STS-93 Commander Collins suits up for launch

Science.gov (United States)

1999-01-01

During the third launch preparations in the Operations and Checkout Building, STS-93 Commander Eileen M. Collins waves while having her launch and entry suit checked. After Space Shuttle Columbia's July 20 and 22 launch attempts were scrubbed, the launch was again rescheduled for Friday, July 23, at 12:24 a.m. EDT. STS-93 is a five-day mission primarily to release the Chandra X-ray Observatory, which will allow scientists from around the world to study some of the most distant, powerful and dynamic objects in the universe. The STS-93 crew numbers five: Commander Collins, Pilot Jeffrey S. Ashby, and Mission Specialists Stephen A. Hawley (Ph.D.), Catherine G. Coleman (Ph.D.) and Michel Tognini of France, with the Centre National d'Etudes Spatiales (CNES). Collins is the first woman to serve as commander of a shuttle mission.

Collins fragmentation function for pions and kaons in a spectator model

Energy Technology Data Exchange (ETDEWEB)

Bacchetta, A. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Gamberg, L.P. [Penn State Univ., Berks, PA (United States). Dept. of Physics; Goldstein, G.R. [Tufts Univ., Medford, MA (United States). Dept. of Physics and Astronomy; Mukherjee, A. [Indian Institute of Technology Bombay, Mumbai (India). Physics Dept.

2007-07-15

We calculate the Collins fragmentation function in the framework of a spectator model with pseudoscalar pion-quark coupling and a Gaussian form factor at the vertex. We determine the model parameters by fitting the unpolarized fragmentation function for pions and kaons. We show that the Collins function for the pions in this model is in reasonable agreement with recent parametrizations obtained by fits of the available data. In addition, we compute for the first time the Collins function for the kaons. (orig.)

STS-93 Commander Eileen Collins suits up for launch

Science.gov (United States)

1999-01-01

For the third time, in the Operations and Checkout Building, STS- 93 Commander Eileen M. Collins tries on her helmet with her launch and entry suit. After Space Shuttle Columbia's July 20 and 22 launch attempts were scrubbed, the launch was again rescheduled for Friday, July 23, at 12:24 a.m. EDT. STS-93 is a five-day mission primarily to release the Chandra X-ray Observatory, which will allow scientists from around the world to study some of the most distant, powerful and dynamic objects in the universe. The STS-93 crew numbers five: Commander Collins, Pilot Jeffrey S. Ashby, and Mission Specialists Stephen A. Hawley (Ph.D.), Catherine G. Coleman (Ph.D.) and Michel Tognini of France, with the Centre National d'Etudes Spatiales (CNES). Collins is the first woman to serve as commander of a shuttle mission.

STS-93 Commander Collins suits up before launch

Science.gov (United States)

1999-01-01

In the Operations and Checkout Building, STS-93 Commander Eileen M. Collins gets help donning her launch and entry suit. After Space Shuttle Columbia's July 20 launch attempt was scrubbed at the T-7 second mark in the countdown, the launch was rescheduled for Thursday, July 22, at 12:28 a.m. EDT. The target landing date is July 26, 1999, at 11:24 p.m. EDT. STS-93 is a five-day mission primarily to release the Chandra X-ray Observatory, which will allow scientists from around the world to study some of the most distant, powerful and dynamic objects in the universe. The new telescope is 20 to 50 times more sensitive than any previous X- ray telescope and is expected unlock the secrets of supernovae, quasars and black holes. The STS-93 crew numbers five: Commander Collins, Pilot Jeffrey S. Ashby, and Mission Specialists Stephen A. Hawley (Ph.D.), Catherine G. Coleman (Ph.D.) and Michel Tognini of France, with the Centre National d'Etudes Spatiales (CNES). Collins is the first woman to serve as commander of a shuttle mission.

STS-93 Commander Eileen Collins waves to her family

Science.gov (United States)

1999-01-01

STS-93 Commander Eileen M. Collins waves to her family nearby, a last meeting before launch of mission STS-93 on July 20. Liftoff is scheduled for 12:36 a.m. EDT. The primary mission of STS-93 is the release of the Chandra X-ray Observatory, which will allow scientists from around the world to study some of the most distant, powerful and dynamic objects in the universe. The new telescope is 20 to 50 times more sensitive than any previous X- ray telescope and is expected to unlock the secrets of supernovae, quasars and black holes. The STS-93 crew numbers five: Commander Collins, Pilot Jeffrey S. Ashby, and Mission Specialists Steven A. Hawley (Ph.D.), Catherine G. Coleman (Ph.D.) and Michel Tognini of France, with the Centre National d'Etudes Spatiales (CNES). Collins is the first woman to serve as commander of a shuttle mission.

Humility, Will, and Level 5 Leadership: An Interview with Jim Collins

Science.gov (United States)

Brosnan, Michael

2015-01-01

Organizational expert, Jim Collins, is the author of "Good to Great" (2001) and "How the Mighty Fall" (2009) and coauthor of "Great by Choice" (2011). Collins also authored a monograph entitled, "Good to Great and the Social Sectors," and presented his findings at the 2007 NAIS Conference. Recently, Collins…

Ending a HarperCollins Boycott (February 27, 2011-August 7, 2013

Directory of Open Access Journals (Sweden)

Brett Bonfield

2013-08-01

Full Text Available On February 24, 2011, Joe Atzenberger broke the news that HarperCollins would begin distributing self-destructing ebooks through OverDrive. This was not welcome news.At the time, if public libraries wanted to lend ebooks to the communities they served, signing a contract with OverDrive was the only viable way for them to do it. The fact that OverDrive agreed to this stipulation from HarperCollins meant that libraries had no choice. Any ebooks they licensed from HarperCollins would become inoperable after 26 circulations. If libraries wished to continue to circulate these titles, they would have to pay for a license that granted them another 26 circulations.After reading Atzenberger’s post, Bobbi Newman wrote a post about HarperCollins’ self-destructing ebooks on her widely read blog, Librarian by Day. Over the next week, she updated her post, adding links to responses from OverDrive President and Chief Executive Officer, Steve Potash, as well as responses by dozens of librarians and non-librarians.One of the ideas people raised was a HarperCollins boycott. The day after Bobbi Newman’s post, my friend Gabriel Farrell and I got together and created a website to let the world know that many people were going to boycott HarperCollins until it changed its policies, and to explain why people were making this decision.

Sequestered spaces and defective doors in tales by Collins and Riddell

Directory of Open Access Journals (Sweden)

Ilse M. Bussing

2012-11-01

Full Text Available http://dx.doi.org/10.5007/2175-8026.2012n62p99   In nineteenth-century texts the Victorian home is not merely asetting for supernatural activity—it is the protagonist. This articleconsiders how architecture engendered and shaped hauntedspace within Gothic texts by focusing on a single feature—the door—whose symbolic charge has been widely discussedby critics. However, instead of focusing on psychoanalyticor feminist notions commonly attached to this element, thisarticle considers architectural manuals of the day in order to“read” spatial and cultural implications of the door in Victorianhouseholds, arguing that an excessive concern for privacy andconcealment in life translates easily into Gothic fiction, in theform of spatial anxiety and infiltration. The discussion centerson two literary texts: The Dead Secret (1857 by Wilkie Collinsand The Open Door by Charlotte Riddell (1882.

Judy Collins and First Lady Hillary Clinton await the launch of STS-93

Science.gov (United States)

1999-01-01

Singer Judy Collins (left) and First Lady Hillary Rodham Clinton await the launch of Space Shuttle mission STS-93 in the Apollo/Saturn V Facility. Liftoff is scheduled for 12:36 a.m. EDT July 20. Much attention has been generated over the launch due to Commander Eileen M. Collins, the first woman to serve as commander of a Shuttle mission. Judy Collins has honored the commander with a song, 'Beyond the Sky,' which was commissioned by NASA through the NASA Art Program.

Collins effect in single spin asymmetries of the p↑p →πX process

International Nuclear Information System (INIS)

Ma, Bo-Qiangq; Schmidt, I.; Yang Jianjun

2005-01-01

We investigate the Collins effect in single spin asymmetries (SSAs) of the p ↑ p →πX process by taking into account the transverse momentum dependence of the microscopic sub-process cross sections, with the transverse momentum in the Collins function integrated over. We find that the asymmetries due to the Collins effect can only explain the available data at best qualitatively, by using our choices of quark distributions in the quark-diquark model and a pQCD-based analysis, together with several options of the Collins function. Our results indicate the necessity to take into account contributions from other effects such as the Sivers effect or twist-3 contributions. (orig.)

Dr. Francis Collins Is New NIH Director

Science.gov (United States)

... Ph.D., a physician and geneticist, is the new Director of the National Institutes of Health (NIH), part of the U.S. Department of Health and Human Services. President Barack Obama nominated Dr. Collins, who served as Director of ...

Conformal collineations and anisotropic fluids in general relativity

International Nuclear Information System (INIS)

Duggal, K.L.; Sharma, R.

1986-01-01

Recently, Herrera et al. [L. Herrera, J. Jimenez, L. Leal, J. Ponce de Leon, M. Esculpi, and V. Galino, J. Math. Phys. 25, 3274 (1984)] studied the consequences of the existence of a one-parameter group of conformal motions for anisotropic matter. They concluded that for special conformal motions, the stiff equation of state (p = μ) is singled out in a unique way, provided the generating conformal vector field is orthogonal to the four-velocity. In this paper, the same problem is studied by using conformal collineations (which include conformal motions as subgroups). It is shown that, for a special conformal collineation, the stiff equation of state is not singled out. Non-Einstein Ricci-recurrent spaces are considered as physical models for the fluid matter

Multidisciplinary treatment approach in Treacher Collins syndrome.

Science.gov (United States)

Hylton, Joseph B; Leon-Salazar, Vladimir; Anderson, Gary C; De Felippe, Nanci L O

2012-01-01

Treacher Collins syndrome (TCS) is a common genetic disorder with high penetrance and phenotypic variability. First and second branchial arches are affected in TCS, resulting in craniofacial and intraoral anomalies such as: severe convex facial profile; mid-face hypoplasia; microtia; eyelid colobomas; mandibular retrognathism; cleft palate; dental hypoplasia; heterotopic teeth; maxillary transverse hypoplasia; anterior open bite; and Angle Class II molar relationship. A high incidence of caries is also a typical finding in TCS patients. Nonetheless, even simple dental restorative procedures can be challenging in this patient population due to other associated medical conditions, such as: congenital heart defects; decreased oropharyngeal airways; hearing loss; and anxiety toward treatment. These patients often require a multidisciplinary treatment approach, including: audiology; speech and language pathology; otorhinolaryngology; general dentistry; orthodontics; oral and maxillofacial surgery; and plastic and reconstructive surgeries to improve facial appearance. This paper's purpose was to present a current understanding of Treacher Collins syndrome etiology, phenotype, and current treatment approaches.

Between Irish National Cinema and Hollywood: Neil Jordan’s Michael Collins

Directory of Open Access Journals (Sweden)

Raita Merivirta-Chakrabarti

2007-03-01

Full Text Available When Neil Jordan’s film Michael Collins was released in 1996, it was seen by some as a Hollywood epic, by others as a great national film. I would argue that Michael Collins combines these two traditions and occupies a space between Irish national cinema and Hollywood. The subject matter, the creative talent and the locations were Irish and the film was produced by using the Irish filmmaking infrastructure and the Irish government’s support mechanisms, but it was largely financed and distributed by a Hollywood studio. Also, to make it more appealing especially globally, but probably also locally (since Hollywood is now the international standard, it makes use of Hollywood conventions, making it accessible to international audiences as well. Despite the Hollywood mode, the fact remains that Michael Collins is a national film text, and Jordan does not make too many concessions to the non-Irish audiences.

STS-93 Commander Collins waves after suiting up before launch

Science.gov (United States)

1999-01-01

During final launch preparations in the Operations and Checkout Building, STS-93 Commander Eileen M. Collins waves after donning her launch and entry suit. After Space Shuttle Columbia's July 20 launch attempt was scrubbed at the T-7 second mark in the countdown, the launch was rescheduled for Thursday, July 22, at 12:28 a.m. EDT. The target landing date is July 26, 1999, at 11:24 p.m. EDT. STS-93 is a five-day mission primarily to release the Chandra X-ray Observatory, which will allow scientists from around the world to study some of the most distant, powerful and dynamic objects in the universe. The new telescope is 20 to 50 times more sensitive than any previous X-ray telescope and is expected unlock the secrets of supernovae, quasars and black holes. The STS-93 crew numbers five: Commander Collins, Pilot Jeffrey S. Ashby, and Mission Specialists Stephen A. Hawley (Ph.D.), Catherine G. Coleman (Ph.D.) and Michel Tognini of France, with the Centre National d'Etudes Spatiales (CNES). Collins is the first woman to serve as commander of a shuttle mission.

77 FR 65025 - Trust for Professional Managers and Collins Capital Investments, LLC; Notice of Application

Science.gov (United States)

2012-10-24

... SECURITIES AND EXCHANGE COMMISSION [Investment Company Act Release No. 30235; 812-14012] Trust for Professional Managers and Collins Capital Investments, LLC; Notice of Application October 18, 2012. AGENCY...: Trust for Professional Managers (the ``Trust'') and Collins Capital Investments, LLC (the ``Advisor...

Measurement of the Collins and Sivers asymmetries on transversely polarised protons

CERN Document Server

Alekseev, M.G.; Alexandrov, Yu.; Alexeev, G.D.; Amoroso, A.; Austregesilo, A.; Badelek, B.; Balestra, F.; Ball, J.; Barth, J.; Baum, G.; Bedfer, Y.; Bernhard, J.; Bertini, R.; Bettinelli, M.; Birsa, R.; Bisplinghoff, J.; Bordalo, P.; Bradamante, F.; Bravar, A.; Bressan, A.; Brona, G.; Burtin, E.; Bussa, M.P.; Chaberny, D.; Chiosso, M.; Chung, S.U.; Cicuttin, A.; Colantoni, M.; Crespo, M.L.; Dalla Torre, S.; Das, S.; Dasgupta, S.S.; Denisov, O.Yu.; Dhara, L.; Diaz, V.; Donskov, S.V.; Doshita, N.; Duic, V.; Dunnweber, W.; Efremov, A.; El Alaoui, A.; Elia, C.; Eversheim, P.D.; Eyrich, W.; Faessler, M.; Ferrero, A.; Filin, A.; Finger, M.; Finger, M., jr.; Fischer, H.; Franco, C.; Friedrich, J.M.; Garfagnini, R.; Gautheron, F.; Gavrichtchouk, O.P.; Gazda, R.; Gerassimov, S.; Geyer, R.; Giorgi, M.; Gnesi, I.; Gobbo, B.; Goertz, S.; Grabmuller, S.; Grasso, A.; Grube, B.; Gushterski, R.; Guskov, A.; Haas, F.; von Harrach, D.; Hasegawa, T.; Heinsius, F.H.; Hermann, R.; Herrmann, F.; Hess, C.; Hinterberger, F.; Horikawa, N.; Hoppner, Ch.; d'Hose, N.; Ilgner, C.; Ishimoto, S.; Ivanov, O.; Ivanshin, Yu.; Iwata, T.; Jahn, R.; Jasinski, P.; Jegou, G.; Joosten, R.; Kabuss, E.; Kafer, W.; Kang, D.; Ketzer, B.; Khaustov, G.V.; Khokhlov, Yu.A.; Kiefer, J.; Kisselev, Yu.; Klein, F.; Klimaszewski, K.; Koblitz, S.; Koivuniemi, J.H.; Kolosov, V.N.; Komissarov, E.V.; Kondo, K.; Konigsmann, K.; Konopka, R.; Konorov, I.; Konstantinov, V.F.; Korzenev, A.; Kotzinian, A.M.; Kouznetsov, O.; Kowalik, K.; Kramer, M.; Kral, A.; Kroumchtein, Z.V.; Kuhn, R.; Kunne, F.; Kurek, K.; Lauser, L.; Le Goff, J.M.; Lednev, A.A.; Lehmann, A.; Levorato, S.; Lichtenstadt, J.; Liska, T.; Maggiora, A.; Maggiora, M.; Magnon, A.; Mallot, G.K.; Mann, A.; Marchand, C.; Martin, A.; Marzec, J.; Massmann, F.; Matsuda, T.; Meyer, W.; Michigami, T.; Mikhailov, Yu.V.; Moinester, M.A.; Mutter, A.; Nagaytsev, A.; Nagel, T.; Nassalski, J.; Negrini, T.; Nerling, F.; Neubert, S.; Neyret, D.; Nikolaenko, V.I.; Nunes, A.S.; Olshevsky, A.G.; Ostrick, M.; Padee, A.; Panknin, R.; Panzieri, D.; Parsamyan, B.; Paul, S.; Pawlukiewicz-Kaminska, B.; Perevalova, E.; Pesaro, G.; Peshekhonov, D.V.; Piragino, G.; Platchkov, S.; Pochodzalla, J.; Polak, J.; Polyakov, V.A.; Pontecorvo, G.; Pretz, J.; Quintans, C.; Rajotte, J.-F.; Ramos, S.; Rapatsky, V.; Reicherz, G.; Richter, A.; Robinet, F.; Rocco, E.; Rondio, E.; Ryabchikov, D.I.; Samoylenko, V.D.; Sandacz, A.; Santos, H.; Sapozhnikov, M.G.; Sarkar, S.; Savin, I.A.; Sbrizza, G.; Schiavon, P.; Schill, C.; Schluter, T.; Schmitt, L.; Schopferer, S.; Schroder, W.; Shevchenko, O.Yu.; Siebert, H.-W.; Silva, L.; Sinha, L.; Sissakian, A.N.; Slunecka, M.; Smirnov, G.I.; Sosio, S.; Sozzi, F.; Srnka, A.; Stolarski, M.; Sulc, M.; Sulej, R.; Takekawa, S.; Tessaro, S.; Tessarotto, F.; Teufel, A.; Tkatchev, L.G.; Uhl, S.; Uman, I.; Virius, M.; Vlassov, N.V.; Vossen, A.; Weitzel, Q.; Windmolders, R.; Wislicki, W.; Wollny, H.; Zaremba, K.; Zavertyaev, M.; Zemlyanichkina, E.; Ziembicki, M.; Zhao, J.; Zhuravlev, N.; Zvyagin, A.

2010-01-01

The Collins and Sivers asymmetries for charged hadrons produced in deeply inelastic scattering on transversely polarised protons have been extracted from the data collected in 2007 with the CERN SPS muon beam tuned at 160 GeV/c. At large values of the Bjorken x variable non-zero Collins asymmetries are observed both for positive and negative hadrons while the Sivers asymmetry for positive hadrons is slightly positive over almost all the measured x range. These results nicely support the present theoretical interpretation of these asymmetries, in terms of leading-twist quark distribution and fragmentation functions.

Collins Center Update. Volume 2, Issue 2, July-September 2000

National Research Council Canada - National Science Library

Kievit, James; Perlmutter, Jim; Griffard, B. F; Auger, John; Grindle, Charles

2000-01-01

Power Projection Wargame II, Peace Operations Conference, Logistics Futures Roundtable, Logisticians Prep for the Next ATWG, Collins Center Upgrades, Global '00, Joint Flag Officer Warfighting Course (JFOWC...

Engineering new medicine: an interview with James Collins.

Science.gov (United States)

Collins, James

2010-01-01

At first glance, the commonality among synthetic gene networks, nerve cell response times and the emergence of antibiotic resistance is obscure. Yet, when speaking with James (Jim) Collins, the relationship becomes clear: all are applications-oriented problems, and all inspire unique approaches from this unusual engineer who is empowered by his freedom to fail.

Collins and Sivers Transverse Spin Asymmetries for Pions and Kaons on Deuterons

CERN Document Server

Alekseev, M.; Alexandrov, Yu.; Alexeev, G.D.; Amoroso, A.; Arbuzov, A.; Badelek, Barbara Maria; Balestra, F.; Ball, J.; Barth, J.; Baum, Guenter; Bedfer, Y.; Bernet, Colin; Bertini, R.; Bettinelli, M.; Birsa, R.; Bisplinghoff, J.; Bordalo, P.; Bradamante, Franco; Brona, G.; Burtin, E.; Bussa, M.P.; Chapiro, A.; Chiosso, M.; Cicuttin, A.; Colantoni, M.; Crespo, M.L.; Dalla Torre, S.; Dafni, T.; Das, S.; Dasgupta, S.S.; De Masi, R.; Dedek, N.; Dhara, L.; Diaz, V.; Dinkelbach, A.M.; Donskov, S.V.; Dorofeev, V.A.; Doshita, N.; Duic, V.; Dunnweber, W.; Eversheim, P.D.; Eyrich, W.; Faessler, M.; Falaleev, V.; Ferrero, L.; Finger, M.; Finger, M., Jr.; Fischer, H.; Franco, C.; Franz, J.; Friedrich, J.M.; Garfagnini, R.; Gautheron, Fabrice; Gavrichtchouk, O.P.; Gazda, R.; Geyer, R.; Giorgi, M.; Gobbo, Benigno; Gorin, A.M.; Grabmuller, S.; Grajek, O.A.; Grasso, A.; Grube, B.; Gushterski, R.; Guskov, A.; Haas, F.; Hannappel, J.; von Harrach, D.; Hasegawa, T.; Heckmann, J.; Hedicke, S.; Heinsius, Fritz-Herbert; Hermann, R.; Hess, C.; Hinterberger, F.; von Hodenberg, M.; Horikawa, S.; d'Hose, N.; Ilgner, C.; Ioukaev, A.I.; Ishimoto, S.; Ivanov, O.; Ivanshin, Yu.; Jahn, R.; Janata, A.; Jasinski, P.; Joosten, R.; Jouravlev, N.I.; Kabuss, E.; Kang, D.; Ketzer, Bernhard; Khaustov, G.V.; Khokhlov, Yu.A.; Klein, F.; Klimaszewski, K.; Koblitz, S.; Kolosov, V.N.; Komissarov, E.V.; Kondo, K.; Konigsmann, Kay; Konstantinov, V.F.; Korentchenko, A.S.; Koutchinski, N.A.; Kral, A.; Kravchuk, N.P.; Kroumchtein, Z.V.; Kuhn, R.; Kunne, Fabienne; Kurek, Krzysztof; Ladygin, M.E.; Le Goff, Jean-Marc; Lednev, A.A.; Lehmann, A.; Levorato, S.; Lichtenstadt, J.; Liska, T.; Ludwig, I.; Maggiora, A.; Maggiora, M.; Magnon, A.; Mallot, G.K.; Mann, A.; Marchand, C.; Marroncle, J.; Martin, A.; Marzec, J.; Massmann, F.; Matsuda, T.; Meyer, W.Thomas; Mikhailov, Yu.V.; Moinester, M.A.; Nagaytsev, A.; Nagel, T.; Nahle, O.; Nassalski, J.; Neliba, S.; Nerling, F.; Neubert, S.; Neyret, D.P.; Nikolaenko, V.I.; Nikolaev, K.; Olshevsky, A.G.; Ostrick, M.; Padee, A.; Pagano, P.; Panebianco, S.; Panknin, R.; Panzieri, D.; Paul, S.; Pawlukiewicz-Kaminska, B.; Peshekhonov, D.V.; Peshekhonov, V.D.; Piragino, G.; Platchkov, Stephane; Pochodzalla, J.; Polak, J.; Polyakov, V.A.; Pretz, J.; Procureur, S.; Quintans, C.; Rajotte, J.F.; Ramos, S.; Rapatsky, V.; Reicherz, G.; Reggiani, D.; Richter, A.; Robinet, F.; Rondio, Ewa; Rozhdestvensky, A.M.; Ryabchikov, D.I.; Samoylenko, V.D.; Sandacz, A.; Sapozhnikov, M.G.; Sarkar, S.; Savin, Igor A.; Schiavon, P.; Schill, Christian; Schonmeier, P.; Schroder, W.; Shevchenko, O.Yu.; Silva, L.; Sinha, L.; Sissakian, A.N.; Slunecka, M.; Smirnov, G.I.; Sosio, S.; Sozzi, F.; Srnka, A.; Stinzing, F.; Sugonyaev, V.P.; Sulc, M.; Sulej, R.; Takabayashi, N.; Tchalishev, V.V.; Tessaro, S.; Tessarotto, F.; Teufel, A.; Tkatchev, L.G.; Venugopal, G.; Virius, M.; Vlassov, N.V.; Vossen, A.; Webb, Robert C.; Weitzel, Q.; Windmolders, R.; Wirth, S.; Wislicki, W.; Wollny, H.; Zaremba, K.; Zavertyaev, M.; Zemlyanichkina, E.; Ziegler, R.; Zvyagin, A.

2009-01-01

The measurements of the Collins and Sivers asymmetries of identified hadrons produced in deep-inelastic scattering of 160 GeV/c muons on a transversely polarised 6LiD target at COMPASS are presented. The results for charged pions and charged and neutral kaons correspond to all data available, which were collected from 2002 to 2004. For all final state particles both the Collins and Sivers asymmetries turn out to be small, compatible with zero within the statistical errors, in line with the previously published results for not identified charged hadrons, and with the expected cancellation between the u- and d-quark contributions.

STS-93 Commander Collins poses in front of Columbia

Science.gov (United States)

1999-01-01

STS-93 Commander Eileen Collins poses in front of the Space Shuttle orbiter Columbia following her textbook landing on runway 33 at the Shuttle Landing Facility. Main gear touchdown occurred at 11:20:35 p.m. EDT on July 27. On this mission, Collins became the first woman to serve as a Shuttle commander. Also on board were her fellow STS-93 crew members: Pilot Jeffrey S. Ashby and Mission Specialists Stephen A. Hawley (Ph.D.), Catherine G. Coleman (Ph.D.) and Michel Tognini of France, with the Centre National d'Etudes Spatiales (CNES). The mission's primary objective was to deploy the Chandra X-ray Observatory, which will allow scientists from around the world to study some of the most distant, powerful and dynamic objects in the universe. This was the 95th flight in the Space Shuttle program and the 26th for Columbia. The landing was the 19th consecutive Shuttle landing in Florida and the 12th night landing in Shuttle program history.

Hyperkalemia by Euro-Collins solution in anesthesia for renal transplantation: a case report.

Science.gov (United States)

Hirata, Eunice Sizue; Pereira, Rosa Inês Costa; Filho, Gentil Alves; Braga, Angélica de Fátima Assunção

2013-01-01

To describe anesthesia for renal transplantation that progressed to a sharp potassium increase after kidney reperfusion with Euro-Collins' solution in the operative field. We will also report on diagnosis and treatment used. The use of infusion solutions in the surgical field requires careful monitoring, such as electrocardiography, measurement of serum potassium, and availability of calcium gluconate, insulin, and albuterol for immediate use. The replacement of Euro-Collins' solution for saline solution immediately before the implant may be a useful option in patients with high levels of potassium.

Challenging Expertise: Paul Feyerabend vs. Harry Collins & Robert Evans on democracy, public participation and scientific authority: Paul Feyerabend vs. Harry Collins & Robert Evans on scientific authority and public participation.

Science.gov (United States)

Sorgner, Helene

2016-06-01

This paper compares Feyerabend's arguments in Science in a Free Society to the controversial theory of expertise proposed by Harry Collins and Robert Evans as a Third Wave of Science Studies. Is the legitimacy of democratic decisions threatened by the unquestioned authority of scientific advice? Or does, on the contrary, science need protection from too much democratic participation in technical decisions? Where Feyerabend's political relativism envisions democratic society as inherently pluralist and demands equal contribution of all traditions and worldviews to public decision-making, Collins and Evans hold a conception of elective modernism, defending the reality and value of technical expertise and arguing that science deserves a privileged status in modern democracies, because scientific values are also democratic values. I will argue that Feyerabend's political relativism provides a valuable framework for the evaluation of Collins' and Evans' theory of expertise. By constructing a dialog between Feyerabend and this more recent approach in Science and Technology Studies, the aim of this article is not only to show where the two positions differ and in what way they might be reconciled, but also how Feyerabend's philosophy provides substantial input to contemporary debate. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Other World in B.R. Collins' Game Runner (2011

OpenAIRE

Fateha Aziz

2016-01-01

A brief lecture for an undergrad Sci-fi class at University of Worcester, on the alternative world in B.R. Collins' Game Runner; also a work in progress on the notion of the digitised, consumer childhood in the 21st century.

Ear malformations, hearing loss and hearing rehabilitation in children with Treacher Collins syndrome.

Science.gov (United States)

Rosa, Francisco; Coutinho, Miguel Bebiano; Ferreira, João Pinto; Sousa, Cecilia Almeida

2016-01-01

The aim of this study was to assess the main ear malformations, hearing loss and auditory rehabilitation in children with Treacher Collins syndrome. We performed a retrospective study of 9 children with Treacher Collins syndrome treated in a central hospital between January 2003 and January 2013. This study showed a high incidence of malformations of the outer and middle ear, such as microtia, atresia or stenosis of the external auditory canal, hypoplastic middle ear cavity, dysmorphic or missing ossicular chain. Most patients had bilateral hearing loss of moderate or high degree. In the individuals studied, there was functional improvement in patients with bone-anchored hearing aids in relation to conventional hearing aids by bone conduction. Treacher Collins syndrome is characterized by bilateral malformations of the outer and middle ear. Hearing rehabilitation in these children is of utmost importance, and bone-anchored hearing aids is the method of choice. Copyright © 2014 Elsevier España, S.L.U. y Sociedad Española de Otorrinolaringología y Cirugía de Cabeza y Cuello. All rights reserved.

Modalidades de acción, conocimiento tácito y saber experto. La obra reciente de Harry M. Collins

Directory of Open Access Journals (Sweden)

Juan Manuel Iranzo

2013-01-01

Full Text Available La obra del sociólogo Harry Collins sostiene que existen acciones humanas imposibles de automatizar mecánicamente porque requieren habilidades interpretativas sólo obtenibles mediante socialización, único modo de interiorizar el conocimiento tácito. Collins analiza distintas variantes de éste, subrayando el conocimiento tácito socialmente compartido. En éste se basa el saber experto, entre cuyas diferentes modalidades Collins distingue aptitudes contributivas, interaccionales, evaluativas y de gestión. Desde la sociología de la producción, transmisión, mecanización e institucionalización del conocimiento experto, las aportaciones teóricas y empíricas de Collins pueden contribuir al análisis de controversias sociotécnicas en ámbitos tecnocientíficos y políticos, entre otros.

Collins and Sivers asymmetries in muonproduction of pions and kaons off transversely polarised proton

CERN Document Server

Adolph, C.; Alexeev, M G; Alexeev, G D; Amoroso, A; Andrieux, V; Anosov, V; Austregesilo, A; Badełek, B; Balestra, F; Barth, J; Baum, G; Beck, R; Bedfer, Y; Berlin, A; Bernhard, J; Bicker, K; Bieling, J; Birsa, R; Bisplinghoff, J; Bodlak, M; Boer, M; Bordalo, P; Bradamante, F; Braun, C; Bressan, A; Büchele, M; Burtin, E; Capozza, L; Chiosso, M; Chung, S U; Cicuttin, A; Crespo, M L; Curiel, Q; Dalla Torre, S; Dasgupta, S S; Dasgupta, S; Denisov, O Yu; Donskov, S V; Doshita, N; Duic, V; Dünnweber, W; Dziewiecki, M; Efremov, A; Elia, C; Eversheim, P D; Eyrich, W; Faessler, M; Ferrero, A; Filin, A; Finger, M; Finger jr , M; Fischer, H; Franco, C; du Fresne von Hohenesche, N; Friedrich, J M; Frolov, V; Gautheron, F; Gavrichtchouk, O P; Gerassimov, S; Geyer, R; Gnesi, I; Gobbo, B; Goertz, S; Gorzellik, M; Grabmüller, S; Grasso, A; Grube, B; Grussenmeyer, T; Guskov, A; Guthörl, T; Haas, F; von Harrach, D; Hahne, D; Hashimoto, R; Heinsius, F H; Herrmann, F; Hinterberger, F; Höppner, Ch; Horikawa, N; d'Hose, N; Huber, S; Ishimoto, S; Ivanov, A; Ivanshin, Yu; Iwata, T; Jahn, R; Jary, V; Jasinski, P; Jörg, P; Joosten, R; Kabuß, E; Ketzer, B; Khaustov, G V; Khokhlov, Yu A; Kisselev, Yu; Klein, F; Klimaszewski, K; Koivuniemi, J H; Kolosov, V N; Kondo, K; Königsmann, K; Konorov, I; Konstantinov, V F; Kotzinian, A M; Kouznetsov, O; Krämer, M; Kroumchtein, Z V; Kuchinski, N; Kunne, F; Kurek, K; Kurjata, R P; Lednev, A A; Lehmann, A; Levillain, M; Levorato, S; Lichtenstadt, J; Maggiora, A; Magnon, A; Makke, N; Mallot, G K; Marchand, C; Martin, A; Marzec, J; Matousek, J; Matsuda, H; Matsuda, T; Meshcheryakov, G; Meyer, W; Michigami, T; Mikhailov, Yu V; Miyachi, Y; Nagaytsev, A; Nagel, T; Nerling, F; Neubert, S; Neyret, D; Nikolaenko, V I; Novy, J; Nowak, W -D; Nunes, A S; Olshevsky, A G; Orlov, I; Ostrick, M; Panknin, R; Panzieri, D; Parsamyan, B; Paul, S; Peshekhonov, D V; Platchkov, S; Pochodzalla, J; Polyakov, V A; Pretz, J; Quaresma, M; Quintans, C; Ramos, S; Regali, C; Reicherz, G; Rocco, E; Rossiyskaya, N S; Ryabchikov, D I; Rychter, A; Samoylenko, V D; Sandacz, A; Sarkar, S; Savin, I A; Sbrizzai, G; Schiavon, P; Schill, C; Schlüter, T; Schmidt, K; Schmieden, H; Schönning, K; Schopferer, S; Schott, M; Shevchenko, O Yu; Silva, L; Sinha, L; Sirtl, S; Slunecka, M; Sosio, S; Sozzi, F; Srnka, A; Steiger, L; Stolarski, M; Sulc, M; Sulej, R; Suzuki, H; Szabelski, A; Szameitat, T; Sznajder, P; Takekawa, S; ter Wolbeek, J; Tessaro, S; Tessarotto, F; Thibaud, F; Uhl, S; Uman, I; Virius, M; Wang, L; Weisrock, T; Wilfert, M; Windmolders, R; Wollny, H; Zaremba, K; Zavertyaev, M; Zemlyanichkina, E; Ziembicki, M; Zink, A

2015-03-31

Measurements of the Collins and Sivers asymmetries for charged pions and charged and neutral kaons produced in semi-inclusive deep-inelastic scattering of high energy muons off transversely polarised protons are presented. The results were obtained using all the available COMPASS proton data, which were taken in the years 2007 and 2010. The Collins asymmetries exhibit in the valence region a non-zero signal for pions and there are hints of non-zero signal also for kaons. The Sivers asymmetries are found to be positive for positive pions and kaons and compatible with zero otherwise.

Tooth replantation after use of Euro-Collins solution or bovine milk as storage medium: a histomorphometric analysis in dogs.

Science.gov (United States)

Sottovia, André Dotto; Sottovia Filho, Dagoberto; Poi, Wilson Roberto; Panzarini, Sônia Regina; Luize, Danielle Shima; Sonoda, Celso Koogi

2010-01-01

Euro-Collins solution was developed for the preservation of organs for transplantation, whose characteristics have raised interest for its use as a storage medium for avulsed teeth before replantation. This study evaluated histologically and morphometrically the healing process of dog teeth replanted after storage in Euro-Collins solution or bovine milk. Eighty roots of 4 young adult mongrel dogs were randomly assigned to 4 groups (n = 20) and the root canals were instrumented and obturated with gutta-percha and a calcium hydroxide-based sealer. After 2 weeks, the teeth were extracted and subjected to the following protocols: GI (negative control), replantation immediately after extraction; GII (positive control), bench-drying for 2 hours before replantation; GIII and GIV, immersion in 10 mL of whole bovine milk and Euro-Collins solution at 4 degrees C, respectively, for 8 hours before replantation. The animals were sacrificed 90 days postoperatively. The pieces containing the replanted teeth were subjected to routine processing for histologic and histometric analyses under light microscopy and polarized light microscopy. Root resorption was observed in all groups. GII exhibited the greatest loss of dental structure (P < .01), and inflammatory resorption was predominant in this group. Storage in milk showed poorer results than immediate replantation and storage in Euro-Collins solution (P < .01). The teeth stored in Euro-Collins solution presented similar extension of root resorption and periodontal ligament reorganization to those of immediately replanted teeth. The findings of this study suggest that the Euro-Collins solution is an adequate storage medium for keeping avulsed teeth for up to 8 hours before replantation.

Modified-Collins cryocooler for zero-boiloff storage of cryogenic fuels in space

Science.gov (United States)

Hannon, Charles L.; Krass, Brady; Hogan, Jake; Brisson, John

2012-06-01

Future lunar and planetary explorations will require the storage of cryogenic propellants, particularly liquid oxygen (LOX) and liquid hydrogen (LH2), in low earth orbit (LEO) for periods of time ranging from days to months, and possibly longer. Without careful thermal management, significant quantities of stored liquid cryogens can be lost due to boil-off. Boil-off can be minimized by a variety of passive means including insulation, sun shades and passive radiational cooling. However, it has been shown that active cooling using space cryocoolers has the potential to result in Zero Boil-Off (ZBO) and the launch-mass savings using active cooling exceeds that of passive cooling of LOX for mission durations in LEO of less than 1 week, and for LH2 after about 2 months in LEO. Large-scale DC-flow cryogenic refrigeration systems operate at a fraction of the specific power levels required by small-scale AC-flow cryocoolers. The efficiency advantage of DC-flow cryogenic cycles motivates the current development of a cryocooler based on a modification of the Collins Cycle. The modified Collins cycle design employs piston type expanders that support high operating pressure ratios, electromagnetic valves that enable "floating pistons", and recuperative heat transfer. This paper will describe the design of a prototype Modified-Collins cryocooler for ZBO storage of cryogenic fuels in space.

Dr William Kerr ‘Bill’ Collins, Recipient of the 2010 Tobacco Science Research Conference Lifetime Achievement Award

Directory of Open Access Journals (Sweden)

Moore JM

2014-12-01

Full Text Available It is my distinct pleasure to make this presentation of the TSRC Lifetime Achievement Award to Dr Bill Collins from NC State University. Bill is well known in academic and industry circles for his contributions to Tobacco Science. Some have suggested that Bill Collins is the single person most identified with flue-cured tobacco at NC State and probably world-wide.

Radiating c metric: an example of a proper Ricci Collineation

International Nuclear Information System (INIS)

Aulestia, L.; Nunez, L.; Patino, A.; Rago, H.; Herrera, L.

1984-01-01

A generalization of the charged c metric to the nonstationary case is given. The possibility of associating the energy-momentum tensor with the electromagnetic or neutrino field is discussed. It is shown that, for a specific choice of the time-dependent parameters, the metric admits at least a two-parameter group of proper Ricci collineations

STS-114 Crew Interviews: 1. Eileen Collins 2. Wendy Lawrence

Science.gov (United States)

2005-01-01

1) STS-114 Commander Eileen Collins emphasized her love for teaching, respect for teachers, and her plan to go back to teaching again someday. Her solid background in Math and Science, focus on her interests, with great support from her family, and great training and support during her career with the Air Force gave her confidence in pursuing her dream to become an astronaut. Commander Collins shares her thoughts on the Columbia, details the various flight operations and crew tasks that will take place during the mission and the importance of Shuttle missions to the International Space Station and space exploration. 2) STS-114 Mission Specialist Wendy Lawrence first dreamed of becoming an astronaut when she watched Neil Armstrong walk on the moon from their black and white TV set. She majored in Engineering and became a Navy pilot. She shares her thoughts on the Columbia, details her major role as the crew in charge of all the transfer operations; getting the MPLM unpacked and repacked; and the importance of Shuttle missions to the International Space Station and space exploration.

Long-term surveillance plan for the Collins Ranch Disposal Site, Lakeview, Oregon

International Nuclear Information System (INIS)

1993-12-01

This long-term surveillance plan (LTSP) for the Lakeview, Oregon, Uranium Mill Tailings Remedial Action (UMTRA) Project disposal site describes the surveillance activities for the Lakeview (Collins Ranch) disposal cell, which will be referred to as the Collins Ranch disposal cell throughout this document. The US Department of Energy (DOE) will carry out these activities to ensure that the disposal cell continues to function as designed. This final LTSP was prepared as a requirement for acceptance under the US Nuclear Regulatory Commission (NRC) general license for custody and long-term care of residual radioactive materials. This LTSP documents whether the land and interests are owned by the United States or an Indian tribe, and details how the long-term care of the disposal site will be carried out. It is based on the DOE's Guidance for Implementing the UMTRA Project Long-term Surveillance Program (DOE, 1992a)

Measurement of the Collins and Sivers asymmetries on transversely polarised protons

Czech Academy of Sciences Publication Activity Database

Alekseev, M.; Alexakhin, V. Yu.; Alexandrov, Yu.; Alexeev, G. D.; Amoroso, A.; Austregisilio, A.; Badelek, B.; Balestra, F.; Ball, J.; Barth, J.; Baum, G.; Bedfer, Y.; Bernhard, J.; Bertini, R.; Bettinelli, M.; Birsa, R.; Bisplinghoff, J.; Bordalo, P.; Bradamante, F.; Bravar, A.; Bressan, A.; Brona, G.; Burtin, E.; Bussa, M.; Chaberny, D.; Chiosso, M.; Chung, S.U.; Cicuttin, A.; Colantoni, M.; Crespo, M.; Dalla Torre, S.; Das, S.; Dasgupta, S. S.; Denisov, O.; Dhara, L.; Diaz, V.; Donskov, S.; Doshita, N.; Duic, V.; Dünnweber, W.; Efremov, A.V.; El Alaoui, A.; Elia, C.; Eversheim, P.; Eyrich, W.; Faessler, M.; Ferrero, A.; Filin, A.; Finger, M.; Finger jr., M.; Fischer, H.; Franco, C.; Friedrich, J.; Garfagnini, R.; Gautheron, F.; Gavrichtchouk, O.; Gazda, R.; Gerassimov, S.; Geyer, R.; Giorgi, M.; Gnesi, I.; Gobbo, B.; Goertz, S.; Grabmüller, S.; Grasso, A.; Grube, B.; Gushterski, R.; Guskov, A.; Haas, F.; von Harrach, D.; Hasegawa, T.; Heinsius, F.; Hermann, R.; Herrmann, F.; Hess, C.; Hinterberger, F.; Horikawa, N.; Höppner, Ch.; d'Hose, N.; Ilgner, C.; Ishimoto, S.; Ivanov, O.; Ivanshin, Yu.; Iwata, T.; Jahn, R.; Jasinski, P.; Jegou, G.; Joosten, R.; Kabuss, E.; Käfer, W.; Kang, D.; Ketzer, B.; Khaustov, G.; Khokhlov, Y.; Kisselev, Y.; Klein, F.; Klimaszewski, K.; Koblitz, S.; Koivuniemi, J.; Kolosov, V.; Kondo, K.; Königsmann, K.; Konopka, R.; Konorov, I.; Konstantinov, V.; Korzenev, A.; Kotzinian, A.; Kouznetsov, O.; Kowalik, K.; Krämer, M.; Kral, A.; Kroumchtein, Z.; Kuhn, R.; Kunne, F.; Kurek, K.; Lauser, L.; Le Goff, J.; Lednev, A.; Lehmann, A.; Levorato, S.; Lichtenstadt, J.; Liska, T.; Maggiora, A.; Maggiora, M.; Magnon, A.; Mallot, G.; Mann, A.; Marchand, C.; Martin, A.; Marzec, J.; Massmann, F.; Matsuda, T.; Meyer, W.; Michigami, T.; Mikhailov, Y.; Moinester, M.; Mutter, A.; Nagaytsev, A.; Nagel, T.; Nassalski, J.; Negrini, S.; Nerling, F.; Neubert, S.; Neyret, D.; Nikolaenko, V.; Nunes, A.S.; Olshevsky, A.; Ostrick, M.; Padee, A.; Panknin, R.; Panzieri, D.; Parsamyan, B.; Paul, S.; Pawlukiewicz-Kaminska, B.; Perevalova, E.; Pesaro, G.; Peshekhonov, D.; Piragino, G.; Platchkov, S.; Pochodzalla, J.; Polak, J.; Polyakov, V.; Pontecorvo, G.; Pretz, J.; Quintans, C.; Rajotte, J.; Ramos, S.; Rapatsky, V.; Reicherz, G.; Richter, A.; Robinet, F.; Rocco, E.; Rondio, E.; Ryabchikov, D.; Samoylenko, V.; Sandacz, A.; Santos, H.; Sapozhnikov, M.; Sarkar, S.; Savin, I.; Sbrizzai, G.; Schiavon, P.; Schill, C.; Schlütter, T.; Schmitt, L.; Schopferer, S.; Schröder, W.; Shevchenko, O.; Siebert, H.; Silva, L.; Sinha, L.; Sissakian, A.; Slunecka, M.; Smirnov, G.; Sosio, S.; Sozzi, F.; Srnka, Aleš; Stolarski, M.; Sulc, M.; Sulej, R.; Takekawa, S.; Tessaro, S.; Tessarotto, F.; Teufel, A.; Tkatchev, L.; Uhl, S.; Uman, I.; Virius, M.; Vlassov, N.; Vossen, A.; Weitzel, Q.; Windmolders, R.; Wislicki, W.; Wollny, H.; Zaremba, K.; Zavertyaev, M.; Zemlyanichkina, E.; Ziembicki, M.; Zhao, J.; Zhuravlev, N.; Zvyagin, A.

2010-01-01

Roč. 692, č. 4 (2010), s. 240-246 ISSN 0370-2693 R&D Projects: GA MŠk ME 492 Institutional research plan: CEZ:AV0Z20650511 Keywords : transverse spin effects * proton * Collins asymmetry * Sivers asymmetry Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 5.255, year: 2010

16-dimensional smooth projective planes with large collineation groups

OpenAIRE

Bödi, Richard

1998-01-01

Erworben im Rahmen der Schweizer Nationallizenzen (http://www.nationallizenzen.ch) Smooth projective planes are projective planes defined on smooth manifolds (i.e. the set of points and the set of lines are smooth manifolds) such that the geometric operations of join and intersection are smooth. A systematic study of such planes and of their collineation groups can be found in previous works of the author. We prove in this paper that a 16-dimensional smooth projective plane which admits a ...

A new measurement of the Collins and Sivers asymmetries on a transversely polarised deuteron target

CERN Document Server

Ageev, E.S.; Alexandrov, Yu.; Alexeev, G.D.; Alexeev, M.; Amoroso, A.; Badelek, B.; Balestra, F.; Ball, J.; Barth, J.; Baum, G.; Becker, M.; Bedfer, Y.; Berglund, P.; Bernet, C.; Bertini, R.; Bettinelli, M.; Birsa, R.; Bisplinghoff, J.; Bordalo, P.; Bradamante, F.; Bressan, A.; Brona, G.; Burtin, E.; Bussa, M.P.; Bytchkov, V.N.; Chapiro, A.; Cicuttin, A.; Colantoni, M.; Colavita, A.A.; Costa, S.; Crespo, M.L.; dHose, N.; Dalla Torre, S.; Das, S.; Dasgupta, S.S.; De Masi, R.; Dedek, N.; Demchenko, D.; Denisov, O.Yu.; Dhara, L.; Diaz, V.; Dinkelbach, A.M.; Donskov, S.V.; Dorofeev, V.A.; Doshita, N.; Duic, V.; Dunnweber, W.; Efremov, A.; Eversheim, P.D.; Eyrich, W.; Faessler, M.; Falaleev, V.; Fauland, P.; Ferrero, A.; Ferrero, L.; Finger, M.; Jr., M.Finger; Fischer, H.; Franz, J.; Friedrich, J.M.; Frolov, V.; Fuchs, U.; Garfagnini, R.; Gautheron, F.; Gavrichtchouk, O.P.; Gerassimov, S.; Geyer, R.; Giorgi, M.; Gobbo, B.; Goertz, S.; Gorin, A.M.; Grajek, O.A.; Grasso, A.; Grube, B.; Guskov, A.; Haas, F.; Hannappel, J.; von Harrach, D.; Hasegawa, T.; Hedicke, S.; Heinsius, F.H.; Hermann, R.; He, C.; Hinterberger, F.; von Hodenberg, M.; Horikawa, N.; Horikawa, S.; Horn, I.; Ilgner, C.; Ioukaev, A.I.; Ishimoto, S.; Ivanchin, I.; Ivanov, O.; Iwata, T.; Jahn, R.; Janata, A.; Joosten, R.; Jouravlev, N.I.; Kabuss, E.; Kalinnikov, V.; Kang, D.; Ketzer, B.; Khaustov, G.V.; Khokhlov, Yu.A.; Kisselev, Yu.; Klein, F.; Klimaszewski, K.; Koblitz, S.; Koivuniemi, J.H.; Kolosov, V.N.; Komissarov, E.V.; Kondo, K.; Konigsmann, Kay; Konorov, I.; Konstantinov, V.F.; Korentchenko, A.S.; Korzenev, A.; Kotzinian, A.M.; Koutchinski, N.A.; Kouznetsov, O.; Kowalik, K.; Kramer, D.; Kravchuk, N.P.; Krivokhizhin, G.V.; Kroumchtein, Z.V.; Kubart, J.; Kuhn, R.; Kukhtin, V.; Kunne, F.; Kurek, K.; Ladygin, M.E.; Lamanna, M.; Goff, J.M.Le; Leberig, M.; Lednev, A.A.; Lehmann, A.; Lichtenstadt, J.; Liska, T.; Ludwig, I.; Maggiora, A.; Maggiora, M.; Magnon, A.; Mallot, G.K.; Marchand, C.; Marroncle, J.; Martin, A.; Marzec, J.; Masek, L.; Massmann, F.; Matsuda, T.; Matthia, D.; Maximov, A.N.; Meyer, W.; Mielech, A.; Mikhailov, Yu.V.; Moinester, M.A.; Nagel, T.; Nahle, O.; Nassalski, J.; Neliba, S.; Neyret, D.P.; Nikolaenko, V.I.; Nozdrin, A.A.; Obraztsov, V.F.; Olshevsky, A.G.; Ostrick, M.; Padee, A.; Pagano, P.; Panebianco, S.; Panzieri, D.; Paul, S.; Peshekhonov, D.V.; Peshekhonov, V.D.; Piragino, G.; Platchkov, S.; Platzer, K.; Pochodzalla, J.; Polak, J.; Polyakov, V.A.; Pontecorvo, G.; Popov, A.A.; Pretz, J.; Procureur, S.; Quintans, C.; Ramos, S.; Reicherz, G.; Richter, A.; Rondio, E.; Rozhdestvensky, A.M.; Ryabchikov, D.; Samoylenko, V.D.; Sandacz, A.; Santos, H.; Sapozhnikov, M.G.; Savin, Igor A.; Schiavon, P.; Schill, C.; Schmitt, L.; Schroeder, W.; Schoenmeier, P.; Seeharsch, D.; Seimetz, M.; Setter, D.; Shevchenko, O.Yu.; Siebert, H.-W.; Silva, L.; Sinha, L.; Sissakian, A.N.; Slunecka, M.; Smirnov, G.I.; Sozzi, F.; Srnka, A.; Stinzing, F.; Stolarski, M.; Sugonyaev, V.P.; Sulc, M.; Sulej, R.; Tchalishev, V.V.; Tessaro, S.; Tessarotto, F.; Teufel, A.; Tkatchev, L.G.; Toeda, T.; Trippel, S.; Venugopal, G.; Virius, M.; Vlassov, N.V.; Wagner, M.; Webb, R.; Weise, E.; Weitzel, Q.; Windmolders, R.; Wislicki, W.; Zanetti, A.M.; Zaremba, K.; Zavertyaev, M.; Zhao, J.; Ziegler, R.; Zvyagin, A.

2007-01-01

New high precision measurements of the Collins and Sivers asymmetries of charged hadrons produced in deep-inelastic scattering of muons on a transversely polarised 6LiD target are presented. The data were taken in 2003 and 2004 with the COMPASS spectrometer using the muon beam of the CERN SPS at 160 GeV/c. Both the Collins and Sivers asymmetries turn out to be compatible with zero, within the present statistical errors, which are more than a factor of 2 smaller than those of the published COMPASS results from the 2002 data. The final results from the 2002, 2003 and 2004 runs are compared with naive expectations and with existing model calculations

An ecological response model for the Cache la Poudre River through Fort Collins

Science.gov (United States)

Shanahan, Jennifer; Baker, Daniel; Bledsoe, Brian P.; Poff, LeRoy; Merritt, David M.; Bestgen, Kevin R.; Auble, Gregor T.; Kondratieff, Boris C.; Stokes, John; Lorie, Mark; Sanderson, John

2014-01-01

The Poudre River Ecological Response Model (ERM) is a collaborative effort initiated by the City of Fort Collins and a team of nine river scientists to provide the City with a tool to improve its understanding of the past, present, and likely future conditions of the Cache la Poudre River ecosystem. The overall ecosystem condition is described through the measurement of key ecological indicators such as shape and character of the stream channel and banks, streamside plant communities and floodplain wetlands, aquatic vegetation and insects, and fishes, both coolwater trout and warmwater native species. The 13- mile-long study area of the Poudre River flows through Fort Collins, Colorado, and is located in an ecological transition zone between the upstream, cold-water, steep-gradient system in the Front Range of the Southern Rocky Mountains and the downstream, warm-water, low-gradient reach in the Colorado high plains.

Collins and Sivers asymmetries for pions and kaons in muon-deuteron DIS

Czech Academy of Sciences Publication Activity Database

Alekseev, M.; Alexakhin, V. Yu.; Alexandrov, Yu.; Alexeev, G. D.; Amoroso, A.; Arbuzov, A.; Badelek, B.; Balestra, F.; Ball, J.; Barth, J.; Baum, G.; Bedfer, Y.; Bernet, C.; Bertini, R.; Bettinelli, M.; Birsa, R.; Bisplinghoff, J.; Bordalo, P.; Bradamante, F.; Bravar, A.; Bressan, A.; Brona, G.; Burtin, E.; Bussa, M.; Chapiro, A.; Chiosso, M.; Cicuttin, A.; Colantoni, M.; Costa, S.; Crespo, M.; Dalla Torre, S.; Dafni, T.; Das, S.; Dasgupta, S. S.; De Masi, R.; Dedek, N.; Denisov, O.; Dhara, L.; Diaz, V.; Dinkelbach, A.; Donskov, S.; Dorofeev, V.; Doshita, N.; Duic, V.; Dünnweber, W.; Efremov, A.V.; Eversheim, P.; Eyrich, W.; Faessler, M.; Falaleev, V.; Ferrero, A.; Ferrero, L.; Finger, M.; Finger jr., M.; Fischer, H.; Franco, C.; Franz, J.; Friedrich, J.; Frolov, V.; Garfagnini, R.; Gautheron, F.; Gavrichtchouk, O.; Gazda, R.; Gerassimov, S.; Geyer, R.; Giorgi, M.; Gobbo, B.; Goertz, S.; Gorin, A.; Grabmüller, S.; Grajek, O.; Grasso, A.; Grube, B.; Gushterski, R.; Guskov, A.; Haas, F.; Hannappel, J.; von Harrach, D.; Hasegawa, T.; Heckmann, J.; Hedicke, S.; Heinsius, F.; Hermann, R.; Hess, C.; Hinterberger, F.; von Hodenberg, M.; Horikawa, N.; Horikawa, S.; d'Hose, N.; Ilgner, C.; Ioukaev, A.; Ishimoto, S.; Ivanov, O.; Ivanshin, Yu.; Iwata, T.; Jahn, R.; Janata, A.; Jasinski, P.; Joosten, R.; Jouravlev, N. I.; Kabuss, E.; Kang, D.; Ketzer, B.; Khaustov, G.; Khokhlov, Y.; Kisselev, Y.; Klein, F.; Klimaszewski, K.; Koblitz, S.; Koivuniemi, J.; Kolosov, V.; Komissarov, E.; Kondo, K.; Königsmann, K.; Konorov, I.; Konstantinov, V.; Korentchenko, A.; Korzenev, A.; Kotzinian, A.; Koutchinski, N.; Kouznetsov, O.; Kral, A.; Kravchuk, N.; Kroumchtein, Z.; Kuhn, R.; Kunne, F.; Kurek, K.; Ladygin, M.; Lamanna, M.; Le Goff, J.; Lednev, A.; Lehmann, A.; Levorato, S.; Lichtenstadt, J.; Liska, T.; Ludwig, I.; Maggiora, A.; Maggiora, M.; Magnon, A.; Mallot, G.; Mann, A.; Marchand, C.; Marroncle, J.; Martin, A.; Marzec, J.; Massmann, F.; Matsuda, T.; Maximov, A.; Meyer, W.; Mielech, A.; Mikhailov, Y.; Moinester, M.; Mutter, A.; Nagaytsev, A.; Nagel, T.; Nähle, O.; Nassalski, J.; Neliba, S.; Nerling, F.; Neubert, S.; Neyret, D.; Nikolaenko, V.; Nikolaev, K.; Olshevsky, A.; Ostrick, M.; Padee, A.; Pagano, P.; Panebianco, S.; Panknin, R.; Panzieri, D.; Paul, S.; Pawlukiewicz-Kaminska, B.; Pesaro, G.; Peshekhonov, D.; Peshekhonov, V.; Piragino, G.; Platchkov, S.; Pochodzalla, J.; Polak, J.; Polyakov, V.; Pretz, J.; Procureur, S.; Quintans, C.; Rajotte, J.; Ramos, S.; Rapatsky, V.; Reicherz, G.; Reggiani, D.; Richter, A.; Robinet, F.; Rocco, E.; Rondio, E.; Rozhdestvensky, A.; Ryabchikov, D.; Samoylenko, V.; Sandacz, A.; Santos, H.; Sapozhnikov, M.; Sarkar, S.; Savin, I.; Sbrizzai, G.; Schiavon, P.; Schill, C.; Schmitt, L.; Schönmeier, P.; Schröder, W.; Shevchenko, O.; Siebert, H.; Silva, L.; Sinha, L.; Sissakian, A.; Slunecka, M.; Smirnov, G.; Sosio, S.; Sozzi, F.; Srnka, Aleš; Stinzing, F.; Stolarski, M.; Sugonyaev, V.; Sulc, M.; Sulej, R.; Tchalishev, V.; Tessaro, S.; Tessarotto, F.; Teufel, A.; Tkatchev, L.; Venugopal, G.; Virius, M.; Vlassov, N.; Vossen, A.; Webb, R.; Weise, E.; Weitzel, Q.; Windmolders, R.; Wirth, S.; Wislicki, W.; Wollny, H.; Zaremba, K.; Zavertyaev, M.; Zemlyanichkina, E.; Zhao, J.; Ziegler, R.; Zvyagin, A.

2009-01-01

Roč. 673, č. 2 (2009), s. 127-135 ISSN 0370-2693 R&D Projects: GA MŠk ME 492 Institutional research plan: CEZ:AV0Z20650511 Keywords : deuteron * transverse single-spin asymmetry * identified hadrons * Collins asymmetry * Sivers asymmetry Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 5.083, year: 2009

Approximate Noether symmetries and collineations for regular perturbative Lagrangians

Science.gov (United States)

Paliathanasis, Andronikos; Jamal, Sameerah

2018-01-01

Regular perturbative Lagrangians that admit approximate Noether symmetries and approximate conservation laws are studied. Specifically, we investigate the connection between approximate Noether symmetries and collineations of the underlying manifold. In particular we determine the generic Noether symmetry conditions for the approximate point symmetries and we find that for a class of perturbed Lagrangians, Noether symmetries are related to the elements of the Homothetic algebra of the metric which is defined by the unperturbed Lagrangian. Moreover, we discuss how exact symmetries become approximate symmetries. Finally, some applications are presented.

Any realistic theory must be computationally realistic: a response to N. Gisin's definition of a Realistic Physics Theory

OpenAIRE

Bolotin, Arkady

2014-01-01

It is argued that the recent definition of a realistic physics theory by N. Gisin cannot be considered comprehensive unless it is supplemented with requirement that any realistic theory must be computationally realistic as well.

Interaction Between Syndromic and Non-Syndromic Factors Affecting Speech and Language Development in Treacher-Collins Syndrome

Directory of Open Access Journals (Sweden)

Marziyeh Poorjavad

2011-09-01

Full Text Available Background: Treacher-Collins syndrome is a congenital craniofacial disorder with multiple anomalies. This syndrome affects the maxilla, mandible, eyes, middle and outer ears, and soft palate. Conductive hearing loss due to the deformities of the middle and external ears is prevalent. The characteristics of this syndrome include multiple and serious threats to normal communication development in children. In this study, speech and language features of a Persian speaking child with this syndrome are presented.Case: The case was an 8-year old girl with Treacher-Collins syndrome and bilateral moderate conductive hearing loss due to atretic canal. In language and speech assessments, moderate hypernasality, numerous compensatory errors and morphosyntactic deficits were observed. There were 13 phonemes that were incorrectly produced at least in one position. Besides, she used 22 types of phonological processes that were abnormal and disappear before the age of three in normal Persian speaking children.Conclusion: Moderate hearing loss, velopharyngeal incompetency, malocclusion and dental anomalies, attention deficit/hyperactivity disorder (ADHD and environmental factors resulted in severe speech and language disorders in this case. These disorders affected her academic performance as well. Moderate hypernasality, numerous compensatory errors, and excessive and abnormal use of phonological processes were not presented as prevalent characteristics of Treacher-Collins syndrome in other resources.

Fort Collins Science Center Ecosystem Dynamics Branch

Science.gov (United States)

Wilson, Jim; Melcher, C.; Bowen, Z.

2009-01-01

Complex natural resource issues require understanding a web of interactions among ecosystem components that are (1) interdisciplinary, encompassing physical, chemical, and biological processes; (2) spatially complex, involving movements of animals, water, and airborne materials across a range of landscapes and jurisdictions; and (3) temporally complex, occurring over days, weeks, or years, sometimes involving response lags to alteration or exhibiting large natural variation. Scientists in the Ecosystem Dynamics Branch of the U.S. Geological Survey, Fort Collins Science Center, investigate a diversity of these complex natural resource questions at the landscape and systems levels. This Fact Sheet describes the work of the Ecosystems Dynamics Branch, which is focused on energy and land use, climate change and long-term integrated assessments, herbivore-ecosystem interactions, fire and post-fire restoration, and environmental flows and river restoration.

Contribution à l’étude geologique des Collines de Monferrato (Italie)

NARCIS (Netherlands)

Heide, van der S.

1942-01-01

L’histoire géologique de Monferrato est marquée par une série de transgressions et de régressions de la mer, qui se manifestent généralement d’une manière très distincte dans la partie orientale de ces collines. Nous avons résumé cette histoire schématiquement dans la fig. 3 1). Dans les règles qui

Maximal violation of the Collins-Gisin-Linden-Massar-Popescu inequality for infinite dimensional states

NARCIS (Netherlands)

Zohren, S.; Gill, R.D.

2008-01-01

We present a much simplified version of the Collins-Gisin-Linden-Massar-Popescu inequality for the 2×2×d Bell scenario. Numerical maximization of the violation of this inequality over all states and measurements suggests that the optimal state is far from maximally entangled, while the best

Homothetic matter collineations of LRS Bianchi type I spacetimes

Science.gov (United States)

Hussain, Tahir; Rahim, Waqas

2017-12-01

A complete classification of locally rotationally symmetric (LRS) Bianchi type I spacetimes via homothetic matter collineations (HMCs) is presented. For non-degenerate energy-momentum tensor, a general form of the vector field generating HMCs is found, subject to some integrability conditions. Solving the integrability conditions in different cases, it is found that the LRS Bianchi type I spacetimes admit 6-, 7-, 8-, 10- or 11-dimensional Lie algebra of HMCs. When the energy-momentum tensor is degenerate, two cases give 6 and 11 HMCs, while the remaining cases produce infinite number of HMCs. Some LRS Bianchi type I metrics are provided admitting HMCs.

Translation of proper names in the novel «Hunger games» by S. Collins

Directory of Open Access Journals (Sweden)

Zalesova N. M.

2016-05-01

Full Text Available the aim of the article is to study the methods used when translating proper names in the fantasy novel «Hunger games» by S. Collins. It was found out that the most popular ones are transcription, translation with the use of the traditional variant and semantic translation.

The Collin dynamometer: History of the development of an instrument for measuring physical and mental strength

Czech Academy of Sciences Publication Activity Database

Nicolas, S.; Vobořil, Dalibor

2017-01-01

Roč. 117, č. 2 (2017), s. 173-219 ISSN 0003-5033 Institutional support: RVO:68081740 Keywords : Collin dynamometer * experimental psychology * history of psychology Subject RIV: AN - Psychology OBOR OECD: Psychology (including human - machine relations) Impact factor: 0.358, year: 2016

Evolution of a child with Treacher Collins syndrome undergoing physiotherapeutic treatment

Directory of Open Access Journals (Sweden)

Bárbara Gabriela da S. Rodrigues

Full Text Available AbstractIntroduction Treacher Collins syndrome, or mandibulofacial dysostosis, is a hereditary disorder and is manifested by craniofacial malformations. The incidence is close to one case per 40,000 live births, without relation to gender or race. The infant carrier may present neurological development. This rare syndrome requires documentation of its main clinical and kinetic-functional consequences.Objectives The purpose of this study was to describe the clinical and kinetic-functional findings for a child who has Treacher Collins syndrome and receives treatment in the Physiotherapy Department at the Pestalozzi Association in Goiania, and to present the evolution of motor function and psychomotor development during rehabilitation.Materials and methods The information was obtained through interviews with the mother, and evaluation of the child at nine and eleven months old, using the infant neurological assessment sheet, Inventory Operational Portage (IPO and Gross Motor Function Measure (GMFM.Results The GMFM showed that the child had a higher trend in the items for lying and rolling, sitting, crawling and kneeling and minor changes in the items for standing, walking, running and jumping. In the IPO, the child progressed in all of the assessed areas: infant stimulation, motor development, socialization, self-care, cognition and language.Conclusion The child showed progress in psychomotor development in accordance with that expected for their age and initial assessment. It is suggested that children with this syndrome be treated by multidisciplinary teams in the first years of life, preventing delays and deviations in development.

Hiperpotassemia pela solução Euro-Collins na anestesia para transplante renal: relato de caso

Directory of Open Access Journals (Sweden)

Eunice Sizue Hirata

2013-10-01

Full Text Available OBJETIVOS: Descrever uma anestesia para transplante renal que se complicou com a elevação brusca de potássio, pela reperfusão do rim com solução Euro-Collins no campo operatório. Também será relatado o diagnóstico e o tratamento empregados nessa complicação. CONCLUSÃO: O uso de soluções de perfusão no campo cirúrgico requer cuidados na monitoração, como eletrocardioscopia e dosagem de potássio sérico, e disponibilidade para uso imediato de gluconato de cálcio, insulina e salbutamol. A substituição da solução Euro-Collins por soro fisiológico imediatamente antes do implante pode ser uma opção útil em pacientes com níveis de potássio sabidamente elevados.

A new measurement of the Collins and Sivers asymmetries on a transversely polarised deuteron target

Czech Academy of Sciences Publication Activity Database

Ageev, E.; Alexakhin, V.; Alexandrov, Y.; Alexeev, G.; Amoroso, A.; Badelek, B.; Balestra, F.; Ball, J.; Baum, G.; Bedfer, Y.; Berglund, P.; Bernet, C.; Bertini, R.; Birsa, R.; Bisplinghoff, J.; Bordalo, P.; Bradamante, F.; Bravar, A.; Bressan, A.; Burtin, E.; Bussa, M.; Bytchkov, V.; Cerini, L.; Chapiro, A.; Cicuttin, A.; Colantoni, M.; Colavita, A.; Costa, S.; Crespo, M.; d'Hose, N.; Dalla Torre, S.; Dasgupta, S. S.; De Masi, R.; Dedek, N.; Denisov, O.; Dhara, L.; Diaz Kavka, V.; Dinkelbach, A.; Dolgopolov, A.; Donskov, S.; Dorofeev, V.; Doshita, N.; Duic, V.; Dünnweber, W.; Ehlers, J.; Eversheim, P.; Eyrich, W.; Fabro, M.; Faessler, M.; Falaleev, V.; Fauland, P.; Ferrero, A.; Ferrero, L.; Finger, M.; Finger jr., M.; Fischer, H.; Franz, J.; Friedrich, J.; Frolov, V.; Fuchs, U.; Garfagnini, R.; Gautheron, F.; Gavrichtchouk, O.; Gerassimov, S.; Geyer, R.; Giorgi, M.; Gobbo, B.; Goertz, S.; Gorin, A.; Grajek, O.; Grasso, A.; Grube, B.; Grünemaier, A.; Hannappel, J.; von Harrach, D.; Hasegawa, T.; Hedicke, S.; Heinsius, F.; Hermann, R.; Hess, C.; Hinterberger, F.; von Hodenberg, M.; Horikawa, N.; Horikawa, S.; Ijaduola, R.; Ilgner, C.; Ioukaev, A.; Ishimoto, S.; Ivanov, O.; Iwata, T.; Jahn, R.; Janata, A.; Joosten, R.; Jouravlev, N. I.; Kabuss, E.; Kalinnikov, V.; Kang, D.; Karstens, F.; Kastaun, W.; Ketzer, B.; Khaustov, G.; Khokhlov, Y.; Khomutov, N.; Kisselev, Y.; Klein, F.; Koblitz, S.; Koivuniemi, J.; Kolosov, V.; Komissarov, E.; Kondo, K.; Königsmann, K.; Konoplyannikov, A.; Konorov, I.; Konstantinov, V.; Korentchenko, A.; Korzenev, A.; Kotzinian, A.; Koutchinski, N.; Kowalik, K.; Kravchuk, N.; Krivokhizhin, G.; Kroumchtein, Z.; Kuhn, R.; Kunne, F.; Kurek, K.; Ladygin, M.; Lamanna, M.; Le Goff, J.; Leberig, M.; Lichtenstadt, J.; Liska, T.; Ludwig, I.; Maggiora, A.; Maggiora, M.; Magnon, A.; Mallot, G.; Manuilov, I.; Marchand, C.; Marroncle, J.; Martin, A.; Marzec, J.; Matsuda, T.; Maximov, A.; Medved, K.; Meyer, W.; Mielech, A.; Mikhailov, Y.; Moinester, M.; Nähle, O.; Nassalski, J.; Neliba, S.; Neyret, D.; Nikolaenko, V.; Nozdrin, A.; Obraztsov, V.; Olshevsky, A.; Ostrick, M.; Padee, A.; Pagano, P.; Panebianco, S.; Panzieri, D.; Paul, S.; Pereira, H.; Peshekhonov, D.; Peshekhonov, V.; Piragino, G.; Platchkov, S.; Platzer, K.; Pochodzalla, J.; Polyakov, V.; Popov, A.; Pretz, J.; Quintans, C.; Ramos, S.; Rebourgeard, P.; Reicherz, G.; Reymann, J.; Rith, K.; Rozhdestvensky, A.; Rondio, E.; Sadovski, A.; Saller, E.; Samoylenko, V.; Sandacz, A.; Sans, M.; Sapozhnikov, M.; Savin, I.; Schiavon, P.; Schill, C.; Schmidt, T.; Schmitt, H.; Schmitt, L.; Shevchenko, O.; Shishkin, A.; Siebert, H.; Sinha, L.; Sissakian, A.; Skachkova, A.; Slunecka, M.; Smirnov, G.; Sozzi, F.; Sugonyaev, V.; Srnka, Aleš; Stinzing, F.; Stolarski, M.; Sulc, M.; Sulej, R.; Takabayashi, N.; Tchalishev, V.; Tassarotto, F.; Teufel, A.; Thers, D.; Tkatchev, L.; Toeda, T.; Tretyak, V.; Trousov, S.; Varanda, M.; Virius, M.; Vlassov, N.; Wagner, M.; Webb, R.; Weise, E.; Weitzel, Q.; Wiedner, U.; Wiesmann, M.; Windmolders, R.; Wirth, S.; Wislicki, W.; Zanetti, A.; Zaremba, K.; Zhao, J.; Ziegler, R.; Zvyagin, A.

2007-01-01

Roč. 765, 1-2 (2007), s. 31-70 ISSN 0550-3213 R&D Projects: GA MŠk(CZ) ME 492 Institutional research plan: CEZ:AV0Z20650511 Keywords : transversity * deuteron * Collins asymmetry * Sivers asymmetry Subject RIV: BF - Elementary Particles and High Energy Physics Impact factor: 4.645, year: 2007

The Collin dynamometer: History of the development of an instrument for measuring physical and mental strength

Czech Academy of Sciences Publication Activity Database

Nicolas, S.; Vobořil, Dalibor

2017-01-01

Roč. 117, č. 2 (2017), s. 173-219 ISSN 0003-5033 Institutional support: RVO:68081740 Keywords : Collin dynamometer * experimental psycho logy * history of psycho logy Subject RIV: AN - Psycho logy OBOR OECD: Psycho logy (including human - machine relations) Impact factor: 0.358, year: 2016

Role of expanders in helium liquefaction cycles: Parametric studies using Collins cycle

International Nuclear Information System (INIS)

Thomas, Rijo Jacob; Ghosh, Parthasarathi; Chowdhury, Kanchan

2011-01-01

Large scale helium liquefaction/refrigeration plant is a key subsystem of fusion devices. Performance of these plants is dependent on a number of geometric and operating parameters of its constituting components such as compressors, heat exchangers, expanders, valves, etc. Expander has been chosen as the subject matter of analyses in the present study. As the sensible cold of helium vapor is lost in liquefiers, the expanders in liquefaction cycles have to provide more refrigeration than those in refrigeration cycles. The expander parameters such as rate of mass flow, operating pressure, inlet temperature, etc. are inter-dependent, and hence, it is difficult to predict the system behavior with variation of a particular parameter. This necessitates the use of process simulators. Parametric studies have been performed on Collins helium liquefaction cycle using Aspen HYSYS. Collins cycle has all the basic characteristics of a large-scale helium liquefier and the results of this study may be extrapolated to understand the behavior of large scale helium liquefiers. The study shows that the maximum liquid production is obtained when 80% of the compressor flow is diverted through the expanders and it is equally distributed between the two expanders. The relationships between the liquid production and the isentropic efficiency of expanders are almost linear and both the higher and lower temperature expanders exhibit similar trends.

Role of expanders in helium liquefaction cycles: Parametric studies using Collins cycle

Energy Technology Data Exchange (ETDEWEB)

Thomas, Rijo Jacob, E-mail: rijojthomas@gmail.com [Cryogenic Engineering Centre, Indian Institute of Technology, Kharagpur, West Bengal 721302 (India); Ghosh, Parthasarathi; Chowdhury, Kanchan [Cryogenic Engineering Centre, Indian Institute of Technology, Kharagpur, West Bengal 721302 (India)

2011-06-15

Large scale helium liquefaction/refrigeration plant is a key subsystem of fusion devices. Performance of these plants is dependent on a number of geometric and operating parameters of its constituting components such as compressors, heat exchangers, expanders, valves, etc. Expander has been chosen as the subject matter of analyses in the present study. As the sensible cold of helium vapor is lost in liquefiers, the expanders in liquefaction cycles have to provide more refrigeration than those in refrigeration cycles. The expander parameters such as rate of mass flow, operating pressure, inlet temperature, etc. are inter-dependent, and hence, it is difficult to predict the system behavior with variation of a particular parameter. This necessitates the use of process simulators. Parametric studies have been performed on Collins helium liquefaction cycle using Aspen HYSYS. Collins cycle has all the basic characteristics of a large-scale helium liquefier and the results of this study may be extrapolated to understand the behavior of large scale helium liquefiers. The study shows that the maximum liquid production is obtained when 80% of the compressor flow is diverted through the expanders and it is equally distributed between the two expanders. The relationships between the liquid production and the isentropic efficiency of expanders are almost linear and both the higher and lower temperature expanders exhibit similar trends.

Seasonal shifts in the diet of the big brown bat (Eptesicus fuscus), Fort Collins, Colorado

Science.gov (United States)

Valdez, Ernest W.; O'Shea, Thomas J.

2014-01-01

Recent analyses suggest that the big brown bat (Eptesicus fuscus) may be less of a beetle specialist (Coleoptera) in the western United States than previously thought, and that its diet might also vary with temperature. We tested the hypothesis that big brown bats might opportunistically prey on moths by analyzing insect fragments in guano pellets from 30 individual bats (27 females and 3 males) captured while foraging in Fort Collins, Colorado, during May, late July–early August, and late September 2002. We found that bats sampled 17–20 May (n = 12 bats) had a high (81–83%) percentage of volume of lepidopterans in guano, with the remainder (17–19% volume) dipterans and no coleopterans. From 28 May–9 August (n = 17 bats) coleopterans dominated (74–98% volume). On 20 September (n = 1 bat) lepidopterans were 99% of volume in guano. Migratory miller moths (Euxoa auxiliaris) were unusually abundant in Fort Collins in spring and autumn of 2002 and are known agricultural pests as larvae (army cutworms), suggesting that seasonal dietary flexibility in big brown bats has economic benefits.

Conformal Collineations of the Ricci and Energy-Momentum Tensors in Static Plane Symmetric Space-Times

Science.gov (United States)

Akhtar, S. S.; Hussain, T.; Bokhari, A. H.; Khan, F.

2018-04-01

We provide a complete classification of static plane symmetric space-times according to conformal Ricci collineations (CRCs) and conformal matter collineations (CMCs) in both the degenerate and nondegenerate cases. In the case of a nondegenerate Ricci tensor, we find a general form of the vector field generating CRCs in terms of unknown functions of t and x subject to some integrability conditions. We then solve the integrability conditions in different cases depending upon the nature of the Ricci tensor and conclude that the static plane symmetric space-times have a 7-, 10- or 15-dimensional Lie algebra of CRCs. Moreover, we find that these space-times admit an infinite number of CRCs if the Ricci tensor is degenerate. We use a similar procedure to study CMCs in the case of a degenerate or nondegenerate matter tensor. We obtain the exact form of some static plane symmetric space-time metrics that admit nontrivial CRCs and CMCs. Finally, we present some physical applications of our obtained results by considering a perfect fluid as a source of the energy-momentum tensor.

Research, Development and Demonstration of Peak Load Reduction on Distribution Feeders Using Distributed Energy Resources for the City of Fort Collins

Energy Technology Data Exchange (ETDEWEB)

Sumner, Dennis [City of Fort Collins Utilities, CO (United States); Vosburg, Tom [City of Fort Collins Utilities, CO (United States); Brunner, Steve [Brendle Group, Fort Collins, CO (United States); Gates, Judy [Woodward, Inc., Fort Collins, CO (United States); Howard, Nathan [Spirae, Inc., Fort Collins, CO (United States); Merton, Andrew [Spirae, Inc., Fort Collins, CO (United States); Wright, Don [Spirae, Inc., Fort Collins, CO (United States); Birlingmair, Doug [Spirae, Inc., Fort Collins, CO (United States)

2015-10-01

This project titled “Research, Development and Demonstration of Peak Load Reduction on Distribution Feeders Using Distributed Energy Resources for the City of Fort Collins” evolved in response to the Department of Energy’s (DOE) Funding Opportunity Announcement (FOA) Number DE-PS26-07NT43119. Also referred to as the Fort Collins Renewable and Distributed System Integration (RDSI) Project, the effort was undertaken by a diverse group of local government, higher education and business organizations; and was driven by three overarching goals: I. Fulfill the requirements of the DOE FOA’s Area of Interest 2: Renewable and Distributed System Integration; most notably, to demonstrate the ability to reduce electric system distribution feeder peak load by 15% or more through the coordinated use of Distributed Energy Resources (DER). II. Advance the expertise, technologies and infrastructure necessary to support the long term vision of the Fort Collins Zero Energy District (FortZED) and move towards creating a zero energy district in the Fort Collins “Old Town” area. III. Further the goals of the City of Fort Collins Energy Policy, including the development of a Smart Grid-enabled distribution system in Fort Collins, expanded use of renewable energy, increased energy conservation, and peak load reduction. Through the collaborative efforts of the partner organizations, the Fort Collins RDSI project was successful in achieving all three of these goals. This report is organized into two distinct sections corresponding to the two phases of the project: • Part 1: Feeder Peak Load Reduction and the FortZED Initiative. • Part 2: Forming and Operating Utility Microgrids and Managing Load and Production Variability The original project scope addressed the Part 1 feeder peak load reduction. That work took place from 2009 through 2011 and was largely complete when the project scope was amended to include a demonstration of microgrid operations. While leveraging the

Pediatric Clival Chordoma: A Curable Disease that Conforms to Collins' Law.

Science.gov (United States)

Rassi, Marcio S; Hulou, M Maher; Almefty, Kaith; Bi, Wenya Linda; Pravdenkova, Svetlana; Dunn, Ian F; Smith, Timothy R; Al-Mefty, Ossama

2018-05-01

Skull base chordomas in children are extremely rare. Their course, management, and outcome have not been defined. To describe the preeminent clinical and radiological features in a series of pediatric patients with skull base chordomas and analyze the outcome of a cohort who underwent uniform treatment. We emphasize predictors of overall survival and progression-free survival, which aligns with Collins' law for embryonal tumors. Thirty-one patients with a mean age of 10.7 yr (range 0.8-22) harboring skull base chordomas were evaluated. We retrospectively analyzed the outcomes and prognostic factors for 18 patients treated by the senior author, with uniform management of surgery with the aim of gross total resection and adjuvant proton-beam radiotherapy. Mean follow-up was 119.2 mo (range 8-263). Abducens nerve palsy was the most common presenting symptom. Imaging disclosed large tumors that often involve multiple anatomical compartments. Patients undergoing gross total resection had significantly increased progression-free survival (P = .02) and overall survival (P = .05) compared with those having subtotal resection. Those who lived through the period of risk for recurrence without disease progression had a higher probability of living entirely free of progression (P = .03; odds ratio = 16.0). Age, sex, and histopathological variant did not yield statistical significance in survival. Long-term overall and progression-free survival in children harboring skull base chordomas can be achieved with gross surgical resection and proton-beam radiotherapy, despite an advanced stage at presentation. Collins' law does apply to pediatric skull base chordomas, and children with this disease have a high hope for cure.

Single spin asymmetry in inclusive pion production, Collins effect and the string model

International Nuclear Information System (INIS)

Artru, X.; Czyzewski, J.; Yabuki, H.

1994-05-01

We calculate the single spin asymmetry in the inclusive pion production in proton-proton collisions. We generate the asymmetry at the level of fragmentation function (Collins effect) by the Lund coloured string mechanism. We compare our results with the Fermilab E704 data from p ↑p collisions at 200 GeV. We show that the transversely polarized quark densities at high Bjorken x strongly differ from these predicted by the SU(6) proton wave function. (authors). 18 refs., 7 figs

Summary and abstracts from Sudden Aspen Decline (SAD) Meeting; Fort Collins, Colorado, February 12-13, 2008

Science.gov (United States)

Paul C. Rogers

2008-01-01

In recent years the aspen research and management community has witnessed increasing accounts of unexplained aspen die-offs across the Rocky Mountain region. In response, two meetings were held to address the issue; this paper summarizes the most recent gathering, a symposium held in Fort Collins at the USDA Forest Service, Rocky Mountain Research Station, on February...

Quantification of pneumothorax volume on chest radiographs: comparison between the collins' and the axel's methods with three-dimensional CT as the standard of reference

International Nuclear Information System (INIS)

Lee, Chang Keun; Kim, Hyung Jin; Lee, Kyung Hee; Kim, Joung Taek; Kim, Kwang Ho; Suh, Chang Hae; Han, Heon

1999-01-01

The purpose of this study was twofold. In a preliminary study, we evaluated the accuracy of 3-D (three-dimensional) CT for the estimation of pneumothorax volume and for providing the optimal postprocessing method for clinical study. In the clinical study, we determined which of the two methods, Collins' and Axel's, was more accurate for the estimation of pneumothorax volume, as seen on chest radiographs, using 3-D CT as the standard of reference. In the preliminary study, 3-D CT was applied to phantoms and to four patients with pneumothorax using two different postprocessing methods, manual contour delineation and thresholding. In the clinical study, 3-D CT was performed in 13 patients with pneumothorax. For the purpose of evaluating conventional radiographs, a localizer scan was used for comparing the accuracy of Collins' method with that of Axel's method, with 3-D CT as the standard of reference. The preliminary study revealed that 3-D CT estimated pneumothorax volume with great accuracy and that manual contour delineation and thresholding measured volume equally well. Because of the shorter postprocessing time required with thresholding than with manual contour delineation (5 min versus 30 min), the former was used during clinical study. The results of this indicated close correlation between the measurements obtained using Collins' method on chest radiographs and those obtained by 3-D CT(r=0.95, p 0.05). 3-D CT can estimate pneumothorax volume with great accuracy. Collins' method is superior to Axel's method for the quantification of pneumothorax volume as seen on chest radiographs

The geology of the Collins Bay uranium deposit, Saskatchewan

International Nuclear Information System (INIS)

Jones, B.E.

1980-01-01

The Collins Bay deposit lies within the Churchill Province on the western edge of the Wollaston lithostructural domain where it underlies the eastern edge of the Helikian Athabasca Formation. It is 6 miles north-northeast of the Rabbit Lake mine. Two principal zones of uranium mineralization are described. The A zone, a partly eroded, high-grade pod of metal oxide and arsenides sheathed by clay-like minerals, which trends north-northeast and lies under 25 to 40 feet of water; and the B zone, which lies 6 000 ft south of the A, subcrops under till cover and is a partly eroded zone composed of metal oxide and arsenides which occur within variably altered Athabasca Formation. The deposit is typical of the unconformity-type uranium-nickel deposits of the Athabasca Basin. Observed features fit well with the diagenetic-hydrothermal model for such deposts. (auth)

Oral health status of children with treacher Collins syndrome.

Science.gov (United States)

da Silva Dalben, Gisele; Teixeira das Neves, Lucimara; Ribeiro Gomide, Marcia

2006-01-01

There is a lack of data on the oral health status of individuals with craniofacial syndromes. A group of 15 children with Treacher Collins syndrome, aged 5 to 15 years old, was examined and evaluated for plaque, caries and gingival problems. The ability of the patients to clean their teeth was also investigated. A high plaque index and poor efficacy of tooth-brushing was recorded. The caries and gingival indexes were not proportionally as high as the plaque accumulation. There was no association between the gingival index and presence of mouth breathing. There was predominance of the D component in both the dmft and DMFT indexes; this was associated with a need for restorative dental treatment in 60% of the patients, which indicated the need for dental care for these patients. Caretakers should be informed of the importance of oral health and oral hygiene and encouraged to take responsibility for the oral care of the children living at home.

History of the Fort Collins Science Center, U.S. Geological Survey

Science.gov (United States)

O'Shea, Thomas J. (compiler)

2006-01-01

The U.S. Geological Survey’s Fort Collins Science Center ("the Center") has been a nucleus of research, technology development, and associated scientific activities within the Department of the Interior for more than 30 years. The Center’s historical activities are deeply rooted in federal biological resources research and its supporting disciplines, particularly as they relate to the needs of the U.S. Department of the Interior and its resource management agencies. The organizational framework and activities of the Center have changed and adapted over the years in response to shifts in the scientific issues and challenges facing the U.S. Department of the Interior and with the development of new strategies to meet these challenges. Thus, the history of the Center has been dynamic.

Measurement of Collins asymmetries in inclusive production of charged pion pairs in e(+)e(-) annihilation at BABAR

NARCIS (Netherlands)

Lees, J. P.; Poireau, V.; Tisserand, V.; Grauges, E.; Palano, A.; Eigen, G.; Stugu, B.; Brown, D. N.; Kerth, L. T.; Kolomensky, Yu. G.; Lynch, G.; Schroeder, T.; Hearty, C.; Mattison, T. S.; McKenna, J. A.; So, R. Y.; Khan, A.; Blinov, V. E.; Buzykaev, A. R.; Druzhinin, V. P.; Golubev, V. B.; Kravchenko, E. A.; Onuchin, A. P.; Serednyakov, S. I.; Skovpen, Yu. I.; Solodov, E. P.; Todyshev, K. Yu.; Yushkov, A. N.; Kirkby, D.; Lankford, A. J.; Mandelkern, M.; Dey, B.; Gary, J. W.; Long, O.; Vitug, G. M.; Campagnari, C.; Sevilla, M. Franco; Hong, T. M.; Kovalskyi, D.; Richman, J. D.; West, C. A.; Eisner, A. M.; Lockman, W. S.; Schumm, B. A.; Seiden, A.; Chao, D. S.; Echenard, B.; Flood, K. T.; Hitlin, D. G.; Ongmongkolkul, P.; Andreassen, R.; Huard, Z.; Meadows, B. T.; Pushpawela, B. G.; Sokoloff, M. D.; Sun, L.; Bloom, P. C.; Ford, W. T.; Gaz, A.; Nauenberg, U.; Smith, J. G.; Wagner, S. R.; Ayad, R.; Toki, W. H.; Spaan, B.; Schwierz, R.; Bernard, D.; Verderi, M.; Playfer, S.; Bettoni, D.; Bozzi, C.; Calabrese, R.; Cibinetto, G.; Fioravanti, E.; Garzia, I.; Luppi, E.; Piemontese, L.; Santoro, V.; Baldini-Ferroli, R.; Calcaterra, A.; de Sangro, R.; Finocchiaro, G.; Martellotti, S.; Patteri, P.; Peruzzi, I. M.; Piccolo, M.; Rama, M.; Zallo, A.; Contri, R.; Guido, E.; Lo Vetere, M.; Monge, M. R.; Passaggio, S.; Patrignani, C.; Robutti, E.; Bhuyan, B.; Prasad, V.; Morii, M.; Adametz, A.; Uwer, U.; Lacker, H. M.; Dauncey, P. D.; Mallik, U.; Cochran, J.; Meyer, W. T.; Prell, S.; Gritsan, A. V.; Arnaud, N.; Davier, M.; Derkach, D.; Grosdidier, G.; Le Diberder, F.; Lutz, A. M.; Malaescu, B.; Roudeau, P.; Stocchi, A.; Wormser, G.; Lange, D. J.; Wright, D. M.; Coleman, J. P.; Fry, J. R.; Gabathuler, E.; Hutchcroft, D. E.; Payne, D. J.; Touramanis, C.; Bevan, A. J.; Di Lodovico, F.; Sacco, R.; Cowan, G.; Bougher, J.; Brown, D. N.; Davis, C. L.; Denig, A. G.; Fritsch, M.; Gradl, W.; Griessinger, K.; Hafner, A.; Prencipe, E.; Schubert, K. R.; Barlow, R. J.; Lafferty, G. D.; Behn, E.; Cenci, R.; Hamilton, B.; Jawahery, A.; Roberts, D. A.; Cowan, R.; Dujmic, D.; Sciolla, G.; Cheaib, R.; Patel, P. M.; Robertson, S. H.; Biassoni, P.; Neri, N.; Palombo, F.; Cremaldi, L.; Godang, R.; Sonnek, P.; Summers, D. J.; Simard, M.; Taras, P.; De Nardo, G.; Monorchio, D.; Onorato, G.; Sciacca, C.; Martinelli, M.; Raven, G.; Jessop, C. P.; LoSecco, J. M.; Honscheid, K.; Kass, R.; Brau, J.; Frey, R.; Sinev, N. B.; Strom, D.; Torrence, E.; Feltresi, E.; Margoni, M.; Morandin, M.; Posocco, M.; Rotondo, M.; Simi, G.; Simonetto, F.; Stroili, R.; Akar, S.; Ben-Haim, E.; Bomben, M.; Bonneaud, G. R.; Briand, H.; Calderini, G.; Chauveau, J.; Leruste, Ph.; Marchiori, G.; Ocariz, J.; Sitt, S.; Biasini, M.; Manoni, E.; Pacetti, S.; Rossi, A.; Angelini, C.; Batignani, G.; Bettarini, S.; Carpinelli, M.; Casarosa, G.; Cervelli, A.; Forti, F.; Giorgi, M. A.; Lusiani, A.; Oberhof, B.; Paoloni, E.; Perez, A.; Rizzo, G.; Walsh, J. J.; Pegna, D. Lopes; Olsen, J.; Smith, A. J. S.; Faccini, R.; Ferrarotto, F.; Ferroni, F.; Gaspero, M.; Gioi, L. Li; Piredda, G.; Buenger, C.; Grueberg, O.; Leddig, T.; Voss, C.; Waldi, R.; Adye, T.; Olaiya, E. O.; Wilson, F. F.; Emery, S.; de Monchenault, G. Hamel; Vasseur, G.; Yeche, Ch.; Anulli, F.; Aston, D.; Bard, D. J.; Benitez, J. F.; Cartaro, C.; Convery, M. R.; Dorfan, J.; Dubois-Felsmann, G. P.; Dunwoodie, W.; Ebert, M.; Field, R. C.; Fulsom, B. G.; Gabareen, A. M.; Graham, M. T.; Hast, C.; Innes, W. R.; Kim, P.; Kocian, M. L.; Leith, D. W. G. S.; Lewis, P.; Lindemann, D.; Lindquist, B.; Luitz, S.; Luth, V.; Lynch, H. L.; MacFarlane, D. B.; Muller, D. R.; Neal, H.; Nelson, S.; Perl, M.; Pulliam, T.; Ratcliff, B. N.; Roodman, A.; Salnikov, A. A.; Schindler, R. H.; Snyder, A.; Su, D.; Sullivan, M. K.; Va'vra, J.; Wisniewski, W. J.; Wittgen, M.; Wright, D. H.; Wulsin, H. W.; Ziegler, V.; Park, W.; Purohit, M. V.; White, R. M.; Wilson, J. R.; Randle-Conde, A.; Sekula, S. J.; Bellis, M.; Burchat, P. R.; Miyashita, T. S.; Puccio, E. M. T.; Alam, M. S.; Ernst, J. A.; Gorodeisky, R.; Guttman, N.; Peimer, D. R.; Soffer, A.; Spanier, S. M.; Ritchie, J. L.; Ruland, A. M.; Schwitters, R. F.; Wray, B. C.; Izen, J. M.; Lou, X. C.; Bianchi, F.; De Mori, F.; Filippi, A.; Gamba, D.; Zambito, S.; Lanceri, L.; Vitale, L.; Martinez-Vidal, F.; Oyanguren, A.; Villanueva-Perez, P.; Ahmed, H.; Albert, J.; Banerjee, Sw.; Bernlochner, F. U.; Choi, H. H. F.; Kowalewski, R.; Lewczuk, M. J.; Lueck, T.; Nugent, I. M.; Roney, J. M.; Sobie, R. J.; Tasneem, N.; Gershon, T. J.; Harrison, P. F.; Latham, T. E.; Band, H. R.; Dasu, S.; Pan, Y.; Prepost, R.

2014-01-01

We present measurements of Collins asymmetries in the inclusive process e+e−→ππX, where π stands for charged pions, at a center-of-mass energy of 10.6 GeV. We use a data sample of 468  fb−1 collected by the BABAR experiment at the PEP-II B factory at SLAC, and consider pairs of charged pions

Microcephaly, microtia, preauricular tags, choanal atresia and developmental delay in three unrelated patients: a mandibulofacial dysostosis distinct from Treacher Collins syndrome.

NARCIS (Netherlands)

Wieczorek, D.; Gener, B.; Gonzalez, M.J.; Seland, S.; Fischer, S.; Hehr, U.; Kuechler, A.; Hoefsloot, L.H.; Leeuw, N. de; Gillessen-Kaesbach, G.; Lohmann, D.R.

2009-01-01

Treacher Collins syndrome (TCS, OMIM 154500) is a well-defined mandibulofacial dysostosis characterized by symmetric facial anomalies consisting of malar hypoplasia, coloboma of the lower eyelid, dysplastic ears, micrognathia, cleft palate and deafness. Other mandibulofacial dysostoses (MDs) such as

Realistic Visualization of Virtual Views

DEFF Research Database (Denmark)

Livatino, Salvatore

2005-01-01

that can be impractical and sometime impossible. In addition, the artificial nature of data often makes visualized virtual scenarios not realistic enough. Not realistic in the sense that a synthetic scene is easy to discriminate visually from a natural scene. A new field of research has consequently...... developed and received much attention in recent years: Realistic Virtual View Synthesis. The main goal is a high fidelity representation of virtual scenarios while easing modeling and physical phenomena simulation. In particular, realism is achieved by the transfer to the novel view of all the physical...... phenomena captured in the reference photographs, (i.e. the transfer of photographic-realism). An overview of most prominent approaches in realistic virtual view synthesis will be presented and briefly discussed. Applications of proposed methods to visual survey, virtual cinematography, as well as mobile...

Triangulating and guarding realistic polygons

NARCIS (Netherlands)

Aloupis, G.; Bose, P.; Dujmovic, V.; Gray, C.M.; Langerman, S.; Speckmann, B.

2014-01-01

We propose a new model of realistic input: k-guardable objects. An object is k-guardable if its boundary can be seen by k guards. We show that k-guardable polygons generalize two previously identified classes of realistic input. Following this, we give two simple algorithms for triangulating

Realistic roofs over a rectilinear polygon

KAUST Repository

Ahn, Heekap

2013-11-01

Given a simple rectilinear polygon P in the xy-plane, a roof over P is a terrain over P whose faces are supported by planes through edges of P that make a dihedral angle π/4 with the xy-plane. According to this definition, some roofs may have faces isolated from the boundary of P or even local minima, which are undesirable for several practical reasons. In this paper, we introduce realistic roofs by imposing a few additional constraints. We investigate the geometric and combinatorial properties of realistic roofs and show that the straight skeleton induces a realistic roof with maximum height and volume. We also show that the maximum possible number of distinct realistic roofs over P is ((n-4)(n-4)/4 /2⌋) when P has n vertices. We present an algorithm that enumerates a combinatorial representation of each such roof in O(1) time per roof without repetition, after O(n4) preprocessing time. We also present an O(n5)-time algorithm for computing a realistic roof with minimum height or volume. © 2013 Elsevier B.V.

Long-term surveillance plan for the Collins Ranch disposal site, Lakeview, Oregon

International Nuclear Information System (INIS)

1994-08-01

This long-term surveillance plan (LTSP) for the Uranium Mill Tailings Remedial Action (UMTRA) Project Collins Ranch disposal site, Lakeview, Oregon, describes the surveillance activities for the disposal cell. The U.S. Department of Energy (DOE) will carry out these activities to ensure that the disposal cell continues to function as designed. This final LTSP was prepared as a requirement for acceptance under the U.S. Nuclear Regulatory Commission (NRC) general license for custody and long-term care of residual radioactive materials. This LTSP documents whether the land and interests are owned by the United States and details how long-term care of the disposal site will be carried out. It is based on the DOE's Guidance for Implementing the UMTRA Project Long-term Surveillance Program (DOE, 1992a)

A generalized Collins formula derived by virtue of the displacement-squeezing related squeezed coherent state representation

International Nuclear Information System (INIS)

Chuan-Mei, Xie; Shao-Long, Wan; Hong-Yi, Fan

2010-01-01

Based on the displacement-squeezing related squeezed coherent state representation |z) g and using the technique of integration within an ordered product of operators, this paper finds a generalized Fresnel operator, whose matrix element in the coordinate representation leads to a generalized Collins formula (Huygens–Fresnel integration transformation describing optical diffraction). The generalized Fresnel operator is derived by a quantum mechanical mapping from z to sz - rz * in the |z) g representation, while |z) g in phase space is graphically denoted by an ellipse. (classical areas of phenomenology)

Fort Collins Science Center fiscal year 2010 science accomplishments

Science.gov (United States)

Wilson, Juliette T.

2011-01-01

The scientists and technical professionals at the U.S. Geological Survey (USGS), Fort Collins Science Center (FORT), apply their diverse ecological, socioeconomic, and technological expertise to investigate complicated ecological problems confronting managers of the Nation's biological resources. FORT works closely with U.S. Department of the Interior (DOI) agency scientists, the academic community, other USGS science centers, and many other partners to provide critical information needed to help answer complex natural-resource management questions. In Fiscal Year 2010 (FY10), FORT's scientific and technical professionals conducted ongoing, expanded, and new research vital to the science needs and management goals of DOI, other Federal and State agencies, and nongovernmental organizations in the areas of aquatic systems and fisheries, climate change, data and information integration and management, invasive species, science support, security and technology, status and trends of biological resources (including the socioeconomic aspects), terrestrial and freshwater ecosystems, and wildlife resources, including threatened and endangered species. This report presents selected FORT science accomplishments for FY10 by the specific USGS mission area or science program with which each task is most closely associated, though there is considerable overlap. The report also includes all FORT publications and other products published in FY10, as well as staff accomplishments, appointments, committee assignments, and invited presentations.

Proposed Regulation of Fuels and Fuel Additives: Federal Volatility Control Program in the Denver-Boulder-Greeley-Ft. Collins-Loveland, Colorado, 1997 8-Hour Ozone Nonattainment Area

Science.gov (United States)

This notice proposes establishing an applicable standard of 7.8 pounds (psi) Reid vapor pressure under the federal volatility control program, in the Denver-Boulder-Greeley-Ft. Collins-Loveland, Colorado, 1997 8-hour ozone nonattainment area.

Anthony Collins revisitado : deísmo, panteísmo y ateísmo en los tiempos modernos

OpenAIRE

Benítez, Miguel

2007-01-01

Con ocasión de la refutación de una interpretación reciente del pensamiento de Anthony Collins, fundada en presupuestos metodológicos erráticos y tributarios, en definitiva, de la concepción propia de los apologistas en tiempos de las Luces, este trabajo denuncia los abusos en la historiografía de los tiempos modernos de una mal llamada lectura entre líneas, que implica no el examen detenido del texto en su complejidad, sino el menosprecio de la letra, y pr...

Curing "moral disability": brain trauma and self-control in Victorian science and fiction.

Science.gov (United States)

Schillace, Brandy L

2013-12-01

While, historically, the disabled body has appeared in literature as "monstrous," burgeoning psychological theories of the Victorian period predicated an unusual shift. In a culture of sexual anxiety and fears of devolution and moral decay, the physically disabled and "weak" are portrayed as strangely free from moral corruption. Unlike the cultural link between deviance and disability witnessed in the medical literature and eugenic approach to generation, authors of narrative fiction-particularly Charles Dickens, but Wilkie Collins, Charlotte Yonge, and others as well-portray disabled characters as "purified," and trauma itself as potentially sanitizing. This present paper argues that such constructions were made possible by developments in the treatment of insanity. "Curing 'Moral Disability': Brain Trauma and Self-Control in Victorian Fiction," examines the concept of trauma-as-cure. Throughout the Victorian period, case studies on brain trauma appeared in widely circulated journals like the Lancet, concurrently with burgeoning theories about psychological disturbance and "moral insanity." While not widely practiced until the early twentieth century, attempts at surgical "cures" aroused curiosity and speculation-the traumatic event that could free sufferers from deviance. This work provides a unique perspective on representations of disability as cure in the nineteenth century as a means of giving voice to the marginalized, disabled, and disempowered.

Tuukka Kaidesoja on Critical Realist Transcendental Realism

Directory of Open Access Journals (Sweden)

Groff Ruth

2015-09-01

Full Text Available I argue that critical realists think pretty much what Tukka Kaidesoja says that he himself thinks, but also that Kaidesoja’s objections to the views that he attributes to critical realists are not persuasive.

Generating realistic roofs over a rectilinear polygon

KAUST Repository

Ahn, Heekap

2011-01-01

Given a simple rectilinear polygon P in the xy-plane, a roof over P is a terrain over P whose faces are supported by planes through edges of P that make a dihedral angle π/4 with the xy-plane. In this paper, we introduce realistic roofs by imposing a few additional constraints. We investigate the geometric and combinatorial properties of realistic roofs, and show a connection with the straight skeleton of P. We show that the maximum possible number of distinct realistic roofs over P is ( ⌊(n-4)/4⌋ (n-4)/2) when P has n vertices. We present an algorithm that enumerates a combinatorial representation of each such roof in O(1) time per roof without repetition, after O(n 4) preprocessing time. We also present an O(n 5)-time algorithm for computing a realistic roof with minimum height or volume. © 2011 Springer-Verlag.

Development of a realistic human airway model.

Science.gov (United States)

Lizal, Frantisek; Elcner, Jakub; Hopke, Philip K; Jedelsky, Jan; Jicha, Miroslav

2012-03-01

Numerous models of human lungs with various levels of idealization have been reported in the literature; consequently, results acquired using these models are difficult to compare to in vivo measurements. We have developed a set of model components based on realistic geometries, which permits the analysis of the effects of subsequent model simplification. A realistic digital upper airway geometry except for the lack of an oral cavity has been created which proved suitable both for computational fluid dynamics (CFD) simulations and for the fabrication of physical models. Subsequently, an oral cavity was added to the tracheobronchial geometry. The airway geometry including the oral cavity was adjusted to enable fabrication of a semi-realistic model. Five physical models were created based on these three digital geometries. Two optically transparent models, one with and one without the oral cavity, were constructed for flow velocity measurements, two realistic segmented models, one with and one without the oral cavity, were constructed for particle deposition measurements, and a semi-realistic model with glass cylindrical airways was developed for optical measurements of flow velocity and in situ particle size measurements. One-dimensional phase doppler anemometry measurements were made and compared to the CFD calculations for this model and good agreement was obtained.

Interim obturator in an infant with Treacher Collins syndrome: Review and chairside modification in impression making

Directory of Open Access Journals (Sweden)

Sudhir Bhandari

2011-01-01

Full Text Available Treacher Collins syndrome has been described as a syndrome involving 1st and 2nd branchial arches, affecting various organs in the craniofacial region. Affected infants report with nasal regurgitation and minimal dietary intake due to cleft palate, consequently show delayed and retarded growth. The situation is further complicated when the repair of the palatal defect is postponed due to delayed milestones. At this juncture, it is of paramount importance to intervene prosthetically and close the defect with the aid of an interim obturator. Herein we describe a simple, yet successful, chairside approach to make an impression of an infant without the aid of any kind of anesthesia.

Kuhn: Realist or Antirealist?

Directory of Open Access Journals (Sweden)

Michel Ghins

1998-06-01

Full Text Available Although Kuhn is much more an antirealist than a realist, the earlier and later articulations of realist and antirealist ingredients in his views merit close scrutiny. What are the constituents of the real invariant World posited by Kuhn and its relation to the mutable paradigm-related worlds? Various proposed solutions to this problem (dubbed the "new-world problem" by Ian Hacking are examined and shown to be unsatisfactory. In The Structure of Scientific Revolutions, the stable World can reasonably be taken to be made up of ordinary perceived objects, whereas in Kuhn's later works the transparadigmatic World is identified with something akin to the Kantian world-in-itself. It is argued that both proposals are beset with insuperable difficulties which render Kuhn's earlier and later versions of antirealism implausible.

Adapting realist synthesis methodology: The case of workplace harassment interventions.

Science.gov (United States)

Carr, Tracey; Quinlan, Elizabeth; Robertson, Susan; Gerrard, Angie

2017-12-01

Realist synthesis techniques can be used to assess complex interventions by extracting and synthesizing configurations of contexts, mechanisms, and outcomes found in the literature. Our novel and multi-pronged approach to the realist synthesis of workplace harassment interventions describes our pursuit of theory to link macro and program level theories. After discovering the limitations of a dogmatic approach to realist synthesis, we adapted our search strategy and focused our analysis on a subset of data. We tailored our realist synthesis to understand how, why, and under what circumstances workplace harassment interventions are effective. The result was a conceptual framework to test our theory-based interventions and provide the basis for subsequent realist evaluation. Our experience documented in this article contributes to an understanding of how, under what circumstances, and with what consequences realist synthesis principles can be customized. Copyright © 2017 John Wiley & Sons, Ltd.

Experimental investigation of transverse spin asymmetries in muon-p SIDIS processes: Collins asymmetries

CERN Document Server

Adolph, C.; Alexakhin, V.Yu.; Alexandrov, Yu.; Alexeev, G.D.; Amoroso, A.; Antonov, A.A.; Austregesilo, A.; Badelek, B.; Balestra, F.; Barth, J.; Baum, G.; Bedfer, Y.; Bernhard, J.; Bertini, R.; Bettinelli, M.; Bicker, K.; Bieling, J.; Birsa, R.; Bisplinghoff, J.; Bordalo, P.; Bradamante, F.; Braun, C.; Bravar, A.; Bressan, A.; Burtin, E.; Capozza, L.; Chiosso, M.; Chung, S.U.; Cicuttin, A.; Crespo, M.L.; Dalla Torre, S.; Das, S.; Dasgupta, S.S.; Dasgupta, S.; Denisov, O.Yu.; Dhara, L.; Donskov, S.V.; Doshita, N.; Duic, V.; Dunnweber, W.; Dziewiecki, M.; Efremov, A.; Elia, C.; Eversheim, P.D.; Eyrich, W.; Faessler, M.; Ferrero, A.; Filin, A.; Finger, M.; Fischer, H.; Franco, C.; von Hohenesche, N.du Fresne; Friedrich, J.M.; Frolov, V.; Garfagnini, R.; Gautheron, F.; Gavrichtchouk, O.P.; Gerassimov, S.; Geyer, R.; Giorgi, M.; Gnesi, I.; Gobbo, B.; Goertz, S.; Grabmuller, S.; Grasso, A.; Grube, B.; Gushterski, R.; Guskov, A.; Guthorl, T.; Haas, F.; von Harrach, D.; Heinsius, F.H.; Herrmann, F.; Hess, C.; Hinterberger, F.; Horikawa, N.; Hoppner, Ch.; d'Hose, N.; Ishimoto, S.; Ivanov, O.; Ivanshin, Yu.; Iwata, T.; Jahn, R.; Jary, V.; Jasinski, P.; Joosten, R.; Kabuss, E.; Kang, D.; Ketzer, B.; Khaustov, G.V.; Khokhlov, Yu.A.; Kisselev, Yu.; Klein, F.; Klimaszewski, K.; Koblitz, S.; Koivuniemi, J.H.; Kolosov, V.N.; Kondo, K.; Konigsmann, K.; Konorov, I.; Konstantinov, V.F.; Korzenev, A.; Kotzinian, A.M.; Kouznetsov, O.; Kramer, M.; Kroumchtein, Z.V.; Kunne, F.; Kurek, K.; Lauser, L.; Lednev, A.A.; Lehmann, A.; Levorato, S.; Lichtenstadt, J.; Liska, T.; Maggiora, A.; Magnon, A.; Makke, N.; Mallot, G.K.; Mann, A.; Marchand, C.; Martin, A.; Marzec, J.; Matsuda, T.; Meshcheryakov, G.; Meyer, W.; Michigami, T.; Mikhailov, Yu.V.; Moinester, M.A.; Morreale, A.; Mutter, A.; Nagaytsev, A.; Nagel, T.; Negrini, T.; Nerling, F.; Neubert, S.; Neyret, D.; Nikolaenko, V.I.; Nowak, W.D.; Nunes, A.S.; Olshevsky, A.G.; Ostrick, M.; Padee, A.; Panknin, R.; Panzieri, D.; Parsamyan, B.; Paul, S.; Perevalova, E.; Pesaro, G.; Peshekhonov, D.V.; Piragino, G.; Platchkov, S.; Pochodzalla, J.; Polak, J.; Polyakov, V.A.; Pretz, J.; Quaresma, M.; Quintans, C.; Rajotte, J.F.; Ramos, S.; Rapatsky, V.; Reicherz, G.; Richter, A.; Rocco, E.; Rondio, E.; Rossiyskaya, N.S.; Ryabchikov, D.I.; Samoylenko, V.D.; Sandacz, A.; Sapozhnikov, M.G.; Sarkar, S.; Savin, I.A.; Sbrizzai, G.; Schiavon, P.; Schill, C.; Schluter, T.; Schmidt, K.; Schmitt, L.; Schonning, K.; Schopferer, S.; Schott, M.; Schroder, W.; Shevchenko, O.Yu.; Silva, L.; Sinha, L.; Sissakian, A.N.; Slunecka, M.; Smirnov, G.I.; Sosio, S.; Sozzi, F.; Srnka, A.; Steiger, L.; Stolarski, M.; Sulc, M.; Sulej, R.; Suzuki, H.; Sznajder, P.; Takekawa, S.; Wolbeek, J.Ter; Tessaro, S.; Tessarotto, F.; Tkatchev, L.G.; Uhl, S.; Uman, I.; Vandenbroucke, M.; Virius, M.; Vlassov, N.V.; Wang, L.; Wilfert, M.; Windmolders, R.; Wislicki, W.; Wollny, H.; Zaremba, K.; Zavertyaev, M.; Zemlyanichkina, E.; Ziembicki, M.; Zhuravlev, N.; Zvyagin, A.

2012-10-31

The COMPASS Collaboration at CERN has measured the transverse spin azimuthal asymmetry of charged hadrons produced in semi-inclusive deep inelastic scattering using a 160 GeV positive muon beam and a transversely polarised NH_3 target. The Collins asymmetry of the proton was extracted in the Bjorken x range 0.003

Evaluation of photovoltaic panel temperature in realistic scenarios

International Nuclear Information System (INIS)

Du, Yanping; Fell, Christopher J.; Duck, Benjamin; Chen, Dong; Liffman, Kurt; Zhang, Yinan; Gu, Min; Zhu, Yonggang

2016-01-01

Highlights: • The developed realistic model captures more reasonably the thermal response and hysteresis effects. • The predicted panel temperature is as high as 60 °C under a solar irradiance of 1000 W/m"2 in no-wind weather. • In realistic scenarios, the thermal response normally takes 50–250 s. • The actual heating effect may cause a photoelectric efficiency drop of 2.9–9.0%. - Abstract: Photovoltaic (PV) panel temperature was evaluated by developing theoretical models that are feasible to be used in realistic scenarios. Effects of solar irradiance, wind speed and ambient temperature on the PV panel temperature were studied. The parametric study shows significant influence of solar irradiance and wind speed on the PV panel temperature. With an increase of ambient temperature, the temperature rise of solar cells is reduced. The characteristics of panel temperature in realistic scenarios were analyzed. In steady weather conditions, the thermal response time of a solar cell with a Si thickness of 100–500 μm is around 50–250 s. While in realistic scenarios, the panel temperature variation in a day is different from that in steady weather conditions due to the effect of thermal hysteresis. The heating effect on the photovoltaic efficiency was assessed based on real-time temperature measurement of solar cells in realistic weather conditions. For solar cells with a temperature coefficient in the range of −0.21%∼−0.50%, the current field tests indicated an approximate efficiency loss between 2.9% and 9.0%.

Connections between collinear and transverse-momentum-dependent polarized observables within the Collins-Soper-Sterman formalism

Science.gov (United States)

Gamberg, Leonard; Metz, Andreas; Pitonyak, Daniel; Prokudin, Alexei

2018-06-01

We extend the improved Collins-Soper-Sterman (iCSS) W + Y construction recently presented in [1] to the case of polarized observables, where we focus in particular on the Sivers effect in semi-inclusive deep-inelastic scattering. We further show how one recovers the expected leading-order collinear twist-3 result from a (weighted) qT-integral of the differential cross section. We are also able to demonstrate the validity of the well-known relation between the (TMD) Sivers function and the (collinear twist-3) Qiu-Sterman function within the iCSS framework. This relation allows for their interpretation as functions yielding the average transverse momentum of unpolarized quarks in a transversely polarized spin-1/2 target. We further outline how this study can be generalized to other polarized quantities.

Realist synthesis: illustrating the method for implementation research

Directory of Open Access Journals (Sweden)

Rycroft-Malone Jo

2012-04-01

Full Text Available Abstract Background Realist synthesis is an increasingly popular approach to the review and synthesis of evidence, which focuses on understanding the mechanisms by which an intervention works (or not. There are few published examples of realist synthesis. This paper therefore fills a gap by describing, in detail, the process used for a realist review and synthesis to answer the question ‘what interventions and strategies are effective in enabling evidence-informed healthcare?’ The strengths and challenges of conducting realist review are also considered. Methods The realist approach involves identifying underlying causal mechanisms and exploring how they work under what conditions. The stages of this review included: defining the scope of the review (concept mining and framework formulation; searching for and scrutinising the evidence; extracting and synthesising the evidence; and developing the narrative, including hypotheses. Results Based on key terms and concepts related to various interventions to promote evidence-informed healthcare, we developed an outcome-focused theoretical framework. Questions were tailored for each of four theory/intervention areas within the theoretical framework and were used to guide development of a review and data extraction process. The search for literature within our first theory area, change agency, was executed and the screening procedure resulted in inclusion of 52 papers. Using the questions relevant to this theory area, data were extracted by one reviewer and validated by a second reviewer. Synthesis involved organisation of extracted data into evidence tables, theming and formulation of chains of inference, linking between the chains of inference, and hypothesis formulation. The narrative was developed around the hypotheses generated within the change agency theory area. Conclusions Realist synthesis lends itself to the review of complex interventions because it accounts for context as well as

Sotsialistlik realist Keskküla

Index Scriptorium Estoniae

1998-01-01

Londonis 1998. a. ilmunud inglise kunstikriitiku Matthew Cullerne Bowni monograafias "Socialist Realist Painting" on eesti kunstnikest Enn Põldroos, Nikolai Kormashov, Ando Keskküla, Kormashovi ja Keskküla maalide reproduktsioonid

Are there realistically interpretable local theories?

International Nuclear Information System (INIS)

d'Espagnat, B.

1989-01-01

Although it rests on strongly established proofs, the statement that no realistically interpretable local theory is compatible with some experimentally testable predictions of quantum mechanics seems at first sight to be incompatible with a few general ideas and clear-cut statements occurring in recent theoretical work by Griffiths, Omnes, and Ballentine and Jarrett. It is shown here that in fact none of the developments due to these authors can be considered as a realistically interpretable local theory, so that there is no valid reason for suspecting that the existing proofs of the statement in question are all flawed

Realistic Real-Time Outdoor Rendering in Augmented Reality

Science.gov (United States)

Kolivand, Hoshang; Sunar, Mohd Shahrizal

2014-01-01

Realistic rendering techniques of outdoor Augmented Reality (AR) has been an attractive topic since the last two decades considering the sizeable amount of publications in computer graphics. Realistic virtual objects in outdoor rendering AR systems require sophisticated effects such as: shadows, daylight and interactions between sky colours and virtual as well as real objects. A few realistic rendering techniques have been designed to overcome this obstacle, most of which are related to non real-time rendering. However, the problem still remains, especially in outdoor rendering. This paper proposed a much newer, unique technique to achieve realistic real-time outdoor rendering, while taking into account the interaction between sky colours and objects in AR systems with respect to shadows in any specific location, date and time. This approach involves three main phases, which cover different outdoor AR rendering requirements. Firstly, sky colour was generated with respect to the position of the sun. Second step involves the shadow generation algorithm, Z-Partitioning: Gaussian and Fog Shadow Maps (Z-GaF Shadow Maps). Lastly, a technique to integrate sky colours and shadows through its effects on virtual objects in the AR system, is introduced. The experimental results reveal that the proposed technique has significantly improved the realism of real-time outdoor AR rendering, thus solving the problem of realistic AR systems. PMID:25268480

Realistic real-time outdoor rendering in augmented reality.

Directory of Open Access Journals (Sweden)

Hoshang Kolivand

Full Text Available Realistic rendering techniques of outdoor Augmented Reality (AR has been an attractive topic since the last two decades considering the sizeable amount of publications in computer graphics. Realistic virtual objects in outdoor rendering AR systems require sophisticated effects such as: shadows, daylight and interactions between sky colours and virtual as well as real objects. A few realistic rendering techniques have been designed to overcome this obstacle, most of which are related to non real-time rendering. However, the problem still remains, especially in outdoor rendering. This paper proposed a much newer, unique technique to achieve realistic real-time outdoor rendering, while taking into account the interaction between sky colours and objects in AR systems with respect to shadows in any specific location, date and time. This approach involves three main phases, which cover different outdoor AR rendering requirements. Firstly, sky colour was generated with respect to the position of the sun. Second step involves the shadow generation algorithm, Z-Partitioning: Gaussian and Fog Shadow Maps (Z-GaF Shadow Maps. Lastly, a technique to integrate sky colours and shadows through its effects on virtual objects in the AR system, is introduced. The experimental results reveal that the proposed technique has significantly improved the realism of real-time outdoor AR rendering, thus solving the problem of realistic AR systems.

'Semi-realistic'F-term inflation model building in supergravity

International Nuclear Information System (INIS)

Kain, Ben

2008-01-01

We describe methods for building 'semi-realistic' models of F-term inflation. By semi-realistic we mean that they are built in, and obey the requirements of, 'semi-realistic' particle physics models. The particle physics models are taken to be effective supergravity theories derived from orbifold compactifications of string theory, and their requirements are taken to be modular invariance, absence of mass terms and stabilization of moduli. We review the particle physics models, their requirements and tools and methods for building inflation models

Generating realistic images using Kray

Science.gov (United States)

Tanski, Grzegorz

2004-07-01

Kray is an application for creating realistic images. It is written in C++ programming language, has a text-based interface, solves global illumination problem using techniques such as radiosity, path tracing and photon mapping.

Prenatal Diagnosis of Treacher-Collins Syndrome Using Three-Dimensional Ultrasonography and Differential Diagnosis with Other Acrofacial Dysostosis Syndromes

Directory of Open Access Journals (Sweden)

Daniela Cardoso Pereira

2013-01-01

Full Text Available Treacher-Collins syndrome (TCS is a rare dominant autosomal anomaly resulting from malformation or disruption of the development of the first and second branchial arches. It is characterized by micrognathia, malar hypoplasia, and malformations of the eyes and ears. The prenatal diagnosis using two-dimensional ultrasonography (2DUS is characterized by identification of facial malformations together with polyhydramnios. Three-dimensional ultrasonography (3DUS has the capacity to spatially display these facial malformations, thus making it easy for the parents to understand them. We present a case of TCS diagnosed in the 33rd week using 3DUS, with postnatal confirmation using cranial computed tomography and anatomopathological analysis.

Toward realistic pursuit-evasion using a roadmap-based approach

KAUST Repository

Rodriguez, Samuel; Denny, Jory; Burgos, Juan; Mahadevan, Aditya; Manavi, Kasra; Murray, Luke; Kodochygov, Anton; Zourntos, Takis; Amato, Nancy M.

2011-01-01

be applied to more realistic scenarios than are typically studied in most previous work, including agents moving in 3D environments such as terrains, multi-story buildings, and dynamic environments. We also support more realistic three-dimensional visibility

On Realistically Attacking Tor with Website Fingerprinting

Directory of Open Access Journals (Sweden)

Wang Tao

2016-10-01

Full Text Available Website fingerprinting allows a local, passive observer monitoring a web-browsing client’s encrypted channel to determine her web activity. Previous attacks have shown that website fingerprinting could be a threat to anonymity networks such as Tor under laboratory conditions. However, there are significant differences between laboratory conditions and realistic conditions. First, in laboratory tests we collect the training data set together with the testing data set, so the training data set is fresh, but an attacker may not be able to maintain a fresh data set. Second, laboratory packet sequences correspond to a single page each, but for realistic packet sequences the split between pages is not obvious. Third, packet sequences may include background noise from other types of web traffic. These differences adversely affect website fingerprinting under realistic conditions. In this paper, we tackle these three problems to bridge the gap between laboratory and realistic conditions for website fingerprinting. We show that we can maintain a fresh training set with minimal resources. We demonstrate several classification-based techniques that allow us to split full packet sequences effectively into sequences corresponding to a single page each. We describe several new algorithms for tackling background noise. With our techniques, we are able to build the first website fingerprinting system that can operate directly on packet sequences collected in the wild.

Iterated interactions method. Realistic NN potential

International Nuclear Information System (INIS)

Gorbatov, A.M.; Skopich, V.L.; Kolganova, E.A.

1991-01-01

The method of iterated potential is tested in the case of realistic fermionic systems. As a base for comparison calculations of the 16 O system (using various versions of realistic NN potentials) by means of the angular potential-function method as well as operators of pairing correlation were used. The convergence of genealogical series is studied for the central Malfliet-Tjon potential. In addition the mathematical technique of microscopical calculations is improved: new equations for correlators in odd states are suggested and the technique of leading terms was applied for the first time to calculations of heavy p-shell nuclei in the basis of angular potential functions

Realistic Material Appearance Modelling

Czech Academy of Sciences Publication Activity Database

Haindl, Michal; Filip, Jiří; Hatka, Martin

2010-01-01

Roč. 2010, č. 81 (2010), s. 13-14 ISSN 0926-4981 R&D Projects: GA ČR GA102/08/0593 Institutional research plan: CEZ:AV0Z10750506 Keywords : bidirectional texture function * texture modelling Subject RIV: BD - Theory of Information http:// library .utia.cas.cz/separaty/2010/RO/haindl-realistic material appearance modelling.pdf

A Radiosity Approach to Realistic Image Synthesis

Science.gov (United States)

1992-12-01

AD-A259 082 AFIT/GCE/ENG/92D-09 A RADIOSITY APPROACH TO REALISTIC IMAGE SYNTHESIS THESIS Richard L. Remington Captain, USAF fl ECTE AFIT/GCE/ENG/92D...09 SJANl 1993U 93-00134 Approved for public release; distribution unlimited 93& 1! A -A- AFIT/GCE/ENG/92D-09 A RADIOSITY APPROACH TO REALISTIC IMAGE...assistance in creating the input geometry file for the AWACS aircraft interior. Without his assistance, a good model for the diffuse radiosity implementation

The Introductory Advertising Course: Organization, Content, Textbooks and Testing; Proceedings of the Association for Education in Journalism-Junior College Journalism Association Advertising Workshop (Ft. Collins, Colorado, August, 1973).

Science.gov (United States)

Lynn, Jerry R., Ed.; Bowers, Thomas A., Ed.

This report describes the proceedings of the Association for Education in Journalism--Junior College Journalism Association Advertising Workshop, held at Fort Collins, Colorado, with the general objective of organizing an introductory advertising course. The specific objectives of the workshop were to determine the content, textbooks, and types of…

Orofacial functions and oral health associated with Treacher Collins syndrome.

Science.gov (United States)

Asten, Pamela; Skogedal, Nina; Nordgarden, Hilde; Axelsson, Stefan; Akre, Harriet; Sjögreen, Lotta

2013-01-01

The aim of this study was to describe orofacial features and functions and oral health associated with Treacher Collins syndrome (TCS) in relation to the variable phenotypic expression of the condition. The Nordic Orofacial Test-Screening (NOT-S), MHC Questionnaire, MHC Observation chart and clinical examinations of nasal and pharyngeal conditions and chewing and swallowing function were used to assess 19 individuals aged 5-74 years (median 34 years). TCS severity scores were calculated by a clinical geneticist. Orofacial features characterizing the study group were altered profile, increased mandibular angle, narrow hypopharynx and facial asymmetry. Basic orofacial functions such as breathing, eating, facial expression and speech were affected in all subjects demonstrating orofacial dysfunction in at least two NOT-S domains (median NOT-S total score 4/12, range 2-7). Significant correlation was found between the TCS severity scores reflecting phenotypic expression and the NOT-S total scores reflecting orofacial function. Self-reported experience of dry oral mucosa was common. Overall, dental health was good with few carious lesions diagnosed, but considerable need for orthodontic treatment was documented. Altered orofacial features and functions in TCS are common and often persist into late adolescence and adulthood. The functional level was correlated with the phenotypic variability of the condition. The standard of oral health was satisfactory. The findings indicated that individuals with TCS are likely to require lifelong health services related to their oral condition.

Survey of Approaches to Generate Realistic Synthetic Graphs

Energy Technology Data Exchange (ETDEWEB)

Lim, Seung-Hwan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lee, Sangkeun [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Powers, Sarah S [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Shankar, Mallikarjun [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Imam, Neena [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-10-01

A graph is a flexible data structure that can represent relationships between entities. As with other data analysis tasks, the use of realistic graphs is critical to obtaining valid research results. Unfortunately, using the actual ("real-world") graphs for research and new algorithm development is difficult due to the presence of sensitive information in the data or due to the scale of data. This results in practitioners developing algorithms and systems that employ synthetic graphs instead of real-world graphs. Generating realistic synthetic graphs that provide reliable statistical confidence to algorithmic analysis and system evaluation involves addressing technical hurdles in a broad set of areas. This report surveys the state of the art in approaches to generate realistic graphs that are derived from fitted graph models on real-world graphs.

A Low-cost System for Generating Near-realistic Virtual Actors

Science.gov (United States)

Afifi, Mahmoud; Hussain, Khaled F.; Ibrahim, Hosny M.; Omar, Nagwa M.

2015-06-01

Generating virtual actors is one of the most challenging fields in computer graphics. The reconstruction of a realistic virtual actor has been paid attention by the academic research and the film industry to generate human-like virtual actors. Many movies were acted by human-like virtual actors, where the audience cannot distinguish between real and virtual actors. The synthesis of realistic virtual actors is considered a complex process. Many techniques are used to generate a realistic virtual actor; however they usually require expensive hardware equipment. In this paper, a low-cost system that generates near-realistic virtual actors is presented. The facial features of the real actor are blended with a virtual head that is attached to the actor's body. Comparing with other techniques that generate virtual actors, the proposed system is considered a low-cost system that requires only one camera that records the scene without using any expensive hardware equipment. The results of our system show that the system generates good near-realistic virtual actors that can be used on many applications.

Problem Posing with Realistic Mathematics Education Approach in Geometry Learning

Science.gov (United States)

Mahendra, R.; Slamet, I.; Budiyono

2017-09-01

One of the difficulties of students in the learning of geometry is on the subject of plane that requires students to understand the abstract matter. The aim of this research is to determine the effect of Problem Posing learning model with Realistic Mathematics Education Approach in geometry learning. This quasi experimental research was conducted in one of the junior high schools in Karanganyar, Indonesia. The sample was taken using stratified cluster random sampling technique. The results of this research indicate that the model of Problem Posing learning with Realistic Mathematics Education Approach can improve students’ conceptual understanding significantly in geometry learning especially on plane topics. It is because students on the application of Problem Posing with Realistic Mathematics Education Approach are become to be active in constructing their knowledge, proposing, and problem solving in realistic, so it easier for students to understand concepts and solve the problems. Therefore, the model of Problem Posing learning with Realistic Mathematics Education Approach is appropriately applied in mathematics learning especially on geometry material. Furthermore, the impact can improve student achievement.

Novel high-fidelity realistic explosion damage simulation for urban environments

Science.gov (United States)

Liu, Xiaoqing; Yadegar, Jacob; Zhu, Youding; Raju, Chaitanya; Bhagavathula, Jaya

2010-04-01

Realistic building damage simulation has a significant impact in modern modeling and simulation systems especially in diverse panoply of military and civil applications where these simulation systems are widely used for personnel training, critical mission planning, disaster management, etc. Realistic building damage simulation should incorporate accurate physics-based explosion models, rubble generation, rubble flyout, and interactions between flying rubble and their surrounding entities. However, none of the existing building damage simulation systems sufficiently faithfully realize the criteria of realism required for effective military applications. In this paper, we present a novel physics-based high-fidelity and runtime efficient explosion simulation system to realistically simulate destruction to buildings. In the proposed system, a family of novel blast models is applied to accurately and realistically simulate explosions based on static and/or dynamic detonation conditions. The system also takes account of rubble pile formation and applies a generic and scalable multi-component based object representation to describe scene entities and highly scalable agent-subsumption architecture and scheduler to schedule clusters of sequential and parallel events. The proposed system utilizes a highly efficient and scalable tetrahedral decomposition approach to realistically simulate rubble formation. Experimental results demonstrate that the proposed system has the capability to realistically simulate rubble generation, rubble flyout and their primary and secondary impacts on surrounding objects including buildings, constructions, vehicles and pedestrians in clusters of sequential and parallel damage events.

Turundus peab tantsima tarbija tujude järgi / Anne Tuurand

Index Scriptorium Estoniae

Tuurand, Anne

2000-01-01

Kuidas mõjutavad ühiskonnas toimuvad muutused tarbimist ja turundust. Uudistoodete omaksvõtt ja omaksvõtjate erinevused. Turundusstrateegia sõltuvus tarbijakäitumist kujundavatest teguritest. Artikli kirjutamise alus: W.L. Wilkie "Consumer Behavior", 1990

Progress in realistic LOCA analysis

Energy Technology Data Exchange (ETDEWEB)

Young, M Y; Bajorek, S M; Ohkawa, K [Westinghouse Electric Corporation, Pittsburgh, PA (United States)

1994-12-31

While LOCA is a complex transient to simulate, the state of art in thermal hydraulics has advanced sufficiently to allow its realistic prediction and application of advanced methods to actual reactor design as demonstrated by methodology described in this paper 6 refs, 5 figs, 3 tabs

Should scientific realists be platonists?

DEFF Research Database (Denmark)

Busch, Jacob; Morrison, Joe

2015-01-01

an appropriate use of the resources of Scientific Realism (in particular, IBE) to achieve platonism? (§2) We argue that just because a variety of different inferential strategies can be employed by Scientific Realists does not mean that ontological conclusions concerning which things we should be Scientific...

a structure of persuasion in galatians: epistolary and rhetorical

African Journals Online (AJOL)

tions of Christ and Paul as embodiments of faithfulness and commitment in suffering, .... has been criticised by Richard E. Vatz for requiring “a 'realist' philosophy of ..... the dark as to what the nature of “the other gospel” is, or how the gospel of ...... San Francisco: Collins. STIREWALT, M.L.. 2003. Paul the letter writer.

Time management: a realistic approach.

Science.gov (United States)

Jackson, Valerie P

2009-06-01

Realistic time management and organization plans can improve productivity and the quality of life. However, these skills can be difficult to develop and maintain. The key elements of time management are goals, organization, delegation, and relaxation. The author addresses each of these components and provides suggestions for successful time management.

Triangulating and guarding realistic polygons

NARCIS (Netherlands)

Aloupis, G.; Bose, P.; Dujmovic, V.; Gray, C.M.; Langerman, S.; Speckmann, B.

2008-01-01

We propose a new model of realistic input: k-guardable objects. An object is k-guardable if its boundary can be seen by k guards in the interior of the object. In this abstract, we describe a simple algorithm for triangulating k-guardable polygons. Our algorithm, which is easily implementable, takes

Work, health and wellbeing: the challenges of managing health at work

National Research Council Canada - National Science Library

Vickerstaff, Sarah; Phillipson, Chris; Wilkie, Ross

2012-01-01

... has been requested. ISBN 978 1 84742 808 0 hardback The rights of Sarah Vickerstaff, Chris Phillipson and Ross Wilkie to be identified as editors of this work has been asserted by them in accordance wit...

Separable expansion for realistic multichannel scattering problems

International Nuclear Information System (INIS)

Canton, L.; Cattapan, G.; Pisent, G.

1987-01-01

A new approach to the multichannel scattering problem with realistic local or nonlocal interactions is developed. By employing the negative-energy solutions of uncoupled Sturmian eigenvalue problems referring to simple auxiliary potentials, the coupling interactions appearing to the original multichannel problem are approximated by finite-rank potentials. By resorting to integral-equation tecniques the coupled-channel equations are then reduced to linear algebraic equations which can be straightforwardly solved. Compact algebraic expressions for the relevant scattering matrix elements are thus obtained. The convergence of the method is tasted in the single-channel case with realistic optical potentials. Excellent agreement is obtained with a few terms in the separable expansion for both real and absorptive interactions

Realistic nurse-led policy implementation, optimization and evaluation: novel methodological exemplar.

Science.gov (United States)

Noyes, Jane; Lewis, Mary; Bennett, Virginia; Widdas, David; Brombley, Karen

2014-01-01

To report the first large-scale realistic nurse-led implementation, optimization and evaluation of a complex children's continuing-care policy. Health policies are increasingly complex, involve multiple Government departments and frequently fail to translate into better patient outcomes. Realist methods have not yet been adapted for policy implementation. Research methodology - Evaluation using theory-based realist methods for policy implementation. An expert group developed the policy and supporting tools. Implementation and evaluation design integrated diffusion of innovation theory with multiple case study and adapted realist principles. Practitioners in 12 English sites worked with Consultant Nurse implementers to manipulate the programme theory and logic of new decision-support tools and care pathway to optimize local implementation. Methods included key-stakeholder interviews, developing practical diffusion of innovation processes using key-opinion leaders and active facilitation strategies and a mini-community of practice. New and existing processes and outcomes were compared for 137 children during 2007-2008. Realist principles were successfully adapted to a shorter policy implementation and evaluation time frame. Important new implementation success factors included facilitated implementation that enabled 'real-time' manipulation of programme logic and local context to best-fit evolving theories of what worked; using local experiential opinion to change supporting tools to more realistically align with local context and what worked; and having sufficient existing local infrastructure to support implementation. Ten mechanisms explained implementation success and differences in outcomes between new and existing processes. Realistic policy implementation methods have advantages over top-down approaches, especially where clinical expertise is low and unlikely to diffuse innovations 'naturally' without facilitated implementation and local optimization. © 2013

RenderGAN: Generating Realistic Labeled Data

Directory of Open Access Journals (Sweden)

Leon Sixt

2018-06-01

Full Text Available Deep Convolutional Neuronal Networks (DCNNs are showing remarkable performance on many computer vision tasks. Due to their large parameter space, they require many labeled samples when trained in a supervised setting. The costs of annotating data manually can render the use of DCNNs infeasible. We present a novel framework called RenderGAN that can generate large amounts of realistic, labeled images by combining a 3D model and the Generative Adversarial Network framework. In our approach, image augmentations (e.g., lighting, background, and detail are learned from unlabeled data such that the generated images are strikingly realistic while preserving the labels known from the 3D model. We apply the RenderGAN framework to generate images of barcode-like markers that are attached to honeybees. Training a DCNN on data generated by the RenderGAN yields considerably better performance than training it on various baselines.

Neutron star models with realistic high-density equations of state

International Nuclear Information System (INIS)

Malone, R.C.; Johnson, M.B.; Bethe, H.A.

1975-01-01

We calculate neutron star models using four realistic high-density models of the equation of state. We conclude that the maximum mass of a neutron star is unlikely to exceed 2 M/sub sun/. All of the realistic models are consistent with current estimates of the moment of inertia of the Crab pulsar

Bell Operator Method to Classify Local Realistic Theories

International Nuclear Information System (INIS)

Nagata, Koji

2010-01-01

We review the historical fact of multipartite Bell inequalities with an arbitrary number of settings. An explicit local realistic model for the values of a correlation function, given in a two-setting Bell experiment (two-setting model), works only for the specific set of settings in the given experiment, but cannot construct a local realistic model for the values of a correlation function, given in a continuous-infinite settings Bell experiment (infinite-setting model), even though there exist two-setting models for all directions in space. Hence, the two-setting model does not have the property that the infinite-setting model has. Here, we show that an explicit two-setting model cannot construct a local realistic model for the values of a correlation function, given in an M-setting Bell experiment (M-setting model), even though there exist two-setting models for the M measurement directions chosen in the given M-setting experiment. Hence, the two-setting model does not have the property that the M-setting model has. (general)

Blend Shape Interpolation and FACS for Realistic Avatar

Science.gov (United States)

Alkawaz, Mohammed Hazim; Mohamad, Dzulkifli; Basori, Ahmad Hoirul; Saba, Tanzila

2015-03-01

The quest of developing realistic facial animation is ever-growing. The emergence of sophisticated algorithms, new graphical user interfaces, laser scans and advanced 3D tools imparted further impetus towards the rapid advancement of complex virtual human facial model. Face-to-face communication being the most natural way of human interaction, the facial animation systems became more attractive in the information technology era for sundry applications. The production of computer-animated movies using synthetic actors are still challenging issues. Proposed facial expression carries the signature of happiness, sadness, angry or cheerful, etc. The mood of a particular person in the midst of a large group can immediately be identified via very subtle changes in facial expressions. Facial expressions being very complex as well as important nonverbal communication channel are tricky to synthesize realistically using computer graphics. Computer synthesis of practical facial expressions must deal with the geometric representation of the human face and the control of the facial animation. We developed a new approach by integrating blend shape interpolation (BSI) and facial action coding system (FACS) to create a realistic and expressive computer facial animation design. The BSI is used to generate the natural face while the FACS is employed to reflect the exact facial muscle movements for four basic natural emotional expressions such as angry, happy, sad and fear with high fidelity. The results in perceiving the realistic facial expression for virtual human emotions based on facial skin color and texture may contribute towards the development of virtual reality and game environment of computer aided graphics animation systems.

Fatigue - determination of a more realistic usage factor

International Nuclear Information System (INIS)

Lang, H.

2001-01-01

The ability to use a suitable counting method for determining the stress range spectrum in elastic and simplified elastic-plastic fatigue analyses is of crucial importance for enabling determination of a realistic usage factor. Determination of elastic-plastic strain range using the K e factor from fictitious elastically calculated loads is also important in the event of elastic behaviour being exceeded. This paper thus examines both points in detail. A fatigue module with additional options, which functions on this basis is presented. The much more realistic determination of usage factor presented here offers various economic benefits depending on the application

Realistic rhetoric and legal decision

Directory of Open Access Journals (Sweden)

João Maurício Adeodato

2017-06-01

Full Text Available The text aims to lay the foundations of a realistic rhetoric, from the descriptive perspective of how the legal decision actually takes place, without normative considerations. Aristotle's rhetorical idealism and its later prestige reduced rhetoric to the art of persuasion, eliminating important elements of sophistry, especially with regard to legal decision. It concludes with a rhetorical perspective of judicial activism in complex societies.

Realistic molecular model of kerogen's nanostructure.

Science.gov (United States)

Bousige, Colin; Ghimbeu, Camélia Matei; Vix-Guterl, Cathie; Pomerantz, Andrew E; Suleimenova, Assiya; Vaughan, Gavin; Garbarino, Gaston; Feygenson, Mikhail; Wildgruber, Christoph; Ulm, Franz-Josef; Pellenq, Roland J-M; Coasne, Benoit

2016-05-01

Despite kerogen's importance as the organic backbone for hydrocarbon production from source rocks such as gas shale, the interplay between kerogen's chemistry, morphology and mechanics remains unexplored. As the environmental impact of shale gas rises, identifying functional relations between its geochemical, transport, elastic and fracture properties from realistic molecular models of kerogens becomes all the more important. Here, by using a hybrid experimental-simulation method, we propose a panel of realistic molecular models of mature and immature kerogens that provide a detailed picture of kerogen's nanostructure without considering the presence of clays and other minerals in shales. We probe the models' strengths and limitations, and show that they predict essential features amenable to experimental validation, including pore distribution, vibrational density of states and stiffness. We also show that kerogen's maturation, which manifests itself as an increase in the sp(2)/sp(3) hybridization ratio, entails a crossover from plastic-to-brittle rupture mechanisms.

Good-to-Great Superintendents: An Examination of Jim Collins' Good-to-Great Level Five Leadership Attributes as Demonstrated by the Leadership Behaviors of Superintendents of High-Performing California Public Single-School Districts

Science.gov (United States)

Brown, James D.

2010-01-01

Purpose: The purpose of this study was to examine Collins' good-to-great Level Five leadership attributes, as demonstrated by the leadership behaviors of superintendents of high-performing California public single-school districts. Methodology: The researcher used a case study design to conduct this study. Personal interviews were conducted in…

On the Realistic Stochastic Model of GPS Observables: Implementation and Performance

Science.gov (United States)

Zangeneh-Nejad, F.; Amiri-Simkooei, A. R.; Sharifi, M. A.; Asgari, J.

2015-12-01

High-precision GPS positioning requires a realistic stochastic model of observables. A realistic GPS stochastic model of observables should take into account different variances for different observation types, correlations among different observables, the satellite elevation dependence of observables precision, and the temporal correlation of observables. Least-squares variance component estimation (LS-VCE) is applied to GPS observables using the geometry-based observation model (GBOM). To model the satellite elevation dependent of GPS observables precision, an exponential model depending on the elevation angles of the satellites are also employed. Temporal correlation of the GPS observables is modelled by using a first-order autoregressive noise model. An important step in the high-precision GPS positioning is double difference integer ambiguity resolution (IAR). The fraction or percentage of success among a number of integer ambiguity fixing is called the success rate. A realistic estimation of the GNSS observables covariance matrix plays an important role in the IAR. We consider the ambiguity resolution success rate for two cases, namely a nominal and a realistic stochastic model of the GPS observables using two GPS data sets collected by the Trimble R8 receiver. The results confirm that applying a more realistic stochastic model can significantly improve the IAR success rate on individual frequencies, either on L1 or on L2. An improvement of 20% was achieved to the empirical success rate results. The results also indicate that introducing the realistic stochastic model leads to a larger standard deviation for the baseline components by a factor of about 2.6 on the data sets considered.

ACHP | Advisory Council on Historic Preservation Membership

Science.gov (United States)

Suquamish Museum. Forsman is a graduate of the University of Washington (B.A. Anthropology) and Goucher with a number of national conservation organizations and initiatives, having co-founded the African Robert Wilkie) Ex-officio representatives of national preservation organizations round out ACHP's

Photo-Realistic Image Synthesis and Virtual Cinematography

DEFF Research Database (Denmark)

Livatino, Salvatore

2005-01-01

Realistic Virtual View Synthesis is a new field of research that has received increasing attention in recent years. It is strictly related to the grown popularity of virtual reality and the spread of its applications, among which virtual photography and cinematography. The use of computer generated...... characters, "virtual actors", in the motion picture production increases every day. While the most known computer graphics techniques have largely been adopted successfully in nowadays fictions, it still remains very challenging to implement virtual actors which would resemble, visually, human beings....... Interestingly, film directors have been looking at the recent progress achieved by the research community in the field of realistic visualization of virtual views, and they have successfully implemented state of the art research approaches in their productions. An innovative concept is then gaining consensus...

I-Love relations for incompressible stars and realistic stars

Science.gov (United States)

Chan, T. K.; Chan, AtMa P. O.; Leung, P. T.

2015-02-01

In spite of the diversity in the equations of state of nuclear matter, the recently discovered I-Love-Q relations [Yagi and Yunes, Science 341, 365 (2013), 10.1126/science.1236462], which relate the moment of inertia, tidal Love number (deformability), and the spin-induced quadrupole moment of compact stars, hold for various kinds of realistic neutron stars and quark stars. While the physical origin of such universality is still a current issue, the observation that the I-Love-Q relations of incompressible stars can well approximate those of realistic compact stars hints at a new direction to approach the problem. In this paper, by establishing recursive post-Minkowskian expansion for the moment of inertia and the tidal deformability of incompressible stars, we analytically derive the I-Love relation for incompressible stars and show that the so-obtained formula can be used to accurately predict the behavior of realistic compact stars from the Newtonian limit to the maximum mass limit.

"Closing the Loop": Overcoming barriers to locally sourcing food in Fort Collins, Colorado

Science.gov (United States)

DeMets, C. M.

2012-12-01

Environmental sustainability has become a focal point for many communities in recent years, and restaurants are seeking creative ways to become more sustainable. As many chefs realize, sourcing food locally is an important step towards sustainability and towards building a healthy, resilient community. Review of literature on sustainability in restaurants and the local food movement revealed that chefs face many barriers to sourcing their food locally, but that there are also many solutions for overcoming these barriers that chefs are in the early stages of exploring. Therefore, the purpose of this research is to identify barriers to local sourcing and investigate how some restaurants are working to overcome those barriers in the city of Fort Collins, Colorado. To do this, interviews were conducted with four subjects who guide purchasing decisions for restaurants in Fort Collins. Two of these restaurants have created successful solutions and are able to source most of their food locally. The other two are interested in and working towards sourcing locally but have not yet been able to overcome barriers, and therefore only source a few local items. Findings show that there are four barriers and nine solutions commonly identified by each of the subjects. The research found differences between those who source most of their food locally and those who have not made as much progress in local sourcing. Based on these results, two solution flowcharts were created, one for primary barriers and one for secondary barriers, for restaurants to assess where they are in the local food chain and how they can more successfully source food locally. As there are few explicit connections between this research question and climate change, it is important to consider the implicit connections that motivate and justify this research. The question of whether or not greenhouse gas emissions are lower for locally sourced food is a topic of much debate, and while there are major developments

Hyper-realistic face masks: a new challenge in person identification.

Science.gov (United States)

Sanders, Jet Gabrielle; Ueda, Yoshiyuki; Minemoto, Kazusa; Noyes, Eilidh; Yoshikawa, Sakiko; Jenkins, Rob

2017-01-01

We often identify people using face images. This is true in occupational settings such as passport control as well as in everyday social environments. Mapping between images and identities assumes that facial appearance is stable within certain bounds. For example, a person's apparent age, gender and ethnicity change slowly, if at all. It also assumes that deliberate changes beyond these bounds (i.e., disguises) would be easy to spot. Hyper-realistic face masks overturn these assumptions by allowing the wearer to look like an entirely different person. If unnoticed, these masks break the link between facial appearance and personal identity, with clear implications for applied face recognition. However, to date, no one has assessed the realism of these masks, or specified conditions under which they may be accepted as real faces. Herein, we examined incidental detection of unexpected but attended hyper-realistic masks in both photographic and live presentations. Experiment 1 (UK; n = 60) revealed no evidence for overt detection of hyper-realistic masks among real face photos, and little evidence of covert detection. Experiment 2 (Japan; n = 60) extended these findings to different masks, mask-wearers and participant pools. In Experiment 3 (UK and Japan; n = 407), passers-by failed to notice that a live confederate was wearing a hyper-realistic mask and showed limited evidence of covert detection, even at close viewing distance (5 vs. 20 m). Across all of these studies, viewers accepted hyper-realistic masks as real faces. Specific countermeasures will be required if detection rates are to be improved.

Putting a Realistic Theory of Mind into Agency Theory

DEFF Research Database (Denmark)

Foss, Nicolai Juul; Stea, Diego

2014-01-01

Agency theory is one of the most important foundational theories in management research, but it rests on contestable cognitive assumptions. Specifically, the principal is assumed to hold a perfect (correct) theory regarding some of the content of the agent's mind, while he is entirely ignorant...... concerning other such content. More realistically, individuals have some limited access to the minds of others. We explore the implications for classical agency theory of realistic assumptions regarding the human potential for interpersonal sensemaking. We discuss implications for the design and management...

Realistic searches on stretched exponential networks

Indian Academy of Sciences (India)

We consider navigation or search schemes on networks which have a degree distribution of the form () ∝ exp(−). In addition, the linking probability is taken to be dependent on social distances and is governed by a parameter . The searches are realistic in the sense that not all search chains can be completed.

Results of recent calculations using realistic potentials

International Nuclear Information System (INIS)

Friar, J.L.

1987-01-01

Results of recent calculations for the triton using realistic potentials with strong tensor forces are reviewed, with an emphasis on progress made using the many different calculational schemes. Several test problems are suggested. 49 refs., 5 figs

Simple and Realistic Data Generation

DEFF Research Database (Denmark)

Pedersen, Kenneth Houkjær; Torp, Kristian; Wind, Rico

2006-01-01

This paper presents a generic, DBMS independent, and highly extensible relational data generation tool. The tool can efficiently generate realistic test data for OLTP, OLAP, and data streaming applications. The tool uses a graph model to direct the data generation. This model makes it very simple...... to generate data even for large database schemas with complex inter- and intra table relationships. The model also makes it possible to generate data with very accurate characteristics....

Realistic Approach for Phasor Measurement Unit Placement

DEFF Research Database (Denmark)

Rather, Zakir Hussain; Chen, Zhe; Thøgersen, Paul

2015-01-01

This paper presents a realistic cost-effectivemodel for optimal placement of phasor measurement units (PMUs) for complete observability of a power system considering practical cost implications. The proposed model considers hidden or otherwise unaccounted practical costs involved in PMU...... installation. Consideration of these hidden but significant and integral part of total PMU installation costs was inspired from practical experience on a real-life project. The proposedmodel focuses on the minimization of total realistic costs instead of a widely used theoretical concept of a minimal number...... of PMUs. The proposed model has been applied to IEEE 14-bus, IEEE 24-bus, IEEE 30-bus, New England 39-bus, and large power system of 300 buses and real life Danish grid. A comparison of the presented results with those reported by traditionalmethods has also been shown to justify the effectiveness...

Getting realistic; Endstation Demut

Energy Technology Data Exchange (ETDEWEB)

Meyer, J.P.

2004-01-28

The fuel cell hype of the turn of the millenium has reached its end. The industry is getting realistic. If at all, fuel cell systems for private single-family and multiple dwellings will not be available until the next decade. With a Europe-wide field test, Vaillant intends to advance the PEM technology. [German] Der Brennstoffzellen-Hype der Jahrtausendwende ist verfolgen. Die Branche uebt sich in Bescheidenheit. Die Marktreife der Systeme fuer Ein- und Mehrfamilienhaeuser wird - wenn ueberhaupt - wohl erst im naechsten Jahrzehnt erreicht sein. Vaillant will durch einen europaweiten Feldtest die Entwicklung der PEM-Technologie vorantreiben. (orig.)

Two-Capacitor Problem: A More Realistic View.

Science.gov (United States)

Powell, R. A.

1979-01-01

Discusses the two-capacitor problem by considering the self-inductance of the circuit used and by determining how well the usual series RC circuit approximates the two-capacitor problem when realistic values of L, C, and R are chosen. (GA)

Satellite Maps Deliver More Realistic Gaming

Science.gov (United States)

2013-01-01

When Redwood City, California-based Electronic Arts (EA) decided to make SSX, its latest snowboarding video game, it faced challenges in creating realistic-looking mountains. The solution was NASA's ASTER Global Digital Elevation Map, made available by the Jet Propulsion Laboratory, which EA used to create 28 real-life mountains from 9 different ranges for its award-winning game.

The mutational spectrum in Treacher Collins syndrome reveals a predominance of mutations that create a premature-termination codon

Energy Technology Data Exchange (ETDEWEB)

Edwards, S.J.; Gladwin, A.J.; Dixon, M.J. [Univ. of Manchester (United Kingdom)

1997-03-01

Treacher Collins syndrome (TCS) is an autosomal dominant disorder of craniofacial development, the features of which include conductive hearing loss and cleft palate. The TCS locus has been mapped to human chromosome 5q31.3-32 and the mutated gene identified. In the current investigation, 25 previously undescribed mutations, which are spread throughout the gene, are presented. This brings the total reported to date to 35, which represents a detection rate of 60%. Of the mutations that have been reported to date, all but one result in the introduction of a premature-termination codon into the predicted protein, treacle. Moreover, the mutations are largely family specific, although a common 5-bp deletion in exon 24 (seven different families) and a recurrent splicing mutation in intron 3 (two different families) have been identified. This mutational spectrum supports the hypothesis that TCS results from haploin-sufficiency. 49 refs., 4 figs., 3 tabs.

Interferometric data modelling: issues in realistic data generation

International Nuclear Information System (INIS)

Mukherjee, Soma

2004-01-01

This study describes algorithms developed for modelling interferometric noise in a realistic manner, i.e. incorporating non-stationarity that can be seen in the data from the present generation of interferometers. The noise model is based on individual component models (ICM) with the application of auto regressive moving average (ARMA) models. The data obtained from the model are vindicated by standard statistical tests, e.g. the KS test and Akaike minimum criterion. The results indicate a very good fit. The advantage of using ARMA for ICMs is that the model parameters can be controlled and hence injection and efficiency studies can be conducted in a more controlled environment. This realistic non-stationary noise generator is intended to be integrated within the data monitoring tool framework

Realist cinema as world cinema

OpenAIRE

Nagib, Lucia

2017-01-01

The idea that “realism” is the common denominator across the vast range of productions normally labelled as “world cinema” is widespread and seemly uncontroversial. Leaving aside oppositional binaries that define world cinema as the other of Hollywood or of classical cinema, this chapter will test the realist premise by locating it in the mode of production. It will define this mode as an ethics that engages filmmakers, at cinema’s creative peaks, with the physical and historical environment,...

The Effect of Realistic Mathematics Education Approach on Students' Achievement And Attitudes Towards Mathematics

Directory of Open Access Journals (Sweden)

Effandi Zakaria

2017-02-01

Full Text Available This study was conducted to determine the effect of Realistic Mathematics Education Approach on mathematics achievement and student attitudes towards mathematics. This study also sought determine the relationship between student achievement and attitudes towards mathematics. This study used a quasi-experimental design conducted on 61 high school students at SMA Unggul Sigli. Students were divided into two groups, the treatment group $(n = 30$ namely, the Realistic Mathematics Approach group (PMR and the control group $(n = 31$ namely, the traditional group. This study was conducted for six weeks. The instruments used in this study were the achievement test and the attitudes towards mathematics questionnaires. Data were analyzed using SPSS. To determine the difference in mean achievement and attitudes between the two groups, data were analyzed using one-way ANOVA test. The result showed significant differences between the Realistic Mathematics Approach and the traditional approach in terms of achievement. The study showed no significant difference between the Realistic Mathematics Approach and the traditional approach in term of attitudes towards mathematics. It can be concluded that the use of realistic mathematics education approach enhanced students' mathematics achievement, but not attitudes towards mathematics. The Realistic Mathematics Education Approach encourage students to participate actively in the teaching and learning of mathematics. Thus, Realistic Mathematics Education Approach is an appropriate methods to improve the quality of teaching and learning process.

Realistic Noise Assessment and Strain Analysis of Iranian Permanent GPS Stations

Science.gov (United States)

Razeghi, S. M.; Amiri Simkooei, A. A.; Sharifi, M. A.

2012-04-01

To assess noise characteristics of Iranian Permanent GPS Stations (IPGS), northwestern part of this network namely Azerbaijan Continuous GPS Station (ACGS), was selected. For a realistic noise assessment it is required to model all deterministic signals of the GPS time series by means of least squares harmonic estimation (LS-HE) and derive all periodic behavior of the series. After taking all deterministic signals into account, the least squares variance component estimation (LS-VCE) is used to obtain a realistic noise model (white noise plus flicker noise) of the ACGS. For this purpose, one needs simultaneous GPS time series for which a multivariate noise assessment is applied. Having determined realistic noise model, a realistic strain analysis of the network is obtained for which one relies on the finite element methods. Finite element is now considered to be a new functional model and the new stochastic model is given based on the multivariate noise assessment using LS-VCE. The deformation rates of the components along with their full covariance matries are input to the strain analysis. Further, the results are also provided using a pure white noise model. The normalized strains for these two models show that the strain parameters derived from a realistic noise model are less significant than those derived from the white model. This could be either due to the short time span of the time series used or due to the intrinsic behavior of the strain parameters in the ACGS. Longer time series are required to further elaborate this issue.

Generating realistic roofs over a rectilinear polygon

KAUST Repository

Ahn, Heekap; Bae, Sangwon; Knauer, Christian; Lee, Mira; Shin, Chansu; Vigneron, Antoine E.

2011-01-01

Given a simple rectilinear polygon P in the xy-plane, a roof over P is a terrain over P whose faces are supported by planes through edges of P that make a dihedral angle π/4 with the xy-plane. In this paper, we introduce realistic roofs by imposing

Realistic Visualization of Virtual Views and Virtual Cinema

DEFF Research Database (Denmark)

Livatino, Salvatore

2005-01-01

Realistic Virtual View Visualization is a new field of research which has received increasing attention in recent years. It is strictly related to the increased popularity of virtual reality and the spread of its applications, among which virtual photography and cinematography. The use of computer...... generated characters, "virtual actors", in the motion picture production increases every day. While the most known computer graphics techniques have largely been adopted successfully in nowadays fictions, it still remains very challenging to implement virtual actors which would resemble, visually, human...... beings. Interestingly, film directors have been looking at the recent progress achieved by the research community in the field of realistic visualization of virtual views, and they have successfully implemented state of the art research approaches in their productions. An innovative concept...

Realistic and efficient 2D crack simulation

Science.gov (United States)

Yadegar, Jacob; Liu, Xiaoqing; Singh, Abhishek

2010-04-01

Although numerical algorithms for 2D crack simulation have been studied in Modeling and Simulation (M&S) and computer graphics for decades, realism and computational efficiency are still major challenges. In this paper, we introduce a high-fidelity, scalable, adaptive and efficient/runtime 2D crack/fracture simulation system by applying the mathematically elegant Peano-Cesaro triangular meshing/remeshing technique to model the generation of shards/fragments. The recursive fractal sweep associated with the Peano-Cesaro triangulation provides efficient local multi-resolution refinement to any level-of-detail. The generated binary decomposition tree also provides efficient neighbor retrieval mechanism used for mesh element splitting and merging with minimal memory requirements essential for realistic 2D fragment formation. Upon load impact/contact/penetration, a number of factors including impact angle, impact energy, and material properties are all taken into account to produce the criteria of crack initialization, propagation, and termination leading to realistic fractal-like rubble/fragments formation. The aforementioned parameters are used as variables of probabilistic models of cracks/shards formation, making the proposed solution highly adaptive by allowing machine learning mechanisms learn the optimal values for the variables/parameters based on prior benchmark data generated by off-line physics based simulation solutions that produce accurate fractures/shards though at highly non-real time paste. Crack/fracture simulation has been conducted on various load impacts with different initial locations at various impulse scales. The simulation results demonstrate that the proposed system has the capability to realistically and efficiently simulate 2D crack phenomena (such as window shattering and shards generation) with diverse potentials in military and civil M&S applications such as training and mission planning.

Analysis of Heterogeneous Networks with Dual Connectivity in a Realistic Urban Deployment

DEFF Research Database (Denmark)

Gerardino, Guillermo Andrés Pocovi; Barcos, Sonia; Wang, Hua

2015-01-01

the performance in this realistic layout. Due to the uneven load distribution observed in realistic deployments, DC is able to provide fast load balancing gains also at relatively high load - and not only at low load as typically observed in 3GPP scenarios. For the same reason, the proposed cell selection...

Bilateral Malar Reconstruction Using Patient-Specific Polyether Ether Ketone Implants in Treacher-Collins Syndrome Patients With Absent Zygomas.

Science.gov (United States)

Sainsbury, David C G; George, Alan; Forrest, Christopher R; Phillips, John H

2017-03-01

The authors performed bilateral malar reconstruction using polyether ether ketone implants in 3 patients with Treacher-Collins syndrome with absent, as opposed to hypoplastic, zygomata. These patient-specific implants were fabricated using computed-aided design software reformatted from three-dimensional bony preoperative computed tomography images. The first time the authors performed this procedure the implant compressed the globe resulting in temporary anisocoria that was quickly recognized intraoperatively. The implant was immediately removed and the patient made a full-recovery with no ocular disturbance. The computer-aided design and manufacturing process was adjusted to include periorbital soft-tissue boundaries to aid in contouring the new implants. The same patient, and 2 further patients, subsequently underwent malar reconstruction using this soft tissue periorbital boundary fabrication process with an additional 2 mm relief removed from the implant's orbital surface. These subsequent procedures were performed without complication and with pleasing aesthetic results. The authors describe their experience and the salutary lessons learnt.

An Overview of Westinghouse Realistic Large Break LOCA Evaluation Model

Directory of Open Access Journals (Sweden)

Cesare Frepoli

2008-01-01

Full Text Available Since the 1988 amendment of the 10 CFR 50.46 rule in 1988, Westinghouse has been developing and applying realistic or best-estimate methods to perform LOCA safety analyses. A realistic analysis requires the execution of various realistic LOCA transient simulations where the effect of both model and input uncertainties are ranged and propagated throughout the transients. The outcome is typically a range of results with associated probabilities. The thermal/hydraulic code is the engine of the methodology but a procedure is developed to assess the code and determine its biases and uncertainties. In addition, inputs to the simulation are also affected by uncertainty and these uncertainties are incorporated into the process. Several approaches have been proposed and applied in the industry in the framework of best-estimate methods. Most of the implementations, including Westinghouse, follow the Code Scaling, Applicability and Uncertainty (CSAU methodology. Westinghouse methodology is based on the use of the WCOBRA/TRAC thermal-hydraulic code. The paper starts with an overview of the regulations and its interpretation in the context of realistic analysis. The CSAU roadmap is reviewed in the context of its implementation in the Westinghouse evaluation model. An overview of the code (WCOBRA/TRAC and methodology is provided. Finally, the recent evolution to nonparametric statistics in the current edition of the W methodology is discussed. Sample results of a typical large break LOCA analysis for a PWR are provided.

Le syndrome de la pince aorto-mésentérique: rare, mais pensez-y ...

African Journals Online (AJOL)

Le syndrome de la pince aorto-mésentérique «SPAM » ou syndrome de Wilkie, est une obstruction ... Les états de dénutrition avancés en sont souvent la caus e, et le SPAM se manifeste ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

TMS modeling toolbox for realistic simulation.

Science.gov (United States)

Cho, Young Sun; Suh, Hyun Sang; Lee, Won Hee; Kim, Tae-Seong

2010-01-01

Transcranial magnetic stimulation (TMS) is a technique for brain stimulation using rapidly changing magnetic fields generated by coils. It has been established as an effective stimulation technique to treat patients suffering from damaged brain functions. Although TMS is known to be painless and noninvasive, it can also be harmful to the brain by incorrect focusing and excessive stimulation which might result in seizure. Therefore there is ongoing research effort to elucidate and better understand the effect and mechanism of TMS. Lately Boundary element method (BEM) and Finite element method (FEM) have been used to simulate the electromagnetic phenomenon of TMS. However, there is a lack of general tools to generate the models of TMS due to some difficulties in realistic modeling of the human head and TMS coils. In this study, we have developed a toolbox through which one can generate high-resolution FE TMS models. The toolbox allows creating FE models of the head with isotropic and anisotropic electrical conductivities in five different tissues of the head and the coils in 3D. The generated TMS model is importable to FE software packages such as ANSYS for further and efficient electromagnetic analysis. We present a set of demonstrative results of realistic simulation of TMS with our toolbox.

Realistic edge field model code REFC for designing and study of isochronous cyclotron

International Nuclear Information System (INIS)

Ismail, M.

1989-01-01

The focussing properties and the requirements for isochronism in cyclotron magnet configuration are well-known in hard edge field model. The fact that they quite often change considerably in realistic field can be attributed mainly to the influence of the edge field. A solution to this problem requires a field model which allows a simple construction of equilibrium orbit and yield simple formulae. This can be achieved by using a fitted realistic edge field (Hudson et al 1975) in the region of the pole edge and such a field model is therefore called a realistic edge field model. A code REFC based on realistic edge field model has been developed to design the cyclotron sectors and the code FIELDER has been used to study the beam properties. In this report REFC code has been described along with some relevant explaination of the FIELDER code. (author). 11 refs., 6 figs

Realistic terrain visualization based on 3D virtual world technology

Science.gov (United States)

Huang, Fengru; Lin, Hui; Chen, Bin; Xiao, Cai

2010-11-01

The rapid advances in information technologies, e.g., network, graphics processing, and virtual world, have provided challenges and opportunities for new capabilities in information systems, Internet applications, and virtual geographic environments, especially geographic visualization and collaboration. In order to achieve meaningful geographic capabilities, we need to explore and understand how these technologies can be used to construct virtual geographic environments to help to engage geographic research. The generation of three-dimensional (3D) terrain plays an important part in geographical visualization, computer simulation, and virtual geographic environment applications. The paper introduces concepts and technologies of virtual worlds and virtual geographic environments, explores integration of realistic terrain and other geographic objects and phenomena of natural geographic environment based on SL/OpenSim virtual world technologies. Realistic 3D terrain visualization is a foundation of construction of a mirror world or a sand box model of the earth landscape and geographic environment. The capabilities of interaction and collaboration on geographic information are discussed as well. Further virtual geographic applications can be developed based on the foundation work of realistic terrain visualization in virtual environments.

Realistic Affective Forecasting: The Role of Personality

Science.gov (United States)

Hoerger, Michael; Chapman, Ben; Duberstein, Paul

2016-01-01

Affective forecasting often drives decision making. Although affective forecasting research has often focused on identifying sources of error at the event level, the present investigation draws upon the ‘realistic paradigm’ in seeking to identify factors that similarly influence predicted and actual emotions, explaining their concordance across individuals. We hypothesized that the personality traits neuroticism and extraversion would account for variation in both predicted and actual emotional reactions to a wide array of stimuli and events (football games, an election, Valentine’s Day, birthdays, happy/sad film clips, and an intrusive interview). As hypothesized, individuals who were more introverted and neurotic anticipated, correctly, that they would experience relatively more unpleasant emotional reactions, and those who were more extraverted and less neurotic anticipated, correctly, that they would experience relatively more pleasant emotional reactions. Personality explained 30% of the concordance between predicted and actual emotional reactions. Findings suggest three purported personality processes implicated in affective forecasting, highlight the importance of individual-differences research in this domain, and call for more research on realistic affective forecasts. PMID:26212463

Beyond the realist turn: a socio-material analysis of heart failure self-care.

Science.gov (United States)

McDougall, Allan; Kinsella, Elizabeth Anne; Goldszmidt, Mark; Harkness, Karen; Strachan, Patricia; Lingard, Lorelei

2018-01-01

For patients living with chronic illnesses, self-care has been linked with positive outcomes such as decreased hospitalisation, longer lifespan, and improved quality of life. However, despite calls for more and better self-care interventions, behaviour change trials have repeatedly fallen short on demonstrating effectiveness. The literature on heart failure (HF) stands as a case in point, and a growing body of HF studies advocate realist approaches to self-care research and policymaking. We label this trend the 'realist turn' in HF self-care. Realist evaluation and realist interventions emphasise that the relationship between self-care interventions and positive health outcomes is not fixed, but contingent on social context. This paper argues socio-materiality offers a productive framework to expand on the idea of social context in realist accounts of HF self-care. This study draws on 10 interviews as well as researcher reflections from a larger study exploring health care teams for patients with advanced HF. Leveraging insights from actor-network theory (ANT), this study provides two rich narratives about the contextual factors that influence HF self-care. These descriptions portray not self-care contexts but self-care assemblages, which we discuss in light of socio-materiality. © 2018 Foundation for the Sociology of Health & Illness.

Sensation fiction, gender and identity

NARCIS (Netherlands)

MacDonald, T.; Mangham, A.

2013-01-01

The heroine of Wilkie Collins’s The Law and the Lady (1875), Valeria Macallan, is in many ways a typical sensation heroine. She is resilient, independent and determined to get what she wants. What she wants, however, is not to marry rich, hide her bigamous past or inherit a fortune that is

Role-playing for more realistic technical skills training.

Science.gov (United States)

Nikendei, C; Zeuch, A; Dieckmann, P; Roth, C; Schäfer, S; Völkl, M; Schellberg, D; Herzog, W; Jünger, J

2005-03-01

Clinical skills are an important and necessary part of clinical competence. Simulation plays an important role in many fields of medical education. Although role-playing is common in communication training, there are no reports about the use of student role-plays in the training of technical clinical skills. This article describes an educational intervention with analysis of pre- and post-intervention self-selected student survey evaluations. After one term of skills training, a thorough evaluation showed that the skills-lab training did not seem very realistic nor was it very demanding for trainees. To create a more realistic training situation and to enhance students' involvement, case studies and role-plays with defined roles for students (i.e. intern, senior consultant) were introduced into half of the sessions. Results of the evaluation in the second term showed that sessions with role-playing were rated significantly higher than sessions without role-playing.

Toward realistic pursuit-evasion using a roadmap-based approach

KAUST Repository

Rodriguez, Samuel

2011-05-01

In this work, we describe an approach for modeling and simulating group behaviors for pursuit-evasion that uses a graph-based representation of the environment and integrates multi-agent simulation with roadmap-based path planning. Our approach can be applied to more realistic scenarios than are typically studied in most previous work, including agents moving in 3D environments such as terrains, multi-story buildings, and dynamic environments. We also support more realistic three-dimensional visibility computations that allow evading agents to hide in crowds or behind hills. We demonstrate the utility of this approach on mobile robots and in simulation for a variety of scenarios including pursuit-evasion and tag on terrains, in multi-level buildings, and in crowds. © 2011 IEEE.

Entrepreneurial Education: A Realistic Alternative for Women and Minorities.

Science.gov (United States)

Steward, James F.; Boyd, Daniel R.

1989-01-01

Entrepreneurial education is a valid, realistic occupational training alternative for minorities and women in business. Entrepreneurship requires that one become involved with those educational programs that contribute significantly to one's success. (Author)

Protocol - realist and meta-narrative evidence synthesis: Evolving Standards (RAMESES

Directory of Open Access Journals (Sweden)

Westhorp Gill

2011-08-01

Full Text Available Abstract Background There is growing interest in theory-driven, qualitative and mixed-method approaches to systematic review as an alternative to (or to extend and supplement conventional Cochrane-style reviews. These approaches offer the potential to expand the knowledge base in policy-relevant areas - for example by explaining the success, failure or mixed fortunes of complex interventions. However, the quality of such reviews can be difficult to assess. This study aims to produce methodological guidance, publication standards and training resources for those seeking to use the realist and/or meta-narrative approach to systematic review. Methods/design We will: [a] collate and summarise existing literature on the principles of good practice in realist and meta-narrative systematic review; [b] consider the extent to which these principles have been followed by published and in-progress reviews, thereby identifying how rigour may be lost and how existing methods could be improved; [c] using an online Delphi method with an interdisciplinary panel of experts from academia and policy, produce a draft set of methodological steps and publication standards; [d] produce training materials with learning outcomes linked to these steps; [e] pilot these standards and training materials prospectively on real reviews-in-progress, capturing methodological and other challenges as they arise; [f] synthesise expert input, evidence review and real-time problem analysis into more definitive guidance and standards; [g] disseminate outputs to audiences in academia and policy. The outputs of the study will be threefold: 1. Quality standards and methodological guidance for realist and meta-narrative reviews for use by researchers, research sponsors, students and supervisors 2. A 'RAMESES' (Realist and Meta-review Evidence Synthesis: Evolving Standards statement (comparable to CONSORT or PRISMA of publication standards for such reviews, published in an open

Latter-day Mother Irelands: The Role of Women in Michael Collins and The Wind that Shakes the Barley

Directory of Open Access Journals (Sweden)

Pilar Villar-Argáiz

2007-03-01

Full Text Available Despite the experimental and subversive work of Irish feminist filmmakers such as Pat Murphy and Margo Harkin in the 1980s, as Gerardine Meaney has contended, “the image of woman as Ireland, Ireland as woman, remains powerful and pervasive in the new Irish cinema” (1998: 250. The cinematic convention of representing Ireland through female characters becomes particularly relevant in two recent Irish historical films: Michael Collins (1996, directed and written by Irish Neil Jordan, and The Wind that Shakes the Barley (2006, written by Scottish Paul Laverty and directed by English Ken Loach. In their dealing with themes such as military occupation, colonisation and the heated debate about the Treaty, both films maintain the nationalist rhetoric that represents Ireland as a woman/mother in a direct manner. Over the course of this essay, I shall try to chart the implications of both films’ representations of women, with a view to demonstrating how, even at present, the trope of Mother Ireland continues to be deep in the national unconscious.

Principles of maximally classical and maximally realistic quantum ...

Indian Academy of Sciences (India)

Principles of maximally classical and maximally realistic quantum mechanics. S M ROY. Tata Institute of Fundamental Research, Homi Bhabha Road, Mumbai 400 005, India. Abstract. Recently Auberson, Mahoux, Roy and Singh have proved a long standing conjecture of Roy and Singh: In 2N-dimensional phase space, ...

Toward the M(F)--Theory Embedding of Realistic Free-Fermion Models

CERN Document Server

Berglund, P; Faraggi, A E; Nanopoulos, Dimitri V; Qiu, Z; Berglund, Per; Ellis, John; Faraggi, Alon E.; Qiu, Zongan

1998-01-01

We construct a Landau-Ginzburg model with the same data and symmetries as a $Z_2\\times Z_2$ orbifold that corresponds to a class of realistic free-fermion models. Within the class of interest, we show that this orbifolding connects between different $Z_2\\times Z_2$ orbifold models and commutes with the mirror symmetry. Our work suggests that duality symmetries previously discussed in the context of specific $M$ and $F$ theory compactifications may be extended to the special $Z_2\\times Z_2$ orbifold that characterizes realistic free-fermion models.

Ultra-realistic imaging advanced techniques in analogue and digital colour holography

CERN Document Server

Bjelkhagen, Hans

2013-01-01

Ultra-high resolution holograms are now finding commercial and industrial applications in such areas as holographic maps, 3D medical imaging, and consumer devices. Ultra-Realistic Imaging: Advanced Techniques in Analogue and Digital Colour Holography brings together a comprehensive discussion of key methods that enable holography to be used as a technique of ultra-realistic imaging.After a historical review of progress in holography, the book: Discusses CW recording lasers, pulsed holography lasers, and reviews optical designs for many of the principal laser types with emphasis on attaining th

Computer-assisted midface reconstruction in Treacher Collins syndrome part 1: skeletal reconstruction.

Science.gov (United States)

Herlin, Christian; Doucet, Jean Charles; Bigorre, Michèle; Khelifa, Hatem Cheikh; Captier, Guillaume

2013-10-01

Treacher Collins syndrome (TCS) is a severe and complex craniofacial malformation affecting the facial skeleton and soft tissues. The palate as well as the external and middle ear are also affected, but his prognosis is mainly related to neonatal airway management. Methods of zygomatico-orbital reconstruction are numerous and currently use primarily autologous bone, lyophilized cartilage, alloplastic implants, or even free flaps. This work developed a reliable "customized" method of zygomatico-orbital bony reconstruction using a generic reference model tailored to each patient. From a standard computed tomography (CT) acquisition, we studied qualitatively and quantitatively the skeleton of four individuals with TCS whose age was between 6 and 20 years. In parallel, we studied 40 controls at the same age to obtain a morphometric database of reference. Surgical simulation was carried out using validated software used in craniofacial surgery. The zygomatic hypoplasia was very important quantitatively and morphologically in all TCS individuals. Orbital involvement was mainly morphological, with volumes comparable to the controls of the same age. The control database was used to create three-dimensional computer models to be used in the manufacture of cutting guides for autologous cranial bone grafts or alloplastic implants perfectly adapted to each patient's morphology. Presurgical simulation was also used to fabricate custom positioning guides permitting a simple and reliable surgical procedure. The use of a virtual database allowed us to design a reliable and reproducible skeletal reconstruction method for this rare and complex syndrome. The use of presurgical simulation tools seem essential in this type of craniofacial malformation to increase the reliability of these uncommon and complex surgical procedures, and to ensure stable results over time. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights

Using a Realist Research Methodology in Policy Analysis

Science.gov (United States)

Lourie, Megan; Rata, Elizabeth

2017-01-01

The article describes the usefulness of a realist methodology in linking sociological theory to empirically obtained data through the development of a methodological device. Three layers of analysis were integrated: 1. the findings from a case study about Maori language education in New Zealand; 2. the identification and analysis of contradictions…

Martínez Sanabria en un país de artesanos

OpenAIRE

Jimena Montaña Cuéllar

2011-01-01

De la arquitectura orgánica a la arquitectura del lugar en las casas Wilkie (1962) y Calderón (1963) de Fernando Martínez Sanabria. Germán Darío Rodríguez Botero. Universidad Nacional de Colombia (Sede Bogotá), Facultad de Artes, Colección Punto aparte, Bogotá, 2007, 232 págs.

Realistic electricity market simulator for energy and economic studies

International Nuclear Information System (INIS)

Bernal-Agustin, Jose L.; Contreras, Javier; Conejo, Antonio J.; Martin-Flores, Raul

2007-01-01

Electricity market simulators have become a useful tool to train engineers in the power industry. With the maturing of electricity markets throughout the world, there is a need for sophisticated software tools that can replicate the actual behavior of power markets. In most of these markets, power producers/consumers submit production/demand bids and the Market Operator clears the market producing a single price per hour. What makes markets different from each other are the bidding rules and the clearing algorithms to balance the market. This paper presents a realistic simulator of the day-ahead electricity market of mainland Spain. All the rules that govern this market are modeled. This simulator can be used either to train employees by power companies or to teach electricity markets courses in universities. To illustrate the tool, several realistic case studies are presented and discussed. (author)

Fully Realistic Multi-Criteria Multi-Modal Routing

OpenAIRE

Gündling, Felix; Keyhani, Mohammad Hossein; Schnee, Mathias; Weihe, Karsten

2014-01-01

We report on a multi-criteria search system, in which the German long- and short-distance trains, local public transport, walking, private car, private bike, and taxi are incorporated. The system is fully realistic. Three optimization criteria are addressed: travel time, travel cost, and convenience. Our algorithmic approach computes a complete Pareto set of reasonable connections. The computational study demonstrates that, even in such a large-scale, highly complex scenario, approp...

Quantifying introgression risk with realistic population genetics

OpenAIRE

Ghosh, Atiyo; Meirmans, Patrick G.; Haccou, Patsy

2012-01-01

Introgression is the permanent incorporation of genes from the genome of one population into another. This can have severe consequences, such as extinction of endemic species, or the spread of transgenes. Quantification of the risk of introgression is an important component of genetically modified crop regulation. Most theoretical introgression studies aimed at such quantification disregard one or more of the most important factors concerning introgression: realistic genetical mechanisms, rep...

Quantum cryptography: towards realization in realistic conditions

International Nuclear Information System (INIS)

Imoto, M.; Koashi, M.; Shimizu, K.; Huttner, B.

1997-01-01

Many of quantum cryptography schemes have been proposed based on some assumptions such as no transmission loss, no measurement error, and an ideal single photon generator. We have been trying to develop a theory of quantum cryptography considering realistic conditions. As such attempts, we propose quantum cryptography with coherent states, quantum cryptography with two-photon interference, and generalization of two-state cryptography to two-mixed-state cases. (author)

A possible definition of a {\\it Realistic} Physics Theory

OpenAIRE

Gisin, Nicolas

2014-01-01

A definition of a {\\it Realistic} Physics Theory is proposed based on the idea that, at all time, the set of physical properties possessed (at that time) by a system should unequivocally determine the probabilities of outcomes of all possible measurements.

Numerical computation of aeroacoustic transfer functions for realistic airfoils

NARCIS (Netherlands)

De Santana, Leandro Dantas; Miotto, Renato Fuzaro; Wolf, William Roberto

2017-01-01

Based on Amiet's theory formalism, we propose a numerical framework to compute the aeroacoustic transfer function of realistic airfoil geometries. The aeroacoustic transfer function relates the amplitude and phase of an incoming periodic gust to the respective unsteady lift response permitting,

Student Work Experience: A Realistic Approach to Merchandising Education.

Science.gov (United States)

Horridge, Patricia; And Others

1980-01-01

Relevant and realistic experiences are needed to prepare the student for a future career. Addresses the results of a survey of colleges and universities in the United States in regard to their student work experience (SWE) in fashion merchandising. (Author)

Generalized Warburg impedance on realistic self-affine fractals ...

Indian Academy of Sciences (India)

Administrator

Generalized Warburg impedance on realistic self-affine fractals: Comparative study of statistically corrugated and isotropic roughness. RAJESH KUMAR and RAMA KANT. Journal of Chemical Sciences, Vol. 121, No. 5, September 2009, pp. 579–588. 1. ( ) c. L. R ω on page 582, column 2, para 2, after eq (8) should read as ...

Scaling up complex interventions: insights from a realist synthesis.

Science.gov (United States)

Willis, Cameron D; Riley, Barbara L; Stockton, Lisa; Abramowicz, Aneta; Zummach, Dana; Wong, Geoff; Robinson, Kerry L; Best, Allan

2016-12-19

Preventing chronic diseases, such as cancer, cardiovascular disease and diabetes, requires complex interventions, involving multi-component and multi-level efforts that are tailored to the contexts in which they are delivered. Despite an increasing number of complex interventions in public health, many fail to be 'scaled up'. This study aimed to increase understanding of how and under what conditions complex public health interventions may be scaled up to benefit more people and populations.A realist synthesis was conducted and discussed at an in-person workshop involving practitioners responsible for scaling up activities. Realist approaches view causality through the linkages between changes in contexts (C) that activate mechanisms (M), leading to specific outcomes (O) (CMO configurations). To focus this review, three cases of complex interventions that had been successfully scaled up were included: Vibrant Communities, Youth Build USA and Pathways to Education. A search strategy of published and grey literature related to each case was developed, involving searches of relevant databases and nominations from experts. Data extracted from included documents were classified according to CMO configurations within strategic themes. Findings were compared and contrasted with guidance from diffusion theory, and interpreted with knowledge users to identify practical implications and potential directions for future research.Four core mechanisms were identified, namely awareness, commitment, confidence and trust. These mechanisms were activated within two broad scaling up strategies, those of renewing and regenerating, and documenting success. Within each strategy, specific actions to change contexts included building partnerships, conducting evaluations, engaging political support and adapting funding models. These modified contexts triggered the identified mechanisms, leading to a range of scaling up outcomes, such as commitment of new communities, changes in relevant

Building Realistic Mobility Models for Mobile Ad Hoc Networks

Directory of Open Access Journals (Sweden)

Adrian Pullin

2018-04-01

Full Text Available A mobile ad hoc network (MANET is a self-configuring wireless network in which each node could act as a router, as well as a data source or sink. Its application areas include battlefields and vehicular and disaster areas. Many techniques applied to infrastructure-based networks are less effective in MANETs, with routing being a particular challenge. This paper presents a rigorous study into simulation techniques for evaluating routing solutions for MANETs with the aim of producing more realistic simulation models and thereby, more accurate protocol evaluations. MANET simulations require models that reflect the world in which the MANET is to operate. Much of the published research uses movement models, such as the random waypoint (RWP model, with arbitrary world sizes and node counts. This paper presents a technique for developing more realistic simulation models to test and evaluate MANET protocols. The technique is animation, which is applied to a realistic scenario to produce a model that accurately reflects the size and shape of the world, node count, movement patterns, and time period over which the MANET may operate. The animation technique has been used to develop a battlefield model based on established military tactics. Trace data has been used to build a model of maritime movements in the Irish Sea. Similar world models have been built using the random waypoint movement model for comparison. All models have been built using the ns-2 simulator. These models have been used to compare the performance of three routing protocols: dynamic source routing (DSR, destination-sequenced distance-vector routing (DSDV, and ad hoc n-demand distance vector routing (AODV. The findings reveal that protocol performance is dependent on the model used. In particular, it is shown that RWP models do not reflect the performance of these protocols under realistic circumstances, and protocol selection is subject to the scenario to which it is applied. To

Non realist tendencies in new Turkish cinema

OpenAIRE

Can, İclal

2016-01-01

http://hdl.handle.net/11693/29111 Thesis (M.S.): Bilkent University, Department of Communication and Design, İhsan Doğramacı Bilkent University, 2016. Includes bibliographical references (leaves 113-123). The realist tendency which had been dominant in cinema became more apparent with Italian neorealism affecting other national cinemas to a large extent. With the changing and developing socio economic and cultural dynamics, realism gradually has stopped being a natural const...

Security of quantum cryptography with realistic sources

International Nuclear Information System (INIS)

Lutkenhaus, N.

1999-01-01

The interest in practical implementations of quantum key distribution is steadily growing. However, there is still a need to give a precise security statement which adapts to realistic implementation. In this paper I give the effective key rate we can obtain in a practical setting within scenario of security against individual attacks by an eavesdropper. It illustrates previous results that high losses together with detector dark counts can make secure quantum key distribution impossible. (Author)

Quantum cryptography: towards realization in realistic conditions

Energy Technology Data Exchange (ETDEWEB)

Imoto, M; Koashi, M; Shimizu, K [NTT Basic Research Laboratories, 3-1 Morinosato-Wakamiya, Atsugi-shi, Kanagawa 243-01 (Japan); Huttner, B [Universite de Geneve, GAP-optique, 20, Rue de l` Ecole de Medecine CH1211, Geneve 4 (Switzerland)

1997-05-11

Many of quantum cryptography schemes have been proposed based on some assumptions such as no transmission loss, no measurement error, and an ideal single photon generator. We have been trying to develop a theory of quantum cryptography considering realistic conditions. As such attempts, we propose quantum cryptography with coherent states, quantum cryptography with two-photon interference, and generalization of two-state cryptography to two-mixed-state cases. (author) 15 refs., 1 fig., 1 tab.

Security of quantum cryptography with realistic sources

Energy Technology Data Exchange (ETDEWEB)

Lutkenhaus, N [Helsinki Institute of Physics, P.O. Box 9, 00014 Helsingin yliopisto (Finland)

1999-08-01

The interest in practical implementations of quantum key distribution is steadily growing. However, there is still a need to give a precise security statement which adapts to realistic implementation. In this paper I give the effective key rate we can obtain in a practical setting within scenario of security against individual attacks by an eavesdropper. It illustrates previous results that high losses together with detector dark counts can make secure quantum key distribution impossible. (Author)

Rethinking Mathematics Teaching in Liberia: Realistic Mathematics Education

Science.gov (United States)

Stemn, Blidi S.

2017-01-01

In some African cultures, the concept of division does not necessarily mean sharing money or an item equally. How an item is shared might depend on the ages of the individuals involved. This article describes the use of the Realistic Mathematics Education (RME) approach to teach division word problems involving money in a 3rd-grade class in…

Realistic full wave modeling of focal plane array pixels.

Energy Technology Data Exchange (ETDEWEB)

Campione, Salvatore [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States). Electromagnetic Theory Dept.; Warne, Larry K. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States). Electromagnetic Theory Dept.; Jorgenson, Roy E. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States). Electromagnetic Theory Dept.; Davids, Paul [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States). Applied Photonic Microsystems Dept.; Peters, David W. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States). Applied Photonic Microsystems Dept.

2017-11-01

Here, we investigate full-wave simulations of realistic implementations of multifunctional nanoantenna enabled detectors (NEDs). We focus on a 2x2 pixelated array structure that supports two wavelengths of operation. We design each resonating structure independently using full-wave simulations with periodic boundary conditions mimicking the whole infinite array. We then construct a supercell made of a 2x2 pixelated array with periodic boundary conditions mimicking the full NED; in this case, however, each pixel comprises 10-20 antennas per side. In this way, the cross-talk between contiguous pixels is accounted for in our simulations. We observe that, even though there are finite extent effects, the pixels work as designed, each responding at the respective wavelength of operation. This allows us to stress that realistic simulations of multifunctional NEDs need to be performed to verify the design functionality by taking into account finite extent and cross-talk effects.

Facilities upgrade for natural forces: traditional vs. realistic approach

International Nuclear Information System (INIS)

Terkun, V.

1985-01-01

The traditional method utilized for upgrading existing buildings and equipment involves the following steps: performs structural study using finite element analysis and some in situ testing; compare predicted member forces/stresses to material code allowables; determine strengthening schemes for those structural members judged to be weak; estimate cost for required upgrades. This approach will result in structural modifications that are not only conservative but very expensive as well. The realistic structural evaluation approach uses traditional data to predict structural weaknesses as a final step. Next, using considerable information now available for buildings and equipment exposed to natural hazards, engineering judgments about structures being evaluated can be made with a great deal of confidence. This approach does not eliminate conservatism entirely, but it does reduce it to a reasonable and realistic level. As a result, the upgrade cost goes down without compromising the low risk necessary for vital facilities

Gauge coupling unification in realistic free-fermionic string models

International Nuclear Information System (INIS)

Dienes, K.R.; Faraggi, A.E.

1995-01-01

We discuss the unification of gauge couplings within the framework of a wide class of realistic free-fermionic string models which have appeared in the literature, including the flipped SU(5), SO(6)xSO(4), and various SU(3)xSU(2)xU(1) models. If the matter spectrum below the string scale is that of the Minimal Supersymmetric Standard Model (MSSM), then string unification is in disagreement with experiment. We therefore examine several effects that may modify the minimal string predictions. First, we develop a systematic procedure for evaluating the one-loop heavy string threshold corrections in free-fermionic string models, and we explicitly evaluate these corrections for each of the realistic models. We find that these string threshold corrections are small, and we provide general arguments explaining why such threshold corrections are suppressed in string theory. Thus heavy thresholds cannot resolve the disagreement with experiment. We also study the effect of non-standard hypercharge normalizations, light SUSY thresholds, and intermediate-scale gauge structure, and similarly conclude that these effects cannot resolve the disagreement with low-energy data. Finally, we examine the effects of additional color triplets and electroweak doublets beyond the MSSM. Although not required in ordinary grand unification scenarios, such states generically appear within the context of certain realistic free-fermionic string models. We show that if these states exist at the appropriate thresholds, then the gauge couplings will indeed unify at the string scale. Thus, within these string models, string unification can be in agreement with low-energy data. (orig.)

The Electrostatic Instability for Realistic Pair Distributions in Blazar/EBL Cascades

Science.gov (United States)

Vafin, S.; Rafighi, I.; Pohl, M.; Niemiec, J.

2018-04-01

This work revisits the electrostatic instability for blazar-induced pair beams propagating through the intergalactic medium (IGM) using linear analysis and PIC simulations. We study the impact of the realistic distribution function of pairs resulting from the interaction of high-energy gamma-rays with the extragalactic background light. We present analytical and numerical calculations of the linear growth rate of the instability for the arbitrary orientation of wave vectors. Our results explicitly demonstrate that the finite angular spread of the beam dramatically affects the growth rate of the waves, leading to the fastest growth for wave vectors quasi-parallel to the beam direction and a growth rate at oblique directions that is only a factor of 2–4 smaller compared to the maximum. To study the nonlinear beam relaxation, we performed PIC simulations that take into account a realistic wide-energy distribution of beam particles. The parameters of the simulated beam-plasma system provide an adequate physical picture that can be extrapolated to realistic blazar-induced pairs. In our simulations, the beam looses only 1% of its energy, and we analytically estimate that the beam would lose its total energy over about 100 simulation times. An analytical scaling is then used to extrapolate the parameters of realistic blazar-induced pair beams. We find that they can dissipate their energy slightly faster by the electrostatic instability than through inverse-Compton scattering. The uncertainties arising from, e.g., details of the primary gamma-ray spectrum are too large to make firm statements for individual blazars, and an analysis based on their specific properties is required.

Measurable realistic image-based 3D mapping

Science.gov (United States)

Liu, W.; Wang, J.; Wang, J. J.; Ding, W.; Almagbile, A.

2011-12-01

Maps with 3D visual models are becoming a remarkable feature of 3D map services. High-resolution image data is obtained for the construction of 3D visualized models.The3D map not only provides the capabilities of 3D measurements and knowledge mining, but also provides the virtual experienceof places of interest, such as demonstrated in the Google Earth. Applications of 3D maps are expanding into the areas of architecture, property management, and urban environment monitoring. However, the reconstruction of high quality 3D models is time consuming, and requires robust hardware and powerful software to handle the enormous amount of data. This is especially for automatic implementation of 3D models and the representation of complicated surfacesthat still need improvements with in the visualisation techniques. The shortcoming of 3D model-based maps is the limitation of detailed coverage since a user can only view and measure objects that are already modelled in the virtual environment. This paper proposes and demonstrates a 3D map concept that is realistic and image-based, that enables geometric measurements and geo-location services. Additionally, image-based 3D maps provide more detailed information of the real world than 3D model-based maps. The image-based 3D maps use geo-referenced stereo images or panoramic images. The geometric relationships between objects in the images can be resolved from the geometric model of stereo images. The panoramic function makes 3D maps more interactive with users but also creates an interesting immersive circumstance. Actually, unmeasurable image-based 3D maps already exist, such as Google street view, but only provide virtual experiences in terms of photos. The topographic and terrain attributes, such as shapes and heights though are omitted. This paper also discusses the potential for using a low cost land Mobile Mapping System (MMS) to implement realistic image 3D mapping, and evaluates the positioning accuracy that a measureable

Neutron dosemeter responses in workplace fields and the implications of using realistic neutron calibration fields

International Nuclear Information System (INIS)

Thomas, D.J.; Horwood, N.; Taylor, G.C.

1999-01-01

The use of realistic neutron calibration fields to overcome some of the problems associated with the response functions of presently available dosemeters, both area survey instruments and personal dosemeters, has been investigated. Realistic calibration fields have spectra which, compared to conventional radionuclide source based calibration fields, more closely match those of the workplace fields in which dosemeters are used. Monte Carlo simulations were performed to identify laboratory systems which would produce appropriate workplace-like calibration fields. A detailed analysis was then undertaken of the predicted under- and over-responses of dosemeters in a wide selection of measured workplace field spectra assuming calibration in a selection of calibration fields. These included both conventional radionuclide source calibration fields, and also several proposed realistic calibration fields. The present state of the art for dosemeter performance, and the possibilities of improving accuracy by using realistic calibration fields are both presented. (author)

International Management: Creating a More Realistic Global Planning Environment.

Science.gov (United States)

Waldron, Darryl G.

2000-01-01

Discusses the need for realistic global planning environments in international business education, introducing a strategic planning model that has teams interacting with teams to strategically analyze a selected multinational company. This dynamic process must result in a single integrated written analysis that specifies an optimal strategy for…

Ultra-realistic 3-D imaging based on colour holography

International Nuclear Information System (INIS)

Bjelkhagen, H I

2013-01-01

A review of recent progress in colour holography is provided with new applications. Colour holography recording techniques in silver-halide emulsions are discussed. Both analogue, mainly Denisyuk colour holograms, and digitally-printed colour holograms are described and their recent improvements. An alternative to silver-halide materials are the panchromatic photopolymer materials such as the DuPont and Bayer photopolymers which are covered. The light sources used to illuminate the recorded holograms are very important to obtain ultra-realistic 3-D images. In particular the new light sources based on RGB LEDs are described. They show improved image quality over today's commonly used halogen lights. Recent work in colour holography by holographers and companies in different countries around the world are included. To record and display ultra-realistic 3-D images with perfect colour rendering are highly dependent on the correct recording technique using the optimal recording laser wavelengths, the availability of improved panchromatic recording materials and combined with new display light sources.

Understanding how appraisal of doctors produces its effects: a realist review protocol.

Science.gov (United States)

Brennan, Nicola; Bryce, Marie; Pearson, Mark; Wong, Geoff; Cooper, Chris; Archer, Julian

2014-06-23

UK doctors are now required to participate in revalidation to maintain their licence to practise. Appraisal is a fundamental component of revalidation. However, objective evidence of appraisal changing doctors' behaviour and directly resulting in improved patient care is limited. In particular, it is not clear how the process of appraisal is supposed to change doctors' behaviour and improve clinical performance. The aim of this research is to understand how and why appraisal of doctors is supposed to produce its effect. Realist review is a theory-driven interpretive approach to evidence synthesis. It applies realist logic of inquiry to produce an explanatory analysis of an intervention that is, what works, for whom, in what circumstances, in what respects. Using a realist review approach, an initial programme theory of appraisal will be developed by consulting with key stakeholders in doctors' appraisal in expert panels (ethical approval is not required), and by searching the literature to identify relevant existing theories. The search strategy will have a number of phases including a combination of: (1) electronic database searching, for example, EMBASE, MEDLINE, the Cochrane Library, ASSIA, (2) 'cited by' articles search, (3) citation searching, (4) contacting authors and (5) grey literature searching. The search for evidence will be iteratively extended and refocused as the review progresses. Studies will be included based on their ability to provide data that enable testing of the programme theory. Data extraction will be conducted, for example, by note taking and annotation at different review stages as is consistent with the realist approach. The evidence will be synthesised using realist logic to interrogate the final programme theory of the impact of appraisal on doctors' performance. The synthesis results will be written up according to RAMESES guidelines and disseminated through peer-reviewed publication and presentations. The protocol is registered with

Improving Mathematics Teaching in Kindergarten with Realistic Mathematical Education

Science.gov (United States)

Papadakis, Stamatios; Kalogiannakis, Michail; Zaranis, Nicholas

2017-01-01

The present study investigates and compares the influence of teaching Realistic Mathematics on the development of mathematical competence in kindergarten. The sample consisted of 231 Greek kindergarten students. For the implementation of the survey, we conducted an intervention, which included one experimental and one control group. Children in…

Development of realistic thermal hydraulic system analysis code

Energy Technology Data Exchange (ETDEWEB)

Lee, Won Jae; Chung, B. D; Kim, K. D. [and others

2002-05-01

The realistic safety analysis system is essential for nuclear safety research, advanced reactor development, safety analysis in nuclear industry and 'in-house' plant design capability development. In this project, we have developed a best-estimate multi-dimensional thermal-hydraulic system code, MARS, which is based on the integrated version of the RELAP5 and COBRA-TF codes. To improve the realistic analysis capability, we have improved the models for multi-dimensional two-phase flow phenomena and for advanced two-phase flow modeling. In addition, the GUI (Graphic User Interface) feature were developed to enhance the user's convenience. To develop the coupled analysis capability, the MARS code were linked with the three-dimensional reactor kinetics code (MASTER), the core thermal analysis code (COBRA-III/CP), and the best-estimate containment analysis code (CONTEMPT), resulting in MARS/MASTER/COBRA/CONTEMPT. Currently, the MARS code system has been distributed to 18 domestic organizations, including research, industrial, regulatory organizations and universities. The MARS has been being widely used for the safety research of existing PWRs, advanced PWR, CANDU and research reactor, the pre-test analysis of TH experiments, and others.

Development of realistic thermal hydraulic system analysis code

International Nuclear Information System (INIS)

Lee, Won Jae; Chung, B. D; Kim, K. D.

2002-05-01

The realistic safety analysis system is essential for nuclear safety research, advanced reactor development, safety analysis in nuclear industry and 'in-house' plant design capability development. In this project, we have developed a best-estimate multi-dimensional thermal-hydraulic system code, MARS, which is based on the integrated version of the RELAP5 and COBRA-TF codes. To improve the realistic analysis capability, we have improved the models for multi-dimensional two-phase flow phenomena and for advanced two-phase flow modeling. In addition, the GUI (Graphic User Interface) feature were developed to enhance the user's convenience. To develop the coupled analysis capability, the MARS code were linked with the three-dimensional reactor kinetics code (MASTER), the core thermal analysis code (COBRA-III/CP), and the best-estimate containment analysis code (CONTEMPT), resulting in MARS/MASTER/COBRA/CONTEMPT. Currently, the MARS code system has been distributed to 18 domestic organizations, including research, industrial, regulatory organizations and universities. The MARS has been being widely used for the safety research of existing PWRs, advanced PWR, CANDU and research reactor, the pre-test analysis of TH experiments, and others

An inexpensive yet realistic model for teaching vasectomy

Directory of Open Access Journals (Sweden)

Taylor M. Coe

2015-04-01

Full Text Available Purpose Teaching the no-scalpel vasectomy is important, since vasectomy is a safe, simple, and cost-effective method of contraception. This minimally invasive vasectomy technique involves delivering the vas through the skin with specialized tools. This technique is associated with fewer complications than the traditional incisional vasectomy (1. One of the most challenging steps is the delivery of the vas through a small puncture in the scrotal skin, and there is a need for a realistic and inexpensive scrotal model for beginning learners to practice this step. Materials and Methods After careful observation using several scrotal models while teaching residents and senior trainees, we developed a simplified scrotal model that uses only three components–bicycle inner tube, latex tubing, and a Penrose drain. Results This model is remarkably realistic and allows learners to practice a challenging step in the no-scalpel vasectomy. The low cost and simple construction of the model allows wide dissemination of training in this important technique. Conclusions We propose a simple, inexpensive model that will enable learners to master the hand movements involved in delivering the vas through the skin while mitigating the risks of learning on patients.

Towards an agential realist concept of learning

DEFF Research Database (Denmark)

Plauborg, Helle

2018-01-01

Drawing on agential realism, this article explores how learning can be understood. An agential realist way of thinking about learning is sensitive to the complexity that characterises learning as a phenomenon. Thus, learning is seen as a dynamic and emergent phenomenon, constantly undergoing...... processes of becoming and expanding the range of components involved in such constitutive processes. With inspiration from Barad’s theorisation of spatiality, temporality and the interdependence of discourse and materiality, this article focuses on timespacemattering and material-discursivity. Concepts...

INDONESIA’S DEATH PENALTY EXECUTION FROM THE REALIST VIEW OF INTERNATIONAL LAW

Directory of Open Access Journals (Sweden)

Alia Azmi

2015-06-01

Full Text Available During the first half of 2015, Indonesia executed fourteen prisoners who had been convicted of smuggling drugs to and from Indonesia. Twelve of them were foreigners. This execution led to withdrawal of the ambassador of Brazil, Netherlands, and Australia, whose citizens are among those executed. Criticism came from around the world, and small number of Indonesians. Most critics cited human rights abuse; and death penalty is against international law. However, the lack of further explanation can make the statement misunderstood. The distinctive nature of international law is one factor that makes death penalty issue is still debatable. Another factor is the inconsistent world’s reaction on human rights issues, showing realistic behavior in international relations. Therefore it is important to understand the nature of international law from the realist perspective of international relations in explaining death penalty in Indonesia. The purpose of this paper is to elaborate Indonesia’s death penalty from the realist perspective of international law. Keywords: realism, international law, international relations, death penalty

IBM parameters derived from realistic shell-model Hamiltonian via Hn-cooling method

International Nuclear Information System (INIS)

Nakada, Hitoshi

1997-01-01

There is a certain influence of non-collective degrees-of-freedom even in lowest-lying states of medium-heavy nuclei. This influence seems to be significant for some of the IBM parameters. In order to take it into account, several renormalization approaches have been applied. It has been shown in the previous studies that the influence of the G-pairs is important, but does not fully account for the fitted values. The influence of the non-collective components may be more serious when we take a realistic effective nucleonic interaction. To incorporate this influence into the IBM parameters, we employ the recently developed H n -cooling method. This method is applied to renormalize the wave functions of the states consisting of the SD-pairs, for the Cr-Fe nuclei. On this ground, the IBM Hamiltonian and transition operators are derived from corresponding realistic shell-model operators, for the Cr-Fe nuclei. Together with some features of the realistic interaction, the effects of the non-SD degrees-of-freedom are presented. (author)

Realist review and synthesis of retention studies for health workers in rural and remote areas

NARCIS (Netherlands)

Dieleman, M.A.; Kane, Sumit; Zwanikken, Prisca A C; Gerretsen, Barend

2011-01-01

This report uses a realist review, which is a theory-based method, to address the questions of “why” and “how” certain rural retention interventions work better in some contexts and fail in others. Through applying a realist perspective to the review of these retention studies, a greater

Realistic Gamow shell model for resonance and continuum in atomic nuclei

Science.gov (United States)

Xu, F. R.; Sun, Z. H.; Wu, Q.; Hu, B. S.; Dai, S. J.

2018-02-01

The Gamow shell model can describe resonance and continuum for atomic nuclei. The model is established in the complex-moment (complex-k) plane of the Berggren coordinates in which bound, resonant and continuum states are treated on equal footing self-consistently. In the present work, the realistic nuclear force, CD Bonn, has been used. We have developed the full \\hat{Q}-box folded-diagram method to derive the realistic effective interaction in the model space which is nondegenerate and contains resonance and continuum channels. The CD-Bonn potential is renormalized using the V low-k method. With choosing 16O as the inert core, we have applied the Gamow shell model to oxygen isotopes.

Realistic tissue visualization using photoacoustic image

Science.gov (United States)

Cho, Seonghee; Managuli, Ravi; Jeon, Seungwan; Kim, Jeesu; Kim, Chulhong

2018-02-01

Visualization methods are very important in biomedical imaging. As a technology that understands life, biomedical imaging has the unique advantage of providing the most intuitive information in the image. This advantage of biomedical imaging can be greatly improved by choosing a special visualization method. This is more complicated in volumetric data. Volume data has the advantage of containing 3D spatial information. Unfortunately, the data itself cannot directly represent the potential value. Because images are always displayed in 2D space, visualization is the key and creates the real value of volume data. However, image processing of 3D data requires complicated algorithms for visualization and high computational burden. Therefore, specialized algorithms and computing optimization are important issues in volume data. Photoacoustic-imaging is a unique imaging modality that can visualize the optical properties of deep tissue. Because the color of the organism is mainly determined by its light absorbing component, photoacoustic data can provide color information of tissue, which is closer to real tissue color. In this research, we developed realistic tissue visualization using acoustic-resolution photoacoustic volume data. To achieve realistic visualization, we designed specialized color transfer function, which depends on the depth of the tissue from the skin. We used direct ray casting method and processed color during computing shader parameter. In the rendering results, we succeeded in obtaining similar texture results from photoacoustic data. The surface reflected rays were visualized in white, and the reflected color from the deep tissue was visualized red like skin tissue. We also implemented the CUDA algorithm in an OpenGL environment for real-time interactive imaging.

MetAssimulo:Simulation of Realistic NMR Metabolic Profiles

Directory of Open Access Journals (Sweden)

De Iorio Maria

2010-10-01

Full Text Available Abstract Background Probing the complex fusion of genetic and environmental interactions, metabolic profiling (or metabolomics/metabonomics, the study of small molecules involved in metabolic reactions, is a rapidly expanding 'omics' field. A major technique for capturing metabolite data is 1H-NMR spectroscopy and this yields highly complex profiles that require sophisticated statistical analysis methods. However, experimental data is difficult to control and expensive to obtain. Thus data simulation is a productive route to aid algorithm development. Results MetAssimulo is a MATLAB-based package that has been developed to simulate 1H-NMR spectra of complex mixtures such as metabolic profiles. Drawing data from a metabolite standard spectral database in conjunction with concentration information input by the user or constructed automatically from the Human Metabolome Database, MetAssimulo is able to create realistic metabolic profiles containing large numbers of metabolites with a range of user-defined properties. Current features include the simulation of two groups ('case' and 'control' specified by means and standard deviations of concentrations for each metabolite. The software enables addition of spectral noise with a realistic autocorrelation structure at user controllable levels. A crucial feature of the algorithm is its ability to simulate both intra- and inter-metabolite correlations, the analysis of which is fundamental to many techniques in the field. Further, MetAssimulo is able to simulate shifts in NMR peak positions that result from matrix effects such as pH differences which are often observed in metabolic NMR spectra and pose serious challenges for statistical algorithms. Conclusions No other software is currently able to simulate NMR metabolic profiles with such complexity and flexibility. This paper describes the algorithm behind MetAssimulo and demonstrates how it can be used to simulate realistic NMR metabolic profiles with

Creating a Realistic Context for Team Projects in HCI

NARCIS (Netherlands)

Koppelman, Herman; van Dijk, Betsy

2006-01-01

Team projects are nowadays common practice in HCI education. This paper focuses on the role of clients and users in team projects in introductory HCI courses. In order to provide projects with a realistic context we invite people from industry to serve as clients for the student teams. Some of them

Creating photo-realistic works in a 3D scene using layers styles to create an animation

Science.gov (United States)

Avramescu, A. M.

2015-11-01

Creating realist objects in a 3D scene is not an easy work. We have to be very careful to make the creation very detailed. If we don't know how to make these photo-realistic works, by using the techniques and a good reference photo we can create an amazing amount of detail and realism. For example, in this article there are some of these detailed methods from which we can learn the techniques necessary to make beautiful and realistic objects in a scene. More precisely, in this paper, we present how to create a 3D animated scene, mainly using the Pen Tool and Blending Options. Indeed, this work is based on teaching some simple ways of using the Layer Styles to create some great shadows, lights, textures and a realistic sense of 3 Dimension. The present work involves also showing how some interesting ways of using the illuminating and rendering options can create a realistic effect in a scene. Moreover, this article shows how to create photo realistic 3D models from a digital image. The present work proposes to present how to use Illustrator paths, texturing, basic lighting and rendering, how to apply textures and how to parent the building and objects components. We also propose to use this proposition to recreate smaller details or 3D objects from a 2D image. After a critic art stage, we are able now to present in this paper the architecture of a design method that proposes to create an animation. The aim is to create a conceptual and methodological tutorial to address this issue both scientifically and in practice. This objective also includes proposing, on strong scientific basis, a model that gives the possibility of a better understanding of the techniques necessary to create a realistic animation.

Modeling of ultrasonic wave propagation in composite laminates with realistic discontinuity representation.

Science.gov (United States)

Zelenyak, Andreea-Manuela; Schorer, Nora; Sause, Markus G R

2018-02-01

This paper presents a method for embedding realistic defect geometries of a fiber reinforced material in a finite element modeling environment in order to simulate active ultrasonic inspection. When ultrasonic inspection is used experimentally to investigate the presence of defects in composite materials, the microscopic defect geometry may cause signal characteristics that are difficult to interpret. Hence, modeling of this interaction is key to improve our understanding and way of interpreting the acquired ultrasonic signals. To model the true interaction of the ultrasonic wave field with such defect structures as pores, cracks or delamination, a realistic three dimensional geometry reconstruction is required. We present a 3D-image based reconstruction process which converts computed tomography data in adequate surface representations ready to be embedded for processing with finite element methods. Subsequent modeling using these geometries uses a multi-scale and multi-physics simulation approach which results in quantitative A-Scan ultrasonic signals which can be directly compared with experimental signals. Therefore, besides the properties of the composite material, a full transducer implementation, piezoelectric conversion and simultaneous modeling of the attached circuit is applied. Comparison between simulated and experimental signals provides very good agreement in electrical voltage amplitude and the signal arrival time and thus validates the proposed modeling approach. Simulating ultrasound wave propagation in a medium with a realistic shape of the geometry clearly shows a difference in how the disturbance of the waves takes place and finally allows more realistic modeling of A-scans. Copyright © 2017 Elsevier B.V. All rights reserved.

Associations between speech features and phenotypic severity in Treacher Collins syndrome.

Science.gov (United States)

Asten, Pamela; Akre, Harriet; Persson, Christina

2014-04-28

Treacher Collins syndrome (TCS, OMIM 154500) is a rare congenital disorder of craniofacial development. Characteristic hypoplastic malformations of the ears, zygomatic arch, mandible and pharynx have been described in detail. However, reports on the impact of these malformations on speech are few. Exploring speech features and investigating if speech function is related to phenotypic severity are essential for optimizing follow-up and treatment. Articulation, nasal resonance, voice and intelligibility were examined in 19 individuals (5-74 years, median 34 years) divided into three groups comprising children 5-10 years (n = 4), adolescents 11-18 years (n = 4) and adults 29 years and older (n = 11). A speech composite score (0-6) was calculated to reflect the variability of speech deviations. TCS severity scores of phenotypic expression and total scores of Nordic Orofacial Test-Screening (NOT-S) measuring orofacial dysfunction were used in analyses of correlation with speech characteristics (speech composite scores). Children and adolescents presented with significantly higher speech composite scores (median 4, range 1-6) than adults (median 1, range 0-5). Nearly all children and adolescents (6/8) displayed speech deviations of articulation, nasal resonance and voice, while only three adults were identified with multiple speech aberrations. The variability of speech dysfunction in TCS was exhibited by individual combinations of speech deviations in 13/19 participants. The speech composite scores correlated with TCS severity scores and NOT-S total scores. Speech composite scores higher than 4 were associated with cleft palate. The percent of intelligible words in connected speech was significantly lower in children and adolescents (median 77%, range 31-99) than in adults (98%, range 93-100). Intelligibility of speech among the children was markedly inconsistent and clearly affecting the understandability. Multiple speech deviations were identified in

Realistic page-turning of electronic books

Science.gov (United States)

Fan, Chaoran; Li, Haisheng; Bai, Yannan

2014-01-01

The booming electronic books (e-books), as an extension to the paper book, are popular with readers. Recently, many efforts are put into the realistic page-turning simulation o f e-book to improve its reading experience. This paper presents a new 3D page-turning simulation approach, which employs piecewise time-dependent cylindrical surfaces to describe the turning page and constructs smooth transition method between time-dependent cylinders. The page-turning animation is produced by sequentially mapping the turning page into the cylinders with different radii and positions. Compared to the previous approaches, our method is able to imitate various effects efficiently and obtains more natural animation of turning page.

A realist evaluation of the management of a well-performing regional hospital in Ghana.

Science.gov (United States)

Marchal, Bruno; Dedzo, McDamien; Kegels, Guy

2010-01-25

Realist evaluation offers an interesting approach to evaluation of interventions in complex settings, but has been little applied in health care. We report on a realist case study of a well performing hospital in Ghana and show how such a realist evaluation design can help to overcome the limited external validity of a traditional case study. We developed a realist evaluation framework for hypothesis formulation, data collection, data analysis and synthesis of the findings. Focusing on the role of human resource management in hospital performance, we formulated our hypothesis around the high commitment management concept. Mixed methods were used in data collection, including individual and group interviews, observations and document reviews. We found that the human resource management approach (the actual intervention) included induction of new staff, training and personal development, good communication and information sharing, and decentralised decision-making. We identified 3 additional practices: ensuring optimal physical working conditions, access to top managers and managers' involvement on the work floor. Teamwork, recognition and trust emerged as key elements of the organisational climate. Interviewees reported high levels of organisational commitment. The analysis unearthed perceived organisational support and reciprocity as underlying mechanisms that link the management practices with commitment. Methodologically, we found that realist evaluation can be fruitfully used to develop detailed case studies that analyse how management interventions work and in which conditions. Analysing the links between intervention, mechanism and outcome increases the explaining power, while identification of essential context elements improves the usefulness of the findings for decision-makers in other settings (external validity). We also identified a number of practical difficulties and priorities for further methodological development. This case suggests that a well

A realist evaluation of the management of a well- performing regional hospital in Ghana

Directory of Open Access Journals (Sweden)

Kegels Guy

2010-01-01

Full Text Available Abstract Background Realist evaluation offers an interesting approach to evaluation of interventions in complex settings, but has been little applied in health care. We report on a realist case study of a well performing hospital in Ghana and show how such a realist evaluation design can help to overcome the limited external validity of a traditional case study. Methods We developed a realist evaluation framework for hypothesis formulation, data collection, data analysis and synthesis of the findings. Focusing on the role of human resource management in hospital performance, we formulated our hypothesis around the high commitment management concept. Mixed methods were used in data collection, including individual and group interviews, observations and document reviews. Results We found that the human resource management approach (the actual intervention included induction of new staff, training and personal development, good communication and information sharing, and decentralised decision-making. We identified 3 additional practices: ensuring optimal physical working conditions, access to top managers and managers' involvement on the work floor. Teamwork, recognition and trust emerged as key elements of the organisational climate. Interviewees reported high levels of organisational commitment. The analysis unearthed perceived organisational support and reciprocity as underlying mechanisms that link the management practices with commitment. Methodologically, we found that realist evaluation can be fruitfully used to develop detailed case studies that analyse how management interventions work and in which conditions. Analysing the links between intervention, mechanism and outcome increases the explaining power, while identification of essential context elements improves the usefulness of the findings for decision-makers in other settings (external validity. We also identified a number of practical difficulties and priorities for further

The Effect of Realistic Mathematics Education Approach on Students' Achievement And Attitudes Towards Mathematics

OpenAIRE

Effandi Zakaria; Muzakkir Syamaun

2017-01-01

This study was conducted to determine the effect of Realistic Mathematics Education Approach on mathematics achievement and student attitudes towards mathematics. This study also sought determine the relationship between student achievement and attitudes towards mathematics. This study used a quasi-experimental design conducted on 61 high school students at SMA Unggul Sigli. Students were divided into two groups, the treatment group $(n = 30)$ namely, the Realistic Mathematics Approach group ...

Spectroscopy of light nuclei with realistic NN interaction JISP

International Nuclear Information System (INIS)

Shirokov, A. M.; Vary, J. P.; Mazur, A. I.; Weber, T. A.

2008-01-01

Recent results of our systematic ab initio studies of the spectroscopy of s- and p-shell nuclei in fully microscopic large-scale (up to a few hundred million basis functions) no-core shell-model calculations are presented. A new high-quality realistic nonlocal NN interaction JISP is used. This interaction is obtained in the J-matrix inverse-scattering approach (JISP stands for the J-matrix inverse-scattering potential) and is of the form of a small-rank matrix in the oscillator basis in each of the NN partial waves, providing a very fast convergence in shell-model studies. The current purely two-body JISP model of the nucleon-nucleon interaction JISP16 provides not only an excellent description of two-nucleon data (deuteron properties and np scattering) with χ 2 /datum = 1.05 but also a better description of a wide range of observables (binding energies, spectra, rms radii, quadrupole moments, electromagnetic-transition probabilities, etc.) in all s-and p-shell nuclei than the best modern interaction models combining realistic nucleon-nucleon and three-nucleon interactions.

Realistic shell-model calculations for Sn isotopes

International Nuclear Information System (INIS)

Covello, A.; Andreozzi, F.; Coraggio, L.; Gargano, A.; Porrino, A.

1997-01-01

We report on a shell-model study of the Sn isotopes in which a realistic effective interaction derived from the Paris free nucleon-nucleon potential is employed. The calculations are performed within the framework of the seniority scheme by making use of the chain-calculation method. This provides practically exact solutions while cutting down the amount of computational work required by a standard seniority-truncated calculation. The behavior of the energy of several low-lying states in the isotopes with A ranging from 122 to 130 is presented and compared with the experimental one. (orig.)

MANAJEMEN LABA: PERILAKU MANAJEMEN OPPORTUNISTIC ATAU REALISTIC ?

Directory of Open Access Journals (Sweden)

I Nyoman Wijana Asmara Putra

2011-01-01

Full Text Available Earnings management is a still attractive issue. It is often associatedwith negative behavior conducted by management for its own interest. In fact,it also has different side to be examined. There is another motivation to do so,such as to improve the company’s operation. This literature study aims toreview management motivation of doing earnings management, whetheropportunistic or realistic. What conflict that earnings management brings,what pro and cons about it, what would happen if earnings is not managed,whether the company would be better off or worse off.

Realistic minimum accident source terms - Evaluation, application, and risk acceptance

International Nuclear Information System (INIS)

Angelo, P. L.

2009-01-01

The evaluation, application, and risk acceptance for realistic minimum accident source terms can represent a complex and arduous undertaking. This effort poses a very high impact to design, construction cost, operations and maintenance, and integrated safety over the expected facility lifetime. At the 2005 Nuclear Criticality Safety Division (NCSD) Meeting in Knoxville Tenn., two papers were presented mat summarized the Y-12 effort that reduced the number of criticality accident alarm system (CAAS) detectors originally designed for the new Highly Enriched Uranium Materials Facility (HEUMF) from 258 to an eventual as-built number of 60. Part of that effort relied on determining a realistic minimum accident source term specific to the facility. Since that time, the rationale for an alternate minimum accident has been strengthened by an evaluation process that incorporates realism. A recent update to the HEUMF CAAS technical basis highlights the concepts presented here. (authors)

Realistic diversity loss and variation in soil depth independently affect community-level plant nitrogen use.

Science.gov (United States)

Selmants, Paul C; Zavaleta, Erika S; Wolf, Amelia A

2014-01-01

Numerous experiments have demonstrated that diverse plant communities use nitrogen (N) more completely and efficiently, with implications for how species conservation efforts might influence N cycling and retention in terrestrial ecosystems. However, most such experiments have randomly manipulated species richness and minimized environmental heterogeneity, two design aspects that may reduce applicability to real ecosystems. Here we present results from an experiment directly comparing how realistic and randomized plant species losses affect plant N use across a gradient of soil depth in a native-dominated serpentine grassland in California. We found that the strength of the species richness effect on plant N use did not increase with soil depth in either the realistic or randomized species loss scenarios, indicating that the increased vertical heterogeneity conferred by deeper soils did not lead to greater complementarity among species in this ecosystem. Realistic species losses significantly reduced plant N uptake and altered N-use efficiency, while randomized species losses had no effect on plant N use. Increasing soil depth positively affected plant N uptake in both loss order scenarios but had a weaker effect on plant N use than did realistic species losses. Our results illustrate that realistic species losses can have functional consequences that differ distinctly from randomized losses, and that species diversity effects can be independent of and outweigh those of environmental heterogeneity on ecosystem functioning. Our findings also support the value of conservation efforts aimed at maintaining biodiversity to help buffer ecosystems against increasing anthropogenic N loading.

Nuclear properties with realistic Hamiltonians through spectral distribution theory

International Nuclear Information System (INIS)

Vary, J.P.; Belehrad, R.; Dalton, B.J.

1979-01-01

Motivated by the need of non-perturbative methods for utilizing realistic nuclear Hamiltonians H, the authors use spectral distribution theory, based on calculated moments of H, to obtain specific bulk and valence properties of finite nuclei. The primary emphasis here is to present results for the binding energies of nuclei obtained with and without an assumed core. (Auth.)

Automated Finger Spelling by Highly Realistic 3D Animation

Science.gov (United States)

Adamo-Villani, Nicoletta; Beni, Gerardo

2004-01-01

We present the design of a new 3D animation tool for self-teaching (signing and reading) finger spelling the first basic component in learning any sign language. We have designed a highly realistic hand with natural animation of the finger motions. Smoothness of motion (in real time) is achieved via programmable blending of animation segments. The…

Elements of a realistic 17 GHz FEL/TBA design

International Nuclear Information System (INIS)

Hopkins, D.B.; Halbach, K.; Hoyer, E.H.; Sessler, A.M.; Sternbach, E.J.

1989-01-01

Recently, renewed interest in an FEL version of a two-beam accelerator (TBA) has prompted a study of practical system and structure designs for achieving the specified physics goals. This paper presents elements of a realistic design for an FEL/TBA suitable for a 1 TeV, 17 GHz linear collider. 13 refs., 8 figs., 2 tabs

Realistic-contact-induced enhancement of rectifying in carbon-nanotube/graphene-nanoribbon junctions

International Nuclear Information System (INIS)

Zhang, Xiang-Hua; Li, Xiao-Fei; Wang, Ling-Ling; Xu, Liang; Luo, Kai-Wu

2014-01-01

Carbon-nanotube/graphene-nanoribbon junctions were recently fabricated by the controllable etching of single-walled carbon-nanotubes [Wei et al., Nat. Commun. 4, 1374 (2013)] and their electronic transport properties were studied here. First principles results reveal that the transmission function of the junctions show a heavy dependence on the shape of contacts, but rectifying is an inherent property which is insensitive to the details of contacts. Interestingly, the rectifying ratio is largely enhanced in the junction with a realistic contact and the enhancement is insensitive to the details of contact structures. The stability of rectifying suggests a significant feasibility to manufacture realistic all-carbon rectifiers in nanoelectronics

Evaluation of Highly Realistic Training for Independent Duty Corpsmen Students

Science.gov (United States)

2015-05-21

that he or she can perform desired actions or behaviors ( Bandura , 1977). In the present study, three types of self-efficacy were assessed: general...such as resilience. IDC Highly Realistic Training 10 REFERENCES Bandura , A (1977). Self-efficacy: Toward a unifying theory of behavioral

Framing the Real: Lefèbvre and NeoRealist Cinematic Space as Practice

OpenAIRE

Brancaleone, David

2014-01-01

In 1945 Roberto Rossellini's Neo-realist Rome, Open City set in motion an approach to cinema and its representation of real life – and by extension real spaces – that was to have international significance in film theory and practice. However, the re-use of the real spaces of the city, and elsewhere, as film sets in Neo-realist film offered (and offers) more than an influential aesthetic and set of cinematic theories. Through Neo-realism, it can be argued that we gain access to a cinematic re...

Measurement of time delays in gated radiotherapy for realistic respiratory motions

International Nuclear Information System (INIS)

Chugh, Brige P.; Quirk, Sarah; Conroy, Leigh; Smith, Wendy L.

2014-01-01

Purpose: Gated radiotherapy is used to reduce internal motion margins, escalate target dose, and limit normal tissue dose; however, its temporal accuracy is limited. Beam-on and beam-off time delays can lead to treatment inefficiencies and/or geographic misses; therefore, AAPM Task Group 142 recommends verifying the temporal accuracy of gating systems. Many groups use sinusoidal phantom motion for this, under the tacit assumption that use of sinusoidal motion for determining time delays produces negligible error. The authors test this assumption by measuring gating time delays for several realistic motion shapes with increasing degrees of irregularity. Methods: Time delays were measured on a linear accelerator with a real-time position management system (Varian TrueBeam with RPM system version 1.7.5) for seven motion shapes: regular sinusoidal; regular realistic-shape; large (40%) and small (10%) variations in amplitude; large (40%) variations in period; small (10%) variations in both amplitude and period; and baseline drift (30%). Film streaks of radiation exposure were generated for each motion shape using a programmable motion phantom. Beam-on and beam-off time delays were determined from the difference between the expected and observed streak length. Results: For the system investigated, all sine, regular realistic-shape, and slightly irregular amplitude variation motions had beam-off and beam-on time delays within the AAPM recommended limit of less than 100 ms. In phase-based gating, even small variations in period resulted in some time delays greater than 100 ms. Considerable time delays over 1 s were observed with highly irregular motion. Conclusions: Sinusoidal motion shapes can be considered a reasonable approximation to the more complex and slightly irregular shapes of realistic motion. When using phase-based gating with predictive filters even small variations in period can result in time delays over 100 ms. Clinical use of these systems for patients

Measurement of time delays in gated radiotherapy for realistic respiratory motions

Energy Technology Data Exchange (ETDEWEB)

Chugh, Brige P.; Quirk, Sarah; Conroy, Leigh; Smith, Wendy L., E-mail: Wendy.Smith@albertahealthservices.ca [Department of Medical Physics, Tom Baker Cancer Centre, Calgary, Alberta T2N 4N2 (Canada)

2014-09-15

Purpose: Gated radiotherapy is used to reduce internal motion margins, escalate target dose, and limit normal tissue dose; however, its temporal accuracy is limited. Beam-on and beam-off time delays can lead to treatment inefficiencies and/or geographic misses; therefore, AAPM Task Group 142 recommends verifying the temporal accuracy of gating systems. Many groups use sinusoidal phantom motion for this, under the tacit assumption that use of sinusoidal motion for determining time delays produces negligible error. The authors test this assumption by measuring gating time delays for several realistic motion shapes with increasing degrees of irregularity. Methods: Time delays were measured on a linear accelerator with a real-time position management system (Varian TrueBeam with RPM system version 1.7.5) for seven motion shapes: regular sinusoidal; regular realistic-shape; large (40%) and small (10%) variations in amplitude; large (40%) variations in period; small (10%) variations in both amplitude and period; and baseline drift (30%). Film streaks of radiation exposure were generated for each motion shape using a programmable motion phantom. Beam-on and beam-off time delays were determined from the difference between the expected and observed streak length. Results: For the system investigated, all sine, regular realistic-shape, and slightly irregular amplitude variation motions had beam-off and beam-on time delays within the AAPM recommended limit of less than 100 ms. In phase-based gating, even small variations in period resulted in some time delays greater than 100 ms. Considerable time delays over 1 s were observed with highly irregular motion. Conclusions: Sinusoidal motion shapes can be considered a reasonable approximation to the more complex and slightly irregular shapes of realistic motion. When using phase-based gating with predictive filters even small variations in period can result in time delays over 100 ms. Clinical use of these systems for patients

Realistic modeling of chamber transport for heavy-ion fusion

International Nuclear Information System (INIS)

Sharp, W.M.; Grote, D.P.; Callahan, D.A.; Tabak, M.; Henestroza, E.; Yu, S.S.; Peterson, P.F.; Welch, D.R.; Rose, D.V.

2003-01-01

Transport of intense heavy-ion beams to an inertial-fusion target after final focus is simulated here using a realistic computer model. It is found that passing the beam through a rarefied plasma layer before it enters the fusion chamber can largely neutralize the beam space charge and lead to a usable focal spot for a range of ion species and input conditions

Margin improvement initiatives: realistic approaches

Energy Technology Data Exchange (ETDEWEB)

Chan, P.K.; Paquette, S. [Royal Military College of Canada, Chemistry and Chemical Engineering Dept., Kingston, ON (Canada); Cunning, T.A. [Department of National Defence, Ottawa, ON (Canada); French, C.; Bonin, H.W. [Royal Military College of Canada, Chemistry and Chemical Engineering Dept., Kingston, ON (Canada); Pandey, M. [Univ. of Waterloo, Waterloo, ON (Canada); Murchie, M. [Cameco Fuel Manufacturing, Port Hope, ON (Canada)

2014-07-01

With reactor core aging, safety margins are particularly tight. Two realistic and practical approaches are proposed here to recover margins. The first project is related to the use of a small amount of neutron absorbers in CANDU Natural Uranium (NU) fuel bundles. Preliminary results indicate that the fuelling transient and subsequent reactivity peak can be lowered to improve the reactor's operating margins, with minimal impact on burnup when less than 1000 mg of absorbers is added to a fuel bundle. The second project involves the statistical analysis of fuel manufacturing data to demonstrate safety margins. Probability distributions are fitted to actual fuel manufacturing datasets provided by Cameco Fuel Manufacturing, Inc. They are used to generate input for ELESTRES and ELOCA. It is found that the fuel response distributions are far below industrial failure limits, implying that margin exists in the current fuel design. (author)

Towards a Realist Sociology of Education: A Polyphonic Review Essay

Science.gov (United States)

Grenfell, Michael; Hood, Susan; Barrett, Brian D.; Schubert, Dan

2017-01-01

This review essay evaluates Karl Maton's "Knowledge and Knowers: Towards a Realist Sociology of Education" as a recent examination of the sociological causes and effects of education in the tradition of the French social theorist Pierre Bourdieu and the British educational sociologist Basil Bernstein. Maton's book synthesizes the…

Place of a Realistic Teacher Education Pedagogy in an ICT ...

African Journals Online (AJOL)

This article is based on a study undertaken to examine the impact of introducing a realistic teacher education pedagogy (RTEP) oriented learning environment supported by ICT on distance teacher education in Uganda. It gives an overview of the quality, quantity and training of teachers in primary and secondary schools

Electron percolation in realistic models of carbon nanotube networks

International Nuclear Information System (INIS)

Simoneau, Louis-Philippe; Villeneuve, Jérémie; Rochefort, Alain

2015-01-01

The influence of penetrable and curved carbon nanotubes (CNT) on the charge percolation in three-dimensional disordered CNT networks have been studied with Monte-Carlo simulations. By considering carbon nanotubes as solid objects but where the overlap between their electron cloud can be controlled, we observed that the structural characteristics of networks containing lower aspect ratio CNT are highly sensitive to the degree of penetration between crossed nanotubes. Following our efficient strategy to displace CNT to different positions to create more realistic statistical models, we conclude that the connectivity between objects increases with the hard-core/soft-shell radii ratio. In contrast, the presence of curved CNT in the random networks leads to an increasing percolation threshold and to a decreasing electrical conductivity at saturation. The waviness of CNT decreases the effective distance between the nanotube extremities, hence reducing their connectivity and degrading their electrical properties. We present the results of our simulation in terms of thickness of the CNT network from which simple structural parameters such as the volume fraction or the carbon nanotube density can be accurately evaluated with our more realistic models

Electron percolation in realistic models of carbon nanotube networks

Science.gov (United States)

Simoneau, Louis-Philippe; Villeneuve, Jérémie; Rochefort, Alain

2015-09-01

The influence of penetrable and curved carbon nanotubes (CNT) on the charge percolation in three-dimensional disordered CNT networks have been studied with Monte-Carlo simulations. By considering carbon nanotubes as solid objects but where the overlap between their electron cloud can be controlled, we observed that the structural characteristics of networks containing lower aspect ratio CNT are highly sensitive to the degree of penetration between crossed nanotubes. Following our efficient strategy to displace CNT to different positions to create more realistic statistical models, we conclude that the connectivity between objects increases with the hard-core/soft-shell radii ratio. In contrast, the presence of curved CNT in the random networks leads to an increasing percolation threshold and to a decreasing electrical conductivity at saturation. The waviness of CNT decreases the effective distance between the nanotube extremities, hence reducing their connectivity and degrading their electrical properties. We present the results of our simulation in terms of thickness of the CNT network from which simple structural parameters such as the volume fraction or the carbon nanotube density can be accurately evaluated with our more realistic models.

Music therapy for palliative care: A realist review.

Science.gov (United States)

McConnell, Tracey; Porter, Sam

2017-08-01

Music therapy has experienced a rising demand as an adjunct therapy for symptom management among palliative care patients. We conducted a realist review of the literature to develop a greater understanding of how music therapy might benefit palliative care patients and the contextual mechanisms that promote or inhibit its successful implementation. We searched electronic databases (CINAHL, Embase, Medline, and PsychINFO) for literature containing information on music therapy for palliative care. In keeping with the realist approach, we examined all relevant literature to develop theories that could explain how music therapy works. A total of 51 articles were included in the review. Music therapy was found to have a therapeutic effect on the physical, psychological, emotional, and spiritual suffering of palliative care patients. We also identified program mechanisms that help explain music therapy's therapeutic effects, along with facilitating contexts for implementation. Music therapy may be an effective nonpharmacological approach to managing distressing symptoms in palliative care patients. The findings also suggest that group music therapy may be a cost-efficient and effective way to support staff caring for palliative care patients. We encourage others to continue developing the evidence base in order to expand our understanding of how music therapy works, with the aim of informing and improving the provision of music therapy for palliative care patients.

Phenomenology of a realistic accelerating universe using tracker fields

Indian Academy of Sciences (India)

We present a realistic scenario of tracking of scalar fields with varying equation of state. The astrophysical constraints on the evolution of scalar fields in the physical universe are discussed. The nucleosynthesis and the galaxy formation constraints have been used to put limits on and estimate during cosmic evolution.

Empirical Evidence for Niss' "Implemented Anticipation" in Mathematising Realistic Situations

Science.gov (United States)

Stillman, Gloria; Brown, Jill P.

2012-01-01

Mathematisation of realistic situations is an on-going focus of research. Classroom data from a Year 9 class participating in a program of structured modelling of real situations was analysed for evidence of Niss's theoretical construct, implemented anticipation, during mathematisation. Evidence was found for two of three proposed aspects. In…

Rehand: Realistic electric prosthetic hand created with a 3D printer.

Science.gov (United States)

Yoshikawa, Masahiro; Sato, Ryo; Higashihara, Takanori; Ogasawara, Tsukasa; Kawashima, Noritaka

2015-01-01

Myoelectric prosthetic hands provide an appearance with five fingers and a grasping function to forearm amputees. However, they have problems in weight, appearance, and cost. This paper reports on the Rehand, a realistic electric prosthetic hand created with a 3D printer. It provides a realistic appearance that is same as the cosmetic prosthetic hand and a grasping function. A simple link mechanism with one linear actuator for grasping and 3D printed parts achieve low cost, light weight, and ease of maintenance. An operating system based on a distance sensor provides a natural operability equivalent to the myoelectric control system. A supporter socket allows them to wear the prosthetic hand easily. An evaluation using the Southampton Hand Assessment Procedure (SHAP) demonstrated that an amputee was able to operate various objects and do everyday activities with the Rehand.

A scan for models with realistic fermion mass patterns

International Nuclear Information System (INIS)

Bijnens, J.; Wetterich, C.

1986-03-01

We consider models which have no small Yukawa couplings unrelated to symmetry. This situation is generic in higher dimensional unification where Yukawa couplings are predicted to have strength similar to the gauge couplings. Generations have then to be differentiated by symmetry properties and the structure of fermion mass matrices is given in terms of quantum numbers alone. We scan possible symmetries leading to realistic mass matrices. (orig.)

Reinventing Sex: The Construction of Realistic Definitions of Sex and Gender.

Science.gov (United States)

Small, Chanley M.

1998-01-01

Presents a set of criteria for constructing a fair and realistic understanding of sex. Recognizes the impact that science can have on social policies and values and recommends that the definitions of sex and gender be carefully crafted. (DDR)

Computational investigation of nonlinear microwave tomography on anatomically realistic breast phantoms

DEFF Research Database (Denmark)

Jensen, P. D.; Rubæk, Tonny; Mohr, J. J.

2013-01-01

The performance of a nonlinear microwave tomography algorithm is tested using simulated data from anatomically realistic breast phantoms. These tests include several different anatomically correct breast models from the University of Wisconsin-Madison repository with and without tumors inserted....

Whole exome sequencing identifies a POLRID mutation segregating in a father and two daughters with findings of Klippel-Feil and Treacher Collins syndromes.

Science.gov (United States)

Giampietro, Philip F; Armstrong, Linlea; Stoddard, Alex; Blank, Robert D; Livingston, Janet; Raggio, Cathy L; Rasmussen, Kristen; Pickart, Michael; Lorier, Rachel; Turner, Amy; Sund, Sarah; Sobrera, Nara; Neptune, Enid; Sweetser, David; Santiago-Cornier, Alberto; Broeckel, Ulrich

2015-01-01

We report on a father and his two daughters diagnosed with Klippel-Feil syndrome (KFS) but with craniofacial differences (zygomatic and mandibular hypoplasia and cleft palate) and external ear abnormalities suggestive of Treacher Collins syndrome (TCS). The diagnosis of KFS was favored, given that the neck anomalies were the predominant manifestations, and that the diagnosis predated later recognition of the association between spinal segmentation abnormalities and TCS. Genetic heterogeneity and the rarity of large families with KFS have limited the ability to identify mutations by traditional methods. Whole exome sequencing identified a nonsynonymous mutation in POLR1D (subunit of RNA polymerase I and II): exon2:c.T332C:p.L111P. Mutations in POLR1D are present in about 5% of individuals diagnosed with TCS. We propose that this mutation is causal in this family, suggesting a pathogenetic link between KFS and TCS. © 2014 Wiley Periodicals, Inc.

First report of bacterial speck of tomato caused by Pseudomonas syringae pv. tomato race 1 in Portugal

OpenAIRE

Cruz, L.; Cruz, J.; Eloy, M.; Oliveira, Helena; Vaz, H.; Tenreiro, R.

2010-01-01

Protected and open field tomato crops are economically important for Portuguese agriculture. In 1983, Pseudomonas syringae pv. tomato (Okabe, 1933) Young, Dye & Wilkie, 1978 was first reported affecting protected crops (3) and then later under open field conditions (1). In the 2009 spring/summer season, several outbreaks of bacterial speck of tomato showing an unusual degree of severity were observed in open fields from the Tagus Valley Region

Reduced transcription of TCOF1 in adult cells of Treacher Collins syndrome patients

Directory of Open Access Journals (Sweden)

Camargo Anamaria A

2009-12-01

Full Text Available Abstract Background Treacher Collins syndrome (TCS is an autosomal dominant craniofacial disorder caused by frameshift deletions or duplications in the TCOF1 gene. These mutations cause premature termination codons, which are predicted to lead to mRNA degradation by nonsense mediated mRNA decay (NMD. Haploinsufficiency of the gene product (treacle during embryonic development is the proposed molecular mechanism underlying TCS. However, it is still unknown if TCOF1 expression levels are decreased in post-embryonic human cells. Methods We have estimated TCOF1 transcript levels through real time PCR in mRNA obtained from leucocytes and mesenchymal cells of TCS patients (n = 23 and controls (n = 18. Mutational screening and analysis of NMD were performed by direct sequencing of gDNA and cDNA, respectively. Results All the 23 patients had typical clinical features of the syndrome and pathogenic mutations were detected in 19 of them. We demonstrated that the expression level of TCOF1 is 18-31% lower in patients than in controls (p , even if we exclude the patients in whom we did not detect the pathogenic mutation. We also observed that the mutant allele is usually less abundant than the wild type one in mesenchymal cells. Conclusions This is the first study to report decreased expression levels of TCOF1 in TCS adult human cells, but it is still unknown if this finding is associated to any phenotype in adulthood. In addition, as we demonstrated that alleles harboring the pathogenic mutations have lower expression, we herein corroborate the current hypothesis of NMD of the mutant transcript as the explanation for diminished levels of TCOF1 expression. Further, considering that TCOF1 deficiency in adult cells could be associated to pathologic clinical findings, it will be important to verify if TCS patients have an impairment in adult stem cell properties, as this can reduce the efficiency of plastic surgery results during rehabilitation of these

Plasticity-modulated seizure dynamics for seizure termination in realistic neuronal models

NARCIS (Netherlands)

Koppert, M.M.J.; Kalitzin, S.; Lopes da Silva, F.H.; Viergever, M.A.

2011-01-01

In previous studies we showed that autonomous absence seizure generation and termination can be explained by realistic neuronal models eliciting bi-stable dynamics. In these models epileptic seizures are triggered either by external stimuli (reflex epilepsies) or by internal fluctuations. This

Using realist synthesis to understand the mechanisms of interprofessional teamwork in health and social care.

Science.gov (United States)

Hewitt, Gillian; Sims, Sarah; Harris, Ruth

2014-11-01

Realist synthesis offers a novel and innovative way to interrogate the large literature on interprofessional teamwork in health and social care teams. This article introduces realist synthesis and its approach to identifying and testing the underpinning processes (or "mechanisms") that make an intervention work, the contexts that trigger those mechanisms and their subsequent outcomes. A realist synthesis of the evidence on interprofessional teamwork is described. Thirteen mechanisms were identified in the synthesis and findings for one mechanism, called "Support and value" are presented in this paper. The evidence for the other twelve mechanisms ("collaboration and coordination", "pooling of resources", "individual learning", "role blurring", "efficient, open and equitable communication", "tactical communication", "shared responsibility and influence", "team behavioural norms", "shared responsibility and influence", "critically reviewing performance and decisions", "generating and implementing new ideas" and "leadership") are reported in a further three papers in this series. The "support and value" mechanism referred to the ways in which team members supported one another, respected other's skills and abilities and valued each other's contributions. "Support and value" was present in some, but far from all, teams and a number of contexts that explained this variation were identified. The article concludes with a discussion of the challenges and benefits of undertaking this realist synthesis.

Automatic procedure for realistic 3D finite element modelling of human brain for bioelectromagnetic computations

International Nuclear Information System (INIS)

Aristovich, K Y; Khan, S H

2010-01-01

Realistic computer modelling of biological objects requires building of very accurate and realistic computer models based on geometric and material data, type, and accuracy of numerical analyses. This paper presents some of the automatic tools and algorithms that were used to build accurate and realistic 3D finite element (FE) model of whole-brain. These models were used to solve the forward problem in magnetic field tomography (MFT) based on Magnetoencephalography (MEG). The forward problem involves modelling and computation of magnetic fields produced by human brain during cognitive processing. The geometric parameters of the model were obtained from accurate Magnetic Resonance Imaging (MRI) data and the material properties - from those obtained from Diffusion Tensor MRI (DTMRI). The 3D FE models of the brain built using this approach has been shown to be very accurate in terms of both geometric and material properties. The model is stored on the computer in Computer-Aided Parametrical Design (CAD) format. This allows the model to be used in a wide a range of methods of analysis, such as finite element method (FEM), Boundary Element Method (BEM), Monte-Carlo Simulations, etc. The generic model building approach presented here could be used for accurate and realistic modelling of human brain and many other biological objects.

Blending critical realist and emancipatory practice development methodologies: making critical realism work in nursing research.

LENUS (Irish Health Repository)

Parlour, Randal

2012-12-01

This paper examines the efficacy of facilitation as a practice development intervention in changing practice within an Older Person setting and in implementing evidence into practice. It outlines the influences exerted by the critical realist paradigm in guiding emancipatory practice development activities and, in particular, how the former may be employed within an emancipatory practice development study to elucidate and increase understanding pertinent to causation and outcomes. The methodology is based upon an emancipatory practice development approach set within a realistic evaluation framework. This allows for systematic analysis of the social and contextual elements that influence the explication of outcomes associated with facilitation. The study is concentrated upon five practice development cycles, within which a sequence of iterative processes is integrated. The authors assert that combining critical realist and emancipatory processes offers a robust and practical method for translating evidence and implementing changes in practice, as the former affirms or falsifies the influence that emancipatory processes exert on attaining culture shift, and enabling transformation towards effective clinical practice. A new framework for practice development is proposed that establishes methodological coherency between emancipatory practice development and realistic evaluation. This augments the existing theoretical bases for both these approaches by contributing new theoretical and methodological understandings of causation.

ObamaNet: Photo-realistic lip-sync from text

OpenAIRE

Kumar, Rithesh; Sotelo, Jose; Kumar, Kundan; de Brebisson, Alexandre; Bengio, Yoshua

2017-01-01

We present ObamaNet, the first architecture that generates both audio and synchronized photo-realistic lip-sync videos from any new text. Contrary to other published lip-sync approaches, ours is only composed of fully trainable neural modules and does not rely on any traditional computer graphics methods. More precisely, we use three main modules: a text-to-speech network based on Char2Wav, a time-delayed LSTM to generate mouth-keypoints synced to the audio, and a network based on Pix2Pix to ...

Ultra-Reliable Communications in Failure-Prone Realistic Networks

DEFF Research Database (Denmark)

Gerardino, Guillermo Andrés Pocovi; Lauridsen, Mads; Alvarez, Beatriz Soret

2016-01-01

We investigate the potential of different diversity and interference management techniques to achieve the required downlink SINR outage probability for ultra-reliable communications. The evaluation is performed in a realistic network deployment based on site-specific data from a European capital....... Micro and macroscopic diversity techniques are proved to be important enablers of ultra-reliable communications. Particularly, it is shown how a 4x4 MIMO scheme with three orders of macroscopic diversity can achieve the required SINR outage performance. Smaller gains are obtained from interference...

Realist Stronghold in the Land of Thucydides? - Appraising and Resisting a Realist Tradition in Greece

Directory of Open Access Journals (Sweden)

Kyriakos Mikelis

2015-10-01

Full Text Available Given the integration of the discipline of International Relations in Greece into the global discipline since a few decades, the article addresses the reflection of the ‘realism in and for the globe’ question to this specific case. Although the argument doesn’t go as far as to ‘recover’ forgotten IR theorists or self-proclaimed realists, a geopolitical dimension of socio-economic thought during interwar addressed concerns which could be related to the intricacies of realpolitik. Then again at current times, certain scholars have been eager to maintain a firm stance in favor of realism, focusing on the work of ancient figures, especially Thucydides or Homer, and on questions of the offensive-defensive realism debate as well as on the connection with the English School, while others have offered fruitful insights matching the broad constructivist agenda. Overall, certain genuine arguments have appeared, reflecting diversified views about sovereignty and its function or mitigation.

Realistically Rendering SoC Traffic Patterns with Interrupt Awareness

DEFF Research Database (Denmark)

Angiolini, Frederico; Mahadevan, Sharkar; Madsen, Jan

2005-01-01

to generate realistic test traffic. This paper presents a selection of applications using interrupt-based synchronization; a reference methodology to split such applications in execution subflows and to adjust the overall execution stream based upon hardware events; a reactive simulation device capable...... of correctly replicating such software behaviours in the MPSoC design phase. Additionally, we validate the proposed concept by showing cycle-accurate reproduction of a previously traced application flow....

Realistic Simulations of Coronagraphic Observations with WFIRST

Science.gov (United States)

Rizzo, Maxime; Zimmerman, Neil; Roberge, Aki; Lincowski, Andrew; Arney, Giada; Stark, Chris; Jansen, Tiffany; Turnbull, Margaret; WFIRST Science Investigation Team (Turnbull)

2018-01-01

We present a framework to simulate observing scenarios with the WFIRST Coronagraphic Instrument (CGI). The Coronagraph and Rapid Imaging Spectrograph in Python (crispy) is an open-source package that can be used to create CGI data products for analysis and development of post-processing routines. The software convolves time-varying coronagraphic PSFs with realistic astrophysical scenes which contain a planetary architecture, a consistent dust structure, and a background field composed of stars and galaxies. The focal plane can be read out by a WFIRST electron-multiplying CCD model directly, or passed through a WFIRST integral field spectrograph model first. Several elementary post-processing routines are provided as part of the package.

UE4Sim: A Photo-Realistic Simulator for Computer Vision Applications

KAUST Repository

Mueller, Matthias; Casser, Vincent; Lahoud, Jean; Smith, Neil; Ghanem, Bernard

2017-01-01

We present a photo-realistic training and evaluation simulator (UE4Sim) with extensive applications across various fields of computer vision. Built on top of the Unreal Engine, the simulator integrates full featured physics based cars, unmanned aerial vehicles (UAVs), and animated human actors in diverse urban and suburban 3D environments. We demonstrate the versatility of the simulator with two case studies: autonomous UAV-based tracking of moving objects and autonomous driving using supervised learning. The simulator fully integrates both several state-of-the-art tracking algorithms with a benchmark evaluation tool and a deep neural network (DNN) architecture for training vehicles to drive autonomously. It generates synthetic photo-realistic datasets with automatic ground truth annotations to easily extend existing real-world datasets and provides extensive synthetic data variety through its ability to reconfigure synthetic worlds on the fly using an automatic world generation tool.

UE4Sim: A Photo-Realistic Simulator for Computer Vision Applications

KAUST Repository

Mueller, Matthias

2017-08-19

We present a photo-realistic training and evaluation simulator (UE4Sim) with extensive applications across various fields of computer vision. Built on top of the Unreal Engine, the simulator integrates full featured physics based cars, unmanned aerial vehicles (UAVs), and animated human actors in diverse urban and suburban 3D environments. We demonstrate the versatility of the simulator with two case studies: autonomous UAV-based tracking of moving objects and autonomous driving using supervised learning. The simulator fully integrates both several state-of-the-art tracking algorithms with a benchmark evaluation tool and a deep neural network (DNN) architecture for training vehicles to drive autonomously. It generates synthetic photo-realistic datasets with automatic ground truth annotations to easily extend existing real-world datasets and provides extensive synthetic data variety through its ability to reconfigure synthetic worlds on the fly using an automatic world generation tool.

Sim4CV: A Photo-Realistic Simulator for Computer Vision Applications

KAUST Repository

Müller, Matthias

2018-03-24

We present a photo-realistic training and evaluation simulator (Sim4CV) (http://www.sim4cv.org) with extensive applications across various fields of computer vision. Built on top of the Unreal Engine, the simulator integrates full featured physics based cars, unmanned aerial vehicles (UAVs), and animated human actors in diverse urban and suburban 3D environments. We demonstrate the versatility of the simulator with two case studies: autonomous UAV-based tracking of moving objects and autonomous driving using supervised learning. The simulator fully integrates both several state-of-the-art tracking algorithms with a benchmark evaluation tool and a deep neural network architecture for training vehicles to drive autonomously. It generates synthetic photo-realistic datasets with automatic ground truth annotations to easily extend existing real-world datasets and provides extensive synthetic data variety through its ability to reconfigure synthetic worlds on the fly using an automatic world generation tool.

Operator representation for effective realistic interactions

Energy Technology Data Exchange (ETDEWEB)

Weber, Dennis; Feldmeier, Hans; Neff, Thomas [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany)

2013-07-01

We present a method to derive an operator representation from the partial wave matrix elements of effective realistic nucleon-nucleon potentials. This method allows to employ modern effective interactions, which are mostly given in matrix element representation, also in nuclear many-body methods requiring explicitly the operator representation, for example ''Fermionic Molecular Dynamics'' (FMD). We present results for the operator representation of effective interactions obtained from the Argonne V18 potential with the Uenitary Correlation Operator Method'' (UCOM) and the ''Similarity Renormalization Group'' (SRG). Moreover, the operator representation allows a better insight in the nonlocal structure of the potential: While the UCOM transformed potential only shows a quadratic momentum dependence, the momentum dependence of SRG transformed potentials is beyond such a simple polynomial form.

A Generalized Pyramid Matching Kernel for Human Action Recognition in Realistic Videos

Directory of Open Access Journals (Sweden)

Wenjun Zhang

2013-10-01

Full Text Available Human action recognition is an increasingly important research topic in the fields of video sensing, analysis and understanding. Caused by unconstrained sensing conditions, there exist large intra-class variations and inter-class ambiguities in realistic videos, which hinder the improvement of recognition performance for recent vision-based action recognition systems. In this paper, we propose a generalized pyramid matching kernel (GPMK for recognizing human actions in realistic videos, based on a multi-channel “bag of words” representation constructed from local spatial-temporal features of video clips. As an extension to the spatial-temporal pyramid matching (STPM kernel, the GPMK leverages heterogeneous visual cues in multiple feature descriptor types and spatial-temporal grid granularity levels, to build a valid similarity metric between two video clips for kernel-based classification. Instead of the predefined and fixed weights used in STPM, we present a simple, yet effective, method to compute adaptive channel weights of GPMK based on the kernel target alignment from training data. It incorporates prior knowledge and the data-driven information of different channels in a principled way. The experimental results on three challenging video datasets (i.e., Hollywood2, Youtube and HMDB51 validate the superiority of our GPMK w.r.t. the traditional STPM kernel for realistic human action recognition and outperform the state-of-the-art results in the literature.

Report of the workshop on realistic SSC lattices

International Nuclear Information System (INIS)

1985-10-01

A workshop was held at the SSC Central Design Group from May 29 to June 4, 1985, on topics relating to the lattice of the SSC. The workshop marked a shift of emphasis from the investigation of simplified test lattices to the development of a realistic lattice suitable for the conceptual design report. The first day of the workshop was taken up by reviews of accelerator system requirements, of the reference design solutions for these requirements, of lattice work following the reference design, and of plans for the workshop. The work was divided among four working groups. The first, chaired by David Douglas, concerned the arcs of regular cells. The second group, which studied the utility insertions, was chaired by Beat Leemann. The third group, under David E. Johnson, concerned itself with the experimental insertions, dispersion suppressors, and phase trombones. The fourth group, responsible for global lattice considerations and the design of a new realistic lattice example, was led by Ernest Courant. The papers resulting from this workshop are roughly divided into three sets: those relating to specific lattice components, to complete lattices, and to other topics. Among the salient accomplishments of the workshop were additions to and optimization of lattice components, especially those relating to lattices using 1-in-1 magnets, either horizontally or vertically separated, and the design of complete lattice examples. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

Fort Collins Science Center- Policy Analysis and Science Assistance Branch : Integrating social, behavioral, economic and biological sciences

Science.gov (United States)

2010-01-01

The Fort Collins Science Center's Policy Analysis and Science Assistance (PASA) Branch is a team of approximately 22 scientists, technicians, and graduate student researchers. PASA provides unique capabilities in the U.S. Geological Survey by leading projects that integrate social, behavioral, economic, and biological analyses in the context of human-natural resource interactions. Resource planners, managers, and policymakers in the U.S. Departments of the Interior (DOI) and Agriculture (USDA), State and local agencies, as well as international agencies use information from PASA studies to make informed natural resource management and policy decisions. PASA scientists' primary functions are to conduct both theoretical and applied social science research, provide technical assistance, and offer training to advance performance in policy relevant research areas. Management and research issues associated with human-resource interactions typically occur in a unique context, involve difficult to access populations, require knowledge of both natural/biological science in addition to social science, and require the skill to integrate multiple science disciplines. In response to these difficult contexts, PASA researchers apply traditional and state-of-the-art social science methods drawing from the fields of sociology, demography, economics, political science, communications, social-psychology, and applied industrial organization psychology. Social science methods work in concert with our rangeland/agricultural management, wildlife, ecology, and biology capabilities. The goal of PASA's research is to enhance natural resource management, agency functions, policies, and decision-making. Our research is organized into four broad areas of study.

C02(nu2)-0 Quenching Rate Coefficient Derived from Coincidental Fort Collins Lidar and SABER Measurements

Science.gov (United States)

Feofilov, A. G.; Kutepov, A. A.; She, C. Y.; Smith, A. K.; Pesnell, W. D.; Goldberg, R. A.

2009-01-01

Among the processes governing the energy balance in the mesosphere and lower thermosphere (MLT), the quenching of CO2(V2) vibrational levels in collisions with oxygen atoms plays an important role. However, neither the rate coefficient of this process (k(CO2O)) nor the atomic oxygen concentrations ([O]) in the MLT are well known. The discrepancy between k(CO2O) measured in the lab and retrieved from atmospheric measurements is of about factor of 2.5. At the same time, the discrepancy between [O] in the MLT measured by different instruments is of the same order of magnitude. In this work we used a synergy of a ground based lidar and satellite infrared radiometer to make a further step in understanding of the physics of the region. In this study we apply the night- and daytime temperatures between 80 and 110 km measured by the Colorado State University narrow-band sodium (Na) lidar located at Fort Collins, Colorado for retrieving the product of k(CO2-O) x [O] from the limb radiances in the 15 micron channel measured by the SABER/TIMED instrument for nearly simultaneous common volume measurements of both instruments within +/-1 degree in latitude, +/-2 degrees in longitude and +/-10 minutes in time. We derive k(CO2-O) and its possible variation range from the retrieved product by utilizing the [O] values measured by the SABER and other instruments.

Complete methodology on generating realistic wind speed profiles based on measurements

DEFF Research Database (Denmark)

Gavriluta, Catalin; Spataru, Sergiu; Mosincat, Ioan

2012-01-01

, wind modelling for medium and large time scales is poorly treated in the present literature. This paper presents methods for generating realistic wind speed profiles based on real measurements. The wind speed profile is divided in a low- frequency component (describing long term variations...

Neural Correlates of Realistic and Unrealistic Auditory Space Perception

Directory of Open Access Journals (Sweden)

Akiko Callan

2011-10-01

Full Text Available Binaural recordings can simulate externalized auditory space perception over headphones. However, if the orientation of the recorder's head and the orientation of the listener's head are incongruent, the simulated auditory space is not realistic. For example, if a person lying flat on a bed listens to an environmental sound that was recorded by microphones inserted in ears of a person who was in an upright position, the sound simulates an auditory space rotated 90 degrees to the real-world horizontal axis. Our question is whether brain activation patterns are different between the unrealistic auditory space (ie, the orientation of the listener's head and the orientation of the recorder's head are incongruent and the realistic auditory space (ie, the orientations are congruent. River sounds that were binaurally recorded either in a supine position or in an upright body position were served as auditory stimuli. During fMRI experiments, participants listen to the stimuli and pressed one of two buttons indicating the direction of the water flow (horizontal/vertical. Behavioral results indicated that participants could not differentiate between the congruent and the incongruent conditions. However, neuroimaging results showed that the congruent condition activated the planum temporale significantly more than the incongruent condition.

Effect of geometry on concentration polarization in realistic heterogeneous permselective systems

Science.gov (United States)

Green, Yoav; Shloush, Shahar; Yossifon, Gilad

2014-04-01

This study extends previous analytical solutions of concentration polarization occurring solely in the depleted region, to the more realistic geometry consisting of a three-dimensional (3D) heterogeneous ion-permselective medium connecting two opposite microchambers (i.e., a three-layer system). Under the local electroneutrality approximation, the separation of variable methods is used to derive an analytical solution of the electrodiffusive problem for the two opposing asymmetric microchambers. The assumption of an ideal permselective medium allows for the analytic calculation of the 3D concentration and electric potential distributions as well as a current-voltage relation. It is shown that any asymmetry in the microchamber geometries will result in current rectification. Moreover, it is demonstrated that for non-negligible microchamber resistances, the conductance does not exhibit the expected saturation at low concentrations but instead shows a continuous decrease. The results are intended to facilitate a more direct comparison between theory and experiments, as now the voltage drop is across a realistic 3D and three-layer system.

Realistic nuclear shell theory and the doubly-magic 132Sn region

International Nuclear Information System (INIS)

Vary, J.P.

1978-01-01

After an introduction discussing the motivation and interest in results obtained with isotope separators, the fundamental problem in realistic nuclear shell theory is posed in the context of renormalization theory. Then some of the important developments that have occurred over the last fifteen years in the derivation of the effective Hamiltonian and application of realistic nuclear shell theory are briefly reviewed. Doubly magic regions of the periodic table and the unique advantages of the 132 Sn region are described. Then results are shown for the ground-state properties of 132 Sn as calculated from the density-dependent Hartree-Fock approach with the Skyrme Hamiltonian. A single theoretical Hamiltonian for all nuclei from doubly magic 132 Sn to doubly magic 208 Pb is presented; single-particle energies are graphed. Finally, predictions of shell-model level-density distributions obtained with spectral distribution methods are discussed; calculated level densities are shown for 136 Xe. 10 figures

A Realistic Human Exposure Assessment of Indoor Radon released from Groundwater

International Nuclear Information System (INIS)

Yu, Dong Han; Han, Moon Hee

2002-01-01

The work presents a realistic human exposure assessment of indoor radon released from groundwater in a house. At first, a two-compartment model is developed to describe the generation and transfer of radon in indoor air from groundwater. The model is used to estimate radon concentrations profile of indoor air in a house using by showering, washing clothes, and flushing toilets. Then, the study performs an uncertainty analysis of model input parameters to quantify the uncertainty in radon concentration profile. In order to estimate a daily internal dose of a specific tissue group in an adult through the inhalation of such indoor radon, a PBPK(Physiologically-Based Pharmaco-Kinetic) model is developed. Combining indoor radon profile and PBPK model is used to a realistic human assessment for such exposure. The results obtained from this study would be used to the evaluation of human risk by inhalation associated with the indoor radon released from groundwater

Realistic Paleobathymetry of the Cenomanian–Turonian (94 Ma Boundary Global Ocean

Directory of Open Access Journals (Sweden)

Arghya Goswami

2018-01-01

Full Text Available At present, global paleoclimate simulations are prepared with bathtub-like, flat, featureless and steep walled ocean bathymetry, which is neither realistic nor suitable. In this article, we present the first enhanced version of a reconstructed paleobathymetry for Cenomanian–Turonian (94 Ma time in a 0.1° × 0.1° resolution, that is both realistic and suitable for use in paleo-climate studies. This reconstruction is an extrapolation of a parameterized modern ocean bathymetry that combines simple geophysical models (standard plate cooling model for the oceanic lithosphere based on ocean crustal age, global modern oceanic sediment thicknesses, and generalized shelf-slope-rise structures calibrated from a published global relief model of the modern world (ETOPO1 at active and passive continental margins. The base version of this Cenomanian–Turonian paleobathymetry reconstruction is then updated with known submarine large igneous provinces, plateaus, and seamounts to minimize the difference between the reconstructed paleobathymetry and the real bathymetry that once existed.

Book Review: A Liberal Actor in a Realist World the European Union ...

African Journals Online (AJOL)

Abstract. Book Title: A Liberal Actor in a Realist World the European Union Regulatory State and the Global Political Economy of Energy. Book Author: Andreas Goldthau & Nick Sitter. Oxford University Press Oxford 2015. ISBN 9780198719595 ...

The Influence Of Customer Satisfaction Towards Brand Loyalty Among Women Gadget User From Apple Brand

OpenAIRE

Silaen, Serefhy Meilani

2016-01-01

This study aims to determine The influence of Customer satisfaction towards Brand loyalty among women gadget user from apple brand. Subjects in this study were 100 female consumer from apple brand who make repurchases minimum 3 times. Subjects were obtained by purposive sampling technique. This study used customer satisfaction scale based on the theory from Susanto and Wijanarko (2004). It also includes theories about the elements of customer satisfaction by Wilkie (1994). Brand loyalty scale...

Comparison of temporal realistic telecommunication base station exposure with worst-case estimation in two countries

International Nuclear Information System (INIS)

Mahfouz, Z.; Verloock, L.; Joseph, W.; Tanghe, E.; Gati, A.; Wiart, J.; Lautru, D.; Hanna, V. F.; Martens, L.

2013-01-01

The influence of temporal daily exposure to global system for mobile communications (GSM) and universal mobile telecommunications systems and high speed down-link packet access (UMTS-HSDPA) is investigated using spectrum analyser measurements in two countries, France and Belgium. Temporal variations and traffic distributions are investigated. Three different methods to estimate maximal electric-field exposure are compared. The maximal realistic (99 %) and the maximal theoretical extrapolation factor used to extrapolate the measured broadcast control channel (BCCH) for GSM and the common pilot channel (CPICH) for UMTS are presented and compared for the first time in the two countries. Similar conclusions are found in the two countries for both urban and rural areas: worst-case exposure assessment overestimates realistic maximal exposure up to 5.7 dB for the considered example. In France, the values are the highest, because of the higher population density. The results for the maximal realistic extrapolation factor at the weekdays are similar to those from weekend days. (authors)

Comparison of temporal realistic telecommunication base station exposure with worst-case estimation in two countries.

Science.gov (United States)

Mahfouz, Zaher; Verloock, Leen; Joseph, Wout; Tanghe, Emmeric; Gati, Azeddine; Wiart, Joe; Lautru, David; Hanna, Victor Fouad; Martens, Luc

2013-12-01

The influence of temporal daily exposure to global system for mobile communications (GSM) and universal mobile telecommunications systems and high speed downlink packet access (UMTS-HSDPA) is investigated using spectrum analyser measurements in two countries, France and Belgium. Temporal variations and traffic distributions are investigated. Three different methods to estimate maximal electric-field exposure are compared. The maximal realistic (99 %) and the maximal theoretical extrapolation factor used to extrapolate the measured broadcast control channel (BCCH) for GSM and the common pilot channel (CPICH) for UMTS are presented and compared for the first time in the two countries. Similar conclusions are found in the two countries for both urban and rural areas: worst-case exposure assessment overestimates realistic maximal exposure up to 5.7 dB for the considered example. In France, the values are the highest, because of the higher population density. The results for the maximal realistic extrapolation factor at the weekdays are similar to those from weekend days.

Highly Realistic Training for Navy Corpsmen: A Follow-up Assessment

Science.gov (United States)

2017-10-12

based training for military medical providers. One such training is highly realistic training. Based on the success of the Infantry Immersion ...observation with minimal participation improves paediatric emergency medicine knowledge, skills and confidence. Emergency Medicine Journal , 32(3), 195... immersive training for Navy corpsmen: Preliminary results. Military Medicine, 179(12), 1439–1443. Booth-Kewley, S., McWhorter, S. K., Dell’Acqua, R

Realistic microscopic level densities for spherical nuclei

International Nuclear Information System (INIS)

Cerf, N.

1994-01-01

Nuclear level densities play an important role in nuclear reactions such as the formation of the compound nucleus. We develop a microscopic calculation of the level density based on a combinatorial evaluation from a realistic single-particle level scheme. This calculation makes use of a fast Monte Carlo algorithm allowing us to consider large shell model spaces which could not be treated previously in combinatorial approaches. Since our model relies on a microscopic basis, it can be applied to exotic nuclei with more confidence than the commonly used semiphenomenological formuals. An exhaustive comparison of our predicted neutron s-wave resonance spacings with experimental data for a wide range of nuclei is presented

Lung preservation with Euro-Collins, University of Wisconsin, Wallwork, and low-potassium-dextran solution. Université++ Paris-Sud Lung Transplant Group.

Science.gov (United States)

Xiong, L; Mazmanian, M; Chapelier, A R; Reignier, J; Weiss, M; Dartevelle, P G; Hervé, P

1994-09-01

Using isolated rat lungs, we compared prevention of ischemia-reperfusion injury provided by flushing the lungs with modified Euro-Collins solution (EC), University of Wisconsin solution (UW), low-potassium-dextran solution (LPD), or Wallwork solution (WA). After 4 hours' and 6 hours' cold ischemia, reperfusion injury was assessed on the basis of changes in filtration coefficients (Kfc) and pressure-flow curves, characterized by the slope of the curves (incremental resistance) and the extrapolation of this slope to zero flow (pulmonary pressure intercept [Ppi]). After 4 hours, Kfc and Ppi were higher with EC than with UW, LPD, and WA, and the incremental resistance was higher with EC and UW. After 6 hours, Kfc and incremental resistance Ppi were higher with LPD than with WA. Because ischemia-reperfusion injury is associated with decreased endothelial synthesis of prostacyclin and nitric oxide, we tested whether the addition of prostacyclin or the nitric oxide precursor L-arginine to WA would improve preservation. The Kfc and Ppi were lower with both treatments. In conclusion, ischemia-reperfusion injury was best prevented by using WA. The favorable effect of prostacyclin or L-arginine emphasizes the role played by endothelial dysfunction in ischemia-reperfusion injury.

Lessons learned in using realist evaluation to assess maternal and newborn health programming in rural Bangladesh.

Science.gov (United States)

Adams, Alayne; Sedalia, Saroj; McNab, Shanon; Sarker, Malabika

2016-03-01

Realist evaluation furnishes valuable insight to public health practitioners and policy makers about how and why interventions work or don't work. Moving beyond binary measures of success or failure, it provides a systematic approach to understanding what goes on in the 'Black Box' and how implementation decisions in real life contexts can affect intervention effectiveness. This paper reflects on an experience in applying the tenets of realist evaluation to identify optimal implementation strategies for scale-up of Maternal and Newborn Health (MNH) programmes in rural Bangladesh. Supported by UNICEF, the three MNH programmes under consideration employed different implementation models to deliver similar services and meet similar MNH goals. Programme targets included adoption of recommended antenatal, post-natal and essential newborn care practices; health systems strengthening through improved referral, accountability and administrative systems, and increased community knowledge. Drawing on focused examples from this research, seven steps for operationalizing the realist evaluation approach are offered, while emphasizing the need to iterate and innovate in terms of methods and analysis strategies. The paper concludes by reflecting on lessons learned in applying realist evaluation, and the unique insights it yields regarding implementation strategies for successful MNH programming. © The Author 2015. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine.

Armageddon polytropos. Realistic thinking and nuclear fact, views on a half-century of inter-paradigmatic debates

International Nuclear Information System (INIS)

Zajec, Olivier

2017-01-01

At the end of the Second World War, nuclear weapons immediately became a privileged topic of study for the nascent discipline of International Relations (RI). Within it, the realist school has attempted to integrate nuclear weapons into a general strategic reflection on the evolution of interstate foreign policy. So deeply indeed that, according to a common opinion, a kind of fusion occurred between the realist paradigm and nuclear power: in short, 'defending' nuclear deterrence would mean making profession of realism. However, the link between realism and nuclear power is more complex than is commonly thought. To grasp its nuances, it is probably necessary to draw a parallel between the concrete and practical evolution of the Western military nuclear doctrines, on the one hand, and, on the other hand, the theoretical and conceptual positions taken by realistic politicians from 1945 to the present day. It is the object of this article, which aims to recall the articulations between the realistic thought of the IR and the nuclear fact, in order to put them in historical perspective, so as to suggest that the 'interlocking web of thought' that is realism, far from being monolithic, has had - and continues to have - multiple nuclear facets

A linear evolution for non-linear dynamics and correlations in realistic nuclei

International Nuclear Information System (INIS)

Levin, E.; Lublinsky, M.

2004-01-01

A new approach to high energy evolution based on a linear equation for QCD generating functional is developed. This approach opens a possibility for systematic study of correlations inside targets, and, in particular, inside realistic nuclei. Our results are presented as three new equations. The first one is a linear equation for QCD generating functional (and for scattering amplitude) that sums the 'fan' diagrams. For the amplitude this equation is equivalent to the non-linear Balitsky-Kovchegov equation. The second equation is a generalization of the Balitsky-Kovchegov non-linear equation to interactions with realistic nuclei. It includes a new correlation parameter which incorporates, in a model-dependent way, correlations inside the nuclei. The third equation is a non-linear equation for QCD generating functional (and for scattering amplitude) that in addition to the 'fan' diagrams sums the Glauber-Mueller multiple rescatterings

Development of Contextual Mathematics teaching Material integrated related sciences and realistic for students grade xi senior high school

Science.gov (United States)

Helma, H.; Mirna, M.; Edizon, E.

2018-04-01

Mathematics is often applied in physics, chemistry, economics, engineering, and others. Besides that, mathematics is also used in everyday life. Learning mathematics in school should be associated with other sciences and everyday life. In this way, the learning of mathematics is more realstic, interesting, and meaningful. Needs analysis shows that required contextual mathematics teaching materials integrated related sciences and realistic on learning mathematics. The purpose of research is to produce a valid and practical contextual mathematics teaching material integrated related sciences and realistic. This research is development research. The result of this research is a valid and practical contextual mathematics teaching material integrated related sciences and realistic produced

Realistic Avatar Eye and Head Animation Using a Neurobiological Model of Visual Attention

National Research Council Canada - National Science Library

Itti, L; Dhavale, N; Pighin, F

2003-01-01

We describe a neurobiological model of visual attention and eye/head movements in primates, and its application to the automatic animation of a realistic virtual human head watching an unconstrained...

Development of Realistic Head Models for Electromagnetic Source Imaging of the Human Brain

National Research Council Canada - National Science Library

Akalin, Z

2001-01-01

... images is performed Then triangular, quadratic meshes are formed for the interfaces of the tissues, Thus, realistic meshes, representing scalp, skull, CSF, brain and eye tissues, are formed, At least...

Protocol for a realist review of workplace learning in postgraduate medical education and training.

Science.gov (United States)

Wiese, Anel; Kilty, Caroline; Bergin, Colm; Flood, Patrick; Fu, Na; Horgan, Mary; Higgins, Agnes; Maher, Bridget; O'Kane, Grainne; Prihodova, Lucia; Slattery, Dubhfeasa; Bennett, Deirdre

2017-01-19

Postgraduate medical education and training (PGMET) is a complex social process which happens predominantly during the delivery of patient care. The clinical learning environment (CLE), the context for PGMET, shapes the development of the doctors who learn and work within it, ultimately impacting the quality and safety of patient care. Clinical workplaces are complex, dynamic systems in which learning emerges from non-linear interactions within a network of related factors and activities. Those tasked with the design and delivery of postgraduate medical education and training need to understand the relationship between the processes of medical workplace learning and these contextual elements in order to optimise conditions for learning. We propose to conduct a realist synthesis of the literature to address the overarching questions; how, why and in what circumstances do doctors learn in clinical environments? This review is part of a funded projected with the overall aim of producing guidelines and recommendations for the design of high quality clinical learning environments for postgraduate medical education and training. We have chosen realist synthesis as a methodology because of its suitability for researching complexity and producing answers useful to policymakers and practitioners. This realist synthesis will follow the steps and procedures outlined by Wong et al. in the RAMESES Publication Standards for Realist Synthesis and the Realist Synthesis RAMESES Training Materials. The core research team is a multi-disciplinary group of researchers, clinicians and health professions educators. The wider research group includes experts in organisational behaviour and human resources management as well as the key stakeholders; doctors in training, patient representatives and providers of PGMET. This study will draw from the published literature and programme, and substantive, theories of workplace learning, to describe context, mechanism and outcome configurations for

Dynamic apeerture in damping rings with realistic wigglers

Energy Technology Data Exchange (ETDEWEB)

Cai, Yunhai; /SLAC

2005-05-04

The International Linear Collider based on superconducting RF cavities requires the damping rings to have extremely small equilibrium emittance, huge circumference, fast damping time, and large acceptance. To achieve all of these requirements is a very challenging task. In this paper, we will present a systematic approach to designing the damping rings using simple cells and non-interlaced sextupoles. The designs of the damping rings with various circumferences and shapes, including dogbone, are presented. To model realistic wigglers, we have developed a new hybrid symplectic integrator for faster and accurate evaluation of dynamic aperture of the lattices.

Do absorption and realistic distraction influence performance of component task surgical procedure?

NARCIS (Netherlands)

Pluyter, J.R.; Buzink, S.N.; Rutkowski, A.F.; Jakimowicz, J.J.

2009-01-01

Background. Surgeons perform complex tasks while exposed to multiple distracting sources that may increase stress in the operating room (e.g., music, conversation, and unadapted use of sophisticated technologies). This study aimed to examine whether such realistic social and technological

Population of 224 realistic human subject-based computational breast phantoms

Energy Technology Data Exchange (ETDEWEB)

Erickson, David W. [Carl E. Ravin Advanced Imaging Laboratories, Duke University Medical Center, Durham, North Carolina 27705 and Medical Physics Graduate Program, Duke University, Durham, North Carolina 27705 (United States); Wells, Jered R., E-mail: jered.wells@duke.edu [Clinical Imaging Physics Group and Carl E. Ravin Advanced Imaging Laboratories, Duke University Medical Center, Durham, North Carolina 27705 and Medical Physics Graduate Program, Duke University, Durham, North Carolina 27705 (United States); Sturgeon, Gregory M. [Carl E. Ravin Advanced Imaging Laboratories, Duke University Medical Center, Durham, North Carolina 27705 (United States); Samei, Ehsan [Department of Radiology and Carl E. Ravin Advanced Imaging Laboratories, Duke University Medical Center, Durham, North Carolina 27705 and Departments of Physics, Electrical and Computer Engineering, and Biomedical Engineering, and Medical Physics Graduate Program, Duke University, Durham, North Carolina 27705 (United States); Dobbins, James T. [Department of Radiology and Carl E. Ravin Advanced Imaging Laboratories, Duke University Medical Center, Durham, North Carolina 27705 and Departments of Physics and Biomedical Engineering and Medical Physics Graduate Program, Duke University, Durham, North Carolina 27705 (United States); Segars, W. Paul [Department of Radiology and Carl E. Ravin Advanced Imaging Laboratories, Duke University Medical Center, Durham, North Carolina 27705 and Medical Physics Graduate Program, Duke University, Durham, North Carolina 27705 (United States); Lo, Joseph Y. [Department of Radiology and Carl E. Ravin Advanced Imaging Laboratories, Duke University Medical Center, Durham, North Carolina 27705 and Departments of Electrical and Computer Engineering and Biomedical Engineering and Medical Physics Graduate Program, Duke University, Durham, North Carolina 27705 (United States)

2016-01-15

Purpose: To create a database of highly realistic and anatomically variable 3D virtual breast phantoms based on dedicated breast computed tomography (bCT) data. Methods: A tissue classification and segmentation algorithm was used to create realistic and detailed 3D computational breast phantoms based on 230 + dedicated bCT datasets from normal human subjects. The breast volume was identified using a coarse three-class fuzzy C-means segmentation algorithm which accounted for and removed motion blur at the breast periphery. Noise in the bCT data was reduced through application of a postreconstruction 3D bilateral filter. A 3D adipose nonuniformity (bias field) correction was then applied followed by glandular segmentation using a 3D bias-corrected fuzzy C-means algorithm. Multiple tissue classes were defined including skin, adipose, and several fractional glandular densities. Following segmentation, a skin mask was produced which preserved the interdigitated skin, adipose, and glandular boundaries of the skin interior. Finally, surface modeling was used to produce digital phantoms with methods complementary to the XCAT suite of digital human phantoms. Results: After rejecting some datasets due to artifacts, 224 virtual breast phantoms were created which emulate the complex breast parenchyma of actual human subjects. The volume breast density (with skin) ranged from 5.5% to 66.3% with a mean value of 25.3% ± 13.2%. Breast volumes ranged from 25.0 to 2099.6 ml with a mean value of 716.3 ± 386.5 ml. Three breast phantoms were selected for imaging with digital compression (using finite element modeling) and simple ray-tracing, and the results show promise in their potential to produce realistic simulated mammograms. Conclusions: This work provides a new population of 224 breast phantoms based on in vivo bCT data for imaging research. Compared to previous studies based on only a few prototype cases, this dataset provides a rich source of new cases spanning a wide range

Development of Realistic Head Models for Electromagnetic Source Imaging of the Human Brain

National Research Council Canada - National Science Library

Akalin, Z

2001-01-01

In this work, a methodology is developed to solve the forward problem of electromagnetic source imaging using realistic head models, For this purpose, first segmentation of the 3 dimensional MR head...

Level density from realistic nuclear potentials

International Nuclear Information System (INIS)

Calboreanu, A.

2006-01-01

Nuclear level density of some nuclei is calculated using a realistic set of single particle states (sps). These states are derived from the parameterization of nuclear potentials that describe the observed sps over a large number of nuclei. This approach has the advantage that one can infer level density for nuclei that are inaccessible for a direct study, but are very important in astrophysical processes such as those close to the drip lines. Level densities at high excitation energies are very sensitive to the actual set of sps. The fact that the sps spectrum is finite has extraordinary consequences upon nuclear reaction yields due to the leveling-off of the level density at extremely high excitation energies wrongly attributed so far to other nuclear effects. Single-particle level density parameter a parameter is extracted by fitting the calculated densities to the standard Bethe formula

Development and application of a deterministic-realistic hybrid methodology for LOCA licensing analysis

International Nuclear Information System (INIS)

Liang, Thomas K.S.; Chou, Ling-Yao; Zhang, Zhongwei; Hsueh, Hsiang-Yu; Lee, Min

2011-01-01

Highlights: → A new LOCA licensing methodology (DRHM, deterministic-realistic hybrid methodology) was developed. → DRHM involves conservative Appendix K physical models and statistical treatment of plant status uncertainties. → DRHM can generate 50-100 K PCT margin as compared to a traditional Appendix K methodology. - Abstract: It is well recognized that a realistic LOCA analysis with uncertainty quantification can generate greater safety margin as compared with classical conservative LOCA analysis using Appendix K evaluation models. The associated margin can be more than 200 K. To quantify uncertainty in BELOCA analysis, generally there are two kinds of uncertainties required to be identified and quantified, which involve model uncertainties and plant status uncertainties. Particularly, it will take huge effort to systematically quantify individual model uncertainty of a best estimate LOCA code, such as RELAP5 and TRAC. Instead of applying a full ranged BELOCA methodology to cover both model and plant status uncertainties, a deterministic-realistic hybrid methodology (DRHM) was developed to support LOCA licensing analysis. Regarding the DRHM methodology, Appendix K deterministic evaluation models are adopted to ensure model conservatism, while CSAU methodology is applied to quantify the effect of plant status uncertainty on PCT calculation. Generally, DRHM methodology can generate about 80-100 K margin on PCT as compared to Appendix K bounding state LOCA analysis.

Simplified realistic human head model for simulating Tumor Treating Fields (TTFields).

Science.gov (United States)

Wenger, Cornelia; Bomzon, Ze'ev; Salvador, Ricardo; Basser, Peter J; Miranda, Pedro C

2016-08-01

Tumor Treating Fields (TTFields) are alternating electric fields in the intermediate frequency range (100-300 kHz) of low-intensity (1-3 V/cm). TTFields are an anti-mitotic treatment against solid tumors, which are approved for Glioblastoma Multiforme (GBM) patients. These electric fields are induced non-invasively by transducer arrays placed directly on the patient's scalp. Cell culture experiments showed that treatment efficacy is dependent on the induced field intensity. In clinical practice, a software called NovoTalTM uses head measurements to estimate the optimal array placement to maximize the electric field delivery to the tumor. Computational studies predict an increase in the tumor's electric field strength when adapting transducer arrays to its location. Ideally, a personalized head model could be created for each patient, to calculate the electric field distribution for the specific situation. Thus, the optimal transducer layout could be inferred from field calculation rather than distance measurements. Nonetheless, creating realistic head models of patients is time-consuming and often needs user interaction, because automated image segmentation is prone to failure. This study presents a first approach to creating simplified head models consisting of convex hulls of the tissue layers. The model is able to account for anisotropic conductivity in the cortical tissues by using a tensor representation estimated from Diffusion Tensor Imaging. The induced electric field distribution is compared in the simplified and realistic head models. The average field intensities in the brain and tumor are generally slightly higher in the realistic head model, with a maximal ratio of 114% for a simplified model with reasonable layer thicknesses. Thus, the present pipeline is a fast and efficient means towards personalized head models with less complexity involved in characterizing tissue interfaces, while enabling accurate predictions of electric field distribution.

Processing of the GALILEO fuel rod code model uncertainties within the AREVA LWR realistic thermal-mechanical analysis methodology

International Nuclear Information System (INIS)

Mailhe, P.; Barbier, B.; Garnier, C.; Landskron, H.; Sedlacek, R.; Arimescu, I.; Smith, M.; Bellanger, P.

2013-01-01

The availability of reliable tools and associated methodology able to accurately predict the LWR fuel behavior in all conditions is of great importance for safe and economic fuel usage. For that purpose, AREVA has developed its new global fuel rod performance code GALILEO along with its associated realistic thermal-mechanical analysis methodology. This realistic methodology is based on a Monte Carlo type random sampling of all relevant input variables. After having outlined the AREVA realistic methodology, this paper will be focused on the GALILEO code benchmarking process, on its extended experimental database and on the GALILEO model uncertainties assessment. The propagation of these model uncertainties through the AREVA realistic methodology is also presented. This GALILEO model uncertainties processing is of the utmost importance for accurate fuel design margin evaluation as illustrated on some application examples. With the submittal of Topical Report GALILEO to the U.S. NRC in 2013, GALILEO and its methodology are on the way to be industrially used in a wide range of irradiation conditions. (authors)

Realistic modelling of the seismic input: Site effects and parametric studies

International Nuclear Information System (INIS)

Romanelli, F.; Vaccari, F.; Panza, G.F.

2002-11-01

We illustrate the work done in the framework of a large international cooperation, showing the very recent numerical experiments carried out within the framework of the EC project 'Advanced methods for assessing the seismic vulnerability of existing motorway bridges' (VAB) to assess the importance of non-synchronous seismic excitation of long structures. The definition of the seismic input at the Warth bridge site, i.e. the determination of the seismic ground motion due to an earthquake with a given magnitude and epicentral distance from the site, has been done following a theoretical approach. In order to perform an accurate and realistic estimate of site effects and of differential motion it is necessary to make a parametric study that takes into account the complex combination of the source and propagation parameters, in realistic geological structures. The computation of a wide set of time histories and spectral information, corresponding to possible seismotectonic scenarios for different sources and structural models, allows us the construction of damage scenarios that are out of the reach of stochastic models, at a very low cost/benefit ratio. (author)

Developing a learning environment on realistic mathematics education for Indonesian student teachers

NARCIS (Netherlands)

Zulkardi, Z.

2002-01-01

The CASCADE-IMEI study was started to explore the role of a learning environment (LE) in assisting mathematics student teachers learning Realistic Mathematics Education (RME) as a new instructional approach in mathematics education in Indonesia. The LE for this study has been developed and evaluated

Fabrication of a set of realistic torso phantoms for calibration of transuranic nuclide lung counting facilities

International Nuclear Information System (INIS)

Griffith, R.V.; Anderson, A.L.; Sundbeck, C.W.; Alderson, S.W.

1983-01-01

A set of 16 tissue equivalent torso phantoms has been fabricated for use by major laboratories involved in counting transuranic nuclides in the lung. These phantoms, which have bone equivalent plastic rib cages, duplicate the performance of the DOE Realistic Phantom set. The new phantoms (and their successors) provide the user laboratories with a highly realistic calibration tool. Moreover, use of these phantoms will allow participating laboratories to intercompare calibration information, both on formal and informal bases. 3 refs., 2 figs

Dynamic Enhanced Inter-Cell Interference Coordination for Realistic Networks

DEFF Research Database (Denmark)

Pedersen, Klaus I.; Alvarez, Beatriz Soret; Barcos, Sonia

2016-01-01

Enhanced Inter-Cell Interference Coordination (eICIC) is a key ingredient to boost the performance of co-channel Heterogeneous Networks (HetNets). eICIC encompasses two main techniques: Almost Blank Subframes (ABS), during which the macro cell remains silent to reduce the interference, and biased...... and an opportunistic approach exploiting the varying cell conditions. Moreover, an autonomous fast distributed muting algorithm is presented, which is simple, robust, and well suited for irregular network deployments. Performance results for realistic network deployments show that the traditional semi-static e...

Realistic Simulation of Rice Plant

Directory of Open Access Journals (Sweden)

Wei-long DING

2011-09-01

Full Text Available The existing research results of virtual modeling of rice plant, however, is far from perfect compared to that of other crops due to its complex structure and growth process. Techniques to visually simulate the architecture of rice plant and its growth process are presented based on the analysis of the morphological characteristics at different stages. Firstly, the simulations of geometrical shape, the bending status and the structural distortion of rice leaves are conducted. Then, by using an improved model for bending deformation, the curved patterns of panicle axis and various types of panicle branches are generated, and the spatial shape of rice panicle is therefore created. Parametric L-system is employed to generate its topological structures, and finite-state automaton is adopted to describe the development of geometrical structures. Finally, the computer visualization of three-dimensional morphologies of rice plant at both organ and individual levels is achieved. The experimental results showed that the proposed methods of modeling the three-dimensional shapes of organs and simulating the growth of rice plant are feasible and effective, and the generated three-dimensional images are realistic.

Active and realistic passive marijuana exposure tested by three immunoassays and GC/MS in urine

International Nuclear Information System (INIS)

Mule, S.J.; Lomax, P.; Gross, S.J.

1988-01-01

Human urine samples obtained before and after active and passive exposure to marijuana were analyzed by immune kits (Roche, Amersham, and Syva) and gas chromatography/mass spectrometry (GC/MS). Seven of eight subjects were positive for the entire five-day test period with one immune kit. The latter correlated with GC/MS in 98% of the samples. Passive inhalation experiments under conditions likely to reflect realistic exposure resulted consistently in less than 10 ng/mL of cannabinoids. The 10-100-ng/mL cannabinoid concentration range essential for detection of occasional and moderate marijuana users is thus unaffected by realistic passive inhalation

Active and realistic passive marijuana exposure tested by three immunoassays and GC/MS in urine

Energy Technology Data Exchange (ETDEWEB)

Mule, S.J.; Lomax, P.; Gross, S.J.

1988-05-01

Human urine samples obtained before and after active and passive exposure to marijuana were analyzed by immune kits (Roche, Amersham, and Syva) and gas chromatography/mass spectrometry (GC/MS). Seven of eight subjects were positive for the entire five-day test period with one immune kit. The latter correlated with GC/MS in 98% of the samples. Passive inhalation experiments under conditions likely to reflect realistic exposure resulted consistently in less than 10 ng/mL of cannabinoids. The 10-100-ng/mL cannabinoid concentration range essential for detection of occasional and moderate marijuana users is thus unaffected by realistic passive inhalation.

Autumn Algorithm-Computation of Hybridization Networks for Realistic Phylogenetic Trees.

Science.gov (United States)

Huson, Daniel H; Linz, Simone

2018-01-01

A minimum hybridization network is a rooted phylogenetic network that displays two given rooted phylogenetic trees using a minimum number of reticulations. Previous mathematical work on their calculation has usually assumed the input trees to be bifurcating, correctly rooted, or that they both contain the same taxa. These assumptions do not hold in biological studies and "realistic" trees have multifurcations, are difficult to root, and rarely contain the same taxa. We present a new algorithm for computing minimum hybridization networks for a given pair of "realistic" rooted phylogenetic trees. We also describe how the algorithm might be used to improve the rooting of the input trees. We introduce the concept of "autumn trees", a nice framework for the formulation of algorithms based on the mathematics of "maximum acyclic agreement forests". While the main computational problem is hard, the run-time depends mainly on how different the given input trees are. In biological studies, where the trees are reasonably similar, our parallel implementation performs well in practice. The algorithm is available in our open source program Dendroscope 3, providing a platform for biologists to explore rooted phylogenetic networks. We demonstrate the utility of the algorithm using several previously studied data sets.

Context problems in realistic mathematics education: A calculus course as an example

NARCIS (Netherlands)

Gravemeijer, K.P.E.; Doorman, L.M.

1999-01-01

This article discusses the role of context problems, as they are used in the Dutch approach that is known as realistic mathematics education (RME). In RME, context problems are intended for supporting a reinvention process that enables students to come to grips with formal mathematics. This approach

Critical reflections on realist review: insights from customizing the methodology to the needs of participatory research assessment.

Science.gov (United States)

Jagosh, Justin; Pluye, Pierre; Wong, Geoff; Cargo, Margaret; Salsberg, Jon; Bush, Paula L; Herbert, Carol P; Green, Lawrence W; Greenhalgh, Trish; Macaulay, Ann C

2014-06-01

Realist review has increased in popularity as a methodology for complex intervention assessment. Our experience suggests that the process of designing a realist review requires its customization to areas under investigation. To elaborate on this idea, we first describe the logic underpinning realist review and then present critical reflections on our application experience, organized in seven areas. These are the following: (1) the challenge of identifying middle range theory; (2) addressing heterogeneity and lack of conceptual clarity; (3) the challenge of appraising the quality of complex evidence; (4) the relevance of capturing unintended outcomes; (5) understanding the process of context, mechanism, and outcome (CMO) configuring; (6) incorporating middle-range theory in the CMO configuration process; and (7) using middle range theory to advance the conceptualization of outcomes - both visible and seemingly 'hidden'. One conclusion from our experience is that the degree of heterogeneity of the evidence base will determine whether theory can drive the development of review protocols from the outset, or will follow only after an intense period of data immersion. We hope that presenting a critical reflection on customizing realist review will convey how the methodology can be tailored to the often complex and idiosyncratic features of health research, leading to innovative evidence syntheses. Copyright © 2013 John Wiley & Sons, Ltd.

Realistic thermodynamic and statistical-mechanical measures for neural synchronization.

Science.gov (United States)

Kim, Sang-Yoon; Lim, Woochang

2014-04-15

Synchronized brain rhythms, associated with diverse cognitive functions, have been observed in electrical recordings of brain activity. Neural synchronization may be well described by using the population-averaged global potential VG in computational neuroscience. The time-averaged fluctuation of VG plays the role of a "thermodynamic" order parameter O used for describing the synchrony-asynchrony transition in neural systems. Population spike synchronization may be well visualized in the raster plot of neural spikes. The degree of neural synchronization seen in the raster plot is well measured in terms of a "statistical-mechanical" spike-based measure Ms introduced by considering the occupation and the pacing patterns of spikes. The global potential VG is also used to give a reference global cycle for the calculation of Ms. Hence, VG becomes an important collective quantity because it is associated with calculation of both O and Ms. However, it is practically difficult to directly get VG in real experiments. To overcome this difficulty, instead of VG, we employ the instantaneous population spike rate (IPSR) which can be obtained in experiments, and develop realistic thermodynamic and statistical-mechanical measures, based on IPSR, to make practical characterization of the neural synchronization in both computational and experimental neuroscience. Particularly, more accurate characterization of weak sparse spike synchronization can be achieved in terms of realistic statistical-mechanical IPSR-based measure, in comparison with the conventional measure based on VG. Copyright © 2014. Published by Elsevier B.V.

HackAttack: Game-Theoretic Analysis of Realistic Cyber Conflicts

Energy Technology Data Exchange (ETDEWEB)

Ferragut, Erik M [ORNL; Brady, Andrew C [Jefferson Middle School, Oak Ridge, TN; Brady, Ethan J [Oak Ridge High School, Oak Ridge, TN; Ferragut, Jacob M [Oak Ridge High School, Oak Ridge, TN; Ferragut, Nathan M [Oak Ridge High School, Oak Ridge, TN; Wildgruber, Max C [ORNL

2016-01-01

Game theory is appropriate for studying cyber conflict because it allows for an intelligent and goal-driven adversary. Applications of game theory have led to a number of results regarding optimal attack and defense strategies. However, the overwhelming majority of applications explore overly simplistic games, often ones in which each participant s actions are visible to every other participant. These simplifications strip away the fundamental properties of real cyber conflicts: probabilistic alerting, hidden actions, unknown opponent capabilities. In this paper, we demonstrate that it is possible to analyze a more realistic game, one in which different resources have different weaknesses, players have different exploits, and moves occur in secrecy, but they can be detected. Certainly, more advanced and complex games are possible, but the game presented here is more realistic than any other game we know of in the scientific literature. While optimal strategies can be found for simpler games using calculus, case-by-case analysis, or, for stochastic games, Q-learning, our more complex game is more naturally analyzed using the same methods used to study other complex games, such as checkers and chess. We define a simple evaluation function and employ multi-step searches to create strategies. We show that such scenarios can be analyzed, and find that in cases of extreme uncertainty, it is often better to ignore one s opponent s possible moves. Furthermore, we show that a simple evaluation function in a complex game can lead to interesting and nuanced strategies.

StackGAN++: Realistic Image Synthesis with Stacked Generative Adversarial Networks

OpenAIRE

Zhang, Han; Xu, Tao; Li, Hongsheng; Zhang, Shaoting; Wang, Xiaogang; Huang, Xiaolei; Metaxas, Dimitris

2017-01-01

Although Generative Adversarial Networks (GANs) have shown remarkable success in various tasks, they still face challenges in generating high quality images. In this paper, we propose Stacked Generative Adversarial Networks (StackGAN) aiming at generating high-resolution photo-realistic images. First, we propose a two-stage generative adversarial network architecture, StackGAN-v1, for text-to-image synthesis. The Stage-I GAN sketches the primitive shape and colors of the object based on given...

Rational versus Emotional Reasoning in a Realistic Multi-Objective Environment

OpenAIRE

Mayboudi, Seyed Mohammad Hossein

2011-01-01

ABSTRACT: Emotional intelligence and its associated with models have recently become one of new active studies in the field of artificial intelligence. Several works have been performed on modelling of emotional behaviours such as love, hate, happiness and sadness. This study presents a comparative evaluation of rational and emotional behaviours and the effects of emotions on the decision making process of agents in a realistic multi-objective environment. NetLogo simulation environment is u...

Capturing and reproducing realistic acoustic scenes for hearing research

DEFF Research Database (Denmark)

Marschall, Marton; Buchholz, Jörg

Accurate spatial audio recordings are important for a range of applications, from the creation of realistic virtual sound environments to the evaluation of communication devices, such as hearing instruments and mobile phones. Spherical microphone arrays are particularly well-suited for capturing....... The properties of MOA microphone layouts and processing were investigated further by considering several order combinations. It was shown that the performance for horizontal vs. elevated sources can be adjusted by varying the order combination, but that a benefit of the higher horizontal orders can only be seen...

On Small Antenna Measurements in a Realistic MIMO Scenario

DEFF Research Database (Denmark)

Yanakiev, Boyan; Nielsen, Jesper Ødum; Pedersen, Gert Frølund

2010-01-01

. The problem using coaxial cable is explained and a solution suitable for long distance channel sounding is presented. A large scale measurement campaign is then described. Special attention is paid to bring the measurement setup as close as possible to a realistic LTE network of the future, with attention......This paper deals with the challenges related to evaluating the performance of multiple, small terminal antennas within a natural MIMO environment. The focus is on the antenna measurement accuracy. First a method is presented for measuring small phone mock-ups, with the use of optical fibers...

Comparative study of the effectiveness of three learning environments: Hyper-realistic virtual simulations, traditional schematic simulations and traditional laboratory

Directory of Open Access Journals (Sweden)

Maria Isabel Suero

2011-10-01

Full Text Available This study compared the educational effects of computer simulations developed in a hyper-realistic virtual environment with the educational effects of either traditional schematic simulations or a traditional optics laboratory. The virtual environment was constructed on the basis of Java applets complemented with a photorealistic visual output. This new virtual environment concept, which we call hyper-realistic, transcends basic schematic simulation; it provides the user with a more realistic perception of a physical phenomenon being simulated. We compared the learning achievements of three equivalent, homogeneous groups of undergraduates—an experimental group who used only the hyper-realistic virtual laboratory, a first control group who used a schematic simulation, and a second control group who used the traditional laboratory. The three groups received the same theoretical preparation and carried out equivalent practicals in their respective learning environments. The topic chosen for the experiment was optical aberrations. An analysis of variance applied to the data of the study demonstrated a statistically significant difference (p value <0.05 between the three groups. The learning achievements attained by the group using the hyper-realistic virtual environment were 6.1 percentage points higher than those for the group using the traditional schematic simulations and 9.5 percentage points higher than those for the group using the traditional laboratory.

Realistic methods for calculating the releases and consequences of a large LOCA

International Nuclear Information System (INIS)

Stephenson, W.; Dutton, L.M.C.; Handy, B.J.; Smedley, C.

1992-01-01

This report describes a calculational route to predict realistic radiological consequences for a successfully terminated large-loss-of-coolant accident (LOCA) at a pressurized-water reactor (PWR). All steps in the calculational route are considered. For each one, a brief comment is made on the significant differences between the methods of calculation that were identified in the benchmark studies and recommendations are made for the methods and data for carrying out realistic calculations. These are based on the best supportable methods and data and the technical basis for each recommendation is given. Where the lack of well-validated methods or data means that the most realistic method that can be justified is considered to be very conservative, the need for further research is identified. The behaviour of inorganic iodine and the removal of aerosols from the atmosphere of the reactor building are identified as areas of particular importance. Where the retention of radioactivity is sensitive to design features, these are identified and, for the most importance features, the impact of different designs on the release of activity is indicated. The predictions of the proposed model are calculated for each stage and compared with the releases of activity predicted by the licensing methods that were used in the earlier benchmark studies. The conservative nature of the latter is confirmed. Methods and data are also presented for calculating the resulting doses to members of the public of the National Radiological Protection Boards as a result of work carried out by several national bodies in the UK. Other, equally acceptable, models are used in other countries of the Community and some examples are given

Microcephaly, microtia, preauricular tags, choanal atresia and developmental delay in three unrelated patients: a mandibulofacial dysostosis distinct from Treacher Collins syndrome.

Science.gov (United States)

Wieczorek, Dagmar; Gener, Blanca; González, Ma Jesús Martínez; Seland, Saskia; Fischer, Sven; Hehr, Ute; Kuechler, Alma; Hoefsloot, Lies H; de Leeuw, Nicole; Gillessen-Kaesbach, Gabriele; Lohmann, Dietmar R

2009-05-01

Treacher Collins syndrome (TCS, OMIM 154500) is a well-defined mandibulofacial dysostosis characterized by symmetric facial anomalies consisting of malar hypoplasia, coloboma of the lower eyelid, dysplastic ears, micrognathia, cleft palate and deafness. Other mandibulofacial dysostoses (MDs) such as Toriello (OMIM 301950), Bauru (OMIM 604830), Hedera-Toriello-Petty (OMIM 608257), and Guion-Almeida (OMIM 610536) syndromes are less well characterized and much rarer. Here we describe three unrelated patients showing clinical features overlapping with TCS, but who in addition have developmental delay, microcephaly and a distinct facial gestalt. Because of the distinct ear anomalies and the hearing loss a HOXA2 mutation was taken into account. CHARGE syndrome was discussed because of ear anomalies, choanal atresia, and developmental delay in our patients. But mutational analyses including sequencing of the TCOF1, the HOXA2, and the CHD7 genes, deletion screening of the TCOF1 gene as well as genomewide array analyses revealed normal results. We suggest that these three patients have a new type of mandibulofacial dysostosis. As all three cases are sporadic and both sexes are affected the pattern of inheritance might be autosomal dominant or autosomal recessive. Identification of additional patients will allow to further delineate the phenotype, to assign the inheritance pattern and to identify the molecular basis.

What works for whom in pharmacist-led smoking cessation support: realist review.

Science.gov (United States)

Greenhalgh, Trisha; Macfarlane, Fraser; Steed, Liz; Walton, Robert

2016-12-16

New models of primary care are needed to address funding and staffing pressures. We addressed the research question "what works for whom in what circumstances in relation to the role of community pharmacies in providing lifestyle interventions to support smoking cessation?" This is a realist review conducted according to RAMESES standards. We began with a sample of 103 papers included in a quantitative review of community pharmacy intervention trials identified through systematic searching of seven databases. We supplemented this with additional papers: studies that had been excluded from the quantitative review but which provided rigorous and relevant additional data for realist theorising; citation chaining (pursuing reference lists and Google Scholar forward tracking of key papers); the 'search similar citations' function on PubMed. After mapping what research questions had been addressed by these studies and how, we undertook a realist analysis to identify and refine candidate theories about context-mechanism-outcome configurations. Our final sample consisted of 66 papers describing 74 studies (12 systematic reviews, 6 narrative reviews, 18 RCTs, 1 process detail of a RCT, 1 cost-effectiveness study, 12 evaluations of training, 10 surveys, 8 qualitative studies, 2 case studies, 2 business models, 1 development of complex intervention). Most studies had been undertaken in the field of pharmacy practice (pharmacists studying what pharmacists do) and demonstrated the success of pharmacist training in improving confidence, knowledge and (in many but not all studies) patient outcomes. Whilst a few empirical studies had applied psychological theories to account for behaviour change in pharmacists or people attempting to quit, we found no studies that had either developed or tested specific theoretical models to explore how pharmacists' behaviour may be affected by organisational context. Because of the nature of the empirical data, only a provisional realist analysis

Realistic versus Schematic Interactive Visualizations for Learning Surveying Practices: A Comparative Study

Science.gov (United States)

Dib, Hazar; Adamo-Villani, Nicoletta; Garver, Stephen

2014-01-01

Many benefits have been claimed for visualizations, a general assumption being that learning is facilitated. However, several researchers argue that little is known about the cognitive value of graphical representations, be they schematic visualizations, such as diagrams or more realistic, such as virtual reality. The study reported in the paper…

The tenants in the vineyard (GThom 65/Mark 12:1-12): A realistic ...

African Journals Online (AJOL)

p1243322

understanding and his own realistic reading of the Wirkungsgeschichte of the ...... maximize the quality of the wine, while the tenants' interest was to harvest the grapes later in ..... appreciation of that person in the eyes of others (i. e., claim and.

Realistic electrostatic potentials in a neutron star crust

International Nuclear Information System (INIS)

Ebel, Claudio; Mishustin, Igor; Greiner, Walter

2015-01-01

We study the electrostatic properties of inhomogeneous nuclear matter which can be formed in the crusts of neutron stars or in supernova explosions. Such matter is represented by Wigner–Seitz cells of different geometries (spherical, cylindrical, cartesian), which contain nuclei, free neutrons and electrons under the conditions of electrical neutrality. Using the Thomas–Fermi approximation, we have solved the Poisson equation for the electrostatic potential and calculated the corresponding electron density distributions in individual cells. The calculations are done for different shapes and sizes of the cells and different average baryon densities. The electron-to-baryon fraction was fixed at 0.3. Using realistic electron distributions leads to a significant reduction in electrostatic energy and electron chemical potential. (paper)

Satisfaction and sustainability: a realist review of decentralized models of perinatal surgery for rural women.

Science.gov (United States)

Kornelsen, Jude; McCartney, Kevin; Williams, Kim

2016-01-01

This article was developed as part of a larger realist review investigating the viability and efficacy of decentralized models of perinatal surgical services for rural women in the context of recent and ongoing service centralization witnessed in many developed nations. The larger realist review was commissioned by the British Columbia Ministry of Health and Perinatal Services of British Columbia, Canada. Findings from that review are addressed in this article specific to the sustainability of rural perinatal surgical sites and the satisfaction of providers that underpins their recruitment to and retention at such sites. A realist method was used in the selection and analysis of literature with the intention to iteratively develop a sophisticated understanding of how perinatal surgical services can best meet the needs of women who live in rural and remote environments. The goal of a realist review is to examine what works for whom under what circumstances and why. The high sensitivity search used language (English) and year (since 1990) limiters in keeping with both a realist and rapid review tradition of using reasoned contextual boundaries. No exclusions were made based on methodology or methodological approach in keeping with a realist review. Databases searched included MEDLINE, PubMed, EBSCO, CINAHL, EBM Reviews, NHS Economic Evaluation Database and PAIS International for literature in December 2013. Database searching produced 103 included academic articles. A further 59 resources were added through pearling and 13 grey literature reports were added on recommendation from the commissioner. A total of 42 of these 175 articles were included in this article as specific to provider satisfaction and service sustainability. Operative perinatal practice was found to be a lynchpin of sustainable primary and surgical services in rural communities. Rural shortages of providers, including challenges with recruitment and retention, were found to be a complex issue, with

Development of vortex model with realistic axial velocity distribution

International Nuclear Information System (INIS)

Ito, Kei; Ezure, Toshiki; Ohshima, Hiroyuki

2014-01-01

A vortex is considered as one of significant phenomena which may cause gas entrainment (GE) and/or vortex cavitation in sodium-cooled fast reactors. In our past studies, the vortex is assumed to be approximated by the well-known Burgers vortex model. However, the Burgers vortex model has a simple but unreal assumption that the axial velocity component is horizontally constant, while in real the free surface vortex has the axial velocity distribution which shows large gradient in radial direction near the vortex center. In this study, a new vortex model with realistic axial velocity distribution is proposed. This model is derived from the steady axisymmetric Navier-Stokes equation as well as the Burgers vortex model, but the realistic axial velocity distribution in radial direction is considered, which is defined to be zero at the vortex center and to approach asymptotically to zero at infinity. As the verification, the new vortex model is applied to the evaluation of a simple vortex experiment, and shows good agreements with the experimental data in terms of the circumferential velocity distribution and the free surface shape. In addition, it is confirmed that the Burgers vortex model fails to calculate accurate velocity distribution with the assumption of uniform axial velocity. However, the calculation accuracy of the Burgers vortex model can be enhanced close to that of the new vortex model in consideration of the effective axial velocity which is calculated as the average value only in the vicinity of the vortex center. (author)

Evaluating impact of clinical guidelines using a realist evaluation framework.

Science.gov (United States)

Reddy, Sandeep; Wakerman, John; Westhorp, Gill; Herring, Sally

2015-12-01

The Remote Primary Health Care Manuals (RPHCM) project team manages the development and publication of clinical protocols and procedures for primary care clinicians practicing in remote Australia. The Central Australian Rural Practitioners Association Standard Treatment Manual, the flagship manual of the RPHCM suite, has been evaluated for accessibility and acceptability in remote clinics three times in its 20-year history. These evaluations did not consider a theory-based framework or a programme theory, resulting in some limitations with the evaluation findings. With the RPHCM having an aim of enabling evidence-based practice in remote clinics and anecdotally reported to do so, testing this empirically for the full suite is vital for both stakeholders and future editions of the RPHCM. The project team utilized a realist evaluation framework to assess how, why and for what the RPHCM were being used by remote practitioners. A theory regarding the circumstances in which the manuals have and have not enabled evidence-based practice in the remote clinical context was tested. The project assessed this theory for all the manuals in the RPHCM suite, across government and aboriginal community-controlled clinics, in three regions of Australia. Implementing a realist evaluation framework to generate robust findings in this context has required innovation in the evaluation design and adaptation by researchers. This article captures the RPHCM team's experience in designing this evaluation. © 2015 John Wiley & Sons, Ltd.

Realistic modeling of seismic input for megacities and large urban areas

International Nuclear Information System (INIS)

Panza, Giuliano F.; Alvarez, Leonardo; Aoudia, Abdelkrim

2002-06-01

The project addressed the problem of pre-disaster orientation: hazard prediction, risk assessment, and hazard mapping, in connection with seismic activity and man-induced vibrations. The definition of realistic seismic input has been obtained from the computation of a wide set of time histories and spectral information, corresponding to possible seismotectonic scenarios for different source and structural models. The innovative modeling technique, that constitutes the common tool to the entire project, takes into account source, propagation and local site effects. This is done using first principles of physics about wave generation and propagation in complex media, and does not require to resort to convolutive approaches, that have been proven to be quite unreliable, mainly when dealing with complex geological structures, the most interesting from the practical point of view. In fact, several techniques that have been proposed to empirically estimate the site effects using observations convolved with theoretically computed signals corresponding to simplified models, supply reliable information about the site response to non-interfering seismic phases. They are not adequate in most of the real cases, when the seismic sequel is formed by several interfering waves. The availability of realistic numerical simulations enables us to reliably estimate the amplification effects even in complex geological structures, exploiting the available geotechnical, lithological, geophysical parameters, topography of the medium, tectonic, historical, palaeoseismological data, and seismotectonic models. The realistic modeling of the ground motion is a very important base of knowledge for the preparation of groundshaking scenarios that represent a valid and economic tool for the seismic microzonation. This knowledge can be very fruitfully used by civil engineers in the design of new seismo-resistant constructions and in the reinforcement of the existing built environment, and, therefore

Improvements on a simple muscle-based 3D face for realistic facial expressions

NARCIS (Netherlands)

Bui, T.D.; Heylen, Dirk K.J.; Nijholt, Antinus; Badler, N.; Thalmann, D.

2003-01-01

Facial expressions play an important role in face-to-face communication. With the development of personal computers capable of rendering high quality graphics, computer facial animation has produced more and more realistic facial expressions to enrich human-computer communication. In this paper, we

A continuous family of realistic SUSY SU(5) GUTs

Energy Technology Data Exchange (ETDEWEB)

Bajc, Borut, E-mail: borut.bajc@ijs.si [J. Stefan Institute, Jamova cesta 39, 1000, Ljubljana (Slovenia)

2016-06-21

It is shown that the minimal renormalizable supersymmetric SU(5) is still realistic providing the supersymmetric scale is at least few tens of TeV or large R-parity violating terms are considered. In the first case the vacuum is metastable, and different consistency constraints can give a bounded allowed region in the tan β − m{sub susy} plane. In the second case the mass eigenstate electron (down quark) is a linear combination of the original electron (down quark) and Higgsino (heavy colour triplet), and the mass ratio of bino and wino is determined. Both limits lead to light gravitino dark matter.

Exophobic Quasi-Realistic Heterotic String Vacua

CERN Document Server

Assel, Benjamin; Faraggi, Alon E; Kounnas, Costas; Rizos, John

2009-01-01

We demonstrate the existence of heterotic-string vacua that are free of massless exotic fields. The need to break the non-Abelian GUT symmetries in k=1 heterotic-string models by Wilson lines, while preserving the GUT embedding of the weak-hypercharge and the GUT prediction sin^2\\theta_w(M(GUT))=3/8, necessarily implies that the models contain states with fractional electric charge. Such states are severely restricted by observations, and must be confined or sufficiently massive and diluted. We construct the first quasi-realistic heterotic-string models in which the exotic states do not appear in the massless spectrum, and only exist, as they must, in the massive spectrum. The SO(10) GUT symmetry is broken to the Pati-Salam subgroup. Our PS heterotic-string models contain adequate Higgs representations to break the GUT and electroweak symmetry, as well as colour Higgs triplets that can be used for the missing partner mechanism. By statistically sampling the space of Pati-Salam vacua we demonstrate the abundan...

CASCADE-IMEI: A learning environment of realistic mathematics for student teachers in Indonesia

NARCIS (Netherlands)

Zulkardi, Z.; Nieveen, N.M.

2001-01-01

This paper reports on the second phase of a four-year study which aims to develop a learning environment that supports prospective mathematics teachers learning realistic mathematics education (RME) in teacher education in Indonesia. The results suggest that by giving student teachers experiences in

A Local Realistic Reconciliation of the EPR Paradox

Science.gov (United States)

Sanctuary, Bryan

2014-03-01

The exact violation of Bell's Inequalities is obtained with a local realistic model for spin. The model treats one particle that comprises a quantum ensemble and simulates the EPR data one coincidence at a time as a product state. Such a spin is represented by operators σx , iσy ,σz in its body frame rather than the usual set of σX ,σY ,σZ in the laboratory frame. This model, assumed valid in the absence of a measuring probe, contains both quantum polarizations and coherences. Each carries half the EPR correlation, but only half can be measured using coincidence techniques. The model further predicts the filter angles that maximize the spin correlation in EPR experiments.

HELIOSEISMOLOGY OF A REALISTIC MAGNETOCONVECTIVE SUNSPOT SIMULATION

International Nuclear Information System (INIS)

Braun, D. C.; Birch, A. C.; Rempel, M.; Duvall, T. L. Jr.

2012-01-01

We compare helioseismic travel-time shifts measured from a realistic magnetoconvective sunspot simulation using both helioseismic holography and time-distance helioseismology, and measured from real sunspots observed with the Helioseismic and Magnetic Imager instrument on board the Solar Dynamics Observatory and the Michelson Doppler Imager instrument on board the Solar and Heliospheric Observatory. We find remarkable similarities in the travel-time shifts measured between the methodologies applied and between the simulated and real sunspots. Forward modeling of the travel-time shifts using either Born or ray approximation kernels and the sound-speed perturbations present in the simulation indicates major disagreements with the measured travel-time shifts. These findings do not substantially change with the application of a correction for the reduction of wave amplitudes in the simulated and real sunspots. Overall, our findings demonstrate the need for new methods for inferring the subsurface structure of sunspots through helioseismic inversions.

Basicladia chelonum (Collins W.E. Hoffmann et Tilden (Chlorophyta, Cladophorophyceae from Cuba (Caribbean: new observation of the ultrastructure of its vegetative cells

Directory of Open Access Journals (Sweden)

Joanna Czerwik-Marcinkowska

2011-01-01

Full Text Available Basicladia chelonum (Collins W.E. Hoffmann and Tilden (1930 principally known from North America and Hawaii was recently (2004 found in Cuba (Caribbean from artificial pool growing on shells of musk turtles (Trachemys decussata Gray. Specimens collected in Cuba were subjected to detailed examinations also using a transmission electron microscope. On one hand, these studies confirmed many features of this species previously described by earlier authors in the specimens from Texas. On the other hand, the present studies revealed structures unknown so far (pyrenoid structure, which allowed for new analysis of this species. These investigations also have shown that Basicladia chelonum exhibits close similarity to the genus Cladophora and other representatives of the class Cladophorophyceae. The similarities include : siphonocladous level of organization of thallus, numerous chloroplasts forming a network and other structures. Conversely, the pyrenoid in vegetative cells of Basicladia chelonum distinguishes it markedly from representatives of the genus Cladophora, which have bilenticular pyrenoids divided into two hemispheres by a single thylakoids and each hemisphere is covered by a bowlshaped starch grain (Van Hoek et al. 1995. Since in Cladophora the ultrastructure of the pyrenoid is highly constant and characteristic, this contrasts with the genus Basicladia and, therefore, more firmly establishes position of the latter as an independent unit within Cladophorophyceae.

Realist identification of group-level latent variables for perinatal social epidemiology theory building.

Science.gov (United States)

Eastwood, John Graeme; Jalaludin, Bin Badrudin; Kemp, Lynn Ann; Phung, Hai Ngoc

2014-01-01

We have previously reported in this journal on an ecological study of perinatal depressive symptoms in South Western Sydney. In that article, we briefly reported on a factor analysis that was utilized to identify empirical indicators for analysis. In this article, we report on the mixed method approach that was used to identify those latent variables. Social epidemiology has been slow to embrace a latent variable approach to the study of social, political, economic, and cultural structures and mechanisms, partly for philosophical reasons. Critical realist ontology and epistemology have been advocated as an appropriate methodological approach to both theory building and theory testing in the health sciences. We describe here an emergent mixed method approach that uses qualitative methods to identify latent constructs followed by factor analysis using empirical indicators chosen to measure identified qualitative codes. Comparative analysis of the findings is reported together with a limited description of realist approaches to abstract reasoning.

Design principles and optimal performance for molecular motors under realistic constraints

Science.gov (United States)

Tu, Yuhai; Cao, Yuansheng

2018-02-01

The performance of a molecular motor, characterized by its power output and energy efficiency, is investigated in the motor design space spanned by the stepping rate function and the motor-track interaction potential. Analytic results and simulations show that a gating mechanism that restricts forward stepping in a narrow window in configuration space is needed for generating high power at physiologically relevant loads. By deriving general thermodynamics laws for nonequilibrium motors, we find that the maximum torque (force) at stall is less than its theoretical limit for any realistic motor-track interactions due to speed fluctuations. Our study reveals a tradeoff for the motor-track interaction: while a strong interaction generates a high power output for forward steps, it also leads to a higher probability of wasteful spontaneous back steps. Our analysis and simulations show that this tradeoff sets a fundamental limit to the maximum motor efficiency in the presence of spontaneous back steps, i.e., loose-coupling. Balancing this tradeoff leads to an optimal design of the motor-track interaction for achieving a maximum efficiency close to 1 for realistic motors that are not perfectly coupled with the energy source. Comparison with existing data and suggestions for future experiments are discussed.

Effect of realistic and filtered stellar photometric noise on the detection of moons using photometric transit timing

Directory of Open Access Journals (Sweden)

Lewis K.

2011-02-01

Full Text Available The photometric transit timing technique was proposed by Szabó et al. (2006 as a method for discovering moons of transiting extrasolar planets. In the preliminary analysis of this technique, it was assumed that the noise in the transit lightcurve was well described by uncorrelated white noise. However, this assumption is not necessarily realistic. To determine the effect of using more realistic lightcurves, transit timing uncertainties are calculated for the case of white noise, measured solar photometric noise and measured solar photometric noise that has been filtered. It is found that for light curves contaminated with realistic photometric noise, the transit timing uncertainties are dramatically increased (and thus moon detection reduced. In addition, we find that while filtering reduced this problem, it did not negate it.

Hemodynamic Changes Caused by Flow Diverters in Rabbit Aneurysm Models: Comparison of Virtual and Realistic FD Deployments Based on Micro-CT Reconstruction

Science.gov (United States)

Fang, Yibin; Yu, Ying; Cheng, Jiyong; Wang, Shengzhang; Wang, Kuizhong; Liu, Jian-Min; Huang, Qinghai

2013-01-01

Adjusting hemodynamics via flow diverter (FD) implantation is emerging as a novel method of treating cerebral aneurysms. However, most previous FD-related hemodynamic studies were based on virtual FD deployment, which may produce different hemodynamic outcomes than realistic (in vivo) FD deployment. We compared hemodynamics between virtual FD and realistic FD deployments in rabbit aneurysm models using computational fluid dynamics (CFD) simulations. FDs were implanted for aneurysms in 14 rabbits. Vascular models based on rabbit-specific angiograms were reconstructed for CFD studies. Real FD configurations were reconstructed based on micro-CT scans after sacrifice, while virtual FD configurations were constructed with SolidWorks software. Hemodynamic parameters before and after FD deployment were analyzed. According to the metal coverage (MC) of implanted FDs calculated based on micro-CT reconstruction, 14 rabbits were divided into two groups (A, MC >35%; B, MC 0.05). The normalized mean WSS in Group A after realistic FD implantation was significantly lower than that of Group B. All parameters in Group B exhibited no significant difference between realistic and virtual FDs. This study confirmed MC-correlated differences in hemodynamic parameters between realistic and virtual FD deployment. PMID:23823503

Machine Learning for RealisticBall Detection in RoboCup SPL

OpenAIRE

Bloisi, Domenico; Del Duchetto, Francesco; Manoni, Tiziano; Suriani, Vincenzo

2017-01-01

In this technical report, we describe the use of a machine learning approach for detecting the realistic black and white ball currently in use in the RoboCup Standard Platform League. Our aim is to provide a ready-to-use software module that can be useful for the RoboCup SPL community. To this end, the approach is integrated within the official B-Human code release 2016. The complete code for the approach presented in this work can be downloaded from the SPQR Team homepage at http://spqr.diag...

The effects of crystallization and residual glass on the chemical durability of iron phosphate waste forms containing 40 wt% of a high MoO3 Collins-CLT waste

Science.gov (United States)

Hsu, Jen-Hsien; Bai, Jincheng; Kim, Cheol-Woon; Brow, Richard K.; Szabo, Joe; Zervos, Adam

2018-03-01

The effects of cooling rate on the chemical durability of iron phosphate waste forms containing up to 40 wt% of a high MoO3 Collins-CLT waste simulant were determined at 90 °C using the product consistency test (PCT). The waste form, designated 40wt%-5, meets appropriate Department of Energy (DOE) standards when rapidly quenched from the melt (as-cast) and after slow cooling following the CCC (canister centerline cooling)-protocol, although the quenched glass is more durable. The analysis of samples from the vapor hydration test (VHT) and the aqueous corrosion test (differential recession test) reveals that rare earth orthophosphate (monazite) and Zr-pyrophosphate crystals that form on cooling are more durable than the residual glass in the 40wt%-5 waste form. The residual glass in the CCC-treated samples has a greater average phosphate chain length and a lower Fe/P ratio, and those contribute to its faster corrosion kinetics.

Students’ Critical Mathematical Thinking Skills and Character:Experiments for Junior High School Students through Realistic Mathematics Education Culture-Based

Directory of Open Access Journals (Sweden)

Anderson L. Palinussa

2013-01-01

Full Text Available This paper presents the findings of a quasi-experimental with pre-test-post-test design and control group that aims to assess students’ critical mathematical thinking skills and character through realistic mathematics education (RME culture-based. Subjects of this study were 106 junior high school students from two low and medium schools level in Ambon. The instruments of the study are: students’ early math skills test, critical thinking skills mathematical test and perception scale of students’character. Data was analyzed by using t-test and Anova. The study found that: 1 Achievements and enhancement of students’ critical mathematical thinking skills who were treated with by realistic mathematics education is better then students’ skills were treated by conventional mathematics education. The differences are considered to: a overall students, b the level of early math skills, and c schools’ level; 2 Quality of students’ character who were treated by realistic mathematics education is better then students’ character who were treated by conventional mathematics education The differences are considered to: a overall students, b the level of early math skills, and c schools’ level  Keywords: Critical Thinking, Students’ Character, Realistic Mathematics Education Culture-Based DOI: http://dx.doi.org/10.22342/jme.4.1.566.75-94

Methodology for estimating realistic responses of buildings and components under earthquake motion and its application

International Nuclear Information System (INIS)

Ebisawa, Katsumi; Abe, Kiyoharu; Kohno, Kunihiko; Nakamura, Hidetaka; Itoh, Mamoru.

1996-11-01

Failure probabilities of buildings and components under earthquake motion are estimated as conditional probabilities that their realistic responses exceed their capacities. Two methods for estimating their failure probabilities have already been developed. One is a detailed method developed in the Seismic Safety margins Research Program of Lawrence Livermore National Laboratory in U.S.A., which is called 'SSMRP method'. The other is a simplified method proposed by Kennedy et al., which is called 'Zion method'. The Zion method is sometimes called 'response factor method'. The authors adopted the response factor method. In order to enhance the estimation accuracy of failure probabilities of buildings and components, however, a new methodology for improving the response factor method was proposed. Based on the improved method, response factors of buildings and components designed to seismic design standard in Japan were estimated, and their realistic responses were also calculated. By using their realistic responses and capacities, the failure probabilities of a reactor building and relays were estimated. In order to identify the difference between new method, SSMRP method and original response factor method, the failure probabilities were compared estimated by these three methods. A similar method of SSMRP was used instead of the original SSMRP for saving time and labor. The viewpoints for selecting the methods to estimate failure probabilities of buildings and components were also proposed. (author). 55 refs

Lean and leadership practices: development of an initial realist program theory.

Science.gov (United States)

Goodridge, Donna; Westhorp, Gill; Rotter, Thomas; Dobson, Roy; Bath, Brenna

2015-09-07

Lean as a management system has been increasingly adopted in health care settings in an effort to enhance quality, capacity and safety, while simultaneously containing or reducing costs. The Ministry of Health in the province of Saskatchewan, Canada has made a multi-million dollar investment in Lean initiatives to create "better health, better value, better care, and better teams", affording a unique opportunity to advance our understanding of the way in which Lean philosophy, principles and tools work in health care. In order to address the questions, "What changes in leadership practices are associated with the implementation of Lean?" and "When leadership practices change, how do the changed practices contribute to subsequent outcomes?", we used a qualitative, multi-stage approach to work towards developing an initial realist program theory. We describe the implications of realist assumptions for evaluation of this Lean initiative. Formal theories including Normalization Process Theory, Theories of Double Loop and Organization Leaning and the Theory of Cognitive Dissonance help understand this initial rough program theory. Data collection included: key informant consultation; a stakeholder workshop; documentary review; 26 audiotaped and transcribed interviews with health region personnel; and team discussions. A set of seven initial hypotheses regarding the manner in which Lean changes leadership practices were developed from our data. We hypothesized that Lean, as implemented in this particular setting, changes leadership practices in the following ways. Lean: a) aligns the aims and objectives of health regions; b) authorizes attention and resources to quality improvement and change management c) provides an integrated set of tools for particular tasks; d) changes leaders' attitudes or beliefs about appropriate leadership and management styles and behaviors; e) demands increased levels of expertise, accountability and commitment from leaders; f) measures and

Detailed performance analysis of realistic solar photovoltaic systems at extensive climatic conditions

International Nuclear Information System (INIS)

Gupta, Ankit; Chauhan, Yogesh K.

2016-01-01

In recent years, solar energy has been considered as one of the principle renewable energy source for electric power generation. In this paper, single diode photovoltaic (PV) system and double/bypass diode based PV system are designed in MATLAB/Simulink environment based on their mathematical modeling and are validated with a commercially available solar panel. The novelty of the paper is to include the effect of climatic conditions i.e. variable irradiation level, wind speed, temperature, humidity level and dust accumulation in the modeling of both the PV systems to represent a realistic PV system. The comprehensive investigations are made on both the modeled PV systems. The obtained results show the satisfactory performance for realistic models of the PV system. Furthermore, an in depth comparative analysis is carried out for both PV systems. - Highlights: • Modeling of Single diode and Double diode PV systems in MATLAB/Simulink software. • Validation of designed PV systems with a commercially available PV panel. • Acquisition and employment of key climatic factors in modeling of the PV systems. • Evaluation of main model parameters of both the PV systems. • Detailed comparative assessment of both the modeled PV system parameters.

Simplicity of state and overlap structure in finite-volume realistic spin glasses

International Nuclear Information System (INIS)

Newman, C.M.; Stein, D.L.

1998-01-01

We present a combination of heuristic and rigorous arguments indicating that both the pure state structure and the overlap structure of realistic spin glasses should be relatively simple: in a large finite volume with coupling-independent boundary conditions, such as periodic, at most a pair of flip-related (or the appropriate number of symmetry-related in the non-Ising case) states appear, and the Parisi overlap distribution correspondingly exhibits at most a pair of δ functions at ±q EA . This rules out the nonstandard mean-field picture introduced by us earlier, and when combined with our previous elimination of more standard versions of the mean-field picture, argues against the possibility of even limited versions of mean-field ordering in realistic spin glasses. If broken spin-flip symmetry should occur, this leaves open two main possibilities for ordering in the spin glass phase: the droplet-scaling two-state picture, and the chaotic pairs many-state picture introduced by us earlier. We present scaling arguments which provide a possible physical basis for the latter picture, and discuss possible reasons behind numerical observations of more complicated overlap structures in finite volumes. copyright 1998 The American Physical Society

Robust mode space approach for atomistic modeling of realistically large nanowire transistors

Science.gov (United States)

Huang, Jun Z.; Ilatikhameneh, Hesameddin; Povolotskyi, Michael; Klimeck, Gerhard

2018-01-01

Nanoelectronic transistors have reached 3D length scales in which the number of atoms is countable. Truly atomistic device representations are needed to capture the essential functionalities of the devices. Atomistic quantum transport simulations of realistically extended devices are, however, computationally very demanding. The widely used mode space (MS) approach can significantly reduce the numerical cost, but a good MS basis is usually very hard to obtain for atomistic full-band models. In this work, a robust and parallel algorithm is developed to optimize the MS basis for atomistic nanowires. This enables engineering-level, reliable tight binding non-equilibrium Green's function simulation of nanowire metal-oxide-semiconductor field-effect transistor (MOSFET) with a realistic cross section of 10 nm × 10 nm using a small computer cluster. This approach is applied to compare the performance of InGaAs and Si nanowire n-type MOSFETs (nMOSFETs) with various channel lengths and cross sections. Simulation results with full-band accuracy indicate that InGaAs nanowire nMOSFETs have no drive current advantage over their Si counterparts for cross sections up to about 10 nm × 10 nm.

Realistic Scheduling Mechanism for Smart Homes

Directory of Open Access Journals (Sweden)

Danish Mahmood

2016-03-01

Full Text Available In this work, we propose a Realistic Scheduling Mechanism (RSM to reduce user frustration and enhance appliance utility by classifying appliances with respective constraints and their time of use effectively. Algorithms are proposed regarding functioning of home appliances. A 24 hour time slot is divided into four logical sub-time slots, each composed of 360 min or 6 h. In these sub-time slots, only desired appliances (with respect to appliance classification are scheduled to raise appliance utility, restricting power consumption by a dynamically modelled power usage limiter that does not only take the electricity consumer into account but also the electricity supplier. Once appliance, time and power usage limiter modelling is done, we use a nature-inspired heuristic algorithm, Binary Particle Swarm Optimization (BPSO, optimally to form schedules with given constraints representing each sub-time slot. These schedules tend to achieve an equilibrium amongst appliance utility and cost effectiveness. For validation of the proposed RSM, we provide a comparative analysis amongst unscheduled electrical load usage, scheduled directly by BPSO and RSM, reflecting user comfort, which is based upon cost effectiveness and appliance utility.

Statistical multi-path exposure method for assessing the whole-body SAR in a heterogeneous human body model in a realistic environment.

Science.gov (United States)

Vermeeren, Günter; Joseph, Wout; Martens, Luc

2013-04-01

Assessing the whole-body absorption in a human in a realistic environment requires a statistical approach covering all possible exposure situations. This article describes the development of a statistical multi-path exposure method for heterogeneous realistic human body models. The method is applied for the 6-year-old Virtual Family boy (VFB) exposed to the GSM downlink at 950 MHz. It is shown that the whole-body SAR does not differ significantly over the different environments at an operating frequency of 950 MHz. Furthermore, the whole-body SAR in the VFB for multi-path exposure exceeds the whole-body SAR for worst-case single-incident plane wave exposure by 3.6%. Moreover, the ICNIRP reference levels are not conservative with the basic restrictions in 0.3% of the exposure samples for the VFB at the GSM downlink of 950 MHz. The homogeneous spheroid with the dielectric properties of the head suggested by the IEC underestimates the absorption compared to realistic human body models. Moreover, the variation in the whole-body SAR for realistic human body models is larger than for homogeneous spheroid models. This is mainly due to the heterogeneity of the tissues and the irregular shape of the realistic human body model compared to homogeneous spheroid human body models. Copyright © 2012 Wiley Periodicals, Inc.

Mean-Field and RPA Approaches to Stable and Unstable Nuclei with Semi-Realistic Interactions

International Nuclear Information System (INIS)

Nakada, H.

2009-01-01

We have developed semi-realistic NN interactions [1, 2] by modifying the M3Y interaction [3] that was derived from the G-matrix. The modification has been made so that the saturation and the spin-orbit splittings could be reproduced. The new interactions contain finite-range LS and tensor channels, as well as Yukawa-form central channels having reasonable spin and spin-isospin properties. In order to handle such interactions in practical calculations, we have also developed new numerical methods [4-6], in which the Gaussian expansion method [7] is applied. It is noted that these methods have the following advantages: (i) we can efficiently describe the energy-dependent asymptotics of single-particle wave functions at large r, as is typified in arguments on the deformed neutron halo in 4 0M g [6], (ii) we can handle various effective interactions, including those having non-locality, and (iii) a single-set of bases is applicable to wide mass range of nuclei and therefore is suitable to systematic calculations. Thereby we can implement Hartree-Fock, Hartree-Fock-Bogolyubov and RPA calculations for stable and unstable nuclei with the semi-realistic interactions. It will be shown first that the new interactions have desired characters for the nuclear matter and for the single- and double-closed nuclei. We shall particularly focus on roles of specific channels of the effective interaction, by studying (a) 'shell evolution' and role of the spin-isospin and the tensor channels [8] in stable and unstable nuclei, and (b) the magnetic response in a fully self-consistent RPA calculation with the tensor force [9]. All these properties seem to be simultaneously and naturally reproduced by the semi-realistic interactions. Thus the semi-realistic interactions are promising in describing various aspects of nuclear structure from stable to drip-line nuclei, in a self-consistent and unified manner. Since they have microscopic origin with minimal modification, we can expect high

Evolutionary Debunking of Normative Realism. Not a Real Threat for Realists

OpenAIRE

Pellegrino, Gianfranco

2017-01-01

A debunking argument has been recently levelled against normative realism. According to this line of reasoning, most of our normative beliefs have been strongly influenced by evolutionary forces. As evolution is a non-truth-tracking process, this influence may lead our normative beliefs off track. If so, normative realists need to provide an explanation of how it is possible that our normative beliefs track stance-independent truth, or of how their falsity could be spotted, when evolution pow...

Transport properties in a monolayer graphene modulated by the realistic magnetic field and the Schottky metal stripe

Science.gov (United States)

Lu, Jian-Duo; Li, Yun-Bao; Liu, Hong-Yu; Peng, Shun-Jin; Zhao, Fei-Xiang

2016-09-01

Based on the transfer-matrix method, a systematic investigation of electron transport properties is done in a monolayer graphene modulated by the realistic magnetic field and the Schottky metal stripe. The strong dependence of the electron transmission and the conductance on the incident angle of carriers is clearly seen. The height, position as well as width of the barrier also play an important role on the electron transport properties. These interesting results are very useful for understanding the tunneling mechanism in the monolayer graphene and helpful for designing the graphene-based electrical device modulated by the realistic magnetic field and the electrical barrier.

Assessing Outcomes of a Realistic Major Preview in an Introductory Sport Management Course

Science.gov (United States)

Pierce, David; Wanless, Elizabeth; Johnson, James

2014-01-01

This paper assessed the outcomes of a field experience assignment (FEA) in an introductory sport management course designed as a realistic major preview. Student learning outcomes assessed were commitment to the major, intent to pursue the major, expectation of a career in sports, and perceived preparation for a career in sports. A…

Transforming the patient care environment with Lean Six Sigma and realistic evaluation.

Science.gov (United States)

Black, Jason

2009-01-01

Lean Six Sigma (LSS) is a structured methodology for transforming processes, but it does not fully consider the complex social interactions that cause processes to form in hospital organizations. By combining LSS implementations with the concept of Realistic Evaluation, a methodology that promotes change by assessing and considering the individual characteristics of an organization's social environment, successful and sustainable process improvement is more likely.

Do absorption and realistic distraction influence performance of component task surgical procedure?

OpenAIRE

Pluyter, J.R.; Buzink, S.N.; Rutkowski, A.F.; Jakimowicz, J.J.

2009-01-01

Background. Surgeons perform complex tasks while exposed to multiple distracting sources that may increase stress in the operating room (e.g., music, conversation, and unadapted use of sophisticated technologies). This study aimed to examine whether such realistic social and technological distracting conditions may influence surgical performance. Methods. Twelve medical interns performed a laparoscopic cholecystectomy task with the Xitact LC 3.0 virtual reality simulator under distracting con...

Modeling and Analysis of Realistic Fire Scenarios in Spacecraft

Science.gov (United States)

Brooker, J. E.; Dietrich, D. L.; Gokoglu, S. A.; Urban, D. L.; Ruff, G. A.

2015-01-01

An accidental fire inside a spacecraft is an unlikely, but very real emergency situation that can easily have dire consequences. While much has been learned over the past 25+ years of dedicated research on flame behavior in microgravity, a quantitative understanding of the initiation, spread, detection and extinguishment of a realistic fire aboard a spacecraft is lacking. Virtually all combustion experiments in microgravity have been small-scale, by necessity (hardware limitations in ground-based facilities and safety concerns in space-based facilities). Large-scale, realistic fire experiments are unlikely for the foreseeable future (unlike in terrestrial situations). Therefore, NASA will have to rely on scale modeling, extrapolation of small-scale experiments and detailed numerical modeling to provide the data necessary for vehicle and safety system design. This paper presents the results of parallel efforts to better model the initiation, spread, detection and extinguishment of fires aboard spacecraft. The first is a detailed numerical model using the freely available Fire Dynamics Simulator (FDS). FDS is a CFD code that numerically solves a large eddy simulation form of the Navier-Stokes equations. FDS provides a detailed treatment of the smoke and energy transport from a fire. The simulations provide a wealth of information, but are computationally intensive and not suitable for parametric studies where the detailed treatment of the mass and energy transport are unnecessary. The second path extends a model previously documented at ICES meetings that attempted to predict maximum survivable fires aboard space-craft. This one-dimensional model implies the heat and mass transfer as well as toxic species production from a fire. These simplifications result in a code that is faster and more suitable for parametric studies (having already been used to help in the hatch design of the Multi-Purpose Crew Vehicle, MPCV).

Effects of realistic force feedback in a robotic assisted minimally invasive surgery system.

Science.gov (United States)

Moradi Dalvand, Mohsen; Shirinzadeh, Bijan; Nahavandi, Saeid; Smith, Julian

2014-06-01

Robotic assisted minimally invasive surgery systems not only have the advantages of traditional laparoscopic procedures but also restore the surgeon's hand-eye coordination and improve the surgeon's precision by filtering hand tremors. Unfortunately, these benefits have come at the expense of the surgeon's ability to feel. Several research efforts have already attempted to restore this feature and study the effects of force feedback in robotic systems. The proposed methods and studies have some shortcomings. The main focus of this research is to overcome some of these limitations and to study the effects of force feedback in palpation in a more realistic fashion. A parallel robot assisted minimally invasive surgery system (PRAMiSS) with force feedback capabilities was employed to study the effects of realistic force feedback in palpation of artificial tissue samples. PRAMiSS is capable of actually measuring the tip/tissue interaction forces directly from the surgery site. Four sets of experiments using only vision feedback, only force feedback, simultaneous force and vision feedback and direct manipulation were conducted to evaluate the role of sensory feedback from sideways tip/tissue interaction forces with a scale factor of 100% in characterising tissues of varying stiffness. Twenty human subjects were involved in the experiments for at least 1440 trials. Friedman and Wilcoxon signed-rank tests were employed to statistically analyse the experimental results. Providing realistic force feedback in robotic assisted surgery systems improves the quality of tissue characterization procedures. Force feedback capability also increases the certainty of characterizing soft tissues compared with direct palpation using the lateral sides of index fingers. The force feedback capability can improve the quality of palpation and characterization of soft tissues of varying stiffness by restoring sense of touch in robotic assisted minimally invasive surgery operations.

Toxicity effects of an environmental realistic herbicide mixture on the seagrass Zostera noltei.

Science.gov (United States)

Diepens, Noël J; Buffan-Dubau, Evelyne; Budzinski, Hélène; Kallerhoff, Jean; Merlina, Georges; Silvestre, Jérome; Auby, Isabelle; Nathalie Tapie; Elger, Arnaud

2017-03-01

Worldwide seagrass declines have been observed due to multiple stressors. One of them is the mixture of pesticides used in intensive agriculture and boat antifouling paints in coastal areas. Effects of mixture toxicity are complex and poorly understood. However, consideration of mixture toxicity is more realistic and ecologically relevant for environmental risk assessment (ERA). The first aim of this study was to determine short-term effects of realistic herbicide mixture exposure on physiological endpoints of Zostera noltei. The second aim was to assess the environmental risks of this mixture, by comparing the results to previously published data. Z. noltei was exposed to a mixture of four herbicides: atrazine, diuron, irgarol and S-metolachlor, simulating the composition of typical cocktail of contaminants in the Arcachon bay (Atlantic coast, France). Three stress biomarkers were measured: enzymatic activity of glutathione reductase, effective quantum yield (EQY) and photosynthetic pigment composition after 6, 24 and 96 h. Short term exposure to realistic herbicide mixtures affected EQY, with almost 100% inhibition for the two highest concentrations, and photosynthetic pigments. Effect on pigment composition was detected after 6 h with a no observed effect concentration (NOEC) of 1 μg/L total mixture concentration. The lowest EQY effect concentration at 10% (EC 10 ) (2 μg/L) and pigment composition NOEC with an assessment factor of 10 were above the maximal field concentrations along the French Atlantic coast, suggesting that there are no potential short term adverse effects of this particular mixture on Z. noltei. However, chronic effects on photosynthesis may lead to reduced energy reserves, which could thus lead to effects at whole plant and population level. Understanding the consequences of chemical mixtures could help to improve ERA and enhance management strategies to prevent further declines of seagrass meadows worldwide. Copyright © 2016

The work is never ending: uncovering teamwork sustainability using realistic evaluation.

Science.gov (United States)

Frykman, Mandus; von Thiele Schwarz, Ulrica; Muntlin Athlin, Åsa; Hasson, Henna; Mazzocato, Pamela

2017-03-20

Purpose The purpose of this paper is to uncover the mechanisms influencing the sustainability of behavior changes following the implementation of teamwork. Design/methodology/approach Realistic evaluation was combined with a framework (DCOM®) based on applied behavior analysis to study the sustainability of behavior changes two and a half years after the initial implementation of teamwork at an emergency department. The DCOM® framework was used to categorize the mechanisms of behavior change interventions (BCIs) into the four categories of direction, competence, opportunity, and motivation. Non-participant observation and interview data were used. Findings The teamwork behaviors were not sustained. A substantial fallback in managerial activities in combination with a complex context contributed to reduced direction, opportunity, and motivation. Reduced direction made staff members unclear about how and why they should work in teams. Deterioration of opportunity was evident from the lack of problem-solving resources resulting in accumulated barriers to teamwork. Motivation in terms of management support and feedback was reduced. Practical implications The implementation of complex organizational changes in complex healthcare contexts requires continuous adaption and managerial activities well beyond the initial implementation period. Originality/value By integrating the DCOM® framework with realistic evaluation, this study responds to the call for theoretically based research on behavioral mechanisms that can explain how BCIs interact with context and how this interaction influences sustainability.

Spontaneous emission in the presence of a realistically sized cylindrical waveguide

International Nuclear Information System (INIS)

Dung, Ho Trung

2016-01-01

Various quantities characterizing the spontaneous emission process of a dipole emitter including the emission rate and the emission pattern can be expressed in terms of the Green tensor of the surrounding environment. By expanding the Green tensor around some analytically known background one as a Born series, and truncating it under appropriate conditions, complicated boundaries can be tackled with ease. However, when the emitter is embedded in the medium, even the calculation of the first-order term in the Born series is problematic because of the presence of a singularity. We show how to eliminate this singularity for a medium of arbitrary size and shape by expanding around the bulk medium rather than vacuum. In the highly symmetric configuration of an emitter located on the axis of a realistically sized cylinder, it is shown that the singularity can be removed by changing the integral variables and then the order of integration. Using both methods, we investigate the spontaneous emission rate of an initially excited two-level dipole emitter, embedded in a realistically sized cylinder, which can be a common optical fiber in the long-length limit and a disk in the short-length limit. The spatial distribution of the emitted light is calculated using the Born-expansion approach, and local-field corrections to the spontaneous emission rate are briefly discussed. (paper)

The tenants in the vineyard (GThom 65/Mark 12:1-12): A realistic ...

African Journals Online (AJOL)

Kloppenborg's reading of the parable of the tenants (Mk 12:1- 12/GThom 65) can be regarded as the first thoroughgoing realistic interpretation of the Tenants. By using extensive literary evidence on viticulture from 300 BCE to 300 CE, Kloppenborg argues that GThom 65 most probably comes closest to the original form of ...

Two politicians in a realistic experiment: attraction, discrepancy, intensity of delivery, and attitude change

NARCIS (Netherlands)

Wiegman, O.

1985-01-01

The leader of the Socialists in the Dutch Parliament and his Liberal opponent participated in this realistic experiment. Identical TV interviews with the two politicians were recorded and shown to subjects of both parties. The intensity of delivery was also varied: emotional versus rational. Our

Convective aggregation in realistic convective-scale simulations

Science.gov (United States)

Holloway, Christopher E.

2017-06-01

To investigate the real-world relevance of idealized-model convective self-aggregation, five 15 day cases of real organized convection in the tropics are simulated. These include multiple simulations of each case to test sensitivities of the convective organization and mean states to interactive radiation, interactive surface fluxes, and evaporation of rain. These simulations are compared to self-aggregation seen in the same model configured to run in idealized radiative-convective equilibrium. Analysis of the budget of the spatial variance of column-integrated frozen moist static energy shows that control runs have significant positive contributions to organization from radiation and negative contributions from surface fluxes and transport, similar to idealized runs once they become aggregated. Despite identical lateral boundary conditions for all experiments in each case, systematic differences in mean column water vapor (CWV), CWV distribution shape, and CWV autocorrelation length scale are found between the different sensitivity runs, particularly for those without interactive radiation, showing that there are at least some similarities in sensitivities to these feedbacks in both idealized and realistic simulations (although the organization of precipitation shows less sensitivity to interactive radiation). The magnitudes and signs of these systematic differences are consistent with a rough equilibrium between (1) equalization due to advection from the lateral boundaries and (2) disaggregation due to the absence of interactive radiation, implying disaggregation rates comparable to those in idealized runs with aggregated initial conditions and noninteractive radiation. This points to a plausible similarity in the way that radiation feedbacks maintain aggregated convection in both idealized simulations and the real world.Plain Language SummaryUnderstanding the processes that lead to the organization of tropical rainstorms is an important challenge for weather

Realistic generation cost of solar photovoltaic electricity

International Nuclear Information System (INIS)

Singh, Parm Pal; Singh, Sukhmeet

2010-01-01

Solar photovoltaic (SPV) power plants have long working life with zero fuel cost and negligible maintenance cost but requires huge initial investment. The generation cost of the solar electricity is mainly the cost of financing the initial investment. Therefore, the generation cost of solar electricity in different years depends on the method of returning the loan. Currently levelized cost based on equated payment loan is being used. The static levelized generation cost of solar electricity is compared with the current value of variable generation cost of grid electricity. This improper cost comparison is inhibiting the growth of SPV electricity by creating wrong perception that solar electricity is very expensive. In this paper a new method of loan repayment has been developed resulting in generation cost of SPV electricity that increases with time like that of grid electricity. A generalized capital recovery factor has been developed for graduated payment loan in which capital and interest payment in each installment are calculated by treating each loan installment as an independent loan for the relevant years. Generalized results have been calculated which can be used to determine the cost of SPV electricity for a given system at different places. Results show that for SPV system with specific initial investment of 5.00 cents /kWh/year, loan period of 30 years and loan interest rate of 4% the levelized generation cost of SPV electricity with equated payment loan turns out to be 28.92 cents /kWh, while the corresponding generation cost with graduated payment loan with escalation in annual installment of 8% varies from 9.51 cents /kWh in base year to 88.63 cents /kWh in 30th year. So, in this case, the realistic current generation cost of SPV electricity is 9.51 cents /kWh and not 28.92 cents /kWh. Further, with graduated payment loan, extension in loan period results in sharp decline in cost of SPV electricity in base year. Hence, a policy change is required

Design of a Realistic Test Simulator For a Built-In Self Test Environment

Directory of Open Access Journals (Sweden)

A. Ahmad

2010-12-01

Full Text Available This paper presents a realistic test approach suitable to Design For Testability (DFT and Built- In Self Test (BIST environments. The approach is culminated in the form of a test simulator which is capable of providing a required goal of test for the System Under Test (SUT. The simulator uses the approach of fault diagnostics with fault grading procedure to provide the tests. The tool is developed on a common PC platform and hence no special software is required. Thereby, it is a low cost tool and hence economical. The tool is very much suitable for determining realistic test sequences for a targeted goal of testing for any SUT. The developed tool incorporates a flexible Graphical User Interface (GUI procedure and can be operated without any special programming skill. The tool is debugged and tested with the results of many bench mark circuits. Further, this developed tool can be utilized for educational purposes for many courses such as fault-tolerant computing, fault diagnosis, digital electronics, and safe - reliable - testable digital logic designs.

Turbulence studies in tokamak boundary plasmas with realistic divertor geometry

International Nuclear Information System (INIS)

Xu, X.Q.; Cohen, R.H.; Porter, G.D.; Rognlien, T.; Ryutov, D.D.; Myra, J.R.; D'Ippolito, D.A.; Moyer, R.; Groebner, R.J.

2001-01-01

Results are presented from the 3D nonlocal electromagnetic turbulence code BOUT and the linearized shooting code BAL for studies of turbulence in tokamak boundary plasmas and its relationship to the L-H transition, in a realistic divertor plasma geometry. The key results include: (1) the identification of the dominant resistive X-point mode in divertor geometry and (2) turbulence suppression in the L-H transition by shear in the ExB drift speed, ion diamagnetism and nite polarization. Based on the simulation results, a parameterization of the transport is given that includes the dependence on the relevant physical parameters. (author)

Turbulence studies in tokamak boundary plasmas with realistic divertor geometry

International Nuclear Information System (INIS)

Xu, X.Q.; Cohen, R.H.; Por, G.D. ter; Rognlien, T.D.; Ryutov, D.D.; Myra, J.R.; D'Ippolito, D.A.; Moyer, R.; Groebner, R.J.

1999-01-01

Results are presented from the 3D nonlocal electromagnetic turbulence code BOUT and the linearized shooting code BAL for studies of turbulence in tokamak boundary plasmas and its relationship to the L-H transition, in a realistic divertor plasma geometry. The key results include: (1) the identification of the dominant resistive X-point mode in divertor geometry and (2) turbulence suppression in the L-H transition by shear in the E x B drift speed, ion diamagnetism and finite polarization. Based on the simulation results, a parameterization of the transport is given that includes the dependence on the relevant physical parameters. (author)

Breaking with fun, educational and realistic learning games

DEFF Research Database (Denmark)

Duus Henriksen, Thomas

2009-01-01

are commonly conceived as means for staging learning processes, and that thinking learning games so has an inhibiting effect in regard to creating learning processes. The paper draws upon a qualitative study of participants' experiences with ‘the EIS Simulation', which is a computer-based learning game......This paper addresses the game conceptions and values that learning games inherit from regular gaming, as well as how they affect the use and development of learning games. Its key points concern the issues of thinking learning games as fun, educative and realistic, which is how learning games...... for teaching change management and change implementation. The EIS is played in groups, who share the game on a computer, and played by making change decisions in order to implement an IT system in an organisation. In this study, alternative participatory incentives, means for creating learning processes...

Resolving conflict realistically in today's health care environment.

Science.gov (United States)

Smith, S B; Tutor, R S; Phillips, M L

2001-11-01

Conflict is a natural part of human interaction, and when properly addressed, results in improved interpersonal relationships and positive organizational culture. Unchecked conflict may escalate to verbal and physical violence. Conflict that is unresolved creates barriers for people, teams, organizational growth, and productivity, leading to cultural disintegration within the establishment. By relying on interdependence and professional collaboration, all parties involved grow and, in turn, benefit the organization and population served. When used in a constructive manner, conflict resolution can help all parties involved see the whole picture, thus allowing freedom for growth and change. Conflict resolution is accomplished best when emotions are controlled before entering into negotiation. Positive confrontation, problem solving, and negotiation are processes used to realistically resolve conflict. Everyone walks away a winner when conflict is resolved in a positive, professional manner (Stone, 1999).

The Impact of Emotion on Negotiation Behaviour during a Realistic Training Scenario

Science.gov (United States)

2007-11-01

Sorce, Emde, & Svejda; cited in van Kleef, et al., 2004a), and induce reciprocal emotions in others ( Keltner & Haidt, 1999; cited in van Kleef, et al...DRDC Toronto CR 2007-166 THE IMPACT OF EMOTION ON NEGOTIATION BEHAVIOUR DURING A REALISTIC TRAINING SCENARIO by: Michael H. Thomson...made to dig what look like their own graves. This experiment explored the impact of emotion on military trainees’ negotiation behaviour and

Interactive Web-based Floodplain Simulation System for Realistic Experiments of Flooding and Flood Damage

Science.gov (United States)

Demir, I.

2013-12-01

Recent developments in web technologies make it easy to manage and visualize large data sets with general public. Novel visualization techniques and dynamic user interfaces allow users to create realistic environments, and interact with data to gain insight from simulations and environmental observations. The floodplain simulation system is a web-based 3D interactive flood simulation environment to create real world flooding scenarios. The simulation systems provides a visually striking platform with realistic terrain information, and water simulation. Students can create and modify predefined scenarios, control environmental parameters, and evaluate flood mitigation techniques. The web-based simulation system provides an environment to children and adults learn about the flooding, flood damage, and effects of development and human activity in the floodplain. The system provides various scenarios customized to fit the age and education level of the users. This presentation provides an overview of the web-based flood simulation system, and demonstrates the capabilities of the system for various flooding and land use scenarios.

Do Preschoolers Recognize The Emotional Expressiveness of Colors in Realistic and Abstract Art Paintings?

Science.gov (United States)

Pouliou, Dimitra; Bonoti, Fotini; Nikonanou, Niki

2018-01-01

The present study was designed to examine preschoolers' ability to recognize the emotional expressiveness of an art painting, through its colors. To attain this aim 78 children, 3-5 years old were presented with realistic and abstract paintings conveying either happiness or sadness and were asked to choose those which matched the appropriate emotion. In total 16 paintings were used, which varied in color, while their subject matter was held as constant as possible after they had been previously rated by a group of adults to ensure that they conveyed the two emotions under investigation. Results showed that children's ability to recognize the emotional expressiveness of a painting through its colors appears at 3 years old and increases significantly at 4 and 5 years old. It was also found that the mood of happiness was more easily recognized than that of sadness, while the style of art paintings (realistic vs. abstract) did not affect children's ability to recognize emotions.

Depictions and Gaps: Portrayal of U.S. Poverty in Realistic Fiction Children's Picture Books

Science.gov (United States)

Kelley, Jane E.; Darragh, Janine J.

2011-01-01

Researchers conducted a critical multicultural analysis of 58 realistic fiction children's picture books that portray people living in poverty and compared these depictions to recent statistics from the United States Census Bureau. The picture books were examined for the following qualities: main character, geographic locale and time era, focal…

The effect of problem posing and problem solving with realistic mathematics education approach to the conceptual understanding and adaptive reasoning

Science.gov (United States)

Mahendra, Rengga; Slamet, Isnandar; Budiyono

2017-12-01

One of the difficulties of students in learning mathematics is on the subject of geometry that requires students to understand abstract things. The aim of this research is to determine the effect of learning model Problem Posing and Problem Solving with Realistic Mathematics Education Approach to conceptual understanding and students' adaptive reasoning in learning mathematics. This research uses a kind of quasi experimental research. The population of this research is all seventh grade students of Junior High School 1 Jaten, Indonesia. The sample was taken using stratified cluster random sampling technique. The test of the research hypothesis was analyzed by using t-test. The results of this study indicate that the model of Problem Posing learning with Realistic Mathematics Education Approach can improve students' conceptual understanding significantly in mathematics learning. In addition tu, the results also showed that the model of Problem Solving learning with Realistic Mathematics Education Approach can improve students' adaptive reasoning significantly in learning mathematics. Therefore, the model of Problem Posing and Problem Solving learning with Realistic Mathematics Education Approach is appropriately applied in mathematics learning especially on the subject of geometry so as to improve conceptual understanding and students' adaptive reasoning. Furthermore, the impact can improve student achievement.

Thermohydraulic simulation of HTR-10 nuclear reactor core using realistic CFD approach

International Nuclear Information System (INIS)

Silva, Alexandro S.; Dominguez, Dany S.; Mazaira, Leorlen Y. Rojas; Hernandez, Carlos R.G.; Lira, Carlos Alberto Brayner de Oliveira

2015-01-01

High-temperature gas-cooled reactors (HTGRs) have the potential to be used as possible energy generation sources in the near future, owing to their inherently safe performance by using a large amount of graphite, low power density design, and high conversion efficiency. However, safety is the most important issue for its commercialization in nuclear energy industry. It is very important for safety design and operation of an HTGR to investigate its thermal–hydraulic characteristics. In this article, it was performed the thermal–hydraulic simulation of compressible flow inside the core of the pebble bed reactor HTR (High Temperature Reactor)-10 using Computational Fluid Dynamics (CFD). The realistic approach was used, where every closely packed pebble is realistically modelled considering a graphite layer and sphere of fuel. Due to the high computational cost is impossible simulate the full core; therefore, the geometry used is a column of FCC (Face Centered Cubic) cells, with 41 layers and 82 pebbles. The input data used were taken from the thermohydraulic IAEA Benchmark (TECDOC-1694). The results show the profiles of velocity and temperature of the coolant in the core, and the temperature distribution inside the pebbles. The maximum temperatures in the pebbles do not exceed the allowable limit for this type of nuclear fuel. (author)

Local realistic theories and quantum mechanics for the two-neutral-kaon system

International Nuclear Information System (INIS)

Dalitz, R.H.; Garbarino, G.

2001-01-01

The predictions of local realistic theories for the observables concerning the evolution of a K 0 K-bar 0 quantum entangled pair (created in the decay of the phi-meson) are discussed. It is shown, in agreement with Bell's theorem, that the most general local hidden-variable model fails in reproducing the whole set of quantum-mechanical joint probabilities. We achieve these conclusion by employing two different approaches. In the first approach, the local realistic observables are deduced from the most general premises concerning locality and realism, and Bell-like inequalities are not employed. The other approach makes use of Bell's inequalities. In the first approach, under particular conditions for the detection times, the discrepancy between quantum mechanics and local realism for the time-dependent asymmetry turns out to be not less than 20%. A similar incompatibility can be made evident by means of a Bell-type test by employing both Wigner's and (once properly normalized probabilities are used) Clauser-Horne-Shimony-Holt's inequalities. Because of its relatively low experimental accuracy, the data obtained by the CPLEAR collaboration for the asymmetry parameter do not yet allow a decisive test of local realism. Such a test, both with and without the use of Bell's inequalities, should be feasible in the future at the Frascati PHI-factory

Comparing Realistic Subthalamic Nucleus Neuron Models

Science.gov (United States)

Njap, Felix; Claussen, Jens C.; Moser, Andreas; Hofmann, Ulrich G.

2011-06-01

The mechanism of action of clinically effective electrical high frequency stimulation is still under debate. However, recent evidence points at the specific activation of GABA-ergic ion channels. Using a computational approach, we analyze temporal properties of the spike trains emitted by biologically realistic neurons of the subthalamic nucleus (STN) as a function of GABA-ergic synaptic input conductances. Our contribution is based on a model proposed by Rubin and Terman and exhibits a wide variety of different firing patterns, silent, low spiking, moderate spiking and intense spiking activity. We observed that most of the cells in our network turn to silent mode when we increase the GABAA input conductance above the threshold of 3.75 mS/cm2. On the other hand, insignificant changes in firing activity are observed when the input conductance is low or close to zero. We thus reproduce Rubin's model with vanishing synaptic conductances. To quantitatively compare spike trains from the original model with the modified model at different conductance levels, we apply four different (dis)similarity measures between them. We observe that Mahalanobis distance, Victor-Purpura metric, and Interspike Interval distribution are sensitive to different firing regimes, whereas Mutual Information seems undiscriminative for these functional changes.

Quantifying introgression risk with realistic population genetics.

Science.gov (United States)

Ghosh, Atiyo; Meirmans, Patrick G; Haccou, Patsy

2012-12-07

Introgression is the permanent incorporation of genes from the genome of one population into another. This can have severe consequences, such as extinction of endemic species, or the spread of transgenes. Quantification of the risk of introgression is an important component of genetically modified crop regulation. Most theoretical introgression studies aimed at such quantification disregard one or more of the most important factors concerning introgression: realistic genetical mechanisms, repeated invasions and stochasticity. In addition, the use of linkage as a risk mitigation strategy has not been studied properly yet with genetic introgression models. Current genetic introgression studies fail to take repeated invasions and demographic stochasticity into account properly, and use incorrect measures of introgression risk that can be manipulated by arbitrary choices. In this study, we present proper methods for risk quantification that overcome these difficulties. We generalize a probabilistic risk measure, the so-called hazard rate of introgression, for application to introgression models with complex genetics and small natural population sizes. We illustrate the method by studying the effects of linkage and recombination on transgene introgression risk at different population sizes.

Cerebral blood flow simulations in realistic geometries

Directory of Open Access Journals (Sweden)

Szopos Marcela

2012-04-01

Full Text Available The aim of this work is to perform the computation of the blood flow in all the cerebral network, obtained from medical images as angiographies. We use free finite elements codes as FreeFEM++. We first test the code on analytical solutions in simplified geometries. Then, we study the influence of boundary conditions on the flow and we finally perform first computations on realistic meshes. L’objectif est ici de simuler l’écoulement sanguin dans tout le réseau cérébral (artériel et veineux obtenu à partir d’angiographies cérébrales 3D à l’aide de logiciels d’éléments finis libres, comme FreeFEM++. Nous menons d’abord une étude détaillée des résultats sur des solutions analytiques et l’influence des conditions limites à imposer dans des géométries simplifiées avant de travailler sur les maillages réalistes.

Among cosmopolitan values and strategic interests: liberal and realist discourses of canada’s international security policy during post- cold war

OpenAIRE

Rodríguez M., Federmán

2014-01-01

The purpose of the article is to explain the liberal and realist discourses that underpinned the Canadian International Security Policy (CISP) during the post-Cold War. In particular, it offers evidence to show that Canadian governments inevitably debate between cosmopolitan values and strategic interests in formulating their respective policies of international security. After considering how liberal and realist orientations of this policy have been studied in the literature on CISP, it expl...

Collective action for implementation: a realist evaluation of organisational collaboration in healthcare

OpenAIRE

Rycroft-Malone, Jo; Burton, Christopher R; Wilkinson, Joyce; Harvey, Gill; McCormack, Brendan; Baker, Richard; Dopson, Sue; Graham, Ian D.; Staniszewska, Sophie; Thompson, Carl; Ariss, Steven; Melville-Richards, Lucy; Williams, Lynne

2016-01-01

Background\\ud \\ud Increasingly, it is being suggested that translational gaps might be eradicated or narrowed by bringing research users and producers closer together, a theory that is largely untested. This paper reports a national study to fill a gap in the evidence about the conditions, processes and outcomes related to collaboration and implementation.\\ud \\ud \\ud Methods\\ud \\ud A longitudinal realist evaluation using multiple qualitative methods case studies was conducted with three Colla...

Effects of classical and neo-classical cross-field transport of tungsten impurity in realistic tokamak geometry

Energy Technology Data Exchange (ETDEWEB)

Yamoto, S.; Inoue, H.; Sawada, Y.; Hatayama, A. [Faculty of Science and Technology, Keio University, Yokohama (Japan); Homma, Y.; Hoshino, K. [Japan Atomic Energy Agency, Rokkasho, Aomori (Japan); Bonnin, X. [ITER Organization, St. Paul Lez Durance (France); Coster, D. [Max-Planck-Institut fuer Plasmaphysik, Garching (Germany); Schneider, R. [Ernst-Moritz-Arndt University Greifswald (Germany)

2016-08-15

The initial simulation study of the neoclassical perpendicular self-diffusion transport in the SOL/Divertor regions for a realistic tokamak geometry with the IMPGYRO code has been performed in this paper. One of the most unique features of the IMPGYRO code is calculating exact Larmor orbit of the test particle instead of assuming guiding center approximation. Therefore, effects of the magnetic drifts in realistic tokamaks are naturally taken into account in the IMPGYRO code. This feature makes it possible to calculate neoclassical transport processes, which possibly become large in the SOL/divertor plasma. Indeed, neoclassical self-diffusion process, the resultant effect of the combination of magnetic drift and Coulomb collisions with background ions, has already been included in the IMPGYRO model. In the present paper, prior to implementing the detailed model of neoclassical transport process into IMPGYRO, we have investigated the effect of neoclassical selfdiffusion in a realistic tokamak geometry with lower single null X-point. We also use a model with guiding center approximation in order to compare with the IMPGYRO full orbit model. The preliminary calculation results of each model have shown differences in the perpendicular average velocity of impurity ions at the top region of the SOL. The mechanism which leads to the difference has been discussed. (copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Magnetic exchange at realistic CoO/Ni interfaces

KAUST Repository

Grytsiuk, Sergii

2012-07-30

We study the CoO/Ni interface by first principles calculations. Because the lattice mismatch is large, a realistic description requires a huge supercell. We investigate two interface configurations: in interface 1 the coupling between the Ni and Co atoms is mediated by O, whereas in interface 2 the Ni and Co atoms are in direct contact. We find that the magnetization (including the orbital moment) in interface 1 has a similar value as in bulk Ni but opposite sign, while in interface 2 it grows by 164%. The obtained magnetic moments can be explained by the local atomic environments. In addition, we find effects of charge transfer between the interface atoms. The Co 3d local density of states of interface 2 exhibits surprisingly small deviations from the corresponding bulk result, although the first coordination sphere is no longer octahedral. © Springer-Verlag 2012.

Magnetic exchange at realistic CoO/Ni interfaces

KAUST Repository

Grytsyuk, Sergiy; Cossu, Fabrizio; Schwingenschlö gl, Udo

2012-01-01

We study the CoO/Ni interface by first principles calculations. Because the lattice mismatch is large, a realistic description requires a huge supercell. We investigate two interface configurations: in interface 1 the coupling between the Ni and Co atoms is mediated by O, whereas in interface 2 the Ni and Co atoms are in direct contact. We find that the magnetization (including the orbital moment) in interface 1 has a similar value as in bulk Ni but opposite sign, while in interface 2 it grows by 164%. The obtained magnetic moments can be explained by the local atomic environments. In addition, we find effects of charge transfer between the interface atoms. The Co 3d local density of states of interface 2 exhibits surprisingly small deviations from the corresponding bulk result, although the first coordination sphere is no longer octahedral. © Springer-Verlag 2012.

Collins, J

African Journals Online (AJOL)

André Jacobs

of common military terms and a short curriculum vitae of the authors. Both of these enhance the value of the book as they make it easy to reference unknown concepts. (especially for non-military readers) and give further evidence of the wide scope of the field of Military Geography. In Military Geography: from Peace to War, ...

Collins, J

African Journals Online (AJOL)

André Jacobs

Military Geography in operational planning, geographic support to combined operations, remote sensing for military applications, maps for disaster relief missions, protection of cultural property, and geology and water supply in international military missions are some of the chapters grouped together in this block. In the final ...

Realistic teenage fiction with a sexrelated theme: Readers’ responses to Slinger-slinger by Francois Bloemhof

Directory of Open Access Journals (Sweden)

M.N. Wiggill

2004-07-01

Full Text Available Francois Bloemhof submitted his novel for teenagers, “Slinger-slinger” for the Sanlam competition for youth fiction in 1996. Eventually this prizewinner in the beginners’ category was published in 1997. The main theme of “Slinger-slinger” is the sexual awakening and identity of teenagers. A study was undertaken to obtain the opinions of teenage readers about the success of “Slinger-slinger” as a whole, as well as to gauge the success of integrating sexual aspects in this novel. The study also served to obtain information about the reading needs of teenage readers with regard to realistic teenage fiction and teenage fiction with a sex-related theme. The findings of the study underlying this article indicated that the participating teenage readers regarded “Slinger-slinger” as successful and interesting, and that they would like to read more realistic Afrikaans teenage fiction such as “Slinger-slinger”.

Bacterial diversity and community structure of a sub-surface aquifer exposed to realistic low herbicide concentrations

DEFF Research Database (Denmark)

Lipthay, Julia R. de; Johnsen, Kaare; Albrechtsen, H.-J.

2004-01-01

contaminants. We examined the effect of in situ exposure to realistic low concentrations of herbicides on the microbial diversity and community structure of sub-surface sediments from a shallow aquifer near Vejen (Denmark). Three different community analyses were performed: colony morphology typing, sole...... community analyses. In contrast, no significant effect was found on the bacterial diversity, except for the culturable fraction where a significantly increased richness and Shannon index was found in the herbicide acclimated sediments. The results of this study show that in situ exposure of sub-surface...... aquifers to realistic low concentrations of herbicides may alter the overall structure of a natural bacterial community, although significant effects on the genetic diversity and carbon substrate usage cannot be detected. The observed impact was probably due to indirect effects. In future investigations...

Using technology to engage hospitalised patients in their care: a realist review.

Science.gov (United States)

Roberts, Shelley; Chaboyer, Wendy; Gonzalez, Ruben; Marshall, Andrea

2017-06-06

Patient participation in health care is associated with improved outcomes for patients and hospitals. New technologies are creating vast potential for patients to participate in care at the bedside. Several studies have explored patient use, satisfaction and perceptions of health information technology (HIT) interventions in hospital. Understanding what works for whom, under what conditions, is important when considering interventions successfully engaging patients in care. This realist review aimed to determine key features of interventions using bedside technology to engage hospital patients in their care and analyse these in terms of context, mechanisms and outcomes. A realist review was chosen to explain how and why complex HIT interventions work or fail within certain contexts. The review was guided by Pawson's realist review methodology, involving: clarifying review scope; searching for evidence; data extraction and evidence appraisal; synthesising evidence and drawing conclusions. Author experience and an initial literature scope provided insight and review questions and theories (propositions) around why interventions worked were developed and iteratively refined. A purposive search was conducted to find evidence to support, refute or identify further propositions, which formed an explanatory model. Each study was 'mined' for evidence to further develop the propositions and model. Interactive learning was the overarching theme of studies using technology to engage patients in their care. Several propositions underpinned this, which were labelled: information sharing; self-assessment and feedback; tailored education; user-centred design; and support in use of HIT. As studies were mostly feasibility or usability studies, they reported patient-centred outcomes including patient acceptability, satisfaction and actual use of HIT interventions. For each proposition, outcomes were proposed to come about by mechanisms including improved communication, shared

Investigasi Kemampuan Problem Solving dan Problem Posing Matematis Mahasiswa Via Pendekatan Realistic

OpenAIRE

Afriansyah, Ekasatya Aldila

2016-01-01

Mathematical problem solving and problem posing skill are the mathematical skills that need to be owned by students. By having this skill, students can be more creative in expressing ideas by connecting the knowledge that they held previously. But in reality, there are some students who are lack of problem solving skill; therefore it is really important to improve learning through appropriate approach. Realistic approach had been chosen as the learning theory to be applied in the class. This ...

Intelligible design a realistic approach to the philosophy and history of science

CERN Document Server

Gonzalo, Julio A

2014-01-01

This book provides realistic answers to hotly debated scientific topics: Science is about quantitative aspects of natural realities (physical, chemical, biological) but it is the result of human intellectual inquiry and therefore not "per se" materialistic. This book, with contributions from experts in physics, cosmology, mathematics, engineering, biology and genetics, covers timely and relevant topics such as the origin of the universe, the origin of life on Earth, the origin of man (intelligent life) and the origin of science.

[A new age of mass casuality education? : The InSitu project: realistic training in virtual reality environments].

Science.gov (United States)

Lorenz, D; Armbruster, W; Vogelgesang, C; Hoffmann, H; Pattar, A; Schmidt, D; Volk, T; Kubulus, D

2016-09-01

Chief emergency physicians are regarded as an important element in the care of the injured and sick following mass casualty accidents. Their education is very theoretical; practical content in contrast often falls short. Limitations are usually the very high costs of realistic (large-scale) exercises, poor reproducibility of the scenarios, and poor corresponding results. To substantially improve the educational level because of the complexity of mass casualty accidents, modified training concepts are required that teach the not only the theoretical but above all the practical skills considerably more intensively than at present. Modern training concepts should make it possible for the learner to realistically simulate decision processes. This article examines how interactive virtual environments are applicable for the education of emergency personnel and how they could be designed. Virtual simulation and training environments offer the possibility of simulating complex situations in an adequately realistic manner. The so-called virtual reality (VR) used in this context is an interface technology that enables free interaction in addition to a stereoscopic and spatial representation of virtual large-scale emergencies in a virtual environment. Variables in scenarios such as the weather, the number wounded, and the availability of resources, can be changed at any time. The trainees are able to practice the procedures in many virtual accident scenes and act them out repeatedly, thereby testing the different variants. With the aid of the "InSitu" project, it is possible to train in a virtual reality with realistically reproduced accident situations. These integrated, interactive training environments can depict very complex situations on a scale of 1:1. Because of the highly developed interactivity, the trainees can feel as if they are a direct part of the accident scene and therefore identify much more with the virtual world than is possible with desktop systems

The Past as Prologue: Realist Thought and the Future of American Security Policy

Science.gov (United States)

2011-01-01

Recently, and in large part due to a reaction to cultural relativism , some realists have sided with those who support universal human rights. They do...for ethics, justice, or morality .7 Similarly, John Herz is emphatic about how his realism is different from that of Morgenthau who, like Thucydides...Prologue survival pressures tightly constrain state behaviors, we should not expect internal characteristics or moral considerations to seriously

Experimental Analysis of the Vorticity and Turbulent Flow Dynamics of a Pitching Airfoil at Realistic Flight Conditions

National Research Council Canada - National Science Library

Bowersox, Rodney D; Sahoo, Dipankar

2007-01-01

The primary objective of this research proposal was improved understanding of the fundamental vorticity and turbulent flow physics for a dynamically stalling airfoil at realistic helicopter flight conditions...

Simulation of size-dependent aerosol deposition in a realistic model of the upper human airways

NARCIS (Netherlands)

Frederix, E.M.A.; Kuczaj, Arkadiusz K.; Nordlund, Markus; Belka, M.; Lizal, F.; Elcner, J.; Jicha, M.; Geurts, Bernardus J.

An Eulerian internally mixed aerosol model is used for predictions of deposition inside a realistic cast of the human upper airways. The model, formulated in the multi-species and compressible framework, is solved using the sectional discretization of the droplet size distribution function to

Toward developing more realistic groundwater models using big data

Science.gov (United States)

Vahdat Aboueshagh, H.; Tsai, F. T. C.; Bhatta, D.; Paudel, K.

2017-12-01

Rich geological data is the backbone of developing realistic groundwater models for groundwater resources management. However, constructing realistic groundwater models can be challenging due to inconsistency between different sources of geological, hydrogeological and geophysical data and difficulty in processing big data to characterize the subsurface environment. This study develops a framework to utilize a big geological dataset to create a groundwater model for the Chicot Aquifer in the southwestern Louisiana, which borders on the Gulf of Mexico at south. The Chicot Aquifer is the principal source of fresh water in southwest Louisiana, underlying an area of about 9,000 square miles. Agriculture is the largest groundwater consumer in this region and overpumping has caused significant groundwater head decline and saltwater intrusion from the Gulf and deep formations. A hydrostratigraphy model was constructed using around 29,000 electrical logs and drillers' logs as well as screen lengths of pumping wells through a natural neighbor interpolation method. These sources of information have different weights in terms of accuracy and trustworthy. A data prioritization procedure was developed to filter untrustworthy log information, eliminate redundant data, and establish consensus of various lithological information. The constructed hydrostratigraphy model shows 40% sand facies, which is consistent with the well log data. The hydrostratigraphy model confirms outcrop areas of the Chicot Aquifer in the north of the study region. The aquifer sand formation is thinning eastward to merge into Atchafalaya River alluvial aquifer and coalesces to the underlying Evangeline aquifer. A grid generator was used to convert the hydrostratigraphy model into a MODFLOW grid with 57 layers. A Chicot groundwater model was constructed using the available hydrologic and hydrogeological data for 2004-2015. Pumping rates for irrigation wells were estimated using the crop type and acreage

Asymmetric focusing study from twin input power couplers using realistic rf cavity field maps

Directory of Open Access Journals (Sweden)

Colwyn Gulliford

2011-03-01

Full Text Available Advanced simulation codes now exist that can self-consistently solve Maxwell’s equations for the combined system of an rf cavity and a beam bunch. While these simulations are important for a complete understanding of the beam dynamics in rf cavities, they require significant time and computing power. These techniques are therefore not readily included in real time simulations useful to the beam physicist during beam operations. Thus, there exists a need for a simplified algorithm which simulates realistic cavity fields significantly faster than self-consistent codes, while still incorporating enough of the necessary physics to ensure accurate beam dynamics computation. To this end, we establish a procedure for producing realistic field maps using lossless cavity eigenmode field solvers. This algorithm incorporates all relevant cavity design and operating parameters, including beam loading from a nonrelativistic beam. The algorithm is then used to investigate the asymmetric quadrupolelike focusing produced by the input couplers of the Cornell ERL injector cavity for a variety of beam and operating parameters.

GADEN: A 3D Gas Dispersion Simulator for Mobile Robot Olfaction in Realistic Environments.

Science.gov (United States)

Monroy, Javier; Hernandez-Bennets, Victor; Fan, Han; Lilienthal, Achim; Gonzalez-Jimenez, Javier

2017-06-23

This work presents a simulation framework developed under the widely used Robot Operating System (ROS) to enable the validation of robotics systems and gas sensing algorithms under realistic environments. The framework is rooted in the principles of computational fluid dynamics and filament dispersion theory, modeling wind flow and gas dispersion in 3D real-world scenarios (i.e., accounting for walls, furniture, etc.). Moreover, it integrates the simulation of different environmental sensors, such as metal oxide gas sensors, photo ionization detectors, or anemometers. We illustrate the potential and applicability of the proposed tool by presenting a simulation case in a complex and realistic office-like environment where gas leaks of different chemicals occur simultaneously. Furthermore, we accomplish quantitative and qualitative validation by comparing our simulated results against real-world data recorded inside a wind tunnel where methane was released under different wind flow profiles. Based on these results, we conclude that our simulation framework can provide a good approximation to real world measurements when advective airflows are present in the environment.

Radiation Damage to Nervous System: Designing Optimal Models for Realistic Neuron Morphology in Hippocampus

Science.gov (United States)

Batmunkh, Munkhbaatar; Bugay, Alexander; Bayarchimeg, Lkhagvaa; Lkhagva, Oidov

2018-02-01

The present study is focused on the development of optimal models of neuron morphology for Monte Carlo microdosimetry simulations of initial radiation-induced events of heavy charged particles in the specific types of cells of the hippocampus, which is the most radiation-sensitive structure of the central nervous system. The neuron geometry and particles track structures were simulated by the Geant4/Geant4-DNA Monte Carlo toolkits. The calculations were made for beams of protons and heavy ions with different energies and doses corresponding to real fluxes of galactic cosmic rays. A simple compartmental model and a complex model with realistic morphology extracted from experimental data were constructed and compared. We estimated the distribution of the energy deposition events and the production of reactive chemical species within the developed models of CA3/CA1 pyramidal neurons and DG granule cells of the rat hippocampus under exposure to different particles with the same dose. Similar distributions of the energy deposition events and concentration of some oxidative radical species were obtained in both the simplified and realistic neuron models.

From Minimal to Realistic Supersymmetric SU(5) Grand Unification

CERN Document Server

Altarelli, Guido; Masina, I; Altarelli, Guido; Feruglio, Ferruccio; Masina, Isabella

2000-01-01

We construct and discuss a "realistic" example of SUSY SU(5) GUT model, with an additional U(1) flavour symmetry, that is not plagued by the need of large fine tunings, like those associated with doublet-triplet splitting in the minimal model, and that leads to an acceptable phenomenology. This includes coupling unification with a value of alpha_s(m_Z) in much better agreement with the data than in the minimal version, an acceptable hierarchical pattern for fermion masses and mixing angles, also including neutrino masses and mixings, and a proton decay rate compatible with present limits (but the discovery of proton decay should be within reach of the next generation of experiments). In the neutrino sector the preferred solution is one with nearly maximal mixing both for atmospheric and solar neutrinos.

Is islet transplantation a realistic approach to curing diabetes?

Science.gov (United States)

Jin, Sang-Man; Kim, Kwang-Won

2017-01-01

Since the report of type 1 diabetes reversal in seven consecutive patients by the Edmonton protocol in 2000, pancreatic islet transplantation has been reappraised based on accumulated clinical evidence. Although initially expected to therapeutically target long-term insulin independence, islet transplantation is now indicated for more specific clinical benefits. With the long-awaited report of the first phase 3 clinical trial in 2016, allogeneic islet transplantation is now transitioning from an experimental to a proven therapy for type 1 diabetes with problematic hypoglycemia. Islet autotransplantation has already been therapeutically proven in chronic pancreatitis with severe abdominal pain refractory to conventional treatments, and it holds promise for preventing diabetes after partial pancreatectomy due to benign pancreatic tumors. Based on current evidence, this review focuses on islet transplantation as a realistic approach to treating diabetes.

Development of a realistic, dynamic digital brain phantom for CT perfusion validation

Science.gov (United States)

Divel, Sarah E.; Segars, W. Paul; Christensen, Soren; Wintermark, Max; Lansberg, Maarten G.; Pelc, Norbert J.

2016-03-01

Physicians rely on CT Perfusion (CTP) images and quantitative image data, including cerebral blood flow, cerebral blood volume, and bolus arrival delay, to diagnose and treat stroke patients. However, the quantification of these metrics may vary depending on the computational method used. Therefore, we have developed a dynamic and realistic digital brain phantom upon which CTP scans can be simulated based on a set of ground truth scenarios. Building upon the previously developed 4D extended cardiac-torso (XCAT) phantom containing a highly detailed brain model, this work consisted of expanding the intricate vasculature by semi-automatically segmenting existing MRA data and fitting nonuniform rational B-spline surfaces to the new vessels. Using time attenuation curves input by the user as reference, the contrast enhancement in the vessels changes dynamically. At each time point, the iodine concentration in the arteries and veins is calculated from the curves and the material composition of the blood changes to reflect the expected values. CatSim, a CT system simulator, generates simulated data sets of this dynamic digital phantom which can be further analyzed to validate CTP studies and post-processing methods. The development of this dynamic and realistic digital phantom provides a valuable resource with which current uncertainties and controversies surrounding the quantitative computations generated from CTP data can be examined and resolved.

Radioactive waste management in Brazil: a realistic view

International Nuclear Information System (INIS)

Heilbron Filho, Paulo Fernando Lavalle; Perez Guerrero, Jesus Salvador; Xavier, Ana Maria

2014-01-01

The objective of this article is to present a realistic view of the main issues related to the management of radioactive waste in Brazil as well as a comprehensive picture of the regulatory waste management status in the country and internationally. Technical aspects that must be considered to ensure a safe construction of near surface disposal facilities for radioactive waste of low and medium levels of radiation are addressed. Different types of deposits, the basic regulatory issues involving the licensing of these facilities, the development of a financial compensation model for the Brazilian Municipalities where deposits are to be placed, the importance of the participation of the scientific community and society in the process of radioactive waste site selection and disposal, guidance for the application of the basic requirements of safety and radiation protection, the general safety aspects involved and the current actions for the disposal of radioactive waste in Brazil are highlighted. (author)

Simulating realistic implementations of spin field effect transistor

Science.gov (United States)

Gao, Yunfei; Lundstrom, Mark S.; Nikonov, Dmitri E.

2011-04-01

The spin field effect transistor (spinFET), consisting of two ferromagnetic source/drain contacts and a Si channel, is predicted to have outstanding device and circuit performance. We carry out a rigorous numerical simulation of the spinFET based on the nonequilibrium Green's function formalism self-consistently coupled with a Poisson solver to produce the device I-V characteristics. Good agreement with the recent experiments in terms of spin injection, spin transport, and the magnetoresistance ratio (MR) is obtained. We include factors crucial for realistic devices: tunneling through a dielectric barrier, and spin relaxation at the interface and in the channel. Using these simulations, we suggest ways of optimizing the device. We propose that by choosing the right contact material and inserting tunnel oxide barriers between the source/drain and channel to filter different spins, the MR can be restored to ˜2000%, which would be beneficial to the reconfigurable logic circuit application.

Radioactive waste management in Brazil: a realistic view

Energy Technology Data Exchange (ETDEWEB)

Heilbron Filho, Paulo Fernando Lavalle; Perez Guerrero, Jesus Salvador, E-mail: paulo@cnen.gov.br, E-mail: jperez@cnen.gov.br [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil); Xavier, Ana Maria, E-mail: axavier@cnen.gov.br [Comissao Nacional de Energia Nuclear (ESPOA/CNEN-RS), Porto Alegre, RS (Brazil)

2014-07-01

The objective of this article is to present a realistic view of the main issues related to the management of radioactive waste in Brazil as well as a comprehensive picture of the regulatory waste management status in the country and internationally. Technical aspects that must be considered to ensure a safe construction of near surface disposal facilities for radioactive waste of low and medium levels of radiation are addressed. Different types of deposits, the basic regulatory issues involving the licensing of these facilities, the development of a financial compensation model for the Brazilian Municipalities where deposits are to be placed, the importance of the participation of the scientific community and society in the process of radioactive waste site selection and disposal, guidance for the application of the basic requirements of safety and radiation protection, the general safety aspects involved and the current actions for the disposal of radioactive waste in Brazil are highlighted. (author)

Longitudinal phase-space manipulation of ellipsoidal electron bunches in realistic fields

Directory of Open Access Journals (Sweden)

S. B. van der Geer

2006-04-01

Full Text Available Since the recent publication of a practical recipe to create “pancake” electron bunches which evolve into uniformly filled ellipsoids, a number of papers have addressed both an alternative method to create such ellipsoids as well as their behavior in realistic fields. So far, the focus has been on the possibilities to preserve the initial “thermal” transverse emittance. This paper addresses the linear longitudinal phase space of ellipsoidal bunches. It is shown that ellipsoidal bunches allow ballistic compression at subrelativistic energies, without the detrimental effects of nonlinear space-charge forces. This in turn eliminates the need for the large correlated energy spread normally required for longitudinal compression of relativistic particle beams, while simultaneously avoiding all problems related to magnetic compression. Furthermore, the linear space-charge forces of ellipsoidal bunches can be used to reduce the remaining energy spread even further, by carefully choosing the beam transverse size, in a process that is essentially the time-reversed process of the creation of an ellipsoid at the cathode. The feasibility of compression of ellipsoidal bunches is illustrated with a relatively simple setup, consisting of a half-cell S-band photogun and a two-cell booster compressor. Detailed GPT simulations in realistic fields predict that 100 pC ellipsoidal bunches can be ballistically compressed to 100 fs, at a transverse emittance of 0.7   μm, with a final energy of 3.7 MeV and an energy spread of only 50 keV.

Challenges and solutions for realistic room simulation

Science.gov (United States)

Begault, Durand R.

2002-05-01

Virtual room acoustic simulation (auralization) techniques have traditionally focused on answering questions related to speech intelligibility or musical quality, typically in large volumetric spaces. More recently, auralization techniques have been found to be important for the externalization of headphone-reproduced virtual acoustic images. Although externalization can be accomplished using a minimal simulation, data indicate that realistic auralizations need to be responsive to head motion cues for accurate localization. Computational demands increase when providing for the simulation of coupled spaces, small rooms lacking meaningful reverberant decays, or reflective surfaces in outdoor environments. Auditory threshold data for both early reflections and late reverberant energy levels indicate that much of the information captured in acoustical measurements is inaudible, minimizing the intensive computational requirements of real-time auralization systems. Results are presented for early reflection thresholds as a function of azimuth angle, arrival time, and sound-source type, and reverberation thresholds as a function of reverberation time and level within 250-Hz-2-kHz octave bands. Good agreement is found between data obtained in virtual room simulations and those obtained in real rooms, allowing a strategy for minimizing computational requirements of real-time auralization systems.

The effects of presenting multidigit mathematics problems in a realistic context on sixth graders' problem solving

NARCIS (Netherlands)

Hickendorff, M.

2013-01-01

Mathematics education and assessments increasingly involve arithmetic problems presented in context: a realistic situation that requires mathematical modeling. This study assessed the effects of such typical school mathematics contexts on two aspects of problem solving: performance and strategy use.

Robust control of decoherence in realistic one-qubit quantum gates

International Nuclear Information System (INIS)

Protopopescu, V; Perez, R; D'Helon, C; Schmulen, J

2003-01-01

We present an open-loop (bang-bang) scheme to control decoherence in a generic one-qubit quantum gate and implement it in a realistic simulation. The system is consistently described within the spin-boson model, with interactions accounting for both adiabatic and thermal decoherence. The external control is included from the beginning in the Hamiltonian as an independent interaction term. After tracing out the environment modes, reduced equations are obtained for the two-level system in which the effects of both decoherence and external control appear explicitly. The controls are determined exactly from the condition to eliminate decoherence, i.e. to restore unitarity. Numerical simulations show excellent performance and robustness of the proposed control scheme

CASCADE-IMEI: Web site support for student teachers learning Realistic Mathematics Education (RME) in Indonesia

NARCIS (Netherlands)

Zulkardi, Z.; Nieveen, N.M.

2001-01-01

CASCADE-IMEI is a learning environment in the form of a face-to-face course and a web site (www.cascadeimei.com) which aims to support student teachers in Indonesia to learn Realistic Mathematics Education (RME). RME is an instructional theory in mathematics education that was originally developed

Fort Collins Science Center Ecosystem Dynamics branch--interdisciplinary research for addressing complex natural resource issues across landscapes and time

Science.gov (United States)

Bowen, Zachary H.; Melcher, Cynthia P.; Wilson, Juliette T.

2013-01-01

The Ecosystem Dynamics Branch of the Fort Collins Science Center offers an interdisciplinary team of talented and creative scientists with expertise in biology, botany, ecology, geology, biogeochemistry, physical sciences, geographic information systems, and remote-sensing, for tackling complex questions about natural resources. As demand for natural resources increases, the issues facing natural resource managers, planners, policy makers, industry, and private landowners are increasing in spatial and temporal scope, often involving entire regions, multiple jurisdictions, and long timeframes. Needs for addressing these issues include (1) a better understanding of biotic and abiotic ecosystem components and their complex interactions; (2) the ability to easily monitor, assess, and visualize the spatially complex movements of animals, plants, water, and elements across highly variable landscapes; and (3) the techniques for accurately predicting both immediate and long-term responses of system components to natural and human-caused change. The overall objectives of our research are to provide the knowledge, tools, and techniques needed by the U.S. Department of the Interior, state agencies, and other stakeholders in their endeavors to meet the demand for natural resources while conserving biodiversity and ecosystem services. Ecosystem Dynamics scientists use field and laboratory research, data assimilation, and ecological modeling to understand ecosystem patterns, trends, and mechanistic processes. This information is used to predict the outcomes of changes imposed on species, habitats, landscapes, and climate across spatiotemporal scales. The products we develop include conceptual models to illustrate system structure and processes; regional baseline and integrated assessments; predictive spatial and mathematical models; literature syntheses; and frameworks or protocols for improved ecosystem monitoring, adaptive management, and program evaluation. The descriptions

Integrative computational models of cardiac arrhythmias -- simulating the structurally realistic heart

Science.gov (United States)

Trayanova, Natalia A; Tice, Brock M

2009-01-01

Simulation of cardiac electrical function, and specifically, simulation aimed at understanding the mechanisms of cardiac rhythm disorders, represents an example of a successful integrative multiscale modeling approach, uncovering emergent behavior at the successive scales in the hierarchy of structural complexity. The goal of this article is to present a review of the integrative multiscale models of realistic ventricular structure used in the quest to understand and treat ventricular arrhythmias. It concludes with the new advances in image-based modeling of the heart and the promise it holds for the development of individualized models of ventricular function in health and disease. PMID:20628585

3D realistic head model simulation based on transcranial magnetic stimulation.

Science.gov (United States)

Yang, Shuo; Xu, Guizhi; Wang, Lei; Chen, Yong; Wu, Huanli; Li, Ying; Yang, Qingxin

2006-01-01

Transcranial magnetic stimulation (TMS) is a powerful non-invasive tool for investigating functions in the brain. The target inside the head is stimulated with eddy currents induced in the tissue by the time-varying magnetic field. Precise spatial localization of stimulation sites is the key of efficient functional magnetic stimulations. Many researchers devote to magnetic field analysis in empty free space. In this paper, a realistic head model used in Finite Element Method has been developed. The magnetic field inducted in the head bt TMS has been analysed. This three-dimensional simulation is useful for spatial localization of stimulation.

DC electrophoresis and viscosity of realistic salt-free concentrated suspensions: non-equilibrium dissociation-association processes.

Science.gov (United States)

Ruiz-Reina, Emilio; Carrique, Félix; Lechuga, Luis

2014-03-01

Most of the suspensions usually found in industrial applications are concentrated, aqueous and in contact with the atmospheric CO2. The case of suspensions with a high concentration of added salt is relatively well understood and has been considered in many studies. In this work we are concerned with the case of concentrated suspensions that have no ions different than: (1) those stemming from the charged colloidal particles (the added counterions, that counterbalance their surface charge); (2) the H(+) and OH(-) ions from water dissociation, and (3) the ions generated by the atmospheric CO2 contamination. We call this kind of systems "realistic salt-free suspensions". We show some theoretical results about the electrophoretic mobility of a colloidal particle and the electroviscous effect of realistic salt-free concentrated suspensions. The theoretical framework is based on a cell model that accounts for particle-particle interactions in concentrated suspensions, which has been successfully applied to many different phenomena in concentrated suspensions. On the other hand, the water dissociation and CO2 contamination can be described following two different levels of approximation: (a) by local equilibrium mass-action equations, because it is supposed that the reactions are so fast that chemical equilibrium is attained everywhere in the suspension, or (b) by non-equilibrium dissociation-association kinetic equations, because it is considered that some reactions are not rapid enough to ensure local chemical equilibrium. Both approaches give rise to different results in the range from dilute to semidilute suspensions, causing possible discrepancies when comparing standard theories and experiments concerning transport properties of realistic salt-free suspensions. Copyright © 2013 Elsevier Inc. All rights reserved.

Research of shot noise based on realistic nano-MOSFETs

Directory of Open Access Journals (Sweden)

Xiaofei Jia

2017-05-01

Full Text Available Experimental measurements and simulation results have shown that the dominant noise source of current noise changes from thermal noise to shot noise with scaling of MOSFET, and shot noise were suppressed by Fermi and Coulomb interactions. In this paper, Shot noise test system is established, and experimental results proved that shot noise were suppressed, and the expressions of shot noise in realistic nano-MOSFETs are derived with considering Fermi effect, Coulomb interaction and the combination of the both co-existence, respectively. On this basis, the variation of shot noise with voltage, temperature and source-drain doping were researched. The results we obtained are consistent with those from experiments and the theoretically explanation is given. At the same time, the shot noise test system is suitable for traditional nanoscale electronic components; the shot noise model is suitable for nanoscale MOSFET.

Aquatic risk assessment of a realistic exposure to pesticides used in bulb crops: a microcosm study

NARCIS (Netherlands)

Wijngaarden, van R.P.A.; Cuppen, J.G.M.; Arts, G.H.P.; Crum, S.J.H.; Hoorn, van den M.W.; Brink, van den P.J.; Brock, T.C.M.

2004-01-01

The fungicide fluazinam, the insecticide lambda-cyhalothrin, and the herbicides asulam and metamitron were applied to indoor freshwater microcosms (water volume approximately 0.6 m3). The treatment regime was based on a realistic application scenario in tulip cultivation. Concentrations of each

Establishing Upper Limits for Item Ratings for the Angoff Method: Are Resulting Standards More 'Realistic'?

Science.gov (United States)

Reid, Jerry B.

This report investigates an area of uncertainty in using the Angoff method for setting standards, namely whether or not a judge's conceptualizations of borderline group performance are realistic. Ratings are usually made with reference to the performance of this hypothetical group, therefore the Angoff method's success is dependent on this point.…

Meredys, a multi-compartment reaction-diffusion simulator using multistate realistic molecular complexes

Directory of Open Access Journals (Sweden)

Le Novère Nicolas

2010-03-01

Full Text Available Abstract Background Most cellular signal transduction mechanisms depend on a few molecular partners whose roles depend on their position and movement in relation to the input signal. This movement can follow various rules and take place in different compartments. Additionally, the molecules can form transient complexes. Complexation and signal transduction depend on the specific states partners and complexes adopt. Several spatial simulator have been developed to date, but none are able to model reaction-diffusion of realistic multi-state transient complexes. Results Meredys allows for the simulation of multi-component, multi-feature state molecular species in two and three dimensions. Several compartments can be defined with different diffusion and boundary properties. The software employs a Brownian dynamics engine to simulate reaction-diffusion systems at the reactive particle level, based on compartment properties, complex structure, and hydro-dynamic radii. Zeroth-, first-, and second order reactions are supported. The molecular complexes have realistic geometries. Reactive species can contain user-defined feature states which can modify reaction rates and outcome. Models are defined in a versatile NeuroML input file. The simulation volume can be split in subvolumes to speed up run-time. Conclusions Meredys provides a powerful and versatile way to run accurate simulations of molecular and sub-cellular systems, that complement existing multi-agent simulation systems. Meredys is a Free Software and the source code is available at http://meredys.sourceforge.net/.

Precocious realists: perceptual and cognitive characteristics associated with drawing talent in non-autistic children

Science.gov (United States)

Drake, Jennifer E.; Winner, Ellen

2009-01-01

A local processing bias in the block design task and in drawing strategy has been used to account for realistic drawing skill in individuals with autism. We investigated whether the same kind of local processing bias is seen in typically developing children with unusual skill in realistic graphic representation. Forty-three 5–11-year-olds who drew a still life completed a version of the block design task in both standard and segmented form, were tested for their memory for the block design items, and were given the Kaufmann Brief Intelligence Test-II. Children were classified as gifted, moderately gifted or typical on the basis of the level of realism in their drawings. Similar to autistic individuals, the gifted group showed a local processing bias in the block design task. But unlike autistic individuals, the gifted group showed a global advantage in the visual memory task and did not use a local drawing strategy; in addition, their graphic realism skill was related to verbal IQ. Differences in the extent of local processing bias in autistic and typically developing children with drawing talent are discussed. PMID:19528030

The Realistic Versus the Spherical Head Model in EEG Dipole Source Analysis in the Presence of Noise

National Research Council Canada - National Science Library

Vanrumste, Bart

2001-01-01

.... For 27 electrodes, an EEG epoch of one time sample and spatially white Gaussian noise we found that the importance of the realistic head model over the spherical head model reduces by increasing the noise level.

Using Concrete and Realistic Data in Evaluating Initial Visualization Designs

DEFF Research Database (Denmark)

Knudsen, Søren; Pedersen, Jeppe Gerner; Herdal, Thor

2016-01-01

We explore means of designing and evaluating initial visualization ideas, with concrete and realistic data in cases where data is not readily available. Our approach is useful in exploring new domains and avenues for visualization, and contrasts other visualization work, which typically operate...... under the assumption that data has already been collected, and is ready to be visualized. We argue that it is sensible to understand data requirements and evaluate the potential value of visualization before devising means of automatic data collection. We base our exploration on three cases selected...... the design case and problem, the manner in which we collected data, and the findings obtained from evaluations. Afterwards, we describe four factors of our data collection approach, and discuss potential outcomes from it....

Generating realistic environments for cyber operations development, testing, and training

Science.gov (United States)

Berk, Vincent H.; Gregorio-de Souza, Ian; Murphy, John P.

2012-06-01

Training eective cyber operatives requires realistic network environments that incorporate the structural and social complexities representative of the real world. Network trac generators facilitate repeatable experiments for the development, training and testing of cyber operations. However, current network trac generators, ranging from simple load testers to complex frameworks, fail to capture the realism inherent in actual environments. In order to improve the realism of network trac generated by these systems, it is necessary to quantitatively measure the level of realism in generated trac with respect to the environment being mimicked. We categorize realism measures into statistical, content, and behavioral measurements, and propose various metrics that can be applied at each level to indicate how eectively the generated trac mimics the real world.

Fault-Tolerant Robot Programming through Simulation with Realistic Sensor Models

Directory of Open Access Journals (Sweden)

Axel Waggershauser

2008-11-01

Full Text Available We introduce a simulation system for mobile robots that allows a realistic interaction of multiple robots in a common environment. The simulated robots are closely modeled after robots from the EyeBot family and have an identical application programmer interface. The simulation supports driving commands at two levels of abstraction as well as numerous sensors such as shaft encoders, infrared distance sensors, and compass. Simulation of on-board digital cameras via synthetic images allows the use of image processing routines for robot control within the simulation. Specific error models for actuators, distance sensors, camera sensor, and wireless communication have been implemented. Progressively increasing error levels for an application program allows for testing and improving its robustness and fault-tolerance.

In vitro measurement of ambient pressure changes using a realistic clinical setup

DEFF Research Database (Denmark)

Andersen, Klaus Scheldrup; Jensen, Jørgen Arendt

2008-01-01

cosine tapered pulse with a center frequency of 4 MHz and an acoustic pressure of 485 kPa was used for excitation. 64 elements were used in receive and the RF data was filtered and beamformed before further processing. To compensate for variations in bubble response and to make the estimates more robust...... flexible offering completely arbitrary excitation and data acquisition, fast and accurate ambient pressure control, and precise timing. More importantly, it resembles a realistic clinical setup using a single array transducer for transmit and receive. The standard signal processing steps usually seen...

Simulation Evaluation of Controller-Managed Spacing Tools under Realistic Operational Conditions

Science.gov (United States)

Callantine, Todd J.; Hunt, Sarah M.; Prevot, Thomas

2014-01-01

Controller-Managed Spacing (CMS) tools have been developed to aid air traffic controllers in managing high volumes of arriving aircraft according to a schedule while enabling them to fly efficient descent profiles. The CMS tools are undergoing refinement in preparation for field demonstration as part of NASA's Air Traffic Management (ATM) Technology Demonstration-1 (ATD-1). System-level ATD-1 simulations have been conducted to quantify expected efficiency and capacity gains under realistic operational conditions. This paper presents simulation results with a focus on CMS-tool human factors. The results suggest experienced controllers new to the tools find them acceptable and can use them effectively in ATD-1 operations.

Developing a framework for a novel multi-disciplinary, multi-agency intervention(s), to improve medication management in community-dwelling older people on complex medication regimens (MEMORABLE)--a realist synthesis.

Science.gov (United States)

Maidment, Ian; Booth, Andrew; Mullan, Judy; McKeown, Jane; Bailey, Sylvia; Wong, Geoffrey

2017-07-03

Medication-related adverse events have been estimated to be responsible for 5700 deaths and cost the UK £750 million annually. This burden falls disproportionately on older people. Outcomes from interventions to optimise medication management are caused by multiple context-sensitive mechanisms. The MEdication Management in Older people: REalist Approaches BAsed on Literature and Evaluation (MEMORABLE) project uses realist synthesis to understand how, why, for whom and in what context interventions, to improve medication management in older people on complex medication regimes residing in the community, work. This realist synthesis uses secondary data and primary data from interviews to develop the programme theory. A realist logic of analysis will synthesise data both within and across the two data sources to inform the design of a complex intervention(s) to help improve medication management in older people. 1. Literature review The review (using realist synthesis) contains five stages to develop an initial programme theory to understand why processes are more or less successful and under which situations: focussing of the research question; developing the initial programme theory; developing the search strategy; selection and appraisal based on relevance and rigour; and data analysis/synthesis to develop and refine the programme theory and context, intervention and mechanism configurations. 2. Realist interviews Realist interviews will explore and refine our understanding of the programme theory developed from the realist synthesis. Up to 30 older people and their informal carers (15 older people with multi-morbidity, 10 informal carers and 5 older people with dementia), and 20 care staff will be interviewed. 3. Developing framework for the intervention(s) Data from the realist synthesis and interviews will be used to refine the programme theory for the intervention(s) to identify: the mechanisms that need to be 'triggered', and the contexts related to these

The effect of a realistic thermal diffusivity on numerical model of a subducting slab

Science.gov (United States)

Maierova, P.; Steinle-Neumann, G.; Cadek, O.

2010-12-01

A number of numerical studies of subducting slab assume simplified (constant or only depth-dependent) models of thermal conductivity. The available mineral physics data indicate, however, that thermal diffusivity is strongly temperature- and pressure-dependent and may also vary among different mantle materials. In the present study, we examine the influence of realistic thermal properties of mantle materials on the thermal state of the upper mantle and the dynamics of subducting slabs. On the basis of the data published in mineral physics literature we compile analytical relationships that approximate the pressure and temperature dependence of thermal diffusivity for major mineral phases of the mantle (olivine, wadsleyite, ringwoodite, garnet, clinopyroxenes, stishovite and perovskite). We propose a simplified composition of mineral assemblages predominating in the subducting slab and the surrounding mantle (pyrolite, mid-ocean ridge basalt, harzburgite) and we estimate their thermal diffusivity using the Hashin-Shtrikman bounds. The resulting complex formula for the diffusivity of each aggregate is then approximated by a simpler analytical relationship that is used in our numerical model as an input parameter. For the numerical modeling we use the Elmer software (open source finite element software for multiphysical problems, see http://www.csc.fi/english/pages/elmer). We set up a 2D Cartesian thermo-mechanical steady-state model of a subducting slab. The model is partly kinematic as the flow is driven by a boundary condition on velocity that is prescribed on the top of the subducting lithospheric plate. Reology of the material is non-linear and is coupled with the thermal equation. Using the realistic relationship for thermal diffusivity of mantle materials, we compute the thermal and flow fields for different input velocity and age of the subducting plate and we compare the results against the models assuming a constant thermal diffusivity. The importance of the

On realistic size equivalence and shape of spheroidal Saharan mineral dust particles applied in solar and thermal radiative transfer calculations

Directory of Open Access Journals (Sweden)

S. Otto

2011-05-01

Full Text Available Realistic size equivalence and shape of Saharan mineral dust particles are derived from in-situ particle, lidar and sun photometer measurements during SAMUM-1 in Morocco (19 May 2006, dealing with measured size- and altitude-resolved axis ratio distributions of assumed spheroidal model particles. The data were applied in optical property, radiative effect, forcing and heating effect simulations to quantify the realistic impact of particle non-sphericity. It turned out that volume-to-surface equivalent spheroids with prolate shape are most realistic: particle non-sphericity only slightly affects single scattering albedo and asymmetry parameter but may enhance extinction coefficient by up to 10 %. At the bottom of the atmosphere (BOA the Saharan mineral dust always leads to a loss of solar radiation, while the sign of the forcing at the top of the atmosphere (TOA depends on surface albedo: solar cooling/warming over a mean ocean/land surface. In the thermal spectral range the dust inhibits the emission of radiation to space and warms the BOA. The most realistic case of particle non-sphericity causes changes of total (solar plus thermal forcing by 55/5 % at the TOA over ocean/land and 15 % at the BOA over both land and ocean and enhances total radiative heating within the dust plume by up to 20 %. Large dust particles significantly contribute to all the radiative effects reported. They strongly enhance the absorbing properties and forward scattering in the solar and increase predominantly, e.g., the total TOA forcing of the dust over land.

Realistic control considerations for electromagnetically levitated urban transit vehicles

Energy Technology Data Exchange (ETDEWEB)

Billing, J R

1976-04-01

A discussion is given of realistic control considerations of suspension dynamics and vehicle/guideway interaction for electromagnetically-levitated urban transit vehicles in the context of revenue applications. The emphasis is on safety, reliability, and maintainability rather than performance. An example urban transit system is described, and the following considerations of dynamics and control are examined: stability, magnet force requirements, magnet airgap requirements, vehicle ride, and component failures. It is shown that it is a formidable problem to ensure suspension stability under all conditions; that operation on curves is a critical magnet and control system design case; that operation of the magnets in the non-linear regime is unavoidable and that component failures will be a major problem. However, good vehicle ride is to be expected. It is concluded that magnetic levitation suspension technology requires substantial development effort before it can be considered suitable for revenue operation.

Realistic limitations of detecting planets around young active stars

Directory of Open Access Journals (Sweden)

Pinfield D.

2013-04-01

Full Text Available Current planet hunting methods using the radial velocity method are limited to observing middle-aged main-sequence stars where the signatures of stellar activity are much less than on young stars that have just arrived on the main-sequence. In this work we apply our knowledge from the surface imaging of these young stars to place realistic limitations on the possibility of detecting orbiting planets. In general we find that the magnitude of the stellar jitter is directly proportional to the stellar vsini. For G and K dwarfs, we find that it is possible, for models with high stellar activity and low stellar vsini, to be able to detect a 1 MJupiter mass planet within 50 epochs of observations and for the M dwarfs it is possible to detect a habitable zone Earth-like planet in 10s of observational epochs.

Electron distribution in polar heterojunctions within a realistic model

Energy Technology Data Exchange (ETDEWEB)

Tien, Nguyen Thanh, E-mail: thanhtienctu@gmail.com [College of Natural Science, Can Tho University, 3-2 Road, Can Tho City (Viet Nam); Thao, Dinh Nhu [Center for Theoretical and Computational Physics, College of Education, Hue University, 34 Le Loi Street, Hue City (Viet Nam); Thao, Pham Thi Bich [College of Natural Science, Can Tho University, 3-2 Road, Can Tho City (Viet Nam); Quang, Doan Nhat [Institute of Physics, Vietnamese Academy of Science and Technology, 10 Dao Tan Street, Hanoi (Viet Nam)

2015-12-15

We present a theoretical study of the electron distribution, i.e., two-dimensional electron gas (2DEG) in polar heterojunctions (HJs) within a realistic model. The 2DEG is confined along the growth direction by a triangular quantum well with a finite potential barrier and a bent band figured by all confinement sources. Therein, interface polarization charges take a double role: they induce a confining potential and, furthermore, they can make some change in other confinements, e.g., in the Hartree potential from ionized impurities and 2DEG. Confinement by positive interface polarization charges is necessary for the ground state of 2DEG existing at a high sheet density. The 2DEG bulk density is found to be increased in the barrier, so that the scattering occurring in this layer (from interface polarization charges and alloy disorder) becomes paramount in a polar modulation-doped HJ.

On the applicability of the Natori formula to realistic multi-layer quantum well III-V FETs

Science.gov (United States)

Gili, A.; Xanthakis, J. P.

2017-10-01

We investigated the validity of the Natori formalism for realistic multi-layer quantum well FETs. We show that the assumption of a single layer (the channel) carrying all of the current density is far from reality in the sub-threshold region, where in fact most of the current density resides below the channel. Our analysis is based on comparing results of Natori calculations with experimental ones and on comparing with other first-principles calculations. If the Natori calculations are employed in the subthreshold region then a misleadingly small subthreshold slope would be obtained. We propose a way to remedy this inefficiency of this formulation so that it can be applicable to realistic many-layer devices. In particular we show that if the 1-dimensional quantum well of the Natori method enclosing the electron gas is expanded to include the supply layer-usually below the channel- and a proper ab initio potential is used to obtain its eigenvalues, then the Natori formula regains its validity.

Realistic ion optical transfer maps for Super-FRS magnets from numerical field data

Energy Technology Data Exchange (ETDEWEB)

Kazantseva, Erika; Boine-Frankenheim, Oliver [Technische Universitaet Darmstadt (Germany)

2016-07-01

In large aperture accelerators such as Super-FRS, the non-linearity of the magnetic field in bending elements leads to the non-linear beam dynamics, which cannot be described by means of linear ion optics. Existing non-linear approach is based on the Fourier harmonics formalism and is not working if horizontal aperture is bigger as vertical or vice versa. In Super-FRS dipole the horizontal aperture is much bigger than the vertical. Hence, it is necessary to find a way to create the higher order transfer map for this dipole to accurately predict the particle dynamics in the realistic magnetic fields in the whole aperture. The aim of this work is to generate an accurate high order transfer map of magnetic elements from measured or simulated 3D magnetic field data. Using differential algebraic formalism allows generating transfer maps automatically via numerical integration of ODEs of motion in beam physics coordinates along the reference path. To make the transfer map accurate for all particles in the beam, the magnetic field along the integration path should be represented by analytical function, matching with the real field distribution in the volume of interest. Within this work the steps of high order realistic transfer map production starting from the field values on closed box, covering the volume of interest, will be analyzed in detail.

Development of a program theory for shared decision-making: a realist review protocol.

Science.gov (United States)

Groot, Gary; Waldron, Tamara; Carr, Tracey; McMullen, Linda; Bandura, Lori-Ann; Neufeld, Shelley-May; Duncan, Vicky

2017-06-17

The practicality of applying evidence to healthcare systems with the aim of implementing change is an ongoing challenge for practitioners, policy makers, and academics. Shared decision- making (SDM), a method of medical decision-making that allows a balanced relationship between patients, physicians, and other key players in the medical decision process, is purported to improve patient and system outcomes. Despite the oft-mentioned benefits, there are gaps in the current literature between theory and implementation that would benefit from a realist approach given the value of this methodology to analyze complex interventions. In this protocol, we outline a study that will explore: "In which situations, how, why, and for whom does SDM between patients and health care providers contribute to improved decision making?" A seven step iterative process will be described including preliminary theory development, establishment of a search strategy, selection and appraisal of literature, data extraction, analysis and synthesis of extracted results from literature, and formation of a revised program theory with the input of patients, physicians, nurse navigators, and policy makers from a stakeholder session. The goal of the realist review will be to identify and refine a program theory for SDM through the identification of mechanisms which shape the characteristics of when, how, and why SDM will, and will not, work. PROSPERO CRD42017062609.

WE-D-18A-05: Construction of Realistic Liver Phantoms From Patient Images and a Commercial 3D Printer

International Nuclear Information System (INIS)

Leng, S; Vrieze, T; Kuhlmann, J; Yu, L; Matsumoto, J; Morris, J; McCollough, C

2014-01-01

Purpose: To assess image quality and radiation dose reduction in abdominal CT imaging, physical phantoms having realistic background textures and lesions are highly desirable. The purpose of this work was to construct a liver phantom with realistic background and lesions using patient CT images and a 3D printer. Methods: Patient CT images containing liver lesions were segmented into liver tissue, contrast-enhanced vessels, and liver lesions using commercial software (Mimics, Materialise, Belgium). Stereolithography (STL) files of each segmented object were created and imported to a 3D printer (Object350 Connex, Stratasys, MN). After test scans were performed to map the eight available printing materials into CT numbers, printing materials were assigned to each object and a physical liver phantom printed. The printed phantom was scanned on a clinical CT scanner and resulting images were compared with the original patient CT images. Results: The eight available materials used to print the liver phantom had CT number ranging from 62 to 117 HU. In scans of the liver phantom, the liver lesions and veins represented in the STL files were all visible. Although the absolute value of the CT number in the background liver material (approx. 85 HU) was higher than in patients (approx. 40 HU), the difference in CT numbers between lesions and background were representative of the low contrast values needed for optimization tasks. Future work will investigate materials with contrast sufficient to emulate contrast-enhanced arteries. Conclusion: Realistic liver phantoms can be constructed from patient CT images using a commercial 3D printer. This technique may provide phantoms able to determine the effect of radiation dose reduction and noise reduction techniques on the ability to detect subtle liver lesions in the context of realistic background textures

WE-D-18A-05: Construction of Realistic Liver Phantoms From Patient Images and a Commercial 3D Printer

Energy Technology Data Exchange (ETDEWEB)

Leng, S; Vrieze, T; Kuhlmann, J; Yu, L; Matsumoto, J; Morris, J; McCollough, C [Mayo Clinic, Rochester, MN (United States)

2014-06-15

Purpose: To assess image quality and radiation dose reduction in abdominal CT imaging, physical phantoms having realistic background textures and lesions are highly desirable. The purpose of this work was to construct a liver phantom with realistic background and lesions using patient CT images and a 3D printer. Methods: Patient CT images containing liver lesions were segmented into liver tissue, contrast-enhanced vessels, and liver lesions using commercial software (Mimics, Materialise, Belgium). Stereolithography (STL) files of each segmented object were created and imported to a 3D printer (Object350 Connex, Stratasys, MN). After test scans were performed to map the eight available printing materials into CT numbers, printing materials were assigned to each object and a physical liver phantom printed. The printed phantom was scanned on a clinical CT scanner and resulting images were compared with the original patient CT images. Results: The eight available materials used to print the liver phantom had CT number ranging from 62 to 117 HU. In scans of the liver phantom, the liver lesions and veins represented in the STL files were all visible. Although the absolute value of the CT number in the background liver material (approx. 85 HU) was higher than in patients (approx. 40 HU), the difference in CT numbers between lesions and background were representative of the low contrast values needed for optimization tasks. Future work will investigate materials with contrast sufficient to emulate contrast-enhanced arteries. Conclusion: Realistic liver phantoms can be constructed from patient CT images using a commercial 3D printer. This technique may provide phantoms able to determine the effect of radiation dose reduction and noise reduction techniques on the ability to detect subtle liver lesions in the context of realistic background textures.

A comparison of spent fuel shipping cask response to 10 CFR 71 normal conditions and realistic hot day extremes

International Nuclear Information System (INIS)

Manson, S.J.; Gianoulakis, S.E.

1994-04-01

An examination of the effect of a realistic (though conservative) hot day environment on the thermal transient behavior of spent fuel shipping casks is made. These results are compared to those that develop under the prescribed normal thermal condition of 10 CFR 71. Of specific concern are the characteristics of propagating thermal waves, which are set up by diurnal variations of temperature and insolation in the outdoor environment. In order to arrive at a realistic approximation of these variations on a conservative hot day, actual temperature and insolation measurements have been obtained from the National Climatic Data Center (NCDC) for representatively hot and high heat flux days. Thus, the use of authentic meteorological data ensures the realistic approach sought. Further supporting the desired realism of the modeling effort is the use of realistic cask configurations in which multiple laminations of structural, shielding, and other materials are expected to attenuate the propagating thermal waves. The completed analysis revealed that the majority of wall temperatures, for a wide variety of spent fuel shipping cask configurations, fall well below those predicted by enforcement of the regulatory environmental conditions of 10 CFR 71. It was found that maximum temperatures at the cask surface occasionally lie above temperatures predicted under the prescribed regulatory conditions. However, the temperature differences are small enough that the normal conservative assumptions that are made in the course of typical cask evaluations should correct for any potential violations. The analysis demonstrates that diurnal temperature variations that penetrate the cask wall all have maxima substantially less than the corresponding regulatory solutions. Therefore it is certain that vital cask components and the spent fuel itself will not exceed the temperatures calculated by use of the conditions of 10 CFR 71

Microscopic study of the α-16O interaction on the basis of the realistic effective interaction

International Nuclear Information System (INIS)

Yamaguchi, Shinichiro; Horiuchi, Hisashi; Yabana, Kazuhiro.

1989-01-01

We calculate the α- 16 O complex potential by the totally microscopic method where we use the many-body theory taking into account the Pauli principle explicitly and the realistic effective interactions. The comparison of the theoretical inter-nucleus potential with the phenomenological 'unique' optical potential is performed. (author)

How to estimate realistic energy savings in Energy Performance Certificates

DEFF Research Database (Denmark)

Wittchen, Kim Bjarne; Altmann, Nagmeh; Berecová, Monika

Given the fact that most MS use fixed or other kinds of default values as boundary condition input for energy performance calculations, it is not surprising that the calculated energy performance differs from the measured energy consumption. As a consequence, the calculated energy savings due...... stationary calculation tools using monthly average values. The optimum solution for energy performance certificates and calculating realistic energy savings is to have two calculations. One calculation, using default values to calculate the label itself, and one with actual input parameters for calculating...... energy performance before and after implementing energy saving measures. Actual values though, may be difficult to identify, so there is a need to make adaptations to reality easy. Even if actual values are available, there are still issues that cause calculated energy savings to differ from the obtained...

Convective aggregation in idealised models and realistic equatorial cases

Science.gov (United States)

Holloway, Chris

2015-04-01

Idealised explicit convection simulations of the Met Office Unified Model are shown to exhibit spontaneous self-aggregation in radiative-convective equilibrium, as seen previously in other models in several recent studies. This self-aggregation is linked to feedbacks between radiation, surface fluxes, and convection, and the organization is intimately related to the evolution of the column water vapour (CWV) field. To investigate the relevance of this behaviour to the real world, these idealized simulations are compared with five 15-day cases of real organized convection in the tropics, including multiple simulations of each case testing sensitivities of the convective organization and mean states to interactive radiation, interactive surface fluxes, and evaporation of rain. Despite similar large-scale forcing via lateral boundary conditions, systematic differences in mean CWV, CWV distribution shape, and the length scale of CWV features are found between the different sensitivity runs, showing that there are at least some similarities in sensitivities to these feedbacks in both idealized and realistic simulations.

Finite Time Blowup in a Realistic Food-Chain Model

KAUST Repository

Parshad, Rana; Ait Abderrahmane, Hamid; Upadhyay, Ranjit Kumar; Kumari, Nitu

2013-01-01

We investigate a realistic three-species food-chain model, with generalist top predator. The model based on a modified version of the Leslie-Gower scheme incorporates mutual interference in all the three populations and generalizes several other known models in the ecological literature. We show that the model exhibits finite time blowup in certain parameter range and for large enough initial data. This result implies that finite time blowup is possible in a large class of such three-species food-chain models. We propose a modification to the model and prove that the modified model has globally existing classical solutions, as well as a global attractor. We reconstruct the attractor using nonlinear time series analysis and show that it pssesses rich dynamics, including chaos in certain parameter regime, whilst avoiding blowup in any parameter regime. We also provide estimates on its fractal dimension as well as provide numerical simulations to visualise the spatiotemporal chaos.

Finite Time Blowup in a Realistic Food-Chain Model

KAUST Repository

Parshad, Rana

2013-05-19

We investigate a realistic three-species food-chain model, with generalist top predator. The model based on a modified version of the Leslie-Gower scheme incorporates mutual interference in all the three populations and generalizes several other known models in the ecological literature. We show that the model exhibits finite time blowup in certain parameter range and for large enough initial data. This result implies that finite time blowup is possible in a large class of such three-species food-chain models. We propose a modification to the model and prove that the modified model has globally existing classical solutions, as well as a global attractor. We reconstruct the attractor using nonlinear time series analysis and show that it pssesses rich dynamics, including chaos in certain parameter regime, whilst avoiding blowup in any parameter regime. We also provide estimates on its fractal dimension as well as provide numerical simulations to visualise the spatiotemporal chaos.

Two politicians in a realistic experiment: attraction, discrepancy, intensity of delivery, and attitude change

OpenAIRE

Wiegman, O.

1985-01-01

The leader of the Socialists in the Dutch Parliament and his Liberal opponent participated in this realistic experiment. Identical TV interviews with the two politicians were recorded and shown to subjects of both parties. The intensity of delivery was also varied: emotional versus rational. Our findgins indicated that the experimental interveiw changed the attitude of the subjects. In addition, support was found for a second hypothesis: Attitude change was greater for the attractive source f...

Effects of realistic topography on the ground motion of the Colombian Andes - A case study at the Aburrá Valley, Antioquia

Science.gov (United States)

Restrepo, Doriam; Bielak, Jacobo; Serrano, Ricardo; Gómez, Juan; Jaramillo, Juan

2016-03-01

This paper presents a set of deterministic 3-D ground motion simulations for the greater metropolitan area of Medellín in the Aburrá Valley, an earthquake-prone region of the Colombian Andes that exhibits moderate-to-strong topographic irregularities. We created the velocity model of the Aburrá Valley region (version 1) using the geological structures as a basis for determining the shear wave velocity. The irregular surficial topography is considered by means of a fictitious domain strategy. The simulations cover a 50 × 50 × 25 km3 volume, and four Mw = 5 rupture scenarios along a segment of the Romeral fault, a significant source of seismic activity in Colombia. In order to examine the sensitivity of ground motion to the irregular topography and the 3-D effects of the valley, each earthquake scenario was simulated with three different models: (i) realistic 3-D velocity structure plus realistic topography, (ii) realistic 3-D velocity structure without topography, and (iii) homogeneous half-space with realistic topography. Our results show how surface topography affects the ground response. In particular, our findings highlight the importance of the combined interaction between source-effects, source-directivity, focusing, soft-soil conditions, and 3-D topography. We provide quantitative evidence of this interaction and show that topographic amplification factors can be as high as 500 per cent at some locations. In other areas within the valley, the topographic effects result in relative reductions, but these lie in the 0-150 per cent range.

The SMART personalised self-management system for congestive heart failure: results of a realist evaluation.

Science.gov (United States)

Bartlett, Yvonne K; Haywood, Annette; Bentley, Claire L; Parker, Jack; Hawley, Mark S; Mountain, Gail A; Mawson, Susan

2014-11-25

Technology has the potential to provide support for self-management to people with congestive heart failure (CHF). This paper describes the results of a realist evaluation of the SMART Personalised Self-Management System (PSMS) for CHF. The PSMS was used, at home, by seven people with CHF. Data describing system usage and usability as well as questionnaire and interview data were evaluated in terms of the context, mechanism and outcome hypotheses (CMOs) integral to realist evaluation. The CHF PSMS improved heart failure related knowledge in those with low levels of knowledge at baseline, through providing information and quizzes. Furthermore, participants perceived the self-regulatory aspects of the CHF PSMS as being useful in encouraging daily walking. The CMOs were revised to describe the context of use, and how this influences both the mechanisms and the outcomes. Participants with CHF engaged with the PSMS despite some technological problems. Some positive effects on knowledge were observed as well as the potential to assist with changing physical activity behaviour. Knowledge of CHF and physical activity behaviour change are important self-management targets for CHF, and this study provides evidence to direct the further development of a technology to support these targets.

Determination of Realistic Fire Scenarios in Spacecraft

Science.gov (United States)

Dietrich, Daniel L.; Ruff, Gary A.; Urban, David

2013-01-01

This paper expands on previous work that examined how large a fire a crew member could successfully survive and extinguish in the confines of a spacecraft. The hazards to the crew and equipment during an accidental fire include excessive pressure rise resulting in a catastrophic rupture of the vehicle skin, excessive temperatures that burn or incapacitate the crew (due to hyperthermia), carbon dioxide build-up or accumulation of other combustion products (e.g. carbon monoxide). The previous work introduced a simplified model that treated the fire primarily as a source of heat and combustion products and sink for oxygen prescribed (input to the model) based on terrestrial standards. The model further treated the spacecraft as a closed system with no capability to vent to the vacuum of space. The model in the present work extends this analysis to more realistically treat the pressure relief system(s) of the spacecraft, include more combustion products (e.g. HF) in the analysis and attempt to predict the fire spread and limiting fire size (based on knowledge of terrestrial fires and the known characteristics of microgravity fires) rather than prescribe them in the analysis. Including the characteristics of vehicle pressure relief systems has a dramatic mitigating effect by eliminating vehicle overpressure for all but very large fires and reducing average gas-phase temperatures.

A Data-Driven Approach to Realistic Shape Morphing

KAUST Repository

Gao, Lin; Lai, Yu-Kun; Huang, Qi-Xing; Hu, Shi-Min

2013-01-01

Morphing between 3D objects is a fundamental technique in computer graphics. Traditional methods of shape morphing focus on establishing meaningful correspondences and finding smooth interpolation between shapes. Such methods however only take geometric information as input and thus cannot in general avoid producing unnatural interpolation, in particular for large-scale deformations. This paper proposes a novel data-driven approach for shape morphing. Given a database with various models belonging to the same category, we treat them as data samples in the plausible deformation space. These models are then clustered to form local shape spaces of plausible deformations. We use a simple metric to reasonably represent the closeness between pairs of models. Given source and target models, the morphing problem is casted as a global optimization problem of finding a minimal distance path within the local shape spaces connecting these models. Under the guidance of intermediate models in the path, an extended as-rigid-as-possible interpolation is used to produce the final morphing. By exploiting the knowledge of plausible models, our approach produces realistic morphing for challenging cases as demonstrated by various examples in the paper. © 2013 The Eurographics Association and Blackwell Publishing Ltd.

Uncovering gender discrimination cues in a realistic setting.

Science.gov (United States)

Dupuis-Roy, Nicolas; Fortin, Isabelle; Fiset, Daniel; Gosselin, Frédéric

2009-02-10

Which face cues do we use for gender discrimination? Few studies have tried to answer this question and the few that have tried typically used only a small set of grayscale stimuli, often distorted and presented a large number of times. Here, we reassessed the importance of facial cues for gender discrimination in a more realistic setting. We applied Bubbles-a technique that minimizes bias toward specific facial features and does not necessitate the distortion of stimuli-to a set of 300 color photographs of Caucasian faces, each presented only once to 30 participants. Results show that the region of the eyes and the eyebrows-probably in the light-dark channel-is the most important facial cue for accurate gender discrimination; and that the mouth region is driving fast correct responses (but not fast incorrect responses)-the gender discrimination information in the mouth region is concentrated in the red-green color channel. Together, these results suggest that, when color is informative in the mouth region, humans use it and respond rapidly; and, when it's not informative, they have to rely on the more robust but more sluggish luminance information in the eye-eyebrow region.

A Data-Driven Approach to Realistic Shape Morphing

KAUST Repository

Gao, Lin

2013-05-01

Morphing between 3D objects is a fundamental technique in computer graphics. Traditional methods of shape morphing focus on establishing meaningful correspondences and finding smooth interpolation between shapes. Such methods however only take geometric information as input and thus cannot in general avoid producing unnatural interpolation, in particular for large-scale deformations. This paper proposes a novel data-driven approach for shape morphing. Given a database with various models belonging to the same category, we treat them as data samples in the plausible deformation space. These models are then clustered to form local shape spaces of plausible deformations. We use a simple metric to reasonably represent the closeness between pairs of models. Given source and target models, the morphing problem is casted as a global optimization problem of finding a minimal distance path within the local shape spaces connecting these models. Under the guidance of intermediate models in the path, an extended as-rigid-as-possible interpolation is used to produce the final morphing. By exploiting the knowledge of plausible models, our approach produces realistic morphing for challenging cases as demonstrated by various examples in the paper. © 2013 The Eurographics Association and Blackwell Publishing Ltd.

Co2(nu2)-o Quenching Rate Coefficient Derived from Coincidental SABER-TIMED and Fort Collins Lidar Observations of the Mesosphere and Lower Thermosphere

Science.gov (United States)

Feofilov, A. G.; Kutepov, A. A.; She, C.-Y.; Smith, A. K.; Pesnell, W. D.; Goldberg, R. A.

2012-01-01

Among the processes governing the energy balance in the mesosphere and lower thermosphere (MLT), the quenching of CO2(nu2) vibrational levels by collisions with O atoms plays an important role. However, there is a factor of 3-4 discrepancy between the laboratory measurements of the CO2-O quenching rate coefficient, k(sub VT),and its value estimated from the atmospheric observations. In this study, we retrieve k(sub VT) in the altitude region85-105 km from the coincident SABER/TIMED and Fort Collins sodium lidar observations by minimizing the difference between measured and simulated broadband limb 15 micron radiation. The averaged k(sub VT) value obtained in this work is 6.5 +/- 1.5 X 10(exp -12) cubic cm/s that is close to other estimates of this coefficient from the atmospheric observations.However, the retrieved k(sub VT) also shows altitude dependence and varies from 5.5 1 +/-1 10(exp -12) cubic cm/s at 90 km to 7.9 +/- 1.2 10(exp -12) cubic cm/s at 105 km. Obtained results demonstrate the deficiency in current non-LTE modeling of the atmospheric 15 micron radiation, based on the application of the CO2-O quenching and excitation rates, which are linked by the detailed balance relation. We discuss the possible model improvements, among them accounting for the interaction of the non-thermal oxygen atoms with CO2 molecules.

A realist evaluation of social prescribing: an exploration into the context and mechanisms underpinning a pathway linking primary care with the voluntary sector.

Science.gov (United States)

Bertotti, Marcello; Frostick, Caroline; Hutt, Patrick; Sohanpal, Ratna; Carnes, Dawn

2018-05-01

This article adopts a realist approach to evaluate a social prescribing pilot in the areas of Hackney and City in London (United Kingdom). It unpacks the contextual factors and mechanisms that influenced the development of this pilot for the benefits of GPs, commissioners and practitioners, and reflects on the realist approach to evaluation as a tool for the evaluation of health interventions. Primary care faces considerable challenges including the increase in long-term conditions, GP consultation rates, and widening health inequalities. With its emphasis on linking primary care to non-clinical community services via a social prescribing coordinator (SPC), some models of social prescribing could contribute to reduce the burden on primary care, tackle health inequalities and encourage people to make greater use of non-clinical forms of support. This realist analysis was based on qualitative interviews with users, commissioners, a GP survey, focus groups and learning events to explore stakeholders' experience. To enable a detailed analysis, we adapted the realist approach by subdividing the social prescribing pathway into stages, each with contextual factors, mechanisms and outcomes. SPCs were pivotal to the effective functioning of the social prescribing service and responsible for the activation and initial beneficial impact on users. Although social prescribing shows significant potential for the benefit of patients and primary care, several challenges need to be considered and overcome, including 'buy in' from some GPs, branding, and funding for the third sector in a context where social care cuts are severely affecting the delivery of health care. With its emphasis on context and mechanisms, the realist evaluation approach is useful in understanding how to identify and improve health interventions, and analyse in greater detail the contribution of different stakeholders. As the SPC is central to social prescribing, more needs to be done to understand their role

More Realistic Face Model Surface Improves Relevance of Pediatric In-Vitro Aerosol Studies.

Science.gov (United States)

Amirav, Israel; Halamish, Asaf; Gorenberg, Miguel; Omar, Hamza; Newhouse, Michael T

2015-01-01

Various hard face models are commonly used to evaluate the efficiency of aerosol face masks. Softer more realistic "face" surface materials, like skin, deform upon mask application and should provide more relevant in-vitro tests. Studies that simultaneously take into consideration many of the factors characteristic of the in vivo face are lacking. These include airways, various application forces, comparison of various devices, comparison with a hard-surface model and use of a more representative model face based on large numbers of actual faces. To compare mask to "face" seal and aerosol delivery of two pediatric masks using a soft vs. a hard, appropriately representative, pediatric face model under various applied forces. Two identical face models and upper airways replicas were constructed, the only difference being the suppleness and compressibility of the surface layer of the "face." Integrity of the seal and aerosol delivery of two different masks [AeroChamber (AC) and SootherMask (SM)] were compared using a breath simulator, filter collection and realistic applied forces. The soft "face" significantly increased the delivery efficiency and the sealing characteristics of both masks. Aerosol delivery with the soft "face" was significantly greater for the SM compared to the AC (pmasks was observed with the hard "face." The material and pliability of the model "face" surface has a significant influence on both the seal and delivery efficiency of face masks. This finding should be taken into account during in-vitro aerosol studies.

Evaluation of health promotion in schools: a realistic evaluation approach using mixed methods

Science.gov (United States)

2010-01-01

Background Schools are key settings for health promotion (HP) but the development of suitable approaches for evaluating HP in schools is still a major topic of discussion. This article presents a research protocol of a program developed to evaluate HP. After reviewing HP evaluation issues, the various possible approaches are analyzed and the importance of a realistic evaluation framework and a mixed methods (MM) design are demonstrated. Methods/Design The design is based on a systemic approach to evaluation, taking into account the mechanisms, context and outcomes, as defined in realistic evaluation, adjusted to our own French context using an MM approach. The characteristics of the design are illustrated through the evaluation of a nationwide HP program in French primary schools designed to enhance children's social, emotional and physical health by improving teachers' HP practices and promoting a healthy school environment. An embedded MM design is used in which a qualitative data set plays a supportive, secondary role in a study based primarily on a different quantitative data set. The way the qualitative and quantitative approaches are combined through the entire evaluation framework is detailed. Discussion This study is a contribution towards the development of suitable approaches for evaluating HP programs in schools. The systemic approach of the evaluation carried out in this research is appropriate since it takes account of the limitations of traditional evaluation approaches and considers suggestions made by the HP research community. PMID:20109202

Evidence of a shared purpose, critical reflection, innovation and leadership in interprofessional healthcare teams: a realist synthesis.

Science.gov (United States)

Sims, Sarah; Hewitt, Gillian; Harris, Ruth

2015-05-01

Realist synthesis is a theory-driven approach for evaluating complex interventions using empirical evidence, which seeks an explanatory analysis of who a complex intervention works for, how, why, and in what circumstances. Interprofessional teamworking in healthcare is one such complex intervention, as teams are influenced by social and organizational factors, which makes them highly variable and context dependent. This article concludes a series of four articles that report on a realist synthesis of interprofessional teamworking. The synthesis identified 13 mechanisms that are reported in the literature to be the underlying processes through which interprofessional teamworking produces its effects. This article explores four of these mechanisms: a shared purpose; critical reflection; innovation; and leadership. These mechanisms together explain how a team sets and maintains its focus and direction. This article highlights that whilst many assumptions are made within the healthcare literature about how these mechanisms operate within teams, these assumptions are not always founded upon strong empirical evidence.

Effect on Hyalella azteca after pulse exposure to environmentally realistic concentrations of permethrin

DEFF Research Database (Denmark)

Pedersen, Signe; Palmqvist, Annemette; Forbes, Valery E.

. H. azteca is widely distributed through North America where it is common as a food source for birds, fish and large invertebrates and is therefore considered as an ecologically important organism. In addition H. azteca has been extensively used as a test organism and is generally sensitive...... realistic pulse exposure and concentration of a pyrethroid pesticide, permethrin, on the freshwater amphipod Hyalella azteca. Permethrin is a pyrethroid insecticide used in mosquito control and to control a wide range of insect pests on various crops and is known to be highly toxic to aquatic invertebrates...

Comparison of Sigma-Point and Extended Kalman Filters on a Realistic Orbit Determination Scenario

Science.gov (United States)

Gaebler, John; Hur-Diaz. Sun; Carpenter, Russell

2010-01-01

Sigma-point filters have received a lot of attention in recent years as a better alternative to extended Kalman filters for highly nonlinear problems. In this paper, we compare the performance of the additive divided difference sigma-point filter to the extended Kalman filter when applied to orbit determination of a realistic operational scenario based on the Interstellar Boundary Explorer mission. For the scenario studied, both filters provided equivalent results. The performance of each is discussed in detail.

Effective realistic interactions for low momentum Hilbert spaces

International Nuclear Information System (INIS)

Weber, Dennis

2012-01-01

Realistic nucleon-nucleon potentials are an essential ingredient of modern microscopic many-body calculations. These potentials can be represented in two different ways: operator representation or matrix element representation. In operator representation the potential is represented by a set of quantum mechanical operators while in matrix element representation it is defined by the matrix elements in a given basis. Many modern potentials are constructed directly in matrix element representation. While the matrix element representation can be calculated from the operator representation, the determination of the operator representation from the matrix elements is more difficult. Some methods to solve the nuclear many-body problem, such as Fermionic Molecular Dynamics (FMD) or the Green's Function Monte Carlo (GFMC) method, however require explicitly the operator representation of the potential, as they do not work in a fixed many-body basis. It is therefore desirable to derive an operator representation also for the interactions given by matrix elements. In this work a method is presented which allows the derivation of an approximate operator representation starting from the momentum space partial wave matrix elements of the interaction. For that purpose an ansatz for the operator representation is chosen. The parameters in the ansatz are determined by a fit to the partial wave matrix elements. Since a perfect reproduction of the matrix elements in general cannot be achieved with a finite number of operators and the quality of the results depends on the choice of the ansatz, the obtained operator representation is tested in nuclear many-body calculations and the results are compared with those from the initial interaction matrix elements. For the calculation of the nucleon-nucleon scattering phase shifts and the deuteron properties a computer code written within this work is used. For larger nuclei the No Core Shell Model (NCSM) and FMD are applied. The described

Realistic Job Previews: Can a Procedure to Reduce Turnover Also Influence the Relationship between Abilities and Performance?

Science.gov (United States)

Wanous, John P.

1978-01-01

The current state of theory, research, and practice in realistic job previews (RJP) for recruitment is still immature. RJPs have been used to reduce employee turnover, but not necessarily to influence the job performance of newcomers. This research looks at the background, research results, and unanswered issues. (Author/RK)

Semantic modeling for theory clarification: The realist vs liberal international relations perspective

Energy Technology Data Exchange (ETDEWEB)

Bray, O.H. [Sandia National Labs., Albuquerque, NM (United States)]|[Univ. of New Mexico, Albuquerque, NM (United States). Political Science Dept.

1994-04-01

This paper describes a natural language based, semantic information modeling methodology and explores its use and value in clarifying and comparing political science theories and frameworks. As an example, the paper uses this methodology to clarify and compare some of the basic concepts and relationships in the realist (e.g. Waltz) and the liberal (e.g. Rosenau) paradigms for international relations. The methodology can provide three types of benefits: (1) it can clarify and make explicit exactly what is meant by a concept; (2) it can often identify unanticipated implications and consequence of concepts and relationships; and (3) it can help in identifying and operationalizing testable hypotheses.

Heterogeneous Deployment to Meet Traffic Demand in a Realistic LTE Urban Scenario

DEFF Research Database (Denmark)

Coletti, Claudio; Hu, Liang; Nguyen, Huan Cong

2012-01-01

growth of mo-bile broadband traffic. Emphasis is put on how to optimally as-sign the spectrum for the different networks layers in an evolved HetNet including outdoor and indoor small cells. The study is conducted for a “Hot-Zone” scenario, i.e. a high-traffic area within a realistic dense urban...... performance with a minimum user data rate of 1 Mbps is achieved when deploying small cells on dedicated channels rather than co-channel deployment. Fur-thermore, the joint pico and femto deployment turns out to be the right trade-off between increased base station density and en-hanced network capacity....

Time-scale invariance as an emergent property in a perceptron with realistic, noisy neurons.

Science.gov (United States)

Buhusi, Catalin V; Oprisan, Sorinel A

2013-05-01

In most species, interval timing is time-scale invariant: errors in time estimation scale up linearly with the estimated duration. In mammals, time-scale invariance is ubiquitous over behavioral, lesion, and pharmacological manipulations. For example, dopaminergic drugs induce an immediate, whereas cholinergic drugs induce a gradual, scalar change in timing. Behavioral theories posit that time-scale invariance derives from particular computations, rules, or coding schemes. In contrast, we discuss a simple neural circuit, the perceptron, whose output neurons fire in a clockwise fashion based on the pattern of coincidental activation of its input neurons. We show numerically that time-scale invariance emerges spontaneously in a perceptron with realistic neurons, in the presence of noise. Under the assumption that dopaminergic drugs modulate the firing of input neurons, and that cholinergic drugs modulate the memory representation of the criterion time, we show that a perceptron with realistic neurons reproduces the pharmacological clock and memory patterns, and their time-scale invariance, in the presence of noise. These results suggest that rather than being a signature of higher order cognitive processes or specific computations related to timing, time-scale invariance may spontaneously emerge in a massively connected brain from the intrinsic noise of neurons and circuits, thus providing the simplest explanation for the ubiquity of scale invariance of interval timing. Copyright © 2013 Elsevier B.V. All rights reserved.

Ideology and Interaction: Debating Determinisms in Literacy Studies

Science.gov (United States)

Collin, Ross; Street, Brian V.

2014-01-01

In this exchange, Street and Collin debate the merits of the interaction model of literacy that Collin outlined in a recent issue of Reading Research Quarterly. Built as a complement and a counter to Street's ideological model of literacy, Collin's interaction model defines literacies as technologies that coevolve with sociocultural…

75 FR 13647 - Qualification of Drivers; Exemption Applications; Diabetes

Science.gov (United States)

2010-03-22

... CDL from Pennsylvania. James H. Collins Mr. Collins, 49, has had ITDM since 1986. His endocrinologist... stable control of his diabetes using insulin, and is able to drive a CMV safely. Mr. Collins meets the... retinopathy. He holds a Class C operator's license from Illinois. Jim D. Thomas Mr. Thomas, 72, has had ITDM...

Microscopic calculations of elastic scattering between light nuclei based on a realistic nuclear interaction

Energy Technology Data Exchange (ETDEWEB)

Dohet-Eraly, Jeremy [F.R.S.-FNRS (Belgium); Sparenberg, Jean-Marc; Baye, Daniel, E-mail: jdoheter@ulb.ac.be, E-mail: jmspar@ulb.ac.be, E-mail: dbaye@ulb.ac.be [Physique Nucleaire et Physique Quantique, CP229, Universite Libre de Bruxelles (ULB), B-1050 Brussels (Belgium)

2011-09-16

The elastic phase shifts for the {alpha} + {alpha} and {alpha} + {sup 3}He collisions are calculated in a cluster approach by the Generator Coordinate Method coupled with the Microscopic R-matrix Method. Two interactions are derived from the realistic Argonne potentials AV8' and AV18 with the Unitary Correlation Operator Method. With a specific adjustment of correlations on the {alpha} + {alpha} collision, the phase shifts for the {alpha} + {alpha} and {alpha} + {sup 3}He collisions agree rather well with experimental data.

Developing workshop module of realistic mathematics education: Follow-up workshop

Science.gov (United States)

Palupi, E. L. W.; Khabibah, S.

2018-01-01

Realistic Mathematics Education (RME) is a learning approach which fits the aim of the curriculum. The success of RME in teaching mathematics concepts, triggering students’ interest in mathematics and teaching high order thinking skills to the students will make teachers start to learn RME. Hence, RME workshop is often offered and done. This study applied development model proposed by Plomp. Based on the study by RME team, there are three kinds of RME workshop: start-up workshop, follow-up workshop, and quality boost. However, there is no standardized or validated module which is used in that workshops. This study aims to develop a module of RME follow-up workshop which is valid and can be used. Plopm’s developmental model includes materials analysis, design, realization, implementation, and evaluation. Based on the validation, the developed module is valid. While field test shows that the module can be used effectively.

The construction of 'realistic' four-dimensional strings through orbifolds

International Nuclear Information System (INIS)

Font, A.; Quevedo, F.; Sierra, A.

1990-01-01

We discuss the construction of 'realistic' lower rank 4-dimensional strings, through symmetric orbifolds with background fields. We present Z 3 three-generation SU(3)xSU(2)xU(1) models as well as models incorporating a left-right SU(2) L xSU(2) R xU(1) B-L symmetry in which proton stability is automatically guaranteed. Conformal field theory selection rules are used to find the flat directions to all orders which lead to these low-rank models and to study the relevant Yukawa couplings. A hierarchical structure of quark-lepton masses appears naturally in some models. We also present a detailed study of the structure of the Z 3 xZ 3 orbifold including the generalized GSO projection, the effect of discrete torsion and the conformal field theory Yukawa coupling selection rules. All these points are illustrated with a three-generation Z 3 xZ 3 model. We have made an effort to write a self-contained presentation in order to make this material available to non-string experts interested in the phenomenological aspects of this theory. (orig.)

The construction of ``realistic'' four-dimensional strings through orbifolds

Science.gov (United States)

Font, A.; Ibáñez, L. E.; Quevedo, F.; Sierra, A.

1990-02-01

We discuss the construction of "realistic" lower rank 4-dimensional strings, through symmetric orbifolds with background fields. We present Z 3 three-generation SU(3) × SU(2) × U(1) models as well as models incorporating a left-right SU(2) L × SU(2) R × U(1) B-L symmetry in which proton stability is automatically guaranteed. Conformal field theory selection rules are used to find the flat directions to all orders which lead to these low-rank models and to study the relevant Yukawa couplings. A hierarchical structure of quark-lepton masses appears naturally in some models. We also present a detailed study of the structure of the Z 3 × Z 3 orbifold including the generalized GSO projection, the effect of discrete torsion and the conformal field theory Yukawa coupling selection rules. All these points are illustrated with a three-generation Z 3 × Z 3 model. We have made an effort to write a self-contained presentation in order to make this material available to non-string experts interested in the phenomenological aspects of this theory.

Simulation of microarray data with realistic characteristics

Directory of Open Access Journals (Sweden)

Lehmussola Antti

2006-07-01

Full Text Available Abstract Background Microarray technologies have become common tools in biological research. As a result, a need for effective computational methods for data analysis has emerged. Numerous different algorithms have been proposed for analyzing the data. However, an objective evaluation of the proposed algorithms is not possible due to the lack of biological ground truth information. To overcome this fundamental problem, the use of simulated microarray data for algorithm validation has been proposed. Results We present a microarray simulation model which can be used to validate different kinds of data analysis algorithms. The proposed model is unique in the sense that it includes all the steps that affect the quality of real microarray data. These steps include the simulation of biological ground truth data, applying biological and measurement technology specific error models, and finally simulating the microarray slide manufacturing and hybridization. After all these steps are taken into account, the simulated data has realistic biological and statistical characteristics. The applicability of the proposed model is demonstrated by several examples. Conclusion The proposed microarray simulation model is modular and can be used in different kinds of applications. It includes several error models that have been proposed earlier and it can be used with different types of input data. The model can be used to simulate both spotted two-channel and oligonucleotide based single-channel microarrays. All this makes the model a valuable tool for example in validation of data analysis algorithms.

Does therapeutic writing help people with long-term conditions? Systematic review, realist synthesis and economic considerations.

Science.gov (United States)

Nyssen, Olga P; Taylor, Stephanie J C; Wong, Geoff; Steed, Elizabeth; Bourke, Liam; Lord, Joanne; Ross, Carol A; Hayman, Sheila; Field, Victoria; Higgins, Ailish; Greenhalgh, Trisha; Meads, Catherine

2016-04-01

Writing therapy to improve physical or mental health can take many forms. The most researched model of therapeutic writing (TW) is unfacilitated, individual expressive writing (written emotional disclosure). Facilitated writing activities are less widely researched. Databases, including MEDLINE, EMBASE, PsycINFO, Linguistics and Language Behaviour Abstracts, Allied and Complementary Medicine Database and Cumulative Index to Nursing and Allied Health Literature, were searched from inception to March 2013 (updated January 2015). Four TW practitioners provided expert advice. Study procedures were conducted by one reviewer and checked by a second. Randomised controlled trials (RCTs) and non-randomised comparative studies were included. Quality was appraised using the Cochrane risk-of-bias tool. Unfacilitated and facilitated TW studies were analysed separately under International Classification of Diseases, Tenth Revision chapter headings. Meta-analyses were performed where possible using RevMan version 5.2.6 (RevMan 2012, The Cochrane Collaboration, The Nordic Cochrane Centre, Copenhagen, Denmark). Costs were estimated from a UK NHS perspective and three cost-consequence case studies were prepared. Realist synthesis followed Realist and Meta-narrative Evidence Synthesis: Evolving Standards guidelines. To review the clinical effectiveness and cost-effectiveness of TW for people with long-term conditions (LTCs) compared with no writing, or other controls, reporting any relevant clinical outcomes. To conduct a realist synthesis to understand how TW might work, and for whom. From 14,658 unique citations, 284 full-text papers were reviewed and 64 studies (59 RCTs) were included in the final effectiveness reviews. Five studies examined facilitated TW; these were extremely heterogeneous with unclear or high risk of bias but suggested that facilitated TW interventions may be beneficial in individual LTCs. Unfacilitated expressive writing was examined in 59 studies of variable

Effects of the neonicotinoid pesticide thiamethoxam at field-realistic levels on microcolonies of Bombus terrestris worker bumble bees.

Science.gov (United States)

Laycock, Ian; Cotterell, Katie C; O'Shea-Wheller, Thomas A; Cresswell, James E

2014-02-01

Neonicotinoid pesticides are currently implicated in the decline of wild bee populations. Bumble bees, Bombus spp., are important wild pollinators that are detrimentally affected by ingestion of neonicotinoid residues. To date, imidacloprid has been the major focus of study into the effects of neonicotinoids on bumble bee health, but wild populations are increasingly exposed to alternative neonicotinoids such as thiamethoxam. To investigate whether environmentally realistic levels of thiamethoxam affect bumble bee performance over a realistic exposure period, we exposed queenless microcolonies of Bombus terrestris L. workers to a wide range of dosages up to 98 μgkg(-1) in dietary syrup for 17 days. Results showed that bumble bee workers survived fewer days when presented with syrup dosed at 98 μg thiamethoxamkg(-1), while production of brood (eggs and larvae) and consumption of syrup and pollen in microcolonies were significantly reduced by thiamethoxam only at the two highest concentrations (39, 98 μgkg(-1)). In contrast, we found no detectable effect of thiamethoxam at levels typically found in the nectars of treated crops (between 1 and 11 μgkg(-1)). By comparison with published data, we demonstrate that during an exposure to field-realistic concentrations lasting approximately two weeks, brood production in worker bumble bees is more sensitive to imidacloprid than thiamethoxam. We speculate that differential sensitivity arises because imidacloprid produces a stronger repression of feeding in bumble bees than thiamethoxam, which imposes a greater nutrient limitation on production of brood. © 2013 Published by Elsevier Inc.

A realist review of the partograph: when and how does it work for labour monitoring?

Science.gov (United States)

Bedwell, Carol; Levin, Karen; Pett, Celia; Lavender, Dame Tina

2017-01-13

The partograph (or partogram) is recommended by the World Health Organisation (WHO), for monitoring labour wellbeing and progress. Concerns about limitations in the way the partograph is used in the clinical context and the potential impact on its effectiveness have led to this realist systematic review of partograph use. This review aimed to answer two key questions, 1) What is it about the partograph that works (or does not work); for whom does it work; and in what circumstances? 2) What are the essential inputs required for the partograph to work? A comprehensive search strategy encompassed key databases; including papers of varying methodologies. Papers were selected for inclusion if the focus of the paper was the partograph and related to context, mechanism or outcome. Ninety five papers were included for data synthesis. Two authors completed data extraction and synthesis. The evidence synthesis relates the evidence to identified theories of health worker acceptability, health system support, effective referral systems, human resources and health worker competence, highlighting barriers and facilitators. This first comprehensive realist synthesis of the partograph, provides the international community of maternity clinicians with a picture of potential issues and solutions related to successful labour recording and management, which is also translatable to other monitoring approaches.

Recent advances on thermohydraulic simulation of HTR-10 nuclear reactor core using realistic CFD approach

Energy Technology Data Exchange (ETDEWEB)

Silva, Alexandro S., E-mail: alexandrossilva@ifba.edu.br [Instituto Federal de Educacao, Ciencia e Tecnologia da Bahia (IFBA), Vitoria da Conquista, BA (Brazil); Mazaira, Leorlen Y.R., E-mail: leored1984@gmail.com, E-mail: cgh@instec.cu [Instituto Superior de Tecnologias y Ciencias Aplicadas (INSTEC), La Habana (Cuba); Dominguez, Dany S.; Hernandez, Carlos R.G., E-mail: alexandrossilva@gmail.com, E-mail: dsdominguez@gmail.com [Universidade Estadual de Santa Cruz (UESC), Ilheus, BA (Brazil). Programa de Pos-Graduacao em Modelagem Computacional; Lira, Carlos A.B.O., E-mail: cabol@ufpe.br [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil)

2015-07-01

High-temperature gas-cooled reactors (HTGRs) have the potential to be used as possible energy generation sources in the near future, owing to their inherently safe performance by using a large amount of graphite, low power density design, and high conversion efficiency. However, safety is the most important issue for its commercialization in nuclear energy industry. It is very important for safety design and operation of an HTGR to investigate its thermal-hydraulic characteristics. In this article, it was performed the thermal-hydraulic simulation of compressible flow inside the core of the pebble bed reactor HTR (High Temperature Reactor)-10 using Computational Fluid Dynamics (CFD). The realistic approach was used, where every closely packed pebble is realistically modelled considering a graphite layer and sphere of fuel. Due to the high computational cost is impossible simulate the full core; therefore, the geometry used is a FCC (Face Centered Cubic) cell with the half height of the core, with 21 layers and 95 pebbles. The input data used were taken from the thermal-hydraulic IAEA Bechmark. The results show the profiles of velocity and temperature of the coolant in the core, and the temperature distribution inside the pebbles. The maximum temperatures in the pebbles do not exceed the allowable limit for this type of nuclear fuel. (author)

Recent advances on thermohydraulic simulation of HTR-10 nuclear reactor core using realistic CFD approach

International Nuclear Information System (INIS)

Silva, Alexandro S.; Mazaira, Leorlen Y.R.; Dominguez, Dany S.; Hernandez, Carlos R.G.

2015-01-01

High-temperature gas-cooled reactors (HTGRs) have the potential to be used as possible energy generation sources in the near future, owing to their inherently safe performance by using a large amount of graphite, low power density design, and high conversion efficiency. However, safety is the most important issue for its commercialization in nuclear energy industry. It is very important for safety design and operation of an HTGR to investigate its thermal-hydraulic characteristics. In this article, it was performed the thermal-hydraulic simulation of compressible flow inside the core of the pebble bed reactor HTR (High Temperature Reactor)-10 using Computational Fluid Dynamics (CFD). The realistic approach was used, where every closely packed pebble is realistically modelled considering a graphite layer and sphere of fuel. Due to the high computational cost is impossible simulate the full core; therefore, the geometry used is a FCC (Face Centered Cubic) cell with the half height of the core, with 21 layers and 95 pebbles. The input data used were taken from the thermal-hydraulic IAEA Bechmark. The results show the profiles of velocity and temperature of the coolant in the core, and the temperature distribution inside the pebbles. The maximum temperatures in the pebbles do not exceed the allowable limit for this type of nuclear fuel. (author)

Treacher-Collins syndrome

Science.gov (United States)

... member. This condition may vary in severity from generation to generation and from person to person. Symptoms Symptoms may ... NIH MedlinePlus Magazine Read more Health Topics A-Z Read more A.D.A.M., Inc. is ...

Treacher Collins Syndrome

Science.gov (United States)

... developmental and educational handicaps. Will my child be deaf? The term “deaf” applies only to very severe hearing losses in ... craniofacial center where genetic consultation, evaluation, and treatment planning will be provided by an experienced multidisciplinary staff ...

A realistic validation study of a new nitrogen multiple-breath washout system.

Directory of Open Access Journals (Sweden)

Florian Singer

Full Text Available BACKGROUND: For reliable assessment of ventilation inhomogeneity, multiple-breath washout (MBW systems should be realistically validated. We describe a new lung model for in vitro validation under physiological conditions and the assessment of a new nitrogen (N(2MBW system. METHODS: The N(2MBW setup indirectly measures the N(2 fraction (F(N2 from main-stream carbon dioxide (CO(2 and side-stream oxygen (O(2 signals: F(N2 = 1-F(O2-F(CO2-F(Argon. For in vitro N(2MBW, a double chamber plastic lung model was filled with water, heated to 37°C, and ventilated at various lung volumes, respiratory rates, and F(CO2. In vivo N(2MBW was undertaken in triplets on two occasions in 30 healthy adults. Primary N(2MBW outcome was functional residual capacity (FRC. We assessed in vitro error (√[difference](2 between measured and model FRC (100-4174 mL, and error between tests of in vivo FRC, lung clearance index (LCI, and normalized phase III slope indices (S(acin and S(cond. RESULTS: The model generated 145 FRCs under BTPS conditions and various breathing patterns. Mean (SD error was 2.3 (1.7%. In 500 to 4174 mL FRCs, 121 (98% of FRCs were within 5%. In 100 to 400 mL FRCs, the error was better than 7%. In vivo FRC error between tests was 10.1 (8.2%. LCI was the most reproducible ventilation inhomogeneity index. CONCLUSION: The lung model generates lung volumes under the conditions encountered during clinical MBW testing and enables realistic validation of MBW systems. The new N(2MBW system reliably measures lung volumes and delivers reproducible LCI values.

Developing Teaching Material Based on Realistic Mathematics Andoriented to the Mathematical Reasoning and Mathematical Communication

OpenAIRE

Habsah, Fitria

2017-01-01

This research aims to produce mathematics textbook for grade VII junior high school students based on realistic mathematics and oriented to the mathematical reasoning and mathematical communication. The quality is determined based on Nieveen criteria, including validity, practicality, and effectiveness.This study was a research and development and used Borg & Gall model. The subject of this research were the students of SMPN 2 Pujon-Kabupaten Malang, that is 30 students in an experimental cla...

Computation of Surface Laplacian for tri-polar ring electrodes on high-density realistic geometry head model.

Science.gov (United States)

Junwei Ma; Han Yuan; Sunderam, Sridhar; Besio, Walter; Lei Ding

2017-07-01

Neural activity inside the human brain generate electrical signals that can be detected on the scalp. Electroencephalograph (EEG) is one of the most widely utilized techniques helping physicians and researchers to diagnose and understand various brain diseases. Due to its nature, EEG signals have very high temporal resolution but poor spatial resolution. To achieve higher spatial resolution, a novel tri-polar concentric ring electrode (TCRE) has been developed to directly measure Surface Laplacian (SL). The objective of the present study is to accurately calculate SL for TCRE based on a realistic geometry head model. A locally dense mesh was proposed to represent the head surface, where the local dense parts were to match the small structural components in TCRE. Other areas without dense mesh were used for the purpose of reducing computational load. We conducted computer simulations to evaluate the performance of the proposed mesh and evaluated possible numerical errors as compared with a low-density model. Finally, with achieved accuracy, we presented the computed forward lead field of SL for TCRE for the first time in a realistic geometry head model and demonstrated that it has better spatial resolution than computed SL from classic EEG recordings.

Validation of a realistic powder sample using data from DMC at PSI

International Nuclear Information System (INIS)

Willendrup, Peter; Filges, Uwe; Keller, Lukas; Farhi, Emmanuel; Lefmann, Kim

2006-01-01

We present results of a virtual experiment, carried out by means of a McStas simulation of the powder diffractometer DMC at PSI, using the new powder sample component PowderN. This powder component takes tabulated crystallographic input to define realistic powder lines. The simulated output data from the virtual experiment on the compound Na 2 Ca 3 Al 2 F 14 are compared to real measurement data from the DMC instrument. The agreement is very good with respect to peak positions, widths, background intensity and relative peak intensities. This work represents an important step towards reliable virtual experiments and also act as a validation of the PowderN sample component in McStas

Validation of a realistic powder sample using data from DMC at PSI

Energy Technology Data Exchange (ETDEWEB)

Willendrup, Peter [Riso National Laboratory, Frederiksborgvej 399, DK-4000 Roskilde (Denmark)]. E-mail: peter.willendrup@risoe.dk; Filges, Uwe [Laboratory for Development and Methods ETHZ and PSI CH-5232 Villigen PSI (Switzerland); Keller, Lukas [Laboratory for Neutron Scattering ETHZ and PSI CH-5232 Villigen PSI (Switzerland); Farhi, Emmanuel [Institut Laue-Langevin (ILL) Grenoble, 6 rue J. Horowitz, BP 156, 38042 Grenoble Cedex 9 (France); Lefmann, Kim [Riso National Laboratory, Frederiksborgvej 399, DK-4000 Roskilde (Denmark)

2006-11-15

We present results of a virtual experiment, carried out by means of a McStas simulation of the powder diffractometer DMC at PSI, using the new powder sample component PowderN. This powder component takes tabulated crystallographic input to define realistic powder lines. The simulated output data from the virtual experiment on the compound Na{sub 2}Ca{sub 3}Al{sub 2}F{sub 14} are compared to real measurement data from the DMC instrument. The agreement is very good with respect to peak positions, widths, background intensity and relative peak intensities. This work represents an important step towards reliable virtual experiments and also act as a validation of the PowderN sample component in McStas.

Validation of a realistic powder sample using data from DMC at PSI

DEFF Research Database (Denmark)

Willendrup, Peter Kjær; Filges, U.; Keller, L.

2006-01-01

We present results of a virtual experiment, carried out by means of a McStas simulation of the powder diffractometer DMC at PSI, using the new powder sample component PowderN. This powder component takes tabulated crystallographic input to define realistic powder lines. The simulated output data...... from the virtual experiment on the compound Na2Ca3Al2F14 are compared to real measurement data from the DMC instrument. The agreement is very good with respect to peak positions, widths, background intensity and relative peak intensities. This work represents an important step towards reliable virtual...... experiments and also act as a validation of the PowderN sample component in McStas....

Impacts of Realistic Urban Heating, Part I: Spatial Variability of Mean Flow, Turbulent Exchange and Pollutant Dispersion

Science.gov (United States)

Nazarian, Negin; Martilli, Alberto; Kleissl, Jan

2018-03-01

As urbanization progresses, more realistic methods are required to analyze the urban microclimate. However, given the complexity and computational cost of numerical models, the effects of realistic representations should be evaluated to identify the level of detail required for an accurate analysis. We consider the realistic representation of surface heating in an idealized three-dimensional urban configuration, and evaluate the spatial variability of flow statistics (mean flow and turbulent fluxes) in urban streets. Large-eddy simulations coupled with an urban energy balance model are employed, and the heating distribution of urban surfaces is parametrized using sets of horizontal and vertical Richardson numbers, characterizing thermal stratification and heating orientation with respect to the wind direction. For all studied conditions, the thermal field is strongly affected by the orientation of heating with respect to the airflow. The modification of airflow by the horizontal heating is also pronounced for strongly unstable conditions. The formation of the canyon vortices is affected by the three-dimensional heating distribution in both spanwise and streamwise street canyons, such that the secondary vortex is seen adjacent to the windward wall. For the dispersion field, however, the overall heating of urban surfaces, and more importantly, the vertical temperature gradient, dominate the distribution of concentration and the removal of pollutants from the building canyon. Accordingly, the spatial variability of concentration is not significantly affected by the detailed heating distribution. The analysis is extended to assess the effects of three-dimensional surface heating on turbulent transfer. Quadrant analysis reveals that the differential heating also affects the dominance of ejection and sweep events and the efficiency of turbulent transfer (exuberance) within the street canyon and at the roof level, while the vertical variation of these parameters is less

One-dimensional solar radiative transfer: Perturbation approach and its application to independent-pixel calculations for realistic cloud fields

International Nuclear Information System (INIS)

Jerg, Matthias; Trautmann, Thomas

2007-01-01

The radiative transfer perturbation theory (RTPT), which has already been introduced in atmospheric radiative transfer several years ago, is applied to cloud related problems. The RTPT requires the solution of the radiative transfer equation in the forward and the adjoint mode. The basic principles of this technique are presented as well as its extensions to isotropic surface reflection and its conjunction with the Hermite interpolation. This set of methods is applied to different atmospheric conditions including realistic cloud scenes. The results are compared with the usual (forward) independent-pixel calculations with respect to errors of individual pixels and domain-averaged values. The RTPT turns out to be sufficiently accurate in the case the clouds' internal vertical variations remain moderate. It is also shown that, depending on the specific radiative transfer problem, the RTPT can offer some advantages on computational speed. However, the limitations of the RTPT with regard to realistic clouds are addressed as well

Realistic neurons can compute the operations needed by quantum probability theory and other vector symbolic architectures.

Science.gov (United States)

Stewart, Terrence C; Eliasmith, Chris

2013-06-01

Quantum probability (QP) theory can be seen as a type of vector symbolic architecture (VSA): mental states are vectors storing structured information and manipulated using algebraic operations. Furthermore, the operations needed by QP match those in other VSAs. This allows existing biologically realistic neural models to be adapted to provide a mechanistic explanation of the cognitive phenomena described in the target article by Pothos & Busemeyer (P&B).

Hydrostatic Equilibria of Rotating Stars with Realistic Equation of State

Science.gov (United States)

Yasutake, Nobutoshi; Fujisawa, Kotaro; Okawa, Hirotada; Yamada, Shoichi

Stars rotate generally, but it is a non-trivial issue to obtain hydrostatic equilibria for rapidly rotating stars theoretically, especially for baroclinic cases, in which the pressure depends not only on the density, but also on the temperature and compositions. It is clear that the stellar structures with realistic equation of state are the baroclinic cases, but there are not so many studies for such equilibria. In this study, we propose two methods to obtain hydrostatic equilibria considering rotation and baroclinicity, namely the weak-solution method and the strong-solution method. The former method is based on the variational principle, which is also applied to the calculation of the inhomogeneous phases, known as the pasta structures, in crust of neutron stars. We found this method might break the balance equation locally, then introduce the strong-solution method. Note that our method is formulated in the mass coordinate, and it is hence appropriated for the stellar evolution calculations.

Realistic 3D Terrain Roaming and Real-Time Flight Simulation

Science.gov (United States)

Que, Xiang; Liu, Gang; He, Zhenwen; Qi, Guang

2014-12-01

This paper presents an integrate method, which can provide access to current status and the dynamic visible scanning topography, to enhance the interactive during the terrain roaming and real-time flight simulation. A digital elevation model and digital ortho-photo map data integrated algorithm is proposed as the base algorithm for our approach to build a realistic 3D terrain scene. A new technique with help of render to texture and head of display for generating the navigation pane is used. In the flight simulating, in order to eliminate flying "jump", we employs the multidimensional linear interpolation method to adjust the camera parameters dynamically and steadily. Meanwhile, based on the principle of scanning laser imaging, we draw pseudo color figures by scanning topography in different directions according to the real-time flying status. Simulation results demonstrate that the proposed algorithm is prospective for applications and the method can improve the effect and enhance dynamic interaction during the real-time flight.

Characteristics of 454 pyrosequencing data--enabling realistic simulation with flowsim.

Science.gov (United States)

Balzer, Susanne; Malde, Ketil; Lanzén, Anders; Sharma, Animesh; Jonassen, Inge

2010-09-15

The commercial launch of 454 pyrosequencing in 2005 was a milestone in genome sequencing in terms of performance and cost. Throughout the three available releases, average read lengths have increased to approximately 500 base pairs and are thus approaching read lengths obtained from traditional Sanger sequencing. Study design of sequencing projects would benefit from being able to simulate experiments. We explore 454 raw data to investigate its characteristics and derive empirical distributions for the flow values generated by pyrosequencing. Based on our findings, we implement Flowsim, a simulator that generates realistic pyrosequencing data files of arbitrary size from a given set of input DNA sequences. We finally use our simulator to examine the impact of sequence lengths on the results of concrete whole-genome assemblies, and we suggest its use in planning of sequencing projects, benchmarking of assembly methods and other fields. Flowsim is freely available under the General Public License from http://blog.malde.org/index.php/flowsim/.

Realistic noise-tolerant randomness amplification using finite number of devices

Science.gov (United States)

Brandão, Fernando G. S. L.; Ramanathan, Ravishankar; Grudka, Andrzej; Horodecki, Karol; Horodecki, Michał; Horodecki, Paweł; Szarek, Tomasz; Wojewódka, Hanna

2016-04-01

Randomness is a fundamental concept, with implications from security of modern data systems, to fundamental laws of nature and even the philosophy of science. Randomness is called certified if it describes events that cannot be pre-determined by an external adversary. It is known that weak certified randomness can be amplified to nearly ideal randomness using quantum-mechanical systems. However, so far, it was unclear whether randomness amplification is a realistic task, as the existing proposals either do not tolerate noise or require an unbounded number of different devices. Here we provide an error-tolerant protocol using a finite number of devices for amplifying arbitrary weak randomness into nearly perfect random bits, which are secure against a no-signalling adversary. The correctness of the protocol is assessed by violating a Bell inequality, with the degree of violation determining the noise tolerance threshold. An experimental realization of the protocol is within reach of current technology.

The continuous-variable Deutsch–Jozsa algorithm using realistic quantum systems

International Nuclear Information System (INIS)

Wagner, Rob C; Kendon, Viv M

2012-01-01

This paper is a study of the continuous-variable Deutsch–Jozsa algorithm. First, we review an existing version of the algorithm for qunat states (Pati and Braunstein 2002 arXiv:0207108v1), and then, we present a realistic version of the Deutsch–Jozsa algorithm for continuous variables, which can be implemented in a physical quantum system given the appropriate oracle. Under these conditions, we have a probabilistic algorithm for deciding the function with a very high success rate with a single call to the oracle. Finally, we look at the effects of errors in both of these continuous-variable algorithms and how they affect the chances of success. We find that the algorithm is generally robust for errors in initialization and the oracle, but less so for errors in the measurement apparatus and the Fourier transform. This article is part of a special issue of Journal of Physics A: Mathematical and Theoretical devoted to ‘Coherent states: mathematical and physical aspects’. (paper)

Magnetic reconnection in the low solar chromosphere with a more realistic radiative cooling model

Science.gov (United States)

Ni, Lei; Lukin, Vyacheslav S.; Murphy, Nicholas A.; Lin, Jun

2018-04-01

Magnetic reconnection is the most likely mechanism responsible for the high temperature events that are observed in strongly magnetized locations around the temperature minimum in the low solar chromosphere. This work improves upon our previous work [Ni et al., Astrophys. J. 852, 95 (2018)] by using a more realistic radiative cooling model computed from the OPACITY project and the CHIANTI database. We find that the rate of ionization of the neutral component of the plasma is still faster than recombination within the current sheet region. For low β plasmas, the ionized and neutral fluid flows are well-coupled throughout the reconnection region resembling the single-fluid Sweet-Parker model dynamics. Decoupling of the ion and neutral inflows appears in the higher β case with β0=1.46 , which leads to a reconnection rate about three times faster than the rate predicted by the Sweet-Parker model. In all cases, the plasma temperature increases with time inside the current sheet, and the maximum value is above 2 ×104 K when the reconnection magnetic field strength is greater than 500 G. While the more realistic radiative cooling model does not result in qualitative changes of the characteristics of magnetic reconnection, it is necessary for studying the variations of the plasma temperature and ionization fraction inside current sheets in strongly magnetized regions of the low solar atmosphere. It is also important for studying energy conversion during the magnetic reconnection process when the hydrogen-dominated plasma approaches full ionization.

The three stages of building and testing mid-level theories in a realist RCT: a theoretical and methodological case-example.

Science.gov (United States)

Jamal, Farah; Fletcher, Adam; Shackleton, Nichola; Elbourne, Diana; Viner, Russell; Bonell, Chris

2015-10-15

Randomised controlled trials (RCTs) of social interventions are often criticised as failing to open the 'black box' whereby they only address questions about 'what works' without explaining the underlying processes of implementation and mechanisms of action, and how these vary by contextual characteristics of person and place. Realist RCTs are proposed as an approach to evaluation science that addresses these gaps while preserving the strengths of RCTs in providing evidence with strong internal validity in estimating effects. In the context of growing interest in designing and conducting realist trials, there is an urgent need to offer a worked example to provide guidance on how such an approach might be practically taken forward. The aim of this paper is to outline a three-staged theoretical and methodological process of undertaking a realist RCT using the example of the evaluation of a whole-school restorative intervention aiming to reduce aggression and bullying in English secondary schools. First, informed by the findings of our initial pilot trial and sociological theory, we elaborate our theory of change and specific a priori hypotheses about how intervention mechanisms interact with context to produce outcomes. Second, we describe how we will use emerging findings from the integral process evaluation within the RCT to refine, and add to, these a priori hypotheses before the collection of quantitative, follow-up data. Third, we will test our hypotheses using a combination of process and outcome data via quantitative analyses of effect mediation (examining mechanisms) and moderation (examining contextual contingencies). The results are then used to refine and further develop the theory of change. The aim of the realist RCT approach is thus not merely to assess whether the intervention is effective or not, but to develop empirically informed mid-range theory through a three-stage process. There are important implications for those involved with reporting and

Larval dispersal modeling of pearl oyster Pinctada margaritifera following realistic environmental and biological forcing in Ahe atoll lagoon.

Directory of Open Access Journals (Sweden)

Yoann Thomas

Full Text Available Studying the larval dispersal of bottom-dwelling species is necessary to understand their population dynamics and optimize their management. The black-lip pearl oyster (Pinctada margaritifera is cultured extensively to produce black pearls, especially in French Polynesia's atoll lagoons. This aquaculture relies on spat collection, a process that can be optimized by understanding which factors influence larval dispersal. Here, we investigate the sensitivity of P. margaritifera larval dispersal kernel to both physical and biological factors in the lagoon of Ahe atoll. Specifically, using a validated 3D larval dispersal model, the variability of lagoon-scale connectivity is investigated against wind forcing, depth and location of larval release, destination location, vertical swimming behavior and pelagic larval duration (PLD factors. The potential connectivity was spatially weighted according to both the natural and cultivated broodstock densities to provide a realistic view of connectivity. We found that the mean pattern of potential connectivity was driven by the southwest and northeast main barotropic circulation structures, with high retention levels in both. Destination locations, spawning sites and PLD were the main drivers of potential connectivity, explaining respectively 26%, 59% and 5% of the variance. Differences between potential and realistic connectivity showed the significant contribution of the pearl oyster broodstock location to its own dynamics. Realistic connectivity showed larger larval supply in the western destination locations, which are preferentially used by farmers for spat collection. In addition, larval supply in the same sectors was enhanced during summer wind conditions. These results provide new cues to understanding the dynamics of bottom-dwelling populations in atoll lagoons, and show how to take advantage of numerical models for pearl oyster management.

Didactic Contracts in Realistic Mathematics Education Teaching Practice in Indonesia: A lesson on addition

DEFF Research Database (Denmark)

Putra, Zetra Hainul

combinations that make ten based on a Palembang traditional food, pempek, and tablets of medicine. The result shows that some features such as formulation and validation appear during the teaching and learning process. The students are able to produce combinations that make ten individually and collectively......This paper aims to investigate characterize features of didactic contracts in realistic mathematics education teaching practice in Indonesia in the case of a lesson on addition. We just focus on some episodes of 26 first grade students and a female teacher from SDN 197 Palembang learning...

Generating Geospatially Realistic Driving Patterns Derived From Clustering Analysis Of Real EV Driving Data

DEFF Research Database (Denmark)

Pedersen, Anders Bro; Aabrandt, Andreas; Østergaard, Jacob

2014-01-01

In order to provide a vehicle fleet that realistically represents the predicted Electric Vehicle (EV) penetration for the future, a model is required that mimics people driving behaviour rather than simply playing back collected data. When the focus is broadened from on a traditional user...... scales, which calls for a statistically correct, yet flexible model. This paper describes a method for modelling EV, based on non-categorized data, which takes into account the plug in locations of the vehicles. By using clustering analysis to extrapolate and classify the primary locations where...

Using realist review to inform intervention development: methodological illustration and conceptual platform for collaborative care in offender mental health.

Science.gov (United States)

Pearson, M; Brand, S L; Quinn, C; Shaw, J; Maguire, M; Michie, S; Briscoe, S; Lennox, C; Stirzaker, A; Kirkpatrick, T; Byng, R

2015-09-28

This paper reports how we used a realist review, as part of a wider project to improve collaborative mental health care for prisoners with common mental health problems, to develop a conceptual platform. The importance of offenders gaining support for their mental health, and the need for practitioners across the health service, the criminal justice system, and the third sector to work together to achieve this is recognised internationally. However, the literature does not provide coherent analyses of how these ambitions can be achieved. This paper demonstrates how a realist review can be applied to inform complex intervention development that spans different locations, organisations, professions, and care sectors. We applied and developed a realist review for the purposes of intervention development, using a three-stage process. (1) An iterative database search strategy (extending beyond criminal justice and offender health) and groups of academics, practitioners, and people with lived experience were used to identify explanatory accounts (n = 347). (2) From these accounts, we developed consolidated explanatory accounts (n = 75). (3) The identified interactions between practitioners and offenders (within their organisational, social, and cultural contexts) were specified in a conceptual platform. We also specify, step by step, how these explanatory accounts were documented, consolidated, and built into a conceptual platform. This addresses an important methodological gap for social scientists and intervention developers about how to develop and articulate programme and implementation theory underpinning complex interventions. An integrated person-centred system is proposed to improve collaborative mental health care for offenders with common mental health problems (near to and after release) by achieving consistency between the goals of different sectors and practitioners, enabling practitioners to apply scientific and experiential knowledge in working

Risk in Science Instruction. The Realist and Constructivist Paradigms of Risk

Science.gov (United States)

Hansen, Julia; Hammann, Marcus

2017-11-01

Risk is always present in people's lives: diseases, new technologies, socio-scientific issues (SSIs) such as climate change, and advances in medicine—to name just a few examples—all carry risks. To be able to navigate risks in everyday life, as well as to participate in social debate on risk-related issues, students need to develop risk competence. Science education can be a powerful tool in supporting students' risk competence, which is an important component of scientific literacy. As there are different definitions of risk within the scientific community, the aims of this article are (1) to review the literature on two major theoretical frameworks for conceptualising risk, the realist, and the constructivist paradigms of risk and (2) to connect both in order to suggest a working definition of what can be understood as risk competence in science instruction.

The Formation of Teacher Work Teams under Adverse Conditions: Towards a More Realistic Scenario for Schools in Distress

Science.gov (United States)

Mintrop, Rick; Charles, Jessica

2017-01-01

Group formation studies are rare in the literature on teacher professional learning communities (PLCs). But they are needed to render realistic scenarios and design interventions for practitioners who work in schools where teachers encounter distress and social adversity. Under these conditions, we may need approaches to PLC development that are…

A Bio-Realistic Analog CMOS Cochlea Filter With High Tunability and Ultra-Steep Roll-Off.

Science.gov (United States)

Wang, Shiwei; Koickal, Thomas Jacob; Hamilton, Alister; Cheung, Rebecca; Smith, Leslie S

2015-06-01

This paper presents the design and experimental results of a cochlea filter in analog very large scale integration (VLSI) which highly resembles physiologically measured response of the mammalian cochlea. The filter consists of three specialized sub-filter stages which respectively provide passive response in low frequencies, actively tunable response in mid-band frequencies and ultra-steep roll-off at transition frequencies from pass-band to stop-band. The sub-filters are implemented in balanced ladder topology using floating active inductors. Measured results from the fabricated chip show that wide range of mid-band tuning including gain tuning of over 20 dB, Q factor tuning from 2 to 19 as well as the bio-realistic center frequency shift are achieved by adjusting only one circuit parameter. Besides, the filter has an ultra-steep roll-off reaching over 300 dB/dec. By changing biasing currents, the filter can be configured to operate with center frequencies from 31 Hz to 8 kHz. The filter is 9th order, consumes 59.5 ∼ 90.0 μW power and occupies 0.9 mm2 chip area. A parallel bank of the proposed filter can be used as the front-end in hearing prosthesis devices, speech processors as well as other bio-inspired auditory systems owing to its bio-realistic behavior, low power consumption and small size.

Considering dynamic friction and proper structural response in hydraulic load cases for realistic piping design

International Nuclear Information System (INIS)

Diesselhorst, T.; Diatschuk, P.; Schnellhammer, W.

2005-01-01

Concerning the design for hydraulic load cases there is always a sequence of fluid- and structural dynamic calculations, where the structural vibrations are induced by the time depending fluid forces. Therefore, in order to prevent excessive structural reactions, it is most important to avoid conservative fluid dynamic results. That refers to the maximum value of the pressure surge as well as to the damping of pressure oscillations. This is especially relevant in case of fluid-structure resonance. To meet these requirements the effect of dynamic wall friction was implemented in our fluid dynamic code. Thus, a more realistic damping behavior of the fluid forces was achieved. In the structural analysis code the damping of the pipe structure could be more accurate adapted to the real conditions. Additionally the local damping by viscous damper was included in the model. At supports now non-linear behavior like clearances can be simulated. The possibility of coupled calculation was installed to consider the effect of fluid structure interaction. The programmed effects are validated against measurement results from power plant systems. The favorable effects of the program improvements are demonstrated by typical examples. These included the realistic damping of pressure oscillations as well as a case of fluid-structure resonance. Additionally the effectiveness of the improved models of piping supports is demonstrated. (authors)

A realistic extension of gauge-mediated SUSY-breaking model with superconformal hidden sector

International Nuclear Information System (INIS)

Asano, Masaki; Hisano, Junji; Okada, Takashi; Sugiyama, Shohei

2009-01-01

The sequestering of supersymmetry (SUSY) breaking parameters, which is induced by superconformal hidden sector, is one of the solutions for the μ/B μ problem in gauge-mediated SUSY-breaking scenario. However, it is found that the minimal messenger model does not derive the correct electroweak symmetry breaking. In this Letter we present a model which has the coupling of the messengers with the SO(10) GUT-symmetry breaking Higgs fields. The model is one of the realistic extensions of the gauge mediation model with superconformal hidden sector. It is shown that the extension is applicable for a broad range of conformality breaking scale

Massively parallel simulations of strong electronic correlations: Realistic Coulomb vertex and multiplet effects

Science.gov (United States)

Baumgärtel, M.; Ghanem, K.; Kiani, A.; Koch, E.; Pavarini, E.; Sims, H.; Zhang, G.

2017-07-01

We discuss the efficient implementation of general impurity solvers for dynamical mean-field theory. We show that both Lanczos and quantum Monte Carlo in different flavors (Hirsch-Fye, continuous-time hybridization- and interaction-expansion) exhibit excellent scaling on massively parallel supercomputers. We apply these algorithms to simulate realistic model Hamiltonians including the full Coulomb vertex, crystal-field splitting, and spin-orbit interaction. We discuss how to remove the sign problem in the presence of non-diagonal crystal-field and hybridization matrices. We show how to extract the physically observable quantities from imaginary time data, in particular correlation functions and susceptibilities. Finally, we present benchmarks and applications for representative correlated systems.

Effects of nasal drug delivery device and its orientation on sprayed particle deposition in a realistic human nasal cavity.

Science.gov (United States)

Tong, Xuwen; Dong, Jingliang; Shang, Yidan; Inthavong, Kiao; Tu, Jiyuan

2016-10-01

In this study, the effects of nasal drug delivery device and the spray nozzle orientation on sprayed droplets deposition in a realistic human nasal cavity were numerically studied. Prior to performing the numerical investigation, an in-house designed automated actuation system representing mean adults actuation force was developed to produce realistic spray plume. Then, the spray plume development was filmed by high speed photography system, and spray characteristics such as spray cone angle, break-up length, and average droplet velocity were obtained through off-line image analysis. Continuing studies utilizing those experimental data as boundary conditions were applied in the following numerical spray simulations using a commercially available nasal spray device, which was inserted into a realistic adult nasal passage with external facial features. Through varying the particle releasing direction, the deposition fractions of selected particle sizes on the main nasal passage for targeted drug delivery were compared. The results demonstrated that the middle spray direction showed superior spray efficiency compared with upper or lower directions, and the 10µm agents were the most suitable particle size as the majority of sprayed agents can be delivered to the targeted area, the main passage. This study elaborates a comprehensive approach to better understand nasal spray mechanism and evaluate its performance for existing nasal delivery practices. Results of this study can assist the pharmaceutical industry to improve the current design of nasal drug delivery device and ultimately benefit more patients through optimized medications delivery. Copyright © 2016 Elsevier Ltd. All rights reserved.