WorldWideScience

Sample records for reactor analisis preliminar

  1. Preliminary risk analysis of an Hydrogen production plant using the reformed process of methane with vapor coupled to a high temperature nuclear reactor; Analisis preliminar de riesgo de una planta de produccion de hidrogeno utilizando el proceso de reformado de metano con vapor acoplada a un reactor nuclear de alta temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Flores y Flores, A. [Facultad de Ingenieria, UNAM, 04510 Mexico D.F. (Mexico)]. E-mail: alain_fyf@yahoo.com; Nelson E, P.F.; Francois L, J.L. [Facultad de Ingenieria, Laboratorio de Analisis en Ingenieria de Reactores Nucleares, UNAM, Paseo Cuauhnahuac 8532, 62550 Jiutepec, Morelos (Mexico)

    2004-07-01

    It is necessary to identify the different types of dangers, as well as their causes, probabilities and consequences of the same ones, inside plants, industries and any process to classify the risks. This work is focused in particular to a study using the technical HAZOP (Hazard and Operability) for a plant of reformed of methane with vapor coupled to a nuclear reactor of the type HTTR (High Temperature Test Reactor), which is designed to be built in Japan. In particular in this study the interaction is analyzed between the nuclear reactor and the plant of reformed of methane with vapor. After knowing the possible causes of risk one it is built chart of results of HAZOP to have a better vision of the consequences of this faults toward the buildings and constructions, to people and the influence of the fault on each plant; for what there are proposed solutions to mitigate these consequences or to avoid them. The work is divided in three sections: a brief introduction about the technique of HAZOP; some important aspects of the plant of reformed of methane with vapor; and the construction of the chart of results of HAZOP. (Author)

  2. ANALISIS TRANSIEN PADA PASSIVE COMPACT MOLTEN SALT REACTOR (PCMSR

    Directory of Open Access Journals (Sweden)

    M. Makrus Imron

    2015-04-01

    Full Text Available Penggunaan bahan bakar cair berupa garam LiF-BeF2-ThF4-UF4 pada Passive Compact Molten Salt Reactor (PCMSR meyebabkan pengendalian daya pada PCMSR dapat dilakukan dengan mengendalikan laju aliran bahan bakar dan pendingin. Sedangkan dari sistem keselamatan, penggunaan bahan bakar cair menjadikan PCMSR memiliki karakter keselamatan melekat (inherent safety yang baik. Pada penelitian ini telah dilakukan analisis transien PCMSR pada tiga kondisi, yaitu: ketika terjadi perubahan laju aliran bahan bakar, ketika terjadi perubahan laju aliran pendingin dan ketika terdapat kegagalan pada sistem pelepasan panas (loss of heat sink. Penelitian dilakukan dengan memodelkan reaktor pada kondisi tunak menggunakan paket program. Standart Reactor Analysis Code (SRAC. Selanjutnya dari keluaran paket program SRAC diperoleh data data yang meliputi fluks netron,konstanta grup, kontanta peluran prekusor netron, fraksi netron kasip untuk perhitungan transien. Penelitian ini menunjukkan bahwa penurunan laju aliran bahan bakar sebesar 50 % dari laju bahan bakar sebelumnya, menyebabkan daya pada PCMSR turun menjadi 78 % dari daya sebelumnya. Dan penurunan laju aliran pendingin sebesar 50 % dari laju pendingin sebelumnya, menyebabkan daya pada PCMSR turun menjadi 63 % dari daya sebelumnya. Sedangkan pada saat terjadi loss of heat sink daya PCMSR menunjukkan penurunan. Kata kunci: PCMSR, transien, daya, laju aliran.   The use of liquid fuels in the form of molten salts LiF-BeF2-ThF4-UF4 in Passive Compact Molten Salt Reactor (PCMSR makes power control at PCMSR can be done by controlling the flow rate of fuel and coolant. In addition, from safety systems aspect, the use of liquid fuels makes PCMSR has good inherent safety characteristics. In this study transient analysis has been carried out on three conditions of PCMSR, namely when the fuel flow rate is changing, when the coolant flow rate is changing and when there is loss of heat sink condition. This research is

  3. Estudio preliminar para el tratamiento de lixiviados en un reactor de biodiscos

    OpenAIRE

    Ordóñez Losada, Paola Jimena; Betancur Pérez, Alonso

    2003-01-01

    El presente trabajo hace parte de un proyecto de investigación de la Universidad Nacional de Colombia Sede Manizales y EMAS (Empresa Metropolitana de Aseo S.A. E.S.P) para encontrar la mejor alternativa para el tratamiento de los lixiviados del relleno sanitario “La Esmeralda” de la ciudad de Manizales, con el fin de cumplir la legislación ambiental vigente sobre vertimientos líquidos industriales a las aguas superficiales. Se analizó en forma preliminar la aplicación de la tecnología biodisc...

  4. Preliminary design of a Binary Breeder Reactor; Diseno preliminar de un reactor esferico de quema/cria

    Energy Technology Data Exchange (ETDEWEB)

    Garcia C, E. Y.; Francois, J. L.; Lopez S, R. C., E-mail: eliasgarcerv@hotmail.com [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac No. 8532, 62550 Jiutepec, Morelos (Mexico)

    2014-10-15

    A binary breeder reactor (BBR) is a reactor that by means of the transmutation and fission process can operates through the depleted uranium burning with a small quantity of fissile material. The advantages of a BBR with relation to other nuclear reactor types are numerous, taking into account their capacity to operate for a long time without requiring fuel reload or re-arrangement. In this work four different simulations are shown carried out with the MCNPX code with libraries Jeff-3.1 to 1200 K. The objective of this study is to compare two different models of BBR: a spherical reactor and a cylindrical one, using two fuel cycles for each one of them (U-Pu and Th-U) and different reflectors for the two different geometries. For all the models a super-criticality state was obtained at least 10.9 years without carrying out some fuel re-arrangement or reload. The plutonium-239 production was achieved in the models where natural uranium was used in the breeding area, while the production of uranium-233 was observed in the cases where thorium was used in the fertile area. Finally, a behavior of stationary wave reactor was observed inside the models of spherical reactor when contemplating the power uniform increment in the breeding area, while inside the cylindrical models was observed the behavior of a traveling wave reactor when registering the displacement of the burnt wave along the cylindrical model. (Author)

  5. Transient Analysis of Generation IV quick reactors; Analisis de Transitorios en Reactores Rapidos de Generacion IV

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez, M.; Martin-Fuertes, F.

    2013-07-01

    As a complement to the attached code 3D neutron-CIEMAT thermohydraulic added a module to simulate transient. Temporary kinetics is resolved by factoring flow in a spatial part and another storm. MCNP provides the reactivity and updated spatial function and COBRA-IV calculates the temperature distribution. Temporary dependence of amplitude is calculated using time delayed neutron Kinetic equations. As an example of application, examines a transient loss of flow in MYRRHA, a lead-cooled experimental reactor.

  6. Preliminary Validation and Verification Plan for CAREM Reactor Protection System; Modelo de Plan Preliminar de Validacion y Verificacion para el Sistema de Proteccion del Reactor CAREM

    Energy Technology Data Exchange (ETDEWEB)

    Fittipaldi, Ana; Felix, Maciel [Comision Nacional de Energia Atomica, Centro Atomico Bariloche (Argentina)

    2000-07-01

    The purpose of this paper, is to present a preliminary validation and verification plan for a particular architecture proposed for the CAREM reactor protection system with software modules (computer based system).These software modules can be either own design systems or systems based in commercial modules such as programmable logic controllers (PLC) redundant of last generation.During this study, it was seen that this plan can also be used as a validation and verification plan of commercial products (COTS, commercial off the shelf) and/or smart transmitters.The software life cycle proposed and its features are presented, and also the advantages of the preliminary validation and verification plan.

  7. Neutron analysis of the fuel of high temperature nuclear reactors; Analisis neutronico del combustible de reactores nucleares de alta temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Bastida O, G. E.; Francois L, J. L., E-mail: gbo729@yahoo.com.mx [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac 8532, 62550 Jiutepec, Morelos (Mexico)

    2014-10-15

    In this work a neutron analysis of the fuel of some high temperature nuclear reactors is presented, studying its main features, besides some alternatives of compound fuel by uranium and plutonium, and of coolant: sodium and helium. For this study was necessary the use of a code able to carry out a reliable calculation of the main parameters of the fuel. The use of the Monte Carlo method was convenient to simulate the neutrons transport in the reactor core, which is the base of the Serpent code, with which the calculations will be made for the analysis. (Author)

  8. Preliminary study for the determination of heavy metal in ground samples by GF-ASS Zeeman; Studio preliminare per la determinazione di metalli pesanti in campioni di suolo mediante analisi GF-AAS Zeeman

    Energy Technology Data Exchange (ETDEWEB)

    Casabianca, T.; Bitonte, R.; Epifani, M.; Ubaldi, C. [ENEA, Divisione Tecnologie Ingegneria e Servizi Ambientali, Centro Ricerche Trisaia, MT (Italy)

    2001-07-01

    In the framework of SIMOA project have been investigated methods to evaluate the level of soil contamination due to heavy metals. In this wok, it is discussed a procedure to measure topsoil bioavailable fraction of seven heavy metals (Cd, Cu, Pb, Ni, Cr, Hg). The adopted procedure is based on acid digestion followed by instrumental detection by means of graphite furnace atomic-absorption spectrophotometry (GFAAS) using Zeeman effect to reduce background contribution. Details of samples preparation and analysis, experimental setup optimization and statistical data analysis are presented, together with a discussion on method accuracy and data interpretation. [Italian] Nell'ambito del progetto SIMOA (Sistema Integrato di Monitoraggio Ambientale) per il monitoraggio ambientale nel bacino del Basento (Regione Basilicata, Italia), vengono investigati i metodi per il controllo dei livelli di inquinamento del suolo da parte di metalli pesanti. Nel presente lavoro viene proposta una procedura per determinare il livello di concentrazione della frazione biodisponibile di sette metalli pesanti (Cadmio, Rame, Piombo, Nickel, Cromo, Mercurio) in campion di suolo superficiale. Il metodo e' basato su di un trattamento di digestione acida in forno a microonde cui segue la rivelazione strumentale mediante spettrofotometria di assorbimento atomico in fornetto di grafite (GFAAS) con effetto Zeeman per la correzione del fondo. Si descrivono in dettaglio le fasi di preparazione dei campioni, la metodologia di misura e l'analisi statistica dei dati, oltre ad una discussione sull'attendibilita' del metodo e sui futuri sviluppi.

  9. Preliminary analysis of an hydrogen generator system based on nuclear energy in the Laguna Verde site; Analisis preliminar de un sistema generador de hidrogeno basado en energia nuclear en el sitio de Laguna Verde

    Energy Technology Data Exchange (ETDEWEB)

    Flores y Flores, A [FI-UNAM, 04500 Mexico D.F. (Mexico); Francois L, J L [FI-UNAM, Jiutepec, Morelos (Mexico)

    2003-07-01

    The shortage of fossil fuels in the next future, as well as the growing one demand of energetics and the high cost of the production of alternating fuels, it forces us to take advantage of to the maximum the fossil fuel with the one which we count and to look for the form of producing alternating fuels at a low cost and better even if these supply sources are reliable and non pollutants. It is intended a solution to the shortage of fuel; to use the thermal energy liberated of some appropriate nuclear reactor to be able to obtain a fuel but clean and relatively cheap as it is the hydrogen. In the first place the methods were looked for to produce hydrogen using thermal energy, later it was analyzed the temperature liberated by the existent nuclear reactors as well as the advanced designs, according to this liberated temperature settled down that the methods but feasible to produce hydrogen its were the one of reformed with water stream of the natural gas (methane) and the other one of the S-I thermochemical cycle, and the nuclear reactors that give the thermal energy for this production they are those of gas of high temperature. Once established the processes and the appropriate reactors, it was analyzed the site of Laguna Verde, with relationship to the free space to be able to place the reactor and the plant producer of hydrogen, as well as the direction in which blow the dominant winds and the near towns to the place, it was carried out an analysis of some explosion of tanks that could store hydrogen and the damage that its could to cause depending from the distance to which its were of the fire. Finally it was carried out an evaluation of capital and of operation costs for those two methods of hydrogen production. (Author)

  10. Preliminary analysis of the inclusion of security passive systems to reduce the impact of accidents in nuclear power plants; Analisis preliminar de la inclusion de sistemas pasivos de seguridad para reducir el impacto de accidentes en centrales nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez J, J.; Morales S, J. B. [UNAM, Facultad de Ingenieria, Circuito Interior, Ciudad Universitaria, 04510 Mexico D. F. (Mexico); Espinosa P, G., E-mail: jersonsanchez@gmail.com [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Av. San Rafael Atlixco 186, Col. Vicentina, 09340 Mexico D. F. (MX)

    2011-11-15

    In this work is presented a conceptual analysis of possible benefits and limitations that potentially represents the introduction of security passive systems to reduce the events impact of very low probability and high risk to the systems of radioactive material confinement of a light water reactor. These events are related with the possibility that a hydrogen explosion is presented as consequence of the accumulation of the same hydrogen in the contention of the reactor, in a scenario of severe accident. This accumulated hydrogen can be liberated in the reactor building or primary contention, where the conditions of their atmosphere make but prone the combustion. The catalytic recombination represents a viable option for the hydrogen concentrations decrease and because this recombination is highly exothermic, is important to analyze and to know if the recombined vapor to high temperature can be used in combination with vapor injectors that in turn, they are passive systems. In the following sections an explanation is presented about the use of the mentioned systems, as well as some results on the behavior of the vapor injectors. (Author)

  11. Comparative analysis of power conversion cycles optimized for fast reactors of generation IV; Analisis comparativo de ciclos de conversion de potencia optimizados para reactores rapidos de generacion IV

    Energy Technology Data Exchange (ETDEWEB)

    Perez Pichel, G. D.

    2011-07-01

    For the study, which is presented here, has been chosen as the specific parameters of each reactor, which are today the three largest projects within generation IV technology development: ESFR for the reactor's sodium, LEADER for the lead reactor's and finally, GoFastR in the case of reactor gas-cooled.

  12. Diseño preliminar de un rotor de onda para motores con microturbina

    Directory of Open Access Journals (Sweden)

    Gina P. Pérez B.

    2009-01-01

    Full Text Available Este trabajo presenta un analisis preliminar sobre los beneficios de ia implementacion de un rotor de onda en una micro-turbina convencional. Este estudio se enfoca en la consecución de un punto de disefio por medio de cálculos térmicos para así lograr una geometría adecuada, la cual podra ser evaluada por medio de Dinámica de Flujo Computacional CFD para determinar la viabilidad de la implementacion de este dispositive en un motor con micro-turbina a gas de 30 lb, de empuje.

  13. Neutronics and thermohydraulics of the reactor C.E.N.E.-Part I; Analisis neutronico y termohidraulico del reactor C.E.N.E. Parte I

    Energy Technology Data Exchange (ETDEWEB)

    Caro, R; Ahnert, C; Naudin, A E; Martinez Fanegas, R; Minguez, E; Rovira, A

    1976-07-01

    In this report the analysis of neutronics (both statics and kinetics), of the 10 MWt swimming pool reactor C.E.N.E, is included. In each of these chapters is given a short description of the theoretical model used, along with the theoretical versus experimental checking, carried out, whenever possible, with the reactors JEN-I and JEN-II of Junta de Energia Nuclear. (Author) 11 refs.

  14. Neutronics and thermohydraulics of the reactor C.E.N.E. Part II; Analisis neutronico y termohidraulico del reactor C.E.N.E. Parte II

    Energy Technology Data Exchange (ETDEWEB)

    Caro, R

    1976-07-01

    In this report the analysis of neutronics thermohydraulics and shielding of the 10 HWt swimming pool reactor C.E.N.E is included. In each of these chapters is given a short description of the theoretical model used, along with the theoretical versus experimental checking carried out, whenever possible, with the reactors JEN-I and JEN-II of Junta de Energia Nuclear. (Author) 11 refs.

  15. Analisi matematica

    CERN Document Server

    Canuto, Claudio

    2014-01-01

    Il presente testo intende essere di supporto ad un secondo insegnamento di Analisi Matematica in quei corsi di studio (quali ad esempio Ingegneria, Informatica, Fisica) in cui lo strumento matematico parte significativa della formazione dell'allievo. I concetti e i metodi fondamentali del calcolo differenziale ed integrale in più variabili, le serie di funzioni e le equazioni differenziali ordinarie sono presentati con l'obiettivo primario di addestrare lo studente ad un loro uso operativo, ma critico. L'impostazione didattica dell'opera ricalca quella usata nel testo parallelo di Analisi Matematica I. La modalità di presentazione degli argomenti ne permette un uso flessibile e modulare. Lo stile adottato privilegia la chiarezza e la linearità dell'esposizione. Il testo organizzato su due livelli di lettura. Uno, più essenziale, permette allo studente di cogliere i concetti indispensabili della materia, di familiarizzarsi con le relative tecniche di calcolo e di trovare le giustificazioni dei principali r...

  16. Development of a methodology of analysis of instabilities in BWR reactors; Desarrollo de una metodologia de analisis de inestabilidades en reactores PWR

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Fenoll, M.; Abarca, A.; Barrachina, T.; Miro, R.; Verdu, G.

    2012-07-01

    This paper presents a methodology of analysis of the reactors instabilities of BWR type. This methodology covers of modal analysis of the point operation techniques of signal analysis and simulation of transients, through 3D Coupled RELAP5/PARCSv2.7 code.

  17. Fuel burn analysis of a sodium fast reactor with KANEXT and Serpent; Analisis de quemado de combustible de un reactor rapido de sodio con KANEXT y SERPENT

    Energy Technology Data Exchange (ETDEWEB)

    Lopez S, R. C.; Francois L, J. L., E-mail: rcarlos.lope@gmail.com [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac 8532, 62550 Jiutepec, Morelos (Mexico)

    2015-09-15

    The fast reactors cooled by sodium are one of the options considered in the Generation IV. Since most of the reactors of Fourth Generation are still in development stage, is necessary to have efficient and reliable computational tools, this in order to obtain accurate results in reasonable computational times. In this paper is introduced and describes the deterministic code KANEXT (KArlsruhe Neutronic EXtended Tool) and is compared against a Monte Carlo code of more diffusion: Serpent. KANEXT, being a modular code requires the interaction of different modules to perform a job, this interaction of modules is described in this article. The parameters to be compared are the results of the neutron multiplication effective factor and the evolution of isotopes during the burning. The mentioned comparison is carried out for a fast reactor cooled by sodium of relatively small size compared to commercial size reactors. In this paper the particularities of the reactor are described, important for the analysis such as geometry, enrichments, reflector, etc. The considerations in the implementation in both codes are also described, as are simplifications, length of the burning steps, possible solutions of the Bateman equations for the burning fuel in Serpent and the solution options for transport (P3) and diffusion (P1) in KANEXT. The results show good correspondence between Serpent and KANEXT, which give confidence to continue using KANEXT as the main tool. Respect to computation time, time saving is evident with the use of deterministic codes instead of Monte Carlo codes, in this particular case, the time savings using KANEXT is about 98.5% of the time used by Serpent. (Author)

  18. Analysis and application of a simulator of a nuclear reactor AP-600; Analisis y aplicacion de un simulador de un reactor nuclear AP-600

    Energy Technology Data Exchange (ETDEWEB)

    Medina S, V. S. [UNAM, Facultad de Ingenieria, Circuito Interior, Ciudad Universitaria, 04510 Mexico D. F. (Mexico); Salazar S, E., E-mail: medina_victor@comunidad.unam.mx [UNAM, Facultad de Ingenieria, Division de Ingenieria Electrica, Laboratorio de Analisis en Ingenieria de Reactores Nucleares, 62250 Jiutepec, Morelos (MX)

    2011-11-15

    In front of the resurgence of interest in the nuclear power production, several national organizations have considered convenient to have highly specialized human resources in the technologies of nuclear reactors of III + and IV generation. For this task, the intensive and extensive applications of the computation should been considered, as the virtual instrumentation. The present work analyzes the possible applications of a nuclear simulator provided by the IAEA with base in the design of the reactor AP-600, using a focusing of modular model developed in FORTRAN. One part of the work that was made with the simulator includes the evaluation of 21 transitory events of operation, including the recreation of the accident happened in the nuclear power plant of Three Mile Island in 1979, comparing the actions flow and the answer of the systems under the intrinsic security of a III + generation reactor. The impact that had the mentioned accident was analyzed in the growing of the nuclear energy sector and in the public image with regard to the nuclear power plants. An application for this simulator was proposed, its use as tool for the instruction in the nuclear engineering courses using it to observe the operation of the different security systems and its interrelation inside the power plant as well as a theoretical/practical approach for the student. (Author)

  19. AZTLAN platform: Mexican platform for analysis and design of nuclear reactors; AZTLAN platform: plataforma mexicana para el analisis y diseno de reactores nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Gomez T, A. M.; Puente E, F. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Del Valle G, E. [IPN, Escuela Superior de Fisica y Matematicas, Av. IPN s/n, Edif. 9, Col. San Pedro Zacatenco, 07738 Mexico D. F. (Mexico); Francois L, J. L.; Martin del Campo M, C. [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac 8532, 62550 Jiutepec, Morelos (Mexico); Espinosa P, G., E-mail: armando.gomez@inin.gob.mx [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Av. San Rafael Atlixco No. 186, Col. Vicentina, 09340 Mexico D. F. (Mexico)

    2014-10-15

    The Aztlan platform Project is a national initiative led by the Instituto Nacional de Investigaciones Nucleares (ININ) which brings together the main public houses of higher studies in Mexico, such as: Instituto Politecnico Nacional, Universidad Nacional Autonoma de Mexico and Universidad Autonoma Metropolitana in an effort to take a significant step toward the calculation autonomy and analysis that seeks to place Mexico in the medium term in a competitive international level on software issues for analysis of nuclear reactors. This project aims to modernize, improve and integrate the neutron, thermal-hydraulic and thermo-mechanical codes, developed in Mexican institutions, within an integrated platform, developed and maintained by Mexican experts to benefit from the same institutions. This project is financed by the mixed fund SENER-CONACYT of Energy Sustain ability, and aims to strengthen substantially to research institutions, such as educational institutions contributing to the formation of highly qualified human resources in the area of analysis and design of nuclear reactors. As innovative part the project includes the creation of a user group, made up of members of the project institutions as well as the Comision Nacional de Seguridad Nuclear y Salvaguardias, Central Nucleoelectrica de Laguna Verde (CNLV), Secretaria de Energia (Mexico) and Karlsruhe Institute of Technology (Germany) among others. This user group will be responsible for using the software and provide feedback to the development equipment in order that progress meets the needs of the regulator and industry; in this case the CNLV. Finally, in order to bridge the gap between similar developments globally, they will make use of the latest super computing technology to speed up calculation times. This work intends to present to national nuclear community the project, so a description of the proposed methodology is given, as well as the goals and objectives to be pursued for the development of the

  20. Hydraulic analysis of emergency core cooling system of reactor RP-10; Analisis hidraulico del sistema de refrigeracion de emergencia del nucleo del reactor RP-10

    Energy Technology Data Exchange (ETDEWEB)

    Gallardo Padilla, Alberto; Moreyra, Geraldo Lazaro; Nieto Malpartida, Manuel [Instituto Peruano de Energia Nuclear, Lima (Peru)]. E-mail: agallardo@ipen.gob.pe; glazaro@ipen.gob.pe; mnieto@ipen.gob.pe

    2002-07-01

    For design of the Emergency Core Cooling System (ECCS) of reactor RP-10 from Peru is very important the hydraulic analysis of this system. In this paper, based on a basic design of the ECCS are showed the conservation equations, the parabolic movement, being deduced from them the equations to evaluate regarding the time the variables to consider in the design: level of the emergency water in the reserve tank, flow, reaches of sprinkle, etc. In this analysis is considered a quasi-stationary flow for simplify the calculation. The developed model was implemented in a computer program denominated ECCSRP10, in language Fortran 77, whose results are shown in form graph. From analysis of results we can conclude that for the system of pipe of the ECCS the appropriate diameter is of 2 in., and that the maximum flow possible to give is of 5 m{sup 3}/h for to assure a minimum time of refrigeration of 150000 seconds. Experimental tests were made in a prototype of the pipe system being demonstrated that the obtained results of the simplified calculation agree with the values registered with a global approach of 10%. (author)

  1. Preliminares

    Directory of Open Access Journals (Sweden)

    Desde el Jardín de Freud

    2015-05-01

    Full Text Available Desde el Jardín de Freud se encuentra indexada en el IBN-Publindex (Colciencias, en categoría C, y en las siguientes bases de datos y catálogos: EBSCO, ProQuest, Latindex, Dialnet, Rebiun, Doaj, e-Revistas y Biblioteca virtual Luis Ángel Arango.

  2. Preliminares

    Directory of Open Access Journals (Sweden)

    Desde el Jardín de Freud

    2016-01-01

    Full Text Available Desde el Jardín de Freud se encuentra indexada en el IBN-Publindex (Colciencias, en categoría C, y en las siguientes bases de datos y catálogos: EBSCO, ProQuest, CLASE, Latindex, Dialnet, Rebiun, Doaj, e-Revistas y Biblioteca virtual Luis Ángel Arango.

  3. Analisis Statistika dengan SPSS

    OpenAIRE

    Mustari, Kahar

    2012-01-01

    Buku ini membahas tentang berbagai model analisis statistika yang dapat digunakan dalam berbagai bidang penelitian. Pembahasan buku ini dilengkapi pula dengan penerapan analisis statistika yang menggunakan program SPSS versi 20 sehingga memudahkan pembaca untuk menerapkannya. Oleh karena itu, buku ini penting dibaca oleh mahasiswa atau peneliti yang melakukan pengolahan data penelitian.

  4. ANALISIS KESELAMATAN TERMOHIDROLIK BULK SHIELDING REAKTOR KARTINI

    Directory of Open Access Journals (Sweden)

    Azizul Khakim

    2015-10-01

    Full Text Available ABSTRAK ANALISIS KESELAMATAN TERMOHIDROLIK BULK SHIELDING REAKTOR KARTINI. Bulk shielding merupakan fasilitas yang terintegrasi dengan reaktor Kartini yang berfungsi sebagai penyimpanan sementara bahan bakar bekas. Fasilitas ini merupakan fasilitas yang termasuk dalam struktur, sistem dan komponen (SSK yang penting bagi keselamatan. Salah satu fungsi keselamatan dari sistem penanganan dan penyimpanan bahan bakar adalah mencegah kecelakaan kekritisan yang tak terkendali dan membatasi naiknya temperatur bahan bakar. Analisis keselamatan paling kurang harus mencakup analisis keselamatan dari sisi neutronik dan termo hidrolik Bulk shielding. Analisis termo hidrolik ditujukan untuk memastikan perpindahan panas dan proses pendinginan bahan bakar bekas berjalan baik dan tidak terjadi akumulasi panas yang mengancam integritas bahan bakar. Code tervalidasi PARET/ANL digunakan untuk analisis pendinginan dengan mode konveksi alam. Hasil perhitungan menunjukkan bahwa mode pendinginan konvekasi alam cukup memadai dalam mendinginkan panas sisa tanpa mengakibatkan kenaikan temperatur bahan bakar yang signifikan. Kata kunci: Bulk shielding, bahan bakar bekas, konveksi alam, PARET.   ABSTRACT THERMAL HYDRAULIC SAFETY ANALYSIS OF BULK SHIELDING KARTINI REACTOR. Bulk shielding is an integrated facility to Kartini reactor which is used for temporary spent fuels storage. The facility is one of the structures, systems and components (SSCs important to safety. Among the safety functions of fuel handling and storage are to prevent any uncontrolable criticality accidents and to limit the fuel temperature increase. Safety analyses should, at least, cover neutronic and thermal hydraulic calculations of the bulk shielding. Thermal hydraulic analyses were intended to ensure that heat removal and the process of the spent fuels cooling takes place adequately and no heat accumulation that challenges the fuel integrity. Validated code, PARET/ANL was used for analysing the

  5. Breast. cancer. Prognosis factors - preliminar study

    International Nuclear Information System (INIS)

    Rotstein, S.; Fonseca, N.M.

    1984-01-01

    A preliminar study of prognosis factors in 8 cases of breast cancer is made. Are used as parameters the dimension, the localization and the nuclear differentiation degree (gN) of the primary tumor, the vascular invasion and the axillary histologic status (pN) and the sinus histiocytosis phenomenon. Among the studied factors, have special importance the presence of vascular invasion and the negative sinus histiocytosis (minimal or absent sinus histiocytosis). Both phenomena are considered as an expression of potential systemic disease, independent of the clinical stage. Consequently the use of chemotherapy in the surgery complementation is preconized, to a best control of the disease. (author)

  6. Dinamiche e persistenza della povertà in Italia: Un’analisi con microdati panel di fonte ECHP

    OpenAIRE

    Francesco Devicienti; Valentina Gualtieri

    2004-01-01

    Questo articolo stima le probabilità di entrare e uscire dallo stato di povertà (poverty dynamics) e la sua persistenza in Italia negli anni ‘90, attingendo dalle fonti longitudinali dello European Community Household Panel, 1994-2001. Combinando le stime dei tassi di uscita con quelli di rientro, l’articolo propone una misura di persistenza che tiene conto degli spell ripetuti in povertà. L’analisi preliminare dei dati mostra che per circa il 46% della popolazione il reddito è al di sotto de...

  7. Genusa Bepu methodologies for the safety analysis of BWRs; Metodologias Bepu de Genusa para el analisis de seguridad de reactores BWR

    Energy Technology Data Exchange (ETDEWEB)

    Trueba, M.; Garcia, J.; Goodson, C.; Ibarra, L.

    2016-08-01

    This article describes the BEPU methodologies developed by General Electric-Hitachi (GEH) for the evaluation of the BWR reactor safety analysis based on the TRACG best-estimate code. These methodologies are applicable to a wide range of events, operational transients (AOO), anticipated transients without scram (ATWS), loss of coolant accidents (LOCA) and instability events; to different BWR types operating commercially. General Electric (GE( designs and other vendors, including Generation III+ESBWR; to the new operation strategies, and to all types of BWR fuel. Their application achieves, among other benefits, a better understanding of the overall plant response and an improvement in margins to the operating limits; thus, the increase of flexibility in reactor operation and reduction in generation costs. (Author)

  8. Analysis of radiological accident emissions of a lead-cooled experimental reactor. LEADER Project; Analisis radiologico de las emisiones en caso de accidente de un reactor experimental refrigerado por plomo. Proyecto LEADER

    Energy Technology Data Exchange (ETDEWEB)

    Gomez Salcedo, F.; Cortes Martin, A.

    2013-07-01

    The LEADER project develops a conceptual level industrial size reactor cooled lead and a demonstration plant of this technology. The project objectives are to define the characteristics and design to installation scale reactor using available technologies and short-term components and assess safety aspects conducting a preliminary analysis of the impact of the facility.

  9. Preliminar plan of a machine for the synchrotron radiation production

    International Nuclear Information System (INIS)

    Moscati, G.; Takahashi, J.; Miyao, Y.

    1985-01-01

    A preliminar plan, with all the technical specifications, for the construction of a machine for the synchrotron radiation production to be done by the National Synchrotron Radiation Laboratory in Brazil is presented. (L.C.) [pt

  10. Analysis CFD for the hydrogen transport in the primary containment of a BWR; Analisis CFD para el transporte de hidrogeno en la contencion primaria de un reactor BWR

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez P, D. A.; Del Valle G, E. [IPN, Escuela Superior de Fisica y Matematicas, Av. IPN s/n, Edificio 9, Col. San Pedro Zacatenco, 07738 Mexico D. F. (Mexico); Gomez T, A. M., E-mail: guerreroazteca_69@hotmail.com [ININ, Departamento de Sistemas Nucleares, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2014-10-15

    This study presents a qualitative and quantitative comparison among the CFD GASFLOW and OpenFOAM codes which are related with the phenomenon of hydrogen transport and other gases in the primary containment of a Boiling Water Reactor (BWR). GASFLOW is a commercial license code that is well validated and that was developed in Germany for the analysis of the gases transport in containments of nuclear reactors. On the other hand, OpenFOAM is an open source code that offers several evaluation solvers for different types of phenomena; in this case, the solver reacting-Foam is used to analyze the hydrogen transport inside the primary containment of the BWR. The results that offer the solver reacting-Foam of OpenFOAM are evaluated in the hydrogen transport calculation and the results are compared with those of the program of commercial license GASFLOW to see if is viable the use of the open source code in the case of the hydrogen transport in the primary containment of a BWR. Of the obtained results so much quantitative as qualitative some differences were identified between both codes, the differences (with a percentage of maximum error of 4%) in the quantitative results are small and they are considered acceptable for this analysis type, also, these differences are attributed mainly to the used transport models, considering that OpenFOAM uses a homogeneous model and GASFLOW uses a heterogeneous model. (Author)

  11. Analysis of the documents about the core envelopment of nuclear reactor at the Laguna Verde U-1 power plant; Analisis de documentos de los materiales de la envolvente del nucleo del reactor nuclear de la CLV U-1

    Energy Technology Data Exchange (ETDEWEB)

    Zamora R, L.; Medina F, A. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1999-07-01

    The degradation of internal components at BWR type reactors is an important subject to consider in the performance availability of the power plant. The Wuergassen nuclear reactor license was confiscated due to the presence of cracking in the core envelopment. In consequence it is necessary carrying out a detailed study with the purpose to avoid these problems in the future. This report presents a review and analysis of documents and technical information referring to the core envelopment of a BWR/5/6 and the Laguna Verde Unit 1 nuclear reactor in Mexico. In this document are presented design data, documents about fabrication processes, and manufacturing of core envelopment. (Author)

  12. Adaptation and implementation of the TRACE code for transient analysis in designs lead cooled fast reactors; Adaptacion y aplicacion del codigo TRACE para el analisis de transitorios en disenos de reactores rapidos refrigerados por plomo

    Energy Technology Data Exchange (ETDEWEB)

    Lazaro, A.; Ammirabile, L.; Martorell, S.

    2015-07-01

    Lead-Cooled Fast Reactor (LFR) has been identified as one of promising future reactor concepts in the technology road map of the Generation IVC International Forum (GIF)as well as in the Deployment Strategy of the European Sustainable Nuclear Industrial Initiative (ESNII), both aiming at improved sustainability, enhanced safety, economic competitiveness, and proliferation resistance. This new nuclear reactor concept requires the development of computational tools to be applied in design and safety assessments to confirm improved inherent and passive safety features of this design. One approach to this issue is to modify the current computational codes developed for the simulation of Light Water Reactors towards their applicability for the new designs. This paper reports on the performed modifications of the TRACE system code to make it applicable to LFR safety assessments. The capabilities of the modified code are demonstrated on series of benchmark exercises performed versus other safety analysis codes. (Author)

  13. Economical analysis to utilize MTR fuel elements using silicides in research reactors; Analisis economico sobre el uso de elementos combustibles MTR a base de siliciuros en reactores de investigacion

    Energy Technology Data Exchange (ETDEWEB)

    Bergallo, Juan E; Novara, Oscar E; Adelfang, Pablo [Comision Nacional de Energia Atomica, General San Martin (Argentina). Dept. de Combustibles Nucleares

    2000-07-01

    According to international programs on reducing enrichment in research reactors and the necessity to maintain their operation, new fuel elements have been developed in order to meet both objectives. Thus, U-Si alloy fuel elements for research reactors are becoming of greater interest for the international markets. It became necessary to make an economic study about the convenience of introducing this type of fuel elements in the RA-3 reactor and to know the potentiality of this fuel. The economical behavior of the reactor operation has been evaluated comparing the actual U{sub 3}O{sub 8} nuclear fuel cycle with U{sub 3}Si{sub 2} nuclear fuels. Results obtained show that the main economical factor to determine the change of fuels is the cost of fabrication, and the change is advisable up to an 80% difference. The other factors related to the cost of nuclear fuel cycle are not relevant or have real minor impacts. (author)

  14. Reactor

    International Nuclear Information System (INIS)

    Toyama, Masahiro; Kasai, Shigeo.

    1978-01-01

    Purpose: To provide a lmfbr type reactor wherein effusion of coolants through a loop contact portion is reduced even when fuel assemblies float up, and misloading of reactor core constituting elements is prevented thereby improving the reactor safety. Constitution: The reactor core constituents are secured in the reactor by utilizing the differential pressure between the high-pressure cooling chamber and low-pressure cooling chamber. A resistance port is formed at the upper part of a connecting pipe, and which is connect the low-pressure cooling chamber and the lower surface of the reactor core constituent. This resistance part is formed such that the internal sectional area of the connecting pipe is made larger stepwise toward the upper part, and the cylinder is formed larger so that it profiles the inner surface of the connecting pipe. (Aizawa, K.)

  15. Reactor

    International Nuclear Information System (INIS)

    Ikeda, Masaomi; Kashimura, Kazuo; Inoue, Kazuyuki; Nishioka, Kazuya.

    1979-01-01

    Purpose: To facilitate the construction of a reactor containment building, whereby the inspections of the outer wall of a reactor container after the completion of the construction of the reactor building can be easily carried out. Constitution: In a reactor accommodated in a container encircled by a building wall, a space is provided between the container and the building wall encircling the container, and a metal wall is provided in the space so that it is fitted in the building wall in an attachable or detatchable manner. (Aizawa, K.)

  16. Qualification of the WIMS lattice code, for the design, operation and accident analysis of nuclear reactors; Calificacion del programa WIMS de calculo neutronico para diseno, seguimiento de operacion y analisis de accidentes de reactores nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Lerner, A M [Ente Nacional Regulador Nuclear, Buenos Aires (Argentina)

    1997-12-31

    A basic problem in nuclear reactor physics in that of the description of the neutron population behaviour in the multiplicative medium of a nuclear fuel. Due to the magnitude of the physical problem involved and the present degree of technological evolution regarding computing resources, of increasing complexity and possibilities, the calculation programs or codes have turned to be a basic auxiliary tool in reactor physics. In order to analyze the global problem, several aspects should be taken into consideration. The first aspect to be considered is that of the availability of the necessary nuclear data. The second one is the existence of a variety of methods and models to perform the calculations. The final phase for this kind of analysis is the qualification of the computing programs to be used, i.e. the verification of the validity domain of its nuclear data and the models involved. The last one is an essential phase, and in order to carry it on great variety of calculations are required, that will check the different aspects contained in the code. We here analyze the most important physical processes that take place in a nuclear reactor cell, and we consider the qualification of the lattice code WIMS, that calculates the neutronic parameters associated with such processes. Particular emphasis has been put in the application to natural uranium fuelled reactor, heavy water cooled and moderated, as the Argentinean power reactors now in operation. A wide set of experiments has been chosen: a.-Fresh fuel in zero-power experimental facilities and power reactors; b.-Irradiated fuel in both types of facilities; c.-Benchmark (prototype) experiments with loss of coolant. From the whole analysis it was concluded that for the research reactors, as well as for the heavy water moderated power reactors presently operating in our country, or those that could operate in a near future, the lattice code WIMS is reliable and produces results within the experimental values and

  17. Determination of nitrogen in wheat flour through Activation analysis using Fast neutron flux of a Thermal nuclear reactor; Determinacion de nitrogeno en harina de trigo mediante analisis por activacion empleando el flujo de neutrones rapidos de un reactor nuclear termico

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez G, T

    1976-07-01

    In this work is done a technical study for determining Nitrogen (protein) and other elements in wheat flour Activation analysis, with Fast neutrons from a Thermal nuclear reactor. Initially it is given an introduction about the basic principles of the methods of analysis. Equipment used in Activation analysis and a brief description of the neutron source (Thermal nuclear reactor). The realized experiments for determining the flux form in the irradiation site, the half life of N-13 and the interferences due to the sample composition are included too. Finally, the obtained results by Activation and the Kjeldahl method are tabulated. (Author)

  18. Core reactor simulation of the Central Laguna Verde (CLV) reactor in stationary state and an example of the application in the recharge options analysis of cycle 3; Simulacion del nucleo del reactor de la Central Laguna Verde (CLV) en estado estacionario y ejemplo de aplicacion en el analisis de alternativas de recarga del ciclo 3

    Energy Technology Data Exchange (ETDEWEB)

    Ocampo Mansilla, Hector; Francois Lacouture, Juan Luis; Blanco Lara, Jesus; Cortes Campos, Carlos Cristobal; Esquivias Montoya, Jesus; Esquivel Torres, Jose Luis; Martin del Campo Marquez, Cecilia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Montes Tadeo, Jose Luis [Instituto Nacional de Investigaciones Nucleares (ININ), Salazar (Mexico); Sanchez Herrera, Luciano; Torres Alvarez, Carlos [Comision Federal de Electricidad (CFE), Mexico, D. F. (Mexico)

    1991-12-31

    The results are presented of a study requested by Comision Federal de Electricidad (CFE) for the analysis of Cycle 3, of Unit No. 1 of the Laguna Verde Nuclear Power Station (CLNV) and determine the burning effect impact, carried out with the starting tests and the operation of Cycles 1 and 2 on base of the cycle extension known as coastdown. The calculations were realized with the Code Package FMS for fuel managing, using the Code PRESTO-B that analyzes the reactor in detailed form in three dimensions an in stationary state. In the study the schemes of fraction of recharge proposed by General Electric (GE) were analyzed with the effect of cycle extension. The initial design value of 100 assemblies for Cycle 3, GE proposes to increase such fraction from 112 to 120 assemblies. This impacts the cost of the second recharge and the purpose of this investigation is to analyze options with higher fuel enrichment in U-235 to minimize the number of assemblies in this recharge. The analyses effected show that the designs proposed by GE do not fulfill the required energy proposed for the cycle, even using in the recharge only fuel with 3.03% of enrichment. It is proposed, likewise, the fuel enrichment up to 3.25% to satisfy the energy demand with a minimum of assemblies. [Espanol] Se presentan los resultados de un estudio solicitado por la Comision Federal de Electricidad (CFE) para analizar el ciclo 3, de la unidad 1 de la Central Laguna Verde (CLV), y determinar el impacto del efecto de quemado llevado a cabo con las pruebas de arranque y por la operacion de los ciclos 1 y 2 con base en la tecnica de alargamiento del ciclo conocida como coastdown1. Los calculos se realizaron con el paquete de codigos FMS para la administracion de combustible, usando el codigo PRESTO-B que analiza el reactor en forma detallada en tres dimensiones y en estado estacionario. Se analizaron en el estudio los esquemas de fraccion de recarga propuesta por la General Electric (GE) con el efecto de

  19. Core reactor simulation of the Central Laguna Verde (CLV) reactor in stationary state and an example of the application in the recharge options analysis of cycle 3; Simulacion del nucleo del reactor de la Central Laguna Verde (CLV) en estado estacionario y ejemplo de aplicacion en el analisis de alternativas de recarga del ciclo 3

    Energy Technology Data Exchange (ETDEWEB)

    Ocampo Mansilla, Hector; Francois Lacouture, Juan Luis; Blanco Lara, Jesus; Cortes Campos, Carlos Cristobal; Esquivias Montoya, Jesus; Esquivel Torres, Jose Luis; Martin del Campo Marquez, Cecilia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Montes Tadeo, Jose Luis [Instituto Nacional de Investigaciones Nucleares (ININ), Salazar (Mexico); Sanchez Herrera, Luciano; Torres Alvarez, Carlos [Comision Federal de Electricidad (CFE), Mexico, D. F. (Mexico)

    1992-12-31

    The results are presented of a study requested by Comision Federal de Electricidad (CFE) for the analysis of Cycle 3, of Unit No. 1 of the Laguna Verde Nuclear Power Station (CLNV) and determine the burning effect impact, carried out with the starting tests and the operation of Cycles 1 and 2 on base of the cycle extension known as coastdown. The calculations were realized with the Code Package FMS for fuel managing, using the Code PRESTO-B that analyzes the reactor in detailed form in three dimensions an in stationary state. In the study the schemes of fraction of recharge proposed by General Electric (GE) were analyzed with the effect of cycle extension. The initial design value of 100 assemblies for Cycle 3, GE proposes to increase such fraction from 112 to 120 assemblies. This impacts the cost of the second recharge and the purpose of this investigation is to analyze options with higher fuel enrichment in U-235 to minimize the number of assemblies in this recharge. The analyses effected show that the designs proposed by GE do not fulfill the required energy proposed for the cycle, even using in the recharge only fuel with 3.03% of enrichment. It is proposed, likewise, the fuel enrichment up to 3.25% to satisfy the energy demand with a minimum of assemblies. [Espanol] Se presentan los resultados de un estudio solicitado por la Comision Federal de Electricidad (CFE) para analizar el ciclo 3, de la unidad 1 de la Central Laguna Verde (CLV), y determinar el impacto del efecto de quemado llevado a cabo con las pruebas de arranque y por la operacion de los ciclos 1 y 2 con base en la tecnica de alargamiento del ciclo conocida como coastdown1. Los calculos se realizaron con el paquete de codigos FMS para la administracion de combustible, usando el codigo PRESTO-B que analiza el reactor en forma detallada en tres dimensiones y en estado estacionario. Se analizaron en el estudio los esquemas de fraccion de recarga propuesta por la General Electric (GE) con el efecto de

  20. Sargent-IV Project. Development of new methodologies for safety analysis of Generation IV reactors; Proyecto SARGEB-IV. Desarrollo de nuevas metodologias de analisis de seguridad para reactores de Generacion IV

    Energy Technology Data Exchange (ETDEWEB)

    Queral, C.; Gallego, E.; Jimenez, G.

    2013-07-01

    The main result of this paper is the proposal for the addition of new ingredients in the safety analysis methodologies for Generation-IV reactors that integrates the features of probabilistic safety analysis within deterministic. This ensures a higher degree of integration between the classical deterministic and probabilistic methodologies.

  1. Application of the integrated analysis of safety (IAS) to sequences of Total loss of feed water in a PWR Reactor; Aplicacion del Analisis Integrado de Seguridad (ISA) a Secuencias de Perdidas Total de Agua de Alimentacion en un Reactor PWR

    Energy Technology Data Exchange (ETDEWEB)

    Moreno Chamorro, P.; Gallego Diaz, C.

    2011-07-01

    The main objective of this work is to show the current status of the implementation of integrated analysis of safety (IAS) methodology and its SCAIS associated tool (system of simulation codes for IAS) to the sequence analysis of total loss of feedwater in a PWR reactor model Westinghouse of three loops with large, dry containment.

  2. ANALISIS PRELIMINARES DE UN FELDESPATO PARA SU CERTIFICACIÓN COMO MATERIAL DE REFERENCIA

    OpenAIRE

    Lizeth Mendoza Sánchez; Edith Zapata Campos; Florianne Castillo Borja

    2010-01-01

    En este trabajo se presentan los análisis cualitativos y semi-cuantitativos aplicados a un feldespato candidato a MRC (material certificado de referencia) para la industria del vidrio. Los elementos que se encontraron por medio de FRX (espectrometría de fluorescencia de rayos X) en el feldespato son Mg, Na, Fe, K, Ti, Zr, Al y Si. El análisis cualitativo por medio de difracción de rayos X demostró que el 81.6% del material analizado correspondía a un feldespato compuesto por sodio y potasio p...

  3. ANALISIS PRELIMINARES DE UN FELDESPATO PARA SU CERTIFICACIÓN COMO MATERIAL DE REFERENCIA

    Directory of Open Access Journals (Sweden)

    Lizeth Mendoza Sánchez

    2010-01-01

    Full Text Available En este trabajo se presentan los análisis cualitativos y semi-cuantitativos aplicados a un feldespato candidato a MRC (material certificado de referencia para la industria del vidrio. Los elementos que se encontraron por medio de FRX (espectrometría de fluorescencia de rayos X en el feldespato son Mg, Na, Fe, K, Ti, Zr, Al y Si. El análisis cualitativo por medio de difracción de rayos X demostró que el 81.6% del material analizado correspondía a un feldespato compuesto por sodio y potasio principalmente. Los análisis de homogeneidad física y química mostraron que el material era homogéneo con un tamaño de partícula no mayor a 63 μm y que todos los elementos de interés son homogéneos en muestras de 4 g.

  4. Progetto NERIES: analisi preliminare dei dati della prima campagna OBS nello Ionio meridionale

    OpenAIRE

    D'Anna, G.; D'Alessandro, A.; Mangano, G.; Amato, A.; Piana Agostinetti, N.; Selvaggi, G.

    2008-01-01

    La definizione di un modello crostale per l’area dello Ionio è di fondamentale importanza per la comprensione dell’evoluzione geodinamica del Mediterraneo. Anche se quasi tutti gli autori concordano nel ritenere la crosta del Mar Ionio assimilabile a una crosta oceanica matura (De Voogd et al., 1992, Catalano et al., 2001; Finetti e Del Ben, 2005; Argnani, 2005), esistono tuttavia ipotesi alternative (Farrugia and Panza, 1981; Ismail-Zadeh et al., 1998..) e rimangono da chiarir...

  5. Preliminary results of the evaluation of the Wind power resource in several sites of the state of Zacatecas; Resultados preliminares de la evaluacion del recurso eolico en varios sitios del estado de Zacatecas

    Energy Technology Data Exchange (ETDEWEB)

    Reta, Manuel; Soto, Cristian; De la Torre, Jorge; Ibarra, Salvador; Alvarez, Jose; Romo, Guillermo; Banuelos, Francisco; Ochoa, Carlos; Martinez, Antonio; Aguilar, Efrain; Medina Garcia, G; Rumayor R, A.F. (Mexico)

    2009-07-15

    The present article shows the preliminary results of the analysis of wind power monitoring of fifteen agro-climatic stations 3 m high, of Instituto Nacional de Investigationes Forestales, Agricolas y Pecuarias of Zacatecas state. The preliminary analysis of the available data of wind velocity allows to extrapolate values at 10 m and 30 m of high in each one of the measured sites, and to evaluate the Wind potential, in W/m{sup 2}, at 30 m high. These results will allow selecting the best sites for the collection of wind power generators of medium and low scale for the possible development of wind farms in rural zones not connected to the national power network. [Spanish] El presente articulo muestra los resultados preliminares del analisis de monitoreo eolico de quince estaciones agroclimaticas a 3 m de altura, del Instituto Nacional de Investigaciones Forestales Agricolas y Pecuarias (INIFAP), distribuidas en el estado de Zacatecas. El analisis preliminar de los datos disponibles de velocidad de viento permite extrapolar valores a 10 m y 30 m de altura en cada uno de los sitios medidos, y a evaluar el potencial eolico, en W/m{sup 2}, a 30 m de altura. Estos resultados permitiran seleccionar los mejores sitios para la coleccion de aerogeneradores de mediana y baja escala para el posible desarrollo de granjas eolicas en zonas rurales desconectadas de la red electrica nacional.

  6. Comparative analysis of results between CASMO, MCNP and Serpent for a suite of Benchmark problems on BWR reactors; Analisis comparativo de resultados entre CASMO, MCNP y SERPENT para una suite de problemas Benchmark en reactores BWR

    Energy Technology Data Exchange (ETDEWEB)

    Xolocostli M, J. V.; Vargas E, S.; Gomez T, A. M. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Reyes F, M. del C.; Del Valle G, E., E-mail: vicente.xolocostli@inin.gob.mx [IPN, Escuela Superior de Fisica y Matematicas, UP - Adolfo Lopez Mateos, Edif. 9, 07738 Mexico D. F. (Mexico)

    2014-10-15

    In this paper a comparison is made in analyzing the suite of Benchmark problems for reactors type BWR between CASMO-4, MCNP6 and Serpent code. The Benchmark problem consists of two different geometries: a fuel cell of a pin and assembly type BWR. To facilitate the study of reactors physics in the fuel pin their nuclear characteristics are provided to detail, such as burnt dependence, the reactivity of selected nuclide, etc. With respect to the fuel assembly, the presented results are regarding to infinite multiplication factor for burning different steps and different vacuum conditions. Making the analysis of this set of Benchmark problems provides comprehensive test problems for the next fuels generation of BWR reactors with high extended burned. It is important to note that when making this comparison the purpose is to validate the methodologies used in modeling for different operating conditions, if the case is of other BWR assembly. The results will be within a range with some uncertainty, considering that does not depend on code that is used. Escuela Superior de Fisica y Matematicas of Instituto Politecnico Nacional (IPN (Mexico) has accumulated some experience in using Serpent, due to the potential of this code over other commercial codes such as CASMO and MCNP. The obtained results for the infinite multiplication factor are encouraging and motivate the studies to continue with the generation of the X S of a core to a next step a respective nuclear data library is constructed and this can be used by codes developed as part of the development project of the Mexican Analysis Platform of Nuclear Reactors AZTLAN. (Author)

  7. Connected analysis nuclear-thermo-hydraulic of parallel channels of a BWR reactor using distributed computation; Analisis acoplado nuclear-termohidraulico de canales paralelos de un reactor BWR empleando computacion distribuida

    Energy Technology Data Exchange (ETDEWEB)

    Campos Gonzalez, Rina Margarita

    2007-07-15

    This work consists of the integration of three models previously developed which are described widely in Literature: model of the thermo-hydraulic channel, model of the modal neutronic and the model of the recirculation bows. The tool used for this connection of models is the PVM system, Parallel Virtual Machine that allowed paralleling the model by means of the concept of distributed computation. The purpose of making this connection of models is the one of obtaining a more complete tool than better represents the real configuration and the phenomenology of the nucleus of a BWR reactor, thus obtaining better results. In addition to maintaining the flexibility to improve the resulting model at any time, since the very complex or sophisticated models are difficult to improve being impossible to modify the equations they use and can include variables that are not of primary importance in the tackled problem or that mask relations among variables due to the excess of results. Also maintaining the flexibility for adding component of models or systems of the BWR reactor, all of this following the modeling needs. The Swedish Ringhals power plant was chosen to characterize the resulting connected model for counting on a Stability Benchmark that offers the opportunity to count on real plant data. Besides that in case 9 of cycle 14 of this Benchamark oscillations outside phase appeared, which are from great interest because the detection systems that register the average of the power of the nucleus do not detect them. Additionally in this work the model of the recirculation bows as an independent module is obtained in an individual way, since this model belongs to another work and works connected to the reactor vessel. The model of the recirculation bows is able to model several transients of interest, as it is shown in the Appendix A of this work, among which are found the tripping of recirculation pumps or the transference at low or high velocity of them. The scope of the

  8. Estudos preliminares com bromoacetamida, um novo moluscicida

    Directory of Open Access Journals (Sweden)

    Naftale Katz

    1985-09-01

    Full Text Available A bromoacetamida tem sido testada como moluscicida na República Popular da China, para tratamento de criadouros de Oncomelania, hospedeiro do Schistosoma japonicum, com bons resultados. O produto é solúvel em água, o que simplifica seu uso. Foram feitos ensaios biológicos preliminares deste produto em caramujos adultos (Biomphalaria glabrata, B. tenagophila e B. straminea, recém-eclodidos e desovas. Paralelamente foram feitos ensaios com o pentaclorofenol para avaliar a suscetibilidade dos caramujos. O produto foi testado também sobre peixes, Lebistes reticulatus. Os moluscos testados mediam 8-10 mm de diâmetro; os recém-eclodidos tinham 1-3 dias de idade e as desovas 0-1 dia de idade. A temperatura da água durante os experimentos variou de 24,3 a 27,0°C. O produto foi ativo para caramujos adultos, recém-eclodidos e desovas, em concentrações em tomo de 1 a 4 ppm. Para os peixes o produto foi menos tóxico do que para os caramujos (CLço 7,5 ppm. Estes resultados indicam que a bromoacetamida apresenta propriedades moluscicidas promissoras para o controle da Biomphalaria spp.

  9. Capture programs, analysis, data graphication for the study of the thermometry of the TRIGA Mark III reactor core; Programas de captura, analisis y graficado de datos para el estudio de la termometria del nucleo del reactor TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Paredes G, L.C

    1991-05-15

    This document covers the explanation of the capture programs, analysis and graphs of the data obtained during the measurement of the temperatures of the instrumented fuel element of the TRIGA Mark III reactor and of the coolant one near to this fuel, using the conversion card from Analogic to Digital of 'Data Translation', and using a signal conditioner for five temperature measurers with the help of thermo par type K, developed by the Simulation and Control of the nuclear systems management department, which gives a signal from 0 to 10 Vcd for an interval of temperature of 0 to 1000 C. (Author)

  10. Adaptation and implementation of the TRACE code for transient analysis on designs of cooled lead fast reactors; Adaptacion y aplicacion del codigo TRACE para el analisis de transitorios en disenos de reactores rapidos refrigerados por plomo

    Energy Technology Data Exchange (ETDEWEB)

    Lazaro, A.; Ammirabile, L.; Martorell, S.

    2014-07-01

    The article describes the changes implemented in the TRACE code to include thermodynamic tables of liquid lead drawn from experimental results. He then explains the process for developing a thermohydraulic model for the prototype ALFRED and analysis of a selection of representative transient conducted within the framework of international research projects. The study demonstrates the applicability of TRACE code to simulate designs of cooled lead fast reactors and exposes the high safety margins are there in this technology to accommodate the most severe transients identified in their security study. (Author)

  11. Definition and Analysis of Heavy Water Reactor Benchmarks for Testing New Wims-D Libraries; Definicion y Analisis de Benchmarks de Reactores de Agua Pesada para Pruebas de Nuevas Bibliotecas de Datos Wims-D

    Energy Technology Data Exchange (ETDEWEB)

    Leszczynski, Francisco [Comision Nacional de Energia Atomica, Centro Atomico Bariloche (Argentina)

    2000-07-01

    This work is part of the IAEA-WIMS Library Update Project (WLUP). A group of heavy water reactor benchmarks have been selected for testing new WIMS-D libraries, including calculations with WIMSD5B program and the analysis of results.These benchmarks cover a wide variety of reactors and conditions, from fresh fuels to high burnup, and from natural to enriched uranium.Besides, each benchmark includes variations in lattice pitch and in coolants (normally heavy water and void).Multiplication factors with critical experimental bucklings and other parameters are calculated and compared with experimental reference values.The WIMS libraries used for the calculations were generated with basic data from JEF-2.2 Rev.3 (JEF) and ENDF/B-VI iNReleaseln 5 (E6) Results obtained with WIMS-86 (W86) library, included with WIMSD5B package, from Windfrith, UK with adjusted data, are included also, for showing the improvements obtained with the new -not adjusted- libraries.The calculations with WIMSD5B were made with two methods (input program options): PIJ (two-dimension collision probability method) and DSN (one-dimension Sn method, with homogenization of materials by ring).The general conclusions are: the library based on JEF data and the DSN meted give the best results, that in average are acceptable.

  12. Analysis of the thorium inclusion in the fuel of a fast reactor cooled by lead; Analisis de la inclusion de torio en el combustible de un reactor rapido enfriado por plomo

    Energy Technology Data Exchange (ETDEWEB)

    Juarez M, L. C.; Francois L, J. L., E-mail: lcjm@ier.unam.mx [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac 8532, Col. Progreso, 62550 Jiutepec, Morelos (Mexico)

    2017-09-15

    In the present work, we first verified a model of the European reactor cooled with lead (ELFR). The calculations were made with the code Monte Carlo serpent 2.27 and the library of cross sections Jeff-3.1. For this verification, three neutron parameters were compared: the evolution of the neutron multiplication factor, the Doppler constant and the effect of the vacuum fraction of the refrigerant, obtaining a good approximation with the reference values. Subsequently, the inclusion of thorium as a fertile material within the fuel was analyzed and the same neutron parameters were compared with the original fuel. The evolution of criticality for the case of thorium fuel differs significantly with respect to that of the original fuel (without thorium); this is due mainly to the breeding of the fissile isotope {sup 233}U. Therefore, is possible to have a longer fuel cycle, favoring the availability factor of the plant, without compromising the performance of the reactor since both the Doppler constant and the effect of the vacuum fraction of the refrigerant show a similar tendency to those of the original fuel, being negative in both cases. (Author)

  13. Analysis of the accident at Fukushima Daiichi nuclear power plant in an A BWR reactor; Analisis del accidente de la planta nucleoelectrica de Fukushima Daiichi en un reactor tipo ABWR

    Energy Technology Data Exchange (ETDEWEB)

    Escorcia O, D. [UNAM, Facultad de Ingenieria, Ciudad Universitaria, 04510 Ciudad de Mexico (Mexico); Salazar S, E., E-mail: daniel.escorcia.ortiz@gmail.com [UNAM, Facultad de Ingenieria, Laboratorio de Analisis en Ingenieria de Reactores Nucleares, 62250 Jiutepec, Morelos (Mexico)

    2016-09-15

    The present work aims to recreate the accident occurred at the Fukushima Daiichi nuclear power plant in Japan on March 11, 2011, making use of an academic simulator of forced circulation of the A BWR reactor provided by the IAEA to know the scope of this simulator. The simulator was developed and distributed by the IAEA for academic purposes and contains the characteristics and general elements of this reactor to be able to simulate transients and failures of different types, allowing also to observe the general behavior of the reactor, as well as several phenomena and present systems in the same. Is an educational tool of great value, but it does not have a scope that allows the training of plant operators. To recreate the conditions of the Fukushima accident in the simulator, we first have to know what events led to this accident, as well as the actions taken by operators and managers to reduce the consequences of this accident; and the sequence of events that occurred during the course of the accident. Differences in the nuclear power plant behavior are observed and interpreted throughout the simulation, since the Fukushima plant technology and the simulator technology are not the same, although they have several elements in common. The Fukushima plant had an event that by far exceeded the design basis, which triggered in an accident that occurred in the first place by a total loss of power supply, followed by the loss of cooling systems, causing a level too high in temperature, melting the core and damaging the containment accordingly, allowing the escape of hydrogen and radioactive material. As a result of the simulation, was determined that the scope of the IAEA academic simulator reaches the entrance of the emergency equipment, so is able to simulate almost all the events occurred at the time of the earthquake and the arrival of the tsunami in the nuclear power plant of Fukushima Daiichi. However, due to its characteristics, is not able to simulate later

  14. Sensitiveness Analysis of Neutronic Parameters Due to Uncertainty in Thermo-hydraulic parameters on CAREM-25 Reactor; Analisis de Sensibilidad de los Parametros Neutronicos ante Incertezas en los Parametros Termohidraulicos en el Reactor CAREM-25

    Energy Technology Data Exchange (ETDEWEB)

    Serra, Oscar [Comision Nacional de Energia Atomica, Centro Atomico Bariloche (Argentina)

    2000-07-01

    Some studies were done about the effect of the uncertainty in the values of several thermo-hydraulic parameters on the core behaviour of the CAREM-25 reactor.By using the chain codes CITVAP-THERMIT and the perturbation the reference states, it was found that concerning to the total power, the effects were not very important, but were much bigger for the pressure.Furthermore were hardly significant in the presence of any perturbation on the void fraction calculation and the fuel temperature.The reactivity and the power peaking factor had highly important changes in the case of the coolant flow.We conclude that the use of this procedure is adequate and useful to our purpose.

  15. Analysis of an accident type sbloca in reactor contention AP1000 with 8.0 Gothic code; Analisis de un accidente tipo Sbloca en la contencion del reactor AP1000 con el codigo Gothic 8.0

    Energy Technology Data Exchange (ETDEWEB)

    Goni, Z.; Jimenez Varas, G.; Fernandez, K.; Queral, C.; Montero, J.

    2016-08-01

    The analysis is based on the simulation of a Small Break Loss-of-Coolant-Accident in the AP1000 nuclear reactor using a Gothic 8.0 tri dimensional model created in the Science and Technology Group of Nuclear Fision Advanced Systems of the UPM. The SBLOCA has been simulated with TRACE 5.0 code. The main purpose of this work is the study of the thermo-hydraulic behaviour of the AP1000 containment during a SBLOCA. The transients simulated reveal close results to the realistic behaviour in case of an accident with similar characteristics. The pressure and temperature evolution enables the identification of the accident phases from the RCS point of view. Compared to the licensing calculations included in the AP1000 Safety Analysis, it has been proved that the average pressure and temperature evolution is similar, yet lower than the licensing calculations. However, the temperature and inventory distribution are significantly heterogeneous. (Author)

  16. MCTP, a code for the thermo-mechanical analysis of a fuel rod of BWR type reactors (Neutron part); MCTP, un codigo para el analisis termo-mecanico de una barra combustible de reactores tipo BWR (Parte Neutronica)

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez L, H; Ortiz V, J [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2003-07-01

    In the National Institute of Nuclear Research of Mexico a code for the thermo-mechanical analysis of the fuel rods of the BWR type reactors of the Nucleo electric Central of Laguna Verde is developed. The code solves the diffusion equation in cylindrical coordinates with several energy groups. The code, likewise, calculates the temperature distribution and power distribution in those fuel rods. The code is denominated Multi groups With Temperatures and Power (MCTP). In the code, the energy with which the fission neutrons are emitted it is divided in six groups. They are also considered the produced perturbations by the changes in the temperatures of the materials that constitute the fuel rods, the content of fission products, the uranium consumption and in its case the gadolinium, as well as the plutonium production. In this work there are present preliminary results obtained with the code, using data of operation of the Nucleo electric Central of Laguna Verde. (Author)

  17. Effects of generation and optimization of libraries of effective sections in the analysis of transient in PWR reactors; Efectos de generacion y optimizacion de librerias de secciones eficaces en el analisis de transitorios en reactores PWR

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez-Cervera, S.; Garcia Herranz, N.; Cuervo, D.; Ahnert, C.

    2014-07-01

    In this paper evaluates the impact that has a certain mesh on a transient in a PWR reactor in the expulsion of a control bar. Have been used for this purpose the coupled codes neutronic and Thermo-hydraulic COBAYA3/COBRA-TF. This objective has been chosen the OECD/NEA PWR MOX/UO{sub 2} rod ejection transient benchmark provides isotopic compositions and defined geometric configurations that allow the use of codes lattice to generate own bookstores. The code used for this transport has been the code APOLLO2.8. The results show large discrepancies when using the benchmark library or libraries own by comparing them to the other participants solutions. The source of these discrepancies is the nodal effective sections provided in the benchmark. (Author)

  18. Stability analysis of a recycling circuit of a BWR type reactor. Theoretical study; Analisis de estabilidad de un circuito de recirculacion de un reactor del tipo BWR. Estudio teorico

    Energy Technology Data Exchange (ETDEWEB)

    Salinas H, J.G.; Espinosa P, G. [Universidad Autonoma Metropolitana-Iztapalapa, 09000 Mexico D.F. (Mexico); Gonzalez M, V.M. [Comision Nacional de Seguridad Nuclear y Salvaguardias, 04000 Mexico D.F. (Mexico)

    2000-07-01

    The Technology, Regulation and Services Management of the National Commission of Nuclear Safety and Safeguards financed and in coordinate form with the I.P.H. Department of the Metropolitan Autonomous-Iztapalapa University developed the present project with the purpose of studying the effect of the recycling system on the linear stability of a BWR reactor whose reference central is the Laguna Verde power station. The present project forms part of a work series focused to the linear stability of the nuclear reactor of the Unit 1 at Laguna Verde power station. The components of the recycling system considered for the study of stability are the recycling external circuit (recycling pumps, valves) and the internal circuit (downcomer, jet pumps, lower full, driers, separators). The mathematical model is obtained applying mass balances and movement quantity in each one of the mentioned circuits. With respect to the nucleus model two regions are considered, the first one is made of a flow in one phase and the second one of a flow in two phases. For modelling the biphasic region it is considered homogenous flow. Generally it is studied the system behavior in the frequency domain starting from the transfer function applied to four operational states which correspond to the lower stability zone in the map power-flow of the Unit 1 of Laguna Verde power station. The Nyquist diagrams corresponding to each state as well as their characteristic frequency were determined. The results show that exists a very clear dependence of the power-flow relation on the stability of the system. It was found that the boiling length is an important parameter for the linear stability of the system. The obtained results show that the characteristic frequencies in unstability zones are similar to the reported data of the Unit 1 of the Laguna Verde power station in the event of power oscillations carried out in January 1995. (Author)

  19. Guía del Operador del Molino Preliminar -- 2009

    Science.gov (United States)

    Jan Wiedenbeck; Philip H. Mitchell; Bobby Ammerman; Daniel Saloni

    2009-01-01

    Los fabricantes de productos de madera requieren de una recuperación eficiente de los productos de la madera para que el negocio se mantenga lucrativo. La habilidad de una compañía para obtener el mayor rendimiento en las operaciones de corte de madera (e.g. Molino preliminar) puede variar de acuerdo a la material prima, productos, equipo de...

  20. Cuestionario de rasgos de personalidad obsesiva (CRPO): resultados preliminares

    OpenAIRE

    Vallejo Ruiloba, Julio; Marcos, Teodor; Salamero, Manel

    1996-01-01

    Se presentan los resultados preliminares del cuestionario de rasgos de personalidad obsesiva (CRPO) en tres muestras de población (pacientes obsesivos, pacientes depresivos con melancolía y controles sanos). cuestionario, de 31 ítems, ha demostrado ser útil y válido para discriminar el trastorno obsesivo-compulsivo personalidad.

  1. Reactors

    DEFF Research Database (Denmark)

    Shah, Vivek; Vaz Salles, Marcos António

    2018-01-01

    The requirements for OLTP database systems are becoming ever more demanding. Domains such as finance and computer games increasingly mandate that developers be able to encode complex application logic and control transaction latencies in in-memory databases. At the same time, infrastructure...... engineers in these domains need to experiment with and deploy OLTP database architectures that ensure application scalability and maximize resource utilization in modern machines. In this paper, we propose a relational actor programming model for in-memory databases as a novel, holistic approach towards......-level function calls. In contrast to classic transactional models, however, reactors allow developers to take advantage of intra-transaction parallelism and state encapsulation in their applications to reduce latency and improve locality. Moreover, reactors enable a new degree of flexibility in database...

  2. Advances in the development of the Mexican platform for analysis and design of nuclear reactors: AZTLAN Platform; Avances en el desarrollo de la plataforma mexicana para analisis y diseno de reactores nucleares: AZTLAN Platform

    Energy Technology Data Exchange (ETDEWEB)

    Gomez T, A. M.; Puente E, F. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Del Valle G, E. [IPN, Escuela Superior de Fisica y Matematicas, Av. IPN s/n, 07738 Ciudad de Mexico (Mexico); Francois L, J. L. [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac 8532, Col. Progreso, 62550 Jiutepec, Morelos (Mexico); Espinosa P, G., E-mail: armando.gomez@inin.gob.mx [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Av. San Rafael Atlixco 186, Col. Vicentina, 09340 Ciudad de Mexico (Mexico)

    2017-09-15

    The AZTLAN platform project: development of a Mexican platform for the analysis and design of nuclear reactors, financed by the SENER-CONACYT Energy Sustain ability Fund, was approved in early 2014 and formally began at the end of that year. It is a national project led by the Instituto Nacional de Investigaciones Nucleares (ININ) and with the collaboration of Instituto Politecnico Nacional (IPN), the Universidad Autonoma Metropolitana (UAM) and Universidad Nacional Autonoma de Mexico (UNAM) as part of the development team and with the participation of the Laguna Verde Nuclear Power Plant, the National Commission of Nuclear Safety and Safeguards, the Ministry of Energy and the Karlsruhe Institute of Technology (Kit, Germany) as part of the user group. The general objective of the project is to modernize, improve and integrate the neutronic, thermo-hydraulic and thermo-mechanical codes, developed in Mexican institutions, in an integrated platform, developed and maintained by Mexican experts for the benefit of Mexican institutions. Two years into the process, important steps have been taken that have consolidated the platform. The main results of these first two years have been presented in different national and international forums. In this congress, some of the most recent results that have been implemented in the platform codes are shown in more detail. The current status of the platform from a more executive view point is summarized in this paper. (Author)

  3. Test reactors in the world

    International Nuclear Information System (INIS)

    Corella, M.R.; Gomez Alonso, M.

    1983-01-01

    INFCE work on research reactor core conversion from HEU to LEU, attracted a raising interest on this type of nuclear reactors. In this context, the present work shows a compilation of worldwide research and test nuclear reactors, now in operation, under construction, or planned, as well as decommissioned reactors (tables A to F). Brief descriptions of these reactors are included in tables G to L. In table M a summary view of reactors with power level between 10 and 30 MWt is shown. Attention is focused on that power range, as it has been considered in very preliminar studies for a new research reactor. Almost all data have been obtained from current available bibliography. (author)

  4. ANALISIS PENYEBAB BANJIR KALI JUANA

    Directory of Open Access Journals (Sweden)

    Teguh Marhendi

    2017-04-01

    Full Text Available Kali Juana yang berada di Kabupaten Pati dan Kudus serta sebagian kecil di Kabupaten Grobogan dan Blora, merupakan kawasan banjir. Kejadian banjir di Kali Juana, sudah menjadi rutinitas setiap musim hujan.Dari Januari sampai bulan Mei 2016tercatat terjadi 11 kejadian banjir dibeberapa wilayah, seperti Kecamatan Kaliwungu, Undaan dan Mejobo (Kab. Kudus serta Pati, Margorejo dan Juwana (Kab. Pati. Kali Juana merupakan bifurkasi Kali Serang pada Pintu Wilalung, yang berfungsi sebagai pintu pengatur banjir (dibangun pada zaman Belanda tahun 1918, melalui Kali Babalan menuju ke Kali Juana. Tulisan inidimaksudkan untuk menganalisis penyebab kejadian banjir di Kali Juana. Analisis dilakukan dengan melakukan kajani dan analisis hujan serta mekanisme aliran. Hasil analisis menunjukkan bahwa kondisi Kali Juana dari pertemuan Kali Logung di pintu Wilalung sampai hilir telah mengalami pendangkalan akibat kemiringan dasar atau topografi yang landai, dan mengakibatkan mudah terjadi sedimentasi sehingga mengurangi kapasitas pengaliran. Hal ini menyebabkan luapan banjir sering menggenangi wilayah Kabupaten Kudus dan Pati.

  5. Estudos preliminares com bromoacetamida, um novo moluscicida

    Directory of Open Access Journals (Sweden)

    Naftale Katz

    1985-09-01

    Full Text Available A bromoacetamida tem sido testada como moluscicida na República Popular da China, para tratamento de criadouros de Oncomelania, hospedeiro do Schistosoma japonicum, com bons resultados. O produto é solúvel em água, o que simplifica seu uso. Foram feitos ensaios biológicos preliminares deste produto em caramujos adultos (Biomphalaria glabrata, B. tenagophila e B. straminea, recém-eclodidos e desovas. Paralelamente foram feitos ensaios com o pentaclorofenol para avaliar a suscetibilidade dos caramujos. O produto foi testado também sobre peixes, Lebistes reticulatus. Os moluscos testados mediam 8-10 mm de diâmetro; os recém-eclodidos tinham 1-3 dias de idade e as desovas 0-1 dia de idade. A temperatura da água durante os experimentos variou de 24,3 a 27,0°C. O produto foi ativo para caramujos adultos, recém-eclodidos e desovas, em concentrações em tomo de 1 a 4 ppm. Para os peixes o produto foi menos tóxico do que para os caramujos (CLço 7,5 ppm. Estes resultados indicam que a bromoacetamida apresenta propriedades moluscicidas promissoras para o controle da Biomphalaria spp.Bromocetamide has been tested as molluscicide, with good results, in the People's Republic of China, on Oncomelania, host of Schistosoma japonicum. We have conducted preliminary assays with bromoacetamide on adult snails (B. glabrata, B. tenagophila and B. straminea, newly hatched smails and egg-masses. This product has been also tested on fishes (Lebistes reticulatus. Comparative assays have been made with pentaclorophenol to evaluate the suceptibility of the snails. Snails tested had a diameter of 8-10 mm; the newly hatched were 1-3 days old and the eggs-masses. 0-1 day old. The temperature of the water varied from 24.3 to 27.5° C. Bromoacetamide was active on adult and newly hatched snails and egg-masses, in concentrations from 1-4ppm. The product was less toxic for jish (LC90 = 7,5 ppm. These results indicate that bromoacetamide has promising molluscicide

  6. ANALISIS LITERASI EKONOMI

    Directory of Open Access Journals (Sweden)

    Peter Garlans Sina

    2012-10-01

    Full Text Available Abstract: Analysis of Economic Literacy. The aim of this research is as an effort to increase economic literacy for individuals and households who want to achieve prosperity. Therefore, the obligation of improving the economic literacy needs to be done in a well-planned manner and come from the strong intention to learn in order to improve the economic literacy. It could have an effect on the assets accumulation, a better debt management, as a protection, as well as to increase savings and managing spending intelligently.   Keyword: economic literacy, asset, debt, protection, saving, spending   Abstrak: Analisis Literasi Ekonomi. Tulisan ini bertujuan sebagai upaya meningkatkan literasi ekonomi bagi individu maupun rumah tangga yang menginginkan mencapai kesejahteraan. Oleh karena itu, kewajiban meningkatkan literasi ekonomi perlu dilakukan secara terencana dan diawali dari niat untuk belajar meningkatkan literasi ekonomi karena dapat berefek pada akumulasi aset, pengelolaan utang yang tepat, proteksi, meningkatkan tabungan dan cerdas mengelola pengeluaran.   Kata kunci: literasi ekonomi, aset, utang, proteksi, menabung, pengeluaran

  7. Reactor

    International Nuclear Information System (INIS)

    Fujibayashi, Toru.

    1976-01-01

    Object: To provide a boiling water reactor which can enhance a quake resisting strength and flatten power distribution. Structure: At least more than four fuel bundles, in which a plurality of fuel rods are arranged in lattice fashion which upper and lower portions are supported by tie-plates, are bundled and then covered by a square channel box. The control rod is movably arranged within a space formed by adjoining channel boxes. A spacer of trapezoidal section is disposed in the central portion on the side of the channel box over substantially full length in height direction, and a neutron instrumented tube is disposed in the central portion inside the channel box. Thus, where a horizontal load is exerted due to earthquake or the like, the spacers come into contact with each other to support the channel box and prevent it from abnormal vibrations. (Furukawa, Y.)

  8. Breeding characteristics analysis of a commercial fast reactor cooled with sodium liquid

    International Nuclear Information System (INIS)

    Kosaka, N.; Shigehiro, A.

    1982-01-01

    The fast reactor breeding characteristics and its safety is analysed. As reference, for a preliminar analysis, the specifications of Super-Phenix, reactor french of 1200 MWe, are used, varying some parameters after aiming to verify its effects on duplication time. (E.G.) [pt

  9. PENERAPAN ANALISIS SWOC DALAM RENCANA STRATEGIS PENDIDIKAN

    Directory of Open Access Journals (Sweden)

    Hardianto -

    2018-01-01

    Full Text Available Analisis SWOC merupakan salah satu langkah yang bisa diambil dalam membuat sebuah rencana strategis pendidikan. Analisis ini dilakukan untuk melihat secara mendalam situasi internal dan eksternal organisasi. Situasi internal yang dilihat adalah kekuatan (Strenghts dan kelemahan (Weaknesses organisasi pendidikan. Situasi eksternal berupa peluang (Opportinities dan tantangan (Challenges. Untuk membuat sebuah rencana strategis yang baik dapat dilakukan dengan menganalisis setiap kekuatan, kelemahan, peluang dan tantangan. Teknik kartu salju (snow card bisa digunakan dalam melakukan analisis SWOC. Hasil analisis tersebut nantinya akan melahirkan kombinasi strategi kekuatan-peluang, kekuatan-tantangan, kelemahan-peluang dan kelemahan-tantangan.

  10. Analisis Cadangan Devisa Indonesia

    Directory of Open Access Journals (Sweden)

    Lusia Bunga Uli

    2016-09-01

    Full Text Available Abstract This study aims to determine the relationship between variables export, import, and exchange rate against Foreign Exchange Reserves in Indonesia. The data used in the empirical study of a sequence of data monthly time of year 2011.01 through 2014.12 from Bank Indonesia and the Central Statistics Agency (BPS. The analysis tool used is Auto Regression Vector Model (VAR. The results of this study indicate that the one-way relationship between the variables of foreign reserves and export. Then one-way relationship between exchange rate and exports. Lastly, there is a two-way relationship between imports and foreign exchange reserves, two-way relationship between exchange rate and foreign exchange reserves, two-way relationship between imports and exports, two-way relationship between the exchange rate and imports. The results also showed foreign exchange reserves are significantly influenced by the movement itself at a probability of 1 %. Export variable negative and not significantly affect the foreign exchange reserves. While imports of positive and not significant to the foreign exchange reserves. Foreign Exchange Reserves Indonesia is positively influenced by the exchange rate and not significant. Keywords: Foreign exchange reserves, exports, imports, exchange rate   Abstrak. Penelitian ini bertujuan untuk mengetahui seberapa keterkaitan antar variabel ekspor, impor, dan nilai tukar rupiah terhadap Cadangan Devisa Indonesia. Data yang digunakan dalam kajian empiris ini merupakan data runtutaan waktu bulanan dari tahun 2011.01 sampai 2014. 12 yang berasal dari Bank Indonesia dan Badan Pusat Statistik (BPS. Alat analisis yang digunakan yaitu Vector Autoregression Model (VAR. Hasil dari penelitian ini menunjukkan bahwa hubungan searah antara variabel cadangan devisa ke ekspor. Lalu hubungan searah antara kurs terhadap ekspor Terakhir, terdapat hubungan dua arah antara impor dan cadangan devisa, hubungan dua arah antara kurs dan cadangan

  11. Analisis Semiotik Sajak Bulang Cahaya

    Directory of Open Access Journals (Sweden)

    Junaidi Junaidi

    2014-11-01

    Full Text Available Penelitian ini bertujuan menggali makna tanda yang terdapat dalam sajak Bulang Cahaya karya Rida K Liamsi. Untuk menggali makna itu, pendekatan analisis semiotik Roland Barthes digunakan. Hasil penelitian menunjukkan bahwa sajak ini berisi tanda-tanda bersumber dari kosa kata Melayu lama. Sajak ini juga berisi simbol-simbol yang berkaitan dengan kehidupan orang Melayu. Penggunaan kata-kata Melayu lama dan simbol Melayu memperkuat setting Melayu dalam sajak ini. Analisis makna menunjukkan bahwa seseorang merasakan kedukaan sangat mendalam ketika cintanya harus berakhir, tetapi ia terus merasakan kerinduan dengan kekasihnya yang telah pergi. Mitos cinta yang terdapat dalam pusinya adalah orang tahu bahwa putus cinta itu menyakitkan tetapi orang tetap saja jatuh cinta.

  12. Analisis Industri Ritel Di Indonesia

    OpenAIRE

    Soliha, Euis

    2008-01-01

    This article presents an overview the analisys of retail industry in Indonesia.Retail industry in Indonesia grow rapidly. Industrial presence of modern retailbasically exploits public shopping pattern especially middle-weight and to which donot want to mill around in traditional market. Analysis Five Forces is used toanalysis retail industry. Analysis five force is bargaining power of buyers,bargaining power of suppliers, threat of new entrants, threat of new substituteproducts, and rivalry a...

  13. ANALISIS POSITIONING RESTORAN CEPAT SAJI

    Directory of Open Access Journals (Sweden)

    Osa Omar Sharif

    2017-04-01

    Full Text Available Penelitian ini bertujuan untuk meneliti positioning restoran cepat saji McDonald's, Kentucky Fried Chicken, California Fried Chicken, A&W, dan Texas Chicken. Penelitian dilakukan di Kota Bandung dengan mengambil sebanyak 400 responden. Analisis yang digunakan dalam penelitian ini adalah analisis multidimensional scaling, analisis memberikan gambaran positioning dari restoran cepat saji yang ditampilkan dalam perceptual map. Restoran cepat saji yang memiliki layanan paling baik adalah McD dan yang memiliki layanan paling buruk adalah CFC. Restoran cepat saji yang memiliki rasa makanan paling enak adalah McD dan yang memiliki rasa makanan tidak enak adalah CFC. KFC dinilai paling ideal karena selalu berhasil menduduki peringkat satu dan dua jika dilihat dari sudut pandang restoran cepat saji yang lain. Pesaing terdekat McD adalah KFC. McD mendapatkan ranking pertama dari segi atribut layanan, kebersihan, variasi makanan, dan rasa makanan. Dengan posisi seperti ini McD seharusnya tetap menjaga kualitas layanan, kebersihan, variasi makanan, dan rasa makanan agar konsumen tetap memilih untuk datang ke McD. KFC sebaiknya tetap menjaga suasana yang membuat konsumen nyaman akan suasana di dalam atau diluar restoran

  14. ANALISIS PERBAIKAN SISTEM PENTANAHAN TELEKOMUNIKASI

    Directory of Open Access Journals (Sweden)

    Umar Umar

    2015-04-01

    Hasil dari penelitian ini adalah perbaikan sistem pentanahan site Kampung Baru dengan menggunakan konfigurasi single point connection window (SPCW, untuk mengamankan sistem telekomunikasi dari kebocoran arus dan petir serta imbasnya.  Perbaikan sistem pentanahan di site Kampung Baru menggunakan banyak elektroda yang membentuk persegi dikarenakan topografi tempat di sana yang memungkinkan dan efektif adalah menggunakan sistem tersebut. Berdasarkan hasil analisis dan perhitungan perbaikan sistem di site Kampung Baru, didapatkan nilai perhitungan sistem pentanahan adalah 1.34 Ohm serta pengukurannya 1.21-1.25 Ohm.

  15. Semiotika Teks: Sebuah Pendekatan Analisis Teks

    Directory of Open Access Journals (Sweden)

    Yasraf Amir Piliang

    2004-12-01

    tanda-tanda yang membentuk apa yang disebut sebagai ‘teks’. Analisis teks, menurut Roland Barthes, akan menghasilkan makna denotatif, yakni makna tanda yang bersifat eksplisit, dan makna konotatif, yaitu makna tanda lapis kedua yang bersifat implisit.

  16. Risk analysis; Analisis de riesgos

    Energy Technology Data Exchange (ETDEWEB)

    Baron, J H; Nunez McLeod, J; Rivera, S S [Universidad Nacional de Cuyo, Mendoza (Argentina). Instituto de Capacitacion Especial y Desarrollo de Ingenieria Asistida por Computadora (CEDIAC)

    1997-07-01

    This book contains a selection of research works performed in the CEDIAC Institute (Cuyo National University) in the area of Risk Analysis, with specific orientations to the subjects of uncertainty and sensitivity studies, software reliability, severe accident modeling, etc. This volume presents important material for all those researches who want to have an insight in the risk analysis field, as a tool to solution several problems frequently found in the engineering and applied sciences field, as well as for the academic teachers who want to keep up to date, including the new developments and improvements continuously arising in this field. [Spanish] Este libro contiene una seleccion de trabajos de investigacion realizados dentro del Instituto de Capacitacion Especial y Desarrollo de la Ingenieria Asistida por Computadora en el area del analisis de riesgos, con una orientacion hacia el estudio de incertidumbres y sensibilidad, confiabilidad de software, modelacion de accidentes severos, etc. Este volumen recoge un material de indudable importancia e interes para todos aquellos investigadores y profesionales que desean incursionar en este campo del analisis de riesgos como herramienta para la solucion de problemas frecuentemente encontrados en la ingenieria y las ciencias aplicadas, asi como para los academicos que desean mantenerse al dia, conociendo los nuevos desarrollos y tecnicas que constantemente aparecen en su area.

  17. Analisis Kebijakan dan Efektivitas Organisasi

    Directory of Open Access Journals (Sweden)

    Amir Syarifudin Kiwang

    2015-05-01

    Full Text Available Penerapan Peraturan Gubernur Nusa Tenggara Timur Nomor 8 Tahun 2011 tentang Organisasi dan Tata Kerja Unit Pelaksana Teknis Pendidikan dan Pelatihan Koperasi dan Usaha Mikro Kecil dan Menengah pada Dinas Koperasi dan Usaha Mikro Kecil dan Menengah Provinsi Nusa Tenggara Timur adalah dalam rangka untuk meningkatkan efektivitas kerja organisasi pada UPT Diklat Koperasi dan UMKM. Penelitian ini berusaha untuk melihat dampak kebijakan organisasi terhadap efektivitas organisasi dengan menggunakan enam elemen variabel dari kebijakan dan praktik manajemen. Keenam elemen tersebut adalah penetapan tujuan strategis, pencarian dan pemanfaatan sumber daya, lingkungan prestasi, proses komunikasi, kepemimpinan dan pengambilan keputusan, serta adaptasi dan inovasi organisasi. Penelitian kualitatif ini menggunakan pendekatan studi kasus. Teknik analisis data yang digunakan adalah analisis data model Miles dan Huberman, yang terdiri atas reduksi data, display/penyajian data, dan kesimpulan/verifikasi. Hasil penelitian menunjukkan bahwa efektivitas organisasi pada UPT Diklat koperasi dan UMKM belum berjalan secara baik, hal ini dapat dilihat dari beberapa hal antara lain, belum adanya tenaga spesialisasi pengelola diklat dan tenaga khusus (sarjana di bidang perkoperasian dan kondisi lingkungan kerja (lingkungan prestasi pada UPT Diklat koperasi dan UMKM yang belum efektif. Penempatan pegawai juga belum tepat, mutasi ke UPT Diklat Koperasi dan UMKM tidak memperhatikan latar belakang pendidikan dan spesialisasi/keahlian pegawai sehingga membutuhkan waktu dalam proses penyesuaian serta menurunkan jumlah pelaksanaan diklat dikarenakan keterbatasan alokasi dana.

  18. ANALISIS DAYA SAING KEDELAI INDONESIA

    Directory of Open Access Journals (Sweden)

    Sarwono Sarwono

    2014-09-01

    Full Text Available RCA (Revealed Comparative Advantage index of soybean in Indonesia from 1983 up to 2013 is less than one, mostly. It means that the competitiveness of soybean in Indonesia is low. The purpose of this study is to analyze the factors influence the soybean competitiveness. OLS (Ordinary Least Square was used as the analysis method. Hypotheses test based on that analysis model is not bias, so that, classic divergence test is needed. It is for getting the Best Linier Unbiased Estimator (BLUE appraisal. T statistic and F statistic were also applied. The result of this research shows that production and export have positive and significant influence. In addition, exchange rate and government policy do not influence the Indonesia soybean competitiveness.Indeks RCA (Revealed Comparative Advantage kedelai Indonesia dari tahun 1983-2013 kecenderungan bernilai kurang dari satu yang berarti daya saing kedelai Indonesia rendah.Penelitian ini bertujuan untuk menganalisis faktor-faktor yang mempengaruhi daya saing kedelai Indonesia.Metode analisis yang digunakan adalah Ordinary Least Square (OLS.Pengujian hipotesis berdasarkan model analisis tersebut tidak bias maka perlu dilakukan uji penyimpangan klasik yang tujuannya agar diperoleh penaksiran yang bersifat Best Linier Unbiased Estimator (BLUE.Pengujian statistik menggunakan uji t statistikdan uji f statistik.Hasil penelitian ini menunjukkan bahwa produksi dan ekspor berpengaruh secara positif dan signifikan terhadap daya saing kedelai Indonesia. Nilai tukar rupiah dan kebijakan pemerintah tidak berpengaruh terhadap daya saing kedelai Indonesia.

  19. Analisis Harmonisa Inverter PWM Satu Fasa

    OpenAIRE

    Rejeki Simanjorang

    2008-01-01

    Pada tesis ini dianalisis harmonisa inverter PWM satu fasa. Inverter PWM satu fasa yang akan ditinjau adalah inverter satu fasa jembatan penuh (konvensional) dan inverter komposit. Analisis difokuskan pada penentuan pola penyaklaran yang optimum agar pembangkitan harmonisa dan switching losses inverter rendah. Untuk menentukan pola penyaklaran optimum maka dilakukan analisis yang berbasis pada rangkaian ekivalen harmonisa inverter satu fasa. Dengan menggunakan pola penyaklaran optimum, kedua ...

  20. Estudio general de la region del Lago Titicaca evaluando en forma preliminar un sistema de analisis interactivo de imagenes multiespectrales

    Science.gov (United States)

    Brockmann, C.E.; Carter, William D.

    1976-01-01

    ERTS-1 digital data in the form of computer compatible tapes provide the geoscientist with an unusual opportunity to test the maximum flexibility of the satellite system using interactive computers, such as the General Electric Image 100 System. Approximately 9 hours of computer and operator time were used to analyze the Lake Titicaca image, 1443-14073, acquired 9 October 1973. The total area of the lake and associate wetlands was calculated and found to be within 3 percent of previous measurements. The area was subdivided by reflectance characteristics employing cluster analysis of all 4 bands and later compared with density values of band 4. Reflectance variations may be attributed to surface roughness, water depth and bottom characteristics, turbidity, and floating matter. Wetland marsh vegetation, vegetation related to ground-water effluents, natural grasses, and farm crops were separated by cluster analysis. Sandstone, limestone, sand dunes, and several volcanic rock types were similarly separated and displayed by assigned colors and extended through the entire scene. Waste dumps of the Matilde Zinc Mine and smaller mine workings were tentatively identified by signature analysis. Histograms of reflectance values and map printouts were automatically obtained as a record of each of the principal themes. These themes were also stored on a work tape for later display and photographic record as well as to serve in training. The Image 100 System is rapid, extremely flexible and very useful to the investigator in identifying subtle features that may not be noticed by conventional image analysis. The entire scene, which covers 34,225 km2, was analyzed at a scale of 1:600,000, and portions at 1:98,000 and 1:25,000, during a 9-hour period at a rental cost of $250 per hour. Costs to the user can be reduced by restricting its uses to specific areas, objectives, and procedures, rather than undertaking a complete analysis of a total scene.

  1. ANALISIS IMPOR BERAS DI INDONESIA

    Directory of Open Access Journals (Sweden)

    Ratih Kumala Sari

    2014-10-01

    Full Text Available Abstrak ___________________________________________________________________ Salah satu kebijakan pemerintah untuk memenuhi kebutuhan beras yaitu dengan menggenjot produksi beras dalam negeri. Namun dengan semakin meningkatnya jumlah penduduk akan meningkatkan permintaan terhadap beras dan upaya peningkatan produktivitas dalam negeri tidak dapat memenuhi kebutuhan beras dalam negeri. Sehingga untuk menutupi kekurangan tersebut pemerintah mengambil keputusan untuk melakukan impor beras dari negara lain. Akan tetapi pada kenyataannya impor beras dilakukan ketika data statistik menunjukkan bahwa Indonesia sedang mengalami surplus beras. Penelitian ini bertujuan untuk mengetahui faktor-faktor apa saja yang mempengaruhi impor beras di Indonesia. Metode analisis yang digunakan adalah analisis regresi linier berganda dengan model Error Correction Model (ECM. Berdasarkan hasil penelitian disimpulkan bahwa secara parsial maupun secara bersama-sama produksi beras, konsumsi beras, harga beras dalam negeri dan nilai tukar rupiah terhadap dollar AS berpengaruh dan signifikan terhadap impor beras di Indonesia. Abstract ___________________________________________________________________ One of the government’s policy to fulfill the need of rice is to boost the domestic production. However, by increasing the population, the demand of rice will also increase and the effort of increasing the domestic productivity cannot supply domestic rice need. So, to cover the shortage the government make decision to import rice from other countries. Yet, in fact importing rice is occurred when the statistical data showed that the supply of rice in Indonesia is surplus. The purpose of this research is necessary to study the factors which influence the import of rice in Indonesia. The analysis method used is multiple linear regression analysis model with Error Correction Model (ECM. Based on the research proven that partially or jointly the production, the consumption, the

  2. Spectrographic Determination of Impurities in Ceramic Materials for Nuclear Fusion Reactors. I. Analysis of Alumina; Determinacion Espectrografica de impurezas en materiales ceramicos para fusion nuclear. I.- Analisis de alumina

    Energy Technology Data Exchange (ETDEWEB)

    Rucandio, M I; Roca, M; Melon, A

    1990-07-01

    The determination of minor and trace elements in the aluminium oxide considered as possible ceramic material in thermonuclear fusion reactors has been studied. The concentration ranges are 0.1 - 0.3 * for Ca, Si and Y, and at the ppm level for Co, Cr, Fe, Hf, K, Li, Mg, Mn, Na, Ni, Se, Ta, Ti, V and Zr. Atomic emission spectroscopy with direct current ore excitation and photographic detection has been employed. For Hf, Mg, Ta, Ti, V and Zr the use of 40% of copper fluoride as a carrier and of Nb as lnternal standard provide suitable sensitivities and precessions, while for the rest of elements the bent results are obtained with graphite powder in different proportions and Rb or Sn as internal standard. (Author) 7 refs.

  3. Spectrographic Determination of Impurities in Ceramic Materials for Nuclear fusion Reactors. II. Analysis of Magnesium Aluminate; Determinacion Espectrografia de Impurezas en materiales Ceramicos para Fusion Nuclear. II. Analisis de Aluminato de Magnesio

    Energy Technology Data Exchange (ETDEWEB)

    Rucandio, M I; Roca, M; Melon, A

    1990-07-01

    The determination of minor and trace elements in the magnesium aluminate, considered as possible material in thermonuclear fusion reactors, has been studied. The concentration ranges are 0.1 - 0.3 % for Ca, SI and Y, and at the ppm level for Co, Cr, Fe, Hf, K, Li, Mn, Na, Ni, Se, Ta, Ti, V and Zr. Atomic emission spectroscopy with direct current are excitation and photographic detection has been employed. For Hf, Ta and Zr the use of 40% of copper fluoride as a carrier and of Nb as internal standard provide suitable sensitivities and precessions, while for the rest of elements the best results are obtained with graphite powder in different proportions and Rb or Sn as internal standard. (Author)4 refs.

  4. Analysis of turbomachineries by means of the application of the SMDTurbo system; Analisis de turbomaquinas mediante la aplicacion del sistema SMDTurbo

    Energy Technology Data Exchange (ETDEWEB)

    Zuniga, Helen; Garcia, Ernesto; Bernabe, Jose; Aboites, Fernando [CIATEQ, A.C., Queretaro (Mexico)

    2007-11-15

    In this paper is presented an integral system in experimental phase developed by CIATEQ for the monitoring and acquisition of involved physical variables in the turbo-machinery analysis. The system has been denominated SMDTurbo (System of Monitoring and Diagnosis for Turbo machinery) and its purpose is to realize a diagnosis (on the basis of mathematical and graphical tools) of the performance of the turbo machinery through the measurement of variables such as pressure, temperature and vibration. The obtained data from these elements is used for its later processing of analysis and diagnosis by means of specialized software with which the performance of the turbo machinery will be able to be performed (TM). Preliminary results of the proposal are presented. [Spanish] En este trabajo se presenta un sistema integral en fase experimental desarrollado por CIATEQ para el monitoreo y adquisicion de variables fisicas involucradas en el analisis de turbomaquinaria. El sistema se ha denominado SMDTuro (Sistema de Monitoreo y Diagnostico para Turbomaquinaria) y tiene como proposito realizar un diagnostico (en base a herramientas matematicas y graficas) del rendimiento de la turbomaquina a traves de la medicion de variables como presion, tempreratura y vibracion. La informacion obtenida de estos elementos se utiliza para su posterior proceso de analisis y diagnostico mediante un software especializado con el cual se podra realizar el rendimiento de la turbomaquinaria (TM). Se presentan resultados preliminares de la propuesta.

  5. Evaluación y estandarización del análisis por activación neutrónica según el método del k-sub cero en el reactor nuclear RP-10: Estudio preliminar empleando irradiaciones cortas

    OpenAIRE

    Montoya Rossi, Eduardo Haroldo

    1995-01-01

    Se ha estandarizado una posición de irradiación del reactor nuclear RP-10 para el uso del análisis por activación neutrónica según el método del k sub cero, empleando la convención de Högdahl y se ha evaluado el comportamiento de dicho método respecto a la exactitud y precisión de los resultados obtenidos en el análisis multielemental cuantitativo de diversos materiales certificados de referencia. Para comprobar que el método analítico se encuentra totalmente bajo control estadístico, se ha e...

  6. Analisis Value Chain Di Industri Otomotif

    OpenAIRE

    Hendri, Hendri

    2017-01-01

    Penelitian ini untuk menganalisis industri otomotif. Tujuan dari penelitian ini adalah untuk menganalisis dan mengetahui aktivitas dan kondisi internal proses industri manufaktur dengan menggunakan value chain guna masukan dimasa akan datang bagi industri otomotif secara khusus. Value Chain merupakan rantai nilai yang dapat mengetahui kekuatan Perusahaan, keuntungan dan kesuksesan dari rantai aktivitas dalam Perusahaan atau industri manufaktur.Metode analisis menggunakan Statistika Deskript...

  7. Estudio Preliminar del Género Hevea en Colombia

    Directory of Open Access Journals (Sweden)

    Evans Schultes Richard

    1946-04-01

    Full Text Available Aunque en el territorio colombiano se han venido explotando los árboles caucheros del género Hevea durante casi medio siglo, solo ha sido en los últimos años cuando los botánicos han podido estudiar científicamente las especies en este país. En el presente artículo me limito a exponer de manera suscinta la identificación específica y la distribución geográfica del género Hevea en Colombia, valiéndome de las identificaciones botánicas preliminares que se han hecho hasta ahora, así como de los datos que he recogido personalmente y las informaciones que me han sido suministradas en fuentes fidedignas. Es de lamentarse la falta de exploración botánica en la hoya del río Inírida y sus afluentes que por ser, junto con el Guaviare, la región situada más al noreste de la zona de extensión del género Hevea, deja una laguna en los conocimientos que actualmente poseemos sobre la distribución geográfica de este género botánico. Igualmente carecemos de datos botánicos respecto de los ríos de menor importancia tales como el Yarí, el Cahuinarí y el Cotuhé, aunque sí los tenemos de las regiones mencionadas, lo mismo de otras vastas extensiones de la Amazonía Colombiana, podremos completar a satisfacción el estudio cuyo esbozo provisional presento en este trabajo.

  8. Analysis of the micro-structural damages by neutronic irradiation of the steel of reactor vessels of the nuclear power plant of Laguna Verde. Characterization of the design steel; Analisis de los danos micro-estructurales por irradiacion neutronica del acero de la vasija de los reactores de la Central Nuclear de Laguna Verde. Caracterizacion del acero de diseno

    Energy Technology Data Exchange (ETDEWEB)

    Moranchel y Rodriguez, M.; Garcia B, A. [IPN, Escuela Superior de Fisica y Matematicas, Departamento de Fisica, Av. Luis Enrique Erro s/n, Unidad Profesional Adolfo Lopez Mateos, Col. Lindavista, 07738 Mexico D. F. (Mexico); Longoria G, L. C., E-mail: mmoranchel@ipn.m [ININ, Direccion de Investigacion Cientifica, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2010-09-15

    The vessel of a nuclear reactor is one of the safety barriers more important in the design, construction and operation of the reactor. If the vessel results affected to the grade of to have fracture and/or cracks it is very probable the conclusion of their useful life in order to guarantee the nuclear safety and the radiological protection of the exposure occupational personnel, of the public and the environment avoiding the exposition to radioactive sources. The materials of the vessel of a nuclear reactor are exposed continually to the neutronic irradiation that generates the same nuclear reactor. The neutrons that impact to the vessel have the sufficient energy to penetrate certain depth in function of the energy of the incident neutron until reaching the repose or to be absorbed by some nucleus. In the course of their penetration, the neutrons interact with the nuclei, atoms, molecules and with the same crystalline nets of the vessel material producing vacuums, interstitial, precipitate and segregations among other defects that can modify the mechanical properties of the steel. The steel A533-B is the material with which is manufactured the vessel of the nuclear reactors of nuclear power plant of Laguna Verde, is an alloy that, among other components, it contains atoms of Ni that if they are segregated by the neutrons impact this would favor to the cracking of the same vessel. This work is part of an investigation to analyze the micro-structural damages of the reactor vessels of the nuclear power plant of Laguna Verde due to the neutronic irradiation which is exposed in a continuous way. We will show the characterization of the design steel of the vessel, what offers a comprehension about their chemical composition, the superficial topography and the crystalline nets of the steel A533-B. It will also allow analyze the existence of precipitates, segregates, the type of crystalline net and the distances inter-plains of the design steel of the vessel. (Author)

  9. Development of a numerical code for the analysis of the linear stability of the U1 and U2 reactors of the CNLV; Desarrollo de un codigo numerico para el analisis de estabilidad lineal de los reactores de las U1 y U2 de la CNLV

    Energy Technology Data Exchange (ETDEWEB)

    Espinosa P, G.; Estrada P, C.E. [Universidad Autonoma Metropolitana-Iztapalapa, 09000 Mexico D.F. (Mexico); Nunez C, A.; Amador G, R. [Comision Nacional de Seguridad Nuclear y Salvaguardias, Mexico D.F. (Mexico)

    2001-07-01

    The computer code ANESLI-1 developed by the CNSNS and UAM-I, has the main goal of making stability analysis of nuclear reactors of the BWR type, more specifically, the reactors of the U1 and U2 of the CNLV. However it can be used for another kind of applications. Its capacity of real time simulator, allows the prediction of operational transients, and conditions of dynamic steady states. ANESLI-1 was developed under a modular scheme, which allows to extend or/and to improve its scope. The lineal stability analysis predicts the instabilities produced by the wave density phenomenon. (Author)

  10. Physical-chemical and operational performance of an anaerobic baffled reactor (ABR treating swine wastewater = Desempenho físico-químico e operacional de um reator anaeróbio compartimentado (RAC como tratamento biológico preliminar de efluentes de suinocultura

    Directory of Open Access Journals (Sweden)

    Erlon Lopes Pereira

    2010-10-01

    Full Text Available Since hog raising concentrates a huge amount of swine manure in smallareas, it is considered by the environmental government organizations to be one of the most potentially pollutant activities. Therefore the main objective of this research was to evaluate by operational criteria and removal efficiency, the performance of a Anaerobic Baffled Reactor (ABR, working as a biological pre-treatment of swine culture effluents. The physical-chemical analyses carried out were: total COD, BOD5, total solids (TS, fix (TFS and volatiles (TVS, temperature, pH, total Kjeldahl nitrogen, phosphorus, total acidity and alkalinity. The ABR unit worked with an average efficiency of 65.2 and 76.2%, respectively, concerning total COD and BOD5, with a hydraulic retention time (HRT about 15 hours. The results for volumetric organic loading rate (VOLR, organic loading rate (OLR andhydraulic loading rate (HLR were: 4.46 kg BOD m-3 day-1; 1.81 kg BOD5 kg TVS-1 day-1 and 1.57 m3 m-3 day-1, respectively. The average efficiency of the whole treatment system for total COD and BOD5 removal were 66.5 and 77.8%, showing an adequate performancein removing the organic matter from swine wastewater.A suinocultura por ser uma atividade pecuária concentradora de dejetos em pequenas áreas é considerada, pelos órgãos de gerência ambiental, como uma das atividades mais degradadoras do meio ambiente. Nesta pesquisa objetivou-se, por conseguinte, avaliar a utilização de um reator anaeróbio compartimentado (RAC, como unidade de prétratamento de um reator tipo UASB, em escala piloto, na adequação ambiental dos efluentes de suinocultura, avaliando critérios operacionais e a eficiência. As análises físico-químicasrealizadas foram: DQOtotal, DBO5, sólidos totais (ST, fixos (SF e voláteis (SV, temperatura, pH, nitrogênio total Kjeldahl, fósforo, acidez total e alcalinidade. A unidade RAC trabalhou com eficiência de 65,2 e 76,2% para a remoção de DQOtotal e DBO5

  11. Reti di città, mobilità e ambiente: il Preliminare di PTCP di Avellino

    Directory of Open Access Journals (Sweden)

    Carmela Gargiulo

    2010-02-01

    Full Text Available  L’articolo propone la lettura dei contenuti del Preliminare del PTCP di Avellino, un piano per molti aspetti innovativo, soprattutto per aver coniugato pianificazione di area vasta di tipo tradizionale e logica “strategica”. In particolare, l’articolo descrive idee guida, contenuti e strategie del piano orientate, prevalentemente, a stimolare lo sviluppo sostenibile di un’area in ritardo di sviluppo come la provincia irpina, attraverso la salvaguardia e valorizzazione delle risorse naturali e storico-culturali, la costruzione di reti di medie e piccole città e reti di mobilità alle diverse scale, da quella urbana a quella internazionale, e interventi sul sistema della mobilità. Nel 2004, ormai più di cinque anni fa, è stato adottato, a maggioranza assoluta (solo due gli astenuti, il Preliminare di Piano Territoriale di Coordinamento della Provincia di Avellino, dopo un lavoro di oltre due anni che ha visto impegnati gli uffici provinciali con due dipartimenti universitari. Il lavoro, che va ben oltre il significato e la valenza di un preliminare e che coniuga due pratiche di piano diverse (quella tradizionale e quella strategica ruota attorno a tre idee di fondo, tra loro strettamente interrelate, che costituiscono i criteri guida che finora ha inteso seguire la provincia di Avellino nell’attività di governo delle trasformazioni. Tali idee, quindi, costituiscono le fondamenta su cui è stato costruito il Preliminare e sono la griglia di specificazione delle strategie e degli obiettivi di piano. Esse sono alla base delle scelte elaborate per lo sviluppo compatibile del territorio, e sono riferibili alle azioni operative di trasformazione del territorio che gli Enti locali, cui è demandato tale compito, nel prossimo futuro dovranno affrontare. Le tre idee forza del Preliminare, descritte nel seguito, sono riferibili ai sistemi di risorse principali della provincia di Avellino, oggetto di una indagine analitico

  12. Analisis Kinerja Local Area Network Menggunakan Router.

    OpenAIRE

    Hutahaean, Yosua

    2012-01-01

    Perangkat internetworking menawarkan komunikasi di antara segmen Local Area Network (LAN). Ada empat tipe utama perangkat internetworking ini: repeater, bridge, router, dan gateway. Perangkat ini dibedakan atas dasar system lapisan Open System Interconnection (OSI) yang digunakan, berfungsi sebagai media komunikasi dari LAN ke LAN. Pada Tugas Akhir ini penulis tertarik untuk membahas analisis kinerja Local Area Network (LAN) menggunakan Router yang menggunakan sistem antrian M/M/1 dimana j...

  13. ANALISIS KONDISI TERAS REAKTOR DAYA MAJU AP1000 PADA KECELAKAAN SMALL BREAK LOCA

    Directory of Open Access Journals (Sweden)

    Andi Sofrany Ekariansyah

    2015-06-01

    Full Text Available ABSTRAK ANALISIS KONDISI TERAS REAKTOR DAYA MAJU AP1000 PADA KECELAKAAN SMALL BREAK LOCA. Kecelakaan yang diakibatkan oleh kehilangan pendingin (loss of coolant accident / LOCA dari sistem reaktor merupakan kejadian dasar desain yang tetap diantisipasi dalam desain reaktor daya yang mengadopsi teknologi Generasi II hingga IV. LOCA ukuran kecil (small break LOCA memiliki dampak yang lebih signifikan terhadap keselamatan dibandingkan LOCA ukuran besar (large break LOCA seperti terlihat pada kejadian Three-Mile Island (TMI. Fokus makalah adalah pada analisis small break LOCA pada reaktor daya maju Generasi III+ yaitu AP1000 dengan mensimulasikan tiga kejadian pemicu yaitu membukanya katup Automatic Depressurization System (ADS secara tak disengaja, putusnya salah satu pipa Direct Vessel Injection (DVI secara double-ended, dan putusnya pipa lengan dingin dengan diameter bocoran 10 inci. Metode yang digunakan adalah simulasi kejadian pada model AP1000 yang dikembangkan secara mandiri menggunakan program perhitungan RELAP5/SCDAP/Mod3.4. Dampak yang ingin dilihat adalah kondisi teras selama terjadinya small break LOCA yang terdiri dari pembentukan mixture level dan transien temperatur kelongsong bahan bakar. Hasil simulasi menunjukkan bahwa mixture level untuk semua kejadian small break LOCA berada di atas tinggi teras aktif yang menunjukkan tidak terjadinya core uncovery. Adanya mixture level berpengaruh pada transien temperatur kelongsong yang menurun dan menunjukkan pendinginan bahan bakar yang efektif. Hasil di atas juga identik dengan hasil perhitungan program lain yaitu NOTRUMP. Keefektifan pendinginan teras juga disebabkan oleh berfungsinya injeksi pendingin melalui fitur keselamatan pasif yang menjadi ciri reaktor daya AP1000. Secara keseluruhan, hasil analisis menunjukkan model AP1000 yang telah dikembangkan dengan RELAP5 dapat digunakan untuk keperluan analisis kecelakaan dasar desain pada reaktor daya maju AP1000. Kata kunci: analisis

  14. ANALISIS SKENARIO KEGAGALAN SISTEM UNTUK MENENTUKAN PROBABILITAS KECELAKAAN PARAH AP1000

    Directory of Open Access Journals (Sweden)

    D.T. Sony Tjahyani

    2014-03-01

    Full Text Available Kejadian Fukushima telah menunjukkan bahwa kecelakaan parah dapat terjadi, maka dari itu sangatlah penting untuk menganalisis tingkat keselamatan pada reaktor daya. Berdasarkan rekomendasi expert mission IAEA setelah kejadian Fukushima, perlu dilakukan upaya untuk meminimalisasi terjadinya kecelakaan parah yaitu dengan melakukan proses pendinginan yang maksimal. Dalam konsep keselamatan fasilitas nuklir, khususnya reaktor daya telah diterapkan konsep keselamatan berlapis (Defence in Depth, DiD. Konsep keselamatan tersebut terdiri atas 5 level pertahanan yang bertujuan mencegah dan mengurangi lepasan produk fisi ke masyarakat dan lingkungan pada saat reaktor daya mengalami kecelakaan. Dalam reaktor telah didesain sistem atau tindakan yang mempunyai fungsi untuk mengatasi setiap level tersebut. Tujuan dari analisis ini adalah menentukan probabilitas kecelakaan parah dengan melakukan skenario kegagalan sistem dalam proses pendinginan di reaktor. Sebagai obyek analisis adalah reaktor daya AP1000, karena jenis reaktor ini sedang banyak dibangun saat ini. Skenario dilakukan dengan mengasumsikan beberapa kombinasi kegagalan sistem yang termasuk dalam DiD level 2 dan 3. Kegagalan sistem kemudian dianalisis dengan menggunakan analisis pohon kegagalan berdasarkan perangkat lunak SAPHIRE ver. 6.76. Dari analisis didapatkan probabilitas gagal dari kelompok sistem DiD level 2 dan 3 pada AP1000 masih di bawah batas kriteria dari IAEA yaitu lebih kecil dari 10-2, serta probabilitas kecelakaan parah didapatkan sebesar 6,17 x 10-10. Berdasarkan analisis ini disimpulkan bahwa AP1000 mempunyai tingkat keselamatan yang cukup tinggi, karena melalui skenario kegagalan sistem didapatkan probabilitas kecelakaan parah yang sangat kecil.   ABSTRACT Fukushima accident has shown that severe accident could be occurred, therefore it is important to analyze safety level of nuclear power plants. Based on the recommendations of IAEA expert mission after the Fukushima accident

  15. Neutron activation analysis and activity in the vessel steel of a BWR reactor for their study without radiological risks in microscopy and spectrometry; Analisis de activacion neutronica y actividad en el acero de la vasija de un reactor nuclear tipo BWR para su estudio sin riesgos radiologicos en microscopia y espectrometria

    Energy Technology Data Exchange (ETDEWEB)

    Moranchel, M.; Garcia B, A. [IPN, Escuela Superior de Fisica y Matematicas, Departamento de Fisica, Unidad Profesional Adolfo Lopez Mateos, Zacatenco, 07738 Mexico D. F. (Mexico); Longoria G, L. C., E-mail: mmoranchel@ipn.mx [IAEA, Department of Technical Cooperation, Division for Latin America, Room B1109 Wagramerstrasse 5, PO Box 100, A-1400, Vienna (Austria)

    2012-07-01

    The vessel material of nuclear reactors is subject to irradiation damage induced by the bombardment of neutrons coming from the reactor core. Neutrons are classified as fast and thermal, which produce different effects. Fast neutrons cause damage to the material by dislocation or displacement of atoms in the crystal structure, while the effect of thermal neutrons is a nuclear transmutation that can significantly change the properties of the material. The type and intensity of damage is based on the characteristics of the material, the flow of neutrons and the modes of neutrons interaction with the atomic structures of the material, among others. This work, alluding to nuclear transmutation, makes an analysis of neutron activation of all isotopes in a steel boiling water nuclear reactor (BWR) vessel. An analytical expression is obtained in order to model activity of steel, on the basis of the weight percentage of its atomic components. Its activity is theoretically estimated in a witness sample of the same material as that of the vessel, placed within the nuclear reactor since the beginning of its commercial operation in April 1995, up to August 2010. It was theoretically determined that the witness sample, with a 0.56 g mass (1 x 1 x 0.07 cm{sup 3} dimensions or equivalent) does not present a radiological risks during the stage of preparation, observation and analysis of it in electron microscopy and X-ray diffraction equipment s. The theoretical results were checked experimentally by measuring the activity of the sample by means of gamma spectrometry, measurement of the exposure levels around the sample, as well as the induced level to whole body and limbs, using thermo-luminescent dosimetry (TLD). As a result of the theoretical analysis, new chemical elements are predicted, as a result of the activation phenomena and radioactive decay, whose presence can be a fundamental factor of change in the properties of the vessel. This work is a preamble to the

  16. Analysis of the microstructural evolution of the damage by neutron irradiation in the pressure vessel of a nuclear power reactor BWR; Analisis de la evolucion microestructural del dano por irradiacion neutronica en la vasija de presion de un reactor nuclear de potencia BWR

    Energy Technology Data Exchange (ETDEWEB)

    Moranchel y R, M.

    2012-07-01

    Nuclear reactor pressure vessel type BWR, installed in Mexico and in many other countries, are made of an alloy of low carbon steel. The American Society for Testing and Materials (Astm) classifies this alloy as A533-B, class 1. Both the vessel and other internal structures are continuously exposed to the neutron flux from the reactions of fission in nuclear fuel. A large number of neutrons reach the vessel and penetrate certain depth depending on their energy. Its penetration in the neutron collides with the nuclei of the atoms out of their positions in the crystal lattice of steel, producing vacancies, interstitial, segregations, among other defects, capable of affecting its mechanical properties. Analyze the micro-structural damage to the vessel due to neutron irradiation, is essential for reasons of integrity of this enclosure and safety of any nuclear power plant. The objective of this thesis work is theoretical and experimentally determine the microstructural damage of a type nuclear reactor vessel steel BWR, due to neutron radiation from the reactor core, using microscopic and spectroscopic techniques as well as Monte Carlo simulation. Microscopy Optical, Scanning Electron Microscopy, Transmission Electron Microscopy, Energy Dispersion of X-rays Spectrometry and X-rays Diffractometry were the techniques used in this research. These techniques helped in the characterization of both the basis of design of pressure vessel steel and steel irradiated, after eight years of neutron irradiation on the vessel, allowing know the surface morphology and crystal structures of the previous steel and post-irradiation, analyze the change in the microstructure of the steel vessel, morphological damage to surface level in an irradiated sample, among which are cavities in the order of microns produced by Atomic displacements due to the impact of neutronic, above all in the first layers of thickness of the vessel, the effect of swelling, regions of greater damage and Atomic

  17. Study of instabilities in phase by using the tool {sup D}ynamics{sup :} analysis of the evolution space temporary of the waves of density in channels of reactors BWR; Estudio de las Inestabilidades en Fase Mediante la Herramienta Dinamics: analisis de la Evolucion Espacio Temporal de las Ondas de Densidad en Canales de Reactores BWR

    Energy Technology Data Exchange (ETDEWEB)

    Munoz-Cobo, J. L.; Escriva, R.; Merino, R.; Melara, J.

    2013-07-01

    This paper presents the basics of Dynamics V2 to code It allows calculations of stability for oscillations in phase in BWR reactors in the time domain. The equations of the model are exposed and is the integration of the equations. The model can be used in a large number of nodes thrust for the calculations to an acceptable computational cost, it has simplified dynamics of recirculation loop and the code has been incorporated the Oscillation in phase boundary conditions. The code incorporates the equations of boiling sub-cooled which allows to make more realistic calculations as well as subroutines to calculate the subroutines-based properties of the MATPRO and ASME.

  18. ANALISIS PENGENDALIAN DAYA REAKTOR PCMSR DENGAN LAJU ALIR PENDINGIN

    Directory of Open Access Journals (Sweden)

    Iqbal Syafin Noha

    2015-03-01

    Full Text Available Passive Compact Molten Salt Reactor (PCMSR merupakan pengembangan dari Molten Salt Reactor (MSR yang memiliki karakter berbeda dengan lima reaktor generasi IV lainnya, yaitu menggunakan bahan bakar leburan garam. Pada reaktor MSR, garam lebur tidak digunakan sebagai pendingin tetapi digunakan sebagai medium pembawa bahan bakar. Dengan fase bahan bakar yang berupa garam lebur LiF-BeF2-ThF4-UF4, maka dapat dilakukan pengendalian daya dengan mengatur laju aliran bahan bakar dan pendingin. Tujuan penelitian ini adalah untuk mengetahui pengaruh perubahan laju alir pendingin terhadap daya reaktor PCMSR. Analisis dilakukan dengan empat jenis masukan untuk perubahan laju alir pendingin, yaitu masukan step, ramp, eksponensial, dan sinusoidal. Untuk masukan step, laju alir pendingin dibuat berubah secara mendadak. Selanjutnya untuk masukan ramp dan eksponensal, perubahan laju alir masing-masing dibuat perlahan secara linear dan mengikuti fungsi eksponensial. Kemudian untuk masukan sinusoidal, laju alir berubah naik turun secara periodik dengan memvariasikan frekuensi dari perubahan laju alir tersebut. Hasil penelitian menunjukkan bahwa penurunan laju alir pendingin sebesar 50% dari laju pendingin sebelumnya, menyebabkan daya pada reaktor PCMSR turun sebesar 63% dari daya sebelumnya. Jika terjadi fluktuasi laju aliran pendingin, maka semakin cepat perubahan tersebut, maka respon daya yang diberikan semakin kecil. Pada frekuensi yang sangat cepat, daya reaktor menjadi konstan dan cenderung tidak memiliki respon terhadap laju aliran. Hal ini merupakan salah satu aspek keselamatan reaktor, karena reaktor tidak merespon perubahan yang terlalu cepat. Kemampuan reaktor mengatur daya menyesuaikan laju aliran pendingin merupakan aspek keselamatan lainnya. Kata kunci : PCMSR, pengendalian daya, laju alir pendingin, uji respon   Passive Compact Molten Salt Reactor (PCMSR is the development of Molten Salt Reactor (MSR which has different character from other five

  19. Analysis of the three dimensional core kinetics NESTLE code coupling with the advanced thermo-hydraulic code systems, RELAP5/SCDAPSIM and its application to the Laguna Verde Central reactor; Analisis para el acoplamiento del codigo NESTLE para la cinetica tridimensional del nucleo al codigo avanzado de sistemas termo-hidraulicos, RELAP5/SCDAPSIM y su aplicacion al reactor de la CNLV

    Energy Technology Data Exchange (ETDEWEB)

    Salazar C, J H; Nunez C, A [CNSNS, Dr. Jose Ma. Barragan No. 779, Col. Narvarte, 03020 Mexico D.F. (Mexico); Chavez M, C [UNAM, Facultad de Ingenieria, DEPFI Campus Morelos (Mexico)

    2004-07-01

    The objective of the written present is to propose a methodology for the joining of the codes RELAP5/SCDAPSIM and NESTLE. The development of this joining will be carried out inside a doctoral program of Engineering in Energy with nuclear profile of the Ability of Engineering of the UNAM together with the National Commission of Nuclear Security and Safeguards (CNSNS). The general purpose of this type of developments, is to have tools that are implemented by multiple programs or codes such a that systems or models of the three-dimensional kinetics of the core can be simulated and those of the dynamics of the reactor (water heater-hydraulics). In the past, by limitations for the calculation of the complete answer of both systems, the developed models they were carried out for separate, putting a lot of emphasis in one but neglecting the other one. These methodologies, calls of better estimate, will be good to the nuclear industry to evaluate, with more high grades of detail, the designs of the nuclear power plant (for modifications to those already existent or for new concepts in the designs of advanced reactors), besides analysing events (transitory and have an accident), among other applications. The coupled system was applied to design studies and investigation of the Laguna Verde Nuclear power plant (CNLV). (Author)

  20. Statistical analysis in the design of nuclear fuel cells and training of a neural network to predict safety parameters for reactors BWR; Analisis estadistico en el diseno de celdas de combustible nuclear y entrenamiento de una red neuronal para predecir parametros de seguridad para reactores BWR

    Energy Technology Data Exchange (ETDEWEB)

    Jauregui Ch, V.

    2013-07-01

    In this work the obtained results for a statistical analysis are shown, with the purpose of studying the performance of the fuel lattice, taking into account the frequency of the pins that were used. For this objective, different statistical distributions were used; one approximately to normal, another type X{sup 2} but in an inverse form and a random distribution. Also, the prediction of some parameters of the nuclear reactor in a fuel reload was made through a neuronal network, which was trained. The statistical analysis was made using the parameters of the fuel lattice, which was generated through three heuristic techniques: Ant Colony Optimization System, Neuronal Networks and a hybrid among Scatter Search and Path Re linking. The behavior of the local power peak factor was revised in the fuel lattice with the use of different frequencies of enrichment uranium pines, using the three techniques mentioned before, in the same way the infinite multiplication factor of neutrons was analyzed (k..), to determine within what range this factor in the reactor is. Taking into account all the information, which was obtained through the statistical analysis, a neuronal network was trained; that will help to predict the behavior of some parameters of the nuclear reactor, considering a fixed fuel reload with their respective control rods pattern. In the same way, the quality of the training was evaluated using different fuel lattices. The neuronal network learned to predict the next parameters: Shutdown Margin (SDM), the pin burn peaks for two different fuel batches, Thermal Limits and the Effective Neutron Multiplication Factor (k{sup eff}). The results show that the fuel lattices in which the frequency, which the inverted form of the X{sup 2} distribution, was used revealed the best values of local power peak factor. Additionally it is shown that the performance of a fuel lattice could be enhanced controlling the frequency of the uranium enrichment rods and the variety of

  1. Detail analysis of tritium permeation in the metal liquid channels of the regenerating sheaths of a fusion reactor in presence of helium bubbles; Analisis de detalle de la permeacion de tritio en los caneles de metal liquido de las envolturas regeneradoras de un reactor de fusion en presencia de burbujas de helio

    Energy Technology Data Exchange (ETDEWEB)

    Banet, L.; Mas de les Valls, E.; Sedano, L. A.

    2012-07-01

    Inside the channels of liquid metal of the fusion reactor regenerative wrappers, the possible existence of nucleated helium bubbles is not remote. Helium is formed joined the tritium in the escaped neutrons of plasma with lithium. The accumulation of helium in the contact surfaces, between the structure and ML, lead a reduction of heat transfer, at the same time a reduction in the permeation of tritium. The coexistence of three phases in touch: metal liquid, helium and structural material, makes the transport of heat and tritium in a complex phenomenon. To enrich tritium transport studies conducted in the past, there is now a detail analysis of the helium bubble environment adhered to the channel ML wall of a regenerative wrap. For the study we used a CFD tool development on free code OpenFOAM.

  2. Evaluation and standardization of neutron activation analysis according to the K{sub 0} method in the RP-10 reactor; Evaluacion y estandarizacion del analisis por activacion neutronica segun el metodo del K{sub 0} en el reactor nuclear RP-10

    Energy Technology Data Exchange (ETDEWEB)

    Montoya R, E

    1995-06-01

    It has been characterized and standardized an irradiation of the RP-10 Research Nuclear Reactor for use of the K{sub 0} method of neutron activation analysis using the Hoegdahl convention; also it has been evaluate the behaviour of such method in regard to the accuracy and precision of the results obtained in the quantitative multi elemental analysis of several certified materials of reference. In order to prove that the analytical method is totally under statistical control, it has been used the Heydorn method. It has been verified that the method is exact, precise and reliable to determine the aluminium, antimuonium, arsenic, bromine, calcium, chloride, copper, magnesium, manganese, sodium, titanium, vanadium, zinc and other elements. Also, they are discussed, in regard to the use of K{sub 0} constants, the different formalisms employed to calculate the integral of the reaction rate by nucleus in the activation. (author). 58 refs., 18 tabs., 6 figs.

  3. Major accident analyses for experimental zero-power fast reactor assemblies; Analyse des accidents graves pouvant survenir dans les reacteurs experimentaux a neutrons rapides de puissance zero; Analiz krupnoj avarii dlya ehksperimental'ny kh reaktornykh ustanovok nulevoj moshchnosti na bystrykh nejtronakh; Analisis de los accidentes graves que pueden producirse en los reactores experimentales rapidos de potencia cero

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, G.; Barts, E. W.; Kapil, S.; Tomabechi, K. [Argonne National Laboratory, Argonne, IL (United States)

    1962-03-15

    A study has been made of the possibility, mechanism, and consequence of melt-down and other major nuclear accidents for a ZPR-III type experimental zero-power fast reactor of the two-half type. This study has been supplemented by an evaluation of the importance of the Doppler effect for a wide range of nuclear reactor assemblies for such a reactor. A melt-down event is highly improbable because of the restricted sequence of events which must be postulated. A discussion of the mechanism of the collapse is followed by the results of coupled neutronics-hydrodynamic s calculations for two zero-power assemblies. A 1200-l core has been examined because it represents a relatively large reactor of common core composition. A smaller core with a high-void fraction has been examined as a potentially more dangerous system. Very different time-wise behaviour has been found for the two systems. For sharp accidents in zero-power assemblies, the U{sup 235}-atoms, separated as plates of enriched uranium, will heat very rapidly while the remainder of the core remains essentially cold, so that a gas of U{sup 235}-vapour will provide the disassembly pressure. The adaption of the neutronics-hydrodynamic s code AX-I to the use of a Van der Waals gas is described. Another important change in the equation of state used in the code is to employ a Mie-Griineisen type equation derivable from solid state theory. This change provides a more satisfactory way to evaluate the pressure term for cores of variable composition. Because the highly enriched U{sup 235} plates of a zero-power assembly will heat much more rapidly than the depleted uranium plates, the possibility of a net positive Doppler effect is much larger for an experimental assembly than for the equivalent power breeder reactor. This hazard has been examined for a range of possible assemblies. These calculations indicate that the Doppler coefficient for a zero-power assembly does not become important as a hazard until one approaches

  4. ANALISIS PERIKANAN HUHATE DI PERAIRAN LARANTUKA, FLORES

    Directory of Open Access Journals (Sweden)

    Mohamad Adha Akbar

    2016-11-01

    Full Text Available Informasi mengenai beberapa aspek perikanan huhate sangat diperlukan sebagai bahan untuk perencanaan pengelolaan perikanan yang berkelanjutan. Penelitian ini dilakukan di Larantuka, Flores Timur pada tahun 2014 dengan tujuan untuk menganalisis perikanan huhate sebagai salah satu tulang punggung perikanan TCT. Kegiatan penelitian diprioritaskan pada analisis unit alat tangkap, daerah penangkapan, komposisi hasil tangkapan dan estimasi Total Faktor Produktivitas (TFP perikanan huhate. Basis data pengukuran adalah himpunan  data pendaratan dan observasi lapang. Hasil penelitian menunjukan bahwa karakteristik armada terdiri dari kapal yang terbuat dari fibreglass dengan kisaran bobot kapal 6 - 30 GT. Daerah penangkapan di sekitar perairan Laut Sawu dan Laut Flores. Hasil tangkapan utama didominansi oleh cakalang (Katsuwonus pelamis sebanyak 82%, juwana tuna (Thunnus spp. 17% dan tongkol (Auxis spp. 1% serta hasil tangkapan ikutan lemadang (Coryphaena hippurus dan marlin (Makaira spp. < 1%. Hasil analisis tangkapan per unit upaya (CPUE memberikan nilai rata-rata sebesar 1,1 ton/trip (0,4-1,7 ton/trip dengan nilai tertinggi terjadi pada Februari, sedangkan terendah terjadi pada Januari. Hasil penelitian menunjukkan terdapat hubungan yang signifikan antara tren bulanan CPUE dan nilai TFP.

  5. ANALISIS PENGELOLAAN LINGKUNGAN PERMUKIMAN DI KABUPATEN SOPPENG

    Directory of Open Access Journals (Sweden)

    Bakhrani Rauf

    2016-08-01

    Full Text Available Penelitian ini  bertujuan untuk mendeskripsikan pengelolaan lingkungan permukiman di Kabupaten Soppeng pada aspek: (1 penyediaan dan penanganan lahan terbuka hijau (open space; (2 penyediaan dan penanganan drainase; (3  penanganan sampah; (4 penyediaan dan penanganan pembuangan veses (septic tank. Jenis penelitian ini adalah penelitian kuantitatif dengan pendekatan survei.  Sampel wailayah penelitian ini adalah satu RW di ibu kota kabupaten dan satu RW di desa yang dipilih dengan metode purpossive sampling,  yaitu RW yang sudah maju di ibu kota kabupaten dan RW yang tertinggal di desa. Responden sebanyak 50 kepala keluarga yakni masing-masing 25 kepala keuarga di setiap RW, dipilih dengan  systematic random sampling.  Teknik pengumpulan data yang dilakukan adalah melakukan observasi langsung dan dilengkapi dengan wawancara terhadap responden. Analisis yang digunakan adalah analisis deskriptif. Hasil penelitian menunjukkan bahwa pengelolaan lingkungan permukiman di Kabupaten Soppeng pada aspek: (1 ketersediaan dan penanganan lahan terbuka hijau (open space ditemukan belum memadai; (2 ketersediaan drainase (air kotor dan air hujan ditemukan belum memadai; (3 Penanganan sampahbelum memadai; dan (4 penanganan veses dan penyediaan septic tankbelum memadai.

  6. IDENTIFIKASI MISKONSEPSI SISWA SMP PADA KONSEP FOTOSINTESIS MELALUI ANALISIS GAMBAR

    Directory of Open Access Journals (Sweden)

    Devi Ariandini

    2014-01-01

    Full Text Available Tujuan dari penelitian ini adalah untuk mengidentifikasi miskonsepsi siswa dengan analisis menggambar. Tiga puluh empat siswa di kelas 8 di sekolah menengah pertama digunakan sebagai subyek dalam penelitian ini. Teknik sampel menggunakan teknik purposive sampling. Data yang diperlukan untuk penelitian ini dikumpulkan melalui kuesioner, menggambar analisis rubrik, dan wawancara. Identifikasi Kesalahpahaman ditentukan dengan menggambar siswa berdasarkan menggambar kriteria klasifikasi oleh Kose (2008. Siswa diperintahkan untuk menarik tentang konsep fotosintesis setelah proses pembelajaran. Gambar siswa dianalisis dengan rubrik dan setelah itu mereka diwawancarai. Hasil penelitian menunjukkan tidak semua tingkat kriteria menggambar dari tingkat 1 sampai 5 diidentifikasi. Dari hasil analisa, gambar paling banyak ditemukan adalah pada tingkat 4. Gambar pada tingkat 4 dikategorikan sebagai gambar lengkap konsep fotosintesis dan tidak ada kesalahpahaman ditemukan. Berdasarkan gambar mereka, ada siswa 2,9% diidentifikasi yang diselenggarakan kesalahpahaman. Ada perbedaan jumlah siswa yang diadakan kesalahpahaman antara gambar hasil analisis dan hasil wawancara. Dari hasil wawancara, ada siswa 35,2% dimiliki kesalahpahaman, lebih dari menggambar hasil analisis. Ini berarti bahwa identifikasi kesalahpahaman melalui analisis gambar tidak efektif. Kesalahpahaman siswa yang paling sering terjadi pada konsep fotosintesis adalah tempat berlangsungnya fotosintesis. Faktor yang membuat kesalahpahaman siswa yaitu karena siswa itu sendiri dan lingkungannya. Kata Kunci: fotosintesis, kesalahpahaman, konsep, menggambar analisis

  7. Analisis Tingkat Kepentingan Dan Kinerja Layanan Automated Teller Machine (Atm) Bank Mandiri

    OpenAIRE

    Setiawati, Lenny; Sugiharto, Toto

    2008-01-01

    Penelitian ini ditujukan untuk menganalisis tingkat kepentingan dan kinerja layananATM Bank Mandiri. Analisis Servqual yang terdiri atas dimensi tangible, realibility,responsiveness, assurance,dan empathy digunakan untuk menganalisis kinerjalayanan ATM. Sementara itu, Customer Satisfaction Index dan ImportancePerformance Analysis yang terdiri atas analisis kuadran dan analisis kesenjangandigunakan untuk menginvestigasi kepuasan pelanggan dan untuk mengidentifikasikandimensi layanan yang kiner...

  8. Lista preliminar de las heliconias de Colombia y cinco especies nuevas

    Directory of Open Access Journals (Sweden)

    Kress W. Jhon

    1993-12-01

    Full Text Available A preliminary check list of the 93 species of Heliconia currently recognized from Colombia is provided. Five new species of subgen. Griggsia (H. arrecta, H. donstonea, H. gigantea, H.terciopete y H. titanum from that country are also described, ilustrated, and discussed.Se proporciona una lista preliminar de las 93 especies de Heliconia reconocidas para Colombia. Además se describen, ilustran y comentan cinco especies nuevas pertenecientes al subgénero Griggsia (H. arrecta, H. donstonea, H. gigantea, H. terciopela y H. titanum.

  9. ANALISIS VARIABEL KEUANGAN YANG MEMPENGARUHI KEBIJAKAN DEVIDEN

    Directory of Open Access Journals (Sweden)

    Sumiadji -

    2012-03-01

    Full Text Available Penelitian ini dilakukan untuk menguji pengaruh variabel keuangan yang terdiri dari: rasio pro-fitabilitas (return on assets, likuiditas (cash ratio, rasio hutang (debt to equity ratio, market value (earnings per share, dan perputaran total aset (total assets turnover terhadap kebijakan dividen yang diproksikan dengan dividend payout ratio (DPR pada perusahaan manufaktur yang terdaftar di Bursa Efek Indonesia tahun 2004-2008. Prosedur pemilihan sampel penelitian menggunakan purposive sampling sehingga menghasilkan 8 perusahaan yang memenuhi kriteria sampel. Data sekunder dikumpulkan dengan teknik dokumentasi bersumber dari Indonesian Capital Market Directory (ICMD, laporan keuangan, dan hasil Rapat Umum Pemegang Saham (RUPS. Teknik analisis yang digunakan dalam penelitian ini adalah analisis regresi linear berganda. Hasil penelitian ini adalah secara simultan variabel ROA, CR, DER, EPS dan TATO berpengaruh terhadap DPR. Secara parsial variabel yang mempengaruhi DPR adalah CR, EPS dan TATO. Varabel lainnya, yaitu ROA dan DER ditemukan tidak berpengaruh terhadap DPR. This research was conducted to examine the influence of the financial variables which consists of: return on assets (ROA, cash ratio (CR, debt to equity ratio (DER, earnings per share (EPS, and total asset turnover (TATO to the dividend policy that indicated by the dividend payout ratio (DPR of listed manufacturing company in Indonesia Stock Exchange  2004 to 2008. The sample selection procedure used was a purposive sampling so that it produced eight companies that met the sample criteria. Se-condary data was collected by the documentation technique were obtained from the Indonesian Capital Market Directory (ICMD, financial statements, and the results of the Annual General Meeting of Shareholders. The analysis technique used was multiple linear regression analysis. The research found that five variables of kind of ROA, CR, DER, EPS dan TATO simultaneously influence to dividend

  10. ANALISIS VARIABILITAS CURAH HUJAN DAN SUHU DI BALI

    Directory of Open Access Journals (Sweden)

    Ogi Setiawan

    2017-01-01

    Full Text Available Indonesia sebagai negara kepulauan yang terdiri dari pulau-pulau besar dan kecil menjadi sangat rentan terhadap dampak perubahan iklim. Salah satu pulau yang juga rentan terhadap perubahan iklim adalah pulau Bali. Dampak potensial adanya perubahan iklim adalah perubahan pola hujan, peningkatan suhuudaradankenaikanpermukaanlaut. Sektoryangakanmenerimadampakperubahaniklimdengan serius adalah sektor kehutanan dan pertanian. Untuk mendukung upaya mitigasi dan adaptasi maka diperlukan informasi perubahan iklim yang terjadi. Penelitian ini bertujuan untuk mengetahui variabilitas iklim di Bali. Metode yang digunakan adalah analisis kecenderungan curah hujan, analisis perubahan suhu udara, analisis perubahan tipe iklim dan analisis pergeseran bulan basah, lembab dan kering. Data hujan yang digunakan adalah data hujan dari GPCC (1961-1998 dan BMKG Bali (19992008, sedangkan data suhu berasal dari BMKG Bali (2004-2008. Hasil analisis menunjukkan bahwa di pulau Bali secara umum sudah mengalami perubahan iklim. Tipe iklim berdasarkan Schmidt-Ferguson mengalami perubahan dari relatif basah menjadi agak kering. Suhu udara rata-rata bulanan serta curah hujan bulanan dan tahunan memiliki kecenderungan yang semakin meningkat. Bulan basah dan bulan kering telah mengalami pergeseran dan perubahan jumlahnya. Dampak perubahan iklim terhadap ekosistem hutan di Bali belum diketahui dengan pasti, namun terdapat beberapa implikasi perubahan iklim terhadap sektor kehutanan diantaranya kebakaran hutan dan perubahan jadwal penanaman.

  11. ANALISIS SEBARAN RADIONUKLIDA PADA KONDISI NORMAL UNTUK REAKTOR AEC 1000 MW

    Directory of Open Access Journals (Sweden)

    Sri Kuntjoro

    2015-03-01

    Full Text Available Telah dilakukan analisis sebaran radionuklida pada reaktor daya Atomic Energy Agency (AEC 3568 MWTh, setara dengan 1000 Mwe untuk kondisi operasi normal. Analisis dilakukan untuk dua reaktor yang terpisah sejauh 500 m dan sudut 90o satu dengan yang lain. Langkah awal dalam melakukan analisis adalah menentukan suku sumber reaktor menggunakan program komputer ORIGEN2 dan EMERALD NORMAL. ORIGEN2 digunakan untuk menentukan inventori radionuklida yang terdapat di reaktor. Selanjutnya dengan dengan menggunakan program EMERALD NORMAL dihitung suku sumber yang sampai ke cerobong reaktor. Untuk menganalisis dosis yang diterima penduduk dilakukan dengan menggunakan program PC-CREAM. Perhitungan dilakukan untuk satu dan dua PLTN di calon tapak PLTN. Hasil yang diperoleh adalah sebaran radionuklida terbesar untuk satu PLTN pada jarak 1 km dan kearah zona 9 (191,25o dan untuk dua PLTN pada jarak 1 km dan kearah zona 10 (213,75o. Radionuklida yang sampai ke penduduk melalui dua alur yaitu alur makanan dan hirupan. Untuk alur makanan berasal dari radionuklida I-131, dan terbesar melalui alur produk susu sebesar 53,40 % untuk satu maupun dua PLTN . Untuk alur hirupan ranionuklida pemberi kontribusi paparan terbesar berasal dari Kr-85m sebesar 53,80 %. Dosis total terbesar yang diterima penduduk terdapat pada jarak 1 Km untuk bayi yaitu sebesar 4,10 μSi dan 11,26 μSi untuk satu dan dua PLTN. Hasil ini sangat kecil dibandingkan dengan batas dosis yang diijinkan oleh badan pengawas (BAPETEN untuk penduduk yaitu sebesar 1 mSi. Kata Kunci : Reaktor daya, komputer code, radionuklida, alur makanan, hirupan   Analysis for radionuclide dispersion for the Atomic Energy Agency (AEC 3568 MWth Power Reactor, equal to the 1000 MWe at normal condition has been done. Analysis was done for two piles that is separated by 500 m distance and angle of 90o one to other. Initial pace in doing the analysis is to determine reactors source term using ORIGEN2 and EMERALD NORMAL

  12. ANALISIS SPASIAL KEJADIAN DEMAM BERDARAH DENGUE BERDASARKAN KEPADATAN PENDUDUK

    Directory of Open Access Journals (Sweden)

    Agcrista Permata Kusuma

    2016-01-01

    Full Text Available Abstrak Puskesmas Kedungmundu merupakan wilayah endemis DBD dengan kasus yang tinggi. Diperlukan upaya dalam menentukan kebijakan strategi pengendalian vektor secara efektif dan efisien. Analisis spasial dalam SIG dapat digunakan untuk mengetahui pola penyebaran dan daerah potensi penularan DBD. Jenis penelitian ini adalah penelitian deskriptif analitik menggunakan pendekatan cross sectional. Teknik pengambilan sampel menggunakan sampel wilayah memperhatikan proporsi sampel dengan jumlah sampel 146 responden. Pengambilan titik koordinat menggunakan GPS. Analisis data menggunakan analisis univariat dan analisis spasial. Hasil perhitungan statistik spasial ANN diperoleh nilai Z-score = -11,054 terdapat pola spasial kasus DBD di wilayah kerja Puskesmas Kedungmundu. Nilai ANN = 0,52 < 1, artinya pola penyebaran kejadian DBD yang terjadi adalah berkerumun. Kesimpulan dalam penelitian ini sebaran kasus DBD memiliki keterkaitan secara spasial dengan kepadatan penduduk. Abstract Kedungmundu PHC is an endemich region with a high case. Be required to determine policy of vector control strategies effectively and efficiently. Spatial analsys in GIS can be used to determine the pattern of distribution and areas of DHF potential transmission. The type this research was analysis descriptive with cross sectional approach. The sampling technique used a sample area of attention to the proportion of the sample with 146 respondents of total sample. Capturing the coordinates used GPS. Data analisys used univariat and spatial analisys. Result of ANN obtained a Z-score= -11,054, there was a spatial pattern of dengue cases in Kedungmundu PHC. ANN value = 0,52 < 1, it meant that the pattern of DHF distribution was clustered. The conclution of this research was DHF distribution cases has spatial correlation with density population.

  13. ANALISIS GEN HAEMAGGLUTININ PADA VIRUS CAMPAK LIAR

    Directory of Open Access Journals (Sweden)

    Subangkit Subangkit

    2015-05-01

    Full Text Available AbstrakPenyakit Campak disebabkan oleh virus campak yang termasuk genus Morbilivirus dan Family Paramyxoviridae. Penyakit campak masih menjadi masalah kesehatan karena masih ditemukan Kejadian Luar Biasa (KLB di Indonesia. Salah satu penyebab terjadinya KLB tersebut diduga sebagaiakibat perbedaan antigenesitas antara strain vaksin yang digunakan dengan strain virus campak liar yang beredar di Indonesia. Penelitian ini bertujuan mendapatkan gambaran tentang karakteristik genetik gen Haemagglutinin virus campak liar yang ada di Indonesia. Spesimen yang digunakan sebanyak 27 isolat virus penyebab KLB dari 17 propinsi selama periode tahun 2003-2010. Isolat virus dilakukan pemeriksaan secara RT-PCR dan sekuensing dengan metode Sanger. Hasil sekuensing dianalisis dengan menggunakan perangkat lunak Bioedit 7.0 dan MEGA 4.0. Hasil penelitian didapatkan perbedaan 10 asam amino antara virus campak strain vaksin CAM-70 dan virus campak liar pada posisi D416N; K424T; V451M; N455T; V466I; I473T; F476L; Y481S atau Y481N; H495N; G505D. Kesimpulan penelitian ini adalah terdapat perbedaan karakteristik genetik antara virus campak liar di Indonesia berbeda dengan strain virus vaksin CAM-70.Kata kunci : Campak, Analisis Molekuler, Hemagglutinin, CD46AbstractMeasles is caused by virus belonging to the genus Morbilivirus and Family Paramyxoviridae. Measles is still a public health problem because outbreak of measles still found in Indonesia. Outbreak is suspected as a result of differences in antigenicity between vaccine strains used with wild-type measles virus strains circulating in Indonesia. This study aims to get genetic characteristics of wild-type measles virus haemagglutinin gene in Indonesia. The specimens were used 27 viral isolates from 17 provinces period 2003-2010. Viral isolates examined by RT-PCR and sequencing with Sanger method. Sequencing analysis were conducted using Bioedit 7.0 and MEGA 4.0 software. The results showed 10 amino acid differences

  14. Analisis Kelayakan Finansial Usaha Budidaya Bambu

    Directory of Open Access Journals (Sweden)

    Husnul Khotimah

    2015-12-01

    Full Text Available Budidaya bambu diperlukan untuk menambah populasi bambu yang cenderung berkurang yang disebabkan oleh beralihnya fungsi lahan yang digunakan untuk pemukiman atau diganti dengan komoditi tanaman lain yang dianggap lebih menguntungkan. Sementara itu kebutuhan bahan baku bambu terus meningkat sejalan dengan pertumbuhan penduduk dan perkembangan kemajuan ilmu pengetahuan. Budidaya bambu bermanfaat selain untuk menjaga ketersediaan suplai juga untuk meningkatkan kualitas bambu untuk memenuhi permintaan pasar. Tulisan ini mengkaji analisis finansial dari penanaman bambu. Kajian finansial dibutuhkan untuk menunjukkan bahwa upaya penanaman atau budidaya bambu ini layak atau tidak secara finansial untuk dilakukan. Data yang digunakan adalah data hasil penelitian di perusahaan perkebunan bambu PT XYZ di Lampung. Hasil penelitian menunjukkan bahwa nilai NPV (Rp 36.644.364,08 lebih besar dari nol, Net B/C (2,56 lebih besar dari satu, IRR (11 % lebih besar dari suku bunga 6 %, serta payback period pada tahun ke-9 umur proyek 15 tahun. Berdasarkan kriteria indikator kelayakan finansial dapat disimpulkan bahwa usaha budidaya bambu layak secara finansial untuk diusahakan. Katakunci: Hasil Hutan Bukan Kayu (HHBK, budidaya bambu, studi kelayakan, analisis finansial   Financial analysis and feasibity study of bamboo cultivation  Abstract Bamboo cultivation is necessary to increase the population of bamboo clumps. The bamboo clumps tend to decrease due to the shift of used lands for residential or replaced by other crop comodities, which are considered more profitable. On the other hand, the need of bamboo for raw materials remain increase in line with population growth and the development of science. The important of the bamboo cultivation are to maintain the availability of its supply and to improve the quality of bamboo, which meet the market demands. This paper examined financial analysis of bamboo cultivation. Financial study was necessary to show whether

  15. Nuclear reactors

    International Nuclear Information System (INIS)

    Barre, Bertrand

    2015-10-01

    After some remarks on the nuclear fuel, on the chain reaction control, on fuel loading and unloading, this article proposes descriptions of the design, principles and operations of different types of nuclear reactors as well as comments on their presence and use in different countries: pressurized water reactors (design of the primary and secondary circuits, volume and chemistry control, backup injection circuits), boiling water reactors, heavy water reactors, graphite and boiling water reactors, graphite-gas reactors, fast breeder reactors, and fourth generation reactors (definition, fast breeding). For these last ones, six concepts are presented: sodium-cooled fast reactor, lead-cooled fast reactor, gas-cooled fast reactor, high temperature gas-cooled reactor, supercritical water-cooled reactor, and molten salt reactor

  16. Analisis Korelasi Kanonik Hubungan Perilaku Pemimpin dan Motivasi Kerja Karyawan

    Directory of Open Access Journals (Sweden)

    I Gusti Ayu Made Srinadi

    2014-06-01

    Full Text Available Kualitas pemimpin merupakan penentu keberhasilan organisasi yang dipimpin. Hubungan antara pemimpin dengan karyawannya merupakan hubungan saling ketergantungan yang umumnya tidak seimbang. Dalam proses interaksi yang terjadi antara pemimpin dan karyawan, berlangsung proses saling memengaruhi. Penelitian ini bertujuan untuk mencari hubungan perilaku pemimpin terhadap motivasi kerja karyawan dengan menggunakan analisis korelasi kanonik. Pengujian dengan menggunakan analisis korelasi kanonik menunjukkan bahwa perilaku pemimpin dengan motivasi karyawan memiliki keeratan hubungan dengan nilai korelasi kanonik sebesar 0,9058533. Faktor perilaku pemimpin yang paling tinggi berkorelasi dengan motivasi kerja karyawan di McDonald’s Kuta Beach adalah faktor kemampuan mengarahkan dan menghadapi karyawan dengan nilai korelasi yaitu sebesar 0,7619707.

  17. Analisis Korelasi Kanonik Hubungan Perilaku Pemimpin dan Motivasi Kerja Karyawan

    Directory of Open Access Journals (Sweden)

    I Gusti Ayu Made Srinadi

    2015-04-01

    Full Text Available Kualitas pemimpin merupakan penentu keberhasilan organisasi yang dipimpin. Hubungan antara pemimpin dengan karyawannya merupakan hubungan saling ketergantungan yang umumnya tidak seimbang. Dalam proses interaksi yang terjadi antara pemimpin dan karyawan, berlangsung proses saling memengaruhi. Penelitian ini bertujuan untuk mencari hubungan perilaku pemimpin terhadap motivasi kerja karyawan dengan menggunakan analisis korelasi kanonik. Pengujian dengan menggunakan analisis korelasi kanonik menunjukkan bahwa perilaku pemimpin dengan motivasi karyawan memiliki keeratan hubungan dengan nilai korelasi kanonik sebesar 0,9058533. Faktor perilaku pemimpin yang paling tinggi berkorelasi dengan motivasi kerja karyawan di McDonald’s Kuta Beach adalah faktor kemampuan mengarahkan dan menghadapi karyawan dengan nilai korelasi yaitu sebesar 0,7619707.

  18. Analisis Aliran Daya Berbasis Injeksi Arus dalam Bentuk Vektor

    Directory of Open Access Journals (Sweden)

    Ahmad Wira Satriawan

    2017-11-01

    Full Text Available Tulisan ini memaparkan hasil penelitian yang telah dilakukan untuk membandingkan metode analisis aliran daya berbasis injeksi arus dalam bentuk vektor dengan format polar dan rektangular. Penelitian ini dilakukan untuk memperoleh metode analisa aliran daya dengan perhitungan yang lebih cepat dan akurat, serta iterasi yang lebih sedikit. Metode iterasi Newton Raphson diadopsi dalam penelitian ini dan bahasa pemrograman Python serta library komputasinya digunakan. Analisis terhadap karakteristik konvergensi dari kedua format dilakukan pada IEEE 14-bus Test System. Dari penelitian ini diperoleh hasil bahwa format rektangular lebih unggul dibandingkan format polar untuk kasus yang diteliti.

  19. ANALISIS FAKTOR KEHADIRAN DOSEN DI UNIVERSITAS X

    Directory of Open Access Journals (Sweden)

    Annisa Mulia Rani

    2016-10-01

    Full Text Available Aspek kualitas pekerjaan berkaitan langsung dengan waktu yang khusus digunakan dosen untuk mengembangkan kemampuan. Maka untuk merealisasikan kualitas dosen yang terbaik , pihak manajemen khusunya dekan membuat peraturan untuk kehadiran dosen adalah minimal 25 jam/minggu. Dengan peraturan ini diharapkan dosen dapat melaksanakan beban kerja dosen sebaik-baiknya. Peraturan ini tertulis dan tertuang pada SK Dekan No 20/2006 pada kampus X. Dengan Menggunakan Analisis faktor mencoba menemukan hubungan atar sejumlah variable-variabel yang awalnya saling independen satu dengan yang lain dimana variable penyebab kekurangan jam dosen datang/minggu adalah keluaraga, manajemen, hubungan social, fasilitas pengajaran, jarak/lokasi, kompensasi transport. Berdasarkan uji Bartley test dan Measure sample of adequate yang pertama maka dengan nilai sig 0.04 dan msa 0.540 . Dengan menggunakan metode principal component analysis maka pembentukan factor hanya ada 1 componen karena nilai eigen value yang mempunyai nilai diatas 1. Faktor pembentuk baru yaitu manajemen, kompensasi dan jarak menjadi satu component.

  20. Analisis Gameplay Game Genre Virtual Pet

    Directory of Open Access Journals (Sweden)

    Abi Senoprabowo

    2015-02-01

    Full Text Available Game adalah struktur interaktif yang membuat pemain berjuang menuju sebuah tujuan. Game dapat memberikan emosi dan mood, menghubungkan dengan orang latihan, sarana latihan, serta dapat memberikan edukasi. Salah satu game yang berkembang saat ini adalah game bergenre Virtual pet. Game virtual pet merupakan game simulasi memelihara sesuatu. Virtual pet memiliki gameplay yang menarik dan menyenangkan yang membuat pemain seolah-olah benar-benar memiliki binatang peliharaan mereka sendiri. Virtual pet dianggap oleh sebagian besar penggunanya dapat memberikan kegembiraan serta rasa kasih sayang karena tingkat interaksinya yang baik. Banyak pengembang game pemula yang mengembangkan genre ini sebagai game yang mereka buat karena kemudahaan dan tingkat penggunanya yang banyak. Akan tetapi banyak dari pengembang game pemula tidak memperhatikan tingkat keberlanjutan game virtual pet yang mereka buat sehingga membuat pemain cepat bosan. Pada penelitian ini, analisis game bergenre virtual pet yang sudah sukses dibuat seperti Zombigotchi, Tamagotchi Unicorn, dan Bird Land, diharapkan dapat membantu para pengembang game pemula agar mengetahui cara merancang dan mengembangkan game virtual pet dengan baik. Kata Kunci: game, gameplay, virtual pet

  1. ANALISIS MODEL KEPUASAN TERHADAP PEMBELIAN ULANG

    Directory of Open Access Journals (Sweden)

    Naili Farida

    2014-09-01

    Full Text Available Tujuan penelitian ini yaitu untuk menguji pengaruh brand equity, nilai pelanggan dan lifestyle yang dimediasi kepuasan konsumen terhadap pembelian ulang produk gadget di Kota Semarang. Responden dalam penelitian ini adalah seluruh konsumen yang telah melakukan pembelian produk gadget merek Samsung, sebanyak 120 orang. Teknik sampling yang digunakan yaitu purposive sampling. Teknik analisis yang digunakan yaitu Partial Least Square (PLS. Hasil penelitian menunjukkan bahwa terdapat pengaruh brand equity terhadap kepuasan, namun dalam konteks lifestyle dan nilai pelanggan tidak ada pengaruh terhadap kepuasan. Sedangkan kepuasan menunjukkan adanya pengaruh terhadap pembelian ulang. Diharapkan dari hasil penelitian ini mampu meningkatkan pembelian ulang melalui brand equity, lifestyle dan nilai pelanggan dalam konteks kepuasan. The objective of the research was to test the influence of brand equity, customer value and lifestyle which were mediated by consumer satisfaction toward re-purchasing of gadget products in Semarang. The respondents of the study were all consumers who have purchased Samsung gadget products. It was a purposive sampling study with 120 respondents. The data were analyzed by Partial Least Square (PLS. The result of the study showed that there was an influence of brand equity toward satisfaction, but in the lifestyle context and customer value did not give any influence toward satisfaction. Whereas; the satisfaction gave influence toward re-purchase. It is expected that this study can increase the repurchasethrough brand equity, lifestyle and customer values in the satisfaction context.

  2. ANALISIS POLA MANAJEMEN BAHAN BAKAR DESAIN TERAS REAKTOR RISET TIPE MTR

    Directory of Open Access Journals (Sweden)

    Lily Suparlina

    2015-03-01

    Full Text Available Parameter neutronik dibutuhkan dalam mendesain teras reaktor riset. Reaktor riset jenis MTR (Material Testing Reactor sangat diminati karena dapat digunakan baik untuk riset dan juga produksi radio isotop. Reaktor riset yang ada saat ini sudah tua sehingga dibutuhkan desain reaktor yang mempunyai teras kompak. Desain teras reaktor riset yang sudah ada saat ini belum cukup memadai untuk memenuhi persyaratan di dalam UCD yang telah ditetapkan yaitu fluks neutron termal di teras 1x1015 n/cm2s, oleh karena itu perlu dibuat desain teras reaktor baru sebagai alternatif yang kompak dan dapat menghasilkan fluks neutron tinggi. Telah dilakukan perhitungan dan analisis terhadap manajemen bahan bakar desain teras kompak dengan konfigurasi teras 5x5, berbahan bakar U9Mo-Al dan tinggi teras aktif 70 cm. Tujuan dari riset ini untuk memperoleh fluks neutron di teras memenuhi kebutuhan seperti yang telah ditetapkan di UCD dengan panjang siklus operasi minimum 20 hari pada daya 50 MW. Perhitungan dilakukan dengan menggunakan paket program komputer WIMSD-5B untuk menggenerasi tampang lintang makroskopik bahan bakar dan Batan-FUEL untuk memperoleh nilai parameter neutronik serta Batan-3DIFF untuk perhitungan nilai reaktivitas batang kendali. Perhitungan parameter neutronik teras reaktor riset ini dilakukan untuk bahan bakar U-9Mo-Al dengan tingkat muat bervariasi dan 2 macam pola pergantian bahan bakar yaitu teras segar dan teras setimbang. Hasil analisis menunjukkan bahwa pada teras segar, tingkat muat 235U sebesar 360 gram, 390 gram dan 450 gram memenuhi kriteria keselamatan dan kriteria penerimaan di UCD dengan nilai fluks neutron termal di teras lebih dari 1x1015 n/cm2s dan panjang siklus >20 hari, sedangkan pada teras setimbang panjang siklus dapat terpenuhi hanya untuk tingkat muat 450 gram. Kata kunci: desain teras reaktor, bahan bakar UMo, pola bahan bakar, WIMS, BATAN-FUEL   Research reactor core design needs neutronics parameter calculation use computer

  3. Negociación y documentos preliminares en la contratación internacional

    Directory of Open Access Journals (Sweden)

    Jorge Oviedo Albán

    2012-06-01

    Full Text Available Con el fin de establecer la relevancia de los principios de la buena fe y de libertad de formas, la doctrina y la jurisprudencia han establecido ciertas pautas que deben tenerse en cuenta en el proceso de formación del contrato internacional, así, en estas páginas se fija el análisis de las negociaciones preliminares en los contratos internacionales, en particular el estudio de la Convención de las Naciones Unidas sobre los Contratos de Compraventa Internacional de Mercaderías, y los Principios de Unidroit sobre los Contratos Comerciales Internacionales, apelando no solo al análisis doctrinal de las disposiciones involucradas, sino también al de los casos relevantes fallados por tribunales estatales y arbitrales.

  4. Negociación y documentos preliminares en la contratación internacional

    Directory of Open Access Journals (Sweden)

    Jorge Oviedo Albán

    2012-06-01

    Full Text Available Con el fin de establecer la relevancia de los principios de la buena fe y de libertad de formas, la doctrina y la jurisprudencia han establecido ciertas pautas que deben tenerse en cuenta en el proceso de formación del contrato internacional, así, en estas páginas se fija el análisis de las negociaciones preliminares en los contratos internacionales, en particular el estudio de la Convención de las Naciones Unidas sobre los Contratos de Compraventa Internacional de Mercaderías, y los Principios de Unidroit sobre los Contratos Comerciales Internacionales, apelando no solo al análisis doctrinal de las disposiciones involucradas, sino también al de los casos relevantes fallados por tribunales estatales y arbitrales

  5. Insectos acuáticos de la Meseta del Somuncura, Patagonia, Argentina. Inventario preliminar

    Directory of Open Access Journals (Sweden)

    Javier MUZÓN

    2005-01-01

    Full Text Available Se brinda un inventario preliminar de los insectos acuáticos de la Meseta del Somuncura y su área de influencia (Patagonia, Argentina realizado sobre la base de colecciones y registros previos de especies pertenecientes a los órdenes Ephemeroptera, Odonata, Hemiptera (Heteroptera, Trichoptera, Diptera (familias Ceratopogonidae, Culicidae y Psychodidae y Coleoptera. Se han relevado diversos tipos de ambientes en 14 localidades. El número de especies registrado asciende a 78, agrupadas en 51 géneros y 26 familias, de las cuales 33 se citan por primera vez del área. De los taxa registrados 83% de los géneros corresponden a grupos de amplia distribución (neotropicales, americanos o cosmopolitas, mientras que 41% de las especies presentan una distribución patagónica o andina.

  6. Ferramenta SIG para Modelos de Propagação de Ondas. Desenvolvimentos Preliminares

    OpenAIRE

    Zózimo, A. C.; Charneca, N.; Gonçalves, A.; Fortes, C. J. E. M.

    2005-01-01

    SIMAR é um Sistema Integrado de Modelação da Agitação maRítima, para estudos de propagação e deformação da agitação marítima em zonas costeiras e portuárias. Este Sistema é baseado num Sistema de Informação Geográfica (SIG) e inclui um conjunto de módulos correspondentes aos modelos de propagação e deformação de ondas. A comunicação entre o SIG e os módulos é efectuada por uma interface gráfica construída para o efeito. Nesta comunicação, apresenta-se uma versão preliminar do SIMAR e das s...

  7. ANALISIS KONTRIBUSI PAJAK HOTEL TERHADAP PENDAPATAN ASLI DAERAH KABUPATEN NUNUKAN

    OpenAIRE

    -, MULIATI

    2014-01-01

    2014 Analisis Kontribusi Pajak Hotel terhadap Pendapatan Asli Daerah Kabupaten Nunukan Analysis of The Contributions Tax on Hotel Againts Regional Renenue Nunukan District Muliati Haerial M. Christian Mangiwa Penelitian ini bertujuan untuk mengetahui seberapa besar kontribusi pajak hotel terhadap pendapatan asli daerah, mengetahui sistem pengawasan, dan potensi yang ada untuk meningkatkan pajak hotel, mengetahui sistem dan prosedur...

  8. Analisis Sektor/Sub Sektor Unggulan di Kabupaten Bungo

    Directory of Open Access Journals (Sweden)

    Gafur Gafur

    2016-03-01

    Full Text Available Abstract. This study aimed to analyze the leading sectors in Bungo. The method used is Location Quotient (LQ, Dynamic Location Quotient (DLQ, specialization index, Growth Ratio Model (MRP. Based on analysis of LQ and DLQ, there are only two basis sectors at present and in the future, namely the construction sector and trade, hotels and restaurants. Based on the analysis of Specialization Index, in Bungo Regency has a concentration of the economy in the agricultural sector and the manufacturing sector. Based on MRP analysis also showed that prominent sector growth at the level of Bungo and Jambi Province, namely electricity, gas and water supply; the building sector; and trade, hotels and restaurants. Keywords : Location Quotient (LQ, Dinamic Location Quotient (DLQ, Specialization Index, Growth Ratio Model   Abstrak. Penelitian ini bertujuan untuk menganalisis sektor unggulan di Kabupaten Bungo. Metode yang digunakan adalah analisis Location Quotient (LQ, Dinamic Location Quotient (DLQ, indeks spesialisasi, Model Rasio Pertumbuhan (MRP. Berdasarkan analisis LQ dan DLQ,  hanya ada 2 sektor yang menjadi sektor basis pada saat ini dan pada masa yang akan datang yaitu sektor bangunan dan sektor perdagangan, hotel dan restoran. Berdasarkan analisis Indeks Spesialisasi, di Kabupaten Bungo telah terjadi konsentrasi ekonomi pada sektor pertanian dan sektor industri pengolahan. Berdasarkan analisis MRP juga dapat diketahui bahwa sektor yang menonjol pertumbuhannya pada tingkat Kabupaten Bungo dan Provinsi Jambi yaitu sektor listrik, gas dan air bersih; sektor bangunan; serta sektor perdagangan, hotel dan restoran. Kata Kunci : Location Quotient (LQ, Dinamic Location Quotient (DLQ, indeks spesialisasi, Model Rasio Pertumbuhan

  9. H Reactor

    Data.gov (United States)

    Federal Laboratory Consortium — The H Reactor was the first reactor to be built at Hanford after World War II.It became operational in October of 1949, and represented the fourth nuclear reactor on...

  10. ANALISIS KINERJA DENGAN MENGGUNAKAN PENDEKATAN RASIO CAMEL

    Directory of Open Access Journals (Sweden)

    Sri Murdiati

    2015-06-01

    Full Text Available Tujuan penelitian ini adalah untuk menganalisis tingkat kesehatan bank dilihat dari kategori CAMEL. Metode penelitian yang digunakan adalah studi kasus di PD BPR BKK Banjarharjo.Dalam menguji hipotesis digunakan alat analisis CAMEL. Hasil penelitian ini yaitu modal pada 2008 sampai 2010 termasuk dalam kriteria sehat. ROA meningkat 2008 sampai 2010 dengan kriteria sehat bagi biaya operasional yang dikeluarkan oleh pendapatan operasional yang seimbang. Rasio Kas tahun 2008 sampai 2010 termasuk dalam kriteria sehat berarti bank memiliki kemampuan untuk mengelola asset yang digunakan untuk membayar kewajiban. LDR mengalami tren yang signifikan selama tahun 2008 sampai 2010 sehingga dana yang diterima bank untuk meningkatkan baik tabungan, deposito berjangka, modal inti, yang berarti kemampuan bank untuk meningkatkan penyaluran kredit, IRR menunjukan nilai positif dalam menghadapi resiko pasar.Pengembangan tingkat kesehatan pada tahun 2008 sampai 2010 untuk komponen Capital, Assets, Laba dan Likuiditas meningkat. The goal of this research is to analyze the healtiness of banks seen from CAMEL category. The research applied a case study in PD BPR BKK Banjarharjo. The hypotheses tested using CAMEL analysis tools. The result of the study is that the modal used 2008 until 2010 is consideredin a healthy criteria. The increasing ROA in 2008 until 2010 is considered healthy criteria for operational expenses incurred by the operating income. Such condition meant that the banks are able to manage the assets which are used to pay the obligations. The significant increasing of LDR over the years 2008 until 2010 makes the received funds by the bank to increase the savings deposits, time deposits and the core capital. As the recunts, the banks are able to increase credit disstribution. More over, the IRR showed a positive values in the face of market risks and the development of healthy levels in 2008 until 2010 for the components of Capital, Assets, Earnings and

  11. Comunicación preliminar sobre el uso de la penicilina nebulizada en algunas afecciones del aparato respiratorio

    Directory of Open Access Journals (Sweden)

    Hernán Cortés Maal

    1947-03-01

    Full Text Available El objeto principal de esta comunicación preliminar sobre la terapéutica por las nebulizaciones de penicilina, es el de presentar al honorable cuerpo Médico de Colombia, un procedimiento nuevo en la aplicación de la penicilina, procedimiento que ya se ha generalizado y divulgado bastante en el estranjero y que entre nosotros se ha enmpleado muy poco.

  12. ANALISIS DESAIN PROSES SISTEM PENDINGIN PADA REAKTOR RISET INOVATIF 50 MW

    Directory of Open Access Journals (Sweden)

    Sukmanto Dibyo

    2015-03-01

    Full Text Available Reaktor Riset Inovatif (RRI merupakan jenis MTR (Material Testing Reactor yang dipersiapkan ke depan sebagai desain reaktor baru. Daya RRI telah ditetapkan dari perhitungan neutronik dan termohidrolika teras yaitu 50 MW termal. Reaktor bertekanan 8 kgf/cm2 dan laju aliran massa pendingin primer 900 kg/s. Tantangan yang penting dalam menindak lanjuti desain reaktor ini adalah analisis desain pada sistem pendingin. Makalah ini bertujuan untuk menganalisis desain proses sistem pendingin utama reaktor RRI daya 50 MW (RRI-50 dengan menggunakan program Chemcad 6.1.4. Dalam analisis ini dilakukan perhitungan neraca massa dan energi (mass/energy balances pada sistem pendingin primer dan sekunder sebagai pendingin utama. Masing-masing sistem pendingin tersebut terdiri dari 2 jalur beroperasi secara paralel dan 1 jalur redundansi. Disamping itu untuk desain termal unit komponen telah dianalisis dengan program RELAP5, frenchcreek dan Metoda Analitik. Hasil analisis yang diperoleh adalah desain diagram sistem pendingin yang mencakup data parameter entalpi, temperatur, tekanan dan laju aliran massa pendingin untuk masing-masing jalur. Adapun hasil desain unit komponen utama pada RRI-50 adalah tangki tunda dengan volume 51,5 m3, 2 unit pompa sentrifugal dan 1 unit pompa cadangan pada pendingin primer daya 141 kW/pompa dan pendingin sekunder daya 206 kW/pompa, 2 unit penukar panas tipe shell-tube dengan koefisien termal overall 1377 W/m2.oC dan 4 unit menara pendingin yang mampu melepaskan panas ke udara dengan desain temperatur approach 5,0 oC dan temperatur range 9,0 oC. Desain sistem pendingin reaktor RRI-50 ini telah menetapkan parameter operasi sistem pendingin yaitu temperatur, tekanan dan laju aliran massa pendingin dengan mempertimbangkan tuntutan aspek keselamatan teras reaktor sehingga desain temperatur maksimum pendingin masuk ke teras 44,5 oC. Kata kunci : RRI 50 MW, desain sistem pendingin, program Chemcad 6.1.4   Innovative Research Reactor RRI

  13. Palabras preliminares

    Directory of Open Access Journals (Sweden)

    Cuatrecasas José

    1940-12-01

    Full Text Available Una de las principales manifestaciones del poderoso resurgimiento cultural que disfruta Colombia es la actividad manifiesta en el estudio de las Ciencias Naturales; vocaciones espontaneas surgidas aquí y allá en diversos rincones del país, alimentadas con una gran dosis de celo y con la ciencia adquirida de alguna que otra escuela moderna, ya infiltrada en afán bibliográfico, ya asimilada por haberla buscado donde florecía, van siendo reunidas y sus esfuerzos apoyados, en el Instituto de Ciencias Naturales de la Universidad; Nacional.

  14. A contribution to the analysis of the thermal behaviour of Fast Breeder fuel rods with UO{sub 2}-PuO{sub 2} fuel; Contribucion al analisis del comportamiento termico de las barras combustibles de UO{sub 2}-PuO{sub 2} de los reactores rapidos

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Jimenez, J; Elbel, H

    1977-07-01

    The fuel of Fast Breeder Reactors which consists of Uranium and Plutonium dioxide is mainly characterized by the amount and distribution of void volume and Plutonium and the amount of oxygen. Irradiation experiments carried out with this fuel have shown that initial structure of the fuel pellet is subjected to large changes during operation. These are consequences of the radial and axial temperature gradients within the fuel rods. (Author) 54 refs.

  15. Analisis Pembiayaan Kesehatan Keluarga Penderita Talasemia

    Directory of Open Access Journals (Sweden)

    Arif Kurniawan

    2013-04-01

    Full Text Available Pembiayaan kesehatan sekitar 146 (60% penderita talasemia di Banyumas, tahun 2011 ditanggung rumah tangga dalam bentuk pembayaran langsung (out of pocket payment. Penelitian ini bertujuan untuk menganalisis ability to pay, willingness to pay, dan need assessment pembiayaan kesehatan penderita talasemia di Kabupaten Banyumas. Jenis penelitian ini adalah observasional analitik dengan rancangan studi kasus. Penelitian ini menggunakan desain studi cross sectional dengan teknik pengambilan sampel simple random sampling. Jumlah sampel penelitian 30 responden yang mempunyai anggota keluarga penderita talasemia di Kabupaten Banyumas. Hasil penelitian menunjukkan keluarga penderita talasemia mempunyai ability to pay rata-rata adalah Rp34.448,8/bulan dan rata-rata willingness to pay pengobatan talasemia adalah Rp133.833,3/ bulan. Pola pembiayaan kesehatan talasemia di Kabupaten Banyumas menggunakan 93,3% Jaminan Kesehatan Masyarakat (Jamkesmas, 3,3% biaya sendiri, dan 3,3% asuransi kesehatan. Sebelum mendapatkan Jamkesmas, 90,0% responden membayar dengan out of pocket, berhutang, berhemat pada kebutuhan nonkesehatan, dan menjual perhiasan/sawah. Kebutuhan pelayanan kesehatan yang diharapkan keluarga penderita talasemia adalah konsultasi talasemia dan desain khusus ruang perawatan anak. Kebutuhan pembiayaan kesehatan keluarga penderita talasemia adalah uang transportasi ke rumah sakit sebagai bentuk biaya tidak langsung. Health financing of majority thalassemia patients, around 146 people (60% in Banyumas year 2011 is assured by Households in direct payments to health care providers (out-of-pocket payment. This study aimed to analyze the ability to pay, willingness to pay, and need assessment of health financing thalassemia in Banyumas. This research an analytic observation- Analisis Pembiayaan Kesehatan Keluarga Penderita Talasemia Health Financing Analysis of Thalassemia Patient Family Arif Kurniawan, Arih Diyaning Intiasari al with case study design

  16. Reactor Physics

    International Nuclear Information System (INIS)

    Ait Abderrahim, A.

    2002-01-01

    SCK-CEN's Reactor Physics and MYRRHA Department offers expertise in various areas of reactor physics, in particular in neutron and gamma calculations, reactor dosimetry, reactor operation and control, reactor code benchmarking and reactor safety calculations. This expertise is applied in the Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 materials testing reactor dosimetry, and the preparation and interpretation of irradiation experiments by means of neutron and gamma calculations. The activities of the Fuzzy Logic and Intelligent Technologies in Nuclear Science programme cover several domains outside the department. Progress and achievements in these topical areas in 2001 are summarised

  17. Reactor Physics

    Energy Technology Data Exchange (ETDEWEB)

    Ait Abderrahim, A

    2001-04-01

    The Reactor Physics and MYRRHA Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis of reactor fuel. This expertise is applied in the Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments by means of neutron and gamma calculations. The activities of the Fuzzy Logic and Intelligent Technologies in Nuclear Science programme cover several domains outside the department. Progress and achievements in these topical areas in 2000 are summarised.

  18. Reactor Physics

    Energy Technology Data Exchange (ETDEWEB)

    Ait Abderrahim, A

    2002-04-01

    SCK-CEN's Reactor Physics and MYRRHA Department offers expertise in various areas of reactor physics, in particular in neutron and gamma calculations, reactor dosimetry, reactor operation and control, reactor code benchmarking and reactor safety calculations. This expertise is applied in the Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 materials testing reactor dosimetry, and the preparation and interpretation of irradiation experiments by means of neutron and gamma calculations. The activities of the Fuzzy Logic and Intelligent Technologies in Nuclear Science programme cover several domains outside the department. Progress and achievements in these topical areas in 2001 are summarised.

  19. Reactor Physics

    International Nuclear Information System (INIS)

    Ait Abderrahim, A.

    2001-01-01

    The Reactor Physics and MYRRHA Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis of reactor fuel. This expertise is applied in the Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments by means of neutron and gamma calculations. The activities of the Fuzzy Logic and Intelligent Technologies in Nuclear Science programme cover several domains outside the department. Progress and achievements in these topical areas in 2000 are summarised

  20. Analisis Komoditi Unggulan Subsektor Tanaman Pangan di Sumatera Utara Tahun 2010 – 2014

    OpenAIRE

    Sinaga, Terry Praganda

    2016-01-01

    Tujuan penelitian ini adalah untuk mengetahui perkembangan produksi komoditi tanaman pangan selama periode tersebut sehingga dapat menganalisis komoditi subsektor tanaman pangan yang menjadi unggulan di Sumatera Utara. Komoditi unggulan tersebut juga dijabarkan untuk setiap kabupatem/kota yang ada di Sumatera Utara. Metode yang digunakan yaitu secara Convenience Sampling, dan metode analisis data dengan menggunakan analisis Location Quotient. Hasil penelitian menyimpulkan ba...

  1. ANALISIS KINERJA KEUANGAN PERUSAHAAN PT. ASURANSI JIWASRAYA (PERSERO) CABANG SULAWESI SELATAN

    OpenAIRE

    ARIANTY, ASTRI

    2012-01-01

    ANALISIS KINERJA KEUANGAN PERUSAHAAN PT. ASURANSI JIWASRAYA (PERSERO) CABANG SULAWESI SELATAN COMPANY FINANCIAL PERFORMANCE ANALYSIS PT. INSURANCE JIWASRAYA (LIMITED) SOUTH BRANCH SULAWESI Astri Arianty Prof. Dr. H. Muhammad Ali, SE., M.S Drs. Armayah Sida, M.Si Analisis terhadap kinerja keuangan perusahaan sangat penting dilakukan untuk mengetahui sejauh mana tingkat pencapaian yang telah diperoleh perusahaan sebagaimana tujuan perusahaan dalam menjalankan proses produk...

  2. Identifiksi Sebaran Litologi berdasarkan Analisis Data Resistivitas di Gunung Wungkal

    OpenAIRE

    Nurul Dzakiya; MGS. Dwiki Nugraha; Nenden L. Sidik; Trias Galena

    2017-01-01

    Analisis data untuk mengidentifikasi sebaran litologi yang memiliki potensi bahan galian industri di Daerah Gunung Wungkal Yogyakarta dengan menggunakan metode resistivitas dan survei geologi permukaan telah dilakukan. Hasil korelasi kedua data tersebut menunjukkan sebaran litologi merupakan pelapukan intrusi batuan beku yang kemudian menghasilkan material lempung (6,0-10 m), lempung pasiran (11-30 m) dan lapukan batuan diorit (30-55 m) yang berada di kedalaman berbeda. Ketebalan batuan di pe...

  3. Analisis Sikap Konsumen terhadap Produk Fashion Lokal dan Impor

    OpenAIRE

    Setiawan, Evelyn

    2014-01-01

    Abstrak: Analisis Sikap Konsumen Terhadap Produk Fashion Lokal dan Impor. Penelitian ini bertujuan untuk menganalisis sikap konsumen terhadap produk fashion lokal dan impor yang akan berpengaruh terhadap keputusan konsumsi. Sampel yang akan digunakan dalam penelitian ini adalah 1.000 mahasiswa dari 10 perguruan tinggi swasta terbesar di Surabaya. Pengambilan data dilakukan dengan metode kuesioner. Hasil pengujian statistik menunjukkan bahwa sebagian besar mahasiswa di Surabaya merasa bangga d...

  4. Uso de Analisis de Covarianza (ANCOVA en investigacion cientifica.

    Directory of Open Access Journals (Sweden)

    Badii, M.H.

    2008-01-01

    Full Text Available The basics of the ANalisis of COVAriance (ANCOVA are given. The objectives and the application of ANCOVA are laid out. Techniques for the estimation of contrasts and for the control and reduction of the degree of error are discussed. The application of a simple ANCOVA using real data is highlighted. The application of this technique in fixing the auxiliary variable in experimentation is emphasized.

  5. Analisis Pemasaran Ayam Ras Pedaging di Pasar Tradisional Kota Medan

    OpenAIRE

    Fachri, Yusrizal

    2017-01-01

    130306044 YUSRIZAL FACHRI, 2017. “Analisis Pemasaran Ayam Ras Pedaging di Pasar Tradisional Kota Medan”. Dibimbing oleh ARMYN HAKIM DAULAY dan NEVY DIANA HANAFI. Penelitian ini bertujuan untuk mengidentifikasi karakteristik lembaga pemasaran, bentuk saluran, fungsi pemasaran, dan menganalisis nilai tambah di lembaga-lembaga pemasaran ayam ras pedaging di pasar tradisional Kota Medan pada April sampai Mei 2017. Penelitian ini menggunakan data primer yang didapatkan dari observasi dan waw...

  6. Metode Pengumpulan dan Analisis Data : Lang Kah Vital Proses Penelitian

    OpenAIRE

    Suprapto, Agus .

    2005-01-01

    The process of data collection and. analysis is one of chains in scientific method that should be done in a research. This part later on will determine the right method in searching and analyzing a way in solving a problem. The data collected should be the ones which are relevant which the essence of research problems, so that the next interpreted data will eventually be concluded as valid. keywords: Pengumpulan data, analisis data,dan metode ilmiah

  7. Reactor operation

    CERN Document Server

    Shaw, J

    2013-01-01

    Reactor Operation covers the theoretical aspects and design information of nuclear reactors. This book is composed of nine chapters that also consider their control, calibration, and experimentation.The opening chapters present the general problems of reactor operation and the principles of reactor control and operation. The succeeding chapters deal with the instrumentation, start-up, pre-commissioning, and physical experiments of nuclear reactors. The remaining chapters are devoted to the control rod calibrations and temperature coefficient measurements in the reactor. These chapters also exp

  8. Reactor safeguards

    CERN Document Server

    Russell, Charles R

    1962-01-01

    Reactor Safeguards provides information for all who are interested in the subject of reactor safeguards. Much of the material is descriptive although some sections are written for the engineer or physicist directly concerned with hazards analysis or site selection problems. The book opens with an introductory chapter on radiation hazards, the construction of nuclear reactors, safety issues, and the operation of nuclear reactors. This is followed by separate chapters that discuss radioactive materials, reactor kinetics, control and safety systems, containment, safety features for water reactor

  9. Preliminary health cancer risk assessment for arsenic exposure in a contaminated area close to a fertilizer plant in Moscow region (Russia); Valutazione preliminare del rischio sanitario cancerogeno per esposizione ad arsenico in un'area contaminata da un'industria di fertilizzanti nella regione di Mosca (Russia)

    Energy Technology Data Exchange (ETDEWEB)

    Zakharova, T. [Moscow Univ., Moscow (Russian Federation). Dept. of Chemistry, Lab. of Industrial Safety, Div. of Chemical Technology; Tatano, F. [Urbino Univ., Urbino (Italy). Facolta' di Scienze Ambientali

    2001-09-01

    - ingestione diretta di suolo - ingestion di prodotti caseari sonon non trascurabili, perlomeno in questa fase preliminare dell'analisi di rischio. Il presente lavoro vuol essere di spunto e confronto per la problematica italiana in tema di valutazione della qualita' dei suoli, in particolare quando destinati ad utilizzo agricolo.

  10. ANALISIS PENGARUH KINERJA LINGKUNGAN TERHADAP KINERJA INDUSTRI KECIL

    Directory of Open Access Journals (Sweden)

    Sukirman -

    2012-03-01

    Full Text Available Tujuan penelitian adalah mengidentifikasi, menganalisis praktik pengelolaan lingkungan pada sentra industri kecil dibandingkan best practices dalam upaya meningkatkan kinerja lingkungan di Kabupaten Pati. Kajian difokuskan pada pengelolaan lingkungan secara efektif dengan melibatkan variabel inisiatif lingkungan, keterlibatan karyawan, dan integrasi dengan supplier. Populasinya adalah seluruh perusahaan Industri Kecil di Kabupaten Pati. Sampel berjumlah 97 perusahaan. Teknik sampling menggunakan kluster sampling, dengan sampel pada sentra industri kecil di Kabupaten Pati.  Analisis menggunakan analisis deskriptif dan analisis komparatif. Hasil penelitian menunjukkan praktik pengelolaan lingkungan pada sentra industri kecil di Kabupaten Pati belum dilaksanakan secara optimal. Sementara itu, variabel integrasi supplier berpengaruh langsung terhadap kinerja perusahaan.The purpose of this study is to identify and to analyze an environmental management practice which is compared to the best practices in order to improve environmental performance in the industrial centers in Pati District. This study focuses on managing the environment effectively by involving environmental initiative variables, employee involvement, and integration of suppliers. Population in this study was all small industrial enterprises in Pati regency which has 97 companies as data samples. Data were collected by using cluster sampling techniques, and samples were taken from small industrial centers in the District of Pati. Data were analyzed by using descriptive and comparative methods. Results of this study showed that environmental management practices in small industrial centers had not been implemented optimally. Meanwhile, supplier integration variables influenced directly toward corporate performance.

  11. Microfinanza: analisi d’impatto di un programma in India

    Directory of Open Access Journals (Sweden)

    Tommaso Rondinella

    2005-03-01

    Full Text Available L’analisi d’impatto dei programmi di microfinanza è uno strumento utile sia per migliorare i servizi offerti sia per garantire ai donatori che il denaro concesso sia utilizzato per programmi efficaci nell’alleviare la povertà. Il presente lavoro è costituito da due parti: la prima è dedicata all’analisi d’impatto, la seconda all’analisi empirica sul campo. L’indagine è stata condotta attraverso l’utilizzo di uno strumento in grado di dare una indicazione chiara dei cambiamenti avvenuti nelle condizioni di vita dei beneficiari e con il pregio di essere applicabile a costi molto ridotti. I risultati ottenuti mostrano in che misura l’accesso al credito cambi le condizioni di vita dei più poveri inducendo consistenti aumenti del reddito familiare, dei risparmi, della diversificazione delle attività produttive e del consumo di cibo. Inoltre si osserva, all’interno dei nuclei familiari, un miglioramento della condizione femminile chiaramente dipendente dalla partecipazione al programma di microcredito

  12. ANALISIS CLUSTER K-MEANS DALAM PENGELOMPOKAN KEMAMPUAN MAHASISWA

    Directory of Open Access Journals (Sweden)

    B. Poerwanto

    2016-12-01

    Full Text Available Abstract. Cluster Analysis, K-Means Algorithm, Student Classification. This study aims to classify students based on learning outcomes for subject the basic of statistics (DDS, which is measured based on attendance, task, midterm (UTS, and final exams (UAS to further used to evaluate learning for subjects that require analysis of quantitative . This study uses k-means cluster analysis to classify the students into three groups based on learning outcomes. After grouped, there are 3 people in the low category, 27 in the medium category and over 70% in the high category.Abstrak. Analisis Cluster K-Means dalam Pengelompokan Kemampuan Mahasiswa. Pene-litian ini bertujuan untuk mengelompokkan mahasiswa berdasarkan hasil belajar mata kuliah dasar-dasar statistika (DDS yang diukur berdasarkan variabel nilai kehadiran, tugas, ujian tengah semester (UTS, dan ujian akhir semester (UAS untuk selanjutnya digunakan untuk mengevaluasi pembelajaran untuk mata kuliah yang membutuhkan kemampuan analisis kuantititatif yang baik. Penelitian ini menggunakan analisis cluster k-means dalam mengelompokkan mahasiswa ke dalam tiga kelompok berdasarkan hasil belajarnya. Seteleh dikelompokkan, terdapat 3 orang yang masuk pada kategori rendah, 27 orang pada kategori sedang dan lebih dari 70% pada kategori tinggi.Kata Kunci: Cluster Analysis, K-Means Algoritma, Klasifikasi Mahasiswa, Universitas Cokroaminoto Palopo

  13. Estetika Tari Minang dalam Kesenian Randai Analisis Tekstual-Kontekstual

    Directory of Open Access Journals (Sweden)

    Sri Rustiyanti

    2013-03-01

    Full Text Available ABSTRACT   This paper reveals textual and contextual Randai, among other things, an analysis of Gerak Ga­ lombang Randai, an analysis of the character of Anak Randai, and at the end of the study series, to reveal the values contained in Randai as a cultural reality, which in principle is an inseparable part of the existence of Minangkabau community as the cultural support. The variety of motion used in Gerak Galombang Randai is not only a decoration of the motion beauty (tangible, but it also can be translated, as well as a symbol or emblem that has educational meanings (intangible, and can be an example of the daily life of the indigenous Minangkabau society.   Keywords: Minang Dance aesthetic, Randai, textual­contextual analysis     ABSTRAK   Tulisan ini mengungkap teksual dan kontekstual Randai, di antaranya, analisis terhadap gerak galombang Randai, analisis karakter tokoh anak Randai, dan sebagai akhir dari rang- kaian penelitian ini, mengungkapkan nilai-nilai yang terdapat pada Randai sebagai realitas budaya, yang pada prinsipnya merupakan bagian yang tak dapat dipisahkan dari eksistensi masyarakat Minangkabau sebagai penyangga kebudayaan. Ragam gerak yang digunakan dalam gerak galombang Randai itu kiranya tidak hanya sekedar hiasan keindahan gerak be- laka (tangibel, namun ia dapat diterjemahkan, sekaligus merupakan simbol atau lambang yang bermakna  mendidik (intangibel, dan dapat   menjadi teladan dalam kehidupan se- hari-hari dalam masyarakat adat di Minangkabau.   Kata Kunci: estetika Tari Minang, Randai, analisis tekstual-kontekstual

  14. Analisis Termal High Pressure Feedwater Heater di PLTU PT. XYZ

    Directory of Open Access Journals (Sweden)

    Maria Ulfa Damayanti

    2017-01-01

    Full Text Available Abstrak- PT. XYZ mengoperasikan tiga unit Pembangkit Listrik Tenaga Uap (PLTU unit 3, 7 dan 8 berkapasitas 2.030 MegaWatt. Pada PLTU Paiton unit 7 dan 8 terdapat delapan buah feedwater heater yaitu empat buah Low Pressure Water Heater (LPWH, tiga buah High Pressure Water Heater (HPWH, dan sebuah dearator. Pada PLTU Paiton unit 7 dan 8 terdapat kerusakan pada HPWH 6 yang menyebabkan penurunan efisiensi dari siklus secara keseluruhan. Penurunan efisiensi dapat terjadi karena temperatur feedwater sebelum masuk ke boiler terlalu rendah, sehingga kalor yang dibutuhkan oleh boiler untuk memanaskan feedwater meningkat. Oleh karena itu konsumsi batubara akan meningkat dan menyebabkan terjadi kenaikan biaya operasional harian dalam sistem pembangkit. Dari data Divisi Produksi PT. XYZ Unit 7 dan 8 diperoleh spesifikasi HPWH 6, 7, dan 8 dan propertis fluida dalam HPWH 6, 7, dan 8. Data tersebut digunakan sebagai dasar analisis termal yang meliputi performa masing-masing HPH. Tahap selanjutnya dalam analisis termal adalah memvariasikan beban 25%, 50%, 75%, 100%, dan 105%. Tahap terakhir analisis adalah menghitung performa dengan variasi sumbatan (plug 5%, 10%, 15%, dan 20% sesuai dengan variasi beban. Hasil yang didapatkan dari penelitian tugas akhir ini adalah nilai effectiveness tertinggi tercapai pada pembebanan 100% serta menghasilkan pressure drop tertinggi pada pembebanan 105%, nilai effectiveness terbesar serta nilai pressure drop terkecil terjadi pada zona Condensing, serta sumbatan (plugging pada HPH akan menyebabkan penurunan nilai effectiveness dan kenaikan pressure drop sisi tube.

  15. O literal e a surpresa: os "estágios preliminares do chiste"

    Directory of Open Access Journals (Sweden)

    Ana Beatriz Freire

    2008-12-01

    Full Text Available Vai-se discorrer sobre a função que as intervenções humorísticas podem desempenhar no tratamento de psicóticos, ao apaziguar a incidência do pulsional e suscitar a tomada de palavra por aqueles cuja existência não é balizada pelo falo. Para tanto, partiu-se da referência ao "chiste", efeito humorístico freudiano por excelência. A hipótese que aqui se desenha é a de que as vicissitudes econômicas relacionadas ao chiste, mesmo em seus estágios preliminares, podem esclarecer se e como tais intervenções podem ser efetivas num tratamento possível da psicose.The literal and the surprise: the preliminary stages of the wit. The target of this text is to explain in which way some humoristic interventions could help in the treatment of psychotic patients, pacifying the incidence of the "pulsional" and making the person, whose existence is not limited by the phallus, to start using speech. With this aim, our starting point was the mentioning of a "wit", or joke, the humoristic effect, which is Freudian by excellence. The hypothesis that we foresee is that the economic mishaps related to the wit, even on their preliminary stages, could clarify if and how such interventions could be effective in a possible treatment of psychosis.

  16. Representação e pensamento na obra freudiana: preliminares para uma abordagem cognitiva

    Directory of Open Access Journals (Sweden)

    Fabio Thá

    2004-01-01

    Full Text Available Apresentam-se algumas considerações preliminares para uma abordagem cognitiva da doutrina psicológica presente na obra de Freud. Analisam-se as teorias freudianas da representação, do pensamento e da linguagem, com a finalidade de mostrar a coerência de seus conceitos com modelos que estão sendo debatidos atualmente nas ciências cognitivas. Correlacionando aspectos relevantes da teoria freudiana e alguns conceitos contemporâneos sobre o assunto, procura-se mostrar como os modelos atuais e o modelo freudiano concebem o pensamento como originário da experiência do sujeito, argumentando-se que não há dois processos de pensamento distintos mas diferentes padrões de conexão entre representações.Representation and thought in Freudian theory: introduction to a cognitive approach. This text presents some preliminary considerations for a cognitive approach to Freud's psychological theory of psychoanalysis. It analyses Freudian theories of representation, thinking, and language, in order to show that they are coherent with the cognitive models that are being discussed nowadays in the cognitive sciences. The text links some relevant aspects of the Freudian theory to contemporary concepts and shows how the models discussed and the Freudian models conceive the experiential origin of thought, arguing that there are not two distinct processes of thinking but different patterns of connections involving representations.

  17. Tamizaje fitoquímico preliminar de plantas que crecen en Holguín

    Directory of Open Access Journals (Sweden)

    Armando Payo

    1996-08-01

    Full Text Available Se realizaron pruebas químicas preliminares de detección de aminoácidos, saponinas, taninos, esteroles y triterpenos, glicósidos cardiotónicos, fenoles símples, cumarinas y flavonoides (antocianidinas a 83 partes vegetales de 39 especies, de ellas 34 endémicas, correspondientes a 24 familias de plantas que crecen en Sierra de Nipe, provincia Holguín, para lo cual se utilizó el método establecido por Rondina y Coussio con modificaciones. Se presentan en forma de tablas las familias, géneros y especies ordenadas alfabéticamente, las partes de las plantas investigadas, los resultados químicos obtenidos y las aplicaciones de cada grupo de fitoconstituyentes.Preliminary chemical tests for detecting aminoacids, saponins, tannins, sterols and triterpenes, cardiotonic glycosides, simple pehnols, cumarins and flavonoids (antocyanidins were carried out in 83 vegetable parts from 39 species, 34 of them endemics, corresponding to 24 families of plants growing in Sierra de Nipe, province of Holguin. The method established by Rondina and Coussio was used with modifications. Families, genera, and species in alphabetical order, as well as the parts of plants investigated, the chemical results obtained, and the applications of each group of phytoconstituents, are shown in the tables.

  18. COROTIPOS PRELIMINARES DE PERÚ BASADOS EN LA DISTRIBUCIÓN DE LA FAMILIA ASTERACEAE

    Directory of Open Access Journals (Sweden)

    Berni Britto

    2014-01-01

    Full Text Available El presente estudio se basa en el concepto de categorías corológicas o corotipos para formular una nueva hipótesis de clasificación biogeográfica del Perú basado en la distribución de la familia Astera - ceae. La información recabada dio como resultado que existen 1669 especies de Asteraceae registradas en Perú (hasta el año 2008, distribuidas en 255 géneros. El territorio peruano se dividió en 218 Distritos de Reporte que representan a los 24 departamentos divididos en franjas de 500 m de altitud. La base de datos biogeográficos de Asteraceae se obtuvo cruzando los registros de distribución actualizados con los Distritos de Reporte, expresándose en una matriz de presencia-ausencia. El análisis de datos dio como resultado un total de 14 corotipos preliminares para el Perú: Abiseo, Amotape, Andino, Apurímac-Huan - cavelica, Chachapoyas-Huánuco, Huancabamba, Huascarán, Ica, Lima-Piura, Loreto-Ucayali, Manu, Pasco, Sandia y Tacna.

  19. Nuclear reactors

    International Nuclear Information System (INIS)

    Middleton, J.E.

    1977-01-01

    Reference is made to water cooled reactors and in particular to the cooling system of steam generating heavy water reactors (SGHWR). A two-coolant circuit is described for the latter. Full constructural details are given. (U.K.)

  20. Reactor decommissioning

    International Nuclear Information System (INIS)

    Lawton, H.

    1984-01-01

    A pioneering project on the decommissioning of the Windscale Advanced Gas-cooled Reactor, by the UKAEA, is described. Reactor data; policy; waste management; remote handling equipment; development; and recording and timescales, are all briefly discussed. (U.K.)

  1. RA Reactor

    International Nuclear Information System (INIS)

    1978-02-01

    In addition to basic characteristics of the RA reactor, organizational scheme and financial incentives, this document covers describes the state of the reactor components after 18 years of operation, problems concerned with obtaining the licence for operation with 80% fuel, problems of spent fuel storage in the storage pool of the reactor building and the need for renewal of reactor equipment, first of all instrumentation [sr

  2. Multiregion reactors

    International Nuclear Information System (INIS)

    Moura Neto, C. de; Nair, R.P.K.

    1979-08-01

    The study of reflected reactors can be done employing the multigroup diffusion method. The neutron conservation equations, inside the intervals, can be written by fluxes and group constants. A reflected reactor (one and two groups) for a slab geometry is studied, aplying the continuity of flux and current in the interface. At the end, the appropriated solutions for a infinite cylindrical reactor and for a spherical reactor are presented. (Author) [pt

  3. Nuclear reactor

    International Nuclear Information System (INIS)

    Hattori, Sadao; Sato, Morihiko.

    1994-01-01

    Liquid metals such as liquid metal sodium are filled in a reactor container as primary coolants. A plurality of reactor core containers are disposed in a row in the circumferential direction along with the inner circumferential wall of the reactor container. One or a plurality of intermediate coolers are disposed at the inside of an annular row of the reactor core containers. A reactor core constituted with fuel rods and control rods (module reactor core) is contained at the inside of each of the reactor core containers. Each of the intermediate coolers comprises a cylindrical intermediate cooling vessels. The intermediate cooling vessel comprises an intermediate heat exchanger for heat exchange of primary coolants and secondary coolants and recycling pumps for compulsorily recycling primary coolants at the inside thereof. Since a plurality of reactor core containers are thus assembled, a great reactor power can be attained. Further, the module reactor core contained in one reactor core vessel may be small sized, to facilitate the control for the reactor core operation. (I.N.)

  4. Tingkat Keamanan Konsumsi Residu Karbamat dalam Buah dan Sayur Menurut Analisis Pascakolom Kromatografi Cair Kinerja Tinggi

    Directory of Open Access Journals (Sweden)

    Bambang Wispriyono

    2013-02-01

    Full Text Available Karbamat merupakan salah satu jenis pestisida yang banyak digunakan untuk membasmi hama buah dan sayur. Untuk menentukan bahwa residu karbamat dalam sayuran masih aman dikonsumsi manusia, telah dilakukan analisis beberapa residu karbamat seperti metomil, karbaril, karbofuran, dan propoksur. Sampel-sampel tomat, apel, selada air, kubis, dan sawi hijau dikumpulkan dari tiga supermarket dan satu pasar tradisional di Depok, Jawa Barat. Analisis dilakukan serempak untuk ke empat residu karbamat menggunakan kromatografi cair kinerja tinggi denganpereaksi o-ftalaldehida dan 2-merkaptoetanol dalam reaktor pascakolom dengan detektor fluoresensi. Dari sampel-sampel buah dan sayur yang dianalisis, hanya sawi hijau asal pasar tradisional yang positif mengandung propoksur dengan kadar 1,2 mg/25 gram berat basah (0,048 mg/g berat basah. Dengan Acceptable Daily Intake(ADI propoksur 0,005 mg/kg berat badan/hari, konsumsi sawi hijau harian seberat 20 g/hari masih cukup aman dari gangguan kesehatan akibat pajanan kronik propoksur dengan margin of safety 298,7 (> 100 sebagai batas aman. Carbamat is a group of pesticides which is commonly used to control fruits and vegetables pests. To determine that carbamat residues in fruits and vegetables are safe for human consumption, carbamate residues such as methomyl, carbaryl, carbofuran, and propoxur in vegetables and fruits have been analyzed. Samples of tomato, apple, water lettuces, cabbage, and mustard greens were collected from three supermarkets and one traditional market in Depok, West Java. The analysis was carried out simultaneously for all four carbamate residues by high performance liquid chromatography using o-phtaladehyde and 2 mercaptoethanol reagents in post-column reactor with a fluorescence detector. Of fruits and vegetable samples analyzed, only mustard greens from traditional market positively containe propoxur at 1.2 mg/ 25 gram wet weight (0,048 mg/gram wet weight. With Acceptable Daily Intake (ADI

  5. Nuclear power reactors

    International Nuclear Information System (INIS)

    1982-11-01

    After an introduction and general explanation of nuclear power the following reactor types are described: magnox thermal reactor; advanced gas-cooled reactor (AGR); pressurised water reactor (PWR); fast reactors (sodium cooled); boiling water reactor (BWR); CANDU thermal reactor; steam generating heavy water reactor (SGHWR); high temperature reactor (HTR); Leningrad (RMBK) type water-cooled graphite moderated reactor. (U.K.)

  6. Research reactors

    International Nuclear Information System (INIS)

    Merchie, Francois

    2015-10-01

    This article proposes an overview of research reactors, i.e. nuclear reactors of less than 100 MW. Generally, these reactors are used as neutron generators for basic research in matter sciences and for technological research as a support to power reactors. The author proposes an overview of the general design of research reactors in terms of core size, of number of fissions, of neutron flow, of neutron space distribution. He outlines that this design is a compromise between a compact enough core, a sufficient experiment volume, and high enough power densities without affecting neutron performance or its experimental use. The author evokes the safety framework (same regulations as for power reactors, more constraining measures after Fukushima, international bodies). He presents the main characteristics and operation of the two families which represent almost all research reactors; firstly, heavy water reactors (photos, drawings and figures illustrate different examples); and secondly light water moderated and cooled reactors with a distinction between open core pool reactors like Melusine and Triton, pool reactors with containment, experimental fast breeder reactors (Rapsodie, the Russian BOR 60, the Chinese CEFR). The author describes the main uses of research reactors: basic research, applied and technological research, safety tests, production of radio-isotopes for medicine and industry, analysis of elements present under the form of traces at very low concentrations, non destructive testing, doping of silicon mono-crystalline ingots. The author then discusses the relationship between research reactors and non proliferation, and finally evokes perspectives (decrease of the number of research reactors in the world, the Jules Horowitz project)

  7. Reactor physics and reactor computations

    International Nuclear Information System (INIS)

    Ronen, Y.; Elias, E.

    1994-01-01

    Mathematical methods and computer calculations for nuclear and thermonuclear reactor kinetics, reactor physics, neutron transport theory, core lattice parameters, waste treatment by transmutation, breeding, nuclear and thermonuclear fuels are the main interests of the conference

  8. Calculo Preliminar de la Tasa de Meteorización del Batolito Antioqueño, Cordillera Central, Colombia

    OpenAIRE

    Carolina Garcia; Michel Hermelin

    2004-01-01

    Este trabajo es una estimación preliminar del tiempo necesario para generar la espesa capa de saprolito que caracteriza el perfil de meteorización actual de un batolito cuarzodiorítico cretácico que aflora en altiplanos de la Cordillera Central de Colombia, entre 5º50' y 7º00' de latitud Norte y 74º50' y 75º35' de longitud Oeste y a alturas entre 750 y 2700 m.Se utilizan datos obtenidos previamente mediante el análisis de la composición química de las aguas superficiales d...

  9. LA EXCEPCIÓN PRELIMINAR: FALTA DE COMPETENCIA DE LA CORTE INTERAMERICANA ¿UN MECANISMO EFECTIVO DE DEFENSA ESTATAL?

    OpenAIRE

    Andrés González Serrano

    2011-01-01

    El presente artículo demostrará que la excepción preliminar "falta de competencia en razón a la materia", sí es un mecanismo de defensa estatal efectivo. Sin embargo, también se podrá evidenciar que este mecanismo se ha tornado ineficaz debido que los agentes estatales de los diferentes Estados Parte de la Convención, son quienes han restado importancia a la excepción, al interponerla de forma no adecuada ante la Corte Interamericana de Derechos Humanos.

  10. LA EXCEPCIÓN PRELIMINAR: FALTA DE COMPETENCIA DE LA CORTE INTERAMERICANA ¿UN MECANISMO EFECTIVO DE DEFENSA ESTATAL?

    Directory of Open Access Journals (Sweden)

    Andrés González Serrano

    2011-01-01

    Full Text Available El presente artículo demostrará que la excepción preliminar "falta de competencia en razón a la materia", sí es un mecanismo de defensa estatal efectivo. Sin embargo, también se podrá evidenciar que este mecanismo se ha tornado ineficaz debido que los agentes estatales de los diferentes Estados Parte de la Convención, son quienes han restado importancia a la excepción, al interponerla de forma no adecuada ante la Corte Interamericana de Derechos Humanos.

  11. La Biblioteca Virtual de Salud de la provincia Holguín: un diagnóstico preliminar

    OpenAIRE

    Cañedo Andalia, Rubén; Santiesteban Santiesteban, Mirtha; Sao Avilés, Augusto; Ríos Hidalgo, Nancy; Torres Acosta, Rafael; Díaz Ricardo, Oscar; Rojas García, Yaima; Montejo Castells, Marilis; La O Zaldívar, Juana; Peña Rodríguez, Karen

    2003-01-01

    Con el objetivo de iniciar el desarrollo de la Biblioteca Virtual de Salud de la provincia Holguín, se realizó un diagnóstico preliminar de las condiciones existentes en el territorio para su implementación. Se exponen los conceptos fundamentales relacionados con la biblioteca virtual, se identifican las instituciones con mayor potencial científico en el área, así como los productos y servicios de información con condiciones para trasladarse a un entorno de red. Se establece una estrategia pa...

  12. Voltage stability analysis considering the load dynamic characteristics and the voltage control devices; Analisis de estabilidad de voltaje considerando las caracteristicas dinamicas de la carga y dispositivos de control de voltaje

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez Alvarez, Enrique

    2001-09-15

    de mediano plazo y se interpretan las caracteristicas de estabilidad en el contexto del estudio de sistemas complejos. La herramienta de analisis propuesta se basa en la nocion fisica de que el comportamiento de los sistemas de control de voltaje en los generadores es muy rapido respecto al comportamiento de la carga y tiene su principal aplicacion en el estudio preliminar de la estabilidad de voltaje de mediano y largo plazo. A partir de este modelo, se propone una herramienta analitica basada en la aplicacion de tecnicas de analisis lineal para abordar el problema de determinacion de areas criticas de voltaje y la contribucion de dispositivos de control al mejoramiento de la estabilidad de voltaje. Por ultimo, se presenta la aplicacion de los metodos de estudio propuestos al analisis de estabilidad de voltaje en una red electrica derivada del sistema Peninsular Mexicano. Se discute la influencia de dispositivos de control de voltaje en el fenomeno de estabilidad y se presenta una comparacion con los resultados obtenidos mediante otras tecnicas de analisis, especificamente, el estudio de curvas Q-V y el analisis modal de las ecuaciones de flujos de potencia.

  13. Research reactors

    International Nuclear Information System (INIS)

    Kowarski, L.

    1955-01-01

    It brings together the techniques data which are involved in the discussion about the utility for a research institute to acquire an atomic reactor for research purposes. This type of decision are often taken by non-specialist people who can need a brief presentation of a research reactor and its possibilities in term of research before asking advises to experts. In a first part, it draws up a list of the different research programs which can be studied by getting a research reactor. First of all is the reactor behaviour and kinetics studies (reproducibility factor, exploration of neutron density, effect of reactor structure, effect of material irradiation...). Physical studies includes study of the behaviour of the control system, studies of neutron resonance phenomena and study of the fission process for example. Chemical studies involves the study of manipulation and control of hot material, characterisation of nuclear species produced in the reactor and chemical effects of irradiation on chemical properties and reactions. Biology and medicine research involves studies of irradiation on man and animals, genetics research, food or medical tools sterilization and neutron beams effect on tumour for example. A large number of other subjects can be studied in a reactor research as reactor construction material research, fabrication of radioactive sources for radiographic techniques or applied research as in agriculture or electronic. The second part discussed the technological considerations when choosing the reactor type. The technological factors, which are considered for its choice, are the power of the reactor, the nature of the fuel which is used, the type of moderator (water, heavy water, graphite or BeO) and the reflector, the type of coolants, the protection shield and the control systems. In the third part, it described the characteristics (place of installation, type of combustible and comments) and performance (power, neutron flux ) of already existing

  14. CFD analysis for the hydrogen transport in the primary contention of a BWR using the codes OpenFOAM and Gas-Flow; Analisis CFD para el transporte de hidrogeno en la contencion primaria de un reactor BWR usando los codigos OpenFOAM y GasFlow

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez P, D. A.

    2014-07-01

    using a limited number of semi-empirical data, and instead, mathematical relationships are used taking into account the various physical phenomena as well the interactions that occur among them, such as heat transfer between the fluid and the solid walls condensation of water vapor on the walls, the turbulent effects in areas of restricted passage, etc. Taking into account these advantages, this study presents a qualitative and quantitative comparison between the CFD codes OpenFOAM and Gas-Flow related to the transport phenomena of Hydrogen and other gases in the primary containment of a BWR reactor. Gas-Flow is a code of commercial license that is well validated, developed in Germany to analyze the transport of gases in nuclear reactor containments. On the other hand, OpenFOAM is an open source CFD code offering several solvers for different phenomena assessments, in this work, the reacting Foam solver is used because it has a strong similarity to the intended application of Hydrogen transport. In this thesis the results obtained using the reacting Foam solver of OpenFOAM for the calculation of transport of Hydrogen are compared with the results of the Gas-Flow code in order to assess if it is feasible to use the open source code OpenFOAM in the case of Hydrogen transport in primary containment of a BWR reactor. Some differences in the qualitative and quantitative results from both codes were found, the differences (with a maximum error rate of 4%) in the quantitative results were found are small and are considered more than acceptable for this type of analysis, moreover, these differences are mainly attributed to the transport models used, mainly because OpenFOAM uses a homogeneous mixture model and Gas-Flow a heterogeneous one. Implementing appropriate solvers in codes like OpenFOAM has the goal to develop own tools that are applicable to the transport of Hydrogen in the primary containment of a BWR reactor and thus, to gain some independence while not relying on

  15. ANALISIS PENERAPAN 8 STANDAR NASIONAL PENDIDIKAN PADA SMP NEGERI 2 DOLOPO KABUPATEN MADIUN

    Directory of Open Access Journals (Sweden)

    Luki Eko Cahyono

    2015-10-01

    Penelitian ini menggunakan desain penelitian Deskriptif Kualitatif. Jenis penelitian adalah studi kasus. Data yang digunakan adalah data Primer. Teknik pengumpulan data yang digunakan adalah wawancara dan dokumentasi. Teknik keabsahan data adalah Triangulasi Sumber dan teknik analisis data yang digunakan adalah pendekatan Strengths, Weakness, Opportunities, dan Threats (Analisis SWOT. Kesimpulan penelitian ini adalah (1 Hasil analisis Strenght (Kekuatan adalah sekolah sudah merencanakan, melaksanakan dan mengevaluasi sebagian besar indikator dalam pemenuhan Standar Nasional Pendidikan sehingga meningkatkan mutu pendidikan sekolah. (2 Hasil analisis Weakness (kelemahan adalah keterbatasan anggaran dana dan sumber daya manusia baik peserta didik, pendidik, maupun tenaga kependidikan dalam pemenuhan seluruh unsur Standar Nasional Pendidikan. (3 Hasil analisis Opportunities (peluang adalah Pemberian workshop dan pelatihan kepada pendidik dan tenaga kependidikan meningkatkan kualitas pendidikan sekolah, dan perencanaan, pelaksanaan pembiayaan serta evaluasi penganggaran yang baik memberikan dampak positif terhadap semua unsur operasional sekolah maupun sarana prasarana sekolah. (4 Hasil analisis Threats (Tantangan adalah perencanaan, sosialisasi, pelaksanaan dan evaluasi serta tindak lanjut yang tidak dijalankan dengan manajemen yang baik dalam upaya pemenuhan Standar Nasional Pendidikan akan menghambat peningkatan kualitas pendidikan sekolah. (5 Hasil penerapan Standar Nasional Pendidikan pada SMP Negeri 2 Dolopo menggunakan analisis SWOT menunjukkan bahwa Kekuatan lebih besar daripada Kelemahan dan Peluang lebih besar dari Ancaman, yang berarti Standar Nasional Pendidikan telah terpenuhi dan menghasilkan Akreditasi Sekolah nilai A.

  16. ANALISIS SENSITIVITAS TURBULENSI ALIRAN PADA KANAL BAHAN BAKAR PWR BERBASIS CFD

    Directory of Open Access Journals (Sweden)

    Endiah Puji Hastuti

    2015-04-01

    Full Text Available Turbulensi aliran pendingin pada proses perpindahan panas berfungsi untuk meningkatkan nilai koefisien perpindahan panas, tidak terkecuali aliran dalam kanal bahan bakar. Program CFD (CFD=computational fluid dynamics, FLUENT adalah program komputasi berbasis elemen hingga (finite element yang mampu memprediksi dan menganalisis fenomena dinamika aliran fluida secara teliti. Program perhitungan CFD dipilih dalam penelitian ini karena selain akurat juga dapat memberikan visualisasi dengan baik. Penelitian ini bertujuan untuk memahami karakteristika perpindahan panas, massa dan momentum dari dinding rod bahan bakar ke pendingin secara visual, pada medan temperatur, medan tekanan, dan medan energi kinetika pendingin, sebagai fungsi dinamika aliran di dalam kanal, pada kondisi tunak dan transien. Analisis dinamika aliran pada kanal bahan bakar PWR berbasis CFD dilakukan dengan menggunakan sampel data reaktor PWR dengan daya 1000 MWe dengan susunan bahan bakar 17x17. Untuk menguji sensitivitas persamaan aliran yang sesuai dengan model aliran turbulen pada kanal bahan bakar dilakukan pemodelan dengan menggunakan persamaan k-omega (Ƙ-ω, k-epsilon (Ƙ-ε, dan Reynold stress model (RSM. Pada analisis sensitivitas aliran turbulen di dalam kanal digunakan model mesh hexahedral dengan memilih tiga geometri sel yang masing masing berukuran 0,5 mm; 0,2 mm dan 0,15 mm. Hasil analisis menunjukkan bahwa pada analisis kondisi tunak (steady state, terdapat hasil yang mirip pada model turbulen Ƙ-ε standard dan Ƙ-ω standard. Pengujian terhadap kriteria Dittus Boelter untuk bilangan Nusselt menunjukkan bahwa model Reynold stress model (RSM direkomendasikan. Analisis sensitivitas terhadap geometri mesh antara sel yang berukuran 0,5 mm, 0,2 mm dan 0,15 mm, menunjukkan bahwa geometri sel sebesar 0,5 mm telah mencukupi. Aliran turbulen berkembang penuh telah tercapai pada model LES dan DES, meskipun hanya dalam waktu singkat (3 s, model LES memerlukan waktu komputasi

  17. Aspectos preliminares del manejo reproductivo en cautiverio de la doncella (Ageneiosus pardalis Lütken, 1874

    Directory of Open Access Journals (Sweden)

    Pedro Contreras C.

    2012-12-01

    Full Text Available Objetivo. Evaluar procedimientos de manejo en cautiverio de ejemplares maduros de doncella Ageneiosus pardalis, con fines de reproducción y presentar una descripción preliminar del desarrollo embrionario y larvario para la especie. Materiales y métodos. Sobre ejemplares mantenidos en cautiverio se adelantaron dos ensayos de reproducción, así: a inducción con extracto de hipófisis de carpa EHC para la espermiación (4 mg/kg; una dosis intraperitoneal y para la ovulación (0.5 y 5 mg/kg; intraperitoneales, 0 y 12 horas; b inducción únicamente sobre hembras mantenidas en piletas, sin machos presentes, recolección y seguimiento de ovas. Resultados. Se comprobó la ovulación y la espermiación, pero no se avanzó en el desarrollo embrionario cuando se mezclaron los gametos y fueron incubados. Los ensayos con hembras inducidas, sin machos presentes, confirman el almacenamiento de esperma en los ovarios y los huevos obtenidos mostraron desarrollo embrionario completo, lográndose eclosión de larvas y el mantenimiento de alevinos. Conclusiones. El protocolo convencional de inducción fue efectivo en hembras y machos, pero la mezcla de los gametos no resultó ser un procedimiento viable para la producción de semilla en la especie. Se comprueba el almacenamiento de esperma en las hembras y la emisión espontánea de huevos fertilizados al medio cuando estas son sometidas a inducción. Tanto la forma y el tiempo de almacenamiento de esperma como los mecanismos fisiológicos que ocurren en la fecundación se desconocen.

  18. Ausentismo y organización del espacio. Aportes preliminares en casos patagónicos

    Directory of Open Access Journals (Sweden)

    Santiago Bondel

    2015-04-01

    Full Text Available La presentación se corresponde con avances de un proyecto de investigación1 cuya finalidad principal está vinculada con el entendimiento de nuevas formas de organización de los espacios rurales patagónicos. Se ponen en discusión las posibilidades explicativas que sugieren, en su complejidad, distintas modalidades de tenencia de la tierra, tomando al ausentismo como característica analítica conducente. Metodológicamente concurren planteos de observación sistemática, con relevamientos bibliográficos y a campo, y la generación de referentes tipológicos. Los resultados preliminares muestran un espectro de situaciones diferenciadas en sus lógicas territoriales; así, el perfil económico rural (ganadería, minería, turismo, forestaciones, ahorro y/o especulación inmobiliaria se ve atravesado tanto por lógicas productivas como contemplativas. A todo esto, la organización de los espacios sobrelleva influencias cada vez más activas de varios procesos socio-culturales reivindicativos y/o conservacionistas. Se destaca asimismo el marco de discusión creciente de lo que se da en llamar ‘territorialidad virtual’, cuya asociación con el ausentismo, la sustitución dominial y los cambios en los usos del espacio resultan casi evidentes.La propuesta aspira a reflejar lineamientos básicos en la configuración espacial rural a favor de encontrar argumentos explicativos que permitan contribuir tanto con los enfoques multidisciplinarios que atañen al desenvolvimiento territorial en general, como con el Planeamiento regional.

  19. Resultados psicométricos preliminares de la escala de autoeficacia percibida en maestros de Lima

    Directory of Open Access Journals (Sweden)

    Manuel Fernández Arata

    2012-07-01

    Full Text Available Abstract The perceived self-efficacy is considered as an important concept in many areas of the behavior, especially in teaching performance and stress. This research paper reports the preliminary psychometric findings based on the Perceived Self-Efficacy Scale (Tschannen-Moran & Woolfolk, 2001 in 313 elementary teachers and 352 high school teachers in Lima, Peru. The results concerning item analysis, reliability and internal structure support the psychometric integrity of this instrument in both samples. These results also suggest cross-cultural comparability of the constructs assessed. Given the importance of perceived self-efficacy and stress intervention amongst teachers, this instrument provides a reliable and structurally valid system for measuring these factors. Resumen La autoeficacia percibida es un concepto importante en muchas áreas del comportamiento, y muy especialmente en el desempeño docente y en el estrés. Justamente, el presente artículo de investigación reporta los hallazgos psicométricos preliminares de la aplicación de la Escala de Autoeficacia Percibida (Tschannen-Moran & Woolfolk, 2001 en 313 maestros de enseñanza elemental y 352 de secundaria en Lima, Perú. Los resultados concernientes al análisis de ítems, confiabilidad y estructura interna respaldan la integridad psicométrica de este instrumento en ambos grupos de participantes. Estos resultados también sugieren la comparabilidad intercultural de los constructos evaluados. Dada la relevancia de la eficacia percibida en la investigación y la intervención sobre el estrés docente, el instrumento permite una vía métrica que puede dar información confiable y estructuralmente válida.

  20. Ensayos preliminares de germinación en Puya raimondii Harms (Bromeliaceae

    Directory of Open Access Journals (Sweden)

    Mery L. Suni

    2014-06-01

    Full Text Available Puya raimondii Harms es una especie endémica de la zona altoandina de Perú y Bolivia, cuyas poblaciones y área de distribución se están reduciendo. Con el objetivo de contribuir al conocimiento de los mecanismos de propagación de la especie se realizaron estudios del efecto de la iluminación y estratificación en la germinación de sus semillas. Éstas se colectaron en el rodal de P. raimondii de Huashta Cruz (Pueblo Libre, Áncash en diciembre de 1999 y fueron almacenadas bajo condiciones de laboratorio en Lima, Perú, hasta el momento de los ensayos. Las semillas fueron desinfectadas con hipoclorito de sodio 2,6% y la germinación se realizó en placas petri con agua destilada estéril durante el año 2000. Los resultados preliminares muestran que las semillas de P. raimondii tienen altos valores de porcentaje e índice de velocidad de germinación al ser iluminadas. Efecto semejante tuvo estratificarlas por dos meses a 11 °C o incrementar el tiempo de almacenamiento hasta 8 meses pero resultó negativo aplicar los dos tratamientos a la vez. Se plantea que los altos contenidos de humedad de la semilla, temperatura de almacenamiento así como temperatura de germinación afectan negativamente los valores de germinación.

  1. Estudio de seguridad del acoplamiento de un reactor de alta temperatura (VHTR) con una planta de producción de hidrógeno, análisis de los accidentes relevantes asociados

    OpenAIRE

    Moyart, Quentin

    2008-01-01

    Un estudio preliminar de seguridad dedicado al acoplamiento de un reactor nuclear de muy alta temperatura (Very High Temperature Reactor) con una planta de producción de hidrógeno (HYdrogen Production Plant) según el proceso de electrólisis a alta temperatura (High Temperature Electrolysis) se presenta en esta memoria. La primera parte de este documento está dedicada a las hipótesis de funcionamiento elegidas para el estudio, así como a la breve descripción de las dos instalaciones en el esta...

  2. Reactor container

    International Nuclear Information System (INIS)

    Naruse, Yoshihiro.

    1990-01-01

    The thickness of steel shell plates in a reactor container embedded in sand cussions is monitored to recognize the corrosion of the steel shell plates. That is, the reactor pressure vessel is contained in a reactor container shell and the sand cussions are disposed on the lower outside of the reactor container shell to elastically support the shell. A pit is disposed at a position opposing to the sand cussions for measuring the thickness of the reactor container shell plates. The pit is usually closed by a closing member. In the reactor container thus constituted, the closing member can be removed upon periodical inspection to measure the thickness of the shell plates. Accordingly, the corrosion of the steel shell plates can be recognized by the change of the plate thickness. (I.S.)

  3. Hybrid reactors

    International Nuclear Information System (INIS)

    Moir, R.W.

    1980-01-01

    The rationale for hybrid fusion-fission reactors is the production of fissile fuel for fission reactors. A new class of reactor, the fission-suppressed hybrid promises unusually good safety features as well as the ability to support 25 light-water reactors of the same nuclear power rating, or even more high-conversion-ratio reactors such as the heavy-water type. One 4000-MW nuclear hybrid can produce 7200 kg of 233 U per year. To obtain good economics, injector efficiency times plasma gain (eta/sub i/Q) should be greater than 2, the wall load should be greater than 1 MW.m -2 , and the hybrid should cost less than 6 times the cost of a light-water reactor. Introduction rates for the fission-suppressed hybrid are usually rapid

  4. Nuclear reactor

    International Nuclear Information System (INIS)

    Garabedian, G.

    1988-01-01

    A liquid reactor is described comprising: (a) a reactor vessel having a core; (b) one or more satellite tanks; (c) pump means in the satellite tank; (d) heat exchanger means in the satellite tank; (e) an upper liquid metal conduit extending between the reactor vessel and the satellite tank; (f) a lower liquid metal duct extending between the reactor vessel and satellite tanks the upper liquid metal conduit and the lower liquid metal duct being arranged to permit free circulation of liquid metal between the reactor vessel core and the satellite tank by convective flow of liquid metal; (g) a separate sealed common containment vessel around the reactor vessel, conduits and satellite tanks; (h) the satellite tank having space for a volume of liquid metal that is sufficient to dampen temperature transients resulting from abnormal operating conditions

  5. Analisis Penerimaan PAD Pada Dinas Perikanan dan Peternakan Kabupaten Tebo

    Directory of Open Access Journals (Sweden)

    Eko Purnarianto

    2016-06-01

    Full Text Available Abstract. This study aims to analyze potential, efficiency, effectivity and contribution of PAD admission at Department of Fishery and Animal Husbandry in Tebo Regencyincluding the strategy establishment to increase its revenue.The analysis used is a potential formula, efficiency ratio, effectivity ratio, contributions ratio and SWOT analysis.The results shows that the potential revenue of retribution slaughterhouse (RPH, the potential sales of livestock, and potential sales fishery product are beyond the current target. The efficiency level of retribution slaughterhouse (RPH and sales of fishery product is poor, but the sales of livestock is very efficient. Effectivity level of livestock and fishery product sales are low, whileretribution slaughterhouses(RPH is not effective regarded to its potential  but in the contrary for its target. Contribution of PAD admission of Fishery and Animal Husbandry Department is very low regarded Tebo Regency PAD. The result of SWOT analysis of retribution slaughter house (RPH admission using WO (Weakness-Opportunity strategy, livestock sales using SO (Strength-Oppurtunity strategy, and fishery product sales using ST (strength-threat strategy. Keywords: Retribution SlaughterHouse (RPH, Sales of Fishery, Livestock Sales, SWOT Analysis   Abstrak. Penelitian ini bertujuan untuk menganalisis potensi, efisiensi, efektivitas dan kontribusi penerimaan PAD pada Dinas Perikanan dan Peternakan Kabupaten Teboserta menetapkan strategi untuk peningkatan penerimaan PAD. Analisis yang digunakan adalah rumus potensi, rasio efisiensi, rasio efektivitas, rasio kontribusi dan analisis SWOT.Hasil penelitian menunjukkan bahwa potensi penerimaan retribusi rumah potong hewan (RPH, potensi penjualan hasil peternakan, potensi  penjualan hasil perikanan lebih besar dari target yang telah ditetapkan. Tingkat efisiensi retribusi RPH dan penjualan hasil perikanan tidak efisien, penjualan hasil peternakan sangat efisien. Tingkat

  6. Identifiksi Sebaran Litologi berdasarkan Analisis Data Resistivitas di Gunung Wungkal

    Directory of Open Access Journals (Sweden)

    Nurul Dzakiya

    2017-05-01

    Full Text Available Analisis data untuk mengidentifikasi sebaran litologi yang memiliki potensi bahan galian industri di Daerah Gunung Wungkal Yogyakarta dengan menggunakan metode resistivitas dan survei geologi permukaan telah dilakukan. Hasil korelasi kedua data tersebut menunjukkan sebaran litologi merupakan pelapukan intrusi batuan beku yang kemudian menghasilkan material lempung (6,0-10 m, lempung pasiran (11-30 m dan lapukan batuan diorit (30-55 m yang berada di kedalaman berbeda. Ketebalan batuan di permukaan sekitar 225-231 meter berdasarkan penampang peta geologi dengan arah sebaran dari Barat Laut hingga Tenggara. Proses pelapukan dan alterasi di daerah ini intensif (alterasi argilik dengan jenis morfologi perbukitan intrusi terdenudasi dan dataran Alluvial.

  7. ANALISIS KEAMANAN DATA PADA BLOCK CIPHER ALGORITMA KRIPTOGRAFI RSA

    Directory of Open Access Journals (Sweden)

    Fadhillah Azmi

    2017-01-01

    Full Text Available Komunikasi adalah proses dasar dari pertukaran informasi. Efektifitas komunikasikomputer secara umum adalah melalui internet atau beberapa saluran komunikasi lainnya.Tujuan utama tulisan ini adalah berdasarkan pada analisis hasil yang diberikan Weinermengatakan bahwa jika private key d digunakan dalam algoritma kriptografi RSA kurang darin292, maka sistem tersebut kurang aman. Di sini penulis menganalisa pada hasil yang diberikanoleh Weiner dan mencoba untuk meningkatkan range dari private key d sampai n0.5. Karena nadalah perkalian p dan q, yang mana bilangan relative prima. Sehingga mempengaruhi kinerjaenkripsi algoritma yang lebih aman.

  8. Analisis Derau dalam Perancangan Rangkaian Terintegrasi Op-Amp

    Directory of Open Access Journals (Sweden)

    Siti Sendari

    2009-02-01

    Full Text Available Perancangan IC Op-Amp, memerlukan spesifikasi-spesifikasi yang meliputi parameter proses dan parameter perancangan. Dalam menentukan parameter perancangan, derau merupakan suatu hal yang tidak bisa ditinggalkan, karena derau dapat menentukan keandalan perancangan. Untuk menganalisis derau pada IC Op-Amp langkah pertama yang harus diketahui adalah sumber-sumber derau, setelah itu dilakukan analisis derau baik secara teoritis maupun secara simulasi untuk mengetahui derau yang mungkin terjadi dalam perancangan IC, apakah sudah sesuai dengan spesifikasi yang ditentukan atau tidak. Untuk simulasi derau dapat dilakukan dengan program Spice.

  9. IL NOME IN LIS NEL SEGNATO DI ADULTI UDENTI: UNA INDAGINE PRELIMINARE SUL CORPUS LISAU

    Directory of Open Access Journals (Sweden)

    Matteo La Grassa

    2016-09-01

    Full Text Available L’indagine presenta i primi risultati emersi dall’analisi di una parte del corpus LISAU (LIS di Adulti Udenti sulla produzione segnata del sintagma nominale in LIS da parte di informanti udenti che hanno appreso la LIS come L2 in età adulta. Scopo dell’indagine è cominciare a tracciare una linea di ricerca nell’ambito della linguistica acquisizionale con riferimento all’acquisizione della LIS come L2 da parte di udenti. Il corpus LISAU include il segnato di 7 informanti udenti con livello di competenza omogenea che hanno terminato un corso di terzo livello presso la sede Ente Nazionale Sordi di Prato e di 2 informanti sordi segnanti nativi considerati come gruppo di controllo. L’analisi si è incentrata sulla realizzazione dei nomi di prima e di seconda classe rilevando anche forme non citazionali, sulla realizzazione di forme plurali e sulle modalità di accordo tra nomi e aggettivi. Dalla maggior parte dei dati analizzati si rileva la piena competenza degli informanti nella realizzazione del sintagma nominale. Nouns Signed by hearing adults in LIS: a preliminary survey on the LISAU corpus The results of an analysis concerning part of the LISAU (LIS of  Hearing Adults corpus related to the production of the noun phrase in LIS by hearing informants who learned the LIS L2 in adulthood are presented. The purpose of the investigation was to outline the process with regard to the acquisition of LIS L2 by hearing adults. The LISAU corpus is composed of the sign language of 7 hearing informants with a homogeneous level of competence who completed a third-level course at the Ente Nazionale Sordi in Prato. LISAU also includes the sign language of 2 deaf native signers, considered the control group. The analysis focuses on the first and second-class nouns, including non-citation forms, plural forms and noun-adjective agreement. Most of the analyzed data reveals the informants’ full competence in creating noun phrases.

  10. Nuclear reactor

    International Nuclear Information System (INIS)

    Batheja, P.; Huber, R.; Rau, P.

    1985-01-01

    Particularly for nuclear reactors of small output, the reactor pressure vessel contains at least two heat exchangers, which have coolant flowing through them in a circuit through the reactor core. The circuit of at least one heat exchanger is controlled by a slide valve, so that even for low drive forces, particularly in natural circulation, the required even loading of the heat exchanger is possible. (orig./HP) [de

  11. Heterogeneous reactors

    International Nuclear Information System (INIS)

    Moura Neto, C. de; Nair, R.P.K.

    1979-08-01

    The microscopic study of a cell is meant for the determination of the infinite multiplication factor of the cell, which is given by the four factor formula: K(infinite) = n(epsilon)pf. The analysis of an homogeneous reactor is similar to that of an heterogeneous reactor, but each factor of the four factor formula can not be calculated by the formulas developed in the case of an homogeneous reactor. A great number of methods was developed for the calculation of heterogeneous reactors and some of them are discussed. (Author) [pt

  12. ANÁLISIS PRELIMINAR DEL TRATAMIENTO FISICOQUÍMICO Y BIOLÓGICO DEL ACEITE DIELÉCTRICO PRESENTE EN TIERRA FULLER

    Directory of Open Access Journals (Sweden)

    EDISON ALEXANDER AGUDELO

    2011-01-01

    Full Text Available Este estudio evalúa dos tecnologías: una físico-química y otra biológica, que buscan eliminar la contaminación por el aceite dieléctrico presente en la tierra Fuller, Buscando con ello gestionar de forma ambientalmente adecuada este residuo peligroso. Para la Tecnología físico-química, se usó hexano como solvente y se alcanzó de manera preliminar remociones del aceite dieléctrico del orden del 87% en la tierra Fuller tratada, con una relación tierra Fuller: solvente de 1:8 p/v, una velocidad de agitación de 100 rpm y un tiempo de contacto de 30 minutos. La calidad del aceite dieléctrico recuperado no es apta para su uso en equipos eléctricos, por su baja rigidez dieléctrica, baja densidad y color desfavorable. La tierra Fuller recuperada alcanzó una densidad aparente de 0.623 gr/ml, una densidad real de 2.231 gr/ml y una porosidad de 72.075 %, lo que indica al menos preliminarmente que dicha tierra está muycercana en sus características físicas a la tierra fuller limpia. Para la tecnología biológica se trató la tierra contaminada en un reactor biológico de tierra activada, evaluando la velocidad de agitación y el tiempo de degradación necesario para alcanzar niveles de contaminación adecuados que permitan disponer el residuo en un relleno sanitario convencional sin riesgo para la salud de los ecosistemas y el ser humano, esta fase aún se encuentra en experimentación y los resultados dependen del análisis cromatográfi co del aceite dieléctrico que permanece en la tierra Fuller tratada, en el cual se hará el seguimiento de 10 especies que son clave dentro de este producto, debido a su cantidad y/o toxicidad , falta comprobar la calidad química de la tierra fuller y del aceite dieléctrico recuperados en el tratamiento físico-químico, y validar el proceso biológico para degradar el aceite dieléctrico.

  13. FRACTURE MECHANICS UNCERTAINTY ANALYSIS IN THE RELIABILITY ASSESSMENT OF THE REACTOR PRESSURE VESSEL: (2D SUBJECTED TO INTERNAL PRESSURE

    Directory of Open Access Journals (Sweden)

    Entin Hartini

    2016-06-01

    Full Text Available ABSTRACT FRACTURE MECHANICS UNCERTAINTY ANALYSIS IN THE RELIABILITY ASSESSMENT OF THE REACTOR PRESSURE VESSEL: (2D SUBJECTED TO INTERNAL PRESSURE. The reactor pressure vessel (RPV is a pressure boundary in the PWR type reactor which serves to confine radioactive material during chain reaction process. The integrity of the RPV must be guaranteed either  in a normal operation or accident conditions. In analyzing the integrity of RPV, especially related to the crack behavior which can introduce break to the reactor pressure vessel, a fracture mechanic approach should be taken for this assessment. The uncertainty of input used in the assessment, such as mechanical properties and physical environment, becomes a reason that the assessment is not sufficient if it is perfomed only by deterministic approach. Therefore, the uncertainty approach should be applied. The aim of this study is to analize the uncertainty of fracture mechanics calculations in evaluating the reliability of PWR`s reactor pressure vessel. Random character of input quantity was generated using probabilistic principles and theories. Fracture mechanics analysis is solved by Finite Element Method (FEM with  MSC MARC software, while uncertainty input analysis is done based on probability density function with Latin Hypercube Sampling (LHS using python script. The output of MSC MARC is a J-integral value, which is converted into stress intensity factor for evaluating the reliability of RPV’s 2D. From the result of the calculation, it can be concluded that the SIF from  probabilistic method, reached the limit value of  fracture toughness earlier than SIF from  deterministic method.  The SIF generated by the probabilistic method is 105.240 MPa m0.5. Meanwhile, the SIF generated by deterministic method is 100.876 MPa m0.5. Keywords: Uncertainty analysis, fracture mechanics, LHS, FEM, reactor pressure vessels   ABSTRAK ANALISIS KETIDAKPASTIAN FRACTURE MECHANIC PADA EVALUASI KEANDALAN

  14. Klasifikasi Kecamatan Berdasarkan Nilai Akhir SMA/MA di Kabupaten Aceh Selatan Menggunakan Analisis Diskriminan

    Directory of Open Access Journals (Sweden)

    Fitriana A.R.

    2015-11-01

    Full Text Available Analisis diskriminan merupakan bagian dari analisis peubah ganda. Analisis diskriminan digunakan untuk memodelkan variabel tak bebas yang bersifat kualitatif dengan variabel bebas yang bersifat kuantitatif. Pada penelitian ini, analisis diskriminan lebih dari dua kelompok diterapkan pada data nilai akhir SMA/MA di Kabupaten Aceh Selatan yang bertujuan untuk mendapatkan model untuk pengklasifikasian kecamatan. Pengklasifikasian ini bertujuan untuk melihat perbedaan kualitas siswa SMA/MA yang berada di masing-masing kecamatan Kabupaten Aceh Selatan berdasarkan data nilai akhir. Variabel tak bebas yang digunakan berupa klasifikasi kecamatan berdasarkan rata-rata jumlah nilai akhir SMA/MA yang berada di masing-masing kecamatan yang dibentuk dengan K-Means Cluster. Sedangkan variabel bebas yang digunakan adalah data rata-rata nilai akhir SMA/MA untuk setiap mata pelajaran yang diujiankan pada masing-masing jurusan setiap kecamatan. Model yang didapatkan adalah dua model diskriminan untuk jurusan IPA dan IPS.

  15. La financial education nella regione Puglia: analisi e prospettive di intervento

    OpenAIRE

    A. Garzoni; V. Nastasi

    2010-01-01

    Analisi del contesto e delle principali tematiche di financial education affrontate a livello internazionale e nazionale, valutazione delle opportunità e degli aspetti critici, il progetto pilota nella regione Puglia e le nuove idee di progetto da realizzare

  16. ANALISIS FINANSIAL DAN KELEMBAGAAN RANTAI NILAI MEBEL MAHONI JEPARA

    Directory of Open Access Journals (Sweden)

    Nunung Parlinah

    2011-12-01

    Full Text Available Industri mebel umumnya termasuk dalam industri kecil dan menengah. Selain berperan dalam penerimaan devisa, bisnis di bidang mebel ini juga menciptakan lapangan kerja bagi masyarakat terutama di Kabupaten Jepara. Adanya hubungan (pemberi kepercayaan - (penerima kepercayaan yang terjadi antar aktor atau pelaku di dalam rantai berpengaruh terhadap besarnya distribusi nilai tambah yang diperoleh oleh masingmasing pelaku di sepanjang rantai nilai Tujuan dari penelitian ini adalah mengidentifikasi kelembagaan (aturan yang terjadi antar pelaku di sepanjang rantai nilai mebel mahoni Jepara dan menentukan skenario kebijakan yang dapat mendukung bagi kelestarian industri mebel Jepara. Data yang digunakan meliputi data primer dan data sekunder. Analisis data meliputi identifikasi aktor dan kelembagaan (aturan yang terjadi antar pelaku serta analisis manfaat biaya yang terdiri dari NVP, BCR dan IRR. Hasil penelitian menunjukkan bahwa (1 para pengrajin ( memproduksi mebelnya lebih didasarkan pada pesanan pembeli ( . agent principal Asymetic information yang terjadi antara pedagang kayu dan petani juga telah mengakibatkan posisi petani sebagai (2 Nilai NPV, BCRdan IRR untuk tiap pelaku berbeda-beda tetapi nilai-nilai tersebut mengindikasikan bahwa pola kemitraan yang terjadi antar pelaku dalam rantai nilai mebel mahoni saat ini sudah efektif. Skenario kebijakan yang dapat diterapkan adalah kebijakan yang bersifat insentif bagi petani hutan rakyat, peningkatan kemampuan pengrajin di bidang pemasaran; dan membangun aksi kolektif diantara pengrajin. price taker;

  17. Analisis Rugi Daya Pada Penyulang Bangli Dengan Beroperasinya PLTS Kayubihi

    Directory of Open Access Journals (Sweden)

    I GN Dion Adiputra

    2015-06-01

    Full Text Available Analisis rugi daya pada Penyulang Bangli dilakukan untuk mengetahui perbanding an rugi daya pada jaringan distribusi setelah penempatan pembangkit tersebar jenis PLTS berkapasitas 1 MWp. Lokasi penempatan PLTS ditentukan berdasarkan analisis sensitivitas bus. Nilai sensitivitas bus(?didapat dengan cara membandingkan nilai rugi daya pada sistem dengan total beban yang terhubung pada bus. Penelitian ini menggunakan simulasi aliran daya dengan metode aliran daya Newton-Raphson. Hasil penelitian menunjukkan bus TK 0041 memiliki sensitivitas terbesar dengan nilai ?= 0,178. Dari hasil simulasi aliran daya, penempatan PLTS 1MWp pada lokasi alternatif 1 menghasilkan rugi daya minimum pada Penyulang Bangli yaitu 103,1 kW atau 3,3% dari total suplai daya 3071 kW. Pemasangan PLTS dapat menurunkan rugi daya pada Penyulang Bangli sebesar 57 kW dari total rugi daya pada kondisi tanpa PLTS yaitu 160,1 kW. Bila dibandingkan dengan kondisi eksisting, penem patan PLTS pada lokasi alternatif 1 memiliki selisih rugi daya 7,3 kW lebih kecil dari total rugi daya yang dihasilkan kondisi eksisting sebesar 110,4kW.

  18. Slurry reactors

    Energy Technology Data Exchange (ETDEWEB)

    Kuerten, H; Zehner, P [BASF A.G., Ludwigshafen am Rhein (Germany, F.R.)

    1979-08-01

    Slurry reactors are designed on the basis of empirical data and model investigations. It is as yet not possible to calculate the flow behavior of such reactors. The swarm of gas bubbles and cluster formations of solid particles and their interaction in industrial reactors are not known. These effects control to a large extent the gas hold-up, the gas-liquid interface and, similarly as in bubble columns, the back-mixing of liquids and solids. These hydrodynamic problems are illustrated in slurry reactors which constructionally may be bubble columns, stirred tanks or jet loop reactors. The expected effects are predicted by means of tests with model systems modified to represent the conditions in industrial hydrogenation reactors. In his book 'Mass Transfer in Heterogeneous Catalysis' (1970) Satterfield complained of the lack of knowledge about the design of slurry reactors and hence of the impossible task of the engineer who has to design a plant according to accepted rules. There have been no fundamental changes since then. This paper presents the problems facing the engineer in designing slurry reactors, and shows new development trends.

  19. Reactor safety

    International Nuclear Information System (INIS)

    Butz, H.P.; Heuser, F.W.; May, H.

    1985-01-01

    The paper comprises an introduction into nuclear physics bases, the safety concept generally speaking, safety devices of pwr type reactors, accident analysis, external influences, probabilistic safety assessment and risk studies. It further describes operational experience, licensing procedures under the Atomic Energy Law, research in reactor safety and the nuclear fuel cycle. (DG) [de

  20. Nuclear reactor

    International Nuclear Information System (INIS)

    Mysels, K.J.; Shenoy, A.S.

    1976-01-01

    A nuclear reactor is described in which the core consists of a number of fuel regions through each of which regulated coolant flows. The coolant from neighbouring fuel regions is combined in a manner which results in an averaging of the coolant temperature at the outlet of the core. By this method the presence of hot streaks in the reactor is reduced. (UK)

  1. Reactor container

    International Nuclear Information System (INIS)

    Kato, Masami; Nishio, Masahide.

    1987-01-01

    Purpose: To prevent the rupture of the dry well even when the melted reactor core drops into a reactor pedestal cavity. Constitution: In a reactor container in which a dry well disposed above the reactor pedestal cavity for containing the reactor pressure vessel and a torus type suppression chamber for containing pressure suppression water are connected with each other, the pedestal cavity and the suppression chamber are disposed such that the flow level of the pedestal cavity is lower than the level of the pressure suppression water. Further, a pressure suppression water introduction pipeway for introducing the pressure suppression water into the reactor pedestal cavity is disposed by way of an ON-OFF valve. In case if the melted reactor core should fall into the pedestal cavity, the ON-OFF valve for the pressure suppression water introduction pipeway is opened to introduce the pressure suppression water in the suppression chamber into the pedestal cavity to cool the melted reactor core. (Ikeda, J.)

  2. RA Reactor

    International Nuclear Information System (INIS)

    1989-01-01

    This chapter includes the following: General description of the RA reactor, organization of work, responsibilities of leadership and operators team, regulations concerning operation and behaviour in the reactor building, regulations for performing experiments, regulations and instructions for inserting samples into experimental channels [sr

  3. Reactor physics

    International Nuclear Information System (INIS)

    Ait Abderrahim, H.

    1998-01-01

    Progress in research on reactor physics in 1997 at the Belgian Nuclear Research Centre SCK/CEN is described. Activities in the following four domains are discussed: core physics, ex-core neutron transport, experiments in Materials Testing Reactors, international benchmarks

  4. Pembuatan Dan Analisis Exciter Generator Rf Untuk Siklotron Proton Decy-13

    OpenAIRE

    Prajitno, Prajitno

    2011-01-01

    PEMBUATAN DAN ANALISIS EXCITER GENERATOR RF UNTUK SIKLOTRON PROTON DECY-13.Telah dilakukan analisis dan pembuatan exciter generator RF untuk siklotron proton 13MeV. Generator RFakan digunakan sebagai sumber tegangan pemercepat bolak-Balik siklotron DECY-13 rancangan PTAPBBATAN.Berdasarkan dokumen rancangan dasar yang telah dibuat siklotron Decy-13 akan menggunakanmedan magnet 1,275 Tesla, sehingga frekuensi generator RF bila menggunakan harmonik keempat adalah77,667 MHz. Salah satu teknik pem...

  5. ANALISIS HARGA POKOK PRODUKSI DAN PENERAPAN TARGET COSTING PADA UD WAJUKU MAKASSAR

    OpenAIRE

    -, CHAIDIR HAFID

    2017-01-01

    ABSTRAK Analisis Harga Pokok Produksi dan Penerapan Target Costing pada UD Wajuku Makassar The Analysis of The Cost of Goods Manufactured and Implementation of Target Costing in UD Wajuku Makassar Chaidir Hafid Asri Usman Syahrir Penelitian ini bertujuan untuk mengetahui perhitungan harga pokok produksi baju kaos polos sebelum dan setelah penerapan metode target costing pada UD Wajuku Makassar. Metode pengumpulan data yang digunakan adalah dokumentasi. Metode analisis dat...

  6. PENGUKURAN KINERJA PERUSAHAAN PT. HADJI KALLA DENGAN MENGGUNAKAN ANALISIS ECONOMIC VALUE ADDED

    OpenAIRE

    2013-01-01

    Tujuan dari penelitian ini adalah mengetahui kinerja Economic Value Added (EVA) yang dicapai oleh perusahaan PT. Hadji Kalla, sedangkan metode analisis yang digunakan dalam penelitian ini adalah analisis perkembangan Economic Value Added (EVA), Net Operating Profit After Tax (NOPAT) dan The purpose of this study was to determine the performance of the Economic Value Added (EVA), which is achieved by the company PT. Hadji Kalla...

  7. Reactor core

    International Nuclear Information System (INIS)

    Azekura, Kazuo; Kurihara, Kunitoshi.

    1992-01-01

    In a BWR type reactor, a great number of pipes (spectral shift pipes) are disposed in the reactor core. Moderators having a small moderating cross section (heavy water) are circulated in the spectral shift pipes to suppress the excess reactivity while increasing the conversion ratio at an initial stage of the operation cycle. After the intermediate stage of the operation cycle in which the reactor core reactivity is lowered, reactivity is increased by circulating moderators having a great moderating cross section (light water) to extend the taken up burnup degree. Further, neutron absorbers such as boron are mixed to the moderator in the spectral shift pipe to control the concentration thereof. With such a constitution, control rods and driving mechanisms are no more necessary, to simplify the structure of the reactor core. This can increase the fuel conversion ratio and control great excess reactivity. Accordingly, a nuclear reactor core of high conversion and high burnup degree can be attained. (I.N.)

  8. Reactor container

    International Nuclear Information System (INIS)

    Fukazawa, Masanori.

    1991-01-01

    A system for controlling combustible gases, it has been constituted at present such that the combustible gases are controlled by exhausting them to the wet well of a reactor container. In this system, however, there has been a problem, in a reactor container having plenums in addition to the wet well and the dry well, that the combustible gases in such plenums can not be controlled. In view of the above, in the present invention, suction ports or exhaust ports of the combustible gas control system are disposed to the wet well, the dry well and the plenums to control the combustible gases in the reactor container. Since this can control the combustible gases in the entire reactor container, the integrity of the reactor container can be ensured. (T.M.)

  9. Reactor container

    International Nuclear Information System (INIS)

    Kojima, Yoshihiro; Hosomi, Kenji; Otonari, Jun-ichiro.

    1997-01-01

    In the present invention, a catalyst for oxidizing hydrogen to be disposed in a reactor container upon rupture of pipelines of a reactor primary coolant system is prevented from deposition of water droplets formed from a reactor container spray to suppress elevation of hydrogen concentration in the reactor container. Namely, a catalytic combustion gas concentration control system comprises a catalyst for oxidizing hydrogen and a support thereof. In addition, there is also disposed a water droplet deposition-preventing means for preventing deposition of water droplets in a reactor pressure vessel on the catalyst. Then, the effect of the catalyst upon catalytic oxidation reaction of hydrogen can be kept high. The local elevation of hydrogen concentration can be prevented even upon occurrence of such a phenomenon that various kinds of mobile forces in the container such as dry well cooling system are lost. (I.S.)

  10. Nuclear reactor

    International Nuclear Information System (INIS)

    Tilliette, Z.

    1975-01-01

    A description is given of a nuclear reactor and especially a high-temperature reactor in which provision is made within a pressure vessel for a main cavity containing the reactor core and a series of vertical cylindrical pods arranged in spaced relation around the main cavity and each adapted to communicate with the cavity through two collector ducts or headers for the primary fluid which flows downwards through the reactor core. Each pod contains two superposed steam-generator and circulator sets disposed in substantially symmetrical relation on each side of the hot primary-fluid header which conveys the primary fluid from the reactor cavity to the pod, the circulators of both sets being mounted respectively at the bottom and top ends of the pod

  11. ANALISIS MODEL PREDIKSI AWAL MUSIM HUJAN DI SULAWESI SELATAN

    Directory of Open Access Journals (Sweden)

    Alimatul Rahim

    2016-03-01

    Full Text Available Model prediksi awal musim hujan merupakan salah satu kunci yang dapat digunakan untuk mengurangi resiko kegagalan panen padi yang disebabkan oleh faktor iklim di provinsi Sulawesi Selatan. Model prediksi awal musim hujan dibangun  dengan menggunakan data curah hujan observasi Sulawesi Selatan dan anomali suhu muka laut di kawasan Pasifik dan perairan Sulawesi. Pada studi ini dilakukan analisis pemilihan stasiun hujan observasi, penentuan awal musim hujan, analisis komponen utama dan pengelompokan, analisis korelasi awal musim hujan terhadap anomali suhu muka laut, pembangunan model untuk prediksi awal musimhujan dan verifikasi model.Hasil analisis awal musim hujan menunjukkan setiap stasiun hujan mempunyai perbedaan awal musim hujan dengan rata-rata jatuh pada Julian Date (JD ke-348 (14 Desember. Berdasarkan hasil analisis PCA dan cluster, diperoleh bahwa di Sulawesi Selatan terbagi menjadi 3 cluster wilayah. Cluster 1 mempunyai pola hujan lokal, sedangkan cluster 2 dan 3 mempunyai pola hujan monsun. Pada peta korelasi antara awal musim hujan di Sulawesi Selatan dan anomali suhu muka laut menunjukkan bahwa terdapat korelasi nyata(r≥0.5 antara kawasan Pasifik dan Laut Sulawesi pada cluster 1 dan 2 pada bulan Juni Juli Agustus September(JJAS. Sedangkan pada cluster 3, korelasi nyata hanya pada bulan Juni di perairan Sulawesi. Model prediksi AMH terbaik, pada cluster 2 terdapat di domain prediktor kawasan pasifik dengan nilai r=0.82, sedangkan pada cluster 1 dan 3, terdapat di domain perairan Sulawesi dengan nilai r=0.78 dan r-0.48. Verifikasi model terpilih pada cluster 3 mempunyai RMSE = 3, sedangkan cluster 1 dan 2, nilai RMSE berturut-turut sebesar 16 dan 29.   Model prediction of rainy season onset is one of the keys to reduce the risk of paddy haverst failure because of climate factor in South Sulawesi province. The model prediction for rainy season onset was build using rainfall data in South Sulawesi and SST anomaly in Pacific Ocean and

  12. SIMPOSIO "ASPECTOS MÉDICOS DE LA ERUPCIÓN DEL NEVADO DEL RUIZ". CONCLUSIONES PRELIMINARES

    Directory of Open Access Journals (Sweden)

    Academia Nacional de Medicina

    1986-12-01

    Full Text Available

    El Comité Organizador del Simposio "' Aspéctos Medicos de la Erupción Volcanica del Nevado del Ruiz". confor­mado por los doctores Pablo Gomez Martinez, Jose Felix Patino, Valentin Malagón, German Fernandez. Ivan Munera y Luis Jorge Perez, se permite informar a la opinion publica, las conclusiones preliminares a las que ha llegado despues de haber analizado todas las ponencias presentadas por las personas y entidades que atendieron sobrevivientes de la catastrofe de noviembre de 1985.

    1. Aspectos geológicos

    Colombia está situada en el area denominada Cinturón de Fuego, que envuelve el Oceano Pacifico y en su conformación geográfica se encuentran 30 volcanes, situados en su mayorla en la Cordillera Central. De estos, 11 están en mayor o menor actividad y 7 tienen historia de erupciones. Las capas geol6ógicas sobre las cuales se extiende el pals presentan zonas de elevada sismicidad

    Las caracterlsticas de la erupción del Nevado del Ruiz permiten clasificarlo como un volcan de tipo "'Pliniano- explosivo". que puede emitir enorme cantidad de gases y fragmentos sólidos a grandes velocidades y altas tempe­raturas, como tambien lodo caliente, con deshielo de las nieves perpetuas cuyo resultado es Ia formación del "lahar" que sepultó las poblaciones y cubrió extensas zonas de terreno. Estas erupciones se presentan de manera intermitente y su comportamiento es impredecible. Existe siempre la posibilidad de erupciones late­rales que aumentan su peligro y radio de acción.

    El "lahar" fue una avalancha de lodo que cubrió a la poblacion de Armero; lo componían materiales inorgánicos provenientes del volcan, mezclados con los materiales orgánicos presentes en las tierras fertiles dedicadas a la agricultura y la ganadería. Estudios microbiológicos demostraron la presencia de una rica flora bacteriana y de hongos...

  13. Membandingkan Tingkat Kemiripan Rekaman Voice Changer Menggunakan Analisis Pitch, Formant dan Spectogram

    Directory of Open Access Journals (Sweden)

    Ahmad Subki

    2018-02-01

    Full Text Available Audio forensik merupakan salah satu ilmu yang mnyandingkan antara ilmu pengetahuan dan metode ilmiah dalam proses analisis rekaman suara untuk membantu dan mendukung pengungkapan suatu tindak kejahatan yang diperlukan dalam proses persidangan. Undang-undang ITE No.19 Tahun 2016 menyebutkan bahwa rekaman suara merupakan salah satu alat bukti digital yang sah dan dapat digunakan sebagai penguat dakwaan. Rekaman suara yang merupakan barang bukti digital sangatlah mudah dan rentan dimanipulasi, baik secara sengaja maupun tidak disengaja. Pada penelitian ini dilakukan analisis terkait tingkat kemiripan antara rekaman suara voice changer dengan rekaman suara asli menggunakan analisis pitch, formant dan spectogram, rekaman suara yang dianalisis ada dua jenis rekaman suara yaitu suara laki-laki dan suara perempuan. Rekaman suara voice changer  dan rekaman suara asli, diekstrak menggunakan tools praat kemudian informasi yang diperoleh dianalisis dengan analisis statistik pitch, formant dan spectrogrammenggunakan tools gnumeric. Penelitian ini menghasilkan bahwa analisis rekaman suara voice changer dengan rekaman suara asli dapat menggunakan analisis statistik pitch, formant dan spectrogram, rekaman suara voice changer A memiliki tingkat kemiripan yang paling tinggi dengan rekaman suara asli pada posisi low pitch, sedangkan voice changer yang lain lebih sulit untuk diidentifikasi.

  14. Reactor building

    International Nuclear Information System (INIS)

    Maruyama, Toru; Murata, Ritsuko.

    1996-01-01

    In the present invention, a spent fuel storage pool of a BWR type reactor is formed at an upper portion and enlarged in the size to effectively utilize the space of the building. Namely, a reactor chamber enhouses reactor facilities including a reactor pressure vessel and a reactor container, and further, a spent fuel storage pool is formed thereabove. A second spent fuel storage pool is formed above the auxiliary reactor chamber at the periphery of the reactor chamber. The spent fuel storage pool and the second spent fuel storage pool are disposed in adjacent with each other. A wall between both of them is formed vertically movable. With such a constitution, the storage amount for spent fuels is increased thereby enabling to store the entire spent fuels generated during operation period of the plant. Further, since requirement of the storage for the spent fuels is increased stepwisely during periodical exchange operation, it can be used for other usage during the period when the enlarged portion is not used. (I.S.)

  15. Reactor container

    International Nuclear Information System (INIS)

    Shibata, Satoru; Kawashima, Hiroaki

    1984-01-01

    Purpose: To optimize the temperature distribution of the reactor container so as to moderate the thermal stress distribution on the reactor wall of LMFBR type reactor. Constitution: A good heat conductor (made of Al or Cu) is appended on the outer side of the reactor container wall from below the liquid level to the lower face of a deck plate. Further, heat insulators are disposed to the outside of the good heat conductor. Furthermore, a gas-cooling duct is circumferentially disposed at the contact portion between the good heat conductor and the deck plate around the reactor container. This enables to flow the cold heat from the liquid metal rapidly through the good heat conductor to the cooling duct and allows to maintain the temperature distribution on the reactor wall substantially linear even with the abrupt temperature change in the liquid metal. Further, by appending the good heat conductor covered with inactive metals not only on the outer side but also on the inside of the reactor wall to introduce the heat near the liquid level to the upper portion and escape the same to the cooling layer below the roof slab, the effect can be improved further. (Ikeda, J.)

  16. Nuclear reactor

    International Nuclear Information System (INIS)

    Rau, P.

    1980-01-01

    The reactor core of nuclear reactors usually is composed of individual elongated fuel elements that may be vertically arranged and through which coolant flows in axial direction, preferably from bottom to top. With their lower end the fuel elements gear in an opening of a lower support grid forming part of the core structure. According to the invention a locking is provided there, part of which is a control element that is movable along the fuel element axis. The corresponding locking element is engaged behind a lateral projection in the opening of the support grid. The invention is particularly suitable for breeder or converter reactors. (orig.) [de

  17. DESAIN TERAS PLTN JENIS PEBBLE BED MODULAR REACTOR (PBMR MENGGUNAKAN PAKET PROGRAM MCNP-5 PADA KONDISI BEGINNING OF LIFE

    Directory of Open Access Journals (Sweden)

    Ralind Re Marla

    2015-03-01

    Full Text Available Telah dilakukan desain teras Pembangkit Listrik Tenaga Nuklir (PLTN untuk jenis Pebble Bed Modular Reactor (PBMR dengan daya 70 MWe untuk keperluan proses smelter pada keadaan beginning of life (BOL. Analisis ini bertujuan untuk mengetahui persen pengkayaan, distribusi suhu dan nilai keselamatan dengan koefisien reaktivitas teras yang negatif pada reaktor jenis PBMR apabila daya reaktor 70 MWe. Analisis menggunakan program Monte Carlo N-Particle-5 (MCNP5 dan dari hasil analisis ini diharapkan dapat memenuhi syarat dalam mendukung program percepatan pembangunan kelistrikan batubara 10.000 MWe khususnya untuk proses smelter, yang tersebar merata di wilayah Indonesia. Hasil penelitian menunjukkan bahwa, faktor perlipatan efektif (k-eff Reaktor jenis PBMR daya 70 MWe mengalami kondisi kritis pada pengkayaan 5,626 % dengan nilai faktor perlipatan efektif 1,00031±0,00087 dan nilai koefisien reaktivitas suhu pada -10,0006 pcm/K. Dari hasil analisis daat disimpulkan bahwa reaktor jenis PBMR daya 70 MWe adalah aman.   ABSTRACT The core design of Nuclear Power Plant for Pebble Bed Modular Reactor (PBMR type with 70 MWe capacity power in Beginning of Life (BOL has been performed. The aim of this analysis, to know percent enrichment, temperature distribution and safety value by negative temperature coefficient at type PBMR if reactor power become lower equal to 70 MWe. This analysis was expected become one part of overview project development the power plant with 10.000 MWe of total capacity, spread evenly in territory of Indonesia especially to support of smelter industries. The results showed that, effective multiplication factor (keff with power 70 MWe critical condition at enrichment 5,626 %is 1,00031±0,00087, based on enrichment result, a value of the temperature coefficient reactivity is - 10,0006 pcm/K. Based on the results of these studies, it can beconcluded that the PBMR 70 MWe design is theoritically safe.

  18. ANALISIS KELAYAKAN FINANSIAL WISATA AIR WADUK JATIGEDE KABUPATEN SUMEDANG

    Directory of Open Access Journals (Sweden)

    Bambang Susanto

    2016-04-01

    pendahuluan agar manfaatnya jauh lebih besar dari biaya yang dikeluarkan. Oleh sebab itu untuk kepentingan ilmiah perlu dilakukan kajian akademisnya berupa Analisis kelayakan Finansial. Berdasarkan analisis kelayakan keuangan   ,dapat  disimpulkan bahwa wisata air di Waduk jatigede Kabupaten Sumedang  memberikan manfaat yang lebih dibandingkan dengan biaya yang dikeluarkan . ini dapat dilihat dari hasil analisis net present value yang positif, internal rate of return yang lebih besar dari tingkat bunga bank serta benefit cost yang lebih besar dari satu. Kata Kunci: Kelayakan Finansial; Wisata Air.

  19. ANALISIS RELEVANSI LULUSAN PERGURUAN TINGGI DENGAN DUNIA KERJA

    Directory of Open Access Journals (Sweden)

    Ali Muhson

    2012-04-01

    Full Text Available Abstract: A Relevance Analysis of University Graduates with World of Work. Education should be oriented to the competencies required by the workforce as a percentage of unemployment among the educated increase continuously. This study aims to examine the relevance of YSU Economic Education graduates. The study only focuses on the type of work and subjects taught. The subject of this study is the alumni of Economic Education Study Program. Sampling technique used is snowball sampling. Data collection technique using questionnaires and documentation while the technique of data analysis using descriptive analysis. The result suggests that the majority of the graduates find their first job as private a teacher, a private employee and a tutor, while current job of the most graduates are private teacher, private employee, and civil servant (teacher. The data shows that more than 50 percent of the graduates work in the education area. This implies that the relevance level based on the type of work is categorized as sufficient. Majority of the graduates teaches social science, economic, and entrepreneurship, hence it can be concluded that the relevance level based on the subjects taught is highly relevant.   Keyword: relevance of graduates, type of work, unemployment, employment     Abstrak: Analisis Relevansi Lulusan Perguruan Tinggi dengan Dunia Kerja. Pendidikan harus berorientasi pada kompetensi yang dibutuhkan oleh dunia kerja karena persentase penganggur di kalangan terdidik terus meningkat. Penelitian ini bertujuan untuk mengkaji tingkat relevansi (kesesuaian lulusan Pendidikan Ekonomi UNY. Kajian hanya diarahkan pada jenis pekerjaan dan mata pelajaran yang diampu. Penelitian ini mengambil subjek alumni Prodi Pendidikan Ekonomi dari berbagai angkatan. Teknik sampling yang digunakan adalah snowball sampling. Teknik pengumpulan data menggunakan angket dan dokumentasi sedangkan teknik analisis data menggunakan analisis deskriptif. Penelitian ini

  20. Nuclear reactors

    International Nuclear Information System (INIS)

    Prescott, R.F.

    1976-01-01

    A nuclear reactor containment vessel faced internally with a metal liner is provided with thermal insulation for the liner, comprising one or more layers of compressible material such as ceramic fiber, such as would be conventional in an advanced gas-cooled reactor and also a superposed layer of ceramic bricks or tiles in combination with retention means therefor, the retention means (comprising studs projecting from the liner, and bolts or nuts in threaded engagement with the studs) being themselves insulated from the vessel interior so that the coolant temperatures achieved in a High-Temperature Reactor or a Fast Reactor can be tolerated with the vessel. The layer(s) of compressible material is held under a degree of compression either by the ceramic bricks or tiles themselves or by cover plates held on the studs, in which case the bricks or tiles are preferably bedded on a yielding layer (for example of carbon fibers) rather than directly on the cover plates

  1. Nuclear reactor

    International Nuclear Information System (INIS)

    Miyashita, Akio.

    1981-01-01

    Purpose: To facilitate and accelerate a leakage test of valves of a main steam pipe by adding a leakage test partition valve thereto. Constitution: A leakage testing partition valve is provided between a pressure vessel for a nuclear reactor and the most upstream side valve of a plurality of valves to be tested for leakage, a testing branch pipe is communicated with the downstream side of the partition valve, and the testing water for preventing leakage is introduced thereto through the branch pipe. Since main steam pipe can be simply isolated by closing the partition valve in the leakage test, the leakage test can be conducted without raising or lowering the water level in the pressure vessel, and since interference with other work in the reactor can be eliminated, the leakage test can be readily conducted parallel with other work in the reactor in a short time. Clean water can be used without using reactor water as the test water. (Yoshihara, H.)

  2. Reactor container

    International Nuclear Information System (INIS)

    Abe, Yoshihito; Sano, Tamotsu; Ueda, Sabuo; Tanaka, Kazuhisa.

    1987-01-01

    Purpose: To improve the liquid surface disturbance in LMFBR type reactors. Constitution: A horizontal flow suppressing mechanism mainly comprising vertical members is suspended near the free liquid surface of coolants in the upper plenum. The horizontal flow of coolants near the free liquid surface is reduced by the suppressing mechanism to effectively reduce the surface disturbance. The reduction in the liquid surface disturbance further prevails to the entire surface region with no particular vertical variations to the free liquid surface to remarkably improve the preventive performance for the liquid surface disturbance. Accordingly, it is also possible to attain the advantageous effects such as prevention for the thermal fatigue in reactor vessel walls, reactor upper mechanisms, etc. and prevention of burning damage to the reactor core due to the reduction of envolved Ar gas. (Kamimura, M.)

  3. REACTOR SHIELD

    Science.gov (United States)

    Wigner, E.P.; Ohlinger, L.E.; Young, G.J.; Weinberg, A.M.

    1959-02-17

    Radiation shield construction is described for a nuclear reactor. The shield is comprised of a plurality of steel plates arranged in parallel spaced relationship within a peripheral shell. Reactor coolant inlet tubes extend at right angles through the plates and baffles are arranged between the plates at right angles thereto and extend between the tubes to create a series of zigzag channels between the plates for the circulation of coolant fluid through the shield. The shield may be divided into two main sections; an inner section adjacent the reactor container and an outer section spaced therefrom. Coolant through the first section may be circulated at a faster rate than coolant circulated through the outer section since the area closest to the reactor container is at a higher temperature and is more radioactive. The two sections may have separate cooling systems to prevent the coolant in the outer section from mixing with the more contaminated coolant in the inner section.

  4. NUCLEAR REACTOR

    Science.gov (United States)

    Miller, H.I.; Smith, R.C.

    1958-01-21

    This patent relates to nuclear reactors of the type which use a liquid fuel, such as a solution of uranyl sulfate in ordinary water which acts as the moderator. The reactor is comprised of a spherical vessel having a diameter of about 12 inches substantially surrounded by a reflector of beryllium oxide. Conventionnl control rods and safety rods are operated in slots in the reflector outside the vessel to control the operation of the reactor. An additional means for increasing the safety factor of the reactor by raising the ratio of delayed neutrons to prompt neutrons, is provided and consists of a soluble sulfate salt of beryllium dissolved in the liquid fuel in the proper proportion to obtain the result desired.

  5. Breeder reactors

    International Nuclear Information System (INIS)

    Gollion, H.

    1977-01-01

    The reasons for the development of fast reactors are briefly reviewed (a propitious neutron balance oriented towards a maximum uranium burnup) and its special requirements (cooling, fissile material density and reprocessing) discussed. The three stages in the French program of fast reactor development are outlined with Rapsodie at Cadarache, Phenix at Marcoule, and Super Phenix at Creys-Malville. The more specific features of the program of research and development are emphasized: kinetics and the core, the fuel and the components [fr

  6. Nuclear reactor

    International Nuclear Information System (INIS)

    Schulze, I.; Gutscher, E.

    1980-01-01

    The core contains a critical mass of UN or U 2 N 3 in the form of a noncritical solution with melted Sn being kept below a N atmosphere. The lining of the reactor core consists of graphite. If fission progresses part of the melted metal solution is removed and cleaned from fission products. The reactor temperatures lie in the range of 300 to 2000 0 C. (Examples and tables). (RW) [de

  7. Reactor technology

    International Nuclear Information System (INIS)

    Erdoes, P.

    1977-01-01

    This is one of a series of articles discussing aspects of nuclear engineering ranging from a survey of various reactor types for static and mobile use to mention of atomic thermo-electric batteries of atomic thermo-electric batteries for cardiac pacemakers. Various statistics are presented on power generation in Europe and U.S.A. and economics are discussed in some detail. Molten salt reactors and research machines are also described. (G.M.E.)

  8. Reactor containment

    International Nuclear Information System (INIS)

    Kawabe, Ryuhei; Yamaki, Rika.

    1990-01-01

    A water vessel is disposed and the gas phase portion of the water vessel is connected to a reactor container by a pipeline having a valve disposed at the midway thereof. A pipe in communication with external air is extended upwardly from the liquid phase portion to a considerable height so as to resist against the back pressure by a waterhead in the pipeline. Accordingly, when the pressure in the container is reduced to a negative level, air passes through the pipeline and uprises through the liquid phase portion in the water vessel in the form of bubbles and then flows into the reactor container. When the pressure inside of the reactor goes higher, since the liquid surface in the water vessel is forced down, water is pushed up into the pipeline. Since the waterhead pressure of a column of water in the pipeline and the pressure of the reactor container are well-balanced, gases in the reactor container are not leaked to the outside. Further, in a case if a great positive pressure is formed in the reactor container, the inner pressure overcomes the waterhead of the column of water, so that the gases containing radioactive aerosol uprise in the pipeline. Since water and the gases flow being in contact with each other, this can provide the effect of removing aerosol. (T.M.)

  9. Fast reactors

    International Nuclear Information System (INIS)

    Vasile, A.

    2001-01-01

    Fast reactors have capacities to spare uranium natural resources by their breeding property and to propose solutions to the management of radioactive wastes by limiting the inventory of heavy nuclei. This article highlights the role that fast reactors could play for reducing the radiotoxicity of wastes. The conversion of 238 U into 239 Pu by neutron capture is more efficient in fast reactors than in light water reactors. In fast reactors multi-recycling of U + Pu leads to fissioning up to 95% of the initial fuel ( 238 U + 235 U). 2 strategies have been studied to burn actinides: - the multi-recycling of heavy nuclei is made inside the fuel element (homogeneous option); - the unique recycling is made in special irradiation targets placed inside the core or at its surroundings (heterogeneous option). Simulations have shown that, for the same amount of energy produced (400 TWhe), the mass of transuranium elements (Pu + Np + Am + Cm) sent to waste disposal is 60,9 Kg in the homogeneous option and 204.4 Kg in the heterogeneous option. Experimental programs are carried out in Phenix and BOR60 reactors in order to study the feasibility of such strategies. (A.C.)

  10. Analysis of efficiency of a solar dryer tunnel type of mango pulp; Analisis de la eficiencia de un secador solar tipo tunel para pulpa de mango

    Energy Technology Data Exchange (ETDEWEB)

    Chagoyan Serrano, Jose [Universidad Autonoma de Baja California Sur, La Paz, Baja California Sur (Mexico)

    2000-07-01

    A new method to assess the performance of a solar dryer is presented. It describes energy efficiency indicators to improve a commercial dryer design. First, a preliminary dryer design procedure is described step by step. Then, two different modes of a tunnel dryer are investigated: Batch and semi-continue operations. The results of the analysis show that, the thermal efficiency is not sufficient to rate de dryer performance. It is necessary to include the productivity of the drying process and the quality of the dried fruit. The drying process and productivity tend to go hand-in-hand but in opposite directions. That is to say, raising the thermal efficiency reduce the process productivity and conversely. The analysis also suggests that an agreement between the efficiency, productivity and the quality must be specified in the drier design. [Spanish] Se presenta un procedimiento nuevo para evaluar la operacion de un secador solar, con el cual se precisan indicadores de la eficiencia que pueden ser utiles para mejorar el diseno del equipo. Se empieza por describir los pasos de un procedimiento de diseno preliminar de un sistema de secado. Despues, se analizan cualitativamente dos secadores: uno que opera por lotes y el otro de modo semicontinuo. Los resultados del analisis muestran que, la eficiencia termica del equipo no es un criterio suficiente para evaluar su operacion; tambien se requiere tomar encuenta la productividad del proceso de secado y la calidad del producto final. Se concluye que la eficiencia termica y la productividad del proceso son conceptos encontrados. Es decir, la eficiencia termica del equipo no es un criterio suficiente para evaluar su operacion; tambien se requiere tomar en cuenta la productividad del proceso de secado y la calidad del producto final. Se concluye que la eficiencia termica y la productividad del proceso son conceptos encontrados. Es decir, la eficiencia termica solo se puede aumentar a costa de la productividad y viceversa

  11. ANALISIS LEMBAR KERJA SISWA DALAM MENINGKATKAN KOMUNIKASI MATEMATIS TULIS SISWA

    Directory of Open Access Journals (Sweden)

    Fimmatur Rizka Ardina

    2016-02-01

    Komunikasi merupakan suatu kemampuan yang penting untuk dimiliki setiap manusia. Komunikasi dalam artikel ini difokuskan pada komunikasi matematis tulis. Komunikasi matematis tulis ini akan berhubungan dengan lembar kerja siswa yang dipakai dalam proses pembelajaran. Tujuan penulisan artikel ini adalah untuk mendeskripsikan proses analisis LKS sebagai alat untuk meningkatkan komunikasi matematis tulis siswa. Jenis penelitian yang digunakan adalah kualitatif deskriptif. LKS akan dianalisis menggunakan standar indikator kemampuan komunikasi NCTM (2000 yang dimodifikasi sehingga terdapat empat indikator yaitu (1 siswa dapat menuliskan ide yang dimiliki dengan jelas dan tepat (2 siswa dapat menuliskan alasan untuk jawaban yang diberikan (3 siswa dapat memberikan tanggapan untuk ide atau jawaban siswa lain (4 siswa dapat menuliskan kembali ide orang lain menggunakan bahasanya sendiri. Berdasarkan hasil penelitian dapat disimpulkan bahwa LKS oleh Tim MGMP Kota Malang tidak dapat digunakan sebagai alternatif untuk meningkatkan kemmapuan komunikasi matematis tulis siswa.

  12. Analisis Implementasi Akuntansi Berbasis Akrual pada Inspektorat Jenderal Kementerian Keuangan

    Directory of Open Access Journals (Sweden)

    Eliada Herwiyanti

    2017-05-01

    Full Text Available Penelitian ini merupakan penelitian kualitatif terhadap penerapan Sistem Akuntansi Pemerintahan berbasis akrual di lingkungan Inspektorat Jenderal Kementerian Keuangan. Tujuan dari penelitian ini adalah untuk mengetahui bagaimana kesiapan dan penerapan SAP Berbasis Akrual di instansi tersebut. Data dalam penelitian ini dikumpulkan melalui observasi, studi kepustakaan, serta wawancara terhadap sepuluh orang informan yang terkait langsung dengan penerapan SAP berbasis akrual. Data yang telah dikumpulkan kemudian dianalisis dan diinterpretasikan secara naratif dengan menggunakan metode analisis data kualitatif yang direkomendasikan oleh Creswell (2012. Hasil penelitian ini menunjukkan bahwa secara umum, kesiapan Itjen Kemenkeu dalam menerapkan sistem akuntansi akrual sudah baik, mulai dari aspek komunikasi, sumber daya, komitmen organisasi, dan struktur birokrasi. Dengan kesiapan yang baik, penelitian ini juga menun­juk­kan bahwa penerapan sistem akuntansi akrual di Itjen Kemenkeu sudah dilakukan dengan sangat memuaskan, yang ditunjukkan dengan nilai sebesar 93,40%.

  13. ANALISIS PERANCANGAN BUSINESS INTELLIGENCE BERBASIS SAAS CLOUD COMPUTING

    Directory of Open Access Journals (Sweden)

    I Gede Adnyana

    2014-05-01

    Full Text Available Persaingan bisnis yang ketat, mendorong setiap perusahaan menyusun strategi bisnis agar dapat bertahan dari para pesaing. Penyusunan strategi bisnis mutlak memerlukan informasi yang tepat dan akurat, pengolahan hingga analisis data yang menghasilkan informasi yang tepat dan akurat menjadi proses yang sangat penting. Business Intelligence (BI menawarkan solusi bisnis untuk menganalisis data dan memungkinkan suatu perusahaan untuk mengambil keputusan untuk meningkatkan keuntungan dan kinerja bisnis. Namun, BI mahal untuk diimplementasikan, memerlukan biaya pemeliharaan yang tidak sedikit dan infrastruktur yang kuat. Hal ini mendorong perusahaan mengurangi biaya tetapi masih memiliki teknologi yang tepat untuk memungkinkan mereka untuk membuat keputusan, mengidentifikasi peluang dan proaktif mengidentifikasi risiko yang dapat mempengaruhi bisnis. Konsep Software as a Service (SaaS Cloud Computing dapat menjawab tantangan yang dihadapi BI. Sebelum merancang BI berbasis SaaS perlu diketahui parameter-parameter evaluasi hingga kelebihan dan kekurangannya.

  14. Analisis Kekuatan Struktur Pallet Menggunakan Metode Elemen Hingga

    Directory of Open Access Journals (Sweden)

    Tria Mariz Arief

    2015-07-01

    Full Text Available Pallet sebagai suatu alat bantu untuk mempermudah proses bongkar-muat logistik. Palletdigunakan hampir dalam berbagai lingkungan transportasi logistik. Pada bahasan berikutdikhususkan dalam lingkup transportasi di dalam pesawat udara khususnya pada pesawatangkut militer. Di lingkungan militer pallet digunakan untuk transport logistik baik secara normalmuat (loading dan bongkar (unloading maupun kondisi bongkar dengan diterjunkan daripesawat udara. Untuk pemenuhan penggunaan tersebut dilakukan perancangan ulang (reverseengineering struktur pallet yang dapat dimanufaktur secara lokal. Hipotesis awal menunjukkanbahwa berdasarkan kondisi pembebanan pada pallet dapat diperkirakan bahwa kondisitegangan dan regangan maksimum akan terjadi pada posisi sudut struktur pallet yang ditransferbebannya ke komponen plat besi penahan siku-siku dan baut. Material yang digunakan padastruktur pallet adalah Allumunium Alloy 7075-T6 dengan kekuatan tarik sebesar 503 MPa.Analisis dilakukan dengan menggunakan simulasi numerik dengan metoda elemen hingga(FEM. Proses simulasi numerik kekuatan struktur pallet difokuskan pada pembebanan statis(termasuk pengaruh factor G dalam interval beban statis 4 ton sampai 7 ton. Analisis dilakukanpada perubahan variabel tegangan dan regangan terhadap variasi beban yang diberikan untukmendapatkan tingkat keamanan struktur (margin safety. Pemodelan dilakukan denganidealisasi model ¼ bagian menggunakan elemen terstruktur dengan jenis elemen hexahedral(brick dengan jumlah 73803 elemen dan 360323 node. Hasil analisis menunjukkan teganganekuivalen maksimum struktur Pallet adalah 94 MPa yang terjadi di penguat sudut (anglebracket. Sedangkan pada struktur penguat lapis (sandwich structure berbahan thick blockyang mempunyai kekuatan sebesar 20 MPa adalah sebesar 0.84 MPa. Tingkat keamanansecara keseluruhan struktur dengan mempertimbangkan factor G hingga 2 adalah 5.3.Kata kunci: Analisis struktur, pallet, logistik, reverse engineering, FEM

  15. ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI INDEPENDENSI PENAMPILAN AKUNTAN PUBLIK

    Directory of Open Access Journals (Sweden)

    Ardiani Ika S.

    2012-03-01

    Full Text Available Tujuan dari penelitian ini adalah untuk menguji secara empiris faktor-faktor yang mempengaruhi independensi penampilan akuntan publik baik secara parsial dan simultan. Faktor-faktor tersebut adalah financial interests, hubungan bisnis dengan klien, pelayanan asuransi dan audit, hubungan antara klien atau yg diaudit dengan auditor, kompetisi antara Kantor Akuntan Publik (KAP, ukuran KAP dan audit fee. Populasi dalam penelitian ini adalah para auditor di akuntan publik di Semarang tahun 2009. Metode penyeleksian sampel yang digunakan adalah convenience sampling dan jumlah respondennya 35. Alat analisis yang digunakan adalah multiple regression analysis. Dimulai dengan analisis kuantitatif untuk mengetes validitas dan reabilitas. Kemudian dilanjutkan uji asumsi klasik termasuk normality, multicollinearity, and heteroscedastisity. Hasil menunjukkan bahwa 6 variabel yang sudah dikaji secara simultan dan partial tersebut mempunyai efek yang signifikan terhadap independensi penampilan akuntan publik dengan R square 0.749. The objective of this study is to test empirically the factors that influence the independence of public accountant appearance both partially and simultaneously. The factors cover financial interests, business relationships with clients, assurance services and audit services, the length of relationship between client or auditee and auditor, the competition between Public Accountan Offices (KAPs, the size of KAP, and audit fee. The population in this study was the auditors who worked in the public accountant’s office in Semarang in 2009. The sample selection method is a convenience sampling and the  number of  respondents are 35. The Analysis tools used is multiple regression analysis. It starts by applying quantitative analysis to test the validity and reliability. Then, it is continued by testing the classical assumptions which include normality, multicollinearity, and heteroscedastisity. The result shows that the six

  16. ENCAPAI SUMBER DAYA MANUSIA UNGGUL (ANALISIS KINERJA DAN KUALITAS PELAYANAN

    Directory of Open Access Journals (Sweden)

    Ketut Sudarma

    2012-03-01

    Full Text Available Penelitian ini  bertujuan untuk menganalisis pengaruh kemampuan individu, kepuasan kerja, komitmen organisasi terhadap kinerja dan kinerja terhadap kualitas pelayanan. Sampel penelitian berjumlah 76 orang. Teknik pengambilan sampel menggunakan proportional random sampling. Variabel penelitian terdiri dari kemampuan individu, kepuasan kerja, komitmen organisasi, dan kinerja serta kualitas pelayanan  Analisis data menggunakan regresi dua tahap. Hasil penelitian menunjukkan bahwa kemampuan individu, kepuasan kerja dan komitmen organisasi mempunyai pengaruh positif signifikan terhadap kinerja dan kinerja berpengaruh positif signifikan terhadap kualitas pelayanan. Ini berarti semakin meningkat kinerja, maka semakin meningkat juga kualitas pelayanan. Dari hasil analisis deskriptif persentase tampak secara rata-rata  semua variabel penelitian  menunjukkan kategori baik, namun pada aspek-aspek tertentu pada masing-masing variabel masih terdapat kekurangan. Hasil penelitian ini diharapkan dapat menjadi masukan bagi pimpinan dalam meningkatkan kinerja dan kualitas pelayanan. Upaya perbaikan dimulai dari peningkatan kemampuan melalui pendidikan dan latihan, monitoring pelaksanaan kerja secara rutin, menumbuhkan komitmen kerja dan perbaikan standar operasi prosedur.The aim of the study is toanalyze the influence of individual abilities, job satisfaction, organizational commitment to performanceand performance againstservice quality. This samplingmethod is using 76 samples by the proportionalrandom sampling techniques. Variables consisted of individual ability, job satisfaction, organizational commitment, and performance andservice qualitydata analysisusingtwo-stageregression. The results showedthat theability of individuals, job satisfaction and organizational commitment had asignificant positive effecton performance and the performance ofa significant positive effecton quality of service. It means the higher performance, the higher service

  17. Il difficile cammino dell’analisi musicale in Italia

    Directory of Open Access Journals (Sweden)

    Claudio Annibaldi

    2014-10-01

    Full Text Available Si immaginino gli atti d’un convegno sull’analisi musicale che abbia avuto luogo in un paese come la Francia, la Germania, l’ Inghilterra o gli Stati Uniti. Potrebbe mai accadere che essi vengano pubblicati sostituendo il discorso ufficiale d’apertura dei lavori con un testo tutto nuovo epperò simulante d’esser quello effettivamente pronunciato dall’autore? E potrebbe mai accadere - essendo costui un noto critico musicale e il direttore della collana editoriale comprendente gli atti in questione - che questo nuovo testo sia da lui dedicato a uno sfoggio della propria competenza analitica capace solo di esibire una visione dilettantesca della tecnica musicale tout court? Penso proprio di no. Eppure questo è accaduto in Italia non molti anni fa, quando le Edizioni Unicopli pubblicarono, nella collana dei "Quaderni di Musica/Realtà", gli atti di un convegno sull’analisi musicale tenuto nel 1989 a Reggio Emilia: il primo del genere negli annali della musicologia italiana. L’episodio rende bene l’idea dei pericoli incombenti sul cammino di quegli studiosi che, a far data dal convegno suddetto, si sono adoperati a che la pratica analitica acquisisse anche da noi la dignità scientifica di cui gode, appunto, in paesi come la Francia, la Germania, l’Inghilterra o gli Stati Uniti. Quei pericoli si chiamano ‘dilettantismo tecnico’, ‘arroganza intellettuale’, ‘ vezzo d’ imporre l’uno e l’altra grazie a un qualche tipo di potere personale’, ‘necessità di subire tale imposizione in cambio di qualche vantaggio pratico’.

  18. ANALISIS KENDALA POTENSIAL PENERAPAN TOTAL QUALITY MANAGEMENT HOTEL PLAZA SEMARANG

    Directory of Open Access Journals (Sweden)

    Hendrajaya -

    2010-03-01

    Full Text Available Penelitian ini bertujuan untuk menemukan faktor-faktor yang terbentuk dari kendala penerapan Total Quality Management (TQM, sebagai upaya untuk menganalisis masalah-masalah potensial dari penerapan TQM di Hotel Plaza, Semarang. Sampel dari penelitian ini sejumlah 65 karyawan Hotel Plaza, Semarang yang terdiri dari manajer dan staf. Teknik analisis menggunakan Faktor Analisis. Hasil penelitian menunjukkan, bahwa kendala potensial dari implementasi TQM dapat disimpulkan menjadi lima faktor, yaitu faktor inkonsistensi, visi-misi, transformasi budaya, manajerial dan manajemen kualitas. Penelitian ini memberikan rekomendasi bahwa peningkatan fungsi-fungsi korporat melalui optimalisasi kualitas sebagai strategi bisnis dan orientasi pada kepuasan konsumen dengan melibatkan seluruh anggota organisasi, akan menjadi dasar untuk memaksimalkan daya saing perusahaan dalam hal produk, layanan, SDM, lingkungan dan seluruh proses yang dapat mendukung upaya perbaikan produktivitas. This study aims to determine the constraint factors and to analyze the potential problems of TQM implementation of Plaza Semarang Hotel. The sample of 65 employees of TQM implementation of Plaza Semarang Hotel, consist of managers and staffs. Factor analysis is used to achieve the results of the potential constraint implementation of Total Quality Management which can be summarized into five factors, they are: the factor of inconsistencies, the factor of vision and mission, cultural transformation factors, managerial factors and the factors of quality management. In order to increase the corporate functions through the optimization of quality as a business strategy and to achieve customer satisfaction, this study suggests that all members of the organization should be involved by the company as on-going basis to maximize the competitiveness of the organization on products, services, human resources, environment and all processes that support productivity improvement.

  19. Perumusan Strategi Bersaing pada Perusahaan Ban dengan Metode Analisis Portofolio Produk (Studi Kasus: PT Multistrada Arah Sarana, Tbk

    Directory of Open Access Journals (Sweden)

    Nathanael August Zefanya

    2017-01-01

    Full Text Available Industri ban di Indonesia mengalami perkembangan pesat dalam kurun waktu 10 tahun terakhir. Namun, terjadinya krisis ekonomi global menjadi penyebab menurunnya pendapatan, salah satunya adalah PT MASA dengan produk utamanya yaitu ban mobil Achilles dan ban motor Corsa yang digunakan sebagai objek penelitian ini. Telah diilakukan analisis PESTEL dan Porter’s Five Forces, identifikasi faktor lingkungan internal dan eksternal dengan analisis SWOT serta merumuskan alternatif strategi bersaing untuk direkomendasikan kepada PT MASA. Perumusan strategi alternatif didapat dari hasil analisis Matriks BCG dan Matriks IE sebagai analisis portofolio untuk mendapatkan tema strategi alternatif dalam pembuatan Matriks SWOT. Strategi alternatif kemudian diperingkatkan dengan QSPM dan dilanjutkan pembuatan rencana aksi bagi PT MASA dalam waktu 5 tahun ke depan. Setelah dilakukan analisis industri, diketahui bahwa ancaman terbesar datang dari pesaing produsen ban. Dari hasil analisis portofolio, PT MASA berada di kuadran I karena memiliki koordinat IFE serta EFE 3,32 dan 3,26. Dari hasil analisis Matriks IE, PT MASA direkomendasikan untuk melakukan strategi grow and build. Hasil Matriks BCG menunjukkan bahwa Achilles berada di dogs, sementara Corsa berada di question marks. Terdapat 13 strategi alternatif hasil dari formulasi strategi dengan menggunakan matriks TOWS. Dari hasil analisis QSPM, terdapat 7 alternatif strategi terbaik dan rencana aksi..

  20. Generation IV reactors: reactor concepts

    International Nuclear Information System (INIS)

    Cardonnier, J.L.; Dumaz, P.; Antoni, O.; Arnoux, P.; Bergeron, A.; Renault, C.; Rimpault, G.; Delpech, M.; Garnier, J.C.; Anzieu, P.; Francois, G.; Lecomte, M.

    2003-01-01

    Liquid metal reactor concept looks promising because of its hard neutron spectrum. Sodium reactors benefit a large feedback experience in Japan and in France. Lead reactors have serious assets concerning safety but they require a great effort in technological research to overcome the corrosion issue and they lack a leader country to develop this innovative technology. In molten salt reactor concept, salt is both the nuclear fuel and the coolant fluid. The high exit temperature of the primary salt (700 Celsius degrees) allows a high energy efficiency (44%). Furthermore molten salts have interesting specificities concerning the transmutation of actinides: they are almost insensitive to irradiation damage, some salts can dissolve large quantities of actinides and they are compatible with most reprocessing processes based on pyro-chemistry. Supercritical water reactor concept is based on operating temperature and pressure conditions that infers water to be beyond its critical point. In this range water gets some useful characteristics: - boiling crisis is no more possible because liquid and vapour phase can not coexist, - a high heat transfer coefficient due to the low thermal conductivity of supercritical water, and - a high global energy efficiency due to the high temperature of water. Gas-cooled fast reactors combining hard neutron spectrum and closed fuel cycle open the way to a high valorization of natural uranium while minimizing ultimate radioactive wastes and proliferation risks. Very high temperature gas-cooled reactor concept is developed in the prospect of producing hydrogen from no-fossil fuels in large scale. This use implies a reactor producing helium over 1000 Celsius degrees. (A.C.)

  1. Research reactors - an overview

    International Nuclear Information System (INIS)

    West, C.D.

    1997-01-01

    A broad overview of different types of research and type reactors is provided in this paper. Reactor designs and operating conditions are briefly described for four reactors. The reactor types described include swimming pool reactors, the High Flux Isotope Reactor, the Mark I TRIGA reactor, and the Advanced Neutron Source reactor. Emphasis in the descriptions is placed on safety-related features of the reactors. 7 refs., 7 figs., 2 tabs

  2. Para Compreender Competiçâo e Cooperaçâo nas Organizaçoes. Reflexôes Preliminares

    Directory of Open Access Journals (Sweden)

    Zilá Mesquita

    1999-01-01

    Full Text Available A partir del desarrollo investigado por Piaget de la cooperación y competición en los distintos estadios de juegos, se buscó establecer paralelos en situaciones de cooperación y competición en organizaciones. Para ello fueron realizadas entrevistas con consultores y gerentes da RH y comparadas con la literatura utilizada. Las inferencias preliminares aquí presentadas subsidiarán futuros trabajos.

  3. Nuclear reactors

    Energy Technology Data Exchange (ETDEWEB)

    Prescott, R F; George, B V; Baglin, C J

    1978-05-10

    Reference is made to thermal insulation on the inner surfaces of containment vessels of fluid cooled nuclear reactors and particularly in situations where the thermal insulation must also serve a structural function and transmit substantial load forces to the surface which it covers. An arrangement is described that meets this requirement and also provides for core support means that favourably influences the flow of hot coolant from the lower end of the core into a plenum space in the hearth of the reactor. The arrangement comprises a course of thermally insulating bricks arranged as a mosaic covering a wall of the reactor and a course of thermally insulating tiles arranged as a mosaic covering the course of bricks. Full constructional details are given.

  4. Nuclear reactors

    International Nuclear Information System (INIS)

    Prescott, R.F.; George, B.V.; Baglin, C.J.

    1978-01-01

    Reference is made to thermal insulation on the inner surfaces of containment vessels of fluid cooled nuclear reactors and particularly in situations where the thermal insulation must also serve a structural function and transmit substantial load forces to the surface which it covers. An arrangement is described that meets this requirement and also provides for core support means that favourably influences the flow of hot coolant from the lower end of the core into a plenum space in the hearth of the reactor. The arrangement comprises a course of thermally insulating bricks arranged as a mosaic covering a wall of the reactor and a course of thermally insulating tiles arranged as a mosaic covering the course of bricks. Full constructional details are given. (UK)

  5. Bioconversion reactor

    Science.gov (United States)

    McCarty, Perry L.; Bachmann, Andre

    1992-01-01

    A bioconversion reactor for the anaerobic fermentation of organic material. The bioconversion reactor comprises a shell enclosing a predetermined volume, an inlet port through which a liquid stream containing organic materials enters the shell, and an outlet port through which the stream exits the shell. A series of vertical and spaced-apart baffles are positioned within the shell to force the stream to flow under and over them as it passes from the inlet to the outlet port. The baffles present a barrier to the microorganisms within the shell causing them to rise and fall within the reactor but to move horizontally at a very slow rate. Treatment detention times of one day or less are possible.

  6. PEMODELAN TERAS UNTUK ANALISIS PERHITUNGAN KONSTANTA MULTIPLIKASI REAKTOR HTR-PROTEUS

    Directory of Open Access Journals (Sweden)

    Zuhair Zuhair

    2015-04-01

    Full Text Available PTRKN sebagai salah satu unit kerja di BATAN dengan tugas pokok dan fungsi yang berkaitan erat dengan teknologi reaktor dan keselamatan nuklir, menaruh perhatian khusus pada konsep reaktor pebble bed. Dalam makalah ini pemodelan reaktor pebble bed HTR-PROTEUS dilakukan dengan program transport Monte Carlo MCNP5. Partikel bahan bakar berlapis TRISO dimodelkan secara detail dan eksak dimana distribusi acak partikel ini dalam bola bahan bakar didekati menggunakan array teratur kisi SC dengan fraksi packing 5,76% tanpa zona eksklusif. Model teras pebble bed didekati dengan memanfaatkan kisi teratur dari bola yang disusun sebagai kisi BCC berdasarkan sel berulang yang digenerasi dari sejumlah sel satuan. Hasil perhitungan MCNP5 memperlihatkan kesesuaian yang sangat baik dengan eksperimen, walaupun teras HTR-PROTEUS diprediksi lebih reaktif daripada pengukuran, khususnya di teras 4.2 dan 4.3. Pustaka ENDF/B-VI menunjukkan konsistensi dengan estimasi keff paling akurat dibandingkan pustaka ENDF/B-V, terutama ENDF/B-VI (66c. Deviasi estimasi keff yang dihitung dengan eksperimen dikaitkan sebagai konsekuensi dari komposisi reflektor grafit yang dispesifikasikan. Komparasi yang dibuat memperlihatkan bahwa MCNP5 menghasilkan keff teras HTR-PROTEUS lebih presisi daripada hasil dari MCNP4B dan MCNPBALL. Hasil ini menyimpulkan bahwa, sukses metodologi pemodelan ini menjustifikasi aplikasi MCNP5 untuk analisis reaktor pebble bed lainnya. Kata kunci: pemodelan teras HTR-PROTEUS, konstanta multiplikasi, MCNP5   PTRKN as a working unit in BATAN whose main duties and functions are related to reactor technology and nuclear safety, consern attention to pebble bed reactor concept. In this paper modeling of HTR-PROTEUS pebble bed reactor was done using Monte Carlo transport code MCNP5. The TRISO coated fuel particle is modeled in detailed and exact manner where random distributions of these particles in fuel pebble is approximated by using regular array of SC lattice

  7. Nuclear reactor

    International Nuclear Information System (INIS)

    Scholz, M.

    1976-01-01

    An improvement of the accessibility of that part of a nuclear reactor serving for biological shield is proposed. It is intended to provide within the biological shield, distributed around the circumference of the reactor pressure vessel, several shielding chambers filled with shielding material, which are isolated gastight from the outside by means of glass panes with a given bursting strength. It is advantageous that, on the one hand, inspection and maintenance will be possible without great effort and, on the other, a large relief cross section will be at desposal if required. (UWI) [de

  8. NEUTRONIC REACTOR

    Science.gov (United States)

    Wigner, E.P.; Weinberg, A.W.; Young, G.J.

    1958-04-15

    A nuclear reactor which uses uranium in the form of elongated tubes as fuel elements and liquid as a coolant is described. Elongated tubular uranium bodies are vertically disposed in an efficient neutron slowing agent, such as graphite, for example, to form a lattice structure which is disposed between upper and lower coolant tanks. Fluid coolant tubes extend through the uranium bodies and communicate with the upper and lower tanks and serve to convey the coolant through the uranium body. The reactor is also provided with means for circulating the cooling fluid through the coolant tanks and coolant tubes, suitable neutron and gnmma ray shields, and control means.

  9. The Analisis Sentimen Sosial Media Twitter Dengan Algoritma Machine Learning Menggunakan Software R

    Directory of Open Access Journals (Sweden)

    Jaka Aulia Pratama

    2017-10-01

    Full Text Available Media sosial adalah wadah untuk mengungkapkan opini terhadap suatu topik tertentu. Ketersediaan informasi dan opini dari para pengguna media sosial merupakan kumpulan dokumen data berupa teks yang amat sangat besar dan berguna untuk kepentingan penelitian maupun membuat suatu keputusan bagi pihak – pihak tertentu. Text Mining bisa didefinisikan sebagai proses penggalian informasi di mana pengguna berinteraksi dengan kumpulan dokumen dari waktu ke waktu dengan menggunakan suatu alat analisis. Analisis sentimen atau Opinion Mining adalah salah satu studi di bidang komputasi yang berhubungan dengan kasus publik mengenai opini, penilaian, sikap, dan emosi. Penelitian ini akan menggunakan metode Machine Learning pada analisis sentimen pengguna layanan jejaring sosial Twitter terhadap Donald Trump dan Barack Obama dalam 20000 tweets. Nilai akurasi metode Machine Learning yang diperoleh cukup tinggi yaitu 87.52% untuk Data Training dan 87.4% untuk Data Testing.

  10. Neutronic reactor

    International Nuclear Information System (INIS)

    Wende, C.W.J.

    1976-01-01

    The method of operating a water-cooled neutronic reactor having a graphite moderator is described which comprises flowing a gaseous mixture of carbon dioxide and helium, in which the helium comprises 40--60 volume percent of the mixture, in contact with the graphite moderator. 2 claims, 4 figures

  11. Neutronic reactor

    International Nuclear Information System (INIS)

    Wende, C.W.J.

    1976-01-01

    A safety rod for a nuclear reactor has an inner end portion having a gamma absorption coefficient and neutron capture cross section approximately equal to those of the adjacent shield, a central portion containing materials of high neutron capture cross section and an outer end portion having a gamma absorption coefficient at least equal to that of the adjacent shield

  12. Reactor facility

    International Nuclear Information System (INIS)

    Suzuki, Hiroaki; Murase, Michio; Yokomizo, Osamu.

    1997-01-01

    The present invention provides a BWR type reactor facility capable of suppressing the amount of steams generated by the mutual effect of a failed reactor core and coolants upon occurrence of an imaginal accident, and not requiring spacial countermeasures for enhancing the pressure resistance of the container vessel. Namely, a means for supplying cooling water at a temperature not lower by 30degC than the saturated temperature corresponding to the inner pressure of the containing vessel upon occurrence of an accident is disposed to a lower dry well below the pressure vessel. As a result, upon occurrence of such an accident that the reactor core should be melted and flown downward of the pressure vessel, when cooling water at a temperature not lower than the saturated temperature, for example, cooling water at 100degC or higher is supplied to the lower dry well, abrupt generation of steams by the mutual effect of the failed reactor core and cooling water is scarcely caused compared with a case of supplying cooling water at a temperature lower than the saturation temperature by 30degC or more. Accordingly, the amount of steams to be generated can be suppressed, and special countermeasure is no more necessary for enhancing the pressure resistance of the container vessel is no more necessary. (I.S.)

  13. Nuclear reactor

    International Nuclear Information System (INIS)

    Gilroy, J.E.

    1980-01-01

    An improved cover structure for liquid metal cooled fast breeder type reactors is described which it is claimed reduces the temperature differential across the intermediate grid plate of the core cover structure and thereby reduces its subjection to thermal stresses. (UK)

  14. Reactor licensing

    International Nuclear Information System (INIS)

    Harvie, J.D.

    2002-01-01

    This presentation discusses reactor licensing and includes the legislative basis for licensing, other relevant legislation , the purpose of the Nuclear Safety and Control Act, important regulations, regulatory document, policies, and standards. It also discusses the role of the CNSC, its mandate and safety philosophy

  15. Nuclear reactor

    International Nuclear Information System (INIS)

    Hattori, Sadao; Sekine, Katsuhisa.

    1987-01-01

    Purpose: To decrease the thickness of a reactor container and reduce the height and the height and plate thickness of a roof slab without using mechanical vibration stoppers. Constitution: Earthquake proofness is improved by filling fluids such as liquid metal between a reactor container and a secondary container and connecting the outer surface of the reactor container with the inner surface of the secondary container by means of bellows. That is, for the horizontal seismic vibrations, horizontal loads can be supported by the secondary container without providing mechanical vibration stoppers to the reactor container and the wall thickness can be reduced thereby enabling to simplify thermal insulation structure for the reduction of thermal stresses. Further, for the vertical seismic vibrations, verical loads can be transmitted to the secondary container thereby enabling to reduce the wall thickness in the same manner as for the horizontal load. By the effect of transferring the point of action of the container load applied to the roof slab to the outer circumferential portion, the intended purpose can be attained and, in addition, the radiation dose rate at the upper surface of the roof slab can be decreased. (Kamimura, M.)

  16. Reactor system

    International Nuclear Information System (INIS)

    Miyano, Hiroshi; Narabayashi, Naoshi.

    1990-01-01

    The represent invention concerns a reactor system with improved water injection means to a pressure vessel of a BWR type reactor. A steam pump is connected to a heat removing system pipeline, a high pressure water injection system pipeline and a low pressure water injection system pipeline for injecting water into the pressure vessel. A pump actuation pipeline is disposed being branched from a main steam pump or a steam relieaf pipeline system, through which steams are supplied to actuate the steam pump and supply cooling water into the pressure vessel thereby cooling the reactor core. The steam pump converts the heat energy into the kinetic energy and elevates the pressure of water to a level higher than the pressure of the steams supplied by way of a pressure-elevating diffuser. Cooling water can be supplied to the pressure vessel by the pressure elevation. This can surely inject cooling water into the pressure vessel upon loss of coolant accident or in a case if reactor scram is necessary, without using an additional power source. (I.N.)

  17. Reactor core

    International Nuclear Information System (INIS)

    Matsuura, Tetsuaki; Nomura, Teiji; Tokunaga, Kensuke; Okuda, Shin-ichi

    1990-01-01

    Fuel assemblies in the portions where the gradient of fast neutron fluxes between two opposing faces of a channel box is great are kept loaded at the outermost peripheral position of the reactor core also in the second operation cycle in the order to prevent interference between a control rod and the channel box due to bending deformation of the channel box. Further, the fuel assemblies in the second row from the outer most periphery in the first operation cycle are also kept loaded at the second row in the second operation cycle. Since the gradient of the fast neutrons in the reactor core is especially great at the outer circumference of the reactor core, the channel box at the outer circumference is bent such that the surface facing to the center of the reactor core is convexed and the channel box in the second row is also bent to the identical direction, the insertion of the control rod is not interfered. Further, if the positions for the fuels at the outermost periphery and the fuels in the second row are not altered in the second operation cycle, the gaps are not reduced to prevent the interference between the control rod and the channel box. (N.H.)

  18. New about research reactors

    International Nuclear Information System (INIS)

    Egorenkov, P.M.

    2001-01-01

    The multi-purpose research reactor MAPLE (Canada) and concept of new reactor MAPLE-CNF as will substitute the known Canadian research reactor NRU are described. New reactor will be used as contributor for investigations into materials, neutron beams and further developments for the CANDU type reactor. The Budapest research reactor (BRR) and its application after the last reconstruction are considered also [ru

  19. ANALISIS KELAYAKAN FINANSIAL PROYEK NARROWNECK PRESS AND BLOW UNTUK PROSES PRODUKSIBOTOL MINUMAN BERENERGI DI PT. ABC

    Directory of Open Access Journals (Sweden)

    Toni MT Munthe

    2015-08-01

    Full Text Available PT. ABC merupakan salah satu pabrik yang memproduksi botol kemasan kaca. Penelitian ini bertujuan untuk mengetahui layak atau tidaknya rencana investasi pada proyek Narrow Neck Press and Blow secara finansial di PT. ABC pada periode bulan April 2014 hingga bulan Juni 2014. Analisis kelayakan finansial proyek Narrow Neck Press and Blow, menggunakan metode analisis Net Present Value, Internal Rate of Return, Payback Period dan Sensitivity Analysis. Perbedaan antara nilai sekarang dari semua kas masuk dengan nilai sekarang dari semua kas keluar dari suatu proyek atau suatu investasi diperoleh dengan metode NPV, sedangkan untuk mencari tingkat bunga yang menyamakan nilai sekarang dari aliran kas bersih dan investasi diperoleh dengan metode IRR. Metode analisis yang dapat digunakan untuk mengetahui berapa lamakah waktu yang diperlukan untuk menutup dana yang dikeluarkan untuk suatu proyek dapat diperoleh dengan metode Payback Period. Setelah itu, dilakukan pengujian menggunakan sensitivitas analisis untuk mengetahui tingkat sensitivitas untuk tiap-tiap parameter terhadap persentase kenaikan dan penurunan. Dari hasil analisis data diperoleh nilai NPV sebesar Rp. 1.179.728.649.900,06, nilai IRR sebesar 56,36% dan periode pengembalian terletak pada 2 tahun 2 bulan 9 hari. Dengan menggunakan analisis sensitivitas dapat diketahui bahwa proyek ini sangat sensitif terhadap penurunan volume produksi. Berdasarkan hasil perhitungan, titik impas akan dicapai apabila volume produksi 213.403.267 unit per tahun atau 88,92% dari volume produksi awal. Nilai ini menunjukkan bahwa apabila volume produksi pada suatu periode mengalami penurunan lebih dari 11,08% dari volume produksi awal, maka investasi tersebut akan merugikan.

  20. ANALISIS PENGARUH VARIABILITAS TANAH PADA VARIABILITAS SPEKTRUM RESPON GEMPABUMI

    Directory of Open Access Journals (Sweden)

    I Nyoman Sukanta

    2010-11-01

    Full Text Available Salah satu komplek perkantoran yang terletak di Jalan Thamrin, Jakarta, dipilih sebagai lokasi penelitian. Hasil pemodelan data tanah, menghasilkan 3 lapisan tanah yang berbeda dengan kriteria jenis tanahnya cenderung lunak, dengan nilai N-SPT rata–rata = 11,23. Perhitungan percepatan puncak muka tanah (PGA dan nilai spektrum respon di permukaan tanah menggunakan metoda analisis linier equivalen dengan simulasi Monte Carlo. Program aplikasi SHAKE2000 merupakan alat bantu dalam simulasi, dengan memasukkan beberapa asumsi sebagai data masukan. Data masukan dinamik menggunakan sumber gempabumi Elcentro dan Mexico yang mempunyai kandungan frekuensi berbeda. Asumsi nilai percepatan puncak batuan dasar (PBA untuk kedua sumber gempabumi tersebut sebesar 0,18 g. Hasil analisis menunjukkan nilai spektrum respon dan percepatan puncak muka tanah sangat bervariasi. Gempabumi Elcentro menghasilkan nilai rata–rata PGA = 0,36 g dengan spektrum responnya = 1,0 g  pada Tc = 0,6 detik. Untuk gempabumi Mexico menghasilkan nilai rata–rata PGA = 0,30 g dengan spektrum responnya = 0,9 g pada Tc = 0,6 detik. Artinya, variabilitas jenis tanah sangat berpengaruh tehadap variabilitas spektrum respon di permukaan tanah.   One of the office complex located at Jalan Thamrin, Jakarta, was chosen as the location of the reseach. Results of data modeling soil, produces 3 different soil layers with soil type criteria tend to be soft, with a value of N-SPT  average = 11.23. Calculation of peak ground acceleration (PGA and the value of the response spectrum at ground surface using the method of equivalent linear analysis with Monte Carlo simulation. SHAKE2000 application software  is a tool in the simulation, by including some assumptions as input data. Dynamic input data using Elcentro and Mexican  earthquakes  which have different frequency contents. Assumed value of peak base acceleration (PBA for the two earthquakes was 0.18 g. The result of analysis was the value

  1. LA COMUNICAZIONE POLITICA SUI SOCIAL NETWORK: UN’ANALISI LINGUISTICA

    Directory of Open Access Journals (Sweden)

    Daniele Spoladore

    2014-07-01

    Full Text Available Questo lavoro si propone di analizzare le scelte linguistiche dei soggetti politici che utilizzano Facebook e Twitter per rivolgersi al sempre più frammentato panorama dei potenziali elettori. In particolare, analizza le tendenze linguistiche comuni che questi social network hanno fatto emergere nel rapporto tra politica, web e lettori. Cominciando dall’analisi della presenza di parlamentari e senatori su Facebook e Twitter, si cerca di riassumere le principali caratteristiche delle due piattaforme, per giungere ad una classificazione dei testi prodotti attraverso di esse; si analizza la scrittura di post e tweet, sottolineando la presenza di espedienti tipici del mezzo e valutando il loro effetto sui lettori, e si studiano le scelte sintattiche e morfosintattiche in relazione alla struttura e alle possibilità dei due social network. In ultima analisi si osservano le scelte lessicali dei soggetti politici, studiandone i campi semantici e la quantità di tecnicismi. Infine, si cerca di compiere una valutazione delle due differenti tipologie di trasmesso scritto rinvenute nei campioni, osservando come ognuna di esse abbia uno scopo ben preciso nell’economia della comunicazione politica sui social network. Political communication policy in social networks: a language analysis  Daniele Spoladore This paper aims to analyze the linguistic choices of politicians who use Facebook and Twitter to address the increasingly fragmented landscape of potential voters. In particular, it analyzes the common language trends that these social networks have revealed in the relationship between politics, the web and readers. Starting from the analysis of the presence of MPs and senators on Facebook and Twitter, we try to summarize the key features of the two platforms, in order to arrive at a classification of the texts produced using them.  We analyzed posts and tweets, emphasizing the  typical characteristics of these means and evaluating their effect on

  2. Analisis komoditas unggulan perikanan budidaya Kabupaten Pidie Jaya

    Directory of Open Access Journals (Sweden)

    Farok Afero

    2015-06-01

    Full Text Available Abstract. Snapper (Lates calcarifer, grouper (Epinephelus coioides, tiger shrimp (Penaeus monodon, vannamei shrimp (Litopenaeus vannamei and tilapia (Oreochromis niloticus are leading commodity worthly cultivated in Pidie Jaya. Bandar Baru and Tringgadeng an appropriate areas for black tiger shrimp while Jangka Buya and Ulim approriate areas for vannamei cultivation. AHP analysis showed black tiger shrimp is top priority based on the economic value while vannamei shrimp is top priority based on enterprise sustainability. Financial analysis of snapper, grouper, black tiger shrimp, vannamei shrimp and tilapia farming generated positive cash flow and NPV, IRR > 100%, the ratio of benefit to cost of production > 1,30 and payback period of investment costs  < 1 year, thus demonstrating the feasibility of cultivation of these leading commodities. Vannamei shrimp cultivation showed positive prospect as long the market offers premium price. Grouper and snapper had a positive outlook because high demand of high-quality fish in the international market. Keywords: Leading commodity; financial analysis; aquaculture; Pidie Jaya Abstrak. Komoditas kakap (Lates calcarifer, kerapu (Epinephelus coioides,udang windu (Penaeus monodon, udang vannamei (Litopenaeus vannamei dan nila (Oreochromis niloticus adalah komoditas unggulan yang layak dibudidaya di Kabupaten Pidie Jaya. Bandar Baru dan Tringgadeng merupakan kawasan yang layak untuk pengembangan komoditas udang windu sedangkan Jangka Buya dan Ulim layak untuk pengembangan komoditas udang vannamei. Analisis AHP menunjukkan komoditas udang windu menjadi prioritas utama untuk dikembangkan berdasarkan nilai ekonomi sedangkan udang vannamei menjadi prioritas utama berdasarkan keberlanjutan usaha. Analisis indikator keuangan budidaya kakap, kerapu, udang windu, vannamei dan nila menunjukkan usaha budidaya komoditas unggulan menghasilkan arus kas kumulatif dan NPV positif, nilai  IRR diatas 100%, rasio keuntungan

  3. ANALISIS PERILAKU SEKSUAL BERISIKO PADA REMAJA TERINFEKSI HIV DAN AIDS

    Directory of Open Access Journals (Sweden)

    Afritayeni Afritayeni

    2018-03-01

    penelitian eksplanatory research dengan pendekatan kuantitatif.Penelitian ini dilaksanakan dari bulan April-Oktober 2017.Jumlah sampel dalam penelitian ini adalah sebanyak 95 orang remaja yang terinfeksi HIV/ AIDS di Yayasan Sebaya Lancang Kuning dengan teknik pengambilan sampel accidental sampling. Pengumpulan data dilakukan dengan menggunakan data primer dan sekunder. Analisis data menggunakan analisis multivariat dengan uji regresi logistik berganda. Berdasarkan hasil penelitian dapat disimpulkan bahwa faktor yang paling dominan mempengaruhi perilaku seksual remaja adalah dorongan seksual.

  4. ANALISIS KEMAMPUAN KEUANGAN DAERAH PEMERINTAH PROPINSI NUSA TENGGARA BARAT

    Directory of Open Access Journals (Sweden)

    Hery Susanto

    2015-04-01

    Full Text Available This research aims to analyze the regional finance capability in West Nusa Tenggara province. This research uses secondary data of primary source. The data are obtained from the government of West Nusa Tenggara Province in the form of data that has been processed and published and become a legitimate document such as calculation data of APBD in Budgetary Year of 2003-2007. The instruments are used in collecting the data is the analysis of the regional finance capability through Calculation and Work Analysis of PAD, which is the measurement of share and growth, thus classified the result with mapping the financial region capability based on quadrant method. This research draws some conclusions namely: (1 generally, contribution of PAD (share to the total region income of NTB Province TA 2003- 2007 was low, in spite of the growth of PAD was high; (2 based on the measurement of Index Financial Capability (IKK, NTB Province was in the scale index of 0,541. Furthermore, the classification based on the criteria level of regional finance capability, the regional finance capability in NTB Province in 2003 -2007 was a province with high financial capability. There are some suggestions that could be offered to the Government of NTB Province; first, improving PAD share in NTB Province through the excavation of PAD potential sources. Second, concerning with the region cost efficiency, considering that the proportion of PAD achievement was fairly small comparing to the allocation of Region Cost. Penelitian ini bertujuan untuk menganalisis kemampuan keuangan daerah di Propinsi Nusa Tenggara Barat . Penelitian ini menggunakan data sekunder dari sumber utama. Data diperoleh dari pemerintah Propinsi Nusa Tenggara dalam bentuk data yang telah diolah dan dipublikasikan dan menjadi dokumen yang sah seperti data perhitungan APBD Tahun Anggaran 2003-2007. Instrumen yang digunakan dalam pengumpulan data adalah analisis kemampuan keuangan daerah melalui Perhitungan dan

  5. Analisis Reduksi Intensitas Cahaya Pada Smartphones’ Screen Protector Dan Dampaknya Pada Mata

    Directory of Open Access Journals (Sweden)

    Bhekti Kumorowati

    2017-04-01

    Full Text Available Analisis reduksi intensitas cahaya yang melewati screen protector dan identifikasi kemampuan screen protector sebagai pelindung mata dilakukan dengan mengukur reduksi intensitas cahaya menggunakan luxmeter, kemudian menetapkan fokus bahasan yang mencakup kemampuan cahaya menembus screen protector dan analisis fisis screen protector sebagai pelindung mata. Peran sebagai pelindung mata dikaji melalui pendekatan peristiwa polarisasi yaitu proses terserapnya sebagian arah getar cahaya. Dihasilkan sebagian arah getar cahaya layar smartphone sebelum masuk ke mata akan terserap oleh screen protector sehingga dapat memperlambat terjadinya degenerasi makula. Rekomendasi pemilihan screen protector bergantung pada besarnya koefisien atenuasi (koefisien penyerapan yang dimiliki masing-masing screen protector. Koefisien atenuasi terbesar dimiliki oleh screen protector jenis anti spy.

  6. Analisis dan Desain BI-Dashboard Monitoring Realisasi Daftar Isian Pelaksanaan Anggaran (DIPA pada Kantor Pelayanan Perbendaharaan Negara (KPPN

    Directory of Open Access Journals (Sweden)

    Ernestina Rahmanasari

    2013-09-01

    Full Text Available Transaksi keuangan badan pemerintahan tingkat daerah dipertanggungjawabkan kepada Kementrian Keuangan melalui Kantor Pelayanan Perbendaharaan Negara (KPPNsetiap bulan dalam bentuk Laporan Keuangan Pemerintah Pusat (LKPP. Laporan Keuangan, didukung dengan teknologi Business Intelligence(BI dashboarddapat dimanfaatkan sebagai data-driven decision support system yang mendorong performa kinerja. Analisis dan desainterhadap pembuatan BI dashboard menunjukkanbagaimana Laporan Keuangan dapat digunakan untuk monitoring realisasi penyerapan dana DIPA dan kinerja instansi secara tepat waktu dan interaktif.Analisis terdiri dari analisis Indikator Kinerja Utama (IKU dan analisis Laporan Keuangan. IKUpada analisis dan desain ini mencakup ketercapaian estimasi dengan penerimaan, ketercapaian pagu dengan belanja, ketepatan waktu pengiriman rekonsiliasi oleh instansi, validasi, akurasi, dan ketepatan data. Desain terdiri dari katalog dashboard, alur analisis, sumber data, desain User-Interface, dan desain objek dashboard. Sedangkan dashboard yang dirancang menggunakan aplikasi Vera sebagai Enterprise System, mengakses basis data MySQL, dan menampilkan data dengan teknologi data-driven business-intelligence Qlikview. Desain aplikasi yang telah dibuat akan menampilkan 4 (empat Tab yaitu: Dashboard utama, Analisis, Monitoring, dan Laporan

  7. Reactor core of nuclear reactor

    International Nuclear Information System (INIS)

    Sasagawa, Masaru; Masuda, Hiroyuki; Mogi, Toshihiko; Kanazawa, Nobuhiro.

    1994-01-01

    In a reactor core, a fuel inventory at an outer peripheral region is made smaller than that at a central region. Fuel assemblies comprising a small number of large-diameter fuel rods are used at the central region and fuel assemblies comprising a great number of smalldiameter fuel rods are used at the outer peripheral region. Since a burning degradation rate of the fuels at the outer peripheral region can be increased, the burning degradation rate at the infinite multiplication factor of fuels at the outer region can substantially be made identical with that of the fuels in the inner region. As a result, the power distribution in the direction of the reactor core can be flattened throughout the entire period of the burning cycle. Further, it is also possible to make the degradation rate of fuels at the outer region substantially identical with that of fuels at the inner side. A power peak formed at the outer circumferential portion of the reactor core of advanced burning can be lowered to improve the fuel integrity, and also improve the reactor safety and operation efficiency. (N.H.)

  8. Perbandingan Penilaian Saham Dengan Metode Analisis Fundamental Dan Analisis Tehknical, Penggorengan Saham, Serta Keputusan Penilaian Saham Jika Hasil Berlawanan Arah Untuk Kedua Metode Analisis Pada Saham Bakrie Group Untuk Periode 2005- 2009

    OpenAIRE

    Harwaningrum, Miranti

    2016-01-01

    Beberapa tahun belakangan ini, dunia investasi mengalami peningkatan. Hal ini dapat terlihat dari data rata-rata perdagangan saham yang dimiliki oleh Bapepam. Salah satu jenis instrumen investasi yang sering diminati oleh investor adalah saham. Apabila dibandingkan dengan obligasi, saham memiliki expected return yang lebih tinggi. Namun, saham memiliki resiko yang lebih tinggi bila dibandingkan dengan obligasi. Untuk melakukan penilaian saham ada dua analisis yang dapat dilakukan, yaitu funda...

  9. ANALISIS ATRIBUT-ATRIBUT YANG MEMPENGARUHI TINGKAT KEPUASAN PELANGGAN TELEPON RUMAH (FIXED WIRELINE MENGGUNAKAN METODE ANALISIS DISKRIMINAN (STUDI KASUS DI PT. TELKOM KANDATEL SEMARANG

    Directory of Open Access Journals (Sweden)

    Diana Puspita Sari

    2012-02-01

    Full Text Available PT Telkom memiliki misi untuk memberikan layanan One Stop Infocom dengan kualitas prima dan harga kompetitif. Kenyataannya, PT. Telkom Kandatel Semarang mengalami penurunan pendapatan. Semakin berkembangnya layanan jasa fixed wireless yang lebih mudah dan murah, menyebabkan penurunan pemakaian jasa fixed wireline. Dengan konsumen melakukan pembelian pertama pada suatu produk tertentu dengan harga terjangkau, kualitas terjamin, maka konsumen akan kembali membeli produk tersebut, dan dampaknya dari fenomena ini adalah kepuasan pelanggan (customer satisfaction terhadap produk tertentu karena telah memberikan kepuasan dan terjaminnya kualitas, walaupun banyak pesaing lain.  Oleh sebab itu, penelitian ini membahas dan melakukan analisis kepuasan pelanggan fixed wireline PT. Telkom Kandatel Semarang, menggunakan variabel kepuasan pelanggan untuk dikelompokkan menjadi tiga tingkatan yaitu pelanggan yang sangat puas, puas, dan tidak puas dengan menggunakan analisis klaster, kemudian dilakukan analisis variabel 4P Customer Relationship Management (CRM menggunakan analisis diskriminan, sehingga diketahui atribut yang mempengaruhi tingkat kepuasan pelanggan agar PT. Telkom Kandatel Semarang dapat terus mempertahankan dan meningkatkan kepuasan pelanggan dengan berusaha memenuhi kebutuhan dan keinginan pelanggan dengan maksud kepuasan pelanggan tidak menurun agar dapat meningkatkan intensitas pemakaian fixed wireline. Kata kunci : analisis klaster, analisis diskriminan, kepuasan pelanggan, fixed wireline      PT Telkom has a mission to provide a One Stop Infocom services with excellent quality and competitive price. In fact, PT. Telkom Semarang Kandatel income decreased. The growing fixed wireless service is easier and cheaper, causes a decrease in the use of fixed wireline services.With the first consumer purchase a given product at an affordable price, guaranteed quality, then consumers will buy the product again, and the impact of this phenomenon is

  10. Nuclear reactor

    International Nuclear Information System (INIS)

    Gibbons, J.F.; McLaughlin, D.J.

    1978-01-01

    In the pressure vessel of the water-cooled nuclear reactor there is provided an internal flange on which the one- or two-part core barrel is hanging by means of an external flange. A cylinder is extending from the reactor vessel closure downwards to a seat on the core cupport structure and serves as compression element for the transmission of the clamping load from the closure head to the core barrel (upper guide structure). With the core barrel, subject to tensile stress, between the vessel internal flange and its seat on one hand and the compression of the cylinder resp. hold-down element between the closure head and the seat on the other a very strong, elastic sprung structure is obtained. (DG) [de

  11. Nuclear reactor

    International Nuclear Information System (INIS)

    Sasaki, Tomozo.

    1987-01-01

    Purpose: To improve the nuclear reactor availability by enabling to continuously exchange fuels in the natural-slightly enriched uranium region during operation. Constitution: A control rod is withdrawn to the midway of a highly enriched uranium region by means of control rod drives and the highly enriched uranium region is burnt to maintain the nuclear reactor always at a critical state. At the same time, fresh uranium-slightly enriched uranium is continuously supplied gravitationally from a fresh fuel reservoir through fuel reservoir to each of fuel pipes in the natural-slightly enriched uranium region. Then, spent fuels reduced with the reactivity by the burn up are successively taken out from the bottom of each of the fuel pipes through an exit duct and a solenoid valve to the inside of a spent fuel reservoir and the burn up in the natural-slightly enriched uranium region is conducted continuously. (Kawakami, Y.)

  12. Nuclear reactor

    International Nuclear Information System (INIS)

    Sakurai, Mikio; Yamauchi, Koki.

    1983-01-01

    Purpose: To improve the channel stability and the reactor core stability in a spontaneous circulation state of coolants. Constitution: A reactor core stabilizing device comprising a differential pressure automatic ON-OFF valve is disposed between each of a plurality of jet pumps arranged on a pump deck. The stabilizing device comprises a piston exerted with a pressure on the lower side of the pump deck by way of a pipeway and a valve for flowing coolants through the bypass opening disposed to the pump deck by the opening and closure of the valve ON-OFF. In a case where the jet pumps are stopped, since the differential pressure between the upper and the lower sides of the pump deck is removed, the valve lowers gravitationally into an opened state, whereby the coolants flow through the bypass opening to increase the spontaneous circulation amount thereby improve the stability. (Yoshino, Y.)

  13. Nuclear reactor

    International Nuclear Information System (INIS)

    Aleite, W.; Bock, H.W.; Struensee, S.

    1976-01-01

    The invention concerns the use of burnable poisons in a nuclear reactor, especially in PWRs, in order to improve the controllability of the reactor. An unsymmetrical arrangement in the lattice is provided, if necessary also by insertion of special rods for these additions. It is proposed to arrange the burnable poisons in fuel elements taken over from a previous burn-up cycle and to distribute them, going out from the side facing the control rods, over not more than 20% of the lenth of the fuel elements. It seems sufficient, for the burnable poisons to bind an initial reactivity of only 0.1% and to become ineffective after normal operation of 3 to 4 months. (ORU) [de

  14. Reactor container

    International Nuclear Information System (INIS)

    Ichiki, Tadaharu; Saba, Kazuhisa.

    1979-01-01

    Purpose: To improve the earthquake resistance as well as reduce the size of a container for a nuclear reactor with no adverse effects on the decrease of impact shock to the container and shortening of construction step. Constitution: Reinforcing profile steel materials are welded longitudinally and transversely to the inner surface of a container, and inner steel plates are secured to the above profile steel materials while keeping a gap between the materials and the container. Reactor shielding wall planted to the base concrete of the container is mounted to the pressure vessel, and main steam pipeways secured by the transverse beams and led to the outside of container is connected. This can improve the rigidity earthquake strength and the safetiness against the increase in the inside pressure upon failures of the container. (Yoshino, Y.)

  15. Reactor container

    International Nuclear Information System (INIS)

    Oyamada, Osamu; Furukawa, Hideyasu; Uozumi, Hiroto.

    1979-01-01

    Purpose: To lower the position of an intermediate slab within a reactor container and fitting a heat insulating material to the inner wall of said intermediate slab, whereby a space for a control rod exchanging device and thermal stresses of the inner peripheral wall are lowered. Constitution: In the pedestal at the lower part of a reactor pressure vessel there is formed an intermediate slab at a position lower than diaphragm floor slab of the outer periphery of the pedestal thereby to secure a space for providing automatic exchanging device of a control rod driving device. Futhermore, a heat insulating material is fitted to the inner peripheral wall at the upper side of the intermediate slab part, and the temperature gradient in the wall thickness direction at the time of a piping rupture trouble is made gentle, and thermal stresses at the inner peripheral wall are lowered. (Sekiya, K.)

  16. Analisis Vegetasi di Hutan Mbeji Daerah Wonosalam Jombang

    Directory of Open Access Journals (Sweden)

    Anita Munawwaroh

    2016-03-01

    Full Text Available Analisis vegetasi terhadap hutan perlu dilakukan untuk mengetahui keanekaragaman hayati yang terdapat di hutan tersebut sehingga mempermudah didalam melakukan pemeliharaan dan pemberdayaan hutan.Tujuan dari penelitian ini adalah untuk mengetahui keanekaragaman hayati dan struktur vegetasi (frekuensi, kerapatan, dominansi, dan Indeks Nilai Penting di hutan mbeji, Wonossalam, Jombang. Pada penelitian ini digunakan metode point centered quarter. Pennelitian dilakukan pada bulan Mei 2015. Hasil penelitian menujukkan padaHutan Mbeji terdapat 11 jenis pohon yang teridentifikasi dan 15 spesies tumbuhan, dimana ada 10 spesies yang telah teridentifikasiNilai penting  tumbuh-tumbuhan di Hutan Mbeji di daerah Wonosalam Jombang  pada tingkat pohon paling tinggi adalah pohon randu (Ceiba petandra  sebesar 57,42 % sedangkan nilai INP paling rendah dari jenis pohon andong (Rhadamnia cinerea yaitu sebesar 6,06 %. Pada sapling nilai penting yang paling tinggi adalah talas (Colocasia esculenta yaitu sebesar 49,23 %. Sedangkan, nilai INP paling rendah dari jenis nanas (Ananas comosus, nangka (Artocarpus heterophyllus, tapak liman (Elephantopus scaber, semak A, semak B, semak C, semak E, dan semak F yaitu sebesar 6,35 %. Tingginya nilai INP menunjukkan bahwa jenis-jenis tersebut dapat menyesuaikan diri dengan lingkungan sekitarnya yang lebih baik dibanding jenis lainnya.

  17. ANALISIS MODEL PENERIMAAN PENGGUNA SISTEM PELAPORAN PAJAK ONLINE

    Directory of Open Access Journals (Sweden)

    Muhammad Malik Hakim

    2016-04-01

    Full Text Available Direktorat Jenderal Pajak saat ini telah menerapkan e-SPT dan e-Filing sebagai sarana digitalisasi dan otomasi pelaporan pajak. Untuk meningkatkan transformasi bisnis proses dalam sistem pelayanan perpajakan dari sistem manual ke digital, diperlukan kesiapan dan penerimaan pengguna yang cukup memadai. Studi dan analisis perlu dilakukan untuk mengetahui sejauh mana tingkat penerimaan pengguna dalam menggunakan sistem e-SPT dan e- Filing. Studi dilakukan secara kuantitatif menggunakan model UTAUT yang telah dimodifikasi untuk menganalisis model penerimaan pengguna yang merupakan Wajib Pajak Orang Pribadi yang telah menggunakan e-SPT dan e- Filing. Jumlah responden dalam penelitian ini sejumlah 235 responden yang disebarkan dengan cara snow ball sampling. Hasil penelitian menunjukkan perbedaan model penerimaan e-SPT dan e-Filing dari jenis kelamin dan kelompok umur. Pengaruh harapan kinerja (PE dan pengaruh sosial (SI terhadap niat perilaku (BI, serta pengaruh niat perilaku (BI pada penggunaan aktual (AU pada pria lebih kuat dibandingkan pada wanita. Sebaliknya, pengaruh harapan usaha (EE terhadap niat perilaku (BI dan fasilitas pendukung / penunjang (FC terhadap penggunaan aktual (AU pada wanita dijumpai memberikan pengaruh yang lebih kuat. Selain itu, di dalam kelompok umur, pengaruh terhadap semua variabel yang diteliti ternyata lebih kuat pada kelompok umur 25 35 tahun. Kata kunci: model penerimaan pengguna, UTAUT, pelaporan pajak, e-SPT, e-filing.

  18. ANALISIS TINGKAT PENDAPATAN PEDAGANG CANANG DI PASAR BADUNG

    Directory of Open Access Journals (Sweden)

    Surya Dewi Rustariyuni

    2015-12-01

    Full Text Available This studyanalyzes thecharacteristic of “canang”sellers, their economicactivities, their revenues, the factors which influencethem to chooseBadung Market for selling their products and theircontributions in their household economy. As a matter of fact,all of Hindu ismpeoplein Bali use canang everyday for conductingall ceremonies, but only few people whomake canang. It has occured foryears. The method used for analizing the data isdescriptive analysis. The result shows thatthe canang sellersare mostlyfrom Bali. They are dominated by married women atthe age of 15 up to 35 years old. Then, theireducational backgroundaresenior high schools. They start selling early in the morning and stop their activities in the evening.Finally, usually the sellers get much money when there is a big ceremony.Penelitian ini menganalisis karakteristik penjual "canang", kegiatan ekonominya, pendapatannya, faktor-faktor yang mempengaruhi penjual canang untuk memilih Pasar Badung sebagai tempat untuk menjual canangnya dan kontribusi penjual canang dalam perekonomian rumah tangga. Sebenarnya, semua orang Hindu di Bali menggunakan canang setiap hari untuk melakukan semua upacara, tetapi hanya sedikit orang yang membuat canang. Ini telah terjadi selama bertahun-tahun. Metode yang digunakan untuk menganalisis data disini adalah analisis deskriptif. Hasil penelitian menunjukkan bahwa para penjual canang sebagian besar dari Bali. Mereka didominasi oleh perempuan yang sudah menikah danusianya antara 15 hingga 35 tahun. Kemudian, latar belakang pendidikan mereka adalah sekolah menengah atas. Mereka mulai menjual canang di pagi hari dan selesai di malam hari. Biasanya para penjual mendapatkan uang banyak ketika ada upacara besar.

  19. Analisis Cost-Volume-Profit Kaitannya dengan Perencanaan Laba

    Directory of Open Access Journals (Sweden)

    Rian Andriani

    2018-01-01

    Full Text Available Tujuan penelitian  ini adalah untuk menganalisis cost, volume, profit Break Event Point dan Margin Of Safety L.A English Course Baleendah Bandung pada kuartal I – IV. Metode penelitian yang digunakan adalah metode penelitian kuntitatif deskriptif. Teknik pengumpulan data menggunakan studi pustaka, observasi, wawancara, dan dokumentasi yang memiliki hubungan dengan pokok permasalahan. Teknik analisis data yang digunakan metode regresi kuadrat terkecil, break event point dan margin of safety.  Hasil menunjukan, biaya tertinggi terdapat pada kuartal I, volume penjualan  tertinggi terdapat pada kuartal I, laba tertinggi terdapat pada kuartal I, Break Event Point tertinggi terdapat pada kuartal I. Sedangkan Margin of safety (% tertinggi pada kuartal IV yaitu 91.9%. Masalah yang timbul dalam  perencanaan  laba yaitu pertama  pendapatan L.A English Course  naik turun  dalam satu  tahunnya, kedua  kurangnya promosi untuk beberapa program kecuali program regular. Upaya dalam mengatasi masalah yang timbul di L.A English Course yaitu pertama memberikan gratis biaya daftar, dan memberi voucher untuk siswa L.A yang memasukan siswa baru., kedua membagikan brosur, dan menawarkan program L.A. dengan melakukan follow up semua nomor telepon tamu yang pernah berkunjung.

  20. ANALISIS PENGARUH PERUBAHAN EARNINGS DAN RISIKO PASAR TERHADAP STRUKTUR MODAL

    Directory of Open Access Journals (Sweden)

    Endi Sarwoko

    2006-05-01

    Full Text Available Penelitian ini bertujuan untuk menguji perbedaan rata-rata struktur modal antar industri, menguji pengaruh perubahan earnings perusahaan terhadap struktur modal, dan menguji pengaruh risiko pasar dengan struktur modal perusahaan. Struktur modal dalam penelitian ini diproksikan dengan debt to equity ratio dan debt to total assets. Data diperoleh dari Pojok Bursa Efek Jakarta (BEJ Universitas Brawijaya, sampel sebanyak 40 perusahaan yang diambil secara Purposive dengan kriteria perusahaan-perusahaan tersebut aktif mencatatkan laporan keuangannya di BEJ dan aktif melakukan perdagangan saham selama 6 tahun terakhir. Hasil analisis menunjukkan bahwa terdapat pengaruh terbalik antara perubahan earnings perusahaan terhadap D/E tetapi perubahan earnings ternyata tidak berpengaruh signifikan terhadap D/A. Risiko pasar tidak berpengaruh signifikan terhadap debt to equity, hasil ini menunjukkan bahwa ketika akan melakukan pembelian saham investor tidak mempertimbangkan risiko pasar. Sedangkan berdasarkan pengaruh terhadap D/A diperoleh hasil risiko pasar berpengaruh signifikan terhadap debt to total assets,  manajemen perusahaan sangat memperhatikan dampak risiko pasar dalam menentukan kebijakan struktur modal perusahaan, karena dalam memberikan pinjaman kreditur biasanya sangat mempertimbangkan aset yang dimiliki perusahaan didanai dari mana, hutang atau modal sendiri.

  1. Analisis ergonomi postur kerja operator pada proses pembuatan batako

    Directory of Open Access Journals (Sweden)

    Regina Anggraini

    2017-03-01

    Full Text Available Abstrak: Proses pembuatan batako merupakan salah satu pekerjaan yang membutuhkan penanganan material secara manual,sehingga tenaga fisik pekerja diperlukan meskipun mesin bantu cetak sudah tersedia. Berdasarkan pengamatan dilapangandiketahui bahwa seluruh aktivitas pembuatan batako banyak membutuhkan tenaga fisik. Pekerjaan membuat batako dapatdibagi menjadi beberapa elemen kerja dan setiap elemen kerja memberikan postur kerja yang bervariasi. Hasil analisis posturkerja dengan menggunakan REBA menunjukkan pekerja pada proses pemindahan batako basah memiliki nilai 11 dengan levelrisiko sangat tinggi. Perbaikan dilakukan dengan menambahkan kursi pekerja dan berhasil menurunkan skor REBA menjadi 5.Kata Kunci: Postur kerja, REBA Abstract: Brick-making process is one of those jobs that require manual materials handling, so that the physical exertion of workersneeded though a production machine is already available. Based on observations in the field note that the entire activity ofbrick-making requires a lot of physical exertion. Brick-making can be divided into several working elements and each element ofthe work provides a varied work posture. The results of the analysis work posture using REBA showed workers in the processof moving the wet concrete blocks have a value of 11 with a very high risk level. Improvement of working conditions by adding aseat for workers reduce the REBA score to 5 .Keywords: Work Posture , REBA

  2. ANALISIS PENGARUH TINGKAT KESEHATAN BANK TERHADAP RETURN ON ASSET

    Directory of Open Access Journals (Sweden)

    Andy Setiawan

    2017-10-01

    Full Text Available Penelitian  ini  dilakukan  untuk  menganalisis pengaruh  tingkat kesehatan bank terhadap return on asset (ROA berdasarkan metode risk based bank rating (RBBR. Variabel independen yang diteliti adalah Non  Performing  Loan  (NPL, Loan to Deposit Ratio (LDR, Net Interest Margin (NIM, Capital Adequacy Ratio (CAR,  BOPO   (Biaya   Operasional/Pendapatan Operasional, Good Corporate Governance (GCG dan Posisi  Devisa  Netto  (PDN terhadap variabel dependen Return On Asset (ROA. Sampel yang digunakan  adalah  seluruh bank BUKU 4 di Indonesia selama periode 2007-2014. Teknik analisis data yang  digunakan  adalah  regresi  linier  berganda. Hasil penelitian ini menunjukkan bahwa tingkat kesehatan bank dengan metode RBBR berpengaruh signifikan secara bersama terhadap ROA. Secara parsial LDR, NIM, BOPO, dan PDN berpengaruh signifikan terhadap ROA. Sedangkan variabel NPL, GCG dan CAR tidak berpengaruh signifikan. Kemampuan prediksi dari ketujuh variabel  tersebut  terhadap  ROA  dalam  penelitian  ini  sebesar  93,7%,  sedangkan sisanya 6,3% dipengarui oleh faktor lain yang tidak dimasukkan ke dalam model penelitian.

  3. ANALISIS KADAR SIKLAMAT PADA ES KRIM DI KOTA BANJARBARU

    Directory of Open Access Journals (Sweden)

    Nurlailah Nurlailah

    2017-07-01

    Full Text Available Pemanis merupakan salah satu komponen yang sering ditambahkan dalam bahan makanan. Pemanis buatan yang banyak beredar di masyarakat adalah siklamat. Konsumsi siklamat yang melebihi dosis akan mengakibatkan kanker kandung kemih. Selain itu akan menyebabkan tumor paru, hati, dan limfa. Tujuan penelitian ini adalah untuk mengetahui adanya siklamat dalam es krim yang melebihi ambang batas yang dipersyaratkan. Jenis penelitian ini adalah survey deskriptif. Sampel penelitian adalah es krim produksi rumah tangga dari seluruh pedagang es krim di Banjarbaru utara yaitu dengan jumlah 11 pedagang es krim. Variabel dalam penelitian ini adalah kadar siklamat yang terdapat dalam es krim. Hasil penelitian menunjukkan dari 11 sampel es krim yang diperiksa, 9 sampel mengandung siklamat dengan kadar tertinggi 7,37 g/kg sebagai asam siklamat. Kesimpulan penelitian ini adalah es krim yang mengandung siklamat ditemukan sebanyak 82% (9 sampel, sedangkan 18% (2 sampel lainnya negatif, dari 9 sampel yang positif mengandung siklamat, 89% tidak memenuhi syarat PERMENKES Nomor 208 tahun 1985 yaitu melebihi 2 gr/kg sebagai asam siklamat. Perlu dilakukan pemeriksaan yang lebih spesifik untuk analisis kadar siklamat dengan metode lain seperti Kromatografi Cair Kinerja Tinggi (KCKT

  4. ANALISIS OMNICHANNEL CUSTOMER EXPERIENCE MATURITY DI PT. TELEKOMUNIKASI INDONESIA

    Directory of Open Access Journals (Sweden)

    Andreas W. Yanuardi

    2017-02-01

    Full Text Available Customer Experience yang baik mampu meningkatkan kepuasan pelanggan, sehingga membuat pelanggan menjadi setia terhadap penyedia jasa. Pentingnya Customer Experience ini membuat banyak perusahaan ber fokus dalam membangun strategi Customer Experience - nya. Salah satu strategi C ustomer Experience untuk meningkatkan kepuasan pelanggan adalah dengan Omnichannel Customer Experience . Prinsip Omnichannel adalah melakukan integrasi data di semua saluran komunikasi pelanggan sehingga perusahaan mendapatkan pandangan 360 o terhadap pelang gan, atau disebut “ single customer view ”. Integrasi data memungkinkan pelanggan melakukan interaksi dengan perusahaan melalui saluran manapun yang diinginkannya, tanpa harus mengulang informasi ketika ia berpindah saluran. Single customer view kemudian mem ungkinkan perusahaan melakukan personalisasi, yaitu memberikan pelayanan kepada pelanggan secara personal sesuai profil, aktivitas, perilaku, dan ketertarikan pelanggan tersebut. PT Telekomunikasi Indonesia Tbk , sebagai salah satu Communication Service Provider (CSP , telah mengimplementasikan strategi Omnichannel . Penelitian ini bertujuan mengukur maturity level dari implementasi Omnichannel Customer Experience PT Telekomunikasi Indonesia Tbk berdasarkan aspek - aspek dalam Omnichannel Maturity Model , men ggunakan metode expert judgment. Hasil analisis menunjukkan bahwa Telkom telah melakukan inisiasi implementasi Omnichannel Customer Experience dengan diterapkannya platform single window yang terintegrasi di semua saluran pelanggan dan dari sembilan dimensi p engukuran Omnichannel Maturity Model mayoritas sudah berada pada level Cross Channel .

  5. Analisis Kesulitan Belajar Mahasiswa Dalam Memahami Konsep Bilangan Real

    Directory of Open Access Journals (Sweden)

    Lalu Sucipto

    2017-02-01

    Full Text Available [Bahasa]: Penelitian ini bertujuan untuk mengetahui jenis-jenis kesulitan dan faktor-faktor penyebab kesulitan yang dihadapi oleh mahasiswa dalam mengerjakan soal bilangan real. Penelitian ini merupakan penelitian kualitatif dengan menggunakan analisis deskriptif. Data dikumpulkan melalui observasi, tes dan wawancara. Hasil tes dikelompokkan berdasarkan tujuh kategori kesalahan Watson kemudian dilakukan wawancara untuk mengklarifikasi kesalahan tersebut.Hasil penelitian ini menunjukkan bahwa jenis kesalahan yang dominan terjadi pada jawaban mahasiswa berupa jenis kesalahan data tidak tepat, prosedur yang tidak tepat, konflik level respon, dan masalah hirarkhi keterampilan. Kesalahan mahasiswa dalam mengerjakan soal memberikan gambaran kesulitan yang dialami dalam memahami konsep bilangan real. Faktor yang mempengaruhi kesulitan mahasiswa yaitu: materi yang sulit dipahami dan diaplikasikan dalam pemecahan masalah; dan faktor pribadi yang mencakup pola belajar yang tidak baik, sarana pendukung, dan faktor dosen. [English]: This research aims to identify undergraduate students’ difficulties and the factors which caused them in solving real analysis problems. This qualitative research applies descriptive analysis. Data is collected through observation, test, and interview. Students’ answers on test are categorized into Watson’s seven categories of errors then the students are interviewed to clarify the errors. This research reveals that dominant errors encounterd by the students are inappropriate data, inappropriate procedure, response level conclict, and skill hierarchy problem. The errors portrait the difficulties the students encountered. The factors which cause the difficulties are the material is hard to understand and apply to problem solving; and personal factor such as bad learning habits, supporting tools, and the lecturers.

  6. Neutronic reactor

    International Nuclear Information System (INIS)

    Lewis, W.R.

    1978-01-01

    Disclosed is a graphite-moderated, water-cooled nuclear reactor including a plurality of rectangular graphite blocks stacked in abutting relationship in layers, alternate layers having axes which are normal to one another, alternate rows of blocks in alternate layers being provided with a channel extending through the blocks, said channeled blocks being provided with concave sides and having smaller vertical dimensions than adjacent blocks in the same layer, there being nuclear fuel in the channels

  7. Nuclear reactors

    International Nuclear Information System (INIS)

    Humphreys, P.; Davidson, D.F.; Thatcher, G.

    1980-01-01

    The cooling system of a liquid metal cooled fast breeder nuclear reactor of the pool kind is described. It has an intermediate heat exchange module comprising a tube-in-shell heat exchanger and an electromagnetic flow coupler in the base region of the module. Primary coolant is flowed through the heat exchanger being driven by electromagnetic interaction with secondary liquid metal coolant flow effected by a mechanical pump. (author)

  8. Nuclear reactor

    International Nuclear Information System (INIS)

    Jungmann, A.

    1975-01-01

    Between a PWR's reactor pressure vessel made of steel and the biological shield made of concrete there is a gap. This gap is filled up with a heat insulation facting the reactor pressure vessel, for example with insulating concrete segments jacketed with sheet steel and with an additional layer. This layer serves for smooth absorption of compressive forces originating in radial direction from the reactor pressure vessel. It consists of cylinder-segment shaped bricks made of on situ concrete, for instance. The bricks have cooling agent ports in one or several rows which run parallel to the wall of the pressure vessel and in alignment with superposed bricks. Between the layer of bricks and the biological shield or rather the heat insulation, there are joints which are filled, however, with injected mortar. That guarantees a smooth series of connected components resistant tom compression. Besides, a slip foil can be set between the heat insulation and the joining joint filled with mortar for the reduction of the friction at thermal expansions. (TK) [de

  9. Reactor building

    International Nuclear Information System (INIS)

    Ebata, Sakae.

    1990-01-01

    At least one valve rack is disposed in a reactor building, on which pipeways to a main closure valve, valves and bypasses of turbines are placed and contained. The valve rack is fixed to the main body of the building or to a base mat. Since the reactor building is designed as class A earthquake-proofness and for maintaining the S 1 function, the valve rack can be fixed to the building main body or to the base mat. With such a constitution, the portions for maintaining the S 1 function are concentrated to the reactor building. As a result, the dispersion of structures of earthquake-proof portion corresponding to the reference earthquake vibration S 1 can be prevented. Accordingly, the conditions for the earthquake-proof design of the turbine building and the turbine/electric generator supporting rack are defined as only the class B earthquake-proof design conditions. In view of the above, the amount of building materials can be saved and the time for construction can be shortened. (I.S.)

  10. Nuclear reactors

    International Nuclear Information System (INIS)

    Yoshioka, Michiko.

    1985-01-01

    Purpose: To obtain an optimum structural arrangement of IRM having a satisfactory responsibility to the inoperable state of a nuclear reactor and capable of detecting the reactor power in an averaged manner. Constitution: As the structural arrangement of IRM, from 6 to 16 even number of IRM are bisected into equial number so as to belong two trip systems respectively, in which all of the detectors are arranged at an equal pitch along a circumference of a circle with a radius rl having the center at the position of the central control rod in one trip system, while one detector is disposed near the central control rod and other detectors are arranged substantially at an equal pitch along the circumference of a circle with a radius r2 having the center at the position for the central control rod in another trip system. Furthermore, the radius r1 and r2 are set such that r1 = 0.3 R, r2 = 0.5 R in the case where there are 6 IRM and r1 = 0.4 R and R2 = 0.8 R where there are eight IRM where R represents the radius of the reactor core. (Kawakami, Y.)

  11. MLR reactor

    International Nuclear Information System (INIS)

    Ryazantsev, E.P.; Egorenkov, P.M.; Nasonov, V.A.; Smimov, A.M.; Taliev, A.V.; Gromov, B.F.; Kousin, V.V.; Lantsov, M.N.; Radchenko, V.P.; Sharapov, V.N.

    1998-01-01

    The Material Testing Loop Reactor (MLR) development was commenced in 1991 with the aim of updating and widening Russia's experimental base to validate the selected directions of further progress of the nuclear power industry in Russia and to enhance its reliability and safety. The MLR reactor is the pool-type one. As coolant it applies light water and as side reflector beryllium. The direction of water circulation in the core is upward. The core comprises 30 FA arranged as hexagonal lattice with the 90-95 mm pitch. The central materials channel and six loop channels are sited in the core. The reflector includes up to 11 loop channels. The reactor power is 100 MW. The average power density of the core is 0.4 MW/I (maximal value 1.0 MW/l). The maximum neutron flux density is 7.10 14 n/cm 2 s in the core (E>0.1 MeV), and 5.10 14 n/cm 2 s in the reflector (E<0.625 eV). In 1995 due to the lack of funding the MLR designing was suspended. (author)

  12. Nuclear reactor

    International Nuclear Information System (INIS)

    Shirakawa, Toshihisa.

    1979-01-01

    Purpose: To prevent cladding tube injuries due to thermal expansion of each of the pellets by successively extracting each of the control rods loaded in the reactor core from those having less number of notches, as well as facilitate the handling work for the control rods. Constitution: A recycle flow control device is provided to a circulation pump for forcibly circulating coolants in the reactor container and an operational device is provided for receiving each of the signals concerning number of notches for each of the control rods and flow control depending on the xenon poisoning effect obtained from the signals derived from the in-core instrument system connected to the reactor core. The operational device is connected with a control rod drive for moving each of the control rods up and down and a recycle flow control device. The operational device is set with a pattern for the aimed control rod power and the sequence of extraction. Upon extraction of the control rods, they are extracted successively from those having less notch numbers. (Moriyama, K.)

  13. Reactor container

    International Nuclear Information System (INIS)

    Hidaka, Masataka; Hatamiya, Shigeo; Kawasaki, Terufumi; Fukui, Toru; Suzuki, Hiroaki; Kataoka, Yoshiyuki; Kawabe, Ryuhei; Murase, Michio; Naito, Masanori.

    1990-01-01

    In order to suppress the pressure elevation in a reactor container due to high temperature and high pressure steams jetted out upon pipeway rupture accidents in the reactor container, the steams are introduced to a pressure suppression chamber for condensating them in stored coolants. However, the ability for suppressing the pressure elevation and steam coagulation are deteriorated due to the presence of inactive incondensible gases. Then, there are disposed a vent channel for introducing the steams in a dry well to a pressure suppression chamber in the reactor pressure vessel, a closed space disposed at the position lower than a usual liquid level, a first channel having an inlet in the pressure suppression chamber and an exit in the closed space and a second means connected by way of a backflow checking means for preventing the flow directing to the closed space. The first paths are present by plurality, a portion of which constitutes a syphon. The incondensible gases and the steams are discharged to the dry well at high pressure by using the difference of the water head for a long cooling time after the pipeway rupture accident. Then, safety can be improved without using dynamic equipments as driving source. (N.H.)

  14. Reactor core in FBR type reactor

    International Nuclear Information System (INIS)

    Masumi, Ryoji; Kawashima, Katsuyuki; Kurihara, Kunitoshi.

    1989-01-01

    In a reactor core in FBR type reactors, a portion of homogenous fuels constituting the homogenous reactor core is replaced with multi-region fuels in which the enrichment degree of fissile materials is lower nearer to the axial center. This enables to condition the composition such that a reactor core having neutron flux distribution either of a homogenous reactor core or a heterogenous reactor core has substantially identical reactivity. Accordingly, in the transfer from the homogenous reactor core to the axially heterogenous reactor core, the average reactivity in the reactor core is substantially equal in each of the cycles. Further, by replacing a portion of the homogenous fuels with a multi-region fuels, thereby increasing the heat generation near the axial center, it is possiable to reduce the linear power output in the regions above and below thereof and, in addition, to improve the thermal margin in the reactor core. (T.M.)

  15. Evaluación preliminar. Tratamiento del mercurio de fluorescentes y bombillas del alumbrado público

    Directory of Open Access Journals (Sweden)

    Juan Carlos Salas-Jiménez

    2015-12-01

    Full Text Available La actividad que se estudia es un proceso para inertizar el mercurio de las luminarias (desechos de bombillos y fluorescentes. Este consiste en triturar y mezclar los desechos con azufre aplicando calentamiento para formar un polímero de sulfuro de mercurio, que resulta un producto sólido, inerte, estable y de baja lixiviación que se puede depositar en un relleno sanitario. El calentamiento causa la generación de vapores de azufre molestos y de olor desagradable, por lo que se realizó un cambio del método de tratamiento sin calentar, mediante el uso de una mezcla del desecho de luminaria con azufre y mortero (cemento y arena. Las pruebas de laboratorio preliminares presentan resultados positivos para efectuar pruebas a nivel de planta piloto con este nuevo método a temperatura ambiente. Este proyecto se desarrolló en una de las actividades productivas del Centro de Investigación en Protección Ambiental (CIPA del Tecnológico de Costa Rica.

  16. Estudio preliminar de la comunidad de hongos endófitos en hojas de café (Coffea arabica

    Directory of Open Access Journals (Sweden)

    Mónica Milena Morales Valencia

    2006-01-01

    Full Text Available Los endófitos son organismos que viven asintomáticamente dentro de tejidos vegetales vivos. Este grupo no está restringido a los hongos sino que también se pueden encontrar bacterias e incluso invertebrados. Hasta el momento han sido poco estudiados, sobre todo en zonas tropicales. En el presente trabajo se hizo un estudio preliminar de la diversidad de la comunidad de hongos endófitos presentes en hojas de café (Coffea arabica en tres sitios del departamento de Cundinamarca, Colombia. Se muestrearon fragmentos foliares que representaron un área total de 2.700 mm2, procedentes de 15 árboles, en los cuales se encontraron 279 individuos de 38 morfotipos diferentes. El taxón más abundante fue Colletotrichum, el cual estuvo representado por el 47% de todos los individuos encontrados. Las comunidades de hongos endófitos estudiadas se ajustaron al modelo de distribución logarítmica normal, es decir, muchas especies raras y pocas abundantes.

  17. Estudo morfoanatômico preliminar do caule e da folha de Acanthospermum australe (Loefl. Kuntze (Asteraceae-Heliantheae

    Directory of Open Access Journals (Sweden)

    Lúcia R. Rocha Martins

    Full Text Available Descrições morfoanatômicas preliminares do caule e da folha de Acanthospermum australe (Loefl. Kuntze foram realizadas a partir de material vegetal fresco e fixado. Secções transversais e paradérmicas, coradas com safranina/azul de astra e azul de toluidina foram analisadas ao microscópio. As superfícies do caule e da folha foram observadas através de microscopia eletrônica de varredura. A. australe apresenta, tanto no caule quanto na folha, tricomas tectores pluricelulares, unisseriados e de extremidades afiladas, e glandulares discóides, com pedúnculo curto unicelular, no qual se prendem cinco séries de células. A folha é anfiestomática e os estômatos são do tipo anomocítico, levemente proeminentes em relação ao nível das demais células epidérmicas. O caule apresenta crescimento secundário inicial, destacando-se os ductos secretores no parênquima cortical e medular.

  18. Analisis Zona Permeabel Fluida Sistem Panas Bumi Gunungapi Slamet Berdasarkan Analisis Kerapatan Kelurusan Citra SRTM Dan Struktur Geologi

    Directory of Open Access Journals (Sweden)

    Sachrul Iswahyudi

    2016-03-01

    Full Text Available Keberadaan manifestasi panasbumi di sekitar Gunungapi Slamet tidak dapat dipisahkan dari zona-zona permeabilitas yang berkembang. Lokasi-lokasi lulus air tersebut (zona permeabel yang memungkinkan terbentuknya sirkulasi fluida tempat air masuk untuk mengisi reservoir panas bumi dan air keluar ke permukaan bumi sebagai manifesatasi mata air panasbumi di sekitar Gunungapi Slamet. Publikasi yang berupa hasil penelitian ini mencoba mengidentifikasi zona-zona permeabel tersebut berdasarkan anaslisis kerapatan kelurusan yang terekam dalam citra SRTM. Identifikasi kelurusan-kelurusan pada citra berdasarkan komponen-komponen interpretasi citra, yaitu tona, tekstur, pola, bentuk dan relief. Hasil analisis tersebut dikompilasi dengan data struktur geologi regional yang sebelumnya telah diidentifikasi dan data lapangan berupa manifestasi mata air panas. Lokasi-lokasi dengan kerapatan kelurusan yang tinggi pada citra SRTM umumnya bersesuaian dengan zona struktur geologi regional keberadaan manifestasi mata air panas. Daerah tersebut memanjang relatif utara-selatan di bagian barat dan timur-barat di bagian selatan peta. Daerah-daerah inilah yang merupakan daerah lulus air tempat fluida bersirkulasi membentuk sistem panasbumi Gunungapi Slamet.

  19. Analysis of the preliminary trajectory of emergency venting of the nuclear power plant of Laguna Verde using RELAP5; Analisis de la trayectoria preliminar del venteo de emergencia de la Central Laguna Verde mediante RELAP5

    Energy Technology Data Exchange (ETDEWEB)

    Cecenas F, M.; Jimenez S, R.; Ovando C, R. [Instituto Nacional de Electricidad y Energias Limpias, Reforma No. 113, Col. Palmira, 42490 Cuernavaca, Morelos (Mexico); Tijerina S, F.; Tapia M, R. N., E-mail: mcf@iie.org.mx [Comision Federal de Electricidad, Central Nucleoelectrica Laguna Verde, Subgerencia de Ingenieria, Carretera Veracruz-Medellin Km. 7.5, 94271 Veracruz (Mexico)

    2016-09-15

    For a commercial nuclear plant, the availability of a vent line to the atmosphere is an improvement to achieve the prevention and mitigation of the consequences of a severe accident. The importance of this system received greater attention after the Fukushima accident in 2011. Subsequently, in 2012 and 2013, the United States Nuclear Regulatory Commission issued documents stating that the venting must be able to dislodge 1% of the rated thermal power of the core without over pressurizing the primary container. To analyze the venting of the nuclear power plant of Laguna Verde, the line and the primary container are modeled using the thermo-hydraulic code RELAP5, simulating a release of 1% of the nominal licensed power to the container in the form of saturated steam. The vent has no problem to evacuate the energy and manages to keep the container without exceeding its design limit, and the highest percentage of thermal power that can channel the vent to the outside is approximately 3%. A sensitivity analysis increasing the diameter of the line to 14 inches allows increasing in 10% the percentage of power that can be vented to the outside without problem for the containment. (Author)

  20. Molten salt reactors: reactor cores

    International Nuclear Information System (INIS)

    1983-01-01

    In this critical analysis of the MSBR I project are examined the problems concerning the reactor core. Advantages of breeding depend essentially upon solutions to technological problems like continuous reprocessing or graphite behavior under neutron irradiation. Graphite deformation, moderator unloading, control rods and core instrumentation require more studies. Neutronics of the core, influence of core geometry and salt composition, fuel evolution, and thermohydraulics are reviewed [fr

  1. Analisis Neraca Air Lahan untuk Tanaman Padi dan Jagung Di Kota Bengkulu

    Directory of Open Access Journals (Sweden)

    Jaka A. I. Paski

    2018-01-01

    Citation: Paski, J.A.I., Faski, G.I.S.L., Handoyo, M.F. dan Pertiwi, D.A.S. (2017. Analisis Neraca Air Lahan untuk Tanaman Padi dan Jagung di Kota Bengkulu. Jurnal Ilmu Lingkungan, 15(2, 83-89, doi:10.14710/jil.15.2.83-89

  2. ANALISIS RASIO ALTMAN MODIFIKASI PADA PREDIKSI KEBANGKRUTAN PERUSAHAAN PROPERTY DAN REAL ESTATE YANG TERDAFTAR DI BEI

    OpenAIRE

    Anita Tri Widiyawati; Supri Wahyudi Utomo; Nik Amah

    2015-01-01

    Penelitian ini bertujuan untuk mengetahui pengaruh rasio Altman Modifikasi terhadap prediksi kebangkrutan. Jenis penelitian ini termasuk penelitian kuantitatif. Populasi dalam penelitian ini adalah perusahaan property dan real estate yang terdaftar di BEI. Teknik pengambilan sampel menggunakan purposive sampling sehingga diperoleh sampel sejumlah 32 perusahaan property dan real estate yang menerbitkan laporan keuangannya selama tahun 2011-2013. Teknik analisis data menggunakan regresi logisti...

  3. Analisis Perbandingan Material Slab Beton Pada Perkerasan Apron Dengan Menggunakan Program Bantu Elemen Hingga

    Directory of Open Access Journals (Sweden)

    Hendrawan Setyo Warsito

    2016-04-01

    Full Text Available Kekuatan slab beton sangat dipengaruhi oleh jenis material yang dipakai. Jenis material yang dimaksud adalah material beton dengan menggunakan PC (Portland Cement dan penggunaan geopolimer dalam komposisi campuran slab beton. Beton geopolimer merupakan beton yang ramah lingkungan. Permasalahan lain yang timbul adalah letak roda pesawat tidak selalu berada pada titik yang sama disuatu permukaan slab beton apron. Pada tugas akhir ini dimaksudkan untuk menganalisis suatu slab beton yang dibebani roda pesawat dengan campuran variasi material beton dan variasi letak roda pesawat pada slab beton dengan program bantu metode elemen hingga. Dengan data pergerakan pesawat, spesifikasi apron bandara Juanda kondisi eksisting. Dilakukan perhitungan tebal slab beton menggunakan software FAARFIELD dan diperoleh tebal slab beton sebesar 442,5 mm. Dari analisis program bantu elemen hingga dapat diperoleh tegangan pada slab beton yang ditimbulkan oleh pembebanan roda pesawat. Hasil validasi dari analisis tegangan menggunakan program bantu elemen hingga dengan analisis Westergaard yaitu memiliki nilai tegangan yang hampir sama pada ketebalan slab beton 450mm. Nilai tegangan tiap-tiap material beton menunjukan nilai tebal slab beton yang diijinkan untuk tipe pesawat tertentu. Dari analisis menggunakan program bantu elemen hingga tebal slab beton yang diijinkan untuk material slab beton PC yaitu sebesar 425mm. Sedangkan untuk material beton geopolimer yaitu sebesar  415 mm.

  4. Analisis Faktor Pembentuk Ekuitas Merek Toyota dan Daihatsu di Indonesia (Studi Komparasi pada Masyarakat Bandung)

    OpenAIRE

    Sigiro, Cristine Afriani; Rachma Putri, Yuliani; Ilfandy Imran, Ayub

    2016-01-01

    Toyota dan Daihatsu merupakan dua merek otomotif (mobil) yang sangat fenomenal di kalangan masyarakat Indonesia. Produk dari kedua merek tersebut memiliki persamaan yang identik, namun Toyota memasarkan produknya lebih mahal dibandingkan Daihatsu. Tujuan penelitian ini untuk mengetahui perbandingan ekuitas merek Toyota dan Daihatsu menurut masyarakat Bandung. Penelitian ini menggunakan paradigma penelitian positivistik dengan metode penelitian studi komparatif melalui teknik analisis data yan...

  5. ANALISIS PENGARUH CUSTOMER RELATIONSHIP MANAGEMENT TERHADAP KEPUASAN PELANGGAN PADA PT TELKOMSEL DI MAKASSAR

    OpenAIRE

    ANANDA, RACHMA RESKY

    2015-01-01

    2015 Analisis Pengaruh Customer Relationship Management Terhadap Kepuasan Pelanggan Pada PT Telkomsel di Makassar Analysis of Customer Relationship Management Influence to Customer Satisfaction at PT Telkomsel in Makassar Rachma Resky Ananda Muh. Asdar Yansor Djaya Tujuan dari penelitian ini adalah untuk menganalisis pengaruh Customer Relationship (continuity marketing, one to one marketing dan partnering atau co-marketing) terhadap k...

  6. Increased SRP reactor power

    International Nuclear Information System (INIS)

    MacAfee, I.M.

    1983-01-01

    Major changes in the current reactor hydraulic systems could be made to achieve a total of about 1500 MW increase of reactor power for P, K, and C reactors. The changes would be to install new, larger heat exchangers in the reactor buildings to increase heat transfer area about 24%, to increase H 2 O flow about 30% per reactor, to increase D 2 O flow 15 to 18% per reactor, and increase reactor blanket gas pressure from 5 psig to 10 psig. The increased reactor power is possible because of reduced inlet temperature of reactor coolant, increased heat removal capacity, and increased operating pressure (larger margin from boiling). The 23% reactor power increase, after adjustment for increased off-line time for reactor reloading, will provide a 15% increase of production from P, K, and C reactors. Restart of L Reactor would increase SRP production 33%

  7. Nuclear research reactors

    International Nuclear Information System (INIS)

    1985-01-01

    It's presented data about nuclear research reactors in the world, retrieved from the Sien (Nuclear and Energetic Information System) data bank. The information are organized in table forms as follows: research reactors by countries; research reactors by type; research reactors by fuel and research reactors by purpose. (E.G.) [pt

  8. Nuclear reactor physics course for reactor operators

    International Nuclear Information System (INIS)

    Baeten, P.

    2006-01-01

    The education and training of nuclear reactor operators is important to guarantee the safe operation of present and future nuclear reactors. Therefore, a course on basic 'Nuclear reactor physics' in the initial and continuous training of reactor operators has proven to be indispensable. In most countries, such training also results from the direct request from the safety authorities to assure the high level of competence of the staff in nuclear reactors. The aim of the basic course on 'Nuclear Reactor Physics for reactor operators' is to provide the reactor operators with a basic understanding of the main concepts relevant to nuclear reactors. Seen the education level of the participants, mathematical derivations are simplified and reduced to a minimum, but not completely eliminated

  9. Nuclear reactor

    International Nuclear Information System (INIS)

    Jolly, R.

    1979-01-01

    The support grid for the fuel rods of a liquid metal cooled fast breeder reactor has a regular hexagonal contour and contains a large number of unit cells arranged honeycomb fashion. The totality of these cells make up a hexagonal shape. The grid contains a number of strips of material, and there is a window in each of three sidewalls staggered by one sidewall. The other sidewalls have embossed protrusions, thus generating a guide lining or guide bead. The windows reduce the rigidity of the areas in the middle between the ends of the cells. (DG) [de

  10. Nuclear reactor

    International Nuclear Information System (INIS)

    Anthony, A.J.; Gruber, E.A.

    1979-01-01

    A nuclear reactor with control rods in channels between fuel assemblies wherein the fuel assemblies incorporate guide rods which protrude outwardly into the control rod channels to prevent the control rods from engaging the fuel elements. The guide rods also extend back into the fuel assembly such that they are relatively rigid members. The guide rods are tied to the fuel assembly end or support plates and serve as structural members which are supported independently of the fuel element. Fuel element spacing and support means may be attached to the guide rods. 9 claims

  11. PRE-LIMINAR JUDGMENT OF PROCEDENCE IN REPLICATION SUITS BY MAGISTRATES: A VIABLE ALTERNATIVE AGAINST PROCESS DELAYS IN CIVIL STATE COURTS

    OpenAIRE

    Souza, Roberta Kelly Silva; Universitá di Pisa, UNIPI, Itália; Seixas, Bernardo Silva de; Universitá di Pisa, UNIPI, Itália

    2015-01-01

    Laws 9099/95, 10259/01 and 12152/09, which respectively regulate the Special State, Federal and Fiscal Courts, were published so that access to justice in Brazil may be broadened. However, after twenty years of the establishment of State Special Civil Courts, they are so full up with suits that they have not served their function to de-bureaucratize justice and provide a fast access to justice to the Brazilian population. Current study demonstrates that the application of pre-liminar judgment...

  12. Caracterización preliminar de la jalea de propóleos al 10 % para uso estomatológico

    OpenAIRE

    Padró-Rodríguez, Lourdes; Chil-Núñez, Idelsys

    2014-01-01

    El propóleos constituye la base de muchas formulaciones farmacéuticas. El presente trabajo propone la caracterización preliminar de una jalea de propóleos para el tratamiento de la gingivitis. Se realizó un estudio en el Laboratorio de Tecnología Farmacéutica de la Universidad de Oriente en el periodo marzo-mayo 2013; por medio del empleo del método de incorporación se procedió a la elaboración de la jalea, a la cual se le evaluaron los parámetros de calidad establecidos. Los mismos mostraron...

  13. Estrategias funcionales emergentes de promoción por parte de los ejecutivos del negocio bancario: Estudio preliminar a la Banca en Maracaibo

    OpenAIRE

    Emmanuel Borgucci; Roberto Cubillán

    2003-01-01

    En esta investigación de carácter preliminar, se trata de demostrar la existencia de estrategias funcionales emergentes por parte de los ejecutivos de negocios bancarios. Se diseñó una investigación de tipo descriptivo y se aplicó un cuestionario semiestructurado y validado con el procedimiento del pretest-test a 16 ejecutivos del área petrolera pertenecientes a 10 bancos ubicados en Maracaibo (Venezuela). Se concluye que sobre la base de una serie de habilidades personales y oper...

  14. MOMIAS Y HUESOS EN LA NECRÓPOLIS DEL ESPIGÓN (PUNTALLANA, LA PALMA. ESTUDIO BIOANTROPOLÓGICO PRELIMINAR DE UNA CULTURA DESAPARECIDA

    Directory of Open Access Journals (Sweden)

    Nuria Álvarez Rodríguez

    2017-02-01

    Full Text Available El Barranco del Espigón ocupa un lugar sobresaliente dentro de la etapa prehispánica palmera debido al hallazgo de una importante necrópolis en la que aparecieron restos humanos momificados, siendo estos los únicos de estas características que hoy en día se conoce su procedencia exacta. Este artículo intentará hacer un breve recorrido sobre las formas de vida de los benahoaritas en el Barranco del Espigón así como un pequeño estudio preliminar de los restos óseos humanos encontrados.

  15. Diseño preliminar de la configuración de cabina para la aeronave de entrenamiento primario phaeton PT-01

    Directory of Open Access Journals (Sweden)

    Juan Esteban Gaviria García

    2009-01-01

    Full Text Available El espacio en cabina de una aeronave influye directamente en las capacidades de la tripulación a la hora de realizar su trabajo. La comodidad, el ambiente, Ia iluminacion, la forma en que se presenta toda Ia información de la aeronave en los instrumentos son algunos de los factores que son considerados en toda situación de vuelo. La metodología de diseiio preliminar de este espacio de cabina y su interacción con la tripulacion basada en procesos de diseño centrados en el ser humano, sera el principal topico de este artículo.

  16. Estudio preliminar de PEP-3 como instrumento de evaluación funcional de niños con Trastorno del Espectro Autista

    OpenAIRE

    Orobal Císcar, Paloma

    2013-01-01

    En el presente estudio, además de traducir, adaptar lingüísticamente y realizar una aplicación preliminar de un instrumento de evaluación funcional del Trastorno del Espectro Autista (TEA) llamado PEP-3 (Perfil Psicoeducativo-3ªEdición); se han realizado dos aplicaciones del instrumento a un grupo de 10 niños y niñas con TEA atendidos en un Centro de Atención Temprana de Valencia con el objetivo de analizar la sensibilidad del instrumento para medir cambios tras tres meses de intervención bas...

  17. Resultados preliminares de cultivo intravaginal de ovocitos-inyección intracitoplasmática de espermatozoides (INVO-ICSI), en el centro de fertilidad procrear

    OpenAIRE

    Hilario, Roly; Dueñas, Julio; Gonzales, Max; García, Javier; Romero, Rocío

    2014-01-01

    Objetivos: Conocer los resultados preliminares de tasa de embarazo por transferencia en las pacientes en quienes se realizó cultivo intravaginal de ovocitos-inyección intracitoplasmática de espermatozoides (INVO-ICSI) en un centro de fertilidad. Diseño: Estudio descriptivo de una serie de casos. Institución: Centro de Fertilidad Procrear, Lima, Perú. Participantes: Parejas con tratamiento de infertilidad. Intervenciones: Se analizó todos los 13 procedimientos de INVO-ICSI realizados en 12 pac...

  18. Tipos de especies de insectos descritas de la Comunidad de Madrid, conservados en el Museo Nacional de Ciencias Naturales. Inventario Preliminar

    Directory of Open Access Journals (Sweden)

    Martín Albaladejo, C.

    2006-05-01

    Full Text Available This paper offers a list of insect species described from Comunidad de Madrid whose types are kept in the Collection of Entomology of the Museo Nacional de Ciencias Naturales (MNCN. This preliminary inventory includes 505 species and subspecific taxa.

    Este trabajo ofrece una relación de las especies de insectos que han sido descritas de la Comunidad de Madrid y cuyos ejemplares tipo se conservan en la Colección de Entomología del Museo Nacional de Ciencias Naturales (MNCN. Este inventario preliminar recoge 505 especies y táxones subespecíficos.

  19. Escritura colaborativa en línea. Un estudio preliminar orientado al análisis del proceso de co-autoría

    OpenAIRE

    Bustos Sánchez, Alfonso

    2009-01-01

    Se presenta el análisis exploratorio del seguimiento de una actividad de escritura colaborativa en línea. Desde una perspectiva que integra las ideas de la escritura como una herramienta para aprender y el aprendizaje colaborativo, diseñamos una metodología para el seguimiento del proceso de escritura colaborativa. Se analizaron los resultados de 6 grupos que realizaron un ensayo como producto final en una asignatura de la carrera de Psicología. Los datos preliminares que se prese...

  20. ANALISIS PENGARUH IRADIASI FLUENS NEUTRON CEPAT TERHADAP BERILIUM REFLEKTOR REAKTOR RSG-GAS

    Directory of Open Access Journals (Sweden)

    Sri Kuntjoro

    2015-04-01

    Full Text Available Telah dilakukan analisis iradiasi fluens neutron cepat terhadap berilium reflektor reaktor RSG-GAS. Analisis dilakukan dengan cara melakukan pengukuran fluks neutron di posisi berilium elemen dan berilium blok yang berfungsi sebagai reflector. Selanjutnya dilakukan perhitungan untuk menentukan apakah ada pengaruh fluens neutron selama berilium berada di teras reaktor. Selain cara tersebut dilakukan pula visualisasi untuk memastikan ada tidaknya deformasi pada berilium akibat iradiasi. Hasil pengukuran fluks dan fluens neutron cepat maksimal pada daya 200 kW untuk berilium elemen posisi E-2 sebesar 2,30E+07 n/cm2s dan 4,19E+17 n/cm2, J-8 sebesar 3,70E+07 n/cm2s dan 6,74E+17 n/cm2. Hasil pengukutan pada posisi B-3 sebesar 2,19E+12 n/cm2s dan 3,99E+22 n/cm2, G-10 sebesar 2,12E+12 n/cm2s dan 3,86E+22 n/cm2, serta berilium blok posisi (5-6 sebesar 5,02E+07 n/cm2s dan 9,15E+17 n/cm2, (C-D sebesar 2,32E+07 n/cm2s dan 4,23E+17 n/cm2. Deformasi yang diperoleh untuk berilium elemen (∆L/L posisi E-2 sebesar 1,12E-08, J-8 sebesar 1,84E-08, B-3 sebesar 1,60E-03, posisi G-10 sebesar 1,55E-03, sedangkan pada berilium blok di posisi 5-6 sebesar 2,52E-08 dan C-D sebesar 1,13E-08. Dari hasil ini disimpulkan tidak terjadi deformasi pada berilium elemen dan berilium blok. Hasil ini dibuktikan pula dari pengamatan visual, dimana tidak terlihat adanya deformasi pada berilium tersebut. Kata kunci : fluks, fluens, berilium elemen, berilium blok   Analysis of influence fast neutron fluence irradiated to the RSG-GAS beryllium reflector have been done. Methods of analysis was carried out by measuring fluxs neutron in beryllium element and block positio that function as reflector. The calculation done for determination it is there any influence of neutron as long as beryllium in the core. Bisede that, visualization done to make sure it there is any deformation at beryllium as efect of irradiation. Fluxs and fluences of beryllium element measurement result in 200 k

  1. APLIKASI METODE-METODE AGGLOMERATIVE DALAM ANALISIS KLASTER PADA DATA TINGKAT POLUSI UDARA

    Directory of Open Access Journals (Sweden)

    Dewi Rachmatin

    2014-09-01

    Full Text Available ABSTRAK   Analisis Klaster merupakan analisis pengelompokkan data yang mengelompokkan data berdasarkan informasi yang ditemukan pada data. Tujuan dari analisis klaster adalah agar objek-objek di dalam satu kelompok memiliki kesamaan satu sama lain sedangkan dengan objek-objek yang berbeda kelompok memiliki perbedaan. Analisis klaster dibagi menjadi dua metode yaitu metode hirarki dan metode non-hirarki. Metode hirarki dibagi menjadi dua, yaitu metode agglomerative (pemusatan dan metode divisive (penyebaran. Metode-metode yang termasuk dalam metode agglomerative adalah Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward’s Method, Centroid Method dan Median Method. Pada artikel ini dibahas metode-metode agglomerative tersebut yang diterapkan pada data tingkat polusi udara. Masing-masing metode tersebut memberikan jumlah klaster yang berbeda.   Kata Kunci : Analisis Klaster, Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward’s Method, Centroid Method dan Median Method.     ABSTRACT Cluster analysis is an analysis of the data classification based on information found in the data.The objective of cluster analysis is that the objects in the group have in common with each other, while the different objects have different groups. Cluster analysis is divided into two methods : the method of non-hierarchical and hierarchical methods.Hierarchical method is divided into two methods, namely agglomerative methods (concentration and divisive methods (deployment. The methods included in the agglomerative method is Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward 's Method, Method and Median Centroid Method. In this article discussed the agglomerative methods were applied to the data rate of air pollution. Each of these methods provides a different number of clusters.   Keywords: Cluster Analysis , Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward

  2. MENENTUKAN PRIORITAS PILIHAN MAHASISWA DALAM MEMILIH KAMPUS MENGGUNAKAN ANALISIS CONJOINT

    Directory of Open Access Journals (Sweden)

    Maxsi Ary

    2016-03-01

    menganalisis preferensi mahasiswa Jurusan Manajemen Informatika AMIK BSI Bandung dalam memilih kampus. Penelitian preferensi mahasiswa dalam memilih kampus dilakukan dengan mengaplikasikan analisis conjoint menggunakan SPSS 17.0. Cara yang dilakukan adalah dengan memperoleh skor kegunaan yang dapat mewakili setiap aspek faktor jasa kampus yang dimiliki, sehingga dari skor tersebut dapat ditarik kesimpulan tentang atribut apa saja yang paling dipertimbangkan oleh mahasiswa dalam memilih kampus. Hasil preferensi responden yang bernilai paling tinggi adalah faktor Lapangan (14.92%, Kurikulum (13.21%, Akreditasi (12.75%, Dosen (12.13%, Gedung (11.96%, Perpustakaan (11.87%, Jarak (11.66%, dan Iklan (11.46%. Hasil utilitas agregat level faktor/atribut pilihan responden, bahwa responden menyukai jasa pendidikan dalam pemilihan kampus adalah kampus memiliki lapangan, kurikulum terbuka (pihak administasi menyampaikan terlebih dahulu diawal pendaftaran, kampus telah terakreditasi, pilihan dosen senior, ukuran gedung biasa saja (kurang diperhatikan, perpustakaan memiliki banyak koleksi buku, jarak antara rumah dan kampus dekat, dan iklan kurang diperhatikan. Kata Kunci: Statistik Multivariat, Analisis Conjoint, Preferensi

  3. Kembalikan Lagu Anak-anak Indonesia: Sebuah Analisis Struktur Musik

    Directory of Open Access Journals (Sweden)

    Ardipal - -

    2015-12-01

    . Yaitu musik sebagai pengembangan seni di lingkungan tertentu  dan musik sebagai seni komersial. Dari sisi musik komersial, hampir dua dekade terakhir  ini lagu anak-anak menghilang di media massa. Digantikan oleh lagu orang dewasa. Hal ini tentu mempengaruhi perkembangan psikologis, fisik, dan mental anak-anak. Secara teoritik, masalah ini hal ini dapat ditinjau dari produksi musik melalui pendekatan (1 konfik (hegemoni dan (2 interpretasi/makna. Penelitian ini bertujuan untuk membandingkan struktur musik lagu anak-anak dan struktur musik orang dewasa. Data diambil dari lagu anak-anak dan lagu pop orang dewasa. Metoda analisis difokuskan pada fitur lagu berdasarkan struktur musik dan dampaknya. Instrumen kunci dalam penelitian adalah peneliti sendiri dan instrumen pembantu berupa panduan kodifikasi data. Kemudian mendeskripsikan unsur-unsur tersebut yang terdapat dalam beberapa lagu anak-anak dan dewasa. Untuk menjaga keabsahan data, dilakukan kegiatan triangulasi data. Kegiatan analisis data dimulai dari tahap memilih dan mengodifikasi data, menganalisis data sesuai dengan fitur musiknya masing-masing, dan tahap menarik kesimpulan serta verifikasi. Dari data lagu yang diambil sebagai sampel penelitian, terlihat bahwa pola ritmis, melodis, interval, tempo, hingga rentang nada belum laik  dinyanyikan oleh anak-anak. Pemaksaan anak-anak untuk meniru lagu tersebut dapat berakibat fatal seperti kerusakan pita suara, kram otot rahang. Akhirnya, disarankan agar partisipan seni, dan juga Demikian juga jaringan infrastuktur seni, harus dapat memiliki pandangan yang sama dan kuat  dalam pengembangan seni musik di Indonesia, khususnya untuk lagu anak-anak. Kata Kunci: lagu anak-anak, lagu perjuangan, lagu orang dewasa, struktur musik

  4. Analisis Penerapan E-Government di Kabupaten Sragen

    Directory of Open Access Journals (Sweden)

    Yan Andriariza AS

    2013-09-01

    Full Text Available ABSTRAK Kabupaten Sragen merupakan salah satu pemerintah kabupaten yang menerapkan e-government dengan baik, dan merupakan kabupaten yang menjadi percontohan dalam suksesnya penerapan e-government. Karenanya perlu untuk dilakukan analisis penerapan e-government di Kabupaten Sragen, sebagai contoh bagi daerah lain dalam membangun e-government di daerah tersebut. Analisa yang dilakukan antara lain melihat seberapa jauh penerapan G2C, G2B dan G2G di Pemerintah Kabupaten Sragen. Selain itu juga dilakukan analisa menggunakan The UN Web Measure Index, dan analisa terakhir melakukan analisa deskriptif untuk 5 faktor kesuksesan penerapan e-government, yaitu Hukum dan Peraturan, Struktur Organisasi, Proses Bisnis, Teknologi Informasi dan Visi, Objektif dan Strategi. Dari hasil analisis diperoleh kesimpulan bahwa Kabupaten Sragen telah menerapkan G2B dan G2G, serta berada pada tahap awal penerapan G2C, selain itu Kabupaten Sragen juga telah mencapai pemerintahan yang online, tanpa kertas dan transparan. Implementasi e-government di kabupaten Sragen tersebut dapat dikatakan sukses karena telah memenuhi beberapa faktor dalam mencapai kesuksesan implementasi e-government, yaitu hukum dan peraturan, struktur organisasi, teknologi informasi dan visi, objektif dan strategi. Bila dilihat berdasarkan UN Web Measured Index, Kabupaten Sragen telah mencapai tahap 4. Saran yang dapat diberikan melalui penelitian ini adalah untuk unit kerja yang menangani TIK di Kabupaten Sragen akan lebih baik bila dipegang oleh unit kerja setingkat eselon 2 dan perlunya SOP dan peraturan tambahan terkait TIK di Kabupaten Sragen. ABSTRACT Sragen is one of the districts that implement well e-government, and being a model for the successful implementation of e-government. It is necessary to do the analysis of the application of e-government in Sragen, as an example for other regions in developing e-government in the area. Analysis was carried out to see how far the application of G2C

  5. Analisis Karaterisasi Konsentrasi dan Komposisi Partikulat Udara (Studi Case : Surabaya

    Directory of Open Access Journals (Sweden)

    Eka Fithriani Ahmad

    2016-12-01

    Full Text Available Abstrak Pencemaran udara merupakan dampak yang sangat merugikan, tidak hanya bagi manusia tetapi juga akan berdampak buruk bagi ekosistem hewan dan tumbuhan. Pada penelitian ini akan mengkaji pencemaran udara dari Oktober 2012 hingga Februari 2014 melalui penelitian konsentrasi dan komposisi dari partikulat udara dengan ukuran PM 2.5. Penelitian ini bertujuan untuk menentuan sumber asal pencemaran di Surabaya sehingga dapat dijadikan referensi berbasis ilmiah sebagai langkah untuk membuat keputusan dan kebijakan yang tepat dalam menanggulangi dampak pencemaran. Metode pengolahan data dalam penelitian ini adalah dengan menggunakan analisis reseptor modeling yaitu Positif Matrix Factorization (PMF untuk mengetahui sumber asal pencemaran. Hasil pengukuran yang diperoleh pada konsentrasi PM 2,5 adalah 15.05 μg/m3 sehingga telah melebihi baku mutu tahunan yang telah ditetapkan PP 41 tahun 1999, USEPA, maupun WHO. Dalam partikulat terdapat konsentrasi black carbon (BC sebesar 3.20 μg/m3 dan unsur Pb dengan konsentrasi 0.28 μg/m3 yang telah melebihi nilai baku mutu USEPA. Sedangkan hasil analisis reseptor modeling di dapatkan sumber asal polutan berasal dari biomass, vehicle, soil, industri Pb, industri Zn dan indutri Fe. Kata kunci: Partikulat mater 2.5, black carbon, Pb, positive matrix factorization, Surabaya   Abstract Air pollution is a very adverse impact, not only for humans but also the ecosystem of plants and animals. This research examine air pollution from October 2012 until February 2014 through the research of concentration and composition of airborne particulates with a size of PM 2.5 μm. This study aims to determine the origin and location of pollution sources in Surabaya so that it can be used as scientific reference as a step to make the right decisions and policies in tackling the impact of pollution. Data processing method in this research used analysis of receptor modeling that is Positive Matrix Factorization (PMF to determine

  6. ANALISIS POTENSI RETRIBUSI PELAYANAN PASAR DI KABUPATEN KENDAL

    Directory of Open Access Journals (Sweden)

    Herru Dwi Haryono

    2017-06-01

    Full Text Available Selama periode 2008-2012, realisasi retribusi pelayanan pasar ini mengalami tren naik turun. Sedangkan dari target yang ditentukan dalam komponen retribusi pelayanan pasar yakni retribusi pasar, retribusi sampah/kebersihan dan retribusi sewa kios rata-rata selalu terealisasi melebihi target. Penelitian ini bertujuan untuk mengetahui potensi retribusi pelayanan pasar di Kabupaten Kendal dan apakah target yang ditentukan sudah berdasarkan potensi yang ada. Data yang digunakan dalam penelitian ini adalah data sekunder. Data sekunder dalam penelitian ini berupa data yang bersumber dari BPS Kabupaten Kendal, DPPKAD    Kabupaten Kendal, Disperindag  Kabupaten  Kendal dan  UPTD Dinas  Pasar Kabupaten  Kendal.  Metode analisis yang digunakan yakni analisis deskriptif yakni menghitung potensi retribusi pelayanan pasar di Kabupaten Kendal dan membandingkan potensi dengan target dan apakah target yang ditentukan sesuai berdasarkan potensi yang ada. Hasil penelitian menunjukkan bahwa (1 potensi retribusi pelayanan pasar di Kabupaten Kendal sebesar Rp.5.130.789.600 pertahun. (2 target retribusi pelayanan pasar di Kabupaten Kendal selalu berada dibawah potensi yang ada, jadi kesimpulannya bahwa mekanisme penentuan target tidak berdasarkan potensi yang ada. Berdasarkan hasil anasilis data tersebut, saran yang dapat disampaikan adalah agar pemerintah daerah ataupun pengelola pasar dapat memanfaatkan secara maksimal potensi yang ada agar realisasi penerimaan retribusi pelayanan pasar dapat ditingkatkan lagi dan hendaknya mengevaluasi mekanisme penetapan target berdasarkan potensi yang ada agar kinerja pemerintah maupun pengelola pasar dapat ditingkatkan lagi yang akan berdampak pada realisasi penerimaan retribusi pelayanan pasar. During the period 2008-2012, the actual levy of service this market has been trending up and down. While the targets specified in the component market services levy market fees, garbage fees / levies hygiene and the average

  7. ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI IMPOR BAJA DI INDONESIA

    Directory of Open Access Journals (Sweden)

    Jhonson Agustinus Pasaribu

    2017-06-01

    Full Text Available Impor baja terus mengalami peningkatan dari tahun 1980-2012, hal ini disebabkan karena tingkat produksi baja tidak mampu mengimbangi dan memenuhi tingkat konsumsi baja. Penelitian ini bertujuan untuk menganalisis faktor-faktor yang mempengaruhi impor baja di Indonesia. Metode analisis yang digunakan adalah Error Corection Model (ECM. Pengujian secara parsial digunakan uji t-statistik dan pengujian secara serempak digunakan uji F-statistik. Hasil penelitian ini menunjukan bahwa Produksi baja berpengaruh negatif dan signifikan terhadap impor baja dalam jangka panjang dan jangka pendek. Konsumsi baja menunjukan pengaruh positif dan signifikan terhadap impor baja dalam jangka panjang dan jangka pendek. Gross Domestic Product (GDP menunjukan pengaruh yang negatif dan tidak signifikan terhadap impor baja dalam jangka panjang dan jangka pendek. Nilai tukar rupiah (Kurs menunjukan pengaruh yang positif dan tidak signifikan terhadap impor baja dalam jangka panjang dan jangka pendek.  The steel import keep having enhancement from 1980 to 2012, it’s because of steel production level can’t fulfill the steel consumption level. If the high level of the steel import volume continues, domestic steel industries will run into a low impact for Indonesian’s economy. The goal of this research analize the affecting factors of steel import in Indonesia. The analytical method use the Error Correction Model (ECM. The partial test use t-statistic and the simultan test use F-statistic. The results showed that the steel production has negative and significant effect on steel import in the long term and short term. The steel consumption has positive and significant effect on steel import in the long term and short term. The Gross Domestic Product (GDP has negative and not significant effect on steel import in the long term and short term. The exchange rate indicates positive and not significant effect on steel import in the long term and short term.

  8. ANALISIS REKRUITMEN TENAGA PENDIDIK PADA SD KALAM KUDUS PEKANBARU

    Directory of Open Access Journals (Sweden)

    Murnawati Murnawati

    2015-04-01

    Full Text Available Abstrak: Penelitian ini dilakukan untuk mengetahui sistem rekrutmen tenaga pendidik pada SD kalam kudus kota Pekanbaru. Populasi dalam penelitian ini adalah tenaga pendidik di SD Kalam Kudus Kota Pekanbaru, kebutuhan guru sebanyak 65 sedangkan guru tetap sebanyak 40 guru dan sisanya guru honor sebanyak 25 guru. Dalam penelitian ini penulis mengambil sampel seluruh populasi. Pengambilan sampel dilakukan secara sensus. Data yang digunakan adalah data primer yang diperoleh dari wawancara langsung dan penyebaran kuesioner. Analisis data dalam penelitian ini adalah menggunakan metode deskriptif. Berdasarkan hasil penelitian dapat disimpulkan bahwa persyaratan administrasi dalam rekruitmen guru diperoleh rata – rata skor sebesar 3,49. Artinya persyaratan administrasi dalam rekruitmen guru pada SD Kalam Kudus Pekanbaru dinilai baik. Abstract: This research aimed to determine the system of teachers’s recruitment in Kalam Kudus elementary school of Pekanbaru. The population in this study were educators in in Kalam Kudus elementary school of Pekanbaru, the teacher needs as much as 65 while the teacher remains as much as 40 teachers and teacher salaries remaining 25 teachers. In this study the authors took samples of the entire population. Sampling was done by census. The data used is primary data obtained from interviews and questionnaires. Data analyzed by descriptive method. Based on the results of this study concluded that the administrative requirements for the recruitment of teachers obtained average - average score of 3.49. This means that the administrative requirements for the recruitment of teachers in elementary Holy Kalam Pekanbaru considered good. Kata Kunci : Rekruitmen, Tenaga Pendidik

  9. ANALISIS EFEKTIVITAS PEMBERIAN PINJAMAN PROGRAM PEMBIAYAAN UMKM OLEH KOPERASI

    Directory of Open Access Journals (Sweden)

    Hadi Ismanto

    2014-10-01

    Full Text Available Abstrak: Analisis Efektivitas Pemberian Pinjaman Program Pembiayaan UMKM Oleh Koperasi. Program Pembiayaan memiliki peran yang penting bagi UMKM, namun sering menghadapi masalah penunggakan dan kemacetan pembayaran angsuran. Penelitian ini berupaya untuk mengetahui sebab-sebab tidak lancarnya pengembalian Program Pembiayaan UJKS sehingga diharapkan dapat menyusun strategi yang lebih baik lagi dalam menyeleksi calon peminjam agar angka pinjaman bermasalah dapat ditekan. Populasi dalam penelitian ini adalah semua UMKM yang menjadi Peminjam (peminjam program pembiayaan UJKS Mitra Usaha dan masih tergolong aktif hingga bulan November 2013 dan telah memperoleh fasilitas pembiayaan sekurang-kurangnya enam bulan berjalan. Penelitian ini menemukan bahwa faktor-faktor yang berpengaruh positif terhadap tingkat pengembalian pinjaman (lancar atau menunggak adalah omzet usaha, lama usaha dan nilai plafon pinjaman. Hal ini dapat dijadikan bahan pertimbangan bagi UJKS dalam menjalankan program pembiayaan sehingga menjadi lebih efektif dalam menjalankannya.   Kata Kunci: UMKM, UJKS, Program Pembiayaan, Lancar, dan Macet.   Abstract: Effectiveness Analysis of SMEs Financing Program by Cooperative. Financing programs have an important role to SMEs, but often face the problem of repayment failures and installment payments. This study examines the causes of saving and loan cooperatives’ repayment problems. The population of this study is all SMEs borrowing from Mitra Usaha saving and loan cooperative. Furthermore these SMEs must be categorized as active SMEs until November 2013 and they had been receiving loan for at least six months. The study found that the variables such as: the length of the business, the business volume, and the value of the loan have a positive impact on repayment rate.   Keywords: SMEs, Saving and Loan Cooperative, Financing Program

  10. Analisis Kinerja Penerapan Container untuk Load Balancing Web Server

    Directory of Open Access Journals (Sweden)

    Muhammad Agung Nugroho

    2016-12-01

    Full Text Available Container merupakan teknologi virtualisasi terbaru. Container memudahkan system administrator dalam mengelola aplikasi pada server. Docker container dapat digunakan untuk membangun, mempersiapkan, dan menjalankan aplikasi. Dapat membuat aplikasi dari bahasa pemrograman yang berbeda pada lapisan apapun. Aplikasi dapat di bungkus dalam container, dan aplikasi dapat berjalan pada lingkungan apapun dimana saja.  Dalam perkembangannya container ini dapat digunakan untuk load balancing, dengan memanfaatkan HA Proxy. Load Balancing dapat digunakan untuk menyelesaikan permasalahan beban kinerja web server yang terlalu berat (overload terhadap permintaan. Load Balancing merupakan salah satu metode untuk meningkatkan skalabilitas web server sekaligus mengurangi beban kerja web server. Ujicoba dilakukan dengan memberikan beban request pada single container dan multi container, dan membandingkan kinerjanya. Analisis kinerja dapat dilakukan dengan menggunakan parameter performance pada processor, memori dan proses layanan. Penerapan ujicoba dilakukan pada raspberry pi. Hasil yang diperoleh multi container dapat digunakan untuk mengembangkan metode load balancing, hasil ujicoba menunjukkan performance raspberry pi dapat optimum karena pembagian beban processor.

  11. ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI PENERIMAAN PAJAK

    Directory of Open Access Journals (Sweden)

    Phany Ineke Putri

    2013-09-01

    Full Text Available The purpose of this study was to analyze the influence of population, income per capita, inflation and the number of Trade Permit toward billboard tax revenue in Purbalingga. The results of this study is expected to provide benefit and input to the Local Government of Purbalingga, especially Departement of management of financial income and regional asset. Analysis tool used is multiple linear regression (Multiple Linear Regression Method by the method of least squares Ordinary Least Square (OLS. Jointly test results showed that overall independent variables (population, income per capita, inflation, and the number of trade permit together to show their effects on the billboard tax revenue. Adjusted R-Squared value of 0,951, which means 95,1 percent of the four independent variables. While the remaining 4,9 percent is explained by other causes outside the model. The results showed that the per capita income variable and the number of trade permit have a significant positive effect, the inflation variable has a significant negative effect, whereas a number of population variable have a positive effect which is not significant at α = 5 percent of tax revenue in Purbalingga billboard. Tujuan dari penelitian ini adalah untuk menganalisis pengaruh jumlah penduduk, pendapatan per kapita, inflasi dan jumlah surat ijin usaha perdagangan (SIUP terhadap penerimaan pajak reklame di Kabupaten Purbalingga. Manfaat penelitian ini diharapkan menjadi bahan masukan Pemerintah Kabupaten Purbalingga khususnya Dinas Pengelolaan, Pendapatan, Keuangan dan Aset Daerah. Teknik analisis yang digunakan adalah regresi berganda dengan metode Ordinary Least Square (OLS. Hasil penelitian menunjukkan ada pengaruh secara bersama-sama variabel jumlah penduduk, pendapatan per kapita, inflasi dan jumlah surat ijin usaha perdagangan terhadap penerimaan pajak reklame. Koefisien determinasi 95,1% dapat dijelaskan oleh variabel independen terhadap variabel dependen, dan sisanya

  12. Analisis Elektron Beam Profile Constancy pada Pesawat Linac

    Directory of Open Access Journals (Sweden)

    Edi Guritna

    2018-02-01

    Full Text Available Radioterapi adalah pengobatan penyakit terutama tumor atau kanker ganas dengan menggunakan radiasi elektromagnetik (Sinar-X dan Gamma dan radiasi partikel (elektron, proton, dan neutron. Salah satu alat radioterapi modern yang digunakan dalam pengobatan penyakit kanker adalah linear accelerator (linac. Alat radioterapi ini menghasilkan elektron dan sinar-X (foton yang dibangkitkan oleh generator dan mempunyai energi yang bervariasi. Dalam penelitian profil dosis, digunakan pesawat liner accelerator (linac Siemens Primus berkas elektron 5 MeV dengan luas lapangan radiasi berkisar dari 5×5 cm2 sampai 25×25 cm2. Pengukuran profil dosis dilakukan dengan menggunakan water phantom,  detektor farmer chamber dan condenser chamber yang dilengkapi dengan  computer control units (CCU serta dilakukan untuk arah crossline dan inline pada kedalaman Dmax dan kedalaman tertentu. Penelitian ini bertujuan untuk menganalisis profil berkas sinar elektron energi 5 MeV pada kedalaman tertentu dan Dmax dengan variasi luas lapangan 5×5 cm2, 10×10 cm2, 15×15 cm2, 20×20 cm2, 25×25 cm2. Hasil analisis profil dosis pada berkas elektron 5 MeV menunjukkan bahwa lapangan 5×5 cm2 memiliki nilai flatness yang cukup besar sehingga dalam kalibrasi maupun terapi radiasi perlu diperhatikan penggunaan  luas lapangan tersebut. Dalam penelitian ini juga didapatkan bahwa nilai flatness paling ideal (nilai flatness rendah terjadi pada lapangan 15×15 cm2. Sehingga ada luas lapangan lain yang bisa digunakan untuk treatment maupun kalibrasi selain 10×10 cm2 yaitu 15×15 cm2 yang memiliki nilai flatness rendah.

  13. ANALISIS JENIS, JUMLAH DAN MUTU SARAPAN PAGI SISWA SEKOLAH DASAR

    Directory of Open Access Journals (Sweden)

    Sopiyandi Sopiyandi

    2016-01-01

    Full Text Available Abstract: Type Analysis, Number and Quality Breakfast of Children on Elementary School. The research objective is to analyze the full breakfast at the elementary school students in District Rasau Jaya covering aspects of the type, quantity and quality of the breakfast. This research is an analytic with Cross sectional study design. Subjects were students at SDN 1 Rasau Jaya aged 8-12 years, a large sample of 215 respondents. The results showed that as many as 98.6% of students breakfasts with ten types of food most consumed by children during breakfast ie eggs, white rice, fried rice, yellow rice, tempeh, bulb meatballs, dumplings, bread, sausages and porridge. While the five types of beverage most consumed by children during breakfast was tea, milk, juice, water, and syrup. 54% of the number of good energy, 51% protein and 68.4% fat in both categories. 61.9% carbohydrate intake is not good. The nutritional quality of food is quite good kid. Abstrak : Analisis Jenis, Jumlah Dan Mutu Sarapan Pagi Siswa Sekolah Dasar. Tujuan penelitian yaitu untuk menganalisis sarapan pagi pada siswa Sekolah Dasar di Kecamatan Rasau Jaya meliputi aspek jenis, jumlah dan mutu sarapan. Penelitian ini bersifat analitik dengan desain penelitian Cross sectional. Subjek penelitian adalah siswa SDN 1 Rasau Jaya usia 8-12 tahun, besar sampel penelitian sebanyak 215 responden. Hasil penelitian menunjukkan bahwa sebanyak 98,6 % siswa sarapan dengan sepuluh jenis makanan yang paling banyak dikonsumsi oleh anak selama sarapan yaitu telur ayam, nasi putih, nasi goreng, nasi kuning, tempe, pentol bakso, siomay, roti, sosis, dan bubur. Sedangkan lima jenis minuman yang paling banyak dikonsumsi oleh anak selama sarapan adalah teh, susu, air jeruk, air putih, dan sirup. Sebanyak 54% jumlah energi baik, protein 51 % dan lemak 68,4% pada kategori baik. 61,9% asupan karbohidrat tidak baik. Mutu gizi pangan anak tergolong baik.

  14. ANALISIS STILISTIKA WACANA TERJEMAHAN RESMI NASKAH PRASASTI PLUMPUNGAN (KAJIAN HISTORIS

    Directory of Open Access Journals (Sweden)

    Hristina Nikolic

    2008-12-01

    Full Text Available This article mainly deals with the Plumpungan manuscript discourse, an ancient stone inscription found in the Salatiga area. The manuscript dates back to the 8th century and is one of the main historical sources of the Salatiga municipality. There is a tight connection involving the above mentioned inscription with the legitimacy of the Javanese court at that time, as well as with the monarch, who was seen as half- man, half-deity. The monarch drew on the labor of his subjects in maintaining reli- gious sites to ensure his place on earth, and in heaven. The Plumpungan manuscript was a ‘legal document’ used to reassure inhabitants of the area that the monarch is the legitimate ruler, and to prevent further revolt. The monarch’s subjects in the Salatiga area at the time were farmers disheartened with high taxes and the fear of volcanic eruptions, which later caused great migrations to East Java. Consequently, the mon- arch, using the Plumpungan manuscript as a medium, decreed that the Hampra vil- lage (present-day Salatiga become a tax-free area due to the excellent care that its citizens provided for the religious sites, in addition to the obeisance shown to the monarch. It becomes clear, however, that all the way through the discourse analysis, the king wanted to ensure his legitimacy. Socio-historical context confirms that the monarch, Bhanu, was a successful ruler who held power over four regions, analogi- cally with Indra, the king of all deities. Discourse analysis is detained under three main dimensions, which is grammatical, lexical and contextual, unified from be- ginning to end in a particular style that reveals genuinely hidden meaning.     Key words: manuscript, Plumpungan, kodikologi, dan analisis stilistika.

  15. KONDISI CURAH HUJAN PADA KEJADIAN BANJIR JAKARTA DAN ANALISIS KONDISI UDARA ATAS WILAYAH JAKARTA BULAN JANUARI – FEBRUARI 2013

    OpenAIRE

    Syaifullah, M. Djazim

    2018-01-01

    IntisariKondisi curah hujan di wilayah Jakarta pada kejadian banjir besar tanggal 17 Januari 2013 telah dianalisis yang dihubungkan dengan kondisi atmosfer pada selang waktu tersebut. Data curah hujan menggunakan data TRMM sedangkan analisis kondisi atmosfer menggunakan data rawinsonde. Hasil analisis menunjukkan bahwa puncak kejadian banjir Jakarta musim hujan tahun 2013 terjadi pada tanggal 17 Januari 2013 disebabkan oleh faktor lokal yang sangat kuat ditambah dengan faktor global yang mend...

  16. Nuclear reactors

    International Nuclear Information System (INIS)

    Prescott, R.F.; George, B.V.; Baglin, C.J.

    1979-01-01

    In a nuclear reactor (e.g. one having coolant down-flow through a core to a hearth below) thermal insulation (e.g. of a floor of the hearth) comprises a layer of bricks and a layer of tiles thereon, with smaller clearances between the tiles than between the bricks but with the bricks being of reduced cross-section immediately adjacent the tiles so as to be surrounded by interconnected passages, of relatively large dimensions, constituting a continuous chamber extending behind the layer of tiles. By this arrangement, lateral coolant flow in the inter-brick clearances is much reduced. The reactor core is preferably formed of hexagonal columns, supported on diamond-shaped plates each supported on a pillar resting on one of the hearth-floor tiles. Each plate has an internal duct, four upper channels connecting the duct with coolant ducts in four core columns supported by the plate, and lower channels connecting the duct to a downwardly-open recess common to three plates, grouped to form a hexagon, at their mutually-adjacent corners. This provides mixing, and temperature-averaging, of coolant from twelve columns

  17. Reactor container

    International Nuclear Information System (INIS)

    Oikawa, Hirohide; Otonari, Jun-ichiro; Tozaki, Yuka.

    1993-01-01

    Partition walls are disposed between a reactor pressure vessel and a suppression chamber to separate a dry well to an upper portion and a lower portion. A communication pipe is disposed to the partition walls. One end of the communication pipe is opened in an upper portion of the dry well at a position higher than a hole disposed to a bent tube of the suppression chamber. When coolants overflow from a depressurization valve by an erroneous operation of an emergency reactor core cooling device, the coolants accumulate in the upper portion of the dry well. When the pipeline is ruptured at the upper portion of the pressure vessel, only the inside of the pressure vessel and the upper portion of the dry well are submerged in water. In this case, the water level of the coolants does not elevate to the opening of the commuication pipe but they flow into the suppression chamber from the hole disposed to the bent tube. Since the coolants do not flow out to the lower portion of the dry well, important equipments such as control rod drives disposed at the lower portion of the dry wall can be prevented from submerging in water. (I.N.)

  18. Reactor monitor

    International Nuclear Information System (INIS)

    Takada, Tamotsu.

    1992-01-01

    The device of the present invention monitors a reactor so that each of the operations for the relocation of fuel assemblies and the withdrawal and the insertion of control rods upon exchange of fuel assemblies and control rods in the reactor. That is, when an operator conducts relocating operation by way of a fuel assembly operation section, the device of the present invention judges whether the operation indication is adequate or not, based on the information of control rod arrangement in a control rod memory section. When the operation indication is wrong, a stop signal is sent to a fuel assembly relocating device. Further, when the operator conducts control rod operation by way of a control rod operation section, the device of the present invention judges in the control rod withdrawal judging section, as to whether the operation indication given by the operator is adequate or not by comparing it with fuel assembly arrangement information. When the operation indication is wrong, a stop signal is sent to control rod drives. With such procedures, increase of nuclear heating upon occurrence of erroneous operation can be prevented. (I.S.)

  19. Nuclear reactors

    International Nuclear Information System (INIS)

    Matheson, J.E.

    1983-01-01

    A nuclear reactor has an upper and a lower grid plate. Protrusions project from the upper grid plate. Fuel assemblies having end fittings fit between the grid plates. An arrangement is provided for accepting axial forces generated during the operation of the nuclear reactor by the flow of the cooling medium and thermal expansion and irradiation-induced growth of the fuel assembly, which comprises rods. Each fuel assembly rests on the lower grid plate and its upper end is elastically supported against the upper grid plate by the above-mentioned arrangement. The arrangement comprises four (for example) torsion springs each having a torsion tube and a torsion bar nested within the torsion tube and connected at one end thereto. The other end of the torsion bar is connected to an associated one of four lever arms. The torsion tube is rigidly connected to the other end fitting and the springs are disposed such that the lever arms are biassed against the protrusions. (author)

  20. Analisis Spasial Kejadian Filariasi di Kabupaten Demak Jawa Tengah

    Directory of Open Access Journals (Sweden)

    Nurjazuli Nurjazuli

    2018-04-01

    Full Text Available Latar Belakang: Filariasis merupakan salah satu penyakit tular vektor yang kurang mendapatkan perhatian, termasuk kelompok Neglected Tropical Diseases (NTDs. Kabupaten Demak merupakan salah satu wilayah di Propinsi Jawa Tengah  yang merupakan daerah endemis filarisis (mf rate>1%. Kejadian filarisis di daerah ini diduga berkaitan dengan kondisi lingkungan fisik dan biologis (nyamuk yang mempunyai peran penting dalam penyebaran penyakit filarisis. Penelitian ini bertujuan untuk menemukan adanya penderita baru,  mengidentifikasi kondisi lingkungan fisik dan biologi yang berkaitan dengan sebaran filarisis di Kabupaten Demak. Matede: Penelitian ini merupakan penelitian observasional dengan rancangan cross-sectional. Sebanyak 30 kasus filariasis dijadikan indek kasus yang selanjutnya dipilih secara purposif sebanyak 140 yang tinggal di sekitar 30 kasus tersebut untuk dilakukan pengamblan darah jari. Observasi lingkungan dilakukan untuk mengidentifikasi kondisi lingkungan (breeding places dan resting places dari yang diduga sebagai nyamuk vektor filariasis. Penangkapan nyamuk dilakukan di sekitar rumah penderita filariasis. Pengukuran koordinat kasus filariais dilakukan dengan pesawat Geographic Positioning System (GPS. Pemeriksaan darah jadi jari dilakukan di Laboratorium Kesehatan Daerah (LABKESDA Propinsi Jawa Tengah. Sedang bedah nyamuk dilakukan di Balai Penelitian Vektor Penyakit Banjarnegara. Analisis data dlakukan secara deskriptif, analisis spasial dilakukan dengan software ArcGis 9.3. Hasil: Penelitian ini tidak menemukan penderita baru filarisis (mf rate=0%. Sebanyak 129 ekor nyamuk telah dilakukan pembedahan dengan hasil semuanya negatip cacing filaria. Hasil identifikasi nyamuk menemukan spesies nyamuk Culex quinquefasciatus merupakan nyamuk yang dominan (72,86% di lokasi penelitian.Terdapat breeding places (40% berupa genangan air terbuka (SPAL dan resting places (83,3% berupa semak-semak di sekitar rumah penderita. Analisis spasial

  1. An Analysis of the Thermal and Structure Behaviour of the UO{sub 2}-PuO{sub 2}-Fuel in the Irradiation Experiment of the UO{sub 2}-PuO{sub 2}-Fuel in the Irradiation Experiment FR2 Capsule Test Series 5a; Analisis termico y estructural del combustible UO{sub 2}-PuO{sub 2} irradiado en el reactor FR2 dentro del experimento KVE-Vg.5a

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Jimenez, J.; Helmut, E.

    1981-07-01

    In the Karlsruhe research reactor FR2 nine fuel pins were irradiated within three irradiation capsules in the course of the test series 5a. The pins contained UO{sub 2}-PuO{sub 2} fuel pellets. They reached bump values of about 6, 17 and 47 Mwd/Kg Me with linear rod powers of 400 to 600 W/cm and clad surface temperature between 500 and 700 degree centigree. A detailed analysis of the fuel structuration data (columnar-grain and equiaxed- -grain growth regions) have allowed to determine, with the help of physic-mathematical models, the radii of these regions and the heat transfer through the contact zone between fuel and clad depending on the bump. The results of the analysis showed that the fuel surface temperature rose with increasing burnup. (Author) 16 refs.

  2. Reactor core fuel management

    International Nuclear Information System (INIS)

    Silvennoinen, P.

    1976-01-01

    The subject is covered in chapters, entitled: concepts of reactor physics; neutron diffusion; core heat transfer; reactivity; reactor operation; variables of core management; computer code modules; alternative reactor concepts; methods of optimization; general system aspects. (U.K.)

  3. Hybrid adsorptive membrane reactor

    Science.gov (United States)

    Tsotsis, Theodore T [Huntington Beach, CA; Sahimi, Muhammad [Altadena, CA; Fayyaz-Najafi, Babak [Richmond, CA; Harale, Aadesh [Los Angeles, CA; Park, Byoung-Gi [Yeosu, KR; Liu, Paul K. T. [Lafayette Hill, PA

    2011-03-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  4. Reactor outage schedule (tentative)

    Energy Technology Data Exchange (ETDEWEB)

    Walton, R.P.

    1969-11-01

    This single page document is the November 1, 1969 reactor refueling outage schedule for the Hanford Production Reactor. It also contains data on the amounts and types of fuels to be loaded and relocated in the production reactor.

  5. Reactor outage schedule (tentative)

    Energy Technology Data Exchange (ETDEWEB)

    Walton, R.P.

    1969-10-01

    This single page document is the October 1, 1969 reactor refueling outage schedule for the Hanford Production Reactor. It also contains data on the amounts and types of fuels to be loaded and relocated in the Production Reactor.

  6. Reactor outage schedule (tentative)

    Energy Technology Data Exchange (ETDEWEB)

    Walton, R.P.

    1969-10-15

    This single page document is the October 15, 1969 reactor refueling outage schedule for the Hanford Production Reactor. It also contains data on the amounts and types of fuels to be loaded and relocated in the Production Reactor.

  7. Reactor outage schedule (tentative)

    Energy Technology Data Exchange (ETDEWEB)

    Walton, R.P.

    1969-09-15

    This single page document is the September 15, 1969 reactor refueling outage schedule for the Hanford Production Reactor. It also contains data on the amounts and types of fuels to be loaded and relocated in the Production Reactor.

  8. Reactor outage schedule (tentative)

    Energy Technology Data Exchange (ETDEWEB)

    Walton, R.P.

    1969-12-15

    This single page document is the December 16, 1969 reactor refueling outage schedule for the Hanford Production Reactor. It also contains data on the amounts and types of fuels to be loaded and relocated in the Production reactor.

  9. Reactor outage schedule (tentative)

    Energy Technology Data Exchange (ETDEWEB)

    Walton, R.P.

    1969-12-01

    This single page document is the December 1, 1969 reactor refueling outage schedule for the Hanford Production Reactor. It also contains data on the amounts and types of fuels to be loaded and relocated in the Production reactor.

  10. Reactor theory and power reactors. 1. Calculational methods for reactors. 2. Reactor kinetics

    International Nuclear Information System (INIS)

    Henry, A.F.

    1980-01-01

    Various methods for calculation of neutron flux in power reactors are discussed. Some mathematical models used to describe transients in nuclear reactors and techniques for the reactor kinetics' relevant equations solution are also presented

  11. The CEA research reactors

    International Nuclear Information System (INIS)

    Schwartz, J.P.

    1993-01-01

    Two main research reactors, specifically designed, PEGASE reactor and Laue-Langevin high flux reactor, are presented. The PEGASE reactor was designed at the end of the 50s for the study of the gas cooled reactor fuel element behaviour under irradiation; the HFR reactor, was designed in the late 60s to serve as a high yield and high level neutron source. Historical backgrounds, core and fuel characteristics and design, flux characteristics, etc., are presented. 5 figs

  12. Atomic reactor thermal engineering

    International Nuclear Information System (INIS)

    Kim, Gwang Ryong

    1983-02-01

    This book starts the introduction of atomic reactor thermal engineering including atomic reaction, chemical reaction, nuclear reaction neutron energy and soon. It explains heat transfer, heat production in the atomic reactor, heat transfer of fuel element in atomic reactor, heat transfer and flow of cooler, thermal design of atomic reactor, design of thermodynamics of atomic reactor and various. This deals with the basic knowledge of thermal engineering for atomic reactor.

  13. Nuclear reactor types

    International Nuclear Information System (INIS)

    Jones, P.M.S.

    1987-01-01

    The characteristics of different reactor types designed to exploit controlled fission reactions are explained. Reactors vary from low power research devices to high power devices especially designed to produce heat, either for direct use or to produce steam to drive turbines to generate electricity or propel ships. A general outline of basic reactors (thermal and fast) is given and then the different designs considered. The first are gas cooled, including the Magnox reactors (a list of UK Magnox stations and reactor performance is given), advanced gas cooled reactors (a list of UK AGRs is given) and the high temperature reactor. Light water cooled reactors (pressurized water [PWR] and boiling water [BWR] reactors) are considered next. Heavy water reactors are explained and listed. The pressurized heavy water reactors (including CANDU type reactors), boiling light water, steam generating heavy water reactors and gas cooled heavy water reactors all come into this category. Fast reactors (liquid metal fast breeder reactors and gas cooled fast reactors) and then water-cooled graphite-moderated reactors (RBMK) (the type at Chernobyl-4) are discussed. (U.K.)

  14. Estudio preliminar. Patologías digitales más frecuentes en el pie de la bailaora de flamencoe

    Directory of Open Access Journals (Sweden)

    José Manuel Castillo López

    2010-05-01

    Full Text Available Este estudio tiene como objetivos, en primer lugar, dar a conocer las principales deformidades digitales de los pies, asociadas -por su alta incidencia- a la práctica profesional del baile flamenco femenino. Así como, poner de manifiesto la necesidad de llevar a cabo estudios de mayor magnitud para determinar si existe una relación estadísticamente significativa entre la práctica del baile flamenco con las deformidades y patologías podológicas descritas, y la importancia de la investigación en el campo de la medicina del deporte, y de la ortopodología y biomecánica en pos de hallar tratamientos preventivos y/o paliativos en su caso.En este estudio epidemiológico preliminar, llevado a cabo con la colaboración de la Universidad de Sevilla-Área Clínica de Podología y Departamento de Podología- Agencia Andaluza para el Desarrollo del Flamenco, Fundación Cristina Heeren de Arte Flamenco, Centro de Baile Flamenco Ana Moya, y el Centro de Investigación de Flamenco Telethusa, se han evaluado a 28 bailaoras profesionales activas en la provincia de Sevilla, con una actividad mínima de 20h semanales. En dicha muestra se han determinado las patologías podológicas presentes, sintomatología, hábitos de uso de calzado específico, y hábitos podológicos. Los resultados muestran una alta incidencia de patologías digitales como el H.A.V. (juanetes, dedos en garra, y onicopatías.

  15. Análisis factorial confirmatorio de la Escala de Estilos de Crianza de Steinberg: validez preliminar de constructo

    Directory of Open Access Journals (Sweden)

    César Merino Soto

    2013-09-01

    Full Text Available Se estudió la validez de constructo y confiabilidad interna de la Escala de Estilos de Crianza de L. Steinberg que se administró a una muestra de 224 adolescentes entre 11 y 19 años de un colegio público en Lima. Mediante el análisis factorial confirmatorio de grupo múltiple, la estructura de tres subescalas (Compromiso, Autonomía Psicológica y Control Conductual/Supervisión se mantuvo en general estable, aunque la agrupación teórica de los ítems tendió a estar influenciada por la distribución de los ítems. La confiabilidad alfa para las subescalas solo alcanzó niveles marginales de aceptación y se reconoció el probable impacto del error de medición aleatorio. Los resultados muestran que el instrumento utilizado es una herramienta potencial para la investigación, pero estos hallazgos son preliminares y se requieren estudios adicionales para evaluar la generalización del análisis efectuado. The present study tried to find evidences of construct validity and internal reliability for the Parenting Styles Scale of L. Steinberg. The instrument was applied in a sample of 224 adolescents from 11 to 19 years old from a public school of Lima. With a strategy of multiple group confirmatory factor analysis, the three-subscale structure (Commitment, Psychological Autonomy and Behavior Control/Supervision was in general stable, although the theoretical grouping of the items was influenced by the distribution of the item. The alpha reliability reached marginal levels and the probable impact of the random error was recognized. Results show that this instrument is a potential tool for research, but these findings are preliminary and additional studies are required to evaluate the generalization of the analysis.

  16. Eficacia de una solución de polietilenglicol en la preparación del colon: Estudio preliminar

    Directory of Open Access Journals (Sweden)

    Marta Amarilys Vasallo Sellek

    2002-04-01

    Full Text Available Se realizó un estudio preliminar con 50 pacientes que acudieron a la Consulta de Coloproctología del Hospital Universitario "General Calixto García" para cirugía electiva de colon por diversos motivos. La muestra se dividió en 2 grupos: uno se preparó con solución de manitol 0,1 % y el otro con solución de polietilenglicol (PEG. Se compararon ambos grupos según la edad y el sexo, sin que se encontraran diferencias significativas entre ellos. Fue estadísticamente significativo el número de pacientes normales en el preoperatorio y bien preparados en el transoperatorio para el grupo que se preparó con solución de PEG (pA preliminary study was conducted with 50 patients that were seen at the Coloproctology Consulting Room of "General Calixto García" Teaching Hospital to undergo selective colon surgery due to different reasons. The sample was divided into 2 groups: one was prepared with mannitol solution 0.1 % and the other with polyethylene glycol (PEG solution. Both groups were compared as regards age and sex and no significant differences were found between them. The number of normal patients in the preoperative and of well prepared in the transoperative was statistically significant in the group that received PEG solution (p<0.05. The adverse effects and the complications predominated in the group prepared with mannitol solution 0.1 %. The intestinal transit was reestablished faster in the group that was administered PEG. The use of PEG solution is recommended for colon preparation.

  17. Inventario preliminar de las especies de la familia Orquidaceae en La Vereda La Granja del municipio de Sasaima, Cundinamarca, Colombia

    Directory of Open Access Journals (Sweden)

    Juan Camilo Ordóñez B.

    2005-07-01

    Full Text Available La familia Orquidaceae tiene la mayor diversidad del reino vegetal, presenta variaciones en cuanto al hábitat, floración, polinización, entre otros aspectos. Colombia registra aproximadamente 3.500 especies en 250 géneros, representando el 10% de la diversidad de la vegetación mundial. Este trabajo presenta un inventario preliminar, sobre las orquidáceas de la Vereda “La Granja” del municipio de Sasaima, Cundinamarca, Colombia. El muestreo se realizó en transectos desde la zona urbana municipal, por la carretera que conduce al municipio de la Vega, hasta “La Ye” ubicada a 500 m del río Gualiva, abarcando un total de 10 km. El trabajo en campo incluyó una ficha morfotaxonómica de caracterización, destacando: descripción del hábitat y especie, condiciones ambientales, épocas de floración, abundancia y huéspedes en caso de epifitismos. La identificación de géneros se basó en las claves de Gentry y Valdivieso, y la de especies se hizo por comparación de muestras y fotografías con la publicación de Villegas. Se registraron 41 especies agrupadas en 27 géneros, de estos se destaca Epidendrum. El 56% de las especies son poco comunes, y solo el 7,3% muy abundantes. El hábitat más común es el Epífito. La época de mayor floración se encuentra entre abril-marzo.

  18. Calculo Preliminar de la Tasa de Meteorización del Batolito Antioqueño, Cordillera Central, Colombia

    Directory of Open Access Journals (Sweden)

    Carolina Garcia

    2004-12-01

    Full Text Available Este trabajo es una estimación preliminar del tiempo necesario para generar la espesa capa de saprolito que caracteriza el perfil de meteorización actual de un batolito cuarzodiorítico cretácico que aflora en altiplanos de la Cordillera Central de Colombia, entre 5º50' y 7º00' de latitud Norte y 74º50' y 75º35' de longitud Oeste y a alturas entre 750 y 2700 m.Se utilizan datos obtenidos previamente mediante el análisis de la composición química de las aguas superficiales de cuatro cuencas con áreas diferentes, ubicadas sobre el Batolito Antioqueño, al este de Medellín. Los cáculos se hicieron con el método basado en la pérdida de componentes en solución utilizando diferentes valores de solutos. Al utilizar la pérdida de sílice se obtiene un tiempo de meteorización de unos 6 x 10 6 años, comparable con el obtenido mediante la datación de las cenizas volcánicas mas antiguas que recubren la topografía actual y que indican la fecha mínima de configuración de la superficie de erosión.A pesar de resultar de una serie de suposiciones simplificadoras, este resultado es interesante y justifica la realización de determinaciones mas detalladas. Confirma la larga preservación de superficies de erosión antiguas conformadas sobre un saprolito que desde hace varios millones de años no ha sido sometido a una erosión profunda, fenómeno poco común en una zona tectónicamente activa como la estudiada.

  19. Los exámenes preliminares de la Corte Penal Internacional en América Latina: el caso colombiano y su impacto sobre futuras negociaciones de paz en la región

    Directory of Open Access Journals (Sweden)

    Héctor Olásolo Alonso

    2014-06-01

    Full Text Available El artículo comienza analizando la función de la Fiscalía de la Corte Penal Internacional en la aplicación del principio de complementariedad, a través de los exámenes preliminares realizados durante los diez primeros años de funcionamiento de la Corte Penal Internacional. Se subraya la relevancia de los exámenes preliminares para fortalecer los órganos jurisdiccionales nacionales y el Estado de Derecho en los Estados afectados, y se constata que cada situación bajo examen requiere de una estrategia de actuación diferente debido a las particulares circunstancias que la rodean. A continuación, se analizan las características del fenómeno de la lesa humanidad en Colombia y las consecuencias de su configuración como crímenes internacionales de ius cogens. A la luz de lo anterior, se aborda el impacto del examen preliminar que la Fiscalía de la CPI viene desarrollando sobre la situación de Colombia para las actuales negociaciones de paz entre el Gobierno y las FARC. Para finalizar, el autor realiza algunas observaciones finales sobre la importancia de este examen preliminar más allá de Colombia para futuras negociaciones de paz en la región.

  20. Reactor safety

    International Nuclear Information System (INIS)

    Meneley, D.A.

    The people of Ontario have begun to receive the benefits of a low cost, assured supply of electrical energy from CANDU nuclear stations. This indigenous energy source also has excellent safety characteristics. Safety has been one of the central themes of the CANDU development program from its very beginning. A great deal of work has been done to establish that public risks are small. However, safety design criteria are now undergoing extensive review, with a real prospect of more stringent requirements being applied in the future. Considering the newness of the technology it is not surprising that a consensus does not yet exist; this makes it imperative to discuss the issues. It is time to examine the policies and practice of reactor safety management in Canada to decide whether or not further restrictions are justified in the light of current knowledge

  1. Nuclear reactor

    International Nuclear Information System (INIS)

    Schabert, H.P.; Weber, R.; Bauer, A.

    1975-01-01

    The refuelling of a PWR power reactor of about 1,200 MWe is performed by a transport pipe in the containment leading from an external to an internal fuel pit. A wagon to transport the fuel elements can go from a vertical loading position to an also vertical deloading position in the inner fuel pit via guide rollers. The necessary horizontal movement is effected by means of a cable line through the transport pipe which is inclined at least 10 0 . Gravity thus helps in the movement to the deloading position. The cable line with winch is fastened outside the containment. Swivelling devices tip the wagon from the horizontal to the vertical position or vice versa. Loading and deloading are done laterally. (TK/LH) [de

  2. Nuclear reactor

    International Nuclear Information System (INIS)

    Schweiger, F.; Glahe, E.

    1976-01-01

    In a nuclear reactor of the kind which is charged with spherical reaction elements and in which control rods are arranged to be thrust directly into the charge, each control rod has at least one screw thread on its external surface so that as the rod is thrust into the charge it is caused to rotate and thus make penetration easier. The length of each control rod may have two distinct portions, a latter portion which carries a screw thread and a lead-in portion which is shorter than the latter portion and which may carry a thread of greater pitch than that on the latter portion or may have a number of axially extending ribs instead of a thread

  3. Reactor container

    International Nuclear Information System (INIS)

    Furukawa, Hideyasu; Oyamada, Osamu; Uozumi, Hiroto.

    1976-01-01

    Purpose: To provide a container for a reactor provided with a pressure suppressing chamber pool which can prevent bubble vibrating load, particularly negative pressure generated at the time of starting to release exhaust from a main steam escape-safety valve from being transmitted to a lower liner plate of the container. Constitution: This arrangement is characterized in that a safety valve exhaust pool for main steam escape, in which a pressure suppressing chamber pool is separated and intercepted from pool water in the pressure suppressing chamber pool, a safety valve exhaust pipe is open into said safety valve exhaust pool, and an isolator member, which isolates the bottom liner plate in the pressure suppressing chamber pool from the pool water, is disposed on the bottom of the safety valve exhaust pool. (Nakamura, S.)

  4. Nuclear reactors

    International Nuclear Information System (INIS)

    Prescott, R.F.

    1976-01-01

    In the system described the fuel elements are arranged vertically in groups and are supported in such a manner as to tend to tilt them towards the center of the respective group, the fuel elements being urged laterally into abutment with one another. The elements have interlocking bearing pads, whereby lateral movement of adjacent elements is resisted; this improves the stability of the reactor core during refuelling operations. Fuel elements may comprise clusters of parallel fuel pins enclosed in a wrapper of hexagonal cross section, with bearing pads in the form of spline-like ribs located on each side of the wrapper and extending parallel to the longitudinal axis of the fuel element, being interlockable with ribs on pads of adjacent fuel elements. The arrangement is applicable to a reactor core in which fuel elements and control rod guide tubes are arranged in modules each of which comprises a cluster of at least three fuel elements, one of which is rigidly supported whilst the others are resiliently tilted towards the center of the cluster so as to lean on the rigidly supported element. It is also applicable to modules comprising a cluster of six fuel elements, each resiliently tilted towards a central void to form a circular arch. The modules may include additional fuel elements located outside the clusters and also resiliently tilted towards the central voids, the latter being used to accommodate control rod guide tubes. The need for separate structural members to act as leaning posts is thus avoided. Such structural members are liable to irradiation embrittlement, that could lead to core failure. (U.K.)

  5. Nuclear reactor neutron shielding

    Science.gov (United States)

    Speaker, Daniel P; Neeley, Gary W; Inman, James B

    2017-09-12

    A nuclear reactor includes a reactor pressure vessel and a nuclear reactor core comprising fissile material disposed in a lower portion of the reactor pressure vessel. The lower portion of the reactor pressure vessel is disposed in a reactor cavity. An annular neutron stop is located at an elevation above the uppermost elevation of the nuclear reactor core. The annular neutron stop comprises neutron absorbing material filling an annular gap between the reactor pressure vessel and the wall of the reactor cavity. The annular neutron stop may comprise an outer neutron stop ring attached to the wall of the reactor cavity, and an inner neutron stop ring attached to the reactor pressure vessel. An excore instrument guide tube penetrates through the annular neutron stop, and a neutron plug comprising neutron absorbing material is disposed in the tube at the penetration through the neutron stop.

  6. Humanidades digitales: la censura y los laudatorios en las preliminares del Siglo de Oro español; Madrid y Guzmán de Alfarache

    Directory of Open Access Journals (Sweden)

    Witton Becerra Mayorga

    2016-01-01

    Full Text Available Este artículo presenta los resultados del estudio de la censura y los laudatorios en algunas preliminares de la literatura del Siglo de Oro español. Fue realizado con la metodología de “ queries ” en la plataforma Sylvadb del Laboratorio Culturplex. El traba - jo se divide en cuatro partes: introducción, donde se definen los elementos teóricos desde los cuales se aborda la investigación; metodología, en la que se tratan los pasos de la investigación desde la lectura, la elaboración de la base de datos, las consultas ( searchs y preguntas ( queries ; resultados, en los cuales se indican los resultados obtenidos de la investigación, y por último están las conclusiones, que señalan dos asuntos que aportan nuevas propuestas al campo de los estudios literarios respecto a las humanidades digitales y al trabajo sobre las preliminares.

  7. Analisis Perencanaan dan Penganggaran Pada Dinas Pendidikan Provinsi Jambi

    Directory of Open Access Journals (Sweden)

    Meri Darlina

    2016-06-01

    Full Text Available Abstract This research tried to investigate the analysis of consistency between planning and budgeting in education departement of Jambi Province year 2011 to 2015 which viewed by the planning and budgeting document of education in Jambi Province such as; RPJMD year 2010-2015, Renstra year 2010-2015, RKPD yaer 2011-2015, Renja year 2011-2015, PPAS year 2011-2015, RKA year 2011-2015, and DPA of APBD Education department year 2011-2015. The result of the analysis continuosly was analyzed by using Matrik of Planning and Budgeting Consolidation (MKPP for investigate level of consistency that occur and analyzed what kind of factors which caused inconsistency and what kind of effort has been done to create consistency between planning and budgeting.             The result showed level of planning and budgeting consistency between document of planning and budgeting still low. The highest consistency available in PPAS document and APBD document. The cause of inconsistency is leader policy, human resources limitedness, less coordination between sub-department and SKPD, high frequency of leader commutation and goverment’s role changing. Efforts are being made to achieve consistency between planning and budgeting is the functional improvement of human resource planning, improved coordination between field and education and the establishment of an electronic planning system (E-Planning. Keyword : Consistency, Planning, Budgeting, Education, Region Goverment   Abstrak. Penelitian ini bertujuan untuk menganalisis konsistensi antara perencanaan dan penganggaran pada Dinas Pendidikan Provinsi Jambi Tahun 2011-2015 yang dilihat dari dokumen perencanaan dan pengaggaran pendidikan di Provinsi Jambi seperti RPJMD Tahun 2010-2015, Renstra Tahun 2010-2015, RKPD Tahun 2011-2015, Renja 2011-2015, PPAS Tahun 2011-2015, RKA Tahun 2011-2015, dan DPA Dinas Pendidikan APBD Tahun 2011-2015.Hasil analisa tersebut selanjutnya di analisis dengan menggunakan Matrik

  8. Analisis Sikap Pengguna Paytren Menggunakan Technology Acceptance Model

    Directory of Open Access Journals (Sweden)

    Moh Siri

    2017-04-01

    Full Text Available Abstrak Semakin pesatnya aplikasi berbasis android mendorong masyarakat beralih dan menggunakan. Melakukan transaksi dan pembayaran ke loket-loket Paymen Point Online Bank (BPOB yang dirasa kurang membantu masyarakat dalam kegiatan transkasi. Oleh karenanya hadir sebuah layanan terknologi dibidang micropayment dengan perangkat lunak bernama PayTren yang dapat digunakan untuk pembayaran transaksi dalam jumlah kecil  (micropayment berbasis android yang merupakan salah satu alternatif tepat dan bermanfaat untuk sarana mempermudah pengguna dalam melakukan transaksi atau pembayaran serta mampu menggeser jenis pembayaran pada loket-loket pembayaran pada umumnya. Tujuan dalam penelitian ini adalah untuk menganalisis sikap pengguna aplikasi PayTren berbasis android dengan menggunakan metode Technology Acceptance Model (TAM, serta pengujian menggunakan analisis regresi. Manfaat penelitian ini adalah sebagai referensi untuk penelitian selanjutnya dengan menggunakan metode TAM dan ditambahkan variabel yang lain. Hasil dari penelitian ini persepsi kegunaan (perceived usefullness dan persepi kemudahan (perceived easy of use memiliki pengaruh yang dikategorikan kuat dan lemah terhadap (attitude toward using sikap pengguna. Kata Kunci: Aplikasi, Android, PayTren, Technology Acceptance Model.                                                                                                                             Abstract The more rapid the android-based applications are pushing the community move on and use. Transaction and payment to the counter-the counter of Paymen Point Online Bank (BPOB where less help the community in dealings. Therefore present a terknologi service in the field of micropayment with software called PayTren that can be used for payment transactions in small amounts (micropayment android-based which is one of the alternatives is right and beneficial for the means of

  9. ANALISIS PARITAS DAYA BELI KURS RUPIAH TERHADAP DOLLAR AMERIKA SERIKAT

    Directory of Open Access Journals (Sweden)

    Elysa Pernika Simanjuntak

    2017-06-01

    Full Text Available Penelitian ini bertujuan untuk menganalisis bagaimana penerapan teori paritas daya beli kurs Rupiah terhadap Dollar AS dalam jangka panjang maupun jangka pendek dan pengaruh tingkat inflasi, produk domestik bruto, jumlah uang beredar, dan cadangan devisa terhadap kurs Rp/USD dengan menggunakan alat analisis Error Correction Model Engle-Granger. Variabel dependen dalam penelitian ini adalah kurs, sedangkan variabel independennya adalah inflasi, produk domesti bruto, jumlah uang beredar, dan cadangan devisa. Hasil penelitian ini menunjukkan bahwa dalam jangka panjang maupun jangka pendek, teori paritas daya beli berlaku pada kurs Rupiah terhadap Dollar Amerika Serikat. Variabel independen secara bersama-sama berpengaruh terhadap kurs Rupiah dalam jangka pendek maupun jangka panjang kecuali variabel jumlah uang beredar tidak berpengaruh dalam jangka panjang dan cadangan devisa tidak berpengaruh terhadap kurs dalam jangka pendek. Rekomendasi dari penelitian ini adalah Bank Indonesia selaku bank sentral Republik Indonesia diharapkan lebih berhati- hati dalam mengambil kebijakan yang tepat demi menjaga kestabilan nilai tukar Rupiah. Salah satunya tetap mengawasi kebijakan yang ditetapkan pemerintah mengenai pemakaian Rupiah untuk seluruh transaksi dalam negeri.  This research aims to analyze how the application of the theory of purchasing power parity exchange rate of the Rupiah against the US Dollar in the long term and short term and influence the rate of inflation, GDP, money supply, and the foreign exchange reserves of the exchange rate of Rp/USD by using analytical tools Error Correction Model Engle-Granger. Dependent variable in this study is the exchange rate, while the independent variables are inflation, gross domestic product, money supply, and the foreign exchange reserves. The results of this study indicated that in the long term and short term, the theory of purchasing power parity exchange rate prevailing at the Rupiah against the US

  10. ANALISIS HOMOGENITAS DATA CURAH HUJAN TAHUNAN KOTA MAKASSAR

    Directory of Open Access Journals (Sweden)

    Wahidah Sanusi

    2016-12-01

    Full Text Available Abstract. Homogeneity Analysis Of Annual Rainfall Data Of Makassar City. Testing the homogeneity of rainfall series is often required in climate and hydrology studies to ensure that rainfall data can be used reliability. The objective of this study is to identify homogeneity of annual rainfall data for three rainfall stations in Makassar for the period from 1985 to 2014. These stations are Paotere station, station of Biring Romang, and station of  BBMKG region IV. Four tests for homogeneity were applied for each station. These tests include the Standard Normal Homogeneity (SNH test, Buishand Range (BR test, Pettitt test and the von Neumann Ratio test. The SNH, BR, and Pettitt tests indicate that there was no break point for all station, except at Paotere station, Pettitt test shows that there was a break point in 1994. However, based on four homogeneity tests, the results reveal that rainfall series of Makassar city is homogeneous. The study results are usefull information for rainfall modeling of Makassar city.Abstrak. Analisis Homogenitas Data Curah Hujan Tahunan Kota Makassar. Pengujian homogenitas data runtun curah hujan sering diperlukan dalam kajian iklim dan hidrologi untuk menjamin kehandalan data yang digunakan. Tujuan penelitian ini adalah untuk mendeteksi kehomogenan data jumlah curah hujan tahunan di tiga stasiun hujan di kota Makassar dalam kurun waktu 1985 hingga 2014. Ketiga stasiun hujan tersebut adalah stasiun Paotere, stasiun Biring Romang, dan stasiun BBMKG wilayah IV. Ada empat uji homogenitas yang digunakan pada setiap stasiun, yaitu uji Standard Normal Homogeneity (SNH, uji Rentang Buishand (BR, uji Pettitt, dan uji Rasio von Neumann. Uji SNH, BR, dan Pettitt menunjukkan bahwa tidak terjadi perubahan jumlah curah hujan tahunan pada semua stasiun kajian, kecuali di stasiun Paotere, uji Pettitt menunjukan bahwa telah terjadi perubahan pada tahun 1994. Namun demikian, berdasarkan empat uji homogenitas tersebut menunjukkan

  11. Analisis Kesesuaian Kursi Pembatik Terhadap Kondisi Antropometri Pekerja Batik Tulis

    Directory of Open Access Journals (Sweden)

    Joni Setiawan

    2016-04-01

    Full Text Available ABSTRAKSejak diakuinya Batik sebagai warisan budaya tak benda oleh UNESCO, perkembangan industri batik mengalami perkembangan seiring dengan peningkatan permintaan pasar. Pada saat ini peralatan utama untuk membatik (kursi, gawangan, canting, kompor, meja cap, canting cap, wajan cap, dan lain-lain masih menggunakan peralatan batik yang lama, yang belum diteliti mengenai usability dan safety-nya. Tujuan dari penelitian ini adalah untuk mengkaji ukuran kursi dan gawangan pembatikan yang beredar di pasaran apakah telah sesuai dengan kebutuhan pembatik dan sesuai dengan konsep ergonomi. Pengumpulan data kursi dan gawangan dari berbagai tempat industri batik. Data yang diperlukan diwakili oleh N = 30 buah. Data-data ini kemudian dilakukan analisis statistik dengan metode histogram. Penggunaan kursi pembatikan di industri batik masih sangat jauh dari kondisi ideal (minimum tinggi 370 mm, lebar 380 mm dan kedalaman 380 mm. Ukuran tinggi kursi pembatik yang ada, rata-rata hanya berketinggian alas duduk 263,7 mm, lebar alas duduk 353 mm, kedalaman alas duduk 305 mm, dan tanpa menggunakan sandaran punggung.Kata kunci: kursi pembatikan, ergonomi, antropometriABSTRACTSince the approval of batik as an intangible cultural heritage by UNESCO, the improvement of batik industry have evolved along with the increase in market demand. At this time the main equipment for batik processes are still using the old batik equipment that has not been studied regarding its usability and safety. The purpose of this study was to assess the size of the seat and gawangan batik on the market whether in accordance with the requirements in accordance with the concept of batik and ergonomics. The data collected from several places batik industry. The data required to make is represented by N = 30 pieces. These data are then performed statistical analysis with the histogram method. The use of seat batik batik industry is still very far from ideal conditions. The size of the existing

  12. ANALISIS BANTUAN KREDIT TERHADAP PERKEMBANGAN KELOMPOK USAHA BERSAMA

    Directory of Open Access Journals (Sweden)

    Priyo Harsono

    2012-09-01

    Full Text Available The object of research is KUB Rukun Mina Barokah in Juwana, Pati. The purpose of research is to investigate the differences of KUB Rukun Mina Barokah development before and after getting the credit assistance from the Department of Marine and Fisheries, Pati in terms of capital, labor, thenumber of buyers, the total sales, and profits. The population for this research is 45 small micro enterprises. The type of data collected are primary and secondary data. The methods of data analysis are validity test, reliability test, and Wilcoxon sign rank test statistics. Based on the results of Wilcoxon sign rank test statistics which focuses on the variables of capital, labor, number of buyers, total sales and profit , it is obtained that p-value is 0.000 (0.000 <0,05. It shows that the credit assistance of the Department of Marine and Fisheries, Pati has given the changes in the joint venture group, Rukun Mina Barokah. The changes here means an increase in the variables before and after getting the credit assistance. Therefore, besides financial aid in the form of business loans, collaboration expansion is also needed to develop the business groups (KUB Objek dalam penelitian ini adalah KUB Rukun Mina Barokah di Kecamatan Juwana Kabupaten Pati. Tujuan penelitian ini untuk mengetahui perbedaan perkembangan KUB Rukun Mina Barokah sebelum dan sesudah mendapatkan bantuan kredit dari Dinas Kelautan dan Perikanan Kabupaten Pati ditinjau dari modal usaha, tenaga kerja, jumlah pembeli, total penjualan, dan keuntungan. Populasi penelitian sebanyak 45 usaha mikro kecil.Jenis datanya adalah data primer dan data sekunder.Metode analisis data meliputi uji validitas, uji reabilitas, dan uji statistic pangkat tanda wilcoxon.Berdasarkan hasil uji statistik pangkat tanda wilcoxon, baik variabel modal usaha, variabel tenaga kerja,variabel jumlah pembeli, variabel total penjualan maupun variabel keuntungan didapatkan nilai -p sebesar 0,000 (0,000 < 0,05. Hal itu

  13. Evaluasi dan Analisis Dampak Program Corporate Social Responsibility Badak LNG

    Directory of Open Access Journals (Sweden)

    Hanes Utama

    2017-08-01

    Full Text Available Program CSR Badak LNG telah melibatkan masyarakat dalam proses perencanaan, pelaksanaan, sampai pada proses monitoring dan evaluasi. Hal ini tentu berdampak pada peningkatan kualitas program serta meningkatkan peran partisipasi masyarakat sebagai kelompok sasaran penerima program CSR. Tujuan dari penelitian ini adalah mengukur tingkat kepuasan masyarakat terhadap program CSR yang telah dijalankan dan mengevaluasi dampak program CSR yang telah dilakukan. Adapun metode yang digunakan adalah  melalui pendekatan kajian input, output, outcome dan impact melalui analisis Indeks Kepuasan Masyarakat, Importance Performance Analysis, dan Compass Sustainability Analysis. Hasil penelitian menunjukkan secara keseluruhan kepuasan masyarakat terhadap pelayanan program CSR Badak LNG menunjukkan parameter sangat baik. Tingkat kesesuaian antara kepuasan kinerja dengan tingkat kepentingan masyarakat masuk dalam kategori sangat baik. Indikator kejelasan petugas pendamping,  tanggung jawab petugas pendamping, kemampuan petugas pendamping,  kesopanan petugas pendamping, dan kepastian biaya pelayanan adalah indikator yang memiliki harapan tinggi dari masyarakat penerima manfaat, dan perusahaan memiliki kinerja yang sangat baik dalam hal tersebut. Dampak positif yang diterima dari  kegiatan CSR pada dimensi nature, wellbeing, economy, social di Kota Bontang sangat tinggi, di antaranya terjadinya peningkatan kualitas lingkungan, pemanfaatan potensi alam, peningkatan pendapatan masyarakat, pengentasan kemiskinan, peningkatan kemandirian UMKM, semakin dikenalnya kebudayaan masyarakat, dan tingginya tingkat kepuasan masyarakat terhadap kegiatan-kegiatan CSR Badak LNG. The CSR program from Badak LNG has been involving the society in the planning, implementation, monitoring and evaluation process. It has an impact to the improvement quality program and increase peoples participation as a CSR awardee. This research aims to measure the peoples satisfactory towards CSR

  14. ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI IMPOR KAPAS DI INDONESIA

    Directory of Open Access Journals (Sweden)

    Ari Budi Basuki

    2017-06-01

    Full Text Available Penelitian ini bertujuan untuk menganalisis pengaruh produksi kapas domestik, konsumsi kapas, GDP riil dan kurs rupiah ke dollar AS terhadap impor kapas. Jenis penelitian ini adalah penelitian kuantitatif dengan data time series berdasarkan tahun 1980-2013. Data diperoleh dari Indexmundi, International Monetary Fund dan United Nations Conference on Trade and Development (UNSCAD. Hasil analisis Error Correction Model (ECM menunjukkan bahwa variabel produksi kapas domestik dalam jangka pendek dan jangka panjang tidak berpengaruh terhadap impor kapas, variabel konsumsi kapas dalam jangka pendek dan jangka panjang berpengaruh positif terhadap impor kapas, variabel GDP riil dalam jangka pendek dan jangka panjang tidak berpengaruh terhadap impor kapas, dan variabel kurs rupiah terhadap dollar dalam jangka pendek dan jangka panjang tidak berpengaruh terhadap impor kapas. Kesimpulan dari penelitian ini adalah faktor produksi kapas, GDP riil dan kurs dalam jangka pendek dan jangka panjang tidak berpengaruh terhadap impor kapas, namun dalam jangka pendek dan jangka panjang faktor konsumsi kapas mempengaruhi impor kapas. Saran yang berkaitan dengan hasil penelitian ini adalah Pemerintah perlu meningkatkan total produksi kapas dalam negeri dengan cara mengembangkan penelitian dan pembenihan kapas dalam negeri termasuk jenis transgenic. Pemerintah perlu mengurangi penggunaan kapas terutama dengan cara mensubtitusi kapas tersebut dengan kapas sintetis This study aimed to analyze the influence of domestic cotton production, cotton consumption, real GDP and the exchange rate rupiah to the US dollar against the import of cotton. This research is a quantitative study with time series data based on years of 1980-2013. Data obtained from Indexmundi, International Monetary Fund and the United Nations Conference on Trade and Development (UNSCAD. Results of analysis Error Correction Model (ECM shows that domestic cotton production variables in the short term and the

  15. Evaluasi Konsumen di "RM. Pak Kardi" Pemalang dengan Analisis Diskriminan

    Directory of Open Access Journals (Sweden)

    Tuis Susanto

    2017-02-01

    Full Text Available Penelitian ini bertujuan mengetahui apakah ada perbedaan yang siqnifikan dalam variabel dependen (Y yang meliputi konsumen sering Beli (YO, Cukup (Y I dan Jarang Beli (Y2, serta bertujuan mengetahui perilaku konsumen yang benar-benar berbeda, perbedaan dalam  arti perilaku   mereka  sering  membeli, cukup dan jarang membeli. Metode analisis  yang digunakan adalah dengan Wilk's Lambda, Pairwise, F test. Canonical  corellation,   untuk  mencari ada dan tidak perbedaan antar group variabel dependen dan  menginterpretasikan     berdasarkan function at group centroid untuk mengetahui variabel independen mana yang   menjadi  faktor diskriminannya. Hasil yang didapat dari penelitian ini adalah  bahwa  variabel  menu  merupakan faktor pembeda (diskriminan.  Artinya konsumen grup (sering  beli,  cukup  dan jarang   beli  tidak terpengaruh   dengan  usia,  harga,  pendapatan,   dan pelayanan  yang  diberikan oleh RM. Pak Kardi ditunjukkan dengan tanda (+ padafunction I. Jadi  konsumen  yang  membeli  di RM. Pak  Kardi adalah  mereka  yang  benar-benar   menyukai menu  (masakan  khas kepiting RM. Pak Kardi.  Jarak antara  grup  Sering  Beli  dengan grup  Jarang   Beli  adalah yang  terbesar, yakni 7,350. Sedangkan jarak   terkecil   adalah antara grup  Cukup  dengan  grup  Jarang   Beli  (0.522. Dengan demikian dapat  dikatakan   bahwa  Konsumen   di grup  Sering  Beli paling berbeda  selera  Menu  masakannya. Sebaliknya   Menu yang  disukai  oleh  konsumen di RM. Pak Kardi yang termasuk konsumen Cukup mempunyai perbedaan yang  kecil dengan  mereka  yang jarang membeli

  16. ANALISIS KANDUNGAN GARAM GUNUNG ASAL KRAYAN KABUPATEN NUNUKAN KALIMANTAN TIMUR

    Directory of Open Access Journals (Sweden)

    Herman Herman

    2012-06-01

    Full Text Available Has been studied composition of mountain salt from Krayan, Nunukan, East Kalimantan. This study aims to determine the composition of the minerals contained in the  mountain salt. Mountain salt is obtained from wells Krayan District residents were further prepared for analysis using a technique using Atomic Absorption Spectrometer (AAS, further by looking at the pattern of X-ray Diffraction (XRD and Scanning electron microscopic (SEM. Based on the results obtained AAS has identified mineral deposits include: Na, K, Mg, Al, Cu, Zn, Fe, Ba, and Sr. From the results of XRD shows that the main peak of the salt Krayan shows major peaks for NaCl crystals with impurities such as KCl, CaCl2, MgCl2, and AlCl3. SEM observation showed that morphology of Krayan salt have cube shape which is the shape of NaCl crystals with space group Fm3m and lattice parameter (a 5.620 Å Keywords : Mountain Salt, krayan, AAS, XRD, SEM   Abstrak Telah dilakukan penelitian analisis kandungan garam gunung asal Krayan Kabupaten Nunukan Kalimantan Timur. Penelitian ini bertujuan untuk mengetahui komposisi mineral yang terkandung dalam garam gunung. Garam gunung diperoleh dari sumur warga Kecamatan Krayan yang selanjutnya dipreparasi untuk dianalisis dengan menggunakan menggunakan teknik Spektrometer Serapan Atom (SSA, selanjutnya dengan melihat pola Difraksi Sinar X (XRD, dan Scanning Elektron Microscopy (SEM. Berdasarkan hasil SSA telah diidentifikasi diperoleh kandungan mineral antara lain: Na, K, Mg, Al, Cu,  Zn, Fe, Ba, dan Sr. Dari hasil XRD terlihat bahwa puncak utama dari  garam krayan tersebut menunjukkan puncak utama untuk Kristal NaCl, dengan impurities antara lain KCl, CaCl2, MgCl2, dan AlCl3. Selain itu hal ini didukung pula oleh pengamatan SEM, bahwa morfologi SEM garam krayan memperlihatkan bentuk kristal kubus yang merupakan  bentuk dari  Kristal NaCl  dengan  grup ruang  Fm3m  dengan panjang  kisi kristal 5,620 Å. Kata Kunci : Garam Gunung, Krayan

  17. ANALISIS KELAYAKAN INVESTASI PENAMBAHAN MESIN FRAIS BARU PADA CV. XYZ

    Directory of Open Access Journals (Sweden)

    Febri Muhammad Rachadian

    2013-04-01

    Full Text Available Perkembangan teknologi sangat pesat sehingga dunia perindustrian harus mengikuti perkembangannya. Penerapan teknologi diharapkan dapat meningkatkan proses produksi sehingga dapat menghasilkan produk yang berkualitas. Pada industri pembuatan mesin cetak di CV XYZ, mesin-mesin yang digunakan telah hampir lebih dari 20 tahun. Ada indikasi bahwa mesin-mesin tersebut sudah lewat umur pakainya. Alternatif yang digunakan selama ini ialah penggantian komponen yang rusak. Peneliti ingin membandingkan alternative tersebut dengan  penambahan mesin frais baru. Untuk itu diperlukan analisis kelayakan investasi penambahan mesin baru. Dalam perkiraan kurun waktu 10 tahun dan suku bunganya 15 % dengan menggunakan NPV, penambahan mesin frais menarik sebesar Rp 461.201.000 dibandingkan penggantian komponen yang rusak sebesar Rp 211.227.000. Sebaliknya pada PBP, penggantian komponen yang rusak masih mengungguli dengan 1 tahun 4 bulan dibandingkan penambahan mesin frais baru selama 2 tahun 1 bulan. Begitupun juga PI penggantian komponen yang rusak masih menarik sebesar 4,2 dibandingkan PI penambahan mesin frais baru sebesar 2,56. Dapat disimpulkan bahwa dalam jangka waktu 10 tahun, alternatif penggantian komponen yang rusak masih lebih baik dibandingkan penambahan mesin frais baru. Namun, untuk investasi jangka panjang, mungkin saja alternatif penambahan mesin frais baru lebih menarik. Kata Kunci: penggantian komponen rusak, mesin frais baru, mesin cetak Abstract The rapid development of technology makes the world of industry must follow its development. Application of technology is expected to improve the production process so it can be produce a quality product. On the industrial manufacture of printing machines in CV XYZ, the machines have been used almost more than 20 years. There are indications that those machines passed the age lifetime. The alternatives that have been used during this time are the replacement of defective parts. Researchers wanted to

  18. FBR type reactor

    International Nuclear Information System (INIS)

    Kimura, Kimitaka; Fukuie, Ken; Iijima, Tooru; Shimpo, Masakazu.

    1994-01-01

    In an FBR type reactor for exchanging fuels by pulling up reactor core upper mechanisms, a connection mechanism is disposed for connecting the top of the reactor core and the lower end of the reactor core upper mechanisms. In addition, a cylindrical body is disposed surrounding the reactor core upper mechanisms, and a support member is disposed to the cylindrical body for supporting an intermediate portion of the reactor core upper mechanisms. Then, the lower end of the reactor core upper mechanisms is connected to the top of the reactor core. Same displacements are caused to both of them upon occurrence of earthquakes and, as a result, it is possible to eliminate mutual horizontal displacement between a control rod guide hole of the reactor core upper mechanisms and a control rod insertion hole of the reactor core. In addition, since the intermediate portion of the reactor core upper mechanisms is supported by the support member disposed to the cylindrical body surrounding the reactor core upper mechanisms, deformation caused to the lower end of the reactor core upper mechanisms is reduced, so that the mutual horizontal displacement with respect to the control rod insertion hole of the reactor core can be reduced. As a result, performance of control rod insertion upon occurrence of the earthquakes is improved, so that reactor shutdown is conducted more reliably to improve reactor safety. (N.H.)

  19. The prototype fast reactor

    International Nuclear Information System (INIS)

    Broomfield, A.M.

    1985-01-01

    The paper concerns the Prototype Fast Reactor (PFR), which is a liquid metal cooled fast reactor power station, situated at Dounreay, Scotland. The principal design features of a Fast Reactor and the PFR are given, along with key points of operating history, and health and safety features. The role of the PFR in the development programme for commercial reactors is discussed. (U.K.)

  20. Department of reactor technology

    International Nuclear Information System (INIS)

    1980-01-01

    The activities of the Department of Reactor Technology at Risoe during 1979 are described. The work is presented in five chapters: Reactor Engineering, Reactor Physics and Dynamics, Heat Transfer and Hydraulics, The DR 1 Reactor, and Non-Nuclear Activities. A list of the staff and of publications is included. (author)

  1. NCSU Reactor Sharing Program

    International Nuclear Information System (INIS)

    Perez, P.B.

    1993-01-01

    The Nuclear Reactor Program at North Carolina State University provides the PULSTAR Research Reactor and associated facilities to eligible institutions with support, in part, from the Department of Energy Reactor Sharing Program. Participation in the NCSU Reactor Sharing Program continues to increase steadily with visitors ranging from advance high school physics and chemistry students to Ph.D. level research from neighboring universities

  2. Reactor safety method

    International Nuclear Information System (INIS)

    Vachon, L.J.

    1980-01-01

    This invention relates to safety means for preventing a gas cooled nuclear reactor from attaining criticality prior to start up in the event the reactor core is immersed in hydrogenous liquid. This is accomplished by coating the inside surface of the reactor coolant channels with a neutral absorbing material that will vaporize at the reactor's operating temperature

  3. Physics of nuclear reactors

    International Nuclear Information System (INIS)

    Baeten, Peter

    2006-01-01

    This course gives an introduction to Nuclear Reactor Physics. The first chapter explains the most important parameters and concepts in nuclear reactor physics such as fission, cross sections and the effective multiplication factor. Further on, in the second chapter, the flux distributions in a stationary reactor are derived from the diffusion equation. Reactor kinetics, reactor control and reactor dynamics (feedback effects) are described in the following three chapters. The course concludes with a short description of the different types of existing and future reactors. (author)

  4. Reactor core and initially loaded reactor core of nuclear reactor

    International Nuclear Information System (INIS)

    Koyama, Jun-ichi; Aoyama, Motoo.

    1989-01-01

    In BWR type reactors, improvement for the reactor shutdown margin is an important characteristic condition togehter with power distribution flattening . However, in the reactor core at high burnup degree, the reactor shutdown margin is different depending on the radial position of the reactor core. That is , the reactor shutdown margin is smaller in the outer peripheral region than in the central region of the reactor core. In view of the above, the reactor core is divided radially into a central region and as outer region. The amount of fissionable material of first fuel assemblies newly loaded in the outer region is made less than the amount of the fissionable material of second fuel assemblies newly loaded in the central region, to thereby improve the reactor shutdown margin in the outer region. Further, the ratio between the amount of the fissionable material in the upper region and that of the fissionable material in the lower portion of the first fuel assemblies is made smaller than the ratio between the amount of the fissionable material in the upper region and that of the fissionable material in the lower region of the second fuel assemblies, to thereby obtain a sufficient thermal margin in the central region. (K.M.)

  5. Nuclear reactors. Introduction

    International Nuclear Information System (INIS)

    Boiron, P.

    1997-01-01

    This paper is an introduction to the 'nuclear reactors' volume of the Engineers Techniques collection. It gives a general presentation of the different articles of the volume which deal with: the physical basis (neutron physics and ionizing radiations-matter interactions, neutron moderation and diffusion), the basic concepts and functioning of nuclear reactors (possible fuel-moderator-coolant-structure combinations, research and materials testing reactors, reactors theory and neutron characteristics, neutron calculations for reactor cores, thermo-hydraulics, fluid-structure interactions and thermomechanical behaviour of fuels in PWRs and fast breeder reactors, thermal and mechanical effects on reactors structure), the industrial reactors (light water, pressurized water, boiling water, graphite moderated, fast breeder, high temperature and heavy water reactors), and the technology of PWRs (conceiving and building rules, nuclear parks and safety, reactor components and site selection). (J.S.)

  6. Thermonuclear reactor

    International Nuclear Information System (INIS)

    Yasutomi, Yoshiyuki; Nakagawa, Moroo; Sawai, Yuichi; Chiba, Akio; Suzuki, Yasutaka.

    1997-01-01

    Silicon composited with reinforcing metals is used for a divertor cooling substrate having an effect as a cooling tube to provide a silicon base composite material having increased electric resistance and toughness. The blending ratio of reinforcing materials in the form of granules, whiskers or long fibers is controlled in order to control heat conductivity, electric resistivity and mechanical performances. The divertor cooling substrate comprising the silicon base composite material is integrated with a plasma facing material. The production method therefor includes ordinary metal matrix composite forming methods such as powder metallurgy, melting penetration method, high pressure solidification casting method, centrifugal casting method and vacuum casting method. Since the cooling plate is constituted with the light metal and highly electric resistant metal base composite material, sharing force due to eddy current can be reduced, and radiation exposure can be minimized. Accordingly, a cooling structure for a thermonuclear reactor effective for the improvement of environmental problems caused by waste disposal can be attained. (N.H.)

  7. Nuclear reactor

    International Nuclear Information System (INIS)

    Irion, L.; Tautz, J.; Ulrych, G.

    1976-01-01

    This additional patent complements the arrangement of non-return valves to prevent loss of cooling water on fracture of external tubes in the main coolant circuit (according to PS 24 24 427.7) by ensuring that the easily movable valves only operate in case of a fault, but do not flutter in operation, because the direction of flow is not the same at each location where they are installed. The remedy for this undesirable effect consists of allocating 1 non-return valve unit with 5 to 10 valves to each (of several) ducts for the cooling water intake. These units are installed in the annular space between the reactor vessel and the pressure vessel below the inlet of the ducts. Due to flow guidance surfaces in the same space, the incoming cooling water is deflected downwards and as the guiding surfaces are closed at the sides, must pass parallel to the valves of the non-return valve unit. On fracture of the external cooling water inlet pipe concerned, all valves of this unit close due to reversal of flow on the outlet side. (TK) [de

  8. Nuclear reactors

    International Nuclear Information System (INIS)

    Pearson, K.G.

    1977-01-01

    Reference is made to auxiliary means of cooling the nuclear fuel clusters used in light or heavy water cooled nuclear reactors. One method is to provide one or more spray cooling tubes. From holes in the side walls of those tubes coolant water may be sprayed laterally into the cluster against the rods. The flow of main coolant may thus be supplemented or even replaced by the auxiliary coolant. A difficulty, however, is that only those fuel rods close to a spray cooling tube can readily be reached by the auxiliary coolant. In the arrangement described, where the fuel rods are spaced apart by transverse grids, at least one of the interspaces between the grids is provided with an axially extending auxiliary coolant conduit having lateral holes through which an auxiliary coolant is sprayed into the cluster. A deflector is provided that extends from a transverse grid into a position in front of the holes and deflects auxiliary coolant on to parts of the fuel rods otherwise inaccessible to the auxiliary coolant. The construction of the deflector is described. (U.K.)

  9. Nuclear reactor coolant channels

    International Nuclear Information System (INIS)

    Macbeth, R.V.

    1978-01-01

    A nuclear reactor coolant channel is described that is suitable for sub-cooled reactors as in pressurised water reactors as well as for bulk boiling, as in boiling water reactors and steam generating nuclear reactors. The arrangement aims to improve heat transfer between the fuel elements and the coolant. Full constructional details are given. See also other similar patents by the author. (U.K.)

  10. Fast breeder reactors

    International Nuclear Information System (INIS)

    Heinzel, V.

    1975-01-01

    The author gives a survey of 'fast breeder reactors'. In detail the process of breeding, the reasons for the development of fast breeders, the possible breeder reactors, the design criteria, fuels, cladding, coolant, and safety aspects are reported on. Design data of some experimental reactors already in operation are summarized in stabular form. 300 MWe Prototype-Reactors SNR-300 and PFR are explained in detail and data of KWU helium-cooled fast breeder reactors are given. (HR) [de

  11. Text Mining Untuk Analisis Sentimen Review Film Menggunakan Algoritma K-Means

    Directory of Open Access Journals (Sweden)

    Setyo Budi

    2017-02-01

    Full Text Available Kemudahan manusia didalam menggunakan website mengakibatkan bertambahnya dokumen teks yang berupa pendapat dan informasi. Dalam waktu yang lama dokumen teks akan bertambah besar. Text mining merupakan salah satu teknik yang digunakan untuk menggali kumpulan dokumen text sehingga dapat diambil intisarinya. Ada beberapa algoritma yang di gunakan untuk penggalian dokumen untuk analisis sentimen, salah satunya adalah K-Means. Didalam penelitian ini algoritma yang digunakan adalah K-Means. Hasil penelitian menunjukkan bahwa akurasi K-Means dengan dataset digunakan 300 positif dan 300 negatif  akurasinya 57.83%,  700 dokumen positif dan 700  negatif akurasinya 56.71%%, 1000 dokumen positif dan 1000  negatif akurasinya 50.40%%. Dari hasil pengujian disimpulkan bahwa semakin besar dataset yang digunakan semakin rendah akurasi K-Means.   Kata Kunci : Text Mining, Analisis Sentimen, K-Means, Review Film 

  12. Deteksi Kerusakan Batang Rotor Pada Motor Induksi Menggunakan Analisis Arus Mula Berbasis Hilbert Transform

    Directory of Open Access Journals (Sweden)

    Isti Qomah

    2017-01-01

    Full Text Available Kerusakan batang rotor merupakan salah satu jenis kerusakan pada motor induksi yang dapat menyebabkan masalah serius. Kerusakan tersebut dapat mencapai 5% - 10% dari seluruh kasus gangguan motor induksi. Oleh karena itu, perlu adanya diagnosis awal yang mendeteksi adanya gangguan pada rotor motor induksi, agar dapat dilakukan perbaikan lebih cepat dan tanggap sebelum terjadi gangguan yang lebih besar. Tugas Akhir ini membahas terkait teknik deteksi kerusakan batang rotor pada motor induksi dengan menggunakan analisis arus mula. Sistem yang digunakan berbasis  decomposition wavelet transform terlebih dahulu kemudian dilanjutkan dengan analisis berbasis hilbert transform sebagai perangkat pengolahan sinyal sehingga mampu mendeteksi motor dalam keadaan sehat atau mengalami kerusakan. Pengujian sistem dilakukan dalam beberapa kondisi, yaitu kondisi tanpa beban dan berbeban. Selain itu, kondisi yang diberikan adalah kecacatan mulai dai 1BRB hingga 3BRB. Hasil pengujian membuktikan bahwa decomposition wavelet transform dan Hilbert transform mampu mendeteksi perbedaan kondisi pada motor induksi normal ataupun rusak pada batang rotor.

  13. Analisis Nilai Perusahaan pada Implementasi Program Kepemilikan Saham pada Karyawan/Manajemen

    Directory of Open Access Journals (Sweden)

    Dwitya Aribawa

    2016-12-01

      Penelitian ini bertujuan menganalisis economic value added (EVA sebelum dan sesudah implementasi program kepemilikan saham pada karyawan/ manajemen dengan objek penelitian ini adalah perusahaan publik yang menggunakan kebijakan ESOP/MSOP sebagai sarana benefit/incentive berupa pembagian sebagian saham untuk karyawan/ manajemen. Variabel yang digunakan sebagai indikator nilai perusahaan adalah EVA. Nilai EVA dianggap sebagai indikator yang kompleks dan mempertimbangkan faktor resiko (beta dari perusahaan. Perusahaan yang dianalisis adalah perusahaan yang listing di Bursa Efek Indonesia. Terdapat 17 perusahaan yang layak untuk dilakukan analisis berdasarkan kriteria yang ditentukan peneliti. Pengumpulan dan data dianalisis secara pooling, hal ini melihat dari tidak dibedakannya perusahaan berdasarkan industri (multi industri. Paired sample test digunakan untuk menguji hipotesis pada penelitian dan sebelumnya dilakukan uji normalitas data. Hasil analisis bahwa hasil perbandingan rata-rata EVA sebelum dan sesudah implementasi program kepemilikan saham pada karyawan/manajemen terdapat perbedaan yag signifikan.

  14. ANALISIS STRUKTUR AKTANSIAL DAN FUNGSIONAL DALAM VOYAGE AUCENTREDELA TERRE KARYA JULES VERNE

    OpenAIRE

    Ade Yolanda Latjuba, Dr. M.A

    2017-01-01

    Berdasarkan hasil analisis, maka dapat disimpulkan sebagai berikut: 1. Roman Voyage au centre de la terre menceritakan tentang Prof. Lidenbrock, Axel, dan Hans Bjelke melakukan perjalanan luar biasa menuju pusat bumi berdasarkan petunjuk dari Ame Saknussemm yang Axel dan si Professor dapatkan secara tidak sengaja terselip di dalam sebuah buku tua karya Snorre Tarlesson. 2. Prof. Lidenbrock, Axel dan Hans Bjelke memulai perjalanan mereka menuju pusat bumi dengan cara menuruni gunung bera...

  15. Analisis Pengaruh Konsentrasi Gas LPG Menggunakan Sensor TGS 2610 Berbasis Mikrokontroler AVR ATMega8535

    OpenAIRE

    Nurhalimah

    2011-01-01

    Telah dilakukan analisis kuantitatif gas dalam LPG. Penelitian ini dilakukan untuk mengukur konsentrasi gas LPG terhadap sensor. Metoda yang digunakan untuk mengukur konsentrasi gas LPG yaitu sensor gas semikonduktor jenis TGS 2610 keluaran Figaro yang digunakan untuk mendeteksi keberadaan gas. Sementara yang menjadi pusat pengendalian dari seluruh alat yang dirancang digunakan mikrokontroler AVR ATMega8535. Selain itu sistem yang dirancang dilengkapi LCD sebagai tampilan nilai konsentrasi ga...

  16. ANALISIS SEGMENTASI PASAR PRODUK YOGHURT BERDASARKAN PERILAKU KONSUMEN PADA HYPERMART CABANG PANAKUKANG, MAKASSAR

    OpenAIRE

    -, ANDRIANI

    2014-01-01

    2014 v ABSTRAK Andriani. I311 04 049. Analisis Segmentasi Pasar Berdasarkan Perilaku Konsumen pada Hypermart Cabang Panakukang, Makassar. Dibawah Bimbingan Ir. Hastang, M.Si sebagai Pembimbing Utama dan Muh. Ridwan, S.Pt, M.Si. sebagai Pembimbing Anggota. Perkembangan dan peningkatan bisnis khususnya pada usaha peternakan akhir-akhir ini menunjukkan banyak peningkatan. Salah satu strategi yang dapat diterapkan dalam menunjang aktivitas pemasaran oleh perusahaan dalam memasarkan pr...

  17. ANALISIS STRUKTUR MIKRO LAPISAN BOND COAT NIAL THERMAL BARRIER COATING (TBC PADA PADUAN LOGAM BERBASIS CO

    Directory of Open Access Journals (Sweden)

    Toto Sudiro

    2012-11-01

    Full Text Available Kehandalan dan umur pakai sistem Thermal Barrier Coating (TBC ditentukan oleh kestabilan lapisan bond coat dan thermal grown oxide (TGO. Sehingga sangatlah penting untuk memahami mekanisme pembentukan dan degradasi lapisan ini. Pada makalah ini akan dibahas analisis struktur mikro lapisan bond coat NiAl yang dideposisikan pada substrat CoCrNi dengan menggunakan gabungan metoda electroplating dan pack-cementation. Pada makalah ini juga dibahas mekanisme pembentukan void disepanjang interface bond coat¬-substrat setelah tes oksidasi.

  18. Analisis Algoritma Pergantian Cache Pada Proxy Web Server Internet Dengan Simulasi

    OpenAIRE

    Nurwarsito, Heru

    2007-01-01

    Pertumbuhan jumlah client internet dari waktu ke waktu terus bertambah, maka respon akses internet menjadi semakin lambat. Untuk membantu kecepatan akses tersebut maka diperlukan cache pada Proxy Server. Penelitian ini bertujuan untuk menganalisis performansi Proxy Server pada Jaringan Internet terhadap penggunaan algoritma pergantian cache-nya.Analisis Algoritma Pergantian Cache Pada Proxy Server didesain dengan metoda pemodelan simulasi jaringan internet yang terdiri dari Web server, Proxy ...

  19. Analisis Peranan Franchisor Terhadap Suksesnya Bisnis Franchise Pada Mc. Donald’s Cabang Ring Road Medan

    OpenAIRE

    Simarmata, Leonardo

    2012-01-01

    Tujuan penelitian ini adalah untuk mengetahui dan menganalisis peranan franchisor dalam promotion, support service, training, control system dan communication terhadap suksesnya bisnis franchise pada Mc Donald’s Cabang Ring Road Medan. Pengumpulan data primer diperoleh dengan cara memberikan daftar pertanyaan (questionaire) dan melakukan wawancara (interview) secara mendalam (depth interview) kepada pemilik usaha M. Donald’s Cabang Ring Road Medan. Teknik analisis data penelitian ini ad...

  20. Analisis Kelembagaan Rantai Pasok Telur Ayam Ras Peternakan Rakyat Di Jawa Barat

    OpenAIRE

    Sejati, Wahyuning K

    2011-01-01

    Dalam konteks pengembangan pasar komoditas dan peningkatan kesejahteraan peternak rakyat perlu dipahami secara baik karakteristik dan kelembagaan petani, pemasok, dan pasar. Tulisan ini bertujuan untuk menganalisis kelembagaan rantai pasok peternak-pemasok-pasar komoditas telur ayam ras yang meliputi: (1) identifikasi kelembagaan peternakan rakyat ayam ras petelur; (2) analisis kelembagaan rantai pasok komoditas telur; dan (3) antisipasi kelembagaan introduksi rantai pasok telur ayam ras pete...

  1. ANALISIS PERILAKU PENYUSUN ANGGARAN DALAM PERSPEKTIF KEAGENAN PADA KABUPATEN DAN KOTA DI PROVINSI SULAWESI SELATAN

    OpenAIRE

    ILMI, A. NURUL

    2016-01-01

    2016 Analisis Perilaku Penyusun Anggaran dalam Perspektif Keagenan pada Kabupaten dan Kota di Provinsi Sulawesi Selatan Analysis of Budget Compiler???s Behavior within the Agency Perspective in Regency and City of South Sulawesi Province A. Nurul Ilmi Mediaty Aini Indrijawati Penelitian ini bertujuan untuk menganalisis pengaruh perubahan Pendapatan Asli Daerah dan perubahan Dana Perimbangan terhadap perilaku oportunistik penyusun anggaran yang menjelaskan mengenai hubungan k...

  2. Correlacion entre metodos de analisis de Zn disponible en cuatro ordenes de suelos de Costa Rica

    OpenAIRE

    Eloy Molina; Elemer Bornemisza

    2001-01-01

    Se realizo una comparación entre métodos analisis del Zn disponible en 4 ordenes de sue- Analytilos de Costa Rica (Ultisoles, Vertisoles, Andisoles Inceptisoles, 25 de c/u), utilizando las siguientes soluciones extractoras: Olsen Modificado, Meh- lich 3, Morgan Modificado, DTPA y HC1. Las cantidades de Zn extrafdas dependieron de la natu- raleza qufmica de la solucion extractora. El HCl presento los contenidos mas altos de Zn en los chasuelos, excepto en Vertisoles....

  3. Analisi Pengaruh Store Name, Brand Name, Dan Price Discounts Terhadap Purchase Intentions Konsumen Infinite Tunjungan Plaza

    OpenAIRE

    Gunawan, Andy

    2013-01-01

    Andy Gunawan:SkripsiAnalisis pengaruh store name, brand name dan price discounts terhadap purchase intention konsumen infnite tunjungan plaza Di era globalisasi ini, persaingan dagang antara Perusahaan – Perusahaan baik lokal maupun global menjadi semakin ketat, oleh karena itu Perusahaan selalu berusaha untuk meningkatkan ketertarikan minat beli konsumen. Beberapa variabel yang menjadi fokus Perusahaan adalah store name, brand name, dan price discount. Tujuan penelitian ini adalah untuk meng...

  4. KERAGAAN WARNA IKAN CLOWN BIAK (Amphiprion percula) POPULASI ALAM DAN BUDIDAYA BERDASARKAN ANALISIS GAMBAR DIGITAL

    OpenAIRE

    Ruby Vidia Kusumah; Sawung Cindelaras; Anjang Bangun Prasetio

    2015-01-01

    Penelitian ini bertujuan untuk mengkaji keragaan warna ikan clown Biak (Amphiprion percula) populasi alam dan budidaya berdasarkan analisis gambar digital sebagai dasar upaya pemuliaannya. Gambar digital diambil dari koleksi ikan clown Biak Balai Besar Perikanan Budidaya Laut Lampung, Balai Besar Penelitian dan Pengembangan Budidaya Laut Gondol, Bali; serta pengumpul ikan hias di Denpasar, Bali menggunakan kamera digital Canon EOS 600D. Pola warna dikarakterisasi secara visual terhadap varias...

  5. ANALISIS RESIDU PESTISIDA PIRETRIN DALAM TOMAT DAN SELADA DARI BEBERAPA PASAR DI JAKARTA

    Directory of Open Access Journals (Sweden)

    D. Mutiatikum

    2012-10-01

    Full Text Available Penggunaan pestisida untuk budidaya komoditi pertanian memungkinkan adanya residu pestisida dalam sayuran sehingga konsumen berisiko tercemar pestisida yang merupakan zat toksik  sehingga diperlukan pemantmwn kadar residu dalam sayuran terutama yang langsung dikonsumsi tanpa dimasak. Penetapan  residu pestisida dilakukan dengan menggunakan kromatografi gas (GC. Hasil analisis residu pestisida golongan peretrin dalam tomat dan selada yang disampling dari pasar induk, pasar tradisional. pasar swalayan dan hipermarket yang berada diwilayah Jakarta menunjukkan hasil yang negatif (tidak terdeteksi.

  6. PESAN MORAL DALAM FILM TO KILL A MOCKINGBIRD (ANALISIS SEMIOTIKA PADA FILM TO KILL A MOCKINGBIRD

    OpenAIRE

    RENYOET, JAQUILINE MELISSA

    2014-01-01

    2014 JAQUILINE MELISSA RENYOET. Pesan Moral Dalam Film To Kill A Mockingbird (Analisis Semiotika Pada Film To Kill A Mockingbird). (Dibimbing oleh Muh. Nadjib dan Alem Febri Sonni). Tujuan Penelitian ini adalah mengidentifikasi bentuk pesan moral dan memahami makna pesan moral dalam film To Kill A Mockingbird. Penelitian ini dilakukan selama kurang lebih 2 bulan yaitu Maret ??? Mei 2014. Metode yang digunakan untuk penelitian ini adalah metode penelitian kualitatif den...

  7. ANALISIS PENERAPAN TAX PLANNING ATAS PAJAK PENGHASILAN BADAN PADA PT SEMEN TONASA PANGKEP

    OpenAIRE

    WIJAYA, AKBAR

    2014-01-01

    2014 ABSTRAK ANALISIS PENERAPAN TAX PLANNING ATAS PAJAK PENGHASILAN BADAN PADA PT SEMEN TONASA PANGKEP Implementation Analysis of Tax Planning on Board Incoming Tax of Semen Tonasa Ltd. Pangkep Akbar Wijaya Amiruddin Darmawati Penelitian ini bertujuan untuk mengetahui tax planning yang dilakukan oleh PT Semen Tonasa Pangkep, dan untuk menganalisis penerapan tax planning yang dilakukan oleh PT Semen Tonasa Pangkep dengan undang-undang perpajakan yang berlaku. Data...

  8. Analisis “Brand Equity” Siaran Berita Stasiun Televisi Swasta Indonesia

    OpenAIRE

    Arif Sugiono; Prima Mulyasari Agustina

    2004-01-01

    Penelitian ini bertujuan untuk mengetahui keadaan berbagai merek siaran berita stasiun televisi swasta berdasarkan dimensi ekuitas mereknya, dengan memfokuskan pada empat dimensi ekuitas merek, yang meliputi loyalitas merek, kesadaran merek, persepsi kualitas, dan asosiasi merek. Metode yang digunakan metode deskriptif, dengan analisis data menggunakan tabulasi dan teknik skala. Hasil penelitian dari dimensi loyalitas merek tiga besar siaran berita secara berurutan adalah Buser, Patroli dan L...

  9. Analisis Biaya, Volume, Laba sebagai Alat Bantu Perencanaan Laba pada Hotel Sedona Manado

    OpenAIRE

    Samahati, Ricky Budiman

    2013-01-01

    Manado sebagai kota pariwisata menyediakan sarana dan prasarana kepariwisataan termasuk jasa perhotelan. Hotel Sedona merupakan salah satu hotel yang ada di Kota Manado dan merupakan objek yang dipilih penulis dengan menggunakan data operasional penjualan yang terjadi pada tahun 2011 dan 2012. Tujuan penelitian ini yaitu untuk mengetahui titik break even point, jumlah volume penjualan pada tingkat laba yang direncanakan, serta tingkat margin of safety pada Hotel Sedona Manado. Metode analisi...

  10. Text Mining Untuk Analisis Sentimen Review Film Menggunakan Algoritma K-Means

    OpenAIRE

    Setyo Budi

    2017-01-01

    Kemudahan manusia didalam menggunakan website mengakibatkan bertambahnya dokumen teks yang berupa pendapat dan informasi. Dalam waktu yang lama dokumen teks akan bertambah besar. Text mining merupakan salah satu teknik yang digunakan untuk menggali kumpulan dokumen text sehingga dapat diambil intisarinya. Ada beberapa algoritma yang di gunakan untuk penggalian dokumen untuk analisis sentimen, salah satunya adalah K-Means. Didalam penelitian ini algoritma yang digunakan adalah K-Means. Hasil p...

  11. ANALISIS DEKONSTRUKSI TOKOH TAKESHI DAN MITSUSABURO DALAM NOVEL SILENT CRY KARYA KENZABURO OE PERSPEKTIF JACQUES DERRIDA

    Directory of Open Access Journals (Sweden)

    Abd. Ghofur

    2015-12-01

    Full Text Available This article is a little result done by the writer, in which critical analisys discourse study as a tool to learn literature. It is Kenzaburo Oe’s writing, a Japan writer who got Pulitzer or noble in literature. It employs Jaques Derrida deconstructive theory, while the researcher focuses on binary opposition.  When deconstruction used, it will expose inside of the text, furthermore it produces other meaning or different point of view from the real text.

  12. Analisis Juridis Pelaksanaan Penghapusan Piutang Terhadap Kredit Macet (Studi Pada PT. Bank Sumut)

    OpenAIRE

    Margareth Eka Purba

    2009-01-01

    Usaha pokok Bank adalah sektor perkreditan dan pendapatan bank yang terbesar adalah berasal dari sektor perkreditan. Kredit, baik konsumtif maupun produktif memang sudah mejadi target utama perbankan dalam meraih pendapatan, selain fee based income tentunya. Dengan demikian, kelebihan dana masyarakat yang bisa membuat bank memiliki dana idle yang akan lebih produktif lagi karena diberikan dalam bentuk kredit.Walaupun sudah dilakukan analisis kredit, dan kredit sudah dinyatakan layak untuk dib...

  13. ANALISIS POTENSI PEMUNGUTAN PAJAK HOTEL DALAM RANGKA PENINGKATAN PENDAPATAN ASLI DAERAH KOTA MAKASSAR

    OpenAIRE

    -, MUHAMMAD TRY DHARSANA AMBO ALA DEPARTEMEN AKUNTANSI FAKULTAS EKONOMI DAN BISNIS UNIVERSITAS HASANUDDIN MAKASSAR 2017

    2017-01-01

    Analisis Potensi Pemungutan Pajak Hotel dalam Rangka Peningkatan Pendapatan Asli Daerah Kota Makassar Analysis of Hotels Tax Collection Potency in Makkasar???s Own-Source Revenue Increase Muhammad Try Dharsana Ambo Ala Andi Kusumawati Yulianus Sampe Tujuan penelitian ini adalah untuk mengetahui besar potensi pajak hotel dan seberapa jauh bentuk usaha yang di lakukan oleh pemerintah daerah dalam menggali potensi pajak hotel di kota Makassar. Untuk menghitung potensi, efektivi...

  14. Perfil cognitivo de pacientes con trastorno obsesivo compulsivo: resultados preliminares Cognitive Profile Of Obsessive-Compulsive Disorder Patients: Preliminary Data

    Directory of Open Access Journals (Sweden)

    Ricardo Rodríguez Biglieri

    2008-12-01

    Full Text Available El artículo presenta resultados preliminares de una tesis doctoral, desarrollada en el marco de una beca del CONICET, cuyo objetivo es evaluar el perfil cognitivo de pacientes con Trastorno Obsesivo Compulsivo (TOC. El Cuestionario de Creencias Obsesivas y la Escala de Fusión Pensamiento Acción fueron administrados a 28 pacientes TOC; 30 con otros cuadros de ansiedad (CA; y 32 controles comunitarios (CC. Este último grupo presentó puntuaciones más bajas en todas las creencias examinadas. El grupo TOC, comparado con el CA, registró en mayor grado creencias sobre responsabilidad por daño, sobrestimación de peligro, importancia de los pensamientos intrusivos y necesidad de controlarlos, y creencias de tipo moral y de daño a terceros. Ambos grupos no difirieron en las creencias sobre perfeccionismo y necesidad de certeza, y en las probabilísticas sobre daño a sí mismo; las cuales podrían considerarse factores comunes a varios cuadros de ansiedad y no específicos del TOC.The article presents preliminary findings from a doctoral thesis framework assessing the cognitive profile of Obsessive Compulsive Disorder (OCD patients. The Obsessive Belief Questionnaire and the Thought-Action Fusion Scale were completed by 30 obsessive-compulsive disorder patients (OCD, 30 patients with other anxiety disorders (AC, and 32 community controls (CC. The comparisons showed that CC group had signifi- cantly lower scores than both AC and CC groups in all variables evaluated. The OCD group had significantly higher scores than AC in importance and control of intrusive thoughts, responsibility for harm, overestimation of threat, and in moral and likelihood for events happening to other people components of thought-action fusion (TAF beliefs. There were not statistically differences between OCD and AC groups in perfectionism and need for certainty, and in likelihood for events happening to oneself component of TAF beliefs. Therefore, these later beliefs could

  15. Construcción y arquitectura industrial para el siglo XXI: un análisis preliminar

    Directory of Open Access Journals (Sweden)

    del Caño Gochí, A.

    2001-06-01

    Full Text Available This paper presents a preliminary analysis, performed by the authors. on the past, present and possible future of the main issues related to the design and construction of industrial complexes. Among others. those issues include the industrial development; structural analysis and design methods; design tools; construction materials; structural types; types of non-structural systems (façade, Roof, building services; technology of construction processes; precast and industrialized systems; construction project management; construction labour; energy-related features of the industrial complexes; methodologies, technology and labour for manufacturing; environmental issues; aesthetics; planning of industrial areas (industrial parks. technology parks; industrial plants location. Some conclusions are specific to the design and construction of industrial complexes, whereas other are common to the other construction subsectors.El presente artículo expone un análisis preliminar realizado por los autores sobre la evolución histórica de los principales aspectos de la construcción y arquitectura industrial, así como de las posibles líneas que podría seguir la evolución a futuro de cada uno de dichos aspectos. Los aspectos analizados son: el desarrollo industrial; los métodos de cálculo y dimensionamiento estructural; las herramientas de diseño; los materiales de construcción; las tipologías estructurales; los sistemas constructivos no estructurales; la tecnología de los procesos constructivos; la prefabricación e industrialización; la organización y dirección del proyecto; la mano de obra para la construcción; los aspectos energéticos; las tecnologías y filosofías de fabricación y su mano de obra; el respeto al medio ambiente; la estética; el urbanismo industrial; y otros aspectos como la seguridad, la recuperación de construcciones industriales históricas, o la localización y emplazamiento, entre otros. Algunas de las

  16. Adaptação da escala Brian para uso em crianças e adolescentes: um estudo preliminar

    Directory of Open Access Journals (Sweden)

    Ana Claudia Mércio Loredo Souza

    2013-01-01

    Full Text Available Introdução: Alterações nos ritmos circadianos tem sido frequentemente observadas entre pacientes com Transtorno do Humor Bipolar (THB. No entanto, existem poucos instrumentos para medi-las e a maioria deles mede exclusivamente distúrbios do sono. A escala BRIAN, validada para adultos com THB, avalia a regularidade dos ritmos biológicos em quatro diferentes aspectos: sono, atividades, social e padrão de alimentação. O objetivo deste estudo piloto foi adaptar a escala BRIAN para uma população de crianças e adolescentes (BRIAN-K e avaliar se o novo instrumento é capaz de detectar diferenças entre pacientes e controles saudáveis. Métodos: Foram avaliados 20 pacientes com THB entre 8-16 anos e 32 controles pareados por sexo e idade. Os sujeitos foram avaliados através de entrevista clínica, K-SADS-PL e testagem cognitiva. A BRIAN-K foi aplicada em ambos os grupos. Resultados: O grupo de pacientes com THB apresentou escores mais altos de alterações em seus ritmos circadianos pelo escore total da BRIAN-K, quando comparados com o grupo controle (p=0,022. Particularmente, maior irregularidade foi observada no domínio “atividades” no grupo de pacientes (p=0,001. Nossos resultados também mostraram uma correlação positiva entre a idade de diagnóstico e o domínio “sono” da BRIAN-K (r = 0,485; p = 0,03. Conclusões: Estes dados preliminares sugerem que a versão BRIAN-K, recentemente adaptada para crianças e adolescentes, é capaz de discriminar pacientes com THB e controles. Futuros estudos com maior tamanho amostral são necessários para determinar a confiabilidade, validade interna e externa do presente instrumento.

  17. Analisis Model Penelusuran Backward Chaining dalam Mendeteksi Tingkat Kecanduan Game pada Anak

    Directory of Open Access Journals (Sweden)

    Anastasya Latubessy

    2017-10-01

    Full Text Available Game addiction rate can be detected by applying expert system. This study developed a model of game addiction analysis using backward chaining. This model uses six types of game addiction behavior, among others, salience, euphoria, conflict, tolerance, withdrawal, relapse and reinstatement. Someone is said to be addicted to the game if it meets at least three types of game addiction behavior. Testing the validity of the model is done by testing the closeness of the agreement between the model analysis and expert analysis, resulting in a value of 0.78 which means having a strong agreement. Tingkat kecanduan game dapat dideteksi dengan mengaplikasikan sistem pakar. Penelitian ini mengembangkan model analisis tingkat kecanduan game menggunakan backward chaining. Model ini menggunakan enam jenis perilaku kecanduan game antara lain, salience, euphoria, conflict, tolerance, withdrawal, relapse dan reinstatement. Seseorang dikatakan kecanduan game jika memenuhi paling sedikit tiga jenis perilaku kecanduan game. Pengujian validitas model dilakukan dengan menguji keeratan kesepakatan antara analisis model dan analisis pakar, menghasilkan nilai 0,78 yang berarti memiliki keeratan kesepakatan kuat.

  18. Analisis Tata Kelola Teknologi Informasi Menggunakan Kerangka Kerja COBIT 4.1 pada Fakultas Teknik Undip

    Directory of Open Access Journals (Sweden)

    Arini Arumana

    2014-06-01

    Full Text Available Peran teknologi informasi dalam suatu instansi sudah tidak dapat dielakkan lagi, mengingat perkembangannya yang begitu pesat seiring berjalannya waktu. Namun masalah yang sering terjadi di instansi adalah penggunaan teknologi informasi yang kadang tidak sesuai dengan harapan. Oleh karena itu diperlukan tata kelola terhadap penggunaan teknologi informasi yang biasa disebut dengan IT Governance. Fakultas teknik UNDIP adalah salah satu fakultas yang dalam operasionalnya sangat mengandalkan teknologi informasi, baik dalam aktifitas belajar mengajar maupun dalam menjalankan operasional bisnis. Kondisi sekarang di Fakultas Teknik sendiri tidak terdapat suatu indikator yang dapat menyatakan bahwa kinerja TI yang berjalan telah sesuai dengan visi dan misi Fakultas Teknik, oleh karena itu perlu dilakukan analisis tata kelola teknologi informasi, guna mengetahui performa TI sekarang sesuai dengan yang diharapkan oleh managemen atau tidak. Hasil dari analisis ini berupa tingkat kematangan tata kelola TI yang mecerminkan kondisi tata kelola TI di Fakultas Teknik dengan mengacu pada maturity level yang disediakan kerangka kerja COBIT 4.1, yakni dari level 0 (non-existent sampai 5 (optimized. Berdasarkan analisis yang dilakukan, secara garis besar kondisi kematangan tata kelola TI Fakultas Teknik berada pada level 2 yakni repeatable but intuitive. Kondisi ini mengacu pada beberapa kelemahan dalam proses-proses TI yang berjalan, diantaranya penetapan dan dokumentasi tindakan, kebijakan dan prosedur yang minim, serta tidak tersedianya service level yang disetujui bersama.

  19. ANALISIS TINGKAT KAPABILITAS SISTEM INFORMASI RUMAH SAKIT BERDASARKAN COBIT 5 (MEA01 PADA RSUD TUGUREJO SEMARANG

    Directory of Open Access Journals (Sweden)

    Ariel Bagus Nugroho

    2015-11-01

    Full Text Available RSUD Tugurejo Semarang merupakan Rumah Sakit kelas B milik pemerintah Provinsi Jawa Tengah yang menyediakan pelayanan jasa untuk masyarakat. Dalam manajemen pengolahan data, RSUD Tugurejo Semarang telah menggunakan sistem informasi rumah sakit. Untuk mengetahui apakah sistem informasi telah berjalan seperti yang diharapkan, maka perlu dilakukan analisis tatakelola teknologi informasi. Pada penelitian ini analisis tatakelola teknologi informasi berfokus pada proses pengawasan, evaluasi dan penilaian kinerja, dan kesesuaian kinerja teknologi informasi, yaitu domain MEA01 pada framework COBIT 5.Tujuan penelitian ini untuk mengetahui tingkat kapabilitas dan strategi perbaikan untuk proses pengawasan, evaluasi dan penilaian kinerja dan kesesuaian TI. Metode pengumpulan  data penelitian ini dengan menggunakan studi dokumen, kuesioner dan wawancara kemudian dianalisis tingkat kapabilitas dan kesenjangan. Tingkat kapabilitas yang didapat dari hasil penelitian yaitu berada level 2 (managed. Untuk menaikkan tingkat kapabilitas pada level 3 maka maka perlu dilakukan secara bertahap strategi perbaikan pada PA 2.1, PA2.2, PA 3.1, dan 3.2. Kata kunci: Analisis Tata Kelola TI, COBIT 5, MEA01, Tingkat Kapabilitas, Rumah Sakit.

  20. Analisis Pengaruh Display Interior Terhadap Perilaku Pembelian Impulsif Konsumen Indomaret Pontianak

    Directory of Open Access Journals (Sweden)

    Ana Fitriana

    2016-07-01

    Full Text Available Pembelian impulsif adalah kecenderungan membeli produk atau jasa dengan tidak terencana, selanjutnya ketika pembelian sering tidak terencana, maka umumnya konsumen membeli produk atau jasa yang tidak terdaftar dalam daftar belanja. Sejalan dengan tujuan pemasar, pembelian tidak terencana ini berdampak sangat positif bagi pihak perusahaan. Salah satu perilaku konsumen yang sangat penting adalah perilaku belanja impulsif. Penelitian ini bertujuan untuk mengetahui pengaruh display interior pada Indomaret Pontianak terhadap impulsive buying konsumennya. Metode penelitian yang digunakan adalah penelitian kuantitatif. Populasi penelitian ini adalah konsumen Indomaret Pontianak, sebanyak 100 responden dipilih secara accidental sampling sebagai sampel penelitian. Metode pengumpulan data yang digunakan adalah metode pengumpulan data primer dengan teknik pengumpulan data kuesioner. Teknik analisis data yang digunakan adalah uji validitas dan reliabilitas, analisis koefisien determinasi, analisis regresi berganda dan uji hipotesis.Hasil perhitungan data menggunakan SPSS for windows ver 16 menunjukan secara simultan pengaruh display interior terhadap impulsive buying diketahui berpengaruh sebesar 61,31%. Sedangkan 38,69% dipengaruhi oleh faktor lain yang tidak diteliti didalam penelitian ini. Secara parsial tiga variabel bebas yaitu pengadaan barang, pengelompokan barang, dan penyusunan barang dan pencahayaan mempunyai pengaruh signifikan terhadap Impulsive buying.   Kata kunci — Pengadaan barang, Pengelompokan barang, Penyusunan barang dan pencahayaan, Perilaku Pembelian Impulsif

  1. Risk analysis in the chemical industry; Analisis de riesgos en la industria quimica

    Energy Technology Data Exchange (ETDEWEB)

    Rea Soto, Rogelio; Sandoval Valenzuela, Salvador [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    2000-07-01

    The Instituto de Investigaciones Electricas has a group of risk analysis (GAR), specialized in the most advanced methodologies to apply them in diverse industries of the productive sector, such as the nuclear, the oil and the chemical industries. In this work the integrated methodology that the GAR uses to make risk analysis in the chemical and oil industries is described. These analyses have as an objective to make a meticulous evaluation of the system design, the operation practices, the maintenance and inspection policies and the emergency plans. [Spanish] El Instituto de Investigaciones Electricas cuenta con un grupo de analisis de riesgo (GAR), especializado en las metodologias mas avanzadas para aplicarlas en diversas industrias del sector productivo, como lo son la nuclear, la petrolera y la quimica. En este trabajo se describe la metodologia integrada que el GAR utiliza para realizar analisis de riesgos en las industrias quimica y petrolera. Estos analisis tienen como objetivo realizar una minuciosa evaluacion del diseno del sistema, las practicas de operacion, las politicas de mantenimiento e inspeccion y los planes de emergencia.

  2. PENGGUNAAN METODE STRUCTURAL EQUATION MODELLING UNTUK ANALISIS FAKTOR YANG MEMPENGARUHI MOTIVASI BELAJAR MAHASISWA FIP UMJ

    Directory of Open Access Journals (Sweden)

    Ririn Widiyasari

    2018-02-01

    Full Text Available Tujuan yang ingin dicapai dalam penelitian ini adalah mengetahui faktor apa saja  yang mempengaruhi motivasi belajar mahasiswa, apakah terdapat pengaruh yang signifikan antara cara belajar, fasilitas belajar dan lingkungan belajar terhadap motivasi belajar mahasiswa, serta faktor mana yang paling berpengaruh terhadap motivasi belajar mahasiswa. Jumlah sampel dalam penelitian ini adalah 192 mahasiswa (FIP UMJ angkatan tahun 2013-2015 yang aktif mengikuti perkuliahan. Metode penelitian yang dilakukan adalah metode kuantitatif survey. Metode pengambilan data menggunakan  kuesioner dengan skala likert. Metode analisis data yang digunakan adalah analisis deskriptif, dan analisis  Structural Equation Modeling (SEM berbantuan program LISREL 8.3. Uji hipotesis yang digunakan dalam penelitian ini adalah uji Chi-square dan uji t. Hasil penelitian menunjukkan bahwa variabel cara belajar memiliki kontribusi yang paling besar, selanjutnya variabel kedua yang berkontribusi meningkatkan motivasi belajar adalah lingkungan belajar dan terakhir fasilitas belajar memberikan pengaruh yang paling kecil terhadap motivasi belajar. Jadi, variabel laten cara belajar dan lingkungan belajar berpengaruh positif terhadap motivasi belajar dan fasilitas belajar berpengaruh negatif terhadap motivasi belajar.

  3. Reactor Physics Training

    International Nuclear Information System (INIS)

    Baeten, P.

    2007-01-01

    University courses in nuclear reactor physics at the universities consist of a theoretical description of the physics and technology of nuclear reactors. In order to demonstrate the basic concepts in reactor physics, training exercises in nuclear reactor installations are also desirable. Since the number of reactor facilities is however strongly decreasing in Europe, it becomes difficult to offer to students a means for demonstrating the basic concepts in reactor physics by performing training exercises in nuclear installations. Universities do not generally possess the capabilities for performing training exercises. Therefore, SCK-CEN offers universities the possibility to perform (on a commercial basis) training exercises at its infrastructure consisting of two research reactors (BR1 and VENUS). Besides the organisation of training exercises in the framework of university courses, SCK-CEN also organizes theoretical courses in reactor physics for the education and training of nuclear reactor operators. It is indeed a very important subject to guarantee the safe operation of present and future nuclear reactors. In this framework, an understanding of the fundamental principles of nuclear reactor physics is also necessary for reactor operators. Therefore, the organisation of a basic Nuclear reactor physics course at the level of reactor operators in the initial and continuous training of reactor operators has proven to be indispensable. In most countries, such training also results from the direct request from the safety authorities to assure the high level of competence of the staff in nuclear reactors. The objectives this activity are: (1) to provide training and education activities in reactor physics for university students and (2) to organise courses in nuclear reactor physics for reactor operators

  4. The fast breeder reactor

    International Nuclear Information System (INIS)

    Collier, J.

    1990-01-01

    The arguments for and against the fast breeder reactor are debated. The case for the fast reactor is that the world energy demand will increase due to increasing population over the next forty years and that the damage to the global environment from burning fossil fuels which contribute to the greenhouse effect. Nuclear fission is the only large scale energy source which can achieve a cut in the use of carbon based fuels although energy conservation and renewable sources will also be important. Fast reactors produce more energy from uranium than other types of (thermal) reactors such as AGRs and PWRs. Fast reactors would be important from about 2020 onwards especially as by then many thermal reactors will need to be replaced. Fast reactors are also safer than normal reactors. The arguments against fast reactors are largely economic. The cost, especially the capital cost is very high. The viability of the technology is also questioned. (UK)

  5. Nuclear reactor instrumentation at research reactor renewal

    International Nuclear Information System (INIS)

    Baers, B.; Pellionisz, P.

    1981-10-01

    The paper overviews the state-of-the-art of research reactor renewals. As a case study the instrumentation reconstruction of the Finnish 250 kW TRIGA reactor is described, with particular emphasis on the nuclear control instrumentation and equipment which has been developed and manufactured by the Central Research Institute for Physics, Budapest. Beside the presentation of the nuclear instrument family developed primarily for research reactor reconstructions, the quality assurance policy conducted during the manufacturing process is also discussed. (author)

  6. Safeguarding research reactors

    International Nuclear Information System (INIS)

    Powers, J.A.

    1983-03-01

    The report is organized in four sections, including the introduction. The second section contains a discussion of the characteristics and attributes of research reactors important to safeguards. In this section, research reactors are described according to their power level, if greater than 25 thermal megawatts, or according to each fuel type. This descriptive discussion includes both reactor and reactor fuel information of a generic nature, according to the following categories. 1. Research reactors with more than 25 megawatts thermal power, 2. Plate fuelled reactors, 3. Assembly fuelled reactors. 4. Research reactors fuelled with individual rods. 5. Disk fuelled reactors, and 6. Research reactors fuelled with aqueous homogeneous fuel. The third section consists of a brief discussion of general IAEA safeguards as they apply to research reactors. This section is based on IAEA safeguards implementation documents and technical reports that are used to establish Agency-State agreements and facility attachments. The fourth and last section describes inspection activities at research reactors necessary to meet Agency objectives. The scope of the activities extends to both pre and post inspection as well as the on-site inspection and includes the examination of records and reports relative to reactor operation and to receipts, shipments and certain internal transfers, periodic verification of fresh fuel, spent fuel and core fuel, activities related to containment and surveillance, and other selected activities, depending on the reactor

  7. Guide to power reactors

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1959-07-15

    The IAEA's major first scientific publication is the Directory of Power Reactors now in operation or under construction in various parts of the world. The purpose of the directory is to present important details of various power projects in such a way as to provide a source of easy reference for anyone interested in the development of the peaceful uses of atomic energy, either at the technical or management level. Six pages have been devoted to each reactor the first of which contains general information, reactor physics data and information about the core. The second and third contain sketches of the fuel element or of the fuel element assembly, and of the horizontal and vertical sections of the reactor. On the fourth page information is grouped under the following heads: fuel element, core heat transfer, control, reactor vessel and over-all dimensions, and fluid flow. The fifth page shows a simplified flow diagram, while the sixth provides information on reflector and shielding, containment and turbo generator. Some information has also been given, when available, on cost estimates and operating staff requirements. Remarks and a bibliography constitute the last part of the description of each reactor. Reactor projects included in this directory are pressurized light water cooled power reactors. Boiling light water cooled power reactors, heavy water cooled power reactors, gas cooled power reactors, organic cooled power reactors liquid metal cooled power reactors and liquid metal cooled power reactors

  8. ANALISIS PENGARUH UMUR, PENDIDIKAN, DAN UPAH TERHADAP PRODUKTIVITAS TENAGA KERJA

    Directory of Open Access Journals (Sweden)

    Zakaria Firmansyah

    2017-06-01

    Full Text Available Produktivitas merupakan salah satu indikator yang paling penting dari kegiatan ekonomi. Produktivitas merupakan pendorong utama pertumbuhan ekonomi penting, yaitu sebagai leverage (leverage untuk pertumbuhan ekonomi nasional dalam jangka panjang. Itulah salah satu alasan mengapa negara-negara saat ini banyak telah berusaha untuk meningkatkan  produktivitas. Masalah ketenagakerjaan didominasi oleh kemampuan produktivitas tenaga kerja masih belum memadai baik dari segi pendidikan, pengalaman kerja dan lain-lain Satu hanya untuk pekerja di mitra industri rambut Purbalingga bahwa sebagian besar pekerja perempuan tersebut. Data dianalisis menggunakan analisis deskriptif kuantitatif, Regresi Pengujian, dan Asumsi Klasik Uji. Hasil yang diperoleh menunjukkan bahwa secara bersama-sama Umur, Pendidikan, dan Upah dampak positif dan signifikan terhadap produktivitas tenaga kerja di rambut Industri Mitra Purbalingga dibuktikan dari hasil uji F untuk dan nilai prob. F-hitung (0.000000 <5%. R2 = 0,98673. berarti bahwa 98,6 persen dari kemampuan variasi set variabel independen (independent yang digunakan dalam model ini dapat menjelaskan variasi dalam produktivitas tenaga kerja di mitra industri rambut di Purbalingga. Sedangkan 1,4 persen sisanya  dipengaruhi  oleh  variasi dalam variabel dependen dijelaskan oleh variabel lain di luar model yang digunakan dalam penelitian ini. Kesimpulan dari penelitian ini adalah sebagian yaitu 3 variabel independen digunakan untuk memiliki pengaruh yang signifikan pada α = 5% dari produktivitas tenaga kerja di mitra Industri Rambut di Purbalingga variabel ini adalah usia, pendidikan, dan Upah. Productivity is one of the most important indicator of economic activity . Productivity is a key driver of economic growth vital , namely as leverage ( leverage for national economic growth in the long term. That's one reason why today many countries have sought to improve productivity. Employment issues are dominated by the

  9. ANALISIS DAN MODEL STRATEGI PENINGKATAN DAYA SAING PRODUK EDAMAME BEKU

    Directory of Open Access Journals (Sweden)

    Sandryas Alief Kurniasanti

    2015-03-01

    penelitian ini adalah untuk menganalisis daya saing dan merumuskan prioritas alternatif strategi peningkatan daya saing produk edamame beku di PT MT 27. Metode yang digunakan dalam penelitian ini adalah Revealed Comparative Advantage untuk mengetahui kinerja ekspor dari produk edamame beku di pasar dunia, kemudian menganalisis faktor persaingan dengan menggunakan Diamond Porter’s Theory. Alternatif strategi dihasilkan dari analisis SWOT dan ditentukan prioritasnya dengan menggunakan analytical hierarchy process dari satu narasumber ahli. Hasil penelitian menunjukkan bahwa prioritas alternatif strategi peningkatan daya saing produk edamame beku PT MT 27 secara berurutan meliputi: (1 diversifikasi pasar, (2 diversifikasi produk, (3 meningkatkan kerjasama luar negeri, (4 pengembangan divisi Research and Development, (5 mengembangkan program Corporate Social Responsibility, (6 pengelolaan keuangan secara baik dan benar, serta (7 mengembangkan areal pertanian yang berbasis rumah kaca untuk menghindari cuaca buruk karena beriklim tropis. Implikasi Manajerial dari penelitian ini adalah mengembangkan pasar yang sudah ada, dan mengembangkan jenis produk yang diproduksi untuk memenuhi selera pasar ekspor dan juga penghematan biaya produksi. Kata kunci: daya saing, edamame beku, Mitratani Dua Tujuh, strategi daya saing

  10. ANALISIS KARAKTER WISATAWAN MANCANEGARA TERHADAP FASILITAS WISATA KAWASAN PRAWIROTAMAN

    Directory of Open Access Journals (Sweden)

    Reiza Miftah Wirakusuma

    2016-03-01

    , pengrajin batik dan suasana akomodasi yang santai menjadikan nilai yang sangat berharga bagi suatu daya tarik wisata. Dengan adanya perkembangan teknologi dan semakin tingginya persaingan perhotelan di Yogyakarta, Lalu bagaimanakah dengan kondisi saat ini? penelitian ini akan mengungkap apa yang mempengaruhi wisatawan mancanegara datang ke kawasan Prawirotaman. Temuan-temuan yang dihasilkan yaitu Wisatawan Mancanegara didominasi 5 besar kewarganegaraan: Belanda, Jerman, Perancis, USA, dan Jepang. Dari hasil analisis dapat disimpulkan bahwa (1 Adanya pengaruh secara parsial antara variabel daya tarik terhadap kunjungan wisatawan mancanegara. Hal ini menyatakan bahwa variabel Daya Tarik dapat berpengaruh secara mandiri tanpa variabel lain. Hal ini juga menandakan bahwa kekuatan daya tarik kawasan yang utama adalah keragaman kompleks kuliner internasional dengan harga yang terjangkau disamping suasana dan ketersediaan akomodasi. (2 Karakter wisatawan mancanegara mempengaruhi kombinasi dari produk wisata yang ditawarkan Kawasan Prawirotaman. Perlu diketahui bahwa karakter segmentasi demografis ternyata lebih dominan untuk menentukan pola perjalanan. kesimpulannya, wisatawan mancanegara dibagi berdasarkan usia seperti Youth Travelers (Independent or Couple, Honeymooners, Retirement, and Family with infant or younger children. Berdasarkan data sekunder dan pengamatan, segmentasi Youth Travelers bersifat sangat sensitif terhadap harga dan pengguna internet yang sangat aktif, lalu segmentasi Retirement and Family lebih berorientasi pada kenyamanan fasilitas dan privacy. Terakhir, Honeymooners merupakan kombinasi dari keduanya. Kata kunci: Produk Wisata, Prawirotaman, Persepsi, Karakter, Wisatawan Mancanegara

  11. ANALISIS PENGARUH KREDIBILITAS MEREK TERHADAP SENSITIVITAS HARGA KONSUMEN

    Directory of Open Access Journals (Sweden)

    Anik - Kusmintarti

    2012-05-01

    Full Text Available ABSTRAKS   Informasi yang tidak sempurna dan tidak simetris mengakibatkan timbulnya ketidakpastian yang dihadapi konsumen tentang atribut dan/ atau manfaat apa yang didapat dari sebuah produk.  Dalam kondisi seperti ini penting bagi perusahaan untuk menyampaikan informasi terpercaya kepada konsumen, yaitu informasi yang jujur dan perusahaan harus bersedia dan mampu menyampaikan apa yang telah dijanjikan. Merek yang kredibel berpengaruh terhadap  kesan kualitas, resiko yang diterima dan biaya informasi. Kemudian kesan kualitas, resiko yang diterima dan biaya informasi akan mempengaruhi manfaat yang diharapkan.  Dan selanjutnya akan mempengaruhi sensitivitas harga konsumen. Populasi dalam penelitian ini adalah wanita dewasa yang berdomisili di kota Malang dan sampelnya adalah wanita berumur 17 sampai sengan 45 tahun yang menggunakan shampo Anti Ketombe dari satu atau lebih merek-merek yang sedang diteliti. Jumlah responden 100 orang dan metode pengambilan sampel yang digunakan adalah nonprobability sampling, dan teknik pengambilan sampel yang digunakan adalah quota sampling. Uji empiris menggunakan Metode Analisis Jalur. Hasil penelitian menunjukkan bahwa kredibilitas merek berpengaruh terhadap sensitivitas harga konsumen. Selain itu kredibilitas merek berpengaruh secara tak langsung terhadap sensitivitas harga konsumen melalui kesan kualitas dan manfaat yang diharapkan; Kredibilitas merek berpengaruh tak langsung terhadap sensitivitas harga konsumen melalui melalui biaya informasi dan manfaat yang diharapkan. Pengaruh kredibilitas merek terhadap sensitivitas harga konsumen melalui resiko yang dirasakan dan manfaat yang diharapkan tidak signifikan. Temuan ini tidak konsisten dengan temuan dari penelitian yang dilakukan Erdem dan Swait (1998. Hal ini menurut peneliti disebabkan oleh responden dari penelitian yang peneliti lakukan cenderung mudah percaya dengan informasi-informasi yang ada disekelilingnya dan kurang peduli dengan keberadaan

  12. Analisis Model Relasional Jejaring Sebagai Katalisator Dalam Membangun Kinerja Bisnis

    Directory of Open Access Journals (Sweden)

    Ahmad Sidiq

    2018-01-01

    Full Text Available Abstrak Kesuksesan entrepreneur diukur dari kehandalannya menggabungkan atau mengkombinasikan aset berwujud dan tak berwujud yang dimiliki UKM sehingga mampu mendobrak semua hambatan yang dihadapi UKM yaitu keterbatasan akses pasar dan akses modal, sumber daya yang cenderung rendah, minimnya modal kerja maupun rendahnya kemampuan untuk memanfaatkan peluang pasar yang ada. Berbagai perilaku yang digunakan entrepreneur dalam menjalankan bisnisnya maupun berinteraksi dengan stakeholder mengarah pada relasional jejaring dan kompetensi sosial yang harus dimiliki oleh seorang entrepreneur. Penelitian ini bertujuan untuk menguji faktor yang mampu memperluas relasional jejaring entrepreneur dan faktor konsekuensi dari adanya relasional jejaring yang dimiliki oleh seorang entrepreneur. Faktor-faktor tersebut sangat berkaitan dengan pencapaian kinerja bisnis pada UKM. Populasi penelitian ini adalah UKM sektor manufaktur di wilayah Surakarta dengan sampel sebanyak 127 UKM. Metode pemilihahan sampel adalah convenience sampling dan dianalisis menggunakan Structural Equation Modeling (SEM dengan bantuan Partial Least Square (PLS dalam pengolahan data penelitian. Hasil analisis data menunjukkan kinerja bisnis dapat dijelaskan oleh kompetensi sosial, relasional jejaring dan orientasi berbagi pengetahuan sebesar 69.5%. Adapun hasil pengujian hipotesis menunjukkan kinerja bisnis dipengaruhi oleh kompetensi sosial, relasional jejaring dan orientasi berbagi pengetahuan. Selain itu kompetensi sosial berpengaruh pada relasional jejaring dan relasional jejaring memberi pengaruh pada orientasi berbagi pengetahuan.  Kata Kunci : kompetensi sosial, relasional jejaring, berbagi pengetahuan, kinerja bisnis Abstract The success of the entrepreneur is measured by reliability merge or combine the tangible assets and intangible owned by SMEs so as to break down all the barriers faced by SMEs is limited access to markets and access to capital, resources tend to be low, the

  13. ANALISIS KEMAMPUAN MENATA ARSIP SISWA JURUSAN ADMINISTRASI PERKANTORAN

    Directory of Open Access Journals (Sweden)

    Bunga Aprilia Kartini

    2016-02-01

    Full Text Available Salah satu kemampuan yang harus dimiliki Program Administrasi Perkantoran adalah kompetensi dasar penataan dokumen. Kompetensi yang diharapkan dari kompetensi penataan dokumen adalah dapat menyimpan dan menemukan kembali dokumen/arsip sesuai dengan sistem yang diterapkan dalam perusahaan. Pembelajaran yang terjadi di SMK PGRI 2 Salatiga, siswa jurusan Administrasi Perkantoran tidak mendapatkan praktik menemukan kembali arsip/dokumen serta tidak ada laboratorium khusus kearsipan. Hal ini tentu akan mempengaruhi kemampuan lulusan dari siswa-siswanya. Kemampuan tersebut akan berujung pada kemampuan lulusan dalam memenuhi standar kerja suatu perusahaan atau organisasi. Populasi dalam penelitian ini yaitu seluruh siswa kelas XI Jurusan Administrasi Perkantoran SMK PGRI 2 Salatiga yang terdiri dari 2 kelas dengan jumlah 64 siswa. Penelitian ini merupakan penelitian deskriptif kuantitatif dengan teknik pengumpulan data menggunakan metode wawancara, observasi dan kuesioner. Teknik analisis data yang digunakan adalah dengan angka indeks. Hasil Penelitian menunjukan bahwa rata-rata kemampuan siswa dalam menata dokumen/arsip dengan angka indeks adalah sebesar 68,85 hal tersebut menunjukkan bahwa siswa umumnya memiliki kemampuan yang sedang, walaupun secara teori pemahaman siswa sudah cukup baik namun secara praktik siswa masih memiliki kekurangan yaitu siswa kurang menguasai dalam praktik mengindeks, memberikan kode penyimpanan, pencatatan kartu pinjam arsip, membaca kode penyimpanan dan prosedur penemuan kembali arsip/dokumen. Siswa juga belum diajarkan praktik penyimpanan sistem wilayah, sistem nomor dan sistem subjek/perihal sehingga kemampuan meraka dalam sistem penyimpanan tersebut masih kurang serta siswa juga belum diajarkan praktik penemuan kembali surat/arsip. Office Administration program is one of the must have skills that are the basis of the competencies document setup. Learning happens in SMK PGRI 2 Salatiga , students in Administrative

  14. ANALISIS PENGARUH KONSUMSI ROKOK DENGAN KEMISKINAN DI PROVINSI JAWA TENGAH

    Directory of Open Access Journals (Sweden)

    Agnes Marisca Dian Sari

    2017-06-01

    Full Text Available Tujuan penelitian ini adalah untuk mengetahui pengaruh kemiskinan dengan konsumsi rokok di Jawa Tengah tahun 2013 dan mengetahui pengaruh pajak rokok dengan konsumsi rokok di Jawa Tengah tahun 2013. Jenis data yang digunakan adalah data sekunder. Metode analisis yang digunakan ialah regresi Ordinary Least Square (OLS dengan data cross section tahun 2013 di Provinsi Jawa Tengah dengan 35 Kabupaten/Kota. Hasil penelitian ini adalah ketika Garis kemiskinan naik maka akan menaikan konsumsi rokok. Variabel Garis kemiskinan signifikan dan positif terhadap konsumsi rokok di Jawa Tengah tahun 2013.Variabel pajak rokok bernilai positif namun tidak signifikan. Variabel Kemiskinan dan pajak rokok mampu menjelaskan tingkat konsumsi rokok sebesar 0.1263% dan sisanya dijelaskan oleh variabel lain. F-statistik sebesar 2,31. F-tabel sebesar 1,37, dan t-tabel sebesar 2,034.Hasil penelitian dapat disimpulkan adanya pengaruh antara konsumsi rokok dengan kemiskinan di Jawa Tengah tahun 2013. Ketika konsumsi rokok di Jawa Tengah naik maka meningkatkan kemiskinan di Jawa Tengah pada Tahun 2013 dan pengaruh antara konsumsi rokok dan pajak rokok di Jawa Tengah pada tahun 2013 tidak signifikan tapi bernilai positif. Artinya kebijakan pajak di Jawa Tengah belum mampu untuk mengurangi konsumsi rokok di Jawa Tengah pada tahun 2013. Meskipun sudah ada pajak rokok namun konsumsi rokok tetap terus meningkat. The aims of this research were to find out the effects of poverty on cigarette consumption in Central Java in 2013 and to recognize the effects of tax cigarette on cigarette consumption in Central Java in 2013. The type of the data used was secondary data. The analysis method used was the regression of Ordinary Least Square (OLS with the cross section data of 2013 in 35 Districts of Central Java Province.The research results show that when the Poverty Line increases, it increases cigarette consumption. The variable on Poverty Line has effect on cigarette consumption in

  15. ANALISIS DAYA SAING EKSPOR SEKTOR UNGGULAN DI JAWA TENGAH

    Directory of Open Access Journals (Sweden)

    Wiwit Santi Wahyuningsih

    2017-06-01

    Full Text Available Penelitian ini bertujuan untuk mengidentifikasi industri unggulan yang ada di Jawa Tengah, dan kemudian industri unggulan tersebut diidentifikasi mana saja yang mempunyai daya saing ekspor. Penelitian ini menggunakan data PDRB Jawa Tengah dan PDB Tahun 2010-2015, Tabel Input Output Jawa Tengah Tahun 2013, serta data Ekspor-Impor Jawa Tengah Tahun 1997-2015. Data tersebut diperoleh dari data sekunder, yaitu dengan memanfaatkan data yang telah tersedia pada instansi terkait. Penelitian ini mengunakan alat analisis Indeks Daya Penyebaran (IDP, Indeks Derajat Kepekaan (IDK dan Revealed Comparative Advantage (RCA. Dari hasil IDP dan IDK terdapat 9 industri unggulan di Jawa Tengah yaitu industri pengolahan dan pengawetan ikan, industri minyak dan lemak, industri penggilingan padi, industri tepung terigu dan tepung lainnya, industri makanan ternak, industri pemintalan, industri tekstil, industri kayu dan bahan bangunan dari kayu, serta industri karet dan barang dari karet. Tetapi dari 9 industri unggulan tersebut yang memiliki daya saing ekspor tinggi hanya ada 3 industri yaitu industri dengan IDP>1, IDK>1 dan RCA>1 yang meliputi industri pemintalan, industri tekstil, dan industri kayu dan bahan bangunan dari kayu. Dari penelitian ini dapat disimpulkan bahwa sektor industri yang dapat diandalkan untuk meningkatkan pertumbuhan ekonomi melalui ekspor dan memiliki daya saing ekspor yang sangat bagus serta memilki harga jual tinggi yaitu hanya industri pemintalan, industri tekstil, dan industri kayu dan bahan bangunan dari kayu. Maka dari itu sebaiknya kebijakan pemerintah lebih ditekankan pada sektor hulu dan sektor hilir dari industri-industri tersebut. This research’s aim is to identify the leading manufactures in central Java then identify which of those industries have the export competitiveness. This study used data of Central Java’s Gross Domestic Regional Product (GDRP and Gross National Product (GNP on 2010-2015, Input Output Table on 2013, as

  16. Reactor core of FBR type reactor

    International Nuclear Information System (INIS)

    Hayashi, Hideyuki; Ichimiya, Masakazu.

    1994-01-01

    A reactor core is a homogeneous reactor core divided into two regions of an inner reactor core region at the center and an outer reactor core region surrounding the outside of the inner reactor core region. In this case, the inner reactor core region has a lower plutonium enrichment degree and less amount of neutron leakage in the radial direction, and the outer reactor core region has higher plutonium enrichment degree and greater amount of neutron leakage in the radial direction. Moderator materials containing hydrogen are added only to the inner reactor core fuels in the inner reactor core region. Pins loaded with the fuels with addition of the moderator materials are inserted at a ratio of from 3 to 10% of the total number of the fuel pins. The moderator materials containing hydrogen comprise zirconium hydride, titanium hydride, or calcium hydride. With such a constitution, fluctuation of the power distribution in the radial direction along with burning is suppressed. In addition, an absolute value of the Doppler coefficient can be increased, and a temperature coefficient of coolants can be reduced. (I.N.)

  17. Reactor core for LMFBR type reactors

    International Nuclear Information System (INIS)

    Masumi, Ryoji; Azekura, Kazuo; Kurihara, Kunitoshi; Bando, Masaru; Watari, Yoshio.

    1987-01-01

    Purpose: To reduce the power distribution fluctuations and obtain flat and stable power distribution throughout the operation period in an LMFBR type reactor. Constitution: In the inner reactor core region and the outer reactor core region surrounding the same, the thickness of the inner region is made smaller than the axial height of the reactor core region and the radial width thereof is made smaller than that of the reactor core region and the volume thereof is made to 30 - 50 % for the reactor core region. Further, the amount of the fuel material per unit volume in the inner region is made to 70 - 90 % of that in the outer region. The difference in the neutron infinite multiplication factor between the inner region and the outer region is substantially constant irrespective of the burnup degree and the power distribution fluctuation can be reduced to about 2/3, by which the effect of thermal striping to the reactor core upper mechanisms can be moderated. Further, the maximum linear power during operation can be reduced by 3 %, by which the thermal margin in the reactor core is increased and the reactor core fuels can be saved by 3 %. (Kamimura, M.)

  18. Tokamak reactor studies

    International Nuclear Information System (INIS)

    Baker, C.C.

    1981-01-01

    This paper presents an overview of tokamak reactor studies with particular attention to commercial reactor concepts developed within the last three years. Emphasis is placed on DT fueled reactors for electricity production. A brief history of tokamak reactor studies is presented. The STARFIRE, NUWMAK, and HFCTR studies are highlighted. Recent developments that have increased the commercial attractiveness of tokamak reactor designs are discussed. These developments include smaller plant sizes, higher first wall loadings, improved maintenance concepts, steady-state operation, non-divertor particle control, and improved reactor safety features

  19. Reactor Physics Programme

    International Nuclear Information System (INIS)

    De Raedt, C.

    2000-01-01

    The Reactor Physics and Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis on reactor fuel. This expertise is applied within the Reactor Physics and MYRRHA Research Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments. Progress and achievements in 1999 in the following areas are reported on: (1) investigations on the use of military plutonium in commercial power reactors; (2) neutron and gamma calculations performed for BR-2 and for other reactors; (3) the updating of neutron and gamma cross-section libraries; (4) the implementation of reactor codes; (6) the management of the UNIX workstations; and (6) fuel cycle studies

  20. Reactor Physics Programme

    Energy Technology Data Exchange (ETDEWEB)

    De Raedt, C

    2000-07-01

    The Reactor Physics and Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis on reactor fuel. This expertise is applied within the Reactor Physics and MYRRHA Research Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments. Progress and achievements in 1999 in the following areas are reported on: (1) investigations on the use of military plutonium in commercial power reactors; (2) neutron and gamma calculations performed for BR-2 and for other reactors; (3) the updating of neutron and gamma cross-section libraries; (4) the implementation of reactor codes; (6) the management of the UNIX workstations; and (6) fuel cycle studies.

  1. Las fábricas de la charla en Chile: apuntes preliminares sobre la materialidad y la subjetividad del trabajo en los call centers

    Directory of Open Access Journals (Sweden)

    Areli Escobar Salazar

    2013-06-01

    Full Text Available Este artículo expone los resultados preliminares de la investigación doctoral en Antropología, orientada a conocer la materialidad y la subjetividad del trabajo de los call centers en Chile. Un salario definido por metas inalcanzables, el maltrato, el cansancio de nuevo tipo, la doble extracción del valor productivo y reproductivo de las mujeres trabajadoras y su entorno familiar, la explotación de las capacidades subjetivas, entre otros aspectos, dan cuenta de las nuevas formas que asume la precarización del trabajo. Las fábricas de la charla en Chile son un claro ejemplo de las formas que asume la organización del trabajo en el escenario laboral contemporáneo.

  2. Actividad farmacológica preliminar del fruto de Bromelia pinguin L. (piña de ratón

    Directory of Open Access Journals (Sweden)

    Juan Abreu Payrol

    2001-04-01

    Full Text Available Se presentan los resultados del estudio farmacológico preliminar de un extracto hidroalcohólico concentrado de los frutos de Bromelia pinguin L. (piña de ratón mediante bioensayos sencillos y confiables. Se determinó la toxicidad frente a Artemia salina Leach, que resultó muy baja. Se probó la actividad antihelmíntica contra Lombricus terrestri, con resultados relevantes. El extracto no mostró actividad contra diversas cepas de hongos y bacterias.The results of the preliminary pharmacological study of a concentrated hydroalcoholic extract from the fruits of Bromelia pinguin L. ("piña de ratón" by simple and reliable bioassays are presented. The toxicity against Artemia salina Leach, which was very low, was determined. The anthelmintic activity against Lombricus terrestri was proved with remarkable results. No activity of the extract against the strains of fungi and bacteria was observed.

  3. LA FALTA DE AGOTAMIENTO DE RECURSOS INTERNOS COMO EXCEPCIÓN PRELIMINAR ANTE LA COMISIÓN INTERAMERICANA DE DERECHOS HUMANOS

    Directory of Open Access Journals (Sweden)

    Ángela Patricia Bernal Guzmán

    2012-01-01

    Full Text Available El presente artículo analizará la excepción preliminar "Falta de agotamiento de recursos internos" como mecanismo de defensa estatal invocada ante la Comisión Interamericana de Derechos Humanos (CIDH. Se demostrarán las falencias o errores cometidos por los agentes estatales en la argumentación de la excepción, la cual ha sido superflua y equivoca al entregar argumentos definidos de forma previa por el órgano interamericano como improcedentes, en razón a su contradicción con los estándares internacionales de protección de los Derechos Humanos en el sistema regional.

  4. Undergraduate reactor control experiment

    International Nuclear Information System (INIS)

    Edwards, R.M.; Power, M.A.; Bryan, M.

    1992-01-01

    A sequence of reactor and related experiments has been a central element of a senior-level laboratory course at Pennsylvania State University (Penn State) for more than 20 yr. A new experiment has been developed where the students program and operate a computer controller that manipulates the speed of a secondary control rod to regulate TRIGA reactor power. Elementary feedback control theory is introduced to explain the experiment, which emphasizes the nonlinear aspect of reactor control where power level changes are equivalent to a change in control loop gain. Digital control of nuclear reactors has become more visible at Penn State with the replacement of the original analog-based TRIGA reactor control console with a modern computer-based digital control console. Several TRIGA reactor dynamics experiments, which comprise half of the three-credit laboratory course, lead to the control experiment finale: (a) digital simulation, (b) control rod calibration, (c) reactor pulsing, (d) reactivity oscillator, and (e) reactor noise

  5. Reactor System Design

    International Nuclear Information System (INIS)

    Chi, S. K.; Kim, G. K.; Yeo, J. W.

    2006-08-01

    SMART NPP(Nuclear Power Plant) has been developed for duel purpose, electricity generation and energy supply for seawater desalination. The objective of this project IS to design the reactor system of SMART pilot plant(SMART-P) which will be built and operated for the integrated technology verification of SMART. SMART-P is an integral reactor in which primary components of reactor coolant system are enclosed in single pressure vessel without connecting pipes. The major components installed within a vessel includes a core, twelve steam generator cassettes, a low-temperature self pressurizer, twelve control rod drives, and two main coolant pumps. SMART-P reactor system design was categorized to the reactor coe design, fluid system design, reactor mechanical design, major component design and MMIS design. Reactor safety -analysis and performance analysis were performed for developed SMART=P reactor system. Also, the preparation of safety analysis report, and the technical support for licensing acquisition are performed

  6. Fusion reactor design studies

    International Nuclear Information System (INIS)

    Emmert, G.A.; Kulcinski, G.L.; Santarius, J.F.

    1990-01-01

    This report discusses the following topics on the ARIES tokamak: systems; plasma power balance; impurity control and fusion ash removal; fusion product ripple loss; energy conversion; reactor fueling; first wall design; shield design; reactor safety; and fuel cost and resources

  7. Nuclear reactors; graphical symbols

    International Nuclear Information System (INIS)

    1987-11-01

    This standard contains graphical symbols that reveal the type of nuclear reactor and is used to design graphical and technical presentations. Distinguishing features for nuclear reactors are laid down in graphical symbols. (orig.) [de

  8. Control for nuclear reactor

    International Nuclear Information System (INIS)

    Ash, E.B.; Bernath, L.; Facha, J.V.

    1980-01-01

    A nuclear reactor is provided with several hydraulically-supported spherical bodies having a high neutron absorption cross section, which fall by gravity into the core region of the reactor when the flow of supporting fluid is shut off. (auth)

  9. Hybrid plasmachemical reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lelevkin, V. M., E-mail: lelevkin44@mail.ru; Smirnova, Yu. G.; Tokarev, A. V. [Kyrgyz-Russian Slavic University (Kyrgyzstan)

    2015-04-15

    A hybrid plasmachemical reactor on the basis of a dielectric barrier discharge in a transformer is developed. The characteristics of the reactor as functions of the dielectric barrier discharge parameters are determined.

  10. Ship propulsion reactors technology

    International Nuclear Information System (INIS)

    Fribourg, Ch.

    2002-01-01

    This paper takes the state of the art on ship propulsion reactors technology. The french research programs with the corresponding technological stakes, the reactors specifications and advantages are detailed. (A.L.B.)

  11. Guidebook to nuclear reactors

    International Nuclear Information System (INIS)

    Nero, A.V. Jr.

    1976-05-01

    A general introduction to reactor physics and theory is followed by descriptions of commercial nuclear reactor types. Future directions for nuclear power are also discussed. The technical level of the material is suitable for laymen

  12. continuous stirred tank reactor (CSTR)

    African Journals Online (AJOL)

    AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search ... stirred tank reactor (CSTR) and the small and large intestines as plug flow reactor (PFR) ... from the two equations are used for the reactor sizing of the modeled reactors.

  13. Reactor physics aspects of CANDU reactors

    International Nuclear Information System (INIS)

    Critoph, E.

    1980-01-01

    These four lectures are being given at the Winter Course on Nuclear Physics at Trieste during 1978 February. They constitute part of the third week's lectures in Part II: Reactor Theory and Power Reactors. A physical description of CANDU reactors is given, followed by an overview of CANDU characteristics and some of the design options. Basic lattice physics is discussed in terms of zero energy lattice experiments, irradiation effects and analytical methods. Start-up and commissioning experiments in CANDU reactors are reviewed, and some of the more interesting aspects of operation discussed - fuel management, flux mapping and control of the power distribution. Finally, some of the characteristics of advanced fuel cycles that have been proposed for CANDU reactors are summarized. (author)

  14. Molten salt breeder reactor

    International Nuclear Information System (INIS)

    1977-01-01

    MSBR Study Group formed in October 1974 has studied molten salt breeder reactor and its various aspects. Usage of a molten salt fuel, extremely interesting as reactor chemistry, is a great feature to MSBR; there is no need for separate fuel making, reprocessing, waste storage facilities. The group studied the following, and these results are presented: molten salt technology, molten salt fuel chemistry and reprocessing, reactor characteristics, economy, reactor structural materials, etc. (Mori, K.)

  15. Zero energy reactor 'RB'

    Energy Technology Data Exchange (ETDEWEB)

    Popovic, D; Takac, S; Markovic, H; Raisic, N; Zdravkovic, Z; Radanovic, Lj [Boris Kidric Institute of Nuclear Sciences, Vinca, Beograd (Yugoslavia)

    1959-03-15

    In 1958 the zero energy reactor RB was built with the purpose of enabling critical experiments with various reactor systems to be carried out. The first core assembly built in this reactor consists of heavy water as moderator and natural uranium metal as fuel. In order to be able to obtain very accurate results when measuring the main characteristics of the assembly the reactor was built as a completely bare system. (author)

  16. Reactor utilization, Annex A

    International Nuclear Information System (INIS)

    Martinc, R.; Stanic, A.

    1984-01-01

    Reactor was operated until August 1984 due to prohibition issued by the Ministry since the reactor does not have the emergency cooling system nor special filters in the ventilation system yet. This means that the operation plan was fulfilled by 69%. This annex includes detailed tables containing data about utilization of reactor experimental channels, irradiated samples, as well as interruptions of operation. Detailed data about reactor power during this period are shown as well

  17. PUSPATI TRIGA Reactor

    International Nuclear Information System (INIS)

    Masood, Z.

    2016-01-01

    The PUSPATI TRIGA Reactor is the only research reactor in Malaysia. This 1 MW TRIGA Mk II reactor first reached criticality on 28 June 1982 and is located at the Malaysian Nuclear Agency premise in Bangi, Malaysia. This reactor has been mainly utilised for research, training and education and isotope production. Over the years several systems have been refurbished or modernised to overcome ageing and obsolescence problems. Major achievements and milestones will also be elaborated in this paper. (author)

  18. Nuclear reactor shutdown system

    International Nuclear Information System (INIS)

    Mangus, J.D.; Cooper, M.H.

    1982-01-01

    An improved nuclear reactor shutdown system is described comprising a temperature sensitive device connected to control the electric power supply to a magnetic latch holding a body of a neutron absorbing material. The temperature sensitive device is exposed to the reactor coolant so that when the reactor coolant temperature rises above a specific level, the temperature sensitive device will cause deenergization of the magnetic latch to allow the body of neutron absorbing material to enter the reactor core. (author)

  19. As transformações no mundo do trabalho e a questão da saúde: algumas reflexões preliminares Las transformaciones en el mundo del trabajo y la salud: algunas reflexiones preliminares The transformations in the world of work and health: some preliminary reflections

    Directory of Open Access Journals (Sweden)

    Luciane Prado Kantorski

    1997-04-01

    Full Text Available Neste artigo realizo algumas reflexões preliminares sobre as transformações no mundo do trabalho e a saúde. Para isto inicio o estudo colocando algumas dimensões essenciais do trabalho como categoria central para analisar a sociedade, a partir da concepção marxista. A seguir resgato nas transformações do mundo do trabalho a especificidade da saúde refletindo sobre a questão do cuidado e da organização dos trabalhadores de saúde.En este artículo realizo algunas reflexiones preliminares sobre las transformaciones en el mundo del trabajo y la salud. Para esto, inicio el estudio colocando algunas dimensiones esenciales del trabajo como categoría central, para analisar la sociedad, a partir de la concepción marxista. Enseguida rescato en las transformaciones del mundo del trabajo la especificidad de la salud trayendo para la reflexión el cuidado y la organización de los trabajadores de la salud.In this work, I make some preliminary reflections about the transformations in the world of work and health. For this purpose, I start this study discussing essential dimensions of the work like the central category to analyse the society based on the Marxist conception. Following, I investigate transformations in the world of work and the specificity of health to the related reflection about care and the organization of health workers.

  20. The fast reactor

    International Nuclear Information System (INIS)

    1980-02-01

    The subject is discussed as follows: brief description of fast reactors; advantage in conserving uranium resources; experience, in UK and elsewhere, in fast reactor design, construction and operation; safety; production of plutonium, security aspects; consideration of future UK fast reactor programme. (U.K.)

  1. Mirror fusion reactor design

    International Nuclear Information System (INIS)

    Neef, W.S. Jr.; Carlson, G.A.

    1979-01-01

    Recent conceptual reactor designs based on mirror confinement are described. Four components of mirror reactors for which materials considerations and structural mechanics analysis must play an important role in successful design are discussed. The reactor components are: (a) first-wall and thermal conversion blanket, (b) superconducting magnets and their force restraining structure, (c) neutral beam injectors, and (d) plasma direct energy converters

  2. Towards nuclear fusion reactors

    International Nuclear Information System (INIS)

    1993-11-01

    The results of nuclear fusion researches in JAERI are summarized. In this report, following themes are collected: the concept of fusion reactor (including ITER), fusion reactor safety, plasma confinement, fusion reactor equipment, and so on. Includes glossary. (J.P.N.)

  3. Rotating reactors : a review

    NARCIS (Netherlands)

    Visscher, F.; Schaaf, van der J.; Nijhuis, T.A.; Schouten, J.C.

    2013-01-01

    This review-perspective paper describes the current state-of-the-art in the field of rotating reactors. The paper has a focus on rotating reactor technology with applications at lab scale, pilot scale and industrial scale. Rotating reactors are classified and discussed according to their geometry:

  4. Refuelling nuclear reactors

    International Nuclear Information System (INIS)

    Stacey, J.; Webb, J.; White, W.P.; McLaren, N.H.

    1981-01-01

    An improved nuclear reactor refuelling machine is described which can be left in the reactor vault to reduce the off-load refuelling time for the reactor. The system comprises a gripper device rangeable within a tubular chute, the gripper device being movable by a pantograph. (U.K.)

  5. Reactor power measuring device

    International Nuclear Information System (INIS)

    Izumi, Mikio; Sano, Yuji; Seki, Eiji; Yoshida, Toshifumi; Ito, Toshiaki.

    1993-01-01

    The present invention provides a self-powered long detector having a sensitivity over the entire length of a reactor core as an entire control rod withdrawal range of a BWR type reactor, and a reactor power measuring device using a gamma ray thermometer which scarcely causes sensitivity degradation. That is, a hollow protection pipe is disposed passing through the reactor core from the outside of a reactor pressure vessel. The self-powered long detectors and the gamma ray thermometers are inserted and installed in the protection pipe. An average reactor power in an axial direction of the reactor relative to a certain position in the horizontal cross section of the reactor core is determined based on the power of the self-powered long detector over the entire length of the reactor core. Since the response of the self-powered detector relative to a local power change is rapid, the output is used as an input signal to a safety protection device of the reactor core. Further, a gamma ray thermometer secured in the reactor and having scarce sensitivity degradation is used instead of an incore travelling neutron monitor used for relative calibration of an existent neutron monitor secured in the reactor. (I.S.)

  6. Ulysse, mentor reactor

    International Nuclear Information System (INIS)

    Bouquin, B.; Rio, I.; Safieh, J.

    1997-01-01

    On July 23, 1961, the ULYSSE reactor began its first power rise. Designed at that time to train nuclear engineering students and reactor operators, this reactor still remains an indispensable tool for nuclear teaching and a choice instrument for scientists. (author)

  7. Mechanical spectral shift reactor

    International Nuclear Information System (INIS)

    Sherwood, D.G.; Wilson, J.F.; Salton, R.B.; Fensterer, H.F.

    1981-01-01

    A mechanical spectral shift reactor comprises apparatus for inserting and withdrawing water displacer elements from the reactor core for selectively changing the water-moderator volume in the core thereby changing the reactivity of the core. The apparatus includes drivemechanisms for moving the displacer elements relative to the core and guide mechanisms for guiding the displayer rods through the reactor vessel

  8. Mechanical spectral shift reactor

    International Nuclear Information System (INIS)

    Sherwood, D.G.; Wilson, J.F.; Salton, R.B.; Fensterer, H.F.

    1982-01-01

    A mechanical spectral shift reactor comprises apparatus for inserting and withdrawing water displacer elements from the reactor core for selectively changing the water-moderator volume in the core thereby changing the reactivity of the core. The apparatus includes drive mechanisms for moving the displacer elements relative to the core and guide mechanisms for guiding the displacer rods through the reactor vessel. (author)

  9. Preliminary Characterization of the Liquid Discharge of the Mexico Hospital; Caracterizacion Preliminar de la Descarga Liquida del Hospital Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez Rojas, A

    2001-07-01

    constituye un grave problema a nivel nacional. En este trabajo se realiza una caracterizacion preliminar de la descarga liquida del Hospital Mexico. Para ello se analizaron diferentes puntos de vertido dentro de la institucion, ellos son : Lavanderia, cocina central, Laboratorio Clinico, Rayos X, Laboratorio de Biomasa, Morgue y la descarga final del hospital. Esto con el fin de conocer el manejo de los desechos liquidos en el centro de salud, la calidad sanitaria de estos vertidos y su influencia en las aguas crudas del Hospital Mexico en el cuerpo receptor. Para este estudio primero se coordino con el personal de cada departamento para conocer sobre el manejo y tipo de residuos liquidos que son descargados al sistema de tuberias. Posteriormente se realizaron las pruebas fisico-quimicas y biologicas con base en dos muestreos compuestos realizados los dias 26 de octubre y 4 de noviembre de 1998. Entre las pruebas realizadas se tienen: pH, DBO, DQO, SAAM, Grasas y Aceites, Temperatura, Nitrogeno y Coliformes Fecales, dependiendo de las caracteristicas de su punto de procedencia. Al final del estudio, se evaluaron los resultados obtenidos para cada punto de vertido estudiado y luego se analizo la influencia de estos focos sobre la calidad de las aguas crudas del hospital, las cuales descargan en una quebrada localizada al costado noroeste de las instalaciones. Los resultados obtenidos permiten conocer preliminarmente la caracterizacion de la descarga liquida del Hospital Mexico y lo catalogan como una fuente de contaminacion. El Hospital requiere de una planta de tratamiento biologica para aquellos vertidos biodegradables, y de un sistema de tratamiento quimico para tratar ese tipo de productos, que son utilizados en los procesos propios de cada departamento; ademas se requiere tomar en cuenta medidas de reduccion de contaminacion que disminuyan la cantidad de desechos desde la fuente. (Author)

  10. ANALISIS KEBERADAAN BIDAN DESA DAN DUKUN BAYI DI JAWA TIMUR

    Directory of Open Access Journals (Sweden)

    Mochamad Setyo Pramono

    2013-03-01

    through the course. Suggestion: Patterns midwife partnership with shamans only one way to improve the coverage of deliveries by health personnel. The approach must be done from two sides, which is also in the community. The abilityof midwives to promotive and preventive accordance with the local culture are factors in addition to the factors of education and knowledge in society itself. Key words: midwives, tradistional birth attendants, East Java ABSTRAK Latar Belakang: Tujuan MDGs yang berupa meningkatkan kesehatan ibu, salah satu indikatornya adalah proporsi pertolongan kelahiran oleh tenaga kesehatan terlatih. Terkait dengan hal tersebut yang menjadi ujung tombak dilapangan adalah bidan desa. Kehadiran profesi bidan bukan berada di dalam lahan yang kosong, karena secara tradisi keberadaan dukun bayi telah ada terlebih dahulu. Pada kondisi geografis dan sosial masyarakat yang beragam, keberadaan mereka bisa menjadi khazanah kekayaan budaya. Menjadi menarik ketika dua kepentingan yang sejalan tetapi berbeda latar belakang ini bertemu di lapangan. Bagaimana eksistensi mereka di masyarakat terutama di perdesaan yang tradisinya masih kuat. Metode: Penelitian ini merupakan gabungan penelitian kuantitatif dan kualitatif. Penelitian ini dilakukan pada tahun 2011 di empat kabupaten di Jawa Timur yaitu Sampang, Probolinggo, Jombang dan Madiun. Pemilihan kabupaten mengacu pada karakteristik masyarakat di Jawa Timur yaitu Madura, Pandalungan, Arek dan Mataraman. Pengumpulan data dilakukan dengan cara observasi dan wawancara mendalam, informannya adalah bidan desa dan dukun bayi pada tiap wilayah puskesmas terpilih. Data dianalisis dengan teknik analisis domain, kategorial dan komponensial, sehingga membentuk matriks atau tipologi. Hasil: Terdapat dikotomi bidan senior dan bidan muda. Bidan senior kebanyakan berasal dari luar daerah. Jumlahnya terbatas sementara cakupan wilayah yang luas, tidak jarang membuat mereka memilih tinggal di pusat kecamatan. Akibatnya, pelayanan

  11. Neutron behavior, reactor control, and reactor heat transfer. Volume four

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    Volume four covers neutron behavior (neutron absorption, how big are nuclei, neutron slowing down, neutron losses, the self-sustaining reactor), reactor control (what is controlled in a reactor, controlling neutron population, is it easy to control a reactor, range of reactor control, what happens when the fuel burns up, controlling a PWR, controlling a BWR, inherent safety of reactors), and reactor heat transfer (heat generation in a nuclear reactor, how is heat removed from a reactor core, heat transfer rate, heat transfer properties of the reactor coolant)

  12. Empleabilidad percibida en alumnos de los últimos años de la carrera de Licenciatura en Psicología, Psicopedagogía y Gestión de Recursos Humanos : Estudio preliminar

    OpenAIRE

    Alonso, Horacio Jorge; Izquierdo Rus, Tomás; Domínguez, Daniel Alberto

    2013-01-01

    El principal interés del presente trabajo es conocer con mayor precisión las expectativas de variables de empleabilidad en alumnos que a corto plazo se encontrarán buscando su inserción en el mercado laboral. Por su carácter preliminar solamente se incluye el análisis del resultado del cuestionario de una muestra parcial.

  13. Reactor as furnace and reactor as lamp

    International Nuclear Information System (INIS)

    Goldanskii, V.I.

    1992-01-01

    There are presented general characteristics of the following ways of transforming of nuclear energy released in reactors into chemical : ordinary way (i.e. trough the heat, mechanical energy and electricity); chemonuclear synthesis ; use of high-temperature fuel elements (reactor as furnace); use of the mixed nγ-radiation of reactors; use of the radiation loops; radiation - photochemical synthesis (reactor as lamp). Advantage and disadvantages of all above variants are compared. The yield of the primary product of fixation of nitrogen (nitric oxide NO) in reactor with the high-temperature (above ca. 1900degC) fuel elements (reactor-furnace) can exceed W ∼ 200 kg per gram of burned uranium. For the latter variant (reactor-lamp) the yield of chemical products can reach W ∼ 60 kg. per gram of uranium. Such values of W are close to or even strongly exceed the yields of chemical products for other abovementioned variants and - what is particularly important - are not connected to the necessity of archscrupulous removal of radioactive contamination of products. (author)

  14. Nuclear reactor physics

    CERN Document Server

    Stacey, Weston M

    2010-01-01

    Nuclear reactor physics is the core discipline of nuclear engineering. Nuclear reactors now account for a significant portion of the electrical power generated worldwide, and new power reactors with improved fuel cycles are being developed. At the same time, the past few decades have seen an ever-increasing number of industrial, medical, military, and research applications for nuclear reactors. The second edition of this successful comprehensive textbook and reference on basic and advanced nuclear reactor physics has been completely updated, revised and enlarged to include the latest developme

  15. Light water reactor safety

    CERN Document Server

    Pershagen, B

    2013-01-01

    This book describes the principles and practices of reactor safety as applied to the design, regulation and operation of light water reactors, combining a historical approach with an up-to-date account of the safety, technology and operating experience of both pressurized water reactors and boiling water reactors. The introductory chapters set out the basic facts upon which the safety of light water reactors depend. The central section is devoted to the methods and results of safety analysis. The accidents at Three Mile Island and Chernobyl are reviewed and their implications for light wate

  16. Fundamentals of reactor chemistry

    International Nuclear Information System (INIS)

    Akatsu, Eiko

    1981-12-01

    In the Nuclear Engineering School of JAERI, many courses are presented for the people working in and around the nuclear reactors. The curricula of the courses contain also the subject material of chemistry. With reference to the foreign curricula, a plan of educational subject material of chemistry in the Nuclear Engineering School of JAERI was considered, and the fundamental part of reactor chemistry was reviewed in this report. Since the students of the Nuclear Engineering School are not chemists, the knowledge necessary in and around the nuclear reactors was emphasized in order to familiarize the students with the reactor chemistry. The teaching experience of the fundamentals of reactor chemistry is also given. (author)

  17. Generation III+ Reactor Portfolio

    International Nuclear Information System (INIS)

    2010-03-01

    While the power generation needs of utilities are unique and diverse, they are all faced with the double challenge of meeting growing electricity needs while curbing CO 2 emissions. To answer these diverse needs and help tackle this challenge, AREVA has developed several reactor models which are briefly described in this document: The EPR TM Reactor: designed on the basis of the Konvoi (Germany) and N4 (France) reactors, the EPRTM reactor is an evolutionary model designed to achieve best-in-class safety and operational performance levels. The ATMEA1 TM reactor: jointly designed by Mitsubishi Heavy Industries and AREVA through ATMEA, their common company. This reactor design benefits from the competencies and expertise of the two mother companies, which have commissioned close to 130 reactor units. The KERENA TM reactor: Designed on the basis of the most recent German BWR reactors (Gundremmingen) the KERENA TM reactor relies on proven technology while also including innovative, yet thoroughly tested, features. The optimal combination of active and passive safety systems for a boiling water reactor achieves a very low probability of severe accident

  18. The fast breeder reactor

    International Nuclear Information System (INIS)

    Davis, D.A.; Baker, M.A.W.; Hall, R.S.

    1990-01-01

    Following submission of written evidence, the Energy Committee members asked questions of three witnesses from the Central Electricity Generating Board and Nuclear Electric (which will be the government owned company running nuclear power stations after privatisation). Both questions and answers are reported verbatim. The points raised include where the responsibility for the future fast reactor programme should lie, with government only or with private enterprise or both and the viability of fast breeder reactors in the future. The case for the fast reactor was stated as essentially strategic not economic. This raised the issue of nuclear cost which has both a construction and a decommissioning element. There was considerable discussion as to the cost of building a European Fast reactor and the cost of the electricity it would generate compared with PWR type reactors. The likely demand for fast reactors will not arrive for 20-30 years and the need to build a fast reactor now is questioned. (UK)

  19. One piece reactor removal

    International Nuclear Information System (INIS)

    Chia, Wei-Min; Wang, Song-Feng

    1993-01-01

    The strategy of Taiwan Research Reactor Renewal plan is to remove the old reactor block with One Piece Reactor Removal (OPRR) method for installing a new research reactor in original building. In this paper, the engineering design of each transportation works including the work method, the major equipments, the design policy and design criteria is described and discussed. In addition, to ensure the reactor block is safety transported for storage and to guarantee the integrity of reactor base mat is maintained for new reactor, operation safety is drawn special attention, particularly under seismic condition, to warrant safe operation of OPRR. ALARA principle and Below Regulatory Concern (BRC) practice were also incorporated in the planning to minimize the collective dose and the total amount of radioactive wastes. All these activities are introduced in this paper. (J.P.N.)

  20. Reactor power control device

    International Nuclear Information System (INIS)

    Ishii, Yoshihiko; Arita, Setsuo; Miyamoto, Yoshiyuki; Fukazawa, Yukihisa; Ishii, Kazuhiko

    1998-01-01

    The present invention provides a reactor power control device capable of enhancing an operation efficiency while keeping high reliability and safety in a BWR type nuclear power plant. Namely, the device of the present invention comprises (1) a means for inputting a set value of a generator power and a set value of a reactor power, (2) a means for controlling the reactor power to either smaller one of the reactor power corresponding to the set value of the generator power and the set value of the reactor power. With such procedures, even if the nuclear power plant is set so as to operate it to make the reactor power 100%, when the generator power reaches the upper limit, the reactor power is controlled with a preference given to the upper limit value of the generator power. Accordingly, safety and reliability are not deteriorated. The operation efficiency of the plant can be improved. (I.S.)

  1. Reactor power monitoring device

    International Nuclear Information System (INIS)

    Dogen, Ayumi; Ozawa, Michihiro.

    1983-01-01

    Purpose: To significantly improve the working efficiency of a nuclear reactor by reflecting the control rod history effect on thermal variants required for the monitoring of the reactor operation. Constitution: An incore power distribution calculation section reads the incore neutron fluxes detected by neutron detectors disposed in the reactor to calculate the incore power distribution. A burnup degree distribution calculation section calculates the burnup degree distribution in the reactor based on the thus calculated incore power distribution. A control rod history date store device supplied with the burnup degree distribution renews the stored control rod history data based on the present control rod pattern and the burnup degree distribution. Then, thermal variants of the nuclear reactor are calculated based on the thus renewed control rod history data. Since the control rod history effect is reflected on the thermal variants required for the monitoring of the reactor operation, the working efficiency of the nuclear reactor can be improved significantly. (Seki, T.)

  2. The Maple reactor project

    International Nuclear Information System (INIS)

    Malkoske, G.R.; Labrie, J.-P.

    2003-01-01

    MDS Nordion supplies the majority of the world's reactor-produced medical isotopes. These isotopes are currently produced in the NRU reactor at AECL's Chalk River Laboratories (CRL). Medical isotopes and related technology are relied upon around the world to prevent, diagnose and treat disease. The NRU reactor, which has played a key role in supplying medical isotopes to date, has been in operation for over 40 years. Replacing this aging reactor has been a priority for MDS Nordion to assure the global nuclear medicine community that Canada will continue to be a dependable supplier of medical isotopes. MDS Nordion contracted AECL to construct two MAPLE reactors dedicated to the production of medical isotopes. The MDS Nordion Medical Isotope Reactor (MMIR) project started in September 1996. This paper describes the MAPLE reactors that AECL has built at its CRL site, and will operate for MDS Nordion. (author)

  3. Fission reactors and materials

    International Nuclear Information System (INIS)

    Frost, B.R.T.

    1981-12-01

    The American-designed boiling water reactor and pressurized water reactor dominate the designs currently in use and under construction worldwide. As in all energy systems, materials problems have appeared during service; these include stress-corrosion of stainless steel pipes and heat exchangers and questions regarding crack behavior in pressure vessels. To obtain the maximum potential energy from our limited uranium supplies is is essential to develop the fast breeder reactor. The materials in these reactors are subjected to higher temperatures and neutron fluxes but lower pressures than in the water reactors. The performance required of the fuel elements is more arduous in the breeder than in water reactors. Extensive materials programs are in progress in test reactors and in large test rigs to ensure that materials will be available to meet these conditions

  4. Analisis Karakteristik Hujan untuk Pendugaan Debit Aliran Rencana Sungai Anafri di Kota Jayapura

    Directory of Open Access Journals (Sweden)

    Nurfaijin Nurfaijin

    2016-10-01

    Full Text Available ABSTRAK Penelitian ini bertujuan mengkaji karakteristik hujan wilayah DAS Anafri, menghitung debit aliran rencana, dan mengkaji kapasitas Sungai Anafri dalam merespon pengalihragaman hujan menjadi aliran permukaan. Kajian karakteristik hujan yakni ketebalan, intensitas, dan durasi hujan dilakukan dengan analisis statistik data hujan. Analisis distribusi data hujan diasumsikan sesuai dengan Metode Gumbel, sehingga untuk menentukan hujan periode ulang 2 tahun, 5 tahun, 10 tahun, dan 25 tahun menggunakan persamaan Gumbel. Hujan periode ulang digunakan untuk menghitung debit aliran rencana Metode Rasional. Analisis kapasitas sungai dilakukan dengan membandingkan debit aliran rencana dalam periode ulang T dengan kapasitas sungai. Penghitungan kapasitas sungai dilakukan pada penampang PI (bagian hulu, P2,dan P3 (bagian hilir. Debit aliran rencana yang digunakan dalam analisis kapasitas sungai adalah debit aliran Q25tahun (107,478 m³/detikdan 163,726 m³/detik. Hasil analisis menunjukan bahawa, terjadinya limpasan pada penampang sungai PI dan P2 pada saat menampung debit banjir yang diketahui penyebab utamanya adalah bank full capacity kecil, maka alternat! ( penanganan yang direkomendasikan adalah peninggian tanggul sungai. Analisis kapasitas sungai menggunakan debit banjir periode ulang 25 tahun menunjukan bahwa, terjadi limpasan pada lokasi penampang PI sampai P2 dengan panjang ruas 400 m yang terjadi pada tanggul sisi kanan dan tanggul sisi kiri dengan panjang ruas 40 meter. Limpasan terjadi setinggi 0,1 m hingga 1,6 m pada tanggul sisi kanan dan 0,1 m hingga 0,3 m pada tanggul sisi kiri, sehingga peninggian tanggul yang direkomendasikan adalah setinggi 1,6 mpada sisi kanan dan 0,3 m pada tanggul sisi kiri. ABSTRACT This study aims to examine the characteristics of rainfall watershed of Anafri calculate the flow rate plan, and assess the river capacity to respond diversion of rain to be surface runoff. In this study, the analysis of rainfall

  5. PENGKLASIFIKASIAN KARAKTERISTIK MAHASISWA BARU DALAM MEMILIH PROGRAM STUDI MENGGUNAKAN ANALISIS CLUSTER

    Directory of Open Access Journals (Sweden)

    Maxsi Ary

    2016-03-01

    Full Text Available Abstract - Object Clustering is one of the object mining process which aims to partition an existing object into one or more cluster objects based on their characteristics. Private Universities is one of the alternatives for the community colleges to meet increased demand for educational needs. The number of private colleges, especially in Bandung and generally in Indonesia is quite a lot. The number of colleges and universities means used to attract prospective students to be an interesting thing to study. As a reason for the intense competition in the search for new students, no doubt there are some ways that actually do not need to be done. Issues raised, namely classify new students of characteristics in selecting a course using cluster analysis. Data obtained from the questionnaire prospective new students in February 2014 Data processing using SPSS. The results using analysis SPSS aiming easier to describe the characteristics of each group of new students in choosing courses. Keywords: Clustering, characteristics of students, courses, cluster analysis Abstrak - Pengelompokan Objek (object clustering adalah salah satu proses dari objek mining yang bertujuan untuk mempartisi objek yang ada kedalam satu atau lebih cluster objek berdasarkan karakteristiknya. Perguruan tinggi swasta merupakan salah satu perguruan tinggi alternatif bagi masyarakat untuk menghadapi peningkatan permintaan terhadap kebutuhan pendidikan. Jumlah perguruan tinggi swasta khususnya di Bandung dan umumnya di Indonesia berjumlah cukup banyak. Jumlah perguruan tinggi dan cara yang digunakan perguruan tinggi untuk menarik minat calon mahasiswa menjadi hal yang menarik untuk dikaji. Sebagai alasan ketatnya persaingan dalam mencari calon mahasiswa baru, tidak dipungkiri terdapat beberapa cara yang dilakukan yang sebetulnya tidak perlu dilakukan. Persoalan yang dikemukakan yaitu mengklasifikasikan karakteristik mahasiawa baru dalam memilih program studi menggunakan analisis

  6. ANALISIS SPASIAL FAKTOR LINGKUNGAN PADA KEJADIAN DEMAM BERDARAH DENGUE DI KECAMATAN GENUK

    Directory of Open Access Journals (Sweden)

    Kartika Kirana

    2017-10-01

    Full Text Available ABSTRAK Kecamatan Genuk merupakan salah satu kecamatan yang endemis DBD di Kota Semarang. Secara berturut-turut sejak tahun 2012 hingga 2014, Kecamatan Genuk masuk sebagai tiga besar kasus DBD terbanyak. Salah satu faktor yang mempengaruhi kejadian DBD adalah faktor lingkungan. Tujuan penelitian ini adalah untuk mengetahui gambaran dari hasil analisis spasial faktor lingkungan dengan kejadian DBD di Kecamatan Genuk. Jenis penelitian ini deskriptif dengan pendekatan kuantitatif. Fokus penelitian ini adalah kondisi SPAL, penumpukan ban bekas dan sumur gali. Penelitian ini dilakukan di Kecamatan Genuk (Kelurahan Genuksari, Karangroto, Bangetayu Kulon dan Banjardowo pada bulan Maret 2016. Instrumen meliputi lembar observasi, peta lokasi, Global Positioning System (GPS, alat fotografi dan AcrGIS. Analisis data menggunakan SIG. Hasil penelitian menunjukkan bahwa kejadian DBD menggerombol pada beberapa RW yang berdekatan dengan keberadaan penumpukan ban bekas sekitar permukiman dan sumur gali terbuka.   Kata Kunci        : demam berdarah (DBD, lingkungan, analisis spasial     ABSTRACT Genukis one of dengue fever endemic district in Semarang city. Since 2012 until 2014, Genuk involve as the place that has high incidence of Dengue Fever. One of the factors in the incidence Dengue Fever areenvironmental factors.The goals of this research wasto analize spatial environmental factorsin the incidence Dengue Fever in Genukdistrict. This was a quantitative descriptive research with descriptive survey. The unit this research was water puddle on the pilling of the tire, the dug wells, and waste water pipeline that located in Genuk District (Subdistrict of Genuksari, Karangroto, Bangetayu Kulon and Banjardowo at March 2016. The instruments were paper of observation,the  map, GPS, camera and ArcGIS. Data was analyzed with GIS. The study showed that dengue fever transmission was inthe area with pilling of the tire, and the dug wells.   Keywords

  7. ANALISIS STRATEGI PENGEMBANGAN SEKTOR PERTANIAN SUB SEKTOR BAHAN PANGAN DI KABUPATEN BOYOLALI

    Directory of Open Access Journals (Sweden)

    Muhammad Zaenuri

    2017-06-01

    Full Text Available Permasalahan yang dikaji dalam penelitian ini adalah 1. Komoditas tanaman bahan makanan unggulan apa saja yang ada di masing-masing kecamatan di Kabupaten Boyolali, 2 Bagaimana strategi perencanaan pengembangan subsektor tanaman bahan makanan dilihat dari kelengkapan infrastruktur di Kabupaten Boyolali, 3 Bagaimana laju pertumbuhan sektor tanaman bahan makanan yang dimiliki tiap kecamatan di Kabupaten Boyolali. Data yang digunakan adalah data sekunder. Metode analisis data menggunakan analisis Location Quotient (LQ, Shift Share (SS, Klassen Typologi. Berdasarkan hasil penelitian dengan menggunakan analisis Location Quotient (LQ diketahui pengembangan komoditas padi terdapat di Kecamatan Ngemplak, Kecamatan Banyudono, Kecamatan Sawit. Komoditas tanaman jagung terdapat di Kecamatan Selo, Kecamatan Ampel, Kecamatan Cepogo dan Kecamatan Musuk. Komoditas ubi kayu di Kecamatan Klego, kecamatan Simo. Komoditas ubi jalar di Kecamatan Selo, Kecamatan Simo dan Kecamatan Mojosongo. Komoditas kacang tanah ada di Kecamatan Boyolali dan Kecamatan Nogosari. Komoditas kedelai di Kecamatan Juwangi, Kecamatan Sambi, Kecamatn Kemusu dan Kecamatan Wonosegoro. The problems that were in this research is 1 Commodities food plants seed material what it was in each carpel kecamatan in kabupaten boyolali, 2 how strategy sub planning the development of the food crops sector seen from the completeness of the infrastructure in boyolali district, 3 how sector growth rate of plants of food material possessed every sub-district in boyolali district. The data used was secondary data. Data analysis methods using analysis loqation quotient (LQ, shift share (SS, klassen typologi . According to the research using analysis loqation quotient (LQ development rice is in in ngemplak, in banyudono, in palm. Corn is crops in district violoncello, in ampel, in cepogo and in musuk. Commodities cassava in district klego, in simo. Commodities sweet potatoes in in violoncello, in simo and

  8. Pengaruh Advance Organizer Berbasis Proyek Terhadap Kemampuan Analisis – Sintesis Siswa

    Directory of Open Access Journals (Sweden)

    Tasiwan -

    2014-01-01

    Full Text Available Penelitian ini dilakukan untuk mengetahui pengaruh model pengatur kemajuan (advance organizer berbasis proyek terhadap kemampuan analisis – sintesis siswa pada konsep Energi. Sebelum pembelajaran, diberikan tugas proyek pada siswa untuk merealisasikan bel listrik sederhana, rangkaian arus seri - paralel, dan tuas. Produk proyek digunakan sebagai advance organizer dalam pembelajaran di kelas. Penguatan kognitif dilakukan melalui diskusi kelompok dan pembuatan peta konsep, ekspositori guru di kelas, dan kegiatan eksperimen laboratorium. Data diambil melalui pretest, post test, observasi partisipatif pembelajaran oleh dua orang observer, penilaian produk, peta konsep dan laporan kegiatan eksperimen. Teknik analisis data meliputi uji prasyarat data dan uji hipotesis Hasil penelitian menunjukkan bahwa siswa mengalami peningkatan kemampuan analisis – sintesis dalam aspek menguraikan, mengkategorikan, mengidentifikasi, merumuskan pernyataan, merekonstruksi, menentukan konsep, dan menganalisis konsep dengan rata – rata peningkatan delta skor sebesar 54,46 %, uji t sebesar 6,4, dan skala gain sebesar 0,3. This study was conducted to determine the effect of project-based advance organizer model on student’s analysis - synthesis ability of the energy concept. Students were given an assignment to realize the project on simple electric bell, the series – parallel circuit, and lever, before learning. The products of project were used as an advanced organizer in the learning activity. Cognitive strengthening was done through group discussions and concept mapping, expository learning in the classroom, and laboratory experiments activities. The data were taken through a pretest, post-test, participant observation study by two observers, product assessment, concept maps and report of experiment activities. Results showed that the students’ analysis - synthesis ability increased in the aspect of describing, categorizing, identifying, statement

  9. KERAGAAN WARNA IKAN CLOWN BIAK (Amphiprion percula POPULASI ALAM DAN BUDIDAYA BERDASARKAN ANALISIS GAMBAR DIGITAL

    Directory of Open Access Journals (Sweden)

    Ruby Vidia Kusumah

    2015-09-01

    Full Text Available Penelitian ini bertujuan untuk mengkaji keragaan warna ikan clown Biak (Amphiprion percula populasi alam dan budidaya berdasarkan analisis gambar digital sebagai dasar upaya pemuliaannya. Gambar digital diambil dari koleksi ikan clown Biak Balai Besar Perikanan Budidaya Laut Lampung, Balai Besar Penelitian dan Pengembangan Budidaya Laut Gondol, Bali; serta pengumpul ikan hias di Denpasar, Bali menggunakan kamera digital Canon EOS 600D. Pola warna dikarakterisasi secara visual terhadap variasi strip hitam dan putih pada dasar badan oranye, jenis warna dianalisis menggunakan ImageJ 1.49s, persentase penutupan warna dilakukan dengan Adobe Photoshop CS5. Pola warna dikarakterisasi oleh strip hitam tebal, tipis, gelap, pudar, terputus, bergabung, serta strip putih normal, pelana, spot, melebar, dan terputus. Warna hitam alam dikarakterisasi oleh hue (H: 300-60º, saturation (S: 8%-56%, brightness (B: 3%-19%, sedangkan budidaya H: 300-23º, S: 9%-71%, B: 4%-20%. Warna oranye alam H: 19-33º, S: 88%-98%, B: 47%-85%, dan budidaya H: 14-29º, S: 86%-99%, B: 38%-82%. Warna putih alam H: 36-270º; S: 1%-13%, B: 66%-88%, dan budidaya H: 0-229º, S: 0%-14%, B: 55%-87%. Persentase penutupan warna badan didominasi warna oranye dengan rata-rata 45% untuk populasi alam dan 57% untuk populasi budidaya. Keragaan warna ikan clown Biak dapat diarahkan pada pembentukan strain misbar, picasso, spot (domino, dan onyx. Metode analisis gambar digital sangat potensial digunakan untuk analisis keragaan warna ikan hias.

  10. Pembelajaran Biokimia melalui Analisis Kasus-kasus Olahraga untuk Meningkatkan Sport Scientific Literaci Mahasiswa

    Directory of Open Access Journals (Sweden)

    - Erman

    2013-01-01

    Full Text Available Abstract: Biochemistry Teaching through Sport-case Analyses to Improve Students' Sport Scientific Literacy. This quasi-experimental study focuses on examining the effect of biochemistry teaching on students' sport scientific literacy (SSL. The study involved 107 students of a teacher training institution, selected using a stratified random sampling. The results of t-test utilizing pre-test and post-test control group design show that biochemistry teaching affects students' SSL, as indicated by the scores of the experimental group which were four times higher than those of the control group. The SSL level of the experimental group increased from level 2 (nominal and level 3 (functional to level 3 (functional, level 4 (conceptual, and level 5 (multidimensional. Abstrak: Pembelajaran Biokimia melalui Analisis Kasus-kasus Olahraga untuk Meningkatkan Sport Scientific Literaci Mahasiswa. Penelitian ini bertujuan untuk mengetahui pengaruh pembelajaran biokimia melalui analisis kasus-kasus olahraga terhadap literasi sport scientific mahasiswa. Sebanyak 107 mahasiswa dari program studi ilmu keolahragaan sebuah LPTK di Surabaya dipilih sebagai sampel dengan menggunakan sampling random berstrata. Desain yang digunakan adalah desain pretest-posttest control group dari desain kuasi eksperimen. Data dianalisis dengan uji-t sampel independen. Hasil peneli­tian menunjukkan bahwa pembelajaran biokimia melalui analisis kasus-kasus olahraga merupakan suatu metode yang efektif untuk meningkatkan sport Scientific literacy (SSL mahasiswa. Rerata skor perolehan SSL yang diperoleh mahasiswa kelompok eksperimen sekitar 4 kali lebih tinggi daripada yang diperoleh mahasiswa kelompok kontrol. Tingkatan SSL mahasiswa naik dari level 2 (nominal dan level 3 (fungsional menjadi level 3 (fungsional, level 4 (konseptual, dan level 5 (multidimensional.

  11. Analisis Film Horor Indonesia Produksi Tahun 2014 (Studi Kasus: Mall Klender dan Kamar 207

    Directory of Open Access Journals (Sweden)

    Dedi Sukatno Sembiring Meliala

    2016-02-01

    Full Text Available Abstrak Film horor erat kaitannya dengan tokoh antagonis yang menimbulkan ketakutan pada penonton dalam bentuk makhluk supranatural seperti hantu, roh jahat dan sebagainya. Karakteristik film dengan genre horor membuat penonton terbawa suasana dengan alur ceritanya yang menakutkan. Namun, beberapa dari film horor Indonesia menyajikan adegan-adegan yang kurang sopan bahkan tergolong asusila atau porno. Untuk itu, penelitian ini ingin melihat apakah terdapat konten pornografi pada film Mall Klender dan Kamar 207 yang merupakan film horor Indonesia terlaris di tahun 2014. Analisis dilakukan dengan melihat pandangan dan penilaian 30 responden dengan karakteristik yaitu penonton film horor Indonesia yang berusia 20-40 tahun. Berdasarkan hasil analisis, tidak didapatkan konten pornografi pada film Mall Klender dan Kamar 207. Adegan-adegan yang terindikasi sebagai konten pornografi ternyata masih dapat diterima oleh penonton sebagai adegan yang berada dalam batas kewajaran dan mendukung pembawaan suasana dan kesan dalam cerita yang disampaikan. Kata Kunci: film horror Indonesia, analisis konten, pornografi Abstract The horror film is closely related to the antagonist that causes fear for audience in the form of supernatural creatures such as ghosts, demons and so on. Characteristic of the horor film is to make the audience carried away with the scary plot. However, some of the existing Indonesian horror film presents scenes that classified as obscene or pornographic. Therefore, this study wanted to see if there are any pornographic content on the film Klender Mall and Room 207 is the best-selling Indonesian horror movie in 2014. The analysis was done by looking at the view and assessment of 30 respondents which are Indonesian horror movie goers aged 20-40 years. Based on the analysis, there is no founding of pornographic content on the film Klender Mall and Room 207. The scenes that indicated as pornographic content was still acceptable by the audience

  12. La cianoterapia: Reportes preliminares

    Directory of Open Access Journals (Sweden)

    René F Espinosa Alvarez

    1996-08-01

    Full Text Available Se seleccionaron 61 pacientes con crisis asmáticas y 40 con urgencias hipertensivas, del total de pacientes que acudieron en 1995 al cuerpo de guardia del Policlínico Comunitario Docente "Lawton". Se les aplicó cianoterapia por la metodología establecida por nosotros. Se encontró respuesta terapéutica total en 35 asmáticos y en 28 hipertensos, respuesta parcial en 8 asmáticos y en 3 hipertensos y respuesta nula en 18 asmáticos y en 9 hipertensos. Los pacientes con respuesta terapéutica total no presentaban otra afección asociada, en tanto que los que tuvieron respuesta parcial o nula sí tenían otra afección asociada. No se observó reacción secundaria con este proceder.

  13. Informe preliminar sobre paludrina

    Directory of Open Access Journals (Sweden)

    Aquiles Peñuela Rozo

    1948-05-01

    Full Text Available En el año de 1945, Curd Davey y Rose eligieron la pirimidina como substancia de experimentación debido a que esta substancia se encuentra en las nucleo-proteinas y por su presencia en algunas sulfadrogas especial mente la sulfadiazina, de conocidas propiedades anti-palúdicas. Ensayaron la pirimidina y derivados en infestaciones por plasmodium gallinaceum en gallinas; y comprobaron que estas substancias tenían realmente acción antipalúdica. Pero al trasladar sus experiencias al hombre, encontraron que la pirimidina y sus derivados eran demasiado tóxicos. Pensando, entonces, en la similitud química del grupo de la pirimida y de la guanidina, incluyeron este último grupo en los compuestos para ensayar, descubriendo que la inclusión de la guanidina aumentaba grandemente la acción de las substancias en experiencia. Se obtuvo de esta manera un producto denominado en el numero 4-888, o paludrina, cuya fórmula o nombre químico es N. P. clorofenil N5 isopropildiguanidina, droga que se encontró muy activa contra las formas sanguíneas del Plasmodium Gallinaceum y que también se hallo activa contra las formas exoeritrocíticas del parásito. Esta capacidad de obrar sobre la fase exoeritrocítica es prácticamente exclusiva de esta substancia. Hasta hace poco tiempo esta fase exoeritrocítica, había sido demostrada solamente en trabajos de experimentación en las  aves; pero en la actualidad ha quedado también demostrada en la enfermedad humana, por experiencias del Filipino Nolasco and África, quien logro demostrar el plasmodium Vivax en el tejido retículo endotelial del pulmón de enfermos de paludismo, aunque ya Brug, en el año de 1940 había hecho comunicaciones en el mismo sentido. Se comprende la grande importancia de la paludrina, en el tratamiento del paludismo; si se considera que las recidivas de la enfermedad son debidas a la existencia de esta fase xeoeritrocítica.

  14. Estenosis traqueal: Estudio preliminar

    Directory of Open Access Journals (Sweden)

    Rafael Pinilla González

    2000-12-01

    Full Text Available Se realizó un estudio retrospectivo y descriptivo con la utilización de los expedientes clínicos de 5 pacientes con estenosis traqueal, mayoritariamente como consecuencia de intubación prolongada, y en el que se tuvo en cuenta aspectos relacionados con el diagnóstico, el tratamiento y las complicaciones. Existió un predominio del sexo femenino y edad media de 44,6 años. La intubación prolongada de origen diverso fue la causa de la estenosis en 4 de los 5 pacientes y en 1 fue posterior a la reparación de lesión traqueal yatrógena. La instalación de la estenosis tuvo lugar entre 8 días y 3 meses. La tomografía lineal en 3 pacientes y en 2 la radiografía simple de tráquea anteroposterior y lateral verificaron el diagnóstico. La endoscopia traqueobronquial preoperatoria fue de utilidad en la caracterización de la estenosis. En todos los pacientes se realizó tratamiento quirúrgico al resecar el área estenótica con posterior anastomosis terminoterminal y fijación del cuello en flexión durante 8 días como promedio. Dos pacientes mostraron granulomas en el nivel de la línea de sutura, los cuales fueron tratados por vacuolización con láser. No se reportó mortalidad en la muestra estudiadaA retrospective and descriptive study was conducted by using the medical histories of 5 patients with tracheal stenosis, mostly as a result of prolongued intubation. Aspects connected with the diagnosis, treatment and complications were taken into account. It was observed a predominance of females and an average age of 44.6. Prolongued intubation of different origin was the cause of stenosis in 4 of the 5 patients, whereas in the other it occurred after the reparation of the tracheal and athrogenous lesion. The installation of stenosis took place between 8 days and 3 months. Lineal tomography in 3 patients and anteroposterior and lateral simple X-ray of the trachea in 2 confirmed the diagnosis. Preoperative tracheobronchial endoscopy was useful to characterize stenosis. All patients underwent surgical treatment with resection of the stenotic area by posterior terminoterminal anastomosis and fixation of the neck in flexion during 8 days as an average. 2 patients that had granulomas at the level of the suture line were treated with nuclear vacuolization. No mortality was reported in the studied sample

  15. DE AGUA. ESTUDIO PRELIMINAR

    Directory of Open Access Journals (Sweden)

    Esther E. Pellizzari

    2015-01-01

    Full Text Available El objetivo del presente estudio fue investigar la resistencia al arsénico en cultivos puros de Pseudomonas aeruginosa , aislada de aguas subterráneas de Presidencia Roque Sáenz Peña, provincia de Chaco y evaluar la posibilidad de su uso para la remoción de este contaminante presente en las aguas subterráneas. Las cepas fueron inmovilizadas en piedra natural y se cu ltivaron en caldo de sales y 1 mgAs/L . Se observó la resistencia al arsénico y la formación de biofilm , logrando la interacción entre la s células, roca y arsénico . L a remoción de arsénico se evaluó durante 3 meses y el porcentaje de eliminación de arsénico al final del experimento fue 60%.

  16. ANALISIS POTENSI DAN PROYEKSI PENERIMAAN RETRIBUSI PELAYANAN PASAR DI KABUPATEN SEMARANG

    Directory of Open Access Journals (Sweden)

    Evi Fatmawati

    2017-06-01

    Full Text Available Retribusi pelayanan pasar merupakan jenis retribusi jasa umum yang cukup potensial, dikarenakan Kabupaten Semarang menarik retribusi dari 33 pasar tradisional setiap harinya. Tujuan penelitian ini, untuk menganalisis potensi penerimaan retribusi pasar di Kabupaten Semarang tahun 2011 – 2015, serta memproyeksi pendapatan retribusi pelayanan pasar tahun 2016 – 2020. Penelitian ini menggunakan analisis kontribusi, analisis pertumbuhan, analisis potensi, dan analisis ARIMA (2,1,2 (Auto Regressive Integrated Moving Average. Hasil penelitian menunjukan: (1 kontribusi retribusi pelayanan pasar terhadap retribusi daerah dan PAD dalam kategori kurang dan sangat kurang, (2 pertumbuhan retribusi pelayanan pasar berfluktuasi, (3 penerimaan retribusi pelayanan pasar belum berdasarkan potensi, (4 target retribusi pelayanan pasar berada dibawah potensi, (5 proyeksi pendapatan retribusi pasar meningkat dalam lima tahun kedepan. Adanya selisih antara potensi dengan realisasi dapat dijadikan peluang oleh Pemerintah Daerah dalam memaksimalkan penerimaan retribusi pelayanan pasar. Saran peneliti yaitu penetapan target sesuai dengan potensi, serta peningkatan kualitas pelayanan pasar, hal tersebut diharapkan dapat meningkatkan sumbangan retribusi pelayanan pasar terhadap PAD di Kabupaten Semarang. Retribution as a source of local income had a great opportunity to be improve and be develop so. Market retribution service was a kind of public service retribution that potential enough, due to Semarang Regency managed and attracted the retribution of 33 traditional markets every day. The objective of this research was to analyze the potential and contribution of market retribution at Semarang Regency in 2011-2015, also approximate local market retribution service in 2016-2010. This research used contribution analysis, the growth analysis, potential analysis, and analyzed ARIMA (2,1,2 (Auto Regressive Integrated Moving Average. The results of this research that : (1

  17. Analisi sui pigmenti di ceramica neolitica tramite tecniche Raman e LIBS

    Directory of Open Access Journals (Sweden)

    Cristina Fabbri

    2007-04-01

    Full Text Available I dati presentati in questo breve contributo provengono da uno studio condotto in collaborazione dal Dipartimento di Scienze Archeologiche dell’Università di Pisa e dall’Istituto per i Processi Chimico-Fisici di Fisica molecolare del CNR di Pisa. Le metodologie applicate sono basate sull’analisi integrata delle tecniche spettroscopiche Raman e LIBS già ampiamente utilizzate nel campo dei Beni Culturali; i metodi sono infatti essenzialmente non distruttivi, non richiedono di un pre trattamento del campione e l’acquisizione delle misure è immediata.

  18. ANALISIS BAURAN PEMASARAN KENDARAAN RODA TIGA MEREK KAISAR PADA PT KAISAR MOTORINDO INDUSTRI PEKANBARU

    Directory of Open Access Journals (Sweden)

    Bambang Suroto

    2015-04-01

    Full Text Available Abstrak: Banyaknya perusahaan atau operator yang melayani jaringan internet secara otomatis akan timbul suatu proses yang dinamakan pemasaran. Di dalam dunia usaha, pemasaran merupakan salah satu fungsi penting didalam suatu perusahaan, karena dalam pemasaran mencakup beberapa hal kegiatan penting yang kita kenal dengan marketing mix yang diantaranya adalah perencanaan produk (product, penetapan harga (price, program promosi (promotion, sangat penting dalam keberhasilan suatu perusahaan namun ada satu hal yang perlu diperhatikan dan perlu dianalisis apabila perusahaan menginginkan atau mempunyai daur hidup atau life cycle produk yang lebih lama, maka perusahaan harus melakukan analisis perilaku pelanggan. Selain kegiatan pemasaran yang sangat penting perusahaan juga tidak boleh mengabaikan apa yang dibutuhkan oleh seorang konsumen, faktor apa saja yang dapat merangsang pelanggan untuk melakukan pembelian suatu barang, serta mengapa konsumen mempunyai banyak kebutuhan dalam waktu yang relatif singkat dan tentunya hal itu semua menggambarkan arti penting sebuah kegiatan analisis perilaku konsumen. Keluhan yang dirasakan konsumen atau pelanggan adalah promosi yang diberikan atau ditawarkan terkadang sering tidak sesuai dengan kenyataan yang ada di lapangan, seperti akses internet yang lama, dan jaringan yang sering terputus karena adanya gangguan dan sistem perbaikan jaringan. Masalah dalam penelitian ini adalah faktor-faktor apakah yang menyebabkan tidak tercapainya target pemasaran pemasangan jaringan internet speedy pada PT.Kaisar Motorindo Industri Pekanbaru. Metode yang digunakan dalam penelitian ini adalah dengan menggunakan metode deskriptif, yaitu menggunakan analisis data kualitatif serta analisis data dengan menghubungkan antara teori dan permasalahan yang diteliti. Hasil penelitian diperoleh variabel produk, dalam hal ini merupakan kombinasi barang dan jasa yang ditawarkan oleh perusahaan kepada pasar sasaran terhadap pemasaran jaringan

  19. ANALISIS FUNDAMENTAL MAKRO DAN INTEGRASI PASAR SAHAM DUNIA DENGAN BURSA EFEK INDONESIA

    Directory of Open Access Journals (Sweden)

    Luh Gede Sri Artini

    2017-11-01

    Full Text Available Penelitian ini merupakan gabungan dari penelitian sebelumnya mengenai hubungan antara harga saham dengan kinerja ekonomi makro, dan penelitian mengenai integrasi Pasar Modal internasional.Variabel ekonomi makro dalam penelitian ini dibatasi pada pertumbuhan PDB, tingkat suku bunga SBI dan nilai Kurs dolar Amerika terhadap Rupiah dan Indeks saham digunakan adalah Indeks Dow Jones, Indeks Saham Australia, Indeks Shanghai dan Indeks Singapura. Data dikumpulkan dari tahun 2011 sampai tahun 2015 secara bulanan dengan teknik analisis regresi linier dengan bantuan Statistical Package For Social Science (SPSS

  20. Dove sta andando l'analisi musicale? Riflessioni sul VII EuroMac

    Directory of Open Access Journals (Sweden)

    Mario Baroni

    2014-01-01

    Full Text Available Come tutti i lettori della Rivista ormai sapranno, si è svolto a Roma dal 29 settembre al 2 ottobre di quest’anno, presso il Conservatorio di S. Cecilia, il settimo convegno europeo di analisi musicale (VII European Music Analysis Conference ossia VII EuroMac. Nel convegno, organizzato dal GATM e diretto da Giorgio Sanguinetti, sono state presentate 197 relazioni e svolti otto laboratori. Tutti i materiali sono stati riassunti in un volume (Programme and Abstract Book, Iter Edizioni di Subiaco curato da Egidio Pozzi e Antonio Cascelli.