WorldWideScience

Sample records for reactor triga heidelberg

  1. TRIGA research reactors; Reacteurs de recherche Triga

    Energy Technology Data Exchange (ETDEWEB)

    Fouquet, D.M.; Razvi, J.; Whittemore, W.L. [Triga General Atomics, San Diego, CA (United States); Duban, B.; Harbonnier, G.; Du Limbert, P.; Durand, J.P. [AREVA/FRAMATOME ANP/CERCA, 92 - Paris-La-Defence (France)

    2004-02-01

    TRIGA (Training, Research, Isotope production, General-Atomic) has become the most used research reactor in the world with 65 units operating in 24 countries. The original patent for TRIGA reactors was registered in 1958. The success of this reactor is due to its inherent level of safety that results from a prompt negative temperature coefficient. Most of the neutron moderation occurs in the nuclear fuel (UZrH) because of the presence of hydrogen atoms, so in case of an increase of fuel temperature, the neutron spectrum becomes harder and neutrons are less likely to fission uranium nuclei and as a consequence the power released decreases. This inherent level of safety has made this reactor fit for training tool in university laboratories. Some recent versions of TRIGA reactors have been designed for medicine and industrial isotope production, for neutron therapy of cancers and for providing a neutron source. (A.C.)

  2. RIA Analysis of Unprotected TRIGA Reactor

    Directory of Open Access Journals (Sweden)

    M.H. Altaf

    2017-07-01

    Full Text Available An RIA (reactivity initiated accident analysis has been carried out for the TRIGA Mark II research reactor considering both step and ramp reactivity ranges within 0.5 % dk/k (< $1 to 2.0 % dk/k (>$2. The insertion time was set at 10 s. Based on the fact that a reactor becomes unprotected if scram does not work at the event of danger, to define unprotected conditions, the time to actuate scram (trip was taken as close to total simulation time. In this long duration of scram inactivity, it is obtained from the present analysis that the reactor remained safe to up to 1.8 % dk/k ($2.57 for step reactivity and 1.99 % dk/k ($2.84 for ramp reactivity. In addition to negative temperature coefficient of reativity, probably the longer time of reactivity insertion keeps TRIGA safe even at larger magnitudes of reactivity during unprotected reactor transients. Coupled point kinetics, neutronics, and thermal hydraulics code EUREKA-2/R has been utilized for this work. It appears that EUREKA-2/RR predicts the sequence of unprotected transient scenario of TRIGA core with good approximation and the results will definitely be helpful for the reactor operators.

  3. Monte Carlo modelling of TRIGA research reactor

    Science.gov (United States)

    El Bakkari, B.; Nacir, B.; El Bardouni, T.; El Younoussi, C.; Merroun, O.; Htet, A.; Boulaich, Y.; Zoubair, M.; Boukhal, H.; Chakir, M.

    2010-10-01

    The Moroccan 2 MW TRIGA MARK II research reactor at Centre des Etudes Nucléaires de la Maâmora (CENM) achieved initial criticality on May 2, 2007. The reactor is designed to effectively implement the various fields of basic nuclear research, manpower training, and production of radioisotopes for their use in agriculture, industry, and medicine. This study deals with the neutronic analysis of the 2-MW TRIGA MARK II research reactor at CENM and validation of the results by comparisons with the experimental, operational, and available final safety analysis report (FSAR) values. The study was prepared in collaboration between the Laboratory of Radiation and Nuclear Systems (ERSN-LMR) from Faculty of Sciences of Tetuan (Morocco) and CENM. The 3-D continuous energy Monte Carlo code MCNP (version 5) was used to develop a versatile and accurate full model of the TRIGA core. The model represents in detailed all components of the core with literally no physical approximation. Continuous energy cross-section data from the more recent nuclear data evaluations (ENDF/B-VI.8, ENDF/B-VII.0, JEFF-3.1, and JENDL-3.3) as well as S( α, β) thermal neutron scattering functions distributed with the MCNP code were used. The cross-section libraries were generated by using the NJOY99 system updated to its more recent patch file "up259". The consistency and accuracy of both the Monte Carlo simulation and neutron transport physics were established by benchmarking the TRIGA experiments. Core excess reactivity, total and integral control rods worth as well as power peaking factors were used in the validation process. Results of calculations are analysed and discussed.

  4. 78 FR 26811 - Dow Chemical Company, Dow TRIGA Research Reactor; License Renewal for the Dow Chemical TRIGA...

    Science.gov (United States)

    2013-05-08

    ... COMMISSION Dow Chemical Company, Dow TRIGA Research Reactor; License Renewal for the Dow Chemical TRIGA Research Reactor; Supplemental Information and Correction AGENCY: Nuclear Regulatory Commission. ACTION... Chemical TRIGA Research Reactor,'' to inform the public that the NRC is considering issuance of a renewed...

  5. RIA Analysis of Unprotected TRIGA Reactor

    OpenAIRE

    Altaf, M.H; Tazul Islam, S.M; N. H. Badrun

    2017-01-01

    An RIA (reactivity initiated accident) analysis has been carried out for the TRIGA Mark II research reactor considering both step and ramp reactivity ranges within 0.5 % dk/k (< $1) to 2.0 % dk/k (>$2). The insertion time was set at 10 s. Based on the fact that a reactor becomes unprotected if scram does not work at the event of danger, to define unprotected conditions, the time to actuate scram (trip) was taken as close to total simulation time. In this long duration of scram inactivit...

  6. Development of capability to Model A TRIGA reactor using ATHENA

    Energy Technology Data Exchange (ETDEWEB)

    Davis, C.B.

    1985-05-01

    The capability to perform thermal-hydraulic analyses of a TRIGA reactor was demonstrated using the ATHENA computer code. TRIGA is an advanced reactor designed to produce electrical power while being inherently safe during reactivity accidents, loss-of-coolant accidents (LOCAs), and station blackout. The TRIGA system contains a water-filled primary system and a power conversion system that utilizes freon as the working fluid. An ATHENA model of a TRIGA-like reactor was developed. Calculations of a station blackout and a large-break LOCA were performed to demonstrate the capability of ATHENA to represent the TRIGA system. A mask of the TRIGA model and an interface with the Nuclear Plant Analyzer (NPA) were developed, allowing a graphic display of the calculated results on the NPA.

  7. Seismic Hazard Analysis of the Bandung Triga 2000 Reactor Site

    OpenAIRE

    Parithusta, Rizkita; P, Sindur; Mangkoesoebroto

    2004-01-01

    SEISMIC HAZARD ANALYSIS OF THE BANDUNG TRIGA 2000 REACTOR SITE. A seismic hazard analysis of the West Java region is carried out to estimate the peak ground acceleration at the Bandung TRIGA 2000 nuclear reactor site. Both the probabilistic and deterministic approaches are employed to better capture the uncertainties considering the enclosing fault systems. Comprehensive analysis is performed based on the newly revised catalog of seismic data, the most recent results of the construction of se...

  8. Small Angle Neutron Scattering instrument at Malaysian TRIGA reactor

    Energy Technology Data Exchange (ETDEWEB)

    Shukri Mohd; Razali Kassim; Zal Uyun Mahmood [Malaysian Inst. for Nuclear Technology Research (MINT), Bangi, Kajang (Malaysia); Shahidan Radiman

    1998-10-01

    The TRIGA MARK II Research reactor at the Malaysian Institute for Nuclear Research (MINT) was commissioned in July 1982. Since then various works have been performed to utilise the neutrons produced from this steady state reactor. One of the project involved the Small Angle Neutron Scattering (SANS). (author)

  9. The TRIGA Reactor Facility at the Armed Forces Radiobiology Research Institute: A Simplified Technical Description.

    Science.gov (United States)

    1986-05-01

    AD-AiS68 238 THE TRIGA REACTOR FACILITY AT THE ARMED FORCESI! RADIOBIOLOGY RESEARCH INST..(U) ARMED FORCES RADIOBIOLOGY RESEARCH INST BETHESDA NO...medium-power exposure. The reactor is also used to train military personnel in reactor operations., The AFRRI TRIGA Mark-F reactor facility is within the...AFRRI complex on the grounds ’of the Naval Medical Command National Capital Region, in Bethesda, Maryland.> TRIGA is an acronym for Training, Research

  10. TRIGA-SPEC: A setup for mass spectrometry and laser spectroscopy at the research reactor TRIGA Mainz

    OpenAIRE

    Ketelaer, J.; Krämer, J.; Beck, D; Blaum, K; Block, M; Eberhardt, K.; Eitel, G.; Ferrer, R.; Geppert, C; George, S; Herfurth, F.; Ketter, J.; Nagy, Sz.; Neidherr, D.; Neugart, R

    2008-01-01

    The research reactor TRIGA Mainz is an ideal facility to provide neutron-rich nuclides with production rates sufficiently large for mass spectrometric and laser spectroscopic studies. Within the TRIGA-SPEC project, a Penning trap as well as a beam line for collinear laser spectroscopy are being installed. Several new developments will ensure high sensitivity of the trap setup enabling mass measurements even on a single ion. Besides neutron-rich fission products produced in the reactor, also h...

  11. Thermal spectra of the TRIGA Mark III reactor; El espectro termico del reactor TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Macias B, L.R.; Palacios G, J. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1998-07-01

    The diffraction phenomenon is gave in observance of the well known Bragg law in crystalline materials and this can be performance by mean of X-rays, electrons and neutrons among others, which allows to do inside the field of each one of these techniques the obtaining of measurements focussed at each one of them. For the present work, it will be mentioned only the referring to X-ray and neutron techniques. The X-ray diffraction due to its properties just it does measurements which are known in general as superficial measurements of the sample material but for the properties of the neutrons, this diffraction it explores in volumetric form the sample material. Since the neutron diffraction process depends lots of its intensity, then it is important to know the neutron source spectra that in this case is supplied by the TRIGA Mark III reactor. Within of diffraction techniques a great number of them can be found, however some of the traditional will be mentioned such as the identification of crystalline samples, phases identification and the textures measurement. At present this last technique is founded on the dot of a minimum error and the technique of phases identification performs but not compete with that which is obtained by mean of X-rays due to this last one has a major resolution. (Author)

  12. United States Domestic Research Reactor Infrastructure - TRIGA Reactor Fuel Support

    Energy Technology Data Exchange (ETDEWEB)

    Morrell, Douglas [Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415 (United States)

    2008-10-29

    The purpose of the United State Domestic Research Reactor Infrastructure Program is to provide fresh nuclear reactor fuel to United States universities at no, or low, cost to the university. The title of the fuel remains with the United States government and when universities are finished with the fuel, the fuel is returned to the United States government. The program is funded by the United States Department of Energy - Nuclear Energy division, managed by Department of Energy - Idaho Field Office, and contracted to the Idaho National Laboratory's Management and Operations Contractor - Battelle Energy Alliance. Program has been at Idaho since 1977 and INL subcontracts with 26 United States domestic reactor facilities (13 TRIGA facilities, 9 plate fuel facilities, 2 AGN facilities, 1 Pulstar fuel facility, 1 Critical facility). University has not shipped fuel since 1968 and as such, we have no present procedures for shipping spent fuel. In addition: floor loading rate is unknown, many interferences must be removed to allow direct access to the reactor tank, floor space in the reactor cell is very limited, pavement ends inside our fence; some of the surface is not finished. The whole approach is narrow, curving and downhill. A truck large enough to transport the cask cannot pull into the lot and then back out (nearly impossible / refused by drivers); a large capacity (100 ton), long boom crane would have to be used due to loading dock obstructions. Access to the entrance door is on a sidewalk. The campus uses it as a road for construction equipment, deliveries and security response. Large trees are on both sides of sidewalk. Spent fuel shipments have never been done, no procedures approved or in place, no approved casks, no accident or safety analysis for spent fuel loading. Any cask assembly used in this facility will have to be removed from one crane, moved on the floor and then attached to another crane to get from the staging area to the reactor room

  13. Accident scenarios of the TRIGA Mark II reactor in Vienna

    Energy Technology Data Exchange (ETDEWEB)

    Villa, Mario, E-mail: mvilla@ati.ac.a [Vienna University of Technology, Atominstitut, Stadionallee 2, 1020 Wien (Austria); Haydn, Markus [Vienna University of Technology, Atominstitut, Stadionallee 2, 1020 Wien (Austria); Steinhauser, Georg, E-mail: georg.steinhauser@ati.ac.a [Vienna University of Technology, Atominstitut, Stadionallee 2, 1020 Wien (Austria); Boeck, Helmuth [Vienna University of Technology, Atominstitut, Stadionallee 2, 1020 Wien (Austria)

    2010-12-15

    The safety report of the TRIGA Mark II reactor in Vienna includes three accident scenarios and their deterministic dose consequences to the environment. The destruction of the cladding of the most activated fuel element, the destruction of all fuel elements and a plane crash were considered scenarios in that report. The calculations were made in 1978 with the software program named STRISK. In this paper, the program package PC Cosyma was applied on the TRIGA Mark II reactor in Vienna and the deterministic consequences of the scenarios to the environment were updated. The fission product inventories of all fuel elements were calculated with ORIGEN2. To get meteorological data of the atmospheric condition around the release area, a weather station was installed. The release parameters were taken from the safety report or were replaced by worst case parameters. This paper focuses on two accident scenarios: the destruction of the cladding of the fuel element with the highest activity content and the case of a large plane crash. The current accident scenarios show good agreement with the calculations from 1978, hence no technical modifications in the safety report of the TRIGA reactor Vienna were necessary. Even in the very worst case scenario - complete destruction of all fuel elements in a large plane crash - the expected doses in the Atominstitut's neighborhood remain moderate.

  14. Computational analysis of irradiation facilities at the JSI TRIGA reactor.

    Science.gov (United States)

    Snoj, Luka; Zerovnik, Gašper; Trkov, Andrej

    2012-03-01

    Characterization and optimization of irradiation facilities in a research reactor is important for optimal performance. Nowadays this is commonly done with advanced Monte Carlo neutron transport computer codes such as MCNP. However, the computational model in such calculations should be verified and validated with experiments. In the paper we describe the irradiation facilities at the JSI TRIGA reactor and demonstrate their computational characterization to support experimental campaigns by providing information on the characteristics of the irradiation facilities. Copyright © 2011 Elsevier Ltd. All rights reserved.

  15. Identification of Thermal Feedback Parameters for a TRIGA Mark-1 Reactor.

    Science.gov (United States)

    An identification procedure is given for determining the thermal feedback parameters for the TRIGA Mark-1 nuclear reactor at The University of Texas...feedback loops, is developed and then simplified. A brief description is given of the TRIGA reactor and the rest of the experimental equipment. The

  16. Modification of the Core Cooling System of TRIGA 2000 Reactor

    Science.gov (United States)

    Umar, Efrizon; Fiantini, Rosalina

    2010-06-01

    To accomplish safety requirements, a set of actions has to be performed following the recommendations of the IAEA safety series 35 applied to research reactor. Such actions are considered in modernization of the old system, improving the core cooling system and safety evaluations. Due to the complexity of the process and the difficulty in putting the apparatus in the reactor core, analytical and experimental study on the determination of flow and temperature distribution in the whole coolant channel are difficult to be done. In the present work, a numerical study of flow and temperature distribution in the coolant channel of TRIGA 2000 has been carried out using CFD package. For this study, simulations were carried out on 3-D tested model. The model consists of the reactor tank, thermal and thermalizing column, reflector, rotary specimen rack, chimney, fuel element, primary pipe, diffuser, beam tube and a part of the core are constructed by 1.50 million unstructured tetrahedral cell elements. The results show that for the initial condition (116 fuel elements in the core) and for the inlet temperature of 24°C and the primary velocity of 5.6 m/s, there no boiling phenomena occur in the coolant channel. Due to this result, it is now possible to improve the core cooling system of TRIGA 2000 reactor. Meanwhile, forced flow from the diffuser system only affected the flow pattern in the outside of chimney and put on a small effect to the fluid flow's velocity in the inside of chimney.

  17. Development of the ageing management database of PUSPATI TRIGA reactor

    Energy Technology Data Exchange (ETDEWEB)

    Ramli, Nurhayati, E-mail: nurhayati@nm.gov.my; Tom, Phongsakorn Prak; Husain, Nurfazila; Farid, Mohd Fairus Abd; Ramli, Shaharum [Reactor Technology Centre, Malaysian Nuclear Agency, MOSTI, Bangi, 43000 Kajang, Selangor (Malaysia); Maskin, Mazleha [Science Program, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, Selangor (Malaysia); Adnan, Amirul Syazwan; Abidin, Nurul Husna Zainal [Faculty of Petroleum and Renewable Energy Engineering, Universiti Teknologi Malaysia (Malaysia)

    2016-01-22

    Since its first criticality in 1982, PUSPATI TRIGA Reactor (RTP) has been operated for more than 30 years. As RTP become older, ageing problems have been seen to be the prominent issues. In addressing the ageing issues, an Ageing Management (AgeM) database for managing related ageing matters was systematically developed. This paper presents the development of AgeM database taking into account all RTP major Systems, Structures and Components (SSCs) and ageing mechanism of these SSCs through the system surveillance program.

  18. Development of the ageing management database of PUSPATI TRIGA reactor

    Science.gov (United States)

    Ramli, Nurhayati; Maskin, Mazleha; Tom, Phongsakorn Prak; Husain, Nurfazila; Farid, Mohd Fairus Abd; Ramli, Shaharum; Adnan, Amirul Syazwan; Abidin, Nurul Husna Zainal

    2016-01-01

    Since its first criticality in 1982, PUSPATI TRIGA Reactor (RTP) has been operated for more than 30 years. As RTP become older, ageing problems have been seen to be the prominent issues. In addressing the ageing issues, an Ageing Management (AgeM) database for managing related ageing matters was systematically developed. This paper presents the development of AgeM database taking into account all RTP major Systems, Structures and Components (SSCs) and ageing mechanism of these SSCs through the system surveillance program.

  19. 76 FR 69296 - University of Utah, University of Utah TRIGA Nuclear Reactor, Notice of Issuance of Renewed...

    Science.gov (United States)

    2011-11-08

    ... COMMISSION University of Utah, University of Utah TRIGA Nuclear Reactor, Notice of Issuance of Renewed... Test Reactor Licensing Branch, Division of Policy and Rulemaking, Office of Nuclear Reactor Regulation... University of Utah (UU, the licensee), which authorizes continued operation of the UU TRIGA Nuclear Reactor...

  20. New burnup calculation of TRIGA IPR-R1 reactor

    Energy Technology Data Exchange (ETDEWEB)

    Meireles, Sincler P. de; Campolina, Daniel de A.M.; Santos, Andre A. Campagnole dos; Menezes, Maria A.B.C.; Mesquita, Amir Z., E-mail: sinclercdtn@hotmail.com.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2015-07-01

    The IPR-R1 TRIGA Mark I research reactor, located at the Nuclear Technology Development Center - CDTN, Belo Horizonte, Brazil, operates since 1960.The reactor is operating for more than fifty years and has a long history of operation. Determining the current composition of the fuel is very important to calculate various parameters. The reactor burnup calculation has been performed before, however, new techniques, methods, software and increase of the processing capacity of the new computers motivates new investigations to be performed. This work presents the evolution of effective multiplication constant and the results of burnup. This new model has a more detailed geometry with the introduction of the new devices, like the control rods and the samarium discs. This increase of materials in the simulation in burnup calculation was very important for results. For these series of simulations a more recently cross section library, ENDF/B-VII, was used. To perform the calculations two Monte Carlo particle transport code were used: Serpent and MCNPX. The results obtained from two codes are presented and compared with previous studies in the literature. (author)

  1. 77 FR 42771 - License Renewal for the Dow Chemical TRIGA Research Reactor

    Science.gov (United States)

    2012-07-20

    ... COMMISSION License Renewal for the Dow Chemical TRIGA Research Reactor AGENCY: Nuclear Regulatory Commission... Research Reactor is located on the Michigan Division of the Dow Chemical Company in Midland, MI and is a... INFORMATION CONTACT: Geoffrey A. Wertz, Project Manager, Research and Test Reactor Licensing Branch, Division...

  2. Neutronics analysis of TRIGA Mark II research reactor

    Directory of Open Access Journals (Sweden)

    Haseebur Rehman

    2018-02-01

    Full Text Available This article presents clean core criticality calculations and control rod worth calculations for TRIGA (Training, Research, Isotope production-General Atomics Mark II research reactor benchmark cores using Winfrith Improved Multi-group Scheme-D/4 (WIMS-D/4 and Program for Reactor In-core Analysis using Diffusion Equation (PRIDE codes. Cores 133 and 134 were analyzed in 2-D (r, θ and 3-D (r, θ, z, using WIMS-D/4 and PRIDE codes. Moreover, the influence of cross-section data was also studied using various libraries based on Evaluated Nuclear Data File (ENDF/B-VI.8 and VII.0, Joint Evaluated Fission and Fusion File (JEFF-3.1, Japanese Evaluated Nuclear Data Library (JENDL-3.2, and Joint Evaluated File (JEF-2.2 nuclear data. The simulation results showed that the multiplication factor calculated for all these data libraries is within 1% of the experimental results. The reactivity worth of the control rods of core 134 was also calculated with different homogenization approaches. A comparison was made with experimental and reported Monte Carlo results, and it was found that, using proper homogenization of absorber regions and surrounding fuel regions, the results obtained with PRIDE code are significantly improved.

  3. The new neutron imaging facility at TRIGA reactor in Morocco

    Energy Technology Data Exchange (ETDEWEB)

    Ouardi, A.; Alami, R.; Bensitel, A. [Centre National de l' Energie des Science et des Techniques Nucleaires, PB.1382 R.P 10001 Rabat (Morocco)

    2011-07-01

    A new neutron imaging facility is currently developed around 2 MW TRIGA MARK-II reactor at Maamora Nuclear research centre (CENM). Neutron imaging combined to X-ray or gamma radiography offers the opportunity to extend Non Destructive Testing (NDT) activities DT in Morocco to new fields of applications such as space and aircraft Moroccan industry, mining, wood industry and Archeology. The facility is planed to be completed in the end of 2011. In order to reduce the gamma-ray content in the neutron beam, the reactor tangential channel is selected. For power of 2 MW, the corresponding thermal neutron flux at the inlet of the tangential channel is around 1.10{sup 13}ncm{sup 2}/s. The facility will be based on a conical neutron collimator with a flight tube of 8m and offers three circular diaphragms with diameters of 1cm, 2 cm and 4 cm corresponding to L/D-ratio varying between 200 and 600. The holes will be housed in the primary shutter. These diaphragms' sizes allow to perform neutron radiography with high resolution (L/D = 600) and high speed (L/D= 200). Monte Carlo calculations by a fully 3D numerical code GEANT4 are used to optimize the whole neutron beam line and to reach a shorten distance between the source and detector and reduce as possible the exposure time. (author)

  4. Automated power control system for reactor TRIGA PUSPATI

    Science.gov (United States)

    Ghazali, Anith Khairunnisa; Minhat, Mohd Sabri; Hassan, Mohd Khair

    2017-01-01

    Reactor TRIGA PUSPATI (RTP) Mark II type undergoes safe operation for more than 30 years and the only research reactor exists in Malaysia. The main safety feature of Instrumentation and Control (I&C) system design is such that any failure in the electronic, or its associated components, does not lead to an uncontrolled rate of reactivity. The existed controller using feedback approach to control the reactor power. This paper introduces proposed controllers such as Model Reference Adaptive Control (MRAC) and Proportional Integral Derivatives (PID) controller for the RTP simulation. In RTP, the most important considered parameter is the reactor power and act as nervous system. To design a controller for complex plant like RTP is quite difficult due to high cost and safety factors cause by the failure of the controller. Furthermore, to overcome these problems, a simulator can be used to replace functions the hardware and test could then be simulated using this simulator. In order to find the best controller, several controllers were proposed and the result will be analysed for study the performances of the controller. The output result will be used to find out the best RTP power controller using MATLAB/Simulink and gives result as close as the real RTP performances. Currently, the structures of RTP was design using MATLAB/Simulink tool that consist of fission chamber, controller, control rod position, height-to-worth of control rods and a RTP model. The controller will control the control rod position to make sure that the reactivity still under the limitation parameter. The results given from each controller will be analysed and validated through experiment data collected from RTP.

  5. TRIGA-SPEC: A setup for mass spectrometry and laser spectroscopy at the research reactor TRIGA Mainz

    Science.gov (United States)

    Ketelaer, J.; Krämer, J.; Beck, D.; Blaum, K.; Block, M.; Eberhardt, K.; Eitel, G.; Ferrer, R.; Geppert, C.; George, S.; Herfurth, F.; Ketter, J.; Nagy, Sz.; Neidherr, D.; Neugart, R.; Nörtershäuser, W.; Repp, J.; Smorra, C.; Trautmann, N.; Weber, C.

    2008-09-01

    The research reactor TRIGA Mainz is an ideal facility to provide neutron-rich nuclides with production rates sufficiently large for mass spectrometric and laser spectroscopic studies. Within the TRIGA-SPEC project, a Penning trap as well as a beamline for collinear laser spectroscopy are being installed. Several new developments will ensure high sensitivity of the trap setup enabling mass measurements even on a single ion. Besides neutron-rich fission products produced in the reactor, also heavy nuclides such as 235U or 252Cf can be investigated for the first time with an off-line ion source. The data provided by the mass measurements will be of interest for astrophysical calculations on the rapid neutron-capture process as well as for tests of mass models in the heavy-mass region. The laser spectroscopic measurements will yield model-independent information on nuclear ground-state properties such as nuclear moments and charge radii of neutron-rich nuclei of refractory elements far from stability. TRIGA-SPEC also serves as a test facility for mass and laser spectroscopic experiments at SHIPTRAP and the low-energy branch of the future GSI facility FAIR. This publication describes the experimental setup as well as its present status.

  6. Radiation Field Characterization for the AFRRI TRIGA Reactor. Volume I. Baseline Measurements and Evaluation of Calculational Data.

    Science.gov (United States)

    1981-06-01

    CHARACTERIZATION FOR THE AFRRI TRIGA REACTOR Volume I-Baseline Measurements and Evaluation rŘ of Calculational Data Science Applications, Incorporated...KEY WORDS (Cmehum an re. aide af necoew and Id..ad& by’ Week mbahe) Radiation Neutron-Spectral Mieasurements Samma-Ray Reactor AFRRI TRIGA 26...Characteristics . . . . . . . .. 10 2. Threshold Foil Activations for AFRRI TRIGA ..... .. 18 3. Calculated and Measured Neutron Flux Per Group Per Kilowatt

  7. Thermal hydraulics modeling of the US Geological Survey TRIGA reactor

    Science.gov (United States)

    Alkaabi, Ahmed K.

    The Geological Survey TRIGA reactor (GSTR) is a 1 MW Mark I TRIGA reactor located in Lakewood, Colorado. Single channel GSTR thermal hydraulics models built using RELAP5/MOD3.3, RELAP5-3D, TRACE, and COMSOL Multiphysics predict the fuel, outer clad, and coolant temperatures as a function of position in the core. The results from the RELAP5/MOD3.3, RELAP5-3D, and COMSOL models are similar. The TRACE model predicts significantly higher temperatures, potentially resulting from inappropriate convection correlations. To more accurately study the complex fluid flow patterns within the core, this research develops detailed RELAP5/MOD3.3 and COMSOL multichannel models of the GSTR core. The multichannel models predict lower fuel, outer clad, and coolant temperatures compared to the single channel models by up to 16.7°C, 4.8°C, and 9.6°C, respectively, as a result of the higher mass flow rates predicted by these models. The single channel models and the RELAP5/MOD3.3 multichannel model predict that the coolant temperatures in all fuel rings rise axially with core height, as the coolant in these models flows predominantly in the axial direction. The coolant temperatures predicted by the COMSOL multichannel model rise with core height in the B-, C-, and D-rings and peak and then decrease in the E-, F-, and G-rings, as the coolant tends to flow from the bottom sides of the core to the center of the core in this model. Experiments at the GSTR measured coolant temperatures in the GSTR core to validate the developed models. The axial temperature profiles measured in the GSTR show that the flow patterns predicted by the COMSOL multichannel model are consistent with the actual conditions in the core. Adjusting the RELAP5/MOD3.3 single and multichannel models by modifying the axial and cross-flow areas allow them to better predict the GSTR coolant temperatures; however, the adjusted models still fail to predict accurate axial temperature profiles in the E-, F-, and G-rings.

  8. Measurements of Thermal Power at the TRIGA Mark II Reactor in Ljubljana Using Multiple Detectors

    Science.gov (United States)

    Žerovnik, Gašper; Snoj, Luka; Trkov, Andrej; Barbot, Loïc; Fourmentel, Damien; Villard, Jean-François

    2014-10-01

    The aim of the current bilateral project between CEA Cadarache and JSI is to improve the accuracy of the online thermal power monitoring at the JSI TRIGA reactor. Simultaneously, a new wide range multichannel acquisition system for fission chambers, recently developed by CEA, is tested. In the paper, calculational and experimental power calibration methods are described. The focus is on use of multiple detectors in combination with pre-calculated and pre-measured control-rod-position-dependent correction factors to improve the reactor power reading. The system will be implemented and tested at the JSI TRIGA reactor in 2014.

  9. 78 FR 5840 - Notice of License Termination for University of Illinois Advanced TRIGA Reactor, License No. R-115

    Science.gov (United States)

    2013-01-28

    ... COMMISSION Notice of License Termination for University of Illinois Advanced TRIGA Reactor, License No. R-115... No. R-115, for the University of Illinois Advanced TRIGA Reactor (ATR). The NRC has terminated the..., Facility Operating License No. R-115 is terminated. The above referenced documents may be examined, and/or...

  10. Experimental and simulated dosimetry of the university of Utah TRIGA reactor

    Science.gov (United States)

    Marble, Benjamin James

    Simulated neutron and gamma transport enable the gamma dose to be estimated at the surface of the University of Utah TRIGA Reactor UUTR pool. These results are benchmarked against experimental results for model verification. This model is useful for future licensing and possible reactor power upgrades. MCNP5 was utilized for the UUTR simulation and comparison with thermoluminescent detectors TLDs.

  11. TRIGA-SPEC: A setup for mass spectrometry and laser spectroscopy at the research reactor TRIGA Mainz

    CERN Document Server

    Ketelaer, J; Beck, D; Blaum, K; Block, M; Eberhardt, K; Eitel, G; Ferrer, R; Geppert, C; George, S; Herfurth, F; Ketter, J; Nagy, Sz; Neidherr, D; Neugart, R; Nörtershäuser, W; Repp, J; Smorra, C; Trautmann, N; Weber, C

    2008-01-01

    The research reactor TRIGA Mainz is an ideal facility to provide neutron-rich nuclides with production rates sufficiently large for mass spectrometric and laser spectroscopic studies. Within the TRIGA-SPEC project, a Penning trap as well as a beam line for collinear laser spectroscopy are being installed. Several new developments will ensure high sensitivity of the trap setup enabling mass measurements even on a single ion. Besides neutron-rich fission products produced in the reactor, also heavy nuclides such as 235-U or 252-Cf can be investigated for the first time with an off-line ion source. The data provided by the mass measurements will be of interest for astrophysical calculations on the rapid neutron-capture process as well as for tests of mass models in the heavy-mass region. The laser spectroscopic measurements will yield model-independent information on nuclear ground-state properties such as nuclear moments and charge radii of neutron-rich nuclei of refractory elements far from stability. This pub...

  12. ANALYSIS OF GAMMA HEATING AT TRIGA MARK REACTOR CORE BANDUNG USING PLATE TYPE FUEL

    Directory of Open Access Journals (Sweden)

    Setiyanto Setiyanto

    2016-10-01

    Full Text Available ABSTRACT In accordance with the discontinuation of TRIGA fuel element production by its producer, the operation of all TRIGA type reactor of at all over the word will be disturbed, as well as TRIGA reactor in Bandung. In order to support the continuous operation of Bandung TRIGA reactor, a study on utilization of fuel plate mode, as used at RSG-GAS reactor, to replace the cylindrical model has been done. Various assessments have been done, including core design calculation and its safety aspects. Based on the neutronic calculation, utilization of fuel plate shows that Bandung TRIGA reactor can be operated by 20 fuel elements only. Compared with the original core, the new reactor core configuration is smaller and it results in some empty space that can be used for in-core irradiation facilities. Due to the existing of in-core irradiation facilities, the gamma heating value became a new factor that should be evaluated for safety analysis. For this reason, the gamma heating for TRIGA Bandung reactor using fuel plate was calculated by Gamset computer code. The calculations based on linear attenuation equations, line sources and gamma propagation on space. Calculations were also done for reflector positions (Lazy Susan irradiation facilities and central irradiation position (CIP, especially for any material samples. The calculation results show that gamma heating for CIP is significantly important (0,87 W/g, but very low value for Lazy Susan position (lest then 0,11 W/g. Based on this results, it can be concluded that the utilization of CIP as irradiation facilities need to consider of gamma heating as data for safety analysis report. Keywords: gamma heating, nuclear reactor, research reactor, reactor safety.   ABSTRAK Dengan dihentikannya produksi elemen bakar reaktor jenis Triga oleh produsen, maka semua reaktor TRIGA di dunia terganggu operasinya, termasuk juga reaktor TRIGA 2000 di Bandung. Untuk mendukung pengoperasian reaktor TRIGA Bandung

  13. Sipping test update device for fuel elements cladding inspections in IPR-r1 TRIGA reactor

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, R.R.; Mesquita, A.Z.; Andrade, E.P.D.; Gual, Maritza R., E-mail: rrr@cdtn.br, E-mail: amir@cdtn.br, E-mail: edson@cdtn.br, E-mail: maritzargual@gmail.com [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2015-07-01

    It is in progress at the Centro de Desenvolvimento da Tecnologia Nuclear - CDTN (Nuclear Technology Development Center), a research project that aims to investigate possible leaks in the fuel elements of the TRIGA reactor, located in this research center. This paper presents the final form of sipping test device for TRIGA reactor, and results of the first experiments setup. Mechanical support strength tests were made by knotting device on the crane, charged with water from the conventional water supply, and tests outside the reactor pool with the use of new non-irradiated fuel elements encapsulated in stainless steel, and available safe stored in this unit. It is expected that tests with graphite elements from reactor pool are done soon after and also the test experiment with the first fuel elements in service positioned in the B ring (central ring) of the reactor core in the coming months. (author)

  14. Natural and mixed convection in the cylindrical pool of TRIGA reactor

    Science.gov (United States)

    Henry, R.; Tiselj, I.; Matkovič, M.

    2017-02-01

    Temperature fields within the pool of the JSI TRIGA MARK II nuclear research reactor were measured to collect data for validation of the thermal hydraulics computational model of the reactor tank. In this context temperature of the coolant was measured simultaneously at sixty different positions within the pool during steady state operation and two transients. The obtained data revealed local peculiarities of the cooling water dynamics inside the pool and were used to estimate the coolant bulk velocity above the reactor core. Mixed natural and forced convection in the pool were simulated with a Computational Fluid Dynamics code. A relatively simple CFD model based on Unsteady RANS turbulence model was found to be sufficient for accurate prediction of the temperature fields in the pool during the reactor operation. Our results show that the simple geometry of the TRIGA pool reactor makes it a suitable candidate for a simple natural circulation benchmark in cylindrical geometry.

  15. Fluid Flow Characteristic Simulation of the Original TRIGA 2000 Reactor Design Using Computational Fluid Dynamics Code

    Science.gov (United States)

    Fiantini, Rosalina; Umar, Efrizon

    2010-06-01

    Common energy crisis has modified the national energy policy which is in the beginning based on natural resources becoming based on technology, therefore the capability to understanding the basic and applied science is needed to supporting those policies. National energy policy which aims at new energy exploitation, such as nuclear energy is including many efforts to increase the safety reactor core condition and optimize the related aspects and the ability to build new research reactor with properly design. The previous analysis of the modification TRIGA 2000 Reactor design indicates that forced convection of the primary coolant system put on an effect to the flow characteristic in the reactor core, but relatively insignificant effect to the flow velocity in the reactor core. In this analysis, the lid of reactor core is closed. However the forced convection effect is still presented. This analysis shows the fluid flow velocity vector in the model area without exception. Result of this analysis indicates that in the original design of TRIGA 2000 reactor, there is still forced convection effects occur but less than in the modified TRIGA 2000 design.

  16. Characterization of the TRIGA Mark II reactor full-power steady state

    OpenAIRE

    Cammi, Antonio; Zanetti, Matteo; Chiesa, Davide; Clemenza, Massimiliano; Pozzi, Stefano; Previtali, Ezio; Sisti, Monica; Magrotti, Giovanni; Prata, Michele; Salvini, Andrea

    2015-01-01

    In this work, the characterization of the full-power steady state of the TRIGA Mark II nuclear reactor of the University of Pavia is performed by coupling Monte Carlo (MC) simulation for neutronics with "Multiphysics" model for thermal-hydraulics. Neutronic analyses have been performed starting from a MC model of the entire reactor system, based on the MCNP5 code, that was already validated in fresh fuel and zero-power configuration (in which thermal effects are negligible) using the availabl...

  17. Monte Carlo design for a new neutron collimator at the ENEA Casaccia TRIGA reactor.

    Science.gov (United States)

    Burgio, N; Rosa, R

    2004-10-01

    The TRIGA RC-1 1MW reactor operating at ENEA Casaccia Center is currently being developed as a second neutron imaging facility that shall be devoted to computed tomography as well as neutron tomography. In order to reduce the gamma-ray content in the neutron beam, the reactor tangential piercing channel was selected. A set of Monte Carlo simulation was used to design the neutron collimator, to determine the preliminary choice of the materials to be employed in the collimator design.

  18. Conceptual design of fuel transfer cask for Reactor TRIGA PUSPATI (RTP)

    Science.gov (United States)

    Muhamad, Shalina Sheik; Hamzah, Mohd Arif Arif B.

    2014-02-01

    Spent fuel transfer cask is used to transfer a spent fuel from the reactor tank to the spent fuel storage or for spent fuel inspection. Typically, the cask made from steel cylinders that are either welded or bolted closed. The cylinder is enclosed with additional steel, concrete, or other material to provide radiation shielding and containment of the spent fuel. This paper will discuss the Conceptual Design of fuel transfer cask for Reactor TRIGA Puspati (RTP).

  19. Role of decommissioning plan and its progress for the PUSPATI TRIGA Reactor

    Science.gov (United States)

    Zakaria, Norasalwa; Mustafa, Muhammad Khairul Ariff; Anuar, Abul Adli; Idris, Hairul Nizam; Ba'an, Rohyiza

    2014-02-01

    Malaysian nuclear research reactor, the PUSPATI TRIGA Reactor, reached its first criticality in 1982, and since then, it has been serving for more than 30 years for training, radioisotope production and research purposes. Realizing the age and the need for its decommissioning sometime in the future, a ground basis of assessment and an elaborative project management need to be established, covering the entire process from termination of reactor operation to the establishment of final status, documented as the Decommissioning Plan. At international level, IAEA recognizes the absence of Decommissioning Plan as one of the factors hampering progress in decommissioning of nuclear facilities in the world. Throughout the years, IAEA has taken initiatives and drawn out projects in promoting progress in decommissioning programmes, like CIDER, DACCORD and R2D2P, for which Malaysia is participating in these projects. This paper highlights the concept of Decommissioning plan and its significances to the Agency. It will also address the progress, way forward and challenges faced in developing the Decommissioning Plan for the PUSPATI TRIGA Reactor. The efforts in the establishment of this plan helps to provide continual national contribution at the international level, as well as meeting the regulatory requirement, if need be. The existing license for the operation of PUSPATI TRIGA Reactor does not impose a requirement for a decommissioning plan; however, the renewal of license may call for a decommissioning plan to be submitted for approval in future.

  20. Role of decommissioning plan and its progress for the PUSPATI TRIGA Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Zakaria, Norasalwa, E-mail: norasalwa@nuclearmalaysia.gov.my; Mustafa, Muhammad Khairul Ariff, E-mail: norasalwa@nuclearmalaysia.gov.my; Anuar, Abul Adli, E-mail: norasalwa@nuclearmalaysia.gov.my; Idris, Hairul Nizam, E-mail: norasalwa@nuclearmalaysia.gov.my; Ba' an, Rohyiza, E-mail: norasalwa@nuclearmalaysia.gov.my [Malaysian Nuclear Agency, 43000 Kajang, Selangor (Malaysia)

    2014-02-12

    Malaysian nuclear research reactor, the PUSPATI TRIGA Reactor, reached its first criticality in 1982, and since then, it has been serving for more than 30 years for training, radioisotope production and research purposes. Realizing the age and the need for its decommissioning sometime in the future, a ground basis of assessment and an elaborative project management need to be established, covering the entire process from termination of reactor operation to the establishment of final status, documented as the Decommissioning Plan. At international level, IAEA recognizes the absence of Decommissioning Plan as one of the factors hampering progress in decommissioning of nuclear facilities in the world. Throughout the years, IAEA has taken initiatives and drawn out projects in promoting progress in decommissioning programmes, like CIDER, DACCORD and R2D2P, for which Malaysia is participating in these projects. This paper highlights the concept of Decommissioning plan and its significances to the Agency. It will also address the progress, way forward and challenges faced in developing the Decommissioning Plan for the PUSPATI TRIGA Reactor. The efforts in the establishment of this plan helps to provide continual national contribution at the international level, as well as meeting the regulatory requirement, if need be. The existing license for the operation of PUSPATI TRIGA Reactor does not impose a requirement for a decommissioning plan; however, the renewal of license may call for a decommissioning plan to be submitted for approval in future.

  1. Comparison of AFRRI (Armed Forces Radiobiology Research Institute) and ETCA (Etablissement Technique Central de l’Armament) Dosimetry Measurements at AFRRI TRIGA (Training Research Isotopes General Atomic) Reactor

    Science.gov (United States)

    1987-11-01

    TECHNICAL REPORT Comparison of AFRRI and ETCA dosimetry measurements at AFRRI TRIGA reactor M. Dooley G. H. Zeman DEFENSE NUCLEAR AGENCY ARMED...Research Institute (AFRRI) TRIGA (Training Research Isotopes General Atomic) reactor on 10-12 September 1985. The purpose of the experiment was to...anthropomorphic dosimetry phantom (a Incite cylinder 30 cm in diameter and 60 cm tall) in exposure room 1 of the AFRRI TRIGA reactor. As reference

  2. Immobilization of ion exchange radioactive resins of the TRIGA Mark III nuclear reactor; Inmovilizacion de resinas de intercambio ionico radiactivas del reactor nuclear Triga Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Garcia M, H.; Emeterio H, M.; Canizal S, C. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, C.P. 11801 Mexico D.F. (Mexico)

    2000-07-01

    This work has the objective to develop the process and to define the agglutinating material which allows the immobilization of the ion exchange radioactive resins coming from the TRIGA Mark III nuclear reactor contaminated with Ba-133, Co-60, Cs-137, Eu-152, and Mn-54 through the behavior analysis of different immobilization agents such as: bitumens, cement and polyester resin. According to the International Standardization the archetype samples were observed with the following tests: determination of free liquid, leaching, charge resistance, biodegradation, irradiation, thermal cycle, burned resistance. Generally all the tests were satisfactorily achieved, for each agent. Therefore, the polyester resin could be considered as the main immobilizing. (Author)

  3. Installation and operation of a high-temperature surface ion source for the online coupling of TRIGA-SPEC to the TRIGA Mainz research reactor and high-precision mass measurements of transuranium nuclides at TRIGA-TRAP

    Energy Technology Data Exchange (ETDEWEB)

    Renisch, Dennis

    2016-06-23

    The TRIGA-SPEC setup is dedicated for high-precision measurements of ground-state properties of exotic nuclides, like fission products or transuranium nuclides. For the online coupling of TRIGA-SPEC to the TRIGA Mainz research reactor, fission products are transported from a target chamber close to the reactor core by a gas-jet system to an ion source, which provides the connected experiments with a radioactive ion beam for the actual measurements. The design, installation and operation of the online ion source was a major part of the work described in this thesis. In addition, investigations on the optimal conditions of the gas-jet system for a reliable ion source operation were performed and the coupling of the ion source part to the subsequent elements of the beamline was conducted. The second part of this thesis deals with high-precision mass measurements on transuranium nuclides with the Penning-trap mass spectrometer TRIGA-TRAP, which is one branch of the TRIGA-SPEC setup. These measurements contribute to a mapping of the region of the chart of nuclides around the deformed shell closure at N=152. The masses of some of the investigated nuclides are directly measured for the first time. Due to the appearance of systematic inconsistencies during the evaluation of the mass measurements, the focus of the final section of this thesis lies in the identification and correction of the sources of the observed inconsistencies.

  4. Neutron collimator for neutron radiography applications at tangential port of the TRIGA RC-1 reactor

    Science.gov (United States)

    Rosa, R.; Andreoli, F.; Mattoni, M.; Palomba, M.

    2009-06-01

    At the ENEA TRIGA research reactor (Casaccia Research Center, Rome) a new neutron collimator has been designed and installed at the neutron tangential channel. This collimator, that is part of a neutron/X-ray facility for NDT analysis, was experimentally characterized and optimized in terms of thermal neutron fluence rate, spatial/energetic distribution, photon air KERMA and effective beam diameter. This paper shows the methodologies and the results of the experimental analysis that were carried out.

  5. Thermal power evaluation of the TRIGA nuclear reactor at CDTN in operations of long duration

    Energy Technology Data Exchange (ETDEWEB)

    Mesquita, Amir Zacarias; Ferreira, Andrea Vidal; Rezende, Hugo Cesar, E-mail: amir@cdtn.b, E-mail: avf@cdtn.b, E-mail: hcr@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2010-07-01

    The standard operations of nuclear research reactor IPR-R1 TRIGA located at CDTN (Belo Horizonte) usually have duration of not more than 8h. However in 2009 two operations for samples irradiations lasted about 12 hours each at a power of 100 kW. These long lasting operations started in the evening and most of them were carried out at night, when there are only small fluctuations in atmosphere temperature. Therefore the conditions were ideal for evaluating the thermal balance of the power dissipated by the reactor core through the forced cooling system. Heat balance is the standard methodology for power calibration of the IPR-R1 reactor. As in any reactor operation, the main operating parameters were monitored and stored by the Data Acquisition System developed for the reactor. These data have been used for the analysis and calculation of the evolution of several neutronic and thermalhydraulic parameters involved in the reactor operation. This paper analyzes the two long lasting operations of the IPR-R1 TRIGA and compares the recorded results for the power dissipated through the primary cooling loop with the results of the power calibration conducted in March 2009. The results corresponded to those of the thermal power calibration within the uncertainty of this methodology, indicating system stability over a period of six months. (author)

  6. Estimation of Na-24 activity concentration in BAEC TRIGA Research Reactor

    Directory of Open Access Journals (Sweden)

    M. Ajijul Hoq

    Full Text Available The Bangladesh Atomic Energy Commission (BAEC TRIGA Research Reactor is a unique nuclear installation of the country generally implemented for a wide variety of research applications and serves as an excellent source of neutron. During reactor operation it is necessary to measure and control the activity concentration of the pool water for fuel element failure detection and for the determination of contamination. The present study deals with the estimation of activity concentration for Na-24 present in water coolant produced as a result of 23Na (n, γ 24Na reaction. Several governing equations have been employed to estimate the Na-24 activity concentrations theoretically at different reactor power levels including maximum reactor power of 2.4 MW. From the obtained result it is ensured that the estimated Na-24 activity of 8.83 × 10−3 μCi/cm3 is not significant enough for any radiological hazard. Thus for ensuring radiological safety issues of the research reactor the assessment performed under the present study has an implication. Keywords: TRIGA Research Reactor, Na-24, Activity concentration, Purification system, Water impurity, Radiological safety

  7. Transition from HEU to LEU fuel in Romania`s 14-MW TRIGA reactor

    Energy Technology Data Exchange (ETDEWEB)

    Bretscher, M.M.; Snelgrove, J.L.

    1991-12-31

    The 14-MW TRIGA steady state reactor (SSR) located in Pitesti, Romania, first went critical in the fall of 1979. Initially, the core configuration for full power operation used 29 fuel clusters each containing a 5 {times} 5 square array of HEU (10 wt%) -- ZrH -- Er (2.8 wt%) fuel-moderator rods (1.295 cm o.d.) clad in Incology. With a total inventory of 35 HEU fuel clusters, burnup considerations required a gradual expansion of the core from 29 to 32 and finally to 35 clusters before the reactor was shut down because of insufficient excess reactivity. At this time each of the original 29 fuel clusters had an overage {sup 235}U burnup in the range from 50 to 62%. Because of the US policy regarding the export of highly enriched uranium, fresh HEU TRIGA replacement fuel is not available. After a number of safety-related measurements, the SSR is expected to resume full power operation in the near future using a mixed core containing five LEU TRIGA clusters of the same geometry as the original fuel but with fuel-moderator rods containing 45 wt% U (19.7% {sup 235}U enrichment) and 1.1 wt% Er. Rods for 14 additional LEU fuel clusters will be fabricated by General Atomics. In support of the SSR mixed core operation numerous neutronic calculations have been performed. This paper presents some of the results of those calculations.

  8. Neutron flux characterisation of the Pavia TRIGA Mark II research reactor for radiobiological and microdosimetric applications.

    Science.gov (United States)

    Alloni, D; Prata, M; Salvini, A; Ottolenghi, A

    2015-09-01

    Nowadays the Pavia TRIGA reactor is available for national and international collaboration in various research fields. The TRIGA Mark II nuclear research reactor of the Pavia University offers different in- and out-core neutron irradiation channels, each characterised by different neutron spectra. In the last two years a campaign of measurements and simulations has been performed in order to guarantee a better characterisation of these different fluxes and to meet the demands of irradiations that require precise information on these spectra in particular for radiobiological and microdosimetric studies. Experimental data on neutron fluxes have been collected analysing and measuring the gamma activity induced in thin target foils of different materials irradiated in different TRIGA experimental channels. The data on the induced gamma activities have been processed with the SAND II deconvolution code and finally compared with the spectra obtained with Monte Carlo simulations. The comparison between simulated and measured spectra showed a good agreement allowing a more precise characterisation of the neutron spectra and a validation of the adopted method. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  9. Large Object Irradiation Facility In The Tangential Channel Of The JSI TRIGA Reactor

    CERN Document Server

    Radulovic, Vladimir; Kaiba, Tanja; Kavsek, Darko; Cindro, Vladimir; Mikuz, Marko; Snoj, Luka

    2017-01-01

    This paper presents the design and installation of a new irradiation device in the Tangential Channel of the JSI TRIGA reactor in Ljubljana, Slovenia. The purpose of the device is to enable on-line irradiation testing of electronic components considerably larger in size (of lateral dimensions of at least 12 cm) than currently possible in the irradiation channels located in the reactor core, in a relatively high neutron flux (exceeding 10^12 n cm^-2 s^-1) and to provide adequate neutron and gamma radiation shielding.

  10. Performance of the solid deuterium ultra-cold neutron source at the pulsed reactor TRIGA Mainz

    Science.gov (United States)

    Karch, J.; Sobolev, Yu.; Beck, M.; Eberhardt, K.; Hampel, G.; Heil, W.; Kieser, R.; Reich, T.; Trautmann, N.; Ziegner, M.

    2014-04-01

    The performance of the solid deuterium ultra-cold neutron (UCN) source at the pulsed reactor TRIGA Mainz with a maximum peak energy of 10MJ is described. The solid deuterium converter with a volume of cm3 (8mol), which is exposed to a thermal neutron fluence of n/cm2, delivers up to 240000 UCN ( m/s) per pulse outside the biological shield at the experimental area. UCN densities of 10 cm3 are obtained in stainless-steel bottles of 10 L. The measured UCN yields compare well with the predictions from a Monte Carlo simulation developed to model the source and to optimize its performance for the upcoming upgrade of the TRIGA Mainz into a user facility for UCN physics.

  11. Analysis of safety limits of the Moroccan TRIGA MARK II research reactor

    Science.gov (United States)

    Erradi, L.; Essadki, H.

    2001-06-01

    The main objective of this study is to check the ability of the Moroccan TRIGA MARK II research reactor, designed to use natural convection cooling, to operate at its nominal power (2 MW) with sufficient safety margins. The neutronic analysis of the core has been performed using Leopard and Mcrac codes and the parameters of interest were the power distributions, the power peaking factors and the core excess reactivity. The thermal hydraulic analysis of the TRIGA core was performed using the French code FLICA designed for transient and study state situations. The main safety related parameters of the core have been evaluated with special emphasises on the following: maximum fuel temperature, minimum DNBR and maximum void fraction. The obtained results confirm the designer predictions except for the void fraction.

  12. The ΣΣ secondary intermediate-energy standard neutron field development at the Romania TRIGA Reactor

    Science.gov (United States)

    Roth, C.; Gârlea, I.; Dobrea, D.; Aioanei, L.; Kelerman, C.; Gârlea, C.; Gugiu, D.; Datcu, A.; Preda, M.; Pavelescu, M.

    2004-04-01

    The ΣΣ intermediate-energy reference spectrum irradiation facility, operated until 1998 at the VVR-S Reactor from Bucharest, was put into operation at the Romania TRIGA Reactor. This paper presents the experimental devices developed for the ΣΣ system operating at the Steady State Reactor (SSR)-TRIGA core, including the monitoring system, and preliminary neutron characterization results. These results show that the spectrum characteristics are slowly deviating from those for the recommended ΣΣ spectrum. The high-energy neutron tail is slowly increasing, compared with the recommended ΣΣ spectrum and other similar facilities.

  13. Validation of neutron flux redistribution factors in JSI TRIGA reactor due to control rod movements.

    Science.gov (United States)

    Kaiba, Tanja; Žerovnik, Gašper; Jazbec, Anže; Štancar, Žiga; Barbot, Loïc; Fourmentel, Damien; Snoj, Luka

    2015-10-01

    For efficient utilization of research reactors, such as TRIGA Mark II reactor in Ljubljana, it is important to know neutron flux distribution in the reactor as accurately as possible. The focus of this study is on the neutron flux redistributions due to control rod movements. For analyzing neutron flux redistributions, Monte Carlo calculations of fission rate distributions with the JSI TRIGA reactor model at different control rod configurations have been performed. Sensitivity of the detector response due to control rod movement have been studied. Optimal radial and axial positions of the detector have been determined. Measurements of the axial neutron flux distribution using the CEA manufactured fission chambers have been performed. The experiments at different control rod positions were conducted and compared with the MCNP calculations for a fixed detector axial position. In the future, simultaneous on-line measurements with multiple fission chambers will be performed inside the reactor core for a more accurate on-line power monitoring system. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Validation of the neutron and gamma fields in the JSI TRIGA reactor using in-core fission and ionization chambers.

    Science.gov (United States)

    Žerovnik, Gašper; Kaiba, Tanja; Radulović, Vladimir; Jazbec, Anže; Rupnik, Sebastjan; Barbot, Loïc; Fourmentel, Damien; Snoj, Luka

    2015-02-01

    CEA developed fission chambers and ionization chambers were utilized at the JSI TRIGA reactor to measure neutron and gamma fields. The measured axial fission rate distributions in the reactor core are generally in good agreement with the calculated values using the Monte Carlo model of the reactor thus verifying both the computational model and the fission chambers. In future, multiple absolutely calibrated fission chambers could be used for more accurate online reactor thermal power monitoring. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Production and release rate of 37Ar from the UT TRIGA Mark-II research reactor.

    Science.gov (United States)

    Johnson, Christine; Biegalski, Steven R; Artnak, Edward J; Moll, Ethan; Haas, Derek A; Lowrey, Justin D; Aalseth, Craig E; Seifert, Allen; Mace, Emily K; Woods, Vincent T; Humble, Paul

    2017-02-01

    Air samples were taken at various locations around The University of Texas at Austin's TRIGA Mark II research reactor and analyzed to determine the concentrations of 37Ar, 41Ar, and 133Xe present. The measured ratio of 37Ar/41Ar and historical records of 41Ar releases were then utilized to estimate an annual average release rate of 37Ar from the reactor facility. Using the calculated release rate, atmospheric transport modeling was performed in order to determine the potential impact of research reactor operations on nearby treaty verification activities. Results suggest that small research reactors (∼1 MWt) do not release 37Ar in concentrations measurable by currently proposed OSI detection equipment. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Simulation of a TRIGA Reactor Core Blockage Using RELAP5 Code

    Directory of Open Access Journals (Sweden)

    Patrícia A. L. Reis

    2015-01-01

    Full Text Available Cases of core coolant flow blockage transient have been simulated and analysed for the TRIGA IPR-R1 research reactor using the RELAP5-MOD3.3 code. The transients are related to partial and to total obstruction of the core coolant channels. The reactor behaviour after the loss of flow was analysed as well as the changes in the coolant and fuel temperatures. The behaviour of the thermal hydraulic parameters from the transient simulations was analysed. For a partial blockage, it was observed that the reactor reaches a new steady state operation with new values for the thermal hydraulic parameters. The total core blockage brings the reactor to an abnormal operation causing increase in core temperature.

  17. Experimental research in neutron physic and thermal-hydraulic at the CDTN Triga reactor

    Energy Technology Data Exchange (ETDEWEB)

    Mesquita, Amir Z.; Souza, Rose Mary G.P.; Ferreira, Andrea V.; Pinto, Antonio J.; Costa, Antonio C.L.; Rezende, Hugo C., E-mail: amir@cdtn.b, E-mail: souzarm@cdtn.b, E-mail: avf@cdtn.b, E-mail: ajp@cdtn.b, E-mail: aclc@cdtn.b, E-mail: hcr@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2011-07-01

    The IPR-R1 TRIGA (Training, Research, Isotopes production, General Atomics) at Nuclear Technology Development Center (CDTN) is a pool type reactor cooled by natural circulation of light water and an open surface. TRIGA reactors, developed by General Atomics (GA), are the most widely used research reactor in the world and characterized by inherent safety. The IPR-R1 is the only Brazilian nuclear research reactor available and able to perform experiments in which interaction between neutronic and thermal-hydraulic areas occurs. The IPR-R1 has started up on November 11th, 1960. At that time the maximum thermal power was 30 kW. The present forced cooling system was built in the 70th and the power was upgraded to 100 kW. Recently the core configuration and instrumentation was upgraded again to 250 kW at steady state, and is awaiting the license of CNEN to operate definitely at this new power. This paper describes the experimental research project carried out in the IPR-R1 reactor that has as objective evaluate the behaviour of the reactor operational parameters, and mainly to investigate the influence of temperature on the neutronic variables. The research was supported by Research Support Foundation of the State of Minas Gerais (FAPEMIG) and Brazilian Council for Scientific and Technological Development (CNPq). The research project meets the recommendations of the IAEA, for safety, modernization and development of strategic plan for research reactors utilization. This work is in line with the strategic objectives of Brazil, which aims to design and construct the Brazilian Multipurpose research Reactor (RMB). (author)

  18. The Boron Neutron Capture Therapy (BNCT) Project at the TRIGA Reactor in Mainz, Germany

    DEFF Research Database (Denmark)

    Hampel, G.; Grunewald, C.; Schütz, C.

    2011-01-01

    The thermal column of the TRIGA reactor in Mainz is being used very effectively for medical and biological applications. The BNCT (boron neutron capture therapy) project at the University of Mainz is focussed on the treatment of liver tumours, similar to the work performed at Pavia (Italy) a few ...... have also been initiated to investigate radiobiological effects of radiation generated during BNCT. For both experiments and treatment, a reliable dosimetry system is necessary. From work elsewhere, the use of alanine detectors appear to be an appropriate dosimetry technique....

  19. Analysis of JSI TRIGA MARK II reactor physical parameters calculated with TRIPOLI and MCNP.

    Science.gov (United States)

    Henry, R; Tiselj, I; Snoj, L

    2015-03-01

    New computational model of the JSI TRIGA Mark II research reactor was built for TRIPOLI computer code and compared with existing MCNP code model. The same modelling assumptions were used in order to check the differences of the mathematical models of both Monte Carlo codes. Differences between the TRIPOLI and MCNP predictions of keff were up to 100pcm. Further validation was performed with analyses of the normalized reaction rates and computations of kinetic parameters for various core configurations. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. Modification of the radial beam port of ITU TRIGA Mark II research reactor for BNCT applications.

    Science.gov (United States)

    Akan, Zafer; Türkmen, Mehmet; Çakir, Tahir; Reyhancan, İskender A; Çolak, Üner; Okka, Muhittin; Kiziltaş, Sahip

    2015-05-01

    This paper aims to describe the modification of the radial beam port of ITU (İstanbul Technical University) TRIGA Mark II research reactor for BNCT applications. Radial beam port is modified with Polyethylene and Cerrobend collimators. Neutron flux values are measured by neutron activation analysis (Au-Cd foils). Experimental results are verified with Monte Carlo results. The results of neutron/photon spectrum, thermal/epithermal neutron flux, fast group photon fluence and change of the neutron fluxes with the beam port length are presented. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. Production and use of {sup 18}F by TRIGA nuclear reactor: a first report

    Energy Technology Data Exchange (ETDEWEB)

    Burgio, N.; Ciavola, C.; Festinesi, A.; Capannesi, G. [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dipt. Innovazione

    1999-02-01

    The irradiation and radiochemical facilities at public research centre can contribute to the start up of the regional PET centre. In particular, the TRIGA reactor of Casaccia Research Centre could produce a sufficient amount of {sup 18}F to start up a PET centre and successively integrated the cyclotron production. This report establishes, in the light of the preliminary experimental works, a guideline to the reactor`s production and extraction of {sup 18}F in a convenient form for the synthesis of the most representative PET radiopharmaceutical: {sup 18}F-FDG. [Italiano] Le facilities di irraggiamento e i laboratori Radiochimici dei Centri Statali di Ricerca possono contribuire allo sviluppo di centri regionali PET (Tomografia ed Emissione Positronica). In particolare, il reattore TRIGA del Centro Ricerca Casaccia potrebbe produrre un quantitativo di {sup 18}F sufficiente alle attivita` formative propedeutiche al centro PET che, successivamente sarebbe in grado di avviare una propria produzione da ciclotrone. Questo rapporto stabilisce le linee guida sperimentali per la produzione del {sup 18}F da reattore nucleare e la sua successiva estrazione in una forma conveniente per la sintesi del piu` rappresentativo dei radiofarmaci PET: il {sup 18}F-FDG.

  2. Thermal Hydraulic Analysis of 3 MW TRIGA Research Reactor of Bangladesh Considering Different Cycles of Burnup

    Directory of Open Access Journals (Sweden)

    M.H. Altaf

    2014-12-01

    Full Text Available Burnup dependent steady state thermal hydraulic analysis of TRIGA Mark-II research reactor has been carried out utilizing coupled point kinetics, neutronics and thermal hydraulics code EUREKA-2/RR. From the previous calculations of neutronics parameters including percentage burnup of individual fuel elements performed so far for 700 MWD burnt core of TRIGA reactor showed that the fuel rod predicted as hottest at the beginning of cycle (fresh core was found to remain as the hottest until 200 MWD of burn, but, with the progress of core burn, the hottest rod was found to be shifted and another rod in the core became the hottest. The present study intends to evaluate the thermal hydraulic parameters of these hottest fuel rods at different cycles of burnup, from beginning to 700 MWD core burnt considering reactor operates under steady state condition. Peak fuel centerline temperature, maximum cladding and coolant temperatures of the hottest channels were calculated. It revealed that maximum temperature reported for fuel clad and fuel centerline found to lie below their melting points which indicate that there is no chance of burnout on the fuel cladding surface and no blister in the fuel meat throughout the considered cycles of core burnt.

  3. Sensitivity Analysis of the TRIGA IPR-R1 Reactor Models Using the MCNP Code

    Directory of Open Access Journals (Sweden)

    C. A. M. Silva

    2014-01-01

    Full Text Available In the process of verification and validation of code modelling, the sensitivity analysis including systematic variations in code input variables must be used to help identifying the relevant parameters necessary for a determined type of analysis. The aim of this work is to identify how much the code results are affected by two different types of the TRIGA IPR-R1 reactor modelling processes performed using the MCNP (Monte Carlo N-Particle Transport code. The sensitivity analyses included small differences of the core and the rods dimensions and different levels of model detailing. Four models were simulated and neutronic parameters such as effective multiplication factor (keff, reactivity (ρ, and thermal and total neutron flux in central thimble in some different conditions of the reactor operation were analysed. The simulated models presented good agreement between them, as well as in comparison with available experimental data. In this way, the sensitivity analyses demonstrated that simulations of the TRIGA IPR-R1 reactor can be performed using any one of the four investigated MCNP models to obtain the referenced neutronic parameters.

  4. Modernization of the facilities of the TRIGA Mark III reactor of ININ; Modernizacion de las instalaciones del reactor TRIGA Mark III del ININ

    Energy Technology Data Exchange (ETDEWEB)

    Mendez T, D.; Flores C, J., E-mail: dario.mendez@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2016-09-15

    The TRIGA Mark III reactor of the Instituto Nacional de Investigaciones Nucleares (ININ) has been in operation since 1968 under strict maintenance and component replacement programs, which has allowed its safe operation during this time. Under this scheme, the reactor was operating under suitable conditions, taking into account the different requests for operation that were received for the samples irradiation for the radioisotopes production such as the Sm-153, personnel training, basic research, archaeology and environmental studies and nuclear chemistry of the elements. However, a modernization program of its components and laboratories was required, in order to improve safety in the operation of the same and to increase its use in the analysis of samples by neutron activation and in the training of personnel. This program known as Modernization Program of the Reactor Facilities, was proposed alongside the project to replace high-enrichment fuels with low-enrichment fuels at the end of 2011 and early 2012. The central aspects of this program are described in this work, grouped into generic topics that include instrumentation and control, the radiological monitoring system of the area, the cooling system, the ventilation system, the neutron activation analysis laboratory, the manufacture of graphite elements, inspection submersible system of the pool, temporary storage system for irradiated fuels, traveling crane, Reactor support laboratories and technical meetings, courses and seminars for reactor personnel and associated groups. It also describes some of the most relevant components required for each system and the progress that is made in each one of them. As a fundamental result of the implementation of this Modernization Program of the Reactor Facilities, there has been a substantial improvement in the performance of the systems and components of its facilities, in the reliability of its operation and in the safety of the same. (Author)

  5. Adaptive fuzzy control of neutron power of the TRIGA Mark III reactor; Control difuso adaptable de la potencia neutronica del reactor Triga Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Rojas R, E.

    2014-07-01

    The design and implementation of an identification and control scheme of the TRIGA Mark III research nuclear reactor of the Instituto Nacional de Investigaciones Nucleares (ININ) of Mexico is presented in this thesis work. The identification of the reactor dynamics is carried out using fuzzy logic based systems, in which a learning process permits the adjustment of the membership function parameters by means of techniques based on neural networks and bio-inspired algorithms. The resulting identification system is a useful tool that allows the emulation of the reactor power behavior when different types of insertions of reactivity are applied into the core. The identification of the power can also be used for the tuning of the parameters of a control system. On the other hand, the regulation of the reactor power is carried out by means of an adaptive and stable fuzzy control scheme. The control law is derived using the input-output linearization technique, which permits the introduction of a desired power profile for the plant to follow asymptotically. This characteristic is suitable for managing the ascent of power from an initial level n{sub o} up to a predetermined final level n{sub f}. During the increase of power, a constraint related to the rate of change in power is considered by the control scheme, thus minimizing the occurrence of a safety reactor shutdown due to a low reactor period value. Furthermore, the theory of stability in the sense of Lyapunov is used to obtain a supervisory control law which maintains the power error within a tolerance region, thus guaranteeing the stability of the power of the closed loop system. (Author)

  6. Design and Implementation of a Fuzzy Controller for a TRIGA Mark III Reactor

    Directory of Open Access Journals (Sweden)

    Tonatiuh Rivero-Gutiérrez

    2012-01-01

    Full Text Available The design and testing of a fuzzy rule based controller to regulate the power of a TRIGA Mark III research nuclear reactor are presented. The design does not require the current exact parameters of the point kinetic equations of the reactor. Instead, from a qualitative analysis of the actions taken by the operators during the reactor’s operation, a set of control rules is derived. The rules cover the operation of the reactor from low levels of about dozens of watts up to its full power level of one megawatt. The controller is able to increase power from different initial values to a wide range of desired levels, maintaining constant levels for long periods of time. The controller’s output is the external reactivity, which is further converted to a control rod incremental movement. The fuzzy controller is implemented on the reactor’s digital operating console, and the results of a series of experiments are discussed.

  7. Neutron spectra at two beam ports of a TRIGA Mark III reactor loaded with HEU fuel.

    Science.gov (United States)

    Vega-Carrillo, H R; Hernández-Dávila, V M; Aguilar, F; Paredes, L; Rivera, T

    2014-01-01

    The neutron spectra have been measured in two beam ports, one radial and another tangential, of the TRIGA Mark III nuclear reactor from the National Institute of Nuclear Research in Mexico. Measurements were carried out with the reactor core loaded with high enriched uranium fuel. Two reactor powers, 5 and 10 W, were used during neutron spectra measurements using a Bonner sphere spectrometer with a (6)LiI(Eu) scintillator and 2, 3, 5, 8, 10 and 12 in.-diameter high-density polyethylene spheres. The neutron spectra were unfolded using the NSDUAZ unfolding code. For each spectrum total flux, mean energy and ambient dose equivalent were determined. Measured spectra show fission, epithermal and thermal neutrons, being harder in the radial beam port. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. Proposed design for the PGAA facility at the TRIGA IPR-R1 research reactor.

    Science.gov (United States)

    Guerra, Bruno T; Jacimovic, Radojko; Menezes, Maria Angela Bc; Leal, Alexandre S

    2013-01-01

    This work presents an initial proposed design of a Prompt Gamma Activation Analysis (PGAA) facility to be installed at the TRIGA IPR-R1, a 60 years old research reactor of the Centre of Development of Nuclear Technology (CDTN) in Brazil. The basic characteristics of the facility and the results of the neutron flux are presented and discussed. The proposed design is based on a quasi vertical tube as a neutron guide from the reactor core, inside the reactor pool, 6 m below the room's level where shall be located the rack containing the set sample/detector/shielding. The evaluation of the thermal and epithermal neutron flux in the sample position was done considering the experimental data obtained from a vertical neutron guide, already existent in the reactor, and the simulated model for the facility. The experimental determination of the neutron flux was obtained through the standard procedure of using Au monitors in different positions of the vertical tube. In order to validate both, this experiment and calculations of the simulated model, the flux was also determined in different positions in the core used for sample irradiation. The model of the system was developed using the Monte Carlo code MCNP5. The preliminary results suggest the possibility of obtaining a beam with minimum thermal flux of magnitude 10(6) cm(-2) s(-1), which confirm the technical feasibility of the installation of PGAA at the TRIGA IPR-R1 reactor. This beam would open new possibilities for enhancing the applications using the reactor.

  9. Validation of WIMS-SNAP code systems for calculations in TRIGA-MARK II type reactors; Validacion del sistema de codigos WIMS-SNAP para calculos en reactores nucleares tipo TRIGA-MARK II

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez Valle, S.; Lopez Aldama, D. [Centro de Investigaciones Nucleares, Tecnologicas y Ambientales, La Habana (Cuba). E-mail: svalle@ctn.isctn.edu.cu

    2000-07-01

    The following paper contributes to validate the Nuclear Engineering Department methods to carry out calculations in TRIGA reactors solving a Benchmark. The benchmark is analyzed with the WIMS-D/4-SNAP/3D code system and using the cross section library WIMS-TRIGA. A brief description of the DSN method is presented used in WIMS/d{sup 4} code and also the SNAP-3d code is shortly explained. The results are presented and compared with the experimental values. In other hand the possible error sources are analyzed. (author)

  10. Activation calculation of steel of the control rods of TRIGA Mark III reactor; Calculo de activacion del acero de las barras de control del reactor TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Garcia M, T.; Cruz G, H. S.; Ruiz C, M. A.; Angeles C, A., E-mail: teodoro.garcia@inin.gob.mx [ININ, Carretera Mexico-Toluca sn, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2014-10-15

    In the pool of TRIGA Mark III reactor of the Instituto Nacional de Investigaciones Nucleares (ININ), there are control rods that were removed from the core, and which are currently on shelves of decay. These rods were part of the reactor core when only had fuel standard (from 1968-1989). To conduct a proper activation analysis of the rods, is very important to have well-characterized the materials which are built, elemental composition of the same ones, the atomic densities and weight fractions of the elements that constitute them. To determine the neutron activation of the control rods MCNP5 code was used, this code allows us to have well characterized the radionuclides inventory that were formed during irradiation of the control rods. This work is limited to determining the activation of the steel that is part of the shielding of the control rods, the nuclear fuel that is in the fuel follower does not include. The calculation model of the code will be validated with experimental measurements and calculating the activity of fission products of the fuel follower which will take place at the end of 2014. (Author)

  11. Conceptual design of a clinical BNCT beam in an adjacent dry cell of the Jozef Stefan Institute TRIGA reactor

    NARCIS (Netherlands)

    Maucec, M

    2000-01-01

    The MCNP4B Monte Carlo transport code is used in a feasibility study of the epithermal neutron boron neutron capture therapy facility in the thermalizing column of the 250-kW TRIGA Mark II reactor at the Jozef Stefan Institute (JSI). To boost the epithermal neutron flux at the reference irradiation

  12. 77 FR 68155 - The Armed Forces Radiobiology Research Institute TRIGA Reactor: Facility Operating License No. R-84

    Science.gov (United States)

    2012-11-15

    ... COMMISSION The Armed Forces Radiobiology Research Institute TRIGA Reactor: Facility Operating License No. R... Operating License No. R-84 (Application), which currently authorizes the Armed Forces Radiobiology Research... the renewal of Facility Operating License No. R-84, which currently authorizes the licensee to operate...

  13. 77 FR 7613 - Dow Chemical Company; Dow Chemical TRIGA Research Reactor; Facility Operating License No. R-108

    Science.gov (United States)

    2012-02-13

    ... COMMISSION Dow Chemical Company; Dow Chemical TRIGA Research Reactor; Facility Operating License No. R-108... renewal of Facility Operating License No. R-108 (``Application''), which currently authorizes the Dow... Operating License No. R-108 for the DTRR. The application contains SUNSI. Based on its initial review of the...

  14. Verification of Monte Carlo calculations of the neutron flux in typical irradiation channels of the TRIGA reactor, Ljubljana

    NARCIS (Netherlands)

    Jacimovic, R; Maucec, M; Trkov, A

    2003-01-01

    An experimental verification of Monte Carlo neutron flux calculations in typical irradiation channels in the TRIGA Mark II reactor at the Jozef Stefan Institute is presented. It was found that the flux, as well as its spectral characteristics, depends rather strongly on the position of the

  15. Simulation on reactor TRIGA Puspati core kinetics fueled with thorium (Th) based fuel element

    Science.gov (United States)

    Mohammed, Abdul Aziz; Pauzi, Anas Muhamad; Rahman, Shaik Mohmmed Haikhal Abdul; Zin, Muhamad Rawi Muhammad; Jamro, Rafhayudi; Idris, Faridah Mohamad

    2016-01-01

    In confronting global energy requirement and the search for better technologies, there is a real case for widening the range of potential variations in the design of nuclear power plants. Smaller and simpler reactors are attractive, provided they can meet safety and security standards and non-proliferation issues. On fuel cycle aspect, thorium fuel cycles produce much less plutonium and other radioactive transuranic elements than uranium fuel cycles. Although not fissile itself, Th-232 will absorb slow neutrons to produce uranium-233 (233U), which is fissile. By introducing Thorium, the numbers of highly enriched uranium fuel element can be reduced while maintaining the core neutronic performance. This paper describes the core kinetic of a small research reactor core like TRIGA fueled with a Th filled fuel element matrix using a general purpose Monte Carlo N-Particle (MCNP) code.

  16. Experimental study of radiation dose rate at different strategic points of the BAEC TRIGA Research Reactor.

    Science.gov (United States)

    Ajijul Hoq, M; Malek Soner, M A; Salam, M A; Haque, M M; Khanom, Salma; Fahad, S M

    2017-12-01

    The 3MW TRIGA Mark-II Research Reactor of Bangladesh Atomic Energy Commission (BAEC) has been under operation for about thirty years since its commissioning at 1986. In accordance with the demand of fundamental nuclear research works, the reactor has to operate at different power levels by utilizing a number of experimental facilities. Regarding the enquiry for safety of reactor operating personnel and radiation workers, it is necessary to know the radiation level at different strategic points of the reactor where they are often worked. In the present study, neutron, beta and gamma radiation dose rate at different strategic points of the reactor facility with reactor power level of 2.4MW was measured to estimate the rising level of radiation due to its operational activities. From the obtained results high radiation dose is observed at the measurement position of the piercing beam port which is caused by neutron leakage and accordingly, dose rate at the stated position with different reactor power levels was measured. This study also deals with the gamma dose rate measurements at a fixed position of the reactor pool top surface for different reactor power levels under both Natural Convection Cooling Mode (NCCM) and Forced Convection Cooling Mode (FCCM). Results show that, radiation dose rate is higher for NCCM in compared with FCCM and increasing with the increase of reactor power. Thus, concerning the radiological safety issues for working personnel and the general public, the radiation dose level monitoring and the experimental analysis performed within this paper is so much effective and the result of this work can be utilized for base line data and code verification of the nuclear reactor. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Neutronic and thermal hydraulic analysis of the Geological Survey TRIGA Reactor

    Science.gov (United States)

    Shugart, Nicolas

    The United States Geological Survey TRIGA Reactor (GSTR) is a 1 MW reactor located in Lakewood, Colorado. In support of the GSTR's relicensing efforts, this project developed and validated a Monte Carlo N-Particle Version 5 (MCNP5) model of the GSTR reactor. The model provided estimates of the excess reactivity, power distribution and the fuel temperature, water temperature, void, and power reactivity coefficients for the current and limiting core. The MCNP5 model predicts a limiting core excess reactivity of 6.48 with a peak rod power of 22.2 kW. The fuel and void reactivity coefficients for the limiting core are strongly negative, and the core water reactivity coefficient is slightly positive, consistent with other TRIGA analyses. The average fuel temperature reactivity coefficient of the full power limiting core is -0.0135 /K while the average core void coefficient is -0.069 /K from 0-20 % void. The core water temperature reactivity coefficient is +0.012 /K. Following the neutronics analysis, the project developed RELAP5 and PARET-ANL models of the GSTR hot-rod fuel channel under steady state and transient conditions. The GSTR limiting core, determined as part of this analysis, provides a worst case operating scenario for the reactor. During steady state operations, the hot rod of the limiting core has a peak fuel temperature of 829 K and a minimum departure from nucleate boiling ratio of 2.16. After a $3.00 pulse reactivity insertion the fuel reaches a peak temperature is 1070 K. Examining the model results several seconds after a pulse reveals flow instabilities that result from weaknesses in the current two-channel model.

  18. Relative fission product yield determination in the USGS TRIGA Mark I reactor

    Science.gov (United States)

    Koehl, Michael A.

    Fission product yield data sets are one of the most important and fundamental compilations of basic information in the nuclear industry. This data has a wide range of applications which include nuclear fuel burnup and nonproliferation safeguards. Relative fission yields constitute a major fraction of the reported yield data and reduce the number of required absolute measurements. Radiochemical separations of fission products reduce interferences, facilitate the measurement of low level radionuclides, and are instrumental in the analysis of low-yielding symmetrical fission products. It is especially useful in the measurement of the valley nuclides and those on the extreme wings of the mass yield curve, including lanthanides, where absolute yields have high errors. This overall project was conducted in three stages: characterization of the neutron flux in irradiation positions within the U.S. Geological Survey TRIGA Mark I Reactor (GSTR), determining the mass attenuation coefficients of precipitates used in radiochemical separations, and measuring the relative fission products in the GSTR. Using the Westcott convention, the Westcott flux, modified spectral index, neutron temperature, and gold-based cadmium ratios were determined for various sampling positions in the USGS TRIGA Mark I reactor. The differential neutron energy spectrum measurement was obtained using the computer iterative code SAND-II-SNL. The mass attenuation coefficients for molecular precipitates were determined through experiment and compared to results using the EGS5 Monte Carlo computer code. Difficulties associated with sufficient production of fission product isotopes in research reactors limits the ability to complete a direct, experimental assessment of mass attenuation coefficients for these isotopes. Experimental attenuation coefficients of radioisotopes produced through neutron activation agree well with the EGS5 calculated results. This suggests mass attenuation coefficients of molecular

  19. Characterization and quantification of an in-core neutron irradiation facility at a TRIGA II research reactor

    Science.gov (United States)

    Aghara, Sukesh; Charlton, William

    2006-07-01

    Experiments have been performed to characterize the neutron environment at an in-core TRIGA type nuclear research reactor. Steady-state thermal and epithermal neutron environment testing is important for many applications including, materials, electronics and biological cells. A well characterized neutron environment at a research reactor, including energy spectrum and spatial distribution, can be useful to many research communities and for educational research. This paper describes the characterization process and an application of exposing electronics to high neutron fluence.

  20. Applicable regulations and development of surveillance experiments of criticality approach in the TRIGA III Mark reactor; Normativa aplicable y desarrollo de experimentos de vigilancia de aproximacion a criticidad en el reactor Triga Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez M, J.L.; Aguilar H, F.; Rivero G, T.; Sainz M, E. [Instituto nacional de Investigaciones Nucleares, Departamento de Automatizacion, A.P. 18-1027, Col. Escandon, 11801 Mexico D.F. (Mexico)

    2000-07-01

    In the procedure elaborated to repair the vessel of TRIGA III Mark reactor is required to move toward two tanks of temporal storage the fuel elements which are in operation and the spent fuel elements which are in decay inside the reactor pool. The National Commission of Nuclear Safety and Safeguards (CNSNS) has requested as protection measure that it is carried out a surveillance of the criticality approach of the temporal storages. This work determines the main regulation aspects that entails an experiment of criticality approach, moreover, informing about the results obtained in the developing of this experiments. The regulation aspects are not exclusives for this work in the TRIGA Mark III reactor but they also apply toward any assembling of fissile material. (Author)

  1. Long-lived activation products in TRIGA Mark II research reactor concrete shield: calculation and experiment

    Science.gov (United States)

    Žagar, Tomaž; Božič, Matjaž; Ravnik, Matjaž

    2004-12-01

    In this paper, a process of long-lived activity determination in research reactor concrete shielding is presented. The described process is a combination of experiment and calculations. Samples of original heavy reactor concrete containing mineral barite were irradiated inside the reactor shielding to measure its long-lived induced radioactivity. The most active long-lived (γ emitting) radioactive nuclides in the concrete were found to be 133Ba, 60Co and 152Eu. Neutron flux, activation rates and concrete activity were calculated for actual shield geometry for different irradiation and cooling times using TORT and ORIGEN codes. Experimental results of flux and activity measurements showed good agreement with the results of calculations. Volume of activated concrete waste after reactor decommissioning was estimated for particular case of Jožef Stefan Institute TRIGA reactor. It was observed that the clearance levels of some important long-lived isotopes typical for barite concrete (e.g. 133Ba, 41Ca) are not included in the IAEA and EU basic safety standards.

  2. Estimation of Na-24 activity concentration in BAEC TRIGA Research Reactor

    Science.gov (United States)

    Ajijul Hoq, M.; Malek Soner, M. A.; Salam, M. A.; Khanom, Salma; Fahad, S. M.

    The Bangladesh Atomic Energy Commission (BAEC) TRIGA Research Reactor is a unique nuclear installation of the country generally implemented for a wide variety of research applications and serves as an excellent source of neutron. During reactor operation it is necessary to measure and control the activity concentration of the pool water for fuel element failure detection and for the determination of contamination. The present study deals with the estimation of activity concentration for Na-24 present in water coolant produced as a result of 23Na (n, γ) 24Na reaction. Several governing equations have been employed to estimate the Na-24 activity concentrations theoretically at different reactor power levels including maximum reactor power of 2.4 MW. From the obtained result it is ensured that the estimated Na-24 activity of 8.83 × 10-3 μCi /cm3 is not significant enough for any radiological hazard. Thus for ensuring radiological safety issues of the research reactor the assessment performed under the present study has an implication.

  3. Immobilization of Ion Exchange radioactive resins of the TRIGA Mark III Nuclear Reactor; Inmovilizacion de resinas de intercambio ionico radiactivas del reactor nuclear TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Martinez, H

    1999-07-01

    In the last decades many countries in the world have taken interest in the use, availability, and final disposal of dangerous wastes in the environment, within these, those dangerous wastes that contain radioactive material. That is why studies have been made on materials used as immobilization agent of radioactive waste that may guarantee its storage for long periods of time under drastic conditions of humidity, temperature change and biodegradation. In mexico, the development of different applications of radioactive material in the industry, medicine and investigation, have generated radioactive waste, sealed and open sources, whose require a special technological development for its management and final disposal. The present work has as a finality to develop the process and define the agglutinating material, bitumen, cement and polyester resin that permits immobilization of resins of Ionic Exchange contaminated by Barium 153, Cesium 137, Europium 152, Cobalt 60 and Manganese 54 generated from the nuclear reactor TRIGA Mark III. Ionic interchange contaminated resin must be immobilized and is analysed under different established tests by the Mexican Official Standard NOM-019-NUCL-1995 {sup L}ow level radioactive wastes package requirements for its near-surface final disposal. Immobilization of ionic interchange contaminated resins must count with the International Standards applicable in this process; in these standards, the following test must be taken in prototype examples: Free-standing water, leachability, compressive strength, biodegradation, radiation stability, thermal stability and burning rate. (Author)

  4. University of Illinois nuclear pumped laser program. [experiments with a TRIGA pulsed reactor with a broad pulse and a low peak flux

    Science.gov (United States)

    Miley, G. H.

    1979-01-01

    The development of nuclear pumped lasers with improved efficiency, energy storage capability, and UF6 volume pumping is reviewed. Results of nuclear pumped laser experiments using a TRIGA-type pulsed reactor are outlined.

  5. Piping Flexibility Analysis of the Primary Cooling System of TRIGA 2000 Bandung Reactor due to Earthquake

    Directory of Open Access Journals (Sweden)

    H.P. Rahardjo

    2011-08-01

    Full Text Available Earthquakes in a nuclear installation can overload a piping system which is not flexible enough. These loads can be forces, moments and stresses working on the pipes or equipments. If the load is too large and exceed the allowable limits, the piping and equipment can be damaged and lead to overall system operation failure. The load received by piping systems can be reduced by making adequate piping flexibility, so all the loads can be transmitted homogenously throughout the pipe without load concentration at certain point. In this research the analysis of piping stress has been conducted to determine the size of loads that occured in the piping of primary cooling system of TRIGA 2000 Reactor, Bandung if an earthquake happened in the reactor site. The analysis was performed using Caesar II software-based finite element method. The ASME code B31.1 arranging the design of piping systems for power generating system (Power Piping Code was used as reference analysis method. Modeling of piping systems was based on the cooling piping that has already been installed and the existing data reported in Safety Analysis Reports (SARs of TRIGA 2000 reactor, Bandung. The quake considered in this analysis is the earthquake that occurred due to the Lembang fault, since it has the Peak Ground Acceleration (PGA in the Bandung TRIGA 2000 reactor site. The analysis results showed that in the static condition for sustain and expansion loads, the stress fraction in all piping lines does not exceed the allowable limit. However, during operation moment, in dynamic condition, the primary cooling system is less flexible at sustain load, ekspansi load, and combination load and the stress fraction have reached 95,5%. Therefore a pipeline modification (rerouting is needed to make pipe stress does not exceed the allowable stress. The pipeline modification was carried out by applied a gap of 3 mm in the X direction of the support at node 25 and eliminate the support at the node

  6. The characteristic assessment of spent ion exchange resin from PUSPATI TRIGA REACTOR (RTP) for immobilization process

    Energy Technology Data Exchange (ETDEWEB)

    Wahida, Nurul [School of Applied Physics, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia and Malaysian Nuclear Agency, Bangi 43000 Kajang, Selangor (Malaysia); Yasir, Muhamad Samudi; Majid, Amran Ab; Irwan, M. N. [School of Applied Physics, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor (Malaysia); Wahab, Mohd Abd; Marzukee, Nik; Paulus, Wilfred; Phillip, Esther; Thanaletchumy [Malaysian Nuclear Agency, Bangi 43000 Kajang, Selangor (Malaysia)

    2014-09-03

    In this paper, spent ion exchange resin generated from PUSPATI TRIGA reactor (RTP) in Malaysian Nuclear Agency were characterized based on the water content, radionuclide content and radionuclide leachability. The result revealed that the water content in the spent resin is 48%. Gamma spectrometry analysis indicated the presence of {sup 134}Cs, {sup 137}Cs, {sup 152}Eu, {sup 54}Mn, {sup 58}Co, {sup 60}Co and {sup 65}Zn. The leachability test shows a small concentrations (<1 Bq/l) of {sup 152}Eu and {sup 134}Cs were leached out from the spent resin while {sup 60}Co activity concentrations slightly exceeded the limit generally used for industrial wastewater i.e. 1 Bq/l. Characterization of spent ion exchange resin sampled from RTP show that this characterization is important as a basis to immobilize this radioactive waste using geopolymer technology.

  7. Operation and reactivity measurements of an accelerator driven subcritical TRIGA reactor

    Science.gov (United States)

    O'Kelly, David Sean

    Experiments were performed at the Nuclear Engineering Teaching Laboratory (NETL) in 2005 and 2006 in which a 20 MeV linear electron accelerator operating as a photoneutron source was coupled to the TRIGA (Training, Research, Isotope production, General Atomics) Mark II research reactor at the University of Texas at Austin (UT) to simulate the operation and characteristics of a full-scale accelerator driven subcritical system (ADSS). The experimental program provided a relatively low-cost substitute for the higher power and complexity of internationally proposed systems utilizing proton accelerators and spallation neutron sources for an advanced ADSS that may be used for the burning of high-level radioactive waste. Various instrumentation methods that permitted ADSS neutron flux monitoring in high gamma radiation fields were successfully explored and the data was used to evaluate the Stochastic Pulsed Feynman method for reactivity monitoring.

  8. The characteristic assessment of spent ion exchange resin from PUSPATI TRIGA REACTOR (RTP) for immobilization process

    Science.gov (United States)

    Wahida, Nurul; Yasir, Muhamad Samudi; Majid, Amran Ab; Wahab, Mohd Abd; Marzukee, Nik; Paulus, Wilfred; Phillip, Esther; Thanaletchumy, Irwan, M. N.

    2014-09-01

    In this paper, spent ion exchange resin generated from PUSPATI TRIGA reactor (RTP) in Malaysian Nuclear Agency were characterized based on the water content, radionuclide content and radionuclide leachability. The result revealed that the water content in the spent resin is 48%. Gamma spectrometry analysis indicated the presence of 134Cs, 137Cs, 152Eu, 54Mn, 58Co, 60Co and 65Zn. The leachability test shows a small concentrations (<1 Bq/l) of 152Eu and 134Cs were leached out from the spent resin while 60Co activity concentrations slightly exceeded the limit generally used for industrial wastewater i.e. 1 Bq/l. Characterization of spent ion exchange resin sampled from RTP show that this characterization is important as a basis to immobilize this radioactive waste using geopolymer technology.

  9. Verification of MCNP simulation of neutron flux parameters at TRIGA MK II reactor of Malaysia.

    Science.gov (United States)

    Yavar, A R; Khalafi, H; Kasesaz, Y; Sarmani, S; Yahaya, R; Wood, A K; Khoo, K S

    2012-10-01

    A 3-D model for 1 MW TRIGA Mark II research reactor was simulated. Neutron flux parameters were calculated using MCNP-4C code and were compared with experimental results obtained by k(0)-INAA and absolute method. The average values of φ(th),φ(epi), and φ(fast) by MCNP code were (2.19±0.03)×10(12) cm(-2)s(-1), (1.26±0.02)×10(11) cm(-2)s(-1) and (3.33±0.02)×10(10) cm(-2)s(-1), respectively. These average values were consistent with the experimental results obtained by k(0)-INAA. The findings show a good agreement between MCNP code results and experimental results. Copyright © 2012 Elsevier Ltd. All rights reserved.

  10. Determination of α and f parameters at the 14-MW TRIGA reactor at Pitesti, Romania

    Science.gov (United States)

    Bărbos, D.; Păunoiu, C.; Roth, C.

    2010-10-01

    For experimental α determination the two-monitor method has been applied to determine α parameter in the irradiation channels at TRIGA 14 MW reactor (SCN Pitesti). The modified two-monitor method by using Cd ratio measurements eliminates the introducing of systematic errors due to the inaccuracy of absolute nuclear data. This characterization of the epithermal neutron spectrum is used in the k0-method of NAA, implemented at the SCN Pitesti. Neutron spectrum parameters were determined in the inner irradiation channel XC-1 and for outer irradiation channels: Beryllium J-6, Beryllium J-7, and Beryllium K-11. For α and f parameter verification a standard reference material denominated ECRM379-1 was analyzed using k0 standardization.

  11. The Boron Neutron Capture Therapy (BNCT) Project at the TRIGA Reactor in Mainz, Germany

    Energy Technology Data Exchange (ETDEWEB)

    Hampel, G.; Grunewald, C.; Schutz, C.; Schmitz, T.; Kratz, J.V. [Nuclear Chemistry, University of Mainz, D-55099 Mainz (Germany); Brochhausen, C.; Kirkpatrick, J. [Department of Pathology, University of Mainz, D-55099 Mainz (Germany); Bortulussi, S.; Altieri, S. [Department of Nuclear and Theoretical Physics University of Pavia, Pavia (Italy); National Institute of Nuclear Physics (INFN) Pavia Section, Pavia (Italy); Kudejova, P. [Forschungs-Neutronenquelle Heinz Maier-Leibnitz (FRM II), Technische Universitaet Muenchen, D-85748 Garching (Germany); Appelman, K.; Moss, R. [Joint Research Centre (JRC) of the European Commission, NL-1755 ZG Petten (Netherlands); Bassler, N. [University of Aarhus, Norde Ringade, DK-8000, Aarhus C (Denmark); Blaickner, M.; Ziegner, M. [Molecular Medicine, Health and Environment Department, AIT Austrian Institute of Technology GmbH (Austria); Sharpe, P.; Palmans, H. [National Physical Laboratory, Teddington TW11 0LW, Middlesex (United Kingdom); Otto, G. [Department of Hepatobiliary, Pancreatic and Transplantation Surgery, University of Mainz, D-55099 Mainz (Germany)

    2011-07-01

    The thermal column of the TRIGA reactor in Mainz is being used very effectively for medical and biological applications. The BNCT (boron neutron capture therapy) project at the University of Mainz is focussed on the treatment of liver tumours, similar to the work performed in Pavia (Italy) a few years ago, where patients with liver metastases were treated by combining BNCT with auto-transplantation of the organ. Here, in Mainz, a preclinical trial has been started on patients suffering from liver metastases of colorectal carcinoma. In vitro experiments and the first animal tests have also been initiated to investigate radiobiological effects of radiation generated during BNCT. For both experiments and the treatment, a reliable dosimetry system is necessary. From work elsewhere, the use of alanine detectors appears to be an appropriate dosimetry technique. (author)

  12. Reaction Rate Benchmark Experiments with Miniature Fission Chambers at the Slovenian TRIGA Mark II Reactor

    Science.gov (United States)

    Štancar, Žiga; Kaiba, Tanja; Snoj, Luka; Barbot, Loïc; Destouches, Christophe; Fourmentel, Damien; Villard, Jean-François AD(; )

    2018-01-01

    A series of fission rate profile measurements with miniature fission chambers, developed by the Commisariat á l'énergie atomique et auxénergies alternatives, were performed at the Jožef Stefan Institute's TRIGA research reactor. Two types of fission chambers with different fissionable coating (235U and 238U) were used to perform axial fission rate profile measurements at various radial positions and several control rod configurations. The experimental campaign was supported by an extensive set of computations, based on a validated Monte Carlo computational model of the TRIGA reactor. The computing effort included neutron transport calculations to support the planning and design of the experiments as well as calculations to aid the evaluation of experimental and computational uncertainties and major biases. The evaluation of uncertainties was performed by employing various types of sensitivity analyses such as experimental parameter perturbation and core reaction rate gradient calculations. It has been found that the experimental uncertainty of the measurements is sufficiently low, i.e. the total relative fission rate uncertainty being approximately 5 %, in order for the experiments to serve as benchmark experiments for validation of fission rate profiles. The effect of the neutron flux redistribution due to the control rod movement was studied by performing measurements and calculations of fission rates and fission chamber responses in different axial and radial positions at different control rod configurations. It was confirmed that the control rod movement affects the position of the maximum in the axial fission rate distribution, as well as the height of the local maxima. The optimal detector position, in which the redistributions would have minimum effect on its signal, was determined.

  13. Neutron spectra in two beam ports of the TRIGA Mark III reactor

    Energy Technology Data Exchange (ETDEWEB)

    Vega C, H. R.; Hernandez D, V. M. [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98060 Zacatecas (Mexico); Aguilar, F.; Paredes, L. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Rivera M, T., E-mail: fermineutron@yahoo.com [IPN, Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Unidad Legaria, Av. Legaria 694, 11500 Mexico D. F. (Mexico)

    2013-10-15

    The neutron spectra have been measured in two beam ports, radial and tangential, of the TRIGA Mark III nuclear reactor from the National Institute of Nuclear Research. Measurements were carried out with the core with mixed fuel (Leu 8.5/20 and Flip Heu 8.5/70). Two reactor powers, 5 and 10 W, were used during neutron spectra measurements using a Bonner sphere spectrometer with a {sup 6}Lil(Eu) scintillator and 2, 3, 5, 8, 10 and 12 inches-diameter high density polyethylene spheres. The neutron spectra were unfolded using the NSDUAZ unfolding code; from each spectrum the total neutron flux, the neutron mean energy and the neutron ambient dose equivalent dose were determined. Measured spectra show fission (E≥ 0.1 MeV), epithermal (from 0.4 eV up to 0.1 MeV) and thermal neutrons (E≤ 0.4 eV). For both reactor powers the spectra in the radial beam port have similar features which are different to the neutron spectrum characteristics in the tangential beam port. (Author)

  14. Neutron detection of the Triga Mark III reactor, using nuclear track methodology

    Energy Technology Data Exchange (ETDEWEB)

    Espinosa, G., E-mail: espinosa@fisica.unam.mx; Golzarri, J. I. [Instituto de Física, Universidad Nacional Autónoma de México Circuito de la Investigación Científica, Ciudad Universitaria. México, DF (Mexico); Raya-Arredondo, R.; Cruz-Galindo, S. [Instituto Nacional de Investigaciones Nucleares (Mexico); Sajo-Bohus, L. [Universidad Simón Bolivar, Laboratorio de Física Nuclear, Caracas (Venezuela, Bolivarian Republic of)

    2015-07-23

    Nuclear Track Methodology (NTM), based on the neutron-proton interaction is one often employed alternative for neutron detection. In this paper we apply NTM to determine the Triga Mark III reactor operating power and neutron flux. The facility nuclear core, loaded with 85 Highly Enriched Uranium as fuel with control rods in a demineralized water pool, provide a neutron flux around 2 × 10{sup 12} n cm{sup −2} s{sup −1}, at the irradiation channel TO-2. The neutron field is measured at this channel, using Landauer{sup ®} PADC as neutron detection material, covered by 3 mm Plexiglas{sup ®} as converter. After exposure, plastic detectors were chemically etched to make observable the formed latent tracks induced by proton recoils. The track density was determined by a custom made Digital Image Analysis System. The resulting average nuclear track density shows a direct proportionality response for reactor power in the range 0.1-7 kW. We indicate several advantages of the technique including the possibility to calibrate the neutron flux density measured at low reactor power.

  15. Testing the applicability of the k0-NAA method at the MINT's TRIGA MARK II reactor

    Science.gov (United States)

    Siong, Wee Boon; Dung, Ho Manh; Wood, Ab. Khalik; Salim, Nazaratul Ashifa Abd.; Elias, Md. Suhaimi

    2006-08-01

    The Analytical Chemistry Laboratory at MINT is using the NAA technique since 1980s and is the only laboratory in Malaysia equipped with a research reactor, namely the TRIGA MARK II. Throughout the years the development of NAA technique has been very encouraging and was made applicable to a wide range of samples. At present, the k0 method has become the preferred standardization method of NAA ( k0-NAA) due to its multi-elemental analysis capability without using standards. Additionally, the k0 method describes NAA in physically and mathematically understandable definitions and is very suitable for computer evaluation. Eventually, the k0-NAA method has been adopted by MINT in 2003, in collaboration with the Nuclear Research Institute (NRI), Vietnam. The reactor neutron parameters ( α and f) for the pneumatic transfer system and for the rotary rack at various locations, as well as the detector efficiencies were determined. After calibration of the reactor and the detectors, the implemented k0 method was validated by analyzing some certified reference materials (including IAEA Soil 7, NIST 1633a, NIST 1632c, NIST 1646a and IAEA 140/TM). The analysis results of the CRMs showed an average u score well below the threshold value of 2 with a precision of better than ±10% for most of the elemental concentrations obtained, validating herewith the introduction of the k0-NAA method at the MINT.

  16. Computational analysis of the dose rates at JSI TRIGA reactor irradiation facilities.

    Science.gov (United States)

    Ambrožič, K; Žerovnik, G; Snoj, L

    2017-12-01

    The JSI TRIGA Mark II, IJS research reactor is equipped with numerous irradiation positions, where samples can be irradiated by neutrons and γ-rays. Irradiation position selection is based on its properties, such as physical size and accessibility, as well as neutron and γ-ray spectra, flux and dose intensities. This paper presents an overview on the neutron and γ-ray fluxes, spectra and dose intensities calculations using Monte Carlo MCNP software and ENDF/B-VII.0 nuclear data libraries. The dose-rates are presented in terms of ambient dose equivalents, air kerma, and silicon dose equivalent. At full reactor power the neutron ambient dose equivalent ranges from 5.5×103Svh-1 to 6×106Svh-1, silicon dose equivalent from 6×102Gy/hsi to 3×105Gy/hsi, and neutron air kerma from 4.3×103Gyh-1 to 2×105Gyh-1. Ratio of fast (1MeVreactor power from 3.4×103Svh-1 to 3.6×105Svh-1 and γ air kerma range 3.1×103Gyh-1 to 2.9×105Gyh-1. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Extraction of pure thermal neutron beam for the proposed PGNAA facility at the TRIGA research reactor of AERE, Savar, Bangladesh

    Science.gov (United States)

    Alam, Sabina; Zaman, M. A.; Islam, S. M. A.; Ahsan, M. H.

    1993-10-01

    A study on collimators and filters for the design of a spectrometer for prompt gamma neutron activation analysis (PGNAA) at one of the radial beamports of the TRIGA Mark II reactor at AERE, Savar has been carried out. On the basis of this study a collimator and a filter have been designed for the proposed PGNAA facility. Calculations have been done for measuring neutron flux at various positions of the core of the reactor using the computer code TRIGAP. Gamma dose in the core of the reactor has also been measured experimentally using TLD technique in the present work.

  18. Neutronic tests and reactivity balance in the IPR-R1 TRIGA reactor

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Rose Mary Gomes do Prado; Souza, Luiz Claudio Andrade, E-mail: souzarm@cdtn.br, E-mail: lcas@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2015-07-01

    This paper presents the 2014 neutronic tests performed on CDTN's TRIGA IPR-R1 research reactor. Such tests are performed annually, as prescribed by the Safety Analysis Report. The three control rods, Regulating, Shim and Safety, were calibrated and their worth determined to be 0.52 $, 3.08 $ and 2.78 $, respectively. The Shim rod takes 0.44 s to shutdown the reactor and the Safety rod 0.48 s. The maximum reactivity insertion rates are 48 pcm/s by the Shim rod and 46 pcm/s by the Safety rod. Total reactivity excess is 1.88 $. The temperature reactivity coefficient determined is -0.94 cent/deg C. A reactivity insertion of 0.71 $ is necessary in order to achieve the licensed maximum reactor power of 100 kW. Reactivity losses due to xenon poisoning, after operating for 8 h at maximum power, is 0.20 $, and the insertion of a void tube in the Central Thimble corresponds to 0.22 $. A significant amount of reactivity is required to overcome the temperature effect and allow the reactor to operate at full power for extended periods of time. Given all these reactivity losses, a new fuel element should soon be added to the core in order to increase the reactivity excess. Adding this new fuel element to the C ring and moving the element withdrawn from that position to the F ring, replacing a graphite dummy element, would increase 45.5 cents in the reactivity excess worth. Calculations and experimental results will be used to optimize a new core configuration for the reactor. (author)

  19. Design of sample carrier for neutron irradiation facility at TRIGA MARK II nuclear reactor

    Science.gov (United States)

    Abdullah, Y.; Hamid, N. A.; Mansor, M. A.; Ahmad, M. H. A. R. M.; Yusof, M. R.; Yazid, H.; Mohamed, A. A.

    2013-06-01

    The objective of this work is to design a sample carrier for neutron irradiation experiment at beam ports of research nuclear reactor, the Reaktor TRIGA PUSPATI (RTP). The sample carrier was designed so that irradiation experiment can be performed safely by researchers. This development will resolve the transferring of sample issues faced by the researchers at the facility when performing neutron irradiation studies. The function of sample carrier is to ensure the sample for the irradiation process can be transferred into and out from the beam port of the reactor safely and effectively. The design model used was House of Quality Method (HOQ) which is usually used for developing specifications for product and develop numerical target to work towards and determining how well we can meet up to the needs. The chosen sample carrier (product) consists of cylindrical casing shape with hydraulic cylinders transportation method. The sample placing can be done manually, locomotion was by wheel while shielding used was made of boron materials. The sample carrier design can shield thermal neutron during irradiation of sample so that only low fluencies fast neutron irradiates the sample.

  20. Assessment and mitigation of power quality problems for PUSPATI TRIGA Reactor (RTP)

    Science.gov (United States)

    Zakaria, Mohd Fazli; Ramachandaramurthy, Vigna K.

    2017-01-01

    An electrical power systems are exposed to different types of power quality disturbances. Investigation and monitoring of power quality are necessary to maintain accurate operation of sensitive equipment especially for nuclear installations. This paper will discuss the power quality problems observed at the electrical sources of PUSPATI TRIGA Reactor (RTP). Assessment of power quality requires the identification of any anomalous behavior on a power system, which adversely affects the normal operation of electrical or electronic equipment. A power quality assessment involves gathering data resources; analyzing the data (with reference to power quality standards) then, if problems exist, recommendation of mitigation techniques must be considered. Field power quality data is collected by power quality recorder and analyzed with reference to power quality standards. Normally the electrical power is supplied to the RTP via two sources in order to keep a good reliability where each of them is designed to carry the full load. The assessment of power quality during reactor operation was performed for both electrical sources. There were several disturbances such as voltage harmonics and flicker that exceeded the thresholds. To reduce these disturbances, mitigation techniques have been proposed, such as to install passive harmonic filters to reduce harmonic distortion, dynamic voltage restorer (DVR) to reduce voltage disturbances and isolate all sensitive and critical loads.

  1. Confirmation of a realistic reactor model for BNCT dosimetry at the TRIGA Mainz.

    Science.gov (United States)

    Ziegner, Markus; Schmitz, Tobias; Khan, Rustam; Blaickner, Matthias; Palmans, Hugo; Sharpe, Peter; Hampel, Gabriele; Böck, Helmuth

    2014-11-01

    In order to build up a reliable dose monitoring system for boron neutron capture therapy (BNCT) applications at the TRIGA reactor in Mainz, a computer model for the entire reactor was established, simulating the radiation field by means of the Monte Carlo method. The impact of different source definition techniques was compared and the model was validated by experimental fluence and dose determinations. The depletion calculation code origen2 was used to compute the burn-up and relevant material composition of each burned fuel element from the day of first reactor operation to its current core. The material composition of the current core was used in a mcnp5 model of the initial core developed earlier. To perform calculations for the region outside the reactor core, the model was expanded to include the thermal column and compared with the previously established attila model. Subsequently, the computational model is simplified in order to reduce the calculation time. Both simulation models are validated by experiments with different setups using alanine dosimetry and gold activation measurements with two different types of phantoms. The mcnp5 simulated neutron spectrum and source strength are found to be in good agreement with the previous attila model whereas the photon production is much lower. Both mcnp5 simulation models predict all experimental dose values with an accuracy of about 5%. The simulations reveal that a Teflon environment favorably reduces the gamma dose component as compared to a polymethyl methacrylate phantom. A computer model for BNCT dosimetry was established, allowing the prediction of dosimetric quantities without further calibration and within a reasonable computation time for clinical applications. The good agreement between the mcnp5 simulations and experiments demonstrates that the attila model overestimates the gamma dose contribution. The detailed model can be used for the planning of structural modifications in the thermal column

  2. Confirmation of a realistic reactor model for BNCT dosimetry at the TRIGA Mainz

    Energy Technology Data Exchange (ETDEWEB)

    Ziegner, Markus, E-mail: Markus.Ziegner.fl@ait.ac.at [AIT Austrian Institute of Technology GmbH, Vienna A-1220, Austria and Institute of Atomic and Subatomic Physics, Vienna University of Technology, Vienna A-1020 (Austria); Schmitz, Tobias; Hampel, Gabriele [Institut für Kernchemie, Johannes Gutenberg-Universität, Mainz DE-55128 (Germany); Khan, Rustam [Pakistan Institute of Engineering and Applied Sciences (PIEAS), Islamabad PK-44000 (Pakistan); Blaickner, Matthias [AIT Austrian Institute of Technology GmbH, Vienna A-1220 (Austria); Palmans, Hugo [Acoustics and Ionising Radiation Division, National Physical Laboratory, Teddington TW11 0LW, United Kingdom and Medical Physics Group, EBG MedAustron GmbH, Wiener Neustadt A-2700 (Austria); Sharpe, Peter [Acoustics and Ionising Radiation Division, National Physical Laboratory, Teddington TW11 0LW (United Kingdom); Böck, Helmuth [Institute of Atomic and Subatomic Physics, Vienna University of Technology, Vienna A-1020 (Austria)

    2014-11-01

    Purpose: In order to build up a reliable dose monitoring system for boron neutron capture therapy (BNCT) applications at the TRIGA reactor in Mainz, a computer model for the entire reactor was established, simulating the radiation field by means of the Monte Carlo method. The impact of different source definition techniques was compared and the model was validated by experimental fluence and dose determinations. Methods: The depletion calculation code ORIGEN2 was used to compute the burn-up and relevant material composition of each burned fuel element from the day of first reactor operation to its current core. The material composition of the current core was used in a MCNP5 model of the initial core developed earlier. To perform calculations for the region outside the reactor core, the model was expanded to include the thermal column and compared with the previously established ATTILA model. Subsequently, the computational model is simplified in order to reduce the calculation time. Both simulation models are validated by experiments with different setups using alanine dosimetry and gold activation measurements with two different types of phantoms. Results: The MCNP5 simulated neutron spectrum and source strength are found to be in good agreement with the previous ATTILA model whereas the photon production is much lower. Both MCNP5 simulation models predict all experimental dose values with an accuracy of about 5%. The simulations reveal that a Teflon environment favorably reduces the gamma dose component as compared to a polymethyl methacrylate phantom. Conclusions: A computer model for BNCT dosimetry was established, allowing the prediction of dosimetric quantities without further calibration and within a reasonable computation time for clinical applications. The good agreement between the MCNP5 simulations and experiments demonstrates that the ATTILA model overestimates the gamma dose contribution. The detailed model can be used for the planning of structural

  3. Implementation of the k{sub 0} technique using multi-detectors on diverse irradiation facilities of TRIGA Reactor; Implementacion de la tecnica k{sub 0} usando multidetectores en diferentes instalaciones de irradiacion del Reactor TRIGA

    Energy Technology Data Exchange (ETDEWEB)

    Caldera C, M. de G.

    2013-07-01

    The k{sub 0} method with the technique of neutron activation analysis allows obtaining important characteristics parameters that describe a nuclear reactor. Among these parameters are the form factor of epithermal neutron flux, α and the ratio of thermal neutron flux with respect to the epithermal neutron flux, f. These parameters were obtained by irradiation of two different monitors, one of Au-Zr and the other of Au-Mo-Cr, where the last one was made and implemented for the first time. Both monitors were irradiated in different positions in the TRIGA Mark III Reactor at the National Institute of Nuclear Research. (Author)

  4. Development of a simulator for design and test of power controllers in a TRIGA Mark III reactor; Desarrollo de un simulador para diseno y prueba de controladores de potencia en un reactor TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Perez M, C.; Benitez R, J.S.; Lopez C, R. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2003-07-01

    The development of a simulator that uses the Runge-Kutta-Fehlberg method to solve the model of the punctual kinetics of a nuclear research reactor type TRIGA. The simulator includes an algorithm of power control of the reactor based on the fuzzy logic, a friendly graphic interface which responds to the different user's petitions and that it shows numerical and graphically the results in real time. The user can modify the demanded power and to visualize the dynamic behavior of the one system. This simulator was developed in Visual Basic under an open architecture with which its will be prove different controllers for its analysis. (Author)

  5. Neutronic and thermal-hydraulic analysis of new irradiation channels inside the Moroccan TRIGA Mark II research reactor core.

    Science.gov (United States)

    Chham, E; El Bardouni, T; Benaalilou, K; Boukhal, H; El Bakkari, B; Boulaich, Y; El Younoussi, C; Nacir, B

    2016-10-01

    This study was conducted to improve the capacity of radioisotope production in the Moroccan TRIGA Mark II research reactor, which is considered as one of the most important applications of research reactors. The aim of this study is to enhance the utilization of TRIGA core in the field of neutron activation and ensure an economic use of the fuel. The main idea was to create an additional irradiation channel (IC) inside the core. For this purpose, three new core configurations are proposed, which differ according to the IC position in the core. Thermal neutron flux distribution and other neutronic safety parameters such as power peaking factors, excess reactivity, and control rods worth reactivity were calculated using the Monte Carlo N-Particle Transport (MCNP) code and neutron cross-section library based on ENDF/B-VII evaluation. The calculated thermal flux in the central thimble (CT) and in the added IC for the reconfigured core is compared with the thermal flux in the CT of the existing core, which is taken as a reference. The results show that all the obtained fluxes in CTs are very close to the reference value, while a remarkable difference is observed between the fluxes in the new ICs and reference. This difference depends on the position of IC in the reactor core. To demonstrate that the Moroccan TRIGA reactor could safely operate at 2MW, with new configurations based on new ICs, different safety-related thermal-hydraulic parameters were investigated. The PARET model was used in this study to verify whether the safety margins are met despite the new modifications of the core. The results show that it is possible to introduce new ICs safely in the reactor core, because the obtained values of the parameters are largely far from compromising the safety of the reactor. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Neutron flux measurements at the TRIGA reactor in Vienna for the prediction of the activation of the biological shield.

    Science.gov (United States)

    Merz, Stefan; Djuricic, Mile; Villa, Mario; Böck, Helmuth; Steinhauser, Georg

    2011-11-01

    The activation of the biological shield is an important process for waste management considerations of nuclear facilities. The final activity can be estimated by modeling using the neutron flux density rather than the radiometric approach of activity measurements. Measurement series at the TRIGA reactor Vienna reveal that the flux density next to the biological shield is in the order of 10(9)cm(-2)s(-1) at maximum power; but it is strongly influenced by reactor installations. The data allow the estimation of the final waste categorization of the concrete according to the Austrian legislation. Copyright © 2011 Elsevier Ltd. All rights reserved.

  7. Computational analysis of neutronic parameters for TRIGA Mark-II research reactor using evaluated nuclear data libraries

    Energy Technology Data Exchange (ETDEWEB)

    Uddin, M.N. [Department of Physics, Jahangirnagar University, Dhaka (Bangladesh); Sarker, M.M., E-mail: sarker_md@yahoo.co [Reactor Physics and Engineering Division, Institute of Nuclear Science and Technology, Atomic Energy Research Establishment, Ganakbari, Savar, GPO Box 3787, Dhaka-1000 (Bangladesh); Khan, M.J.H. [Reactor Physics and Engineering Division, Institute of Nuclear Science and Technology, Atomic Energy Research Establishment, Ganakbari, Savar, GPO Box 3787, Dhaka-1000 (Bangladesh); Islam, S.M.A. [Department of Physics, Jahangirnagar University, Dhaka (Bangladesh)

    2010-03-15

    The aim of this study is to analyze the neutronic parameters of TRIGA Mark-II research reactor using the chain of NJOY-WIMS-CITATION computer codes based on evaluated nuclear data libraries CENDL-2.2 and JEFF-3.1.1. The nuclear data processing code NJOY99.0 has been employed to generate the 69 group WIMS library for the isotopes of TRIGA core. The cell code WIMSD-5B was used to generate the cross sections in CITATION format and then 3-dimensional diffusion code CITTATION was used to calculate the neutronic parameters of the TRIGA Mark-II research reactor. All the analyses were performed using the 7-group macroscopic cross section library. The CITATION test-runs using different cross section sets based on different models applied in WIMS calculations have shown a strong influence of those models on the final integral parameters. Some of the cells were specially treated with PRIZE options available in WIMSD-5B to take into account the fine structure of the flux gradient in the fuel-reflector interface region. It was observed that two basic parameters, the effective multiplication factor, k{sub eff} and the thermal neutron flux, were in good agreement among the calculated results with each other as well as the measured values. The maximum power densities at the hot spot were 1.0446E02 W/cc and 1.0426E02 W/cc for the libraries CENDL-2.2 and JEFF-3.1.1 respectively. The calculated total peaking factors 5.793 and 5.745 were compared to the original SAR value of 5.6325 as well as MCNP result. Consequently, this analysis will be helpful to enhance the neutronic calculations and also be used for the further thermal-hydraulics study of the TRIGA core.

  8. The Operational Parameter Electronic Database of the IPR-R1 TRIGA Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Mesquita, Amir Zacarias; Gomes do Prado Souza, Rose Mary [Nuclear Technology Development Center (CDTN), Belo Horizonte - MG (Brazil)

    2008-10-29

    The new data acquisition based on microcomputer has been designed and developed to allow the real-time collection of all IPR-R1 TRIGA operational parameters. The System monitors and stores the following parameters: control rod positions and its reactivity, reactor power by neutronic and thermal methods, fuel and water temperatures, radiation levels, primary cooling system flow, water pool level and so on. The reactor instrumentation includes four neutron channels that are fed by three neutron-sensitive ion chambers, and by one fission chamber located around the core. The detector signals are amplified in a voltage amplifier. The amplified output voltage is between 0 to {+-} 10 V which is the input sign of the multiplexing board and to the analog to digital converter card of the PC with the associated software. Other analog signs, collected by the data acquisition system, are outputs of the reactor control console and from some digital indicators or directly from the thermocouples. The measure data are shown in the LCD computer video monitor. The data acquisition system is programmed with a set of icons called visual programming. The main indications of the control console are collected by the data acquisition system. Information on all aspects of reactor operation is displayed on the computer screen. The program presents four screens: 1 - control, start up channel, period and reactivity, 2 - radiation levels, 3 - power channels and 4 - cooling system and temperatures. Bar graph indicators, and visual and audible enunciators are also provided. Information displayed on the monitor is recorded on hard disk copy. The analogical signs are received in three cards model PCLD-789 by Advantech Co connected in cascade, each one with 16 channels which totalize 48 inputs. The outputs of the three conditioning cards are addressed to the analog input plug of the data acquisition card, model PCL-818hd by Advantech Co. The system collects data during reactor operations and stores

  9. Upgrade of the ultracold neutron source at the pulsed reactor TRIGA Mainz

    Science.gov (United States)

    Kahlenberg, J.; Ries, D.; Ross, K. U.; Siemensen, C.; Beck, M.; Geppert, C.; Heil, W.; Hild, N.; Karch, J.; Karpuk, S.; Kories, F.; Kretschmer, M.; Lauss, B.; Reich, T.; Sobolev, Y.; Trautmann, N.

    2017-11-01

    The performance of the upgraded solid deuterium ultracold neutron source at the pulsed reactor TRIGA Mainz is described. The current configuration stage comprises the installation of a He liquefier to run UCN experiments over long-term periods, the use of stainless steel neutron guides with improved transmission as well as sputter-coated non-magnetic 58NiMo alloy at the inside walls of the thermal bridge and the converter cup. The UCN yield was measured in a "standard" UCN storage bottle (stainless steel) with a volume of 32 litres outside the biological shield at the experimental area yielding UCN densities of 8.5/cm3; an increase by a factor of 3.5 compared to the former setup. The measured UCN storage curve is in good agreement with the predictions from a Monte Carlo simulation developed to model the source. The growth and formation of the solid deuterium converter during freeze-out are affected by the ortho/para ratio of the H2 premoderator.

  10. Retrofitting of TRIGA Mark I reactor with a microprocessor-based neutron monitoring system

    Energy Technology Data Exchange (ETDEWEB)

    Blotcky, A.J.; Claassen, J.P.

    1991-11-01

    The 20-kW TRIGA Mark I nuclear reactor at the Omaha Department of Veterans Affairs Medical Center was started up on June 26, 1959, and has been operating daily ever since with its original vacuum tube electronics. In 1965, the two 6.25-in. Varian strip chart recorders were replaced with a single Westronic dual-pen vacuum tube recorder. With the increasing role that solid-state devices have played in current instrumentation, it has been difficult to procure replacement balancing motors, choppers, and vacuum tubes for the Westronic recorder. Because of the age of some of the other component parts in the recorder, such as resistors, electrolytic capacitors, and gears, the authors found themselves continually repairing the instrument in order to decrease noise and dead band. Because the other elements of the console were still operating almost trouble free, they decided to replace only the neutron monitoring system. For the 1.7 yr that the system has been in operation, the system has demonstrated reliability in operation.

  11. First production of ultracold neutrons with a solid deuterium source at the pulsed reactor TRIGA Mainz⋆

    Science.gov (United States)

    Frei, A.; Sobolev, Yu.; Altarev, I.; Eberhardt, K.; Gschrey, A.; Gutsmiedl, E.; Hackl, R.; Hampel, G.; Hartmann, F. J.; Heil, W.; Kratz, J. V.; Lauer, Th.; Liźon Aguilar, A.; Müller, A. R.; Paul, S.; Pokotilovski, Yu.; Schmid, W.; Tassini, L.; Tortorella, D.; Trautmann, N.; Trinks, U.; Wiehl, N.

    2007-11-01

    The production rates of ultracold neutrons (UCN) with a solid deuterium converter have been measured at the pulsed reactor TRIGA Mainz. Exposed to a thermal neutron fluence of ensuremath ˜ 1\\cdot 10^{13} n·cm^-2·pulse^-1, the number of detected very cold and ultracold neutrons ranges up to 200 000 at 7mol of solid deuterium (sD2) in combination with a pre-moderator (mesitylene). About 50% of the measured neutrons can be assigned to UCN with energies E of ensuremath V_F(sD_2)≤ E ≤ V_F(guide) where V F( sD 2) = 105 neV and V F( guide) = 190 neV are the Fermi potentials of the sD2 converter and our stainless steel neutron guides, respectively. Thermal cycling of solid deuterium, which was frozen out from the gas phase, considerably improved the UCN yield, in particular at higher amounts of sD2.

  12. Simulation of Collimator for Neutron Imaging Facility of TRIGA MARK II PUSPATI Reactor

    Science.gov (United States)

    Zin, Muhammad Rawi Mohamed; Jamro, Rafhayudi; Yazid, Khairiah; Hussain, Hishamuddin; Yazid, Hafizal; Ahmad, Megat Harun Al Rashid Megat; Azman, Azraf; Mohamad, Glam Hadzir Patai; Hamzah, Nai'im Syaugi; Abu, Mohamad Puad

    Neutron Radiography facility in TRIGA MARK II PUSPATI reactor is being upgraded to obtain better image resolution as well as reducing exposure time. Collimator and exposure room are the main components have been designed for fabrication. This article focuses on the simulation part that was carried out to obtain the profile of collimated neutron beam by utilizing the neutron transport protocol code in the Monte Carlo N-Particle (MCNP) software. Particular interest is in the selection of materials for inlet section of the collimator. Results from the simulation indicates that a combination of Bismuth and Sapphire, each of which has 5.0 cm length that can significantly filter both the gamma radiation and the fast neutrons. An aperture made of Cadmium with 1.0 cm opening diameter provides thermal neutron flux about 1.8 x108 ncm-2s-1 at the inlet, but reduces to 2.7 x106 ncm-2s-1 at the sample plane. Still the flux obtained is expected to reduces exposure time as well as gaining better image resolution.

  13. Estimation of fast neutron fluence in steel specimens type Laguna Verde in TRIGA Mark III reactor; Estimacion de la fluencia de neutrones rapidos en probetas de acero tipo Laguna Verde en el reactor Triga Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Galicia A, J.; Francois L, J. L. [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Ciudad Universitaria, 04510 Ciudad de Mexico (Mexico); Aguilar H, F., E-mail: blink19871@hotmail.com [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2015-09-15

    The main purpose of this work is to obtain the fluence of fast neutrons recorded within four specimens of carbon steel, similar to the material having the vessels of the BWR reactors of the nuclear power plant of Laguna Verde when subjected to neutron flux in a experimental facility of the TRIGA Mark III reactor, calculating an irradiation time to age the material so accelerated. For the calculation of the neutron flux in the specimens was used the Monte Carlo code MCNP5. In an initial stage, three sheets of natural molybdenum and molybdenum trioxide (MoO{sub 3}) were incorporated into a model developed of the TRIGA reactor operating at 1 M Wth, to calculate the resulting activity by setting a certain time of irradiation. The results obtained were compared with experimentally measured activities in these same materials to validate the calculated neutron flux in the model used. Subsequently, the fast neutron flux received by the steel specimens to incorporate them in the experimental facility E-16 of the reactor core model operating at nominal maximum power in steady-state was calculated, already from these calculations the irradiation time required was obtained for values of the neutron flux in the range of 10{sup 18} n/cm{sup 2}, which is estimated for the case of Laguna Verde after 32 years of effective operation at maximum power. (Author)

  14. Coordination of motor systems of the control bars of TRIGA Mark III reactor, through the use of a PLC; Coordinacion de los sistemas motrices de las barras de control del reactor Triga Mark III, mediante el uso de un PLC

    Energy Technology Data Exchange (ETDEWEB)

    Castro R, P. R.

    2016-07-01

    The use of programmable logic controllers (PLCs) has a wide field in the realization of automatic systems, since is sought that the form of control is easy for any user. In this work, the TRIGA Mark III reactor of Instituto Nacional de Investigaciones Nucleares (ININ) is intended to operate with a programming code in PLC for the automation of the control rods, having uniform wear according to the power required by the user. On the other hand, is proposed to develop an HMI graphical interface for communication via Ethernet, allowing supervision during the reactor operation process and greater protection of operators during reactor startup. The accuracy of the new actuators, as well as their durability, will allow a good performance of the reactor for many years to come. (Author)

  15. Capture programs, analysis, data graphication for the study of the thermometry of the TRIGA Mark III reactor core; Programas de captura, analisis y graficado de datos para el estudio de la termometria del nucleo del reactor TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Paredes G, L.C

    1991-05-15

    This document covers the explanation of the capture programs, analysis and graphs of the data obtained during the measurement of the temperatures of the instrumented fuel element of the TRIGA Mark III reactor and of the coolant one near to this fuel, using the conversion card from Analogic to Digital of 'Data Translation', and using a signal conditioner for five temperature measurers with the help of thermo par type K, developed by the Simulation and Control of the nuclear systems management department, which gives a signal from 0 to 10 Vcd for an interval of temperature of 0 to 1000 C. (Author)

  16. Main configurations of the reactor core TRIGA Mark III of the ININ, during their operation; Principales configuraciones del nucleo del reactor TRIGA Mark III del ININ, durante su operacion

    Energy Technology Data Exchange (ETDEWEB)

    Nava S, W.; Raya A, R., E-mail: Wenceslao.nava@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2012-10-15

    The Reactor TRIGA Mark III is 43 years old since was put lay critical on November 8 of 1968 for the first time, along their operative life there have been 18 different configurations of the core, being three those more important: the first configuration with elements standard with an enrichment lightly minor than 20% in U-235, the second configuration that deserves out attention is when a mixed core was charged, composite of two different fuels as for their enrichment, the core consisted of 26 fuel elements Flip (of high enrichment approximately of 70%) more 3 control bars with follower of fuel Flip and 59 standard fuel elements, as those mentioned previously, finally is necessary to consider the recent reload of the reactor, with a compound core by fuel elements of low enrichment LEU 30/20. In this work the characteristics more important of the reactor are presented as well as of each one of the described cores. (Author)

  17. Development of a One-Dimensional Small-Angle Neutron Scattering Instrument at the University of Illinois TRIGA Reactor Laboratory

    Science.gov (United States)

    Monti, D. A.; Guillermo, N. R.; Hulin, M. J.; Heuser, B. J.; Toreja, A.; Moschetti, T. L.

    1996-03-01

    A small-angle neutron scattering instrument with slit-smeared geometry (1-D SANS) has been constructed at the University of Illinois 1.5 MWatt TRIGA reactor. This facility falls under the general heading of "low-flux research reactors" which typically are not used for neutron scattering research. Low-flux reactors can support neutron scattering research under certain conditions, however. 1-D SANS using elastically-bent crystal optics is one such example [Popovici, et al. (1995). J. Phys. Chem. Solids 56, 1425-1431]. Our instrument uses a pyrolytic graphite pre-monochromator and two elastically-bent Si wafers, all in a (+,+,-) configuration. Instrumental performance including low-angle resolution, on-sample intensity, resolution variability, and cross-section measurement capability will be presented.

  18. Design of a digital system for operational parameters simulation of IPR-R1 TRIGA nuclear research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lage, Aldo M.F.; Mesquita, Amir Z.; Felippe, Adriano de A.M., E-mail: aldo@cdtn.br, E-mail: amir@cdtn.br, E-mail: adrianoamfelippe@gmail.com [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN /CNEN-MG), Belo Horizonte, MG (Brazil); Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil)

    2017-11-01

    The instrumentation of nuclear reactors is designed based on the reliability, redundancy and diversification of control systems. The monitoring of the parameters is of crucial importance with regard to the operational efficiency and safety of the installation. Since the first criticality of a nuclear reactor, achieved by Fermi et al. in 1942, there has been concern about the reliable monitoring of the parameters involved in the chain reaction. This paper presents the current stage of the system of simulation, which is under development at the CDTN, which intends to simulate the operation of the TRIGA IPR-R1 nuclear reactor, involving the evolution of neutron flux and reactor power related events. The system will be developed using LabVIEW® software, using the modern concept of virtual instruments (VIs) that are visualized in a video monitor. For the implementation of this model, computational tools and systems analysis are necessary, which help and facilitate the implementation of the simulator. In this article we will show some of these techniques and the initial design of the model to be implemented. The design of a computational system is of great importance, since it guides in the implementation stages and generates the documentation for later maintenance and updating of the computational system. It is noteworthy that the innovations developed in research reactors are normally used in power reactors. The relatively low costs enable research reactors to be an excellent laboratory for developing techniques for future reactors. (author)

  19. Estimation of (41)Ar activity concentration and release rate from the TRIGA Mark-II research reactor.

    Science.gov (United States)

    Hoq, M Ajijul; Soner, M A Malek; Rahman, A; Salam, M A; Islam, S M A

    2016-03-01

    The BAEC TRIGA research reactor (BTRR) is the only nuclear reactor in Bangladesh. Bangladesh Atomic Energy Regulatory Authority (BAERA) regulations require that nuclear reactor licensees undertake all reasonable precautions to protect the environment and the health and safety of persons, including identifying, controlling and monitoring the release of nuclear substances to the environment. The primary activation product of interest in terms of airborne release from the reactor is (41)Ar. (41)Ar is a noble gas readily released from the reactor stacks and most has not decayed by the time it moves offsite with normal wind speed. Initially (41)Ar is produced from irradiation of dissolved air in the primary water which eventually transfers into the air in the reactor bay. In this study, the airborne radioisotope (41)Ar generation concentration, ground level concentration and release rate from the BTRR bay region are evaluated theoretically during the normal reactor operation condition by several governing equations. This theoretical calculation eventually minimizes the doubt about radiological safety to determine the radiation level for (41)Ar activity whether it is below the permissible limit or not. Results show that the estimated activity for (41)Ar is well below the maximum permissible concentration limit set by the regulatory body, which is an assurance for the reactor operating personnel and general public. Thus the analysis performed within this paper is so much effective in the sense of ensuring radiological safety for working personnel and the environment. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Development of the user interface for visualization of the auxiliary systems of the TRIGA Mark III nuclear reactor; Desarrollo de la interface de usuario para la visualizacion de los sistemas auxiliares del reactor nuclear Triga Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Merced D, J. E.

    2016-07-01

    The Instituto Nacional de Investigaciones Nucleares (ININ) has a nuclear research reactor type swimming pool with movable core cooled and moderate with light water. The nominal maximum power of the reactor is 1 MW in steady-state operation and can be pulsed at a maximum power of 2,000 MW for approximately 10 milliseconds. This reactor is mainly used to study the effects of radiation on various materials and substances. In 2001 the new control console of the nuclear reactor was installed which was based on two digital computers, one computer controls the bar management mechanisms and the other the systems to the reactor operator. In 2004, the control computer was replaced and the software was updated. Within the modernization and/or updating of the TRIGA Mark III reactor of ININ, is intended (theme of this work) to develop the user interface for the visualization of the auxiliary systems, through a Man-Machine Interface module for the renewal process of the control console. The man-machine interface system to be developed will have communication with the programmable logic controllers that will be constantly monitored and controlled to obtain real-time variables of the reactor behavior. (Author)

  1. Preparation, Irradiation and Clinical Use of Holmium Containing Microspheres Obtained by Neutron Irradition in TRIGA Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Sedda, A.F.; Rossi, G. [UTTMAT-IRR, ENEA Casaccia, Rome (Italy)

    2011-07-01

    A radioactive composition for use in therapy, containing radioisotopes immobilized on biocompatible and bioabsorbable poly(lactic acid)-based microspheres was prepared, and internationally patented. A 10% of an holmium organic complex was previously embedded within the matrix of the microspheres, that were successively irradiated in a TRIGA reactor for 1- to 3 hours 2 hours at a flux of 1,25.10{sup 13} n cm{sup -2} s{sup -1}, obtaining a total activity of 5-200 mCi of {sup 166}Ho per irradiation. The irradiated microspheres were certified sterile at the end of the irradiation, due to the gamma and neutron flux of the reactor. The radioactive microsphere were dispersed in a biocompatible and bioabsorbable matrix consisting of a hypotonic gel, and were used in the therapy of neoplastic diseases, by application of radioactive sources in direct contact with the tumor tissues or within the same (brachytherapy). Patients with II and III grade glioblastoma multiforme were treated, by hypodermic injection in the Ommaya reservoir placed under the patient's scalp, visualising the introduction of the microparticle-containing gel in the brain cavity by computed tomography (CT) and gamma scintigraphy. It has thus been ascertained that the introduced substance forms, at the outset, an approximately spherical deposit, and that the gel is later gradually absorbed in the surrounding tissue, thus leaving the dispersed radioactive particles in contact with all of the interstices of the brain cavity. Patients with solid hepatic or splenic tumours, that were considered untreatable by surgery due to bad general conditions or advanced age, have been treated by injecting intratissue the microspheres in the tumour lesions, under stereotaxy and ultrasound or radiographic visualisation. Patients with solid hepatic, adrenal or renal tumours, that were considered untreatable by surgery due to bad general conditions or advanced age, have been treated by injecting intra-arterially the

  2. Dependence of neutron rate production with accelerator beam profile and energy range in an ADS-TRIGA RC1 reactor

    Energy Technology Data Exchange (ETDEWEB)

    Firoozabadi, M.M.; Karimi, J. [Birjand Univ. (Iran, Islamic Republic of). Dept. of Physics; Zangian, M. [Shahid Beheshti Univ., Tehran (Iran, Islamic Republic of). Nuclear Engineering Dept.

    2016-12-15

    Lead, mercury, tantalum and tungsten were used as target material for calculation of spallation processes in an ADS-TRIGA RC1 reactor. The results show that tungsten has the highest neutron production rate. Therefore it was selected as target material for further calculations. The sensitivity of neutron parameters of the ADS reactor core relative to a change of beam profile and proton energy was determined. The core assembly and parameters of the TRIGA RC1 demonstration facility were used for the calculation model. By changing the proton energy from 115 to 1 400 MeV by using the intra-nuclear cascade model of Bertini (INC-Bertini), the quantity of the relative difference in % for energy gain (G) and spallation neutron yield (Y{sub n/p}), increases to 289.99 % and 5199.15 % respectively. These changes also reduce the amount of relative difference for the proton beam current (I{sub p}) and accelerator power (P{sub acc}), 99.81 % and 81.28 % respectively. In addition, the use of a Gaussian distribution instead of a uniform distribution in the accelerator beam profile increases the quantity of relative difference for energy gain (G), net neutron multiplication (M) and spallation neutron yield (Y{sub n/p}), up to 4.93 %, 4.9 % and 5.55 % respectively.

  3. Implementation of k0-INAA standardisation at ITU TRIGA Mark II research reactor, Turkey based on k0-IAEA software

    Science.gov (United States)

    Esen, Ayse Nur; Haciyakupoglu, Sevilay

    2016-02-01

    The purpose of this study is to test the applicability of k0-INAA method at the Istanbul Technical University TRIGA Mark II research reactor. The neutron spectrum parameters such as epithermal neutron flux distribution parameter (α), thermal to epithermal neutron flux ratio (f) and thermal neutron flux (φth) were determined at the central irradiation channel of the ITU TRIGA Mark II research reactor using bare triple-monitor method. HPGe detector calibrations and calculations were carried out by k0-IAEA software. The α, f and φth values were calculated to be -0.009, 15.4 and 7.92·1012 cm-2 s-1, respectively. NIST SRM 1633b coal fly ash and intercomparison samples consisting of clay and sandy soil samples were used to evaluate the validity of the method. For selected elements, the statistical evaluation of the analysis results was carried out by z-score test. A good agreement between certified/reported and experimental values was obtained.

  4. Simultaneous measurement of neutron and gamma-ray radiation levels from a TRIGA reactor core using silicon carbide semiconductor detectors

    Science.gov (United States)

    Dulloo, A. R.; Ruddy, F. H.; Seidel, J. G.; Davison, C.; Flinchbaugh, T.; Daubenspeck, T.

    1999-06-01

    The ability of a silicon carbide radiation detector to measure neutron and gamma radiation levels in a TRIGA reactor's mixed neutron/gamma field was demonstrated. Linear responses to epicadmium neutron fluence rate (up to 3/spl times/10/sup 7/ cm/sup -2/ s/sup -1/) and to gamma dose rate (0.6-234 krad-Si h/sup -1/) were obtained with the detector. Axial profiles of the reactor core's neutron and gamma-ray radiation levels were successfully generated through sequential measurements along the length of the core. The SiC detector shows a high level of precision for both neutrons and gamma rays in high-intensity radiation environments-1.9% for neutrons and better than 0.6% for gamma rays. These results indicate that SiC detectors are well suited for applications such as spent fuel monitoring where measurements in mixed neutron/gamma fields are desired.

  5. Experimental study of the temperature distribution in the TRIGA IPR-R1 Brazilian research reactor; Investigacao experimental da distribuicao de temperaturas no reator nuclear de pesquisa TRIGA IPR-R1

    Energy Technology Data Exchange (ETDEWEB)

    Mesquita, Amir Zacarias

    2005-07-01

    The TRIGA-IPR-R1 Research Nuclear Reactor has completed 44 years in operation in November 2004. Its initial nominal thermal power was 30 kW. In 1979 its power was increased to 100 kW by adding new fuel elements to the reactor. Recently some more fuel elements were added to the core increasing the power to 250 kW. The TRIGA-IPR-R1 is a pool type reactor with a natural circulation core cooling system. Although the large number of experiments had been carried out with this reactor, mainly on neutron activation analysis, there is not many data on its thermal-hydraulics processes, whether experimental or theoretical. So a number of experiments were carried out with the measurement of the temperature inside the fuel element, in the reactor core and along the reactor pool. During these experiments the reactor was set in many different power levels. These experiments are part of the CDTN/CNEN research program, and have the main objective of commissioning the TRIGA-IPR-R1 reactor for routine operation at 250 kW. This work presents the experimental and theoretical analyses to determine the temperature distribution in the reactor. A methodology for the calibration and monitoring the reactor thermal power was also developed. This methodology allowed adding others power measuring channels to the reactor by using thermal processes. The fuel thermal conductivity and the heat transfer coefficient from the cladding to the coolant were also experimentally valued. lt was also presented a correlation for the gap conductance between the fuel and the cladding. The experimental results were compared with theoretical calculations and with data obtained from technical literature. A data acquisition and processing system and a software were developed to help the investigation. This system allows on line monitoring and registration of the main reactor operational parameters. The experiments have given better comprehension of the reactor thermal-fluid dynamics and helped to develop numerical

  6. A study on source term assessment and waste disposal requirement of decontamination and decommissioning for the TRIGA research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Whang, Joo Ho; Lee, Kyung JIn; Lee, Jae Min; Choi, Gyu Seup; Shin, Byoung Sun [Kyunghee Univ., Seoul (Korea, Republic of)

    1999-08-15

    The objective and necessity of the project : TRIGA is the first nuclear facility that decide to decommission and decontamination in our nation. As we estimate the expected life of nuclear power generation at 30 or 40 years, the decommissioning business should be conducted around 2010, and the development of regulatory technique supporting it should be developed previously. From a view of decommissioning and decontamination, the research reactor is just small in scale but it include all decommissioning and decontamination conditions. So, the rules by regulatory authority with decommissioning will be a guide for nuclear power plant in the future. The basis of regulatory technique required when decommissioning the research reactor are the radiological safety security and the data for it. The source term is very important condition not only for security of worker but for evaluating how we dispose the waste is appropriate for conducting the middle store and the procedure after it when the final disposal is considered. The content and the scope in this report contain the procedure of conducting the assessment of the source term which is most important in understanding the general concept of the decommissioning procedure of the decommissioning and decontamination of TRIGA research reactor. That is, the sampling and measuring method is presented as how to measure the volume of the radioactivity of the nuclear facilities. And also, the criterion of classifying the waste occurred in other countries and the site release criteria which is the final step of decommissioning and decontamination presented through MARSSIM. Finally, the program to be applicable through comparing the methods of our nation and other countries ones is presented as plan for disposal of the waste in the decommissioning.

  7. Core map generation for the ITU TRIGA Mark II research reactor using Genetic Algorithm coupled with Monte Carlo method

    Energy Technology Data Exchange (ETDEWEB)

    Türkmen, Mehmet, E-mail: tm@hacettepe.edu.tr [Nuclear Engineering Department, Hacettepe University, Beytepe Campus, Ankara (Turkey); Çolak, Üner [Energy Institute, Istanbul Technical University, Ayazağa Campus, Maslak, Istanbul (Turkey); Ergün, Şule [Nuclear Engineering Department, Hacettepe University, Beytepe Campus, Ankara (Turkey)

    2015-12-15

    Highlights: • Optimum core maps were generated for the ITU TRIGA Mark II Research Reactor. • Calculations were performed using a Monte Carlo based reactor physics code, MCNP. • Single-Objective and Multi-Objective Genetic Algorithms were used for the optimization. • k{sub eff} and ppf{sub max} were considered as the optimization objectives. • The generated core maps were compared with the fresh core map. - Abstract: The main purpose of this study is to present the results of Core Map (CM) generation calculations for the İstanbul Technical University TRIGA Mark II Research Reactor by using Genetic Algorithms (GA) coupled with a Monte Carlo (MC) based-particle transport code. Optimization problems under consideration are: (i) maximization of the core excess reactivity (ρ{sub ex}) using Single-Objective GA when the burned fuel elements with no fresh fuel elements are used, (ii) maximization of the ρ{sub ex} and minimization of maximum power peaking factor (ppf{sub max}) using Multi-Objective GA when the burned fuels with fresh fuels are used. The results were obtained when all the control rods are fully withdrawn. ρ{sub ex} and ppf{sub max} values of the produced best CMs were provided. Core-averaged neutron spectrum, and variation of neutron fluxes with respect to radial distance were presented for the best CMs. The results show that it is possible to find an optimum CM with an excess reactivity of 1.17 when the burned fuels are used. In the case of a mix of burned fuels and fresh fuels, the best pattern has an excess reactivity of 1.19 with a maximum peaking factor of 1.4843. In addition, when compared with the fresh CM, the thermal fluxes of the generated CMs decrease by about 2% while change in the fast fluxes is about 1%.Classification: J. Core physics.

  8. Determination of the fluence profile in three dimension for the thermal column of the TRIGA Mark III reactor; Determinacion del perfil de fluencia en tres dimensiones para la columna termica del reactor TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Herrera A, E.; Urena N, F.; Delfin L, A.; Garcia M, T. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: eha@nuclear.inin.mx

    2006-07-01

    In this work the results of the dosimetric properties of the lithium carbonate are presented (detecting), before the thermal neutrons. The process consists on irradiating samples of lithium carbonate in the installation of the thermal column of the TRIGA Mark III reactor, with a controlled period and with time intervals of 20 hours of irradiation. It is necessary to mention that the detectors were placed in different internal positions of the thermal column. With the purpose of being used these results for future studies, like it is the fluence profile in the thermal column. To use the BNCT technique (Boron Neutron Capture Therapy). Which is a binary technique that requires the simultaneous presence of a neutron flux with appropriate energy and a neutron captor (10B), those which interacting to attack to the tumor cells without producing significant damage to the tissues when both agents are separated. (Author)

  9. Computer aided design (CAD) for electronics improvement of the nuclear channels of TRIGA Mark III reactor of the ININ; Diseno asistido por computadora (DAC) para mejorar la electronica de los canales nucleares del reactor TRIGA Mark III del ININ

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez M, J.L.; Rivero G, T.; Aguilar H, F. [ININ, 52750 La Marquesa, Estado de Mexico (Mexico)]. e-mail: jlgm@nuclear.inin.mx

    2007-07-01

    The 4 neutron measurement channels of the digital control console (CCD) of the TRIGA Mark III reactor (RTMIII) of the ININ, its were designed and built with the corresponding Quality Guarantee program, being achieved the one licensing to replace the old console. With the time they were carried out some changes to improve and to not solve some problems detected in the tests, verification and validation, requiring to modify the circuits originally designed. In this work the corrective actions carried out to eliminate the Non Conformity generated by these problems, being mentioned the advantages of using modern tools, as the software applied to the Attended Engineering by Computer, and those obtained results are presented. (Author)

  10. Development of a software for the control of the quality management system of the TRIGA-Mark III reactor; Desarrollo de un software para el control del sistema de gestion de calidad del reactor TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Herrera A, E. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico); Hernandez, L.V.; Hernandez, J.A. [UAEM, Depto. de Ingenieria en Computacion, 50000 Toluca, estado de Mexico (Mexico)]. e-mail: eha@nuclear.inin.mx

    2006-07-01

    The quality has not only become one of the essential requirements of the product but rather at the presenme it is a strategic factor key of which depends the bigger part of the organizations, not only to maintain their position in the market but also to assure their survival. The good organizations will have processes, procedures and standards to confront these challenges. The big organizations require of the certification of their administration systems, and once the organization has obtained this certification the following step it is to maintain it. The implementation and certification of an administration system requires of an appropriate operative organization that achieves continuous improvements in their operation. This is the case of the TRIGA Mark III reactor, which contains a computer program that upgrades, it controls and it programs activities to develop in the Installation, allowing one operative organization to the whole personnel of the same one. With the purpose of avoiding activities untimely. (Author)

  11. Characterization of the neutron flux in the Hohlraum of the thermal column of the TRIGA Mark III reactor of the ININ; Caracterizacion del flujo neutronico en el Hohlraum de la columna termica del reactor TRIGA Mark III del ININ

    Energy Technology Data Exchange (ETDEWEB)

    Delfin L, A.; Palacios, J.C.; Alonso, G. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: adl@nuclear.inin.mx

    2006-07-01

    Knowing the magnitude of the neutron flux in the reactor irradiation facilities, is so much importance for the operation of the same one, like for the investigation developing. Particularly, knowing with certain precision the spectrum and the neutron flux in the different positions of irradiation of a reactor, it is essential for the evaluation of the results obtained for a certain irradiation experiment. The TRIGA Mark III reactor account with irradiation facilities designed to carry out experimentation, where the reactor is used like an intense neutron source and gamma radiation, what allows to make irradiations of samples or equipment in radiation fields with components and diverse levels in the different facilities, one of these irradiation facilities is the Thermal Column where the Hohlraum is. In this work it was carried out a characterization of the neutron flux inside the 'Hohlraum' of the irradiation facility Thermal Column of the TRIGA Mark III reactor of the Nuclear Center of Mexico to 1 MW of power. It was determined the sub cadmic neutron flux and the epi cadmic by means of the neutron activation technique of thin sheets of gold. The maps of the distribution of the neutron flux for both energy groups in three different positions inside the 'Hohlraum' are presented, these maps were obtained by means of the irradiation of undressed thin activation sheets of gold and covered with cadmium in arrangements of 10 x 12, located parallel to 11.5 cm, 40.5 cm and 70.5 cm to the internal wall of graphite of the installation in inverse address to the position of the reactor core. Starting from the obtained values of neutron flux it was found that, for the same position of the surface of irradiation of the experimental arrangement, the relative differences among the values of neutron flux can be of 80%, and that the differences among different positions of the irradiation surfaces can vary until in a one order of magnitude. (Author)

  12. The reactor core TRIGA Mark-III with fuels type 30/20; El nucleo del reactor TRIGA Mark-III con combustible tipo 30/20

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar H, F., E-mail: fortunato.aguilar@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2012-10-15

    This work describes the calculation series carried out with the program MCNP5 in order to define the configuration of the reactor core with fuels 30/20 (fuels with 30% of uranium content in the Or-Zr-H mixture and a nominal enrichment of 20%). To select the configuration of the reactor core more appropriate to the necessities and future uses of the reactor, the following criterions were taken into account: a) the excess in the reactor reactivity, b) the switch out margin and c) to have new irradiation facilities inside the reactor core. Taking into account these criterions is proceeded to know the characteristics of the components that form the reactor core (dimensions, geometry, materials, densities and positions), was elaborated a base model of the reactor core, for the MCNP5 code, with a configuration composed by 85 fuel elements, 4 control bars and the corresponding structural elements. The high reactivity excess obtained with this model, gave the rule to realize other models of the reactor core in which the reactivity excess and the switch out margin were approximate to the values established in the technical specifications of the reactor operation. Several models were realized until finding the satisfactory model; this is composite for 74 fuels, 4 control bars and 6 additional experimental positions inside the reactor core. (Author)

  13. THERMAL-HYDRAULICS PARAMETER ANALYSIS OF THE BANDUNG TRIGA 2000 REACTOR BASED ON CFD AND RELAP5/MOD3.2

    Directory of Open Access Journals (Sweden)

    Reinaldy Nazar

    2015-04-01

    Full Text Available Reactor TRIGA 2000 Bandung is result of upgrading TRIGA Mark II reactor from nominal power of 1 MW becomes 2 MW and has been opened its the operation in the year 2000. In this period change of operation parameters had been occurred, especially the parameter related to thermo-hydraulic aspect, like the height of reactor core temperature and the formation of vapor bubble in the core, which is on the contrary with the safety aspect. Safety is the priority in the reactor operation, hence reactor core temperature and vapor bubble in core need to be reduced. One of methods to reduce the core temperature and vapor bubble formation is the operation at limited power of 1000 kW. To examine the safety margin of Bandung TRIGA 2000 reactor operation at 1000 kW power, the analysis of thermo-hydraulic characteristic have been carried out by theoretical study using computer code of CFD (Computational of Fluid Dynamics and RELAP5/Mod3.2 (Reactor Excursion and Leak Analysis Program. The result of the study indicates that reactor reaches steady state condition at 1000 kW power in 1500 seconds after critical condition, and maximum temperature of reactor core is in C4 position, whereas the maximum temperature of fuel center, cladding, and cooling water at related fuel are 529.35 °C, 103.12 °C, and 90.67 °C, respectively. Maximum temperature of cladding and primary cooling water at related fuel are below saturation temperature (112.4 °C, so the sub-cooled boiling or bubbling of saturation and vapor bubble formation can be predicted not to be happened. Besides when the reactor was operated at 1200 kW and 1250 kW power was obtained the maximum temperature of fuel cladding are 111.04 °C and 115.53 °C, respectively. This thing informs that, when the reactor was operated up to 1200 kW power sub-cooled boiling has not happened, but when the reactor was operated at 1250 kW power has started the happening of the sub-cooled boiling and the formation of vapour bubble

  14. Neutronics and thermal hydraulic analysis of TRIGA Mark II reactor using MCNPX and COOLOD-N2 computer code

    Science.gov (United States)

    Tiyapun, K.; Wetchagarun, S.

    2017-06-01

    The neutronic analysis of TRIGA Mark II reactor has been performed. A detailed model of the reactor core was conducted including standard fuel elements, fuel follower control rods, and irradiation devices. As the approach to safety nuclear design are based on determining the criticality (keff), reactivity worth, reactivity excess, hot rod power factor and power peaking of the reactor, the MCNPX code had been used to calculate the nuclear parameters for different core configuration designs. The thermal-hydraulic model has been developed using COOLOD-N2 for steady state, using the nuclear parameters and power distribution results from MCNPX calculation. The objective of the thermal-hydraulic model is to determine the thermal safety margin and to ensure that the fuel integrity is maintained during steady state as well as during abnormal condition at full power. The hot channel fuel centerline temperature, fuel surface temperature, cladding surface temperature, the departure from nucleate boiling (DNB) and DNB ratio were determined. The good agreement between experimental data and simulation concerning reactor criticality proves the reliability of the methodology of analysis from neutronic and thermal hydraulic perspective.

  15. Characterization of control rod worths and fuel rod power peaking factors in the university of Utah TRIGA Mark I reactor

    Directory of Open Access Journals (Sweden)

    Alroumi Fawaz

    2016-01-01

    Full Text Available Control rod reactivity (worths for the three control rods and fuel rod power peaking factors in the University of Utah research reactor (100 kW TRIGA Mark I are characterized using the AGENT code system and the results described in this paper. These values are compared to the MCNP6 and existing experimental measurements. In addition, the eigenvalue, neutron spatial flux distributions and reaction rates are analyzed and discussed. The AGENT code system is widely benchmarked for various reactor types and complexities in their geometric arrangements of the assemblies and reactor core material distributions. Thus, it is used as a base methodology to evaluate neutronics variables of the research reactor at the University of Utah. With its much shorter computation time than MCNP6, AGENT provides agreement with the MCNP6 within a 0.5 % difference for the eigenvalue and a maximum difference of 10% in the power peaking factor values. Differential and integral control rod worths obtained by AGENT show well agreement with MCNP6 and the theoretical model. However, regulating the control rod worth is somewhat overestimated by both MCNP6 and AGENT models when compared to the experimental/theoretical values. In comparison to MCNP6, the total control rod worths and shutdown margin obtained with AGENT show better agreement to the experimental values.

  16. Elaboration of the configuration and programming of the interlocks system of the TRIGA Mark III reactor; Elaboracion de la configuracion y programacion del sistema de interbloqueos del reactor Triga Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Mejia C, M. A.

    2016-07-01

    The modernization of the TRIGA Mark III reactor interlock system requires a system that provides high reliability, flexibility and ease of operation during reactor operation. With this modernization of the system, is intended to prevent, control and mitigate the causes of probable accidents reported in the reactor accident analysis. On the other hand, is foreseen the ease reactor operation in a simple, safe and efficient way. The programmable logic controller can be programmed by programming instructions using simple language and easy to develop, these can be modified from a computer using the programming software. In addition, another of the advantages offered by the controller is that can be modified from a touch screen (human-machine interface) that allows adjustment, without the need to use programming software and diagnostic functions during the process. As a result of the present work, a situation of improvement in the reactor operation was generated, facilitating the handling of the bridge and increasing the efficiency of the system in the execution of the operating conditions of the installations external to the reactor. A modern, more reliable and much less expensive system was achieved than the previous one, avoiding that the maintenance to the system generates high expenses. With respect to the development of the application programming, a control was implemented that allows to select a zone of the five that have inside the pool to carry out the displacement of automatic way and later to be located in that zone, having in this way a greater efficiency and ease in bridge control. (Author)

  17. Development and validation of a model TRIGA Mark III reactor with code MCNP5; Desarrollo y validacion de un modelo del reactor Triga Mark III con el codigo MCNP5

    Energy Technology Data Exchange (ETDEWEB)

    Galicia A, J.; Francois L, J. L. [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Ciudad Universitaria, 04510 Ciudad de Mexico (Mexico); Aguilar H, F., E-mail: blink19871@hotmail.com [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2015-09-15

    The main purpose of this paper is to obtain a model of the reactor core TRIGA Mark III that accurately represents the real operating conditions to 1 M Wth, using the Monte Carlo code MCNP5. To provide a more detailed analysis, different models of the reactor core were realized by simulating the control rods extracted and inserted in conditions in cold (293 K) also including an analysis for shutdown margin, so that satisfied the Operation Technical Specifications. The position they must have the control rods to reach a power equal to 1 M Wth, were obtained from practice entitled Operation in Manual Mode performed at Instituto Nacional de Investigaciones Nucleares (ININ). Later, the behavior of the K{sub eff} was analyzed considering different temperatures in the fuel elements, achieving calculate subsequently the values that best represent the actual reactor operation. Finally, the calculations in the developed model for to obtain the distribution of average flow of thermal, epithermal and fast neutrons in the six new experimental facilities are presented. (Author)

  18. Evaluation of the aptitude for the service of the pool of the TRIGA Mark III reactor of the National Institute of Nuclear Research of Mexico; Evaluacion de la aptitud para el servicio de la piscina del reactor TRIGA Mark III del Instituto Nacional de Investigaciones Nucleares de Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Merino C, J.; Gachuz M, M.; Diaz S, A.; Arganis J, C.; Gonzalez R, C.; Nava G, T.; Medina R, M.J. [Departamento de Sintesis y Caracterizacion de Materiales del ININ, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2001-07-01

    This work describes the evaluation of the structural integrity of the pool of the TRIGA Mark III reactor of the National Institute of Nuclear Research of Mexico, which was realized in July 2001, as an element to determine those actions for preventive and corrective maintenance which owner must do it for a safety and efficient operation of the component in the next years. (Author)

  19. Determination of the energy spectrum of the neutrons in the central thimble of the reactor core TRIGA Mark III; Determinacion del espectro de energia de los neutrones en el dedal central del nucleo del reactor Triga Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Parra M, M. A.

    2014-07-01

    This thesis presents the neutron spectrum measurements inside the core of the TRIGA Mark III reactor at 1 MW power in steady-state, with the bridge placed in the center of the swimming pool, using several metallic threshold foils. The activation detectors are inserted in the Central Thimble of the reactor core, all the foils are irradiated in the same position and irradiation conditions (one by one). The threshold detectors are made of different materials such as: Au{sup 197}, Ni{sup 58}, In{sup 115}, Mg{sup 24}, Al{sup 27}, Fe{sup 58}, Co{sup 59} and Cu{sup 63}, they were selected to cover the full range the energies (10{sup -10} to 20 MeV) of the neutron spectrum in the reactor core. After the irradiation, the activation detectors were measured by means of spectrometry gamma, using a high resolution counting system with a hyper pure Germanium crystal, in order to obtain the saturation activity per target nuclide. The saturation activity is one of the main input data together with the initial spectrum, for the computational code SANDBP (hungarian version of the code SAND-II), which through an iterative adjustment, gives the calculated spectrum. The different saturation activities are necessary for the unfolding method, used by the computational code SANDBP. This research work is very important, since the knowledge of the energetic and spatial distribution of the neutron flux in the irradiation facilities, allows to characterize properly the irradiation facilities, just like, to estimate with a good precision various physics parameters of the reactor such as: neutron fluxes (thermal, intermediate and fast), neutronic dose, neutron activation analysis (NAA), spectral indices (cadmium ratio), buckling, fuel burnup, safety parameters (reactivity, temperature distribution, peak factors). In addition, the knowledge of the already mentioned parameters can give a best use of reactor, optimizing the irradiations requested by the users for their production process or

  20. Neutronic design and comparative characteristics of new pin type control rod for 14-MW TRIGA-SSR reactor

    Energy Technology Data Exchange (ETDEWEB)

    Iorgulis, C.; Truta, C. [Institute for Nuclear Research, 0300 Pitesti (Romania)

    2001-07-01

    This paper presents the structural changes of the control rods (CR-s) which will be done in order to manufacture new ones and therefore to replace the original rods and to increase the present safety features of TRIGA 14 MW reactor in Pitesti. Few years ago two CR-s became inoperable due to the combined effect of welding corrosion, water penetration into the absorbent section of the CR and finally the swelling caused from the high internal pressure of the radiolysis-generated gases (gases which accelerated welding corrosion, water penetration, etc). Although safe reactor operation is not yet affected a decision to redesign a new CR was taken, entirely suitable to the general reactor design. The new CR will use boron carbide (same absorbent as in the original one); this baron carbide will be packed in a different way. A set of 16 Incoloy pins filled with a column of boron carbide pellets, leak-tight welded, will be manufactured. These 16 pins will be mounted in a square array with 5 pins on each side of the square (corner pins being the same far two sides). Neutronic analysis on the preliminary design was done using specific computer codes (WIMS, DFA, and MCNP). Reactivity worth of this new rod would be slight less (8%) than that of the original one, but still with full compensation capacity. Helium release analysis showed that gas pressure in the Incoloy tube after 15 years of normal operation would not exceed 57 ATM. (author)

  1. Cryostat system for investigation on new neutron moderator materials at reactor TRIGA PUSPATI

    Energy Technology Data Exchange (ETDEWEB)

    Dris, Zakaria bin, E-mail: zakariadris@gmail.com [College of Graduate Studies, Universiti Tenaga Nasional (UNITEN), Putrajaya Campus, Jalan IKRAM-UNITEN, 43000 Kajang, Selangor (Malaysia); Centre for Nuclear Energy, Universiti Tenaga Nasional (UNITEN), Putrajaya Campus, Jalan IKRAM-UNITEN, 43000 Kajang, Selangor (Malaysia); Mohamed, Abdul Aziz bin; Hamid, Nasri A. [Centre for Nuclear Energy, Universiti Tenaga Nasional (UNITEN), Putrajaya Campus, Jalan IKRAM-UNITEN, 43000 Kajang, Selangor (Malaysia); Azman, Azraf; Ahmad, Megat Harun Al Rashid Megat; Jamro, Rafhayudi; Yazid, Hafizal [Malaysian Nuclear Agency, Bangi, 43000 Kajang, Selangor (Malaysia)

    2016-01-22

    A simple continuous flow (SCF) cryostat was designed to investigate the neutron moderation of alumina in high temperature co-ceramic (HTCC) and polymeric materials such as Teflon under TRIGA neutron environment using a reflected neutron beam from a monochromator. Cooling of the cryostat will be carried out using liquid nitrogen. The cryostat will be built with an aluminum holder for moderator within stainless steel cylinder pipe. A copper thermocouple will be used as the temperature sensor to monitor the moderator temperature inside the cryostat holder. Initial measurements of neutron spectrum after neutron passing through the moderating materials have been carried out using a neutron spectrometer.

  2. Determination of the irradiation field at the research reactor TRIGA Mainz for BNCT.

    Science.gov (United States)

    Nagels, S; Hampel, G; Kratz, J V; Aguilar, A L; Minouchehr, S; Otto, G; Schmidberger, H; Schütz, C; Vogtländer, L; Wortmann, B

    2009-07-01

    For the application of the BNCT for the excorporal treatment of organs at the TRIGA Mainz, the basic characteristics of the radiation field in the thermal column as beam geometry, neutron and gamma ray energies, angular distributions, neutron flux, as well as absorbed gamma and neutron doses must be determined in a reproducible way. To determine the mixed irradiation field thermoluminescence detectors (TLD) made of CaF(2):Tm with a newly developed energy-compensation filter system and LiF:Mg,Ti materials with different (6)Li concentrations and different thicknesses as well as thin gold foils were used.

  3. Cryostat system for investigation on new neutron moderator materials at reactor TRIGA PUSPATI

    Science.gov (United States)

    Dris, Zakaria bin; Mohamed, Abdul Aziz bin; Hamid, Nasri A.; Azman, Azraf; Ahmad, Megat Harun Al Rashid Megat; Jamro, Rafhayudi; Yazid, Hafizal

    2016-01-01

    A simple continuous flow (SCF) cryostat was designed to investigate the neutron moderation of alumina in high temperature co-ceramic (HTCC) and polymeric materials such as Teflon under TRIGA neutron environment using a reflected neutron beam from a monochromator. Cooling of the cryostat will be carried out using liquid nitrogen. The cryostat will be built with an aluminum holder for moderator within stainless steel cylinder pipe. A copper thermocouple will be used as the temperature sensor to monitor the moderator temperature inside the cryostat holder. Initial measurements of neutron spectrum after neutron passing through the moderating materials have been carried out using a neutron spectrometer.

  4. Inspection with non destructive assay techniques of the aluminium coating of the TRIGA Mark III reactor vat; Inspeccion con tecnicas de ensayos no destructivos del recubrimiento de aluminio de la tina del reactor TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Reyes A, A.I.; Gonzalez M, A.; Castaneda J, G.; Rivera M, H.; Sandoval G, I. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2001-07-01

    In June 2000, the Reactor Department assigned to the Scientific Research Direction of the National Institute of Nuclear Research requested to the Non-destructive Assays Laboratory (LEND), assigned to the Materials Science Management, the inspection and measurement of thickness of the aluminium coating (liner) of the TRIGA Mark III reactor vat with non-destructive assay techniques, due to that the aluminium coating is exposed mainly to undergo slimming on its back side due to corrosion phenomena. Activity that was able to be carried out from april until august 2001. It is worth pointing out that this type of inspection with these techniques was realized by first time. The non-destructive assays (NDA) are techniques which use indirect physical methods for inspecting the sanitation of components in process or in service, for detect lack of continuity or defects which affect their quality or usefulness. The application of those do not alter the physical, chemical, mechanical or dimensional properties of the part subject of inspection. The results of the application of the ultrasound inspection techniques, industrial radiography and penetrating liquids are presented. (Author)

  5. Determination of the neutrons energy spectrum in the central thimble of the reactor core TRIGA Mark III; Determinacion del espectro de energia de los neutrones en el dedal central del nucleo del reactor TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Parra M, M. A.; Luis L, M. A. [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Division de Ciencias Basicas, Av. San Pablo No. 180, Col. Reynosa Tamaulipas, 02200 Mexico D. F. (Mexico); Raya A, R.; Cruz G, H. S., E-mail: roberto.raya@inin.gob.mx [ININ, Departamento del Reactor, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2013-10-15

    This work presents the measurement of the neutrons spectrum in energies in the central thimble of the reactor TRIGA Mark III to a power of 1 MW in stationary state, with the core in the center of the pool. To achieve this objective, several thin sheets were irradiated (one at the time) in the same position of the core. The activation probes were selected in such a way that covered the energy range (1 x 10{sup -10} to 20 MeV) of the neutrons spectrum in the reactor core, for this purpose thin sheets were used of {sup 197}Au, {sup 58}Ni, {sup 115}In, {sup 24}Mg, {sup 27}Al, {sup 58}Fe, {sup 59}Co and {sup 63}Cu. After the irradiation, the high energy gamma emissions of the activated thin sheets were measured by means of gamma spectrometry, in a counting system of high resolution, with a Hyper pure Germanium detector, obtaining this way the activity induced in the thin sheets whose magnitude is proportional to the intensity of the neutrons flow, this activity together to a theoretical initial spectrum are the main entrance data of the computational code SANDBP (Hungarian version of the code Sand-II) that uses the unfolding method for the calculation of the spectrum. (Author)

  6. Measurements of miniature ionization chamber currents in the JSI TRIGA Mark II reactor demonstrate the importance of the delayed contribution to the photon field in nuclear reactors

    Science.gov (United States)

    Radulović, Vladimir; Fourmentel, Damien; Barbot, Loïc; Villard, Jean-François; Kaiba, Tanja; Gašper, Žerovnik; Snoj, Luka

    2015-12-01

    The characterization of experimental locations of a research nuclear reactor implies the determination of neutron and photon flux levels within, with the best achievable accuracy. In nuclear reactors, photon fluxes are commonly calculated by Monte Carlo simulations but rarely measured on-line. In this context, experiments were conducted with a miniature gas ionization chamber (MIC) based on miniature fission chamber mechanical parts, recently developed by the CEA (French Atomic Energy and Alternative Energies Commission) irradiated in the core of the Jožef Stefan Institute TRIGA Mark II reactor in Ljubljana, Slovenia. The aim of the study was to compare the measured MIC currents with calculated currents based on simulations with the MCNP6 code. A discrepancy of around 50% was observed between the measured and the calculated currents; in the latter taking into consideration only the prompt photon field. Further experimental measurements of MIC currents following reactor SCRAMs (reactor shutdown with rapid insertions of control rods) provide evidence that over 30% of the total measured signal is due to the delayed photon field, originating from fission and activation products, which are untreated in the calculations. In the comparison between the measured and calculated values, these findings imply an overall discrepancy of less than 20% of the total signal which is still unexplained.

  7. Simulation of the TRIGA-ININ reactor using EXT-2, in R-{theta} R{theta} and temperature of 20 Centigrade; Simulacion del reactor TRIGA-ININ utilizando EXT-2, en geometria R-{theta} y una temperatura de 20 Centigrados

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar H, F. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    1983-10-15

    The simulation of the TRIGA-ININ reactor, it was beginning considering the more simple case (follower bars equal to fuel elements, cell bar transitory with vacuum, etc.), this it left tuning as the obtained results were observed and it was studied the literature with respect to this reactor, in the following step the followers are considered as standard elements but with 32 grams of U-235 and so forth until reaching to the configuration that is considered definitive. (Author)

  8. Design and construction of the SIPPING for fuels of the TRIGA Mark III reactor; Diseno y construccion del SIPPING para combustibles del reactor TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Castaneda J, G.; Delfin L, A.; Alvarado P, R.; Mazon R, R.; Ortega V, B. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: adl@nuclear.inin.mx

    2003-07-01

    The sipping technique, it has been used by several possessors of nuclear research reactors in its irradiated nuclear fuels, likewise in some fuel storage sites, with the objective of to determine the quantity of radioactivity that the fuel liberates in the means in that it is. The irradiated fuel in storage of some nuclear research reactors, its can have cracks that cross the cladding of the same one, generating the liberation of fission products that its need to determine to maintain safety measures appropriate as much as the fuel as of the facilities where they are. It doesn't exist until now, some method published for the non destructive sipping test technique. Based on that described, the Reactor Department of the National Institute of Nuclear Research, it has designed and built an inspection system of irradiated fuel that it will allow the detection of gassy fission products in site, and solids by means of the measurement of the activity of the Cs-137 contained in water samples. (Author)

  9. Analysis of occupational doses from the CDTN reactor TRIGA IPR-R1 for radiation protection optimization

    Energy Technology Data Exchange (ETDEWEB)

    Maletta, Paulo G.M.; Leal, Marcos A.; Wakabayashi, Tetsuaki, E-mail: pgmm@cdtn.br, E-mail: amgr@cdtn.br, E-mail: leal@cdtn.br, E-mail: tw@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Guimaraes, Adriana M.; Silva, Teogenes A. da, E-mail: silvata@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil). Post Graduation Programme in Sciences and Technology of Radiations

    2011-07-01

    Worker and area monitoring have routinely been done around the CDTN TRIGA IPR-R1 research reactor aiming to optimize and assure radiation protection safety. As part of the implementation of the ALARA program, individual doses from planned practices were analyzed. Personnel dose equivalents, Hp(10), from up to 39 occupationally exposed workers were daily reported during their stay in the restricted area. Measurements were done with a RAD-60 Rados electronic personal dosimeter with a 1 {mu}Sv low detection limit. Results of about 5000 measurements in a year obtained during 2009 and 2010 showed that monthly doses did not exceed 60 {mu}Sv, except in very specific cases of non-routine practices. Results also suggested that values of 40, 100 and 800 {mu}Sv could be adopted as weekly, monthly and annual dose constraints. Considering that measured doses were very small when compared to the 20 mSv/year dose limit, it was concluded that the adoption of the dose constraints was enough to assume the compliance with the ALARA principle and that changes in the routine procedure or in the reactor facility design are not needed. (author)

  10. Simulator of the punctual kinetics of a TRIGA Mark III reactor with power diffuse control in a visual environment; Simulador de la cinetica puntual de un reactor nuclear TRIGA Mark III con control difuso de potencia en un ambiente visual

    Energy Technology Data Exchange (ETDEWEB)

    Perez M, C

    2004-07-01

    The development of a software is presented that simulates the punctual kinetics of a nuclear reactor of investigation model TRIGA Mark III, generating the answers of the reactor low different algorithms of control of power. The user requires a graphic interface that allows him easily interacting with the simulator. To achieve the proposed objective, first the system was modeled in open loop, not using a mathematical model of the consistent reactor in a system of linear ordinary differential equations. For their solution in real time the numeric method of Runge-Kutta-Fehlberg was used. As second phase, it was modeled to the system in closed loop, using for it an algorithm of control of the power based on fuzzy logic. This software has as purpose to help the investigator in the control area who will be able to prove different algorithms for the control of the power of the reactor. This is achieved using the code source in language C, C++, Visual Basic, with which a file is generated. DLL and it is inserted in the simulator. Then they will be able to visualize the results as if their controller had installed in the reactor, analyzing the behavior of all his variables that will be stored in files, for his later study. The easiness of proving these control algorithms in the reactor without necessity to make it physically has important consequences as the saving in the expense of fuel, the not generation of radioactive waste and the most important thing, one doesn't run any risk. The simulator can be used how many times it is necessary until the total purification of the algorithm. This program is the base for following investigation processes, enlarging the capacities and options of the same one. The program fulfills the time of execution satisfactorily, assisting to the necessity of visualizing the behavior in real time of the reactor, and it responds from an effective way to the petitions of changes of power on the part of the user. (Author)

  11. Core Calculation of 1 MWatt PUSPATI TRIGA Reactor (RTP) using Monte Carlo MVP Code System

    Science.gov (United States)

    Karim, Julia Abdul

    2008-05-01

    The Monte Carlo MVP code system was adopted for the Reaktor TRIGA PUSAPTI (RTP) core calculation. The code was developed by a group of researcher of Japan Atomic Energy Agency (JAEA) first in 1994. MVP is a general multi-purpose Monte Carlo code for neutron and photon transport calculation and able to estimate an accurate simulation problems. The code calculation is based on the continuous energy method. This code is capable of adopting an accurate physics model, geometry description and variance reduction technique faster than conventional method as compared to the conventional scalar method. This code could achieve higher computational speed by several factors on the vector super-computer. In this calculation, RTP core was modeled as close as possible to the real core and results of keff flux, fission densities and others were obtained.

  12. Generation of nuclear constants of the TRIGA reactor with the Leopard code; Generacion de constantes nucleares del reactor TRIGA con el codigo Leopard

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar H, F.; Perusquia del C, R. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    1983-09-15

    The reactor core was divided in 12 regions, this was made in function of the composition and temperature and its are: 1) central thimble, 2) B ring, 3) C ring, 4) D ring, 5) E ring, 6) F ring, 7) G ring, 8) superior caps of fuel elements (E.C. s) standard, 9) inferior caps of E.C.'s standard, 10) superior and inferior reflector of the core, 11) lateral reflector and 12) superior and inferior caps of the E.C.'s graphite. Likewise the constants of the followers' of fuel cell, of the empty follower and of the conduits of the gamma camera were obtained. For the obtaining of the enter data of the LEOPARD the dimensions and the composition of the different regions are required, this is consigned in the IT/E21-83 report. (Author)

  13. Adaption of a PIN-diode detector as an online neutron monitor for the thermal column of the TRIGA research reactor.

    Science.gov (United States)

    Schmitz, Tobias; Blaickner, Matthias

    2017-10-01

    A BNCT online neutron monitoring system was tested in a TRIGA reactor, using a silicon PIN-diode with a conversion foil. The setup was tested with different reactor powers at the hot and cold ends of the irradiation channel, using activation foils to compare with measured fluxes. The results demonstrate good reproducibility and show a linear correlation between signal of the PIN-diode and neutron flux at all positions, demonstrating this approach to be suitable for online monitoring of the neutron flux. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Behavior of exposed human lymphocytes to a neutron beam of the Reactor TRIGA Mark III; Comportamiento de linfocitos humanos expuestos a un haz de neutrones del Reactor Triga Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Carbajal R, M. I.; Arceo M, C.; Aguilar H, F.; Guerrero C, C., E-mail: citlali.guerrero@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2012-10-15

    The living beings are permanently exposed to radiations of natural origin: cosmic and geologic, as well as the artificial radiations that come from sources elaborated by the man. The artificial sources have an important use in the medical area. Particularly has been increased the neutrons use due to the effectiveness that they have to damage the cells with regard to other radiation types. The biological indicator of exposition to ionizing radiation more reliable is the chromosomal aberrations study, specifically the dicentrics in human lymphocytes. This test allows, establishing the exposition dose in function of the damage quantity. The dicentrics have a behavior in function of the dose. The calibration curve that describes this behavior is specific for each type of ionizing radiation. In the year 2006 beginning was given to the expositions of human lymphocytes to a neutron beam generated in the reactor TRIGA Mark III of the Instituto Nacional de Investigaciones Nucleares (ININ) in Mexico. Up to 2008 the response dose curve comprised an interval of exposition time of up to 30 minutes. Moreover, the interval between 10 an 20 minutes is included, since was observed that this last is indispensable for the adjustment waited in a lineal model. (Author)

  15. Automated system for neutron activation analysis determination of short lived isotopes at The DOW Chemical Company's TRIGA research reactor

    Science.gov (United States)

    Zieman, J. J.; Rigot, W. L.; Romick, J. D.; Quinn, T. J.; Kocher, C. W.

    1994-12-01

    An automated neutron activation analysis (NAA) system for the determination of short lived isotopes was constructed at The DOW Chemical Company's TRIGA Research Reactor in 1993. The NAA group of the Analytical Sciences Laboratory uses the reactor for thousands of analyses each year and therefore automation is important to achieve and maintain high throughput and precision (productivity). This project is complementary to automation of the long-lived counting facilities (see Romick et al., these Proceedings). Canberra/Nuclear Data Systems DEC-based software and electronics modules and an I/O mounting board are the basic commercial components. A Fortran program on a VAX computer controls I/O via ethernet to an Acquisition Interface Module (AIM). The AIM controls the γ spectrometer modules and is interfaced to a Remote Parallel Interface (RPI) module which controls the pneumatic transfer apparatus with TTL signals to the I/O mounting board. Near-infrared sensors are used to monitor key points in the transfer system. Spectra are acquired by a single HPGe detector mounted on a sliding rail to allow flexible and more reproducible counting geometries than with manual sample handling. The maximum sample size is 8 ml in a heat-sealed two dram vial. The sample vial is nested into a "rabbit" vial for irradiation which can be automatically removed prior to spectrum collection. The system was designed to be used by the reactor operator at the control console without the aid of an additional experimenter. Applications include the determination of selenium and silver in coal and water, fluorine in tetra-fluoro ethylene (TFE) coated membranes, aluminum and titanium in composite materials and trace fluorine in non-chlorinated cleaning solvents. Variable dead time software allows analysis for 77mSe despite high dead times from 16N encountered in samples.

  16. Design, construction, and demonstration of a neutron beamline and a neutron imaging facility at a Mark-I TRIGA reactor

    Science.gov (United States)

    Craft, Aaron E.

    The fleet of research and training reactors is aging, and no new research reactors are planned in the United States. Thus, there is a need to expand the capabilities of existing reactors to meet users' needs. While many research reactors have beam port facilities, the original design of the United States Geological Survey TRIGA Reactor (GSTR) did not include beam ports. The MInes NEutron Radiography (MINER) facility developed by this thesis and installed at the GSTR provides new capabilities for both researchers and students at the Colorado School of Mines. The facility consists of a number of components, including a neutron beamline and beamstop, an optical table, an experimental enclosure and associated interlocks, a computer control system, a multi-channel plate imaging detector, and the associated electronics. The neutron beam source location, determined through Monte Carlo modeling, provides the best mixture of high neutron flux, high thermal neutron content, and low gamma radiation content. A Monte Carlo n-Particle (MCNP) model of the neutron beam provides researchers with a tool for designing experiments before placing objects in the neutron beam. Experimental multi-foil activation results, compared to calculated multi-foil activation results, verify the model. The MCNP model predicts a neutron beamline flux of 2.2*106 +/- 6.4*105 n/cm2-s based on a source particle rate determined from the foil activation experiments when the reactor is operating at a power of 950 kWt with the beam shutter fully open. The average cadmium ratio of the beamline is 7.4, and the L/D of the neutron beam is approximately 200+/-10. Radiographs of a sensitivity indicator taken using both the digital detector and the transfer foil method provide one demonstration of the radiographic capabilities of the new facility. Calibration fuel pins manufactured using copper and stainless steel surrogate fuel pellets provide additional specimens for demonstration of the new facility and offer a

  17. Calculations to Support On-line Neutron Spectrum Adjustment by Measurements with Miniature Fission Chambers in the JSI TRIGA Reactor

    Directory of Open Access Journals (Sweden)

    Kaiba Tanja

    2018-01-01

    Full Text Available Preliminary calculations were performed with the aim to establish optimal experimental conditions for the measurement campaign within the collaboration between the Jožef Stefan Institute (JSI and Commissariat à l’Énergie Atomique et aux Énergies Alternatives (CEA Cadarache. The goal of the project is to additionally characterize the neutron spectruminside the JSI TRIGA reactor core with focus on the measurement epi-thermal and fast part of the spectrum. Measurements will be performed with fission chambers containing different fissile materials (235U, 237Np and 242Pu covered with thermal neutron filters (Cd and Gd. The changes in the detected signal and neutron flux spectrum with and without transmission filter were studied. Additional effort was put into evaluation of the effect of the filter geometry (e.g. opening on the top end of the filter on the detector signal. After the analysis of the scoping calculations it was concluded to position the experiment in the outside core ring inside one of the empty fuel element positions.

  18. Adaptation of triple axis neutron spectrometer for SANS measurements using alumina samples at TRIGA reactor of Bangladesh

    Science.gov (United States)

    Ahmed, F. U.; Kamal, I.; Yunus, S. M.; Datta, T. K.; Azad, A. K.; Zakaria, A. K. M.; Goyal, P. S.

    2005-09-01

    Double crystal method known as Bonse and Hart's technique has been employed to develop small angle neutron scattering (SANS) facility on a triple axis neutron spectrometer at TRIGA Mark II (3 MW) research reactor of Atomic Energy Research Establishment (AERE), Savar, Dhaka, Bangladesh. Two Si(1 1 1) crystals with very small mosaic spread ∼1 min have been used for this purpose. At an incident neutron wavelength of 1.24 Å, this device is useful for SANS in the Q range between 1.6×10 -3 and 10 -1 Å -1. This Q range allows investigating particle sizes and interparticle correlations on a length scale of ∼200 Å. Results of SANS experiments on three alumina (Al 2O 3) samples as performed using above setup are presented. It is seen that Al 2O 3 particles, indeed, scatter neutrons in regions of small angles. It is also seen that scattering is different for different samples showing that it changes with a change in particle size.

  19. Comparison of EPR response of alanine and Gd₂O₃-alanine dosimeters exposed to TRIGA Mainz reactor.

    Science.gov (United States)

    Marrale, M; Schmitz, T; Gallo, S; Hampel, G; Longo, A; Panzeca, S; Tranchina, L

    2015-12-01

    In this work we report some preliminary results regarding the analysis of electron paramagnetic resonance (EPR) response of alanine pellets and alanine pellets added with gadolinium used for dosimetry at the TRIGA research reactor in Mainz, Germany. Two set-ups were evaluated: irradiation inside PMMA phantom and irradiation inside boric acid phantom. We observed that the presence of Gd2O3 inside alanine pellets increases the EPR signal by a factor of 3.45 and 1.24 in case of PMMA and boric acid phantoms, respectively. We can conclude that in the case of neutron beam with a predominant thermal neutron component the addition of gadolinium oxide can significantly improve neutron sensitivity of alanine pellets. Monte Carlo (MC) simulations of both response of alanine and Gd-added alanine pellets with FLUKA code were performed and a good agreement was achieved for pure alanine dosimeters. For Gd2O3-alanine deviations between MC simulations and experimental data were observed and discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Criticality and shielding calculations for containers in dry of spent fuel of TRIGA Mark III reactor of ININ; Calculos de criticidad y blindaje para contenedores en seco de combustible gastado del reactor Triga Mark III del ININ

    Energy Technology Data Exchange (ETDEWEB)

    Barranco R, F.

    2015-07-01

    In this thesis criticality and shielding calculations to evaluate the design of a container of dry storage of spent nuclear fuel generated in research reactors were made. The design of such container was originally proposed by Argentina and Brazil, and the Instituto Nacional de Investigaciones Nucleares (ININ) of Mexico. Additionally, it is proposed to modify the design of this container to store spent fuel 120 that are currently in the pool of TRIGA Mark III reactor, the Nuclear Center of Mexico and calculations and analyzes are made to verify that the settlement of these fuel elements is subcritical limits and dose rates to workers and the general public are not exceeded. These calculations are part of the design criteria for security protection systems in dry storage system (Dss for its acronym in English) proposed by the Nuclear Regulatory Commission (NRC) of the United States. To carry out these calculations simulation codes of Monte Carlo particle transport as MCNPX and MCNP5 were used. The initial design (design 1) 78 intended to store spent fuel with a maximum of 115. The ININ has 120 fuel elements and spent 3 control rods (currently stored in the reactor pool). This leads to the construction of two containers of the original design, but for economic reasons was decided to modify (design 2) to store in a single container. Criticality calculations are performed to 78, 115 and fresh fuel elements 124 within the container, to the two arrangements described in Chapter 4, modeling the three-dimensional geometry assuming normal operating conditions and accident. These calculations are focused to demonstrate that the container will remain subcritical, that is, that the effective multiplication factor is less than 1, in particular not greater than 0.95 (as per specified by the NRC). Spent fuel 78 and 124 within the container, both gamma radiation to neutron shielding calculations for only two cases were simulated. First actinides and fission products generated

  1. TRIGA Mark II nuclear reactor facility. Final report, 1 July 1980--30 June 1995

    Energy Technology Data Exchange (ETDEWEB)

    Ryan, B.C.

    1997-05-01

    This report is a final culmination of activities funded through the Department of Energy`s (DOE) University Reactor Sharing Program, Grant DE-FG02-80ER10273, during the period 1 July 1980 through 30 June 1995. Progress reports have been periodically issued to the DOE, namely the Reactor Facility Annual Reports C00-2082/2219-7 through C00-2082/10723-21, which are contained as an appendix to this report. Due to the extent of time covered by this grant, summary tables are presented. Table 1 lists the fiscal year financial obligations of the grant. As listed in the original grant proposals, the DOE grant financed 70% of project costs, namely the total amount spent of these projects minus materials costs and technical support. Thus the bulk of funds was spent directly on reactor operations. With the exception of a few years, spending was in excess of the grant amount. As shown in Tables 2 and 3, the Reactor Sharing grant funded a immense number of research projects in nuclear engineering, geology, animal science, chemistry, anthropology, veterinary medicine, and many other fields. A list of these users is provided. Out of the average 3000 visitors per year, some groups participated in classes involving the reactor such as Boy Scout Merit Badge classes, teacher`s workshops, and summer internships. A large number of these projects met the requirements for the Reactor Sharing grant, but were funded by the University instead.

  2. Fabrication and testing of a 4-node micro-pocket fission detector array for the Kansas State University TRIGA Mk. II research nuclear reactor

    Science.gov (United States)

    Reichenberger, Michael A.; Nichols, Daniel M.; Stevenson, Sarah R.; Swope, Tanner M.; Hilger, Caden W.; Unruh, Troy C.; McGregor, Douglas S.; Roberts, Jeremy A.

    2017-08-01

    Advancements in nuclear reactor core modeling and computational capability have encouraged further development of in-core neutron sensors. Micro-Pocket Fission Detectors (MPFDs) have been fabricated and tested previously, but successful testing of these prior detectors was limited to single-node operation with specialized designs. Described in this work is a modular, four-node MPFD array fabricated and tested at Kansas State University (KSU). The four sensor nodes were equally spaced to span the length of the fuel-region of the KSU TRIGA Mk. II research nuclear reactor core. The encapsulated array was filled with argon gas, serving as an ionization medium in the small cavities of the MPFDs. The unified design improved device ruggedness and simplified construction over previous designs. A 0.315-in. (8-mm) penetration in the upper grid plate of the KSU TRIGA Mk. II research nuclear reactor was used to deploy the array between fuel elements in the core. The MPFD array was coupled to an electronic support system which has been developed to support pulse-mode operation. Neutron-induced pulses were observed on all four sensor channels. Stable device operation was confirmed by testing under steady-state reactor conditions. Each of the four sensors in the array responded to changes in reactor power between 10 kWth and full power (750 kWth). Reactor power transients were observed in real-time including positive transients with periods of 5, 15, and 30 s. Finally, manual reactor power oscillations were observed in real-time.

  3. A high performance neutron powder diffractometer at 3 MW Triga Mark-II research reactor in Bangladesh

    Energy Technology Data Exchange (ETDEWEB)

    Kamal, I., E-mail: imtiaz-kamal26@yahoo.com; Yunus, S. M., E-mail: yunussm11@yahoo.com; Datta, T. K., E-mail: tk-datta4@yahoo.com; Zakaria, A. K. M.; Das, A. K.; Aktar, S.; Hossain, S. [Institute of Nuclear Science and Technology, Atomic Energy Research Establishment, Ganakbari, Savar, Dhaka (Bangladesh); Berliner, R., E-mail: RB@instrumentationAssociates.com [Instrumentation Associates, Durham, North Carolina (United States); Yelon, W. B., E-mail: yelonwb@hotmail.com [Oak Ridge National Laboratory, Oak Ridge, Tennessee (United States)

    2016-07-12

    A high performance neutron diffractometer called Savar Neutron Diffractometer (SAND) was built and installed at radial beam port-2 of TRIGA Mark II research reactor at AERE, Savar, Dhaka, Bangladesh. Structural studies of materials are being done by this technique to characterize materials crystallograpohically and magnetically. The micro-structural information obtainable by neutron scattering method is very essential for determining its technological applications. This technique is unique for understanding the magnetic behavior in magnetic materials. Ceramic, steel, electronic and electric industries can be benefited from this facility for improving their products and fabrication process. This instrument consists of a Popovicimonochromator with a large linear position sensitive detector array. The monochromator consists of nine blades of perfect single crystal of silicon with 6 mm thickness each. The monochromator design was optimized to provide maximum flux on 3 mm diameter cylindrical sample with a relatively flat angular dependence of resolution. Five different wave lengths can be selected by orienting the crystal at various angles. A sapphire filter was used before the primary collimator to minimize the first neutron. The detector assembly is composed of 15 linear position sensitive proportional counters placed at either 1.1 m or 1.6 m from the sample position and enclosed in a air pad supported high density polythene shield. Position sensing is obtained by charge division using 1-wide NIM position encoding modules (PEM). The PEMs communicate with the host computer via USB. The detector when placed at 1.1 m, subtends 30° (2θ) at each step and covers 120° in 4 steps. When the detector is placed at 1.6 m it subtends 20° at each step and covers 120° in 6 steps. The instrument supports both low and high temperature sample environment. The instrument supports both low and high temperature sample environment. The diffractometer is a state-of-the art technology

  4. A high performance neutron powder diffractometer at 3 MW Triga Mark-II research reactor in Bangladesh

    Science.gov (United States)

    Kamal, I.; Yunus, S. M.; Datta, T. K.; Zakaria, A. K. M.; Das, A. K.; Aktar, S.; Hossain, S.; Berliner, R.; Yelon, W. B.

    2016-07-01

    A high performance neutron diffractometer called Savar Neutron Diffractometer (SAND) was built and installed at radial beam port-2 of TRIGA Mark II research reactor at AERE, Savar, Dhaka, Bangladesh. Structural studies of materials are being done by this technique to characterize materials crystallograpohically and magnetically. The micro-structural information obtainable by neutron scattering method is very essential for determining its technological applications. This technique is unique for understanding the magnetic behavior in magnetic materials. Ceramic, steel, electronic and electric industries can be benefited from this facility for improving their products and fabrication process. This instrument consists of a Popovicimonochromator with a large linear position sensitive detector array. The monochromator consists of nine blades of perfect single crystal of silicon with 6mm thickness each. The monochromator design was optimized to provide maximum flux on 3mm diameter cylindrical sample with a relatively flat angular dependence of resolution. Five different wave lengths can be selected by orienting the crystal at various angles. A sapphire filter was used before the primary collimator to minimize the first neutron. The detector assembly is composed of 15 linear position sensitive proportional counters placed at either 1.1 m or 1.6 m from the sample position and enclosed in a air pad supported high density polythene shield. Position sensing is obtained by charge division using 1-wide NIM position encoding modules (PEM). The PEMs communicate with the host computer via USB. The detector when placed at 1.1 m, subtends 30˚ (2θ) at each step and covers 120˚ in 4 steps. When the detector is placed at 1.6 m it subtends 20˚ at each step and covers 120˚ in 6 steps. The instrument supports both low and high temperature sample environment. The instrument supports both low and high temperature sample environment. The diffractometer is a state-of-the art technology

  5. Decontamination and decommissioning project of the TRIGA Mark-2 and 3 research reactors

    Energy Technology Data Exchange (ETDEWEB)

    Jung, K. J.; Baik, S. T.; Chung, U. S.; Jung, K. H.; Park, S. K.; Lee, B. J.; Kim, J. K.; Yang, S. H

    2000-01-01

    During the review on the decommissioning plan and environmental impact assessment report by the KINS, the number of the inquired items were two hundred and fifty one, and the answers were made and sent until September 10, 1999, as the screened review results were reported to Ministry of Science and Technology(MOST) in December 14, 1999, all the reviews on the licence were over. Radioactive liquid wastes of 400 tons generated during the operation of the research reactors including reactor vessels are stored in the facility of the research reactor 1 and 2. Those liquid wastes have the low-level-radioactivity which can be discharged to the surroundings, but was wholly treated to be vaporized naturally by means of the increased numbers of the natural vaporization disposal facilities with the annual capacity of 200 tons for the purpose of the minimized environmental contamination.

  6. Optimised k0-instrumental neutron activation method using the TRIGA MARK I IPR-R1 reactor at CDTN/CNEN, Belo Horizonte, Brazil

    Science.gov (United States)

    Menezes, M. Â. B. C.; Jaćimović, R.

    2006-08-01

    The Nuclear Technology Development Centre/Brazilian Commission for Nuclear Energy, CDTN/CNEN, is the only Brazilian Institution to apply the k0-standardisation method of instrumental neutron activation technique determining elements using its own nuclear reactor, TRIGA MARK I IPR-R1. After changes in the reactor core configuration, the reactor neutron flux distribution in typical irradiation channels had to be updated, as well as the parameters f and α, needed to apply the k0-method of neutron activation analysis. The neutron flux distribution in the rotary rack was evaluated through the specific count rate of 198Au and the parameters f and α, were determined in five selected channels applying the "Cd-ratio for multi-monitor" method, using a set of Al-(0.1%)Au and Zr (99.8%) monitors. Several reference materials were analysed, indicating the effectiveness of the improved method.

  7. Main activities carried out for the conversion of the reactor core TRIGA, from HEU 8.5/70 / LEU 8.5/20 to LEU 30/20; Principales actividades llevadas a cabo para la conversion del nucleo del reactor TRIGA, de HEU 8.5/70 / LEU 8.5/20 a LEU 30/20

    Energy Technology Data Exchange (ETDEWEB)

    Flores C, J., E-mail: jorge.floresc@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2012-10-15

    In agreement with the policies of the global initiative of threats reduction (GTRI), Mexico committed that inside the reduction program of the fuel enrichment in research and test reactors (RERTR), the conversion of the core reactor TRIGA (in the nuclear centre) would be made, to use solely fuel with low enrichment ({<=} 20% U{sup 235}). To support to the execution of this commitment, a series of accords and agreements were established. The Project Agreement and Supply among the IAEA, the United States of America and Mexico was the more relevant. In this work the main activities carried out in the Instituto Nacional de Investigaciones Nucleares (ININ) with this purpose are presented. (Author)

  8. Neutron dosimetry and damage calculations for the TRIGA MARK-II reactor in Vienna

    Science.gov (United States)

    Weber, H. W.; Böck, H.; Unfried, E.; Greenwood, L. R.

    1986-02-01

    In order to improve the source characterization of the reactor, especially for recent irradiation experiments in the central irradiation thimble, neutron activation experiments were made on 16 nuclides and the neutron flux spectrum was adjusted using the computer code STAY'SL. The results for the total, thermal and fast neutron flux density at a reactor power of 250 kW are as follows: 2.1 × 10 17, 6.1 × 10 16 ( E 0.1 MeV) and 4.0 × 10 16 ( E > 1 MeV) m -2 s -1. respectively. Calculated damage energy cross sections and gas production rates are presented for selected elements.

  9. Decontamination and decommissioning project of the TRIGA mark - 2 and 3 research reactors

    Energy Technology Data Exchange (ETDEWEB)

    Jung, K. J.; Baik, S. T.; Chung, U. S.; Jung, K. H.; Park, S. K.; Kim, J. K.; Lee, D. G.; Kim, H. R.; Lee, B. J.; Yang, S. H.

    2001-01-15

    The decommissioning license for KRR (Korea Research Reactor) 1 and 2 was issued Nov. 23, 2000. The atmospheric stability on the KRR site was evaluated using the meteorological data measured at the site. From the results of this evaluation, the population dose was evaluated for the public who lives at the periphery of the site. The Radiation Safety Management Guideline was developed and it will be used as a base line making Radiation Safety Management Procedure. The container was specially designed and manufactured for the storing of low level radioactive solid waste arising from the D and D activities. Firstly, the 50 containers were completely manufactured.

  10. Development and methodology of level 1 probability safety assessment at PUSPATI TRIGA Reactor

    Science.gov (United States)

    Maskin, Mazleha; Tom, Phongsakorn Prak; Lanyau, Tonny Anak; Brayon, Fedrick Charlie Matthew; Mohamed, Faizal; Saad, Mohamad Fauzi; Ismail, Ahmad Razali; Abu, Mohamad Puad Haji

    2014-02-01

    As a consequence of the accident at the Fukushima Dai-ichi Nuclear Power Plant in Japan, the safety aspects of the one and only research reactor (31 years old) in Malaysia need be reviewed. Based on this decision, Malaysian Nuclear Agency in collaboration with Atomic Energy Licensing Board and Universiti Kebangsaan Malaysia develop a Level-1 Probability Safety Assessment on this research reactor. This work is aimed to evaluate the potential risks of incidents in RTP and at the same time to identify internal and external hazard that may cause any extreme initiating events. This report documents the methodology in developing a Level 1 PSA performed for the RTP as a complementary approach to deterministic safety analysis both in neutronics and thermal hydraulics. This Level-1 PSA work has been performed according to the procedures suggested in relevant IAEA publications and at the same time numbers of procedures has been developed as part of an Integrated Management System programme implemented in Nuclear Malaysia.

  11. Validation of CENDL and JEFF evaluated nuclear data files for TRIGA calculations through the analysis of integral parameters of TRX and BAPL benchmark lattices of thermal reactors

    Energy Technology Data Exchange (ETDEWEB)

    Uddin, M.N. [Department of Physics, Jahangirnagar University, Dhaka (Bangladesh); Sarker, M.M. [Reactor Physics and Engineering Division, Institute of Nuclear Science and Technology, Atomic Energy Research Establishment, Savar, GPO Box 3787, Dhaka 1000 (Bangladesh); Khan, M.J.H. [Reactor Physics and Engineering Division, Institute of Nuclear Science and Technology, Atomic Energy Research Establishment, Savar, GPO Box 3787, Dhaka 1000 (Bangladesh)], E-mail: jahirulkhan@yahoo.com; Islam, S.M.A. [Department of Physics, Jahangirnagar University, Dhaka (Bangladesh)

    2009-10-15

    The aim of this paper is to present the validation of evaluated nuclear data files CENDL-2.2 and JEFF-3.1.1 through the analysis of the integral parameters of TRX and BAPL benchmark lattices of thermal reactors for neutronics analysis of TRIGA Mark-II Research Reactor at AERE, Bangladesh. In this process, the 69-group cross-section library for lattice code WIMS was generated using the basic evaluated nuclear data files CENDL-2.2 and JEFF-3.1.1 with the help of nuclear data processing code NJOY99.0. Integral measurements on the thermal reactor lattices TRX-1, TRX-2, BAPL-UO{sub 2}-1, BAPL-UO{sub 2}-2 and BAPL-UO{sub 2}-3 served as standard benchmarks for testing nuclear data files and have also been selected for this analysis. The integral parameters of the said lattices were calculated using the lattice transport code WIMSD-5B based on the generated 69-group cross-section library. The calculated integral parameters were compared to the measured values as well as the results of Monte Carlo Code MCNP. It was found that in most cases, the values of integral parameters show a good agreement with the experiment and MCNP results. Besides, the group constants in WIMS format for the isotopes U-235 and U-238 between two data files have been compared using WIMS library utility code WILLIE and it was found that the group constants are identical with very insignificant difference. Therefore, this analysis reflects the validation of evaluated nuclear data files CENDL-2.2 and JEFF-3.1.1 through benchmarking the integral parameters of TRX and BAPL lattices and can also be essential to implement further neutronic analysis of TRIGA Mark-II research reactor at AERE, Dhaka, Bangladesh.

  12. GEANT4 used for neutron beam design of a neutron imaging facility at TRIGA reactor in Morocco

    Science.gov (United States)

    Ouardi, A.; Machmach, A.; Alami, R.; Bensitel, A.; Hommada, A.

    2011-09-01

    Neutron imaging has a broad scope of applications and has played a pivotal role in visualizing and quantifying hydrogenous masses in metallic matrices. The field continues to expand into new applications with the installation of new neutron imaging facilities. In this scope, a neutron imaging facility for computed tomography and real-time neutron radiography is currently being developed around 2.0MW TRIGA MARK-II reactor at Maamora Nuclear Research Center in Morocco (Reuscher et al., 1990 [1]; de Menezes et al., 2003 [2]; Deinert et al., 2005 [3]). The neutron imaging facility consists of neutron collimator, real-time neutron imaging system and imaging process systems. In order to reduce the gamma-ray content in the neutron beam, the tangential channel was selected. For power of 250 kW, the corresponding thermal neutron flux measured at the inlet of the tangential channel is around 3×10 11 ncm 2/s. This facility will be based on a conical neutron collimator with two circular diaphragms with diameters of 4 and 2 cm corresponding to L/D-ratio of 165 and 325, respectively. These diaphragms' sizes allow reaching a compromise between good flux and efficient L/D-ratio. Convergent-divergent collimator geometry has been adopted. The beam line consists of a gamma filter, fast neutrons filter, neutron moderator, neutron and gamma shutters, biological shielding around the collimator and several stages of neutron collimator. Monte Carlo calculations by a fully 3D numerical code GEANT4 were used to design the neutron beam line ( http://www.info.cern.ch/asd/geant4/geant4.html[4]). To enhance the neutron thermal beam in terms of quality, several materials, mainly bismuth (Bi) and sapphire (Al 2O 3) were examined as gamma and neutron filters respectively. The GEANT4 simulations showed that the gamma and epithermal and fast neutron could be filtered using the bismuth (Bi) and sapphire (Al 2O 3) filters, respectively. To get a good cadmium ratio, GEANT 4 simulations were used to

  13. Proceedings of the 4. World TRIGA Users Conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-10-29

    This document gathers 30 presentations given at the 2008 Conference of the World TRIGA reactor Users. Most presentations are in the form of slides only, and few ones have an additional summary or are presented as an article only. All aspects of TRIGA-type reactors are approached, from upgrading to decommissioning, from radiotherapy to isotope production, from research program management to training, etc.

  14. The Design of a Prompt Gamma Neutron Activation Analysis Beam for BNCT Purpose at the TRIGA Mark II Reactor in Pavia

    Energy Technology Data Exchange (ETDEWEB)

    Stella, S.; Bazani, A.; Ballarini, F.; Bortolussi, S.; Protti, N.; Altieri, S. [Department of Nuclear and Theoretical Physics, University of Pavia (Italy); Istituto Nazionale di Fisica Nucleare (INFN), Section of Pavia (Italy); Bruschi, P. [Department of Nuclear and Theoretical Physics, University of Pavia (Italy)

    2011-07-01

    In preclinical and clinical Boron Neutron Capture Therapy studies the knowledge of the amount of {sup 10}B in blood and tissues is very important. The boron concentration measurements method used in Pavia (Italy) is based on the charged particles spectrometry of thin tissue cuts irradiated in the Thermal Column of the TRIGA reactor of the University. In order to perform measurements in biological liquids such as blood and urine, or in other tissue that cannot be cut in slices, a Prompt Gamma Neutron Activation Analysis (PGNAA) facility is being designed, which measures {sup 10}B concentration detecting the prompt gamma from boron nuclear capture reaction. At the TRIGA reactor in Pavia, there are four horizontal channels, potentially available for PGNAA. The choice of the suitable channel, and the design of its configuration, were achieved using the Monte Carlo neutron transport code MCNP4c2. To perform the simulations, an input code already validated, describing the reactor structure and the neutron source, was used. The calculations were implemented applying non-analog techniques for the neutron transport, that are necessary to obtain a sufficient statistic in every positions along the channel and especially at its end. The selection of the channel for PGNAA installation was carried out by comparing the simulated fluxes obtained in the different channels at the present configuration. The channel shielded by the core reflector was chosen, because the graphite lowers the fast component of the neutrons, with no need to insert additional material in the facility. The thermal flux at its end is 1.7 x 10{sup 8} n/cm{sup 2} s with thermal-to-total neutron flux ratio around 0.8. Subsequently a bismuth block for gamma radiation shielding and blocks of single crystal sapphire as filter for fast neutron component were inserted in the channel. Other components of the facility that are under study are a collimator and the beam catcher. (author)

  15. Chromosome aberrations induced in human lymphocytes by U-235 fission neutrons: I. Irradiation of human blood samples in the "dry cell" of the TRIGA Mark II nuclear reactor.

    Science.gov (United States)

    Fajgelj, A; Lakoski, A; Horvat, D; Remec, I; Skrk, J; Stegnar, P

    1991-11-01

    A set-up for irradiation of biological samples in the TRIGA Mark II research reactor in Ljubljana is described. Threshold activation detectors were used for characterisation of the neutron flux, and the accompanying gamma dose was measured by TLDs. Human peripheral blood samples were irradiated "in vitro" and biological effects evaluated according to the unstable chromosomal aberrations induced. Biological effects of two types of cultivation of irradiated blood samples, the first immediately after irradiation and the second after 96 h storage, were studied. A significant difference in the incidence of chromosomal aberrations between these two types of samples was obtained, while our dose-response curve fitting coefficients alpha 1 = (7.71 +/- 0.09) x 10(-2) Gy-1 (immediate cultivation) and alpha 2 = (11.03 +/- 0.08) x 10(-2) Gy-1 (96 h delayed cultivation) are in both cases lower than could be found in the literature.

  16. Measurement of DNA damage induced by irradiation with gamma-rays from a TRIGA Mark II research reactor in human cells using Fast Micromethod.

    Science.gov (United States)

    Hassanein, Hamdy; Müller, Claudia I; Schlösser, Dietmar; Kratz, Karl-Ludwig; Senyuk, Olga F; Schröder, Heinz C

    2002-06-01

    The Fast Micromethod is a novel quick and convenient microplate assay for determination of DNA single-strand breaks. This method measures the rate of unwinding of cellular DNA upon exposure to alkaline conditions using a fluorescent dye which preferentially binds to double-stranded DNA. Here we applied this method to determine the levels of DNA single-strand breaks in HeLa cells induced by y-irradiation deriving from fission isotopes and activation products at the TRIGA Mark II research reactor in Mainz. An increased strand scission factor (SSF) value, which is indicative for DNA damage, was found at doses of 1 Gy and higher. A similar increase in SSF value, which further increased in a dose-dependent manner, was found in human peripheral blood mononuclear cells after irradiation with 6 MV X-rays from a linear accelerator to give a total exposure of 0.5 to 10 Gy.

  17. Feasibility study of the university of Utah TRIGA reactor power upgrade - part II: Thermohydraulics and heat transfer study in respect to cooling system requirements and design

    Directory of Open Access Journals (Sweden)

    Babitz Philip

    2013-01-01

    Full Text Available The thermodynamic conditions of the University of Utah's TRIGA Reactor were simulated using SolidWorks Flow Simulation, Ansys, Fluent and PARET-ANL. The models are developed for the reactor's currently maximum operating power of 90 kW, and a few higher power levels to analyze thermohydraulics and heat transfer aspects in determining a design basis for higher power including the cost estimate. It was found that the natural convection current becomes much more pronounced at higher power levels with vortex shedding also occurring. A departure from nucleate boiling analysis showed that while nucleate boiling begins near 210 kW it remains in this state and does not approach the critical heat flux at powers up to 500 kW. Based on these studies, two upgrades are proposed for extended operation and possibly higher reactor power level. Together with the findings from Part I studies, we conclude that increase of the reactor power is highly feasible yet dependable on its purpose and associated investments.

  18. Dose calculation in biological samples in a mixed neutron-gamma field at the TRIGA reactor of the University of Mainz.

    Science.gov (United States)

    Schmitz, Tobias; Blaickner, Matthias; Schütz, Christian; Wiehl, Norbert; Kratz, Jens V; Bassler, Niels; Holzscheiter, Michael H; Palmans, Hugo; Sharpe, Peter; Otto, Gerd; Hampel, Gabriele

    2010-10-01

    To establish Boron Neutron Capture Therapy (BNCT) for non-resectable liver metastases and for in vitro experiments at the TRIGA Mark II reactor at the University of Mainz, Germany, it is necessary to have a reliable dose monitoring system. The in vitro experiments are used to determine the relative biological effectiveness (RBE) of liver and cancer cells in our mixed neutron and gamma field. We work with alanine detectors in combination with Monte Carlo simulations, where we can measure and characterize the dose. To verify our calculations we perform neutron flux measurements using gold foil activation and pin-diodes. Material and methods. When L-α-alanine is irradiated with ionizing radiation, it forms a stable radical which can be detected by electron spin resonance (ESR) spectroscopy. The value of the ESR signal correlates to the amount of absorbed dose. The dose for each pellet is calculated using FLUKA, a multipurpose Monte Carlo transport code. The pin-diode is augmented by a lithium fluoride foil. This foil converts the neutrons into alpha and tritium particles which are products of the (7)Li(n,α)(3)H-reaction. These particles are detected by the diode and their amount correlates to the neutron fluence directly. Results and discussion. Gold foil activation and the pin-diode are reliable fluence measurement systems for the TRIGA reactor, Mainz. Alanine dosimetry of the photon field and charged particle field from secondary reactions can in principle be carried out in combination with MC-calculations for mixed radiation fields and the Hansen & Olsen alanine detector response model. With the acquired data about the background dose and charged particle spectrum, and with the acquired information of the neutron flux, we are capable of calculating the dose to the tissue. Conclusion. Monte Carlo simulation of the mixed neutron and gamma field of the TRIGA Mainz is possible in order to characterize the neutron behavior in the thermal column. Currently we also

  19. The Implementation of an Integrated Management System for TRIGA Research Reactor at LENA (Laboratory of Applied Nuclear Energy) - University of Pavia (Italy) -

    Energy Technology Data Exchange (ETDEWEB)

    Cagnazzo, M.; Tigliole, A. Borio Di; Magrotti, G.; Manera, S.; Marchetti, F.; Prata, M.; Salvini, A. [Laboratory of Applied Nuclear Energy (LENA), University of Pavia (Italy); Giordano, M. [Innovation and Management Systems Division, University of Pavia (Italy); Boogaard, J.P.; Bradley, E.; Vincze, P. [International Atomic Energy Agency (IAEA), Vienna (Austria)

    2011-07-01

    The Laboratory of Applied Nuclear Energy ('LENA') is an Interdepartmental Research Centre of the University of Pavia which operate, among other facilities, a 250 kW TRIGA Mark II Research Nuclear Reactor. The reactor is at the disposal of researchers from Pavia University and of other users, both public and private, for research activities, training and education and other services. The Centre itself carries out research and training activities and provides services for private enterprises, encouraging the transfer of the results of nuclear technology research to the production system, including the education and training of specialists in nuclear technology. The prerequisite for the management of the reactor is the satisfaction of all stakeholders requirements, among which safety constraints, efficiency and effectiveness in the delivery of the services. In order to continuously improve the safety and quality of reactor management and the accomplishment of the stakeholder requirements, LENA decided to implement an Integrated Management System in accordance with International Standard ISO 9001:2008. This choice allowed to satisfy both national and international compulsory requirements (i.e. safe reactor operation and maintenance) and typical ISO 9001 requirements (as e.g. continuous improvement, users/stakeholders care and satisfaction). In addition, through this systematic and graded approach, that led to the standardization of all processes involved in reactor operation and maintenance, all the aspects of the reactor management mentioned in the IAEA publication The Management System for Facilities and Activities (IAEA Safety Standards Series No. GS-R-3) were also satisfied. This publication, in facts, provides a guidance for establishing, implementing, assessing and continually improving a management system for facilities and activities that integrates safety, health, environmental, security, quality and economic elements. (author)

  20. Effects of Cooling Fluid Flow Rate on the Critical Heat Flux and Flow Stability in the Plate Fuel Type 2 MW TRIGA Reactor

    Directory of Open Access Journals (Sweden)

    H. P. Rahardjo

    2017-12-01

    Full Text Available The conversion program of the 2 MW TRIGA reactor in Bandung consisted of the replacement of cylindrical fuel (produced by General Atomic with plate fuel (produced by BATAN. The replacement led into the change of core cooling process from upward natural convection type to downward forced convection type, and resulted in different thermohydraulic safety criteria, such as critical heat flux (CHF limit, boiling limit, and cooling fluid flow stability. In this paper, a thermohydraulic safety analysis of the converted TRIGA reactor is presented by considering the Dynamic Nucleate Boiling Ratio (DNBR criterion, Onset Nucleate Boiling Ratio (ONBR limit, and cooling fluid flow stability at various cooling fluid flow rate.The numerical analyses were performed using the HEATHYD program on the hottest channels of reactor core.The combination of heat transfer and fluid flow analysis were conducted for reactor operation at 2 MW with 20 fuel element bundles and four control rod bundles. Incoming fluid flow to the cooling channel was fixed at 44.5 °C temperature and 1.9970 bar pressure, and its flow rate was varied from 1.25 to 3.5 m3/h. By inputting these values, as well as the total power of fuel elements per bundle, the wall temperature distribution of the plate fuel element, cooling fluid temperature distribution, and pressure losses in the channels were obtained for the analysis of CHF limit, boiling limit, and flow stability. It was shown that no boiling occurred for the cooling fluid flow rate range of 2.4 to 3.5 m3/h, and even at the cooling fluid flow rate of 1.25 m3/h where some bubbles occurred, the DNBR was higher than the critical limit (more than 23 while the flow stability criterion in some channels were slightly less than 1 (unstable. At the cooling fluid flow rate of 1.4 m3/h, however, the flow became stable in all channel.

  1. Dose estimation in B16 tumour bearing mice for future irradiation in the thermal column of the TRIGA reactor after B/Gd/LDL adduct infusion.

    Science.gov (United States)

    Protti, N; Ballarini, F; Bortolussi, S; Bruschi, P; Stella, S; Geninatti, S; Alberti, D; Aime, S; Altieri, S

    2011-12-01

    To test the efficacy of a new (10)B-vector compound, the B/Gd/LDL adduct synthesised at Torino University, in vivo irradiations of murine tumours are in progress at the TRIGA Mark II reactor of the Pavia University. A localised B16 melanoma tumour is generated in C57BL/6 mice and subsequently infused with the adduct. During the irradiation, the mouse will be put in a shield to protect the whole body except the tumour in the back-neck area. To optimise the treatment set-up, MCNP simulations were performed. A very simplified mouse model was built using MCNP geometry capabilities, as well as the geometry of the shield made of 99% (10)B enriched boric acid. A hole in the shield is foreseen in correspondence of the back-neck region. Many configurations of the shield were tested in terms of neutron flux, dose distribution and mean induced activity in the tumour region and in the radiosensitive organs of the mouse. In the final set-up, up to five mice can be treated simultaneously in the reactor thermal column and the neutron fluence in the tumour region for 10 min of irradiation is of about 5×10(12) cm(-2). Copyright © 2011 Elsevier Ltd. All rights reserved.

  2. Design, construction and implementation of two redundant circuits of the actuation logic of the protection system of the new control console of TRIGA Mark III reactor of ININ; Diseno, construccion e implementacion de dos circuitos redundantes de la logica de actuacion del sistema de proteccion de la nueva consola de control del reactor Triga Mark III del ININ

    Energy Technology Data Exchange (ETDEWEB)

    Celestino M, E.

    2016-07-01

    The Instituto Nacional de Investigaciones Nucleares (ININ) in Mexico has a nuclear reactor type TRIGA Mark III, which was put into operation in 1968. The reactor is used for staff training, radioisotope production, and for research projects of different areas. Over time and due to advances constantly has the electronics industry, maintenance of electronic systems is complicated because basically sometimes components that are no longer manufactured or no longer exist in the market, making it necessary to create projects required modernization. This is the case of the TRIGA reactor of ININ, so the Department of Automation and Instrumentation ININ is undertaking a new project to update the reactor control console. Systems that make up a nuclear reactor protection system (Ps) is relevant, since it is responsible for generating the necessary steps to shut down the reactor to an event of uncertainty which could affect the operators or the installation own actions. As part of the renovation project, this study design is presented to update the Logic of Action (La) of the Ps, whose final design must meet the requirements or specifications set by users and or regulations applicable to nuclear research reactors. One of the requirements established for the proposed new design La, is that it must be implemented with components and devices manufactured with latest technologies, and readily available on the market. The design which is operating currently uses TTL logic whose components are no longer available in the market, so for the new design you decide to use programmable circuits, and specifically, the CPLDs called (by the acronym Complex Programmable Logic Device). These CPLDs are electronic devices that solve complex logic equations and meeting the requirements of functionality and modernity for the new design of the La. In this work the criteria used for the selection of the CPLDs considering the availability and ease of software and hardware to use, and the design and

  3. Validation of absolute axial neutron flux distribution calculations with MCNP with 197Au(n,γ)198Au reaction rate distribution measurements at the JSI TRIGA Mark II reactor.

    Science.gov (United States)

    Radulović, Vladimir; Štancar, Žiga; Snoj, Luka; Trkov, Andrej

    2014-02-01

    The calculation of axial neutron flux distributions with the MCNP code at the JSI TRIGA Mark II reactor has been validated with experimental measurements of the (197)Au(n,γ)(198)Au reaction rate. The calculated absolute reaction rate values, scaled according to the reactor power and corrected for the flux redistribution effect, are in good agreement with the experimental results. The effect of different cross-section libraries on the calculations has been investigated and shown to be minor. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. Calculations of dose distributions in the lungs of a rat model irradiated in the thermal column of the TRIGA reactor in Pavia.

    Science.gov (United States)

    Protti, N; Bortolussi, S; Stella, S; Gadan, M A; De Bari, A; Ballarini, F; Bruschi, P; Ferrari, C; Clerici, A M; Zonta, C; Bakeine, J G; Dionigi, P; Zonta, A; Altieri, S

    2009-07-01

    To test the possibility to apply boron neutron capture therapy (BNCT) to lung tumors, some rats are planned to be irradiated in the thermal column of the TRIGA reactor of the University of Pavia. Before the irradiation, lung metastases will be induced in BDIX rats, which will be subsequently infused with boronophenylalanine (BPA). During the irradiation, the rats will be positioned in a box designed to shield the whole animal except the thorax area. In order to optimize the irradiation set-up and to design a suitable shielding box, a set of calculations were performed with the MCNP Monte Carlo transport code. A rat model was constructed using the MCNP geometry capabilities and was positioned in a box with walls filled with lithium carbonate. A window was opened in front of the lung region. Different shapes of the holder and of the window were tested and analyzed in terms of the dose distribution obtained in the lungs and of the dose absorbed by the radiosensitive organs in the rat. The best configuration of the holder ensures an almost uniform thermal neutron flux inside the lungs (Phi(max)/Phi(min)=1.5), an irradiation time about 10 min long, to deliver at least 40 Gy(w) to the tumor, a mean lung dose of 5.9+/-0.4 Gy(w), and doses absorbed by all the other healthy tissues below the tolerance limits.

  5. 3. world TRIGA users conference. Papers and abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    The Conference is focused on TRIGA reactors operation and applications. The main topics are: use of the reactor as a research tool; inspection of spent fuel elements; integrity of fuel rods cladding checks; evaluation of corrosion of aluminum-base fuel cladding materials; Pitting behavior of Aluminum alloys; Monte Carlo simulation of TRIGA: reactivity worth, burnup, flux and power; irradiation facilities; thermal hydraulics analyses etc.

  6. Support to the elaboration of the engineering of detail, configuration and programming of the control system of heat removal of the TRIGA Mark III reactor; Apoyo a la elaboracion de la ingenieria de detalle, configuracion y programacion del sistema de control de remocion de calor del reactor Triga Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Diaz G, C. A.

    2016-07-01

    Nowadays, the peaceful and responsible use of nuclear energy in Mexico is of great importance and contributes to economic, social, scientist and technologic development in the country, highlighting the Instituto Nacional de Investigaciones Nucleares (ININ) and the Nuclear Power Plant of Laguna Verde as one of the most important dependences. Among the main facilities and laboratories of ININ is the Nuclear Research Reactor TRIGA Mark III, this is a pool type reactor with mobile core, cooled and moderated by light water and a flow of 1013 n/cm{sup 2}/sec. Due to the technological obsolescence is a growing problem that threatens the information, operation and/or efficacy of elements of control and safety systems of the reactor, these must be changed each time more frequently. In the modernization of reactor was used a Modicon M340 programmable logic control (PLC) and a Twido PLC for the control of heat removal system (Primary Cooling System (PCS) and Secondary Cooling System (SCS) respectively), this because the PLC has proven to be safe and effective devices, addition to reduce the wiring elements and increase the possibilities of performance and design of the digital control console. This document shows and describes the elements of heat removal system (PCS and SCS), and the signals and signal types that such items send or received by the PLC, likewise, is indicated the methodology used to develop the applications for the control of the Primary Cooling System and Secondary Cooling System, beginning with the PLC design, the development of PLC plans and the control logic, and finally, the simulation and debugging of applications on Unity Pro and Twido Suite. All this in compliance with the safety standards to nuclear research reactors (NS-R-4), the rules of industrial programming (IEC 61131-3), and the reactor operating limits postulated in the safety report and the software assurance system used in the ININ. (Author)

  7. Nuclear and radiological safety in the substitution process of the fuel HEU to LEU 30/20 in the Reactor TRIGA Mark III of the ININ; Seguridad nuclear y radiologica en el proceso de sustitucion del combustible HEU a LEU 30/20 en el Reactor TRIGA Mark III del Instituto Nacional de Investigaciones Nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez G, J., E-mail: jaime.hernandez@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2012-10-15

    Inside the safety initiative in the international ambit, with the purpose of reducing the risks associated with the use of high enrichment nuclear fuels (HEU) for different proposes to the peaceful uses of the nuclear energy, Mexico contributes by means of the substitution of the high enrichment fuel HEU for low enrichment fuel LEU 30/20 in the TRIGA Mark III Reactor, belonging to Instituto Nacional de Investigaciones Nucleares (ININ). The conversion process was carried out by means of the following activities: analysis of the proposed core, reception and inspection of the fuel LEU 30/20, the discharge of the fuels of the mixed reactor core, shipment of the fuels HEU fresh and irradiated to the origin country, reload activities with the fuels LEU 30/20 and parameters measurement of the core operation. In order to maintaining the personnel's integrity and infrastructure associated to the Reactor, during the whole process the measurements of nuclear and radiological safety were controlled to detail, in execution with the license requirements of the installation. This work describes the covering activities and radiological inspections more relevant, as well as the measurements of radiological control implemented with base in the estimate of the equivalent dose of the substitution process. (Author)

  8. Research with Neutrons at the TRIGA Mainz

    Energy Technology Data Exchange (ETDEWEB)

    Hampel, Gabriele [University of Mainz, Fritz-Strassmann-Weg 2, D-55128 Mainz (Germany)

    2008-10-29

    The TRIGA Mark II reactor at the Institut fuer Kernchemie of the Johannes Gutenberg-Universitaet in Mainz became first critical on August 3, 1965 and is still intensively used for basic research, applied science and educational purposes. Considering the past and future operation schedule and the low burn-up of the fuel elements ({approx}4 g {sup 235}U/a), the reactor can be operated for at least the next decade taking into account the fresh fuel elements on stock and without changing spent fuels. The operation of the TRIGA Mainz has been extended very recently until the year 2020. The TRIGA Mainz can be operated in the steady state mode with a maximum power of 100 kWth and in the pulse mode with a peak power of 250 MWth. Until now, more than 16600 pulses have been carried out without any fuel failure. For irradiations the TRIGA Mainz has a central experimental tube, three pneumatic transfer systems and a rotary specimen rack with 40 positions which allows the irradiation of 80 samples at the same time. In addition, the TRIGA Mainz includes four horizontal beam ports penetrating the concrete shielding and extending inside the pool towards the reflector. A graphite thermal column provides a source of well-thermalized neutrons suitable for physical research or biological and medical irradiations. Important projects for the future of the TRIGA Mainz are the production of ultracold neutrons (UCN) and experiments with UCN, high precision mass measurements and laser spectroscopy of short-lived fission products (TRIGA-TRAP), the production of radionuclides for fast chemical separations, medical and radiopharmaceutical applications, and the use of the neutron activation analysis for the application in archeometry, solar energy technique, criminalistics and vine analysis. Furthermore, studies are performed to judge if the Boron Neutron Capture Therapy (BNCT) can be applied at the TRIGA Mainz for cancer treatment of liver metastases. Also, the reactor facility is used for the

  9. Feasibility study of the university of Utah TRIGA reactor power upgrade - Part I: Neutronics-based study in respect to control rod system requirements and design

    Directory of Open Access Journals (Sweden)

    Ćutić Avdo

    2013-01-01

    Full Text Available We present a summary of extensive studies in determining the highest achievable power level of the current University of Utah TRIGA core configuration in respect to control rod requirements. Although the currently licensed University of Utah TRIGA power of 100 kW provides an excellent setting for a wide range of experiments, we investigate the possibility of increasing the power with the existing fuel elements and core structure. Thus, we have developed numerical models in combination with experimental procedures so as to assess the potential maximum University of Utah TRIGA power with the currently available control rod system and have created feasibility studies for assessing new core configurations that could provide higher core power levels. For the maximum determined power of a new University of Utah TRIGA core arrangement, a new control rod system was proposed.

  10. Subcadmic and epicadmic flow in the dry tube of the TRIGA Mark III reactor of the Nuclear Center of Mexico; Flujo subcadmico y epicadmico en el tubo seco del reactor TRIGA Mark III del Centro Nuclear de Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Delfin L, A.; Mazon R, R.; Nava R, B

    1991-04-15

    The mensuration of the thermal and fast flows of the irradiation facilities of the core of the reactor is important, since allow us to determine the optimum time of irradiation of the samples in the reactor. The Dry Tube especially, is an irradiation installation that it was designed in the I.N.I.N. to supply the pneumatic irradiation system of capsules with durations bigger than 15 minutes and it can be used for exposures until a maximum of three hours. The main users are the Nuclear Chemistry Department and the Neutron activation analysis. In this report the neutron flux sub cadmic and epi cadmic obtained in an experimental way in the Dry Tube for the reactor operating in stationary state to powers of 100 Kw, 300 Kw and 1000 Kw are reported and with these values it is interpolated for other powers. (Author)

  11. Theoretical evaluation of the production of the poisons Xe-135 and Sm-149 of the TRIGA Mark III reactor with mixed core; Evaluacion teorica de la produccion de los venenos Xe-135 y Sm-149 del reactor TRIGA Mark III con nucleo mixto

    Energy Technology Data Exchange (ETDEWEB)

    Paredes G, L.C

    1991-11-15

    It was theoretically determined the accumulation of the Xe{sup 135} and Sm {sup 149} in function, of the time during a stationary state of 72 h. continuous for the reactor TRIGA Mark III to 1 MW of thermal power with mixed core. The values of negative reactivity due to these isotopes are of 2.04 dollars and 0.694 dollars to the 72 h, quantities that will have to be compensated if wants that the reactor continues working to this power. Under the same conditions but considering a core with standard fuel, it was found a value of {rho} = 1.70 dollars, resulting a difference of 0.30 dollars of negative reactivity in function of the type of analyzed core. This difference is important for the calculations of fuel management of a reactor. The concentration in balance of the xenon was reaches after an operation to constant power of 1 MW by 50 h, contrary to the samarium that reaches it balance after 3 weeks of operation starting from the initial start up and it stays constant along the useful life of the reactor while a change of fuel doesn't exist. It was obtained that for operation times greater to 60 h. at 1 MW, a peak of negative reactivity of the Xe{sup 135} is generated between the 7 and 11 h after the instantaneous shut down, with a value of 2.43 dollars, that is to say 0.39 additional dollars to those taken place during the continuous irradiation. (Author)

  12. Radioactivity of spent TRIGA fuel

    Science.gov (United States)

    Usang, M. D.; Nabil, A. R. A.; Alfred, S. L.; Hamzah, N. S.; Abi, M. J. B.; Rawi, M. Z. M.; Abu, M. P.

    2015-04-01

    Some of the oldest TRIGA fuel in the Malaysian Reaktor TRIGA PUSPATI (RTP) is approaching the limit of its end of life with burn-up of around 20%. Hence it is prudent for us to start planning on the replacement of the fuel in the reactor and other derivative activities associated with it. In this regard, we need to understand all of the risk associated with such operation and one of them is to predict the radioactivity of the fuel, so as to estimate the safety of our working conditions. The radioactivity of several fuels are measured and compared with simulation results to confirm the burnup levels of the selected fuels. The radioactivity measurement are conducted inside the water tank to reduce the risk of exposure and in this case the detector wrapped in plastics are lowered under water. In nuclear power plant, the general practice was to continuously burn the fuel. In research reactor, most operations are based on the immediate needs of the reactor and our RTP for example operate periodically. By integrating the burnup contribution for each core configuration, we simplify the simulation of burn up for each core configuration. Our results for two (2) fuel however indicates that the dose from simulation underestimate the actual dose from our measurements. Several postulates are investigated but the underlying reason remain inconclusive.

  13. Feasibility study of the University of Utah TRIGA reactor power upgrade in respect to control rod system

    Science.gov (United States)

    Cutic, Avdo

    The objectives of this thesis are twofold: to determine the highest achievable power levels of the current University of Utah TRIG Reactor (UUTR) core configuration with the existing three control rods, and to design the core for higher reactor power by optimizing the control rod worth. For the current core configuration, the maximum reactor power, eigenvalue keff, shutdown margin, and excess reactivity have been measured and calculated. These calculated estimates resulted from thermal power calibrations, and the control rod worth measurements at various power levels. The results were then used as a benchmark to verify the MCNP5 core simulations for the current core and then to design a core for higher reactor power. This study showed that the maximum achievable power with the current core configuration and control rod system is 150kW, which is 50kW higher than the licensed power of the UUTR. The maximum achievable UUTR core power with the existing fuel is determined by optimizing the core configuration and control rod worth, showing that a power upgrade of 500 kW is achievable. However, it requires a new control rod system consisting of a total of four control rods. The cost of such an upgrade is $115,000.

  14. Design of the experimental apparatus to obtain a thermal neutron beam, intermediate-energy neutrons (2-144 keV) and high-energy photons (6 MeV) by means of the TRIGA reactor at the ENEA Casaccia center

    CERN Document Server

    Laitano, R F

    1987-01-01

    Design of the experimental apparatus to obtain a thermal neutron beam, intermediate-energy neutrons (2-144 keV) and high-energy photons (6 MeV) by means of the TRIGA reactor at the ENEA Casaccia center

  15. Modeling a TRIGA Power System with ATHENA

    Energy Technology Data Exchange (ETDEWEB)

    Davis, C.B.

    1985-01-01

    GA Technologies TRIGA Power System (TPS) is a power-producing version of the Training Research and Isotope General Atomic (TRIGA) reactor. The TPS analyzed here is designed to produce 10 MW of electrical power. The TPS features three major thermal-hydraulic systems, including a water-filled primary coolant system, a water-filled residual heat removal system, and a Freon-filled secondary coolant system. A thermal-hydraulic model of the TPS was developed using the Advanced Thermal Hydraulic Energy Network Analyzer (ATHENA) computer code, and two demonstration calculations were performed. ATHENA is based on the Reactor Excursion and Leak Analysis Program (RELAP5/MOD2) and has similar, but expanded capabilities. The expanded capabilities allow the representation of several different fluids, including water and Freon-11. This paper provides descriptions of the TPS, the ATHENA computer code and ATHENA TPS model, results of the demonstration calculations, conclusions, and references. 2 refs., 7 figs.

  16. TRIGA OCEANOGRAPHIC POWER SUPPLY FOR A MANNED UNDERWATER STATION. VOLUME I. REFERENCE DESIGN.

    Science.gov (United States)

    The TRIGA Oceanographic Power Supply (TOPS) is designed to provide 100 kw of electrical power for a Manned Underwater Station (MUS). The design is... TRIGA research reactor. It contains the entire pressurized water primary coolant circuit and the steam generator. The U-ZrH-fueled, water-cooled core

  17. An RFQ cooler and buncher for the TRIGA-SPEC experiment

    Science.gov (United States)

    Beyer, T.; Blaum, K.; Block, M.; Düllmann, Ch. E.; Eberhardt, K.; Eibach, M.; Frömmgen, N.; Geppert, C.; Gorges, C.; Grund, J.; Hammen, M.; Kaufmann, S.; Krieger, A.; Nagy, Sz.; Nörterhäuser, W.; Renisch, D.; Smorra, C.; Will, E.

    2014-01-01

    A linear Paul trap for cooling of ion beams, the former cooler for emittance elimination radiofrequency quadrupole (RFQ) at MISTRAL/ISOLDE, has been installed and commissioned at the TRIGA-SPEC experiment located at the research reactor TRIGA Mainz. It is connected to a hot-surface-ionization ion source and a subsequent mass separator for ionization and pre-separation of neutron-rich fission products as delivered from the reactor. The capability of accumulating and bunching ion beams has been implemented to provide low-emittance ion pulses of 250 ns width containing up to 106 ions. A technical description of the upgraded RFQ as well as its characterization with stable ions is presented. Its installation allows delivery of low-emittance ion bunches to the two branches of the TRIGA-SPEC experiment, namely TRIGA-TRAP and TRIGA-LASER.

  18. Deployment of a three-dimensional array of Micro-Pocket Fission Detector triads (MPFD3) for real-time, in-core neutron flux measurements in the Kansas State University TRIGA Mark-II Nuclear Reactor

    Science.gov (United States)

    Ohmes, Martin Francis

    A Micro-Pocket Fission Detector (MPFD) is a miniaturized type of fission chamber developed for use inside a nuclear reactor. Their unique design allows them to be located between or even inside fuel pins while being built from materials which give them an operational lifetime comparable to or exceeding the life of the fuel. While other types of neutron detectors have been made for use inside a nuclear reactor, the MPFD is the first neutron detector which can survive sustained use inside a nuclear reactor while providing a real-time measurement of the neutron flux. This dissertation covers the deployment of MPFDs as a large three-dimensional array inside the Kansas State University TRIGA Mark-II Nuclear Reactor for real-time neutron flux measurements. This entails advancements in the design, construction, and packaging of the Micro-Pocket Fission Detector Triads with incorporated Thermocouple, or MPFD3-T. Specialized electronics and software also had to be designed and built in order to make a functional system capable of collecting real-time data from up to 60 MPFD3-Ts, or 180 individual MPFDs and 60 thermocouples. Design of the electronics required the development of detailed simulations and analysis for determining the theoretical response of the detectors and determination of their size. The results of this research shows that MPFDs can operate for extended times inside a nuclear reactor and can be utilized toward the use as distributed neutron detector arrays for advanced reactor control systems and power mapping. These functions are critical for continued gains in efficiency of nuclear power reactors while also improving safety through relatively inexpensive redundancy.

  19. Analysis of neutron flux distribution using the Monte Carlo method for the feasibility study of the Prompt Gamma Activation Analysis technique at the IPR-R1 TRIGA reactor

    Energy Technology Data Exchange (ETDEWEB)

    Guerra, Bruno T.; Pereira, Claubia, E-mail: brunoteixeiraguerra@yahoo.com.br, E-mail: claubia@nuclear.ufmg.br [Universidade Federal de Minas Gerais (DEN/UFMG), Belo Horizonte, MG (Brazil). Departmento de Energia Nuclear; Soares, Alexandre L.; Menezes, Maria Angela B.C., E-mail: menezes@cdtn.br, E-mail: asleal@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2015-07-01

    The IPR-R1 is a reactor type TRIGA, Mark-I model, manufactured by the General Atomic Company and installed at Nuclear Technology Development Centre (CDTN), Brazilian Commission for Nuclear Energy (CNEN), in Belo Horizonte, Brazil. It is a light water moderated and cooled, graphite-reflected, open-pool type research reactor and operates at 100 kW. It presents low power, low pressure, for application in research, training and radioisotopes production. The fuel is an alloy of zirconium hydride and uranium enriched at 20% in {sup 235}U. The implementation of the PGNAA (Prompt Gamma Neutron Activation Analysis) using this research reactor will significantly increase in number of chemical elements analysed and the kind of matrices. A project is underway in order to implement this technique at CDTN. The objective of this study was to contribute in feasibility analysis of implementing this technique. For this purpose, MCNP is being used. Some variance reduction tools in the methodology, that has been already developed, was introduced for calculating of the neutron flux in the neutron extractor inclined. The objective was to reduce the code error and thereby increasing the reliability of the results. With the implementation of the variance reduction tools, the results of the thermal and epithermal neutron fluxes presented a significant improvement in both calculations. (author)

  20. Development of TRIGA Fuel Fabrication by Powder Technique

    OpenAIRE

    H. Suwarno

    2014-01-01

    The prospect of operation of the Indonesian TRIGA reactors may be jeopardizes in the future due to the lack of fuel and control rods. Both fuel and control rods may not longer be imported and should be developed domestically. The most specific technology to fabricate TRIGA fuel rod is the production of UZrH1.6 pellet. The steps include converting the massive U metal into powder in by hydriding-dehydriding technique and mixing the U and Zr powders. A research has been planned to conducted by t...

  1. Comparative analysis of preliminary design core of TRIGA Bandung using fuel element plate MTR in Indonesia

    Science.gov (United States)

    Ramadhan, Anwar Ilmar; Umar, Efrizon; Tandian, Nathanael Panagung; Suwono, Aryadi

    2017-01-01

    TRIGA Bandung is a research nuclear reactor owned by Indonesia, located in Bandung with a power of 2 MWth. Nuclear research reactor TRIGA Bandung is used as a center for applied research and development in the field of application of the nuclear technologies. TRIGA Bandung is currently still using a cylindrical fuel element, this raises a new problem - the limited number of existing fuel element. The purpose of this research is the development of the preliminary core design of a nuclear research reactor TRIGA Bandung using fuel element plate MTR. The research method is modeling and simulation the preliminary design core of nuclear research reactor TRIGA Bandung using comparative method of porous media and non-porous media with CFD code. This research shows the velocity flow and temperature distribution and the influence of pressure from the comparison method of k-ɛ standard model and porous media model at the preliminary design in the core area of TRIGA Bandung research reactor with fuel element plate MTR.

  2. Benchmarking criticality analysis of TRIGA fuel storage racks.

    Science.gov (United States)

    Robinson, Matthew Loren; DeBey, Timothy M; Higginbotham, Jack F

    2017-01-01

    A criticality analysis was benchmarked to sub-criticality measurements of the hexagonal fuel storage racks at the United States Geological Survey TRIGA MARK I reactor in Denver. These racks, which hold up to 19 fuel elements each, are arranged at 0.61m (2 feet) spacings around the outer edge of the reactor. A 3-dimensional model was created of the racks using MCNP5, and the model was verified experimentally by comparison to measured subcritical multiplication data collected in an approach to critical loading of two of the racks. The validated model was then used to show that in the extreme condition where the entire circumference of the pool was lined with racks loaded with used fuel the storage array is subcritical with a k value of about 0.71; well below the regulatory limit of 0.8. A model was also constructed of the rectangular 2×10 fuel storage array used in many other TRIGA reactors to validate the technique against the original TRIGA licensing sub-critical analysis performed in 1966. The fuel used in this study was standard 20% enriched (LEU) aluminum or stainless steel clad TRIGA fuel. Copyright © 2016. Published by Elsevier Ltd.

  3. Transport of fission products with a helium gas-jet at TRIGA-SPEC

    Science.gov (United States)

    Eibach, M.; Beyer, T.; Blaum, K.; Block, M.; Eberhardt, K.; Herfurth, F.; Geppert, C.; Ketelaer, J.; Ketter, J.; Krämer, J.; Krieger, A.; Knuth, K.; Nagy, Sz.; Nörtershäuser, W.; Smorra, C.

    2010-02-01

    A helium gas-jet system for the transport of fission products from the research reactor TRIGA Mainz has been developed, characterized and tested within the TRIGA-SPEC experiment. For the first time at TRIGA Mainz carbon aerosol particles have been used for the transport of radionuclides from a target chamber with high efficiency. The radionuclides have been identified by means of γ-spectroscopy. Transport time, efficiency as well as the absolute number of transported radionuclides for several species have been determined. The design and the characterization of the gas-jet system are described and discussed.

  4. TRIGA-SPEC: the prototype of MATS and LaSpec

    Science.gov (United States)

    Kaufmann, S.; Beyer, T.; Blaum, K.; Block, M.; Düllmann, Ch E.; Eberhardt, K.; Eibach, M.; Geppert, C.; Gorges, C.; Grund, J.; Hammen, M.; Krämer, J.; Nagy, Sz; Nörtershäuser, W.; Renisch, D.; Schneider, F.; Wendt, K.

    2015-04-01

    Investigation of short-lived nuclei is a challenging task that MATS and LaSpec will handle at the low energy branch of Super-FRS at FAIR. The groundwork for those experiments is laid-out already today at the TRIGA-SPEC facility as a powerful development platform located at the research reactor TRIGA Mainz. The latest status, new developments and first results of commissioning runs are presented here.

  5. Survey of nuclear parameters from the TRIGA Mark I IPR R1 Brazilian reactor with concentric configuration aiming the application of K{sub 0} neutron activation technique; Levantamento de parametros nucleares do reator TRIGA Mark I IPR R1 com configuracao concentrica visando a aplicacao da tecnica de ativacao neutronica K{sub 0}

    Energy Technology Data Exchange (ETDEWEB)

    Franco, Milton Batista

    2006-07-01

    This research intended to determine the nuclear parameters a, f, spectral index and neutron temperature in several irradiations positions of the TRIGA Mark 1 IPR-R1 reactor, for use on the parametric method K{sub 0} in the CDTN. K{sub 0} is a monostandard method of neutron activation analysis. It is, on the whole, experimentally simple, flexible and an important tool for accurate and convenient standardization in instrumental multi-element analysis. At the time the parameters were determined at the rotatory rack, lower layer and in the central thimble: alpha was calculated applying the three bare monitor method using {sup 197}Au, {sup 94}Zr and {sup 96}Zr; f determination was done according to the bare bi-isotopic method; neutron temperature was calculated through the direct method using {sup 176}Lu, {sup 94}Zr, {sup 96}Zr and {sup 197}Au and the Westcott's g(Tn) function for the {sup 176}Lu was calculated and the result was interpolated in the Grintakis and Kim (1975) Table, determining the neutron temperature. The procedure to check the parameters consisted in using standard solutions of Au (metal foil, NBS), Lu (LuO{sub 2}, Johnson Mattey Company - JMC) and Zr (ZrO{sub 2} and metal foil, Johnson Mattey Company 99,99% and Zry - 4: 98,14% of Zr, National Bureau of Standard- NBS). Several certified reference materials and two samples of intercomparisons (samples of sediment of the IAEA/ARCAL XXVI project) have been analysed by means of k{sub 0}- INAA in order to verify the efficiency of the method and the quality of the parameters. The certified reference materials were: GXR-2, GXR-5 and GXR-6 of the United States Geological Survey (USGS) and Soil-5, Soil-7 and SL-1 of the International Atomic Energy Agency (IAEA). (author)

  6. Safety Evaluation Report Related to the Renewal of the Operating License for the TRIGA Training and Research Reactor at the University of Utah

    OpenAIRE

    United States Nuclear Regulatory Commission, Office of Nuclear Reactor Regulations

    1985-01-01

    This Safety Evaluation Report for the application filed by the University of Utah (UU) for a renewal of operating license R-126 to continue to operate a training and research reactor facility has been prepared by the Office of Nuclear Reactor Regulation of the U.S. Nuclear Regulatory Commission. The facility is owned and operated by the University of Utah and is located on its campus in Salt Lake City, Salt Lake County, Utah. The staff concludes that this training reactor facility can conti...

  7. High-Precision Mass Measurements At TRIGA-TRAP

    Science.gov (United States)

    Smorra, C.; Beyer, T.; Blaum, K.; Block, M.; Eberhardt, K.; Eibach, M.; Herfurth, F.; Ketelaer, J.; Knuth, K.; Nörtershäuser, W.; Nagy, Sz.

    2010-04-01

    In order to study neutron-rich nuclides far from the valley of stability as well as long-lived actinoids the double Penning-trap mass spectrometer TRIGA-TRAP has been recently installed at the research reactor TRIGA Mainz. Short-lived neutron-rich fission products are produced by thermal neutron-induced fission of an actinoid target installed close to the reactor core. A helium gas-jet system with carbon aerosol particles is used to extract the fission products to the experiment. The Penning trap system has already been commissioned. Off-line mass measurements are routinely performed using a recently developed laser ablation ion source, and the gas-jet system has been tested. An overview of the experiment and current status will be given.

  8. The TRIGA in virtual classroom for training; El TRIGA en aula virtual para entrenamiento

    Energy Technology Data Exchange (ETDEWEB)

    Plata M, A. C.; Morales S, J. B.; Salazar S, E. [UNAM, DEPFI Campus Morelos, Jiutepec Morelos 62550 (Mexico)]. e-mail: yoyuclof@hotmail.com

    2008-07-01

    The research nuclear reactors have been fundamental part in the evolution of the nuclear power plants and they have been used in the training for the obtaining of operation licenses of radioactive facilities. For purposes of training of professionals in nuclear engineering, it is interesting to know the benefit that can be obtained by means of the virtual representation of a research nuclear reactor TRIGA, with which they are possible the practice to be realized them but common that to date they are carried out in different nuclear facilities of training throughout the world. The simulation has become a valuable tool in the personal preparation, having obtained ambient and very approximate situations to the reality. The physical models of kinetics of neutrons, heat transfer, Cherenkov effect, dynamics of the xenon, as well as the virtual instrumentation is contemplated in this development. The instrumentation and control panels of a research reactor, failures waited for in the use of this equipment, physical consequences to instruments, virtual personnel and facilities, as well as the administrative and legal aspects that it requires to meet an authorized operator, must be available and they are considered in the first virtual approach. The obtaining of the reactor time constant comprises of the mathematical model that provides to the operator of a direct way the knowledge of the changes of power. The coolant and moderator are modeled as well as the retardations that appear in the measurements and controls that can be introduced from the virtual console. In the simulator the four possible states of operation of the TRIGA can be had. At the moment also the monitoring can be realized and control in remote form, thus the control and supervision interface for the remote operation will be analyzed in their benefits and possible risks in the instruction processes. (Author)

  9. ANALISIS KONVEKSI ALAM TERAS REAKTOR TRIGA BERBAHAN BAKAR TIPE PELAT MENGGUNAKAN COOLOD-N2

    Directory of Open Access Journals (Sweden)

    Sudjatmi K A

    2015-06-01

    Full Text Available ABSTRAK Analisis Konveksi Alam Teras Reaktor Triga Berbahan Bakar Tipe Pelat MENGGUNAKAN COOLOD-N2. Rencana penghentian produksi elemen bakar jenis TRIGA oleh produsen elemen bakar reaktor TRIGA, sudah seharusnya diantisipasi oleh badan pengoperasi reaktor TRIGA untuk menggantikan elemen bakar tipe silinder tersebut dengan tipe pelat yang tersedia di pasaran. Pada penelitian ini dilakukan perhitungan untuk model teras reaktor dengan spesifikasi utama menggunakan bahan bakar U3Si2Al dengan pengayaan uranium  sebesar 19,75% dan tingkat muat 2,96 gU/cm3. Analisis dilakukan menggunakan program COOLOD-N2 yang tervalidasi pada konfigurasi teras TRIGA konversi berbahan bakar tipe pelat, yang tersusun atas 16 elemen bakar, 4 elemen kendali dan 1 fasilitas iradiasi yang terletak tepat di tengah teras. Hasil analisis menunjukkan bahwa dengan temperatur pendingin masuk ke teras sebesar 37oC, dan rasio faktor puncak daya radial ≤ 1,92 maka daya maksimum yang dapat dioperasikan pada moda operasi konveksi bebas adalah 600 kW. Karakteristik termohidrolika yang diperoleh antara lain adalah temperatur pendingin di sisi outlet, kelongsong dan meat masing-masing sebesar 82,39oC, 108,88oC, dan 109,02oC, pada ΔTONB (Temperature Onset of Nucleate Boiling =7,18oC dan nilai OFIR (Onset of flow instability ratio =1,03 Hasil yang diperoleh dari perhitungan ini diharapkan dapat dijadikan acuan untuk menentukan tingkat daya reaktor TRIGA berbahan bakar pelat. Kata kunci: TRIGA Konversi, COOLOD-N2, karakteristik termohidrolika, konveksi alam, elemen bakar tipe pelat.   ABSTRACT ANALYSIS OF NATURAL CONVECTION IN TRIGA REACTOR CORE PLATE TYPES FUELED USING COOLOD-N2. Any pretensions to stop the production of TRIGA fuel elements by TRIGA reactor fuel elements manufacturer should be anticipated by the operating agency of TRIGA reactor to replace the cylinder type fuel element with plate type fuel element that available on the market. In this study, the calculation of U3Si2

  10. TRIGA FUEL PHASE I AND II CRITICALITY CALCULATION

    Energy Technology Data Exchange (ETDEWEB)

    L. Angers

    1999-11-23

    The purpose of this calculation is to characterize the criticality aspect of the codisposal of TRIGA (Training, Research, Isotopes, General Atomic) reactor spent nuclear fuel (SNF) with Savannah River Site (SRS) high-level waste (HLW). The TRIGA SNF is loaded into a Department of Energy (DOE) standardized SNF canister which is centrally positioned inside a five-canister defense SRS HLW waste package (WP). The objective of the calculation is to investigate the criticality issues for the WP containing the five SRS HLW and DOE SNF canisters in various stages of degradation. This calculation will support the analysis that will be performed to demonstrate the viability of the codisposal concept for the Monitored Geologic Repository (MGR).

  11. Implementation of an aerodynamic lens for TRIGA-SPEC

    Science.gov (United States)

    Grund, J.; Düllmann, Ch. E.; Eberhardt, K.; Nagy, Sz.; van de Laar, J. J. W.; Renisch, D.; Schneider, F.

    2016-06-01

    We report on the optimization of the gas-jet system employed to couple the TRIGA-SPEC experiment to the research reactor TRIGA Mainz. CdI2 aerosol particles suspended in N2 as carrier gas are used for an effective transport of fission products from neutron induced 235 U fission from the target chamber to a surface ion source. Operating conditions of the gas-jet were modified to enable the implementation of an aerodynamic lens, fitting into the limited space available in front of the ion source. The lens boosts the gas-jet efficiency by a factor of 4-10. The characterization of the gas-jet system as well as the design of the aerodynamic lens and efficiency studies are presented and discussed.

  12. Temperature feedback of TRIGA MARK-II fuel

    Energy Technology Data Exchange (ETDEWEB)

    Usang, M. D., E-mail: mark-dennis@nuclearmalaysia.gov.my; Minhat, M. S.; Rabir, M. H.; Rawi, M. Z. M. [Malaysia Nuclear Agency, Bangi, 43000 Kajang, Selangor (Malaysia)

    2016-01-22

    We study the amount of temperature feedback on reactivity for the three types of TRIGA fuel i.. ST8, ST12 and LEU fuel, are used in the TRIGA MARK II reactor in Malaysia Nuclear Agency. We employ WIMSD-5B for the calculation of kin f for a single TRIGA fuel surrounded by water. Typical calculations of TRIGA fuel reactivity are usually limited to ST8 fuel, but in this paper our investigation extends to ST12 and LEU fuel. We look at the kin f of our model at various fuel temperatures and calculate the amount reactivity removed. In one instance, the water temperature is kept at room temperature of 300K to simulate sudden reactivity increase from startup. In another instance, we simulate the sudden temperature increase during normal operation where the water temperature is approximately 320K while observing the kin f at various fuel temperatures. For accidents, two cases are simulated. The first case is for water temperature at 370K and the other is without any water. We observe that the higher Uranium content fuel such as the ST12 and LEU have much smaller contribution to the reactivity in comparison to the often studied ST8 fuel. In fact the negative reactivity coefficient for LEU fuel at high temperature in water is only slightly larger to the negative reactivity coefficient for ST8 fuel in void. The performance of ST8 fuel in terms of negative reactivity coefficient is cut almost by half when it is in void. These results are essential in the safety evaluation of the reactor and should be carefully considered when choices of fuel for core reconfiguration are made.

  13. Temperature feedback of TRIGA MARK-II fuel

    Science.gov (United States)

    Usang, M. D.; Minhat, M. S.; Rabir, M. H.; M. Rawi M., Z.

    2016-01-01

    We study the amount of temperature feedback on reactivity for the three types of TRIGA fuel i.. ST8, ST12 and LEU fuel, are used in the TRIGA MARK II reactor in Malaysia Nuclear Agency. We employ WIMSD-5B for the calculation of kin f for a single TRIGA fuel surrounded by water. Typical calculations of TRIGA fuel reactivity are usually limited to ST8 fuel, but in this paper our investigation extends to ST12 and LEU fuel. We look at the kin f of our model at various fuel temperatures and calculate the amount reactivity removed. In one instance, the water temperature is kept at room temperature of 300K to simulate sudden reactivity increase from startup. In another instance, we simulate the sudden temperature increase during normal operation where the water temperature is approximately 320K while observing the kin f at various fuel temperatures. For accidents, two cases are simulated. The first case is for water temperature at 370K and the other is without any water. We observe that the higher Uranium content fuel such as the ST12 and LEU have much smaller contribution to the reactivity in comparison to the often studied ST8 fuel. In fact the negative reactivity coefficient for LEU fuel at high temperature in water is only slightly larger to the negative reactivity coefficient for ST8 fuel in void. The performance of ST8 fuel in terms of negative reactivity coefficient is cut almost by half when it is in void. These results are essential in the safety evaluation of the reactor and should be carefully considered when choices of fuel for core reconfiguration are made.

  14. Development of TRIGA Fuel Fabrication by Powder Technique

    Directory of Open Access Journals (Sweden)

    H. Suwarno

    2014-12-01

    Full Text Available The prospect of operation of the Indonesian TRIGA reactors may be jeopardizes in the future due to the lack of fuel and control rods. Both fuel and control rods may not longer be imported and should be developed domestically. The most specific technology to fabricate TRIGA fuel rod is the production of UZrH1.6 pellet. The steps include converting the massive U metal into powder in by hydriding-dehydriding technique and mixing the U and Zr powders. A research has been planned to conducted by the National Nuclear Energy Agency (BATAN in Indonesia. Fixed amount of U-Zr mixed powders at the ratio of U/Zr = 10 wt% was pressed into a pellet with a diameter of 1.41 in and a thickness of 1 or 1.5 in, sintered at a temperature of 1200oC, followed by hydriding at 800oC to obtained UZrH1.6. The pellets, cladding, and other components were then fabricated into a fuel rod. A detailed discussion of the TRIGA fuel fabrication is presented in the paper.

  15. Radiological Impact of the TRIGA Accelerator-Driven Experiment (TRADE)

    OpenAIRE

    Herrera-Martínez, A; Ferrari, A.; Kadi, Y.; Zanini, L.; Parks, G. T.; Rubbia, Carlo; Burgio, N.; Carta, M; Santagata, A.; Cinotti, L

    2002-01-01

    The TRADE project, which is part of the European Roadmap towards the development of Accelerator Driven Systems (ADS), foresees the coupling of a 110 MeV, 2 mA proton cyclotron with the core of a 1 MW Triga research reactor. We performed radioprotection studies using two state-of-the-art computer code packages, FLUKA and EA-MC. We concentrated on the calculation of the neutron and particle flux and dose rates during normal operation as well as in the case of several possible accidents, in orde...

  16. PERHITUNGAN SUHU ELEMEN BAKAR REAKTOR TRIGA 2000 DALAM TABUNG SIPPING TEST MENGGUNAKAN CFD

    Directory of Open Access Journals (Sweden)

    K.A. Sudjatmi

    2015-03-01

    Full Text Available Telah dihitung suhu elemen bakar pada perangkat sipping test reaktor TRIGA 2000 Bandung. Perhitungan perlu dilakukan untuk memastikan bahwa suhu elemen bakar masih dibawah atau pada batas suhu elemen bakar yang diizinkan pada saat reaktor beroperasi, sehingga dapat dipastikan bahwa pada pelaksanaan pengujian dengan menggunakan perangkat ini, suhu masih dalam batas keselamatan. Perhitungan dilakukan dengan membuat model tabung sipping test berisi elemen bakar yang dikelilingi oleh 9 buah elemen bakar, sesuai dengan posisi tabung sipping test di teras reaktor, dengan menggunakan GAMBIT. Dimensi model disesuaikan dengan dimensi tabung dan elemen bakar dalam teras reaktor TRIGA 2000 Bandung. Pengoperasian sipping test untuk tiap elemen bakar dilakukan selama 30 menit pada daya 300 kW. Perhitungan dilakukan dengan menggunakan perangkat lunak Computational Fluid Dynamics (CFD dan sebagai inputan disesuaikan dengan parameter reaktor TRIGA 2000. Simulasi dilakukan pada pengoperasian dari 30, 60, 90, 120 150, 180 sampai 210 menit. Hasil perhitungan menunjukan bahwa suhu pusat bahan bakar dalam tabung sipping test sebesar 236,06 oC, sedangkan suhu dinding elemen bakar adalah sebesar 87,58 oC. Suhu maksimum pusat bahan bakar reaktor TRIGA 2000 pada operasi normal adalah 650 oC, dan tidak diizinkan terjadinya pendidihan di dalam teras reaktor. Jadi dapat disimpulkan bahwa pengoperasian perangkat sipping test masih sangat aman karena suhu bahan bakar berada dibawah batasan suhu bahan bakar yang diizinkan pada kondisi operasi normal demikian juga suhu dinding elemen bakar masih dibawah suhu didih air. Kata kunci: sipping test, TRIGA, elemen bakar, CFD   It has been calculated the fuel element temperature in the sipping test of Bandung TRIGA 2000 reactor. The calculation needs to be done to ascertain that the fuel element temperatures are below or at the limit of the allowable temperature fuel elements during reactor operation, ensuring that the

  17. PENGARUH BENTUK ROUTING PERPIPAAN SISTEM PENDINGIN PRIMER REAKTOR TRIGA KONVERSI TERHADAP PENURUNAN AKTIVITAS N-16 DI PERMUKAAN TANGKI REAKTOR

    Directory of Open Access Journals (Sweden)

    Veronica Indriati Sri Wardhani

    2016-10-01

    ABSTRACT The conversion program in 2000 Bandung TRIGA reactor fuel from the cylinder into fuel plates needs a new reactor cooling system design. The design of the new reactor cooling system are devised in such away to not much changed from the existing reactor cooling system, regarding its space and location have no possibility to change. Therefore, pipe routing analysis is required to select the plate type TRIGA reactor cooling system, to meet the cooling requirements of the system, attempted to match with the existing space and location. According to the availability of the existing space, four (4 possibilities of pipe routing can be designed. From the four possibilities of pipe routing, then analyze the travel time of particles N-16, which emits gamma radiation from the core to the surface of the reactor tank. Analysis was performed by assuming a constant cooling fluid density (ρ (incompressible fluid, the entire N-16 generated in the reactor core is transported to the surface of the reactor tank. The results show that the third alternative pipe routing is the most optimum, due to its approaching transport time is five (5 times the half-life of N-16 (36.7047 sec, so that its activities decreases from 100% to 3% (A/A0 = 0.0317 and the pipe length is still enough to put in the available space reactor cooling system. Keywords: Pipes, routing, N-16 activities, half-life , TRIGA reactor plate type.

  18. TRIGA MARK-II source term

    Science.gov (United States)

    Usang, M. D.; Hamzah, N. S.; J. B., Abi M.; M. Z., M. Rawi; Abu, M. P.

    2014-02-01

    ORIGEN 2.2 are employed to obtain data regarding γ source term and the radio-activity of irradiated TRIGA fuel. The fuel composition are specified in grams for use as input data. Three types of fuel are irradiated in the reactor, each differs from the other in terms of the amount of Uranium compared to the total weight. Each fuel are irradiated for 365 days with 50 days time step. We obtain results on the total radioactivity of the fuel, the composition of activated materials, composition of fission products and the photon spectrum of the burned fuel. We investigate the differences of results using BWR and PWR library for ORIGEN. Finally, we compare the composition of major nuclides after 1 year irradiation of both ORIGEN library with results from WIMS. We found only minor disagreements between the yields of PWR and BWR libraries. In comparison with WIMS, the errors are a little bit more pronounced. To overcome this errors, the irradiation power used in ORIGEN could be increased a little, so that the differences in the yield of ORIGEN and WIMS could be reduced. A more permanent solution is to use a different code altogether to simulate burnup such as DRAGON and ORIGEN-S. The result of this study are essential for the design of radiation shielding from the fuel.

  19. A radiofrequency quadrupole cooler and buncher for the TRIGA-SPEC experiment

    Energy Technology Data Exchange (ETDEWEB)

    Beyer, Thomas [Max-Planck-Institut fuer Kernphysik, Heidelberg (Germany); Collaboration: TRIGA-SPEC-Collaboration

    2014-07-01

    The mass spectrometer TRIGA-TRAP and the laser spectroscopy setup TRIGA-LASER, forming the TRIGA-SPEC experiment, are installed at the research reactor TRIGA Mainz in order to perform high-precision measurements of ground state properties of short-lived neutron-rich radionuclides. Such measurements allow testing the predictive power of nuclear mass models and support astrophysical nucleosynthesis calculations. The extraction and preparation of these nuclides for both experimental branches is achieved by using an aerosol-based gas-jet system to transport them from an actinide target located inside the reactor to an external surface ionization ion source. The ion source is followed by a mass separator and a linear Paul trap, which was the cooler for emittance elimination COLETTE at MISTRAL/ISOLDE. It has been installed in Mainz and the capability of accumulating and bunching ion beams has been implemented to provide low-emittance ion pulses of 250 ns width containing up to 106 ions. A brief description of the upgraded linear Paul trap as well as its performance in bunching stable ions is presented.

  20. Meteorological observation and radiological dose assessment from the decommission of TRIGA

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Eun Han; Han, Moon Hee; Suh, Kyung Suk; Hwang, Won Tae; Choi, Young Gil [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2000-06-01

    The radiational effect of the decommissioning of TRIGA research reactor on the environment was estimated. Annual joint frequency of wind data was calculated by statistical analysis of wind direction, wind speed and atmospheric stability. The annual effective dose for critical group (child) was estimated as 5.06 x 10{sup -6} mSv/yr at the site boundary on which the maximum atmospheric dispersion factor is represented. The estimated effective dose is 2.02 x 10{sup -3}% of the dose limit of 0.25 mSv/yr. The maximum whole body effective dose to the public at the site boundary for two hours following the accidental releases was 8.17 x 10{sup -10} Sv and 7.22 x 10{sup -10} Sv for TRIGA I and TRIGA II, respectively. These values are 3.27 x 10{sup -7}% and 2.89 x 10{sup -7}% of the dose limit of 3 Sv. As a conclusion, it can be said that the estimated exposure dose from both normal and accident of the decommissioning process of TRIGA research reactor is very small comparing with the dose limit. 19 refs., 5 figs., 32 tabs. (Author)

  1. The impact of trade project in the TRIGA RC-1 activities

    Energy Technology Data Exchange (ETDEWEB)

    Palomba, Mario; Rosa, Roberto [ENEA FIS-ION, Triga RC-1, C.R. Casaccia, Via Anguillarese 301, 00060 S. Maria di Galeria, Rome (Italy)], E-mail: palomba@casaccia.enea.it, E-mail: roberto.rosa@casaccia.enea.it

    2006-07-01

    TRIGA Mark II reactor of ENEA's Casaccia research Center (in Italy named RC-1) reached first criticality in 1960 and, after an upgrade completed in 1967, its power was increased till 1 MW. At this power level it is still running, mainly for short mean life time radioisotopes production (for medical purposes) and neutron radiography. Since 2001, plant personnel and other national/international scientist, were involved in the TRADE (TRiga Accelerator Driven Experiment) project. TRADE experiment, that consists in the coupling of an external proton accelerator to a target to be installed in the central channel of the TRIGA core scrammed to sub-criticality, was based on an original idea of Prof. Carlo Rubbia, presented at CEA in October 2000 and was aimed at a global demonstration of the ADS concept. The TRADE layout, the studies about Target, Target Cooling System, Shielding, system characterisation experiments and other aspects that were investigated, will be described in order to evidence their impact on the TRIGA reactor and related activities. (author)

  2. Modeling of γ field around irradiated TRIGA fuel elements by R2S method

    Science.gov (United States)

    Klemen, Ambrožič; Luka, Snoj

    2017-09-01

    The JSI TRIGA reactor has several irradiation facilities with well characterized neutron fields. The characterization was performed by measurements and by utilizing Monte Carlo particle transport computational methods. Because of this, JSI TRIGA has become a reference center for neutron irradiation of detectors for ATLAS experiment (CERN). Thorough γ characterization of the reactor is however yet to be performed. Current Monte Carlo particle transport code only account for the prompt generation of neutron induced γ rays, which have been characterized, but are neglecting the time dependent delayed part, which may in some cases amount to more then 30% of total γ flux in an operation reactor, and is the only source of γ-rays after reactor shutdown. Several common approaches of modeling delayed -rays , namely D1S and R2S exist. In this paper an in-house developed R2S method code is described, coupling a Monte Carlo particle transport code MCNP6 and neutron activation code FISPACT-II, with intermediate steps performed by custom Python scripts. An example of its capabilities is presented in terms of evaluation of utilization of JSI TRIGA nuclear fuel as a viable γ-ray source. In the model, fresh nuclear fuel is considered and a silicon pipe sample is modeled in. Fuel activities, dose and kerma rates on the sample, as well as emitted γ-ray spectra and isotopic contribution to the contact dose are calculated and presented.

  3. Modifikasi Panel Monitor Reaktor Triga 2000

    OpenAIRE

    P, Margono; M, Pardi; M, Muhaimin

    2003-01-01

    MODIFIKASI PANEL MONITOR REAKTOR TRIGA 2000. Sebagai bagian dan modifikasi sistem kendali reaktor TRIGA 2000 telah dibuat sistem pengamatan parameter-parameter yang diperlukan dalam operasi reaktor seperti daya reaktor, temperatur air, temperatur bahan bakar dan lain sebagainya. Pengamatan tersebut diambil dan sistem pengukuran yang sudah ada dan ditampilkan dalam bentuk digital panel meter. Pengukuran diambil dalam berbagai mode luaran sebagai arus dan tegangan. Sistem pengamatan ini merupak...

  4. Radiological Impact of the TRIGA Accelerator-Driven Experiment (TRADE)

    CERN Document Server

    Herrera-Martínez, A; Kadi, Y; Zanini, L; Parks, G T; Rubbia, Carlo; Burgio, N; Carta, M; Santagata, A; Cinotti, L

    2002-01-01

    The TRADE project, which is part of the European Roadmap towards the development of Accelerator Driven Systems (ADS), foresees the coupling of a 110 MeV, 2 mA proton cyclotron with the core of a 1 MW Triga research reactor. We performed radioprotection studies using two state-of-the-art computer code packages, FLUKA and EA-MC. We concentrated on the calculation of the neutron and particle flux and dose rates during normal operation as well as in the case of several possible accidents, in order to assess the radiation damage and define the design of key components of the facility, such as the beam-line shielding. Both high-energy particle interactions and low-energy neutron transport are treated with a sophisticated method based on a full Monte Carlo simulation, combined with the use of modern nuclear data libraries.

  5. Fission products detection in irradiated TRIGA fuel by means of gamma spectroscopy and MCNP calculation.

    Science.gov (United States)

    Cagnazzo, M; Borio di Tigliole, A; Böck, H; Villa, M

    2018-02-03

    Aim of this work was the detection of fission products activity distribution along the axial dimension of irradiated fuel elements (FEs) at the TRIGA Mark II research reactor of the Technische Universität (TU) Wien. The activity distribution was measured by means of a customized fuel gamma scanning device, which includes a vertical lifting system to move the fuel rod along its vertical axis. For each investigated FE, a gamma spectrum measurement was performed along the vertical axis, with steps of 1 cm, in order to determine the axial distribution of the fission products. After the fuel elements underwent a relatively short cooling down period, different fission products were detected. The activity concentration was determined by calibrating the gamma detector with a standard calibration source of known activity and by MCNP6 simulations for the evaluation of self-absorption and geometric effects. Given the specific TRIGA fuel composition, a correction procedure is developed and used in this work for the measurement of the fission product Zr 95 . This measurement campaign is part of a more extended project aiming at the modelling of the TU Wien TRIGA reactor by means of different calculation codes (MCNP6, Serpent): the experimental results presented in this paper will be subsequently used for the benchmark of the models developed with the calculation codes. Copyright © 2018 Elsevier Ltd. All rights reserved.

  6. Transport model based on three-dimensional cross-section generation for TRIGA core analysis

    Science.gov (United States)

    Kriangchaiporn, Nateekool

    This dissertation addresses the development of a reactor core physics model based on 3-D transport methodology utilizing 3-D multigroup fuel lattice cross-section generation and core calculation for PSBR. The proposed 3-D transport calculation scheme for reactor core simulations is based on the TORT code. The methodology includes development of algorithms for 2-D and 3-D cross-section generation. The fine- and broad-group structures for the TRIGA cross-section generation problems were developed based on the CPXSD (Contributon and Point-wise Cross-Section Driven) methodology that selects effective group structure. Along with the study of cross section generation, the parametric studies for SN calculations were performed to evaluate the impact of the spatial meshing, angular, and scattering order variables and to obtain the suitable values for cross-section collapsing of the TRIGA cell problem. The TRIGA core loading 2 is used to verify and validate the selected effective group structures. Finally, the 13 group structure was selected to use for core calculations. The results agree with continuous energy for eigenvalues and normalized pin power distribution. The Monte Carlo solutions are used as the references.

  7. PEROLEHAN SUHU AIR PENDINGIN PRIMER REAKTOR TRIGA 2000 KETIKA PENAMBAHAN CEROBONG DAN PELAT PENUKAR PANAS

    Directory of Open Access Journals (Sweden)

    Reinaldy Nazar

    2015-03-01

    Full Text Available Kesinambungan operasi reaktor TRIGA 2000 di antaranya ditentukan oleh suhu bahan bakar dan suhu air pendingin primer. Sebagai contoh pengoperasian reaktor TRIGA 2000 saat ini sulit mencapai daya 2000 kW, karena suhu di pusat elemen bahan bakar di dalam teras reaktor mencapai 675 oC, suhu pendingin primer yang masuk ke teras reaktor mencapai 41,3 oC, suhu pendingin primer yang ke luar dari tangki reaktor mencapai 48,2 oC. Tingginya suhu elemen bahan bakar dan suhu pendingin primer di dalam teras telah meningkatkan pendidihan dan menambah pembentukan gelembung uap di dalam teras reaktor, sehingga menurunkan moderasi neutron oleh pendingin primer di dalam teras dan reaktor tidak mampu mencapai daya 2000 KW. Beberapa kegiatan yang dapat dilakukan untuk menurunkan suhu bahan bakar dan air pendingin primer di dalam teras reaktor TRIGA 2000, di antaranya dengan menempatkan cerobong di atas teras reaktor dan menambah pelat penukar panas. Mengingat studi kasus ini tidak memungkinkan untuk dilakukan secara eksperimen, maka analisis dilakukan melalui kajian teoritik menggunakan program komputer CFD. Berdasarkan hasil kajian yang telah dilakukan diketahui bahwa dengan menambah tinggi cerobong menjadi 2 m, pelat penukar panas menjadi 384 lembar, laju alir pendingin primer 950 gpm, dan laju alir pendingin sekunder menjadi 1200 gpm, mampu menurunkan suhu pendingin primer yang ke luar dari penukar panas atau suhu pendingin primer yang masuk ke teras reaktor menjadi 30,48 oC. Jika kondisi ini digunakan tentunya akan menurunkan suhu maksimum kelongsong bahan bakar, dan suhu pendingin primer di dalam teras, sehingga akan mengurangi pendidihan di dalam teras reaktor, meskipun hal ini akan menaikkan konsentrasi N-16 di permukaan tangki reaktor menjadi 49,41%. Kata kunci: cerobong, pelat penukar panas, suhu bahan bakar, suhu pendingin primer.   Continuation of the TRIGA 2000 reactor operation is determined by the fuel and primary cooling water temperature. For

  8. Neutronic parameters characterization of the TRIGA IPR-R1 using scale 6.0 (KENO VI)

    Energy Technology Data Exchange (ETDEWEB)

    Faria, Victor; Miro, Rafael; Verdu, Gumersindo; Barrachina, Teresa [Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM), Universitat Politecnica de València (Spain); Silva, Clarysson A. Mello da; Pereira, Claubia [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear; Dalle, Hugo Moura [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2011-07-01

    KENO-VI is a Monte Carlo based transport code used to obtain the criticality of a nuclear system. A model built using this code in the SCALE6.0 software system was developed for the characterization of neutronic parameters of the IPR-R1 TRIGA research reactor. A comparison with experimental values and those calculated with a MCNP code model could be then attained with the purpose to validate this methodology. (author)

  9. The Heidelberg classification of renal cell tumours

    NARCIS (Netherlands)

    Kovacs, G; Akhtar, M; Beckwith, BJ; Bugert, P; Cooper, CS; Delahunt, B; Eble, JN; Fleming, S; Ljungberg, B; Medeiros, LJ; Moch, H; Reuter, VE; Ritz, E; Roos, G; Schmidt, D; Srigley, [No Value; Storkel, S; VandenBerg, E; Zbar, B

    1997-01-01

    This paper presents the conclusions of a workshop entitled 'Impact of Molecular Genetics on the Classification of Renal Cell Tumours', which was held in Heidelberg in October 1996, The focus on 'renal cell tumours' excludes any discussion of Wilms' tumour and its variants, or of tumours metastatic

  10. THE HEIDELBERG CATECHISM AND THE CHURCH

    African Journals Online (AJOL)

    and as a preaching guide for instructing the common people.2 The new catechism was an ... body of the church. (Bierma 2005c:148). The Catechesis Minor has the same focus on the communion and the same double movement is explained. ... The briefness of the Heidelberg Catechism, in the trail of the Catechesis. Minor ...

  11. NFR TRIGA package design review report

    Energy Technology Data Exchange (ETDEWEB)

    Clements, M.D.

    1994-08-26

    The purpose of this document is to compile, present and document the formal design review of the NRF TRIGA packaging. The contents of this document include: the briefing meeting presentations, package description, design calculations, package review drawings, meeting minutes, action item lists, review comment records, final resolutions, and released drawings. This design review required more than two meeting to resolve comments. Therefore, there are three meeting minutes and two action item lists.

  12. Validation of the Serpent 2 code on TRIGA Mark II benchmark experiments.

    Science.gov (United States)

    Ćalić, Dušan; Žerovnik, Gašper; Trkov, Andrej; Snoj, Luka

    2016-01-01

    The main aim of this paper is the development and validation of a 3D computational model of TRIGA research reactor using Serpent 2 code. The calculated parameters were compared to the experimental results and to calculations performed with the MCNP code. The results show that the calculated normalized reaction rates and flux distribution within the core are in good agreement with MCNP and experiment, while in the reflector the flux distribution differ up to 3% from the measurements. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. PENGARUH NILAI BAKAR TERHADAP INTEGRITAS KELONGSONG ELEMEN BAKAR TRIGA 2000

    Directory of Open Access Journals (Sweden)

    K.A. Sudjatmi

    2015-04-01

    , kelongsong.   Bandung TRIGA reactor fuel element, which is a homogeneous mixture of uranium and zirconium hydride alloy shaped solid rod. At the time of reactor operation, the fuel temperature will increase with increasing high-power reactor, which will consequently increase the pressure of the gases that exist in the cladding. Pressures that arise in the fuel cladding is the sum of three components of the pressure, there are due to trapped air between the fuel cladding, fission gas pressure by forming and pressure stemming from the separation of hydrogen from zirconium hydride alloy. Fission gases generated by fuel depends on fuel burnup. The larger the value of a fuel burn, the greater the gaseous fission gases produced, consequently the greater the pressure inside the cladding caused by fission gas. The calculation of the amount of fission gases in the cladding which is a function of the fuel carried by using the program ORIGEN-2. ORIGEN-2 is a widely used computer code for calculating the build up, decay and processing of radioactive materials. The cross sections, fission product yields, decay data, decay photon data are either hard wired in the program or are made available as data libraries during the execution of the code. From the calculation results can be concluded that the gas pressure caused by fission gas is very small (4.13 10-3 psi compared to the gas pressure caused by air trapped in the cladding that is equal to 56.6 psi, which resulted the cladding stres at 2080 psi. To ensure the integrity of fuel element cladding, the stress that occurs in the fuel cladding must be less than half the yield stress of cladding material, 12,000 psi at a temperature of 750 °C or about 40,000 psi at a temperature of 138 oC. It can be concluded that from the side of the fuel, then the fuel possible for use until the fuel burnup reaches a maximum value, in other words, the age of the fuel does not depend on the burnup of the fuel element. Keywords : TRIGA, burnuup, fuel

  14. Karakterisasi Unjuk Kerja Pompa Sistem Pendingin Primer Reaktor Triga 2000

    OpenAIRE

    Soekodijat, B

    2002-01-01

    KARAKTERISASI UNJUK KERJA POMPA SISTEM PENDINGIN PRIMER REAKTOR TRIGA 2000. Pompa sistem pendingin primer adalah salah satu komponen utama pada sistem pendingin Reaktor TRIGA 2000. Karakteristik unjuk kerja pompa sangat penting diketahui agar pompa dapat dioperasikan dengan baik dan aman. Penelitian dilakukan dengan cara memverifikasi kurva kinerja pompa yang diberikan oleh pabrik. Proses verifikasi dilakukan dengan mengubah-ubah laju alir pompa (dengan cara mengatur besar kecilnya pembukaan ...

  15. Transient cases analyses of the TRIGA IPR-R1 using thermal hydraulic and neutron kinetic coupled codes

    Energy Technology Data Exchange (ETDEWEB)

    Reis, Patricia A.L.; Costa, Antonella L.; Pereira, Claubia; Veloso, Maria A.F.; Scari, Maria E., E-mail: patricialire@yahoo.com.br, E-mail: antonella@nuclear.ufmg.br, E-mail: claubia@nuclear.ufmg.br, E-mail: dora@nuclear.ufmg.br, E-mail: melizabethscari@yahoo.com [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear; Instituto Nacional de Ciencias e Tecnologia de Reatores Nucleares Inovadores (INCT/CNPq), Belo Horizonte (Brazil); Miro, Rafael; Verdu, Gumersindo, E-mail: rmiro@iqn.upv.es, E-mail: gverdu@iqn.upv.es [Universidad Politecnica de Valencia (Spain). Departamento de Ingenieria Quimica y Nuclear

    2015-07-01

    Simulations and analyses of nuclear reactors have been improved by utilization of coupled thermal-hydraulic (TH) and neutron kinetics (NK) system codes especially to simulate transients that involve strong feedback effects between NK and TH. The TH-NK coupling technique was initially developed and used to simulate the behavior of power reactors; however, several coupling methodologies are now being applied for research reactors. This work presents the coupling methodology application between RELAP5 and PARCS codes using as a model the TRIGA IPR-R1 research reactor. Analyses of steady state and transient conditions and comparisons with results from simulations using only the RELAP5 code are being presented in this paper. (author)

  16. Status of the TRIGA-LASER experiment

    Science.gov (United States)

    Gorges, C.; Kaufmann, S.; Geppert, Ch.; Krämer, J.; Sánchez, R.; Nörtershäuser, W.

    2017-11-01

    We report on the newly developed control system called TRITON and the new data acquisition called TILDA as well as on improved isotope shift measurements of the isotopes 40,42,44,48Ca in the 4 s 2S1/2 → 4 p 2P3/2 (D2) transition at the TRIGA-LASER experiment in Mainz using collinear laser spectroscopy. Well known isotope shift measurements in the 4 s 2S1/2 → 4 p 2P1/2 (D1) transition act as calibration points to reduce the uncertainties in the D2-line to provide reference values for the determination of nuclear charge radii and quadrupole moments of neutron rich calcium isotopes at COLLAPS.

  17. Status of the TRIGA-LASER experiment

    Energy Technology Data Exchange (ETDEWEB)

    Gorges, C., E-mail: chgorges@uni-mainz.de; Kaufmann, S., E-mail: s.kaufmann@uni-mainz.de [Technische Universität Darmstadt, Institut für Kernphysik (Germany); Geppert, Ch. [Johannes Gutenberg-Universität Mainz, Institut für Kernchemie (Germany); Krämer, J. [Technische Universität Darmstadt, Institut für Kernphysik (Germany); Sánchez, R. [GSI Helmholtzzentrum für Schwerionenforschung (Germany); Nörtershäuser, W. [Technische Universität Darmstadt, Institut für Kernphysik (Germany)

    2017-11-15

    We report on the newly developed control system called TRITON and the new data acquisition called TILDA as well as on improved isotope shift measurements of the isotopes {sup 40,42,44,48}Ca in the 4s 2S1/2 → 4p 2P3/2 (D2) transition at the TRIGA-LASER experiment in Mainz using collinear laser spectroscopy. Well known isotope shift measurements in the 4s 2S1/2 → 4p 2P1/2 (D1) transition act as calibration points to reduce the uncertainties in the D2-line to provide reference values for the determination of nuclear charge radii and quadrupole moments of neutron rich calcium isotopes at COLLAPS.

  18. Ceftiofur resistance in Salmonella enterica serovar Heidelberg from chicken meat and humans, Canada

    National Research Council Canada - National Science Library

    Dutil, Lucie; Irwin, Rebecca; Finley, Rita; Ng, Lai King; Avery, Brent; Boerlin, Patrick; Bourgault, Anne Marie; Cole, Linda; Daignault, Danielle; Desruisseau, Andrea; Demczuk, Walter; Hoang, Linda; Horsman, Greg B; Ismail, Johanne; Jamieson, Frances; Maki, Anne; Pacagnella, Ana; Pillai, Dylan R

    2010-01-01

    ...) between ceftiofur-resistant Salmonella enterica serovar Heidelberg isolated from retail chicken and incidence of ceftiofur-resistant Salmonella serovar Heidelberg infections in humans across Canada...

  19. Enrichment measurement in TRIGA type fuels; Medicion de enriquecimiento en combustibles tipo Triga

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar H, F.; Mazon R, R. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2001-05-15

    The Department of Energy of the United States of North America, through the program 'Idaho Operations Nuclear Spent Fuel Program' of the Idaho National Engineering and Environmental Laboratory (INEEL), in Idaho Falls; Idaho USA, hires to Global Technologies Inc. (GTI) to develop a prototype device of detection enrichment uranium (DEU Detection of Enrichment of Uranium) to determine quantitatively the enrichment in remainder U-235 in a TRIGA fuel element at the end of it useful life. The characteristics of the prototype developed by GTI are the following ones: It allows to carry out no-destructive measurements of TRIGA type fuel. Easily transportable due to that reduced of it size. The determination of the enrichment (in grams of U-235) it is obtained with a precision of 5%. The National Institute of Nuclear Research (ININ), in its facilities of the Nuclear Center of Mexico, it has TRIGA type fuel of high and low enrichment (standard and FLIP) fresh and with burnt, it also has the infrastructure (hot cells, armor-plating of transport, etc) and qualified personnel to carry out the necessary maneuvers to prove the operation of the DEU prototype. For this its would be used standard type fuel elements and FLIP, so much fresh as with certain burnt one. In the case of the fresh fuels the measurement doesn't represent any risk, the fuels before and after the measurement its don't contain a quantity of fission products that its represent a radiological risk in its manipulation; but in the case of the fuels with burnt the handling of the same ones represents an important radiological risk reason why for its manipulation it was used the transport armor-plating and the hot cells. (Author)

  20. An iterative approach for TRIGA fuel burn-up determination using nondestructive gamma-ray spectrometry.

    Science.gov (United States)

    Wang, T K; Peir, J J

    2000-01-01

    The purpose of this work is to establish a method for evaluating the burn-up values of the rod-type TRIGA spent fuel by using gamma-ray spectrometry of the short-lived fission products 97Zr/97Nb, 132I, and 140La. Fuel irradiation history is not needed in this method. Short-lived fission-product activities were established by reirradiating the spent fuels in a nuclear reactor. Based on the measured activities, 235U burn-up values can be deduced by iterative calculations. The complication caused by 239Pu production and fission is also discussed in detail. The burn-up values obtained by this method are in good agreement with those deduced from the conventional method based on long-lived fission products 137Cs, 134Cs/137Cs ratio and 106Ru/137Cs ratio.

  1. Irradiation facility at the TRIGA Mainz for treatment of liver metastases.

    Science.gov (United States)

    Hampel, G; Wortmann, B; Blaickner, M; Knorr, J; Kratz, J V; Lizón Aguilar, A; Minouchehr, S; Nagels, S; Otto, G; Schmidberger, H; Schütz, C; Vogtländer, L

    2009-07-01

    The TRIGA Mark II reactor at the University of Mainz provides ideal conditions for duplicating BNCT treatment as performed in Pavia, Italy, in 2001 and 2003 [Pinelli, T., Zonta, A., Altieri, S., Barni, S., Braghieri, A., Pedroni, P., Bruschi, P., Chiari, P., Ferrari, C., Fossati, F., Nano, R., Ngnitejeu Tata, S., Prati, U., Ricevuti, G., Roveda, L., Zonta, C., 2002. TAOrMINA: from the first idea to the application to the human liver. In: Sauerwein et al. (Eds.), Research and Development in Neutron Capture Therapy. Proceedings of the 10th International Congress on Neutron Capture Therapy, Monduzzi editore, Bologna, pp. 1065-1072]. In order to determine the optimal parameters for the planned therapy and therefore for the design of the thermal column, calculations were conducted using the MCNP-code and the transport code ATTILA. The results of the parameter study as well as a possible configuration for the irradiation of the liver are presented.

  2. Irradiation facility at the TRIGA Mainz for treatment of liver metastases

    Energy Technology Data Exchange (ETDEWEB)

    Hampel, G. [Institut fuer Kernchemie, Johannes Gutenberg-Universitaet Mainz, Fritz-Strassmann-Weg 2, D-55128 Mainz (Germany)], E-mail: gabriele.hample@uni-mainz.de; Wortmann, B. [Evonik Energy Services GmbH Essen, Ruettenscheider Str. 1-3, D-45128 Essen (Germany); Blaickner, M. [Austrian Research Centers, 2444 Seibersdorf (Austria); Knorr, J. [TU Dresden, Institut fuer Energietechnik, D-01062 Dresden (Germany); Kratz, J.V. [Institut fuer Kernchemie, Johannes Gutenberg-Universitaet Mainz, Fritz-Strassmann-Weg 2, D-55128 Mainz (Germany); Lizon Aguilar, A. [Evonik Energy Services GmbH Essen, Ruettenscheider Str. 1-3, D-45128 Essen (Germany); Minouchehr, S. [Transplantationschirurgie, Universitaetsklinikum Mainz, D-55131 Mainz (Germany); Nagels, S. [Forschungszentrum Karlsruhe GmbH, Institut fuer Strahlenforschung (ISF), Postfach 3640, D-76021 Karlsruhe (Germany); Otto, G. [Transplantationschirurgie, Universitaetsklinikum Mainz, D-55131 Mainz (Germany); Schmidberger, H. [Klinik und Poliklinik fuer Radioonkologie und Strahlentherapie, Universitaetsklinikum Mainz, D-55131 Mainz (Germany); Schuetz, C.; Vogtlaender, L. [Institut fuer Kernchemie, Johannes Gutenberg-Universitaet Mainz, Fritz-Strassmann-Weg 2, D-55128 Mainz (Germany)

    2009-07-15

    The TRIGA Mark II reactor at University of Mainz provides ideal conditions for duplicating BNCT treatment as performed in Pavia, Italy, in 2001 and 2003 [Pinelli, T., Zonta, A., Altieri, S., Barni, S., Braghieri, A., Pedroni, P., Bruschi, P., Chiari, P., Ferrari, C., Fossati, F., Nano, R., Ngnitejeu Tata, S., Prati, U., Ricevuti, G., Roveda, L., Zonta, C., 2002. TAOrMINA: from the first idea to the application to the human liver. In: Sauerwein et al. (Eds.), Research and Development in Neutron Capture Therapy. Proceedings of the 10th International Congress on Neutron Capture Therapy, Monduzzi editore, Bologna, pp. 1065-1072]. In order to determine the optimal parameters for the planned therapy and therefore for the design of the thermal column, calculations were conducted using the MCNP-code and the transport code ATTILA. The results of the parameter study as well as a possible configuration for the irradiation of the liver are presented.

  3. Dosimetric feasibility study for an extracorporeal BNCT application on liver metastases at the TRIGA Mainz

    Energy Technology Data Exchange (ETDEWEB)

    Blaickner, M., E-mail: matthias.blaickner@ait.ac.at [Health and Environment Department-Molecular Medicine, AIT Austrian Institute of Technology GmbH, Muthgasse 11, A-1190 Vienna (Austria); Kratz, J.V. [Institut fuer Kernchemie, Johannes Gutenberg-Universitaet Mainz, Fritz-Strassmann-Weg 2, D-55128 Mainz (Germany); Minouchehr, S.; Otto, G. [Transplantationschirurgie, Universitaetsklinikum Mainz, Langenbeckstr.1, D-55131 Mainz (Germany); Schmidberger, H. [Klinik und Poliklinik fuer Radioonkologie und Strahlentherapie, Universitaetsklinikum Mainz, Langenbeckstr.1, D-55131 Mainz (Germany); Schuetz, C.; Vogtlaender, L. [Institut fuer Kernchemie, Johannes Gutenberg-Universitaet Mainz, Fritz-Strassmann-Weg 2, D-55128 Mainz (Germany); Wortmann, B. [Evonik Energy Services GmbH Essen, Ruettenscheider Str. 1-3, D-45128 Essen (Germany); Hampel, G. [Institut fuer Kernchemie, Johannes Gutenberg-Universitaet Mainz, Fritz-Strassmann-Weg 2, D-55128 Mainz (Germany)

    2012-01-15

    This study investigates the dosimetric feasibility of Boron Neutron Capture Therapy (BNCT) of explanted livers in the thermal column of the research reactor in Mainz. The Monte Carlo code MCNP5 is used to calculate the biologically weighted dose for different ratios of the {sup 10}B-concentration in tumour to normal liver tissue. The simulation results show that dosimetric goals are only partially met. To guarantee effective BNCT treatment the organ has to be better shielded from all gamma radiation. - Highlights: Black-Right-Pointing-Pointer Monte Carlo simulations demonstrate the potential for BNCT treatment at TRIGA Mainz. Black-Right-Pointing-Pointer Simulation shows the necessity of gamma shielding for the organ from all sides. Black-Right-Pointing-Pointer Secondary photons induced within the graphite contribute considerably to gamma dose.

  4. The rehabilitation/upgrading of Philippine Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Renato, T. Banaga [Philippines Nuclear Research Inst., Quezon (Philippines)

    1998-10-01

    The Philippine Research Reactor (PRR-1) is the only research reactor in the Philippines. It was acquired through the Bilateral Agreement with the United States of America. The General Electric (G.E.) supplied PRR-1 first become operational in 1963 and used MTR plate type fuel. The original one-megawatt G.E. reactor was shutdown and converted into a 3 MW TRIGA PULSING REACTOR in 1984. The conversion includes the upgrading of the cooling system, replacement of new reactor coolant pumps, heat exchanger, cooling tower, replacement of new nuclear instrumentation and standard TRIGA console, TRIGA fuel supplied by General Atomic (G.A.). Philippine Nuclear Research Institute (PNRI) provided the old reactor, did the detailed design of the new cooling system, provided the new non-nuclear instrumentation and electrical power supply system and performed all construction, installation and modification work on site. The TRIGA conversion fuel is contained in a shrouded 4-rod cluster which fit into the original grid plate. The new fuel is a E{sub 1}-U-Z{sub 1}-H{sub 1.6} TRIGA fuel, has a 20% wt Uranium loading with 19.7% U-235 enrichment and about 0.5 wt % Erbium. The Start-up, calibration and Demonstration of Pulsing and Full Power Operation were completed during a three week start-up phase which were performed last March 1968. A few days after, a leak in the pool liner was discovered. The reactor was shutdown again for repair and up to present the reactor is still in the process of rehabilitation. This paper will describe the rehabilitation/upgrading done on the PRR-1 since 1988 up to present. (author)

  5. High Temperature Fuel Cladding Chemical Interactions Between TRIGA Fuels and 304 Stainless Steel

    Energy Technology Data Exchange (ETDEWEB)

    Perez, Emmanuel [Idaho National Lab. (INL), Idaho Falls, ID (United States); Keiser, Jr., Dennis D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Forsmann, Bryan [Boise State Univ., ID (United States); Janney, Dawn E. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Henley, Jody [Idaho National Lab. (INL), Idaho Falls, ID (United States); Woolstenhulme, Eric C. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-02-01

    High-temperature fuel-cladding chemical interactions (FCCI) between TRIGA (Training, Research, Isotopes, General Atomics) fuel elements and the 304 stainless steel (304SS) are of interest to develop an understanding of the fuel behavior during transient reactor scenarios. TRIGA fuels are composed of uranium (U) particles dispersed in a zirconium-hydride (Zr-H) matrix. In reactor, the fuel is encased in 304-stainless-steel (304SS) or Incoloy 800 clad tubes. At high temperatures, the fuel can readily interact with the cladding, resulting in FCCI. A number of FCCI can take place in this system. Interactions can be expected between the cladding and the Zr-H matrix, and/or between the cladding and the U-particles. Other interactions may be expected between the Zr-H matrix and the U-particles. Furthermore, the fuel contains erbium-oxide (Er-O) additions. Interactions can also be expected between the Er-O, the cladding, the Zr-H and the U-particles. The overall result is that very complex interactions may take place as a result of fuel and cladding exposures to high temperatures. This report discusses the characterization of the baseline fuel microstructure in the as-received state (prior to exposure to high temperature), characterization of the fuel after annealing at 950C for 24 hours and the results from diffusion couple experiments carries out at 1000C for 5 and 24 hours. Characterization was carried out via scanning electron microscopy (SEM) and transmission electron microscopy (TEM) with sample preparation via focused ion beam in situ-liftout-technique.

  6. Three-dimensional modeling and virtual TRIGA reconfigure for specialized training; Modelado 3D y TRIGA virtual reconfigurable para entrenamiento especializado

    Energy Technology Data Exchange (ETDEWEB)

    Plata M, A. C.; Morales S, J. B.; Flores, M. [Facultad de Ingenieria, Division de Estudios de Posgrado, Campus Morelos, UNAM, Paseo Cuauhnahuac 8532, Col. Progreso, 62550 Jiutepec, Morelos (Mexico)], e-mail: yoyuclof@hotmail.com

    2009-10-15

    The news products that have been realized for the training virtual room which is developing in the Engineering Faculty of National Autonomous University of Mexico are presented. These improvements are mainly in modeling of virtual reality of the reactor building, as well as internal parts of reactor. It was modified the dynamic modeling of control rods of reaction in chain and included new elements to reactor. which exist not necessarily in all the TRIGA, but that, for educational purposes are highly useful. Such is the case of addition of valves, pumps, tanks, injection lines of light or borated water, as well as a heat exchanger, with it can recycle only pool water from side to other, or to extract energy toward a secondary controller from the operator console. The models of heat decay were included, of subcooled and nucleated boiling of coolant-moderator in the core, the dynamics of xenon and samarium. These last with independent multipliers of simulation time to allow variations very fast that real time. All these additions modify the coolant-moderator characteristics and consequently the answer of simulator. The controls are separated in: an operator console (student) very similar to the real systems, another of instructor that has additional access to parameters not directly measurement in the facilities but that allow to modify the system to illustrate another not easily possible effects in the real system. The traveling crane is also modeled and is controlled in a third console from where can to replacement to reactor as well as to add or to replacement: intakes and discharges of coolant circulators, measuring instruments, reflectors and neutron sources. The dynamic models have been tested in SCILAB and SCICOS. At present is working in the integration of the dynamic simulator and the virtual reality mainly with the design requirement of allowing functions of increased reality. (Author)

  7. Vibro-acoustic Imaging at the Breazeale Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Smith, James Arthur [Idaho National Lab. (INL), Idaho Falls, ID (United States); Jewell, James Keith [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lee, James Edwin [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-09-01

    The INL is developing Vibro-acoustic imaging technology to characterize microstructure in fuels and materials in spent fuel pools and within reactor vessels. A vibro-acoustic development laboratory has been established at the INL. The progress in developing the vibro-acoustic technology at the INL is the focus of this report. A successful technology demonstration was performed in a working TRIGA research reactor. Vibro-acoustic imaging was performed in the reactor pool of the Breazeale reactor in late September of 2015. A confocal transducer driven at a nominal 3 MHz was used to collect the 60 kHz differential beat frequency induced in a spent TRIGA fuel rod and empty gamma tube located in the main reactor water pool. Data was collected and analyzed with the INLDAS data acquisition software using a short time Fourier transform.

  8. Best Safety Practices for the Operation of Research Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Boeck, H.; Villa, M. [Atominstitute of the Austrian Universities, 1020 Vienna (Austria)

    2002-07-01

    A survey on administrative, organisational and technical aspects for the safe and efficient operation of a 250 kW TRIGA Mark II research reactor is given. The replacement of the I and C system is discussed, maintenance procedures are presented and the fuel management is described. (author)

  9. University Reactor Sharing Program. Final report, September 30, 1992--September 29, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Wehring, B.W. [J.J. Pickle Research Campus, Austin, TX (United States)

    1995-01-01

    Over the past 20 years, the number of nuclear reactors on university campuses in the US declined from more than 70 to less than 40. Contrary to this trend, The University of Texas at Austin constructed a new reactor facility at a cost of $5.8 million. The new reactor facility houses a new TRIGA Mark II reactor which replaces an in-ground TRIGA Mark I reactor located in a 50-year old building. The new reactor facility was constructed to strengthen the instruction and research opportunities in nuclear science and engineering for both undergraduate and graduate students at The University of Texas. On January 17, 1992, The University of Texas at Austin received a license for operation of the new reactor. Initial criticality was achieved on March 12, 1992, and full power operation, on March 25, 1992. The UT-TRIGA research reactor provides hands-on education, multidisciplinary research and unique service activities for academic, medical, industrial, and government groups. Support by the University Reactor Sharing Programs increases the availability of The University of Texas reactor facility for use by other educational institutions which do not have nuclear reactors.

  10. TRIGA: Telecommunications Protocol Processing Subsystem Using Reconfigurable Interoperable Gate Arrays

    Science.gov (United States)

    Pang, Jackson; Pingree, Paula J.; Torgerson, J. Leigh

    2006-01-01

    We present the Telecommunications protocol processing subsystem using Reconfigurable Interoperable Gate Arrays (TRIGA), a novel approach that unifies fault tolerance, error correction coding and interplanetary communication protocol off-loading to implement CCSDS File Delivery Protocol and Datalink layers. The new reconfigurable architecture offers more than one order of magnitude throughput increase while reducing footprint requirements in memory, command and data handling processor utilization, communication system interconnects and power consumption.

  11. remembering the heidelberg catechism in south africa today?

    African Journals Online (AJOL)

    that attest to the way in which this document was received with gratitude, affirming the statement of the English delegates referred to at the beginning of this article that the pages of this booklet cannot be bought with tons of gold. One could even argue that the Heidelberg Catechism has become a religious classic.

  12. Remembering the Heidelberg Catechism in South Africa today ...

    African Journals Online (AJOL)

    The first part of the article argues that commemorations invite us to be conscious of the close link between memory and identity, as well as to the fact that our memories of the past are often highly contested memories. The second part of the paper comments on the status of the Heidelberg Catechism as a historical document, ...

  13. Memory culture in the making: the Heidelberg Catechism in the ...

    African Journals Online (AJOL)

    In order to do so, the first two sections of the article deals with the theory of memory, the development of memory culture in communities, and the significance of such an analysis for historical thinking. The third part provides four sets of examples of Heidelberg Catechism recollections as a contribution to analyses of the ...

  14. The Heidelberg Catechism on human sin and misery | Baard | Acta ...

    African Journals Online (AJOL)

    The Heidelberg Catechism's section on Sin and Misery does not provide a moralistic or legalistic perspective on the human condition. Instead, it offers, in abbreviated format, a restatement of the doctrine of original sin, which points to sin as a condition and not just an act. As such, it invites us to think more deeply about the ...

  15. THE HEIDELBERG CATECHISM: A HIDDEN CREEDAL TEXT AND ...

    African Journals Online (AJOL)

    built are contained in the following books of confessions: … The. Heidelberg Catechism, The Belgic Confession, The canon of Dordt ... (Article 4.2 of the Constitution of the Church of the Central Africa. Presbyterian 2002). Interestingly, similar statement is echoed in the Constitution of the. CCAP Nkhoma Synod: The Creed of ...

  16. Progress and upgrading of the Heidelberg high current injector

    Indian Academy of Sciences (India)

    gap cavities was built for injection of high intensities of singly charged heavy ions into the Heidelberg heavy ion storage ring TSR. With different ion sources, this system now is used to deliver positive or negative, atomic and molecular ion beams ...

  17. The Heidelberg Catechism: elements for a theology of care | de ...

    African Journals Online (AJOL)

    Though there are strong affinities with theological anthropology, the ethics of care still lacks a theological framework. The thesis argued here, is that the Heidelberg Catechism offers essential elements for a “theology of care”. It describes 1. God as a caring, 'mothering” God; 2. human beings as having care as their essence ...

  18. The construction of TRIGA-TRAP and direct high-precision Penning trap mass measurements on rare-earth elements and americium

    Energy Technology Data Exchange (ETDEWEB)

    Ketelaer, Jens

    2010-06-14

    The construction of TRIGA-TRAP and direct high-precision Penning trap mass measurements on rare-earth elements and americium: Nuclear masses are an important quantity to study nuclear structure since they reflect the sum of all nucleonic interactions. Many experimental possibilities exist to precisely measure masses, out of which the Penning trap is the tool to reach the highest precision. Moreover, absolute mass measurements can be performed using carbon, the atomic-mass standard, as a reference. The new double-Penning trap mass spectrometer TRIGA-TRAP has been installed and commissioned within this thesis work, which is the very first experimental setup of this kind located at a nuclear reactor. New technical developments have been carried out such as a reliable non-resonant laser ablation ion source for the production of carbon cluster ions and are still continued, like a non-destructive ion detection technique for single-ion measurements. Neutron-rich fission products will be available by the reactor that are important for nuclear astrophysics, especially the r-process. Prior to the on-line coupling to the reactor, TRIGA-TRAP already performed off-line mass measurements on stable and long-lived isotopes and will continue this program. The main focus within this thesis was on certain rare-earth nuclides in the well-established region of deformation around N {proportional_to} 90. Another field of interest are mass measurements on actinoids to test mass models and to provide direct links to the mass standard. Within this thesis, the mass of {sup 241}Am could be measured directly for the first time. (orig.)

  19. Nuclear research reactors in Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Cota, Anna Paula Leite; Mesquita, Amir Zacarias, E-mail: aplc@cdtn.b, E-mail: amir@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2011-07-01

    The rising concerns about global warming and energy security have spurred a revival of interest in nuclear energy, giving birth to a 'nuclear power renaissance' in several countries in the world. Particularly in Brazil, in the recent years, the nuclear power renaissance can be seen in the actions that comprise its nuclear program, summarily the increase of the investments in nuclear research institutes and the government target to design and build the Brazilian Multipurpose research Reactor (BMR). In the last 50 years, Brazilian research reactors have been used for training, for producing radioisotopes to meet demands in industry and nuclear medicine, for miscellaneous irradiation services and for academic research. Moreover, the research reactors are used as laboratories to develop technologies in power reactors, which are evaluated today at around 450 worldwide. In this application, those reactors become more viable in relation to power reactors by the lowest cost, by the operation at low temperatures and, furthermore, by lower demand for nuclear fuel. In Brazil, four research reactors were installed: the IEA-R1 and the MB-01 reactors, both at the Instituto de Pesquisas Energeticas Nucleares (IPEN, Sao Paulo); the Argonauta, at the Instituto de Engenharia Nuclear (IEN, Rio de Janeiro) and the IPR-R1 TRIGA reactor, at the Centro de Desenvolvimento da Tecnologia Nuclear (CDTN, Belo Horizonte). The present paper intends to enumerate the characteristics of these reactors, their utilization and current academic research. Therefore, through this paper, we intend to collaborate on the BMR project. (author)

  20. Neutron radiography (NRAD) reactor 64-element core upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Bess, John D. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-03-01

    The neutron radiography (NRAD) reactor is a 250 kW TRIGA (registered) (Training, Research, Isotopes, General Atomics) Mark II , tank-type research reactor currently located in the basement, below the main hot cell, of the Hot Fuel Examination Facility (HFEF) at the Idaho National Laboratory (INL). It is equipped with two beam tubes with separate radiography stations for the performance of neutron radiography irradiation on small test components. The interim critical configuration developed during the core upgrade, which contains only 62 fuel elements, has been evaluated as an acceptable benchmark experiment. The final 64-fuel-element operational core configuration of the NRAD LEU TRIGA reactor has also been evaluated as an acceptable benchmark experiment. Calculated eigenvalues differ significantly (approximately ±1%) from the benchmark eigenvalue and have demonstrated sensitivity to the thermal scattering treatment of hydrogen in the U-Er-Zr-H fuel.

  1. A refuge for inorganic chemistry: Bunsen's Heidelberg laboratory.

    Science.gov (United States)

    Nawa, Christine

    2014-05-01

    Immediately after its opening in 1855, Bunsen's Heidelberg laboratory became iconic as the most modern and best equipped laboratory in Europe. Although comparatively modest in size, the laboratory's progressive equipment made it a role model for new construction projects in Germany and beyond. In retrospect, it represents an intermediate stage of development between early teaching facilities, such as Liebig's laboratory in Giessen, and the new 'chemistry palaces' that came into existence with Wöhler's Göttingen laboratory of 1860. As a 'transition laboratory,' Bunsen's Heidelberg edifice is of particular historical interest. This paper explores the allocation of spaces to specific procedures and audiences within the laboratory, and the hierarchies and professional rites of passage embedded within it. On this basis, it argues that the laboratory in Heidelberg was tailored to Bunsen's needs in inorganic and physical chemistry and never aimed at a broad-scale representation of chemistry as a whole. On the contrary, it is an example of early specialisation within a chemical laboratory preceding the process of differentiation into chemical sub-disciplines. Finally, it is shown that the relatively small size of this laboratory, and the fact that after ca. 1860 no significant changes were made within the building, are inseparably connected to Bunsen's views on chemistry teaching.

  2. Development of a research nuclear reactor simulator using LABVIEW®

    Energy Technology Data Exchange (ETDEWEB)

    Lage, Aldo Marcio Fonseca; Mesquita, Amir Zacarias; Pinto, Antonio Juscelino; Souza, Luiz Claudio Andrade [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2015-07-01

    The International Atomic Energy Agency recommends the use of safety and friendly interfaces for monitoring and controlling the operational parameters of the nuclear reactors. The most important variable in the nuclear reactors control is the power released by fission of the fuel in the core which is directly proportional to neutron flux. It was developed a digital system to simulate the neutron evolution flux and monitoring their interaction on the other operational parameters. The control objective is to bring the reactor power from its source level (mW) to a few W. It is intended for education of basic reactor neutronic principles such as the multiplication factor, criticality, reactivity, period, delayed neutron and control by rods. The 250 kW IPR-R1 TRIGA research reactor at Nuclear Technology Development Center - CDTN (Belo Horizonte/Brazil) was used as reference. TRIGA reactors, developed by General Atomics (GA), are the most widely used research reactor in the world. They are cooled by light water under natural convection and are characterized by being inherently safety. The simulation system was developed using the LabVIEW® (Laboratory Virtual Instruments Engineering Workbench) software, considering the modern concept of virtual instruments (VI's). The main purpose of the system is to provide to analyze the behavior, and the tendency of some processes that occur in the reactor using a user-friendly operator interface. The TRIGA simulator system will allow the study of parameters, which affect the reactor operation, without the necessity of using the facility.(author)

  3. Activities for extending the lifetime of MINT research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Bokhari, Adnan; Kassim, Mohammad Suhaimi [Malaysian Inst. for Nuclear Technology Research (MINT), Bangi, Kajang (Malaysia)

    1998-10-01

    MINT TRIGA Reactor is a 1-MW swimming pool nuclear reactor commissioned in June 1982. Since then, it has been used for research, isotope production, neutron activation, neutron radiography and manpower training. The total operating time till the end on September 1997 is 16968 hours with cumulative total energy release of 11188 MW-hours. After more than fifteen years of successful operation, some deterioration in components and associated systems has been observed. This paper describes some of the activities carried out to increase the lifetime and to reduce the shutdown time of the reactor. (author)

  4. Collinear laser spectroscopy of calcium and tin at TRIGA-LASER and ISOLDE; Kollineare Laserspektroskopie an Calcium und Zinn an TRIGA-LASER und ISOLDE

    Energy Technology Data Exchange (ETDEWEB)

    Gorges, Christian

    2017-05-10

    From the optical spectra of the ions and atoms we can extract the spin, the change in mean square charge radius, the magnetic dipole moments, and the electric quadrupole moments. To investigate these properties, collinear laser spectroscopy is a particular appropriate method because it is universally applicable, very efficient and allows to investigate short-lived particles with lifetimes in the range of milliseconds and production rates of a few hundred particles per second. Within the scope of this work, a control system (TRITON) was developed for the collinear laser spectroscopy experiment LASPEC at FAIR, which allows distributed access to the various control elements and is therefore very flexible. It was developed and tested on the LASPEC prototype, the TRIGA-LASER experiment at the research reactor TRIGA Mainz. Using TRITON, the isotope shifts of the stable calcium isotopes {sup 40,42,44,48}Ca have been measured in the 4s{sub 1/2}→4p{sub 3/2} transition with an accuracy, which exceeded the previous literature values by about one order of magnitude. These data were the basis for the precise determination of the nuclear charge radii of the calcium isotopes {sup 49-52}Ca from collinear laser spectroscopy installation COLLAPS at ISOLDE/CERN. Furthermore, developments for spectroscopy on {sup 53,54}Ca at COLLAPS have been carried out, where TRITON was also used. The production rates for {sup 54}Ca are about one ion per second and optical detection is no longer possible. Instead, the technique of optical pumping with state selective charge exchange and β-detection of single ions was implemented at COLLAPS and successfully demonstrated at {sup 52}Ca. With these applications, the performance and operational readiness of the LASPEC control system for FAIR was successfully demonstrated. In the second part of the work, spectroscopy on the tin isotopes {sup 109,112-134}Sn has been performed at the COLLAPS experiment. Several electromagnetic moments close to the N=82

  5. [Heidelberger study on psychoanalytic therapy of children and adolescents: methodology].

    Science.gov (United States)

    Fahrig, H

    1999-11-01

    In the representative studies published so far on the outcome of analytic child psychotherapy (Dührssen 1964; Fonagy and Target 1996) no techniques of treatment were mentioned. The following paper describes in detail the technique of treatment on which the Heidelberg Study "On the Therapeutic Outcome in Child and Adolescent Psychotherapy" is based, as it developed from 1975 to 1993 at the Heidelberg Institute for Child and Adolescent Psychotherapy. Starting from Piaget's findings that the cognitive faculties of a child up to the age of 11 completely differ from those of an adult and taking into consideration the cerebral information processing and "the intellect pervadet sensory" (Schopenhauer) it is demonstrated that children take their intrapsychic and interpersonal conflicts into analytic play therapy or into role play on analogous levels. Protected by a safe distance from being aware of their conflicts they will on the analogous levels understand, work through, partially solve their conflicts and make use of it in reality without conscious recognition. The term "analogous level" is defined and the manifold possibilities of therapeutic intervention on this level are demonstrated. The efficacy of therapeutic treatment on analogous levels is discussed.

  6. Helical tomotherapy. Experiences of the first 150 patients in Heidelberg

    Energy Technology Data Exchange (ETDEWEB)

    Sterzing, F.; Schubert, K.; Sroka-Perez, G.; Kalz, J.; Debus, J.; Herfarth, K. [Dept. of Radiation Oncology, Univ. of Heidelberg (Germany)

    2008-01-15

    Background and purpose: helical tomotherapy was introduced into clinical routine at the Department of Radiation Oncology, University Hospital of Heidelberg, Germany, in July 2006. This report is intended to describe the experience with the first 150 patients treated with helical tomotherapy. Patient selection, time effort, handling of daily image guidance with megavoltage (MV) CT, and quality of radiation plans shall be assessed. Patients and methods: between July 2006 and May 2007, 150 patients were treated with helical tomotherapy in the University Hospital of Heidelberg. Mean age was 60 years with a minimum of 30 years and a maximum of 85 years. 79 of these patients received radiotherapy as a part of multimodal treatment pre- or postoperatively, 17 patients received treatment as a combined radiochemotherapy. 76% were treated with curative intent. Radiotherapy sites were central nervous system (n = 7), head and neck (n = 28), thoracic (n = 37), abdominal (n = 58) and skeletal system (n = 20). Most common tumor entities were prostate cancer (n = 28), breast cancer (n = 17), gastrointestinal tumors (n = 19), pharyngeal carcinoma (n = 14), lymphoma (n = 13), metastatic disease (bone n = 14, liver n = 6, lung n = 4, lymph node n = 2), sarcoma (n = 8), malignant pleural mesothelioma (n = 5), ovarian cancer treated with whole abdominal irradiation (n = 4), lung cancer (n = 3), skin malignancies (n = 3), chordoma (n = 2), meningioma (n = 2), one ependymoma and one medulloblastoma treated with craniospinal axis irradiation (n = 2), and others (n = 4). Nine patients were treated with single-fraction radiosurgery, nine with image-guided spinal reirradiation, and twelve patients were treated at multiple targets simultaneously. A pretreatment MV-CT scan was performed in 98.2% of the 3,026 fractions applied. After matching with the kilovoltage planning CT, corrections for translations and rotation around longitudinal axis (roll) were done. Results: mean time on table was 24

  7. Six hundred years: Heidelberg University--crisis and achievements.

    Science.gov (United States)

    Junker, D

    1987-01-01

    Throughout its 600 years, Heidelberg University has endured the social and political upheavals of history, repeatedly rising like a phoenix from the ashes of a series of disasters to fulfill its mission as a center of learning and research. Founded in 1386, and buffeted by wars, plaques, and diverse political and social systems ever since, the university has developed along lines determined as much by regional, European, and world politics as by the dynamics inherent in its disciplines. Its history may be divided into the following six historical phases: (1) the scholastic university of the late Middle Ages (1386-1556); (2) the Protestant university (1556-1685); (3) the Catholic university (1685-1807); (4) the university in the age of liberalism and nationalism (1803-1933); (5) the university during National Socialism (1933-1945); and (6) the contemporary university and its efforts to cope with the explosion of knowledge, steadily growing student numbers, and other problems related to growth, expansion, and diversification in all disciplines (1945 to the present).

  8. The Heidelberg Appendicitis Score Predicts Perforated Appendicitis in Children.

    Science.gov (United States)

    Boettcher, Michael; Günther, Patrick; Breil, Thomas

    2017-10-01

    In the future, surgical management of pediatric appendicitis might become limited to nonperforating appendicitis. Thus, it becomes increasingly important to differentiate advanced from simple appendicitis and to predict perforated appendicitis among a group of children with right-sided abdominal pain, which was the aim of this study. An institutionally approved, single-center retrospective analysis of all patients with appendectomy from January 2009 to December 2010 was conducted. All diagnostic aspects were evaluated to identify predictors and differentiators of perforated appendicitis. In 2 years, 157 children suffered from appendicitis. Perforation occurred in 47 (29.9%) of the patients. C-reactive protein (CRP) levels higher than 20 mg/dL ( P = .037) and free abdominal fluid on ultrasonography ( P = .031) are the most important features to differentiate perforated from simple appendicitis. Moreover, all children with perforation had a positive Heidelberg Appendicitis Score (HAS). A negative HAS excludes perforation in all cases (negative predictive value = 100%). Perforated appendicitis can be ruled out by the HAS. In a cohort with right-sided abdominal pain, perforation should be considered in children with high CRP levels and free fluids or abscess formation on ultrasound.

  9. High-intensity power-resolved radiation imaging of an operational nuclear reactor.

    Science.gov (United States)

    Beaumont, Jonathan S; Mellor, Matthew P; Villa, Mario; Joyce, Malcolm J

    2015-10-09

    Knowledge of the neutron distribution in a nuclear reactor is necessary to ensure the safe and efficient burnup of reactor fuel. Currently these measurements are performed by in-core systems in what are extremely hostile environments and in most reactor accident scenarios it is likely that these systems would be damaged. Here we present a compact and portable radiation imaging system with the ability to image high-intensity fast-neutron and gamma-ray fields simultaneously. This system has been deployed to image radiation fields emitted during the operation of a TRIGA test reactor allowing a spatial visualization of the internal reactor conditions to be obtained. The imaged flux in each case is found to scale linearly with reactor power indicating that this method may be used for power-resolved reactor monitoring and for the assay of ongoing nuclear criticalities in damaged nuclear reactors.

  10. High-intensity power-resolved radiation imaging of an operational nuclear reactor

    Science.gov (United States)

    Beaumont, Jonathan S.; Mellor, Matthew P.; Villa, Mario; Joyce, Malcolm J.

    2015-01-01

    Knowledge of the neutron distribution in a nuclear reactor is necessary to ensure the safe and efficient burnup of reactor fuel. Currently these measurements are performed by in-core systems in what are extremely hostile environments and in most reactor accident scenarios it is likely that these systems would be damaged. Here we present a compact and portable radiation imaging system with the ability to image high-intensity fast-neutron and gamma-ray fields simultaneously. This system has been deployed to image radiation fields emitted during the operation of a TRIGA test reactor allowing a spatial visualization of the internal reactor conditions to be obtained. The imaged flux in each case is found to scale linearly with reactor power indicating that this method may be used for power-resolved reactor monitoring and for the assay of ongoing nuclear criticalities in damaged nuclear reactors. PMID:26450669

  11. Performance Test for Neutron Detector and Associated System using Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Seongwoo; Park, Sung Jae; Cho, Man Soon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Oh, Se Hyun [USERS, Daejeon (Korea, Republic of); Shin, Ho Cheol [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    SPND (Self-Powered Neutron Detector) has been developed to extend its lifespan. ENFMS (Ex-Core Flux Monitoring System) of pressurized water reactor has been also improved. After the development and improvement, their performance must be verified under the neutron irradiation environment. We used a research reactor for the performance verification of neutron detector and associated system because the research reactor can meet the neutron flux level of commercial nuclear reactor. In this paper, we report the performance verification method and result for the SPND and ENFMS using the research reactor. The performance tests for the SPND and ENFMS were conducted using UCI TRIGA reactor. The test environment of commercial reactor’s neutron flux level must be required. However, it is difficult to perform the test in the commercial rector due to the constraint of time and space. The research reactor can be good alternative neutron source for the test of neutron detectors and associated system.

  12. Development of a nuclear reactor control system simulator using virtual instruments

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, Antonio Juscelino; Mesquita, Amir Zacarias; Lameiras, Fernando Soares, E-mail: ajp@cdtn.b, E-mail: amir@cdtn.b, E-mail: fsl@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2011-07-01

    The International Atomic Energy Agency recommends the use of safety and friendly interfaces for monitoring and controlling the operational parameters of the nuclear reactors. This article describes a digital system being developed to simulate the behavior of the operating parameters using virtual instruments. The control objective is to bring the reactor power from its source level (mW) to a full power (kW). It is intended for education of basic reactor neutronic and thermohydraulic principles such as the multiplication factor, criticality, reactivity, period, delayed neutron, control by rods, fuel and coolant temperatures, power, etc. The 250 kW IPR-R1 TRIGA research reactor at Nuclear Technology Development Centre - CDTN was used as reference. TRIGA reactors, developed by General Atomics (GA), are the most widely used research reactor in the world. The simulator system is being developed using the LabVIEW (Laboratory Virtual Instruments Engineering Workbench) software, considering the modern concept of virtual instruments (VI's) using electronic processor and visual interface in video monitor. The main purpose of the system is to provide training tools for instructors and students, allowing navigating by user-friendly operator interface and monitoring tendencies of the operational variables. It will be an interactive tool for training and teaching and could be used to predict the reactor behavior. Some scenarios are presented to demonstrate that it is possible to know the behavior of some variables from knowledge of input parameters. The TRIGA simulator system will allow the study of parameters, which affect the reactor operation, without the necessity of using the facility. (author)

  13. A tomography system at the thermal neutron column of the ENEA Casaccia TRIGA reactor

    CERN Document Server

    Rosa, R; Santoro, E; Massari, R; Sangiovanni, G; Storelli, L

    2002-01-01

    The developed system is intended for use at a collimated thermal neutron beam with a flux of about 10 sup 6 n/cm sup 2 s. The system works with a cooled CCD array (192 x 165 pixels) and an intensifier for light from a NE426 scintillator with traditional optical coupling. A fine mechanical regulation system allows an accurate positioning of the tomographer, also ensuring the alignment of the CCD array with the rotation and translation axes. The acquisition of 200 projections is carried out in about 30 min with a reconstruction time (40 min max) depending on the reconstruction-matrix order. Radiography and tomography of significant objects are illustrated. The reconstruction algorithm, including spatial and temporal inhomogeneity corrections and filters, was tested with good results for projections up to 512 x 512 pixels. (orig.)

  14. Neutron Flux Monitoring Based on Blind Source Separation Algorithms in Moroccan TRIGA MARK II Reactor

    Directory of Open Access Journals (Sweden)

    Hanane Arahmane

    2017-01-01

    Full Text Available We present an overview of fission chamber’s functioning modes, theoretical aspects of the nonnegative matrix factorization methods, and the opportunities that offer neutron data processing in order to achieve neutron flux monitoring tasks. Indeed, it is a part of research project that aimed at applying Blind Source Separation methods for in-core and ex-core neutron flux monitoring while analyzing the outputs of fission chamber. The latter could be used as a key issue for control, fuel management, safety concerns, and material irradiation experiments. The Blind Source Separation methods had been used in many scientific fields such as biomedical engineering and telecommunications. Recently, they were used for gamma spectrometry data processing. The originality of this research work is to apply these powerful methods to process the fission chamber output signals. We illustrated the effectiveness of this tool using simulated fission chamber signals.

  15. A tomography system at the thermal neutron column of the ENEA Casaccia TRIGA reactor

    Science.gov (United States)

    Rosa, R.; Festinesi, A.; Massari, R.; Sangiovanni, G.; Santoro, E.; Storelli, L.

    The developed system is intended for use at a collimated thermal neutron beam with a flux of about 106 n/cm2s. The system works with a cooled CCD array (192×165 pixels) and an intensifier for light from a NE426 scintillator with traditional optical coupling. A fine mechanical regulation system allows an accurate positioning of the tomographer, also ensuring the alignment of the CCD array with the rotation and translation axes. The acquisition of 200 projections is carried out in about 30min with a reconstruction time (40min max) depending on the reconstruction-matrix order. Radiography and tomography of significant objects are illustrated. The reconstruction algorithm, including spatial and temporal inhomogeneity corrections and filters, was tested with good results for projections up to 512×512 pixels.

  16. Related activities on management of ageing of Dalat Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Pham Van Lam [Reactor Dept., Nuclear Research Institute, Dalat (Viet Nam)

    1998-10-01

    The Dalat Nuclear Research Reactor (DNRR) is a pool type research reactor which was reconstructed in 1982 from the previous 250 kW TRIGA-MARK II reactor. The reactor core, the control and instrumentation system, the primary and secondary cooling systems as well as other associated systems were newly designed and installed. The renovated reactor reached its initial criticality in November 1983 and attained its nominal power of 500 kW in February 1984. Since then DNRR has been operated safely. Retained structures of the former reactor such as the reactor aluminum tank, the graphite reflector, the thermal column, the horizontal beam tubes and the radiation concrete shielding are 35 years old. During the recent years, in-service inspection has been carried out, the reactor control and instrumentation system were renovated due to ageing and obsolescence of its components, reactor general inspection and refurbishment were performed. Efforts are being made to cope with ageing of old reactor components to maintain safe operation of the DNRR. (author)

  17. Independent Confirmatory Survey Report for the University of Arizona Nuclear Reactor Laboratory, Tucson, Arizona

    Energy Technology Data Exchange (ETDEWEB)

    Nick A. Altic

    2011-11-11

    The University of Arizona (University) research reactor is a TRIGA swimming pool type reactor designed by General Atomics and constructed at the University in 1958. The reactor first went into operation in December of 1958 under U.S. Nuclear Regulatory Commission (NRC) license R-52 until final shut down on May 18, 2010. Initial site characterization activities were conducted in February 2009 during ongoing reactor operations to assess the radiological status of the Nuclear Reactor Laboratory (NRL) excluding the reactor tank, associated components, and operating systems. Additional post-shutdown characterization activities were performed to complete characterization activities as well as verify assumptions made in the Decommissioning Plan (DP) that were based on a separate activation analysis (ESI 2009 and WMG 2009). Final status survey (FSS) activities began shortly after the issuance of the FSS plan in May 2011. The contractor completed measurement and sampling activities during the week of August 29, 2011.

  18. Modeling of γ field around irradiated TRIGA fuel elements by R2S method

    Directory of Open Access Journals (Sweden)

    Klemen Ambrožič

    2017-01-01

    An example of its capabilities is presented in terms of evaluation of utilization of JSI TRIGA nuclear fuel as a viable γ-ray source. In the model, fresh nuclear fuel is considered and a silicon pipe sample is modeled in. Fuel activities, dose and kerma rates on the sample, as well as emitted γ-ray spectra and isotopic contribution to the contact dose are calculated and presented.

  19. The TRIGA board for a fast muon trigger for E771

    Science.gov (United States)

    Antoniazzi, L.; Introzzi, G.; Liguori, G.; Nardo', R.; Torre, P.

    1992-05-01

    The muon trigger logic of experiment E771 at Fermilab is described, with emphasis on the design and development of the board dedicated to such a trigger. A programmable gate arrays microchip has been implemented on the TRIGA board, to achieve a flexible kind of trigger. The use of a programmable trigger allows to optimize the signal to background ratio according to the working conditions of the muon detector.

  20. Effects of WR-1065 and WR-151326 on survival and neoplastic transformation in C3H/10T1/2 cells exposed to TRIGA or JANUS fission neutrons.

    Science.gov (United States)

    Balcer-Kubiczek, E K; Harrison, G H; Hill, C K; Blakely, W F

    1993-01-01

    We demonstrated the ability of aminothiols WR-1065 and WR-151326, each at concentration 1 mM, to protect C3H/10T1/2 cells against the transforming effects of fission neutrons under two distinct sets of experimental conditions. Experiments with WR-1065 were performed with stationary cultures of C3H/10T1/2 cells, and a TRIGA reactor-generated fission neutron field at the Armed Forces Radiobiology Research Institute (USA). Experiments with WR-151326 were performed with proliferating cultures of C3H/10T1/2 cells and a JANUS reactor-generated fission neutron field at the Argonne National Laboratory (USA). Radioprotectors were present before, during, and after irradiation for total-periods of 35 min (WR-151326; 10 min pre-incubation) or 1 h (WR-1065; 30 min pre-incubation). Bioavailability of WR-1065 and WR-151326 in extracellular medium under experimental conditions simulating those of the transformation experiments was studied by measuring oxidation rates in the presence of attached C3H/10T1/2 cells in plateau and exponential phase of growth for periods of up to 5 h. Estimated half-lives for autoxidation of WR-1065 or WR-151326 were approximately 8 min or 1 h regardless of the proliferative status of cells. In the absence of WR-compounds, dose-response data for transformation induction by neutrons from TRIGA and JANUS reactors were fitted to a common curve with a linear coefficient of about 7 x 10(-4)/Gy. WR-151326 and WR-1065 were found to provide significant radioprotection by factors of 1.79 +/- 0.08 and 3.23 +/- 0.19, respectively, against fission neutron-induced neoplastic transformation. No significant protection against neutron-induced cell lethality was observed.

  1. Analysis of neutron flux distribution for the validation of computational methods for the optimization of research reactor utilization.

    Science.gov (United States)

    Snoj, L; Trkov, A; Jaćimović, R; Rogan, P; Zerovnik, G; Ravnik, M

    2011-01-01

    In order to verify and validate the computational methods for neutron flux calculation in TRIGA research reactor calculations, a series of experiments has been performed. The neutron activation method was used to verify the calculated neutron flux distribution in the TRIGA reactor. Aluminium (99.9 wt%)-Gold (0.1 wt%) foils (disks of 5mm diameter and 0.2mm thick) were irradiated in 33 locations; 6 in the core and 27 in the carrousel facility in the reflector. The experimental results were compared to the calculations performed with Monte Carlo code MCNP using detailed geometrical model of the reactor. The calculated and experimental normalized reaction rates in the core are in very good agreement for both isotopes indicating that the material and geometrical properties of the reactor core are modelled well. In conclusion one can state that our computational model describes very well the neutron flux and reaction rate distribution in the reactor core. In the reflector however, the accuracy of the epithermal and thermal neutron flux distribution and attenuation is lower, mainly due to lack of information about the material properties of the graphite reflector surrounding the core, but the differences between measurements and calculations are within 10%. Since our computational model properly describes the reactor core it can be used for calculations of reactor core parameters and for optimization of research reactor utilization. Copyright © 2010 Elsevier Ltd. All rights reserved.

  2. the heidelberg catechism in the memory of the dutch reformed church

    African Journals Online (AJOL)

    of the article deals with the theory of memory, the development of memory culture in communities, and the significance of such an analysis for historical thinking. The third part provides four sets of examples of Heidelberg Catechism recollections as a contribution to analyses of the memory culture of the DRC in the late 19th ...

  3. Phenotypic and Genotypic Characterization of Animal-Source Salmonella Heidelberg Isolates

    Directory of Open Access Journals (Sweden)

    Kristin A. Clothier

    2016-01-01

    Full Text Available Salmonella enterica serotype Heidelberg (S. Heidelberg is frequently implicated in human foodborne Salmonella infections and often produces more severe clinical disease than other serotypes. Livestock and poultry products represent a potential risk for transmission to humans. The purpose of this study was to evaluate 49 S. Heidelberg veterinary isolates for exponential growth rate (EGR, PFGE pattern, and antimicrobial resistance to evaluate these parameters as mechanisms by which S. Heidelberg emerged as a virulent foodborne pathogen. Isolates were categorized by species of origin; clinical or environmental sources; and time frame of recovery. Growth rates were determined in nutrient media using serial dilutions and colony counts; PFGE was performed according to the CDC PulseNet protocol. Minimum inhibitory concentration and susceptibility determinations were performed against antimicrobials important in human medicine. Eighteen unique PFGE patterns were detected in the isolates tested. Antimicrobial resistance was significantly greater (P<0.05 for ten of 15 drugs in clinical over environmental isolates; for four drugs between the time frames; and for ten drugs between species of origin. The large genetic diversity present in isolates of this serotype may convey competitive advantages to this organism, while the presence of antimicrobial resistance represents a potential zoonotic risk via animal-source food products.

  4. THE JOINT EUROPEAN-UNITED STATES NDEA INSTITUTE FOR ADVANCED STUDY, MANNHEIM-HEIDELBERG.

    Science.gov (United States)

    VAN TESLAAR, A.P.

    THE EUROPEAN COORDINATOR AND RESIDENT CO-DIRECTOR OF THE MANNHEIM-HEIDELBERG BRANCH OF THE SUMMER 1966 LANGUAGE INSTITUTE IN FRANCE AND GERMANY PREPARED THIS EVALUATION OF THE INTERNATIONAL VENTURE. DESIGNED TO ANALYZE THE INNOVATIONAL ASPECTS OF THE 1966 INSTITUTE WITH THE IDEA OF STRENGTHENING THE EFFECTIVENESS OF THIS AND SIMILAR PROGRAMS, THE…

  5. ‘The joy of Law: A revisitation of the usus normativus in the Heidelberg Catechism’

    NARCIS (Netherlands)

    van Vlastuin, W.

    2015-01-01

    In this essay, the author studies the so-called third use of the law in the Heidelberg Catechism, as a representative creed in the Calvinistic confession. In the introduction several current problems surrounding the normative use of the law are investigated, which leads to the research question: How

  6. The Heidelberg Catechism on prayer: relevance of a 16 th century ...

    African Journals Online (AJOL)

    In a world characterized by power abuse and violence, where and how would people with the life-affirming ethos of God's alternative kingdom be formed? In view of this challenge, the essay explores the potential of the third part of the Heidelberg Catechism (on prayer) for moral formation in Christian households.

  7. what profit is the reign of christ to us? the heidelberg catechism and ...

    African Journals Online (AJOL)

    the wide breadth of meaning of “hate” and argues that the catechism offers a deep and realistic understanding of sin. Above all ... E-mail: maw.pnj@web.de. Produced by SUN MeDIA Bloemfontein .... contexts the deep harmartiological insights of the Heidelberg Catechism. To take just one more example from my own ...

  8. Control Rod Malfunction at the NRAD Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Thomas L. Maddock

    2010-05-01

    The neutron Radiography Reactor (NRAD) is a training, research, and isotope (TRIGA) reactor located at the INL. The reactor is normally shut down by the insertion of three control rods that drop into the core when power is removed from electromagnets. During a routine shutdown, indicator lights on the console showed that one of the control rods was not inserted. It was initially thought that the indicator lights were in error because of a limit switch that was out of adjustment. Through further testing, it was determined that the control rod did not drop when the scram switch was initially pressed. The control rod anomaly led to a six month shutdown of the reactor and an in depth investigation of the reactor protective system. The investigation looked into: scram switch operation, console modifications, and control rod drive mechanisms. A number of latent issues were discovered and corrected during the investigation. The cause of the control rod malfunction was found to be a buildup of corrosion in the control rod drive mechanism. The investigation resulted in modifications to equipment, changes to both operation and maintenance procedures, and additional training. No reoccurrences of the problem have been observed since corrective actions were implemented.

  9. Background studies for the MINER Coherent Neutrino Scattering reactor experiment

    Energy Technology Data Exchange (ETDEWEB)

    Agnolet, G.; Baker, W. [Department of Physics and Astronomy, and the Mitchell Institute for Fundamental Physics and Astronomy, Texas A& M University, College Station, TX 77843 (United States); Barker, D. [School of Physics & Astronomy, University of Minnesota, Minneapolis, MN 55455 (United States); Beck, R. [Department of Physics and Astronomy, and the Mitchell Institute for Fundamental Physics and Astronomy, Texas A& M University, College Station, TX 77843 (United States); Carroll, T.J.; Cesar, J. [Department of Physics, University of Texas at Austin, Austin, TX 78712 (United States); Cushman, P. [School of Physics & Astronomy, University of Minnesota, Minneapolis, MN 55455 (United States); Dent, J.B. [Department of Physics, University of Louisiana at Lafayette, Lafayette, LA 70504 (United States); De Rijck, S. [Department of Physics, University of Texas at Austin, Austin, TX 78712 (United States); Dutta, B. [Department of Physics and Astronomy, and the Mitchell Institute for Fundamental Physics and Astronomy, Texas A& M University, College Station, TX 77843 (United States); Flanagan, W. [Department of Physics, University of Texas at Austin, Austin, TX 78712 (United States); Fritts, M. [School of Physics & Astronomy, University of Minnesota, Minneapolis, MN 55455 (United States); Gao, Y. [Department of Physics and Astronomy, and the Mitchell Institute for Fundamental Physics and Astronomy, Texas A& M University, College Station, TX 77843 (United States); Department of Physics & Astronomy, Wayne State University, Detroit 48201 (United States); Harris, H.R.; Hays, C.C. [Department of Physics and Astronomy, and the Mitchell Institute for Fundamental Physics and Astronomy, Texas A& M University, College Station, TX 77843 (United States); Iyer, V. [School of Physical Sciences, National Institute of Science Education and Research, Jatni - 752050 (India); and others

    2017-05-01

    The proposed Mitchell Institute Neutrino Experiment at Reactor (MINER) experiment at the Nuclear Science Center at Texas A&M University will search for coherent elastic neutrino-nucleus scattering within close proximity (about 2 m) of a 1 MW TRIGA nuclear reactor core using low threshold, cryogenic germanium and silicon detectors. Given the Standard Model cross section of the scattering process and the proposed experimental proximity to the reactor, as many as 5–20 events/kg/day are expected. We discuss the status of preliminary measurements to characterize the main backgrounds for the proposed experiment. Both in situ measurements at the experimental site and simulations using the MCNP and GEANT4 codes are described. A strategy for monitoring backgrounds during data taking is briefly discussed.

  10. Source term derivation and radiological safety analysis for the TRICO II research reactor in Kinshasa

    Energy Technology Data Exchange (ETDEWEB)

    Muswema, J.L., E-mail: jeremie.muswem@unikin.ac.cd [Faculty of Science, University of Kinshasa, P.O. Box 190, KIN XI (Congo, The Democratic Republic of the); Ekoko, G.B. [Faculty of Science, University of Kinshasa, P.O. Box 190, KIN XI (Congo, The Democratic Republic of the); Lukanda, V.M. [Faculty of Science, University of Kinshasa, P.O. Box 190, KIN XI (Congo, The Democratic Republic of the); Democratic Republic of the Congo' s General Atomic Energy Commission, P.O. Box AE1 (Congo, The Democratic Republic of the); Lobo, J.K.-K. [Faculty of Science, University of Kinshasa, P.O. Box 190, KIN XI (Congo, The Democratic Republic of the); Darko, E.O. [Radiation Protection Institute, Ghana Atomic Energy Commission, P.O. Box LG 80, Legon, Accra (Ghana); Boafo, E.K. [University of Ontario Institute of Technology, 2000 Simcoe St. North, Oshawa, ONL1 H7K4 (Canada)

    2015-01-15

    Highlights: • Atmospheric dispersion modeling for two credible accidents of the TRIGA Mark II research reactor in Kinshasa (TRICO II) was performed. • Radiological safety analysis after the postulated initiating events (PIE) was also carried out. • The Karlsruhe KORIGEN and the HotSpot Health Physics codes were used to achieve the objectives of this study. • All the values of effective dose obtained following the accident scenarios were below the regulatory limits for reactor staff members and the public, respectively. - Abstract: The source term from the 1 MW TRIGA Mark II research reactor core of the Democratic Republic of the Congo was derived in this study. An atmospheric dispersion modeling followed by radiation dose calculation were performed based on two possible postulated accident scenarios. This derivation was made from an inventory of peak radioisotope activities released in the core by using the Karlsruhe version of isotope generation code KORIGEN. The atmospheric dispersion modeling was performed with HotSpot code, and its application yielded to radiation dose profile around the site using meteorological parameters specific to the area under study. The two accident scenarios were picked from possible accident analyses for TRIGA and TRIGA-fueled reactors, involving the case of destruction of the fuel element with highest activity release and a plane crash on the reactor building as the worst case scenario. Deterministic effects of these scenarios are used to update the Safety Analysis Report (SAR) of the reactor, and for its current version, these scenarios are not yet incorporated. Site-specific meteorological conditions were collected from two meteorological stations: one installed within the Atomic Energy Commission and another at the National Meteorological Agency (METTELSAT), which is not far from the site. Results show that in both accident scenarios, radiation doses remain within the limits, far below the recommended maximum effective

  11. Meeting report of the 6th Heidelberg Myeloma Workshop: current status and developments in diagnosis and therapy of multiple myeloma.

    Science.gov (United States)

    Merz, Maximilian; Raab, Marc S; Goldschmidt, Hartmut; Hillengass, Jens

    2017-12-01

    The 6th Heidelberg Myeloma Workshop was held on May 5th and 6th, 2017 in the lecture hall of the University Hospital Heidelberg. Main topics of the meeting were (1) biology and genomics of multiple myeloma, (2) diagnostics and prognostic factors, (3) role of immunotherapy in multiple myeloma, as well as (4) therapy of multiple myeloma-drugs and treatment strategies. The landscape for the treatment of newly diagnosed and relapsed disease has significantly changed since the last Heidelberg Myeloma Workshop in 2015. Updates on the current developments were presented at the meeting.

  12. Validation of cooking methods using shell eggs inoculated with Salmonella serotypes Enteritidis and Heidelberg.

    Science.gov (United States)

    Davis, A L; Curtis, P A; Conner, D E; McKee, S R; Kerth, L K

    2008-08-01

    Salmonella enterica serotype Enteritidis has long been associated with eggs, and more recently, Salmonella enterica serotype Heidelberg has also become associated with eggs. This study was undertaken to determine whether Salmonella Enteritidis and Salmonella Heidelberg are effectively eliminated from eggs by various cooking methods. Seven cooking methods were chosen--hard and soft cooked, scrambled, over easy, sunny-side up, poached, and free poached--and a pan insert and the free-flowing method were used. Shell eggs, purchased from a grocery store, were inoculated with Salmonella and cooked. The cooked eggs were analyzed by USDA-approved methods for Salmonella recovery. Findings indicated that existing cooking methods for the hard-cooked, soft-cooked, and poaching methods were safe. However, the same was not true for the current sunny-side-up, over-easy, and scrambled egg cooking methods.

  13. H Reactor

    Data.gov (United States)

    Federal Laboratory Consortium — The H Reactor was the first reactor to be built at Hanford after World War II.It became operational in October of 1949, and represented the fourth nuclear reactor on...

  14. DNA sequence analysis of plasmids from multidrug resistant Salmonella enterica serotype Heidelberg isolates.

    Directory of Open Access Journals (Sweden)

    Jing Han

    Full Text Available Salmonella enterica serovar Heidelberg is among the most detected serovars in swine and poultry, ranks among the top five serotypes associated with human salmonellosis and is disproportionately associated with invasive infections and mortality in humans. Salmonella are known to carry plasmids associated with antimicrobial resistance and virulence. To identify plasmid-associated genes in multidrug resistant S. enterica serovar Heidelberg, antimicrobial resistance plasmids from five isolates were sequenced using the 454 LifeSciences pyrosequencing technology. Four of the isolates contained incompatibility group (Inc A/C multidrug resistance plasmids harboring at least eight antimicrobial resistance genes. Each of these strains also carried a second resistance plasmid including two IncFIB, an IncHI2 and a plasmid lacking an identified Inc group. The fifth isolate contained an IncI1 plasmid, encoding resistance to gentamicin, streptomycin and sulfonamides. Some of the IncA/C plasmids lacked the full concert of transfer genes and yet were able to be conjugally transferred, likely due to the transfer genes carried on the companion plasmids in the strains. Several non-IncA/C resistance plasmids also carried putative virulence genes. When the sequences were compared to previously sequenced plasmids, it was found that while all plasmids demonstrated some similarity to other plasmids, they were unique, often due to differences in mobile genetic elements in the plasmids. Our study suggests that Salmonella Heidelberg isolates harbor plasmids that co-select for antimicrobial resistance and virulence, along with genes that can mediate the transfer of plasmids within and among other bacterial isolates. Prevalence of such plasmids can complicate efforts to control the spread of S. enterica serovar Heidelberg in food animal and human populations.

  15. Molecular detection assay of five Salmonella serotypes of public interest: Typhimurium, Enteritidis, Newport, Heidelberg, and Hadar.

    Science.gov (United States)

    Bugarel, M; Tudor, A; Loneragan, G H; Nightingale, K K

    2017-03-01

    Foodborne illnesses due to Salmonella represent an important public-health concern worldwide. In the United States, a majority of Salmonella infections are associated with a small number of serotypes. Furthermore, some serotypes that are overrepresented among human disease are also associated with multi-drug resistance phenotypes. Rapid detection of serotypes of public-health concern might help reduce the burden of salmonellosis cases and limit exposure to multi-drug resistant Salmonella. We developed a two-step real-time PCR-based rapid method for the identification and detection of five Salmonella serotypes that are either overrepresented in human disease or frequently associated with multi-drug resistance, including serotypes Enteritidis, Typhimurium, Newport, Hadar, and Heidelberg. Two sets of four markers were developed to detect and differentiate the five serotypes. The first set of markers was developed as a screening step to detect the five serotypes; whereas, the second set was used to further distinguish serotypes Heidelberg, Newport and Hadar. The utilization of these markers on a two-step investigation strategy provides a diagnostic specificity of 97% for the detection of Typhimurium, Enteritidis, Heidelberg, Infantis, Newport and Hadar. The diagnostic sensitivity of the detection makers is >96%. The availability of this two-step rapid method will facilitate specific detection of Salmonella serotypes that contribute to a significant proportion of human disease and carry antimicrobial resistance. Published by Elsevier B.V.

  16. ASSESSMENT OF BENZOPHENANTHRIDINE AND PROTOPINE ALKALOIDS IN BROILER CHALLENGED AND NOT BY SALMONELLA HEIDELBERG

    Directory of Open Access Journals (Sweden)

    PFG Previato do Amaral

    Full Text Available ABSTRACT Salmonellosis is a globally important zoonosis, and Salmonella Heidelberg is one of the most prevalent serovars in poultry production worldwide, as well as in food poisoning cases. Antimicrobial drugs were previously widely used to face health challenges in animal production; however, since their ban as performance enhancers, many alternative strategies have been proposed. One of these strategies is the use of plant extracts, such as those containing the alkaloids benzophenanthridine and protopine. These compounds have antimicrobial, anti-inflammatory, immunomodulation, and nutritional effects. The objective of the present study was to evaluate the effects of the supply of a product containing benzophenanthridine and protopine (Sangrovit(rWS 100 g/1000 L of drinking water to broilers during different rearing periods 1-21, 1-6 and 6-21 days of age challenged or not with Salmonella Heidelberg at six days of age. There was no effect of the product on the performance, jejunal morphometry, cecal goblet cell counts, or control of Salmonella spp. in broilers challenged or not with Salmonella Heidelberg. However, the group receiving the alkaloids from 1 to 21 days of age, compared with the control group, presented a numerical difference of 28 points in productive efficiency index, which directly impacts live production cost of live broiler, representing savings of R$ 0.11/kg of meat produced.

  17. An approach to model reactor core nodalization for deterministic safety analysis

    Energy Technology Data Exchange (ETDEWEB)

    Salim, Mohd Faiz, E-mail: mohdfaizs@tnb.com.my; Samsudin, Mohd Rafie, E-mail: rafies@tnb.com.my [Nuclear Energy Department, Regulatory Economics & Planning Division, Tenaga Nasional Berhad (Malaysia); Mamat Ibrahim, Mohd Rizal, E-mail: m-rizal@nuclearmalaysia.gov.my [Prototypes & Plant Development Center, Malaysian Nuclear Agency (Malaysia); Roslan, Ridha, E-mail: ridha@aelb.gov.my; Sadri, Abd Aziz [Nuclear Installation Divisions, Atomic Energy Licensing Board (Malaysia); Farid, Mohd Fairus Abd [Reactor Technology Center, Malaysian Nuclear Agency (Malaysia)

    2016-01-22

    Adopting good nodalization strategy is essential to produce an accurate and high quality input model for Deterministic Safety Analysis (DSA) using System Thermal-Hydraulic (SYS-TH) computer code. The purpose of such analysis is to demonstrate the compliance against regulatory requirements and to verify the behavior of the reactor during normal and accident conditions as it was originally designed. Numerous studies in the past have been devoted to the development of the nodalization strategy for small research reactor (e.g. 250kW) up to the bigger research reactor (e.g. 30MW). As such, this paper aims to discuss the state-of-arts thermal hydraulics channel to be employed in the nodalization for RTP-TRIGA Research Reactor specifically for the reactor core. At present, the required thermal-hydraulic parameters for reactor core, such as core geometrical data (length, coolant flow area, hydraulic diameters, and axial power profile) and material properties (including the UZrH{sub 1.6}, stainless steel clad, graphite reflector) have been collected, analyzed and consolidated in the Reference Database of RTP using standardized methodology, mainly derived from the available technical documentations. Based on the available information in the database, assumptions made on the nodalization approach and calculations performed will be discussed and presented. The development and identification of the thermal hydraulics channel for the reactor core will be implemented during the SYS-TH calculation using RELAP5-3D{sup ®} computer code. This activity presented in this paper is part of the development of overall nodalization description for RTP-TRIGA Research Reactor under the IAEA Norwegian Extra-Budgetary Programme (NOKEBP) mentoring project on Expertise Development through the Analysis of Reactor Thermal-Hydraulics for Malaysia, denoted as EARTH-M.

  18. Characterization of a Neutron Beam Following Reconfiguration of the Neutron Radiography Reactor (NRAD) Core and Addition of New Fuel Elements

    OpenAIRE

    Aaron E. Craft; Bruce A. Hilton; Glen C. Papaioannou

    2016-01-01

    The neutron radiography reactor (NRAD) is a 250 kW Mark-II Training, Research, Isotopes, General Atomics (TRIGA) reactor at Idaho National Laboratory, Idaho Falls, ID, USA. The East Radiography Station (ERS) is one of two neutron beams at the NRAD used for neutron radiography, which sits beneath a large hot cell and is primarily used for neutron radiography of highly radioactive objects. Additional fuel elements were added to the NRAD core in 2013 to increase the excess reactivity of the reac...

  19. Development of a system based in a digital signal processor (DSP) for a simulator of power regulation in a reactor: first stage; Desarrollo de un sistema basado en un DSP para un simulador de regulacion de potencia en un reactor: 1. etapa

    Energy Technology Data Exchange (ETDEWEB)

    Benitez R, J.S.; Perez C, B. [Instituto Nacional de Investigaciones Nucleares, Km. 36.5 Carretera Mexico-Toluca, Municipio de Ocoyoacac, 52045 Estado de Mexico (Mexico)

    2002-07-01

    The first stage of the development of a digital system based on a DSP is presented which forms part of an hybrid simulator for the power regulation in am model of the punctual kinetics of a TRIGA reactor type. The DSP performs the regulation, using a Mandami type algorithm of diffuse control. In the algorithm, the universe of the output variable is discretized for performing in an unique stage the aggregation functions and dis-diffusization. (Author)

  20. Reactor Physics

    Energy Technology Data Exchange (ETDEWEB)

    Ait Abderrahim, A

    2001-04-01

    The Reactor Physics and MYRRHA Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis of reactor fuel. This expertise is applied in the Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments by means of neutron and gamma calculations. The activities of the Fuzzy Logic and Intelligent Technologies in Nuclear Science programme cover several domains outside the department. Progress and achievements in these topical areas in 2000 are summarised.

  1. Heidelberg Ion Therapy Center (HIT): Initial clinical experience in the first 80 patients

    Energy Technology Data Exchange (ETDEWEB)

    Combs, Stephanie E. (Univ. Hospital of Heidelberg, Dept. of Radiation Oncology, Heidelberg (Germany)), E-mail: Stephanie.Combs@med.uni-heidelberg.de; Ellerbrock, Malte; Haberer, Thomas (Heidelberger Ionenstrahl Therapiezentrum (HIT), Im Neuenheimer Feld 450, 69120 Heidelberg (Germany)) (and others)

    2010-10-15

    The Heidelberg Ion Therapy Center (HIT) started clinical operation in November 2009. In this report we present the first 80 patients treated with proton and carbon ion radiotherapy and describe patient selection, treatment planning and daily treatment for different indications. Patients and methods. Between November 15, 2009 and April 15, 2010, 80 patients were treated at the Heidelberg Ion Therapy Center (HIT) with carbon ion and proton radiotherapy. Main treated indications consisted of skull base chordoma (n = 9) and chondrosarcoma (n = 18), malignant salivary gland tumors (n=29), chordomas of the sacrum (n = 5), low grade glioma (n=3), primary and recurrent malignant astrocytoma and glioblastoma (n=7) and well as osteosarcoma (n = 3). Of these patients, four pediatric patients aged under 18 years were treated. Results. All patients were treated using the intensity-modulated rasterscanning technique. Seventy-six patients were treated with carbon ions (95%), and four patients were treated with protons. In all patients x-ray imaging was performed prior to each fraction. Treatment concepts were based on the initial experiences with carbon ion therapy at the Gesellschaft fuer Schwerionenforschung (GSI) including carbon-only treatments and carbon-boost treatments with photon-IMRT. The average time per fraction in the treatment room per patient was 29 minutes; for irradiation only, the mean time including all patients was 16 minutes. Position verification was performed prior to every treatment fraction with orthogonal x-ray imaging. Conclusion. Particle therapy could be included successfully into the clinical routine at the Dept. of Radiation Oncology in Heidelberg. Numerous clinical trials will subsequently be initiated to precisely define the role of proton and carbon ion radiotherapy in radiation oncology.

  2. Extended-Spectrum Cephalosporin-Resistant Salmonella enterica serovar Heidelberg Strains, the Netherlands1

    Science.gov (United States)

    Geurts, Yvon; Dierikx, Cindy M.; Brouwer, Michael S.M.; Kant, Arie; Wit, Ben; Heymans, Raymond; van Pelt, Wilfrid; Mevius, Dik J.

    2016-01-01

    Extended-spectrum cephalosporin-resistant Salmonella enterica serovar Heidelberg strains (JF6X01.0022/XbaI.0251, JF6X01.0326/XbaI.1966, JF6X01.0258/XbaI.1968, and JF6X01.0045/XbaI.1970) have been identified in the United States with pulsed-field gel electrophoresis. Our examination of isolates showed introduction of these strains in the Netherlands and highlight the need for active surveillance and intervention strategies by public health organizations. PMID:27314180

  3. Reactor safeguards

    CERN Document Server

    Russell, Charles R

    1962-01-01

    Reactor Safeguards provides information for all who are interested in the subject of reactor safeguards. Much of the material is descriptive although some sections are written for the engineer or physicist directly concerned with hazards analysis or site selection problems. The book opens with an introductory chapter on radiation hazards, the construction of nuclear reactors, safety issues, and the operation of nuclear reactors. This is followed by separate chapters that discuss radioactive materials, reactor kinetics, control and safety systems, containment, safety features for water reactor

  4. Reactor operation

    CERN Document Server

    Shaw, J

    2013-01-01

    Reactor Operation covers the theoretical aspects and design information of nuclear reactors. This book is composed of nine chapters that also consider their control, calibration, and experimentation.The opening chapters present the general problems of reactor operation and the principles of reactor control and operation. The succeeding chapters deal with the instrumentation, start-up, pre-commissioning, and physical experiments of nuclear reactors. The remaining chapters are devoted to the control rod calibrations and temperature coefficient measurements in the reactor. These chapters also exp

  5. Heidelberg standard examination” and “Heidelberg standard procedures” – Development of faculty-wide standards for physical examination techniques and clinical procedures in undergraduate medical education

    Directory of Open Access Journals (Sweden)

    Nikendei, C.

    2016-08-01

    Full Text Available The competent physical examination of patients and the safe and professional implementation of clinical procedures constitute essential components of medical practice in nearly all areas of medicine. The central objective of the projects “Heidelberg standard examination” and “Heidelberg standard procedures”, which were initiated by students, was to establish uniform interdisciplinary standards for physical examination and clinical procedures, and to distribute them in coordination with all clinical disciplines at the Heidelberg University Hospital. The presented project report illuminates the background of the initiative and its methodological implementation. Moreover, it describes the multimedia documentation in the form of pocketbooks and a multimedia internet-based platform, as well as the integration into the curriculum. The project presentation aims to provide orientation and action guidelines to facilitate similar processes in other faculties.

  6. Heidelberg standard examination” and “Heidelberg standard procedures” – Development of faculty-wide standards for physical examination techniques and clinical procedures in undergraduate medical education

    Science.gov (United States)

    Nikendei, C.; Ganschow, P.; Groener, J. B.; Huwendiek, S.; Köchel, A.; Köhl-Hackert, N.; Pjontek, R.; Rodrian, J.; Scheibe, F.; Stadler, A.-K.; Steiner, T.; Stiepak, J.; Tabatabai, J.; Utz, A.; Kadmon, M.

    2016-01-01

    The competent physical examination of patients and the safe and professional implementation of clinical procedures constitute essential components of medical practice in nearly all areas of medicine. The central objective of the projects “Heidelberg standard examination” and “Heidelberg standard procedures”, which were initiated by students, was to establish uniform interdisciplinary standards for physical examination and clinical procedures, and to distribute them in coordination with all clinical disciplines at the Heidelberg University Hospital. The presented project report illuminates the background of the initiative and its methodological implementation. Moreover, it describes the multimedia documentation in the form of pocketbooks and a multimedia internet-based platform, as well as the integration into the curriculum. The project presentation aims to provide orientation and action guidelines to facilitate similar processes in other faculties. PMID:27579354

  7. Interactive Virtual Reactor and Control Room for Education and Training at Universities and Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Satoh, Yoshinori; Li, Ye; Zhu, Xuefeng; Rizwan, Uddin [University of Illinois, Urbana (United States)

    2014-08-15

    Efficient and effective education and training of nuclear engineering students and nuclear workers are critical for the safe operation and maintenance of nuclear power plants. With an eye toward this need, we have focused on the development of 3D models of virtual labs for education, training as well as to conduct virtual experiments. These virtual labs, that are expected to supplement currently available resources, and have the potential to reduce the cost of education and training, are most easily developed on game-engine platforms. We report some recent extensions to the virtual model of the University of Illinois TRIGA reactor.

  8. Research Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Martens, Frederick H. [Argonne National Laboratory; Jacobson, Norman H.

    1968-09-01

    This booklet discusses research reactors - reactors designed to provide a source of neutrons and/or gamma radiation for research, or to aid in the investigation of the effects of radiation on any type of material.

  9. Technical and dosimetric aspects of the total skin electron beam technique implemented at Heidelberg University Hospital.

    Science.gov (United States)

    Hensley, Frank W; Major, Gerald; Edel, Carolin; Hauswald, Henrik; Bischof, Marc

    2014-03-01

    To give a technical description and present the dosimetric proporties of the total skin electron beam technique implemented at Heidelberg University Hospital. Techniques used for total skin electron beam irradiation were developed as early as in the 1960s to 1980s and have, since then, hardly changed. However, new measurements of the established methods allow deeper insight into the dose distributions and reasons for possible deviations from uniform dose. The TSEI technique applied at Heidelberg University Hospital since 1992 consists of irradiating the patient with a superposition of two beams of low energy electrons at gantry angles of 72° and 108° while he is rotating in a standing position on a turntable at 370 cm distance from the accelerator. The energy of the electron beam is degraded to 3.9 MeV by passing through an attenuator of 6 mm of Perspex. A recent re-measurement of the dose distribution is presented using modern dosimetry tools like a linear array of ionization chambers in combination with established methods like thermoluminescent detectors and film dosimetry. The measurements show a strong dependence of dose uniformity on details of the setup like gantry angles. Dose uniformity of -4/+8% to the majority of the patient's skin can be achieved, however, for the described rotational technique overdoses up to more than 20% in small regions seem unavoidable.

  10. Dimensions of the foveal avascular zone using the Heidelberg retinal angiogram-2 in normal eyes

    Directory of Open Access Journals (Sweden)

    John Deepa

    2011-01-01

    Full Text Available Purpose: The purpose was to study the dimensions of the foveal avascular zone (FAZ using Heidelberg Retinal Angiogram-2 (HRA-2; Heidelberg Engineering GmBH, Dossenheim, Germany. Materials and Methods: An observational study of the FAZ area and circumference was done with fundus fluorescein angiography (FFA using HRA-2 in 31 normal individuals. The FAZ was studied using both contrast-adjusted and nonadjusted methods. Contrast adjustment was done to obtain better visualization of the finer capillaries around the fovea enabling more precise measurements of the FAZ in normal eyes. Results: The mean area of the FAZ calculated by the contrast-adjusted method was 0.2753 mm 2 (±0.074 and the mean circumference was 2.22 mm (±0.048. By the conventional method, the area and circumference of the FAZ were 0.6241 mm 2 (±0.177 and 3.23 mm (±0.454, respectively. Conclusion: The measurements of area and circumference of FAZ using contrast-adjusted methods were significantly smaller than the conventional method.

  11. Novel surveillance of Salmonella enterica serotype Heidelberg epidemics in a closed community.

    Science.gov (United States)

    Vincent, Virginia; Scott, H Morgan; Harvey, Roger B; Alali, Walid Q; Hume, Michael E

    2007-01-01

    Pathogen and disease surveillance and control represent important public health priorities in high-density and high-risk populations such as nursing homes, cruise ships, military bases, hospitals, and prisons. Reportable disease investigations, along with syndromic surveillance, have been used to identify and characterize outbreaks in their early stages. In this study, we provide evidence that ongoing wastewater monitoring could be used to supplement these traditional methods in at-risk closed communities. During 2003-2005, a systematic and regularly timed human and farm-animal wastewater sampling scheme existed in several geographically distinct locations of a multisite population in Texas. In early July 2003, an outbreak of gastroenteritis caused by Salmonella enterica serotype Heidelberg occurred in the human population at one site. Wastewater samples from the weeks before, during, and after the outbreak were tested for the pathogen. Selective culture, serogrouping, and serotyping techniques as well as real-time polymerase chain reaction and pulsed field gel electrophoresis were used to detect and characterize the Salmonella Heidelberg in each sample. The ability to detect the causative pathogen of an outbreak while it circulates in the host populations prior to and after an outbreak, as well as during the outbreak peak, suggests that wastewater could be used as a supplemental disease surveillance tool. To further explore this possibility, two subsequent outbreaks of uncharacterized gastroenteritis in additional locations were also investigated using wastewater samples.

  12. Sports activities before and after medial unicompartmental knee arthroplasty using the new Heidelberg Sports Activity Score.

    Science.gov (United States)

    Jahnke, Alexander; Mende, Johannes Karl; Maier, Gerrit Steffen; Ahmed, Gafar Adam; Ishaque, Bernd Alexander; Schmitt, Holger; Rickert, Markus; Clarius, Michael; Seeger, Jörn Bengt

    2015-03-01

    The purpose of our study was to investigate the change of sports activities before and after medial unicompartmental knee arthroplasty (UKA) with the use of the Heidelberg Sports Activity Score (HAS). The Heidelberg Sports Activity Score (HAS) as well as FFb-H-OA, Oxford-12-Score, Tegner, UCLA and ACS were carried out to assess sports activities in 157 patients with medial osteoarthritis of the knee joint before and after UKA. The newly developed HAS also records the important duration and the sporting activity. Patients practiced sports in a more deliberate manner after UKA. Hiking, cycling and swimming were the sports most increased after surgery. Patients ≤65 years of age were sportier than those >65 years. Men were sportier than women, but all became sportier postoperatively. Patients with a high body mass index (BMI) are less sporty at first, but then increase their sports activity after surgery. HAS is an effective and valid assessment scale for evaluating sports activities before and after knee replacement.

  13. A carbon-cluster laser ion source for TRIGA-TRAP

    Science.gov (United States)

    Smorra, C.; Blaum, K.; Eberhardt, K.; Eibach, M.; Ketelaer, J.; Ketter, J.; Knuth, K.; Nagy, Sz

    2009-08-01

    A new laser ablation ion source was developed and tested for the Penning trap mass spectrometer TRIGA-TRAP in order to provide carbon-cluster ions for absolute mass calibration. Ions of different cluster sizes up to C+24 were successfully produced, covering the mass range up to the heavy actinide elements. The ions were captured in a Penning trap, and their time-of-flight cyclotron resonances recorded in order to determine their cyclotron frequency. Furthermore, the same ion source was used to produce GdO+ ions from a gadolinium target in sufficient amount for mass spectrometry purposes. The design of the source and its characteristics are presented. This paper comprises partly the PhD theses of J Ketelaer and C Smorra.

  14. Accuracy studies with carbon clusters at the Penning trap mass spectrometer TRIGA-TRAP

    Science.gov (United States)

    Ketelaer, J.; Beyer, T.; Blaum, K.; Block, M.; Eberhardt, K.; Eibach, M.; Herfurth, F.; Smorra, C.; Nagy, Sz.

    2010-05-01

    Extensive cross-reference measurements of well-known frequency ratios using various sizes of carbon cluster ions 12Cn + (10≤n≤23) were performed to determine the effects limiting the accuracy of mass measurements at the Penning-trap facility TRIGA-TRAP. Two major contributions to the uncertainty of a mass measurement have been identified. Fluctuations of the magnetic field cause an uncertainty in the frequency ratio due to the required calibration by a reference ion of uf(νref)/νref = 6(2) × 10-11/min × Δt. A mass-dependent systematic shift of the frequency ratio of epsilonm(r)/r = -2.2(2) × 10-9 × (m-mref)/u has been found as well. Finally, the nuclide 197Au was used as a cross-check since its mass is already known with an uncertainty of 0.6 keV.

  15. Recent developments in ion detection techniques for Penning trap mass spectrometry at TRIGA-TRAP

    Science.gov (United States)

    Ketelaer, J.; Blaum, K.; Block, M.; Eberhardt, K.; Eibach, M.; Ferrer, R.; George, S.; Herfurth, F.; Ketter, J.; Nagy, Sz.; Repp, J.; Schweikhard, L.; Smorra, C.; Sturm, S.; Ulmer, S.

    2009-12-01

    The highest precision in the determination of nuclear and atomic masses can be achieved by Penning trap mass spectrometry. The mass value is obtained through a measurement of the cyclotron frequency of the stored charged particle. Two different approaches are used at the Penning trap mass spectrometer TRIGA-TRAP for the mass determination: the destructive Time-Of-Flight Ion Cyclotron Resonance (TOF-ICR) technique and the non-destructive Fourier Transform Ion Cyclotron Resonance (FT-ICR) method. New developments for both techniques are described, which will improve the detection efficiency and the suppression of contaminations in the case of TOF-ICR. The FT-ICR detection systems will allow for the investigation of an incoming ion bunch from a radioactive-beam facility on the one hand, and for the detection of a single singly charged ion in the Penning trap on the other hand.

  16. Operational Transition from the First-Generation Heidelberg Spectralis Optical Coherence Tomography [OCT("OCT1")] to the Second-Generation Heidelberg Spectralis OCT("OCT2")

    Science.gov (United States)

    Mason, S.; Brunstetter, T.; Young, M.; Van Baalen, M.; Tarver, W.; Derrick, R.; Wells, J.; Dey, B.; Todd, K.; Smith, B.; hide

    2018-01-01

    The Heidelberg Spectralis "OCT2", which recently became commercially available, is going to be implemented at the Johnson Space Center Flight Medicine Clinic and on board the International Space Station. Due to the increased scan rate of the "OCT2", this upgrade will allow for significant reduction in valuable crew testing time and also allow for additional capabilities, like OCT Angiography and Multi-Color Fundus Imaging. Due to the custom scans used to monitor Space Flight-Associated Neuro-ocular Syndrome (SANS) in our crewmembers, an evaluation to assess the impacts of transitioning from "OCT1" to "OCT2" was performed. An engineering assessment (N=1) was performed to identify any potential impacts of maintaining an "OCT1" on board ISS while implementing an "OCT2" in the JSC Clinic. "OCT2" implementation will lag JSC FMC clinical implementation due to the flight certification/manifestation process. The clinical assessment was performed (n=12) to identify any impacts due to the replacement of the "OCT1" with the "OCT2" to the longitudinal OCT data across a crewmember's mission/lifetime. The qualitative results from the engineering and clinical evaluation will be reported, as well as the quantitative assessment of the clinical variables

  17. Calculation of neutron activation of control rods of a nuclear reactor, using MCNP5; Calculo de activacion neutronica de barras de control de un reactor nuclear, utilizando MCNP5

    Energy Technology Data Exchange (ETDEWEB)

    Pena V, J.D.

    2016-07-01

    The control rods of a nuclear reactor are activated by neutron irradiation. The generated activity produces a dose around the rod which is irrelevant inside the reactor, but significant when the rod is withdrawn and placed in a storage pool, because this dose is a potential risk to the surrounding personnel. On the other hand, most of the activation occurs in the stainless steel components of the rod. The Monte Carlo model can reliably determine the activation produced in a stainless steel part exposed to a neutron flux in a reactor and the dose measurement around this part. This thesis presents the Monte Carlo models developed for the activation of the control rods of the TRIGA Mark III reactor of Instituto Nacional de Investigaciones Nucleares (ININ) when only standard fuel was available. Therefore, the validations of the Monte Carlo models are reliable. (Author)

  18. Studies of fragileness in steels of vessels of BWR reactors; Estudios de fragilizacion en aceros de vasija de reactores BWR

    Energy Technology Data Exchange (ETDEWEB)

    Robles, E.F.; Balcazar, M.; Alpizar, A.M.; Calderon, B.E. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2003-07-01

    The structural materials with those that are manufactured the pressure vessels of the BWR reactors, suffer degradation in its mechanical properties mainly to the damage taken place by the fast neutrons (E > 1 MeV) coming from the reactor core. Its are experimentally studied those mechanisms of neutron damage in this material type, by means of the irradiation of steel vessel in experimental reactors to age them quickly. Alternatively it is simulated the neutron damage by means of irradiation of steel with heavy ions. In this work those are shown first results of the damage induced by irradiation from a similar steel to the vessel of a BWR reactor. The irradiation was carried out with fast neutrons (E > 1 MeV, fluence of 1.45 x 10{sup 18} n/cm{sup 2}) in the TRIGA MARK lll reactor and separately with Ni{sup +3} ions in a Tandetrom accelerator, E = 4.8 MeV and range of the ionic flow of 0.1 to 53 iones/A{sup 2}. (Author)

  19. CONVECTION REACTOR

    Science.gov (United States)

    Hammond, R.P.; King, L.D.P.

    1960-03-22

    An homogeneous nuclear power reactor utilizing convection circulation of the liquid fuel is proposed. The reactor has an internal heat exchanger looated in the same pressure vessel as the critical assembly, thereby eliminating necessity for handling the hot liquid fuel outside the reactor pressure vessel during normal operation. The liquid fuel used in this reactor eliminates the necessity for extensive radiolytic gas rocombination apparatus, and the reactor is resiliently pressurized and, without any movable mechanical apparatus, automatically regulates itself to the condition of criticality during moderate variations in temperature snd pressure and shuts itself down as the pressure exceeds a predetermined safe operating value.

  20. Characterization of a multidrug-resistant Salmonella enterica serovar Heidelberg outbreak strain in commercial turkeys: colonization, transmission, and host transcriptional response

    Science.gov (United States)

    In recent years, multidrug-resistant (MDR) Salmonella enterica serovar Heidelberg has been associated with numerous human foodborne illness outbreaks due to consumption of poultry. For example, in 2011, an MDR S. Heidelberg outbreak associated with ground turkey sickened 136 individuals and resulted...

  1. National Outbreak of Multidrug Resistant Salmonella Heidelberg Infections Linked to a Single Poultry Company.

    Directory of Open Access Journals (Sweden)

    Laura Gieraltowski

    Full Text Available This large outbreak of foodborne salmonellosis demonstrated the complexity of investigating outbreaks linked to poultry products. The outbreak also highlighted the importance of efforts to strengthen food safety policies related to Salmonella in chicken parts and has implications for future changes within the poultry industry.To investigate a large multistate outbreak of multidrug resistant Salmonella Heidelberg infections.Epidemiologic and laboratory investigations of patients infected with the outbreak strains of Salmonella Heidelberg and traceback of possible food exposures.United States. Outbreak period was March 1, 2013 through July 11, 2014.A case was defined as illness in a person infected with a laboratory-confirmed Salmonella Heidelberg with 1 of 7 outbreak pulsed-field gel electrophoresis (PFGE XbaI patterns with illness onset from March 1, 2013 through July 11, 2014. A total of 634 case-patients were identified through passive surveillance; 200/528 (38% were hospitalized, none died.Interviews were conducted with 435 case-patients: 371 (85% reported eating any chicken in the 7 days before becoming ill. Of 273 case-patients interviewed with a focused questionnaire, 201 (74% reported eating chicken prepared at home. Among case-patients with available brand information, 152 (87% of 175 patients reported consuming Company A brand chicken. Antimicrobial susceptibility testing was completed on 69 clinical isolates collected from case-patients; 67% were drug resistant, including 24 isolates (35% that were multidrug resistant. The source of Company A brand chicken consumed by case-patients was traced back to 3 California production establishments from which 6 of 7 outbreak strains were isolated.Epidemiologic, laboratory, traceback, and environmental investigations conducted by local, state, and federal public health and regulatory officials indicated that consumption of Company A chicken was the cause of this outbreak. The outbreak involved

  2. National Outbreak of Multidrug Resistant Salmonella Heidelberg Infections Linked to a Single Poultry Company.

    Science.gov (United States)

    Gieraltowski, Laura; Higa, Jeffrey; Peralta, Vi; Green, Alice; Schwensohn, Colin; Rosen, Hilary; Libby, Tanya; Kissler, Bonnie; Marsden-Haug, Nicola; Booth, Hillary; Kimura, Akiko; Grass, Julian; Bicknese, Amelia; Tolar, Beth; Defibaugh-Chávez, Stephanie; Williams, Ian; Wise, Matthew

    2016-01-01

    This large outbreak of foodborne salmonellosis demonstrated the complexity of investigating outbreaks linked to poultry products. The outbreak also highlighted the importance of efforts to strengthen food safety policies related to Salmonella in chicken parts and has implications for future changes within the poultry industry. To investigate a large multistate outbreak of multidrug resistant Salmonella Heidelberg infections. Epidemiologic and laboratory investigations of patients infected with the outbreak strains of Salmonella Heidelberg and traceback of possible food exposures. United States. Outbreak period was March 1, 2013 through July 11, 2014. A case was defined as illness in a person infected with a laboratory-confirmed Salmonella Heidelberg with 1 of 7 outbreak pulsed-field gel electrophoresis (PFGE) XbaI patterns with illness onset from March 1, 2013 through July 11, 2014. A total of 634 case-patients were identified through passive surveillance; 200/528 (38%) were hospitalized, none died. Interviews were conducted with 435 case-patients: 371 (85%) reported eating any chicken in the 7 days before becoming ill. Of 273 case-patients interviewed with a focused questionnaire, 201 (74%) reported eating chicken prepared at home. Among case-patients with available brand information, 152 (87%) of 175 patients reported consuming Company A brand chicken. Antimicrobial susceptibility testing was completed on 69 clinical isolates collected from case-patients; 67% were drug resistant, including 24 isolates (35%) that were multidrug resistant. The source of Company A brand chicken consumed by case-patients was traced back to 3 California production establishments from which 6 of 7 outbreak strains were isolated. Epidemiologic, laboratory, traceback, and environmental investigations conducted by local, state, and federal public health and regulatory officials indicated that consumption of Company A chicken was the cause of this outbreak. The outbreak involved multiple

  3. Experimental and MCNP5 based evaluation of neutron and gamma flux in the irradiation ports of the University of Utah research reactor

    Directory of Open Access Journals (Sweden)

    Noble Brooklyn

    2012-01-01

    Full Text Available Neutron and gamma flux environment of various irradiation ports in the University of Utah training, research, isotope production, general atomics reactor were experimentally assessed and fully modeled using the MCNP5 code. The experimental measurements were based on the cadmium ratio in the irradiation ports of the reactor, flux profiling using nickel wire, and gamma dose measurements using thermo luminescence dosimeter. Full 3-D MCNP5 reactor model was developed to obtain the neutron flux distributions of the entire reactor core and to compare it with the measured flux focusing at the irradiation ports. Integration of all these analysis provided the updated comprehensive neutron-gamma flux maps of the existing irradiation facilities of the University of Utah TRIGA reactor.

  4. Spiroergometric and telemetric investigations during the XXI International Stoke Mandeville Games 1972 in Heidelberg.

    Science.gov (United States)

    Hüllemann, K D; List, M; Matthes, D; Wiese, G; Zika, D

    1975-08-01

    Spiroergometric and telemetric investigations were carried out on 100 paralysed athletes during the XXI International Stoke Mandeville Games in Heidelberg, 1972. The technical and organisational difficulties in carrying out these measurements were engendered by the disabilities of subjects. The maximum oxygen uptake observed and the oxygen pulse were lower than in non-disabled persons. There were no differences in the peak heart rates (180-200 beats/min.) as compared with non-disabled athletes during particular competition situations. Sports characterised by quickness, dexterity and strength are not able to train the cardiopulomnary system substantially. Swimming is recommended as beneficial. Psychological and training physiological considerations suggest that long-distance wheelchair races should be adopted as a Stoke Mandeville event.

  5. International outbreak investigation of Salmonella Heidelberg associated with in-flight catering.

    Science.gov (United States)

    Rebolledo, J; Garvey, P; Ryan, A; O'Donnell, J; Cormican, M; Jackson, S; Cloak, F; Cullen, L; Swaan, C M; Schimmer, B; Appels, R W; Nygard, K; Finley, R; Sreenivasan, N; Lenglet, A; Gossner, C; McKeown, P

    2014-04-01

    Rapid and wide dispersal of passengers after flights makes investigation of flight-related outbreaks challenging. An outbreak of Salmonella Heidelberg was identified in a group of Irish travellers returning from Tanzania. Additional international cases sharing the same flight were identified. Our aim was to determine the source and potential vehicles of infection. Case-finding utilized information exchange using experts' communication networks and national surveillance systems. Demographic, clinical and food history information was collected. Twenty-five additional cases were identified from Ireland, The Netherlands, Norway, USA and Canada. We conducted a case-control study which indicated a significant association between illness and consumption of milk tart (OR 10.2) and an egg dish (OR 6) served on-board the flight. No food consumed before the flight was associated with illness. Cases from countries other than Ireland provided supplementary information that facilitated the identification of likely vehicles of infection. Timely, committed international collaboration is vital in such investigations.

  6. Commissioning of the Cryogenic Plant for the Cryogenic Storage Ring (CSR) at Heidelberg

    CERN Document Server

    von Hahn, R; Grieser, M; Haberstroh, C; Kaiser, D; Lange, M; Laux, F; Menk, S; Orlov, D A; Repnow, R; Sieber, T; Quack, H; Varju, J; Wolf A

    2009-01-01

    At the Max-Planck-Institute for Nuclear Physics in Heidelberg a next generation electrostatic storage ring for low velocity atomic and molecular ion beams is under construction. In contrast to existing electrostatic storage rings, the Cryogenic Storage Ring CSR will be cooled down to temperatures below 2 K. Thus acting as a large cryopump it will provide long storage times and, in addition, open a new field of quantum state controlled molecular physics due to a low heat radiation background from space-like environment. A concept for cooling the storage ring has been developed and is presently tested by means of a linear trap as a prototype with a length of 1/10 of the planned ring. A commercial refrigerator with 21 W at 2 K has been successfully commissioned and was connected to the prototype. This paper presents the status of the cryogenic plant after the commissioning and one year of operation.

  7. The Heidelberg High Current Injector A Versatile Injector for Storage Ring Experiments

    CERN Document Server

    Von Hahn, R; Repnow, R; Schwalm, D; Welsch, C P

    2004-01-01

    The High Current Injector (HCI) was designed and built as a dedicated injector for the Test Storage Ring in Heidelberg to deliver mainly singly charged Li- and Be-ions. After start for routine operation in 1999 the HCI delivered stable beams during the following years for about 50 % of the experiments with very high reliability. Due to the requirements from the experiment the HCI changed during that period from a machine for singly charged positive ions to an injector for a large variety of molecules as well as positively or negatively charged light ions. After successful commissioning of the custom built 18 GHz high power ECR-source at its present test location various modifications and additions were made in preparation of a possible conversion into an injector for highly charged heavy ions as a second phase. This paper gives an overview of the experience gained in the passed 5 years and presents the status of the upgrade of the HCI.

  8. International outbreak investigation of Salmonella Heidelberg associated with in-flight catering.

    LENUS (Irish Health Repository)

    Rebolledo, J

    2013-07-26

    SUMMARY Rapid and wide dispersal of passengers after flights makes investigation of flight-related outbreaks challenging. An outbreak of Salmonella Heidelberg was identified in a group of Irish travellers returning from Tanzania. Additional international cases sharing the same flight were identified. Our aim was to determine the source and potential vehicles of infection. Case-finding utilized information exchange using experts\\' communication networks and national surveillance systems. Demographic, clinical and food history information was collected. Twenty-five additional cases were identified from Ireland, The Netherlands, Norway, USA and Canada. We conducted a case-control study which indicated a significant association between illness and consumption of milk tart (OR 10·2) and an egg dish (OR 6) served on-board the flight. No food consumed before the flight was associated with illness. Cases from countries other than Ireland provided supplementary information that facilitated the identification of likely vehicles of infection. Timely, committed international collaboration is vital in such investigations.

  9. [From stand-alone solution to longitudinal communication curriculum--development and implementation at the Faculty of Medicine in Heidelberg].

    Science.gov (United States)

    Sator, Marlene; Jünger, Jana

    2015-05-01

    At the Faculty of Medicine in Heidelberg, implementation of an interdisciplinary longitudinal curriculum was started in 2001 with the goal of achieving sustained promotion of communicative and clinical competences. The aim of this paper is to describe the development and implementation of Heidelberg's longitudinal communication curriculum. Furthermore, innovative aspects and strategies are discussed. The methodological approaches for development and implementation were Kern's "Six-step Approach" and a SWOT analysis. The process resulted in an innovative communication curriculum that starts with an integrated curriculum for developing clinical and communicative competence in the pre-clinical phase and continues in the clinical phase with medical communication and interactive training. Satisfaction with the communication curriculum and its effectiveness were rated highly by students. Residents who had graduated from Faculty of Medicine in Heidelberg rated the extent to which they had communicative competencies at the time of their graduation at their disposal significantly higher than residents who had graduated from the other 4 medical faculties in Baden-Württemberg. The experiences gained in Heidelberg can be applied by other faculties. © Georg Thieme Verlag KG Stuttgart · New York.

  10. Cortical reorganization in recent-onset tinnitus patients by the Heidelberg Model of Music Therapy

    Directory of Open Access Journals (Sweden)

    Christoph Maria Krick

    2015-02-01

    Full Text Available Pathophysiology and treatment of tinnitus still are fields of intensive research. The neuroscientifically motivated Heidelberg Model of Music Therapy, previously developed by the German Center for Music Therapy Research, Heidelberg, Germany, was applied to explore its effects on individual distress and on brain structures. This therapy is a compact and fast application of nine consecutive 50-minutes sessions of individualized therapy implemented over one week. Clinical improvement and long-term effects over several years have previously been published. However the underlying neural basis of the therapy’s success has not yet been explored. In the current study, the therapy was applied to acute tinnitus patients (TG and healthy active controls (AC. Non-treated patients were also included as passive controls (PTC. As predicted, the therapeutic intervention led to a significant decrease of tinnitus-related distress in TG compared to PTC. Before and after the study week, high-resolution MRT scans were obtained for each subject. Assessment by repeated measures design for several groups (two-way ANOVA revealed structural gray matter (GM increase in TG compared to PTC, comprising clusters in precuneus, medial superior frontal areas, and in the auditory cortex. This pattern was further applied as mask for general GM changes as induced by the therapy week. The therapy-like procedure in AC also elicited similar GM increases in precuneus and frontal regions. Comparison between structural effects in TG versus AC was calculated within the mask for general GM changes to obtain specific effects in tinnitus patients, yielding GM increase in right Heschl's gyrus, right Rolandic operculum, and medial superior frontal regions. In line with recent findings on the crucial role of the auditory cortex in maintaining tinnitus-related distress, a causative relation between the therapy-related GM alterations in auditory areas and the long-lasting therapy effects can be

  11. Kompetenzorientierte Evaluation des adaptiven Schulungskonzepts TUBLIK der Universitätsbibliothek Heidelberg

    Directory of Open Access Journals (Sweden)

    Benno Homann

    2015-12-01

    Full Text Available Im Vergleich zu den Bibliotheken angloamerikanischer Länder verwenden deutsche Bibliotheken bisher kaum sozialwissenschaftliche Evaluationsmethoden, um den Nutzen von Veranstaltungskonzepten für die Steigerung von Informationskompetenz nachzuweisen und die Vermittlungsmethoden zu verbessern. Ansatzpunkte zur Beseitigung dieser Defizite bietet das an der Universitätsbibliothek Heidelberg durchgeführte Projekt TUBLIK (Tutoren- und Blended-Learning-basierte Vermittlung von Informationskompetenz, bei dem mehrere sozialwissenschaftliche Verfahren eingesetzt wurden. Mit den angewandten Methoden konnten eine Steigerung der Informationskompetenz bei Studierenden durch TUBLIK nachgewiesen und Vorschläge zur methodischen Optimierung des Konzepts erarbeitet werden. Deutlich wurde auch, dass eine systematische Weiterentwicklung von Evaluationsmethoden zur Messung von Informationskompetenz und der Aufbau von sozialwissenschaftlichen Methodenkompetenzen an Bibliotheken erforderlich sind. Compared to libraries in Anglo-American countries, sociological evaluation methods are only rarely used by German libraries in order to measure the impact of training concepts on information literacy and to improve the teaching methods. The project TUBLIK (Tutoren- und Blended-Learning-basierte Vermittlung von Informationskompetenz at the University Library of Heidelberg, which makes use of several social science methods, offers a starting point for addressing these deficiencies. With the methods applied, it was shown that students’ information literacy competencies have increased due to TUBLIK and it was possible to develop methodological proposals for optimizing the concept. It also became evident that it is necessary to systematically develop evaluation methods for measuring information literacy and to build up expertise in social science methods at libraries.

  12. Cortical reorganization in recent-onset tinnitus patients by the Heidelberg Model of Music Therapy

    Science.gov (United States)

    Krick, Christoph M.; Grapp, Miriam; Daneshvar-Talebi, Jonas; Reith, Wolfgang; Plinkert, Peter K.; Bolay, Hans Volker

    2015-01-01

    Pathophysiology and treatment of tinnitus still are fields of intensive research. The neuroscientifically motivated Heidelberg Model of Music Therapy, previously developed by the German Center for Music Therapy Research, Heidelberg, Germany, was applied to explore its effects on individual distress and on brain structures. This therapy is a compact and fast application of nine consecutive 50-min sessions of individualized therapy implemented over 1 week. Clinical improvement and long-term effects over several years have previously been published. However, the underlying neural basis of the therapy's success has not yet been explored. In the current study, the therapy was applied to acute tinnitus patients (TG) and healthy active controls (AC). Non-treated patients were also included as passive controls (PTC). As predicted, the therapeutic intervention led to a significant decrease of tinnitus-related distress in TG compared to PTC. Before and after the study week, high-resolution MRT scans were obtained for each subject. Assessment by repeated measures design for several groups (Two-Way ANOVA) revealed structural gray matter (GM) increase in TG compared to PTC, comprising clusters in precuneus, medial superior frontal areas, and in the auditory cortex. This pattern was further applied as mask for general GM changes as induced by the therapy week. The therapy-like procedure in AC also elicited similar GM increases in precuneus and frontal regions. Comparison between structural effects in TG vs. AC was calculated within the mask for general GM changes to obtain specific effects in tinnitus patients, yielding GM increase in right Heschl's gyrus, right Rolandic operculum, and medial superior frontal regions. In line with recent findings on the crucial role of the auditory cortex in maintaining tinnitus-related distress, a causative relation between the therapy-related GM alterations in auditory areas and the long-lasting therapy effects can be assumed. PMID:25745385

  13. REACTOR COOLING

    Science.gov (United States)

    Quackenbush, C.F.

    1959-09-29

    A nuclear reactor with provisions for selectively cooling the fuel elements is described. The reactor has a plurality of tubes extending throughout. Cylindrical fuel elements are disposed within the tubes and the coolant flows through the tubes and around the fuel elements. The fuel elements within the central portion of the reactor are provided with roughened surfaces of material. The fuel elements in the end portions of the tubes within the reactor are provlded with low conduction jackets and the fuel elements in the region between the central portion and the end portions are provided with smooth surfaces of high heat conduction material.

  14. Comparative genomic analysis and virulence differences in closely related salmonella enterica serotype heidelberg isolates from humans, retail meats, and animals.

    Science.gov (United States)

    Hoffmann, Maria; Zhao, Shaohua; Pettengill, James; Luo, Yan; Monday, Steven R; Abbott, Jason; Ayers, Sherry L; Cinar, Hediye N; Muruvanda, Tim; Li, Cong; Allard, Marc W; Whichard, Jean; Meng, Jianghong; Brown, Eric W; McDermott, Patrick F

    2014-05-01

    Salmonella enterica subsp. enterica serovar Heidelberg (S. Heidelberg) is one of the top serovars causing human salmonellosis. Recently, an antibiotic-resistant strain of this serovar was implicated in a large 2011 multistate outbreak resulting from consumption of contaminated ground turkey that involved 136 confirmed cases, with one death. In this study, we assessed the evolutionary diversity of 44 S. Heidelberg isolates using whole-genome sequencing (WGS) generated by the 454 GS FLX (Roche) platform. The isolates, including 30 with nearly indistinguishable (one band difference) Xbal pulsed-field gel electrophoresis patterns (JF6X01.0032, JF6X01.0058), were collected from various sources between 1982 and 2011 and included nine isolates associated with the 2011 outbreak. Additionally, we determined the complete sequence for the chromosome and three plasmids from a clinical isolate associated with the 2011 outbreak using the Pacific Biosciences (PacBio) system. Using single-nucleotide polymorphism (SNP) analyses, we were able to distinguish highly clonal isolates, including strains isolated at different times in the same year. The isolates from the recent 2011 outbreak clustered together with a mean SNP variation of only 17 SNPs. The S. Heidelberg isolates carried a variety of phages, such as prophage P22, P4, lambda-like prophage Gifsy-2, and the P2-like phage which carries the sopE1 gene, virulence genes including 62 pathogenicity, and 13 fimbrial markers and resistance plasmids of the incompatibility (Inc)I1, IncA/C, and IncHI2 groups. Twenty-one strains contained an IncX plasmid carrying a type IV secretion system. On the basis of the recent and historical isolates used in this study, our results demonstrated that, in addition to providing detailed genetic information for the isolates, WGS can identify SNP targets that can be utilized for differentiating highly clonal S. Heidelberg isolates.

  15. Multifunctional reactors

    NARCIS (Netherlands)

    Westerterp, K.R.

    1992-01-01

    Multifunctional reactors are single pieces of equipment in which, besides the reaction, other functions are carried out simultaneously. The other functions can be a heat, mass or momentum transfer operation and even another reaction. Multifunctional reactors are not new, but they have received much

  16. Monte Carlo Shielding Comparative Analysis Applied to TRIGA HEU and LEU Spent Fuel Transport

    Science.gov (United States)

    Margeanu, C. A.; Margeanu, S.; Barbos, D.; Iorgulis, C.

    2010-12-01

    The paper is a comparative study of LEU and HEU fuel utilization effects for the shielding analysis during spent fuel transport. A comparison against the measured data for HEU spent fuel, available from the last stage of spent fuel repatriation fulfilled in the summer of 2008, is also presented. All geometrical and material data for the shipping cask were considered according to NAC-LWT Cask approved model. The shielding analysis estimates radiation doses to shipping cask wall surface, and in air at 1 m and 2 m, respectively, from the cask, by means of 3D Monte Carlo MORSE-SGC code. Before loading into the shipping cask, TRIGA spent fuel source terms and spent fuel parameters have been obtained by means of ORIGEN-S code. Both codes are included in ORNL's SCALE 5 programs package. The actinides contribution to total fuel radioactivity is very low in HEU spent fuel case, becoming 10 times greater in LEU spent fuel case. Dose rates for both HEU and LEU fuel contents are below regulatory limits, LEU spent fuel photon dose rates being greater than HEU ones. Comparison between HEU spent fuel theoretical and measured dose rates in selected measuring points shows a good agreement, calculated values being greater than the measured ones both to cask wall surface (about 34% relative difference) and in air at 1 m distance from cask surface (about 15% relative difference).

  17. Fresh-Core Reload of the Neutron Radiography (NRAD) Reactor with Uranium(20)-Erbium-Zirconium-Hydride Fuel

    Energy Technology Data Exchange (ETDEWEB)

    John D. Bess; Thomas L. Maddock; Margaret A. Marshall; Leland M. Montierth

    2011-03-01

    The neutron radiography (NRAD) reactor is a 250 kW TRIGA® (Training, Research, Isotopes, General Atomics) Mark II , tank-type research reactor currently located in the basement, below the main hot cell, of the Hot Fuel Examination Facility (HFEF) at the Idaho National Laboratory (INL). It is equipped with two beam tubes with separate radiography stations for the performance of neutron radiography irradiation on small test components. The 60-fuel-element operational core configuration of the NRAD LEU TRIGA reactor has been evaluated as an acceptable benchmark experiment. The initial critical configuration developed during the fuel loading process, which contains only 56 fuel elements, has not been evaluated as it is very similar to the evaluated core configuration. The benchmark eigenvalue is 1.0012 ± 0.0029. Calculated eigenvalues differ significantly (~±1%) from the benchmark eigenvalue and have demonstrated sensitivity to the thermal scattering treatment of hydrogen in the U-Er-Zr-H fuel.

  18. A binary mixed integer coded genetic algorithm for multi-objective optimization of nuclear research reactor fuel reloading

    Energy Technology Data Exchange (ETDEWEB)

    Binh, Do Quang [University of Technical Education Ho Chi Minh City (Viet Nam); Huy, Ngo Quang [University of Industry Ho Chi Minh City (Viet Nam); Hai, Nguyen Hoang [Centre for Research and Development of Radiation Technology, Ho Chi Minh City (Viet Nam)

    2014-12-15

    This paper presents a new approach based on a binary mixed integer coded genetic algorithm in conjunction with the weighted sum method for multi-objective optimization of fuel loading patterns for nuclear research reactors. The proposed genetic algorithm works with two types of chromosomes: binary and integer chromosomes, and consists of two types of genetic operators: one working on binary chromosomes and the other working on integer chromosomes. The algorithm automatically searches for the most suitable weighting factors of the weighting function and the optimal fuel loading patterns in the search process. Illustrative calculations are implemented for a research reactor type TRIGA MARK II loaded with the Russian VVR-M2 fuels. Results show that the proposed genetic algorithm can successfully search for both the best weighting factors and a set of approximate optimal loading patterns that maximize the effective multiplication factor and minimize the power peaking factor while satisfying operational and safety constraints for the research reactor.

  19. Fresh-Core Reload of the Neutron Radiography (NRAD) Reactor with Uranium(20)-Erbium-Zirconium-Hydride Fuel

    Energy Technology Data Exchange (ETDEWEB)

    John D. Bess; Thomas L. Maddock; Margaret A. Marshall; Leland M. Montierth

    2013-03-01

    The neutron radiography (NRAD) reactor is a 250 kW TRIGA® (Training, Research, Isotopes, General Atomics) Mark II , tank-type research reactor currently located in the basement, below the main hot cell, of the Hot Fuel Examination Facility (HFEF) at the Idaho National Laboratory (INL). It is equipped with two beam tubes with separate radiography stations for the performance of neutron radiography irradiation on small test components. The initial critical configuration developed during the fuel loading process, which contains only 56 fuel elements, has been evaluated as an acceptable benchmark experiment. The 60-fuel-element operational core configuration of the NRAD LEU TRIGA reactor has also been evaluated as an acceptable benchmark experiment. Calculated eigenvalues differ significantly (~±1%) from the benchmark eigenvalue and have demonstrated sensitivity to the thermal scattering treatment of hydrogen in the U-Er-Zr-H fuel.

  20. Fresh-Core Reload of the Neutron Radiography (NRAD) Reactor with Uranium(20)-Erbium-Zirconium-Hydride Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Bess, John D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Maddock, Thomas L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Marshall, Margaret A. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Montierth, Leland M. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhang, Ning [Idaho National Lab. (INL), Idaho Falls, ID (United States); Phillips, Ann Marie [Idaho National Lab. (INL), Idaho Falls, ID (United States); Schreck, Kenneth A. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Briggs, J. Blair [Idaho National Lab. (INL), Idaho Falls, ID (United States); Woolstenhulme, Eric W. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bolin, John M. [General Atomics, San Diego, CA (United States); Veca, Anthony [General Atomics, San Diego, CA (United States); McKnight, Richard D. [Argonne National Lab. (ANL), Argonne, IL (United States); Lell, Richard M. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2014-03-01

    The neutron radiography (NRAD) reactor is a 250 kW TRIGA® (Training, Research, Isotopes, General Atomics) Mark II , tank-type research reactor currently located in the basement, below the main hot cell, of the Hot Fuel Examination Facility (HFEF) at the Idaho National Laboratory (INL). It is equipped with two beam tubes with separate radiography stations for the performance of neutron radiography irradiation on small test components. The 60-fuel-element operational core configuration of the NRAD LEU TRIGA reactor has been evaluated as an acceptable benchmark experiment. The initial critical configuration developed during the fuel loading process, which contains only 56 fuel elements, has not been evaluated as it is very similar to the evaluated core configuration. The benchmark eigenvalue is 1.0012 ± 0.0029. Calculated eigenvalues differ significantly (~±1%) from the benchmark eigenvalue and have demonstrated sensitivity to the thermal scattering treatment of hydrogen in the U-Er-Zr-H fuel.

  1. Optic nerve head analysis of superior segmental optic hypoplasia using Heidelberg retina tomography

    Directory of Open Access Journals (Sweden)

    Atsushi Miki

    2010-10-01

    Full Text Available Atsushi Miki1,2, Motohiro Shirakashi1, Kiyoshi Yaoeda1, Atsushi Fukushima1, Mineo Takagi1, Haruki Abe11Division of Ophthalmology and Visual Sciences, Niigata University Graduate School of Medical and Dental Sciences, Niigata, 2Department of Ophthalmology, Kawasaki Medical School, Okayama, JapanPurpose: To evaluate the optic disc characteristics of eyes with superior segmental optic hypoplasia (SSOH using the Heidelberg retina tomograph (HRT.Patients and methods: Thirteen eyes of 13 Japanese patients with SSOH were studied with the HRT (software version: 3.0. The group included six males and seven females, with a mean age of 34.7 years. Six optic disc parameters in the six sectors derived from the patients with SSOH were compared with those of 13 eyes of 13 normal controls. In addition, the diagnostic classification performance of the Frederick S Mikelberg (FSM discriminant function, glaucoma probability score (GPS, and Moorfields regression analysis (MRA were assessed.Results: When compared with normal subjects, many of the optic disc parameters were significantly altered in SSOH in the superior sectors. The area under the curve (AUC for the receiver operating characteristic was 0.932 for the rim area, 0.926 for the cup-to-disc area ratio, and 0.882 for the cup shape measure. Among the HRT parameters, the largest AUC (0.988 was found for the cup shape measure in the nasal superior segment. The proportion classified as outside normal limits by the FSM discriminant function was 92.3% (12 eyes. For GPS, six eyes (46.2% were classified as outside normal limits. For MRA, when borderline cases were considered test-negative or test-positive, 10 eyes (76.9% or 11 eyes (84.6% were classified as outside normal limits, respectively. The AUCs were 0.976 for the FSM discriminant function, 0.914 for the MRA overall classification, and 0.710 for the GPS overall classification.Conclusions: In eyes with SSOH, there is a significant thinning of the rim

  2. Dose Calculations for the Co-Disposal WP-of HLW-Glass and the Triga SNF

    Energy Technology Data Exchange (ETDEWEB)

    G. Radulescu

    1999-08-02

    This calculation is prepared by the Monitored Geologic Repository (MGR) Waste Package Operations (WPO). The purpose of this calculation is to determine the surface dose rates of a codisposal waste package (WP) containing a centrally located Department of Energy (DOE) standardized 18-in. spent nuclear fuel (SNF) canister, loaded with the TRIGA (Training, Research, Isotopes, General Atomics) SNF. This canister is surrounded by five 3-m long canisters, loaded with Savannah River Site (SRS) high-level waste (HLW) glass. The results are to support the WP design and radiological analyses.

  3. The intensity feedback system at Heidelberg Ion-Beam Therapy Centre

    Energy Technology Data Exchange (ETDEWEB)

    Schoemers, Christian, E-mail: christian.schoemers@med.uni-heidelberg.de; Feldmeier, Eike; Naumann, Jakob; Panse, Ralf; Peters, Andreas; Haberer, Thomas

    2015-09-21

    At Heidelberg Ion-Beam Therapy Centre (HIT), more than 2500 tumour patients have been treated with charged particle beams since 2009 using the raster scanning method. The tumour is irradiated slice-by-slice, each slice corresponding to a different beam energy. For the particle dose of each raster point the pre-irradiation by more distal slices has to be considered. This leads to highly inhomogeneous dose distributions within one iso-energy slice. The particles are extracted from the synchrotron via transverse RF knock-out. A pure feed forward control cannot take into account fluence inhomogeneities or deal with intensity fluctuations. So far, fluctuations have been counteracted by a reduced scanning velocity. We now added a feedback loop to the extraction system. The dose monitoring ionisation chambers in front of the patient have been coupled to the extraction device in the synchrotron. Characterization and implementation of the intensity feedback system into the HIT facility is described here. By its implementation the treatment time has been reduced by 10% in average.

  4. Amoxicillin / Clavulanic Acid and Cefotaxime Resistance in Salmonella Minnesota and Salmonella Heidelberg from Broiler Chickens

    Directory of Open Access Journals (Sweden)

    Rodrigues IBBE

    2017-10-01

    Full Text Available This study investigated the resistance of various Salmonella strains to beta-lactam antibiotics. Salmonella Minnesota (36 strains and Salmonella Heidelberg (24 strains were isolated from broiler chickens and carcasses by the Disk Diffusion Test and resistance genes blaCTX-M-8, blaACC-1 and blaCMY-2 were detected by PCR. Of the 60 strains tested, 80% were resistant to at least one antibiotic. Specifically, 66.7% were resistant to amoxicillin/clavulanic acid and 75% were resistant to cefotaxime. Among the amoxicillin/clavulanic acid resistant strains, the blaCMY-2 gene was detected in 40%, blaACC-1 in 37.5% and blaCTX-M-8 in 7.5%. Among the cefotaxime resistant strains, we detected the genes blaCTX-M-8 in 13.3%, blaACC-1 in 33.3%, and blaCMY-2 in 31.1%. The presence of cefotaxime- and amoxicillin/clavulanic acid-resistant Salmonella in poultry, and the prevalence of extended spectrum betalactamases and AmpC-betalactamases in these strains are of huge concern to public health and economy.

  5. A mineral magnetic characterization of the Plio-Pleistocene fluvial infill of the Heidelberg Basin (Germany)

    Science.gov (United States)

    Scheidt, Stephanie; Egli, Ramon; Frederichs, Thomas; Hambach, Ulrich; Rolf, Christian

    2017-08-01

    The Heidelberg Basin (Germany) hosts a quasi-continuous sedimentary sequence of primarily fluvial sediments with pedogenetic overprints and lacustrine intercalations. This unconsolidated succession has been shown to record a consistent magnetic polarity stratigraphy of the Quaternary and the late Neogene. Previous work has reported that sulphides and high-coercive minerals are the carriers of the remanent magnetization. Here, we provide the results of an extended mineral magnetic study that aims to disentangle the complex magnetic mineralogy. In addition, we assess the reliability of these minerals as carriers of palaeomagnetic signals. A major obstacle to the analysis of the drill cores was the large number of samples that were taken from a total core length of 1150 m. Rapid measurements on bulk samples provided only limited information on the magnetic mineralogy. In contrast, time-intensive methods such as first-order reversal curves (FORCs) or coercivity analyses, for example, yielded valuable information. The combined results of all the analyses consider the heterogeneous compositions of the sediments and indicate a varying palaeoenvironmental history. The Pliocene Iffezheim Formation was formed under alternating reducing and oxidizing conditions. Magnetite, maghemite, haematite and goethite are the predominant magnetic minerals. Sulphides were only preserved under specific conditions. The Pleistocene sediments reflect predominantly reducing conditions during sedimentation and diagenesis. Greigite, pyrite and most likely pyrrhotite have been shown to occur. Taken together, our work provides a detailed environmental magnetic record of the Plio-Pleistocene and elucidates the capabilities and limitations of rock magnetic studies performed on fluvial dominated sedimentary successions.

  6. A high-resolution spectrograph for the 72cm Waltz Telescope at Landessternwarte, Heidelberg

    Science.gov (United States)

    Tala, M.; Heeren, P.; Grill, M.; Harris, R. J.; Stürmer, J.; Schwab, C.; Gutcke, T.; Reffert, S.; Quirrenbach, A.; Seifert, W.; Mandel, H.; Geuer, L.; Schäffner, L.; Thimm, G.; Seeman, U.; Tietz, J.; Wagner, K.

    2016-08-01

    The Waltz Spectrograph is a fiber-fed high-resolution échelle spectrograph for the 72 cm Waltz Telescope at the Landessternwarte, Heidelberg. It uses a 31.6 lines/mm 63.5° blaze angle échelle grating in white-pupil configuration, providing a spectral resolving power of R 65,000 covering the spectral range between 450-800nm in one CCD exposure. A prism is used for cross-dispersion of échelle orders. The spectrum is focused by a commercial apochromat onto a 2k×2k CCD detector with 13.5μm per pixel. An exposure meter will be used to obtain precise photon-weighted midpoints of observations, which will be used in the computation of the barycentric corrections of measured radial velocities. A stabilized, newly designed iodine cell is employed for measuring radial velocities with high precision. Our goal is to reach a radial velocity precision of better than 5 m/s, providing an instrument with sufficient precision and sensitivity for the discovery of giant exoplanets. Here we describe the design of the Waltz spectrograph and early on-sky results.

  7. Kinematic differences between normal and low arched feet in children using the Heidelberg foot measurement method.

    Science.gov (United States)

    Twomey, D; McIntosh, A S; Simon, J; Lowe, K; Wolf, S I

    2010-05-01

    The purpose of this study was to investigate the kinematics of normal arched and low arched feet in children and use this data to quantify the differences between the two foot types during walking gait. Multi-segment foot motion was measured, using the Heidelberg foot measurement method (HFMM), for 25 normal arched feet and 27 low arched feet in 9-12-year-old children. The kinematic differences in the foot between the two groups during walking were relatively small, except for the medial arch and forefoot supination angles. The magnitude of the medial arch angle was approximately 10 degrees greater in the low arched group than the normal arched group throughout the gait cycle. There was a significant difference found in the forefoot supination angle (pfeet and highlight the mechanical differences in flexible flat feet in this age group. This data contributes to knowledge on foot kinematics in children and will be valuable for future research on the structure, function and potential treatment of the flexible flat foot. Copyright 2010 Elsevier B.V. All rights reserved.

  8. NUCLEAR REACTOR

    Science.gov (United States)

    Miller, H.I.; Smith, R.C.

    1958-01-21

    This patent relates to nuclear reactors of the type which use a liquid fuel, such as a solution of uranyl sulfate in ordinary water which acts as the moderator. The reactor is comprised of a spherical vessel having a diameter of about 12 inches substantially surrounded by a reflector of beryllium oxide. Conventionnl control rods and safety rods are operated in slots in the reflector outside the vessel to control the operation of the reactor. An additional means for increasing the safety factor of the reactor by raising the ratio of delayed neutrons to prompt neutrons, is provided and consists of a soluble sulfate salt of beryllium dissolved in the liquid fuel in the proper proportion to obtain the result desired.

  9. Frequency and duration of fecal shedding of Salmonella serovars Heidelberg and Typhimurium by experimentally infected laying hens housed in enriched colony cages at different stocking densities

    Science.gov (United States)

    Eggs contaminated with Salmonella Enteritidis are leading sources of human salmonellosis, but S. Heidelberg and S. Typhimurium are also egg-associated pathogens. The management practices and housing facilities characterizing different systems for housing commercial egg flocks can influence Salmonell...

  10. NUCLEAR REACTOR

    Science.gov (United States)

    Grebe, J.J.

    1959-07-14

    High temperature reactors which are uniquely adapted to serve as the heat source for nuclear pcwered rockets are described. The reactor is comprised essentially of an outer tubular heat resistant casing which provides the main coolant passageway to and away from the reactor core within the casing and in which the working fluid is preferably hydrogen or helium gas which is permitted to vaporize from a liquid storage tank. The reactor core has a generally spherical shape formed entirely of an active material comprised of fissile material and a moderator material which serves as a diluent. The active material is fabricated as a gas permeable porous material and is interlaced in a random manner with very small inter-connecting bores or capillary tubes through which the coolant gas may flow. The entire reactor is divided into successive sections along the direction of the temperature gradient or coolant flow, each section utilizing materials of construction which are most advantageous from a nuclear standpoint and which at the same time can withstand the operating temperature of that particular zone. This design results in a nuclear reactor characterized simultaneously by a minimum critiral size and mass and by the ability to heat a working fluid to an extremely high temperature.

  11. Damage by radiation in structural materials of BWR reactor vessels; Dano por radiacion en materiales estructurales de vasijas de reactores BWR

    Energy Technology Data Exchange (ETDEWEB)

    Robles, E.; Balcazar, M.; Alpizar, A.M.; Calderon, B.E. [Departamento de Sintesis y Caracterizacion de Materiales, Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2002-07-01

    The structural materials which are manufactured the pressure vessels of the BWR reactors undergo degradation in their mechanical properties mainly due to the damage produced by the fast neutrons (E> 1 MeV) coming from the reactor core. The mechanisms of neutron damage in this type of materials are experimentally studied, through the irradiation of vessel steel in experimental reactors for a quickly ageing. Alternately the neutron damage through steel irradiation with heavy ions is simulated. In this work the first results of the damage induced by irradiation of a similar steel to the vessel of a BWR reactor are shown. The irradiation was performed with fast neutrons (E> 1 MeV, fluence of 1.45 x 10{sup 18} n/cm{sup 2}) in the TRIGA Mark III Salazar reactor and separately with Ni{sup +3} ions in a Tandetrom accelerator (E= 4.8 MeV and an ion flux rank of 0.1 to 53 ions/A{sup 2}). (Author)

  12. PENGARUH GEMPA PATAHAN LEMBANG TERHADAP FLEKSIBILITAS PIPA DAN KEGAGALAN NOZEL PERALATAN SISTEM PENDINGIN PRIMER REAKTOR TRIGA 2000 BANDUNG

    Directory of Open Access Journals (Sweden)

    H.P. Raharjo

    2012-02-01

    Full Text Available Gempa bumi di suatu instalasi nuklir dapat menyebabkan terjadinya kerusakan sistem peralatan karena adanya perubahan fleksibilitas pipa akibat beban berlebih pada sistem perpipaannya. Beban dari sistem perpipaan dapat membebani nozel peralatan seperti pompa, penukar panas, dll. Apabila beban tersebut terlalu besar dan melebihi beban yang diizinkan akan mengakibatkan kegagalan nozel peralatan. Penelitian ini menganalisis besarnya beban-beban yang terjadi di semua nozel  sistem pendingin primer Reaktor TRIGA 2000 Bandung. Analisis dilakukan dengan bantuan perangkat lunak Caesar II yang berbasis metode elemen hingga (finite element method. Acuan analisis yang digunakan adalah code ASME B31.1 yang mengatur tentang perancangan sistem perpipaan untuk sistem pembangkit daya (Power Piping. Hasil analisis menunjukkan bahwa gaya yang terjadi pada nozel masukan pompa arah aksial (FZ melebihi batas yang diijinkan. Oleh karena itu perlu dilakukan modifikasi terhadap jalur perpipaan sistem pendingin tersebut agar nozel tidak menerima gaya yang berlebih. Penyangga pipa titik(node 22 di jalur PriOut dilepas dan/atau dipindahkan pada nozel masukkan pompa. Perpipaan sistem pendingin primer reaktor TRIGA 2000 Bandung akan aman beroperasi jika terjadi gempa.yang berasal dari patahan Lembang Kata kunci : gempa bumi, patahan, perpipaan, reaktor, sistem pendingin

  13. Utility of Heidelberg retinal tomography as a screening tool for analyzing retinal nerve fiber layer defects

    Directory of Open Access Journals (Sweden)

    Belyea DA

    2014-11-01

    Full Text Available David A Belyea, Rashed N Alhabshan, Sankaranarayana P Mahesh, Gregory S Gertner, Mirsad M Ibisevic,† Abdullah S Habib, Jacob A Dan Department of Ophthalmology, The George Washington University, Washington, DC, USA †Dr Mirsad Ibisevic passed away on January 4, 2013 Context: Although Heidelberg retinal tomography (HRT-generated topographic images have been studied extensively for the detection of retinal nerve fiber layer (RNFL defects, little is known about the role of HRT-generated surface reflectivity images in the detection of RNFL defects in either patients with glaucoma or glaucoma suspects. Aims: To evaluate the effectiveness of HRT version II (HRT II optic nerve reflectivity images in uncovering RNFL defects in an outpatient population evaluated for glaucoma.Study design/materials and methods: In 102 consecutive eyes from 60 patients evaluated for glaucoma in an academic-based practice, HRT II optic nerve images were prospectively imaged and compared with clinical optic nerve exam techniques to see if HRT II was able to detect RNFL defects overlooked in clinical practice. Results: Nine eyes (8.8% were found to have RNFL defects recognized by screening with HRT II. Of these nine eyes, eight (88.9% were recognized to demonstrate RNFL defects by conventional examination techniques. One additional eye had an RNFL defect seen on physical exam that was not detected by HRT. Conclusion: In academic practice, HRT II may be helpful in complementing conventional exam techniques in the recognition and documentation of acquired RNFL loss. Keywords: HRT, RNFL defect, optic nerve, glaucoma, glaucoma suspect

  14. Agreement among graders on Heidelberg retina tomograph (HRT) topographic change analysis (TCA) glaucoma progression interpretation.

    Science.gov (United States)

    Iester, Michele M; Wollstein, Gadi; Bilonick, Richard A; Xu, Juan; Ishikawa, Hiroshi; Kagemann, Larry; Schuman, Joel S

    2015-04-01

    To evaluate agreement among experts of Heidelberg retina tomography's (HRT) topographic change analysis (TCA) printout interpretations of glaucoma progression and explore methods for improving agreement. 109 eyes of glaucoma, glaucoma suspect and healthy subjects with ≥5 visits and 2 good quality HRT scans acquired at each visit were enrolled. TCA printouts were graded as progression or non-progression. Each grader was presented with 2 sets of tests: a randomly selected single test from each visit and both tests from each visit. Furthermore, the TCA printouts were classified with grader's individual criteria and with predefined criteria (reproducible changes within the optic nerve head, disregarding changes along blood vessels or at steep rim locations and signs of image distortion). Agreement among graders was modelled using common latent factor measurement error structural equation models for ordinal data. Assessment of two scans per visit without using the predefined criteria reduced overall agreement, as indicated by a reduction in the slope, reflecting the correlation with the common factor, for all graders with no effect on reducing the range of the intercepts between the graders. Using the predefined criteria improved grader agreement, as indicated by the narrower range of intercepts among the graders compared with assessment using individual grader's criteria. A simple set of predefined common criteria improves agreement between graders in assessing TCA progression. The inclusion of additional scans from each visit does not improve the agreement. We, therefore, recommend setting standardised criteria for TCA progression evaluation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  15. The doctrine on God, as demonstrated and confessed in the Heidelberg Catechism

    Directory of Open Access Journals (Sweden)

    Carel F.C.Coetzee

    2013-08-01

    Full Text Available Although the Heidelberg Catechism (HC does not deal with a systematic doctrine on God and although there are not many sources available on the specific subject, it is a most important subject when dealing with the theology of the HC (W. van ’t Spijker. Due to the prescribed length of the article, it only focuses on two aspects of the doctrine on God, namely the Trinity and the relationship between God and the cosmos (reality. Futhermore, today there is an emphasis on a new concept of God, known as Panentheism. In this concept, God and his creation are identified with each other. In the South African context, the article deals very shortly with the viewpoints of Spangenberg, Van Aarde and Müller in this regard. The God confessed in the HC is the triune God: Father, Son and Holy Spirit. In the closest and most logical coherence with this, the HC confesses the deity of Christ and of the Holy Spirit. The HC also proceeds from the premise of the historical, bodily resurrection of Christ from the dead. As far as the relationship between God and creation is concerned, the HC, in agreement with the church of the first centuries, confesses and teaches a personal God, the Father of Jesus Christ, who for the sake of Christ is the Father of the elect. This God is the almighty creator of heaven and earth. He lives in a covenant relationship with his creation, which he sustains and governs at every moment. He is both transcendent and immanent.

  16. Reactor Neutrinos

    CERN Document Server

    Lasserre, T; Lasserre, Thierry; Sobel, Henry W.

    2005-01-01

    We review the status and the results of reactor neutrino experiments, that toe the cutting edge of neutrino research. Short baseline experiments have provided the measurement of the reactor neutrino spectrum, and are still searching for important phenomena such as the neutrino magnetic moment. They could open the door to the measurement of coherent neutrino scattering in a near future. Middle and long baseline oscillation experiments at Chooz and KamLAND have played a relevant role in neutrino oscillation physics in the last years. It is now widely accepted that a new middle baseline disappearance reactor neutrino experiment with multiple detectors could provide a clean measurement of the last undetermined neutrino mixing angle theta13. We conclude by opening on possible use of neutrinos for Society: NonProliferation of Nuclear materials and Geophysics.

  17. NEUTRONIC REACTORS

    Science.gov (United States)

    Wigner, E.P.; Young, G.J.

    1958-10-14

    A method is presented for loading and unloading rod type fuel elements of a neutronic reactor of the heterogeneous, solld moderator, liquid cooled type. In the embodiment illustrated, the fuel rods are disposed in vertical coolant channels in the reactor core. The fuel rods are loaded and unloaded through the upper openings of the channels which are immersed in the coolant liquid, such as water. Unloading is accomplished by means of a coffer dam assembly having an outer sleeve which is placed in sealing relation around the upper opening. A radiation shield sleeve is disposed in and reciprocable through the coffer dam sleeve. A fuel rod engaging member operates through the axial bore in the radiation shield sleeve to withdraw the fuel rod from its position in the reactor coolant channel into the shield, the shield snd rod then being removed. Loading is accomplished in the reverse procedure.

  18. Neutronic reactor

    Science.gov (United States)

    Wende, Charles W. J.; Babcock, Dale F.; Menegus, Robert L.

    1983-01-01

    A nuclear reactor includes an active portion with fissionable fuel and neutron moderating material surrounded by neutron reflecting material. A control element in the active portion includes a group of movable rods constructed of neutron-absorbing material. Each rod is movable with respect to the other rods to vary the absorption of neutrons and effect control over neutron flux.

  19. Neutronic reactor

    Energy Technology Data Exchange (ETDEWEB)

    Babcock, D.F.; Menegus, R.L.; Wende, C.W.

    1983-01-04

    A nuclear reactor includes an active portion with fissionable fuel and neutron moderating material surrounded by neutron reflecting material. A control element in the active portion includes a group of movable rods constructed of neutron-absorbing material. Each rod is movable with respect to the other rods to vary the absorption of neutrons and effect control over neutron flux.

  20. Somatic mutation and recombination induced with reactor thermal neutrons in Drosophila melanogaster; Mutacion y recombinacion somaticas inducidas con neutrones termicos de reactor en Drosophila melanogaster

    Energy Technology Data Exchange (ETDEWEB)

    Zambrano A, F.; Guzman R, J.; Paredes G, L.; Delfin L, A. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1997-07-01

    The SMART test of Drosophila melanogaster was used to quantify the effect over the somatic mutation and recombination induced by thermal and fast neutrons at the TRIGA Mark III reactor of the ININ at the power of 300 k W for times of 30, 60 and 120 minutes with total equivalent doses respectively of 20.8, 41.6 and 83.2 Sv. A linear relation between the radiation equivalent dose and the frequency of the genetic effects such as mutation and recombination was observed. The obtained results allow to conclude that SMART is a sensitive system to the induced damage by neutrons, so this can be used for studying its biological effects. (Author)

  1. Heidelberg Neuro-Music Therapy Enhances Task-Negative Activity in Tinnitus Patients

    Directory of Open Access Journals (Sweden)

    Christoph M. Krick

    2017-07-01

    Full Text Available Background: Suffering from tinnitus causes mental distress in most patients. Recent findings point toward a diminished activity of the brain's default-mode network (DMN in subjects with mental disorders including depression or anxiety and also recently in subjects with tinnitus-related distress. We recently developed a therapeutic intervention, namely the Heidelberg Neuro-Music Therapy (HNMT, which shows an effective reduction of tinnitus-related distress following a 1-week short-term treatment. This approach offers the possibility to evaluate the neural changes associated with the improvements in tinnitus distress. We previously reported gray matter (GM reorganization in DMN regions and in primary auditory areas following HNMT in cases of recent-onset tinnitus. Here we evaluate on the same patient group, using functional MRI (fMRI, the activity of the DMN following the improvements tinnitus-related distress related to the HNMT intervention.Methods: The DMN activity was estimated by the task-negative activation (TNA during long inter-trial intervals in a word recognition task. The level of TNA was evaluated twice, before and after the 1-week study period, in 18 treated tinnitus patients (“treatment group,” TG, 21 passive tinnitus controls (PTC, and 22 active healthy controls (AC. During the study, the participants in TG and AC groups were treated with HNMT, whereas PTC patients did not receive any tinnitus-specific treatment. Therapy-related effects on DMN activity were assessed by comparing the pairs of fMRI records from the TG and PTC groups.Results: Treatment of the TG group with HNMT resulted in an augmented DMN activity in the PCC by 2.5% whereas no change was found in AC and PTC groups. This enhancement of PCC activity correlated with a reduction in tinnitus distress (Spearman Rho: −0.5; p < 0.005.Conclusion: Our findings show that an increased DMN activity, especially in the PCC, underlies the improvements in tinnitus

  2. Risks involved in the use of Enrofloxacin for Salmonella Enteritidis or Salmonella Heidelberg in commercial poultry

    Directory of Open Access Journals (Sweden)

    Eduardo Morales-Barrera

    2016-08-01

    Full Text Available The objectives of the present study were to evaluate the risks involved in the use of Enrofloxacin for Salmonella Enteritidis (SE or Salmonella Heidelberg (SH in commercial poultry and determine the effects of a probiotic as an antibiotic alternative. Two experiments were conducted to evaluate the risks involved in the use of Enrofloxacin for SE or SH in commercial poultry. Exp 1 consisted of 2 trials. In each trial, chickens were assigned to one of three groups; control + SE challenged; Enrofloxacin 25 mg/kg + SE; Enrofloxacin 50 mg/kg + SE. Chickens received Enrofloxacin in the drinking water from days 1 to 5 of age. On day 6, all groups received fresh water without any treatment. All chickens were orally gavaged with 107 cfu/chick of SE at 7 days of age and euthanized on 8 days of age. In Exp 2, turkey poults were assigned to one of the three groups; control + SH; probiotic + SH; Enrofloxacin 50 mg/kg + SH. Poults received probiotic or Enrofloxacin in the drinking water from days 1 to 5 of age. On day 6, poults received fresh water without any treatment. Poults were orally gavaged with 107 cfu/poult of SH at 7 days of age. Poults were weighted and humanely killed 24 h post-SH challenge to evaluate serum concentration of FITC-D to evaluate intestinal permeability, metagenomics and SH infection. In both trials of Exp 1, chickens treated with Enrofloxacin were more susceptible to SE organ invasion and intestinal colonization when compared with control non-treated chickens (P < 0.05. In Exp 2, poults treated with 50 mg/kg of Enrofloxacin showed an increase in body weight, however, this group also showed an increase in SH susceptibility, intestinal permeability and lower proportion of Firmicutes and Bacteroidetes, but with control group had the highest proportion of Proteobacteria. In contrast, poults that received the probiotic had the highest proportion of Firmicutes and Bacteroidetes, but lowest Proteobacteria. The results of the present study

  3. Heidelberg Neuro-Music Therapy Enhances Task-Negative Activity in Tinnitus Patients

    Science.gov (United States)

    Krick, Christoph M.; Argstatter, Heike; Grapp, Miriam; Plinkert, Peter K.; Reith, Wolfgang

    2017-01-01

    Background: Suffering from tinnitus causes mental distress in most patients. Recent findings point toward a diminished activity of the brain's default-mode network (DMN) in subjects with mental disorders including depression or anxiety and also recently in subjects with tinnitus-related distress. We recently developed a therapeutic intervention, namely the Heidelberg Neuro-Music Therapy (HNMT), which shows an effective reduction of tinnitus-related distress following a 1-week short-term treatment. This approach offers the possibility to evaluate the neural changes associated with the improvements in tinnitus distress. We previously reported gray matter (GM) reorganization in DMN regions and in primary auditory areas following HNMT in cases of recent-onset tinnitus. Here we evaluate on the same patient group, using functional MRI (fMRI), the activity of the DMN following the improvements tinnitus-related distress related to the HNMT intervention. Methods: The DMN activity was estimated by the task-negative activation (TNA) during long inter-trial intervals in a word recognition task. The level of TNA was evaluated twice, before and after the 1-week study period, in 18 treated tinnitus patients (“treatment group,” TG), 21 passive tinnitus controls (PTC), and 22 active healthy controls (AC). During the study, the participants in TG and AC groups were treated with HNMT, whereas PTC patients did not receive any tinnitus-specific treatment. Therapy-related effects on DMN activity were assessed by comparing the pairs of fMRI records from the TG and PTC groups. Results: Treatment of the TG group with HNMT resulted in an augmented DMN activity in the PCC by 2.5% whereas no change was found in AC and PTC groups. This enhancement of PCC activity correlated with a reduction in tinnitus distress (Spearman Rho: −0.5; p < 0.005). Conclusion: Our findings show that an increased DMN activity, especially in the PCC, underlies the improvements in tinnitus-related distress

  4. On the observability of the point kinetic equations of a nuclear reactor

    Energy Technology Data Exchange (ETDEWEB)

    Perez C, J.H.; Poznyak G, A. [CINVESTAV-IPN, AP. 14-740, Mexico D.F. (Mexico); Benitez R, J.S. [ININ, 52750 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: phhhantom2001@yahoo.com.mx

    2007-07-01

    In this work, the conditions to estimate non-measurable states of a nuclear reactor are studied. In a nuclear reactor, the main non-measurable variables are the delayed neutron precursor concentration and the internal reactivity. By certain techniques, these variables can be estimated from the reactor's input and output, that is the external reactivity and the neutron density, respectively. This reconstruction task is of fundamental importance if a state feedback control scheme or a failure detection system is to be implemented on the reactor. However, to guarantee the correct and safe functioning of these systems, it is necessary first to know under which conditions such reconstruction is possible. To this end, an exhaustive analysis of the observability conditions of the point kinetic equations of a reactor, in particular, a TRIGA-type is carried out here. The analysis consists of two stages. First, the equations are linearized with respect to any possible equilibrium point and not to a particular one as is usually made, thus exploiting completely the possibilities offered by the linearization technique. Then, an analysis of the observability of the general linear model is performed, obtaining the interesting result that the non-measurable states are observable except when the effective precursor radioactive decay constant and the reciprocal of the fuel-to-coolant heat transfer mean time have the same value, which does not occur, in practice, in a TRIGA reactor. Given that the system under study is nonlinear in nature, a follow-up analysis should be carried out to investigate if additional conditions to guarantee the observability exist. Thus, the second stage consists on extending the observability analysis to the nonlinear system. To better understand this second analysis, some results of the observability theory of nonlinear systems are summarized. The relevant result of the second stage is that, contrary to the linear case, the observability of the

  5. The characterization of Salmonella enterica serotypes isolated from the scalder tank water of a commercial poultry processing plant: Recovery of a multidrug-resistant Heidelberg strain.

    Science.gov (United States)

    Rothrock, Michael J; Ingram, Kimberly D; Gamble, John; Guard, Jean; Cicconi-Hogan, Kellie M; Hinton, Arthur; Hiett, Kelli L

    2015-03-01

    The recent multistate outbreak of a multidrug-resistant (MDR) Salmonella Heidelberg strain from commercial poultry production highlights the need to better understand the reservoirs of these zoonotic pathogens within the commercial poultry production and processing environment. As part of a larger study looking at temporal changes in microbial communities within the major water tanks within a commercial processing facility, this paper identifies and characterizes Salmonella enterica isolated from the water in a final scalder tank at 3 times during a typical processing day: prior to the birds entering the tank (start), halfway through the processing day (mid), and after the final birds were scalded (end). Over 3 consecutive processing days, no Salmonella were recovered from start-of-day water samples, while a total of 56 Salmonella isolates were recovered from the mid-day and end-of-day scalder water samples. Traditional and newer PCR-based serotyping methods eventually identified these isolates as either group C3 S. Kentucky (n=45) and group B S. Heidelberg (n=11). While none of the S. Kentucky isolates possessed any resistances to the antimicrobials tested, all S. Heidelberg isolates were found to be multidrug resistant to 5 specific antimicrobials representing 3 antimicrobial classes. Due to the potential public health impact of S. Heidelberg and the recent nationwide poultry-associated outbreak of multidrug-resistant S. Heidelberg, future studies should focus on understanding the transmission and environmental growth dynamics of this serotype within the commercial poultry processing plant environment. © 2015 Poultry Science Association Inc.

  6. From reformation to counter-reformation to further reformation: A picture of the anti-Roman background of the Heidelberg Catechism

    Directory of Open Access Journals (Sweden)

    Erik van Alten

    2013-08-01

    Full Text Available The anti-Roman sentiment of the Heidelberg Catechism is well-documented. In its contents the Catechism often seeks to combat Roman doctrine. However, this anti-Roman sentiment did not have its origin from textbooks and it was not merely an academic exercise. It was first and foremost a reaction to the ecclesiastical context of that time. At the same time that Elector Frederick III commissioned the writing of the Heidelberg Catechism, the Council of Trent was meeting on the other side of the Alpine mountains. Remarkably, this meeting had only recently decided to write a catechism of its own. It is very likely that the decision-makers in Heidelberg were aware of what was happening in Trent, and reacted accordingly. Underlying the decision to commission and write the Heidelberg Catechism was the acknowledgment of the importance of catechetical teaching. In several documents, which are closely related to the Heidelberg Catechism, the importance of catechetical teaching is highlighted. Interestingly, however, these documents also contrast the reformed principal of catechetical teaching with the Roman sacrament of confirmation. Whereas catechetical teaching leads children on the way from their baptism to the Lord’s Supper, the sacrament of confirmation takes away the urgency for any form of catechetical teaching.

  7. A hermeneutical reflection on the resurrection of Jesus Christ in question and answer 45 of the Heidelberg Catechism

    Directory of Open Access Journals (Sweden)

    Kobus Labuschagne

    2013-10-01

    Full Text Available This article is an attempt to elaborate hermeneutically on the different historical contexts, related the one to the other and to the centre point of the resurrection of Jesus Christ, in question and answer 45 of the Heidelberg Catechism. The aim is not only to find the true meaning that the Heidelberg Catechism intends to convey in the mentioned question and answer, but also to explain the underlying hermeneutical thinking as well as to bring to the surface and explain alternative assumptions that ordinary church-going Christians experience as the unusual outcome of an unknown and different kind of approach. Different hermeneutical processes lead to different outcomes of understanding − sometimes worlds apart. Vanuit die sentrale punt van die opstanding van Jesus Christus in vraag en antwoord 45 van die Heidelbergse Kategismus, wil hierdie artikel in ’n hermeneutiese besinning oor die verskillende verbandhoudende historiese kontekste uitbrei. Die doel is nie slegs om die ware betekenis te vind van wat die Heidelbergse Kategismus in genoemde vraag en antwoord poog om weer te gee nie, maar ook om die onderliggende hermeneutiese denke te verduidelik en alternatiewe aannames, wat gewone Christen-kerkgangers as ’n vreemde en verskillende benaderings ervaar, na die oppervlakte te bring en te verduidelik. Verskillende hermeneutiese prosesse lei tot verskillende uitkomste van verstaan – soms wêrelde van mekaar verwyderd.

  8. A hermeneutical reflection on the resurrection of Jesus Christ in question and answer 45 of the Heidelberg Catechism

    Directory of Open Access Journals (Sweden)

    Kobus Labuschagne

    2013-06-01

    Full Text Available This article is an attempt to elaborate hermeneutically on the different historical contexts, related the one to the other and to the centre point of the resurrection of Jesus Christ, in question and answer 45 of the Heidelberg Catechism. The aim is not only to find the true meaning that the Heidelberg Catechism intends to convey in the mentioned question and answer, but also to explain the underlying hermeneutical thinking as well as to bring to the surface and explain alternative assumptions that ordinary church-going Christians experience as the unusual outcome of an unknown and different kind of approach. Different hermeneutical processes lead to different outcomes of understanding − sometimes worlds apart. Vanuit die sentrale punt van die opstanding van Jesus Christus in vraag en antwoord 45 van die Heidelbergse Kategismus, wil hierdie artikel in ’n hermeneutiese besinning oor die verskillende verbandhoudende historiese kontekste uitbrei. Die doel is nie slegs om die ware betekenis te vind van wat die Heidelbergse Kategismus in genoemde vraag en antwoord poog om weer te gee nie, maar ook om die onderliggende hermeneutiese denke te verduidelik en alternatiewe aannames, wat gewone Christen-kerkgangers as ’n vreemde en verskillende benaderings ervaar, na die oppervlakte te bring en te verduidelik. Verskillende hermeneutiese prosesse lei tot verskillende uitkomste van verstaan – soms wêrelde van mekaar verwyderd.

  9. Mass measurements on stable nuclides in the rare-earth region with the Penning-trap mass spectrometer TRIGA-TRAP

    Science.gov (United States)

    Ketelaer, J.; Audi, G.; Beyer, T.; Blaum, K.; Block, M.; Cakirli, R. B.; Casten, R. F.; Droese, C.; Dworschak, M.; Eberhardt, K.; Eibach, M.; Herfurth, F.; Minaya Ramirez, E.; Nagy, Sz.; Neidherr, D.; Nörtershäuser, W.; Smorra, C.; Wang, M.

    2011-07-01

    The masses of 15 stable nuclides in the rare-earth region have been measured with the Penning-trap mass spectrometer TRIGA-TRAP. This is the first series of absolute mass measurements linking these nuclides to the atomic-mass standard C12. Previously, nuclear reaction studies almost exclusively determined the literature values of these masses in the Atomic-Mass Evaluation. The TRIGA-TRAP results show deviations on the order of 3-4 standard deviations from the latest published values of the Atomic-Mass Evaluation 2003 for some cases. However, the binding-energy differences that are important for nuclear structure studies have been confirmed and improved. The new masses are discussed in the context of valence proton-neutron interactions using double differences of binding energies, δVpn(Z,N).

  10. Nuclear Reactors. Revised.

    Science.gov (United States)

    Hogerton, John F.

    This publication is one of a series of information booklets for the general public published by the United States Atomic Energy Commission. Among the topics discussed are: How Reactors Work; Reactor Design; Research, Teaching, and Materials Testing; Reactors (Research, Teaching and Materials); Production Reactors; Reactors for Electric Power…

  11. Mikrokredite : Wissenschaftler der Universität Heidelberg erforschen in Indien die Wirkung von Mikrokrediten im Alltag am Beispiel neuer Varianten dieser Finanzierungsmethode

    OpenAIRE

    Klonner, Stefan

    2012-01-01

    "Campus-Report" heißt die Radiosendung der Universitäten Heidelberg, Mannheim, Karlsruhe und Freiburg. Die Reportagen über aktuelle Themen aus Forschung und Wissenschaft werden montags bis freitags jeweils um ca. 19.10h im Programm von Radio Regenbogen gesendet. (Empfang in Nordbaden: UKW 102,8. In Mittelbaden: 100,4 und in Südbaden: 101,1) Uni-Radio Baden: ein gemeinsames Projekt der Universitäten Freiburg, Heidelberg, Karlsruhe und Mannheim in Zusammenarbeit mit Radio Regenbogen – unterstüt...

  12. Genome Sequences of Salmonella enterica Serovar Heidelberg Isolates Isolated in the United States from a Multistate Outbreak of Human Salmonella Infections.

    Science.gov (United States)

    Hoffmann, Maria; Luo, Yan; Lafon, Patricia C; Timme, Ruth; Allard, Marc W; McDermott, Patrick F; Brown, Eric W; Zhao, Shaohua

    2013-01-01

    Salmonella enterica is recognized as one of the most common bacterial agents of foodborne illness. We report draft genomes of four Salmonella serovar Heidelberg isolates associated with the recent multistate outbreak of human Salmonella Heidelberg infections linked to kosher broiled chicken livers in the United States in 2011. Isolates 2011K-1259 and 2011K-1232 were recovered from humans, whereas 2011K-1724 and 2011K-1726 were isolated from chicken liver. Whole genome sequence analysis of these isolates provides a tool for studying the short-term evolution of these epidemic clones and can be used for characterizing potentially new virulence factors.

  13. Photocatalytic reactor

    Science.gov (United States)

    Bischoff, Brian L.; Fain, Douglas E.; Stockdale, John A. D.

    1999-01-01

    A photocatalytic reactor for processing selected reactants from a fluid medium comprising at least one permeable photocatalytic membrane having a photocatalytic material. The material forms an area of chemically active sites when illuminated by light at selected wavelengths. When the fluid medium is passed through the illuminated membrane, the reactants are processed at these sites separating the processed fluid from the unprocessed fluid. A light source is provided and a light transmitting means, including an optical fiber, for transmitting light from the light source to the membrane.

  14. Hybrid adsorptive membrane reactor

    Energy Technology Data Exchange (ETDEWEB)

    Tsotsis, Theodore T [Huntington Beach, CA; Sahimi, Muhammad [Altadena, CA; Fayyaz-Najafi, Babak [Richmond, CA; Harale, Aadesh [Los Angeles, CA; Park, Byoung-Gi [Yeosu, KR; Liu, Paul K. T. [Lafayette Hill, PA

    2011-03-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  15. D and DR Reactors

    Data.gov (United States)

    Federal Laboratory Consortium — The world's second full-scale nuclear reactor was the D Reactor at Hanford which was built in the early 1940's and went operational in December of 1944.D Reactor ran...

  16. Reactor transient

    Energy Technology Data Exchange (ETDEWEB)

    Menegus, R.L.

    1956-05-31

    The authors are planning a calculation to be done on the Univac at the Louviers Building to estimate the effect of xenon transients, a high reactor power. This memorandum outlines the reasons why they prefer to do the work at Louviers rather than at another location, such as N.Y.U. They are to calculate the response of the reactor to a sudden change in position of the half rods. Qualitatively, the response will be a change in the rooftop ratio of the neutron flux. The rooftop ratio may oscillate with high damping, or, instead, it may oscillate for many cycles. It has not been possible for them to determine this response by hand calculation because of the complexity of the problem, and yet it is important for them to be certain that high power operation will not lead us to inherently unstable operation. Therefore they have resorted to machine computation. The system of differential equations that describes the response has seven dependent variables; therefore there are seven equations, each coupled with one or more of the others. The authors have discussed the problem with R.R. Haefner at the plant, and it is his opinion that the IBM 650 cannot adequately handle the system of seven equations because the characteristic time constants vary over a range of about 10{sup 8}. The Univac located at the Louviers Building is said to be satisfactory for this computation.

  17. Development of a research reactor power measurement system using Cherenkov radiation

    Energy Technology Data Exchange (ETDEWEB)

    Salles, Brício M.; Mesquita, Amir Z., E-mail: briciomares@hotmail.com, E-mail: amir@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2017-11-01

    Nuclear research reactors are usually located in open pools, to allow visibility to the core and bluish luminosity of Cherenkov radiation. Usually the thermal power released in these reactors is monitored by chambers that measure the neutron flux, as it is proportional to the power. There are other methods used for power measurement, such as monitoring the core temperature and the energy balance in the heat exchanger. The brightness of Cherenkov's radiation is caused by the emission of visible electromagnetic radiation (in the blue band) by charged particles that pass through an insulating medium (water in nuclear research reactors) at a speed higher than that of light in this medium. This effect was characterized by Pavel Cherenkov, which earned him the Nobel Prize for Physics in 1958. The project's objective is to develop an innovative and alternative method for monitoring the power of nuclear research reactors. It will be performed by analyzing and monitoring the intensity of luminosity generated by Cherenkov radiation in the reactor core. This method will be valid for powers up to 250 kW, since above that value the luminosity saturates, as determined by previous studies. The reactor that will be used to test the method is the TRIGA, located at Nuclear Technology Development Center (CDTN), which currently has a maximum operating power of 250 kW. This project complies with International Atomic Energy Agency (IAEA) recommendations on reactor safety. It will give more redundancy and diversification in this measure and will not interfere with its operation. (author)

  18. Frozen chicken nuggets and strips--a newly identified risk factor for Salmonella Heidelberg infection in British Columbia, Canada.

    Science.gov (United States)

    MacDougall, Laura; Fyfe, Murray; McIntyre, Lorraine; Paccagnella, Ana; Cordner, Keir; Kerr, Alan; Aramini, Jeff

    2004-06-01

    Salmonella enterica var. Heidelberg was isolated from an unusual food source during routine case follow-up, prompting a case control investigation of frozen chicken nuggets and strips. Most frozen nuggets and strips are raw; however, par-frying lends a cooked appearance. As such, suitable food preparation precautions might not be undertaken by consumers. Cases were confirmed in the laboratory between 1 January and 1 April 2003. Controls were generated through forward-digit dialing and individually matched by age category. Telephone interviews were conducted, and limited sampling of unopened product was performed. Eighteen matched pairs were interviewed. The odds of infection were 11 times higher in individuals who had consumed frozen processed chicken nuggets and strips (95% confidence interval, 1.42 nuggets and strips to be precooked, and one quarter used the microwave, an ill-advised cooking method. Consumer misconceptions contributed to the risk of infection. Clear labels identifying nuggets and strips as raw poultry are needed.

  19. Evaluation of a Probiotic and a Competitive Exclusion Product Inoculated In Ovo on Broiler Chickens Challenged with Salmonella Heidelberg

    Directory of Open Access Journals (Sweden)

    IGO Silva

    Full Text Available ABSTRACT The present study evaluated a probiotic and a competitive exclusion product injected in ovo on day 18 of incubation together with Marek's disease vaccine in eggs of 56-week-old broiler breeders. Three experiments were carried out. The first trial evaluated the effect of treatments on hatchability, cecal colonization of Salmonella Heidelberg (SH, and intestinal mucosa immunity (immunoglobulin A levels in the intestinal fluid. The second trial evaluated the viability of the microorganisms in the products inoculated in a solution containing diluent and Marek's disease vaccine. The third trial evaluated the colonization of the cecal microbiota in non-challenged chickens during first four days of life by culturing cecal samples under aerobic and anaerobic conditions. Hatchability was not affected by the treatments. SH cecal counts were reduced in three-day-old broilers inoculated in ovo with the competitive exclusion product. Liver and spleen pool SH counts were not different among treatments. Broilers inoculated in ovo presented higher intestinal IgA titers 24 hours after SH challenge compared with the controls. When birds were not challenged, lower cecal microbial counts in aerobic culture were determined in the control group than in the probiotic group on day 3, and in the competitive exclusion group on day 2 when cultured in anaerobiosis. The products inoculated and diluted in the vaccine solution were viable at all analyzed periods when cultured in anaerobiosis. The results of this study suggest in-ovo inoculation is an effective route for the administration of the evaluated products, which effectively enhanced the broilers' immune response to a SH challenge, as shown by the increase in IgA titers, and the reduction in cecal Salmonella Heidelberg colonization with the in-ovo inoculation with the competitive exclusion product.

  20. Vitamin/mineral supplementation and cancer, cardiovascular, and all-cause mortality in a German prospective cohort (EPIC-Heidelberg).

    Science.gov (United States)

    Li, Kuanrong; Kaaks, Rudolf; Linseisen, Jakob; Rohrmann, Sabine

    2012-06-01

    To prospectively evaluate the association of vitamin/mineral supplementation with cancer, cardiovascular, and all-cause mortality. In the Heidelberg cohort of the European Prospective Investigation into Cancer and Nutrition (EPIC-Heidelberg), which was recruited in 1994-1998, 23,943 participants without pre-existing cancer and myocardial infarction/stroke at baseline were included in the analyses. Vitamin/mineral supplementation was assessed at baseline and during follow-up. Cox regression models were used to estimate hazard ratios (HRs) and 95% confidence intervals (CIs). After an average follow-up time of 11 years, 1,101 deaths were documented (cancer deaths = 513 and cardiovascular deaths = 264). After adjustment for potential confounders, neither any vitamin/mineral supplementation nor multivitamin supplementation at baseline was statistically significantly associated with cancer, cardiovascular, or all-cause mortality. However, baseline users of antioxidant vitamin supplements had a significantly reduced risk of cancer mortality (HR: 0.52; 95% CI: 0.28, 0.97) and all-cause mortality (HR: 0.58; 95% CI: 0.38, 0.88). In comparison with never users, baseline non-users who started taking vitamin/mineral supplements during follow-up had significantly increased risks of cancer mortality (HR: 1.74; 95% CI: 1.09, 2.77) and all-cause mortality (HR: 1.58; 95% CI: 1.17, 2.14). Based on limited numbers of users and cases, this cohort study suggests that supplementation of antioxidant vitamins might possibly reduce cancer and all-cause mortality. The significantly increased risks of cancer and all-cause mortality among baseline non-users who started taking supplements during follow-up may suggest a "sick-user effect," which researchers should be cautious of in future observational studies.

  1. The Stuttgart-Heidelberg Model of Active Feedback Driven Quality Management: Means for the Optimization of Psychotherapy Provision

    Directory of Open Access Journals (Sweden)

    Hans Kordy

    2003-01-01

    Full Text Available La gestión de la calidad busca la evaluación del tratamiento psicoterapéutico. Un aspecto central se relaciona con el desarrollo de baterías de evaluación y criterios de evaluación adecuados. El modelo Stuttgart-Heidelberg (S-H representa un sistema que proporciona conceptos, instrumentos psicométricos y un programa informático desarrollado para la gestión de la calidad basada en el feedback activo. La información central del modelo Stuttgart-Heidelberg es el resultado individual del tratamiento. El planteamiento es que la psicoterapia puede mejorarse si proporcionamos información sobre los resultados terapéuticos (en especial los negativos, pues los procesos de solución de problemas se estimularán por el feedback recibido. El presente trabajo presenta un inventario de evaluación, la evaluación estandarizada de los resultados y las diversas herramientas de feedback del modelo SH. Un estudio sistemático incluyendo 1715 pacientes de un hospital especializado en trastornos psicosomáticos documenta la validez de este abordaje. Los resultados empíricos refuerzan una estrategia de transparencia acerca de lo que acontece en la práctica clínica – por ejemplo, acerca de los tratamientos administrados, sus resultados y costos. Implicaciones para la posterior optimización de los servicios de salud son discutidos.

  2. Long-term effects of the “Heidelberg Model of Music Therapy” in patients with chronic tinnitus

    Science.gov (United States)

    Argstatter, Heike; Grapp, Miriam; Hutter, Elisabeth; Plinkert, Peter; Bolay, Hans Volker

    2012-01-01

    Objective The “Heidelberg Model of Music Therapy for Chronic Tinnitus” is a manualized short term treatment (nine 50-minutes sessions of individualized therapy on five consecutive days). It has proven to be efficient in reducing tinnitus symptoms in the short run. Now the long-term impact of the treatment after up to 5.4 years should be explored. Materials and methods 206 patients who had attended the neuro-music therapy were addressed in a structured follow-up questionnaire survey. 107 complete questionnaires entered analysis. Follow-up time was 2.65 (SD 1.1) years. Results 76% of the patients achieved a reliable reduction in their tinnitus scores, the overall tinnitus distress as measured by the Mini-TQ diminished from 11.9 (SD = 4.9) to 7.4 (SD = 5.2) points, 87% of the patients were satisfied by the way they were treated during therapy, and 71% of the patients did not undergo any further treatment after. Evaluation of therapeutic elements displays, that only music therapy specific interventions were rated helpful by the patients. Tinnitus related factors (such as tinnitus pitch or loudness, time since onset) did not influence therapy outcome but female gender, positive therapeutic relationship, and higher initial Mini-TQ scores became apparent as factors predicting better chances for greater therapy success. Discussion The “Heidelberg Model of Music Therapy for Chronic Tinnitus” seems to be effective in the long run. The outcome effect size of d’ = 0.89, can be accounted for as “large” effect and falls into the upper range value compared to established treatments. PMID:22993646

  3. Nuclear reactor neutron shielding

    Science.gov (United States)

    Speaker, Daniel P; Neeley, Gary W; Inman, James B

    2017-09-12

    A nuclear reactor includes a reactor pressure vessel and a nuclear reactor core comprising fissile material disposed in a lower portion of the reactor pressure vessel. The lower portion of the reactor pressure vessel is disposed in a reactor cavity. An annular neutron stop is located at an elevation above the uppermost elevation of the nuclear reactor core. The annular neutron stop comprises neutron absorbing material filling an annular gap between the reactor pressure vessel and the wall of the reactor cavity. The annular neutron stop may comprise an outer neutron stop ring attached to the wall of the reactor cavity, and an inner neutron stop ring attached to the reactor pressure vessel. An excore instrument guide tube penetrates through the annular neutron stop, and a neutron plug comprising neutron absorbing material is disposed in the tube at the penetration through the neutron stop.

  4. Food Grade Pimenta Leaf Essential Oil Reduces the Attachment of Salmonella enterica Heidelberg (2011 Ground Turkey Outbreak Isolate on to Turkey Skin

    Directory of Open Access Journals (Sweden)

    Divek V. T. Nair

    2017-11-01

    Full Text Available Salmonella attached to the poultry skin is a major source of carcass contamination during processing. Once attached to the poultry skin, it is difficult to detach and inactivate Salmonella by commonly used antimicrobial agents since the pathogen is entrapped deeply in the feather follicles and the crevices on the skin. Essential oils could be natural, safe, and effective alternatives to synthetic antimicrobial agents during commercial and organic processing setup. The present study evaluated the efficacy of pimenta (Pimenta officinalis Lindl. leaf essential oil (PEO, and its nanoemulsion in reducing Salmonella Heidelberg attachment on to turkey (Meleagris gallopavo skin during simulated scalding (65°C and chilling (4°C steps in poultry processing. A multidrug resistant S. Heidelberg isolate from the 2011 ground turkey outbreak in the United States was used in the study. Results showed that PEO and the nanoemulsion resulted in significant reduction of S. Heidelberg attachment on turkey skin. Turkey skin samples treated with 1.0% PEO for 5 min resulted in >2 log10 CFU/sq. inch reduction of S. Heidelberg at 65 and 4°C, respectively (n = 6; P < 0.05. Similarly, skin samples treated with 1.0% pimenta nanoemulsion (PNE for 5 min resulted in 1.5- and 1.8- log10 CFU/sq. inch reduction of S. Heidelberg at 65 and 4°C, respectively (n = 6; P < 0.05. In addition, PEO and PNE were effective in reducing S. Heidelberg on skin during short-term storage at 4 and 10°C (temperature abuse (n = 6; P < 0.05. No Salmonella was detected in the dipping solution containing 0.5 or 1.0% PEO or PNE, whereas a substantial population of the pathogen survived in the control dipping solution. The results were validated using scanning electron -, and confocal - microscopy techniques. PEO or PNE could be utilized as an effective antimicrobial agent to reduce S. Heidelberg attachment to turkey skin during poultry processing.

  5. Frequency and Duration of Fecal Shedding of Salmonella Serovars Heidelberg and Typhimurium by Experimentally Infected Laying Hens Housed in Enriched Colony Cages at Different Stocking Densities.

    Science.gov (United States)

    Gast, Richard K; Guraya, Rupa; Jones, Deana R; Guard, Jean; Anderson, Kenneth E; Karcher, Darrin M

    2017-09-01

    Eggs contaminated with Salmonella Enteritidis are leading sources of human salmonellosis, but Salmonella Heidelberg and Salmonella Typhimurium are also egg-associated pathogens. The management practices and housing facilities characterizing different systems for housing commercial egg flocks can influence Salmonella persistence and transmission. Animal welfare aspects of poultry housing have been widely debated, but their food safety ramifications are not thoroughly understood. The present study assessed the effects of two different bird stocking densities on the frequency and duration of fecal shedding of strains of Salmonella Heidelberg and Salmonella Typhimurium in groups of experimentally infected laying hens housed in colony cages enriched with perching and nesting areas. In separate trials, laying hens were distributed into two groups housed in enriched colony cages at stocking densities of 648 and 973 cm(2)/bird, and a third group was housed in conventional cages at 648 cm(2)/bird. All hens were orally inoculated with doses of 10(8) colony-forming units (CFU) of either Salmonella Heidelberg or Salmonella Typhimurium. At eight weekly postinoculation intervals, samples of voided feces were collected from beneath each cage and cultured to detect Salmonella. Fecal shedding of Salmonella Heidelberg continued for 8 wk in all housing groups, but Salmonella Typhimurium shedding ceased after as little as 5 wk in enriched colony cages at low stocking density. After Salmonella Heidelberg infection, the overall frequency of positive fecal cultures for all sampling dates combined was significantly (P < 0.05) greater from either conventional cages (51.0%) or enriched colony cages (46.5%) at high stocking density than from enriched colony cages at low stocking density (33.3%). No significant differences in Salmonella Typhimurium fecal isolation were identified between housing groups. These results demonstrate that stocking density can affect intestinal colonization and

  6. Dosimetric feasibility study for an extracorporeal BNCT application on liver metastases at the TRIGA Mainz.

    Science.gov (United States)

    Blaickner, M; Kratz, J V; Minouchehr, S; Otto, G; Schmidberger, H; Schütz, C; Vogtländer, L; Wortmann, B; Hampel, G

    2012-01-01

    This study investigates the dosimetric feasibility of Boron Neutron Capture Therapy (BNCT) of explanted livers in the thermal column of the research reactor in Mainz. The Monte Carlo code MCNP5 is used to calculate the biologically weighted dose for different ratios of the (10)B-concentration in tumour to normal liver tissue. The simulation results show that dosimetric goals are only partially met. To guarantee effective BNCT treatment the organ has to be better shielded from all gamma radiation. Copyright © 2011 Elsevier Ltd. All rights reserved.

  7. A neutron tomography facility at a low power research reactor

    CERN Document Server

    Körner, S; Von Tobel, P; Rauch, H

    2001-01-01

    Neutron radiography (NR) provides a very efficient tool in the field of non-destructive testing as well as for many applications in fundamental research. A neutron beam penetrating a specimen is attenuated by the sample material and detected by a two-dimensional (2D) imaging device. The image contains information about materials and structure inside the sample because neutrons are attenuated according to the basic law of radiation attenuation. Contrary to X-rays, neutrons can be attenuated by some light materials, as for example, hydrogen and boron, but penetrate many heavy materials. Therefore, NR can yield important information not obtainable by more traditional methods. Nevertheless, there are many aspects of structure, both quantitative and qualitative, that are not accessible from 2D transmission images. Hence, there is an interest in three-dimensional neutron imaging. At the 250 kW TRIGA Mark II reactor of the Atominstitut in Austria a neutron tomography facility has been installed. The neutron flux at ...

  8. Fabrication and Testing of a Modular Micro-Pocket Fission Detector Instrumentation System for Test Nuclear Reactors

    Directory of Open Access Journals (Sweden)

    Reichenberger Michael A.

    2018-01-01

    Full Text Available Advancements in nuclear reactor core modeling and computational capability have encouraged further development of in-core neutron sensors. Measurement of the neutron-flux distribution within the reactor core provides a more complete understanding of the operating conditions in the reactor than typical ex-core sensors. Micro-Pocket Fission Detectors have been developed and tested previously but have been limited to single-node operation and have utilized highly specialized designs. The development of a widely deployable, multi-node Micro-Pocket Fission Detector assembly will enhance nuclear research capabilities. A modular, four-node Micro-Pocket Fission Detector array was designed, fabricated, and tested at Kansas State University. The array was constructed from materials that do not significantly perturb the neutron flux in the reactor core. All four sensor nodes were equally spaced axially in the array to span the fuel-region of the reactor core. The array was filled with neon gas, serving as an ionization medium in the small cavities of the Micro-Pocket Fission Detectors. The modular design of the instrument facilitates the testing and deployment of numerous sensor arrays. The unified design drastically improved device ruggedness and simplified construction from previous designs. Five 8-mm penetrations in the upper grid plate of the Kansas State University TRIGA Mk. II research nuclear reactor were utilized to deploy the array between fuel elements in the core. The Micro-Pocket Fission Detector array was coupled to an electronic support system which has been specially developed to support pulse-mode operation. The Micro-Pocket Fission Detector array composed of four sensors was used to monitor local neutron flux at a constant reactor power of 100 kWth at different axial locations simultaneously. The array was positioned at five different radial locations within the core to emulate the deployment of multiple arrays and develop a 2-dimensional

  9. Fabrication and Testing of a Modular Micro-Pocket Fission Detector Instrumentation System for Test Nuclear Reactors

    Science.gov (United States)

    Reichenberger, Michael A.; Nichols, Daniel M.; Stevenson, Sarah R.; Swope, Tanner M.; Hilger, Caden W.; Roberts, Jeremy A.; Unruh, Troy C.; McGregor, Douglas S.

    2018-01-01

    Advancements in nuclear reactor core modeling and computational capability have encouraged further development of in-core neutron sensors. Measurement of the neutron-flux distribution within the reactor core provides a more complete understanding of the operating conditions in the reactor than typical ex-core sensors. Micro-Pocket Fission Detectors have been developed and tested previously but have been limited to single-node operation and have utilized highly specialized designs. The development of a widely deployable, multi-node Micro-Pocket Fission Detector assembly will enhance nuclear research capabilities. A modular, four-node Micro-Pocket Fission Detector array was designed, fabricated, and tested at Kansas State University. The array was constructed from materials that do not significantly perturb the neutron flux in the reactor core. All four sensor nodes were equally spaced axially in the array to span the fuel-region of the reactor core. The array was filled with neon gas, serving as an ionization medium in the small cavities of the Micro-Pocket Fission Detectors. The modular design of the instrument facilitates the testing and deployment of numerous sensor arrays. The unified design drastically improved device ruggedness and simplified construction from previous designs. Five 8-mm penetrations in the upper grid plate of the Kansas State University TRIGA Mk. II research nuclear reactor were utilized to deploy the array between fuel elements in the core. The Micro-Pocket Fission Detector array was coupled to an electronic support system which has been specially developed to support pulse-mode operation. The Micro-Pocket Fission Detector array composed of four sensors was used to monitor local neutron flux at a constant reactor power of 100 kWth at different axial locations simultaneously. The array was positioned at five different radial locations within the core to emulate the deployment of multiple arrays and develop a 2-dimensional measurement of

  10. Remediation measures at the former hazardous waste dump at Malsch near Heidelberg; Sanierung der ehemaligen Sonderabfalldeponie Malsch. Hydrogeologische Bewertung

    Energy Technology Data Exchange (ETDEWEB)

    Hanstein, P.; Hoetzl, H. [Karlsruhe Univ. (T.H.) (Germany). Lehrstuhl fuer Angewandte Geologie

    1998-12-31

    The former hazardous waste deposit of Malsch is located south of Heidelberg at the eastern margin of the Upper Rhine Graben. Using a former clay pit about 700.000 m{sup 3} of partly high toxic organic and inorganic wastes were deposited from 1971 to 1984. A leakage from the deposit was first recognised in 1984. Detailed investigation showed that thin channel-like conglomerate layers intercalated in the clays and marls as well as faults are cropping out into the base of the deposit and cause a direct seepage of leachate. Contaminants pollute the downstream area over a distance of 500 m. Remediation measures adding up to 100 Mio. DM were carried out including the construction of a slurry wall encircling laterally the whole site, a surface cover with a multi-liner system as well as a pump and treat system for the leachate was installed and are now in operation. Model studies of the ground water flow including a 3-dimensional site model and a 2-dimensional regional model started during the remediation work. According to the complex geological situation specific procedures was applied to transform the heterogeneous tectonical structure into the numerical models. The balance of water flowing through the deposit was calculated by the piezometric heads to assess different remediation stages. In spite of the missing impervious base the calculation could prove that in connection of a certain pumping rate of the leachate the environment and especially the groundwater can be protected from further leakage. (orig.) [Deutsch] Die fruehere Sonderabfalldeponie Malsch wurde 1971 in einer stillgelegten Tongrube suedlich von Heidelberg am oestlichen Rand des Oberrheingrabens angelegt und bis 1984 betrieben. Insgesamt wurden ueber 700.000 m{sup 3} zum Teil hochtoxische organische und anorganische Sonderabfaelle abgelagert. Mit Abschluss der Deponierungsphase wurden Sickerwasseraustritte im westlichen Deponievorfeld festgelstellt. Ursache fuer die Undichtigkeiten waren geringmaechtige

  11. Relationship between short-wavelength automatic perimetry and Heidelberg retina tomograph parameters in eyes with ocular hypertension

    Directory of Open Access Journals (Sweden)

    Christos Pitsas

    2015-10-01

    Full Text Available AIM:To compare and correlate optic nerve head parameters obtained byHeidelberg retina tomograph (HRT with short-wavelength automatic perimetry (SWAP indices in eyes with ocular hypertension (OHT.METHODS: One hundred and forty-six patients with OHT included in the present study. All subjects had reliable SWAP and HRT measurements performed within a 2wk period. The eyes were classified as normal/abnormal according to visual field criteria and Moorfields regression analysis (MRA. Correlations between visual field indices and HRT parameters were analyzed using Pearson correlation coefficient (r.RESULTS:Twenty-nine eyes (19.9% had SWAP defects. Twenty-nine eyes (19.9% were classified as abnormal according to global MRA. Six eyes (4.1% had abnormal global MRA and SWAP defects. The k statistic is 0.116 (P=0.12 indicating a very poor agreement between the methods. No statistical significant correlation between HRT and SWAP parameters was detected.CONCLUSION:SWAP defects may coexist with abnormalities of optic disc detected by HRT in eyes with OHT. In most eyes, however, the two methods detect different glaucoma properties.

  12. Status of the 7 MeV/u, 217 MHz Injector Linac for the Heidelberg Cancer Therapy Facility

    CERN Document Server

    Schlitt, B; Hutter, G; Klos, F; Lu, Y; Minaev, S A; Mühle, C; Ratzinger, U; Schlitt, B; Tiede, R; Vinzenz, W; Will, C; Zurkan, O

    2004-01-01

    A clinical synchrotron facility for cancer therapy using energetic proton and ion beams (C, He and O) is under construction and will be installed at the Radiologische Universitätsklinik in Heidelberg, Germany, starting in 2005. The status of the ECR ion source systems, the beam line components of the low energy beam transport lines, the 400 keV/u RFQ and the 20 MV IH-cavity as well as the linac rf system will be reported. Two prototype magnets of the linac quadrupole magnets have been built at GSI and have been tested successfully. A test bench for the 1.4 MW, 217 MHz cavity amplifier built by industry has been installed at GSI including a 120 kW driver amplifier which will be used also for high power tests of the RFQ. A test bench for the RFQ using proton beams is presently being set up at the IAP. RF tuning of the 1:2 scaled IH-DTL model as well as Microwave Studio simulations of the model and the power cavity have been also performed at the IAP [1].

  13. Frozen chicken nuggets and strips and eggs are leading risk factors for Salmonella Heidelberg infections in Canada.

    Science.gov (United States)

    Currie, A; MacDougall, L; Aramini, J; Gaulin, C; Ahmed, R; Isaacs, S

    2005-10-01

    A case-control study was conducted from 1 January to 31 May 2003 to identify risk factors for S . Heidelberg infection in Canada. Controls were pair-matched by age group and telephone exchange to 95 cases. Exposures in the 7 days before illness/interview were assessed using multivariate conditional logistic regression. Consumption of home-prepared chicken nuggets and/or strips [matched odds ratio (mOR) 4.0, 95% confidence interval (CI) 1.4-13.8], and undercooked eggs (mOR 7.5, 95% CI 1.5-75.5) increased the risk of illness. Exposure to a farm setting lowered the risk (mOR 0.22, 95% CI 0.03-1.00). The population-attributable fraction associated with chicken nuggets/strips was 34% and with undercooked eggs was 16%. One-third of study participants did not perceive, handle or prepare chicken nuggets and strips as high-risk products, although the majority of the products on the Canadian market are raw. These findings have prompted changes in product-labelling policy and consumer education.

  14. Lactobacillus bulgaricus, Lactobacillus rhamnosus and Lactobacillus paracasei Attenuate Salmonella Enteritidis, Salmonella Heidelberg and Salmonella Typhimurium Colonization and Virulence Gene Expression In Vitro

    OpenAIRE

    Muyyarikkandy, Muhammed Shafeekh; Amalaradjou, Mary Anne

    2017-01-01

    Salmonella Enteritidis (SE), Salmonella Typhimurium (ST), and Salmonella Heidelberg (SH) have been responsible for numerous outbreaks associated with the consumption of poultry meat and eggs. Salmonella colonization in chicken is characterized by initial attachment to the cecal epithelial cells (CEC) followed by dissemination to the liver, spleen, and oviduct. Since cecal colonization is critical to Salmonella transmission along the food chain continuum, reducing this intestinal association c...

  15. Colonization of internal organs by Salmonella serovars Heidelberg and Typhimurium in experimentally infected laying hens housed in enriched colony cages at different stocking densities.

    Science.gov (United States)

    Gast, Richard K; Guraya, Rupa; Jones, Deana R; Guard, Jean; Anderson, Kenneth E; Karcher, Darrin M

    2017-05-01

    Contaminated eggs produced by infected commercial laying flocks are often implicated as sources of human infections with Salmonella Enteritidis, but Salmonella serovars Heidelberg and Typhimurium have also been associated with egg-transmitted illness. Contamination of the edible contents of eggs is a consequence of the colonization of reproductive tissues in systemically infected hens. In recent years, the animal welfare implications of diverse poultry housing and management systems have been vigorously debated, but the food safety significance of laying hen housing remains uncertain. The present study evaluated the effects of 2 different bird stocking densities on the invasion of internal organs by Salmonella serovars Heidelberg and Typhimurium in groups of experimentally infected laying hens housed in colony cages enriched with perching and nesting areas. Laying hens were distributed at 2 different stocking densities (648 and 973 cm2/bird) into colony cages and (along with a group housed in conventional cages at 648 cm2/bird) orally inoculated with doses of 107 cfu of 2-strain cocktails of either Salmonella Heidelberg or Salmonella Typhimurium. At 5 to 6 d post-inoculation, hens were euthanized and samples of internal organs (cecum, liver, spleen, ovary, and oviduct) were removed for bacteriologic culturing. The overall frequency of Salmonella isolation from ceca after inoculation with strains of serovar Heidelberg (83.3%) was significantly (P  0.05) between stocking densities or cage systems in the frequencies of isolation of either Salmonella serovar from any of the five sampled tissues. These results contrast with prior studies, which reported increased susceptibility to internal organ invasion by Salmonella Enteritidis among hens in conventional cages at higher stocking densities. Published by Oxford University Press on behalf of Poultry Science Association 2016. This work is written by (a) US Government employee(s) and is in the public domain in the US.

  16. Creating student sleuths: how a team of graduate students helped solve an outbreak of Salmonella Heidelberg infections associated with kosher broiled chicken livers.

    Science.gov (United States)

    Hanson, Heather; Hancock, W Thane; Harrison, Cassandra; Kornstein, Laura; Waechter, HaeNa; Reddy, Vasudha; Luker, John; Malavet, Michelle; Huth, Paula; Gieraltowski, Laura; Balter, Sharon

    2014-08-01

    Since 2009, the New York City Department of Health and Mental Hygiene (DOHMH) has received FoodCORE funding to hire graduate students to conduct in-depth food exposure interviews of salmonellosis case patients. In 2011, an increase in the number of Salmonella Heidelberg infections with pulsed-field gel electrophoresis Xba I pattern JF6X01.0022 among observant Jewish communities in New York and New Jersey was investigated. As this pattern is common nationwide, some cases identified were not associated with the outbreak. To reduce the number of background cases, DOHMH focused on the community initially identified in the outbreak and defined a case as a person infected with the outbreak strain of Salmonella Heidelberg with illness onset from 1 April to 17 November 2011 and who consumed a kosher diet, spoke Yiddish, or self-identified as Jewish. Nationally, 190 individuals were infected with the outbreak strain of Salmonella Heidelberg; 63 New York City residents met the DOHMH case definition. In October 2011, the graduate students (Team Salmonella) interviewed three case patients who reported eating broiled chicken livers. Laboratory testing of chicken liver samples revealed the outbreak strain of Salmonella Heidelberg. Although they were only partially cooked, the livers appeared fully cooked, and consumers and retail establishment food handlers did not cook them thoroughly before eating or using them in a ready-to-eat spread. This investigation highlighted the need to prevent further illnesses from partially cooked chicken products. Removing background cases helped to focus the investigation. Training graduate students to collect exposure information can be a highly effective model for conducting foodborne disease surveillance and outbreak investigations for local and state departments of public health.

  17. Eddy current examination of the nuclear fuel elements with aluminum 1100-F cladding of IPR-R1 research reactor: An initial study

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Roger F. da; Silva Júnior, Silvério F. da; Frade, Rangel T. [Centro de Desenvolvimento da Tecnologia Nucelar (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Rodrigues, Juliano S., E-mail: rfs@cdtn.br, E-mail: silvasf@cdtn.br, E-mail: rtf@cdtn.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil)

    2017-07-01

    Tubes of aluminum 1100-F as well as tubes of AISI 304 stainless steel are used as cladding of the fuel elements of TRIGA IPR-R1 nuclear research reactor. Usually, these tubes are inspected by means of visual test and sipping test. The visual test allows the detection of changes occurred at the external fuel elements surface, such as those promoted by corrosion processes. However, this test method cannot be used for detection of internal discontinuities at the tube walls. Sipping test allows the detection of fuel elements whose cladding has failed, but it is not able to determine the place where the discontinuity is located. On the other hand, eddy current testing, an electromagnetic nondestructive test method, allows the detection of discontinuities and monitoring their growth. In previous works, the application of eddy current testing to evaluate the AISI 304 cladding fuel elements of TRIGA IPR-R1 was studied. In this paper, it is proposed an initial study about the use of eddy current testing for detection and characterization of discontinuities in the aluminum 1100-F fuel elements cladding. The study includes the development of probes and the design and manufacture of reference standards. (author)

  18. Hybrid plasmachemical reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lelevkin, V. M., E-mail: lelevkin44@mail.ru; Smirnova, Yu. G.; Tokarev, A. V. [Kyrgyz-Russian Slavic University (Kyrgyzstan)

    2015-04-15

    A hybrid plasmachemical reactor on the basis of a dielectric barrier discharge in a transformer is developed. The characteristics of the reactor as functions of the dielectric barrier discharge parameters are determined.

  19. Attrition reactor system

    Science.gov (United States)

    Scott, Charles D.; Davison, Brian H.

    1993-01-01

    A reactor vessel for reacting a solid particulate with a liquid reactant has a centrifugal pump in circulatory flow communication with the reactor vessel for providing particulate attrition, resulting in additional fresh surface where the reaction can occur.

  20. Guidebook to nuclear reactors

    Energy Technology Data Exchange (ETDEWEB)

    Nero, A.V. Jr.

    1976-05-01

    A general introduction to reactor physics and theory is followed by descriptions of commercial nuclear reactor types. Future directions for nuclear power are also discussed. The technical level of the material is suitable for laymen.

  1. Unusually high illness severity and short incubation periods in two foodborne outbreaks of Salmonella Heidelberg infections with potential coincident Staphylococcus aureus intoxication.

    Science.gov (United States)

    Nakao, J H; Talkington, D; Bopp, C A; Besser, J; Sanchez, M L; Guarisco, J; Davidson, S L; Warner, C; McINTYRE, M G; Group, J P; Comstock, N; Xavier, K; Pinsent, T S; Brown, J; Douglas, J M; Gomez, G A; Garrett, N M; Carleton, H A; Tolar, B; Wise, M E

    2018-01-01

    We describe the investigation of two temporally coincident illness clusters involving salmonella and Staphylococcus aureus in two states. Cases were defined as gastrointestinal illness following two meal events. Investigators interviewed ill persons. Stool, food and environmental samples underwent pathogen testing. Alabama: Eighty cases were identified. Median time from meal to illness was 5·8 h. Salmonella Heidelberg was identified from 27 of 28 stool specimens tested, and coagulase-positive S. aureus was isolated from three of 16 ill persons. Environmental investigation indicated that food handling deficiencies occurred. Colorado: Seven cases were identified. Median time from meal to illness was 4·5 h. Five persons were hospitalised, four of whom were admitted to the intensive care unit. Salmonella Heidelberg was identified in six of seven stool specimens and coagulase-positive S. aureus in three of six tested. No single food item was implicated in either outbreak. These two outbreaks were linked to infection with Salmonella Heidelberg, but additional factors, such as dual aetiology that included S. aureus or the dose of salmonella ingested may have contributed to the short incubation periods and high illness severity. The outbreaks underscore the importance of measures to prevent foodborne illness through appropriate washing, handling, preparation and storage of food.

  2. Impact of plasmids, including those encodingVirB4/D4 type IV secretion systems, on Salmonella enterica serovar Heidelberg virulence in macrophages and epithelial cells.

    Science.gov (United States)

    Gokulan, Kuppan; Khare, Sangeeta; Rooney, Anthony W; Han, Jing; Lynne, Aaron M; Foley, Steven L

    2013-01-01

    Salmonella enterica serovar Heidelberg (S. Heidelberg) can cause foodborne illness in humans following the consumption of contaminated meat and poultry products. Recent studies from our laboratory have demonstrated that certain S. Heidelberg isolated from food-animal sources harbor multiple transmissible plasmids with genes that encode antimicrobial resistance, virulence and a VirB4/D4 type-IV secretion system. This study examines the potential role of these transmissible plasmids in bacterial uptake and survival in intestinal epithelial cells and macrophages, and the molecular basis of host immune system modulation that may be associated with disease progression. A series of transconjugant and transformant strains were developed with different combinations of the plasmids to determine the roles of the individual and combinations of plasmids on virulence. Overall the Salmonella strains containing the VirB/D4 T4SS plasmids entered and survived in epithelial cells and macrophages to a greater degree than those without the plasmid, even though they carried other plasmid types. During entry in macrophages, the VirB/D4 T4SS encoding genes are up-regulated in a time-dependent fashion. When the potential mechanisms for increased virulence were examined using an antibacterial Response PCR Array, the strain containing the T4SS down regulated several host innate immune response genes which likely contributed to the increased uptake and survival within macrophages and epithelial cells.

  3. Characterization of bacterial and archaeal communities in air-cathode microbial fuel cells, open circuit and sealed-off reactors

    KAUST Repository

    Chehab, Noura A.

    2013-06-18

    A large percentage of organic fuel consumed in a microbial fuel cell (MFC) is lost as a result of oxygen transfer through the cathode. In order to understand how this oxygen transfer affects the microbial community structure, reactors were operated in duplicate using three configurations: closed circuit (CC; with current generation), open circuit (OC; no current generation), and sealed off cathodes (SO; no current, with a solid plate placed across the cathode). Most (98 %) of the chemical oxygen demand (COD) was removed during power production in the CC reactor (maximum of 640 ± 10 mW/m 2), with a low percent of substrate converted to current (coulombic efficiency of 26.5 ± 2.1 %). Sealing the cathode reduced COD removal to 7 %, but with an open cathode, there was nearly as much COD removal by the OC reactor (94.5 %) as the CC reactor. Oxygen transfer into the reactor substantially affected the composition of the microbial communities. Based on analysis of the biofilms using 16S rRNA gene pyrosequencing, microbes most similar to Geobacter were predominant on the anodes in the CC MFC (72 % of sequences), but the most abundant bacteria were Azoarcus (42 to 47 %) in the OC reactor, and Dechloromonas (17 %) in the SO reactor. Hydrogenotrophic methanogens were most predominant, with sequences most similar to Methanobacterium in the CC and SO reactor, and Methanocorpusculum in the OC reactors. These results show that oxygen leakage through the cathode substantially alters the bacterial anode communities, and that hydrogenotrophic methanogens predominate despite high concentrations of acetate. The predominant methanogens in the CC reactor most closely resembled those in the SO reactor, demonstrating that oxygen leakage alters methanogenic as well as general bacterial communities. © 2013 Springer-Verlag Berlin Heidelberg.

  4. NUCLEAR REACTOR CONTROL SYSTEM

    Science.gov (United States)

    Epler, E.P.; Hanauer, S.H.; Oakes, L.C.

    1959-11-01

    A control system is described for a nuclear reactor using enriched uranium fuel of the type of the swimming pool and other heterogeneous nuclear reactors. Circuits are included for automatically removing and inserting the control rods during the course of normal operation. Appropriate safety circuits close down the nuclear reactor in the event of emergency.

  5. Avaliação da autofluorescência do fundo de olho nas distrofias de retina com o aparelho Heidelberg Retina Angiograph2 Evaluation of fundus autofluorescence in hereditary retinal diseases using Heidelberg Retina Angiograph2

    Directory of Open Access Journals (Sweden)

    Monique Côco

    2007-10-01

    Full Text Available OBJETIVOS: Definir características do exame de autofluorescência, verificando sua utilidade no diagnóstico e acompanhamento de distrofias retinianas. MÉTODOS: Participaram do estudo, 28 pacientes, adultos, divididos igualmente em quatro grupos com diagnósticos de doença de Stargardt, distrofia de Cones, retinose pigmentar e voluntários saudáveis para estabelecimento do padrão de normalidade. Em média foram obtidas nove imagens com o filtro para angiofluoresceinografia para a formação da imagem autofluorescente no Heidelberg Retina Angiograph2. As imagens de cada grupo de pacientes foram analisadas para verificar características comuns. RESULTADOS: As imagens fundoscópicas autofluorescentes dos voluntários do grupo controle mostraram área foveal hipoautofluorescente em relação à retina do pólo posterior. As imagens dos portadores de doença de Stargardt, em geral, apresentaram lesão hipoautofluorescente, correspondendo à área macular. As principais alterações da autofluorescência em pacientes com distrofia de cones foram hipoautofluorescência macular com halo hiperautofluorescente. Nos portadores de retinose pigmentar, foram encontrados pigmentos periféricos causando hipoautofluorescência. Na região macular, hipoautofluorescência ou apenas desorganização do pigmento. CONCLUSÃO: O estudo mostrou a existência de padrões de autofluorescência de fundo nas distrofias de retina que permitem o diagnóstico e melhor interpretação da fisiopatogenia destas doenças.PURPOSE: To define characteristics of the fundus autofluorescence examination, verifying usefulness in the diagnosis and care of hereditary retinal diseases. METHODS: 28 patients, adults, divided equally into four groups with diagnoses of Stargardt macular dystrophy, cone dystrophy, retinitis pigmentosa and healthy volunteers for the establishment of the normality pattern. An average of nine images with the filter for fluorescein angiography was obtained

  6. Thermo-fluid analysis of water cooled research reactors in natural convection; Analise termofluidodinamica de reatores nucleares de pesquisa refrigerados a agua em regime de conveccao natural

    Energy Technology Data Exchange (ETDEWEB)

    Veloso, Maria Auxiliadora Fortini

    2004-07-01

    The STHIRP-1 computer program, which fundamentals are described in this work, uses the principles of the subchannels analysis and has the capacity to simulate, under steady state and transient conditions, the thermal and hydraulic phenomena which occur inside the core of a water-refrigerated research reactor under a natural convection regime. The models and empirical correlations necessary to describe the flow phenomena which can not be described by theoretical relations were selected according to the characteristics of the reactor operation. Although the primary objective is the calculation of research reactors, the formulation used to describe the fluid flow and the thermal conduction in the heater elements is sufficiently generalized to extend the use of the program for applications in power reactors and other thermal systems with the same features represented by the program formulations. To demonstrate the analytical capacity of STHIRP-l, there were made comparisons between the results calculated and measured in the research reactor TRIGA IPR-R1 of CDTN/CNEN. The comparisons indicate that the program reproduces the experimental data with good precision. Nevertheless, in the future there must be used more consistent experimental data to corroborate the validation of the program. (author)

  7. Nuclear reactor overflow line

    Science.gov (United States)

    Severson, Wayne J.

    1976-01-01

    The overflow line for the reactor vessel of a liquid-metal-cooled nuclear reactor includes means for establishing and maintaining a continuous bleed flow of coolant amounting to 5 to 10% of the total coolant flow through the overflow line to prevent thermal shock to the overflow line when the reactor is restarted following a trip. Preferably a tube is disposed concentrically just inside the overflow line extending from a point just inside the reactor vessel to an overflow tank and a suction line is provided opening into the body of liquid metal in the reactor vessel and into the annulus between the overflow line and the inner tube.

  8. Light water reactor safety

    CERN Document Server

    Pershagen, B

    2013-01-01

    This book describes the principles and practices of reactor safety as applied to the design, regulation and operation of light water reactors, combining a historical approach with an up-to-date account of the safety, technology and operating experience of both pressurized water reactors and boiling water reactors. The introductory chapters set out the basic facts upon which the safety of light water reactors depend. The central section is devoted to the methods and results of safety analysis. The accidents at Three Mile Island and Chernobyl are reviewed and their implications for light wate

  9. Nuclear reactor physics

    CERN Document Server

    Stacey, Weston M

    2010-01-01

    Nuclear reactor physics is the core discipline of nuclear engineering. Nuclear reactors now account for a significant portion of the electrical power generated worldwide, and new power reactors with improved fuel cycles are being developed. At the same time, the past few decades have seen an ever-increasing number of industrial, medical, military, and research applications for nuclear reactors. The second edition of this successful comprehensive textbook and reference on basic and advanced nuclear reactor physics has been completely updated, revised and enlarged to include the latest developme

  10. Dose calculation in biological samples in a mixed neutron-gamma field at the TRIGA reactor of the University of Mainz

    DEFF Research Database (Denmark)

    Schmitz, T.; Blaickner, M.; Schütz, C.

    2010-01-01

    FLUKA, a multipurpose Monte Carlo transport code. The pin-diode is augmented by a lithium fluoride foil. This foil converts the neutrons into alpha and tritium particles which are products of the (7)Li(n,α)(3)H-reaction. These particles are detected by the diode and their amount correlates...

  11. Gamma residual radioactivity measurements on rats and mice irradiated in the thermal column of a TRIGA Mark II reactor for BNCT.

    Science.gov (United States)

    Protti, Nicoletta; Manera, Sergio; Prata, Michele; Alloni, Daniele; Ballarini, Francesca; di Tigliole, Andrea Borio; Bortolussi, Silva; Bruschi, Piero; Cagnazzo, Marcella; Garioni, Maria; Postuma, Ian; Reversi, Luca; Salvini, Andrea; Altieri, Saverio

    2014-12-01

    The current Boron Neutron Capture Therapy (BNCT) experiments performed at the University of Pavia, Italy, are focusing on the in vivo irradiations of small animals (rats and mice) in order to evaluate the effectiveness of BNCT in the treatment of diffused lung tumors. After the irradiation, the animals are manipulated, which requires an evaluation of the residual radioactivity induced by neutron activation and the relative radiological risk assessment to guarantee the radiation protection of the workers. The induced activity in the irradiated animals was measured by high-resolution open geometry gamma spectroscopy and compared with values obtained by Monte Carlo simulation. After an irradiation time of 15 min in a position where the in-air thermal flux is about 1.2 × 10(10) cm(-2) s(-1), the specific activity induced in the body of the animal is mainly due to 24Na, 38Cl, 42K, 56Mn, 27Mg and 49Ca; it is approximately 540 Bq g(-1) in the rat and around 2,050 Bq g(-1) in the mouse. During the irradiation, the animal body (except the lung region) is housed in a 95% enriched 6Li shield; the primary radioisotopes produced inside the shield by the neutron irradiation are 3H by the 6Li capture reaction and 18F by the reaction sequence 6Li(n,α)3H → 16O(t,n)18F. The specific activities of these products are 3.3 kBq g(-1) and 880 Bq g(-1), respectively.

  12. Spinning fluids reactor

    Science.gov (United States)

    Miller, Jan D; Hupka, Jan; Aranowski, Robert

    2012-11-20

    A spinning fluids reactor, includes a reactor body (24) having a circular cross-section and a fluid contactor screen (26) within the reactor body (24). The fluid contactor screen (26) having a plurality of apertures and a circular cross-section concentric with the reactor body (24) for a length thus forming an inner volume (28) bound by the fluid contactor screen (26) and an outer volume (30) bound by the reactor body (24) and the fluid contactor screen (26). A primary inlet (20) can be operatively connected to the reactor body (24) and can be configured to produce flow-through first spinning flow of a first fluid within the inner volume (28). A secondary inlet (22) can similarly be operatively connected to the reactor body (24) and can be configured to produce a second flow of a second fluid within the outer volume (30) which is optionally spinning.

  13. The impact of social status inconsistency on cardiovascular risk factors, myocardial infarction and stroke in the EPIC-Heidelberg cohort

    Directory of Open Access Journals (Sweden)

    Hermann Silke

    2011-02-01

    Full Text Available Abstract Background Social inequalities in cardiovascular diseases are well documented. Yet, the relation of social status inconsistency (having different ranks in two or more status indicators like education, occupational position or income and medical conditions of heart or vessels is not clear. Status inconsistency (SI is assumed to be stressful, and the association of psychosocial distress and health is well known. Therefore, we aimed to analyze the relationship between cardiovascular diseases (CVD and status inconsistency. Another target was to assess the influence of behaviour related risk factors on this association. Methods 8960 men and 6070 women, aged 45-65 years, from the EPIC-Heidelberg cohort (European Prospective Investigation into Cancer and Nutrition were included. Socio-economic status was assessed by education/vocational training and occupational position at recruitment. During a median follow-up of 8.7 years, information on CVD was collected. Results Compared to status consistent subjects, men who were in a higher occupational position than could be expected given their educational attainment had a nearly two-fold increased incidence of CVD (Odds Ratio (OR = 1.8, 95% Confidence Interval (CI = 1.5; 2.4, adjusted for age. Smoking behaviour and BMI differed significantly between those who had adequate occupational positions and those who did not. Yet, these lifestyle factors, as opposed to age, did not contribute to the observed differences in CVD. No association of cardiovascular diseases and status inconsistency was found for women or in cases where education exceeded occupational position. Conclusions Status inconsistent men (occupational position > education had a higher risk of cardiovascular diseases than status consistent men. However, harmful behaviour did not explain this relationship.

  14. Phenomena-based Uncertainty Quantification in Predictive Coupled- Physics Reactor Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Adams, Marvin [Texas A & M Univ., College Station, TX (United States)

    2017-06-12

    This project has sought to develop methodologies, tailored to phenomena that govern nuclearreactor behavior, to produce predictions (including uncertainties) for quantities of interest (QOIs) in the simulation of steady-state and transient reactor behavior. Examples of such predictions include, for each QOI, an expected value as well as a distribution around this value and an assessment of how much of the distribution stems from each major source of uncertainty. The project has sought to test its methodologies by comparing against measured experimental outcomes. The main experimental platform has been a 1-MW TRIGA reactor. This is a flexible platform for a wide range of experiments, including steady state with and without temperature feedback, slow transients with and without feedback, and rapid transients with strong feedback. The original plan was for the primary experimental data to come from in-core neutron detectors. We made considerable progress toward this goal but did not get as far along as we had planned. We have designed, developed, installed, and tested vertical guide tubes, each able to accept a detector or stack of detectors that can be moved axially inside the tube, and we have tested several new detector designs. One of these shows considerable promise.

  15. Neutron fluxes in test reactors

    Energy Technology Data Exchange (ETDEWEB)

    Youinou, Gilles Jean-Michel [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-01-01

    Communicate the fact that high-power water-cooled test reactors such as the Advanced Test Reactor (ATR), the High Flux Isotope Reactor (HFIR) or the Jules Horowitz Reactor (JHR) cannot provide fast flux levels as high as sodium-cooled fast test reactors. The memo first presents some basics physics considerations about neutron fluxes in test reactors and then uses ATR, HFIR and JHR as an illustration of the performance of modern high-power water-cooled test reactors.

  16. Major update of Safety Analysis Report for Thai Research Reactor-1/Modification 1

    Energy Technology Data Exchange (ETDEWEB)

    Tippayakul, Chanatip [Thailand Institute of Nuclear Technology, Bangkok (Thailand)

    2013-07-01

    required and work load had to be well managed due to limited number of personnel on the work. The key success factor for this work was to establish international cooperation with other organizations in the research reactor community especially the TRIGA owners. A lot of information exchange including external reviews was conducted through US-DOE and TINT collaboration program on Research Reactor Operation Action Sheet. Other organizations contributed greatly to the success of the work as well by providing consultation and information such as KAERI, JAEA and etc. The updated SAR has been successfully submitted to the regulatory body.

  17. HORIZONTAL BOILING REACTOR SYSTEM

    Science.gov (United States)

    Treshow, M.

    1958-11-18

    Reactors of the boiling water type are described wherein water serves both as the moderator and coolant. The reactor system consists essentially of a horizontal pressure vessel divided into two compartments by a weir, a thermal neutronic reactor core having vertical coolant passages and designed to use water as a moderator-coolant posltioned in one compartment, means for removing live steam from the other compartment and means for conveying feed-water and water from the steam compartment to the reactor compartment. The system further includes auxiliary apparatus to utilize the steam for driving a turbine and returning the condensate to the feed-water inlet of the reactor. The entire system is designed so that the reactor is self-regulating and has self-limiting power and self-limiting pressure features.

  18. Fast Spectrum Reactors

    CERN Document Server

    Todd, Donald; Tsvetkov, Pavel

    2012-01-01

    Fast Spectrum Reactors presents a detailed overview of world-wide technology contributing to the development of fast spectrum reactors. With a unique focus on the capabilities of fast spectrum reactors to address nuclear waste transmutation issues, in addition to the well-known capabilities of breeding new fuel, this volume describes how fast spectrum reactors contribute to the wide application of nuclear power systems to serve the global nuclear renaissance while minimizing nuclear proliferation concerns. Readers will find an introduction to the sustainable development of nuclear energy and the role of fast reactors, in addition to an economic analysis of nuclear reactors. A section devoted to neutronics offers the current trends in nuclear design, such as performance parameters and the optimization of advanced power systems. The latest findings on fuel management, partitioning and transmutation include the physics, efficiency and strategies of transmutation, homogeneous and heterogeneous recycling, in addit...

  19. THERMAL NEUTRONIC REACTOR

    Science.gov (United States)

    Spinrad, B.I.

    1960-01-12

    A novel thermal reactor was designed in which a first reflector formed from a high atomic weight, nonmoderating material is disposed immediately adjacent to the reactor core. A second reflector composed of a moderating material is disposed outwardly of the first reflector. The advantage of this novel reflector arrangement is that the first reflector provides a high slow neutron flux in the second reflector, where irradiation experiments may be conducted with a small effect on reactor reactivity.

  20. Remote Reactor Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Adam [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dazeley, Steve [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dobie, Doug [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Marleau, Peter [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Brennan, Jim [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gerling, Mark [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sumner, Matthew [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sweany, Melinda [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-10-21

    The overall goal of the WATCHMAN project is to experimentally demonstrate the potential of water Cerenkov antineutrino detectors as a tool for remote monitoring of nuclear reactors. In particular, the project seeks to field a large prototype gadolinium-doped, water-based antineutrino detector to demonstrate sensitivity to a power reactor at ~10 kilometer standoff using a kiloton scale detector. The technology under development, when fully realized at large scale, could provide remote near-real-time information about reactor existence and operational status for small operating nuclear reactors out to distances of many hundreds of kilometers.

  1. Development of reactor graphite

    Science.gov (United States)

    Haag, G.; Mindermann, D.; Wilhelmi, G.; Persicke, H.; Ulsamer, W.

    1990-04-01

    The German graphite development programme for High Temperature Reactors has been based on the assumption that reactor graphite for core components with lifetime fluences of up to 4 × 10 22 neutrons per cm 2 (EDN) at 400°C can be manufactured from regular pitch coke. The use of secondary coke and vibrational moulding techniques have allowed production of materials with very small anisotropy, high strength, and high purity which are the most important properties of reactor graphite. A variety of graphite grades has been tested in fast neutron irradiation experiments. The results show that suitable graphites for modern High Temperature Reactors with spherical fuel elements are available.

  2. Oscillatory flow chemical reactors

    National Research Council Canada - National Science Library

    Slavnić Danijela S; Bugarski Branko M; Nikačević Nikola M

    2014-01-01

    .... However, the reactions of interests for the mentioned industry sectors are often slow, thus continuous tubular reactors would be impractically long for flow regimes which provide sufficient heat...

  3. Membrane reactors at Degussa.

    Science.gov (United States)

    Wöltinger, Jens; Karau, Andreas; Leuchtenberger, Wolfgang; Drauz, Karlheinz

    2005-01-01

    The review covers the development of membrane reactor technologies at Degussa for the synthesis of fine chemicals. The operation of fed-batch or continuous biocatalytic processes in the enzyme membrane reactor (EMR) is well established at Degussa. Degussa has experience of running EMRs from laboratory gram scale up to a production scale of several hundreds of tons per year. The transfer of the enzyme membrane reactor from biocatalysis to chemical catalysis in the chemzyme membrane reactor (CMR) is discussed. Various homogeneous catalysts have been investigated in the CMR, and the scope and limitation of this new technique is discussed.

  4. Pressurizing new reactors

    Energy Technology Data Exchange (ETDEWEB)

    Neill, J.S.

    1956-01-30

    The Technical Division was asked recently to consider designs for new reactors that would add 8000 MW capacity to the Savannah River Plant. One modification of the existing SRP design that would enable a higher power rating, and therefore require fewer new reactors, is an increase in the maximum pressure in the D{sub 2}O system. The existing reactors at SRP are designed for a maximum pressure in the gas plenum of only 5 psig. Higher pressures enable higher D{sub 2} temperatures and higher sheath temperatures without local boiling or burnout. The requirements in reactor cooling facilities at any given power level would therefore be reduced by pressurizing.

  5. HOMOGENEOUS NUCLEAR POWER REACTOR

    Science.gov (United States)

    King, L.D.P.

    1959-09-01

    A homogeneous nuclear power reactor utilizing forced circulation of the liquid fuel is described. The reactor does not require fuel handling outside of the reactor vessel during any normal operation including complete shutdown to room temperature, the reactor being selfregulating under extreme operating conditions and controlled by the thermal expansion of the liquid fuel. The liquid fuel utilized is a uranium, phosphoric acid, and water solution which requires no gus exhaust system or independent gas recombining system, thereby eliminating the handling of radioiytic gas.

  6. Effect of lactic acid bacteria probiotic culture for the treatment of Salmonella enterica serovar Heidelberg in neonatal broiler chickens and turkey poults.

    Science.gov (United States)

    Menconi, A; Wolfenden, A D; Shivaramaiah, S; Terraes, J C; Urbano, T; Kuttel, J; Kremer, C; Hargis, B M; Tellez, G

    2011-03-01

    In the present study, a series of experiments was conducted to evaluate the ability of a commercial probiotic culture (FloraMax, IVS-Wynco LLC, Springdale, AR) to reduce Salmonella enterica serovar Heidelberg (SH) in chicks and turkey poults. In experiments 1 and 2, chicks were randomly assigned to treatment groups and then challenged via oral gavage with SH. Chicks were treated 1 h following SH challenge with the probiotic culture via oral gavage. At 24 and 72 h posttreatment, cecal tonsils and ceca were collected for recovery and enumeration of enteric Salmonella Heidelberg, respectively. In experiment 3, day-of-hatch turkeys were randomly assigned to treatment groups and then challenged via oral gavage with SH. Poults were treated 1 h following challenge with the probiotic via oral gavage. At 24 and 72 h post probiotic treatment, cecal tonsils and ceca were collected for recovery and enumeration of enteric SH, respectively. The probiotic culture significantly reduced the incidence of SH in cecal tonsils at both time points in chicks in both experiments (P probiotic 1 h post SH challenge significantly reduced the incidence of SH recovery from cecal tonsils of chicks compared with controls 24 and 72 h following treatment. Similarly, probiotic treatment resulted in significant reductions in the concentrations of SH within the ceca in both experiments. Although similar significant results were observed at both 24 and 72 h in experiment 3, it was clear that poults were more susceptible to SH colonization than chicks. Overall, a Lactobacillus-based probiotic significantly reduced Salmonella enterica serovar Heidelberg in chicks and turkey poults.

  7. Association of Transferable Quinolone Resistance Determinant qnrB19 with Extended-Spectrum β-Lactamases in Salmonella Give and Salmonella Heidelberg in Venezuela

    Directory of Open Access Journals (Sweden)

    Fanny González

    2013-01-01

    Full Text Available Four nontyphoidal Salmonella strains with resistance to extended-spectrum cephalosporins and nonclassical quinolone resistance phenotype were studied. Two S. Give were isolated from pediatric patients with acute gastroenteritis, and two S. Heidelberg were recovered from raw chicken meat. Phenotypic characterization included antimicrobial susceptibility testing and detection of extended-spectrum β-lactamases (ESBLs by the double-disc synergy method. The detection of quinolone resistance-determining regions (QRDR of gyrA, gyrB, and gyrC genes, blaESBLs genes, and plasmid-mediated quinolone resistance (PMQR determinants was carried out by molecular methods. Plasmid analysis included Southern blot and restriction patterns. Transferability of resistance genes was examined by transformation. blaTEM-1 + blaSHV-12 genes were detected in S. Give SG9611 and blaTEM-1 + blaCTX-M-2 in the other three strains: S. Give SG9811, S. Heidelberg SH7511, and SH7911. Regardless of origin and serovars, the qnrB19 gene was detected in the 4 strains studied. All determinants of resistance were localized in plasmids and successfully transferred by transformation. This study highlights the circulation of qnrB19 associated with blaTEM-1, blaSHV-12, and blaCTX-M-2 in S. Give and S. Heidelberg in Venezuela. The recognition of factors associated with increasing resistance and the study of the molecular mechanisms involved can lead to a more focused use of antimicrobial agents.

  8. Comparison of Heidelberg Retina Tomograph with disc-macula distance to disc diameter ratio in diagnosing optic nerve hypoplasia.

    Science.gov (United States)

    Pang, Yi; Frantz, Kelly A

    2016-05-01

    To evaluate whether Heidelberg Retinal Tomograph (HRT) is a valid test for diagnosing congenital optic nerve hypoplasia (CONH) compared to the ratio of the distance between the centre of the optic disc and the centre of the macula and the mean optic disc diameter (DM:DD ratio). Furthermore, to determine the optimal cut-off value of HRT disc area to differentiate a hypoplastic disc from a normal optic disc. A total of 33 subjects with CONH (4-67 years old) and 160 normal subjects (5-65 years old) were recruited and underwent comprehensive eye examinations, fundus photography and HRT. Receiver operating characteristic curves for DM:DD ratio and HRT disc area were constructed based on data from the 46 CONH eyes and 160 control eyes. Mean (±S.D.) HRT disc area was 1.94 (±0.54) mm(2) for the control eyes and 0.84 (±0.35) mm(2) for the CONH eyes (p < 0.0001). The area under the curve (AUC) for DM:DD ratio was 0.83 (95% confidence interval: 0.76-0.90). The AUC for HRT disc area was 0.96 (95% confidence interval: 0.94-0.99). A statistically significant difference was found between AUC for HRT disc area and that for DM:DD ratio (p = 0.0004). The optimal cut-off value for HRT disc area was 1.42 mm(2) with 95% sensitivity and 85% specificity. The optimal cut-off value for DM:DD ratio was 3.20 with 78% sensitivity and 78% specificity. Both HRT and the DM:DD ratio are valid tests to aid diagnosis of CONH. HRT is superior to DM:DD ratio in diagnosing CONH with higher sensitivity and specificity. We suggest the optimal cut-off value for HRT disc area as 1.42 mm(2) in order to discriminate a hypoplastic disc from a normal optic disc. © 2016 The Authors Ophthalmic & Physiological Optics © 2016 The College of Optometrists.

  9. Phase space generation for proton and carbon ion beams for external users’ applications at the Heidelberg Ion Therapy Center

    Directory of Open Access Journals (Sweden)

    Thomas eTessonnier

    2016-01-01

    Full Text Available In the field of radiation therapy, accurate and robust dose calculation is required. For this purpose, precise modeling of the irradiation system and reliable computational platforms are needed. At the Heidelberg Ion Therapy Center (HIT, the beamline has been already modeled in the FLUKA Monte Carlo code. However, this model was kept confidential for disclosure reasons and was not available for any external team. The main goal of this study was to create efficiently phase space (PS files for proton and carbon ion beams, for all energies and foci available at HIT. PS are representing the characteristics of each particle recorded (charge, mass, energy, coordinates, direction cosines, generation at a certain position along the beam path. In order to achieve this goal, keeping a reasonable data size but maintaining the requested accuracy for the calculation, we developed a new approach of beam PS generation with the Monte-Carlo code FLUKA. The generated PS were obtained using an infinitely narrow beam and recording the desired quantities after the last element of the beamline, with a discrimination of primaries or secondaries. In this way, a unique PS can be used for each energy to accommodate the different foci by combining the narrow-beam scenario with a random sampling of its theoretical Gaussian beam in vacuum. PS can also reproduce the different patterns from the delivery system, when properly combined with the beam scanning information. MC simulations using PS have been compared to simulations including the full beamline geometry and have been found in very good agreement for several cases (depth dose distributions, lateral dose profiles, with relative dose differences below 0.5%. This approach has also been compared with measured data of ion beams with different energies and foci, resulting in a very satisfactory agreement. Hence, the proposed approach was able to fulfill the different requirements and has demonstrated its capability for

  10. First experimental-based characterization of oxygen ion beam depth dose distributions at the Heidelberg Ion-Beam Therapy Center

    Science.gov (United States)

    Kurz, C.; Mairani, A.; Parodi, K.

    2012-08-01

    Over the last decades, the application of proton and heavy-ion beams to external beam radiotherapy has rapidly increased. Due to the favourable lateral and depth dose profile, the superposition of narrow ion pencil beams may enable a highly conformal dose delivery to the tumour, with better sparing of the surrounding healthy tissue in comparison to conventional radiation therapy with photons. To fully exploit the promised clinical advantages of ion beams, an accurate planning of the patient treatments is required. The clinical treatment planning system (TPS) at the Heidelberg Ion-Beam Therapy Center (HIT) is based on a fast performing analytical algorithm for dose calculation, relying, among others, on laterally integrated depth dose distributions (DDDs) simulated with the FLUKA Monte Carlo (MC) code. Important input parameters of these simulations need to be derived from a comparison of the simulated DDDs with measurements. In this work, the first measurements of 16O ion DDDs at HIT are presented with a focus on the determined Bragg peak positions and the understanding of factors influencing the shape of the distributions. The measurements are compared to different simulation approaches aiming to reproduce the acquired data at best. A simplified geometrical model is first used to optimize important input parameters, not known a priori, in the simulations. This method is then compared to a more realistic, but also more time-consuming simulation approach better accounting for the experimental set-up and the measuring process. The results of this work contributed to a pre-clinical oxygen ion beam database, which is currently used by a research TPS for corresponding radio-biological cell experiments. A future extension to a clinical database used by the clinical TPS at HIT is foreseen. As a side effect, the performed investigations showed that the typical water equivalent calibration approach of experimental data acquired with water column systems leads to slight

  11. Heidelberg Neuro-Music Therapy Restores Attention-Related Activity in the Angular Gyrus in Chronic Tinnitus Patients

    Science.gov (United States)

    Krick, Christoph M.; Argstatter, Heike; Grapp, Miriam; Plinkert, Peter K.; Reith, Wolfgang

    2017-01-01

    Background: Tinnitus is the perception of a phantom sound without external acoustic stimulation. Recent tinnitus research suggests a relationship between attention processes and tinnitus-related distress. It has been found that too much focus on tinnitus comes at the expense of the visual domain. The angular gyrus (AG) seems to play a crucial role in switching attention to the most salient stimulus. This study aims to evaluate the involvement of the AG during visual attention tasks in tinnitus sufferers treated with Heidelberg Neuro-Music Therapy (HNMT), an intervention that has been shown to reduce tinnitus-related distress. Methods: Thirty-three patients with chronic tinnitus, 45 patients with recent-onset tinnitus, and 35 healthy controls were tested. A fraction of these (21/21/22) were treated with the “compact” version of the HNMT lasting 1 week with intense treatments, while non-treated participants were included as passive controls. Visual attention was evaluated during functional Magnet-Resonance Imaging (fMRI) by a visual Continous Performance Task (CPT) using letter-based alarm cues (“O” and “X”) appearing in a sequence of neutral letters, “A” through “H.” Participants were instructed to respond via button press only if the letter “O” was followed by the letter “X” (GO condition), but not to respond if a neutral letter appeared instead (NOGO condition). All participants underwent two fMRI sessions, before and after a 1-week study period. Results: The CPT results revealed a relationship between error rates and tinnitus duration at baseline whereby the occurrence of erroneous “GO omissions” and the reaction time increased with tinnitus duration. Patients with chronic tinnitus who were treated with HNMT had decreasing error rates (fewer GO omissions) compared to treated recent-onset patients. fMRI analyses confirmed greater activation of the AG during CPT in chronic patients after HNMT treatment compared to treated recent

  12. Heidelberg Neuro-Music Therapy Restores Attention-Related Activity in the Angular Gyrus in Chronic Tinnitus Patients

    Directory of Open Access Journals (Sweden)

    Christoph M. Krick

    2017-07-01

    Full Text Available Background: Tinnitus is the perception of a phantom sound without external acoustic stimulation. Recent tinnitus research suggests a relationship between attention processes and tinnitus-related distress. It has been found that too much focus on tinnitus comes at the expense of the visual domain. The angular gyrus (AG seems to play a crucial role in switching attention to the most salient stimulus. This study aims to evaluate the involvement of the AG during visual attention tasks in tinnitus sufferers treated with Heidelberg Neuro-Music Therapy (HNMT, an intervention that has been shown to reduce tinnitus-related distress.Methods: Thirty-three patients with chronic tinnitus, 45 patients with recent-onset tinnitus, and 35 healthy controls were tested. A fraction of these (21/21/22 were treated with the “compact” version of the HNMT lasting 1 week with intense treatments, while non-treated participants were included as passive controls. Visual attention was evaluated during functional Magnet-Resonance Imaging (fMRI by a visual Continous Performance Task (CPT using letter-based alarm cues (“O” and “X” appearing in a sequence of neutral letters, “A” through “H.” Participants were instructed to respond via button press only if the letter “O” was followed by the letter “X” (GO condition, but not to respond if a neutral letter appeared instead (NOGO condition. All participants underwent two fMRI sessions, before and after a 1-week study period.Results: The CPT results revealed a relationship between error rates and tinnitus duration at baseline whereby the occurrence of erroneous “GO omissions” and the reaction time increased with tinnitus duration. Patients with chronic tinnitus who were treated with HNMT had decreasing error rates (fewer GO omissions compared to treated recent-onset patients. fMRI analyses confirmed greater activation of the AG during CPT in chronic patients after HNMT treatment compared to treated

  13. Helium ions at the heidelberg ion beam therapy center: comparisons between FLUKA Monte Carlo code predictions and dosimetric measurements

    Science.gov (United States)

    Tessonnier, T.; Mairani, A.; Brons, S.; Sala, P.; Cerutti, F.; Ferrari, A.; Haberer, T.; Debus, J.; Parodi, K.

    2017-08-01

    In the field of particle therapy helium ion beams could offer an alternative for radiotherapy treatments, owing to their interesting physical and biological properties intermediate between protons and carbon ions. We present in this work the comparisons and validations of the Monte Carlo FLUKA code against in-depth dosimetric measurements acquired at the Heidelberg Ion Beam Therapy Center (HIT). Depth dose distributions in water with and without ripple filter, lateral profiles at different depths in water and a spread-out Bragg peak were investigated. After experimentally-driven tuning of the less known initial beam characteristics in vacuum (beam lateral size and momentum spread) and simulation parameters (water ionization potential), comparisons of depth dose distributions were performed between simulations and measurements, which showed overall good agreement with range differences below 0.1 mm and dose-weighted average dose-differences below 2.3% throughout the entire energy range. Comparisons of lateral dose profiles showed differences in full-width-half-maximum lower than 0.7 mm. Measurements of the spread-out Bragg peak indicated differences with simulations below 1% in the high dose regions and 3% in all other regions, with a range difference less than 0.5 mm. Despite the promising results, some discrepancies between simulations and measurements were observed, particularly at high energies. These differences were attributed to an underestimation of dose contributions from secondary particles at large angles, as seen in a triple Gaussian parametrization of the lateral profiles along the depth. However, the results allowed us to validate FLUKA simulations against measurements, confirming its suitability for 4He ion beam modeling in preparation of clinical establishment at HIT. Future activities building on this work will include treatment plan comparisons using validated biological models between proton and helium ions, either within a Monte Carlo

  14. Heidelberg Neuro-Music Therapy Restores Attention-Related Activity in the Angular Gyrus in Chronic Tinnitus Patients.

    Science.gov (United States)

    Krick, Christoph M; Argstatter, Heike; Grapp, Miriam; Plinkert, Peter K; Reith, Wolfgang

    2017-01-01

    Background: Tinnitus is the perception of a phantom sound without external acoustic stimulation. Recent tinnitus research suggests a relationship between attention processes and tinnitus-related distress. It has been found that too much focus on tinnitus comes at the expense of the visual domain. The angular gyrus (AG) seems to play a crucial role in switching attention to the most salient stimulus. This study aims to evaluate the involvement of the AG during visual attention tasks in tinnitus sufferers treated with Heidelberg Neuro-Music Therapy (HNMT), an intervention that has been shown to reduce tinnitus-related distress. Methods: Thirty-three patients with chronic tinnitus, 45 patients with recent-onset tinnitus, and 35 healthy controls were tested. A fraction of these (21/21/22) were treated with the "compact" version of the HNMT lasting 1 week with intense treatments, while non-treated participants were included as passive controls. Visual attention was evaluated during functional Magnet-Resonance Imaging (fMRI) by a visual Continous Performance Task (CPT) using letter-based alarm cues ("O" and "X") appearing in a sequence of neutral letters, "A" through "H." Participants were instructed to respond via button press only if the letter "O" was followed by the letter "X" (GO condition), but not to respond if a neutral letter appeared instead (NOGO condition). All participants underwent two fMRI sessions, before and after a 1-week study period. Results: The CPT results revealed a relationship between error rates and tinnitus duration at baseline whereby the occurrence of erroneous "GO omissions" and the reaction time increased with tinnitus duration. Patients with chronic tinnitus who were treated with HNMT had decreasing error rates (fewer GO omissions) compared to treated recent-onset patients. fMRI analyses confirmed greater activation of the AG during CPT in chronic patients after HNMT treatment compared to treated recent-onset patients. Conclusions: Our

  15. Comparison of methods for quantitating Salmonella enterica Typhimurium and Heidelberg strain attachment to reusable plastic shipping container coupons and preliminary assessment of sanitizer efficacy.

    Science.gov (United States)

    Shi, Zhaohao; Baker, Christopher A; Lee, Sang In; Park, Si Hong; Kim, Sun Ae; Ricke, Steven C

    2016-09-01

    Salmonella serovars, one of the leading contributors to foodborne illness and are especially problematic for foods that are not cooked before consumption, such as fresh produce. The shipping containers that are used to transport and store fresh produce may play a role in cross contamination and subsequent illnesses. However, methods for quantitatively attached cells are somewhat variable. The overall goal of this study was to compare conventional plating with molecular methods for quantitating attached representative strains for Salmonella Typhimurium and Heidelberg on reusable plastic containers (RPC) coupons, respectively. We attached Salmonella enterica serovar Typhimurium ATCC 14028 and serovar Heidelberg SL486 (parent and an antibiotic resistant marker strain) to plastic coupons (2.54 cm(2)) derived from previously used shipping containers by growing for 72 h in tryptic soy broth. The impact of the concentration of sanitizer on log reductions between unsanitized and sanitized coupons was evaluated by exposing attached S. Typhimurium cells to 200 ppm and 200,000 ppm sodium hypochlorite (NaClO). Differences in sanitizer effectiveness between serovars were also evaluated with attached S. Typhimurium compared to attached S. Heidelberg populations after being exposed to 200 ppm peracetic acid (PAA). Treatment with NaClO caused an average of 2.73 ± 0.23 log CFU of S. Typhimurium per coupon removed with treatment at 200 ppm while 3.36 ± 0.54 log CFU were removed at 200,000 ppm. Treatment with PAA caused an average of 2.62 ± 0.15 log CFU removed for S. Typhimurium and 1.41 ± 0.17 log CFU for S. Heidelberg (parent) and 1.61 ± 0.08 log CFU (marker). Lastly, scanning electron microscopy (SEM) was used to visualize cell attachment and coupon surface topography. SEM images showed that remaining attached cell populations were visible even after sanitizer application. Conventional plating and qPCR yielded similar levels of enumerated bacterial populations

  16. Die Ulmer Studie und die Konsequenzen für die Beratungspraxis des Studiendekanats der Medizinischen Fakultät Heidelberg [The Ulm Study and the implications for the advisory services of the Dean of Studies at the Medical Faculty of Heidelberg

    Directory of Open Access Journals (Sweden)

    Nützenadel, Susanne

    2012-04-01

    Full Text Available [english] Increasing the flexibility of medical degree courses as well as individual advice and curriculum planning are essential needs of pregnant students and student parents. The results of the Ulm Study gave the academic advisers in the Dean of Studies’ office in Heidelberg a large number of suggestions on how to offer sensitive, competent and needs-based advice to this target group. Comprehensive reflection on many years of experience in giving advice and recent survey results leads to a series of concrete measures which will contribute to more family-friendliness in Heidelberg’s medical school.[german] Eine Flexibilisierung des Studiums sowie eine individuelle Beratung und Curriculumsplanung sind grundlegende Bedürfnisse von schwangeren Studierenden und studentischen Eltern. Die Ergebnisse der Ulmer Studie haben den Fachstudienberatern im Studiendekanat Heidelberg vielfache Anregungen zu einer einfühlsamen, kompetenten und bedürfnisorientierten Beratung dieser Zielgruppe gegeben. Eine umfassende Reflexion über langjährige Erfahrungen aus der Beratungspraxis und über aktuelle Umfrageergebnisse führt zu einer Reihe von konkreten Maßnahmen, die künftig zu einer erhöhten Familienfreundlichkeit im Medizinstudium in Heidelberg beitragen.

  17. Technical specifications, Hanford production reactors

    Energy Technology Data Exchange (ETDEWEB)

    Gilbert, W.D. [comp.

    1962-06-25

    These technical specifications are applicable to the eight operating production reactor facilities, B, C, D, DR, F, H, KE, and KW. Covered are operating and performance restrictions and administrative procedures. Areas covered by the operating and performance restrictions are reactivity, reactor control and safety elements, power level, temperature and heat flux, reactor fuel loadings, reactor coolant systems, reactor confinement, test facilities, code compliance, and reactor scram set points. Administrative procedures include process control procedures, training programs, audits and inspections, and reports and records.

  18. Reactor Materials Research

    Energy Technology Data Exchange (ETDEWEB)

    Van Walle, E

    2001-04-01

    The activities of the Reactor Materials Research Department of the Belgian Nuclear Research Centre SCK-CEN in 2000 are summarised. The programmes within the department are focussed on studies concerning (1) fusion, in particular mechanical testing; (2) Irradiation Assisted Stress Corrosion Cracking (IASCC); (3) nuclear fuel; and (4) Reactor Pressure Vessel Steel (RPVS)

  19. Space Nuclear Reactor Engineering

    Energy Technology Data Exchange (ETDEWEB)

    Poston, David Irvin [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-06

    We needed to find a space reactor concept that could be attractive to NASA for flight and proven with a rapid turnaround, low-cost nuclear test. Heat-pipe-cooled reactors coupled to Stirling engines long identified as the easiest path to near-term, low-cost concept.

  20. REFLECTOR FOR NEUTRONIC REACTORS

    Science.gov (United States)

    Fraas, A.P.

    1963-08-01

    A reflector for nuclear reactors that comprises an assembly of closely packed graphite rods disposed with their major axes substantially perpendicular to the interface between the reactor core and the reflector is described. Each graphite rod is round in transverse cross section at (at least) its interface end and is provided, at that end, with a coaxial, inwardly tapering hole. (AEC)

  1. Mirror reactor surface study

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, A. L.; Damm, C. C.; Futch, A. H.; Hiskes, J. R.; Meisenheimer, R. G.; Moir, R. W.; Simonen, T. C.; Stallard, B. W.; Taylor, C. E.

    1976-09-01

    A general survey is presented of surface-related phenomena associated with the following mirror reactor elements: plasma first wall, ion sources, neutral beams, director converters, vacuum systems, and plasma diagnostics. A discussion of surface phenomena in possible abnormal reactor operation is included. Several studies which appear to merit immediate attention and which are essential to the development of mirror reactors are abstracted from the list of recommended areas for surface work. The appendix contains a discussion of the fundamentals of particle/surface interactions. The interactions surveyed are backscattering, thermal desorption, sputtering, diffusion, particle ranges in solids, and surface spectroscopic methods. A bibliography lists references in a number of categories pertinent to mirror reactors. Several complete published and unpublished reports on surface aspects of current mirror plasma experiments and reactor developments are also included.

  2. Nuclear reactor design

    CERN Document Server

    2014-01-01

    This book focuses on core design and methods for design and analysis. It is based on advances made in nuclear power utilization and computational methods over the past 40 years, covering core design of boiling water reactors and pressurized water reactors, as well as fast reactors and high-temperature gas-cooled reactors. The objectives of this book are to help graduate and advanced undergraduate students to understand core design and analysis, and to serve as a background reference for engineers actively working in light water reactors. Methodologies for core design and analysis, together with physical descriptions, are emphasized. The book also covers coupled thermal hydraulic core calculations, plant dynamics, and safety analysis, allowing readers to understand core design in relation to plant control and safety.

  3. Status of French reactors

    Energy Technology Data Exchange (ETDEWEB)

    Ballagny, A. [Commissariat a l`Energie Atomique, Saclay (France)

    1997-08-01

    The status of French reactors is reviewed. The ORPHEE and RHF reactors can not be operated with a LEU fuel which would be limited to 4.8 g U/cm{sup 3}. The OSIRIS reactor has already been converted to LEU. It will use U{sub 3}Si{sub 2} as soon as its present stock of UO{sub 2} fuel is used up, at the end of 1994. The decision to close down the SILOE reactor in the near future is not propitious for the start of a conversion process. The REX 2000 reactor, which is expected to be commissioned in 2005, will use LEU (except if the fast neutrons core option is selected). Concerning the end of the HEU fuel cycle, the best option is reprocessing followed by conversion of the reprocessed uranium to LEU.

  4. Development of multiplex PCR assay for simultaneous detection of Salmonella genus, Salmonella subspecies I, Salm. Enteritidis, Salm. Heidelberg and Salm. Typhimurium.

    Science.gov (United States)

    Park, S H; Ricke, S C

    2015-01-01

    The aim of this research was to develop multiplex PCR assay that could simultaneously detect Salmonella genus, Salmonella subsp. I, Salm. Enteritidis, Heidelberg and Typhimurium because these Salmonella serovars are the most common isolates associated with poultry products. Five primers were utilized to establish multiplex PCR and applied to Salmonella isolates from chickens and farm environments. These isolates were identified as Salmonella subsp. I and 16 of 66 isolates were classified as Salm. Enteritidis, while Heidelberg or Typhimurium was not detected. We also spiked three Salmonella strains on chicken breast meat to evaluate the specificity and sensitivity of multiplex PCR as well as qPCR to optimize quantification of Salmonella in these samples. The optimized multiplex PCR and qPCR could detect approx. 2·2 CFU of Salmonella per gram after 18 h enrichment. The multiplex PCR and qPCR would provide rapid and consistent results. Also, these techniques would be useful for the detection and quantification of Salmonella in contaminated poultry, foods and environmental samples. The strategy for the rapid detection of Salmonella serovars in poultry is needed to further reduce the incidence of salmonellosis in humans. The optimized multiplex PCR will be useful to detect prevalent Salmonella serovars in poultry products. © 2014 The Society for Applied Microbiology.

  5. Integration von Schulungsveranstaltungen der Bibliothek ins Curriculum - am Beispiel der Fakultät für Klinische Medizin Mannheim der Universität Heidelberg

    Directory of Open Access Journals (Sweden)

    Semmler-Schmetz, Martina

    2005-09-01

    Full Text Available In the winter semester 2004/05 the Faculty for Clinical Medicine Mannheim of Heidelberg University implemented the new Querschnittsschein "Epidemiology, medical biometrics and medical informatics" and integrated the first library instructional classes into its medical curriculum. In order to meet the new requirements the medical library established an instructional team that designed tailor-made courses for the student target group and put into practice the experiences gathered both in workshops (such as the continuing education course "Teaching Library" offered by the BIB in May 2004 and from the relevant literature. With a maximum participation of library staff almost all of the first clinical semster medical students finished three different instructional modules of the beginners and intermediate skill levels. Resonance to these courses was ascertained by evaluation forms completed by the participants immediately after the classes. The feedback was predominantly positive, and the members of the instructional team unanimously regarded the experiences made as new and inspiring. As a further development of the orientation and instruction classes integrated in the curriculum the medical library intends to participate in the navigation system LOTSE of the Universitäts- und Landesbibliothek Münster starting in the academic year 2005/06. Moreover, by then, one of the aforementioned classes is planned to be offered on the e-Learning platform ATHENA of Heidelberg University.

  6. ‘And thou shalt teach these words diligently …’: Remarks on the purpose of the Heidelberg Catechism regarding its teaching nature

    Directory of Open Access Journals (Sweden)

    Victor E. d’Assonville

    2013-10-01

    Full Text Available As is well-known, the Heidelberg Catechism (HC has not only become one of the most important confessions of faith since the 16th century, it has also been a significant aid to catechesis, even to this day. In this contribution, the catechetical purpose of the HC is examined with regard to its origins. Three texts that accompanied the first editions of the Heidelberg Catechism in 1563 are scrutinised: two prefaces by Frederick III, and the Palatine Church Order. The youth as well as the rest of the congregation, should be guided in the fear of the Lord so that they may attain sufficient knowledge of and a living faith in the Lord of Scripture. The HC does not merely have theoretical purposes. Its contents and structure were carefully composed to teach the most significant parts of Christian faith in a short and simple way on a regular and frequent basis. This teaching is not only the responsibility of the church or minister, but also of the parents and the teachers. In this comprehensive approach to instruction in the Christian faith, there is no contradiction between Scripture as the Word of God and the HC. Hence, teaching and preaching the HC does justice to the command that the gospel should be proclaimed, preached, taught, learned and understood.

  7. Nuclear reactor control column

    Science.gov (United States)

    Bachovchin, Dennis M.

    1982-01-01

    The nuclear reactor control column comprises a column disposed within the nuclear reactor core having a variable cross-section hollow channel and containing balls whose vertical location is determined by the flow of the reactor coolant through the column. The control column is divided into three basic sections wherein each of the sections has a different cross-sectional area. The uppermost section of the control column has the greatest cross-sectional area, the intermediate section of the control column has the smallest cross-sectional area, and the lowermost section of the control column has the intermediate cross-sectional area. In this manner, the area of the uppermost section can be established such that when the reactor coolant is flowing under normal conditions therethrough, the absorber balls will be lifted and suspended in a fluidized bed manner in the upper section. However, when the reactor coolant flow falls below a predetermined value, the absorber balls will fall through the intermediate section and into the lowermost section, thereby reducing the reactivity of the reactor core and shutting down the reactor.

  8. Reactor Safety Research Programs

    Energy Technology Data Exchange (ETDEWEB)

    Edler, S. K.

    1981-07-01

    This document summarizes the work performed by Pacific Northwest Laboratory (PNL) from January 1 through March 31, 1981, for the Division of Reactor Safety Research within the U.S. Nuclear Regulatory Commission (NRC). Evaluations of nondestructive examination (NDE) techniques and instrumentation are reported; areas of investigation include demonstrating the feasibility of determining the strength of structural graphite, evaluating the feasibility of detecting and analyzing flaw growth in reactor pressure boundary systems, examining NDE reliability and probabilistic fracture mechanics, and assessing the integrity of pressurized water reactor (PWR) steam generator tubes where service-induced degradation has been indicated. Experimental data and analytical models are being provided to aid in decision-making regarding pipeto- pipe impacts following postulated breaks in high-energy fluid system piping. Core thermal models are being developed to provide better digital codes to compute the behavior of full-scale reactor systems under postulated accident conditions. Fuel assemblies and analytical support are being provided for experimental programs at other facilities. These programs include loss-ofcoolant accident (LOCA) simulation tests at the NRU reactor, Chalk River, Canada; fuel rod deformation, severe fuel damage, and postaccident coolability tests for the ESSOR reactor Super Sara Test Program, Ispra, Italy; the instrumented fuel assembly irradiation program at Halden, Norway; and experimental programs at the Power Burst Facility, Idaho National Engineering Laboratory (INEL). These programs will provide data for computer modeling of reactor system and fuel performance during various abnormal operating conditions.

  9. Reactor power monitoring device

    Energy Technology Data Exchange (ETDEWEB)

    Oda, Naotaka; Igawa, Shinji; Kitazono, Hideaki

    1998-02-13

    The present invention provides a reactor power monitoring device capable of ensuring circumstance resistance, high reliability and high speed transmission even if an APRM is disposed in a reactor building (R/B). Namely, signal processing sections (APRM) for transmitting data to a central control chamber are distributed in the reactor building at an area at the lowest temperature among areas where the temperature control in an emergency state is regulated, and a transmission processing section (APRM-I/F) for transmitting data to the other systems is disposed to the central control chamber. An LPRM signal transmission processing section is constituted such that LPRM signals can be transmitted at a high speed by DMA. Set values relevant to reactor tripping (neutron flux high, thermal output high and sudden reduction of a reactor core flow rate) are stored in the APRM-I/F, and reactor tripping calculation is conducted in the APRM-I/F. With such procedure, a reactor power monitoring device having enhanced control function can be attained. (N.H.)

  10. Nuclear reactor reflector

    Science.gov (United States)

    Hopkins, R.J.; Land, J.T.; Misvel, M.C.

    1994-06-07

    A nuclear reactor reflector is disclosed that comprises a stack of reflector blocks with vertical water flow passages to cool the reflector. The interface between blocks is opposite support points for reactor fuel rods. Water flows between the reflector and the reactor barrel from passages in a bottom block. The top block contains a flange to limit this flow and the flange has a slot to receive an alignment pin that is welded to the barrel. The pin is held in the slot by two removable shims. Alignment bars extend the length of the stack in slots machined in each block when the stack is assembled. 12 figs.

  11. Fast Breeder Reactor studies

    Energy Technology Data Exchange (ETDEWEB)

    Till, C.E.; Chang, Y.I.; Kittel, J.H.; Fauske, H.K.; Lineberry, M.J.; Stevenson, M.G.; Amundson, P.I.; Dance, K.D.

    1980-07-01

    This report is a compilation of Fast Breeder Reactor (FBR) resource documents prepared to provide the technical basis for the US contribution to the International Nuclear Fuel Cycle Evaluation. The eight separate parts deal with the alternative fast breeder reactor fuel cycles in terms of energy demand, resource base, technical potential and current status, safety, proliferation resistance, deployment, and nuclear safeguards. An Annex compares the cost of decommissioning light-water and fast breeder reactors. Separate abstracts are included for each of the parts.

  12. Reactor flux calculations

    Energy Technology Data Exchange (ETDEWEB)

    Lhuillier, D. [Commissariat à l' Énergie Atomique et aux Énergies Alternatives, Centre de Saclay, IRFU/SPhN, 91191 Gif-sur-Yvette (France)

    2013-02-15

    The status of the prediction of reactor anti-neutrino spectra is presented. The most accurate method is still the conversion of total β spectra of fissionning isotopes as measured at research reactors. Recent re-evaluations of the conversion process led to an increased predicted flux by few percent and were at the origin of the so-called reactor anomaly. The up to date predictions are presented with their main sources of error. Perspectives are given on the complementary ab-initio predictions and upcoming experimental cross-checks of the predicted spectrum shape.

  13. NEUTRONIC REACTOR CONTROL

    Science.gov (United States)

    Metcalf, H.E.

    1958-10-14

    Methods of controlling reactors are presented. Specifically, a plurality of neutron absorber members are adjustably disposed in the reactor core at different distances from the center thereof. The absorber members extend into the core from opposite faces thereof and are operated by motive means coupled in a manner to simultaneously withdraw at least one of the absorber members while inserting one of the other absorber members. This feature effects fine control of the neutron reproduction ratio by varying the total volume of the reactor effective in developing the neutronic reaction.

  14. Nuclear reactor reflector

    Science.gov (United States)

    Hopkins, Ronald J.; Land, John T.; Misvel, Michael C.

    1994-01-01

    A nuclear reactor reflector is disclosed that comprises a stack of reflector blocks with vertical water flow passages to cool the reflector. The interface between blocks is opposite support points for reactor fuel rods. Water flows between the reflector and the reactor barrel from passages in a bottom block. The top block contains a flange to limit this flow and the flange has a slot to receive an alignment pin that is welded to the barrel. The pin is held in the slot by two removable shims. Alignment bars extend the length of the stack in slots machined in each block when the stack is assembled.

  15. Microfluidic electrochemical reactors

    Science.gov (United States)

    Nuzzo, Ralph G [Champaign, IL; Mitrovski, Svetlana M [Urbana, IL

    2011-03-22

    A microfluidic electrochemical reactor includes an electrode and one or more microfluidic channels on the electrode, where the microfluidic channels are covered with a membrane containing a gas permeable polymer. The distance between the electrode and the membrane is less than 500 micrometers. The microfluidic electrochemical reactor can provide for increased reaction rates in electrochemical reactions using a gaseous reactant, as compared to conventional electrochemical cells. Microfluidic electrochemical reactors can be incorporated into devices for applications such as fuel cells, electrochemical analysis, microfluidic actuation, pH gradient formation.

  16. New reactor type proposed

    CERN Multimedia

    2003-01-01

    "Russian scientists at the Research Institute of Nuclear Power Engineering in Moscow are hoping to develop a new reactor that will use lead and bismuth as fuel instead of uranium and plutonium" (1/2 page).

  17. Operational tests and irradiation programming proposal for the industrial production of {sup 131} I in the TRIGA Mark III reactor of the Nuclear Centre (ININ); Pruebas operacionales y propuesta de programacion de irradiacion para la produccion industrial de {sup 131} I en el reactor TRIGA Mark III del Centro Nuclear (ININ)

    Energy Technology Data Exchange (ETDEWEB)

    Alanis M, J.; Reyes J, J.L.; Ruiz C, M.A. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2003-07-01

    In the National Institute of Nuclear Research it was recently finished the project for the production of I-131 at industrial level, the one which can divide basically in: (a) Preparation of the raw materials (TeO{sub 2}), (b) Sintering, (c) Neutron irradiation and (d) Separation of the I-131. With the end of starting the industrial production of this process, in this work it is presented the operational tests and an irradiation proposal of the TeO{sub 2} to obtain quantities of I-131 that cover, if not totally, partially the national market. For this, they were carried out irradiation tests of 6 samples to different flows of neutrons. The result of these tests settles down that irradiating a mass of 240 g TeO{sub 2} to a neutron flow of 6.53 x 10{sup 12} n/cm{sup 2}s in 4 cycles of 30 h per week approximately 2.54 Ci/week of I-131 distilled are obtained, which represents 35% of the demand of the Plant of Radioisotopes production of the ININ. (Author)

  18. Department of Reactor Technology

    DEFF Research Database (Denmark)

    Risø National Laboratory, Roskilde

    The general development of the Department of Reactor Technology at Risø during 1981 is presented, and the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included.......The general development of the Department of Reactor Technology at Risø during 1981 is presented, and the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included....

  19. Natural convection reactor

    Energy Technology Data Exchange (ETDEWEB)

    Babcock, D.F.; Bernath, L.; Menegus, R.L.; Ring, H.F.

    1956-05-01

    A previous report described the conceptual design of a plutonium producing reactor that may be characterized as follows: Power output (2000 MW); cooling - (natural convection of light water through the reactor, up through a draft tube to an evaporative cooling pond, then back to the reactor, and fuel (400 to 500 tons of uranium enriched to 1.2% U-235). Because this reactor would be cooled by the natural convection of light water, it is believed that the construction costs would be significantly less than for a Savannah or Hanford type reactor. Such expensive items as water treatment and water pumping facilities would be eliminated entirely. The inventory of 500 tons of slightly enriched uranium, however, is an unattractive feature. It represents not only a large dollar investment but also makes the reactor less attractive for construction during periods of national emergency because of the almost certain scarcity of even slightly enriched uranium at that time. The Atomic Energy Commission asked that the design be reviewed with the objective of reducing the inventory of uranium, The results of this review are given in this report.

  20. Imported poultry meat as a source of extended-spectrum cephalosporin-resistant CMY-2-producing Salmonella Heidelberg and Salmonella Minnesota in the European Union, 2014-2015.

    Science.gov (United States)

    Campos, Joana; Mourão, Joana; Silveira, Leonor; Saraiva, Margarida; Correia, Cristina Belo; Maçãs, Ana Paula; Peixe, Luísa; Antunes, Patrícia

    2018-01-01

    Extended-spectrum cephalosporin (ESC)-resistant Salmonella have been described at a low level in the EU, nevertheless the increasing importation of poultry meat could be an important source of epidemic strains carrying ESC resistance genes. This study evaluated ESC resistance and its genetic platform among Salmonella isolates from poultry meat products imported into Portugal as well as clonal relatedness of the isolates. All Salmonella isolates recovered from samples of fresh meat destined for import into the EU in the scope of Portuguese official border control (2014-2015) were studied. Antibiotic susceptibility and β-lactamase production was determined by disk diffusion/microdilution. Molecular studies included detection of genes encoding acquired AmpC and extended-spectrum β-lactamases, plasmid-mediated quinolone resistance and other antibiotic resistance genes by PCR/sequencing, and clonality by MLST and XbaI-PFGE. Plasmid characterisation was assessed by conjugation assays, replicon typing (PCR-PBRT/pMLST) and hybridisation experiments (I-CeuI/S1-PFGE nuclease). Isolates belonged to Salmonella Heidelberg (n = 6; ST15/eBG26) and Salmonella Minnesota (n = 1; ST548/eBG77) and presented multidrug-resistant profiles, including to ESCs and/or fluoroquinolones. All but one carried blaCMY-2, located on two epidemic plasmids, IncA/C (ST2, n = 5) or transferable IncI1 (ST12, n = 1). Salmonella Heidelberg was associated with five PFGE types, including one similar to an American epidemic clone. This study reveals imported poultry products as a source of uncommon and/or invasive ESC-resistant Salmonella strains in the EU. The increase of clinically relevant poultry-related serotypes in Europe must be taken into account in the current monitoring of antibiotic resistance trends and in re-evaluation of food regulations. Copyright © 2017 Elsevier B.V. and International Society of Chemotherapy. All rights reserved.

  1. Assessment of Early Toxicity and Response in Patients Treated With Proton and Carbon Ion Therapy at the Heidelberg Ion Therapy Center Using the Raster Scanning Technique

    Energy Technology Data Exchange (ETDEWEB)

    Rieken, Stefan; Habermehl, Daniel; Nikoghosyan, Anna; Jensen, Alexandra [Department of Radiation Oncology, University Hospital of Heidelberg, Heidelberg (Germany); Haberer, Thomas [Heidelberg Ion Therapy Center, Heidelberg (Germany); Jaekel, Oliver [Heidelberg Ion Therapy Center, Heidelberg (Germany); Department of Medical Physics, German Cancer Research Center (DKFZ), Heidelberg (Germany); Muenter, Marc W.; Welzel, Thomas; Debus, Juergen [Department of Radiation Oncology, University Hospital of Heidelberg, Heidelberg (Germany); Combs, Stephanie E., E-mail: Stephanie.Combs@med.uni-hedielberg.de [Department of Radiation Oncology, University Hospital of Heidelberg, Heidelberg (Germany)

    2011-12-01

    Puropose: To asses early toxicity and response in 118 patients treated with scanned ion beams to validate the safety of intensity-controlled raster scanning at the Heidelberg Ion Therapy Center. Patients and Methods: Between November 2009 and June 2010, we treated 118 patients with proton and carbon ion radiotherapy (RT) using active beam delivery. The main indications included skull base chordomas and chondrosarcomas, salivary gland tumors, and gliomas. We evaluated early toxicity within 6 weeks after RT and the initial clinical and radiologic response for quality assurance in our new facility. Results: In all 118 patients, few side effects were observed, in particular, no high numbers of severe acute toxicity were found. In general, the patients treated with particle therapy alone showed only a few single side effects, mainly Radiation Therapy Oncology Group/Common Terminology Criteria grade 1. The most frequent side effects and cumulative incidence of single side effects were observed in the head-and-neck patients treated with particle therapy as a boost and photon intensity-modulated RT. The toxicities included common radiation-attributed reactions known from photon RT, including mucositis, dysphagia, and skin erythema. The most predominant imaging responses were observed in patients with high-grade gliomas and those with salivary gland tumors. For skull base tumors, imaging showed a stable tumor outline in most patients. Thirteen patients showed improvement of pre-existing clinical symptoms. Conclusions: Side effects related to particle treatment were rare, and the overall tolerability of the treatment was shown. The initial response was promising. The data have confirmed the safe delivery of carbon ions and protons at the newly opened Heidelberg facility.

  2. Reactor Safety Planning for Prometheus Project, for Naval Reactors Information

    Energy Technology Data Exchange (ETDEWEB)

    P. Delmolino

    2005-05-06

    The purpose of this letter is to submit to Naval Reactors the initial plan for the Prometheus project Reactor Safety work. The Prometheus project is currently developing plans for cold physics experiments and reactor prototype tests. These tests and facilities may require safety analysis and siting support. In addition to the ground facilities, the flight reactor units will require unique analyses to evaluate the risk to the public from normal operations and credible accident conditions. This letter outlines major safety documents that will be submitted with estimated deliverable dates. Included in this planning is the reactor servicing documentation and shipping analysis that will be submitted to Naval Reactors.

  3. Scaleable, High Efficiency Microchannel Sabatier Reactor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A Microchannel Sabatier Reactor System (MSRS) consisting of cross connected arrays of isothermal or graded temperature reactors is proposed. The reactor array...

  4. MERCHANT MARINE SHIP REACTOR

    Science.gov (United States)

    Mumm, J.F.; North, D.C. Jr.; Rock, H.R.; Geston, D.K.

    1961-05-01

    A nuclear reactor is described for use in a merchant marine ship. The reactor is of pressurized light water cooled and moderated design in which three passes of the water through the core in successive regions of low, intermediate, and high heat generation and downflow in a fuel region are made. The foregoing design makes a compact reactor construction with extended core life. The core has an egg-crate lattice containing the fuel elements confined between a lower flow baffle and upper grid plate, with the latter serving also as part of a turn- around manifold from which the entire coolant is distributed into the outer fuel elements for the second pass through the core. The inner fuel elements are cooled in the third pass.

  5. Nuclear Rocket Engine Reactor

    CERN Document Server

    Lanin, Anatoly

    2013-01-01

    The development of a nuclear rocket engine reactor (NRER ) is presented in this book. The working capacity of an active zone NRER under mechanical and thermal load, intensive neutron fluxes, high energy generation (up to 30 MBT/l) in a working medium (hydrogen) at temperatures up to 3100 K is displayed. Design principles and bearing capacity of reactors area discussed on the basis of simulation experiments and test data of a prototype reactor. Property data of dense constructional, porous thermal insulating and fuel materials like carbide and uranium carbide compounds in the temperatures interval 300 - 3000 K are presented. Technological aspects of strength and thermal strength resistance of materials are considered. The design procedure of possible emergency processes in the NRER is developed and risks for their origination are evaluated. Prospects of the NRER development for pilotless space devices and piloted interplanetary ships are viewed.

  6. Nuclear reactor safety device

    Science.gov (United States)

    Hutter, Ernest

    1986-01-01

    A safety device is disclosed for use in a nuclear reactor for axially repositioning a control rod with respect to the reactor core in the event of an upward thermal excursion. Such safety device comprises a laminated helical ribbon configured as a tube-like helical coil having contiguous helical turns with slidably abutting edges. The helical coil is disclosed as a portion of a drive member connected axially to the control rod. The laminated ribbon is formed of outer and inner laminae. The material of the outer lamina has a greater thermal coefficient of expansion than the material of the inner lamina. In the event of an upward thermal excursion, the laminated helical coil curls inwardly to a smaller diameter. Such inward curling causes the total length of the helical coil to increase by a substantial increment, so that the control rod is axially repositioned by a corresponding amount to reduce the power output of the reactor.

  7. Heat dissipating nuclear reactor

    Science.gov (United States)

    Hunsbedt, A.; Lazarus, J.D.

    1985-11-21

    Disclosed is a nuclear reactor containment adapted to retain and cool core debris in the unlikely event of a core meltdown and subsequent breach in the reactor vessel. The reactor vessel is seated in a cavity which has a thick metal sidewall that is integral with a thick metal basemat at the bottom of the cavity. The basemat extends beyond the perimeter of the cavity sidewall. Underneath the basemat is a porous bed with water pipes and steam pipes running into it. Water is introduced into the bed and converted into steam which is vented to the atmosphere. A plurality of metal pilings in the form of H-beams extend from the metal base plate downwardly and outwardly into the earth.

  8. Reactor for exothermic reactions

    Science.gov (United States)

    Smith, Jr., Lawrence A.; Hearn, Dennis; Jones, Jr., Edward M.

    1993-01-01

    A liquid phase process for oligomerization of C.sub.4 and C.sub.5 isoolefins or the etherification thereof with C.sub.1 to C.sub.6 alcohols wherein the reactants are contacted in a reactor with a fixed bed acid cation exchange resin catalyst at an LHSV of 5 to 20, pressure of 0 to 400 psig and temperature of 120.degree. to 300.degree. F. Wherein the improvement is the operation of the reactor at a pressure to maintain the reaction mixture at its boiling point whereby at least a portion but less than all of the reaction mixture is vaporized. By operating at the boiling point and allowing a portion of the reaction mixture to vaporize, the exothermic heat of reaction is dissipated by the formation of more boil up and the temperature in the reactor is controlled.

  9. An Overview of Reactor Concepts, a Survey of Reactor Designs.

    Science.gov (United States)

    1985-02-01

    implies, this reactor uses gas as the primary coolant . The coolant has a higher exit temperature when leaving the core than the PWR water 6 AFWL-TN-84...nuclear reactors, coolants must be used to ensure material components are not subject to failure due to the temperature exceeding melting points...Reactors that use deu- terium (heavy water) as a coolant can use natural uranium as a fuel. The * Canadian reactor, CANDU , utilizes this concept

  10. Oscillatory flow chemical reactors

    Directory of Open Access Journals (Sweden)

    Slavnić Danijela S.

    2014-01-01

    Full Text Available Global market competition, increase in energy and other production costs, demands for high quality products and reduction of waste are forcing pharmaceutical, fine chemicals and biochemical industries, to search for radical solutions. One of the most effective ways to improve the overall production (cost reduction and better control of reactions is a transition from batch to continuous processes. However, the reactions of interests for the mentioned industry sectors are often slow, thus continuous tubular reactors would be impractically long for flow regimes which provide sufficient heat and mass transfer and narrow residence time distribution. The oscillatory flow reactors (OFR are newer type of tube reactors which can offer solution by providing continuous operation with approximately plug flow pattern, low shear stress rates and enhanced mass and heat transfer. These benefits are the result of very good mixing in OFR achieved by vortex generation. OFR consists of cylindrical tube containing equally spaced orifice baffles. Fluid oscillations are superimposed on a net (laminar flow. Eddies are generated when oscillating fluid collides with baffles and passes through orifices. Generation and propagation of vortices create uniform mixing in each reactor cavity (between baffles, providing an overall flow pattern which is close to plug flow. Oscillations can be created by direct action of a piston or a diaphragm on fluid (or alternatively on baffles. This article provides an overview of oscillatory flow reactor technology, its operating principles and basic design and scale - up characteristics. Further, the article reviews the key research findings in heat and mass transfer, shear stress, residence time distribution in OFR, presenting their advantages over the conventional reactors. Finally, relevant process intensification examples from pharmaceutical, polymer and biofuels industries are presented.

  11. Reactor Materials Research

    Energy Technology Data Exchange (ETDEWEB)

    Van Walle, E

    2002-04-01

    The activities of SCK-CEN's Reactor Materials Research Department for 2001 are summarised. The objectives of the department are: (1) to evaluate the integrity and behaviour of structural materials used in nuclear power industry; (2) to conduct research to unravel and understand the parameters that determine the material behaviour under or after irradiation; (3) to contribute to the interpretation, the modelling of the material behaviour and to develop and assess strategies for optimum life management of nuclear power plant components. The programmes within the department are focussed on studies concerning (1) Irradiation Assisted Stress Corrosion Cracking (IASCC); (2) nuclear fuel; and (3) Reactor Pressure Vessel Steel.

  12. Nuclear reactor apparatus

    Science.gov (United States)

    Wade, Elman E.

    1978-01-01

    A lifting, rotating and sealing apparatus for nuclear reactors utilizing rotating plugs above the nuclear reactor core. This apparatus permits rotation of the plugs to provide under the plug refueling of a nuclear core. It also provides a means by which positive top core holddown can be utilized. Both of these operations are accomplished by means of the apparatus lifting the top core holddown structure off the nuclear core while stationary, and maintaining this structure in its elevated position during plug rotation. During both of these operations, the interface between the rotating member and its supporting member is sealingly maintained.

  13. Perspectives on reactor safety

    Energy Technology Data Exchange (ETDEWEB)

    Haskin, F.E. [New Mexico Univ., Albuquerque, NM (United States). Dept. of Chemical and Nuclear Engineering; Camp, A.L. [Sandia National Labs., Albuquerque, NM (United States)

    1994-03-01

    The US Nuclear Regulatory Commission (NRC) maintains a technical training center at Chattanooga, Tennessee to provide appropriate training to both new and experienced NRC employees. This document describes a one-week course in reactor, safety concepts. The course consists of five modules: (1) historical perspective; (2) accident sequences; (3) accident progression in the reactor vessel; (4) containment characteristics and design bases; and (5) source terms and offsite consequences. The course text is accompanied by slides and videos during the actual presentation of the course.

  14. Safe reactor power

    Energy Technology Data Exchange (ETDEWEB)

    Menegus, R.L.; Ring, H.F.; Bernath, L.

    1956-05-15

    The upper limit on reactor operating power is established not only by safety considerations during steady-state operation but also by the requirement that during an accident no permanent damage be inflicted upon the reactor or the fuel charge. Two general categories of accidents are recognized; they are the ``nuclear runaway`` and the ``loss of coolant flow`` incidents. In this memorandum an incident of the latter type is analyzed. It is assumed that the safety rods function normally, and a method is defined for establishing the highest operating power that may be permitted if the postulated accident is to do no damage.

  15. High Flux Isotope Reactor (HFIR)

    Data.gov (United States)

    Federal Laboratory Consortium — The HFIR at Oak Ridge National Laboratory is a light-water cooled and moderated reactor that is the United States’ highest flux reactor-based neutron source. HFIR...

  16. Reactor operation environmental information document

    Energy Technology Data Exchange (ETDEWEB)

    Haselow, J.S.; Price, V.; Stephenson, D.E.; Bledsoe, H.W.; Looney, B.B.

    1989-12-01

    The Savannah River Site (SRS) produces nuclear materials, primarily plutonium and tritium, to meet the requirements of the Department of Defense. These products have been formed in nuclear reactors that were built during 1950--1955 at the SRS. K, L, and P reactors are three of five reactors that have been used in the past to produce the nuclear materials. All three of these reactors discontinued operation in 1988. Currently, intense efforts are being extended to prepare these three reactors for restart in a manner that protects human health and the environment. To document that restarting the reactors will have minimal impacts to human health and the environment, a three-volume Reactor Operations Environmental Impact Document has been prepared. The document focuses on the impacts of restarting the K, L, and P reactors on both the SRS and surrounding areas. This volume discusses the geology, seismology, and subsurface hydrology. 195 refs., 101 figs., 16 tabs.

  17. Reactor operation safety information document

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    The report contains a reactor facility description which includes K, P, and L reactor sites, structures, operating systems, engineered safety systems, support systems, and process and effluent monitoring systems; an accident analysis section which includes cooling system anomalies, radioactive materials releases, and anticipated transients without scram; a summary of onsite doses from design basis accidents; severe accident analysis (reactor core disruption); a description of operating contractor organization and emergency planning; and a summary of reactor safety evolution. (MB)

  18. MCNP5 and GEANT4 comparisons for preliminary Fast Neutron Pencil Beam design at the University of Utah TRIGA system

    Science.gov (United States)

    Adjei, Christian Amevi

    The main objective of this thesis is twofold. The starting objective was to develop a model for meaningful benchmarking of different versions of GEANT4 against an experimental set-up and MCNP5 pertaining to photon transport and interactions. The following objective was to develop a preliminary design of a Fast Neutron Pencil Beam (FNPB) Facility to be applicable for the University of Utah research reactor (UUTR) using MCNP5 and GEANT4. The three various GEANT4 code versions, GEANT4.9.4, GEANT4.9.3, and GEANT4.9.2, were compared to MCNP5 and the experimental measurements of gamma attenuation in air. The average gamma dose rate was measured in the laboratory experiment at various distances from a shielded cesium source using a Ludlum model 19 portable NaI detector. As it was expected, the gamma dose rate decreased with distance. All three GEANT4 code versions agreed well with both the experimental data and the MCNP5 simulation. Additionally, a simple GEANT4 and MCNP5 model was developed to compare the code agreements for neutron interactions in various materials. Preliminary FNPB design was developed using MCNP5; a semi-accurate model was developed using GEANT4 (because GEANT4 does not support the reactor physics modeling, the reactor was represented as a surface neutron source, thus a semi-accurate model). Based on the MCNP5 model, the fast neutron flux in a sample holder of the FNPB is obtained to be 6.52×107 n/cm2s, which is one order of magnitude lower than gigantic fast neutron pencil beam facilities existing elsewhere. The MCNP5 model-based neutron spectrum indicates that the maximum expected fast neutron flux is at a neutron energy of ~1 MeV. In addition, the MCNP5 model provided information on gamma flux to be expected in this preliminary FNPB design; specifically, in the sample holder, the gamma flux is to be expected to be around 108 γ/cm 2s, delivering a gamma dose of 4.54×103 rem/hr. This value is one to two orders of magnitudes below the gamma

  19. Fast reactor programme in India

    Indian Academy of Sciences (India)

    2015-09-04

    Sep 4, 2015 ... criteria; passive shutdown and decay heat removal systems; fast breeder reactors in India. PACS No. 28.41.−i. 1. ... water reactors, mainly pressurized heavy water reactors (PHWRs) to extract ∼10 GWe capacity for ..... commissioning phase and most of the supporting systems have been commissioned and.

  20. Engineering reactors for catalytic reactions

    Indian Academy of Sciences (India)

    Extensive studies have been conducted to establish sound basis for design and engineering of reactors for practising such catalytic reactions and for realizing improvements in reactor performance. In this article, application of recent (and not so recent) developments in engineering reactors for catalytic reactions is ...

  1. REACTOR FUEL ELEMENTS TESTING CONTAINER

    Science.gov (United States)

    Whitham, G.K.; Smith, R.R.

    1963-01-15

    This patent shows a method for detecting leaks in jacketed fuel elements. The element is placed in a sealed tank within a nuclear reactor, and, while the reactor operates, the element is sparged with gas. The gas is then led outside the reactor and monitored for radioactive Xe or Kr. (AEC)

  2. Fast reactor programme in India

    Indian Academy of Sciences (India)

    2015-09-04

    Sep 4, 2015 ... Home; Journals; Pramana – Journal of Physics; Volume 85; Issue 3. Fast reactor programme in India. P Chellapandi P R ... Keywords. Sodium fast reactor; design challenges; construction challenges; emerging safety criteria; passive shutdown and decay heat removal systems; fast breeder reactors in India.

  3. Stabilized Spheromak Fusion Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Fowler, T

    2007-04-03

    The U.S. fusion energy program is focused on research with the potential for studying plasmas at thermonuclear temperatures, currently epitomized by the tokamak-based International Thermonuclear Experimental Reactor (ITER) but also continuing exploratory work on other plasma confinement concepts. Among the latter is the spheromak pursued on the SSPX facility at LLNL. Experiments in SSPX using electrostatic current drive by coaxial guns have now demonstrated stable spheromaks with good heat confinement, if the plasma is maintained near a Taylor state, but the anticipated high current amplification by gun injection has not yet been achieved. In future experiments and reactors, creating and maintaining a stable spheromak configuration at high magnetic field strength may require auxiliary current drive using neutral beams or RF power. Here we show that neutral beam current drive soon to be explored on SSPX could yield a compact spheromak reactor with current drive efficiency comparable to that of steady state tokamaks. Thus, while more will be learned about electrostatic current drive in coming months, results already achieved in SSPX could point to a productive parallel development path pursuing auxiliary current drive, consistent with plans to install neutral beams on SSPX in the near future. Among possible outcomes, spheromak research could also yield pulsed fusion reactors at lower capital cost than any fusion concept yet proposed.

  4. Nuclear Reactors and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Cason, D.L.; Hicks, S.C. [eds.

    1992-01-01

    This publication Nuclear Reactors and Technology (NRT) announces on a monthly basis the current worldwide information available from the open literature on nuclear reactors and technology, including all aspects of power reactors, components and accessories, fuel elements, control systems, and materials. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency`s Energy Technology Data Exchange or government-to-government agreements. The digests in NRT and other citations to information on nuclear reactors back to 1948 are available for online searching and retrieval on the Energy Science and Technology Database and Nuclear Science Abstracts (NSA) database. Current information, added daily to the Energy Science and Technology Database, is available to DOE and its contractors through the DOE Integrated Technical Information System. Customized profiles can be developed to provide current information to meet each user`s needs.

  5. Nuclear reactor building

    Science.gov (United States)

    Gou, P.F.; Townsend, H.E.; Barbanti, G.

    1994-04-05

    A reactor building for enclosing a nuclear reactor includes a containment vessel having a wetwell disposed therein. The wetwell includes inner and outer walls, a floor, and a roof defining a wetwell pool and a suppression chamber disposed there above. The wetwell and containment vessel define a drywell surrounding the reactor. A plurality of vents are disposed in the wetwell pool in flow communication with the drywell for channeling into the wetwell pool steam released in the drywell from the reactor during a LOCA for example, for condensing the steam. A shell is disposed inside the wetwell and extends into the wetwell pool to define a dry gap devoid of wetwell water and disposed in flow communication with the suppression chamber. In a preferred embodiment, the wetwell roof is in the form of a slab disposed on spaced apart support beams which define there between an auxiliary chamber. The dry gap, and additionally the auxiliary chamber, provide increased volume to the suppression chamber for improving pressure margin. 4 figures.

  6. JACKETED REACTOR FUEL ELEMENT

    Science.gov (United States)

    Smith, K.F.; Van Thyne, R.J.

    1958-12-01

    A fuel element is described for fast reactors comprised of a core of uranium metal containing material and a jacket around the core, the jacket consisting of from 2.5 to 15 percent of titanium, from 1 to 5 percent of niobium, and from 80 to 96.5 percent of vanadium.

  7. Nuclear rocket engine reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lanin, Anatoly

    2013-07-01

    Covers a new technology of nuclear reactors and the related materials aspects. Integrates physics, materials science and engineering Serves as a basic book for nuclear engineers and nuclear physicists. The development of a nuclear rocket engine reactor (NRER) is presented in this book. The working capacity of an active zone NRER under mechanical and thermal load, intensive neutron fluxes, high energy generation (up to 30 MBT/l) in a working medium (hydrogen) at temperatures up to 3100 K is displayed. Design principles and bearing capacity of reactors area discussed on the basis of simulation experiments and test data of a prototype reactor. Property data of dense constructional, porous thermal insulating and fuel materials like carbide and uranium carbide compounds in the temperatures interval 300 - 3000 K are presented. Technological aspects of strength and thermal strength resistance of materials are considered. The design procedure of possible emergency processes in the NRER is developed and risks for their origination are evaluated. Prospects of the NRER development for pilotless space devices and piloted interplanetary ships are viewed.

  8. WATER BOILER REACTOR

    Science.gov (United States)

    King, L.D.P.

    1960-11-22

    As its name implies, this reactor utilizes an aqueous solution of a fissionable element salt, and is also conventional in that it contains a heat exchanger cooling coil immersed in the fuel. Its novelty lies in the utilization of a cylindrical reactor vessel to provide a critical region having a large and constant interface with a supernatant vapor region, and the use of a hollow sleeve coolant member suspended from the cover assembly in coaxial relation with the reactor vessel. Cool water is circulated inside this hollow coolant member, and a gap between its outer wall and the reactor vessel is used to carry off radiolytic gases for recombination in an external catalyst chamber. The central passage of the coolant member defines a reflux condenser passage into which the externally recombined gases are returned and condensed. The large and constant interface between fuel solution and vapor region prevents the formation of large bubbles and minimizes the amount of fuel salt carried off by water vapor, thus making possible higher flux densities, specific powers and power densities.

  9. Fossil fuel furnace reactor

    Science.gov (United States)

    Parkinson, William J.

    1987-01-01

    A fossil fuel furnace reactor is provided for simulating a continuous processing plant with a batch reactor. An internal reaction vessel contains a batch of shale oil, with the vessel having a relatively thin wall thickness for a heat transfer rate effective to simulate a process temperature history in the selected continuous processing plant. A heater jacket is disposed about the reactor vessel and defines a number of independent controllable temperature zones axially spaced along the reaction vessel. Each temperature zone can be energized to simulate a time-temperature history of process material through the continuous plant. A pressure vessel contains both the heater jacket and the reaction vessel at an operating pressure functionally selected to simulate the continuous processing plant. The process yield from the oil shale may be used as feedback information to software simulating operation of the continuous plant to provide operating parameters, i.e., temperature profiles, ambient atmosphere, operating pressure, material feed rates, etc., for simulation in the batch reactor.

  10. NEUTRONIC REACTOR SHIELD

    Science.gov (United States)

    Fermi, E.; Zinn, W.H.

    1957-09-24

    The reactor radiation shield material is comprised of alternate layers of iron-containing material and compressed cellulosic material, such as masonite. The shielding material may be prefabricated in the form of blocks, which can be stacked together in ary desired fashion to form an effective shield.

  11. Neutronic Reactor Structure

    Science.gov (United States)

    Vernon, H. C.; Weinberg, A. M.

    1961-05-30

    The neutronic reactor is comprised of a core consisting of natural uranium and heavy water with a K-factor greater than unity. The core is surrounded by a reflector consisting of natural uranium and ordinary water with a Kfactor less than unity. (AEC)

  12. NEUTRONIC REACTOR CONTROL ELEMENT

    Science.gov (United States)

    Beaver, R.J.; Leitten, C.F. Jr.

    1962-04-17

    A boron-10 containing reactor control element wherein the boron-10 is dispersed in a matrix material is describeri. The concentration of boron-10 in the matrix varies transversely across the element from a minimum at the surface to a maximum at the center of the element, prior to exposure to neutrons. (AEC)

  13. Thermal Reactor Safety

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    Information is presented concerning fire risk and protection; transient thermal-hydraulic analysis and experiments; class 9 accidents and containment; diagnostics and in-service inspection; risk and cost comparison of alternative electric energy sources; fuel behavior and experiments on core cooling in LOCAs; reactor event reporting analysis; equipment qualification; post facts analysis of the TMI-2 accident; and computational methods.

  14. Research on the reactor physics and reactor safety of VVER reactors. AER Symposium 2016

    Energy Technology Data Exchange (ETDEWEB)

    Kliem, S.

    2017-09-15

    The selected paperscan be attributed to the following main subjects: Reactor start-up tests and use of corresponding data for code validation, code development and application, approaches for safety analyses, closure of nuclear fuel cycle, prospective reactor concepts.

  15. Sequencing Bacth Reactors; Reactores biologicos secuenciados

    Energy Technology Data Exchange (ETDEWEB)

    Nolasco, D.; Manoharan, M.

    1999-06-01

    The application of sequencing batch reactors (SBR) for wastewater treatment is becoming increasingly popular. However, published information on process performance and construction costs for SBRs is scarce. For this reason. Environment Canada, the Ontario Ministry of the Environment (MOE), and the Water Environment Association of Ontario (WEAO) decided to sponsor a program to evaluate the performance of 75 municipal SBRs in Canada and the United States. Effluent quality, construction costs, and design and operating problems were investigated. Areas for optimization found as a result of this investigation were classified an prioritized based on their impact on operational costs, treatment capacity, effluent quality, and frequency of occurrence. A list of recommendations for process optimization was prepared. A construction cost comparison between activated sludge systems of continuous flow and SBRs was prepared. (Author) 12 refs.

  16. Characterization of a Neutron Beam Following Reconfiguration of the Neutron Radiography Reactor (NRAD Core and Addition of New Fuel Elements

    Directory of Open Access Journals (Sweden)

    Aaron E. Craft

    2016-02-01

    Full Text Available The neutron radiography reactor (NRAD is a 250 kW Mark-II Training, Research, Isotopes, General Atomics (TRIGA reactor at Idaho National Laboratory, Idaho Falls, ID, USA. The East Radiography Station (ERS is one of two neutron beams at the NRAD used for neutron radiography, which sits beneath a large hot cell and is primarily used for neutron radiography of highly radioactive objects. Additional fuel elements were added to the NRAD core in 2013 to increase the excess reactivity of the reactor, and may have changed some characteristics of the neutron beamline. This report discusses characterization of the neutron beamline following the addition of fuel to the NRAD. This work includes determination of the facility category according to the American Society for Testing and Materials (ASTM standards, and also uses an array of gold foils to determine the neutron beam flux and evaluate the neutron beam profile. The NRAD ERS neutron beam is a Category I neutron radiography facility, the highest possible quality level according to the ASTM. Gold foil activation experiments show that the average neutron flux with length-to-diameter ratio (L/D = 125 is 5.96 × 106 n/cm2/s with a 2σ standard error of 2.90 × 105 n/cm2/s. The neutron beam profile can be considered flat for qualitative neutron radiographic evaluation purposes. However, the neutron beam profile should be taken into account for quantitative evaluation.

  17. CER. Research reactors in France

    Energy Technology Data Exchange (ETDEWEB)

    Estrade, Jerome [CEA, DEN, DER, Saint-Paul-lez-Durance (France). Jules Horowitz Reactor (JHR)

    2012-10-15

    Networking and the establishment of coalitions between research reactors are important to guarantee a high technical quality of the facility, to assure well educated and trained personnel, to harmonize the codes of standards and the know-ledge of the personnel as well as to enhance research reactor utilization. In addition to the European co-operation, country-specific working groups have been established for many years, such as the French research reactor Club d'Exploitants des Reacteurs (CER). It is the association of French research reactors representing all types of research reactors from zero power up to high flux reactors. CER was founded in 1990 and today a number of 14 research reactors meet twice a year for an exchange of experience. (orig.)

  18. Methanogenesis in Thermophilic Biogas Reactors

    DEFF Research Database (Denmark)

    Ahring, Birgitte Kiær

    1995-01-01

    Methanogenesis in thermophilic biogas reactors fed with different wastes is examined. The specific methanogenic activity with acetate or hydrogen as substrate reflected the organic loading of the specific reactor examined. Increasing the loading of thermophilic reactors stabilized the process...... as indicated by a lower concentration of volatile fatty acids in the effluent from the reactors. The specific methanogenic activity in a thermophilic pilot-plant biogas reactor fed with a mixture of cow and pig manure reflected the stability of the reactor. The numbers of methanogens counted by the most...... against Methanothrix soehngenii or Methanothrix CALS-I in any of the thermophilic biogas reactors examined. Studies using 2-14C-labeled acetate showed that at high concentrations (more than approx. 1 mM) acetate was metabolized via the aceticlastic pathway, transforming the methyl-group of acetate...

  19. Nuclear reactor construction with bottom supported reactor vessel

    Science.gov (United States)

    Sharbaugh, John E.

    1987-01-01

    An improved liquid metal nuclear reactor construction has a reactor core and a generally cylindrical reactor vessel for holding a large pool of low pressure liquid metal coolant and housing the core within the pool. The reactor vessel has an open top end, a closed flat bottom end wall and a continuous cylindrical closed side wall interconnecting the top end and bottom end wall. The reactor also has a generally cylindrical concrete containment structure surrounding the reactor vessel and being formed by a cylindrical side wall spaced outwardly from the reactor vessel side wall and a flat base mat spaced below the reactor vessel bottom end wall. A central support pedestal is anchored to the containment structure base mat and extends upwardly therefrom to the reactor vessel and upwardly therefrom to the reactor core so as to support the bottom end wall of the reactor vessel and the lower end of the reactor core in spaced apart relationship above the containment structure base mat. Also, an annular reinforced support structure is disposed in the reactor vessel on the bottom end wall thereof and extends about the lower end of the core so as to support the periphery thereof. In addition, an annular support ring having a plurality of inward radially extending linear members is disposed between the containment structure base mat and the bottom end of the reactor vessel wall and is connected to and supports the reactor vessel at its bottom end on the containment structure base mat so as to allow the reactor vessel to expand radially but substantially prevent any lateral motions that might be imposed by the occurrence of a seismic event. The reactor construction also includes a bed of insulating material in sand-like granular form, preferably being high density magnesium oxide particles, disposed between the containment structure base mat and the bottom end wall of the reactor vessel and uniformly supporting the reactor vessel at its bottom end wall on the containment

  20. Reactor core stability monitoring method for BWR type reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kanemoto, Shigeru; Ebata, Shigeo.

    1992-09-01

    In an operation for a BWR type reactor, reactor power is usually increased or decreased by controlling both of control rods and reactor core flow rate. Under a certain condition, the reactor core is made unstable by the coupling of nuclear and thermohydrodynamic characteristics in the reactor. Therefore, the reactor power and the reactor core flow rate are changed within a range predetermined by a design calculation. However, if reactor core stability can be always measured and monitored, it is useful for safe operation, as well as an existent operation range can be extended to enable more effective operation. That is, autoregressive a coefficient is determined successively on real time based on fluctuation components of neutron flux signals. Based on the result, an amplification ratio, as a typical measure of the reactor core stability, is determined on a real time. A time constant of the successive calculation for the autoregressive coefficient can be made variable by the amplification ratio. Then, the amplification ratio is estimated at a constant accuracy. With such procedures, the reactor core stability can be monitored successively in an ON-line manner at a high accuracy, thereby enabling to improve the operation performance. (I.S.).