WorldWideScience

Sample records for real-time internet therapy

  1. Ambiguity and Concepts in Real Time Online Internet Traffic Classification

    Directory of Open Access Journals (Sweden)

    Hamza Awad Hamza Ibrahim

    2014-03-01

    Full Text Available Internet traffic classification gained significant attention in the last few years. Identifying the Internet applications in the real time is one of the most significant challenges in network traffic classification. Most of the proposed classification methods are limited to offline classification and cannot support online classification. This paper aims to highlight the ambiguity in the definition of online classification. Therefore, some of the previous online classification works are discussed and analyzed. This analysing is to check how far the real time online classification was achieved. The results indicate that most of the previous works consider a real Internet traffic but did not consider a real time online classification. In addition, the paper provides a real time classifier which was proposed and used in [1] [2] [3], to show how to perform a real time online classification.

  2. Real-time Social Internet Data to Guide Forecasting Models

    Energy Technology Data Exchange (ETDEWEB)

    Del Valle, Sara Y. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-09-20

    Our goal is to improve decision support by monitoring and forecasting events using social media, mathematical models, and quantifying model uncertainty. Our approach is real-time, data-driven forecasts with quantified uncertainty: Not just for weather anymore. Information flow from human observations of events through an Internet system and classification algorithms is used to produce quantitatively uncertain forecast. In summary, we want to develop new tools to extract useful information from Internet data streams, develop new approaches to assimilate real-time information into predictive models, validate approaches by forecasting events, and our ultimate goal is to develop an event forecasting system using mathematical approaches and heterogeneous data streams.

  3. Real Time Recognition Of Speakers From Internet Audio Stream

    Directory of Open Access Journals (Sweden)

    Weychan Radoslaw

    2015-09-01

    Full Text Available In this paper we present an automatic speaker recognition technique with the use of the Internet radio lossy (encoded speech signal streams. We show an influence of the audio encoder (e.g., bitrate on the speaker model quality. The model of each speaker was calculated with the use of the Gaussian mixture model (GMM approach. Both the speaker recognition and the further analysis were realized with the use of short utterances to facilitate real time processing. The neighborhoods of the speaker models were analyzed with the use of the ISOMAP algorithm. The experiments were based on four 1-hour public debates with 7–8 speakers (including the moderator, acquired from the Polish radio Internet services. The presented software was developed with the MATLAB environment.

  4. Data Transfer Over the Internet for Real Time Applications

    Institute of Scientific and Technical Information of China (English)

    Cheng-Wei Dai; Shuang-Hua Yang; Roger Knott

    2006-01-01

    Efficient real time data exchange over the Internet plays a crucial role in the successful application of web-based systems. In this paper, a data transfer mechanism over the Internet is proposed for real time web based applications. The mechanism incorporates the eXtensible Markup Language (XML) and Hierarchical Data Format (HDF) to provide a flexible and efficient data format. Heterogeneous transfer data is classified into light and heavy data, which are stored using XML and HDF respectively; the HDF data format is then mapped to Java Document Object Model (JDOM) objects in XML in the Java environment. These JDOM data objects are sent across computer networks with the support of the Java Remote Method Invocation (RMI) data transfer infrastructure. Client's defined data priority levels are implemented in RMI, which guides a server to transfer data objects at different priorities. A remote monitoring system for an industrial reactor process simulator is used as a case study to illustrate the proposed data transfer mechanism.

  5. Viewing ISS Data in Real Time via the Internet

    Science.gov (United States)

    Myers, Gerry; Chamberlain, Jim

    2004-01-01

    EZStream is a computer program that enables authorized users at diverse terrestrial locations to view, in real time, data generated by scientific payloads aboard the International Space Station (ISS). The only computation/communication resource needed for use of EZStream is a computer equipped with standard Web-browser software and a connection to the Internet. EZStream runs in conjunction with the TReK software, described in a prior NASA Tech Briefs article, that coordinates multiple streams of data for the ground communication system of the ISS. EZStream includes server components that interact with TReK within the ISS ground communication system and client components that reside in the users' remote computers. Once an authorized client has logged in, a server component of EZStream pulls the requested data from a TReK application-program interface and sends the data to the client. Future EZStream enhancements will include (1) extensions that enable the server to receive and process arbitrary data streams on its own and (2) a Web-based graphical-user-interface-building subprogram that enables a client who lacks programming expertise to create customized display Web pages.

  6. Novel Advancements in Internet-Based Real Time Data Technologies

    Science.gov (United States)

    Myers, Gerry; Welch, Clara L. (Technical Monitor)

    2002-01-01

    AZ Technology has been working with MSFC Ground Systems Department to find ways to make it easier for remote experimenters (RPI's) to monitor their International Space Station (ISS) payloads in real-time from anywhere using standard/familiar devices. AZ Technology was awarded an SBIR Phase I grant to research the technologies behind and advancements of distributing live ISS data across the Internet. That research resulted in a product called "EZStream" which is in use on several ISS-related projects. Although the initial implementation is geared toward ISS, the architecture and lessons learned are applicable to other space-related programs. This paper presents the high-level architecture and components that make up EZStream. A combination of commercial-off-the-shelf (COTS) and custom components were used and their interaction will be discussed. The server is powered by Apache's Jakarta-Tomcat web server/servlet engine. User accounts are maintained in a My SQL database. Both Tomcat and MySQL are Open Source products. When used for ISS, EZStream pulls the live data directly from NASA's Telescience Resource Kit (TReK) API. TReK parses the ISS data stream into individual measurement parameters and performs on-the- fly engineering unit conversion and range checking before passing the data to EZStream for distribution. TReK is provided by NASA at no charge to ISS experimenters. By using a combination of well established Open Source, NASA-supplied. and AZ Technology-developed components, operations using EZStream are robust and economical. Security over the Internet is a major concern on most space programs. This paper describes how EZStream provides for secure connection to and transmission of space- related data over the public Internet. Display pages that show sensitive data can be placed under access control by EZStream. Users are required to login before being allowed to pull up those web pages. To enhance security, the EZStream client/server data transmissions can

  7. Real Time Medical Image Consultation System Through Internet

    Directory of Open Access Journals (Sweden)

    D. Durga Prasad

    2010-01-01

    Full Text Available Teleconsultation among doctors using a telemedicine system typically involves dealing with and sharing medical images of the patients. This paper describes a software tool written in Java which enables the participating doctors to view medical images such as blood slides, X-Ray, USG, ECG etc. online and even allows them to mark and/or zoom specific areas. It is a multi-party secure image communication system tool that can be used by doctors and medical consultants over the Internet.

  8. Real-Time Applications in Smart Grids Using Internet Communications: : Latency Issues and Mitigations

    OpenAIRE

    Borlaug, Ole-Henrik

    2014-01-01

    The Smart Grid will be a geographically widespread system, with real-time applications spanning large distances. To deploy real-time applications traditionally Industrial networks designed to specification are used. Since the Smart Grid will be geographically widespread and consist of many devices there is a great economic gain by utilizing the Internet as its communication network.This thesis presents literature describing problems with congestion, bufferbloat and active queue management in ...

  9. Real-time dosimetry in external beam radiation therapy

    Institute of Scientific and Technical Information of China (English)

    Ramachandran; Prabhakar

    2013-01-01

    With growing complexity in radiotherapy treatment delivery,it has become mandatory to check each and every treatment plan before implementing clinically.This process is currently administered by an independent secondary check of all treatment parameters and as a pre-treatment quality assurance (QA) check for intensity modulated radiation therapy (IMRT) and volumetric modulated arc therapy treatment plans.Although pre-treatment IMRT QA is aimed to ensure the correct dose is delivered to the patient,it does not necessarily predict the clinically relevant patient dose errors.During radiotherapy,treatment uncertainties can affect tumor control and may increase complications to surrounding normal tissues.To combat this,image guided radiotherapy is employed to help ensure the plan conditions are mimicked on the treatment machine.However,it does not provide information on actual delivered dose to the tumor volume.Knowledge of actual dose delivered during treatment aid in confirming the prescribed dose and also to replan/reassess the treatment in situations where the planned dose is not delivered as expected by the treating physician.Major accidents in radiotherapy would have been averted if real time dosimetry is incorporated as part of the routine radiotherapy procedure.Of late real-time dosimetry is becoming popular with complex treatments in radiotherapy.Realtime dosimetry can be either in the form of point doses or planar doses or projected on to a 3D image dataset to obtain volumetric dose.They either provide entrance dose or exit dose or dose inside the natural cavities of a patient.In external beam radiotherapy,there are four different established platforms whereby the delivered dose information can be obtained:(1)Collimator;(2)Patient;(3)Couch;and(4)Electronic Portal Imaging Device.Current real-time dosimetric techniques available in radiotherapy have their own advantages and disadvantages and a combination of one or more of these methods provide vital information

  10. Real-Time Shop-Floor Production Performance Analysis Method for the Internet of Manufacturing Things

    Directory of Open Access Journals (Sweden)

    Yingfeng Zhang

    2014-04-01

    Full Text Available Typical challenges that manufacturing enterprises are facing now are compounded by lack of timely, accurate, and consistent information of manufacturing resources. As a result, it is difficult to analyze the real-time production performance for the shop-floor. In this paper, the definition and overall architecture of the internet of manufacturing things is presented to provide a new paradigm by extending the techniques of internet of things (IoT to manufacturing field. Under this architecture, the real-time primitive events which occurred at different manufacturing things such as operators, machines, pallets, key materials, and so forth can be easily sensed. Based on these distributed primitive events, a critical event model is established to automatically analyze the real-time production performance. Here, the up-level production performance analysis is regarded as a series of critical events, and the real-time value of each critical event can be easily calculated according to the logical and sequence relationships among these multilevel events. Finally, a case study is used to illustrate how to apply the designed methods to analyze the real-time production performance.

  11. On Securing Real-Time Speech Transmission over the Internet: An Experimental Study

    Directory of Open Access Journals (Sweden)

    Alessandro Aldini

    2003-09-01

    Full Text Available We analyze and compare several soft real-time applications designed for the secure transmission of packetized audio over the Internet. The main metrics we consider for the purposes of our analysis are (i the computational load due to the coding/decoding phases, and (ii the computational overhead of the encryption/decryption activities, carried out by the audio tools of interest. The main result we present is that an appropriate degree of security may be guaranteed to real-time audio communications at a negligible computational cost if the adopted security strategies are integrated together with the playout control mechanism incorporated in the audio tools.

  12. Efficient Frame Schedule Scheme for Real-time Video Transmission Across the Internet Using TCP

    Directory of Open Access Journals (Sweden)

    Yonghua Xiong

    2009-05-01

    Full Text Available The great end-to-end delays are the major factor to influence the visual quality of real-time video across the Internet using TCP as transport layer protocol. In this paper, we present a video frame schedule scheme for rate adaptive real-time video transmission over TCP. The scheme schedules video frames between the application layer sender-buffer, the TCP sender-buffer and TCP receiver-buffer and can regulate automaticlly the video frame rate and play out buffer delays according to the network congestion level. The sheme requires only an extra buffer of application layer and can significantly cut down the end-to-end delays of real-time video without any modification to the network infrastructure or TCP protocol stack. The performance of the proposed solution is evaluated through extensive simulations using the NS-2 simulator.

  13. NTRIP: Networked Transport of RTCM via Internet Protocol - Internet Radio Technology for Real-Time GNSS Purposes

    Science.gov (United States)

    Gebhard, H.; Weber, G.

    2003-12-01

    The massive worldwide growing of Internet capacity enables the introduction of new services such as Internet Radio or Internet Video-on-Demand, which transfer continuous data-streams by IP-packages. These services include the data transport via mobile IP-Networks like GSM, GPRS, EDGE, and UMTS where costs are nowadays rapidly decreasing. As a consequence, the global Internet can be used for the real-time collection and exchange of GNSS data, as well as for broadcasting derived differential products. Compared to Multimedia applications, the bandwidth required for streaming GNSS data is relatively small. The introduction of a real time streaming of GNSS data via Internet as a professional service is demanding with respect to network transparency, network security, program stability, access control, remote administration, scalability and client simplicity. This paper will discuss several possible technical/protocol solutions for streaming GNSS date over the Internet: Unicast vs. IP-Multicast, TCP vs. UDP, Client/Server vs. Client/Server/Splitter architecture. Based on this discussion, a novel HTTP-based technique for streaming GNSS data to mobile clients over the Internet is introduced. It allows simultaneous access of a large number of PDAs, Laptops, or GNSS receivers to a broadcasting host via Mobile IP-Networks. The technique establishes a format called "Networked Transport of RTCM via Internet Protocol" (NTRIP). NTRIP is designed for disseminating differential correction data (e.g. in the RTCM-104 format) or other kinds of GNSS streaming data.

  14. Real-time mobile robot teleoperation via Internet based on predictive control

    Institute of Scientific and Technical Information of China (English)

    Shihua WANG; Bugong XU; YunHui LIU; Yeming ZHOU

    2008-01-01

    A remote control system that can control a mobile robot in real time via the internet is proposed. To compensate for the network delay and counteract its impact on the teleoperation system, a predictive control scheme based on the modified Smith predictor proposed is selected. To ensure the stability and transparency of the system, a dynamic model manager is designed based on the information exchange between the sensors at the mas-ter and slave sides. To precisely predict the time delay, a new timer synchronization algorithm is proposed. To decrease delay- jitter, a new data buffer scheme is per-formed. Force feedback and a virtual predictive display are introduced to enhance the real-time efficiency of tele-operation. The usefulness and effectiveness of the pro-posed method and system are proven by teleoperation experiments via the internet over a long distance.

  15. Real-Time Talking Avatar on the Internet Using Kinect and Voice Conversion

    Directory of Open Access Journals (Sweden)

    Takashi Nose

    2015-12-01

    Full Text Available We have more chances to communicate via the in-ternet. We often use text/video chat, but there are some problems, such as a lack of communication and anonymity. In this paper, we propose and implement a real-time talking avatar, where we can communicate with each other by synchronizing character’s voice and motion from ours while keeping anonymity by using a voice conversion technique. For the voice conversion, we improve accuracy of the voice conversion by specializing to the target character’s voice. Finally, we conduct subjective experiments and show the possibility of a new style of communication on the internet.

  16. Real-Time Mapping: Contemporary Challenges and the Internet of Things as the Way Forward

    Directory of Open Access Journals (Sweden)

    Bęcek Kazimierz

    2016-12-01

    Full Text Available The Internet of Things (IoT is an emerging technology that was conceived in 1999. The key components of the IoT are intelligent sensors, which represent objects of interest. The adjective ‘intelligent’ is used here in the information gathering sense, not the psychological sense. Some 30 billion sensors that ‘know’ the current status of objects they represent are already connected to the Internet. Various studies indicate that the number of installed sensors will reach 212 billion by 2020. Various scenarios of IoT projects show sensors being able to exchange data with the network as well as between themselves. In this contribution, we discuss the possibility of deploying the IoT in cartography for real-time mapping. A real-time map is prepared using data harvested through querying sensors representing geographical objects, and the concept of a virtual sensor for abstract objects, such as a land parcel, is presented. A virtual sensor may exist as a data record in the cloud. Sensors are identified by an Internet Protocol address (IP address, which implies that geographical objects through their sensors would also have an IP address. This contribution is an updated version of a conference paper presented by the author during the International Federation of Surveyors 2014 Congress in Kuala Lumpur. The author hopes that the use of the IoT for real-time mapping will be considered by the mapmaking community.

  17. Real-Time Mapping: Contemporary Challenges and the Internet of Things as the Way Forward

    Science.gov (United States)

    Bęcek, Kazimierz

    2016-12-01

    The Internet of Things (IoT) is an emerging technology that was conceived in 1999. The key components of the IoT are intelligent sensors, which represent objects of interest. The adjective `intelligent' is used here in the information gathering sense, not the psychological sense. Some 30 billion sensors that `know' the current status of objects they represent are already connected to the Internet. Various studies indicate that the number of installed sensors will reach 212 billion by 2020. Various scenarios of IoT projects show sensors being able to exchange data with the network as well as between themselves. In this contribution, we discuss the possibility of deploying the IoT in cartography for real-time mapping. A real-time map is prepared using data harvested through querying sensors representing geographical objects, and the concept of a virtual sensor for abstract objects, such as a land parcel, is presented. A virtual sensor may exist as a data record in the cloud. Sensors are identified by an Internet Protocol address (IP address), which implies that geographical objects through their sensors would also have an IP address. This contribution is an updated version of a conference paper presented by the author during the International Federation of Surveyors 2014 Congress in Kuala Lumpur. The author hopes that the use of the IoT for real-time mapping will be considered by the mapmaking community.

  18. Lessons Learned from Real-Time, Event-Based Internet Science Communications

    Science.gov (United States)

    Phillips, T.; Myszka, E.; Gallagher, D. L.; Adams, M. L.; Koczor, R. J.; Whitaker, Ann F. (Technical Monitor)

    2001-01-01

    For the last several years the Science Directorate at Marshall Space Flight Center has carried out a diverse program of Internet-based science communication. The Directorate's Science Roundtable includes active researchers, NASA public relations, educators, and administrators. The Science@NASA award-winning family of Web sites features science, mathematics, and space news. The program includes extended stories about NASA science, a curriculum resource for teachers tied to national education standards, on-line activities for students, and webcasts of real-time events. The focus of sharing science activities in real-time has been to involve and excite students and the public about science. Events have involved meteor showers, solar eclipses, natural very low frequency radio emissions, and amateur balloon flights. In some cases, broadcasts accommodate active feedback and questions from Internet participants. Through these projects a pattern has emerged in the level of interest or popularity with the public. The pattern differentiates projects that include science from those that do not, All real-time, event-based Internet activities have captured public interest at a level not achieved through science stories or educator resource material exclusively. The worst event-based activity attracted more interest than the best written science story. One truly rewarding lesson learned through these projects is that the public recognizes the importance and excitement of being part of scientific discovery. Flying a camera to 100,000 feet altitude isn't as interesting to the public as searching for viable life-forms at these oxygen-poor altitudes. The details of these real-time, event-based projects and lessons learned will be discussed.

  19. Internet Data Distribution – extending real-time data sharing throughout the Americas

    Directory of Open Access Journals (Sweden)

    T. Yoksas

    2006-01-01

    Full Text Available The Unidata Program Center (Unidata of the University Corporation of Atmospheric Research (UCAR is involved in three international collaborations whose goals are extension of real-time data delivery-to and sharing-of locally held datasets-by educational institutions throughout the Americas. These efforts are based on the use of Unidata's Internet Data Distribution (IDD system which is built on top of its proven Local Data Manager Version 6 (LDM-6 technology. The Unidata IDD is an event-driven network of cooperating Unidata LDM servers that distributes discipline-neutral data products in near real-time over wide-area networks. The IDD, a collaboration of over 150 mostly North American institutions of higher education, has been the primary source of real-time atmospheric science data for the US university community for over a decade,. In addition to providing a highly reliable mechanism for delivering real-time data, the IDD allows users to easily share locally held datasets.

  20. Internet, the press and Brazilian elections: agenda-setting on real time

    Directory of Open Access Journals (Sweden)

    Alessandra ALDÉ

    2006-12-01

    Full Text Available This research paper broaches the relations between the electoral campaigns of the main presidential candidates to the 2002 Brazilian elections and the Internet, by analyzing the coverage of political agenda originated by the campaign official websites on the digital and paper versions of the national daily newspapers Jornal do Brasil and O Globo. This particular campaign was the first Brazilian electoral occasion in which Internet played a significant role as an efficient media; our analysis reveals a good example of the strategic use of the web to provoke real-time news, which ended up amplified by printed media, strengthening attacks which would otherwise not gain such a space or repercussion.

  1. Embedded Web Technology: Internet Technology Applied to Real-Time System Control

    Science.gov (United States)

    Daniele, Carl J.

    1998-01-01

    The NASA Lewis Research Center is developing software tools to bridge the gap between the traditionally non-real-time Internet technology and the real-time, embedded-controls environment for space applications. Internet technology has been expanding at a phenomenal rate. The simple World Wide Web browsers (such as earlier versions of Netscape, Mosaic, and Internet Explorer) that resided on personal computers just a few years ago only enabled users to log into and view a remote computer site. With current browsers, users not only view but also interact with remote sites. In addition, the technology now supports numerous computer platforms (PC's, MAC's, and Unix platforms), thereby providing platform independence.In contrast, the development of software to interact with a microprocessor (embedded controller) that is used to monitor and control a space experiment has generally been a unique development effort. For each experiment, a specific graphical user interface (GUI) has been developed. This procedure works well for a single-user environment. However, the interface for the International Space Station (ISS) Fluids and Combustion Facility will have to enable scientists throughout the world and astronauts onboard the ISS, using different computer platforms, to interact with their experiments in the Fluids and Combustion Facility. Developing a specific GUI for all these users would be cost prohibitive. An innovative solution to this requirement, developed at Lewis, is to use Internet technology, where the general problem of platform independence has already been partially solved, and to leverage this expanding technology as new products are developed. This approach led to the development of the Embedded Web Technology (EWT) program at Lewis, which has the potential to significantly reduce software development costs for both flight and ground software.

  2. First Brazilian Real Time Network DGPS through the Internet: Development, Application and Availability Analyses

    Science.gov (United States)

    Alves, D.; Dalbelo, L.; Monico, J.; Shimabukuro, M.

    2012-01-01

    The Global Positioning System (GPS) is widely used by the civil community. Differential GPS (DGPS) was developed to provide better accuracy than autonomous GPS. The DGPS concept is based on the high correlation of errors due to atmospheric effects, satellite clocks and orbits. However, as the baseline grows, its efficiency decreases because the error correlation is reduced. This limitation can be handled by using a reference station network and applying the network DGPS concept (called NDGPS). In this paper, the goal is to present aspects related to the development and application of NDGPS in real time at the São Paulo state network in Brazil. The NDGPS corrections were computed from data received via the Internet using NTRIP (Networked Transport of RTCM via Internet Protocol). Our implementation was based on BNC (BKG Ntrip Client) software. NDGPS provided RMS improvements of up to 59% in horizontal components and 31% in vertical components when compared to DGPS. The availability of the system, the first of this nature in Brazil, was also analyzed within the context of the SP State GNSS Network, located in the southeastern region of Brazil. The results also serve as an indication of the quality of local internet infrastructure for using in geodetic positioning.

  3. Creating the Public Connection: Real-Time Internet Resources for Museums and Planetaria

    Science.gov (United States)

    Wyatt, Ryan J.

    1995-05-01

    The ``Public Connection'' project, funded by NASA's Digital Library Technology Program, creates a link through which near-real-time data and imagery can flow via Rice University to the Houston Museum of Natural Science. The Museum's 2.4 million visitors per year will have access to current research in the form of planetarium programs, computer-based interactive kiosks, and space and earth science problem-solving simulations. The ``Earth Forum'' and ``Challenger Center'' problem-solving simulations, which attract school classes as well as individual visitors, will also include real-time data in the near future. This presentation introduces the first interactive display module (completed in the fall of 1994), on Comet Shoemaker--Levy 9, as well as the ``Earth Today'' exhibit, ``Space Update'' and ``Space Weather'' software, and other planetarium-oriented programs. We discuss the planetarium feature ``Connected!,'' which premiered in January 1995 and highlights recent results in space science available over the Internet. Also, the Museum's Burke Baker Planetarium has already co-hosted part of Rice University's Continuing Education program for ``Surfing the Solar System'' in addition to other Internet-oriented educational events. Finally, we address plans for future software that will enable planetaria to incorporate research results into live and pre-recorded programming. A World Wide Web page (http://space.rice.edu/hmns/connect.html) describes the project in more detail and allows users to download software for educational use. Suggestions for material (archival or realtime) to be included in any of these exhibits is appreciatively solicited.

  4. An Internet-Based Real-Time Audiovisual Link for Dual MEG Recordings.

    Directory of Open Access Journals (Sweden)

    Andrey Zhdanov

    Full Text Available Most neuroimaging studies of human social cognition have focused on brain activity of single subjects. More recently, "two-person neuroimaging" has been introduced, with simultaneous recordings of brain signals from two subjects involved in social interaction. These simultaneous "hyperscanning" recordings have already been carried out with a spectrum of neuroimaging modalities, such as functional magnetic resonance imaging (fMRI, electroencephalography (EEG, and functional near-infrared spectroscopy (fNIRS.We have recently developed a setup for simultaneous magnetoencephalographic (MEG recordings of two subjects that communicate in real time over an audio link between two geographically separated MEG laboratories. Here we present an extended version of the setup, where we have added a video connection and replaced the telephone-landline-based link with an Internet connection. Our setup enabled transmission of video and audio streams between the sites with a one-way communication latency of about 130 ms. Our software that allows reproducing the setup is publicly available.We demonstrate that the audiovisual Internet-based link can mediate real-time interaction between two subjects who try to mirror each others' hand movements that they can see via the video link. All the nine pairs were able to synchronize their behavior. In addition to the video, we captured the subjects' movements with accelerometers attached to their index fingers; we determined from these signals that the average synchronization accuracy was 215 ms. In one subject pair we demonstrate inter-subject coherence patterns of the MEG signals that peak over the sensorimotor areas contralateral to the hand used in the task.

  5. Novel Advancements in Internet-Based Real-Time Data Technologies

    Science.gov (United States)

    Myers, Gerry; Welch, Clara L. (Technical Monitor)

    2002-01-01

    AZ Technology has been working with NASA MSFC (Marshall Space Flight Center) to find ways to make it easier for remote experimenters (RPI's) to monitor their International Space Station (ISS) payloads in real-time from anywhere using standard/familiar devices. That effort resulted in a product called 'EZStream' which is in use on several ISS-related projects. Although the initial implementation is geared toward ISS, the architecture and lessons learned are applicable to other space-related programs. This paper begins with a brief history on why Internet-based real-time data is important and where EZStream or products like it fit in the flow of data from orbit to experimenter/researcher. A high-level architecture is then presented along with explanations of the components used. A combination of commercial-off-the-shelf (COTS), Open Source, and custom components are discussed. The use of standard protocols is shown along with some details on how data flows between server and client. Some examples are presented to illustrate how a system like EZStream can be used in real world applications and how care was taken to make the end-user experience as painless as possible. A system such as EZStream has potential in the commercial (non-ISS) arena and some possibilities are presented. During the development and fielding of EZStream, a lot was learned. Good and not so good decisions were made. Some of the major lessons learned will be shared. The development of EZStream is continuing and the future of EZStream will be discussed to shed some light over the technological horizon.

  6. A Fast Density-Based Clustering Algorithm for Real-Time Internet of Things Stream

    Directory of Open Access Journals (Sweden)

    Amineh Amini

    2014-01-01

    Full Text Available Data streams are continuously generated over time from Internet of Things (IoT devices. The faster all of this data is analyzed, its hidden trends and patterns discovered, and new strategies created, the faster action can be taken, creating greater value for organizations. Density-based method is a prominent class in clustering data streams. It has the ability to detect arbitrary shape clusters, to handle outlier, and it does not need the number of clusters in advance. Therefore, density-based clustering algorithm is a proper choice for clustering IoT streams. Recently, several density-based algorithms have been proposed for clustering data streams. However, density-based clustering in limited time is still a challenging issue. In this paper, we propose a density-based clustering algorithm for IoT streams. The method has fast processing time to be applicable in real-time application of IoT devices. Experimental results show that the proposed approach obtains high quality results with low computation time on real and synthetic datasets.

  7. A fast density-based clustering algorithm for real-time Internet of Things stream.

    Science.gov (United States)

    Amini, Amineh; Saboohi, Hadi; Wah, Teh Ying; Herawan, Tutut

    2014-01-01

    Data streams are continuously generated over time from Internet of Things (IoT) devices. The faster all of this data is analyzed, its hidden trends and patterns discovered, and new strategies created, the faster action can be taken, creating greater value for organizations. Density-based method is a prominent class in clustering data streams. It has the ability to detect arbitrary shape clusters, to handle outlier, and it does not need the number of clusters in advance. Therefore, density-based clustering algorithm is a proper choice for clustering IoT streams. Recently, several density-based algorithms have been proposed for clustering data streams. However, density-based clustering in limited time is still a challenging issue. In this paper, we propose a density-based clustering algorithm for IoT streams. The method has fast processing time to be applicable in real-time application of IoT devices. Experimental results show that the proposed approach obtains high quality results with low computation time on real and synthetic datasets.

  8. Real-time reporting and internet-accessible cellular based coastal sea level gauge

    Digital Repository Service at National Institute of Oceanography (India)

    Desai, R.G.P.; Joseph, A.; Agarvadekar, Y.; Mehra, P.; Dabholkar, N.; Parab, A.; Gouveia, A.D.; Tengali, S.

    in communication infrastructure will further improve our capability in coastal sea-level data collection in real time and its utilization for running predictive models as well as warning and alert purposes. The architecture of the system described herein...

  9. Real-time reporting and internet-accessible coastal sea-level gauge

    Digital Repository Service at National Institute of Oceanography (India)

    Desai, R.G.P.; Joseph, A.; Agarvadekar, Y.; Mehra, P.; Dabholkar, N.; Parab, A.; Gouveia, A.D.; Tengali, S.

    infrastructure will further improve our capability in coastal sea- level data collection in real time and its utilisation for running predictive models as well as warning and alert purposes. The architecture of the system described herein, and operational since...

  10. Design of real-time voice over internet protocol system under bandwidth network

    Science.gov (United States)

    Zhang, Li; Gong, Lina

    2017-04-01

    With the increasing bandwidth of the network and network convergence accelerating, VoIP means of communication across the network is becoming increasingly popular phenomenon. The real-time identification and analysis for VOIP flow over backbone network become the urgent needs and research hotspot of network operations management. Based on this, the paper proposes a VoIP business management system over backbone network. The system first filters VoIP data stream over backbone network and further resolves the call signaling information and media voice. The system can also be able to design appropriate rules to complete real-time reduction and presentation of specific categories of calls. Experimental results show that the system can parse and process real-time backbone of the VoIP call, and the results are presented accurately in the management interface, VoIP-based network traffic management and maintenance provide the necessary technical support.

  11. Orchestrating utility supply and demand in real-time via the Internet, home networks, and smart appliances

    Energy Technology Data Exchange (ETDEWEB)

    Cruickshank, R.F. III [Power Networks, Big Indian, NY (United States)

    2008-07-01

    This paper presented a model to illustrate the efficient coordination between the supply-side and demand-side of household electricity use and the magnitude of demand that can be managed using real-time pricing. In real-time supply and demand side management, a variable price for service is sent via Internet from the supply-side to the demand-side. The 3 benefits to this type of demand-side management are that traditional fossil-fuelled electrical capacity can operate less of the time and more efficiently; renewable electrical capacity such as wind and solar power can be put to use more efficiently when it becomes available; and additional means are available to protect the transmission and distribution infrastructure of the utility. A critical requirement is that pricing should change frequently throughout the day so that budget conscious consumers do not have to wait too long for favourable pricing to use their appliances. 12 refs., 9 figs.

  12. Cherenkov Video Imaging Allows for the First Visualization of Radiation Therapy in Real Time

    Energy Technology Data Exchange (ETDEWEB)

    Jarvis, Lesley A., E-mail: Lesley.a.jarvis@hitchcock.org [Department of Medicine, Geisel School of Medicine at Dartmouth College, Hanover, New Hampshire (United States); Norris Cotton Cancer Center at the Dartmouth-Hitchcock Medical Center, Lebanon, New Hampshire (United States); Zhang, Rongxiao [Department of Physics and Astronomy, Dartmouth College, Hanover, New Hampshire (United States); Gladstone, David J. [Department of Medicine, Geisel School of Medicine at Dartmouth College, Hanover, New Hampshire (United States); Norris Cotton Cancer Center at the Dartmouth-Hitchcock Medical Center, Lebanon, New Hampshire (United States); Jiang, Shudong [Thayer School of Engineering, Dartmouth College, Hanover, New Hampshire (United States); Hitchcock, Whitney [Geisel School of Medicine at Dartmouth College, Hanover, New Hampshire (United States); Friedman, Oscar D.; Glaser, Adam K.; Jermyn, Michael [Thayer School of Engineering, Dartmouth College, Hanover, New Hampshire (United States); Pogue, Brian W. [Department of Physics and Astronomy, Dartmouth College, Hanover, New Hampshire (United States); Thayer School of Engineering, Dartmouth College, Hanover, New Hampshire (United States)

    2014-07-01

    Purpose: To determine whether Cherenkov light imaging can visualize radiation therapy in real time during breast radiation therapy. Methods and Materials: An intensified charge-coupled device (CCD) camera was synchronized to the 3.25-μs radiation pulses of the clinical linear accelerator with the intensifier set × 100. Cherenkov images were acquired continuously (2.8 frames/s) during fractionated whole breast irradiation with each frame an accumulation of 100 radiation pulses (approximately 5 monitor units). Results: The first patient images ever created are used to illustrate that Cherenkov emission can be visualized as a video during conditions typical for breast radiation therapy, even with complex treatment plans, mixed energies, and modulated treatment fields. Images were generated correlating to the superficial dose received by the patient and potentially the location of the resulting skin reactions. Major blood vessels are visible in the image, providing the potential to use these as biological landmarks for improved geometric accuracy. The potential for this system to detect radiation therapy misadministrations, which can result from hardware malfunction or patient positioning setup errors during individual fractions, is shown. Conclusions: Cherenkoscopy is a unique method for visualizing surface dose resulting in real-time quality control. We propose that this system could detect radiation therapy errors in everyday clinical practice at a time when these errors can be corrected to result in improved safety and quality of radiation therapy.

  13. Broadcasting Engineering Laboratories--Audio/Video and Data--in Real-Time over the Internet

    Science.gov (United States)

    Jain, Prashant K.; Gu, Yuxiang; Rizwan-uddin

    2008-01-01

    Internet extends the reach of existing laboratory and training infrastructure to beyond the walls of such facilities. Though nothing can replace the hands-on experience in a laboratory; a carefully developed web-based digital lab may be the next best thing. In some cases, there may be benefits associated with a "distance laboratory" that…

  14. The CHORDS Portal: Lowering the Barrier for Internet Collection, Archival and Distribution of Real-Time Geophysical Observations

    Science.gov (United States)

    Martin, C.; Dye, M. J.; Daniels, M. D.; Keiser, K.; Maskey, M.; Graves, S. J.; Kerkez, B.; Chandrasekar, V.; Vernon, F.

    2015-12-01

    The Cloud-Hosted Real-time Data Services for the Geosciences (CHORDS) project tackles the challenges of collecting and disseminating geophysical observational data in real-time, especially for researchers with limited IT budgets and expertise. The CHORDS Portal is a component that allows research teams to easily configure and operate a cloud-based service which can receive data from dispersed instruments, manage a rolling archive of the observations, and serve these data to any client on the Internet. The research group (user) creates a CHORDS portal simply by running a prepackaged "CHORDS appliance" on Amazon Web Services. The user has complete ownership and management of the portal. Computing expenses are typically very small. RESTful protocols are employed for delivering and fetching data from the portal, which means that any system capable of sending an HTTP GET message is capable of accessing the portal. A simple API is defined, making it straightforward for non-experts to integrate a diverse collection of field instruments. Languages with network access libraries, such as Python, sh, Matlab, R, IDL, Ruby and JavaScript (and most others) can retrieve structured data from the portal with just a few lines of code. The user's private portal provides a browser-based system for configuring, managing and monitoring the health of the integrated real-time system. This talk will highlight the design goals, architecture and agile development of the CHORDS Portal. A running portal, with operational data feeds from across the country, will be presented.

  15. Development of a GIS-based, real-time Internet mapping tool for rabies surveillance

    Directory of Open Access Journals (Sweden)

    Manangan Jamie

    2006-11-01

    Full Text Available Abstract Background Oral rabies vaccination programs have been implemented to control the spread of wildlife rabies in the United States. However, current surveillance systems are inadequate for the efficient management and evaluation of these large scale vaccine baiting programs. With this in mind, a GIS-based rabies surveillance database and Internet mapping application was created. This surveillance system, RabID, provides a new resource for the rapid mapping and dissemination of data on animal rabies cases in relation to unaffected, enzootic, and baited areas where current interventions are underway. Results RabID is a centralized database for diagnostic and demographic information collected by local, state, and federal agencies involved in rabies surveillance. The geo-referenced database remits data to an Internet-accessible mapping application that displays rabies surveillance data in relation to environmental and geographic features. Conclusion RabID provides a pioneering example of the power of geographically based Internet-accessible, infectious disease surveillance. This surveillance system was developed from existing technology and is readily adaptable to other infectious diseases and may be particularly useful for zoonoses. The development and application of public health informatics technology may enhance the effectiveness of public health interventions and allow better evaluation of public health interventions.

  16. Online monitoring for proton therapy: A real-time procedure using a planar PET system

    Energy Technology Data Exchange (ETDEWEB)

    Kraan, A.C. [Department of Physics, University of Pisa and INFN, Pisa (Italy); Battistoni, G. [INFN Sezione di Milano, Milano (Italy); Belcari, N.; Camarlinghi, N. [Department of Physics, University of Pisa and INFN, Pisa (Italy); Ciocca, M. [Fondazione CNAO, Pavia (Italy); Ferrari, A. [CERN, Geneva (Switzerland); Ferretti, S. [Department of Physics, University of Pisa and INFN, Pisa (Italy); Mairani, A.; Molinelli, S.; Pullia, M. [Fondazione CNAO, Pavia (Italy); Sala, P. [INFN Sezione di Milano, Milano (Italy); Sportelli, G.; Del Guerra, A. [Department of Physics, University of Pisa and INFN, Pisa (Italy); Rosso, V., E-mail: valeria.rosso@pi.infn.it [Department of Physics, University of Pisa and INFN, Pisa (Italy)

    2015-06-21

    In this study a procedure for range verification in proton therapy by means of a planar in-beam PET system is presented. The procedure consists of two steps: the measurement of the β{sup +}-activity induced in the irradiated body by the proton beam and the comparison of these distributions with simulations. The experimental data taking was performed at the CNAO center in Pavia, Italy, irradiating plastic phantoms. For two different cases we demonstrate how a real-time feedback of the delivered treatment plan can be obtained with in-beam PET imaging.

  17. Online monitoring for proton therapy: A real-time procedure using a planar PET system

    Science.gov (United States)

    Kraan, A. C.; Battistoni, G.; Belcari, N.; Camarlinghi, N.; Ciocca, M.; Ferrari, A.; Ferretti, S.; Mairani, A.; Molinelli, S.; Pullia, M.; Sala, P.; Sportelli, G.; Del Guerra, A.; Rosso, V.

    2015-06-01

    In this study a procedure for range verification in proton therapy by means of a planar in-beam PET system is presented. The procedure consists of two steps: the measurement of the β+-activity induced in the irradiated body by the proton beam and the comparison of these distributions with simulations. The experimental data taking was performed at the CNAO center in Pavia, Italy, irradiating plastic phantoms. For two different cases we demonstrate how a real-time feedback of the delivered treatment plan can be obtained with in-beam PET imaging.

  18. Online monitoring for proton therapy: A real-time procedure using a planar PET system

    CERN Document Server

    Kraan, A C; Belcari, N; Camarlinghi, N; Ciocca, M; Ferrari, A; Ferretti, S; Mairani, A; Molinelli, S; Pullia, M; Sala, P; Sportelli, G; Del Guerra, A; Rosso, V

    2015-01-01

    In this study a procedure for range verification in proton therapy by means of a planar in-beam PET system is presented. The procedure consists of two steps: the measurement of the β+-activity induced in the irradiated body by the proton beam and the comparison of these distributions with simulations. The experimental data taking was performed at the CNAO center in Pavia, Italy, irradiating plastic phantoms. For two different cases we demonstrate how a real-time feedback of the delivered treatment plan can be obtained with in-beam PET imaging.

  19. An Optimal Flow Control Algorithm for Real-time Traffic over the Internet

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    According to the Wide Area Network model and queue dynamics in the router, the authors formulate the Internet flow control as a constrained convex programming problem, where the objective is to maximize the total utility and minimize transmission delay and delay jitter of all sources over their transmission rates. Based on this formulation, flow control can be solved by means of a gradient projection algorithm with properly rate iterations. The main difficulty facing the realization of the iteration algorithm is the distributed computation of the congestion measure. Fortunately, Explicit Congestion Notification (ECN) is likely to be used to improving the performance of TCP in the near future. By using ECN, it is possible to realize the iteration algorithm in IP networks. The algorithm is divided into two parts, algorithms in the router and the source. The main advantage of the scheme is its fast convergence ability and robustness, but small queue length fluctuation is unavoidable when the number of users increases.

  20. Role-Playing and Real-Time Strategy Games Associated with Greater Probability of Internet Gaming Disorder.

    Science.gov (United States)

    Eichenbaum, Adam; Kattner, Florian; Bradford, Daniel; Gentile, Douglas A; Green, C Shawn

    2015-08-01

    Research indicates that a small subset of those who routinely play video games show signs of pathological habits, with side effects ranging from mild (e.g., being late) to quite severe (e.g., losing a job). However, it is still not clear whether individual types, or genres, of games are most strongly associated with Internet gaming disorder (IGD). A sample of 4,744 University of Wisconsin-Madison undergraduates (Mage=18.9 years; SD=1.9 years; 60.5% female) completed questionnaires on general video game playing habits and on symptoms of IGD. Consistent with previous reports: 5.9-10.8% (depending on classification criteria) of individuals who played video games show signs of pathological play. Furthermore, real-time strategy and role-playing video games were more strongly associated with pathological play, compared with action and other games (e.g., phone games). The current investigation adds support to the idea that not all video games are equal. Instead, certain genres of video games, specifically real-time strategy and role-playing/fantasy games, are disproportionately associated with IGD symptoms.

  1. [Research and implementation of a real-time monitoring system for running status of medical monitors based on the internet of things].

    Science.gov (United States)

    Li, Yiming; Qian, Mingli; Li, Long; Li, Bin

    2014-07-01

    This paper proposed a real-time monitoring system for running status of medical monitors based on the internet of things. In the aspect of hardware, a solution of ZigBee networks plus 470 MHz networks is proposed. In the aspect of software, graphical display of monitoring interface and real-time equipment failure alarm is implemented. The system has the function of remote equipment failure detection and wireless localization, which provides a practical and effective method for medical equipment management.

  2. What makes internet therapy work?

    NARCIS (Netherlands)

    Andersson, G.; Carlbring, P.; Berger, T.; Almlov, J.; Cuijpers, P.

    2009-01-01

    Abstract Internet therapy is a novel treatment approach that is used to deliver cognitive behaviour therapy. Treatment components are mainly delivered in the form of texts presented via webpages, and support is provided via e-mail. A growing number of controlled trials suggest that Internet therapy

  3. Prompt gamma imaging with a slit camera for real-time range control in proton therapy.

    Science.gov (United States)

    Smeets, J; Roellinghoff, F; Prieels, D; Stichelbaut, F; Benilov, A; Busca, P; Fiorini, C; Peloso, R; Basilavecchia, M; Frizzi, T; Dehaes, J C; Dubus, A

    2012-06-07

    Treatments delivered by proton therapy are affected by uncertainties on the range of the beam within the patient, requiring medical physicists to add safety margins on the penetration depth of the beam. To reduce these margins and deliver safer treatments, different projects are currently investigating real-time range control by imaging prompt gammas emitted along the proton tracks in the patient. This study reports on the feasibility, development and test of a new concept of prompt gamma camera using a slit collimator to obtain a one-dimensional projection of the beam path on a scintillation detector. This concept was optimized, using the Monte Carlo code MCNPX version 2.5.0, to select high energy photons correlated with the beam range and detect them with both high statistics and sufficient spatial resolution. To validate the Monte Carlo model, spectrometry measurements of secondary particles emitted by a PMMA target during proton irradiation at 160 MeV were realized. An excellent agreement with the simulations was observed when using subtraction methods to isolate the gammas in direct incidence. A first prototype slit camera using the HiCam gamma detector was consequently prepared and tested successfully at 100 and 160 MeV beam energies. Results confirmed the potential of this concept for real-time range monitoring with millimetre accuracy in pencil beam scanning mode for typical clinical conditions. If we neglect electronic dead times and rejection of detected events, the current solution with its collimator at 15 cm from the beam axis can achieve a 1-2 mm standard deviation on range estimation in a homogeneous PMMA target for numbers of protons that correspond to doses in water at the Bragg peak as low as 15 cGy at 100 MeV and 25 cGy at 160 MeV assuming pencil beams with a Gaussian profile of 5 mm sigma at target entrance.

  4. Real-Time 3D Microwave Monitoring of Interstitial Thermal Therapy.

    Science.gov (United States)

    Chen, Guanbo; Stang, John; Haynes, Mark; Leuthardt, Eric; Moghaddam, Mahta

    2017-05-08

    We report a method for real-time 3D monitoring of thermal therapy through the use of non-contact microwave imaging. This method is predicated on using microwaves to image changes in the dielectric properties of tissue with changing temperature. Instead of the precomputed linear Born approximation that was used in prior work to speed up the frameto- frame inversions, here we use the nonlinear Distorted Born Iterative Method (DBIM) to solve the electric volume integral equation to image the temperature change. This is made possible by using a recently developed GPU accelerated conformal finite difference time domain (CFDTD) method to solve the forward problem and update the electric field in the monitored region in each DBIM iteration. Compared to our previous work, this approach provides a far superior approximation of the electric field within the volume integral equation (VIE), and thus yields a more accurate reconstruction of tissue temperature change. The proposed method is validated using a realistic numerical model of interstitial thermal therapy for a deep seated brain lesion. With the new DBIM, we reduced the average estimation error of the mean temperature within the region of interest from 2.5 to 1.0 degrees for the noise-free case, and from 2.9 to 1.7 degrees for the 2% background noise case.

  5. Dosimetric feasibility of real-time MRI-guided proton therapy

    Energy Technology Data Exchange (ETDEWEB)

    Moteabbed, M., E-mail: mmoteabbed@partners.org; Schuemann, J.; Paganetti, H. [Department of Radiation Oncology, Massachusetts General Hospital and Harvard Medical School, Boston, Massachusetts 02114 (United States)

    2014-11-01

    Purpose: Magnetic resonance imaging (MRI) is a prime candidate for image-guided radiotherapy. This study was designed to assess the feasibility of real-time MRI-guided proton therapy by quantifying the dosimetric effects induced by the magnetic field in patients’ plans and identifying the associated clinical consequences. Methods: Monte Carlo dose calculation was performed for nine patients of various treatment sites (lung, liver, prostate, brain, skull-base, and spine) and tissue homogeneities, in the presence of 0.5 and 1.5 T magnetic fields. Dose volume histogram (DVH) parameters such as D{sub 95}, D{sub 5}, and V{sub 20} as well as equivalent uniform dose were compared for the target and organs at risk, before and after applying the magnetic field. The authors further assessed whether the plans affected by clinically relevant dose distortions could be corrected independent of the planning system. Results: By comparing the resulting dose distributions and analyzing the respective DVHs, it was determined that despite the observed lateral beam deflection, for magnetic fields of up to 0.5 T, neither was the target coverage jeopardized nor was the dose to the nearby organs increased in all cases except for prostate. However, for a 1.5 T magnetic field, the dose distortions were more pronounced and of clinical concern in all cases except for spine. In such circumstances, the target was severely underdosed, as indicated by a decrease in D{sub 95} of up to 41% of the prescribed dose compared to the nominal situation (no magnetic field). Sites such as liver and spine were less affected due to higher tissue homogeneity, typically smaller beam range, and the choice of beam directions. Simulations revealed that small modifications to certain plan parameters such as beam isocenter (up to 19 mm) and gantry angle (up to 10°) are sufficient to compensate for the magnetic field-induced dose disturbances. The authors’ observations indicate that the degree of required

  6. Real-Time, In Vivo Monitoring, and Quantitative Assessment of Intra-Arterial Vasospasm Therapy.

    Science.gov (United States)

    Gölitz, Philipp; Kaschka, Iris; Lang, Stefan; Roessler, Karl; Knossalla, Frauke; Doerfler, Arnd

    2016-08-01

    Our study aimed to evaluate whether the effect of an intra-arterial vasospasm therapy can be assessed quantitatively by in vivo blood flow analysis using the postprocessing algorithm parametric color coding (PCC). We evaluated 17 patients presenting with acute clinical deterioration due to vasospasm following subarachnoidal hemorrhage treated with intra-arterial nimodipine application. Pre- and post-interventional DSA series were post-processed by PCC. The relative time to maximum opacification (rTmax) was calculated in 14 arterially and venously located points of interest. From that data, the pre- and post-interventional cerebral circulation time (CirT) was calculated. Additionally, the arterial vessel diameters were measured. Pre- and post-interventional values were compared and tested for significance, respectively. Flow analysis revealed in all arterial vessel segments a non-statistically significant prolongation of rTmax after treatment. The mean CirT was 5.62 s (±1.19 s) pre-interventionally and 5.16 s (±0.81 s) post-interventionally, and the difference turned out as statistically significant (p = 0.039). A significantly increased diameter was measurable in all arterial segments post-interventionally. PCC is a fast applicable imaging technique that allows via real-time and in vivo blood flow analysis a quantitative assessment of the effect of intra-arterial vasospasm therapy. Our results seem to validate in vivo that an intra-arterial nimodipine application induces not only vasodilatation of the larger vessels, but also improves the microcirculatory flow, leading to a shortened cerebral CirT that reaches normal range post-interventionally. Procedural monitoring via PCC offers the option to compare quantitatively different therapy regimes, which allows optimization of existing approaches and implementation of individualized treatment strategies.

  7. Adaptive Radiation Therapy for Postprostatectomy Patients Using Real-Time Electromagnetic Target Motion Tracking During External Beam Radiation Therapy

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Mingyao [Department of Radiation Oncology, Washington University School of Medicine, Saint Louis, Missouri (United States); Bharat, Shyam [Philips Research North America, Briarcliff Manor, New York (United States); Michalski, Jeff M.; Gay, Hiram A. [Department of Radiation Oncology, Washington University School of Medicine, Saint Louis, Missouri (United States); Hou, Wei-Hsien [St Louis University School of Medicine, St Louis, Missouri (United States); Parikh, Parag J., E-mail: pparikh@radonc.wustl.edu [Department of Radiation Oncology, Washington University School of Medicine, Saint Louis, Missouri (United States)

    2013-03-15

    Purpose: Using real-time electromagnetic (EM) transponder tracking data recorded by the Calypso 4D Localization System, we report inter- and intrafractional target motion of the prostate bed, describe a strategy to evaluate treatment adequacy in postprostatectomy patients receiving intensity modulated radiation therapy (IMRT), and propose an adaptive workflow. Methods and Materials: Tracking data recorded by Calypso EM transponders was analyzed for postprostatectomy patients that underwent step-and-shoot IMRT. Rigid target motion parameters during beam delivery were calculated from recorded transponder positions in 16 patients with rigid transponder geometry. The delivered doses to the clinical target volume (CTV) were estimated from the planned dose matrix and the target motion for the first 3, 5, 10, and all fractions. Treatment adequacy was determined by comparing the delivered minimum dose (D{sub min}) with the planned D{sub min} to the CTV. Treatments were considered adequate if the delivered CTV D{sub min} is at least 95% of the planned CTV D{sub min}. Results: Translational target motion was minimal for all 16 patients (mean: 0.02 cm; range: −0.12 cm to 0.07 cm). Rotational motion was patient-specific, and maximum pitch, yaw, and roll were 12.2, 4.1, and 10.5°, respectively. We observed inadequate treatments in 5 patients. In these treatments, we observed greater target rotations along with large distances between the CTV centroid and transponder centroid. The treatment adequacy from the initial 10 fractions successfully predicted the overall adequacy in 4 of 5 inadequate treatments and 10 of 11 adequate treatments. Conclusion: Target rotational motion could cause underdosage to partial volume of the postprostatectomy targets. Our adaptive treatment strategy is applicable to post-prostatectomy patients receiving IMRT to evaluate and improve radiation therapy delivery.

  8. Adaptive radiation therapy for postprostatectomy patients using real-time electromagnetic target motion tracking during external beam radiation therapy.

    Science.gov (United States)

    Zhu, Mingyao; Bharat, Shyam; Michalski, Jeff M; Gay, Hiram A; Hou, Wei-Hsien; Parikh, Parag J

    2013-03-15

    Using real-time electromagnetic (EM) transponder tracking data recorded by the Calypso 4D Localization System, we report inter- and intrafractional target motion of the prostate bed, describe a strategy to evaluate treatment adequacy in postprostatectomy patients receiving intensity modulated radiation therapy (IMRT), and propose an adaptive workflow. Tracking data recorded by Calypso EM transponders was analyzed for postprostatectomy patients that underwent step-and-shoot IMRT. Rigid target motion parameters during beam delivery were calculated from recorded transponder positions in 16 patients with rigid transponder geometry. The delivered doses to the clinical target volume (CTV) were estimated from the planned dose matrix and the target motion for the first 3, 5, 10, and all fractions. Treatment adequacy was determined by comparing the delivered minimum dose (Dmin) with the planned Dmin to the CTV. Treatments were considered adequate if the delivered CTV Dmin is at least 95% of the planned CTV Dmin. Translational target motion was minimal for all 16 patients (mean: 0.02 cm; range: -0.12 cm to 0.07 cm). Rotational motion was patient-specific, and maximum pitch, yaw, and roll were 12.2, 4.1, and 10.5°, respectively. We observed inadequate treatments in 5 patients. In these treatments, we observed greater target rotations along with large distances between the CTV centroid and transponder centroid. The treatment adequacy from the initial 10 fractions successfully predicted the overall adequacy in 4 of 5 inadequate treatments and 10 of 11 adequate treatments. Target rotational motion could cause underdosage to partial volume of the postprostatectomy targets. Our adaptive treatment strategy is applicable to post-prostatectomy patients receiving IMRT to evaluate and improve radiation therapy delivery. Copyright © 2013 Elsevier Inc. All rights reserved.

  9. Image quality in real-time teleultrasound of infant hip exam over low-bandwidth internet links: a transatlantic feasibility study.

    Science.gov (United States)

    Martinov, Dobrivoje; Popov, Veljko; Ignjatov, Zoran; Harris, Robert D

    2013-04-01

    Evolution of communication systems, especially internet-based technologies, has probably affected Radiology more than any other medical specialty. Tremendous increase in internet bandwidth has enabled a true revolution in image transmission and easy remote viewing of the static images and real-time video stream. Previous reports of real-time telesonography, such as the ones developed for emergency situations and humanitarian work, rely on high compressions of images utilized by remote sonologist to guide and supervise the unexperienced examiner. We believe that remote sonology could be also utilized in teleultrasound exam of infant hip. We tested feasibility of a low-cost teleultrasound system for infant hip and performed data analysis on the transmitted and original images. Transmission of data was accomplished with Remote Ultrasound (RU), a software package specifically designed for teleultrasound transmission through limited internet bandwidth. While image analysis of image pairs revealed statistically significant loss of information, panel evaluation failed to recognize any clinical difference between the original saved and transmitted still images.

  10. Feasibility Study of Neutron Dose for Real Time Image Guided Proton Therapy: A Monte Carlo Study

    CERN Document Server

    Kim, Jin Sung; Kim, Daehyun; Shin, EunHyuk; Chung, Kwangzoo; Cho, Sungkoo; Ahn, Sung Hwan; Ju, Sanggyu; Chung, Yoonsun; Jung, Sang Hoon; Han, Youngyih

    2015-01-01

    Two full rotating gantry with different nozzles (Multipurpose nozzle with MLC, Scanning Dedicated nozzle) with conventional cyclotron system is installed and under commissioning for various proton treatment options at Samsung Medical Center in Korea. The purpose of this study is to investigate neutron dose equivalent per therapeutic dose, H/D, to x-ray imaging equipment under various treatment conditions with monte carlo simulation. At first, we investigated H/D with the various modifications of the beam line devices (Scattering, Scanning, Multi-leaf collimator, Aperture, Compensator) at isocenter, 20, 40, 60 cm distance from isocenter and compared with other research groups. Next, we investigated the neutron dose at x-ray equipments used for real time imaging with various treatment conditions. Our investigation showed the 0.07 ~ 0.19 mSv/Gy at x-ray imaging equipments according to various treatment options and intestingly 50% neutron dose reduction effect of flat panel detector was observed due to multi- lea...

  11. Antimicrobial effect of photodynamic therapy in carious lesions in vivo, using culture and real-time PCR methods.

    Science.gov (United States)

    Araújo, Patricia Valente; Correia-Silva, Jeane de Fátima; Gomez, Ricardo Santiago; Massara, Maria de Lourdes de Andrade; Cortes, Maria Esperanza; Poletto, Luiz Thadeu de Abreu

    2015-09-01

    The aim of this study was to evaluate the antimicrobial effect of photodynamic therapy (PDT) in carious lesions in vivo by culture and real-time PCR methods. Ten teeth with deep active carious lesions were selected and five portions of carious dentin were removed for each tooth. Two increments were used as control, to represent the superficial and deep dentin, respectively. Methylene blue at 100mg/L was placed in contact with the cavity for 5min, before being irradiated with a halogen light source for 1min. Then, after PDT, other three portions were removed. The samples were processed in laboratory and the number of viable cfu was obtained. The real-time PCR analyses were performed in two increments of carious dentin, removed before and after PDT. The Streptococcus mutans DNA was isolated from carious dentin samples and amplification and detection of DNA were performed with real-time PCR. The cavities were then restored with glass-ionomer cement. Using conventional culture methods, the results demonstrated that viable bacteria were significantly reduced in all of the agar plates following photosensitization. No difference was found between both groups regarding S. mutans DNA quantification by real-time PCR. Although PDT may not affect the number of S. mutans DNA copies immediately after the treatment, clear reduction of the number of cfu was found. Despite its promising use for eliminating bacteria in dental caries treatment, further studies are necessary to establish an effective clinical protocol for the PDT. Copyright © 2015 Elsevier B.V. All rights reserved.

  12. Cherenkov imaging during volumetric modulated arc therapy for real-time radiation beam tracking and treatment response monitoring

    Science.gov (United States)

    Andreozzi, Jacqueline M.; Zhang, Rongxiao; Glaser, Adam K.; Gladstone, David J.; Jarvis, Lesley A.; Pogue, Brian W.

    2016-03-01

    External beam radiotherapy utilizes high energy radiation to target cancer with dynamic, patient-specific treatment plans. The otherwise invisible radiation beam can be observed via the optical Cherenkov photons emitted from interaction between the high energy beam and tissue. Using a specialized camera-system, the Cherenkov emission can thus be used to track the radiation beam on the surface of the patient in real-time, even for complex cases such as volumetric modulated arc therapy (VMAT). Two patients undergoing VMAT of the head and neck were imaged and analyzed, and the viability of the system to provide clinical feedback was established.

  13. Universal real-time control framework and Internet of Things for fast-paced research and development based production environments

    KAUST Repository

    Chaoui, Hicham

    2017-05-13

    This paper introduces a universal real-time control platform for complex research and development (R&D) based products design. The inherent complexity in R&D projects makes products development a difficult task to undertake. The use of state of the art development tools for modeling, simulation, and hardware-in-the-loop (HIL) validation contributes to a complexity reduction. However, R&D projects still require significant development time since many design iterations are usually necessary before final solution, which increases the cost. In most R&D processes, these tools are not used beyond rapid prototyping since development for mass production is usually performed in another environment, using different tools. This paper presents a fast and cost effective way of R&D-based products development, speeding-up time to market.

  14. Near "real" time magnetic resonance images as a monitoring system for interstitial laser therapy: experimental protocols

    Science.gov (United States)

    Castro, Dan J.; Farahani, Keyvan; Soudant, Jacques; Zwarun, Andrew A.; Lufkin, Robert B.

    1992-06-01

    The failure rate of cancer treatment remains unacceptably high, still being a leading cause of mortality in adults and children despite major advances over the past 50 years in the fields of surgery, radiation therapy and, more recently, chemo and immunotherapy. Surgical access to some deep tumors of the head and neck and other areas often require extensive dissections with residual functional and cosmetic deformities. Repeated treatment is not possible after maximum dose radiotherapy and chemotherapy is still limited by its systemic toxicity. An attractive solution to these problems would be the development of a new adjunctive method combining the best features of interstitial laser therapy for selective tumor destruction via minimally invasive techniques for access and 3-D magnetic resonance imaging (MRI) as a monitoring system for laser-tissue interactions. Interstitial laser therapy (ILT) via fiberoptics allow laser energy to be delivered directly into deeper tissues. However, this concept will become clinically useful only when noninvasive, accurate, and reproducible monitoring methods are developed to measure energy delivery to tissues. MRI has numerous advantages in evaluating the irreversible effects of laser treatment in tissues, since laser energy includes changes not only in the thermal motions of hydrogen protons within the tissue, but also in the distribution and mobility of water and lipids. These techniques should greatly improve the use of ILT in combination with MRI to allow treatment of deeper, more difficult to reach tumors of head and neck and other anatomical areas with a single needle stick.

  15. Probe-Based Confocal Laser Endomicroscopy to Guide Real-Time Endoscopic Therapy in Barrett’s Esophagus with Dysplasia

    Directory of Open Access Journals (Sweden)

    Eric A. Johnson

    2012-05-01

    Full Text Available Probe-based confocal laser endomicroscopy (pCLE is a novel imaging technique which utilizes a low-power laser light passed through a fiber-optic bundle, within a miniprobe that is advanced into the working channel, to obtain microscopic images of the mucosa. This allows the endoscopist to evaluate the microarchitecture of the gastrointestinal epithelium in real time. At this time pCLE cannot replace histopathology, but it can provide diagnostic information as well as guide therapeutic management in patients with Barrett’s esophagus (BE with high-grade dysplasia (HGD. We describe a retrospective case series in which four patients with BE and biopsy-proven HGD underwent endoscopy with pCLE to direct real-time endoscopic ablation therapy and/or endoscopic mucosal resection (EMR, which was performed in conjunction with pCLE. All four patients had pCLE showing features of HGD. After either EMR or radiofrequency ablation (RFA, pCLE was again used to evaluate the margins after therapy to assure accuracy. In one case, pCLE had features of dysplasia at the margin and further repeat EMR was immediately performed. Another case had a normal-appearing esophagus, but pCLE found features of BE in discrete areas and targeted biopsies were performed, which confirmed BE. This patient subsequently underwent RFA therapy of the residual areas of BE. In conclusion, in patients with BE and dysplasia, pCLE is an effective tool used to target biopsies, guide endoscopic therapy and assess the accuracy of EMR or RFA.

  16. Prostate tumor alignment and continuous, real-time adaptive radiation therapy using electromagnetic fiducials: clinical and cost-utility analyses.

    Science.gov (United States)

    Quigley, Martin M; Mate, Timothy P; Sylvester, John E

    2009-01-01

    To evaluate the accuracy, utility, and cost effectiveness of a new electromagnetic patient positioning and continuous, real-time monitoring system, which uses permanently implanted resonant transponders in the target (Calypso 4D Localization System and Beacon transponders, Seattle, WA) to continuously monitor tumor location and movement during external beam radiation therapy of the prostate. This clinical trial studied 43 patients at 5 sites. All patients were implanted with 3 transponders each. In 41 patients, the system was used for initial alignment at each therapy session. Thirty-five patients had continuous monitoring during their radiation treatment. Over 1,000 alignment comparisons were made to a commercially available kV X-ray positioning system (BrainLAB ExacTrac, Munich, Germany). Using decision analysis and Markov processes, the outcomes of patients were simulated over a 5-year period and measured in terms of costs from a payer's perspective and quality-adjusted life years (QALYs). All patients had satisfactory transponder implantations for monitoring purposes. In over 75% of the treatment sessions, the correction to conventional positioning (laser and tattoos) directed by an electromagnetic patient positioning and monitoring system was greater than 5 mm. Ninety-seven percent (34/35) of the patients who underwent continuous monitoring had target motion that exceeded preset limits at some point during the course of their radiation therapy. Exceeding preset thresholds resulted in user intervention at least once during the therapy in 80% of the patients (28/35). Compared with localization using ultrasound, electronic portal imaging devices (EPID), or computed tomography (CT), localization with the electromagnetic patient positioning and monitoring system yielded superior gains in QALYs at comparable costs. Most patients positioned with conventional tattoos and lasers for prostate radiation therapy were found by use of the electromagnetic patient positioning

  17. Real-time systems

    OpenAIRE

    Badr, Salah M.; Bruztman, Donald P.; Nelson, Michael L.; Byrnes, Ronald Benton

    1992-01-01

    This paper presents an introduction to the basic issues involved in real-time systems. Both real-time operating sys and real-time programming languages are explored. Concurrent programming and process synchronization and communication are also discussed. The real-time requirements of the Naval Postgraduate School Autonomous Under Vehicle (AUV) are then examined. Autonomous underwater vehicle (AUV), hard real-time system, real-time operating system, real-time programming language, real-time sy...

  18. Online dose reconstruction for tracked volumetric arc therapy: Real-time implementation and offline quality assurance for prostate SBRT.

    Science.gov (United States)

    Kamerling, Cornelis Ph; Fast, Martin F; Ziegenhein, Peter; Menten, Martin J; Nill, Simeon; Oelfke, Uwe

    2017-08-20

    Firstly, this study provides a real-time implementation of online dose reconstruction for tracked volumetric arc therapy (VMAT). Secondly, this study describes a novel offline quality assurance tool, based on commercial dose calculation algorithms. Online dose reconstruction for VMAT is a computationally challenging task in terms of computer memory usage and calculation speed. To potentially reduce the amount of memory used, we analyzed the impact of beam angle sampling for dose calculation on the accuracy of the dose distribution. To establish the performance of the method, we planned two single-arc VMAT prostate stereotactic body radiation therapy cases for delivery with dynamic MLC tracking. For quality assurance of our online dose reconstruction method we have also developed a stand-alone offline dose reconstruction tool, which utilizes the RayStation treatment planning system to calculate dose. For the online reconstructed dose distributions of the tracked deliveries, we could establish strong resemblance for 72 and 36 beam co-planar equidistant beam samples with less than 1.2% deviation for the assessed dose-volume indicators (clinical target volume D98 and D2, and rectum D2). We could achieve average runtimes of 28-31 ms per reported MLC aperture for both dose computation and accumulation, meeting our real-time requirement. To cross-validate the offline tool, we have compared the planned dose to the offline reconstructed dose for static deliveries and found excellent agreement (3%/3 mm global gamma passing rates of 99.8%-100%). Being able to reconstruct dose during delivery enables online quality assurance and online replanning strategies for VMAT. The offline quality assurance tool provides the means to validate novel online dose reconstruction applications using a commercial dose calculation engine. © 2017 The Authors. Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

  19. REAL TIME PCR IDENTIFICATION FOR TARGET ADJUNCTIVE ANTIBIOTIC THERAPY OF SEVERE CHRONIC PERIODONTITIS. PART II - MICROBIOLOGICAL EFFECTIVENESS.

    Directory of Open Access Journals (Sweden)

    Kamen Kotsilkov

    2014-10-01

    Full Text Available INTRODUCTION: Antibiotic use in chronic periodontitis may result in improvement in periodontal status, although many questions regarding the indications for this therapy remain unanswered. The polymicrobial etiology of the periodontal infection hinders the choice of the proper antibiotic agent. Furthermore the indiscriminate use of antibiotics could lead to high levels of resistance and to various adverse reactions. In the recent years a various molecular diagnostics protocols were proposed in order to facilitate the decision for adjunctive antibiotic administration. OBJECTIVE: The aim of this study is to compare the microbiological effectiveness of adjunctive antibiotic administration with the mechanical periodontal therapy. METHODS: 30 patients with severe chronic periodontitis were enrolled in this study and were divided in 3 groups: Control group – with mechanical debridement only. Test group 1 – with combined adjunctive antibiotic administration using Amoxicillin+ Metronidazole. Test group 2 – with target antibiotic administration according to the resuts from the Real Time PCR identification. RESULTS: The prevalence of all the isolated microorganisms (exept. E.nodatum and C.gingivalis in Test Group 2 demonstrates statistically significant reduction compared with the other treatment approaches. Almost complete elimination was registered for the consensus pathogens from the red and orange complexes (above 99% and 100% for P.intemedia. CONCLUSION: The adjunct antibiotic treatment targeted with Real-Time PCR identification demonstrates almost complete elimination of the putative periodontal pathogens in the deep periodontal pockets in patients with severe chronic periodontitis. This result suggests slower recolonisation of these habitats thus limiting the risk for progression of the periodontal destruction.

  20. REAL TIME PCR IDENTIFICATION FOR TARGET ADJUNCTIVE ANTIBIOTIC THERAPY OF SEVERE CHRONIC PERIODONTITIS. PART I - CLINICAL RESULTS.

    Directory of Open Access Journals (Sweden)

    Kamen Kotsilkov

    2014-10-01

    Full Text Available INTRODUCTION: The periodontal pathology is of great social importance due to the vast distribution in the human population. The adjunctive antibiotic administration could improve the healing in such cases but the latest data of the continuingly growing antibiotic resistance requires more precise approaches of antibiotic selection. The contemporary molecular diagnostic methods could offer the required precision for the microbiological identification in order to achieve better control of the periodontitis. OBJECTIVE: The aim of this study is to compare the microbiological effectiveness of adjunctive antibiotic administration with the mechanical periodontal therapy. METHODS: 30 patients with severe chronic periodontitis were enrolled in this study and were divided in 3 groups: Control group – with mechanical debridement only. Test group 1 – with combined adjunctive antibiotic administration using Amoxicillin+ Metronidazole. Test group 2 – with target antibiotic administration according to the resuts from the Real Time PCR identification. RESULTS: A considerable improvement of the periodontal status was reported in all treatment groups. The most positive results were in the group with target antibiotic administration were all tested clinical parameters showed the best improvement with statistically significant changes in sites with PD7mm and CAL>5mm. CONCLUSION: The adjunctive antibiotic administration demonstrates better clinical effectiveness concerning the reduction of the severely affected sites in cases with severe generalized chronic periodontitis compared to the mechanical therapy alone. From all examined groups the target approach has statistically significant better results. These results suggest that this approach is recommended in cases with high prevalence of deep pockets.

  1. Connecting the snowpack to the internet of things: an IPv6 architecture for providing real-time measurements of hydrologic systems

    Science.gov (United States)

    Kerkez, B.; Zhang, Z.; Oroza, C.; Glaser, S. D.; Bales, R. C.

    2012-12-01

    We describe our improved, robust, and scalable architecture by which to rapidly instrument large-scale watersheds, while providing the resulting data in real-time. Our system consists of more than twenty wireless sensor networks and thousands of sensors, which will be deployed in the American River basin (5000 sq. km) of California. The core component of our system is known as a mote, a tiny, ultra-low-power, embedded wireless computer that can be used for any number of sensing applications. Our new generation of motes is equipped with IPv6 functionality, effectively giving each sensor in the field its own unique IP address, thus permitting users to remotely interact with the devices without going through intermediary services. Thirty to fifty motes will be deployed across 1-2 square kilometer regions to form a mesh-based wireless sensor network. Redundancy of local wireless links will ensure that data will always be able to traverse the network, even if hash wintertime conditions adversely affect some network nodes. These networks will be used to develop spatial estimates of a number of hydrologic parameters, focusing especially on snowpack. Each wireless sensor network has one main network controller, which is responsible with interacting with an embedded Linux computer to relay information across higher-powered, long-range wireless links (cell modems, satellite, WiFi) to neighboring networks and remote, offsite servers. The network manager is also responsible for providing an Internet connection to each mote. Data collected by the sensors can either be read directly by remote hosts, or stored on centralized servers for future access. With 20 such networks deployed in the American River, our system will comprise an unprecedented cyber-physical architecture for measuring hydrologic parameters in large-scale basins. The spatiotemporal density and real-time nature of the data is also expected to significantly improve operational hydrology and water resource

  2. 基于Internet/Intranet的机组实时参数监视系统%Real-time Parameters Monitoring System of Generating Units Based upon Internet/Intranet

    Institute of Scientific and Technical Information of China (English)

    张琨; 石喜光; 汪辉

    2000-01-01

    介绍沙角发电总厂 C 厂的实时参数监视系统的接口方案和基本功能,分析系统采用Browser/WebServer/DatabaseServer 计算模式特点,阐述 Internet/Intranet 环境下的实时信息系统的实现方法.

  3. Adaptive Radiation Therapy for Post-Prostatectomy Patients Using Real-Time Electromagnetic Target Motion Tracking During External Beam Radiotherapy

    Science.gov (United States)

    Zhu, Mingyao; Bharat, Shyam; Michalski, Jeff M.; Gay, H; Hou, Wei-Hsien; Parikh, Parag J.

    2012-01-01

    Purpose Using real-time electromagnetic (EM) transponder tracking data recorded by the Calypso® 4D Localization System, we report inter- and intrafractional target motion of the prostate bed, describe a strategy to evaluate treatment adequacy in post-prostatectomy patients receiving intensity modulated radiation therapy (IMRT), and propose an adaptive workflow. Methods and Materials Tracking data recorded by Calypso EM transponders was analyzed for post-prostatectomy patients that underwent step-and-shoot IMRT. Rigid target motion parameters during beam delivery were calculated from recorded transponder positions in 16 patients with rigid transponder geometry. The delivered doses to the clinical target volume (CTV) were estimated from the planned dose matrix and the target motion for the first 3, 5, 10, and all fractions. Treatment adequacy was determined by comparing the delivered minimum dose (Dmin) with the planned Dmin to the CTV. Treatments were considered adequate if the delivered CTV Dmin is at least 95% of the planned CTV Dmin. Results Translational target motion was minimal for all 16 patients (mean: 0.02 cm; range: − 0.12 cm to 0.07 cm). Rotational motion was patient-specific, and maximum pitch, yaw, and roll were 12.2, 4.1, and 10.5 degrees, respectively. We observed inadequate treatments in 5 patients. In these treatments, we observed greater target rotations along with large distances between the CTV centroid and transponder centroid. The treatment adequacy from the initial 10 fractions successfully predicted the overall adequacy in 4 of 5 inadequate treatments and 10 of 11 adequate treatments. Conclusion Target rotational motion could cause under-dosage to partial volume of the post-prostatectomy targets. Our adaptive treatment strategy is applicable to post-prostatectomy patients receiving IMRT to evaluate and improve radiation therapy delivery. PMID:23021439

  4. Epidemiological characterization of diabetic patients on therapy with continuous subcutaneous insulin infusion and continuous glucose monitoring in real time.

    Science.gov (United States)

    Aristizábal, Natalia; Ramírez, Alex; Hincapié-García, Jaime; Laiton, Estefany; Aristizábal, Carolina; Cuesta, Diana; Monsalve, Claudia; Hincapié, Gloria; Zapata, Eliana; Abad, Verónica; Delgado, Maria-Rocio; Torres, José-Luis; Palacio, Andrés; Botero, José

    2015-11-01

    To describe baseline characteristics of diabetic patients who were started on insulin pump and real time continuous glucose monitor (CSII-rtCGM) in a specialized center in Medellin, Colombia. All patients with diabetes with complete data who were started on CSII-rtCGM between February 2010 and May 2014 were included. This is a descriptive analysis of the sociodemographic and clinical characteristics. 141 of 174 patients attending the clinic were included. 90,1% had type 1diabetes (T1D). The average age of T1D patients at the beginning of therapy was 31,4 years (SD 14,1). 75.8% of patients had normal weight (BMI30). The median duration of T1D was 13 years (P25-P75=10.7-22.0). 14,2% of the patients were admitted at least once in the year preceding the start of CSII-rtCGM because of diabetes related complications. Mean A1c was 8.6%±1.46%. The main reasons for starting CSII-rtCGM were: poor glycemic control (50.2%); frequent hypoglycemia, nocturnal hypoglycemia, hypoglycemia related to exercise, asymptomatic hypoglycemia (30.2%); severe hypoglycemia (16.44%) and dawn phenomena (3.1%). Baseline characteristics of patients included in this study who were started on CSII-rtCGM are similar to those reported in the literature. The Clinic starts CSII-rtCGM mainly in T1D patients with poor glycemic control, frequent or severe hypoglycemia despite being on basal/bolus therapy. Copyright © 2015 SEEN. Published by Elsevier España, S.L.U. All rights reserved.

  5. Qos Real-Time Control Technology on Internet of Things%基于物联网的QoS实时控制技术研究

    Institute of Scientific and Technical Information of China (English)

    郑志凌; 杜飞明; 杨幸

    2015-01-01

    With the increasing development of Internet of Things(IOT) technology and related business needs, the terminations of IOT not only required anytime and anywhere to access the network, but also need to safeguard the necessary normal operation of relevant QoS on daily business, this article analyzes the case studies of the QoS application of IOT in control technology and packet scheduling algorithm, and propose based on QoS service model of IOT and real-time control technology.%随着物联网技术的发展和相关业务需求的增加,物联网终端不仅要求能随时、随地接入网络,而且需要保障相关业务正常运行所必须的QoS,该文在分析了物联网的应用情况,研究了QoS的控制技术和分组调度算法,提出了基于物联网的QoS服务模型以及实时控制技术。

  6. First demonstration of real-time gamma imaging by using a handheld Compton camera for particle therapy

    Science.gov (United States)

    Taya, T.; Kataoka, J.; Kishimoto, A.; Iwamoto, Y.; Koide, A.; Nishio, T.; Kabuki, S.; Inaniwa, T.

    2016-09-01

    The use of real-time gamma imaging for cancer treatment in particle therapy is expected to improve the accuracy of the treatment beam delivery. In this study, we demonstrated the imaging of gamma rays generated by the nuclear interactions during proton irradiation, using a handheld Compton camera (14 cm×15 cm×16 cm, 2.5 kg) based on scintillation detectors. The angular resolution of this Compton camera is ∼8° at full width at half maximum (FWHM) for a 137Cs source. We measured the energy spectra of the gamma rays using a LaBr3(Ce) scintillator and photomultiplier tube, and using the handheld Compton camera, performed image reconstruction when using a 70 MeV proton beam to irradiate a water, Ca(OH)2, and polymethyl methacrylate (PMMA) phantom. In the energy spectra of all three phantoms, we found an obvious peak at 511 keV, which was derived from annihilation gamma rays, and in the energy spectrum of the PMMA phantom, we found another peak at 718 keV, which contains some of the prompt gamma rays produced from 10B. Therefore, we evaluated the peak positions of the projection from the reconstructed images of the PMMA phantom. The differences between the peak positions and the Bragg peak position calculated using simulation are 7 mm±2 mm and 3 mm±8 mm, respectively. Although we could quickly acquire online gamma imaging of both of the energy ranges during proton irradiation, we cannot arrive at a clear conclusion that prompt gamma rays sufficiently trace the Bragg peak from these results because of the uncertainty given by the spatial resolution of the Compton camera. We will develop a high-resolution Compton camera in the near future for further study.

  7. Internet-accessible, near-real-time volcano monitoring data for geoscience education: the Volcanoes Exploration Project—Pu`u `O`o

    Science.gov (United States)

    Poland, M. P.; Teasdale, R.; Kraft, K.

    2010-12-01

    Internet-accessible real- and near-real-time Earth science datasets are an important resource for geoscience education, but relatively few comprehensive datasets are available, and background information to aid interpretation is often lacking. In response to this need, the U.S. Geological Survey’s (USGS) Hawaiian Volcano Observatory, in collaboration with the National Aeronautics and Space Administration and the University of Hawai‘i, Mānoa, established the Volcanoes Exploration Project: Pu‘u ‘O‘o (VEPP). The VEPP Web site provides access, in near-real time, to geodetic, seismic, and geologic data from the Pu‘u ‘O‘o eruptive vent on Kilauea Volcano, Hawai‘i. On the VEPP Web site, a time series query tool provides a means of interacting with continuous geophysical data. In addition, results from episodic kinematic GPS campaigns and lava flow field maps are posted as data are collected, and archived Webcam images from Pu‘u ‘O‘o crater are available as a tool for examining visual changes in volcanic activity over time. A variety of background information on volcano surveillance and the history of the 1983-present Pu‘u ‘O‘o-Kupaianaha eruption puts the available monitoring data in context. The primary goal of the VEPP Web site is to take advantage of high visibility monitoring data that are seldom suitably well-organized to constitute an established educational resource. In doing so, the VEPP project provides a geoscience education resource that demonstrates the dynamic nature of volcanoes and promotes excitement about the process of scientific discovery through hands-on learning. To support use of the VEPP Web site, a week-long workshop was held at Kilauea Volcano in July 2010, which included 25 participants from the United States and Canada. The participants represented a diverse cross-section of higher learning, from community colleges to research universities, and included faculty who teach both large introductory non-major classes

  8. First demonstration of real-time gamma imaging by using a handheld Compton camera for particle therapy

    Energy Technology Data Exchange (ETDEWEB)

    Taya, T., E-mail: taka48138@ruri.waseda.jp [Research Institute for Science and Engineering, Waseda University, 3-4-1 Okubo, Shinjuku, Tokyo 169-8555 (Japan); Kataoka, J.; Kishimoto, A.; Iwamoto, Y.; Koide, A. [Research Institute for Science and Engineering, Waseda University, 3-4-1 Okubo, Shinjuku, Tokyo 169-8555 (Japan); Nishio, T. [Graduate School of Biomedical and Health Science, Hiroshima University, 1-2-3, Kasumi, Minami-ku, Hiroshima-shi, Hiroshima (Japan); Kabuki, S. [School of Medicine, Tokai University, 143 Shimokasuya, Isehara-shi, Kanagawa (Japan); Inaniwa, T. [National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba-shi, Chiba (Japan)

    2016-09-21

    The use of real-time gamma imaging for cancer treatment in particle therapy is expected to improve the accuracy of the treatment beam delivery. In this study, we demonstrated the imaging of gamma rays generated by the nuclear interactions during proton irradiation, using a handheld Compton camera (14 cm×15 cm×16 cm, 2.5 kg) based on scintillation detectors. The angular resolution of this Compton camera is ∼8° at full width at half maximum (FWHM) for a {sup 137}Cs source. We measured the energy spectra of the gamma rays using a LaBr{sub 3}(Ce) scintillator and photomultiplier tube, and using the handheld Compton camera, performed image reconstruction when using a 70 MeV proton beam to irradiate a water, Ca(OH){sub 2}, and polymethyl methacrylate (PMMA) phantom. In the energy spectra of all three phantoms, we found an obvious peak at 511 keV, which was derived from annihilation gamma rays, and in the energy spectrum of the PMMA phantom, we found another peak at 718 keV, which contains some of the prompt gamma rays produced from {sup 10}B. Therefore, we evaluated the peak positions of the projection from the reconstructed images of the PMMA phantom. The differences between the peak positions and the Bragg peak position calculated using simulation are 7 mm±2 mm and 3 mm±8 mm, respectively. Although we could quickly acquire online gamma imaging of both of the energy ranges during proton irradiation, we cannot arrive at a clear conclusion that prompt gamma rays sufficiently trace the Bragg peak from these results because of the uncertainty given by the spatial resolution of the Compton camera. We will develop a high-resolution Compton camera in the near future for further study. - Highlights: • Gamma imaging during proton irradiation by a handheld Compton camera is demonstrated. • We were able to acquire the online gamma-ray images quickly. • We are developing a high resolution Compton camera for range verification.

  9. Comparable performance of TMA and Real-Time PCR in detecting minimal residual hepatitis C viraemia at the end of antiviral therapy.

    Science.gov (United States)

    Bortoletto, Gladis; Campagnolo, Davide; Mirandola, Silvia; Comastri, Giuseppe; Severini, Letizia; Pulvirenti, Franco Renato; Alberti, Alfredo

    2011-03-01

    Antiviral therapy for chronic hepatitis C may cause transient on-treatment response followed by post-treatment relapse. We have compared the prognostic value for post-treatment relapse of minimal hepatitis C residual viraemia detected at end-of-therapy by transcription mediated assay (TMA) and by Abbott RealTime PCR HCV assay. Minimal residual viraemia was investigated in 202 HCV patients who had completed a full course of Pegylated Interferon (PEG-IFN) plus ribavirin and were HCV-RNA negative by conventional PCR in two separate serum samples obtained during the last week of therapy and the results were then correlated with post-treatment outcome. Minimal residual viraemia was detected in 22/202 (11%, 95% CI: 7-16%) and in 28/202 (13.8%, 95% CI 10-19%) patients by TMA and by Abbott RealTime HCV assay, respectively, with 92% concordant results. Post-treatment relapse was seen in 81.8% (95% CI: 60-93%) of TMA positive and in 82.1% (95% CI: 64-92%) of Abbott RealTime HCV assay positive cases compared to 16.6% (95% CI: 12-23%) of TMA negative and 17.2% (95% CI: 12-23%) of Abbott RealTime HCV assay negative patients. These results indicate that TMA and the Abbott RealTime HCV assay have comparable sensitivity and specificity in identifying minimal residual viraemia at the end of antiviral therapy, with excellent predictive value for post-treatment relapse. Copyright © 2010 Elsevier B.V. All rights reserved.

  10. On line CALDose{sub X}: real time Monte Carlo calculation via Internet for dosimetry in radiodiagnostic; CALDose{sub X} online: Calculos de Monte Carlo em tempo real via Internet para dosimetria em radiodiagnostico

    Energy Technology Data Exchange (ETDEWEB)

    Kramer, Richard; Cassola, Vagner Ferreira; Lira, Carlos Alberto Brayner de Oliveira; Khoury, Helen Jamil, E-mail: rkramer@uol.com.b, E-mail: vagner.cassola@gmail.co [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. de Energia Nuclear; Cavalcanti, Arthur; Lins, Rafael Dueire, E-mail: rdl@ufpe.b [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Centro de Tecnologia e Geociencias. Dept. de Eletronica e Sistemas

    2011-10-26

    The CALDose{sub X} 4.1 is a software which uses thr MASH and FASH phantoms. Patient dosimetry with reference phantoms is limited because the results can be applied only for patients which possess the same body mass and right height that the reference phantom. In this paper, the dosimetry of patients for diagnostic with X ray was extended by using a series of 18 phantoms with defined gender, different body masses and heights, in order to cover the real anatomy of the patients. It is possible to calculate absorbed doses in organs and tissues by real time Monte Carlo dosimetry through the Internet through a dosimetric service called CALDose{sub X} on line

  11. Real Time Systems

    DEFF Research Database (Denmark)

    Christensen, Knud Smed

    2000-01-01

    Describes fundamentals of parallel programming and a kernel for that. Describes methods for modelling and checking parallel problems. Real time problems.......Describes fundamentals of parallel programming and a kernel for that. Describes methods for modelling and checking parallel problems. Real time problems....

  12. Real Time Systems

    DEFF Research Database (Denmark)

    Christensen, Knud Smed

    2000-01-01

    Describes fundamentals of parallel programming and a kernel for that. Describes methods for modelling and checking parallel problems. Real time problems.......Describes fundamentals of parallel programming and a kernel for that. Describes methods for modelling and checking parallel problems. Real time problems....

  13. Evaluation of Stream Mining Classifiers for Real-Time Clinical Decision Support System: A Case Study of Blood Glucose Prediction in Diabetes Therapy

    Directory of Open Access Journals (Sweden)

    Simon Fong

    2013-01-01

    Full Text Available Earlier on, a conceptual design on the real-time clinical decision support system (rt-CDSS with data stream mining was proposed and published. The new system is introduced that can analyze medical data streams and can make real-time prediction. This system is based on a stream mining algorithm called VFDT. The VFDT is extended with the capability of using pointers to allow the decision tree to remember the mapping relationship between leaf nodes and the history records. In this paper, which is a sequel to the rt-CDSS design, several popular machine learning algorithms are investigated for their suitability to be a candidate in the implementation of classifier at the rt-CDSS. A classifier essentially needs to accurately map the events inputted to the system into one of the several predefined classes of assessments, such that the rt-CDSS can follow up with the prescribed remedies being recommended to the clinicians. For a real-time system like rt-CDSS, the major technological challenges lie in the capability of the classifier to process, analyze and classify the dynamic input data, quickly and upmost reliably. An experimental comparison is conducted. This paper contributes to the insight of choosing and embedding a stream mining classifier into rt-CDSS with a case study of diabetes therapy.

  14. Real-time shadows

    CERN Document Server

    Eisemann, Elmar; Assarsson, Ulf; Wimmer, Michael

    2011-01-01

    Important elements of games, movies, and other computer-generated content, shadows are crucial for enhancing realism and providing important visual cues. In recent years, there have been notable improvements in visual quality and speed, making high-quality realistic real-time shadows a reachable goal. Real-Time Shadows is a comprehensive guide to the theory and practice of real-time shadow techniques. It covers a large variety of different effects, including hard, soft, volumetric, and semi-transparent shadows.The book explains the basics as well as many advanced aspects related to the domain

  15. Feasibility study of the neutron dose for real-time image-guided proton therapy: A Monte Carlo study

    Science.gov (United States)

    Kim, Jin Sung; Shin, Jung Suk; Kim, Daehyun; Shin, Eunhyuk; Chung, Kwangzoo; Cho, Sungkoo; Ahn, Sung Hwan; Ju, Sanggyu; Chung, Yoonsun; Jung, Sang Hoon; Han, Youngyih

    2015-07-01

    Two full rotating gantries with different nozzles (multipurpose nozzle with MLC, scanning dedicated nozzle) for a conventional cyclotron system are installed and being commissioned for various proton treatment options at Samsung Medical Center in Korea. The purpose of this study is to use Monte Carlo simulation to investigate the neutron dose equivalent per therapeutic dose, H/D, for X-ray imaging equipment under various treatment conditions. At first, we investigated the H/D for various modifications of the beamline devices (scattering, scanning, multi-leaf collimator, aperture, compensator) at the isocenter and at 20, 40 and 60 cm distances from the isocenter, and we compared our results with those of other research groups. Next, we investigated the neutron dose at the X-ray equipment used for real-time imaging under various treatment conditions. Our investigation showed doses of 0.07 ~ 0.19 mSv/Gy at the X-ray imaging equipment, depending on the treatment option and interestingly, the 50% neutron dose reduction was observed due to multileaf collimator during proton scanning treatment with the multipurpose nozzle. In future studies, we plan to measure the neutron dose experimentally and to validate the simulation data for X-ray imaging equipment for use as an additional neutron dose reduction method.

  16. A proton beam therapy system dedicated to spot-scanning increases accuracy with moving tumors by real-time imaging and gating and reduces equipment size.

    Directory of Open Access Journals (Sweden)

    Shinichi Shimizu

    Full Text Available PURPOSE: A proton beam therapy (PBT system has been designed which dedicates to spot-scanning and has a gating function employing the fluoroscopy-based real-time-imaging of internal fiducial markers near tumors. The dose distribution and treatment time of the newly designed real-time-image gated, spot-scanning proton beam therapy (RGPT were compared with free-breathing spot-scanning proton beam therapy (FBPT in a simulation. MATERIALS AND METHODS: In-house simulation tools and treatment planning system VQA (Hitachi, Ltd., Japan were used for estimating the dose distribution and treatment time. Simulations were performed for 48 motion parameters (including 8 respiratory patterns and 6 initial breathing timings on CT data from two patients, A and B, with hepatocellular carcinoma and with clinical target volumes 14.6 cc and 63.1 cc. The respiratory patterns were derived from the actual trajectory of internal fiducial markers taken in X-ray real-time tumor-tracking radiotherapy (RTRT. RESULTS: With FBPT, 9/48 motion parameters achieved the criteria of successful delivery for patient A and 0/48 for B. With RGPT 48/48 and 42/48 achieved the criteria. Compared with FBPT, the mean liver dose was smaller with RGPT with statistical significance (p<0.001; it decreased from 27% to 13% and 28% to 23% of the prescribed doses for patients A and B, respectively. The relative lengthening of treatment time to administer 3 Gy (RBE was estimated to be 1.22 (RGPT/FBPT: 138 s/113 s and 1.72 (207 s/120 s for patients A and B, respectively. CONCLUSIONS: This simulation study demonstrated that the RGPT was able to improve the dose distribution markedly for moving tumors without very large treatment time extension. The proton beam therapy system dedicated to spot-scanning with a gating function for real-time imaging increases accuracy with moving tumors and reduces the physical size, and subsequently the cost of the equipment as well as of the building housing the

  17. Real-time monitoring of high-intensity focused ultrasound thermal therapy using the manifold learning method.

    Science.gov (United States)

    Rangraz, Parisa; Behnam, Hamid; Sobhebidari, Pooya; Tavakkoli, Jahan

    2014-12-01

    High-intensity focused ultrasound (HIFU) induces thermal lesions by increasing the tissue temperature in a tight focal region. The main ultrasound imaging techniques currently used to monitor HIFU treatment are standard pulse-echo B-mode ultrasound imaging, ultrasound temperature estimation and elastography-based methods. The present study was carried out on ex vivo animal tissue samples, in which backscattered radiofrequency (RF) signals were acquired in real time at time instances before, during and after HIFU treatment. The manifold learning algorithm, a non-linear dimensionality reduction method, was applied to RF signals whichconstruct B-mode images to detect the HIFU-induced changes among the image frames obtained during HIFU treatment. In this approach, the embedded non-linear information in the region of interest of sequential images is represented in a 2-D manifold with the Isomap algorithm, and each image is depicted as a point on the reconstructed manifold. Four distinct regions are chosen in the manifold corresponding to the four phases of HIFU treatment (before HIFU treatment, during HIFU treatment, immediately after HIFU treatment and 10-min after HIFU treatment). It was found that disorganization of the points is achieved by increasing the acoustic power, and if the thermal lesion has been formed, the regions of points related to pre- and post-HIFU significantly differ. Moreover, the manifold embedding was repeated on 2-D moving windows in RF data envelopes related to pre- and post-HIFU exposure data frames. It was concluded that if mean values of the points related to pre- and post-exposure frames in the reconstructed manifold are estimated, and if the Euclidean distance between these two mean values is calculated and the sliding window is moved and this procedure is repeated for the whole image, a new image based on the Euclidean distance can be formed in which the HIFU thermal lesion is detectable.

  18. Real-time streamflow conditions

    Science.gov (United States)

    Graczyk, David J.; Gebert, Warren A.

    1996-01-01

    Would you like to know streamflow conditions before you go fishing in Wisconsin or in more distant locations? Real-time streamflow data throughout Wisconsin and the United States are available on the Internet from the U.S. Geological Survey. You can see if the stream you are interested in fishing is high due to recent rain or low because of an extended dry spell. Flow conditions at more than 100 stream-gaging stations located throughout Wisconsin can be viewed by accessing the Wisconsin District Home Page at: http://wwwdwimdn.er.usgs.gov

  19. An improved optical flow tracking technique for real-time MR-guided beam therapies in moving organs

    NARCIS (Netherlands)

    Zachiu, C.; Papadakis, N.; Ries, M.; Moonen, C.; de Senneville, B. Denis

    2015-01-01

    Magnetic resonance (MR) guided high intensity focused ultrasound and external beam radiotherapy interventions, which we shall refer to as beam therapies/interventions, are promising techniques for the non-invasive ablation of tumours in abdominal organs. However, therapeutic energy delivery in these

  20. Cellular-based and internet-enabled real-time reporting of the tsunami at Goa and Kavaratti Island due to Mw 8.4 earthquake in Sumatra on 12 September 2007

    Digital Repository Service at National Institute of Oceanography (India)

    Desai, R.G.P.; Joseph, A.; Mehra, P.; Agarvadekar, Y.; Tengali, S.; Vijaykumar, K.

    stream_size 26570 stream_content_type text/plain stream_name Curr_Sci_94_1151.pdf.txt stream_source_info Curr_Sci_94_1151.pdf.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 RESEARCH ARTICLES CURRENT... the features of the tsunami that arrived at these two sites together with the judicious selection of sea-level sensing methodology and the technology incorporated for cost-effective real-time graphical reporting of tsunami waves on the Internet using...

  1. Preliminary results of the Gas Electron Multiplier (GEM) as real-time beam monitor in hadron therapy

    Science.gov (United States)

    Aza, E.; Ciocca, M.; Murtas, F.; Puddu, S.; Pullia, M.; Silari, M.

    2017-01-01

    The use of proton and carbon ion beams in cancer therapy (also known as hadron therapy) is progressively growing worldwide due to their improved dose distributions, sparing of healthy tissues and (for carbon ions) increased radiobiological effectiveness especially for radio-resistant tumours. Strict Quality Assurance (QA) protocols need to be followed for guaranteeing the clinical beam specifications. The aim of this study was to assess the performance of a gaseous detector based on the Gas Electron Multiplier (GEM) technology for measuring the beam spot dimensions and the homogeneity of the scanned irradiation field, which are daily QA tasks commonly performed using radiochromic films. Measurements performed at the National Centre for Oncological Hadron Therapy (CNAO) in Pavia (Italy) showed that the detector is able to monitor the 2D beam image on-line with a pad granularity of 2 mm and a response proportional to the number of delivered particles. The dose homogeneity was measured with low deviation from the results obtained with radiochromic films.

  2. Real-time radiography

    Energy Technology Data Exchange (ETDEWEB)

    Bossi, R.H.; Oien, C.T.

    1981-02-26

    Real-time radiography is used for imaging both dynamic events and static objects. Fluorescent screens play an important role in converting radiation to light, which is then observed directly or intensified and detected. The radiographic parameters for real-time radiography are similar to conventional film radiography with special emphasis on statistics and magnification. Direct-viewing fluoroscopy uses the human eye as a detector of fluorescent screen light or the light from an intensifier. Remote-viewing systems replace the human observer with a television camera. The remote-viewing systems have many advantages over the direct-viewing conditions such as safety, image enhancement, and the capability to produce permanent records. This report reviews real-time imaging system parameters and components.

  3. Real-time Cosmology

    CERN Document Server

    Quercellini, Claudia; Balbi, Amedeo; Cabella, Paolo; Quartin, Miguel

    2010-01-01

    In recent years the possibility of measuring the temporal change of radial and transverse position of sources in the sky in real time have become conceivable thanks to the thoroughly improved technique applied to new astrometric and spectroscopic experiments, leading to the research domain we call Real-time cosmology. We review for the first time great part of the work done in this field, analysing both the theoretical framework and some endeavor to foresee the observational strategies and their capability to constrain models. We firstly focus on real time measurements of the overall redshift drift and angular separation shift in distant source, able to trace background cosmic expansion and large scale anisotropy, respectively. We then examine the possibility of employing the same kind of observations to probe peculiar and proper acceleration in clustered systems and therefore the gravitational potential. The last two sections are devoted to the short time future change of the cosmic microwave background, as ...

  4. Real-Time Shading

    CERN Document Server

    Olano, Marc

    2002-01-01

    This book covers real-time shading systems, their design and how they work. Procedural shading, long valued for off-line rendering and production animation is now possible on interactive graphics hardware. These developments are important for areas such as game development, product design, and scientific visualization, among others. The authors include examples of techniques for achieving common effects efficiently in a real-time shading language ranging from full procedural shading on advanced specialized hardware to limited, yet surprisingly flexible shading on unextended OpenGL, to modern P

  5. Internet as a Source of Long-Term and Real-Time Professional, Psychological, and Nutritional Treatment: A Qualitative Case Study Among Former Israeli Soviet Union Immigrants

    Science.gov (United States)

    2017-01-01

    Background The Internet is considered to be an effective source of health information and consultation for immigrants. Nutritional interventions for immigrants have become increasingly common over the past few decades. However, each population of immigrants has specific needs. Understanding the factors influencing the success of nutrition programs among immigrants requires an examination of their attitudes and perceptions, as well as their cultural values. Objective The purpose of this study was to examine perceptions of the Internet as a tool for long-term and “real-time” professional, psychological, and nutritional treatment for immigrants from the former Soviet Union who immigrated to Israel (IIFSU) from 1990 to 2012. Methods A sample of nutrition forum users (n=18) was interviewed and comments of 80 users were analyzed qualitatively in accordance with the grounded theory principles. Results The results show that IIFSU perceive the Internet as a platform for long-term and “real-time” dietary treatment and not just as an informative tool. IIFSU report benefits of online psychological support with professional dietary treatment. They attribute importance to cultural customization, which helps reduce barriers to intervention. Conclusions In light of the results, when formulating nutritional programs, it is essential to have a specific understanding of immigrants’ cultural characteristics and their patterns of Internet use concerning dietary care. PMID:28159729

  6. Real-Time Evaluations

    Directory of Open Access Journals (Sweden)

    UNHCR

    2002-07-01

    Full Text Available A real-time evaluation (RTE is a timely, rapid andinteractive review of a fast evolving humanitarianoperation undertaken at an early phase. Its broadobjectives are to gauge the effectiveness and impactof a given UNHCR response and to ensure that itsfindings are used as an immediate catalyst fororganisational and operational change.

  7. Dosimetric Comparison of Real-Time MRI-Guided Tri-Cobalt-60 Versus Linear Accelerator-Based Stereotactic Body Radiation Therapy Lung Cancer Plans.

    Science.gov (United States)

    Wojcieszynski, Andrzej P; Hill, Patrick M; Rosenberg, Stephen A; Hullett, Craig R; Labby, Zacariah E; Paliwal, Bhudatt; Geurts, Mark W; Bayliss, R Adam; Bayouth, John E; Harari, Paul M; Bassetti, Michael F; Baschnagel, Andrew M

    2017-06-01

    -cobalt-60 radiation therapy is capable of delivering lung high-quality stereotactic body radiation therapy plans that are clinically acceptable as compared to volumetric-modulated arc therapy-based plans. Real-time magnetic resonance imaging provides the unique capacity to directly observe tumor motion during treatment for purposes of motion management.

  8. MALDI-TOF alone versus MALDI-TOF combined with real-time antimicrobial stewardship interventions on time to optimal antimicrobial therapy in patients with positive blood cultures.

    Science.gov (United States)

    Beganovic, Maya; Costello, Michael; Wieczorkiewicz, Sarah M

    2017-02-22

    Introduction: Matrix-assisted laser desorption ionization time of flight (MALDI-TOF) decreases time to organism identification and improves clinical and financial outcomes. The purpose of this study was to evaluate the impact of MALDI-TOF alone vs MALDI-TOF combined with real-time, pharmacist-driven, antimicrobial stewardship (AMS) intervention on patient outcomes.Methods: This single-center, pre-post quasi-experimental study evaluated hospitalized patients with positive blood cultures identified via MALDI-TOF combined with prospective AMS intervention, compared to a control cohort with MALDI-TOF identification without AMS intervention. AMS intervention included: real-time MALDI-TOF pharmacist notification, and prospective AMS provider feedback. The primary outcome was time to optimal antimicrobial therapy (TTOT).Results: A total of 252 blood cultures were included for final analysis: 126 in each group. MALDI-TOF + AMS intervention significantly reduced overall TTOT (75.17 vs 43.06 h, p <0.001), Gram + contaminant TTOT (48.21 vs 11.75 h, p <0.001), Gram - infection (GNI) TTOT (71.83 vs 35.98 h, p <0.001), and reduced overall hospital LOS (15.03 vs 9.02 days, p 0.021). TTOT for Gram + infection (GPI) was improved (64.04 vs 41.61 h, p 0.082). For GPI: reduced hospital LOS (14.64 vs 10.31 days, p 0.002) and length of antimicrobial therapy 24.30 vs 18.97 days, p 0.018). For GNI: reduced time to microbiologic clearance (51.13 vs 34.51 h, p <0.001), hospital LOS (15.40 vs 7.90 days, p 0.027), and ICU LOS (5.55 vs 1.19 days, p 0.035).Conclusion: In order to achieve optimal outcomes, rapid identification with MALDI-TOF combined with real-time AMS interventions is more impactful than MALDI-TOF alone.

  9. Real Time Processing

    CERN Document Server

    CERN. Geneva; ANDERSON, Dustin James; DOGLIONI, Caterina

    2015-01-01

    The LHC provides experiments with an unprecedented amount of data. Experimental collaborations need to meet storage and computing requirements for the analysis of this data: this is often a limiting factor in the physics program that would be achievable if the whole dataset could be analysed. In this talk, I will describe the strategies adopted by the LHCb, CMS and ATLAS collaborations to overcome these limitations and make the most of LHC data: data parking, data scouting, and real-time analysis.

  10. Real Time Econometrics

    OpenAIRE

    Pesaran, M. Hashem; Timmermann, Allan

    2004-01-01

    This paper considers the problems facing decision makers using econometric models in real time. It identifies the key stages involved and highlights the role of automated systems in reducing the effect of data snooping. It sets out many choices that researchers face in construction of automated systems and discusses some of the possible ways advanced in the literature for dealing with them. The role of feedbacks from the decision maker?s actions to the data generating process is also discusse...

  11. [Information about electroconvulsive therapy on the internet].

    Science.gov (United States)

    Degraeve, G; Van Heeringen, C; Audenaert, K

    2006-01-01

    This article aims to provide a quantitative and qualitative assessment of the information about electroconvulsive therapy that is currently available on the internet. We carried out a quantitative assessment by entering five search terms into eight (meta)search engines. We achieved our qualitative assessment by visiting the first twenty websites generated by each search on one of the search engines, in particular Google (www.google.com), and by scoring these websites with an adapted Sandvik-score. We conclude that the scored websites are technically sound but are incomplete as far as content is concerned.

  12. Real time Faraday spectrometer

    Science.gov (United States)

    Smith, Jr., Tommy E.; Struve, Kenneth W.; Colella, Nicholas J.

    1991-01-01

    This invention uses a dipole magnet to bend the path of a charged particle beam. As the deflected particles exit the magnet, they are spatially dispersed in the bend-plane of the magnet according to their respective momenta and pass to a plurality of chambers having Faraday probes positioned therein. Both the current and energy distribution of the particles is then determined by the non-intersecting Faraday probes located along the chambers. The Faraday probes are magnetically isolated from each other by thin metal walls of the chambers, effectively providing real time current-versus-energy particle measurements.

  13. Fabrication of Graphene and AuNP Core Polyaniline Shell Nanocomposites as Multifunctional Theranostic Platforms for SERS Real-time Monitoring and Chemo-photothermal Therapy.

    Science.gov (United States)

    Chen, Haolin; Liu, Zhiming; Li, Songyang; Su, Chengkang; Qiu, Xuejun; Zhong, Huiqing; Guo, Zhouyi

    2016-01-01

    In this work, novel theranostic platforms based on graphene oxide and AuNP core polyaniline shell (GO-Au@PANI) nanocomposites are fabricated for simultaneous SERS imaging and chemo-photothermal therapy. PANI, a new NIR photothermal therapy agent with strong NIR absorption, outstanding stability and low cytotoxicity is decorated on AuNPs by one-pot oxidative polymerization, then the Au@PANI core-shell nanoparticles are attached to the graphene oxide (GO) sheet via π-π stacking and electrostatic interaction. The obtained GO-Au@PANI nanohybirds exhibit excellent NIR photothermal transduction efficiency and ultrahigh drug-loading capacity. The nanocomposites can also serve as novel NIR SERS probes utilizing the intense SERS signals of PANI. Rapid SERS imaging of cancer cells is achieved using this ultrasensitive nanoprobe. GO-Au@PANI also reveals good capability of drug delivery with the DOX-loading efficiency of 189.2% and sensitive NIR/pH-responsive DOX release. The intracellular real-time drug release dynamics from the nanocomposites is monitored by SERS-fluorescence dual mode imaging. Finally, chemo-photothermal ablation of cancer cells is carried out in vitro and in vivo using GO-Au@PANI as high-performance chemo-photothermal therapeutic nanoagent. The theranostic applications of GO-Au@PANI endow it with great potential for personalized and precise cancer medicine.

  14. Optimizing a Method for the Quantification by Quantitative Real-Time Polymerase Chain Reaction of Host Cell DNA in Plasmid Vector Batches Used in Human Gene Therapy.

    Science.gov (United States)

    Ferro, Serge; Fabre, Isabelle; Chenivesse, Xavier

    2016-08-01

    Gene therapy products are very complex advanced therapy medicinal products produced using different processes that require many chemical and biological reagents and production intermediates, such as producing cells. The quantification of residual impurities in gene therapy vectors is a major quality control step when these vectors are used for therapeutic purposes, whether or not they are derived from viruses. Indeed, in nonviral gene therapy products, particularly plasmid vectors used to transfer genetic material, the presence of host-cell DNA (HCDNA) from the bacterial cells used for the vector production is an important concern because of the risk of immunogenicity and insertional mutagenesis. Several methods have been developed to quantify residual HCDNA, but real-time quantitative polymerase chain reaction (qPCR) seems to be most suitable because it allows detecting traces of "contaminating" DNA. The French National Agency for Medicines and Health Products Safety (ANSM) ensures the quality and safety of gene transfer medicinal products and must be able to quantify, in its own laboratories, the amount of HCDNA present in plasmid vector batches. Therefore, we developed and validated a qPCR method to quantify at the femtogram level the presence of Escherichia coli residual DNA in plasmid vectors. This approach uses the capillary-based LightCycler 1.5 System (Roche) with SYBR Green I, a primer pair against the E. coli 23S ribosomal RNA gene and different concentrations of a linearized plasmid that contains the 23S target sequence, as standard. This qPCR method is linear on an 8-decade logarithmic scale, accurate, reproducible, and sensitive (quantification of up to 10 copies of 23S target sequence per reaction, or 1.4 E. coli genome, or 7 fg of bacterial DNA). This technique allows ensuring that batches of plasmid vectors to be used in clinical trials comply with the specifications on HCDNA content.

  15. 基于实时竞价的网络广告投放流程设计%Design of Internet advertising process based on real-time bidding

    Institute of Scientific and Technical Information of China (English)

    肖鸿江; 孙国华

    2013-01-01

    Real-time bidding is a new procurement and delivery of online advertising technology.This paper analyzes the traditional advertising network paths,based on Internet,computer technology and auction theory,finds out the shortcomings,designs a Intemet advertising process based on real-time bidding.This can match the best advertising resources and goals,improve the utilization efficiency,save the costs,and achieve maximum benefit for the participants.%实时竞价是一种新兴的网络广告采购与投放技术,拥有着巨大的应用前景,本论文基于网络技术、计算机技术和拍卖机制理论,在分析传统网络广告投放路径的基础上,找出其不足,有针对性的设计了基于实时竞价的网络广告投放流程,该网络广告投放流程可以匹配最佳的广告资源与广告目标,提高广告资源利用效率,节约网络广告投放成本,实现网络广告的各个参与方效益最大化.

  16. SU-D-BRE-02: Development and Commissioning of A Gated Spot Scanning Proton Beam Therapy System with Real-Time Tumor-Tracking

    Energy Technology Data Exchange (ETDEWEB)

    Umegaki, K; Matsuura, T.; Takao, S.; Nihongi, H.; Yamada, T.; Miyamoto, N.; Shimizu, S.; Shirato, H. [Hokkaido University, Sapporo, Hokkaido (Japan); Matsuda, K.; Nakamura, F.; Umezawa, M.; Hiramoto, K. [Hitachi, Ltd., Chiyoda-ku, Tokyo (Japan)

    2014-06-01

    Purpose: A novel Proton Beam Therapy system has been developed by integrating Real-Time Tumor-Tracking (RTRT) and discrete spot scanning techniques. The system dedicated for spot scanning delivers significant advantages for both clinical and economical points of view. The system has the ability to control dose distribution with spot scanning beams and to gate the beams from the synchrotron to irradiate moving tumors only when the actual positions of them are within the planned position. Methods: The newly designed system consists of a synchrotron, beam transport systems, a compact and rotating gantry system with robotic couch and two orthogonal sets of X-ray fluoroscopes. The fully compact design of the system has been realized by reducing the maximum energy of the beam to 220MeV, corresponding to 30g/cm2 range and the number of circulating protons per synchrotron operation cycle, due to higher beam utilization efficiency in spot scanning. To improve the irradiation efficiency in the integration of RTRT and spot scanning, a new control system has been developed to enable multiple gated irradiation per operation cycle according to the gating signals. After the completion of the equipment installation, beam tests and commissioning has been successfully performed. Results: The basic performances and beam characteristics through the synchrotron accelerator to iso-center have been confirmed and the performance test of the irradiation nozzle and whole system has been appropriately completed. CBCT image has been checked and sufficient quality was obtained. RTRT system has been demonstrated and realized accurate dose distributions for moving targets. Conclusion: The gated spot scanning Proton Beam Therapy system with Real-Time Tumor-Tracking has been developed, successfully installed and tested. The new system enables us to deliver higher dose to the moving target tumors while sparing surrounding normal tissues and to realize the compact design of the system and facility

  17. Real time production optimization

    Energy Technology Data Exchange (ETDEWEB)

    Saputelli, Luigi; Otavio, Joao; Araujo, Turiassu; Escorcia, Alvaro [Halliburton, Houston, TX (United States). Landmark Division

    2004-07-01

    Production optimization encompasses various activities of measuring, analyzing, modeling, prioritizing and implementing actions to enhance productivity of a field. We present a state-of-the-art framework for optimizing production on a continuous basis as new sensor data is acquired in real time. Permanently acquired data is modeled and analyzed in order to create predictive models. A model based control strategy is used to regulate well and field instrumentation. The optimum field operating point, which changes with time, satisfies the maximum economic return. This work is a starting point for further development in automatic, intelligent reservoir technologies which get the most out of the abilities of permanent, instrumented wells and remotely activated downhole completions. The strategy, tested with history-matched data from a compartmentalised giant field, proved to reduce operating costs while increasing oil recovery by 27% in this field. (author)

  18. Real time production optimization

    Energy Technology Data Exchange (ETDEWEB)

    Saputelli, Luigi; Otavio, Joao; Araujo, Turiassu; Escorcia, Alvaro [Halliburton, Houston, TX (United States). Landmark Division

    2004-07-01

    Production optimization encompasses various activities of measuring, analyzing, modeling, prioritizing and implementing actions to enhance productivity of a field. We present a state-of-the-art framework for optimizing production on a continuous basis as new sensor data is acquired in real time. Permanently acquired data is modeled and analyzed in order to create predictive models. A model based control strategy is used to regulate well and field instrumentation. The optimum field operating point, which changes with time, satisfies the maximum economic return. This work is a starting point for further development in automatic, intelligent reservoir technologies which get the most out of the abilities of permanent, instrumented wells and remotely activated downhole completions. The strategy, tested with history-matched data from a compartmentalised giant field, proved to reduce operating costs while increasing oil recovery by 27% in this field. (author)

  19. Feasibility of interactive text message response (ITR) as a novel, real-time measure of adherence to antiretroviral therapy for HIV+ youth.

    Science.gov (United States)

    Dowshen, Nadia; Kuhns, Lisa M; Gray, Camdin; Lee, Susan; Garofalo, Robert

    2013-07-01

    Youth living with HIV/AIDS (YLH) face unique challenges to optimal adherence to antiretroviral therapy (ART). Accurate, real-time methods to assess adherence are needed to facilitate early intervention and promote viral suppression. The purpose of this study was to assess the feasibility and validity of interactive text message response (ITR) as a measure of adherence to ART among YLH. This study was part of a larger pilot text message reminder intervention conducted at a US community-based, LGBT-focused health center providing clinical services to YLH. Eligibility criteria for this pilot study included HIV-positive serostatus, aged 14-29, use of personal cell phone, English-speaking, and on ART with demonstrated adherence difficulties. During the 24-week study period, participants received personalized daily short message system reminders with a follow-up message 1 hour later asking whether they took medication and directing a response via return text message. To determine whether or not ITR would be a feasible, valid measure of adherence, we calculated the proportion of positive responses indicating medication had been taken divided by the total number of messages requesting a response and compared this response rate to a self-reported adherence measure, the visual analogue scale (VAS). Participants (n = 25) were on average 23 years old, largely male (92%), Black (60%) and behaviorally infected (84%). Over the course of the intervention, study participants responded to prompts via text to indicate whether or not they had taken their medication approximately 61% of the time. The overall mean ITR adherence rate (i.e., positive responses) was 57.4% (SD = 28.5%). ITR and VAS measures were moderately, positively correlated (r = 0.52, p < 0.05) during the first 6 weeks of the study period. ITR adherence rates were significantly higher on weekdays versus weekends (p < 0.05). This pilot study showed both moderate responsiveness of individuals to daily ITR and a moderate

  20. [Real-time monitoring in psychotherapy - methodology and casuistics].

    Science.gov (United States)

    Maurer, Gabriele; Aichhorn, Wolfgang; Leeb, Wilfried; Matschi, Brigitte; Schiepek, Günter

    2011-01-01

    Real-Time Monitoring in psychotherapy is a new method to increase quality and efficacy in psychotherapy. This internet-based information technology offers an online collection of psychotherapy-related data and allows insights into therapeutic patterns of change without any time-delay. The classical pre-post-evaluation is completed by an assessment of therapeutic processes. Besides an internet-based data collection the Synergetic Navigation System (SNS) integrates different methods of nonlinear time series analysis and provides a visualization of results. SNS is a new internet-based technology of data collection and data analysis. For illustration we present a single case study (avoidant personality disorder (DSM IV 301.82) with recurrent major depressive episodes) where SNS was applied in clinical practice (in-patient treatment). SNS results are used for therapy planning by repeated feedback interviews with the patients. Critical phases and nonlinearities of the ongoing self-organization processes can be identified. In addition to the practical impact of real-time monitoring SNS allows for continuous process-outcome-research in naturalistic settings. Models of change processes (e.g. sudden gains) can be tested but also used as a interpretation frame of idiographic results. In every day practice SNS enhances transparency, self-efficacy of patients, and supports the motivation to change. Compliance of patients is high, and the data show high validity. Therefore as a future perspective SNS should become routine in clinical practice and be integrated in professional psychotherapy training.

  1. Ovation Prime Real-Time

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Ovation Prime Real-Time (OPRT) product is a real-time forecast and nowcast model of auroral power and is an operational implementation of the work by Newell et...

  2. e-Monitoring of asthma therapy to improve compliance in children using a real-time medication monitoring system (RTMM): the e-MATIC study protocol.

    OpenAIRE

    Vasbinder, E.C.; Janssens, H.M.; Rutten-van Mölken, M.P.M.H.; Dijk, L. van; Winter, B.C.M. de; Groot, R.C.A. de; Vulto, A.G.; Bemt, P.M.L.A. van den

    2013-01-01

    Background Many children with asthma do not have sufficient asthma control, which leads to increased healthcare costs and productivity loss of parents. One of the causative factors are adherence problems. Effective interventions improving medication adherence may therefore improve asthma control and reduce costs. A promising solution is sending real time text-messages via the mobile phone network, when a medicine is about to be forgotten. As the effect of real time text-messages in children w...

  3. Optical coherence tomography for ultrahigh-resolution 3D imaging of cell development and real-time guiding for photodynamic therapy

    Science.gov (United States)

    Wang, Tianshi; Zhen, Jinggao; Wang, Bo; Xue, Ping

    2009-11-01

    Optical coherence tomography is a new emerging technique for cross-sectional imaging with high spatial resolution of micrometer scale. It enables in vivo and non-invasive imaging with no need to contact the sample and is widely used in biological and clinic application. In this paper optical coherence tomography is demonstrated for both biological and clinic applications. For biological application, a white-light interference microscope is developed for ultrahigh-resolution full-field optical coherence tomography (full-field OCT) to implement 3D imaging of biological tissue. Spatial resolution of 0.9μm×1.1μm (transverse×axial) is achieved A system sensitivity of 85 dB is obtained at an acquisition time of 5s per image. The development of a mouse embryo is studied layer by layer with our ultrahigh-resolution full-filed OCT. For clinic application, a handheld optical coherence tomography system is designed for real-time and in situ imaging of the port wine stains (PWS) patient and supplying surgery guidance for photodynamic therapy (PDT) treatment. The light source with center wavelength of 1310nm, -3 dB wavelength range of 90 nm and optical power of 9mw is utilized. Lateral resolution of 8 μm and axial resolution of 7μm at a rate of 2 frames per second and with 102dB sensitivity are achieved in biological tissue. It is shown that OCT images distinguish very well the normal and PWS tissues in clinic and are good to serve as a valuable diagnosis tool for PDT treatment.

  4. Prospective Qualitative and Quantitative Analysis of Real-Time Peer Review Quality Assurance Rounds Incorporating Direct Physical Examination for Head and Neck Cancer Radiation Therapy.

    Science.gov (United States)

    Cardenas, Carlos E; Mohamed, Abdallah S R; Tao, Randa; Wong, Andrew J R; Awan, Mussadiq J; Kuruvila, Shirly; Aristophanous, Michalis; Gunn, G Brandon; Phan, Jack; Beadle, Beth M; Frank, Steven J; Garden, Adam S; Morrison, William H; Fuller, Clifton D; Rosenthal, David I

    2017-07-01

    Our department has a long-established comprehensive quality assurance (QA) planning clinic for patients undergoing radiation therapy (RT) for head and neck cancer. Our aim is to assess the impact of a real-time peer review QA process on the quantitative and qualitative radiation therapy plan changes in the era of intensity modulated RT (IMRT). Prospective data for 85 patients undergoing head and neck IMRT who presented at a biweekly QA clinic after simulation and contouring were collected. A standard data collection form was used to document alterations made during this process. The original pre-QA clinical target volumes (CTVs) approved by the treating-attending physicians were saved before QA and compared with post-QA consensus CTVs. Qualitative assessment was done according to predefined criteria. Dice similarity coefficients (DSC) and other volume overlap metrics were calculated for each CTV level and were used for quantitative comparison. Changes are categorized as major, minor, and trivial according to the degree of overlap. Patterns of failure were analyzed and correlated to plan changes. All 85 patients were examined by at least 1 head and neck subspecialist radiation oncologist who was not the treating-attending physician; 80 (94%) were examined by ≥3 faculty members. New clinical findings on physical examination were found in 12 patients (14%) leading to major plan changes. Quantitative DSC analysis revealed significantly better agreement in CTV1 (0.94 ± 0.10) contours than in CTV2 (0.82 ± 0.25) and CTV3 (0.86 ± 0.2) contours (P=.0002 and P=.03, respectively; matched-pair Wilcoxon test). The experience of the treating-attending radiation oncologist significantly affected DSC values when all CTV levels were considered (P=.012; matched-pair Wilcoxon text). After a median follow-up time of 38 months, only 10 patients (12%) had local recurrence, regional recurrence, or both, mostly in central high-dose areas. Comprehensive peer review planning

  5. Visualization of Real-Time Data

    Science.gov (United States)

    Stansifer, Ryan; Engrand, Peter

    1996-01-01

    In this project we explored various approaches to presenting real-time data from the numerous systems monitored on the space shuttle to computer users. We examined the approach that several projects at the Kennedy Space Center (KSC) used to accomplish this. We undertook to build a prototype system to demonstrate that the Internet and the Java programming language could be used to present the real-time data conveniently. Several Java programs were developed that presented real-time data in different forms including one form that emulated the display screens of the PC GOAL system which is familiar to many at KSC. Also, we developed several communications programs to supply the data continuously. Furthermore, a framework was created using the World Wide Web (WWW) to organize the collection and presentation of the real-time data. We believe our demonstration project shows the great flexibility of the approach. We had no particular use of the data in mind, instead we wanted the most general and the least complex framework possible. People who wish to view data need only know how to use a WWW browser and the address (the URL). People wanting to build WWW documents containing real-time data need only know the values of a few parameters, they do not need to program in Java or any other language. These are stunning advantages over more monolithic systems.

  6. RSON: Offering QoS-Sensitive Service for Real-Time Applications on Internet by Overlay Technology%在Internet上利用重叠网技术为实时业务提供QoS

    Institute of Scientific and Technical Information of China (English)

    杨景; 孟晓烜

    2005-01-01

    提出并描述了一个实时业务重叠网系统(RSON).它由一组业务结点构成,这些结点分布在Internet上,并由业务链路连接起来,从而在现有的IP网络上形成一个虚拟的传输重叠网.RSON的最大特点在于,它不需要对现有的网络层协议做任何修改.为了能够为每条业务流提供所需的服务质量保证,RSON中每个业务结点都参与一个分布式重叠网业务路由协议(OSRP)以协同工作,它包括业务链路状态的测量、链路状态信息的分发、业务路径的选择和建立,以及相应的数据包交换模块.作为覆盖在现有底层网络上的虚拟传输网,RSON使得业务提供第三方能够在Internet公网上提供自己的增值业务,因此以IP语音通信为例说明如何利用RSON在Internet上提供增强的网络服务,并指出它的优点所在.%A real-time service overlay network (RSON) is presented in this paper. It can offer QoS(quality-of-service)-sensitive transport service on Internet to facilitate the newly emerged real-time multimedia applications. The RSON system consists of a collection of service nodes, deployed at various locations on Internet.These services nodes are connected together by service links, which corresponding to underlying IP paths, form an virtual transport network on top of existing network infrastructure. The most important feature of RSON is that, it requires no changes at the network layer and its business practice. To ensure the desired performance of every overlay service flows, the distributed service nodes in RSON all participate in an overlay service routing protocol (OSRP). The OSRP includes measurement of service links; link-states dissemination; path selection and setup; and an associated data forwarding module. As a virtual transport network over the underlying data networks, the RSON empowers the third party providers to offer value-added service on Internet to its customers. Using VoIP application as an example, we

  7. 基于互联网的盾构远程实时监控系统开发%Development of Internet-based Real-time Remote Monitoring System for Shield Machines

    Institute of Scientific and Technical Information of China (English)

    孟祥波; 徐受天; 马强

    2012-01-01

    为解决大型施工单位多台盾构同时施工时技术人员不足的困难,设计一套基于互联网的盾构远程实时监控系统,实现多台盾构集中监控、多用户访问和远程故障诊断等功能。分别从系统的结构、硬件和软件3个方面对系统进行研究,最终实现在任意互联网接入的地方通过安装客户端软件或者WEB浏览器方式访问多台盾构的目的。系统方便了技术人员远程协助,提高了管理效率,节约了管理成本。%An internet-based real-time remote monitoring system for shield machines is developed,which has such functions as centralized monitoring of multiple shield machines,multi-user access and remote fault diagnosis.The mentioning system is studied in terms of system structure,hardware and software.With the monitoring system,multiple shield machines can be accessed through installing client software or Web Browser at any place with Internet.The system is beneficial to perform remote assistance,improve the management efficiency and reduce the management cost.

  8. Research of Near Real Time Seismic Data Reception Technology Oriented to Multi- source on Internet%多源Internet准实时地震数据获取技术研究

    Institute of Scientific and Technical Information of China (English)

    商杰; 刘俊民; 许朝阳; 盖磊; 王晓明

    2011-01-01

    为了不断提高监测能力,禁核试北京国家数据中心需要增加从Internet上获取相关敏感地区的地震台站监测数据.提出并实现了一种多源数据获取方案.该方案通过以多种方式同时从Internet上不同的台网中心获取同一台站的准实时地震监测数据,在禁核试国家数据中心本地拼接、剔除冗余数据,保障数据的获取率和可靠性.%To improve the monitoring capability for some sensitive areas constantly, the CTBT Beijing national data center (NDC) needs to obtain more and more data of seismic stations via Internet. A multi - source data collection program pacakge is prensented. The prosram can fetch seismic monitoring data from different network centers or data sources nearly in real - time in different ways, and then sort data by time, discard the redundant and convert them to CSS format. With this program, NDC can reliably obtain monitoring data of some seismic stations in time.

  9. The myocardial ischemia evaluated by real-time contrast echocardiography may predict the response to cardiac resynchronization therapy: a large animal study.

    Directory of Open Access Journals (Sweden)

    Yongle Chen

    Full Text Available Evidence-based criteria for applying cardiac resynchronization therapy (CRT in patients with ischemic cardiomyopathy are still scarce. The aim of the present study was to evaluate the predictive value of real-time myocardial contrast echocardiography (RT-MCE in a preclinical canine model of ischemic cardiomyopathy who received CRT. Ischemic cardiomyopathy was produced by ligating the first diagonal branch in 20 beagles. Dogs were subsequently divided into two groups that were either treated with bi-ventricular pacing (CRT group or left untreated (control group. RT-MCE was performed at baseline, before CRT, and 4 weeks after CRT. Two-dimensional speckle tracking imaging was used to evaluate the standard deviation of circumferential (Cir12SD, radial (R12SD, and longitudinal (L12SD strains of left ventricular segments at basal as well as middle levels. Four weeks later, the Cir12SD, R12SD, and myocardial blood flow (MBF of the treated group were significantly improved compared to their non-CRT counterparts. Furthermore, MBF values measured before CRT were significantly higher in responders than in non-responders to bi-ventricular pacing. Meanwhile, no significant differences were observed between the responder and non-responder groups in terms of Cir12SD, R12SD, and L12SD. A high degree of correlation was found between MBF values before CRT and LVEF after CRT. When MBF value>24.9 dB/s was defined as a cut-off point before CRT, the sensitivity and specificity of RT-MCE in predicting the response to CRT were 83.3% and 100%, respectively. Besides, MBF values increased significantly in the CRT group compared with the control group after 4 weeks of pacing (49.8±15.5 dB/s vs. 28.5±4.6 dB/s, p<0.05. Therefore, we considered that myocardial perfusion may be superior to standard metrics of LV synchrony in selecting appropriate candidates for CRT. In addition, CRT can improve myocardial perfusion in addition to cardiac synchrony, especially in the setting

  10. Near Real-Time Assessment of Anatomic and Dosimetric Variations for Head and Neck Radiation Therapy via Graphics Processing Unit–based Dose Deformation Framework

    Energy Technology Data Exchange (ETDEWEB)

    Qi, X. Sharon, E-mail: xqi@mednet.ucla.edu [Department of Radiation Oncology, University of California Los Angeles, Los Angeles, California (United States); Santhanam, Anand; Neylon, John; Min, Yugang; Armstrong, Tess; Sheng, Ke [Department of Radiation Oncology, University of California Los Angeles, Los Angeles, California (United States); Staton, Robert J.; Pukala, Jason [Department of Radiation Oncology, UF Health Cancer Center - Orlando Health, Orlando, Florida (United States); Pham, Andrew; Low, Daniel A.; Lee, Steve P. [Department of Radiation Oncology, University of California Los Angeles, Los Angeles, California (United States); Steinberg, Michael; Manon, Rafael [Department of Radiation Oncology, UF Health Cancer Center - Orlando Health, Orlando, Florida (United States); Chen, Allen M.; Kupelian, Patrick [Department of Radiation Oncology, University of California Los Angeles, Los Angeles, California (United States)

    2015-06-01

    Purpose: The purpose of this study was to systematically monitor anatomic variations and their dosimetric consequences during intensity modulated radiation therapy (IMRT) for head and neck (H&N) cancer by using a graphics processing unit (GPU)-based deformable image registration (DIR) framework. Methods and Materials: Eleven IMRT H&N patients undergoing IMRT with daily megavoltage computed tomography (CT) and weekly kilovoltage CT (kVCT) scans were included in this analysis. Pretreatment kVCTs were automatically registered with their corresponding planning CTs through a GPU-based DIR framework. The deformation of each contoured structure in the H&N region was computed to account for nonrigid change in the patient setup. The Jacobian determinant of the planning target volumes and the surrounding critical structures were used to quantify anatomical volume changes. The actual delivered dose was calculated accounting for the organ deformation. The dose distribution uncertainties due to registration errors were estimated using a landmark-based gamma evaluation. Results: Dramatic interfractional anatomic changes were observed. During the treatment course of 6 to 7 weeks, the parotid gland volumes changed up to 34.7%, and the center-of-mass displacement of the 2 parotid glands varied in the range of 0.9 to 8.8 mm. For the primary treatment volume, the cumulative minimum and mean and equivalent uniform doses assessed by the weekly kVCTs were lower than the planned doses by up to 14.9% (P=.14), 2% (P=.39), and 7.3% (P=.05), respectively. The cumulative mean doses were significantly higher than the planned dose for the left parotid (P=.03) and right parotid glands (P=.006). The computation including DIR and dose accumulation was ultrafast (∼45 seconds) with registration accuracy at the subvoxel level. Conclusions: A systematic analysis of anatomic variations in the H&N region and their dosimetric consequences is critical in improving treatment efficacy. Nearly real-time

  11. Near Real-Time Assessment of Anatomic and Dosimetric Variations for Head and Neck Radiation Therapy via Graphics Processing Unit-based Dose Deformation Framework.

    Science.gov (United States)

    Qi, X Sharon; Santhanam, Anand; Neylon, John; Min, Yugang; Armstrong, Tess; Sheng, Ke; Staton, Robert J; Pukala, Jason; Pham, Andrew; Low, Daniel A; Lee, Steve P; Steinberg, Michael; Manon, Rafael; Chen, Allen M; Kupelian, Patrick

    2015-06-01

    The purpose of this study was to systematically monitor anatomic variations and their dosimetric consequences during intensity modulated radiation therapy (IMRT) for head and neck (H&N) cancer by using a graphics processing unit (GPU)-based deformable image registration (DIR) framework. Eleven IMRT H&N patients undergoing IMRT with daily megavoltage computed tomography (CT) and weekly kilovoltage CT (kVCT) scans were included in this analysis. Pretreatment kVCTs were automatically registered with their corresponding planning CTs through a GPU-based DIR framework. The deformation of each contoured structure in the H&N region was computed to account for nonrigid change in the patient setup. The Jacobian determinant of the planning target volumes and the surrounding critical structures were used to quantify anatomical volume changes. The actual delivered dose was calculated accounting for the organ deformation. The dose distribution uncertainties due to registration errors were estimated using a landmark-based gamma evaluation. Dramatic interfractional anatomic changes were observed. During the treatment course of 6 to 7 weeks, the parotid gland volumes changed up to 34.7%, and the center-of-mass displacement of the 2 parotid glands varied in the range of 0.9 to 8.8 mm. For the primary treatment volume, the cumulative minimum and mean and equivalent uniform doses assessed by the weekly kVCTs were lower than the planned doses by up to 14.9% (P=.14), 2% (P=.39), and 7.3% (P=.05), respectively. The cumulative mean doses were significantly higher than the planned dose for the left parotid (P=.03) and right parotid glands (P=.006). The computation including DIR and dose accumulation was ultrafast (∼45 seconds) with registration accuracy at the subvoxel level. A systematic analysis of anatomic variations in the H&N region and their dosimetric consequences is critical in improving treatment efficacy. Nearly real-time assessment of anatomic and dosimetric variations is

  12. Integration of a real-time tumor monitoring system into gated proton spot-scanning beam therapy: An initial phantom study using patient tumor trajectory data

    Energy Technology Data Exchange (ETDEWEB)

    Matsuura, Taeko; Miyamoto, Naoki; Takao, Seishin; Nihongi, Hideaki; Toramatsu, Chie; Sutherland, Kenneth; Suzuki, Ryusuke; Ishikawa, Masayori; Maeda, Kenichiro [Department of Medical Physics, Hokkaido University Graduate School of Medicine, Sapporo, Hokkaido, 060-8638 (Japan); Shimizu, Shinichi; Kinoshita, Rumiko; Umegaki, Kikuo; Shirato, Hiroki [Department of Radiation Medicine, Hokkaido University Graduate School of Medicine, Sapporo, Hokkaido, 060-8648 (Japan); Fujii, Yusuke; Umezawa, Masumi [Hitachi, Ltd., Hitachi Research Laboratory, 7-2-1 Omika-cho, Hitachi-shi, Ibaraki 319-1221 (Japan)

    2013-07-15

    Purpose: In spot-scanning proton therapy, the interplay effect between tumor motion and beam delivery leads to deterioration of the dose distribution. To mitigate the impact of tumor motion, gating in combination with repainting is one of the most promising methods that have been proposed. This study focused on a synchrotron-based spot-scanning proton therapy system integrated with real-time tumor monitoring. The authors investigated the effectiveness of gating in terms of both the delivered dose distribution and irradiation time by conducting simulations with patients' motion data. The clinically acceptable range of adjustable irradiation control parameters was explored. Also, the relation between the dose error and the characteristics of tumor motion was investigated.Methods: A simulation study was performed using a water phantom. A gated proton beam was irradiated to a clinical target volume (CTV) of 5 Multiplication-Sign 5 Multiplication-Sign 5 cm{sup 3}, in synchronization with lung cancer patients' tumor trajectory data. With varying parameters of gate width, spot spacing, and delivered dose per spot at one time, both dose uniformity and irradiation time were calculated for 397 tumor trajectory data from 78 patients. In addition, the authors placed an energy absorber upstream of the phantom and varied the thickness to examine the effect of changing the size of the Bragg peak and the number of required energy layers. The parameters with which 95% of the tumor trajectory data fulfill our defined criteria were accepted. Next, correlation coefficients were calculated between the maximum dose error and the tumor motion characteristics that were extracted from the tumor trajectory data.Results: With the assumed CTV, the largest percentage of the data fulfilled the criteria when the gate width was {+-}2 mm. Larger spot spacing was preferred because it increased the number of paintings. With a prescribed dose of 2 Gy, it was difficult to fulfill the

  13. Designing Real Time Assistive Technologies

    DEFF Research Database (Denmark)

    Sonne, Tobias; Obel, Carsten; Grønbæk, Kaj

    2015-01-01

    design criteria in relation to three core components (sensing, recognizing, and assisting) for designing real time assistive technologies for children with ADHD. Based on these design criteria, we designed the Child Activity Sensing and Training Tool (CASTT), a real time assistive prototype that captures...... activities and assists the child in maintaining attention. From a preliminary evaluation of CASTT with 20 children in several schools, we and found that: 1) it is possible to create a wearable sensor system for children with ADHD that monitors physical and physiological activities in real time; and that 2......) real time assistive technologies have potential to assist children with ADHD in regaining attention in critical school situations....

  14. Designing Real Time Assistive Technologies

    DEFF Research Database (Denmark)

    Sonne, Tobias; Obel, Carsten; Grønbæk, Kaj

    design criteria in relation to three core components (sensing, recognizing, and assisting) for designing real time assistive technologies for children with ADHD. Based on these design criteria, we designed the Child Activity Sensing and Training Tool (CASTT), a real time assistive prototype that captures...... activities and assists the child in maintaining attention. From a preliminary evaluation of CASTT with 20 children in several schools, we and found that: 1) it is possible to create a wearable sensor system for children with ADHD that monitors physical and physiological activities in real time; and that 2......) real time assistive technologies have potential to assist children with ADHD in regaining attention in critical school situations....

  15. Real-time volume graphics

    CERN Document Server

    Engel, Klaus; Kniss, Joe; Rezk-Salama, Christof; Weiskopf, Daniel

    2006-01-01

    Based on course notes of SIGGRAPH course teaching techniques for real-time rendering of volumetric data and effects; covers both applications in scientific visualization and real-time rendering. Starts with the basics (texture-based ray casting) and then improves and expands the algorithms incrementally. Book includes source code, algorithms, diagrams, and rendered graphics.

  16. A simulation study on the dosimetric benefit of real-time motion compensation in spot-scanning proton therapy for prostate.

    Science.gov (United States)

    Fujii, Yusuke; Matsuura, Taeko; Takao, Seishin; Matsuzaki, Yuka; Fujii, Takaaki; Miyamoto, Naoki; Umegaki, Kikuo; Nishioka, Kentaro; Shimizu, Shinichi; Shirato, Hiroki

    2017-07-01

    For proton spot scanning, use of a real-time-image gating technique incorporating an implanted marker and dual fluoroscopy facilitates mitigation of the dose distribution deterioration caused by interplay effects. This study explored the advantages of using a real-time-image gating technique, with a focus on prostate cancer. Two patient-positioning methods using fiducial markers were compared: (i) patient positioning only before beam delivery, and (ii) patient positioning both before and during beam delivery using a real-time-gating technique. For each scenario, dose distributions were simulated using the CT images of nine prostate cancer patients. Treatment plans were generated using a single-field proton beam with 3-mm and 6-mm lateral margins. During beam delivery, the prostate was assumed to move by 5 mm in four directions that were perpendicular to the beam direction at one of three separate timings (i.e. after the completion of the first, second and third quartiles of the total delivery of spot irradiation). Using a 3-mm margin and second quartile motion timing, the averaged values for ΔD99, ΔD95, ΔD5 and D5-95 were 5.1%, 3.3%, 3.6% and 9.0%, respectively, for Scenario (i) and 2.1%, 1.5%, 0.5% and 4.1%, respectively, for Scenario (ii). The margin expansion from 3 mm to 6 mm reduced the size of ΔD99, ΔD95, ΔD5 and D5-95 only with Scenario (i). These results indicate that patient positioning during beam delivery is an effective way to obtain better target coverage and uniformity while reducing the target margin when the prostate moves during irradiation. © The Author 2017. Published by Oxford University Press on behalf of The Japan Radiation Research Society and Japanese Society for Radiation Oncology.

  17. An algorithm for real-time dosimetry in intensity-modulated radiation therapy using the radioluminescence signal from Al2O3:C

    DEFF Research Database (Denmark)

    Andersen, C.E.; Marckmann, C.J.; Aznar, Marianne

    2006-01-01

    Although the radioluminescence (RL) signal from optical fibre Al2O3:C dosemeters used in medical applications is essentially proportional to dose rate, the crystals used so far are imperfect in the sense that their RL sensitivity changes with accumulated dose. A computational algorithm has been...... to the treatment planning system. RL signals from Al2O3:C can be used for real-time dose rate measurements with a time resolution of similar to 0.1 s and a spatial resolution only limited by the size of the detector (

  18. Real-time vision systems

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, R.; Hernandez, J.E.; Lu, Shin-yee [Lawrence Livermore National Lab., CA (United States)

    1994-11-15

    Many industrial and defence applications require an ability to make instantaneous decisions based on sensor input of a time varying process. Such systems are referred to as `real-time systems` because they process and act on data as it occurs in time. When a vision sensor is used in a real-time system, the processing demands can be quite substantial, with typical data rates of 10-20 million samples per second. A real-time Machine Vision Laboratory (MVL) was established in FY94 to extend our years of experience in developing computer vision algorithms to include the development and implementation of real-time vision systems. The laboratory is equipped with a variety of hardware components, including Datacube image acquisition and processing boards, a Sun workstation, and several different types of CCD cameras, including monochrome and color area cameras and analog and digital line-scan cameras. The equipment is reconfigurable for prototyping different applications. This facility has been used to support several programs at LLNL, including O Division`s Peacemaker and Deadeye Projects as well as the CRADA with the U.S. Textile Industry, CAFE (Computer Aided Fabric Inspection). To date, we have successfully demonstrated several real-time applications: bullet tracking, stereo tracking and ranging, and web inspection. This work has been documented in the ongoing development of a real-time software library.

  19. 实时响应物联网中基于查询的数据转发方案%Novel Query-Driven Real-Time Data Forwarding in Internet of Things

    Institute of Scientific and Technical Information of China (English)

    李英龙; 陈红; 莫尚丰

    2012-01-01

    In many sensor network technologies involved Internet of Things (IoT), users need quick query response, e. G. , the drivers driving on the road check the real-time parking information nearby in a IoTs of intelligent traffic system. Designing a fast data forwarding scheme for such kind of IoTs as well as meeting the requirements (e. G. , energy efficiency) of sensor networks is a crucial and challenging issue. Existing real-time routing protocols of sensor networks do not achieve the desired realtime goal because they suffer from the key problems of extra overhead of void forwarding paths (cannot reach the destination, but have to backtrack) and time overhead of processing isolated nodes, as well as difficult to adapt to the network topological changes. Therefore, a new query-driven data forwarding scheme is proposed in this paper, which every node gets its fastest data forwarding paths (directed acyclic graphs) based on the query message flooded by the Sink. Moreover, hybrid link cost model is given trying to achieve local energy balance and congestion avoidance, and finally the corresponding greedy distributed data forwarding algorithm and its improved one are provided. Extensive simulations show the effectiveness and efficiency of the proposed schemes and algorithms.%在许多基于传感器网络技术的物联网应用中,用户需要快速的查询响应,比如智能交通物联网应用中,行驶在路上的司机即时查询附近的空停车位信息.如何为此类物联网设计一种符合传感器网络特性(如能量有效等)的快速数据转发方案是一项重要的挑战性工作.已有的传感器网络实时数据转发协议大都因未解决好转发断路带来的额外开销、孤立节点处理耗时、难以适应网络拓扑动态变化等关键性问题而未取得理想的实时性效果.为此,该文提出一种新的基于查询的快速数据转发方案,利用查询消息为每个传感器节点建立最快速的数据转发路

  20. 制造物联网系统动力学建模与分析%System Dynamics for Internet-of-Things-based Real-Time Manufacture Systems

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    The performance of a manufacturing system is affected by various dynamic operational factors . Through appropriately designing the system structures and information sharing mechanisms , the system's o-verall performance can maintain a statistical optimal state in the presence of dynamics .System dynamics has been widely used for this purpose yet mainly focusing on structure design .With the possibility of real-time information capturing and transferring brought by Internet-of-Things ( IoT) technologies , to design an efficient IoT-based information sharing mechanism for a fixed-structure manufacturing system is regarded as an cost-efficient way to pursue high performance in a dynamical manufacturing environment .For this pur-pose a SD model is developed for a representative IoT-based manufacturing system .Apart from demonstra-ting the effectiveness of IoT on the system performance enhancement , return on investment analysis pro-vides a reasonable evaluation of the feasibility to invest IoT solution for a manufacturing system .%动态因素影响生产系统的运作表现,而相应的流程再造和信息共享机制使得充满动态性的生产系统达到统计学意义上的运作最优化。随着系统动力学广泛应用于系统结构和参数的控制与仿真,物联网技术为广泛、实时、精确采集生产系统的动态性提供了使能手段,使得系统动力学可以在实时信息环境下对生产系统的运作表现进行全面、敏捷、精确的仿真和分析,使得制造物联网系统的运作达到最优。本文采用系统动力学构建仿真模型,对比分析物联网技术应用前后的生产系统运作差异,并通过投资回报率分析不同方案的经济可行性,为企业决策提供参考依据。

  1. e-Monitoring of Asthma Therapy to Improve Compliance in children using a real-time medication monitoring system (RTMM): the e-MATIC study protocol.

    Science.gov (United States)

    Vasbinder, Erwin C; Janssens, Hettie M; Rutten-van Mölken, Maureen P M H; van Dijk, Liset; de Winter, Brenda C M; de Groot, Ruben C A; Vulto, Arnold G; van den Bemt, Patricia M L A

    2013-03-21

    Many children with asthma do not have sufficient asthma control, which leads to increased healthcare costs and productivity loss of parents. One of the causative factors are adherence problems. Effective interventions improving medication adherence may therefore improve asthma control and reduce costs. A promising solution is sending real time text-messages via the mobile phone network, when a medicine is about to be forgotten. As the effect of real time text-messages in children with asthma is unknown, the primary aim of this study is to determine the effect of a Real Time Medication Monitoring system (RTMM) with text-messages on adherence to inhaled corticosteroids (ICS). The secondary objective is to study the effects of RTMM on asthma control, quality of life and cost-effectiveness of treatment. A multicenter, randomized controlled trial involving 220 children (4-11 years) using ICS for asthma. All children receive an RTMM-device for one year, which registers time and date of ICS doses. Children in the intervention group also receive tailored text-messages, sent only when a dose is at risk of omission. Primary outcome measure is the proportion of ICS dosages taken within the individually predefined time-interval. Secondary outcome measures include asthma control (monthly Asthma Control Tests), asthma exacerbations, healthcare use (collected from hospital records, patient reports and pharmacy record data), and disease-specific quality of life (PAQLQ questionnaire). Parental and children's acceptance of RTMM is evaluated with online focus groups and patient questionnaires. An economic evaluation is performed adopting a societal perspective, including relevant healthcare costs and parental productivity loss. Furthermore, a decision-analytic model is developed in which different levels of adherence are associated with clinical and financial outcomes. Also, sensitivity analyses are carried out on different price levels for RTMM. If RTMM with tailored text

  2. Radioluminescence characterization of in situ x-ray nanodosimeters: Potential real-time monitors and modulators of external beam radiation therapy

    Energy Technology Data Exchange (ETDEWEB)

    Souris, Jeffrey S.; La Riviere, Patrick; Chen, Chin-Tu [Department of Radiology, The University of Chicago, Chicago, Illinois 60637 (United States); Cheng, Shih-Hsun; Chen, Nai-Tzu; Lo, Leu-Wei, E-mail: lwlo@nhri.org.tw [Department of Radiology, The University of Chicago, Chicago, Illinois 60637 (United States); Institute of Biomedical Engineering and Nanomedicine, National Health Research Institutes, Zhunan, Mioli 35053, Taiwan (China); Pelizzari, Charles [Deaprtment of Radiation and Cellular Oncology, The University of Chicago, Chicago, Illinois 60637 (United States)

    2014-11-17

    Europium-doped yttrium oxide (Y{sub 2}O{sub 3}:Eu) has garnered considerable interest recently for its use as a highly efficient, red phosphor in a variety of lighting applications that include fluorescent lamps, plasma, and field emission display panels, light emitting diodes (LEDs), and lasers. In the present work, we describe the development of Y{sub 2}O{sub 3}:Eu nanoparticles for a very different application: in situ, in vivo x-ray dosimetry. Spectroscopic analyses of these nanoparticles during x-ray irradiation reveal surprisingly bright and stable radioluminescence at near-infrared wavelengths, with markedly linear response to changes in x-ray flux and energy. Monte Carlo modeling of incident flux and broadband, wide-field imaging of mouse phantoms bearing both Y{sub 2}O{sub 3}:Eu nanoparticles and calibrated LEDs of similar spectral emission demonstrated significant transmission of radioluminescence, in agreement with spectroscopic studies; with approximately 15 visible photons being generated for every x-ray photon incident. Unlike the dosimeters currently employed in clinical practice, these nanodosimeters can sample both dose and dose rate rapidly enough as to provide real-time feedback for x-ray based external beam radiotherapy (EBRT). The technique's use of remote sensing and absence of supporting structures enable perturbation-free dosing of the targeted region and complete sampling from any direction. With the conjugation of pathology-targeting ligands onto their surfaces, these nanodosimeters offer a potential paradigm shift in the real-time monitoring and modulation of delivered dose in the EBRT of cancer in situ.

  3. Real-Time Monitoring of Psychotherapeutic Processes: Concept and Compliance

    Directory of Open Access Journals (Sweden)

    Guenter Karl Schiepek

    2016-05-01

    Full Text Available AbstractObjective. The feasibility of a high-frequency real-time monitoring approach to psychotherapy is outlined and tested for patients’ compliance to evaluate its integration to everyday practice. Criteria concern the ecological momentary assessment, the assessment of therapy-related cognitions and emotions, equidistant time sampling, real-time nonlinear time series analysis, continuous participative process control by client and therapist, and the application of idiographic (person-specific surveys. Methods. The process-outcome monitoring is technically realized by an internet-based device for data collection and data analysis, the Synergetic Navigation System. Its feasibility is documented by a compliance study on 151 clients treated in an inpatient and a day-treatment clinic. Results. We found high compliance rates (mean: 78.3%, median: 89.4% amongst the respondents, independent of the severity of symptoms or the degree of impairment. Compared to other diagnoses, the compliance rate was lower in the group diagnosed with personality disorders. Conclusion. The results support the feasibility of high-frequency monitoring in routine psychotherapy settings. Daily collection of psychological surveys allows for assessment of highly resolved, equidistant time series data which gives insight into the nonlinear qualities of therapeutic change processes (e.g., pattern transitions, critical instabilities.

  4. Real-Time Monitoring of Psychotherapeutic Processes: Concept and Compliance

    Science.gov (United States)

    Schiepek, Günter; Aichhorn, Wolfgang; Gruber, Martin; Strunk, Guido; Bachler, Egon; Aas, Benjamin

    2016-01-01

    Objective: The feasibility of a high-frequency real-time monitoring approach to psychotherapy is outlined and tested for patients' compliance to evaluate its integration to everyday practice. Criteria concern the ecological momentary assessment, the assessment of therapy-related cognitions and emotions, equidistant time sampling, real-time nonlinear time series analysis, continuous participative process control by client and therapist, and the application of idiographic (person-specific) surveys. Methods: The process-outcome monitoring is technically realized by an internet-based device for data collection and data analysis, the Synergetic Navigation System. Its feasibility is documented by a compliance study on 151 clients treated in an inpatient and a day-treatment clinic. Results: We found high compliance rates (mean: 78.3%, median: 89.4%) amongst the respondents, independent of the severity of symptoms or the degree of impairment. Compared to other diagnoses, the compliance rate was lower in the group diagnosed with personality disorders. Conclusion: The results support the feasibility of high-frequency monitoring in routine psychotherapy settings. Daily collection of psychological surveys allows for the assessment of highly resolved, equidistant time series data which gives insight into the nonlinear qualities of therapeutic change processes (e.g., pattern transitions, critical instabilities). PMID:27199837

  5. A Remote Real-Time Monitoring System for Power Quality

    Institute of Scientific and Technical Information of China (English)

    黄治清; 贺建闽

    2003-01-01

    An introduction is made to the composition, design method and engineering application of a remote real-time monitoring system of power quality in substations based on internet. With virtual instrument and network technique adopted, this system is characterized by good real-time property, high reliability, plentiful functions, and so on. It also can be used to monitor the load of a substation, such as electric locomotives.

  6. Evaluating real-time forecasts in real-time

    NARCIS (Netherlands)

    D.J.C. van Dijk (Dick); Ph.H.B.F. Franses (Philip Hans); F. Ravazzolo (Francesco)

    2007-01-01

    textabstractThe accuracy of real-time forecasts of macroeconomic variables that are subject to revisions may crucially depend on the choice of data used to compare the forecasts against. We put forward a flexible time-varying parameter regression framework to obtain early estimates of the final valu

  7. Towards Real-Time Argumentation

    Directory of Open Access Journals (Sweden)

    Vicente JULIÁN

    2016-07-01

    Full Text Available In this paper, we deal with the problem of real-time coordination with the more general approach of reaching real-time agreements in MAS. Concretely, this work proposes a real-time argumentation framework in an attempt to provide agents with the ability of engaging in argumentative dialogues and come with a solution for their underlying agreement process within a bounded period of time. The framework has been implemented and evaluated in the domain of a customer support application. Concretely, we consider a society of agents that act on behalf of a group of technicians that must solve problems in a Technology Management Centre (TMC within a bounded time. This centre controls every process implicated in the provision of technological and customer support services to private or public organisations by means of a call centre. The contract signed between the TCM and the customer establishes penalties if the specified time is exceeded.

  8. Recent achievements in real-time computational seismology in Taiwan

    Science.gov (United States)

    Lee, S.; Liang, W.; Huang, B.

    2012-12-01

    Real-time computational seismology is currently possible to be achieved which needs highly connection between seismic database and high performance computing. We have developed a real-time moment tensor monitoring system (RMT) by using continuous BATS records and moment tensor inversion (CMT) technique. The real-time online earthquake simulation service is also ready to open for researchers and public earthquake science education (ROS). Combine RMT with ROS, the earthquake report based on computational seismology can provide within 5 minutes after an earthquake occurred (RMT obtains point source information < 120 sec; ROS completes a 3D simulation < 3 minutes). All of these computational results are posted on the internet in real-time now. For more information, welcome to visit real-time computational seismology earthquake report webpage (RCS).

  9. Translating Neurocognitive Models of Auditory-Verbal Hallucinations into Therapy: Using Real-time fMRI-Neurofeedback to Treat Voices

    Science.gov (United States)

    Fovet, Thomas; Orlov, Natasza; Dyck, Miriam; Allen, Paul; Mathiak, Klaus; Jardri, Renaud

    2016-01-01

    Auditory-verbal hallucinations (AVHs) are frequent and disabling symptoms, which can be refractory to conventional psychopharmacological treatment in more than 25% of the cases. Recent advances in brain imaging allow for a better understanding of the neural underpinnings of AVHs. These findings strengthened transdiagnostic neurocognitive models that characterize these frequent and disabling experiences. At the same time, technical improvements in real-time functional magnetic resonance imaging (fMRI) enabled the development of innovative and non-invasive methods with the potential to relieve psychiatric symptoms, such as fMRI-based neurofeedback (fMRI-NF). During fMRI-NF, brain activity is measured and fed back in real time to the participant in order to help subjects to progressively achieve voluntary control over their own neural activity. Precisely defining the target brain area/network(s) appears critical in fMRI-NF protocols. After reviewing the available neurocognitive models for AVHs, we elaborate on how recent findings in the field may help to develop strong a priori strategies for fMRI-NF target localization. The first approach relies on imaging-based “trait markers” (i.e., persistent traits or vulnerability markers that can also be detected in the presymptomatic and remitted phases of AVHs). The goal of such strategies is to target areas that show aberrant activations during AVHs or are known to be involved in compensatory activation (or resilience processes). Brain regions, from which the NF signal is derived, can be based on structural MRI and neurocognitive knowledge, or functional MRI information collected during specific cognitive tasks. Because hallucinations are acute and intrusive symptoms, a second strategy focuses more on “state markers.” In this case, the signal of interest relies on fMRI capture of the neural networks exhibiting increased activity during AVHs occurrences, by means of multivariate pattern recognition methods. The fine

  10. Real Time Sonic Boom Display

    Science.gov (United States)

    Haering, Ed

    2014-01-01

    This presentation will provide general information about sonic boom mitigation technology to the public in order to supply information to potential partners and licensees. The technology is a combination of flight data, atmospheric data and terrain information implemented into a control room real time display for flight planning. This research is currently being performed and as such, any results and conclusions are ongoing.

  11. Real Time Conference 2016 Overview

    Science.gov (United States)

    Luchetta, Adriano

    2017-06-01

    This is a special issue of the IEEE Transactions on Nuclear Science containing papers from the invited, oral, and poster presentation of the 20th Real Time Conference (RT2016). The conference was held June 6-10, 2016, at Centro Congressi Padova “A. Luciani,” Padova, Italy, and was organized by Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA) and the Istituto Nazionale di Fisica Nucleare. The Real Time Conference is multidisciplinary and focuses on the latest developments in real-time techniques in high-energy physics, nuclear physics, astrophysics and astroparticle physics, nuclear fusion, medical physics, space instrumentation, nuclear power instrumentation, general radiation instrumentation, and real-time security and safety. Taking place every second year, it is sponsored by the Computer Application in Nuclear and Plasma Sciences technical committee of the IEEE Nuclear and Plasma Sciences Society. RT2016 attracted more than 240 registrants, with a large proportion of young researchers and engineers. It had an attendance of 67 students from many countries.

  12. Real time automatic scene classification

    NARCIS (Netherlands)

    Israël, Menno; Broek, van den Egon L.; Putten, van der Peter; Uyl, den Marten J.; Verbrugge, R.; Taatgen, N.; Schomaker, L.

    2004-01-01

    This work has been done as part of the EU VICAR (IST) project and the EU SCOFI project (IAP). The aim of the first project was to develop a real time video indexing classification annotation and retrieval system. For our systems, we have adapted the approach of Picard and Minka [3], who categorized

  13. Decentralized Real-Time Scheduling

    Science.gov (United States)

    1990-08-01

    917-932, August, 1987. [ Daniels 86] D. C. Daniels and H. F. Wedde. Real-Time Performance of a Completely Distributed Operating System. In Proceedings...imnmediate execuoon The schedule c.-eated by the SeltctPhaseProcfj procedure is an ordere-d lis t of mocl -phnise pairs, each placed according to the

  14. Real time automatic scene classification

    NARCIS (Netherlands)

    Verbrugge, R.; Israël, Menno; Taatgen, N.; van den Broek, Egon; van der Putten, Peter; Schomaker, L.; den Uyl, Marten J.

    2004-01-01

    This work has been done as part of the EU VICAR (IST) project and the EU SCOFI project (IAP). The aim of the first project was to develop a real time video indexing classification annotation and retrieval system. For our systems, we have adapted the approach of Picard and Minka [3], who categorized

  15. ISTTOK real-time architecture

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Ivo S., E-mail: ivoc@ipfn.ist.utl.pt; Duarte, Paulo; Fernandes, Horácio; Valcárcel, Daniel F.; Carvalho, Pedro J.; Silva, Carlos; Duarte, André S.; Neto, André; Sousa, Jorge; Batista, António J.N.; Hekkert, Tiago; Carvalho, Bernardo B.

    2014-03-15

    Highlights: • All real-time diagnostics and actuators were integrated in the same control platform. • A 100 μs control cycle was achieved under the MARTe framework. • Time-windows based control with several event-driven control strategies implemented. • AC discharges with exception handling on iron core flux saturation. • An HTML discharge configuration was developed for configuring the MARTe system. - Abstract: The ISTTOK tokamak was upgraded with a plasma control system based on the Advanced Telecommunications Computing Architecture (ATCA) standard. This control system was designed to improve the discharge stability and to extend the operational space to the alternate plasma current (AC) discharges as part of the ISTTOK scientific program. In order to accomplish these objectives all ISTTOK diagnostics and actuators relevant for real-time operation were integrated in the control system. The control system was programmed in C++ over the Multi-threaded Application Real-Time executor (MARTe) which provides, among other features, a real-time scheduler, an interrupt handler, an intercommunications interface between code blocks and a clearly bounded interface with the external devices. As a complement to the MARTe framework, the BaseLib2 library provides the foundations for the data, code introspection and also a Hypertext Transfer Protocol (HTTP) server service. Taking advantage of the modular nature of MARTe, the algorithms of each diagnostic data processing, discharge timing, context switch, control and actuators output reference generation, run on well-defined blocks of code named Generic Application Module (GAM). This approach allows reusability of the code, simplified simulation, replacement or editing without changing the remaining GAMs. The ISTTOK control system GAMs run sequentially each 100 μs cycle on an Intel{sup ®} Q8200 4-core processor running at 2.33 GHz located in the ATCA crate. Two boards (inside the ATCA crate) with 32 analog

  16. SU-E-J-182: Reproducibility of Tumor Motion Probability Distribution Function in Stereotactic Body Radiation Therapy of Lung Using Real-Time Tumor-Tracking Radiotherapy System

    Energy Technology Data Exchange (ETDEWEB)

    Shiinoki, T; Hanazawa, H; Park, S; Takahashi, T; Shibuya, K [Yamaguchi University, Ube, Yamaguchi (Japan); Kawamura, S; Uehara, T; Yuasa, Y; Koike, M [Yamaguchi University Hospital, Ube, Yamaguchi (Japan)

    2015-06-15

    Purpose: We aim to achieve new four-dimensional radiotherapy (4DRT) using the next generation real-time tumor-tracking (RTRT) system and flattening-filter-free techniques. To achieve new 4DRT, it is necessary to understand the respiratory motion of tumor. The purposes of this study were: 1.To develop the respiratory motion analysis tool using log files. 2.To evaluate the reproducibility of tumor motion probability distribution function (PDF) during stereotactic body RT (SBRT) of lung tumor. Methods: Seven patients having fiducial markers closely implanted to the lung tumor were enrolled in this study. The positions of fiducial markers were measured using the RTRT system (Mitsubishi Electronics Co., JP) and recorded as two types of log files during the course of SBRT. For each patients, tumor motion range and tumor motion PDFs in left-right (LR), anterior-posterior (AP) and superior-inferior (SI) directions were calculated using log files of all beams per fraction (PDFn). Fractional PDF reproducibility (Rn) was calculated as Kullback-Leibler (KL) divergence between PDF1 and PDFn of tumor motion. The mean of Rn (Rm) was calculated for each patient and correlated to the patient’s mean tumor motion range (Am). The change of Rm during the course of SBRT was also evluated. These analyses were performed using in-house developed software. Results: The Rm were 0.19 (0.07–0.30), 0.14 (0.07–0.32) and 0.16 (0.09–0.28) in LR, AP and SI directions, respectively. The Am were 5.11 mm (2.58–9.99 mm), 7.81 mm (2.87–15.57 mm) and 11.26 mm (3.80–21.27 mm) in LR, AP and SI directions, respectively. The PDF reproducibility decreased as the tumor motion range increased in AP and SI direction. That decreased slightly through the course of RT in SI direction. Conclusion: We developed the respiratory motion analysis tool for 4DRT using log files and quantified the range and reproducibility of respiratory motion for lung tumors.

  17. Radiation damping in real time.

    Science.gov (United States)

    Mendes, A C; Takakura, F I

    2001-11-01

    We study the nonequilibrium dynamics of a charge interacting with its own radiation, which originates the radiation damping. The real-time equation of motion for the charge and the associated Langevin equation is found in classical limit. The equation of motion for the charge allows one to obtain the frequency-dependent coefficient of friction. In the lowest order we find that although the coefficient of static friction vanishes, there is dynamical dissipation represented by a non-Markovian dissipative kernel.

  18. The VLT Real Time Display

    Science.gov (United States)

    Herlin, T.; Brighton, A.; Biereichel, P.

    The VLT Real-Time Display (RTD) software was developed in order to support image display in real-time, providing a tool for users to display video like images from a camera or detector as fast as possible on an X-Server. The RTD software is implemented as a package providing a Tcl/Tk image widget written in C++ and an independent image handling library and can be used as a building block, adding display capabilities to dedicated VLT control applications. The RTD widget provides basic image display functionality like: panning, zooming, color scaling, colormaps, intensity changes, pixel query, overlaying of line graphics. A large set of assisting widgets, e.g., colorbar, zoom window, spectrum plot are provided to enable the building of image applications. The support for real-time is provided by an RTD image event mechanism used for camera or detector subsystems to pass images to the RTD widget. Image data are passed efficiently via shared memory. This paper describes the architecture of the RTD software and summarizes the features provided by RTD.

  19. Real-time, face recognition technology

    Energy Technology Data Exchange (ETDEWEB)

    Brady, S.

    1995-11-01

    The Institute for Scientific Computing Research (ISCR) at Lawrence Livermore National Laboratory recently developed the real-time, face recognition technology KEN. KEN uses novel imaging devices such as silicon retinas developed at Caltech or off-the-shelf CCD cameras to acquire images of a face and to compare them to a database of known faces in a robust fashion. The KEN-Online project makes that recognition technology accessible through the World Wide Web (WWW), an internet service that has recently seen explosive growth. A WWW client can submit face images, add them to the database of known faces and submit other pictures that the system tries to recognize. KEN-Online serves to evaluate the recognition technology and grow a large face database. KEN-Online includes the use of public domain tools such as mSQL for its name-database and perl scripts to assist the uploading of images.

  20. Real time water chemistry monitoring and diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Gaudreau, T.M.; Choi, S.S. [EPRIsolutions, Palo Alto, CA (United States)

    2002-07-01

    EPRI has produced a real time water chemistry monitoring and diagnostic system. This system is called SMART ChemWorks and is based on the EPRI ChemWorks codes. System models, chemistry parameter relationships and diagnostic approaches from these codes are integrated with real time data collection, an intelligence engine and Internet technologies to allow for automated analysis of system chemistry. Significant data management capabilities are also included which allow the user to evaluate data and create automated reporting. Additional features have been added to the system in recent years including tracking and evaluation of primary chemistry as well as the calculation and tracking of primary to secondary leakage in PWRs. This system performs virtual sensing, identifies normal and upset conditions, and evaluates the consistency of on-line monitor and grab sample readings. The system also makes use of virtual fingerprinting to identify the cause of any chemistry upsets. This technology employs plant-specific data and models to determine the chemical state of the steam cycle. (authors)

  1. Integrated real-time roof monitoring

    Institute of Scientific and Technical Information of China (English)

    SHEN Bao-tang; GUO Hua; KING Andrew

    2009-01-01

    CSIRO has recently developed a real-time roof monitoring system for under-ground coal mines and successfully tried the system in gate roads at Ulan Mine. The sys-tem integrated displacement monitoring, stress monitoring and seismic monitoring in one package. It included GEL multianchor extensometers, vibrating wire uniaxial stress meters, ESG seismic monitoring system with microseismic sensors and high-frequency AE sen-sors. The monitoring system automated and the data can be automatically collected by a central computer located in an underground nonhazardous area. The data are then trans-ferred to the surface via an optical fiber cable. The real-time data were accessed at any location with an Internet connection. The trials of the system in two tailgates at Ulan Mine demonstrate that the system is effective for monitoring the behavior and stability of read-ways during Iongwall mining. The continuous roof displacement/stress data show clear precursors of roof falls. The seismic data (event count and locations) provide insights into the roof failure process during roof fall.

  2. Cognitive behavior therapy with Internet addicts: treatment outcomes and implications.

    Science.gov (United States)

    Young, Kimberly S

    2007-10-01

    Research over the last decade has identified Internet addiction as a new and often unrecognized clinical disorder that impact a user's ability to control online use to the extent that it can cause relational, occupational, and social problems. While much of the literature explores the psychological and social factors underlying Internet addiction, little if any empirical evidence exists that examines specific treatment outcomes to deal with this new client population. Researchers have suggested using cognitive behavioral therapy (CBT) as the treatment of choice for Internet addiction, and addiction recovery in general has utilized CBT as part of treatment planning. To investigate the efficacy of using CBT with Internet addicts, this study investigated 114 clients who suffered from Internet addiction and received CBT at the Center for Online Addiction. This study employed a survey research design, and outcome variables such as client motivation, online time management, improved social relationships, improved sexual functioning, engagement in offline activities, and ability to abstain from problematic applications were evaluated on the 3rd, 8th, and 12th sessions and over a 6-month follow-up. Results suggested that Caucasian, middle-aged males with at least a 4-year degree were most likely to suffer from some form of Internet addiction. Preliminary analyses indicated that most clients were able to manage their presenting complaints by the eighth session, and symptom management was sustained upon a 6-month follow-up. As the field of Internet addiction continues to grow, such outcome data will be useful in treatment planning with evidenced-based protocols unique to this emergent client population.

  3. Real-Time Ocean Data in the Classroom

    Science.gov (United States)

    Murray, Laura; Gibson, Deidre; Ward, Angela

    2008-01-01

    To apply students' savvy internet skills in the science classroom--as well as capture their interest in science and investigation, and provide opportunities for authentic research--introduce them to real-time data from ocean-observing systems. Students can use data from these ocean-observing systems to discover the winds and waves from storms or…

  4. Phase-Transition Nanodroplets for Real-Time Photoacoustic/Ultrasound Dual-Modality Imaging and Photothermal Therapy of Sentinel Lymph Node in Breast Cancer

    Science.gov (United States)

    Yang, Lu; Cheng, Juan; Chen, Yuli; Yu, Shengjie; Liu, Fengqiu; Sun, Yang; Chen, Yu; Ran, Haitao

    2017-01-01

    Pathological status of lymph nodes (LNs) plays a critical role in staging and treatment for the patients with breast cancer. Sentinel lymph node biopsy has become the standard method in determining pathological status of axillary LNs. Therefore, the determination of sentinel lymph nodes (SLNs) and therapy of metastatic LNs are highly desirable in clinic. Herein, an unprecedented carbon nanoparticles (CNs)-incorporated liquid-gas phase-transition nanodroplets (CNPs) with strong near-infrared (NIR) absorption, good biocompatibility, excellent photoacoustic (PA) and ultrasound (US) contrast, and high photothermal-conversion efficiency are reported in this study. Upon laser irradiation, liquid-gas phase transition of the CNPs has been demonstrated to provide excellent contrasts for PA/US dual-modality imaging both in vitro and in vivo. Additionally, the CNPs are capable of staining lymph nodes, which can contribute significantly to the identification of LNs with naked eyes. With increased laser energy, the CNPs exhibit the high performance in killing the breast cancer cells both in vitro and in vivo, due to the photothermal effect induced from the CNs within CNPs. These results suggest that the developed multifunctional phase-transition nanodroplets have high potential to act as the theranostic agents in both SLNs detection and therapy of metastatic LNs. PMID:28338071

  5. Adaptive Thermal Therapy using Planar Ultrasound Transducers with Real-time MR Temperature Feedback: Demonstration in Gel Phantoms and Ex-vivo Tissues

    Science.gov (United States)

    Tang, Kee; Choy, Vanessa; Chopra, Rajiv; Bronskill, Michael

    2007-05-01

    MRI-guided transurethral ultrasound therapy offers a minimally invasive approach for the treatment of localized prostate cancer. The main goal of this study was to evaluate active temperature feedback on a clinical 1.5T MR imager to control conformal thermal therapy. MR thermometry was performed during heating in both thermal gel phantoms and ex-vivo tissue with a single-element transurethral heating applicator. The applicator rotation rate and power were controlled based on MRI-temperature measurements. The influence of a cooling gradient (to simulate cooling of the rectum or urethra) was also investigated in gel phantoms. The 55°C isotherm generated during heating closely matched the targeted prostate shape, with an average distance error of 0.9 mm ± 0.4 mm in turkey breasts, 1.3 mm ± 0.5 mm in gel phantoms without rectal cooling and 1.4 mm ± 0.6 mm in gel phantoms with rectal cooling. Accurate, MRI-guided, active feedback has been successfully demonstrated experimentally and has the capability to adjust for unpredictable and varying tissue properties during the treatment.

  6. Real-time flutter analysis

    Science.gov (United States)

    Walker, R.; Gupta, N.

    1984-01-01

    The important algorithm issues necessary to achieve a real time flutter monitoring system; namely, the guidelines for choosing appropriate model forms, reduction of the parameter convergence transient, handling multiple modes, the effect of over parameterization, and estimate accuracy predictions, both online and for experiment design are addressed. An approach for efficiently computing continuous-time flutter parameter Cramer-Rao estimate error bounds were developed. This enables a convincing comparison of theoretical and simulation results, as well as offline studies in preparation for a flight test. Theoretical predictions, simulation and flight test results from the NASA Drones for Aerodynamic and Structural Test (DAST) Program are compared.

  7. Smartphone applications for immersive virtual reality therapy for internet addiction and internet gaming disorder.

    Science.gov (United States)

    Zhang, Melvyn W B; Ho, Roger C M

    2017-01-01

    There have been rapid advances in technologies over the past decade and virtual reality technology is an area which is increasingly utilized as a healthcare intervention in many disciplines including that of Medicine, Surgery and Psychiatry. In Psychiatry, most of the current interventions involving the usage of virtual reality technology is limited to its application for anxiety disorders. With the advances in technology, Internet addiction and Internet gaming disorders are increasingly prevalent. To date, these disorders are still being treated using conventional psychotherapy methods such as cognitive behavioural therapy. However, there is an increasing number of research combining various other therapies alongside with cognitive behavioural therapy, as an attempt possibly to reduce the drop-out rates and to make such interventions more relevant to the targeted group of addicts, who are mostly adolescents. To date, there has been a prior study done in Korea that has demonstrated the comparable efficacy of virtual reality therapy with that of cognitive behavioural therapy. However, the intervention requires the usage of specialized screens and devices. It is thus the objective of the current article to highlight how smartphone applications could be designed and be utilized for immersive virtual reality treatment, alongside low cost wearables.

  8. Real-Time Pretreatment Review Limits Unacceptable Deviations on a Cooperative Group Radiation Therapy Technique Trial: Quality Assurance Results of RTOG 0933

    Energy Technology Data Exchange (ETDEWEB)

    Gondi, Vinai, E-mail: vgondi@chicagocancer.org [Cadence Brain Tumor Center and CDH Proton Center, Warrenville, Illinois (United States); University of Wisconsin School of Medicine & Public Health, Madison, Wisconsin (United States); Cui, Yunfeng [Duke University School of Medicine, Durham, North Carolina (United States); Mehta, Minesh P. [University of Maryland School of Medicine, Baltimore, Maryland (United States); Manfredi, Denise [Radiation Therapy Oncology Group—RTQA, Philadelphia, Pennsylvania (United States); Xiao, Ying; Galvin, James M. [Thomas Jefferson University Hospital, Philadelphia, Pennsylvania (United States); Rowley, Howard [University of Wisconsin School of Medicine & Public Health, Madison, Wisconsin (United States); Tome, Wolfgang A. [Montefiore Medical Center and Institute for Onco-Physics, Albert Einstein College of Medicine of Yeshiva University, Bronx, New York (United States)

    2015-03-01

    Purpose: RTOG 0933 was a phase II trial of hippocampal avoidance during whole brain radiation therapy for patients with brain metastases. The results demonstrated improvement in short-term memory decline, as compared with historical control individuals, and preservation of quality of life. Integral to the conduct of this trial were quality assurance processes inclusive of pre-enrollment credentialing and pretreatment centralized review of enrolled patients. Methods and Materials: Before enrolling patients, all treating physicians and sites were required to successfully complete a “dry-run” credentialing test. The treating physicians were credentialed based on accuracy of magnetic resonance imaging–computed tomography image fusion and hippocampal and normal tissue contouring, and the sites were credentialed based on protocol-specified dosimetric criteria. Using the same criteria, pretreatment centralized review of enrolled patients was conducted. Physicians enrolling 3 consecutive patients without unacceptable deviations were permitted to enroll further patients without pretreatment review, although their cases were reviewed after treatment. Results: In all, 113 physicians and 84 sites were credentialed. Eight physicians (6.8%) failed hippocampal contouring on the first attempt; 3 were approved on the second attempt. Eight sites (9.5%) failed intensity modulated radiation therapy planning on the first attempt; all were approved on the second attempt. One hundred thirteen patients were enrolled in RTOG 0933; 100 were analyzable. Eighty-seven cases were reviewed before treatment; 5 (5.7%) violated the eligibility criteria, and 21 (24%) had unacceptable deviations. With feedback, 18 cases were approved on the second attempt and 2 cases on the third attempt. One patient was treated off protocol. Twenty-two cases were reviewed after treatment; 1 (4.5%) violated the eligibility criteria, and 5 (23%) had unacceptable deviations. Conclusions: Although >95% of the

  9. Real time analysis under EDS

    Energy Technology Data Exchange (ETDEWEB)

    Schneberk, D.

    1985-07-01

    This paper describes the analysis component of the Enrichment Diagnostic System (EDS) developed for the Atomic Vapor Laser Isotope Separation Program (AVLIS) at Lawrence Livermore National Laboratory (LLNL). Four different types of analysis are performed on data acquired through EDS: (1) absorption spectroscopy on laser-generated spectral lines, (2) mass spectrometer analysis, (3) general purpose waveform analysis, and (4) separation performance calculations. The information produced from this data includes: measures of particle density and velocity, partial pressures of residual gases, and overall measures of isotope enrichment. The analysis component supports a variety of real-time modeling tasks, a means for broadcasting data to other nodes, and a great degree of flexibility for tailoring computations to the exact needs of the process. A particular data base structure and program flow is common to all types of analysis. Key elements of the analysis component are: (1) a fast access data base which can configure all types of analysis, (2) a selected set of analysis routines, (3) a general purpose data manipulation and graphics package for the results of real time analysis. Each of these components are described with an emphasis upon how each contributes to overall system capability. 3 figs.

  10. Real-time analysis keratometer

    Science.gov (United States)

    Adachi, Iwao P. (Inventor); Adachi, Yoshifumi (Inventor); Frazer, Robert E. (Inventor)

    1987-01-01

    A computer assisted keratometer in which a fiducial line pattern reticle illuminated by CW or pulsed laser light is projected on a corneal surface through lenses, a prismoidal beamsplitter quarterwave plate, and objective optics. The reticle surface is curved as a conjugate of an ideal corneal curvature. The fiducial image reflected from the cornea undergoes a polarization shift through the quarterwave plate and beamsplitter whereby the projected and reflected beams are separated and directed orthogonally. The reflected beam fiducial pattern forms a moire pattern with a replica of the first recticle. This moire pattern contains transverse aberration due to differences in curvature between the cornea and the ideal corneal curvature. The moire pattern is analyzed in real time by computer which displays either the CW moire pattern or a pulsed mode analysis of the transverse aberration of the cornea under observation, in real time. With the eye focused on a plurality of fixation points in succession, a survey of the entire corneal topography is made and a contour map or three dimensional plot of the cornea can be made as a computer readout in addition to corneal radius and refractive power analysis.

  11. The improved broadband Real-Time Seismic Network in Romania

    Science.gov (United States)

    Neagoe, C.; Ionescu, C.

    2009-04-01

    Starting with 2002 the National Institute for Earth Physics (NIEP) has developed its real-time digital seismic network. This network consists of 96 seismic stations of which 48 broad band and short period stations and two seismic arrays are transmitted in real-time. The real time seismic stations are equipped with Quanterra Q330 and K2 digitizers, broadband seismometers (STS2, CMG40T, CMG 3ESP, CMG3T) and strong motions sensors Kinemetrics episensors (+/- 2g). SeedLink and AntelopeTM (installed on MARMOT) program packages are used for real-time (RT) data acquisition and exchange. The communication from digital seismic stations to the National Data Center in Bucharest is assured by 5 providers (GPRS, VPN, satellite communication, radio lease line and internet), which will assure the back-up communications lines. The processing centre runs BRTT's AntelopeTM 4.10 data acquisition and processing software on 2 workstations for real-time processing and post processing. The Antelope Real-Time System is also providing automatic event detection, arrival picking, event location and magnitude calculation. It provides graphical display and reporting within near-real-time after a local or regional event occurred. Also at the data center was implemented a system to collect macroseismic information using the internet on which macro seismic intensity maps are generated. In the near future at the data center will be install Seiscomp 3 data acquisition processing software on a workstation. The software will run in parallel with Antelope software as a back-up. The present network will be expanded in the near future. In the first half of 2009 NIEP will install 8 additional broad band stations in Romanian territory, which also will be transmitted to the data center in real time. The Romanian Seismic Network is permanently exchanging real -time waveform data with IRIS, ORFEUS and different European countries through internet. In Romania, magnitude and location of an earthquake are now

  12. Real-time fast inverse dose optimization for image guided adaptive radiation therapy-Enhancements to fast inverse dose optimization (FIDO)

    Science.gov (United States)

    Goldman, S. P.; Turnbull, D.; Johnson, C.; Chen, J. Z.; Battista, J. J.

    2009-05-01

    A fast, accurate and stable optimization algorithm is very important for inverse planning of intensity-modulated radiation therapy (IMRT), and for implementing dose-adaptive radiotherapy in the future. Conventional numerical search algorithms with positive beam weight constraints generally require numerous iterations and may produce suboptimal dose results due to trapping in local minima regions of the objective function landscape. A direct solution of the inverse problem using conventional quadratic objective functions without positive beam constraints is more efficient but it will result in unrealistic negative beam weights. We review here a direct solution of the inverse problem that is efficient and does not yield unphysical negative beam weights. In fast inverse dose optimization (FIDO) method the objective function for the optimization of a large number of beamlets is reformulated such that the optimization problem is reducible to a linear set of equations. The optimal set of intensities is then found through a matrix inversion, and negative beamlet intensities are avoided without the need for externally imposed ad hoc conditions. In its original version [S. P. Goldman, J. Z. Chen, and J. J. Battista, in Proceedings of the XIVth International Conference on the Use of Computers in Radiation Therapy, 2004, pp. 112-115; S. P. Goldman, J. Z. Chen, and J. J. Battista, Med. Phys. 32, 3007 (2005)], FIDO was tested on single two-dimensional computed tomography (CT) slices with sharp KERMA beams without scatter, in order to establish a proof of concept which demonstrated that FIDO could be a viable method for the optimization of cancer treatment plans. In this paper we introduce the latest advancements in FIDO that now include not only its application to three-dimensional volumes irradiated by beams with full scatter but include as well a complete implementation of clinical dose-volume constraints including maximum and minimum dose as well as equivalent uniform dose

  13. Autonomous Real Time Requirements Tracing

    Science.gov (United States)

    Plattsmier, George; Stetson, Howard

    2014-01-01

    One of the more challenging aspects of software development is the ability to verify and validate the functional software requirements dictated by the Software Requirements Specification (SRS) and the Software Detail Design (SDD). Insuring the software has achieved the intended requirements is the responsibility of the Software Quality team and the Software Test team. The utilization of Timeliner-TLX(sup TM) Auto- Procedures for relocating ground operations positions to ISS automated on-board operations has begun the transition that would be required for manned deep space missions with minimal crew requirements. This transition also moves the auto-procedures from the procedure realm into the flight software arena and as such the operational requirements and testing will be more structured and rigorous. The autoprocedures would be required to meet NASA software standards as specified in the Software Safety Standard (NASASTD- 8719), the Software Engineering Requirements (NPR 7150), the Software Assurance Standard (NASA-STD-8739) and also the Human Rating Requirements (NPR-8705). The Autonomous Fluid Transfer System (AFTS) test-bed utilizes the Timeliner-TLX(sup TM) Language for development of autonomous command and control software. The Timeliner-TLX(sup TM) system has the unique feature of providing the current line of the statement in execution during real-time execution of the software. The feature of execution line number internal reporting unlocks the capability of monitoring the execution autonomously by use of a companion Timeliner-TLX(sup TM) sequence as the line number reporting is embedded inside the Timeliner-TLX(sup TM) execution engine. This negates I/O processing of this type data as the line number status of executing sequences is built-in as a function reference. This paper will outline the design and capabilities of the AFTS Autonomous Requirements Tracker, which traces and logs SRS requirements as they are being met during real-time execution of the

  14. Real-time flood forecasting

    Science.gov (United States)

    Lai, C.; Tsay, T.-K.; Chien, C.-H.; Wu, I.-L.

    2009-01-01

    Researchers at the Hydroinformatic Research and Development Team (HIRDT) of the National Taiwan University undertook a project to create a real time flood forecasting model, with an aim to predict the current in the Tamsui River Basin. The model was designed based on deterministic approach with mathematic modeling of complex phenomenon, and specific parameter values operated to produce a discrete result. The project also devised a rainfall-stage model that relates the rate of rainfall upland directly to the change of the state of river, and is further related to another typhoon-rainfall model. The geographic information system (GIS) data, based on precise contour model of the terrain, estimate the regions that were perilous to flooding. The HIRDT, in response to the project's progress, also devoted their application of a deterministic model to unsteady flow of thermodynamics to help predict river authorities issue timely warnings and take other emergency measures.

  15. REAL TIME DATA PROCESSING FRAMEWORKS

    Directory of Open Access Journals (Sweden)

    Yash Sakaria

    2015-09-01

    Full Text Available On a business level, everyone wants to get hold of the business value and other organizational advantages that big data has to offer. Analytics has arisen as the primitive path to business value from big data. Hadoop is not just a storage platform for big data; it’s also a computational and processing platform for business analytics. Hadoop is, however, unsuccessful in fulfilling business requirements when it comes to live data streaming. The initial architecture of Apache Hadoop did not solve the problem of live stream data mining. In summary, the traditional approach of big data being co-relational to Hadoop is false; focus needs to be given on business value as well. Data Warehousing, Hadoop and stream processing complement each other very well. In this paper, we have tried reviewing a few frameworks and products which use real time data streaming by providing modifications to Hadoop.

  16. Integration of Real-Time Data Into Building Automation Systems

    Energy Technology Data Exchange (ETDEWEB)

    Mark J. Stunder; Perry Sebastian; Brenda A. Chube; Michael D. Koontz

    2003-04-16

    The project goal was to investigate the possibility of using predictive real-time information from the Internet as an input to building management system algorithms. The objectives were to identify the types of information most valuable to commercial and residential building owners, managers, and system designers. To comprehensively investigate and document currently available electronic real-time information suitable for use in building management systems. Verify the reliability of the information and recommend accreditation methods for data and providers. Assess methodologies to automatically retrieve and utilize the information. Characterize equipment required to implement automated integration. Demonstrate the feasibility and benefits of using the information in building management systems. Identify evolutionary control strategies.

  17. Real-Time Control of Embedded Device Based on Private IP Address in Internet%私有IP地址环境中的嵌入式设备实时控制技术研究

    Institute of Scientific and Technical Information of China (English)

    兰勇; 张博

    2011-01-01

    Aiming at the inconsistency between rapid increase of device join to Internet for communication and the shortage of IP addresses in Internet, a remote control method of embedded device based on private IP address in Internet is proposed. The structure of the control system based on client/server is given for embedded device, which could be online by technology of connection oriented. The application results show that this control method has perfect performances, such as high reliability, plug and play, extended functions, etc. Furthermore, this method can provide technical support during the design and building Internet of things.%针对Intemet数据通信所面临的设备公有IP地址匮乏的事实,设计了一种基于私有IP地址的嵌入式设备接入Intemet实施远程控制的技术.通过构建基于客户/服务器的集中式控制体系结构,实现了嵌入式设备面向连接的实时在线技术,从而实现了基于Intemet的实时控制.实际应用验证该技术具有实时性强、即插即用和设备扩展性好等特性.该技术同时为基于Internet构建物联网提供了良好的技术支持.

  18. Clinical virology in real time.

    Science.gov (United States)

    Niesters, Hubert G M

    2002-12-01

    The ability to detect nucleic acids has had and still has a major impact on diagnostics in clinical virology. Both quantitative and qualitative techniques, whether signal or target amplification based systems, are currently used routinely in most if not all virology laboratories. Technological improvements, from automated sample isolation to real time amplification technology, have given the ability to develop and introduce systems for most viruses of clinical interest, and to obtain clinical relevant information needed for optimal antiviral treatment options. Both polymerase chain reaction (PCR) and nucleic acid sequence-based amplification (NASBA) can currently be used together with real time detection to generate results in a short turn-around time and to determine whether variants relevant for antiviral resistance are present. These new technologies enable the introduction of an individual patient disease management concept. Within our clinical setting, we have introduced this e.g. for quantitative detection of Epstein-Barr Virus (EBV) in T-dell depleted allogeneic stem cell transplant patients. This enabled us to develop models for pre-emptive anti B-cell immunotherapy for EBV reactivation, thereby effectively reducing not the incidence of EBV-lymphoproliferative disease but the virus related mortality. Furthermore, additional clinically relevant viruses can now easily be detected simultaneously. It also becomes more feasible to introduce molecular testing for those viruses that can easily be detected using classical virological methods, like culture techniques or antigen detection. Prospective studies are needed to evaluate the clinical importance of the additional positive samples detected. It should however be made clear that a complete exchange of technologies is unlikely to occur, and that some complementary technologies should stay operational enabling the discovery of new viruses. The implementation of these molecular diagnostic technologies furthermore

  19. Mobile real time radiography system

    Energy Technology Data Exchange (ETDEWEB)

    Vigil, J.; Taggart, D.; Betts, S. [Los Alamos National Lab., NM (United States)] [and others

    1997-11-01

    A 450-keV Mobile Real Time Radiography (RTR) System was delivered to Los Alamos National Laboratory (LANL) in January 1996. It was purchased to inspect containers of radioactive waste produced at (LANL). Since its delivery it has been used to radiograph more than 600 drums of radioactive waste at various LANL sites. It has the capability of inspecting waste containers of various sizes from <1-gal. buckets up to standard waste boxes (SWB, dimensions 54.5 in. x 71 in. x 37 in.). It has three independent x-ray acquisition formats. The primary system used is a 12- in. image intensifier, the second is a 36-in. linear diode array (LDA) and the last is an open system. It is fully self contained with on board generator, HVAC, and a fire suppression system. It is on a 53-ft long x 8-ft. wide x 14-ft. high trailer that can be moved over any highway requiring only an easily obtainable overweight permit because it weights {approximately}38 tons. It was built to conform to industry standards for a cabinet system which does not require an exclusion zone. The fact that this unit is mobile has allowed us to operate where the waste is stored, rather than having to move the waste to a fixed facility.

  20. Students Collecting Real time Data

    Science.gov (United States)

    Miller, P.

    2006-05-01

    Students Collecting Real-Time Data The Hawaiian Islands Humpback Whale National Marine Sanctuary has created opportunities for middle and high school students to become Student Researchers and to be involved in real-time marine data collection. It is important that we expose students to different fields of science and encourage them to enter scientific fields of study. The Humpback Whale Sanctuary has an education visitor center in Kihei, Maui. Located right on the beach, the site has become a living classroom facility. There is a traditional Hawaiian fishpond fronting the property. The fishpond wall is being restored, using traditional methods. The site has the incredible opportunity of incorporating Hawaiian cultural practices with scientific studies. The Sanctuary offers opportunities for students to get involved in monitoring and data collection studies. Invasive Seaweed Study: Students are collecting data on invasive seaweed for the University of Hawaii. They pull a large net through the shallow waters. Seaweed is sorted, identified and weighed. The invasive seaweeds are removed. The data is recorded and sent to UH. Remote controlled monitoring boats: The sanctuary has 6 boogie board sized remote controlled boats used to monitor reefs. Boats have a camera with lights on the underside. The boats have water quality monitoring devices and GPS units. The video from the underwater camera is transmitted via a wireless transmission. Students are able to monitor the fish, limu and invertebrate populations on the reef and collect water quality data via television monitors or computers. The boat can also pull a small plankton tow net. Data is being compiled into data bases. Artificial Reef Modules: The Sanctuary has a scientific permit from the state to build and deploy artificial reef modules. High school students are designing and building modules. These are deployed out in the Fishpond fronting the Sanctuary site and students are monitoring them on a weekly basis

  1. Towards real time speckle controlled retinal photocoagulation

    Science.gov (United States)

    Bliedtner, Katharina; Seifert, Eric; Stockmann, Leoni; Effe, Lisa; Brinkmann, Ralf

    2016-03-01

    Photocoagulation is a laser treatment widely used for the therapy of several retinal diseases. Intra- and inter-individual variations of the ocular transmission, light scattering and the retinal absorption makes it impossible to achieve a uniform effective exposure and hence a uniform damage throughout the therapy. A real-time monitoring and control of the induced damage is highly requested. Here, an approach to realize a real time optical feedback using dynamic speckle analysis is presented. A 532 nm continuous wave Nd:YAG laser is used for coagulation. During coagulation, speckle dynamics are monitored by a coherent object illumination using a 633nm HeNe laser and analyzed by a CMOS camera with a frame rate up to 1 kHz. It is obvious that a control system needs to determine whether the desired damage is achieved to shut down the system in a fraction of the exposure time. Here we use a fast and simple adaption of the generalized difference algorithm to analyze the speckle movements. This algorithm runs on a FPGA and is able to calculate a feedback value which is correlated to the thermal and coagulation induced tissue motion and thus the achieved damage. For different spot sizes (50-200 μm) and different exposure times (50-500 ms) the algorithm shows the ability to discriminate between different categories of retinal pigment epithelial damage ex-vivo in enucleated porcine eyes. Furthermore in-vivo experiments in rabbits show the ability of the system to determine tissue changes in living tissue during coagulation.

  2. Efficacy of Real-time Teaching Based on QQ Live Network Platform in Rehabilitation Therapy Teaching%实时网络平台实景的康复治疗学教学的效果

    Institute of Scientific and Technical Information of China (English)

    朱毅; 李凝; 励建安

    2012-01-01

    目的:研究评价基于QQ实时网络平台实景教学的康复治疗学教学效果.方法:将南京中医药大学康复治疗学专业67名学生,随机分为课堂教学组(课堂组)34名和QQ网络平台实景教学组(网络组)33名,分别采用普通课堂教学法与QQ实时网络平台实景教学法.2学时教学后采用教育环境测量(DREEM)表调查问卷对教学效果进行评价.结果:课堂组和网络组分别收回31份(91.2%)、29份(87.9%)有效问卷.DREEM显示2组总分均较高,但网络组明显高于课堂组.各单项目分中,网络组在学习、教师、环境及学术自我知觉以及总分5方面评分均明显高于课堂组(P<0.05).结论:实时网络平台实景教学可提高学生学习动机,改善教育环境和教学质量,是一种新型、有效、便捷、低成本的教学模式.%Objective: To evaluate the efficacy of real-lime teaching based on QQ live network platform on rehabilitation therapy teaching. Methods: Sixty-seven students from Nanjing University of Traditional Chinese Medicine specialized in rehabilitation therapy were randomly divided into two groups: classroom teaching group (34 students) and teaching group based on QQ live network platform (33 students). receiving the ordinary classroom teaching and real-time teaching based on QQ live network platform respectively. After 2 teaching-hours, educational environment was measured by DREEM table. Resultsj There were 31 and 29 questionnaires recovered in the classroom teaching group and the network platform group respectively. There were significant differences in the scores of perceptual learning, teacher perception, academic self-perception, environmental perception and total scores of the six factors between the real-time teaching group based on QQ live network platform and classroom teaching group (i><0. 05). Conclusion. As a new, effective, convenient and low-cost mode of teaching, real-time teaching based on QQ live network platform can

  3. Improvement on transmission reliability of real-time measuring data via internet%提升实时测量数据在Internet上的传输可靠性

    Institute of Scientific and Technical Information of China (English)

    王维甦; 赵伟

    2003-01-01

    在进行网络化测量过程中,因地域上的广阔分隔,传输测量数据必然要经过Internet.本文讨论基于Internet进行实时测量时,数据传输交换可能受到的约束,并结合当前最新网络技术及其发展趋势,设想了提高实时测量数据在Internet上传输的可靠性.

  4. Real-Time 3D Visualization

    Science.gov (United States)

    1997-01-01

    Butler Hine, former director of the Intelligent Mechanism Group (IMG) at Ames Research Center, and five others partnered to start Fourth Planet, Inc., a visualization company that specializes in the intuitive visual representation of dynamic, real-time data over the Internet and Intranet. Over a five-year period, the then NASA researchers performed ten robotic field missions in harsh climes to mimic the end- to-end operations of automated vehicles trekking across another world under control from Earth. The core software technology for these missions was the Virtual Environment Vehicle Interface (VEVI). Fourth Planet has released VEVI4, the fourth generation of the VEVI software, and NetVision. VEVI4 is a cutting-edge computer graphics simulation and remote control applications tool. The NetVision package allows large companies to view and analyze in virtual 3D space such things as the health or performance of their computer network or locate a trouble spot on an electric power grid. Other products are forthcoming. Fourth Planet is currently part of the NASA/Ames Technology Commercialization Center, a business incubator for start-up companies.

  5. A Real-Time System for Abusive Network Traffic Detection

    Science.gov (United States)

    2011-03-01

    modular architecture, SpamAssassin can be extended to include other filtering techniques, such as real-time blackhole lists (RBLs), whitelists...lookups in blackhole lists (RBL), collaborative filtering with Ryzor [30], Pyzor [53], and DCC [33]), because our virtual environment was insulated from...realtime blackhole list (RBL). Available: http://www.mail-abuse.com/pdf/WP_MAPS_RBL_060104.pdf. [13] J. Postel. (1981, September). Internet

  6. Real-time performance evaluation of media pipeline plug-in architectures

    CSIR Research Space (South Africa)

    Sentongo, VN

    2011-09-01

    Full Text Available Deployment of real-time applications has become ubiquitous in recent years. These applications (e.g. streaming video over the Internet) however, are processor intensive and require fast video-processing techniques for more flexible, efficient...

  7. 基于物联网的用户内部水量平衡实时监测系统%Real-Time and Internal Water Balance Monitoring System of Water Supply Users Based on Internet of Things

    Institute of Scientific and Technical Information of China (English)

    桂轶; 陈祖平; 喻聆雯; 苗雨; 周亚光

    2013-01-01

    通过将无线慢跳频自组网的物联网技术应用于水表抄表系统中,能够实时准确地得到抄表数据.对数据进行智能分析,能使用户了解每天每月甚至每年的用水情况;通过数据比对,能检测到输水管网可能存在的漏损问题,达到节约用水的目的.%By applying wireless slow frequency hopping technique of internet of things, the reading reliability and correctness of the automatic water meter reading system are greatly improved. The customers can analyze history water data conveniently and detect the leakage of pipe networks more easily, therefore assist water saving.

  8. Using mobile, internet connected deep sea crawlers for spatial and temporal analysis of cold seep ecosystems and the collection of real-time classroom data for extreme environment education.

    Science.gov (United States)

    Purser, Autun; Kwasnitschka, Tom; Duda, Alexander; Schwendner, Jakob; Bamberg, Marlene; Sohl, Frank; Doya, Carol; Aguzzi, Jacopo; Best, Mairi; Llovet, Neus Campanya I.; Scherwath, Martin; Thomsen, Laurenz

    2015-04-01

    Cabled internet and power connectivity with the deep sea allow instruments to operate in the deep sea at higher temporal resolutions than was possible historically, with the reliance on battery life and data storage capacities. In addition to the increase in sensor temporal frequency, cabled infrastructures now allow remote access to and control of mobile platforms on the seafloor. Jacobs University Bremen, in combination with collaborators from the Robotic Exploration of Extreme Environments (ROBEX) project, CSIC Barcelona and Ocean Networks Canada have been operating tracked deep sea crawler vehicles at ~890 m depth at the dynamic Barkley Canyon methane seep site, Pacific Canada during the last ~4 years. The vehicle has been able to explore an area of ~50 m radius, allowing repeated visits to numerous microhabitats. Mounting a range of sensors, including temperature, pressure, conductivity, fluorescence, turbidity, flow and methane concentration sensors, as well as various camera systems a large dataset has been compiled. Several methane pockmarks are present in the survey area, and geological, biological and oceanographic changes have been monitored over a range of timescales. Several publications have been produced, and in this presentation we introduce further data currently under analysis. Cabled internet connectivity further allows mobile platforms to be used directly in education. As part of the ROBEX project, researchers and students from both terrestrial and planetary sciences are using the crawler in an ongoing study project. Students are introduced to statistical methods from both fields during the course and in later stages they can plan their own research using the in-situ crawler, and follow the progress of their investigations live, then analyse the collected data using the techniques introduced during the course. Cabled infrastructures offer a unique facility for spatial investigation of extreme ecosystems over time, and for the 'hands on

  9. Space Weather and Real-Time Monitoring

    OpenAIRE

    2009-01-01

    Recent advance of information and communications technology enables to collect a large amount of ground-based and space-based observation data in real-time. The real-time data realize nowcast of space weather. This paper reports a history of space weather by the International Space Environment Service (ISES) in association with the International Geophysical Year (IGY) and importance of real-time monitoring in space weather.

  10. Space Weather and Real-Time Monitoring

    Directory of Open Access Journals (Sweden)

    S Watari

    2009-04-01

    Full Text Available Recent advance of information and communications technology enables to collect a large amount of ground-based and space-based observation data in real-time. The real-time data realize nowcast of space weather. This paper reports a history of space weather by the International Space Environment Service (ISES in association with the International Geophysical Year (IGY and importance of real-time monitoring in space weather.

  11. 二维电离室矩阵实时验证 VMAT 剂量价值研究%Real-time patient transit dose verification of volumetric modulated arc therapy by a 2D ionization chamber array

    Institute of Scientific and Technical Information of China (English)

    刘潇; 王运来; 鞠忠建; 徐伟; 金丽媛

    2015-01-01

    Objective To study the real?time dose verification with 2D array ion chamber array in volumetric modulated arc therapy ( VMAT) with a 2D array ion chamber array. Methods The 2D ion chamber array was fixed on the panel of electronic portal imaging device (EPID). Source?detector distance (SDD) was 140 cm. 8 mm RW3 solid water was added to the 2D array to improve the signal noise ratio. Patient plans for esophageal, prostate and liver cancers were selected to be delivered on the cylindrical Cheese phantom 5 times in order to validate the reproducibility of doses. Real?time patient transit dose measurements were performed at each fraction. Dose distributions were evaluated using gamma index criteria of 3 mm DTA and 3% dose difference referred to the first time result. Results The gamma index pass rate in the Cheese phantom were about 98%;the gamma index pass rate for esophageal, prostate and liver cancer patient were about 92%, 92% and 94%, respectively. Gamma pass rate for all single fraction were more than 90%. Conclusions The 2D array is capable of monitoring the real time transit doses during VMAT delivery. It is helpful to improve the treatment accuracy.%目的:探讨利用二维电离室矩阵进行 VMAT 患者透射剂量实时验证的临床价值。方法将二维电离室矩阵面板粘贴固定在加速器 EPID 探测面板上,源到 EPID 探测面板距离为140 cm。电离室矩阵面板上加8 mm 的 RW3固体水以提高信躁比。选取食管癌、前列腺癌、肝癌患者计划,在圆柱形 Cheese 模体上照射测量5次,研究患者计划在模体中剂量验证的可行性与准确性。患者每次治疗时进行实时测量,第1次测量结果作为参考剂量,利用γ分析比较分次间剂量误差。结果采用3%3 mm 标准,Cheese 模体 VMAT 计划的γ通过率为98%左右,食管癌、前列腺癌和肝癌患者实时照射γ通过率分别约为92%、92%和94%。整个治疗过程中

  12. Real-time graphics rendering engine

    CERN Document Server

    Bao, Hujun

    2011-01-01

    ""Real-Time Graphics Rendering Engine"" reveals the software architecture of the modern real-time 3D graphics rendering engine and the relevant technologies based on the authors' experience developing this high-performance, real-time system. The relevant knowledge about real-time graphics rendering such as the rendering pipeline, the visual appearance and shading and lighting models are also introduced. This book is intended to offer well-founded guidance for researchers and developers who are interested in building their own rendering engines. Hujun Bao is a professor at the State Key Lab of

  13. Research in Distributed Real-Time Systems

    Science.gov (United States)

    Mukkamala, R.

    1997-01-01

    This document summarizes the progress we have made on our study of issues concerning the schedulability of real-time systems. Our study has produced several results in the scalability issues of distributed real-time systems. In particular, we have used our techniques to resolve schedulability issues in distributed systems with end-to-end requirements. During the next year (1997-98), we propose to extend the current work to address the modeling and workload characterization issues in distributed real-time systems. In particular, we propose to investigate the effect of different workload models and component models on the design and the subsequent performance of distributed real-time systems.

  14. Real-time Pricing in Power Markets

    DEFF Research Database (Denmark)

    Boom, Anette; Schwenen, Sebastian

    We examine welfare eects of real-time pricing in electricity markets. Before stochastic energy demand is known, competitive retailers contract with nal consumers who exogenously do not have real-time meters. After demand is realized, two electricity generators compete in a uniform price auction...... to satisfy demand from retailers acting on behalf of subscribed customers and from consumers with real-time meters. Increasing the number of consumers on real-time pricing does not always increase welfare since risk-averse consumers dislike uncertain and high prices arising through market power...

  15. Real-time Pricing in Power Markets

    DEFF Research Database (Denmark)

    Boom, Anette; Schwenen, Sebastian

    We examine welfare e ects of real-time pricing in electricity markets. Before stochastic energy demand is known, competitive retailers contract with nal consumers who exogenously do not have real-time meters. After demand is realized, two electricity generators compete in a uniform price auction...... to satisfy demand from retailers acting on behalf of subscribed customers and from consumers with real-time meters. Increasing the number of consumers on real-time pricing does not always increase welfare since risk-averse consumers dislike uncertain and high prices arising through market power...

  16. Real-Time Tropospheric Delay Estimation using IGS Products

    Science.gov (United States)

    Stürze, Andrea; Liu, Sha; Söhne, Wolfgang

    2014-05-01

    The Federal Agency for Cartography and Geodesy (BKG) routinely provides zenith tropospheric delay (ZTD) parameter for the assimilation in numerical weather models since more than 10 years. Up to now the results flowing into the EUREF Permanent Network (EPN) or E-GVAP (EUMETNET EIG GNSS water vapour programme) analysis are based on batch processing of GPS+GLONASS observations in differential network mode. For the recently started COST Action ES1206 about "Advanced Global Navigation Satellite Systems tropospheric products for monitoring severe weather events and climate" (GNSS4SWEC), however, rapid updates in the analysis of the atmospheric state for nowcasting applications require changing the processing strategy towards real-time. In the RTCM SC104 (Radio Technical Commission for Maritime Services, Special Committee 104) a format combining the advantages of Precise Point Positioning (PPP) and Real-Time Kinematic (RTK) is under development. The so-called State Space Representation approach is defining corrections, which will be transferred in real-time to the user e.g. via NTRIP (Network Transport of RTCM via Internet Protocol). Meanwhile messages for precise orbits, satellite clocks and code biases compatible to the basic PPP mode using IGS products are defined. Consequently, the IGS Real-Time Service (RTS) was launched in 2013 in order to extend the well-known precise orbit and clock products by a real-time component. Further messages e.g. with respect to ionosphere or phase biases are foreseen. Depending on the level of refinement, so different accuracies up to the RTK level shall be reachable. In co-operation of BKG and the Technical University of Darmstadt the real-time software GEMon (GREF EUREF Monitoring) is under development. GEMon is able to process GPS and GLONASS observation and RTS product data streams in PPP mode. Furthermore, several state-of-the-art troposphere models, for example based on numerical weather prediction data, are implemented. Hence, it

  17. Storm real-time processing cookbook

    CERN Document Server

    Anderson, Quinton

    2013-01-01

    A Cookbook with plenty of practical recipes for different uses of Storm.If you are a Java developer with basic knowledge of real-time processing and would like to learn Storm to process unbounded streams of data in real time, then this book is for you.

  18. Interactive Real-time Magnetic Resonance Imaging

    DEFF Research Database (Denmark)

    Brix, Lau

    Real-time acquisition, reconstruction and interactively changing the slice position using magnetic resonance imaging (MRI) have been possible for years. However, the current clinical use of interactive real-time MRI is limited due to an inherent low spatial and temporal resolution. This PhD proje...

  19. Validation of RNAi by real time PCR

    DEFF Research Database (Denmark)

    Josefsen, Knud; Lee, Ying Chiu

    2011-01-01

    Real time PCR is the analytic tool of choice for quantification of gene expression, while RNAi is concerned with downregulation of gene expression. Together, they constitute a powerful approach in any loss of function studies of selective genes. We illustrate here the use of real time PCR to veri...

  20. Real-time communication protocols: an overview

    NARCIS (Netherlands)

    Hanssen, Ferdy; Jansen, Pierre G.

    2003-01-01

    This paper describes several existing data link layer protocols that provide real-time capabilities on wired networks, focusing on token-ring and Carrier Sense Multiple Access based networks. Existing modifications to provide better real-time capabilities and performance are also described. Finally

  1. Real-time communication protocols: an overview

    OpenAIRE

    Hanssen, Ferdy; Jansen, Pierre G.

    2003-01-01

    This paper describes several existing data link layer protocols that provide real-time capabilities on wired networks, focusing on token-ring and Carrier Sense Multiple Access based networks. Existing modifications to provide better real-time capabilities and performance are also described. Finally the pros and cons regarding the At-Home Anywhere project are discussed.

  2. Real-time Pricing in Power Markets

    DEFF Research Database (Denmark)

    Boom, Anette; Schwenen, Sebastian

    to satisfy demand from retailers acting on behalf of subscribed customers and from consumers with real-time meters. Increasing the number of consumers on real-time pricing does not always increase welfare since risk-averse consumers dislike uncertain and high prices arising through market power...

  3. Interactive Real-time Magnetic Resonance Imaging

    DEFF Research Database (Denmark)

    Brix, Lau

    Real-time acquisition, reconstruction and interactively changing the slice position using magnetic resonance imaging (MRI) have been possible for years. However, the current clinical use of interactive real-time MRI is limited due to an inherent low spatial and temporal resolution. This PhD proje...

  4. SU-D-304-01: Development of An Applicator for Treating Shallow and Moving Tumors with Respiratory-Gated Spot-Scanning Proton Therapy Using Real-Time Image Guidance

    Energy Technology Data Exchange (ETDEWEB)

    Matsuura, T; Fujii, Y; Takao, S; Yamada, T; Matsuzaki, Y; Miyamoto, N; Shimizu, S; Shirato, H [Proton Beam Therapy Center, Hokkaido University Hospital, Sapporo, Hokkaido (Japan); Takayanagi, T; Fujitaka, S [Hitachi, Ltd., Hitachi Research Laboratory, Hitachi, Ibaraki (Japan); Umegaki, K [Faculty of Engineering, Hokkaido University, Sapporo, Hokkaido (Japan)

    2015-06-15

    Purpose: To develop a method for treating shallow and moving tumors (e.g., lung tumors) with respiratory-gated spot-scanning proton therapy using real-time image guidance (RTPT). Methods: An applicator was developed which can be installed by hand on the treatment nozzle. The mechanical design was considered such that the Bragg peaks are placed at the patient surface while a sufficient field of view (FOV) of fluoroscopic X-rays was maintained during the proton beam delivery. To reduce the treatment time maintaining the robustness of the dose distribution with respect to motion, a mini-ridge filter (MRF) was sandwiched between two energy absorbers. The measurements were performed to obtain a data for beam modeling and to verify the spot position-invariance of a pencil beam dose distribution. For three lung cancer patients, treatment plans were made with and without the MRF and the effects of the MRF were evaluated. Next, the effect of respiratory motion on the dose distribution was investigated. Results: To scan the proton beam over a 14 x 14 cm area while maintaining the φ16 cm of fluoroscopic FOV, the lower face of the applicator was set 22 cm upstream of the isocenter. With an additional range variance of 2.2 mm and peak-to-peak distance of 4 mm of the MRF, the pencil beam dose distribution was unchanged with the displacement of the spot position. The quality of the treatment plans was not worsened by the MRF. With the MRF, the number of energy layers was reduced to less than half and the treatment time by 26–37%. The simulation study showed that the interplay effect was successfully suppressed by respiratory-gating both with and without MRF. Conclusions: The spot-scanning proton beam was successfully delivered to shallow and moving tumors within a sufficiently short time by installing the developed applicator at the RTPT nozzle.

  5. Development and evaluation of a short-range applicator for treating superficial moving tumors with respiratory-gated spot-scanning proton therapy using real-time image guidance

    Science.gov (United States)

    Matsuura, Taeko; Fujii, Yusuke; Takao, Seishin; Yamada, Takahiro; Matsuzaki, Yuka; Miyamoto, Naoki; Takayanagi, Taisuke; Fujitaka, Shinichiro; Shimizu, Shinichi; Shirato, Hiroki; Umegaki, Kikuo

    2016-02-01

    Treatment of superficial tumors that move with respiration (e.g. lung tumors) using spot-scanning proton therapy (SSPT) is a high-priority research area. The recently developed real-time image-gated proton beam therapy (RGPT) system has proven to be useful for treating moving tumors deep inside the liver. However, when treating superficial tumors, the proton’s range is small and so is the sizes of range straggling, making the Bragg-peaks extremely sharp compared to those located in deep-seated tumors. The extreme sharpness of Bragg-peaks is not always beneficial because it necessitates a large number of energy layers to make a spread-out Bragg-peak, resulting in long treatment times, and is vulnerable to motion-induced dose deterioration. We have investigated a method to treat superficial moving tumors in the lung by the development of an applicator compatible with the RGPT system. A mini-ridge filter (MRF) was developed to broaden the pristine Bragg-peak and, accordingly, decrease the number of required energy layers to obtain homogeneous irradiation. The applicator position was designed so that the fiducial marker’s trajectory can be monitored by fluoroscopy during proton beam-delivery. The treatment plans for three lung cancer patients were made using the applicator, and four-dimensional (4D) dose calculations for the RGPT were performed using patient respiratory motion data. The effect of the MRF on the dose distributions and treatment time was evaluated. With the MRF, the number of energy layers was decreased to less than half of that needed without it, whereas the target volume coverage values (D99%, D95%, D50%, D2%) changed by less than 1% of the prescribed dose. Almost no dose distortion was observed after the 4D dose calculation, whereas the treatment time decreased by 26%-37%. Therefore, we conclude that the developed applicator compatible with RGPT is useful to solve the issue in the treatment of superficial moving tumors with SSPT.

  6. Internet use by the socially fearful: addiction or therapy?

    Science.gov (United States)

    Campbell, Andrew J; Cumming, Steven R; Hughes, Ian

    2006-02-01

    The Internet has often been argued to have adverse psychological consequences, such as depression or anxiety symptoms, among "over-users." The present study offers an alternative understanding, suggesting the Internet may be used as a forum for expanding social networks and consequently enhancing the chance of meaningful relationships, self-confidence, social abilities, and social support. An online sample of 188 people was recruited over the Internet, while paper and pencil tests were administered to an offline sample group of 27 undergraduate university students, who were regular Internet users. Subjects completed the Zung Depression Scale (ZDS), Depression, Anxiety and Stress Scales (DASS), Eysenck Personality Questionnaire?Revised Short Scale (EPQ-R Short), Fear of Negative Evaluation (FNE) scale, Internet Use Questionnaire (IUQ), and an Internet Effects Questionnaire (IEQ). Results suggested that there was no relationship between time spent online and depression, anxiety, or social fearfulness. Those who primarily used the Internet for online chat believed that the Internet is psychologically beneficial to them, but also believed that frequent Internet users are lonely and that the Internet can be addictive. It is argued that "chat" users who are socially fearful may be using the Internet as a form of low-risk social approach and an opportunity to rehearse social behavior and communication skills, which, may help them improve interaction with offline, face-to-face, social environments.

  7. The ALMA Real Time Control System

    Science.gov (United States)

    Kern, Jeffrey S.; Juerges, Thomas A.; Marson, Ralph G.

    2009-01-01

    The Atacama Large Millimeter Array (ALMA) is a revolutionary millimeter and submillimeter array being developed on the Atacama plateau of northern Chile. An international partnership lead by NRAO, ESO, and NAOJ this powerful and flexible telescope will provide unprecedented observations of this relatively unexplored frequency range. The control subsystem for the Atacama Large Millimeter Array must coordinate the monitor and control of at least sixty six antennas (in four different styles), two correlators, and all of the ancillary equipment (samplers, local oscillators, front ends, etc.). This equipment will be spread over tens of kilometers and operated remotely. Operation of the array requires a robust, scalable, and maintainable real time control system. The real time control system is responsible for monitoring and control of any devices where there are fixed deadlines. Examples in the ALMA context are antenna pointing and fringe tracking. Traditionally the real time portion of a large software system is an intricate and error prone portion of the software. As a result the real time portion is very expensive in terms of effort expended both during construction and during maintenance phases of a project. The ALMA real time control system uses a Linux based real time operating system to interact with the hardware and the CORBA based ALMA Common Software to communicate in the distributed computing environment. Mixing the requirements of real time computing and the non-deterministic CORBA middleware has produced an interesting design. We discuss the architecture, design, and implementation of the ALMA real time control system. Highlight some lessons learned along the way, and justify our assertion that this should be the last large scale real time control system in radio astronomy.

  8. Achieving real-time performance in FIESTA

    Science.gov (United States)

    Wilkinson, William; Happell, Nadine; Miksell, Steve; Quillin, Robert; Carlisle, Candace

    1988-01-01

    The Fault Isolation Expert System for TDRSS Applications (FIESTA) is targeted for operation in a real-time online environment. Initial stages of the prototype development concentrated on acquisition and representation of the knowledge necessary to isolate faults in the TDRSS Network. Recent efforts focused on achieving real-time performance including: a discussion of the meaning of FIESTA real-time requirements, determination of performance levels (benchmarking) and techniques for optimization. Optimization techniques presented include redesign of critical relations, filtering of redundant data and optimization of patterns used in rules. Results are summarized.

  9. Real-time medical applications and telecommunications.

    Science.gov (United States)

    Stravs, M

    1999-01-01

    Telecommunications play an important role in telemedicine. Many forms of telecommunication services based on different telecommunication technologies are developed for various needs. The paper deals with complex real-time applications which demand high telecommunication requirements. At the beginning, medical applications are categorised and real-time applications qualified as multimedia applications. Requirements for multimedia elements are listed separately. Later on, short introduction of related telecommunication protocols is given. Real-time medical applications can show their ability in case of guaranteed quality of services delivered by telecommunication network as it is explained in the end.

  10. Real time detecting system for turning force

    CERN Document Server

    Yue Xiao Bin

    2001-01-01

    How to get the real-time value of forces dropped on the tool in the course of processing by piezoelectric sensors is introduced. First, the analog signals of the cutting force were achieved by these sensors, amplified and transferred into digital signals by A/D transferring card. Then real-time software reads the information, put it into its own coordinate, drew the curve of forces, displayed it on the screen by the real time and saved it for the technicians to analyze the situation of the tool. So the cutting parameter can be optimized to improve surface quality of the pieces

  11. IGS Real-time Resources Supporting Multi-GNSS Experiment

    Science.gov (United States)

    Weber, Georg; Mervart, Leos; Stöcker, Dirk; Neumaier, Peter; Söhne, Wolfgang; Stürze, Andrea

    2013-04-01

    The International GNSS Service (IGS) recently started with a real-time service disseminating orbit and clock corrections over the Internet. It is mainly based on observations collected from the IGS real-time tracking network processed by a number for Analysis Centers. To support the IGS Multi-GNSS Experiment (M-GEX), a growing number of involved stations also observe Galileo, QZSS and BeiDou in addition to GPS and GLONASS. The intention is to enable and further develop the real-time estimation of satellite orbits and clocks from all systems as well as using all of them in applications like real-time Precise Point Positioning (PPP). Recently a new RTCM-3 standard has been recommended to transport streams carrying observations from (modernized) GPS, GLONASS and Galileo satellites. A stream format supporting QZSS and BeiDou has been drafted. A new RINEX-3 standard is under development which allows archiving all observation types from all the new systems for post processing purposes. This presentation focuses on IGS resources for real-time conversion of observations in proprietary raw formats to the new open RTCM-3 stream and RINEX-3 file standards. So-called High Precision Multiple Signal Message (HP MSM) streams are produced and disseminated via Ntrip broadcaster under the umbrella of IGS. A high-rate RINEX-3 archive saves 1 Hz observation files as converted from MSM streams. RINEX-3 file editing, concatenation and quality check is enabled with the BKG Ntrip Client (BNC) software developed under GNU GPL supporting GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS.

  12. A new fast friendly window-based congestion control for real-time streaming media transmission

    Institute of Scientific and Technical Information of China (English)

    LI Yongli; LIU Guizhong; ZHANG Zhongwei; WU Chenggui

    2005-01-01

    Real-time streaming media over the Internet is an important component of multimedia applications. For the sake of quality of service (QoS), they make rigid demands on bandwidth, delay and packet loss. However, the current Internet does not offer any QoS guarantees to real-time streaming media over it. How to maximize the transmission quality of real-time streaming applications in a best-effort network while friendly sharing bandwidth with non-real time applications like TCP has become an important issue. But now, many real-time streaming applications based on UDP rarely perform congestion control in a TCP-friendly manner, and they do not share the available bandwidth fairly with applications built on TCP. The Internet communication strongly fears that the current evolution could lead to congestion collapse and starvation of TCP traffic. For this reason, TCP-friendly protocols are being developed to behave fairly with respect to coexistent TCP flows. In this paper we present a new window-based congestion control method-fast fair binomial congestion control (FFBCC) for real-time applications. It provides a good performance of bandwidth distribution and TCP-friendliness for real-time streaming transmission while competing bandwidth with TCP flows.

  13. Visualization in Real-Time Experiment Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of this project will be to migrate some of the outputs from the WFF Mission Planning Lab (MPL) into a real-time visualization system.  The MPL is...

  14. Real Time Study and Related Variables

    Institute of Scientific and Technical Information of China (English)

    WU Xiao-qing

    2016-01-01

    This paper first, illustrates the advantages of applying real time study to linguistic researches. Second, this paper also compares linguistic variables with linguistic variant; nasality, stronger constraint and weaker constraint have been clearly de-fined as well.

  15. Multiprocessor scheduling for real-time systems

    CERN Document Server

    Baruah, Sanjoy; Buttazzo, Giorgio

    2015-01-01

    This book provides a comprehensive overview of both theoretical and pragmatic aspects of resource-allocation and scheduling in multiprocessor and multicore hard-real-time systems.  The authors derive new, abstract models of real-time tasks that capture accurately the salient features of real application systems that are to be implemented on multiprocessor platforms, and identify rules for mapping application systems onto the most appropriate models.  New run-time multiprocessor scheduling algorithms are presented, which are demonstrably better than those currently used, both in terms of run-time efficiency and tractability of off-line analysis.  Readers will benefit from a new design and analysis framework for multiprocessor real-time systems, which will translate into a significantly enhanced ability to provide formally verified, safety-critical real-time systems at a significantly lower cost.

  16. Internet-based therapy for adolescents with chronic fatigue syndrome: long-term follow-up

    NARCIS (Netherlands)

    Nijhof, S.L.; Priesterbach, L.P.; Uiterwaal, C.S.; Bleijenberg, G.; Kimpen, J.L.L.; Putte, E.M. van de

    2013-01-01

    OBJECTIVE: Cognitive behavioral therapy (CBT) is known to be an effective treatment of adolescents with chronic fatigue syndrome (CFS), but its availability is limited. Fatigue in Teenagers on the Internet (FITNET), an Internet-based CBT program for adolescents with CFS, has been developed as an alt

  17. Real-Time Sensor-Actuator Networks

    OpenAIRE

    Sastry, Shivakumar; S. S. Iyengar

    2005-01-01

    Emerging technologies offer new paradigms for computation, control, collaboration, and communication. To realize the full potential of these technologies in industry, defense, and homeland security applications, it is necessary to exploit the real-time distributed computing capabilities of sensor-actuator networks. To reliably design and develop such networks, it is necessary to develop deeper insight into the underlying model for real-time computation and the infrastructure at the node level...

  18. Real Time Information Fusion in Military Systems

    Directory of Open Access Journals (Sweden)

    E. Bhagiratharao

    1990-01-01

    Full Text Available With the proliferation of sensors on platforms like battle ships and aircraft, the information to be handled by the battlefield commanders has significantly increased in the recent time. From a deluge of information flowing from sensors, the battlefield commander is required to make situation assessment in real-time and take appropriate action. Recent studies by cognitive scientists have indicated that decision making by individuals as well as a team suffer from several biases. For these two reasons, the battlefield commanders need assistance of real-time information fusion systems to take objective assessment of highly dynamic battle situation in real-time information fusion systems to take objective assessment of a highly dynamic battle situation in real-time. The real-time information fusion systems at a single platform level as well as that applicable for geographically distributed platforms is discussed in detail in this paper. It was concluded that by carrying out these activities at the platform level as well as at 'global' level involving several platforms, the limitations in performance of any sensor due to propagation effects or due to enemy counter measures can be significantly minimised or totally eliminated. At the same time the functional effectiveness of each sensor onboard different platforms, becomes better than when it had to operate autonomously within the real-time information fusion facility. By carrying out global real-time information fusion activity in a theatre of war, all the platforms operating in the area will have the benefit of the best sensor in that area on each aspect of the capability. A few examples of real-time information fusion system are also discussed.

  19. Scala for Real-Time Systems?

    DEFF Research Database (Denmark)

    Schoeberl, Martin

    2015-01-01

    Java served well as a general-purpose language. However, during its two decades of constant change it has gotten some weight and legacy in the language syntax and the libraries. Furthermore, Java's success for real-time systems is mediocre. Scala is a modern object-oriented and functional language...... with interesting new features. Although a new language, it executes on a Java virtual machine, reusing that technology. This paper explores Scala as language for future real-time systems....

  20. The LAA real-time benchmarks

    Energy Technology Data Exchange (ETDEWEB)

    Block, R.K.; Krischer, W.; Lone, S. [CERN, Geneva (Switzerland)

    1989-04-01

    In the context of the LAA detector development program a subgroup Real Time Data Processing has tackled the problem of intelligent triggering. The main goal of this group is to show how fast digital devices, implemented as custom-made or commercial processors, can execute some basic algorithms, and how they can be embedded in the data flow between detector readout components and fully programmable commercial processors, which are expected to be the final data processing filter in real time.

  1. Real-time Forecast of Passenger Crowd Index on Urban Rail Transit Station Platform Based on Test Data of Internet of Things%基于物联网设备检测数据的城市轨道交通车站站台多维度实时客流密集度指数预测方法研究

    Institute of Scientific and Technical Information of China (English)

    李得伟; 尹浩东

    2014-01-01

    Accurate real-time forecast of passenger flow is the basis of passenger flow early warning and evacua-tion in urban rail transit.This article focused on the real-time station platform passenger crowd index on fore-cast problem present with urban rail transit.According to the intermittent feature of real-time passenger flow, the on-line real-time forecast models for 30 s,3 min and 15 min dimensions were built on the basis of 30 s cyc-ling of real test data.In view of practical needs,the ARIMA model for 30 s,the multi factor logistic model for 3 min and the integrated gray and move average model for 1 5 min were built to estimate forecast parameters re-spectively.On-line tests during morning and evening peak time and common time at more than 10 stations proved the correctness of the structrual models.Taking the Beij ing Metro Zoo Station for case study,the de-grees of accuracy corresponding to the three above-mentioned time dimensions were obtained as 9 7%,9 5% and 9 9%.The research results show that the proposed models are of good effects on predicting real-time passenger flow in urban rail transit stations.The models have been used in the demonstrative project of the Beijing Metro internet of things for safety and initial results have been achieved.%实时准确的客流预测是城市轨道交通客流预警和疏导的基础。本文针对城市轨道交通车站站台的实时客流密集度指数预测问题,根据实时客流的“间歇性”特点,依据30 s为周期的真实检测数据,分别构建低、中、高3个时间维度在线实时预测模型。根据应用需要,对30 s 低纬度预测采用自回归与移动平均整合模型(ARI-MA),对3 min左右中维度提出多因素logistic预测模型,15 min构建一种灰色与移动平均整合模型,并分别对预测参数进行估计。通过对10余个车站早晚高峰及平峰不同数据的大量在线实验验证模型的准确性,以北京地铁动物园站为例进行介绍,3

  2. Analysis of real-time vibration data

    Science.gov (United States)

    Safak, E.

    2005-01-01

    In recent years, a few structures have been instrumented to provide continuous vibration data in real time, recording not only large-amplitude motions generated by extreme loads, but also small-amplitude motions generated by ambient loads. The main objective in continuous recording is to track any changes in structural characteristics, and to detect damage after an extreme event, such as an earthquake or explosion. The Fourier-based spectral analysis methods have been the primary tool to analyze vibration data from structures. In general, such methods do not work well for real-time data, because real-time data are mainly composed of ambient vibrations with very low amplitudes and signal-to-noise ratios. The long duration, linearity, and the stationarity of ambient data, however, allow us to utilize statistical signal processing tools, which can compensate for the adverse effects of low amplitudes and high noise. The analysis of real-time data requires tools and techniques that can be applied in real-time; i.e., data are processed and analyzed while being acquired. This paper presents some of the basic tools and techniques for processing and analyzing real-time vibration data. The topics discussed include utilization of running time windows, tracking mean and mean-square values, filtering, system identification, and damage detection.

  3. A systematic review of Internet-based therapy for the treatment of addictions.

    Science.gov (United States)

    Gainsbury, Sally; Blaszczynski, Alex

    2011-04-01

    Traditional therapies for addictions are underutilized and characterized by high attrition rates suggesting they may not meet the needs of a proportion of individuals with addiction-related problems including problem drinking, smoking, substance use and problem gambling. Internet-based therapy has emerged as a new treatment modality for psychological disorders and health issues and this review is the first attempt to summarize and evaluate the evidence of the effectiveness of Internet therapy for addictions. Extensive literature searches were conducted to identify studies meeting the criteria of delivering structured Internet-based treatment programs for addictions that incorporated a component of trained therapist interaction. Only nine studies met criteria for inclusion with seven representing a randomized controlled trial. These included seven papers reporting on tobacco-cessation programs, one Internet-based therapy for pathological gambling, and one treatment program for substance abuse. A range of therapeutic models, treatment components and outcome measures was included across these studies. Positive treatment effects were reported following completion of therapy and at longer-term follow-up. The review concluded that Internet-based therapies for addictions are effective in achieving positive behavioral changes but that more research is required to determine the comparative effectiveness of various Internet-based therapies and their components.

  4. New real time needle segmentation technique using grayscale Hough transformation

    Science.gov (United States)

    Qiu, Wu; Zhou, Hua; Ding, Mingyue; Zhang, Songgeng

    2007-12-01

    Real-time needle segmentation and tracking is very important in image-guided surgery, biopsy, and therapy. In this paper, we described an automated technique to provide real-time needle segmentation from a sequence of 2-D ultrasound images for the use of guidance of a needle to the target in soft tissues. The Hough transform is used to find straight lines or analytic curves in binary image. Hough transform is applied usually to binary images. Hence one needs to convert, initially, the gray level image to a binary one (through thresholding, edge detection, or thinning) in order to apply the HT. While in the process of binarization, some information about line segments in the image may be lost when an inappropriate threshold is used. Gray-Scale Hough Transform can detect the line without binarization. Unfortunately, its high computational cost often prevents it from being applied in real-time applications without the help of specially designed hardware. In this paper, we proposed a needle segmentation technique based on a real-time gray-scale Hough transform. It is composed of an improved Gray Hough Transformation and a coarse-fine search strategy. Furthermore, the RTGHT (Real-Time Gray-Scale Hough Transform) technique is evaluated by patient breast biopsy images. Experiments with patient breast biopsy ultrasound (US) image sequences showed that our approach can segment the biopsy needle in real time (i.e., less than 60 ms) with the angular rms error of about 1° and the position rms error of about 0.5 mm an affordable PC computer without the help of specially designed hardware.

  5. Internet-accessible real-time weather information system

    Digital Repository Service at National Institute of Oceanography (India)

    Desai, R.G.P.; Joseph, A.; Desa, E.; Mehra, P.; Desa, E.; Gouveia, A.D.

    multiple features such as platform-independence, remote configuration and control of the weather stations, data base queries, graphical displays and multi-media presentation capability. The weather information is presented in user-selectable formats...

  6. REAL TIME SYSTEM OPERATIONS 2006-2007

    Energy Technology Data Exchange (ETDEWEB)

    Eto, Joseph H.; Parashar, Manu; Lewis, Nancy Jo

    2008-08-15

    The Real Time System Operations (RTSO) 2006-2007 project focused on two parallel technical tasks: (1) Real-Time Applications of Phasors for Monitoring, Alarming and Control; and (2) Real-Time Voltage Security Assessment (RTVSA) Prototype Tool. The overall goal of the phasor applications project was to accelerate adoption and foster greater use of new, more accurate, time-synchronized phasor measurements by conducting research and prototyping applications on California ISO's phasor platform - Real-Time Dynamics Monitoring System (RTDMS) -- that provide previously unavailable information on the dynamic stability of the grid. Feasibility assessment studies were conducted on potential application of this technology for small-signal stability monitoring, validating/improving existing stability nomograms, conducting frequency response analysis, and obtaining real-time sensitivity information on key metrics to assess grid stress. Based on study findings, prototype applications for real-time visualization and alarming, small-signal stability monitoring, measurement based sensitivity analysis and frequency response assessment were developed, factory- and field-tested at the California ISO and at BPA. The goal of the RTVSA project was to provide California ISO with a prototype voltage security assessment tool that runs in real time within California ISO?s new reliability and congestion management system. CERTS conducted a technical assessment of appropriate algorithms, developed a prototype incorporating state-of-art algorithms (such as the continuation power flow, direct method, boundary orbiting method, and hyperplanes) into a framework most suitable for an operations environment. Based on study findings, a functional specification was prepared, which the California ISO has since used to procure a production-quality tool that is now a part of a suite of advanced computational tools that is used by California ISO for reliability and congestion management.

  7. A formal method to real-time protocol interoperability testing

    Institute of Scientific and Technical Information of China (English)

    WANG ZhiLiang; YIN Xia; JING ChuanMing

    2008-01-01

    Interoperability testing is an important technique to ensure the quality of implementations of network communication protocol. In the next generation Internet protocol, real-time applications should be supported effectively. However, time constraints were not considered in the related studies of protocol interoperability testing, so existing interoperability testing methods are difficult to be applied in real-time protocol interoperability testing. In this paper, a formal method to realtime protocol interoperability testing is proposed. Firstly, a formal model CMpTIOA (communicating multi-port timed input output automata) is defined to specify the system under test (SUT) in real-time protocol interoperability testing; based on this model, timed interoperability relation is then defined. In order to check this relation,a test generation method is presented to generate a parameterized test behavior tree from SUT model; a mechanism of executability pre-determination is also integrated in the test generation method to alleviate state space explosion problem to some extent. The proposed theory and method are then applied in interoperability testing of IPv6 neighbor discovery protocol to show the feasibility of this method.

  8. Wireless communication of real-time ultrasound data and control

    Science.gov (United States)

    Tobias, Richard J.

    2015-03-01

    The Internet of Things (IoT) is expected to grow to 26 billion connected devices by 2020, plus the PC, smart phone, and tablet segment that includes mobile Health (mHealth) connected devices is projected to account for another 7.3 billion units by 2020. This paper explores some of the real-time constraints on the data-flow and control of a wireless connected ultrasound machine. The paper will define an ultrasound server and the capabilities necessary for real-time use of the device. The concept of an ultrasound server wirelessly (or over any network) connected to multiple lightweight clients on devices like an iPad, iPhone, or Android-based tablet, smartphone and other network-attached displays (i.e., Google Glass) is explored. Latency in the ultrasound data stream is one of the key areas to measure and to focus on keeping as small as possible (devices is running in real-time with the operator. The second parameter is the management of bandwidth. At minimum we need to be able to see 20 frames-per- second. It is possible to achieve ultrasound in triplex mode at >20 frames-per-second on a properly configured wireless network. The ultrasound server needs to be designed to accept multiple ultrasound data clients and multiple control clients. A description of the server and some of its key features will be described.

  9. Distance learning and the internet in respiratory therapy education.

    Science.gov (United States)

    Varekojis, Sarah M; Sergakis, Georgianna G; Dunlevy, Crystal L; Foote, Elbie; Clutter, Jill

    2011-11-01

    The profession of respiratory therapy (RT) continues to grow both in number, due to population growth and an ever-increasing aging population, and scope of practice, due to both new and expanded roles and responsibilities in divergent areas of clinical practice. Instructional technology, including distance learning, will probably play a key role in training, educating, and assessing RT students to meet the increasing demand for practitioners. To assess current uses of distance learning and opinions concerning the appropriate use of distance education in RT education programs nationwide. A 13-item on-line survey was designed to collect information about the frequency of use of various types of distance education typically utilized in RT education programs. The survey was sent to directors of 343 Committee on Accreditation for Respiratory Care accredited programs of RT education that offer entry-level or advanced courses of study. The response rate was 50% (169 respondents). Fifty-two percent of the respondents indicated that their courses included some form of on-line learning component. Most directors anticipated that the distance composition of their course offerings will remain unchanged or increase in the near future. Our results indicate that, while distance education plays an important supportive role in RT education, there is still a preference for face-to-face instruction and Internet-facilitated courses among program directors. Program directors continue to view the laboratory and clinical settings as hands-on environments that require instructor supervision in order for students to demonstrate proficiency and critical thinking skills. When used appropriately, distance learning may be an efficient and effective approach to address the many barriers to education faced by the health workforce in general, including budget constraints, overloaded schedules, the need for on-the-job learning opportunities, and lack of access.

  10. The promise and pitfalls of the internet for cognitive behavioral therapy

    Directory of Open Access Journals (Sweden)

    Andersson Gerhard

    2010-12-01

    Full Text Available Abstract Internet-administered cognitive behavior therapy is a promising new way to deliver psychological treatment. There are an increasing number of controlled trials in various fields such as anxiety disorders, mood disorders and health conditions such as headache and insomnia. Among the advantages for the field of cognitive behavior therapy is the dissemination of the treatment, being able to access treatment from a distance, and possibilities to tailor the interventions. To date, studies in which large effects have been obtained have included patient support from a clinician. Recent trials suggest that this support may come from non-clinicians and that therapist effects are minimal. Since studies also suggest that internet-delivered cognitive behavior therapy can be equally effective as face-to-face cognitive behavior therapy, this is a finding that may have implications for CBT practitioners. However, there are other aspects to consider for implementation, as while clinicians may hold positive attitudes towards internet-delivered CBT a recent study suggested that patients are more skeptical and may prefer face-to-face treatment. In the present work, I argue that internet-delivered CBT may help to increase adherence to treatment protocols, that training can be facilitated by means of internet support, and that research on internet interventions can lead to new insights regarding what happens in regular CBT. Moreover, I conclude that internet-delivered CBT works best when support is provided, leaving an important role for clinicians who can incorporate internet treatment in their services. However, I also warn against disseminating internet-delivered CBT to patients for whom it is not suitable, and that clinical skills may suffer if clinicians are trained and practice mainly using the internet.

  11. RIoTBench: A Real-time IoT Benchmark for Distributed Stream Processing Platforms

    OpenAIRE

    Shukla, Anshu; Chaturvedi, Shilpa; Simmhan, Yogesh

    2017-01-01

    The Internet of Things (IoT) is an emerging technology paradigm where millions of sensors and actuators help monitor and manage, physical, environmental and human systems in real-time. The inherent closedloop responsiveness and decision making of IoT applications make them ideal candidates for using low latency and scalable stream processing platforms. Distributed Stream Processing Systems (DSPS) hosted on Cloud data-centers are becoming the vital engine for real-time data processing and anal...

  12. Real-time optoacoustic monitoring of temperature in tissues

    Energy Technology Data Exchange (ETDEWEB)

    Larina, Irina V [Center for Biomedical Engineering, University of Texas Medical Branch, Galveston, TX 77555-0456 (United States); Department of Neuroscience and Cell Biology, University of Texas Medical Branch, Galveston, TX 77555-0456 (United States); Larin, Kirill V [Center for Biomedical Engineering, University of Texas Medical Branch, Galveston, TX 77555-0456 (United States); Esenaliev, Rinat O [Center for Biomedical Engineering, University of Texas Medical Branch, Galveston, TX 77555-0456 (United States); Department of Neuroscience and Cell Biology, University of Texas Medical Branch, Galveston, TX 77555-0456 (United States); Department of Anesthesiology, University of Texas Medical Branch, Galveston, TX 77555-0456 (United States)

    2005-08-07

    To improve the safety and efficacy of thermal therapy, it is necessary to map tissue temperature in real time with submillimetre spatial resolution. Accurate temperature maps may provide the necessary control of the boundaries of the heated regions and minimize thermal damage to surrounding normal tissues. Current imaging modalities fail to monitor tissue temperature in real time with high resolution and accuracy. We investigated a non-invasive optoacoustic method for accurate, real-time monitoring of tissue temperature during thermotherapy. In this study, we induced temperature gradients in tissue and tissue-like samples and monitored the temperature distribution using the optoacoustic technique. The fundamental harmonic of a Q-switched Nd : YAG laser ({lambda} = 1064 nm) was used for optoacoustic wave generation and probing of tissue temperature. The tissue temperature was also monitored with a multi-sensor temperature probe inserted in the samples. Good agreement between optoacoustically measured and actual tissue temperatures was obtained. The accuracy of temperature monitoring was better than 1{sup 0}C, while the spatial resolution was about 1 mm. These data suggest that the optoacoustic technique has the potential to be used for non-invasive, real-time temperature monitoring during thermotherapy.

  13. Interactive Real-time Magnetic Resonance Imaging

    DEFF Research Database (Denmark)

    Brix, Lau

    seeks to implement and assess existing reconstruction algorithms using multi-processors of modern graphics cards and many-core computer processors and to cover some of the potential clinical applications which might benefit from using an interactive real-time MRI system. First an off......-line, but interactive, slice alignment tool was used to support the notion that 3D blood flow quantification in the heart possesses the ability to obtain curves and volumes which are not statistical different from standard 2D flow. Secondly, the feasibility of an interactive real-time MRI system was exploited...... with regard to optimal sampling strategy for detecting motion in four different anatomies on two different MRI scanner brands. A fully implemented interactive real-time MRI system was exploited in a group of healthy fetuses and proved its eligibility as an alternative diagnostic tool for fetal imaging...

  14. Deterministic Real-time Thread Scheduling

    CERN Document Server

    Yun, Heechul; Sha, Lui

    2011-01-01

    Race condition is a timing sensitive problem. A significant source of timing variation comes from nondeterministic hardware interactions such as cache misses. While data race detectors and model checkers can check races, the enormous state space of complex software makes it difficult to identify all of the races and those residual implementation errors still remain a big challenge. In this paper, we propose deterministic real-time scheduling methods to address scheduling nondeterminism in uniprocessor systems. The main idea is to use timing insensitive deterministic events, e.g, an instruction counter, in conjunction with a real-time clock to schedule threads. By introducing the concept of Worst Case Executable Instructions (WCEI), we guarantee both determinism and real-time performance.

  15. Continuous, real time microwave plasma element sensor

    Science.gov (United States)

    Woskov, Paul P.; Smatlak, Donna L.; Cohn, Daniel R.; Wittle, J. Kenneth; Titus, Charles H.; Surma, Jeffrey E.

    1995-01-01

    Microwave-induced plasma for continuous, real time trace element monitoring under harsh and variable conditions. The sensor includes a source of high power microwave energy and a shorted waveguide made of a microwave conductive, refractory material communicating with the source of the microwave energy to generate a plasma. The high power waveguide is constructed to be robust in a hot, hostile environment. It includes an aperture for the passage of gases to be analyzed and a spectrometer is connected to receive light from the plasma. Provision is made for real time in situ calibration. The spectrometer disperses the light, which is then analyzed by a computer. The sensor is capable of making continuous, real time quantitative measurements of desired elements, such as the heavy metals lead and mercury.

  16. Durham adaptive optics real-time controller.

    Science.gov (United States)

    Basden, Alastair; Geng, Deli; Myers, Richard; Younger, Eddy

    2010-11-10

    The Durham adaptive optics (AO) real-time controller was initially a proof of concept design for a generic AO control system. It has since been developed into a modern and powerful central-processing-unit-based real-time control system, capable of using hardware acceleration (including field programmable gate arrays and graphical processing units), based primarily around commercial off-the-shelf hardware. It is powerful enough to be used as the real-time controller for all currently planned 8 m class telescope AO systems. Here we give details of this controller and the concepts behind it, and report on performance, including latency and jitter, which is less than 10 μs for small AO systems.

  17. Real-Time Visualization of Tissue Ischemia

    Science.gov (United States)

    Bearman, Gregory H. (Inventor); Chrien, Thomas D. (Inventor); Eastwood, Michael L. (Inventor)

    2000-01-01

    A real-time display of tissue ischemia which comprises three CCD video cameras, each with a narrow bandwidth filter at the correct wavelength is discussed. The cameras simultaneously view an area of tissue suspected of having ischemic areas through beamsplitters. The output from each camera is adjusted to give the correct signal intensity for combining with, the others into an image for display. If necessary a digital signal processor (DSP) can implement algorithms for image enhancement prior to display. Current DSP engines are fast enough to give real-time display. Measurement at three, wavelengths, combined into a real-time Red-Green-Blue (RGB) video display with a digital signal processing (DSP) board to implement image algorithms, provides direct visualization of ischemic areas.

  18. IoT real time data acquisition using MQTT protocol

    Science.gov (United States)

    Atmoko, R. A.; Riantini, R.; Hasin, M. K.

    2017-05-01

    The Internet of Things (IoT) provides ease to monitor and to gain sensor data through the Internet [1]. The need of high quality data is increasing to the extent that data monitoring and acquisition system in real time is required, such as smart city or telediagnostic in medical areas [2]. Therefore, an appropriate communication protocol is required to resolve these problems. Lately, researchers have developed a lot of communication protocols for IoT, of which each has advantages and disadvantages. This study proposes the utilization of MQTT as a communication protocol, which is one of data communication protocols for IoT. This study used temperature and humidity sensors because the physical parameters are often needed as parameters of environment condition [3]. Data acquisition was done in real-time and stored in MySQL database. This study is also completed by interface web-based and mobile for online monitoring. This result of this study is the enhancement of data quality and reliability using MQTT protocol.

  19. Internet-Delivered Cognitive Behavioral Therapy to Treat Insomnia: A Systematic Review and Meta-Analysis.

    Directory of Open Access Journals (Sweden)

    Michael Seyffert

    Full Text Available Insomnia is of major public health importance. While cognitive behavioral therapy is beneficial, in-person treatment is often unavailable. We assessed the effectiveness of internet-delivered cognitive behavioral therapy for insomnia.The primary objectives were to determine whether online cognitive behavioral therapy for insomnia could improve sleep efficiency and reduce the severity of insomnia in adults. Secondary outcomes included sleep quality, total sleep time, time in bed, sleep onset latency, wake time after sleep onset, and number of nocturnal awakenings.We searched PubMed/MEDLINE, the Cumulative Index to Nursing and Allied Health Literature, PsycInfo, Cochrane Library, Embase, and the Web of Science for randomized trials.Studies were eligible if they were randomized controlled trials in adults that reported application of cognitive behavioral therapy for insomnia via internet delivery. Mean differences in improvement in sleep measures were calculated using the Hartung-Knapp-Sidik-Jonkman method for random effects meta-analysis.We found 15 trials, all utilizing a pretest-posttest randomized control group design. Sleep efficiency was 72% at baseline and improved by 7.2% (95% CI: 5.1%, 9.3%; p<0.001 with internet-delivered cognitive behavioral therapy versus control. Internet-delivered cognitive behavioral therapy resulted in a decrease in the insomnia severity index by 4.3 points (95% CI: -7.1, -1.5; p = 0.017 compared to control. Total sleep time averaged 5.7 hours at baseline and increased by 20 minutes with internet-delivered therapy versus control (95% CI: 9, 31; p = 0.004. The severity of depression decreased by 2.3 points (95% CI: -2.9, -1.7; p = 0.013 in individuals who received internet-delivered cognitive behavioral therapy compared to control. Improvements in sleep efficiency, the insomnia severity index and depression scores with internet-delivered cognitive behavioral therapy were maintained from 4 to 48 weeks after post

  20. Axial Tomography from Digitized Real Time Radiography

    Science.gov (United States)

    Zolnay, A. S.; McDonald, W. M.; Doupont, P. A.; McKinney, R. L.; Lee, M. M.

    1985-01-18

    Axial tomography from digitized real time radiographs provides a useful tool for industrial radiography and tomography. The components of this system are: x-ray source, image intensifier, video camera, video line extractor and digitizer, data storage and reconstruction computers. With this system it is possible to view a two dimensional x-ray image in real time at each angle of rotation and select the tomography plane of interest by choosing which video line to digitize. The digitization of a video line requires less than a second making data acquisition relatively short. Further improvements on this system are planned and initial results are reported.

  1. SignalR real time application development

    CERN Document Server

    Ingebrigtsen, Einar

    2013-01-01

    This step-by-step guide gives you practical advice, tips, and tricks that will have you writing real-time apps quickly and easily.If you are a .NET developer who wants to be at the cutting edge of development, then this book is for you. Real-time application development is made simple in this guide, so as long as you have basic knowledge of .NET, a copy of Visual Studio, and NuGet installed, you are ready to go.

  2. Real-time Shakemap implementation in Austria

    Science.gov (United States)

    Weginger, Stefan; Jia, Yan; Papi Isaba, Maria; Horn, Nikolaus

    2017-04-01

    ShakeMaps provide near-real-time maps of ground motion and shaking intensity following significant earthquakes. They are automatically generated within a few minutes after occurrence of an earthquake. We tested and included the USGS ShakeMap 4.0 (experimental code) based on python in the Antelope real-time system with local modified GMPE and Site Effects based on the conditions in Austria. The ShakeMaps are provided in terms of Intensity, PGA, PGV and PSA. Future presentation of ShakeMap contour lines and Ground Motion Parameter with interactive maps and data exchange over Web-Services are shown.

  3. Real Time Implementation Of Face Recognition System

    Directory of Open Access Journals (Sweden)

    Megha Manchanda

    2014-10-01

    Full Text Available This paper proposes face recognition method using PCA for real time implementation. Nowadays security is gaining importance as it is becoming necessary for people to keep passwords in their mind and carry cards. Such implementations however, are becoming less secure and practical, also is becoming more problematic thus leading to an increasing interest in techniques related to biometrics systems. Face recognition system is amongst important subjects in biometrics systems. This system is very useful for security in particular and has been widely used and developed in many countries. This study aims to achieve face recognition successfully by detecting human face in real time, based on Principal Component Analysis (PCA algorithm.

  4. Real-time systems scheduling fundamentals

    CERN Document Server

    Chetto, Maryline

    2014-01-01

    Real-time systems are used in a wide range of applications, including control, sensing, multimedia, etc.  Scheduling is a central problem for these computing/communication systems since responsible of software execution in a timely manner. This book provides state of knowledge in this domain with special emphasis on the key results obtained within the last decade. This book addresses foundations as well as the latest advances and findings in Real-Time Scheduling, giving all references to important papers. But nevertheless the chapters will be short and not overloaded with confusing details.

  5. Real-time systems scheduling 2 focuses

    CERN Document Server

    Chetto, Maryline

    2014-01-01

    Real-time systems are used in a wide range of applications, including control, sensing, multimedia, etc. Scheduling is a central problem for these computing/communication systems since it is responsible for software execution in a timely manner. This book, the second of two volumes on the subject, brings together knowledge on specific topics and discusses the recent advances for some of them.  It addresses foundations as well as the latest advances and findings in real-time scheduling, giving comprehensive references to important papers, but the chapters are short and not overloaded with co

  6. Real-time elastography of the prostate.

    Science.gov (United States)

    Junker, D; De Zordo, T; Quentin, M; Ladurner, M; Bektic, J; Horniger, W; Jaschke, W; Aigner, F

    2014-01-01

    Palpation of organs is one of the oldest clinical examination techniques, for instance, if you think of the palpation of the breast or the digital rectal examination of the prostate, where hard palpable regions are suspicious for cancer. This is the basic principle of real-time elastography, an ultrasound technique, which is able to visualise tissue elasticity. Since prostate cancer features an increased stiffness due to the higher cell and vessel density than the normal surrounding tissue, real-time elastography has been used for several years for prostate cancer detection. This review introduces the different techniques of ultrasound elastography and furthermore summarises its limitations and potentials.

  7. Real-Time Elastography of the Prostate

    Directory of Open Access Journals (Sweden)

    D. Junker

    2014-01-01

    Full Text Available Palpation of organs is one of the oldest clinical examination techniques, for instance, if you think of the palpation of the breast or the digital rectal examination of the prostate, where hard palpable regions are suspicious for cancer. This is the basic principle of real-time elastography, an ultrasound technique, which is able to visualise tissue elasticity. Since prostate cancer features an increased stiffness due to the higher cell and vessel density than the normal surrounding tissue, real-time elastography has been used for several years for prostate cancer detection. This review introduces the different techniques of ultrasound elastography and furthermore summarises its limitations and potentials.

  8. Implementing a real-time data stream for time-series stellar photometry

    Science.gov (United States)

    Bogosavljevic, M.; Ioannou, Z.

    2016-07-01

    We present a new automated photometric pipeline optimized for time-series photometry that includes a real-time data streaming service. An observer using this resource can automatically stream photometric data over the Internet. Other observers can then monitor the data stream in real time and make an informed decision whether to perform complementary observations of a transient event in progress. Our pipeline uses a modular design so that it can be easily implemented or customized as a real-time robotic telescope pipeline on any observatory. The pipeline is controlled through the user friendly SAOImage DS9 package.

  9. Feedback as Real-Time Constructions

    Science.gov (United States)

    Keiding, Tina Bering; Qvortrup, Ane

    2014-01-01

    This article offers a re-description of feedback and the significance of time in feedback constructions based on systems theory. It describes feedback as internal, real-time constructions in a learning system. From this perspective, feedback is neither immediate nor delayed, but occurs in the very moment it takes place. This article argues for a…

  10. Advances in Real-Time Systems

    CERN Document Server

    Chakraborty, Samarjit

    2012-01-01

    This volume contains the lectures given in honor to Georg Farber as tribute to his contributions in the area of real-time and embedded systems. The chapters of many leading scientists cover a wide range of aspects, like robot or automotive vision systems or medical aspects.

  11. Quantitative real-time imaging of glutathione

    Science.gov (United States)

    Glutathione plays many important roles in biological processes; however, the dynamic changes of glutathione concentrations in living cells remain largely unknown. Here, we report a reversible reaction-based fluorescent probe—designated as RealThiol (RT)—that can quantitatively monitor the real-time ...

  12. The Power of Real-Time PCR

    Science.gov (United States)

    Valasek, Mark A.; Repa, Joyce J.

    2005-01-01

    In recent years, real-time polymerase chain reaction (PCR) has emerged as a robust and widely used methodology for biological investigation because it can detect and quantify very small amounts of specific nucleic acid sequences. As a research tool, a major application of this technology is the rapid and accurate assessment of changes in gene…

  13. Real-time dynamics of proton decay

    CERN Document Server

    Grigoriev, D

    2005-01-01

    Substituting Skyrmion for nucleon, one can potentially see -- in real time -- how the monopole is catalysing the proton (or neutron) decay, and even obtain a plausible estimate for catalysis cross-section. Here we discuss the key aspects of a practical implementation of such approach and demonstrate how one can overcome the main technical problems: Gauss constraint violation and reflections at the boundaries.

  14. Refactoring Real-Time Java Profiles

    DEFF Research Database (Denmark)

    Søndergaard, Hans; Thomsen, Bent; Ravn, Anders Peter

    2011-01-01

    Just like other software, Java profiles benefits from refactoring when they have been used and have evolved for some time. This paper presents a refactoring of the Real-Time Specification for Java (RTSJ) and the Safety Critical Java (SCJ) profile (JSR-302). It highlights core concepts and makes...

  15. Studying Complex Interactions in Real Time

    DEFF Research Database (Denmark)

    2017-01-01

    The study of human behavior must take into account the social context, and real-time, networked experiments with multiple participants is one increasingly popular way to achieve this. In this paper a framework based on Python and XMPP is presented that aims to make it easy to develop such behavio...

  16. Feedback as Real-Time Constructions

    Science.gov (United States)

    Keiding, Tina Bering; Qvortrup, Ane

    2014-01-01

    This article offers a re-description of feedback and the significance of time in feedback constructions based on systems theory. It describes feedback as internal, real-time constructions in a learning system. From this perspective, feedback is neither immediate nor delayed, but occurs in the very moment it takes place. This article argues for a…

  17. Real Time Grid Reliability Management 2005

    Energy Technology Data Exchange (ETDEWEB)

    Eto, Joe; Eto, Joe; Lesieutre, Bernard; Lewis, Nancy Jo; Parashar, Manu

    2008-07-07

    The increased need to manage California?s electricity grid in real time is a result of the ongoing transition from a system operated by vertically-integrated utilities serving native loads to one operated by an independent system operator supporting competitive energy markets. During this transition period, the traditional approach to reliability management -- construction of new transmission lines -- has not been pursued due to unresolved issues related to the financing and recovery of transmission project costs. In the absence of investments in new transmission infrastructure, the best strategy for managing reliability is to equip system operators with better real-time information about actual operating margins so that they can better understand and manage the risk of operating closer to the edge. A companion strategy is to address known deficiencies in offline modeling tools that are needed to ground the use of improved real-time tools. This project: (1) developed and conducted first-ever demonstrations of two prototype real-time software tools for voltage security assessment and phasor monitoring; and (2) prepared a scoping study on improving load and generator response models. Additional funding through two separate subsequent work authorizations has already been provided to build upon the work initiated in this project.

  18. Scene independent real-time indirect illumination

    DEFF Research Database (Denmark)

    Frisvad, Jeppe Revall; Christensen, Niels Jørgen; Falster, Peter

    2005-01-01

    -time rendering of arbitrary dynamic environments and for interactive preview of feature animations. Through DRM we simulate two diffuse reflections of light, but can also, in combination with traditional real-time methods for specular reflections, simulate more complex light paths. DRM is a GPU-based method...

  19. Real time estimates of GDP growth

    NARCIS (Netherlands)

    Groot, de E.A. (Bert); Franses, P.H.P.H.

    2005-01-01

    This paper describes the components of the EICIE, the Econometric Institute Current Indicator of the Economy. This measure concerns quarterly and annual growth of Dutch real Gross Domestic Product. The key component of our real-time forecasting model for Dutch quarterly GDP is weekly staffing servic

  20. Real-time Texture Error Detection

    Directory of Open Access Journals (Sweden)

    Dan Laurentiu Lacrama

    2008-01-01

    Full Text Available This paper advocates an improved solution for the real-time error detection of texture errors that occurs in the production process in textile industry. The research is focused on the mono-color products with 3D texture model (Jacquard fabrics. This is a more difficult task than, for example, 2D multicolor textures.

  1. Refactoring Real-Time Java Profiles

    DEFF Research Database (Denmark)

    Søndergaard, Hans; Thomsen, Bent; Ravn, Anders Peter

    2011-01-01

    Just like other software, Java profiles benefits from refactoring when they have been used and have evolved for some time. This paper presents a refactoring of the Real-Time Specification for Java (RTSJ) and the Safety Critical Java (SCJ) profile (JSR-302). It highlights core concepts and makes...

  2. Real time estimates of GDP growth

    NARCIS (Netherlands)

    E.A. de Groot (Bert); Ph.H.B.F. Franses (Philip Hans)

    2005-01-01

    textabstractThis paper describes the components of the EICIE, the Econometric Institute Current Indicator of the Economy. This measure concerns quarterly and annual growth of Dutch real Gross Domestic Product. The key component of our real-time forecasting model for Dutch quarterly GDP is weekly sta

  3. Real-time analysis of telemetry data

    Science.gov (United States)

    Kao, Simon A.; Laffey, Thomas J.; Schmidt, James L.; Read, Jackson Y.; Dunham, Larry L.

    1987-01-01

    This paper descibes a knowledge-based system for performing real-time monitoring and analysis of telemetry data from the NASA Hubble Space Telescope (HST). In order to handle asynchronous inputs and perform in real time the system consists of three or more separate processes, which run concurrently and communicate via a message passing scheme. The data management process gathers, compresses, and scales the incoming telemetry data befoe sending it to the other tasks. The inferencing process uses the incoming data to perform a real-time analysis of the state and health of the Space Telescope. The I/O process receives telemetry monitors from the data management process, updates its graphical displays in real time, and acts as the interface to the console operator. The three processes may run on the same or different computers. This system is currently under development and is being used to monitor testcases produced by the Bass Telemetry System in the Hardware/Software Integration Facility at Lockheed Missile and Space Co. in Sunnyvale, California.

  4. Real time estimates of GDP growth

    NARCIS (Netherlands)

    Groot, de E.A. (Bert); Franses, P.H.P.H.

    2005-01-01

    This paper describes the components of the EICIE, the Econometric Institute Current Indicator of the Economy. This measure concerns quarterly and annual growth of Dutch real Gross Domestic Product. The key component of our real-time forecasting model for Dutch quarterly GDP is weekly staffing

  5. Real time estimates of GDP growth

    NARCIS (Netherlands)

    E.A. de Groot (Bert); Ph.H.B.F. Franses (Philip Hans)

    2005-01-01

    textabstractThis paper describes the components of the EICIE, the Econometric Institute Current Indicator of the Economy. This measure concerns quarterly and annual growth of Dutch real Gross Domestic Product. The key component of our real-time forecasting model for Dutch quarterly GDP is weekly

  6. Internet-delivered cognitive behavior therapy for anxiety disorders is here to stay

    NARCIS (Netherlands)

    Andrews, Gavin; Newby, Jill M; Williams, Alishia D

    2015-01-01

    Anxiety disorders are common and disabling. Cognitive behavior therapy is the treatment of choice but is often difficult to obtain. Automated, internet-delivered, cognitive behavior therapy (iCBT) courses may be an answer. There are three recent systematic reviews of randomized controlled trials tha

  7. Internet-delivered cognitive behavior therapy for anxiety disorders is here to stay

    NARCIS (Netherlands)

    Andrews, Gavin; Newby, Jill M; Williams, Alishia D

    2015-01-01

    Anxiety disorders are common and disabling. Cognitive behavior therapy is the treatment of choice but is often difficult to obtain. Automated, internet-delivered, cognitive behavior therapy (iCBT) courses may be an answer. There are three recent systematic reviews of randomized controlled trials tha

  8. Frame transformation and geoid undulation transfer to GNSS real time positions through the new RTCM 3.1 transformation messages

    OpenAIRE

    CAPILLA ROMA, RAQUEL; Martín Furones, Ángel Esteban; Anquela Julián, Ana Belén; Berné Valero, José Luis

    2012-01-01

    Radio Technical Commission for Marine Services (RTCM) standardised messages play an important role in real time Global Navigation Satellite Systems (GNSS) applications such as navigation, positioning, civil engineering, surveying, and cartographic or cadastral production. One of the latest agreements on RTCM definitions contains the data fields for real time geodetic reference frame transformation and orthometric heights computation by received geoid undulations via internet pr...

  9. Real-time bus location monitoring using Arduino

    Science.gov (United States)

    Ibrahim, Mohammad Y. M.; Audah, Lukman

    2017-09-01

    The Internet of Things (IoT) is the network of objects, such as a vehicles, mobile devices, and buildings that have electronic components, software, and network connectivity that enable them to collect data, run commands, and be controlled through the Internet. Controlling physical items from the Internet will increase efficiency and save time. The growing number of devices used by people increases the practicality of having IoT devices on the market. The IoT is also an opportunity to develop products that can save money and time and increase work efficiency. Initially, they need more efficiency for real-time bus location systems, especially in university campuses. This system can easily find the accurate locations of and distances between each bus stop and the estimated time to reach a new location. This system has been separated into two parts, which are the hardware and the software. The hardware parts are the Arduino Uno and the Global Positioning System (GPS), while Google Earth and GpsGate are the software parts. The GPS continuously takes input data from the satellite and stores the latitude and longitude values in the Arduino Uno. If we want to track the vehicle, we need to send the longitude and latitude as a message to the Google Earth software to convert these into maps for navigation. Once the Arduino Uno is activated, it takes the last received latitude and longitude positions' values from GpsGate and sends a message to Google Earth. Once the message has been sent to Google Earth, the current location will be shown, and navigation will be activated automatically. Then it will be broadcast using ManyCam, Google+ Hangouts, and YouTube, as well as Facebook, and appear to users. The additional features use Google Forms for determining problems faced by students, who can also take immediate action against the responsible department. Then after several successful simulations, the results will be shown in real time on a map.

  10. [Internet-based approaches in the therapy of eating disorders].

    Science.gov (United States)

    Fichter, M M; Quadflieg, N; Nisslmüller, K; Lindner, S; Voderholzer, U; Wünsch-Leiteritz, W; Osen, B; Huber, T; Zahn, S; Meermann, R; Irrgang, V; Bleichner, F

    2011-09-01

    Recent technological developments of communication media offer new approaches to diagnostic and therapeutic interactions with patients. One major development is Internet-based primary prevention in vulnerable individuals not yet suffering as well as the development of new therapeutic approaches for affected individuals based on the experiences of guided self-help through CD, DVD or bibliotherapy. The eating disorder literature shows several interesting, partly controlled and randomized, studies on bulimia nervosa, a few studies on binge eating disorder and no studies on anorexia nervosa. As part of the German Eating Disorder Network on Psychotherapy (EDNET) a 9-month Internet-based relapse prevention program for patients with anorexia nervosa after inpatient treatment was evaluated. Conception, first experiences and first results of the Internet-based relapse prevention program for anorexia nervosa are reported.

  11. Efficacy of Cognitive Behavioral Therapy for insomnia in adolescents: A randomized controlled trial with internet therapy, group therapy and a waiting list condition

    NARCIS (Netherlands)

    de Bruin, E.J.; Bögels, S.M.; Oort, F.J.; Meijer, A.M.

    2015-01-01

    Study Objectives: To investigate the efficacy of cognitive behavioral therapy for insomnia (CBTI) in adolescents. Design: A randomized controlled trial of CBTI in group therapy (GT), guided internet therapy (IT), and a waiting list (WL), with assessments at baseline, directly after treatment (post-t

  12. Internet-based cognitive behavioral therapy for depression and anxiety in Parkinson's disease — A pilot study

    National Research Council Canada - National Science Library

    Kraepelien, Martin; Svenningsson, Per; Lindefors, Nils; Kaldo, Viktor

    2015-01-01

    .... The availability of evidence-based psychological interventions is low. Objective: This pilot study investigates the feasibility and preliminary effect of internet-based cognitive behavioral therapy (ICBT...

  13. Internet

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    微软想要统治Internet,Windows XP就是这个计划中的一个组成部分。微软已经努力争取提供连接Internet的最方便、最完整的方法。新的操作系统含有Internet Explorer 6(IE6)、新的保密功能以及防火墙保护。Windows XP甚至包含有一个Macromedia Flash播放器插件。但是对Sun微系统公司的打击就是

  14. Multi-family group therapy for adolescent Internet addiction: exploring the underlying mechanisms.

    Science.gov (United States)

    Liu, Qin-Xue; Fang, Xiao-Yi; Yan, Ni; Zhou, Zong-Kui; Yuan, Xiao-Jiao; Lan, Jing; Liu, Chao-Ying

    2015-03-01

    Internet addiction is one of the most common problems among adolescents and effective treatment is needed. This research aims to test the effectiveness and underlying mechanism of multi-family group therapy (MFGT) to reduce Internet addiction among adolescents. A total of 92 participants consisting of 46 adolescents with Internet addiction, aged 12-18years, and 46 their parents, aged 35-46years, were assigned to the experimental group (six-session MFGT intervention) or a waiting-list control. Structured questionnaires were administered at pre-intervention (T1), post-intervention (T2) and a three-month follow-up (T3). There was a significant difference in the decline both in the average score and proportion of adolescents with Internet addiction in MFGT group at post-intervention (MT1=3.40, MT2=2.46, pInternet use was partially explained by the satisfaction of their psychological needs and improved parent-adolescent communication and closeness. The six-session multi-family group therapy was effective in reducing Internet addiction behaviors among adolescents and could be implemented as part of routine primary care clinic services in similar populations. As family support system is critical in maintaining the intervention effect, fostering positive parent-adolescent interaction and addressing adolescents' psychological needs should be included in preventive programs for Internet addiction in the future. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. [The therapeutic alliance in internet-based therapy procedures: an overview].

    Science.gov (United States)

    Klasen, M; Knaevelsrud, C; Böttche, M

    2013-07-01

    There has been an increased use of modern information and communication technology in healthcare services in recent years; however, little is yet known about the nature of the therapeutic alliance in internet-based interventions. This review aims to give a systematic overview of controlled evaluation studies with a focus on the nature and impact of the therapeutic alliance in internet-based interventions available to date. The results of internet-based randomized controlled trials indicate that a positive therapeutic alliance can be established regardless of the medium of communication. The therapeutic alliance was rated equally satisfying as in conventional face-to-face therapy.

  16. System Equivalent for Real Time Digital Simulator

    Science.gov (United States)

    Lin, Xi

    2011-07-01

    The purpose of this research is to develop a method of making system equivalents for the Real Time Digital Simulator (RTDS), which should enhance its capability of simulating large power systems. The proposed equivalent combines a Frequency Dependent Network Equivalent (FDNE) for the high frequency electromagnetic transients and a Transient Stability Analysis (TSA) type simulation block for the electromechanical transients. The frequency dependent characteristic for FDNE is obtained by curve-fitting frequency domain admittance characteristics using the Vector Fitting method. An approach for approximating the frequency dependent characteristic of large power networks from readily available typical power-flow data is also introduced. A new scheme of incorporating TSA solution in RTDS is proposed. This report shows how the TSA algorithm can be adapted to a real time platform. The validity of this method is confirmed with examples, including the study of a multi in-feed HVDC system based network.

  17. Real time processor for array speckle interferometry

    Science.gov (United States)

    Chin, Gordon; Florez, Jose; Borelli, Renan; Fong, Wai; Miko, Joseph; Trujillo, Carlos

    1989-01-01

    The authors are constructing a real-time processor to acquire image frames, perform array flat-fielding, execute a 64 x 64 element two-dimensional complex FFT (fast Fourier transform) and average the power spectrum, all within the 25 ms coherence time for speckles at near-IR (infrared) wavelength. The processor will be a compact unit controlled by a PC with real-time display and data storage capability. This will provide the ability to optimize observations and obtain results on the telescope rather than waiting several weeks before the data can be analyzed and viewed with offline methods. The image acquisition and processing, design criteria, and processor architecture are described.

  18. Real Time Radiation Exposure And Health Risks

    Science.gov (United States)

    Hu, Shaowen; Barzilla, Janet E.; Semones, Edward J.

    2015-01-01

    Radiation from solar particle events (SPEs) poses a serious threat to future manned missions outside of low Earth orbit (LEO). Accurate characterization of the radiation environment in the inner heliosphere and timely monitoring the health risks to crew are essential steps to ensure the safety of future Mars missions. In this project we plan to develop an approach that can use the particle data from multiple satellites and perform near real-time simulations of radiation exposure and health risks for various exposure scenarios. Time-course profiles of dose rates will be calculated with HZETRN and PDOSE from the energy spectrum and compositions of the particles archived from satellites, and will be validated from recent radiation exposure measurements in space. Real-time estimation of radiation risks will be investigated using ARRBOD. This cross discipline integrated approach can improve risk mitigation by providing critical information for risk assessment and medical guidance to crew during SPEs.

  19. Real-Time Watercolor for Animation

    Institute of Scientific and Technical Information of China (English)

    Thomas Luft; Oliver Deussen

    2006-01-01

    We present algorithms that allow for real-time rendering of 3D-scenes with a watercolor painting appearance. Our approach provides an appropriate simplification of the visual complexity, imitates characteristic natural effects of watercolor, and provides two essential painting techniques: the wet-on-wet and the wet-on-dry painting. We concentrate on efficient algorithms based on image space processing rather than on an exact simulation. This allows for the real-time rendering of 3D-scenes. During an animation a high frame-to-frame coherence can be achieved due to a stable segmentation scheme. Finally, we seamlessly integrate a smooth illumination into the watercolor renderings using information from the 3D-scene.

  20. Monte Carlo study of real time dynamics

    CERN Document Server

    Alexandru, Andrei; Bedaque, Paulo F; Vartak, Sohan; Warrington, Neill C

    2016-01-01

    Monte Carlo studies involving real time dynamics are severely restricted by the sign problem that emerges from highly oscillatory phase of the path integral. In this letter, we present a new method to compute real time quantities on the lattice using the Schwinger-Keldysh formalism via Monte Carlo simulations. The key idea is to deform the path integration domain to a complex manifold where the phase oscillations are mild and the sign problem is manageable. We use the previously introduced "contraction algorithm" to create a Markov chain on this alternative manifold. We substantiate our approach by analyzing the quantum mechanical anharmonic oscillator. Our results are in agreement with the exact ones obtained by diagonalization of the Hamiltonian. The method we introduce is generic and in principle applicable to quantum field theory albeit very slow. We discuss some possible improvements that should speed up the algorithm.

  1. Real time PCR. Application in dengue studies

    Directory of Open Access Journals (Sweden)

    Jeanette Prada-Arismendy

    2011-06-01

    Full Text Available PCR (polymerase chain reaction is a routinely used tool in every diagnostic and research laboratory. This technique has been used in detection of mutations and pathogens, forensic investigation, and even is the base tool for human genome sequencing. A modification of PCR technique, real time PCR, allows the quantification of nucleic acids with higher sensibility, specificity and reproducibility. This article is intended to clarify the foundations of real-time PCR, using an application model for virology. In the actual work, it was quantified the viral load of dengue virus serotype 2 produced from infected murine macrophages; the obtained results in this work established that murine strain BALB/c presents a greater susceptibility to dengue virus infection, which establishes BALB/c murine strain as a best model of study for investigation of dengue virus infection physiopathology.

  2. AMON: Transition to real-time operations

    Science.gov (United States)

    Cowen, D. F.; Keivani, A.; Tešić, G.

    2016-04-01

    The Astrophysical Multimessenger Observatory Network (AMON) will link the world's leading high-energy neutrino, cosmic-ray, gamma-ray and gravitational wave observatories by performing real-time coincidence searches for multimessenger sources from observatories' subthreshold data streams. The resulting coincidences will be distributed to interested parties in the form of electronic alerts for real-time follow-up observation. We will present the science case, design elements, current and projected partner observatories, status of the AMON project, and an initial AMON-enabled analysis. The prototype of the AMON server has been online since August 2014 and processing archival data. Currently, we are deploying new high-uptime servers and will be ready to start issuing alerts as early as winter 2015/16.

  3. Collecting data in real time with postcards

    DEFF Research Database (Denmark)

    2013-01-01

    The success of information technology (IT) in transforming healthcare is often limited by the lack of clear understanding of the context at which the technology is used. Various methods have been proposed to understand healthcare context better in designing and implementing Health Information...... Systems. These methods often involve cross-sectional, retrospective data collection. This paper describes the postcard method for prospective real-time data collection, both in paper format and electronic format. This paper then describes the results obtained using postcard techniques in Denmark...... and Australia. The benefits of this technique are illustrated. There are limitations in using postcard techniques and this paper provides a detail discussion about these limitations. Postcard techniques provide unique advantages in understanding real time healthcare context and it is an important technique...

  4. Real Time Radiation Monitoring Using Nanotechnology

    Science.gov (United States)

    Li, Jing (Inventor); Wilkins, Richard T. (Inventor); Hanratty, James J. (Inventor); Lu, Yijiang (Inventor)

    2016-01-01

    System and method for monitoring receipt and estimating flux value, in real time, of incident radiation, using two or more nanostructures (NSs) and associated terminals to provide closed electrical paths and to measure one or more electrical property change values .DELTA.EPV, associated with irradiated NSs, during a sequence of irradiation time intervals. Effects of irradiation, without healing and with healing, of the NSs, are separately modeled for first order and second order healing. Change values.DELTA.EPV are related to flux, to cumulative dose received by NSs, and to radiation and healing effectivity parameters and/or.mu., associated with the NS material and to the flux. Flux and/or dose are estimated in real time, based on EPV change values, using measured .DELTA.EPV values. Threshold dose for specified changes of biological origin (usually undesired) can be estimated. Effects of time-dependent radiation flux are analyzed in pre-healing and healing regimes.

  5. Real time gamma-ray signature identifier

    Science.gov (United States)

    Rowland, Mark [Alamo, CA; Gosnell, Tom B [Moraga, CA; Ham, Cheryl [Livermore, CA; Perkins, Dwight [Livermore, CA; Wong, James [Dublin, CA

    2012-05-15

    A real time gamma-ray signature/source identification method and system using principal components analysis (PCA) for transforming and substantially reducing one or more comprehensive spectral libraries of nuclear materials types and configurations into a corresponding concise representation/signature(s) representing and indexing each individual predetermined spectrum in principal component (PC) space, wherein an unknown gamma-ray signature may be compared against the representative signature to find a match or at least characterize the unknown signature from among all the entries in the library with a single regression or simple projection into the PC space, so as to substantially reduce processing time and computing resources and enable real-time characterization and/or identification.

  6. "Fast" Is Not "Real-Time": Designing Effective Real-Time AI Systems

    Science.gov (United States)

    O'Reilly, Cindy A.; Cromarty, Andrew S.

    1985-04-01

    Realistic practical problem domains (such as robotics, process control, and certain kinds of signal processing) stand to benefit greatly from the application of artificial intelligence techniques. These problem domains are of special interest because they are typified by complex dynamic environments in which the ability to select and initiate a proper response to environmental events in real time is a strict prerequisite to effective environmental interaction. Artificial intelligence systems developed to date have been sheltered from this real-time requirement, however, largely by virtue of their use of simplified problem domains or problem representations. The plethora of colloquial and (in general) mutually inconsistent interpretations of the term "real-time" employed by workers in each of these domains further exacerbates the difficul-ties in effectively applying state-of-the-art problem solving tech-niques to time-critical problems. Indeed, the intellectual waters are by now sufficiently muddied that the pursuit of a rigorous treatment of intelligent real-time performance mandates the redevelopment of proper problem perspective on what "real-time" means, starting from first principles. We present a simple but nonetheless formal definition of real-time performance. We then undertake an analysis of both conventional techniques and AI technology with respect to their ability to meet substantive real-time performance criteria. This analysis provides a basis for specification of problem-independent design requirements for systems that would claim real-time performance. Finally, we discuss the application of these design principles to a pragmatic problem in real-time signal understanding.

  7. Real-time optical information processing

    CERN Document Server

    Javidi, Bahram

    1994-01-01

    Real-Time Optical Information Processing covers the most recent developments in optical information processing, pattern recognition, neural computing, and materials for devices in optical computing. Intended for researchers and graduate students in signal and information processing with some elementary background in optics, the book provides both theoretical and practical information on the latest in information processing in all its aspects. Leading researchers in the field describe the significant signal processing algorithms architectures in optics as well as basic hardware concepts,

  8. Real-Time Neutron Radiography at CARR

    Institute of Scientific and Technical Information of China (English)

    HE; Lin-feng; HAN; Song-bai; WANG; Hong-li; WU; Mei-mei; WEI; Guo-hai; WANG; Yu

    2012-01-01

    <正>A real-time detector system for neutron radiography based on CMOS camera has been designed for the thermal neutron imaging facility under construction at China Advanced Research Reactor (CARR). This system is equipped with a new scientific CMOS camera with 5.5 million pixels and speed up to 100 fps at full frame. The readout noise is less than 2.4 electron per pixel. It is capable of providing

  9. Robust synthesis for real-time systems

    DEFF Research Database (Denmark)

    Larsen, Kim Guldstrand; Legay, Axel; Traonouez, Louis-Marie;

    2014-01-01

    Specification theories for real-time systems allow reasoning about interfaces and their implementation models, using a set of operators that includes satisfaction, refinement, logical and parallel composition. To make such theories applicable throughout the entire design process from an abstract ...... strategies in timed games. Finally, we consider the parametric robustness problem and propose a counter-example refinement heuristic for computing safe perturbation values....

  10. Real-time RGBD SLAM system

    Science.gov (United States)

    Czupryński, BłaŻej; Strupczewski, Adam

    2015-09-01

    A real-time tracking and mapping SLAM system is presented. The developed system uses input from an RGBD sensor and tracks the camera pose from frame to frame. The tracking is based on matched feature points and is performed with respect to selected keyframes. The system is robust and scalable, as an arbitrary number of keyframes can be chosen for visualization and tracking depending on the desired accuracy and speed. The presented system is also a good platform for further research.

  11. Boundary Correct Real-Time Soft Shadows

    DEFF Research Database (Denmark)

    Jacobsen, Bjarke; Christensen, Niels Jørgen; Larsen, Bent Dalgaard

    2004-01-01

    This paper describes a method to determine correct shadow boundaries from an area light source using umbra and penumbra volumes. The light source is approximated by a circular disk as this gives a fast way to extrude the volumes. The method also gives a crude estimate of the visibility of the are...... for implementation on most programmable hardware. Though some crude approximations are used in the visibility function, the method can be used to produce soft shadows with correct boundaries in real time....

  12. Real Time Route for Dynamic Road Congestions

    Directory of Open Access Journals (Sweden)

    A. M. Riad

    2012-05-01

    Full Text Available Minimizing service delivery and travel time during rush hours downtown is strategic target for several organizations, especially the emergency organizations. This paper presents an On-line and Real-time Dynamic Route System (ORDRS which benefits from the advantages and integration between information system and communications technology. It utilizes Global Positioning System (GPS, Geographical Information Systems (GIS, and Global System for Mobile communications (GSM; for producing the real time routes for vehicles. GPS-Tracker is the main input device for ORDRS. It is fixated in a vehicle, sends vehicle's movement data (Geo-info to the control center wirelessly through either Short Message Service (SMS or General Packet Radio Service (GPRS. Geo-info includes time, date, longitude, latitude, speed, and etc., these data is classified over time during weekdays into interval time slices, each slice is 30 minutes. Speeds are treated by GIS tools to determine historical and real time speeds for each street segment in the road network which is being used for calculating time impedance (cost matrix for each street segment dynamically. ORDRS uses a cost matrix of the current time slice for determining the best route to each vehicle in duty attached. Several algorithms was used to calculate the shortest route, a comparison between Dijekstra and Yen algorithms was studied.

  13. The IGS Real-Time Service

    Science.gov (United States)

    Caissy, Mark; Agrotis, Loukis; Weber, Georg; Fisher, Steven

    2013-04-01

    The IGS Real-Time Service (RTS) is being rolled out in 2013 following the successful completion of the IGS Real-Time Pilot Project. The RTS has recently completed beta testing and is now operating at the level of initial operating capability. The service will reach full operating capability by the end of 2013. RTS products include GNSS data streams and GNSS orbit and clock correction streams. These products are available in real-time in accordance with the IGS open-data policy using RTCM standard formats and the NTRIP transportation protocol. The RTS is key to IGS's support of the GGOS Natural Hazards theme. Of particular importance in this context is the high degree of redundancy that is build into the RTS in order to reliably support public-good scientific applications commonly associated with natural hazards; for example, precise-point positioning applications requiring high accuracy and low latency related to earthquakes and tsunamis . This presentation will illustrate the data gathering through product generation to user distribution design of the RTS, highlighting built-in robustness at various stages. The presentation will also present an assessment of the performance of the service to date.

  14. Real-time Interactive Tree Animation.

    Science.gov (United States)

    Quigley, Ed; Yu, Yue; Huang, Jingwei; Lin, Winnie; Fedkiw, Ronald

    2017-01-30

    We present a novel method for posing and animating botanical tree models interactively in real time. Unlike other state of the art methods which tend to produce trees that are overly flexible, bending and deforming as if they were underwater plants, our approach allows for arbitrarily high stiffness while still maintaining real-time frame rates without spurious artifacts, even on quite large trees with over ten thousand branches. This is accomplished by using an articulated rigid body model with as-stiff-as-desired rotational springs in conjunction with our newly proposed simulation technique, which is motivated both by position based dynamics and the typical O(N) algorithms for articulated rigid bodies. The efficiency of our algorithm allows us to pose and animate trees with millions of branches or alternatively simulate a small forest comprised of many highly detailed trees. Even using only a single CPU core, we can simulate ten thousand branches in real time while still maintaining quite crisp user interactivity. This has allowed us to incorporate our framework into a commodity game engine to run interactively even on a low-budget tablet. We show that our method is amenable to the incorporation of a large variety of desirable effects such as wind, leaves, fictitious forces, collisions, fracture, etc.

  15. Real-time mosaicing of fetoscopic videos using SIFT

    Science.gov (United States)

    Daga, Pankaj; Chadebecq, François; Shakir, Dzhoshkun I.; Herrera, Luis Carlos G.; Tella, Marcel; Dwyer, George; David, Anna L.; Deprest, Jan; Stoyanov, Danail; Vercauteren, Tom; Ourselin, Sebastien

    2016-03-01

    Fetoscopic laser photo-coagulation of the placental vascular anastomoses remains the most effective therapy for twin-to-twin transfusion syndrome (TTTS) in monochorionic twin pregnancies. However, to ensure the success of the intervention, complete photo-coagulation of all anastomoses is needed. This is made difficult by the limited field of view of the fetoscopic video guidance, which hinders the surgeon's ability to locate all the anastomoses. A potential solution to this problem is to expand the field of view of the placental surface by creating a mosaic from overlapping fetoscopic images. This mosaic can then be used for anastomoses localization and spatial orientation during surgery. However, this requires accurate and fast algorithms that can operate within the real-time constraints of fetal surgery. In this work, we present an image mosaicing framework that leverages the parallelism of modern GPUs and can process clinical fetoscopic images in real-time. Initial qualitative results on ex-vivo placental images indicate that the proposed framework can generate clinically useful mosaics from fetoscopic videos in real-time.

  16. Real-time data standards for the planetarium

    Science.gov (United States)

    Abbott, B.

    2008-06-01

    The American Museum of Natural History and the Hayden Planetarium have built the most accurate, comprehensive, 3-D atlas of the cosmos called the Digital Universe (DU). The DU enables one to journey from the mountains on Earth to the farthest quasars. The DU enjoys many distribution channels, including pre-rendered space-shows and news bulletins, live planetarium programmes, and a free version available on the internet. Recently, we have partnered with three planetarium vendors to bring the DU to planetariums around the world. These partnerships necessitatethe adoption or creation of standards for three-dimensional data and associated metadata. Many standards exist in the current Virtual Observatory framework and additional standards are being proposed as part of the VAMP programme. We intend to identify additional standards necessary for 3-D, real-time rendering tools for fulldome and flat-screen environments.

  17. Real-time numerical simulation of the Carnot cycle

    Science.gov (United States)

    Hurkala, J.; Gall, M.; Kutner, R.; Maciejczyk, M.

    2005-09-01

    We developed a highly interactive, multi-windows Java applet which made it possible to simulate and visualize within any platform and internet the Carnot cycle (or engine) in a real-time computer experiment. We extended our previous model and algorithm (Galant et al 2003 Heat Transfer, Newton's Law of Cooling and the Law of Entropy Increase Simulated by the Real-Time Computer Experiments in Java (Lecture Notes in Computer Science vol 2657) pp 45-53, Gall and Kutner 2005 Molecular mechanisms of heat transfer: Debye relaxation versus power-law Physica A 352 347-78) to simulate not only the heat flow but also the macroscopic movement of the piston. Since in reality it is impossible to construct a reversible Carnot engine, the question arises whether it is possible to simulate it at least in a numerical experiment? The positive answer to this question which we found is related to our model and algorithm which make it possible to omit the many-body problem arising when many gas particles simultaneously interact with the mobile piston. As usual, the considerations of phenomenological thermodynamics began with a study of the basic properties of heat engines, hence our approach, besides intrinsic physical significance, is also important from the educational, technological and even environmental points of view. .

  18. Network Based Real Time Condition Monitoring of Rotating Machinery

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    This paper presents the development of a network based real time condition monitoring system of rotating machinery. The system is built up in a double net structure consisting of local net (including client and server) and intranet. The client serves as a field data collector and processor that samples the vibration signals and process parameters of a machine monitored in the net and processes the sampled data. The data collected by the client are transmitted to the server that processes the data further and provides the results of the diagnosis of each machine to any distant terminals through intranet or internet. Such a structure of the monitoring system is advantageous in safety, reliability and reasonably shares the existing net resources. In order to ensure real time transmission of the data, two procedures of data transmission, virtual channel and data pool, are developed and applied in the monitoring system. The experimental results show that the monitoring system works well and is suitable to monitor a large group of rotating machines.

  19. A paper based inkjet printed real time location tracking TAG

    KAUST Repository

    Farooqui, Muhammad Fahad

    2013-06-01

    This paper presents, for the first time, an inkjet printed, wearable, low-cost, light weight and miniaturized real time locating TAG on an ordinary photo-paper. The 29 grams, 9 cm×8 cm×0.5 cm TAG integrates a GPS/GSM module, a microcontroller with on-paper GPS and GSM antennas. A novel monopole antenna with an L shaped slit is introduced to achieve the required circular polarization for the GPS band. Issues related to integration of active components (e.g. BGA chip) on inkjet-printed paper substrates are discussed. The system enables location tracking through a user-friendly interface accessible through all internet enabled devices. Field tests show an update interval of 15 sec, stationary position error of 6.2m and real time tracking error of 4.7m which is 4 times better than the state-of-the-art. Due to the flexible nature of the paper substrate, the TAG can be designed for different shapes such as a wrist band for child tracking or a collar band for pet tracking applications. © 2013 IEEE.

  20. The Internet as a Telephone Network.

    Science.gov (United States)

    DeMillo, Richard A.

    1998-01-01

    Some Internet technologists predict that Internet telephony will topple the Public Switched Telephone Network (PSTN) and become the next telephone network. This article examines Internet telephony (real-time and non-real-time communications); its potential for integrating wireline, wireless, and Internet network services; and factors determining…

  1. Distance Learning between German and Japanese School Classes Based on a Real Time Video Conference Environment.

    Science.gov (United States)

    Graf, Klaus-D.

    We have established an environment for German-Japanese school education projects using real time interactive audio-visual distance learning between remote classrooms. In periods of 8-12 weeks, two classes are dealing with the same subject matter, exchanging materials and results via e-mail and Internet. At 3 or 4 occasions the classes met on…

  2. Exploring Earthquakes in Real-Time

    Science.gov (United States)

    Bravo, T. K.; Kafka, A. L.; Coleman, B.; Taber, J. J.

    2013-12-01

    Earthquakes capture the attention of students and inspire them to explore the Earth. Adding the ability to view and explore recordings of significant and newsworthy earthquakes in real-time makes the subject even more compelling. To address this opportunity, the Incorporated Research Institutions for Seismology (IRIS), in collaboration with Moravian College, developed ';jAmaSeis', a cross-platform application that enables students to access real-time earthquake waveform data. Students can watch as the seismic waves are recorded on their computer, and can be among the first to analyze the data from an earthquake. jAmaSeis facilitates student centered investigations of seismological concepts using either a low-cost educational seismograph or streamed data from other educational seismographs or from any seismic station that sends data to the IRIS Data Management System. After an earthquake, students can analyze the seismograms to determine characteristics of earthquakes such as time of occurrence, distance from the epicenter to the station, magnitude, and location. The software has been designed to provide graphical clues to guide students in the analysis and assist in their interpretations. Since jAmaSeis can simultaneously record up to three stations from anywhere on the planet, there are numerous opportunities for student driven investigations. For example, students can explore differences in the seismograms from different distances from an earthquake and compare waveforms from different azimuthal directions. Students can simultaneously monitor seismicity at a tectonic plate boundary and in the middle of the plate regardless of their school location. This can help students discover for themselves the ideas underlying seismic wave propagation, regional earthquake hazards, magnitude-frequency relationships, and the details of plate tectonics. The real-time nature of the data keeps the investigations dynamic, and offers students countless opportunities to explore.

  3. Real-time image and video processing

    CERN Document Server

    Kehtarnavaz, Nasser

    2006-01-01

    This book presents an overview of the guidelines and strategies for transitioning an image or video processing algorithm from a research environment into a real-time constrained environment. Such guidelines and strategies are scattered in the literature of various disciplines including image processing, computer engineering, and software engineering, and thus have not previously appeared in one place. By bringing these strategies into one place, the book is intended to serve the greater community of researchers, practicing engineers, industrial professionals, who are interested in taking an im

  4. Linear Regression Based Real-Time Filtering

    Directory of Open Access Journals (Sweden)

    Misel Batmend

    2013-01-01

    Full Text Available This paper introduces real time filtering method based on linear least squares fitted line. Method can be used in case that a filtered signal is linear. This constraint narrows a band of potential applications. Advantage over Kalman filter is that it is computationally less expensive. The paper further deals with application of introduced method on filtering data used to evaluate a position of engraved material with respect to engraving machine. The filter was implemented to the CNC engraving machine control system. Experiments showing its performance are included.

  5. Object detection in real-time

    Science.gov (United States)

    Solder, Ulrich; Graefe, Volker

    1991-03-01

    An algorithm working on monocular gray-scale image sequences for object detection combined with a road tracker is presented. This algorithm appropriate for the real-time demands of an autonomous car driving with speeds over 40 km/h may be used for triggering obstacle avoidance maneuvers such as coming to a safe stop automatically in front of an obstacle or following another car. Moving and static objects have been detected in real-world experiments on various types of roads even under unfavorable weather conditions. . Morgenthaler and

  6. CUDA-based real time surgery simulation.

    Science.gov (United States)

    Liu, Youquan; De, Suvranu

    2008-01-01

    In this paper we present a general software platform that enables real time surgery simulation on the newly available compute unified device architecture (CUDA)from NVIDIA. CUDA-enabled GPUs harness the power of 128 processors which allow data parallel computations. Compared to the previous GPGPU, it is significantly more flexible with a C language interface. We report implementation of both collision detection and consequent deformation computation algorithms. Our test results indicate that the CUDA enables a twenty times speedup for collision detection and about fifteen times speedup for deformation computation on an Intel Core 2 Quad 2.66 GHz machine with GeForce 8800 GTX.

  7. Real-time inclinometer using accelerometer MEMS

    CERN Document Server

    Hanto, D; Hermanto, B; Puranto, P; Handoko, L T

    2011-01-01

    A preliminary design of inclinometer for real-time monitoring system of soil displacement is proposed. The system is developed using accelerometer sensor with microelectromechanical system (MEMS) device. The main apparatus consists of a single MEMS sensor attached to a solid pipe and stucked pependicularly far away below the soil surface. The system utilizes small fractions of electrical signals from MEMS sensor induced by the pipe inclination due to soil displacements below the surface. It is argued that the system is accurate enough to detect soil displacements responsible for landslides, and then realizes a simple and low cost landslide early warning system.

  8. Systems Analyze Water Quality in Real Time

    Science.gov (United States)

    2010-01-01

    A water analyzer developed under Small Business Innovation Research (SBIR) contracts with Kennedy Space Center now monitors treatment processes at water and wastewater facilities around the world. Originally designed to provide real-time detection of nutrient levels in hydroponic solutions for growing plants in space, the ChemScan analyzer, produced by ASA Analytics Inc., of Waukesha, Wisconsin, utilizes spectrometry and chemometric algorithms to automatically analyze multiple parameters in the water treatment process with little need for maintenance, calibration, or operator intervention. The company has experienced a compound annual growth rate of 40 percent over its 15-year history as a direct result of the technology's success.

  9. Testing Real-Time Systems Using UPPAAL

    DEFF Research Database (Denmark)

    Hessel, Anders; Larsen, Kim Guldstrand; Mikucionis, Marius

    2008-01-01

    This chapter presents principles and techniques for model-based black-box conformance testing of real-time systems using the Uppaal model-checking tool-suite. The basis for testing is given as a network of concurrent timed automata specified by the test engineer. Relativized input....../output conformance serves as the notion of implementation correctness, essentially timed trace inclusion taking environment assumptions into account. Test cases can be generated offline and later executed, or they can be generated and executed online. For both approaches this chapter discusses how to specify test...... objectives, derive test sequences, apply these to the system under test, and assign a verdict....

  10. Real-time detection of gravitational microlensing

    CERN Document Server

    Pratt, M R; Axelrod, T S; Becker, A; Bennett, D P; Cook, K H; Freeman, K C; Griest, K; Guern, J A; Lehner, M; Marshall, S L; Peterson, B A; Quinn, P J; Reiss, D; Rodgers, A W; Stubbs, C W; Sutherland, W; Welch, D

    1995-01-01

    Real-time detection of microlensing has moved from proof of concept in 1994 to a steady stream of events this year. Global dissemination of these events by the MACHO and OGLE collaborations has made possible intensive photometric and spectroscopic followup from widely dispersed sites confirming the microlensing hypothesis. Improved photometry and increased temporal resolution from followup observations greatly increases the possibility of detecting deviations from the standard point-source, point-lens, inertial motion microlensing model. These deviations are crucial in understanding individual lensing systems by breaking the degeneracy between lens mass, position and velocity. We report here on GMAN (Global Microlensing Alert Network), the coordinated followup of MACHO alerts.

  11. Low cost real time interactive analysis system

    Science.gov (United States)

    Stetina, F.

    1988-01-01

    Efforts continue to develop a low cost real time interactive analysis system for the reception of satellite data. A multi-purpose ingest hardware software frame formatter was demonstrated for GOES and TIROS data and work is proceeding on extending the capability to receive GMS data. A similar system was proposed as an archival and analysis system for use with INSAT data and studies are underway to modify the system to receive the planned SeaWiFS (ocean color) data. This system was proposed as the core of a number of international programs in support of U.S. AID activities. Systems delivered or nearing final testing are listed.

  12. An open real-time tele-stethoscopy system

    Directory of Open Access Journals (Sweden)

    Foche-Perez Ignacio

    2012-08-01

    Full Text Available Abstract Background Acute respiratory infections are the leading cause of childhood mortality. The lack of physicians in rural areas of developing countries makes difficult their correct diagnosis and treatment. The staff of rural health facilities (health-care technicians may not be qualified to distinguish respiratory diseases by auscultation. For this reason, the goal of this project is the development of a tele-stethoscopy system that allows a physician to receive real-time cardio-respiratory sounds from a remote auscultation, as well as video images showing where the technician is placing the stethoscope on the patient’s body. Methods A real-time wireless stethoscopy system was designed. The initial requirements were: 1 The system must send audio and video synchronously over IP networks, not requiring an Internet connection; 2 It must preserve the quality of cardiorespiratory sounds, allowing to adapt the binaural pieces and the chestpiece of standard stethoscopes, and; 3 Cardiorespiratory sounds should be recordable at both sides of the communication. In order to verify the diagnostic capacity of the system, a clinical validation with eight specialists has been designed. In a preliminary test, twelve patients have been auscultated by all the physicians using the tele-stethoscopy system, versus a local auscultation using traditional stethoscope. The system must allow listen the cardiac (systolic and diastolic murmurs, gallop sound, arrhythmias and respiratory (rhonchi, rales and crepitations, wheeze, diminished and bronchial breath sounds, pleural friction rub sounds. Results The design, development and initial validation of the real-time wireless tele-stethoscopy system are described in detail. The system was conceived from scratch as open-source, low-cost and designed in such a way that many universities and small local companies in developing countries may manufacture it. Only free open-source software has been used in order to

  13. Real Time PCR: Principles and Application

    Directory of Open Access Journals (Sweden)

    Safie Amini

    2005-09-01

    Full Text Available The polymerase chain reaction (PCR has been used as the new golden standard for detecting a wide variety of templates across a range of scientific specialties and also as an essential tool in research laboratories. PCR has completely revolutionized the detection of RNA and DNA viruses(1. Real Time vs. Traditional PCRReal time chemistry allows the detection of PCR amplification during the early phase of the reaction. Measuring the kinetic of the reaction in the early phase of PCR provides a distinct advantage over traditional PCR detection. Traditional methods use agarose gel electrophoresis for detection of PCR amplification at the final phase or end point. End point detection is really time consuming; it takes several hours to have the result. On the other hand, results are based on size discrimination. Also, the result of end point is variable from sample to sample. While gels may not resolve this variability in yield, real time PCR is sensitive enough to detect this change.Some problems with end point detection are: poor precision, low sensitivity, short dynamic range (<2 log, low resolution, non-automated procedure, size-based discrimination only, and post PCR processing (carry-over contamination and results are not expressed as numbers(2.Detection of PCR Products in Real-timeReal-time PCR and RT-PCR allow accurate quantification of starting amounts of DNA, cDNA, and RNA targets. Fluorescence is measured during each cycle, which greatly increases the dynamic range of the reaction since the amount offluorescence is proportional to the amount of PCR product. PCR products can be detected using either fluorescent dyes that bind to double-stranded DNA or fluorescently labeled sequence-specific probes(3.SYBR Green ISYBR® Green I binds all double-stranded DNA molecules, emitting a fluorescent signal of a defined wavelength on binding. The excitation and emission maxima of SYBR Green I are at 494 nm and 521 nm, respectively, and are compatible for

  14. Video Surveillance for Real Time Objects

    Directory of Open Access Journals (Sweden)

    N.R. Raajan

    2012-12-01

    Full Text Available In this study, we describe an integrated solution for video surveillance in a fortified environment. The focus of this study is on identification of real time objects on different environments. The system is composed of robust object detection module, which normally detects the presence of abandoned objects, concealed objects hidden inside the human clothing, objects in dark environment and performs image segmentation with the intention of facilitating human operator’s task of retrieving the cause of a buzzer. The abandoned objects are detected by image segmentation based on temporal rank order filtering. Image fusion technique which fuses a color visual image and a corresponding IR image for concealed objects in guarded environment and in some cases like dark environment heat signature can be used for detecting real time objects etc. In the clips of interest, the key frame is the one depicting a person leaving a dangerous object and is determined on the basis of a feature indicating the movement around the dangerous region.

  15. Real-time PCR in microfluidic devices

    Science.gov (United States)

    Becker, Holger; Hlawatsch, Nadine; Klemm, Richard; Moche, Christian; Hansen-Hagge, Thomas; Gärtner, Claudia

    2014-03-01

    A central method in a standard biochemical laboratory is represented by the polymerase chain reaction (PCR), therefore many attempts have been performed so far to implement this technique in lab-on-a-chip (LOC) devices. PCR is an ideal candidate for miniaturization because of a reduction of assay time and decreased costs for expensive bio-chemicals. In case of the "classical" PCR, detection is done by identification of DNA fragments electrophoretically separated in agarose gels. This method is meanwhile frequently replaced by the so-called Real-Time-PCR because here the exponential increase of amplificates can be observed directly by measurement of DNA interacting fluorescent dyes. Two main methods for on-chip PCRs are available: traditional "batch" PCR in chambers on a chip using thermal cycling, requiring about 30 minutes for a typical PCR protocol and continuous-flow PCR, where the liquid is guided over stationary temperature zones. In the latter case, the PCR protocol can be as fast as 5 minutes. In the presented work, a proof of concept is demonstrated for a real-time-detection of PCR products in microfluidic systems.

  16. An efficient real time superresolution ASIC system

    Science.gov (United States)

    Reddy, Dikpal; Yue, Zhanfeng; Topiwala, Pankaj

    2008-04-01

    Superresolution of images is an important step in many applications like target recognition where the input images are often grainy and of low quality due to bandwidth constraints. In this paper, we present a real-time superresolution application implemented in ASIC/FPGA hardware, and capable of 30 fps of superresolution by 16X in total pixels. Consecutive frames from the video sequence are grouped and the registered values between them are used to fill the pixels in the higher resolution image. The registration between consecutive frames is evaluated using the algorithm proposed by Schaum et al. The pixels are filled by averaging a fixed number of frames associated with the smallest error distances. The number of frames (the number of nearest neighbors) is a user defined parameter whereas the weights in the averaging process are decided by inverting the corresponding smallest error distances. Wiener filter is used to post process the image. Different input parameters, such as size of input image, enlarging factor and the number of nearest neighbors, can be tuned conveniently by the user. We use a maximum word size of 32 bits to implement the algorithm in Matlab Simulink as well as the hardware, which gives us a fine balance between the number of bits and performance. The algorithm performs with real time speed with very impressive superresolution results.

  17. Real-time applications of neural nets

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, J.E.

    1989-05-01

    Producing, accelerating and colliding very high power, low emittance beams for long periods is a formidable problem in real-time control. As energy has grown exponentially in time so has the complexity of the machines and their control systems. Similar growth rates have occurred in many areas, e.g., improved integrated circuits have been paid for with comparable increases in complexity. However, in this case, reliability, capability and cost have improved due to reduced size, high production and increased integration which allow various kinds of feedback. In contrast, most large complex systems (LCS) are perceived to lack such possibilities because only one copy is made. Neural nets, as a metaphor for LCS, suggest ways to circumvent such limitations. It is argued that they are logically equivalent to multi-loop feedback/forward control of faulty systems. While complimentary to AI, they mesh nicely with characteristics desired for real-time systems. Such issues are considered, examples given and possibilities discussed. 21 refs., 6 figs.

  18. ROBUST MEMORY MANAGEMENT USING REAL TIME CONCEPTS

    Directory of Open Access Journals (Sweden)

    V. Karthikeyan

    2014-01-01

    Full Text Available Memory fragmentation is the development of a large number of separate free areas. Memory management in embedded systems demand effective implementation schemes to avoid fragmentation problem. Existing dynamic memory allocation methods fail to suit real time system requirements. Execution times need to be deterministic and this motivates the need for allocation and deallocation to be done in constant time with the help of API’s. In µC/OS-II, memory allocation is semi-dynamic and a buddy allocator dynamic memory allocation algorithm is commonly used. Programmer must statically allocate a memory and partition the region using µC/OS-II Kernel API. Tasks can only request pre-partitioned fixed-size memory space from µC/OS-II. Memory allocation times are influenced by the ratio of memory allocation to the stack size of the task. In this research work memory management in LPC 1768 environment using RTOS µC/OS-II is proposed. Effective sharing of memory blocks among tasks co exists with partition. The captured results shows that the memory allocation and deallocation suits real time. The implication of the work is that, the necessity to reserve a static set of locations ahead of time is eliminated so that memory can be allocated at compile or design time.

  19. Noninvasive and real-time monitoring of molecular targeting therapy for lymph node and peritoneal metastasis in nude mice bearing xenografts of human colorectal cancer cells tagged with GFP and DsRed

    Science.gov (United States)

    Nakanishi, Hayao; Hara, Masayasu; Ikehara, Yuzuru; Tatematsu, Masae

    2007-02-01

    We have developed an in vivo imaging system consisting of GFP- and DsRed-tagged human colonic cancer cell line, which has peritoneal and lymph node metastatic potential and show high sensitivity to EGFR targeting drugs, and convenient detection devices for GFP and DsRed. The latter includes a small handy fluorescence detection device for external monitoring of the therapeutic effect of the drug and a convenient stereo fluorescent microscope for internal visualization of micrometastases. We applied this imaging system to investigate anti-metastatic effects of EGFR targeting drugs such as gefitinib (Iressa). This system allowed sensitive detection of the development of peritoneal and lymph node metastases from the micrometastasis stage at the cellular level and also permited noninvasive, non-anesthetic monitoring of anti-metastatic effect of the drug in an animal facility without any pretreatment. Significant decreases in the intraabdominal metastatic tumor growth and prevention of inguinal lymph node metastasis by gefitinib treatment could be clearly monitored. These results suggest that convenient, low-cost, true real-time monitoring of therapeutic effect using such a fluorescence-mediated whole body imaging system seems to enhance the speed of preclinical study for novel anti-cancer agents and will allow us to understand the action mechanism of molecular targeting drugs.

  20. Real Time Data in Synoptic Meteolorolgy and Weather Forecasting Education

    Science.gov (United States)

    Campetella, C. M.; Gassmann, M. I.

    2006-05-01

    The Department of Atmospheric and Oceanographic Sciences (DAOS) of the University of Buenos Aires is the university component of the World Meteorological Organization (WMO) Regional Meteorological Training Center (RMTC) in Region III. In January, 2002 our RMTC was invited to take part in the MeteoForum pilot project that was developed jointly by the COMET and Unidata programs of the University Corporation for Atmospheric Research (UCAR). MeteoForum comprises an international network of WMO Region III and IV RMTCs working collaboratively with universities to enhance their roles of training and education through information technologies and multilingual collections of resources. The DAOS undertook to improve its infrastructure to be able to access hydro-meteorological information in real-time as part of the Unidata community. In 2003, the DAOS received some Unidata equipment grant funds to update its computer infrastructure, improving communications with an operationally quicker system. Departmental networking was upgraded to 100 Mb/s capability while, at the same time, new computation resources were purchased that increased the number of computers available for student use from 5 to 8. This upgrade has also resulted in more and better computers being available for student and faculty research. A video projection system, purchased with funds provided by the COMET program as part of Meteoforum, is used in classrooms with Internet connections for a variety of educational activities. The upgraded computing and networking facilities have contributed to the development of educational modules using real-time hydro-meteorological and other digital data for the classroom. With the aid of Unidata personal, the Unidata Local Data Management (LDM) software was installed and configured to request and process real-time feeds of global observational data; global numerical model output from the US National Centers for Environmental Prediction (NCEP) models; and all imager channels

  1. Treating Internet Addiction with Cognitive-Behavioral Therapy: A Thematic Analysis of the Experiences of Therapists

    Science.gov (United States)

    van Rooij, Antonius J.; Zinn, Mieke F.; Schoenmakers, Tim M.; van de Mheen, Dike

    2012-01-01

    In 2009, one of the major Dutch addiction care organizations initiated a pilot program to explore the possibility of using an existing Cognitive Behavioral Therapy and Motivational Interviewing based treatment program ("Lifestyle Training") to treat internet addiction. The current study evaluates this pilot treatment program by providing…

  2. Treating Internet Addiction with Cognitive-Behavioral Therapy: A Thematic Analysis of the Experiences of Therapists

    Science.gov (United States)

    van Rooij, Antonius J.; Zinn, Mieke F.; Schoenmakers, Tim M.; van de Mheen, Dike

    2012-01-01

    In 2009, one of the major Dutch addiction care organizations initiated a pilot program to explore the possibility of using an existing Cognitive Behavioral Therapy and Motivational Interviewing based treatment program ("Lifestyle Training") to treat internet addiction. The current study evaluates this pilot treatment program by providing…

  3. Treating internet addiction with cognitive-behavioral therapy: a thematic analysis of the experiences of therapists.

    NARCIS (Netherlands)

    Rooij, A.J. van; Zinn, M.F.; Schoenmakers, T.M.; Mheen, D. van de

    2012-01-01

    In 2009, one of the major Dutch addiction care organizations initiated a pilot program to explore the possibility of using an existing Cognitive Behavioral Therapy and Motivational Interviewing based treatment program (‘Lifestyle Training’) to treat internet addiction. The current study evaluates

  4. Treating internet addiction with cognitive-behavioral therapy: a thematic analysis of the experiences of therapists.

    NARCIS (Netherlands)

    Rooij, A.J. van; Zinn, M.F.; Schoenmakers, T.M.; Mheen, D. van de

    2012-01-01

    In 2009, one of the major Dutch addiction care organizations initiated a pilot program to explore the possibility of using an existing Cognitive Behavioral Therapy and Motivational Interviewing based treatment program (‘Lifestyle Training’) to treat internet addiction. The current study evaluates th

  5. Treating Internet Addiction with Cognitive-Behavioral Therapy: A Thematic Analysis of the Experiences of Therapists

    Science.gov (United States)

    van Rooij, Antonius J.; Zinn, Mieke F.; Schoenmakers, Tim M.; van de Mheen, Dike

    2012-01-01

    In 2009, one of the major Dutch addiction care organizations initiated a pilot program to explore the possibility of using an existing Cognitive Behavioral Therapy and Motivational Interviewing based treatment program ("Lifestyle Training") to treat internet addiction. The current study evaluates this pilot treatment program by providing a…

  6. Real-Time and Near Real-Time Data for Space Weather Applications and Services

    Science.gov (United States)

    Singer, H. J.; Balch, C. C.; Biesecker, D. A.; Matsuo, T.; Onsager, T. G.

    2015-12-01

    Space weather can be defined as conditions in the vicinity of Earth and in the interplanetary environment that are caused primarily by solar processes and influenced by conditions on Earth and its atmosphere. Examples of space weather are the conditions that result from geomagnetic storms, solar particle events, and bursts of intense solar flare radiation. These conditions can have impacts on modern-day technologies such as GPS or electric power grids and on human activities such as astronauts living on the International Space Station or explorers traveling to the moon or Mars. While the ultimate space weather goal is accurate prediction of future space weather conditions, for many applications and services, we rely on real-time and near-real time observations and model results for the specification of current conditions. In this presentation, we will describe the space weather system and the need for real-time and near-real time data that drive the system, characterize conditions in the space environment, and are used by models for assimilation and validation. Currently available data will be assessed and a vision for future needs will be given. The challenges for establishing real-time data requirements, as well as acquiring, processing, and disseminating the data will be described, including national and international collaborations. In addition to describing how the data are used for official government products, we will also give examples of how these data are used by both the public and private sector for new applications that serve the public.

  7. Memory controllers for real-time embedded systems predictable and composable real-time systems

    CERN Document Server

    Akesson, Benny

    2012-01-01

      Verification of real-time requirements in systems-on-chip becomes more complex as more applications are integrated. Predictable and composable systems can manage the increasing complexity using formal verification and simulation.  This book explains the concepts of predictability and composability and shows how to apply them to the design and analysis of a memory controller, which is a key component in any real-time system. This book is generally intended for readers interested in Systems-on-Chips with real-time applications.   It is especially well-suited for readers looking to use SDRAM memories in systems with hard or firm real-time requirements. There is a strong focus on real-time concepts, such as predictability and composability, as well as a brief discussion about memory controller architectures for high-performance computing. Readers will learn step-by-step how to go from an unpredictable SDRAM memory, offering highly variable bandwidth and latency, to a predictable and composable shared memory...

  8. Windrum: a program for monitoring seismic signals in real time

    Science.gov (United States)

    Giudicepietro, Flora

    2017-04-01

    Windrum is a program devote to monitor seismic signals arriving from remote stations in real time. Since 2000, the Osservatorio Vesuviano (INGV) uses the first version of Windrum to monitor the seismic activity of Mt. Vesuvius, Campi Flegrei, Ischia and Stromboli volcano. The program has been also used at the Observatory of Bukittinggi (Indonesia), at the offices of the Italian National Civil Protection, at the COA in Stromboli and at the Civil Protection Center of the municipality of Pozzuoli (Napoli, Italy). In addition, the Osservatorio Vesuviano regularly uses Windrum in educational events such as the Festival of Science in Genova (Italy), FuturoRemoto and other events organized by Città della Scienza in Naples (Italy). The program displays the seismic trace of one station on a monitor, using short packet of data (typically 1 or 2 seconds) received through UTC Internet protocol. The data packets are in Trace_buffer format, a native protocol of Earthworm seismic system that is widely used for the data transmission on Internet. Windrum allows the user to visualize 24 hours of signals, to zoom selected windows of data, in order to estimate the duration Magnitude (Md) of an earthquake, in an intercative way, and to generate graphic images for the web. Moreover, Windrum can exchange Internet messages with other copies of the same program to synchronize actions, such as to zoom the same window of data or mark the beginning of an earthquake on all active monitors simultaneously. Originally, in 2000, Windrum was developed in VB6. I have now developed a new version in VB.net, which goes beyond the obsolescence problems that were appearing. The new version supports the decoding of binary packets received by soket in a more flexible way, allowing the generation of graphic images in different formats. In addition, the new version allows a more flexible layout configuration, suitable for use on large screens with high resolution. Over the past 17 years the use of Windrum

  9. Feedback as real-time constructions

    DEFF Research Database (Denmark)

    Keiding, Tina Bering; Qvortrup, Ane

    2014-01-01

    This article offers a re-description of feedback and the significance of time in feedback constructions based on systems theory. It describes feedback as internal, real-time constructions in a learning system. From this perspective, feedback is neither immediate nor delayed, but occurs in the very...... instant it takes place. This article argues for a clear distinction between the timing of communicative events, such as responses that are provided as help for feedback constructions, and the feedback construction itself as an event in a psychic system. Although feedback is described as an internal......, system-relative construction, different teaching environments offer diverse conditions for feedback constructions. The final section of this article explores this idea with the help of examples from both synchronous oral interaction and asynchronous text-based interaction mediated by digital media....

  10. Real Time Structured Light and Applications

    DEFF Research Database (Denmark)

    Wilm, Jakob

    Structured light scanning is a versatile method for 3D shape acquisition. While much faster than most competing measurement techniques, most high-end structured light scans still take in the order of seconds to complete. Low-cost sensors such as Microsoft Kinect and time of flight cameras have made...... 3D sensor ubiquitous and have resulted in a vast amount of new applications and methods. However, such low-cost sensors are generally limited in their accuracy and precision, making them unsuitable for e.g. accurate tracking and pose estimation. With recent improvements in projector technology......]. A high performance flexible open source software toolkit is presented [Contribution C], which makes real time scanning possible on commodity hardware. Further, an approach is presented to correct for motion artifacts in dynamic scenes [Contribution E]. An application for such systems is presented...

  11. Near real-time stereo vision system

    Science.gov (United States)

    Anderson, Charles H. (Inventor); Matthies, Larry H. (Inventor)

    1993-01-01

    The apparatus for a near real-time stereo vision system for use with a robotic vehicle is described. The system is comprised of two cameras mounted on three-axis rotation platforms, image-processing boards, a CPU, and specialized stereo vision algorithms. Bandpass-filtered image pyramids are computed, stereo matching is performed by least-squares correlation, and confidence ranges are estimated by means of Bayes' theorem. In particular, Laplacian image pyramids are built and disparity maps are produced from the 60 x 64 level of the pyramids at rates of up to 2 seconds per image pair. The first autonomous cross-country robotic traverses (of up to 100 meters) have been achieved using the stereo vision system of the present invention with all computing done onboard the vehicle. The overall approach disclosed herein provides a unifying paradigm for practical domain-independent stereo ranging.

  12. Kalman Filtering with Real-Time Applications

    CERN Document Server

    Chui, Charles K

    2009-01-01

    Kalman Filtering with Real-Time Applications presents a thorough discussion of the mathematical theory and computational schemes of Kalman filtering. The filtering algorithms are derived via different approaches, including a direct method consisting of a series of elementary steps, and an indirect method based on innovation projection. Other topics include Kalman filtering for systems with correlated noise or colored noise, limiting Kalman filtering for time-invariant systems, extended Kalman filtering for nonlinear systems, interval Kalman filtering for uncertain systems, and wavelet Kalman filtering for multiresolution analysis of random signals. Most filtering algorithms are illustrated by using simplified radar tracking examples. The style of the book is informal, and the mathematics is elementary but rigorous. The text is self-contained, suitable for self-study, and accessible to all readers with a minimum knowledge of linear algebra, probability theory, and system engineering.

  13. Real time speech formant analyzer and display

    Energy Technology Data Exchange (ETDEWEB)

    Holland, George E. (Ames, IA); Struve, Walter S. (Ames, IA); Homer, John F. (Ames, IA)

    1987-01-01

    A speech analyzer for interpretation of sound includes a sound input which converts the sound into a signal representing the sound. The signal is passed through a plurality of frequency pass filters to derive a plurality of frequency formants. These formants are converted to voltage signals by frequency-to-voltage converters and then are prepared for visual display in continuous real time. Parameters from the inputted sound are also derived and displayed. The display may then be interpreted by the user. The preferred embodiment includes a microprocessor which is interfaced with a television set for displaying of the sound formants. The microprocessor software enables the sound analyzer to present a variety of display modes for interpretive and therapeutic used by the user.

  14. Embedded and real-time operating systems

    CERN Document Server

    Wang, K C

    2017-01-01

    This book covers the basic concepts and principles of operating systems, showing how to apply them to the design and implementation of complete operating systems for embedded and real-time systems. It includes all the foundational and background information on ARM architecture, ARM instructions and programming, toolchain for developing programs, virtual machines for software implementation and testing, program execution image, function call conventions, run-time stack usage and link C programs with assembly code. It describes the design and implementation of a complete OS for embedded systems in incremental steps, explaining the design principles and implementation techniques. For Symmetric Multiprocessing (SMP) embedded systems, the author examines the ARM MPcore processors, which include the SCU and GIC for interrupts routing and interprocessor communication and synchronization by Software Generated Interrupts (SGIs). Throughout the book, complete working sample systems demonstrate the design principles and...

  15. Operational and real-time Business Intelligence

    Directory of Open Access Journals (Sweden)

    Daniela Ioana SANDU

    2008-01-01

    Full Text Available A key component of a company’s IT framework is a business intelligence (BI system. BI enables business users to report on, analyze and optimize business operations to reduce costs and increase revenues. Organizations use BI for strategic and tactical decision making where the decision-making cycle may span a time period of several weeks (e.g., campaign management or months (e.g., improving customer satisfaction.Competitive pressures coming from a very dynamic business environment are forcing companies to react faster to changing business conditions and customer requirements. As a result, there is now a need to use BI to help drive and optimize business operations on a daily basis, and, in some cases, even for intraday decision making. This type of BI is usually called operational business intelligence and real-time business intelligence.

  16. Real-Time Optical Antimicrobial Susceptibility Testing

    DEFF Research Database (Denmark)

    Fredborg, Marlene; Andersen, Klaus R; Jørgensen, Erik

    2013-01-01

    Rapid antibiotic susceptibility testing is in highly demand in health-care fields as antimicrobial resistant bacterial strains emerge and spread. Here we describe an optical screening system (oCelloScope), which based on time-lapse imaging of 96 bacteria-antibiotic combinations at a time, introdu......Rapid antibiotic susceptibility testing is in highly demand in health-care fields as antimicrobial resistant bacterial strains emerge and spread. Here we describe an optical screening system (oCelloScope), which based on time-lapse imaging of 96 bacteria-antibiotic combinations at a time......, introduces real-time detection of bacterial growth and antimicrobial susceptibility, with imaging material to support the automatically generated graphs. Automated antibiotic susceptibility tests of a monoculture showed statistically significant antibiotic effect within 6 minutes and within 30 minutes...

  17. Real-time forecasts of dengue epidemics

    Science.gov (United States)

    Yamana, T. K.; Shaman, J. L.

    2015-12-01

    Dengue is a mosquito-borne viral disease prevalent in the tropics and subtropics, with an estimated 2.5 billion people at risk of transmission. In many areas with endemic dengue, disease transmission is seasonal but prone to high inter-annual variability with occasional severe epidemics. Predicting and preparing for periods of higher than average transmission is a significant public health challenge. Here we present a model of dengue transmission and a framework for optimizing model simulations with real-time observational data of dengue cases and environmental variables in order to generate ensemble-based forecasts of the timing and severity of disease outbreaks. The model-inference system is validated using synthetic data and dengue outbreak records. Retrospective forecasts are generated for a number of locations and the accuracy of these forecasts is quantified.

  18. Terrestrial Real-Time Volcano Monitoring

    Science.gov (United States)

    Franke, M.

    2013-12-01

    As volcano monitoring involves more and different sensors from seismic to GPS receivers, from video and thermal cameras to multi-parameter probes measuring temperature, ph values and humidity in the ground and the air, it becomes important to design real-time networks that integrate and leverage the multitude of available parameters. In order to do so some simple principles need to be observed: a) a common time base for all measurements, b) a packetized general data communication protocol for acquisition and distribution, c) an open and well documented interface to the data permitting standard and emerging innovative processing, and d) an intuitive visualization platform for scientists and civil defense personnel. Although mentioned as simple principles, the list above does not necessarily lead to obvious solutions or integrated systems, which is, however, required to take advantage of the available data. Only once the different data streams are put into context to each other in terms of time and location can a broader view be obtained and additional information extracted. The presentation is a summary of currently available technologies and how they can achieve the goal of an integrated real-time volcano monitoring system. A common time base are standard for seismic and GPS networks. In different projects we extended this to video feeds and time-lapse photography. Other probes have been integrated with vault interface enclosures (VIE) as used in the Transportable Array (TA) of the USArray. The VIE can accommodate the sensors employed in volcano monitoring. The TA has shown that Antelope is a versatile and robust middleware. It provides the required packetized general communication protocol that is independent from the actual physical communication link leaving the network design to adopt appropriate and possible hybrid solutions. This applies for the data acquisition and the data/information dissemination providing both a much needed collaboration platform, as

  19. CONSIDERATIONS ON REAL TIME DATA WAREHOUSING (RTDW

    Directory of Open Access Journals (Sweden)

    Marius Bogdan DINU

    2014-05-01

    Full Text Available The RTDW concept originated in the early 2000s. By that time, computing power had increased to a level that was allowing extraction of data collections for reporting purposes. Such collections were used almost in real time and at speeds nearly comparable to what an operation system was capable to deliver. The main idea will be to eliminate some of the components of the classic extraction process which is basically the most costly factor less time - consuming. We anticipate that the following factors will be decisive: elimination of batch-type processes [1], data compression techniques, data capture techniques, ability to keep in cache a large volume of data, parallel processing, and data mining algorithms that can adapt to such applications.

  20. A Flexible Real-Time Architecture

    Energy Technology Data Exchange (ETDEWEB)

    WICKSTROM,GREGORY L.

    2000-08-17

    Assuring hard real-time characteristics of I/O associated with embedded software is often a difficult task. Input-Output related statements are often intermixed with the computational code, resulting in I/O timing that is dependent on the execution path and computational load. One way to mitigate this problem is through the use of interrupts. However, the non-determinism that is introduced by interrupt driven I/O may be so difficult to analyze that it is prohibited in some high consequence systems. This paper describes a balanced hardware/software solution to obtain consistent interrupt-free I/O timing, and results in software that is much more amenable to analysis.

  1. Real-time color holographic interferometry

    Science.gov (United States)

    Desse, Jean-Michel; Albe, Felix; Tribillon, Jean-Louis

    2002-09-01

    A new optical technique based on real-time color holographic interferometry has been developed for analyzing unsteady aerodynamic wakes in fluid mechanics or for measuring displacements and deformations in solid mechanics. The technique's feasibility is demonstrated here. It uses three coherent wavelengths produced simultaneously by a cw laser (mixed argon and krypton). Holograms are recorded on single-layer panchromatic silver halide (Slavich PFG 03C) plates. Results show the optical setup can be adjusted to obtain a uniform background color. The interference fringe pattern visualized is large and colored and exhibits a single central white fringe, which makes the zero order of the interferogram easy to identify. An application in a subsonic wind tunnel is presented, in which the unsteady wake past a cylinder is recorded at high rate.

  2. Wi-Fi real time location systems

    Science.gov (United States)

    Doll, Benjamin A.

    This thesis objective was to determine the viability of utilizing an untrained Wi-Fi. real time location system as a GPS alternative for indoor environments. Background. research showed that GPS is rarely able to penetrate buildings to provide reliable. location data. The benefit of having location information in a facility and how they might. be used for disaster or emergency relief personnel and their resources motivated this. research. A building was selected with a well-deployed Wi-Fi infrastructure and its. untrained location feature was used to determine the distance between the specified. test points and the system identified location. It was found that the average distance. from the test point throughout the facility was 14.3 feet 80% of the time. This fell within. the defined viable range and supported that an untrained Wi-Fi RTLS system could be a. viable solution for GPS's lack of availability indoors.

  3. Real-Time Imaging of Quantum Entanglement

    CERN Document Server

    Fickler, Robert; Lapkiewicz, Radek; Ramelow, Sven; Zeilinger, Anton

    2013-01-01

    Quantum Entanglement - correlations between at least two systems that are stronger than classically explainable - is widely regarded as one of the most prominent features of quantum mechanics and quantum information science. Although, the creation of entanglement between two systems has become possible in laboratories, it has been out of the grasp of one of the most natural ways to investigate nature: direct visual observation. Here we show that modern imaging technology, namely a triggered intensified charge coupled device (ICCD) camera, is fast and sensitive enough to image in real-time the influence of the measurement of one photon on its entangled partner. To demonstrate the non-classicality of the measurements quantitatively from the registered intensity we develop a novel method to statistically analyze the image and precisely quantify the number of photons within a certain region. In addition, we show the high flexibility of our experimental setup in creating any desired spatial-mode entanglement, even...

  4. Real-time visualization of joint cavitation.

    Directory of Open Access Journals (Sweden)

    Gregory N Kawchuk

    Full Text Available Cracking sounds emitted from human synovial joints have been attributed historically to the sudden collapse of a cavitation bubble formed as articular surfaces are separated. Unfortunately, bubble collapse as the source of joint cracking is inconsistent with many physical phenomena that define the joint cracking phenomenon. Here we present direct evidence from real-time magnetic resonance imaging that the mechanism of joint cracking is related to cavity formation rather than bubble collapse. In this study, ten metacarpophalangeal joints were studied by inserting the finger of interest into a flexible tube tightened around a length of cable used to provide long-axis traction. Before and after traction, static 3D T1-weighted magnetic resonance images were acquired. During traction, rapid cine magnetic resonance images were obtained from the joint midline at a rate of 3.2 frames per second until the cracking event occurred. As traction forces increased, real-time cine magnetic resonance imaging demonstrated rapid cavity inception at the time of joint separation and sound production after which the resulting cavity remained visible. Our results offer direct experimental evidence that joint cracking is associated with cavity inception rather than collapse of a pre-existing bubble. These observations are consistent with tribonucleation, a known process where opposing surfaces resist separation until a critical point where they then separate rapidly creating sustained gas cavities. Observed previously in vitro, this is the first in-vivo macroscopic demonstration of tribonucleation and as such, provides a new theoretical framework to investigate health outcomes associated with joint cracking.

  5. Real Time Eye Template Detection and Tracking

    Directory of Open Access Journals (Sweden)

    Richa Mehta

    2012-06-01

    Full Text Available There has been a growing interest in the field of facial expression recognition especially in the last two decades. An example of such a system is the improvement of driver carefulness and accident reduction. The driver’s face is tracked while he is driving and he is warned if there seems to be an alerting fact that can result in an accident such as sleepy eyes, or looking out of the road. Furthermore, with a facial feature tracker, it becomes possible to play a synthesized avatar so that it imitates the expressions of the performer. Human-Computer Interaction (HCI systems may also be enriched by a facial feature tracker. For a user who is incapable of using her hands, a facial expression controller may be a solution to send limited commands to a computer. Eye blinking is one of the prominent areas to solve many real world problems. The process of blink detection consists of two phases. These are eye tracking followed by detection of blink. The work that has been carried out for eye tracking only is not suitable for eye blink detection. Therefore some approaches had been proposed for eye tracking along with eyes blink detection. In this thesis, real time implementation is done to count number of eye blinks in an image sequence. At last after analyzing all these approaches some of the parameters we obtained on which better performance of eye blink detection algorithm depend. This project focuses on automatic eye blink detection in real time. The aim of this thesis is to count the number of eye blinks in a video. This project will be performed on a video database of the facial expressions.

  6. Internet-Delivered Cognitive Behavior Therapy for Adolescents With Irritable Bowel Syndrome: A Randomized Controlled Trial.

    Science.gov (United States)

    Bonnert, Marianne; Olén, Ola; Lalouni, Maria; Benninga, Marc A; Bottai, Matteo; Engelbrektsson, Johanna; Hedman, Erik; Lenhard, Fabian; Melin, Bo; Simrén, Magnus; Vigerland, Sarah; Serlachius, Eva; Ljótsson, Brjánn

    2017-01-01

    Few treatments have been able to effectively manage pediatric irritable bowel syndrome (IBS). Internet-delivered cognitive behavior therapy (Internet-CBT) based on exposure for abdominal symptoms is effective for adult IBS. The objective of this study was to evaluate the efficacy of Internet-CBT based on behavioral exposure for adolescents with IBS. Adolescents with IBS fulfilling the Rome III criteria were randomized to either Internet-CBT or a wait-list control. The Internet-CBT was a 10-week intervention where the main component was exposure to IBS symptoms by reduction of avoidance of abdominal symptoms and instead stepwise provocation of symptoms. The primary outcome was total score on Gastrointestinal Symptoms Rating Scale for IBS (GSRS-IBS). Secondary outcomes included adolescent- and parent-rated quality of life and parent-rated gastrointestinal symptoms. Difference between groups was assessed from pretreatment to posttreatment and the Internet-CBT group was also evaluated at 6 months after treatment completion. A total of 101 adolescents with IBS (13-17 years of age) were included in this study. Dropout rates were low (6%) and all randomized patients were included in intent-to-treat analyses based on mixed effects models. Analyses showed a significant larger pretreatment to posttreatment change on the primary outcome GSRS-IBS (B=-6.42, P=0.006, effect size Cohen's d=0.45, 95% confidence interval (0.12, 0.77)) and on almost all secondary outcomes for the Internet-CBT group compared with the control group. After 6 months, the results were stable or significantly improved. Internet-CBT based on exposure exercises for adolescents with IBS can effectively improve gastrointestinal symptoms and quality of life.

  7. A P2P Architecture to Support Mobile Real-Time Multimedia Communications

    Directory of Open Access Journals (Sweden)

    Daniel G. Costa

    2010-10-01

    Full Text Available A new SIP standard based on peer to peer paradigm allows the keeping of user localization information in a decentralized way, adding flexibility to real-time mobile communications. Despite specification of terminal mobility in P2PSIP, handover procedures in transport-layer have better performance when compared with solutions in application-layer of Internet. SCTP transport protocol supports handover and a partial reliable communication service. Putting together P2PSIP and SCTP extensions, an end-to-end architecture can be proposed, aimed at the support of real-time multimedia applications with mobility requirements.

  8. A Single Core Hardware Approach of MPEG Audio Decoder for Real-Time Transmission

    Directory of Open Access Journals (Sweden)

    M.B.I. Reaz

    2012-04-01

    Full Text Available The decoding of the voice audio bit stream is an issue in terms of real-time transmission of high quality voice audio over the Internet. A stand-alone chip to perform decoding is a better solution over software approach. The MPEG audio compression provides high compression with minimal loss. This study describes a VHDL model of MPEG audio layer 1 decoder that perform concurrent processing while receiving voice quality audio input bit stream at a constant bit rate and simultaneously producing a stream of 8-bit monopole PCM samples at a constant sampling frequency in real time.

  9. Versatile synchronized real-time MEG hardware controller for large-scale fast data acquisition

    Science.gov (United States)

    Sun, Limin; Han, Menglai; Pratt, Kevin; Paulson, Douglas; Dinh, Christoph; Esch, Lorenz; Okada, Yoshio; Hämäläinen, Matti

    2017-05-01

    Versatile controllers for accurate, fast, and real-time synchronized acquisition of large-scale data are useful in many areas of science, engineering, and technology. Here, we describe the development of a controller software based on a technique called queued state machine for controlling the data acquisition (DAQ) hardware, continuously acquiring a large amount of data synchronized across a large number of channels (>400) at a fast rate (up to 20 kHz/channel) in real time, and interfacing with applications for real-time data analysis and display of electrophysiological data. This DAQ controller was developed specifically for a 384-channel pediatric whole-head magnetoencephalography (MEG) system, but its architecture is useful for wide applications. This controller running in a LabVIEW environment interfaces with microprocessors in the MEG sensor electronics to control their real-time operation. It also interfaces with a real-time MEG analysis software via transmission control protocol/internet protocol, to control the synchronous acquisition and transfer of the data in real time from >400 channels to acquisition and analysis workstations. The successful implementation of this controller for an MEG system with a large number of channels demonstrates the feasibility of employing the present architecture in several other applications.

  10. An Efficient Secure Real-Time Concurrency Control Protocol

    Institute of Scientific and Technical Information of China (English)

    XIAO Yingyuan; LIU Yunsheng; CHEN Xiangyang

    2006-01-01

    Secure real-time databases must simultaneously satisfy two requirements in guaranteeing data security and minimizing the missing deadlines ratio of transactions. However, these two requirements can conflict with each other and achieve one requirement is to sacrifice the other. This paper presents a secure real-time concurrency control protocol based on optimistic method. The concurrency control protocol incorporates security constraints in a real-time optimistic concurrency control protocol and makes a suitable tradeoff between security and real-time requirements by introducing secure influence factor and real-time influence factor. The experimental results show the concurrency control protocol achieves data security without degrading real-time performance significantly.

  11. Toward real-time remote processing of laparoscopic video.

    Science.gov (United States)

    Ronaghi, Zahra; Duffy, Edward B; Kwartowitz, David M

    2015-10-01

    Laparoscopic surgery is a minimally invasive surgical technique where surgeons insert a small video camera into the patient's body to visualize internal organs and use small tools to perform surgical procedures. However, the benefit of small incisions has a drawback of limited visualization of subsurface tissues, which can lead to navigational challenges in the delivering of therapy. Image-guided surgery uses the images to map subsurface structures and can reduce the limitations of laparoscopic surgery. One particular laparoscopic camera system of interest is the vision system of the daVinci-Si robotic surgical system (Intuitive Surgical, Sunnyvale, California). The video streams generate approximately 360 MB of data per second, demonstrating a trend toward increased data sizes in medicine, primarily due to higher-resolution video cameras and imaging equipment. Processing this data on a bedside PC has become challenging and a high-performance computing (HPC) environment may not always be available at the point of care. To process this data on remote HPC clusters at the typical 30 frames per second (fps) rate, it is required that each 11.9 MB video frame be processed by a server and returned within 1/30th of a second. The ability to acquire, process, and visualize data in real time is essential for the performance of complex tasks as well as minimizing risk to the patient. As a result, utilizing high-speed networks to access computing clusters will lead to real-time medical image processing and improve surgical experiences by providing real-time augmented laparoscopic data. We have performed image processing algorithms on a high-definition head phantom video (1920 × 1080 pixels) and transferred the video using a message passing interface. The total transfer time is around 53 ms or 19 fps. We will optimize and parallelize these algorithms to reduce the total time to 30 ms.

  12. Towards real-time remote processing of laparoscopic video

    Science.gov (United States)

    Ronaghi, Zahra; Duffy, Edward B.; Kwartowitz, David M.

    2015-03-01

    Laparoscopic surgery is a minimally invasive surgical technique where surgeons insert a small video camera into the patient's body to visualize internal organs and small tools to perform surgical procedures. However, the benefit of small incisions has a drawback of limited visualization of subsurface tissues, which can lead to navigational challenges in the delivering of therapy. Image-guided surgery (IGS) uses images to map subsurface structures and can reduce the limitations of laparoscopic surgery. One particular laparoscopic camera system of interest is the vision system of the daVinci-Si robotic surgical system (Intuitive Surgical, Sunnyvale, CA, USA). The video streams generate approximately 360 megabytes of data per second, demonstrating a trend towards increased data sizes in medicine, primarily due to higher-resolution video cameras and imaging equipment. Processing this data on a bedside PC has become challenging and a high-performance computing (HPC) environment may not always be available at the point of care. To process this data on remote HPC clusters at the typical 30 frames per second (fps) rate, it is required that each 11.9 MB video frame be processed by a server and returned within 1/30th of a second. The ability to acquire, process and visualize data in real-time is essential for performance of complex tasks as well as minimizing risk to the patient. As a result, utilizing high-speed networks to access computing clusters will lead to real-time medical image processing and improve surgical experiences by providing real-time augmented laparoscopic data. We aim to develop a medical video processing system using an OpenFlow software defined network that is capable of connecting to multiple remote medical facilities and HPC servers.

  13. Real-Time Fish Observation and Fish Category Database Construction

    Directory of Open Access Journals (Sweden)

    Fang-Pang Lin

    2012-04-01

    Full Text Available This paper proposes a distributed real-time video stream system for underwater fish observation in the real world. The system, based on a three-tier architecture, includes capture devices unit, stream processor unit, and display devices unit. It supports variety of capture source devices, such as HDV, DV, WebCam, TV Card, Capture Card, and video compression formats, such as WMV, FLV/SWF, MJPEG, MPEG-2/4. The system has been demonstrated in Taiwan for long-term underwater fish observation. CCTV cameras and high-definition cameras are deployed on our system. Video compression methods and image processing methods are implemented to reduce network transfer flow and data storage space. Marine ecologists and end users can browse these real-time video streams via the Internet to understand the ecological changes immediately. These video data is preserved to form a resource base for marine ecologists. Based on the video data, fish detection is implemented. However, it is complicated in the unconstrained underwater environment, due to the water flow causes the water plants sway severely. In this paper, a bounding-surrounding boxes method is proposed to overcome the problem. It efficiently classifies moving fish as the foreground objects and the swaying water plants as the background objects. It enables to remove the irrelevant information (without fish to reduce the massive amount of video data. Moreover, fish tracking is implemented to acquire multiple species of fish images with varied angles, sizes, shapes, and illumination to construct a fish category database.

  14. Real Time Seismic Prediction while Drilling

    Science.gov (United States)

    Schilling, F. R.; Bohlen, T.; Edelmann, T.; Kassel, A.; Heim, A.; Gehring, M.; Lüth, S.; Giese, R.; Jaksch, K.; Rechlin, A.; Kopf, M.; Stahlmann, J.; Gattermann, J.; Bruns, B.

    2009-12-01

    Efficient and safe drilling is a prerequisite to enhance the mobility of people and goods, to improve the traffic as well as utility infrastructure of growing megacities, and to ensure the growing energy demand while building geothermal and in hydroelectric power plants. Construction within the underground is often building within the unknown. An enhanced risk potential for people and the underground building may arise if drilling enters fracture zones, karsts, brittle rocks, mixed solid and soft rocks, caves, or anthropogenic obstacles. Knowing about the material behavior ahead of the drilling allows reducing the risk during drilling and construction operation. In drilling operations direct observations from boreholes can be complemented with geophysical investigations. In this presentation we focus on “real time” seismic prediction while drilling which is seen as a prerequisite while using geophysical methods in modern drilling operations. In solid rocks P- and S-wave velocity, refraction and reflection as well as seismic wave attenuation can be used for the interpretation of structures ahead of the drilling. An Integrated Seismic Imaging System (ISIS) for exploration ahead of a construction is used, where a pneumatic hammer or a magnetostrictive vibration source generate repetitive signals behind the tunneling machine. Tube waves are generated which travel along the tunnel to the working face. There the tube waves are converted to mainly S- but also P-Waves which interact with the formation ahead of the heading face. The reflected or refracted waves travel back to the working front are converted back to tube waves and recorded using three-component geophones which are fit into the tips of anchor rods. In near real time, the ISIS software allows for an integrated 3D imaging and interpretation of the observed data, geological and geotechnical parameters. Fracture zones, heterogeneities, and variations in the rock properties can be revealed during the drilling

  15. The INGV Real Time Strong Motion Database

    Science.gov (United States)

    Massa, Marco; D'Alema, Ezio; Mascandola, Claudia; Lovati, Sara; Scafidi, Davide; Gomez, Antonio; Carannante, Simona; Franceschina, Gianlorenzo; Mirenna, Santi; Augliera, Paolo

    2017-04-01

    The INGV real time strong motion data sharing is assured by the INGV Strong Motion Database. ISMD (http://ismd.mi.ingv.it) was designed in the last months of 2011 in cooperation among different INGV departments, with the aim to organize the distribution of the INGV strong-motion data using standard procedures for data acquisition and processing. The first version of the web portal was published soon after the occurrence of the 2012 Emilia (Northern Italy), Mw 6.1, seismic sequence. At that time ISMD was the first European real time web portal devoted to the engineering seismology community. After four years of successfully operation, the thousands of accelerometric waveforms collected in the archive need necessary a technological improvement of the system in order to better organize the new data archiving and to make more efficient the answer to the user requests. ISMD 2.0 was based on PostgreSQL (www.postgresql.org), an open source object- relational database. The main purpose of the web portal is to distribute few minutes after the origin time the accelerometric waveforms and related metadata of the Italian earthquakes with ML≥3.0. Data are provided both in raw SAC (counts) and automatically corrected ASCII (gal) formats. The web portal also provide, for each event, a detailed description of the ground motion parameters (i.e. Peak Ground Acceleration, Velocity and Displacement, Arias and Housner Intensities) data converted in velocity and displacement, response spectra up to 10.0 s and general maps concerning the recent and the historical seismicity of the area together with information about its seismic hazard. The focal parameters of the events are provided by the INGV National Earthquake Center (CNT, http://cnt.rm.ingv.it). Moreover, the database provides a detailed site characterization section for each strong motion station, based on geological, geomorphological and geophysical information. At present (i.e. January 2017), ISMD includes 987 (121

  16. CRANS - CONFIGURABLE REAL-TIME ANALYSIS SYSTEM

    Science.gov (United States)

    Mccluney, K.

    1994-01-01

    In a real-time environment, the results of changes or failures in a complex, interconnected system need evaluation quickly. Tabulations showing the effects of changes and/or failures of a given item in the system are generally only useful for a single input, and only with regard to that item. Subsequent changes become harder to evaluate as combinations of failures produce a cascade effect. When confronted by multiple indicated failures in the system, it becomes necessary to determine a single cause. In this case, failure tables are not very helpful. CRANS, the Configurable Real-time ANalysis System, can interpret a logic tree, constructed by the user, describing a complex system and determine the effects of changes and failures in it. Items in the tree are related to each other by Boolean operators. The user is then able to change the state of these items (ON/OFF FAILED/UNFAILED). The program then evaluates the logic tree based on these changes and determines any resultant changes to other items in the tree. CRANS can also search for a common cause for multiple item failures, and allow the user to explore the logic tree from within the program. A "help" mode and a reference check provide the user with a means of exploring an item's underlying logic from within the program. A commonality check determines single point failures for an item or group of items. Output is in the form of a user-defined matrix or matrices of colored boxes, each box representing an item or set of items from the logic tree. Input is via mouse selection of the matrix boxes, using the mouse buttons to toggle the state of the item. CRANS is written in C-language and requires the MIT X Window System, Version 11 Revision 4 or Revision 5. It requires 78K of RAM for execution and a three button mouse. It has been successfully implemented on Sun4 workstations running SunOS, HP9000 workstations running HP-UX, and DECstations running ULTRIX. No executable is provided on the distribution medium; however

  17. RTMOD: Real-Time MODel evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Graziani, G; Galmarini, S. [Joint Research centre, Ispra (Italy); Mikkelsen, T. [Risoe National Lab., Wind Energy and Atmospheric Physics Dept. (Denmark)

    2000-01-01

    The 1998 - 1999 RTMOD project is a system based on an automated statistical evaluation for the inter-comparison of real-time forecasts produced by long-range atmospheric dispersion models for national nuclear emergency predictions of cross-boundary consequences. The background of RTMOD was the 1994 ETEX project that involved about 50 models run in several Institutes around the world to simulate two real tracer releases involving a large part of the European territory. In the preliminary phase of ETEX, three dry runs (i.e. simulations in real-time of fictitious releases) were carried out. At that time, the World Wide Web was not available to all the exercise participants, and plume predictions were therefore submitted to JRC-Ispra by fax and regular mail for subsequent processing. The rapid development of the World Wide Web in the second half of the nineties, together with the experience gained during the ETEX exercises suggested the development of this project. RTMOD featured a web-based user-friendly interface for data submission and an interactive program module for displaying, intercomparison and analysis of the forecasts. RTMOD has focussed on model intercomparison of concentration predictions at the nodes of a regular grid with 0.5 degrees of resolution both in latitude and in longitude, the domain grid extending from 5W to 40E and 40N to 65N. Hypothetical releases were notified around the world to the 28 model forecasters via the web on a one-day warning in advance. They then accessed the RTMOD web page for detailed information on the actual release, and as soon as possible they then uploaded their predictions to the RTMOD server and could soon after start their inter-comparison analysis with other modelers. When additional forecast data arrived, already existing statistical results would be recalculated to include the influence by all available predictions. The new web-based RTMOD concept has proven useful as a practical decision-making tool for realtime

  18. Evaluation of Real-Time Ground-Based GPS Meteorology

    Science.gov (United States)

    Fang, P.; Bock, Y.; Gutman, S.

    2003-04-01

    We demonstrate and evaluate a system to estimate zenith tropospheric delays in real time (5-10 minute latency) based on the technique of instantaneous GPS positioning as described by Bock et al. [2000] using data from the Orange County Real Time GPS Network. OCRTN is an upgrade of a sub-network of SCIGN sites in southern California to low latency (1-2 sec), high-rate (1 Hz) data streaming. Currently, ten sites are streaming data (Ashtech binary MBEN format) by means of dedicated, point-to-point radio modems to a network hub that translates the asynchronous serial data to TCP/IP and onto a PC workstation residing on a local area network. Software residing on the PC allows multiple clients to access the raw data simultaneously though TCP/IP. One of the clients is a Geodetics RTD server that receives and archives (1) the raw 1 Hz network data, (2) estimates of instantaneous positions and zenith tropospheric delays, and (3) RINEX data to decimated to 30 seconds. The network is composed of ten sites. The distribution of nine of the sites approximates a right triangle with two 60 km legs, and a tenth site on Catalina Island a distance of about 50 km (over water) from the hypotenuse of the triangle. Relative zenith delays are estimated every second with a latency less than a second. Median values are computed at a user-specified interval (e.g., 10 minutes) with outliers greater than 4 times the interquartile range rejected. We describe the results with those generated by our operational system using the GAMIT software, with a latency of 30-60 minutes. Earlier results (from a similar network) comparing 30-minute median RTD values to GAMIT 30-minute estimates indicate that the two solutions differ by about 1 cm. We also describe our approach to determining absolute zenith delays. If an Internet connection is available we will present a real-time demonstration. [Bock, Y., R. Nikolaidis, P. J. de Jonge, and M. Bevis, Instantaneous resolution of crustal motion at medium

  19. Internet-delivered acceptance-based behaviour therapy for generalized anxiety disorder: A randomized controlled trial.

    Science.gov (United States)

    Dahlin, Mats; Andersson, Gerhard; Magnusson, Kristoffer; Johansson, Tomas; Sjögren, Johan; Håkansson, Andreas; Pettersson, Magnus; Kadowaki, Åsa; Cuijpers, Pim; Carlbring, Per

    2016-02-01

    Generalized anxiety disorder (GAD) is a disabling condition which can be treated with cognitive behaviour therapy (CBT). The present study tested the effects of therapist-guided internet-delivered acceptance-based behaviour therapy on symptoms of GAD and quality of life. An audio CD with acceptance and mindfulness exercises and a separate workbook were also included in the treatment. Participants diagnosed with GAD (N = 103) were randomly allocated to immediate therapist-guided internet-delivered acceptance-based behaviour therapy or to a waiting-list control condition. A six month follow-up was also included. Results using hierarchical linear modelling showed moderate to large effects on symptoms of GAD (Cohen's d = 0.70 to 0.98), moderate effects on depressive symptoms (Cohen's d = 0.51 to 0.56), and no effect on quality of life. Follow-up data showed maintained effects. While there was a 20% dropout rate, sensitivity analyses showed that dropouts did not differ in their degree of change during treatment. To conclude, our study suggests that internet-delivered acceptance-based behaviour therapy can be effective in reducing the symptoms of GAD.

  20. Real-time treatment feedback guidance of Pleural PDT

    Science.gov (United States)

    Zhu, Timothy C.; Kim, Michele M.; Liang, Xing; Liu, Baochang; Meo, Julia L.; Finlay, Jarod C.; Dimofte, Andreea; Rodriguez, Carmen; Simone, Charles B.; Cengel, Keith; Friedberg, Joseph S.

    2015-01-01

    Pleural photodynamic therapy (PDT) has been used as an adjuvant treatment with lung-sparing surgical treatment for mesothelioma with remarkable results. In the current intrapleural PDT protocol, a moving fiber-based point source is used to deliver the light and the light dose are monitored by 7 detectors placed in the pleural cavity. To improve the delivery of light dose uniformity, an infrared (IR) camera system is used to track the motion of the light sources. A treatment planning system uses feedback from the detectors as well as the IR camera to update light fluence distribution in real-time, which is used to guide the light source motion for uniform light dose distribution. We have improved the GUI of the light dose calculation engine to provide real-time light fluence distribution suitable for guiding the surgery to delivery light more uniformly. A dual-correction method is used in the feedback system, so that fluence calculation can match detector readings using both direct and scatter light models. An improved measurement device is developed to automatically acquire laser position for the point source. Comparison of the effects of the guidance is presented in phantom study. PMID:25999647

  1. A real-time treatment guidance system for Pleural PDT

    Science.gov (United States)

    Zhu, Timothy C.; Liang, Xing; Sandell, Julia; Finlay, Jarod C.; Dimofte, Andreea; Rodriguez, Carmen; Cengel, Keith; Friedberg, Joseph; Hahn, Stephen M; Glatstein, Eli

    2015-01-01

    Intrapleural photodynamic therapy (PDT) has been used as an adjuvant treatment with lung-sparing surgical treatment for mesothelioma. In the current intrapleural PDT protocol, a moving fiber-based point source is used to deliver the light and the light dose are monitored by 7 detectors placed in the pleural cavity. To improve the delivery of light dose uniformity, an infrared (IR) camera system is used to track the motion of the light sources. A treatment planning system uses feedback from the detectors as well as the IR camera to update light fluence distribution in real-time, which is used to guide the light source motion for uniform light dose distribution. We have reported previously the success of using IR camera to passively monitor the light fluence rate distribution. In this study, the real-time feedback has been implemented in the current system prototype, by transferring data from the IR camera to a computer at a rate of 20 Hz, and by calculation/displaying using Matlab. A dual-correction method is used in the feedback system, so that fluence calculation can match detector readings. Preliminary data from a phantom showed superior light uniformity using this method. Light fluence uniformity from patient treatments is also shown using the correction method dose model. PMID:26005245

  2. A real-time treatment guidance system for pleural PDT

    Science.gov (United States)

    Zhu, Timothy C.; Liang, Xing; Sandell, Julia; Finlay, Jarod C.; Dimofte, Andreea; Rodriguez, Carmen; Cengel, Keith; Friedberg, Joseph; Hahn, Stephen M.; Glatstein, Eli

    2012-02-01

    Intrapleural photodynamic therapy (PDT) has been used as an adjuvant treatment with lung-sparing surgical treatment for mesothelioma. In the current intrapleural PDT protocol, a moving fiber-based point source is used to deliver the light and the light dose are monitored by 7 detectors placed in the pleural cavity. To improve the delivery of light dose uniformity, an infrared (IR) camera system is used to track the motion of the light sources. A treatment planning system uses feedback from the detectors as well as the IR camera to update light fluence distribution in real-time, which is used to guide the light source motion for uniform light dose distribution. We have reported previously the success of using IR camera to passively monitor the light fluence rate distribution. In this study, the real-time feedback has been implemented in the current system prototype, by transferring data from the IR camera to a computer at a rate of 20 Hz, and by calculation/displaying using Matlab. A dual-correction method is used in the feedback system, so that fluence calculation can match detector readings. Preliminary data from a phantom showed superior light uniformity using this method. Light fluence uniformity from patient treatments is also shown using the correction method dose model.

  3. Real-time treatment feedback guidance of Pleural PDT

    Science.gov (United States)

    Zhu, Timothy C.; Kim, Michele M.; Liang, Xing; Liu, Baochang; Meo, Julia L.; Finlay, Jarod C.; Dimofte, Andreea; Rodriguez, Carmen; Simone, Charles; Cengel, Keith; Friedberg, Joseph

    2013-03-01

    Pleural photodynamic therapy (PDT) has been used as an adjuvant treatment with lung-sparing surgical treatment for mesothelioma with remarkable results. In the current intrapleural PDT protocol, a moving fiber-based point source is used to deliver the light and the light dose are monitored by 7 detectors placed in the pleural cavity. To improve the delivery of light dose uniformity, an infrared (IR) camera system is used to track the motion of the light sources. A treatment planning system uses feedback from the detectors as well as the IR camera to update light fluence distribution in real-time, which is used to guide the light source motion for uniform light dose distribution. We have improved the GUI of the light dose calculation engine to provide real-time light fluence distribution suitable for guiding the surgery to delivery light more uniformly. A dual-correction method is used in the feedback system, so that fluence calculation can match detector readings using both direct and scatter light models. An improved measurement device is developed to automatically acquire laser position for the point source. Comparison of the effects of the guidance is presented in phantom study.

  4. Application of real-time GPS to earthquake early warning

    National Research Council Canada - National Science Library

    Richard M. Allen; Alon Ziv

    2011-01-01

      Real-time GPS can provide static-offset observations during an earthquake Real-time GPS provides a robust constrain on magnitude for warnings GPS networks should be used as a companion to seismic...

  5. The Colliderscope: a real-time show

    CERN Multimedia

    Francesco Poppi

    2010-01-01

    Ninety-six LED lights distributed over the facade of the Niels Bohr Institute (NBI) in Blegdamsvej (Denmark) reproduce the actual signals coming from the Transition Radiation Detector (TRT) in ATLAS. Thanks to the Colliderscope, when a collision occurs below the ground in Geneva, people passing by in Blegdamsvej will be aware of it almost in real-time.   Niels Bohr Institute facade lit up to reflect the latest data from ATLAS-TRT . The pattern, intensity and duration of the Colliderscope’s flashes of light depend on the physical parameters of particles crossing the ATLAS TRT detector. “At the Colliderscope very little happens randomly”, explains Troels Petersen, a physicist at NBI and one of the people who conceived it. “Particularly interesting events, such as electrons, are shown by a bright light that remains on the facade for several seconds”. The Niels Bohr Institute has participated in the development of the TRT detector, and this is why t...

  6. Business Hypervisors for Real-time Applications

    Directory of Open Access Journals (Sweden)

    L. Perneel

    2015-08-01

    Full Text Available System virtualization is one of the hottest trends in information technology today. It is not just another nice to use technology but has become fundamental across the business world. It is successfully used with many business application classes where cloud computing is the most visual one. Recently, it started to be used for soft Real-Time (RT applications such as IP telephony, media servers, audio and video streaming servers, automotive and communication systems in general. Running these applications on a traditional system (Hardware + Operating System guarantee their Quality of Service (QoS; virtualizing them means inserting a new layer between the hardware and the (virtual Operating System (OS, and thus adding extra overhead. Although these applications’ areas do not always demand hard time guarantees, they require the underlying virtualization layer supports low latency and provide adequate computational resources for completion within a reasonable or predictable timeframe. These aspects are intimately intertwined with the logic of the hypervisor scheduler. In this paper, a series of tests are conducted on three hypervisors (VMware ESXi, Hyper-V server and Xen to provide a benchmark of the latencies added to the applications running on top of them. These tests are conducted for different scenarios (use cases to take into consideration all the parameters and configurations of the hypervisors’ schedulers. Finally, this benchmark can be used as a reference for choosing the best hypervisor-application combination.

  7. Real-time flexible preventive maintenance scheduling.

    Science.gov (United States)

    Kendall, E B; Cronk, J W; White, R N

    1993-01-01

    There are still obstacles to overcome as we enter the programming phase of this project. We envision an automated system, similar to an expert system, that performs the interval/history analysis and makes the changes. Initially a field will need to be added to the inventory to denote whether a device belongs to one of the previously described groups that are exempt from interval changes. An intermediate step will be the formatting of a periodic report showing equipment that meets the change criteria as described in the two rules. For now, the actual changes would be reviewed and made by our management and technical staff. This report would be retained as documentation of the basis for each change, for our own benefit and to meet JCAHO requirements. We are still discussing whether the repair count should include all repairs (user error, abuse, unpredictable failure, etc.) or just those that are "significant and preventable" and could have been averted by PM. This is perhaps a question whose answer might vary from hospital to hospital, depending upon size and patient mix. With more emphasis being placed on process outcomes, on quality of work, and on getting the most benefit for our efforts, we believe our flexible, real-time PM scheduling program is a major step in the right direction. It is outcome-driven and it focuses resources where they are needed the most.

  8. Real time model for public transportation management

    Directory of Open Access Journals (Sweden)

    Ireneusz Celiński

    2014-03-01

    Full Text Available Background: The article outlines managing a public transportation fleet in the dynamic aspect. There are currently many technical possibilities of identifying demand in the transportation network. It is also possible to indicate legitimate basis of estimating and steering demand. The article describes a general public transportation fleet management concept based on balancing demand and supply. Material and methods: The presented method utilizes a matrix description of demand for transportation based on telemetric and telecommunication data. Emphasis was placed mainly on a general concept and not the manner in which data was collected by other researchers.  Results: The above model gave results in the form of a system for managing a fleet in real-time. The objective of the system is also to optimally utilize means of transportation at the disposal of service providers. Conclusions: The presented concept enables a new perspective on managing public transportation fleets. In case of implementation, the project would facilitate, among others, designing dynamic timetables, updated based on observed demand, and even designing dynamic points of access to public transportation lines. Further research should encompass so-called rerouting based on dynamic measurements of the characteristics of the transportation system.

  9. Recommendations for Real-Time Speech MRI

    Science.gov (United States)

    Lingala, Sajan Goud; Sutton, Brad P.; Miquel, Marc E.; Nayak, Krishna S.

    2016-01-01

    Real-time magnetic resonance imaging (RT-MRI) is being increasingly used for speech and vocal production research studies. Several imaging protocols have emerged based on advances in RT-MRI acquisition, reconstruction, and audio-processing methods. This review summarizes the state-of-the-art, discusses technical considerations, and provides specific guidance for new groups entering this field. We provide recommendations for performing RT-MRI of the upper airway. This is a consensus statement stemming from the ISMRM-endorsed Speech MRI summit held in Los Angeles, February 2014. A major unmet need identified at the summit was the need for consensus on protocols that can be easily adapted by researchers equipped with conventional MRI systems. To this end, we provide a discussion of tradeoffs in RT-MRI in terms of acquisition requirements, a priori assumptions, artifacts, computational load, and performance for different speech tasks. We provide four recommended protocols and identify appropriate acquisition and reconstruction tools. We list pointers to open-source software that facilitate implementation. We conclude by discussing current open challenges in the methodological aspects of RT-MRI of speech. PMID:26174802

  10. Real-time optoacoustic monitoring of stroke

    Science.gov (United States)

    Kneipp, Moritz; Turner, Jake; Hambauer, Sebastian; Krieg, Sandro M.; Lehmberg, Jens; Lindauer, Ute; Razansky, Daniel

    2014-03-01

    Characterizing disease progression and identifying possible therapeutic interventions in stroke is greatly aided by the use of longitudinal function imaging studies. In this study, we investigate the applicability of real-time multispectral optoacoustic tomography (MSOT) as a tool for non-invasive monitoring of the progression of stroke in the whole brain. The middle cerebral artery occlusion (MCAO) method was used to induce stroke. Mice were imaged under isoflurane anesthesia preoperatively and at several time points during and after the 60-minute occlusion. The animals were sacrificed after 24 hours and their excised brains frozen at -80°C for sectioning. The cryosection were stained using H&E staining to identify the ischemic lesion. Major vessels are readily identifiable in the whole mouse head in the in vivo optoacoustic scans. During ischemia, a reduction in cerebral blood volume is detectable in the cortex. Post ischemia, spectral unmixing of the optoacoustic signals shows an asymmetry of the deoxygenated hemoglobin in the hemisphere affected by MCAO. This hypoxic area was mainly located around the boundary of the ischemic lesion and was therefore identified as the ischemic penumbra. Non-invasive functional MSOT imaging is able to visualize the hypoxic penumbra in brains affected by stroke. Stopping the spread of the infarct area and revitalizing the penumbra is central in stroke research, this new imaging technique may therefore prove to be a valuable tool in the monitoring and developing new treatments.

  11. Real-time Detection of Locked Modes

    Science.gov (United States)

    Angelini, S.; Granetz, R. S.; Wolfe, S. M.

    2007-11-01

    Disruptions are one of the largest problems facing tokamaks. In a large-scale experiment such as ITER, disruptions would cause crippling damage and severe setbacks in experimentation. One method for disruption mitigation involves the use of a gas jet which has been tested on both normally running plasmas and vertical displacement events (VDEs) on Alcator C-Mod. In both cases, the jet was successful in mitigating disruption effects. The gas jet has not yet been tested on other types of disruptions. Locked-mode major disruptions are easily created in C-Mod and could be used to test the effectiveness of the gas jet as a mitigation method if the jet could be fired early enough. It has been empirically observed that the electron cyclotron emissions (ECE) signal displays a flattening of the normally-present sawteeth before the current quench occurs in certain locked-mode major disruptions. A procedure is being written which will detect the ECE flattening by reading changes in the standard deviation of the signal. This procedure will be programmed into the digital plasma control system (DPCS) for real-time testing.

  12. Real-time DIRCM system modeling

    Science.gov (United States)

    Petersson, Mikael

    2004-12-01

    Directed infrared countermeasures (DIRCM) play an increasingly important role in electronic warfare to counteract threats posed by infrared seekers. The usefulness and performance of such countermeasures depend, for example, on atmospheric conditions (attenuation and turbulence) and platform vibrations, causing pointing and tracking errors for the laser beam and reducing the power transferred to the seeker aperture. These problems make it interesting to simulate the performance of a DIRCM system in order to understand how easy or difficult it is to counteract an approaching threat and evaluate limiting factors in various situations. This paper describes a DIRCM model that has been developed, including atmospheric effects such as attenuation and turbulence as well as closed loop tracking algorithms, where the retro reflex of the laser is used for the pointing control of the beam. The DIRCM model is part of a large simulation framework (EWSim), which also incorporates several descriptions of different seekers (e.g. reticle, rosette, centroid, nutating cross) and models of robot dynamics. Effects of a jamming laser on a specific threat can be readily verified by simulations within this framework. The duel between missile and countermeasure is simulated in near real-time and visualized graphically in 3D. A typical simulation with a reticle seeker jammed by a modulated laser is included in the paper.

  13. Real-Time Principal-Component Analysis

    Science.gov (United States)

    Duong, Vu; Duong, Tuan

    2005-01-01

    A recently written computer program implements dominant-element-based gradient descent and dynamic initial learning rate (DOGEDYN), which was described in Method of Real-Time Principal-Component Analysis (NPO-40034) NASA Tech Briefs, Vol. 29, No. 1 (January 2005), page 59. To recapitulate: DOGEDYN is a method of sequential principal-component analysis (PCA) suitable for such applications as data compression and extraction of features from sets of data. In DOGEDYN, input data are represented as a sequence of vectors acquired at sampling times. The learning algorithm in DOGEDYN involves sequential extraction of principal vectors by means of a gradient descent in which only the dominant element is used at each iteration. Each iteration includes updating of elements of a weight matrix by amounts proportional to a dynamic initial learning rate chosen to increase the rate of convergence by compensating for the energy lost through the previous extraction of principal components. In comparison with a prior method of gradient-descent-based sequential PCA, DOGEDYN involves less computation and offers a greater rate of learning convergence. The sequential DOGEDYN computations require less memory than would parallel computations for the same purpose. The DOGEDYN software can be executed on a personal computer.

  14. Real-Time Accumulative Computation Motion Detectors

    Directory of Open Access Journals (Sweden)

    Saturnino Maldonado-Bascón

    2009-12-01

    Full Text Available The neurally inspired accumulative computation (AC method and its application to motion detection have been introduced in the past years. This paper revisits the fact that many researchers have explored the relationship between neural networks and finite state machines. Indeed, finite state machines constitute the best characterized computational model, whereas artificial neural networks have become a very successful tool for modeling and problem solving. The article shows how to reach real-time performance after using a model described as a finite state machine. This paper introduces two steps towards that direction: (a A simplification of the general AC method is performed by formally transforming it into a finite state machine. (b A hardware implementation in FPGA of such a designed AC module, as well as an 8-AC motion detector, providing promising performance results. We also offer two case studies of the use of AC motion detectors in surveillance applications, namely infrared-based people segmentation and color-based people tracking, respectively.

  15. Acceptance and commitment therapy as a treatment for problematic internet pornography viewing.

    Science.gov (United States)

    Twohig, Michael P; Crosby, Jesse M

    2010-09-01

    Despite the prevalence of problematic Internet pornography viewing and the breadth of intervention approaches to potentially address it, no studies to address this problem have been reported to date. An emerging treatment approach, Acceptance and Commitment Therapy (ACT), holds promise as a treatment for Internet pornography viewing because of its focus on processes hypothesized to underlie this maladaptive behavior. In the first experiment on the treatment of problematic Internet pornography viewing, 6 adult males who reported that their Internet pornography viewing was affecting their quality of life were treated in eight 1.5-hour sessions of ACT for problematic pornography viewing. The effects of the intervention were assessed in a multiple-baseline-across-participants design with time viewing pornography as the dependent variable. Treatment resulted in an 85% reduction in viewing at posttreatment with results being maintained at 3-month follow-up (83% reduction). Increases were seen on measures of quality of life, and reductions were seen on measures of OCD and scrupulosity. Weekly measures of ACT-consistent processes showed reductions that corresponded with reductions in viewing. Large reductions were seen on a measure of psychological flexibility, and minor reductions were seen on measures of thought-action fusion and thought control. Overall, results suggest the promise of ACT as a treatment for problematic Internet pornography viewing and the value of future randomized trials of this approach.

  16. Internet-delivered cognitive therapy for PTSD: a development pilot series

    Directory of Open Access Journals (Sweden)

    Jennifer Wild

    2016-11-01

    Full Text Available Background: Randomised controlled trials have established that face-to-face cognitive therapy for posttraumatic stress disorder (CT-PTSD based on Ehlers and Clark's cognitive model of PTSD is highly effective and feasible with low rates of dropout. Access to evidence-based psychological treatments for PTSD is insufficient. Several studies have shown that therapist-assisted treatment delivery over the Internet is a promising way of improving access to cognitive behavioural therapy interventions. Objective: To develop an Internet version of CT-PTSD that significantly reduces therapist contact time without compromising treatment integrity or retention rates. Methods: We describe the development of an Internet version of CT-PTSD. It implements all the key procedures of face-to-face CT-PTSD, including techniques that focus on the trauma memory, such as memory updating, stimulus discrimination and revisiting the trauma site, as well as restructuring individually relevant appraisals relating to overgeneralisation of danger, guilt, shame or anger, behavioural experiments and planning activities to reclaim quality of life. A cohort of 10 patients meeting DSM-IV criteria for PTSD worked through the programme, with remote guidance from a therapist, and they were assessed at pre- and post-treatment on PTSD outcome, mood, work and social adjustment and process measures. Results: No patients dropped out. Therapists facilitated the treatment with 192 min of contact time per patient, plus 57 min for reviewing the patient's progress and messages. Internet-delivered CT-PTSD was associated with very large improvements on all outcome and process measures, with 80% of patients achieving clinically significant change and remission from PTSD. Conclusions: Internet-delivered cognitive therapy for PTSD (iCT-PTSD appears to be an acceptable and efficacious treatment. Therapist time was reduced to less than 25% of time in face-to-face CT-PTSD. Randomised controlled trials

  17. Cluster Computing For Real Time Seismic Array Analysis.

    Science.gov (United States)

    Martini, M.; Giudicepietro, F.

    A seismic array is an instrument composed by a dense distribution of seismic sen- sors that allow to measure the directional properties of the wavefield (slowness or wavenumber vector) radiated by a seismic source. Over the last years arrays have been widely used in different fields of seismological researches. In particular they are applied in the investigation of seismic sources on volcanoes where they can be suc- cessfully used for studying the volcanic microtremor and long period events which are critical for getting information on the volcanic systems evolution. For this reason arrays could be usefully employed for the volcanoes monitoring, however the huge amount of data produced by this type of instruments and the processing techniques which are quite time consuming limited their potentiality for this application. In order to favor a direct application of arrays techniques to continuous volcano monitoring we designed and built a small PC cluster able to near real time computing the kinematics properties of the wavefield (slowness or wavenumber vector) produced by local seis- mic source. The cluster is composed of 8 Intel Pentium-III bi-processors PC working at 550 MHz, and has 4 Gigabytes of RAM memory. It runs under Linux operating system. The developed analysis software package is based on the Multiple SIgnal Classification (MUSIC) algorithm and is written in Fortran. The message-passing part is based upon the LAM programming environment package, an open-source imple- mentation of the Message Passing Interface (MPI). The developed software system includes modules devote to receiving date by internet and graphical applications for the continuous displaying of the processing results. The system has been tested with a data set collected during a seismic experiment conducted on Etna in 1999 when two dense seismic arrays have been deployed on the northeast and the southeast flanks of this volcano. A real time continuous acquisition system has been simulated by

  18. Real-time satellite monitoring of volcanic hot spots

    Science.gov (United States)

    Harris, Andrew J. L.; Flynn, Luke P.; Dean, Ken; Pilger, Eric; Wooster, Martin; Okubo, Chris; Mouginis-Mark, Peter; Garbeil, Harold; Thornber, Carl; De la Cruz-Reyna, Servando; Rothery, Dave; Wright, Robert

    Direct satellite data reception at high temporal frequencies and automated processing enable near-real-time, near-continuous thermal monitoring of volcanoes. We review what has been achieved in terms of turning this capability into real-time tools of use to volcano monitoring agencies. Current capabilities focus on 2 instruments: the advanced very high resolution radiometer (AVHRR) and the Geostationary Operational Environmental Satellite (GOES) imager. Collection of lO AVHRR images per day covering Alaska, the Aleutians, and Kamchatka allows routine, on-reception analysis of volcanic hot spots across this region. Data collected between 1996 and 1998 detected 302 hot spots due to lava flows, lava domes, pyroclastic flows, fumaroles, and geothermally heated lakes at 12 different volcanoes. Information was used for hazard mitigation by the Alaskan Volcano Observatory. GOES provides data for North and South American volcanoes every 15-30 minutes. Automated processing allows eruption information and alerts to be posted on the Internet within 15-60 minutes of reception. We use June 1998 to demonstrate the frequency of data acquisition. During this month 2879 GOES images were collected from which 14,832 sub-images of 6 active volcanoes were processed. Although 82% (12,200) of these sub-images were cloud covered, hot spots were still evident on 11% (1634) of the sub-images. Analysis of GOES data for 1998 identified hot spots due to (1) lava flows at Kilauea and Cerro Azul, (2) dome extrusion and explosive activity at Lascar, Popocatepetl, Colima and Pacaya, and (3) dome cooling and collapse at Soufriere Hills. We were also able to suggest that reports of lava flow activity at Cerro Negro were false. This information was supplied to, and used by, various agencies whose task it is to monitor these volcanoes. Global thermal monitoring will become a reality with the launch of the Earth Observing System's moderate resolution imaging spectrometer (MODIS). An automated thermal

  19. Experiences of non-adherence to Internet-delivered cognitive behavior therapy: A qualitative study

    Directory of Open Access Journals (Sweden)

    Olof Johansson

    2015-05-01

    Full Text Available Many trials on Internet-delivered psychological treatments have had problems with nonadherence, but not much is known about the subjective reasons for non-adhering. The aim of this study was to explore participants' experiences of non-adherence to Internet-delivered psychological treatment. Grounded theory was used to analyze data from seven in-depth interviews with persons who had non-adhered to a study on Internet-delivered cognitive behavioral therapy for generalized anxiety disorder. The process of non-adherence is described as an interaction between patient factors and treatment factors. A working model theory was generated to illustrate the experience of nonadherence. The model describes a process where treatment features such as workload, text-content complexity and treatment process don't match personal prerequisites regarding daily routines, perceived language skills and treatment expectations respectively, resulting in the decision to nonadhere. Negative effects were also stated as a reason for non-adherence. Several common strategies used for increasing adherence to Internet-delivered therapy in general are by these non-completers regarded as factors directly related to their reason for non-adherence.

  20. Execution of a High Level Real-Time Language

    OpenAIRE

    Luqi; Berzins, Valdis

    1988-01-01

    Prototype System Description Language (PSDL) is a high level real-time language with special features for hard real-time system specification and design. It can be used to firm up requirements through execution of its software prototypes The language is designed based on a real-time model merging data and control flow and its implementation is beyond conventional compiler technology because of the need to meet real-time constraints. In this paper we describe and illustrate our research result...

  1. A Real-Time Linux for Multicore Platforms

    Science.gov (United States)

    2013-12-20

    Multicore Platforms, 25th Euromicro Conference on Real-TimeSystems. 09-JUL-13, . : , Jeremy Erickson, James Anderson. Reducing Tardiness Under Global...Baruah. "Improved tardiness bounds for Global EDF," Proceedings of the EuroMicro Conference on Real-Time Systems, Brussels, Belgium, IEEE Computer...missed. In a soft real-time application, some deadline tardiness is permissible. In the definition of "soft real-time" that we have focused on

  2. Survey of real-time processing systems for big data

    DEFF Research Database (Denmark)

    Liu, Xiufeng; Lftikhar, Nadeem; Xie, Xike

    2014-01-01

    for big data; Its open-source implementation such as Hadoop has become the de-facto standard for processing big data, however, Hadoop has the limitation of supporting real-time updates. The improvements in Hadoop for the real-time capability, and the other alternative real-time frameworks have been...

  3. Internet-based Cognitive Behavioral Therapy for Adolescents with Anxiety Disorders: A Feasibility Study

    DEFF Research Database (Denmark)

    Nielsen, Amalie; Gaardsvig, Majken Maria; Stjerneklar, Silke

    Aim Only a small proportion of children and adolescents with anxiety disorders receive treatment, despite evidence of the efficacy of CBT (cognitive behavioral therapy) (Reynolds, Wilson, Austin & Hooper, 2012). Lately there has been an increase in the development of ICBT (internet-based CBT) pro......-based cognitive-behavioral treatments for anxiety. J Clin Psychol, 65, 53-75.Reynolds, S., Wilson, C., Austin, J., & Hooper, L. (2012). Effects of psychotherapy for anxiety in children and adolescents: A meta-analytic review. Clinical Psychology Review, 32(4), 251-262.......Aim Only a small proportion of children and adolescents with anxiety disorders receive treatment, despite evidence of the efficacy of CBT (cognitive behavioral therapy) (Reynolds, Wilson, Austin & Hooper, 2012). Lately there has been an increase in the development of ICBT (internet-based CBT...

  4. A RED modified weighted moving average for soft real-time application

    Directory of Open Access Journals (Sweden)

    Domanśka Joanna

    2014-09-01

    Full Text Available The popularity of TCP/IP has resulted in an increase in usage of best-effort networks for real-time communication. Much effort has been spent to ensure quality of service for soft real-time traffic over IP networks. The Internet Engineering Task Force has proposed some architecture components, such as Active Queue Management (AQM. The paper investigates the influence of the weighted moving average on packet waiting time reduction for an AQM mechanism: the RED algorithm. The proposed method for computing the average queue length is based on a difference equation (a recursive equation. Depending on a particular optimality criterion, proper parameters of the modified weighted moving average function can be chosen. This change will allow reducing the number of violations of timing constraints and better use of this mechanism for soft real-time transmissions. The optimization problem is solved through simulations performed in OMNeT++ and later verified experimentally on a Linux implementation

  5. Real time PV manufacturing diagnostic system

    Energy Technology Data Exchange (ETDEWEB)

    Kochergin, Vladimir [MicroXact Inc., Blacksburg, VA (United States); Crawford, Michael A. [MicroXact Inc., Blacksburg, VA (United States)

    2015-09-01

    The main obstacle Photovoltaic (PV) industry is facing at present is the higher cost of PV energy compared to that of fossil energy. While solar cell efficiencies continue to make incremental gains these improvements are so far insufficient to drive PV costs down to match that of fossil energy. Improved in-line diagnostics however, has the potential to significantly increase the productivity and reduce cost by improving the yield of the process. On this Phase I/Phase II SBIR project MicroXact developed and demonstrated at CIGS pilot manufacturing line a high-throughput in-line PV manufacturing diagnostic system, which was verified to provide fast and accurate data on the spatial uniformity of thickness, an composition of the thin films comprising the solar cell as the solar cell is processed reel-to-reel. In Phase II project MicroXact developed a stand-alone system prototype and demonstrated the following technical characteristics: 1) ability of real time defect/composition inconsistency detection over 60cm wide web at web speeds up to 3m/minute; 2) Better than 1mm spatial resolution on 60cm wide web; 3) an average better than 20nm spectral resolution resulting in more than sufficient sensitivity to composition imperfections (copper-rich and copper-poor regions were detected). The system was verified to be high vacuum compatible. Phase II results completely validated both technical and economic feasibility of the proposed concept. MicroXact’s solution is an enabling technique for in-line PV manufacturing diagnostics to increase the productivity of PV manufacturing lines and reduce the cost of solar energy, thus reducing the US dependency on foreign oil while simultaneously reducing emission of greenhouse gasses.

  6. Real-Time Gender Classification by Face

    Directory of Open Access Journals (Sweden)

    Eman Fares Al Mashagba

    2016-03-01

    Full Text Available The identification of human beings based on their biometric body parts, such as face, fingerprint, gait, iris, and voice, plays an important role in electronic applications and has become a popular area of research in image processing. It is also one of the most successful applications of computer–human interaction and understanding. Out of all the abovementioned body parts,the face is one of most popular traits because of its unique features.In fact, individuals can process a face in a variety of ways to classify it by its identity, along with a number of other characteristics, such as gender, ethnicity, and age. Specifically, recognizing human gender is important because people respond differently according to gender. In this paper, we present a robust method that uses global geometry-based features to classify gender and identify age and human beings from video sequences. The features are extracted based on face detection using skin color segmentation and the computed geometric features of the face ellipse region. These geometric features are then used to form the face vector trajectories, which are inputted to a time delay neural network and are trained using the Broyden–Fletcher–Goldfarb–Shanno (BFGS function. Results show that using the suggested method with our own dataset under an unconstrained condition achieves a 100% classification rate in the training set for all application, as well as 91.2% for gender classification, 88% for age identification, and 83% for human identification in the testing set. In addition, the proposed method establishes the real-time system to be used in three applications with a simple computation for feature extraction.

  7. Variational optical flow computation in real time.

    Science.gov (United States)

    Bruhn, Andrés; Weickert, Joachim; Feddern, Christian; Kohlberger, Timo; Schnörr, Christoph

    2005-05-01

    This paper investigates the usefulness of bidirectional multigrid methods for variational optical flow computations. Although these numerical schemes are among the fastest methods for solving equation systems, they are rarely applied in the field of computer vision. We demonstrate how to employ those numerical methods for the treatment of variational optical flow formulations and show that the efficiency of this approach even allows for real-time performance on standard PCs. As a representative for variational optic flow methods, we consider the recently introduced combined local-global method. It can be considered as a noise-robust generalization of the Horn and Schunck technique. We present a decoupled, as well as a coupled, version of the classical Gauss-Seidel solver, and we develop several multgrid implementations based on a discretization coarse grid approximation. In contrast, with standard bidirectional multigrid algorithms, we take advantage of intergrid transfer operators that allow for nondyadic grid hierarchies. As a consequence, no restrictions concerning the image size or the number of traversed levels have to be imposed. In the experimental section, we juxtapose the developed multigrid schemes and demonstrate their superior performance when compared to unidirectional multgrid methods and nonhierachical solvers. For the well-known 316 x 252 Yosemite sequence, we succeeded in computing the complete set of dense flow fields in three quarters of a second on a 3.06-GHz Pentium4 PC. This corresponds to a frame rate of 18 flow fields per second which outperforms the widely-used Gauss-Seidel method by almost three orders of magnitude.

  8. Real-time dynamic imaging of virus distribution in vivo.

    Directory of Open Access Journals (Sweden)

    Sean E Hofherr

    Full Text Available The distribution of viruses and gene therapy vectors is difficult to assess in a living organism. For instance, trafficking in murine models can usually only be assessed after sacrificing the animal for tissue sectioning or extraction. These assays are laborious requiring whole animal sectioning to ascertain tissue localization. They also obviate the ability to perform longitudinal or kinetic studies in one animal. To track viruses after systemic infection, we have labeled adenoviruses with a near-infrared (NIR fluorophore and imaged these after intravenous injection in mice. Imaging was able to track and quantitate virus particles entering the jugular vein simultaneous with injection, appearing in the heart within 500 milliseconds, distributing in the bloodstream and throughout the animal within 7 seconds, and that the bulk of virus distribution was essentially complete within 3 minutes. These data provide the first in vivo real-time tracking of the rapid initial events of systemic virus infection.

  9. Signaletic, haptic and real-time material

    DEFF Research Database (Denmark)

    Thomsen, Bodil Marie Stavning

    2012-01-01

    signal was developed from Norbert Wiener’s writings on mathematics and cybernetics. The electronic signal is a technological fact dating back to the telegraph that in a substantial way set the agenda for contemporary (popular) culture (electronic music, youth, and performance culture) and further......This introductory article to the following ‘‘cluster of articles’’ proposes to apply the term ‘‘signal’’ as a theoretical and analytical category for a new approach to the bearings of electronic and new media in particular. As the term ‘‘sign’’ was formerly developed from linguistics, the term...... facilitated the digital code and the Internet. In this article, as well as in the following articles, the term signal is above all applied in its broader sense to explore possible signaletic modes and characteristics in contemporary art and new media culture. It is thus a key point that technological...

  10. ControlShell - A real-time software framework

    Science.gov (United States)

    Schneider, Stanley A.; Ullman, Marc A.; Chen, Vincent W.

    1991-01-01

    ControlShell is designed to enable modular design and impplementation of real-time software. It is an object-oriented tool-set for real-time software system programming. It provides a series of execution and data interchange mechansims that form a framework for building real-time applications. These mechanisms allow a component-based approach to real-time software generation and mangement. By defining a set of interface specifications for intermodule interaction, ControlShell provides a common platform that is the basis for real-time code development and exchange.

  11. Interactive real-time media streaming with reliable communication

    Science.gov (United States)

    Pan, Xunyu; Free, Kevin M.

    2014-02-01

    Streaming media is a recent technique for delivering multimedia information from a source provider to an end- user over the Internet. The major advantage of this technique is that the media player can start playing a multimedia file even before the entire file is transmitted. Most streaming media applications are currently implemented based on the client-server architecture, where a server system hosts the media file and a client system connects to this server system to download the file. Although the client-server architecture is successful in many situations, it may not be ideal to rely on such a system to provide the streaming service as users may be required to register an account using personal information in order to use the service. This is troublesome if a user wishes to watch a movie simultaneously while interacting with a friend in another part of the world over the Internet. In this paper, we describe a new real-time media streaming application implemented on a peer-to-peer (P2P) architecture in order to overcome these challenges within a mobile environment. When using the peer-to-peer architecture, streaming media is shared directly between end-users, called peers, with minimal or no reliance on a dedicated server. Based on the proposed software pɛvμa (pronounced [revma]), named for the Greek word meaning stream, we can host a media file on any computer and directly stream it to a connected partner. To accomplish this, pɛvμa utilizes the Microsoft .NET Framework and Windows Presentation Framework, which are widely available on various types of windows-compatible personal computers and mobile devices. With specially designed multi-threaded algorithms, the application can stream HD video at speeds upwards of 20 Mbps using the User Datagram Protocol (UDP). Streaming and playback are handled using synchronized threads that communicate with one another once a connection is established. Alteration of playback, such as pausing playback or tracking to a

  12. Authenticating Sensitive Speech-Recitation in Distance-Learning Applications using Real-Time Audio Watermarking

    Directory of Open Access Journals (Sweden)

    Omar Tayan

    2016-06-01

    Full Text Available Thispaper focuses on audio-watermarking authentication and integrity-protection within the context of the speech-data transmitted over the Internet in a real-time learning environment.The Arabic Quran recitation through distance learning is used as a case-study example that is characteristic of sensitive data requiring robust authentication and integrity measures. Thisworkproposes an approach for the purpose ofauthenticating and validatingaudio-data transmitted by a publisher or during communications between an instructor and students reciting via Internet communications.The watermarking approach proposed here is based on detection of the key patternswithin the audio signal as an input to the algorithm before the embedding phase is performed.The developed application could be easily used at both sides of the communication for ensuring authenticity and integrity of the transmitted speech signal and is proved effective for many distance-learning applications that require low-complexity processing in real-time.

  13. Satellite clock corrections estimation to accomplish real time ppp: experiments for brazilian real time network

    Science.gov (United States)

    Marques, Haroldo; Monico, João; Aquino, Marcio; Melo, Weyller

    2014-05-01

    The real time PPP method requires the availability of real time precise orbits and satellites clocks corrections. Currently, it is possible to apply the solutions of clocks and orbits available by BKG within the context of IGS Pilot project or by using the operational predicted IGU ephemeris. The accuracy of the satellite position available in the IGU is enough for several applications requiring good quality. However, the satellites clocks corrections do not provide enough accuracy (3 ns ~ 0.9 m) to accomplish real time PPP with the same level of accuracy. Therefore, for real time PPP application it is necessary to further research and develop appropriated methodologies for estimating the satellite clock corrections in real time with better accuracy. Currently, it is possible to apply the real time solutions of clocks and orbits available by Federal Agency for Cartography and Geodesy (BKG) within the context of IGS Pilot project. The BKG corrections are disseminated by a new proposed format of the RTCM 3.x and can be applied in the broadcasted orbits and clocks. Some investigations have been proposed for the estimation of the satellite clock corrections using GNSS code and phase observable at the double difference level between satellites and epochs (MERVAT, DOUSA, 2007). Another possibility consists of applying a Kalman Filter in the PPP network mode (HAUSCHILD, 2010) and it is also possible the integration of both methods, using network PPP and observables at double difference level in specific time intervals (ZHANG; LI; GUO, 2010). For this work the methodology adopted consists in the estimation of the satellite clock corrections based on the data adjustment in the PPP mode, but for a network of GNSS stations. The clock solution can be solved by using two types of observables: code smoothed by carrier phase or undifferenced code together with carrier phase. In the former, we estimate receiver clock error; satellite clock correction and troposphere, considering

  14. TeleOph: a secure real-time teleophthalmology system.

    Science.gov (United States)

    Wu, Yongdong; Wei, Zhou; Yao, Haixia; Zhao, Zhigang; Ngoh, Lek Heng; Deng, Robert H; Yu, Shengsheng

    2010-09-01

    Teleophthalmology (TeleOph) is an electronic counterpart of today's face-to-face, patient-to-specialist ophthalmology system. It enables one or more ophthalmologists to remotely examine a patient's condition via a confidential and authentic communication channel. Specifically, TeleOph allows a trained nonspecialist in a primary clinic to screen the patients with digital instruments (e.g., camera, ophthalmoscope). The acquired medical data are delivered to the hospital where an ophthalmologist will review the data collected and, if required, provide further consultation for the patient through a real-time secure channel established over a public Internet network. If necessary, the ophthalmologist is able to further sample the images/video of the patient's eyes remotely. In order to increase the productivity of the ophthalmologist in terms of number of patients reviewed, and to increase the efficiency of network resource, we manage the network bandwidth based on a Poisson model to estimate patient arrival at the clinics, and the rate of ophthalmologist consultation service for better overall system efficiency. The main objective of TeleOph is therefore to provide the remote patients with a cost-effective access to specialist's eye checkups at primary healthcare clinics, and at the same time, minimize unnecessary face-to-face consultation at the hospital specialist's center.

  15. Real Time Wide Area Radiation Surveillance System

    Science.gov (United States)

    Biafore, M.

    2012-04-01

    We present the REWARD project, financed within the FP7 programme, theme SEC-2011.1.5-1 (Development of detection capabilities of difficult to detect radioactive sources and nuclear materials - Capability Project). Within this project, we propose a novel mobile system for real time, wide area radiation surveillance. The system is based on the integration of new miniaturized solid-state radiation sensors: a CdZnTe detector for gamma radiation and a high efficiency neutron detector based on novel silicon technologies. The sensing unit will include a wireless communication interface to send the data remotely to a monitoring base station which also uses a GPS system to calculate the position of the tag. The system will also incorporate middleware and high level software to provide web-service interfaces for the exchange of information, and that will offer top level functionalities as management of users, mobile tags and environment data and alarms, database storage and management and a web-based graphical user interface. Effort will be spent to ensure that the software is modular and re-usable across as many architectural levels as possible. Finally, an expert system will continuously analyze the information from the radiation sensor and correlate it with historical data from the tag location in order to generate an alarm when an abnormal situation is detected. The system will be useful for many different scenarios, including such lost radioactive sources and radioactive contamination. It will be possible to deploy in emergency units and in general in any type of mobile or static equipment. The sensing units will be highly portable thanks to their low size and low energy consumption. The complete system will be scalable in terms of complexity and cost and will offer very high precision on both the measurement and the location of the radiation. The modularity and flexibility of the system will allow for a realistic introduction to the market. Authorities may start with a

  16. Real-time Forensic Disaster Analysis

    Science.gov (United States)

    Wenzel, F.; Daniell, J.; Khazai, B.; Mühr, B.; Kunz-Plapp, T.; Markus, M.; Vervaeck, A.

    2012-04-01

    The Center for Disaster Management and Risk Reduction Technology (CEDIM, www.cedim.de) - an interdisciplinary research center founded by the German Research Centre for Geoscience (GFZ) and Karlsruhe Institute of Technology (KIT) - has embarked on a new style of disaster research known as Forensic Disaster Analysis. The notion has been coined by the Integrated Research on Disaster Risk initiative (IRDR, www.irdrinternational.org) launched by ICSU in 2010. It has been defined as an approach to studying natural disasters that aims at uncovering the root causes of disasters through in-depth investigations that go beyond the reconnaissance reports and case studies typically conducted after disasters. In adopting this comprehensive understanding of disasters CEDIM adds a real-time component to the assessment and evaluation process. By comprehensive we mean that most if not all relevant aspects of disasters are considered and jointly analysed. This includes the impact (human, economy, and infrastructure), comparisons with recent historic events, social vulnerability, reconstruction and long-term impacts on livelihood issues. The forensic disaster analysis research mode is thus best characterized as "event-based research" through systematic investigation of critical issues arising after a disaster across various inter-related areas. The forensic approach requires (a) availability of global data bases regarding previous earthquake losses, socio-economic parameters, building stock information, etc.; (b) leveraging platforms such as the EERI clearing house, relief-web, and the many sources of local and international sources where information is organized; and (c) rapid access to critical information (e.g., crowd sourcing techniques) to improve our understanding of the complex dynamics of disasters. The main scientific questions being addressed are: What are critical factors that control loss of life, of infrastructure, and for economy? What are the critical interactions

  17. Instrumentation development for real time brainwave monitoring.

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Lawrence Frederick; Clough, Benjamin W.

    2005-12-01

    The human brain functions through a chemically-induced biological process which operates in a manner similar to electrical systems. The signal resulting from this biochemical process can actually be monitored and read using tools and having patterns similar to those found in electrical and electronics engineering. The primary signature of this electrical activity is the ''brain wave'', which looks remarkably similar to the output of many electrical systems. Likewise, the device currently used in medical arenas to read brain electrical activity is the electroencephalogram (EEG) which is synonymous with a multi-channel oscilloscope reading. Brain wave readings and recordings for medical purposes are traditionally taken in clinical settings such as hospitals, laboratories or diagnostic clinics. The signal is captured via externally applied scalp electrodes using semi-viscous gel to reduce impedance. The signal will be in the 10 to 100 microvolt range. In other instances, where surgeons are attempting to isolate particular types of minute brain signals, the electrodes may actually be temporarily implanted in the brain during a preliminary procedure. The current configurations of equipment required for EEGs involve large recording instruments, many electrodes, wires, and large amounts of hard disk space devoted to storing large files of brain wave data which are then eventually analyzed for patterns of concern. Advances in sensors, signal processing, data storage and microelectronics over the last decade would seem to have paved the way for the realization of devices capable of ''real time'' external monitoring, and possible assessment, of brain activity. A myriad of applications for such a capability are likewise presenting themselves, including the ability to assess brain functioning, level of functioning and malfunctioning. Our plan is to develop the sensors, signal processing, and portable instrumentation package which could

  18. Cyber security Considerations for Real Time Physiological Status Monitoring: Threats, Goals, and Use Cases

    Science.gov (United States)

    2016-11-01

    Cyber - security Considerations for Real-Time Physiological Status Monitoring: Threats, Goals, and Use Cases John Holliman, Michael Zhivich, Roger...Spins: Security protocols for sensor networks,” Secaucus, NJ, USA, pp. 521– 534, Sep. 2002. [8] DoD, Resilient Military Systems and the Advanced Cyber ...2012. [10] W. Trappe, R. Howard, and R. S. Moore, “Low-energy security : Limits and opportunities in the internet of things,” IEEE Security Privacy, vol

  19. Toward an improved distribution approach for real-time data sharing

    Science.gov (United States)

    Chayes, D. N.; Arko, R. A.; Roberts, S. D.

    2009-12-01

    Our shipboard data systems have been using UDP/IP broadcast datagrams for distributing real-time underway data starting on the R/V Conrad in 1987 and expanding to include the Ewing, Palmer, Gould, Healy and Langseth among others. This approach has many advantages including: ease of implementation; simplicity; and isolation of the clients from the real-time loggers. A number of other shipboard data systems have successfully adopted this approach. In the modern era of nearly full-time Internet connectivity for the research fleet, the ability to distribute near-real-time data to shore sites is expanding rapidly and should be done efficiently. For example, the NSF-supported Rolling Deck to Repository (R2R) and Shipboard Automated Meteorological and Oceanographic System (SAMOS) projects are jointly developing a new protocol to transfer high-frequency meteorological and surface oceanographic data from fleet vessels to a shore server for monitoring and quality control. At the same time, we are finding more sophisticated uses for real-time data at sea in addition to our own need to automate on-board real-time data quality checking. In order to facilitate these needs, we are developing a plan to migrate our data system to Multicast datagrams and add an open, standards-based discovery service so that clients connecting to our shipboard network can automatically find and use our data streams.

  20. A Web service-based architecture for real-time hydrologic sensor networks

    Science.gov (United States)

    Wong, B. P.; Zhao, Y.; Kerkez, B.

    2014-12-01

    Recent advances in web services and cloud computing provide new means by which to process and respond to real-time data. This is particularly true of platforms built for the Internet of Things (IoT). These enterprise-scale platforms have been designed to exploit the IP-connectivity of sensors and actuators, providing a robust means by which to route real-time data feeds and respond to events of interest. While powerful and scalable, these platforms have yet to be adopted by the hydrologic community, where the value of real-time data impacts both scientists and decision makers. We discuss the use of one such IoT platform for the purpose of large-scale hydrologic measurements, showing how rapid deployment and ease-of-use allows scientists to focus on their experiment rather than software development. The platform is hardware agnostic, requiring only IP-connectivity of field devices to capture, store, process, and visualize data in real-time. We demonstrate the benefits of real-time data through a real-world use case by showing how our architecture enables the remote control of sensor nodes, thereby permitting the nodes to adaptively change sampling strategies to capture major hydrologic events of interest.

  1. Securing Real-Time Sessions in an IMS-Based Architecture

    Science.gov (United States)

    Cennamo, Paolo; Fresa, Antonio; Longo, Maurizio; Postiglione, Fabio; Robustelli, Anton Luca; Toro, Francesco

    The emerging all-IP mobile network infrastructures based on 3rd Generation IP Multimedia Subsystem philosophy are characterised by radio access technology independence and ubiquitous connectivity for mobile users. Currently, great focus is being devoted to security issues since most of the security threats presently affecting the public Internet domain, and the upcoming ones as well, are going to be suffered by mobile users in the years to come. While a great deal of research activity, together with standardisation efforts and experimentations, is carried out on mechanisms for signalling protection, very few integrated frameworks for real-time multimedia data protection have been proposed in a context of IP Multimedia Subsystem, and even fewer experimental results based on testbeds are available. In this paper, after a general overview of the security issues arising in an advanced IP Multimedia Subsystem scenario, a comprehensive infrastructure for real-time multimedia data protection, based on the adoption of the Secure Real-Time Protocol, is proposed; then, the development of a testbed incorporating such functionalities, including mechanisms for key management and cryptographic context transfer, and allowing the setup of Secure Real-Time Protocol sessions is presented; finally, experimental results are provided together with quantitative assessments and comparisons of system performances for audio sessions with and without the adoption of the Secure Real-Time Protocol framework.

  2. Signaletic, haptic and real-time material

    Directory of Open Access Journals (Sweden)

    Bodil Marie Stavning Thomsen

    2012-06-01

    Full Text Available This introductory article to the following “cluster of articles” proposes to apply the term “signal” as a theoretical and analytical category for a new approach to the bearings of electronic and new media in particular. As the term “sign” was formerly developed from linguistics, the term signal was developed from Norbert Wiener's writings on mathematics and cybernetics. The electronic signal is a technological fact dating back to the telegraph that in a substantial way set the agenda for contemporary (popular culture (electronic music, youth, and performance culture and further facilitated the digital code and the Internet. In this article, as well as in the following articles, the term signal is above all applied in its broader sense to explore possible signaletic modes and characteristics in contemporary art and new media culture. It is thus a key point that technological implications could never be causal to aesthetic variations and cultural modes. Departing from this, this article explores artistic and cultural manifestations from the 1960s and onward in the light of the signal in order to analytically grasp the changes or supplements to the sign that in a contemporary culture is bringing new forms of events and affects to the fore.

  3. Wide Area Real Time Kinematic (WARTK): Usage of RTCM format, and real-time implementation

    OpenAIRE

    Valls Moreno, Angel

    2008-01-01

    Nowadays GNSS1 enhancement techniques have reached a relevant impor- tance and are present in a wide variety of applications. During the last years the Research Group of Astronomy and Geomatics (gAGE) from the Tech- nical University of Catalonia (UPC) has developed and tested new satellite navigation techniques which allow the extension of local services based on the real-time carrier phase ambiguity resolution2 to wide area scale (i.e., base- lines between the rover and reference stations gr...

  4. Real time UAV autonomy through offline calculations

    Science.gov (United States)

    Jung, Sunghun

    . Once one or several targets are detected, UAVs near the target are manipulated to approach to the target. If the number of detected targets is more than one, UAVs are evenly grouped to track targets. After a specific period of time, UAVs hand off and continue their original tasks. Thirdly, Emergency algorithm is generated to avoid losses of UAVs when UAVs have system failures. If one UAV is out of fuel or control during the mission, the Emergency algorithm brings the malfunctioning UAV to the point of departure and let the rest UAVs to continue an aerial reconnaissance. An UAV which finishes its task the earliest will continue to search a region which the failed UAV is supposed to search. In addition, Emergency algorithm prevents UAVs colliding into each other by using emergency altitude. Overall, the framework developed here facilitates the solution of several mission planning problems. The robustness built into our discretization of space and time permits feedback corrections on real-time to vehicle trajectories. The library of off-line solutions proposed and developed here minimizes computational overhead during operations.

  5. Real Time Flux Control in PM Motors

    Energy Technology Data Exchange (ETDEWEB)

    Otaduy, P.J.

    2005-09-27

    Significant research at the Oak Ridge National Laboratory (ORNL) Power Electronics and Electric Machinery Research Center (PEEMRC) is being conducted to develop ways to increase (1) torque, (2) speed range, and (3) efficiency of traction electric motors for hybrid electric vehicles (HEV) within existing current and voltage bounds. Current is limited by the inverter semiconductor devices' capability and voltage is limited by the stator wire insulation's ability to withstand the maximum back-electromotive force (emf), which occurs at the upper end of the speed range. One research track has been to explore ways to control the path and magnitude of magnetic flux while the motor is operating. The phrase, real time flux control (RTFC), refers to this mode of operation in which system parameters are changed while the motor is operating to improve its performance and speed range. RTFC has potential to meet an increased torque demand by introducing additional flux through the main air gap from an external source. It can augment the speed range by diverting flux away from the main air gap to reduce back-emf at high speeds. Conventional RTFC technology is known as vector control [1]. Vector control decomposes the stator current into two components; one that produces torque and a second that opposes (weakens) the magnetic field generated by the rotor, thereby requiring more overall stator current and reducing the efficiency. Efficiency can be improved by selecting a RTFC method that reduces the back-emf without increasing the average current. This favors methods that use pulse currents or very low currents to achieve field weakening. Foremost in ORNL's effort to develop flux control is the work of J. S. Hsu. Early research [2,3] introduced direct control of air-gap flux in permanent magnet (PM) machines and demonstrated it with a flux-controlled generator. The configuration eliminates the problem of demagnetization because it diverts all the flux from the

  6. RealTimeFrame – A Real Time Processing Framework for Medical Video Sequences

    Directory of Open Access Journals (Sweden)

    S. Gross

    2008-01-01

    Full Text Available Imaging technology is highly important in today’s medical environments. It provides information upon which the accuracy of the diagnosis and consequently the wellbeing of the patient rely. Increasing the quality and significance of medical image data is therefore one the aims of scientific research and development. We introduce an integrated hardware and software framework for real time image processing in medical environments, which we call RealTimeFrame. Our project is designed to offer flexibility, easy expandability and high performance. We use standard personal computer hardware to run our multithreaded software. A frame grabber card is used to capture video signals from medical imaging systems. A modular, user-defined process chain performs arbitrary manipulations on the image data. The graphical user interface offers configuration options and displays the processed image in either window or full screen mode. Image source and processing routines are encapsulated in dynamic library modules for easy functionality extension without recompilation of the entire software framework. Documented template modules for sources and processing steps are part of the software’s source code.

  7. A real-time transaction service for grid computing

    Institute of Scientific and Technical Information of China (English)

    Tang Feilong; Li Minglu; Joshua Huang Zhexue; Frank Tong; Cao Jian

    2005-01-01

    A real-time transaction service aims at ensuring the consistency of real-time and transactional Grid applications. This paper proposes an efficient real-time transaction service (RTTS). It provides abilities to discover qualified services, I.e., participants, to execute specified sub-transactions, coordinate real-time Grid transactions, calculate deadline and assign priority for scheduling concurrent transactions. The service discovery adopts the two-level registry mechanismto adapt to transient Grid services. The coordination algorithm invokes multiplefunctional alternative services for each sub-transaction so that it remarkablyimproves the successful ratio of real-time transactions. The experiment result shows that the RTTS can well coordinate real-time transactions for Grid service environment and shield users from the complex process.

  8. Sentiment analysis on students’ real-time feedback

    OpenAIRE

    Altrabsheh, Nabeela

    2016-01-01

    Previous literature identifies that students’ real-time feedback is important in the learning process. There are numerous studies that have collected students’ feedback in real time. However, they include several limitations of which the most important is analysing the feedback. In this thesis, we address these limitations by proposing a system that will automatically analyse students’ feedback in real time and present the analysis results to the lecturer. To create such a system, we propose ...

  9. Advanced real-time manipulation of video streams

    CERN Document Server

    Herling, Jan

    2014-01-01

    Diminished Reality is a new fascinating technology that removes real-world content from live video streams. This sensational live video manipulation actually removes real objects and generates a coherent video stream in real-time. Viewers cannot detect modified content. Existing approaches are restricted to moving objects and static or almost static cameras and do not allow real-time manipulation of video content. Jan Herling presents a new and innovative approach for real-time object removal with arbitrary camera movements.

  10. Real Time Synchronization for Creativity in Distributed Innovation Teams

    DEFF Research Database (Denmark)

    Peitersen, Dennis Kjaersgaard; Dolog, Peter; Pedersen, Esben Staunsbjerg

    2009-01-01

    In this paper we introduce a synchronization approach for real time collaborative sketching for creativity in distributed innovation teams. We base our approach on reverse AJAX. This way we ensure scalable solution for real time drawing and sketching important in creativity settings.......In this paper we introduce a synchronization approach for real time collaborative sketching for creativity in distributed innovation teams. We base our approach on reverse AJAX. This way we ensure scalable solution for real time drawing and sketching important in creativity settings....

  11. Real Time Synchronization for Creativity in Distributed Innovation Teams

    DEFF Research Database (Denmark)

    Peitersen, Dennis Kjaersgaard; Dolog, Peter; Pedersen, Esben Staunsbjerg

    2009-01-01

    In this paper we introduce a synchronization approach for real time collaborative sketching for creativity in distributed innovation teams. We base our approach on reverse AJAX. This way we ensure scalable solution for real time drawing and sketching important in creativity settings.......In this paper we introduce a synchronization approach for real time collaborative sketching for creativity in distributed innovation teams. We base our approach on reverse AJAX. This way we ensure scalable solution for real time drawing and sketching important in creativity settings....

  12. Building Real-Time Collaborative Applications with a Federated Architecture

    Directory of Open Access Journals (Sweden)

    Pablo Ojanguren-Menendez

    2015-12-01

    Full Text Available Real-time collaboration is being offered by multiple libraries and APIs (Google Drive Real-time API, Microsoft Real-Time Communications API, TogetherJS, ShareJS, rapidly becoming a mainstream option for webservices developers. However, they are offered as centralised services running in a single server, regardless if they are free/open source or proprietary software. After re-engineering Apache Wave (former Google Wave, we can now provide the first decentralised and federated free/open source alternative. The new API allows to develop new real-time collaborative web applications in both JavaScript and Java environments.

  13. Verifying real-time systems against scenario-based requirements

    DEFF Research Database (Denmark)

    Larsen, Kim Guldstrand; Li, Shuhao; Nielsen, Brian;

    2009-01-01

    subset of the LSC language. By equivalently translating an LSC chart into an observer TA and then non-intrusively composing this observer with the original system model, the problem of verifying a real-time system against a scenario-based requirement reduces to a classical real-time model checking......We propose an approach to automatic verification of real-time systems against scenario-based requirements. A real-time system is modeled as a network of Timed Automata (TA), and a scenario-based requirement is specified as a Live Sequence Chart (LSC). We define a trace-based semantics for a kernel...

  14. Unified Modeling of Complex Real-Time Control Systems

    CERN Document Server

    Hai, He; Chi-Lan, Cai

    2011-01-01

    Complex real-time control system is a software dense and algorithms dense system, which needs modern software engineering techniques to design. UML is an object-oriented industrial standard modeling language, used more and more in real-time domain. This paper first analyses the advantages and problems of using UML for real-time control systems design. Then, it proposes an extension of UML-RT to support time-continuous subsystems modeling. So we can unify modeling of complex real-time control systems on UML-RT platform, from requirement analysis, model design, simulation, until generation code.

  15. Real time imaging of human progenitor neurogenesis.

    Directory of Open Access Journals (Sweden)

    Thomas M Keenan

    Full Text Available Human neural progenitors are increasingly being employed in drug screens and emerging cell therapies targeted towards neurological disorders where neurogenesis is thought to play a key role including developmental disorders, Alzheimer's disease, and depression. Key to the success of these applications is understanding the mechanisms by which neurons arise. Our understanding of development can provide some guidance but since little is known about the specifics of human neural development and the requirement that cultures be expanded in vitro prior to use, it is unclear whether neural progenitors obey the same developmental mechanisms that exist in vivo. In previous studies we have shown that progenitors derived from fetal cortex can be cultured for many weeks in vitro as undifferentiated neurospheres and then induced to undergo neurogenesis by removing mitogens and exposing them to supportive substrates. Here we use live time lapse imaging and immunocytochemical analysis to show that neural progenitors use developmental mechanisms to generate neurons. Cells with morphologies and marker profiles consistent with radial glia and recently described outer radial glia divide asymmetrically and symmetrically to generate multipolar intermediate progenitors, a portion of which express ASCL1. These multipolar intermediate progenitors subsequently divide symmetrically to produce CTIP2(+ neurons. This 3-cell neurogenic scheme echoes observations in rodents in vivo and in human fetal slice cultures in vitro, providing evidence that hNPCs represent a renewable and robust in vitro assay system to explore mechanisms of human neurogenesis without the continual need for fresh primary human fetal tissue. Knowledge provided by this and future explorations of human neural progenitor neurogenesis will help maximize the safety and efficacy of new stem cell therapies by providing an understanding of how to generate physiologically-relevant cell types that maintain their

  16. Promotion and marketing of bioidentical hormone therapy on the internet: a content analysis of websites.

    Science.gov (United States)

    Yuksel, Nese; Treseng, Laetitia; Malik, Bushra; Ogbogu, Ubaka

    2017-10-01

    To evaluate the quality of information presented and claims made on websites offering bioidentical hormone therapy (BHT) products or services. A quantitative content analysis was completed on 100 websites promoting or offering BHT products or services. Websites were identified through Google search engine from September to October 2013. Search terms included "bioidentical hormone therapy" or "bioidentical progesterone," accompanied by "purchase or buy," "service," or "doctors." The Brief DISCERN instrument was used to determine the quality of the health information. Websites were from Canada (59%), United States (38%), and other countries (3%). Almost half of the websites originated from medical clinics (47%), and healthcare professionals offering BHT services included physicians (50%), pharmacists (19%), and naturopaths (16%). Majority of websites promoted BHT as custom-compounded formulations (62%), with only 27% indicating that BHT is also commercially available. Websites overall claimed that BHT had less risk compared with conventional hormone therapy (62%). BHT was described as having less breast cancer risk (40%), whereas over a quarter of websites described BHT as "protective" for breast cancer. Websites mainly targeted women (99%), with males mentioned in 62% of websites. Product descriptors used to promote BHT included individualization (77%), natural (70%), hormone imbalance (56%), and antiaging (50%). The mean Brief DISCERN score was 15, indicating lower quality of information. Claims made about BHT on the internet are misleading and not consistent with current professional organizations' recommendations. Understanding how BHT may be promoted on the internet can help healthcare professionals when educating patients.

  17. Real-Time Dosimetry and Optimization of Prostate Photodynamic Therapy

    Science.gov (United States)

    2006-09-01

    bound on dose is provided for every voxel. The goal is to find the vector x of source strengths that satisfies the in- equality constraints of...current estimate x of the unknown optimal result xopt. Rays are directed from x perpendicularly toward each violated hyperplane, and a resultant vector ...Analisi Matematica , Dipartimento di Matem- atica dell ’Universita’ di Bologna, Volune speciale: Ciclo di conferenze in ricordo di Gianfranco Cimmino, Marzo

  18. Real-Time Dosimetry and Optimization of Prostate Photodynamic Therapy

    Science.gov (United States)

    2005-05-01

    J R, Freyer J P, Hielscher A H, Eick A A, Shen D and Johnson T M 1998 Mechanisms of light scattering from biological cells relevant to noninvasive...consuming job that requires contours from ultrasonic tomographic images, visualization of 3D volumes (prostate, urethra, and rectum) and their intersections

  19. A Near Real-time IP Traffic Classification Using Machine Learning

    Directory of Open Access Journals (Sweden)

    Kuldeep Singh

    2013-02-01

    Full Text Available With drastic increase in internet traffic over last few years due to increase in number of internet users, IP traffic classification has gained significant importance for research community as well as various internet service providers for optimization of their network performance and for governmental intelligence organizations. Today, traditional IP traffic classification techniques such as port number and payload based direct packet inspection techniques are rarely used because of use of dynamic port number instead of well-known port number in packet headers and various cryptographic techniques which inhibit inspection of packet payload. Current trends are use of machine learning (ML techniques for IP traffic classification. In this research paper, a real time internet traffic dataset has been developed using packet capturing tool for 2 second packet capturing duration and other datasets have been developed by reducing number of features of 2 second duration dataset using Correlation and Consistency based Feature Selection (FS Algorithms. Then, five ML algorithms MLP, RBF, C4.5, Bayes Net and Naïve Bayes are employed for IP traffic classification with these datasets. This experimental analysis shows that Bayes Net is an effective ML technique for near real time and online IP traffic classification with reduction in packet capture duration and reduction in number of features characterizing each application sample with Correlation based FS Algorithm.

  20. Real-time services in IP network architectures

    Science.gov (United States)

    Gilardi, Antonella

    1996-12-01

    The worldwide internet system seems to be the success key for the provision of real time multimedia services to both residential and business users and someone says that in such a way broadband networks will have a reason to exist. This new class of applications that use multiple media (voice, video and data) impose constraints to the global network nowadays consisting of subnets with various data links. The attention will be focused on the interconnection of IP non ATM and ATM networks. IETF and ATM forum are currently involved in the developing specifications suited to adapt the connectionless IP protocol to the connection oriented ATM protocol. First of all the link between the ATM and the IP service model has to be set in order to match the QoS and traffic requirements defined in the relative environment. A further significant topic is represented by the mapping of IP resource reservation model onto the ATM signalling and in the end it is necessary to define how the routing works when there are QoS parameters associated. This paper, considering only unicast applications, will examine the above issues taking as a starting point the situation where an host launches as call set up request with the relevant QoS and traffic descriptor and at some point a router at the edge of the ATM network has to decide how forwarding and request in order to establish an end to end link with the right capabilities. The aim is to compare the proposals emerging from different standard bodies to point out convergency or incompatibility.

  1. Real-time three-dimensional flexible needle tracking using two-dimensional ultrasound

    NARCIS (Netherlands)

    Vrooijink, G.J.; Abayazid, Momen; Misra, Sarthak

    2013-01-01

    Needle insertion is one of the most commonly performed minimally invasive procedures. Visualization of the needle during insertion is key for either successful diagnosis or therapy. This work presents the real-time three-dimensional tracking of flexible needles during insertion into a soft-tissue

  2. Acceptance as a mediator in internet-delivered acceptance and commitment therapy and cognitive behavior therapy for tinnitus.

    Science.gov (United States)

    Hesser, Hugo; Westin, Vendela Zetterqvist; Andersson, Gerhard

    2014-08-01

    Despite demonstrated efficacy of behavioral and cognitive techniques in treating the impact of tinnitus (constant ringing in the ears), little is known about the mechanisms by which these techniques achieve their effect. The present study examined acceptance of tinnitus as a potential mediator of treatment changes on global tinnitus severity in internet-delivered acceptance and commitment therapy (iACT) and internet-delivered cognitive behavior therapy (iCBT). Data from 67 participants who were distressed by tinnitus and who were randomly assigned to 1 of the 2 treatments were analyzed using a multilevel moderated mediation model. We predicted that acceptance as measured with the two subscales of the tinnitus acceptance questionnaire (i.e., activity engagement and tinnitus suppression) would mediate the outcome in iACT, but not in iCBT. Results provided partial support to the notion that mediation was moderated by treatment: tinnitus suppression mediated changes in tinnitus severity in iACT, but not in iCBT. However, inconsistent with the view that the treatments worked through different processes of change, activity engagement mediated treatment changes across both iACT and iCBT. Acceptance is identified as a key source of therapeutic change in behavioral-based treatments for tinnitus.

  3. Efficacy of cognitive behavioural therapy delivered over the Internet for depressive symptoms: A systematic review and meta-analysis.

    Science.gov (United States)

    Sztein, Dina M; Koransky, Charles E; Fegan, Leah; Himelhoch, Seth

    2017-01-01

    Introduction Cognitive behavioural therapy has been shown to improve depressive symptoms in adults with mild to moderate depression. To overcome many of the barriers associated with delivering this treatment, attempts have been made to deliver cognitive behavioural therapy via the Internet. The objective of this meta-analysis is to assess whether Internet-based cognitive behavioural therapy delivered to adults with depressive symptoms leads to a reduction in these symptoms as compared to those who receive no therapy. Methods In September 2015, the Cochrane, PubMed and PsycInfo databases were searched; studies were also found through bibliography searches. Studies were included if they were randomized controlled trials published in English between 2005-2015 conducted with adults >18 years of age experiencing mild to moderate depression where study subjects received Internet-based cognitive behavioural therapy, and the control group was placed on a wait-list. The search yielded 257 articles; 14 of these were included in the meta-analysis. Results Internet delivered cognitive behavioural therapy had a medium effect on reducing depressive symptoms at the end of the study period (standardized mean difference: 0.74, confidence interval: 0.62-0.86, p cognitive behavioural therapy also has a large sustained effect in maintaining reduction of depressive symptoms in follow-up measures done 3-6 months after the conclusion of the therapy (standardized mean difference: 0.83, confidence interval: 0.69-0.99, p Cognitive behavioural therapy delivered over the Internet leads to immediate and sustained reduction in depressive symptoms; thus, it may be a good treatment modality for individuals unable or unwilling to access traditional face-to-face therapy.

  4. A Randomized Controlled Trial of Internet-Delivered Cognitive Behavior Therapy and Acceptance and Commitment Therapy in the Treatment of Tinnitus

    Science.gov (United States)

    Hesser, Hugo; Gustafsson, Tore; Lunden, Charlotte; Henrikson, Oskar; Fattahi, Kidjan; Johnsson, Erik; Westin, Vendela Zetterqvist; Carlbring, Per; Maki-Torkko, Elina; Kaldo, Viktor; Andersson, Gerhard

    2012-01-01

    Objective: Our aim in this randomized controlled trial was to investigate the effects on global tinnitus severity of 2 Internet-delivered psychological treatments, acceptance and commitment therapy (ACT) and cognitive behavior therapy (CBT), in guided self-help format. Method: Ninety-nine participants (mean age = 48.5 years; 43% female) who were…

  5. A Randomized Controlled Trial of Internet-Delivered Cognitive Behavior Therapy and Acceptance and Commitment Therapy in the Treatment of Tinnitus

    Science.gov (United States)

    Hesser, Hugo; Gustafsson, Tore; Lunden, Charlotte; Henrikson, Oskar; Fattahi, Kidjan; Johnsson, Erik; Westin, Vendela Zetterqvist; Carlbring, Per; Maki-Torkko, Elina; Kaldo, Viktor; Andersson, Gerhard

    2012-01-01

    Objective: Our aim in this randomized controlled trial was to investigate the effects on global tinnitus severity of 2 Internet-delivered psychological treatments, acceptance and commitment therapy (ACT) and cognitive behavior therapy (CBT), in guided self-help format. Method: Ninety-nine participants (mean age = 48.5 years; 43% female) who were…

  6. Engaging Middle School Students with Technology: Using Real-Time Data to Test Predictions in Aquatic Ecosystems

    Science.gov (United States)

    Adams, Lisa G.

    2011-01-01

    Take advantage of teen internet savvy and redirect students' online travels toward exploration of our environment through streaming real-time data (RTD). Studies have shown that using RTD adds relevancy to students' learning experiences and engages them in scientific investigations. (Contains 14 online resources and 5 figures.)

  7. 76 FR 42536 - Real-Time System Management Information Program

    Science.gov (United States)

    2011-07-19

    ... Federal Highway Administration 23 CFR Part 511 RIN 2125-AF19 Real-Time System Management Information... additional comments relating to the costs and benefits of the Real-Time System Management Information Program... System Management Information Program on November 8, 2010, at 75 FR 68418. The final rule document...

  8. 75 FR 68418 - Real-Time System Management Information Program

    Science.gov (United States)

    2010-11-08

    ... Federal Highway Administration 23 CFR Part 511 RIN 2125-AF19 Real-Time System Management Information... System Management Information Program that provides, in all States, the capability to monitor, in real... traveler information. The purposes of the Real-Time System Management Information Program are to:...

  9. Real-Time PCR for Universal Phytoplasma Detection and Quantification

    DEFF Research Database (Denmark)

    Christensen, Nynne Meyn; Nyskjold, Henriette; Nicolaisen, Mogens

    2013-01-01

    Currently, the most efficient detection and precise quantification of phytoplasmas is by real-time PCR. Compared to nested PCR, this method is less sensitive to contamination and is less work intensive. Therefore, a universal real-time PCR method will be valuable in screening programs and in other...

  10. Real-Time Adaptation of Influence Strategies in Online Selling

    NARCIS (Netherlands)

    Kaptein, M.C.; Parvinen, P.

    2014-01-01

    Real-time adjustments in online selling are becoming increasingly common. In this paper we describe a novel method of real-time adaptation, and introduce influence strategies as a useful level of analysis for personalization of online selling. The proposed method incorporates three perspectives on r

  11. "Real-Time" Case Studies in Organizational Communication

    Science.gov (United States)

    Long, Shawn D.

    2005-01-01

    This article presents an activity that integrates theory and application by examining the multiple communication events affecting a single organization in "real time" over the course of an academic term. The "real-time" case study (RTCS) avails students of the opportunity to examine organizational communication events as they are occurring in…

  12. RT-PLG: Real Time Process Log Generator

    DEFF Research Database (Denmark)

    Yahya, Bernardo Nugroho; Khosiawan, Yohanes; Choi, Woosik;

    2016-01-01

    . This paper aims to develop a real time process log generator for the usage of streaming process mining tool. The real time process log generator (RT-PLG) is constructed in an independent tool. Afterward, the RT-PLG is utilized to generate a synthetic log for streaming process mining. The tool has been...... evaluated using an existing simulation model....

  13. A Real-time Data Model Based on Temporal Data

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xiao-fang; LIU Yun-sheng

    2006-01-01

    Real-time database systems contain not only transaction timing constraints, but also data timing constraints. This paper discusses the temporal characteristics of data in real-time databases and offers a definition of absolute and relative temporal consistency. In real-time database systems, it is often the case that the policies of transaction schedules only consider the deadline of real-time transactions, making it insufficient to ensure temporal correctness of transactions. A policy is given by considering both the deadlines of transactions and the "data deadline" to schedule real-time transactions. A real-time relational data model and a real-time relational algebra based on the characteristics of temporal data are also proposed. In this model, the temporal data has not only corresponding values, but also validity intervals corresponding to the data values. At the same time, this model is able to keep historical data values. When validity interval of a relation is[NOW,NOW], real-time relational algebra will transform to traditional relational algebra.

  14. Quantitation of viral load using real-time amplification techniques

    NARCIS (Netherlands)

    Niesters, H G

    2001-01-01

    Real-time PCR amplification techniques are currently used to determine the viral load in clinical samples for an increasing number of targets. Real-time PCR reduces the time necessary to generate results after amplification. In-house developed PCR and nucleic acid sequence-based amplification (NASBA

  15. Intelligent, Real-Time Problem Solving. Phase 3

    Science.gov (United States)

    1992-04-30

    approach, and to develop a heuristic algorithm for design-to-time real-time scheduling. E .velopes. During Phase III we extended our work on the real...the anytime algorithm approach, and presents a heuristic algorithm for design-to-time real-time scheduling. The methodology is known as design-to

  16. Distributed, Embedded and Real-time Java Systems

    CERN Document Server

    Wellings, Andy

    2012-01-01

    Research on real-time Java technology has been prolific over the past decade, leading to a large number of corresponding hardware and software solutions, and frameworks for distributed and embedded real-time Java systems.  This book is aimed primarily at researchers in real-time embedded systems, particularly those who wish to understand the current state of the art in using Java in this domain.  Much of the work in real-time distributed, embedded and real-time Java has focused on the Real-time Specification for Java (RTSJ) as the underlying base technology, and consequently many of the Chapters in this book address issues with, or solve problems using, this framework. Describes innovative techniques in: scheduling, memory management, quality of service and communication systems supporting real-time Java applications; Includes coverage of multiprocessor embedded systems and parallel programming; Discusses state-of-the-art resource management for embedded systems, including Java’s real-time garbage collect...

  17. Real time ray tracing of skeletal implicit surfaces

    DEFF Research Database (Denmark)

    Rouiller, Olivier; Bærentzen, Jakob Andreas

    Modeling and rendering in real time is usually done via rasterization of polygonal meshes. We present a method to model with skeletal implicit surfaces and an algorithm to ray trace these surfaces in real time in the GPU. Our skeletal representation of the surfaces allows to create smooth models...

  18. Operational and logical semantics for polling real-time systems

    NARCIS (Netherlands)

    Anders, P.R.; Dierks, Henning; Fehnker, Ansgar; Rischel, H.; Fehnker, Ansgar; Mader, Angelika H.; Vaandrager, Frits

    PLC-Automata are a class of real-time automata suitable to describe the behavior of polling real-time systems. PLC-Automata can be compiled to source code for PLCs, a hardware widely used in industry to control processes. Also, PLC-Automata have been equipped with a logical and operational

  19. Survey of real-time processing systems for big data

    DEFF Research Database (Denmark)

    Liu, Xiufeng; Lftikhar, Nadeem; Xie, Xike

    2014-01-01

    In recent years, real-time processing and analytics systems for big data–in the context of Business Intelligence (BI)–have received a growing attention. The traditional BI platforms that perform regular updates on daily, weekly or monthly basis are no longer adequate to satisfy the fast......-changing business environments. However, due to the nature of big data, it has become a challenge to achieve the real-time capability using the traditional technologies. The recent distributed computing technology, MapReduce, provides off-the-shelf high scalability that can significantly shorten the processing time...... for big data; Its open-source implementation such as Hadoop has become the de-facto standard for processing big data, however, Hadoop has the limitation of supporting real-time updates. The improvements in Hadoop for the real-time capability, and the other alternative real-time frameworks have been...

  20. Real-time feedback from iterative electronic structure calculations

    CERN Document Server

    Vaucher, Alain C; Reiher, Markus

    2015-01-01

    Real-time feedback from iterative electronic structure calculations requires to mediate between the inherently unpredictable execution times of the iterative algorithm employed and the necessity to provide data in fixed and short time intervals for real-time rendering. We introduce the concept of a mediator as a component able to deal with infrequent and unpredictable reference data to generate reliable feedback. In the context of real-time quantum chemistry, the mediator takes the form of a surrogate potential that has the same local shape as the first-principles potential and can be evaluated efficiently to deliver atomic forces as real-time feedback. The surrogate potential is updated continuously by electronic structure calculations and guarantees to provide a reliable response to the operator for any molecular structure. To demonstrate the application of iterative electronic structure methods in real-time reactivity exploration, we implement self-consistent semi-empirical methods as the data source and a...

  1. Self-Organization in Embedded Real-Time Systems

    CERN Document Server

    Brinkschulte, Uwe; Rettberg, Achim

    2013-01-01

    This book describes the emerging field of self-organizing, multicore, distributed and real-time embedded systems.  Self-organization of both hardware and software can be a key technique to handle the growing complexity of modern computing systems. Distributed systems running hundreds of tasks on dozens of processors, each equipped with multiple cores, requires self-organization principles to ensure efficient and reliable operation. This book addresses various, so-called Self-X features such as self-configuration, self-optimization, self-adaptation, self-healing and self-protection. Presents open components for embedded real-time adaptive and self-organizing applications; Describes innovative techniques in: scheduling, memory management, quality of service, communications supporting organic real-time applications; Covers multi-/many-core embedded systems supporting real-time adaptive systems and power-aware, adaptive hardware and software systems; Includes case studies of open embedded real-time self-organizi...

  2. Academic Training: Real Time Process Control - Lecture series

    CERN Multimedia

    Françoise Benz

    2004-01-01

    ACADEMIC TRAINING LECTURE REGULAR PROGRAMME 7, 8 and 9 June From 11:00 hrs to 12:00 hrs - Main Auditorium bldg. 500 Real Time Process Control T. Riesco / CERN-TS What exactly is meant by Real-time? There are several definitions of real-time, most of them contradictory. Unfortunately the topic is controversial, and there does not seem to be 100% agreement over the terminology. Real-time applications are becoming increasingly important in our daily lives and can be found in diverse environments such as the automatic braking system on an automobile, a lottery ticket system, or robotic environmental samplers on a space station. These lectures will introduce concepts and theory like basic concepts timing constraints, task scheduling, periodic server mechanisms, hard and soft real-time.ENSEIGNEMENT ACADEMIQUE ACADEMIC TRAINING Françoise Benz 73127 academic.training@cern.ch

  3. Survey of real-time processing systems for big data

    DEFF Research Database (Denmark)

    Iftikhar, Nadeem

    2014-01-01

    In recent years, real-time processing and analytics systems for big data–in the context of Business Intelligence (BI)–have received a growing attention. The traditional BI platforms that perform regular updates on daily, weekly or monthly basis are no longer adequate to satisfy the fast......-changing business environments. However, due to the nature of big data, it has become a challenge to achieve the real-time capability using the traditional technologies. The recent distributed computing technology, MapReduce, provides off-the-shelf high scalability that can significantly shorten the processing time...... for big data; Its open-source implementation such as Hadoop has become the de-facto standard for processing big data, however, Hadoop has the limitation of supporting real-time updates. The improvements in Hadoop for the real-time capability, and the other alternative real-time frameworks have been...

  4. Experiences of undergoing Internet-based cognitive behavior therapy for procrastination: A qualitative study

    Directory of Open Access Journals (Sweden)

    Alexander Rozental

    2015-09-01

    Full Text Available Internet interventions constitute a promising and cost-effective treatment alternative for a wide range of psychiatric disorders and somatic conditions. Several clinical trials have provided evidence for its efficacy and effectiveness, and recent research also indicate that it can be helpful in the treatment of conditions that are debilitating, but do not necessarily warrant more immediate care, for instance, procrastination, a self-regulatory failure that is associated with decreased well-being and mental health. However, providing treatment interventions for procrastination via the Internet is a novel approach, making it unclear how the participants themselves perceive their experiences. The current study thus investigated participants' own apprehension of undergoing Internet-based cognitive behavior therapy for procrastination by distributing open-ended questions at the post-treatment assessment, for instance, “What did you think about the readability of the texts”, “How valuable do you believe that this treatment has been for you?”, and “The thing that I am most displeased with (and how it could be improved is …”. In total, 75 participants (50% responded, and the material was examined using thematic analysis. The results indicate that there exist both positive and negative aspects of the treatment program. Many participants increased their self-efficacy and were able to gain momentum on many tasks and assignments that had been deferred in their everyday life. Meanwhile, several participants lacked motivation to complete the exercises, had too many conflicting commitments, and were unable to keep up with the tight treatment schedule. Hence, the results suggest that Internet interventions for procrastination could profit from individual tailoring, shorter and more manageable modules, and that the content need to be adapted to the reading comprehension and motivational level of the participant.

  5. 4g-Based Specialty Vehicles Real-Time Monitoring System Design and Implementation

    Directory of Open Access Journals (Sweden)

    Zhuang Yu-Feng

    2017-01-01

    Full Text Available In the future development of natural gas transportation industry, emerging ITS technology will be applied more and more, aiming at integrating precise positioning technology, geographic information system technology, database technology, multimedia technology and modern communication technology, sensor network technology and video capture technology, so as to achieve the transport steam (oil vehicles in real time monitoring and management. The main research content of this paper is to design and research the monitoring and locating system of luck (oil vehicle based on 4G on Android System. Real-time monitoring and alarming by sensor module, real-time video recording and uploading through camera module, real-time position recording and uploading through GPS module, vehicle navigation module and quick alarm module, which is composed of five parts. The system is the application of new intelligent transport technology in the field of special vehicle transport. It apply electronic information technology and internet of things technology to the vehicle system, so we can monitor natural gas and other special dangerous goods anytime, anywhere.

  6. Internet-delivered cognitive behavior therapy for anxiety disorders is here to stay.

    Science.gov (United States)

    Andrews, Gavin; Newby, Jill M; Williams, Alishia D

    2015-01-01

    Anxiety disorders are common and disabling. Cognitive behavior therapy is the treatment of choice but is often difficult to obtain. Automated, internet-delivered, cognitive behavior therapy (iCBT) courses may be an answer. There are three recent systematic reviews of randomized controlled trials that show that the benefits are substantial (d = 1.0) and similar to face to face CBT. There are two large effectiveness trials that demonstrate strong effects when iCBT is used in primary care; 60 % of patients who complete the courses no longer meet diagnostic criteria. The courses are suitable for most people with a primary anxiety disorder. Research studies usually exclude people whose anxiety is secondary to schizophrenia, bipolar disorder, or substance abuse or who are actively suicidal. Little additional input from clinicians is required. Patients find the courses very convenient. Clinically, the principal advantage is the fidelity of the treatment. What you prescribe is what the patient sees.

  7. In vivo real-time cavitation imaging in moving organs

    Science.gov (United States)

    Arnal, B.; Baranger, J.; Demene, C.; Tanter, M.; Pernot, M.

    2017-02-01

    The stochastic nature of cavitation implies visualization of the cavitation cloud in real-time and in a discriminative manner for the safe use of focused ultrasound therapy. This visualization is sometimes possible with standard echography, but it strongly depends on the quality of the scanner, and is hindered by difficulty in discriminating from highly reflecting tissue signals in different organs. A specific approach would then permit clear validation of the cavitation position and activity. Detecting signals from a specific source with high sensitivity is a major problem in ultrasound imaging. Based on plane or diverging wave sonications, ultrafast ultrasonic imaging dramatically increases temporal resolution, and the larger amount of acquired data permits increased sensitivity in Doppler imaging. Here, we investigate a spatiotemporal singular value decomposition of ultrafast radiofrequency data to discriminate bubble clouds from tissue based on their different spatiotemporal motion and echogenicity during histotripsy. We introduce an automation to determine the parameters of this filtering. This method clearly outperforms standard temporal filtering techniques with a bubble to tissue contrast of at least 20 dB in vitro in a moving phantom and in vivo in porcine liver.

  8. Scheduling Non-stationary Bursts of Real-time and Non-real-time Traffic in ATM Networks

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The problem of scheduling real-time and non-real-time traffic in an ATM switch multiplexor when bursts of either type of traffic occur is studied. The scheduling algorithms studied are: Queue Length Threshold (QLT) and Minimum Laxity Threshold (MLT). Analytic results based on Markov Chains are used. In addition the results are compared with an optimal (but impractical) scheduling determined via dynamic programming. Dynamic programming is used in this paper to show that MLT gives a near optimal performance trade-off between real-time and non-real-time traffic for constant arrival rates. The trade-off QLT allows is not close to optimal. For non-real-time bursts MLT still gives a close to optimal trade-off. For real-time bursts the trade-off MLT allows between real-time and non-real-time traffic is not as close to optimal, but even where the MLT trade-off is not near optimal, the QLT trade-off is much worse than the MLT trade-off.

  9. Real-time Precise Point Positioning with Ambiguity Resolution for Geosciences

    Science.gov (United States)

    Geng, J.; Meng, X.; Teferle, F. N.; Dodson, A. H.; Ge, M.; Shi, C.; Liu, J.

    2009-04-01

    Real-time provision of information on large scale crustal deformation during an earthquake can be crucial in assessing property damage and managing relief operations. Moreover, such a real-time monitoring system may even lead to the accurate prediction of earthquakes in future and help the subsequent studies on the mechanism involved. During the past two decades, Global Positioning System (GPS) measurements have been extensively applied to investigate such processes in the geosciences. Precise point positioning (PPP) using GPS based on single stations can achieve comparable accuracies to conventional relative positioning, when precise satellite orbits and clocks, and Earth rotation products are used. Thus, PPP does not need any reference stations to achieve high positioning accuracy, e.g. at the millimetre level in static and centimetre level in kinematic applications. This has both technical and economic advantages and may be the only feasible option in some specific applications such as Tsunami early warning systems. However, unlike relative positioning, PPP suffers from unresolved integer ambiguities, which prevented further accuracy improvements within short observation periods or in real-time. On account of the great potential of PPP, we developed a prototype real-time PPP system which also employs ambiguity resolution at a single station. This development is based on the PANDA (Positioning And Navigation Data Analyst) software, which was originally developed at Wuhan University in China, and has been significantly refined by the authors. To assess this system, about 30 stations from the EUREF Permanent Network Internet Protocol (EUREF-IP) pilot project are used to produce the real-time satellite clocks, with satellite orbits and Earth rotation parameters (ERP) fixed to the predicted part of the IGS (International GNSS Service) ultra-rapid products. This is followed by the estimation of the uncalibrated hardware delays (UHD), which are crucial in resolving the

  10. Timing System Solution for MedAustron; Real-time Event and Data Distribution Network

    CERN Document Server

    Štefanič, R; Dedič, J; Gutleber, J; Moser, R

    2011-01-01

    MedAustron is an ion beam research and therapy centre under construction in Wiener Neustadt, Austria. The facility features a synchrotron particle accelerator for light ions. The timing system for this class of accelerators has been developed in close collaboration between MedAustron and Cosylab. Mitigating economical and technological risks, we have chosen a proven, widely used Micro Research Finland (MRF) timing equipment and redesigned its FPGA firmware, extending its high-logic services above transport layer, as required by machine specifics. We obtained a generic real-time broadcast network for coordinating actions of a compact, pulse-to-pulse modulation based particle accelerator. High-level services include support for virtual accelerators and a rich selection of event response mechanisms. The system uses a combination of a real-time link for downstream events and a non-real-time link for upstream messaging and non time-critical communication. It comes with National Instruments LabVI...

  11. A low cost real-time motion tracking approach using webcam technology.

    Science.gov (United States)

    Krishnan, Chandramouli; Washabaugh, Edward P; Seetharaman, Yogesh

    2015-02-01

    Physical therapy is an important component of gait recovery for individuals with locomotor dysfunction. There is a growing body of evidence that suggests that incorporating a motor learning task through visual feedback of movement trajectory is a useful approach to facilitate therapeutic outcomes. Visual feedback is typically provided by recording the subject's limb movement patterns using a three-dimensional motion capture system and displaying it in real-time using customized software. However, this approach can seldom be used in the clinic because of the technical expertise required to operate this device and the cost involved in procuring a three-dimensional motion capture system. In this paper, we describe a low cost two-dimensional real-time motion tracking approach using a simple webcam and an image processing algorithm in LabVIEW Vision Assistant. We also evaluated the accuracy of this approach using a high precision robotic device (Lokomat) across various walking speeds. Further, the reliability and feasibility of real-time motion-tracking were evaluated in healthy human participants. The results indicated that the measurements from the webcam tracking approach were reliable and accurate. Experiments on human subjects also showed that participants could utilize the real-time kinematic feedback generated from this device to successfully perform a motor learning task while walking on a treadmill. These findings suggest that the webcam motion tracking approach is a feasible low cost solution to perform real-time movement analysis and training.

  12. Reviewing real-time performance of nuclear reactor safety systems

    Energy Technology Data Exchange (ETDEWEB)

    Preckshot, G.G. [Lawrence Livermore National Lab., CA (United States)

    1993-08-01

    The purpose of this paper is to recommend regulatory guidance for reviewers examining real-time performance of computer-based safety systems used in nuclear power plants. Three areas of guidance are covered in this report. The first area covers how to determine if, when, and what prototypes should be required of developers to make a convincing demonstration that specific problems have been solved or that performance goals have been met. The second area has recommendations for timing analyses that will prove that the real-time system will meet its safety-imposed deadlines. The third area has description of means for assessing expected or actual real-time performance before, during, and after development is completed. To ensure that the delivered real-time software product meets performance goals, the paper recommends certain types of code-execution and communications scheduling. Technical background is provided in the appendix on methods of timing analysis, scheduling real-time computations, prototyping, real-time software development approaches, modeling and measurement, and real-time operating systems.

  13. Space Shuttle Main Engine real time stability analysis

    Science.gov (United States)

    Kuo, F. Y.

    1993-01-01

    The Space Shuttle Main Engine (SSME) is a reusable, high performance, liquid rocket engine with variable thrust. The engine control system continuously monitors the engine parameters and issues propellant valve control signals in accordance with the thrust and mixture ratio commands. A real time engine simulation lab was installed at MSFC to verify flight software and to perform engine dynamic analysis. A real time engine model was developed on the AD100 computer system. This model provides sufficient fidelity on the dynamics of major engine components and yet simplified enough to be executed in real time. The hardware-in-the-loop type simulation and analysis becomes necessary as NASA is continuously improving the SSME technology, some with significant changes in the dynamics of the engine. The many issues of interfaces between new components and the engine can be better understood and be resolved prior to the firing of the engine. In this paper, the SSME real time simulation Lab at the MSFC, the SSME real time model, SSME engine and control system stability analysis, both in real time and non-real time is presented.

  14. A system for EPID-based real-time treatment delivery verification during dynamic IMRT treatment

    Energy Technology Data Exchange (ETDEWEB)

    Fuangrod, Todsaporn [Faculty of Engineering and Built Environment, School of Electrical Engineering and Computer Science, the University of Newcastle, NSW 2308 (Australia); Woodruff, Henry C.; O’Connor, Daryl J. [Faculty of Science and IT, School of Mathematical and Physical Sciences, the University of Newcastle, NSW 2308 (Australia); Uytven, Eric van; McCurdy, Boyd M. C. [Division of Medical Physics, CancerCare Manitoba, 675 McDermot Avenue, Winnipeg, Manitoba R3E 0V9 (Canada); Department of Physics and Astronomy, University of Manitoba, Winnipeg, Manitoba R3T 2N2 (Canada); Department of Radiology, University of Manitoba, Winnipeg, Manitoba R3T 2N2 (Canada); Kuncic, Zdenka [School of Physics, University of Sydney, Sydney, NSW 2006 (Australia); Greer, Peter B. [Faculty of Science and IT, School of Mathematical and Physical Sciences, the University of Newcastle, NSW 2308, Australia and Department of Radiation Oncology, Calvary Mater Newcastle Hospital, Locked Bag 7, Hunter region Mail Centre, Newcastle, NSW 2310 (Australia)

    2013-09-15

    Purpose: To design and develop a real-time electronic portal imaging device (EPID)-based delivery verification system for dynamic intensity modulated radiation therapy (IMRT) which enables detection of gross treatment delivery errors before delivery of substantial radiation to the patient.Methods: The system utilizes a comprehensive physics-based model to generate a series of predicted transit EPID image frames as a reference dataset and compares these to measured EPID frames acquired during treatment. The two datasets are using MLC aperture comparison and cumulative signal checking techniques. The system operation in real-time was simulated offline using previously acquired images for 19 IMRT patient deliveries with both frame-by-frame comparison and cumulative frame comparison. Simulated error case studies were used to demonstrate the system sensitivity and performance.Results: The accuracy of the synchronization method was shown to agree within two control points which corresponds to approximately ∼1% of the total MU to be delivered for dynamic IMRT. The system achieved mean real-time gamma results for frame-by-frame analysis of 86.6% and 89.0% for 3%, 3 mm and 4%, 4 mm criteria, respectively, and 97.9% and 98.6% for cumulative gamma analysis. The system can detect a 10% MU error using 3%, 3 mm criteria within approximately 10 s. The EPID-based real-time delivery verification system successfully detected simulated gross errors introduced into patient plan deliveries in near real-time (within 0.1 s).Conclusions: A real-time radiation delivery verification system for dynamic IMRT has been demonstrated that is designed to prevent major mistreatments in modern radiation therapy.

  15. Screening and reconstruction of real-time traffic data

    Institute of Scientific and Technical Information of China (English)

    裴玉龙; 马骥

    2003-01-01

    The quality of real-time traffic information is of the great importance, therefore the factors having effect on traffic characteristics are analyzed in general, and the necessities of real-time data processing are summarized. The identification and reconstruction of real-time traffic data are analyzed using Kalman filter equation and statistical approach. Four methods for ITS (Intelligent transportation system) detector data screening in traffic management systems are discussed in detail. Meanwhile traffic data examinations are discussed with solutions formulated through analysis, and recommendations are made for information collection and data management in future.

  16. Real-time simulation of hand motion for prosthesis control.

    Science.gov (United States)

    Blana, Dimitra; Chadwick, Edward K; van den Bogert, Antonie J; Murray, Wendy M

    2017-04-01

    Individuals with hand amputation suffer substantial loss of independence. Performance of sophisticated prostheses is limited by the ability to control them. To achieve natural and simultaneous control of all wrist and hand motions, we propose to use real-time biomechanical simulation to map between residual EMG and motions of the intact hand. Here we describe a musculoskeletal model of the hand using only extrinsic muscles to determine whether real-time performance is possible. Simulation is 1.3 times faster than real time, but the model is locally unstable. Methods are discussed to increase stability and make this approach suitable for prosthesis control.

  17. Real-Time Obstacle Detection Approach using Stereoscopic Images

    Directory of Open Access Journals (Sweden)

    Nadia Baha

    2014-02-01

    Full Text Available In this paper, we propose a new and simple approach to obstacle and free space detection in an indoor and outdoor environment in real-time using stereo vision as sensor. The real-time obstacle detection algorithm uses two dimensional disparity map to detect obstacles in the scene without constructing the ground plane. The proposed approach combines an accumulating and thresholding techniques to detect and cluster obstacle pixels into objects using a dense disparity map. The results from both analysis modules are combined to provide information of the free space. Experimental results are presented to show the effectiveness of the proposed method in real-time.

  18. Real-Time Mass Passenger Transport Network Optimization Problems

    OpenAIRE

    2005-01-01

    The aim of Real-Time Mass Transport Vehicle Routing Problem (MTVRP) is to find a solution to route n vehicles in real time to pick up and deliver m passengers. This problem is described in the context of flexible large-scale mass transportation options that use new technologies for communication among passengers and vehicles. The solution of such a problem is relevant to future transportation options involving large scale real-time routing of shared-ride fleet transit vehicles. However, the g...

  19. The Durham adaptive optics real-time controller

    CERN Document Server

    Basden, Alastair; Myers, Richard; Younger, Eddy

    2010-01-01

    The Durham adaptive optics real-time controller was initially a proof of concept design for a generic adaptive optics control system. It has since been developed into a modern and powerful CPU based real-time control system, capable of using hardware acceleration (including FPGAs and GPUs), based primarily around commercial off the shelf hardware. It is powerful enough to be used as the real-time controller for all currently planned 8~m class telescope adaptive optics systems. Here we give details of this controller and the concepts behind it, and report on performance including latency and jitter, which is less than 10~$\\mu$s for small adaptive optics systems.

  20. A framework to model real-time databases

    CERN Document Server

    Idoudi, Nizar; Duvallet, Claude; Sadeg, Bruno; Bouaziz, Rafik; Gargouri, Faiez

    2010-01-01

    Real-time databases deal with time-constrained data and time-constrained transactions. The design of this kind of databases requires the introduction of new concepts to support both data structures and the dynamic behaviour of the database. In this paper, we give an overview about different aspects of real-time databases and we clarify requirements of their modelling. Then, we present a framework for real-time database design and describe its fundamental operations. A case study demonstrates the validity of the structural model and illustrates SQL queries and Java code generated from the classes of the model

  1. Real-time embedded systems design principles and engineering practices

    CERN Document Server

    Fan, Xiaocong

    2015-01-01

    This book integrates new ideas and topics from real time systems, embedded systems, and software engineering to give a complete picture of the whole process of developing software for real-time embedded applications. You will not only gain a thorough understanding of concepts related to microprocessors, interrupts, and system boot process, appreciating the importance of real-time modeling and scheduling, but you will also learn software engineering practices such as model documentation, model analysis, design patterns, and standard conformance. This book is split into four parts to help you

  2. Real-time visualization of nanoparticles interacting with glioblastoma stem cells.

    Science.gov (United States)

    Pohlmann, Elliot S; Patel, Kaya; Guo, Sujuan; Dukes, Madeline J; Sheng, Zhi; Kelly, Deborah F

    2015-04-08

    Nanoparticle-based therapy represents a novel and promising approach to treat glioblastoma, the most common and lethal malignant brain cancer. Although similar therapies have achieved significant cytotoxicity in cultured glioblastoma or glioblastoma stem cells (GSCs), the lack of an appropriate approach to monitor interactions between cells and nanoparticle-based therapies impedes their further clinical application in human patients. To address this critical issue, we first obtained NOTCH1 positive GSCs from patient-derived primary cultures. We then developed a new imaging approach to directly observe the dynamic nature of nanoparticles at the molecular level using in situ transmission electron microscopy (TEM). Utilizing these tools we were able to visualize real-time movements of nanoparticles interacting with GSCs for the first time. Overall, we show strong proof-of-concept results that real-time visualization of nanoparticles in single cells can be achieved at the nanoscale using TEM, thereby providing a powerful platform for the development of nanotherapeutics.

  3. Integration of Geo-Sensor Feeds and Event Consumer Services for Real-Time Representation of Iot Nodes

    Science.gov (United States)

    Isikdag, U.; Pilouk, M.

    2016-06-01

    More and more devices are starting to be connected to the Internet every day. Internet-of-Things (IoT) is known as an architecture where online devices have the ability to communicate and interact with each other in real-time. On the other hand, with the development of IoT related technologies information about devices (i.e. Things) can be acquired in real-time by the humans. The implementation of IoT related technologies requires new approaches to be investigated for novel system architectures. These architectures need to have 3 main abilities. The first one is the ability is to store and query information coming from millions of devices in real-time. The second one is the ability to interact with large number of devices seamlessly regardless of their hardware and their software platforms. The final one is the ability to visualise and present information coming from millions of sensors in real time. The paper provides an architectural approach and implementation tests for storage, exposition and presentation of large amounts of real-time geo-information coming from multiple IoT nodes (and sensors).

  4. Impact of different cloud deployments on real-time video applications for mobile video cloud users

    Science.gov (United States)

    Khan, Kashif A.; Wang, Qi; Luo, Chunbo; Wang, Xinheng; Grecos, Christos

    2015-02-01

    The latest trend to access mobile cloud services through wireless network connectivity has amplified globally among both entrepreneurs and home end users. Although existing public cloud service vendors such as Google, Microsoft Azure etc. are providing on-demand cloud services with affordable cost for mobile users, there are still a number of challenges to achieve high-quality mobile cloud based video applications, especially due to the bandwidth-constrained and errorprone mobile network connectivity, which is the communication bottleneck for end-to-end video delivery. In addition, existing accessible clouds networking architectures are different in term of their implementation, services, resources, storage, pricing, support and so on, and these differences have varied impact on the performance of cloud-based real-time video applications. Nevertheless, these challenges and impacts have not been thoroughly investigated in the literature. In our previous work, we have implemented a mobile cloud network model that integrates localized and decentralized cloudlets (mini-clouds) and wireless mesh networks. In this paper, we deploy a real-time framework consisting of various existing Internet cloud networking architectures (Google Cloud, Microsoft Azure and Eucalyptus Cloud) and a cloudlet based on Ubuntu Enterprise Cloud over wireless mesh networking technology for mobile cloud end users. It is noted that the increasing trend to access real-time video streaming over HTTP/HTTPS is gaining popularity among both research and industrial communities to leverage the existing web services and HTTP infrastructure in the Internet. To study the performance under different deployments using different public and private cloud service providers, we employ real-time video streaming over the HTTP/HTTPS standard, and conduct experimental evaluation and in-depth comparative analysis of the impact of different deployments on the quality of service for mobile video cloud users. Empirical

  5. Exploring the Ocean Remotely and in Real-Time With HiSeasNet

    Science.gov (United States)

    Foley, S.; Berger, J.; Orcutt, J.; Vernon, F. L.

    2007-12-01

    HiSeasNet is a satellite communications network providing continuous Internet connectivity for oceanographic research ships and platforms throughout the Pacific, Atlantic, and Indian oceans. With the addition of new vessels and satellites in the network, HiSeasNet now uses five satellite beams to extend campus networks out to 13 ships at sea as well as a seismic observatory on South Georgia Island in the Southern Ocean. This year (2007) HiSeasNet has also supported ship operations in the Indian Ocean using a ground station in Germany. Employing a variety of networking technologies, HiSeasNet has allowed scientists to conduct videoconference outreach programs, maintain limited long-term real-time data collection, connect campus phones to shipboard phones through the ship's PBX using Voice over IP (VoIP) protocols, and direct multi-ship research from shore and other ships. Standard Internet protocols available include FTP, https, and ssh. With still more bandwidth available for data, this system can provide new opportunities for enhancing ship-based ocean exploration as well as supporting the long-term data collection projects such as those proposed in the NSF's Ocean Observatories Initiative program. The highest data rate achieved to date was 19 Mbps from the R/V Thomas Thompson off Vancouver. This involved a temporary conversion of the 2.4m shipboard antenna to Ku-Band for relaying HD video from the seafloor to the Internet ashore for real-time imagery of vent activity on the seafloor. The R/V Roger Revelle and R/V Melville include NSF Real-time Observatory and Data management Network (ROADNet) Points- of-Presence aboard ship for buffering and delivering shipboard data to shore continuously and in near-real-time. ROADNet is providing the baseline technology for the OOI Cyberinfrastructure Implementing Organization - the extension of this capability to more of the UNOLS fleet can provide near-real-time data for the OOI for non- proprietary data (e.g. meteorology and

  6. RadNet-Air Near Real Time Data

    Data.gov (United States)

    U.S. Environmental Protection Agency — RadNet-Air is a national network of air monitoring stations that regularly collect air samples for near real time analysis of radioactivity. The data is transmitted...

  7. Estimating correlation for a real-time measure of connectivity.

    Science.gov (United States)

    Arunkumar, Akhil; Panday, Ashish; Joshi, Bharat; Ravindran, Arun; Zaveri, Hitten P

    2012-01-01

    There has recently been considerable interest in connectivity analysis of fMRI and scalp and intracranial EEG time-series. The computational requirements of the pair-wise correlation (PWC), the core time-series measure used to estimate connectivity, presents a challenge to the real-time estimation of the PWC between all pairs of multiple time-series. We describe a parallel algorithm for computing PWC in real-time for streaming data from multiple channels. The algorithm was implemented on the Intel Xeon™ and IBM Cell Broadband Engine™ platforms. We evaluated time to estimate correlation for signals recorded with different acquisition parameters as a comparison to real-time constraints. We demonstrate that the execution time of these efficient implementations meet real-time constraints in most instances.

  8. True Time API Link (real time arrival info)

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This link will take you to the site where you can create an account to access Port Authority's real time arrival information. To request access to Port Authority's...

  9. The Effects of Real-Time Interactive Multimedia Teleradiology System.

    Science.gov (United States)

    Al-Safadi, Lilac

    2016-01-01

    This study describes the design of a real-time interactive multimedia teleradiology system and assesses how the system is used by referring physicians in point-of-care situations and supports or hinders aspects of physician-radiologist interaction. We developed a real-time multimedia teleradiology management system that automates the transfer of images and radiologists' reports and surveyed physicians to triangulate the findings and to verify the realism and results of the experiment. The web-based survey was delivered to 150 physicians from a range of specialties. The survey was completed by 72% of physicians. Data showed a correlation between rich interactivity, satisfaction, and effectiveness. The results of our experiments suggest that real-time multimedia teleradiology systems are valued by referring physicians and may have the potential for enhancing their practice and improving patient care and highlight the critical role of multimedia technologies to provide real-time multimode interactivity in current medical care.

  10. Hard-real-time resource management for autonomous spacecraft

    Science.gov (United States)

    Gat, E.

    2000-01-01

    This paper describes tickets, a computational mechanism for hard-real-time autonomous resource management. Autonomous spacecraftcontrol can be considered abstractly as a computational process whose outputs are spacecraft commands.

  11. Real-Time Multi-Directional Equipment Site

    Data.gov (United States)

    Federal Laboratory Consortium — As part of the George E. Brown, Jr. Network for Earthquake Engineering Simulation (NEES) Program, Lehigh University has established the Real-Time Multi-Directional...

  12. UML statechart based rigorous modeling of real-time system

    Institute of Scientific and Technical Information of China (English)

    LAI Ming-zhi; YOU Jin-yuan

    2005-01-01

    Rigorous modeling could ensure correctness and could verify a reduced cost in embedded real-time system development for models. Software methods are needed for rigorous modeling of embedded real-time systems. PVS is a formal method with precise syntax and semantics defined. System modeled by PVS specification could be verified by tools. Combining the widely used UML with PVS, this paper provides a novel modeling and verification approach for embedded real-time systems. In this approach, we provide 1 ) a time-extended UML statechart for modeling dynamic behavior of an embedded real-time system; 2) an approach to capture timed automata based semantics from a timed statechart; and 3) an algorithm to generate a finite state model expressed in PVS specification for model checking. The benefits of our approach include flexibility and user friendliness in modeling, extendability in formalization and verification content, and better performance. Time constraints are modeled and verified and is a highlight of this paper.

  13. Scheduling Algorithms Based on Weakly Hard Real-Time Constraints

    Institute of Scientific and Technical Information of China (English)

    TU Gang (涂刚); YANG FuMin (阳富民); LU YanSheng (卢炎生)

    2003-01-01

    The problem of scheduling weakly hard real-time tasks is addressed in this paper.The paper first analyzes the characters ofμ-pattern and weakly hard real-time constraints, then,presents two scheduling algorithms, Meet Any Algorithm and Meet Row Algorithm, for weakly hard real-time systems. Different from traditional algorithms used to guarantee deadlines, Meet Any Algorithm and Meet Row Algorithm can guarantee both deadlines and constraints. Meet Any Algorithm and Meet Row Algorithm try to find out the probabilities of tasks breaking constraints and increase task's priority in advance, but not till the last moment. Simulation results show that these two algorithms are better than other scheduling algorithms dealing with constraints and can largely decrease worst-case computation time of real-time tasks.

  14. Comparison of conventional culture and real-time quantitative PCR ...

    African Journals Online (AJOL)

    2009-10-28

    Oct 28, 2009 ... Results of real-time PCR were compared to con- ventional analysis .... water bath (Selecta 40W power, 40 kHz ultrasound fre- quency). ..... mental distributions of Legionella strains in France are different. J. clin. Microbiol.

  15. NOAA Ship Nancy Foster Underway Meteorological Data, Near Real Time

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA Ship Nancy Foster Underway Meteorological Data (Near Real Time, updated daily) are from the Shipboard Automated Meteorological and Oceanographic System (SAMOS)...

  16. NOAA Ship Oregon II Underway Meteorological Data, Near Real Time

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA Ship Oregon II Underway Meteorological Data (Near Real Time, updated daily) are from the Shipboard Automated Meteorological and Oceanographic System (SAMOS)...

  17. NOAA Ship Pisces Underway Meteorological Data, Near Real Time

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA Ship Pisces Underway Meteorological Data (Near Real Time, updated daily) are from the Shipboard Automated Meteorological and Oceanographic System (SAMOS)...

  18. NOAA Ship Gordon Gunter Underway Meteorological Data, Near Real Time

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA Ship Gordon Gunter Underway Meteorological Data (Near Real Time, updated daily) are from the Shipboard Automated Meteorological and Oceanographic System (SAMOS)...

  19. NOAA Ship Okeanos Explorer Underway Meteorological Data, Near Real Time

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA Ship Okeanos Explorer Underway Meteorological Data (Near Real Time, updated daily) are from the Shipboard Automated Meteorological and Oceanographic System...

  20. NOAA Ship Rainier Underway Meteorological Data, Near Real Time

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA Ship Rainier Underway Meteorological Data (Near Real Time, updated daily) are from the Shipboard Automated Meteorological and Oceanographic System (SAMOS)...

  1. Real-time water quality monitoring and providing water quality ...

    Science.gov (United States)

    EPA and the U.S. Geological Survey (USGS) have initiated the “Village Blue” research project to provide real-time water quality monitoring data to the Baltimore community and increase public awareness about local water quality in Baltimore Harbor and the Chesapeake Bay. The Village Blue demonstration project complements work that a number of state and local organizations are doing to make Baltimore Harbor “swimmable and fishable” 2 by 2020. Village Blue is designed to build upon EPA’s “Village Green” project which provides real-time air quality information to communities in six locations across the country. The presentation, “Real-time water quality monitoring and providing water quality information to the Baltimore Community”, summarizes the Village Blue real-time water quality monitoring project being developed for the Baltimore Harbor.

  2. Decision graphs: a tool for developing real-time software

    Energy Technology Data Exchange (ETDEWEB)

    Kozubal, A.J.

    1981-01-01

    The use of decision graphs in the preparation of, in particular, real-time software is briefly described. The usefulness of decision graphs in software design, testing, and maintenance is pointed out. 2 figures. (RWR)

  3. RadNet Real-Time Monitoring Spectrometry Data Inventory

    Data.gov (United States)

    U.S. Environmental Protection Agency — The RadNet Real-Time Monitoring Spectrometry Data Inventory contains measured data used to identify and measure specific radioactive materials in the atmosphere at...

  4. Novel Real-Time Flight Envelope Monitoring System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed innovation is an aircraft flight envelope monitoring system that will provide real-time in-cockpit estimations of aircraft flight envelope boundaries,...

  5. Real-time Position Control of Concentric Tube Robots.

    Science.gov (United States)

    Dupont, Pierre E; Lock, Jesse; Itkowitz, Brandon

    2010-05-03

    A novel approach to constructing robots is based on concentrically combining pre-curved elastic tubes. By rotating and extending the tubes with respect to each other, their curvatures interact elastically to position and orient the robot's tip, as well as to control the robot's shape along its length. Since these robots form slender curves, they are well suited for minimally invasive medical procedures. A substantial challenge to their practical use is the real-time solution of their kinematics that are described by differential equations with split boundary equations. This paper proposes a numerically efficient approach to real-time position control. It is shown that the forward kinematics are smooth functions that can be pre-computed and accurately approximated using Fourier series. The inverse kinematics can be solved in real time using root finding applied to the functional approximation. Experimental demonstration of real-time position control using this approach is also described.

  6. Novel Real-Time Flight Envelope Monitoring System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed innovation is an aircraft flight envelope monitoring system that will provide real-time in-cockpit estimations of aircraft flight envelope boundaries....

  7. Real Time Scheduling Services for Distributed RT-CORBA Applications

    Directory of Open Access Journals (Sweden)

    Bineta Tresa Mathew

    2012-12-01

    Full Text Available Distributed computing environment is flexible to control in complex embedded systems and their software components gain complexity when these systems are equipped with many microcontrollers and software object which covers diverse platforms, this system is called as DRE system. These DRE systems need new inter-object communication solution thus QoS-enabled middleware services and mechanisms have begun to emerge. Real-time application domain benefit from flexible and open distributed architectures, such as those defined by the CORBA specification. CORBA is well-suited to conventional request/response applications, but not suited to real-time applications due to the lack of QoS features and performance optimizations. The paper shows the design and implementation of the high performance scheduling technique for the real time applications domain with CORBA systems. Four different algorithms are compared by using attributes of real time tasks constraints based on CORBA specification such as RMS, MLF, MUF and EDF.

  8. 3D Flash LIDAR Real-Time Embedded Processing Project

    Data.gov (United States)

    National Aeronautics and Space Administration — 3D Flash LIDAR (3DFL) is ideal for determining real-time spacecraft trajectory, speed and orientation to the planet surface, as well as evaluating potential hazards...

  9. Real-Time Smart Tools for Processing Spectroscopy Data Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose novel and real-time smart software tools to process spectroscopy data. Material abundance or compositional maps will be generated for rover guidance,...

  10. NOAA Ship Oscar Dyson Underway Meteorological Data, Near Real Time

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA Ship Oscar Dyson Underway Meteorological Data (Near Real Time, updated daily) are from the Shipboard Automated Meteorological and Oceanographic System (SAMOS)...

  11. Analyzing Real-Time Systems: Theory and Tools

    DEFF Research Database (Denmark)

    Hune, Thomas Seidelin

    The main topic of this dissertation is the development and use of methods for formal reasoning about the correctness of real-time systems, in particular methods and tools to handle new classes of problems. In real-time systems the correctness of the system does not only depend on the order in which...... actions take place, but also the timing of the actions. The formal reasoning presented here is based on (extensions of) the model of timed automata and tools supporting this model, mainly UPPAAL. Real-time systems are often part of safety critical systems e.g. control systems for planes, trains......, or factories, though also everyday electronics as audio/video equipment and (mobile) phones are considered real-time systems. Often these systems are concurrent systems with a number of components interacting, and reasoning about such systems is notoriously difficult. However, since most of the systems...

  12. Real Time Control Software for Electromagnetic Formation Flight Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose the development of a maintainable and evolvable real-time control software system for Electromagnetic Formation Flight (EMFF). EMFF systems use...

  13. NOAA Ship Ronald Brown Underway Meteorological Data, Near Real Time

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA Ship Ronald Brown Underway Meteorological Data (Near Real Time, updated daily) are from the Shipboard Automated Meteorological and Oceanographic System (SAMOS)...

  14. NOAA Ship Fairweather Underway Meteorological Data, Near Real Time

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA Ship Fairweather Underway Meteorological Data (Near Real Time, updated daily) are from the Shipboard Automated Meteorological and Oceanographic System (SAMOS)...

  15. A New Scheduling Algorithms For Real Time Tasks

    CERN Document Server

    Yaashuwanth, C

    2009-01-01

    The main objective of this paper is to develop the two different ways in which round robin architecture is modified and made suitable to be implemented in real time and embedded systems. The scheduling algorithm plays a significant role in the design of real time embedded systems. Simple round robin architecture is not efficient to be implemented in embedded systems because of higher context switch rate, larger waiting time and larger response time. Missing of deadlines will degrade the system performance in soft real time systems. The main objective of this paper is to develop the scheduling algorithm which removes the drawbacks in simple round robin architecture. A comparison with round robin architecture to the proposed architectures has been made. It is observed that the proposed architectures solves the problems encountered in round robin architecture in soft real time by decreasing the number of context switches waiting time and response time thereby increasing the system throughput.

  16. Study on the Bus Real-time Dispatching Model

    Institute of Scientific and Technical Information of China (English)

    YingZou; JianguoLi; JianhuaHuang; ZhenminTang

    2004-01-01

    The real-time dispatching model on bus system is studied in this article. Realtime dispatching can resume the planned schedule quickly, and then to ensure the reliability of the public transport service and to well raise the service quality.

  17. 3D Flash LIDAR Real-Time Embedded Processing Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) is a small business, which has developed a compact, eye-safe 3D Flash LIDARTM Camera (FLC) well suited for real-time...

  18. Cluster Computing for Embedded/Real-Time Systems

    Science.gov (United States)

    Katz, D.; Kepner, J.

    1999-01-01

    Embedded and real-time systems, like other computing systems, seek to maximize computing power for a given price, and thus can significantly benefit from the advancing capabilities of cluster computing.

  19. Games and Scenarios for Real-Time System Validation

    DEFF Research Database (Denmark)

    Li, Shuhao

    This thesis presents research on the validation of real-time embedded software systems in the context of model-based development. The thesis proposes scenario-based and game-theoretic approaches to system analysis, verification, synthesis and testing to address the challenges that arise from....... By linking our prototype translators with existing model checker Uppaal and game solver Uppaal-Tiga, we show that these methods contribute to the interaction correctness and timeliness of early system designs. The thesis also shows that testing a real-time reactive system can be viewed as playing a timed...... communicating real-time systems can be modeled and specified with LSC. By translating LSC to timed automata (TAs), we reduce scenario-based model consistency checking and property verification to CTL real-time model checking problems, and reduce scenario-based synthesis to a timed game solving problem...

  20. Specification and compilation of real-time stream processing applications

    NARCIS (Netherlands)

    Geuns, Stephanus Joannes

    2015-01-01

    This thesis is concerned with the specification, compilation and corresponding temporal analysis of real-time stream processing applications that are executed on embedded multiprocessor systems. An example of such applications are software defined radio applications. These applications typically hav

  1. Transformer real-time reliability model based on operating conditions

    Institute of Scientific and Technical Information of China (English)

    HE Jian; CHENG Lin; SUN Yuan-zhang

    2007-01-01

    Operational reliability evaluation theory reflects real-time reliability level of power system. The component failure rate varies with operating conditions. The impact of real-time operating conditions such as ambient temperature and transformer MVA (megavolt-ampere) loading on transformer insulation life is studied in this paper. The formula of transformer failure rate based on the winding hottest-spot temperature (HST) is given. Thus the real-time reliability model of transformer based on operating conditions is presented. The work is illustrated using the 1979 IEEE Reliability Test System. The changes of operating conditions are simulated by using hourly load curve and temperature curve, so the curves of real-time reliability indices are obtained by using operational reliability evaluation.

  2. Optical Real-Time Space Radiation Monitor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Real-time dosimetry is needed to provide immediate feedback, so astronauts can minimize their exposure to ionizing radiation during periods of high solar activity....

  3. Axo: Masking Delay Faults in Real-Time Control Systems

    OpenAIRE

    Maaz, Mashood Mohiuddin; Saab, Wajeb; Bliudze, Simon; Le Boudec, Jean-Yves

    2016-01-01

    We consider real-time control systems that consist of a controller that computes and sends setpoints to be implemented in physical processes through process agents. We focus on systems that use commercial off-the-shelf hardware and software components. Setpoints of these systems have strict real-time constraints: Implementing a setpoint after its deadline, or not receiving setpoints within a deadline, can cause failure. In this paper, we address delay faults: faults that cause setpoints to vi...

  4. Migrating to a real-time distributed parallel simulator architecture

    CSIR Research Space (South Africa)

    Duvenhage, B

    2007-07-01

    Full Text Available DEVS. Ogata, et al. [7] tested the real-time performance of DIS and different versions of the RTI-NG HLA Run-Time Infrastructure (RTI). Their real-time vehicle model simulation within a 3D graphi- cal environment reached a frame rate ceiling... to mili- tary training simulation: A guide for discrete event sim- ulationists. In Proceedings of the 1998 Winter Simula- tion Conference, 1998. [7] Michihiko Ogata, Akira Higashide, Mike Cammarano, and Toshinao Takagi. Rti performance...

  5. Real time simulator with Ti floating point digital signal processor

    Energy Technology Data Exchange (ETDEWEB)

    Razazian, K.; Bobis, J.P.; Dieckman, S.L.; Raptis, A.C.

    1994-08-01

    This paper describes the design and operation of a Real Time Simulator using Texas Instruments TMS320C30 digital signal processor. This system operates with two banks of memory which provide the input data to digital signal processor chip. This feature enables the TMS320C30 to be utilized in variety of applications for which external connections to acquire input data is not needed. In addition, some practical applications of this Real Time Simulator are discussed.

  6. Analysis and Synthesis of Distributed Real-Time Embedded Systems

    DEFF Research Database (Denmark)

    Pop, Paul; Eles, Petru; Peng, Zebo

    Embedded computer systems are now everywhere: from alarm clocks to PDAs, from mobile phones to cars, almost all the devices we use are controlled by embedded computers. An important class of embedded computer systems is that of hard real-time systems, which have to fulfill strict timing...... in important reductions of design costs. Analysis and Synthesis of Distributed Real-Time Embedded Systems will be of interest to advanced undergraduates, graduate students, researchers and designers involved in the field of embedded systems....

  7. Multi-Threat Real-Time Separating System

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    This paper describes a multi-threat real-time separating system for broadband anti-radiation missile seeker.It presents a method, with a dual-port memory as comparer, to perform PF and PW hardware real-time separation and to determine the time-of-arrival (TOA) by use of sequential difference histogram (SDIF). The method has been applied to practice, which has achieved good results.

  8. Real Time Collision Detection Using Depth Texturing Spheres

    Institute of Scientific and Technical Information of China (English)

    WANG Ji; ZHAI Zhengjun; CAI Xiaobin

    2006-01-01

    In this paper, we present a novel collision detection algorithm to real time detect the collisions of objects. We generate sphere textures of objects, and use programmable graphics hardware to mapping texture and check the depth of different objects to detect the collision. We have implemented the algorithm and compared it with CULLIDE. The result shows that our algorithm is more effective than CULLIDE and has fixed executive time to suit for real-time applications.

  9. Can Real-Time Data Also Be Climate Quality?

    Science.gov (United States)

    Brewer, M.; Wentz, F. J.

    2015-12-01

    GMI, AMSR-2 and WindSat herald a new era of highly accurate and timely microwave data products. Traditionally, there has been a large divide between real-time and re-analysis data products. What if these completely separate processing systems could be merged? Through advanced modeling and physically based algorithms, Remote Sensing Systems (RSS) has narrowed the gap between real-time and research-quality. Satellite microwave ocean products have proven useful for a wide array of timely Earth science applications. Through cloud SST capabilities have enormously benefited tropical cyclone forecasting and day to day fisheries management, to name a few. Oceanic wind vectors enhance operational safety of shipping and recreational boating. Atmospheric rivers are of import to many human endeavors, as are cloud cover and knowledge of precipitation events. Some activities benefit from both climate and real-time operational data used in conjunction. RSS has been consistently improving microwave Earth Science Data Records (ESDRs) for several decades, while making near real-time data publicly available for semi-operational use. These data streams have often been produced in 2 stages: near real-time, followed by research quality final files. Over the years, we have seen this time delay shrink from months or weeks to mere hours. As well, we have seen the quality of near real-time data improve to the point where the distinction starts to blur. We continue to work towards better and faster RFI filtering, adaptive algorithms and improved real-time validation statistics for earlier detection of problems. Can it be possible to produce climate quality data in real-time, and what would the advantages be? We will try to answer these questions…

  10. Collaborative Real-time Digital Reference Services in Academic Libraries

    Directory of Open Access Journals (Sweden)

    Shiao-Feng Su

    2004-03-01

    Full Text Available The real-time digital reference service is valued by most academic librarians in United States. To make the collaborative real-time digital reference service viable in academic library service, the libraries need to understand the information seeking behavior of potential users and to train the staff well. The participating libraries also need to coordinate the following issues in advance: quality control, question routing, network standards, cultural and political sensitivities, communication, copyright, and marketing. [Article content in Chinese

  11. Implementation of real-time duplex synthetic aperture ultrasonography

    DEFF Research Database (Denmark)

    Hemmsen, Martin Christian; Larsen, Lee; Kjeldsen, Thomas;

    2015-01-01

    This paper presents a real-time duplex synthetic aperture imaging system, implemented on a commercially available tablet. This includes real-time wireless reception of ultrasound signals and GPU processing for B-mode and Color Flow Imaging (CFM). The objective of the work is to investigate the im...... and that the required bandwidth between the probe and processing unit is within the current Wi-Fi standards....

  12. Real-Time Connect 4 Game Using Artificial Intelligence

    Directory of Open Access Journals (Sweden)

    Ahmad M. Sarhan

    2009-01-01

    Full Text Available Problem statement: The study presented a design that converted connect 4 game into a real-time game by incorporating time restraints. Approach: The design used Artificial Intelligence (AI in implementing the connect 4 game. The AI for this game was based on influence mapping. Results: A waterfall-based AI software was developed for a Connect 4 game. Conclusion: A real time connect 4 game was successfully designed and implanted with GUI using C++ programming language.

  13. Near real-time stereo matching using geodesic diffusion.

    Science.gov (United States)

    De-Maeztu, Leonardo; Villanueva, Arantxa; Cabeza, Rafael

    2012-02-01

    Adaptive-weight algorithms currently represent the state of the art in local stereo matching. However, due to their computational requirements, these types of solutions are not suitable for real-time implementation. Here, we present a novel aggregation method inspired by the anisotropic diffusion technique used in image filtering. The proposed aggregation algorithm produces results similar to adaptive-weight solutions while reducing the computational requirements. Moreover, near real-time performance is demonstrated with a GPU implementation of the algorithm.

  14. Design a Fault Tolerance for Real Time Distributed System

    OpenAIRE

    Ban M. Khammas

    2012-01-01

    This paper designed a fault tolerance for soft real time distributed system (FTRTDS). This system is designed to be independently on specific mechanisms and facilities of the underlying real time distributed system. It is designed to be distributed on all the computers in the distributed system and controlled by a central unit.Besides gathering information about a target program spontaneously, it provides information about the target operating system and the target hardware in order to diagno...

  15. THE DLSTRIBOTED MCU MODEL FOR SYNCHRONOUS REAL-TIME TELETEACHING

    Institute of Scientific and Technical Information of China (English)

    刘均; 李人厚; 郑庆华

    2004-01-01

    Aiming at issues on multimedia communication in synchronous real-time teleteaching (SRT) systems over IP network, a 4-tuple structural mode of multimedia communication is proposed in the paper, and an SRT-oriented distributed MCU model is built according to the mode. Moreover, the mechanism of multicast communication across subnets is discussed. The distributed MCU model has been applied successfully in our interactive synchronous real-time telesteaching system RealClass and has shown good extendibility in operation.

  16. The Dynamic Checking of Complex Real Time System

    Institute of Scientific and Technical Information of China (English)

    YU Chao; HUANG Benwen; WU Guoqing

    2006-01-01

    The paper presents an dynamic execution model of complex real-time software based on requirement description model RTRSM, and then propose a checking method based on configuration covering and its corresponding algorithm. This checking method can check the execution situations between parallel elements in a dynamic execution step of real-time software systems. It also can check all the states and transitions which assure the completeness of checking. In the end, related theorem is proofed.

  17. Real-time radiography at the NECTAR facility

    Energy Technology Data Exchange (ETDEWEB)

    Buecherl, T., E-mail: thomas.buecherl@radiochemie.de [Lehrstuhl fuer Radiochemie (RCM), Technische Universitaet Muenchen (TUM), Walther-Meissner-Str. 3, 85748 Garching (Germany); Lierse von Gostomski, Ch. [Lehrstuhl fuer Radiochemie (RCM), Technische Universitaet Muenchen (TUM), Walther-Meissner-Str. 3, 85748 Garching (Germany)

    2011-09-21

    A feasibility study has shown that real-time radiography using fission neutrons is possible at the NECTAR facility, when using an improved detection system for fast variations (Buecherl et al., 2009 ). Continuing this study, real-time measurements of slowly varying processes like the water uptake in medium sized trunks (diameter about 12 cm) and of slow periodic processes (e.g. a slowly rotating iron disk) are investigated successfully using the existing detection system.

  18. Streaming Surface Reconstruction from Real Time 3D Measurements

    OpenAIRE

    Bodenmüller, Tim

    2009-01-01

    In this thesis, a robust method for fast surface reconstruction from real time 3D point streams is presented. It is designed for the integration in a fast visual feedback system that supports a user while manually 3D scanning objects. The method iteratively generates a dense and homogeneous triangular mesh by inserting sample points from the real time data stream and refining the surface model locally. A spatial data structure ensures a fast access to growing point sets and continuously updat...

  19. A real time method for surface cleanliness measurement

    OpenAIRE

    Bilmes, Gabriel Mario; Orzi, Daniel Jesús Omar; Martínez , Oscar E.; Lencina, Alberto

    2005-01-01

    The measurement of surface cleanliness is a signifi cant problem in many industrial and technological processes. Existing methods are based on laboratory procedures, that are not performed in real time, can not be automated, and usually are restricted to a small portion of the sample. In this study we describe a new method for real time measurement of the amount of surface dirt or contamination deposited on a surface. It relies on the ablation of the surface dirt film by means of a ...

  20. Search-Space Characterization for Real-time Heuristic Search

    OpenAIRE

    Huntley, Daniel; Bulitko, Vadim

    2013-01-01

    Recent real-time heuristic search algorithms have demonstrated outstanding performance in video-game pathfinding. However, their applications have been thus far limited to that domain. We proceed with the aim of facilitating wider applications of real-time search by fostering a greater understanding of the performance of recent algorithms. We first introduce eight algorithm-independent complexity measures for search spaces and correlate their values with algorithm performance. The complexity ...