare nest vegetation with vegetation available on the plots. We found that nests occurred in areas with more bare ground near the nest, greater vegetation height–density surrounding the nest site, lower grass height, and fewer woody stems, similar to previous studies. As postreclamation age increased, vegetation height–density and maximum grass height increased, and sericea (Lespedeza cuneata) became more dominant. Nest success declined with increasing vegetation height–density at the nest. The grasslands available on these reclaimed mine complexes are of sufficient quality to support breeding populations of grasshopper sparrows, but nest success decreased on the older reclaimed areas. Without active management, grasslands on reclaimed MTMVF mines become less suitable for nesting grasshopper sparrows about 10 years after reclamation.

  19. Surface Mining and Reclamation Effects on Flood Response of Watersheds in the Central Appalachian Plateau Region

    Science.gov (United States)

    Ferrari, J. R.; Lookingbill, T. R.; McCormick, B.; Townsend, P. A.; Eshleman, K. N.

    2009-01-01

    Surface mining of coal and subsequent reclamation represent the dominant land use change in the central Appalachian Plateau (CAP) region of the United States. Hydrologic impacts of surface mining have been studied at the plot scale, but effects at broader scales have not been explored adequately. Broad-scale classification of reclaimed sites is difficult because standing vegetation makes them nearly indistinguishable from alternate land uses. We used a land cover data set that accurately maps surface mines for a 187-km2 watershed within the CAP. These land cover data, as well as plot-level data from within the watershed, are used with HSPF (Hydrologic Simulation Program-Fortran) to estimate changes in flood response as a function of increased mining. Results show that the rate at which flood magnitude increases due to increased mining is linear, with greater rates observed for less frequent return intervals. These findings indicate that mine reclamation leaves the landscape in a condition more similar to urban areas rather than does simple deforestation, and call into question the effectiveness of reclamation in terms of returning mined areas to the hydrological state that existed before mining.

  20. Biological reclamation of coal mine spoils without topsoil: an amendment study with domestic raw sewage and grass-legume mixture

    Energy Technology Data Exchange (ETDEWEB)

    Maiti, S.K.; Saxena, N.C. [Indian School of Mines, Dhanbad (India). Centre of Mining Environment

    1997-12-31

    A range of tree species were successfully established and grown on spoil site irrigated with domestic raw sewage in India. The heavy metals content in leaves, stem wood, stem bark root wood and root bark differ between species. In general, heavy metals like Fe, Zn, Mn, Cu, and Pb were accumulated more in Eucalyptus then Melia, however only Co accumulated maximum in Acacia. Increase trend was reported in respect of Na, K, Fe, Zn, Cu in grass and vegetables which were grown at a sewage fed farm. However, in all the cases micronutrients and heavy metals contents did not reach the critical limits to produce any phytotoxic effect. Irrigation with raw sewage had no adverse effect on chemical properties of spoil over the 3 year period. This study shows that raising vegetation on spoil material in mining areas irrigated with raw sewage is feasible. However, irrigation by raw sewage caused the accumulation of heavy metals in different plant parts. These plants are not of the fodder type and thus are not entering directly into ecological food chains, hence they can act as heavy metals sinks. On the basis of the Grass-legume experimental study, it may be concluded that N accumulation of coal mine spoil related with nature of spoil, prevailing climate and legume used. In a tropical climate N accumulation rate was found higher than in a temperate one. Addition of phosphorus fertilizer is essential for the reclamation of many mine spoils because even after three years available P level can remain deficient. Available K was found to be sufficient after three years.

  1. Bioremediation and reclamation of soil contaminated with petroleum oil hydrocarbons by exogenously seeded bacterial consortium: a pilot-scale study.

    Science.gov (United States)

    Mukherjee, Ashis K; Bordoloi, Naba K

    2011-03-01

    Spillage of petroleum hydrocarbons causes significant environmental pollution. Bioremediation is an effective process to remediate petroleum oil contaminant from the ecosystem. The aim of the present study was to reclaim a petroleum oil-contaminated soil which was unsuitable for the cultivation of crop plants by using petroleum oil hydrocarbon-degrading microbial consortium. Bacterial consortium consisting of Bacillus subtilis DM-04 and Pseudomonas aeruginosa M and NM strains were seeded to 20% (v/w) petroleum oil-contaminated soil, and bioremediation experiment was carried out for 180 days under laboratory condition. The kinetics of hydrocarbon degradation was analyzed using biochemical and gas chromatographic (GC) techniques. The ecotoxicity of the elutriates obtained from petroleum oil-contaminated soil before and post-treatment with microbial consortium was tested on germination and growth of Bengal gram (Cicer aretinum) and green gram (Phaseolus mungo) seeds. Bacterial consortium showed a significant reduction in total petroleum hydrocarbon level in contaminated soil (76% degradation) as compared to the control soil (3.6% degradation) 180 days post-inoculation. The GC analysis confirmed that bacterial consortium was more effective in degrading the alkane fraction compared to aromatic fraction of crude petroleum oil hydrocarbons in soil. The nitrogen, sulfur, and oxygen compounds fraction was least degraded. The reclaimed soil supported the germination and growth of crop plants (C. aretinum and P. mungo). In contrast, seeds could not be germinated in petroleum oil-contaminated soil. The present study reinforces the application of bacterial consortium rather than individual bacterium for the effective bioremediation and reclamation of soil contaminated with petroleum oil.

  2. Oil sands terrestrial habitat and risk modeling for disturbance and reclamation - Phase I report

    Energy Technology Data Exchange (ETDEWEB)

    Welham, C. [FORRx Consulting Inc., Belcarra, BC (Canada)

    2010-11-15

    The main purpose of this study is to build a framework that includes risk management and strategic decision-making to assess the impact of natural and industrial disturbance on ecosystem products and services and on the existence of habitat for terrestrial species in Alberta's Lower Athabasca planning region. This will include an evaluation of the impact of disturbance, conservation and reclamation activities associated with oil sands development both at the lease and regional levels. The basecase scenario, established in Phase I, includes a dendrochronology study of the link between climate and tree growth in the sub boreal region that comprises oil sands mining, an analysis of habitat availability for 10 wildlife species compared with reclamation activities on the Kearl Lake mine, and an examination of the potential for development of high levels of water stress in recent reclamation plantations at the Kearl Lake mine. Four tree species of the subboreal forests of Alberta and Saskatchewan were considered for the dendrochronology study: the white spruce or Picea glauca, the black spruce or Picea mariana, the jack pine or Pinus banksiana, and the trembling aspen or Populus tremuloides. This study shows that the water stress observed during the year has restricted the radial growth of white spruce and a link has been established between radial growth and increasing season precipitation and summer temperatures. The purposes of the habitat suitability analysis were to list habitats suitability models that could be applied to Alberta boreal forests, distinguish the parameters used in those models that can be simulated with an ecosystem simulation model, simulate the reclamation prescriptions detailed in the Kearl Lake EIA documents with the ecosystem simulation model and generate output suitable for populating each habitat suitability model. The establishment of ecologically viable reclamation plans in the oil sands region can be hard to manage regarding the

  3. Land reclamation and artificial islands: Walking the tightrope between development and conservation

    Directory of Open Access Journals (Sweden)

    Su Yin Chee

    2017-10-01

    Full Text Available Coastal developments worldwide have put entire shoreline ecosystems at risk. Recently, land reclamation has been extended to the construction of whole new islands; a phenomenon that is particularly common in Asia and the Middle East and is recognised as a global conservation issue. Using Penang Island, Malaysia as a case study, we illustrate the relationship between rapid population growth and the simultaneous increase in urbanisation, land reclamation and extent of artificial shorelines; and decrease in the quality and extent of natural coastal habitats. Our goal was to provide an up-to-date assessment of the state of coastal habitats around Penang, identify knowledge gaps and identify locations that may be potentially suitable for eco-engineering. Comparisons of historical and current topographic maps revealed that land formerly consisting of coastal swamp and forest, mangrove forests, sandy beaches, and rubber and oil plantations have been lost to large-scale land reclamation and urbanisation. Between 1960 and 2015, there were increases in urbanised area, reclaimed land, and artificial shoreline extent. The total extent of mangrove forests has remained relatively stable but this balance is characterised by significant losses on the east coast coupled with increases on the west coast. Coastal development on the island is still on-going with plans for the construction of five artificial islands and another two coastal reclamation projects are either underway or scheduled for the near future. If the plans for future land reclamations are fully realized, 32.3 km2 of the 321.8 km2 island (10% will be reclaimed land and the associated negative effects on the island’s natural coastal habitats will be inevitable. This study highlights sections of the coast of Penang Island in need of effective monitoring, conservation and management and explores the possibility of incorporating ecological engineering into development projects, either

  4. Use of morphometric soil aggregates parameters to evaluate the reclamation process in mined areas located at amazon forest - Brazil

    Science.gov (United States)

    Ribeiro, A. I.; Fengler, F. H.; Longo, R. M.; Mello, G. F.; Damame, D. B.; Crowley, D. E.

    2015-12-01

    Brazil has a high mineral potential that have been explored over the years. A large fraction of these mineral resources are located in Amazon region, which is known for its large biodiversity and world climate importance. As the policies that control the Amazon preservation are relatively new, several mining activities have been exploring the Amazon territory, promoting a large process of degradation. Once the mining activities have a high potential of environmental changes the government created polices to restrain the mining in Amazon forests and obligate mining companies to reclaim theirs minded areas. However, the measurement of reclamation development still is a challenging task for the Professionals involved. The volume and complexity of the variables, allied to the difficulty in identifying the reclamation of ecosystem functionalities are still lack to ensure the reclamation success. In this sense this work aims to investigate the representativeness of morphometric soil aggregates parameters in the understanding of reclamation development. The study area is located in the National Forest of Jamari, State of Rondônia. In the past mining companies explored the region producing eight closed mines that are now in reclamation process. The soil aggregates morphometric measurements: geometric mean diameter (GMD), aggregate circularity index, and aggregate roundness, were choose based in its obtaining facility, and their association to biological activity. To achieve the proposed objective the aggregates of eight sites in reclamation, from different closed mines, where chosen and compared to Amazon forest and open mine soil aggregates. The results were analyzed to one way ANOVA to identifying differences between areas in reclamation, natural ecosystem, and open mine. It was obtained differences for GMD and circularity index. However, only the circularity index allowed to identifying differences between the reclamation sites. The results allowed concluding: (1

  5. REKUL'TIVATSIYA NARUSHENNYKH ZEMEL' V UGOL'NOY PROMYSHLENNOSTI [RECLAMATION OF DISTURBED LANDS IN THE COAL INDUSTRY

    Directory of Open Access Journals (Sweden)

    Harionovskij A.A.

    2017-09-01

    Full Text Available The urgency of the issue of reclamation of disturbed lands is due to the fact that coal mining by both open and underground methods is inevitably accompanied by exclusion from economic circulation and violation of lands for various purposes, by changing the terrain and forming an industrial landscape. The article contains information on the volumes of disturbance and reclamation of lands in the coal industry In the article the directions of reclamation and applied technologies, domestic developments and foreign experience are considered. It was noted that the priority areas for reclamation of disturbed lands in the coal industry are: agricultural, forestry and sanitary-hygienic. It is noted that the quality of the recultivated areas is not always at the proper level, which creates dif culties in their subsequent use. The main reasons for the low quality of reclamation are the lack of the necessary amount of initial data on the composition and properties of soil and rock mass of the dumps at the development stage of the reclamation projects, the lack of special technical means for performing remediation works at a high level, the lack of a landscape approach to the restoration of disturbed areas. Measures to prevent spontaneous combustion of rock dumps are laid in projects and are not implemented in practice in full, which leads to the occurrence of res. Two new developments in the eld of reclamation are presented: the microbiological method developed by MNIIECO TEK JSC, and the method for restoring the biological productivity of disturbed lands, proposed by the Scienti c Research Institute of Agricultural Problems of Khakassia SB RAAS. Identi ed problem issues in the eld of reclamation and a list of measures to improve the state of protection of land resources. In the article it is shown that in order to improve the state in the sphere of land resources protection in the coal industry, it is necessary to improve the applied mining technologies

  6. Soil microbiology in land reclamation volume II - mycorrhizae

    Energy Technology Data Exchange (ETDEWEB)

    Graves, D.H. (ed.)

    1984-01-01

    This volume contains three separate reports: RRTAC 84-4 (Greenhouse pot studies dealing with amendment of oil sand tailings: effects of peat, sewage sludge and fertilizer on plant growth, mycorrhizae and microbial activity); RRTAC 84-8 (Vesicular-arbuscular mycorrhizal (VAM) development of slender wheatgrass on amended oil sand tailings and subalpine coal mines spoil); RRTAC 84-7 (Ectomycorrhizae in amended oil sand tailings and subalpine coal mine spoil and in undisturbed Jack pine and spruce stands). In the first report mixtures of two peats were used to amend oil sand tailings and either mineral fertilizers or sewage sludge were added at different rates. The growth of slender wheat grass and jack pine grown in the greenhouse in these media were monitored. In the second report the VAM development of slender wheatgrass was monitored over a 4 year period; in the third the mycorrhizal status of jack pine and bear berry grown in oil sand tailings treated with various amendments and of white spruce and willow grown in subalpine coal mine spoil were monitored over the same period.

  7. Trace element uptake by Eleocharis equisetina (spike rush) in an abandoned acid mine tailings pond, northeastern Australia: Implications for land and water reclamation in tropical regions

    International Nuclear Information System (INIS)

    Lottermoser, Bernd G.; Ashley, Paul M.

    2011-01-01

    This study was conducted to determine the uptake of trace elements by the emergent wetland plant species Eleocharis equisetina at the historic Jumna tin processing plant, tropical Australia. The perennial emergent sedge was found growing in acid waters (pH 2.45) and metal-rich tailings (SnAsCuPbZn). E. equisetina displayed a pronounced acid tolerance and tendency to exclude environmentally significant elements (Al, As, Cd, Ce, Co, Cu, Fe, La, Ni, Pb, Se, Th, U, Y, Zn) from its above-substrate biomass. This study demonstrates that geobotanical and biogeochemical examinations of wetland plants at abandoned mined lands of tropical areas can reveal pioneering, metal-excluding macrophytes. Such aquatic macrophytes are of potential use in the remediation of acid mine waters and sulfidic tailings and the reclamation of disturbed acid sulfate soils in subtropical and tropical regions. - Highlights: → In tropical Australia, Eleocharis equisetina grows in an acid mine tailings pond. → Eleocharis equisetina excludes environmentally significant elements from its biomass. → Inspections of equatorial mined lands can reveal metal-excluding aquatic macrophytes. → Such plants are of use in land and water remediation in tropical regions. - The metal-excluding aquatic macrophyte Eleocharis equisetina is of use in land and water remediation in tropical regions.

  8. Trace element uptake by Eleocharis equisetina (spike rush) in an abandoned acid mine tailings pond, northeastern Australia: Implications for land and water reclamation in tropical regions

    Energy Technology Data Exchange (ETDEWEB)

    Lottermoser, Bernd G., E-mail: Bernd.Lottermoser@utas.edu.au [School of Earth Sciences, University of Tasmania, Private Bag 79, Hobart, Tasmania 7001 (Australia); Ashley, Paul M. [Earth Sciences, University of New England, Armidale, New South Wales 2351 (Australia)

    2011-10-15

    This study was conducted to determine the uptake of trace elements by the emergent wetland plant species Eleocharis equisetina at the historic Jumna tin processing plant, tropical Australia. The perennial emergent sedge was found growing in acid waters (pH 2.45) and metal-rich tailings (SnAsCuPbZn). E. equisetina displayed a pronounced acid tolerance and tendency to exclude environmentally significant elements (Al, As, Cd, Ce, Co, Cu, Fe, La, Ni, Pb, Se, Th, U, Y, Zn) from its above-substrate biomass. This study demonstrates that geobotanical and biogeochemical examinations of wetland plants at abandoned mined lands of tropical areas can reveal pioneering, metal-excluding macrophytes. Such aquatic macrophytes are of potential use in the remediation of acid mine waters and sulfidic tailings and the reclamation of disturbed acid sulfate soils in subtropical and tropical regions. - Highlights: > In tropical Australia, Eleocharis equisetina grows in an acid mine tailings pond. > Eleocharis equisetina excludes environmentally significant elements from its biomass. > Inspections of equatorial mined lands can reveal metal-excluding aquatic macrophytes. > Such plants are of use in land and water remediation in tropical regions. - The metal-excluding aquatic macrophyte Eleocharis equisetina is of use in land and water remediation in tropical regions.

  9. Reclamation with a purpose. Proceedings of a joint conference of ASMR 19th annual national conference and IALR 6th international conference

    Energy Technology Data Exchange (ETDEWEB)

    Barnhisel, R.; Collins, M. (eds.) [American Society of Mining and Reclamation, Lexington, KY (United States)

    2002-07-01

    The conference covers the following topics: ecology; forestry and wildlife; geotechnical engineering; inter, tailing and reclamation; land use planning and design; soils and overburden and water management.

  10. Is travel-time to a specialist centre a risk factor for non-referral, non-attendance and loss to follow-up among patients with hepatitis C (HCV) infection?

    Science.gov (United States)

    Astell-Burt, Thomas; Flowerdew, Robin; Boyle, Paul; Dillon, John

    2012-07-01

    Little is known about why many people diagnosed with hepatitis C virus (HCV) infection fail to reach and stay within specialist care services. We used a Geographic Information System and logit regression to investigate whether travel-time to a specialist centre was associated with an increased likelihood of non-referral, non-attendance and loss to follow-up among persons diagnosed with HCV between 1991 and 2003 in Tayside, Scotland (UK). Information was available on referral to, and utilisation of, the single HCV specialist centre in Tayside between 1991 and 2006. Longer travel-time to a specialist centre was associated with an increased likelihood of non-referral to a specialist centre following diagnosis (Odds Ratio: 1.25, 95% Confidence Interval: 1.09, 1.44). Patients living further from an HCV specialist centre were less likely to be referred to it for treatment that could cure their HCV infection. Neither a history of intravenous drug use (IDU), nor area deprivation predicted non-referral. Subsequent to referral, travel-time to a specialist centre was not associated with either non-attendance (0.83 (0.56, 1.21)) or loss to follow-up (0.98 (0.78, 1.22)), although a history of IDU was a strong predictor of both non-attendance and loss to follow-up. Non-attendance was less likely among older patients, while loss to follow-up was more common among those living in deprived areas. Once referred, patients appear able to cope with stress and financial cost of long and frequent journeys to hospital. However, as rates of referral improve from more geographically remote areas, long travel-times to an HCV specialist centre may become an important factor determining future utilisation. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Environmental and biogeochemical changes following a decade's reclamation in the Dapeng (Tapong) Bay, southwestern Taiwan

    Science.gov (United States)

    Hung, J.-J.; Huang, W.-C.; Yu, C.-S.

    2013-09-01

    This study examines the environmental and biogeochemical changes in Dapeng (formerly spelled Tapong) Bay, a semi-enclosed coastal lagoon in southwestern Taiwan, after two major reclamation works performed between 1999 and 2010. The lagoon was largely occupied by oyster culture racks and fish farming cages before December, 2002. Substantial external inputs of nutrients and organic carbon and the fairly long water exchange time (τ) (10 ± 2 days) caused the lagoon to enter a eutrophic state, particularly at the inner lagoon, which directly received nutrient inputs. However, the entire lagoon showed autotrophic, and the estimated net ecosystem production (NEP) during the first stage was 5.8 mol C m-2 yr-1. After January, 2003, the aquaculture structures were completely removed, and the τ decreased to 6 ± 2 days. The annual mean concentrations of dissolved oxygen increased, and nutrients decreased substantially, likely due to improved water exchange, absence of feeding and increased biological utilization. The NEP increased 37% to 7.7 mol C m-2 yr-1 after structure removal. The second reclamation work beginning from July, 2006, focused on establishing artificial wetlands for wastewater treatment and on dredging bottom sediment. Although the τ did not change significantly (8 ± 3 days), substantial decreases in nutrient concentrations and dissolved organic matter continued. The NEP (14.3 mol C m-2 yr-1) increased 85% compared to that in the second stage. The data suggest that the reclamations substantially improved water quality, carbon and nutrient biogeochemical processes and budgets in this semi-enclosed ecosystem.

  12. Prevention of ground-water quality degradation during reclamation of a uraniferous lignite mine, North Dakota

    International Nuclear Information System (INIS)

    Houghton, R.L.; Anderson, G.S.; Hill, S.R.; Burgess, J.L.; Wald, J.D.; Patrick, D.P.; Hall, R.L.; Unseth, J.D.

    1987-01-01

    About 590,000 pounds of uranium oxide were recovered from 85,000 tons of lignite in at least 16 North Dakota pits between 1955 and 1967. Because uranium salts in the overburden generally were not recovered, spoil piles at abandoned mine sites contain elevated uranium contents. Reclamation of these mines is required to eliminate public hazards due to elevated radiation and toxic-element levels. A pilot reclamation project was implemented at one abandoned mine pit in northwestern Stark County. Basically, the reclamation involved the replacement of spoil material into the pits from which it was removed. Based on analyses of drill-hole cutting samples obtained from 2-foot depth increments on a 50-foot grid over the 7.25-acre spoil pile, spoil material with radium-226 concentrations exceeding 5 picocuries per gram above background or with uranium concentrations exceeding 5 times background was identified and mapped in three dimensions. This ''most-contaminated'' spoil material was selectively replaced in the mine pits above the water table to prevent dissolution of uranium salts and under a minimum of 5 feed of cover to minimize postreclamation surface-radiation levels. Similarly, areas of spoils with specific conductance greater than 5,000 microsiemens per centimeter were replaced at least 6 feet below the postreclamation ground surface to promote revegetation and above the water table to prevent enrichment of dissolved-solids concentrations in the aquifer. Finally, replaced zones of high radioactivity and soluble salts were capped with clay from the base of an adjacent pit; and the surface topography was mounded to minimize infiltration that might introduce radioactive and other soluble salts into the aquifer

  13. Effects of cluster land reclamation projects on storm surge in Jiaojiang Estuary, China

    Directory of Open Access Journals (Sweden)

    Zhi-lin Sun

    2017-01-01

    Full Text Available Variations in coastline geometry caused by coastal engineering affect tides, storm surges, and storm tides. Three cluster land reclamation projects have been planned for construction in the Jiaojiang Estuary during the period from 2011 to 2023. They will cause significant changes in coastline geometry. In this study, a surge-tide coupled model was established based on a three-dimensional finite-volume coastal ocean model (FVCOM. A series of numerical experiments were carried out to investigate the effects of variations in coastline geometry on tides, storm surges, and storm tides. This model was calibrated using data observed at the Haimen and Ruian gauge stations and then used to reproduce the tides, storm surges, and storm tides in the Jiaojiang Estuary caused by Typhoon Winnie in 1997. Results show that the high tide level, peak storm surge, and high storm tide level at the Haimen Gauge Station increased along with the completion of reclamation projects, and the maximum increments caused by the third project were 0.13 m, 0.50 m, and 0.43 m, respectively. The envelopes with maximum storm tide levels of 7.0 m and 8.0 m inside the river mouth appeared to move seaward, with the latter shifting 1.8 km, 3.3 km, and 4.4 km due to the first project, second project, and third project, respectively. The results achieved in this study contribute to reducing the effects of, and preventing storm disasters after the land reclamation in the Jiaojiang Estuary.

  14. Reclamation of a lignite combustion waste disposal site with alders (Alnus sp.): assessment of tree growth and nutrient status within 10 years of the experiment.

    Science.gov (United States)

    Pietrzykowski, Marcin; Woś, Bartłomiej; Pająk, Marek; Wanic, Tomasz; Krzaklewski, Wojciech; Chodak, Marcin

    2018-06-01

    Combustion wastes are characterised by extremely low N contents. Therefore, introduction of nitrogen-fixing species at the first stage of their biological reclamation is required. This paper presents an assessment of the growth parameters of alders (Alnus sp.) 10 years after their introduction to a disposal site of lignite combustion waste in Central Poland. Black (Alnus glutinosa) and grey alders (Alnus incana) were planted directly in the combustion waste. The soil amendment included three variants: control with pure combustion waste, admixture of lignite culm and addition of acid sand. Both alder species displayed good growth parameters comparable to those of alders in natural habitats. However, black alder had better growth parameters, such as stand density index (SDI), diameter at breast height (DBH) and height (H) than grey alder. The lignite amendment exerted a positive effect on tree growth, reflected in a higher SDI and H, whereas the acid sand amendment did not affect any of the growth parameters of the studied alder species. Despite the good growth parameters, the measured N:P and N:K ratios in the alder leaves largely differed from the optimal values indicating insufficient P and K supply at the combustion waste disposal site. This may pose a threat to further development of the introduced tree plantings. The introduction of alders along with the lignite addition into the planting holes seems to be a successful method of combustion waste revegetation.

  15. Succession of Bacterial Community Structure and Diversity in Soil along a Chronosequence of Reclamation and Re-Vegetation on Coal Mine Spoils in China

    Science.gov (United States)

    Li, Yuanyuan; Wen, Hongyu; Chen, Longqian; Yin, Tingting

    2014-01-01

    The growing concern about the effectiveness of reclamation strategies has motivated the evaluation of soil properties following reclamation. Recovery of belowground microbial community is important for reclamation success, however, the response of soil bacterial communities to reclamation has not been well understood. In this study, PCR-based 454 pyrosequencing was applied to compare bacterial communities in undisturbed soils with those in reclaimed soils using chronosequences ranging in time following reclamation from 1 to 20 year. Bacteria from the Proteobacteria, Chloroflexi, Actinobacteria, Acidobacteria, Planctomycetes and Bacteroidetes were abundant in all soils, while the composition of predominant phyla differed greatly across all sites. Long-term reclamation strongly affected microbial community structure and diversity. Initial effects of reclamation resulted in significant declines in bacterial diversity indices in younger reclaimed sites (1, 8-year-old) compared to the undisturbed site. However, bacterial diversity indices tended to be higher in older reclaimed sites (15, 20-year-old) as recovery time increased, and were more similar to predisturbance levels nearly 20 years after reclamation. Bacterial communities are highly responsive to soil physicochemical properties (pH, soil organic matter, Total N and P), in terms of both their diversity and community composition. Our results suggest that the response of soil microorganisms to reclamation is likely governed by soil characteristics and, indirectly, by the effects of vegetation restoration. Mixture sowing of gramineae and leguminosae herbage largely promoted soil geochemical conditions and bacterial diversity that recovered to those of undisturbed soil, representing an adequate solution for soil remediation and sustainable utilization for agriculture. These results confirm the positive impacts of reclamation and vegetation restoration on soil microbial diversity and suggest that the most important

  16. Modeling the impacts of dryland agricultural reclamation on groundwater resources in Northern Egypt using sparse data

    Science.gov (United States)

    Switzman, Harris; Coulibaly, Paulin; Adeel, Zafar

    2015-01-01

    Demand for freshwater in many dryland environments is exerting negative impacts on the quality and availability of groundwater resources, particularly in areas where demand is high due to irrigation or industrial water requirements to support dryland agricultural reclamation. Often however, information available to diagnose the drivers of groundwater degradation and assess management options through modeling is sparse, particularly in low and middle-income countries. This study presents an approach for generating transient groundwater model inputs to assess the long-term impacts of dryland agricultural land reclamation on groundwater resources in a highly data-sparse context. The approach was applied to the area of Wadi El Natrun in Northern Egypt, where dryland reclamation and the associated water use has been aggressive since the 1960s. Statistical distributions of water use information were constructed from a variety of sparse field and literature estimates and then combined with remote sensing data in spatio-temporal infilling model to produce the groundwater model inputs of well-pumping and surface recharge. An ensemble of groundwater model inputs were generated and used in a 3D groundwater flow (MODFLOW) of Wadi El Natrun's multi-layer aquifer system to analyze trends in water levels and water budgets over time. Validation of results against monitoring records, and model performance statistics demonstrated that despite the extremely sparse data, the approach used in this study was capable of simulating the cumulative impacts of agricultural land reclamation reasonably well. The uncertainty associated with the groundwater model itself was greater than that associated with the ensemble of well-pumping and surface recharge estimates. Water budget analysis of the groundwater model output revealed that groundwater recharge has not changed significantly over time, while pumping has. As a result of these trends, groundwater was estimated to be in a deficit of

  17. Reclamation Strategies and Geomorphic Outcomes in Coal Surface Mines of Eastern Ohio

    Science.gov (United States)

    Pollock, M.; Jaeger, K. L.

    2014-12-01

    Coal surface mining is a significant landscape disturbance in the United States. Since 1977, the reclamation of mined lands has been regulated by the Surface Mine Control and Reclamation Act (SMCRA). Prior to the act, many coalfields were left un-reclaimed or partially reclaimed, with highly irregular topology and drainage networks. Under the act, the reverse is often true; adherence to SMCRA often leads to the homogenization of surfaces and channel networks. While both pre and post-SMCRA landscapes are highly altered, they exhibit strongly dissimilar characteristics. We examine pre-SMCRA, post-SMCRA and unmined watersheds at 3 spatial scales in order to compare the geomorphic differences between reclamation strategies. In particular, we attempt to separate anthropogenic factors from pre-existing, natural factors via comparisons to unmined watersheds. Our study design incorporates a 3 scale top-down analysis of 21 independent watersheds (7 of each treatment type). Each watershed has an area of approximately 1km2. All watersheds share similar geography, climate and geology. At the landscape scale, characteristics are derived from 0.762m (2.5ft) resolution Digital Elevation Models (DEMs). At the channel network scale, DEMs, as well as remote sensing data (including the National Wetlands Inventory database) are used. Finally, the reach scale incorporates longitudinal and cross-section surveys (using a total station) as well as a particle size distribution. At each scale, attributes are parameterized for statistical comparison. Post-SMCRA sites are characterized by a general reduction of watershed surface slopes (11.9% median) compared to pre-SMCRA (19.3%) and unmined (19.8%) sites. Both pre and post-SMCRA channel networks are characterized by significant surface impoundments (in the form of remnant headwall trenches on pre-SMCRA sites and engineered retention basins on post-SMCRA sites). Pre-SMCRA outlet reaches have significantly steeper bed slopes (2.79% mean) than

  18. Initial land reclamation procedures related to possible Pu-cleanup activities at the Tonopah Test Range

    International Nuclear Information System (INIS)

    Wallace, A.; Romney, E.M.

    1976-02-01

    If areas of the Tonopah Test Range (TTR) are to be used for experimental tests of procedures for clean-up of 239 Pu contamination, there are experiences in the Great Basin Desert portions of the Nevada Test Site (NTS) which can serve as guides to reclamation and revegetation of such arid lands. Procedures which will encourage development of the grasses Hilaria jamesii and Oryzopsis hymenoides, as well as the perennial shrubs Eurotia lanata and Atriplex canescens would greatly improve the area as range land

  19. Reclamation and reuse of MWI slags under the aspect of ground water protection

    International Nuclear Information System (INIS)

    Lahl, U.; Struth, R.

    1993-01-01

    Some importants aspects of ground water protection are discussed, with regard to MWI-slag reclamation and reuse as construction material. The effects of a treatment process on residual organic compounds of slag material have to be regarded as very positive. Directed chemical influencing of the hydratation process directly after incineration offers new perspectives for generating slag with potentially little and constant elution behaviour. The authors welcome the new, sharpened demands on reuse of MWI-slag in Northrhine-Westfalia. This challenge can be met by the proposed treatment procedure without problems. (orig.) [de

  20. tomo3d: a new 3-D joint refraction and reflection travel-time tomography code for active-source seismic data

    Science.gov (United States)

    Meléndez, A.; Korenaga, J.; Sallares, V.; Ranero, C. R.

    2012-12-01

    We present the development state of tomo3d, a code for three-dimensional refraction and reflection travel-time tomography of wide-angle seismic data based on the previous two-dimensional version of the code, tomo2d. The core of both forward and inverse problems is inherited from the 2-D version. The ray tracing is performed by a hybrid method combining the graph and bending methods. The graph method finds an ordered array of discrete model nodes, which satisfies Fermat's principle, that is, whose corresponding travel time is a global minimum within the space of discrete nodal connections. The bending method is then applied to produce a more accurate ray path by using the nodes as support points for an interpolation with beta-splines. Travel time tomography is formulated as an iterative linearized inversion, and each step is solved using an LSQR algorithm. In order to avoid the singularity of the sensitivity kernel and to reduce the instability of inversion, regularization parameters are introduced in the inversion in the form of smoothing and damping constraints. Velocity models are built as 3-D meshes, and velocity values at intermediate locations are obtained by trilinear interpolation within the corresponding pseudo-cubic cell. Meshes are sheared to account for topographic relief. A floating reflector is represented by a 2-D grid, and depths at intermediate locations are calculated by bilinear interpolation within the corresponding square cell. The trade-off between the resolution of the final model and the associated computational cost is controlled by the relation between the selected forward star for the graph method (i.e. the number of nodes that each node considers as its neighbors) and the refinement of the velocity mesh. Including reflected phases is advantageous because it provides a better coverage and allows us to define the geometry of those geological interfaces with velocity contrasts sharp enough to be observed on record sections. The code also

  1. Report and recommendations of the task force on tree and shrub planting on active oil sands tailings dams

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-02-15

    In oil sands reclamation operations in Canada there is a conflict between dam safety and the planting of trees and woody shrubs. Indeed, tree planting is being restricted on the downstream slopes of dams to avoid damage to drains and to ensure the integrity of visual and instrumentation monitoring conflicting thus with progressive reclamation. Alberta Environment hired the Oil Sands Research and Information Network (OSRIN), an independent organization which analyzes and interprets available knowledge on soil and water reclamation in the oil sands mining sector, to address this issue and make recommendations. The organization appointed a Task Force which presented its final report in March 2011. The Task Force recommended that the Engineer of Record should be responsible for determining the tree and shrub planting zones and that he should submit his plans to Alberta Environment for approval.

  2. Assessment of vegetation establishment on tailings dam at an iron ore mining site of suburban Beijing, China, 7 years after reclamation with contrasting site treatment methods.

    Science.gov (United States)

    Yan, Demin; Zhao, Fangying; Sun, Osbert Jianxin

    2013-09-01

    Strip-mining operations greatly disturb soil, vegetation and landscape elements, causing many ecological and environmental problems. Establishment of vegetation is a critical step in achieving the goal of ecosystem restoration in mining areas. At the Shouyun Iron Ore Mine in suburban Beijing, China, we investigated selective vegetation and soil traits on a tailings dam 7 years after site treatments with three contrasting approaches: (1) soil covering (designated as SC), (2) application of a straw mat, known as "vegetation carpet", which contains prescribed plant seed mix and water retaining agent (designated as VC), on top of sand piles, and (3) combination of soil covering and application of vegetation carpet (designated as SC+VC). We found that after 7 years of reclamation, the SC+VC site had twice the number of plant species and greater biomass than the SC and VC sites, and that the VC site had a comparable plant abundance with the SC+VC site but much less biodiversity and plant coverage. The VC site did not differ with the SC site in the vegetation traits, albeit low soil fertility. It is suggested that application of vegetation carpet can be an alternative to introduction of topsoil for treatment of tailings dam with fine-structured substrate of ore sands. However, combination of topsoil treatment and application of vegetation carpet greatly increases vegetation coverage and plant biodiversity, and is therefore a much better approach for assisting vegetation establishment on the tailings dam of strip-mining operations. While application of vegetation carpet helps to stabilize the loose surface of fine-structured mine wastes and to introduce seed bank, introduction of fertile soil is necessary for supplying nutrients to plant growth in the efforts of ecosystem restoration of mining areas.

  3. Effect of mining and land reclamation on the radiological characteristics of the terrestrial environment of Florida's phosphate regions

    International Nuclear Information System (INIS)

    Roessler, C.E.; Kautz, R.; Bolch, W.E. Jr.; Wethington, J.A. Jr.

    1980-01-01

    Studies were performed to evaluate the extent and nature of the redistribution of uranium-series radioactivity in phosphate mining, reclamation, and land development. Radium-226 was measured in waste materials that enter into land reclamation. Radium-226 surface soil concentrations and depth profile, soil surface radon flux, and gamma radiation above the surface were reported for unmined and mined, reclaimed, and otherwise altered lands. Mining, land reclamation, and construction site preparation can increase the near-surface soil radium and related characteristics. The impact was evaluated in terms of effect on actual and potential indoor radon progeny concentrations in structures. It was concluded that debris lands, resulting from a former mining practice, represent the greatest impact on existing structures

  4. U.S. Department of Energy Office of Legacy Management Legacy Uranium Mine Site Reclamation - Lessons Learned - 12384

    Energy Technology Data Exchange (ETDEWEB)

    Kilpatrick, Laura E. [U.S. Department of Energy Office of Legacy Management, Westminster, Colorado 80021 (United States); Cotter, Ed [S.M. Stoller Corporation, Grand Junction, Colorado 81503 (United States)

    2012-07-01

    The U.S. Department of Energy (DOE) Office of Legacy Management is responsible for administering the DOE Uranium Leasing Program (ULP) and its 31 uranium lease tracts located in the Uravan Mineral Belt of southwestern Colorado (see Figure 1). In addition to administering the ULP for the last six decades, DOE has also undertaken the significant task of reclaiming a large number of abandoned uranium (legacy) mine sites and associated features located throughout the Uravan Mineral Belt. In 1995, DOE initiated a 3-year reconnaissance program to locate and delineate (through extensive on-the-ground mapping) the legacy mine sites and associated features contained within the historically defined boundaries of its uranium lease tracts. During that same time frame, DOE recognized the lack of regulations pertaining to the reclamation of legacy mine sites and contacted the U.S. Bureau of Land Management (BLM) concerning the reclamation of legacy mine sites. In November 1995, The BLM Colorado State Office formally issued the United States Department of the Interior, Colorado Bureau of Land Management, Closure/Reclamation Guidelines, Abandoned Uranium Mine Sites as a supplement to its Solid Minerals Reclamation Handbook (H-3042-1). Over the next five-and-one-half years, DOE reclaimed the 161 legacy mine sites that had been identified on DOE withdrawn lands. By the late 1990's, the various BLM field offices in southwestern Colorado began to recognize DOE's experience and expertise in reclaiming legacy mine sites. During the ensuing 8 years, BLM funded DOE (through a series of task orders) to perform reclamation activities at 182 BLM mine sites. To date, DOE has reclaimed 372 separate and distinct legacy mine sites. During this process, DOE has learned many lessons and is willing to share those lessons with others in the reclamation industry because there are still many legacy mine sites not yet reclaimed. DOE currently administers 31 lease tracts (11,017 ha) that

  5. Reclamation of landfills and dumps of municipal solid waste in a energy efficient waste management system: methodology and practice

    Science.gov (United States)

    Orlova, Tatyana; Melnichuk, Aleksandr; Klimenko, Kseniya; Vitvitskaya, Valentina; Popovych, Valentina; Dunaieva, Ielizaveta; Terleev, Vitaly; Nikonorov, Aleksandr; Togo, Issa; Volkova, Yulia; Mirschel, Wilfried; Garmanov, Vitaly

    2017-10-01

    The article considers the methodological and practical aspects of reclamation of landfills and dumps of municipal solid waste in a waste management system. The general tendencies of system development in the context of elements of the international concept of waste hierarchy are analyzed. Statistics of the formation and burial of domestic waste indicate a strategic non-alternative to the rejection of landfill technologies in favor of environmentally, energy efficient and economically expedient ways of utilization of municipal waste as a world trend. Practical approaches to the study of territories on which there are dumps and landfills are considered to justify the design solutions for reclamation.

  6. A flux-enhancing forward osmosis-nanofiltration integrated treatment system for the tannery wastewater reclamation.

    Science.gov (United States)

    Pal, Parimal; Chakrabortty, Sankha; Nayak, Jayato; Senapati, Suman

    2017-06-01

    Effective treatment of tannery wastewater prior to discharge to the environment as per environmental regulations remains a big challenge despite efforts to bring down the concentrations of the pollutants which are often quite high as measured in terms of chemical oxygen demand (7800 mg/L), total dissolved solids (5400 mg/L), chloride (4260 mg/L), sulphides (250 mg/L) and chromium. A pilot-scale forward osmosis and nanofiltration integrated closed loop system was developed for continuous reclamation of clean water from tannery wastewater at a rate of 52-55 L/m 2 /h at 1.6 bar pressure. The low-cost draw solution was 0.8 M NaCl solution. Continuous recovery for recycling the draw solute was done by nanofiltration of diluted draw solution at an operating pressure of 12 bar and volumetric cross-flow rate of 700 L/h. Fouling study revealed that the specific flat-sheet design of cross-flow forward osmosis module with counter current flow of feed and draw solution prevents the build-up of concentration polarization, thus enabling long-term filtration in continuous mode of operation without significant membrane fouling. This study culminates in the development of a compact, efficient and low-cost industrial wastewater treatment and reclamation technology.

  7. New reclamation standards for oil and gas well sites and pipelines in the agricultural land reserve

    International Nuclear Information System (INIS)

    Jones, P.

    1995-01-01

    Reclamation standards are a necessity because of increasing density of oil and gas developments, and the number of wells which may be abandoned over the next few years. All petroleum industry users of land are subject to the Agricultural Land Commission Act and require the approval of the Commission. The new General Order 293/95 was discussed, the purpose of which is to streamline existing regulations and to clarify reclamation standards. The new standards are similar to requirements currently in place in northwestern Alberta because landforms, soils, and land there are similar to those that exist in the Peace River region of B.C. Adopting similar requirements also has the added benefit of providing consistency for the industry between adjacent jurisdictions. In essence, the official view is that petroleum developments are temporary activities as long as the land is restored to its original or better condition, and the disruption to farm operations is minimal. Major provisions of General Order 293/95 were reviewed. It was noted that site contamination and the disposal of wastes were not addressed in the General Order. The reason for this is that these matters fall under the jurisdiction of other government agencies. 7 refs

  8. Monitoring ecosystem reclamation recovery using optical remote sensing: Comparison with field measurements and eddy covariance.

    Science.gov (United States)

    Chasmer, L; Baker, T; Carey, S K; Straker, J; Strilesky, S; Petrone, R

    2018-06-12

    Time series remote sensing vegetation indices derived from SPOT 5 data are compared with vegetation structure and eddy covariance flux data at 15 dry to wet reclamation and reference sites within the Oil Sands region of Alberta, Canada. This comprehensive analysis examines the linkages between indicators of ecosystem function and change trajectories observed both at the plot level and within pixels. Using SPOT imagery, we find that higher spatial resolution datasets (e.g. 10 m) improves the relationship between vegetation indices and structural measurements compared with interpolated (lower resolution) pixels. The simple ratio (SR) vegetation index performs best when compared with stem density-based indicators (R 2  = 0.65; p  0.02). Fluxes (net ecosystem production (NEP) and gross ecosystem production (GEP)) are most related to NDVI and SAVI when these are interpolated to larger 20 m × 20 m pixels (R 2  = 0.44-0.50; p  3 m 2  m -2 , making this index more appropriate for newly regenerating reclamation areas. For sites with LAI remote sensing in combination with field and eddy covariance data for monitoring and scaling of reclaimed and reference site productivity within and beyond the Oil Sands Region of western Canada. Copyright © 2018 Elsevier B.V. All rights reserved.

  9. Utilization of coal ash/coal combustion products for mine reclamation

    International Nuclear Information System (INIS)

    Dolence, R.C.; Giovannitti, E.

    1997-01-01

    Society's demand for an inexpensive fuel, combined with ignorance of the long term impacts, has left numerous scars on the Pennsylvania landscape. There are over 250,000 acres of abandoned surface mines with dangerous highwalls and water filled pits. About 2,400 miles of streams do not meet water quality standards because of drainage from abandoned mines. There are uncounted households without an adequate water supply due to past mining practices. Mine fires and mine subsidence plague many Pennsylvania communities. The estimated cost to reclaim these past scars is over $15 billion. The beneficial use of coal ash in Pennsylvania for mine reclamation and mine drainage pollution abatement projects increased during the past ten years. The increase is primarily due to procedural and regulatory changes by the Department of Environmental Protection (DEP). Prior to 1986, DEP required a mining permit and a separate waste disposal permit for the use of coal ash in backfilling and reclaiming a surface mine site. In order to eliminate the dual permitting requirements and promote mine reclamation, procedural changes now allow a single permit which authorize both mining and the use of coal ash in reclaiming active and abandoned pits. The actual ash placement, however, must be conducted in accordance with the technical specifications in the solid waste regulations

  10. Space Station Environmental Control and Life Support Systems: An Update on Waste Water Reclamation

    Science.gov (United States)

    Ferner, Kathleen M.

    1994-01-01

    Since the mid-1980's, work has been ongoing In the development of the various environmental control and life support systems (ECLSS) for the space station. Part of this effort has been focused on the development of a new subsystem to reclaim waste water that had not been previously required for shuttle missions. Because of the extended manned missions proposed, reclamation of waste water becomes imperative to avoid the weight penalties associated with resupplying a crew's entire water needs for consumption and daily hygiene. Hamilton Standard, under contract to Boeing Aerospace and Electronics, has been designing the water reclamation system for space station use. Since June of 1991, Hamilton Standard has developed a combined water processor capable of reclaiming potable quality water from waste hygiene water, used laundry water, processed urine, Shuttle fuel cell water, humidity condensate and other minor waste water sources. The system was assembled and then tested with over 27,700 pounds of 'real' waste water. During the 1700 hours of system operation required to process this waste water, potable quality water meeting NASA and Boeing specifications was produced. This paper gives a schematic overview of the system, describes the test conditions and test results and outlines the next steps for system development.

  11. Reclamation of devastated landscape in the Karviná region (Czech Republic

    Directory of Open Access Journals (Sweden)

    Havrlant Jan

    2014-12-01

    Full Text Available The article deals with the recent positive changes in the industrial landscape of the Karviná region in a broader context. The Karviná region has been the most important part of the coal-bearing Ostrava-Karviná District. Since the industrial revolution, the position of the primary mining area has brought a dynamic economic development and a great concentration of population into the fast-growing conurbation cities, particularly between 1950s and 1980s. However, the dominant coal mining and processing has had a negative impact on the environment, the character and utilization of the landscape. Many environmental, socioeconomic and other problems did not become fully evident until the social changes at the turn of 1980s and 1990s. At present, a great attention is being paid to the reclamation of the affected landscape. As a result, the region is starting to change its unflattering image of an industrial and problematic area devastated by coal extraction for the better after many years. The various forms of land reclamation, modification of water bodies, construction of new sports and recreational facilities and so on are bringing a gradual improvement of the environment in the region, creating a new cultivated landscape that can be used, among other things, for various forms of tourism and relaxation.

  12. Reclamation of natural, seminatural and agricultural environments following radioactive contamination - A Nordic study

    International Nuclear Information System (INIS)

    Liland, A.; Strand, P.; Skuterud, L.

    2002-01-01

    A range of methods, from simple cost benefits analyses to sophisticated decision making systems, are available for assessing the net countermeasure benefits to man contamination of different environments. As part of the Nordic Nuclear Safety Research Programme, an attempt was made to develop a strategy for mid- and long-term reclamation of contaminated cultivated agricultural environments, animals, forests, freshwater and fish, and urban environments. The study focused on the long-lived nuclides 137 Cs and 90 Sr. Also social implications and a sound environmental management should be addressed in the selection of a countermeasure strategy. The considerations of the cultivated agricultural environment included a model of a Nordic environment, with different soil types, land use and crops. When considering countermeasure strategies for animals, both transfer and production rates have to be compared, as the transfer of radiocaesium to animals in cultivated areas is low compared to the transfer in unimproved areas or to wild animals. The countermeasures considered for freshwater were: use of alternative water supply, and ion exchange method, and for freshwater fish: limiting consumption, brining in households, and wet land and lake liming. In urban environments knowledge on the source strengths, relative dose rate at different locations (indoor, outdoor) due to the deposition on different urban surfaces (roofs, walls, paved areas, trees, bushes etc.) is important. For all environments costs and averted doses were estimated for a fallout scenario giving 1 MBq m -2 of 137 Cs. The effectiveness of the different countermeasures was then compared and reclamation strategies suggested. (author)

  13. Forward prediction of tunnel face by use of equi-traveltime planes; Tosojimen no riyo ni yoru tunnel kiriha zenpo tansa

    Energy Technology Data Exchange (ETDEWEB)

    Ashida, Y [Kyoto University, Kyoto (Japan). Faculty of Engineering; Hirano, T [Nishimatsu Construction Co. Ltd., Tokyo (Japan)

    1996-05-01

    The result is reported herein of a depth transform algorithm application utilizing equi-traveltime planes in reflection seismic exploration for the purpose of knowing the structure configuration in front of the tunnel face in a tunnel excavation process. A vibration producing hole was provided 0.5m above the ground surface while a vibration receiving hole was provided at 1.5m above the ground surface, and the excavated lengths were 1.5m and 0.5m, respectively. There were 24 recording channels, from which inline offset records were taken. The on-site records were subjected to 100-1000Hz band pass filtering. The elastic wave propagation rate in the rock used for depth conversion was set at 400m/s in consideration of the distance and direct wave travel time from the vibration source to the vibration receiving point. As the result of study, weak layers were found in the neighborhood of 230-240m, 260-270m, and 280-290m. This method requires less core memory for calculation and completes calculation in a shorter period of time, which enables a conclusion that it will be effective in grasping the 3-dimensional structure in front of the tunnel face in the working scene. 4 refs., 7 figs.

  14. An efficient sequential strategy for realizing cross-gradient joint inversion: method and its application to 2-D cross borehole seismic traveltime and DC resistivity tomography

    Science.gov (United States)

    Gao, Ji; Zhang, Haijiang

    2018-05-01

    Cross-gradient joint inversion that enforces structural similarity between different models has been widely utilized in jointly inverting different geophysical data types. However, it is a challenge to combine different geophysical inversion systems with the cross-gradient structural constraint into one joint inversion system because they may differ greatly in the model representation, forward modelling and inversion algorithm. Here we propose a new joint inversion strategy that can avoid this issue. Different models are separately inverted using the existing inversion packages and model structure similarity is only enforced through cross-gradient minimization between two models after each iteration. Although the data fitting and structural similarity enforcing processes are decoupled, our proposed strategy is still able to choose appropriate models to balance the trade-off between geophysical data fitting and structural similarity. This is realized by using model perturbations from separate data inversions to constrain the cross-gradient minimization process. We have tested this new strategy on 2-D cross borehole synthetic seismic traveltime and DC resistivity data sets. Compared to separate geophysical inversions, our proposed joint inversion strategy fits the separate data sets at comparable levels while at the same time resulting in a higher structural similarity between the velocity and resistivity models.

  15. Boron reclamation

    International Nuclear Information System (INIS)

    Smith, R.M.

    1980-07-01

    A process to recover high purity 10 B enriched crystalline boron powder from a polymeric matrix was developed on a laboratory basis and ultimately scaled up to production capacity. The process is based on controlled pyrolysis of boron-filled scrap followed by an acid leach and dry sieving operation to return the powder to the required purity and particle size specifications. Typically, the recovery rate of the crystalline powder is in excess of 98.5 percent, and some of the remaining boron is recovered in the form of boric acid. The minimum purity requirement of the recovered product is 98.6 percent total boron

  16. Rubber Reclamation

    Science.gov (United States)

    Williams, Kathryn R.

    2007-01-01

    The safety and health hazards related to recycling of used rubber, due to the scarcity and high price of virgin rubber are reported. Various threats like stagnant water pools trapped in tires leading to diseases and ignited tires, which become very difficult to extinguish and generating smoke that is extremely detrimental to the environment, have…

  17. Independent regulatory control and monitoring of the environment at the uranium legacy sites under reclamation

    International Nuclear Information System (INIS)

    Shandala, N.K.; Titov, A.V.; Kiselev, S.M.; Isaev, D.V.; Aladova, R.A.

    2012-01-01

    Full text: Radiation safety at areas affected by the natural uranium mining and milling facilities is very important for the environment protection and human health. For this purpose the close operator-regulator contact is required during remedial operations. One of the key mechanisms of the operating regulatory supervision of radiation safety at uranium legacy sites is organization of independent radiation control and monitoring in the course of reclamation and after its completion. The main stages of this strategy include: detailed radiation survey at the area and in the vicinity of the former uranium mining sites; threat assessment in order to identify the regulatory priorities; environmental radiation control and monitoring. Tailings and shallow disposal sites of the uranium mining wastes are the most critical areas in terms of potential hazard for the environment. Tailings are the source of contamination of the near-land air due to the radionuclide dust resuspension from the tailing surface; surface and ground water due to washing out from by precipitation and surface streams of toxic and radioactive elements. Frequently, contamination of surface and ground waters results in some problems, especially when using the leaching fluids for the solution mining and draining hydraulic fluids. Radiation risk for the residents of areas near not operating uranium mining and milling facilities depends on the following factors: radon exhalation from the surface of dumps and tailing; radioactive dust transfer; using radioactive material in building; contamination of surface water streams and aquifers used for drinking water supply; contamination of open ponds used for fish breeding and catching; contamination of foodstuffs grown in the nuclear legacy areas. Radiation monitoring is necessary for the up-to-date response to changing radiation situation during reclamation and arrangement of adequate countermeasures. We mean here comprehensive dynamic surveillance including long

  18. On-site verification trials using fly ash for reclamation behind bulkheads; Sekitanbai wo gogan uraumezai ni riyosuru genba jissho chosa

    Energy Technology Data Exchange (ETDEWEB)

    Kozawa, K [Center for Coal Utilization, Japan, Tokyo (Japan); Yoshida, T [Toyo Construction Co. Ltd., Tokyo (Japan); Miyagawa, H; Kobayashi, M

    1996-09-01

    As a method to utilize coal ash generated from coal burning power plants more effectively in bulk, its use has been studied as a reclamation material behind bulkhead structures in harbors and airports. Verification trials for the study results were performed at the Hekinan power plant of the Chubu Electric Power Company. The trials included the following: an experiment to verify horizontal soil pressure and active earth pressure when slurry made of fly ash added with cement and seawater was placed in frameworks installed behind bulkheads of a harbor, a slurry hardening test, environmental impact investigation, and constructibility investigation. As a result, a large number of findings were obtained, including the following matters: earth pressure of slurry which has been placed in a soil tank in about ten minutes would be measured as pressure of liquid, but it shifts to behavior as a soil in a relatively short time; the earth pressure after three hours agreed with static earth pressure calculated under provision of K{sub o} = 0.2; and a hardened body made with cement under a certain mixing ratio was obtained, which stands by itself at a height of 7.5 m at compression strength of 1.77 kgf/cm {sup 2}. 11 figs., 2 tabs.

  19. Selective bibliography of surface coal mining and reclamation literature. Volume 1. Eastern coal province. [More than 1300 references

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, N. E.; Sobek, A. A.; Streib, D. L.

    1977-11-01

    This bibliography has been compiled for use by researchers, students, and other groups who need a reference source of published literature related to surface coal mining and reclamation in the Eastern Coal Province. This bibliography contains more than 1300 references including government reports, journal articles, symposium proceedings, industrial reports, workshop proceedings, theses, and bibliographices. A simple format was used to categorize citations.

  20. 30 CFR 886.27 - What special procedures apply to Indian lands not subject to an approved Tribal reclamation program?

    Science.gov (United States)

    2010-07-01

    ... OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR ABANDONED MINE LAND... mitigate emergency situations or extreme danger situations arising from past mining practices and begin... Indian tribe and the Bureau of Indian Affairs office having jurisdiction over the Indian lands. (d) If a...