Realizing block planning concepts in make-and-pack production using MILP modelling and SAP APO
Günther, H.O.; Grunow, M.; Neuhaus, U.
2006-01-01
of a major producer of hair dyes as a case study. We present two different implementations of the block planning concept. One utilizes the Production Planning/Detailed Scheduling module of the SAP APO© software. The other approach is based on a mixed-integer linear programming formulation. In contrast...
Hardware realization of chaos based block cipher for image encryption
Barakat, Mohamed L.
2011-12-01
Unlike stream ciphers, block ciphers are very essential for parallel processing applications. In this paper, the first hardware realization of chaotic-based block cipher is proposed for image encryption applications. The proposed system is tested for known cryptanalysis attacks and for different block sizes. When implemented on Virtex-IV, system performance showed high throughput and utilized small area. Passing successfully in all tests, our system proved to be secure with all block sizes. © 2011 IEEE.
吴俊; 胡协和; 陈生; 褚健
2003-01-01
The closed-loop stability issue of finite-precision realizations was investigated for digital controllers implemented in block-floating-point format. The controller coefficient perturbation was analyzed resulting from using finite word length (FWL) block-floating-point representation scheme. A block-floating-point FWL closed-loop stability measure was derived which considers both the dynamic range and precision. To facilitate the design of optimal finite-precision controller realizations, a computationally tractable block-floating-point FWL closed-loop stability measure was then introduced and the method of computing the value of this measure for a given controller realization was developed. The optimal controller realization is defined as the solution that maximizes the corresponding measure, and a numerical optimization approach was adopted to solve the resulting optimal realization problem. A numerical example was used to illustrate the design procedure and to compare the optimal controller realization with the initial realization.
吴俊; 胡协和; 陈生; 褚健
2003-01-01
The closed-loop stability issue of finite-precision realizations was investigated for digital control-lers implemented in block-floating-point format. The controller coefficient perturbation was analyzed resultingfrom using finite word length (FWL) block-floating-point representation scheme. A block-floating-point FWL closed-loop stability measure was derived which considers both the dynamic range and precision. To facilitate the design of optimal finite-precision controller realizations, a computationally tractable block-floating-point FWL closed-loop stability measure was then introduced and the method of computing the value of this measure for a given controller realization was developed. The optimal controller realization is defined as the solution that maximizes the corresponding measure, and a numerical optimization approach was adopted to solve the resulting optimal realization problem. A numerical example was used to illustrate the design procedure and to compare the optimal controller realization with the initial realization.
Realization Techniques of Virtual Assembly Process Planning System
LIU Jian-hua; NING Ru-xin; TANG Cheng-tong
2005-01-01
The key realization techniques of virtual assembly process planning (VAPP) system are analyzed,including virtual assembly model, real-time collision detection, automatic constraint recognition algorithm, cable harness assembly process planning and visual assembly process plan at the workshop. A virtual assembly model based on hierarchical assembly task list (HATL) is put forward, in which assembly tasks are defined to express component assembling operations and are sequentially and hierarchically organized according to different subassemblies, which can perfectly model the construction process of product. And a multi-layer automatic geometry constraint recognition algorithm of how to identify assembly constraint relations in the virtual environment is proposed, then a four-layer collision detection algorithm is discussed. A VAPP system is built and some simple mechanical assemblies are used to illustrate the feasibility of the proposed method and algorithms.
Simplifying Physical Realization of Gaussian Particle Filters with Block-Level Pipeline Control
Miodrag Bolić
2005-03-01
Full Text Available We present an efficient physical realization method of particle filters for real-time tracking applications. The methodology is based on block-level pipelining where data transfer between processing blocks is effectively controlled by autonomous distributed controllers. Block-level pipelining maintains inherent operational concurrency within the algorithm for high-throughput execution. The proposed use of controllers, via parameters reconfiguration, greatly simplifies the overall controller structure, and alleviates potential speed bottlenecks that may arise due to complexity of the controller. A Gaussian particle filter for bearings-only tracking problem is realized based on the presented methodology. For demonstration, individual coarse grain processing blocks comprising particle filters are synthesized using commercial FPGA. From the execution characteristics obtained from the implementation, the overall controller structure is derived according to the methodology and its temporal correctness verified using Verilog and SystemC.
Realized gains from block-plot coastal Douglas-fir trials in the northern Oregon Cascades
Terrence Z. Ye; Keith J.S. Jayawickrama; J. Bradley. St. Clair
2010-01-01
Realized gains for coastal Douglas-fir (Pseudotsuga menziesii var. menziesii) were evaluated using data collected from 15-year-old trees from five field trials planted in large block plots in the northern Oregon Cascades. Three populations with different genetic levels (elite--high predicted gain; intermediate--moderate predicted gain; and an...
SU-E-T-279: Realization of Three-Dimensional Conformal Dose Planning in Prostate Brachytherapy
Li, Z; Jiang, S; Yang, Z [Tianjin University, Tianjin (China); Bai, H; Zhang, X [Seeds biological Pharmacy Ltd, Tianjin (China)
2014-06-01
Purpose: Successful clinical treatment in prostate brachytherapy is largely dependent on the effectiveness of pre-surgery dose planning. Conventional dose planning method could hardly arrive at a satisfy result. In this abstract, a three-dimensional conformal localized dose planning method is put forward to ensure the accuracy and effectiveness of pre-implantation dose planning. Methods: Using Monte Carlo method, the pre-calculated 3-D dose map for single source is obtained. As for multiple seeds dose distribution, the maps are combined linearly to acquire the 3-D distribution. The 3-D dose distribution is exhibited in the form of isodose surface together with reconstructed 3-D organs group real-timely. Then it is possible to observe the dose exposure to target volume and normal tissues intuitively, thus achieving maximum dose irradiation to treatment target and minimum healthy tissues damage. In addition, the exfoliation display of different isodose surfaces can be realized applying multi-values contour extraction algorithm based on voxels. The needles could be displayed in the system by tracking the position of the implanted seeds in real time to conduct block research in optimizing insertion trajectory. Results: This study extends dose planning from two-dimensional to three-dimensional, realizing the three-dimensional conformal irradiation, which could eliminate the limitations of 2-D images and two-dimensional dose planning. A software platform is developed using VC++ and Visualization Toolkit (VTK) to perform dose planning. The 3-D model reconstruction time is within three seconds (on a Intel Core i5 PC). Block research could be conducted to avoid inaccurate insertion into sensitive organs or internal obstructions. Experiments on eight prostate cancer cases prove that this study could make the dose planning results more reasonable. Conclusion: The three-dimensional conformal dose planning method could improve the rationality of dose planning by safely reducing
Block Island National Wildlife Refuge: Comprehensive Conservation Plan
US Fish and Wildlife Service, Department of the Interior — This Comprehensive Conservation Plan (CCP) was written to guide management on Block Island NWR for the next 15 years. This plan outlines the Refuge vision and...
A review on salt lake city, Kolkata, India: Master planning and realization
Tošković Dobrivoje
2008-01-01
Full Text Available Motivation for construction of Salt Lake City comes from the circumstances characterizing life in Calcutta known by its social, political and cultural activities. Among many problems, the City was faced with poverty and overcrowding. West Bengal Government realized that serious steps have to be taken to resolve the situation. One of the biggest actions of the Government was creation of so called 'NEDECO' Plan for reclamation certain area of the Salted Lakes, followed by the tender for urban planning. The enterprise for water ways Ivan Milutinović was considered the most convenient for both: reclamation and planning. The Conceptualization covers the Main Aims and interests forming plan basis where three factors were selected: urban character, new vs old town, inhabitants and town growth. Follows Existing Land Use Pattern of the Municipal Area. The realization of the Salt Lake Master Plan, as a part of the Municipal Area, is shown through an Overview of Achieved Infrastructure covering Roads, Water Supply, Sewerage, Area Level Storm Water Drainage, Solid Waste Management and, finally, through the Other Municipal Services, such as: Administrative Infrastructure, Health Infrastructure, Greeneries, Water bodies, Socio-Cultural Infrastructure. .
Low-power realization in main blocks of CMOS APS image sensor
Gao, Wei; Shen, Edward; Hornsey, Richard I.
2005-09-01
This paper addresses the optimization of power at the circuit level in the main blocks of CMOS APS image sensors. A pixel bias current of zero during the readout period is shown to reduce the static power and enhance the settling time of the pixel. A balanced operational transconductance amplifier (OTA) has been demonstrated to be a better candidate as an amplifier when employed in a correlated double sampling (CDS) circuit or as a comparator in an analog-to-digital (A/D) converter, as compared to a Miller two-stage amplifier. Using common-mode feedback (CMFB) in an OTA can further reduce the quiescent power of the amplifier. The low power capability of a CMFB OTA is discussed in this paper by performing a comparison with a conventional OTA using a 0.18 μm technology.
Wicaksono, A. D.
2017-06-01
Since the last few years, Indonesia has experienced important events that bring significant changes to the social, political and economic life. The changes directly or indirectly impact the field of planning. With the challenging condition which grows fast and is more complex ahead, and the greater demands on the role of planning, it is required that planning should have higher quality. This paper seeks to answer some questions as follows: (i) How are changes in paradigm and also the development of planning model for the current transition era?, (ii) What is the best way to improve the quality of planning control on the last generation planning model to realize sustainable city?. Analysis steps that will be used to achieve the paper objectives are: (i) Review of planning and sustainable cities theory, (ii) Pattern recognition, (iii) Identifying control mechanisms and sustainable urban forms, (iv) conceptualization. Based on discussion about sustainable cities and control mechanism, some conclusions can be generated as follows: (i) The third generation planning model is based on the theory of expanded system, emphasizing on the constraint of capacity and the ability of planners within the context of larger environment, (ii) There are various theoretical studies that recommend prescriptive model or solution for sustainable urban form and structure. The concepts of Sustainable Cities can be grouped in Neotraditional Development, Urban Containment, Compact City and The Eco-City. The four models above have criteria, namely (i) high density; (ii) a high level of diversity; (iii) mixed land use; (iv) compactness; (5) sustainable transport; (6) passive solar design; (7) Greening Ecological Design. The three main activities in control mechanisms are: Monitoring and Recommendation; a comparative review of the facts (conditions that exist or are developing) with the purpose (expected conditions, set out in urban planning) and recommendations; Evaluation, a review on the
COMPUTER-AIDED BLOCK ASSEMBLY PROCESS PLANNING IN SHIPBUILD-ING BASED ON RULE-REASONING
ZHANG Zhiying; LI Zhen; JIANG Zhibin
2008-01-01
Computer-aided block assembly process planning based on rule-reasoning are developed in order to improve the assembly efficiency and implement the automated block assembly process planning generation in shipbuilding. First, weighted directed liaison graph (WDLG) is proposed to represent the model of block assembly process according to the characteristics of assembly relation, and edge list (EL) is used to describe assembly sequences. Shapes and assembly attributes of block parts are analyzed to determine the assembly position and matched parts of parts used frequently. Then, a series of assembly rules are generalized, and assembly sequences for block are obtained by means of rule reasoning. Final, a prototype system of computer-aided block assembly process planning is built. The system has been tested on actual block, and the results were found to be quite efficiency. Meanwhile, the fundament for the automation of block assembly process generation and integration with other systems is established.
Automation of block assignment planning using a diagram-based scenario modeling method
Hwang In Hyuck
2014-03-01
Full Text Available Most shipbuilding scheduling research so far has focused on the load level on the dock plan. This is be¬cause the dock is the least extendable resource in shipyards, and its overloading is difficult to resolve. However, once dock scheduling is completed, making a plan that makes the best use of the rest of the resources in the shipyard to minimize any additional cost is also important. Block assignment planning is one of the midterm planning tasks; it assigns a block to the facility (factory/shop or surface plate that will actually manufacture the block according to the block characteristics and current situation of the facility. It is one of the most heavily loaded midterm planning tasks and is carried out manu¬ally by experienced workers. In this study, a method of representing the block assignment rules using a diagram was su¬ggested through analysis of the existing manual process. A block allocation program was developed which automated the block assignment process according to the rules represented by the diagram. The planning scenario was validated through a case study that compared the manual assignment and two automated block assignment results.
Automation of block assignment planning using a diagram-based scenario modeling method
Hwang, In Hyuck; Kim, Youngmin; Lee, Dong Kun; Shin, Jong Gye
2014-03-01
Most shipbuilding scheduling research so far has focused on the load level on the dock plan. This is be¬cause the dock is the least extendable resource in shipyards, and its overloading is difficult to resolve. However, once dock scheduling is completed, making a plan that makes the best use of the rest of the resources in the shipyard to minimize any additional cost is also important. Block assignment planning is one of the midterm planning tasks; it assigns a block to the facility (factory/shop or surface plate) that will actually manufacture the block according to the block characteristics and current situation of the facility. It is one of the most heavily loaded midterm planning tasks and is carried out manu¬ally by experienced workers. In this study, a method of representing the block assignment rules using a diagram was su¬ggested through analysis of the existing manual process. A block allocation program was developed which automated the block assignment process according to the rules represented by the diagram. The planning scenario was validated through a case study that compared the manual assignment and two automated block assignment results.
Automation of block assignment planning using a diagram-based scenario modeling method
In Hyuck Hwang
2014-03-01
Full Text Available Most shipbuilding scheduling research so far has focused on the load level on the dock plan. This is because the dock is the least extendable resource in shipyards, and its overloading is difficult to resolve. However, once dock scheduling is completed, making a plan that makes the best use of the rest of the resources in the shipyard to minimize any additional cost is also important. Block assignment planning is one of the midterm planning tasks; it assigns a block to the facility (factory/shop or surface plate that will actually manufacture the block according to the block characteristics and current situation of the facility. It is one of the most heavily loaded midterm planning tasks and is carried out manually by experienced workers. In this study, a method of representing the block assignment rules using a diagram was suggested through analysis of the existing manual process. A block allocation program was developed which automated the block assignment process according to the rules represented by the diagram. The planning scenario was validated through a case study that compared the manual assignment and two automated block assignment results.
Design and realization of a high-speed 12-bit pipelined analog-digital converter IP block
Toprak, Zeynep
2001-01-01
This thesis presents the design, verification, system integration and the physical realization of a monolithic high-speed analog-digital converter (ADC) with 12-bit accuracy. The architecture of the ADC has been realized as a pipelined structure consisting of four pipeline stages, each of which is capable of processing the incoming analog signal with 4-bit accuracy. A bit-overlapping technique has been employed for digital error correction between the pipeline stages so that the influence of ...
Block Diagram of a Black and White TV. Lesson Plan No. 1, Electronic Tech 1.
Hollandsworth, Donald S.
This lesson, which is part of a course in electronics technology, explains the workings of a black-and-white television. It covers the structure and function of the 18 structural blocks of black-and-white television sets. The following materials are included: a lesson plan, transparency masters, and student handouts. The lesson plan includes lists…
Planning and Realization of Complex Intentions in Traumatic Brain Injury and Normal Aging
Kliegel, Matthias; Eschen, Anne; Thone-Otto, Angelika I. T.
2004-01-01
The realization of delayed intentions (i.e., prospective memory) is a highly complex process composed of four phases: intention formation, retention, re-instantiation, and execution. The aim of this study was to investigate if executive functioning impairments are related to problems in the formation, re-instantiation, and execution of a delayed…
Ma, Lijun, E-mail: lijunma@radonc.ucsf.edu [Department of Radiation Oncology, University of California, San Francisco, California (United States); Mason, Erica; Sneed, Penny K.; McDermott, Michael; Polishchuk, Alexei; Larson, David A. [Department of Radiation Oncology, University of California, San Francisco, California (United States); Sahgal, Arjun [Department of Radiation Oncology, Sunnybrook Odette Cancer Center, University of Toronto, Toronto, Ontario (Canada)
2015-03-01
Purpose: To demonstrate the clinical feasibility and potential benefits of sector beam intensity modulation (SBIM) specific to Gamma Knife stereotactic radiosurgery (GKSRS). Methods and Materials: SBIM is based on modulating the confocal beam intensities from individual sectors surrounding an isocenter in a nearly 2π geometry. This is in contrast to conventional GKSRS delivery, in which the beam intensities from each sector are restricted to be either 0% or 100% and must be identical for any given isocenter. We developed a SBIM solution based on available clinical planning tools, and we tested it on a cohort of 12 clinical cases as a proof of concept study. The SBIM treatment plans were compared with the original clinically delivered treatment plans to determine dosimetric differences. The goal was to investigate whether SBIM would improve the dose conformity for these treatment plans without prohibitively lengthening the treatment time. Results: A SBIM technique was developed. On average, SBIM improved the Paddick conformity index (PCI) versus the clinically delivered plans (clinical plan PCI = 0.68 ± 0.11 vs SBIM plan PCI = 0.74 ± 0.10, P=.002; 2-tailed paired t test). The SBIM plans also resulted in nearly identical target volume coverage (mean, 97 ± 2%), total beam-on times (clinical plan 58.4 ± 38.9 minutes vs SBIM 63.5 ± 44.7 minutes, P=.057), and gradient indices (clinical plan 3.03 ± 0.27 vs SBIM 3.06 ± 0.29, P=.44) versus the original clinical plans. Conclusion: The SBIM method is clinically feasible with potential dosimetric gains when compared with conventional GKSRS.
National Alliance of Business, Inc., Washington, DC.
This Planning, Management, and Evaluation (PME) guide was developed by the National Alliance of Business as part of its program of management assistance for Private Industry Councils (PICs). The guide is a tool which PICs can use to improve their capability to plan, manage, and evaluate the programs which they administer, and to establish locally…
3D-Route Planning Method to Realize Missile Cruise Flight
WANG Zheng-jie; FAN Chen; ZHU Qun-Min; TANG Wei
2007-01-01
In order to increase the aircraft's survival in the flight mission, it is necessary to carry out flight mission planning, which includes TF/TA\\+2(terrain following/terrain avoidance/threat avoidance).An approach to 3D-route planning based on A* heuristic search algorithm was selected to determine the routes of fiber optic guidance missile's cruise segment.The cost function was discussed, which was mainly related to the physical obstacle, threat exposure, and aircraft performance characteristics.The digital map techniques were presented, which included setting "no-go" area according to fiber's safety requirement.The optimal or the sub-optimal route was obtained, while the cost function constraints were satisfied and the stored terrain obtained from a real terrain was digitized.The algorithm is validated through simulation and can fulfill the route planning task which focuses on the cruise segment of fiber optic guidance missile.
Kraft, K; Loew, D; Schneider, B; Kemper, F H
1997-08-01
Post-marketing-surveillance studies with herbal drugs usually are prospective prescription-epidemiological studies, which should allow statements on quality, efficacy and safety. Until now neither laws nor concrete normative guidelines for the methodology and the evaluation of post-marketing-surveillance studies are existing which could be used for pharmacovigilance. In the present paper guidelines for planning, realisation and evaluation are presented which should allow studies of high quality. The essential components required for the investigational plan are focussed. Also recommendations on the obligatory, optional and special components of the study protocols are made. Additionally statistical methods which allow the evaluation of the therapeutic efficacy are presented.
A discrete event simulation design for block-based maintenance planning under random machine usage
de Jonge, Bram
2015-01-01
Existing research on block-based preventive maintenance planning generally assumes that machines are either used continuously, or that times until failure do not depend on the actual usage of machines. In practice, however, it is often more realistic to assume that machines are not used continuously
Streltsova Natalya Valeryevna
2014-11-01
Full Text Available Current political situation at the international stage is urging specialists to review the existing strategies for the innovative development of Russian food industry enterprises. Interregional competition causes the need to seek new ways of development of territories and raise the competitiveness of regional economies. In this paper, the author analyzes the factors influencing the formation and fulfillment of Russian enterprises’ innovative potential under the current conditions, and identifies development perspectives and regulation methods for economic relations and competitiveness management within food enterprises. The author estimates the potential efficiency of several focal areas that can lead to a balanced and multiplicative growth based on cross-network extension of the outcome through industrialengineering communication links. The paper describes an authentic strategy for the innovative development of food industry enterprises. Finally, the author describes and suggests the realization of a project, including support measures for the key domain of food industry, infrastructure development and provision of logistics for the agriculture market. The innovative project and practical recommendations offered in the paper can be used by food-processing enterprises as well as by regional and municipal administrative bodies.
IEC 61850控制块服务追踪的实现策略%Realization strategy of IEC 61850 control block service tracking
段斌; 刘艳; 谭成
2013-01-01
IEC 61850 standards realize the communication services configuration through the control block, and service tracking is a newly proposed important content in IEC 61850 Ed2, which can be used to monitor the modification behaviors of the communication services configuration in smart substation online. This paper explores the mechanism and application of service tracking in smart substation, presents the mapping mechanism and processes of attribute values in service tracking data object, and discusses the construction method of service tracking with ACSI Reporting. Furthermore, this paper develops an effective service tracking application mode, which uses control block service tracking to monitor the behavior of configuring the communication services dynamically, consequently, to realize the synchronization management of configuration information of communication services in power system and maintain the conformance of configuration information between the sender and the recipient. This work is supported by National Natural Science Foundation of China (No. 61170191) and Scientific Research Fund of Hunan Provincial Education Department (No. 11CY017).%IEC 61850标准通过控制块实现对通信服务的配置，服务追踪是IEC 61850第2版新增的重要内容，可用于实现对智能变电站中通信服务配置的修改行为进行在线监视。探索了服务追踪在智能变电站的作用机理和应用价值，设计了服务追踪数据对象属性值的映射机制和流程，以及采用ACSI Reporting的服务追踪构造方法。最后，设计并实现了一种服务追踪的有效应用模式，即利用控制块服务追踪监视通信服务动态配置的行为，从而对电力系统通信配置进行同步管理，保证通信接收方与发送方之间配置信息的一致性。
血站供电应急预案的实现%Realization of Power-supply Emergency Plan in Blood Center
张晋
2011-01-01
This paper provides an overview about realization of emergency plan and design and lectotype of main equipment of Qingdao Blood Station.%本文扼要介绍了青岛血站供电应急预案实现以及主要设备的设计、选型.
乔立岩; 张鹏; 魏德宝; 王世元
2015-01-01
A FPGA based NAND Flash bad block management scheme is presented ,on the basis of common bad block management of the non‐volatile NAND Flash memory .The scheme uses bad block replacement strategy to divide all blocks into Data block area and Good block reserved area . T he bad block identification and replacement is realized through the establishment of index‐based bad block marking tables BBT (bad block table) and the bad block map RT T (reserved translate table) .At the same time ,the two tables are saved in the NAND Flash to guarantee the non‐volatile storage of bad block information and the high‐speed performance query of bad blocks .Taking into account the bad block emerging ,bad block identification ,bad block information storage and high‐speed replacement of bad block ,this scheme is the complete solution for bad block management .Experiments showed that this strategy has the advantages of small bad block information capacity ,fast replacement and high reliability .%本文在研究NAND Flash常用坏块管理方法的基础上，提出了一种基于FPGA 的NAND Flash坏块管理方案。该方案运用坏块替换策略，将所有块分为数据块区和好块保留区，通过在FPGA片内RAM建立基于位索引的坏块位标记表BBT （bad block table）和块保留映射表RT T （reserved translate table）实现坏块的识别和替换，同时将两表保存于NAND Flash中，保证了坏块信息的非易失存储和坏块查询的高速性能。本方案全面考虑了坏块产生、坏块识别、坏块信息存储、坏块高速替换，是坏块管理的完整解决方案。经实验表明该方案具有坏块信息容量小、替换速度快、实现可靠等优点。
Quality assurance plan for the High Level Controller for the CBMS Block II
Reid, R.W.; Robbins, I.F.; Stewart, K.A.; Terry, C.L.; Whitaker, R.A.; Wolf, D.A.; Zager, J.C.
1997-09-01
This document establishes the software Quality Assurance Plan (QAP) for the High Level Controller for the Chemical and Biological Mass Spectrometer Block II (HLC/CBMS-II) project activities under the Computing, Robotics, and Education (CRE) Directorate management. It defines the requirements and assigns responsibilities for ensuring, with a high degree of confidence, that project objectives will be achieved as planned. The CBMS Program was awarded to ORNL by the US Army Chemical and Biological Defense command, Aberdeen Proving Ground, Maryland, to design the next version (Block II) mass spectrometer for the detection and identification of chemical and biological warfare agents, to fabricate four engineering prototypes, and to construct eight preproduction units. Section 1 of this document provides an introduction to the HLC/CBMS-II project QAP. Sections 2 and 3 describe the specific aspects of quality assurance as applicable to the project. Section 4 reviews the project approach to risk management. The Risk Management Matrix given in Appendix A is a tool to assess, prioritize, and prevent problems before they occur; therefore, the matrix will be reviewed and revised on a periodic basis. Appendix B shows the quality assurance criteria of the DOE Order 5700.6C and their applicability to this project.
vantVeld, AA
1997-01-01
Accuracy in dose and position, defined as complementary criteria, was determined for blocked photon field calculations with a pencil beam based treatment planning system. The concept of field accuracy has been defined as a combination of deviations in dose and position. Absolute dose deviations were
Ameri, Mohsen; Samavat, Feridoun; Mohajerani, Ezeddin; Fathollahi, Mohammad-Reza
2016-06-01
In the present research, the effect of \\text{ZnO} -based blocking layers on the operational features of \\text{Ti}{{\\text{O}}2} -based dye-sensitized solar cells is investigated. A facile solution-based coating method is applied to prepare an interfacial highly transparent \\text{ZnO} compact blocking layer (CBL) to enhance the efficiency of dye-sensitized solar cells. Different precursor molar concentration were tested to find the optimum concentration. Optical and electrical measurements were carried out to confirm the operation of the CBLs. Morphological characterizations were performed by scanning electron microscopy (SEM) and atomic force microscopy (AFM) to investigate the structure of the compact layers. We have also developed a set of modeling procedures to extract the effective electrical parameters including the parasitic resistances and charged carrier profiles to investigate the effect of CBLs on the dye-sensitized solar cell (DSSC) performance. The adopted modeling approach should establish a versatile framework for diagnosis of DSSCs and facilitates the exploration of critical factors influencing device performance.
Selkowitz, Stephen; Selkowitz, Stephen; Granderson, Jessica; Haves, Philip; Mathew, Paul; Harris, Jeff
2008-06-16
It is widely accepted that if the United States is to reduce greenhouse gas emissions it must aggressively address energy end use in the building sector. While there have been some notable but modest successes with mandatory and voluntary programs, there have also been puzzling failures to achieve expected savings. Collectively, these programs have not yet reached the majority of the building stock, nor have they yet routinely produced very large savings in individual buildings. Several trends that have the potential to change this are noteworthy: (1) the growing market interest in 'green buildings' and 'sustainable design', (2) the major professional societies (e.g. AIA, ASHRAE) have more aggressively adopted significant improvements in energy efficiency as strategic goals, e.g. targeting 'zero energy', carbon-neutral buildings by 2030. While this vision is widely accepted as desirable, unless there are significant changes to the way buildings are routinely designed, delivered and operated, zero energy buildings will remain a niche phenomenon rather than a sector-wide reality. Toward that end, a public/private coalition including the Alliance to Save Energy, LBNL, AIA, ASHRAE, USGBC and the World Business Council for Sustainable Development (WBCSD) are developing an 'action plan' for moving the U.S. commercial building sector towards zero energy performance. It addresses regional action in a national framework; integrated deployment, demonstration and R&D threads; and would focus on measurable, visible performance indicators. This paper outlines this action plan, focusing on the challenge, the key themes, and the strategies and actions leading to substantial reductions in GHG emissions by 2030.
Goudarzi, H.; Dousti, M. J.; Shafaei, A.; Pedram, M.
2014-05-01
This paper presents a physical mapping tool for quantum circuits, which generates the optimal universal logic block (ULB) that can, on average, perform any logical fault-tolerant (FT) quantum operations with the minimum latency. The operation scheduling, placement, and qubit routing problems tackled by the quantum physical mapper are highly dependent on one another. More precisely, the scheduling solution affects the quality of the achievable placement solution due to resource pressures that may be created as a result of operation scheduling, whereas the operation placement and qubit routing solutions influence the scheduling solution due to resulting distances between predecessor and current operations, which in turn determines routing latencies. The proposed flow for the quantum physical mapper captures these dependencies by applying (1) a loose scheduling step, which transforms an initial quantum data flow graph into one that explicitly captures the no-cloning theorem of the quantum computing and then performs instruction scheduling based on a modified force-directed scheduling approach to minimize the resource contention and quantum circuit latency, (2) a placement step, which uses timing-driven instruction placement to minimize the approximate routing latencies while making iterative calls to the aforesaid force-directed scheduler to correct scheduling levels of quantum operations as needed, and (3) a routing step that finds dynamic values of routing latencies for the qubits. In addition to the quantum physical mapper, an approach is presented to determine the single best ULB size for a target quantum circuit by examining the latency of different FT quantum operations mapped onto different ULB sizes and using information about the occurrence frequency of operations on critical paths of the target quantum algorithm to weigh these latencies. Experimental results show an average latency reduction of about 40 % compared to previous work.
Morin, O; Held, M; Kirby, N; Perez-Andujar, A; Chuang, C; Pouliot, J
2012-06-01
The sizing and placement of lung blocks for total-body irradiation (TBI) is critical to prevent lung toxicities and maintain effective treatments. During modulated-arc TBI (MATBI) treatment, the patient is stationary near the floor while open-field beams with varying exposures are delivered. The inverse planning process currently aims for a uniform dose to the body, without accounting for the presence of lung blocks. This study investigates the possibility of including the effect of these blocks in the MATBI optimization process. Dosimetric comparisons were performed using a water tank and a simple stack of solid water slabs. Lungs blocks made of cerrobend were fabricated and imaged using on-board megavoltage CBCT (MVCBCT). The reconstructed MVCBCT images were precisely registered with the reference CT for inverse planning. The cerrobend blocks were contoured in the planning system and the density was overridden to 9.3 g/cm(3) . Simulated doses in Pinnacle were compared to ion chamber, diode array and gaf-chromic film measurements obtained at 1.0, 5.0, 10.0 and 20.0 cm depths. Specific optimization objectives on the lungs were tested on 5 patients including a lung re-treatment. The maximum difference between ion chamber measurements and the treatment planning predictions was 2.4%. The measurements profiles with the diode array correlated reasonably well (10%) on the surface. Lung blocks reconstructed with MVCBCT were structuraly accurate without significant metal artifacts. A comparison of MATBI plans on patients shows that inclusion of lung blocks during optimization can reduce hot and cold areas in the lungs and the sternum. Reasonable predictions of the lung block transmission can be obtained following the developed technique using megavoltage CBCT. Thus, lung blocks can be included in the MATBI inverse planning process, which can help prevent complications and local failure. © 2012 American Association of Physicists in Medicine.
Chang, Jonghwa [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)
2015-10-15
High temperature gas cooled reactor has been developed since 1956. Fundamental idea of a gas cooled reactor is to achieve high temperature which is suitable for high efficiency application such as electricity generation. The core is composed of ceramics, graphite blocks which are mechanical stable up to very high temperature. Fuel is ceramics, TRISO ( tri-isotropic coated micro particle) whose dense coating layers work as small radioactivity containment. Coolant is inert gas, helium, which is stable chemically, neutronically, and thermal hydraulically. Several test reactors such as DRE, PB-1, FSV, AVR, THTR, HTTR, HTR-10 were built and demonstrated their safety. Large GA-HTR, RSA-PBMR projects are canceled and US-NGNP project is idling. Only Chinese HTR-PM demonstrator is under construction. HTGR has long history of development. For realization and market penetration, VHTR community should look at niche market such as carbon free energy supply to industry complex, electric power for small grid, carbon free hydrogen production, power source for space colony. Technology Readiness Level should be advanced to get proper investment from industry. For this, cooperation between international R and D institutions is required. Clearly divided role between universities, research institutions, and industries will reduce complication and shorten VHTR realization day.
Horiguchi, Jun; Ishifuro, Minoru; Fukuda, Hiroshi; Akiyama, Yuji; Ito, Katsuhide
2005-02-01
In the treatment of trigeminal neuralgia, Gasserian block under fluoroscopical guidance may be difficult because of anatomic variability, and difficulty in identification of the foramen ovale. We introduce how to use three-dimensional CT in the preprocedural planning. We determine the skull-rotation angle in which the foramen ovale is best visualized, the relationship (distance, angle) between the virtual puncture point and anatomical landmarks, and the distance between the virtual puncture point and the foramen.
Kaiserfeld, Thomas
2016-03-01
Studies of Big Science have early on focused on instrumentation and scientific co-operation in large organizations, later on to take into account symbolic values and specific research styles while more recently also involving the relevance of commercial interests and economic development as well as the assimilation of research traditions. In accordance with these transformed practices, this presentation will analyze how an organization with the purpose of realizing a Big-Science facility, The European Spallation Source, has successfully managed to present the project as relevant to different national and international policy-makers, to the community of European neutron researchers as well as to different industrial interests. All this has been achieved in a research-policy environment, which has been the subject to drastic transformations, from calls to engage researchers from the former eastern bloc in the early 1990s via competition with American and Asian researchers at the turn of the century 2000 to intensified demands on business applications. During this process, there has also been fierce competition between different potential sites in the U.K., Germany, Spain, Hungary and Sweden, not once, but twice. The project has in addition been plagued by withdrawals of key actors as well as challenging problems in the field of spallation-source construction. Nevertheless, the European Spallation Source has survived from the early 1990s until today, now initiating the construction process at Lund in southern Sweden. In this presentation, the different measures taken and arguments raised by the European Spallation Source project in order to realize the facility will be analysed. Especially the different designs of the European Spallation Source will be analysed as responses to external demands and threats.
田文谦; 戴德宝; 陈卓宁; 张金; 区士颀
2001-01-01
提出了一种以需求计划(MRP)算法为基础的生产计划系统的实现方法，算法的求解与能力的平衡在VC＋＋平台上完成；系统基础数据的管理、操作界面的集成基于VFP平台。物料快速分解、能力平衡可视化技术与VFP强大灵活的数据库功能相结合，实现了MIS各模块的信息集成以及MIS与CAD/CAPP的无缝集成。%A method to realize the production planning system based on the material requirements planning(MRP)algorithm. The derivation of the algorithm and the balance of capacity are implemented on the VC＋ ＋ platform. The management of the system data base and the integration of the operating interfaces are implemented on the VFP platform. With the combination of the visualization of quick material breaking－ up and balance of capacity with the powerful and flexible function of VFP data base,the information integration of the MIS modules and the seamless integration of MIS with CAD/CAPP are realized.
李翠红; 柴跃廷; 杨家本
2001-01-01
To satisfy customers' personalized requirements in the lowest cost and highest quality in an agile supply chain management system,it is necessary to make optimal working plans based on orders promptly and guarantee the plans' feasibility,constrained by multiple resource limitations from multiple independent and autonomous entities.Planning and coordination are the key components of agile supply chain management and multi-agent system is an effective technology to realize the planning and coordination system in agile supply chain management.In this paper,a planning and coordination scheme of two levels is proposed,then the design and realization of the planning and coordination system based on multi-agent is introduced.It is proved in practice that this solution will greatly enhance enterprises' agility and increase their competence in an environment full of competition,cooperation and dynamics.%在敏捷供需链管理系统中，为了达到以最低的成本、最高的质量满足客户个性化需求的目标，必须面向订单，快速制定最优的订单执行计划，并保证计划的可行性。敏捷供需链中的计划需要考虑多种资源，需要多个独立、分布的实体之间的合作与协调。计划与协调是敏捷供需链管理的基础，多代理系统是实现敏捷供需链计划与协调系统的有效方案。本文提出了一个二级敏捷供需链计划与协调机制，并给出了基于多代理的计划与协调系统的设计与实现。实践证明，该方案将极大地增加企业的敏捷性，提高企业在竞争、合作、动态环境下的竞争能力。
Hooper, Paula; Knuiman, Matthew; Foster, Sarah; Giles-Corti, Billie
2015-11-01
Planning policy makers are requesting clearer guidance on the key design features required to build neighbourhoods that promote active living. Using a backwards stepwise elimination procedure (logistic regression with generalised estimating equations adjusting for demographic characteristics, self-selection factors, stage of construction and scale of development) this study identified specific design features (n=16) from an operational planning policy ("Liveable Neighbourhoods") that showed the strongest associations with walking behaviours (measured using the Neighbourhood Physical Activity Questionnaire). The interacting effects of design features on walking behaviours were also investigated. The urban design features identified were grouped into the "building blocks of a Liveable Neighbourhood", reflecting the scale, importance and sequencing of the design and implementation phases required to create walkable, pedestrian friendly developments.
Realizability: a historical essay
Oosten, J. van
2001-01-01
The purpose of this short paper is to sketch the development of a few basic topics in the history of Realizability The number of topics is quite limited and reects very much my own personal taste biases and prejudices Realizability has over the past years developed into a subject of such dimensions
Miriam I E Freundt
Full Text Available BACKGROUND: Cervical selective nerve root block (CSNRB is a well-established, minimally invasive procedure to treat radicular cervical pain. However, the procedure is technically challenging and might lead to major complications. The objective of this study was to evaluate the feasibility of a three-dimensional puncture planning and two-dimensional laser-guidance system for CSNRB in an ex-vivo model. METHODS: Dyna-CT of the cervical spine of an ex-vivo lamb model was performed with the Artis Zee® Ceiling (Siemens Medical Solutions, Erlangen, Germany to acquire multiplanar reconstruction images. 15 cervical nerve root punctures were planned and conducted with the syngo iGuide® laser-guidance system. Needle tip location and contrast dye distribution were analyzed by two independent investigators. Procedural, planning, and fluoroscopic time, tract length, and dose area product (DAP were acquired for each puncture. RESULTS: All 15 punctures were rated as successful with 12 punctures on the first attempt. Total procedural time was approximately 5 minutes. Mean planning time for the puncture was 2.03 (±0.39 min. Mean puncture time was 2.16 (±0.32 min, while mean fluoroscopy time was 0.17 (±0.06 min. Mean tract length was 2.68 (±0.23 cm. Mean total DAP was 397.45 (±15.63 µGy m(2. CONCLUSION: CSNRB performed with Dyna-CT and the tested laser guidance system is feasible. 3D pre-puncture planning is easy and fast and the laser-guiding system ensures very accurate and intuitive puncture control.
Successful product realization strategies
Peeples, John; Boulton, William R.
1995-02-01
Product realization is the process of defining, designing, developing, and delivering products to the market. While the main thrust of this JTEC panel was to conduct a complete investigation of the state of Japanese low-cost electronic packaging technologies, it is very difficult to totally separate the development of technology and products from the product realization process. Japan's electronics firms adhere to a product realization strategy based on a strong customer focus, a consistent commitment to excellence in design, and a cost-effective approach to technology commercialization. The Japanese product-pull strategy has been a successful driver and influencing factor in every aspect of the product development cycle.
Department of Veterans Affairs — This dataset is provided as a requirement of OMB’s Integrated Data Collection (IDC) and links to VA’s Realized Cost Savings and Avoidances data in JSON format. Cost...
Turner, W.
2007-01-01
Consider representation theory associated to symmetric groups, or to Hecke algebras in type A, or to q-Schur algebras, or to finite general linear groups in non-describing characteristic. Rock blocks are certain combinatorially defined blocks appearing in such a representation theory, first observed by R. Rouquier. Rock blocks are much more symmetric than general blocks, and every block is derived equivalent to a Rock block. Motivated by a theorem of J. Chuang and R. Kessar in the case of sym...
Realizing Corporate Responsibility
Girschik, Verena
This doctoral dissertation aims to understand how companies realize corporate responsibility - both how they perform corporate responsibility in particular local contexts and how they negotiate understandings of what corporate responsibility means. It builds on an inductive case study of the Danish...... in this dissertation unfold distinct yet interdependent processes of positioning and framing that constitute new ways of performing and understanding corporate responsibility....
Block TERM factorization of block matrices
SHE Yiyuan; HAO Pengwei
2004-01-01
Reversible integer mapping (or integer transform) is a useful way to realize Iossless coding, and this technique has been used for multi-component image compression in the new international image compression standard JPEG 2000. For any nonsingular linear transform of finite dimension, its integer transform can be implemented by factorizing the transform matrix into 3 triangular elementary reversible matrices (TERMs) or a series of single-row elementary reversible matrices (SERMs). To speed up and parallelize integer transforms, we study block TERM and SERM factorizations in this paper. First, to guarantee flexible scaling manners, the classical determinant (det) is generalized to a matrix function, DET, which is shown to have many important properties analogous to those of det. Then based on DET, a generic block TERM factorization,BLUS, is presented for any nonsingular block matrix. Our conclusions can cover the early optimal point factorizations and provide an efficient way to implement integer transforms for large matrices.
Hansen, Peter Reinhard; Lunde, Asger; Voev, Valeri Radkov
2014-01-01
We introduce a multivariate generalized autoregressive conditional heteroskedasticity (GARCH) model that incorporates realized measures of variances and covariances. Realized measures extract information about the current levels of volatilities and correlations from high-frequency data, which...... is particularly useful for modeling financial returns during periods of rapid changes in the underlying covariance structure. When applied to market returns in conjunction with returns on an individual asset, the model yields a dynamic model specification of the conditional regression coefficient that is known...... as the beta. We apply the model to a large set of assets and find the conditional betas to be far more variable than usually found with rolling-window regressions based exclusively on daily returns. In the empirical part of the paper, we examine the cross-sectional as well as the time variation...
Ship Block Transportation Scheduling Problem Based on Greedy Algorithm
Chong Wang
2016-05-01
Full Text Available Ship block transportation problems are crucial issues to address in reducing the construction cost and improving the productivity of shipyards. Shipyards aim to maximize the workload balance of transporters with time constraint such that all blocks should be transported during the planning horizon. This process leads to three types of penalty time: empty transporter travel time, delay time, and tardy time. This study aims to minimize the sum of the penalty time. First, this study presents the problem of ship block transportation with the generalization of the block transportation restriction on the multi-type transporter. Second, the problem is transformed into the classical traveling salesman problem and assignment problem through a reasonable model simplification and by adding a virtual node to the proposed directed graph. Then, a heuristic algorithm based on greedy algorithm is proposed to assign blocks to available transporters and sequencing blocks for each transporter simultaneously. Finally, the numerical experiment method is used to validate the model, and its result shows that the proposed algorithm is effective in realizing the efficient use of the transporters in shipyards. Numerical simulation results demonstrate the promising application of the proposed method to efficiently improve the utilization of transporters and to reduce the cost of ship block logistics for shipyards.
Smith, Martin H.
1992-01-01
Describes an educational game called "Population Blocks" that is designed to illustrate the concept of exponential growth of the human population and some potential effects of overpopulation. The game material consists of wooden blocks; 18 blocks are painted green (representing land), 7 are painted blue (representing water); and the remaining…
Smith, Martin H.
1992-01-01
Describes an educational game called "Population Blocks" that is designed to illustrate the concept of exponential growth of the human population and some potential effects of overpopulation. The game material consists of wooden blocks; 18 blocks are painted green (representing land), 7 are painted blue (representing water); and the remaining…
Allahyar Geramy
2015-12-01
Full Text Available Background and Aims: Cl II malocclusion is one of the most common abnormalities in human societies and using a simple, affordable and accessible treatment that can be provided by general practitioners or specialists, to prevent future malocclusion complications is vital. Cl II malocclusion treatment using functional appliances such as twin block and anterior inclined bite plan have less cost, side effects and complications compared to fixed orthodontic or orthosurgery. Until now, the dentoskeletal changes resulting from the application of twin block and anterior inclined bite plan in patients with Class II malocclusion has not been evaluated. The objective of the present study was to assess the dentoskeletal changes following the use of twin-block functional appliance and inclined anterior bite plan in the patients with class II malocclusion div 1 during mixed dentition. Materials and Methods: In this retrospective cohort trial, 60 patients with the definitive diagnosis of Class II div. 1 malocclusion having ANB>2 and FMA angel between 20 and 30 and without any previous treatment or syndrome who were treated with twin-block or inclined anterior bite plan appliance were selected and their lateral cephalometries were traced before and after treatment. Selected distance and angular landmarks were measured on the cephalograms with the good reliability (ICC=0.953 and the changes occurred in the landmarks were statistically analyzed using Student t test. Results: Due to the increased mandibular growth, most of the landmarks experienced significant changes following the treatment with twin-block and inclined bite plan (P0.05, however, SNA (P=0.04, overjet (P=0.007 and wits appraisal (P=0.004 changed differently after using the appliances. Conclusion: Despite with most similarities of both twin-block and anterior inclined bite plan to correct class II div. 1 malocclusion, Due to the advantages of anterior inclined bite plan such as less size, good
Realization theory for rational systems
Ně mcová, J.; Schuppen, J.H. van
2008-01-01
In this paper we solve the problem of realization of response maps for rational systems. Sufficient and necessary conditions for a response map to be realizable by a rational system are presented. The properties of rational realizations such as observability, controllability, and minimality are stud
无
1996-01-01
@@ The Zitongdong Block (Eastern Zitong Block) is located in the northwest of the Sichuan Basin. Tectonically, it is situated in the east part of Zitong Depression, southeast of mid-Longmenshan folded and faulted belt( as shown on Fig. 8 ), covering an area of 1 730 km2. The traffic is very convenient, the No. 108 national highway passes through the north of the block. Topographically, the area belongs to low hilly land at the elevation of 500-700 m.
FEEDBACK REALIZATION OF HAMILTONIAN SYSTEMS
CHENGDaizhan; XIZairong
2002-01-01
This paper investigates the relationship between state feedback and Hamiltonican realization.Firest,it is proved that a completely controllable linear system always has a state feedback state equation Hamiltonian realization.Necessary and sufficient conditions are obtained for it to have a Hamiltonian realization with natural output.Then some conditions for an affine nonlinear system to have a Hamiltonian realization are given.some conditions for an affine nonlinear system to have a Hamiltonian realization are given.For generalized outputs,the conditions of the feedback,keeping Hamiltonian,are discussed.Finally,the admissible feedback controls for generalized Hamiltonian systems are considered.
Realizing Controllable Quantum States
Takayanagi, Hideaki; Nitta, Junsaku
-- 4. Mesoscopic superconductivity with unconventional superconductor or ferromagnet. Ultraefficient microrefrigerators realized with ferromagnet-superconductor junctions / F. Giazotto et al. Anomalous charge transport in triplet superconductor junctions by the synergy effect of the proximity effect and the mid gap Andreev resonant states / Y. Tanaka and S. Kashiwaya. Paramagnetic and glass states in superconductive YBa[symbol]Cu[symbol]O[symbol] ceramics of sub-micron scale grains / H. Deguchi et al. Quantum properties of single-domain triplet superconductors / A. M. Gulian and K. S. Wood. A numerical study of Josephson current in p wave superconducting junctions / Y. Asano et al. Tilted bi-crystal sapphire substrates improve properties of grain boundary YBa[symbol]Cu[symbol]O[symbol] junctions and extend their Josephson response to THZ frequencies / E. Stepantsov et al. Circuit theory analysis of AB-plane tunnel junctions of unconventional superconductor Bi[symbol]Sr[symbol]Ca[symbol]Cu[symbol]O[symbol] / I. Shigeta et al. Transport properties of normal metal/anisotropic superconductor junctions in the eutectic system Sr[symbol]RuO[symbol]Ru / M. Kawamura et al. Macroscopic quantum tunneling in d-wave superconductor Josephson / S. Kawabata et al. Quasiparticle states of high-T[symbol] oxides observed by a Zeeman magnetic field response / S. Kashiwaya et al. Experimentally realizable devices for controlling the motion of magnetic flux quanta in anisotropic superconductors: vortex lenses, vortex diodes and vortex pumps / S. Savel'ev and F. Nori. Stability of vortex-antivortex "molecules" in mesoscopic superconducting triangles / V. R. Misko et al. Superconducting network with magnetic decoration - Hofstadter butterfly in spatially modulated magnetic field / Y. Iye et al. Observation of paramagnetic supercurrent in mesoscopic superconducting rings and disks using multiple-small-tunnel-junction method / A. Kanda et al. Guidance of vortices in high
无
1996-01-01
@@ Zitongxi Block (Western Zitong Block), is located in Zitong County, northwest of Sichuan Province (as shown on Fig. 8 ). Geologically. it is situated in the Zitong Depression, southwest of the middle Longmenshan faulted and folded belt, covering an area of 1 830 km2. Transportation is very convenient. A crisscross network of highways run through the block and the Baocheng railway is nearby. The climate is moderate. Most area belongs to hilly land with the elevation of 500-600 m.The Tongjiang River runs across the area.
无
1996-01-01
@@ Chengzikou Block is located in the north of Hekou district, Dongying City, Shandong Province, adjacent to Bohai Bay. It can be geographically divided into three units: onshore, transitional zone and offshore ultrashallow zone, totally covering an area of 470 km2. The southern onshore area is low and gentle in topography;the northern shallow sea is at water depths of 2-8 m below sea level, and the transitional zone occupies more than 60% of the whole block. The climate belongs to temperate zone with seasonal wind. Highways are welldeveloped here, and the traffic is very convenient. The Chengzikou Block is about 80 km away from Dongying City and 290 km from Jinan City in the south. The northern offshore area of the block is 160 km away from Longkou port in the east and only 38 km away in the west from Zhuangxi port.
无
1996-01-01
@@ Longmenshan Block is located in Jiange County of Jiangyou City in the northwest of Sichuan Basin. covering an area of 2 628 km2. Geologically, it is situated in the Mid-Longmenshan fault and fold belt, neighbouring Zitong Depression in its southeast. There are mountains surrounding its northwest , the rest area being hilly land,with the elevation of 500-700 m. The BaoCheng railway and the No. 108 highway run through the block, the traffic is very convenient.
无
1996-01-01
@@ The Chadong Block, located in the east of Qaidam Basin, Qinghai Province, covers an area of 12 452 km2. It is bounded by Kunlum Mountains in the south and the northwest is closely adjacent to Aimunike Mountain.Rivers are widely distributed, which always run in NWSE direction, including the Sulunguole, Qaidam and Haluwusu Rivers. The traffic condition is good, the Qinghai-Tibet highway stretching through the whole area and the Lan-Qing railway, 20-50 km away from the block, passing from north to west. A lot of Mongolia minority people have settled there, of which herdsmen always live nearby the Qaidam River drainage area.
FEEDBACK REALIZATION OF HAMILTONIAN SYSTEMS
CHENG Daizhan; XI Zairong
2002-01-01
This paper investigates the relationship between state feedback and Hamiltonian realizatiou. First, it is proved that a completely controllable linear system always has a state feedback state equation Hamiltonian realization. Necessary and sufficient conditions are obtained for it to have a Hamiltonian realization with natural outpnt. Then some conditions for an affine nonlinear system to have a Hamiltonian realization arc given.For generalized outputs, the conditions of the feedback, keeping Hamiltonian, are discussed. Finally, the admissible feedback controls for generalized Hamiltonian systems are considered.
Developing communications requirements for Agile Product Realization
Forsythe, C.; Ashby, M.R.
1994-03-01
Sandia National Laboratories has undertaken the Agile Product Realization for Innovative electroMEchanical Devices (A-PRIMED) pilot project to develop and implement technologies for agile design and manufacturing of electrochemical components. Emphasis on information-driven processes, concurrent engineering and multi-functional team communications makes computer-supported cooperative work critical to achieving significantly faster product development cycles. This report describes analyses conducted in developing communications requirements and a communications plan that addresses the unique communications demands of an agile enterprise.
Realizations of the Canonical Representation
M K Vemuri
2008-02-01
A characterisation of the maximal abelian subalgebras of the bounded operators on Hilbert space that are normalised by the canonical representation of the Heisenberg group is given. This is used to classify the perfect realizations of the canonical representation.
Realization of Fractal Affine Transformation
无
2001-01-01
This paper gives the definition of fractal affine transformation and presents a specific method for its realization and its cor responding mathematical equations which are essential in fractal image construction.
Option Pricing using Realized Volatility
Stentoft, Lars Peter
In the present paper we suggest to model Realized Volatility, an estimate of daily volatility based on high frequency data, as an Inverse Gaussian distributed variable with time varying mean, and we examine the joint properties of Realized Volatility and asset returns. We derive the appropriate...... benchmark model estimated on return data alone. Hence the paper provides evidence on the value of using high frequency data for option pricing purposes....
Option Pricing using Realized Volatility
Stentoft, Lars Peter
In the present paper we suggest to model Realized Volatility, an estimate of daily volatility based on high frequency data, as an Inverse Gaussian distributed variable with time varying mean, and we examine the joint properties of Realized Volatility and asset returns. We derive the appropriate d...... benchmark model estimated on return data alone. Hence the paper provides evidence on the value of using high frequency data for option pricing purposes....
Single Boson Realizations of the Higgs Algebra
RUANDong; WUChu; SUNHong-Zhou
2003-01-01
We obtained for the Higgs algebra three kinds of single boson realizations such as the unitary Holstein-Primakoff-like realization, the non-unitary Dyson-like realization, and the unitary Villain-like realization. The corre-sponding similarity transformations between the Holstein-Primakoff-like realizations and the Dyson-like realizations are given.
On Hamiltonian realization of time-varying nonlinear systems
无
2007-01-01
This paper Investigates Hamiltonian realization of time-varying nonlinear (TVN) systems, and proposes a number of new methods for the problem. It is shown that every smooth TVN system can be expressed as a generalized Hamiltonian system if the origin is the equilibrium of the system. If the Jacooian matrix of a TVN system is nonsingu-lar, the system has a generalized Hamiltonian realization whose structural matrix and Hamiltonian function are given explicitly. For the case that the Jacobian matrix is singular, this paper provides a constructive decomposition method, and then proves that a TVN system has a generalized Hamiltonian realization if its Jacobian matrix has a nonsingular main diagonal block. Furthermore, some sufficient (necessary and sufficient) conditions for dissipative Hamiltonian realization of TVN systems are also presented in this paper.
游泳水上训练计划计算机管理软件的设计与实现%Design and realization of software wizard for swimming pool training plan
白慕炜; 沈宇鹏; 张晓琳
2012-01-01
科学有效的游泳水上训练计划地制定和实施对提高游泳训练水平至关重要。目前，国内教练员训练计划制定和管理大都处于纸笔和word文档层次。本研究以ACCESS2003作为底层数据库，采用DELPH17．0编程，研制开发了游泳水上训练计划计算机管理软件。该软件具有辅助教练员完成训练计划制定、训练负荷统计、训练数据计算等多种功能，可帮助教练员制定、修改、查询及打印训练计划，可按年度、周期等自定义时间统计训练负荷。软件的开发弥补了国内还没有同类软件的不足，具有原创性价值，能帮助教练员在制定训练计划前掌握训练负荷信息，并在训练计划实施后，通过软件对训练负荷的统计有效的对训练计划进行评估和改进，从而提高游泳训练科学化和信息化管理水平。%The establishment and implementation of an effective and scientific training plan is of much importance for raising swimming training level. Most coaches in China establish and manage athletes training plan with traditional written documents. By taking ACCESS 2003 as database, this study adopted DELPHI 7.0 program to develop a software wizard for swimming pool training, with which the coaches could formulate, change, search and print training plans, as well as calculate training load at a user - defined term. Also, the software made up for the lack of such software in China. With the software, the coaches could learn about the training load before formulating a plan and evaluate and improve the plan after load calculation, so as to improve the management of swimming training scientifically.
Space project IONOSAT- MICRO - goals and realization
Korepanov, Valery; Lizunov, Georgii; Fedorov, Oleg
2013-04-01
The IONOSAT-MICRO project is a first stage of IONOSAT program devoted to the multi-point global monitoring of dynamic processes in the ionosphere. The IONOSAT program is planned to be realized in 2015-2020 with the help of three satellites at coordinated low Earth orbits (LEO). IONOSAT-MICRO is the forerunner project scheduled for launch in 2014 at sun-synchronous orbit with the aim to test the IONOSAT mission scientific postulates and preliminary collection of related space data. The main goal of the IONOSAT-MICRO project is the systematic study of the dynamic response of the ionosphere to the influence "from above" (sun, geomagnetic activity) and "from below" (powerful meteorological, seismic and anthropogenic impacts). More in details, the study of following formations in the ionosphere is foreseen: - Space-temporal structure and global distribution of inhomogeneities in neutral atmosphere and ionosphere; - Global structure and dynamics of quasi-stationary electric currents, electric and magnetic fields; - Wave structures and turbulences at different spatial and temporal scales. To realize such a research, the scientific payload of the MICROSAT spacecraft will provide the measurements of following parameters: - Neutral gas and plasma parameters - concentration, temperature; - DC-ELF-VLF electromagnetic field vectors and ELF-VLF plasma current fluctuations; - Total electron content (TEC); - Spectral content of plasma oscillations. Synchronous experiments with ground support facilities - both active and passive ones - are also foreseen. The IONOSAT-MICRO project will be realized onboard of MICROSAT microsatellite platform, manufactured by Yuzhnoye Design Office with new experimental models of ammonia propulsion system, battery, solar arrays and panels with thermal control coating, the in-flight tests of which are also planned in frames of the project. The composition of the scientific equipment developed by the international team of participants and sensors
Multiple realizability and biological laws.
Raerinne, Jani P; Eronen, Markus I
2012-01-01
We critically analyze Alexander Rosenberg's argument based on the multiple realizability of biological properties that there are no biological laws. The argument is intuitive and suggestive. Nevertheless, a closer analysis reveals that the argument rests on dubious assumptions about the nature of natural selection, laws of nature, and multiple realizability. We also argue that the argument is limited in scope, since it applies to an outmoded account of laws and the applicability of the argument to other more promising accounts of laws is questionable. Another concern of ours is that the relation between multiple realizability and natural selection is more complex than Rosenberg acknowledges. Finally, we claim that an explanation for why Rosenberg's argument appears persuasive and appealing is that the argument is based on an inflated concept of multiple realizability that rests on unreliable intuitions concerning what counts as a different realization of the same property. Consequently, we argue that the argument is at best inconclusive and at worst false insofar as its implications for the existence of biological laws are concerned.
吴尚鸿
2011-01-01
阐述了＂低碳生活＂与＂低碳生态城市＂的概念和两者之间的关系,揭示了低碳循环经济是世界发展的趋势,低碳生态城市是低碳循环经济发展的必然过程,低碳生活是低碳生态城市规划的终极目标,同时指出在城市规划中仅仅是运用＂低碳循环经济＂的先进技术理论规划出＂低碳城市＂思路是远远不够的,必须依托于＂低碳生活＂才能实现低碳生态城市的规划目的。%This paper elaborated the concept and the relationship of ＂low carbon life＂ and ＂low carbon ecological city＂,revealed the low carbon circulation economy was the trend of world development,low carbon ecological city was the inevitable process of low carbon circulation economy development,low carbon life was the ultimate goal of low carbon ecological city planning.It also pointed out that in city planning just using the advanced technology theory of ＂low carbon economy＂ planed the thought of ＂low carbon city＂ was far insufficient,must rely on the ＂low carbon life＂ in order to achieve low carbon ecological city planning purpose.
Hardware Realization of Chaos Based Symmetric Image Encryption
Barakat, Mohamed L.
2012-06-01
This thesis presents a novel work on hardware realization of symmetric image encryption utilizing chaos based continuous systems as pseudo random number generators. Digital implementation of chaotic systems results in serious degradations in the dynamics of the system. Such defects are illuminated through a new technique of generalized post proceeding with very low hardware cost. The thesis further discusses two encryption algorithms designed and implemented as a block cipher and a stream cipher. The security of both systems is thoroughly analyzed and the performance is compared with other reported systems showing a superior results. Both systems are realized on Xilinx Vetrix-4 FPGA with a hardware and throughput performance surpassing known encryption systems.
Dejan S. Vujić
2004-05-01
Full Text Available Ubrzani razvoj komercijalnih telekomunikacionih sistema stvorio je mogućnost da se deo vojnih telekomunikacionih potreba, posebno u mirnodopskim uslovima može u potpunosti zadovoljiti upotrebom komercijalne tehnologije. Izviđački sistem, zasnovan na specifičnoj vojnoj tehnologiji koja eksploatiše komercijalne resurse, poput pasivnih radarskih sistema i akustičkih senzora dostupnih na komercijalnom tržištu, može predstavljati primer jednostavnog i vrlo efikasnog sistema. Potrebna komunikacija sa pretpostavljenom komandom kao i akcije koje se sprovode na osnovu dobijenih rezultata, mogu biti podržane komercijalnim sistemima zasnovanim na savremenim tehnološkim rešenjima, poput adaptivnih modulacionih postupaka i prenosa signala u proširenom spektru sa direktnom sekvencom i/ili frekvencijskim skakanjem i višestrukim pristupom na bazi kodnog multipleksa. Ovako organizovani sistemi u potpunosti zadovoljavaju mirnodopske potrebe Vojske SCG, dok se primena delimično ili potpuno, širi i na slučajeve sukoba ograničenog intenziteta antiteroristička dejstva i slučajeve elementarnih nepogoda. / Fast progress in commercial communications systems development has made possibilities to fulfill communications needs in military organizations especially during the periods of peace. A reconnaissance system, based on specific military technology such as passive radar systems and acoustic sensors, available in commercial market, represents a possible realization of a simple and highly efficient system. Necessary communication with a higher command, also as actions that are made based on gathered information, could supported through use of commercial communications systems employing adaptive modulation processes, direct sequence and frequency hopping spread spectrum communications and code division multiple access. In this way organized systems completely fulfill communication needs of the Army of Serbia and Montenegro during peacetime, but the
Approximate Counting of Graphical Realizations.
Erdős, Péter L; Kiss, Sándor Z; Miklós, István; Soukup, Lajos
2015-01-01
In 1999 Kannan, Tetali and Vempala proposed a MCMC method to uniformly sample all possible realizations of a given graphical degree sequence and conjectured its rapidly mixing nature. Recently their conjecture was proved affirmative for regular graphs (by Cooper, Dyer and Greenhill, 2007), for regular directed graphs (by Greenhill, 2011) and for half-regular bipartite graphs (by Miklós, Erdős and Soukup, 2013). Several heuristics on counting the number of possible realizations exist (via sampling processes), and while they work well in practice, so far no approximation guarantees exist for such an approach. This paper is the first to develop a method for counting realizations with provable approximation guarantee. In fact, we solve a slightly more general problem; besides the graphical degree sequence a small set of forbidden edges is also given. We show that for the general problem (which contains the Greenhill problem and the Miklós, Erdős and Soukup problem as special cases) the derived MCMC process is rapidly mixing. Further, we show that this new problem is self-reducible therefore it provides a fully polynomial randomized approximation scheme (a.k.a. FPRAS) for counting of all realizations.
Approximate Counting of Graphical Realizations.
Péter L Erdős
Full Text Available In 1999 Kannan, Tetali and Vempala proposed a MCMC method to uniformly sample all possible realizations of a given graphical degree sequence and conjectured its rapidly mixing nature. Recently their conjecture was proved affirmative for regular graphs (by Cooper, Dyer and Greenhill, 2007, for regular directed graphs (by Greenhill, 2011 and for half-regular bipartite graphs (by Miklós, Erdős and Soukup, 2013. Several heuristics on counting the number of possible realizations exist (via sampling processes, and while they work well in practice, so far no approximation guarantees exist for such an approach. This paper is the first to develop a method for counting realizations with provable approximation guarantee. In fact, we solve a slightly more general problem; besides the graphical degree sequence a small set of forbidden edges is also given. We show that for the general problem (which contains the Greenhill problem and the Miklós, Erdős and Soukup problem as special cases the derived MCMC process is rapidly mixing. Further, we show that this new problem is self-reducible therefore it provides a fully polynomial randomized approximation scheme (a.k.a. FPRAS for counting of all realizations.
Dehury, Ranjit Kumar; Chatterjee, Suhita Chopra
2016-01-01
Mainstreaming of AYUSH and revitalization of local health traditions is one of the innovative components of the National Rural Health Mission (NRHM) in the state of Odisha, India. In this study, an attempt was made to assess the potential of collocating AYUSH to improve maternal health services in tribal dominated Jaleswar block of the Balasore district. In addition, the study aimed at unearthing the underlying challenges and constraints in mainstreaming AYUSH and linking it with the Maternal Health Program. Review of the policy documents and guidelines, both central and state government, was made to assess the implementation of AYUSH in Odisha. Primary data were collected through interviews with AYUSH doctors, district and block level health administrators, and tribal women. The study revealed the inadequacy of basic amenities, infrastructure, drugs, and consumables in the health centers for integrating AYUSH in the delivery of maternal health services. Analysis of the job chart and work pattern of AYUSH doctors showed underutilization of their specialized knowledge to treat patients. Lack of continued medical education, standard operating procedures for treatment and spatial marginalization made suboptimal utilization of AYUSH services. This is unfortunate given the fact that such regions are economically underdeveloped and already have a distinct orientation toward indigenous health systems. AYUSH, on account of its holistic approach and proven cost-effectiveness, could be a viable option for improving maternal health in the region. The study concluded that although there is huge scope for integrating AYUSH in Maternal Health Program under the ongoing NRHM, the full potential is yet to be exploited. Copyright © 2016 Transdisciplinary University, Bangalore and World Ayurveda Foundation. Published by Elsevier B.V. All rights reserved.
PRAGMATIC TRANSFER IN REQUEST REALIZATIONS
Indawan Syahri
2007-01-01
Full Text Available This study investigates the pragmatic transfer in English request realizations made by EFL learners, i.e. the proficient learners. The subjects were students of an English Study Program who obtained TOEFL-like scores of at least 450. The data were collected by means of DCT-questionnaires and Role-plays. The results show that the subjects realize requests in the form of external modifications more frequently. Most of them embed their requests with supportive moves dominantly. They enfold the acts with the moves before, after or in both positions. Of the three positions, they mostly insert the moves initial position, i.e., through inductive patterns. This is due to pragmatic transfer.
Carbon. Examples of Property Realization
Kossko, I. A.; A.A. Onoprienko; Kossko, T.G.
2013-01-01
Examples of realization of carbon properties in formation of section near-surface boundaries defining the mechanism of oxidizing (normal) wear are presented. Synthesis of strengt hening diamond- lonsdaleite -carbene «frame» and graphite with function of solid lubricant on a friction surface in high-desperse carbon environment is reviewed. Prospects of carbon ap placation in implementation of the concept of electronics on one element, and also use of thin-film structures of amorphous carbon – ...
Experimental realization of quantum illumination.
Lopaeva, E D; Ruo Berchera, I; Degiovanni, I P; Olivares, S; Brida, G; Genovese, M
2013-04-12
We present the first experimental realization of the quantum illumination protocol proposed by Lloyd [Science 321, 1463 (2008)] and S. Tan et al. [Phys. Rev. Lett. 101, 253601 (2008)], achieved in a simple feasible experimental scheme based on photon-number correlations. A main achievement of our result is the demonstration of a strong robustness of the quantum protocol to noise and losses that challenges some widespread wisdom about quantum technologies.
M. De la Sen
2008-01-01
Full Text Available This paper investigates key aspects of realization and partial realization theories for linear time-invariant systems being subject to a set of incommensurate internal and external point delays. The results are obtained based on the use of formal Laurent expansions whose coefficients are polynomial matrices of appropriate orders and which are also appropriately related to truncated and infinite block Hankel matrices. The above-mentioned polynomial matrices arise in a natural way from the transcendent equations associated with the delayed dynamics. The results are linked to the properties of controllability and observability of dynamic systems. Some related overview is given related to robustness concerned with keeping the realization properties under mismatching between a current transfer matrix and a nominal one.
Carbon. Examples of Property Realization
I.A. Kossko
2013-11-01
Full Text Available Examples of realization of carbon properties in formation of section near-surface boundaries defining the mechanism of oxidizing (normal wear are presented. Synthesis of strengt hening diamond- lonsdaleite -carbene «frame» and graphite with function of solid lubricant on a friction surface in high-desperse carbon environment is reviewed. Prospects of carbon ap placation in implementation of the concept of electronics on one element, and also use of thin-film structures of amorphous carbon – metal for data recording are discussed.
PREFACE: Nanospintronics design and realization
Akai, Hisazumi; Katayama-Yoshida, Hiroshi; Kasai, Hideaki
2004-12-01
This special issue of Journal of Physics: Condensed Matter contains selected papers from the 1st International Conference on Nanospintronics Design and Realization (ICNDR 2004), which was held in Kyoto, Japan, 24--28 May 2004. This conference was organized by the Nanospintronics Design and Realization project members: Hideaki Kasai, Osaka (Chair of the Conference) Hisazumi Akai, Osaka Hajime Asahi, Osaka Wilson Agerico Diño, Osaka Hiroshi Harima, Kyoto Tomoyuki Kakeshita, Osaka Junjiro Kanamori, Kyoto Hiroshi Katayama-Yoshida, Osaka Koichi Kusakabe, Osaka Hiroshi Nakanishi, Osaka (Secretary) Tamio Oguchi, Hiroshima Teruo Ono, Osaka Naoshi Suzuki, Osaka Hitoshi Tabata, Osaka under the auspices of the Japan Ministry of Education, Culture, Sports, Science and Technology (MEXT) Special Coordination Funds for Promoting Science and Technology, and the sponsorship of Osaka University and the International Institute for Advanced Studies (IIAS). The conference is intended to provide an international forum for experimental and theoretical researchers, in the rapidly developing field of nanospintronics. It aims to: provide an overview of our current understanding of the physics of spin transport in (magnetic) semiconductors and hybrid magnetic/semiconductor structures; provide a venue to present and discuss the latest developments in using spin-dependent phenomena in nano-(opto-) electronics and computing applications; provide a venue for discussion and assessment of other possible means of exploiting the spin-dependent phenomena in future nano-(opto-) electronic and computing applications; address current (and foreseeable future) problems, of fundamental and applied nature, in an effort to bridge the physics and technology gap between semiconducting and magnetic materials. All of these being geared towards bringing about the realization of a functioning nanospintronics. A total of 127 delegates from 15 countries took part in ICNDR 2004, which was comprised of 62 invited
Design and Realization of Teaching Demonstration System Based on .Net
Ailian Wang
2013-04-01
Full Text Available In order to realize the systematic planning for teaching demonstration, this article proposed a teaching demonstration system based on .Net. The system adopted the techniques of Windows forms and serialization, Windows tree controls and the type and level of algorithm, component interface, advanced realization of windows graphics device interface, graphics drawing application programming interface, object link embedded, platform/assembly technology based on SOA, and was applied successfully in the development of the project, providing an effective method for informatization teaching.
FPGA realization of multi-scroll chaotic oscillators
Tlelo-Cuautle, E.; Rangel-Magdaleno, J. J.; Pano-Azucena, A. D.; Obeso-Rodelo, P. J.; Nunez-Perez, J. C.
2015-10-01
Chaotic oscillators have been realized using field-programmable gate arrays (FPGAs) showing good results. However, only 2-scrolls have been observed experimentally, and all reported works use commercially-available software tools for FPGA synthesis. In this manner, as a first contribution we show the FPGA realization of two multi-scroll chaotic oscillators that are characterized by their maximum Lyapunov exponent (MLE) for generating from 2- to 6-scrolls. The first multi-scroll chaotic oscillator is based on saturated function series and the second on Chua's circuit. As a second contribution, we show their hardware realization by applying two numerical methods: Forward Euler (FE) and Runge Kutta (RK). The advantage of realizing those multi-scroll chaotic oscillators is that one can avoid the use of multiplier entities, thus optimizing FPGA resources and increasing the processing speed, as we show by realizing single constant multiplication (SCM) blocks. The experiments are verified by performing co-simulation for an FPGA Spartan 3 of Xilinx. Finally, experimental results are shown for different values of MLE (already optimized) for both multi-scroll chaotic oscillators, and the FPGA used resources are listed for generating 6-scrolls when applying FE and RK.
Experimental Realization of a Reflective Optical Limiter
Vella, Jarrett H; Browning, Andrew T; Limberopoulos, Nicholaos I; Vitebskiy, Ilya; Makri, Eleana; Kottos, Tsampikos
2015-01-01
Optical limiters transmit low-intensity light, while blocking laser radiation with excessively high intensity or fluence. A typical passive optical limiter absorbs most of the high level radiation, which can cause irreversible damage. In this communication we report the first experimental realization of a reflective optical limiter, which does not absorb the high-level laser radiation, but rather reflects it back to space. The design is based on a periodic layered structure composed of alternating SiO2 and Si3N4 layers with a single GaAs defect layer in the middle. At low intensities, the layered structure displays a strong resonant transmission via the localized defect mode. At high intensities, the two-photon absorption in the GaAs layer suppresses the localized mode along with the resonant transmission, the entire layered structure turns highly reflective within a broad frequency range covering the entire photonic band gap of the periodic layered structure. By contrast, a stand-alone GaAs layer would absor...
Experimental Realization of a Reflective Optical Limiter
Vella, Jarrett H.; Goldsmith, John H.; Browning, Andrew T.; Limberopoulos, Nicholaos I.; Vitebskiy, Ilya; Makri, Eleana; Kottos, Tsampikos
2016-06-01
Optical limiters transmit low-intensity light, while blocking laser radiation with excessively high irradiance or fluence. A typical optical limiter involves a nonlinear material which is transparent at low light intensity and becomes opaque when the light intensity exceeds a certain level. Most of the high-level radiation is absorbed by the nonlinear material causing irreversible damage. This fundamental problem could be solved if the state of the nonlinear material changed from transparent to highly reflective (not absorptive) when the intensity becomes too high. None of the known nonlinear optical materials display such a property. A solution can be provided by a nonlinear photonic structure. In this communication, we report the experimental realization of a reflective optical limiter. The design is based on a planar microcavity composed of alternating SiO2 and Si3N4 layers with a single GaAs defect layer in the middle. At low intensity, the planar microcavity displays a strong resonant transmission via a cavity mode. As the intensity increases, two-photon absorption in GaAs kicks in, initially resulting in the microcavity-enhanced light absorption. A further increase in light intensity, though, suppresses the cavity mode along with the resonant transmission; the entire planar microcavity turns highly reflective within a broad frequency range covering the entire photonic band gap. This seemingly counterintuitive behavior is a general feature of resonant transmission via a cavity mode with purely nonlinear absorption.
On Realization of Technological productivity
SOILORW.
2000-01-01
Technology has been a major force in modem economic development and world economy, but technology is only potential productivity and has a long distance from real productive forces. There are two major paths in turning technology into real productive forces. First, technological innovation is a process in which technology is tranaformed into real productivity in essence . The market is another channel for transformation of technology into productive forces. The transformation of technology into productive forces has its laws and mechanisms. In China, there are many obstacles to transformation of technology into real productive forces. We must take seventeen pieces of countermeasures to overcome these obstacles, and speed up the realization of technological productive forces.
Dreams, Perception, and Creative Realization.
Glaskin, Katie
2015-10-01
This article draws on the ethnography of Aboriginal Australia to argue that perceptual openness, extending from waking life into dreaming experience, provides an important cognitive framework for the apprehension of dreamt experience in these contexts. I argue that this perceptual openness is analogous to the "openness to experience" described as a personality trait that had been linked with dream recall frequency (among other things). An implication of identifying perceptual openness at a cultural rather than at an individual level is two-fold. It provides an example of the ways in which cultural differences affect perception, indicative of cognitive diversity; and, given the relationship between dreams and creativity suggested anecdotally and through research, a cultural orientation toward perceptual openness is also likely to have implications for the realization of creativity that occurs through dreams. Such creativity though cannot be separated from the relational context in which such dreamt material is elaborated and understood.
Rashba realization: Raman with RF
Campbell, Daniel L
2015-01-01
We theoretically explore a Rashba spin-orbit coupling scheme which operates entirely in the absolute ground state manifold of an alkali atom, thereby minimizing all inelastic processes. An energy gap between ground eigenstates of the proposed coupling can be continuously opened or closed by modifying laser polarizations. Our technique uses far-detuned "Raman" laser coupling to create the Rashba potential, which has the benefit of low spontaneous emission rates. At these detunings, the Raman matrix elements that link $m_F$ magnetic sublevel quantum numbers separated by two are also suppressed. These matrix elements are necessary to produce the Rashba Hamiltonian within a single total angular momentum $f$ manifold. However, the far-detuned Raman couplings can link the three XYZ states familiar to quantum chemistry, which possess the necessary connectivity to realize the Rashba potential. We show that these XYZ states are essentially the hyperfine spin eigenstates of $^{87}\\text{Rb}$ dressed by a strong radio-fr...
汲旭生; 张丽梅; 穆安才; 马治
2012-01-01
介绍基于LPS的正射影像处理流程,以图文的形式描述区域网平差处理Spot-5卫星影像的具体过程,最后得到正射纠正影像,用于1∶50 000DOM生产。%The paper describes the processing of Spot 5 satellite images based on the Erdas Image 9.2 LPS by block adjustment with words and pictures whereby orthophoto rectification images are obtained finally for producing 1∶ 50 000 digital orthophoto maps.
A Realization Approach for Residual Expressions
Skovmose Kallesøe, Carsten; Izadi-Zamanabadi, Roozbeh; Wisniewski, Rafal
2006-01-01
This paper is concerned with state space realization of inherent redundant information in subsystems, which are identified by structural analysis (SA) approach. The identified subsystems are assumed to involve algebraic variables, representing unknown signals. The proposed realization method...
Why benefits realization from ERP in SMEs doesn't seem to matter?
Haddara, Moutaz; Päivärinta, Tero
2011-01-01
It is often argued that IT investments require active management practices for benefits realization. This applies also to enterprise resource planning (ERP) systems. As well, benefits realization efforts are assumed to create more value than they cost. Hence, the maturity of organizations should be increased and their cultures cultivated towards more rational benefits realization practices. Our study on ERP implementations in Egyptian medium-sized organizations, however, provides aberrant res...
Ultrasound guided supraclavicular block.
Hanumanthaiah, Deepak
2013-09-01
Ultrasound guided regional anaesthesia is becoming increasingly popular. The supraclavicular block has been transformed by ultrasound guidance into a potentially safe superficial block. We reviewed the techniques of performing supraclavicular block with special focus on ultrasound guidance.
The role of project manager in benefits realization management as a project constraint/driver
Amr Mossalam
2016-12-01
In summary, the results of this paper can be used to: enlarging the project manager responsibilities to acquire the benefits realization, giving a high level 6-step process for benefits management, suggesting a mechanism for managing these benefits through benefits register, benefits realization plan, measures and KPIs and closure business case.
Rashba realization: Raman with RF
Campbell, D L; Spielman, I B
2016-01-01
We theoretically explore a Rashba spin–orbit coupling scheme which operates entirely in the absolute ground state manifold of an alkali atom, thereby minimizing all inelastic processes. An energy gap between ground eigenstates of the proposed coupling can be continuously opened or closed by modifying laser polarizations. Our technique uses far-detuned ‘Raman’ laser coupling to create the Rashba potential, which has the benefit of low spontaneous emission rates. At these detunings, the Raman matrix elements that link mF magnetic sublevel quantum numbers separated by two are also suppressed. These matrix elements are necessary to produce the Rashba Hamiltonian within a single total angular momentum f manifold. However, the far-detuned Raman couplings can link the three XYZ states familiar to quantum chemistry, which possess the necessary connectivity to realize the Rashba potential. We show that these XYZ states are essentially the hyperfine spin eigenstates of 87Rb dressed by a strong radio-frequency magnetic field. PMID:27524933
Neutrino factories: realization and physics potential
Geer, S.; /Fermilab; Zisman, M.S.; /LBL, Berkeley
2006-12-01
Neutrino Factories offer an exciting option for the long-term neutrino physics program. This new type of neutrino facility will provide beams with unique properties. Low systematic uncertainties at a Neutrino Factory, together with a unique and precisely known neutrino flavor content, will enable neutrino oscillation measurements to be made with unprecedented sensitivity and precision. Over recent years, the resulting neutrino factory physics potential has been discussed extensively in the literature. In addition, over the last six years the R&D necessary to realize a Neutrino Factory has been progressing, and has developed into a significant international activity. It is expected that, within about five more years, the initial phase of this R&D program will be complete and, if the community chooses to build this new type of neutrino source within the following decade, neutrino factory technology will be ready for the final R&D phase prior to construction. In this paper (1) an overview is given of the technical ingredients needed for a Neutrino Factory, (2) beam properties are described, (3) the resulting neutrino oscillation physics potential is summarized, (4) a more detailed description is given for one representative Neutrino Factory design, and (5) the ongoing R&D program is summarized, and future plans briefly described.
Classical realizability in the CPS target language
Frey, Jonas
2016-01-01
Motivated by considerations about Krivine's classical realizability, we introduce a term calculus for an intuitionistic logic with record types, which we call the CPS target language. We give a reformulation of the constructions of classical realizability in this language, using the categorical...... techniques of realizability triposes and toposes. We argue that the presentation of classical realizability in the CPS target language simplifies calculations in realizability toposes, in particular it admits a nice presentation of conjunction as intersection type which is inspired by Girard's ludics....
FPGA realization of Farrow structure for sampling rate change
Marković Bogdan
2016-01-01
Full Text Available In numerous implementations of modern telecommunications and digital audio systems there is a need for sampling rate change of the system input signal. When the relation between signal input and output sampling frequencies is a fraction of two large integer numbers, Lagrange interpolation based on Farrow structure can be used for the efficient realization of the resample block. This paper highlights efficient realization and estimation of necessary resources for polynomial cubic Lagrange interpolation in the case of the demand for the signal sampling rate change with the factor 160/147 on Field-Programmable Gate Array architecture (FPGA. [Projekat Ministarstva nauke Republike Srbije, br. TR-32023 i br. TR-32028
Learning, Realizability and Games in Classical Arithmetic
Aschieri, Federico
2010-01-01
In this dissertation we provide mathematical evidence that the concept of learning can be used to give a new and intuitive computational semantics of classical proofs in various fragments of Predicative Arithmetic. First, we extend Kreisel modified realizability to a classical fragment of first order Arithmetic, Heyting Arithmetic plus EM1 (Excluded middle axiom restricted to Sigma^0_1 formulas). We introduce a new realizability semantics we call "Interactive Learning-Based Realizability". Our realizers are self-correcting programs, which learn from their errors and evolve through time. Secondly, we extend the class of learning based realizers to a classical version PCFclass of PCF and, then, compare the resulting notion of realizability with Coquand game semantics and prove a full soundness and completeness result. In particular, we show there is a one-to-one correspondence between realizers and recursive winning strategies in the 1-Backtracking version of Tarski games. Third, we provide a complete and fully...
Natalia N. Samokhina
2013-01-01
Full Text Available This article introduces the project of educational system content of professional and creative self-realization of future teachers of music, defined by cognitive, practically-pragmatist, person-motivated and socially-oriented educational blocks. The functioning of the selected blocks is realized by means of knowledge, abilities, skills, as well as ideological, moral and aesthetic ideas of the future specialists
王丹丹; 徐越; 宋怀波; 何东健; 张海辉
2015-01-01
Overlapped apples are common in natural scenes, and they can seriously affect the execution of picking task. Accurate segmentation of overlapped apples is one of the key problems that picking robot must solve. As the existing overlapped apples segmentation methods could not retain the contour of overlapped parts, a new method of segmenting overlapped apples was proposed in this paper. The steps of the algorithm were as follows: Firstly, the image was processed with morphological opening operation using disk-shaped structural element with the radius of 5 pixels so as to ensure the data information consistent in small area and to make the image more smooth. In order to distinguish the target and the background automatically, the image was then transformed from RGB color space into L*a*b color space. ThenK-means clustering method was used to segment images to extract apple region. Secondly, in order to extract accurate and entire contour of apple region and keep the contour of overlapped part simultaneously, Normalized Cut (Ncut) method was adopted. To ensure the accuracy of Ncut algorithm, the cluster number was chosen as 5. Thirdly, contour segmentation method was used to extract contour of each apple. The procedures of contour segmentation method were as follows: 1) The extracted contours were connected by simply using eroding operation in order to avoid disconnection at intersection of contours of 2 adjacent apples; 2) Refine the connected contour and search three cross point, then break off the contour at three cross point by assigning zero at three cross point, and 3 contours could be got; 3) Add the 2 contours whose bending directions were opposite, and this was the contour of unblocked apple and the other contour was the contour of blocked apple. Lastly, Spline interpolation method was used to reconstruct the contour of blocked apples. In order to verify the validity of this algorithm, 20 images of adjacent apples were used to conduct the experiment, and the
Active Block Layout: A High Performance Block Layout Mechanism%Active Block Layout:一种高性能磁盘布局机制
卢军; 卢显良; 罗光春; 韩宏; 魏青松
2003-01-01
The access frequency of different files in file system is dissimilar. If file system can optimize the block lay-out of these hot files which are frequently accessed,the performance of file system will be improved. This paper pre-sents a high performance block layout mechanism: Active Block Layout (ABL). ABL can record the access frequencyof every file in file system and actively optimize the block layout of these hot files by block duplicating. The duplicatedblocks can be placed in the special zone of track,which is called "Cooling Zone". ABL can automatically determine theplacing position and the copy count of the blocks which need to be duplicated. In order to reduce the overhead of blockduplication,this paper also presents a mechanism which uses the potential disk bandwidth to realize the block duplica-tion,and does not obviously degrade the performance of file system.
Functionalization of Block Copolymer Vesicle Surfaces
Wolfgang Meier
2011-01-01
Full Text Available In dilute aqueous solutions certain amphiphilic block copolymers self-assemble into vesicles that enclose a small pool of water with a membrane. Such polymersomes have promising applications ranging from targeted drug-delivery devices, to biosensors, and nanoreactors. Interactions between block copolymer membranes and their surroundings are important factors that determine their potential biomedical applications. Such interactions are influenced predominantly by the membrane surface. We review methods to functionalize block copolymer vesicle surfaces by chemical means with ligands such as antibodies, adhesion moieties, enzymes, carbohydrates and fluorophores. Furthermore, surface-functionalization can be achieved by self-assembly of polymers that carry ligands at their chain ends or in their hydrophilic blocks. While this review focuses on the strategies to functionalize vesicle surfaces, the applications realized by, and envisioned for, such functional polymersomes are also highlighted.
Electronic circuit realization of the logistic map
Madhekar Suneel
2006-02-01
An electronic circuit realization of the logistic difference equation is presented using analog electronics. The behaviour of the realized system is evaluated against computer simulations of the same. The circuit is found to exhibit the entire range of dynamics of the logistic equation: ﬁxed points, periodicity, period doubling, chaos and intermittency. Quantitative measurements of the dynamics of the realized system are presented and are found to be in good agreement with the theoretical values. Some possible applications of such a realization are brieﬂy discussed.
D. Letić
2013-01-01
Full Text Available The development and implementation of the computer methods at project managing in the part of the planning of designing and installation of mechanical elements with the fit (assembly block of the gear speed reducer is significant and at present irreplaceable engineering task if it has been realized by the modern parameter technology. There are multifunction uses of this organized group of activities, beginning from the quick changeability of elements still in the phase of designing and constructing, thanks to the characteristics of their associativity, still to the wide basis of standard elements that are incorporated in the very program package. Meanwhile, these activities are not simple, so their realization has to be planned from the stand - point of time, resource and cost of realization. For the very designing and constructing was used AutoCAD Mechanical, and for the design managing Microsoft Project.
Interactive Poster: Exploring Block Access Patterns of Native XML Storage
Janetzko, Halldór; Keim, Daniel A.; Kramis, Marc; Mansmann, Florian; Waldvogel, Marcel
2006-01-01
Recent block-based native XML storage systems such as IDEFIX touch blocks according to the XQuery engine s execution plan. The resulting access patterns are virtually unknown and potentially cause many expensive disk seeks. Visualization comes to the rescue when extensive log files must be analyzed a tedious and difficult task. The dynamic time-based block-touch animation as well as the static block-type information of VISUAL IDEFIX foster the insight into the performance-critical internals...
New technology to realize printed radiating elements
Tarot, A. C.; Sharaiha, A.; Terret, C.; Garnier, Y.
1995-05-01
A plating process for low-cost dielectric substrates (like polypropylene or foam) has been developed by the CNET (Centre National d'Etudes des Telecommunications) in collaboration with LAM (Laboratoire Antennes et Microelectronique). This process allows the realization of printed radiating elements like microstrip antennas. An example of a multilayered printed antenna realized with this technology is presented with its performance.
Hardware realizations of arithmetic with complex integer numbers on PLD-base
Opanasenko V. N.
2008-10-01
Full Text Available Hardware realizations of arithmetic with complex integer numbers were proposed. The generators of sine and cosine with different frequency were used to make behavior stand. Real verification was made by block Spartan–3–400 Evaluation Kit, which connect up PCI of personal computer.
Total Spinal Block after Thoracic Paravertebral Block.
Beyaz, Serbülent Gökhan; Özocak, Hande; Ergönenç, Tolga; Erdem, Ali Fuat; Palabıyık, Onur
2014-02-01
Thoracic paravertebral block (TPVB) can be performed with or without general anaesthesia for various surgical procedures. TPVB is a popular anaesthetic technique due to its low side effect profile and high analgesic potency. We used 20 mL of 0.5% levobupivacaine for a single injection of unilateral TPVB at the T7 level with neurostimulator in a 63 year old patient with co-morbid disease who underwent cholecystectomy. Following the application patient lost consciousness, and was intubated. Haemodynamic instability was normalised with rapid volume replacement and vasopressors. Anaesthetic drugs were stopped at the end of the surgery and muscle relaxant was antagonised. Return of mucle strenght was shown with neuromuscular block monitoring. Approximately three hours after TPVB, spontaneous breathing started and consciousness returned. A total spinal block is a rare and life-threatening complication. A total spinal block is a complication of spinal anaesthesia, and it can also occur after peripheral blocks. Clinical presentation is characterised by hypotension, bradicardia, apnea, and cardiac arrest. An early diagnosis and appropriate treatment is life saving. In this case report, we want to present total spinal block after TPVB.
Chaotic block iterating method for pseudo-random sequence generator
CHEN Shuai; ZHONG Xian-xin
2007-01-01
A pseudo-random sequence generator is a basic tool for cryptography. To realize a pseudo-random sequence generator, a new block iterating method using shifter, multiplier,and adder operations has been introduced. By increasing the iteration of the counter and by performing calculations based on the initial value, an approximate pseudo-random sequence was obtained after exchanging bits. The algorithm and the complexity of the generator were introduced. The result obtained from the calculation shows that the self-correlation of the "m" block sequence is two-valued; the block field value is [0,2m - 1 ], and the block period is 2m+8 - 1.
Ontological Models to Support Planning Operations Project
National Aeronautics and Space Administration — Automation and autonomy technologies, such as automated planning software, are key elements in realizing the vision for space exploration. A fundamental requirement...
Ontological Models to Support Planning Operations Project
National Aeronautics and Space Administration — Automation and autonomy technologies, such as automated planning software, are key elements in realizing the vision for space exploration. However, the major...
The economic value of realized volatility
Christoffersen, Peter; Feunou, Bruno; Jacobs, Kris
2014-01-01
Many studies have documented that daily realized volatility estimates based on intraday returns provide volatility forecasts that are superior to forecasts constructed from daily returns only. We investigate whether these forecasting improvements translate into economic value added. To do so, we...... develop a new class of affine discrete-time option valuation models that use daily returns as well as realized volatility. We derive convenient closed-form option valuation formulas, and we assess the option valuation properties using Standard & Poor’s (S&P) 500 return and option data. We find...... that realized volatility reduces the pricing errors of the benchmark model significantly across moneyness, maturity, and volatility levels....
Experimental realization of nonadiabatic holonomic quantum computation.
Feng, Guanru; Xu, Guofu; Long, Guilu
2013-05-10
Because of its geometric nature, holonomic quantum computation is fault tolerant against certain types of control errors. Although proposed more than a decade ago, the experimental realization of holonomic quantum computation is still an open challenge. In this Letter, we report the first experimental demonstration of nonadiabatic holonomic quantum computation in a liquid NMR quantum information processor. Two noncommuting one-qubit holonomic gates, rotations about x and z axes, and the two-qubit holonomic CNOT gate are realized by evolving the work qubits and an ancillary qubit nonadiabatically. The successful realizations of these universal elementary gates in nonadiabatic holonomic quantum computation demonstrates the experimental feasibility of this quantum computing paradigm.
Jönsson, Jeppe
2015-01-01
Block tearing is considered in several codes as a pure block tension or a pure block shear failure mechanism. However in many situations the load acts eccentrically and involves the transfer of a substantial moment in combination with the shear force and perhaps a normal force. A literature study...... yield lines around the block leads to simple interaction formulas similar to other interaction formulas in the codes.......Block tearing is considered in several codes as a pure block tension or a pure block shear failure mechanism. However in many situations the load acts eccentrically and involves the transfer of a substantial moment in combination with the shear force and perhaps a normal force. A literature study...
Fan Weiqing
2011-01-01
@@ Tax planning is legal planning activities for tax savings, meaning tax payers make operation plans within the national policy framework and choose operation programs favorable to tax savings.Along with a maturing socialist market economy system in China, tax planning is becoming an integral part of enterprise management and operation.For a better tax planning, enterprises have to fully understand the meaning, get proficient at relevant strategies, and apply these methods to save taxes and realize the maximization of enterprise value while considering the actual situation.
Hamiltonian realizations of nonlinear adjoint operators
Fujimoto, Kenji; Scherpen, Jacquelien M.A.; Gray, W. Steven
2002-01-01
This paper addresses the issue of state-space realizations for nonlinear adjoint operators. In particular, the relationships between nonlinear Hilbert adjoint operators, Hamiltonian extensions and port-controlled Hamiltonian systems are established. Then, characterizations of the adjoints of control
Hamiltonian Realizations of Nonlinear Adjoint Operators
Fujimoto, Kenji; Scherpen, Jacquelien M.A.; Gray, W. Steven
2000-01-01
This paper addresses state-space realizations for nonlinear adjoint operators. In particular the relationship among nonlinear Hilbert adjoint operators, Hamiltonian extensions and port-controlled Hamiltonian systems are clarified. The characterization of controllability, observability and Hankel ope
Modelling and Forecasting Multivariate Realized Volatility
Halbleib, Roxana; Voev, Valeri
2011-01-01
This paper proposes a methodology for dynamic modelling and forecasting of realized covariance matrices based on fractionally integrated processes. The approach allows for flexible dependence patterns and automatically guarantees positive definiteness of the forecast. We provide an empirical appl...
BLOCK H-MATRICES AND SPECTRUM OF BLOCK MATRICES
黄廷祝; 黎稳
2002-01-01
The block H-matrices are studied by the concept of G-functions, several concepts of block matrices are introduced. Equivalent characters of block H-matrices are obtained. Spectrum localizations claracterized by Gfunctions for block matrices are got.
Interpreting a Classical Geometric Proof with Interactive Realizability
Giovanni Birolo
2013-09-01
Full Text Available We show how to extract a monotonic learning algorithm from a classical proof of a geometric statement by interpreting the proof by means of interactive realizability, a realizability sematics for classical logic. The statement is about the existence of a convex angle including a finite collections of points in the real plane and it is related to the existence of a convex hull. We define real numbers as Cauchy sequences of rational numbers, therefore equality and ordering are not decidable. While the proof looks superficially constructive, it employs classical reasoning to handle undecidable comparisons between real numbers, making the underlying algorithm non-effective. The interactive realizability interpretation transforms the non-effective linear algorithm described by the proof into an effective one that uses backtracking to learn from its mistakes. The effective algorithm exhibits a "smart" behavior, performing comparisons only up to the precision required to prove the final statement. This behavior is not explicitly planned but arises from the interactive interpretation of comparisons between Cauchy sequences.
Lesson Thirteen Trifascicular Block
鲁端; 王劲
2005-01-01
@@ A complete trifascicular block would result in complete AV block. The idio ventricular rhythm has a slower rate and a wide QRS complex because the pacemaker is located at the peripheral part of the conduction system distal to the sites of the block1. Such a rhythm may be difficult to differentiate from bifascicular or bundle branch block combined with complete block at a higher level such as the AV node or His bundle2. Besides a slower ventricular rate, a change in the morphology of the QRS complex from a previous known bifascicular pattern would be strongly suggestive of a trifascicular origin of the complete AV block3. A His bundle recording is required for a definitive diagnosis, however.
A version management model of PDM system and its realization
ZHONG Shi-sheng; LI Tao
2008-01-01
Based on the key function of version management in PDM system, this paper discusses the function and the realization of version management and the transitions of version states with a workflow. A directed acy-clic graph is used to describe a version model. Three storage modes of the directed acyclic graph version model in the database, the bumping block and the PDM working memory are presented and the conversion principle of these three modes is given. The study indicates that building a dynamic product structure configuration model based on versions is the key to resolve the problem. Thus a version model of single product object is built. Then the version management model in product structure configuration is built and the apphcation of version manage-ment of PDM syste' is presented as a case.
Bosonic models with Fermi-liquid kinematics: realizations and properties
Goldbart, Paul; Gopalakrishnan, Sarang; Lamacraft, Austen
2011-03-01
We consider models of interacting bosons in which the single-particle kinetic energy achieves its minimum on a surface in momentum space. The kinematics of such models resembles that resulting from Pauli blocking in Fermi liquids; therefore, Shankar's renormalization-group treatment of Fermi liquids can be adapted to investigate phase transitions in these bosonic systems. We explore possible experimental realizations of such models in cold atomic gases: e.g., via spin-orbit coupling, multimode-cavity-mediated interactions, and Cooper pairing of Fermi gases in spin-dependent lattices. We address the phase structure and critical behavior of the resulting models within the framework of Ref., focusing in particular on Bose-Einstein condensation and on quantum versions of the Brazovskii transition from a superfluid to a supersolid.
Performance optimization of queueing systems with perturbation realization
Xia, Li
2012-04-01
After the intensive studies of queueing theory in the past decades, many excellent results in performance analysis have been obtained, and successful examples abound. However, exploring special features of queueing systems directly in performance optimization still seems to be a territory not very well cultivated. Recent progresses of perturbation analysis (PA) and sensitivity-based optimization provide a new perspective of performance optimization of queueing systems. PA utilizes the structural information of queueing systems to efficiently extract the performance sensitivity information from a sample path of system. This paper gives a brief review of PA and performance optimization of queueing systems, focusing on a fundamental concept called perturbation realization factors, which captures the special dynamic feature of a queueing system. With the perturbation realization factors as building blocks, the performance derivative formula and performance difference formula can be obtained. With performance derivatives, gradient-based optimization can be derived, while with performance difference, policy iteration and optimality equations can be derived. These two fundamental formulas provide a foundation for performance optimization of queueing systems from a sensitivity-based point of view. We hope this survey may provide some inspirations on this promising research topic. © 2011 Elsevier B.V. All rights reserved.
Realized GARCH: A Complete Model of Returns and Realized Measures of Volatility
Hansen, Peter Reinhard; Huang, Zhuo (Albert); Shek, Howard Howan
of the classical GARCH framework; it implies an ARMA structure for the conditional variance and realized measures of volatility; and models in this class are parsimonious and simple to estimate. A key feature of the Realized GARCH framework is a measurement equation that relates the observed realized measure...... to latent volatility. This equation facilitates a simple modeling of the dependence between returns and future volatility that is commonly referred to as the leverage effect. An empirical application with DJIA stocks and an exchange traded index fund shows that a simple Realized GARCH structure leads...
... Blocked Urethral Valves Health Issues Listen Español Text Size Email Print Share Blocked Urethral Valves Page Content Article Body Urine leaves the bladder through a tube called the urethra, which in boys passes through the penis. Rarely, small membranes form across the urethra in ...
Van der Vegt, Wim
2010-01-01
Related Drupal Nodes Block This module exposes a block that uses Latent Semantic Analysis (Lsa) internally to suggest three nodes that are relevant to the node a user is viewing. This module performs three tasks. 1) It periodically indexes a Drupal site and generates a Lsa Term Document Matrix. Inde
... P wave as it normally would. If an electrical signal is blocked before it reaches the ventricles, they won't contract and pump blood to the lungs and the rest of the body. Second-degree heart block is divided into two ...
Van der Vegt, Wim
2010-01-01
Related Drupal Nodes Block This module exposes a block that uses Latent Semantic Analysis (Lsa) internally to suggest three nodes that are relevant to the node a user is viewing. This module performs three tasks. 1) It periodically indexes a Drupal site and generates a Lsa Term Document Matrix. Inde
Enablers & Barriers for Realizing Modularity Benefits
Storbjerg, Simon Haahr; Brunø, Thomas Ditlev; Thyssen, Jesper
2012-01-01
Although modularization is becoming both a well-described domain in academia and a broadly applied concept in business, many of today’s firm still struggle to realize the promised benefits of this approach. Managing modularization is a complex matter, and in spite of this, a topic that has received...... are the organizational and systems related aspects. Recognizing the need for guidance to realize the benefits of modularity, the purpose of this study is through a literature study and a case study to improve the insight into the organizational and systems related enablers and barriers with regard to obtaining the full...
Paradigms for Realizing Machine Learning Algorithms.
Agneeswaran, Vijay Srinivas; Tonpay, Pranay; Tiwary, Jayati
2013-12-01
The article explains the three generations of machine learning algorithms-with all three trying to operate on big data. The first generation tools are SAS, SPSS, etc., while second generation realizations include Mahout and RapidMiner (that work over Hadoop), and the third generation paradigms include Spark and GraphLab, among others. The essence of the article is that for a number of machine learning algorithms, it is important to look beyond the Hadoop's Map-Reduce paradigm in order to make them work on big data. A number of promising contenders have emerged in the third generation that can be exploited to realize deep analytics on big data.
Arrighi, Pablo
2010-01-01
We define the block neighborhood of a reversible CA, which is related both to its decomposition into a product of block permutations and to quantum computing. We give a purely combinatorial characterization of the block neighborhood, which helps in two ways. First, it makes the computation of the block neighborhood of a given CA relatively easy. Second, it allows us to derive upper bounds on the block neighborhood: for a single CA as function of the classical and inverse neighborhoods, and for the composition of several CAs. One consequence of that is a characterization of a class of "elementary" CAs that cannot be written as the composition of two simpler parts whose neighborhoods and inverse neighborhoods would be reduced by one half.
Kahriman Emina
2008-01-01
Full Text Available Paper discuss specific features of internet plan as well as planning as management process in general in the contemporary environment. No need to stress out that marketing plan and marketing planning is core activity in approaching to market. At the same time, there are a lot specific c request in preparing marketing plan comparing to business planning due to marketing plan is an essential part. The importance of internet plan and planning rely on specific features of the internet network but as a part of general corporate as well as marketing strategy.
On the Nonuniqueness of Balanced Nonlinear Realizations
Gray, W. Steven; Scherpen, Jacquelien M.A.
1999-01-01
The notion of balanced realizations for nonlinear state space model reduction problems was first introduced by Scherpen in 1993. Analogous to'the linear case, the so called singular value functions of a system describe the relative importance of each state component from an input-output point of vie
FPGA Realization of Memory 10 Viterbi Decoder
Paaske, Erik; Bach, Thomas Bo; Andersen, Jakob Dahl
1997-01-01
sequence mode when feedback from the Reed-Solomon decoder is available. The Viterbi decoder is realized using two Altera FLEX 10K50 FPGA's. The overall operating speed is 30 kbit/s, and since up to three iterations are performed for each frame and only one decoder is used, the operating speed...
The economic value of realized volatility
Christoffersen, Peter; Feunou, Bruno; Jacobs, Kris
2014-01-01
develop a new class of affine discrete-time option valuation models that use daily returns as well as realized volatility. We derive convenient closed-form option valuation formulas, and we assess the option valuation properties using Standard & Poor’s (S&P) 500 return and option data. We find...
Realization of Wavelet Transform Using SAW Devices
无
2001-01-01
Based on the characteristics of surface acoustic wave(SAW) devices, the theory for realizing wavelet transform (WT) by SAW is deduced. Simulated experiment shows that the method of implementing WT using SAW devices has virtues of high speed and utility and is compatible with digital technique. It is important to implement wavelet transform.
Enablers & Barriers for Realizing Modularity Benefits
Storbjerg, Simon Haahr; Brunø, Thomas Ditlev; Thyssen, Jesper
2012-01-01
are the organizational and systems related aspects. Recognizing the need for guidance to realize the benefits of modularity, the purpose of this study is through a literature study and a case study to improve the insight into the organizational and systems related enablers and barriers with regard to obtaining the full...
Realizability of stationary spherically symmetric transonic accretion
Ray, A K; Ray, Arnab K.
2002-01-01
The spherically symmetric stationary transonic (Bondi) flow is considered a classic example of an accretion flow. This flow, however, is along a separatrix, which is usually not physically realizable. We demonstrate, using a pedagogical example, that it is the dynamics which selects the transonic flow.
Measuring volatility with the realized range
M.P.E. Martens (Martin); D.J.C. van Dijk (Dick)
2006-01-01
textabstractRealized variance, being the summation of squared intra-day returns, has quickly gained popularity as a measure of daily volatility. Following Parkinson (1980) we replace each squared intra-day return by the high-low range for that period to create a novel and more efficient estimator
On Expectations, Realizations and Partial Retirement
Mastrogiacomo, Mauro
2004-01-01
This study investigates whether many people fear an unexpectedshock in their financial situation around retirement and whether therelated expectations and realizations match each other. We use theDutch Social Economic Panel survey data, where expectations aboutthe next year's financial situation are
ROLE OF INTERNET IN INSURANCE SERVICES REALIZATION
N. Prikazyuk
2014-03-01
Full Text Available The role of the Internet in the implementation of insurance products is investigated. It is founded the Internet in insurance performs presentable and realizable function. The benefits of using Internet technologies for business of insurance market are determined.
Realization-Based System Identification with Applications
Miller, Daniel N.
The identification of dynamic system behavior from experimentally measured or computationally simulated data is fundamental to the fields of control system design, modal analysis, and defect detection. In this dissertation, methods for system identification are developed based on classical linear system realization theory. The common methods of state-space realization from a measured, discrete-time impulse response are generalized to the following additional types of experiments: measured step responses, arbitrary sets of input-output data, and estimated cross-covariance functions of input-output data. The methods are particularly well suited to systems with large input and/or output dimension, for which classical system identification methods based on maximum likelihood estimation may fail due to their reliance on non-convex optimizations. The realization-based methods by themselves require a finite number of linear algebraic operations. Because these methods implicitly optimize cost functions that are linear in state-space parameters, they may be augmented with convex constraints to form convex optimization problems. Several common behavioral constraints are translated into eigenvalue constraints stated as linear matrix inequalities, and the realization-based methods are converted into semidefinite programming problems. Some additional constraints on transient and steady-state behavior are derived and incorporated into a quadratic program, which is solved following the semidefinite program. The newly developed realization-based methods are applied to two experiments: the aeroelastic response of a fighter aircraft and the transient thermal behavior of a light-emitting diode. The algorithms for each experiment are implemented in two freely available software packages.
Planning additional drilling campaign using two-space genetic algorithm: A game theoretical approach
Kumral, Mustafa; Ozer, Umit
2013-03-01
Grade and tonnage are the most important technical uncertainties in mining ventures because of the use of estimations/simulations, which are mostly generated from drill data. Open pit mines are planned and designed on the basis of the blocks representing the entire orebody. Each block has different estimation/simulation variance reflecting uncertainty to some extent. The estimation/simulation realizations are submitted to mine production scheduling process. However, the use of a block model with varying estimation/simulation variances will lead to serious risk in the scheduling. In the medium of multiple simulations, the dispersion variances of blocks can be thought to regard technical uncertainties. However, the dispersion variance cannot handle uncertainty associated with varying estimation/simulation variances of blocks. This paper proposes an approach that generates the configuration of the best additional drilling campaign to generate more homogenous estimation/simulation variances of blocks. In other words, the objective is to find the best drilling configuration in such a way as to minimize grade uncertainty under budget constraint. Uncertainty measure of the optimization process in this paper is interpolation variance, which considers data locations and grades. The problem is expressed as a minmax problem, which focuses on finding the best worst-case performance i.e., minimizing interpolation variance of the block generating maximum interpolation variance. Since the optimization model requires computing the interpolation variances of blocks being simulated/estimated in each iteration, the problem cannot be solved by standard optimization tools. This motivates to use two-space genetic algorithm (GA) approach to solve the problem. The technique has two spaces: feasible drill hole configuration with minimization of interpolation variance and drill hole simulations with maximization of interpolation variance. Two-space interacts to find a minmax solution
Block copolymer battery separator
Wong, David; Balsara, Nitash Pervez
2016-04-26
The invention herein described is the use of a block copolymer/homopolymer blend for creating nanoporous materials for transport applications. Specifically, this is demonstrated by using the block copolymer poly(styrene-block-ethylene-block-styrene) (SES) and blending it with homopolymer polystyrene (PS). After blending the polymers, a film is cast, and the film is submerged in tetrahydrofuran, which removes the PS. This creates a nanoporous polymer film, whereby the holes are lined with PS. Control of morphology of the system is achieved by manipulating the amount of PS added and the relative size of the PS added. The porous nature of these films was demonstrated by measuring the ionic conductivity in a traditional battery electrolyte, 1M LiPF.sub.6 in EC/DEC (1:1 v/v) using AC impedance spectroscopy and comparing these results to commercially available battery separators.
U.S. Environmental Protection Agency — This data layer represents Census 2000 demographic data derived from the PL94-171 redistricting files and SF3. Census geographic entities include blocks, blockgroups...
Stern, Margaret
1987-01-01
Extracts from "Experimenting with Numbers" by Margaret Stern demonstrate the use of Stern Blocks to develop the conceptual base on which learning disabled students can build further mathematical skills. (DB)
Steroidal neuromuscular blocking agents
Wierda, JMKH; Mori, K; Ohmura, A; Toyooka, H; Hatano, Y; Shingu, K; Fukuda, K
1998-01-01
Since 1964 approximately 20 steroidal neuromuscular blocking agents have been evaluated clinically. Pancuronium, a bisquaternary compound designed on the drawingboard, was the first steroidal relaxant introduced into clinical practice worldwide in the 1970's. Although a major improvement, pancuroniu
Block copolymer battery separator
Wong, David; Balsara, Nitash Pervez
2016-04-26
The invention herein described is the use of a block copolymer/homopolymer blend for creating nanoporous materials for transport applications. Specifically, this is demonstrated by using the block copolymer poly(styrene-block-ethylene-block-styrene) (SES) and blending it with homopolymer polystyrene (PS). After blending the polymers, a film is cast, and the film is submerged in tetrahydrofuran, which removes the PS. This creates a nanoporous polymer film, whereby the holes are lined with PS. Control of morphology of the system is achieved by manipulating the amount of PS added and the relative size of the PS added. The porous nature of these films was demonstrated by measuring the ionic conductivity in a traditional battery electrolyte, 1M LiPF.sub.6 in EC/DEC (1:1 v/v) using AC impedance spectroscopy and comparing these results to commercially available battery separators.
Recipient block TMA technique.
Mirlacher, Martina; Simon, Ronald
2010-01-01
New high-throughput screening technologies have led to the identification of hundreds of genes with a potential role in cancer or other diseases. One way to prioritize the leads obtained in such studies is to analyze a large number of tissues for candidate gene expression. The TMA methodology is now an established and frequently used tool for high-throughput tissue analysis. The recipient block technology is the "classical" method of TMA making. In this method, minute cylindrical tissue punches typically measuring 0.6 mm in diameter are removed from donor tissue blocks and are transferred into empty "recipient" paraffin blocks. Up to 1,000 different tissues can be analyzed in one TMA block. The equipment is affordable and easy to use in places where basic skills in histology are available.
Superalloy Lattice Block Structures
Nathal, M. V.; Whittenberger, J. D.; Hebsur, M. G.; Kantzos, P. T.; Krause, D. L.
2004-01-01
Initial investigations of investment cast superalloy lattice block suggest that this technology will yield a low cost approach to utilize the high temperature strength and environmental resistance of superalloys in lightweight, damage tolerant structural configurations. Work to date has demonstrated that relatively large superalloy lattice block panels can be successfully investment cast from both IN-718 and Mar-M247. These castings exhibited mechanical properties consistent with the strength of the same superalloys measured from more conventional castings. The lattice block structure also accommodates significant deformation without failure, and is defect tolerant in fatigue. The potential of lattice block structures opens new opportunities for the use of superalloys in future generations of aircraft applications that demand strength and environmental resistance at elevated temperatures along with low weight.
Miolane, Charlotte Vikkelsø
ensurethat no attack violatesthe securitybounds specifiedbygeneric attack namely exhaustivekey search and table lookup attacks. This thesis contains a general introduction to cryptography with focus on block ciphers and important block cipher designs, in particular the Advanced Encryption Standard...... by an analytic and systematic approach that allows insight to the techniques. Moreover a new procedure of generating and applying probabilistic equations in algebraic attacks on block cipher is proposed and examined. Also, we present practical results, which to our knowledge are the best algebraic results...... on small scale variants of AES. In the final part of the thesis we present a new block cipher proposal Present and examine its security against algebraic and differential cryptanalysis in particular....
Adductor canal block can result in motor block of the quadriceps muscle.
Chen, Junping; Lesser, Jonathan B; Hadzic, Admir; Reiss, Wojciech; Resta-Flarer, Francesco
2014-01-01
The block of nerves in the adductor canal is considered to cause a sensory block without a motor component. In this report, we describe a case of significant quadriceps muscle weakness after an adductor canal block (ACB). A 65-year-old female patient for ambulatory knee surgery was given an ACB for postoperative pain management. The block was performed under ultrasound guidance at the midthigh level using the transsartorial approach. Twenty milliliters of 0.5% ropivacaine was deposited adjacent to the anterior and posterior areas of the femoral artery. On discharge from the hospital, the patient realized that her thigh muscles were weak and she was unable to extend her leg at the knee. A neuromuscular examination indicated that the patient had no strength in her quadriceps muscle, along with sensory deficit in the medial-anterior lower leg and area in front of knee up to the midthigh. The weakness lasted 20 hours, and the sensory block lasted 48 hours before complete recovery. The optimal level and amount of local anesthetic for adductor canal block are currently not well defined. Proximal spread of local anesthetic and anatomical variation may explain our observation. Several studies have reported that ACB involves no motor blockade. However, our case report illustrates that the ACB can result in clinically significant quadriceps muscle paralysis. This report suggests that patients should be monitored vigilantly for this occurrence to decrease the risk of falls.
Realization of the BIH terrestrial system
Boucher, C.; Feissel, M.
From 1968 through 1983, the BIH has maintained the orientation of the axes of a conventional terrestrial system on the basis of the stability of time series of the earth rotation parameters (ERP) that are implicitly referred to it. The principles of the definition and maintenance of this system are recalled, and its precision and long term stability are evaluated. It is now possible to realize the terrestrial reference system of the BIH, including the origin and orientation of the axes and the scale unit, on the basis of the permanent stations used in the monitoring of the earth's rotation by space geodesy. The transition to the proposed new realization is described. The principles of the future maintenance and dissemination of the BIH terrestrial system are also outlined.
Realization of DVCCTA Based Versatile Modulator
Neeta Pandey
2014-01-01
Full Text Available A Differential Voltage Current Conveyor Transconductance Amplifier (DVCCTA based versatile modulator is proposed which can work as an amplitude modulator, frequency modulator, delta modulator, and sigma delta modulator. The modulator operational scheme uses pulse generator as a core and its output is used as carrier signal. A DVCCTA based pulse generator is proposed first and subsequently configured as different modulators. Compact realization is the key feature of the proposed circuit as it uses two DVCCTA; a grounded resistor and a grounded capacitor hence are appropriate for IC realization. The functionality of the proposed circuit is verified through SPICE simulations using TSMC 0.25 μm CMOS process model parameters. The performance parameters such as power dissipation and noise for various modulator schemes are also obtained.
Realizing and optimizing an atomtronic SQUID
Mathey, Amy C.; Mathey, L.
2016-05-01
We demonstrate how a toroidal Bose-Einstein condensate with a movable barrier can be used to realize an atomtronic SQUID. The magnitude of the barrier height, which creates the analogue of an SNS junction, is of crucial importance, as well as its ramp-up and -down protocol. For too low of a barrier, the relaxation of the system is dynamically suppressed, due to the small rate of phase slips at the barrier. For a higher barrier, the phase coherence across the barrier is suppressed due to thermal fluctuations, which are included in our Truncated Wigner approach. Furthermore, we show that the ramp-up protocol of the barrier can be improved by ramping up its height first, and its velocity after that. This protocol can be further improved by optimizing the ramp-up and ramp-down time scales, which is of direct practical relevance for on-going experimental realizations.
Estimating quadratic variation using realized variance
Barndorff-Nielsen, Ole Eiler; Shephard, N.
2002-01-01
This paper looks at some recent work on estimating quadratic variation using realized variance (RV) - that is, sums of M squared returns. This econometrics has been motivated by the advent of the common availability of high-frequency financial return data. When the underlying process is a semimar......This paper looks at some recent work on estimating quadratic variation using realized variance (RV) - that is, sums of M squared returns. This econometrics has been motivated by the advent of the common availability of high-frequency financial return data. When the underlying process...... have to impose some weak regularity assumptions. We illustrate the use of the limit theory on some exchange rate data and some stock data. We show that even with large values of M the RV is sometimes a quite noisy estimator of integrated variance. Copyright © 2002 John Wiley & Sons, Ltd....
Effective complexity of stationary process realizations
Ay, Nihat; Szkola, Arleta
2010-01-01
The concept of effective complexity of an object as the minimal description length of its regularities has been initiated by Gell-Mann and Lloyd. Based on their work we gave a precise definition of effective complexity of finite binary strings in terms of algorithmic information theory in our previous paper. Here we study the effective complexity of strings generated by stationary processes. Sufficiently long typical process realizations turn out to be effectively simple under any linear scaling with the string's length of the parameter $\\Delta$ which determines the minimization domain. For a class of computable ergodic processes including i.i.d. and ergodic Markovian processes a stronger result can be shown: There exist sublinear scalings of $\\Delta$ for which typical realizations turn out to be effectively simple. Our results become most transparent in the context of coarse effective complexity --a modification of plain effective complexity, where $\\Delta$ appears as a minimization argument. A similar modif...
Experimental Realization of a Quantum Pentagonal Lattice
Yamaguchi, Hironori; Okubo, Tsuyoshi; Kittaka, Shunichiro; Sakakibara, Toshiro; Araki, Koji; Iwase, Kenji; Amaya, Naoki; Ono, Toshio; Hosokoshi, Yuko
2015-01-01
Geometric frustration, in which competing interactions give rise to degenerate ground states, potentially induces various exotic quantum phenomena in magnetic materials. Minimal models comprising triangular units, such as triangular and Kagome lattices, have been investigated for decades to realize novel quantum phases, such as quantum spin liquid. A pentagon is the second-minimal elementary unit for geometric frustration. The realization of such systems is expected to provide a distinct platform for studying frustrated magnetism. Here, we present a spin-1/2 quantum pentagonal lattice in the new organic radical crystal α-2,6-Cl2-V [=α-3-(2,6-dichlorophenyl)-1,5-diphenylverdazyl]. Its unique molecular arrangement allows the formation of a partially corner-shared pentagonal lattice (PCPL). We find a clear 1/3 magnetization plateau and an anomalous change in magnetization in the vicinity of the saturation field, which originate from frustrated interactions in the PCPL. PMID:26468930
Acoustic wave science realized by metamaterials.
Lee, Dongwoo; Nguyen, Duc Minh; Rho, Junsuk
2017-01-01
Artificially structured materials with unit cells at sub-wavelength scale, known as metamaterials, have been widely used to precisely control and manipulate waves thanks to their unconventional properties which cannot be found in nature. In fact, the field of acoustic metamaterials has been much developed over the past 15 years and still keeps developing. Here, we present a topical review of metamaterials in acoustic wave science. Particular attention is given to fundamental principles of acoustic metamaterials for realizing the extraordinary acoustic properties such as negative, near-zero and approaching-infinity parameters. Realization of acoustic cloaking phenomenon which is invisible from incident sound waves is also introduced by various approaches. Finally, acoustic lenses are discussed not only for sub-diffraction imaging but also for applications based on gradient index (GRIN) lens.
Exploring heterogeneous market hypothesis using realized volatility
Chin, Wen Cheong; Isa, Zaidi; Mohd Nor, Abu Hassan Shaari
2013-04-01
This study investigates the heterogeneous market hypothesis using high frequency data. The cascaded heterogeneous trading activities with different time durations are modelled by the heterogeneous autoregressive framework. The empirical study indicated the presence of long memory behaviour and predictability elements in the financial time series which supported heterogeneous market hypothesis. Besides the common sum-of-square intraday realized volatility, we also advocated two power variation realized volatilities in forecast evaluation and risk measurement in order to overcome the possible abrupt jumps during the credit crisis. Finally, the empirical results are used in determining the market risk using the value-at-risk approach. The findings of this study have implications for informationally market efficiency analysis, portfolio strategies and risk managements.
HERBAL PRODUCT REALIZATION IN ACCORDANCE WITH WHO AND ISO GUIDELINES
S. J. Ameh et al
2012-10-01
Full Text Available Background: Following the Alma-Ata Declaration of 1978, the World Health Organization (WHO began the issuance of guidelines for developing standardized herbal preparations from Traditional Medicine (TM. Similarly in 1987, the International Organization for Standardization (ISO launched the most anticipated industrial standard (ISO 9001 in world history. The seventh (7th clause of ISO 9001’s eight clauses is devoted to “Product Realization”- a quality management system (QMS procedure that includes: planning of product realization; appreciation of customer-related processes; design and development processes; purchasing; production and service provision; and control of measuring and monitoring equipment. Purpose: The article takes a hard look at the QMS processes involved in product realization and the critical stages of the WHO model of herbal drug development from TM, with a view to devising a framework that can be used to promote the production of quality herbal products, commencing from the stage of ethnobotanical survey, through the laboratory, to the clinic.Methodology: Both the WHO model of herbal drug development and the 7th clause of ISO 9001:2008 were critically reviewed and combined to yield a framework that is discussed within the context of guiding herbal drug development from TM. Results and Discussion: The resulting WHO-ISO framework of herbal product realization is discussed in terms of its relevance to practical problems of GMP-production using herbal starting materials, given their innate variability in composition, potency and appearance. Conclusion: The provisions of ISO 9001’s seventh clause can, to a large extent, be applied to the production of quality herbal products developed in accordance with WHO.
AstroSat – Configuration and Realization
K. H. Navalgund; K. Suryanarayana Sarma; Piyush Kumar Gaurav; G. Nagesh; M. Annadurai
2017-06-01
AstroSat is India’s first space-based observatory satellite dedicated to astronomy. It has the capability to perform multi-wavelength and simultaneous observations of cosmic bodies in a wide band of wavelengths. This paper briefly summarizes the challenges faced in the configuration of AstroSat spacecraft, accommodation and sizing of its critical subsystems, their realization and testing of payloads and the integrated satellite.
The impact of voice on speech realization
Jelka Breznik
2014-01-01
The study discusses spoken literary language and the impact of voice on speech realization. The voice consists of a sound made by a human being using the vocal folds for talking, singing, laughing, crying, screaming… The human voice is specifically the part of human sound production in which the vocal folds (vocal cords) are the primary sound source. Our voice is our instrument and identity card. How does the voice (voice tone) affect others and how do they respond, positively or negatively? ...
Optical realization of the dissipative quantum oscillator
Longhi, Stefano
2016-01-01
An optical realization of the damped quantum oscillator, based on transverse light dynamics in an optical resonator with slowly-moving mirrors, is theoretically suggested. The optical resonator setting provides a simple implementation of the time-dependent Caldirola-Kanai Hamiltonian of the dissipative quantum oscillator, and enables to visualize the effects of damped oscillations in the classical (ray optics) limit and wave packet collapse in the quantum (wave optics) regime.
Modular realizations of hyperbolic Weyl groups
Kleinschmidt, Axel; Palmkvist, Jakob
2010-01-01
We study the recently discovered isomorphisms between hyperbolic Weyl groups and unfamiliar modular groups. These modular groups are defined over integer domains in normed division algebras, and we focus on the cases involving quaternions and octonions. We outline how to construct and analyse automorphic forms for these groups; their structure depends on the underlying arithmetic properties of the integer domains. We also give a new realization of the Weyl group W(E8) in terms of unit octavians and their automorphism group.
Realizing Mobile Web Services for Dynamic Applications
Zaplata, Sonja; Dreiling, Viktor; Lamersdorf, Winfried
Use of web services also on mobile devices becomes increasingly relevant. However, realizing such mobile web services based on the standard protocol stack is often inappropriate for resource-restricted mobile devices in dynamic networks. On the other hand, using specialized alternative protocols restricts compatibility with traditional service applications. Thus, existing approaches often do not allow to integrate heterogeneous service instances dynamically, as it is, e.g., required for executing mobile service-based business processes.
Experimental functional realization of attribute grammar system
I. Attali
2002-07-01
Full Text Available In this paper we present an experimental functional realization of attribute grammar(AG system for personal computers. For AG system functioning only Turbo Prolog compiler is required. The system functioning is based on a specially elaborated metalanguage for AG description, universal syntactic and semantic constructors. The AG system provides automatic generation of target compiler (syntax--oriented software using Turbo Prolog as object language.
Realization of Ridge Regression in MATLAB
Dimitrov, S.; Kovacheva, S.; Prodanova, K.
2008-10-01
The least square estimator (LSE) of the coefficients in the classical linear regression models is unbiased. In the case of multicollinearity of the vectors of design matrix, LSE has very big variance, i.e., the estimator is unstable. A more stable estimator (but biased) can be constructed using ridge-estimator (RE). In this paper the basic methods of obtaining of Ridge-estimators and numerical procedures of its realization in MATLAB are considered. An application to Pharmacokinetics problem is considered.
Germanium Blocked Impurity Band (BIB) detectors
Haller, E. E.; Baumann, H.; Beeman, J. W.; Hansen, W. L.; Luke, P. N.; Lutz, M.; Rossington, C. S.; Wu, I. C.
1989-01-01
Information is given in viewgraph form. The advantages of the Si blocked impurity band (BIB) detector invented by M. D. Petroff and M. G. Stabelbroek are noted: smaller detection volume leading to a reduction of cosmic ray interference, extended wavelength response because of dopant wavefunction overlap, and photoconductive gain of unity. It is argued that the stated advantages of Si BIB detectors should be realizable for Ge BIB detectors. Information is given on detector development, subtrate choice and preparation, wafer polising, epitaxy, characterization of epi layers, and preliminary Ge BIB detector test results.
Business Planning for Parenthood.
Spruell, Geraldine
1986-01-01
With more mothers than ever in the labor force, companies are realizing they must help workers deal with multiple roles. Employer-sponsored programs include day care centers, vouchers, and referrals; flextime; job sharing; extended leave, flexible benefits, and work-at-home plans; and support groups. (CH)
Spatial Scheduling Optimization Algorithm for Block Assembly in Shipbuilding
Zhengyang Shang
2017-01-01
Full Text Available Block assembly consumes the majority of processing time and resources in shipbuilding, and the block spatial scheduling (BSS related to block assembly has been widely studied as the key to improve shipbuilding efficiency. BSS is a complicated NP-hard problem that aims to minimize the makespan. Since each block has specific building time and space constraints, the BSS problem can be hardly found with an acceptable solution by using constant scheduling rules. Thus, in this study, we considered the BSS problem as a time-constrained 3D bin packing mathematical model and proposed an allocation algorithm, best contact algorithm (BCA, that is more suitable for dynamic processes. Then, for global optimization of the BSS problem, we regarded the starting time of each block as a variable and used the genetic algorithm (GA to operate and optimize the block assembly sequence. Finally, we tested the BCA + GA scheduling system with real data from a shipyard and thereby determined the block scheduling status and the daily utilization rate of the work plate. Comparison shows that the proposed algorithm is able to get shorter makespan and better block scheduling effect; it realized the optimization of the block spatial scheduling dynamically.
Capturing Reality at Centre Block
Boulanger, C.; Ouimet, C.; Yeomans, N.
2017-08-01
The Centre Block of Canada's Parliament buildings, National Historic Site of Canada is set to undergo a major rehabilitation project that will take approximately 10 years to complete. In preparation for this work, Heritage Conservation Services (HCS) of Public Services and Procurement Canada has been completing heritage documentation of the entire site which includes laser scanning of all interior rooms and accessible confined spaces such as attics and other similar areas. Other documentation completed includes detailed photogrammetric documentation of rooms and areas of high heritage value. Some of these high heritage value spaces present certain challenges such as accessibility due to the height and the size of the spaces. Another challenge is the poor lighting conditions, requiring the use of flash or strobe lighting to either compliment or completely eliminate the available ambient lighting. All the spaces captured at this higher level of detail were also captured with laser scanning. This allowed the team to validate the information and conduct a quality review of the photogrammetric data. As a result of this exercise, the team realized that in most, if not all cases, the photogrammetric data was more detailed and at a higher quality then the terrestrial laser scanning data. The purpose and motivation of this paper is to present these findings, as well provide the advantages and disadvantages of the two methods and data sets.
CAPTURING REALITY AT CENTRE BLOCK
C. Boulanger
2017-08-01
Full Text Available The Centre Block of Canada’s Parliament buildings, National Historic Site of Canada is set to undergo a major rehabilitation project that will take approximately 10 years to complete. In preparation for this work, Heritage Conservation Services (HCS of Public Services and Procurement Canada has been completing heritage documentation of the entire site which includes laser scanning of all interior rooms and accessible confined spaces such as attics and other similar areas. Other documentation completed includes detailed photogrammetric documentation of rooms and areas of high heritage value. Some of these high heritage value spaces present certain challenges such as accessibility due to the height and the size of the spaces. Another challenge is the poor lighting conditions, requiring the use of flash or strobe lighting to either compliment or completely eliminate the available ambient lighting. All the spaces captured at this higher level of detail were also captured with laser scanning. This allowed the team to validate the information and conduct a quality review of the photogrammetric data. As a result of this exercise, the team realized that in most, if not all cases, the photogrammetric data was more detailed and at a higher quality then the terrestrial laser scanning data. The purpose and motivation of this paper is to present these findings, as well provide the advantages and disadvantages of the two methods and data sets.
Blocking the Hawking radiation
Autzen, M.; Kouvaris, C.
2014-01-01
Some severe constraints on asymmetric dark matter are based on the scenario that certain types of weakly interacting massive particles can form mini-black holes inside neutron stars that can lead to their destruction. A crucial element for the realization of this scenario is that the black hole g...
Bussink, Barbara E; Holst, Anders Gaarsdal; Jespersen, Lasse
2013-01-01
AimsTo determine the prevalence, predictors of newly acquired, and the prognostic value of right bundle branch block (RBBB) and incomplete RBBB (IRBBB) on a resting 12-lead electrocardiogram in men and women from the general population.Methods and resultsWe followed 18 441 participants included.......5%/2.3% in women, P Right bundle branch block was associated with significantly...... increased all-cause and cardiovascular mortality in both genders with age-adjusted hazard ratios (HR) of 1.31 [95% confidence interval (CI), 1.11-1.54] and 1.87 (95% CI, 1.48-2.36) in the gender pooled analysis with little attenuation after multiple adjustment. Right bundle branch block was associated...
31 CFR 547.302 - Blocked account; blocked property.
2010-07-01
.... 547.302 Section 547.302 Money and Finance: Treasury Regulations Relating to Money and Finance... SANCTIONS REGULATIONS General Definitions § 547.302 Blocked account; blocked property. The terms blocked account and blocked property shall mean any account or property subject to the prohibitions in § 547.201...
A realizable quantum encryption algorithm for qubits
Zhou Nan-Run; Zeng Gui-Hua
2005-01-01
A realizable quantum encryption algorithm for qubits is presented by employing bit-wise quantum computation.System extension and bit-swapping are introduced into the encryption process, which makes the ciphertext space expanded greatly. The security of the proposed algorithm is analysed in detail and the schematic physical implementation is also provided. It is shown that the algorithm, which can prevent quantum attack strategy as well as classical attack strategy, is effective to protect qubits. Finally, we extend our algorithm to encrypt classical binary bits and quantum entanglements.
Linguistic granular model: design and realization
YUE Shihong; LI Ping; SONG Zhihuan
2005-01-01
A new linguistic granular model is proposed and the effect of its parameters on the output is analyzed. The design of the model consists of two stages: using conditional fuzzy clustering for information granular, and integrating all information granules to final output. The integrating tool is fuzzy integral based on fuzzy measure, and the generalization of fuzzy integral increases flexibility of the linguistic granular model greatly. A heuristic algorithm to determine the parameters in the fuzzy integral is used to realize the linguistic model. Two experiments verify the feasibility of the proposed model.
APM Best Practices Realizing Application Performance Management
Sydor, Michael J
2011-01-01
The objective of APM Best Practices: Realizing Application Performance Management is to establish reliable application performance management (APM) practices - to demonstrate value, to do it quickly, and to adapt to the client circumstances. It's important to balance long-term goals with short-term deliverables, but without compromising usefulness or correctness. The successful strategy is to establish a few reasonable goals, achieve them quickly, and then iterate over the same topics two more times, with each successive iteration expanding the skills and capabilities of the APM team. This str
Superworldvolume dynamics of superbranes from nonlinear realizations
Bellucci, S. [Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Frascati, Frascati, RM (Italy); Ivanov, E. [Paris Univ., Paris (France). Lab. de Physique Theorique et des Hautes Energies]|[Bogoliubov Laboratory of Theoretical Physics, Dubna, Moscow (USSR); Krivonos, S. [Bogoliubov Laboratory of Theoretical Physics, Dubna, Moscow (USSR)
2000-07-01
Based on the concept of the partial breaking of global supersymmetry (PBGS), it has been derived the worldvolume superfield equations of motion for N=1, D=4 supermembrane, as well as for the space-time filling D2- and D3-branes, from nonlinear realizations of the corresponding supersymmetries. It has been argued that it is of no need to take care of the relevant automorphism groups when being interested in the dynamical equations. This essentially facilitates computations. As a by-product, it has been obtained a new polynomial representation for the d=3,4 Born-Infeld equations, with merely a cubic nonlinearity.
On the Realization of Popper's Experiment
Qureshi, T
2005-01-01
An experiment proposed by Karl Popper to test the standard interpretation of quantum mechanics was realized by Kim and Shih. We use a quantum mechanical calculation to analyze Popper's proposal, and find a surprising result for the location of the virtual slit. We also analyze Kim and Shih's experiment, and demonstrate that although it ingeneously overcomes the problem of temporal spreading of the wave-packet, it is inconclusive about Popper's test. We point out that another experiment which implements Popper's test in a conlcusive way, has actually been carried out. Its results are in contradiction with Popper's prediction, and agree with our analysis.
Analysis of Popper's Experiment and Its Realization
Qureshi, T.
2012-04-01
An experiment proposed by Karl Popper to test the standard interpretation of quantum mechanics was realized by Kim and Shih. We use a quantum mechanical calculation to analyze Popper's proposal, and find a surprising result for the location of the virtual slit. We also analyze Kim and Shih's experiment, and demonstrate that although it ingeniously overcomes the problem of temporal spreading of the wave-packet, it is inconclusive about Popper's test. We point out that another experiment which (unknowingly) implements Popper's test in a conclusive way, has actually been carried out. Its results are in contradiction with Popper's prediction, and agree with our analysis.
Modelling and Forecasting Multivariate Realized Volatility
Chiriac, Roxana; Voev, Valeri
This paper proposes a methodology for modelling time series of realized covariance matrices in order to forecast multivariate risks. The approach allows for flexible dynamic dependence patterns and guarantees positive definiteness of the resulting forecasts without imposing parameter restrictions....... We provide an empirical application of the model, in which we show by means of stochastic dominance tests that the returns from an optimal portfolio based on the model's forecasts second-order dominate returns of portfolios optimized on the basis of traditional MGARCH models. This result implies...
Topological descendants DDK and KM realizations
Gato-Rivera, Beatriz; Gato-Rivera, Beatriz; Rosado, Jose Ignacio
1994-01-01
The "minimal matter + scalar" system can be embedded into the twisted N=2 topological algebra in two ways: a la DDK or a la KM. Here we present some results concerning the topological descendants and their DDK and KM realizations. In particular, we prove four "no-ghost" theorems (two for null states) regarding the reduction of the topological descendants into secon- daries of the "minimal matter + scalar" conformal field theory. We write down the relevant expressions for the case of level 2 descendants.
Stylized facts and multiple realizability in econophysics
Christophe Schinckus
2014-01-01
Full Text Available Stylized facts are persistent macro-regularities which cannot be described in terms of microeconomic theory. Through the argument of multiple realizability, this methodological paper claims that a top down agent-based econophysics can contribute to a better understanding of complex economic systems in two ways: on the one hand, it clarifies the gap between micro and macro scales by proving an algorithmic derivability of the latter; and on the other hand, this modelling provides microfoundations (and then potentially an economic meaning to macro-patterns usually identified in the observation of these complex systems.
New approaches to generalized Hamiltonian realization of autonomous nonlinear systems
王玉振; 李春文; 程代展
2003-01-01
The Hamiltonian function method plays an important role in stability analysis and stabilization. The key point in applying the method is to express the system under consideration as the form of dissipative Hamiltonian systems, which yields the problem of generalized Hamiltonian realization. This paper deals with the generalized Hamiltonian realization of autonomous nonlinear systems. First, this paper investigates the relation between traditional Hamiltonian realizations and first integrals, proposes a new method of generalized Hamiltonian realization called the orthogonal decomposition method, and gives the dissipative realization form of passive systems. This paper has proved that an arbitrary system has an orthogonal decomposition realization and an arbitrary asymptotically stable system has a strict dissipative realization. Then this paper studies the feedback dissipative realization problem and proposes a control-switching method for the realization. Finally,this paper proposes several sufficient conditions for feedback dissipative realization.
Impact of robotic ultrasound image guidance on plan quality in SBRT of the prostate.
Gerlach, Stefan; Kuhlemann, Ivo; Ernst, Floris; Fürweger, Christoph; Schlaefer, Alexander
2017-07-27
Ultrasound provides good image quality, fast volumetric imaging, and is established for abdominal image guidance. Robotic transducer placement may facilitate intra-fractional motion compensation in radiation therapy. We consider integration with the CyberKnife and study whether the kinematic redundancy of a seven-degrees-of-freedom robot allows for acceptable plan quality for prostate treatments. Reference treatment plans were generated for ten prostate cancer cases previously treated with the CyberKnife. Considering transducer and prostate motion by different safety margins, ten different robot poses, and three different elbow configurations, we removed all beams colliding with robot or transducer. For each combination, plans were generated using the same strict dose constraints and the objective to maximize the target coverage. Additionally, plans for the union of all unblocked beams were generated. In nine cases the planning target coverage with the ultrasound robot was within 1.1 percentage points of the reference coverage. It was 1.7 percentage points for one large prostate. For one preferable robot position, kinematic redundancy decreased the average number of blocked beam directions from 23.1 to 14.5. The impact of beam blocking can largely be offset by treatment planning and using a kinematically redundant robot. Plan quality can be maintained by carefully choosing the ultrasound robot position and pose. For smaller planning target volumes the difference in coverage is negligible for safety margins of up to 35 mm. Advances in Knowledge: Integrating a robot for online intra-fractional image guidance based on ultrasound can be realized while maintaining acceptable plan quality for prostate cancer treatments with the CyberKnife.
Design and realization of CMOS image sensor
Xu, Jian; Xiao, Zexin
2008-02-01
A project was presented that instrumental design of an economical CMOS microscope image sensor. A high performance, low price, black-white camera chip OV5116P was used as the core of the sensor circuit; Designing and realizing peripheral control circuit of sensor; Through the control on dial switch to realize different functions of the sensor chip in the system. For example: auto brightness level descending function on or off; gamma correction function on or off; auto and manual backlight compensation mode conversion and so on. The optical interface of sensor is designed for commercialization and standardization. The images of sample were respectively gathered with CCD and CMOS. Result of the experiment indicates that both performances were identical in several aspects as follows: image definition, contrast control, heating degree and the function can be adjusted according to the demand of user etc. The imperfection was that the CMOS with smaller field and higher noise than CCD; nevertheless, the maximal advantage of choosing the CMOS chip is its low cost. And its imaging quality conformed to requirement of the economical microscope image sensor.
... along with the National Institute of Dental and Craniofacial Research (NIDCR) and the National Institute of General Medical Sciences (NIGMS). This finding shows that a specific combination of two molecules can block only pain-related neurons. It holds the promise of major ...
1983-03-01
1967, Cedergren 1974, Federal Highway .’,U .. V,47 -’":: 37 Administration 1980). Block pavements have essentially the same prob- lems with moisture...Vicksburg, Miss. Cedergren , H. R. 1974. Drainage of Highway and Airfield Pavements, John Wiley and Sons, New VOk. I Cement and Concrete Association
Evie Lamtiur
2015-08-01
Full Text Available Young patients with class II skeletal malocclusion are often found. To avoid further discrepancy of this case, myofunctional therapy is one of the options. Functional appliance often used for such treatment. Functional appliance has been modified since activator was introduced by Andresen. With its bulky shape, activator makes difficulty for patient to speak and eat. Patient unable to wear it full time due to uncomfortness and negative facial appearance. In 1977, Clark developed twin block to overcome the weakness of previous appliances. A more simple design allows patient to be more comfortable and willing to wear it longer. Twin block is myofunctional appliance to reposition the mandible forward for skeletal class II correction with retruded mandible. This paper describes the design, clinical management effects of twin block treatment and brief case presentation using twin block appliance. Similar to the study reports found, this case revealed improvement of facial appearance, decrease overjet and overbite, improvement of molar relationship and good compliance of patient.
Contaminated soil concrete blocks
Korte, de A.C.J.; Brouwers, H.J.H.; Limbachiya, Mukesh C.; Kew, Hsein Y.
2009-01-01
According to Dutch law the contaminated soil needs to be remediated or immobilised. The main focus in this article is the design of concrete blocks, containing contaminated soil, that are suitable for large production, financial feasible and meets all technical and environmental requirements. In ord
William R. Veal
1999-09-01
Full Text Available This study examined the effects of a tri-schedule on the academic achievement of students in a high school. The tri-schedule consists of traditional, 4x4 block, and hybrid schedules running at the same time in the same high school. Effectiveness of the schedules was determined from the state mandated test of basic skills in reading, language, and mathematics. Students who were in a particular schedule their freshman year were tested at the beginning of their sophomore year. A statistical ANCOVA test was performed using the schedule types as independent variables and cognitive skill index and GPA as covariates. For reading and language, there was no statistically significant difference in test results. There was a statistical difference mathematics-computation. Block mathematics is an ideal format for obtaining more credits in mathematics, but the block format does little for mathematics achievement and conceptual understanding. The results have content specific implications for schools, administrations, and school boards who are considering block scheduling adoption.
2010-12-27
... URBAN DEVELOPMENT Emergency Comment Request; Indian Housing Block Grants (IHBG) Program Reporting... Block Grant (IHBG) funds provide plans for low-income housing programs in their communities and submit... be missed. This Notice also lists the following information: Title of Proposal: Indian Housing Block...
Epps, Thomas H.; O'Reilly, Rachel K.
2016-01-01
n this perspective, we survey recent advances in the synthesis and characterization of block copolymers, discuss several key materials opportunities enabled by block copolymers, and highlight some of the challenges that currently limit further realization of block copolymers in promising nanoscale applications. One significant challenge, especially as the complexity and functionality of designer macromolecules increases, is the requirement of multiple complementary techniques to fully charact...
Linguistically Motivated Features for CCG Realization Ranking
Rajkumar, Rajakrishnan
2012-01-01
Natural Language Generation (NLG) is the process of generating natural language text from an input, which is a communicative goal and a database or knowledge base. Informally, the architecture of a standard NLG system consists of the following modules (Reiter and Dale, 2000): content determination, sentence planning (or microplanning) and surface…
Realization of mid-infrared graphene hyperbolic metamaterials.
Chang, You-Chia; Liu, Che-Hung; Liu, Chang-Hua; Zhang, Siyuan; Marder, Seth R; Narimanov, Evgenii E; Zhong, Zhaohui; Norris, Theodore B
2016-02-04
While metal is the most common conducting constituent element in the fabrication of metamaterials, graphene provides another useful building block, that is, a truly two-dimensional conducting sheet whose conductivity can be controlled by doping. Here we report the experimental realization of a multilayer structure of alternating graphene and Al2O3 layers, a structure similar to the metal-dielectric multilayers commonly used in creating visible wavelength hyperbolic metamaterials. Chemical vapour deposited graphene rather than exfoliated or epitaxial graphene is used, because layer transfer methods are easily applied in fabrication. We employ a method of doping to increase the layer conductivity, and our analysis shows that the doped chemical vapour deposited graphene has good optical properties in the mid-infrared range. We therefore design the metamaterial for mid-infrared operation; our characterization with an infrared ellipsometer demonstrates that the metamaterial experiences an optical topological transition from elliptic to hyperbolic dispersion at a wavelength of 4.5 μm.
Realization of mid-infrared graphene hyperbolic metamaterials
Chang, You-Chia; Liu, Che-Hung; Liu, Chang-Hua; Zhang, Siyuan; Marder, Seth R.; Narimanov, Evgenii E.; Zhong, Zhaohui; Norris, Theodore B.
2016-02-01
While metal is the most common conducting constituent element in the fabrication of metamaterials, graphene provides another useful building block, that is, a truly two-dimensional conducting sheet whose conductivity can be controlled by doping. Here we report the experimental realization of a multilayer structure of alternating graphene and Al2O3 layers, a structure similar to the metal-dielectric multilayers commonly used in creating visible wavelength hyperbolic metamaterials. Chemical vapour deposited graphene rather than exfoliated or epitaxial graphene is used, because layer transfer methods are easily applied in fabrication. We employ a method of doping to increase the layer conductivity, and our analysis shows that the doped chemical vapour deposited graphene has good optical properties in the mid-infrared range. We therefore design the metamaterial for mid-infrared operation; our characterization with an infrared ellipsometer demonstrates that the metamaterial experiences an optical topological transition from elliptic to hyperbolic dispersion at a wavelength of 4.5 μm.
Perpendicularly Aligned, Anion Conducting Nanochannels in Block Copolymer Electrolyte Films
Arges, Christopher G.; Kambe, Yu; Suh, Hyo Seon; Ocola, Leonidas E.; Nealey, Paul F.
2016-03-08
Connecting structure and morphology to bulk transport properties, such as ionic conductivity, in nanostructured polymer electrolyte materials is a difficult proposition because of the challenge to precisely and accurately control order and the orientation of the ionic domains in such polymeric films. In this work, poly(styrene-block-2-vinylpyridine) (PSbP2VP) block copolymers were assembled perpendicularly to a substrate surface over large areas through chemical surface modification at the substrate and utilizing a versatile solvent vapor annealing (SVA) technique. After block copolymer assembly, a novel chemical vapor infiltration reaction (CVIR) technique selectively converted the 2-vinylpyridine block to 2-vinyl n-methylpyridinium (NMP+ X-) groups, which are anion charge carriers. The prepared block copolymer electrolytes maintained their orientation and ordered nanostructure upon the selective introduction of ion moieties into the P2VP block and post ion-exchange to other counterion forms (X- = chloride, hydroxide, etc.). The prepared block copolymer electrolyte films demonstrated high chloride ion conductivities, 45 mS cm(-1) at 20 degrees C in deionized water, the highest chloride ion conductivity for anion conducting polymer electrolyte films. Additionally, straight-line lamellae of block copolymer electrolytes were realized using chemoepitaxy and density multiplication. The devised scheme allowed for precise and accurate control of orientation of ionic domains in nanostructured polymer electrolyte films and enables a platform for future studies that examines the relationship between polymer electrolyte structure and ion transport.
Strategic Planning Implementation in Indonesia’s Transmigration Plan.
1984-06-01
replaced the Hinduism of the :ndonesians. (Now 90 7,ercent of Indonesia are moslem) excekt for the Balinese, some Javanese , and some Chinese. Currently...block number) I Transmigration, Indonesia , Strategic Planning,"Indon ia s e- velopment Plan, Presidential Decree, t N ASe- Migration, Strategy, Racial...84 5 LIST OF TABLES I. Pcpulation Density of Indonesia in 1978 and 1980 .. ....... ....... ...... *,2 II. Distribution
Challenges in realizing ultraflat materials surfaces
Takashi Yatsui
2013-12-01
Full Text Available Ultraflat surface substrates are required to achieve an optimal performance of future optical, electronic, or optoelectronic devices for various applications, because such surfaces reduce the scattering loss of photons, electrons, or both at the surfaces and interfaces. In this paper, we review recent progress toward the realization of ultraflat materials surfaces. First, we review the development of surface-flattening techniques. Second, we briefly review the dressed photon–phonon (DPP, a nanometric quasiparticle that describes the coupled state of a photon, an electron, and a multimode-coherent phonon. Then, we review several recent developments based on DPP-photochemical etching and desorption processes, which have resulted in angstrom-scale flat surfaces. To confirm that the superior flatness of these surfaces that originated from the DPP process, we also review a simplified mathematical model that describes the scale-dependent effects of optical near-fields. Finally, we present the future outlook for these technologies.
Neuromorphic VLSI realization of the hippocampal formation.
Aggarwal, Anu
2016-05-01
The medial entorhinal cortex grid cells, aided by the subicular head direction cells, are thought to provide a matrix which is utilized by the hippocampal place cells for calculation of position of an animal during spatial navigation. The place cells are thought to function as an internal GPS for the brain and provide a spatiotemporal stamp on episodic memories. Several computational neuroscience models have been proposed to explain the place specific firing patterns of the cells of the hippocampal formation - including the GRIDSmap model for grid cells and Bayesian integration for place cells. In this work, we present design and measurement results from a first ever system of silicon circuits which successfully realize the function of the hippocampal formation of brain based on these models.
Discrete Time Crystals: Rigidity, Criticality, and Realizations
Yao, N. Y.; Potter, A. C.; Potirniche, I.-D.; Vishwanath, A.
2017-01-01
Despite being forbidden in equilibrium, spontaneous breaking of time translation symmetry can occur in periodically driven, Floquet systems with discrete time-translation symmetry. The period of the resulting discrete time crystal is quantized to an integer multiple of the drive period, arising from a combination of collective synchronization and many body localization. Here, we consider a simple model for a one-dimensional discrete time crystal which explicitly reveals the rigidity of the emergent oscillations as the drive is varied. We numerically map out its phase diagram and compute the properties of the dynamical phase transition where the time crystal melts into a trivial Floquet insulator. Moreover, we demonstrate that the model can be realized with current experimental technologies and propose a blueprint based upon a one dimensional chain of trapped ions. Using experimental parameters (featuring long-range interactions), we identify the phase boundaries of the ion-time-crystal and propose a measurable signature of the symmetry breaking phase transition.
On the Realization of the Dynamics Relativity
Li, C Y C K
2005-01-01
The realization of the relativity of physical laws is discussed in this paper. First, we propose a kind of new relativity, that is the gravitational interaction survey actually may for the observation of any local region is relative. Moreover, the equivalence of such a relativity with the kinematic quantity further lead to the same mathematical form of gravity theory as Einstein's field equation. Secondly, inertial reference frames can be naturally established resorting to "the minimal-gravity-free observer", which is defined to apply the "law of inertia" locally. Therefore, dynamical equations would be form-invariant only to such inertial reference frames at different levels. In the spirit of such a $moderate$ $relativity$, the metric of the gravity-geometrized space-time in the cosmological observation theory should be rewritten. We introduce two geometrical variables $\\{b(t),a(t)\\}$ into the cosmological metric according to the varying gravity in the universe, for $b(t)$ is the gravitational time dilation ...
Realization of Green MOT for Ytterbium Atoms
ZHAO Peng-Yi; XIONG Zhuan-Xian; LONG Yun; HE Ling-Xiang; L(U) Bao-Long
2009-01-01
We report the experimental realization of a magneto-optical trap (MOT) of 174Yb atoms operating on the 1S0-3p1 intercombination transition at 555.8 nm.The green MOT is loaded by a Zeeman-slowed atomic beam.In order to increase the capture velocity of the MOT,we use the trapping laser beams consisting of five discrete frequency components obtained by modulating the laser light through an electro-optic modulator.The trapped atomic number of the 174 Yb isotope is about 6.2×105,and the temperature of the cold atowic cloud is estimated to be about 100 μK.The success of the green MOT is an important step towards the goad of an ytterbium optical dock.
Another Way To Realize Maxwell's Demon
Fu, X; Fu, Xinyong; Fu, Zitao
2005-01-01
This is another approach to realize Maxwell's demon hypothesis. Two Ag-O-Cs thermal electron ejectors, A and B, are settled in a vacuum tube. A non-uniform magnetic field exerted on the tube provides a one-way channel for the thermal electrons. Ejector A, losing electrons, charges positively, while ejector B, getting electrons, charges negatively, resulting in an electric voltage. In flying from A to B, the speed of the electrons decreases, and part of their thermal kinetic energy converts into electric potential energy. Thus, the temperature of the whole electron tube drops down slightly, and that can be compensated by the heat attracted from the ambient air. The device can provide a small but macroscopic power to an external load, violating Kelvin's statement of the second law.
Lattice Theories with Nonlinearly Realized Chiral Symmetry
Chandrasekharan, S; Steffen, F D; Wiese, U J
2003-01-01
We present the lattice formulation of effective Lagrangians in which chiral symmetry is realized nonlinearly on the fermion fields. In this framework both the Wilson term removing unphysical doubler fermions and the fermion mass term do not break chiral symmetry. Our lattice formulation allows us to address non-perturbative questions in effective theories of baryons interacting with pions and in models involving constitutent quarks interacting with pions and gluons. With the presented methods, a system containing a non-zero density of static baryons interacting with pions can be studied on the lattice without encountering a complex action problem. This might lead to new insights into the phase diagram of strongly interacting matter at non-zero chemical potential.
Discrete Time Crystals: Rigidity, Criticality, and Realizations.
Yao, N Y; Potter, A C; Potirniche, I-D; Vishwanath, A
2017-01-20
Despite being forbidden in equilibrium, spontaneous breaking of time translation symmetry can occur in periodically driven, Floquet systems with discrete time-translation symmetry. The period of the resulting discrete time crystal is quantized to an integer multiple of the drive period, arising from a combination of collective synchronization and many body localization. Here, we consider a simple model for a one-dimensional discrete time crystal which explicitly reveals the rigidity of the emergent oscillations as the drive is varied. We numerically map out its phase diagram and compute the properties of the dynamical phase transition where the time crystal melts into a trivial Floquet insulator. Moreover, we demonstrate that the model can be realized with current experimental technologies and propose a blueprint based upon a one dimensional chain of trapped ions. Using experimental parameters (featuring long-range interactions), we identify the phase boundaries of the ion-time-crystal and propose a measurable signature of the symmetry breaking phase transition.
Realized Variance and Market Microstructure Noise
Hansen, Peter R.; Lunde, Asger
2006-01-01
We study market microstructure noise in high-frequency data and analyze its implications for the realized variance (RV) under a general specification for the noise. We show that kernel-based estimators can unearth important characteristics of market microstructure noise and that a simple kernel......-based estimator dominates the RV for the estimation of integrated variance (IV). An empirical analysis of the Dow Jones Industrial Average stocks reveals that market microstructure noise its time-dependent and correlated with increments in the efficient price. This has important implications for volatility...... estimation based on high-frequency data. Finally, we apply cointegration techniques to decompose transaction prices and bid-ask quotes into an estimate of the efficient price and noise. This framework enables us to study the dynamic effects on transaction prices and quotes caused by changes in the efficient...
Realization of Thermal Inertia in Frequency Domain
Boe-Shong Hong
2014-02-01
Full Text Available To realize the lagging behavior in heat conduction observed in these two decades, this paper firstly theoretically excludes the possibility that the underlying thermal inertia is a result of the time delay in heat diffusion. Instead, we verify in experiments the electro-thermal analogy, wherein the thermal inertial is parameterized by thermal inductance that formulates hyperbolic heat-conduction. The thermal hyperbolicity exhibits a special frequency response in Bode plot, wherein the amplitude ratios is kept flat after crossing some certain frequency, as opposed to Fourier heat-conduction. We apply this specialty to design an instrument that reliably identifies thermal inductances of some materials in frequency domain. The instrument is embedded with a DSP-based frequency synthesizer capable of modulating frequencies in utmost high-resolution. Thermal inertia implies a new possibility for energy storage in analogy to inductive energy storage in electricity or mechanics.
Realism in the Realized Popper's Experiment
Hunter, G
2005-01-01
The realization of Karl Popper's EPR-like experiment by Shih and Kim (published 1999) produced the result that Popper hoped for: no ``action at a distance'' on one photon of an entangled pair when a measurement is made on the other photon. This experimental result is interpretable in local realistic terms: each photon has a definite position and transverse momentum most of the time; the position measurement on one photon (localization within a slit) disturbs the transverse momentum of that photon in a non-predictable way in accordance with the uncertainty principle; however, there is no effect on the other photon (the photon that is not in a slit) no action at a distance. The position measurement (localization within a slit) of the one photon destroys the entanglement between the photons; i.e. decoherence occurs.
Topological Insulator Realized with Piezoelectric Resonators
McHugh, S.
2016-07-01
We propose a realization of a two-dimensional topological insulator using an array of microwave piezoelectric resonators. The resonators are coupled electrically, but acoustically isolated. The inter-resonator electromagnetic coupling required to reproduce an effective mechanical topological insulator is found explicitly. Both the acoustic and electric response show the essential features of topological insulator, e.g., helical edge states. The helical edge states may be useful for engineering nonreciprocal electronic devices like isolators and circulators. These components do not often appear in the radios of modern mobile phones since they traditionally require bulky magnetic material. However, a nonreciprocal device based on piezoelectric resonators may meet the demands of phone manufacturers due to their small size, high-linearity, and ease of fabrication.
Realization of allowable qeneralized quantum gates
无
2010-01-01
The most general duality gates were introduced by Long,Liu and Wang and named allowable generalized quantum gates (AGQGs,for short).By definition,an allowable generalized quantum gate has the form of U=YfkjsckUK,where Uk’s are unitary operators on a Hilbert space H and the coefficients ck’s are complex numbers with |Yfijo ck\\ ∧ 1 an d 1ck| <1 for all k=0,1,...,d-1.In this paper,we prove that an AGQG U=YfkZo ck∧k is realizable,i.e.there are two d by d unitary matrices W and V such that ck=W0kVk0 (0
New Realization of Periodic Cycled Separation
Toftegard, Bjarne; Clausen, Charlotte H.; Jørgensen, Sten B.;
2016-01-01
A new realization of periodic cycled gas/liquid separation is presented. Separation factors and column efficiencies are compared for a column stripping ammonia from water with air, using three different sets of internals: conventional sieve trays, Sulzer BX gauze packings, and periodically cycled...... trays. The proposed new periodic trays are shown to be advantageous compared to their continuous alternatives. It is demonstrated experimentally that periodic tray efficiencies of up to 300% are achievable. With the proposed new tray design, a new operation form is also introduced in which the trays...... are drained sequentially rather than simultaneously, such that the vapor flow is not interrupted during the liquid drainage. For different ratios of counter-current vapor/liquid flow rates, column efficiencies for periodically cycled columns are shown experimentally to be two times greater than those...
Realize Tarim Oilfield Take-off
无
2007-01-01
@@ PetroChina Tarim Oilfield Company, former Tarim Petroleum Exploration & Development Bureau founded in April 1989, is one of the regional subsidiaries under PetroChina Company Limited (PetroChina). It is a large-scale oil company integrated in petroleum exploration and development, oil refining, production of petrochemicals, technological study and marketing business. Headquartered on the bank of Peacock River in Korle City of Xinjiang Uygur Autonomous Region, the company operates itself in more than 20 counties of five prefectures around Tarim Basin. It has since its foundation adhered to the principles of "adopting new management system and new technology, as well as realizing high-grade and high-efficiency battle for oil", implemented market operation, contract management,professional service, and socialization dependence.
String theory realizations of the nilpotent goldstino
Kallosh, Renata; Quevedo, Fernando; Uranga, Angel M.
2015-12-01
We describe in detail how the spectrum of a single anti-D3-brane in four-dimensional orientifolded IIB string models reproduces precisely the field content of a nilpotent chiral superfield with the only physical component corresponding to the fermionic goldstino. In particular we explicitly consider a single anti-D3-brane on top of an O3-plane in warped throats, induced by (2, 1) fluxes. More general systems including several anti-branes and other orientifold planes are also discussed. This provides further evidence to the claim that non-linearly realized supersymmetry due to the presence of antibranes in string theory can be described by supersymmetric theories including nilpotent superfields. Implications to the KKLT and related scenarios of de Sitter moduli stabilization, to cosmology and to the structure of soft SUSY-breaking terms are briefly discussed.
String theory realizations of the nilpotent goldstino
Kallosh, Renata [Department of Physics and SITP, Stanford University, Stanford, CA 94305 (United States); Quevedo, Fernando [ICTP, Strada Costiera 11, 34151 Trieste (Italy); DAMTP, CMS, University of Cambridge, Wilberforce Road, Cambridge, CB3 0WA (United Kingdom); Uranga, Angel M. [Instituto de Física Teórica UAM-CSIC, c/ Nicolás Cabrera 13-15, 28049 Madrid (Spain)
2015-12-09
We describe in detail how the spectrum of a single anti-D3-brane in four-dimensional orientifolded IIB string models reproduces precisely the field content of a nilpotent chiral superfield with the only physical component corresponding to the fermionic goldstino. In particular we explicitly consider a single anti-D3-brane on top of an O3-plane in warped throats, induced by (2,1) fluxes. More general systems including several anti-branes and other orientifold planes are also discussed. This provides further evidence to the claim that non-linearly realized supersymmetry due to the presence of antibranes in string theory can be described by supersymmetric theories including nilpotent superfields. Implications to the KKLT and related scenarios of de Sitter moduli stabilization, to cosmology and to the structure of soft SUSY-breaking terms are briefly discussed.
Realized Variance and Market Microstructure Noise
Hansen, Peter R.; Lunde, Asger
2006-01-01
We study market microstructure noise in high-frequency data and analyze its implications for the realized variance (RV) under a general specification for the noise. We show that kernel-based estimators can unearth important characteristics of market microstructure noise and that a simple kernel......-based estimator dominates the RV for the estimation of integrated variance (IV). An empirical analysis of the Dow Jones Industrial Average stocks reveals that market microstructure noise its time-dependent and correlated with increments in the efficient price. This has important implications for volatility...... estimation based on high-frequency data. Finally, we apply cointegration techniques to decompose transaction prices and bid-ask quotes into an estimate of the efficient price and noise. This framework enables us to study the dynamic effects on transaction prices and quotes caused by changes in the efficient...
Robust paths to realize nonadiabatic holonomic gates
Xu, G. F.; Zhao, P. Z.; Tong, D. M.; Sjöqvist, Erik
2017-05-01
To realize one desired nonadiabatic holonomic gate, various equivalent evolution paths can be chosen. However, in the presence of errors, these paths become inequivalent. In this paper we investigate the difference of these evolution paths in the presence of systematic Rabi-frequency errors and aim to find paths with optimal robustness to realize one-qubit nonadiabatic holonomic gates. We focus on three types of evolution paths in the Λ system: paths belonging to the original two-loop scheme [E. Sjöqvist et al., New J. Phys. 14, 103035 (2012), 10.1088/1367-2630/14/10/103035], the single-loop multiple-pulse scheme [E. Herterich and E. Sjöqvist, Phys. Rev. A 94, 052310 (2016), 10.1103/PhysRevA.94.052310], and the off-resonance single-shot scheme [G. F. Xu et al., Phys. Rev. Lett. 92, 052302 (2015), 10.1103/PhysRevLett.92.052302; E. Sjöqvist, Phys. Lett. A 380, 65 (2016), 10.1016/j.physleta.2015.10.006]. Whereas both the single-loop multiple-pulse and single-shot schemes aim to improve the robustness of the original two-loop scheme by shortening the exposure to decoherence, we find here that the two-loop scheme is more robust to systematic errors in the Rabi frequencies. More importantly, we derive conditions under which the resilience to this kind of error can be optimized, thereby strengthening the robustness of nonadiabatic holonomic gates.
Abdominal wall blocks in adults
Børglum, Jens; Gögenür, Ismail; Bendtsen, Thomas F
2016-01-01
Purpose of review Abdominal wall blocks in adults have evolved much during the last decade; that is, particularly with the introduction of ultrasound-guided (USG) blocks. This review highlights recent advances of block techniques within this field and proposes directions for future research....... Recent findings Ultrasound guidance is now considered the golden standard for abdominal wall blocks in adults, even though some landmark-based blocks are still being investigated. The efficiency of USG transversus abdominis plane blocks in relation to many surgical procedures involving the abdominal wall...... been introduced with success. Future research should also investigate the effect of specific abdominal wall blocks on neuroendocrine and inflammatory stress response after surgery. Summary USG abdominal wall blocks in adults are commonplace techniques today. Most abdominal wall blocks are assigned...
Recovery from blocking between outcomes.
Wheeler, Daniel S; Miller, Ralph R
2005-10-01
Contemporary associative learning research largely focuses on cue competition phenomena that occur when 2 cues are paired with a common outcome. Little research has been conducted to investigate similar phenomena occurring when a single cue is trained with 2 outcomes. Three conditioned lick suppression experiments with rats assessed whether treatments known to alleviate blocking between cues would also attenuate blocking between outcomes. In Experiment 1, conditioned responding recovered from blocking between outcomes when a long retention interval was interposed between training and testing. Experiment 2 obtained recovery from blocking between outcomes when the blocking outcome was extinguished after the blocking treatment. In Experiment 3, a recovery from blocking between outcomes occurred when a reminder stimulus was presented in a novel context prior to testing. Collectively, these studies demonstrate that blocking of outcomes, like blocking of cues, appears to be caused by a deficit in the expression of an acquired association.
SUPERFICIAL CERVICAL PLEXUS BLOCK
Komang Mega Puspadisari
2014-01-01
Full Text Available Superficial cervical plexus block is one of the regional anesthesia in neck were limited to thesuperficial fascia. Anesthesia is used to relieve pain caused either during or after the surgery iscompleted. This technique can be done by landmark or with ultrasound guiding. The midpointof posterior border of the Sternocleidomastoid was identified and the prosedure done on thatplace or on the level of cartilage cricoid.
Cameron, Peter; Scown, Paul; Campbell, Donald
2002-01-01
There is pessimism regarding the ability of the Acute Health Sector to manage access block for emergency and elective patients. Melbourne Health suffered an acute bed crisis in 2001 resulting in record ambulance diversions and emergency department (ED) delays. We conducted an observational study to reduce access block for emergency patients whilst maintaining elective throughput at Melbourne Health. This involved a clinician-led taskforce using previously proven principles for organisational change to implement 51 actions to improve patient access over a three-month period. The primary outcome measures were ambulance diversion, emergency patients waiting more than 12 hours for an inpatient bed, elective throughput and theatre cancellations. Despite a reduction in multi-day bed numbers all primary objectives were met, ambulance diversion decreased to minimal levels, 12-hour waits decreased by 40% and elective throughput was maintained. Theatre cancellations were also minimised. We conclude that access block can be improved by clinician-led implementation of proven process improvements over a short time frame. The ability to sustain change over the longer term requires further study.
E-Block: A Tangible Programming Tool with Graphical Blocks
Danli Wang
2013-01-01
Full Text Available This paper designs a tangible programming tool, E-Block, for children aged 5 to 9 to experience the preliminary understanding of programming by building blocks. With embedded artificial intelligence, the tool defines the programming blocks with the sensors as the input and enables children to write programs to complete the tasks in the computer. The symbol on the programming block's surface is used to help children understanding the function of each block. The sequence information is transferred to computer by microcomputers and then translated into semantic information. The system applies wireless and infrared technologies and provides user with feedbacks on both screen and programming blocks. Preliminary user studies using observation and user interview methods are shown for E-Block's prototype. The test results prove that E-Block is attractive to children and easy to learn and use. The project also highlights potential advantages of using single chip microcomputer (SCM technology to develop tangible programming tools for children.
On the connectivity of the realization spaces of line arrangements
Nazir, Shaheen
2010-01-01
We prove that under certain combinatorial conditions, the realization spaces of line arrangements on the complex projective plane are connected. We also give several examples of arrangements with eight, nine and ten lines which have disconnected realization spaces.
Realism in the Realized Popper's Experiment
Hunter, Geoffrey
2002-12-01
The realization of Karl Popper's EPR-like experiment by Shih and Kim (published 1999) produced the result that Popper hoped for: no ``action at a distance'' on one photon of an entangled pair when a measurement is made on the other photon. This experimental result is interpretable in local realistic terms: each photon has a definite position and transverse momentum most of the time; the position measurement on one photon (localization within a slit) disturbs the transverse momentum of that photon in a non-predictable way in accordance with the uncertainty principle; however, there is no effect on the other photon (the photon that is not in a slit) no action at a distance. The position measurement (localization within a slit) of the one photon destroys the coherence (entanglement) between the photons; i.e. decoherence occurs. This realistic (albeit retrodictive) interpretation of the Shih-Kim realization of what Popper called his ``crucial experiment'' is in accord with Bohr's original concept of the nature of the uncertainty principle, as being an inevitable effect of the disturbance of the measured system by the measuring apparatus. In this experiment the impact parameter of an incident photon with the centerline of the slit is an uncontrollable parameter of each individual photon scattering event; this impact parameter is variable for every incident photon, the variations being a statistical aspect of the beam of photons produced by the experimental arrangement. These experimental results are also in accord with the proposition of Einstein, Podolski and Rosen's 1935 paper: that quantum mechanics provides only a statistical, physically incomplete, theory of microscopic physical processes, for the quantum mechanical description of the experiment does not describe or explain the individual photon scattering events that are actually observed; the angle by which an individual photon is scattered is not predictable, because the photon's impact parameter with the
Liu, Xikui; Stamm, Manfred
2009-01-01
Realizing the vast technological potential of patternable block copolymers requires both the precise controlling of the orientation and long-range ordering, which is still a challenging topic so far...
Efficient Realization of BCD Multipliers Using FPGAs
Shuli Gao
2017-01-01
Full Text Available In this paper, a novel BCD multiplier approach is proposed. The main highlight of the proposed architecture is the generation of the partial products and parallel binary operations based on 2-digit columns. 1 × 1-digit multipliers used for the partial product generation are implemented directly by 4-bit binary multipliers without any code conversion. The binary results of the 1 × 1-digit multiplications are organized according to their two-digit positions to generate the 2-digit column-based partial products. A binary-decimal compressor structure is developed and used for partial product reduction. These reduced partial products are added in optimized 6-LUT BCD adders. The parallel binary operations and the improved BCD addition result in improved performance and reduced resource usage. The proposed approach was implemented on Xilinx Virtex-5 and Virtex-6 FPGAs with emphasis on the critical path delay reduction. Pipelined BCD multipliers were implemented for 4 × 4, 8 × 8, and 16 × 16-digit multipliers. Our realizations achieve an increase in speed by up to 22% and a reduction of LUT count by up to 14% over previously reported results.
The impact of voice on speech realization
Jelka Breznik
2014-12-01
Full Text Available The study discusses spoken literary language and the impact of voice on speech realization. The voice consists of a sound made by a human being using the vocal folds for talking, singing, laughing, crying, screaming… The human voice is specifically the part of human sound production in which the vocal folds (vocal cords are the primary sound source. Our voice is our instrument and identity card. How does the voice (voice tone affect others and how do they respond, positively or negatively? How important is voice (voice tone in communication process? The study presents how certain individuals perceive voice. The results of the research on the relationships between the spoken word, excellent speaker, voice and description / definition / identification of specific voices done by experts in the field of speech and voice as well as non-professionals are presented. The study encompasses two focus groups. One consists of amateurs (non-specialists in the field of speech or voice who have no knowledge in this field and the other consists of professionals who work with speech or language or voice. The questions were intensified from general to specific, directly related to the topic. The purpose of such a method of questioning was to create relaxed atmosphere, promote discussion, allow participants to interact, complement, and to set up self-listening and additional comments.
Worldsheet realization of the refined topological string
Antoniadis, I., E-mail: ignatios.antoniadis@cern.ch [Department of Physics, CERN – Theory Division, CH-1211 Geneva 23 (Switzerland); Florakis, I., E-mail: florakis@mppmu.mpg.de [Max-Planck-Institut für Physik, Werner-Heisenberg-Institut, 80805 München (Germany); Hohenegger, S., E-mail: stefan.hohenegger@cern.ch [Department of Physics, CERN – Theory Division, CH-1211 Geneva 23 (Switzerland); Narain, K.S., E-mail: narain@ictp.trieste.it [High Energy Section, The Abdus Salam International Center for Theoretical Physics, Strada Costiera, 11-34014 Trieste (Italy); Zein Assi, A., E-mail: zeinassi@cern.ch [Department of Physics, CERN – Theory Division, CH-1211 Geneva 23 (Switzerland); Centre de Physique Théorique (UMR CNRS 7644), Ecole Polytechnique, 91128 Palaiseau (France)
2013-10-01
A worldsheet realization of the refined topological string is proposed in terms of physical string amplitudes that compute generalized N=2 F-terms of the form F{sub g,n}W{sup 2g}ϒ{sup 2n} in the effective supergravity action. These terms involve the chiral Weyl superfield W and a superfield ϒ defined as an N=2 chiral projection of a particular anti-chiral T{sup ¯}-vector multiplet. In Heterotic and Type I theories, obtained upon compactification on the six-dimensional manifold K3×T{sup 2}, T is the usual Kähler modulus of the T{sup 2} torus. These amplitudes are computed exactly at the one-loop level in string theory. They are shown to reproduce the correct perturbative part of the Nekrasov partition function in the field theory limit when expanded around an SU(2) enhancement point of the string moduli space. The two deformation parameters ϵ{sub −} and ϵ{sub +} of the Ω supergravity background are then identified with the constant field strength backgrounds for the anti-self-dual graviphoton and self-dual gauge field of the T{sup ¯} vector multiplet, respectively.
Realism in the Realized Popper's Experiment
Hunter, G
2005-01-01
The realization of Karl Popper's experiment by Shih and Kim (published 1999) produced the result that Popper hoped for: no ``action at a distance'' on one photon of an entangled pair when a measurement is made on the other photon. This experimental result is interpretable in local realistic terms: each photon has a definite position and transverse momentum most of the time; the position measurement on one photon (localization in a slit) disturbs the transverse momentum of that photon in a non-predictable way in accordance with the uncertainty principle; however, there is no effect on the other photon (the photon that is not in a slit) no action at a distance. The position measurement (localization within a slit) of the one photon destroys the coherence (entanglement) between the photons; i.e. decoherence occurs. This can be understood physically as an electromagnetic interaction between the photon in the slit and the electrons of the atoms in the surface of the solid that forms the slit.
Realizing the promise of breast cancer vaccines
Jackson E
2012-08-01
Full Text Available Erica Jackson, Hatem SolimanUniversity of South Florida/Moffitt Cancer Center and Research Institute, Tampa, FL, USAAbstract: Breast cancer vaccines are being developed to stimulate adaptive antitumor immune responses in patients. These vaccines have the potential to treat breast cancer with minimal side effects and toxicity. However, many obstacles still need to be overcome to fully realize the vaccines' clinical benefit. A review of the literature was conducted to assess the use of vaccines in targeting transformed cells. Four vaccines currently under study were discussed, each summarizing the different vaccine platforms used to introduce target antigen to the patient's immune system. The advantages and disadvantages of each method were discussed, although no one method was found to be superior. Additional issues addressed included overcoming tumor-induced immunosuppression, immune evasion of transformed cells, the use of vaccines in combination therapy, and the challenges of using these vaccines in various clinical settings. Vaccines may be most effective in patients with minimal residual disease, as opposed to using them in the metastatic setting. Also, specific clinical trial design considerations for the use of vaccines in cancer patients, such as time-to-failure end points, were discussed. Understanding these various elements will be important to the translation of breast cancer vaccine therapy into routine clinical practice.Keywords: breast cancer, vaccine, immunotherapy, immune tolerance, peptide vaccine, dendritic cell vaccine
Realization and performance of cryogenic selection mechanisms
Aitink-Kroes, Gabby; Bettonvil, Felix; Kragt, Jan; Elswijk, Eddy; Tromp, Niels
2014-07-01
Within Infra-Red large wavelength bandwidth instruments the use of mechanisms for selection of observation modes, filters, dispersing elements, pinholes or slits is inevitable. The cryogenic operating environment poses several challenges to these cryogenic mechanisms; like differential thermal shrinkage, physical property change of materials, limited use of lubrication, high feature density, limited space etc. MATISSE the mid-infrared interferometric spectrograph and imager for ESO's VLT interferometer (VLTI) at Paranal in Chile coherently combines the light from 4 telescopes. Within the Cold Optics Bench (COB) of MATISSE two concepts of selection mechanisms can be distinguished based on the same design principles: linear selection mechanisms (sliders) and rotating selection mechanisms (wheels).Both sliders and wheels are used at a temperature of 38 Kelvin. The selection mechanisms have to provide high accuracy and repeatability. The sliders/wheels have integrated tracks that run on small, accurately located, spring loaded precision bearings. Special indents are used for selection of the slider/wheel position. For maximum accuracy/repeatability the guiding/selection system is separated from the actuation in this case a cryogenic actuator inside the cryostat. The paper discusses the detailed design of the mechanisms and the final realization for the MATISSE COB. Limited lifetime and performance tests determine accuracy, warm and cold and the reliability/wear during life of the instrument. The test results and further improvements to the mechanisms are discussed.
On the RS2 realization of unparticles
Friedland, Alexander; Graesser, Michael
2009-01-01
To facilitate the study of the unparticle scenario it is very desirable to have a treatable model realizing it in four dimensions. Motivated by the general idea of the AdS/CFT correspondence, we consider a simple construction: the Randall-Sundrum 2 (single brane) setup with the Standard Model fields on the brane and a massive vector field in the warped bulk. We show that in this model the known properties of vector unparticles -- the nontrivial phase of the CFT propagator, the necessity and dominance of contact interactions, the unitarity constraint on the conformal dimension of the operator, and the tensor structure dictated by conformal symmetry -- follow by simple inspection of the brane-to-brane propagator. The phase has a physical interpretation as controlling the rate of escape of unparticles into the extra dimension. Requiring the correct sign for the imaginary part of the longitudinal polarization of the propagator, we obtain the flat-space unitarity condition m_5^2 > = 0. This condition carries uncha...
NSGIC GIS Inventory (aka Ramona) — A polygon feature class of Miami-Dade Census 2000 Blocks. Census blocks are areas bounded on all sides by visible and/or invisible features shown on a map prepared...
NSGIC Local Govt | GIS Inventory — A polygon feature class of Miami-Dade Census 2000 Blocks. Census blocks are areas bounded on all sides by visible and/or invisible features shown on a map prepared...
Ear - blocked at high altitudes
High altitudes and blocked ears; Flying and blocked ears; Eustachian tube dysfunction - high altitude ... eustachian tube is a connection between the middle ear (the space deep to the eardrum) and the ...
Habitat Blocks and Wildlife Corridors
Vermont Center for Geographic Information — Habitat blocks are areas of contiguous forest and other natural habitats that are unfragmented by roads, development, or agriculture. Vermonts habitat blocks are...
Appropriate schemata and building blocks
Yang Haijun; Li Minqiang
2005-01-01
Appropriate schemata as a novel concept to characterize building blocks are introduced, and then, the traits of appropriate schemata are presented. The effects of building blocks by search operators are analyzed. Hence, the experiments on RR-8X8 are employed to verify that appropriate schemata construct the building blocks. The validity of appropriate schemata and building blocks from the views of theory and practice is presented.
Properties of blocked linear systems.
Chen, Weitian; Anderson, Brian D O; Deistler, Manfred; Filler, Alexander
2012-10-01
This paper presents a systematic study on the properties of blocked linear systems that have resulted from blocking discrete-time linear time invariant systems. The main idea is to explore the relationship between the blocked and the unblocked systems. Existing results are reviewed and a number of important new results are derived. Focus is given particularly on the zero properties of the blocked system as no such study has been found in the literature.
Porous block nanofiber composite filters
Ginley, David S.; Curtis, Calvin J.; Miedaner, Alexander; Weiss, Alan J.; Paddock, Arnold
2016-08-09
Porous block nano-fiber composite (110), a filtration system (10) and methods of using the same are disclosed. An exemplary porous block nano-fiber composite (110) includes a porous block (100) having one or more pores (200). The porous block nano-fiber composite (110) also includes a plurality of inorganic nano-fibers (211) formed within at least one of the pores (200).
Massive hemothorax: A rare complication after supraclavicular brachial plexus block.
Singh, Shiv Kumar; Katyal, Surabhi; Kumar, Amit; Kumar, Pawan
2014-01-01
Plexus block is the preferred anesthesia plan for upper limb surgeries. Among the known complications, hematoma formation following the vascular trauma is often occur but this complication is frequently underreported. We present a case where a massive hemothorax developed post operatively in a patient who underwent resection of giant cell tumor of the right hand radius bone followed by arthroplasty under brachial plexus block using supraclavicular approach. This case report attempts to highlight the essence of remaining vigilant postoperatively for first initial days after brachial plexus block, especially after failed or multiple attempts. Ultrasound guided technique in combination with nerve stimulator has proven to be more reliable and safer than traditional techniques.
Property Blocks: Games and Activities.
Humphreys, Alan, Ed.; Dailey, Jean, Ed.
This pamphlet describes the property blocks produced by MINNEMAST, and discusses their use in the development of thinking processes. Classification systems, including block diagrams and tree diagrams, are discussed. Sixteen classroom activities and eleven games which use the blocks are described. Suggestions to the teacher for further reading are…
AstroSat: From Inception to Realization and Launch
P. C. Agrawal
2017-06-01
The origin of the idea of AstroSat multi wavelength satellite mission and how it evolved over the next 15 years from a concept to the successful development of instruments for giving concrete shape to this mission, is recounted in this article. AstroSat is the outcome of intense deliberations in the Indian astronomy community leading to a consensus for a multi wavelength Observatory having broad spectral coverage over five decades in energy covering near-UV, far-UV, soft X-ray and hard X-ray bands. The multi wavelength observation capability of AstroSat with a suite of 4 co-aligned instruments and an X-ray sky monitor on a single satellite platform, imparts a unique character to this mission. AstroSat owes its realization to the collaborative efforts of the various ISRO centres, several Indian institutions, and a few institutions abroad which developed the 5 instruments and various sub systems of the satellite. AstroSat was launched on September 28, 2015 from India in a near equatorial 650 km circular orbit. The instruments are by and large working as planned and in the past 14 months more than 200 X-ray and UV sources have been studied with it. The important characteristics of AstroSat satellite and scientific instruments will be highlighted.
External plans for radiological emergency; Plan de emergencia radiologica externo
Suarez, G.; Vizuet G, J.; Benitez S, J.A. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)
1999-07-01
Since 1989, the National Institute of Nuclear Research in Mexico shares in the task of Food and Water Control corresponding to the FT-86 task force of External Plans for Radiological Emergency (PERE), in charge of the Veracruz Health Services. In the PERE preparation stage previous actions are necessary developed for the preparation and updating of this plan and the task organization with the purpose to maintaining standing and operable in any time and circumstance, the capability to response in the face of an emergency. This stage englobes activities which must be realized before to carry out the Plan as they are the specialized training of personnel which participates and the execution of exercises and simulacrums. Until 1998, training and exercises for this task had been realized under diverse possible sceneries but in conditions that simulated the presence of radioactive material. For this reason, it should be emphasized the training realized during the days 6th, 7th, 8th July, 1999, in the emergency planning zone of the Plan, which to carry out using radioactive material. The National Institute of Nuclear Research had in charge of the training. This work describes all the activities for the realization of this training. (Author)
The Semantic Web: From Representation to Realization
Thórisson, Kristinn R.; Spivack, Nova; Wissner, James M.
A semantically-linked web of electronic information - the Semantic Web - promises numerous benefits including increased precision in automated information sorting, searching, organizing and summarizing. Realizing this requires significantly more reliable meta-information than is readily available today. It also requires a better way to represent information that supports unified management of diverse data and diverse Manipulation methods: from basic keywords to various types of artificial intelligence, to the highest level of intelligent manipulation - the human mind. How this is best done is far from obvious. Relying solely on hand-crafted annotation and ontologies, or solely on artificial intelligence techniques, seems less likely for success than a combination of the two. In this paper describe an integrated, complete solution to these challenges that has already been implemented and tested with hundreds of thousands of users. It is based on an ontological representational level we call SemCards that combines ontological rigour with flexible user interface constructs. SemCards are machine- and human-readable digital entities that allow non-experts to create and use semantic content, while empowering machines to better assist and participate in the process. SemCards enable users to easily create semantically-grounded data that in turn acts as examples for automation processes, creating a positive iterative feedback loop of metadata creation and refinement between user and machine. They provide a holistic solution to the Semantic Web, supporting powerful management of the full lifecycle of data, including its creation, retrieval, classification, sorting and sharing. We have implemented the SemCard technology on the semantic Web site Twine.com, showing that the technology is indeed versatile and scalable. Here we present the key ideas behind SemCards and describe the initial implementation of the technology.
Experimental realization of quantum random number generator
Soubusta, Jan; Haderka, Ondrej; Hendrych, Martin; Pavlicek, Pavel
2003-11-01
We present our experimental realization of a quantum random number generator (RNG) based on the quantum random process of division of light pulse on a fiber coupler. Our prototype consists of fiber optics elements: a pigtailcd laser diode, two mechanical attenuators, a fiber coupler, and two single photon detectors. The RNG contains all necessary electronics for the generation of light pulses, synchronized reading of detectors' states, processing of these results, and transfer of data to a host computer. The connection to the computer is done via a 25-pin parallel port, that makes our device easy to use with any personal computer (PC). The RNG can be operated in four different modes, that arc selected by the PC. The zeroth mode is just for the device control, the first mode serves for appropriate setting of generation efficiency, the second mode is designed for raw data sequence generation at a rate of 114 kByte/s, and the last mode provides balanced data sequence at a rate of 28 kByte/s utilizing von Ncumann's extraction procedure. This procedure is used to gain a properly balanced ratio between '0's and '1's. The balanced data sequence generated by the RNG in the third mode passes all kinds of tests we arc using [for example 15 tests proposed by G. Marsaglia, WWW: http://stat.fsu.edu/ geo/diehard.html 1. The raw data sequence can be used for purposes that do not need properly balanced data, because raw data passes tests that arc not inspecting the sequence balance.
A. Yeşil
2011-09-01
Full Text Available The voltage differencing transconductance amplifier (VDTA is a recently introduced active element for analog signal processing. However, the realization of VDTA is not given by any author yet. In this work, a new and simple CMOS realization of VDTA is presented. The proposed block has two voltage inputs and two kinds of current output, so it is functional for voltage- and transconductance-mode operation. Furthermore, VDTA exhibits two different values of transconductance so that there is no need to external resistors for VDTA based applications which seems to be a good advantage for analog circuit designer. A CMOS implementation of VDTA and a voltage-mode VDTA based filter are proposed and simulated. An application example of fourth order flat-band band-pass amplifier is given and the performance of the circuit is demonstrated by comparing the theory and simulation.
Towards electromechanical computation: An alternative approach to realize complex logic circuits
Hafiz, M. A. A.
2016-08-18
Electromechanical computing based on micro/nano resonators has recently attracted significant attention. However, full implementation of this technology has been hindered by the difficulty in realizing complex logic circuits. We report here an alternative approach to realize complex logic circuits based on multiple MEMS resonators. As case studies, we report the construction of a single-bit binary comparator, a single-bit 4-to-2 encoder, and parallel XOR/XNOR and AND/NOT logic gates. Toward this, several microresonators are electrically connected and their resonance frequencies are tuned through an electrothermal modulation scheme. The microresonators operating in the linear regime do not require large excitation forces, and work at room temperature and at modest air pressure. This study demonstrates that by reconfiguring the same basic building block, tunable resonator, several essential complex logic functions can be achieved.
Towards electromechanical computation: An alternative approach to realize complex logic circuits
Hafiz, M. A. A.; Kosuru, L.; Younis, M. I.
2016-08-01
Electromechanical computing based on micro/nano resonators has recently attracted significant attention. However, full implementation of this technology has been hindered by the difficulty in realizing complex logic circuits. We report here an alternative approach to realize complex logic circuits based on multiple MEMS resonators. As case studies, we report the construction of a single-bit binary comparator, a single-bit 4-to-2 encoder, and parallel XOR/XNOR and AND/NOT logic gates. Toward this, several microresonators are electrically connected and their resonance frequencies are tuned through an electrothermal modulation scheme. The microresonators operating in the linear regime do not require large excitation forces, and work at room temperature and at modest air pressure. This study demonstrates that by reconfiguring the same basic building block, tunable resonator, several essential complex logic functions can be achieved.
Preparations for the IGS realization of ITRF2014
Rebischung, Paul; Schmid, Ralf
2016-04-01
The International GNSS Service (IGS) currently prepares its own realization, called IGS14, of the latest release of the International Terrestrial Reference Frame (ITRF2014). This preparation involves: - a selection of the most suitable reference frame (RF) stations from the complete set of GNSS stations in ITRF2014; - the design of a well-distributed core network of RF stations for the purpose of aligning global GNSS solutions; - a re-evaluation of the GPS and GLONASS satellite antenna phase center offsets (PCOs), based on the SINEX files provided by the IGS Analysis Centers (ACs) in the frame of the second IGS reprocessing campaign repro2. This presentation will first cover the criteria used for the selection of the IGS14 and IGS14 core RF stations as well as preliminary station selection results. We will then use the preliminary IGS14 RF to re-align the daily IGS combined repro2 SINEX solutions and study the impact of the RF change on GNSS-derived geodetic parameter time series. In a second part, we will focus on the re-evaluation of the GNSS satellite antenna PCOs. A re-evaluation of at least their radial (z) components is indeed required, despite the negligible scale difference between ITRF2008 and ITRF2014, because of modeling changes recently introduced within the IGS which affect the scale of GNSS terrestrial frames (Earth radiation pressure, antenna thrust). Moreover, the 13 GPS and GLONASS satellites launched since September 2012 are currently assigned preliminary block-specific mean PCO values which need to be updated. From the daily AC repro2 SINEX files, we will therefore derive time series of satellite z-PCO estimates and analyze the resulting time series. Since several ACs provided all three components of the satellite PCOs in their SINEX files, we will additionally derive similar x- and y-PCO time series and discuss the relevance of their potential re-evaluation.
Towards team formation via automated planning
Muise, Christian; Dignum, Frank; Felli, Paolo; Miller, Tim; Pearce, Adrian R.; Sonenberg, Liz
2016-01-01
Cooperative problem solving involves four key phases: (1) finding potential members to form a team, (2) forming the team, (3) formulating a plan for the team, and (4) executing the plan. We extend recent work on multi-agent epistemic planning and apply it to the problem of team formation in a blocks
Realizing e-government benefits with minimal capabilities
Pedersen, Keld
2017-01-01
that are not dealt with by existing literature were identified: 1) Benefits realization requires not just organizational capabilities, but also inter-organizational capabilities, 2) Coordination of benefits realization across organizational units, local and central government and across internal organizational...... levels is both essential and very challenging, 3) Managing benefits realization include much more than integrating benefits realization practices in IT projects, 4) Different benefits realization practices are needed at central government level, local management level and case worker level, 5) Different...... but to fully automate processes the reliance on formal benefits realization practices is decreased. Research limitations/implications — The findings are based on single case. Originality/value — There is only little empirical research studying benefits realization in a public sector context. Furthermore...
Niimi, Hirofumi; Koike, Minoru; Takeuchi, Seiichi; Douhara, Noriyoshi
2007-12-01
Humanoid by ROBO-BLOCK (robot block system) and the rational formula of robots were proposed. ROBO-BLOCK is composed of servo motors, the parts for servomotor rotor, the brackets for servomotor fixation, the board parts and the controllers. A robot can be assembled easily by ROBO-BLOCK. Meanwhile, it is convenient when the structure of the robot can be described easily as a character. The whole structure of the robot is expressed as rational formula of the robot to show molecule structure in chemistry. ROBO-BLOCK can be useful for not only the research but also the education. Creative student experiment was done in the college of industrial technology.
Radix-3 Algorithm for Realization of Type-II Discrete Sine Transform
M. N. Murty
2015-06-01
Full Text Available In this paper, radix-3 algorithm for computation of type-II discrete sine transform (DST-II of length N = 3 ( = 1,2, … . is presented. The DST-II of length N can be realized from three DST-II sequences, each of length N/3. A block diagram of for computation of the radix-3 DST-II algorithm is given. Signal flow graph for DST-II of length = 3 2 is shown to clarify the proposed algorithm.
Dimitrov, Nikola; Koteski, Cane
2016-01-01
The professional book ,, Space planning "processed chapters on: space, concept and definition of space, space as a system, spatial economics, economic essence of space, space planning, social determinants of spatial planning, spatial planning as a process, factors development and elements in spatial planning, methodology, components and content of spatial planning stages and types of preparation of spatial planning, spatial planning and industrialization, industrialization, urbanization and s...
Dimitrov, Nikola; Koteski, Cane
2016-01-01
The professional book ,, Space planning "processed chapters on: space, concept and definition of space, space as a system, spatial economics, economic essence of space, space planning, social determinants of spatial planning, spatial planning as a process, factors development and elements in spatial planning, methodology, components and content of spatial planning stages and types of preparation of spatial planning, spatial planning and industrialization, industrialization, urbanization and s...
Scheler, Fabian; Mitzlaff, Martin; Schröder-Preikschat, Wolfgang
Die Entscheidung, einen zeit- bzw. ereignisgesteuerten Ansatz für ein Echtzeitsystem zu verwenden, ist schwierig und sehr weitreichend. Weitreichend vor allem deshalb, weil diese beiden Ansätze mit äußerst unterschiedlichen Kontrollflussabstraktionen verknüpft sind, die eine spätere Migration zum anderen Paradigma sehr schwer oder gar unmöglich machen. Wir schlagen daher die Verwendung einer Zwischendarstellung vor, die unabhängig von der jeweils verwendeten Kontrollflussabstraktion ist. Für diesen Zweck verwenden wir auf Basisblöcken basierende Atomic Basic Blocks (ABB) und bauen darauf ein Werkzeug, den Real-Time Systems Compiler (RTSC) auf, der die Migration zwischen zeit- und ereignisgesteuerten Systemen unterstützt.
Spintronics: Conceptual Building Blocks
Ansermet, J.-Ph.
The purpose of this introduction to spintronics is to provide some elementary description of its conceptual building blocks. Thus, it is intended for a newcomer to the field. After recalling rudimentary descriptions of spin precession and spin relaxation, spin-dependent transport is treated within the Boltzmann formalism. This suffices to introduce key notions such as the spin asymmetry of the conductivities in the two-current model, the spin diffusion length, and spin accumulation. Two basic mechanisms of spin relaxation are then presented, one arising from spin-orbit scattering and the other from electron-magnon collisions. Finally, the action of a spin-polarized current on magnetization is presented in a thermodynamics framework. This introduces the notion of spin torque and the characteristic length scale over which the transverse spin polarization of conduction electron decays as it is injected into a magnet.
Dorbolo, Stephane; Adami, Nicolas; Grasp Team
2014-11-01
The motion of ice discs released at the surface of a thermalized bath was investigated. As observed in some rare events in the Nature, the discs start spinning spontaneously. The motor of this motion is the cooling of the water close to the ice disc. As the density of water is maximum at 4°C, a downwards flow is generated from the surface of the ice block to the bottom. This flow generates the rotation of the disc. The speed of rotation depends on the mass of the ice disc and on the temperature of the bath. A model has been constructed to study the influence of the temperature of the bath. Finally, ice discs were put on a metallic plate. Again, a spontaneous rotation was observed. FNRS is thanked for financial support.
Akinci, Devrim [Department of Radiology, Hacettepe University School of Medicine, Sihhiye, 06100 Ankara (Turkey); Akhan, Okan [Department of Radiology, Hacettepe University School of Medicine, Sihhiye, 06100 Ankara (Turkey)]. E-mail: oakhan@hacettepe.edu.tr
2005-09-01
Pain occurs frequently in patients with advanced cancers. Tumors originating from upper abdominal viscera such as pancreas, stomach, duodenum, proximal small bowel, liver and biliary tract and from compressing enlarged lymph nodes can cause severe abdominal pain, which do not respond satisfactorily to medical treatment or radiotherapy. Percutaneous celiac ganglia block (CGB) can be performed with high success and low complication rates under imaging guidance to obtain pain relief in patients with upper abdominal malignancies. A significant relationship between pain relief and degree of tumoral celiac ganglia invasion according to CT features was described in the literature. Performing the procedure in the early grades of celiac ganglia invasion on CT can increase the effectiveness of the CGB, which is contrary to World Health Organization criteria stating that CGB must be performed in patients with advanced stage cancer. CGB may also be effectively performed in patients with chronic pancreatitis for pain palliation.
Hanberg, Peter Jesper; Jørgensen, Anders Michael
2014-01-01
it directcompetitive with fossil energy sources a further reduction is needed. By increasing the efficiency of the solar cells one gain an advantage through the whole chain of cost. So that per produced Watt of power less material is spent, installation costs are lower, less area is used etc. With an average...... efficiency of about 15% for commercial Silicon solar cells there is still much to gain. DTU Danchip provides research facilities, equipment and expertise for the building blocks that comprises fabricating the efficient solar cell. In order to get more of the sun light into the device we provide thin film......Photovoltaics (PV), better known as solar cells, are now a common day sight on many rooftops in Denmark.The installed capacity of PV systems worldwide is growing exponentially1 and is the third most importantrenewable energy source today. The cost of PV is decreasing fast with ~10%/year but to make...
Strategies for Controlled Placement of Nanoscale Building Blocks
Koh SeongJin
2007-01-01
Full Text Available AbstractThe capability of placing individual nanoscale building blocks on exact substrate locations in a controlled manner is one of the key requirements to realize future electronic, optical, and magnetic devices and sensors that are composed of such blocks. This article reviews some important advances in the strategies for controlled placement of nanoscale building blocks. In particular, we will overview template assisted placement that utilizes physical, molecular, or electrostatic templates, DNA-programmed assembly, placement using dielectrophoresis, approaches for non-close-packed assembly of spherical particles, and recent development of focused placement schemes including electrostatic funneling, focused placement via molecular gradient patterns, electrodynamic focusing of charged aerosols, and others.
The realization problem for positive and fractional systems
Kaczorek, Tadeusz
2014-01-01
This book addresses the realization problem of positive and fractional continuous-time and discrete-time linear systems. Roughly speaking the essence of the realization problem can be stated as follows: Find the matrices of the state space equations of linear systems for given their transfer matrices. This first book on this topic shows how many well-known classical approaches have been extended to the new classes of positive and fractional linear systems. The modified Gilbert method for multi-input multi-output linear systems, the method for determination of realizations in the controller canonical forms and in observer canonical forms are presented. The realization problem for linear systems described by differential operators, the realization problem in the Weierstrass canonical forms and of the descriptor linear systems for given Markov parameters are addressed. The book also presents a method for the determination of minimal realizations of descriptor linear systems and an extension for cone linear syste...
Lin, W
2001-12-01
This report documents the Large-Block Test (LBT) conducted at Fran Ridge near Yucca Mountain, Nevada. The LBT was a thermal test conducted on an exposed block of middle non-lithophysal Topopah Spring tuff (Tptpmn) and was designed to assist in understanding the thermal-hydrological-mechanical-chemical (THMC) processes associated with heating and then cooling a partially saturated fractured rock mass. The LBT was unique in that it was a large (3 x 3 x 4.5 m) block with top and sides exposed. Because the block was exposed at the surface, boundary conditions on five of the six sides of the block were relatively well known and controlled, making this test both easier to model and easier to monitor. This report presents a detailed description of the test as well as analyses of the data and conclusions drawn from the test. The rock block that was tested during the LBT was exposed by excavation and removal of the surrounding rock. The block was characterized and instrumented, and the sides were sealed and insulated to inhibit moisture and heat loss. Temperature on the top of the block was also controlled. The block was heated for 13 months, during which time temperature, moisture distribution, and deformation were monitored. After the test was completed and the block cooled down, a series of boreholes were drilled, and one of the heater holes was over-cored to collect samples for post-test characterization of mineralogy and mechanical properties. Section 2 provides background on the test. Section 3 lists the test objectives and describes the block site, the site configuration, and measurements made during the test. Section 3 also presents a chronology of events associated with the LBT, characterization of the block, and the pre-heat analyses of the test. Section 4 describes the fracture network contained in the block. Section 5 describes the heating/cooling system used to control the temperature in the block and presents the thermal history of the block during the test
The Realization of Mass Customization Using Modularization Method
无
2002-01-01
In the view of the comparison of Mass Customization ( MC) with Mass Production and Customization Production, the objectives of MC are analyzed. It is pointed out that the core objectives of MC are to realize in dividuation customization, low cost, quick response to market demands. The modul arization theory is simply introduced. Based on the characteristics of modular ization, the mechanism of realizing MC with modularization is analyzed. The in dividuation customization can be realized with the diffe...
Recolonizing wolves influence the realized niche of resident cougars
Elbroch, L Mark; Lendrum, Patrick E; Newby, Jesse; Quigley, Howard; Thompson, Daniel J
2015-01-01
.... We tested for new competition between reintroduced wolves and resident cougars in the Southern Yellowstone Ecosystem to assess whether wolves might be impacting the realized niche of sympatric...
Realized Bond-Stock Correlation: Macroeconomic Announcement Effects
Christiansen, Charlotte; Ranaldo, Angelo
2005-01-01
We investigate the effects of macroeconomic announcements on the realized correlation between bond and stock returns. Our results deliver insights into the dominating drivers of bond-stock comovements. We find that it is not so much the surprise component of the announcement, but the mere fact...... that an announcement occurs that influences the realized bond-stock correlation. The impact of macroeconomic announcements varies across the business cycle. Announcement effects are highly dependent on the sign of the realized bond-stock correlation which has recently gone from positive to negative. Macroeconomic...... announcement effects on realized bond and stock volatilities are also investigated....
Realization of Two-Qutrit Quantum Gates with Control Pulses
ZHANG Jie; DI Yao-Min; WEI Hai-Rui
2009-01-01
We investigate the realization of 2-qutrit logic gate in a bipartite 3-level system with qusi-Ising interaction. On the basis of Caftan decomposition of matrices, the unitary matrices of 2-qutrit are factorized into products of a series of realizable matrices. It is equivalent to exerting a certain control field on the system, and the control goal is usually gained by a sequence of control pulses. The general discussion on the realization of 2-qutrit logic gate is made first, and then the realization of the ternary SWAP gate and the ternary gate are discussed specifically, and the sequences of control pulses and drift processes implementing these gates are given.
Eduardo Romero-Sánchez
2012-06-01
Full Text Available Introducción. ¿Planifican los tutores la formación de sus residentes? Si es así, ¿cómo lo hacen?, ¿existen diferencias entre lo explicitado en los programas formativos de las distintas especialidades y lo que ocurre realmente en la práctica diaria?, ¿están formados los tutores para planificar su docencia desde el punto de vista pedagógico? Sujetos y métodos. Para dar respuesta a estos interrogantes se ha llevado a cabo un estudio exploratorio de corte descriptivo. En él se ha diseñado, validado y presentado un cuestionario que recoge la opinión contrastada tanto de tutores como de sus respectivos residentes. La población la componen el total de los médicos residentes R1 (promoción 2006-2010; n = 57 y R3 (promoción 2004-2007; n = 58 de Medicina Familiar y Comunitaria de la Región de Murcia, y el total de la población de sus respectivos tutores: tutores de R1 (n = 57 y tutores de R3 (n = 58. Han participado 26 centros de salud que gestionan las tres unidades docentes de la región. Los datos se han analizado mediante el programa SPSS v. 14.0. Resultados y conclusiones. Aunque en la actividad docente de los tutores está muy presente la espontaneidad y la improvisación, existen importantes elementos de programación que hay que saber extraer e identificar porque son propios de un contexto práctico de formación. Se reconoce una mayor satisfacción de los implicados cuando el proceso formativo está más planificado.Introduction. Do tutors plan the formation of their residents?; and if so, how do they do it?, are there any differences between the content of the training programs of the different specialties and what actually happens in daily practice?, are they trained to plain their teaching from a pedagogical point of view? Subjects and methods. To answer these questions we have developed an exploratory study-descriptive. It has been designed, validated and passed a questionnaire that reflects the views contrasted of tutors
NONE
2004-03-01
The departmental plans of domestic wastes management are official documents which manage the actions needed to realize the legislative and regulation objectives concerning the domestic wastes and related wastes. A first evaluation has been realized in 1997 for 47 edited plans. In the context of the new wastes policy a new evaluation has been realized by the ADEME in 2002 for 98 plans. It provides the methodology of the study, the analysis of the plans, the sites and management of wastes, economic data, the equipment and investments. (A.L.B.)
戚钧科
2014-01-01
The peace culture in Hunan can be a new carrier and supporter for both sides between Taiwan straits and mainland to promote exchanges and a deeper communication .Under this situation ,both sides can concentrate on the connotation and value of the peace culture in Hunan by developing tourism and planning themes and routes .Based on strengthening the construction of cultural industry ,peace culture can be positively involved in trades , the pilot policies ,political dialogues to offer platforms and opportunities . It may play an important role in the process of cooperation between Hunan and Taiwan , even in the process of national unity .%湖南和平文化可以作为两岸湘台促进往来、加深沟通的新载体和新渠道。在两岸和平发展的大背景下，双方可以从旅游这一简单易行的形式开始，通过主题定位和线路规划，集中展现湖南和平文化资源的内涵和价值；在加强文化产业建设的基础上，围绕经贸往来、政策试点试验、政治对话打造平台、拓展空间，和平文化有可能在湘台合作及国家统一大业进程中发挥积极作用。
Dimensional Reduction for Conformal Blocks
Hogervorst, Matthijs
2016-01-01
We consider the dimensional reduction of a CFT, breaking multiplets of the d-dimensional conformal group SO(d+1,1) up into multiplets of SO(d,1). This leads to an expansion of d-dimensional conformal blocks in terms of blocks in d-1 dimensions. In particular, we obtain a formula for 3d conformal blocks as an infinite sum over 2F1 hypergeometric functions with closed-form coefficients.
Nigro, Alessandro, E-mail: Alessandro.Nigro@mi.infn.it [Dipartimento di Fisica and INFN – Sezione di Milano, Università degli Studi di Milano I, Via Celoria 16, I-20133 Milano (Italy)
2013-06-21
We introduce a free field realization of the central extension of the Lie algebra D{sub q} of difference operators on the circle in terms of the fermionic η–ξ system. This realization admits a nontrivial Jordan block structure. We also review the free field realization of W{sub 1+∞} algebra, and point out some relations between its generators of weight zero and the local integrals of motion of Bazhanov, Lukyanov and Zamolodchikov. Finally we compute the finitized characters, and the continuum characters of the Local Integrals of Motion, and find out and interesting analogy with the generating functions for the counting of branched covers of elliptic curves.
Reliability computation from reliability block diagrams
Chelson, P. O.; Eckstein, E. Y.
1975-01-01
Computer program computes system reliability for very general class of reliability block diagrams. Four factors are considered in calculating probability of system success: active block redundancy, standby block redundancy, partial redundancy, and presence of equivalent blocks in the diagram.
Lorenzo Milazzo
1997-05-01
Full Text Available An ASQS(v is a particular Steiner system featuring a set of v vertices and two separate families of blocks, B and G, whose elements have a respective cardinality of 4 and 6. It has the property that any three vertices of X belong either to a B-block or to a G-block. The parameter cb is the number of common blocks in two separate ASQSs, both defined on the same set of vertices X . In this paper it is shown that cb ≤ 29 for any pair of ASQSs(12.
Technology Used for Realization of the Reform in Informal Areas.
Qirko, K.
2008-12-01
ORGANIZATION OF STRUCTURE AND ADMINISTRATION OF ALUIZNI Law no. 9482, date 03.03.2006 " On legalization, urban planning and integration of unauthorized buildings", entered into force on May 15, 2006. The Council of Ministers, with its decision no.289, date 17.05.2006, established the Agency for the Legalization, Urbanization, and Integration of the Informal Zones/Buildings (ALUIZNI), with its twelve local bodies. ALUIZNI began its activity in reliance to Law no. 9482, date 03.03.2006 " On legalization, urban planning and integration of unauthorized buildings", in July 2006. The administration of this agency was completed during this period and it is composed of; General Directory and twelve regional directories. As of today, this institution has 300 employees. The administrative structure of ALUIZNI is organized to achieve the objectives of the reform and to solve the problems arising during its completion. The following sectors have been established to achieve the objectives: Sector of compensation of owners; sector of cartography, sector of geographic system data elaboration (GIS) and Information Technology; sector of urban planning; sector of registration of legalized properties and Human resource sector. Following this vision, digital air photography of the Republic of Albania is in process of realization, from which we will receive, for the first time, orthophoto and digital map, unique for the entire territory of our country. This cartographic product, will serve to all government institutions and private ones. All other systems, such as; system of territory management; system of property registration ; system of population registration; system of addresses; urban planning studies and systems; definition of boundaries of administrative and touristic zones will be established based on this cartographic system. The cartographic product will be of parameters mentioned below, divided in lots:(2.3 MEuro) 1.Lot I: It includes the urban zone, 1200 km2. It will have
Eikonalization of Conformal Blocks
Fitzpatrick, A Liam; Walters, Matthew T; Wang, Junpu
2015-01-01
Classical field configurations such as the Coulomb potential and Schwarzschild solution are built from the $t$-channel exchange of many light degrees of freedom. We study the CFT analog of this phenomenon, which we term the `eikonalization' of conformal blocks. We show that when an operator $T$ appears in the OPE $\\mathcal{O}(x) \\mathcal{O}(0)$, then the large spin $\\ell$ Fock space states $[TT \\cdots T]_{\\ell}$ also appear in this OPE with a computable coefficient. The sum over the exchange of these Fock space states in an $\\langle \\mathcal{O} \\mathcal{O} \\mathcal{O} \\mathcal{O} \\rangle$ correlator build the classical `$T$ field' in the dual AdS description. In some limits the sum of all Fock space exchanges can be represented as the exponential of a single $T$ exchange in the 4-pt correlator of $\\mathcal{O}$. Our results should be useful for systematizing $1/\\ell$ perturbation theory in general CFTs and simplifying the computation of large spin OPE coefficients. As examples we obtain the leading $\\log \\ell$...
ModelSim/Simulink Cosimulation and FPGA Realization of a Multiaxis Motion Controller
Ying-Shieh Kung
2015-01-01
Full Text Available This paper is to implement a multiaxis servo controller and a motion trajectory planning within one chip. At first, SoPC (system on a programmable chip technology which is composed of an Altera FPGA (field programmable gate arrays chip and an embedded soft-core Nios II processor is taken as the development of a multiaxis motion control IC. The multiaxis motion control IC has two modules. The first module is Nios II processor which realizes the motion trajectory planning by software. It includes the step, circular, window, star, and helical motion trajectory. The second module presents a function of the multiaxis position/speed/current controller IP (intellectual property by hardware. And VHDL (VHSIC Hardware Description Language is applied to describe the multiaxis servo controller behavior. Before the FPGA realization, a cosimulation work by ModelSim/Simulink is applied to test the VHDL code. Then, this IP combined by Nios II processor will be downloaded to FPGA. Therefore, a fully digital multiaxis motion controller can be realized by a single FPGA chip. Finally, to verify the effectiveness and correctness of the proposed multiaxis motion control IP, a three-axis motion platform (XYZ table is constructed and some experimental results are presented.
Adductor Canal Block versus Femoral Nerve Block and Quadriceps Strength
Jæger, Pia Therese; Nielsen, Zbigniew Jerzy Koscielniak; Henningsen, Lene Marianne;
2013-01-01
: The authors hypothesized that the adductor canal block (ACB), a predominant sensory blockade, reduces quadriceps strength compared with placebo (primary endpoint, area under the curve, 0.5-6 h), but less than the femoral nerve block (FNB; secondary endpoint). Other secondary endpoints were...
殷炜达; 李璇
2015-01-01
According to the internationally recognized principle of authenticity in the renovation of ancient buildings, it has become a globally accepted ideal that the timber materials used in the maintenance of ancient wooden constructions should be of the same species and quality as the original ones and be processed in the same method. This paper discusses the special nature of the maintenance material used in the ancient wooden buildings of the world heritage, then explores the functions of the urban forest which has been developing rapidly in China in recent years, and puts forward the following proposals: we should get knowledge of the material requirements of ancient wooden buildings after surveying them, then make urban forest play a new function of nurturing the special maintenance material for ancient wooden buildings by adjusting the urban green space planning, and finally achieve sustainable preservation and inheritance of the important cultural heritage of our country in the long-term strategically.%在古建筑修缮中依据国际公认的真实性原则,确保古木建筑文物维修用材做到与建造时使用的木材具备"相同树种、相同品质、相同工艺"的做法,愈来愈成为国际上公认的一个理想目标. 在论述了世界文化遗产古木建筑维修用材特殊性的基础上,对近年来我国快速发展的城市森林的功能进行了发掘,提出了通过调查古木建筑物,获取古木建筑物所使用的材种规格要求,再通过调整完善城市绿地规划,赋予城市森林一种培育特殊古木建筑维修用材的新功能,从长远的、战略的角度可望实现我国重要文化遗产的可持续保存与传承.
Linda Jensen
2007-01-01
@@ Jensen's "Lesson Planning"article serves aS a guide fOr novice teachers who need to create formalized lesson plans.The article covers why,when,and how teachers plan lessons,as well aS basic lesson plan principles and a lesson plan template.
Axel, Erik
they have to decide who among us does what with what to achieve this. It will be argued that this process contains moral and political aspects, as well as aspects of privilege, and that these aspects as well as the organising of planning takes shape from concrete conditions. It will be argued that even...... into any conceivable detail of the house to be built, still, unanticipated conditions appear during the whole process which must be taken into account. The planning is therefore not a realization of an idea, but a political development in the material and practical existence of the house.......It is common to associate situated activity with concrete, craftlike or manual activity here and now and to reserve theoretical and abstract thinking for activities like theoretical experimentation and systematic planning. Much work has gone into demonstrating that these activities are concrete...
Exponential GARCH Modeling with Realized Measures of Volatility
Hansen, Peter Reinhard; Huang, Zhuo
returns and volatility. We apply the model to DJIA stocks and an exchange traded fund that tracks the S&P 500 index and find that specifications with multiple realized measures dominate those that rely on a single realized measure. The empirical analysis suggests some convenient simplifications...
Aspect-Oriented Change Realizations and Their Interaction
Vranić, Valentino; Menkyna, Radoslav; Bebjak, Michal
2009-01-01
With aspect-oriented programming, changes can be treated explicitly and directly at the programming language level. An approach to aspect-oriented change realization based on a two-level change type model is presented in this paper. In this approach, aspect-oriented change realizations are mainly...
Aspect-Oriented Change Realizations and Their Interaction
Vranić, Valentino; Menkyna, Radoslav; Bebjak, Michal
2009-01-01
With aspect-oriented programming, changes can be treated explicitly and directly at the programming language level. An approach to aspect-oriented change realization based on a two-level change type model is presented in this paper. In this approach, aspect-oriented change realizations are mainly...
Locally operating realizations of nonconnected transformation Lie groups
García-Prada, Oscar; del Olmo, Mariano A.; Santander, Mariano
1988-05-01
A systematic study of locally operating multiplier realizations of nonconnected Lie groups of transformations is presented that generalizes previous results on connected groups. The semilinear locally operating multiplier realizations of a nonconnected group G are those obtained through an induction process from the finite-dimensional semilinear representations of a given subgroup of a representation group Ḡ for G.
Constrained Superfields and Standard Realization of Nonlinear Supersymmetry
Luo, Hui; Zheng, Sibo
2009-01-01
A constrained superfield formalism has been proposed recently to analyze the low energy physics related to Goldstinos. We prove that this formalism can be reformulated in the language of standard realization of nonlinear supersymmetry. New relations have been uncovered in the standard realization of nonlinear supersymmetry.
A Generic Solution to Realize Public Verifiability of Signcryption
LEI Feiyu; CHEN Wen; CHEN Kefei
2006-01-01
Signcryption has been a rapidly emerging efficient approach to achieve authenticity and confidentiality within a logic single step. However, it is still a difficult problem to realize public verifiability of signcryption in an efficient and secure way. Here, we present a generic solution to realize public verifiability based on quadratic residue.
Hermitian realizations of κ-Minkowski space-time
Kovačević, Domagoj; Meljanac, Stjepan; Samsarov, Andjelo; Škoda, Zoran
2015-01-01
General realizations, star products and plane waves for κ-Minkowski space-time are considered. Systematic construction of general Hermitian realization is presented, with special emphasis on noncommutative plane waves and Hermitian star product. Few examples are elaborated and possible physical applications are mentioned.
Supernatural Horror in English Literature and Means of it Realization
Ella V. Nesterik
2014-11-01
Full Text Available This article deals with linguistic means realizing supernatural horror in the language of fiction. The research is based on the hypothesis that the category of supernatural/irreal horrible being a part of literary space is realized by means of this global textual category.
Supernatural Horror in English Literature and Means of it Realization
Ella V. Nesterik; Maiya A. Kazbekova
2014-01-01
This article deals with linguistic means realizing supernatural horror in the language of fiction. The research is based on the hypothesis that the category of supernatural/irreal horrible being a part of literary space is realized by means of this global textual category.
Moret, Nicola; Tonello, Andrea M.
2010-12-01
We address the efficient realization of a filtered multitone (FMT) modulation system and its orthogonal design. FMT modulation can be viewed as a Discrete Fourier Transform (DFT) modulated filter bank (FB). It generalizes the popular orthogonal frequency division multiplexing (OFDM) scheme by deploying frequency confined subchannel pulses. We compare three realizations that have been described by Cvetković and Vetterli (1998), and Weiss and Stewart (2000), and Tonello (2006). A detailed derivation of them is performed in the time-domain via the exploitation of different FB polyphase decompositions. We then consider the design of an orthogonal FMT system and we exploit the third realization which allows simplifying the orthogonal FB design and obtaining a block diagonal system matrix with independent subblocks. A numerical method is then presented to obtain an orthogonal FB with well frequency confined subchannel pulses for arbitrarily large number of subchannels. Several examples of pulses with minimal length are reported and their performance is evaluated in typical multipath fading channels. Finally, we compare the orthogonal FMT system with a cyclically prefixed OFDM system in the IEEE 802.11 wireless LAN channel. In this scenario, FMT with minimal length pulses and single tap subchannel equalization outperforms the OFDM system in achievable rate.
Andrea M. Tonello
2010-01-01
Full Text Available We address the efficient realization of a filtered multitone (FMT modulation system and its orthogonal design. FMT modulation can be viewed as a Discrete Fourier Transform (DFT modulated filter bank (FB. It generalizes the popular orthogonal frequency division multiplexing (OFDM scheme by deploying frequency confined subchannel pulses. We compare three realizations that have been described by Cvetković and Vetterli (1998, and Weiss and Stewart (2000, and Tonello (2006. A detailed derivation of them is performed in the time-domain via the exploitation of different FB polyphase decompositions. We then consider the design of an orthogonal FMT system and we exploit the third realization which allows simplifying the orthogonal FB design and obtaining a block diagonal system matrix with independent subblocks. A numerical method is then presented to obtain an orthogonal FB with well frequency confined subchannel pulses for arbitrarily large number of subchannels. Several examples of pulses with minimal length are reported and their performance is evaluated in typical multipath fading channels. Finally, we compare the orthogonal FMT system with a cyclically prefixed OFDM system in the IEEE 802.11 wireless LAN channel. In this scenario, FMT with minimal length pulses and single tap subchannel equalization outperforms the OFDM system in achievable rate.
Moret Nicola
2010-01-01
Full Text Available Abstract We address the efficient realization of a filtered multitone (FMT modulation system and its orthogonal design. FMT modulation can be viewed as a Discrete Fourier Transform (DFT modulated filter bank (FB. It generalizes the popular orthogonal frequency division multiplexing (OFDM scheme by deploying frequency confined subchannel pulses. We compare three realizations that have been described by Cvetković and Vetterli (1998, and Weiss and Stewart (2000, and Tonello (2006. A detailed derivation of them is performed in the time-domain via the exploitation of different FB polyphase decompositions. We then consider the design of an orthogonal FMT system and we exploit the third realization which allows simplifying the orthogonal FB design and obtaining a block diagonal system matrix with independent subblocks. A numerical method is then presented to obtain an orthogonal FB with well frequency confined subchannel pulses for arbitrarily large number of subchannels. Several examples of pulses with minimal length are reported and their performance is evaluated in typical multipath fading channels. Finally, we compare the orthogonal FMT system with a cyclically prefixed OFDM system in the IEEE 802.11 wireless LAN channel. In this scenario, FMT with minimal length pulses and single tap subchannel equalization outperforms the OFDM system in achievable rate.
Geography:The TIGER Line Files are feature classes and related database files (.) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by non visible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up t
Block storage subsystem performance analysis
CERN. Geneva
2016-01-01
You feel that your service is slow because of the storage subsystem? But there are too many abstraction layers between your software and the raw block device for you to debug all this pile... Let's dive on the platters and check out how the block storage sees your I/Os! We can even figure out what those patterns are meaning.
The Effectiveness of Block Scheduling.
Creamean, Sharon Lightle; Horvath, Robert Jeffery
This report describes a program for the exploration of block scheduling. The targeted population consists of high school students in a growing, middle-class community, located in a suburban setting of a large mid-western city. The historical background of block scheduling is documented through data gathered using attendance reports, student…
1977-01-01
The photo shows a four-block collimator installed on a control table for positioning the alignment reference marks. Designed for use with the secondary beams, the collimators operated in vacuum conditions. The blocks were made of steel and had a standard length of 1 m. The maximum aperture had a square coss-section of 144 cm2. (See Annual Report 1976.)
Block Transfer Agreement Evaluation Project
Bastedo, Helena
2010-01-01
The objective of this project is to evaluate for the British Columbia Council on Admissions and Transfer (BCCAT) the effectiveness of block transfer agreements (BTAs) in the BC Transfer System and recommend steps to be taken to improve their effectiveness. Findings of this study revealed that institutions want to expand block credit transfer;…
OPAL Various Lead Glass Blocks
These lead glass blocks were part of a CERN detector called OPAL (one of the four experiments at the LEP particle detector). OPAL uses some 12 000 blocks of glass like this to measure particle energies in the electromagnetic calorimeter. This detector measured the energy deposited when electrons and photons were slowed down and stopped.
The wild tapered block bootstrap
Hounyo, Ulrich
In this paper, a new resampling procedure, called the wild tapered block bootstrap, is introduced as a means of calculating standard errors of estimators and constructing confidence regions for parameters based on dependent heterogeneous data. The method consists in tapering each overlapping block...
Language Planning: Corpus Planning.
Baldauf, Richard B., Jr.
1989-01-01
Focuses on the historical and sociolinguistic studies that illuminate corpus planning processes. These processes are broken down and discussed under two categories: those related to the establishment of norms, referred to as codification, and those related to the extension of the linguistic functions of language, referred to as elaboration. (60…
Combinatorial realizations of crystals via torus actions on quiver varieties
Sam, Steven V
2012-01-01
Consider Kashiwara's crystal associated to a highest weight representation of a symmetric Kac--Moody algebra. There is a geometric realization of this object using Nakajima's quiver varieties. In many particular cases it can also be realized by elementary combinatorial methods. Here we propose a framework for extracting combinatorial realizations from the geometric picture: we construct certain torus actions on the quiver varieties and use Morse theory to index the irreducible components by connected components of the subvariety of torus fixed points. We then discuss the case of affine sl(n). There the fixed point components are just points, and are naturally indexed by multi-partitions. There is some choice in our construction, leading to a family of combinatorial realizations for each highest weight crystal. In the case of the crystal of the fundamental representation we recover a family of realizations which was recently constructed by Fayers. This gives a more conceptual proof of Fayers' result as well as...
Radix-3 Algorithm for Realization of Discrete Fourier Transform
M.Narayan Murty
2016-07-01
Full Text Available In this paper, a new radix-3 algorithm for realization of discrete Fourier transform (DFT of length N = 3m (m = 1, 2, 3,... is presented. The DFT of length N can be realized from three DFT sequences, each of length N/3. If the input signal has length N, direct calculation of DFT requires O (N 2 complex multiplications (4N 2 real multiplications and some additions. This radix-3 algorithm reduces the number of multiplications required for realizing DFT. For example, the number of complex multiplications required for realizing 9-point DFT using the proposed radix-3 algorithm is 60. Thus, saving in time can be achieved in the realization of proposed algorithm.
Regulating output of a fuel supply channel of blocks 500 MW
Smetana, A.Z.; Feofilov, G.P.; Nemerskiy, B.V.; Rayevskiy, S.A.
1980-01-01
The operating optimal regime of a channel of fuel supply is guaranteed with maximum fuel load. In this case it is necessary to stabilize the load of fuel supply and to prevent evacuation of any of the bend sections in order to exclude damages to the feeders because of dynamic impacts of the loaded fuel. Currently control of the output of the feeders is done by an operator. Tests of the Troitskiy GRES indicated the average load of the channel of fuel supply 75% and difficulties in the work of the operator. Consequently, the Ural All-Union Heat-Engineering Institute developed the SAU. A flow sheet is presented for the system of regulation with continuous change in output of the feeders. For the loading device of blocks 500 MW equipped with feeders with 4-velocity electric motors, a logical automatic control has been developed which realizes optimal algorithm of operation on whose basis a graph has been developed for transitions of the automatic control. A plan is presented for stabilizing the productivity of fuel supply realizing this algorithm of control. On the whole, the system of automatic stabilization implements an integrated law of regulation of output, makes it possible to prevent complete emptying of the bins by simultaneous regulation of the load of the conveyer at the assigned level. It makes it possible to reduce the specific fuel consumption unit of electric energy increase reliability and quality of operation of the unit, free the personnel from the need of tracing the level of fuel in the bins and improve the conditions of its operation.
Domotics Project Housing Block.
Morón, Carlos; Payán, Alejandro; García, Alfonso; Bosquet, Francisco
2016-05-23
This document develops the study of an implementation project of a home automation system in a housing placed in the town of Galapagar, Madrid. This house, which is going to be occupied by a four-member family, consists of 67 constructed square meters distributed in lounge, kitchen, three bedrooms, bath, bathroom and terrace, this being a common arrangement in Spain. Thus, this study will allow extracting conclusions about the adequacy of the home automation in a wide percentage of housing in Spain. In this document, three house automation proposals are developed based on the requirements of the client and the different home automation levels that the Spanish House and Building Automation Association has established, besides two parallel proposals relating to the safety and the technical alarms. The mentioned proposed systems are described by means of product datasheets and descriptions, distribution plans, measurements, budgets and flow charts that describe the functioning of the system in every case. An evaluation of each system is included, based on other studies conclusions on this matter, where expected energy savings from each design, depending on the current cost of lighting, water and gas, as well as the expected economic amortization period is evaluated.
Domotics Project Housing Block
Carlos Morón
2016-05-01
Full Text Available This document develops the study of an implementation project of a home automation system in a housing placed in the town of Galapagar, Madrid. This house, which is going to be occupied by a four-member family, consists of 67 constructed square meters distributed in lounge, kitchen, three bedrooms, bath, bathroom and terrace, this being a common arrangement in Spain. Thus, this study will allow extracting conclusions about the adequacy of the home automation in a wide percentage of housing in Spain. In this document, three house automation proposals are developed based on the requirements of the client and the different home automation levels that the Spanish House and Building Automation Association has established, besides two parallel proposals relating to the safety and the technical alarms. The mentioned proposed systems are described by means of product datasheets and descriptions, distribution plans, measurements, budgets and flow charts that describe the functioning of the system in every case. An evaluation of each system is included, based on other studies conclusions on this matter, where expected energy savings from each design, depending on the current cost of lighting, water and gas, as well as the expected economic amortization period is evaluated.
Outer Continental Shelf Lease Blocks - Gulf of Mexico Region NAD27
Bureau of Ocean Energy Management, Department of the Interior — This data set contains OCS block outlines (clipped) to the GOM Planning Area Boundary in ArcGIS shape file format for the BOEM Gulf of Mexico Region. OCS blocks are...
Data Policy Construction Set - Building Blocks from Childhood Constructions
Fleischer, Dirk; Paul-Stueve, Thilo; Jobmann, Alexandra; Farrenkopf, Stefan
2016-04-01
A complete construction set of building blocks usually comes with instructions and these instruction include building stages. The products of these building stages usually build from very general parts become highly specialized building parts for very unique features of the whole construction model. This sounds very much like the construction or organization of an interdisciplinary research project, institution or association, doesn't it! The creation process of an overarching data policy for a project group or institution is exactly the combination of individual interests with the common goal of a collaborative data policy and can be compared with the building stages of a construction set of building blocks and the building instructions. Keeping this in mind we created the data policy construction set of textual building blocks. This construction set is subdivided into several building stages or parts each containing multiple building blocks as text blocks. By combining building blocks of all subdivisions it is supposed to create a cascading data policy document. Cascading from the top level as a construction set provider for all further down existing levels such as project, themes, work packages or Universities, faculties, institutes down to the working level of working groups. The working groups are picking from the remaining building blocks in the provided construction set the suitable blocks for its working procedures to create a very specific policy from the available construction set provided by the top level community. Nevertheless, if a working group realized that there are missing building blocks or worse that there are missing building parts, then they have the chance to add the missing pieces to the construction set of direct an future use. This cascading approach enables project or institution wide application of the encoded rules from the textual level on access to data storage infrastructure. This structured approach is flexible enough to allow for
Qualifying for Career Planning
Aleksandra Kovač
1996-12-01
Full Text Available The need for education in various spheres of life, which allows a person to fully develop his/her personality, is more and more presen t also in our society. The discussed educational programme Discovering Vocational Goals and Forming Strategies· to Realize them qualifies people for autonomous career planning by offer ing them one of the possible ways of making decisions in relation to profession and job. In the course of the realization of the programme the participants are given the chance to think about the kind of work that would suit their interests, capabilities and individual characteristics as weel as the needs in certain environments (possible employers. They are encouraged to make an actual plan, stating how and when the desired objective will be reached. In 1995 the pro gramme was being carried out within nine semi nars organized at the Employment Offices in Maribor and Ptuj. During that time the pro gramme has also been evaluated by Doba - Education Office, which was funded by the Ministry of Work, Family and Social Matters. The paper includes the content of the programme as well as the assessments of the research project. The presented data show that the participants learned the method of career planning and acquired greater self-confidence and motivation to solve their job problem actively.
Octonionic Realizations of 1-dimensional Extended Supersymmetries. A Classification
Carrion, H L; Toppan, F
2003-01-01
The classification of the octonionic realizations of the one-dimensional extended supersymmetries is here furnished. These are non-associative realizations which, albeit inequivalent, are put in correspondence with a subclass of the already classified associative representations for 1D extended supersymmetries. Examples of dynamical systems invariant under octonionic realizations of the extended supersymmetries are given. We cite among the others the octonionic spinning particles, the N=8 KdV, etc. Possible applications to supersymmetric systems arising from dimensional reduction of the octonionic superstring and M-theory are mentioned.
Octonionic realizations of 1-dimensional extended supersymmetries. A classification
Carrion, H.L.; Rojas, M.; Toppan, F. [Centro Brasileiro de Pesquisas Fisicas (CBPF), Rio de Janeiro, RJ (Brazil). Coordenacao de Teoria de Campos e Particulas]. E-mail: hleny@cbpf.br; mrojas@cbpf.br; toppan@cbpf.br
2002-12-01
The classification of the octonionic realizations of the one-dimensional extended supersymmetries is here furnished. These are non-associative realizations which, albeit inequivalent, are put in correspondence with a subclass of the already classified associative representations for 1D extended supersymmetries. Examples of dynamical systems invariant under octonionic realizations of the extended supersymmetries are given. We cite among the others the octonionic spinning particles, the N = 8 KdV, etc. Possible applications to supersymmetric systems arising from dimensional reduction of the octonionic superstring and M-theory are mentioned. (author)
Fermionic coset realization of primaries in critical statistical models
Cabra, D C; Rothe, K D
1995-01-01
We obtain a fermionic coset realization of the primaries of minimal unitary models and show how their four-point functions may be calculated by the use of a reduction formula. We illustrate the construction for the Ising model, where we obtain an explicit realization of the energy operator, Onsager fermions, as well as of the order and disorder operators realizing the dual algebra, in terms of constrained Dirac fermions. The four-point correlators of these operators are shown to agree with those obtained by other methods.
Forecasting stock market volatility: Do realized skewness and kurtosis help?
Mei, Dexiang; Liu, Jing; Ma, Feng; Chen, Wang
2017-09-01
In this study, we investigate the predictability of the realized skewness (RSK) and realized kurtosis (RKU) to stock market volatility, that has not been addressed in the existing studies. Out-of-sample results show that RSK, which can significantly improve forecast accuracy in mid- and long-term, is more powerful than RKU in forecasting volatility. Whereas these variables are useless in short-term forecasting. Furthermore, we employ the realized kernel (RK) for the robustness analysis and the conclusions are consistent with the RV measures. Our results are of great importance for portfolio allocation and financial risk management.
Conformal Nets II: Conformal Blocks
Bartels, Arthur; Douglas, Christopher L.; Henriques, André
2017-03-01
Conformal nets provide a mathematical formalism for conformal field theory. Associated to a conformal net with finite index, we give a construction of the `bundle of conformal blocks', a representation of the mapping class groupoid of closed topological surfaces into the category of finite-dimensional projective Hilbert spaces. We also construct infinite-dimensional spaces of conformal blocks for topological surfaces with smooth boundary. We prove that the conformal blocks satisfy a factorization formula for gluing surfaces along circles, and an analogous formula for gluing surfaces along intervals. We use this interval factorization property to give a new proof of the modularity of the category of representations of a conformal net.
Conformal Nets II: Conformal Blocks
Bartels, Arthur; Douglas, Christopher L.; Henriques, André
2017-08-01
Conformal nets provide a mathematical formalism for conformal field theory. Associated to a conformal net with finite index, we give a construction of the `bundle of conformal blocks', a representation of the mapping class groupoid of closed topological surfaces into the category of finite-dimensional projective Hilbert spaces. We also construct infinite-dimensional spaces of conformal blocks for topological surfaces with smooth boundary. We prove that the conformal blocks satisfy a factorization formula for gluing surfaces along circles, and an analogous formula for gluing surfaces along intervals. We use this interval factorization property to give a new proof of the modularity of the category of representations of a conformal net.
Realization technology of attribute block definition in SolidEdge%SolidEdge中属性块定义技术
赵长宽; 姬彦巧
2006-01-01
在分析了AutoCAD的块和属性块定义技术的基础上,研究如何在SolidEdge中实现类似技术的方法.提出在SolidEdge中以组对象为基础构建块,以其属性集实现块属性的存储,并应用UML描述了主要问题的算法过程.基于COM技术实现了创建块、插入块、块分解、块信息处理的方法,以构建的一个标准图纸自动生成系统为例,说明块技术应用情况.
3D Identification and Stability Analysis of Key Surface Blocks of Rock Slope
李明超; 周四宝; 王刚
2016-01-01
Complicated geological structures make it difficult to analyze the stability of rock slopes, such as faults, weak intercalated layers or joint fissures. Based on 3D geological modeling and surface block identifying methods, an integrated methodology framework was proposed and realized to analyze the stability of surface blocks in rock slopes. The surface blocks cut by geological structures, fissures or free faces could be identified subjected to the four principles of closure, completeness, uniqueness and validity. The factor of safety(FOS)of single key block was calculated by the limit equilibrium method. If there were two or more connected blocks, they were defined as a block-group. The FOS of a block-group was computed by the Sarma method. The proposed approach was applied to an actual rock slope of a hydropower project, and some possible instable blocks were demonstrated and analyzed visually. The obtained results on the key blocks or block-groups provide essential information for determining po-tential instable region of rock slopes and designing effective support scheme in advance.
Bootstrapping pre-averaged realized volatility under market microstructure noise
Hounyo, Ulrich; Goncalves, Sílvia; Meddahi, Nour
-averaged returns implies that these are kn-dependent with kn growing slowly with the sample size n. This motivates the application of a blockwise bootstrap method. We show that the "blocks of blocks" bootstrap method suggested by Politis and Romano (1992) (and further studied by Bühlmann and Künsch (1995...
Testing .NET application blocks version 1.0
Microsoft. Redmond
2005-01-01
Complex software environments require more in-depth testing. This book delivers the detailed guidance you need to plan and execute testing for the solutions you develop with Microsoft PATTERNS & PRACTICES application blocks. Whether you're customizing the application blocks or integrating them into existing applications, you'll understand the key considerations for verifying that your code meets its requirements for performance, availability, scalability, compatibility, globalization, and security features. You'll find code examples, sample test cases, and checklists that demonstrate how to p
Risum, Niels; Strauss, David; Sogaard, Peter
2013-01-01
The relationship between myocardial electrical activation by electrocardiogram (ECG) and mechanical contraction by echocardiography in left bundle-branch block (LBBB) has never been clearly demonstrated. New strict criteria for LBBB based on a fundamental understanding of physiology have recently...
Hawaii Census 2000 Block Groups
U.S. Environmental Protection Agency — This data layer represents Census 2000 demographic data derived from the PL94-171 redistricting files and SF3. Census geographic entities include blocks, blockgroups...
Risum, Niels; Strauss, David; Sogaard, Peter;
2013-01-01
The relationship between myocardial electrical activation by electrocardiogram (ECG) and mechanical contraction by echocardiography in left bundle-branch block (LBBB) has never been clearly demonstrated. New strict criteria for LBBB based on a fundamental understanding of physiology have recently...
Recursion Relations for Conformal Blocks
Penedones, João; Yamazaki, Masahito
2016-09-12
In the context of conformal field theories in general space-time dimension, we find all the possible singularities of the conformal blocks as functions of the scaling dimension $\\Delta$ of the exchanged operator. In particular, we argue, using representation theory of parabolic Verma modules, that in odd spacetime dimension the singularities are only simple poles. We discuss how to use this information to write recursion relations that determine the conformal blocks. We first recover the recursion relation introduced in 1307.6856 for conformal blocks of external scalar operators. We then generalize this recursion relation for the conformal blocks associated to the four point function of three scalar and one vector operator. Finally we specialize to the case in which the vector operator is a conserved current.
Bureau of Ocean Energy Management, Department of the Interior — This data set contains OCS block outlines and delineated polygons in ESRI ArcGIS shape file format for the BOEM Gulf of Mexico Region that contain sediment resources...
Realizability algebras: a program to well order R
Krivine, Jean-Louis
2010-01-01
We give a method to transform into programs, classical proofs using a well ordering of the reals. The technology uses a generalization of Cohen's forcing and the theory of classical realizability introduced by the author.
Fermionic coset realization of the critical Ising model
Cabra, D C; Rothe, K D
1995-01-01
We obtain an explicit realization of all the primary fields of the Ising model in terms of a conformal field theory of constrained fermions. The four-point correlators of the energy, order and disorder operators are explicitly calculated.
Realizing the Value of a National Asset: Scientific Data
Wilson, Anne; Downs, Robert R.; Lenhardt, W. Christopher; Meyer, Carol; Michener, William; Ramapriyan, Hampapuram; Robinson, Erin
2014-12-01
"We have a shared responsibility to create and implement strategies to realize the full potential of digital information for present and future generations," according to the Electronic Geophysical Year (eGY) Declaration [CoBabe-Ammann et al., 2007
How to make development plans suitable for volatile contexts.
Rauws, W.S.; Cook, M.; van Dijk, T.
2014-01-01
Development plans are central tools in spatial planning practice. They create a vision of how places should develop and prescribe how desired patterns of development will be realized. However, development plans are increasingly regarded as inflexible and even rigid when confronted by changes in
Multi-block and path modelling procedures
Høskuldsson, Agnar
2008-01-01
The author has developed a unified theory of path and multi-block modelling of data. The data blocks are arranged in a directional path. Each data block can lead to one or more data blocks. It is assumed that there is given a collection of input data blocks. Each of them is supposed to describe one...
A Novel Tetrathiafulvalene Building Block
Jeppesen, Jan Oskar; Takimiya, Kazuo; Thorup, Niels
1999-01-01
Efficient synthesis of a novel tetrathiafulvalene building block. 2,3-bis(2-cyanoethylthio)-6,7-bis(thiocyanato-methyl)tetrathiafulv alene (7) useful for stepwise and asymmetrical bis-function-alization is reported.......Efficient synthesis of a novel tetrathiafulvalene building block. 2,3-bis(2-cyanoethylthio)-6,7-bis(thiocyanato-methyl)tetrathiafulv alene (7) useful for stepwise and asymmetrical bis-function-alization is reported....
Realization of New and Enhanced Materials Properties Through Nanostructural Control
2006-05-15
by modifying limits of integration over certain orientational variables [1,64,66]. Typical agreement between theory and experiment is shown below...must be different to realize an entropy enhancement, our preliminary experiments indicate that the difference can be realized in 400 ! , 5 . 3146-C168(75...Lecture: "Rational Desing of Nanostructured Organic Electro-Optic Materials". Conference-January 15-20, 2006--Conference on Photoresponsive Organics and
A Fractal Landscape Realizer for Generating Synthetic Maps
William Hargrove
2002-06-01
Full Text Available A fractal landscape realizer has been developed that generates synthetic landscape maps to user specifications. The alternative landscape realizations are not identical to the actual maps after which they are patterned, but are similar statistically (i.e., the areas and fractal character of each category are replicated. A fractal or self-affine pattern generator is used to provide a spatial probability surface for each category in the synthetic map. The Fractal Realizer arbitrates contentions among categories in a way that makes it possible to preserve the fractal patterns of all the categories in the resulting synthetic landscape. Each synthetic landscape is one equally likely realization from among an infinite ensemble of possible fractal landscape combinations. Synthetic landscapes produced by the Fractal Realizer have been tested using a variant of the Turing Test. More than 100 map experts were presented with a series of 20 selections of paired maps, and asked to distinguish the real map from the synthetic realization. The resulting population of scores was not significantly different from a random binomial, suggesting that the experts were unable to discern the synthetic maps from the actual ones. Statistical landscape indices computed for 25 different synthetic realizations are compared with the values computed for the actual maps. The Fractal Realizer can be used as a stochastic generator of synthetic input maps to a spatially explicit simulation model to test the effects of landscape rearrangement on the uncertainty of model parameter estimates. The sensitivity of stochastic spatial simulations to prescribed input landscapes can be evaluated by supplying them with a series of synthetic maps that obey particular statistical characteristics and by monitoring changes in selected output responses. Statistically similar input landscapes with different spatial arrangements can be generated and supplied to spatial models as a hedge against
PRINCIPLES OF FORMATION AND REALIZATION OF REGIONAL INDUSTRIAL POLICY
R.I. Chenenova
2007-09-01
Full Text Available It is analysed existing norm-legal base of realization of regional industrial policy from a position of conformity of principles of its formation and realization to problems of development of the industry in conditions of an openness to the world market. Opportunities of their evolution in the directions promoting becoming of competitive structure of an industrial complex of region are shown.
Circuit realization of the fractional-order unified chaotic system
Chen Xiang-Rong; Liu Chong-Xin; Wang Fa-Qiang
2008-01-01
This paper studies the chaotic behaviours of the fractional-order unified chaotic system.Based on the approximation method in frequency domain,it proposes an electronic circuit model of tree shape to realize the fractional-order operator.According to the tree shape model,an electronic circuit is designed to realize the 2.7-order unified chaotic system.Numerical simulations and circuit experiments have verified the existence of chaos in the fraction-order unified system.
Realized Bond-Stock Correlation: Macroeconomic Announcement Effects
Christiansen, Charlotte; Ranaldo, Angelo
2005-01-01
We investigate the effects of macroeconomic announcements on the realized correlation between bond and stock returns. Our results deliver insights into the dominating drivers of bond-stock comovements. We find that it is not so much the surprise component of the announcement, but the mere fact that an announcement occurs that influences the realized bond-stock correlation. The impact of macroeconomic announcements varies across the business cycle. Announcement effects are highly dependent on ...
Realized Jump Risk and Equity Return in China
Guojin Chen; Xiaoqun Liu; Peilin Hsieh; Xiangqin Zhao
2014-01-01
We utilize the realized jump components to explore a new jump (including nonsystematic jump and systematic jump) risk factor model. After estimating daily realized jumps from high-frequency transaction data of the Chinese A-share stocks, we calculate monthly jump size, monthly jump standard deviation, and monthly jump arrival rate and then use those monthly jump factors to explain the return of the following month. Our empirical results show that the jump tail risk can explain the equity retu...
[Superior gluteal nerve: a new block on the block?
Sá, Miguel; Graça, Rita; Reis, Hugo; Cardoso, José Miguel; Sampaio, José; Pinheiro, Célia; Machado, Duarte
2017-05-24
The superior gluteal nerve is responsible for innervating the gluteus medius, gluteus minimus and tensor fascia latae muscles, all of which can be injured during surgical procedures. We describe an ultrasound-guided approach to block the superior gluteal nerve which allowed us to provide efficient analgesia and anesthesia for two orthopedic procedures, in a patient who had significant risk factors for neuraxial techniques and deep peripheral nerve blocks. An 84-year-old female whose regular use of clopidogrel contraindicated neuraxial techniques or deep peripheral nerve blocks presented for urgent bipolar hemiarthroplasty in our hospital. Taking into consideration the surgical approach chosen by the orthopedic team, we set to use a combination of general anesthesia and superficial peripheral nerve blocks (femoral, lateral cutaneous of thigh and superior gluteal nerve) for the procedure. A month and a half post-discharge the patient was re-admitted for debriding and correction of suture dehiscence; we performed the same blocks and light sedation. She remained comfortable in both cases, and reported no pain in the post-operative period. Deep understanding of anatomy and innervation empowers anesthesiologists to solve potentially complex cases with safer, albeit creative, approaches. The relevance of this block in this case arises from its innervation of the gluteus medius muscle and posterolateral portion of the hip joint. To the best of our knowledge, this is the first report of an ultrasound-guided superior gluteal nerve block with an analgesic and anesthetic goal, which was successfully achieved. Copyright © 2016 Sociedade Brasileira de Anestesiologia. Publicado por Elsevier Editora Ltda. All rights reserved.
NANOSTRUCTURES OF FUNCTIONAL BLOCK COPOLYMERS
Guojun Liu
2000-01-01
Nanostructure fabrication from block copolymers in my group normally involves polymer design, synthesis, selfassembly, selective domain crosslinking, and sometimes selective domain removal. Preparation of thin films with nanochannels was used to illustrate the strategy we took. In this particular case, a linear triblock copolymer polyisopreneblock-poly(2-cinnamoylethyl methacrylate)-block-poly(t-butyl acrylate), PI-b-PCEMA-b-PtBA, was used. Films, 25 to50μm thick, were prepared from casting on glass slides a toluene solution of PI-b-PCEMA-b-PtBA and PtBA homopolymer,hPtBA, where hPtBA is shorter than the PtBA block. At the hPtBA mass fraction of 20% relative to the triblock or the total PtBA (hPtBA and PtBA block) volume fraction of 0.44, hPtBA and PtBA formed a seemingly continuous phase in the matrix of PCEMA and PI. Such a block segregation pattern was locked in by photocrosslinking the PCEMA domain. Nanochannels were formed by extracting out hPtBA with solvent. Alternatively, larger channels were obtained from extracting out hPtBA and hydrolyzing the t-butyl groups of the PtBA block. Such membranes were not liquid permeable but had gas permeability constants ～6 orders of magnitude higher than that of low-density polyethylene films.
47 CFR 101.1405 - Channeling plan.
2010-10-01
... 47 Telecommunication 5 2010-10-01 2010-10-01 false Channeling plan. 101.1405 Section 101.1405 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE... Channeling plan. Each license shall have one spectrum block of 500 megahertz per geographic area that can...
A SWOT analysis of Planning Support Systems
Vonk, G.; Geertman, S.; Schot, P.P.
2007-01-01
Insight into the strengths, weaknesses, opportunities, and threats (SWOT) of planning support systems (PSS) is fragmented between users and system developers. The lack of combined insights blocks development in the right direction and makes potential users hesitant to apply PSS in planning. This stu
A SWOT analysis of Planning Support Systems
Vonk, G.; Geertman, S.; Schot, P.P.
2007-01-01
Insight into the strengths, weaknesses, opportunities, and threats (SWOT) of planning support systems (PSS) is fragmented between users and system developers. The lack of combined insights blocks development in the right direction and makes potential users hesitant to apply PSS in planning. This
The Path to Finally Realizing the Adaptive Planning Vision of Defense Secretaries Rumsfeld and Gates
2009-04-03
landscape.4 On July 1, 2004, Lieutenant General Ricardo Sanchez relinquished command of Multi-National Force-Iraq (MNF-I) to General George Casey...personal decorations include the Joint Commendation Medal , Navy Commendation Medal (second award), Navy and Marine Corps Achievement Medal (second award
Blocking filters with enhanced throughput for x-ray microcalorimetry
Grove, D. A.; Betcher, J. C.; Lairson, B.; Smith, R.; Ayers, T.
2010-07-01
NASA will fly x-ray microcalorimeters on several mission payloads scheduled within the next 5 years. New and improved blocking filters are urgently needed to realize the full potential and throughput of these missions. High transmission polyimide support mesh is being developed as an alternative to the nickel mesh currently used in blocking filter designs. Polyimide's composition affords high transparency to x-rays, especially above 3 keV. A new filter fabrication technique that simplifies assembly, eliminates adhesives from the filter field, and creates a stronger foil/mesh bond than epoxy, has also been demonstrated. In addition to support mesh, embedded resistive traces are being developed to provide deicing capability to actively restore filter performance in orbit. This report details the progress of this research to date.
Study on Hierarchical Structure of Detailed Control Planning
2010-01-01
Using case studies,this paper analyzes the characteristics of detailed control planning and its hierarchical controls,the form and composition of plan content,and methodological innovations.It then suggests improvements to the planning structure that are oriented at adaptability,fairness,centrality,and scientific principles with regard to the content,methods,and results of the planning.Regarding the hierarchical control system,the paper suggests that the detailed control plan should be composed of "block planning" and "plot planning".It is believed that through a combination of block and plot planning,the problem of joining long-term and short-term planning will be solved and it will be possible to address the need for adjustment and revision of detailed control plan.
Zhaolin Jiang
2014-01-01
Full Text Available We first give the block style spectral decomposition of arbitrary block skew circulant matrix with skew circulant blocks. Secondly, we obtain the singular value of block skew circulant matrix with skew circulant blocks as well. Finally, based on the block style spectral decomposition, we deal with the optimal backward perturbation analysis for the block skew circulant linear system with skew circulant blocks.
[En block hysterectomy. Institutional experience of 6 years].
Bonfante Ramírez, E; Bolaños Ancona, R; Ambas Argüelles, M; Juárez García, L; Castelazo Morales, E
1997-06-01
On block hysterectomy is defined as the removal of the gravid uterus with its gestational content in situ. The described indications for the realization of this procedure are neoplastic process as the most frequent cause; septic process, persistent trophoblastic diseases, and hemorrhage due to anomalous placentation. This is a retrospective, descriptive study of twelve cases of on block hysterectomy collected from January 1989 to December 1994 at Instituto Nacional de Perinatología. An average age of 33.4 years was found. The number of pregnancies for this patients in average was found to be 4.1. The gestational age was established between 9 to 29 weeks. Four patients with a 4 or more previous miscarriage background. There were two reported cases having a multiple gestation. Among the complications found, there were three cases of hipovolemic shock and one with abcess of vaginal cupula. The average days of hospitalization was 5.3 days. We found no mortality at all in this study, and the histopathologic correlation accorded in 100% of the cases. In this five year review, 12 cases of on block hysterectomy were found, being the most frequent reason for it's realization the persistent trophoblastic diseases; severe hemorrhage in second place, and serious infection process in third. The observed complications were derived from the hemodynamic compromise of each patient. Even though on block hysterectomy is one rarely seen procedure, it most be in mind as an alternative therapeutical instance it most be carried out in third level institutions, with technology and human resources capable of solving any complication derived from this kind of surgery.
Design and realization of an all-fiber broadband tunable gain equalization filter for DWDM signals.
Varshney, R K; Nagaraju, B; Singh, A; Pal, B P; Kar, A K
2007-10-17
Design and fabrication of a tunable gain equalization filter for dense wavelength division multiplexed (DWDM) signals through erbium doped fiber amplifiers (EDFA) is reported. It is based on a side-polished fiber (SPF) half-coupler block loaded with a displaceable tapered multimode overlay waveguide (MMOW). A simple and accurate normal mode analysis is employed to design this filtering device for its subsequent realization. Equalization of a typical EDFA gain spectrum in the C-band within +/-0.35 dB or even less in the presence of various ITU standard C-band DWDM signal channels is demonstrated under varied operating conditions like add/drop of signals. Tunability of the filter notch is achieved through displacement of the SPF relative to the MMOW.
Control of Block Copolymer Morphology through End-functional Groups
Jo, Gyuha; Park, Moon Jeong
2014-03-01
Recently, poly(ethylene oxide) (PEO)-containing polymer electrolytes have attracted significant attention to be applied for lithium batteries. As the realization of high mechanical strength from the polymer electrolyte becomes of critical importance in high-energy lithium batteries, much effort has been devoted to developing PEO-based block copolymers comprising mechanically robust polymer chains. Interest in this topic has been further stimulated by multiple observations of significant electrolytic conductivity enhancement imparted by microphase separation of block copolymers. In the present study, we report an intriguing methodology for modulating the morphology of poly(styrene-ethylene oxide) (PS-PEO) block copolymers with a single ionic group tethered at the chain end of PEO. Unique intra- and inter-chain interactions deduced from the end functional group afforded enriched nanostructures, i.e. disorder, lamellae, hexagonal cylinder, and gyroid, with significant differences in conductivities depending on lithium salt concentration. In particular, a gyorid morphology with a twofold-enhanced lithium ion transport efficiency was found for the end-functionalized PS-PEO block copolymer, attributed to the structural advantages of the gyroid having co-continuous ionic channels.
Farquharson, B. [Gemcom Software International (Australia)
2010-02-15
The paper explains how Colombian coal producer and exporter, Carbones del Cerrejon, has increased recovered coal with an end-to-end mine planning solution. It was Gemcon's Minex software for geology and mine planning. 4 photos.
US Fish and Wildlife Service, Department of the Interior — The Swan Lake National Wildlife Refuge Safety Plan discusses policies for the safety of the station employees, volunteers, and public. This plan seeks to identify...
Gabel, Medard
1984-01-01
To solve societal problems, both local and global, a global approach is needed. Serious diseases that are crippling present-day problem solving and planning are discussed, and the characteristics of a healthy, effective planning approach are described. (RM)
Realizable Paths and the NL vs L Problem
Kintali, Shiva
2010-01-01
A celebrated theorem of Savitch states that NSPACE(S) is contained in DSPACE(S^2). In particular, Savitch gave a deterministic algorithm to solve ST-CONNECTIVITY (an NL-complete problem) using O(log^2{n}) space, implying NL is in DSPACE(log^2{n}). While Savitch's theorem itself has not been improved in the last four decades, studying the space complexity of several special cases of ST-CONNECTIVITY has provided new insights into the space-bounded complexity classes. In this paper, we introduce new kind of graph connectivity problems which we call graph realizability problems. All of our graph realizability problems are generalizations of UNDIRECTED ST-CONNECTIVITY. ST-REALIZABILITY, the most general graph realizability problem, is LogCFL-complete. We define the corresponding complexity classes that lie between L and LogCFL and study their relationships. As special cases of our graph realizability problems we define two natural problems, BALANCED ST-CONNECTIVITY and POSITIVE BALANCED ST-CONNECTIVITY, that lie b...
Scaling and memory in the return intervals of realized volatility
Ren, Fei; Gu, Gao-Feng; Zhou, Wei-Xing
2009-11-01
We perform return interval analysis of 1-min realized volatility defined by the sum of absolute high-frequency intraday returns for the Shanghai Stock Exchange Composite Index (SSEC) and 22 constituent stocks of SSEC. The scaling behavior and memory effect of the return intervals between successive realized volatilities above a certain threshold q are carefully investigated. In comparison with the volatility defined by the closest tick prices to the minute marks, the return interval distribution for the realized volatility shows a better scaling behavior since 20 stocks (out of 22 stocks) and the SSEC pass the Kolmogorov-Smirnov (KS) test and exhibit scaling behaviors, among which the scaling function for 8 stocks could be approximated well by a stretched exponential distribution revealed by the KS goodness-of-fit test under the significance level of 5%. The improved scaling behavior is further confirmed by the relation between the fitted exponent γ and the threshold q. In addition, the similarity of the return interval distributions for different stocks is also observed for the realized volatility. The investigation of the conditional probability distribution and the detrended fluctuation analysis (DFA) show that both short-term and long-term memory exists in the return intervals of realized volatility.
Constraint Complexity of Realizations of Linear Codes on Arbitrary Graphs
Kashyap, Navin
2008-01-01
A graphical realization of a linear code C consists of an assignment of the coordinates of C to the vertices of a graph, along with a specification of linear state spaces and linear ``local constraint'' codes to be associated with the edges and vertices, respectively, of the graph. The $\\k$-complexity of a graphical realization is defined to be the largest dimension of any of its local constraint codes. $\\k$-complexity is a reasonable measure of the computational complexity of a sum-product decoding algorithm specified by a graphical realization. The main focus of this paper is on the following problem: given a linear code C and a graph G, how small can the $\\k$-complexity of a realization of C on G be? As useful tools for attacking this problem, we introduce the Vertex-Cut Bound, and the notion of ``vc-treewidth'' for a graph, which is closely related to the well-known graph-theoretic notion of treewidth. Using these tools, we derive tight lower bounds on the $\\k$-complexity of any realization of C on G. Our...
Management of purchase process in realization of building investment
M. Radoń
2010-07-01
Full Text Available In building companies process of product and service purchase is one of the main processes of quality management system [1]. Because ofshort time-limits of contract realization, high specialization of works, necessity of fulfillment of high quality requirements and assurance of profitable financial effects the management of purchase process becomes very important element of work of the building company. The serious problem in creating and keeping the efficient system of purchase management is special type of purchase in building companies. Particular investments are realized in different country regions, objects are built based on the individual design documentations and each building becomes independent organization unit that organize purchase necessary for investment realization.An example of the management system of purchase process in building company is described in the paper. Just In Time system is widelyused during the realization of building investment. This system is especially useful in buildings because some investments, especially inbig cities, are characterized by restriction in building site. This makes impossible storing the products. In such cases close synchronization between times of delivery and requirements of purchase schedule and schedule of building realization is very important. Criteria of supplier selection as well as the methods of choosing the supplier are also presented in the paper. Special attention is paid to necessity of valuation of the purchase efficiency and the purchase risk. Basic coefficients of purchase efficiency are also described in the paper.
Contrasting reduced overshadowing and blocking.
Wheeler, Daniel S; Miller, Ralph R
2007-07-01
Preexposure of a cue without an outcome (X-) prior to compound pairings with the outcome (XZ-->O) can reduce overshadowing of a target cue (Z). Moreover, pairing a cue with an outcome (X-->O) before compound training can enhance its ability to compete with another cue (i.e., blocking). Four experiments were conducted in a conditioned bar-press suppression preparation with rats to determine whether spacing of the X- or X-->O trials would differentially affect reduced overshadowing and blocking. Experiment 1a showed that reduced overshadowing was larger with massed trials than with spaced trials. Experiment 1b found that blocking was larger with spaced trials than with massed trials. Experiments 2a and 2b indicated that these effects of trial spacing were both mediated by the associative status of the context at test. The results are interpreted in the framework of contemporary learning theories.
Diversity Gain through Antenna Blocking
V. Dehghanian
2012-01-01
Full Text Available As part of the typical usage mode, interaction between a handheld receiver antenna and the operator's RF absorbing body and nearby objects is known to generate variability in antenna radiation characteristics through blocking and pattern changes. It is counterintuitive that random variations in blocking can result in diversity gain of practical applicability. This diversity gain is quantified from a theoretical and experimental perspective. Measurements carried out at 1947.5 MHz verify the theoretical predictions, and a diversity gain of 3.1 dB was measured through antenna blocking and based on the utilized measurement setup. The diversity gain can be exploited to enhance signal detectability of handheld receivers based on a single antenna in indoor multipath environments.
Power, June
2011-01-01
Many libraries have disaster recovery plans, but not all have prevention and action plans to prepare for an emergency in advance. This article presents the author's review of the prevention and action plans of several libraries: (1) Evergreen State College; (2) Interlochen Public Library; (3) University of Maryland, Baltimore-Marshall Law Library;…
Power, June
2011-01-01
Many libraries have disaster recovery plans, but not all have prevention and action plans to prepare for an emergency in advance. This article presents the author's review of the prevention and action plans of several libraries: (1) Evergreen State College; (2) Interlochen Public Library; (3) University of Maryland, Baltimore-Marshall Law Library;…
Block ground interaction of rockfalls
Volkwein, Axel; Gerber, Werner; Kummer, Peter
2016-04-01
During a rockfall the interaction of the falling block with the ground is one of the most important factors that define the evolution of a rockfall trajectory. It steers the rebound, the rotational movement, possibly brake effects, friction losses and damping effects. Therefore, if most reliable rockfall /trajectory simulation software is sought a good understanding of the block ground interaction is necessary. Today's rockfall codes enable the simulation of a fully 3D modelled block within a full 3D surface . However, the details during the contact, i.e. the contact duration, the penetration depth or the dimension of the marks in the ground are usually not part of the simulation. Recent field tests with rocks between 20 and 80 kg have been conducted on a grassy slope in 2014 [1]. A special rockfall sensor [2] within the blocks measured the rotational velocity and the acting accelerations during the tests. External video records and a so-called LocalPositioningSystem deliver information on the travel velocity. With these data not only the flight phases of the trajectories but also the contacts with the ground can be analysed. During the single jumps of a block the flight time, jump length, the velocity, and the rotation are known. During the single impacts their duration and the acting accelerations are visible. Further, the changes of rotational and translational velocity influence the next jump of the block. The change of the rotational velocity over the whole trajectory nicely visualizes the different phases of a rockfall regarding general acceleration and deceleration in respect to the inclination and the topography of the field. References: [1] Volkwein A, Krummenacher B, Gerber W, Lardon J, Gees F, Brügger L, Ott T (2015) Repeated controlled rockfall trajectory testing. [Abstract] Geophys. Res. Abstr. 17: EGU2015-9779. [2] Volkwein A, Klette J (2014) Semi-Automatic Determination of Rockfall Trajectories. Sensors 14: 18187-18210.
EMPOWER. Deliverable no 7.1 Dissemination Plan
Meeuwissen, M.; Fioreze, T.; Thomas, T.; Pickerden, C.; Hof, T.
2015-01-01
This deliverable describes the general plan regarding all dissemination activities of the consortium partners and work packages during the project. This links directly to D7.4 where the realization of different dissemination activities will be reported.
EMPOWER. Deliverable no 7.1 Dissemination Plan
Meeuwissen, M.; Fioreze, T.; Thomas, T.; Pickerden, C.; Hof, T.
2015-01-01
This deliverable describes the general plan regarding all dissemination activities of the consortium partners and work packages during the project. This links directly to D7.4 where the realization of different dissemination activities will be reported.
Atomic spin-chain realization of a model for quantum criticality
Toskovic, R.; van den Berg, R.; Spinelli, A.; Eliens, I. S.; van den Toorn, B.; Bryant, B.; Caux, J.-S.; Otte, A. F.
2016-07-01
The ability to manipulate single atoms has opened up the door to constructing interesting and useful quantum structures from the ground up. On the one hand, nanoscale arrangements of magnetic atoms are at the heart of future quantum computing and spintronic devices; on the other hand, they can be used as fundamental building blocks for the realization of textbook many-body quantum models, illustrating key concepts such as quantum phase transitions, topological order or frustration as a function of system size. Here, we use low-temperature scanning tunnelling microscopy to construct arrays of magnetic atoms on a surface, designed to behave like spin-1/2 XXZ Heisenberg chains in a transverse field, for which a quantum phase transition from an antiferromagnetic to a paramagnetic phase is predicted in the thermodynamic limit. Site-resolved measurements on these finite-size realizations reveal a number of sudden ground state changes when the field approaches the critical value, each corresponding to a new domain wall entering the chains. We observe that these state crossings become closer for longer chains, suggesting the onset of critical behaviour. Our results present opportunities for further studies on quantum behaviour of many-body systems, as a function of their size and structural complexity.
This array of 96 lead glass bricks formed part of the OPAL electromagnetic calorimeter. One half of the complete calorimeter is shown in the picture above. There were 9440 lead glass counters in the OPAL electromagnetic calorimeter. These are made of Schott type SF57 glass and each block weighs about 25 kg and consists of 76% PbO by weight. Each block has a Hamamatsu R2238 photomultiplier glued on to it. The complete detector was in the form of a cylinder 7m long and 6m in diameter. It was used to measure the energy of electrons and photons produced in LEP interactions.
RESEMBLANCE OF INDIRECTNESS IN POLITENESS OF EFL LEARNERS’ REQUEST REALIZATIONS
Indawan Syahri
2013-07-01
Full Text Available Abstract: Politeness principles are universally utilized by the speakers of any language when realizing various speech acts. However, the speakers of particular languages relatively apply politeness due to the cultural norms embedded. The present study attempts to delineate how the Indonesian learners of English (ILE apply the politeness principles in request realizations. Specifically it devotes to the types of politeness strategies applied and resemblance of the indirectness in politeness strategies in requesting acts. The FTAs and indirectness are the theoretical bases used to trace the typologies of both politeness and request strategies. The data werere collected by means of certain elicitation techniques, i.e. DCTs and Role-plays. The analyses werere done through three stages; determining request strategies, politeness strategies, and resemblance of indirectness in politeness. The results show that the indirectness generally is parallel to politeness. Besides, some pragmatic transfers are found in terms of applying native-culture norms in realizing target speech acts.
Synchronization for the Realization-Dependent Probabilistic Boolean Networks.
Chen, Hongwei; Liang, Jinling; Lu, Jianquan; Qiu, Jianlong
2017-01-24
This paper investigates the synchronization problem for the realization-dependent probabilistic Boolean networks (PBNs) coupled unidirectionally in the drive-response configuration. The realization of the response PBN is assumed to be uniquely determined by the realization signal generated by the drive PBN at each discrete time instant. First, the drive-response PBNs are expressed in their algebraic forms based on the semitensor product method, and then, a necessary and sufficient condition is presented for the synchronization of the PBNs. Second, by resorting to a newly defined matrix operator, the reachable set from any initial state is expressed by a column vector. Consequently, an easily computable algebraic criterion is derived assuring the synchronization of the drive-response PBNs. Finally, three illustrative examples are employed to demonstrate the applicability and usefulness of the developed theoretical results.
Experimental realization of an achromatic magnetic mirror based on metamaterials.
Pisano, Giampaolo; Ade, Peter A R; Tucker, Carole
2016-06-20
Our work relates to the use of metamaterials engineered to realize a metasurface approaching the exotic properties of an ideal object not observed in nature, a "magnetic mirror." Previous realizations were based on resonant structures that implied narrow bandwidths and large losses. The working principle of our device is ideally frequency-independent, it does not involve resonances and it does not rely on a specific technology. The performance of our prototype, working at millimeter wavelengths, has never been achieved before and it is superior to any other device reported in the literature, both in the microwave and optical regions. The device inherently has large bandwidth (144%), low losses (<1%), and is almost independent of incidence angle and polarization state, and thus approaches the behavior of an ideal magnetic mirror. Applications of magnetic mirrors range from low-profile antennas, absorbers to optoelectronic devices. Our device can be realized using different technologies to operate in other spectral regions.
Using a quantum dot system to realize perfect state transfer
Li Ji; Wu Shi-Hai; Zhang Wen-Wen; Xi Xiao-Qiang
2011-01-01
There are some disadvantages to Nikolopoulos et al.'s protocol [Nikolopoulos G M,Petrosyan D and Lambropoulos P 2004 Europhys.Lett.65 297] where a quantum dot system is used to realize quantum communication.To overcome these disadvantages,we propose a protocol that uses a quantum dot array to construct a four-qubit spin chain to realize perfect quantum state transfer (PQST).First,we calculate the interaction relation for PQST in the spin chain.Second,we review the interaction between the quantum dots in the Heitler-London approach.Third,we present a detailed program for designing the proper parameters of a quantum dot array to realize PQST.
Realization of Multistage FIR Filters using Pipelining-Interleaving
M. Ciric
2012-11-01
Full Text Available Multistage digital filters can be one of the solutions for the realization of filters with a narrow transition zone. If requirements for the width of transition zone are too strict, then they are the only alternative, and the decimation/interpolation must be performed in several steps. Combining decimation/interpolation operations related to the implementation of multi-channel filters in the PI (pipelining/interleaving technique can give an efficient structure of multichannel multistage filter. Using the advantages offered by newer generations of FPGA chips in terms of digital design structure, it is possible to realize such filters with considerable savings of hardware resources and reduce the effect of finite length codeword. This paper proposes such an efficient implementation and presents the results of such a realization with FPGA components.
Realizing a lattice spin model with polar molecules
Yan, Bo; Gadway, Bryce; Covey, Jacob P; Hazzard, Kaden R A; Rey, Ana Maria; Jin, Deborah S; Ye, Jun
2013-01-01
With the recent production of polar molecules in the quantum regime, long-range dipolar interactions are expected to facilitate the understanding of strongly interacting many-body quantum systems and to realize lattice spin models for exploring quantum magnetism. In atomic systems, where interactions require wave function overlap, effective spin interactions on a lattice can be realized via superexchange; however, the coupling is weak and limited to nearest-neighbor interactions. In contrast, dipolar interactions exist in the absence of tunneling and extend beyond nearest neighbors. This allows coherent spin dynamics to persist even at high entropy and low lattice filling. Effects of dipolar interactions in ultracold molecular gases have so far been limited to the modification of chemical reactions. We now report the observation of dipolar interactions of polar molecules pinned in a 3D optical lattice. We realize a lattice spin model with spin encoded in rotational states, prepared and probed by microwaves. T...
Railroad Redevelopment Planning.
1981-01-01
and 30 specialty food kiosks are plannes to occupy approximately one half of the available area. Twenty to twenty-five specialty retail stores with 10...1977, the fate of the building was up In the air. However, In August, 1980 the Union Terminal reopened with a new use - a shopping mall . The developer...study for a new hotel and convention center In the Immediate area. A new In town shopping mall was planned within four blocks of the station. - -t -~ .2
An Intelligent Agency Framework to Realize Adaptive System Management
FU Yu; SHEN Jun-yi; FENG Zhong-hui; WANG Yong
2007-01-01
In order to realize the required scalable and adaptive system management, an interactive intelligent agency framework, iSMAcy (intelligent System Management Agency), is proposed as an integrated solution to realize distributed autonomous system management. Firstly, it is a multiagent platform that supports inter-agent communication and cooperation. Secondly, the functional agents are based on intentional agent architecture that achieves balance between goal-directed behavior and situated reactive action. An example of applying the iSMAcy system to a network management environment has been described to illustrate and validate the scalable and adaptive management capability of the intelligent agency framework.
Nonlinear gauge realization of spacetime symmetries including translations
Julve, J; Tiemblo, A; Tresguerres, R; Julve, J; Tiemblo, A; Tresguerres, R
1994-01-01
We present a general scheme for the nonlinear gauge realizations of spacetime groups on coset spaces of the groups considered. In order to show the relevance of the method for the rigorous treatment of the translations in gravitational gauge theories, we apply it in particular to the affine group. This is an illustration of the family of spacetime symmetries having the form of a semidirect product H\\semidirect T, where H is the stability subgroup and T are the translations . The translational component of the connection behaves like a true tensor under H when coset realizations are involved.
Design and elementary realization of the Vision Earth System
无
2007-01-01
The Vision Earth System is a interactive system by employing B/S model. The system has the function of query display and mutuaUy displays relevant geologic information, integrating image information of one outcrop and realizing 3D geologic visualization. In this system, the basis is effective store, transmitting, display and quick query of enormous images and their properties data. From Java technology, this essay researches the elementary realization of Vision Earth System by adopting store formality of enormous images database,quick display image of website and quick image storage method.
Polylingual Education Realization, Based on Ethnolingual Didactic Approach
Gulnara T. Smagulova
2013-01-01
Full Text Available The article examines the problems of polylingual education development in the context of the state program documents, particularly determines socio-pedagogical factors of its realization. The author presents the study of current sociolinguistic issues by means of educational measurement. The article gives brief analysis of ethnolingual didactics definitions by different sources. Ethnolingual didactic approach is defined as the strategic methodological feature for the realization of polylingual education, which is the trinity of individual education, upbringing and development as a polylingual personality on the basis of simultaneous acquisition of several languages.
Research and realization of info-net security controlling system
Xu, Tao; Zhang, Wei; Li, Xuhong; Wang, Xia; Pan, Wenwen
2017-03-01
The thesis introduces some relative concepts about Network Cybernetics, and we design and realize a new info-net security controlling system based on Network Cybernetics. The system can control the endpoints, safely save files, encrypt communication, supervise actions of users and show security conditions, in order to realize full-scale security management. At last, we simulate the functions of the system. The results show, the system can ensure the controllability of users and devices, and supervise them real-time. The system can maximize the security of the network and users.
Hysteresis model of magnetostrictive actuators and its numerical realization
TANG Zhi-feng; LV Fu-zai; XIANG Zhan-qin
2007-01-01
This paper presents two numerical realization of Preisach model by Density Function Method (DFM) and F Function Method (FFM) for a giant magnetostrictive actuator (GMA). Experiment and simulation showed that FFM is better than DFM for predicting precision of hysteresis loops. Lagrange bilinear interpolation algorithm is used in Preisach numerical realization to enhance prediction performance. A set of hysteresis loops and higher order reversal curves are predicted and experimentally verified. The good agreement between the measured and predicted curves shows that the classical Preisach model is effective for modelling the quasi-static hysteresis of the GMA.
Optical Realization of Deterministic Entanglement Concentration of Polarized Photons
GU Yong-Jian; XIAN Liang; LI Wen-Dong; MA Li-Zhen
2008-01-01
@@ We propose a scheme for optical realization of deterministic entanglement concentration of polarized photons.To overcome the difficulty due to the lack of sufficiently strong interactions between photons, teleportation is employed to transfer the polarization states of two photons onto the path and polarization states of a third photon, which is made possible by the recent experimental realization of the deterministic and complete Bell state measurement. Then the required positive operator-valued measurement and further operations can be implemented deterministically by using a linear optical setup. All these are within the reach of current technology.
Experimental realization of entanglement concentration and a quantum repeater.
Zhao, Zhi; Yang, Tao; Chen, Yu-Ao; Zhang, An-Ning; Pan, Jian-Wei
2003-05-23
We report an experimental realization of entanglement concentration using two polarization-entangled photon pairs produced by pulsed parametric down-conversion. In the meantime, our setup also provides a proof-in-principle demonstration of a quantum repeater. The quality of our procedure is verified by observing a violation of Bell's inequality by more than 5 standard deviations. The high experimental accuracy achieved in the experiment implies that the requirement of tolerable error rate in multistage realization of quantum repeaters can be fulfilled, hence providing a useful toolbox for quantum communication over large distances.
Higher-order Brunnian structures and possible physical realizations
A. Baas, Nils; V. Fedorov, D.; S. Jensen, A.
2014-01-01
to the binding of systems in nature. It now appears that recent generalization to higher order Brunnian structures may potentially be realized as laboratory made or naturally occurring systems. With the binding energy as measure, we discuss possibilities of physical realization in nuclei, cold atoms......, and condensed matter systems. Appearance is not excluded. However, both the form and the strengths of the interactions must be rather special. The most promising subfields for present searches would be in cold atoms because of external control of effective interactions, or perhaps in condensed-matter systems...
Humanoid Robot 3 -D Motion Simulation for Hardware Realization
CAO Xi; ZHAO Qun-fei; MA Pei-sun
2007-01-01
In this paper, three dimensions kinematics andkinetics simulation arc discussed for hardware realization ofa physical biped walking-chair robot. The direct and inverseclose-form kinematics solution of the biped walking-chairis deduced. Several gaits are realized with thekinematics solution, including walking straight on levelfloor, going up stair, squatting down and standing up. ZeroMoment Point(ZMP) equation is analyzed considering themovement of the crew. The simulated biped walking-chairrobot is used for mechanical design, gaits development andvalidation before they are tested on real robot.
Sign and Quantiles of the Realized Stock-Bond Correlation
Aslanidis, Nektarios; Christiansen, Charlotte
We scrutinize the monthly realized stock-bond correlation based upon high frequency returns. In particular, we use a probit model to track the dynamics of the sign of the correlation relative to its various economic forces. The sign is predictable to a large extent with bond market liquidity being...... the most important variable. Moreover, stock market volatility, inflation uncertainty, short rate volatility, and bond volatility have significant effects upon the sign. In addition, we use quantile regressions to pin down the systematic variation of the extreme tails of the realized stock-bond correlation...... of the stock-bond correlation....
Realization of the Three-Qubit Toffoli Gate in Molecules
DU Jiang-Feng; SHI Ming-Jun; ZHOU Xian-Yi; FAN Yang-Mei; WU Ji-Hui; YE Bang-Jiao; WENG Hui-Min; HAN Rong-Dian
2000-01-01
We present the experimental realization of this gate with a solution of chlorostyrene molecules. Our method does not depend heavily on the two-qubit controlled operation, which used to serve as the basic quantum operation in quantum computing. At present, we use transition operator that can be applied to all qubits in one operation.It appears that no experimental realization has yet been reported up to now regarding the implementation of quantum Toffoli gate using transition pulse on three-qubit nuclear magnetic resonance quantum computers. In addition, our method is experimentally convenient to be extended to more qubits.
A completely transparent, adhesively bonded soda-lime glass block masonry system
F. Oikonomopoulou
2015-01-01
Full Text Available A pioneering, all transparent, self-supporting glass block facade is presented in this paper. Previously realized examples utilize embedded metal components in order to obtain the desired structural performance despite the fact that these elements greatly affect the facade’s overall transparency level. Undeniably, the oxymoron ‘transparency and strength’ remains the prime concern in such applications. In this paper, a new, innovative structural system for glass block facades is described, which demonstrably meets both criteria. The structure is exclusively constructed by monolithic glass blocks, bonded with a colourless, UV-curing adhesive, obtaining thus a maximum transparency. In addition, the desired structural performance is achieved solely through the masonry system, without any opaque substructure. Differing from previous realized projects, solid soda-lime glass blocks are used rather than borosilicate ones. This article provides an overview of the integrated architectural and structural design and discusses the choice of materials. The structural verification of the system is demonstrated. The results show that the adhesively bonded glass block structure has the required self-structural behaviour, but only if strict tolerances are met in the geometry of the glass blocks.
Usage of dynamic plans in civil engineering of Serbia
Zlatanović Milorad
2011-01-01
Full Text Available For a successful realization of a civil engineering project, it is necessary to possess good quality dynamic plans of construction works and of resource involvement. Depending on the type and size of the structure, appropriate type of dynamic plan ought to be used. The plan realization must constantly be observed and updated in order to ensure their full effectiveness. This paper presents the results of a research through a survey of dynamic plan implementation in our civil engineering practice. The results are based on the data processed from the responses to the questions asked in the survey of 45 construction enterprises in Serbia.
Simulation of spinal nerve blocks for training anesthesiology residents
Blezek, Daniel J.; Robb, Richard A.; Camp, Jon J.; Nauss, Lee A.; Martin, David P.
1998-06-01
Deep nerve regional anesthesiology procedures, such as the celiac plexus block, are challenging to learn. The current training process primarily involves studying anatomy and practicing needle insertion is cadavers. Unfortunately, the training often continues on the first few patients subjected to the care of the new resident. To augment the training, we have developed a virtual reality surgical simulation designed to provide an immersive environment in which an understanding of the complex 3D relationships among the anatomic structures involved can be obtained and the mechanics of the celiac block procedure practiced under realistic conditions. Study of the relevant anatomy is provided by interactive 3D visualization of patient specific data nd the practice simulated using a head mounted display, a 6 degree of freedom tracker, and a haptic feedback device simulating the needle insertion. By training in a controlled environment, the resident may practice procedures repeatedly without the risks associated with actual patient procedures, and may become more adept and confident in the ability to perform nerve blocks. The resident may select a variety of different nerve block procedures to practice, and may place the virtual patient in any desired position and orientation. The preliminary anatomic models used in the simulation have been computed from the Visible Human Male; however, patient specific models may be generated from patient image data, allowing the physician to evaluate, plan, and practice difficult blocks and/or understand variations in anatomy before attempting the procedure on any specific patient.
Maloney, Alexander; Maxfield, Henry; Ng, Gim Seng
2017-06-01
We investigate the constraints of crossing symmetry on CFT correlation functions. Four point conformal blocks are naturally viewed as functions on the upper-half plane, on which crossing symmetry acts by PSL(2, Z ) modular transformations. This allows us to construct a unique, crossing symmetric function out of a given conformal block by averaging over PSL(2, Z ). In some two dimensional CFTs the correlation functions are precisely equal to the modular average of the contributions of a finite number of light states. For example, in the two dimensional Ising and tri-critical Ising model CFTs, the correlation functions of identical operators are equal to the PSL(2, Z ) average of the Virasoro vacuum block; this determines the 3 point function coefficients uniquely in terms of the central charge. The sum over PSL(2, Z ) in CFT2 has a natural AdS3 interpretation as a sum over semi-classical saddle points, which describe particles propagating along rational tangles in the bulk. We demonstrate this explicitly for the correlation function of certain heavy operators, where we compute holographically the semi-classical conformal block with a heavy internal operator.
Vagal Blocking for Obesity Control
Johannessen, Helene; Revesz, David; Kodama, Yosuke
2017-01-01
BACKGROUND: Recently, the US FDA has approved "vagal blocking therapy or vBLoc® therapy" as a new treatment for obesity. The aim of the present study was to study the mechanism-of-action of "VBLOC" in rat models. METHODS: Rats were implanted with VBLOC, an intra-abdominal electrical device...
Scattering matrices with block symmetries
Życzkowski, Karol
1997-01-01
Scattering matrices with block symmetry, which corresponds to scattering process on cavities with geometrical symmetry, are analyzed. The distribution of transmission coefficient is computed for different number of channels in the case of a system with or without the time reversal invariance. An interpolating formula for the case of gradual time reversal symmetry breaking is proposed.
Architectures for block Toeplitz systems
Bouras, Ilias; Glentis, George-Othon; Kalouptsidis, Nicholas
1996-01-01
In this paper efficient VLSI architectures of highly concurrent algorithms for the solution of block linear systems with Toeplitz or near-to-Toeplitz entries are presented. The main features of the proposed scheme are the use of scalar only operations, multiplications/divisions and additions, and th
Enduring and Diagnosing Reader's Block.
Melanson, Lisa Stapleton
1990-01-01
Describes a condition called "reader's block" whereby the mind fails to comprehend the meaning of the text because of digressing thoughts. Suggests that "freereading," like freewriting, can help to clarify thoughts. Argues that it is not necessary to read things correctly the first time through. (PRA)
Cryptanalysis of Selected Block Ciphers
Alkhzaimi, Hoda A.
ciphers initiatives, and the Competition for Authenticated Encryption: Security, Applicability, and Robustness (CAESAR). In this thesis, we first present cryptanalytic results on different ciphers. We propose attack named the Invariant Subspace Attack. It is utilized to break the full block cipher...
First Degree Pacemaker Exit Block
Johnson Francis
2016-10-01
Full Text Available Usually atrial and ventricular depolarizations follow soon after the pacemaker stimulus (spike on the ECG. But there can be an exit block due to fibrosis at the electrode - tissue interface at the lead tip. This can increase the delay between the spike and atrial or ventricular depolarization.
Building Blocks for Personal Brands
Thomas, Lisa Carlucci
2011-01-01
In this article, the author discusses the four essential building blocks for personal brands: (1) name; (2) message; (3) channels; and (4) bridges. However, outstanding building materials can only take a person so far. The author emphasizes that vision, determination, faith, a sense of humor, and humility are also required.
Experimental realization of one-way quantum computing with two-photon four-qubit cluster states.
Chen, Kai; Li, Che-Ming; Zhang, Qiang; Chen, Yu-Ao; Goebel, Alexander; Chen, Shuai; Mair, Alois; Pan, Jian-Wei
2007-09-21
We report an experimental realization of one-way quantum computing on a two-photon four-qubit cluster state. This is accomplished by developing a two-photon cluster state source entangled both in polarization and spatial modes. With this special source, we implemented a highly efficient Grover's search algorithm and high-fidelity two-qubit quantum gates. Our experiment demonstrates that such cluster states could serve as an ideal source and a building block for rapid and precise optical quantum computation.
Realization of a Quantum Scheduling Algorithm Using Nuclear Magnetic Resonance
ZHANG Jing-Fu; DENG Zhi-Wei; PAN Yan-Na; LU Zhi-Heng
2004-01-01
The quantum scheduling algorithm proposed by Grover is generalized to extend its scope of applications. The generalized algorithm proposed here is realized on a nuclear magnetic resonance quantum computer. The experimental results show that the generalized algorithm can work efficiently in the case that Grover's scheduling algorithm is completely invalid, and represent the quantum advantages when qubits replace classical bits.
Functional model realizations for Schur functions on C+
Kurula, Mikael; Ball, Joseph A.; Staffans, Olof J.; Zwart, Hans
2014-01-01
For an arbitrary given operator Schur function defined on the complex right-half plane, we give a controllable energy-preserving and an observable co-energy-preserving de Branges-Rovnyak functional model realization. Topics appearing only in the right-half-plane setting, such as the extrapolation sp
Smart Materials For The Realization Of An Adaptive Building Component
Lelieveld, C.M.J.L.
2013-01-01
This research focusses on the realization of adaptive architecture with the use of advanced material technology. Current material research has shown significant advances with the development of “smart” materials. Smart materials are “capable of automatically and inherently sensing or detecting chang
Canonical realization of Bondi-Metzner-Sachs symmetry: Quadratic Casimir
Gomis, Joaquim; Longhi, Giorgio
2016-01-01
We study the canonical realization of Bondi-Metzner-Sacks symmetry for a massive scalar field introduced by Longhi and Materassi [J. Math. Phys. 40, 480 (1999)]. We construct an invariant scalar product for the generalized momenta. As a consequence we introduce a quadratic Casimir with the supertranslations.
Government 2.0: key challenges to its realization
Meijer, Albert Jacob; Koops, Bert-Jaap; Pieterson, Willem Jan; Overman, Sjors; ten Tije, Sanne
2012-01-01
Government 2.0 is often presented as a means to reinforce the relation between state and citizens in an information age. The promise of Government 2.0 is impressive but its potential has not or hardly been realized yet in practice. This paper uses insights from various disciplines to understand
A New Procedure for Stochastic Realization of Spectral Density Matrices
Schaft, A.J. van der; Willems, J.C.
1984-01-01
In this paper we consider the problem of obtaining a state space realization of a zero mean gaussian vector process. A new algorithm is presented for the case in which the process is given in terms of its spectral density function. Contrary to the usual procedure followed, which requires a partial f
A new procedure for stochastic realization of spectral density matrices
Schaft, van der A.J.; Willems, J.C.
1984-01-01
In this paper we consider the problem of obtaining a state space realization of a zero mean gaussian vector process. A new algorithm is presented for the case in which the process is given in terms of its spectral density function. Contrary to the usual procedure followed, which requires a partial f
Singular Value Analysis and Balanced Realizations for Nonlinear Systems
Fujimoto, Kenji; Scherpen, Jacquelien M.A.; Rommes, Joost; Schilders, Wilhelmus H.A.; Vorst, Henk A. van der
2008-01-01
For linear control systems minimal realization theory and the related model reduction methods play a crucial role in understanding and handling the system. These methods are well established and have proved to be very successful. In particular the method called balanced truncation gives a good
Properties of realized variance under alternative sampling schemes
Oomen, R.C.A.
2006-01-01
This paper investigates the statistical properties of the realized variance estimator in the presence of market microstructure noise. Different from the existing literature, the analysis relies on a pure jump process for high frequency security prices and explicitly distinguishes among alternative
Realized Bond-Stock Correlation: Macroeconomic Announcement Effects
Christiansen, Charlotte; Ranaldo, Angelo
2005-01-01
We investigate the effects of macroeconomic announcements on the realized correlation between bond and stock returns. Our results deliver insights into the dominating drivers of bond-stock comovements. We find that it is not so much the surprise component of the announcement, but the mere fact th...
Smart Materials For The Realization Of An Adaptive Building Component
Lelieveld, C.M.J.L.
2013-01-01
This research focusses on the realization of adaptive architecture with the use of advanced material technology. Current material research has shown significant advances with the development of “smart” materials. Smart materials are “capable of automatically and inherently sensing or detecting
The transversal flow microfiltration module: theory, design, realization and experiments
Knops, F.N.M.; Futselaar, H.; Rácz, I.G.
1992-01-01
This study shows that the permeate flux in microfiltration can be inscreased without increasing energy consumption, by using the hollow fiber membranes themselves as turbulence promoters. This is realized by using shell-side fed hollow fibers, which are placed perpendicular to the feed stream. This
An Incremental Approach to Support Realization of Modularization Benefits
Hansen, Poul H. Kyvsgård; Sun, Hongyi
2010-01-01
In general, the phenomenon of managing modularization is not well known. The cause-effect relationships between modularization and realized benefits are complex and comprehensive. Though a number of research works have contributed to the study of the phenomenon of efficient and effective modulari...
Realizability Semantics for Quantified Modal Logic : Generalizing Flagg's 1985 Construction
Rin, B.G.; Walsh, Sean
2016-01-01
A semantics for quantified modal logic is presented that is based on Kleene’s notion of realizability. This semantics generalizes Flagg’s 1985 construction of a model of a modal version of Church’s Thesis and first-order arithmetic. While the bulk of the paper is devoted to developing the details of
A symmetry for vanishing cosmological constant: Another realization
Erdem, R
2006-01-01
A more conventional realization of a symmetry which had been proposed towards the solution of cosmological constant problem is considered. In this study the multiplication of the coordinates by the imaginary number $i$ in the literature is replaced by the multiplication of the metric tensor by minus one. This realization of the symmetry as well forbids a bulk cosmological constant and selects out $2(2n+1)$ dimensional spaces. On contrary to its previous realization the symmetry, without any need for its extension, also forbids a possible cosmological constant term which may arise from the extra dimensional curvature scalar provided that the space is taken as the union of two $2(2n+1)$ dimensional spaces where the usual 4-dimensional space lies at the intersection of these spaces. It is shown that this symmetry may be realized as translations in the extra dimensions of a non-orientable space. A possible relation of this symmetry to the E-parity symmetry of Linde is also pointed out.
Exploring Phonetic Realization in Danish by Transformation-Based Learning
Uneson, Marcus; Schachtenhaufen, Ruben
2011-01-01
We align phonemic and semi-narrow phonetic transcriptions in the DanPASS corpus and extend the phonemic description with sound classes and with traditional phonetic features. From this representation, we induce rules for phonetic realization by Transformation-Based Learning (TBL). The rules thus...
Reading on the Internet: Realizing and Constructing Potential Texts
Cho, Byeong-Young; Afflerbach, Peter
2015-01-01
Successful Internet reading requires making strategic decisions about what texts to read and a sequence for reading them, all in accordance with readers' goals. In this paper, we describe the process of realizing and constructing potential texts as an important and critical part of successful Internet reading and use verbal report data to…
Realization of Lossless Systems Via Constant Matrix Factorizations
Rapisarda, Paolo; Rao, Shodhan
2013-01-01
We study the realization problem for linear time-invariant systems described by higher-order differential equations, which are J-lossless with constant J. Our approach is based on the factorization of a constant matrix obtained in a straightforward way from the storage function of the system. State
Ethos and Vision Realization in Sponsored Academy Schools
Gibson, Mark T.
2015-01-01
This article investigates the realization of ethos and vision in the early stages of sponsored academy schools in England. It is a qualitative nested case study of ten academies. Nineteen key actors were interviewed, including principals and sponsor representatives. The nests were organized by sponsor type. Key themes are discussed within the…
Properties of realized variance under alternative sampling schemes
Oomen, R.C.A.
2006-01-01
This paper investigates the statistical properties of the realized variance estimator in the presence of market microstructure noise. Different from the existing literature, the analysis relies on a pure jump process for high frequency security prices and explicitly distinguishes among alternative s
Exploiting network redundancy for low-cost neural network realizations.
Keegstra, H; Jansen, WJ; Nijhuis, JAG; Spaanenburg, L; Stevens, H; Udding, JT
1996-01-01
A method is presented to optimize a trained neural network for physical realization styles. Target architectures are embedded microcontrollers or standard cell based ASIC designs. The approach exploits the redundancy in the network, required for successful training, to replace the synaptic weighting
Metamaterial-Based Cylinders Used for Invisible Cloak Realization
2011-08-01
Branimir Ivsic Tin Komljenovic University of Zagreb Faculty of Electrical Engineering and Computing Unska 3 Zagreb, Croatia HR-10000...PROGRAM ELEMENT NUMBER 61102F 6. AUTHOR(S) Zvonimir Sipus Dario Bojanjac Branimir Ivsic Tim Komljenovic 5d. PROJECT NUMBER 5d. TASK...Used for Invisible Cloak Realization by Zvonimir Sipus Dario Bojanjac Branimir Ivsic Tin Komljenovic
Realizing sub-wavelength imaging with evolutionary optimization
Zhang, Jingjing
2015-01-01
Here we propose an approach to realize farfield subwavelength imaging lens by combining the transformation optics methodology with evolutionary optimization method. The lens is composed of an isotropic dielectric core and anisotropic or isotropic dielectric matching layer, of which the parameters...
Ethos and Vision Realization in Sponsored Academy Schools
Gibson, Mark T.
2015-01-01
This article investigates the realization of ethos and vision in the early stages of sponsored academy schools in England. It is a qualitative nested case study of ten academies. Nineteen key actors were interviewed, including principals and sponsor representatives. The nests were organized by sponsor type. Key themes are discussed within the…
Analysis of enabling factors in realizing modularization benefits
Storbjerg, Simon Haahr; Brunø, Thomas Ditlev
2012-01-01
Although modularization is becoming a welldescribed and broadly applied concept, many of today’s firms still struggle to realize the promised benefits of this approach. Managing modularization is a complex matter, and in spite of this, a topic that has received far less attention compared to theo...
Analysis of enabling factors in realizing modularization benefits
Storbjerg, Simon Haahr; Brunø, Thomas Ditlev
2012-01-01
to theories and methods concerning modularization of technical systems.Recognizing the need for guidance to realize the benefits of modularity, the purpose of this study is through a literature study and a case study to improve the insight into the organizational and systems related enablers and barriers...
Endoscopic sphenopalatine ganglion block for pain relief
Murty, P. S. N.; Prasanna, Atma
1998-01-01
The anaesthetic effect of the sphenopalatine (SPG) block has been well utilized for intranasal topical anaesthesia but the analgesic efficacy of (SPG) block, though well documented in literature, has not been put into practice. The methods available for SPG block till date were blind as they do not visualize the foramen. Nasal endoscopies have been used to visualize the foramen for an effective block. The authors present their experience with the endoscopic sphenopalatine ganglion block for p...
Pourfour Du Petit syndrome after interscalene block
Mysore Chandramouli Basappji Santhosh
2013-01-01
Full Text Available Interscalene block is commonly associated with reversible ipsilateral phrenic nerve block, recurrent laryngeal nerve block, and cervical sympathetic plexus block, presenting as Horner′s syndrome. We report a very rare Pourfour Du Petit syndrome which has a clinical presentation opposite to that of Horner′s syndrome in a 24-year-old male who was given interscalene block for open reduction and internal fixation of fracture upper third shaft of left humerus.
Pourfour Du Petit syndrome after interscalene block.
Santhosh, Mysore Chandramouli Basappji; Pai, Rohini B; Rao, Raghavendra P
2013-04-01
Interscalene block is commonly associated with reversible ipsilateral phrenic nerve block, recurrent laryngeal nerve block, and cervical sympathetic plexus block, presenting as Horner's syndrome. We report a very rare Pourfour Du Petit syndrome which has a clinical presentation opposite to that of Horner's syndrome in a 24-year-old male who was given interscalene block for open reduction and internal fixation of fracture upper third shaft of left humerus.
Limiting Spectral Distribution of Block Matrices with Toeplitz Block Structure
Basu, Riddhipratim; Ganguly, Shirshendu; Hazra, Rajat Subhra
2011-01-01
We study two specific symmetric random block Toeplitz (of dimension $k \\times k$) matrices: where the blocks (of size $n \\times n$) are (i) matrices with i.i.d. entries, and (ii) asymmetric Toeplitz matrices. Under suitable assumptions on the entries, their limiting spectral distributions (LSDs) exist (after scaling by $\\sqrt{nk}$) when (a) $k$ is fixed and $n \\to\\infty$ (b) $n$ is fixed and $k\\rightarrow \\infty$ (c) $n$ and $k$ go to $\\infty$ simultaneously. Further the LSD's obtained in (a) and (b) coincide with those in (c) when $n$ or respectively $k$ tends to infinity. This limit in (c) is the semicircle law in case (i). In Case (ii) the limit is related to the limit of the random symmetric Toepiltz matrix as obtained by Bryc et al.(2006) and Hammond and Miller(2005).
Vermont Physical Landscape Diversity Blocks
Vermont Center for Geographic Information — Act 174 requires plans to identify potential areas for the development and siting of renewable energy resources and areas that are unsuitable for siting those...
Vermont Highest Priority Connectivity Blocks
Vermont Center for Geographic Information — Act 174 requires plans to identify potential areas for the development and siting of renewable energy resources and areas that are unsuitable for siting those...
Tongwen Jiang
2017-01-01
Full Text Available The unusually ultra-deep and ultra-high-pressure gas reservoirs in the Keshen 8 Block on the Kelasu structural belt of the Tarim Basin are also featured by high temperature, well-developed fault fissures, huge thickness, tight matrix, complex oil–water distribution, etc., which brings about great difficulties to reserves evaluation and further development. In view of this, an overall study was made on the fine description of reservoir fractures and their seepage mechanism, technical problems were being tackled on seismic data processing and interpretation of complex and high & steep structural zones, optimal development design, safe & rapid drilling and completion wells, reservoir stimulation, dynamic monitoring, etc. to promote the development level of such ultra-deep tight gas reservoirs, and 22 complete sets of specific techniques were formulated in the fields of high-efficiency well spacing, safe and fast drilling, recovery enhancement by well completion transformation, efficient development of optimization design, and so on. Through the technical progress and innovative management of integrated exploration & development, reserves evaluation and productivity construction have been completed on the Keshen 8 Block in the last three years of the 12th Five-Year Plan period (2011–2015, as a result, rapid and high-efficiency productivity construction is realized, and a new area is explored in the development of ultra-deep and ultra-high-pressure fractured tight sand gas reservoirs. This study is of great reference to the development of similar gas reservoirs at home and abroad.
Towards the Realization of Graphene Based Flexible Radio Frequency Receiver
Maruthi N. Yogeesh
2015-11-01
Full Text Available We report on our progress and development of high speed flexible graphene field effect transistors (GFETs with high electron and hole mobilities (~3000 cm2/V·s, and intrinsic transit frequency in the microwave GHz regime. We also describe the design and fabrication of flexible graphene based radio frequency system. This RF communication system consists of graphite patch antenna at 2.4 GHz, graphene based frequency translation block (frequency doubler and AM demodulator and graphene speaker. The communication blocks are utilized to demonstrate graphene based amplitude modulated (AM radio receiver operating at 2.4 GHz.
On the Eigenvalues and Eigenvectors of Block Triangular Preconditioned Block Matrices
Pestana, Jennifer
2014-01-01
Block lower triangular matrices and block upper triangular matrices are popular preconditioners for 2×2 block matrices. In this note we show that a block lower triangular preconditioner gives the same spectrum as a block upper triangular preconditioner and that the eigenvectors of the two preconditioned matrices are related. © 2014 Society for Industrial and Applied Mathematics.
IDC Re-Engineering Phase 2 Iteration E3 Use Case Realizations Version 1.2
Hamlet, Benjamin R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Harris, James M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Burns, John F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2017-01-01
This document contains 4 use case realizations generated from the model contained in Rational Software Architect. These use case realizations are the current versions of the realizations originally delivered in Elaboration Iteration 3.
IDC Re-Engineering Phase 2 Iteration E1 Use Case Realizations version 1.2.
Hamlet, Benjamin R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Harris, James M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Burns, John F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Montoya, Mark Sinclair [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sandoval, Rudy Daniel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2016-12-01
This document contains 4 use case realizations generated from the model contained in Rational Software Architect. These use case realizations are the current versions of the realizations originally delivered in Elaboration Iteration 1.
IDC Re-Engineering Phase 2 Iteration E2 Use Case Realizations Version 1.2.
Hamlet, Benjamin R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Harris, James M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Burns, John F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lober, Randall R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Vickers, James Wallace [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2016-12-01
This document contains 4 use case realizations generated from the model contained in Rational Software Architect. These use case realizations are the current versions of the realizations originally delivered in Elaboration Iteration 2.
Graphs obtained from collections of blocks
Colton Magnant
2015-03-01
Full Text Available Given a collection of $d$-dimensional rectangular solids called blocks, no two of which sharing interior points, construct a block graph by adding a vertex for each block and an edge if the faces of the two corresponding blocks intersect nontrivially. It is known that if $d \\geq 3$, such block graphs can have arbitrarily large chromatic number. We prove that the chromatic number can be bounded with only a mild restriction on the sizes of the blocks. We also show that block graphs of block configurations arising from partitions of $d$-dimensional hypercubes into sub-hypercubes are at least $d$-connected. Bounds on the diameter and the hamiltonicity of such block graphs are also discussed.
Maloney, Alexander; Ng, Gim Seng
2016-01-01
We investigate the constraints of crossing symmetry on CFT correlation functions. Four point conformal blocks are naturally viewed as functions on the upper-half plane, on which crossing symmetry acts by PSL(2,Z) modular transformations. This allows us to construct a unique, crossing symmetric function out of a given conformal block by averaging over PSL(2,Z). In some two dimensional CFTs the correlation functions are precisely equal to the modular average of the contributions of a finite number of light states. For example, in the two dimensional Ising and tri-critical Ising model CFTs, the correlation functions of identical operators are equal to the PSL(2,Z) average of the Virasoro vacuum block; this determines the 3 point function coefficients uniquely in terms of the central charge. The sum over PSL(2,Z) in CFT2 has a natural AdS3 interpretation as a sum over semi-classical saddle points, which describe particles propagating along rational tangles in the bulk. We demonstrate this explicitly for the corre...
Experimental realization of a broadband illusion optics device
Li, Chao; Liu, Xiao; Li, Fang; Fang, Guangyou; Chen, Huanyang; Chan, C T
2010-01-01
We experimentally demonstrate the first metamaterial "illusion optics" device - an "invisible gateway" by using a transmission-line medium. The device contains an open channel that can block electromagnetic waves at a particular frequency range. We also demonstrate that such a device can work in a broad frequency range.
无
2011-01-01
China releases a new plan for the iron and steel industry centered on industrial upgrades The new 12th Five-Year Plan (2011-15) for China’s iron and steel industry, recently released on the website of the Ministry of Industry and Information
Dwyer, Stephen F.
2013-05-01
This test plan is a document that provides a systematic approach to the planned testing of rooftop structures to determine their actual load carrying capacity. This document identifies typical tests to be performed, the responsible parties for testing, the general feature of the tests, the testing approach, test deliverables, testing schedule, monitoring requirements, and environmental and safety compliance.
Simulation and Experimental Realization of Multi-Scroll Chaotic Oscillators
E. T. Cuautle
2013-09-01
Full Text Available This article shows the simulation and experimental realization of a multi-scroll chaotic oscillator based on saturated nonlinear function (SNLF series. First, the simulation is performed by MATLAB using the mathematical description of the oscillator. At this step, it is shown how to increase the number of scrolls by augmenting the SNLF. Second, the mathematical description is implemented with electronic devices and simulated by using the behavioral model of commercially available operational amplifiers. The circuit simulation of the multi-scroll chaotic oscillator is performed showing how to generate even and odd number of scrolls. Finally, the simulated circuit is realized experimentally and the results confirm good agreement with theoretical simulations.
Design and realization of random measurement scheme for compressed sensing
XIE Cheng-jun; XU Lin
2012-01-01
Design and realization of random measurement scheme for compressed sensing (CS) are presented in this paper,and lower limits of the measurement number are achieved when the precise reconstruction is realized.Four kinds of random measurement matrices are designed according to the constraint conditions of random measurement.The performance is tested employing the algorithm of stagewise orthogonal matching pursuit (StOMP).Results of the experiment show that lower limits of the measurement number are much better than the results described in Refs.[ 13-15].When the ratios of measurement to sparsity are 3.8 and 4.0,the mean relative errors of the reconstructed signals are 8.57 × 10-13 and 2.43 × 10-14,respectively,which confirms that the random measurement scheme of this paper is very effective.
Algebraic proof and application of Lumley's realizability triangle
Gerolymos, G A
2016-01-01
Lumley [Lumley J.L.: Adv. Appl. Mech. 18 (1978) 123--176] provided a geometrical proof that any Reynolds-stress tensor $\\overline{u_i'u_j'}$ (indeed any tensor whose eigenvalues are invariably nonnegative) should remain inside the so-called Lumley's realizability triangle. An alternative formal algebraic proof is given that the anisotropy invariants of any positive-definite symmetric Cartesian rank-2 tensor in the 3-D Euclidian space $\\mathbb{E}^3$ define a point which lies within the realizability triangle. This general result applies therefore not only to $\\overline{u_i'u_j'}$ but also to many other tensors that appear in the analysis and modeling of turbulent flows. Typical examples are presented based on DNS data for plane channel flow.
Realized Jump Risk and Equity Return in China
Guojin Chen
2014-01-01
Full Text Available We utilize the realized jump components to explore a new jump (including nonsystematic jump and systematic jump risk factor model. After estimating daily realized jumps from high-frequency transaction data of the Chinese A-share stocks, we calculate monthly jump size, monthly jump standard deviation, and monthly jump arrival rate and then use those monthly jump factors to explain the return of the following month. Our empirical results show that the jump tail risk can explain the equity return. For the large capital-size stocks, large cap stock portfolios, and index, one-month lagged jump risk factor significantly explains the asset return variation. Our results remain the same even when we add the size and value factors in the robustness tests.
Realization of a cryogenic interface to an ultracold atomic chamber
Date, Aditya; Wang, Ke; Shaffer, Airlia; Patil, Yogesh Sharad; Schwab, Keith; Vengalattore, Mukund
2016-05-01
The control and manipulation of ultracold atoms in close proximity to cryogenic material surfaces opens up novel avenues for quantum sensing with cold atoms. However, integrating cryogenics with cold atomic systems presents the dual challenges of reducing thermal radiation load while allowing optimal optical access. Here, we present the realization of a unique interface between a cryogenic system and a room-temperature ultracold atomic chamber which allows for the optical trapping of cold atoms within microns of a sub-10 K cryogenic surface. Our interface serves as a platform for a cold-atoms based precision magnetic microscope for probing exotic condensed matter systems such as correlated electronic materials, as well as a platform for the realization of hybrid quantum systems. This work is supported by the DARPA QuASAR program through a grant from the ARO.
RESEARCH OF PROBLEMS ON REALIZING DIRECT ALGORITHM OF WAVELET TRANSFORM
无
2003-01-01
Direct algorithm of wavelet transform (WT) is the numerical algorithm obtained from the integral formula of WT by directly digitization.Some problems on realizing the algorithm are studied.Some conclusions on the direct algorithm of discrete wavelet transform (DWT), such as discrete convolution operation formula of wavelet coefficients and wavelet components, sampling principle and technology to wavelets, deciding method for scale range of wavelets, measures to solve edge effect problem, etc, are obtained.The realization of direct algorithm of continuous wavelet transform (CWT) is also studied.The computing cost of direct algorithm and Mallat algorithm of DWT are still studied, and the computing formulae are obtained.These works are beneficial to deeply understand WT and Mallat algorithm.Examples in the end show that direct algorithm can also be applied widely.
Electronic realization of the fractional-order systems
Františka Dorčáková
2007-10-01
Full Text Available This article is devoted to the electronic (analogue realization of the fractional-order systems – controllers or controlled objects whose we earlier used, identified, and analyzed as a mathematical models only ��� namely a fractional-order differential equation, and solved numerically using a method based on the truncated version of the Grunwald - Letnikov formula for fractional derivative. The electronic realization of the fractional derivative is based on the continued fraction expansion of the rational approximation of the fractional differentiator from which we obtained the values of the resistors and capacitors of the electronic circuit. Along with the mathematical description are presented also simulation and measurement results.
On realization of equal election for farmers in China
CHENG Naisheng
2007-01-01
With the election rights of farmers, there exists inequality not only in practice but also in legislation. How do we view such inequality? We do not think that such inequality is entirely the result of artificiality. It depends on the historical status of farmers, especially the level of the productive forces they represent. In China, provided the majority of the residents are farmers, who are small individual farmers, it is plausible that farmers cannot acquire the equal election rights in legislation. However, we shall create conditions for actively promoting the realization of farmers' equal election rights in legislation. The day when the majority of farmers become the producers and operators of commodities will be the time when farmers in China realize their equal election rights in legislation.
A thermoelectric power generating heat exchanger: Part I - Experimental realization
Bjørk, R; Pryds, N; Lindeburg, N; Viereck, P
2016-01-01
An experimental realization of a heat exchanger with commercial thermoelectric generators (TEGs) is presented. The power producing capabilities as a function of flow rate and temperature span are characterized for two different commercial heat transfer fluids and for three different thermal interface materials. The device is shown to produce 2 W per TEG or 0.22 W cm$^{-2}$ at a fluid temperature difference of 175 $^\\circ$C and a flow rate per fluid channel of 5 L min$^{-1}$. One experimentally realized design produced 200 W in total from 100 TEGs. For the design considered here, the power production is shown to depend more critically on the fluid temperature span than on the fluid flow rate. Finally, the temperature span across the TEG is shown to be 55% to 75% of the temperature span between the hot and cold fluids.
A photospectrometer realized in a standard integrated circuit process
Simpson, M.L.; Dress, W.B.; Ericson, M.N.; Jellison, G.E.; Sitter, D.N.; Wintenberg, A.L. [Oak Ridge National Laboratory, P.O. Box 2008, MS 6006, Oak Ridge, Tennessee37831-6006 (United States); French, D.F. [Department of Electrical Engineering, Ferris Hall, University of Tennessee, Knoxville, Tennessee 37996-2100 (United States)
1998-02-01
A photospectrometer has been realized in a standard integrated circuit (IC) process. Only the masks, materials, and fabrication steps inherent to this IC process were used (i.e., no post processing to add mechanical or optical devices for filtering). The spectrometer was composed of a set of 18 photodetectors with independent spectral responses. The responses of these devices were weighted and summed to form outputs proportional to the input optical power in discrete wavelength bands in the region from {approximately}400 to {approximately}1100nm. With the solution space restricted to a 60 nm band, this instrument could resolve Gaussian input spectra ({sigma}=5nm) with a peak-to-peak spacing of less than 15 nm. This device could easily be integrated with additional analog, digital, or wireless circuits to realize a true laboratory instrument on-a-chip. {copyright} {ital 1998 American Institute of Physics.}
Modeling daily realized futures volatility with singular spectrum analysis
Thomakos, Dimitrios D.; Wang, Tao; Wille, Luc T.
2002-09-01
Using singular spectrum analysis (SSA), we model the realized volatility and logarithmic standard deviations of two important futures return series. The realized volatility and logarithmic standard deviations are constructed following the methodology of Andersen et al. [J. Am. Stat. Ass. 96 (2001) 42-55] using intra-day transaction data. We find that SSA decomposes the volatility series quite well and effectively captures both the market trend (accounting for about 34-38% of the total variance in the series) and, more importantly, a number of underlying market periodicities. Reliable identification of any periodicities is extremely important for options pricing and risk management and we believe that SSA can be a useful addition to the financial practitioners’ toolbox.
Experimental Realization of an Achromatic Magnetic Mirror based on Metamaterials
Pisano, Giampaolo; Tucker, Carole
2016-01-01
Our work relates to the use of metamaterials engineered to realize a meta-surface approaching the exotic properties of an ideal object not observed in nature, a "magnetic mirror". Previous realizations were based on resonant structures which implied narrow bandwidths and large losses. The working principle of our device is ideally frequency-independent, it does not involve resonances and it does not rely on a specific technology. The performance of our prototype, working at millimetre wavelengths, has never been achieved before and it is superior to any other device reported in the literature, both in the microwave and optical regions. The device inherently has large bandwidth (144%), low losses (<1 %) and is almost independent of incidence-angle and polarization-state and thus approaches the behaviour of an ideal magnetic mirror. Applications of magnetic mirrors range from low-profile antennas, absorbers to optoelectronic devices. Our device can be realised using different technologies to operate in other...
Hardware Realization of Chaos-based Symmetric Video Encryption
Ibrahim, Mohamad A.
2013-05-01
This thesis reports original work on hardware realization of symmetric video encryption using chaos-based continuous systems as pseudo-random number generators. The thesis also presents some of the serious degradations caused by digitally implementing chaotic systems. Subsequently, some techniques to eliminate such defects, including the ultimately adopted scheme are listed and explained in detail. Moreover, the thesis describes original work on the design of an encryption system to encrypt MPEG-2 video streams. Information about the MPEG-2 standard that fits this design context is presented. Then, the security of the proposed system is exhaustively analyzed and the performance is compared with other reported systems, showing superiority in performance and security. The thesis focuses more on the hardware and the circuit aspect of the system’s design. The system is realized on Xilinx Vetrix-4 FPGA with hardware parameters and throughput performance surpassing conventional encryption systems.
The mathematical model realization algorithm of high voltage cable
2006-01-01
At mathematical model realization algorithm is very important to know the account order of necessary relations and how it presents. Depending of loads or signal sources connection in selected points of mathematical model its very important to know as to make the equations in this point that it was possible to determine all unknown variables in this point. The number of equations which describe this point must to coincide with number of unknown variables, and matrix which describes factor...
Towards an Improved Realization of the BIH Terrestrial Frame
Boucher, Claude; Altamimi, Zuheir
In order to redefine the BIH terrestrial system from 1984 onwards (to be known as BTS), a global adjustment has been carried out using, in addition to the ERP series, sets of coordinates of sites where space geodesy stations are operated. The model used in the analysis is recalled and the calculation realized for the BIH Annual Report for 1984 is described. The future maintenance as well as improvements of the BTS are also outlined.
Operational Semantic of Workflow Engine and the Realizing Technique
FU Yan-ning; LIU Lei; ZHAO Dong-fan; JIN Long-fei
2005-01-01
At present, there is no formalized description of the executing procedure of workflow models. The procedure of workflow models executing in workflow engine is described using operational semantic. The formalized description of process instances and activity instances leads to very clear structure of the workflow engine, has easy cooperation of the heterogeneous workflow engines and guides the realization of the workflow engine function. Meanwhile, the software of workflow engine has been completed by means of the formalized description.
Realization of an Ultrasensitive Heisenberg-Limited Interferometer
2006-07-31
used a Monte Carlo simulation program to examine the effect of losses on this highly nonlinear detection scheme, with its experimental imple...is below since many authors do not follow the 200 word limit 14. SUBJECT TERMS quantum optics, nonlinear optics, squeezed states, Heisenberg -limited...Programs 1001 N. Emmett St. P.O. Box 400195 Charlottesville, VA 22904 -4195 Realization of an Ultrasensitive Heisenberg -Limited Interferometer REPORT
Estimating Net Realizable Value for Distressed Real Estate
James D. Shilling; John D. Benjamin; Sirmans, C. F.
1990-01-01
This paper provides a framework for adjusting distressed real estate properties for liquidating discounts. We estimate the probability of receiving an offer on a property in any particular short interval of time. Our empirical evidence allows us to predict the average rate at which offers will occur in any particular interval of time. Further, it allows us to arrive at an estimate of net realizable value, adjusted for selling expenses.
MOF QVT grafiskas formas realizācija
Boroviks, Dmitrijs
2009-01-01
Maģistra darbā tiek realizēts MOF QVT Relational valodas grafiskais redaktors. Darbā galvenā uzmanība tiek pievērsta QVT Relational valodas redaktora būvei izmantojot transformācijas vadīto arhitektūru. Izveidoto redaktoru turpmāk varēs izmantot MOF QVT valodas izplatīšanai.
High swing CMOS realization for third generation current conveyor (CCIII)
Minaei, Shahram; Yıldız, Merih; Türköz, Sait; Kuntman, Hakan
2003-01-01
In this paper a new CMOS realization for third generation current conveyor (CCIII) is proposed. The proposed circuit provides high swing range at terminals X and Y. The circuit has low input impedances at terminals X and Y and high output impedance at terminals Z+ and Z-. The circuit has 180MHz -3dB cutoff frequency in voltage follower mode. SPICE simulation results using MIETEC 1.2 CMOS process model are given.
Experience of Macroeconomic Models Realization in Transition Economy
Elvira Naval
2005-01-01
Full Text Available This article represents an issue about macroeconomic model realization under transition economy of Moldova Republic. Different macroeconomic model beginning with simple monetary model and growth model, and more complicated model as financial programming models, general equilibrium model, describing complex functioning of national economy and forecasting effect of various economic policies on economy development were considered. Some comparative analysis and conclusions were presented.
City marketing between a theoretical reflection and a practical realization
Jezek, Jiri
2011-01-01
The paper deals with theoretical and application problems of city marketing. It is based on a series of researches which have been worked mainly in the Czech Republic, Slovak Republic, Austria, Germany and in the Netherlands. At the same time it points out the specific conditions and sometimes also different interpretations of city marketing in the countries mentioned above. The paper also points the series of discrepancies between theoretical hypothesis and practical realization of city mark...
Universal commutative operator algebras and transfer function realizations of polynomials
Jury, Michael T
2010-01-01
To each finite-dimensional operator space $E$ is associated a commutative operator algebra $UC(E)$, so that $E$ embeds completely isometrically in $UC(E)$ and any completely contractive map from $E$ to bounded operators on Hilbert space extends uniquely to a completely contractive homomorphism out of $UC(E)$. The unit ball of $UC(E)$ is characterized by a Nevanlinna factorization and transfer function realization. Examples related to multivariable von Neumann inequalities are discussed.
MOF QVT grafiskas formas realizācija
Boroviks, Dmitrijs
2009-01-01
Maģistra darbā tiek realizēts MOF QVT Relational valodas grafiskais redaktors. Darbā galvenā uzmanība tiek pievērsta QVT Relational valodas redaktora būvei izmantojot transformācijas vadīto arhitektūru. Izveidoto redaktoru turpmāk varēs izmantot MOF QVT valodas izplatīšanai.
High-quality Crystal Filter – Design and Realization
D. M. Dujković
2013-11-01
Full Text Available Analog oscillators and filters are still very important devices in modern telecommunication and measurement equipment. Quartz crystal units are used for high-quality oscillators and filters, due to their extremely stable resonant frequency and Q-factor. In this paper the design and realization of a high-quality bandpass quartz crystal filter with a possible application to antenna circuitry is described.
A Simple Realization of the Inverse Seesaw Mechanism
Dias, A G; da Silva, P S Rodrigues; Sampieri, A
2012-01-01
Differently from the canonical seesaw mechanism, which is grounded in grand unified theories, the inverse seesaw mechanism lacks a special framework that realizes it naturally. In this work we advocate that the 3-3-1 model with right-handed neutrinos has such an appropriate framework to accommodate the inverse seesaw mechanism. We also provide an explanation for the smallness of the $\\mu$ parameter and estimate the branching ratio for the rare lepton flavor violation process $\\mu \\rightarrow e\\gamma$.
Perturbative analysis of spectral singularities and their optical realizations
Mostafazadeh, Ali; Rostamzadeh, Saber
2012-01-01
We develop a perturbative method of computing spectral singularities of a Schrodinger operator defined by a general complex potential that vanishes outside a closed interval. These can be realized as zero-width resonances in optical gain media and correspond to a lasing effect that occurs at the threshold gain. Their time-reversed copies yield coherent perfect absorption of light that is also known as antilasing. We use our general results to establish the exactness of the nth-order perturbat...
Nonlinear realizations of the W$_{3}^{(2}$) algebra
Bellucci, S; Krivonos, S; Pashnev, A I
1994-01-01
In this letter we consider the nonlinear realizations of the classical Polyakov's algebra $W_3^{(2)}$. The coset space method and the covariant reduction procedure allow us to deduce the Boussinesq equation with interchanged space and evolution coordinates. By adding one more space coordinate and introducing two copies of the $W_3^{(2)}$ algebra, the same method yields the $sl(3,R)$ Toda lattice equations.
On realizations of exterior calculus with dN = 0
Abramov, V.
1998-11-01
We study realizations of the q-exterior calculus with exterior differential d satisfying d N = 0, N > 2 on the free associative algebra with one generator and on the generalized Clifford algebras. Analogs of the notions of connection and curvature are discussed in the case of the q-exterior calculus on the generalized Clifford algebra. We show that the q-exterior calculus on the free associative algebra with one generator is related to q-calculus on the braided line.
Dynamical realization of l-conformal Galilei algebra and oscillators
Galajinsky, Anton, E-mail: galajin@mph.phtd.tpu.ru [Laboratory of Mathematical Physics, Tomsk Polytechnic University, 634050 Tomsk, Lenin Ave. 30 (Russian Federation); Masterov, Ivan, E-mail: masterov@mph.phtd.tpu.ru [Laboratory of Mathematical Physics, Tomsk Polytechnic University, 634050 Tomsk, Lenin Ave. 30 (Russian Federation)
2013-01-11
The method of nonlinear realizations is applied to the l-conformal Galilei algebra to construct a dynamical system without higher derivative terms in the equations of motion. A configuration space of the model involves coordinates, which parametrize particles in d spatial dimensions, and a conformal mode, which gives rise to an effective external field. It is shown that trajectories of the system can be mapped into those of a set of decoupled oscillators in d dimensions.
Leleur, Steen
This book presents principles and methodology for planning in a complex world. It sets out a so-called systemic approach to planning, among other things, by applying “hard” and “soft” methodologies and methods in combination. The book is written for Ph.D and graduate students in engineering......, business and other fields, and it is useful for all professionals, across a wide range of employment areas, who share an interest in renewing planning practice. Such an endeavour is seen as both important and timely, recognising that many complex planning tasks necessitate organisations – be they public...... or private – to engage in planning to prepare proactive decision-making....
Leleur, Steen
This book presents principles and methodology for planning in a complex world. It sets out a so-called systemic approach to planning, among other things, by applying “hard” and “soft” methodologies and methods in combination. The book is written for Ph.D and graduate students in engineering......, business and other fields, and it is useful for all professionals, across a wide range of employment areas, who share an interest in renewing planning practice. Such an endeavour is seen as both important and timely, recognising that many complex planning tasks necessitate organisations – be they public...... or private – to engage in planning to prepare proactive decision-making....
Leaf trajectory calculation for dynamic multileaf collimation to realize optimized fluence profiles
Dirkx, M.L.P.; Heijmen, B.J.M.; Santvoort, J.P.C. van [University Hospital Rotterdam/Daniel den Hoed Cancer Center, Groene Hilledijk 301, 3075 EA Rotterdam (Netherlands)
1998-05-01
An algorithm for the calculation of the required leaf trajectories to generate optimized intensity modulated beam profiles by means of dynamic multileaf collimation is presented. This algorithm iteratively accounts for leaf transmission and collimator scatter and fully avoids tongue-and-groove underdosage effects. Tests on a large number of intensity modulated fields show that only a limited number of iterations, generally less than 10, are necessary to minimize the differences between optimized and realized fluence profiles. To assess the accuracy of the algorithm in combination with the dose calculation algorithm of the Cadplan 3D treatment planning system, predicted absolute dose distributions for optimized fluence profiles were compared with dose distributions measured on the MM50 Racetrack Microtron and resulting from the calculated leaf trajectories. Both theoretical and clinical cases yield an agreement within 2%, or within 2 mm in regions with a high dose gradient, showing that the accuracy is adequate for clinical application. (author)
Leaf trajectory calculation for dynamic multileaf collimation to realize optimized fluence profiles
Dirkx, M. L. P.; Heijmen, B. J. M.; van Santvoort, J. P. C.
1998-05-01
An algorithm for the calculation of the required leaf trajectories to generate optimized intensity modulated beam profiles by means of dynamic multileaf collimation is presented. This algorithm iteratively accounts for leaf transmission and collimator scatter and fully avoids tongue-and-groove underdosage effects. Tests on a large number of intensity modulated fields show that only a limited number of iterations, generally less than 10, are necessary to minimize the differences between optimized and realized fluence profiles. To assess the accuracy of the algorithm in combination with the dose calculation algorithm of the Cadplan 3D treatment planning system, predicted absolute dose distributions for optimized fluence profiles were compared with dose distributions measured on the MM50 Racetrack Microtron and resulting from the calculated leaf trajectories. Both theoretical and clinical cases yield an agreement within 2%, or within 2 mm in regions with a high dose gradient, showing that the accuracy is adequate for clinical application.
Bidding for blocks and environmental control; Licitacao de blocos e o controle ambiental
Agostinho, Magila Maria [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Faculdade de Direito; Silveira Neto, Otacilio dos Santos [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Programa de Recursos Humanos da ANP em Direito do Petroleo e Gas Natural, PRH-36
2004-07-01
With the coming of the Constitutional Emend n. 9/95, the Brazilian market of oil and natural gas stopped being monopolized by PETROBRAS. Since then, the concession of blocks began to be preceded by the public tender procedure realized by ANP- National Agency of Oil. The activities of oil exploration and production are potentially damaging to environment, what brings necessary the environmental licence and the previous study of the environmental impacts caused in this activity. Considering that the environmental licence must be done after the tender process, the enterprises that bought the blocks would assume the risk of not being allowed to practice their activities because of the absence of the environmental licence. To avoid that the It's offered blocks in not viable areas for oil exploration, the ANP, responsible for the public tender must accomplish a previous environmental control, to assure to the enterprises involved the environmental viability of the blocks offered. This project will touch the question of how has been realized the previous environmental control of the blocks offered by ANP into the public tender process, detaching, the control done at the 6. Round. (author)
The electrostatic Cryogenic Storage Ring CSR - Mechanical concept and realization
von Hahn, R.; Berg, F.; Blaum, K.; Crespo Lopez-Urrutia, J. R.; Fellenberger, F.; Froese, M.; Grieser, M.; Krantz, C.; Kühnel, K.-U.; Lange, M.; Menk, S.; Laux, F.; Orlov, D. A.; Repnow, R.; Schröter, C. D.; Shornikov, A.; Sieber, T.; Ullrich, J.; Wolf, A.; Rappaport, M.; Zajfman, D.
2011-12-01
A new and technologically challenging project, the electrostatic Cryogenic Storage Ring CSR, is presently under construction at the Max-Planck-Institute for Nuclear Physics in Heidelberg. Applying liquid helium cooling, the CSR, with 35 m circumference, will provide a low temperature environment of only a few Kelvin and an extremely high vacuum of better than 10 -13 mbar. To realize these conditions the mechanical design has been completed and now the first quarter section is in the construction phase. For the onion skin structure of the cryogenic system we have at the outer shell the cryostat chambers, realized by welded rectangular stainless steel frames with aluminum plates. The next two shells are fabricated as aluminum shields kept at 80 and 40 K. The inner vacuum chambers for the experimental vacuum consist of stainless steel chambers cladded with external copper sheets connected to the LHe lines for optimized thermal equilibration and cryopumping. Additional large surface 2 K units are installed for cryogenic pumping of H 2. The mechanical concepts and the realization will be presented in detail.
Boussinesq-type equations from nonlinear realizations of $W_3$
Ivanov, E; Malik, R P
1993-01-01
We construct new coset realizations of infinite-dimensional linear $W_3^{\\infty}$ symmetry associated with Zamolodchikov's $W_3$ algebra which are different from the previously explored $sl_3$ Toda realization of $W_3^{\\infty}$. We deduce the Boussinesq and modified Boussinesq equations as constraints on the geometry of the corresponding coset manifolds.The main characteristic features of these realizations are:i. Among the coset parameters there are the space and time coordinates $x$ and $t$ which enter the Boussinesq equations, all other coset parameters are regarded as fields depending on these coordinates;ii. The spin 2 and 3 currents of $W_3$ and two spin 1 $U(1)$ Kac- Moody currents as well as two spin 0 fields related to the $W_3$currents via Miura maps, come out as the only essential parameters-fields of these cosets. The remaining coset fields are covariantly expressed through them;iii.The Miura maps get a new geometric interpretation as $W_3^{\\infty}$ covariant constraints which relate the above fie...
ABOUT FORMS OF REALIZATION OF THE FUNCTIONS OF THE STATE
Novikova A. S.
2015-11-01
Full Text Available The article is devoted to consideration of questions of functions of the state and forms of their realization, which are of very great importance in the theory of the state and practice of its functioning. It can be explained with the next moments, first, to that in functions are shown essence of the state, its social appointment. The state representing the phenomenon of social life, it is characterized by extraordinary variety of directly observable and perceived manifestations. It is defined as a variety of the tasks solved by the state in various areas of life of society, and a variety of bodies, forms, methods and means of implementation of the state activity. In this regard studying of functions serves as the prerequisite of knowledge of the main thing and defining in the state. Secondly, functions of the state define its structure, i.e. ways, regularities of the organization of elements of the state as difficult system. Research of functions of the state and forms of their realization helps to estimate its opportunities, promotes deeper understanding of the mechanism of its interaction with other structures of society in the solution of the most important political, economic, social, ecological, cultural and other tasks. The correct establishment of functions of the state and definition of forms of realization of these functions promotes stabilization of the public relations and development of society in various spheres
Hamiltonian realization of power system dynamic models and its applications
2008-01-01
Power system is a typical energy system. Because Hamiltonian approaches are closely related to the energy of the physical system, they have been widely re-searched in recent years. The realization of the Hamiltonian structure of the nonlinear dynamic system is the basis for the application of the Hamiltonian methods. However, there have been no systematically investigations on the Ham-iltonian realization for different power system dynamic models so far. This paper researches the Hamiltonian realization in power systems dynamics. Starting from the widely used power system dynamic models, the paper reveals the intrinsic Hamiltonian structure of the nonlinear power system dynamics and also proposes approaches to formulate the power system Hamiltonian structure. Furthermore, this paper shows the application of the Hamiltonian structure of the power system dynamics to design non-smooth controller considering the nonlinear ceiling effects from the real physical limits. The general procedure to design controllers via the Hamiltonian structure is also summarized in the paper. The controller design based on the Hamiltonian structure is a completely nonlinear method and there is no lin-earization during the controller design process. Thus, the nonlinear characteristics of the dynamic system are completely kept and fully utilized.
Hamiltonian realization of power system dynamic models and its applications
MA Jin; MEI ShengWei
2008-01-01
Power system is a typical energy system. Because Hamiltonian approaches are closely related to the energy of the physical system, they have been widely re-searched in recent years. The realization of the Hamiltonian structure of the nonlinear dynamic system is the basis for the application of the Hamiltonian methods. However, there have been no systematically investigations on the Ham-iltonian realization for different power system dynamic models so far. This paper researches the Hamiltonian realization in power systems dynamics. Starting from the widely used power system dynamic models, the paper reveals the intrinsic Hamiltonian structure of the nonlinear power system dynamics and also proposes approaches to formulate the power system Hamiltonian structure. Furthermore, this paper shows the application of the Hemiltonian structure of the power system dynamics to design non-smooth controller considering the nonlinear ceiling effects from the real physical limits. The general procedure to design controllers via the Hamiltonian structure is also summarized in the paper. The controller design based on the Hamiltonian structure is a completely nonlinear method and there is no lin-earization during the controller design process. Thus, the nonlinear characteristics of the dynamic system are completely kept and fully utilized.
Tunable defect mode realized by graphene-based photonic crystal
Fu, Jiahui; Chen, Wan, E-mail: dhtyyobdc@126.com; Lv, Bo
2016-04-29
In this literature, we propose an active terahertz 1D photonic crystal, which consists of silicon layers and air layers. A graphene sheet is embedded at the interface between dielectric and air. Tunable photonic band gap is realized by changing the Fermi level of graphene. Transmission Matrix Method is utilized to explain the influence of the graphene layer. We also demonstrate that a dielectric slab attached with a thin sheet made of single-negative metamaterial acts like a pure dielectric slab with a thinner thickness. A tunable blue shift of the band gap can be realized by simply applying different chemical potentials on the graphene sheet. This feature can be utilized for the design of tunable high-gain antenna array and force generator in terahertz band. - Highlights: • A novel PhC embedded with grapheme sheets is presented, tunable defect is realized. • The mechanism of the tunable defect is explained using the change of equivalent thickness. • The electromagnetic force of a slab is calculated, which indicates the structure can serve as a tunable force generator.
Construction of a new watt balance with the goal to realize the kilogram in the US
Schlamminger, Stephan; Haddad, Darine; Seifert, Frank; Chao, Leon; Newell, David; Pratt, Jon
2015-04-01
A watt balance is a mechanical device that compares mechanical power to electrical power. Since electrical power is measured using quantum physics by employing the Josephson effect and the Quantum Hall effect, electrical power can be measured as a product of a known factor, two frequencies, and the Planck constant h. Mechanical power is given by mgv , where m is the mass of a weight, g the local acceleration, and v the velocity. Hence, the watt balance provides a link between mass and Planck's constant. Currently several watt balances worldwide are employed to measure h. A redefinition of the international system of units (SI) is currently in discussion and may become reality as early as 2018. In the new SI, the numerical value of the Planck constant will be fixed and the watt balance is a means to realize the unit of mass. Researchers at NIST are preparing for a new SI and we have started in 2011 with plans to design a new watt balance capable of realizing the kilogram with relative uncertainties of a few parts in 108. Construction of the new watt balance has started in 2014. In my talk, I will show some of the latest results achieved with this apparatus.
Durrani, Matin
2007-01-01
"A funding crisis at one of the UK's leading research councils has forced the country to pull out of plans for the International Linear Collider (ILC). The science and Technology Facilities Council (STFC) says in a report published today that it does not see "a practicable path towards the realization of this facility as currently conceived on a reasonable timescale". (1 page)
Kennedy Space Center Orion Processing Team Planning for Ground Operations
Letchworth, Gary; Schlierf, Roland
2011-01-01
Topics in this presentation are: Constellation Ares I/Orion/Ground Ops Elements Orion Ground Operations Flow Orion Operations Planning Process and Toolset Overview, including: 1 Orion Concept of Operations by Phase 2 Ops Analysis Capabilities Overview 3 Operations Planning Evolution 4 Functional Flow Block Diagrams 5 Operations Timeline Development 6 Discrete Event Simulation (DES) Modeling 7 Ground Operations Planning Document Database (GOPDb) Using Operations Planning Tools for Operability Improvements includes: 1 Kaizen/Lean Events 2 Mockups 3 Human Factors Analysis
Cable Harness Assembly Planning in Virtual Environment
LIU Jianhua; NING Ruxin; BAI Shuqing; WANG Bile
2006-01-01
Based on the analysis of characteristic of cable harness planning in virtual environment, a discrete control node modeling (DCNM) method of cable harness in virtual environment and the cable harness assembly routing technique based on it are proposed. DCNM converts a cable harness into continuous flexed line segments connected by a series of section center points, and the design can realize cable harness planning through controlling those control nodes. This method of cable harness routing in the virtual environment breaks the status that virtual assembly process planning is just suitable for the rigid components at present, and impulse the virtual assembly process planning to be more practical. Relation algorithms have been verified in a self-developed system named virtual cable harness assembly planning (VCHAP) system, and this VCHAP system has been applied in assembly process planning of aerospace-related products.
Hillslope-derived blocks retard river incision
Shobe, Charles M.; Tucker, Gregory E.; Anderson, Robert S.
2016-05-01
The most common detachment-limited river incision models ignore the effects of sediment on fluvial erosion, yet steep reaches of mountain rivers often host clusters of large (>1 m) blocks. We argue that this distribution of blocks is a manifestation of an autogenic negative feedback in which fast vertical river incision steepens adjacent hillslopes, which deliver blocks to the channel. Blocks inhibit incision by shielding the bed and enhancing form drag. We explore this feedback with a 1-D channel-reach model in which block delivery by hillslopes depends on the river incision rate. Results indicate that incision-dependent block delivery can explain the block distribution in Boulder Creek, Colorado. The proposed negative feedback may significantly slow knickpoint retreat, channel adjustment, and landscape response compared to rates predicted by current theory. The influence of hillslope-derived blocks may complicate efforts to extract base level histories from river profiles.
Demographic Data - MDC_BlockGroup
NSGIC Local Govt | GIS Inventory — A polygon feature class of Miami-Dade County Census 2000 Block Groups. A census Block Group is a statistical subdivision of a census Tract consisting of a cluster of...
Demographic Data - MDC_BlockGroup
NSGIC GIS Inventory (aka Ramona) — A polygon feature class of Miami-Dade County Census 2000 Block Groups. A census Block Group is a statistical subdivision of a census Tract consisting of a cluster...
A. AL-Salhi, Yahya E.; Lu, Songfeng
2016-08-01
Quantum steganography can solve some problems that are considered inefficient in image information concealing. It researches on Quantum image information concealing to have been widely exploited in recent years. Quantum image information concealing can be categorized into quantum image digital blocking, quantum image stereography, anonymity and other branches. Least significant bit (LSB) information concealing plays vital roles in the classical world because many image information concealing algorithms are designed based on it. Firstly, based on the novel enhanced quantum representation (NEQR), image uniform blocks clustering around the concrete the least significant Qu-block (LSQB) information concealing algorithm for quantum image steganography is presented. Secondly, a clustering algorithm is proposed to optimize the concealment of important data. Finally, we used Con-Steg algorithm to conceal the clustered image blocks. Information concealing located on the Fourier domain of an image can achieve the security of image information, thus we further discuss the Fourier domain LSQu-block information concealing algorithm for quantum image based on Quantum Fourier Transforms. In our algorithms, the corresponding unitary Transformations are designed to realize the aim of concealing the secret information to the least significant Qu-block representing color of the quantum cover image. Finally, the procedures of extracting the secret information are illustrated. Quantum image LSQu-block image information concealing algorithm can be applied in many fields according to different needs.
Valliappan Alagappan
2015-09-01
Full Text Available Spatial planning education is multi-disciplinary in nature and particularly site planning needs exposure to Engineering, Architectural, Landscape, Sociological, Economic, and Infrastructural aspects. The curriculum of the spatial planning program introduces the site-planning studio (multi-level design and planning at the initial semesters without introduction of single space design and planning. Due to inadequate exposure the students find it difficult to plan and design residential layouts in the planning studio. The site-planning studio provides a good understanding of how the articulation of density can modify the built form and environment. There are considerable lacunae in the adopted approaches of site planning studios in various planning schools. The author discusses in detail the varied methodologies and approaches adopted in site planning and built environment studio programs. The two pedagogical studios methods experimented in the site-planning studio were discussed at length. One method discusses from unit level planning and designing to block and neighborhood level and other method discusses from neighborhood to block and unit level. Within these two studio pedagogical methodologies, for conduct of site planning exercises two approaches were generally adopted i.e block-based approach and Design based approach. The characteristic features, outcomes, advantages and disadvantages of each methodologies /approach offer an understanding of how site-planning studios have to be taught in the planning program. The author emphasizes the importance of a gradual progression from a single space design and planning to multi-level design and planning for enhanced comprehension of students.
A Kind of Cooperation Driven by Plan%计划驱动的合作
李颖; 陈跃新
2001-01-01
Cooperation is an important mechanism for MultiAgent systems to work effectively. To real-ize it,a distributed plan is introduced in this paper. The constrained relations between subgoals, which have AND/OR relations, can be descrbed in a plan. After negotiating, a steady community will be formed,then the goal will be finished after distributively performing a plan. This kind of cooperation has been realized in the project MasBuilder(MultiAgent Systems Builder).
Fifty years of fiscal planning and implementation in the Netherlands
Beetsma, R.; Giuliodori, M.; Walschot, M.; Wierts, P.
2010-01-01
Using real-time data from the annual budget over the period 1958-2009, we explore the planning and realization of fiscal policy in the Netherlands. Our key findings are the following. First, planned surpluses are on average unbiased, although they are overoptimistic during the first half of the samp
Succession, Development and Innovation of the Master Plan of Beijing
2006-01-01
<正> The Master Plan of Beijing (2004 - 2020),approved in January 2005 by the State Council, is an important strategic, holistic and comprehensive plan for Beijing to face the new century, to realize the stra-tegic proposition of"New Beijing, Great Olympics", and to fully push forward the harmonious and sustainable development of economy, society, population, resources and environment.
Slickenside developed in chert block
Ando, J.; Hayasaka, Y.; Nishiwaki, T.
2011-12-01
We observe the microstructures of slickenside developed in chert block mainly with a TEM, in order to clarify generation mechanism of the slickenside. This chert block occurs in the Jurassic accretionary complex in eastern Yamaguchi Prefecture, Japan. The complex, chaotic sediment, is composed of allochthonous blocks, mainly of chert, limestone, sandstone and mudstone in the argillaceous matrix. The color of the undeformed chert is pale blue to white, while the surface of slickenside is black. The stereo microscopy indicates the top surface of slickenside is covered with a transparent material, whose composition is mainly Si, measured by EPMA. The striation is well developed on the transparent-Si-material. We made thin sections, parallel and perpendicular to striation and slickenside, respectively. On the thin sections, the elongated quartz grains are oriented obliquely to the slickenside with 20-30 degree. Many fluid inclusions, which represent healed microcracks, are observed within the quartz grains. These quartz grains show strong undulose extinction and bulging-recrystallization. Apatite grains are also observed as a main constituent mineral. We made TEM foils from the above thin section by FIB. TEM observation indicates the amorphous layer with several ten nanometers in width distributes along the slickenside. (We speculate the most part of the amorphous layer are taken away during polishing of the thin section, because the strength of the amorphous layer is weak. Therefore we now make thin section again with care.) The tangled dislocations are developed within the quartz grains. They make subgrains with ca. 1 micrometer in size. These results suggest the slickenside was generated by the frictional melting of quartz grains on slip plane under very high stress condition, same as pseudotachylyte.
Tiba, C.; Fraidenraich, N.; Barbosa, E.M. de S. [Departamento de Energia Nuclear da Universidade Federal de Pernambuco, Av. Prof. Luiz Freire, 1000 - CDU, CEP 50.740-540, Recife, Pernambuco (Brazil); Candeias, A.L.B. [Departamento de Engenharia Cartografica da Universidade Federal de Pernambuco, Av. Academico Helio Ramos, s/n - CDU, Recife, Pernambuco (Brazil); de Carvalho Neto, P.B.; de Melo Filho, J.B. [Companhia Hidro Eletrica do Sao Francisco -DTG- CHESF, Recife, Pernambuco (Brazil)
2010-12-15
This work describes the development of a management and planning system on a GIS (Geographic Information System) platform destined to decision makers that is, administrators, planners or consultants in renewable energies. It was conceived to deal with the management and planning of solar systems, biomass and aeolics in rural regions of Brazil. The prototype of the GIS tool covers an area of 183, 500 km{sup 2} and is made up of three blocks: management of installed renewable systems, inclusion (planning) of new systems and updating of the data banks. The GISA SOL 1.0 (Geographic Information System Applied to Solar Energy) has a total of 80 layers of information that permit the realization of spatial analyses on management and planning of renewable sources of energy at macro-spatial (state) and local (municipality) levels. A description and the methodology used for its development and a description of the functionalities will be made here. The system was developed mainly for PV systems as a support tool for management and planning of the Energy Development Program for States and Municipalities (PRODEEM), a program for inclusion in large scale of solar photovoltaic energy in the rural environment, conducted by the Ministry of Mines and Energy of Brazil. (author)
Nonis, M; CERN. Geneva. TS Department
2008-01-01
The average life duration of infrastructure being 30 years, preventive or corrective maintenance is not enough to guarantee the perpetuity of the operation of equipment and installation in order to assure the maintain of the patrimony in a functional state. At CERN, such is the age of the civil engineering infrastructure and the relative technical equipment that urgent and appropriate consolidation programs shall be established. The big number of aged buildings and equipment entails that priorities are defined. This paper realizes a portrait of the actual situation and related problems, based on data extracted from D7i and inventories carried out by TS/FM group; at the same time it defines an interventions planning which optimizes safety aspects and maintenance costs. The timing of these interventions depends on the availability of specific resources.
1978-07-31
The GRIPS (Geothermal Resources Impact Projection Study) Commission was established by a Joint Powers Agreement between the California Counties of Lake, Mendocino, Napa, and Sonoma. The objectives of GRIPS are primarily to develop and use a cooperative environmental data collection and use system including natural, social, and economic considerations to facilitate their independent decisions and those of State and Federal agencies related to the environmental effects of geothermal development. This GRIPS Plan was prepared from a wide range of studies, workshops, and staff analyses. The plan is presented in four parts: summary and introduction; environmental data status report; planned programs; and budget. (MHR)