WorldWideScience

Sample records for reaffirmed documents incorporated

  1. 75 FR 22219 - Update of Revised and Reaffirmed Documents Incorporated by Reference

    Science.gov (United States)

    2010-04-28

    ... Standard 2172-09; Calculation of Gross Heating Value, Relative Density, Compressibility and Theoretical... Standard C 150-07, approved May 1, 2007, Standard Specification for Portland Cement. ASTM Standard C 330-05... Standard C 595-08, approved January 1, 2008, Standard Specification for Blended Hydraulic Cements...

  2. Present status of the EUR document the challenge of new incorporations

    International Nuclear Information System (INIS)

    Alomar, F.

    1998-01-01

    EUR (European Utilities Requirements) Document is in process, with DTN's active participation since the beginning. Two new Utilities representing non-European Union Countries (Switzerland and Russia) have joined the EUR Document Group of Sponsoring Utilities, whose members up to now belonged to nine utilities from European Union Countries. Although, in general terms, this incorporation is enriching, this late arrival does present problems due to the fact that the document is now under discussion the incorporation of different technological practices, and last but not least, different Licensing Approaches. Should be remembered that currently an overall review by the different Regulatory Bodies is in process and an intervention by the E.C. is being prepared. Both inside and outside of the European Continent, other Utilities have also shown their interest in the EUR Document. EUR Document Volume 3 sets a compliance evaluation between Projects from different Nuclear Island Manufactures and EUR's Top Tier Requirements (established in Volume 1) and Detailed Requirements (established in Volume 2). Presently a comparison is being carried out for three Nuclear Island Suppliers: ABB, NPI (KWU and Framatome Joint Venture) and Westinghouse. In the near future it is foreseen to initiate compliance evaluation for two more N.I. suppliers: General Electric and Rosenergatom. Challenges of these new incorporations are analyzed in what follows. (Author)

  3. Independence of scientific publishing. Reaffirming the principle.

    Science.gov (United States)

    Bjork, R A

    2000-09-01

    Historically, the American Psychological Association (APA), as part of its contract with the editors of APA journals, has granted to the editors sole responsibility to accept or reject manuscripts for publication, without such actions being open for review by APA. Such a policy fosters the freedom of inquiry and expression so necessary for a healthy science. It also serves to protect the Association because publication of an article in an APA journal does not represent endorsement by APA itself. The lessons of history are clear: When political or other pressures interfere with the autonomy of science, the societal and scientific consequences are grim. APA should reaffirm the principle that a healthy science of psychology requires an open exchange of ideas and findings.

  4. Reaffirming a long-standing partnership

    CERN Multimedia

    2010-01-01

    CERN welcomes many VIP visitors, and each one is special. However, last Saturday’s visit from Irina Bokova, the Director General of UNESCO, has particular significance. UNESCO was the organization that steered CERN into existence in the 1950s, and it is at UNESCO’s headquarters that our founding documents are held.    Today, CERN and UNESCO have much in common. Both have the promotion of science and of global cooperation as part of their missions, and both set great store by the power of education to change the world for the better. UNESCO has been an observer at the CERN Council ever since our foundation, and in recent years our converging interest in forging links with the developing world has seen important joint initiatives. In 2009, CERN held two schools in Kigali, Rwanda, covering the subjects of digital libraries and teacher training. Both promoted Rwandan and African expertise, and both were held within the framework of UNESCO’s International Basic...

  5. The Reaffirmation Professional Pedagogical in the formation of educators

    Directory of Open Access Journals (Sweden)

    Omar Blas Aulet-Álvarez

    2016-11-01

    Full Text Available The work undertakes the problem of the motivation professional pedagogical in the formation of the professional of the education, like one of the primary addresses of work educational that is carried out now. The reflections that socializing forms part of the inquiries carried out by the bus of investigators of the project institutional: The educational orientation in the formation of educators: Systematizing of results. Intentional the formative work through the strategy curricular of reaffirmation professional pedagogical like an alternating methodological that introduction in her practices. It is purpose of the authors, socialize the experiences reached in the educational practice that facilitate the motivation professional pedagogical stated explicitly in a group of strategic actions whose execution and effective control for the several buses pedagogical of the university, you contributed to perfect the process of the initial formation of students in the races pedagogical and with it elevate the quality of egression.

  6. Evaluation of a Parchment Document, the 13th Century Incorporation Charter for the City of Krakow, Poland, for Microbial Hazards.

    Science.gov (United States)

    Lech, Tomasz

    2016-05-01

    The literature of environmental microbiology broadly discusses issues associated with microbial hazards in archives, but these publications are mainly devoted to paper documents. There are few articles on historical parchment documents, which used to be very important for the development of literature and the art of writing. These studies present a broad spectrum of methods for the assessment of biodeterioration hazards of the parchment document in question. They are based on both conventional microbiological methods and advanced techniques of molecular biology. Here, a qualitative analysis was conducted, based on genetic identification of bacteria and fungi present on the document as well as denaturing gradient gel electrophoresis profiling and examining the destructive potential of isolated microbes. Moreover, the study involved a quantitative and qualitative microbiological assessment of the indoor air in the room where the parchment was kept. The microbes with the highest destructive potential that were isolated from the investigated item were Bacillus cereus and Acinetobacter lwoffii bacteria and Penicillium chrysogenum,Chaetomium globosum, and Trichoderma longibrachiatum fungi. The presence of the B. cereuss train was particularly interesting since, under appropriate conditions, it leads to complete parchment degradation within several days. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

  7. BENCHPAR PROJECT. How to Incorporate ThermaI-Hydro-Mechanical Coupled Processes into Performance Assessments and Design Studies for Radioactive Waste Disposal in Geological Formations. Guidance Document

    International Nuclear Information System (INIS)

    Stephansson, O.; Andersson, Johan

    2005-02-01

    The objective of this Guidance Document is to provide advice on how to incorporate thermo-hydro-mechanical (THM) coupled processes into Performance Assessments (PAS) and design studies for radioactive waste disposal in geological formations to be experienced in a European context. The document has been generated by the EU research project BENCHPAR: Benchmark Tests and Guidance on Coupled Processes for Performance Assessment of Nuclear Waste Repositories. The document starts in Section 1 with an explanation of why numerical analyses incorporating THM mechanisms are required for radioactive waste studies and provides background material on the subject. Then, the THM processes and their interactions are explained in Section 2. Three case examples of THM numerical analysis are presented in Section 3 to illustrate the type of work that can be conducted to study the near-field, upscaling, and the far-field. For the three cases, there is discussion on the main findings, the relevance to a safety case, the relative importance of the different couplings, and the uncertainties involved. The importance and priority of the THM couplings are then summarized in Section 4. It is especially important to be able to technically audit the numerical analyses in order to establish that all the relevant variables, parameters and mechanisms have been included in the modelling and hence that the numerical model adequately represents the rock and engineering reality. Accordingly, recommended soft and hard auditing procedures are presented in Section 5. In this Guidance Document, we emphasize especially that the most important step in numerical modelling is not executing the calculations per se, but the earlier conceptualization of the problem regarding the dominant processes, the material properties and parameters, the engineering perturbations, and their mathematical presentations. The associated modelling component of addressing the uncertainties and estimating their influence on the

  8. Theoretical considerations around teaching vocational reaffirmation in the context of Santiago de Cuba centers

    Directory of Open Access Journals (Sweden)

    Silally Betancourt-Rodríguez

    2016-11-01

    Full Text Available It is worrying that teachers in training who are inserted into teaching units to complete their work and research component not feel fully identified with the teaching profession, or are in their tutors assistance conscious and needed to successfully develop its work and reaffirm thus their interest in the race, this reveals shortcomings from the motivational point of view presented during the initial training process thereof, particularly those of mathematics career - Physical and lack of commitment of managers and staff with training from the teaching units. The aim is to reflect in relation to some theoretical considerations for developing teaching vocational reaffirmation of teachers in training this race in the context of the teaching unit. the theoretical analysis synthesis method was used during the investigation

  9. Documents at hand: learning from paper to improve digital technologies

    NARCIS (Netherlands)

    Bondarenko, O.; Janssen, Ruud; Veer, van der G.C.; Gayle, C.

    2005-01-01

    In this paper the results of a two-year ethnographic study of the personal document management of 28 information workers is described. Both the paper and digital domain were taken into account during the study. The results reaffirmed that document management is strongly related to task management.

  10. IPPF re-affirms its policy on sterilization: a free, informed and unpressured choice.

    Science.gov (United States)

    1977-01-01

    The IPPF has re-affirmed its policy on sterilization that individuals have the right to voluntarily choose a contraceptive method. A sterilization acceptor should understand all the implications and that the procedure should be considered irreversible, although medical techniques should be used to give the greatest chance of reversibility. An individual should know of alternative contraceptive methods and the risks and benefits involved with each. Incentives for family planning programs should ensure that benefits be in addition to the benefits and services which are entitled to everyone; likewise, any disincentives should not conflict with basic human rights. Family planning education should promote informed decisions on contraceptive use including sterilization procedures.

  11. Social inclusion of the poor: Concept for reaffirmation of social work

    Directory of Open Access Journals (Sweden)

    Petrović Jagoda

    2012-01-01

    Full Text Available There is no universal definition of poverty, but there universal the poverty problem. It is present throughout human history and is present in all contemporary societies. An integral part of poverty in contemporary developed societies are different forms of social exclusion. Social exclusion, as a consequence of material deprivation (poverty in the strict sense becomes a factor in the survival and deepening poverty. That is why the concept of social exclusion, adequate analytical tool for understanding the problems of poverty. Analogously, the concept of social inclusion is a suitable instrument for combating this problem. This concept is particularly important in societies that do not have the ability to fast economic prosperity overcome poverty. In such societies, social work is facing new challenges. These challenges are an opportunity for the reaffirmation of social work and taking a respectable role in the overall reaction to the social problem of poverty. Accepting the modern definition of poverty through the concept of social inclusion is particularly important for social work, whose epistemological and pragmatic polyvalence corresponds with multidimensional character of poverty.

  12. Parliamentarians from CIS and the Far East reaffirm commitment to population program. Parliamentarians conference in Ulaanbaatar.

    Science.gov (United States)

    1999-01-01

    This article summarizes the proceedings of the Parliamentarian Conference held in Ulaanbaatar, Mongolia. Parliamentarian representatives from Japan, South Korea, China, Russia, and Commonwealth of Independent States countries agreed to work together in providing better lives to their people through rational population planning. Problems faced by the region, as mentioned in the conference, include persistently high maternal and infant mortality, internal migration from rural to urban areas, high unemployment rate, lower enrollment of boys and men as compared to girls and women in educational institutions, and environmental problems such as soil erosion resulting from over grazing. In addition, member representatives presented the status of the region's reproductive health/rights, gender and population policy, food security and environment, and adolescents and elderly. It was noted that there has been significant progress in reproductive health, gender equality, agricultural sector, and legislation for the youth and the elderly. However, these issues still need to be improved and developed. The UN Population Fund has reinforced its commitment towards population and development programs in the region, and the parliamentarians have reaffirmed its commitment to creating the legal framework favorable to the implementation of the Program of Action in the Ulaanbaatar Declaration.

  13. The World Summit on Sustainable Development: reaffirming the centrality of health

    Directory of Open Access Journals (Sweden)

    von Schirnding Yasmin

    2005-05-01

    Full Text Available Abstract The World Summit on Sustainable Development (WSSD was held in Johannesburg in 2002 to review progress since the Rio conference in 1992, and to agree a new global deal on sustainable development. Unlike its predecessor, it was primarily concerned with implementation rather than with new treaties and targets, although a number of new targets were agreed, for example one on sanitation. Failure to agree a target on renewable energy was regarded as a major disappointment of the conference. While relatively modest in its achievements, and with difficulties in achieving consensus in key areas such as energy, trade, finance and globalisation, WSSD nevertheless succeeded in placing sustainable development back on the political agenda, giving new impetus, in particular to the environment and development needs of Africa, with a strong focus on local issues like household energy, water and sanitation. Health was singled out as one of five priority areas, along with water, energy, agriculture and biodiversity, and was devoted a separate chapter in the resulting Plan of Implementation, which highlighted a range of environmental health issues as well as issues relating to health services, communicable and non-communicable diseases. A number of new partnerships were formed at WSSD, including the Healthy Environments for Children Alliance (HECA launched by WHO, which will form an important platform for implementation. The Commission on Sustainable Development has been designated main responsibility for monitoring and follow up, with its programme of work reorganised to focus on thematic clusters of issues. From the perspective of health, WSSD must be seen as a reaffirmation of the central place of health on the sustainable development agenda, and in the broader context of a process which began in Rio and was given added impetus with the Monterrey Financing for Development conference and the World Trade Organisation meeting held in Doha. Translating

  14. Educational and individual factors associated with positive change in and reaffirmation of medical students' intention to practice in underserved areas.

    Science.gov (United States)

    Boscardin, Christy K; Grbic, Douglas; Grumbach, Kevin; O'Sullivan, Patricia

    2014-11-01

    The projected U.S. physician shortage will disproportionately affect underserved areas. This study examined the impact of medical school educational experiences on positive changes in and reaffirmation of students' intention to practice in underserved areas (practice intention). Medical students (n = 7,361) from 113 U.S. MD-granting medical schools who graduated in 2009-2010 and responded to both the Association of American Medical Colleges' 2006 Matriculating Student Questionnaire and 2010 Graduation Questionnaire were included. Multilevel logistic regression analyses were conducted to determine factors associated with change in and reaffirmation of practice intention. After controlling for individual characteristics, community health field experience (adjusted odds ratio [OR]: 1.36; 95% CI: 1.18, 1.57), learning another language (OR: 1.41; 95% CI: 1.22, 1.63), cultural competence/awareness experience (OR: 1.38; 95% CI: 1.21, 1.58), becoming more aware of perspectives of individuals from different backgrounds (OR: 1.24; 95% CI: 1.04, 1.48), and attending schools with higher social mission scores (OR: 1.66; 95% CI: 1.28, 2.16) were all significantly associated with positive changes in practice intention from matriculation to graduation. Field experience in community health (OR: 1.24; 95% CI: 0.99, 1.53), learning another language (OR: 1.29; 95% CI: 1.01, 1.65), and attending schools with higher social mission scores (OR: 1.62; 95% CI: 1.09, 2.43) were all significantly associated with reaffirmation of practice intention at graduation. Multifaceted factors are associated with practice intention. This study suggests medical schools can play active roles in alleviating the physician shortage in underserved areas through targeted curricular interventions and recruitment.

  15. Are PDF Documents Accessible?

    Directory of Open Access Journals (Sweden)

    Mireia Ribera Turró

    2008-09-01

    Full Text Available Adobe PDF is one of the most widely used formats in scientific communications and in administrative documents. In its latest versions it has incorporated structural tags and improvements that increase its level of accessibility. This article reviews the concept of accessibility in the reading of digital documents and evaluates the accessibility of PDF according to the most widely established standards.

  16. Standardization Documents

    Science.gov (United States)

    2011-08-01

    Specifications and Standards; Guide Specifications; CIDs; and NGSs . Learn. Perform. Succeed. STANDARDIZATION DOCUMENTS Federal Specifications Commercial...national or international standardization document developed by a private sector association, organization, or technical society that plans ...Maintain lessons learned • Examples: Guidance for application of a technology; Lists of options Learn. Perform. Succeed. DEFENSE HANDBOOK

  17. Maury Documentation

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Supporting documentation for the Maury Collection of marine observations. Includes explanations from Maury himself, as well as guides and descriptions by the U.S....

  18. Documentation Service

    International Nuclear Information System (INIS)

    Charnay, J.; Chosson, L.; Croize, M.; Ducloux, A.; Flores, S.; Jarroux, D.; Melka, J.; Morgue, D.; Mottin, C.

    1998-01-01

    This service assures the treatment and diffusion of the scientific information and the management of the scientific production of the institute as well as the secretariat operation for the groups and services of the institute. The report on documentation-library section mentions: the management of the documentation funds, search in international databases (INIS, Current Contents, Inspects), Pret-Inter service which allows accessing documents through DEMOCRITE network of IN2P3. As realizations also mentioned are: the setup of a video, photo database, the Web home page of the institute's library, follow-up of digitizing the document funds by integrating the CD-ROMs and diskettes, electronic archiving of the scientific production, etc

  19. Computerising documentation

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The nuclear power generation industry is faced with public concern and government pressures over safety, efficiency and risk. Operators throughout the industry are addressing these issues with the aid of a new technology - technical document management systems (TDMS). Used for strategic and tactical advantage, the systems enable users to scan, archive, retrieve, store, edit, distribute worldwide and manage the huge volume of documentation (paper drawings, CAD data and film-based information) generated in building, maintaining and ensuring safety in the UK's power plants. The power generation industry has recognized that the management and modification of operation critical information is vital to the safety and efficiency of its power plants. Regulatory pressure from the Nuclear Installations Inspectorate (NII) to operate within strict safety margins or lose Site Licences has prompted the need for accurate, up-to-data documentation. A document capture and management retrieval system provides a powerful cost-effective solution, giving rapid access to documentation in a tightly controlled environment. The computerisation of documents and plans is discussed in this article. (Author)

  20. Documentation of spectrom-32

    International Nuclear Information System (INIS)

    Callahan, G.D.; Fossum, A.F.; Svalstad, D.K.

    1989-01-01

    SPECTROM-32 is a finite element program for analyzing two-dimensional and axisymmetric inelastic thermomechanical problems related to the geological disposal of nuclear waste. The code is part of the SPECTROM series of special-purpose computer programs that are being developed by RE/SPEC Inc. to address many unique rock mechanics problems encountered in analyzing radioactive wastes stored in geologic formations. This document presents the theoretical basis for the mathematical models, the finite element formulation and solution procedure of the program, a description of the input data for the program, verification problems, and details about program support and continuing documentation. The computer code documentation is intended to satisfy the requirements and guidelines outlined in the document entitled Final Technical Position on Documentation of Computer Codes for High-Level Waste Management. The principal component models used in the program involve thermoelastic, thermoviscoelastic, thermoelastic-plastic, and thermoviscoplastic types of material behavior. Special material considerations provide for the incorporation of limited-tension material behavior and consideration of jointed material behavior. Numerous program options provide the capabilities for various boundary conditions, sliding interfaces, excavation, backfill, arbitrary initial stresses, multiple material domains, load incrementation, plotting database storage and access of results, and other features unique to the geologic disposal of radioactive wastes. Numerous verification problems that exercise many of the program options and illustrate the required data input and printed results are included in the documentation

  1. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted.   CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat a...

  2. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the natu...

  3. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the natur...

  4. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ Management- CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. Management - CB - MB - FB Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2007 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the nature of employment and ...

  5. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ Management- CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. Management - CB - MB - FB Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2007 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the nature of em¬pl...

  6. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the na...

  7. Two pathways to self-forgiveness: A hedonic path via self-compassion and a eudaimonic path via the reaffirmation of violated values.

    Science.gov (United States)

    Woodyatt, Lydia; Wenzel, Michael; Ferber, Matthew

    2017-09-01

    Self-forgiveness is often measured as a hedonic end-state, as the presence of positive affect and the absence of negative affect towards the self following a wrongdoing. However, self-forgiveness is also referred to as a difficult process. Self-forgiveness as a process of accepting responsibility and working through one's wrongdoing is a substantially un-hedonic - it is likely to be uncomfortable and at times painful. In this study, we examine two pathways to self-forgiveness: a hedonic focused pathway (via self-compassion) and a eudaimonic pathway (via reaffirmation of transgressed values). Across two studies, the data suggest that following interpersonal transgressions, self-compassion reduces self-punitiveness and increases end-state self-forgiveness (Study 1) via a reduction in perceived stigma (Study 2). In contrast, value reaffirmation increases the process of genuine self-forgiveness and reduces defensiveness (Study 1) via increased concern for shared group values (Study 2), in turn increasing desire to reconcile (Study 1), and amend-making and end-state self-forgiveness 1 week following the intervention (Study 2). The results suggest that both pathways can lead to self-forgiveness; however, following a transgression, self-forgiveness via a eudaimonic pathway offers greater promise for meeting the needs of both offenders and victims. © 2017 The British Psychological Society.

  8. Document Models

    Directory of Open Access Journals (Sweden)

    A.A. Malykh

    2017-08-01

    Full Text Available In this paper, the concept of locally simple models is considered. Locally simple models are arbitrarily complex models built from relatively simple components. A lot of practically important domains of discourse can be described as locally simple models, for example, business models of enterprises and companies. Up to now, research in human reasoning automation has been mainly concentrated around the most intellectually intensive activities, such as automated theorem proving. On the other hand, the retailer business model is formed from ”jobs”, and each ”job” can be modelled and automated more or less easily. At the same time, the whole retailer model as an integrated system is extremely complex. In this paper, we offer a variant of the mathematical definition of a locally simple model. This definition is intended for modelling a wide range of domains. Therefore, we also must take into account the perceptual and psychological issues. Logic is elitist, and if we want to attract to our models as many people as possible, we need to hide this elitism behind some metaphor, to which ’ordinary’ people are accustomed. As such a metaphor, we use the concept of a document, so our locally simple models are called document models. Document models are built in the paradigm of semantic programming. This allows us to achieve another important goal - to make the documentary models executable. Executable models are models that can act as practical information systems in the described domain of discourse. Thus, if our model is executable, then programming becomes redundant. The direct use of a model, instead of its programming coding, brings important advantages, for example, a drastic cost reduction for development and maintenance. Moreover, since the model is well and sound, and not dissolved within programming modules, we can directly apply AI tools, in particular, machine learning. This significantly expands the possibilities for automation and

  9. Securing XML Documents

    Directory of Open Access Journals (Sweden)

    Charles Shoniregun

    2004-11-01

    Full Text Available XML (extensible markup language is becoming the current standard for establishing interoperability on the Web. XML data are self-descriptive and syntax-extensible; this makes it very suitable for representation and exchange of semi-structured data, and allows users to define new elements for their specific applications. As a result, the number of documents incorporating this standard is continuously increasing over the Web. The processing of XML documents may require a traversal of all document structure and therefore, the cost could be very high. A strong demand for a means of efficient and effective XML processing has posed a new challenge for the database world. This paper discusses a fast and efficient indexing technique for XML documents, and introduces the XML graph numbering scheme. It can be used for indexing and securing graph structure of XML documents. This technique provides an efficient method to speed up XML data processing. Furthermore, the paper explores the classification of existing methods impact of query processing, and indexing.

  10. Orbitmpi Documentation

    International Nuclear Information System (INIS)

    Lowe, Lisa L.

    2000-01-01

    Orbitmpi is a parallelized version of Roscoe White's Orbit code. The code has been parallelized using MPI, which makes it portable to many types of machines. The guidelines used for the parallelization were to increase code performance with minimal changes to the code's original structure. This document gives a general description of how the parallel sections of the code run. It discusses the changes made to the original code and comments on the general procedure for future additions to Orbitmpi, as well as describing the effects of a parallelized random number generator on the code's output. Finally, the scaling results from Hecate and from Puffin are presented. Hecate is a 64-processor Origin 2000 machine, with MIPS R12000 processors and 16GB of memory, and Puffin is a PC cluster with 9 dual-processor 450 MHz Pentium III (18 processors max.), with 100Mbits ethernet communication

  11. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the ICMS Web site. The following items can be found on: http://cms.cern.ch/iCMS Management – CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. Management – CB – MB – FB Agendas and minutes are accessible to CMS members through Indico. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2008 Annual Reviews are posted in Indico. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral student upon completion of their theses.  Therefore it is requested that Ph.D students inform the CMS Secretariat about the nature of employment and name of their first employer. The Notes, Conference Reports and Theses published si...

  12. Omega documentation

    Energy Technology Data Exchange (ETDEWEB)

    Howerton, R.J.; Dye, R.E.; Giles, P.C.; Kimlinger, J.R.; Perkins, S.T.; Plechaty, E.F.

    1983-08-01

    OMEGA is a CRAY I computer program that controls nine codes used by LLNL Physical Data Group for: 1) updating the libraries of evaluated data maintained by the group (UPDATE); 2) calculating average values of energy deposited in secondary particles and residual nuclei (ENDEP); 3) checking the libraries for internal consistency, especially for energy conservation (GAMCHK); 4) producing listings, indexes and plots of the library data (UTILITY); 5) producing calculational constants such as group averaged cross sections and transfer matrices for diffusion and Sn transport codes (CLYDE); 6) producing and updating standard files of the calculational constants used by LLNL Sn and diffusion transport codes (NDFL); 7) producing calculational constants for Monte Carlo transport codes that use group-averaged cross sections and continuous energy for particles (CTART); 8) producing and updating standard files used by the LLNL Monte Carlo transport codes (TRTL); and 9) producing standard files used by the LANL pointwise Monte Carlo transport code MCNP (MCPOINT). The first four of these functions and codes deal with the libraries of evaluated data and the last five with various aspects of producing calculational constants for use by transport codes. In 1970 a series, called PD memos, of internal and informal memoranda was begun. These were intended to be circulated among the group for comment and then to provide documentation for later reference whenever questions arose about the subject matter of the memos. They have served this purpose and now will be drawn upon as source material for this more comprehensive report that deals with most of the matters covered in those memos.

  13. Omega documentation

    International Nuclear Information System (INIS)

    Howerton, R.J.; Dye, R.E.; Giles, P.C.; Kimlinger, J.R.; Perkins, S.T.; Plechaty, E.F.

    1983-08-01

    OMEGA is a CRAY I computer program that controls nine codes used by LLNL Physical Data Group for: 1) updating the libraries of evaluated data maintained by the group (UPDATE); 2) calculating average values of energy deposited in secondary particles and residual nuclei (ENDEP); 3) checking the libraries for internal consistency, especially for energy conservation (GAMCHK); 4) producing listings, indexes and plots of the library data (UTILITY); 5) producing calculational constants such as group averaged cross sections and transfer matrices for diffusion and Sn transport codes (CLYDE); 6) producing and updating standard files of the calculational constants used by LLNL Sn and diffusion transport codes (NDFL); 7) producing calculational constants for Monte Carlo transport codes that use group-averaged cross sections and continuous energy for particles (CTART); 8) producing and updating standard files used by the LLNL Monte Carlo transport codes (TRTL); and 9) producing standard files used by the LANL pointwise Monte Carlo transport code MCNP (MCPOINT). The first four of these functions and codes deal with the libraries of evaluated data and the last five with various aspects of producing calculational constants for use by transport codes. In 1970 a series, called PD memos, of internal and informal memoranda was begun. These were intended to be circulated among the group for comment and then to provide documentation for later reference whenever questions arose about the subject matter of the memos. They have served this purpose and now will be drawn upon as source material for this more comprehensive report that deals with most of the matters covered in those memos

  14. 17 CFR 230.411 - Incorporation by reference.

    Science.gov (United States)

    2010-04-01

    ... following provisions: (1) Non-financial information may be incorporated by reference to any document; (2) Financial information may be incorporated by reference to any document, provided any financial statement so incorporated meets the requirements of the forms on which the statement is filed. Financial statements or other...

  15. Peaceful use agenda at the 2015 NPT review conference. Reaffirming grand bargain and north-south agenda

    International Nuclear Information System (INIS)

    Akiyama, Nobumasa

    2016-01-01

    The 2015 Nuclear Non-Proliferation Treaty (NPT) Review Conference was judged as having two highlights: one was that the conflict between the United States and Middle East on the 'Middle East zone free of nuclear weapons and all other weapons of mass destruction' brought about a failure in the adoption of the final document, and the other was that the discussions over nuclear disarmament livened up in the climax of debate over the inhumanity of nuclear arms. On the other hand, among the first NPT Review Conference after the Fukushima nuclear accident, the peaceful uses of nuclear energy did not attract a great attention. However, the importance of the structure of Grand Bargain' among the three pillars of NPT such as nuclear disarmament, nuclear non-proliferation, and peaceful uses of nuclear energy was once again recognized. In addition, it was shown that the peaceful uses in the non-power generation field is important from the viewpoint of maintaining the involvement in NPT of the countries that do not necessarily use a large-scale of nuclear energy, such as developing countries. In the future, the importance of the peaceful uses of nuclear energy will increase from the viewpoints of its relationship between the development field and the equality between the developing and developed countries. (A.O.)

  16. 75 FR 72761 - Production Measurement Documents Incorporated by Reference

    Science.gov (United States)

    2010-11-26

    ...; January 2003: This standard contains information for computation of speed of sound in natural gas and other related hydrocarbon gases. Procedures are included for computation of several related gas... technologies for operations on the OCS. (4) This proposed rule would raise novel, legal, or policy issues...

  17. 77 FR 18916 - Production Measurement Documents Incorporated by Reference

    Science.gov (United States)

    2012-03-29

    ... standard contains information for computation of the speed of sound in natural gas and other related hydrocarbon gases. Procedures are included for computation of several related gas properties, including heat... recipients. (4) Will not raise novel, legal, or policy issues arising out of legal mandates, the President's...

  18. 30 CFR 250.198 - Documents incorporated by reference.

    Science.gov (United States)

    2010-07-01

    ... Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method, Second... Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer, Second Edition, March 2003...

  19. Wind system documentation

    Energy Technology Data Exchange (ETDEWEB)

    Froggatt, J.R.; Tatum, C.P.

    1993-01-15

    Atmospheric transport and diffusion models have been developed by the Environmental Technology Section (ETS) of the Savannah River Technology Center to calculate the location and concentration of toxic or radioactive materials during an accidental release at the Savannah River Site (SRS). The output from these models has been used to support initial on-site and off-site emergency response activities such as protective action decision making and field monitoring coordination. These atmospheric transport and diffusion models have been incorporated into an automated computer-based system called the (Weather Information and Display) System and linked to real-time meteorological and radiological monitoring instruments to provide timely information for these emergency response activities (Hunter, 1990). This report documents various aspects of the WIND system.

  20. Multimodal document management in radiotherapy

    International Nuclear Information System (INIS)

    Fahrner, H.; Kirrmann, S.; Roehner, F.; Schmucker, M.; Hall, M.; Heinemann, F.

    2013-01-01

    Background and purpose: After incorporating treatment planning and the organisational model of treatment planning in the operating schedule system (BAS, 'Betriebsablaufsystem'), complete document qualities were embedded in the digital environment. The aim of this project was to integrate all documents independent of their source (paper-bound or digital) and to make content from the BAS available in a structured manner. As many workflow steps as possible should be automated, e.g. assigning a document to a patient in the BAS. Additionally it must be guaranteed that at all times it could be traced who, when, how and from which source documents were imported into the departmental system. Furthermore work procedures should be changed that the documentation conducted either directly in the departmental system or from external systems can be incorporated digitally and paper document can be completely avoided (e.g. documents such as treatment certificate, treatment plans or documentation). It was a further aim, if possible, to automate the removal of paper documents from the departmental work flow, or even to make such paper documents superfluous. In this way patient letters for follow-up appointments should automatically generated from the BAS. Similarly patient record extracts in the form of PDF files should be enabled, e.g. for controlling purposes. Method: The available document qualities were analysed in detail by a multidisciplinary working group (BAS-AG) and after this examination and assessment of the possibility of modelling in our departmental workflow (BAS) they were transcribed into a flow diagram. The gathered specifications were implemented in a test environment by the clinical and administrative IT group of the department of radiation oncology and subsequent to a detailed analysis introduced into clinical routine. Results: The department has succeeded under the conditions of the aforementioned criteria to embed all relevant documents in the departmental

  1. Incorporating travel time reliability into the Highway Capacity Manual.

    Science.gov (United States)

    2014-01-01

    This final report documents the activities performed during SHRP 2 Reliability Project L08: Incorporating Travel Time Reliability into the Highway Capacity Manual. It serves as a supplement to the proposed chapters for incorporating travel time relia...

  2. Reaffirmed limitations of meta-analytic methods in the study of mild traumatic brain injury: a response to Rohling et al.

    Science.gov (United States)

    Bigler, Erin D; Farrer, Thomas J; Pertab, Jon L; James, Kelly; Petrie, Jo Ann; Hedges, Dawson W

    2013-01-01

    In 2009 Pertab, James, and Bigler published a critique of two prior meta-analyses by Binder, Rohling, and Larrabee (1997) and Frencham, Fox, and Maybery (2005) that showed small effect size difference at least 3 months post-injury in individuals who had sustained a mild traumatic brain injury (mTBI). The Binder et al. and Frencham et al. meta-analyses have been widely cited as showing no lasting effect of mTBI. In their critique Pertab et al. (2009) point out many limitations of these two prior meta-analyses, demonstrating that depending on how inclusion/exclusion criteria were defined different meta-analytic findings occur, some supporting the persistence of neuropsychological impairments beyond 3 months. Rohling et al. (2011) have now critiqued Pertab et al. (2009). Herein we respond to the Rolling et al. (2011) critique reaffirming the original findings of Pertab et al. (2009), providing additional details concerning the flaws in prior meta-analytic mTBI studies and the effects on neuropsychological performance.

  3. AREVA 2009 reference document

    International Nuclear Information System (INIS)

    2009-01-01

    This Reference Document contains information on the AREVA group's objectives, prospects and development strategies. It contains information on the markets, market shares and competitive position of the AREVA group. This information provides an adequate picture of the size of these markets and of the AREVA group's competitive position. Content: 1 - Person responsible for the Reference Document and Attestation by the person responsible for the Reference Document; 2 - Statutory and Deputy Auditors; 3 - Selected financial information; 4 - Risks: Risk management and coverage, Legal risk, Industrial and environmental risk, Operating risk, Risk related to major projects, Liquidity and market risk, Other risk; 5 - Information about the issuer: History and development, Investments; 6 - Business overview: Markets for nuclear power and renewable energies, AREVA customers and suppliers, Overview and strategy of the group, Business divisions, Discontinued operations: AREVA Transmission and Distribution; 7 - Organizational structure; 8 - Property, plant and equipment: Principal sites of the AREVA group, Environmental issues that may affect the issuer's; 9 - Analysis of and comments on the group's financial position and performance: Overview, Financial position, Cash flow, Statement of financial position, Events subsequent to year-end closing for 2009; 10 - Capital Resources; 11 - Research and development programs, patents and licenses; 12 -trend information: Current situation, Financial objectives; 13 - Profit forecasts or estimates; 14 - Administrative, management and supervisory bodies and senior management; 15 - Compensation and benefits; 16 - Functioning of corporate bodies; 17 - Employees; 18 - Principal shareholders; 19 - Transactions with related parties: French state, CEA, EDF group; 20 - Financial information concerning assets, financial positions and financial performance; 21 - Additional information: Share capital, Certificate of incorporation and by-laws; 22 - Major

  4. EDUCATIVE ACTIONS TO CONTRIBUTE WITH THE PROFFESIONAL REAFFIRMATION OF THE STUDENTS OF THIRD YEAR IN ELECTROMEDICINE / ACCIONES EDUCATIVAS PARA CONTRIBUIR A LA REAFIRMACIÓN PROFESIONAL EN LOS ESTUDIANTES DE TERCER AÑO DE ELECTROMEDICINA

    Directory of Open Access Journals (Sweden)

    María Margarita Mercantete Sosa

    2011-10-01

    Full Text Available The elaboration of educative actions to develop the professional reaffirmation of the students of Electromedicine of the Medical University: “Dr. Mario Muñoz Monroy from Las Tunas”, is an investigation that emerged due to the lack of motivation for the selected measurement and towards the activities the referred institution carries out in order to solve the professional problems as well as the development of habits, skills, feelings and moral values. It is offered words of advice and indications for the procedures which professor should carry out in order to reaffirm the students´vocational motivation. As a result of these educative actions, the students have participated in activities of social impact in rural and urban communities.

  5. Generic safety documentation model

    International Nuclear Information System (INIS)

    Mahn, J.A.

    1994-04-01

    This document is intended to be a resource for preparers of safety documentation for Sandia National Laboratories, New Mexico facilities. It provides standardized discussions of some topics that are generic to most, if not all, Sandia/NM facilities safety documents. The material provides a ''core'' upon which to develop facility-specific safety documentation. The use of the information in this document will reduce the cost of safety document preparation and improve consistency of information

  6. Registration document 2005; Document de reference 2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This reference document of Gaz de France provides information and data on the Group activities in 2005: financial informations, business, activities, equipments factories and real estate, trade, capital, organization charts, employment, contracts and research programs. (A.L.B.)

  7. 2002 reference document; Document de reference 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This 2002 reference document of the group Areva, provides information on the society. Organized in seven chapters, it presents the persons responsible for the reference document and for auditing the financial statements, information pertaining to the transaction, general information on the company and share capital, information on company operation, changes and future prospects, assets, financial position, financial performance, information on company management and executive board and supervisory board, recent developments and future prospects. (A.L.B.)

  8. Waste management system requirements document

    International Nuclear Information System (INIS)

    1991-02-01

    This volume defines the top level requirements for the Mined Geologic Disposal System (MGDS). It is designed to be used in conjunction with Volume 1 of the WMSR, General System Requirements. It provides a functional description expanding the requirements allocated to the MGDS in Volume 1 and elaborates on each requirement by providing associated performance criteria as appropriate. Volumes 1 and 4 of the WMSR provide a minimum set of requirements that must be satisfied by the final MGDS design. This document sets forth specific requirements that must be fulfilled. It is not the intent or purpose of this top level document to describe how each requirement is to be satisfied in the final MGDS design. Each subsequent level of the technical document hierarchy must provide further guidance and definition as to how each of these requirements is to be implemented in the design. It is expected that each subsequent level of requirements will be significantly more detailed. Section 2 of this volume provides a functional description of the MGDS. Each function is addressed in terms of requirements, and performance criteria. Section 3 provides a list of controlling documents. Each document cited in a requirement of Chapter 2 is included in this list and is incorporated into this document as a requirement on the final system. The WMSR addresses only federal requirements (i.e., laws, regulations and DOE orders). State and local requirements are not addressed. However, it will be specifically noted at the potentially affected WMSR requirements that there could be additional or more stringent regulations imposed by a state or local requirements or administering agency over the cited federal requirements

  9. Web document engineering

    International Nuclear Information System (INIS)

    White, B.

    1996-05-01

    This tutorial provides an overview of several document engineering techniques which are applicable to the authoring of World Wide Web documents. It illustrates how pre-WWW hypertext research is applicable to the development of WWW information resources

  10. Enterprise Document Management

    Data.gov (United States)

    US Agency for International Development — The function of the operation is to provide e-Signature and document management support for Acquisition and Assisitance (A&A) documents including vouchers in...

  11. WIPP documentation plan

    International Nuclear Information System (INIS)

    Plung, D.L.; Montgomery, T.T.; Glasstetter, S.R.

    1986-01-01

    In support of the programs at the Waste Isolation Pilot Plant (WIPP), the Publications and Procedures Section developed a documentation plan that provides an integrated document hierarchy; further, this plan affords several unique features: 1) the format for procedures minimizes the writing responsibilities of the technical staff and maximizes use of the writing and editing staff; 2) review cycles have been structured to expedite the processing of documents; and 3) the numbers of documents needed to support the program have been appreciably reduced

  12. Documenting Employee Conduct

    Science.gov (United States)

    Dalton, Jason

    2009-01-01

    One of the best ways for a child care program to lose an employment-related lawsuit is failure to document the performance of its employees. Documentation of an employee's performance can provide evidence of an employment-related decision such as discipline, promotion, or discharge. When properly implemented, documentation of employee performance…

  13. Documents preparation and review

    International Nuclear Information System (INIS)

    1999-01-01

    Ignalina Safety Analysis Group takes active role in assisting regulatory body VATESI to prepare various regulatory documents and reviewing safety reports and other documentation presented by Ignalina NPP in the process of licensing of unit 1. The list of main documents prepared and reviewed is presented

  14. Starlink Document Styles

    Science.gov (United States)

    Lawden, M. D.

    This document describes the various styles which are recommended for Starlink documents. It also explains how to use the templates which are provided by Starlink to help authors create documents in a standard style. This paper is concerned mainly with conveying the ``look and feel" of the various styles of Starlink document rather than describing the technical details of how to produce them. Other Starlink papers give recommendations for the detailed aspects of document production, design, layout, and typography. The only style that is likely to be used by most Starlink authors is the Standard style.

  15. Subject (of documents)

    DEFF Research Database (Denmark)

    Hjørland, Birger

    2017-01-01

    This article presents and discuss the concept “subject” or subject matter (of documents) as it has been examined in library and information science (LIS) for more than 100 years. Different theoretical positions are outlined and it is found that the most important distinction is between document......-oriented views versus request-oriented views. The document-oriented view conceive subject as something inherent in documents, whereas the request-oriented view (or the policy based view) understand subject as an attribution made to documents in order to facilitate certain uses of them. Related concepts...

  16. Scheme Program Documentation Tools

    DEFF Research Database (Denmark)

    Nørmark, Kurt

    2004-01-01

    are separate and intended for different documentation purposes they are related to each other in several ways. Both tools are based on XML languages for tool setup and for documentation authoring. In addition, both tools rely on the LAML framework which---in a systematic way---makes an XML language available...... as named functions in Scheme. Finally, the Scheme Elucidator is able to integrate SchemeDoc resources as part of an internal documentation resource....

  17. Health physics documentation

    International Nuclear Information System (INIS)

    Stablein, G.

    1980-01-01

    When dealing with radioactive material the health physicist receives innumerable papers and documents within the fields of researching, prosecuting, organizing and justifying radiation protection. Some of these papers are requested by the health physicist and some are required by law. The scope, quantity and deposit periods of the health physics documentation at the Karlsruhe Nuclear Research Center are presented and rationalizing methods discussed. The aim of this documentation should be the application of physics to accident prevention, i.e. documentation should protect those concerned and not the health physicist. (H.K.)

  18. CAED Document Repository

    Data.gov (United States)

    U.S. Environmental Protection Agency — Compliance Assurance and Enforcement Division Document Repository (CAEDDOCRESP) provides internal and external access of Inspection Records, Enforcement Actions, and...

  19. CFO Payment Document Management

    Data.gov (United States)

    US Agency for International Development — Paperless management will enable the CFO to create, store, and access various financial documents electronically. This capability will reduce time looking for...

  20. IDC System Specification Document.

    Energy Technology Data Exchange (ETDEWEB)

    Clifford, David J.

    2014-12-01

    This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris

  1. INFCE plenary conference documents

    International Nuclear Information System (INIS)

    This document consists of the reports to the First INFCE Plenary Conference (November 1978) by the Working Groups a Plenary Conference of its actions and decisions, the Communique of the Final INFCE Plenary Conference (February 1980), and a list of all documents in the IAEA depository for INFCE

  2. Human Document Project

    NARCIS (Netherlands)

    de Vries, Jeroen; Abelmann, Leon; Manz, A; Elwenspoek, Michael Curt

    2012-01-01

    “The Human Document Project‿ is a project which tries to answer all of the questions related to preserving information about the human race for tens of generations of humans to come or maybe even for a future intelligence which can emerge in the coming thousands of years. This document mainly

  3. Reactive documentation system

    Science.gov (United States)

    Boehnlein, Thomas R.; Kramb, Victoria

    2018-04-01

    Proper formal documentation of computer acquired NDE experimental data generated during research is critical to the longevity and usefulness of the data. Without documentation describing how and why the data was acquired, NDE research teams lose capability such as their ability to generate new information from previously collected data or provide adequate information so that their work can be replicated by others seeking to validate their research. Despite the critical nature of this issue, NDE data is still being generated in research labs without appropriate documentation. By generating documentation in series with data, equal priority is given to both activities during the research process. One way to achieve this is to use a reactive documentation system (RDS). RDS prompts an operator to document the data as it is generated rather than relying on the operator to decide when and what to document. This paper discusses how such a system can be implemented in a dynamic environment made up of in-house and third party NDE data acquisition systems without creating additional burden on the operator. The reactive documentation approach presented here is agnostic enough that the principles can be applied to any operator controlled, computer based, data acquisition system.

  4. Documentation: Records and Reports.

    Science.gov (United States)

    Akers, Michael J

    2017-01-01

    This article deals with documentation to include the beginning of documentation, the requirements of Good Manufacturing Practice reports and records, and the steps that can be taken to minimize Good Manufacturing Practice documentation problems. It is important to remember that documentation for 503a compounding involves the Formulation Record, Compounding Record, Standard Operating Procedures, Safety Data Sheets, etc. For 503b outsourcing facilities, compliance with Current Good Manufacturing Practices is required, so this article is applicable to them. For 503a pharmacies, one can see the development and modification of Good Manufacturing Practice and even observe changes as they are occurring in 503a documentation requirements and anticipate that changes will probably continue to occur. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

  5. CNEA's quality system documentation

    International Nuclear Information System (INIS)

    Mazzini, M.M.; Garonis, O.H.

    1998-01-01

    Full text: To obtain an effective and coherent documentation system suitable for CNEA's Quality Management Program, we decided to organize the CNEA's quality documentation with : a- Level 1. Quality manual. b- Level 2. Procedures. c-Level 3. Qualities plans. d- Level 4: Instructions. e- Level 5. Records and other documents. The objective of this work is to present a standardization of the documentation of the CNEA's quality system of facilities, laboratories, services, and R and D activities. Considering the diversity of criteria and formats for elaboration the documentation by different departments, and since ultimately each of them generally includes the same quality management policy, we proposed the elaboration of a system in order to improve the documentation, avoiding unnecessary time wasting and costs. This will aloud each sector to focus on their specific documentation. The quality manuals of the atomic centers fulfill the rule 3.6.1 of the Nuclear Regulatory Authority, and the Safety Series 50-C/SG-Q of the International Atomic Energy Agency. They are designed by groups of competent and highly trained people of different departments. The normative procedures are elaborated with the same methodology as the quality manuals. The quality plans which describe the organizational structure of working group and the appropriate documentation, will asses the quality manuals of facilities, laboratories, services, and research and development activities of atomic centers. The responsibilities for approval of the normative documentation are assigned to the management in charge of the administration of economic and human resources in order to fulfill the institutional objectives. Another improvement aimed to eliminate unnecessary invaluable processes is the inclusion of all quality system's normative documentation in the CNEA intranet. (author) [es

  6. 30 CFR 77.403-2 - Incorporation by reference.

    Science.gov (United States)

    2010-07-01

    ... MINES Safeguards for Mechanical Equipment § 77.403-2 Incorporation by reference. In accordance with 5 U..., Engineering and Research Center, Denver, Colorado. SAE documents are available from the Society of Automotive...

  7. Embedding Term Similarity and Inverse Document Frequency into a Logical Model of Information Retrieval.

    Science.gov (United States)

    Losada, David E.; Barreiro, Alvaro

    2003-01-01

    Proposes an approach to incorporate term similarity and inverse document frequency into a logical model of information retrieval. Highlights include document representation and matching; incorporating term similarity into the measure of distance; new algorithms for implementation; inverse document frequency; and logical versus classical models of…

  8. TRANSPORTATION SYSTEM REQUIREMENTS DOCUMENT

    International Nuclear Information System (INIS)

    2004-01-01

    This document establishes the Transportation system requirements for the U.S. Department of Energy's (DOE's) Civilian Radioactive Waste Management System (CRWMS). These requirements are derived from the Civilian Radioactive Waste Management System Requirements Document (CRD). The Transportation System Requirements Document (TSRD) was developed in accordance with LP-3.1Q-OCRWM, Preparation, Review, and Approval of Office of National Transportation Level-2 Baseline Requirements. As illustrated in Figure 1, the TSRD forms a part of the DOE Office of Civilian Radioactive Waste Management (OCRWM) Technical Baseline

  9. Applications for electronic documents

    International Nuclear Information System (INIS)

    Beitel, G.A.

    1995-01-01

    This paper discusses the application of electronic media to documents, specifically Safety Analysis Reports (SARs), prepared for Environmental Restoration and Waste Management (ER ampersand WM) programs being conducted for the Department of Energy (DOE) at the Idaho National Engineering Laboratory (INEL). Efforts are underway to upgrade our document system using electronic format. To satisfy external requirements (DOE, State, and Federal), ER ampersand WM programs generate a complement of internal requirements documents including a SAR and Technical Safety Requirements along with procedures and training materials. Of interest, is the volume of information and the difficulty in handling it. A recently prepared ER ampersand WM SAR consists of 1,000 pages of text and graphics; supporting references add 10,000 pages. Other programmatic requirements documents consist of an estimated 5,000 pages plus references

  10. Informational system. Documents management

    Directory of Open Access Journals (Sweden)

    Vladut Iacob

    2009-12-01

    Full Text Available Productivity growing, as well as reducing of operational costs in a company can be achieved by adopting a document management solutions. Such application will allow management and structured and efficient transmission of information within the organization.

  11. Transportation System Requirements Document

    International Nuclear Information System (INIS)

    1993-09-01

    This Transportation System Requirements Document (Trans-SRD) describes the functions to be performed by and the technical requirements for the Transportation System to transport spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from Purchaser and Producer sites to a Civilian Radioactive Waste Management System (CRWMS) site, and between CRWMS sites. The purpose of this document is to define the system-level requirements for Transportation consistent with the CRWMS Requirement Document (CRD). These requirements include design and operations requirements to the extent they impact on the development of the physical segments of Transportation. The document also presents an overall description of Transportation, its functions, its segments, and the requirements allocated to the segments and the system-level interfaces with Transportation. The interface identification and description are published in the CRWMS Interface Specification

  12. Integrated Criteria Document Chromium

    NARCIS (Netherlands)

    Slooff W; Cleven RFMJ; Janus JA; van der Poel P; van Beelen P; Boumans LJM; Canton JH; Eerens HC; Krajnc EI; de Leeuw FAAM; Matthijsen AJCM; van de Meent D; van der Meulen A; Mohn GR; Wijland GC; de Bruijn PJ; van Keulen A; Verburgh JJ; van der Woerd KF

    1990-01-01

    Betreft de engelse versie van rapport 758701001
    Bij dit rapport behoort een appendix onder hetzelfde nummer getiteld: "Integrated Criteria Document Chromium: Effects" Auteurs: Janus JA; Krajnc EI
    (appendix: see 710401002A)

  13. NCDC Archive Documentation Manuals

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The National Climatic Data Center Tape Deck Documentation library is a collection of over 400 manuals describing NCDC's digital holdings (both historic and current)....

  14. Registration document 2005

    International Nuclear Information System (INIS)

    2005-01-01

    This reference document of Gaz de France provides information and data on the Group activities in 2005: financial informations, business, activities, equipments factories and real estate, trade, capital, organization charts, employment, contracts and research programs. (A.L.B.)

  15. 2002 reference document

    International Nuclear Information System (INIS)

    2002-01-01

    This 2002 reference document of the group Areva, provides information on the society. Organized in seven chapters, it presents the persons responsible for the reference document and for auditing the financial statements, information pertaining to the transaction, general information on the company and share capital, information on company operation, changes and future prospects, assets, financial position, financial performance, information on company management and executive board and supervisory board, recent developments and future prospects. (A.L.B.)

  16. 28 CFR 10.5 - Incorporation of papers previously filed.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Incorporation of papers previously filed... CARRYING ON ACTIVITIES WITHIN THE UNITED STATES Registration Statement § 10.5 Incorporation of papers previously filed. Papers and documents already filed with the Attorney General pursuant to the said act and...

  17. LCS Content Document Application

    Science.gov (United States)

    Hochstadt, Jake

    2011-01-01

    My project at KSC during my spring 2011 internship was to develop a Ruby on Rails application to manage Content Documents..A Content Document is a collection of documents and information that describes what software is installed on a Launch Control System Computer. It's important for us to make sure the tools we use everyday are secure, up-to-date, and properly licensed. Previously, keeping track of the information was done by Excel and Word files between different personnel. The goal of the new application is to be able to manage and access the Content Documents through a single database backed web application. Our LCS team will benefit greatly with this app. Admin's will be able to login securely to keep track and update the software installed on each computer in a timely manner. We also included exportability such as attaching additional documents that can be downloaded from the web application. The finished application will ease the process of managing Content Documents while streamlining the procedure. Ruby on Rails is a very powerful programming language and I am grateful to have the opportunity to build this application.

  18. Technical approach document

    International Nuclear Information System (INIS)

    1988-04-01

    This document describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement Remedial Action Plans (RAPs) and final designs that comply with EPS standards. This document is a revision to the original document. Major revisions were made to the sections in riprap selection and sizing, and ground-water; only minor revisions were made to the remainder of the document. The US Nuclear Regulatory Commission (NRC) has prepared a Standard Review Plan (NRC-SRP) which describes factors to be considered by the NRC in approving the RAP. Sections 3.0, 4.0, 5.0, and 7.0 of this document are arranged under the same headings as those used in the NRC-SRP. This approach is adopted in order to facilitate joint use of the documents. Section 2.0 (not included in the NRC-SRP) discusses design considerations; Section 3.0 describes surface-water hydrology and erosion control; Section 4.0 describes geotechnical aspects of pile design; Section 5.0 discusses the Alternate Site Selection Process; Section 6.0 deals with radiological issues (in particular, the design of the radon barrier); Section 7.0 discusses protection of groundwater resources; and Section 8.0 discusses site design criteria for the RAC

  19. Extractive Summarisation of Medical Documents

    Directory of Open Access Journals (Sweden)

    Abeed Sarker

    2012-09-01

    Full Text Available Background Evidence Based Medicine (EBM practice requires practitioners to extract evidence from published medical research when answering clinical queries. Due to the time-consuming nature of this practice, there is a strong motivation for systems that can automatically summarise medical documents and help practitioners find relevant information. Aim The aim of this work is to propose an automatic query-focused, extractive summarisation approach that selects informative sentences from medical documents. MethodWe use a corpus that is specifically designed for summarisation in the EBM domain. We use approximately half the corpus for deriving important statistics associated with the best possible extractive summaries. We take into account factors such as sentence position, length, sentence content, and the type of the query posed. Using the statistics from the first set, we evaluate our approach on a separate set. Evaluation of the qualities of the generated summaries is performed automatically using ROUGE, which is a popular tool for evaluating automatic summaries. Results Our summarisation approach outperforms all baselines (best baseline score: 0.1594; our score 0.1653. Further improvements are achieved when query types are taken into account. Conclusion The quality of extractive summarisation in the medical domain can be significantly improved by incorporating domain knowledge and statistics derived from a specialised corpus. Such techniques can therefore be applied for content selection in end-to-end summarisation systems.

  20. Incorporating Feminist Standpoint Theory

    DEFF Research Database (Denmark)

    Ahlström, Kristoffer

    2005-01-01

    As has been noted by Alvin Goldman, there are some very interesting similarities between his Veritistic Social Epistemology (VSE) and Sandra Harding’s Feminist Standpoint Theory (FST). In the present paper, it is argued that these similarities are so significant as to motivate an incorporation...

  1. Differentiating leucine incorporation of

    NARCIS (Netherlands)

    Yokokawa, T.; Sintes, E.; de Corte, D.; Olbrich, K.; Herndl, G.J.

    2012-01-01

    The abundance (based on catalyzed reporter deposition-fluorescence in situ hybrid ization, CARD-FISH) and leucine incorporation rates of Archaea and Bacteria were determined throughout the water column in the eastern Atlantic. Bacteria dominated throughout the water column, although their

  2. 49 CFR 237.155 - Documents and records.

    Science.gov (United States)

    2010-10-01

    ..., DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Documentation, Records, and Audits of Bridge Management Programs § 237.155 Documents and records. Each track owner required to implement a bridge management... protected by a security system that incorporates a user identity and password, or a comparable method, to...

  3. AREVA 2009 reference document; AREVA document de reference 2009

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    This Reference Document contains information on the AREVA group's objectives, prospects and development strategies. It contains information on the markets, market shares and competitive position of the AREVA group. This information provides an adequate picture of the size of these markets and of the AREVA group's competitive position. Content: 1 - Person responsible for the Reference Document and Attestation by the person responsible for the Reference Document; 2 - Statutory and Deputy Auditors; 3 - Selected financial information; 4 - Risks: Risk management and coverage, Legal risk, Industrial and environmental risk, Operating risk, Risk related to major projects, Liquidity and market risk, Other risk; 5 - Information about the issuer: History and development, Investments; 6 - Business overview: Markets for nuclear power and renewable energies, AREVA customers and suppliers, Overview and strategy of the group, Business divisions, Discontinued operations: AREVA Transmission and Distribution; 7 - Organizational structure; 8 - Property, plant and equipment: Principal sites of the AREVA group, Environmental issues that may affect the issuer's; 9 - Analysis of and comments on the group's financial position and performance: Overview, Financial position, Cash flow, Statement of financial position, Events subsequent to year-end closing for 2009; 10 - Capital Resources; 11 - Research and development programs, patents and licenses; 12 -trend information: Current situation, Financial objectives; 13 - Profit forecasts or estimates; 14 - Administrative, management and supervisory bodies and senior management; 15 - Compensation and benefits; 16 - Functioning of corporate bodies; 17 - Employees; 18 - Principal shareholders; 19 - Transactions with related parties: French state, CEA, EDF group; 20 - Financial information concerning assets, financial positions and financial performance; 21 - Additional information: Share capital, Certificate of incorporation and

  4. A Type System for Dynamic Web Documents

    DEFF Research Database (Denmark)

    Schwartzbach, Michael Ignatieff; Sandholm, Anders

    2000-01-01

    Many interactive Web services use the CGI interface for communication with clients. They will dynamically create HTML documents that are presented to the client who then resumes the interaction by submitting data through incorporated form fields. This protocol is difficult to statically type-chec...... system is based on a flow analysis of which we prove soundness. We present an efficient runtime implementation that respects the semantics of only well-typed programs. This work is fully implemented as part of the system for defining interactive Web services.......Many interactive Web services use the CGI interface for communication with clients. They will dynamically create HTML documents that are presented to the client who then resumes the interaction by submitting data through incorporated form fields. This protocol is difficult to statically type...

  5. Segmentation of complex document

    Directory of Open Access Journals (Sweden)

    Souad Oudjemia

    2014-06-01

    Full Text Available In this paper we present a method for segmentation of documents image with complex structure. This technique based on GLCM (Grey Level Co-occurrence Matrix used to segment this type of document in three regions namely, 'graphics', 'background' and 'text'. Very briefly, this method is to divide the document image, in block size chosen after a series of tests and then applying the co-occurrence matrix to each block in order to extract five textural parameters which are energy, entropy, the sum entropy, difference entropy and standard deviation. These parameters are then used to classify the image into three regions using the k-means algorithm; the last step of segmentation is obtained by grouping connected pixels. Two performance measurements are performed for both graphics and text zones; we have obtained a classification rate of 98.3% and a Misclassification rate of 1.79%.

  6. La Documentation photographique

    Directory of Open Access Journals (Sweden)

    Magali Hamm

    2009-03-01

    Full Text Available La Documentation photographique, revue destinée aux enseignants et étudiants en histoire-géographie, place l’image au cœur de sa ligne éditoriale. Afin de suivre les évolutions actuelles de la géographie, la collection propose une iconographie de plus en plus diversifiée : cartes, photographies, mais aussi caricatures, une de journal ou publicité, toutes étant considérées comme un document géographique à part entière. Car l’image peut se faire synthèse ; elle peut au contraire montrer les différentes facettes d’un objet ; souvent elle permet d’incarner des phénomènes géographiques. Associées à d’autres documents, les images aident les enseignants à initier leurs élèves à des raisonnements géographiques complexes. Mais pour apprendre à les lire, il est fondamental de les contextualiser, de les commenter et d’interroger leur rapport au réel.The Documentation photographique, magazine dedicated to teachers and students in History - Geography, places the image at the heart of its editorial line. In order to follow the evolutions of Geography, the collection presents a more and more diversified iconography: maps, photographs, but also drawings or advertisements, all this documents being considered as geographical ones. Because image can be a synthesis; on the contrary it can present the different facets of a same object; often it enables to portray geographical phenomena. Related to other documents, images assist the teachers in the students’ initiation to complex geographical reasoning. But in order to learn how to read them, it is fundamental to contextualize them, comment them and question their relations with reality.

  7. Customer Communication Document

    Science.gov (United States)

    2009-01-01

    This procedure communicates to the Customers of the Automation, Robotics and Simulation Division (AR&SD) Dynamics Systems Test Branch (DSTB) how to obtain services of the Six-Degrees-Of-Freedom Dynamic Test System (SDTS). The scope includes the major communication documents between the SDTS and its Customer. It established the initial communication and contact points as well as provides the initial documentation in electronic media for the customer. Contact the SDTS Manager (SM) for the names of numbers of the current contact points.

  8. Incorporating intelligence into structured radiology reports

    Science.gov (United States)

    Kahn, Charles E.

    2014-03-01

    The new standard for radiology reporting templates being developed through the Integrating the Healthcare Enterprise (IHE) and DICOM organizations defines the storage and exchange of reporting templates as Hypertext Markup Language version 5 (HTML5) documents. The use of HTML5 enables the incorporation of "dynamic HTML," in which documents can be altered in response to their content. HTML5 documents can employ JavaScript, the HTML Document Object Model (DOM), and external web services to create intelligent reporting templates. Several reporting templates were created to demonstrate the use of scripts to perform in-template calculations and decision support. For example, a template for adrenal CT was created to compute contrast washout percentage from input values of precontrast, dynamic postcontrast, and delayed adrenal nodule attenuation values; the washout value can used to classify an adrenal nodule as a benign cortical adenoma. Dynamic templates were developed to compute volumes and apply diagnostic criteria, such as those for determination of internal carotid artery stenosis. Although reporting systems need not use a web browser to render the templates or their contents, the use of JavaScript creates innumerable opportunities to construct highly sophisticated HTML5 reporting templates. This report demonstrates the ability to incorporate dynamic content to enhance the use of radiology reporting templates.

  9. Documents on Disarmament.

    Science.gov (United States)

    Arms Control and Disarmament Agency, Washington, DC.

    This publication, latest in a series of volumes issued annually since 1960, contains primary source documents on arms control and disarmament developments during 1969. The main chronological arrangement is supplemented by both chronological and topical lists of contents. Other reference aids include a subject/author index, and lists of…

  10. ROOT Reference Documentation

    CERN Document Server

    Fuakye, Eric Gyabeng

    2017-01-01

    A ROOT Reference Documentation has been implemented to generate all the lists of libraries needed for each ROOT class. Doxygen has no option to generate or add the lists of libraries for each ROOT class. Therefore shell scripting and a basic C++ program was employed to import the lists of libraries needed by each ROOT class.

  11. Client Oriented Management Documents.

    Science.gov (United States)

    Limaye, Mohan R.; Hightower, Rick

    Noting that accounting reports, including management advisory service (MAS) studies, reports on internal control, and tax memoranda, often appear rather dense and heavy in style--partly because of the legal environment's demand for careful expression and partly because such documents convey very complex information--this paper presents four…

  12. Using Primary Source Documents.

    Science.gov (United States)

    Mintz, Steven

    2003-01-01

    Explores the use of primary sources when teaching about U.S. slavery. Includes primary sources from the Gilder Lehrman Documents Collection (New York Historical Society) to teach about the role of slaves in the Revolutionary War, such as a proclamation from Lord Dunmore offering freedom to slaves who joined his army. (CMK)

  13. QA programme documentation

    International Nuclear Information System (INIS)

    Scheibelt, L.

    1980-01-01

    The present paper deals with the following topics: The need for a documented Q.A. program; Establishing a Q.A. program; Q.A. activities; Fundamental policies; Q.A. policies; Quality objectives Q.A. manual. (orig./RW)

  14. Student Problems with Documentation.

    Science.gov (United States)

    Freimer, Gloria R.; Perry, Margaret M.

    1986-01-01

    Interviews with faculty, a survey of 20 students, and examination of style manuals revealed that students are confused by inconsistencies in and multiplicity of styles when confronted with writing and documenting a research paper. Librarians are urged to teach various citation formats and work for adoption of standardization. (17 references) (EJS)

  15. Documentation of spectrom-41

    International Nuclear Information System (INIS)

    Svalstad, D.K.

    1989-01-01

    SPECTROM-41 is a finite element heat transfer computer program developed to analyze thermal problems related to nuclear waste disposal. The code is part of the SPECTROM (Special Purpose Engineering Codes for Thermal/ROck Mechanics) series of special purpose finite element programs that are continually being developed by RE/SPEC Inc. (RSI) to address the many unique formations. This document presents the theoretical basis for the mathematical model, the finite element formulation of the program, and a description of the input data for the program, along with details about program support and continuing documentation. The documentation is intended to satisfy the requirements and guidelines outlined in NUREG-0856. The principal component model used in the programs based on Fourier's law of conductance. Numerous program options provide the capability of considering various boundary conditions, material stratification and anisotropy, and time-dependent heat generation that are characteristic of problems involving the disposal of nuclear waste in geologic formation. Numerous verification problems are included in the documentation in addition to highlights of past and ongoing verification and validation efforts. A typical repository problem is solving using SPECTROM-41 to demonstrate the use of the program in addressing problems related to the disposal of nuclear waste

  16. Text document classification

    Czech Academy of Sciences Publication Activity Database

    Novovičová, Jana

    č. 62 (2005), s. 53-54 ISSN 0926-4981 R&D Projects: GA AV ČR IAA2075302; GA AV ČR KSK1019101; GA MŠk 1M0572 Institutional research plan: CEZ:AV0Z10750506 Keywords : document representation * categorization * classification Subject RIV: BD - Theory of Information

  17. Course documentation report

    DEFF Research Database (Denmark)

    Buus, Lillian; Bygholm, Ann; Walther, Tina Dyngby Lyng

    A documentation report on the three pedagogical courses developed during the MVU project period. The report describes the three processes taking departure in the structure and material avaiable at the virtual learning environment. Also the report describes the way the two of the courses developed...

  18. Extremely secure identification documents

    International Nuclear Information System (INIS)

    Tolk, K.M.; Bell, M.

    1997-09-01

    The technology developed in this project uses biometric information printed on the document and public key cryptography to ensure that an adversary cannot issue identification documents to unauthorized individuals or alter existing documents to allow their use by unauthorized individuals. This process can be used to produce many types of identification documents with much higher security than any currently in use. The system is demonstrated using a security badge as an example. This project focused on the technologies requiring development in order to make the approach viable with existing badge printing and laminating technologies. By far the most difficult was the image processing required to verify that the picture on the badge had not been altered. Another area that required considerable work was the high density printed data storage required to get sufficient data on the badge for verification of the picture. The image processing process was successfully tested, and recommendations are included to refine the badge system to ensure high reliability. A two dimensional data array suitable for printing the required data on the badge was proposed, but testing of the readability of the array had to be abandoned due to reallocation of the budgeted funds by the LDRD office

  19. Documents and legal texts

    International Nuclear Information System (INIS)

    2017-01-01

    This section treats of the following documents and legal texts: 1 - Belgium 29 June 2014 - Act amending the Act of 22 July 1985 on Third-Party Liability in the Field of Nuclear Energy; 2 - Belgium, 7 December 2016. - Act amending the Act of 22 July 1985 on Third-Party Liability in the Field of Nuclear Energy

  20. Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture

    Science.gov (United States)

    Sanfilippo, Antonio [Richland, WA; Calapristi, Augustin J [West Richland, WA; Crow, Vernon L [Richland, WA; Hetzler, Elizabeth G [Kennewick, WA; Turner, Alan E [Kennewick, WA

    2009-12-22

    Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture are described. In one aspect, a document clustering method includes providing a document set comprising a plurality of documents, providing a cluster comprising a subset of the documents of the document set, using a plurality of terms of the documents, providing a cluster label indicative of subject matter content of the documents of the cluster, wherein the cluster label comprises a plurality of word senses, and selecting one of the word senses of the cluster label.

  1. Technical approach document

    International Nuclear Information System (INIS)

    1989-12-01

    The Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law 95-604 (PL95-604), grants the Secretary of Energy the authority and responsibility to perform such actions as are necessary to minimize radiation health hazards and other environmental hazards caused by inactive uranium mill sites. This Technical Approach Document (TAD) describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement remedial action plans (RAPS) and final designs that comply with EPA standards. It does not address the technical approaches necessary for aquifer restoration at processing sites; a guidance document, currently in preparation, will describe aquifer restoration concerns and technical protocols. This document is a second revision to the original document issued in May 1986; the revision has been made in response to changes to the groundwater standards of 40 CFR 192, Subparts A--C, proposed by EPA as draft standards. New sections were added to define the design approaches and designs necessary to comply with the groundwater standards. These new sections are in addition to changes made throughout the document to reflect current procedures, especially in cover design, water resources protection, and alternate site selection; only minor revisions were made to some of the sections. Sections 3.0 is a new section defining the approach taken in the design of disposal cells; Section 4.0 has been revised to include design of vegetated covers; Section 8.0 discusses design approaches necessary for compliance with the groundwater standards; and Section 9.0 is a new section dealing with nonradiological hazardous constituents. 203 refs., 18 figs., 26 tabs

  2. Prototype Hanford Surface Barrier: Design basis document

    International Nuclear Information System (INIS)

    Myers, D.R.; Duranceau, D.A.

    1994-11-01

    The Hanford Site Surface Barrier Development Program (BDP) was organized in 1985 to develop the technology needed to provide a long-term surface barrier capability for the Hanford Site and other arid sites. This document provides the basis of the prototype barrier. Engineers and scientists have momentarily frozen evolving barrier designs and incorporated the latest findings from BDP tasks. The design and construction of the prototype barrier has required that all of the various components of the barrier be brought together into an integrated system. This integration is particularly important because some of the components of the protective barreir have been developed independently of other barreir components. This document serves as the baseline by which future modifications or other barrier designs can be compared. Also, this document contains the minutes of meeting convened during the definitive design process in which critical decisions affecting the prototype barrier's design were made and the construction drawings

  3. Areva - 2011 Reference document

    International Nuclear Information System (INIS)

    2011-01-01

    After having indicated the person responsible of this document and the legal account auditors, and provided some financial information, this document gives an overview of the different risk factors existing in the company: law risks, industrial and environmental risks, operational risks, risks related to large projects, market and liquidity risks. Then, after having recalled the history and evolution of the company and the evolution of its investments over the last five years, it proposes an overview of Areva's activities on the markets of nuclear energy and renewable energies, of its clients and suppliers, of its strategy, of the activities of its different departments. Other information are provided: company's flow chart, estate properties (plants, equipment), an analysis of its financial situation, its research and development policy, the present context, profit previsions or estimations, management organization and operation

  4. Documentation of Concurrent programs.

    Science.gov (United States)

    1983-07-01

    preparing the documentation formats, and Tom McDonald for preparing the supplemental materials and statistical analyses. 16 [ 1 -16- I j REFERENCES I Boehm...34*h (eeeeeotop to enter h, to IAmlOCSot land ,uoMXM to R&’T- kfC ’Cod At 1*1 ,lgo: 0) 4 O ~ en ttR .I SA’ tgOhegl that ’t to 40n. .hi &ren a ~ O toll s

  5. SANSMIC design document.

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Paula D. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Rudeen, David Keith [GRAM, Inc., Albuquerque, NM (United States)

    2015-07-01

    The United States Strategic Petroleum Reserve (SPR) maintains an underground storage system consisting of caverns that were leached or solution mined in four salt domes located near the Gulf of Mexico in Texas and Louisiana. The SPR comprises more than 60 active caverns containing approximately 700 million barrels of crude oil. Sandia National Labo- ratories (SNL) is the geotechnical advisor to the SPR. As the most pressing need at the inception of the SPR was to create and fill storage volume with oil, the decision was made to leach the caverns and fill them simultaneously (leach-fill). Therefore, A.J. Russo developed SANSMIC in the early 1980s which allows for a transient oil-brine interface (OBI) making it possible to model leach-fill and withdrawal operations. As the majority of caverns are currently filled to storage capacity, the primary uses of SANSMIC at this time are related to the effects of small and large withdrawals, expansion of existing caverns, and projecting future pillar to diameter ratios. SANSMIC was identified by SNL as a priority candidate for qualification. This report continues the quality assurance (QA) process by documenting the "as built" mathematical and numerical models that comprise this document. The pro- gram flow is outlined and the models are discussed in detail. Code features that were added later or were not documented previously have been expounded. No changes in the code's physics have occurred since the original documentation (Russo, 1981, 1983) although recent experiments may yield improvements to the temperature and plume methods in the future.

  6. Electronic Braille Document Reader

    OpenAIRE

    Arif, Shahab; Holmes, Violeta

    2013-01-01

    This paper presents an investigation into developing a portable Braille device which would allow visually impaired individuals to read electronic documents by actuating Braille text on a finger. Braille books tend to be bulky in size due to the minimum size requirements for each Braille cell. E-books can be read in Braille using refreshable Braille displays connected to a computer. However, the refreshable Braille displays are expensive, bulky and are not portable. These factors restrict blin...

  7. Electronic Braille Document Reader

    OpenAIRE

    Arif, S.

    2012-01-01

    An investigation was conducted into developing a portable Braille device which would allow visually impaired individuals to read electronic documents by actuating Braille text on a finger. Braille books tend to be bulky in size due to the minimum size requirements for each Braille cell. E-books can be read in Braille using refreshable Braille displays connected to a computer. However, the refreshable Braille displays are expensive, bulky and are not portable. These factors restrict blind and ...

  8. SGHWR - quality assurance documentation

    International Nuclear Information System (INIS)

    Garrard, R.S.; Caulfield, J.

    1976-01-01

    The quality assurance program for a modern power station such as an SGHWR type reactor plant must include a record of quality achievement. The case history record which is evidence of the actual quality of the plant and is a data bank of design, manufacture, and results of inspections and tests, is described. Documentation distribution, which keeps all key areas informed of plant item quality status, and the retrieval and storage of information, are briefly discussed. (U.K.)

  9. AUDIT plan documenting method

    International Nuclear Information System (INIS)

    Cornecsu, M.

    1995-01-01

    The work describes a method of documenting the AUDIT plan upon the basis of two quantitative elements resulting from quality assurance program appraisal system function implementation degree as established from the latest AUDIT performed an system function weight in QAP, respectively, appraised by taking into account their significance for the activities that are to be performed in the period for which the AUDITs are planned. (Author) 3 Figs., 2 Refs

  10. AREVA - 2013 Reference document

    International Nuclear Information System (INIS)

    2014-01-01

    This Reference Document contains information on the AREVA group's objectives, prospects and development strategies, as well as estimates of the markets, market shares and competitive position of the AREVA group. Content: 1 - Person responsible for the Reference Document; 2 - Statutory auditors; 3 - Selected financial information; 4 - Description of major risks confronting the company; 5 - Information about the issuer; 6 - Business overview; 7 - Organizational structure; 8 - Property, plant and equipment; 9 - Situation and activities of the company and its subsidiaries; 10 - Capital resources; 11 - Research and development programs, patents and licenses; 12 - Trend information; 13 - Profit forecasts or estimates; 14 - Management and supervisory bodies; 15 - Compensation and benefits; 16 - Functioning of the management and supervisory bodies; 17 - Human resources information; 18 - Principal shareholders; 19 - Transactions with related parties; 20 - Financial information concerning assets, financial positions and financial performance; 21 - Additional information; 22 - Major contracts; 23 - Third party information, statements by experts and declarations of interest; 24 - Documents on display; 25 - Information on holdings; Appendix 1: report of the supervisory board chairman on the preparation and organization of the board's activities and internal control procedures; Appendix 2: statutory auditors' reports; Appendix 3: environmental report; Appendix 4: non-financial reporting methodology and independent third-party report on social, environmental and societal data; Appendix 5: ordinary and extraordinary general shareholders' meeting; Appendix 6: values charter; Appendix 7: table of concordance of the management report; glossaries

  11. Content Documents Management

    Science.gov (United States)

    Muniz, R.; Hochstadt, J.; Boelke J.; Dalton, A.

    2011-01-01

    The Content Documents are created and managed under the System Software group with. Launch Control System (LCS) project. The System Software product group is lead by NASA Engineering Control and Data Systems branch (NEC3) at Kennedy Space Center. The team is working on creating Operating System Images (OSI) for different platforms (i.e. AIX, Linux, Solaris and Windows). Before the OSI can be created, the team must create a Content Document which provides the information of a workstation or server, with the list of all the software that is to be installed on it and also the set where the hardware belongs. This can be for example in the LDS, the ADS or the FR-l. The objective of this project is to create a User Interface Web application that can manage the information of the Content Documents, with all the correct validations and filters for administrator purposes. For this project we used one of the most excellent tools in agile development applications called Ruby on Rails. This tool helps pragmatic programmers develop Web applications with Rails framework and Ruby programming language. It is very amazing to see how a student can learn about OOP features with the Ruby language, manage the user interface with HTML and CSS, create associations and queries with gems, manage databases and run a server with MYSQL, run shell commands with command prompt and create Web frameworks with Rails. All of this in a real world project and in just fifteen weeks!

  12. Toward Documentation of Program Evolution

    DEFF Research Database (Denmark)

    Vestdam, Thomas; Nørmark, Kurt

    2005-01-01

    The documentation of a program often falls behind the evolution of the program source files. When this happens it may be attractive to shift the documentation mode from updating the documentation to documenting the evolution of the program. This paper describes tools that support the documentatio....... It is concluded that our approach can help revitalize older documentation, and that discovery of the fine grained program evolution steps help the programmer in documenting the evolution of the program....

  13. Consumer Vehicle Choice Model Documentation

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Changzheng [ORNL; Greene, David L [ORNL

    2012-08-01

    In response to the Fuel Economy and Greenhouse Gas (GHG) emissions standards, automobile manufacturers will need to adopt new technologies to improve the fuel economy of their vehicles and to reduce the overall GHG emissions of their fleets. The U.S. Environmental Protection Agency (EPA) has developed the Optimization Model for reducing GHGs from Automobiles (OMEGA) to estimate the costs and benefits of meeting GHG emission standards through different technology packages. However, the model does not simulate the impact that increased technology costs will have on vehicle sales or on consumer surplus. As the model documentation states, “While OMEGA incorporates functions which generally minimize the cost of meeting a specified carbon dioxide (CO2) target, it is not an economic simulation model which adjusts vehicle sales in response to the cost of the technology added to each vehicle.” Changes in the mix of vehicles sold, caused by the costs and benefits of added fuel economy technologies, could make it easier or more difficult for manufacturers to meet fuel economy and emissions standards, and impacts on consumer surplus could raise the costs or augment the benefits of the standards. Because the OMEGA model does not presently estimate such impacts, the EPA is investigating the feasibility of developing an adjunct to the OMEGA model to make such estimates. This project is an effort to develop and test a candidate model. The project statement of work spells out the key functional requirements for the new model.

  14. Viviendo el documental

    OpenAIRE

    Álvarez Moreno, Víctor

    2017-01-01

    En el siguiente trabajo se recoge el proceso de realización y elaboración de un documental en 360 grados sobre la catedral de Valladolid bajo el título Reconstruyendo la catedral. El trabajo une realidad virtual con narrativa periodística. La realidad virtual es una herramienta que permite transformar al espectador en un testigo de la historia. En este caso, se muestra lo que pudo ser la catedral de Valladolid, cuyo objetivo era convertirse en la catedral más grande del territorio europeo. ...

  15. Documents and legal texts

    International Nuclear Information System (INIS)

    2016-01-01

    This section treats of the following documents and legal texts: 1 - Brazil: Law No. 13,260 of 16 March 2016 (To regulate the provisions of item XLIII of Article 5 of the Federal Constitution on terrorism, dealing with investigative and procedural provisions and redefining the concept of a terrorist organisation; and amends Laws No. 7,960 of 21 December 1989 and No. 12,850 of 2 August 2013); 2 - India: The Atomic Energy (Amendment) Act, 2015; Department Of Atomic Energy Notification (Civil Liability for Nuclear Damage); 3 - Japan: Act on Subsidisation, etc. for Nuclear Damage Compensation Funds following the implementation of the Convention on Supplementary Compensation for Nuclear Damage

  16. World energy projection system: Model documentation

    Science.gov (United States)

    1992-06-01

    The World Energy Project System (WEPS) is an accounting framework that incorporates projects from independently documented models and assumptions about the future energy intensity of economic activity (ratios of total energy consumption divided by gross domestic product) and about the rate of incremental energy requirements met by hydropower, geothermal, coal, and natural gas to produce projections of world energy consumption published annually by the Energy Information Administration (EIA) in the International Energy Outlook (IEO). Two independently documented models presented in Figure 1, the Oil Market Simulation (OMS) model and the World Integrated Nuclear Evaluation System (WINES), provide projections of oil and nuclear power consumption published in the IEO. Output from a third independently documented model, and the International Coal Trade Model (ICTM), is not published in the IEO but is used in WEPS as a supply check on projections of world coal consumption produced by WEPS and published in the IEO. A WEPS model of natural gas production documented in this report provides the same type of implicit supply check on the WEPS projections of world natural gas consumption published in the IEO. Two additional models are included in Figure 1, the OPEC Capacity model and the Non-OPEC Oil Production model. These WEPS models provide inputs to the OMS model and are documented in this report.

  17. World energy projection system: Model documentation

    International Nuclear Information System (INIS)

    1992-06-01

    The World Energy Project System (WEPS) is an accounting framework that incorporates projects from independently documented models and assumptions about the future energy intensity of economic activity (ratios of total energy consumption divided by gross domestic product) and about the rate of incremental energy requirements met by hydropower, geothermal, coal, and natural gas to produce projections of world energy consumption published annually by the Energy Information Administration (EIA) in the International Energy Outlook (IEO) (Figure 1). Two independently documented models presented in Figure 1, the Oil Market Simulation (OMS) model and the World Integrated Nuclear Evaluation System (WINES) provide projections of oil and nuclear power consumption published in the IEO. Output from a third independently documented model, and the International Coal Trade Model (ICTM), is not published in the IEO but is used in WEPS as a supply check on projections of world coal consumption produced by WEPS and published in the IEO. A WEPS model of natural gas production documented in this report provides the same type of implicit supply check on the WEPS projections of world natural gas consumption published in the IEO. Two additional models are included in Figure 1, the OPEC Capacity model and the Non-OPEC Oil Production model. These WEPS models provide inputs to the OMS model and are documented in this report

  18. AREVA - 2012 Reference document

    International Nuclear Information System (INIS)

    2013-03-01

    After a presentation of the person responsible for this Reference Document, of statutory auditors, and of a summary of financial information, this report address the different risk factors: risk management and coverage, legal risk, industrial and environmental risk, operational risk, risk related to major projects, liquidity and market risk, and other risks (related to political and economic conditions, to Group's structure, and to human resources). The next parts propose information about the issuer, a business overview (markets for nuclear power and renewable energies, customers and suppliers, group's strategy, operations), a brief presentation of the organizational structure, a presentation of properties, plants and equipment (principal sites, environmental issues which may affect these items), analysis and comments on the group's financial position and performance, a presentation of capital resources, a presentation of research and development activities (programs, patents and licenses), a brief description of financial objectives and profit forecasts or estimates, a presentation of administration, management and supervision bodies, a description of the operation of corporate bodies, an overview of personnel, of principal shareholders, and of transactions with related parties, a more detailed presentation of financial information concerning assets, financial positions and financial performance. Addition information regarding share capital is given, as well as an indication of major contracts, third party information, available documents, and information on holdings

  19. AREVA 2010 Reference document

    International Nuclear Information System (INIS)

    2010-01-01

    After a presentation of the person responsible for this document, and of statutory auditors, this report proposes some selected financial information. Then, it addresses, presents and comments the different risk factors: risk management and coverage, legal risk, industrial and environmental risk, operational risk, risks related to major projects, liquidity and market risk, and other risk. Then, after a presentation of the issuer, it proposes a business overview (markets for nuclear and renewable energies, AREVA customers and suppliers, strategy, activities), a presentation of the organizational structure, a presentation of AREVA properties, plants and equipment (sites, environmental issues), an analysis and comment of the group's financial position and performance, a presentation of its capital resources, an overview of its research and development activities, programs, patents and licenses. It indicates profit forecast and estimates, presents the administrative, management and supervisory bodies, and compensation and benefits amounts, reports of the functioning of corporate bodies. It describes the human resource company policy, indicates the main shareholders and transactions with related parties. It proposes financial information concerning assets, financial positions and financial performance. This document contains its French and its English versions

  20. ExactPack Documentation

    Energy Technology Data Exchange (ETDEWEB)

    Singleton, Robert Jr. [Los Alamos National Laboratory; Israel, Daniel M. [Los Alamos National Laboratory; Doebling, Scott William [Los Alamos National Laboratory; Woods, Charles Nathan [Los Alamos National Laboratory; Kaul, Ann [Los Alamos National Laboratory; Walter, John William Jr [Los Alamos National Laboratory; Rogers, Michael Lloyd [Los Alamos National Laboratory

    2016-05-09

    For code verification, one compares the code output against known exact solutions. There are many standard test problems used in this capacity, such as the Noh and Sedov problems. ExactPack is a utility that integrates many of these exact solution codes into a common API (application program interface), and can be used as a stand-alone code or as a python package. ExactPack consists of python driver scripts that access a library of exact solutions written in Fortran or Python. The spatial profiles of the relevant physical quantities, such as the density, fluid velocity, sound speed, or internal energy, are returned at a time specified by the user. The solution profiles can be viewed and examined by a command line interface or a graphical user interface, and a number of analysis tools and unit tests are also provided. We have documented the physics of each problem in the solution library, and provided complete documentation on how to extend the library to include additional exact solutions. ExactPack’s code architecture makes it easy to extend the solution-code library to include additional exact solutions in a robust, reliable, and maintainable manner.

  1. Regulatory guidance document

    International Nuclear Information System (INIS)

    1994-05-01

    The Office of Civilian Radioactive Waste Management (OCRWM) Program Management System Manual requires preparation of the OCRWM Regulatory Guidance Document (RGD) that addresses licensing, environmental compliance, and safety and health compliance. The document provides: regulatory compliance policy; guidance to OCRWM organizational elements to ensure a consistent approach when complying with regulatory requirements; strategies to achieve policy objectives; organizational responsibilities for regulatory compliance; guidance with regard to Program compliance oversight; and guidance on the contents of a project-level Regulatory Compliance Plan. The scope of the RGD includes site suitability evaluation, licensing, environmental compliance, and safety and health compliance, in accordance with the direction provided by Section 4.6.3 of the PMS Manual. Site suitability evaluation and regulatory compliance during site characterization are significant activities, particularly with regard to the YW MSA. OCRWM's evaluation of whether the Yucca Mountain site is suitable for repository development must precede its submittal of a license application to the Nuclear Regulatory Commission (NRC). Accordingly, site suitability evaluation is discussed in Chapter 4, and the general statements of policy regarding site suitability evaluation are discussed in Section 2.1. Although much of the data and analyses may initially be similar, the licensing process is discussed separately in Chapter 5. Environmental compliance is discussed in Chapter 6. Safety and Health compliance is discussed in Chapter 7

  2. Areva - 2016 Reference document

    International Nuclear Information System (INIS)

    2017-01-01

    Areva supplies high added-value products and services to support the operation of the global nuclear fleet. The company is present throughout the entire nuclear cycle, from uranium mining to used fuel recycling, including nuclear reactor design and operating services. Areva is recognized by utilities around the world for its expertise, its skills in cutting-edge technologies and its dedication to the highest level of safety. Areva's 36,000 employees are helping build tomorrow's energy model: supplying ever safer, cleaner and more economical energy to the greatest number of people. This Reference Document contains information on Areva's objectives, prospects and development strategies. It contains estimates of the markets, market shares and competitive position of Areva

  3. Working document dispersion models

    International Nuclear Information System (INIS)

    Dop, H. van

    1988-01-01

    This report is a summary of the most important results from June 1985 of the collaboration of the RIVM (Dutch National Institute for Public Health and Environment Hygiene) and KNMI (Royal Dutch Meteorologic Institute) on the domain of dispersion models. It contains a short description of the actual SO x /NO x -model. Furthermore it contains recommendations for modifications of some numerical-mathematical aspects and an impulse to a more complete description of chemical processes in the atmosphere and the (wet) deposition process. A separate chapter is devoted to the preparation of meteorologic data which are relevant for dispersion as well as atmospheric chemistry and deposition. This report serves as working document for the final formulation of a acidifying- and oxidant-model. (H.W.). 69 refs.; 51 figs.; 13 tabs.; 3 schemes

  4. Integrated criteria document mercury

    International Nuclear Information System (INIS)

    Sloof, W.; Beelan, P. van; Annema, J.A.; Janus, J.A.

    1995-01-01

    The document contains a systematic review and a critical evaluation of the most relevant data on the priority substance mercury for the purpose of effect-oriented environmental policy. Chapter headings are: properties and existing standards; production, application, sources and emissions (natural sources, industry, energy, households, agriculture, dental use, waste); distribution and transformation (cinnabar; Hg 2+ , Hg 2 2+ , elemental mercury, methylmercury, behavior in soil, water, air, biota); concentrations and fluxes in the environment and exposure levels (sampling and measuring methods, occurrence in soil, water, air etc.); effects (toxicity to humans and aquatic and terrestrial systems); emissions reduction (from industrial sources, energy, waste processing etc.); and evaluation (risks, standards, emission reduction objectives, measuring strategies). 395 refs

  5. Gaia DR1 documentation

    Science.gov (United States)

    van Leeuwen, F.; de Bruijne, J. H. J.; Arenou, F.; Comoretto, G.; Eyer, L.; Farras Casas, M.; Hambly, N.; Hobbs, D.; Salgado, J.; Utrilla Molina, E.; Vogt, S.; van Leeuwen, M.; Abreu, A.; Altmann, M.; Andrei, A.; Babusiaux, C.; Bastian, U.; Biermann, M.; Blanco-Cuaresma, S.; Bombrun, A.; Borrachero, R.; Brown, A. G. A.; Busonero, D.; Busso, G.; Butkevich, A.; Cantat-Gaudin, T.; Carrasco, J. M.; Castañeda, J.; Charnas, J.; Cheek, N.; Clementini, G.; Crowley, C.; Cuypers, J.; Davidson, M.; De Angeli, F.; De Ridder, J.; Evans, D.; Fabricius, C.; Findeisen, K.; Fleitas, J. M.; Gracia, G.; Guerra, R.; Guy, L.; Helmi, A.; Hernandez, J.; Holl, B.; Hutton, A.; Klioner, S.; Lammers, U.; Lecoeur-Taïbi, I.; Lindegren, L.; Luri, X.; Marinoni, S.; Marrese, P.; Messineo, R.; Michalik, D.; Mignard, F.; Montegriffo, P.; Mora, A.; Mowlavi, N.; Nienartowicz, K.; Pancino, E.; Panem, C.; Portell, J.; Rimoldini, L.; Riva, A.; Robin, A.; Siddiqui, H.; Smart, R.; Sordo, R.; Soria, S.; Turon, C.; Vallenari, A.; Voss, H.

    2017-12-01

    94000 Hipparcos stars in the primary data set, the proper motion standard errors are much smaller, at about 0.06 mas yr^-1. For the secondary astrometric data set, the typical standard error on the positions is 10 mas. The median standard errors on the mean G-band magnitudes range from the milli-magnitude level to 0.03 mag over the magnitude range 5 to 20.7. The DPAC undertook an extensive validation of Gaia DR1 which confirmed that this data release represents a major advance in the mapping of the skies and the availability of basic stellar data that form the foundation of observational astrophysics. However, as a consequence of the very preliminary nature of this first Gaia data release, there are a number of important limitations to the data quality. These limitations are documented in the Astronomy & Astrophysics papers that accompany Gaia DR1, with further information provided in this documentation. The reader is strongly encouraged to read about these limitations and to carefully consider them before drawing conclusions from the data. This Gaia DR1 documentation complements the peer-reviewed papers that accompany the release in a Special Issue of Astronomy & Astrophysics. The papers form the primary documentation for the data release and they are frequently referenced throughout the text.

  6. Documents and legal texts

    International Nuclear Information System (INIS)

    2013-01-01

    This section reprints a selection of recently published legislative texts and documents: - Russian Federation: Federal Law No.170 of 21 November 1995 on the use of atomic energy, Adopted by the State Duma on 20 October 1995; - Uruguay: Law No.19.056 On the Radiological Protection and Safety of Persons, Property and the Environment (4 January 2013); - Japan: Third Supplement to Interim Guidelines on Determination of the Scope of Nuclear Damage resulting from the Accident at the Tokyo Electric Power Company Fukushima Daiichi and Daini Nuclear Power Plants (concerning Damages related to Rumour-Related Damage in the Agriculture, Forestry, Fishery and Food Industries), 30 January 2013; - France and the United States: Joint Statement on Liability for Nuclear Damage (Aug 2013); - Franco-Russian Nuclear Power Declaration (1 November 2013)

  7. ICRS Recommendation Document

    DEFF Research Database (Denmark)

    Roos, Ewa M.; Engelhart, Luella; Ranstam, Jonas

    2011-01-01

    and function evaluated for validity and psychometric properties in patients with articular cartilage lesions. Results: The knee-specific instruments, titled the International Knee Documentation Committee Subjective Knee Form and the Knee injury and Osteoarthritis and Outcome Score, both fulfill the basic......Abstract Objective: The purpose of this article is to describe and recommend patient-reported outcome instruments for use in patients with articular cartilage lesions undergoing cartilage repair interventions. Methods: Nonsystematic literature search identifying measures addressing pain...... constructs at all levels according to the International Classification of Functioning. Conclusions: Because there is no obvious superiority of either instrument at this time, both outcome measures are recommended for use in cartilage repair. Rescaling of the Lysholm Scoring Scale has been suggested...

  8. Areva, reference document 2006

    International Nuclear Information System (INIS)

    2006-01-01

    This reference document contains information on the AREVA group's objectives, prospects and development strategies, particularly in Chapters 4 and 7. It contains information on the markets, market shares and competitive position of the AREVA group. Content: - 1 Person responsible for the reference document and persons responsible for auditing the financial statements; - 2 Information pertaining to the transaction (Not applicable); - 3 General information on the company and its share capital: Information on AREVA, on share capital and voting rights, Investment certificate trading, Dividends, Organization chart of AREVA group companies, Equity interests, Shareholders' agreements; - 4 Information on company operations, new developments and future prospects: Overview and strategy of the AREVA group, The Nuclear Power and Transmission and Distribution markets, The energy businesses of the AREVA group, Front End division, Reactors and Services division, Back End division, Transmission and Distribution division, Major contracts, The principal sites of the AREVA group, AREVA's customers and suppliers, Sustainable Development and Continuous Improvement, Capital spending programs, Research and development programs, intellectual property and trademarks, Risk and insurance; - 5 Assets - Financial position - Financial performance: Analysis of and comments on the group's financial position and performance, 2006 Human Resources Report, Environmental Report, Consolidated financial statements, Notes to the consolidated financial statements, AREVA SA financial statements, Notes to the corporate financial statements; 6 - Corporate Governance: Composition and functioning of corporate bodies, Executive compensation, Profit-sharing plans, AREVA Values Charter, Annual Combined General Meeting of Shareholders of May 3, 2007; 7 - Recent developments and future prospects: Events subsequent to year-end closing for 2006, Outlook; 8 - Glossary; 9 - Table of concordance

  9. Areva - 2014 Reference document

    International Nuclear Information System (INIS)

    2015-01-01

    Areva supplies high added-value products and services to support the operation of the global nuclear fleet. The company is present throughout the entire nuclear cycle, from uranium mining to used fuel recycling, including nuclear reactor design and operating services. Areva is recognized by utilities around the world for its expertise, its skills in cutting-edge technologies and its dedication to the highest level of safety. Areva's 44,000 employees are helping build tomorrow's energy model: supplying ever safer, cleaner and more economical energy to the greatest number of people. This Reference Document contains information on Areva's objectives, prospects and development strategies. It contains estimates of the markets, market shares and competitive position of Areva. Contents: 1 - Person responsible; 2 - Statutory auditors; 3 - Selected financial information; 4 - Risk factors; 5 - Information about the issuer; 6 - Business overview; 7 - Organizational structure; 8 - Property, plant and equipment; 9 - Analysis of and comments on the group's financial position and performance; 10 - Capital resources; 11 - Research and development programs, patents and licenses; 12 - Trend information; 13 - Profit forecasts; 14 - Administrative, management and supervisory bodies and senior management; 15 - Compensation and benefits; 16 - Functioning of administrative, management and supervisory bodies and senior management; 17 - Employees; 18 - Principal shareholders; 19 - Transactions with related parties; 20 - Financial information concerning assets, financial positions and financial performance; 21 - Additional information; 22 - Major contracts; 23 - Third party information, statements by experts and declarations of interest; 24 - Documents on display; 25 - information on holdings; appendix: Report of the Chairman of the Board of Directors on governance, internal control procedures and risk management, Statutory Auditors' report, Corporate social

  10. Areva reference document 2007

    International Nuclear Information System (INIS)

    2008-01-01

    This reference document contains information on the AREVA group's objectives, prospects and development strategies, particularly in Chapters 4 and 7. It contains also information on the markets, market shares and competitive position of the AREVA group. Content: 1 - Person responsible for the reference document and persons responsible for auditing the financial statements; 2 - Information pertaining to the transaction (not applicable); 3 - General information on the company and its share capital: Information on Areva, Information on share capital and voting rights, Investment certificate trading, Dividends, Organization chart of AREVA group companies, Equity interests, Shareholders' agreements; 4 - Information on company operations, new developments and future prospects: Overview and strategy of the AREVA group, The Nuclear Power and Transmission and Distribution markets, The energy businesses of the AREVA group, Front End division, Reactors and Services division, Back End division, Transmission and Distribution division, Major contracts 140 Principal sites of the AREVA group, AREVA's customers and suppliers, Sustainable Development and Continuous Improvement, Capital spending programs, Research and Development programs, Intellectual Property and Trademarks, Risk and insurance; 5 - Assets financial position financial performance: Analysis of and comments on the group's financial position and performance, Human Resources report, Environmental report, Consolidated financial statements 2007, Notes to the consolidated financial statements, Annual financial statements 2007, Notes to the corporate financial statements; 6 - Corporate governance: Composition and functioning of corporate bodies, Executive compensation, Profit-sharing plans, AREVA Values Charter, Annual Ordinary General Meeting of Shareholders of April 17, 2008; 7 - Recent developments and future prospects: Events subsequent to year-end closing for 2007, Outlook; Glossary; table of concordance

  11. Documents and legal texts

    International Nuclear Information System (INIS)

    2015-01-01

    This section treats of the following Documents and legal texts: 1 - Canada: Nuclear Liability and Compensation Act (An Act respecting civil liability and compensation for damage in case of a nuclear incident, repealing the Nuclear Liability Act and making consequential amendments to other acts); 2 - Japan: Act on Compensation for Nuclear Damage (The purpose of this act is to protect persons suffering from nuclear damage and to contribute to the sound development of the nuclear industry by establishing a basic system regarding compensation in case of nuclear damage caused by reactor operation etc.); Act on Indemnity Agreements for Compensation of Nuclear Damage; 3 - Slovak Republic: Act on Civil Liability for Nuclear Damage and on its Financial Coverage and on Changes and Amendments to Certain Laws (This Act regulates: a) The civil liability for nuclear damage incurred in the causation of a nuclear incident, b) The scope of powers of the Nuclear Regulatory Authority (hereinafter only as the 'Authority') in relation to the application of this Act, c) The competence of the National Bank of Slovakia in relation to the supervised financial market entities in the financial coverage of liability for nuclear damage; and d) The penalties for violation of this Act)

  12. Documents and legal texts

    International Nuclear Information System (INIS)

    2014-01-01

    This section of the Bulletin presents the recently published documents and legal texts sorted by country: - Brazil: Resolution No. 169 of 30 April 2014. - Japan: Act Concerning Exceptions to Interruption of Prescription Pertaining to Use of Settlement Mediation Procedures by the Dispute Reconciliation Committee for Nuclear Damage Compensation in relation to Nuclear Damage Compensation Disputes Pertaining to the Great East Japan Earthquake (Act No. 32 of 5 June 2013); Act Concerning Measures to Achieve Prompt and Assured Compensation for Nuclear Damage Arising from the Nuclear Plant Accident following the Great East Japan Earthquake and Exceptions to the Extinctive Prescription, etc. of the Right to Claim Compensation for Nuclear Damage (Act No. 97 of 11 December 2013); Fourth Supplement to Interim Guidelines on Determination of the Scope of Nuclear Damage Resulting from the Accident at the Tokyo Electric Power Company Fukushima Daiichi and Daini Nuclear Power Plants (Concerning Damages Associated with the Prolongation of Evacuation Orders, etc.); Outline of 'Fourth Supplement to Interim Guidelines (Concerning Damages Associated with the Prolongation of Evacuation Orders, etc.)'. - OECD Nuclear Energy Agency: Decision and Recommendation of the Steering Committee Concerning the Application of the Paris Convention to Nuclear Installations in the Process of Being Decommissioned; Joint Declaration on the Security of Supply of Medical Radioisotopes. - United Arab Emirates: Federal Decree No. (51) of 2014 Ratifying the Convention on Supplementary Compensation for Nuclear Damage; Ratification of the Federal Supreme Council of Federal Decree No. (51) of 2014 Ratifying the Convention on Supplementary Compensation for Nuclear Damage

  13. Document image analysis: A primer

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    (1) Typical documents in today's office are computer-generated, but even so, inevitably by different computers and ... different sizes, from a business card to a large engineering drawing. Document analysis ... Whether global or adaptive ...

  14. Document management in engineering construction

    International Nuclear Information System (INIS)

    Liao Bing

    2008-01-01

    Document management is one important part of systematic quality management, which is one of the key factors to ensure the construction quality. In the engineering construction, quality management and document management shall interwork all the time, to ensure the construction quality. Quality management ensures that the document is correctly generated and adopted, and thus the completeness, accuracy and systematicness of the document satisfy the filing requirements. Document management ensures that the document is correctly transferred during the construction, and various testimonies such as files and records are kept for the engineering construction and its quality management. This paper addresses the document management in the engineering construction based on the interwork of the quality management and document management. (author)

  15. Nepal CRS project incorporates.

    Science.gov (United States)

    1983-01-01

    The Nepal Contraceptive Retail Sales (CRS) Project, 5 years after lauching product sales in June 1978, incorporated as a private, nonprofit company under Nepalese management. The transition was finalized in August 1983. The Company will work through a cooperative agreement with USAID/Kathmandu to complement the national family planning goals as the program continues to provide comtraceptives through retail channels at subsidized prices. Company objectives include: increase contraceptive sales by at least 15% per year; make CRS cost effective and move towards self sufficiency; and explore the possibility of marketing noncontraceptive health products to improve primary health care. After only5 years the program can point to some impressive successes. The number of retial shops selling family planning products increased from 100 in 1978 to over 8000, extending CRS product availability to 66 of the country's 75 districts. Retail sales have climbed dramatically in the 5-year period, from Rs 46,817 in 1978 to Rs 271,039 in 1982. Sales in terms of couple year protection CYP) have grown to 24,451 CYP(1982), a 36% increase over 1980 CYP. Since the beginning of the CRS marketing program, total distribution of contraceptives--through both CRS and the Family Planning Maternal and Child Haelth (FP/MCH) Project--has been increasing. While the FP/MCH program remains the largest distributor,contribution of CRS Products is increasing, indicating that CRS is creating new product acceptors. CRS market share in 1982 was 43% for condoms and 16% for oral contraceptives (OCs). CRS markets 5 products which are subsidized in order to be affordable to consumers as well as attractive to sellers. The initial products launched in June 1978 were Gulaf standard dose OCs and Dhaal lubricated colored condoms. A less expensive lubricates, plain Suki-Dhaal condom was introduced in June 1980 in an attempt to reach poorer rural populations, but rural distribution costs are excessive and Suki

  16. Recommended HSE-7 documents hierarchy

    International Nuclear Information System (INIS)

    Klein, R.B.; Jennrich, E.A.; Lund, D.M.; Danna, J.G.; Davis, K.D.; Rutz, A.C.

    1990-01-01

    This report recommends a hierarchy of waste management documents at Los Alamos National Laboratory (LANL or ''Laboratory''). The hierarchy addresses documents that are required to plan, implement, and document waste management programs at Los Alamos. These documents will enable the waste management group and the six sections contained within that group to satisfy requirements that are imposed upon them by the US Department of Energy (DOE), DOE Albuquerque Operations, US Environmental Protection Agency, various State of New Mexico agencies, and Laboratory management

  17. Strange Bedfellows? Reaffirming Rehabilitation and Prison Privatization

    Science.gov (United States)

    Wright, Kevin A.

    2010-01-01

    Private prisons are here to stay irrespective of empirical findings for or against their existence in the corrections industry. It is necessary, therefore, to step back and consider them on a broader level to assess how they can benefit current penological practice. It will be argued that prison privatization creates an opportunity to reassess the…

  18. Improving collaborative documentation in CMS

    International Nuclear Information System (INIS)

    Lassila-Perini, Kati; Salmi, Leena

    2010-01-01

    Complete and up-to-date documentation is essential for efficient data analysis in a large and complex collaboration like CMS. Good documentation reduces the time spent in problem solving for users and software developers. The scientists in our research environment do not necessarily have the interests or skills of professional technical writers. This results in inconsistencies in the documentation. To improve the quality, we have started a multidisciplinary project involving CMS user support and expertise in technical communication from the University of Turku, Finland. In this paper, we present possible approaches to study the usability of the documentation, for instance, usability tests conducted recently for the CMS software and computing user documentation.

  19. Gaia DR2 documentation

    Science.gov (United States)

    van Leeuwen, F.; de Bruijne, J. H. J.; Arenou, F.; Bakker, J.; Blomme, R.; Busso, G.; Cacciari, C.; Castañeda, J.; Cellino, A.; Clotet, M.; Comoretto, G.; Eyer, L.; González-Núñez, J.; Guy, L.; Hambly, N.; Hobbs, D.; van Leeuwen, M.; Luri, X.; Manteiga, M.; Pourbaix, D.; Roegiers, T.; Salgado, J.; Sartoretti, P.; Tanga, P.; Ulla, A.; Utrilla Molina, E.; Abreu, A.; Altmann, M.; Andrae, R.; Antoja, T.; Audard, M.; Babusiaux, C.; Bailer-Jones, C. A. L.; Barache, C.; Bastian, U.; Beck, M.; Berthier, J.; Bianchi, L.; Biermann, M.; Bombrun, A.; Bossini, D.; Breddels, M.; Brown, A. G. A.; Busonero, D.; Butkevich, A.; Cantat-Gaudin, T.; Carrasco, J. M.; Cheek, N.; Clementini, G.; Creevey, O.; Crowley, C.; David, M.; Davidson, M.; De Angeli, F.; De Ridder, J.; Delbò, M.; Dell'Oro, A.; Diakité, S.; Distefano, E.; Drimmel, R.; Durán, J.; Evans, D. W.; Fabricius, C.; Fabrizio, M.; Fernández-Hernández, J.; Findeisen, K.; Fleitas, J.; Fouesneau, M.; Galluccio, L.; Gracia-Abril, G.; Guerra, R.; Gutiérrez-Sánchez, R.; Helmi, A.; Hernandez, J.; Holl, B.; Hutton, A.; Jean-Antoine-Piccolo, A.; Jevardat de Fombelle, G.; Joliet, E.; Jordi, C.; Juhász, Á.; Klioner, S.; Löffler, W.; Lammers, U.; Lanzafame, A.; Lebzelter, T.; Leclerc, N.; Lecoeur-Taïbi, I.; Lindegren, L.; Marinoni, S.; Marrese, P. M.; Mary, N.; Massari, D.; Messineo, R.; Michalik, D.; Mignard, F.; Molinaro, R.; Molnár, L.; Montegriffo, P.; Mora, A.; Mowlavi, N.; Muinonen, K.; Muraveva, T.; Nienartowicz, K.; Ordenovic, C.; Pancino, E.; Panem, C.; Pauwels, T.; Petit, J.; Plachy, E.; Portell, J.; Racero, E.; Regibo, S.; Reylé, C.; Rimoldini, L.; Ripepi, V.; Riva, A.; Robichon, N.; Robin, A.; Roelens, M.; Romero-Gómez, M.; Sarro, L.; Seabroke, G.; Segovia, J. C.; Siddiqui, H.; Smart, R.; Smith, K.; Sordo, R.; Soria, S.; Spoto, F.; Stephenson, C.; Turon, C.; Vallenari, A.; Veljanoski, J.; Voutsinas, S.

    2018-04-01

    The second Gaia data release, Gaia DR2, encompasses astrometry, photometry, radial velocities, astrophysical parameters (stellar effective temperature, extinction, reddening, radius, and luminosity), and variability information plus astrometry and photometry for a sample of pre-selected bodies in the solar system. The data collected during the first 22 months of the nominal, five-year mission have been processed by the Gaia Data Processing and Analysis Consortium (DPAC), resulting into this second data release. A summary of the release properties is provided in Gaia Collaboration et al. (2018b). The overall scientific validation of the data is described in Arenou et al. (2018). Background information on the mission and the spacecraft can be found in Gaia Collaboration et al. (2016), with a more detailed presentation of the Radial Velocity Spectrometer (RVS) in Cropper et al. (2018). In addition, Gaia DR2 is accompanied by various, dedicated papers that describe the processing and validation of the various data products. Four more Gaia Collaboration papers present a glimpse of the scientific richness of the data. In addition to this set of refereed publications, this documentation provides a detailed, complete overview of the processing and validation of the Gaia DR2 data. Gaia data, from both Gaia DR1 and Gaia DR2, can be retrieved from the Gaia archive, which is accessible from https://archives.esac.esa.int/gaia. The archive also provides various tutorials on data access and data queries plus an integrated data model (i.e., description of the various fields in the data tables). In addition, Luri et al. (2018) provide concrete advice on how to deal with Gaia astrometry, with recommendations on how best to estimate distances from parallaxes. The Gaia archive features an enhanced visualisation service which can be used for quick initial explorations of the entire Gaia DR2 data set. Pre-computed cross matches between Gaia DR2 and a selected set of large surveys are

  20. World Energy Projection System model documentation

    International Nuclear Information System (INIS)

    Hutzler, M.J.; Anderson, A.T.

    1997-09-01

    The World Energy Projection System (WEPS) was developed by the Office of Integrated Analysis and Forecasting within the Energy Information Administration (EIA), the independent statistical and analytical agency of the US Department of Energy. WEPS is an integrated set of personal computer based spreadsheets containing data compilations, assumption specifications, descriptive analysis procedures, and projection models. The WEPS accounting framework incorporates projections from independently documented models and assumptions about the future energy intensity of economic activity (ratios of total energy consumption divided by gross domestic product GDP), and about the rate of incremental energy requirements met by natural gas, coal, and renewable energy sources (hydroelectricity, geothermal, solar, wind, biomass, and other renewable resources). Projections produced by WEPS are published in the annual report, International Energy Outlook. This report documents the structure and procedures incorporated in the 1998 version of the WEPS model. It has been written to provide an overview of the structure of the system and technical details about the operation of each component of the model for persons who wish to know how WEPS projections are produced by EIA

  1. World Energy Projection System model documentation

    Energy Technology Data Exchange (ETDEWEB)

    Hutzler, M.J.; Anderson, A.T.

    1997-09-01

    The World Energy Projection System (WEPS) was developed by the Office of Integrated Analysis and Forecasting within the Energy Information Administration (EIA), the independent statistical and analytical agency of the US Department of Energy. WEPS is an integrated set of personal computer based spreadsheets containing data compilations, assumption specifications, descriptive analysis procedures, and projection models. The WEPS accounting framework incorporates projections from independently documented models and assumptions about the future energy intensity of economic activity (ratios of total energy consumption divided by gross domestic product GDP), and about the rate of incremental energy requirements met by natural gas, coal, and renewable energy sources (hydroelectricity, geothermal, solar, wind, biomass, and other renewable resources). Projections produced by WEPS are published in the annual report, International Energy Outlook. This report documents the structure and procedures incorporated in the 1998 version of the WEPS model. It has been written to provide an overview of the structure of the system and technical details about the operation of each component of the model for persons who wish to know how WEPS projections are produced by EIA.

  2. Use of an advanced document system in post-refuelling updating of nuclear power plant documentation

    International Nuclear Information System (INIS)

    Puech Suanzes, P.; Cortes Soler, M.

    1993-01-01

    This paper discusses the results of the extensive use of an advanced document system to update documentation prepared by traditional methods and affected by changes in the period between two plant refuellings. The implementation of a system for the capture, retrieval and storage of drawings using optical discs is part of a plan to modernize production and management tools and to thus achieve better control of document configuration. These processes are consequently optimized in that: 1. The deterioration of drawings is detained with the help of an identical, updated, legible, reliable support for all users. 2. The time required to update documentation is reduced. Given the large number of drawings, the implementation method should effectively combine costs and time. The document management tools ensure optical disc storage control so that from the moment a drawing resides in the system, any modification to it is made through the system utilities, thus ensuring quality and reducing schedules. The system described was used to update the electrical drawings of Almaraz Nuclear Power Plant. Changes made during the eighth refuelling of Unit I were incorporated and the time needed to issue the updated drawings was reduced by one month. (author)

  3. Documentation of Cultural Heritage Objects

    Directory of Open Access Journals (Sweden)

    Jon Grobovšek

    2013-09-01

    Full Text Available EXTENDED ABSTRACT:The first and important phase of documentation of cultural heritage objects is to understand which objects need to be documented. The entire documentation process is determined by the characteristics and scope of the cultural heritage object. The next question to be considered is the expected outcome of the documentation process and the purpose for which it will be used. These two essential guidelines determine each stage of the documentation workflow: the choice of the most appropriate data capturing technology and data processing method, how detailed should the documentation be, what problems may occur, what the expected outcome is, what it will be used for, and the plan for storing data and results. Cultural heritage objects require diverse data capturing and data processing methods. It is important that even the first stages of raw data capturing are oriented towards the applicability of results. The selection of the appropriate working method can facilitate the data processing and the preparation of final documentation. Documentation of paintings requires different data capturing method than documentation of buildings or building areas. The purpose of documentation can also be the preservation of the contemporary cultural heritage to posterity or the basis for future projects and activities on threatened objects. Documentation procedures should be adapted to our needs and capabilities. Captured and unprocessed data are lost unless accompanied by additional analyses and interpretations. Information on tools, procedures and outcomes must be included into documentation. A thorough analysis of unprocessed but accessible documentation, if adequately stored and accompanied by additional information, enables us to gather useful data. In this way it is possible to upgrade the existing documentation and to avoid data duplication or unintentional misleading of users. The documentation should be archived safely and in a way to meet

  4. EDF Group - 2010 Reference Document

    International Nuclear Information System (INIS)

    2011-04-01

    Beside the accounts of EDF for 2008 and 2009, this voluminous document presents persons in charge, legal account auditors, and how risks are managed within the company. It gives an overview of EDF activities, of its organization, of its assets. It presents and discusses its financial situation and results, indicates the main contracts, and proposes other documents concerning the company. Many documents and reports are provided in appendix

  5. Document understanding for a broad class of documents

    NARCIS (Netherlands)

    Aiello, Marco; Monz, Christof; Todoran, Leon; Worring, Marcel

    2002-01-01

    We present a document analysis system able to assign logical labels and extract the reading order in a broad set of documents. All information sources, from geometric features and spatial relations to the textual features and content are employed in the analysis. To deal effectively with these

  6. Project Documentation as a Risk for Public Projects

    Directory of Open Access Journals (Sweden)

    Vladěna Štěpánková

    2015-08-01

    Full Text Available Purpose of the article: The paper presents the different methodologies used for creating documentation and focuses on public projects and their requirements for this documentation. Since documentation is also incorporated in the overall planning of the project and its duration is estimated using expert qualified estimate, can any change in this documentation lead to project delays, or increase its cost as a result of consuming administration, and therefore the documentation is seen as a risk, which may threaten the project as a public contract by which a company trying to achieve and obtains it, and generally any project. Methodology/methods: There are used methods of obtaining information in this paper. These are mainly structured interviews in combination with a brainstorming, furthermore also been used questionnaire for companies dealing with public procurement. As a data processing program was used MS Excel and basic statistical methods based on regression analysis. Scientific aim: The article deals with the construction market in the Czech Republic and examines the impact of changes in project documentation of public projects on their turnover. Findings: In this paper we summarize the advantages and disadvantages of having project documentation. In the case of public contracts and changes in legislation it is necessary to focus on creating documentation in advance, follow the new requirements and try to reach them in the shortest possible time. Conclusions: The paper concludes with recommendations on how to proceed, if these changes and how to reduce costs, which may cause the risk of documentation.

  7. Nuclear power plants documentation system

    International Nuclear Information System (INIS)

    Schwartz, E.L.

    1991-01-01

    Since the amount of documents (type and quantity) necessary for the entire design of a NPP is very large, this implies that an overall and detailed identification, filling and retrieval system shall be implemented. This is even more applicable to the FINAL QUALITY DOCUMENTATION of the plant, as stipulated by IAEA Safety Codes and related guides. For such a purpose it was developed a DOCUMENTATION MANUAL, which describes in detail the before mentioned documentation system. Here we present the expected goals and results which we have to reach for Angra 2 and 3 Project. (author)

  8. Analysis of the recent international documents toward inclusive education of children with disabilities

    Directory of Open Access Journals (Sweden)

    Tabatabaie Minou

    2012-01-01

    Full Text Available Analysis of various international documents clearly suggests that international documents have provided a significantmotivation to efforts undertaken at the national level about education of children with disabilities. UN Convention on theRights of the Child imposed a requirement for radical changes to traditional approaches to provision made for children withdisabilities. One year later, the 1990 World Conference on Education for all focused attention on a much broader range ofchildren with disabilities who may be excluded from or marginalized within education systems. Its development has involveda series of stages during which education systems have explored different ways of responding to children with disabilities andothers who experience difficulties in learning. This conference declared the inclusive education is regarded as the only meansto achieve the goal of "Education for All". This trend was reaffirmed by next international documents. And finally, accordingto the article 24 of the Convention on the rights of persons with disabilities, disabled persons should be able to accessgeneral tertiary education, vocational training, adult education and lifelong learning without discrimination and on an equalbasis with others through reasonable accommodation of their disabilities. All of these documents played an important role inbringing the attention on to children with disabilities, especially on education as a vehicle for integration and empowerment.This research examines the new international trends occurring regarding the education of children with disabilities and finallyresults that the new trends show a movement from special education to inclusive education and moving from seclusion toinclusion and provide that solutions must focus on prevention, cure and steps to make these children as normal as possible.In this regard, States must ensure the full realization of all human rights and fundamental freedoms for all disabled people,on an

  9. Storing XML Documents in Databases

    NARCIS (Netherlands)

    A.R. Schmidt; S. Manegold (Stefan); M.L. Kersten (Martin); L.C. Rivero; J.H. Doorn; V.E. Ferraggine

    2005-01-01

    textabstractThe authors introduce concepts for loading large amounts of XML documents into databases where the documents are stored and maintained. The goal is to make XML databases as unobtrusive in multi-tier systems as possible and at the same time provide as many services defined by the XML

  10. Document Organization Using Kohonen's Algorithm.

    Science.gov (United States)

    Guerrero Bote, Vicente P.; Moya Anegon, Felix de; Herrero Solana, Victor

    2002-01-01

    Discussion of the classification of documents from bibliographic databases focuses on a method of vectorizing reference documents from LISA (Library and Information Science Abstracts) which permits their topological organization using Kohonen's algorithm. Analyzes possibilities of this type of neural network with respect to the development of…

  11. SRS ecology: Environmental information document

    International Nuclear Information System (INIS)

    Wike, L.D.; Shipley, R.W.; Bowers, J.A.

    1993-09-01

    The purpose of this Document is to provide a source of ecological information based on the exiting knowledge gained from research conducted at the Savannah River Site. This document provides a summary and synthesis of ecological research in the three main ecosystem types found at SRS and information on the threatened and endangered species residing there

  12. Magnetic fusion program summary document

    International Nuclear Information System (INIS)

    1979-04-01

    This document outlines the current and planned research, development, and commercialization (RD and C) activities of the Offic of Fusion Energy under the Assistant Secretary for Energy Technology, US Department of Energy (DOE). The purpose of this document is to explain the Office of Fusion Energy's activities to Congress and its committees and to interested members of the public

  13. Documenting the Engineering Design Process

    Science.gov (United States)

    Hollers, Brent

    2017-01-01

    Documentation of ideas and the engineering design process is a critical, daily component of a professional engineer's job. While patent protection is often cited as the primary rationale for documentation, it can also benefit the engineer, the team, company, and stakeholders through creating a more rigorously designed and purposeful solution.…

  14. SRS ecology: Environmental information document

    Energy Technology Data Exchange (ETDEWEB)

    Wike, L.D.; Shipley, R.W.; Bowers, J.A. [and others

    1993-09-01

    The purpose of this Document is to provide a source of ecological information based on the exiting knowledge gained from research conducted at the Savannah River Site. This document provides a summary and synthesis of ecological research in the three main ecosystem types found at SRS and information on the threatened and endangered species residing there.

  15. ITK optical links backup document

    CERN Document Server

    Huffman, B T; The ATLAS collaboration; Flick, T; Ye, J

    2013-01-01

    This document describes the proposed optical links to be used for the ITK in the phase II upgrade. The current R&D for optical links pursued in the Versatile Link group is reviewed. In particular the results demonstrating the radiation tolerance of all the on-detector components are documented. The bandwidth requirements and the resulting numerology are given.

  16. Contextualizing Data Warehouses with Documents

    DEFF Research Database (Denmark)

    Perez, Juan Manuel; Berlanga, Rafael; Aramburu, Maria Jose

    2008-01-01

    warehouse with a document warehouse, resulting in a contextualized warehouse. Thus, the user first selects an analysis context by supplying some keywords. Then, the analysis is performed on a novel type of OLAP cube, called an R-cube, which is materialized by retrieving and ranking the documents...

  17. Triangular clustering in document networks

    Energy Technology Data Exchange (ETDEWEB)

    Cheng Xueqi; Ren Fuxin [Institute of Computing Technology, Chinese Academy of Sciences, Beijing 100190 (China); Zhou Shi [Department of Computer Science, University College London, Malet Place, London WC1E 6BT (United Kingdom); Hu Maobin [School of Engineering Science, University of Science and Technology of China, Hefei 230026 (China)], E-mail: cxq@ict.ac.cn, E-mail: renfuxin@software.ict.ac.cn, E-mail: s.zhou@adastral.ucl.ac.uk, E-mail: humaobin@ustc.edu.cn

    2009-03-15

    Document networks have the characteristic that a document node, e.g. a webpage or an article, carries meaningful content. Properties of document networks are not only affected by topological connectivity between nodes, but are also strongly influenced by the semantic relation between the content of the nodes. We observed that document networks have a large number of triangles and a high value clustering coefficient. Also there is a strong correlation between the probability of formation of a triangle and the content similarity among the three nodes involved. We propose the degree-similarity product (DSP) model, which well reproduces these properties. The model achieves this by using a preferential attachment mechanism that favours the linkage between nodes that are both popular and similar. This work is a step forward towards a better understanding of the structure and evolution of document networks.

  18. Engineering Documentation and Data Control

    Science.gov (United States)

    Matteson, Michael J.; Bramley, Craig; Ciaruffoli, Veronica

    2001-01-01

    Mississippi Space Services (MSS) the facility services contractor for NASA's John C. Stennis Space Center (SSC), is utilizing technology to improve engineering documentation and data control. Two identified improvement areas, labor intensive documentation research and outdated drafting standards, were targeted as top priority. MSS selected AutoManager(R) WorkFlow from Cyco software to manage engineering documentation. The software is currently installed on over 150 desctops. The outdated SSC drafting standard was written for pre-CADD drafting methods, in other words, board drafting. Implementation of COTS software solutions to manage engineering documentation and update the drafting standard resulted in significant increases in productivity by reducing the time spent searching for documents.

  19. Shoulder dystocia documentation: an evaluation of a documentation training intervention.

    Science.gov (United States)

    LeRiche, Tammy; Oppenheimer, Lawrence; Caughey, Sharon; Fell, Deshayne; Walker, Mark

    2015-03-01

    To evaluate the quality and content of nurse and physician shoulder dystocia delivery documentation before and after MORE training in shoulder dystocia management skills and documentation. Approximately 384 charts at the Ottawa Hospital General Campus involving a diagnosis of shoulder dystocia between the years of 2000 and 2006 excluding the training year of 2003 were identified. The charts were evaluated for 14 key components derived from a validated instrument. The delivery notes were then scored based on these components by 2 separate investigators who were blinded to delivery note author, date, and patient identification to further quantify delivery record quality. Approximately 346 charts were reviewed for physician and nurse delivery documentation. The average score for physician notes was 6 (maximum possible score of 14) both before and after the training intervention. The nurses' average score was 5 before and after the training intervention. Negligible improvement was observed in the content and quality of shoulder dystocia documentation before and after nurse and physician training.

  20. Audit of Orthopaedic Surgical Documentation

    Directory of Open Access Journals (Sweden)

    Fionn Coughlan

    2015-01-01

    Full Text Available Introduction. The Royal College of Surgeons in England published guidelines in 2008 outlining the information that should be documented at each surgery. St. James’s Hospital uses a standard operation sheet for all surgical procedures and these were examined to assess documentation standards. Objectives. To retrospectively audit the hand written orthopaedic operative notes according to established guidelines. Methods. A total of 63 operation notes over seven months were audited in terms of date and time of surgery, surgeon, procedure, elective or emergency indication, operative diagnosis, incision details, signature, closure details, tourniquet time, postop instructions, complications, prosthesis, and serial numbers. Results. A consultant performed 71.4% of procedures; however, 85.7% of the operative notes were written by the registrar. The date and time of surgery, name of surgeon, procedure name, and signature were documented in all cases. The operative diagnosis and postoperative instructions were frequently not documented in the designated location. Incision details were included in 81.7% and prosthesis details in only 30% while the tourniquet time was not documented in any. Conclusion. Completion and documentation of operative procedures were excellent in some areas; improvement is needed in documenting tourniquet time, prosthesis and incision details, and the location of operative diagnosis and postoperative instructions.

  1. Documents

    International Development Research Centre (IDRC) Digital Library (Canada)

    livelihoods in spite of chronic water shortages. Farmers' Association: By the People for the People. Supported by WaDImena, a team from the Desert. Development Centre (DDC) at the American University in. Cairo helped farmers to found their first association to improve agricultural water management in Abu Minqar.

  2. Document Management in Local Government.

    Science.gov (United States)

    Williams, Bernard J. S.

    1998-01-01

    The latest in electronic document management in British local government is discussed. Finance, revenues, and benefits systems of leading vendors to local authorities are highlighted. A planning decisions archive management system and other information services are discussed. (AEF)

  3. Vietnamese Document Representation and Classification

    Science.gov (United States)

    Nguyen, Giang-Son; Gao, Xiaoying; Andreae, Peter

    Vietnamese is very different from English and little research has been done on Vietnamese document classification, or indeed, on any kind of Vietnamese language processing, and only a few small corpora are available for research. We created a large Vietnamese text corpus with about 18000 documents, and manually classified them based on different criteria such as topics and styles, giving several classification tasks of different difficulty levels. This paper introduces a new syllable-based document representation at the morphological level of the language for efficient classification. We tested the representation on our corpus with different classification tasks using six classification algorithms and two feature selection techniques. Our experiments show that the new representation is effective for Vietnamese categorization, and suggest that best performance can be achieved using syllable-pair document representation, an SVM with a polynomial kernel as the learning algorithm, and using Information gain and an external dictionary for feature selection.

  4. Virtual Library Design Document; TOPICAL

    International Nuclear Information System (INIS)

    M. A. deLamare

    2001-01-01

    The objective of this document is to establish a design for the virtual library user and administrative layers that complies with the requirements of the virtual library software specification and subordinate module specification

  5. Reactor operation environmental information document

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, L.R.; Hayes, D.W.; Hunter, C.H.; Marter, W.L.; Moyer, R.A.

    1989-12-01

    This volume is a reactor operation environmental information document for the Savannah River Plant. Topics include meteorology, surface hydrology, transport, environmental impacts, and radiation effects. 48 figs., 56 tabs. (KD)

  6. ENDF/B summary documentation

    International Nuclear Information System (INIS)

    Kinsey, R.

    1979-07-01

    This publication provides a localized source of descriptions for the evaluations contained in the ENDF/B Library. The summary documentation presented is intended to be a more detailed description than the (File 1) comments contained in the computer readable data files, but not so detailed as the formal reports describing each ENDF/B evaluation. The summary documentations were written by the CSEWB (Cross Section Evaluation Working Group) evaluators and compiled by NNDC (National Nuclear Data Center). This edition includes documentation for materials found on ENDF/B Version V tapes 501 to 516 (General Purpose File) excluding tape 504. ENDF/B-V also includes tapes containing partial evaluations for the Special Purpose Actinide (521, 522), Dosimetry (531), Activation (532), Gas Production (533), and Fission Product (541-546) files. The materials found on these tapes are documented elsewhere. Some of the evaluation descriptions in this report contain cross sections or energy level information

  7. CERN Document Server (CDS): Introduction

    CERN Multimedia

    CERN. Geneva; Costa, Flavio

    2017-01-01

    A short online tutorial introducing the CERN Document Server (CDS). Basic functionality description, the notion of Revisions and the CDS test environment. Links: CDS Production environment CDS Test environment  

  8. ENDF/B summary documentation

    Energy Technology Data Exchange (ETDEWEB)

    Kinsey, R. (comp.)

    1979-07-01

    This publication provides a localized source of descriptions for the evaluations contained in the ENDF/B Library. The summary documentation presented is intended to be a more detailed description than the (File 1) comments contained in the computer readable data files, but not so detailed as the formal reports describing each ENDF/B evaluation. The summary documentations were written by the CSEWB (Cross Section Evaluation Working Group) evaluators and compiled by NNDC (National Nuclear Data Center). This edition includes documentation for materials found on ENDF/B Version V tapes 501 to 516 (General Purpose File) excluding tape 504. ENDF/B-V also includes tapes containing partial evaluations for the Special Purpose Actinide (521, 522), Dosimetry (531), Activation (532), Gas Production (533), and Fission Product (541-546) files. The materials found on these tapes are documented elsewhere. Some of the evaluation descriptions in this report contain cross sections or energy level information. (RWR)

  9. Document development, management and transmission

    International Nuclear Information System (INIS)

    Meister, K.

    1998-01-01

    Environmental monitoring can only be carried out by means of cartographic outputs allowing the representation of information in a compressed way and with a local reference. On account of this requirement and the continuously growing importance of international data exchange the development of a universal tool for the combination of data to so-called documents has been started for the management and for the exchange of these documents with other systems. (R.P.)

  10. ENDF/B summary documentation

    International Nuclear Information System (INIS)

    Garber, D.

    1975-10-01

    Descriptions of the evaluations contained in the ENDF/B library are given. The summary documentation presented is intended to be a more detailed description than the (File 1) comments contained in the computer-readable data files, but not so detailed as the formal reports describing each ENDF/B evaluation. The documentations were written by the CSEWG evaluators and compiled by NNCSC. Selected materials which comprise this volume include from 1 H to 244 Cm

  11. Storing XML Documents in Databases

    OpenAIRE

    Schmidt, A.R.; Manegold, Stefan; Kersten, Martin; Rivero, L.C.; Doorn, J.H.; Ferraggine, V.E.

    2005-01-01

    textabstractThe authors introduce concepts for loading large amounts of XML documents into databases where the documents are stored and maintained. The goal is to make XML databases as unobtrusive in multi-tier systems as possible and at the same time provide as many services defined by the XML standards as possible. The ubiquity of XML has sparked great interest in deploying concepts known from Relational Database Management Systems such as declarative query languages, transactions, indexes ...

  12. Extra Dimensions: 3D in PDF Documentation

    International Nuclear Information System (INIS)

    Graf, Norman A

    2012-01-01

    Experimental science is replete with multi-dimensional information which is often poorly represented by the two dimensions of presentation slides and print media. Past efforts to disseminate such information to a wider audience have failed for a number of reasons, including a lack of standards which are easy to implement and have broad support. Adobe's Portable Document Format (PDF) has in recent years become the de facto standard for secure, dependable electronic information exchange. It has done so by creating an open format, providing support for multiple platforms and being reliable and extensible. By providing support for the ECMA standard Universal 3D (U3D) and the ISO PRC file format in its free Adobe Reader software, Adobe has made it easy to distribute and interact with 3D content. Until recently, Adobe's Acrobat software was also capable of incorporating 3D content into PDF files from a variety of 3D file formats, including proprietary CAD formats. However, this functionality is no longer available in Acrobat X, having been spun off to a separate company. Incorporating 3D content now requires the additional purchase of a separate plug-in. In this talk we present alternatives based on open source libraries which allow the programmatic creation of 3D content in PDF format. While not providing the same level of access to CAD files as the commercial software, it does provide physicists with an alternative path to incorporate 3D content into PDF files from such disparate applications as detector geometries from Geant4, 3D data sets, mathematical surfaces or tesselated volumes.

  13. Patterns for Effectively Documenting Frameworks

    Science.gov (United States)

    Aguiar, Ademar; David, Gabriel

    Good design and implementation are necessary but not sufficient pre-requisites for successfully reusing object-oriented frameworks. Although not always recognized, good documentation is crucial for effective framework reuse, and often hard, costly, and tiresome, coming with many issues, especially when we are not aware of the key problems and respective ways of addressing them. Based on existing literature, case studies and lessons learned, the authors have been mining proven solutions to recurrent problems of documenting object-oriented frameworks, and writing them in pattern form, as patterns are a very effective way of communicating expertise and best practices. This paper presents a small set of patterns addressing problems related to the framework documentation itself, here seen as an autonomous and tangible product independent of the process used to create it. The patterns aim at helping non-experts on cost-effectively documenting object-oriented frameworks. In concrete, these patterns provide guidance on choosing the kinds of documents to produce, how to relate them, and which contents to include. Although the focus is more on the documents themselves, rather than on the process and tools to produce them, some guidelines are also presented in the paper to help on applying the patterns to a specific framework.

  14. Host thin films incorporating nanoparticles

    Science.gov (United States)

    Qureshi, Uzma

    The focus of this research project was the investigation of the functional properties of thin films that incorporate a secondary nanoparticulate phase. In particular to assess if the secondary nanoparticulate material enhanced a functional property of the coating on glass. In order to achieve this, new thin film deposition methods were developed, namely use of nanopowder precursors, an aerosol assisted transport technique and an aerosol into atmospheric pressure chemical vapour deposition system. Aerosol assisted chemical vapour deposition (AACVD) was used to deposit 8 series of thin films on glass. Five different nanoparticles silver, gold, ceria, tungsten oxide and zinc oxide were tested and shown to successfully deposit thin films incorporating nanoparticles within a host matrix. Silver nanoparticles were synthesised and doped within a titania film by AACVD. This improved solar control properties. A unique aerosol assisted chemical vapour deposition (AACVD) into atmospheric pressure chemical vapour deposition (APCVD) system was used to deposit films of Au nanoparticles and thin films of gold nanoparticles incorporated within a host titania matrix. Incorporation of high refractive index contrast metal oxide particles within a host film altered the film colour. The key goal was to test the potential of nanopowder forms and transfer the suspended nanopowder via an aerosol to a substrate in order to deposit a thin film. Discrete tungsten oxide nanoparticles or ceria nanoparticles within a titanium dioxide thin film enhanced the self-cleaning and photo-induced super-hydrophilicity. The nanopowder precursor study was extended by deposition of zinc oxide thin films incorporating Au nanoparticles and also ZnO films deposited from a ZnO nanopowder precursor. Incorporation of Au nanoparticles within a VO: host matrix improved the thermochromic response, optical and colour properties. Composite VC/TiC and Au nanoparticle/V02/Ti02 thin films displayed three useful

  15. MONITORED GEOLOGIC REPOSITORY LIFE CYCLE COST ESTIMATE ASSUMPTIONS DOCUMENT

    International Nuclear Information System (INIS)

    R.E. Sweeney

    2001-01-01

    The purpose of this assumptions document is to provide general scope, strategy, technical basis, schedule and cost assumptions for the Monitored Geologic Repository (MGR) life cycle cost (LCC) estimate and schedule update incorporating information from the Viability Assessment (VA) , License Application Design Selection (LADS), 1999 Update to the Total System Life Cycle Cost (TSLCC) estimate and from other related and updated information. This document is intended to generally follow the assumptions outlined in the previous MGR cost estimates and as further prescribed by DOE guidance

  16. Monitored Geologic Repository Life Cycle Cost Estimate Assumptions Document

    International Nuclear Information System (INIS)

    Sweeney, R.

    2000-01-01

    The purpose of this assumptions document is to provide general scope, strategy, technical basis, schedule and cost assumptions for the Monitored Geologic Repository (MGR) life cycle cost estimate and schedule update incorporating information from the Viability Assessment (VA), License Application Design Selection (LADS), 1999 Update to the Total System Life Cycle Cost (TSLCC) estimate and from other related and updated information. This document is intended to generally follow the assumptions outlined in the previous MGR cost estimates and as further prescribed by DOE guidance

  17. Integration of clinical research documentation in electronic health records.

    Science.gov (United States)

    Broach, Debra

    2015-04-01

    Clinical trials of investigational drugs and devices are often conducted within healthcare facilities concurrently with clinical care. With implementation of electronic health records, new communication methods are required to notify nonresearch clinicians of research participation. This article reviews clinical research source documentation, the electronic health record and the medical record, areas in which the research record and electronic health record overlap, and implications for the research nurse coordinator in documentation of the care of the patient/subject. Incorporation of clinical research documentation in the electronic health record will lead to a more complete patient/subject medical record in compliance with both research and medical records regulations. A literature search provided little information about the inclusion of clinical research documentation within the electronic health record. Although regulations and guidelines define both source documentation and the medical record, integration of research documentation in the electronic health record is not clearly defined. At minimum, the signed informed consent(s), investigational drug or device usage, and research team contact information should be documented within the electronic health record. Institutional policies should define a standardized process for this integration in the absence federal guidance. Nurses coordinating clinical trials are in an ideal position to define this integration.

  18. Ba incorporation in benthic foraminifera

    NARCIS (Netherlands)

    de Nooijer, L.J.; Brombacher, Anieke; Mewes, A.; Langer, Gerald; Nehrke, G.; Bijma, Jelle; Reichart, G.J.

    2017-01-01

    Barium (Ba) incorporated in the calcite of many foraminiferal species is proportional to the concentration of Ba in seawater. Since the open ocean concentration of Ba closely follows seawater alkalinity, foraminiferal Ba ∕ Ca can be used to reconstruct the latter. Alternatively, Ba ∕ Ca from

  19. Incorporating Argumentation through Forensic Science

    Science.gov (United States)

    Wheeler, Lindsay B.; Maeng, Jennifer L.; Smetana, Lara K.

    2014-01-01

    This article outlines how to incorporate argumentation into a forensic science unit using a mock trial. Practical details of the mock trial include: (1) a method of scaffolding students' development of their argument for the trial, (2) a clearly outlined set of expectations for students during the planning and implementation of the mock…

  20. EFFECT OF INCORPORATING EXPANDED POLYSTYRENE ...

    African Journals Online (AJOL)

    2012-11-03

    Nov 3, 2012 ... Incorporating expanded polystyrene granules in concrete matrix can produce lightweight polystyrene aggregate concrete of ... structure. [1] reported that the standard workability tests are not suitable for the polystyrene aggregate concrete since they are sensitive to the unit weight of concrete. [2] made ...

  1. Modeling Documents with Event Model

    Directory of Open Access Journals (Sweden)

    Longhui Wang

    2015-08-01

    Full Text Available Currently deep learning has made great breakthroughs in visual and speech processing, mainly because it draws lessons from the hierarchical mode that brain deals with images and speech. In the field of NLP, a topic model is one of the important ways for modeling documents. Topic models are built on a generative model that clearly does not match the way humans write. In this paper, we propose Event Model, which is unsupervised and based on the language processing mechanism of neurolinguistics, to model documents. In Event Model, documents are descriptions of concrete or abstract events seen, heard, or sensed by people and words are objects in the events. Event Model has two stages: word learning and dimensionality reduction. Word learning is to learn semantics of words based on deep learning. Dimensionality reduction is the process that representing a document as a low dimensional vector by a linear mode that is completely different from topic models. Event Model achieves state-of-the-art results on document retrieval tasks.

  2. Novel retrofit technologies incorporating silica aerogel for lower energy buildings

    OpenAIRE

    Dowson, Mark

    2012-01-01

    This thesis was submitted for the degree of Doctor of Engineering and was awarded by Brunel University. The aim of this Engineering Doctorate is to design, build and test novel environmental retrofit technologies to reduce energy consumption in existing buildings. Three contributions to knowledge are documented. The first contribution is the technical verification of a novel proof-of-principle prototype incorporating translucent silica aerogel granules to improve the thermal performance of...

  3. Terminologie de Base de la Documentation. (Basic Terminology of Documentation).

    Science.gov (United States)

    Commission des Communautes Europeennes (Luxembourg). Bureau de Terminologie.

    This glossary is designed to aid non-specialists whose activities require that they have some familiarity with the terminology of the modern methods of documentation. Definitions have been assembled from various dictionaries, manuals, etc., with particular attention being given to the publications of UNESCO and the International Standards…

  4. Reactor operation environmental information document

    Energy Technology Data Exchange (ETDEWEB)

    Haselow, J.S.; Price, V.; Stephenson, D.E.; Bledsoe, H.W.; Looney, B.B.

    1989-12-01

    The Savannah River Site (SRS) produces nuclear materials, primarily plutonium and tritium, to meet the requirements of the Department of Defense. These products have been formed in nuclear reactors that were built during 1950--1955 at the SRS. K, L, and P reactors are three of five reactors that have been used in the past to produce the nuclear materials. All three of these reactors discontinued operation in 1988. Currently, intense efforts are being extended to prepare these three reactors for restart in a manner that protects human health and the environment. To document that restarting the reactors will have minimal impacts to human health and the environment, a three-volume Reactor Operations Environmental Impact Document has been prepared. The document focuses on the impacts of restarting the K, L, and P reactors on both the SRS and surrounding areas. This volume discusses the geology, seismology, and subsurface hydrology. 195 refs., 101 figs., 16 tabs.

  5. Magnetic fusion: Environmental Readiness Document

    International Nuclear Information System (INIS)

    1981-03-01

    Environmental Readiness Documents are prepared periodically to review and evaluate the environmental status of an energy technology during the several phases of development of that technology. Through these documents, the Office of Environment within the Department of Energy provides an independent and objective assessment of the environmental risks and potential impacts associated with the progression of the technology to the next stage of development and with future extensive use of the technology. This Environmental Readiness Document was prepared to assist the Department of Energy in evaluating the readiness of magnetic fusion technology with respect to environmental issues. An effort has been made to identify potential environmental problems that may be encountered based upon current knowledge, proposed and possible new environmental regulations, and the uncertainties inherent in planned environmental research

  6. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    KRIPPS, L.J.

    2005-02-18

    This document describes the qualitative evaluation of frequency and consequences for double shell tank (DST) and single shell tank (SST) representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant SSCs and/or TSRS were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support of the Tank Farms Documented Safety Analysis (DSA) and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.

  7. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    KRIPPS, L.J.

    2005-03-03

    This document describes the qualitative evaluation of frequency and consequences for DST and SST representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant structures, systems and components (SSCs) and/or technical safety requirements (TSRs) were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support WP-13033, Tank Farms Documented Safety Analysis (DSA), and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.

  8. ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    M. Maniyar

    2004-06-22

    The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

  9. Document segmentation via oblique cuts

    Science.gov (United States)

    Svendsen, Jeremy; Branzan-Albu, Alexandra

    2013-01-01

    This paper presents a novel solution for the layout segmentation of graphical elements in Business Intelligence documents. We propose a generalization of the recursive X-Y cut algorithm, which allows for cutting along arbitrary oblique directions. An intermediate processing step consisting of line and solid region removal is also necessary due to presence of decorative elements. The output of the proposed segmentation is a hierarchical structure which allows for the identification of primitives in pie and bar charts. The algorithm was tested on a database composed of charts from business documents. Results are very promising.

  10. Melter Disposal Strategic Planning Document

    Energy Technology Data Exchange (ETDEWEB)

    BURBANK, D.A.

    2000-09-25

    This document describes the proposed strategy for disposal of spent and failed melters from the tank waste treatment plant to be built by the Office of River Protection at the Hanford site in Washington. It describes program management activities, disposal and transportation systems, leachate management, permitting, and safety authorization basis approvals needed to execute the strategy.

  11. Compression of Probabilistic XML Documents

    Science.gov (United States)

    Veldman, Irma; de Keijzer, Ander; van Keulen, Maurice

    Database techniques to store, query and manipulate data that contains uncertainty receives increasing research interest. Such UDBMSs can be classified according to their underlying data model: relational, XML, or RDF. We focus on uncertain XML DBMS with as representative example the Probabilistic XML model (PXML) of [10,9]. The size of a PXML document is obviously a factor in performance. There are PXML-specific techniques to reduce the size, such as a push down mechanism, that produces equivalent but more compact PXML documents. It can only be applied, however, where possibilities are dependent. For normal XML documents there also exist several techniques for compressing a document. Since Probabilistic XML is (a special form of) normal XML, it might benefit from these methods even more. In this paper, we show that existing compression mechanisms can be combined with PXML-specific compression techniques. We also show that best compression rates are obtained with a combination of PXML-specific technique with a rather simple generic DAG-compression technique.

  12. BASIC Instructional Program: System Documentation.

    Science.gov (United States)

    Dageforde, Mary L.

    This report documents the BASIC Instructional Program (BIP), a "hands-on laboratory" that teaches elementary programming in the BASIC language, as implemented in the MAINSAIL language, a machine-independent revision of SAIL which should facilitate implementation of BIP on other computing systems. Eight instructional modules which make up…

  13. The Darfur Atrocities Documentation Project

    Science.gov (United States)

    Totten, Samuel

    2004-01-01

    One of the many important aspects of the Darfur Atrocities Documentation Project was that it set a precedent for what the U.S. and/or other nations can, and should do, when future cases of potential genocide arise. Far too often in the recent past, the international community (the United Nations, individual governments, many nongovernmental…

  14. Variable & Recode Definitions - SEER Documentation

    Science.gov (United States)

    Resources that define variables and provide documentation for reporting using SEER and related datasets. Choose from SEER coding and staging manuals plus instructions for recoding behavior, site, stage, cause of death, insurance, and several additional topics. Also guidance on months survived, calculating Hispanic mortality, and site-specific surgery.

  15. Document Delivery: Evaluating the Options.

    Science.gov (United States)

    Ward, Suzanne M.

    1997-01-01

    Discusses options available to libraries for document delivery. Topics include users' needs; cost; copyright compliance; traditional interlibrary loan; types of suppliers; selection criteria, including customer service; new developments in interlibrary loan, including outsourcing arrangements; and the need to evaluate suppliers. (LRW)

  16. The Digital technical documentation handbook

    CERN Document Server

    Schultz, Susan I; Kavanagh, Frank X; Morse, Marjorie J

    1993-01-01

    The Digital Technical Documentation Handbook describes the process of developing and producing technical user information at Digital Equipment Corporation. * Discusses techniques for making user information _more effective * Covers the draft and reviewprocess, the production and distribution of printed and electronic media, archiving, indexing, testing for usability, and many other topics * Provides quality assurance checklists, contains a glossary and a bibliography of resources for technicalcommunicators

  17. Topology of Document Retrieval Systems.

    Science.gov (United States)

    Everett, Daniel M.; Cater, Steven C.

    1992-01-01

    Explains the use of a topological structure to examine the closeness between documents in retrieval systems and analyzes the topological structure of a vector-space model, a fuzzy-set model, an extended Boolean model, a probabilistic model, and a TIRS (Topological Information Retrieval System) model. Proofs for the results are appended. (17…

  18. Methodological Aspects of Architectural Documentation

    Directory of Open Access Journals (Sweden)

    Arivaldo Amorim

    2011-12-01

    Full Text Available This paper discusses the methodological approach that is being developed in the state of Bahia in Brazil since 2003, in architectural and urban sites documentation, using extensive digital technologies. Bahia has a vast territory with important architectural ensembles ranging from the sixteenth century to present day. As part of this heritage is constructed of raw earth and wood, it is very sensitive to various deleterious agents. It is therefore critical document this collection that is under threats. To conduct those activities diverse digital technologies that could be used in documentation process are being experimented. The task is being developed as an academic research, with few financial resources, by scholarship students and some volunteers. Several technologies are tested ranging from the simplest to the more sophisticated ones, used in the main stages of the documentation project, as follows: work overall planning, data acquisition, processing and management and ultimately, to control and evaluate the work. The activities that motivated this paper are being conducted in the cities of Rio de Contas and Lençóis in the Chapada Diamantina, located at 420 km and 750 km from Salvador respectively, in Cachoeira city at Recôncavo Baiano area, 120 km from Salvador, the capital of Bahia state, and at Pelourinho neighbourhood, located in the historic capital. Part of the material produced can be consulted in the website: < www.lcad.ufba.br>.

  19. Waste Management System Requirements Document

    International Nuclear Information System (INIS)

    1992-02-01

    This DCP establishes an interim plan for the Office of Civilian Radioactive Waste Management (OCRWM) technical baseline until the results of the OCRWM Document Hierarchy Task Force can be implemented. This plan is needed to maintain continuity in the Program for ongoing work in the areas of Waste Acceptance, Transportation, Monitored Retrievable Storage (MRS) and Yucca Mountain Site Characterization

  20. Compression of Probabilistic XML documents

    NARCIS (Netherlands)

    Veldman, Irma

    2009-01-01

    Probabilistic XML (PXML) files resulting from data integration can become extremely large, which is undesired. For XML there are several techniques available to compress the document and since probabilistic XML is in fact (a special form of) XML, it might benefit from these methods even more. In

  1. A methodology for software documentation

    OpenAIRE

    Torres Júnior, Roberto Dias; Ahlert, Hubert

    2000-01-01

    With the growing complexity of window based software and the use of object-oriented, the development of software is getting more complex than ever. Based on that, this article intends to present a methodology for software documentation and to analyze our experience and how this methodology can aid the software maintenance

  2. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  3. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    L.L. Swanson

    2005-01-01

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F andOR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of

  4. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Roy, S.

    2004-01-01

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F andOR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures

  5. Areva - 2011 Reference document; Areva - Document de reference 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    After having indicated the person responsible of this document and the legal account auditors, and provided some financial information, this document gives an overview of the different risk factors existing in the company: law risks, industrial and environmental risks, operational risks, risks related to large projects, market and liquidity risks. Then, after having recalled the history and evolution of the company and the evolution of its investments over the last five years, it proposes an overview of Areva's activities on the markets of nuclear energy and renewable energies, of its clients and suppliers, of its strategy, of the activities of its different departments. Other information are provided: company's flow chart, estate properties (plants, equipment), an analysis of its financial situation, its research and development policy, the present context, profit previsions or estimations, management organization and operation

  6. Lifecycle management for nuclear engineering project documents

    International Nuclear Information System (INIS)

    Zhang Li; Zhang Ming; Zhang Ling

    2010-01-01

    The nuclear engineering project documents with great quantity and various types of data, in which the relationships of each document are complex, the edition of document update frequently, are managed difficultly. While the safety of project even the nuclear safety is threatened seriously by the false documents and mistakes. In order to ensure the integrality, veracity and validity of project documents, the lifecycle theory of document is applied to build documents center, record center, structure and database of document lifecycle management system. And the lifecycle management is used to the documents of nuclear engineering projects from the production to pigeonhole, to satisfy the quality requirement of nuclear engineering projects. (authors)

  7. Goal-oriented rectification of camera-based document images.

    Science.gov (United States)

    Stamatopoulos, Nikolaos; Gatos, Basilis; Pratikakis, Ioannis; Perantonis, Stavros J

    2011-04-01

    Document digitization with either flatbed scanners or camera-based systems results in document images which often suffer from warping and perspective distortions that deteriorate the performance of current OCR approaches. In this paper, we present a goal-oriented rectification methodology to compensate for undesirable document image distortions aiming to improve the OCR result. Our approach relies upon a coarse-to-fine strategy. First, a coarse rectification is accomplished with the aid of a computationally low cost transformation which addresses the projection of a curved surface to a 2-D rectangular area. The projection of the curved surface on the plane is guided only by the textual content's appearance in the document image while incorporating a transformation which does not depend on specific model primitives or camera setup parameters. Second, pose normalization is applied on the word level aiming to restore all the local distortions of the document image. Experimental results on various document images with a variety of distortions demonstrate the robustness and effectiveness of the proposed rectification methodology using a consistent evaluation methodology that encounters OCR accuracy and a newly introduced measure using a semi-automatic procedure.

  8. Wilmar joint market model, Documentation

    International Nuclear Information System (INIS)

    Meibom, P.; Larsen, Helge V.; Barth, R.; Brand, H.; Weber, C.; Voll, O.

    2006-01-01

    The Wilmar Planning Tool is developed in the project Wind Power Integration in Liberalised Electricity Markets (WILMAR) supported by EU (Contract No. ENK5-CT-2002-00663). A User Shell implemented in an Excel workbook controls the Wilmar Planning Tool. All data are contained in Access databases that communicate with various sub-models through text files that are exported from or imported to the databases. The Joint Market Model (JMM) constitutes one of these sub-models. This report documents the Joint Market model (JMM). The documentation describes: 1. The file structure of the JMM. 2. The sets, parameters and variables in the JMM. 3. The equations in the JMM. 4. The looping structure in the JMM. (au)

  9. Consultation document Energy Market Concentrations

    International Nuclear Information System (INIS)

    De Maa, J.; Van Gemert, M.; Karel, A.; La Bastide, G.; Giesbertz, P.; Buijs, F.; Vermeulen, M.; Beusmans, P.

    2006-06-01

    This the second consultation document of the Netherlands Competition Authority (NMa) on the title subject (the first was in 2002). The purpose of the consultation is to involve all the relevant and interested parties in the development of the energy market in the Netherlands and to consult those parties on studies that have been carried out by the NMa so far: (1) defining (possible) relevant markets in the electricity sector, and (2) the vision and opinion of the NMa with respect to mergers and take-overs. Also, the consultation document is a contribution to the response of the letter from the Dutch Minister of Economic Affairs of May 2005 in which the NMa was requested to give an overview of the preconditions with regard to competition and it's legal aspects [nl

  10. Endangered Language Documentation and Transmission

    Directory of Open Access Journals (Sweden)

    D. Victoria Rau

    2007-01-01

    Full Text Available This paper describes an on-going project on digital archiving Yami language documentation (http://www.hrelp.org/grants/projects/index.php?projid=60. We present a cross-disciplinary approach, involving computer science and applied linguistics, to document the Yami language and prepare teaching materials. Our discussion begins with an introduction to an integrated framework for archiving, processing and developing learning materials for Yami (Yang and Rau 2005, followed by a historical account of Yami language teaching, from a grammatical syllabus (Dong and Rau 2000b to a communicative syllabus using a multimedia CD as a resource (Rau et al. 2005, to the development of interactive on-line learning based on the digital archiving project. We discuss the methods used and challenges of each stage of preparing Yami teaching materials, and present a proposal for rethinking pedagogical models for e-learning.

  11. Fuel Handling Facility Description Document

    International Nuclear Information System (INIS)

    M.A. LaFountain

    2005-01-01

    The purpose of the facility description document (FDD) is to establish the requirements and their bases that drive the design of the Fuel Handling Facility (FHF) to allow the design effort to proceed to license application. This FDD is a living document that will be revised at strategic points as the design matures. It identifies the requirements and describes the facility design as it currently exists, with emphasis on design attributes provided to meet the requirements. This FDD was developed as an engineering tool for design control. Accordingly, the primary audience and users are design engineers. It leads the design process with regard to the flow down of upper tier requirements onto the facility. Knowledge of these requirements is essential to performing the design process. It trails the design with regard to the description of the facility. This description is a reflection of the results of the design process to date

  12. Documentation requirements for radiation sterilization

    DEFF Research Database (Denmark)

    Miller, A.

    1995-01-01

    Several standards are recently approved or are under development by the standard organizations ISO and CEN in the field of radiation sterilization. Particularly in Europe these standards define new requirements on some issues and on other issues they emphasize the necessary documentation for appr......Several standards are recently approved or are under development by the standard organizations ISO and CEN in the field of radiation sterilization. Particularly in Europe these standards define new requirements on some issues and on other issues they emphasize the necessary documentation...... for approval of radiation sterilized products. The impact of these standards on the radiation sterilization is discussed, with special attention given to a few special issues, mainly traceability and uncertainty of measurement results....

  13. Wilmar joint market model, Documentation

    Energy Technology Data Exchange (ETDEWEB)

    Meibom, P.; Larsen, Helge V. [Risoe National Lab. (Denmark); Barth, R.; Brand, H. [IER, Univ. of Stuttgart (Germany); Weber, C.; Voll, O. [Univ. of Duisburg-Essen (Germany)

    2006-01-15

    The Wilmar Planning Tool is developed in the project Wind Power Integration in Liberalised Electricity Markets (WILMAR) supported by EU (Contract No. ENK5-CT-2002-00663). A User Shell implemented in an Excel workbook controls the Wilmar Planning Tool. All data are contained in Access databases that communicate with various sub-models through text files that are exported from or imported to the databases. The Joint Market Model (JMM) constitutes one of these sub-models. This report documents the Joint Market model (JMM). The documentation describes: 1. The file structure of the JMM. 2. The sets, parameters and variables in the JMM. 3. The equations in the JMM. 4. The looping structure in the JMM. (au)

  14. Gaz de France. Source document

    International Nuclear Information System (INIS)

    2005-01-01

    This document was issued by Gaz de France, the French gas utility, at the occasion of the opening of the capital of the company. It is intended to shareholders and presents some informations relative to the stocks admitted to Euronext's Eurolist, some general informations about the company and its capital, some informations about the activities of Gaz de France group, about its financial situation and results, about its management, and about its recent evolution and future perspectives. (J.S.)

  15. Extractive Summarisation of Medical Documents

    OpenAIRE

    Abeed Sarker; Diego Molla; Cecile Paris

    2012-01-01

    Background Evidence Based Medicine (EBM) practice requires practitioners to extract evidence from published medical research when answering clinical queries. Due to the time-consuming nature of this practice, there is a strong motivation for systems that can automatically summarise medical documents and help practitioners find relevant information. Aim The aim of this work is to propose an automatic query-focused, extractive summarisation approach that selects informative sentences from medic...

  16. Unsupervised Document Embedding With CNNs

    OpenAIRE

    Liu, Chundi; Zhao, Shunan; Volkovs, Maksims

    2017-01-01

    We propose a new model for unsupervised document embedding. Leading existing approaches either require complex inference or use recurrent neural networks (RNN) that are difficult to parallelize. We take a different route and develop a convolutional neural network (CNN) embedding model. Our CNN architecture is fully parallelizable resulting in over 10x speedup in inference time over RNN models. Parallelizable architecture enables to train deeper models where each successive layer has increasin...

  17. Indian Language Document Analysis and Understanding

    Indian Academy of Sciences (India)

    documents would contain text of more than one script (for example, English, Hindi and the ... O'Gorman and Govindaraju provides a good overview on document image ... word level in bilingual documents containing Roman and Tamil scripts.

  18. Documentation for the Waste Reduction Model (WARM)

    Science.gov (United States)

    This page describes the WARM documentation files and provides links to all documentation files associated with EPA’s Waste Reduction Model (WARM). The page includes a brief summary of the chapters documenting the greenhouse gas emission and energy factors.

  19. Radiation exposure from incorporated isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Beleznay, F [Hungarian Academy of Sciences, Budapest. Central Research Inst. for Physics

    1985-01-01

    Recommendations for the limitation of the burden of the human body from radiation exposure were developed to avoid direct radiation health damage such that the occurrence of stochastic damage can be held below a resonable risk level. The recommendations, published under ICRP 26 and ICRP 30, contain several guidelines and concepts which are discussed here. They include the primary internal dose exposure limits, secondary and implied limits for the monitoring of internal radiation exposure (Annual Limit of Intake, Derived Air Concentrations). Methods are presented for inspection and monitoring of internal exposure in medical laboratories, inspection of incorporation of sup(131)I and sup(99m)Tc.

  20. EDF group - Reference Document 2007

    International Nuclear Information System (INIS)

    2008-01-01

    The EDF Group is a leading player in the European energy industry, active in all areas of the electricity value chain, from generation to trading and network management. The leader in the French electricity market, the Group also has solid positions in the United Kingdom, Germany and Italy, with a portfolio of 38.5 million European customers and a generation fleet which is unique in the world. It intends to play a major role in the global revival of nuclear and is increasingly active in the gas chain. The Group has a sound business model, evenly balanced between regulated and deregulated activities. Given its R and D capability, its track record and expertise in nuclear, fossil-fired and hydro generation and in renewable energies, together with its energy eco-efficiency offers, EDF is well placed to deliver competitive solutions to reconcile sustainable economic growth and climate preservation. This document is EDF Group's Reference Document and Annual Financial Report for the year 2007. It contains information about Group profile, governance, business, investments, property, plant and equipment, management, financial position, human resources, shareholders, etc. The document includes the 2008 half-year financial report and consolidated financial statements, and the report drafted by the Statutory Auditors

  1. Vision document Energy Market Concentrations

    International Nuclear Information System (INIS)

    De Maa, J.; Van Gemert, M.; Giesbertz, P.; Vermeulen, M.; Beusmans, P.; Te Velthuis, M.; Drahos, M.

    2006-11-01

    June 2006 the second consultation document of the Netherlands Competition Authority (NMa) on the title subject (the first was in 2002) was published. The purpose of the consultation is to involve all the relevant and interested parties in the development of the energy market in the Netherlands and to consult those parties on studies that have been carried out by the NMa so far: (1) defining (possible) relevant markets in the electricity sector, and (2) the vision and opinion of the NMa with respect to mergers and take-overs. Also, the consultation document is a contribution to the response of the letter from the Dutch Minister of Economic Affairs of May 2005 in which the NMa was requested to give an overview of the preconditions with regard to competition and it's legal aspects. In this vision document all the relevant parties and stakeholders are informed about the development of energy markets in the Netherlands and abroad. Also an overview is given of the reactions from many stakeholders, involved and interested parties. [nl

  2. Waste Management System Requirement document

    International Nuclear Information System (INIS)

    1990-04-01

    This volume defines the top level technical requirements for the Monitored Retrievable Storage (MRS) facility. It is designed to be used in conjunction with Volume 1, General System Requirements. Volume 3 provides a functional description expanding the requirements allocated to the MRS facility in Volume 1 and, when appropriate, elaborates on requirements by providing associated performance criteria. Volumes 1 and 3 together convey a minimum set of requirements that must be satisfied by the final MRS facility design without unduly constraining individual design efforts. The requirements are derived from the Nuclear Waste Policy Act of 1982 (NWPA), the Nuclear Waste Policy Amendments Act of 1987 (NWPAA), the Environmental Protection Agency's (EPA) Environmental Standards for the Management and Disposal of Spent Nuclear Fuel (40 CFR 191), NRC Licensing Requirements for the Independent Storage of Spent Nuclear and High-Level Radioactive Waste (10 CFR 72), and other federal statutory and regulatory requirements, and major program policy decisions. This document sets forth specific requirements that will be fulfilled. Each subsequent level of the technical document hierarchy will be significantly more detailed and provide further guidance and definition as to how each of these requirements will be implemented in the design. Requirements appearing in Volume 3 are traceable into the MRS Design Requirements Document. Section 2 of this volume provides a functional breakdown for the MRS facility. 1 tab

  3. Review Document: Full Software Trigger

    CERN Document Server

    Albrecht, J; Raven, G

    2014-01-01

    This document presents a trigger system for the upgraded LHCb detector, scheduled to begin operation in 2020. This document serves as input for the internal review towards the "DAQ, online and trigger TDR". The proposed trigger system is implemented entirely in software. In this document we show that track reconstruction of a similar quality to that available in the offline algorithms can be performed on the full inelastic $pp$-collision rate, without prior event selections implemented in custom hardware and without relying upon a partial event reconstruction. A track nding eciency of 98.8 % relative to oine can be achieved for tracks with $p_T >$ 500 MeV/$c$. The CPU time required for this reconstruction is about 40 % of the available budget. Proof-of-principle selections are presented which demonstrate that excellent performance is achievable using an inclusive beauty trigger, in addition to exclusive beauty and charm triggers. Finally, it is shown that exclusive beauty and charm selections that do not intr...

  4. Mixed waste characterization reference document

    International Nuclear Information System (INIS)

    1997-09-01

    Waste characterization and monitoring are major activities in the management of waste from generation through storage and treatment to disposal. Adequate waste characterization is necessary to ensure safe storage, selection of appropriate and effective treatment, and adherence to disposal standards. For some wastes characterization objectives can be difficult and costly to achieve. The purpose of this document is to evaluate costs of characterizing one such waste type, mixed (hazardous and radioactive) waste. For the purpose of this document, waste characterization includes treatment system monitoring, where monitoring is a supplement or substitute for waste characterization. This document establishes a cost baseline for mixed waste characterization and treatment system monitoring requirements from which to evaluate alternatives. The cost baseline established as part of this work includes costs for a thermal treatment technology (i.e., a rotary kiln incinerator), a nonthermal treatment process (i.e., waste sorting, macronencapsulation, and catalytic wet oxidation), and no treatment (i.e., disposal of waste at the Waste Isolation Pilot Plant (WIPP)). The analysis of improvement over the baseline includes assessment of promising areas for technology development in front-end waste characterization, process equipment, off gas controls, and monitoring. Based on this assessment, an ideal characterization and monitoring configuration is described that minimizes costs and optimizes resources required for waste characterization

  5. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    L.L. Swanson

    2005-04-06

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts

  6. Document image retrieval through word shape coding.

    Science.gov (United States)

    Lu, Shijian; Li, Linlin; Tan, Chew Lim

    2008-11-01

    This paper presents a document retrieval technique that is capable of searching document images without OCR (optical character recognition). The proposed technique retrieves document images by a new word shape coding scheme, which captures the document content through annotating each word image by a word shape code. In particular, we annotate word images by using a set of topological shape features including character ascenders/descenders, character holes, and character water reservoirs. With the annotated word shape codes, document images can be retrieved by either query keywords or a query document image. Experimental results show that the proposed document image retrieval technique is fast, efficient, and tolerant to various types of document degradation.

  7. 13. Project Management Documentation and Communications

    DEFF Research Database (Denmark)

    Kampf, Constance Elizabeth

    2014-01-01

    This chapter discusses the relationship between documentation and communication practices in organizational contexts.......This chapter discusses the relationship between documentation and communication practices in organizational contexts....

  8. Rapid Exploitation and Analysis of Documents

    Energy Technology Data Exchange (ETDEWEB)

    Buttler, D J; Andrzejewski, D; Stevens, K D; Anastasiu, D; Gao, B

    2011-11-28

    Analysts are overwhelmed with information. They have large archives of historical data, both structured and unstructured, and continuous streams of relevant messages and documents that they need to match to current tasks, digest, and incorporate into their analysis. The purpose of the READ project is to develop technologies to make it easier to catalog, classify, and locate relevant information. We approached this task from multiple angles. First, we tackle the issue of processing large quantities of information in reasonable time. Second, we provide mechanisms that allow users to customize their queries based on latent topics exposed from corpus statistics. Third, we assist users in organizing query results, adding localized expert structure over results. Forth, we use word sense disambiguation techniques to increase the precision of matching user generated keyword lists with terms and concepts in the corpus. Fifth, we enhance co-occurrence statistics with latent topic attribution, to aid entity relationship discovery. Finally we quantitatively analyze the quality of three popular latent modeling techniques to examine under which circumstances each is useful.

  9. Shoulder dystocia: management and documentation.

    Science.gov (United States)

    Stitely, Michael L; Gherman, Robert B

    2014-06-01

    Shoulder dystocia is an obstetric emergency that occurs when the fetal shoulders become impacted at the pelvic inlet. Management is based on performing maneuvers to alleviate this impaction. A number of protocols and training mnemonics have been developed to assist in managing shoulder dystocia when it occurs. This article reviews the evidence regarding the performance, timing, and sequence of these maneuvers; reviews the mechanism of fetal injury in relation to shoulder dystocia; and discusses issues concerning documentation of the care provided during this obstetric emergency. Copyright © 2014 Elsevier Inc. All rights reserved.

  10. Areva reference document 2007; Areva document de reference 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This reference document contains information on the AREVA group's objectives, prospects and development strategies, particularly in Chapters 4 and 7. It contains also information on the markets, market shares and competitive position of the AREVA group. Content: 1 - Person responsible for the reference document and persons responsible for auditing the financial statements; 2 - Information pertaining to the transaction (not applicable); 3 - General information on the company and its share capital: Information on Areva, Information on share capital and voting rights, Investment certificate trading, Dividends, Organization chart of AREVA group companies, Equity interests, Shareholders' agreements; 4 - Information on company operations, new developments and future prospects: Overview and strategy of the AREVA group, The Nuclear Power and Transmission and Distribution markets, The energy businesses of the AREVA group, Front End division, Reactors and Services division, Back End division, Transmission and Distribution division, Major contracts 140 Principal sites of the AREVA group, AREVA's customers and suppliers, Sustainable Development and Continuous Improvement, Capital spending programs, Research and Development programs, Intellectual Property and Trademarks, Risk and insurance; 5 - Assets financial position financial performance: Analysis of and comments on the group's financial position and performance, Human Resources report, Environmental report, Consolidated financial statements 2007, Notes to the consolidated financial statements, Annual financial statements 2007, Notes to the corporate financial statements; 6 - Corporate governance: Composition and functioning of corporate bodies, Executive compensation, Profit-sharing plans, AREVA Values Charter, Annual Ordinary General Meeting of Shareholders of April 17, 2008; 7 - Recent developments and future prospects: Events subsequent to year-end closing for 2007, Outlook; Glossary; table of concordance.

  11. Areva, reference document 2006; Areva, document de reference 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This reference document contains information on the AREVA group's objectives, prospects and development strategies, particularly in Chapters 4 and 7. It contains information on the markets, market shares and competitive position of the AREVA group. Content: - 1 Person responsible for the reference document and persons responsible for auditing the financial statements; - 2 Information pertaining to the transaction (Not applicable); - 3 General information on the company and its share capital: Information on AREVA, on share capital and voting rights, Investment certificate trading, Dividends, Organization chart of AREVA group companies, Equity interests, Shareholders' agreements; - 4 Information on company operations, new developments and future prospects: Overview and strategy of the AREVA group, The Nuclear Power and Transmission and Distribution markets, The energy businesses of the AREVA group, Front End division, Reactors and Services division, Back End division, Transmission and Distribution division, Major contracts, The principal sites of the AREVA group, AREVA's customers and suppliers, Sustainable Development and Continuous Improvement, Capital spending programs, Research and development programs, intellectual property and trademarks, Risk and insurance; - 5 Assets - Financial position - Financial performance: Analysis of and comments on the group's financial position and performance, 2006 Human Resources Report, Environmental Report, Consolidated financial statements, Notes to the consolidated financial statements, AREVA SA financial statements, Notes to the corporate financial statements; 6 - Corporate Governance: Composition and functioning of corporate bodies, Executive compensation, Profit-sharing plans, AREVA Values Charter, Annual Combined General Meeting of Shareholders of May 3, 2007; 7 - Recent developments and future prospects: Events subsequent to year-end closing for 2006, Outlook; 8 - Glossary; 9 - Table of concordance.

  12. Areva reference document 2007; Areva document de reference 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This reference document contains information on the AREVA group's objectives, prospects and development strategies, particularly in Chapters 4 and 7. It contains also information on the markets, market shares and competitive position of the AREVA group. Content: 1 - Person responsible for the reference document and persons responsible for auditing the financial statements; 2 - Information pertaining to the transaction (not applicable); 3 - General information on the company and its share capital: Information on Areva, Information on share capital and voting rights, Investment certificate trading, Dividends, Organization chart of AREVA group companies, Equity interests, Shareholders' agreements; 4 - Information on company operations, new developments and future prospects: Overview and strategy of the AREVA group, The Nuclear Power and Transmission and Distribution markets, The energy businesses of the AREVA group, Front End division, Reactors and Services division, Back End division, Transmission and Distribution division, Major contracts 140 Principal sites of the AREVA group, AREVA's customers and suppliers, Sustainable Development and Continuous Improvement, Capital spending programs, Research and Development programs, Intellectual Property and Trademarks, Risk and insurance; 5 - Assets financial position financial performance: Analysis of and comments on the group's financial position and performance, Human Resources report, Environmental report, Consolidated financial statements 2007, Notes to the consolidated financial statements, Annual financial statements 2007, Notes to the corporate financial statements; 6 - Corporate governance: Composition and functioning of corporate bodies, Executive compensation, Profit-sharing plans, AREVA Values Charter, Annual Ordinary General Meeting of Shareholders of April 17, 2008; 7 - Recent developments and future prospects: Events subsequent to year-end closing for 2007, Outlook; Glossary; table of

  13. Areva, reference document 2006; Areva, document de reference 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This reference document contains information on the AREVA group's objectives, prospects and development strategies, particularly in Chapters 4 and 7. It contains information on the markets, market shares and competitive position of the AREVA group. Content: - 1 Person responsible for the reference document and persons responsible for auditing the financial statements; - 2 Information pertaining to the transaction (Not applicable); - 3 General information on the company and its share capital: Information on AREVA, on share capital and voting rights, Investment certificate trading, Dividends, Organization chart of AREVA group companies, Equity interests, Shareholders' agreements; - 4 Information on company operations, new developments and future prospects: Overview and strategy of the AREVA group, The Nuclear Power and Transmission and Distribution markets, The energy businesses of the AREVA group, Front End division, Reactors and Services division, Back End division, Transmission and Distribution division, Major contracts, The principal sites of the AREVA group, AREVA's customers and suppliers, Sustainable Development and Continuous Improvement, Capital spending programs, Research and development programs, intellectual property and trademarks, Risk and insurance; - 5 Assets - Financial position - Financial performance: Analysis of and comments on the group's financial position and performance, 2006 Human Resources Report, Environmental Report, Consolidated financial statements, Notes to the consolidated financial statements, AREVA SA financial statements, Notes to the corporate financial statements; 6 - Corporate Governance: Composition and functioning of corporate bodies, Executive compensation, Profit-sharing plans, AREVA Values Charter, Annual Combined General Meeting of Shareholders of May 3, 2007; 7 - Recent developments and future prospects: Events subsequent to year-end closing for 2006, Outlook; 8 - Glossary; 9 - Table of concordance.

  14. GAUDI-Architecture design document

    CERN Document Server

    Mato, P

    1998-01-01

    98-064 This document is the result of the architecture design phase for the LHCb event data processing applications project. The architecture of the LHCb software system includes its logical and physical structure which has been forged by all the strategic and tactical decisions applied during development. The strategic decisions should be made explicitly with the considerations for the trade-off of each alternative. The other purpose of this document is that it serves as the main material for the scheduled architecture review that will take place in the next weeks. The architecture review will allow us to identify what are the weaknesses or strengths of the proposed architecture as well as we hope to obtain a list of suggested changes to improve it. All that well before the system is being realized in code. It is in our interest to identify the possible problems at the architecture design phase of the software project before much of the software is implemented. Strategic decisions must be cross checked caref...

  15. EDF group - Reference Document 2005

    International Nuclear Information System (INIS)

    2006-01-01

    The EDF Group is an integrated energy supplier operating in a wide range of electricity-related businesses: generation, transmission, distribution, sale and trading of energy. It is the main operator in the French electricity market and one of the leading electricity groups in Europe. With an installed capacity of 130.8 GW (123.9 GW in Europe), it contributes to the supply of energy and services to more than 40 million customers throughout the world (with approximately 36.7 million customers in Europe, more than 28 million of whom are in France). The EDF Group has built a business model balanced between deregulated and regulated operations in France and an international presence. In 2005, the Group recorded consolidated sales of euros 51,051 million, net income (Group share) of euros 3,242 million, and it achieved earnings before interests, taxes, depreciation and amortization of euros 13,010 million. This document is EDF Group's Reference Document for the year 2005. It contains information about: the Group activities, risk factors, Business Overview, Organizational Structure, Property, Plants and Equipment, Operating and Financial Review, Capital Resources, Research and Development, Patents and Licences, Trend Information, Financial Prospects, Administrative, Management, and Supervisory Bodies and Senior Management, Remuneration and Benefits, Board Practices, Employees/Human Resources, Major Shareholders, Related Party Transactions, Financial Information Concerning the Company's Assets and Liabilities, Financial Position and Profits and Losses, Material Contracts, Information on Holdings etc

  16. SRS ECOLOGY ENVIRONMENTAL INFORMATION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    Wike, L; Doug Martin, D; Eric Nelson, E; Nancy Halverson, N; John Mayer, J; Michael Paller, M; Rodney Riley, R; Michael Serrato, M

    2006-03-01

    The SRS Ecology Environmental Information Document (EEID) provides a source of information on the ecology of Savannah River Site (SRS). The SRS is a U.S. Department of Energy (DOE)--owned property on the upper Atlantic Coastal Plain of South Carolina, centered approximately 40 kilometers (25 miles) southeast of Augusta, Georgia. The entire site was designated a National Environmental Research Park in 1972 by the Atomic Energy Commission, the predecessor of DOE. This document summarizes and synthesizes ecological research and monitoring conducted on the three main types of ecosystems found at SRS: terrestrial, wetland and aquatic. It also summarizes the available information on the threatened and endangered species found on the Savannah River Site. SRS is located along the Savannah River and encompasses an area of 80,267 hectares (310 square miles) in three South Carolina counties. It contains diverse habitats, flora, and fauna. Habitats include upland terrestrial areas, wetlands, streams, reservoirs, and the adjacent Savannah River. These diverse habitats support a variety of plants and animals, including many commercially or recreationally valuable species and several rare, threatened, or endangered species. Soils are the basic terrestrial resource, influencing the development of terrestrial biological communities. Many different soils exist on the SRS, from hydric to well-drained, and from sand to clay. In general, SRS soils are predominantly well-drained loamy sands.

  17. HEALTH AND ENVIRONMENTAL EFFECTS DOCUMENT ...

    Science.gov (United States)

    Health and Environmental Effects Documents (HEEDS) are prepared for the Office of Solid Waste and Emergency Response (OSWER). This document series is intended to support listings under the Resource Conservation and Recovery Act (RCRA) as well as to provide health-related limits and goals for emergency and remedial actions under the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA). Both published literature and information obtained from Agency Program Office files are evaluated as they pertain to potential human health, aquatic life and environmental effects of hazardous waste constituents. Several quantitative estimates are presented provided sufficient data are available. For systemic toxicants, these include Reference Doses (RfDs) for chronic and subchronic exposures for both the inhalation and oral exposures. In the case of suspected carcinogens, RfDs may not be estimated. Instead, a carcinogenic potency factor, or q1*, is provided. These potency estimates are derived for both oral and inhalation exposures where possible. In addition, unit risk estimates for air and drinking water are presented based on inhalation and oral data, respectively. Reportable quantities (RQs) based on both chronic toxicity and carcinogenicity are derived. The RQ is used to determine the quantity of a hazardous substance for which notification is required in the event of a release as specified under CERCLA.

  18. EDF group - Reference Document 2004

    International Nuclear Information System (INIS)

    2005-01-01

    The EDF Group is an integrated energy supplier operating in a wide range of electricity-related businesses: generation, transmission, distribution, sale and trading of energy. It is the main operator in the French electricity market and one of the leading electricity groups in Europe. With an installed capacity of 125,4 GW, it contributes to the supply of energy and services to more than 42 million customers throughout the world (with approximately 36 million customers in Europe, more than 28 million of whom are in France). The EDF Group has built a business model balanced between deregulated and regulated operations in France and an international presence. In 2004, the Group recorded consolidated sales of euros 46,928 million, net income (Group share) of euros 1,341 million, and it achieved earnings before interests, taxes, depreciation and amortization of euros 12,127 million. This document is EDF Group's Reference Document for the year 2004. It contains information about: the Group activities, capital, relations with Gaz de France utility, strategy, industrial environment, history, activity in France, international activity, transverse activities and functions, disputes, arbitration and risk factors, Property, Plants and Equipment, Operating and Financial Review, Administrative, Management, and Supervisory Bodies and Senior Management, Remuneration and Benefits, recent trends and perspectives

  19. Documentation design for probabilistic risk assessment

    International Nuclear Information System (INIS)

    Parkinson, W.J.; von Herrmann, J.L.

    1985-01-01

    This paper describes a framework for documentation design of probabilistic risk assessment (PRA) and is based on the EPRI document NP-3470 ''Documentation Design for Probabilistic Risk Assessment''. The goals for PRA documentation are stated. Four audiences are identified which PRA documentation must satisfy, and the documentation consistent with the needs of the various audiences are discussed, i.e., the Summary Report, the Executive Summary, the Main Report, and Appendices. The authors recommend the documentation specifications discussed herein as guides rather than rigid definitions

  20. Numeral Incorporation in Japanese Sign Language

    Science.gov (United States)

    Ktejik, Mish

    2013-01-01

    This article explores the morphological process of numeral incorporation in Japanese Sign Language. Numeral incorporation is defined and the available research on numeral incorporation in signed language is discussed. The numeral signs in Japanese Sign Language are then introduced and followed by an explanation of the numeral morphemes which are…

  1. Incorporating other texts: Intertextuality in Malaysian CSR reports

    Directory of Open Access Journals (Sweden)

    Kumaran Rajandran

    2016-11-01

    Full Text Available In Malaysia, corporate social responsibility (CSR is relatively new but corporations have been required to engage in and disclose their CSR. A typical genre for disclosure is CSR reports and these reports often refer to other texts. The article investigates the act of referencing to other texts or intertextuality in Malaysian CSR reports. It creates an archive of CEO Statements and Environment Sections in CSR reports and studies the archive for keywords, which can identify the incorporated texts. The function of these texts is examined in relation to Malaysia’s corporate context. CSR reports contain explicit references to documents (policies, regulations, reports, research, standards and to individuals/groups (CEOs, stakeholders, expert organizations. The incorporated texts display variation in corporate control, which organizes these texts along an intertextual cline. The cline helps to identify corporate and non-corporate sources among the texts. The selection of incorporated texts may reflect government and stock exchange demands. The texts are not standardized and are relevant for the CSR domain and corporations, where these texts monitor and justify CSR performance. Yet, the incorporated texts may perpetuate inexact reporting because corporations select the texts and the parts of texts to refer to. Since these texts have been employed to scrutinize initiatives and results, CSR reports can claim to represent the “truth” about a corporation’s CSR. Hence, intertextuality serves corporate interests.

  2. Wilmar Planning Tool, VBA documentation

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Helge V.

    2006-01-15

    This is a documentation of the VBA (Visual Basic for Applications) in the Wilmar Planning Tool. VBA is used in the Wilmar User Shell (an Excel workbook) and in the three Access databases that hold input, scenario and output data. The Wilmar Planning Tool is developed in the project Wind Power Integration in Liberalised Electricity Markets (WILMAR) supported by EU (contract ENK5-CT-2002-00663). The User Shell controls the operation of the Wilmar Planning Tool. In the User Shell various control parameters are set, and then a macro in the Input Database is run that writes input files for the Joint market Model and the Long Term Model. Afterwards these models can be started from the User Shell. Finally, the User Shell can start a macro in the Output Database that imports the output files from the models. (LN)

  3. Guión Documental

    OpenAIRE

    Pancorbo, Juan Manuel

    2015-01-01

    La industria audiovisual en Andalucía muestra un vigor alto a pesar de la crisis económica y de la reducción de la financiación pública para los productos cinematográficos. Sin embargo, sí que existe un campo del sector audiovisual que ha tenido un incremento significativo, como es el caso de los documentales. El proceso de creación, gestión y elaboración de un guión documental tiene unos pasos específicos que lo hacen singular y que exige la necesidad de que los participantes sigan una serie...

  4. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    J.F. Beesley

    2005-04-21

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

  5. PORFLOW TESTING AND VERIFICATION DOCUMENT

    International Nuclear Information System (INIS)

    Aleman, S

    2007-01-01

    The PORFLOW software package is a comprehensive mathematical model for simulation of multi-phase fluid flow, heat transfer and mass transport in variably saturated porous and fractured media. PORFLOW can simulate transient or steady-state problems in Cartesian or cylindrical geometry. The porous medium may be anisotropic and heterogeneous and may contain discrete fractures or boreholes with the porous matrix. The theoretical models within the code provide a unified treatment of concepts relevant to fluid flow and transport. The main features of PORFLOW that are relevant to Performance Assessment modeling at the Savannah River National Laboratory (SRNL) include variably saturated flow and transport of parent and progeny radionuclides. This document involves testing a relevant sample of problems in PORFLOW and comparing the outcome of the simulations to analytical solutions or other commercial codes. The testing consists of the following four groups. Group 1: Groundwater Flow; Group 2: Contaminant Transport; Group 3: Numerical Dispersion; and Group 4: Keyword Commands

  6. International document on food irradiation

    International Nuclear Information System (INIS)

    1990-06-01

    This international document highlights the major issues related to the acceptance of irradiated food by consumers, governmental and intergovernmental activities, the control of the process, and trade. The conference recognized that: Food irradiation has the potential to reduce the incidence of foodborne diseases. It can reduce post-harvest food losses and make available a larger quantity and a wider variety of foodstuffs for consumers. Regulatory control by competent authorities is a necessary prerequisite for introduction of the process. International trade in irradiated foods would be facilitated by harmonization of national procedures based on internationally recognized standards for the control of food irradiation. Acceptance of irradiated food by the consumer is a vital factor in the successful commercialization of the irradiation process, and information dissemination can contribute to this acceptance

  7. Establishment of ITER: Relevant documents

    International Nuclear Information System (INIS)

    1988-01-01

    At the Geneva Summit Meeting in November, 1985, a proposal was made by the Soviet Union to build a next-generation tokamak experiment on a collaborative basis involving the world's four major fusion blocks. In October, 1986, after consulting with Japan and the European Community, the United States responded with a proposal on how to implement such an activity. Ensuing diplomatic and technical discussions resulted in the establishment, under the auspices of the IAEA, of the International Thermonuclear Experimental Reactor Conceptual Design Activities. This tome represents a collection of all documents relating to the establishment of ITER, beginning with the initial meeting of the ITER Quadripartite Initiative Committee in Vienna on 15-16 March, 1987, through the meeting of the Provisional ITER Council, also in Vienna, on 8-9 February, 1988

  8. PSP Program close out documentation

    Energy Technology Data Exchange (ETDEWEB)

    Andringa, K.; Hootman, H.E.; Ferrara, A.S.; Smith, P.K.; Congdon, J.W.; Randolph, H.W.; Young, R.H.; Driggers, F.E.; Topp, S.V.

    1985-12-31

    In December 1982 DOE-SR directed SRL to study the feasibility and impact of a program to lower the U-236 content of the Highly Enriched Uranium (HEU) stockpile used as fuel for the SRP reactors. In response to this request SRL assessed four technologies, Atomic Vapor Laser Isotope Separation (AVLIS), Molecular Laser Isotope Separation (MLIS), Gas Centrifuge, and the Plasma Separation Process (PSP) for this purpose with the assistance of the Engineering Department. In April 1983 cost/benefit analyses for these processes, high spot cost estimates for production facilities, and process uncertainties were submitted to DOE-SR with a recommendation to proceed with the conceptual design and supporting development programs for a facility based on the use of the PSP process. The current program status for the PSP development program at SRL and the design and documentation of a production facility at SRP, referred to as the Fuel Improvement Demonstration Facility (FIDF), is described in this report.

  9. The European Utility Requirement Document

    International Nuclear Information System (INIS)

    Roche, I.I.

    1999-01-01

    The major European electricity producers work on a common requirement document for future LWR plants since 1992. They aim at requirements acceptable together by the owners, the public and the authorities. Thus the designers can develop standard LWR designs acceptable everywhere in Europe and the utilities can open their consultations to vendors on common bases. Such a standardisation promotes an improvement of generation costs and of safety : public and authorities acceptance should be improved as well ; significant savings are expected in development and construction costs. Since the early stages of the project, the EUR group has grown significantly. It now includes utilities from nine European countries. Utilities from two other European countries are joining the group. Specific cooperation agreements are also in progress with a few extra-European partners

  10. Building 894 hazards assessment document

    International Nuclear Information System (INIS)

    Banda, Z.; Williams, M.

    1996-07-01

    The Department of Energy Order 5500.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with Building 894. The entire inventory was subjected to the screening criteria for potential airborne impact to onsite and offsite individuals out of which 9 chemicals were kept for further evaluation. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distance at which a postulated facility event will produce consequences exceeding the Early Severe Health Effects threshold is 130 meters. The highest emergency classification is a General Emergency. The Emergency Planning Zone is a nominal 130 meter area that conforms to DOE boundaries and physical/jurisdictional boundaries such as fence lines and streets

  11. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Beesley. J.F.

    2005-01-01

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process

  12. Wilmar Planning Tool, VBA documentation

    International Nuclear Information System (INIS)

    Larsen, Helge V.

    2006-01-01

    This is a documentation of the VBA (Visual Basic for Applications) in the Wilmar Planning Tool. VBA is used in the Wilmar User Shell (an Excel workbook) and in the three Access databases that hold input, scenario and output data. The Wilmar Planning Tool is developed in the project Wind Power Integration in Liberalised Electricity Markets (WILMAR) supported by EU (contract ENK5-CT-2002-00663). The User Shell controls the operation of the Wilmar Planning Tool. In the User Shell various control parameters are set, and then a macro in the Input Database is run that writes input files for the Joint market Model and the Long Term Model. Afterwards these models can be started from the User Shell. Finally, the User Shell can start a macro in the Output Database that imports the output files from the models. (LN)

  13. Building 6630 hazards assessment document

    International Nuclear Information System (INIS)

    Williams, M.; Banda, Z.

    1996-10-01

    The Department of Energy Order 5500.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with Building 6630. The entire inventory was subjected to the screening criteria for potential airborne impact to onsite and offsite individuals out of which one chemical was kept for further evaluation. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the chemical release site, the atmospheric conditions, and the circumstances of the release. The greatest distance at which a postulated facility event will produce consequences exceeding the Early Severe Health Effects threshold is 76 meters. The highest emergency classification is an Alert. The Emergency Planning Zone is a nominal 100 meter area that conforms to DOE boundaries and physical/jurisdictional boundaries such as fence lines and streets

  14. EDF group - Reference Document 2006

    International Nuclear Information System (INIS)

    2007-01-01

    The EDF Group is an integrated energy supplier operating in a wide range of electricity-related businesses: generation, transmission, distribution, sale and trading of energy. It is the main operator in the French electricity market and holds strong positions in the other three principal European markets (Germany, the United Kingdom, Italy) making it one of the leading electricity groups in Europe, and a recognized actor in the gas market. With an installed capacity of 123.7 GW in Europe (128.2 GW worldwide) it holds, among the major European energy specialists, the largest production fleet and the one emitting the least CO 2 , owing to the share of nuclear technology and hydropower in its generation mix. The EDF group supplies electricity, gas and associated services to more than 37.8 million customers throughout the world and in Europe (more than 28 million of whom are in France). The EDF Group has built a business model balanced between France and the international markets, and between deregulated and regulated operations. In 2006, the Group recorded consolidated sales of euros 58,932 million, net income (Group share) of euros 5,605 million, and it achieved earnings before interest, taxes, depreciation and amortization of euros 13,930 million. From July 1, 2007, the EDF group will carry out its trading activities in a European energy market fully open to competition. This document is EDF Group's Reference Document for the year 2006. It contains information about: the Group activities, risk factors, Business overview, Organizational structure, Property, plants and equipment, Operating and financial review, Capital resources and cash flows, Research and Development, Patents and Licenses, Trend information, Financial forecasts or estimates, Administrative, management and supervisory bodies and senior management, Remuneration and benefits, Board practices, Employees/Human resources, Major shareholders, Related party transactions, Financial information

  15. Foreign patent documentation and information research

    International Nuclear Information System (INIS)

    Wang Tongsheng; Wu Xianfeng; Liu Jia; Cao Jifen; Song Tianbao; Feng Beiyuan; Zhang Baozhu

    2014-01-01

    Patent documentations are important scientific and technical documentations, which gather legal information, technical information and economic information together. According to WIPO forecasts, making full use of patent documentation can save 40% of research funding and 60% of the study period. Foreign patent documentations are the world's most valuable patent documentations, and many original technologies that have significant influence are first disclosed in foreign patent documentation. Studying and making use of foreign patent documentations can improve our starting point of scientific and technological innovation, and reduce the research investment. This paper analyzes foreign patent documentation and, combining with the actual development of nuclear technology in our country, makes specific recommendations for patent documentation research. (authors)

  16. Sandia Software Guidelines, Volume 2. Documentation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standards for software documentation, this volume provides guidance in the selection of an adequate document set for a software project and example formats for many types of software documentation. A tutorial on life cycle documentation is also provided. Extended document thematic outlines and working examples of software documents are available on electronic media as an extension of this volume.

  17. Base de datos documental gestionada con Winisis en Dropbox

    OpenAIRE

    Rueda-Vildoso, Hugo; Valenzuela-Urra, Cristian

    2014-01-01

    We describe the case of Facso, a database of the minutes and other documents of the Board of the Faculty of Social Sciences, which illustrates the integration of Unesco’s WinIsis database management system with Dropbox acting as a “virtual hard disk” on the cloud. Various routing options are shown, even incorporating the old Ms-dos .bat executable commands. This has been tested in a 64-bit version with Windows XP, Windows 7, and Windows 8 using Oracle’s Virtual Box, and on 32-bit PC desktop, ...

  18. EDF group - Reference Document 2009

    International Nuclear Information System (INIS)

    2010-01-01

    The EDF group is an integrated energy company with a presence in a wide range of electricity-related businesses: generation, transmission, distribution, supply and energy trading. It is France's leading electricity operator and has a strong position in the three other main European markets (Germany, the United Kingdom and Italy), making it one of Europe's leading electrical players as well as a recognized player in the gas industry. With worldwide installed power capacity totaling 136.3 GW as of December 31, 2009 (134.0 GW in Europe) and global energy generation of 618.5 TWh, it has the largest generating capacity of all the major European energy corporations with the lowest level of CO 2 emissions due to the significant proportion of nuclear and hydroelectric power in its generation mix. The EDF group supplies gas, electricity, and associated services to more than 37.9 million customer accounts worldwide (including approximately 27.7 million in France). The EDF group's businesses reflect its adoption of a model aimed at finding the best balance between French and international activities, competitive and regulated operations and based on an upstream-downstream integration. In 2009, the Group's consolidated revenues were euros 66.3 billion, the net income (Group share) was euros 3.9 billion, and earnings before interest, tax, depreciation and amortization was euros 17.5 billion. This document is EDF Group's Reference Document and Annual Financial Report for the year 2009. It contains information about: the Group activities, risk factors, Business, Organizational structure, Property plant and equipment, Operating and financial review, Capital resources and cash flows, Research and Development, Patents and Licenses, Information on trends, Financial outlook, Administrative, management, and supervisory bodies and senior management, Compensation and benefits, Functioning of the administration and management bodies, Employees/Human resources

  19. Automated Generation of Technical Documentation and Provenance for Reproducible Research

    Science.gov (United States)

    Jolly, B.; Medyckyj-Scott, D.; Spiekermann, R.; Ausseil, A. G.

    2017-12-01

    Data provenance and detailed technical documentation are essential components of high-quality reproducible research, however are often only partially addressed during a research project. Recording and maintaining this information during the course of a project can be a difficult task to get right as it is a time consuming and often boring process for the researchers involved. As a result, provenance records and technical documentation provided alongside research results can be incomplete or may not be completely consistent with the actual processes followed. While providing access to the data and code used by the original researchers goes some way toward enabling reproducibility, this does not count as, or replace, data provenance. Additionally, this can be a poor substitute for good technical documentation and is often more difficult for a third-party to understand - particularly if they do not understand the programming language(s) used. We present and discuss a tool built from the ground up for the production of well-documented and reproducible spatial datasets that are created by applying a series of classification rules to a number of input layers. The internal model of the classification rules required by the tool to process the input data is exploited to also produce technical documentation and provenance records with minimal additional user input. Available provenance records that accompany input datasets are incorporated into those that describe the current process. As a result, each time a new iteration of the analysis is performed the documentation and provenance records are re-generated to provide an accurate description of the exact process followed. The generic nature of this tool, and the lessons learned during its creation, have wider application to other fields where the production of derivative datasets must be done in an open, defensible, and reproducible way.

  20. Information Types in Nonmimetic Documents: A Review of Biddle's Wipe-Clean Slate (Understanding Documents).

    Science.gov (United States)

    Mosenthal, Peter B.; Kirsch, Irwin S.

    1991-01-01

    Describes how the 16 permanent lists used by a first grade reading teacher (and mother of 6) to manage the household represents the whole range of documents covered in the 3 major types of documents: matrix documents, graphic documents, and locative documents. Suggests class activities to clarify students' understanding of the information in…

  1. Surface Geophysical Exploration - Compendium Document

    International Nuclear Information System (INIS)

    Rucker, D.F.; Myers, D.A.

    2011-01-01

    This report documents the evolution of the surface geophysical exploration (SGE) program and highlights some of the most recent successes in imaging conductive targets related to past leaks within and around Hanford's tank farms. While it is noted that the SGE program consists of multiple geophysical techniques designed to (1) locate near surface infrastructure that may interfere with (2) subsurface plume mapping, the report will focus primarily on electrical resistivity acquisition and processing for plume mapping. Due to the interferences from the near surface piping network, tanks, fences, wells, etc., the results of the three-dimensional (3D) reconstruction of electrical resistivity was more representative of metal than the high ionic strength plumes. Since the first deployment, the focus of the SGE program has been to acquire and model the best electrical resistivity data that minimizes the influence of buried metal objects. Toward that goal, two significant advances have occurred: (1) using the infrastructure directly in the acquisition campaign and (2) placement of electrodes beneath the infrastructure. The direct use of infrastructure was successfully demonstrated at T farm by using wells as long electrodes (Rucker et al., 2010, 'Electrical-Resistivity Characterization of an Industrial Site Using Long Electrodes'). While the method was capable of finding targets related to past releases, a loss of vertical resolution was the trade-off. The burying of electrodes below the infrastructure helped to increase the vertical resolution, as long as a sufficient number of electrodes are available for the acquisition campaign.

  2. EASIER ACCESS TO STANDARDS DOCUMENTATION

    CERN Multimedia

    2001-01-01

    Many organizations issuing standards offer reduced prices for publications to their members. Paying a membership fee, even a site membership fee, can therefore be worthwhile - even if relatively few standards are needed. The Library is now exploring the possibility, in collaboration with the rest of the CERN community, of joining standards-issuing organizations. So why not share your costs with the rest of the organization wherever this can be done without violating copyright or access regulations? The Library now provides documentation and other member services from IPC, the Association Connecting Electronics Industries (http://www.ipc.org/html/fsabout.htm) at favourable prices for the entire CERN population. For more information, or if you are a member of any other organization which provides services which could be shared CERN-wide, please contact library.desk@cern.ch . We remind all users of international standards, that CERN has special agreements with ISO and IEC (see Bulletin 50/2000). You can order st...

  3. Relevant documents initiating the EDA

    International Nuclear Information System (INIS)

    1993-01-01

    In December 1990, the four ITER Parties successfully concluded the Conceptual Design Activities for ITER. In January, 1991, each of the Parties had decided to enter negotiations on co-operation in the ITER EDA, which are to be conducted under the auspices of the IAEA; and each Party was prepared to receive a letter of invitation from the Director General of the IAEA to participate in those negotiations. Four negotiating meetings were held in 1991, the first being in Vienna, the second in Tokyo, the third in Reston near Washington, and the fourth in Moscow. After completion of the negotiations, each of the Parties proceeded domestically to reach its decision to sign the ITER EDA Agreement and its Protocol 1. All formalities were concluded during the first half of 1992, and the EDA documents were signed in Washington on July 21, 1992. Following the signing, each of the Parties provided the Director General with the names of its two ITER Council members. With the formation of the Council, the EDA had begun. This volume contains the papers developed before the start of the EDA. It begins with the Director General's invitation to participate in the negotiations and ends with the Parties' designations of the ITER Council members. While the evolving text of the Agreement and its Protocol 1 is referred to in some of these papers as an attachment, it is only the final, signed text that is reproduced in this volume

  4. ForTrilinos Design Document

    Energy Technology Data Exchange (ETDEWEB)

    Young, Mitchell T. [ORNL; Johnson, Seth R. [ORNL; Prokopenko, Andrey V. [ORNL; Evans, Katherine J. [ORNL; Heroux, Michael A. [Sandia National Laboratories (SNL)

    2017-08-01

    With the development of a Fortran Interface to Trilinos, ForTrilinos, modelers using modern Fortran will beable to provide their codes the capability to use solvers and other capabilities on exascale machines via astraightforward infrastructure that accesses Trilinos. This document outlines what Fortrilinos does andexplains briefly how it works. We show it provides a general access to packages via an entry point and usesan xml file from fortran code. With the first release, ForTrilinos will enable Teuchos to take xml parameterlists from Fortran code and set up data structures. It will provide access to linear solvers and eigensolvers.Several examples are provided to illustrate the capabilities in practice. We explain what the user shouldhave already with their code and what Trilinos provides and returns to the Fortran code. We provideinformation about the build process for ForTrilinos, with a practical example. In future releases, nonlinearsolvers, time iteration, advanced preconditioning techniques, and inversion of control (IoC), to enablecallbacks to Fortran routines, will be available.

  5. Fossil energy program. Summary document

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-05-01

    This program summary document presents a comprehensive overview of the research, development, and demonstration (RD and D) activities that will be performed in FY 1981 by the Assistant Secretary for Fossil Energy (ASFE), US Department of Energy (DOE). The ASFE technology programs for the fossil resources of coal, petroleum (including oil shale) and gas have been established with the goal of making substantive contributions to the nation's future supply and efficienty use of energy. On April 29, 1977, the Administration submitted to Congress the National Energy Plan (NEP) and accompanying legislative proposals designed to establish a coherent energy policy structure for the United States. Congress passed the National Energy Act (NEA) on October 15, 1978, which allows implementation of the vital parts of the NEP. The NEP was supplemented by additional energy policy statements culminating in the President's address on July 15, 1979, presenting a program to further reduce dependence on imported petroleum. The passage of the NEA-related energy programs represent specific steps by the Administration and Congress to reorganize, redirect, and clarify the role of the Federal Government in the formulation and execution of national energy policy and programs. The energy technology RD and D prog4rams carried out by ASFE are an important part of the Federal Government's effort to provide the combination and amounts of energy resources needed to ensure national security and continued economic growth.

  6. NEMS integrating module documentation report

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-14

    The National Energy Modeling System (NEMS) is a computer modeling system that produces a general equilibrium solution for energy supply and demand in the US energy markets. The model achieves a supply and demand balance in the end-use demand regions, defined as the nine Census Divisions, by solving for the prices of each energy type such that the quantities producers are willing to supply equal the quantities consumers wish to consume. The system reflects market economics, industry structure, and energy policies and regulations that influence market behavior. The NEMS Integrating Module is the central integrating component of a complex modeling system. As such, a thorough understanding of its role in the modeling process can only be achieved by placing it in the proper context with respect to the other modules. To that end, this document provides an overview of the complete NEMS model, and includes brief descriptions of the modules with which the Integrating Module interacts. The emphasis and focus, however, is on the structure and function of the Integrating Module of NEMS.

  7. SURFACE GEOPHYSICAL EXPLORATION - COMPENDIUM DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    RUCKER DF; MYERS DA

    2011-10-04

    This report documents the evolution of the surface geophysical exploration (SGE) program and highlights some of the most recent successes in imaging conductive targets related to past leaks within and around Hanford's tank farms. While it is noted that the SGE program consists of multiple geophysical techniques designed to (1) locate near surface infrastructure that may interfere with (2) subsurface plume mapping, the report will focus primarily on electrical resistivity acquisition and processing for plume mapping. Due to the interferences from the near surface piping network, tanks, fences, wells, etc., the results of the three-dimensional (3D) reconstruction of electrical resistivity was more representative of metal than the high ionic strength plumes. Since the first deployment, the focus of the SGE program has been to acquire and model the best electrical resistivity data that minimizes the influence of buried metal objects. Toward that goal, two significant advances have occurred: (1) using the infrastructure directly in the acquisition campaign and (2) placement of electrodes beneath the infrastructure. The direct use of infrastructure was successfully demonstrated at T farm by using wells as long electrodes (Rucker et al., 2010, 'Electrical-Resistivity Characterization of an Industrial Site Using Long Electrodes'). While the method was capable of finding targets related to past releases, a loss of vertical resolution was the trade-off. The burying of electrodes below the infrastructure helped to increase the vertical resolution, as long as a sufficient number of electrodes are available for the acquisition campaign.

  8. [Familial combined hyperlipidemia: consensus document].

    Science.gov (United States)

    Mata, Pedro; Alonso, Rodrigo; Ruíz-Garcia, Antonio; Díaz-Díaz, Jose L; González, Noemí; Gijón-Conde, Teresa; Martínez-Faedo, Ceferino; Morón, Ignacio; Arranz, Ezequiel; Aguado, Rocío; Argueso, Rosa; Perez de Isla, Leopoldo

    2014-10-01

    Familial combined hyperlipidemia (FCH) is a frequent disorder associated with premature coronary artery disease. It is transmitted in an autosomal dominant manner, although there is not a unique gene involved. The diagnosis is performed using clinical criteria, and variability in lipid phenotype and family history of hyperlipidemia are necessaries. Frequently, the disorder is associated with type2 diabetes mellitus, arterial hypertension and central obesity. Patients with FCH are considered as high cardiovascular risk and the lipid target is an LDL-cholesterol <100mg/dL, and <70mg/dL if cardiovascular disease or type 2 diabetes are present. Patients with FCH require lipid lowering treatment using potent statins and sometimes, combined lipid-lowering treatment. Identification and management of other cardiovascular risk factors as type 2 diabetes and hypertension are fundamental to reduce cardiovascular disease burden. This document gives recommendations for the diagnosis and global treatment of patients with FCH directed to specialists and general practitioners. Copyright © 2014 Sociedad Española de Médicos de Atención Primaria (SEMERGEN). Publicado por Elsevier España. All rights reserved.

  9. Basis Document for Sludge Stabilization

    CERN Document Server

    Risenmay, H R

    2001-01-01

    DOE-RL recently issued Safety Evaluation Report (SER) amendments to the PFP Final Safety Analysis Report, HNF-SD-CP-SAR-021 Rev. 2. The Justification for Continued Operations for 2736-ZB and plutonium oxides in BTCs Safety Basis change (letter DOE-RL ABD-074) was approved by one of the SERs. Also approved by SER was the revised accident analysis for Magnesium Hydroxide Precipitation Process (MHPP) gloveboxes HC-230C-3 and HC-230C-5 containing increased glovebox inventories and corresponding increases in seismic release consequence. Numerous implementing documents require revision and issuance to implement the SER approvals. The SER plutonium oxides into BTCs specifically limited the SER scope to ''pure or clean oxides, i.e., 85 wt% or grater Pu, in this feed change'' (SER Section 3.0 Base Information paragraph 4 [page 11]). Comprehensive USQ Evaluation PFP-2001-12 addressed the packaging of Pu alloy metals into BTCs, and the packaging of Pu alloy oxides (powders) into food pack cans and determined that the ac...

  10. Mechanical flexible joint design document

    Science.gov (United States)

    Daily, Vic

    1993-01-01

    The purpose of this report is to document the status of the Mechanical Flexible Joint (MFJ) Design Subtask with the intent of halting work on the design. Recommendations for future work is included in the case that the task is to be resumed. The MFJ is designed to eliminate two failure points from the current flex joint configuration, the inner 'tripod configuration' and the outer containment jacket. The MFJ will also be designed to flex 13.5 degrees and have three degrees of freedom. By having three degrees of freedom, the MFJ will allow the Low Pressure Fuel Duct to twist and remove the necessity to angulate the full 11 degrees currently required. The current flex joints are very labor intensive and very costly and a simple alternative is being sought. The MFJ is designed with a greater angular displacement, with three degrees of freedom, to reside in the same overall envelope, to meet weight constraints of the current bellows, to be compatible with cryogenic fuel and oxidizers, and also to be man-rated.

  11. DOSCROS81. ECN Cross-Section Library for neutron dosimetry. Summary of contents and documentation

    International Nuclear Information System (INIS)

    Lemmel, H.D.

    1982-01-01

    This document summarizes the contents and documentation of the Cross Section Library DOSCROS81 (640 groups in an extended SAND-II format). The library is based on ENDF/B-5 dosimetry file, supplemented with some other evaluations. The total number of reaction cross section sets incorporated in this library is 70 (+3 cover cross section sets). The entire library can be obtained free of charge from the IAEA Nuclear Data Section. A revised version is called DOSCROS81A. (author)

  12. Honeywell modular automation system computer software documentation

    International Nuclear Information System (INIS)

    Cunningham, L.T.

    1997-01-01

    This document provides a Computer Software Documentation for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This system will be used to control new thermal stabilization furnaces in HA-21I

  13. Comparison of historical documents for writership

    Science.gov (United States)

    Ball, Gregory R.; Pu, Danjun; Stritmatter, Roger; Srihari, Sargur N.

    2010-01-01

    Over the last century forensic document science has developed progressively more sophisticated pattern recognition methodologies for ascertaining the authorship of disputed documents. These include advances not only in computer assisted stylometrics, but forensic handwriting analysis. We present a writer verification method and an evaluation of an actual historical document written by an unknown writer. The questioned document is compared against two known handwriting samples of Herman Melville, a 19th century American author who has been hypothesized to be the writer of this document. The comparison led to a high confidence result that the questioned document was written by the same writer as the known documents. Such methodology can be applied to many such questioned documents in historical writing, both in literary and legal fields.

  14. System design document for the INFLO prototype.

    Science.gov (United States)

    2014-03-01

    This report documents the high level System Design Document (SDD) for the prototype development and : demonstration of the Intelligent Network Flow Optimization (INFLO) application bundle, with a focus on the Speed : Harmonization (SPD-HARM) and Queu...

  15. Electronic Document Management Using Inverted Files System

    Science.gov (United States)

    Suhartono, Derwin; Setiawan, Erwin; Irwanto, Djon

    2014-03-01

    The amount of documents increases so fast. Those documents exist not only in a paper based but also in an electronic based. It can be seen from the data sample taken by the SpringerLink publisher in 2010, which showed an increase in the number of digital document collections from 2003 to mid of 2010. Then, how to manage them well becomes an important need. This paper describes a new method in managing documents called as inverted files system. Related with the electronic based document, the inverted files system will closely used in term of its usage to document so that it can be searched over the Internet using the Search Engine. It can improve document search mechanism and document save mechanism.

  16. Electronic Document Management Using Inverted Files System

    Directory of Open Access Journals (Sweden)

    Suhartono Derwin

    2014-03-01

    Full Text Available The amount of documents increases so fast. Those documents exist not only in a paper based but also in an electronic based. It can be seen from the data sample taken by the SpringerLink publisher in 2010, which showed an increase in the number of digital document collections from 2003 to mid of 2010. Then, how to manage them well becomes an important need. This paper describes a new method in managing documents called as inverted files system. Related with the electronic based document, the inverted files system will closely used in term of its usage to document so that it can be searched over the Internet using the Search Engine. It can improve document search mechanism and document save mechanism.

  17. Document organization by means of graphs

    Directory of Open Access Journals (Sweden)

    Santa Vallejo Figueroa

    2016-12-01

    Full Text Available Nowadays documents are the main way to represent information and knowledge in several domains. Continuously users store documents in hard disk or online media according to some personal organization based on topics, but such documents can contain one or more topics. This situation makes hard to access documents when is required. The current search engines are based on the name of file or content, but where the desired term or terms must match exactly as are in the content. In this paper, a method for organize documents by means of graphs is proposed, taking into account the topics of the documents. For this a graph for each document is generated taking into account synonyms, semantic related terms, hyponyms, and hypernyms of nouns and verbs contained in documents. The proposal have been compares against Google Desktop and LogicalDoc with interesting results.

  18. Utility Energy Services Contracts: Enabling Documents

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-05-01

    Utility Energy Services Contracts: Enabling Documents provides materials that clarify the authority for Federal agencies to enter into utility energy services contracts (UESCs), as well as sample documents and resources to ease utility partnership contracting.

  19. The Vicinity of Program Documentation Tools

    DEFF Research Database (Denmark)

    Nørmark, Kurt

    between program development tools.  In the central part of the paper we introduce a mapping of documentation flow between program development tools.  In addition we discuss a set of locally developed tools which is related to program documentation.  The use of test cases as examples in an interface......Program documentation plays a vital role in almost all programming processes.  Program documentation flows between separate tools of a modularized environment, and in between the components of an integrated development environment as well.  In this paper we discuss the flow of program documentation...... documentation tool is a noteworthy and valuable contribution to the documentation flow.  As an additional contribution we identify several circular relationships which illustrate feedback of documentation to the program editor from other tools in the development environment....

  20. Paper trails. Document management is no silver bullet, but it can patch holes as hospitals transition to paperless.

    Science.gov (United States)

    Gamble, Kate Huvane

    2009-10-01

    Hospitals are leveraging content management to ease the transition from a paper-based to electronic environment. Document management is used to scan, index and archive medical records and financial documents. Even fully integrated health systems receive outside documents such as lab results and referrals that must be incorporated into the patient record. The data in scanned documents cannot be used for trending purposes without manual work. The market for natural language processing, a tool used to extract data elements from scanned documents, could ramp up significantly in the near future.

  1. OCRWM baseline management procedure for document identifiers

    International Nuclear Information System (INIS)

    1993-03-01

    This procedure establishes a uniform numbering system (document identifier) for all Program and project technical, cost, and schedule baselines, and selected management and procurement documents developed for and controlled by the Office of Civilian Radioactive Waste Management (OCRWM) for the Civilian Radioactive Waste Management System (CRWMS). The document identifier defined in this procedure is structured to ensure that the relational integrity between configuration items (CIs) and their associated documentation and software is maintained, traceable, categorical, and retrievable for the life of the program

  2. Traceability Method for Software Engineering Documentation

    OpenAIRE

    Nur Adila Azram; Rodziah Atan

    2012-01-01

    Traceability has been widely discussed in research area. It has been one of interest topic to be research in software engineering. Traceability in software documentation is one of the interesting topics to be research further. It is important in software documentation to trace out the flow or process in all the documents whether they depends with one another or not. In this paper, we present a traceability method for software engineering documentation. The objective of this research is to fac...

  3. 10 CFR 21.31 - Procurement documents.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Procurement documents. 21.31 Section 21.31 Energy NUCLEAR REGULATORY COMMISSION REPORTING OF DEFECTS AND NONCOMPLIANCE Procurement Documents § 21.31 Procurement documents. Each individual, corporation, partnership, dedicating entity, or other entity subject to the...

  4. Technical basis document for external events

    International Nuclear Information System (INIS)

    OBERG, B.D.

    2003-01-01

    This document supports the Tank Farms Documented Safety Analysis and presents the technical basis for the FR-equencies of externally initiated accidents. The consequences of externally initiated events are discussed in other documents that correspond to the accident that was caused by the external event. The external events include aircraft crash, vehicle accident, range fire, and rail accident

  5. Spent Nuclear Fuel Project Document Management Plan

    International Nuclear Information System (INIS)

    Connor, M.D.; Harizison, G.L.; Rice, W.C.

    1995-12-01

    The SNF Project Document Management Plan identifies and describes the currently available systems and processes for implementing and maintaining an effective document control and records management program. This program governs the methods by which documents are generated, released, distributed, maintained current, retired, and ultimately disposed

  6. 10 CFR 72.152 - Document control.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Document control. 72.152 Section 72.152 Energy NUCLEAR... Document control. The licensee, applicant for a license, certificate holder, and applicant for a CoC shall establish measures to control the issuance of documents such as instructions, procedures, and drawings...

  7. 10 CFR 71.113 - Document control.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Document control. 71.113 Section 71.113 Energy NUCLEAR....113 Document control. The licensee, certificate holder, and applicant for a CoC shall establish measures to control the issuance of documents such as instructions, procedures, and drawings, including...

  8. Documenting the Earliest Chinese Journals

    Directory of Open Access Journals (Sweden)

    Jian-zhong (Joe Zhou

    2001-10-01

    Full Text Available

    頁次:19-24

    According to various authoritative sources, the English word "journal" was first used in the 16lh century, but the existence of the journal in its original meaning as a daily record can be traced back to Acta Diuma (Daily Events in ancient Roman cities as early as 59 B.C. This article documents the first appearance of Chinese daily records that were much early than 59 B.C.

    The evidence of the earlier Chinese daily records came from some important archaeological discoveries in the 1970's, but they were also documented by Sima Qian (145 B.C. - 85 B.C., the grand historian of the Han Dynasty imperial court. Sima's lifetime contribution was the publication of Shi Ji (史記 (The Grand Scribe's Records, the Records hereafter. The Records is a book of history of a grand scope. It encompasses all Chinese history from 30lh century B.C. through the end of the second century B.C. in 130 chapters and over 525,000 Chinese

  9. Civilian Radioactive Waste Management System Requirements Document

    International Nuclear Information System (INIS)

    1992-12-01

    This document specifies the top-level requirements for the Civilian Radioactive Waste Management System (CRWMS). The document is referred to herein as the CRD, for CRWMS Requirements document. The OCRWM System Engineering Management Plan (SEMP) establishes the technical document hierarchy (hierarchy of technical requirements and configuration baseline documents) for the CRWMS program. The CRD is the top-level document in this hierarchy. The immediate subordinate documents are the System Requirements Documents (SRDS) for the four elements of the CRWMS and the Interface Specification (IFS). The four elements of the CRWMS are the Waste Acceptance System, the Transportation System, the Monitored Retrievable Storage (MRS) System and the Mined Geologic Disposal System (MGDS). The Interface Specification describes the six inter-element interfaces between the four elements. This hierarchy establishes the requirements to be addressed by the design of the system elements. Many of the technical requirements for the CRWMS are documented in a variety of Federal regulations, DOE directives and other Government documentation. It is the purpose of the CRD to establish the technical requirements for the entire program. In doing so, the CRD summarizes source documentation for requirements that must be addressed by the program, specifies particular requirements, and documents derived requirements that are not covered in regulatory and other Government documentation, but are necessary to accomplish the mission of the CRWMS. The CRD defines the CRWMS by identifying the top-level functions the elements must perform (These top-level functions were derived using functional analysis initially documented in the Physical System Requirements (PSR) documents). The CRD also defines the top-level physical architecture of the system and allocates the functions and requirements to the architectural elements of the system

  10. Document image database indexing with pictorial dictionary

    Science.gov (United States)

    Akbari, Mohammad; Azimi, Reza

    2010-02-01

    In this paper we introduce a new approach for information retrieval from Persian document image database without using Optical Character Recognition (OCR).At first an attribute called subword upper contour label is defined then, a pictorial dictionary is constructed based on this attribute for the subwords. By this approach we address two issues in document image retrieval: keyword spotting and retrieval according to the document similarities. The proposed methods have been evaluated on a Persian document image database. The results have proved the ability of this approach in document image information retrieval.

  11. The development of AECB regulatory documents

    International Nuclear Information System (INIS)

    Joyce, M.

    1981-01-01

    This document describes the Atomic Energy Control Board's (AECB) approach to the development and preparation of regulatory documents. The principal factors that have shaped the AECB'a regulatory approach are identified as background to the evolution of regulatory documents as are a number of current influences that affect the present and future development of these documents. Also described are the process by which regulatory documents are prepared and published and the points of contact between this process and the Canadian Standards Association program for nuclear standards. (author)

  12. Growing electronic documents created by researchers

    Directory of Open Access Journals (Sweden)

    Monika Weiss

    2017-05-01

    Full Text Available In the contemporary world technology is an indispensable element, both in personal and professional sphere. Despite the fact, that we do not attach significance to it in our everyday lives, the technological development engulfed us and still reminds us about that. In the face of dynamically growing digitization there occurred a new form of document – an electronic document. The study concerns the growing electronic documentation among researchers working at the Nicolaus Copernicus University in Toruń. The analysis of surveys and interviews resulted in thesis, that researchers use e-document more frequently than analog documentation. Flexibility and accessibility of this type of documents become a problem in personal papers which will be archived in the future – maybe in most part in the form of electronic documentation.

  13. 75 FR 51392 - New York: Incorporation by Reference of State Hazardous Waste Management Program

    Science.gov (United States)

    2010-08-20

    ... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 272 [EPA-R02-RCRA-2010-0249; FRL-9178-8] New York: Incorporation by Reference of State Hazardous Waste Management Program Correction In rule document 2010-18927 beginning on page 45489 in the issue of Tuesday, August 3, 2010, make the following correction: Appendix A...

  14. Incorporation of an invasive plant into a native insect herbivore food web

    NARCIS (Netherlands)

    Schilthuizen, Menno; Santos Pimenta, Lúcia P; Lammers, Youri; Steenbergen, Peter J; Flohil, Marco; Beveridge, Nils G P; van Duijn, Pieter T; Meulblok, Marjolein M; Sosef, Nils; van de Ven, Robin; Werring, Ralf; Beentjes, Kevin K; Meijer, Kim; Vos, Rutger A; Vrieling, Klaas; Gravendeel, Barbara; Choi, Young; Verpoorte, Robert; Smit, Chris; Beukeboom, Leo W

    2016-01-01

    The integration of invasive species into native food webs represent multifarious dynamics of ecological and evolutionary processes. We document incorporation of Prunus serotina (black cherry) into native insect food webs. We find that P. serotina harbours a herbivore community less dense but more

  15. Document retrieval on repetitive string collections.

    Science.gov (United States)

    Gagie, Travis; Hartikainen, Aleksi; Karhu, Kalle; Kärkkäinen, Juha; Navarro, Gonzalo; Puglisi, Simon J; Sirén, Jouni

    2017-01-01

    Most of the fastest-growing string collections today are repetitive, that is, most of the constituent documents are similar to many others. As these collections keep growing, a key approach to handling them is to exploit their repetitiveness, which can reduce their space usage by orders of magnitude. We study the problem of indexing repetitive string collections in order to perform efficient document retrieval operations on them. Document retrieval problems are routinely solved by search engines on large natural language collections, but the techniques are less developed on generic string collections. The case of repetitive string collections is even less understood, and there are very few existing solutions. We develop two novel ideas, interleaved LCPs and precomputed document lists , that yield highly compressed indexes solving the problem of document listing (find all the documents where a string appears), top- k document retrieval (find the k documents where a string appears most often), and document counting (count the number of documents where a string appears). We also show that a classical data structure supporting the latter query becomes highly compressible on repetitive data. Finally, we show how the tools we developed can be combined to solve ranked conjunctive and disjunctive multi-term queries under the simple [Formula: see text] model of relevance. We thoroughly evaluate the resulting techniques in various real-life repetitiveness scenarios, and recommend the best choices for each case.

  16. Assessment model validity document FARF31

    International Nuclear Information System (INIS)

    Elert, Mark; Gylling Bjoern; Lindgren, Maria

    2004-08-01

    -fractures with flowing water and rock with porosity accessible only by diffusion. The approach furthermore assumes that the properties within the two porosity domains are averaged and also the transfer between the two domains is averaged.It is an important validation issue to verify that effective averaging of parameters can be performed and that suitable values can be derived. It can be shown that matrix interaction properties along a flow path can be integrated to an effective value and if the matrix depth can be considered as infinite, effective values may be derived also for the diffusion and sorption parameters. Thus, it is possible to derive effective parameters for sorbing radionuclides incorporating the total matrix effects along a flow path. This is strictly valid only for cases with no dispersion, but gives a good approximation as long as dispersion does not dominate the transport. FARF31 has been tested and compared with analytical solutions and other models and was found to correspond well within a wide range of input parameters. Support and documentation on how to use FARF31 are two important components to avoid calculation mistakes and obtain trustworthy results. The documentation describes handling and updates of the code. Test cases have been constructed which can be used to check updates and be used as templates. The development of the code is kept under source code control to fulfil quality assurance. The model is deemed to be well suited for performance assessments within the SKB framework

  17. 76 FR 66311 - Draft Documents To Support Submission of an Electronic Common Technical Document; Availability

    Science.gov (United States)

    2011-10-26

    ...] Draft Documents To Support Submission of an Electronic Common Technical Document; Availability AGENCY... making regulatory submissions in electronic format using the electronic Common Technical Document (eCTD....S. regional document type definition, version 3.0) and ``Comprehensive Table of Contents Headings...

  18. New Challenges of the Documentation in Media

    Directory of Open Access Journals (Sweden)

    Antonio García Jiménez

    2015-07-01

    Full Text Available This special issue, presented by index.comunicación, is focused on media related information & documentation. This field undergoes constant and profound changes, especially visible in documentation processes. A situation characterized by the existence of tablets, smartphones, applications, and by the almost achieved digitization of traditional documents, in addition to the crisis of the press business model, that involves mutations in the journalists’ tasks and in the relationship between them and Documentation. Papers included in this special issue focus on some of the concerns in this domain: the progressive autonomy of the journalist in access to information sources, the role of press offices as documentation sources, the search of information on the web, the situation of media blogs, the viability of elements of information architecture in smart TV and the development of social TV and its connection to Documentation.

  19. Structure and drafting of safeguards regulatory documents

    International Nuclear Information System (INIS)

    Cole, R.J.; Bennett, C.A.; Edelhertz, H.; Wood, M.T.; Brown, R.J.; Roberts, F.P.

    1977-09-01

    This study develops hypothesis about the relation between the structure and drafting of safeguards regulatory documents and the ability of document users to understand and implement them in a way that reflects the intent and requirements of the NRC. Four decisions are needed to improve communication: (1) Should improvement of safeguards regulatory documents as communication instruments be an explicit NRC program. (2) What specific methods of communication should be the focus of improvement efforts. (3) What actions to improve communications are feasible and desirable. (4) How should the NRC divide its available effort and resources among desirable actions in order to provide the most effective communication through regulatory documents. This volume contains: introduction, conceptual bases, legal requirements, targets, choice of documents, preparation of documents, readability, and further study of recommended changes in structure and drafting

  20. Specifications for human factors guiding documents

    Energy Technology Data Exchange (ETDEWEB)

    Rhodes, W; Szlapetis, I; MacGregor, C [Rhodes and Associates Inc., Toronto, ON (Canada)

    1995-04-01

    This report specifies the content, function and appearance of three proposed human factors guiding documents to be used by the Atomic Energy Control board and its licensees. These three guiding documents, to be developed at a later date, are: (a) Human Factors Process Guide; (b) Human Factors Activities Guide; and (c) Human Factors Design Integration Guide. The specifications were developed by examining the best documents as identified in a previous contract with the AECB (Review of Human Factors Guidelines and Methods by W. Rhodes, I. Szlapetis et al. 1992), and a brief literature review. The best features and content were selected from existing documents and used to develop specifications for the guiding documents. The developer of the actual guides would use these specifications to produce comprehensive and consolidated documents at a later date. (author). 128 ref., 7 figs.

  1. Specifications for human factors guiding documents

    International Nuclear Information System (INIS)

    Rhodes, W.; Szlapetis, I.; MacGregor, C.

    1995-04-01

    This report specifies the content, function and appearance of three proposed human factors guiding documents to be used by the Atomic Energy Control board and its licensees. These three guiding documents, to be developed at a later date, are: (a) Human Factors Process Guide; (b) Human Factors Activities Guide; and (c) Human Factors Design Integration Guide. The specifications were developed by examining the best documents as identified in a previous contract with the AECB (Review of Human Factors Guidelines and Methods by W. Rhodes, I. Szlapetis et al. 1992), and a brief literature review. The best features and content were selected from existing documents and used to develop specifications for the guiding documents. The developer of the actual guides would use these specifications to produce comprehensive and consolidated documents at a later date. (author). 128 ref., 7 figs

  2. AVLIS documentation overview and tables of contents

    International Nuclear Information System (INIS)

    1984-01-01

    Three documents constitute the executive summary series in Data Package III: this document (Documentation Overview and Tables of Contents (E001)) plus the AVLIS Production Plant Executive Summary (E010) and the AVLIS Production Plant Overall Design Report (E020). They provide progressively greater detail on the key information and conclusions contained within the data package. The Executive Summary and Overall Design Report present summaries of each Data Package III document. They are intended to provide a global overview of AVLIS Production Plant deployment including program planning, project management, schedules, engineering design, production, operations, capital cost, and operating cost. The purpose of Overview and Tables of Contents is threefold: to briefly review AVLIS goals for Data Package III documentation, to present an overview of the contents of the data package, and to provide a useful guide to information contained in the numerous documents comprising the package

  3. Fiscal year 1997-1998 waste information requirements document

    International Nuclear Information System (INIS)

    Poppiti, J.A.

    1997-01-01

    The Waste Information Requirements Document describes the activities of the Tank Waste Remediation System (TWRS) Characterization Project that provide characterization information on Hanford Site waste tanks. The characterization information is required to perform operations and meet the commitments of TWRS end users. These commitments are derived from the Hanford Federal Facility Agreement and Consent Order, also known as the Tri-Party Agreement; the Recommendation 93-5 Implementation Plan to the Defense Nuclear Facilities Safety Board (DNFSB); and other directives as listed in Section 4.0. This Waste Information Requirement Document applies to Fiscal Years 1997 and 1998 activities. Its contents are based on the best information available in August 1997. The format and content are based on the directions of DOE-RL (Sieracki, 1997) and Fluor Daniel Hanford Incorporated (Umek, 1997). Activities, such as the revision of the Tank Characterization Technical Sampling Basis (Brown et al. 1997), the revision of the data quality objectives (DQOs), issue closures, discussions with Ecology, and management decisions may cause subsequent updates to the Waste Information Requirements Document

  4. AVIS: analysis method for document coherence

    International Nuclear Information System (INIS)

    Henry, J.Y.; Elsensohn, O.

    1994-06-01

    The present document intends to give a short insight into AVIS, a method which permits to verify the quality of technical documents. The paper includes the presentation of the applied approach based on the K.O.D. method, the definition of quality criteria of a technical document, as well as a description of the means of valuating these criteria. (authors). 9 refs., 2 figs

  5. Defense Transuranic Waste Program Strategy Document

    International Nuclear Information System (INIS)

    1984-01-01

    The Defense Transuranic Waste Program (DTWP) Strategy Document presents the general strategy for managing transuranic (TRU) waste materials generated during defense and research activities regulated by the US Department of Energy. The Strategy Document includes discussion of objectives and activities relating to the entire Defense Transuranic Waste Program. However, the primary focus is on the specific management responsibilities of the Transuranic Waste Lead Organization (TLO). The document also includes an updated summary of progress on TLO-managed activities over the past year

  6. Synthesis document on the long life behavior of packages: reference operational document ''CSD-C'' 2004

    International Nuclear Information System (INIS)

    Helie, M.

    2004-12-01

    This document is realized in the framework of the law of 1991 on the radioactive wastes management. The 2004 synthesis document on long time behavior of standard packages of compacted wastes is constituted by two documents, the reference document and the operational document. This paper presents the operational model describing the packages alteration by the water and the associated radionuclide release. (A.L.B.)

  7. Synthesis document on the long time behavior of packages: operational document ''bituminous'' 2204

    International Nuclear Information System (INIS)

    Tiffreau, C.

    2004-09-01

    This document is realized in the framework of the law of 1991 on the radioactive wastes management. The 2004 synthesis document on long time behavior of bituminous sludges packages is constituted by two documents, the reference document and the operational document. This paper presents the operational model describing the water alteration of the packages and the associated radioelements release, as the gas term source and the swelling associated to the self-irradiation and the bituminous radiolysis. (A.L.B.)

  8. Forensic document analysis using scanning microscopy

    Science.gov (United States)

    Shaffer, Douglas K.

    2009-05-01

    The authentication and identification of the source of a printed document(s) can be important in forensic investigations involving a wide range of fraudulent materials, including counterfeit currency, travel and identity documents, business and personal checks, money orders, prescription labels, travelers checks, medical records, financial documents and threatening correspondence. The physical and chemical characterization of document materials - including paper, writing inks and printed media - is becoming increasingly relevant for law enforcement agencies, with the availability of a wide variety of sophisticated commercial printers and copiers which are capable of producing fraudulent documents of extremely high print quality, rendering these difficult to distinguish from genuine documents. This paper describes various applications and analytical methodologies using scanning electron miscoscopy/energy dispersive (x-ray) spectroscopy (SEM/EDS) and related technologies for the characterization of fraudulent documents, and illustrates how their morphological and chemical profiles can be compared to (1) authenticate and (2) link forensic documents with a common source(s) in their production history.

  9. Gestión documental, febrero 2010

    OpenAIRE

    Bustelo Ruesta, Carlota; García Morales, Elisa

    2010-01-01

    La gestió documental té com a finalitat assegurar una atenció adequada als documents creats, rebuts o gestionats per una organització com a prova de les activitats realitzades, preservant-los durant el temps què sigui necessari. Aquesta assignatura pretén proporcionar els coneixements teòrics i pràctics necessaris per a analitzar, dissenyar i implementar un sistema de gestió documental. Per aquesta raó, es centra en la gestió dels documents que una organització manté com a resultat dels seus ...

  10. Recommended documentation for computer users at ANL

    Energy Technology Data Exchange (ETDEWEB)

    Heiberger, A.A.

    1992-04-01

    Recommended Documentation for Computer Users at ANL is for all users of the services available from the Argonne National Laboratory (ANL) Computing and Telecommunications Division (CTD). This document will guide you in selecting available documentation that will best fill your particular needs. Chapter 1 explains how to use this document to select documents and how to obtain them from the CTD Document Distribution Counter. Chapter 2 contains a table that categorizes available publications. Chapter 3 gives descriptions of the online DOCUMENT command for CMS, and VAX, and the Sun workstation. DOCUMENT allows you to scan for and order documentation that interests you. Chapter 4 lists publications by subject. Categories I and IX cover publications of a general nature and publications on telecommunications and networks respectively. Categories II, III, IV, V, VI, VII, VIII, and X cover publications on specific computer systems. Category XI covers publications on advanced scientific computing at Argonne. Chapter 5 contains abstracts for each publication, all arranged alphabetically. Chapter 6 describes additional publications containing bibliographies and master indexes that the user may find useful. The appendix identifies available computer systems, applications, languages, and libraries.

  11. Document reconstruction by layout analysis of snippets

    Science.gov (United States)

    Kleber, Florian; Diem, Markus; Sablatnig, Robert

    2010-02-01

    Document analysis is done to analyze entire forms (e.g. intelligent form analysis, table detection) or to describe the layout/structure of a document. Also skew detection of scanned documents is performed to support OCR algorithms that are sensitive to skew. In this paper document analysis is applied to snippets of torn documents to calculate features for the reconstruction. Documents can either be destroyed by the intention to make the printed content unavailable (e.g. tax fraud investigation, business crime) or due to time induced degeneration of ancient documents (e.g. bad storage conditions). Current reconstruction methods for manually torn documents deal with the shape, inpainting and texture synthesis techniques. In this paper the possibility of document analysis techniques of snippets to support the matching algorithm by considering additional features are shown. This implies a rotational analysis, a color analysis and a line detection. As a future work it is planned to extend the feature set with the paper type (blank, checked, lined), the type of the writing (handwritten vs. machine printed) and the text layout of a snippet (text size, line spacing). Preliminary results show that these pre-processing steps can be performed reliably on a real dataset consisting of 690 snippets.

  12. Entity models for trigger-reaction documents

    NARCIS (Netherlands)

    Khalid, M.A.; Marx, M.; Makkes, M.X.

    2008-01-01

    We define the notion of an entity model for a special kind of document popular on the web: an article followed by a list of reactions on that article, usually by many authors, usually inverse chronologically ordered. We call these documents trigger-reactions pairs. The entity model describes which

  13. 48 CFR 1415.406 - Documentation.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Documentation. 1415.406 Section 1415.406 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 1415.406 Documentation. ...

  14. Hanford surplus facilities hazards identification document

    International Nuclear Information System (INIS)

    Egge, R.G.

    1997-01-01

    This document provides general safety information needed by personnel who enter and work in surplus facilities managed by Bechtel Hanford, Inc. The purpose of the document is to enhance access control of surplus facilities, educate personnel on the potential hazards associated with these facilities prior to entry, and ensure that safety precautions are taken while in the facility

  15. IR and OLAP in XML document warehouses

    DEFF Research Database (Denmark)

    Perez, Juan Manuel; Pedersen, Torben Bach; Berlanga, Rafael

    2005-01-01

    In this paper we propose to combine IR and OLAP (On-Line Analytical Processing) technologies to exploit a warehouse of text-rich XML documents. In the system we plan to develop, a multidimensional implementation of a relevance modeling document model will be used for interactively querying...

  16. Varsity letters documenting modern colleges and universities

    CERN Document Server

    Samuels, Helen Willa

    1998-01-01

    A study of the functions of colleges and universities, Varsity Letters is intended to aid those responsible for the documentation of these institutions. Samuels offers specific advice about the records of modern colleges and universities and proposes a method to ensure their adequate documentation. She also offers a method to analyze and plan the preservation of records for any type of institution.

  17. INFCE technical co-ordinating committee documents

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    A collection of the documents covering the period December 1977 through February 1980 submitted to or generated by the Technical Co-ordinating Comittee is presented. The documents cover primarily the organizational aspects of INFCE, but conclusions from the various Working Groups are summarized.

  18. Enhancing multi-document summarization using concepts

    Indian Academy of Sciences (India)

    Pattabhi R K Rao

    2018-03-10

    Mar 10, 2018 ... In this paper we propose a methodology to mine concepts from documents and use these concepts to generate an .... multi-document summarization system that uses sentence clustering. .... Examples: 'smart phone', 'running water'. Figure 1. .... cesses input, and begins by making stochastic decisions.

  19. PFP MICON DCS computer software documentation

    Energy Technology Data Exchange (ETDEWEB)

    Silvan, G.R.

    1996-03-26

    This document contains the complete printout of the MICON A/S system configuration used in the Plutonium Finishing Plant. The document is divided into several volumes. Volume 1 covers the workstation display and configuration. All other volumes contain the controller configurations, or programs.

  20. INFCE technical co-ordinating committee documents

    International Nuclear Information System (INIS)

    A collection of the documents covering the period December 1977 through February 1980 submitted to or generated by the Technical Co-ordinating Comittee is presented. The documents cover primarily the organizational aspects of INFCE, but conclusions from the various Working Trays are summarized

  1. Technical basis document for internal dosimetry

    International Nuclear Information System (INIS)

    Hickman, D.P.

    1991-01-01

    This document provides the technical basis for the Chem-Nuclear Geotech (Geotech) internal dosimetry program. Geotech policy describes the intentions of the company in complying with radiation protection standards and the as low as reasonably achievable (ALARA) program. It uses this policy and applicable protection standards to derive acceptable methods and levels of bioassay to assure compliance. The models and computational methods used are described in detail within this document. FR-om these models, dose- conversion factors and derived limits are computed. These computations are then verified using existing documentation and verification information or by demonstration of the calculations used to obtain the dose-conversion factors and derived limits. Recommendations for methods of optimizing the internal dosimetry program to provide effective monitoring and dose assessment for workers are provided in the last section of this document. This document is intended to be used in establishing an accredited dosimetry program in accordance with expected Department of Energy Laboratory Accreditation Program (DOELAP) requirements for the selected radionuclides provided in this document, including uranium mill tailing mixtures. Additions and modifications to this document and procedures derived FR-om this document are expected in the future according to changes in standards and changes in programmatic mission

  2. PFP MICON DCS computer software documentation

    International Nuclear Information System (INIS)

    Silvan, G.R.

    1996-01-01

    This document contains the complete printout of the MICON A/S system configuration used in the Plutonium Finishing Plant. The document is divided into several volumes. Volume 1 covers the workstation display and configuration. All other volumes contain the controller configurations, or programs

  3. Honeywell Modular Automation System Computer Software Documentation

    International Nuclear Information System (INIS)

    CUNNINGHAM, L.T.

    1999-01-01

    This document provides a Computer Software Documentation for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This system will be used to control new thermal stabilization furnaces in HA-211 and vertical denitration calciner in HC-230C-2

  4. Modeling documents with Generative Adversarial Networks

    OpenAIRE

    Glover, John

    2016-01-01

    This paper describes a method for using Generative Adversarial Networks to learn distributed representations of natural language documents. We propose a model that is based on the recently proposed Energy-Based GAN, but instead uses a Denoising Autoencoder as the discriminator network. Document representations are extracted from the hidden layer of the discriminator and evaluated both quantitatively and qualitatively.

  5. Semiotics, Information Science, Documents and Computers.

    Science.gov (United States)

    Warner, Julian

    1990-01-01

    Discusses the relationship and value of semiotics to the established domains of information science. Highlights include documentation; computer operations; the language of computing; automata theory; linguistics; speech and writing; and the written language as a unifying principle for the document and the computer. (93 references) (LRW)

  6. Servir: an automated document delivery system

    International Nuclear Information System (INIS)

    Lima, E.C.; Azevedo Coutinho, O.C. de

    1986-01-01

    SERVIR, an automated document delivery system developed by CIN/CNEN, is described. Parametric procedures for reading bibliographic data bases and requesting documents from libraries through computer are specified. Statistical procedures, accounting system and the on-line fulfillment of requests are presented. (Author) [pt

  7. Supplemental Information Source Document Waste Management

    Energy Technology Data Exchange (ETDEWEB)

    Wood, Craig [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Halpern, Jonathan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wrons, Ralph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Reiser, Anita [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mond, Michael du [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Shain, Matthew [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-12-01

    This Supplemental Information Source Document for Waste Management was prepared in support of future analyses including those that may be performed as part of the Sandia National Laboratories, New Mexico (SNL/NM) Site-Wide Environmental Impact Statement. This document presents information about waste management practices at SNL/NM, including definitions, inventory data, and an overview of current activities.

  8. Documentation Panels Enhance Teacher Education Programs

    Science.gov (United States)

    Warash, Bobbie Gibson

    2005-01-01

    Documentation of children's projects is advantageous to their learning process and is also a good method for student teachers to observe the process of learning. Documentation panels are a unique way to help student teachers understand how children learn. Completing a panel requires a student teacher to think through a process. Teachers must learn…

  9. 7 CFR 1710.407 - Loan documents.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Loan documents. 1710.407 Section 1710.407 Agriculture... GENERAL AND PRE-LOAN POLICIES AND PROCEDURES COMMON TO ELECTRIC LOANS AND GUARANTEES Application Requirements and Procedures for Loans § 1710.407 Loan documents. Following approval of a loan, RUS will forward...

  10. 7 CFR 1737.92 - Loan documents.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Loan documents. 1737.92 Section 1737.92 Agriculture... PRE-LOAN POLICIES AND PROCEDURES COMMON TO INSURED AND GUARANTEED TELECOMMUNICATIONS LOANS Final Loan Approval Procedures § 1737.92 Loan documents. Following approval of the loan, RUS shall forward the...

  11. Documentation and Development. Experience in Algeria

    Science.gov (United States)

    Tchuigoua, J. Founou

    1972-01-01

    A description of the activities of the Documentation, Library and Archives Department of the Algiers Chamber of Commerce and Industry, which is run by a small staff on a modest budget, provides documentation services for the staff of the Chamber of Commerce and also assists other centers in Algeria. (Author)

  12. Instruction in Documentation for Computer Programming

    Science.gov (United States)

    Westley, John W.

    1976-01-01

    In addition to the input/output record format, the program flowchart, the program listing, and the program test output, eight documentation items are suggested in order that they may serve as a base from which to start teaching program documentation. (Author/AG)

  13. Formulation of Bioadhesive Carbomer Gel Incorporating Drug ...

    African Journals Online (AJOL)

    incorporated into carbomer gel and evaluated for drug release. Results: ... localized delivery system for the treatment inflammation and infection in periodontal pockets. ..... loaded with diclofenac sodium for intra- articular administration. J Drug ...

  14. Personalized Metaheuristic Clustering Onto Web Documents

    Institute of Scientific and Technical Information of China (English)

    Wookey Lee

    2004-01-01

    Optimal clustering for the web documents is known to complicated cornbinatorial Optimization problem and it is hard to develop a generally applicable oplimal algorithm. An accelerated simuIated arlneaIing aIgorithm is developed for automatic web document classification. The web document classification problem is addressed as the problem of best describing a match between a web query and a hypothesized web object. The normalized term frequency and inverse document frequency coefficient is used as a measure of the match. Test beds are generated on - line during the search by transforming model web sites. As a result, web sites can be clustered optimally in terms of keyword vectofs of corresponding web documents.

  15. Document recognition serving people with disabilities

    Science.gov (United States)

    Fruchterman, James R.

    2007-01-01

    Document recognition advances have improved the lives of people with print disabilities, by providing accessible documents. This invited paper provides perspectives on the author's career progression from document recognition professional to social entrepreneur applying this technology to help people with disabilities. Starting with initial thoughts about optical character recognition in college, it continues with the creation of accurate omnifont character recognition that did not require training. It was difficult to make a reading machine for the blind in a commercial setting, which led to the creation of a nonprofit social enterprise to deliver these devices around the world. This network of people with disabilities scanning books drove the creation of Bookshare.org, an online library of scanned books. Looking forward, the needs for improved document recognition technology to further lower the barriers to reading are discussed. Document recognition professionals should be proud of the positive impact their work has had on some of society's most disadvantaged communities.

  16. Mined Geologic Disposal System Requirements Document

    International Nuclear Information System (INIS)

    1993-01-01

    This Mined Geologic Disposal System Requirements document (MGDS-RD) describes the functions to be performed by, and the requirements for, a Mined Geologic Disposal System (MGDS) for the permanent disposal of spent nuclear fuel (SNF) and commercial and defense high level radioactive waste (HLW) in support of the Civilian Radioactive Waste Management System (CRWMS). The development and control of the MGDS-RD is quality-affecting work and is subject to the Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM) Quality Assurance Requirements Document (QARD). As part of the technical requirements baseline, it is also subject to Baseline Management Plan controls. The MGDS-RD and the other program-level requirements documents have been prepared and managed in accordance with the Technical Document Preparation Plan (TDPP) for the Preparation of System Requirements Documents

  17. Technical basis document for internal dosimetry

    CERN Document Server

    Hickman, D P

    1991-01-01

    This document provides the technical basis for the Chem-Nuclear Geotech (Geotech) internal dosimetry program. Geotech policy describes the intentions of the company in complying with radiation protection standards and the as low as reasonably achievable (ALARA) program. It uses this policy and applicable protection standards to derive acceptable methods and levels of bioassay to assure compliance. The models and computational methods used are described in detail within this document. FR-om these models, dose- conversion factors and derived limits are computed. These computations are then verified using existing documentation and verification information or by demonstration of the calculations used to obtain the dose-conversion factors and derived limits. Recommendations for methods of optimizing the internal dosimetry program to provide effective monitoring and dose assessment for workers are provided in the last section of this document. This document is intended to be used in establishing an accredited dosi...

  18. Old TNX Seepage Basin: Environmental information document

    International Nuclear Information System (INIS)

    Dunaway, J.K.; Johnson, W.F.; Kingley, L.E.; Simmons, R.V.; Bledsoe, H.W.; Smith, J.A.

    1986-12-01

    This document provides environmental information on postulated closure options for the Old TNX Seepage Basin at the Savannah River Plant and was developed as background technical documentation for the Department of Energy's proposed Environmental Impact Statement (EIS) on waste management activities for groundwater protection at the plant. The results of groundwater and atmospheric pathway analyses, accident analysis, and other environmental assessments discussed in this document are based upon a conservative analysis of all foreseeable scenarios as defined by the National Environmental Policy Act (40 CFR 1500-1508). The scenarios do not necessarily represent actual environmental conditions. This document is not meant to be used as a regulatory closure plan or other regulatory document to comply with required federal or state environmental regulations

  19. Semantic Metadata for Heterogeneous Spatial Planning Documents

    Science.gov (United States)

    Iwaniak, A.; Kaczmarek, I.; Łukowicz, J.; Strzelecki, M.; Coetzee, S.; Paluszyński, W.

    2016-09-01

    Spatial planning documents contain information about the principles and rights of land use in different zones of a local authority. They are the basis for administrative decision making in support of sustainable development. In Poland these documents are published on the Web according to a prescribed non-extendable XML schema, designed for optimum presentation to humans in HTML web pages. There is no document standard, and limited functionality exists for adding references to external resources. The text in these documents is discoverable and searchable by general-purpose web search engines, but the semantics of the content cannot be discovered or queried. The spatial information in these documents is geographically referenced but not machine-readable. Major manual efforts are required to integrate such heterogeneous spatial planning documents from various local authorities for analysis, scenario planning and decision support. This article presents results of an implementation using machine-readable semantic metadata to identify relationships among regulations in the text, spatial objects in the drawings and links to external resources. A spatial planning ontology was used to annotate different sections of spatial planning documents with semantic metadata in the Resource Description Framework in Attributes (RDFa). The semantic interpretation of the content, links between document elements and links to external resources were embedded in XHTML pages. An example and use case from the spatial planning domain in Poland is presented to evaluate its efficiency and applicability. The solution enables the automated integration of spatial planning documents from multiple local authorities to assist decision makers with understanding and interpreting spatial planning information. The approach is equally applicable to legal documents from other countries and domains, such as cultural heritage and environmental management.

  20. SEMANTIC METADATA FOR HETEROGENEOUS SPATIAL PLANNING DOCUMENTS

    Directory of Open Access Journals (Sweden)

    A. Iwaniak

    2016-09-01

    Full Text Available Spatial planning documents contain information about the principles and rights of land use in different zones of a local authority. They are the basis for administrative decision making in support of sustainable development. In Poland these documents are published on the Web according to a prescribed non-extendable XML schema, designed for optimum presentation to humans in HTML web pages. There is no document standard, and limited functionality exists for adding references to external resources. The text in these documents is discoverable and searchable by general-purpose web search engines, but the semantics of the content cannot be discovered or queried. The spatial information in these documents is geographically referenced but not machine-readable. Major manual efforts are required to integrate such heterogeneous spatial planning documents from various local authorities for analysis, scenario planning and decision support. This article presents results of an implementation using machine-readable semantic metadata to identify relationships among regulations in the text, spatial objects in the drawings and links to external resources. A spatial planning ontology was used to annotate different sections of spatial planning documents with semantic metadata in the Resource Description Framework in Attributes (RDFa. The semantic interpretation of the content, links between document elements and links to external resources were embedded in XHTML pages. An example and use case from the spatial planning domain in Poland is presented to evaluate its efficiency and applicability. The solution enables the automated integration of spatial planning documents from multiple local authorities to assist decision makers with understanding and interpreting spatial planning information. The approach is equally applicable to legal documents from other countries and domains, such as cultural heritage and environmental management.

  1. Incorporating permaculture and strategic management for sustainable ecological resource management.

    Science.gov (United States)

    Akhtar, Faiza; Lodhi, Suleman A; Khan, Safdar Shah; Sarwar, Farhana

    2016-09-01

    Utilization of natural assets to the best efficient level without changing natural balance has become a critical issue for researchers as awareness on climate change takes central position in global debate. Conventional sustainable resource management systems are based on neoclassical economic approach that ignores the nature's pattern and therefore are not actually capable of sustainable management of resources. Environmentalists are lately advocating incorporation of Permaculture as holistic approach based on ethics, equitable interaction with eco-systems to obtain sustainability. The paper integrates philosophy of permaculture with strategic management frameworks to develop a pragmatic tool for policy development. The policy design tool augments management tasks by integrating recording of natural assets, monitoring of key performance indicators and integration of sectorial policies in real time, bringing out policy as a truly live document. The tool enhances the edifice process, balancing short term viewpoints and long term development to secure renewability of natural resources. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. The impact of documentation on communication during patient-physiotherapist interactions: A qualitative observational study.

    Science.gov (United States)

    Schoeb, Veronika; Hiller, Amy

    2018-01-31

    Documentation is an essential component of physiotherapy practice for clinical, legal, and ethical reasons. Research in other healthcare contexts suggests that documentation impacts upon communication in patient-practitioner interactions. Thus, the objective of this qualitative study was to examine how physiotherapists and their patients communicate during episodes of documentation. The research was informed by ethnomethodology and ethnography. In total, 113 patient-physiotherapist interactions were observed in Switzerland and Australia with video-recordings, audio-recordings, and field notes collected as data. Episodes of documentation within these interactions were transcribed, and both verbal and non-verbal communication were analyzed inductively. Analysis identified that communication during documentation was characterized by: pauses in conversation, pre-established order of questioning, minimal eye contact, use of direct communication, and an emphasis on objectivity. The use of documentation was observed to alter the wording of questioning as well as the sequence and flow of conversation between patient and physiotherapist. In addition, the observed communicative features seemed to restrict patient participation, and may hinder the achievement of a patient-centered approach. Recognizing the importance of documentation, we address the challenges that our research highlighted by proposing strategies to assist educators and clinicians to optimize communication with patients when incorporating documentation into practice.

  3. Criteria Document for B-plant's Surveillance and Maintenance Phase Safety Basis Document

    International Nuclear Information System (INIS)

    SCHWEHR, B.A.

    1999-01-01

    This document is required by the Project Hanford Managing Contractor (PHMC) procedure, HNF-PRO-705, Safety Basis Planning, Documentation, Review, and Approval. This document specifies the criteria that shall be in the B Plant surveillance and maintenance phase safety basis in order to obtain approval of the DOE-RL. This CD describes the criteria to be addressed in the S and M Phase safety basis for the deactivated Waste Fractionization Facility (B Plant) on the Hanford Site in Washington state. This criteria document describes: the document type and format that will be used for the S and M Phase safety basis, the requirements documents that will be invoked for the document development, the deactivated condition of the B Plant facility, and the scope of issues to be addressed in the S and M Phase safety basis document

  4. Digital watermarks in electronic document circulation

    Directory of Open Access Journals (Sweden)

    Vitaliy Grigorievich Ivanenko

    2017-07-01

    Full Text Available This paper reviews different protection methods for electronic documents, their good and bad qualities. Common attacks on electronic documents are analyzed. Digital signature and ways of eliminating its flaws are studied. Different digital watermark embedding methods are described, they are divided into 2 types. The solution to protection of electronic documents is based on embedding digital watermarks. Comparative analysis of this methods is given. As a result, the most convenient method is suggested – reversible data hiding. It’s remarked that this technique excels at securing the integrity of the container and its digital watermark. Digital watermark embedding system should prevent illegal access to the digital watermark and its container. Digital watermark requirements for electronic document protection are produced. Legal aspect of copyright protection is reviewed. Advantages of embedding digital watermarks in electronic documents are produced. Modern reversible data hiding techniques are studied. Distinctive features of digital watermark use in Russia are highlighted. Digital watermark serves as an additional layer of defense, that is in most cases unknown to the violator. With an embedded digital watermark, it’s impossible to misappropriate the authorship of the document, even if the intruder signs his name on it. Therefore, digital watermarks can act as an effective additional tool to protect electronic documents.

  5. Documenting pharmacist interventions on an intranet.

    Science.gov (United States)

    Simonian, Armen I

    2003-01-15

    The process of developing and implementing an intranet Web site for clinical intervention documentation is described. An inpatient pharmacy department initiated an organizationwide effort to improve documentation of interventions by pharmacists at its seven hospitals to achieve real-time capture of meaningful benchmarking data. Standardization of intervention types would allow the health system to contrast and compare medication use, process improvement, and patient care initiatives among its hospitals. After completing a needs assessment and reviewing current methodologies, a computerized tracking tool was developed in-house and integrated with the organization's intranet. Representatives from all hospitals agreed on content and functionality requirements for the Web site. The site was completed and activated in February 2002. Before this Web site was established, the most documented intervention types were Renal Adjustment and Clarify Dose, with a daily average of four and three, respectively. After site activation, daily averages for Renal Adjustment remained unchanged, but Clarify Dose is now documented nine times per day. Drug Information and i.v.-to-p.o. intervention types, which previously averaged less than one intervention per day, are now documented an average of four times daily. Approximately 91% of staff pharmacists are using this site. Future plans for this site include enhanced accessibility to the site with wireless personal digital assistants. The design and implementation of an intranet Web site to document pharmacists' interventions doubled the rate of intervention documentation and standardized the intervention types among hospitals in the health system.

  6. Radiocarbon dating of ancient Japanese documents

    International Nuclear Information System (INIS)

    Oda, H.

    2001-01-01

    History is a reconstruction of past human activity, evidence of which is remained in the form of documents or relics. For the reconstruction of historic period, the radiocarbon dating of ancient documents provides important information. Although radiocarbon age is converted into calendar age with the calibration curve, the calibrated radiocarbon age is still different from the historical age when the document was written. The difference is known as 'old wood effect' for wooden cultural property. The discrepancy becomes more serious problem for recent sample which requires more accurate age determination. Using Tandetron accelerator mass spectrometer at Nagoya University, we have measured radiocarbon ages of Japanese ancient documents, sutras and printed books written dates of which are clarified from the paleographic standpoint. The purpose is to clarify the relation between calibrated radiocarbon age and historical age of ancient Japanese document by AMS radiocarbon dating. This paper reports 23 radiocarbon ages of ancient Japanese documents, sutras and printed books. The calibrated radiocarbon ages are in good agreement with the corresponding historical ages. It was shown by radiocarbon dating of the ancient documents that Japanese paper has little gap by 'old wood effect'; accordingly, ancient Japanese paper is a suitable sample for radiocarbon dating of recent historic period. (author)

  7. Document flow segmentation for business applications

    Science.gov (United States)

    Daher, Hani; Belaïd, Abdel

    2013-12-01

    The aim of this paper is to propose a document flow supervised segmentation approach applied to real world heterogeneous documents. Our algorithm treats the flow of documents as couples of consecutive pages and studies the relationship that exists between them. At first, sets of features are extracted from the pages where we propose an approach to model the couple of pages into a single feature vector representation. This representation will be provided to a binary classifier which classifies the relationship as either segmentation or continuity. In case of segmentation, we consider that we have a complete document and the analysis of the flow continues by starting a new document. In case of continuity, the couple of pages are assimilated to the same document and the analysis continues on the flow. If there is an uncertainty on whether the relationship between the couple of pages should be classified as a continuity or segmentation, a rejection is decided and the pages analyzed until this point are considered as a "fragment". The first classification already provides good results approaching 90% on certain documents, which is high at this level of the system.

  8. Precise Documentation: The Key to Better Software

    Science.gov (United States)

    Parnas, David Lorge

    The prime cause of the sorry “state of the art” in software development is our failure to produce good design documentation. Poor documentation is the cause of many errors and reduces efficiency in every phase of a software product's development and use. Most software developers believe that “documentation” refers to a collection of wordy, unstructured, introductory descriptions, thousands of pages that nobody wanted to write and nobody trusts. In contrast, Engineers in more traditional disciplines think of precise blueprints, circuit diagrams, and mathematical specifications of component properties. Software developers do not know how to produce precise documents for software. Software developments also think that documentation is something written after the software has been developed. In other fields of Engineering much of the documentation is written before and during the development. It represents forethought not afterthought. Among the benefits of better documentation would be: easier reuse of old designs, better communication about requirements, more useful design reviews, easier integration of separately written modules, more effective code inspection, more effective testing, and more efficient corrections and improvements. This paper explains how to produce and use precise software documentation and illustrate the methods with several examples.

  9. 49 CFR 192.7 - What documents are incorporated by reference partly or wholly in this part?

    Science.gov (United States)

    2010-10-01

    ... “Recommended Practice 1165 “Recommended Practice for Pipeline SCADA Displays,” (API RP 1165) (First edition..., effective March 1, 1997) § 192.65(b). (4) ANSI/API Specification 6D, “Specification for Pipeline Valves..., Appendix B. (7) API Recommended Practice 1162, “Public Awareness Programs for Pipeline Operators,” (1st...

  10. Instructions for submittal and control of FFTF design documents and design related documentation

    International Nuclear Information System (INIS)

    Grush, R.E.

    1976-10-01

    This document provides the system and requirements for management of FFTF technical data prepared by Westinghouse Hanford (HEDL), and design contractors, the construction contractor and lower tier equipment suppliers. Included in this document are provisions for the review, approval, release, change control, and accounting of FFTF design disclosure and base documentation. Also included are provisions for submittal of other design related documents for review and approval consistent with applicable requirements of RDT-Standard F 2-2, ''Quality Assurance Program Requirements.''

  11. Incorporating International Business Topics into Every Class.

    Science.gov (United States)

    Perreault, Heidi; Burchfield, Kathy

    2001-01-01

    Presents activities and resources for addressing international business in the curriculum, including e-mail partnerships, international document specifications, currency comparisons, marketing to other cultures, scavenger hunt, business lunch, and international telephone and travel etiquette. (SK)

  12. TWRS technical baseline database manager definition document

    International Nuclear Information System (INIS)

    Acree, C.D.

    1997-01-01

    This document serves as a guide for using the TWRS Technical Baseline Database Management Systems Engineering (SE) support tool in performing SE activities for the Tank Waste Remediation System (TWRS). This document will provide a consistent interpretation of the relationships between the TWRS Technical Baseline Database Management software and the present TWRS SE practices. The Database Manager currently utilized is the RDD-1000 System manufactured by the Ascent Logic Corporation. In other documents, the term RDD-1000 may be used interchangeably with TWRS Technical Baseline Database Manager

  13. TWRS configuration management requirement source document

    International Nuclear Information System (INIS)

    Vann, J.M.

    1997-01-01

    The TWRS Configuration Management (CM) Requirement Source document prescribes CM as a basic product life-cycle function by which work and activities are conducted or accomplished. This document serves as the requirements basis for the TWRS CM program. The objective of the TWRS CM program is to establish consistency among requirements, physical/functional configuration, information, and documentation for TWRS and TWRS products, and to maintain this consistency throughout the life-cycle of TWRS and the product, particularly as changes are being made

  14. Electronic document management systems: an overview.

    Science.gov (United States)

    Kohn, Deborah

    2002-08-01

    For over a decade, most health care information technology (IT) professionals erroneously learned that document imaging, which is one of the many component technologies of an electronic document management system (EDMS), is the only technology of an EDMS. In addition, many health care IT professionals erroneously believed that EDMSs have either a limited role or no place in IT environments. As a result, most health care IT professionals do not understand documents and unstructured data and their value as structured data partners in most aspects of transaction and information processing systems.

  15. Electronic document management at Sizewell B

    International Nuclear Information System (INIS)

    Rippon, Simon.

    1996-01-01

    Sizewell ''B'', Britain's first PWR, officially opened on March 25 1996, will now rely for its document management on a sophisticated computer-based system. One of the largest single engineering projects ever to be commissioned on one site in Britain, Sizewell ''B'' accommodates more than 300,000 documents, including over 200,000 drawings. The electronic document management system will provide a number of important benefits, including a more direct method of maintaining the station's Configuration Management and hence maintaining high safety standards; improved turnaround in plant modification proposals (PMP); significant time and cost savings in managing vital records; and increased productivity. (Author)

  16. Sistema de gestión documental

    OpenAIRE

    Fernández Gómez, Javier

    2015-01-01

    Esta memoria expone la planificación, el análisis, el diseño y el desarrollo de un sistema de gestión documental, en adelante SGD, configurable, es decir, adaptable a un ámbito determinado. El SGD consta de dos grupos de interfaces o funcionalidades claramente diferenciadas: administración y gestión documental. Aquesta memòria exposa la planificació, l'anàlisi, el disseny i el desenvolupament d'un sistema de gestió documental, d'ara endavant SGA, configurable, és a dir, adaptable a un àmbi...

  17. Software documentation for TRU certification program

    International Nuclear Information System (INIS)

    CLINTON, R.

    1999-01-01

    The document provides validation information for software used to support TRU operational activities. Calculations were performed using a spreadsheet application. This document provides information about the usage of the software application, Microsoft(reg s ign) Excel. Microsoft(reg s ign) Excel spreadsheets were used to perform specific calculations to determine the amount of containers to visually examine and to perform analyses on container head-gas data. Contained in this document are definitions of formulas and variables with relation to the Excel codes used. Also, a demonstration is provided using predetermined values to obtain predetermined results

  18. Document Level Assessment of Document Retrieval Systems in a Pairwise System Evaluation

    Science.gov (United States)

    Rajagopal, Prabha; Ravana, Sri Devi

    2017-01-01

    Introduction: The use of averaged topic-level scores can result in the loss of valuable data and can cause misinterpretation of the effectiveness of system performance. This study aims to use the scores of each document to evaluate document retrieval systems in a pairwise system evaluation. Method: The chosen evaluation metrics are document-level…

  19. Extended Subject Access to Hypertext Online Documentation. Part III: The Document-Boundaries Problem.

    Science.gov (United States)

    Girill, T. R.

    1991-01-01

    This article continues the description of DFT (Document, Find, Theseus), an online documentation system that provides computer-managed on-demand printing of software manuals as well as the interactive retrieval of reference passages. Document boundaries in the hypertext database are discussed, search vocabulary complexities are described, and text…

  20. Trust Mines: Legal Documents and Settlements

    Science.gov (United States)

    Legal Documents and Settlements related to the Northern Abandoned Uranium Mines Region including the Phase 1 Settlement Agreement and Environmental Response Trust Agreement, Phase 2 Settlement Agreement Removal Site Evaluation (RSE) Trust Agreement.

  1. Replacement Saltwell Pumping System Document Bibliography

    International Nuclear Information System (INIS)

    BELLOMY, J.R.

    2000-01-01

    This document bibliography is prepared to identify engineering documentation developed during the design of the Replacement Saltwell Pumping System. The bibliography includes all engineering supporting documents and correspondence prepared prior to the deployment of the system in the field. All documents referenced are available electronically through the Records Management Information System (RMIS). Major components of the Replacement Saltwell Pumping System include the Sundyne Canned Motor Pump, the Water Filter Skid, the Injection Water Skid and the Backflow Preventer Assembly. Drawing H-14-104498 provides an index of drawings (fabrication details, PandIDs, etc.) prepared to support development of the Replacement Saltwell Pumping System. Specific information pertaining to new equipment can be found in Certified Vendor Information (CVI) File 50124. This CVI file has been established specifically for new equipment associated with the Replacement Saltwell Pumping System

  2. RPP Environmental Permits and Related Documentation

    International Nuclear Information System (INIS)

    DEXTER, M.L.

    2001-01-01

    This document contains the current list of environmental permits and related documentation for RPP facilities and activities. Copies of these permits and related approvals are maintained by RPP Environmental. In addition, notices of Correction and Notices of Violation are issued by State and Federal Regulators which are tracked by RPP Environmental to resolve any recently identified deficiencies. A listing of these recent Notices is provided as an attachment to this document. These permits, approval conditions, and recent regulatory agency notices, constitute an important element of the RPP Authorization Envelope. Permits are issued frequently and the reader is advised to check with RPP environmental for new permits or approval conditions. Interpretation of permit or approval conditions should be coordinated with RPP Environmental. This document is updated on a quarterly basis

  3. Documenting and disseminating agricultural indigenous knowledge ...

    African Journals Online (AJOL)

    Documenting and disseminating agricultural indigenous knowledge for sustainable food security in Uganda. ... University of Dar es Salaam Library Journal ... Moreover, small-scale farmers should be involved in agricultural extension services ...

  4. Regulatory systems-based licensing guidance documentation

    International Nuclear Information System (INIS)

    Delligatti, M.S.

    1991-01-01

    The US Nuclear Regulatory Commission (NRC) has developed a series of licensing guidance documents based on the regulatory requirements in Part 60 of Title 10 of the Code of Federal Regulations (10 CFR Part 60). This regulatory systems-based approach to licensing guidance documentation relies on the definition of the high-level waste repository in 10 CFR Part 60. A document which is important for the frame-work it gives to other programmatic licensing guidance is the Draft Regulatory Guide open-quotes Format and Content for the License Application for the High-Level Waste Repositoryclose quotes (FCRG). The FCRG describes a format and content acceptable to NRC for a high-level waste repository license application pursuant to the requirements of 10 CFR Part 60. Other licensing guidance documents will be compatible with the FCRG

  5. Environment, Health, and Safety - Construction Subcontractors Documents |

    Science.gov (United States)

    NREL Environment, Health, and Safety - Construction Subcontractors Documents Environment Environment, Health and Safety (EH&S) requirements are understood by construction subcontractors and with these requirements before submitting proposals and/or environment, health and safety plans for the

  6. Integrated system for automated financial document processing

    Science.gov (United States)

    Hassanein, Khaled S.; Wesolkowski, Slawo; Higgins, Ray; Crabtree, Ralph; Peng, Antai

    1997-02-01

    A system was developed that integrates intelligent document analysis with multiple character/numeral recognition engines in order to achieve high accuracy automated financial document processing. In this system, images are accepted in both their grayscale and binary formats. A document analysis module starts by extracting essential features from the document to help identify its type (e.g. personal check, business check, etc.). These features are also utilized to conduct a full analysis of the image to determine the location of interesting zones such as the courtesy amount and the legal amount. These fields are then made available to several recognition knowledge sources such as courtesy amount recognition engines and legal amount recognition engines through a blackboard architecture. This architecture allows all the available knowledge sources to contribute incrementally and opportunistically to the solution of the given recognition query. Performance results on a test set of machine printed business checks using the integrated system are also reported.

  7. Non-disability Repository for Evidentiary Documents

    Data.gov (United States)

    Social Security Administration — Contains data that supports the electronic storage of paper documents or electronic files not addressed by other initiatives such as electronic Disability (eDib) and...

  8. Local public document room directory. Revision 7

    International Nuclear Information System (INIS)

    1998-04-01

    This directory (NUREG/BR-0088, Revision 7) lists local public document rooms (LPDRs) for commercial nuclear power plants with operating or possession-only licenses or under construction, plus the LPDRs for potential high-level radioactive waste repository sites, gaseous diffusion plants, certain fuel cycle facilities, certain low-level waste disposal facilities, and any temporary LPDRs established for the duration of licensing proceedings. In some instances, the LPDR libraries maintain document collections for more than one licensed facility. The library staff members listed are the persons most familiar with the LPDR collections. Reference librarians in the NRC Headquarters Public Document Room (PDR) are also available to assist the public in locating NRC documents

  9. Multisource data fusion for documenting archaeological sites

    Science.gov (United States)

    Knyaz, Vladimir; Chibunichev, Alexander; Zhuravlev, Denis

    2017-10-01

    The quality of archaeological sites documenting is of great importance for cultural heritage preserving and investigating. The progress in developing new techniques and systems for data acquisition and processing creates an excellent basis for achieving a new quality of archaeological sites documenting and visualization. archaeological data has some specific features which have to be taken into account when acquiring, processing and managing. First of all, it is a needed to gather as full as possible information about findings providing no loss of information and no damage to artifacts. Remote sensing technologies are the most adequate and powerful means which satisfy this requirement. An approach to archaeological data acquiring and fusion based on remote sensing is proposed. It combines a set of photogrammetric techniques for obtaining geometrical and visual information at different scales and detailing and a pipeline for archaeological data documenting, structuring, fusion, and analysis. The proposed approach is applied for documenting of Bosporus archaeological expedition of Russian State Historical Museum.

  10. Precise documentation of well-structured programs

    Energy Technology Data Exchange (ETDEWEB)

    Parnas, D.L.; Madey, J.; Iglewski, M. [McMaster Univ., Hamilton, Ontario (Canada)

    1997-11-01

    This paper describes a new form of program documentation that is precise, systematic and readable. This documentation comprises a set of displays supplemented by a lexicon and an index. Each display presents a program fragment in such a way that its correctness can be examined without looking at any other display. Each display has three parts: (1) the specification of the program presented in the display, (2) the program itself, and (3) the specifications of programs invoked by this program. The displays are intended to be used by Software Engineers as a reference document during inspection and maintenance. This paper also introduces a specification technique that is a refinement of Mills functional approach to program documentation and verification; programs are specified and described in tabular form.

  11. On Logic and Standards for Structuring Documents

    Science.gov (United States)

    Eyers, David M.; Jones, Andrew J. I.; Kimbrough, Steven O.

    The advent of XML has been widely seized upon as an opportunity to develop document representation standards that lend themselves to automated processing. This is a welcome development and much good has come of it. That said, present standardization efforts may be criticized on a number of counts. We explore two issues associated with document XML standardization efforts. We label them (i) the dynamic point and (ii) the logical point. Our dynamic point is that in many cases experience has shown that the search for a final, or even reasonably permanent, document representation standard is futile. The case is especially strong for electronic data interchange (EDI). Our logical point is that formalization into symbolic logic is materially helpful for understanding and designing dynamic document standards.

  12. Document imaging finding niche in petroleum industry

    International Nuclear Information System (INIS)

    Cisco, S.L.

    1992-01-01

    Optical disk-based document imaging systems can reduce operating costs, save office space, and improve access to necessary information for petroleum companies that have extensive records in various formats. These imaging systems help solve document management problems to improve technical and administrative operations. Enron Gas Pipeline Group has installed a document imaging system for engineering applications to integrate records stored on paper, microfilm, or computer-aided drafting (CAD) systems. BP Exploration Inc. recently implemented a document imaging system for administrative applications. The company is evaluating an expansion of the system to include engineering and technical applications. The petroleum industry creates, acquires, distributes, and retrieves enormous amounts of data and information, which are stored on multiple media, including paper, microfilm, and electronic formats. There are two main factors responsible for the immense information storage requirements in the petroleum industry

  13. Utility Energy Services Contracts: Enabling Documents

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Karen; Vasquez, Deb

    2017-01-01

    The Federal Energy Management Program's 'Utility Energy Service Contracts: Enabling Documents' provide legislative information and materials that clarify the authority for federal agencies to enter into utility energy service contracts, or UESCs.

  14. RPP Environmental Permits and Related Documentation

    International Nuclear Information System (INIS)

    DEXTER, M.L.

    2000-01-01

    This document contains the current list of environmental permits and related documentation for RPP facilities and activities. Copies of these permits and related approvals are maintained by RPP Environmental. In addition, Notices of Correction and Notices of Violation are issued by State and Federal Regulators which are tracked by RPP Environmental to resolve any recently identified deficiencies. A listing of these recent Notices is provided as an attachment to this document. These permits, approval conditions, and recent regulatory agency notices, constitute an important element of the RPP Authorization Envelope. Permits are issued frequently and the reader is advised to check with RPP environmental for new permits or approval conditions. Interpretation of permit or approval conditions should be coordinated with RPP Environmental. This document will be updated on a quarterly basis

  15. Does pedagogical documentation support maternal reminiscing conversations?

    Directory of Open Access Journals (Sweden)

    Bethany Fleck

    2015-12-01

    Full Text Available When parents talk with their children about lessons learned in school, they are participating in reminiscing of an unshared event. This study sought to understand if pedagogical documentation, from the Reggio Approach to early childhood education, would support and enhance the conversation. Mother–child dyads reminisced two separate times about preschool lessons, one time with documentation available to them and one time without. Transcripts were coded extracting variables indicative of high and low maternal reminiscing styles. Results indicate that mother and child conversation characteristics were more highly elaborative when documentation was present than when it was not. In addition, children added more information to the conversation supporting the notion that such conversations enhanced memory for lessons. Documentation could be used as a support tool for conversations and children’s memory about lessons learned in school.

  16. Documenting Penicillin Allergy: The Impact of Inconsistency

    Science.gov (United States)

    Shah, Nirav S.; Ridgway, Jessica P.; Pettit, Natasha; Fahrenbach, John; Robicsek, Ari

    2016-01-01

    Background Allergy documentation is frequently inconsistent and incomplete. The impact of this variability on subsequent treatment is not well described. Objective To determine how allergy documentation affects subsequent antibiotic choice. Design Retrospective, cohort study. Participants 232,616 adult patients seen by 199 primary care providers (PCPs) between January 1, 2009 and January 1, 2014 at an academic medical system. Main Measures Inter-physician variation in beta-lactam allergy documentation; antibiotic treatment following beta-lactam allergy documentation. Key Results 15.6% of patients had a reported beta-lactam allergy. Of those patients, 39.8% had a specific allergen identified and 22.7% had allergic reaction characteristics documented. Variation between PCPs was greater than would be expected by chance (all ppenicillins”) (24.0% to 58.2%) and documentation of the reaction characteristics (5.4% to 51.9%). After beta-lactam allergy documentation, patients were less likely to receive penicillins (Relative Risk [RR] 0.16 [95% Confidence Interval: 0.15–0.17]) and cephalosporins (RR 0.28 [95% CI 0.27–0.30]) and more likely to receive fluoroquinolones (RR 1.5 [95% CI 1.5–1.6]), clindamycin (RR 3.8 [95% CI 3.6–4.0]) and vancomycin (RR 5.0 [95% CI 4.3–5.8]). Among patients with beta-lactam allergy, rechallenge was more likely when a specific allergen was identified (RR 1.6 [95% CI 1.5–1.8]) and when reaction characteristics were documented (RR 2.0 [95% CI 1.8–2.2]). Conclusions Provider documentation of beta-lactam allergy is highly variable, and details of the allergy are infrequently documented. Classification of a patient as beta-lactam allergic and incomplete documentation regarding the details of the allergy lead to beta-lactam avoidance and use of other antimicrobial agents, behaviors that may adversely impact care quality and cost. PMID:26981866

  17. Using color management in color document processing

    Science.gov (United States)

    Nehab, Smadar

    1995-04-01

    Color Management Systems have been used for several years in Desktop Publishing (DTP) environments. While this development hasn't matured yet, we are already experiencing the next generation of the color imaging revolution-Device Independent Color for the small office/home office (SOHO) environment. Though there are still open technical issues with device independent color matching, they are not the focal point of this paper. This paper discusses two new and crucial aspects in using color management in color document processing: the management of color objects and their associated color rendering methods; a proposal for a precedence order and handshaking protocol among the various software components involved in color document processing. As color peripherals become affordable to the SOHO market, color management also becomes a prerequisite for common document authoring applications such as word processors. The first color management solutions were oriented towards DTP environments whose requirements were largely different. For example, DTP documents are image-centric, as opposed to SOHO documents that are text and charts centric. To achieve optimal reproduction on low-cost SOHO peripherals, it is critical that different color rendering methods are used for the different document object types. The first challenge in using color management of color document processing is the association of rendering methods with object types. As a result of an evolutionary process, color matching solutions are now available as application software, as driver embedded software and as operating system extensions. Consequently, document processing faces a new challenge, the correct selection of the color matching solution while avoiding duplicate color corrections.

  18. Coordonnateur, Gestion des documents | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Classifier, indexer, faire des références croisées et identifier les documents relatifs aux projets et aux activités administratives du CRDI en attribuant, conformément au plan de classification des documents du Centre, le numéro de dossier et le titre appropriés de chaque dossier et les mots-clés servant à la recherche;.

  19. Definition and documentation of engineering processes

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, G.W. [Sandia National Labs., Albuquerque, NM (United States)

    1997-11-01

    This tutorial is an extract of a two-day workshop developed under the auspices of the Quality Engineering Department at Sandia National Laboratories. The presentation starts with basic definitions and addresses why processes should be defined and documented. It covers three primary topics: (1) process considerations and rationale, (2) approach to defining and documenting engineering processes, and (3) an IDEFO model of the process for defining engineering processes.

  20. Managing the consistency of distributed documents

    OpenAIRE

    Nentwich, C.

    2005-01-01

    Many businesses produce documents as part of their daily activities: software engineers produce requirements specifications, design models, source code, build scripts and more; business analysts produce glossaries, use cases, organisation charts, and domain ontology models; service providers and retailers produce catalogues, customer data, purchase orders, invoices and web pages. What these examples have in common is that the content of documents is often semantically relate...

  1. Title list of documents made publicly available

    International Nuclear Information System (INIS)

    1990-04-01

    This document is a monthly publication containing descriptions of information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. The following indexes are included: Personal Author, Corporate Source, Report Number, and Cross Reference to Principal Documents

  2. Semantic Similarity between Web Documents Using Ontology

    Science.gov (United States)

    Chahal, Poonam; Singh Tomer, Manjeet; Kumar, Suresh

    2018-06-01

    The World Wide Web is the source of information available in the structure of interlinked web pages. However, the procedure of extracting significant information with the assistance of search engine is incredibly critical. This is for the reason that web information is written mainly by using natural language, and further available to individual human. Several efforts have been made in semantic similarity computation between documents using words, concepts and concepts relationship but still the outcome available are not as per the user requirements. This paper proposes a novel technique for computation of semantic similarity between documents that not only takes concepts available in documents but also relationships that are available between the concepts. In our approach documents are being processed by making ontology of the documents using base ontology and a dictionary containing concepts records. Each such record is made up of the probable words which represents a given concept. Finally, document ontology's are compared to find their semantic similarity by taking the relationships among concepts. Relevant concepts and relations between the concepts have been explored by capturing author and user intention. The proposed semantic analysis technique provides improved results as compared to the existing techniques.

  3. Semantic Similarity between Web Documents Using Ontology

    Science.gov (United States)

    Chahal, Poonam; Singh Tomer, Manjeet; Kumar, Suresh

    2018-03-01

    The World Wide Web is the source of information available in the structure of interlinked web pages. However, the procedure of extracting significant information with the assistance of search engine is incredibly critical. This is for the reason that web information is written mainly by using natural language, and further available to individual human. Several efforts have been made in semantic similarity computation between documents using words, concepts and concepts relationship but still the outcome available are not as per the user requirements. This paper proposes a novel technique for computation of semantic similarity between documents that not only takes concepts available in documents but also relationships that are available between the concepts. In our approach documents are being processed by making ontology of the documents using base ontology and a dictionary containing concepts records. Each such record is made up of the probable words which represents a given concept. Finally, document ontology's are compared to find their semantic similarity by taking the relationships among concepts. Relevant concepts and relations between the concepts have been explored by capturing author and user intention. The proposed semantic analysis technique provides improved results as compared to the existing techniques.

  4. NASA software documentation standard software engineering program

    Science.gov (United States)

    1991-01-01

    The NASA Software Documentation Standard (hereinafter referred to as Standard) can be applied to the documentation of all NASA software. This Standard is limited to documentation format and content requirements. It does not mandate specific management, engineering, or assurance standards or techniques. This Standard defines the format and content of documentation for software acquisition, development, and sustaining engineering. Format requirements address where information shall be recorded and content requirements address what information shall be recorded. This Standard provides a framework to allow consistency of documentation across NASA and visibility into the completeness of project documentation. This basic framework consists of four major sections (or volumes). The Management Plan contains all planning and business aspects of a software project, including engineering and assurance planning. The Product Specification contains all technical engineering information, including software requirements and design. The Assurance and Test Procedures contains all technical assurance information, including Test, Quality Assurance (QA), and Verification and Validation (V&V). The Management, Engineering, and Assurance Reports is the library and/or listing of all project reports.

  5. Blood pressure documentation in the emergency department

    Science.gov (United States)

    Daniel, Ana Carolina Queiroz Godoy; Machado, Juliana Pereira; Veiga, Eugenia Velludo

    2017-01-01

    ABSTRACT Objective To analyze the frequency of blood pressure documentation performed by nursing professionals in an emergency department. Methods This is a cross-sectional, observational, descriptive, and analytical study, which included medical records of adult patients admitted to the observation ward of an emergency department, between March and May 2014. Data were obtained through a collection instrument divided into three parts: patient identification, triage data, and blood pressure documentation. For statistical analysis, Pearson’s correlation coefficient was used, with a significance level of α<0.05. Results One hundred fifty-seven records and 430 blood pressure measurements were analyzed with an average of three measurements per patient. Of these measures, 46.5% were abnormal. The mean time from admission to documentation of the first blood pressure measurement was 2.5 minutes, with 42 minutes between subsequent measures. There is no correlation between the systolic blood pressure values and the mean time interval between blood pressure documentations: 0.173 (p=0.031). Conclusion The present study found no correlation between frequency of blood pressure documentation and blood pressure values. The frequency of blood pressure documentation increased according to the severity of the patient and decreased during the length of stay in the emergency department. PMID:28444085

  6. Designing Documents for People to Use

    Directory of Open Access Journals (Sweden)

    David Sless

    Full Text Available This article reports on the work of Communication Research Institute (CRI, an international research center specializing in communication and information design. With the support of government, regulators, industry bodies, and business—and with the participation of people and their advocates—CRI has worked on over 200 public document design projects since it began as a small unit in 1985. CRI investigates practical methods and achievable standards for designing digital and paper public documents, including forms; workplace procedural notices; bills, letters, and emails sent by organizations; labels and instructions that accompany products and services; and legal and financial documents and contracts. CRI has written model grammars for the document types it designs, and the cumulative data from CRI projects has led to a set of systematic methods for designing public-use documents to a high standard. Through research, design, publishing, and advocacy, CRI works to measurably improve the ordinary documents we all have to use. Keywords: Information design, Design methods, Design standards, Communication design, Design diagnostic testing, Design research

  7. Critical issues in an electronic documentation system.

    Science.gov (United States)

    Weir, Charlene R; Nebeker, Jonathan R

    2007-10-11

    The Veterans Health Administration (VHA), of the U.S. Department of Veteran Affairs has instituted a medical record (EMR) that includes electronic documentation of all narrative components of the medical record. To support clinicians using the system, multiple efforts have been instituted to ease the creation of narrative reports. Although electronic documentation is easier to read and improves access to information, it also may create new and additional hazards for users. This study is the first step in a series of studies to evaluate the issues surrounding the creation and use of electronic documentation. Eighty-eight providers across multiple clinical roles were interviewed in 10 primary care sites in the VA system. Interviews were tape-recorded, transcribed and qualitatively analyzed for themes. In addition, specific questions were asked about perceived harm due to electronic documentation practices. Five themes relating to difficulties with electronic documentation were identified: 1) information overload; 2) hidden information; 3) lack of trust; 4) communication; 5) decision-making. Three providers reported that they knew of an incident where current documentation practices had caused patient harm and over 75% of respondents reported significant mis-trust of the system.

  8. Functional characterisation of romeharsha and clint1 reaffirms the ...

    Indian Academy of Sciences (India)

    40

    zebrafish, epidermis development, intracellular transport, homeostasis, ... in humans (Holbrook and Odland 1975; M'Boneko and Merker 1988; Akiyama ..... penetrance index as percentage of rhs mutant embryos, identified based on vesicular.

  9. The Reaffirmation of Cultural Identity in Cross-cultural Encounters.

    Science.gov (United States)

    Kosmitzki, Corinne

    1996-01-01

    Examines the relationship between cultural contact and cultural identity as conceptualized in two research approaches: social identity theory and acculturation. The groups studied were German and Americans who either lived in their nonnative culture or had no direct contact. Comparisons between bicultural and monocultural groups revealed a…

  10. Robinson's radiation damping sum rule: Reaffirmation and extension

    International Nuclear Information System (INIS)

    Mane, S.R.

    2011-01-01

    Robinson's radiation damping sum rule is one of the classic theorems of accelerator physics. Recently Orlov has claimed to find serious flaws in Robinson's proof of his sum rule. In view of the importance of the subject, I have independently examined the derivation of the Robinson radiation damping sum rule. Orlov's criticisms are without merit: I work through Robinson's derivation and demonstrate that Orlov's criticisms violate well-established mathematical theorems and are hence not valid. I also show that Robinson's derivation, and his damping sum rule, is valid in a larger domain than that treated by Robinson himself: Robinson derived his sum rule under the approximation of a small damping rate, but I show that Robinson's sum rule applies to arbitrary damping rates. I also display more concise derivations of the sum rule using matrix differential equations. I also show that Robinson's sum rule is valid in the vicinity of a parametric resonance.

  11. Genetic incorporation of recycled unnatural amino acids.

    Science.gov (United States)

    Ko, Wooseok; Kim, Sanggil; Jo, Kyubong; Lee, Hyun Soo

    2016-02-01

    The genetic incorporation of unnatural amino acids (UAAs) into proteins has been a useful tool for protein engineering. However, most UAAs are expensive, and the method requires a high concentration of UAAs, which has been a drawback of the technology, especially for large-scale applications. To address this problem, a method to recycle cultured UAAs was developed. The method is based on recycling a culture medium containing the UAA, in which some of essential nutrients were resupplemented after each culture cycle, and induction of protein expression was controlled with glucose. Under optimal conditions, five UAAs were recycled for up to seven rounds of expression without a decrease in expression level, cell density, or incorporation fidelity. This method can generally be applied to other UAAs; therefore, it is useful for reducing the cost of UAAs for genetic incorporation and helpful for expanding the use of the technology to industrial applications.

  12. Recommendation for the application of the guideline for incorporation monitoring in nuclear medicine; Empfehlung fuer die Anwendung der Richtlinie zur Inkorporationsueberwachung in der Nuklearmedizin

    Energy Technology Data Exchange (ETDEWEB)

    Schoenmuth, T. [Verein fuer Kernverfahrenstechnik und Analytik Rossendorf e.V. (VKTA), Dresden (Germany); Dalheimer, A. [Bundesamt fuer Strahlenschutz (Germany); Eckardt, J. [Universitaetsklinikum Muenster (Germany); Eschner, W. [Universitaetsklinikum Koeln (Germany); Kratzel, U. [LfU Bayern (Germany); Lassmann, M. [Universitaetsklinikum Wuerzburg (Germany); Lauterbach, H. [Universitaetsklinikum Jena (Germany); Dettmann, K.

    2009-07-01

    For the use of open radioactive materials in the nuclear medicine a recommendation should give assistance by the judgement of the draught suggested by the user according to the guideline 'Incorporation monitoring' to the responsible authorities. To the evaluation of the requirement for a regular monitoring the document delivers recommendations for incorporation factors or use of threshold value measurements. (orig.)

  13. Activity incorporation into zinc doped PWR oxides

    International Nuclear Information System (INIS)

    Maekelae, Kari

    1998-01-01

    Activity incorporation into the oxide layers of PWR primary circuit constructional materials has been studied in Halden since 1993. The first zinc injection tests showed that zinc addition resulted in thinner oxide layers on new metal surfaces and reduced further incorporation of activity into already existing oxides. These tests were continued to find out the effects of previous zinc additions on the pickup of activity onto the surface oxides which were subsequently exposed to zinc-free coolant. The results showed that previous zinc addition will continue to reduce the rate of Co-60 build-up on out-of-core surfaces in subsequent exposure to zinc-free coolants. However, the previous Zn free test was performed for a relatively short period of time and the water chemistry programme was continued to find out the long term effects for extended periods without zinc. The activity incorporation into the stainless steel oxides started to increase as soon as zinc dosing to the coolant was stopped. The Co-60 concentration was lowest on all of the coupons which were first oxidised in Zn containing primary coolant. After the zinc injection period the thickness of the oxides increased, but activity in the oxide films did not increase at the same rate. This could indicate that zinc in the oxide blocks the adsorption sites for Co-60 incorporation. The Co-60 incorporation rate into the oxides on Inconel 600 seemed to be linear whether the oxide was pre-oxidised with or without Zn. The results indicate that zinc can either replace or prevent cobalt transport in the oxides. The results show that for zinc injection to be effective it should be carried out continuously. Furthermore the actual mechanism by which Zn inhibits the activity incorporation into the oxides is still not clear. Therefore, additional work has to follow with specified materials to verify the conclusions drawn in this work. (author)

  14. Future CANDU nuclear power plant design requirements document executive summary

    International Nuclear Information System (INIS)

    Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young; S. A. Usmani

    1996-03-01

    The future CANDU Requirements Document (FCRED) describes a clear and complete statement of utility requirements for the next generation of CANDU nuclear power plants including those in Korea. The requirements are based on proven technology of PHWR experience and are intended to be consistent with those specified in the current international requirement documents. Furthermore, these integrated set of design requirements, incorporate utility input to the extent currently available and assure a simple, robust and more forgiving design that enhances the performance and safety. The FCRED addresses the entire plant, including the nuclear steam supply system and the balance of the plant, up to the interface with the utility grid at the distribution side of the circuit breakers which connect the switchyard to the transmission lines. Requirements for processing of low level radioactive waste at the plant site and spent fuel storage requirements are included in the FCRED. Off-site waste disposal is beyond the scope of the FCRED. 2 tabs., 1 fig. (Author) .new

  15. Extra dimensions: 3D and time in PDF documentation

    International Nuclear Information System (INIS)

    Graf, N A

    2011-01-01

    Experimental science is replete with multi-dimensional information which is often poorly represented by the two dimensions of presentation slides and print media. Past efforts to disseminate such information to a wider audience have failed for a number of reasons, including a lack of standards which are easy to implement and have broad support. Adobe's Portable Document Format (PDF) has in recent years become the de facto standard for secure, dependable electronic information exchange. It has done so by creating an open format, providing support for multiple platforms and being reliable and extensible. By providing support for the ECMA standard Universal 3D (U3D) file format in its free Adobe Reader software, Adobe has made it easy to distribute and interact with 3D content. By providing support for scripting and animation, temporal data can also be easily distributed to a wide, non-technical audience. We discuss how the field of radiation imaging could benefit from incorporating full 3D information about not only the detectors, but also the results of the experimental analyses, in its electronic publications. In this article, we present examples drawn from high-energy physics, mathematics and molecular biology which take advantage of this functionality. We demonstrate how 3D detector elements can be documented, using either CAD drawings or other sources such as GEANT visualizations as input.

  16. Extra dimensions: 3d and time in pdf documentation

    Energy Technology Data Exchange (ETDEWEB)

    Graf, N A [Stanford Linear Accelerator Center, Menlo Park, CA, 94025 (United States)], E-mail: Norman.Graf@slac.stanford.edu

    2008-07-15

    High energy physics is replete with multi-dimensional information which is often poorly represented by the two dimensions of presentation slides and print media. Past efforts to disseminate such information to a wider audience have failed for a number of reasons, including a lack of standards which are easy to implement and have broad support. Adobe's Portable Document Format (PDF) has in recent years become the de facto standard for secure, dependable electronic information exchange. It has done so by creating an open format, providing support for multiple platforms and being reliable and extensible. By providing support for the ECMA standard Universal 3D (U3D) file format in its free Adobe Reader software, Adobe has made it easy to distribute and interact with 3D content. By providing support for scripting and animation, temporal data can also be easily distributed to a wide audience. In this talk, we present examples of HEP applications which take advantage of this functionality. We demonstrate how 3D detector elements can be documented, using either CAD drawings or other sources such as GEANT visualizations as input. Using this technique, higher dimensional data, such as LEGO plots or time-dependent information can be included in PDF files. In principle, a complete event display, with full interactivity, can be incorporated into a PDF file. This would allow the end user not only to customize the view and representation of the data, but to access the underlying data itself.

  17. Extra dimensions: 3d and time in pdf documentation

    International Nuclear Information System (INIS)

    Graf, N A

    2008-01-01

    High energy physics is replete with multi-dimensional information which is often poorly represented by the two dimensions of presentation slides and print media. Past efforts to disseminate such information to a wider audience have failed for a number of reasons, including a lack of standards which are easy to implement and have broad support. Adobe's Portable Document Format (PDF) has in recent years become the de facto standard for secure, dependable electronic information exchange. It has done so by creating an open format, providing support for multiple platforms and being reliable and extensible. By providing support for the ECMA standard Universal 3D (U3D) file format in its free Adobe Reader software, Adobe has made it easy to distribute and interact with 3D content. By providing support for scripting and animation, temporal data can also be easily distributed to a wide audience. In this talk, we present examples of HEP applications which take advantage of this functionality. We demonstrate how 3D detector elements can be documented, using either CAD drawings or other sources such as GEANT visualizations as input. Using this technique, higher dimensional data, such as LEGO plots or time-dependent information can be included in PDF files. In principle, a complete event display, with full interactivity, can be incorporated into a PDF file. This would allow the end user not only to customize the view and representation of the data, but to access the underlying data itself

  18. Incorporating Duration Information in Activity Recognition

    Science.gov (United States)

    Chaurasia, Priyanka; Scotney, Bryan; McClean, Sally; Zhang, Shuai; Nugent, Chris

    Activity recognition has become a key issue in smart home environments. The problem involves learning high level activities from low level sensor data. Activity recognition can depend on several variables; one such variable is duration of engagement with sensorised items or duration of intervals between sensor activations that can provide useful information about personal behaviour. In this paper a probabilistic learning algorithm is proposed that incorporates episode, time and duration information to determine inhabitant identity and the activity being undertaken from low level sensor data. Our results verify that incorporating duration information consistently improves the accuracy.

  19. Therapy for incorporated radionuclides: scope and need

    International Nuclear Information System (INIS)

    Smith, V.H.

    1981-03-01

    In the United States the recent termination of funding for research on therapy for incorporated radionuclides has virtually halted progress on improved or new agents and procedures for removing radioactivity from the body. Research was eliminated, but is still needed on new removal agents, improved delivery system, in vitro test systems, and the toxicology of treatments. For many radionuclides, no adequate therapy exists. The relationship between radionuclide removal and reduction in cancer risk is still unanswered. Without proper research support, needed improvements in the treatment for incorporated radionuclides in the US are uncertain

  20. The System 80+ Standard Plant design control document. Volume 20

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains 2 technical specifications bases as part of Appendix 16 A Tech Spec Bases. They are TS B3.8 Electrical Power Technical Systems Bases and TS B3.9 Refueling Operations Bases. All 3 parts of section 17 (QA) and all 10 parts of section 18 (Human Factors) of the ADM Design and Analysis are contained in this volume. Topics covered in section 17 are: design phase QA; operations phase QA; and design phase reliability assurance. Topics covered by section 18 are: design team organization; design goals; design process; functional task analysis; control room configuration; information presentation; control and monitoring; verification and validation; and review documents

  1. Self-authentication of value documents

    Science.gov (United States)

    Hayosh, Thomas D.

    1998-04-01

    To prevent fraud it is critical to distinguish an authentic document from a counterfeit or altered document. Most current technologies rely on difficult-to-print human detectable features which are added to a document to prevent illegal reproduction. Fraud detection is mostly accomplished by human observation and is based upon the examiner's knowledge, experience and time allotted for examination of a document. Another approach to increasing the security of a value document is to add a unique property to each document. Data about that property is then encoded on the document itself and finally secured using a public key based digital signature. In such a scheme, machine readability of authenticity is possible. This paper describes a patent-applied-for methodology using the unique property of magnetic ink printing, magnetic remanence, that provides for full self- authentication when used with a recordable magnetic stripe for storing a digital signature and other document data. Traditionally the authenticity of a document is determined by physical examination for color, background printing, paper texture, printing resolution, and ink characteristics. On an initial level, there may be numerous security features present on a value document but only a few can be detected and evaluated by the untrained individual. Because security features are normally not standardized except on currency, training tellers and cashiers to do extensive security evaluation is not practical, even though these people are often the only people who get a chance to closely examine the document in a payment system which is back-end automated. In the context of this paper, one should be thinking about value documents such as commercial and personal checks although the concepts presented here can easily be applied to travelers cheques, credit cards, event tickets, passports, driver's licenses, motor vehicle titles, and even currency. For a practical self-authentication system, the false alarms

  2. Use of an advanced document system in post-refuelling updating of nuclear power plant documentation; Utilizacion de un sistema documental avanzado en la actualizacion de documentacion post recarga

    Energy Technology Data Exchange (ETDEWEB)

    Puech Suanzes, P; Cortes Soler, M [Empresarios Agrupados, A.I.E., Madrid (Spain)

    1993-12-15

    This paper discusses the results of the extensive use of an advanced document system to update documentation prepared by traditional methods and affected by changes in the period between two plant refuellings. The implementation of a system for the capture, retrieval and storage of drawings using optical discs is part of a plan to modernize production and management tools and to thus achieve better control of document configuration. These processes are consequently optimized in that: 1. The deterioration of drawings is detained with the help of an identical, updated, legible, reliable support for all users. 2. The time required to update documentation is reduced. Given the large number of drawings, the implementation method should effectively combine costs and time. The document management tools ensure optical disc storage control so that from the moment a drawing resides in the system, any modification to it is made through the system utilities, thus ensuring quality and reducing schedules. The system described was used to update the electrical drawings of Almaraz Nuclear Power Plant. Changes made during the eighth refuelling of Unit I were incorporated and the time needed to issue the updated drawings was reduced by one month. (author)

  3. Converting hard copy documents for electronic dissemination

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, F.

    1994-12-31

    Since the advent of computer systems, the goal of a paperless office, and even a paperless society, has been pursued. While the normal paper flow in an organization is far from totally automated, particularly for items requiring signatures or authorizations, electronic information dissemination is becoming an almost simple task. The reasons for providing on-line documents are many and include faster and easier access for everyone, elimination of printing costs, reduction of wasted shelf and desk space, and the security of having a centrally-located, always up-to-date document. New computer software even provides the user with the ability to annotate documents and to have bookmarks so that the old scribbled-in and dog-eared manual can be replaced without loosing this `customizability`. Moreover, new hypermedia capabilities mean that documents can be read in a non-linear fashion and can include color figures and photographs, audio, and even animation sequences, capabilities which exceed those of paper. The proliferation of network-based information servers, coupled with the growth of the Internet, has enticed academic, governmental, and even commercial organizations to provide increasing numbers of documents and data bases in electronic form via the network, not just to internal staff, but to the public as well. Much of this information, which includes everything from mundane company procedures to spiffy marketing brochures, was previously published only in hard copy. Converting existing documents to electronic form and producing only electronic versions of new documents poses some interesting challenges to the maintainer or author.

  4. LDRD 149045 final report distinguishing documents.

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Scott A.

    2010-09-01

    This LDRD 149045 final report describes work that Sandians Scott A. Mitchell, Randall Laviolette, Shawn Martin, Warren Davis, Cindy Philips and Danny Dunlavy performed in 2010. Prof. Afra Zomorodian provided insight. This was a small late-start LDRD. Several other ongoing efforts were leveraged, including the Networks Grand Challenge LDRD, and the Computational Topology CSRF project, and the some of the leveraged work is described here. We proposed a sentence mining technique that exploited both the distribution and the order of parts-of-speech (POS) in sentences in English language documents. The ultimate goal was to be able to discover 'call-to-action' framing documents hidden within a corpus of mostly expository documents, even if the documents were all on the same topic and used the same vocabulary. Using POS was novel. We also took a novel approach to analyzing POS. We used the hypothesis that English follows a dynamical system and the POS are trajectories from one state to another. We analyzed the sequences of POS using support vector machines and the cycles of POS using computational homology. We discovered that the POS were a very weak signal and did not support our hypothesis well. Our original goal appeared to be unobtainable with our original approach. We turned our attention to study an aspect of a more traditional approach to distinguishing documents. Latent Dirichlet Allocation (LDA) turns documents into bags-of-words then into mixture-model points. A distance function is used to cluster groups of points to discover relatedness between documents. We performed a geometric and algebraic analysis of the most popular distance functions and made some significant and surprising discoveries, described in a separate technical report.

  5. Monitored Geologic Repository Project Description Document

    International Nuclear Information System (INIS)

    Curry, P. M.

    2001-01-01

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6)

  6. Monitored Geologic Repository Project Description Document

    International Nuclear Information System (INIS)

    Curry, P.

    2000-01-01

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (CRWMS M and O 2000b) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) engineering design basis in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The engineering design basis documented in the PDD is to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the engineering design basis from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the engineering design basis captured in the SDDs and the design requirements captured in U.S. Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 2-1, the MGR Architecture (Section 4.1),the Engineering Design Bases (Section 5), and the Controlled Project Assumptions (Section 6)

  7. Incorporating groundwater flow into the WEPP model

    Science.gov (United States)

    William Elliot; Erin Brooks; Tim Link; Sue Miller

    2010-01-01

    The water erosion prediction project (WEPP) model is a physically-based hydrology and erosion model. In recent years, the hydrology prediction within the model has been improved for forest watershed modeling by incorporating shallow lateral flow into watershed runoff prediction. This has greatly improved WEPP's hydrologic performance on small watersheds with...

  8. Incorporating Feminism into Rehabilitation Counselor Education

    Science.gov (United States)

    Jeon, Mookyong

    2015-01-01

    Purpose: The author describes how rehabilitation counselor educators can incorporate the feminist perspective in teaching rehabilitation counselors-in-training by exploring history, core values, and training methods of feminism. Method: Based on a literature review, the author compares philosophy and concepts of rehabilitation counseling and…

  9. Technical Note: Effect of Incorporating Expanded Polystyrene ...

    African Journals Online (AJOL)

    Incorporating expanded polystyrene granules in concrete matrix can produce lightweight polystyrene aggregate concrete of various densities. Workability which is an important property of concrete, aects the rate of placement and the degree of compaction of concrete. Inadequate compaction leads to reduction in both ...

  10. Microbial incorporation of nitrogen in stream detritus

    Science.gov (United States)

    Diane M. Sanzone; Jennifer L. Tank; Judy L. Meyer; Patrick J. Mulholland; Stuart E.G. Findlay

    2001-01-01

    We adapted the chloroform fumigation method to determine microbial nitrogen (N) and microbial incorporation of 15N on three common substrates [leaves, wood and fine benthic organic matter (FBOM)] in three forest streams. We compared microbial N and 15 content of samples collected during a 6-week15N-NH...

  11. Audit incorporating avoidability and appropriate intervention can ...

    African Journals Online (AJOL)

    Audit incorporating avoidability and appropriate intervention can significantly decrease perinatal mortality. H. R. G. Ward, G. R. Howarth, O. J. N. Jennings,. R. C. Pattinson .... 6 months) and seven interns. The study was .... maternity care notes study: a randomized control trial to assess the effects of giving expectant mothers ...

  12. Incorporating Engineering Design Challenges into STEM Courses

    Science.gov (United States)

    Householder, Daniel L., Ed.; Hailey, Christine E., Ed.

    2012-01-01

    Successful strategies for incorporating engineering design challenges into science, technology, engineering, and mathematics (STEM) courses in American high schools are presented in this paper. The developers have taken the position that engineering design experiences should be an important component of the high school education of all American…

  13. Radwaste disposal by incorporation in matrix

    International Nuclear Information System (INIS)

    Curtiss, D.H.; Heacock, H.W.

    1976-01-01

    A process of safe disposal, handling, or storae of radwaste associated with nuclear power productin is described. A feature of the invention is to incorporate the radwaste in a hardenable, matrix-forming mass employing a cement-type binding agent to which alkali or alkaline-earth silicate is added, among other things, to increase liquid absorption. 9 claims

  14. Semiconducting compounds and devices incorporating same

    Science.gov (United States)

    Marks, Tobin J.; Facchetti, Antonio; Boudreault, Pierre-Luc; Miyauchi, Hiroyuki

    2016-01-19

    Disclosed are molecular and polymeric compounds having desirable properties as semiconducting materials. Such compounds can exhibit desirable electronic properties and possess processing advantages including solution-processability and/or good stability. Organic transistor and photovoltaic devices incorporating the present compounds as the active layer exhibit good device performance.

  15. Incorporating biological control into IPM decision making

    Science.gov (United States)

    Of the many ways biological control can be incorporated into Integrated Pest Management (IPM) programs, natural enemy thresholds are arguably most easily adopted by stakeholders. Integration of natural enemy thresholds into IPM programs requires ecological and cost/benefit crop production data, thr...

  16. KRYPTON INCORPORATION IN SPUTTERED SILICON FILMS

    NARCIS (Netherlands)

    GREUTER, MJW; NIESEN, L; HAKVOORT, RA; DEROODE, J; VANVEEN, A; BERNTSEN, AJM; SLOOF, WG

    1993-01-01

    The incorporation of Kr in sputtered a-Si films has been investigated in a systematic way by varying the Kr to Si flux, yielding Kr concentrations up to 5 at %. Compositions were determined with X-ray microanalysis. A model has been applied to describe the composition of the growing film. The layers

  17. Conservation Documentation and the Implications of Digitisation

    Directory of Open Access Journals (Sweden)

    Michelle Moore

    2001-11-01

    Full Text Available Conservation documentation can be defined as the textual and visual records collected during the care and treatment of an object. It can include records of the object's condition, any treatment done to the object, any observations or conclusions made by the conservator as well as details on the object's past and present environment. The form of documentation is not universally agreed upon nor has it always been considered an important aspect of the conservation profession. Good documentation tells the complete story of an object thus far and should provide as much information as possible for the future researcher, curator, or conservator. The conservation profession will benefit from digitising its documentation using software such as databases and hardware like digital cameras and scanners. Digital technology will make conservation documentation more easily accessible, cost/time efficient, and will increase consistency and accuracy of the recorded data, and reduce physical storage space requirements. The major drawback to digitising conservation records is maintaining access to the information for the future; the notorious pace of technological change has serious implications for retrieving data from any machine- readable medium.

  18. A New Binarization Algorithm for Historical Documents

    Directory of Open Access Journals (Sweden)

    Marcos Almeida

    2018-01-01

    Full Text Available Monochromatic documents claim for much less computer bandwidth for network transmission and storage space than their color or even grayscale equivalent. The binarization of historical documents is far more complex than recent ones as paper aging, color, texture, translucidity, stains, back-to-front interference, kind and color of ink used in handwriting, printing process, digitalization process, etc. are some of the factors that affect binarization. This article presents a new binarization algorithm for historical documents. The new global filter proposed is performed in four steps: filtering the image using a bilateral filter, splitting image into the RGB components, decision-making for each RGB channel based on an adaptive binarization method inspired by Otsu’s method with a choice of the threshold level, and classification of the binarized images to decide which of the RGB components best preserved the document information in the foreground. The quantitative and qualitative assessment made with 23 binarization algorithms in three sets of “real world” documents showed very good results.

  19. Optical security features for plastic card documents

    Science.gov (United States)

    Hossick Schott, Joachim

    1998-04-01

    Print-on-demand is currently a major trend in the production of paper based documents. This fully digital production philosophy will likely have ramifications also for the secure identification document market. Here, plastic cards increasingly replace traditionally paper based security sensitive documents such as drivers licenses and passports. The information content of plastic cards can be made highly secure by using chip cards. However, printed and other optical security features will continue to play an important role, both for machine readable and visual inspection. Therefore, on-demand high resolution print technologies, laser engraving, luminescent pigments and laminated features such as holograms, kinegrams or phase gratings will have to be considered for the production of secure identification documents. Very important are also basic optical, surface and material durability properties of the laminates as well as the strength and nature of the adhesion between the layers. This presentation will address some of the specific problems encountered when optical security features such as high resolution printing and laser engraving are to be integrated in the on-demand production of secure plastic card identification documents.

  20. Technical Basis Document (TBD) and user guides

    International Nuclear Information System (INIS)

    Chiaro, P.J. Jr.

    1998-09-01

    A Technical Basis Document (TBD) should provide the background information for establishment of an instrument's operational requirements. Due to the amount and location of DOE facilities, no one set of requirements is possible. Operational requirements will vary based on the local environments and missions at each facility. Environmental conditions that can affect an instrument's operations are ambient temperature, humidity, and radio frequency, and to a lesser extent, magnetic fields, and interfering ionizing radiations. Consideration should also be made regarding how an instrument is to be used. If an instrument will be transported around the facility, vibration and shock can cause problems if they are not addressed in the TBD. This document provides guidance for the development of a TBD. This document applies to radiation instruments used for personnel and equipment contamination monitoring, dose rate monitoring, and air monitoring

  1. Fiscal year 1999 waste information requirements document

    International Nuclear Information System (INIS)

    Adams, M.R.

    1998-01-01

    The Waste Information Requirements Document (WIRD) has the following purposes: To describe the overall drivers that require characterization information and to document their source; To define how characterization is going to satisfy the drivers, close issues, and measure and report progress; and To describe deliverables and acceptance criteria for characterization. Characterization information is required to maintain regulatory compliance, perform operations and maintenance, resolve safety issues, and prepare for disposal of waste. Commitments addressing these requirements are derived from the Hanford Federal Facility Agreement and Consent Order, also known as the Tri-Party Agreement; the Recommendation 93-5 Implementation Plan (DOE-RL 1996a) to the Defense Nuclear Facilities Safety Board (DNFSB); and other requirement sources listed in Section 2.0. The Waste Information Requirements Document replaces the tank waste analysis plans and the tank characterization plan previously required by the Tri-Party Agreement, Milestone M-44-01 and M-44-02 series

  2. PSA applications. Good practices and documentation

    International Nuclear Information System (INIS)

    Dewailly, J.; Magne, L.

    1997-10-01

    In this paper, it is shown what the condensed documentation of the main strategic choices and technical assumptions related to a PSA could contain: how to select the internal and external initiating events, how the detail the plant configuration and the general organization of the plant and operating staff, how to highlight the assumptions related to physical models, etc. The proposals in this documentation are based on the R and D D's experience with PSA (construction of PSA models, use of PSA models for operation or maintenance, PSA tools). This document also presents different types of rules or recommendations related to PSA modelling for various applications involved in nuclear power plant operating. Finally, the paper stresses the main difficulties encountered (appropriate use of uncertainties, communication of PSA results to non-specialist users) and it also outlines some prospects for the future. (author)

  3. Waste Acceptance System Requirements document (WASRD)

    International Nuclear Information System (INIS)

    1993-01-01

    This Waste Acceptance System Requirements document (WA-SRD) describes the functions to be performed and the technical requirements for a Waste Acceptance System for accepting spent nuclear fuel (SNF) and high-level radioactive waste (HLW) into the Civilian Radioactive Waste Management System (CRWMS). This revision of the WA-SRD addresses the requirements for the acceptance of HLW. This revision has been developed as a top priority document to permit DOE's Office of Environmental Restoration and Waste Management (EM) to commence waste qualification runs at the Savannah River Site's (SRS) Defense Waste Processing Facility (DWPF) in a timely manner. Additionally, this revision of the WA-SRD includes the requirements from the Physical System Requirements -- Accept Waste document for the acceptance of SNF. A subsequent revision will fully address requirements relative to the acceptance of SNF

  4. Organising Documentation in Knowledge Evolution and Communication

    Directory of Open Access Journals (Sweden)

    Cristina De Castro

    2007-06-01

    Full Text Available The knowledge of a subject evolves in time due to many factors, such as better understanding, study of additional issues within the same subject, study of related work from other themes, etc. This can be achieved by individual work, direct cooperation with other people and, in general, knowledge sharing. In this context, and in the broader context of knowledge communication, the appropriate organisation of documentation plays a fundamental role, but is often very difficult to achieve. A layered architecture is here proposed for the development of a structured repository of documentation, here called knowledge-bibliography KB. The process of knowledge acquisition, evolution and communication is firstly considered, then the distributed nature of nowadays knowledge and the ways it is shared and transferred are taken into account. On the basis of the above considerations, a possible clustering of documentation collected by many people is defined. An LDAP-based architecture for the implementation of this structure is also discussed.

  5. Technical basis document for natural event hazards

    International Nuclear Information System (INIS)

    CARSON, D.M.

    2003-01-01

    This technical basis document was developed to support the Tank Farms Documented Safety Analysis (DSA), and describes the risk binning process and the technical basis for assigning risk bins for natural event hazards (NEH)-initiated representative accident and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, ''Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses'', as described in this report

  6. Cultural diversity: blind spot in medical curriculum documents, a document analysis.

    Science.gov (United States)

    Paternotte, Emma; Fokkema, Joanne P I; van Loon, Karsten A; van Dulmen, Sandra; Scheele, Fedde

    2014-08-22

    Cultural diversity among patients presents specific challenges to physicians. Therefore, cultural diversity training is needed in medical education. In cases where strategic curriculum documents form the basis of medical training it is expected that the topic of cultural diversity is included in these documents, especially if these have been recently updated. The aim of this study was to assess the current formal status of cultural diversity training in the Netherlands, which is a multi-ethnic country with recently updated medical curriculum documents. In February and March 2013, a document analysis was performed of strategic curriculum documents for undergraduate and postgraduate medical education in the Netherlands. All text phrases that referred to cultural diversity were extracted from these documents. Subsequently, these phrases were sorted into objectives, training methods or evaluation tools to assess how they contributed to adequate curriculum design. Of a total of 52 documents, 33 documents contained phrases with information about cultural diversity training. Cultural diversity aspects were more prominently described in the curriculum documents for undergraduate education than in those for postgraduate education. The most specific information about cultural diversity was found in the blueprint for undergraduate medical education. In the postgraduate curriculum documents, attention to cultural diversity differed among specialties and was mainly superficial. Cultural diversity is an underrepresented topic in the Dutch documents that form the basis for actual medical training, although the documents have been updated recently. Attention to the topic is thus unwarranted. This situation does not fit the demand of a multi-ethnic society for doctors with cultural diversity competences. Multi-ethnic countries should be critical on the content of the bases for their medical educational curricula.

  7. The investigation of crimes refering to forgery of documents and possession of forged documents

    OpenAIRE

    Kotovienė, Danutė

    2011-01-01

    THE INVESTIGATION OF CRIMES REFERING TO FORGERY OF DOCUMENTS AND POSSESSION OF FORGED DOCUMENTS Constantly improving informational technologies more and more get into our daily routine: nowadays it is widely spread internet payments, purchases, signing on-line agreements using electronic signatures. However, paper documents or other made of appropriate materials, which have material evidence, still have a very significant impact on our life. Its convey different aspects of states’ public work...

  8. Person-centred care in nursing documentation.

    LENUS (Irish Health Repository)

    Broderick, Margaret C

    2012-12-07

    BACKGROUND: Documentation is an essential part of nursing. It provides evidence that care has been carried out and contains important information to enhance the quality and continuity of care. Person-centred care (PCC) is an approach to care that is underpinned by mutual respect and the development of a therapeutic relationship between the patient and nurse. It is a core principle in standards for residential care settings for older people and is beneficial for both patients and staff (International Practice Development in Nursing and Healthcare, Chichester, Blackwell, 2008 and The Implementation of a Model of Person-Centred Practice in Older Person Settings, Dublin, Health Service Executive, 2010a). However, the literature suggests a lack of person-centredness within nursing documentation (International Journal of Older People Nursing 2, 2007, 263 and The Implementation of a Model of Person-Centred Practice in Older Person Settings, Dublin, Health Service Executive, 2010a). AIMS AND OBJECTIVES: To explore nursing documentation in long-term care, to determine whether it reflected a person-centred approach to care and to describe aspects of PCC as they appeared in nursing records. METHOD: A qualitative descriptive study using the PCN framework (Person-centred Nursing; Theory and Practice, Oxford, Wiley-Blackwell, 2010) as the context through which nursing assessments and care plans were explored. RESULTS: Findings indicated that many nursing records were incomplete, and information regarding psychosocial aspects of care was infrequent. There was evidence that nurses engaged with residents and worked with their beliefs and values. However, nursing documentation was not completed in consultation with the patient, and there was little to suggest that patients were involved in decisions relating to their care. IMPLICATIONS FOR PRACTICE: The structure of nursing documentation can be a major obstacle to the recording of PCC and appropriate care planning. Documentation

  9. Performance evaluation recommendations of nuclear power plants outdoor significant civil structures earthquake resistance. Technical documentation

    International Nuclear Information System (INIS)

    2005-06-01

    The Japan Society of Civil Engineers has updated performance evaluation recommendations of nuclear power plants outdoor significant civil structures earthquake resistance in June 2005. Experimental and analytical considerations on the seismic effects evaluation criteria, such as analytical seismic models of soils for underground structures, effects of vertical motions on time-history dynamic analysis and shear fracture of reinforced concretes by cyclic loadings, were shown in this document and incorporated in new recommendations. (T. Tanaka)

  10. Aiding the Interpretation of Ancient Documents

    DEFF Research Database (Denmark)

    Roued-Cunliffe, Henriette

    How can Decision Support System (DSS) software aid the interpretation process involved in the reading of ancient documents? This paper discusses the development of a DSS prototype for the reading of ancient texts. In this context the term ‘ancient documents’ is used to describe mainly Greek...... tool it is important first to comprehend the interpretation process involved in reading ancient documents. This is not a linear process but rather a recursive process where the scholar moves between different levels of reading, such as ‘understanding the meaning of a character’ or ‘understanding...

  11. 200 Area TEDF interface control document

    Energy Technology Data Exchange (ETDEWEB)

    Brown, M.J.; Hildebrand, R.A.

    1994-11-15

    Because the TEDF does not have any treatment or retention capacity, strict control at the generator interface is essential to operate the TEDF in compliance with good engineering practices, Hanford site requirements, and the 216 Discharge Permit. The information in the Interface Control Document (ICD) forms the basis of understanding between all parties involved in the TEDF; DOE, WHC, and the generating facilities. The ICD defines the controlling document hierarchy; LEF, and generator responsibilities; monitoring and sampling requirements; and specifies the TEDF/Generator Interface points.

  12. Disaster recovery: mitigating loss through documentation.

    Science.gov (United States)

    Boisvert, Sue

    2011-01-01

    Flood, fire, tornado, hurricane. Whatever the cause, natural or man-made, the result on an organization can be devastating. Planning and preparation for disaster must include significant attention to disaster recovery. The ability to produce documentation of what existed, what was damaged, recovery costs and income losses will be essential to the claims adjustment process. This article discusses strategies for creating a historical record, leveraging contemporaneous incident command documentation and working with contractors to identify and record disaster-related expenses. © 2011 American Society for Healthcare Risk Management of the American Hospital Association.

  13. The Digital Administrative Document: an approximate path

    Directory of Open Access Journals (Sweden)

    Francesca Delneri

    2017-09-01

    Full Text Available If the road towards a progressive dematerialization of the administrative document is marked, the legislator is not always proceeding in a coherent, clear or complete way. The line of reasoning needs to be focused on the administration of documental heritage, training and preservation rather than on technological issues, involving actively local administration and taking on responsibilities on decisions, also on the relationship between costs and benefits. The way is hard due to the lack of debate and practical directions, where the preservation should not be considered as a commanding confirmation, but as an occasion to face complex and critical issues.

  14. WCATS: Waste Documentation, Course No. 8504

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, Sandy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-04-14

    This course was developed for individuals at Los Alamos National Laboratory (LANL) who characterize and document waste streams in the Waste Compliance and Tracking System (WCATS) according to Environmental Protection Agency (EPA) Department of Transportation (DOT) regulations, Department of Energy Orders, and other applicable criteria. When you have completed this course, you will be able to recognize how waste documentation enables LANL to characterize and classify hazardous waste for compliant treatment, storage, and disposal, identify the purpose of the waste stream profile (WSP), identify the agencies that provide guidance for waste management, and more.

  15. Life Support Baseline Values and Assumptions Document

    Science.gov (United States)

    Anderson, Molly S.; Ewert, Michael K.; Keener, John F.

    2018-01-01

    The Baseline Values and Assumptions Document (BVAD) provides analysts, modelers, and other life support researchers with a common set of values and assumptions which can be used as a baseline in their studies. This baseline, in turn, provides a common point of origin from which many studies in the community may depart, making research results easier to compare and providing researchers with reasonable values to assume for areas outside their experience. This document identifies many specific physical quantities that define life support systems, serving as a general reference for spacecraft life support system technology developers.

  16. PUREX Deactivation Health and Safety documentation

    International Nuclear Information System (INIS)

    Dodd, E.N. III.

    1995-01-01

    The purpose of the PUREX Deactivation Project is to establish a passively safe and environmentally secure configuration of PUREX at the Hanford Site, and to preserve that configuration for a 10-year horizon. The 10-year horizon is used to predict future maintenance requirements and represents they typical time duration expended to define, authorize, and initiate the follow-on Decontamination and Decommissioning (D ampersand D) activities. This document was prepared to increase attention to worker safety issues during the deactivation project and, as such, identifies the documentation and programs associated with PUREX Deactivation Health and Safety

  17. Title list of documents made publicly available

    International Nuclear Information System (INIS)

    1994-06-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index

  18. Supplemental design requirements document, Project W026

    International Nuclear Information System (INIS)

    Weidert, J.R.

    1993-01-01

    This document supplements and extends the Functional Design Criteria, SP-W026-FDC-001, for the Waste Receiving and Processing Facility (WRAP), Module 1. It provides additional detailed requirements, summarizes key Westinghouse Hanford Company design guidance, and establishes baseline technical agreements to be used in definitive design of the WRAP-1 facility. Revision 3 of the Supplemental Design Requirements Document has been assigned an Impact Level of 3ESQ based on the content of the entire revision. The actual changes made from Revision 2 have an Impact Level of 3S and the basis for these changes was previously reviewed and approved per WHC correspondence No. 9355770

  19. Forensic 3D documentation of skin injuries

    DEFF Research Database (Denmark)

    Villa, Chiara

    2017-01-01

    An accurate and precise documentation of injuries is fundamental in a forensic pathological context. Photographs and manual measurements are taken of all injuries during autopsies, but ordinary photography projects a 3D wound on a 2D space. Using technologies such as photogrammetry, it is possible...... methods (p > 0.05). The results of intra- and inter-observer tests indicated perfect agreement between the observers with mean value differences of ≤ 0.02 cm. This study demonstrated the validity of using photogrammetry for documentation of injuries in a forensic pathological context. Importantly...

  20. Title list of documents made publicly available

    International Nuclear Information System (INIS)

    1982-03-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index

  1. Title list of documents made publicly available

    International Nuclear Information System (INIS)

    1991-01-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes docketed material associated with civilian nuclear power plants and other uses of radioactive materials and nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued though the Department of Energy publication Power Reactor Docket Information, last published in January 1979

  2. PUREX Deactivation Health and Safety documentation

    Energy Technology Data Exchange (ETDEWEB)

    Dodd, E.N. III

    1995-01-01

    The purpose of the PUREX Deactivation Project is to establish a passively safe and environmentally secure configuration of PUREX at the Hanford Site, and to preserve that configuration for a 10-year horizon. The 10-year horizon is used to predict future maintenance requirements and represents they typical time duration expended to define, authorize, and initiate the follow-on Decontamination and Decommissioning (D&D) activities. This document was prepared to increase attention to worker safety issues during the deactivation project and, as such, identifies the documentation and programs associated with PUREX Deactivation Health and Safety.

  3. Environmental restoration value engineering guidance document

    International Nuclear Information System (INIS)

    1995-07-01

    This document provides guidance on Value Engineering (VE). VE is an organized team effort led by a person trained in the methodology to analyze the functions of projects, systems, equipment, facilities, services, and processes for achieving the essential functions at the lowest life cycle cost while maintaining required performance, reliability, availability, quality, and safety. VE has proven to be a superior tool to improve up-front project planning, cut costs, and create a better value for each dollar spent. This document forms the basis for the Environmental Restoration VE Program, describes the VE process, and provides recommendations on when it can be most useful on ER projects

  4. 200 Area TEDF interface control document

    International Nuclear Information System (INIS)

    Brown, M.J.; Hildebrand, R.A.

    1994-01-01

    Because the TEDF does not have any treatment or retention capacity, strict control at the generator interface is essential to operate the TEDF in compliance with good engineering practices, Hanford site requirements, and the 216 Discharge Permit. The information in the Interface Control Document (ICD) forms the basis of understanding between all parties involved in the TEDF; DOE, WHC, and the generating facilities. The ICD defines the controlling document hierarchy; LEF, and generator responsibilities; monitoring and sampling requirements; and specifies the TEDF/Generator Interface points

  5. Technical document characterization by data analysis

    International Nuclear Information System (INIS)

    Mauget, A.

    1993-05-01

    Nuclear power plants possess documents analyzing all the plant systems, which represents a vast quantity of paper. Analysis of textual data can enable a document to be classified by grouping the texts containing the same words. These methods are used on system manuals for feasibility studies. The system manual is then analyzed by LEXTER and the terms it has selected are examined. We first classify according to style (sentences containing general words, technical sentences, etc.), and then according to terms. However, it will not be possible to continue in this fashion for the 100 system manuals existing, because of lack of sufficient storage capacity. Another solution is being developed. (author)

  6. Stamp Detection in Color Document Images

    DEFF Research Database (Denmark)

    Micenkova, Barbora; van Beusekom, Joost

    2011-01-01

    , moreover, it can be imprinted with a variable quality and rotation. Previous methods were restricted to detection of stamps of particular shapes or colors. The method presented in the paper includes segmentation of the image by color clustering and subsequent classification of candidate solutions...... by geometrical and color-related features. The approach allows for differentiation of stamps from other color objects in the document such as logos or texts. For the purpose of evaluation, a data set of 400 document images has been collected, annotated and made public. With the proposed method, recall of 83...

  7. Title List of documents made publicly available

    International Nuclear Information System (INIS)

    1982-05-01

    This document contains descriptions of the information received and generated by the US NRC. This information includes: (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index

  8. Tank Monitoring and Document control System (TMACS) As Built Software Design Document

    Energy Technology Data Exchange (ETDEWEB)

    GLASSCOCK, J.A.

    2000-01-27

    This document describes the software design for the Tank Monitor and Control System (TMACS). This document captures the existing as-built design of TMACS as of November 1999. It will be used as a reference document to the system maintainers who will be maintaining and modifying the TMACS functions as necessary. The heart of the TMACS system is the ''point-processing'' functionality where a sample value is received from the field sensors and the value is analyzed, logged, or alarmed as required. This Software Design Document focuses on the point-processing functions.

  9. Tank Monitoring and Document control System (TMACS) As Built Software Design Document

    International Nuclear Information System (INIS)

    GLASSCOCK, J.A.

    2000-01-01

    This document describes the software design for the Tank Monitor and Control System (TMACS). This document captures the existing as-built design of TMACS as of November 1999. It will be used as a reference document to the system maintainers who will be maintaining and modifying the TMACS functions as necessary. The heart of the TMACS system is the ''point-processing'' functionality where a sample value is received from the field sensors and the value is analyzed, logged, or alarmed as required. This Software Design Document focuses on the point-processing functions

  10. 78 FR 10181 - Documents To Support Submission of an Electronic Common Technical Document; Availability

    Science.gov (United States)

    2013-02-13

    .... regional document type definition, version 3.1), and ``Comprehensive Table of Contents Headings and... characterization of promotional marketing and advertising material, and facilitate automated processing of...

  11. Incorporation of the capillary hysteresis model HYSTR into the numerical code TOUGH

    International Nuclear Information System (INIS)

    Niemi, A.; Bodvarsson, G.S.; Pruess, K.

    1991-11-01

    As part of the work performed to model flow in the unsaturated zone at Yucca Mountain Nevada, a capillary hysteresis model has been developed. The computer program HYSTR has been developed to compute the hysteretic capillary pressure -- liquid saturation relationship through interpolation of tabulated data. The code can be easily incorporated into any numerical unsaturated flow simulator. A complete description of HYSTR, including a brief summary of the previous hysteresis literature, detailed description of the program, and instructions for its incorporation into a numerical simulator are given in the HYSTR user's manual (Niemi and Bodvarsson, 1991a). This report describes the incorporation of HYSTR into the numerical code TOUGH (Transport of Unsaturated Groundwater and Heat; Pruess, 1986). The changes made and procedures for the use of TOUGH for hysteresis modeling are documented

  12. Staphylococcus aureus Sortase A-Mediated Incorporation of Peptides: Effect of Peptide Modification on Incorporation.

    Directory of Open Access Journals (Sweden)

    Silvie Hansenová Maňásková

    Full Text Available The endogenous Staphylococcus aureus sortase A (SrtA transpeptidase covalently anchors cell wall-anchored (CWA proteins equipped with a specific recognition motif (LPXTG into the peptidoglycan layer of the staphylococcal cell wall. Previous in situ experiments have shown that SrtA is also able to incorporate exogenous, fluorescently labelled, synthetic substrates equipped with the LPXTG motif (K(FITCLPETG-amide into the bacterial cell wall, albeit at high concentrations of 500 μM to 1 mM. In the present study, we have evaluated the effect of substrate modification on the incorporation efficiency. This revealed that (i by elongation of LPETG-amide with a sequence of positively charged amino acids, derived from the C-terminal domain of physiological SrtA substrates, the incorporation efficiency was increased by 20-fold at 10 μM, 100 μM and 250 μM; (ii Substituting aspartic acid (E for methionine increased the incorporation of the resulting K(FITCLPMTG-amide approximately three times at all concentrations tested; (iii conjugation of the lipid II binding antibiotic vancomycin to K(FITCLPMTG-amide resulted in the same incorporation levels as K(FITCLPETG-amide, but much more efficient at an impressive 500-fold lower substrate concentration. These newly developed synthetic substrates can potentially find broad applications in for example the in situ imaging of bacteria; the incorporation of antibody recruiting moieties; the targeted delivery and covalent incorporation of antimicrobial compounds into the bacterial cell wall.

  13. Standardized End Point Definitions for Coronary Intervention Trials: The Academic Research Consortium-2 Consensus Document.

    Science.gov (United States)

    Garcia-Garcia, Hector M; McFadden, Eugène P; Farb, Andrew; Mehran, Roxana; Stone, Gregg W; Spertus, John; Onuma, Yoshinobu; Morel, Marie-Angèle; van Es, Gerrit-Anne; Zuckerman, Bram; Fearon, William F; Taggart, David; Kappetein, Arie-Pieter; Krucoff, Mitchell W; Vranckx, Pascal; Windecker, Stephan; Cutlip, Donald; Serruys, Patrick W

    2018-06-14

    The Academic Research Consortium (ARC)-2 initiative revisited the clinical and angiographic end point definitions in coronary device trials, proposed in 2007, to make them more suitable for use in clinical trials that include increasingly complex lesion and patient populations and incorporate novel devices such as bioresorbable vascular scaffolds. In addition, recommendations for the incorporation of patient-related outcomes in clinical trials are proposed. Academic Research Consortium-2 is a collaborative effort between academic research organizations in the United States and Europe, device manufacturers, and European, US, and Asian regulatory bodies. Several in-person meetings were held to discuss the changes that have occurred in the device landscape and in clinical trials and regulatory pathways in the last decade. The consensus-based end point definitions in this document are endorsed by the stakeholders of this document and strongly advocated for clinical trial purposes. This Academic Research Consortium-2 document provides further standardization of end point definitions for coronary device trials, incorporating advances in technology and knowledge. Their use will aid interpretation of trial outcomes and comparison among studies, thus facilitating the evaluation of the safety and effectiveness of these devices.

  14. [Incorporation monitoring of employees of a radioiodine therapy ward. Is incorporation monitoring required for routine?].

    Science.gov (United States)

    Happel, C; Kratzel, U; Selkinski, I; Bockisch, B; Etzel, M; Korkusuz, H; Sauter, B; Staudt, J; von Müller, F; Grünwald, F; Kranert, W T

    2013-01-01

    Aim of the study was to determine the annual incorporation of staff on a radioiodine therapy ward and the resulting annual effective dose (aed). Following the German incorporation guideline (gig), incorporation monitoring is not necessary for potential aed below 0.5 mSv/a. For aed > 0.5 mSv/a adherence to the 1 mSv dose limit must be verified. For doses > 1 mSv/a incorporation has to be monitored by the authority. Furthermore, the (131)I incorporation factor from the gig should be verified. To determine the actual work related incorporation, the (131)I activity concentration in urine samples (collection over 24 h) of 14 employees of different professions were examined over a period of 27 months. Measured activity concentrations were related to the individual time of exposure. A constant activity supply for at least three days was assumed. The mean annual effective doses were 2.4 · 10⁻¹ mSv/a (nursing staff; n = 3), 5.6 · 10⁻² mSv/a (cleaning staff; n = 2), 2.8 · 10⁻³ mSv/a (technical staff; n = 2) and 5.2 · 10⁻³ mSv/a (physicians; n = 7). All aed were below the dose limits of the gig. The calculated mean incorporation factors ranged from 3.0 · 10⁻⁸ for the nursing staff to 3.6 · 10⁻¹⁰ for the technical staff (cleaning staff: 7 · 10⁻⁹; physicians: 6.5 · 10⁻¹⁰) and were therefore well below the (131)I incorporation factor defined by the gig. To estimate the aed caused by incorporation of (131)I it has to be subdivided for the different requirements in the diverse fields of activity of the employees. Regarding those who spend most of their time nearby the patient an incorporation monitoring by the authority might be required. The (131)I incorporation factor from the guideline (10⁻⁶) can be reduced by a factor of 10. For (99m)Tc and (18)F an incorporation factor of 10⁻⁷ is accepted.

  15. Changing Landscapes in Documentation Efforts: Civil Society Documentation of Serious Human Rights Violations

    Directory of Open Access Journals (Sweden)

    Brianne McGonigle Leyh

    2017-04-01

    Full Text Available Wittingly or unwittingly, civil society actors have long been faced with the task of documenting serious human rights violations. Thirty years ago, such efforts were largely organised by grassroots movements, often with little support or funding from international actors. Sharing information and best practices was difficult. Today that situation has significantly changed. The purpose of this article is to explore the changing landscape of civil society documentation of serious human rights violations, and what that means for standardising and professionalising documentation efforts. Using the recent Hisséne Habré case as an example, this article begins by looking at how civil society documentation can successfully influence an accountability process. Next, the article touches upon barriers that continue to impede greater documentation efforts. The article examines the changing landscape of documentation, focusing on technological changes and the rise of citizen journalism and unofficial investigations, using Syria as an example, as well as on the increasing support for documentation efforts both in Syria and worldwide. The changing landscape has resulted in the proliferation of international documentation initiatives aimed at providing local civil society actors guidelines and practical assistance on how to recognise, collect, manage, store and use information about serious human rights violations, as well as on how to minimise the risks associated with the documentation of human rights violations. The recent initiatives undertaken by international civil society, including those by the Public International Law & Policy Group, play an important role in helping to standardise and professionalise documentation work and promote the foundational principles of documentation, namely the ‘do no harm’ principle, and the principles of informed consent and confidentiality. Recognising the drawback that greater professionalisation may bring, it

  16. Emissive sensors and devices incorporating these sensors

    Science.gov (United States)

    Swager, Timothy M; Zhang, Shi-Wei

    2013-02-05

    The present invention generally relates to luminescent and/or optically absorbing compositions and/or precursors to those compositions, including solid films incorporating these compositions/precursors, exhibiting increased luminescent lifetimes, quantum yields, enhanced stabilities and/or amplified emissions. The present invention also relates to sensors and methods for sensing analytes through luminescent and/or optically absorbing properties of these compositions and/or precursors. Examples of analytes detectable by the invention include electrophiles, alkylating agents, thionyl halides, and phosphate ester groups including phosphoryl halides, cyanides and thioates such as those found in certain chemical warfare agents. The present invention additionally relates to devices and methods for amplifying emissions, such as those produced using the above-described compositions and/or precursors, by incorporating the composition and/or precursor within a polymer having an energy migration pathway. In some cases, the compositions and/or precursors thereof include a compound capable of undergoing a cyclization reaction.

  17. A Framework Incorporating Community Preferences in Use ...

    Science.gov (United States)

    The report is intended to assist water quality officials, watershed managers, members of stakeholder groups, and other interested individuals in fully evaluating ecological and socioeconomic objectives and the gains and losses that often are involved in use attainment decisions. In addition, this report enables local, state, and tribal managers to better understand the benefits, as well as the costs, of attaining high water quality, and to incorporate community preferences in decision-making. Specific objectives are (1) to provide an introduction to the CWA and WQS regulation and analyses related to setting or changing designated uses; (2) create a basis for understanding the relationship between use-attainment decisions and the effects on ecosystems, ecosystem services, and ecological benefits; (3) serve as reference for methods that elicit or infer preferences for benefits and costs related to attaining uses and (4) present process for incorporating new approaches in water quality decisions.

  18. Active Microwave Metamaterials Incorporating Ideal Gain Devices

    Directory of Open Access Journals (Sweden)

    Hao Xin

    2010-12-01

    Full Text Available Incorporation of active devices/media such as transistors for microwave and gain media for optics may be very attractive for enabling desired low loss and broadband metamaterials. Such metamaterials can even have gain which may very well lead to new and exciting physical phenomena. We investigate microwave composite right/left-handed transmission lines (CRLH-TL incorporating ideal gain devices such as constant negative resistance. With realistic lumped element values, we have shown that the negative phase constant of this kind of transmission lines is maintained (i.e., left-handedness kept while gain can be obtained (negative attenuation constant of transmission line simultaneously. Possible implementation and challenging issues of the proposed active CRLH-TL are also discussed.

  19. Fluorine incorporation during Si solid phase epitaxy

    International Nuclear Information System (INIS)

    Impellizzeri, G.; Mirabella, S.; Romano, L.; Napolitani, E.; Carnera, A.; Grimaldi, M.G.; Priolo, F.

    2006-01-01

    We have investigated the F incorporation and segregation in preamorphized Si during solid phase epitaxy (SPE) at different temperatures and for several implanted-F energies and fluences. The Si samples were amorphized to a depth of 550 nm by implanting Si at liquid nitrogen temperature and then enriched with F at different energies (65-150 keV) and fluences (0.07-5 x 10 14 F/cm 2 ). Subsequently, the samples were regrown by SPE at different temperatures: 580, 700 and 800 deg. C. We have found that the amount of F incorporated after SPE strongly depends on the SPE temperature and on the energy and fluence of the implanted-F, opening the possibility to tailor the F profile during SPE

  20. 21 CFR 601.29 - Guidance documents.

    Science.gov (United States)

    2010-04-01

    ... Manufacturers Assistance (HFM-40), Center for Biologics Evaluation and Research, Food and Drug Administration... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Guidance documents. 601.29 Section 601.29 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) BIOLOGICS...

  1. 21 CFR 312.145 - Guidance documents.

    Science.gov (United States)

    2010-04-01

    ... of Drug Information, Center for Drug Evaluation and Research, Food and Drug Administration, 10903 New... Evaluation and Research, Food and Drug Administration, 1401 Rockville Pike, Rockville, MD 20852-1448. [65 FR... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Guidance documents. 312.145 Section 312.145 Food...

  2. Imaging and visual documentation in medicine

    International Nuclear Information System (INIS)

    Wamsteker, K.; Jonas, U.; Veen, G. van der; Waes, P.F.G.M. van

    1987-01-01

    DOCUMED EUROPE '87 was organized to provide information to the physician on the constantly progressing developments in medical imaging technology. Leading specialists lectured on the state-of-the-art of imaging technology and visual documentation in medicine. This book presents a collection of the papers presented at the conference. refs.; figs.; tabs

  3. SRS Geology/Hydrogeology Environmental Information Document

    Energy Technology Data Exchange (ETDEWEB)

    Denham, M.E.

    1999-08-31

    The purpose of the Savannah River Site Geology and Hydrogeology Environmental Information Document (EID) is to provide geologic and hydrogeologic information to serve as a baseline to evaluate potential environmental impacts. This EID is based on a summary of knowledge accumulated from research conducted at the Savannah River Site (SRS) and surrounding areas.

  4. ISS Crew Transportation and Services Requirements Document

    Science.gov (United States)

    Bayt, Robert L. (Compiler); Lueders, Kathryn L. (Compiler)

    2016-01-01

    The ISS Crew Transportation and Services Requirements Document (CCT-REQ-1130) contains all technical, safety, and crew health medical requirements that are mandatory for achieving a Crew Transportation System Certification that will allow for International Space Station delivery and return of NASA crew and limited cargo. Previously approved on TN23183.

  5. COG Software Architecture Design Description Document

    International Nuclear Information System (INIS)

    Buck, R.M.; Lent, E.M.

    2009-01-01

    This COG Software Architecture Design Description Document describes the organization and functionality of the COG Multiparticle Monte Carlo Transport Code for radiation shielding and criticality calculations, at a level of detail suitable for guiding a new code developer in the maintenance and enhancement of COG. The intended audience also includes managers and scientists and engineers who wish to have a general knowledge of how the code works. This Document is not intended for end-users. This document covers the software implemented in the standard COG Version 10, as released through RSICC and IAEA. Software resources provided by other institutions will not be covered. This document presents the routines grouped by modules and in the order of the three processing phases. Some routines are used in multiple phases. The routine description is presented once - the first time the routine is referenced. Since this is presented at the level of detail for guiding a new code developer, only the routines invoked by another routine that are significant for the processing phase that is being detailed are presented. An index to all routines detailed is included. Tables for the primary data structures are also presented.

  6. Builders Challenge Quality Criteria Support Document

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-06-01

    This document provides guidance to U.S. home builders participating in Builders Challenge. To qualify for the Builders Challenge, a home must score 70 or less on the EnergySmart Home Scale (E-Scale). Homes also must meet the Builders Challenge Quality Cri

  7. Process of technical document quality assessment | Djebabra ...

    African Journals Online (AJOL)

    The most used instrument in training and scientific research is obviously the book which occupies since always a place of choice. Indeed, the book and more particularly the technical book are is used as a support, as well in the basic training as in the document is of good quality in order to have confidence in the services ...

  8. 44 CFR 71.4 - Documentation.

    Science.gov (United States)

    2010-10-01

    ..., 1983; and (3) A community issued final certificate of occupancy or other use permit or equivalent proof... other use permit or equivalent proof certifying that the building was completed (walled and roofed) by... been met, the documentation shall consist of a written statement from the governmental body or...

  9. 27 CFR 19.916 - Organizational documents.

    Science.gov (United States)

    2010-04-01

    ... applicable, copies of— (a) Corporate documents. (1) Corporate charter or certificate of corporate existence... meet the above standards are considered to be the persons interested in the business of the subsidiary... partnership where required by State law) shall be made available to any appropriate TTB officer upon request...

  10. 49 CFR 1104.2 - Document specifications.

    Science.gov (United States)

    2010-10-01

    ... OF TRANSPORTATION RULES OF PRACTICE FILING WITH THE BOARD-COPIES-VERIFICATION-SERVICE-PLEADINGS... continuously, including cover letters and attachments. Where, as a result of assembly processes, such... spreadsheets are not susceptible to scanning, but oversized documents, such as oversized maps and blueprints...

  11. Cuneiform Documents from Various Dutch Collections

    NARCIS (Netherlands)

    Boer, de R.; Dercksen, J.G.; Krispijn, Th.J.H.; J.G., Dercksen e.a.

    2013-01-01

    Publication of Sumerian and Akkadian cuneiform texts in private collections from various periods: * Presargonic: letter-unknown provenance in Northern Babylonia * Ur III: administrative document-Umma) * Old Assyrian: letters-Kaneš (Anatolia) * Old Babylonian: lexical series Ugumu-unknown

  12. International Standardization of Library and Documentation Techniques.

    Science.gov (United States)

    International Federation for Documentation, The Hague (Netherlands).

    This comparative study of the national and international standards, rules and regulations on library and documentation techniques adopted in various countries was conducted as a preliminary step in determining the minimal bases for facilitating national and international cooperation between documentalists and librarians. The study compares and…

  13. 27 CFR 24.110 - Organizational documents.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Organizational documents..., DEPARTMENT OF THE TREASURY LIQUORS WINE Establishment and Operations Application § 24.110 Organizational... under control number 1512-0058) [T.D. ATF-299, 55 FR 24989, June 19, 1990, as amended by T.D. ATF-409...

  14. Applying Hypertext Structures to Software Documentation.

    Science.gov (United States)

    French, James C.; And Others

    1997-01-01

    Describes a prototype system for software documentation management called SLEUTH (Software Literacy Enhancing Usefulness to Humans) being developed at the University of Virginia. Highlights include information retrieval techniques, hypertext links that are installed automatically, a WAIS (Wide Area Information Server) search engine, user…

  15. 7 CFR 1753.49 - Closeout documents.

    Science.gov (United States)

    2010-01-01

    ... Construction Change Orders 1 1 224 Waiver and Release of Lien (from each supplier) 1 1 231 Certificate of... by inspection company or supplier) 1 None Final Key Map (when applicable) 1 1 None Final Central... the engineer that the project and all required documentation are satisfactory and complete...

  16. Concern about Lost Talent: Support Document

    Science.gov (United States)

    Sikora, Joanna; Saha, Lawrence J.

    2011-01-01

    This document was produced by the authors based on their research for the report "Lost talent? The occupational ambitions and attainments of young Australians", and is an added resource for further information. The purpose of this supplement is to provide greater detail about the background of research into the topic of human talent in…

  17. Part B Excess Cost Quick Reference Document

    Science.gov (United States)

    Ball, Wayne; Beridon, Virginia; Hamre, Kent; Morse, Amanda

    2011-01-01

    This Quick Reference Document has been prepared by the Regional Resource Center Program ARRA/Fiscal Priority Team to aid RRCP State Liaisons and other (Technical Assistance) TA providers in understanding the general context of state questions surrounding excess cost. As a "first-stop" for TA providers in investigating excess cost…

  18. A database for TMT interface control documents

    Science.gov (United States)

    Gillies, Kim; Roberts, Scott; Brighton, Allan; Rogers, John

    2016-08-01

    The TMT Software System consists of software components that interact with one another through a software infrastructure called TMT Common Software (CSW). CSW consists of software services and library code that is used by developers to create the subsystems and components that participate in the software system. CSW also defines the types of components that can be constructed and their roles. The use of common component types and shared middleware services allows standardized software interfaces for the components. A software system called the TMT Interface Database System was constructed to support the documentation of the interfaces for components based on CSW. The programmer describes a subsystem and each of its components using JSON-style text files. A command interface file describes each command a component can receive and any commands a component sends. The event interface files describe status, alarms, and events a component publishes and status and events subscribed to by a component. A web application was created to provide a user interface for the required features. Files are ingested into the software system's database. The user interface allows browsing subsystem interfaces, publishing versions of subsystem interfaces, and constructing and publishing interface control documents that consist of the intersection of two subsystem interfaces. All published subsystem interfaces and interface control documents are versioned for configuration control and follow the standard TMT change control processes. Subsystem interfaces and interface control documents can be visualized in the browser or exported as PDF files.

  19. Mined Geologic Disposal System Requirements Document

    International Nuclear Information System (INIS)

    1994-03-01

    This Mined Geologic Disposal System Requirements Document (MGDS-RD) describes the functions to be performed by, and the requirements for, a Mined Geologic Disposal System (MGDS) for the permanent disposal of spent nuclear fuel (SNF) (including SNF loaded in multi-purpose canisters (MPCs)) and commercial and defense high-level radioactive waste (HLW) in support of the Civilian Radioactive Waste Management System (CRWMS). The purpose of the MGDS-RD is to define the program-level requirements for the design of the Repository, the Exploratory Studies Facility (ESF), and Surface Based Testing Facilities (SBTF). These requirements include design, operation, and decommissioning requirements to the extent they impact on the physical development of the MGDS. The document also presents an overall description of the MGDS, its functions (derived using the functional analysis documented by the Physical System Requirements (PSR) documents as a starting point), its segments as described in Section 3.1.3, and the requirements allocated to the segments. In addition, the program-level interfaces of the MGDS are identified. As such, the MGDS-RD provides the technical baseline for the design of the MGDS

  20. Monitored Retrievable Storage System Requirements Document

    International Nuclear Information System (INIS)

    1994-03-01

    This Monitored Retrievable Storage System Requirements Document (MRS-SRD) describes the functions to be performed and technical requirements for a Monitored Retrievable Storage (MRS) facility subelement and the On-Site Transfer and Storage (OSTS) subelement. The MRS facility subelement provides for temporary storage, at a Civilian Radioactive Waste Management System (CRWMS) operated site, of spent nuclear fuel (SNF) contained in an NRC-approved Multi-Purpose Canister (MPC) storage mode, or other NRC-approved storage modes. The OSTS subelement provides for transfer and storage, at Purchaser sites, of spent nuclear fuel (SNF) contained in MPCs. Both the MRS facility subelement and the OSTS subelement are in support of the CRWMS. The purpose of the MRS-SRD is to define the top-level requirements for the development of the MRS facility and the OSTS. These requirements include design, operation, and decommissioning requirements to the extent they impact on the physical development of the MRS facility and the OSTS. The document also presents an overall description of the MRS facility and the OSTS, their functions (derived by extending the functional analysis documented by the Physical System Requirements (PSR) Store Waste Document), their segments, and the requirements allocated to the segments. In addition, the top-level interface requirements of the MRS facility and the OSTS are included. As such, the MRS-SRD provides the technical baseline for the MRS Safety Analysis Report (SAR) design and the OSTS Safety Analysis Report design

  1. SRS Geology/Hydrogeology Environmental Information Document

    International Nuclear Information System (INIS)

    Denham, M.E.

    1999-01-01

    The purpose of the Savannah River Site Geology and Hydrogeology Environmental Information Document (EID) is to provide geologic and hydrogeologic information to serve as a baseline to evaluate potential environmental impacts. This EID is based on a summary of knowledge accumulated from research conducted at the Savannah River Site (SRS) and surrounding areas

  2. Short Communication First documented southern transatlantic ...

    African Journals Online (AJOL)

    The first documented recapture of a South African-tagged juvenile blue shark Prionace glauca off Uruguay lends weight to the hypothesis of a single blue shark population in the South Atlantic. The presence of neonate blue sharks with umbilical scars and females with post-parturition scars, as well as the high frequency of ...

  3. UO3 plant turnover - facility description document

    International Nuclear Information System (INIS)

    Clapp, D.A.

    1995-01-01

    This document was developed to provide a facility description for those portions of the UO 3 Facility being transferred to Bechtel Hanford Company, Inc. (BHI) following completion of facility deactivation. The facility and deactivated state condition description is intended only to serve as an overview of the plant as it is being transferred to BHI

  4. Abstract: Identifying Nurse Education Needs with Documentation ...

    African Journals Online (AJOL)

    Cultural differences have led to the development and implementation of educational topics not reflected in the documentation audit such as professional and institutional accountability rules and regulations for nurses. Conclusions: As nurses in Rwanda implement the change in clinical practice following this study, detailed ...

  5. 225-B ion exchange piping design documentation

    International Nuclear Information System (INIS)

    Prather, M.C.

    1996-02-01

    This document describes the interface between the planned permanent ion exchange piping system and the planned portable ion exchange system. This is part of the Waste Encapsulation and Storage Facility (WESF). In order to decouple this WESF from B-Plant and to improve recovery from a capsule leak, contaminated pool cell water will be recirculated through a portable ion exchange resin system

  6. Documenting Maritime Folklife: An Introductory Guide.

    Science.gov (United States)

    Taylor, David A.

    This booklet has two main purposes: (1) to promote understanding of maritime cultural heritage; and (2) to provide an introduction to the methods for identifying and documenting common maritime traditions. The guide is intended for non-professional researchers and community groups who wish to explore their own maritime cultural heritage. It also…

  7. Document: the radiological survey of the environment

    International Nuclear Information System (INIS)

    Gerno, Linden; Leprieur, F.; Janssens, A.

    2002-01-01

    The document presents the radiological survey of the environment in France today with a comparison of the situation in Switzerland, Germany and Belgium. The evolution of the policy in this activity is also concerned. The laboratories and their monitoring equipment, the regulation and the social impacts are discussed. (A.L.B.)

  8. Script identification in printed bilingual documents

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    and lower zones, together with the character density, is used to identify the script. ... our work, we assume bilingual documents which require script recognition at word level. ... Thus, all the reported studies accomplish script recognition either at the line level ... In this paper, we make an attempt to separate the English and.

  9. Documenting indigenous knowledge about Africa's traditional ...

    African Journals Online (AJOL)

    This article examines the global debates about indigenous knowledge and Africa's traditional medicine. It explores whether it is possible to document all the elements of indigenous knowledge about Africa's traditional medicine that is used for the treatment of diverse forms of sickness. Certain types of Africa's traditional ...

  10. Document image mosaicing: A novel approach

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    MS received 28 April 2003; revised 22 July 2003. Abstract. ... Hence, document image mosaicing is the process of merging split ..... Case 2: Algorithm 2 is an improved version of algorithm 1 which eliminates the drawbacks of ... One of the authors (PS) thanks the All India Council for Technical Education, New Delhi for.

  11. Statically checked documentation with design patterns

    DEFF Research Database (Denmark)

    Cornils, Aino; Hedin, Görel

    2000-01-01

    Over the past years, along with the increase in popularity of design patterns, some problems with the use of design patterns have been identified. The so-called tracing problem describes the difficulty in documenting software systems using design patterns. Initial approaches to solving the tracin...

  12. Internet access to scanned paper documents

    NARCIS (Netherlands)

    Worring, M.; Smeulders, A.W.M.; Witten, I.; Akscyn, R.; Shipman, F.M.

    1998-01-01

    In this contribution we identify the different structures to encounterin a hyperdocument. Methods are described for deriving those structures from scanned paper originals. The content and structure of the document is then made available in a form suited for an Internet browser. It provides

  13. Structure and drafting of safeguards regulatory documents

    International Nuclear Information System (INIS)

    Cole, R.J.; Bennett, C.A.; Edelhertz, H.; Wood, M.T.; Brown, R.J.; Roberts, F.P.

    1977-09-01

    Improving communication of NRU's requirements is the subject of this study. This summary is organized in terms of four decisions on whether safeguards regulatory documents as communication instruments should be an explicit NRC program, what communication methods should be focused on, what actions are feasible and desirable, and how should the NRC divide its effort and resources among desirable actions

  14. Selective Document Retrieval from Encrypted Database

    NARCIS (Netherlands)

    Bösch, C.T.; Tang, Qiang; Hartel, Pieter H.; Jonker, Willem

    We propose the concept of selective document retrieval (SDR) from an encrypted database which allows a client to store encrypted data on a third-party server and perform efficient search remotely. We propose a new SDR scheme based on the recent advances in fully homomorphic encryption schemes. The

  15. IEP Documentation for Effective Systematic Facilitation

    Science.gov (United States)

    Eng, Peng-Sim

    2015-01-01

    This paper discusses how the process for IEP documentation was used in a training program for a group of young inexperienced teachers and teaching aides to effectively address the educational needs of children with diverse disabilities. Teachers at Kianh Centre in Vietnam received explicit instructions for writing effective functional individual…

  16. Waste Management System Description Document (WMSD)

    International Nuclear Information System (INIS)

    1992-02-01

    This report is an appendix of the ''Waste Management Description Project, Revision 1''. This appendix is about the interim approach for the technical baseline of the waste management system. It describes the documentation and regulations of the waste management system requirements and description. (MB)

  17. DART II documentation. Volume III. Appendices

    Energy Technology Data Exchange (ETDEWEB)

    1979-10-01

    The DART II is a remote, interactive, microprocessor-based data acquistion system suitable for use with air monitors. This volume of DART II documentation contains the following appendixes: adjustment and calibration procedures; mother board signature list; schematic diagrams; device specification sheets; ROM program listing; 6800 microprocessor instruction list, octal listing; and cable lists. (RWR)

  18. Hoisting and rigging manual: Uncontrolled document

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-05-01

    This document is a draft copy of a Hoisting and Rigging Manual for the Department of Energy. The manual is divided into ten chapters. The chapter titles follow: terminology and definitions; operator training and qualification; overhead and gantry cranes; mobile cranes; forklift trucks; hoists; hooks; wire rope, slings, and rigging accessories; construction hoisting and rigging equipment requirements; references.

  19. A Framework for Generating Adaptable Hypermedia Documents

    NARCIS (Netherlands)

    L. Rutledge (Lloyd); J.R. van Ossenbruggen (Jacco); L. Hardman (Lynda); D.C.A. Bulterman (Dick)

    1997-01-01

    textabstractBeing able to author a hypermedia document once for presentation under a wide variety of potential circumstances requires that it be stored in a manner that is adaptable to these circumstances. Since the nature of these circumstances is not always known at authoring time, specifying how

  20. 7 CFR 1721.105 - Application documents.

    Science.gov (United States)

    2010-01-01

    ... and Interest § 1721.105 Application documents. (a) Deferments for financial hardship. A Borrower requesting a section 12 deferment because of financial hardship must submit the following: (1) A summary of the financial position of the Borrower, based on the latest information available (usually less than...