WorldWideScience

Sample records for reaction grading system

  1. Sleeve reaction chamber system

    Science.gov (United States)

    Northrup, M Allen [Berkeley, CA; Beeman, Barton V [San Mateo, CA; Benett, William J [Livermore, CA; Hadley, Dean R [Manteca, CA; Landre, Phoebe [Livermore, CA; Lehew, Stacy L [Livermore, CA; Krulevitch, Peter A [Pleasanton, CA

    2009-08-25

    A chemical reaction chamber system that combines devices such as doped polysilicon for heating, bulk silicon for convective cooling, and thermoelectric (TE) coolers to augment the heating and cooling rates of the reaction chamber or chambers. In addition the system includes non-silicon-based reaction chambers such as any high thermal conductivity material used in combination with a thermoelectric cooling mechanism (i.e., Peltier device). The heat contained in the thermally conductive part of the system can be used/reused to heat the device, thereby conserving energy and expediting the heating/cooling rates. The system combines a micromachined silicon reaction chamber, for example, with an additional module/device for augmented heating/cooling using the Peltier effect. This additional module is particularly useful in extreme environments (very hot or extremely cold) where augmented heating/cooling would be useful to speed up the thermal cycling rates. The chemical reaction chamber system has various applications for synthesis or processing of organic, inorganic, or biochemical reactions, including the polymerase chain reaction (PCR) and/or other DNA reactions, such as the ligase chain reaction.

  2. Diagnostic Appraisal of Grade 12 Students' Understanding of Reaction Kinetics

    Science.gov (United States)

    Yan, Yaw Kai; Subramaniam, R.

    2016-01-01

    The study explored grade 12 students' understanding of reaction kinetics, a topic which has not been extensively explored in the chemistry education literature at this level. A 3-tier diagnostic instrument with 11 questions was developed--this format is of very recent origin and has been the subject of only a handful of studies. The findings…

  3. Registration Patterns Under Two Different Grading Systems.

    Science.gov (United States)

    Remley, Audrey W.

    In the early 1960's, Westminster College adopted a new grading system, with the traditional grade levels of A, B, C, D, and F converted to DN (Distinction), HP (High Pass), P (Pass), and NC (No Credit). NC replaced both D and F of the old system, and grade point averages were abolished, in an effort to encourage students to register in more…

  4. Forecasting and recruitment in graded manpower systems

    NARCIS (Netherlands)

    van Nunen, J.A.E.E.; Wessels, J.

    1977-01-01

    In this paper a generalized Markov model is introduced to describe the dynamic behaviour of an individual employee in a graded Manpower system. Characteristics like the employee's grade, his educational level, his age and the time spent in his actual grade, can be incorporated in the Markov model.

  5. Foraminal syringomyelia: suggestion for a grading system.

    Science.gov (United States)

    Versari, P P; D'Aliberti, G; Talamonti, G; Collice, M

    1993-01-01

    The standard treatment of foraminal syringomyelia includes foramen magnum decompression and duraplasty. Improvement or stabilization of the disease are achieved in most of cases. However, at least one third of patients are reported to receive little or no benefit. In this paper we retrospectively reviewed a series of 40 consecutive foramen magnum decompressions in order to identify the possible pre-operative outcome predictors. Based on clinical evolution, neurological impairment and radiological features, a scale of severity was fixed and retrospectively tested. A pre-operative score was obtained for each patient and was correlated with the surgical results. Then a four level grading system was derived. All grade I and grade II patients achieved good results (improvement or stabilization), whereas grade III patients showed intermediate behaviour and grade IV invariably worsened. On this basis, surgical results of foramen magnum decompression might be further improved provided that a careful pre-operative selection is made.

  6. Alternative Grading Systems. The Practitioner, Vol. III, No. 3.

    Science.gov (United States)

    De Leonibus, Nancy; Thomson, Scott

    After examining some of the pros and cons of traditional grading, the demands colleges make on grading practices, and the responses of people interested in grading, a number of examples of operating alternative systems are given. The alternatives include a dual (pass/withdraw grading in some courses, traditional grading in others) system, a…

  7. Graded thermal insulation layer systems; Gradierte Waermedaemmschichtsysteme

    Energy Technology Data Exchange (ETDEWEB)

    Leushake, U.; Krell, T. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Koeln (Germany). Inst. fuer Werkstoff-Forschung

    1996-12-31

    Graded thermal insulation systems reduce local stresses between two layers. Grading usually involves a concentration variation in a second phase but may also involve variations of the microstructure or chemical composition. The contribution discusses the application of this technique for thermal protection of turbine blades in aircraft propulsion systems. [Deutsch] Mit Hilfe gradierter Waermeschichtsysteme ist es moeglich die lokalen Spannungen zwischen zwei Schichten zu verringern. Die Gradierung umfasst meistens eine Variation des Gehaltes einer zweiten Phase, kann aber auch die Variation der Mikrostruktur oder der chemischen Zusammensetzung beinhalten. In diesem Beitrag wird auf die Anwendung als thermischer Schutz von Turbinenschaufeln fuer Flugtriebwerke eingegangen.

  8. Importance of the support and the grade of Pt in the oxygen reduction reaction

    International Nuclear Information System (INIS)

    Enriquez M, O.; Fernandez V, S.M.

    2004-01-01

    The technology of the fuel cells type Proton Exchange Membrane (PEM), needs to define clearly the influence of the different involved parameters, this is made in general using methods of electrochemical impedance, in which the involved reactions can be presupposed. Another form of making is identifying experimentally the influence of the different parameters. In this work the obtained results are reported with for the oxygen reduction reaction using as electro catalyst platinum analytical grade and fuel cell grade and like support graphite and vulcan. It was found that as much the support as the particle size modify the over potential for the oxygen reduction reaction (Orr). (Author)

  9. A Machine Vision System for Automatically Grading Hardwood Lumber - (Proceedings)

    Science.gov (United States)

    Richard W. Conners; Tai-Hoon Cho; Chong T. Ng; Thomas H. Drayer; Joe G. Tront; Philip A. Araman; Robert L. Brisbon

    1990-01-01

    Any automatic system for grading hardwood lumber can conceptually be divided into two components. One of these is a machine vision system for locating and identifying grading defects. The other is an automatic grading program that accepts as input the output of the machine vision system and, based on these data, determines the grade of a board. The progress that has...

  10. Comparing 2 Whiplash Grading Systems to Predict Clinical Outcomes.

    Science.gov (United States)

    Croft, Arthur C; Bagherian, Alireza; Mickelsen, Patrick K; Wagner, Stephen

    2016-06-01

    Two whiplash severity grading systems have been developed: Quebec Task Force on Whiplash-Associated Disorders (QTF-WAD) and the Croft grading system. The majority of clinical studies to date have used the modified grading system published by the QTF-WAD in 1995 and have demonstrated some ability to predict outcome. But most studies include only injuries of lower severity (grades 1 and 2), preventing a broader interpretation. The purpose of this study was assess the ability of these grading systems to predict clinical outcome within the context of a broader injury spectrum. This study evaluated both grading systems for their ability to predict the bivalent outcome, recovery, within a sample of 118 whiplash patients who were part of a previous case-control designed study. Of these, 36% (controls) had recovered, and 64% (cases) had not recovered. The discrete bivariate distribution between recovery status and whiplash grade was analyzed using the 2-tailed cross-tabulation statistics. Applying the criteria of the original 1993 Croft grading system, the subset comprised 1 grade 1 injury, 32 grade 2 injuries, 53 grade 3 injuries, and 32 grade 4 injuries. Applying the criteria of the modified (QTF-WAD) grading system, there were 1 grade 1 injury, 89 grade 2 injuries, and 28 grade 3 injuries. Both whiplash grading systems correlated negatively with recovery; that is, higher severity grades predicted a lower probability of recovery, and statistically significant correlations were observed in both, but the Croft grading system substantially outperformed the QTF-WAD system on this measure. The Croft grading system for whiplash injury severity showed a better predictive measure for recovery status from whiplash injuries as compared with the QTF-WAD grading system.

  11. Comparative evaluation of six cytological grading systems in breast carcinoma

    Directory of Open Access Journals (Sweden)

    Kaushik Saha

    2013-01-01

    Conclusions: Robinson′s grading system is simple, more objective and reproducible, and demonstrated the best concordance with histological grading. So, Robinson′s system should be used routinely for breast carcinoma aspirates.

  12. Extent of reaction in open systems with multiple heterogeneous reactions

    Science.gov (United States)

    Friedly, John C.

    1991-01-01

    The familiar batch concept of extent of reaction is reexamined for systems of reactions occurring in open systems. Because species concentrations change as a result of transport processes as well as reactions in open systems, the extent of reaction has been less useful in practice in these applications. It is shown that by defining the extent of the equivalent batch reaction and a second contribution to the extent of reaction due to the transport processes, it is possible to treat the description of the dynamics of flow through porous media accompanied by many chemical reactions in a uniform, concise manner. This approach tends to isolate the reaction terms among themselves and away from the model partial differential equations, thereby enabling treatment of large problems involving both equilibrium and kinetically controlled reactions. Implications on the number of coupled partial differential equations necessary to be solved and on numerical algorithms for solving such problems are discussed. Examples provided illustrate the theory applied to solute transport in groundwater flow.

  13. [Reproducibility of Fuhrman nuclear grade: advantages of a two-grade system].

    Science.gov (United States)

    Letourneux, Hervé; Lindner, Véronique; Lang, Hervé; Massfelder, Thierry; Meyer, Nicolas; Saussine, Christian; Jacqmin, Didier

    2006-06-01

    The Fuhrman nuclear grade is the reference histoprognostic grading system routinely used all over the world for renal cell carcinoma. Studies measuring the inter-observer and intra-observer concordance of Fuhrman grade show poor results in terms of reproducibility and repeatability. These variations are due to a certain degree of subjectivity of the pathologist in application of the definition of tumour grade, particularly nuclear grade. Elements able to account for this subjectivity in renal cell carcinoma are identified from a review of the literature. To improve the reliability of nuclear grade, the territory occupied by the highest grade must be specified and the grades should probably be combined. At the present time, regrouping of grade 1 and 2 tumours as low grade and grade 3 and 4 tumours as high grade would achieve better reproducibility, while preserving the prognostic: value for overall survival. The development of new treatment modalities and their use in adjuvant situations will imply the use of reliable histoprognostic factors to specify, indications.

  14. Preliminary work in developing sawbolt grading systems for white oak

    Science.gov (United States)

    Everette D. Rast; Everette D. Rast

    1971-01-01

    This paper is principally a description of one technique used in the development of white oak (Quercus alba L.) sawbolt grades--not a final sawbolt grading system for the species over its range. This technique can be used by anyone in developing other bolt-grade specifications or in refining the system presented in this paper.

  15. Comparison of the reliability of two hydronephrosis grading systems: The Society for Foetal Urology grading system vs. the Onen grading system

    International Nuclear Information System (INIS)

    Kim, S.-Y.; Kim, M.-J.; Yoon, C.S.; Lee, M.S.; Han, K.H.; Lee, M.-J.

    2013-01-01

    Aim: To compare the reliability of the conventional ultrasonography grading system for hydronephrosis as suggested by the Society for Fetal Urology (SFU) in 1993 and that developed by Onen in 2007. Materials and methods: One hundred and eighty kidneys in 90 paediatric patients were assessed by four radiologists using each of the two grading systems twice. The SFU system was graded 0–4 (0 = no hydronephrosis; 1 = visualized only renal pelvis; 2 = plus a few caliceal dilatation; 3 = all calyceal dilatation; 4 = plus parenchymal thinning). The Onen system was graded 0–4 (0 = no hydronephrosis; 1 = only renal pelvic dilatation; 2 = plus caliceal dilatation; 3 = plus 50% renal parenchymal loss). Cohen's kappa statistic was used to estimate intra- and interobserver agreement. The weighted least-squares approach was used to compare the intra-observer agreement, and bootstrapping was used to compare the interobserver agreement between the two systems. Results: Intra-observer agreement was substantial to almost perfect in both the SFU (κ 0.79–0.95) and the Onen (κ 0.66–0.97) grading system without difference. The overall interobserver agreement was substantial in both the SFU (κ 0.61–0.68) and the Onen (κ 0.66–0.76) grading system. However, interobserver agreement was fair to moderate for SFU grades 1 and 2 and Onen grades 2 and 3. Conclusion: Both the SFU and Onen grading system are reliable with good intra- and interobserver agreement. However, decreased interobserver agreement was demonstrated for SFU grades 1 and 2 and Onen grades 2 and 3

  16. Extraction of rare earth elements from low-grade Bauxite via precipitation reaction

    Science.gov (United States)

    Kusrini, E.; Nurani, Y.; Bahari, ZJ

    2018-03-01

    The aim of this research was to determine the optimum hydrometallurgical parameters to extract the rare earth elements (REE) from low-grade bauxite through acid leaching and precipitation reaction. REE or lanthanide recovery by a precipitation method with sodium sulphate and sodium phosphate as precipitation agents is reported where the effect of pH and recovery of REE are described. The metal composition of REE in low-grade bauxite after treatment were analyzed by ICP-OES. The total recovery values of REE elements at the first precipitation reaction using sodium sulphate as the precipitation agent at pH 3.5 showed ~68.2% of lanthanum, ~18.9% cerium, and ~7.8% yttrium. Lanthanum was the rare-earth element present at the highest concentration in the low-grade bauxite after the series treatments. An optimum pH of 3.5 for precipitation of rare-earth elements using sodium sulphate was demonstrated where this method is recommended for the extraction of REE elements from low-grade bauxite.

  17. Development of an automatic visual grading system for grafting seedlings

    Directory of Open Access Journals (Sweden)

    Subo Tian

    2017-01-01

    Full Text Available In this study, a visual grading system of vegetable grafting machine was developed. The study described key technology of visual grading system of vegetable grafting machine. First, the contrasting experiment was conducted between acquired images under blue background light and natural light conditions, with the blue background light chosen as lighting source. The Visual C++ platform with open-source computer vision library (Open CV was used for the image processing. Subsequently, maximum frequency of total number of 0-valued pixels was predicted and used to extract the measurements of scion and rootstock stem diameters. Finally, the developed integrated visual grading system was experimented with 100 scions and rootstock seedlings. The results showed that success rate of grading reached up to 98%. This shows that selection and grading of scion and rootstock could be fully automated with this developed visual grading system. Hence, this technology would be greatly helpful for improving the grading accuracy and efficiency.

  18. [The WHO/ISUP grading system for renal carcinoma].

    Science.gov (United States)

    Moch, H

    2016-07-01

    Histological tumor grading is an accepted prognostic parameter of renal cell carcinoma (RCC). In 2012, the International Society of Urologic Pathologists (ISUP) proposed a novel grading system for RCC, mainly based on the evaluation of nucleoli: grade 1 tumors have nucleoli that are inconspicuous and basophilic at ×400 magnification; grade 2 tumors have nucleoli that are clearly visible at ×400 magnification and eosinophilic; grade 3 tumors have clearly visible nucleoli at ×100 magnification; and grade 4 tumors have extreme pleomorphism or rhabdoid and/or sarcomatoid morphology. This grading system was validated for clear cell renal cell carcinoma and papillary renal cell carcinoma. At the same time, the ISUP proposed not grading chromophobe renal cell carcinomas according to this system. At a consensus conference in Zurich the World Health Organization (WHO) recommended the ISUP grading system; thus, the WHO/ISUP grading system is now going to be implemented internationally. The ISUP/WHO grading system has not been validated as a prognostic parameter for other tumor subtypes, but can be used for descriptive purposes.

  19. Carboplatin Hypersensitivity Reactions in Pediatric Low Grade Glioma Are Protocol Specific and Desensitization Shows Poor Efficacy.

    Science.gov (United States)

    Dodgshun, Andrew J; Hansford, Jordan R; Cole, Theresa; Choo, Sharon; Sullivan, Michael J

    2016-01-01

    The use of carboplatin for the treatment of pediatric low grade gliomas (PLGG) is often limited by the development of carboplatin hypersensitivity. Reported rates of carboplatin hypersensitivity reactions vary between 6% and 32% in these patients. Here we report the frequency of carboplatin hypersensitivity reactions depending on the treatment regimen used, and outcomes of carboplatin desensitization. The records of all patients in a single institution who were treated with carboplatin for PLGG were accessed and all patients receiving more than one dose of carboplatin are reported. Thirty four patients with PLGG were treated with carboplatin according to one of the two different regimens. Carboplatin hypersensitivity was documented in 47% of patients, but the frequency differed by treatment protocol. Those patients treated with 4-weekly single agent carboplatin had carboplatin allergy in 8% of cases whereas 68% of those treated with combined carboplatin and vincristine (every three weeks, according to the SIOP 2004 low grade glioma protocol) had carboplatin reactions (OR 23.6, P Desensitization was only successful in two out of 10 patients in whom it was attempted. Hypersensitivity reactions to carboplatin are more common in this cohort than previously reported and rates are protocol-dependent. Desensitization showed limited effectiveness in this cohort. © 2015 Wiley Periodicals, Inc.

  20. The Changing Landscape of Grading Systems in US Higher Education

    Science.gov (United States)

    Kleinman, Steven B.; Leidman, Mary Beth; Longcore, Andrew J.

    2018-01-01

    The following study explores the landscape of grading systems utilised in higher education, focusing on the frequency of different types of assessment scales (including Straight Letter, Plus/Minus, and other alternative policies). Although numerous studies have explored the relationship between university grading system and student behaviour,…

  1. The continuous reaction times method for diagnosing, grading, and monitoring minimal/covert hepatic encephalopathy

    DEFF Research Database (Denmark)

    Lauridsen, Mette Enok Munk; Thiele, Maja; Kimer, N

    2013-01-01

    Abstract Existing tests for minimal/covert hepatic encephalopathy (m/cHE) are time- and expertise consuming and primarily useable for research purposes. An easy-to-use, fast and reliable diagnostic and grading tool is needed. We here report on the background, experience, and ongoing research......-10) percentile) as a parameter of reaction time variability. The index is a measure of alertness stability and is used to assess attention and cognition deficits. The CRTindex identifies half of patients in a Danish cohort with chronic liver disease, as having m/cHE, a normal value safely precludes HE, it has...

  2. Periosteal reaction in systemic lupus erythematosus

    International Nuclear Information System (INIS)

    Glickstein, M.; Neustadter, L.; Dalinka, M.; Kricun, M.

    1986-01-01

    The authors report three patients with systemic lupus erythematosus and periosteal reaction. Two of the three cases had systemic vasculitis and the third had local ischemia with ischemic necrosis. (orig.)

  3. Fractal Behavior Of Gleason And Srigley Grading Systems

    Directory of Open Access Journals (Sweden)

    M.S. Serbanescu

    2016-06-01

    In-class variation was 0.045 using the box-counting algorithm and 0.048 using the R-VA algorithm for Gleason grading system and 0.161 using the box-counting algorithm and 0.178 using the R-VA algorithm for Srigley grading system. Inter-class variation was, for Gleason grading system 13/28 using the box-counting algorithm and 20/28 using the R-VA algorithm while for the Srigley grading system was 3/6 using the box-counting algorithm and 5/6 using the R-VA algorithm respectively. Srigley grading system seems to perform better than Gleason’s on inter-class variation, but has lower performance on in-class variation. Nevertheless, we must note that there is a large difference between the two systems regarding the number of classes. The FD computed with the R-VA algorithm has better discrimination results than the one computed with the box-counting algorithm in both grading systems, thus proving once again the R-VA’s performance [3].

  4. Design of Control System for Kiwifruit Automatic Grading Machine

    Directory of Open Access Journals (Sweden)

    Xingjian Zuo

    2013-05-01

    Full Text Available The kiwifruit automatic grading machine is an important machine for postharvest processing of kiwifruit, and the control system ensures that the machine realizes intelligence. The control system for the kiwifruit automatic grading machine designed in this paper comprises a host computer and a slave microcontroller. The host computer provides a visual grading interface for the machine with a LabVIEW software, the slave microcontroller adopts an STC89C52 microcontroller as its core, and C language is used to write programs for controlling a position sensor module, push-pull type electromagnets, motor driving modules and a power supply for controlling the operation of the machine as well as the rise or descend of grading baffle plates. The ideal control effect is obtained through test, and the intelligent operation of the machine is realized.

  5. Reaction dynamics in polyatomic molecular systems

    Energy Technology Data Exchange (ETDEWEB)

    Miller, W.H. [Lawrence Berkeley Laboratory, CA (United States)

    1993-12-01

    The goal of this program is the development of theoretical methods and models for describing the dynamics of chemical reactions, with specific interest for application to polyatomic molecular systems of special interest and relevance. There is interest in developing the most rigorous possible theoretical approaches and also in more approximate treatments that are more readily applicable to complex systems.

  6. Strategy to safety grade systems replacements

    International Nuclear Information System (INIS)

    Stimler, M.; Sullivan, K.E.; Trebincevic, I.

    1993-01-01

    The introduction of digital instrumentation and control systems in nuclear power plants is characterized by the need to satisfy the requirements of safety, reliability and man-machine ergonomics. Today digital instrumentation and control systems meet these requirements and the trend in Europe is towards full digital based nuclear power plant control systems. This paper describes Siemens (KWU) experience in nuclear power plants and development in trends within Europe. Topics which are the subject of major concern to NPP operators addressed in this paper are: human performance factors - man-machine interface; operating philosophy; safety, availability and reliability. Other aspects addressed are: Siemens open-quotes defense in depthclose quotes concept, description of Siemens digital I ampersand C systems, safety requirements and systems, I ampersand C qualification, control room ergonomics, information systems and retrofitting experience

  7. A new MRI grading system for chondromalacia patellae.

    Science.gov (United States)

    Özgen, Ali; Taşdelen, Neslihan; Fırat, Zeynep

    2017-04-01

    Background Chondromalacia patellae is a very common disorder. Although magnetic resonance imaging (MRI) is widely used to investigate patellar cartilage lesions, there is no descriptive MRI-based grading system for chondromalacia patellae. Purpose To propose a new MRI grading system for chondromalacia patellae with corresponding high resolution images which might be useful in precisely reporting and comparing knee examinations in routine daily practice and used in predicting natural course and clinical outcome of the patellar cartilage lesions. Material and Methods High resolution fat-saturated proton density (FS PD) images in the axial plane with corresponding T2 mapping images were reviewed. A detailed MRI grading system covering the deficiencies of the existing gradings has been set and presented on these images. Two experienced observers blinded to clinical data examined 44 knee MR images and evaluated patellar cartilage changes according to the proposed grading system. Inter- and intra-rater validity testing using kappa statistics were calculated. Results A descriptive and detailed grading system with corresponding FS PD and T2 mapping images has been presented. Inter-rater agreement was 0.80 (95% confidence interval [CI], 0.71-0.89). Intra-rater agreements were 0.83 (95% CI, 0.74-0.91) for observer A and 0.79 (95% CI, 0.70-0.88) for observer B (k-values). Conclusion We present a new MRI grading system for chondromalacia patellae with corresponding images and good inter- and intra-rater agreement which might be useful in reporting and comparing knee MRI examinations in daily practice and may also have the potential for using more precisely predicting prognosis and clinical outcome of the patients.

  8. Probabilistic sensitivity analysis of biochemical reaction systems.

    Science.gov (United States)

    Zhang, Hong-Xuan; Dempsey, William P; Goutsias, John

    2009-09-07

    Sensitivity analysis is an indispensable tool for studying the robustness and fragility properties of biochemical reaction systems as well as for designing optimal approaches for selective perturbation and intervention. Deterministic sensitivity analysis techniques, using derivatives of the system response, have been extensively used in the literature. However, these techniques suffer from several drawbacks, which must be carefully considered before using them in problems of systems biology. We develop here a probabilistic approach to sensitivity analysis of biochemical reaction systems. The proposed technique employs a biophysically derived model for parameter fluctuations and, by using a recently suggested variance-based approach to sensitivity analysis [Saltelli et al., Chem. Rev. (Washington, D.C.) 105, 2811 (2005)], it leads to a powerful sensitivity analysis methodology for biochemical reaction systems. The approach presented in this paper addresses many problems associated with derivative-based sensitivity analysis techniques. Most importantly, it produces thermodynamically consistent sensitivity analysis results, can easily accommodate appreciable parameter variations, and allows for systematic investigation of high-order interaction effects. By employing a computational model of the mitogen-activated protein kinase signaling cascade, we demonstrate that our approach is well suited for sensitivity analysis of biochemical reaction systems and can produce a wealth of information about the sensitivity properties of such systems. The price to be paid, however, is a substantial increase in computational complexity over derivative-based techniques, which must be effectively addressed in order to make the proposed approach to sensitivity analysis more practical.

  9. Chemical reactions in reverse micelle systems

    Science.gov (United States)

    Matson, Dean W.; Fulton, John L.; Smith, Richard D.; Consani, Keith A.

    1993-08-24

    This invention is directed to conducting chemical reactions in reverse micelle or microemulsion systems comprising a substantially discontinuous phase including a polar fluid, typically an aqueous fluid, and a microemulsion promoter, typically a surfactant, for facilitating the formation of reverse micelles in the system. The system further includes a substantially continuous phase including a non-polar or low-polarity fluid material which is a gas under standard temperature and pressure and has a critical density, and which is generally a water-insoluble fluid in a near critical or supercritical state. Thus, the microemulsion system is maintained at a pressure and temperature such that the density of the non-polar or low-polarity fluid exceeds the critical density thereof. The method of carrying out chemical reactions generally comprises forming a first reverse micelle system including an aqueous fluid including reverse micelles in a water-insoluble fluid in the supercritical state. Then, a first reactant is introduced into the first reverse micelle system, and a chemical reaction is carried out with the first reactant to form a reaction product. In general, the first reactant can be incorporated into, and the product formed in, the reverse micelles. A second reactant can also be incorporated in the first reverse micelle system which is capable of reacting with the first reactant to form a product.

  10. A new grading system for analyzing pediatric cholesteatoma

    International Nuclear Information System (INIS)

    Kodama, Akira; Ashimori, Naoki; Tsurita, Minako; Ban, Akihiro

    2007-01-01

    We developed a new grading system to understand the complicated pathological changes of cholesteatoma in comparison to those of chronic otitis media. This grading system, based on the extent of the cholesteatoma and the surrounding pathlogical changes, is able to simply express the entire pathological condition of the ear with cholesteatoma. Using this grading system, we analyzed the ears of 48 children with cholesteatoma, who underwent tympanoplasty over the past ten years. Their ages ranged from 2 to 15 years with an average age of 8.5 years. The attic and mesotympanic cholesteatomas were associated with greater pathological changes than those observed in postero-superior quadrant cholesteatomas. The degree of the pathological change in the area surrounding the cholesteatoma appears to correlate with the degree of extention of the cholesteatoma. This system is thus considered to be useful for evaluating the improvement in the pathological conditions before and after surgery in patients with cholesteatoma. (author)

  11. Formal specifications for safety grade systems

    International Nuclear Information System (INIS)

    Chisholm, G.H.; Smith, B.T.; Wojcik, A.S.

    1992-01-01

    The authors describe the findings of a study into the application of formal methods to the specification of a safety system for an operating nuclear reactor. They developed a formal specification that is used to verify and validate that no unsafe condition will result from action or inaction of the system. For this reason, the specification must facilitate thinking about, talking about, and implementing the system. In fact, the specification must provide a bridge between people (designers, engineers, policy makers) and diverse implementations (hardware, software, sensors, power supplies) at all levels. For a specification to serve as an effective linkage, it must have the following properties: (1) completeness, (2) conciseness, (3) unambiguity, and (4) communicativeness. In this paper they describe the development of a specification that has three properties. This development is based on the use of formal methods, i.e., methods that add mathematical rigor to the development, analysis and operation of computer systems and to applications based thereon (Neumann). They demonstrate that a specification derived from a formal basis facilitates development of the design and its subsequent verification

  12. The 6th Grade Primary History Book and the Reactions of the Greek and Cypriot Educational Communities and Societies

    Science.gov (United States)

    Kimitris, Petros N.

    2017-01-01

    The present study was designed to explore the role of Rebousi et al's primary 6th grade history school book in evaluating the experience of a nation but also to examine the causes behind the reactions of political parties, historians and the wider public. History books and politics have very deep roots that reflect on old responsibilities,…

  13. Property ($T$) for groups graded by root systems

    CERN Document Server

    Ershov, Mikhail; Kassabov, Martin

    2017-01-01

    The authors introduce and study the class of groups graded by root systems. They prove that if \\Phi is an irreducible classical root system of rank \\geq 2 and G is a group graded by \\Phi, then under certain natural conditions on the grading, the union of the root subgroups is a Kazhdan subset of G. As the main application of this theorem the authors prove that for any reduced irreducible classical root system \\Phi of rank \\geq 2 and a finitely generated commutative ring R with 1, the Steinberg group {\\mathrm St}_{\\Phi}(R) and the elementary Chevalley group \\mathbb E_{\\Phi}(R) have property (T). They also show that there exists a group with property (T) which maps onto all finite simple groups of Lie type and rank \\geq 2, thereby providing a "unified" proof of expansion in these groups.

  14. Long life reaction control system design

    Science.gov (United States)

    Fanciullo, Thomas J.; Judd, Craig

    1993-02-01

    Future single stage to orbit systems will utilize oxygen/hydrogen propellants in their main propulsion means due to the propellant's high energy content and environmental acceptability. Operational effectiveness studies and life cycle cost studies have indicated that minimizing the number of different commodities on a given vehicle not only reduces cost, but reduces the ground span times in both the pre- and postflight operations. Therefore, oxygen and hydrogen should be used for the reaction controls systems, eliminating the need to deal with toxic or corrosive fluids. When the hydrogen scramjet powered NASP design development began in 1985, new system design studies considered overall integration of subsystems; in the context of that approach, O2/H2 reaction controls system were more than competitive with storable propellant systems and had the additional benefits of lower life cycle cost, rapid turnaround times, and O2 and H2 commodities for use throughout the vehicle. Similar benefits were derived in rocket-powered SSTO vehicles.

  15. UP-GRADED RHIC INJECTION SYSTEM.

    Energy Technology Data Exchange (ETDEWEB)

    HAHN,H.FISCHER,W.SEMERTZIDIS,Y.K.WARBURTON,D.S.

    2003-05-12

    The design of the RHIC injection systems anticipated the possibility of filling and operating the rings with a 120 bunch pattern, corresponding to 110 bunches after allowing for the abort gap. Beam measurements during the 2002 run confirmed the possibility, although at the expense of severe transverse emittance growth and thus not on an operational basis. An improvement program was initiated with the goal of reducing the kicker rise time from 110 to {approx}95 ns and of minimizing pulse timing jitter and drift. The major components of the injection system are 4 kicker magnets and Blmlein pulsers using thyratron switches. The kicker terminating resistor and operating voltage was increased to reduce the rise time. Timing has been stabilized by using commercial trigger units and extremely stable dc supplies for the thyratron reservoir. A fiber optical connection between control room and the thyratron trigger unit has been provided, thereby allowing the operator to adjust timing individually for each kicker unit. The changes were successfully implemented for use in the RHIC operation.

  16. Curriculum Development for Enhancing Grade Nine Students' Systems Thinking

    Science.gov (United States)

    Hernthaisong, Preeyanan; Sitti, Somsong; Sonsupap, Kanyarat

    2015-01-01

    The objectives of this research were to study the development of a curriculum for enhancing grade 9 students' cognitive skills using a curriculum based on Systems Thinking Process. There were 3 phases: 1) studying of the problem; 2) development of tentative curriculum; and 3) implementation of the curriculum in a pilot study. The samples were 32…

  17. Modifying the Medical Research Council grading system through Rasch analyses

    NARCIS (Netherlands)

    Vanhoutte, Els Karla; Faber, Catharina Gerritdina; van Nes, Sonja Ingrid; Jacobs, Bart Casper; van Doorn, Pieter Antoon; van Koningsveld, Rinske; Cornblath, David Reid; van der Kooi, Anneke Jelly; Cats, Elisabeth Aviva; van den Berg, Leonard Hendrik; Notermans, Nicolette Claudia; van der Pol, Willem Lodewijk; Hermans, Mieke Catharina Elisabeth; van der Beek, Nadine Anna Maria Elisabeth; Gorson, Kenneth Craig; Eurelings, Marijke; Engelsman, Jeroen; Boot, Hendrik; Meijer, Ronaldus Jacobus; Lauria, Giuseppe; Tennant, Alan; Merkies, Ingemar Sergio José; Barreira, A. A.; Bennett, D.; van den Bergh, P. Y. K.; Bril, V.; Devigili, G.; Hadden, R. D.; Hahn, A. F.; Hartung, H.-P.; Hughes, R. A. C.; Illa, I.; Katzberg, H.; Léger, J.-M.; Lewis, R. A.; Lunn, M. P. T.; Nascimento, O. J. M.; Nobile-Orazio, E.; Padua, L.; Pouget, J.; Reilly, M. M.; van Schaik, I.; Smith, B.; de Visser, M.; Walk, D.

    2012-01-01

    The Medical Research Council grading system has served through decades for the evaluation of muscle strength and has been recognized as a cardinal feature of daily neurological, rehabilitation and general medicine examination of patients, despite being respectfully criticized due to the unequal

  18. Modifying the Medical Research Council grading system through Rasch analyses

    NARCIS (Netherlands)

    E.K. Vanhoutte (Els); C.G. Faber (Carin); S.I. van Nes (Sonja); B.C. Jacobs (Bart); P.A. van Doorn (Pieter); R. van Koningsveld (Rinske); D.R. Cornblath (David); A.J. Kooj (Anneke); E.A. Cats (Elisabeth); L.H. van den Berg (Leonard); N.C. Notermans (Nicolette); W.L. van der Pol (Ludo); M.C.E. Hermans; N.A.M.E. van der Beek (Nadine); K.C. Gorson (Kenneth); M. Eurelings (Marijke); L. Engelsman (Lyda); H. Boot (Hendrik); R.J. Meijer (Ron); G. Lauria (Giuseppe); C. Tennant (Christopher); I.S.J. Merkies (Ingemar)

    2012-01-01

    textabstractThe Medical Research Council grading system has served through decades for the evaluation of muscle strength and has been recognized as a cardinal feature of daily neurological, rehabilitation and general medicine examination of patients, despite being respectfully criticized due to the

  19. A revision of the Cormack and Lehane laryngoscopic grading system with special consideration to grade II laryngoscopic view

    Directory of Open Access Journals (Sweden)

    Hussain khan Z

    2007-10-01

    Full Text Available Background: The major responsibility of an anesthesiologist is to provide adequate respiration for the patient. The most vital element in providing functional respiration is the airway. No anesthetic is safe unless diligent efforts are devoted to maintaining an intact functional airway. Difficult intubation had been classified into four grades, according to the view obtainable at laryngoscopy by Cormack and Lehane in 1984. This grading system has been in use to evaluate and manage those patients with difficult airway by anesthesiologists. In clinical state, grades III and IV are quite rare, so the need for a modified Cormack and Lehane grading system was felt. The use of a modified Cormack-Lehane scoring system of laryngoscopic views during direct laryngoscopy, was previously examined in the Western population. Koh and his co-workers had examined this modified Cormack and Lehane grading system in Asian population in a study in Singapore General Hospital. The aim of this study was to investigate this scoring system in Iranian patients.Methods: In a cross sectional study, a modified version of the Cormack and Lehane grading system was evaluated in 300 patients requiring tracheal intubation. In the modified system, grade II (only part of the glottis is visible was divided into IIa (part of the cords is visible and IIb (only the arytenoids or the very posterior origin of the cords are visible. Difficult intubation was defined as requiring more than one laryngoscopy or the use of special equipments.Results: Sixty eight patients (22.7% were scored as grade IIa and 32 (7.7% as grade IIb. The prevalence of difficult intubation in grade IIb was significantly higher than patients in group IIa (47.8% vs. 2.9% respectively, Fisher's exact test, p= 0.001Conclusion: The modified grading system provides more information than the original Cormack and Lehane system."n 

  20. A Machine Vision System for Automatically Grading Hardwood Lumber - (Industrial Metrology)

    Science.gov (United States)

    Richard W. Conners; Tai-Hoon Cho; Chong T. Ng; Thomas T. Drayer; Philip A. Araman; Robert L. Brisbon

    1992-01-01

    Any automatic system for grading hardwood lumber can conceptually be divided into two components. One of these is a machine vision system for locating and identifying grading defects. The other is an automatic grading program that accepts as input the output of the machine vision system and, based on these data, determines the grade of a board. The progress that has...

  1. Sodium-water reaction product flow system

    Energy Technology Data Exchange (ETDEWEB)

    Shirataki, K; Wada, H

    1978-11-18

    Purpose: To provide the subject equipments wherein thermal insulating layers which neither exfoliate nor react by the impact due to high temperature sodium and hydrogen gas and are used for mitigating the thermal impact are provided on the inner surfaces of the emission system equipments, thereby preventing the destruction of the emission system equipments. Constitution: Thermal insulating layers are formed on the inner surfaces of sodium-water reaction product emission system equipments, that is, the inner surface of the emission system pipeline, that of the accommodation vessel and the surface of the cyclone separator, by film treatment, coating or heat resisting coating, and these surfaces are covered with the layers. Each of the layers is made of a material which does not cause a rapid reaction with high temperature sodium or hydrogen gas nor exfoliates and is withstandable for several seconds in which the thermal impact of at least the emission system comes into question, and its thickness is more than one capable of securing the necessary thermal resistance computed by the thermal impact analysis of the emission system.

  2. Sodium-water reaction product flow system

    International Nuclear Information System (INIS)

    Shirataki, Koji; Wada, Hozumi.

    1978-01-01

    Purpose: To provide the subject equipments wherein thermal insulating layers which neither exfoliate nor react by the impact due to high temperature sodium and hydrogen gas and are used for mitigating the thermal impact are provided on the inner surfaces of the emission system equipments, thereby preventing the destruction of the emission system equipments. Constitution: Thermal insulating layers are formed on the inner surfaces of sodium-water reaction product emission system equipments, that is, the inner surface of the emission system pipeline, that of the accommodation vessel and the surface of the cyclone separator, by film treatment, coating or heat resisting coating, and these surfaces are covered with the layers. Each of the layers is made of a material which does not cause a rapid reaction with high temperature sodium or hydrogen gas nor exfoliates and is withstandable for several seconds in which the thermal impact of at least the emission system comes into question, and its thickness is more than one capable of securing the necessary thermal resistance computed by the thermal impact analysis of the emission system. (Yoshihara, H.)

  3. Defence in depth by 'Leittechnique' systems with graded intelligence

    International Nuclear Information System (INIS)

    Aleite, W.

    1983-01-01

    In the past, only two types of nuclear power plant instrumentation and control systems were in use in the Federal Republic of Germany (FRG): safety systems and operational systems. Present nuclear power plant 'Leittechnique' systems in the FRG have been expanded from this 'black-and-white' status to multiple-grade systems with respect to safety, qualification requirements and intelligence. The extensive experience of the past has encouraged the rule-making committees - representing all parties working in the nuclear field - to differentiate between the protection limitations and condition limitations of the reactor protection system on one hand and the information systems (including the accident monitoring and alarm system) of different safety importance on the other, assuming additional extensive application of non-safety-grade operational Leittechnique systems. These definitions of categories are in accordance with international practice and enable designers to apply 'echelons of defence', composed of equipment of all categories, in accordance with 'defence-in-depth' concepts. They also simplify the introduction of computerized equipment, especially in the lower safety categories. Status, background and reasons of the introduction, as well as typical defence-in-depth modes, of the first running Leittechnique system of this kind (in the Grafenrheinfeld nuclear power plant) and especially their different tasks in disturbance handling are described. The international situation and future developments are briefly characterized. (author)

  4. Systemic Inflammatory Reaction in Operative Gynecological Care

    Directory of Open Access Journals (Sweden)

    A. V. Pronoza

    2008-01-01

    Full Text Available Objective: to evaluate the impact of various methods of anesthesia and treatment on the development of a systemic inflammatory reaction (SIR in gynecological patients. Subjects and methods. The manifestations of SIR were studied in 426 patients who had undergone standard operations on the uterine appendages via traditional laparoscopic access. Ninety-seven women had unoptimized anesthetic maintenance and postoperative preventive antibacterial therapy (Group 1; 95 women had unop-timized anesthetic maintenance and pre- and postoperative massive antibacterial therapy (Group 2; 103 women had optimized anesthetic maintenance and preventive antibacterial therapy (Group 3; 131 women had optimized anesthetic maintenance and massive antibacterial therapy (Group 4. Results. Antibacterial therapy was not found to affect the manifestations of SIR significantly. The optimized anesthetic maintenance that differed from the unoptimized one in higher nociceptive defense had a considerable impact on the manifestation of SIR. Low molecular-weight heparins and preoperative hyperv-olemic hemodilution with hydroxyethyl starch preparations positively affected the study indices. The observed SIR belonged to the second stage of release of the small amount of mediators into systemic circulation. The transition of SIR to the third stage of inflammatory reaction generalization was suggested by changes in other monitored parameters, simultaneously informing about this or that degree of multiple organ dysfunction. Conclusion. Laparoscopic surgical intervention, multicom-ponent preoperative sedation, preventive preoperative analgesia with nonsteroidal anti-inflammatory drugs, prevention of microcirculatory disorders with low molecular-weight heparins, preoperative hypervolemic hemodilution with hydroxyethyl starch, and use of the loading doses of opioids in the period of induction to anesthesia in combination with propofol lower the level of a systemic inflammatory response

  5. The 2014 International Society of Urological Pathology (ISUP) Consensus Conference on Gleason Grading of Prostatic Carcinoma: Definition of Grading Patterns and Proposal for a New Grading System.

    Science.gov (United States)

    Epstein, Jonathan I; Egevad, Lars; Amin, Mahul B; Delahunt, Brett; Srigley, John R; Humphrey, Peter A

    2016-02-01

    In November, 2014, 65 prostate cancer pathology experts, along with 17 clinicians including urologists, radiation oncologists, and medical oncologists from 19 different countries gathered in a consensus conference to update the grading of prostate cancer, last revised in 2005. The major conclusions were: (1) Cribriform glands should be assigned a Gleason pattern 4, regardless of morphology; (2) Glomeruloid glands should be assigned a Gleason pattern 4, regardless of morphology; (3) Grading of mucinous carcinoma of the prostate should be based on its underlying growth pattern rather than grading them all as pattern 4; and (4) Intraductal carcinoma of the prostate without invasive carcinoma should not be assigned a Gleason grade and a comment as to its invariable association with aggressive prostate cancer should be made. Regarding morphologies of Gleason patterns, there was clear consensus on: (1) Gleason pattern 4 includes cribriform, fused, and poorly formed glands; (2) The term hypernephromatoid cancer should not be used; (3) For a diagnosis of Gleason pattern 4, it needs to be seen at 10x lens magnification; (4) Occasional/seemingly poorly formed or fused glands between well-formed glands is insufficient for a diagnosis of pattern 4; (5) In cases with borderline morphology between Gleason pattern 3 and pattern 4 and crush artifacts, the lower grade should be favored; (6) Branched glands are allowed in Gleason pattern 3; (7) Small solid cylinders represent Gleason pattern 5; (8) Solid medium to large nests with rosette-like spaces should be considered to represent Gleason pattern 5; and (9) Presence of unequivocal comedonecrosis, even if focal is indicative of Gleason pattern 5. It was recognized by both pathologists and clinicians that despite the above changes, there were deficiencies with the Gleason system. The Gleason grading system ranges from 2 to 10, yet 6 is the lowest score currently assigned. When patients are told that they have a Gleason score 6 out

  6. Central nervous system reactions to cervical myelography

    International Nuclear Information System (INIS)

    Vestergaard, A.; Dons, K.; Eskesen, V.; Kruse-Larsen, C.; Blatt Lyon, B.; Arlien Soeborg, P.; Jensen, N.O.; Praestholm, J.

    1991-01-01

    In a double blind prospective study of side effects to cervical myelography 38 patients were evaluated with neurologic examination, electroencephalography (EEG), brainstem evoked response (BER), somatosensory evoked responses (SSER), and continuous reaction times prior to and at 6 h and 24 h after myelography with either metrizamide or iohexol. A difference in the incidence of side effects (for example headache, dizziness, nausea, and neck pain) to the two different contrast media indicated that the inconveniences related to myelography were not only due to the spinal puncture. A contrast medium effect on the central nervous system varying from one agent to another was present. A high frequency of EEG deteriorations among patients with adverse clinical reactions and on only discrete affection upon BER indicated the reaction to be located to the cerebral cortex. Weakened tendon reflexes and reduced strength in the upper extremities were probably caused by blockade in the motor roots as SSER were normal indicating no affection of the sensory pathways. This hypothesis is in agreement with the fact the patients were in the prone position in the first phase of the investigation causing the highest concentration of contrast medium around the motor roots and the anterior part of the spinal cord. Difference in metabolic effect may explain differences in side effects of metrizamide and iohexol. (orig.)

  7. Central nervous system reactions to cervical myelography

    Energy Technology Data Exchange (ETDEWEB)

    Vestergaard, A; Dons, K; Eskesen, V; Kruse-Larsen, C; Blatt Lyon, B; Arlien Soeborg, P; Jensen, N O; Praestholm, J [Hvidovre Hospital (Denmark). Depts. of Diagnostic Radiology, Neurosurgery, Neurology, and Clinical Neurophysiology

    1991-09-01

    In a double blind prospective study of side effects to cervical myelography 38 patients were evaluated with neurologic examination, electroencephalography (EEG), brainstem evoked response (BER), somatosensory evoked responses (SSER), and continuous reaction times prior to and at 6 h and 24 h after myelography with either metrizamide or iohexol. A difference in the incidence of side effects (for example headache, dizziness, nausea, and neck pain) to the two different contrast media indicated that the inconveniences related to myelography were not only due to the spinal puncture. A contrast medium effect on the central nervous system varying from one agent to another was present. A high frequency of EEG deteriorations among patients with adverse clinical reactions and on only discrete affection upon BER indicated the reaction to be located to the cerebral cortex. Weakened tendon reflexes and reduced strength in the upper extremities were probably caused by blockade in the motor roots as SSER were normal indicating no affection of the sensory pathways. This hypothesis is in agreement with the fact the patients were in the prone position in the first phase of the investigation causing the highest concentration of contrast medium around the motor roots and the anterior part of the spinal cord. Difference in metabolic effect may explain differences in side effects of metrizamide and iohexol. (orig.).

  8. A New Grading System for the Management of Antenatal Hydronephrosis.

    Science.gov (United States)

    Dos Santos, Joana; Parekh, Rulan S; Piscione, Tino D; Hassouna, Tarek; Figueroa, Victor; Gonima, Paula; Vargas, Isis; Farhat, Walid; Rosenblum, Norman D

    2015-10-07

    Standard clinical assessments do not predict surgical intervention in patients with a moderate degree of upper tract hydronephrosis. This study investigated whether combined measures of renal calyceal dilation and anteroposterior diameter (APD) of the renal pelvis at the first postnatal ultrasound better predict surgical intervention beyond standard assessments of the APD or Society of Fetal Urology (SFU) grading system. A retrospective cohort of 348 children with antenatal hydronephrosis followed from 2003 to 2013 were studied. Using Cox regression, the risk for surgery by APD, SFU, and combined grading on the basis of the first postnatal ultrasound was calculated. The predictive capability of each grading system for surgery was determined by calculating the positive likelihood ratio (LR+). The combination of APD≥6-9 mm and diffuse caliectasis had a hazard ratio (HR) of 19.5 (95% confidence interval [95% CI], 3.94 to 96.9) versus 0.59 (95% CI, 0.05 to 6.53) for APD≥6-9 mm alone and a similar risk of 8.9 for SFU grade 3 (95% CI, 3.84 to 20.9). The combination of APD≥9-15 mm and diffuse caliectasis had an HR of 18.7 (95% CI, 4.36 to 80.4) versus 1.75 (95% CI, 0.29 to 10.5) for APD≥9-15 mm alone. The LR+ for surgery for diffuse caliectasis and APD≥6-9 mm was higher than for APD≥6-9 mm alone (HR=2.62; 95% CI, 0.87 to 7.94 versus HR=0.04; 95% CI, 0.01 to 0.32) and was higher for APD≥9-15 mm and diffuse caliectasis than APD≥9-15 mm alone (HR=2.0; 95% CI, 1.15 to 3.45 versus HR=0.14; 95% CI, 0.04 to 0.43). Both combined groups of moderate hydronephrosis (APD≥6-9 mm or ≥9-15 mm with diffuse caliectasis) had only slightly higher LR+ than SFU grade 3 (HR=1.89; 95% CI, 1.17 to 3.05). These results suggest a grading system combining APD and diffuse caliectasis distinguishes those children with moderate degrees of upper tract hydronephrosis that are at higher risk of surgery. Copyright © 2015 by the American Society of Nephrology.

  9. Statistical Outlier Detection for Jury Based Grading Systems

    DEFF Research Database (Denmark)

    Thompson, Mary Kathryn; Clemmensen, Line Katrine Harder; Rosas, Harvey

    2013-01-01

    This paper presents an algorithm that was developed to identify statistical outliers from the scores of grading jury members in a large project-based first year design course. The background and requirements for the outlier detection system are presented. The outlier detection algorithm...... and the follow-up procedures for score validation and appeals are described in detail. Finally, the impact of various elements of the outlier detection algorithm, their interactions, and the sensitivity of their numerical values are investigated. It is shown that the difference in the mean score produced...... by a grading jury before and after a suspected outlier is removed from the mean is the single most effective criterion for identifying potential outliers but that all of the criteria included in the algorithm have an effect on the outlier detection process....

  10. Lens subluxation grading system: predictive value for ectopia lentis surgical outcomes

    OpenAIRE

    Mauro Waiswol; Niro Kasahara

    2009-01-01

    Objective: To present a classification system to grade ectopia lentis and to assess its usefulness as a predictor for surgical outcomes. Methods: Fifty-one eyes of 28 patients with either simple (19 patients) or Marfan syndrome-associated ectopia lentis (nine patients) with variable degrees of subluxation were operated on. Lens subluxation intensity was graded according to the lens subluxation grading system (LSGS) from grade 1 (lens on the whole pupillary area) up to grade 4 (lens absent fro...

  11. Reliability of injury grading systems for patients with blunt splenic trauma

    NARCIS (Netherlands)

    Olthof, D. C.; van der Vlies, C. H.; Scheerder, M. J.; de Haan, R. J.; Beenen, L. F. M.; Goslings, J. C.; van Delden, O. M.

    2014-01-01

    The most widely used grading system for blunt splenic injury is the American Association for the Surgery of Trauma (AAST) organ injury scale. In 2007 a new grading system was developed. This 'Baltimore CT grading system' is superior to the AAST classification system in predicting the need for

  12. Distribution in flowing reaction-diffusion systems

    KAUST Repository

    Kamimura, Atsushi; Herrmann, Hans J.; Ito, Nobuyasu

    2009-01-01

    A power-law distribution is found in the density profile of reacting systems A+B→C+D and 2A→2C under a flow in two and three dimensions. Different densities of reactants A and B are fixed at both ends. For the reaction A+B, the concentration of reactants asymptotically decay in space as x-1/2 and x-3/4 in two dimensions and three dimensions, respectively. For 2A, it decays as log (x) /x in two dimensions. The decay of A+B is explained considering the effect of segregation of reactants in the isotropic case. The decay for 2A is explained by the marginal behavior of two-dimensional diffusion. A logarithmic divergence of the diffusion constant with system size is found in two dimensions. © 2009 The American Physical Society.

  13. Distribution in flowing reaction-diffusion systems

    KAUST Repository

    Kamimura, Atsushi

    2009-12-28

    A power-law distribution is found in the density profile of reacting systems A+B→C+D and 2A→2C under a flow in two and three dimensions. Different densities of reactants A and B are fixed at both ends. For the reaction A+B, the concentration of reactants asymptotically decay in space as x-1/2 and x-3/4 in two dimensions and three dimensions, respectively. For 2A, it decays as log (x) /x in two dimensions. The decay of A+B is explained considering the effect of segregation of reactants in the isotropic case. The decay for 2A is explained by the marginal behavior of two-dimensional diffusion. A logarithmic divergence of the diffusion constant with system size is found in two dimensions. © 2009 The American Physical Society.

  14. Relationships of nuclear, architectural and International Federation of Gynecology and Obstetrics grading systems in endometrial cancer.

    Science.gov (United States)

    Toptaş, Tayfun; Peştereli, Elif; Bozkurt, Selen; Erdoğan, Gülgün; Şimşek, Tayup

    2018-03-01

    To examine correlations among nuclear, architectural, and International Federation of Gynecology and Obstetrics (FIGO) grading systems, and their relationships with lymph node (LN) involvement in endometrioid endometrial cancer. Histopathology slides of 135 consecutive patients were reviewed with respect to tumor grade and LN metastasis. Notable nuclear atypia was defined as grade 3 nuclei. FIGO grade was established by raising the architectural grade (AG) by one grade when the tumor was composed of cells with nuclear grade (NG) 3. Correlations between the grading systems were analyzed using Spearman's rank correlation coefficients, and relationships of grading systems with LN involvement were assessed using logistic regression analysis. Correlation analysis revealed a significant and strongly positive relationship between FIGO and architectural grading systems (r=0.885, p=0.001); however, correlations of nuclear grading with the architectural (r=0.535, p=0.165) and FIGO grading systems (r=0.589, p=0.082) were moderate and statistically non-significant. Twenty-five (18.5%) patients had LN metastasis. LN involvement rates differed significantly between tumors with AG 1 and those with AG 2, and tumors with FIGO grade 1 and those with FIGO grade 2. In contrast, although the difference in LN involvement rates failed to reach statistical significance between tumors with NG 1 and those with NG 2, it was significant between NG 2 and NG 3 (p=0.042). Although all three grading systems were associated with LN involvement in univariate analyses, an independent relationship could not be established after adjustment for other confounders in multivariate analysis. Nuclear grading is significantly correlated with neither architectural nor FIGO grading systems. The differences in LN involvement rates in the nuclear grading system reach significance only in the setting of tumor cells with NG 3; however, none of the grading systems was an independent predictor of LN involvement.

  15. TSUNAMI analysis of the applicability of proposed experiments to reactor-grade and weapons-grade mixed-oxide systems

    International Nuclear Information System (INIS)

    Rearden, Bradley T.; Hopper, Calvin M.; Elam, Karla R.

    2005-01-01

    The applicability of proposed critical experiments for the criticality code validation of a series of prototypic reactor-grade and weapons-grade mixed-oxide systems has been assessed with the TSUNAMI methodology from SCALE 5. The application systems were proposed by the Nuclear Energy Agency (NEA) Organization for Economic Cooperation and Development (OECD) Working Party on Nuclear Criticality Safety MOX Experimental Needs Working Group. Forty-eight application systems were conceived to envelope the range of conditions in processing and fabrication of reactor-grade and weapons-grade MOX fuel. The applicability of 303 existing critical benchmarks to each of the 48 applications was assessed, and validation coverage was found to be lacking for certain applications. Two series of proposed critical experiments were also considered in this analysis. The TSUNAMI analysis has revealed that both series of proposed experiments are applicable to numerous configurations of the reactor-grade and weapons-grade systems. A detailed assessment of which experiments were revealed by TSUNAMI to be most applicable to specific prototypic fuel processing systems has been performed. (author)

  16. Reaction chemistry of nitrogen species in hydrothermal systems: Simple reactions, waste simulants, and actual wastes

    International Nuclear Information System (INIS)

    Dell'Orco, P.; Luan, L.; Proesmans, P.; Wilmanns, E.

    1995-01-01

    Results are presented from hydrothermal reaction systems containing organic components, nitrogen components, and an oxidant. Reaction chemistry observed in simple systems and in simple waste simulants is used to develop a model which presents global nitrogen chemistry in these reactive systems. The global reaction path suggested is then compared with results obtained for the treatment of an actual waste stream containing only C-N-0-H species

  17. Modeling and analyzing flow of third grade nanofluid due to rotating stretchable disk with chemical reaction and heat source

    Science.gov (United States)

    Hayat, T.; Ahmad, Salman; Khan, M. Ijaz; Alsaedi, A.

    2018-05-01

    This article addresses flow of third grade nanofluid due to stretchable rotating disk. Mass and heat transports are analyzed through thermophoresis and Brownian movement effects. Further the effects of heat generation and chemical reaction are also accounted. The obtained ODE's are tackled computationally by means of homotopy analysis method. Graphical outcomes are analyzed for the effects of different variables. The obtained results show that velocity reduces through Reynolds number and material parameters. Temperature and concentration increase with Brownian motion and these decrease by Reynolds number.

  18. Data-driven system to predict academic grades and dropout

    Science.gov (United States)

    Rovira, Sergi; Puertas, Eloi

    2017-01-01

    Nowadays, the role of a tutor is more important than ever to prevent students dropout and improve their academic performance. This work proposes a data-driven system to extract relevant information hidden in the student academic data and, thus, help tutors to offer their pupils a more proactive personal guidance. In particular, our system, based on machine learning techniques, makes predictions of dropout intention and courses grades of students, as well as personalized course recommendations. Moreover, we present different visualizations which help in the interpretation of the results. In the experimental validation, we show that the system obtains promising results with data from the degree studies in Law, Computer Science and Mathematics of the Universitat de Barcelona. PMID:28196078

  19. Visual application of the American Board of Orthodontics Grading System.

    Science.gov (United States)

    Scott, Steven A; Freer, Terry J

    2005-05-01

    Assessment of treatment outcomes has traditionally been accomplished using the subjective opinion of experienced clinicians. Reduced subjectivity in the assessment of orthodontic treatment can be achieved with the use of an occlusal index. To implement an index for quality assurance purposes is time-consuming and subject to the inherent error of the index. Quality assessment of orthodontic treatment on a routine basis has been difficult to implement in private practice. To investigate whether a clinician can accurately apply the American Board of Orthodontics Objective Grading System by direct visual inspection instead of measuring individual traits. A random sample of 30 cases was selected, including pretreatment and post-treatment upper and lower study casts and panoramic radiographs. The cases were examined and scored with the standardized measuring gauge according to the protocol provided by the American Board of Orthodontics (ABO). The records were re-examined 6 weeks later and the individual traits scored by visual inspection (VI). There were no significant differences between the pre- and post-treatment ABO gauge and VI scores. This study suggests that occlusal traits defined by the ABO Objective Grading System can be accurately assessed by visual inspection. The VI score provides a simple and convenient method for critical evaluation of treatment outcome by a clinician.

  20. Comparative Analysis of Clinical Samples Showing Weak Serum Reaction on AutoVue System Causing ABO Blood Typing Discrepancies.

    Science.gov (United States)

    Jo, Su Yeon; Lee, Ju Mi; Kim, Hye Lim; Sin, Kyeong Hwa; Lee, Hyeon Ji; Chang, Chulhun Ludgerus; Kim, Hyung Hoi

    2017-03-01

    ABO blood typing in pre-transfusion testing is a major component of the high workload in blood banks that therefore requires automation. We often experienced discrepant results from an automated system, especially weak serum reactions. We evaluated the discrepant results by the reference manual method to confirm ABO blood typing. In total, 13,113 blood samples were tested with the AutoVue system; all samples were run in parallel with the reference manual method according to the laboratory protocol. The AutoVue system confirmed ABO blood typing of 12,816 samples (97.7%), and these results were concordant with those of the manual method. The remaining 297 samples (2.3%) showed discrepant results in the AutoVue system and were confirmed by the manual method. The discrepant results involved weak serum reactions (serum reactions, samples from patients who had received stem cell transplants, ABO subgroups, and specific system error messages. Among the 98 samples showing ≤1+ reaction grade in the AutoVue system, 70 samples (71.4%) showed a normal serum reaction (≥2+ reaction grade) with the manual method, and 28 samples (28.6%) showed weak serum reaction in both methods. ABO blood tying of 97.7% samples could be confirmed by the AutoVue system and a small proportion (2.3%) needed to be re-evaluated by the manual method. Samples with a 2+ reaction grade in serum typing do not need to be evaluated manually, while those with ≤1+ reaction grade do.

  1. ALBI versus Child-Pugh grading systems for liver function in patients with hepatocellular carcinoma.

    Science.gov (United States)

    Na, Seong K; Yim, Sun Y; Suh, Sang J; Jung, Young K; Kim, Ji H; Seo, Yeon S; Yim, Hyung J; Yeon, Jong E; Byun, Kwan S; Um, Soon H

    2018-04-01

    The prognostic performance of the albumin-bilirubin (ALBI) grade in hepatocellular carcinoma (HCC) as an objective method of assessing liver function was investigated. Data from 2099 patients with HCC in Korea were collected and analyzed retrospectively. The discriminative performance of ALBI grade was compared with Child-Pugh (C-P) grade for different stages or treatments. The median follow up duration was 16.2 months (range: 1.0-124.9). The median survival times were 49.7 months for C-P grade A (65.8%), 12.4 months for C-P grade B (25.5%), and 4.2 months for C-P grade C (8.6%) (P < 0.001). The median survival times were 84.2 months for ALBI grade 1 (32.8%), 25.5 months for ALBI grade 2 (53.5%), and 7.7 months for ALBI grade 3 (13.7%) (P < 0.001). In early UICC stages, ALBI grade showed better discriminative performance than C-P grade. In curative treatments, ALBI grade also showed better discriminative performance than C-P grade (Harrell's C: 0.624 (C-P grade) vs 0.667 [ALBI grade]). ALBI grade provided better prognostic performance in survival analysis and better distribution of the grades than C-P grade in HCC, suggesting that ALBI grade could be a good alternative grading system for liver function in patients with HCC. © 2018 Wiley Periodicals, Inc.

  2. Findings of the inspection grading system on industrial radiography

    International Nuclear Information System (INIS)

    Gloria Doloressa

    2011-01-01

    The use of industrial radiography techniques evolve rapidly and widely. Various jobs in industry require the examination of welding techniques / connecting pipes and metal construction. The use of industrial radiography is one type of utilization of nuclear energy must get control so that its use does not cause harmful impacts to worker safety, community, and environment. Regulations is done through inspections, in order to supervise the observance of the terms in the licensing and legislation in the field of nuclear safety. The main purpose of inspection is to ensure the utilization of radiation sources of radiation have been used with. Findings of the inspection is a decline in the performance of licensees in meeting safety requirements. The Grading System to the findings of the inspection needs to be done to improve the effectiveness and efficiency of inspection, and it is expected that the company can improve the management of radiation safety. (author)

  3. Reliability of injury grading systems for patients with blunt splenic trauma.

    Science.gov (United States)

    Olthof, D C; van der Vlies, C H; Scheerder, M J; de Haan, R J; Beenen, L F M; Goslings, J C; van Delden, O M

    2014-01-01

    The most widely used grading system for blunt splenic injury is the American Association for the Surgery of Trauma (AAST) organ injury scale. In 2007 a new grading system was developed. This 'Baltimore CT grading system' is superior to the AAST classification system in predicting the need for angiography and embolization or surgery. The objective of this study was to assess inter- and intraobserver reliability between radiologists in classifying splenic injury according to both grading systems. CT scans of 83 patients with blunt splenic injury admitted between 1998 and 2008 to an academic Level 1 trauma centre were retrospectively reviewed. Inter and intrarater reliability were expressed in Cohen's or weighted Kappa values. Overall weighted interobserver Kappa coefficients for the AAST and 'Baltimore CT grading system' were respectively substantial (kappa=0.80) and almost perfect (kappa=0.85). Average weighted intraobserver Kappa's values were in the 'almost perfect' range (AAST: kappa=0.91, 'Baltimore CT grading system': kappa=0.81). The present study shows that overall the inter- and intraobserver reliability for grading splenic injury according to the AAST grading system and 'Baltimore CT grading system' are equally high. Because of the integration of vascular injury, the 'Baltimore CT grading system' supports clinical decision making. We therefore recommend use of this system in the classification of splenic injury. Copyright © 2012 Elsevier Ltd. All rights reserved.

  4. Mass transfer with chemical reaction in multiphase systems

    International Nuclear Information System (INIS)

    Alper, E.

    1983-01-01

    These volumes deal with the phenomenon of 'mass transfer with chemical reaction' which is of industrial, biological and physiological importance. In process engineering, it is encountered both in separation processes and in reaction engineering and both aspects are covered here in four sections: introduction; gas-liquid system; liquid-liquid system; and gas-liquid-solid system

  5. Nonlinear analysis of a reaction-diffusion system: Amplitude equations

    Energy Technology Data Exchange (ETDEWEB)

    Zemskov, E. P., E-mail: zemskov@ccas.ru [Russian Academy of Sciences, Dorodnicyn Computing Center (Russian Federation)

    2012-10-15

    A reaction-diffusion system with a nonlinear diffusion term is considered. Based on nonlinear analysis, the amplitude equations are obtained in the cases of the Hopf and Turing instabilities in the system. Turing pattern-forming regions in the parameter space are determined for supercritical and subcritical instabilities in a two-component reaction-diffusion system.

  6. Will Instructors Save Time Using a Specifications Grading System?

    Directory of Open Access Journals (Sweden)

    Sarah Grace Prescott

    2015-08-01

    Full Text Available Review of: Specifications Grading: Restoring Rigor, Motivating Students, and Saving Faculty Time; Linda Nilson and Claudia J. Stranny; (2014. Stylus Publishing, Sterling, VA. 184 pages.

  7. Development of Chemistry Triangle Oriented Module on Topic of Reaction Rate for Senior High School Level Grade XI Chemistry Learning.

    Science.gov (United States)

    Sari, D. R.; Hardeli; Bayharti

    2018-04-01

    This study aims to produce chemistry triangle oriented module on topic of reaction rate, and to reveal the validity and practicality level of the generated module. The type of research used is EducationalDesign Research (EDR) with development model is Plompmodel. This model consists of three phases, which are preliminary research, prototyping phase, and assessment phase. The instrument used in this research is questionnaire validity and practicality. The data of the research were analyzed by using Kappa Cohen formula. The chemistry triangle oriented module validation sheet was given to 5 validators consisting of 3 chemistry lecturers and 2 high school chemistry teachers, while the practicality sheet was given to 2 chemistry teachers, 6 students of SMAN 10 Padang grade XII MIA 5 on the small groupevaluation and 25 students of SMAN 10 Padang grade XII MIA 6 on the field test. Based on the questionnaire validity analysis, the validity level of the module is very high with the value of kappa moment 0.87. The level of practicality based on teacher questionnaire response is very high category with a kappa moment value 0.96. Based on the questionnaire of student responses on small group evaluation, the level of practicality is very high category with a kappa moment 0.81, and the practicality is very high category with kappa moment value 0.83 based on questionnaire of student response on field test.

  8. Grading the severity of soft tissue changes associated with metal-on-metal hip replacements: reliability of an MR grading system

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Helen; Cahir, John G.; Goodwin, Richard W. [Norfolk and Norwich University Hospital, Department of Radiology, Norwich, Norfolk (United Kingdom); Toms, Andoni Paul [Norfolk and Norwich University Hospital, Department of Radiology, Norwich, Norfolk (United Kingdom); Norwich Radiology Academy, Norwich (United Kingdom); Wimhurst, James; Nolan, John F. [Norfolk and Norwich University Hospital, Department of Orthopaedics, Norwich, Norfolk (United Kingdom)

    2011-03-15

    Metal-on-metal (MoM) soft tissue reactions or aseptic lymphocytic vasculitis-associated lesions (ALVAL) are being recognised using metal artefact reduction (MAR) MR with increasing frequency following the advent of second generation metal-on-metal bearings, but there is no standardised technique for reporting of MR appearances in this disease. The aim of this study was to measure the reliability of a grading system designed for scoring the severity of MoM disease on MRI. MRI examinations of 73 hips in 59 patients were retrospectively selected and then anonymised, randomised and reviewed by three independent observers (musculoskeletal radiologists). Each MR examination was scored as either A: normal, B: infection, C1: mild MoM disease, C2: moderate MoM disease or C3: severe MoM disease according to pre-defined criteria. Kappa correlation statistics were used to compare the observations. There was substantial agreement among all three observers; the correlation coefficient between the two most experienced observers was {kappa} = 0.78 [95% confidence intervals (CI): 0.68-0.88] and when compared with the least experienced observer coefficients were {kappa} = 0.69 (95% CI: 0.57-0.80) and {kappa} = 0.66 (95% CI: 0.54-0.78). The strongest correlation occurred for grades A, C2 and C3. The weakest correlations occurred for grades B and C1. The grading system described in this study is reliable for evaluating ALVAL in MoM prostheses using MR but is limited in differentiating mild disease from infection. (orig.)

  9. Chemical Looping Combustion Reactions and Systems

    Energy Technology Data Exchange (ETDEWEB)

    Sarofim, Adel; Lighty, JoAnn; Smith, Philip; Whitty, Kevin; Eyring, Edward; Sahir, Asad; Alvarez, Milo; Hradisky, Michael; Clayton, Chris; Konya, Gabor; Baracki, Richard; Kelly, Kerry

    2014-03-01

    , they performed a sensitivity analysis for velocity, height and polydispersity and compared results against literature data for experimental studies of CLC beds with no reaction. Finally, they present an optimization space using simple non-reactive configurations. In Subtask 5.3, through a series of experimental studies, behavior of a variety of oxygen carriers with different loadings and manufacturing techniques was evaluated under both oxidizing and reducing conditions. The influences of temperature, degree of carrier conversion and thermodynamic driving force resulting from the difference between equilibrium and system O{sub 2} partial pressures were evaluated through several experimental campaigns, and generalized models accounting for these influences were developed to describe oxidation and oxygen release. Conversion of three solid fuels with widely ranging reactivities was studied in a small fluidized bed system, and all but the least reactive fuel (petcoke) were rapidly converted by oxygen liberated from the CLOU carrier. Attrition propensity of a variety of carriers was also studied, and the carriers produced by freeze granulation or impregnation of preformed substrates displayed the lowest rates of attrition. Subtask 5.4 focused on gathering kinetic data for a copper-based oxygen carrier to assist with modeling of a functioning chemical looping reactor. The kinetics team was also responsible for the development and analysis of supported copper oxygen carrier material.

  10. Propagating fronts in reaction-transport systems with memory

    Energy Technology Data Exchange (ETDEWEB)

    Yadav, A. [Department of Chemistry, Southern Methodist University, Dallas, TX 75275-0314 (United States)], E-mail: ayadav1@lsu.edu; Fedotov, Sergei [School of Mathematics, University of Manchester, Manchester M60 1DQ (United Kingdom)], E-mail: sergei.fedotov@manchester.ac.uk; Mendez, Vicenc [Grup de Fisica Estadistica, Departament de Fisica, Universitat Autonoma de Barcelona, E-08193 Bellaterra (Spain)], E-mail: vicenc.mendez@uab.es; Horsthemke, Werner [Department of Chemistry, Southern Methodist University, Dallas, TX 75275-0314 (United States)], E-mail: whorsthe@smu.edu

    2007-11-26

    In reaction-transport systems with non-standard diffusion, the memory of the transport causes a coupling of reactions and transport. We investigate the effect of this coupling for systems with Fisher-type kinetics and obtain a general analytical expression for the front speed. We apply our results to the specific case of subdiffusion.

  11. CT grading systems as a predictor of successful nonoperative treatment of splenic trauma

    International Nuclear Information System (INIS)

    Umlas, S.L.; Cronan, J.J.

    1990-01-01

    PURPOSE: Selective nonoperative management of splenic trauma yields benefits with regard to preservation of the body's defense systems. This paper evaluates the capability of CT grading systems to predict successful non- operative management of splenic trauma in children and adults. Fifty-six patients with documented splenic injury were assessed with CT following standard trauma protocols. Each of these CT scans were graded according to the three recently proposed splenic trauma systems. The charts of these patients were then reviewed, and correlations between the CT grade and the clinical outcome were determined for each of these three grading systems

  12. Machine assisted reaction optimization: A self-optimizing reactor system for continuous-flow photochemical reactions

    KAUST Repository

    Poscharny, K.; Fabry, D.C.; Heddrich, S.; Sugiono, E.; Liauw, M.A.; Rueping, Magnus

    2018-01-01

    A methodology for the synthesis of oxetanes from benzophenone and furan derivatives is presented. UV-light irradiation in batch and flow systems allowed the [2 + 2] cycloaddition reaction to proceed and a broad range of oxetanes could be synthesized in manual and automated fashion. The identification of high-yielding reaction parameters was achieved through a new self-optimizing photoreactor system.

  13. Machine assisted reaction optimization: A self-optimizing reactor system for continuous-flow photochemical reactions

    KAUST Repository

    Poscharny, K.

    2018-04-07

    A methodology for the synthesis of oxetanes from benzophenone and furan derivatives is presented. UV-light irradiation in batch and flow systems allowed the [2 + 2] cycloaddition reaction to proceed and a broad range of oxetanes could be synthesized in manual and automated fashion. The identification of high-yielding reaction parameters was achieved through a new self-optimizing photoreactor system.

  14. Ceramic/polymer functionally graded material (FGM) lightweight armor system

    Energy Technology Data Exchange (ETDEWEB)

    Petrovic, J.J.; McClellan, K.J.

    1998-12-31

    This is the final report of a two-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Functionally graded material is an enabling technology for lightweight body armor improvements. The objective was to demonstrate the ability to produce functionally graded ceramic-polymer and ceramic-metal lightweight armor materials. This objective involved two aspects. The first and key aspect was the development of graded-porosity boron-carbide ceramic microstructures. The second aspect was the development of techniques for liquid infiltration of lightweight metals and polymers into the graded-porosity ceramic. The authors were successful in synthesizing boron-carbide ceramic microstructures with graded porosity. These graded-porosity boron-carbide hot-pressed pieces were then successfully liquid-infiltrated in vacuum with molten aluminum at 1,300 C, and with liquid polymers at room temperature. Thus, they were able to demonstrate the feasibility of producing boron carbide-aluminum and boron carbide-polymer functionally graded materials.

  15. Quantitative assessment of graded burn wounds using a commercial and research grade laser speckle imaging (LSI) system

    Science.gov (United States)

    Ponticorvo, A.; Rowland, R.; Yang, B.; Lertsakdadet, B.; Crouzet, C.; Bernal, N.; Choi, B.; Durkin, A. J.

    2017-02-01

    Burn wounds are often characterized by injury depth, which then dictates wound management strategy. While most superficial burns and full thickness burns can be diagnosed through visual inspection, clinicians experience difficulty with accurate diagnosis of burns that fall between these extremes. Accurately diagnosing burn severity in a timely manner is critical for starting the appropriate treatment plan at the earliest time points to improve patient outcomes. To address this challenge, research groups have studied the use of commercial laser Doppler imaging (LDI) systems to provide objective characterization of burn-wound severity. Despite initial promising findings, LDI systems are not commonplace in part due to long acquisition times that can suffer from artifacts in moving patients. Commercial LDI systems are being phased out in favor of laser speckle imaging (LSI) systems that can provide similar information with faster acquisition speeds. To better understand the accuracy and usefulness of commercial LSI systems in burn-oriented research, we studied the performance of a commercial LSI system in three different sample systems and compared its results to a research-grade LSI system in the same environments. The first sample system involved laboratory measurements of intralipid (1%) flowing through a tissue simulating phantom, the second preclinical measurements in a controlled burn study in which wounds of graded severity were created on a Yorkshire pig, and the third clinical measurements involving a small sample of clinical patients. In addition to the commercial LSI system, a research grade LSI system that was designed and fabricated in our labs was used to quantitatively compare the performance of both systems and also to better understand the "Perfusion Unit" output of commercial systems.

  16. Mars Ascent Vehicle Reaction Control System, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — During this Phase I NASA program, Valley Tech Systems (VTS) will develop an innovative solid Reaction Control System (RCS) architecture concept design that can...

  17. Revisions of the Learning Mastery Systems for the Harper and Row Grades One and Two and the Macmillan Bank Street Grade One Reading Series.

    Science.gov (United States)

    Maeder, Jacqueline; And Others

    The revisions on the Learning Mastery Systems (LMSs) for the Harper & Row grade-one and grade-two and the Macmillan Bank Street grade-one reading programs are outlined in this document. A rationale for the revisions is presented. An LMS is a set of materials and procedures prepared by the southwest Regional Laboratory (SWRL) as an…

  18. Web-Based Problem-Solving Assignment and Grading System

    Science.gov (United States)

    Brereton, Giles; Rosenberg, Ronald

    2014-11-01

    In engineering courses with very specific learning objectives, such as fluid mechanics and thermodynamics, it is conventional to reinforce concepts and principles with problem-solving assignments and to measure success in problem solving as an indicator of student achievement. While the modern-day ease of copying and searching for online solutions can undermine the value of traditional assignments, web-based technologies also provide opportunities to generate individualized well-posed problems with an infinite number of different combinations of initial/final/boundary conditions, so that the probability of any two students being assigned identical problems in a course is vanishingly small. Such problems can be designed and programmed to be: single or multiple-step, self-grading, allow students single or multiple attempts; provide feedback when incorrect; selectable according to difficulty; incorporated within gaming packages; etc. In this talk, we discuss the use of a homework/exam generating program of this kind in a single-semester course, within a web-based client-server system that ensures secure operation.

  19. Functionally graded biomimetic energy absorption concept development for transportation systems.

    Science.gov (United States)

    2014-02-01

    Mechanics of a functionally graded cylinder subject to static or dynamic axial loading is considered, including a potential application as energy absorber. The mass density and stiffness are power functions of the radial coordinate as may be the case...

  20. An endoscopic mucosal grading system is predictive of leak in stapled rectal anastomoses.

    Science.gov (United States)

    Sujatha-Bhaskar, Sarath; Jafari, Mehraneh D; Hanna, Mark; Koh, Christina Y; Inaba, Colette S; Mills, Steven D; Carmichael, Joseph C; Nguyen, Ninh T; Stamos, Michael J; Pigazzi, Alessio

    2018-04-01

    Anastomotic leak is a devastating postoperative complication following rectal anastomoses associated with significant clinical and oncological implications. As a result, there is a need for novel intraoperative methods that will help predict anastomotic leak. From 2011 to 2014, patient undergoing rectal anastomoses by colorectal surgeons at our institution underwent prospective application of intraoperative flexible endoscopy with mucosal grading. Retrospective review of patient medical records was performed. After creation of the colorectal anastomosis, application of a three-tier endoscopic mucosal grading system occurred. Grade 1 was defined as circumferentially normal appearing peri-anastomotic mucosa. Grade 2 was defined as ischemia or congestion involving 30% of the colon or rectal mucosa or ischemia/congestion involving both sides of the staple line. From 2011 to 2014, a total of 106 patients were reviewed. Grade 1 anastomoses were created in 92 (86.7%) patients and Grade 2 anastomoses were created in 10 (9.4%) patients. All 4 (3.8%) Grade 3 patients underwent immediate intraoperative anastomosis takedown and re-creation, with subsequent re-classification as Grade 1. Demographic and comorbidity data were similar between Grade 1 and Grade 2 patients. Anastomotic leak rate for the entire cohort was 12.2%. Grade 1 patients demonstrated a leak rate of 9.4% (9/96) and Grade 2 patients demonstrated a leak rate of 40% (4/10). Multivariate logistic regression associated Grade 2 classification with an increased risk of anastomotic leak (OR 4.09, 95% CI 1.21-13.63, P = 0.023). Endoscopic mucosal grading is a feasible intraoperative technique that has a role following creation of a rectal anastomosis. Identification of a Grade 2 or Grade 3 anastomosis should provoke strong consideration for immediate intraoperative revision.

  1. Versatile Dual Photoresponsive System for Precise Control of Chemical Reactions.

    Science.gov (United States)

    Xu, Can; Bing, Wei; Wang, Faming; Ren, Jinsong; Qu, Xiaogang

    2017-08-22

    A versatile method for photoregulation of chemical reactions was developed through a combination of near-infrared (NIR) and ultraviolet (UV) light sensitive materials. This regulatory effect was achieved through photoresponsive modulation of reaction temperature and pH values, two prominent factors influencing reaction kinetics. Photothermal nanomaterial graphene oxide (GO) and photobase reagent malachite green carbinol base (MGCB) were selected for temperature and pH regulation, respectively. Using nanocatalyst- and enzyme-mediated chemical reactions as model systems, we demonstrated the feasibility and high efficiency of this method. In addition, a photoresponsive, multifunctional "Band-aid"-like hydrogel platform was presented for programmable wound healing. Overall, this simple, efficient, and reversible system was found to be effective for controlling a wide variety of chemical reactions. Our work may provide a method for remote and sustainable control over chemical reactions for industrial and biomedical applications.

  2. Grading system for migrated lumbar disc herniation on sagittal magnetic resonance imaging. An agreement study

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Y.; Jeong, T.S. [Gachon University Gil Medical Center, Department of Neurosurgery, Incheon (Korea, Republic of); Lim, T.; Jeon, J.Y. [Gachon University Gil Medical Center, Department of Radiology, Incheon (Korea, Republic of)

    2018-01-15

    Migrated lumbar disc herniations (LDHs) in the sagittal plane are common. Disc migration grading can be applied as a useful measurement tool in the diagnosis, treatment, and outcome evaluation of migrated LDH. No study has evaluated the reliability of migrated LDH grading. We evaluated the reliability and functionality of the current magnetic resonance imaging (MRI) grading system for migrated LDH. We assessed a six-level grading system developed based on sagittal MRI and graded according to the direction (rostral and caudal) and degree (low, high, and very high) of disc migration. One-hundred and one migrated LDHs treated with minimally invasive endoscopic discectomy were analyzed independently by two experienced radiologists. Intraobserver and interobserver agreements were assessed by kappa statistics. The most common migrated LDH grade was grade 4 (30.94%; caudal, low-grade migration). Rostral and caudal migrations were more common in the upper and lower lumbar levels, respectively. Interobserver agreement in the grading of migrated LDH was good at both the first (kappa = 0.737) and second assessment (kappa = 0.657). The intraobserver agreement for reader 1 was very good (kappa = 0.827) and for reader 2 was good (kappa = 0.620). The current grading system for migrated LDH was found to be reliable and functional with good interobserver and intraobserver agreement. It may be useful in the interpretation of disc migration patterns and outcomes of various minimally invasive surgical procedures. (orig.)

  3. A Contemporary Prostate Cancer Grading System: A Validated Alternative to the Gleason Score

    Science.gov (United States)

    Epstein, Jonathan I.; Zelefsky, Michael J.; Sjoberg, Daniel D.; Nelson, Joel B.; Egevad, Lars; Magi-Galluzzi, Cristina; Vickers, Andrew J.; Parwani, Anil V.; Reuter, Victor E.; Fine, Samson W.; Eastham, James A.; Wiklund, Peter; Han, Misop; Reddy, Chandana A.; Ciezki, Jay P.; Nyberg, Tommy; Klein, Eric A.

    2016-01-01

    Background Despite revisions in 2005 and 2014, the Gleason prostate cancer (PCa) grading system still has major deficiencies. Combining of Gleason scores into a three-tiered grouping (6, 7, 8–10) is used most frequently for prognostic and therapeutic purposes. The lowest score, assigned 6, may be misunderstood as a cancer in the middle of the grading scale, and 3 + 4 = 7 and 4 + 3 = 7 are often considered the same prognostic group. Objective To verify that a new grading system accurately produces a smaller number of grades with the most significant prognostic differences, using multi-institutional and multimodal therapy data. Design, setting, and participants Between 2005 and 2014, 20 845 consecutive men were treated by radical prostatectomy at five academic institutions; 5501 men were treated with radiotherapy at two academic institutions. Outcome measurements and statistical analysis Outcome was based on biochemical recurrence (BCR). The log-rank test assessed univariable differences in BCR by Gleason score. Separate univariable and multivariable Cox proportional hazards used four possible categorizations of Gleason scores. Results and limitations In the surgery cohort, we found large differences in recurrence rates between both Gleason 3 + 4 versus 4 + 3 and Gleason 8 versus 9. The hazard ratios relative to Gleason score 6 were 1.9, 5.1, 8.0, and 11.7 for Gleason scores 3 + 4, 4 + 3, 8, and 9–10, respectively. These differences were attenuated in the radiotherapy cohort as a whole due to increased adjuvant or neoadjuvant hormones for patients with high-grade disease but were clearly seen in patients undergoing radiotherapy only. A five–grade group system had the highest prognostic discrimination for all cohorts on both univariable and multivariable analysis. The major limitation was the unavoidable use of prostate-specific antigen BCR as an end point as opposed to cancer-related death. Conclusions The new PCa grading system has these benefits: more

  4. Pattern formation in reaction diffusion systems with finite geometry

    International Nuclear Information System (INIS)

    Borzi, C.; Wio, H.

    1990-04-01

    We analyze the one-component, one-dimensional, reaction-diffusion equation through a simple inverse method. We confine the system and fix the boundary conditions as to induce pattern formation. We analyze the stability of those patterns. Our goal is to get information about the reaction term out of the preknowledgment of the pattern. (author). 5 refs

  5. Analytically solvable models of reaction-diffusion systems

    Energy Technology Data Exchange (ETDEWEB)

    Zemskov, E P; Kassner, K [Institut fuer Theoretische Physik, Otto-von-Guericke-Universitaet, Universitaetsplatz 2, 39106 Magdeburg (Germany)

    2004-05-01

    We consider a class of analytically solvable models of reaction-diffusion systems. An analytical treatment is possible because the nonlinear reaction term is approximated by a piecewise linear function. As particular examples we choose front and pulse solutions to illustrate the matching procedure in the one-dimensional case.

  6. The Impact of Framing Effect on Student Preferences for University Grading Systems

    Science.gov (United States)

    Smith, Jeffrey K.; Smith, Lisa F.

    2009-01-01

    Kahneman and Tversky's (1979, 2000; Tversky & Kahneman, 1981) work in decision-making was applied to student preferences for grading practices. Undergraduate psychology students (n = 240) were randomly assigned to 1 of 3 framing conditions related to how a university course might be graded: a 100 point system, a percentage system, and an open…

  7. Recent developments in biocatalysis in multiphasic ionic liquid reaction systems.

    Science.gov (United States)

    Meyer, Lars-Erik; von Langermann, Jan; Kragl, Udo

    2018-06-01

    Ionic liquids are well known and frequently used 'designer solvents' for biocatalytic reactions. This review highlights recent achievements in the field of multiphasic ionic liquid-based reaction concepts. It covers classical biphasic systems including supported ionic liquid phases, thermo-regulated multi-component solvent systems (TMS) and polymerized ionic liquids. These powerful concepts combine unique reaction conditions with a high potential for future applications on a laboratory and industrial scale. The presence of a multiphasic system simplifies downstream processing due to the distribution of the catalyst and reactants in different phases.

  8. Studies on classifying Indian coals. Part II. A new system for grading and pricing

    Energy Technology Data Exchange (ETDEWEB)

    Tumuluri, S.G.; Shrikhande, S.K.; Rao, S.K.; Haque, R.

    1985-07-01

    The new system is self-complete through grading to pricing. It grades non-coking coal by moisture and ash contents. Coking coal is graded by GKLT coke type and ash content. Volatile matter content is used as a supporting indexer, where necessary. Through the grade data, a coal is evaluated into a single numeral which depicts the coaly matter content and its nature or effectiveness. This value, called effective coaly matter, is converted to a relative rupee value or price index/price. Pragmatics and versatility of the system are discussed.

  9. Implementation of 5E Inquiry Incorporated with Analogy Learning Approach to Enhance Conceptual Understanding of Chemical Reaction Rate for Grade 11 Students

    Science.gov (United States)

    Supasorn, Saksri; Promarak, Vinich

    2015-01-01

    The main purpose of this study was to enhance student understanding of the scientific concepts of chemical reaction rate. Forty-four grade 11 students were the target group. The treatment tools were seven learning plans of 5E inquiry incorporated with an analogy learning approach during 15 hours of class time. In each learning plan, the students…

  10. A proposed grading system for standardizing tumor consistency of intracranial meningiomas.

    Science.gov (United States)

    Zada, Gabriel; Yashar, Parham; Robison, Aaron; Winer, Jesse; Khalessi, Alexander; Mack, William J; Giannotta, Steven L

    2013-12-01

    Tumor consistency plays an important and underrecognized role in the surgeon's ability to resect meningiomas, especially with evolving trends toward minimally invasive and keyhole surgical approaches. Aside from descriptors such as "hard" or "soft," no objective criteria exist for grading, studying, and conveying the consistency of meningiomas. The authors designed a practical 5-point scale for intraoperative grading of meningiomas based on the surgeon's ability to internally debulk the tumor and on the subsequent resistance to folding of the tumor capsule. Tumor consistency grades and features are as follows: 1) extremely soft tumor, internal debulking with suction only; 2) soft tumor, internal debulking mostly with suction, and remaining fibrous strands resected with easily folded capsule; 3) average consistency, tumor cannot be freely suctioned and requires mechanical debulking, and the capsule then folds with relative ease; 4) firm tumor, high degree of mechanical debulking required, and capsule remains difficult to fold; and 5) extremely firm, calcified tumor, approaches density of bone, and capsule does not fold. Additional grading categories included tumor heterogeneity (with minimum and maximum consistency scores) and a 3-point vascularity score. This grading system was prospectively assessed in 50 consecutive patients undergoing craniotomy for meningioma resection by 2 surgeons in an independent fashion. Grading scores were subjected to a linear weighted kappa analysis for interuser reliability. Fifty patients (100 scores) were included in the analysis. The mean maximal tumor diameter was 4.3 cm. The distribution of overall tumor consistency scores was as follows: Grade 1, 4%; Grade 2, 9%; Grade 3, 43%; Grade 4, 44%; and Grade 5, 0%. Regions of Grade 5 consistency were reported only focally in 14% of heterogeneous tumors. Tumors were designated as homogeneous in 68% and heterogeneous in 32% of grades. The kappa analysis score for overall tumor consistency

  11. Modeling Reaction Control System Effects on Mars Odyssey

    National Research Council Canada - National Science Library

    Hanna, Jill

    2002-01-01

    ...) simulations to determine rotational motion of the spacecraft. The main objective of this study was to assess the reaction control system models and their effects on the atmospheric flight of Odyssey...

  12. Stability Analysis of a Reaction-Diffusion System Modeling Atherogenesis

    KAUST Repository

    Ibragimov, Akif; Ritter, Laura; Walton, Jay R.

    2010-01-01

    This paper presents a linear, asymptotic stability analysis for a reaction-diffusionconvection system modeling atherogenesis, the initiation of atherosclerosis, as an inflammatory instability. Motivated by the disease paradigm articulated by Ross

  13. Safety Review related to Commercial Grade Digital Equipment in Safety System

    International Nuclear Information System (INIS)

    Yu, Yeongjin; Park, Hyunshin; Yu, Yeongjin; Lee, Jaeheung

    2013-01-01

    The upgrades or replacement of I and C systems on safety system typically involve digital equipment developed in accordance with non-nuclear standards. However, the use of commercial grade digital equipment could include the vulnerability for software common-mode failure, electromagnetic interference and unanticipated problems. Although guidelines and standards for dedication methods of commercial grade digital equipment are provided, there are some difficulties to apply the methods to commercial grade digital equipment for safety system. This paper focuses on regulatory guidelines and relevant documents for commercial grade digital equipment and presents safety review experiences related to commercial grade digital equipment in safety system. This paper focuses on KINS regulatory guides and relevant documents for dedication of commercial grade digital equipment and presents safety review experiences related to commercial grade digital equipment in safety system. Dedication including critical characteristics is required to use the commercial grade digital equipment on safety system in accordance with KEPIC ENB 6370 and EPRI TR-106439. The dedication process should be controlled in a configuration management process. Appropriate methods, criteria and evaluation result should be provided to verify acceptability of the commercial digital equipment used for safety function

  14. Severe febrile systemic reaction to pneumococcal vaccine.

    Science.gov (United States)

    Hasan, Syed; Yousef, Mahmoud; Shridharani, Sachin

    2005-02-01

    Polyvalent pneumococcal polysaccharide vaccine (Pneumovax, PPV) has been shown to substantially reduce the risk of Streptococcus pneumoniae infections in susceptible individuals. Side effects, such as mild local erythema, induration, pain and fever, have been reported with various frequencies. Rarely, systemic symptoms, including high fever, headache, nausea and photophobia, have been reported in the literature. This case report describes a 38-year-old male who developed severe and prolonged local and systemic symptoms necessitating hospitalization following a dose of pneumovax.

  15. Splitting Schemes & Segregation In Reaction-(Cross-)Diffusion Systems

    OpenAIRE

    Carrillo, José A.; Fagioli, Simone; Santambrogio, Filippo; Schmidtchen, Markus

    2017-01-01

    One of the most fascinating phenomena observed in reaction-diffusion systems is the emergence of segregated solutions, i.e. population densities with disjoint supports. We analyse such a reaction cross-diffusion system. In order to prove existence of weak solutions for a wide class of initial data without restriction about their supports or their positivity, we propose a variational splitting scheme combining ODEs with methods from optimal transport. In addition, this approach allows us to pr...

  16. Elastic and inelastic pion reactions on few nucleon systems

    International Nuclear Information System (INIS)

    Lensky, V.

    2007-01-01

    In the present work, we are studying elastic and inelastic pion reactions on few-body systems within the framework of chiral effective theory. We consider two specific reactions involving pions on few-nucleon systems, namely pion production in nucleon-nucleon collisions, and incoherent pion photoproduction on the deuteron. These two reactions are closely related to the issue of dispersive and absorptive corrections to the pion-deuteron scattering length, which we also consider in our analysis. The incoherent pion photoproduction is also considered as the possible source for a high-precision determination of the neutron-neutron scattering length. (orig.)

  17. Elastic and inelastic pion reactions on few nucleon systems

    Energy Technology Data Exchange (ETDEWEB)

    Lensky, V.

    2007-09-29

    In the present work, we are studying elastic and inelastic pion reactions on few-body systems within the framework of chiral effective theory. We consider two specific reactions involving pions on few-nucleon systems, namely pion production in nucleon-nucleon collisions, and incoherent pion photoproduction on the deuteron. These two reactions are closely related to the issue of dispersive and absorptive corrections to the pion-deuteron scattering length, which we also consider in our analysis. The incoherent pion photoproduction is also considered as the possible source for a high-precision determination of the neutron-neutron scattering length. (orig.)

  18. Development of nuclear reaction data retrieval system on Meme media

    International Nuclear Information System (INIS)

    Ohbayasi, Yosihide; Masui, Hiroshi; Aoyama, Shigeyoshi; Kato, Kiyoshi; Chiba, Masaki

    2000-01-01

    A newly designed retrieval system of charged particle nuclear reaction data is developed on Meme media architecture. We designed the network-based (client-server) retrieval system. The server system is constructed on a UNIX workstation with a relational database, and the client system is constructed on Microsoft Windows PC using an IntelligentPad software package. The IntelligentPad is currently available as developing Meme media. We will develop the system to realize effective utilization of nuclear reaction data: I. 'Re-production, Re-edit, Re-use', II. 'Circulation, Coordination and Evolution', III. 'Knowledge discovery'. (author)

  19. Lens subluxation grading system: predictive value for ectopia lentis surgical outcomes

    Directory of Open Access Journals (Sweden)

    Mauro Waiswol

    2009-03-01

    Full Text Available Objective: To present a classification system to grade ectopia lentis and to assess its usefulness as a predictor for surgical outcomes. Methods: Fifty-one eyes of 28 patients with either simple (19 patients or Marfan syndrome-associated ectopia lentis (nine patients with variable degrees of subluxation were operated on. Lens subluxation intensity was graded according to the lens subluxation grading system (LSGS from grade 1 (lens on the whole pupillary area up to grade 4 (lens absent from the pupillary area. Thirty eyes underwent cataract extraction (“dry” aspiration with endocapsular ring and in-the-bag intraocular lens (IOL implantation. Twenty-one eyes underwent cataract extraction (“dry” aspiration with scleral fixation of the IOL. The predictive value of the LSGS was assessed by analyzing the post-operative outcomes, including visual acuity (VA, endothelial cell loss, and complications for each grade on the grading system. Rresults: Patients were classified into grade 1 (19.6%, grade 2 (51% and grade 3 (29.4%. Post-operative VA was lower for eyes with larger degrees of subluxation. The higher the subluxation grade, the higher the endothelial cell loss, as well as, the frequency of vitreous loss and surgical time. Higher subluxation grades prevented optimal surgical outcomes with endocapsular ring and in-the-bag IOL implantation. Cconclusions: The LSGS provides an estimate of the surgical success of ectopia lentis. Adequate standardization of lens subluxation is crucial for understanding studies dealing with the surgical correction of this disorder.

  20. Reaction-Transport Systems Mesoscopic Foundations, Fronts, and Spatial Instabilities

    CERN Document Server

    Horsthemke, Werner; Mendez, Vicenc

    2010-01-01

    This book is an introduction to the dynamics of reaction-diffusion systems, with a focus on fronts and stationary spatial patterns. Emphasis is on systems that are non-standard in the sense that either the transport is not simply classical diffusion (Brownian motion) or the system is not homogeneous. A important feature is the derivation of the basic phenomenological equations from the mesoscopic system properties. Topics addressed include transport with inertia, described by persistent random walks and hyperbolic reaction-transport equations and transport by anomalous diffusion, in particular subdiffusion, where the mean square displacement grows sublinearly with time. In particular reaction-diffusion systems are studied where the medium is in turn either spatially inhomogeneous, compositionally heterogeneous or spatially discrete. Applications span a vast range of interdisciplinary fields and the systems considered can be as different as human or animal groups migrating under external influences, population...

  1. Coupled diffusion systems with localized nonlinear reactions

    DEFF Research Database (Denmark)

    Pedersen, M.; Lin, Zhigui

    2001-01-01

    This paper deals with the blowup rate and profile near the blowup time for the system of diffusion equations uit - δui = ui+1Pi(x0, t), (i = 1,...,k, uk+1 := uu) in Ω × (0, T) with boundary conditions ui = 0 on ∂Ω × [0, T). We show that the solution has a global blowup. The exact rate...

  2. Automated egg grading system using computer vision: Investigation on weight measure versus shape parameters

    Science.gov (United States)

    Nasir, Ahmad Fakhri Ab; Suhaila Sabarudin, Siti; Majeed, Anwar P. P. Abdul; Ghani, Ahmad Shahrizan Abdul

    2018-04-01

    Chicken egg is a source of food of high demand by humans. Human operators cannot work perfectly and continuously when conducting egg grading. Instead of an egg grading system using weight measure, an automatic system for egg grading using computer vision (using egg shape parameter) can be used to improve the productivity of egg grading. However, early hypothesis has indicated that more number of egg classes will change when using egg shape parameter compared with using weight measure. This paper presents the comparison of egg classification by the two above-mentioned methods. Firstly, 120 images of chicken eggs of various grades (A–D) produced in Malaysia are captured. Then, the egg images are processed using image pre-processing techniques, such as image cropping, smoothing and segmentation. Thereafter, eight egg shape features, including area, major axis length, minor axis length, volume, diameter and perimeter, are extracted. Lastly, feature selection (information gain ratio) and feature extraction (principal component analysis) are performed using k-nearest neighbour classifier in the classification process. Two methods, namely, supervised learning (using weight measure as graded by egg supplier) and unsupervised learning (using egg shape parameters as graded by ourselves), are conducted to execute the experiment. Clustering results reveal many changes in egg classes after performing shape-based grading. On average, the best recognition results using shape-based grading label is 94.16% while using weight-based label is 44.17%. As conclusion, automated egg grading system using computer vision is better by implementing shape-based features since it uses image meanwhile the weight parameter is more suitable by using weight grading system.

  3. Relationship of the Van Herick Grading System with Peripheral Iris Configuration and Level of Iris Insertion.

    Science.gov (United States)

    Khan, Faisal Aziz; Niazi, Shafaq Pervez Khan; Khan, Assad Zaman

    2017-09-01

    To determine the relationship of the van Herick angle grading system with the level of iris insertion and peripheral iris configuration. Observational study. Eye department, Combined Military Hospital, Malir Cantt., Karachi, from May to October 2015. Sixty-five eyes of 65 patients were recruited. Anterior chamber depth at the temporal limbus was measured as a fraction of corneal section thickness using van Herick technique and graded on the standard 4-point scale of the van Herick grading system. Gonioscopy of the temporal quadrant was performed with a Posner 4 mirror goniolens and both the true level of iris insertion and peripheral iris configuration were recorded on a 4-point scale so as to equate with the van Herick 4-point grading system. Spearman's rho test was applied to determine the relationship of the van Herick grading system with level of iris root insertion and peripheral iris configuration. Amoderate positive correlation between van Herick grade and peripheral iris configuration was found which was statistically significant (rs=0.42, p < 0.001). Astatistically significant and moderate positive correlation was also detected between van Herick grade and the level of iris insertion (rs=0.45, p < 0.001). The van Herick grade has a moderately positive relationship with the peripheral iris configuration and true level of iris insertion.

  4. Power generator system for HCL reaction

    International Nuclear Information System (INIS)

    Scragg, R. L.; Parker, A. B.

    1984-01-01

    A power generation system includes a nuclear reactor having a core which in addition to generating heat generates a high frequency electromagnetic radiation. An electromagnetic radiation chamber is positioned to receive at least a portion of the radiation generated by the reactor core. Hydrogen and chlorine are connected into the electromagnetic reactor chamber and react with controlled explosive violence when exposed to the radiation from the nuclear reactor. Oxygen is fed into the reactor chamber as a control medium. The resulting gases under high pressure and temperature are utilized to drive a gas turbine generators. In an alternative embodiment the highly ionized gases, hydrogen and chlorine are utilized as a fluid medium for use in magnetohydrodynamic generators which are attached to the electromagnetic reactor chambers

  5. Prospective validation of a surgical complications grading system in a cohort of 2114 patients.

    Science.gov (United States)

    Mazeh, Haggi; Cohen, Oded; Mizrahi, Ido; Hamburger, Tamar; Stojadinovic, Alexander; Abu-Wasel, Bassam; Alaiyan, Bilal; Freund, Herbert R; Eid, Ahmed; Nissan, Aviram

    2014-05-01

    We recently reported a grading system for surgical complications. This system proved to have a high sensitivity for recording minor but meaningful complications prolonging hospital stay in patients after colorectal surgery. We aimed to prospectively validate the complication grading system in a general surgery department over 1 year. All surgical procedures and related complications were prospectively recorded between January 1st and December 31st, 2009. Surgical complications were graded on a severity scale of 1-5. The system classifies short-term outcome by grade emphasizing intensity of therapy required for treatment of the defined complication. During the study period, 2114 patients underwent surgery. Elective and oncological surgeries were performed in 1606 (76%) and 465 (22%) patients, respectively. There were 422 surgical complications in 304 (14%) patients (Grade 1/2: 203 [67%]; Grade 3/4: 90 [29%]; Grade 5: 11 [4%]). Median length of stay correlated significantly with complication severity: 2.3 d for no complication, 6.2 and 11.8 d for Grades 1/2 and 3/4, respectively (P 2 (OR 2.07, P Grade (OR 1.85, P = 0.001), oncological (OR 2.82, P 120 min (OR 2.08, P grading surgical complications permits standardized reporting of surgical morbidity according to the severity of impact. Prospective validation of this system supports its use in a general surgery setting as a tool for surgical outcome assessment and quality assurance. Copyright © 2014 Elsevier Inc. All rights reserved.

  6. Chemical Looping Combustion Reactions and Systems

    Energy Technology Data Exchange (ETDEWEB)

    Sarofim, Adel; Lighty, JoAnn; Smith, Philip; Whitty, Kevin; Eyring, Edward; Sahir, Asad; Alvarez, Milo; Hradisky, Michael; Clayton, Chris; Konya, Gabor; Baracki, Richard; Kelly, Kerry

    2011-07-01

    Chemical Looping Combustion (CLC) is one promising fuel-combustion technology, which can facilitate economic CO2 capture in coal-fired power plants. It employs the oxidation/reduction characteristics of a metal, or oxygen carrier, and its oxide, the oxidizing gas (typically air) and the fuel source may be kept separate. This work focused on two classes of oxygen carrier, one that merely undergoes a change in oxidation state, such as Fe3O4/Fe2O3 and one that is converted from its higher to its lower oxidation state by the release of oxygen on heating, i.e., CuO/Cu2O. This topical report discusses the results of four complementary efforts: (1) the development of process and economic models to optimize important design considerations, such as oxygen carrier circulation rate, temperature, residence time; (2) the development of high-performance simulation capabilities for fluidized beds and the collection, parameter identification, and preliminary verification/uncertainty quantification (3) the exploration of operating characteristics in the laboratory-scale bubbling bed reactor, with a focus on the oxygen carrier performance, including reactivity, oxygen carrying capacity, attrition resistance, resistance to deactivation, cost and availability (4) the identification of mechanisms and rates for the copper, cuprous oxide, and cupric oxide system using thermogravimetric analysis.

  7. Formal modeling of a system of chemical reactions under uncertainty.

    Science.gov (United States)

    Ghosh, Krishnendu; Schlipf, John

    2014-10-01

    We describe a novel formalism representing a system of chemical reactions, with imprecise rates of reactions and concentrations of chemicals, and describe a model reduction method, pruning, based on the chemical properties. We present two algorithms, midpoint approximation and interval approximation, for construction of efficient model abstractions with uncertainty in data. We evaluate computational feasibility by posing queries in computation tree logic (CTL) on a prototype of extracellular-signal-regulated kinase (ERK) pathway.

  8. A cerebral arteriovenous malformation grading system for gamma knife radiosurgery with the aim of early obliteration

    International Nuclear Information System (INIS)

    Negishi, Masatoshi; Inoue, Hiroshi K.; Hirato, Masafumi; Yokoe, Takao; Iino, Yuichi; Ohye, Chihiro; Shibazaki, Tohru

    1998-01-01

    Bleeding in the latency period before obliteration considerably worsens the prognosis of cerebral arteriovenous malformations (AVMs). Bleeding risk should be considered and total obliteration should performed as early as possible. In this study we investigated factors related to early obliteration following Gamma Knife radiosurgery and proposed a grading system for AVMs. Forty-six patients with cerebral AVMs followed angiographically within twelve months after Gamma Knife radiosurgery were analyzed. Four factors, volume, type (categorized by our own method), location, and marginal dose were found to be correlated with early obliteration rate. We scored these factors, and categorized the scores into a grade O to 6 Gamma Knife Score (GKS), and evaluated the obliteration rate of each grade. The total obliteration rate in twelve months according to grade was: grades 0 and 1, 61.9%; grades 2 and 3, 36.0%, grades 4 and 5, 16.7%. AVMs with a low GKS (grades 0 and 1) had a high early obliteration rate and seemed suitable for Gamma Knife radiosurgery. Since early obliteration is difficult to obtain in the high grade group, endovascular surgery should be considered to reduce the GKS before Gamma Knife radiosurgery. (author)

  9. Inertial confinement fusion reaction chamber and power conversion system study

    International Nuclear Information System (INIS)

    Maya, I.; Schultz, K.R.; Battaglia, J.M.

    1984-09-01

    GA Technologies has developed a conceptual ICF reactor system based on the Cascade rotating-bed reaction chamber concept. Unique features of the system design include the use of low activation SiC in a reaction chamber constructed of box-shaped tiles held together in compression by prestressing tendons to the vacuum chamber. Circulating Li 2 O granules serve as the tritium breeding and energy transport material, cascading down the sides of the reaction chamber to the power conversion system. The total tritium inventory of the system is 6 kg; tritium recovery is accomplished directly from the granules via the vacuum system. A system for centrifugal throw transport of the hot Li 2 O granules from the reaction chamber to the power conversion system has been developed. A number of issues were evaluated during the course of this study. These include the response of first-layer granules to the intense microexplosion surface heat flux, cost effective fabrication of Li 2 O granules, tritium inventory and recovery issues, the thermodynamics of solids-flow options, vacuum versus helium-medium heat transfer, and the tradeoffs of capital cost versus efficiency for alternate heat exchange and power conversion system option. The resultant design options appear to be economically competitive, safe, and environmentally attractive

  10. Agreement between the Facial Nerve Grading System 2.0 and the House-Brackmann Grading System in Patients with Bell Palsy.

    Science.gov (United States)

    Lee, Ho Yun; Park, Moon Suh; Byun, Jae Yong; Chung, Ji Hyun; Na, Se Young; Yeo, Seung Geun

    2013-09-01

    We have analyzed the correlation between the House-Brackmann (HB) scale and Facial Nerve Grading System 2.0 (FNGS 2.0) in patients with Bell palsy, and evaluated the usefulness of the new grading system. Sixty patients diagnosed with Bell palsy from May 2009 to December 2010 were evaluated using the HB scale and FNGS 2.0 scale during their initial visit, and after 3 and 6 weeks and 3 months. The overall intraclass correlation coefficient (ICC) was 0.908 (P=0.000) and the Spearman correlation coefficient (SCC) was 0.912 (P<0.05). ICC and SCC displayed differences over time, being 0.604 and 0.626, respectively, at first visit; 0.834 and 0.843, respectively, after 3 weeks; 0.844 and 0.848, respectively, after 6 weeks; and 0.808 and 0.793, respectively, after 3 months. There was a significant difference in full recovery, depending on the scale used (HB, P=0.000; FNGS 2.0, P<0.05). The exact agreements between regional assessment and FNGS 2.0 for the mouth, eyes, and brow were 72%, 63%, and 52%, respectively. FNGS 2.0 shows moderate agreement with HB grading. Regional assessment, rather than HB grading, yields stricter evaluation, resulting in better prognosis and determination of grade.

  11. Reaction-diffusion systems in intracellular molecular transport and control.

    Science.gov (United States)

    Soh, Siowling; Byrska, Marta; Kandere-Grzybowska, Kristiana; Grzybowski, Bartosz A

    2010-06-07

    Chemical reactions make cells work only if the participating chemicals are delivered to desired locations in a timely and precise fashion. Most research to date has focused on active-transport mechanisms, although passive diffusion is often equally rapid and energetically less costly. Capitalizing on these advantages, cells have developed sophisticated reaction-diffusion (RD) systems that control a wide range of cellular functions-from chemotaxis and cell division, through signaling cascades and oscillations, to cell motility. These apparently diverse systems share many common features and are "wired" according to "generic" motifs such as nonlinear kinetics, autocatalysis, and feedback loops. Understanding the operation of these complex (bio)chemical systems requires the analysis of pertinent transport-kinetic equations or, at least on a qualitative level, of the characteristic times of the constituent subprocesses. Therefore, in reviewing the manifestations of cellular RD, we also describe basic theory of reaction-diffusion phenomena.

  12. Parametric spatiotemporal oscillation in reaction-diffusion systems.

    Science.gov (United States)

    Ghosh, Shyamolina; Ray, Deb Shankar

    2016-03-01

    We consider a reaction-diffusion system in a homogeneous stable steady state. On perturbation by a time-dependent sinusoidal forcing of a suitable scaling parameter the system exhibits parametric spatiotemporal instability beyond a critical threshold frequency. We have formulated a general scheme to calculate the threshold condition for oscillation and the range of unstable spatial modes lying within a V-shaped region reminiscent of Arnold's tongue. Full numerical simulations show that depending on the specificity of nonlinearity of the models, the instability may result in time-periodic stationary patterns in the form of standing clusters or spatially localized breathing patterns with characteristic wavelengths. Our theoretical analysis of the parametric oscillation in reaction-diffusion system is corroborated by full numerical simulation of two well-known chemical dynamical models: chlorite-iodine-malonic acid and Briggs-Rauscher reactions.

  13. Coding the Assembly of Polyoxotungstates with a Programmable Reaction System.

    Science.gov (United States)

    Ruiz de la Oliva, Andreu; Sans, Victor; Miras, Haralampos N; Long, De-Liang; Cronin, Leroy

    2017-05-01

    Chemical transformations are normally conducted in batch or flow mode, thereby allowing the chemistry to be temporally or spatially controlled, but these approaches are not normally combined dynamically. However, the investigation of the underlying chemistry masked by the self-assembly processes that often occur in one-pot reactions and exploitation of the potential of complex chemical systems requires control in both time and space. Additionally, maintaining the intermediate constituents of a self-assembled system "off equilibrium" and utilizing them dynamically at specific time intervals provide access to building blocks that cannot coexist under one-pot conditions and ultimately to the formation of new clusters. Herein, we implement the concept of a programmable networked reaction system, allowing us to connect discrete "one-pot" reactions that produce the building block{W 11 O 38 } ≡ {W 11 } under different conditions and control, in real time, the assembly of a series of polyoxometalate clusters {W 12 O 42 } ≡ {W 12 }, {W 22 O 74 } ≡ {W 22 } 1a, {W 34 O 116 } ≡ {W 34 } 2a, and {W 36 O 120 } ≡ {W 36 } 3a, using pH and ultraviolet-visible monitoring. The programmable networked reaction system reveals that is possible to assemble a range of different clusters using {W 11 }-based building blocks, demonstrating the relationship between the clusters within the family of iso-polyoxotungstates, with the final structural motif being entirely dependent on the building block libraries generated in each separate reaction space within the network. In total, this approach led to the isolation of five distinct inorganic clusters using a "fixed" set of reagents and using a fully automated sequence code, rather than five entirely different reaction protocols. As such, this approach allows us to discover, record, and implement complex one-pot reaction syntheses in a more general way, increasing the yield and reproducibility and potentially giving access to

  14. Effect of cationic molecules on the oxygen reduction reaction on fuel cell grade Pt/C (20 wt%) catalyst in potassium hydroxide (aq, 1 mol dm(-3)).

    Science.gov (United States)

    Ong, Ai Lien; Inglis, Kenneth K; Whelligan, Daniel K; Murphy, Sam; Varcoe, John R

    2015-05-14

    This study investigates the effect of 1 mmol dm(-3) concentrations of a selection of small cationic molecules on the performance of a fuel cell grade oxygen reduction reaction (ORR) catalyst (Johnson Matthey HiSPEC 3000, 20 mass% Pt/C) in aqueous KOH (1 mol dm(-3)). The cationic molecules studied include quaternary ammonium (including those based on bicyclic systems) and imidazolium types as well as a phosphonium example: these serve as fully solubilised models for the commonly encountered head-groups in alkaline anion-exchange membranes (AAEM) and anion-exchange ionomers (AEI) that are being developed for application in alkaline polymer electrolyte fuel cells (APEFCs), batteries and electrolysers. Both cyclic and hydrodynamic linear sweep rotating disk electrode voltammetry techniques were used. The resulting voltammograms and subsequently derived data (e.g. apparent electrochemical active surface areas, Tafel plots, and number of [reduction] electrons transferred per O2) were compared. The results show that the imidazolium examples produced the highest level of interference towards the ORR on the Pt/C catalyst under the experimental conditions used.

  15. Point source identification in nonlinear advection–diffusion–reaction systems

    International Nuclear Information System (INIS)

    Mamonov, A V; Tsai, Y-H R

    2013-01-01

    We consider a problem of identification of point sources in time-dependent advection–diffusion systems with a nonlinear reaction term. The linear counterpart of the problem in question can be reduced to solving a system of nonlinear algebraic equations via the use of adjoint equations. We extend this approach by constructing an algorithm that solves the problem iteratively to account for the nonlinearity of the reaction term. We study the question of improving the quality of source identification by adding more measurements adaptively using the solution obtained previously with a smaller number of measurements. (paper)

  16. Illustration of reaction mechanism in polyatomic systems via computer movies

    International Nuclear Information System (INIS)

    Raff, L.M.

    1974-01-01

    The CD 4 + T* systems is suited for classroom illustration of reaction dynamics. Questions about the system can be illustrated by reducing selected many-body trajectories to a 16 mm color movie that represents the six-body motion in projected coordinates. Such a movie has been produced for this system. The production procedure used is reported, and a detailed description of the contents of the movie is given. (U.S.)

  17. Technical Meeting on Grading of the Application of Management System Requirements. Presentations

    International Nuclear Information System (INIS)

    2012-01-01

    The objectives of this Technical Meeting are threefold: - to share international experiences and lessons learned, as well as exchange views on best practices and strategies to overcome the difficulties encountered; - to review and discuss the draft technical report on 'Grading the Application of Management System Requirements, to allow the participants to contribute to the improvement of the document and to enrich it with practical examples; and - to strengthen the international networking of specialists in the field. The topics covered during the meeting will include: - Examples and case studies presented by participants from countries with nuclear facilities (mainly focused on NPPs, and, where appropriate, from research reactors, fuel cycle and waste management facilities) on grading the application of management system requirements and lessons learned. - Reviewing and improving the final draft of a technical report on 'Grading the Application of Management System Requirements', which will supersede the previous guidance: Grading of Quality Assurance Requirement: A Manual (Technical Reports Series No. 328)

  18. Developing seventh grade students' systems thinking skills in the context of the human circulatory system.

    Science.gov (United States)

    Raved, Lena; Yarden, Anat

    2014-01-01

    Developing systems thinking skills in school can provide useful tools to deal with a vast amount of medical and health information that may help learners in decision making in their future lives as citizen. Thus, there is a need to develop effective tools that will allow learners to analyze biological systems and organize their knowledge. Here, we examine junior high school students' systems thinking skills in the context of the human circulatory system. A model was formulated for developing teaching and learning materials and for characterizing students' systems thinking skills. Specifically, we asked whether seventh grade students, who studied about the human circulatory system, acquired systems thinking skills, and what are the characteristics of those skills? Concept maps were used to characterize students' systems thinking components and examine possible changes in the students' knowledge structure. These maps were composed by the students before and following the learning process. The study findings indicate a significant improvement in the students' ability to recognize the system components and the processes that occur within the system, as well as the relationships between different levels of organization of the system, following the learning process. Thus, following learning students were able to organize the systems' components and its processes within a framework of relationships, namely the students' systems thinking skills were improved in the course of learning using the teaching and learning materials.

  19. Citric acid-modified Fenton's reaction for the oxidation of chlorinated ethylenes in soil solution systems.

    Science.gov (United States)

    Seol, Yongkoo; Javandel, Iraj

    2008-06-01

    Fenton's reagent, a solution of hydrogen peroxide and ferrous iron catalyst, is used for an in situ chemical oxidation of organic contaminants. Sulfuric acid is commonly used to create an acidic condition needed for catalytic oxidation. Fenton's reaction often involves pressure buildup and precipitation of reaction products, which can cause safety hazards and diminish efficiency. We selected citric acid, a food-grade substance, as an acidifying agent to evaluate its efficiencies for organic contaminant removal in Fenton's reaction, and examined the impacts of using citric acid on the unwanted reaction products. A series of batch and column experiments were performed with varying H2O2 concentrations to decompose selected chlorinated ethylenes. Either dissolved iron from soil or iron sulfate salt was added to provide the iron catalyst in the batch tests. Batch experiments revealed that both citric and sulfuric acid systems achieved over 90% contaminant removal rates, and the presence of iron catalyst was essential for effective decontamination. Batch tests with citric acid showed no signs of pressure accumulation and solid precipitations, however the results suggested that an excessive usage of H2O2 relative to iron catalysts (Fe2+/H2O2<1/330) would result in lowering the efficiency of contaminant removal by iron chelation in the citric acid system. Column tests confirmed that citric acid could provide suitable acidic conditions to achieve higher than 55% contaminant removal rates.

  20. Reaction behavior between B{sub 4}C, 304 grade of stainless steel and Zircaloy at 1473 K

    Energy Technology Data Exchange (ETDEWEB)

    Sasaki, Ryosuke [Institute of Multidisciplinary Research Advanced Material, Tohoku University, 1-1 Katahira 2, Aoba-ku, Sendai (Japan); Ueda, Shigeru, E-mail: tie@tagen.tohokku.ac.jp [Institute of Multidisciplinary Research Advanced Material, Tohoku University, 1-1 Katahira 2, Aoba-ku, Sendai (Japan); Kim, Sun-Joong [Dept. of Materials Science and Engineering, Chosun University, 309, Pilmun-daero, Dong-gu, Gwangju (Korea, Republic of); Gao, Xu; Kitamura, Shin-ya [Institute of Multidisciplinary Research Advanced Material, Tohoku University, 1-1 Katahira 2, Aoba-ku, Sendai (Japan)

    2016-08-15

    For a better understanding of the decommissioning of the Fukushima-daiichi nuclear power plant, the melting behavior of the control blade and the channel box should be clarified. In Fukushima nuclear reactor, the channel box was made of Zircaloy-4, and the control rode is made of B{sub 4}C together with stainless steel cladding and sheath. In the study, the interaction among B{sub 4}C, stainless steel (SUS), and Zircaloy-4 was investigated at 1473 K in either argon or air atmosphere. In argon, Zircaloy is melted by the diffusion of elements from SUS, and SUS was melted at 1473 K by the diffusion of C and B. In air, SUS reacted with B{sub 2}O{sub 3} and formed an oxides melt firstly. Then, the oxidized Zircaloy contacted with this melt and fused. Moreover, the progress of core melting process during severe accident under different atmospheres was firstly discussed. - Highlights: • The interaction among the system of B{sub 4}C, grade 304 stainless steel and Zircaloy-4 were studied at 1473 K in Ar and air. • In argon, Zircaloy is melted by the diffusion of elements from SUS, and SUS was melted by the diffusion of C and B. • In air, SUS reacted with B{sub 2}O{sub 3} and formed an oxides melt. Then, the oxidized Zircaloy contacted with this melt and fused.

  1. Front propagation in Rayleigh-Taylor systems with reaction

    International Nuclear Information System (INIS)

    Scagliarini, A; Biferale, L; Sbragaglia, M; Mantovani, F; Pivanti, M; Schifano, S F; Tripiccione, R; Pozzati, F; Toschi, F

    2011-01-01

    A special feature of Rayleigh-Taylor systems with chemical reactions is the competition between turbulent mixing and the 'burning processes', which leads to a highly non-trivial dynamics. We studied the problem performing high resolution numerical simulations of a 2d system, using a thermal lattice Boltzmann (LB) model. We spanned the various regimes emerging at changing the relative chemical/turbulent time scales, from slow to fast reaction; in the former case we found numerical evidence of an enhancement of the front propagation speed (with respect to the laminar case), providing a phenomenological argument to explain the observed behaviour. When the reaction is very fast, instead, the formation of sharp fronts separating patches of pure phases, leads to an increase of intermittency in the small scale statistics of the temperature field.

  2. Developing Seventh Grade Students’ Systems Thinking Skills in the Context of the Human Circulatory System

    Science.gov (United States)

    Raved, Lena; Yarden, Anat

    2014-01-01

    Developing systems thinking skills in school can provide useful tools to deal with a vast amount of medical and health information that may help learners in decision making in their future lives as citizen. Thus, there is a need to develop effective tools that will allow learners to analyze biological systems and organize their knowledge. Here, we examine junior high school students’ systems thinking skills in the context of the human circulatory system. A model was formulated for developing teaching and learning materials and for characterizing students’ systems thinking skills. Specifically, we asked whether seventh grade students, who studied about the human circulatory system, acquired systems thinking skills, and what are the characteristics of those skills? Concept maps were used to characterize students’ systems thinking components and examine possible changes in the students’ knowledge structure. These maps were composed by the students before and following the learning process. The study findings indicate a significant improvement in the students’ ability to recognize the system components and the processes that occur within the system, as well as the relationships between different levels of organization of the system, following the learning process. Thus, following learning students were able to organize the systems’ components and its processes within a framework of relationships, namely the students’ systems thinking skills were improved in the course of learning using the teaching and learning materials. PMID:25520948

  3. Visual MRI grading system to evaluate atrophy of the supeaspinatus muscle

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Hyun Kyoung; Hong, Sung Hwan; Yoo, Hye Jin; Choi, Ja Young; Kim, Sae Hoon; Choi, Jung Ah; Kang, Heung Sik [Seoul National University College of Medicine, Seoul (Korea, Republic of)

    2014-08-15

    To investigate the interobserver reproducibility and diagnostic feasibility of a visual grading system for assessing atrophy of the supraspinatus muscle on magnetic resonance imaging (MRI). Three independent radiologists retrospectively evaluated the occupying ratio of the supraspinatus muscle in the supraspinatus fossa on 192 shoulder MRI examinations in 188 patients using a 3-point visual grading system (1, ≥ 60%; 2, 30-59%; 3, < 30%) on oblique sagittal T1-weighted images. The inter-reader agreement and the agreement with the reference standard (3-point grades according to absolute occupying ratio values quantitatively measured by directly contouring the muscles on MRI) were analyzed using weighted kappa. The visual grading was applied by a single reader to a group of 100 consecutive patients who had undergone rotator cuff repair to retrospectively determine the association between the visual grades at preoperative state and postsurgical occurrences of retear. The inter-reader weighted kappa value for the visual grading was 0.74 when averaged across three reader pairs (0.70-0.77 for individual reader pairs). The weighted kappa value between the visual grading and the reference standard ranged from 0.75 to 0.83. There was a significant difference in retear rates of the rotator cuff between the 3 visual grades of supraspinatus muscle atrophy on MRI in univariable analysis (p < 0.001), but not in multivariable analysis (p = 0.026). The 3-point visual grading system may be a feasible method to assess the severity of supraspinatus muscle atrophy on MRI and assist in the clinical management of patients with rotator cuff tear.

  4. Visual MRI grading system to evaluate atrophy of the supeaspinatus muscle

    International Nuclear Information System (INIS)

    Lim, Hyun Kyoung; Hong, Sung Hwan; Yoo, Hye Jin; Choi, Ja Young; Kim, Sae Hoon; Choi, Jung Ah; Kang, Heung Sik

    2014-01-01

    To investigate the interobserver reproducibility and diagnostic feasibility of a visual grading system for assessing atrophy of the supraspinatus muscle on magnetic resonance imaging (MRI). Three independent radiologists retrospectively evaluated the occupying ratio of the supraspinatus muscle in the supraspinatus fossa on 192 shoulder MRI examinations in 188 patients using a 3-point visual grading system (1, ≥ 60%; 2, 30-59%; 3, < 30%) on oblique sagittal T1-weighted images. The inter-reader agreement and the agreement with the reference standard (3-point grades according to absolute occupying ratio values quantitatively measured by directly contouring the muscles on MRI) were analyzed using weighted kappa. The visual grading was applied by a single reader to a group of 100 consecutive patients who had undergone rotator cuff repair to retrospectively determine the association between the visual grades at preoperative state and postsurgical occurrences of retear. The inter-reader weighted kappa value for the visual grading was 0.74 when averaged across three reader pairs (0.70-0.77 for individual reader pairs). The weighted kappa value between the visual grading and the reference standard ranged from 0.75 to 0.83. There was a significant difference in retear rates of the rotator cuff between the 3 visual grades of supraspinatus muscle atrophy on MRI in univariable analysis (p < 0.001), but not in multivariable analysis (p = 0.026). The 3-point visual grading system may be a feasible method to assess the severity of supraspinatus muscle atrophy on MRI and assist in the clinical management of patients with rotator cuff tear.

  5. Thermo effect of chemical reaction in irreversible electrochemical systems

    International Nuclear Information System (INIS)

    Tran Vinh Quy; Nguyen Tang

    1989-01-01

    From first law of thermodynamics the expressions of statistical calculation of 'Fundamental' and 'Thermo-chemical' thermal effects are obtained. Besides, method of calculation of thermal effect of chemical reactions in non-equilibrium electro-chemical systems is accurately discussed. (author). 7 refs

  6. Synthesis of hexagonal gold nanoparticles using a microfluidic reaction system

    International Nuclear Information System (INIS)

    Weng, Chen-Hsun; Lee, Gwo-Bin; Huang, Chih-Chia; Yeh, Chen-Sheng; Lei, Huan-Yao

    2008-01-01

    A new microfluidic reaction system capable of mixing, transporting and reacting is developed for the synthesis of gold nanoparticles. It allows for a rapid and a cost-effective approach to accelerate the synthesis of gold nanoparticles. The microfluidic reaction chip is made from micro-electro-mechanical-system technologies which integrate a micro-mixer, micro-pumps, a micro-valve, micro-heaters and a micro temperature sensor on a single chip. Successful synthesis of dispersed gold nanoparticles has been demonstrated within a shorter period of time, as compared to traditional methods. It is experimentally found that precise control of the mixing/heating time for gold salts and reducing agents plays an essential role in the synthesis of gold nanoparticles. The growth process of hexagonal gold nanoparticles by a thermal aqueous approach is also systematically studied by using the same microfluidic reaction system. The development of the microfluidic reaction system could be promising for the synthesis of functional nanoparticles for future biomedical applications

  7. Conservation-dissipation structure of chemical reaction systems.

    Science.gov (United States)

    Yong, Wen-An

    2012-12-01

    In this Brief Report, we show that balanced chemical reaction systems governed by the law of mass action have an elegant conservation-dissipation structure. From this structure a number of important conclusions can be easily deduced. In particular, with the help of this structure we can rigorously justify the classical partial equilibrium approximation in chemical kinetics.

  8. Turing instability in reaction-diffusion systems with nonlinear diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Zemskov, E. P., E-mail: zemskov@ccas.ru [Russian Academy of Sciences, Dorodnicyn Computing Center (Russian Federation)

    2013-10-15

    The Turing instability is studied in two-component reaction-diffusion systems with nonlinear diffusion terms, and the regions in parametric space where Turing patterns can form are determined. The boundaries between super- and subcritical bifurcations are found. Calculations are performed for one-dimensional brusselator and oregonator models.

  9. Reaction

    African Journals Online (AJOL)

    abp

    19 oct. 2017 ... Reaction to Mohamed Said Nakhli et al. concerning the article: "When the axillary block remains the only alternative in a 5 year old child". .... Bertini L1, Savoia G, De Nicola A, Ivani G, Gravino E, Albani A et al ... 2010;7(2):101-.

  10. Genetic-neuro-fuzzy system for grading depression

    Directory of Open Access Journals (Sweden)

    Kumar Ashish

    2018-01-01

    Full Text Available Main aim of this study is to develop a software prototype tool for grading and diagnosing depression that will help general physicians for first hand applications. Identification of key symptoms responsible for depression is also another important issue considered in this study. It involves collection of data taken from patients through doctors. Due to several reasons, collection of data in Indian scenario is extremely difficult and thus this tool will be very handy and useful for general physicians working at remote locations. Also, it is possible to collect a data pool through this software model. An intelligent Neuro-Fuzzy model is developed for this purpose. Performance of the said model has been optimized through two approaches. In Approach 1, where a back-propagation algorithm has been considered and in Approach 2, Genetic Algorithm has been used. The model is trained with 78 data and validated with 10 data. Approach 2 superseded Approach 1 in terms of diagnostic accuracy. Therefore, it can be said that the soft computing-based diagnostic models could assist the doctors to make informed decisions. Data for training and validation for this purpose has been collected during 2004–2005 from a Government mental hospital in India.

  11. Thermodynamically consistent Bayesian analysis of closed biochemical reaction systems

    Directory of Open Access Journals (Sweden)

    Goutsias John

    2010-11-01

    Full Text Available Abstract Background Estimating the rate constants of a biochemical reaction system with known stoichiometry from noisy time series measurements of molecular concentrations is an important step for building predictive models of cellular function. Inference techniques currently available in the literature may produce rate constant values that defy necessary constraints imposed by the fundamental laws of thermodynamics. As a result, these techniques may lead to biochemical reaction systems whose concentration dynamics could not possibly occur in nature. Therefore, development of a thermodynamically consistent approach for estimating the rate constants of a biochemical reaction system is highly desirable. Results We introduce a Bayesian analysis approach for computing thermodynamically consistent estimates of the rate constants of a closed biochemical reaction system with known stoichiometry given experimental data. Our method employs an appropriately designed prior probability density function that effectively integrates fundamental biophysical and thermodynamic knowledge into the inference problem. Moreover, it takes into account experimental strategies for collecting informative observations of molecular concentrations through perturbations. The proposed method employs a maximization-expectation-maximization algorithm that provides thermodynamically feasible estimates of the rate constant values and computes appropriate measures of estimation accuracy. We demonstrate various aspects of the proposed method on synthetic data obtained by simulating a subset of a well-known model of the EGF/ERK signaling pathway, and examine its robustness under conditions that violate key assumptions. Software, coded in MATLAB®, which implements all Bayesian analysis techniques discussed in this paper, is available free of charge at http://www.cis.jhu.edu/~goutsias/CSS%20lab/software.html. Conclusions Our approach provides an attractive statistical methodology for

  12. Stochastic thermodynamics and entropy production of chemical reaction systems

    Science.gov (United States)

    Tomé, Tânia; de Oliveira, Mário J.

    2018-06-01

    We investigate the nonequilibrium stationary states of systems consisting of chemical reactions among molecules of several chemical species. To this end, we introduce and develop a stochastic formulation of nonequilibrium thermodynamics of chemical reaction systems based on a master equation defined on the space of microscopic chemical states and on appropriate definitions of entropy and entropy production. The system is in contact with a heat reservoir and is placed out of equilibrium by the contact with particle reservoirs. In our approach, the fluxes of various types, such as the heat and particle fluxes, play a fundamental role in characterizing the nonequilibrium chemical state. We show that the rate of entropy production in the stationary nonequilibrium state is a bilinear form in the affinities and the fluxes of reaction, which are expressed in terms of rate constants and transition rates, respectively. We also show how the description in terms of microscopic states can be reduced to a description in terms of the numbers of particles of each species, from which follows the chemical master equation. As an example, we calculate the rate of entropy production of the first and second Schlögl reaction models.

  13. Computer aided analysis of prostate histopathology images to support a refined Gleason grading system

    Science.gov (United States)

    Ren, Jian; Sadimin, Evita; Foran, David J.; Qi, Xin

    2017-02-01

    The Gleason grading system used to render prostate cancer diagnosis has recently been updated to allow more accurate grade stratification and higher prognostic discrimination when compared to the traditional grading system. In spite of progress made in trying to standardize the grading process, there still remains approximately a 30% grading discrepancy between the score rendered by general pathologists and those provided by experts while reviewing needle biopsies for Gleason pattern 3 and 4, which accounts for more than 70% of daily prostate tis- sue slides at most institutions. We propose a new computational imaging method for Gleason pattern 3 and 4 classification, which better matches the newly established prostate cancer grading system. The computer- aided analysis method includes two phases. First, the boundary of each glandular region is automatically segmented using a deep convolutional neural network. Second, color, shape and texture features are extracted from superpixels corresponding to the outer and inner glandular regions and are subsequently forwarded to a random forest classifier to give a gradient score between 3 and 4 for each delineated glandular region. The F1 score for glandular segmentation is 0.8460 and the classification accuracy is 0.83+/-0.03.

  14. Development and Assessment of Memorial Sloan Kettering Cancer Center’s Surgical Secondary Events Grading System

    Science.gov (United States)

    Strong, Vivian E.; Selby, Luke V.; Sovel, Mindy; Disa, Joseph J.; Hoskins, William; DeMatteo, Ronald; Scardino, Peter; Jaques, David P.

    2015-01-01

    Background Studying surgical secondary events is an evolving effort with no current established system for database design, standard reporting, or definitions. Using the Clavien-Dindo classification as a guide, in 2001 we developed a Surgical Secondary Events database based on grade of event and required intervention to begin prospectively recording and analyzing all surgical secondary events (SSE). Study Design Events are prospectively entered into the database by attending surgeons, house staff, and research staff. In 2008 we performed a blinded external audit of 1,498 operations that were randomly selected to examine the quality and reliability of the data. Results 1,498 of 4,284 operations during the 3rd quarter of 2008 were audited. 79% (N=1,180) of the operations did not have a secondary event while 21% (N=318) of operations had an identified event. 91% (1,365) of operations were correctly entered into the SSE database. 97% (129/133) of missed secondary events were Grades I and II. Three Grade III (2%) and one Grade IV (1%) secondary event were missed. There were no missed Grade 5 secondary events. Conclusion Grade III – IV events are more accurately collected than Grade I – II events. Robust and accurate secondary events data can be collected by clinicians and research staff and these data can safely be used for quality improvement projects and research. PMID:25319579

  15. A proposed angioarchitecture grading system related to embolization of brain arteriovenous malformations

    International Nuclear Information System (INIS)

    Fang Bing; Wang Yirong; Li Tielin; Duan Chuanzhi

    2007-01-01

    Objective: To analyze the risk of embolization of brain AVMs, study the angioarchitectural factors affecting the difference of embolization level, and to establish the angioarchitecture grading system for embolization of brain AVMs. Methods: The clinical data, angioarchitectural features, embolism complication and embolism level were retrospectively analyzed. Multivariate statistical analysis was performed to determine if any of the variables was predictive of a poor outcome of embolization (death or permanent neurological deficit), and if any of the variables was predictive of the percentage obliteration achieved by embolization. Based on the above results, we established the angioarchitecture grading system. Results: Endovascular procedures for embolization were performed 324 times in 189 patients during an 11-year period. Embolization was performed using N-butyl cyanoacrylate. In those patients, 3 (1.6%) died and 5(2.6%) had a permanent neurological deficit as a result of the embolization. The AVMs were given a score from 0 to 5 based on the size, number of the first grade feeding artery, and number of the second grade feeding artery. The assigned scores were as follows: nidus size (AVF=0, <30 mm=1, ≥30 mm=2), number of the first grade feeding artery (1=0, 2-3=1, ≥4=2)and number of the second grade feeding artery(≤3=0, ≥4=1). Angiographic results based on percentage obliteration were grouped into four categories: complete, 80%-99%, 50%-79%, and 0%-50%. In the AVMs with angioarchitecture scores 0-1, 24(77.4% )of 31 were fully embolised, with scores of 4-5, none of the 101 were fully embolised, 82(81.2%)were below 50% embolization percentage. The correlation between the angioarchitecture grading system and the embolization percentage was strong (κ= 0.736, P<0.05). Conclusions: The angioarchitecture grading system predicts the embolization percentage perfectly. The lower the scores, the higher the possibility of fully embolization is; the higher the scores

  16. Decay to Equilibrium for Energy-Reaction-Diffusion Systems

    KAUST Repository

    Haskovec, Jan

    2018-02-06

    We derive thermodynamically consistent models of reaction-diffusion equations coupled to a heat equation. While the total energy is conserved, the total entropy serves as a driving functional such that the full coupled system is a gradient flow. The novelty of the approach is the Onsager structure, which is the dual form of a gradient system, and the formulation in terms of the densities and the internal energy. In these variables it is possible to assume that the entropy density is strictly concave such that there is a unique maximizer (thermodynamical equilibrium) given linear constraints on the total energy and suitable density constraints. We consider two particular systems of this type, namely, a diffusion-reaction bipolar energy transport system, and a drift-diffusion-reaction energy transport system with confining potential. We prove corresponding entropy-entropy production inequalities with explicitly calculable constants and establish the convergence to thermodynamical equilibrium, first in entropy and later in L norm using Cziszár–Kullback–Pinsker type inequalities.

  17. Decay to Equilibrium for Energy-Reaction-Diffusion Systems

    KAUST Repository

    Haskovec, Jan; Hittmeir, Sabine; Markowich, Peter A.; Mielke, Alexander

    2018-01-01

    We derive thermodynamically consistent models of reaction-diffusion equations coupled to a heat equation. While the total energy is conserved, the total entropy serves as a driving functional such that the full coupled system is a gradient flow. The novelty of the approach is the Onsager structure, which is the dual form of a gradient system, and the formulation in terms of the densities and the internal energy. In these variables it is possible to assume that the entropy density is strictly concave such that there is a unique maximizer (thermodynamical equilibrium) given linear constraints on the total energy and suitable density constraints. We consider two particular systems of this type, namely, a diffusion-reaction bipolar energy transport system, and a drift-diffusion-reaction energy transport system with confining potential. We prove corresponding entropy-entropy production inequalities with explicitly calculable constants and establish the convergence to thermodynamical equilibrium, first in entropy and later in L norm using Cziszár–Kullback–Pinsker type inequalities.

  18. Expression of monellin in a food-grade delivery system in Saccharomyces cerevisiae.

    Science.gov (United States)

    Liu, Jun; Yan, Da-zhong; Zhao, Sheng-jun

    2015-10-01

    Genetically modified (GM) foods have caused much controversy. Construction of a food-grade delivery system is a desirable technique with presumptive impact on industrial applications from the perspective of bio-safety. The aim of this study was to construct a food-grade delivery system for Saccharomyces cerevisiae and to study the expression of monellin from the berries of the West African forest plant Dioscoreophyllum cumminsii in this system. A food-grade system for S. cerevisiae was constructed based on ribosomal DNA (rDNA)-mediated homologous recombination to enable high-copy-number integration of the expression cassette inserted into the rDNA locus. A copper resistance gene (CUP1) was used as the selection marker for yeast transformation. Because variants of transformants containing different copy numbers at the CUP1 locus can be readily selected after growth in the presence of elevated copper levels, we suggest that this system would prove useful in the generation of tandemly iterated gene clusters. Using this food-grade system, a single-chain monellin gene was heterologously expressed. The yield of monellin reached a maximum of 675 mg L(-1) . This system harbors exclusively S. cerevisiae DNA with no antibiotic resistance genes, and it should therefore be appropriate for safe use in the food industry. Monellin was shown to be expressed in this food-grade delivery system. To our knowledge, this is the first report so far on expression of monellin in a food-grade expression system in S. cerevisiae. © 2014 Society of Chemical Industry.

  19. Saponification reaction system: a detailed mass transfer coefficient determination.

    Science.gov (United States)

    Pečar, Darja; Goršek, Andreja

    2015-01-01

    The saponification of an aromatic ester with an aqueous sodium hydroxide was studied within a heterogeneous reaction medium in order to determine the overall kinetics of the selected system. The extended thermo-kinetic model was developed compared to the previously used simple one. The reaction rate within a heterogeneous liquid-liquid system incorporates a chemical kinetics term as well as mass transfer between both phases. Chemical rate constant was obtained from experiments within a homogeneous medium, whilst the mass-transfer coefficient was determined separately. The measured thermal profiles were then the bases for determining the overall reaction-rate. This study presents the development of an extended kinetic model for considering mass transfer regarding the saponification of ethyl benzoate with sodium hydroxide within a heterogeneous reaction medium. The time-dependences are presented for the mass transfer coefficient and the interfacial areas at different heterogeneous stages and temperatures. The results indicated an important role of reliable kinetic model, as significant difference in k(L)a product was obtained with extended and simple approach.

  20. Radiative transfer equation for graded index medium in cylindrical and spherical coordinate systems

    International Nuclear Information System (INIS)

    Liu, L.H.; Zhang, L.; Tan, H.P.

    2006-01-01

    In graded index medium, the ray goes along a curved path determined by Fermat principle, and the curved ray-tracing is very difficult and complex. To avoid the complicated and time-consuming computation of curved ray trajectory, the methods not based on ray-tracing technique need to be developed for the solution of radiative transfer in graded index medium. For this purpose, in this paper the streaming operator along a curved ray trajectory in original radiative transfer equation for graded index medium is transformed and expressed in spatial and angular ordinates and the radiative transfer equation for graded index medium in cylindrical and spherical coordinate systems are derived. The conservative and the non-conservative forms of radiative transfer equation for three-dimensional graded index medium are given, which can be used as base equations to develop the numerical simulation methods, such as finite volume method, discrete ordinates method, and finite element method, for radiative transfer in graded index medium in cylindrical and spherical coordinate systems

  1. A practical MRI grading system for osteoarthritis of the knee: Association with Kellgren–Lawrence radiographic scores

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hee-Jin, E-mail: parkhiji@gmail.com [Department of Radiology, Sungkyunkwan University School of Medicine, Kangbuk Samsung Hospital, #108 Pyung-dong, Jongno-gu, Seoul 110-746 (Korea, Republic of); Department of Radiology, Kangwon National University School of Medicine, Baengnyeong-ro 156, Chuncheon-Si, Gangwon-Do Kangwon National University Hospital 200-722 (Korea, Republic of); Kim, Sam Soo, E-mail: samskim@kangwon.ac.kr [Department of Radiology, Kangwon National University School of Medicine, Baengnyeong-ro 156, Chuncheon-Si, Gangwon-Do Kangwon National University Hospital 200-722 (Korea, Republic of); Lee, So-Yeon, E-mail: parkhiji@kwandong.ac.kr [Department of Radiology, Sungkyunkwan University School of Medicine, Kangbuk Samsung Hospital, #108 Pyung-dong, Jongno-gu, Seoul 110-746 (Korea, Republic of); Park, Noh-Hyuck, E-mail: nhpark904@kwandong.ac.kr [Department of Radiology, Myongji Hospital, Kwandong University, College of Medicine, 697-24 Hwajung-dong, Dukyang-ku, Koyang, Kyunggi 412-270 (Korea, Republic of); Park, Ji-Yeon, E-mail: zzzz3@hanmail.net [Department of Radiology, Myongji Hospital, Kwandong University, College of Medicine, 697-24 Hwajung-dong, Dukyang-ku, Koyang, Kyunggi 412-270 (Korea, Republic of); Choi, Yoon-Jung, E-mail: yoonchoi99@gmail.com [Department of Radiology, Sungkyunkwan University School of Medicine, Kangbuk Samsung Hospital, #108 Pyung-dong, Jongno-gu, Seoul 110-746 (Korea, Republic of); Jeon, Hyun-Jun, E-mail: ostrich-13@hanmail.net [Department of Occupational Medicine, Dongsan Medical Center, Keimyung University School of Medicine, 194 Dongsan-Dong, Jung-ku, Taegu (Korea, Republic of)

    2013-01-15

    Purpose: To propose a reproducible and constant MR grading system for osteoarthritis of the knee joint that provides high interobserver and intraoberver agreement and that does not require complicated calculation procedures. Materials and methods: This retrospective study sample included 44 men and 65 women who underwent both MRI and plain radiography of the knee at our institution. All patients were older than 50 years of age (mean 57.7) and had clinically suspected osteoarthritis of the knee. The standard of 4 grades on the MR grade scale was based mainly on cartilage injury and additional findings. Kellgren–Lawrence grades were assessed for the same patient group. The relationship between the results was determined. Statistical analyses were performed including kappa statistics, categorical regression analysis and nonparametric correlation analysis. Results: The interobserver and intraoberver agreements between the two readers in the grading of osteoarthritis were found to be almost perfect. Interobserver and intraobserver agreements were slightly lower for the MR grading system than for the Kellgren–Lawrence grading scale. The correlation between the MR grade and Kellgren–Lawrence grade was very high and did not differ with patient age. The MR grades were highly correlated with the Kellgren–Lawrence grades and showed excellent interobserver and intraobserver agreements. Conclusion: This new MR grading system for osteoarthritis of the knee joint is reproducible and may be helpful for the grading of osteoarthritis of the knee without requiring reference to plain radiography.

  2. A practical MRI grading system for osteoarthritis of the knee: Association with Kellgren–Lawrence radiographic scores

    International Nuclear Information System (INIS)

    Park, Hee-Jin; Kim, Sam Soo; Lee, So-Yeon; Park, Noh-Hyuck; Park, Ji-Yeon; Choi, Yoon-Jung; Jeon, Hyun-Jun

    2013-01-01

    Purpose: To propose a reproducible and constant MR grading system for osteoarthritis of the knee joint that provides high interobserver and intraoberver agreement and that does not require complicated calculation procedures. Materials and methods: This retrospective study sample included 44 men and 65 women who underwent both MRI and plain radiography of the knee at our institution. All patients were older than 50 years of age (mean 57.7) and had clinically suspected osteoarthritis of the knee. The standard of 4 grades on the MR grade scale was based mainly on cartilage injury and additional findings. Kellgren–Lawrence grades were assessed for the same patient group. The relationship between the results was determined. Statistical analyses were performed including kappa statistics, categorical regression analysis and nonparametric correlation analysis. Results: The interobserver and intraoberver agreements between the two readers in the grading of osteoarthritis were found to be almost perfect. Interobserver and intraobserver agreements were slightly lower for the MR grading system than for the Kellgren–Lawrence grading scale. The correlation between the MR grade and Kellgren–Lawrence grade was very high and did not differ with patient age. The MR grades were highly correlated with the Kellgren–Lawrence grades and showed excellent interobserver and intraobserver agreements. Conclusion: This new MR grading system for osteoarthritis of the knee joint is reproducible and may be helpful for the grading of osteoarthritis of the knee without requiring reference to plain radiography

  3. A Weak Comparison Principle for Reaction-Diffusion Systems

    Directory of Open Access Journals (Sweden)

    José Valero

    2012-01-01

    Full Text Available We prove a weak comparison principle for a reaction-diffusion system without uniqueness of solutions. We apply the abstract results to the Lotka-Volterra system with diffusion, a generalized logistic equation, and to a model of fractional-order chemical autocatalysis with decay. Moreover, in the case of the Lotka-Volterra system a weak maximum principle is given, and a suitable estimate in the space of essentially bounded functions L∞ is proved for at least one solution of the problem.

  4. Investigation of (n,γ) reactions in fissionable fluids in a hybrid reactor system

    Energy Technology Data Exchange (ETDEWEB)

    Guenay, Mehtap [Inoenue Univ., Malatya (Turkey). Physics Dept.

    2014-06-15

    In this study, the effect of (n,γ) reactions in spent fuel-grade (SFG)-PuO{sub 2}, UO{sub 2}, NpO{sub 2} and UCO contents was investigated in a designed hybrid reactor system. In this system, the molten salt-heavy metal mixtures 93 - 85 % Li{sub 20}Sn{sub 80} + 5 % SFG-PuO{sub 2} and 2 - 10 % UO{sub 2}, 93 - 85 % Li{sub 20}Sn{sub 80} + 5 % SFG-PuO{sub 2} and 2 - 10 % NpO{sub 2}, 93 - 85 % Li{sub 20}Sn{sub 80} + 5 % SFG-PuO{sub 2} and 2 - 10 % UCO were used as fluids. Beryllium (Be) is used as neutron multiplier by (n,2n) reactions. Thence, a Be zone with a width of 3 cm was used in order to contribute on fissile fuel breeding between the liquid first wall and blanket. (n,γ) reactions were calculated in the liquid first wall, blanket and shield zones, which SFG-PuO{sub 2}, UO{sub 2}, NpO{sub 2} and UCO contents. 9Cr2WVTa ferritic steel with the width of 4 cm was used as the structural material. Three-dimensional nucleonic calculations were performed using the most recent version MCNPX-2.7.0 the Monte Carlo code and nuclear data library ENDF/B-VII.0. (orig.)

  5. Investigation of (n,γ) reactions in fissionable fluids in a hybrid reactor system

    International Nuclear Information System (INIS)

    Guenay, Mehtap

    2014-01-01

    In this study, the effect of (n,γ) reactions in spent fuel-grade (SFG)-PuO 2 , UO 2 , NpO 2 and UCO contents was investigated in a designed hybrid reactor system. In this system, the molten salt-heavy metal mixtures 93 - 85 % Li 20 Sn 80 + 5 % SFG-PuO 2 and 2 - 10 % UO 2 , 93 - 85 % Li 20 Sn 80 + 5 % SFG-PuO 2 and 2 - 10 % NpO 2 , 93 - 85 % Li 20 Sn 80 + 5 % SFG-PuO 2 and 2 - 10 % UCO were used as fluids. Beryllium (Be) is used as neutron multiplier by (n,2n) reactions. Thence, a Be zone with a width of 3 cm was used in order to contribute on fissile fuel breeding between the liquid first wall and blanket. (n,γ) reactions were calculated in the liquid first wall, blanket and shield zones, which SFG-PuO 2 , UO 2 , NpO 2 and UCO contents. 9Cr2WVTa ferritic steel with the width of 4 cm was used as the structural material. Three-dimensional nucleonic calculations were performed using the most recent version MCNPX-2.7.0 the Monte Carlo code and nuclear data library ENDF/B-VII.0. (orig.)

  6. Leadership Strategies in Implementation of High-School Standards-Based Grading Systems

    Science.gov (United States)

    Pritzl, Jerome

    2016-01-01

    This multi-site case study examined leadership strategies used during successful implementation of standards-based grading systems in three Wisconsin high schools. It found that leaders' reported commitment, patience, and persistence showed evidence of sustainable, high-functioning systems. It drew two main conclusions: first, school leaders need…

  7. Ready to Assemble: Grading State Higher Education Accountability Systems

    Science.gov (United States)

    Aldeman, Chad; Carey, Kevin

    2009-01-01

    States need strong higher education systems, now more than ever. In the tumultuous, highly competitive 21st century economy, citizens and workers need knowledge, skills, and credentials in order to prosper. Yet many colleges and universities are falling short. To give all students the best possible postsecondary education, states must create…

  8. Control of transversal instabilities in reaction-diffusion systems

    Science.gov (United States)

    Totz, Sonja; Löber, Jakob; Totz, Jan Frederik; Engel, Harald

    2018-05-01

    In two-dimensional reaction-diffusion systems, local curvature perturbations on traveling waves are typically damped out and vanish. However, if the inhibitor diffuses much faster than the activator, transversal instabilities can arise, leading from flat to folded, spatio-temporally modulated waves and to spreading spiral turbulence. Here, we propose a scheme to induce or inhibit these instabilities via a spatio-temporal feedback loop. In a piecewise-linear version of the FitzHugh–Nagumo model, transversal instabilities and spiral turbulence in the uncontrolled system are shown to be suppressed in the presence of control, thereby stabilizing plane wave propagation. Conversely, in numerical simulations with the modified Oregonator model for the photosensitive Belousov–Zhabotinsky reaction, which does not exhibit transversal instabilities on its own, we demonstrate the feasibility of inducing transversal instabilities and study the emerging wave patterns in a well-controlled manner.

  9. Redox reaction in photochemical and ionizing irradiation systems

    International Nuclear Information System (INIS)

    Slama-Schwok, A.

    1985-09-01

    This work presents a basic study of electron transfer reactions which could be involved in appropriate systems for photochemical conversion and storage of solar energy. The aim was to extend the knowledge to new photosensitizers and quenchers and to compare them with the most popular photosensitizers-quenchers system, i.e. a rubidium complex. The photosensitizer studied here is an irridium complex. We studied in this work the air oxidation of bromide to Br 3 - and H 2 O 2 using the irridium complex as the sensitizer. The reducing properties of the reduced irridium complex photosensitizer were studied, using the pulse radiolysis techniques. In conclusion, the oxidation reduction properties of the irridium and its lowest excited state correspond to most of the photosensitizer for electron transfer reactions. The energy temporary present in the charge separation products can be stored using appropriate environment such as polyelectrolytes

  10. [GRADE system: classification of quality of evidence and strength of recommendation].

    Science.gov (United States)

    Aguayo-Albasini, José Luis; Flores-Pastor, Benito; Soria-Aledo, Víctor

    2014-02-01

    The acquisition and classification of scientific evidence, and subsequent formulation of recommendations constitute the basis for the development of clinical practice guidelines. There are several systems for the classification of evidence and strength of recommendations; the most commonly used nowadays is the Grading of Recommendations, Assessment, Development and Evaluation system (GRADE). The GRADE system initially classifies the evidence into high or low, coming from experimental or observational studies; subsequently and following a series of considerations, the evidence is classified into high, moderate, low or very low. The strength of recommendations is based not only on the quality of the evidence, but also on a series of factors such as the risk/benefit balance, values and preferences of the patients and professionals, and the use of resources or costs. Copyright © 2013 AEC. Published by Elsevier Espana. All rights reserved.

  11. Turing Patterns in a Reaction-Diffusion System

    International Nuclear Information System (INIS)

    Wu Yanning; Wang Pingjian; Hou Chunju; Liu Changsong; Zhu Zhengang

    2006-01-01

    We have further investigated Turing patterns in a reaction-diffusion system by theoretical analysis and numerical simulations. Simple Turing patterns and complex superlattice structures are observed. We find that the shape and type of Turing patterns depend on dynamical parameters and external periodic forcing, and is independent of effective diffusivity rate σ in the Lengyel-Epstein model. Our numerical results provide additional insight into understanding the mechanism of development of Turing patterns and predicting new pattern formations.

  12. System and process for pulsed multiple reaction monitoring

    Science.gov (United States)

    Belov, Mikhail E

    2013-05-17

    A new pulsed multiple reaction monitoring process and system are disclosed that uses a pulsed ion injection mode for use in conjunction with triple-quadrupole instruments. The pulsed injection mode approach reduces background ion noise at the detector, increases amplitude of the ion signal, and includes a unity duty cycle that provides a significant sensitivity increase for reliable quantitation of proteins/peptides present at attomole levels in highly complex biological mixtures.

  13. Robotic reactions: Delay-induced patterns in autonomous vehicle systems

    Science.gov (United States)

    Orosz, Gábor; Moehlis, Jeff; Bullo, Francesco

    2010-02-01

    Fundamental design principles are presented for vehicle systems governed by autonomous cruise control devices. By analyzing the corresponding delay differential equations, it is shown that for any car-following model short-wavelength oscillations can appear due to robotic reaction times, and that there are tradeoffs between the time delay and the control gains. The analytical findings are demonstrated on an optimal velocity model using numerical continuation and numerical simulation.

  14. Robotic reactions: delay-induced patterns in autonomous vehicle systems.

    Science.gov (United States)

    Orosz, Gábor; Moehlis, Jeff; Bullo, Francesco

    2010-02-01

    Fundamental design principles are presented for vehicle systems governed by autonomous cruise control devices. By analyzing the corresponding delay differential equations, it is shown that for any car-following model short-wavelength oscillations can appear due to robotic reaction times, and that there are tradeoffs between the time delay and the control gains. The analytical findings are demonstrated on an optimal velocity model using numerical continuation and numerical simulation.

  15. Gas dynamic reaction process and system for laser chemistry

    International Nuclear Information System (INIS)

    Garbuny, M.

    1979-01-01

    A reaction system is disclosed wherein a moving, unidirectional stream of an activatable gaseous species is produced, the individual members of which have the forward components of their velocities at least 10 times greater than the lateral components of their velocities. The stream is irradiated with substantially monochromatic light having a frequency which activates at least some of the individual members of the species. The activated members can then be reacted with another stream or otherwise utilized

  16. A Real-Time Apple Grading System Using Multicolor Space

    Directory of Open Access Journals (Sweden)

    Hayrettin Toylan

    2014-01-01

    Full Text Available This study was focused on the multicolor space which provides a better specification of the color and size of the apple in an image. In the study, a real-time machine vision system classifying apples into four categories with respect to color and size was designed. In the analysis, different color spaces were used. As a result, 97% identification success for the red fields of the apple was obtained depending on the values of the parameter “a” of CIE L*a*b*color space. Similarly, 94% identification success for the yellow fields was obtained depending on the values of the parameter y of CIE XYZ color space. With the designed system, three kinds of apples (Golden, Starking, and Jonagold were investigated by classifying them into four groups with respect to two parameters, color and size. Finally, 99% success rate was achieved in the analyses conducted for 595 apples.

  17. Intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injuries

    International Nuclear Information System (INIS)

    Wangensteen, Arnlaug; Tol, Johannes L.; Roemer, Frank W.; Bahr, Roald; Dijkstra, H. Paul; Crema, Michel D.; Farooq, Abdulaziz; Guermazi, Ali

    2017-01-01

    Highlights: • Three different MRI grading and classification systems for acute hamstring injuries are overall reliable. • Reliability for the subcategories within these MRI grading and classification systems remains, however, unclear. - Abstract: Objective: To assess and compare the intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injury. Methods: Male athletes (n = 40) with clinical diagnosis of acute hamstring injury and MRI ≤5 days were selected from a prospective cohort. Two radiologists independently evaluated the MRIs using standardised scoring form including the modified Peetrons grading system, the Chan acute muscle strain injury classification and the British Athletics Muscle Injury Classification. Intra-and interrater reliability was assessed with linear weighted kappa (κ) or unweighted Cohen's κ and percentage agreement was calculated. Results: We observed ‘substantial’ to ‘almost perfect’ intra- (κ range 0.65–1.00) and interrater reliability (κ range 0.77–1.00) with percentage agreement 83–100% and 88–100%, respectively, for severity gradings, overall anatomical sites and overall classifications for the three MRI systems. We observed substantial variability (κ range −0.05 to 1.00) for subcategories within the Chan classification and the British Athletics Muscle Injury Classification, however, the prevalence of positive scorings was low for some subcategories. Conclusions: The modified Peetrons grading system, overall Chan classification and overall British Athletics Muscle Injury Classification demonstrated ‘substantial' to ‘almost perfect' intra- and interrater reliability when scored by experienced radiologists. The intra- and interrater reliability for the anatomical subcategories within the classifications remains unclear.

  18. Intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injuries

    Energy Technology Data Exchange (ETDEWEB)

    Wangensteen, Arnlaug, E-mail: arnlaug.wangensteen@nih.no [Aspetar, Orthopaedic and Sports Medicine Hospital, Doha (Qatar); Oslo Sports Trauma Research Center, Department of Sports Medicine, Norwegian School of Sport Sciences, Oslo (Norway); Tol, Johannes L., E-mail: johannes.tol@aspetar.com [Aspetar, Orthopaedic and Sports Medicine Hospital, Doha (Qatar); Amsterdam Center for Evidence Sports Medicine, Academic Medical Center (Netherlands); The Sports Physician Group, OLVG, Amsterdam (Netherlands); Roemer, Frank W. [Quantitative Imaging Center, Department of Radiology, Boston University School of Medicine, Boston, MA (United States); Department of Radiology, University of Erlangen-Nuremberg, Erlangen (Germany); Bahr, Roald [Aspetar, Orthopaedic and Sports Medicine Hospital, Doha (Qatar); Oslo Sports Trauma Research Center, Department of Sports Medicine, Norwegian School of Sport Sciences, Oslo (Norway); Dijkstra, H. Paul [Aspetar, Orthopaedic and Sports Medicine Hospital, Doha (Qatar); Crema, Michel D. [Quantitative Imaging Center, Department of Radiology, Boston University School of Medicine, Boston, MA (United States); Department of Radiology, Saint-Antoine Hospital, University Paris VI, Paris (France); Farooq, Abdulaziz [Aspetar, Orthopaedic and Sports Medicine Hospital, Doha (Qatar); Guermazi, Ali [Quantitative Imaging Center, Department of Radiology, Boston University School of Medicine, Boston, MA (United States)

    2017-04-15

    Highlights: • Three different MRI grading and classification systems for acute hamstring injuries are overall reliable. • Reliability for the subcategories within these MRI grading and classification systems remains, however, unclear. - Abstract: Objective: To assess and compare the intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injury. Methods: Male athletes (n = 40) with clinical diagnosis of acute hamstring injury and MRI ≤5 days were selected from a prospective cohort. Two radiologists independently evaluated the MRIs using standardised scoring form including the modified Peetrons grading system, the Chan acute muscle strain injury classification and the British Athletics Muscle Injury Classification. Intra-and interrater reliability was assessed with linear weighted kappa (κ) or unweighted Cohen's κ and percentage agreement was calculated. Results: We observed ‘substantial’ to ‘almost perfect’ intra- (κ range 0.65–1.00) and interrater reliability (κ range 0.77–1.00) with percentage agreement 83–100% and 88–100%, respectively, for severity gradings, overall anatomical sites and overall classifications for the three MRI systems. We observed substantial variability (κ range −0.05 to 1.00) for subcategories within the Chan classification and the British Athletics Muscle Injury Classification, however, the prevalence of positive scorings was low for some subcategories. Conclusions: The modified Peetrons grading system, overall Chan classification and overall British Athletics Muscle Injury Classification demonstrated ‘substantial' to ‘almost perfect' intra- and interrater reliability when scored by experienced radiologists. The intra- and interrater reliability for the anatomical subcategories within the classifications remains unclear.

  19. Modelling biochemical reaction systems by stochastic differential equations with reflection.

    Science.gov (United States)

    Niu, Yuanling; Burrage, Kevin; Chen, Luonan

    2016-05-07

    In this paper, we gave a new framework for modelling and simulating biochemical reaction systems by stochastic differential equations with reflection not in a heuristic way but in a mathematical way. The model is computationally efficient compared with the discrete-state Markov chain approach, and it ensures that both analytic and numerical solutions remain in a biologically plausible region. Specifically, our model mathematically ensures that species numbers lie in the domain D, which is a physical constraint for biochemical reactions, in contrast to the previous models. The domain D is actually obtained according to the structure of the corresponding chemical Langevin equations, i.e., the boundary is inherent in the biochemical reaction system. A variant of projection method was employed to solve the reflected stochastic differential equation model, and it includes three simple steps, i.e., Euler-Maruyama method was applied to the equations first, and then check whether or not the point lies within the domain D, and if not perform an orthogonal projection. It is found that the projection onto the closure D¯ is the solution to a convex quadratic programming problem. Thus, existing methods for the convex quadratic programming problem can be employed for the orthogonal projection map. Numerical tests on several important problems in biological systems confirmed the efficiency and accuracy of this approach. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. A Real-Time Apple Grading System Using Multicolor Space

    OpenAIRE

    Toylan, Hayrettin; Kuscu, Hilmi

    2014-01-01

    This study was focused on the multicolor space which provides a better specification of the color and size of the apple in an image. In the study, a real-time machine vision system classifying apples into four categories with respect to color and size was designed. In the analysis, different color spaces were used. As a result, 97% identification success for the red fields of the apple was obtained depending on the values of the parameter “a” of CIE L*a*b*color space. Similarly, 94% identific...

  1. Plutonium Finishing Plant (PFP) Criticality Alarm System Commercial Grade Item (CGI) Critical Characteristics

    International Nuclear Information System (INIS)

    WHITE, W.F.

    1999-01-01

    This document specifies the critical characteristics for Commercial Grade Items (CGI) procured for PFP's criticality alarm system as required by HNF-PRO-268 and HNF-PRO-1819. These are the minimum specifications that the equipment must meet in order to properly perform its safety function. There may be several manufacturers or models that meet the critical characteristics for any one item. PFP's Criticality Alarm System includes the nine criticality alarm system panels and their associated hardware. This includes all parts up to the first breaker in the electrical distribution system. Specific system boundaries and justifications are contained in HNF-SD-CP-SDD-003, ''Definition and Means of Maintaining the Criticality Detectors and Alarms Portion of the PFP Safety Envelope.'' The procurement requirements associated with the system necessitates procurement of some system equipment as Commercial Grade Items in accordance with HNF-PRO-268, ''Control of Purchased Items and Services.''

  2. Post-Mission Quality Assurance Procedure for Survey-Grade Mobile Mapping Systems

    Science.gov (United States)

    Kerstinga, A. P.; Friess, P.

    2016-06-01

    Mobile Mapping Systems (MMS) consist of terrestrial-based moving platforms that integrate a set of imaging sensors (typically digital cameras and laser scanners) and a Position and Orientation System (POS), designed to collect data of the surrounding environment. MMS can be classified as "mapping-grade" or "survey-grade" depending on the system's attainable accuracy. Mapping-grade MMS produce geospatial data suitable for GIS applications (e.g., asset management) while survey-grade systems should satisfy high-accuracy applications such as engineering/design projects. The delivered accuracy of an MMS is dependent on several factors such as the accuracy of the system measurements and calibration parameters. It is critical, especially for survey-grade systems, to implement a robust Quality Assurance (QA) procedure to ensure the achievement of the expected accuracy. In this paper, a new post-mission QA procedure is presented. The presented method consists of a fully-automated self-calibration process that allows for the estimation of corrections to the system calibration parameters (e.g., boresight angles and lever-arm offsets relating the lidar sensor(s) to the IMU body frame) as well as corrections to the system measurements (e.g., post-processed trajectory position and orientation, scan angles and ranges). As for the system measurements, the major challenge for MMS is related to the trajectory determination in the presence of multipath signals and GNSS outages caused by buildings, underpasses and high vegetation. In the proposed self-calibration method, trajectory position errors are properly modelled while utilizing an efficient/meaningful trajectory segmentation technique. The validity of the proposed method is demonstrated using a dataset collected under unfavorable GNSS conditions.

  3. Global dynamics of a reaction-diffusion system

    Directory of Open Access Journals (Sweden)

    Yuncheng You

    2011-02-01

    Full Text Available In this work the existence of a global attractor for the semiflow of weak solutions of a two-cell Brusselator system is proved. The method of grouping estimation is exploited to deal with the challenge in proving the absorbing property and the asymptotic compactness of this type of coupled reaction-diffusion systems with cubic autocatalytic nonlinearity and linear coupling. It is proved that the Hausdorff dimension and the fractal dimension of the global attractor are finite. Moreover, the existence of an exponential attractor for this solution semiflow is shown.

  4. On microscopic simulations of systems with model chemical reactions

    International Nuclear Information System (INIS)

    Gorecki, J.; Gorecka, J.N.

    1998-01-01

    Large scale computer simulations of model chemical systems play the role of idealized experiments in which theories may be tested. In this paper we present two applications of microscopic simulations based on the reactive hard sphere model. We investigate the influence of internal fluctuations on an oscillating chemical system and observe how they modify the phase portrait of it. Another application, we consider, is concerned with the propagation of a chemical wave front associated with a thermally activated reaction. It is shown that the nonequilibrium effects increase the front velocity if compared with the velocity of the front generated by a nonactivated process characterized by the same rate constant. (author)

  5. Heterogeneous-catalytic redox reactions in nitrate - formate systems

    International Nuclear Information System (INIS)

    Ananiev, A.V.; Shilov, V.P.; Tananaev, I.G.; Brossard, Ph.; Broudic, J.Ch.

    2000-01-01

    It was found that an intensive destruction of various organic and mineral substances - usual components of aqueous waste solutions (oxalic acid, complexones, urea, hydrazine, ammonium nitrate, etc.) takes place under the conditions of catalytic denitration. Kinetics and mechanisms of urea and ammonium nitrate decomposition in the system HNO 3 - HCOOH - Pt/SiO 2 are comprehensively investigated. The behaviour of uranium, neptunium and plutonium under the conditions of catalytic denitration is studied. It is shown, that under the certain conditions the formic acid is an effective reducer of the uranium (VI), neptunium (VI, V) and plutonium (VI, IV) ions. Kinetics of heterogeneous-catalytic red-ox reactions of uranium (VI), neptunium (VI, V) and plutonium (VI, IV) with formic acid are investigated. The mechanisms of the appropriate reactions are evaluated. (authors)

  6. Drug reaction with eosinophilia and systemic symptoms syndrome.

    Science.gov (United States)

    Spriet, Sarah; Banks, Taylor A

    2015-01-01

    Drug reaction with eosinophilia and systemic symptoms (DRESS) syndrome is a potentially life-threatening adverse drug reaction. To increase awareness of the potential for recurrence in patients with a history of DRESS syndrome and provide a brief review of the clinical characteristics, diagnosis, and management of this disease process. The authors selected and reviewed salient articles on the topic and incorporated pertinent information from the patient's clinical course. A case of recurrent DRESS triggered by a structurally unrelated drug is presented, followed by discussion of the clinical characteristics, diagnosis, and management. Clinical pearls and pitfalls are emphasized for the practicing allergist, clinical immunologist, and fellow-in-training. The most important steps in the treatment of this condition are the identification and removal of the offending agent. Providers should be aware of the potential for recurrent DRESS and recognize the importance of prompt management.

  7. The Necessity of a Graded Tariff System between Crude Oil and Oil Products

    Energy Technology Data Exchange (ETDEWEB)

    Kang, B.R. [SK Corporation, Seoul (Korea)

    2002-06-01

    Even though the graded tariff system between crude oil and oil products has been continuously insisted by oil refining companies since the export and import liberalization of 1997, and its necessity has been admitted by the government, press, and academia, the expanded implementation of the graded tariff system has not been yet realized. Some people says that the graded tariff system between crude oil and oil products is a kind of desperate plans, which oil refining companies suggests to stop the importing companies' rapid growth, so it will eventually restrict the competition of the domestic oil market due to the withering of importing companies. However, the graded tariff system between crude oil and oil products should have been enforced in 1997 as a complementary measure of the import liberalization like other industries or the advanced countries' cases. It is the basic tariff principle that the low tariff is levied on raw materials and the high tariff on final products in order to protect domestic industry. The remaining things are just to form the sympathy and to agree socially for the reorganization of tariff structure in the reasonable way. It is not desirable to make a fool mistake such as a proverb; t is too late to shut the stable door after the horse has bolted. owing to the unreasonable tariff system.

  8. ON THE REACTIONS IN ILMENITE, ALUMINUM AND GRAPHITE SYSTEM

    Directory of Open Access Journals (Sweden)

    R. Khoshhal

    2016-03-01

    Full Text Available Al2O3/TiC composites are used as cutting tools for machining gray cast iron and steels. The addition of iron improves the toughness of Al2O3/TiC composites. Ilmenite, aluminum and graphite can be used to produce in-situ Al2O3/TiC–Fe composites. However, the formation mechanism and reaction sequences of this system are not clear enough. Therefore, the present research is designed to determine the reactions mechanism of the first step of reactions that may be occurred between raw materials. In this research, pure ilmenite was synthesized to eliminate the effects of impurities available in the natural ilmenite in the system. The milled and pressed samples, prepared from the synthesized ilmenite, aluminum and graphite mixture with a molar ratio of 1:2:1, were heat treated at 720°C for 48h. In addition, two samples one containing ilmenite and aluminum with a molar ratio of 1:2 and ilmenite and graphite with a molar ratio of 1:1 were heat treated at 720°C for 48h. The final products were analyzed with XRD. It was found that at 720°C, aluminum reacts with FeTiO3, forming Fe, TiO2 and Al2O3. Since the aluminum content used in the mixture was more than the stoichiometry for reaction of ilmenite and aluminum, some unreacted aluminum remains. Therefore, the residual aluminum reacts with the reduced Fe to form Fe2Al5.

  9. Parental expectations, experiences and reactions, sense of coherence and grade of anxiety related to routine ultrasound examination with normal findings during pregnancy.

    Science.gov (United States)

    Ekelin, M; Crang Svalenius, E; Larsson, A-K; Nyberg, P; Marsál, K; Dykes, A-K

    2009-10-01

    To investigate parents' expectations, experiences and reactions, sense of coherence and anxiety before and after a second-trimester routine ultrasound examination, with normal findings. Before and after ultrasound questionnaires including the scales parents' expectations, experiences and reactions to routine ultrasound examination (PEER-U state of mind index), sense of coherence (SOC) and state and trait anxiety inventory (STAI), were sent to a 1-year cohort of women and their partners. Replies received were 2183. Both parents had significantly less worried state of mind (PEER-U) after the examination than before. Women had a lower grade of state anxiety after than before, but for men there was no significant change. Before the ultrasound, women had a higher degree of worried state of mind, as well as a higher grade of state and trait anxiety and a lower sense of coherence, than men. The women showed a greater reduction in worried state of mind than the men after the ultrasound examination. There were no significant differences in sense of coherence before and after ultrasound. Women and men are affected in their psychological well-being in relation to a routine ultrasound examination, but their sense of coherence remains stable.

  10. Enhancing On-Task Behavior in Fourth-Grade Students Using a Modified Color Wheel System

    Science.gov (United States)

    Blondin, Carolyn; Skinner, Christopher; Parkhurst, John; Wood, Allison; Snyder, Jamie

    2012-01-01

    The authors used a withdrawal design to evaluate the effects of a modified Color Wheel System (M-CWS) on the on-task behavior of 7 students enrolled in the 4th grade. Standard CWS procedures were modified to include a 4th set of rules designed to set behavioral expectation for cooperative learning activities. Mean data showed that immediately…

  11. Intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injuries.

    Science.gov (United States)

    Wangensteen, Arnlaug; Tol, Johannes L; Roemer, Frank W; Bahr, Roald; Dijkstra, H Paul; Crema, Michel D; Farooq, Abdulaziz; Guermazi, Ali

    2017-04-01

    To assess and compare the intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injury. Male athletes (n=40) with clinical diagnosis of acute hamstring injury and MRI ≤5days were selected from a prospective cohort. Two radiologists independently evaluated the MRIs using standardised scoring form including the modified Peetrons grading system, the Chan acute muscle strain injury classification and the British Athletics Muscle Injury Classification. Intra-and interrater reliability was assessed with linear weighted kappa (κ) or unweighted Cohen's κ and percentage agreement was calculated. We observed 'substantial' to 'almost perfect' intra- (κ range 0.65-1.00) and interrater reliability (κ range 0.77-1.00) with percentage agreement 83-100% and 88-100%, respectively, for severity gradings, overall anatomical sites and overall classifications for the three MRI systems. We observed substantial variability (κ range -0.05 to 1.00) for subcategories within the Chan classification and the British Athletics Muscle Injury Classification, however, the prevalence of positive scorings was low for some subcategories. The modified Peetrons grading system, overall Chan classification and overall British Athletics Muscle Injury Classification demonstrated 'substantial' to 'almost perfect' intra- and interrater reliability when scored by experienced radiologists. The intra- and interrater reliability for the anatomical subcategories within the classifications remains unclear. Copyright © 2017 Elsevier B.V. All rights reserved.

  12. Guidelines for guideline developers: a systematic review of grading systems for medical tests

    NARCIS (Netherlands)

    Gopalakrishna, Gowri; Langendam, Miranda W.; Scholten, Rob J. P. M.; Bossuyt, Patrick M. M.; Leeflang, Mariska M. G.

    2013-01-01

    A variety of systems have been developed to grade evidence and develop recommendations based on the available evidence. However, development of guidelines for medical tests is especially challenging given the typical indirectness of the evidence; direct evidence of the effects of testing on patient

  13. Construction of a food-grade multiple-copy integration system for Lactococcus lactis

    NARCIS (Netherlands)

    Leenhouts, K.; Bolhuis, A.; Venema, G.; Kok, J.

    A food-grade vector system was developed that allows stable integration of multiple plasmid copies in the chromosome of Lactococcus lactis. The vector consists of the plus origin of replication (Ori(+)) of the lactococcal plasmid pWV01, the sucrose genes of the lactic acid bacterium Pediococcus

  14. The predictive validity of grade point average scores in a partial lottery medical school admission system

    NARCIS (Netherlands)

    Cohen-Schotanus, Janke; Muijtjens, Arno M. M.; Reinders, Jan J.; Agsteribbe, Jessica; van Rossum, Herman J. M.; van der Vleuten, Cees P. M.

    2006-01-01

    PURPOSE To ascertain whether the grade point average (GPA) of school-leaving examinations is related to study success, career development and scientific performance. The problem of restriction of range was expected to be partially reduced due to the use of a national lottery system weighted in

  15. Automated grading of wood-slabs. The development of a prototype system

    DEFF Research Database (Denmark)

    Ersbøll, Bjarne Kjær; Conradsen, Knut

    1992-01-01

    This paper proposes a method for automatically grading small beechwood slabs. The method involves two classification steps: the first step detects defects based on local visual texture; the second step utilizes the relative distribution of defects to perform a final grading assessment. At a major...... as much as possible. A vast range of types of defects has to be considered when the grading is done. This and the fact that wood is a 'natural' material means it is not easily described using ordinary vision systems. The proposed method assumes a 3-D feature space which depends on local texture......-based measures of 'lightness', 'speckle' and 'dark deviation'. These measures are calculated for each pixel in an image of a slab. The feature space is separated into 12 decision regions corresponding to 12 'defect types'; these 'defects' are labeled as clear wood, wavy grain, split, black knots, ingrown bark...

  16. Pattern dynamics of the reaction-diffusion immune system.

    Science.gov (United States)

    Zheng, Qianqian; Shen, Jianwei; Wang, Zhijie

    2018-01-01

    In this paper, we will investigate the effect of diffusion, which is ubiquitous in nature, on the immune system using a reaction-diffusion model in order to understand the dynamical behavior of complex patterns and control the dynamics of different patterns. Through control theory and linear stability analysis of local equilibrium, we obtain the optimal condition under which the system loses stability and a Turing pattern occurs. By combining mathematical analysis and numerical simulation, we show the possible patterns and how these patterns evolve. In addition, we establish a bridge between the complex patterns and the biological mechanism using the results from a previous study in Nature Cell Biology. The results in this paper can help us better understand the biological significance of the immune system.

  17. Drug reaction with eosinophilia and systemic symptoms without skin rash.

    Science.gov (United States)

    Sasidharanpillai, Sarita; Binitha, Manikoth P; Manikath, Neeraj; Janardhanan, Anisha K

    2015-01-01

    Drug reaction with eosinophilia and systemic symptoms (DRESS) or drug hypersensitivity syndrome is considered as a severe cutaneous adverse drug reaction which is most commonly precipitated by aromatic anticonvulsants, lamotrigine, dapsone, allopurinol, minocycline, and salazopyrin. Its clinical manifestations are often variable. On rare occasions, it can present with only systemic involvement without any cutaneous features. A complete drug history is of paramount importance in making an early diagnosis. We report the case of a male patient who presented with fever, lymphadenopathy, hepatosplenomegaly, and hepatitis, 2 weeks after starting salazopyrin. The presence of atypical lymphocytes in the peripheral smear was indicative of a viral infection or a hematological dyscrasia. Bone marrow examination revealed a normocellular marrow with an increase in eosinophil precursors. Investigations for the common causes for fever and hepatitis were negative. The presence of eosinophilia, the temporal relationship of the symptoms with the initiation of treatment with salazopyrin, and the marked improvement on withdrawal of the drug along with the administration of systemic corticosteroids, were features consistent with the diagnosis of DRESS. With the incidence of this condition showing a rising trend, it is important for the clinician to be aware of its variable manifestations, as a delay in diagnosis and treatment can be fatal.

  18. The Fuhrman grading system has no prognostic value in patients with nonsarcomatoid chromophobe renal cell carcinoma.

    Science.gov (United States)

    Steffens, Sandra; Janssen, Martin; Roos, Frederik C; Becker, Frank; Steinestel, Julie; Abbas, Mahmoud; Steinestel, Konrad; Wegener, Gerd; Siemer, Stefan; Thüroff, Joachim W; Hofmann, Rainer; Stöckle, Michael; Schrader, Mark; Hartmann, Arndt; Hasenfus, Andrea; Kuczyk, Markus A; Junker, Kerstin; Schrader, Andres J

    2014-12-01

    The prognostic value of the Fuhrman nuclear grading system has been questioned for chromophobe renal cell carcinoma (chRCC) because this subtype frequently displays nuclear and nucleolar pleomorphism. The present study reevaluates this grading system in a series of patients with nonsarcomatoid chRCC. We identified 176 patients (3.6%) with nonsarcomatoid chRCC in a total of 4897 patients who underwent surgery for renal cell carcinoma at 5 centers in Germany between 1990 and 2010. The mean follow-up was 51.1 months. The 3 groups (G1 versus G2 versus G3/4) were comparable in terms of age, sex, tumor diameter, and lymph node metastasis. They only differed significantly in tumor stage (P = .01) and the incidence of synchronous visceral metastasis (P = .04). The 5-year cancer-specific survival rates were 84.4% for G1 (n = 32), 84.3% for G2 (n = 108), and 74.1% for G3/4 tumors (n = 33) (P = .58). Accordingly, multivariate analysis including age, sex, tumor stage, and metastatic disease did not identify Fuhrman grading as an independent predictor of cancer-specific survival in patients with chRCC (P = .4). We were able to demonstrate in a large multicenter cohort that the Fuhrman grading system does not qualify as a prognostic tool in patients with chRCC. Copyright © 2014 Elsevier Inc. All rights reserved.

  19. Performance analysis of a compact and low-cost mapping-grade mobile laser scanning system

    Science.gov (United States)

    Julge, Kalev; Vajakas, Toivo; Ellmann, Artu

    2017-10-01

    The performance of a low-cost, self-contained, compact, and easy to deploy mapping-grade mobile laser scanning (MLS) system, which is composed of a light detection and ranging sensor Velodyne VLP-16 and a dual antenna global navigation satellite system/inertial navigation system SBG Systems Ellipse-D, is analyzed. The field tests were carried out in car-mounted and backpack modes for surveying road engineering structures (such as roads, parking lots, underpasses, and tunnels) and coastal erosion zones, respectively. The impact of applied calculation principles on trajectory postprocessing, direct georeferencing, and the theoretical accuracy of the system is analyzed. A calibration method, based on Bound Optimization BY Quadratic Approximation, for finding the boresight angles of an MLS system is proposed. The resulting MLS point clouds are compared with high-accuracy static terrestrial laser scanning data and survey-grade MLS data from a commercially manufactured MLS system. The vertical, horizontal, and relative accuracy are assessed-the root-mean-square error (RMSE) values were determined to be 8, 15, and 3 cm, respectively. Thus, the achieved mapping-grade accuracy demonstrates that this relatively compact and inexpensive self-assembled MLS can be successfully used for surveying the geometry and deformations of terrain, buildings, road, and other engineering structures.

  20. Importance of the support and the grade of Pt in the oxygen reduction reaction; Importancia del soporte y del grado del Pt en la reaccion de reduccion de oxigeno

    Energy Technology Data Exchange (ETDEWEB)

    Enriquez M, O.; Fernandez V, S.M. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2004-07-01

    The technology of the fuel cells type Proton Exchange Membrane (PEM), needs to define clearly the influence of the different involved parameters, this is made in general using methods of electrochemical impedance, in which the involved reactions can be presupposed. Another form of making is identifying experimentally the influence of the different parameters. In this work the obtained results are reported with for the oxygen reduction reaction using as electro catalyst platinum analytical grade and fuel cell grade and like support graphite and vulcan. It was found that as much the support as the particle size modify the over potential for the oxygen reduction reaction (Orr). (Author)

  1. The applicability of a weight loss grading system in cancer cachexia: a longitudinal analysis.

    Science.gov (United States)

    Vagnildhaug, Ola Magne; Blum, David; Wilcock, Andrew; Fayers, Peter; Strasser, Florian; Baracos, Vickie E; Hjermstad, Marianne J; Kaasa, Stein; Laird, Barry; Solheim, Tora S

    2017-10-01

    A body mass index (BMI) adjusted weight loss grading system (WLGS) is related to survival in patients with cancer. The aim of this study was to examine the applicability of the WLGS by confirming its prognostic validity, evaluating its relationship to cachexia domains, and exploring its ability to predict cachexia progression. An international, prospective observational study of patients with incurable cancer was conducted. For each patient, weight loss grade was scored 0-4. Weight loss grade 0 represents a high BMI with limited weight loss, progressing through to weight loss grade 4 representing low BMI and a high degree of weight loss. Survival analyses were used to confirm prognostic validity. Analyses of variance were used to evaluate the relationship between the WLGS and cachexia domains [anorexia, dietary intake, Karnofsky performance status (KPS), and physical and emotional functioning]. Cox regression was used to evaluate if the addition of cachexia domains to the WLGS improved prognostic accuracy. Predictive ability of cachexia progression was assessed by estimating proportion of patients progressing to a more advanced weight loss grade. One thousand four hundred six patients were analysed (median age 66 years; 50% female, 63% KPS ≤ 70). The overall effect of the WLGS on survival was significant as expressed by change in -2 log likelihood (P cachexia domains significantly deteriorated with increasing weight loss grade, and deterioration was greatest for dietary intake, with a difference corresponding to 0.87 standard deviations between weight loss grades 0 and 4. The addition of KPS, anorexia, and physical and emotional functioning improved the prognostic accuracy of the WLGS. Likelihood of cachexia progression was greater in patients with weight loss grade 2 (39%) than that with weight loss grade 0 (19%) or 1 (22%). The WLGS is related to survival, cachexia domains, and the likelihood of progression. Adding certain cachexia domains to the WLGS

  2. A discrete model to study reaction-diffusion-mechanics systems.

    Science.gov (United States)

    Weise, Louis D; Nash, Martyn P; Panfilov, Alexander V

    2011-01-01

    This article introduces a discrete reaction-diffusion-mechanics (dRDM) model to study the effects of deformation on reaction-diffusion (RD) processes. The dRDM framework employs a FitzHugh-Nagumo type RD model coupled to a mass-lattice model, that undergoes finite deformations. The dRDM model describes a material whose elastic properties are described by a generalized Hooke's law for finite deformations (Seth material). Numerically, the dRDM approach combines a finite difference approach for the RD equations with a Verlet integration scheme for the equations of the mass-lattice system. Using this framework results were reproduced on self-organized pacemaking activity that have been previously found with a continuous RD mechanics model. Mechanisms that determine the period of pacemakers and its dependency on the medium size are identified. Finally it is shown how the drift direction of pacemakers in RDM systems is related to the spatial distribution of deformation and curvature effects.

  3. A discrete model to study reaction-diffusion-mechanics systems.

    Directory of Open Access Journals (Sweden)

    Louis D Weise

    Full Text Available This article introduces a discrete reaction-diffusion-mechanics (dRDM model to study the effects of deformation on reaction-diffusion (RD processes. The dRDM framework employs a FitzHugh-Nagumo type RD model coupled to a mass-lattice model, that undergoes finite deformations. The dRDM model describes a material whose elastic properties are described by a generalized Hooke's law for finite deformations (Seth material. Numerically, the dRDM approach combines a finite difference approach for the RD equations with a Verlet integration scheme for the equations of the mass-lattice system. Using this framework results were reproduced on self-organized pacemaking activity that have been previously found with a continuous RD mechanics model. Mechanisms that determine the period of pacemakers and its dependency on the medium size are identified. Finally it is shown how the drift direction of pacemakers in RDM systems is related to the spatial distribution of deformation and curvature effects.

  4. Action-reaction based parameters identification and states estimation of flexible systems

    OpenAIRE

    Khalil, Islam; Kunt, Emrah Deniz; Şabanoviç, Asif; Sabanovic, Asif

    2012-01-01

    This work attempts to identify and estimate flexible system's parameters and states by a simple utilization of the Action-Reaction law of dynamical systems. Attached actuator to a dynamical system or environmental interaction imposes an action that is instantaneously followed by a dynamical system reaction. The dynamical system's reaction carries full information about the dynamical system including system parameters, dynamics and externally applied forces that arise due to system interaction...

  5. Usage of Commercial Grade Programmable Digital Systems in Safety Related Applications

    International Nuclear Information System (INIS)

    Mandic, D.

    2006-01-01

    This paper explains methods and conditions, which if completely and correctly fulfilled, enable an operating NPP (Nuclear Power Plant) licensed and operating in accordance with the US codes and US regulatory requirements to use a commercial grade programmable digital device (PLC - Programmable Digital Controller, digital controller, digital computer or process computer) in a safety related application in a NPP. In mid 80's, when an intensive construction cycle of the new NPPs in the U.S.A. was completed, many equipment manufacturers either disappeared from the market or they abandoned their product lines that were designed and manufactured under 10 CFR Part 50 Appendix B quality assurance program. The quality assurance as defined by 10 CFR Part 50 Appendix B comprises all those planned and systematic actions necessary to provide adequate confidence that a Structure, System or Component (SSC) will perform satisfactorily in service . The operating NPPs faced the problem related to the availability of qualified equipment, components and spare parts. The US NRC (Nuclear Regulatory Commission) recognized that problem timely (Oct. 1978 revision of 10CFR21) and required a commercial grade item to be dedicated before it could be used as a basic component. A special process named Dedication of CGI - Commercial Grade Items if conducted properly, provides reasonable assurance that a commercial grade item to be used as a basic component will perform its intended safety related function and, in this respect, is deemed equivalent to an item designed and manufactured under 10 CFR Part 50 Appendix B. After that, the Dedication of CGI has been widely used mostly for relatively simple mechanical, electrical, and IandC components and spare parts. In order to provide guidance to the dedication process, EPRI has issued two documents (EPRI NP-5652 and Supplemental Guidance for EPRI NP-5652). All nuclear power plants, which comply with the US nuclear regulatory requirements, hindered as

  6. [Prostate cancer. Part 2: Review of the various tumor grading systems over the years 1966-2015 and future perspectives of the new grading of the International Society of Urological Pathology (ISUP)].

    Science.gov (United States)

    Helpap, B; Bubendorf, L; Kristiansen, G

    2016-02-01

    The continued development of methods in needle biopsies and radical prostatectomy for treatment of prostate cancer has given special emphasis to the question of the prognostic relevance of the various systems of grading. The classical purely histological grading system of Gleason has been modified several times in the past decades and cleared the way for a new grading system by the prognostic grading of Epstein. Assessment of the old and also modified combined histological and cytological grading of Mostofi, the World health Organization (WHO) and the urologic-pathological working group of prostate cancer in connection with the Gleason grading (combined Gleason-Helpap grading), has led to considerably improved rates of concordance between biopsy and radical prostatectomy and to improved estimations of prognosis beside its contribution to the development of a more practicable grading system for clinical use.

  7. A cellular automata approach to chemical reactions : 1 reaction controlled systems

    NARCIS (Netherlands)

    Korte, de A.C.J.; Brouwers, H.J.H.

    2013-01-01

    A direct link between the chemical reaction controlled (shrinking core) model and cellular automata, to study the dissolution of particles, is derived in this paper. Previous research on first and second order reactions is based on the concentration of the reactant. The present paper describes the

  8. The Simplest Chronoscope V: A Theory of Dual Primary and Secondary Reaction Time Systems.

    Science.gov (United States)

    Montare, Alberto

    2016-12-01

    Extending work by Montare, visual simple reaction time, choice reaction time, discriminative reaction time, and overall reaction time scores obtained from college students by the simplest chronoscope (a falling meterstick) method were significantly faster as well as significantly less variable than scores of the same individuals from electromechanical reaction timers (machine method). Results supported the existence of dual reaction time systems: an ancient primary reaction time system theoretically activating the V5 parietal area of the dorsal visual stream that evolved to process significantly faster sensory-motor reactions to sudden stimulations arising from environmental objects in motion, and a secondary reaction time system theoretically activating the V4 temporal area of the ventral visual stream that subsequently evolved to process significantly slower sensory-perceptual-motor reactions to sudden stimulations arising from motionless colored objects. © The Author(s) 2016.

  9. Hypersensitivity Reactions from Excipients in Systemic Glucocorticoid Formulations

    DEFF Research Database (Denmark)

    Calogiuri, Gianfranco; Garvey, Lene H; Romita, Paolo

    2016-01-01

    Glucocorticoids are the most widely used drugs for the treatment of hypersensitivity, however these drugs themselves and the excipients contained in commercial corticosteroid formulations are able to induce severe immediate-type hypersensitivity reactions. Reactions involving excipients have been...

  10. Rethinking pattern formation in reaction-diffusion systems

    Science.gov (United States)

    Halatek, J.; Frey, E.

    2018-05-01

    The present theoretical framework for the analysis of pattern formation in complex systems is mostly limited to the vicinity of fixed (global) equilibria. Here we present a new theoretical approach to characterize dynamical states arbitrarily far from (global) equilibrium. We show that reaction-diffusion systems that are driven by locally mass-conserving interactions can be understood in terms of local equilibria of diffusively coupled compartments. Diffusive coupling generically induces lateral redistribution of the globally conserved quantities, and the variable local amounts of these quantities determine the local equilibria in each compartment. We find that, even far from global equilibrium, the system is well characterized by its moving local equilibria. We apply this framework to in vitro Min protein pattern formation, a paradigmatic model for biological pattern formation. Within our framework we can predict and explain transitions between chemical turbulence and order arbitrarily far from global equilibrium. Our results reveal conceptually new principles of self-organized pattern formation that may well govern diverse dynamical systems.

  11. Geochemical constraints on chemolithoautotrophic reactions in hydrothermal systems

    Science.gov (United States)

    Shock, Everett L.; McCollom, Thomas; Schulte, Mitchell D.

    1995-06-01

    Thermodynamic calculations provide the means to quantify the chemical disequilibrium inherent in the mixing of redeuced hydrothermal fluids with seawater. The chemical energy available for metabolic processes in these environments can be evaluated by taking into account the pressure and temperature dependence of the apparent standard Gibbs free energies of reactions in the S-H2-H2O system together with geochemical constraints on pH, activities of aqueous sulfur species and fugacities of H2 and/or O2. Using present-day mixing of hydrothermal fluids and seawater as a starting point, it is shown that each mole of H2S entering seawater from hydrothermal fluids represents about 200,000 calories of chemical energy for metabolic systems able to catalyze H2S oxidation. Extrapolating to the early Earth, which was likely to have had an atmosphere more reduced than at present, shows that this chemical energy may have been a factor of two or so less. Nevertheless, mixing of hydrothermal fluids with seawater would have been an abundant source of chemical energy, and an inevitable consequence of the presence of an ocean on an initially hot Earth. The amount of energy available was more than enough for organic synthesis from CO2 or CO, and/or polymer formation, indicating that the vicinity of hydrothermal systems at the sea floor was an ideal location for the emergence of the first chemolithoautotrophic metabolic systems.

  12. Neonates with reduced neonatal lung function have systemic low-grade inflammation

    DEFF Research Database (Denmark)

    Chawes, Bo L.K.; Stokholm, Jakob; Bønnelykke, Klaus

    2015-01-01

    Background: Children and adults with asthma and impaired lung function have been reported to have low-grade systemic inflammation, but it is unknown whether this inflammation starts before symptoms and in particular whether low-grade inflammation is present in asymptomatic neonates with reduced...... lung function. ObjectiveWe sought to investigate the possible association between neonatal lung function and biomarkers of systemic inflammation.  Methods: Plasma levels of high-sensitivity C-reactive protein (hs-CRP), IL-1β, IL-6, TNF-α, and CXCL8 (IL-8) were measured at age 6 months in 300 children.......  Results: The neonatal forced expiratory volume at 0.5 seconds was inversely associated with hs-CRP (β-coefficient, −0.12; 95% CI, −0.21 to −0.04; P approach, including hs-CRP, IL-6...

  13. A parametric study of a humidification dehumidification (HDH) desalination system using low grade heat sources

    International Nuclear Information System (INIS)

    He, W.F.; Han, D.; Yue, C.; Pu, W.H.

    2015-01-01

    Highlights: • The HDH desalination system coupling with the waste heat plate LGHC is proposed. • Performance of the desalination system and the plate LGHC is presented. • Influence from the operation pressure on the system performance is investigated. • Gained investment ratio is proposed to characterize the desalination system consumption. - Abstract: Humidification dehumidification (HDH) desalination system is applicable to recover the low grade heat source to heat the seawater before the humidifier. In the paper, plate heat exchangers are integrated to recover the waste heat from the exhaust in the water heated closed air open water (CAOW) HDH desalination system. The performance of the HDH desalination system as well as the plate type of low grade heat collector (LGHC) is investigated at different operation pressures. Gain investment ratio (GIR) is proposed and defined to depict the overall consumption of the whole system. The simulation results show that the modified heat capacity ratio of the dehumidifier (HCRd) is vital for the performance of the HDH desalination system as well as the plate LGHC with a top value of gain output ratio (GOR) at the balance point, HCRd = 1, and the maximum GOR, GOR = 2.44, results from the raised pressure of p = 0.15 MPa. Furthermore, taking the cost for the heat transfer surface area of the LGHC and the air and seawater pipes into consideration, it is revealed that the conditions, HCRd > 1, are more economical due to the increase of GIR, which indicates the profit of unit consumption is more significant.

  14. Evaluation of Urinary Tract Dilation Classification System for Grading Postnatal Hydronephrosis.

    Science.gov (United States)

    Hodhod, Amr; Capolicchio, John-Paul; Jednak, Roman; El-Sherif, Eid; El-Doray, Abd El-Alim; El-Sherbiny, Mohamed

    2016-03-01

    We assessed the reliability and validity of the Urinary Tract Dilation classification system as a new grading system for postnatal hydronephrosis. We retrospectively reviewed charts of patients who presented with hydronephrosis from 2008 to 2013. We included patients diagnosed prenatally and those with hydronephrosis discovered incidentally during the first year of life. We excluded cases involving urinary tract infection, neurogenic bladder and chromosomal anomalies, those associated with extraurinary congenital malformations and those with followup of less than 24 months without resolution. Hydronephrosis was graded postnatally using the Society for Fetal Urology system, and then the management protocol was chosen. All units were regraded using the Urinary Tract Dilation classification system and compared to the Society for Fetal Urology system to assess reliability. Univariate and multivariate analyses were performed to assess the validity of the Urinary Tract Dilation classification system in predicting hydronephrosis resolution and surgical intervention. A total of 490 patients (730 renal units) were eligible to participate. The Urinary Tract Dilation classification system was reliable in the assessment of hydronephrosis (parallel forms 0.92). Hydronephrosis resolved in 357 units (49%), and 86 units (12%) were managed by surgical intervention. The remainder of renal units demonstrated stable or improved hydronephrosis. Multivariate analysis revealed that the likelihood of surgical intervention was predicted independently by Urinary Tract Dilation classification system risk group, while Society for Fetal Urology grades were predictive of likelihood of resolution. The Urinary Tract Dilation classification system is reliable for evaluation of postnatal hydronephrosis and is valid in predicting surgical intervention. Copyright © 2016 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

  15. Experimental evaluation of improved dual temperature hydrogen isotopic exchange reaction system

    International Nuclear Information System (INIS)

    Asakura, Yamato; Uchida, Shunsuke

    1984-01-01

    A proposed dual temperature hydrogen isotopic exchange reaction system between water and hydrogen gas is evaluated experimentally. The proposed system is composed of low temperature co-current reactors for reaction between water mists and hydrogen gas and high temperature co-current reactors for reaction between water vapor and hydrogen gas. Thus, operation is possible under atmospheric pressure with high reaction efficiency. Using the pilot test system which is composed of ten low temperature (30 0 C) reaction units and ten high temperature (200 0 C) reaction units, an experimental separation of deuterium from light water is carried out. The enrichment factor under steady state conditions, its dependency on operating time, and the reaction period necessary to obtain the steady state enrichment factor are determined experimentally and compared with calculations. It is shown that separation ability in a multistage reaction system can be estimated by numerical calculation using actual reaction efficiency in a unit reactor. (author)

  16. A simple and accurate grading system for orthoiodohippurate renal scans in the assessment of post-transplant renal function

    International Nuclear Information System (INIS)

    Zaki, S.K.; Bretan, P.N.; Go, R.T.; Rehm, P.K.; Streem, S.B.; Novick, A.C.

    1990-01-01

    Orthoiodohippurate renal scanning has proved to be a reliable, noninvasive method for the evaluation and followup of renal allograft function. However, a standardized system for grading renal function with this test is not available. We propose a simple grading system to distinguish the different functional phases of hippurate scanning in renal transplant recipients. This grading system was studied in 138 patients who were evaluated 1 week after renal transplantation. There was a significant correlation between the isotope renographic functional grade and clinical correlates of allograft function such as the serum creatinine level (p = 0.0001), blood urea nitrogen level (p = 0.0001), urine output (p = 0.005) and need for hemodialysis (p = 0.007). We recommend this grading system as a simple and accurate method to interpret orthoiodohippurate renal scans in the evaluation and followup of renal allograft recipients

  17. Inflight performance of the Ulysses reaction control system

    Science.gov (United States)

    McGarry, Andrew; Berry, William; Parker, David

    1997-01-01

    The Ulysses spacecraft has been exploring the heliosphere since October 1990 in a six-year polar orbit. Despite varying operational demands, the pressure-fed monopropellant hydrazine reaction control system (RCS) has experienced few problems. The observed anomalies, having minimal operational impact, include plume impingement effects, electrical power overload effects and hydrazine gas generation effects. These anomalies are presented and discussed, with emphasis on the first observation of gas in the hydrazine propellant. The relatively low gas generation rate is attributed to: the use of high purity hydrazine; the configuration of the spin-stabilized spacecraft; the extensive use of titanium alloys; and the efficiency of the thermal control of the propellant tank which maintains a temperature of 21 C.

  18. Allergic Sensitization at School Age is a Systemic Low-grade Inflammatory Disorder

    DEFF Research Database (Denmark)

    Chawes, B. L.; Stokholm, J.; Schoos, A.-M. M.

    2017-01-01

    allergic sensitization. Methods High-sensitivity C-reactive protein (hs-CRP), interleukin-1β (IL-1β), IL-6, tumor necrosis factor-α (TNF-α), and chemokine (C-X-C motif) ligand 8 (CXCL8) were measured in plasma at age 6 months (N = 214) and 7 years (N = 277) in children from the Copenhagen Prospective...... sensitization in school-aged children suggesting systemic low-grade inflammation as a phenotypic characteristic of this early-onset NCD....

  19. Development of Necessary Technology for localizing of Nuclear Safety Grade I and C System

    International Nuclear Information System (INIS)

    Kwon, Kee Choon; Jang, Tong Il; Kim, Jung Tack

    2010-08-01

    Through KNICS and Nu-Tech 2012, a MMIS(Man-Machine Interface System) package for nuclear plants was localized and is expected to be applied to SUN 1,2 plants. This study is aimed to support the application of the MMIS package including the following technologies that meet strengthened regulation requirements and enhanced utility's performance requirements to nuclear plants. - Dedication to safety-grade computers and real time operating systems - The broadband communication network for safety information - Application of the automatic test for safety systems - Application of programmable logic controllers to nuclear plants - Development strategy for an integrated SW development tool for control device

  20. Action-reaction based parameters identification and states estimation of flexible systems

    OpenAIRE

    Khalil, Islam Shoukry Mohammed; Şabanoviç, Asif; Sabanovic, Asif

    2010-01-01

    This work attempts to identify and estimate flexible system’s parameters and states by a simple utilization of the Action-Reaction law of dynamical systems. Attached actuator to a dynamical system or environmental interaction imposes an action that is instantaneously followed by a dynamical system reaction. The dynamical system’s reaction carries full information about the dynamical system including system parameters, dynamics and externally applied forces that arise due to system interaction...

  1. Decision support system for the detection and grading of hard exudates from color fundus photographs

    Science.gov (United States)

    Jaafar, Hussain F.; Nandi, Asoke K.; Al-Nuaimy, Waleed

    2011-11-01

    Diabetic retinopathy is a major cause of blindness, and its earliest signs include damage to the blood vessels and the formation of lesions in the retina. Automated detection and grading of hard exudates from the color fundus image is a critical step in the automated screening system for diabetic retinopathy. We propose novel methods for the detection and grading of hard exudates and the main retinal structures. For exudate detection, a novel approach based on coarse-to-fine strategy and a new image-splitting method are proposed with overall sensitivity of 93.2% and positive predictive value of 83.7% at the pixel level. The average sensitivity of the blood vessel detection is 85%, and the success rate of fovea localization is 100%. For exudate grading, a polar fovea coordinate system is adopted in accordance with medical criteria. Because of its competitive performance and ability to deal efficiently with images of variable quality, the proposed technique offers promising and efficient performance as part of an automated screening system for diabetic retinopathy.

  2. Cutaneous and systemic hypersensitivity reactions to metallic implants

    DEFF Research Database (Denmark)

    Basko-Plluska, Juliana L; Thyssen, Jacob P; Schalock, Peter C

    2011-01-01

    Cutaneous reactions to metal implants, orthopedic or otherwise, are well documented in the literature. The first case of a dermatitis reaction over a stainless steel fracture plate was described in 1966. Most skin reactions are eczematous and allergic in nature, although urticarial, bullous....... However, other metal ions as well as bone cement components can cause such hypersensitivity reactions. To complicate things, patients may also develop delayed-type hypersensitivity reactions to metals (ie, in-stent restenosis, prosthesis loosening, inflammation, pain, or allergic contact dermatitis...

  3. POST-MISSION QUALITY ASSURANCE PROCEDURE FOR SURVEY-GRADE MOBILE MAPPING SYSTEMS

    Directory of Open Access Journals (Sweden)

    A. P. Kerstinga

    2016-06-01

    Full Text Available Mobile Mapping Systems (MMS consist of terrestrial-based moving platforms that integrate a set of imaging sensors (typically digital cameras and laser scanners and a Position and Orientation System (POS, designed to collect data of the surrounding environment. MMS can be classified as “mapping-grade” or “survey-grade” depending on the system’s attainable accuracy. Mapping-grade MMS produce geospatial data suitable for GIS applications (e.g., asset management while survey-grade systems should satisfy high-accuracy applications such as engineering/design projects. The delivered accuracy of an MMS is dependent on several factors such as the accuracy of the system measurements and calibration parameters. It is critical, especially for survey-grade systems, to implement a robust Quality Assurance (QA procedure to ensure the achievement of the expected accuracy. In this paper, a new post-mission QA procedure is presented. The presented method consists of a fully-automated self-calibration process that allows for the estimation of corrections to the system calibration parameters (e.g., boresight angles and lever-arm offsets relating the lidar sensor(s to the IMU body frame as well as corrections to the system measurements (e.g., post-processed trajectory position and orientation, scan angles and ranges. As for the system measurements, the major challenge for MMS is related to the trajectory determination in the presence of multipath signals and GNSS outages caused by buildings, underpasses and high vegetation. In the proposed self-calibration method, trajectory position errors are properly modelled while utilizing an efficient/meaningful trajectory segmentation technique. The validity of the proposed method is demonstrated using a dataset collected under unfavorable GNSS conditions.

  4. Long-term occlusal changes assessed by the American Board of Orthodontics' model grading system.

    Science.gov (United States)

    Aszkler, Robert M; Preston, Charles B; Saltaji, Humam; Tabbaa, Sawsan

    2014-02-01

    The purpose of this study was to assess the long-term posttreatment changes in all criteria of the American Board of Orthodontics' (ABO) model grading system. We used plaster models from patients' final and posttreatment records. Thirty patients treated by 1 orthodontist using 1 bracket prescription were selected. An initial discrepancy index for each subject was performed to determine the complexity of each case. The final models were then graded using the ABO's model grading system immediately at posttreatment and postretention. Statistical analysis was performed on the 8 criteria of the model grading system, including paired t tests and Pearson correlations. An alpha of 0.05 was considered statistically significant. The average length of time between the posttreatment and postretention records was 12.7 ± 4.4 years. It was shown that alignment and rotations worsened by postretention (P = 0.014), and a weak statistically significant correlation at posttreatment and postretention was found (0.44; P = 0.016). Both marginal ridges and occlusal contacts scored less well at posttreatment. These criteria showed a significant decrease in scores between posttreatment and postretention (P <0.001), but the correlations were not statistically significant. The average total score showed a significant decrease between posttreatment and postretention (P <0.001), partly because of the large decrease in the previous 2 criteria. Higher scores for occlusal contacts and marginal ridges were found at the end of treatment; however, those scores and the overall scores for the 30 subjects improved in the postretention phase. Copyright © 2014. Published by Mosby, Inc.

  5. Social validity of the Social Skills Improvement System-Classwide Intervention Program (SSIS-CIP) in the primary grades.

    Science.gov (United States)

    Wollersheim Shervey, Sarah; Sandilos, Lia E; DiPerna, James C; Lei, Pui-Wa

    2017-09-01

    The purpose of this study was to examine the social validity of the Social Skills Improvement System-Classwide Intervention Program (SSIS-CIP) for teachers in the primary grades. Participants included 45 first and second grade teachers who completed a 16-item social validity questionnaire during each year of the SSIS-CIP efficacy trial. Findings indicated that teachers generally perceived the SSIS-CIP as a socially valid and feasible intervention for primary grades; however, teachers' ratings regarding ease of implementation and relevance and sequence demonstrated differences across grade levels in the second year of implementation. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  6. Susceptibility Imaging in Glial Tumor Grading; Using 3 Tesla Magnetic Resonance (MR) System and 32 Channel Head Coil.

    Science.gov (United States)

    Aydin, Omer; Buyukkaya, Ramazan; Hakyemez, Bahattin

    2017-01-01

    Susceptibility weighted imaging (SWI) is a velocity compensated, high-resolution three-dimensional (3D) spoiled gradient-echo sequence that uses magnitude and filtered-phase data. SWI seems to be a valuable tool for non-invasive evaluation of central nervous system gliomas. Relative cerebral blood volume (rCBV) ratio is one of the best noninvasive methods for glioma grading. Degree of intratumoral susceptibility signal (ITSS) on SWI correlates with rCBV ratio and histopathological grade. This study investigated the effectiveness of ITSS grading and rCBV ratio in preoperative assessment. Thirty-one patients (17 males and 14 females) with histopathogical diagnosis of glial tumor undergoing routine cranial MRI, SWI, and perfusion MRI examinations between October 2011 and July 2013 were retrospectively enrolled. All examinations were performed using 3T apparatus with 32-channel head coil. We used ITSS number for SWI grading. Correlations between SWI grade, rCBV ratio, and pathological grading were evaluated. ROC analysis was performed to determine the optimal rCBV ratio to distinguish between high-grade and low-grade glial tumors. There was a strong positive correlation between both pathological and SWI grading. We determined the optimal rCBV ratio to discriminate between high-grade and low-grade tumors to be 2.21. In conclusion, perfusion MRI and SWI using 3T MR and 32-channel head coil may provide useful information for preoperative glial tumor grading. SWI can be used as an accessory to perfusion MR technique in preoperative tumor grading.

  7. Measuring Listening Comprehension Skills of 5th Grade School Students with the Help of Web Based System

    Science.gov (United States)

    Acat, M. Bahaddin; Demiral, Hilmi; Kaya, Mehmet Fatih

    2016-01-01

    The main purpose of this study is to measure listening comprehension skills of 5th grade school students with the help of web based system. This study was conducted on 5th grade students studying at the primary schools of Eskisehir. The scale used in the process of the study is "Web Based Listening Scale". In the process of the study,…

  8. The Most Preferred and Effective Reviewer of L2 Writing among Automated Grading System, Peer Reviewer and Teacher

    Science.gov (United States)

    Tsai, Min-Hsiu

    2017-01-01

    Who is the most preferred and deemed the most helpful reviewer in improving student writing? This study exercised a blended teaching method which consists of three currently prevailing reviewers: the automated grading system (AGS, a web-based method), the peer review (a process-oriented approach), and the teacher grading technique (the…

  9. Reproducibility of the acute rejection diagnosis in human cardiac allografts. The Stanford Classification and the International Grading System

    DEFF Research Database (Denmark)

    Nielsen, H; Sørensen, Flemming Brandt; Nielsen, B

    1993-01-01

    Transplantation has become an accepted treatment of many cardiac end-stage diseases. Acute cellular rejection accounts for 15% to 20% of all graft failures. The first grading system of acute cellular rejection, the Stanford Classification, was introduced in 1979, and since then many other grading...

  10. Social Validity of the Social Skills Improvement System--Classwide Intervention Program (SSIS-CIP) in the Primary Grades

    Science.gov (United States)

    Wollersheim Shervey, Sarah; Sandilos, Lia E.; DiPerna, James C.; Lei, Pui-Wa

    2017-01-01

    The purpose of this study was to examine the social validity of the Social Skills Improvement System--Classwide Intervention Program (SSIS-CIP) for teachers in the primary grades. Participants included 45 first and second grade teachers who completed a 16-item social validity questionnaire during each year of the SSIS-CIP efficacy trial. Findings…

  11. Technetium and neptunium reactions in basalt/groundwater systems

    International Nuclear Information System (INIS)

    Meyer, R.E.; Arnold, W.D.; Kelmers, A.D.; Kessler, J.H.; Clark, R.J.; Johnson, J.S. Jr.; Young, G.C.; Case, F.I.; Westmoreland, C.G.

    1985-01-01

    Sorption isotherms and apparent concentration limits for Tc(VII) and Np(V) for a variety of groundwater/basalt systems were determined using Grande Ronde basalt samples representative of the Hanford Site candidate high-level waste repository. Under oxic redox conditions (air present), little or no sorption of technetium was observed; neptunium exhibited low to moderate sorption ratios. Under anoxic redox conditions (oxygen-free), low to moderate sorption of technetium was often observed, but the extent of sorption was highly dependent upon the groundwater composition and the method of pretreatment (if any) of the basalt. Sorption isotherms for technetium under reducing redox conditions (hydrazine added) indicate an apparent concentration limit of approximately 10 -6 mol/l Tc. No apparent concentration limit was found for neptunium for concentrations in groundwater up to 10 -6 mol/l and 8 x 10 -7 mol/l under oxic and reducing (hydrazine added) redox conditions, respectively. Valence control and valence analysis experiments suggest that the sorption or precipitation of Tc and Np from groundwater in the presence of basalt may result from a heterogeneous reaction occurring on the surface of the basalt. One of the critical factors of this reduction reaction appears to be the accessibility of the reactive ferrous iron component of the basalt. The laboratory simulation of groundwater redox conditions representative of the repository environment through the use of solution phase redox reagents is of questionable validity, and information obtained by such experimental methods may not be defensible for site performance assessment calculations. Anoxic experiments conducted in an argon-filled glove box appear better suited for the laboratory simulation of in situ redox conditions. 15 references, 6 figures

  12. Technetium and neptunium reactions in basalt/groundwater systems

    International Nuclear Information System (INIS)

    Meyer, R.E.; Arnold, W.D.; Kelmers, A.D.; Kessler, J.H.; Clark, R.J.; Johnson, J.S. Jr.; Young, G.C.; Case, F.I.; Westmoreland, C.G.; Florida State Univ., Tallahassee)

    1984-01-01

    Sorption isotherms and apparent concentration limits for Tc(VII) and Np(V) for a variety of groundwater/basalt systems were determined using Grande Ronde basalt samples representative of the Hanford Site candidate high-level waste repository. Under oxic redox conditions (air present), little or no sorption of technetium was observed; neptunium exhibited low to moderate sorption ratios. Under anoxic redox conditions (oxygen-free), low to moderate sorption of technetium was often observed, but the extent of sorption was highly dependent upon the groundwater composition and the method of pretreatment (if any) of the basalt. Sorption isotherms for technetium under reducing redox conditions (hydrazine added) indicate an apparent concentration limit of approximately 10 -6 mol/L Tc. No apparent concentration limit was found for neptunium for concentrations in groundwater up to approx. 10 -6 mol/L and 8 x 10 -7 mol/L under oxic and reducing (hydrazine added) redox conditions, respectively. Valence control and valence analysis experiments suggest that the sorption or precipitation of Tc and Np from groundwater in the presence of basalt may result from a heterogeneous reaction occurring on the surface of the basalt. One of the critical factors of this reduction reaction appears to be the accessibility of the reactive ferrous iron component of the basalt. The laboratory simulation of groundwater redox conditions representative of the repository environment through the use of solution phase redox reagents is of questionable validity, and information obtained by such experimental methods may not be defensible for site performance assessment calculations. Anoxic experiments conducted in an argon-filled glove box appear better suited for the laboratory simulation of in situ redox conditions. 15 refs., 6 tabs

  13. A Food-Grade Cloning System for Industrial Strains of Lactococcus lactis

    Science.gov (United States)

    Sørensen, Kim I.; Larsen, Rasmus; Kibenich, Annette; Junge, Mette P.; Johansen, Eric

    2000-01-01

    We have previously reported the construction of a food-grade cloning vector for Lactococcus using the ochre suppressor, supB, as the selective marker. This vector, pFG1, causes only a slight growth inhibition in the laboratory strain MG1363 but is unstable in the industrial strains tested. As supB suppresses both amber and ochre stop codons, which are present in 82% of all known lactococcal genes, this undesirable finding may result from the accumulation of elongated mistranslated polypeptides. Here, we report the development of a new food-grade cloning vector, pFG200, which is suitable for overexpressing a variety of genes in industrial strains of Lactococcus lactis. The vector uses an amber suppressor, supD, as selectable marker and consists entirely of Lactococcus DNA, with the exception of a small polylinker region. Using suppressible pyrimidine auxotrophs, selection and maintenance are efficient in any pyrimidine-free medium including milk. Importantly, the presence of this vector in a variety of industrial strains has no significant effect on the growth rate or the rate of acidification in milk, making this an ideal system for food-grade modification of industrially relevant L. lactis strains. The usefulness of this system is demonstrated by overexpressing the pepN gene in a number of industrial backgrounds. PMID:10742196

  14. Use of a Graded Approach in the Application of the Management System Requirements for Facilities and Activities

    International Nuclear Information System (INIS)

    2014-06-01

    IAEA Safety Standards Series No. GS-R-3, The Management System for Facilities and Activities, defines the requirements for establishing, implementing, assessing and continually improving a management system that integrates safety, health, environmental, security, quality and economical elements. It details the need to grade the application of the management system requirements to ensure that resources are deployed and appropriate controls are applied on the basis of the consideration of: the significance and complexity of each product or activity; the hazards and the magnitude of the potential impact (risks) associated with the safety, health, environmental, security, quality and economical elements of each product or activity; and the possible consequences if a product fails or an activity is carried out incorrectly. The grading of the application of the requirements detailed in IAEA Safety Standards Series No. GS-R-3 is especially essential when they are implemented in smaller facilities and activities. The grading is done to ensure that the management system for smaller facilities and activities are suitably tailored to the hazards and the magnitude of the potential impact of the facilities and activities. Detailed guidance on how the grading requirements of IAEA Safety Standards Series No. GS-R-3 can be met and how to ensure that grading is performed in a consistent manner can be found in IAEA Safety Standards Series No. GS-G-3.1, Application of the Management System for Facilities and Activities. In addition, it contains guidance on systematic grading methods which will reduce the likelihood and consequences of improper grading. This publication provides an overview of grading fundamentals, the grading process, the role of classification in the process and the typical controls that can be graded. It also provides practical guidance and examples of grading as required by IAEA Safety Standards Series No. GS-R-3 to develop and apply a method of grading

  15. Heterogeneity induces spatiotemporal oscillations in reaction-diffusion systems

    Science.gov (United States)

    Krause, Andrew L.; Klika, Václav; Woolley, Thomas E.; Gaffney, Eamonn A.

    2018-05-01

    We report on an instability arising in activator-inhibitor reaction-diffusion (RD) systems with a simple spatial heterogeneity. This instability gives rise to periodic creation, translation, and destruction of spike solutions that are commonly formed due to Turing instabilities. While this behavior is oscillatory in nature, it occurs purely within the Turing space such that no region of the domain would give rise to a Hopf bifurcation for the homogeneous equilibrium. We use the shadow limit of the Gierer-Meinhardt system to show that the speed of spike movement can be predicted from well-known asymptotic theory, but that this theory is unable to explain the emergence of these spatiotemporal oscillations. Instead, we numerically explore this system and show that the oscillatory behavior is caused by the destabilization of a steady spike pattern due to the creation of a new spike arising from endogeneous activator production. We demonstrate that on the edge of this instability, the period of the oscillations goes to infinity, although it does not fit the profile of any well-known bifurcation of a limit cycle. We show that nearby stationary states are either Turing unstable or undergo saddle-node bifurcations near the onset of the oscillatory instability, suggesting that the periodic motion does not emerge from a local equilibrium. We demonstrate the robustness of this spatiotemporal oscillation by exploring small localized heterogeneity and showing that this behavior also occurs in the Schnakenberg RD model. Our results suggest that this phenomenon is ubiquitous in spatially heterogeneous RD systems, but that current tools, such as stability of spike solutions and shadow-limit asymptotics, do not elucidate understanding. This opens several avenues for further mathematical analysis and highlights difficulties in explaining how robust patterning emerges from Turing's mechanism in the presence of even small spatial heterogeneity.

  16. Laser application for nuclear reaction product detecting system alignment

    International Nuclear Information System (INIS)

    Grantsev, V.I.; Dryapachenko, I.P.; Kornilov, V.A.; Nemets, O.F.; Rudenko, B.A.; Sokolov, M.V.; Struzhko, B.G.; Gnatovskij, A.V.; Bojchuk, V.N.

    1982-01-01

    A method for optical alignment of nuclear particle detector system using a laser beam and hologram is described. The method permits to arrange detectors very precisely in accordance with any chosen space coordinate values. The results of modelling the geometry of an experiment based on using the suggested method on cyclotron beams are described. A gas helium-neon laser with wavelength of 0.63 μm radiation power of an order of 2 MW and angular beam divergence less than 10 angular minutes is used for modelling. It is concluded that the laser and hologram application provides large possibilities for the modelling the geometry of experiments on nuclear reaction investigation. When necessary it is possible to obtain small nonius scale of reference beams by means of multiplicating properties of the wave front modulator-hologram system. It is also possible to record holograms shaping the reference beams in two or several planes crossing along the central beam direction. Such holograms can be used for modelling the noncoplanar geometry of correlation experiments [ru

  17. Stability Analysis of a Reaction-Diffusion System Modeling Atherogenesis

    KAUST Repository

    Ibragimov, Akif

    2010-01-01

    This paper presents a linear, asymptotic stability analysis for a reaction-diffusionconvection system modeling atherogenesis, the initiation of atherosclerosis, as an inflammatory instability. Motivated by the disease paradigm articulated by Ross, atherogenesis is viewed as an inflammatory spiral with a positive feedback loop involving key cellular and chemical species interacting and reacting within the intimal layer of muscular arteries. The inflammatory spiral is initiated as an instability from a healthy state which is defined to be an equilibrium state devoid of certain key inflammatory markers. Disease initiation is studied through a linear, asymptotic stability analysis of a healthy equilibrium state. Various theorems are proved, giving conditions on system parameters guaranteeing stability of the health state, and a general framework is developed for constructing perturbations from a healthy state that exhibit blow-up, which are interpreted as corresponding to disease initiation. The analysis reveals key features that arterial geometry, antioxidant levels, and the source of inflammatory components (through coupled third-kind boundary conditions or through body sources) play in disease initiation. © 2010 Society for Industrial and Applied Mathematics.

  18. Cutaneous and systemic hypersensitivity reactions to metallic implants

    DEFF Research Database (Denmark)

    Basko-Plluska, Juliana L; Thyssen, Jacob P; Schalock, Peter C

    2011-01-01

    ) following the insertion of intravascular stents, dental implants, cardiac pacemakers, or implanted gynecologic devices. Despite repeated attempts by researchers and clinicians to further understand this difficult area of medicine, the association between metal sensitivity and cutaneous allergic reactions......Cutaneous reactions to metal implants, orthopedic or otherwise, are well documented in the literature. The first case of a dermatitis reaction over a stainless steel fracture plate was described in 1966. Most skin reactions are eczematous and allergic in nature, although urticarial, bullous......, and vasculitic eruptions may occur. Also, more complex immune reactions may develop around the implants, resulting in pain, inflammation, and loosening. Nickel, cobalt, and chromium are the three most common metals that elicit both cutaneous and extracutaneous allergic reactions from chronic internal exposure...

  19. Novel grading system for quantification of cystic macular lesions in Usher syndrome.

    Science.gov (United States)

    Sliesoraityte, Ieva; Peto, Tunde; Mohand-Said, Saddek; Sahel, Jose Alain

    2015-12-10

    To evaluate novel grading system used to quantify optical coherence tomography (OCT) scans for cystic macular lesions (CML) in Usher syndrome (USH) patients, focusing on CML associated alterations in MOY7A and USH2A mutations. Two readers evaluated 76 patients' (mean age 42 ± 14 years) data prospectively uploaded on Eurush database. OCT was used to obtain high quality cross-sectional images through the fovea. The CML was graded as none, mild, moderate or severe, depending on the following features set: subretinal fluid without clearly detectable CML boundaries; central macular thickness; largest diameter of CML; calculated mean of all detectable CML; total number of detectable CML; retinal layers affected by CML. Intra-and inter-grader reproducibility was evaluated. CML were observed in 37 % of USH eyes, while 45 % were observed in MYO7A and 29 % in USH2A cases. Of those with CML: 52 % had mild, 22 % had moderate and 26 % had severe changes, respectively. CML were found in following retinal layers: 50 % inner nuclear layer, 44 % outer nuclear layer, 6 % retinal ganglion cell layer. For the inter-grader repeatability analysis, agreements rates for CML were 97 % and kappa statistics was 0.91 (95 % CI 0.83-0.99). For the intra-grader analysis, agreement rates for CML were 98 %, while kappa statistics was 0.96 (95 % CI 0.92-0.99). The novel grading system is a reproducible tool for grading OCT images in USH complicated by CML, and potentially could be used for objective tracking of macular pathology in clinical therapy trials.

  20. Independent V and V for Safety Grade I and C System

    International Nuclear Information System (INIS)

    Lee, Jang Soo; Kwon, Kee Choon; Lee, Dong Young

    2010-08-01

    Through KNICS and Nu-Tech 2012, a MMIS(Man-Machine Interface System) package for nuclear plants was localized and is expected to be applied to SUN 1,2 plants. This study is aimed to support the application of the MMIS package including the following technologies that meet strengthened regulation requirements and enhanced utility's performance requirements to nuclear plants. - Dedication to real time operating system for safety-grade computers - V and V of the broadband communication network for safety information - Independent V and V for application of programmable logic controllers to nuclear plants - Development strategy for an integrated SW development tool for control devices

  1. Independent V and V for Safety Grade I and C System

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jang Soo; Kwon, Kee Choon; Lee, Dong Young [KAERI, Daejeon (Korea, Republic of)

    2010-08-15

    Through KNICS and Nu-Tech 2012, a MMIS(Man-Machine Interface System) package for nuclear plants was localized and is expected to be applied to SUN 1,2 plants. This study is aimed to support the application of the MMIS package including the following technologies that meet strengthened regulation requirements and enhanced utility's performance requirements to nuclear plants. - Dedication to real time operating system for safety-grade computers - V and V of the broadband communication network for safety information - Independent V and V for application of programmable logic controllers to nuclear plants - Development strategy for an integrated SW development tool for control devices

  2. Performance of resistance grading system at 14 UD Pelletron Accelerator Facility, BARC-TIFR, Mumbai

    International Nuclear Information System (INIS)

    Lal, Ram; Matkar, U.V.; Ekambaram, M.; Lokare, R.N.; Yadav, M.L.; Gore, J.A.; Kulkarni, S.G.; Gupta, A.K.; Bhagwat, P.V.; Kale, R.M.; Karande, J.N.; Kurup, M.B.

    2005-01-01

    The 14UD Pelletron Accelerator has been in operation for last sixteen years, progressively with increased efficiency. Since inception the accelerator was operating in slit control mode, however, with the installation of a TPS system, it is now possible to operate the accelerator in GVM mode even with ion beam of low intensities. Recently all the column and tube corona points were replaced by resistances. This has helped in low voltage operation of accelerator. In this paper we will discuss in detail the performance of new Terminal Potential Stabiliser system, particularly, our experience resistance grading, at the Pelletron Accelerator. (author)

  3. Development of Necessary Technology for Safety Grade I and C System

    International Nuclear Information System (INIS)

    Lee, Dong Young; Jang, Tong Il; Kim, Jung Tack

    2010-08-01

    Through KNICS and Nu-Tech 2012, a MMIS(Man-Machine Interface System) package for nuclear plants was localized and is expected to be applied to SUN 1,2 plants. This study is aimed to support the application of the MMIS package including the following technologies that meet strengthened regulation requirements and enhanced utility's performance requirements to nuclear plants. - Dedication to safety-grade computers - The broadband communication network for safety information - Application of the automatic test for safety systems - Application of programmable logic controllers to nuclear plant

  4. Amplitude equations for a sub-diffusive reaction-diffusion system

    International Nuclear Information System (INIS)

    Nec, Y; Nepomnyashchy, A A

    2008-01-01

    A sub-diffusive reaction-diffusion system with a positive definite memory operator and a nonlinear reaction term is analysed. Amplitude equations (Ginzburg-Landau type) are derived for short wave (Turing) and long wave (Hopf) bifurcation points

  5. Automated grading system for evaluation of ocular redness associated with dry eye

    Directory of Open Access Journals (Sweden)

    Rodriguez JD

    2013-06-01

    Full Text Available John D Rodriguez,1 Patrick R Johnston,1 George W Ousler III,1 Lisa M Smith,1 Mark B Abelson1,21Ora, Inc, Andover, MA, USA; 2Department of Ophthalmology, Harvard Medical School, Boston, MA, USABackground: We have observed that dry eye redness is characterized by a prominence of fine horizontal conjunctival vessels in the exposed ocular surface of the interpalpebral fissure, and have incorporated this feature into the grading of redness in clinical studies of dry eye.Aim: To develop an automated method of grading dry eye-associated ocular redness in order to expand on the clinical grading system currently used.Methods: Ninety nine images from 26 dry eye subjects were evaluated by five graders using a 0–4 (in 0.5 increments dry eye redness (Ora CalibraTM Dry Eye Redness Scale [OCDER] scale. For the automated method, the Opencv computer vision library was used to develop software for calculating redness and horizontal conjunctival vessels (noted as "horizontality". From original photograph, the region of interest (ROI was selected manually using the open source ImageJ software. Total average redness intensity (Com-Red was calculated as a single channel 8-bit image as R − 0.83G − 0.17B, where R, G and B were the respective intensities of the red, green and blue channels. The location of vessels was detected by normalizing the blue channel and selecting pixels with an intensity of less than 97% of the mean. The horizontal component (Com-Hor was calculated by the first order Sobel derivative in the vertical direction and the score was calculated as the average blue channel image intensity of this vertical derivative. Pearson correlation coefficients, accuracy and concordance correlation coefficients (CCC were calculated after regression and standardized regression of the dataset.Results: The agreement (both Pearson's and CCC among investigators using the OCDER scale was 0.67, while the agreement of investigator to computer was 0.76. A multiple

  6. Automated grading system for evaluation of ocular redness associated with dry eye.

    Science.gov (United States)

    Rodriguez, John D; Johnston, Patrick R; Ousler, George W; Smith, Lisa M; Abelson, Mark B

    2013-01-01

    We have observed that dry eye redness is characterized by a prominence of fine horizontal conjunctival vessels in the exposed ocular surface of the interpalpebral fissure, and have incorporated this feature into the grading of redness in clinical studies of dry eye. To develop an automated method of grading dry eye-associated ocular redness in order to expand on the clinical grading system currently used. Ninety nine images from 26 dry eye subjects were evaluated by five graders using a 0-4 (in 0.5 increments) dry eye redness (Ora Calibra™ Dry Eye Redness Scale [OCDER]) scale. For the automated method, the Opencv computer vision library was used to develop software for calculating redness and horizontal conjunctival vessels (noted as "horizontality"). From original photograph, the region of interest (ROI) was selected manually using the open source ImageJ software. Total average redness intensity (Com-Red) was calculated as a single channel 8-bit image as R - 0.83G - 0.17B, where R, G and B were the respective intensities of the red, green and blue channels. The location of vessels was detected by normalizing the blue channel and selecting pixels with an intensity of less than 97% of the mean. The horizontal component (Com-Hor) was calculated by the first order Sobel derivative in the vertical direction and the score was calculated as the average blue channel image intensity of this vertical derivative. Pearson correlation coefficients, accuracy and concordance correlation coefficients (CCC) were calculated after regression and standardized regression of the dataset. The agreement (both Pearson's and CCC) among investigators using the OCDER scale was 0.67, while the agreement of investigator to computer was 0.76. A multiple regression using both redness and horizontality improved the agreement CCC from 0.66 and 0.69 to 0.76, demonstrating the contribution of vessel geometry to the overall grade. Computer analysis of a given image has 100% repeatability and zero

  7. Performance Analysis of a Grid-Connected Upgraded Metallurgical Grade Silicon Photovoltaic System

    Directory of Open Access Journals (Sweden)

    Chao Huang

    2016-05-01

    Full Text Available Because of their low cost, photovoltaic (PV cells made from upgraded metallurgical grade silicon (UMG-Si are a promising alternative to conventional solar grade silicon-based PV cells. This study investigates the outdoor performance of a 1.26 kW grid-connected UMG-Si PV system over five years, reporting the energy yields and performance ratio and estimating the long-term performance degradation rate. To make this investigation more meaningful, the performance of a mono-Si PV system installed at the same place and studied during the same period of time is presented for reference. Furthermore, this study systematizes and rationalizes the necessity of a data selection and filtering process to improve the accuracy of degradation rate estimation. The impact of plane-of-array irradiation threshold for data filtering on performance ratio and degradation rate is also studied. The UMG-Si PV system’s monthly performance ratio after data filtering ranged from 84% to 93% over the observation period. The annual degradation rate was 0.44% derived from time series of monthly performance ratio using the classical decomposition method. A comparison of performance ratio and degradation rate to conventional crystalline silicon-based PV systems suggests that performance of the UMG-Si PV system is comparable to that of conventional systems.

  8. Student Attitudes Toward Grades and Grading Practices.

    Science.gov (United States)

    Stallings, William M.; Leslie, Elwood K.

    The result of a study designed to assess student attitudes toward grading practices are discussed. Questionnaire responses of 3439 students in three institutions were tabulated. Responses were generally negative toward conventional grading systems. (MS)

  9. Hypoactivation of reward motivational system in patients with newly diagnosed hypertension grade I-II.

    Science.gov (United States)

    Aftanas, L I; Brak, I V; Gilinskaya, O M; Korenek, V V; Pavlov, S V; Reva, N V

    2014-08-01

    In patients with newly diagnosed untreated grade I-II hypertension, EEG oscillations were recorded under conditions activation of the two basic motivational systems, defensive motivational system and positive reinforcement system, evoked by recall of personally meaningful emotional events. The 64-channel EEG and cardiovascular reactivity (beat-by-beat technology) were simultaneously recorded. At rest, hypertensive patients had significantly reduced platelet serotonin concentrations in comparison with healthy individuals. The patients experiencing emotional activation were characterized by significantly lower intensity of positive emotions associated with more pronounced suppression of EEG activity in the delta (2-4 Hz) and theta (ranges of frequency 4-6 and 6-8 Hz) oscillators in the parieto-occipital cortex (zones P and PO) in both hemispheres of the brain. The findings attest to insufficient function of the brain serotonin system and hypoactivation of the reward/reinforcement system in patients with primary hypertension.

  10. Conditional symmetries for systems of PDEs: new definitions and their application for reaction-diffusion systems

    International Nuclear Information System (INIS)

    Cherniha, Roman

    2010-01-01

    New definitions of Q-conditional symmetry for systems of PDEs are presented, which generalize the standard notation of non-classical (conditional) symmetry. It is shown that different types of Q-conditional symmetry of a system generate a hierarchy of conditional symmetry operators. A class of two-component nonlinear reaction-diffusion systems is examined to demonstrate the applicability of the definitions proposed and it is shown when different definitions of Q-conditional symmetry lead to the same operators.

  11. Kinetic modelling of reactions in heated disaccharide-casein systems

    NARCIS (Netherlands)

    Brands, C.M.J.; Boekel, van M.A.J.S.

    2003-01-01

    The reactions occurring in disaccharide-casein reaction mixtures during heating at 120 degreesC and pH 6.8 were studied. The existence of two main degradation routes were established: (1) Isomerisation of the aldose sugars lactose and maltose in their ketose isomers lactulose and maltulose,

  12. Cutaneous and systemic hypersensitivity reactions to metallic implants.

    Science.gov (United States)

    Basko-Plluska, Juliana L; Thyssen, Jacob P; Schalock, Peter C

    2011-01-01

    Cutaneous reactions to metal implants, orthopedic or otherwise, are well documented in the literature. The first case of a dermatitis reaction over a stainless steel fracture plate was described in 1966. Most skin reactions are eczematous and allergic in nature, although urticarial, bullous, and vasculitic eruptions may occur. Also, more complex immune reactions may develop around the implants, resulting in pain, inflammation, and loosening. Nickel, cobalt, and chromium are the three most common metals that elicit both cutaneous and extracutaneous allergic reactions from chronic internal exposure. However, other metal ions as well as bone cement components can cause such hypersensitivity reactions. To complicate things, patients may also develop delayed-type hypersensitivity reactions to metals (ie, in-stent restenosis, prosthesis loosening, inflammation, pain, or allergic contact dermatitis) following the insertion of intravascular stents, dental implants, cardiac pacemakers, or implanted gynecologic devices. Despite repeated attempts by researchers and clinicians to further understand this difficult area of medicine, the association between metal sensitivity and cutaneous allergic reactions remains to be fully understood. This review provides an update of the current knowledge in this field and should be valuable to health care providers who manage patients with conditions related to this field.

  13. Nonlinear variational models for reaction and diffusion systems

    International Nuclear Information System (INIS)

    Tanyi, G.E.

    1983-08-01

    There exists a natural metric w.r.t. which the density dependent diffusion operator is harmonic in the sense of Eells and Sampson. A physical corollary of this statement is the property that any two regular points on the orbit of a reaction or diffusion operator can be connected by a path along which the reaction rate is constant. (author)

  14. Automated Grading System for Evaluation of Superficial Punctate Keratitis Associated With Dry Eye.

    Science.gov (United States)

    Rodriguez, John D; Lane, Keith J; Ousler, George W; Angjeli, Endri; Smith, Lisa M; Abelson, Mark B

    2015-04-01

    To develop an automated method of grading fluorescein staining that accurately reproduces the clinical grading system currently in use. From the slit lamp photograph of the fluorescein-stained cornea, the region of interest was selected and punctate dot number calculated using software developed with the OpenCV computer vision library. Images (n = 229) were then divided into six incremental severity categories based on computed scores. The final selection of 54 photographs represented the full range of scores: nine images from each of six categories. These were then evaluated by three investigators using a clinical 0 to 4 corneal staining scale. Pearson correlations were calculated to compare investigator scores, and mean investigator and automated scores. Lin's Concordance Correlation Coefficients (CCC) and Bland-Altman plots were used to assess agreement between methods and between investigators. Pearson's correlation between investigators was 0.914; mean CCC between investigators was 0.882. Bland-Altman analysis indicated that scores assessed by investigator 3 were significantly higher than those of investigators 1 and 2 (paired t-test). The predicted grade was calculated to be: Gpred = 1.48log(Ndots) - 0.206. The two-point Pearson's correlation coefficient between the methods was 0.927 (P < 0.0001). The CCC between predicted automated score Gpred and mean investigator score was 0.929, 95% confidence interval (0.884-0.957). Bland-Altman analysis did not indicate bias. The difference in SD between clinical and automated methods was 0.398. An objective, automated analysis of corneal staining provides a quality assurance tool to be used to substantiate clinical grading of key corneal staining endpoints in multicentered clinical trials of dry eye.

  15. The Theory of Thermodynamics for Chemical Reactions in Dispersed Heterogeneous Systems

    Science.gov (United States)

    Yongqiang; Baojiao; Jianfeng

    1997-07-01

    In this paper, the expressions of Gibbs energy change, enthalpy change, entropy change, and equilibrium constant for chemical reactions in dispersed heterogeneous systems are derived using classical thermodynamics theory. The thermodynamical relations for the same reaction system between the dispersed and the block state are also derived. The effects of degree of dispersion on thermodynamical properties, reaction directions, and chemical equilibria are discussed. The results show that the present equation of thermodynamics for chemical reactions is only a special case of the above-mentioned formulas and that the effect of the dispersity of a heterogeneous system on the chemical reaction obeys the Le Chatelier principle of movement of equilibria.

  16. Glicerólise de óleo de peixe catalisada por lipase comercial de Rhizomucor miehei em meio com surfactante de grau alimentício Glycerolysis of fish oil catalyzed by a commercial lipase from Rhizomucor miehei in reaction media containing food grade surfactant

    Directory of Open Access Journals (Sweden)

    Joanna Silva Santos

    2013-01-01

    Full Text Available Omega-3 enriched partial acylglycerols are beneficial for human health. The aim of this study was to obtain monoacylglycerols (MAG and diacylglycerols (DAG by means of glycerolysis of fish oil catalyzed by a lipase from Rhizomucor miehei in the presence of food grade surfactants (Tween 65, 80 or 85. Glycerolysis was successful in the reaction media for all the tested surfactants, showing their potential for use as additives in such a system. The best results, however, were obtained for the reaction medium in the absence of surfactant whose peroxide value was the lowest after glycerolysis.

  17. High-speed potato grading and quality inspection based on a color vision system

    Science.gov (United States)

    Noordam, Jacco C.; Otten, Gerwoud W.; Timmermans, Toine J. M.; van Zwol, Bauke H.

    2000-03-01

    A high-speed machine vision system for the quality inspection and grading of potatoes has been developed. The vision system grades potatoes on size, shape and external defects such as greening, mechanical damages, rhizoctonia, silver scab, common scab, cracks and growth cracks. A 3-CCD line-scan camera inspects the potatoes in flight as they pass under the camera. The use of mirrors to obtain a 360-degree view of the potato and the lack of product holders guarantee a full view of the potato. To achieve the required capacity of 12 tons/hour, 11 SHARC Digital Signal Processors perform the image processing and classification tasks. The total capacity of the system is about 50 potatoes/sec. The color segmentation procedure uses Linear Discriminant Analysis (LDA) in combination with a Mahalanobis distance classifier to classify the pixels. The procedure for the detection of misshapen potatoes uses a Fourier based shape classification technique. Features such as area, eccentricity and central moments are used to discriminate between similar colored defects. Experiments with red and yellow skin-colored potatoes have shown that the system is robust and consistent in its classification.

  18. A study on the establishment of safety assessment guidelines of commercial grade item dedication in digitalized safety systems

    International Nuclear Information System (INIS)

    Hwang, H. S.; Kim, B. R.; Oh, S. H.

    1999-01-01

    Because of obsolescing the components used in safety related systems of nuclear power plants, decreasing the number of suppliers qualified for the nuclear QA program and increasing maintenance costs of them, utilities have been considering to use commercial grade digital computers as an alternative for resolving such issues. However, commercial digital computers use the embedded pre-existing software, including operating system software, which are not developed by using nuclear grade QA program. Thus, it is necessary for utilities to establish processes for dedicating digital commercial grade items. A regulatory body also needs guidance to evaluate the digital commercial products properly. This paper surveyed the regulations and their regulatory guides, which establish the requirements for commercial grade items dedication, industry standards and guidances applicable to safety related systems. This paper provides some guidelines to be applied in evaluating the safety of digital upgrades and new digital plant protection systems in Korea

  19. Grade Point Average System of Assessment: the Implementation Peculiarities in Russia

    Directory of Open Access Journals (Sweden)

    B. A. Sazonov

    2012-01-01

    Full Text Available The paper analyzes the specificity, as well as flaws and faults of implementing the Grade Point Average (GPA system of students’ personal assessment in Russian higher schools. Nowadays, the above system is regarded as the basic functional element of educational process organization at the world’s leading universities. The author summarizes the foreign experience and demonstrates the advantages of the GPA system in comparison with the traditional domestic scale of assessment: full records of student’s assessment, objectivity, activation of responsibility for the results achieved, and self-control motivation. The standard GPA model is demonstrated, its application systemizing both the Russian and European requirements to the higher school graduates. The author suggests his own version of the assessment scale estimating and comparing the quality of education in Russian universities and worldwide. The research findings can be of interest to the specialists in the sphere of quality measurement and educational management. 

  20. Neuropathic pain. Redefinition and a grading system for clinical and research purposes

    DEFF Research Database (Denmark)

    Treede, R.-D.; Jensen, Troels Staehelin; Campbell, J.N.

    2008-01-01

    potentially tissue-damaging stimuli. Pain may also arise by activity generated within the nervous system without adequate stimulation of its peripheral sensory endings. For this type of pain, the International Association for the Study of Pain introduced the term neuropathic pain, defined as "pai...... evidence from a neurologic examination. This grading system is proposed for clinical and research purposes....... initiated or caused by a primary lesion or dysfunction in the nervous system." While this definition has been useful in distinguishing some characteristics of neuropathic and nociceptive types of pain, it lacks defined boundaries. Since the sensitivity of the nociceptive system is modulated by its adequate...... activation (e.g., by central sensitization), it has been difficult to distinguish neuropathic dysfunction from physiologic neuroplasticity. We present a more precise definition developed by a group of experts from the neurologic and pain community: pain arising as a direct consequence of a lesion or disease...

  1. Polymerase chain reaction system using magnetic beads for analyzing a sample that includes nucleic acid

    Science.gov (United States)

    Nasarabadi, Shanavaz [Livermore, CA

    2011-01-11

    A polymerase chain reaction system for analyzing a sample containing nucleic acid includes providing magnetic beads; providing a flow channel having a polymerase chain reaction chamber, a pre polymerase chain reaction magnet position adjacent the polymerase chain reaction chamber, and a post pre polymerase magnet position adjacent the polymerase chain reaction chamber. The nucleic acid is bound to the magnetic beads. The magnetic beads with the nucleic acid flow to the pre polymerase chain reaction magnet position in the flow channel. The magnetic beads and the nucleic acid are washed with ethanol. The nucleic acid in the polymerase chain reaction chamber is amplified. The magnetic beads and the nucleic acid are separated into a waste stream containing the magnetic beads and a post polymerase chain reaction mix containing the nucleic acid. The reaction mix containing the nucleic acid flows to an analysis unit in the channel for analysis.

  2. Designing of Holistic Mathematic Education Model Based-"System Among" at Low Grade Elementary School

    Science.gov (United States)

    Hayati, R.; Fauzan, A.; Iswari, M.; Khaidir, A.

    2018-04-01

    The purpose of this study was to develop a model of Holistic Mathematics Education (HME) among systems based on low-grade primary school students so that students have a solid foundation when entering a higher behavior. This type of research is desaign research developed by Plomp to have three stages, namely the preliminary research, development or prototyping phase, and assessement Phase. This research resulted in a model Holistic Mathematics Education (HME) -based system is among the primary school students low grade consists of 10 stages, namely 1) Recap through the neighborhood, 2) Discussion groups by exploiting the environment, 3) Demonstration Group, 4) Exercise individuals, 5) mathematical modeling, 6) Demonstration of individuals, 7) Reflections, 8) impressions and messages, and giving meaning, 9) Celebrations and 10) A thorough assessment. Furthermore, this model also produces 7 important components that should be developed teacher, namely 1) constructivism, 2) the nature of nature, 3) independence, 4) parable, 5) inquiry, 6) cooperation, and 7) strengthening. This model will produce a model in the form of books, student books and teacher's guide book as a support system that can help users in its application.

  3. Evaluation of novel scoring system named 5-5-5 exacerbation grading scale for allergic conjunctivitis disease.

    Science.gov (United States)

    Shoji, Jun; Inada, Noriko; Sawa, Mitsuru

    2009-12-01

    The objective of this study is to evaluate the practical usefulness of a scoring system using the 5-5-5 exacerbation grading scale for allergic conjunctivitis disease (ACD). Subjects were 103 patients with ACD including 40 patients with vernal keratoconjunctivitis (VKC), 20 patients with atopic keratoconjunctivitis (AKC), and 43 patients with allergic conjunctivitis (AC). The 5-5-5 exacerbation grading scale consists of the following 3 graded groups of clinical observations: the 100-point-grade group (100 points for each observation) includes active giant papillae, gelatinous infiltrates of the limbus, exfoliative epithelial keratopathy, shield ulcer and papillary proliferation at lower palpebral conjunctiva; the 10-point-grade group (10 points for each observation) includes blepharitis, papillary proliferation with velvety appearance, Horner-Trantas spots, edema of bulbal conjunctiva, and superficial punctate keratopathy; and the 1-point-grade group (1 point for each observation) includes papillae at upper palpebral conjunctiva, follicular lesion at lower palpebral conjunctiva, hyperemia of palpebral conjunctiva, hyperemia of bulbal conjunctiva, and lacrimal effusion. The total points in each grade group were determined as the severity score of the 5-5-5 exacerbation grading scale. The median severity scores of the 5-5-5 exacerbation grading scale in VKC, AKC and AC were 243 (range: 12-444), 32.5 (11-344), and 13 (2-33), respectively. The severity score of each ACD disease type was significantly different (P Kruskal-Wallis test). The severity of each type of ACD was classified as severe, moderate, or mild according to the severity score. The 5-5-5 exacerbation grading scale is a useful clinical tool for grading the severity of each type of ACD.

  4. Reaction diffusion in chromium-zircaloy-2 system

    International Nuclear Information System (INIS)

    Xiang Wenxin; Ying Shihao

    2001-01-01

    Reaction diffusion in the chromium-zircaloy-2 diffusion couples is investigated in the temperature range of 1023 - 1123 K. Scanning electron microscope (SEM) and energy dispersive spectrum (EDS) were used to measure the thickness of the reaction layer and to determine the Zr, Fe and Cr concentration penetrate profile in reaction layer, respectively. The growth kinetics of reaction layer has been studied and the results show that the growth of intermetallic compound is controlled by the process of volume diffusion as the layer growth approximately obeys the parabolic law. Interdiffusion coefficients were calculated using Boltzmann-Matano-Heumann model. Calculated interdiffusion coefficients were compared with those obtained on the condition that Cr dissolves in Zr and merely forms dilute solid solution. The comparison indicates that Cr diffuses in dilute solid solution is five orders of magnitude faster than in Zr(Fe, Cr) 2 intermetallic compound

  5. Tomato grading system using machine vision technology and neuro-fuzzy networks (ANFIS

    Directory of Open Access Journals (Sweden)

    H Izadi

    2016-04-01

    Full Text Available Introduction: The quality of agricultural products is associated with their color, size and health, grading of fruits is regarded as an important step in post-harvest processing. In most cases, manual sorting inspections depends on available manpower, time consuming and their accuracy could not be guaranteed. Machine Vision is known to be a useful tool for external features measurement (e.g. size, shape, color and defects and in recent century, Machine Vision technology has been used for shape sorting. The main purpose of this study was to develop new method for tomato grading and sorting using Neuro-fuzzy system (ANFIS and to compare the accuracies of the ANFIS predicted results with those suggested by a human expert. Materials and Methods: In this study, a total of 300 image of tomatoes (Rev ground was randomly harvested, classified in 3 ripeness stage, 3 sizes and 2 health. The grading and sorting mechanism consisted of a lighting chamber (cloudy sky, lighting source and a digital camera connected to a computer. The images were recorded in a special chamber with an indirect radiation (cloudy sky with four florescent lampson each sides and camera lens was entire to lighting chamber by a hole which was only entranced to outer and covered by a camera lens. Three types of features were extracted from final images; Shap, color and texture. To receive these features, we need to have images both in color and binary format in procedure shown in Figure 1. For the first group; characteristics of the images were analysis that could offer information an surface area (S.A., maximum diameter (Dmax, minimum diameter (Dmin and average diameters. Considering to the importance of the color in acceptance of food quality by consumers, the following classification was conducted to estimate the apparent color of the tomato; 1. Classified as red (red > 90% 2. Classified as red light (red or bold pink 60-90% 3. Classified as pink (red 30-60% 4. Classified as Turning

  6. Video image analysis as a potential grading system for Uruguayan beef carcasses.

    Science.gov (United States)

    Vote, D J; Bowling, M B; Cunha, B C N; Belk, K E; Tatum, J D; Montossi, F; Smith, G C

    2009-07-01

    A study was conducted in 2 phases to evaluate the effectiveness of 1) the VIAscan Beef Carcass System (BCSys; hot carcass system) and the CVS BeefCam (chilled carcass system), used independently or in combination, to predict Uruguayan beef carcass fabrication yields; and 2) the CVS BeefCam to segregate Uruguayan beef carcasses into groups that differ in the Warner-Bratzler shear force (WBSF) values of their LM steaks. The results from the meat yield phase of the present study indicated that the prediction of saleable meat yield percentages from Uruguayan beef carcasses by use of the BCSys or CVS BeefCam is similar to, or slightly better than, the use of USDA yield grade calculated to the nearest 0.1 and was much more effective than prediction based on Uruguay National Institute of Meat (INAC) grades. A further improvement in fabrication yield prediction could be obtained by use of a dual-component video image analysis (VIA) system. Whichever method of VIA prediction of fabrication yield is used, a single predicted value of fabrication yield for every carcass removes an impediment to the implementation of a value-based pricing system. Additionally, a VIA method of predicting carcass yield has the advantage over the current INAC classification system in that estimates would be produced by an instrument rather than by packing plant personnel, which would appeal to cattle producers. Results from the tenderness phase of the study indicated that the CVS BeefCam output variable for marbling was not (P > 0.05) able to segregate steer and heifer carcasses into groups that differed in WBSF values. In addition, the results of segregating steer and heifer carcasses according to muscle color output variables indicate that muscle maturity and skeletal maturity were useful for segregating carcasses according to differences in WBSF values of their steaks (P > 0.05). Use of VIA to predict beef carcass fabrication yields could improve accuracy and reduce subjectivity in comparison

  7. The entropy dissipation method for spatially inhomogeneous reaction-diffusion-type systems

    KAUST Repository

    Di Francesco, M.; Fellner, K.; Markowich, P. A

    2008-01-01

    and reaction terms and admit fewer conservation laws than the size of the system. In particular, we successfully apply the entropy approach to general linear systems and to a nonlinear example of a reaction-diffusion-convection system arising in solid

  8. Performance study on a low-temperature absorption–compression cascade refrigeration system driven by low-grade heat

    International Nuclear Information System (INIS)

    Xu, Yingjie; Chen, Guangming; Wang, Qin; Han, Xiaohong; Jiang, Ning; Deng, Shiming

    2016-01-01

    Highlights: • An absorption–compression system for low-temperature is developed and analyzed. • Cooling capacity, compression power, and discharge temperature are all improved. • At −170 °C, giving 200 W low-grade cooling capacity, COP increases by 28.6%. • Simulation results are verified experimentally, showing good agreement. - Abstract: This paper presents a performance study on a low-temperature absorption–compression cascade refrigeration system (LACRS), which consists of an absorption subsystem (AS) and a vapor compression auto-cascade subsystem (CS). In the system, low-grade heat of AS is used to subcool the CS, which can obtain cold energy at −170 °C. A simulation study is carried out to investigate the effects of evaporating temperature and low-grade cooling capacity on system performance. The study results show that as low-grade cooling capacity from the AS is provided to the CS, high-grade cooling capacity increases, compressor power consumption decreases, and the COP of the CS therefore increases. Comparing with compression auto-cascade cycle, the largest COP improvement of LACRS is about 38%. The model is verified by experimental data. An additional high-grade cooling capacity is obtained experimentally at −170 °C. The study results presented in this paper not only demonstrate the excellent performance of the LACRS, but also provide important guidance to further system design, and practical application.

  9. The significance of "geothermal microzonation" for the correct planning of low-grade source geothermal systems

    Science.gov (United States)

    Viccaro, Marco; Pezzino, Antonino; Belfiore, Giuseppe Maria; Campisano, Carlo

    2016-04-01

    Despite the environmental-friendly energy systems are solar thermal technologies, photovoltaic and wind power, other advantageous technologies exist, although they have not found wide development in countries such as Italy. Given the almost absent environmental impact and the rather favorable cost/benefit ratio, low-enthalpy geothermal systems are, however, likely to be of strategic importance also in Italy during the next years. The importance of geology for a sustainable exploitation of the ground through geothermal systems from low-grade sources is becoming paramount. Specifically, understanding of the lithological characteristics of the subsurface along with structures and textures of rocks is essential for a correct planning of the probe/geo-exchanger field and their associated ground source heat pumps. The complex geology of Eastern Sicily (Southern Italy), which includes volcanic, sedimentary and metamorphic units over limited extension, poses the question of how thermal conductivity of rocks is variable at the scale of restricted areas (even within the same municipality). This is the innovative concept of geothermal microzonation, i.e., how variable is the geothermal potential as a function of geology at the microscale. Some pilot areas have been therefore chosen to test how the geological features of the subsurface can influence the low-enthalpy geothermal potential of an area. Our geologically based evaluation and micro-zonation of the low-grade source geothermal potential of the selected areas have been verified to be fundamental for optimization of all the main components of a low-enthalpy geothermal system. Saving realization costs and limiting the energy consumption through correct sizing of the system are main ambitions to have sustainable development of this technology with intensive utilization of the subsurface. The variegated territory of countries such as Italy implies that these goals can be only reached if, primarily, the geological features

  10. Isotope exchange reaction in uranous-uranyl-sulphuric acid system

    International Nuclear Information System (INIS)

    Ling Daren; Yue Tingsheng; Mu Dehai; Wang Yani

    1990-01-01

    The kinetics of the isotope exchange reaction between U(IV) and U(VI) has been studied in low concentrations of sulphuric acid. A minimum exchange rate appears at 0.25 M H 2 SO 4 . From the rates at different temperatures ranging from 20deg to 35deg C, an apparent activation energy of 86 kcal/mole was calculated. The exchange rate was found to be accelerated by the addition of ferrous ions, and a half-life of less than 1 s, was obtained. Probable mechanisms for the acceleration of the uranium isotope exchange reactions by acidity and ferrous ions are proposed. (orig.)

  11. Food grade microemulsion systems: canola oil/lecithin:n-propanol/water.

    Science.gov (United States)

    Abbasi, Soleiman; Radi, Mohsen

    2016-03-01

    In this study, the capability of a natural surfactant, lecithin, and the influence of ionic strength, pH, and temperature on some properties of a food grade microemulsion system were evaluated. For this purpose, the pseudoternary phase diagrams of canola oil/lecithin:n-propanol/water microemulsions in the presence of different salts (NaCl and CaCl2), ionic strengths, pHs, and temperatures were constructed. Our findings showed that the presence of salts slightly increased the W/O areas on the phase diagrams, whereas pH variation was not effective on the microemulsion formation. The expansion of microemulsion areas with temperature indicated the greater triglycerides solubilization capacity of lecithin based microemulsions at higher temperatures. These findings revealed the efficiency of lecithin-based microemulsion system for solubilization of triglycerides which can potentially be used for extraction of edible vegetable oils particularly canola oil. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Seismic qualification of a commercial grade emergency diesel generator system in high seismic zones

    International Nuclear Information System (INIS)

    Khan, Mohsin R.; Chen, Wayne W.H.; Chu, Winnie S.

    2004-01-01

    The paper presents the seismic qualification of a commercially procured emergency diesel generator (EDG) system for use in a nuclear power plant. Response spectrum analyses of finite element models, validated using in situ vibration test data, were performed to qualify the skid and floor mounted mechanical components whose functional capacity and structural integrity can be analyzed. Time history analyses of these models were also performed to obtain the amplified response spectra for seismic testing of small valves, electrical and electro-mechanical components whose functional capacity can not be analyzed to establish the seismic qualification. The operational loads were obtained by in-plant vibration monitoring. Full scale shake table testing was performed for auxiliary electrical cabinets. It is concluded that with some minor structural modifications, a commercial grade EDG system can be qualified for safety-related applications in nuclear power plants located in high seismic zones. (author)

  13. Generic Model-Based Tailor-Made Design and Analysis of Biphasic Reaction Systems

    DEFF Research Database (Denmark)

    Anantpinijwatna, Amata

    systems have a broad range of application, such as the manufacture of petroleum based chemicals, pharmaceuticals, and agro-bio products. Major considerations in the design and analysis of biphasic reaction systems are physical and chemical equilibria, kinetic mechanisms, and reaction rates. The primary...... contribution of this thesis is the development of a systematic modelling framework for the biphasic reaction system. The developed framework consists of three modules describing phase equilibria, reactions and mass transfer, and material balances of such processes. Correlative and predictive thermodynamic......Biphasic reaction systems are composed of immiscible aqueous and organic liquid phases where reactants, products, and catalysts are partitioned. These biphasic conditions point to novel synthesis paths, higher yields, and faster reactions, as well as facilitate product separation. The biphasic...

  14. Chemical modeling of irreversible reactions in nuclear waste-water-rock systems

    International Nuclear Information System (INIS)

    Wolery, T.J.

    1981-02-01

    Chemical models of aqueous geochemical systems are usually built on the concept of thermodynamic equilibrium. Though many elementary reactions in a geochemical system may be close to equilibrium, others may not be. Chemical models of aqueous fluids should take into account that many aqueous redox reactions are among the latter. The behavior of redox reactions may critically affect migration of certain radionuclides, especially the actinides. In addition, the progress of reaction in geochemical systems requires thermodynamic driving forces associated with elementary reactions not at equilibrium, which are termed irreversible reactions. Both static chemical models of fluids and dynamic models of reacting systems have been applied to a wide spectrum of problems in water-rock interactions. Potential applications in nuclear waste disposal range from problems in geochemical aspects of site evaluation to those of waste-water-rock interactions. However, much further work in the laboratory and the field will be required to develop and verify such applications of chemical modeling

  15. Development of a utility system for charged particle nuclear reaction data by using intelligentPad

    International Nuclear Information System (INIS)

    Aoyama, Shigeyoshi; Ohbayashi, Yoshihide; Masui, Hiroshi; Kato, Kiyoshi; Chiba, Masaki

    2000-01-01

    We have developed a utility system, WinNRDF2, for a nuclear charged particle reaction data of NRDF (Nuclear Reaction Data File) on the IntelligentPad architecture. By using the system, we can search the experimental data of a charged particle reaction of NRDF. Furthermore, we also see the experimental data by using graphic pads which was made through the CONTIP project. (author)

  16. Systemic allergic reaction and diarrhoea after pineapple ingestion

    NARCIS (Netherlands)

    Kabir, I.; Speelman, P.; Islam, A.

    1993-01-01

    Some foods may initiate allergic reactions. Anaphylaxis due to mangoes, oranges, nuts and other foods has been reported earlier. We report the clinical and laboratory features of 32 patients who became symptomatic shortly after they had eaten pineapples. Seventeen patients were males and 15 females

  17. Multi-scale simulation of reaction-diffusion systems

    NARCIS (Netherlands)

    Vijaykumar, A.

    2017-01-01

    In many reaction-diffusion processes, ranging from biochemical networks, catalysis, to complex self-assembly, the spatial distribution of the reactants and the stochastic character of their interactions are crucial for the macroscopic behavior. The recently developed mesoscopic Green’s Function

  18. The incidence and features of systemic reactions to skin prick tests.

    Science.gov (United States)

    Sellaturay, Priya; Nasser, Shuaib; Ewan, Pamela

    2015-09-01

    Skin prick testing (SPT) has been regarded as a safe procedure with few systemic reactions. To evaluate the rate of systemic reactions and their associations after SPT in the largest population to date. In this study reactions were recorded prospectively in a specialist UK allergy clinic for 6 years (2007-2013). An estimated 31,000 patients underwent SPT. Twenty-four patients (age range 7 months to 56 years, mean 23.5 years, 17 female patients, 12 with asthma) had systemic reactions. The rate of systemic reactions to SPT was 0.077%. The likely allergens causing the reaction were foods (18; peanut, 7; walnut, 1; Brazil nut, 2; pistachio, 1; lupin, 1; cow's milk, 2; shrimp, 1; spinach, 1; legume, 1; soy, 1), aeroallergens (4; rabbit, 1; rat, 1; ragwort, 1; grass pollen, 1), wasp venom (1), and Tazocin (1). The causative SPT wheal was larger than 8 mm in 75%. The reaction to Tazocin was severe, with anaphylaxis occurring minutes after SPT. Reactions were treated immediately in the clinic and did not require further medical care. In this largest single-center study, the rate of systemic reactions after SPT was 77 per 100,000 patients. It is the first study to identify foods as a common and important cause (75%), with nuts posing the highest risk. This study reports the first systemic reaction to venom SPT and the first anaphylactic reaction after drug SPT. There was an association with a history of severe reactions and large skin test reaction. There are risks, albeit small, when undertaking SPT. Copyright © 2015 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

  19. Applying Hamming Code to Memory System of Safety Grade PLC (POSAFE-Q) Processor Module

    International Nuclear Information System (INIS)

    Kim, Taehee; Hwang, Sungjae; Park, Gangmin

    2013-01-01

    If some errors such as inverted bits occur in the memory, instructions and data will be corrupted. As a result, the PLC may execute the wrong instructions or refer to the wrong data. Hamming Code can be considered as the solution for mitigating this mis operation. In this paper, we apply hamming Code, then, we inspect whether hamming code is suitable for to the memory system of the processor module. In this paper, we applied hamming code to existing safety grade PLC (POSAFE-Q). Inspection data are collected and they will be referred for improving the PLC in terms of the soundness. In our future work, we will try to improve time delay caused by hamming calculation. It will include CPLD optimization and memory architecture or parts alteration. In addition to these hamming code-based works, we will explore any methodologies such as mirroring for the soundness of safety grade PLC. Hamming code-based works can correct bit errors, but they have limitation in multi bits errors

  20. Applying Hamming Code to Memory System of Safety Grade PLC (POSAFE-Q) Processor Module

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Taehee; Hwang, Sungjae; Park, Gangmin [POSCO Nuclear Technology, Seoul (Korea, Republic of)

    2013-05-15

    If some errors such as inverted bits occur in the memory, instructions and data will be corrupted. As a result, the PLC may execute the wrong instructions or refer to the wrong data. Hamming Code can be considered as the solution for mitigating this mis operation. In this paper, we apply hamming Code, then, we inspect whether hamming code is suitable for to the memory system of the processor module. In this paper, we applied hamming code to existing safety grade PLC (POSAFE-Q). Inspection data are collected and they will be referred for improving the PLC in terms of the soundness. In our future work, we will try to improve time delay caused by hamming calculation. It will include CPLD optimization and memory architecture or parts alteration. In addition to these hamming code-based works, we will explore any methodologies such as mirroring for the soundness of safety grade PLC. Hamming code-based works can correct bit errors, but they have limitation in multi bits errors.

  1. Application of a uniform anatomic grading system to measure disease severity in eight emergency general surgical illnesses.

    Science.gov (United States)

    Crandall, Marie L; Agarwal, Suresh; Muskat, Peter; Ross, Steven; Savage, Stephanie; Schuster, Kevin; Tominaga, Gail T; Shafi, Shahid

    2014-11-01

    Emergent general surgical diseases encompass a broad spectrum of anatomy and pathophysiology, creating challenges for outcomes assessment, research, and surgical training. The goal of this study was to measure anatomic disease severity for eight emergent general surgical diseases using the uniform grading system of the American Association for the Surgery of Trauma (AAST). The Committee on Patient Assessment and Outcomes of AAST applied the previously developed uniform grading system to eight emergent general surgical diseases using a consensus of experts. It was then reviewed and approved by the Board of Managers of AAST. Severity grades for eight commonly encountered emergent general surgical conditions were created: breast abscess, esophageal perforation, infectious colitis, pelvic inflammatory disease, perirectal abscess, pleural space infections, soft tissue infections, and surgical site infections. The range of grades from I through V, reflect progression from mild disease, limited to within the organ itself, to widespread severe disease. This article provides a uniform grading system for measuring anatomic severity of eight emergent general surgical diseases. Consistent adoption of these grades could improve standardization for quality assurance, outcomes research, and surgical training.

  2. Fatty degeneration of the rotator cuff muscles on pre- and postoperative CT arthrography (CTA): is the Goutallier grading system reliable?

    International Nuclear Information System (INIS)

    Lee, Eugene; Choi, Jung-Ah; Kang, Heung Sik; Oh, Joo Han; Ahn, Soyeon; Hong, Sung Hwan; Chai, Jee Won

    2013-01-01

    To retrospectively evaluate fatty degeneration (FD) of rotator cuff muscles on CTA using Goutallier's grading system and quantitative measurements with comparison between pre- and postoperative states. IRB approval was obtained for this study. Two radiologists independently reviewed pre- and postoperative CTAs of 43 patients (24 males and 19 females, mean age, 58.1 years) with 46 shoulders confirmed as full-thickness tears with random distribution. FD of supraspinatus, infraspinatus/teres minor, and subscapularis was assessed using Goutallier's system and by quantitative measurements of Hounsfield units (HUs) on sagittal images. Changes in FD grades and HUs were compared between pre- and postoperative CTAs and analyzed with respect to preoperative tear size and postoperative cuff integrity. The correlations between qualitative grades and quantitative measurements and their inter-observer reliabilities were also assessed. There was statistically significant correlation between FD grades and HU measurements of all muscles on pre- and postoperative CTA (p 0.05). The average dose-length product (DLP, mGy . cm) was 365.2 mGy . cm (range, 323.8-417.2 mGy . cm) and estimated average effective dose was 5.1 mSv. Goutallier grades correlated well with HUs of rotator cuff muscles. Reliability was excellent for both systems, except for FD grade of IST/TM muscles, which may be more reliably assessed using quantitative measurements. (orig.)

  3. Monoacylglycerol synthesis via enzymatic glycerolysis using a simple and efficient reaction system

    DEFF Research Database (Denmark)

    Yang, Tiankui; MORTEN, REBSDORF; ULRIK, ENGELRUD

    2005-01-01

    TL IM and Novozym 435 were employed in a batch reaction system. Novozym 435 showed better properties in glycerolysis. The increased temperature and high glycerol/oil ratio had little effect on the yield of MAGs in such a system. The reaction in a packed bed reactor (PBR) gave lower yield of MAGs...

  4. Estimation and prediction of convection-diffusion-reaction systems from point measurement

    NARCIS (Netherlands)

    Vries, D.

    2008-01-01

    Different procedures with respect to estimation and prediction of systems characterized by convection, diffusion and reactions on the basis of point measurement data, have been studied. Two applications of these convection-diffusion-reaction (CDR) systems have been used as a case study of the

  5. Systemic low-grade inflammation in post-traumatic stress disorder: a systematic review

    Directory of Open Access Journals (Sweden)

    Speer K

    2018-03-01

    Full Text Available Kathryn Speer,1 Dominic Upton,2 Stuart Semple,1,3 Andrew McKune1–4 1Discipline of Sport and Exercise Science, Faculty of Health, University of Canberra, Canberra, ACT, Australia; 2Faculty of Health, University of Canberra, Canberra, ACT, Australia; 3Research Institute for Sport and Exercise, University of Canberra, Canberra, ACT, Australia; 4Discipline of Biokinetics, Exercise and Leisure Sciences, School of Health Sciences, University of KwaZulu Natal, Durban, South Africa Abstract: Studies examining post-traumatic stress disorder (PTSD have either emphasized a relationship between PTSD and a systemically pro-inflammatory state or identified a link between PTSD and chronic disease. The aim of this study was to evaluate the evidence for a relationship between individuals with PTSD and systemic low-grade inflammation that has been proposed to underlie chronic disease development in this population. The authors conducted a systematic review of the literature (January 2006 to April 2017 in accordance with the PRISMA statement in the following four databases: PubMed, MEDLINE, PsycINFO, and SPORTDiscus with Full Text. The search strategy was limited to articles published in peer-reviewed journals and to human studies. Nine studies measuring systemic inflammation and discussing its role in chronic disease development were selected for inclusion in this review. The association between markers of systemic inflammation and PTSD was evaluated by the measurement of a variety of systemic inflammatory markers including acute-phase proteins, complement proteins, pro- and anti-inflammatory cytokines, natural killer cells, and white blood cells. In general, systemic inflammatory biomarkers were elevated across the studies in the PTSD groups. There is evidence that PTSD is underpinned by the presence of a systemic low-grade inflammatory state. This inflammation may be the mechanism associated with increased risk for chronic disease in the PTSD population. From

  6. Distributed order reaction-diffusion systems associated with Caputo derivatives

    Science.gov (United States)

    Saxena, R. K.; Mathai, A. M.; Haubold, H. J.

    2014-08-01

    This paper deals with the investigation of the solution of an unified fractional reaction-diffusion equation of distributed order associated with the Caputo derivatives as the time-derivative and Riesz-Feller fractional derivative as the space-derivative. The solution is derived by the application of the joint Laplace and Fourier transforms in compact and closed form in terms of the H-function. The results derived are of general nature and include the results investigated earlier by other authors, notably by Mainardi et al. ["The fundamental solution of the space-time fractional diffusion equation," Fractional Calculus Appl. Anal. 4, 153-202 (2001); Mainardi et al. "Fox H-functions in fractional diffusion," J. Comput. Appl. Math. 178, 321-331 (2005)] for the fundamental solution of the space-time fractional equation, including Haubold et al. ["Solutions of reaction-diffusion equations in terms of the H-function," Bull. Astron. Soc. India 35, 681-689 (2007)] and Saxena et al. ["Fractional reaction-diffusion equations," Astrophys. Space Sci. 305, 289-296 (2006a)] for fractional reaction-diffusion equations. The advantage of using the Riesz-Feller derivative lies in the fact that the solution of the fractional reaction-diffusion equation, containing this derivative, includes the fundamental solution for space-time fractional diffusion, which itself is a generalization of fractional diffusion, space-time fraction diffusion, and time-fractional diffusion, see Schneider and Wyss ["Fractional diffusion and wave equations," J. Math. Phys. 30, 134-144 (1989)]. These specialized types of diffusion can be interpreted as spatial probability density functions evolving in time and are expressible in terms of the H-function in compact forms. The convergence conditions for the double series occurring in the solutions are investigated. It is interesting to observe that the double series comes out to be a special case of the Srivastava-Daoust hypergeometric function of two variables

  7. Stochastic modeling and simulation of reaction-diffusion system with Hill function dynamics.

    Science.gov (United States)

    Chen, Minghan; Li, Fei; Wang, Shuo; Cao, Young

    2017-03-14

    Stochastic simulation of reaction-diffusion systems presents great challenges for spatiotemporal biological modeling and simulation. One widely used framework for stochastic simulation of reaction-diffusion systems is reaction diffusion master equation (RDME). Previous studies have discovered that for the RDME, when discretization size approaches zero, reaction time for bimolecular reactions in high dimensional domains tends to infinity. In this paper, we demonstrate that in the 1D domain, highly nonlinear reaction dynamics given by Hill function may also have dramatic change when discretization size is smaller than a critical value. Moreover, we discuss methods to avoid this problem: smoothing over space, fixed length smoothing over space and a hybrid method. Our analysis reveals that the switch-like Hill dynamics reduces to a linear function of discretization size when the discretization size is small enough. The three proposed methods could correctly (under certain precision) simulate Hill function dynamics in the microscopic RDME system.

  8. Capability of LEP-type surfaces to describe noncollinear reactions 2 - Polyatomic systems

    CERN Document Server

    Espinosa-Garcia, Joaquin

    2001-01-01

    In this second article of the series, the popular LEP-type surface for collinear reaction paths and a "bent" surface, which involves a saddle point geometry with a nonlinear central angle, were used to examine the capacity of LEP-type surfaces to describe the kinetics and dynamics of noncollinear reaction paths in polyatomic systems. Analyzing the geometries, vibrational frequencies, curvature along the reaction path (to estimate the tunneling effect and the reaction coordinate-bound modes coupling), and the variational transition- state theory thermal rate constants for the NH//3 + O(**3P) reaction, we found that the "collinear" LEP-type and the "bent" surfaces for this polyatomic system show similar behavior, thus allowing a considerable saving in time and computational effort. This agreement is especially encouraging for this polyatomic system because in the Cs symmetry the reaction proceeds via two electronic states of symmetries **3A prime and **3A double prime , which had to be independently calibrated....

  9. Upgrading and downgrading of prostate cancer from biopsy to radical prostatectomy: incidence and predictive factors using the modified Gleason grading system and factoring in tertiary grades.

    Science.gov (United States)

    Epstein, Jonathan I; Feng, Zhaoyong; Trock, Bruce J; Pierorazio, Phillip M

    2012-05-01

    Prior studies assessing the correlation of Gleason score (GS) at needle biopsy and corresponding radical prostatectomy (RP) predated the use of the modified Gleason scoring system and did not factor in tertiary grade patterns. To assess the relation of biopsy and RP grade in the largest study to date. A total of 7643 totally embedded RP and corresponding needle biopsies (2004-2010) were analyzed according to the updated Gleason system. All patients underwent prostate biopsy prior to RP. The relation of upgrading or downgrading to patient and cancer characteristics was compared using the chi-square test, Student t test, and multivariable logistic regression. A total of 36.3% of cases were upgraded from a needle biopsy GS 5-6 to a higher grade at RP (11.2% with GS 6 plus tertiary). Half of the cases had matching GS 3+4=7 at biopsy and RP with an approximately equal number of cases downgraded and upgraded at RP. With biopsy GS 4+3=7, RP GS was almost equally 3+4=7 and 4+3=7. Biopsy GS 8 led to an almost equal distribution between RP GS 4+3=7, 8, and 9-10. A total of 58% of the cases had matching GS 9-10 at biopsy and RP. In multivariable analysis, increasing age (pfactoring in multiple variables including the number of positive cores and the maximum percentage of cancer per core, the concordance indexes were not sufficiently high to justify the use of nomograms for predicting upgrading and downgrading for the individual patient. Almost 20% of RP cases have tertiary patterns. A needle biopsy can sample a tertiary higher Gleason pattern in the RP, which is then not recorded in the standard GS reporting, resulting in an apparent overgrading on the needle biopsy. Copyright © 2012 European Association of Urology. Published by Elsevier B.V. All rights reserved.

  10. Establishment of quality system program for the manufacture of nuclear grade steels

    International Nuclear Information System (INIS)

    Saito, Toru

    1978-01-01

    Recently, the pressure vessels employed in the fields of nuclear power generation, petroleum refining, and chemical industry tend to be large size and high performance, therefore thick steel plates and forgings of high quality are demanded, and the establishment and maintenance of strict quality assurance system for material production are required. In Mizushima Works, Kawasaki Steel Corp., the installations for large forgings and thick plates were constructed from 1969 to 1976, and the researches on the development of production techniques were forwarded in parallel. A Quality System Certificate (Material) has been granted to Mizushima Works on March 11, 1977, by the American Society of Mechanical Engineers for the manufacture of steel plates and forgings of nuclear grade. The quality system manual as the basis of quality assurance activities, the organization for quality assurance, its responsibility and authority, the discrimination of materials, the control of manufacturing processes, the qualification of workers in charge of nondestructive test, welding, heat treatment and others, the management of tests and inspections, the management of products with faults and repairing measures, and internal supervisory system are explained. The wide use of computers is novel in the field of quality system program. (Kako, I.)

  11. Destruction of polyphasic systems in supercritical water reaction media

    International Nuclear Information System (INIS)

    Leybros, A.

    2009-12-01

    Spent ion exchange resins (IER) are, hence, radioactive process wastes for which there is no satisfactory industrial treatment. Supercritical water oxidation offers a viable alternative treatment to destroy the organic structure of resins by using supercritical water properties. The reactor used in Supercritical Fluids and Membranes Laboratory is a double shell stirred reactor. Total Organic Carbon reduction rates higher than 99% were obtained thanks to POSCEA2 experimental set-up when using a co-fuel, isopropyl alcohol. Influence of operating parameters was studied. A detailed reactional mechanism for cationic and anionic resins is created. For the solubilization of the particles in supercritical water, a mechanism has been created with the identified rate determining species and implemented into Fluent software through the EDC approach. Experimental temperature profiles are well represented by EDC model. Reaction rates are hence controlled by the chemical species mixing. (author)

  12. EXFOR Systems Manual Nuclear reaction Data Exchange Format

    International Nuclear Information System (INIS)

    McLane, V.

    2000-01-01

    EXFOR is an exchange format designed to allow transmission of nuclear reaction data between the members of the Nuclear Data Centers Network. This document has been written for use by the members of the Network and includes matters of procedure and protocol, as well as detailed rules for the compilation of data. Users may prefer to consult EXFOR Basics' for a brief description of the format

  13. EXFOR SYSTEMS MANUAL NUCLEAR REACTION DATA EXCHANGE FORMAT.

    Energy Technology Data Exchange (ETDEWEB)

    MCLANE,V.; NUCLEAR DATA CENTER NETWORK

    2000-05-19

    EXFOR is an exchange format designed to allow transmission of nuclear reaction data between the members of the Nuclear Data Centers Network. This document has been written for use by the members of the Network and includes matters of procedure and protocol, as well as detailed rules for the compilation of data. Users may prefer to consult EXFOR Basics' for a brief description of the format.

  14. Nonequilibrium Contribution to the Rate of Reaction. III. Isothermal Multicomponent Systems

    Science.gov (United States)

    Shizgal, B.; Karplus, M.

    1970-10-01

    The nonequilibrium contribution to the reaction rate of an isothermal multicomponent system is obtained by solution of the appropriate Chapman-Enskog equation; the system is composed of reactive species in contact with a heat bath of inert atoms M.

  15. Revised definition of neuropathic pain and its grading system: an open case series illustrating its use in clinical practice.

    Science.gov (United States)

    Geber, Christian; Baumgärtner, Ulf; Schwab, Rainer; Müller, Harald; Stoeter, Peter; Dieterich, Marianne; Sommer, Clemens; Birklein, Frank; Treede, Rolf-Detlef

    2009-10-01

    The definition of neuropathic pain has recently been revised by an expert committee of the Neuropathic Pain Special Interest Group of the International Association for the Study of Pain (NeuPSIG) as "pain arising as direct consequence of a lesion or disease affecting the somatosensory system," and a grading system of "definite," "probable," and "possible" neuropathic pain has been introduced. This open case series of 5 outpatients (3 men, 2 women; mean age 48 +/- 12 years) demonstrates how the grading system can be applied, in combination with appropriate confirmatory testing, to diagnosis neuropathic conditions in clinical practice. The proposed grading system includes a dynamic algorithm that enhances the physician's ability to determine with a greater level of certainty whether a pain condition is neuropathic. Its clinical use should be further validated in prospective studies.

  16. A DHT Key-Value Storage System with Carrier Grade Performance

    Science.gov (United States)

    Shi, Guangyu; Chen, Jian; Gong, Hao; Fan, Lingyuan; Xue, Haiqiang; Lu, Qingming; Liang, Liang

    The Peer-to-Peer (P2P) technology being widely adopted in today’s both academic research and practical service providing, has many potential advantages and achieves a great success in Information Technology scope. Recently some researchers have proposed that P2P inspired architecture also might be one choice for the telecom network evolution. Most of such works adopted structured P2P (DHT) as the basic solutions, but they seldom discussed how to eliminate the huge gap between the telecom underlay performance requirement and the performance of existed DHT which mainly originated from the Internet applications. This paper presents the design and implementation of SandStone, a DHT based key-value storage system with carrier grade performance, such as good scalability, strong consistency and high reliability, which could be deployed as the cornerstone in such new P2P inspired networking architectures.

  17. [Study of the Application of Mobile Medical Technology in Construction of Grading Diagnosis and Treatment System].

    Science.gov (United States)

    Zhu, Wenwu; Shen, Yihong; Zhen, Hui; Yang, Xiaohe; Hu, Kai

    2018-02-08

    The combination of mobile medical technology and the grading diagnosis and treatment system (GDTS) can stimulate the allocation of medical resources, reduce medical cost and improve public health significantly. Firstly we summarize development features of mobile medical technology in foreign and domestic market, then we study the application model of mobile medical application in GDTS with field research data and analyzes its advantage and shortage. Finally, we propose four measures for further developing mobile medical application in the GDTS:the government departments should formulate policies and industry standards of products as soon as possible to meet requirement of market; service providers should take the hospitals as core role to achieve mutual benefit and win-win situation; take the daily monitoring of chronic diseases as an entry point to build profitable business model; enhance publicity to promote public health awareness.

  18. Low grade heat driven adsorption system for cooling and power generation using advanced adsorbent materials

    International Nuclear Information System (INIS)

    Al-Mousawi, Fadhel Noraldeen; Al-Dadah, Raya; Mahmoud, Saad

    2016-01-01

    Highlights: • Adsorption system based on water and advanced physical adsorbents has the potential of producing cooling and power. • Adding an expander to physisorption system enhances efficiency by up to 11%. • MIL101Cr MOF can produce 95 W/kg and 1357 W/kg of specific power and cooling. • AQSOA Z02 can produce 73 W/kg and 640 W/kg of specific power and cooling. - Abstract: Globally there is abundance of low grade heat sources (around 150 °C) from renewables like solar energy or from industrial waste heat. The exploitation of such low grade heat sources will reduce fossil fuel consumption and CO_2 emissions. Adsorption technology offers the potential of using such low grade heat to generate cooling and power. In this work, the effect of using advanced adsorbent materials like AQSOA-Z02 (SAPO-34) zeolite and MIL101Cr Metal Organic Framework (MOF) at various operating conditions on power and cooling performance compared to that of commonly used silica-gel was investigated using water as refrigerant. A mathematical model for a two bed adsorption cooling cycle has been developed with the cycle modified to produce power by incorporating an expander between the desorber and the condenser. Results show that it is possible to produce power and cooling at the same time without affecting the cooling output. Results also show that for all adsorbents used as the heat source temperature increases, the cooling effect and power generated increase. As for increasing the cold bed temperature, this will decrease the cooling effect and power output except for SAPO-34 which shows slightly increasing trend of cooling and power output. As the condenser cooling temperature increases, the cooling effect and power output will decrease while for the chilled water temperature, the cooling load and power generated increased as the temperature increased. The maximum values of average specific power generation (SP), specific cooling power (SCP) and cycle efficiency are 73 W

  19. Fabrication of a pen-shaped portable biochemical reaction system based on magnetic bead manipulation

    International Nuclear Information System (INIS)

    Shikida, Mitsuhiro; Inagaki, Noriyuki; Okochi, Mina; Honda, Hiroyuki; Sato, Kazuo

    2011-01-01

    A pen-shaped platform that is similar to a mechanical pencil is proposed for producing a portable reaction system. A reaction unit, as the key component in the system, was produced by using a heat shrinkable tube. A mechanical pencil supplied by Mitsubishi Pencil Co. Ltd was used as the pen-shaped platform for driving the reaction cylinder. It was actuated using an inchworm motion. We confirmed that the magnetic beads were successfully manipulated in the droplet in the cylinder-shaped reaction units. (technical note)

  20. Comparative evaluation of the modified Scarff-Bloom-Richardson grading system on breast carcinoma aspirates and histopathology

    Directory of Open Access Journals (Sweden)

    Cherry Bansal

    2012-01-01

    Full Text Available Background: Fine needle aspiration (FNA is a quick, minimally invasive procedure for evaluation of breast tumors. The Scarff-Bloom-Richardson (SBR grade on histological sections is a well-established tool to guide selection of adjuvant systemic therapy. Grade evaluation is possible on cytology smears to avoid and minimize the morbidity associated with overtreatment of lower grade tumors. Aim : The aim was to test the hypothesis whether breast FNA from the peripheral portion of the lesion is representative of Scarff-Bloom-Richardson grade on histopathology as compared to FNA from the central portion. Materials and Methods : Fine-needle aspirates and subsequent tissue specimens from 45 women with ductal carcinoma (not otherwise specified were studied. FNAs were performed under ultrasound guidance from the central as well as the peripheral third of the lesion for each case avoiding areas of necrosis/calcification. The SBR grading was compared on alcohol fixed aspirates and tissue sections for each case. Results : Comparative analysis of SBR grade on aspirates from the peripheral portion and histopathology by the Pearson chi-square test (χ2 =78.00 showed that it was statistically significant (P<0.001 with 93% concordance. Lower mitotic score on aspirates from the peripheral portion was observed in only 4 out of 45 (9% cases. The results of the Pearson chi-square test (χ2 = 75.824 with statistically significant (P=0.000. Conclusion : This prospective study shows that FNA smears from the peripheral portion of the lesion are representative of the grading performed on the corresponding histopathological sections. It is possible to score and grade by SBR system on FNA smears.

  1. Configuration of a pulse radiolysis system for the study of gas-phase reactions and kinetic investigations of the reactions of hydroxyl radicals with methyl and ethyl radicals

    International Nuclear Information System (INIS)

    Fagerstroem, K.

    1993-01-01

    The work that is presented in this thesis deals with the assembling and testing of a pulse radiolysis system for kinetic studies of gas-phase reactions as well as with the kinetics of the gas-phase reactions of hydroxyl radicals with methyl and ethyl radicals. These radicals are very important as these are formed at an early stage in hydrocarbon combustion processes. The two studied reactions are key reactions in those processes. (6 refs., 4 figs., 2 tabs.)

  2. Role of the immune system in the peritoneal tumor spread of high grade serous ovarian cancer.

    Science.gov (United States)

    Auer, Katharina; Bachmayr-Heyda, Anna; Sukhbaatar, Nyamdelger; Aust, Stefanie; Schmetterer, Klaus G; Meier, Samuel M; Gerner, Christopher; Grimm, Christoph; Horvat, Reinhard; Pils, Dietmar

    2016-09-20

    The immune system plays a critical role in cancer progression and overall survival. Still, it is unclear if differences in the immune response are associated with different patterns of tumor spread apparent in high grade serous ovarian cancer patients and previously described by us. In this study we aimed to assess the role of the immune system in miliary (widespread, millet-sized lesions) and non-miliary (bigger, exophytically growing implants) tumor spread. To achieve this we comprehensively analyzed tumor tissues, blood, and ascites from 41 patients using immunofluorescence, flow cytometry, RNA sequencing, multiplexed immunoassays, and immunohistochemistry. Results showed that inflammation markers were systemically higher in miliary. In contrast, in non-miliary lymphocyte and monocyte/macrophage infiltration into the ascites was higher as well as the levels of PD-1 expression in tumor associated cytotoxic T-lymphocytes and PD-L1 expression in tumor cells. Furthermore, in ascites of miliary patients more epithelial tumor cells were present compared to non-miliary, possibly due to the active down-regulation of anti-tumor responses by B-cells and regulatory T-cells. Summarizing, adaptive immune responses prevailed in patients with non-miliary spread, whereas in patients with miliary spread a higher involvement of the innate immune system was apparent while adaptive responses were counteracted by immune suppressive cells and factors.

  3. An Airborne Multispectral Imaging System Based on Two Consumer-Grade Cameras for Agricultural Remote Sensing

    Directory of Open Access Journals (Sweden)

    Chenghai Yang

    2014-06-01

    Full Text Available This paper describes the design and evaluation of an airborne multispectral imaging system based on two identical consumer-grade cameras for agricultural remote sensing. The cameras are equipped with a full-frame complementary metal oxide semiconductor (CMOS sensor with 5616 × 3744 pixels. One camera captures normal color images, while the other is modified to obtain near-infrared (NIR images. The color camera is also equipped with a GPS receiver to allow geotagged images. A remote control is used to trigger both cameras simultaneously. Images are stored in 14-bit RAW and 8-bit JPEG files in CompactFlash cards. The second-order transformation was used to align the color and NIR images to achieve subpixel alignment in four-band images. The imaging system was tested under various flight and land cover conditions and optimal camera settings were determined for airborne image acquisition. Images were captured at altitudes of 305–3050 m (1000–10,000 ft and pixel sizes of 0.1–1.0 m were achieved. Four practical application examples are presented to illustrate how the imaging system was used to estimate cotton canopy cover, detect cotton root rot, and map henbit and giant reed infestations. Preliminary analysis of example images has shown that this system has potential for crop condition assessment, pest detection, and other agricultural applications.

  4. Grading-System-Dependent Volume Effects for Late Radiation-Induced Rectal Toxicity After Curative Radiotherapy for Prostate Cancer

    International Nuclear Information System (INIS)

    Laan, Hans Paul van der; Bergh, Alphons van den; Schilstra, Cornelis; Vlasman, Renske; Meertens, Harm; Langendijk, Johannes A.

    2008-01-01

    Purpose: To assess the association between the dose distributions in the rectum and late Radiation Therapy Oncology Group and the European Organisation for Research and Treatment of Cancer (RTOG/EORTC), Late Effects of Normal Tissue SOMA, and Common Terminology Criteria for Adverse Events (CTCAE) version 3.0 graded rectal toxicity among patients with prostate cancer treated with RT. Methods and Materials: Included in the study were 124 patients who received three-dimensional conformal RT for prostate cancer to a total dose of 70 Gy in 2-Gy fractions. All patients completed questionnaires regarding rectum complaints before RT and during long-term follow-up. Late rectum Grade 2 or worse toxicity, according to RTOG/EORTC, LENT SOMA, and CTCAE v3.0 criteria, was analyzed in relation to rectal dose and volume parameters. Results: Dose-volume thresholds (V40 ≥65%, V50 ≥55%, V65 ≥45%, V70 ≥20%, and a rectum volume ≤140 cm 3 ), significantly discriminated patients with late Grade 0-1 and Grade 2 or worse rectal toxicity, particularly using the LENT SOMA and CTCAE v3.0 systems. The rectum volume receiving ≥70 Gy (V70) was most predictive for late Grade 2 or worse rectal toxicity with each of the grading systems. The associations were strongest, however, with use of the LENT SOMA system. Conclusions: Volume effects for late radiation-induced rectal toxicity are present, but their clinical significance depends on the grading system used. This should be taken into account in the interpretation of studies reporting on radiation-induced rectal toxicity

  5. Computer aided design, analysis and experimental investigation of membrane assisted batch reaction-separation systems

    DEFF Research Database (Denmark)

    Mitkowski, Piotr Tomasz; Buchaly, Carsten; Kreis, Peter

    2009-01-01

    Membrane assisted batch reaction operation offers an interesting option for equilibrium limited reaction systems in chemical and biochemical manufacturing by selective removal of one of the products and thereby increasing the product yield. The design of such hybrid systems need to take into acco......Membrane assisted batch reaction operation offers an interesting option for equilibrium limited reaction systems in chemical and biochemical manufacturing by selective removal of one of the products and thereby increasing the product yield. The design of such hybrid systems need to take...... into account the performance of each constituent element and the optimisation of the design must take into consideration their interdependency. In this paper use of a membrane, to assist in the synthesis of propyl-propionate is investigated through the use of a hybrid process design framework, which consists...... and separation functionalities and to design/analyse the hybrid scheme. The generated hybrid scheme has been validated through experiments involving an esterification reaction....

  6. The role of low-grade inflammation and metabolic flexibility in aging and nutritional modulation thereof: A systems biology approach

    NARCIS (Netherlands)

    Calçada, D.; Vianello, D.; Giampieri, E.; Sala, C.; Castellani, G.; Graaf, A.A. de; Kremer, S.H.A.; Ommen, B. van; Feskens, E.; Santoro, A.; Franceschi, C.; Bouwman, J.

    2014-01-01

    Aging is a biological process characterized by the progressive functional decline of many interrelated physiological systems. In particular, aging is associated with the development of a systemic state of low-grade chronic inflammation (inflammaging), and with progressive deterioration of metabolic

  7. Pneumatic tool torque reaction: reaction forces, displacement, muscle activity and discomfort in the hand-arm system.

    Science.gov (United States)

    Kihlberg, S; Kjellberg, A; Lindbeck, L

    1993-06-01

    Reaction forces, hand-arm displacement, muscle activity and discomfort ratings were studied during the securing of threaded fasteners with three angle nutrunners with different shut-off mechanisms, but with the same spindle torque (72-74 Nm). The three tools were tested according to the method specified in ISO 6544. One of the tools had an almost instantaneous shut-off. Another had a more slowly declining torque curve. For the third tool the maximum torque was maintained for a while before shut-off. Twelve male subjects participated in the study. A force platform measured the reaction force between the subject and the floor. The option of the hand-arm system and the shoulder was measured with an optoelectronic measuring system. The muscle activity (EMG) in six muscles in the arm and shoulder was measured with surface electrodes. Significant differences in the arm movements and ground reaction forces were found between the three tools. The smallest values were found with the fast shut-off tool while the delayed shut-off tool caused the largest values. The EMG measures gave inconsistent response patterns. Discomfort ratings were highly correlated with the time for which the tool torque exceeded 90% of peak preset torque, but the time for which the tool torque exceeded 90% of peak calculated by the method specified in ISO 6544. Nutrunners with a shut-off mechanism that causes a slowly decreasing torque or a torque that is maintained for a while before shut-off should be avoided. If no substitutes are available, then a torque reaction bar should be mounted on the tool.

  8. Test of the Center for Automated Processing of Hardwoods' Auto-Image Detection and Computer-Based Grading and Cutup System

    Science.gov (United States)

    Philip A. Araman; Janice K. Wiedenbeck

    1995-01-01

    Automated lumber grading and yield optimization using computer controlled saws will be plausible for hardwoods if and when lumber scanning systems can reliably identify all defects by type. Existing computer programs could then be used to grade the lumber, identify the best cut-up solution, and control the sawing machines. The potential value of a scanning grading...

  9. Prevalence of systemic co-morbidities in patients with various grades of diabetic retinopathy

    Directory of Open Access Journals (Sweden)

    Pradeep Venkatesh

    2014-01-01

    Full Text Available Background & objectives : Though diabetes affects multiple organs, most studies highlight the occurence of only one complication in isolation. We conducted a hospital-based study to estimate the co-existence of significant systemic co-morbid conditions in patients with varying grades of diabetic retinopathy. Methods : A total of 170 consecutive patients with diabetic retinopathy were prospectively recruited for the study between June 2009 to June 2010 at a tertiary care eye centre in north India. Retinopathy was graded by fundus biomicroscopy and fundus photography and classified into three categories (mild-moderate nonproliferative retinopathy, proliferative retinopathy requiring only laser and proliferative retinopathy requiring surgery. Nephropathy was classified by calculating the six variable estimated glomerular filtration rate (eGFR for all patients. Nerve conduction studies and clinical assessment were used to determine presence of neuropathy. Co-existence of macrovascular disease and peripheral vascular disease was also ascertained. Results : The percentages of patients with overt nephropathy in the three groups were 19.2, 38.0 and 41.2, respectively. Significant linear trends were observed for serum creatinine (P=0.004, albumin (P=0.017 and eGFR (P=0.030. A higher per cent had abnormal nerve conduction on electrophysiology than that diagnosed clinically (65.4 vs. 44.2, 76.0 vs. 40.0 and 64.8 vs. 48.6, respectively. The odds ratio (95% CI for co-existence of nephropathy, neuropathy, CVA (cerebrovascular accidents and PVD (peripheral vascular disease was 2.9, 0.9, 4.8 and 3.5, respectively. Independent of retinopathy severity, patients with clinically significant macular oedema (CSME had a higher percentage of nephropathy ( p0 < 0.005. Interpretation & conclusions : The co-existence of overt nephropathy, nerve conduction based neuropathy and macrovascular co-morbidity in patients with early grades of diabetic retinopathy was significant

  10. Performance evaluation of nuclear grade filters for the Trupact-I pressure equalization system

    International Nuclear Information System (INIS)

    Sandoval, R.P.; Joseph, B.J.

    1987-01-01

    The performance of high-efficiency-particulate-air and ultra-low- penetration-air filters subjected to extreme environments of temperature, shock, pressure, and particulate loading was evaluated in a test program at the Sandia National Laboratories. The test program was initiated to evaluate the feasibility of using commercially available nuclear-grade filters in the filtered pressure equalization system of a contact-handled transuranic waste transport system, called TRUPACT-I. The filtered pressure equalization system of TRUPACT-I assures containment of the activity within the limits permitted by federal regulations and simultaneously equalizes the pressure between the cavity of the packaging and the environment, and minimizes the buildup of radiolytically generated gases. The filters were exposed to temperatures, pressures and stresses that exceed expected environments in normal and accident conditions of transport. The performance of the test filters was determined by measuring and quantifying filter efficiency and the Darcy constant. In addition, the integrity of the filter housing was evaluated using non-destructive helium leak testing. The details of the test program and results obtained from the tests are presented in this paper

  11. Childhood bullying involvement predicts low-grade systemic inflammation into adulthood

    Science.gov (United States)

    Copeland, William E.; Wolke, Dieter; Lereya, Suzet Tanya; Shanahan, Lilly; Worthman, Carol; Costello, E. Jane

    2014-01-01

    Bullying is a common childhood experience that involves repeated mistreatment to improve or maintain one’s status. Victims display long-term social, psychological, and health consequences, whereas bullies display minimal ill effects. The aim of this study is to test how this adverse social experience is biologically embedded to affect short- or long-term levels of C-reactive protein (CRP), a marker of low-grade systemic inflammation. The prospective population-based Great Smoky Mountains Study (n = 1,420), with up to nine waves of data per subject, was used, covering childhood/adolescence (ages 9–16) and young adulthood (ages 19 and 21). Structured interviews were used to assess bullying involvement and relevant covariates at all childhood/adolescent observations. Blood spots were collected at each observation and assayed for CRP levels. During childhood and adolescence, the number of waves at which the child was bullied predicted increasing levels of CRP. Although CRP levels rose for all participants from childhood into adulthood, being bullied predicted greater increases in CRP levels, whereas bullying others predicted lower increases in CRP compared with those uninvolved in bullying. This pattern was robust, controlling for body mass index, substance use, physical and mental health status, and exposures to other childhood psychosocial adversities. A child’s role in bullying may serve as either a risk or a protective factor for adult low-grade inflammation, independent of other factors. Inflammation is a physiological response that mediates the effects of both social adversity and dominance on decreases in health. PMID:24821813

  12. Experimental studies of water hammer in propellant feed system of reaction control system

    Directory of Open Access Journals (Sweden)

    Avanish Kumar

    2018-03-01

    Full Text Available Water hammer pressure transient produces large dynamic forces which can damage the pipes and other assemblies in the feed line of a reaction control system (RCS. It has led to the failure of pressure transducers monitoring the manifold pressure in the feed line of RCS. Therefore, water hammer studies have been carried out to understand its effect in feed line. Feedline system has been simplified to develop a mathematical model and experiments have been carried out at extensive levels. The mathematical model was developed considering pipe of uniform c/s and moving liquid-gas interface. The experimental studies have been done using water as working medium instead of actual propellant. The studies showed that rate of pressurization have a very critical role on the water hammer amplitude. Sensitivity studies have been also carried out to study the effect of density, friction and initial liquid column length on water hammer amplitude. Keywords: Water hammer, Reaction control system (RCS, Propellant feed system, Experimental study, Testing

  13. Optimizing a machine learning based glioma grading system using multi-parametric MRI histogram and texture features.

    Science.gov (United States)

    Zhang, Xin; Yan, Lin-Feng; Hu, Yu-Chuan; Li, Gang; Yang, Yang; Han, Yu; Sun, Ying-Zhi; Liu, Zhi-Cheng; Tian, Qiang; Han, Zi-Yang; Liu, Le-De; Hu, Bin-Quan; Qiu, Zi-Yu; Wang, Wen; Cui, Guang-Bin

    2017-07-18

    Current machine learning techniques provide the opportunity to develop noninvasive and automated glioma grading tools, by utilizing quantitative parameters derived from multi-modal magnetic resonance imaging (MRI) data. However, the efficacies of different machine learning methods in glioma grading have not been investigated.A comprehensive comparison of varied machine learning methods in differentiating low-grade gliomas (LGGs) and high-grade gliomas (HGGs) as well as WHO grade II, III and IV gliomas based on multi-parametric MRI images was proposed in the current study. The parametric histogram and image texture attributes of 120 glioma patients were extracted from the perfusion, diffusion and permeability parametric maps of preoperative MRI. Then, 25 commonly used machine learning classifiers combined with 8 independent attribute selection methods were applied and evaluated using leave-one-out cross validation (LOOCV) strategy. Besides, the influences of parameter selection on the classifying performances were investigated. We found that support vector machine (SVM) exhibited superior performance to other classifiers. By combining all tumor attributes with synthetic minority over-sampling technique (SMOTE), the highest classifying accuracy of 0.945 or 0.961 for LGG and HGG or grade II, III and IV gliomas was achieved. Application of Recursive Feature Elimination (RFE) attribute selection strategy further improved the classifying accuracies. Besides, the performances of LibSVM, SMO, IBk classifiers were influenced by some key parameters such as kernel type, c, gama, K, etc. SVM is a promising tool in developing automated preoperative glioma grading system, especially when being combined with RFE strategy. Model parameters should be considered in glioma grading model optimization.

  14. Citric Acid-Modified Fenton's Reaction for the Oxidation of Chlorinated Ethylenes in Soil Solution Systems

    Energy Technology Data Exchange (ETDEWEB)

    Seol, Yongkoo; Javandel, Iraj

    2008-03-15

    Fenton's reagent, a solution of hydrogen peroxide and ferrous iron catalyst, is used for an in-situ chemical oxidation of organic contaminants. Sulfuric acid is commonly used to create an acidic condition needed for catalytic oxidation. Fenton's reaction often involves pressure buildup and precipitation of reaction products, which can cause safety hazards and diminish efficiency. We selected citric acid, a food-grade substance, as an acidifying agent to evaluate its efficiencies for organic contaminant removal in Fenton's reaction, and examined the impacts of using citric acid on the unwanted reaction products. A series of batch and column experiments were performed with varying H{sub 2}O{sub 2} concentrations to decompose selected chlorinated ethylenes. Either dissolved iron from soil or iron sulfate salt was added to provide the iron catalyst in the batch tests. Batch experiments revealed that both citric and sulfuric acid systems achieved over 90% contaminant removal rates, and the presence of iron catalyst was essential for effective decontamination. Batch tests with citric acid showed no signs of pressure accumulation and solid precipitations, however the results suggested that an excessive usage of H{sub 2}O{sub 2} relative to iron catalysts (Fe{sup 2+}/H{sub 2}O{sub 2} < 1/330) would result in lowering the efficiency of contaminant removal by iron chelations in the citric acid system. Column tests confirmed that citric acid could provide suitable acidic conditions to achieve higher than 55% contaminant removal rates.

  15. Reaction of long-lived radicals and vitamin C in γ-irradiated mammalian cells and their model system at 295 K. Tunneling reaction in biological system

    International Nuclear Information System (INIS)

    Matsumoto, Takuro; Miyazaki, Tetsuo; Kosugi, Yoshio; Kumada, Takayuki; Koyama, Sinji; Kodama, Seiji; Watanabe, Masami.

    1996-01-01

    When golden hamster embryo (GHE) cells or concentrated albumin solution (0.1 kg dm -3 ) that is a model system of cells is irradiated with γ-rays at 295 K, organic radicals produced can be observed by ESR. The organic radicals survive at both 295 K and 310 K for such a long time as 20 hr. The long-lived radicals in GHE cells and the albumin solution react with vitamin C by the rate constants of 0.007 dm 3 mol -1 s -1 and 0.014 dm 3 mol -1 s -1 , respectively. The long-lived radicals in human cells cause gene mutation, which is suppressed by addition of vitamin C. The isotope effect on the rate constant (k) for the reaction of the long-lived radicals and vitamin C has been studied in the albumin solution by use of protonated vitamin C and deuterated vitamin C. The isotope effect (k H /k D ) was more than 20-50 and was interpreted in terms of tunneling reaction. When GHE cells or the aqueous albumin solution (0.1 kg dm -3 ) is irradiated with γ-rays at 295 K, organic radicals produced survive for more than 24 hr at room temperature. Very recently we have found that vitamin C reacts with the long-lived organic radicals in the γ-irradiated albumin solution at high concentration of 0.1 kg dm -3 by the rate constant of 0.014 dm 3 mol -1 s -1 . Since most of reactions in biological systems including the reaction of vitamin C are a transfer of a hydrogen atom or a proton that has a large wave character, it is generally expected that the tunneling reaction may play an important role in biological systems at room temperature. The studies of isotope effects on reactions will give an information on the contribution of tunneling reaction. (J.P.N.)

  16. Optimization of Maillard Reaction in Model System of Glucosamine and Cysteine Using Response Surface Methodology.

    Science.gov (United States)

    Arachchi, Shanika Jeewantha Thewarapperuma; Kim, Ye-Joo; Kim, Dae-Wook; Oh, Sang-Chul; Lee, Yang-Bong

    2017-03-01

    Sulfur-containing amino acids play important roles in good flavor generation in Maillard reaction of non-enzymatic browning, so aqueous model systems of glucosamine and cysteine were studied to investigate the effects of reaction temperature, initial pH, reaction time, and concentration ratio of glucosamine and cysteine. Response surface methodology was applied to optimize the independent reaction parameters of cysteine and glucosamine in Maillard reaction. Box-Behnken factorial design was used with 30 runs of 16 factorial levels, 8 axial levels and 6 central levels. The degree of Maillard reaction was determined by reading absorption at 425 nm in a spectrophotometer and Hunter's L, a, and b values. ΔE was consequently set as the fifth response factor. In the statistical analyses, determination coefficients (R 2 ) for their absorbance, Hunter's L, a, b values, and ΔE were 0.94, 0.79, 0.73, 0.96, and 0.79, respectively, showing that the absorbance and Hunter's b value were good dependent variables for this model system. The optimum processing parameters were determined to yield glucosamine-cysteine Maillard reaction product with higher absorbance and higher colour change. The optimum estimated absorbance was achieved at the condition of initial pH 8.0, 111°C reaction temperature, 2.47 h reaction time, and 1.30 concentration ratio. The optimum condition for colour change measured by Hunter's b value was 2.41 h reaction time, 114°C reaction temperature, initial pH 8.3, and 1.26 concentration ratio. These results can provide the basic information for Maillard reaction of aqueous model system between glucosamine and cysteine.

  17. Traveling wave solutions for reaction-diffusion systems

    DEFF Research Database (Denmark)

    Lin, Zhigui; Pedersen, Michael; Tian, Canrong

    2010-01-01

    This paper is concerned with traveling waves of reaction–diffusion systems. The definition of coupled quasi-upper and quasi-lower solutions is introduced for systems with mixed quasimonotone functions, and the definition of ordered quasi-upper and quasi-lower solutions is also given for systems...... with quasimonotone nondecreasing functions. By the monotone iteration method, it is shown that if the system has a pair of coupled quasi-upper and quasi-lower solutions, then there exists at least a traveling wave solution. Moreover, if the system has a pair of ordered quasi-upper and quasi-lower solutions...

  18. Construction of the Classification and Grading Index System of Cultivated Land Based on the Viewpoint of Sustainable Development

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    In order to objectively and reasonably evaluate the actual and potential value of cultivated land, both social and ecological values are introduced into the classification and grading index system of cultivated land based on the viewpoint of sustainable development, after considering the natural and economic values of cultivated land. Index system construction of the sustainable utilization of cultivated land should follow the principles of economic viability, social acceptability, and ecological protection. Classification of cultivated land should take into account the soil fertility of cultivated land. Then, grading of cultivated land is carried out from the practical productivity (or potential productivity) of cultivated land. According to the existing classification index system of cultivated land, the soil, natural and environmental factors in plains, mountains and hills are mainly modified in the classification index system of cultivated land. And index systems for the cultivated land classification in plains, mountains and hills are set up. The grading index system of cultivated land is established based on the economic viability (economic value), social acceptability (social value) and protection of cultivated land (ecological value). Quantitative expression of cultivated land grading index is also carried out.

  19. EXFOR systems manual: Nuclear reaction data exchange format

    International Nuclear Information System (INIS)

    McLane, V.

    1996-07-01

    This document describes EXFOR, the exchange format designed to allow transmission of nuclear reaction data between the members of the Nuclear Data Centers Network. In addition to storing the data and its bibliographic information, experimental information, including source of uncertainties, is also compiled. The status and history of the data set is also included, e.g., the source of the data, any updates which have been made, and correlations to other data sets. The exchange format, as outlined, is designed to allow a large variety of numerical data tables with explanatory and bibliographic information to be transmitted in an easily machine-readable format (for checking and indicating possible errors) and a format that can be read by personnel (for passing judgment on and correcting any errors indicated by the machine)

  20. Pattern formation in three-dimensional reaction-diffusion systems

    Science.gov (United States)

    Callahan, T. K.; Knobloch, E.

    1999-08-01

    Existing group theoretic analysis of pattern formation in three dimensions [T.K. Callahan, E. Knobloch, Symmetry-breaking bifurcations on cubic lattices, Nonlinearity 10 (1997) 1179-1216] is used to make specific predictions about the formation of three-dimensional patterns in two models of the Turing instability, the Brusselator model and the Lengyel-Epstein model. Spatially periodic patterns having the periodicity of the simple cubic (SC), face-centered cubic (FCC) or body-centered cubic (BCC) lattices are considered. An efficient center manifold reduction is described and used to identify parameter regimes permitting stable lamellæ, SC, FCC, double-diamond, hexagonal prism, BCC and BCCI states. Both models possess a special wavenumber k* at which the normal form coefficients take on fixed model-independent ratios and both are described by identical bifurcation diagrams. This property is generic for two-species chemical reaction-diffusion models with a single activator and inhibitor.

  1. System of gait analysis based on ground reaction force assessment

    Directory of Open Access Journals (Sweden)

    František Vaverka

    2015-12-01

    Full Text Available Background: Biomechanical analysis of gait employs various methods used in kinematic and kinetic analysis, EMG, and others. One of the most frequently used methods is kinetic analysis based on the assessment of the ground reaction forces (GRF recorded on two force plates. Objective: The aim of the study was to present a method of gait analysis based on the assessment of the GRF recorded during the stance phase of two steps. Methods: The GRF recorded with a force plate on one leg during stance phase has three components acting in directions: Fx - mediolateral, Fy - anteroposterior, and Fz - vertical. A custom-written MATLAB script was used for gait analysis in this study. This software displays instantaneous force data for both legs as Fx(t, Fy(t and Fz(t curves, automatically determines the extremes of functions and sets the visual markers defining the individual points of interest. Positions of these markers can be easily adjusted by the rater, which may be necessary if the GRF has an atypical pattern. The analysis is fully automated and analyzing one trial takes only 1-2 minutes. Results: The method allows quantification of temporal variables of the extremes of the Fx(t, Fy(t, Fz(t functions, durations of the braking and propulsive phase, duration of the double support phase, the magnitudes of reaction forces in extremes of measured functions, impulses of force, and indices of symmetry. The analysis results in a standardized set of 78 variables (temporal, force, indices of symmetry which can serve as a basis for further research and diagnostics. Conclusions: The resulting set of variable offers a wide choice for selecting a specific group of variables with consideration to a particular research topic. The advantage of this method is the standardization of the GRF analysis, low time requirements allowing rapid analysis of a large number of trials in a short time, and comparability of the variables obtained during different research measurements.

  2. Large-time behavior of solutions to a reaction-diffusion system with distributed microstructure

    NARCIS (Netherlands)

    Muntean, A.

    2009-01-01

    Abstract We study the large-time behavior of a class of reaction-diffusion systems with constant distributed microstructure arising when modeling diffusion and reaction in structured porous media. The main result of this Note is the following: As t ¿ 8 the macroscopic concentration vanishes, while

  3. Concentration fluctuations in non-isothermal reaction-diffusion systems. II. The nonlinear case

    NARCIS (Netherlands)

    Bedeaux, D.; Ortiz de Zárate, J.M.; Pagonabarraga, I.; Sengers, J.V.; Kjelstrup, S.

    2011-01-01

    In this paper, we consider a simple reaction-diffusion system, namely, a binary fluid mixture with an association-dissociation reaction between two species. We study fluctuations at hydrodynamic spatiotemporal scales when this mixture is driven out of equilibrium by the presence of a temperature

  4. Studies on the alkali-silica reaction rim in a simplified calcium-alkali-silicate system

    NARCIS (Netherlands)

    Zheng, Kunpeng; Adriaensens, Peter; De Schutter, Geert; Ye, G.; Taerwe, Luc

    2016-01-01

    This work is intended to provide a better understanding about the properties and roles of the reaction rim in an alkali-silica reaction. A simplified calcium-alkali-silicate system was created to simulate the multiple interactions among reactive silica, alkaline solution and portlandite near the

  5. Development of a utility system for nuclear reaction data file: WinNRDF

    International Nuclear Information System (INIS)

    Aoyama, Shigeyoshi; Ohbayasi, Yosihide; Masui, Hiroshi; Chiba, Masaki; Kato, Kiyoshi; Ohnishi, Akira

    2000-01-01

    A utility system, WinNRDF, is developed for charged particle nuclear reaction data of NRDF (Nuclear Reaction Data File) on the Windows interface. By using this system, we can easily search the experimental data of a charged particle nuclear reaction in NRDF than old retrieval systems on the mainframe and also see graphically the experimental data on GUI (Graphical User Interface). We adopted a mechanism of making a new index of keywords to put to practical use of the time dependent properties of the NRDF database. (author)

  6. Availability analysis of safety grade multiple redundant controller used in advanced nuclear safety systems

    International Nuclear Information System (INIS)

    Son, Kwang Seop; Kim, Dong Hoon; Park, Gee Yong; Kang, Hyun Gook

    2018-01-01

    Highlights: •The multiple redundant controller, SPLC is configured as the combination of DMR and TMR architecture. •We construct the Markov model of SPLC using the concept of the system unavailability rate. •To satisfy the availability requirement of safety grade controller, the fault coverage factor (FCF) should be ≥0.8 and the MTTR of each module should be ≤100 h when FCF is 0.9. •The availability of SPLC is better than that of PLC having iTMR architecture however it is poorer than iTMR considering the off-line test and inspection on the assumption that MTTR of each module is ≤200 h. -- Abstract: We analyze the availability of the Safety Programmable Logic Controller (SPLC) having multiple redundant architectures. In the SPLC, input/output and processor module are configured as triple modular redundancy (TMR), and backplane bus, power and communication modules are configured as dual modular redundancy (DMR). The voting logics for redundant architectures are based on the forwarding error detection. It means that the receivers perform the voting logics based on the status information of transmitters. To analyze the availability of SPLC, we construct the Markov model and simplify the model adopting the system unavailability rate. The results show that the fault coverage factor should be ≥0.8 and Mean Time To Repair (MTTR) should be ≤100 h in order to satisfy the requirement that the availability of the safety grade PLC should be ≥0.995. Also we evaluate the availability of SPLC comparing to other PLCs such as simplex, processor DMR (pDMR) and independent TMR (iTMR) PLCs used in the existing nuclear safety systems. The availability of SPLC is higher than those of the simplex, pDMR but is lower than that of iTMR for one month which is the periodic off-line test and inspection. That’s why the number of redundant modules used in PLC is more dominant to increasing the availability than the number of fault masking methods such as voting logics used

  7. British athletics muscle injury classification: a reliability study for a new grading system

    International Nuclear Information System (INIS)

    Patel, A.; Chakraverty, J.; Pollock, N.; Chakraverty, R.; Suokas, A.K.; James, S.L.

    2015-01-01

    Aim: To implement and validate the newly proposed British athletics muscle injury classification in the assessment of hamstring injuries in track and field athletes and to analyse the nature and frequency of the discrepancies. Materials and methods: This was a retrospective study analysing hamstring injuries in elite British athletes using the proposed classification system. Classification of 65 hamstring injuries in 45 high-level athletes by two radiologists at two time points 4 months apart to determine interrater variability, intrarater variability, and feasibility of the classification system was undertaken. Results: Interrater Kappa values of 0.80 (95% confidence interval [CI]: 0.67–0.92; p<0.0001) for Round 1 and 0.88 (95% CI: 0.76–1.00; p<0.0001) for Round 2 of the review were observed. Percentages of agreement were 85% for Round 1 and 91% for Round 2. The intrarater Kappa value for the two reviewers were 0.76 (95% CI: 0.63–0.88; p<0.0001) and 0.65 (95% CI: 0.53–0.76; p<0.0001) and the average was 0.71 suggesting substantial overall agreement. The percentages of agreement were 82% and 72%, respectively. Conclusions: This classification system is straightforward to use and produces both reproducible and consistent results based on interrater and intrarater Kappa values with at least substantial agreement in all groups. Further work is ongoing to investigate whether individual grades within this classification system provide prognostic information and could guide clinical management. - Highlights: • This classification system is based on MRI parameters shown to have prognostic relevance. • It is simple to use, reproducible and clinically relevant which will enhance clinical practice. • Once clinicians are familiar with the classification inter & intrarater reliability will improve.

  8. Investigation of chloride-release of nuclear grade resin in PWR primary system coolant

    International Nuclear Information System (INIS)

    Cao Xiaoning; Li Yunde; Li Jinghong; Lin Fangliang

    1997-01-01

    A new preparation technique is developed for making the low-chloride nuclear-grade resin by commercial resin. The chloride remained in nuclear grade resin may release to PWR primary coolant. The amount of released chloride is depended on the concentration of boron, lithium, other anion impurities, and remained chloride concentration in resin

  9. Design of a fusion reaction-history measurement system with high temporal resolution

    International Nuclear Information System (INIS)

    Peng Xiaoshi; Wang Feng; Liu Shenye; Jiang Xiaohua; Tang Qi

    2010-01-01

    In order to accurately measure the history of fusion reaction for experimental study of inertial confinement fusion, we advance the design of a fusion reaction-history measurement system with high temporal resolution. The diagnostic system is composed of plastic scintillator and nose cone, an optical imaging system and the system of optic streak camera. Analyzing the capability of the system indicated that the instrument measured fusion reaction history at temporal resolution as low as 55ps and 40ps correspond to 2.45MeV DD neutrons and 14.03MeV DT neutrons. The instrument is able to measure the fusion reaction history at yields 1.5 x 10 9 DD neutrons, about 4 x 10 8 DT neutrons are required for a similar quality signal. (authors)

  10. Efficient production of D-tagatose using a food-grade surface display system.

    Science.gov (United States)

    Liu, Yi; Li, Sha; Xu, Hong; Wu, Lingtian; Xu, Zheng; Liu, Jing; Feng, Xiaohai

    2014-07-16

    D-tagatose, a functional sweetener, is commonly transformed from D-galactose by L-arabinose isomerase (L-AI). In this study, a novel type of biocatalyst, L-AI from Lactobacillus fermentum CGMCC2921 displayed on the spore surface of Bacillus subtilis 168, was developed for producing D-tagatose. The anchored L-AI, exhibiting the relatively high bioactivity, suggested that the surface display system using CotX as the anchoring protein was successfully constructed. The stability of the anchored L-AI was significantly improved. Specifically, the consolidation of thermal stability representing 87% of relative activity was retained even at 80 °C for 30 min, which remarkably favored the production of D-tagatose. Under the optimal conditions, the robust spores can convert 75% D-galactose (100 g/L) into D-tagatose after 24 h, and the conversion rate remained at 56% at the third cycle. Therefore, this biocatalysis system, which could express the target enzyme on the food-grade vector, was an alternative method for the value-added production of D-tagatose.

  11. The reaction of the immune system of fish to vaccination

    NARCIS (Netherlands)

    Lamers, C.H.J.

    1985-01-01

    The studies presented in this thesis deal with the effect of bacterial antigens of Yersinia ruckeri and Aeromonashydrophila on the immune system of carp. The antigens were administered by injection or by bath treatment. The effect on the immune system was studied by

  12. Grading of meningeal solitary fibrous tumors/hemangiopericytomas: analysis of the prognostic value of the Marseille Grading System in a cohort of 132 patients.

    Science.gov (United States)

    Macagno, Nicolas; Vogels, Rob; Appay, Romain; Colin, Carole; Mokhtari, Karima; Küsters, Benno; Wesseling, Pieter; Figarella-Branger, Dominique; Flucke, Uta; Bouvier, Corinne

    2018-03-30

    The finding that meningeal solitary fibrous tumors (SFTs) and meningeal hemangiopericytomas (HPCs) are both characterized by NAB2-STAT6 gene fusion has pushed their inclusion in the WHO 2016 Classification of tumors of the central nervous system (CNS) as different manifestations of the same entity. Given that the clinical behavior of the CNS SFT/HPC spectrum ranges from benign to malignant, it is presently unclear whether the grading criteria are still adequate. Here, we present the results of a study that analyzed the prognostic value of an updated version of the Marseille Grading System (MGS) in a retrospectively assembled cohort of 132 primary meningeal SFTs/HPCs with nuclear overexpression of STAT6. The median patient follow-up was 64 months (range 4-274 months); 73 cases (55%) were MGS I, 50 cases (38%) MGS II and 9 cases (7%) were MGS III. Progression-free survival (PFS) and disease-specific survival (DSS) were investigated using univariate analysis: the prognostic factors for PFS included MGS, extent of surgery, radiotherapy, chemotherapy and mitotic activity ≥5/10 high-power field (HPF). Moreover, MGS, radiotherapy, mitotic activity ≥5/10 HPF, and necrosis were the prognostic factors measured for DSS. In multivariate analysis, extent of surgery, mitotic activity ≥5/10 HPF, MGS I and MGS III were the independent prognostic factors measured for PFS while necrosis, MGS III and radiotherapy were the independent prognostic factors for DSS. In conclusion, our results show that assessing the malignancy risk of SFT/HPC should not rely on one single criterion like mitotic activity. Therefore, MGS is useful as it combines the value of different criteria. In particular, the combination of a high mitotic activity and necrosis (MGS III) indicates a particularly poor prognosis. © 2018 International Society of Neuropathology.

  13. Lifestyle and nutritional imbalances associated with Western diseases: causes and consequences of chronic systemic low-grade inflammation in an evolutionary context.

    Science.gov (United States)

    Ruiz-Núñez, Begoña; Pruimboom, Leo; Dijck-Brouwer, D A Janneke; Muskiet, Frits A J

    2013-07-01

    In this review, we focus on lifestyle changes, especially dietary habits, that are at the basis of chronic systemic low grade inflammation, insulin resistance and Western diseases. Our sensitivity to develop insulin resistance traces back to our rapid brain growth in the past 2.5 million years. An inflammatory reaction jeopardizes the high glucose needs of our brain, causing various adaptations, including insulin resistance, functional reallocation of energy-rich nutrients and changing serum lipoprotein composition. The latter aims at redistribution of lipids, modulation of the immune reaction, and active inhibition of reverse cholesterol transport for damage repair. With the advent of the agricultural and industrial revolutions, we have introduced numerous false inflammatory triggers in our lifestyle, driving us to a state of chronic systemic low grade inflammation that eventually leads to typically Western diseases via an evolutionary conserved interaction between our immune system and metabolism. The underlying triggers are an abnormal dietary composition and microbial flora, insufficient physical activity and sleep, chronic stress and environmental pollution. The disturbance of our inflammatory/anti-inflammatory balance is illustrated by dietary fatty acids and antioxidants. The current decrease in years without chronic disease is rather due to "nurture" than "nature," since less than 5% of the typically Western diseases are primary attributable to genetic factors. Resolution of the conflict between environment and our ancient genome might be the only effective manner for "healthy aging," and to achieve this we might have to return to the lifestyle of the Paleolithic era as translated to the 21st century culture. Copyright © 2013 Elsevier Inc. All rights reserved.

  14. Development and characterization of food-grade tracers for the global grain tracing and recall system.

    Science.gov (United States)

    Lee, Kyung-Min; Armstrong, Paul R; Thomasson, J Alex; Sui, Ruixiu; Casada, Mark; Herrman, Timothy J

    2010-10-27

    Tracing grain from the farm to its final processing destination as it moves through multiple grain-handling systems, storage bins, and bulk carriers presents numerous challenges to existing record-keeping systems. This study examines the suitability of coded caplets to trace grain, in particular, to evaluate methodology to test tracers' ability to withstand the rigors of a commercial grain handling and storage systems as defined by physical properties using measurement technology commonly applied to assess grain hardness and end-use properties. Three types of tracers to dispense into bulk grains for tracing the grain back to its field of origin were developed using three food-grade substances [processed sugar, pregelatinized starch, and silicified microcrystalline cellulose (SMCC)] as a major component in formulations. Due to a different functionality of formulations, the manufacturing process conditions varied for each tracer type, resulting in unique variations in surface roughness, weight, dimensions, and physical and spectroscopic properties before and after coating. The applied two types of coating [pregelatinized starch and hydroxypropylmethylcellulose (HPMC)] using an aqueous coating system containing appropriate plasticizers showed uniform coverage and clear coating. Coating appeared to act as a barrier against moisture penetration, to protect against mechanical damage of the surface of the tracers, and to improve the mechanical strength of tracers. The results of analysis of variance (ANOVA) tests showed the type of tracer, coating material, conditioning time, and a theoretical weight gain significantly influenced the morphological and physical properties of tracers. Optimization of these factors needs to be pursued to produce desirable tracers with consistent quality and performance when they flow with bulk grains throughout the grain marketing channels.

  15. The CCONE Code System and its Application to Nuclear Data Evaluation for Fission and Other Reactions

    Science.gov (United States)

    Iwamoto, O.; Iwamoto, N.; Kunieda, S.; Minato, F.; Shibata, K.

    2016-01-01

    A computer code system, CCONE, was developed for nuclear data evaluation within the JENDL project. The CCONE code system integrates various nuclear reaction models needed to describe nucleon, light charged nuclei up to alpha-particle and photon induced reactions. The code is written in the C++ programming language using an object-oriented technology. At first, it was applied to neutron-induced reaction data on actinides, which were compiled into JENDL Actinide File 2008 and JENDL-4.0. It has been extensively used in various nuclear data evaluations for both actinide and non-actinide nuclei. The CCONE code has been upgraded to nuclear data evaluation at higher incident energies for neutron-, proton-, and photon-induced reactions. It was also used for estimating β-delayed neutron emission. This paper describes the CCONE code system indicating the concept and design of coding and inputs. Details of the formulation for modelings of the direct, pre-equilibrium and compound reactions are presented. Applications to the nuclear data evaluations such as neutron-induced reactions on actinides and medium-heavy nuclei, high-energy nucleon-induced reactions, photonuclear reaction and β-delayed neutron emission are mentioned.

  16. The CCONE Code System and its Application to Nuclear Data Evaluation for Fission and Other Reactions

    Energy Technology Data Exchange (ETDEWEB)

    Iwamoto, O., E-mail: iwamoto.osamu@jaea.go.jp; Iwamoto, N.; Kunieda, S.; Minato, F.; Shibata, K.

    2016-01-15

    A computer code system, CCONE, was developed for nuclear data evaluation within the JENDL project. The CCONE code system integrates various nuclear reaction models needed to describe nucleon, light charged nuclei up to alpha-particle and photon induced reactions. The code is written in the C++ programming language using an object-oriented technology. At first, it was applied to neutron-induced reaction data on actinides, which were compiled into JENDL Actinide File 2008 and JENDL-4.0. It has been extensively used in various nuclear data evaluations for both actinide and non-actinide nuclei. The CCONE code has been upgraded to nuclear data evaluation at higher incident energies for neutron-, proton-, and photon-induced reactions. It was also used for estimating β-delayed neutron emission. This paper describes the CCONE code system indicating the concept and design of coding and inputs. Details of the formulation for modelings of the direct, pre-equilibrium and compound reactions are presented. Applications to the nuclear data evaluations such as neutron-induced reactions on actinides and medium-heavy nuclei, high-energy nucleon-induced reactions, photonuclear reaction and β-delayed neutron emission are mentioned.

  17. Remodelling of cellular excitation (reaction) and intercellular coupling (diffusion) by chronic atrial fibrillation represented by a reaction-diffusion system

    Science.gov (United States)

    Zhang, Henggui; Garratt, Clifford J.; Kharche, Sanjay; Holden, Arun V.

    2009-06-01

    Human atrial tissue is an excitable system, in which myocytes are excitable elements, and cell-to-cell electrotonic interactions are via diffusive interactions of cell membrane potentials. We developed a family of excitable system models for human atrium at cellular, tissue and anatomical levels for both normal and chronic atrial fibrillation (AF) conditions. The effects of AF-induced remodelling of cell membrane ionic channels (reaction kinetics) and intercellular gap junctional coupling (diffusion) on atrial excitability, conduction of excitation waves and dynamics of re-entrant excitation waves are quantified. Both ionic channel and gap junctional coupling remodelling have rate dependent effects on atrial propagation. Membrane channel conductance remodelling allows the propagation of activity at higher rates than those sustained in normal tissue or in tissue with gap junctional remodelling alone. Membrane channel conductance remodelling is essential for the propagation of activity at rates higher than 300/min as seen in AF. Spatially heterogeneous gap junction coupling remodelling increased the risk of conduction block, an essential factor for the genesis of re-entry. In 2D and 3D anatomical models, the dynamical behaviours of re-entrant excitation waves are also altered by membrane channel modelling. This study provides insights to understand the pro-arrhythmic effects of AF-induced reaction and diffusion remodelling in atrial tissue.

  18. Mutagenicity of heated sugar-casein systems: effect of the Maillard reaction.

    Science.gov (United States)

    Brands, C M; Alink, G M; van Boekel, M A; Jongen, W M

    2000-06-01

    The formation of mutagens after the heating of sugar-casein model systems at 120 degrees C was examined by the Ames test, using Salmonella typhimurium strain TA100. Several sugars (glucose, fructose, galactose, tagatose, lactose, and lactulose) were compared in their mutagenicities. Mutagenicity could be fully ascribed to Maillard reaction products and strongly varied with the kind of sugar. The differences in mutagenicity among the sugar-casein systems were caused by a difference in reaction rate and a difference in reaction mechanism. Sugars with a comparable reaction mechanism (glucose and galactose) showed a higher mutagenic activity corresponding with a higher Maillard reactivity. Disaccharides showed no mutagenic activity (lactose) or a lower mutagenic activity (lactulose) than their corresponding monosaccharides. Ketose sugars (fructose and tagatose) showed a remarkably higher mutagenicity compared with their aldose isomers (glucose and galactose), which was due to a difference in reaction mechanism.

  19. Exchange reactions in the systems of alkali metal, silver and thallium, sulfates, niobates and tantalates

    International Nuclear Information System (INIS)

    Belyaev, I.N.; Lupejko, T.G.; Nalbandyan, V.B.; Abanina, E.V.

    1978-01-01

    Investigated are exchange interactions in diagonal cross sections of twenty triple mutual systems with A and A' cations and SO 4 and MO 3 anions where A and A'-Li, Na, K, Ag, Tl, M-Nb, Ta using the methods of X-ray phase, chemical and differential thermal analyses. Exchange reaction between crystal complex oxide and melted salt are effective synthesis method. These reactions in particular permitted to obtain pure AgNbO 3 , AgTaO 3 and their solid solutions at temperatures hundreds degrees lower than in displacement reactions. Equilibrium samples of AMO 3 -A'MO 3 systems, continuous or discontinuous solid solutions, compounds (except NaMO 3 -KMO 3 , and also LiTaO 3 -KTaO 3 ) are formed in exchange reactions when there is sulfate shortage. Thus, exchange reactions can be applied for solid solution synthesis, and also for phase diagram study

  20. Pulse radiolysis studies of fast reactions in molecular systems. Progress report, November 1976--October 1977

    International Nuclear Information System (INIS)

    Dorfman, L.M.

    1977-01-01

    Results from research in the following two areas are given: formation, properties, and reactivity of molecular ionic species in irradiated liquid systems; and pulse radiolysis of elementary reactions in protein function

  1. Domino Wittig Diels-Alder reaction: An expeditious entry into the AB ring system of furanosesquiterpenes

    Digital Repository Service at National Institute of Oceanography (India)

    Patre, R.E.; Gawas, S.; Sen, S.; Parameswaran, P.S.; Tilve, S.G.

    A domino Wittig Diels - Alder reaction has been employed in delineating a short and flexible synthetic stratagem for ready access to the AB ring system and the tricyclic framework of furanosesquiterpenes, such as the bioactive natural products...

  2. Combustion reaction of Ti–Al–C–N system

    Indian Academy of Sciences (India)

    Materials and Chemical Engineering School, Zhongyuan University of Technology, Zhengzhou 450007, Henan, ... compounds in Ti–Al–C–N system was discussed as follows. ... tion, we can observe the crack propagation in the micrograph.

  3. Irrational reactions to negative outcomes: evidence for two conceptual systems.

    Science.gov (United States)

    Epstein, S; Lipson, A; Holstein, C; Huh, E

    1992-02-01

    According to cognitive-experiential self-theory (CEST), individuals have 2 systems for processing information, a rational system and an experiential system. Research conducted under norm theory (NT) has provided impressive evidence of an if only (IO) effect associated with postoutcome processing of aversive events that are highly consistent with formulations in CEST. Two studies involving vignettes adapted from NT were conducted that tested 4 hypotheses and corollaries derived from CEST. It was demonstrated, in support of hypotheses, that the IO effect can be obtained with ratings of one's own and of a protagonist's specific behaviors, as well as with ratings of a protagonist's diffuse emotions (the usual procedure); that a rational orientation decreases the IO effect; that increasing the intensity of outcomes increases it; and that priming the experiential system reduces people's ability to subsequently think rationally. The theoretical and research implications of these findings are discussed.

  4. Bee and bee products allergy in Turkish beekeepers: determination of risk factors for systemic reactions.

    Science.gov (United States)

    Celikel, S; Karakaya, G; Yurtsever, N; Sorkun, K; Kalyoncu, A F

    2006-01-01

    The prevalence of allergic reactions due to bee stings in beekeepers varies in different regions of the world. The aim of this study was to evaluate the characteristics of sting reactions and the risk factors for developing systemic reactions in Turkish beekeepers. A self-administered questionnaire was distributed to 1250 beekeepers to be completed in seven different cities of Turkey. A total of 494 (39.6 %) questionnaires were returned. There were 444 subjects (89.9 %) with a history of sting exposure in the previous 12 months. Systemic reactions were present in 29 subjects (6.5 %) and nine (2 %) reactions were anaphylactic. Fifty-five percent of beekeepers reported more than 100 bee stings in the previous year. When systemic reactions were controlled by age and duration of beekeeping in a logistic regression model, seasonal rhinitis (OR: 4.4, 95 % CI: 1.2-11.5), perennial rhinitis (OR: 4.6, 95 % CI: 1.2-18.2), food allergy (OR:7.0, 95 % CI: 2.0-25.0), physician-diagnosed asthma (OR: 8.0, 95 % CI: 2.5-25.6), having an atopic disease of any type (OR: 3.3, 95 % CI: 1.2-8.7) and having two or more atopic diseases (OR: 10.9, 95 % CI: 3.5-33.8) were significantly associated with systemic reactions due to bee sting in the previous 12 months. The incidence of systemic reactions in Turkish beekeepers is low, which might be due to the protective effect of a high frequency of bee stings. The risk of systemic reactions increases approximately three-fold when one atopic disease is present and eleven-fold when two or more concurrent atopic diseases are present with respect to no atopic disease.

  5. Assessment of a Chemotherapy Response Score (CRS) System for Tubo-Ovarian High-Grade Serous Carcinoma (HGSC)

    DEFF Research Database (Denmark)

    Ditzel, Helena M; Strickland, Kyle C; Meserve, Emily E

    2018-01-01

    A chemotherapy response score (CRS) system was recently described to assess the histopathologic response and prognosis of patients with tubo-ovarian high-grade serous carcinoma (HGSC) receiving neoadjuvant chemotherapy. The current study was performed as an independent assessment of this CRS syst...

  6. A Cluster Randomized Trial of the Social Skills Improvement System-Classwide Intervention Program (SSIS-CIP) in First Grade

    Science.gov (United States)

    DiPerna, James Clyde; Lei, Puiwa; Cheng, Weiyi; Hart, Susan Crandall; Bellinger, Jillian

    2018-01-01

    The purpose of this study was to evaluate the efficacy of a universal social skills program, the Social Skills Improvement System Classwide Intervention Program (SSIS-CIP; Elliott & Gresham, 2007), for students in first grade. Classrooms from 6 elementary schools were randomly assigned to treatment or business-as-usual control conditions.…

  7. Measuring Listening Comprehension Skills of 5th Grade School Students with the Help of Web Based System

    Directory of Open Access Journals (Sweden)

    M. Bahaddin Acat

    2016-01-01

    Full Text Available The main purpose of this study is to measure listening comprehension skills of 5th grade school students with the help of web based system. This study was conducted on 5th grade students studying at the primary schools of Eskisehir. The scale used in the process of the study is “Web Based Listening Scale”. In the process of the study, it was investigated that the level of differentiation listening skill and educational level of mother and father, family income level, Turkish Course grading note, the most popular and listened music genre. According to the results obtained that significant difference was found with listening skills and educational level of mother and father, family income level and the most popular and listened music genre. Also it was found that there is powerful relationship between listening skills and Turkish Course grading note. In the process of the research, it was observed the students used the web based system more attentive and motivated. Nevertheless, personalized measuring environment was provided by the web based system. Finally, it can be said that the web based systems can be used positively for language learning, teaching, and instruction, improving, measuring and assessing process.

  8. Validating "Value Added" in the Primary Grades: One District's Attempts to Increase Fairness and Inclusivity in Its Teacher Evaluation System

    Science.gov (United States)

    Amrein-Beardsley, Audrey; Polasky, Sarah; Holloway-Libell, Jessica

    2016-01-01

    One urban district in the state of Arizona sought to use an alternative achievement test (i.e., the Northwest Evaluation Association's (NWEA) Measures of Academic Progress for Primary Grades (MAP)) to include more value-added ineligible teachers in the districts' growth and merit pay system. The goal was to allow for its K-2 teachers to be more…

  9. Implementation of an Automated Grading System with an Adaptive Learning Component to Affect Student Feedback and Response Time

    Science.gov (United States)

    Matthews, Kevin; Janicki, Thomas; He, Ling; Patterson, Laurie

    2012-01-01

    This research focuses on the development and implementation of an adaptive learning and grading system with a goal to increase the effectiveness and quality of feedback to students. By utilizing various concepts from established learning theories, the goal of this research is to improve the quantity, quality, and speed of feedback as it pertains…

  10. [Low-grade systemic inflammation and the development of metabolic diseases: from the molecular evidence to the clinical practice].

    Science.gov (United States)

    León-Pedroza, José Israel; González-Tapia, Luis Alonso; del Olmo-Gil, Esteban; Castellanos-Rodríguez, Diana; Escobedo, Galileo; González-Chávez, Antonio

    2015-01-01

    Systemic inflammation is characterised by high circulating levels of inflammatory cytokines and increased macrophage infiltration in peripheral tissues. Most importantly, this inflammatory state does not involve damage or loss of function of the infiltrated tissue, which is a distinctive feature of the low-grade systemic inflammation. The term "meta-inflammation" has also been used to refer to the low-grade systemic inflammation due to its strong relationship with the development of cardio-metabolic diseases in obesity. A review is presented on the recent clinical and experimental evidence concerning the role of adipose tissue inflammation as a key mediator of low-grade systemic inflammation. Furthermore, the main molecular mechanisms involved in the inflammatory polarization of macrophages with the ability to infiltrate both the adipose tissue and the vascular endothelium via activation of toll-like receptors by metabolic damage-associated molecular patterns, such as advanced glycation-end products and oxidized lipoproteins, is discussed. Finally, a review is made of the pathogenic mechanisms through which the low-grade systemic inflammation contributes to develop insulin resistance, dyslipidaemia, atherogenesis, type 2 diabetes, and hypertension in obese individuals. A better understanding of the molecular mechanisms of low-grade systemic inflammation in promoting cardio-metabolic diseases is necessary, in order to further design novel anti-inflammatory therapies that take into consideration clinical data, as well as the circulating levels of cytokines, immune cells, and metabolic damage-associated molecular patterns in each patient. Copyright © 2015 Academia Mexicana de Cirugía A.C. Published by Masson Doyma México S.A. All rights reserved.

  11. Cross-diffusional effect in a telegraph reaction diffusion Lotka-Volterra two competitive system

    International Nuclear Information System (INIS)

    Abdusalam, H.A; Fahmy, E.S.

    2003-01-01

    It is known now that, telegraph equation is more suitable than ordinary diffusion equation in modelling reaction diffusion in several branches of sciences. Telegraph reaction diffusion Lotka-Volterra two competitive system is considered. We observed that this system can give rise to diffusive instability only in the presence of cross-diffusion. Local and global stability analysis in the cross-diffusional effect are studied by considering suitable Lyapunov functional

  12. Development of utility system of charged particle Nuclear Reaction Data on Unified Interface

    International Nuclear Information System (INIS)

    Aoyama, Shigeyoshi; Ohbayashi, Yosihide; Kato, Kiyoshi; Masui, Hiroshi; Ohnishi, Akira; Chiba, Masaki

    1999-01-01

    We have developed a utility system, WinNRDF, for a nuclear charged particle reaction data of NRDF (Nuclear Reaction Data File) on a unified interface of Windows95, 98/NT. By using the system, we can easily search the experimental data of a charged particle reaction in NRDF and also see the graphic data on GUI (Graphical User Interface). Furthermore, we develop a mechanism of making a new index of keywords in order to include the time developing character of the NRDF database. (author)

  13. Development of charged particle nuclear reaction data retrieval system on IntelligentPad

    International Nuclear Information System (INIS)

    Ohbayashi, Yosihide; Masui, Hiroshi; Aoyama, Shigeyoshi; Kato, Kiyoshi; Chiba, Masaki

    1999-01-01

    An newly designed database retrieval system of charged particle nuclear reaction database system is developed with IntelligentPad architecture. We designed the network-based (server-client) data retrieval system, and a client system constructs on Windows95, 98/NT with IntelligentPad. We set the future aim of our database system toward the 'effective' use of nuclear reaction data: I. 'Re-produce, Re-edit, Re-use', II. 'Circulation, Evolution', III. 'Knowledge discovery'. Thus, further developments are under way. (author)

  14. Outcomes of different Class II treatments : Comparisons using the American Board of Orthodontics Model Grading System.

    Science.gov (United States)

    Akinci Cansunar, Hatice; Uysal, Tancan

    2016-07-01

    The aim of this study was to evaluate the clinical outcomes of three different Class II treatment modalities followed by fixed orthodontic therapy, using the American Board of Orthodontics Model Grading System (ABO-MGS). As a retrospective study, files of patients treated at postgraduate orthodontic  clinics in different cities in Turkey was randomly selected. From 1684 posttreatment records, 669 patients were divided into three groups: 269 patients treated with extraction of two upper premolars, 198 patients treated with cervical headgear, and 202 patients treated with functional appliances. All the cases were evaluated by one researcher using ABO-MGS. The χ (2), Z test, and multivariate analysis of variance were used for statistical evaluation (p < 0.05). No significant differences were found among the groups in buccolingual inclination, overjet, occlusal relationship, and root angulation. However, there were significant differences in alignment, marginal ridge height, occlusal contact, interproximal contact measurements, and overall MGS average scores. The mean treatment time between the extraction and functional appliance groups was significantly different (p = 0.017). According to total ABO-MGS scores, headgear treatment had better results than functional appliances. The headgear group had better tooth alignment than the extraction group. Headgear treatment resulted in better occlusal contacts than the functional appliances and had lower average scores for interproximal contact measurements. Functional appliances had the worst average scores for marginal ridge height. Finally, the functional appliance group had the longest treatment times.

  15. Nonlinear reaction-diffusion systems conditional symmetry, exact solutions and their applications in biology

    CERN Document Server

    Cherniha, Roman

    2017-01-01

    This book presents several fundamental results in solving nonlinear reaction-diffusion equations and systems using symmetry-based methods. Reaction-diffusion systems are fundamental modeling tools for mathematical biology with applications to ecology, population dynamics, pattern formation, morphogenesis, enzymatic reactions and chemotaxis. The book discusses the properties of nonlinear reaction-diffusion systems, which are relevant for biological applications, from the symmetry point of view, providing rigorous definitions and constructive algorithms to search for conditional symmetry (a nontrivial generalization of the well-known Lie symmetry) of nonlinear reaction-diffusion systems. In order to present applications to population dynamics, it focuses mainly on two- and three-component diffusive Lotka-Volterra systems. While it is primarily a valuable guide for researchers working with reaction-diffusion systems  and those developing the theoretical aspects of conditional symmetry conception,...

  16. NASA Ares I Launch Vehicle Roll and Reaction Control Systems Design Status

    Science.gov (United States)

    Butt, Adam; Popp, Chris G.; Pitts, Hank M.; Sharp, David J.

    2009-01-01

    This paper provides an update of design status following the preliminary design review of NASA s Ares I first stage roll and upper stage reaction control systems. The Ares I launch vehicle has been chosen to return humans to the moon, mars, and beyond. It consists of a first stage five segment solid rocket booster and an upper stage liquid bi-propellant J-2X engine. Similar to many launch vehicles, the Ares I has reaction control systems used to provide the vehicle with three degrees of freedom stabilization during the mission. During launch, the first stage roll control system will provide the Ares I with the ability to counteract induced roll torque. After first stage booster separation, the upper stage reaction control system will provide the upper stage element with three degrees of freedom control as needed. Trade studies and design assessments conducted on the roll and reaction control systems include: propellant selection, thruster arrangement, pressurization system configuration, and system component trades. Since successful completion of the preliminary design review, work has progressed towards the critical design review with accomplishments made in the following areas: pressurant / propellant tank, thruster assembly, and other component configurations, as well as thruster module design, and waterhammer mitigation approach. Also, results from early development testing are discussed along with plans for upcoming system testing. This paper concludes by summarizing the process of down selecting to the current baseline configuration for the Ares I roll and reaction control systems.

  17. Studying chemical reactions in biological systems with MBN Explorer

    DEFF Research Database (Denmark)

    Sushko, Gennady B.; Solov'yov, Ilia A.; Verkhovtsev, Alexey V.

    2016-01-01

    The concept of molecular mechanics force field has been widely accepted nowadays for studying various processes in biomolecular systems. In this paper, we suggest a modification for the standard CHARMM force field that permits simulations of systems with dynamically changing molecular topologies....... The implementation of the modified force field was carried out in the popular program MBN Explorer, and, to support the development, we provide several illustrative case studies where dynamical topology is necessary. In particular, it is shown that the modified molecular mechanics force field can be applied...

  18. AN APPLE GRADING SYSTEM ACCORDING TO EUROPEAN FRUIT QUALITY STANDARDS USING GABOR FILTER AND ARTIFICIAL NEURAL NETWORKS

    Directory of Open Access Journals (Sweden)

    KEYVAN ASEFPOUR VAKILIAN

    2016-04-01

    Full Text Available With the advent of applications of machine learning methods in food engineering in recent decades, several intelligent methods have been introduced in fruit grading technology. In this study, an apple grading system is presented using image’s textural features extraction and artificial intelligence. The objective of this study was to simplify the use of Gabor filter in classification of two varieties of apple fruits (Golden Delicious and Red Delicious in four categories according to the European fruit quality standards. Using this filter, neural network classifier was trained for four category grading of the fruits. Two textural parameters were extracted from each obtained image: mean and variance of energy values of obtained image representing image’s luminous intensity and contrast, respectively. Experimental results indicated that the training of extracted features of about 350 fruits enabled the network to classify the test samples with appropriate accuracy. Compared to the state-of-the-art, the proposed grading categories (‘Extra’, ‘Type 1’, ‘Type 2’ and ‘Rejected’ classes achieved acceptable recognition rates of about 89 % and 92 % overall accuracy for Golden Delicious and Red Delicious varieties, respectively. These experimental results show the appropriate application of proposed method in fast grading of apple fruits. Furthermore, proposed feature extraction and network training methods can be used efficiently in online applications.

  19. The effects of reactants ratios, reaction temperatures and times on Maillard reaction products of the L-ascorbic acid/L-glutamic acid system

    Directory of Open Access Journals (Sweden)

    Yong-Yan ZHOU

    2016-01-01

    Full Text Available Abstract The transformation law of the Maillard reaction products with three different reactants ratios - equimolar reactants, excess L-glutamic acid and excess L-ascorbic acid reaction respectively, five different temperatures, and different time conditions for the L-ascorbic acid / L-glutamic acid system were investigated. Results showed that, the increase of the reaction time and temperature led to the increase of the browning products, uncoloured intermediate products, as well as aroma compounds. Compared with the equimolar reaction system, the excess L-ascorbic acid reaction system produced more browning products and uncoloured intermediate products, while the aroma compounds production remained the same. In the excess L-glutamic acid system, the uncoloured intermediate products increased slightly, the browning products remained the same, while the aroma compounds increased.

  20. Chemical reaction systems with a homoclinic bifurcation: an inverse problem

    Czech Academy of Sciences Publication Activity Database

    Plesa, T.; Vejchodský, Tomáš; Erban, R.

    2016-01-01

    Roč. 54, č. 10 (2016), s. 1884-1915 ISSN 0259-9791 EU Projects: European Commission(XE) 328008 - STOCHDETBIOMODEL Institutional support: RVO:67985840 Keywords : nonnegative dynamical systems * bifurcations * oscillations Subject RIV: BA - General Mathematics Impact factor: 1.308, year: 2016 http://link.springer.com/article/10.1007%2Fs10910-016-0656-1

  1. The effect of two grading systems on the performance of medical students during oral examinations

    DEFF Research Database (Denmark)

    Ba-Ali, Shakoor; Jemec, Gregor B E; Sander, Birgit

    2017-01-01

    group (p = 0.45). Moreover, the average mark was higher among the international students (mean = 10.3, on the seven-point grading scale) than in the Danish speaking classes (mean = 9.1). CONCLUSION: The seven-point grading scale seems to motivate students to yield a better performance; hence tiered......INTRODUCTION: Either a pass/fail approach or a seven-point grading scale are used to evaluate students at the Danish universities. The aim of this study was to explore any effect of the assessment methods on student performances during oral exams. METHODS: In a prospective study including 1......,037 examinations in three medical subjects, we investigated the difference in the test scores between the spring- and autumn semester. In the spring semester, the students could either pass or fail the subject (pass/fail) while in the following autumn semester, the students were assessed by tiered grading (seven...

  2. Process technology for multi-enzymatic reaction systems

    DEFF Research Database (Denmark)

    Xue, Rui; Woodley, John M.

    2012-01-01

    In recent years, biocatalysis has started to provide an important green tool in synthetic organic chemistry. Currently, the idea of using multi-enzymatic systems for industrial production of chemical compounds becomes increasingly attractive. Recent examples demonstrate the potential of enzymatic...... synthesis and fermentation as an alternative to chemical-catalysis for the production of pharmaceuticals and fine chemicals. In particular, the use of multiple enzymes is of special interest. However, many challenges remain in the scale-up of a multi-enzymatic system. This review summarizes and discusses...... the technology options and strategies that are available for the development of multi-enzymatic processes. Some engineering tools, including kinetic models and operating windows, for developing and evaluating such processes are also introduced....

  3. Reaction factoring and bipartite update graphs accelerate the Gillespie Algorithm for large-scale biochemical systems.

    Directory of Open Access Journals (Sweden)

    Sagar Indurkhya

    Full Text Available ODE simulations of chemical systems perform poorly when some of the species have extremely low concentrations. Stochastic simulation methods, which can handle this case, have been impractical for large systems due to computational complexity. We observe, however, that when modeling complex biological systems: (1 a small number of reactions tend to occur a disproportionately large percentage of the time, and (2 a small number of species tend to participate in a disproportionately large percentage of reactions. We exploit these properties in LOLCAT Method, a new implementation of the Gillespie Algorithm. First, factoring reaction propensities allows many propensities dependent on a single species to be updated in a single operation. Second, representing dependencies between reactions with a bipartite graph of reactions and species requires only storage for reactions, rather than the required for a graph that includes only reactions. Together, these improvements allow our implementation of LOLCAT Method to execute orders of magnitude faster than currently existing Gillespie Algorithm variants when simulating several yeast MAPK cascade models.

  4. Reaction Factoring and Bipartite Update Graphs Accelerate the Gillespie Algorithm for Large-Scale Biochemical Systems

    Science.gov (United States)

    Indurkhya, Sagar; Beal, Jacob

    2010-01-01

    ODE simulations of chemical systems perform poorly when some of the species have extremely low concentrations. Stochastic simulation methods, which can handle this case, have been impractical for large systems due to computational complexity. We observe, however, that when modeling complex biological systems: (1) a small number of reactions tend to occur a disproportionately large percentage of the time, and (2) a small number of species tend to participate in a disproportionately large percentage of reactions. We exploit these properties in LOLCAT Method, a new implementation of the Gillespie Algorithm. First, factoring reaction propensities allows many propensities dependent on a single species to be updated in a single operation. Second, representing dependencies between reactions with a bipartite graph of reactions and species requires only storage for reactions, rather than the required for a graph that includes only reactions. Together, these improvements allow our implementation of LOLCAT Method to execute orders of magnitude faster than currently existing Gillespie Algorithm variants when simulating several yeast MAPK cascade models. PMID:20066048

  5. Reaction factoring and bipartite update graphs accelerate the Gillespie Algorithm for large-scale biochemical systems.

    Science.gov (United States)

    Indurkhya, Sagar; Beal, Jacob

    2010-01-06

    ODE simulations of chemical systems perform poorly when some of the species have extremely low concentrations. Stochastic simulation methods, which can handle this case, have been impractical for large systems due to computational complexity. We observe, however, that when modeling complex biological systems: (1) a small number of reactions tend to occur a disproportionately large percentage of the time, and (2) a small number of species tend to participate in a disproportionately large percentage of reactions. We exploit these properties in LOLCAT Method, a new implementation of the Gillespie Algorithm. First, factoring reaction propensities allows many propensities dependent on a single species to be updated in a single operation. Second, representing dependencies between reactions with a bipartite graph of reactions and species requires only storage for reactions, rather than the required for a graph that includes only reactions. Together, these improvements allow our implementation of LOLCAT Method to execute orders of magnitude faster than currently existing Gillespie Algorithm variants when simulating several yeast MAPK cascade models.

  6. Treatment delivery software for a new clinical grade ultrasound system for thermoradiotherapy.

    Science.gov (United States)

    Novák, Petr; Moros, Eduardo G; Straube, William L; Myerson, Robert J

    2005-11-01

    A detailed description of a clinical grade Scanning Ultrasound Reflector Linear Array System (SURLAS) applicator was given in a previous paper [Med. Phys. 32, 230-240 (2005)]. In this paper we concentrate on the design, development, and testing of the personal computer (PC) based treatment delivery software that runs the therapy system. The SURLAS requires the coordinated interaction between the therapy applicator and several peripheral devices for its proper and safe operation. One of the most important tasks was the coordination of the input power sequences for the elements of two parallel opposed ultrasound arrays (eight 1.5 cm x 2 cm elements/array, array 1 and 2 operate at 1.9 and 4.9 MHz, respectively) in coordination with the position of a dual-face scanning acoustic reflector. To achieve this, the treatment delivery software can divide the applicator's treatment window in up to 64 sectors (minimum size of 2 cm x 2 cm), and control the power to each sector independently by adjusting the power output levels from the channels of a 16-channel radio-frequency generator. The software coordinates the generator outputs with the position of the reflector as it scans back and forth between the arrays. Individual sector control and dual frequency operation allows the SURLAS to adjust power deposition in three dimensions to superficial targets coupled to its treatment window. The treatment delivery software also monitors and logs several parameters such as temperatures acquired using a 16-channel thermocouple thermometry unit. Safety (in particular to patients) was the paramount concern and design criterion. Failure mode and effects analysis (FMEA) was applied to the applicator as well as to the entire therapy system in order to identify safety issues and rank their relative importance. This analysis led to the implementation of several safety mechanisms and a software structure where each device communicates with the controlling PC independently of the others. In case

  7. Externally controlled anisotropy in pattern-forming reaction-diffusion systems.

    Science.gov (United States)

    Escala, Dario M; Guiu-Souto, Jacobo; Muñuzuri, Alberto P

    2015-06-01

    The effect of centrifugal forces is analyzed in a pattern-forming reaction-diffusion system. Numerical simulations conducted on the appropriate extension of the Oregonator model for the Belousov-Zhabotinsky reaction show a great variety of dynamical behaviors in such a system. In general, the system exhibits an anisotropy that results in new types of patterns or in a global displacement of the previous one. We consider the effect of both constant and periodically modulated centrifugal forces on the different types of patterns that the system may exhibit. A detailed analysis of the patterns and behaviors observed for the different parameter values considered is presented here.

  8. Development of the Automatic Modeling System for Reaction Mechanisms Using REX+JGG

    Science.gov (United States)

    Takahashi, Takahiro; Kawai, Kohei; Nakai, Hiroyuki; Ema, Yoshinori

    The identification of appropriate reaction models is very helpful for developing chemical vapor deposition (CVD) processes. In this study, we developed an automatic modeling system that analyzes experimental data on the cross- sectional shapes of films deposited on substrates with nanometer- or micrometer-sized trenches. The system then identifies a suitable reaction model to describe the film deposition. The inference engine used by the system to model the reaction mechanism was designed using real-coded genetic algorithms (RCGAs): a generation alternation model named "just generation gap" (JGG) and a real-coded crossover named "real-coded ensemble crossover" (REX). We studied the effect of REX+JGG on the system's performance, and found that the system with REX+JGG was the most accurate and reliable at model identification among the algorithms that we studied.

  9. A review of post-column photochemical reaction systems coupled to electrochemical detection in HPLC

    International Nuclear Information System (INIS)

    Fedorowski, Jennifer; LaCourse, William R.

    2010-01-01

    Post-column photochemical reaction systems have developed into a common approach for enhancing conventional methods of detection in HPLC. Photochemical reactions as a means of 'derivatization' have a significant number of advantages over chemical reaction-based methods, and a significant effort has been demonstrated to develop an efficient photochemical reactor. When coupled to electrochemical (EC) detection, the technique allows for the sensitive and selective determination of a variety of compounds (e.g., organic nitro explosives, beta-lactam antibiotics, sulfur-containing antibiotics, pesticides and insecticides). This review will focus on developments and methods using post-column photochemical reaction systems followed by EC detection in liquid chromatography. Papers are presented in chronological order to emphasize the evolution of the approach and continued importance of the application.

  10. The predictive validity of grade point average scores in a partial lottery medical school admission system.

    Science.gov (United States)

    Cohen-Schotanus, Janke; Muijtjens, Arno M M; Reinders, Jan J; Agsteribbe, Jessica; van Rossum, Herman J M; van der Vleuten, Cees P M

    2006-10-01

    To ascertain whether the grade point average (GPA) of school-leaving examinations is related to study success, career development and scientific performance. The problem of restriction of range was expected to be partially reduced due to the use of a national lottery system weighted in favour of students with higher GPAs. We studied the students (n = 398) admitted to the Faculty of Medicine, University of Groningen, the Netherlands in 1982 and 1983. Data concerning drop-out and study progress were derived from the student administration. Data about career development were obtained from annual interviews with graduates (n = 318) between 1993 and 2000. Literature searches yielded data concerning scientific performance. Multiple linear regression and logistic regression were used to analyse the data. The variables 'gender' and 'cohort' and their interaction were included in the analyses to account for variation in the general level of the dependent variable and the effect of GPA on the dependent variable. GPA scores had no effect on drop-out rate. High GPA scores were associated with significantly less time to graduation, more chance of a preferred placement for specialist training and higher scientific output. GPA was not related to income. Gender differences were found for study duration and scientific output. Women graduated earlier and published less. The GPA of school-leaving examinations was found to be related to study success, career development and scientific performance. In this study the usual problem of restriction of range was shown to be absent. The weighted lottery procedure even resulted in an over-dispersion of candidates relative to the applicants. The resulting effect sizes were in agreement with those reported in other studies.

  11. An incomplete assembly with thresholding algorithm for systems of reaction-diffusion equations in three space dimensions IAT for reaction-diffusion systems

    International Nuclear Information System (INIS)

    Moore, Peter K.

    2003-01-01

    Solving systems of reaction-diffusion equations in three space dimensions can be prohibitively expensive both in terms of storage and CPU time. Herein, I present a new incomplete assembly procedure that is designed to reduce storage requirements. Incomplete assembly is analogous to incomplete factorization in that only a fixed number of nonzero entries are stored per row and a drop tolerance is used to discard small values. The algorithm is incorporated in a finite element method-of-lines code and tested on a set of reaction-diffusion systems. The effect of incomplete assembly on CPU time and storage and on the performance of the temporal integrator DASPK, algebraic solver GMRES and preconditioner ILUT is studied

  12. Thorium reactions in borosilicate-glass/water systems

    International Nuclear Information System (INIS)

    Rai, D.; Hess, N.J.; Felmy, A.R.; Moore, D.A.; Yui, M.

    2005-01-01

    Studies were conducted on the dissolution of Th-doped borosilicate glass, a complex assemblage of 24 different elements in various proportions, in a wide range of pH values (0.5 to 12) and carbonate (as high as 6.2 m) and bicarbonate (as high as 1.0 m) concentrations, and as a function of time to determine whether the observed thorium concentrations exhibit an equilibrium phenomenon and to ascertain whether existing thermodynamic data can be used to interpret these results. Measurable Th concentrations were observed in either the very acidic (pH 0.5 to 4) solutions or alkaline solutions containing relatively high carbonate/bicarbonate concentrations. Steady state Th concentrations were reached over time from both the oversaturation and undersaturation directions, indicating that Th concentrations are controlled by an equilibrium solubility phenomenon. The XRD, EXAFS, and thermodynamic analyses of solubility data failed to definitively identify the nature of the solubility-controlling solid in this complex system; however, the data suggests that the solubility-controlling solid most likely involves the Th-silicate phase and that the observed Th concentrations are up to many orders of magnitude lower than in equilibrium with ThO 2 (am). The solubility study also showed that existing thermodynamic data for carbonato complexes of Th can be used to reliably predict Th concentrations in relatively dilute to concentrated carbonate/bicarbonate solutions. (orig.)

  13. Fatty degeneration of the rotator cuff muscles on pre- and postoperative CT arthrography (CTA): is the Goutallier grading system reliable?

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eugene; Choi, Jung-Ah; Kang, Heung Sik [Seoul National University Bundang Hospital, Department of Radiology, Seongnam-si, Gyeongi-do (Korea, Republic of); Seoul National University College of Medicine, Department of Radiology, 28 Yeongon-dong, Chongno-gu, Seoul (Korea, Republic of); Oh, Joo Han [Seoul National University Bundang Hospital, Department of Orthopedic Surgery, Seongnam-si, Gyeongi-do (Korea, Republic of); Ahn, Soyeon [Seoul National University Bundang Hospital, Medical Research Collaborating Center, Seongnam-si, Gyeongi-do (Korea, Republic of); Hong, Sung Hwan [Seoul National University College of Medicine, Department of Radiology, 28 Yeongon-dong, Chongno-gu, Seoul (Korea, Republic of); Chai, Jee Won [SMG-SNU Boramae Medical Center, Department of Radiology, 425 Shindaebang-dong, Dongjak-gu, Seoul (Korea, Republic of)

    2013-09-15

    To retrospectively evaluate fatty degeneration (FD) of rotator cuff muscles on CTA using Goutallier's grading system and quantitative measurements with comparison between pre- and postoperative states. IRB approval was obtained for this study. Two radiologists independently reviewed pre- and postoperative CTAs of 43 patients (24 males and 19 females, mean age, 58.1 years) with 46 shoulders confirmed as full-thickness tears with random distribution. FD of supraspinatus, infraspinatus/teres minor, and subscapularis was assessed using Goutallier's system and by quantitative measurements of Hounsfield units (HUs) on sagittal images. Changes in FD grades and HUs were compared between pre- and postoperative CTAs and analyzed with respect to preoperative tear size and postoperative cuff integrity. The correlations between qualitative grades and quantitative measurements and their inter-observer reliabilities were also assessed. There was statistically significant correlation between FD grades and HU measurements of all muscles on pre- and postoperative CTA (p < 0.05). Inter-observer reliability of fatty degeneration grades were excellent to substantial on both pre- and postoperative CTA in supraspinatus (0.8685 and 0.8535) and subscapularis muscles (0.7777 and 0.7972), but fair in infraspinatus/teres minor muscles (0.5791 and 0.5740); however, quantitative Hounsfield units measurements showed excellent reliability for all muscles (ICC: 0.7950 and 0.9346 for SST, 0.7922 and 0.8492 for SSC, and 0.9254 and 0.9052 for IST/TM). No muscle showed improvement of fatty degeneration after surgical repair on qualitative and quantitative assessments; there was no difference in changes of fatty degeneration after surgical repair according to preoperative tear size and post-operative cuff integrity (p > 0.05). The average dose-length product (DLP, mGy . cm) was 365.2 mGy . cm (range, 323.8-417.2 mGy . cm) and estimated average effective dose was 5.1 mSv. Goutallier grades

  14. Delay-induced wave instabilities in single-species reaction-diffusion systems

    Science.gov (United States)

    Otto, Andereas; Wang, Jian; Radons, Günter

    2017-11-01

    The Turing (wave) instability is only possible in reaction-diffusion systems with more than one (two) components. Motivated by the fact that a time delay increases the dimension of a system, we investigate the presence of diffusion-driven instabilities in single-species reaction-diffusion systems with delay. The stability of arbitrary one-component systems with a single discrete delay, with distributed delay, or with a variable delay is systematically analyzed. We show that a wave instability can appear from an equilibrium of single-species reaction-diffusion systems with fluctuating or distributed delay, which is not possible in similar systems with constant discrete delay or without delay. More precisely, we show by basic analytic arguments and by numerical simulations that fast asymmetric delay fluctuations or asymmetrically distributed delays can lead to wave instabilities in these systems. Examples, for the resulting traveling waves are shown for a Fisher-KPP equation with distributed delay in the reaction term. In addition, we have studied diffusion-induced instabilities from homogeneous periodic orbits in the same systems with variable delay, where the homogeneous periodic orbits are attracting resonant periodic solutions of the system without diffusion, i.e., periodic orbits of the Hutchinson equation with time-varying delay. If diffusion is introduced, standing waves can emerge whose temporal period is equal to the period of the variable delay.

  15. Invariant boxes and stability of some systems from biomathematics and chemical reactions

    International Nuclear Information System (INIS)

    Pavel, N.H.

    1984-08-01

    A general theorem on the flow-invariance of a time-dependent rectangular box with respect to a differential system is first recalled [''Analysis of some non-linear problems'' in Banach Spaces and Applications, Univ. of Iasi (Romania) (1982)]. Then a theorem applicable to the study of some differential systems from biomathematics and chemical reactions is given and proved. The theorem can be applied to enzymatic reactions, the chemical mechanism in the Belousov reaction, and the kinetic system for the chemical scheme of Hanusse of two processes with three intermediate species [in Pavel, N.H., Differential Equations, Flow-invariance and Applications, Pitman Publishing, Ltd., London (to appear)]. Next, the matrices A for which the corresponding linear system x'=Ax is component-wise positive asymptotically stable are characterized. In the Appendix a partial answer to an open problem regarding the preservation of both continuity and dissipativity in the extension of functions to a Banach space is given

  16. Design of the US-CRBRP sodium/water reaction pressure relief system

    International Nuclear Information System (INIS)

    Kruger, G.B.; Murdock, T.B.; Rodwell, E.; Sane, J.O.

    1976-01-01

    Protection against intermediate sodium system overpressure from the sodium/water reaction associated with large leaks within the CRBRP Steam Generators is provided by the sodium/water reaction pressure relief system (SWRPRS). This system consists of rupture disks connected to the intermediate sodium piping adjacent to the inlet to the superheater and outlet from the evaporator modules. The rupture discs relieve into piping that leads to reaction produce separator tanks, which in turn are vented to a centrifugal separator and flare stack arranged to burn hydrogen gas exhausting into the atmosphere. Analyses have been conducted using the TRANSWRAP Computer Code to predict the system pressures and flow rates during the large leak event. Experimental tests to be conducted in the large leak test rig (LLTR) will be used to confirm the analysis techniques used in the design

  17. Numerical simulation of reaction-diffusion systems by modified cubic B-spline differential quadrature method

    International Nuclear Information System (INIS)

    Mittal, R.C.; Rohila, Rajni

    2016-01-01

    In this paper, we have applied modified cubic B-spline based differential quadrature method to get numerical solutions of one dimensional reaction-diffusion systems such as linear reaction-diffusion system, Brusselator system, Isothermal system and Gray-Scott system. The models represented by these systems have important applications in different areas of science and engineering. The most striking and interesting part of the work is the solution patterns obtained for Gray Scott model, reminiscent of which are often seen in nature. We have used cubic B-spline functions for space discretization to get a system of ordinary differential equations. This system of ODE’s is solved by highly stable SSP-RK43 method to get solution at the knots. The computed results are very accurate and shown to be better than those available in the literature. Method is easy and simple to apply and gives solutions with less computational efforts.

  18. Analysis of coupled mass transfer and sol-gel reaction in a two-phase system

    NARCIS (Netherlands)

    Castelijns, H.J.; Huinink, H.P.; Pel, L.; Zitha, P.L.J.

    2006-01-01

    The coupled mass transfer and chemical reactions of a gel-forming compound in a two-phase system were studied in detail. Tetra-methyl-ortho-silicate (TMOS) is often used as a precursor in sol-gel chemistry to produce silica gels in aqueous systems. TMOS can also be mixed with many hydrocarbons

  19. Employee reactions to the use of management control systems in hospitals: motivation vs. threat

    Directory of Open Access Journals (Sweden)

    Ernesto Lopez-Valeiras

    2018-03-01

    Conclusions: The results obtained contribute to creating specific knowledge on the reactions of employees to the use of management control systems in hospitals. This information may be important in adapting management control systems to the characteristics of the hospital and its employees, which may in turn contribute to reducing dysfunctional worker behavior.

  20. Web-Based Search and Plot System for Nuclear Reaction Data

    International Nuclear Information System (INIS)

    Otuka, N.; Nakagawa, T.; Fukahori, T.; Katakura, J.; Aikawa, M.; Suda, T.; Naito, K.; Korennov, S.; Arai, K.; Noto, H.; Ohnishi, A.; Kato, K.

    2005-01-01

    A web-based search and plot system for nuclear reaction data has been developed, covering experimental data in EXFOR format and evaluated data in ENDF format. The system is implemented for Linux OS, with Perl and MySQL used for CGI scripts and the database manager, respectively. Two prototypes for experimental and evaluated data are presented

  1. A Review of Study on Thermal Energy Transport System by Synthesis and Decomposition Reactions of Methanol

    Science.gov (United States)

    Liu, Qiusheng; Yabe, Akira; Kajiyama, Shiro; Fukuda, Katsuya

    The study on thermal energy transport system by synthesis and decomposition reactions of methanol was reviewed. To promote energy conservation and global environment protection, a two-step liquid-phase methanol synthesis process, which starts with carbonylation of methanol to methyl formate, then followed by the hydrogenolysis of the formate, was studied to recover wasted or unused discharged heat from industrial sources for the thermal energy demands of residential and commercial areas by chemical reactions. The research and development of the system were focused on the following three points. (1) Development of low-temperature decomposition and synthetic catalysts, (2) Development of liquid phase reactor (heat exchanger accompanying chemical reaction), (3) Simulation of the energy transport efficiency of entire system which contains heat recovery and supply sections. As the result of the development of catalyst, promising catalysts which agree with the development purposes for the methyl formate decomposition reaction and the synthetic reaction are being developed though some studies remain for the methanol decomposition and synthetic reactions. In the fundamental development of liquid phase reactor, the solubilities of CO and H2 gases in methanol and methyl formate were measured by the method of total pressure decrease due to absorption under pressures up to 1500kPa and temperatures up to 140°C. The diffusivity of CO gas in methanol was determined by measuring the diameter and solution time of single CO bubbles in methanol. The chemical reaction rate of methanol synthesis by hydrogenolysis of methyl formate was measured using a plate-type of Raney copper catalyst in a reactor with rectangular channel and in an autoclave reactor. The reaction characteristics were investigated by carrying out the experiments at various temperatures, flow rates and at various catalyst development conditions. We focused on the effect of Raney copper catalyst thickness on the liquid

  2. New model of chlorine-wall reaction for simulating chlorine concentration in drinking water distribution systems.

    Science.gov (United States)

    Fisher, Ian; Kastl, George; Sathasivan, Arumugam

    2017-11-15

    Accurate modelling of chlorine concentrations throughout a drinking water system needs sound mathematical descriptions of decay mechanisms in bulk water and at pipe walls. Wall-reaction rates along pipelines in three different systems were calculated from differences between field chlorine profiles and accurately modelled bulk decay. Lined pipes with sufficiently large diameters (>500 mm) and higher chlorine concentrations (>0.5 mg/L) had negligible wall-decay rates, compared with bulk-decay rates. Further downstream, wall-reaction rate consistently increased (peaking around 0.15 mg/dm 2 /h) as chlorine concentration decreased, until mass-transport to the wall was controlling wall reaction. These results contradict wall-reaction models, including those incorporated in the EPANET software, which assume wall decay is of either zero-order (constant decay rate) or first-order (wall-decay rate reduces with chlorine concentration). Instead, results are consistent with facilitation of the wall reaction by biofilm activity, rather than surficial chemical reactions. A new model of wall reaction combines the effect of biofilm activity moderated by chlorine concentration and mass-transport limitation. This wall reaction model, with an accurate bulk chlorine decay model, is essential for sufficiently accurate prediction of chlorine residuals towards the end of distribution systems and therefore control of microbial contamination. Implementing this model in EPANET-MSX (or similar) software enables the accurate chlorine modelling required for improving disinfection strategies in drinking water networks. New insight into the effect of chlorine on biofilm can also assist in controlling biofilm to maintain chlorine residuals. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Coupled enzyme reactions performed in heterogeneous reaction media: experiments and modeling for glucose oxidase and horseradish peroxidase in a PEG/citrate aqueous two-phase system.

    Science.gov (United States)

    Aumiller, William M; Davis, Bradley W; Hashemian, Negar; Maranas, Costas; Armaou, Antonios; Keating, Christine D

    2014-03-06

    The intracellular environment in which biological reactions occur is crowded with macromolecules and subdivided into microenvironments that differ in both physical properties and chemical composition. The work described here combines experimental and computational model systems to help understand the consequences of this heterogeneous reaction media on the outcome of coupled enzyme reactions. Our experimental model system for solution heterogeneity is a biphasic polyethylene glycol (PEG)/sodium citrate aqueous mixture that provides coexisting PEG-rich and citrate-rich phases. Reaction kinetics for the coupled enzyme reaction between glucose oxidase (GOX) and horseradish peroxidase (HRP) were measured in the PEG/citrate aqueous two-phase system (ATPS). Enzyme kinetics differed between the two phases, particularly for the HRP. Both enzymes, as well as the substrates glucose and H2O2, partitioned to the citrate-rich phase; however, the Amplex Red substrate necessary to complete the sequential reaction partitioned strongly to the PEG-rich phase. Reactions in ATPS were quantitatively described by a mathematical model that incorporated measured partitioning and kinetic parameters. The model was then extended to new reaction conditions, i.e., higher enzyme concentration. Both experimental and computational results suggest mass transfer across the interface is vital to maintain the observed rate of product formation, which may be a means of metabolic regulation in vivo. Although outcomes for a specific system will depend on the particulars of the enzyme reactions and the microenvironments, this work demonstrates how coupled enzymatic reactions in complex, heterogeneous media can be understood in terms of a mathematical model.

  4. The Correlation of Metacognition with Critical Thinking Skills of Grade XI Students on Human Excretion System Concept

    Directory of Open Access Journals (Sweden)

    Dea Diella

    2017-11-01

    Full Text Available The aims of this study is to reveal metacognition and critical thinking skill of students grade XI, and also the correlation between metacognition with crititical thinking skill on human excretion system. The participants of this study consist of 100 students from grade XI of five different high schools in Tasikmalaya. Correlational method was used in this study. Instruments which used to obtain the data consist of metacognition test and critical thinking test. The students' metacognition was captured with the essay item related to the human excretion system concept. The multiple choice-reason item and essay item was used to capture the critical thinking skills. The results showed that students’ score at metacognition and critical thinking have a low average. The results also proved that metacognition has a positive correlation and moderately strong with critical thinking skills

  5. Construction of a novel, stable, food-grade expression system by engineering the endogenous toxin-antitoxin system in Bacillus subtilis.

    Science.gov (United States)

    Yang, Sen; Kang, Zhen; Cao, Wenlong; Du, Guocheng; Chen, Jian

    2016-02-10

    Bacillus subtilis as an important workhorse that has been widely used to produce enzymes and metabolites. To broaden its applications, especially in the food and feed industry, we constructed a novel, stable, food-grade expression system by engineering its type II toxin-antitoxin system. The expression of the toxin EndoA, encoded by the chromosomal ydcE gene, was regulated by an endogenous, xylose-inducible promoter, while the ydcD gene, which encodes the unstable antitoxin EndoB, was inserted into a food-grade vector backbone, where its expression was driven by the native, constitutive promoter PylxM. By maintaining the xylose concentration above 2.0 g L(-1), this auto-regulated expression system was absolutely stable after 100 generations. Compared with traditional antibiotic-dependent expression systems, this novel expression system resulted in greater biomass and higher titers of desired products (enzymes or metabolites). Our results demonstrate that this stable, food-grade expression system is suitable for enzyme production and pathway engineering, especially for the production of food-grade enzymes and metabolites. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. Goal: A Grading System That Demands Excellence on the Playing Field

    Science.gov (United States)

    Cady, Jennifer R.

    2011-01-01

    Despite the vast array of educational practices that are present in today's society, grading is one practice that has established a historical foundation and one that will continue to be an important aspect to the profession of education. This small scale study determined that both undergraduate and graduate learners, in one college instructor's…

  7. The effect of two grading systems on the performance of medical students during oral examinations

    DEFF Research Database (Denmark)

    Ba-Ali, Shakoor; Jemec, Gregor B E; Sander, Birgit

    2017-01-01

    INTRODUCTION: Either a pass/fail approach or a seven-point grading scale are used to evaluate students at the Danish universities. The aim of this study was to explore any effect of the assessment methods on student performances during oral exams. METHODS: In a prospective study including 1,037 e...

  8. An evaluation of the lamb and mutton carcase grading system in the ...

    African Journals Online (AJOL)

    %), Prima B (57%), Top C .... using a 15- and 18-point scale respectively. ... The average 'car- case thickness' (kg/cm) increased when carcase mass in- creased. This was most evident for carcases in the overfat grades, i.e. Lamb 2, B2 and C2.

  9. Experimental study of peripheral reactions in the 16O +63,65 Cu systems

    International Nuclear Information System (INIS)

    Razeto, G.R.

    1987-01-01

    In this work elastic scattering and ( 16 O,N) ( 16 O,C) transfer reaction data are presented for the 16 O + 63,65 Cu systems at the incident energy range of 40 to 64MeV. The data was analized with the Optical Model, and the total reaction cross section was compared with the fusion cross section data available from a previus work. Furthermore correlation was made between transfer processes with the different optical potential parameters for these systems. The Frahnand Venter fenomelogical modelo and DWBA calculations were employed for analysis of the transfer reaction data. For the 16 O + 63 Cu system beside the threshold anomaly, an atypical angles (θ cm > 140 0 ). The Regge poles ressonances formalism was used to explain it. (author) [pt

  10. Photon- and pion-induced reactions in the few body systems

    International Nuclear Information System (INIS)

    Laget, J.M.

    1985-05-01

    The study of the interplay of the degrees of freedom of the many nuclear system and the internal degrees of freedom of its constituents is reviewed. First nucleon-nucleon interaction mechanisms are recalled in relation to the interaction range. It appears that pion and photon induced reactions should provide two complementary ways to disentangle these various mechanisms. Most of pion and photon induced reactions, performed until now, can be understood in terms of nucleons, pions and deltas. But after a short description of the method of analysis of the reactions it is shown that this agreement is achieved at the price of the adjustment of two parameters (the πNN form factor and the rho-nucleon coupling contant) which may simulate more subtle short range effects. Then the relevance of the analysis of the same reactions in terms of quark degrees of freedom is discussed briefly

  11. Open quantum system approach to the modeling of spin recombination reactions.

    Science.gov (United States)

    Tiersch, M; Steiner, U E; Popescu, S; Briegel, H J

    2012-04-26

    In theories of spin-dependent radical pair reactions, the time evolution of the radical pair, including the effect of the chemical kinetics, is described by a master equation in the Liouville formalism. For the description of the chemical kinetics, a number of possible reaction operators have been formulated in the literature. In this work, we present a framework that allows for a unified description of the various proposed mechanisms and the forms of reaction operators for the spin-selective recombination processes. On the basis of the concept that master equations can be derived from a microscopic description of the spin system interacting with external degrees of freedom, it is possible to gain insight into the underlying microscopic processes and develop a systematic approach toward determining the specific form of the reaction operator in concrete scenarios.

  12. Interplay of break-up and transfer processes in reactions involving weakly-bound systems

    Science.gov (United States)

    Vitturi, Andrea; Moschini, Laura

    2018-02-01

    In this note we illustrate some applications of a simple model which has been devised to clarify the reaction mechanism and the interplay of different reaction channels (elastic, inelastic, transfer, break-up) in heavy-ion collisions. The model involves two potential wells moving in one dimension and few active particles; in spite of its simplicity, it is supposed to maintain the main features, the properties and the physics of the full three-dimensional case. Special attention is given to the role of continuum states in reactions involving weakly-bound systems, and different approximation schemes (as first-order or coupled-channels) as well as different continuum discretization procedures are tested. In the case of two active particles the reaction mechanism associated with two-particle transfer and the effect of pairing intearction are investigated. Work done in collaboration with Antonio Moro and Kouichi Hagino

  13. On the ambiguity of the reaction rate constants in multivariate curve resolution for reversible first-order reaction systems.

    Science.gov (United States)

    Schröder, Henning; Sawall, Mathias; Kubis, Christoph; Selent, Detlef; Hess, Dieter; Franke, Robert; Börner, Armin; Neymeyr, Klaus

    2016-07-13

    If for a chemical reaction with a known reaction mechanism the concentration profiles are accessible only for certain species, e.g. only for the main product, then often the reaction rate constants cannot uniquely be determined from the concentration data. This is a well-known fact which includes the so-called slow-fast ambiguity. This work combines the question of unique or non-unique reaction rate constants with factor analytic methods of chemometrics. The idea is to reduce the rotational ambiguity of pure component factorizations by considering only those concentration factors which are possible solutions of the kinetic equations for a properly adapted set of reaction rate constants. The resulting set of reaction rate constants corresponds to those solutions of the rate equations which appear as feasible factors in a pure component factorization. The new analysis of the ambiguity of reaction rate constants extends recent research activities on the Area of Feasible Solutions (AFS). The consistency with a given chemical reaction scheme is shown to be a valuable tool in order to reduce the AFS. The new methods are applied to model and experimental data. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. Non-Toxic Orbiter Maneuvering System (OMS) and Reaction Control System

    Science.gov (United States)

    Hurlbert, Eric A.; Nicholson, Leonard S. (Technical Monitor)

    1999-01-01

    NASA is pursuing the technology and advanced development of a non-toxic (NT) orbital maneuvering system (OMS) and reaction control system (RCS) for shuttle upgrades, RLV, and reusable first stages. The primary objectives of the shuttle upgrades program are improved safety, improved reliability, reduced operations time and cost, improved performance or capabilities, and commonality with future space exploration needs. Non-Toxic OMS/RCS offers advantages in each of these categories. A non-toxic OMS/RCS eliminates the ground hazards and the flight safety hazards of the toxic and corrosive propellants. The cost savings for ground operations are over $24M per year for 7 flights, and the savings increase with increasing flight rate up to $44M per year. The OMS/RCS serial processing time is reduced from 65 days to 13 days. The payload capability can be increased up to 5100 Ibms. The non-toxic OMS/RCS also provides improved space station reboost capability up to 20 nautical miles over the current toxic system of 14 nautical miles. A NT OMS/RCS represents a clear advancement in the SOA over MMH/NTO. Liquid oxygen and ethanol are clean burning, high-density propellants that provide a high degree of commonality with other spacecraft subsystems including life support, power, and thermal control, and with future human exploration and development of space missions. The simple and reliable pressure-fed design uses sub-cooled liquid oxygen at 250 to 350 psia, which allows a propellant to remain cryogenic for longer periods of time. The key technologies are thermal insulation and conditioning techniques are used to maintain the sub-cooling. Phase I successfully defined the system architecture, designed an integrated OMS/RCS propellant tank, analyzed the feed system, built and tested the 870 lbf RCS thrusters, and tested the 6000 lbf OMS engine. Phase 11 is currently being planned for the development and test of full-scale prototype of the system in 1999 and 2000

  15. Waterhammer modeling for the Ares I Upper Stage Reaction Control System cold flow development test article

    Science.gov (United States)

    Williams, Jonathan Hunter

    The Upper Stage Reaction Control System provides in-flight three-axis attitude control for the Ares I Upper Stage. The system design must accommodate rapid thruster firing to maintain proper launch trajectory and thus allow for the possibility to pulse multiple thrusters simultaneously. Rapid thruster valve closure creates an increase in static pressure, known as waterhammer, which propagates throughout the propellant system at pressures exceeding nominal design values. A series of development tests conducted at Marshall Space Flight Center in 2009 were performed using a water-flow test article to better understand fluid characteristics of the Upper Stage Reaction Control System. A subset of the tests examined the waterhammer pressure and frequency response in the flight-representative system and provided data to anchor numerical models. This thesis presents a comparison of waterhammer test results with numerical model and analytical results. An overview of the flight system, test article, modeling and analysis are also provided.

  16. The entropy dissipation method for spatially inhomogeneous reaction-diffusion-type systems

    KAUST Repository

    Di Francesco, M.

    2008-12-08

    We study the long-time asymptotics of reaction-diffusion-type systems that feature a monotone decaying entropy (Lyapunov, free energy) functional. We consider both bounded domains and confining potentials on the whole space for arbitrary space dimensions. Our aim is to derive quantitative expressions for (or estimates of) the rates of convergence towards an (entropy minimizing) equilibrium state in terms of the constants of diffusion and reaction and with respect to conserved quantities. Our method, the so-called entropy approach, seeks to quantify convergence to equilibrium by using functional inequalities, which relate quantitatively the entropy and its dissipation in time. The entropy approach is well suited to nonlinear problems and known to be quite robust with respect to model variations. It has already been widely applied to scalar diffusion-convection equations, and the main goal of this paper is to study its generalization to systems of partial differential equations that contain diffusion and reaction terms and admit fewer conservation laws than the size of the system. In particular, we successfully apply the entropy approach to general linear systems and to a nonlinear example of a reaction-diffusion-convection system arising in solid-state physics as a paradigm for general nonlinear systems. © 2008 The Royal Society.

  17. HELP: a model for evaluating the feasibility of using various chemical reaction systems as electronic lasers

    Energy Technology Data Exchange (ETDEWEB)

    Herbelin, J M; Cohen, N

    1975-09-01

    An analytical model for estimating the minimum requirements of a chemically pumped electronic laser is developed. From a knowledge of the basic spectroscopic and thermodynamic properties of a particular reaction, the model can quickly classify the system in accordance with the feasibility of generating stimulated emission at different possible wavelengths. Sample calculations of the reactions of barium atoms with nitrous oxide and nitrogen dioxide indicate that the model is sufficiently sensitive to distinguish between very similar systems and, therefore, should be useful in providing classification criteria in the search for a chemically pumped electronic laser.

  18. Clinical significance of a proposed lymphoscintigrpahic functional grade system in patients with extremity lymphedema of stage i

    International Nuclear Information System (INIS)

    Choi, Joan Young; Hwang, Ji Hye; Kim, Dong Ik; Cho, Young Seok; Lee, Su Jin; Choi, Yong; Choe, Yeam Seong; Lee, Kyung Han; Kim, Byung Tae

    2005-01-01

    We proposed a new lymphoscintigrpahic functional grade (LGr) system in extremity lymphedema, and investigated the association between the LGr and a long-term response to physical therapy in patients with extremity lymphedema of stage I. The subjects were 20 patients with unilateral extremity lymphedema of stage I, who underwent pre-treatment extremity lymphoscintigraphy using Tc-99m antimony sulfur colloid, and were treated by complex decongestive physical therapy (CDPT). A proposed lymphoscintigrpahic functional grade system consisted of LGr 0 to LGr 4 according to the ilioinguinal nodal uptake, amount of dermal backflow, and uptake pattern of main and collateral lymphatics : LGr 0 = normal, LGr 1 = decreased lymphatic function without dermal backflow, LGr 2 = decreased lymphatic function with dermal backflow, LGr 3 = non - visualization of main lymphatics with dermal backflow, and LGr 4 = no significant lymphatic transport from injection site. LGr 2 was divided into 2A and 2B based on the amount of dermal backflow. A physician who is a lymphedema specialist determined the long-term outcome to CDPT with normalized response (NR), good response (GR) and poor response (PR) based on the change of edema volume reduction, skin status and occurrence of dermatolymphangioadenitis after the clinical follow-up for more than 1 year. Therapeutic responses were NR in 2 patients. GR in 9 patients and PR in 9 patients. Baseline LGrs were 1 in 7 patients, 2A in 4 patients, 2B in 5 patients, 3 in 2 patients, and 4 in 2 patients. There was a significant relationship between therapeutic response and LGr (p=0.003). In other words, 10 of 11 patients (91%) with LGr 1 or 2A showed NR. or GR. On the contrary, 8 of 9 patients (89%) with LGr 2B, 3 or 4 showed PR. Patients with unilateral extremity lymphedema of stage I had different lymphoscintigrpahic functional grades. This grade system may be useful to predict the response to physical therapy in such patients

  19. Clinical significance of a proposed lymphoscintigrpahic functional grade system in patients with extremity lymphedema of stage i

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Joan Young; Hwang, Ji Hye; Kim, Dong Ik; Cho, Young Seok; Lee, Su Jin; Choi, Yong; Choe, Yeam Seong; Lee, Kyung Han; Kim, Byung Tae [Samsung Medical Center, Sungkyunkwan University School of Medicine, Seoul (Korea, Republic of)

    2005-07-01

    We proposed a new lymphoscintigrpahic functional grade (LGr) system in extremity lymphedema, and investigated the association between the LGr and a long-term response to physical therapy in patients with extremity lymphedema of stage I. The subjects were 20 patients with unilateral extremity lymphedema of stage I, who underwent pre-treatment extremity lymphoscintigraphy using Tc-99m antimony sulfur colloid, and were treated by complex decongestive physical therapy (CDPT). A proposed lymphoscintigrpahic functional grade system consisted of LGr 0 to LGr 4 according to the ilioinguinal nodal uptake, amount of dermal backflow, and uptake pattern of main and collateral lymphatics : LGr 0 = normal, LGr 1 = decreased lymphatic function without dermal backflow, LGr 2 = decreased lymphatic function with dermal backflow, LGr 3 = non - visualization of main lymphatics with dermal backflow, and LGr 4 = no significant lymphatic transport from injection site. LGr 2 was divided into 2A and 2B based on the amount of dermal backflow. A physician who is a lymphedema specialist determined the long-term outcome to CDPT with normalized response (NR), good response (GR) and poor response (PR) based on the change of edema volume reduction, skin status and occurrence of dermatolymphangioadenitis after the clinical follow-up for more than 1 year. Therapeutic responses were NR in 2 patients. GR in 9 patients and PR in 9 patients. Baseline LGrs were 1 in 7 patients, 2A in 4 patients, 2B in 5 patients, 3 in 2 patients, and 4 in 2 patients. There was a significant relationship between therapeutic response and LGr (p=0.003). In other words, 10 of 11 patients (91%) with LGr 1 or 2A showed NR. or GR. On the contrary, 8 of 9 patients (89%) with LGr 2B, 3 or 4 showed PR. Patients with unilateral extremity lymphedema of stage I had different lymphoscintigrpahic functional grades. This grade system may be useful to predict the response to physical therapy in such patients.

  20. Problem of designing composite systems with allowance for reactions between phases

    International Nuclear Information System (INIS)

    Seredenko, V.N.; Yatsko, B.G.

    1986-01-01

    The authors study the effect of interphase chemical reactions on the formation of a composite, determine its corrected mechanical characteristics, and subsequently study the stress-strain state of the composite system in the presence of interphase structures. Specific examples of composite systems with a titanium matrix and reinforcing boron fibers are examined. Two cases are considered, the fibers have or do not have a coating of silicon carbide. Graphs illustrate the stress concentration for the boron-titanium composite system

  1. Catalyst Initiation in the Oscillatory Carbonylation Reaction

    Directory of Open Access Journals (Sweden)

    Katarina Novakovic

    2011-01-01

    Full Text Available Palladium(II iodide is used as a catalyst in the phenylacetylene oxidative carbonylation reaction that has demonstrated oscillatory behaviour in both pH and heat of reaction. In an attempt to extract the reaction network responsible for the oscillatory nature of this reaction, the system was divided into smaller parts and they were studied. This paper focuses on understanding the reaction network responsible for the initial reactions of palladium(II iodide within this oscillatory reaction. The species researched include methanol, palladium(II iodide, potassium iodide, and carbon monoxide. Several chemical reactions were considered and applied in a modelling study. The study revealed the significant role played by traces of water contained in the standard HPLC grade methanol used.

  2. System Identification for Experimental Study for Polymerization Catalyst Reaction in Fluidized Bed

    Directory of Open Access Journals (Sweden)

    Ahmmed Saadi Ibrehem

    2011-11-01

    Full Text Available In this work, system identification method is used to capture the reactor characteristics of production rate of polyethylene (PE based on published experimental data. The identification method is used to measure the percentage effect on the production rate of PE by measuring the effect of input factors of temperature of reaction, hydrogen concentration, and [Al]/[Ti] molar catalyst ratio. Temperature of reaction has big effects equal 52.4 % on the output of the system and 47.6 % on interaction of the system's parameters compare to other two factors. Also, hydrogen concentration has big effect equal 45.66 % on the output of the system and 14.7 % on interaction of the system's parameters. [Al]/[Ti] molar catalyst ratio has big effect on interaction of the system equal 28.6 and 1.94 % on the output of the system but less than the reaction temperature and hydrogen concentration. All these results depend on experiment results and these results are very important in industrial plants. ©2011 BCREC UNDIP. All rights reserved(Received: 13rd May 2011; Revised: 27th July 2011; Accepted: 22th September 2011[How to Cite: Ahmmed S. Ibrehem. (2011. System Identification for Experimental Study for Polymerization Catalyst Reaction in Fluidized Bed. Bulletin of Chemical Reaction Engineering & Catalysis, 6 (2: 137-146. doi:10.9767/bcrec.6.2.874.137-146][How to Link / DOI: http://dx,doi.org/10.9767/bcrec.6.2.874.137-146 || or local:  http://ejournal.undip.ac.id/index.php/bcrec/article/view/874 ] | View in 

  3. Reaction mechanisms in the radiolysis of peptides, polypeptides and proteins II reactions at side-chain loci in model systems

    International Nuclear Information System (INIS)

    Garrison, W.M.

    1983-11-01

    The major emphasis in radiation biology at the molecular level has been on the nucleic acid component of the nucleic acid-protein complex because of its primary genetic importance. But there is increasing evidence that radiation damage to the protein component also has important biological implications. Damage to capsid protein now appears to be a major factor in the radiation inactivation of phage and other viruses. And, there is increasing evidence that radiation-chemical change in the protein component of chromation leads to changes in the stability of the repressor-operator complexes involved in gene expression. Knowledge of the radiation chemistry of protein is also of importance in other fields such as the application of radiation sterilization to foods and drugs. Recent findings that a class of compounds, the α,α'-diaminodicarboxylic acids, not normally present in food proteins, are formed in protein radiolysis is of particular significance since certain of their peptide derivatives have been showing to exhibit immunological activity. The purpose of this review is to bring together and to correlate our present knowledge of products and mechanisms in the radiolysis of peptides, polypeptides and proteins both aqueous and solid-state. In part 1 we presented a discussion of the radiation-induced reactions of the peptide main-chain in model peptide and polypeptide systems. Here in part 2 the emphasis is on the competing radiation chemistry at side-chain loci of peptide derivatives of aliphatic, aromatic-unsaturated and sulfur-containing amino acids in similar systems. Information obtained with the various experimental techniques of product analysis, competition kinetics, spin-trapping, pulse radiolysis, and ESR spectroscopy are included

  4. Readmission after treatment of Grade 3 and 4 renal injuries at a Level I trauma center: Statewide assessment using the Comprehensive Hospital Abstract Reporting System.

    Science.gov (United States)

    Winters, Brian; Wessells, Hunter; Voelzke, Bryan B

    2016-03-01

    One criticism of the existing renal trauma research is the limited outpatient follow-up after index hospitalization. We assessed readmission rates following treatment for American Association for the Surgery of Trauma (AAST) Grade 3 and 4 renal injury using the Comprehensive Hospital Abstract Reporting System (CHARS). We evaluated all patients with AAST Grade 3 and 4 renal injuries admitted to Harborview Medical Center (HMC) between 1998 and 2010, the only Level 1 trauma center in Washington state. Grade 4 renal injuries were stratified by collecting system laceration (CSL) or segmental vascular injury. Data were abstracted from the CHARS database for readmissions to any Washington state hospital within 6 months of renal injury. Clinical variables, diagnoses, and procedures were queried based on DRG International Classification of Diseases-9th Rev. codes. A total of 477 Grade 3 and 159 Grade 4 renal injuries were initially treated at HMC. On admission, 111 patients required intervention: 75 (16%) of 477 Grade 3 and 36 (23%) of 159 Grade 4 injuries. Within 6 months of index hospitalization, 86 (18%) of 477 Grade 3 and 38 (24%) of 159 Grade 4 patients were readmitted to any Washington state hospital. Eighty percent of Grade 3 injuries and 66% of Grade 4 injuries returned to HMC compared with secondary hospitals (p = 0.08). At readmission, 19 (22%) of 86 Grade 3 and 16 (42%) of 38 Grade 4 injuries had a urologic diagnosis. Subsequent procedural intervention was required on readmission in 6 (7%) of 86 Grade 3 and 5 (13%) of 38 Grade 4 renal injuries (all CSL injuries). A subset of patients treated for Grade 3 and 4 renal trauma will be readmitted for further management. While urologic diagnoses and additional procedures may be low overall, readmission to outside hospitals may preclude accurate determination of renal trauma outcomes. Based on these data, patients with Grade 4 CSL injuries seem to be at the highest risk for readmission and to require a subsequent

  5. Massachusetts Early Warning Indicator System (EWIS). "Technical Descriptions of Risk Model Development": Middle and High School Age Groupings (Grades 7-12)

    Science.gov (United States)

    Massachusetts Department of Elementary and Secondary Education, 2013

    2013-01-01

    The Massachusetts Department of Elementary and Secondary Education (Department) created the grades 1-12 Early Warning Indicator System (EWIS) in response to district interest in the Early Warning Indicator Index (EWII) that the Department previously created for rising grade 9 students. Districts shared that the EWII data were helpful, but also…

  6. Massachusetts Early Warning Indicator System (EWIS). "Technical Descriptions of Risk Model Development": Early and Late Elementary Age Groupings (Grades 1-6)

    Science.gov (United States)

    Massachusetts Department of Elementary and Secondary Education, 2013

    2013-01-01

    The Massachusetts Department of Elementary and Secondary Education (Department) created the grades 1-12 Early Warning Indicator System (EWIS) in response to district interest in the Early Warning Indicator Index (EWII) that the Department previously created for rising grade 9 students. Districts shared that the EWII data were helpful, but also…

  7. Histological grading of papillary urothelial carcinoma of the bladder: prognostic value of the 1998 WHO/ISUP classification system and comparison with conventional grading systems

    NARCIS (Netherlands)

    Oosterhuis, J. W. A.; Schapers, R. F. M.; Janssen-Heijnen, M. L. G.; Pauwels, R. P. E.; Newling, D. W.; ten Kate, F.

    2002-01-01

    AIM: To test the prognostic value of the 1998 WHO/ISUP (World Health Organisation/International Society of Urologic Pathology) consensus classification system in Ta papillary urothelial neoplasms of the bladder. METHODS: The histological slides of 322 patients with a primary Ta tumour were

  8. Exact substitute processes for diffusion-reaction systems with local complete exclusion rules

    International Nuclear Information System (INIS)

    Schulz, Michael; Reineker, Peter

    2005-01-01

    Lattice systems with one species diffusion-reaction processes under local complete exclusion rules are studied analytically starting from the usual master equations with discrete variables and their corresponding representation in a Fock space. On this basis, a formulation of the transition probability as a Grassmann path integral is derived in a straightforward manner. It will be demonstrated that this Grassmann path integral is equivalent to a set of Ito stochastic differential equations. Averages of arbitrary variables and correlation functions of the underlying diffusion-reaction system can be expressed as weighted averages over all solutions of the system of stochastic differential equations. Furthermore, these differential equations are equivalent to a Fokker-Planck equation describing the probability distribution of the actual Ito solutions. This probability distribution depends on continuous variables in contrast to the original master equation, and their stochastic dynamics may be interpreted as a substitute process which is completely equivalent to the original lattice dynamics. Especially, averages and correlation functions of the continuous variables are connected to the corresponding lattice quantities by simple relations. Although the substitute process for diffusion-reaction systems with exclusion rules has some similarities to the well-known substitute process for the same system without exclusion rules, there exists a set of remarkable differences. The given approach is not only valid for the discussed single-species processes. We give sufficient arguments to show that arbitrary combinations of unimolecular and bimolecular lattice reactions under complete local exclusions may be described in terms of our approach

  9. The urgent need for a harmonized severity scoring system for acute allergic reactions

    DEFF Research Database (Denmark)

    Muraro, Antonella; Fernandez-Rivas, Montserrat; Beyer, Kirsten

    2018-01-01

    The accurate assessment and communication of the severity of acute allergic reactions is important to patients, clinicians, researchers, the food industry, public health and regulatory authorities. Severity has different meanings to different stakeholders with patients and clinicians rating...... of different stakeholder groups. We propose a novel approach to develop and then validate a harmonized scoring system for acute allergic reactions, based on a data-driven method that is informed by clinical and patient experience and other stakeholders' perspectives. We envisage two formats: (i) a numerical...... the significance of particular symptoms very differently. Many severity scoring systems have been generated, most focusing on the severity of reactions following exposure to a limited group of allergens. They are heterogeneous in format, none has used an accepted developmental approach and none has been validated...

  10. Thermochemical study of deuterium exchange reactions in water-alcohol and alcohol-alcohol systems

    International Nuclear Information System (INIS)

    Khurma, J.R.; Fenby, D.V.

    1979-01-01

    Molar excess enthalpies of water-alcohol systems have been analyzed to give equilibrium constants and enthalpies of the reactions 2ROH + D 2 O = 2ROD + H 2 O (R = CH 3 , C 2 H 5 , n-C 3 H 7 ). The equilibrium constants are significantly greater than the ''random'' value. Molar excess enthalpies of alcohol-alcohol systems have been analyzed to give enthalpies of reactions ROH + R'OD = ROD + R'OH. The enthalpies of water-alcohol and alcohol-alcohol exchange reactions form a self-consistent set and are in good agreement with values from earlier studies. Molar excess enthalpies at 298.15 K are reported for n-C 3 H 7 OH and n-C 3 H 7 OD with H 2 O, D 2 O, CH 3 OH, CH 3 OD, C 2 H 5 OH, and C 2 H 5 OD

  11. Chemical reaction of hexagonal boron nitride and graphite nanoclusters in mechanical milling systems

    Energy Technology Data Exchange (ETDEWEB)

    Muramatsu, Y.; Grush, M.; Callcott, T.A. [Univ. of Tennessee, Knoxville, TN (United States)] [and others

    1997-04-01

    Synthesis of boron-carbon-nitride (BCN) hybrid alloys has been attempted extensively by many researchers because the BCN alloys are considered an extremely hard material called {open_quotes}super diamond,{close_quotes} and the industrial application for wear-resistant materials is promising. A mechanical alloying (MA) method of hexagonal boron nitride (h-BN) with graphite has recently been studied to explore the industrial synthesis of the BCN alloys. To develop the MA method for the BCN alloy synthesis, it is necessary to confirm the chemical reaction processes in the mechanical milling systems and to identify the reaction products. Therefore, the authors have attempted to confirm the chemical reaction process of the h-BN and graphite in mechanical milling systems using x-ray absorption near edge structure (XANES) methods.

  12. Chemical reaction of hexagonal boron nitride and graphite nanoclusters in mechanical milling systems

    International Nuclear Information System (INIS)

    Muramatsu, Y.; Grush, M.; Callcott, T.A.

    1997-01-01

    Synthesis of boron-carbon-nitride (BCN) hybrid alloys has been attempted extensively by many researchers because the BCN alloys are considered an extremely hard material called open-quotes super diamond,close quotes and the industrial application for wear-resistant materials is promising. A mechanical alloying (MA) method of hexagonal boron nitride (h-BN) with graphite has recently been studied to explore the industrial synthesis of the BCN alloys. To develop the MA method for the BCN alloy synthesis, it is necessary to confirm the chemical reaction processes in the mechanical milling systems and to identify the reaction products. Therefore, the authors have attempted to confirm the chemical reaction process of the h-BN and graphite in mechanical milling systems using x-ray absorption near edge structure (XANES) methods

  13. Multiscale simulations of patchy particle systems combining Molecular Dynamics, Path Sampling and Green's Function Reaction Dynamics

    Science.gov (United States)

    Bolhuis, Peter

    Important reaction-diffusion processes, such as biochemical networks in living cells, or self-assembling soft matter, span many orders in length and time scales. In these systems, the reactants' spatial dynamics at mesoscopic length and time scales of microns and seconds is coupled to the reactions between the molecules at microscopic length and time scales of nanometers and milliseconds. This wide range of length and time scales makes these systems notoriously difficult to simulate. While mean-field rate equations cannot describe such processes, the mesoscopic Green's Function Reaction Dynamics (GFRD) method enables efficient simulation at the particle level provided the microscopic dynamics can be integrated out. Yet, many processes exhibit non-trivial microscopic dynamics that can qualitatively change the macroscopic behavior, calling for an atomistic, microscopic description. The recently developed multiscale Molecular Dynamics Green's Function Reaction Dynamics (MD-GFRD) approach combines GFRD for simulating the system at the mesocopic scale where particles are far apart, with microscopic Molecular (or Brownian) Dynamics, for simulating the system at the microscopic scale where reactants are in close proximity. The association and dissociation of particles are treated with rare event path sampling techniques. I will illustrate the efficiency of this method for patchy particle systems. Replacing the microscopic regime with a Markov State Model avoids the microscopic regime completely. The MSM is then pre-computed using advanced path-sampling techniques such as multistate transition interface sampling. I illustrate this approach on patchy particle systems that show multiple modes of binding. MD-GFRD is generic, and can be used to efficiently simulate reaction-diffusion systems at the particle level, including the orientational dynamics, opening up the possibility for large-scale simulations of e.g. protein signaling networks.

  14. Analysis of diffusivity of the oscillating reaction components in a microreactor system

    Directory of Open Access Journals (Sweden)

    Martina Šafranko

    2017-01-01

    Full Text Available When performing oscillating reactions, periodical changes in the concentrations of reactants, intermediaries, and products take place. Due to the mentioned periodical changes of the concentrations, the information about the diffusivity of the components included into oscillating reactions is very important for the control of the oscillating reactions. Non-linear dynamics makes oscillating reactions very interesting for analysis in different reactor systems. In this paper, the analysis of diffusivity of the oscillating reaction components was performed in a microreactor, with the aim of identifying the limiting component. The geometry of the microreactor microchannel and a well defined flow profile ensure optimal conditions for the diffusion phenomena analysis, because diffusion profiles in a microreactor depend only on the residence time. In this paper, the analysis of diffusivity of the oscillating reaction components was performed in a microreactor equipped with 2 Y-shape inlets and 2 Y-shape outlets, with active volume of V = 4 μL at different residence times.

  15. Supporting second grade lower secondary school students’ understanding of linear equation system in two variables using ethnomathematics

    Science.gov (United States)

    Nursyahidah, F.; Saputro, B. A.; Rubowo, M. R.

    2018-03-01

    The aim of this research is to know the students’ understanding of linear equation system in two variables using Ethnomathematics and to acquire learning trajectory of linear equation system in two variables for the second grade of lower secondary school students. This research used methodology of design research that consists of three phases, there are preliminary design, teaching experiment, and retrospective analysis. Subject of this study is 28 second grade students of Sekolah Menengah Pertama (SMP) 37 Semarang. The result of this research shows that the students’ understanding in linear equation system in two variables can be stimulated by using Ethnomathematics in selling buying tradition in Peterongan traditional market in Central Java as a context. All of strategies and model that was applied by students and also their result discussion shows how construction and contribution of students can help them to understand concept of linear equation system in two variables. All the activities that were done by students produce learning trajectory to gain the goal of learning. Each steps of learning trajectory of students have an important role in understanding the concept from informal to the formal level. Learning trajectory using Ethnomathematics that is produced consist of watching video of selling buying activity in Peterongan traditional market to construct linear equation in two variables, determine the solution of linear equation in two variables, construct model of linear equation system in two variables from contextual problem, and solving a contextual problem related to linear equation system in two variables.

  16. Adverse drug reactions reported by consumers for nervous system medications in Europe 2007 to 2011

    DEFF Research Database (Denmark)

    Aagaard, Lise; Hansen, Ebba Holme

    2013-01-01

    Reporting of adverse drug reactions (ADRs) has traditionally been the sole province of healthcare professionals. In the European Union, more countries have allowed consumers to report ADRs directly to the regulatory agencies. The aim of this study was to characterize ADRs reported by European...... consumer for nervous system medications....

  17. Degree, instability and bifurcation of reaction-diffusion systems with obstacles near certain hyperbolas

    Czech Academy of Sciences Publication Activity Database

    Eisner, J.; Väth, Martin

    2016-01-01

    Roč. 135, April (2016), s. 158-193 ISSN 0362-546X Institutional support: RVO:67985840 Keywords : reaction-diffusion system * turing instability * global bifurcation Subject RIV: BA - General Mathematics Impact factor: 1.192, year: 2016 http://www.sciencedirect.com/science/article/pii/S0362546X16000146

  18. Stripping reactions in a three-body system. Comparison of DWBA and exact solutions

    International Nuclear Information System (INIS)

    Brinati, J.R.

    1976-01-01

    Stripping reactions 'a estados no continuo' are studied in a three particle system. Since the three-body problem has an exact treatment, comparison will be made between the exact solution and the DWBA model solution. This problem is more complex in the continuous case, as shown in the convergence problem of the standard DWBA amplitude radial integral

  19. Nuclear reactions of the system 6 Li on 58 Ni near the Coulomb barrier

    International Nuclear Information System (INIS)

    Lizcano, D.; Aguilera, E.F.; Garcia M, H.; Martinez Q, E.

    2004-01-01

    Protons, alpha particles and deuterons coming from the reactions 6 Li + 58 Ni are detected to three different energy around the Coulomb barrier. The possible effects of the weakly bound character of the projectile are studied and the results are compared with previous data for the system 6 Li + 59 Co. (Author)

  20. Phase space conduits for reaction in multidimensional systems : HCN isomerization in three dimensions

    NARCIS (Netherlands)

    Waalkens, Holger; Burbanks, Andrew; Wiggins, Stephen

    2004-01-01

    The three-dimensional hydrogen cyanide/isocyanide isomerization problem is taken as an example to present a general theory for computing the phase space structures which govern classical reaction dynamics in systems with an arbitrary (finite) number of degrees of freedom. The theory, which is

  1. A Systematic Approach for the Design and Analysis of Reaction-Separation Systems with Recycle

    DEFF Research Database (Denmark)

    Gani, Rafiqul; Jimenez, Edgar Ramirez

    2004-01-01

    This paper presents a methodology for a systematic model-based analysis and the results obtained from it for an integrated design and analysis of reaction-separation systems with recycle. The methodology (systematic approach) consists of three stages where stage 1 identifies the limiting values...

  2. On the graph and systems analysis of reversible chemical reaction networks with mass action kinetics

    NARCIS (Netherlands)

    Rao, Shodhan; Jayawardhana, Bayu; Schaft, Arjan van der

    2012-01-01

    Motivated by the recent progresses on the interplay between the graph theory and systems theory, we revisit the analysis of reversible chemical reaction networks described by mass action kinetics by reformulating it using the graph knowledge of the underlying networks. Based on this formulation, we

  3. Thermochemical Heat Storage: from Reaction Storage Density to System Storage Density

    NARCIS (Netherlands)

    Jong, A.J. de; Vliet, L.D. van; Hoegaerts, C.L.G.; Roelands, C.P.M.; Cuypers, R.

    2016-01-01

    Long-term and compact storage of solar energy is crucial for the eventual transition to a 100% renewable energy economy. For this, thermochemical materials provide a promising solution. The compactness of a long-term storage system is determined by the thermochemical reaction, operating conditions,

  4. Toward a Kinetic Model for Acrylamide Formation in a Glucose-Asparagine Reaction System

    NARCIS (Netherlands)

    Knol, J.J.; Loon, W.A.M.; Linssen, J.P.H.; Ruck, A.L.; Boekel, van M.A.J.S.

    2005-01-01

    A kinetic model for the formation of acrylamide in a glucose-asparagine reaction system is pro-posed. Equimolar solutions (0.2 M) of glucose and asparagine were heated at different tempera-tures (120-200 C) at pH 6.8. Besides the reactants, acrylamide, fructose, and melanoidins were quantified after

  5. Library of neutron reaction cross-sections in the ABBN-93 constant system

    International Nuclear Information System (INIS)

    Zabrodskaya, S.V.; Korchagina, Zh.A.; Koshcheev, V.N.; Nikolaev, M.N.; Tsibulya, A.M.

    2001-01-01

    The library of neutron reaction group cross-sections in the ABBN-93 constant set is described. The format used for data representation, the content and purpose of the sub-libraries and their practical application in the SCALE criticality safety estimation system are discussed. (author)

  6. Characterization and reactions of a Salix extractive with a unique ring system

    Science.gov (United States)

    Lawrence Landucci; Sally Ralph; Kolby Hirth

    2003-01-01

    An extractive compound with a novel ring system was isolated from the wood of Salix alba and was given the name Salucci. The compound was primarily identified from the 1D NMR, 2D NMR and LC-MSMS data and the structure investigated through reactions and derivatizations.

  7. Identification of neuropathic pain in patients with neck/upper limb pain: application of a grading system and screening tools.

    Science.gov (United States)

    Tampin, Brigitte; Briffa, Noelle Kathryn; Goucke, Roger; Slater, Helen

    2013-12-01

    The Neuropathic Pain Special Interest Group (NeuPSIG) of the International Association for the Study of Pain has proposed a grading system for the presence of neuropathic pain (NeP) using the following categories: no NeP, possible, probable, or definite NeP. To further evaluate this system, we investigated patients with neck/upper limb pain with a suspected nerve lesion, to explore: (i) the clinical application of this grading system; (ii) the suitability of 2 NeP questionnaires (Leeds Assessment of Neuropathic Symptoms and Signs pain scale [LANSS] and the painDETECT questionnaire [PD-Q]) in identifying NeP in this patient cohort; and (iii) the level of agreement in identifying NeP between the NeuPSIG classification system and 2 NeP questionnaires. Patients (n = 152; age 52 ± 12 years; 53% male) completed the PD-Q and LANSS questionnaire and underwent a comprehensive clinical examination. The NeuPSIG grading system proved feasible for application in this patient cohort, although it required considerable time and expertise. Both questionnaires failed to identify a large number of patients with clinically classified definite NeP (LANSS sensitivity 22%, specificity 88%; PD-Q sensitivity 64%, specificity 62%). These lowered sensitivity scores contrast with those from the original PD-Q and LANSS validation studies and may reflect differences in the clinical characteristics of the study populations. The diagnostic accuracy of LANSS and PD-Q for the identification of NeP in patients with neck/upper limb pain appears limited. Copyright © 2013 International Association for the Study of Pain. Published by Elsevier B.V. All rights reserved.

  8. Kinetics of isotope exchange reactions involving intra- and intermolecular reactions: 1. Rate law for a system with two chemical compounds and three exchangeable atoms

    International Nuclear Information System (INIS)

    Xuelei Chu; Ohmoto, Hiroshi

    1991-01-01

    For an isotopic exchange reaction between two compounds (X and AB) in a homogeneous system, such as a gaseous or aqueous system, where one (AB) of them possesses two exchangeable atoms in non-equivalent positions and where one intramolecular isotope exchange (A ↔ B) and two intermolecular isotope exchange reactions (X ↔ A and X ↔ B) may occur, its rate law no longer obeys a pseudo-first order rate equation described for simple two-component systems by many previous investigators. The change with time of the δ value of each of the three components (X, A, and B) in a closed and homogeneous system is a complicated function of the initial δ values of the three components, the chemical concentrations of the two compounds, and the overall rate constants of the forward and reverse reactions involving the two intermolecular and one intramolecular reactions of isotope exchanges. Also, for some one of the three components, the change of its δ value with time may not be monotonic, and the relationship of 1n (1 - F) with time may be non-linear in a plot of 1n (1 - F) vs. t. In addition, the rate law of the isotope exchange reaction in this system also provides a quantitative method to estimate the overall rate constants for the one-intra-and two intermolecular isotope exchanges and the equilibrium isotopic fractionation factors among the three components

  9. Convergence to Equilibrium in Energy-Reaction-Diffusion Systems Using Vector-Valued Functional Inequalities

    Science.gov (United States)

    Mielke, Alexander; Mittnenzweig, Markus

    2018-04-01

    We discuss how the recently developed energy dissipation methods for reaction diffusion systems can be generalized to the non-isothermal case. For this, we use concave entropies in terms of the densities of the species and the internal energy, where the importance is that the equilibrium densities may depend on the internal energy. Using the log-Sobolev estimate and variants for lower-order entropies as well as estimates for the entropy production of the nonlinear reactions, we give two methods to estimate the relative entropy by the total entropy production, namely a somewhat restrictive convexity method, which provides explicit decay rates, and a very general, but weaker compactness method.

  10. Incomplete fusion reactions in 16O+159Tb system: Spin distribution measurements

    Directory of Open Access Journals (Sweden)

    Sharma Vijay R.

    2015-01-01

    Full Text Available In order to explore the reaction modes on the basis of their entry state spin population, an experiment has been done by employing particle-γ coincidence technique carried out at the Inter University Accelerator Centre, New Delhi. The preliminary analysis conclusively demonstrates, spin distribution for some reaction products populated via complete and/or incomplete fusion of 16O with 159Tb system found to be distinctly different. Further, the existence of incomplete fusion at low bombarding energies indicates the possibility to populate high spin states.

  11. Nanolithographic Fabrication and Heterogeneous Reaction Studies ofTwo-Dimensional Platinum Model Catalyst Systems

    Energy Technology Data Exchange (ETDEWEB)

    Contreras, Anthony Marshall [Univ. of California, Berkeley, CA (United States)

    2006-05-20

    In order to better understand the fundamental components that govern catalytic activity, two-dimensional model platinum nanocatalyst arrays have been designed and fabricated. These catalysts arrays are meant to model the interplay of the metal and support important to industrial heterogeneous catalytic reactions. Photolithography and sub-lithographic techniques such as electron beam lithography, size reduction lithography and nanoimprint lithography have been employed to create these platinum nanoarrays. Both in-situ and ex-situ surface science techniques and catalytic reaction measurements were used to correlate the structural parameters of the system to catalytic activity.

  12. Methylene blue as a lignin surrogate in manganese peroxidase reaction systems.

    Science.gov (United States)

    Goby, Jeffrey D; Penner, Michael H; Lajoie, Curtis A; Kelly, Christine J

    2017-11-15

    Manganese peroxidase (MnP) is associated with lignin degradation and is thus relevant to lignocellulosic-utilization technologies. Technological applications require reaction mixture optimization. A surrogate substrate can facilitate this if its susceptibility to degradation is easily monitored and mirrors that of lignin. The dye methylene blue (MB) was evaluated in these respects as a surrogate substrate by testing its reactivity in reaction mixtures containing relevant redox mediators (dicarboxylic acids, fatty acids). Relative rates of MB degradation were compared to available literature reports of lignin degradation under similar conditions, and suggest that MB can be a useful lignin surrogate in MnP systems. Copyright © 2017 Elsevier Inc. All rights reserved.

  13. Posttreatment and retention outcomes with and without periodontally accelerated osteogenic orthodontics assessed using ABO objective grading system

    Directory of Open Access Journals (Sweden)

    Donald J Ferguson

    2016-01-01

    Full Text Available Background: The posttreatment and retention outcomes following nonextraction orthodontic therapy, with and without corticotomy, were assessed using the American Board of Orthodontists objective grading system (OGS. Purpose: The purpose was to determine if the course of retention was any different following alveolar decortication and augmentation bone grafting, i.e., periodontally accelerated osteogenic orthodontics (PAOO. Materials and Methods: Study casts and panoramic radiographs of patients with and without PAOO (28 subjects each were selected on the basis of the following: (1 comprehensive nonextraction orthodontic treatment using straight wire edgewise appliances for Class I crowding, (2 availability of immediate posttreatment records and retention records at least 1 year post de-bracketing, and (3 use of Hawley removable retainers with similar wearing instructions. Results: Independent and paired t-test statistical testing revealed the following: (1 Posttreatment orthodontic outcomes were the same, with or without corticotomy. (2 During retention, 5 of 8 ABO grading criteria improved for the sample without corticotomy, and 6 of 8 ABO grading criteria improved for the group with corticotomy. (3 Retention outcome scores were lower (better for alignment and marginal ridges in the corticotomy-facilitated group. (4 The total score was significantly lower (better for the corticotomy group at retention and the increment of total score change decreased (improved significantly more during retention following corticotomy. Conclusions: The retention phase was more favorable following corticotomy because the amount of OGS total score change demonstrated a significantly improved retention outcome following PAOO therapy.

  14. A comparison of approximation techniques for variance-based sensitivity analysis of biochemical reaction systems

    Directory of Open Access Journals (Sweden)

    Goutsias John

    2010-05-01

    Full Text Available Abstract Background Sensitivity analysis is an indispensable tool for the analysis of complex systems. In a recent paper, we have introduced a thermodynamically consistent variance-based sensitivity analysis approach for studying the robustness and fragility properties of biochemical reaction systems under uncertainty in the standard chemical potentials of the activated complexes of the reactions and the standard chemical potentials of the molecular species. In that approach, key sensitivity indices were estimated by Monte Carlo sampling, which is computationally very demanding and impractical for large biochemical reaction systems. Computationally efficient algorithms are needed to make variance-based sensitivity analysis applicable to realistic cellular networks, modeled by biochemical reaction systems that consist of a large number of reactions and molecular species. Results We present four techniques, derivative approximation (DA, polynomial approximation (PA, Gauss-Hermite integration (GHI, and orthonormal Hermite approximation (OHA, for analytically approximating the variance-based sensitivity indices associated with a biochemical reaction system. By using a well-known model of the mitogen-activated protein kinase signaling cascade as a case study, we numerically compare the approximation quality of these techniques against traditional Monte Carlo sampling. Our results indicate that, although DA is computationally the most attractive technique, special care should be exercised when using it for sensitivity analysis, since it may only be accurate at low levels of uncertainty. On the other hand, PA, GHI, and OHA are computationally more demanding than DA but can work well at high levels of uncertainty. GHI results in a slightly better accuracy than PA, but it is more difficult to implement. OHA produces the most accurate approximation results and can be implemented in a straightforward manner. It turns out that the computational cost of the

  15. Risk of high-grade cervical dysplasia and cervical cancer in women with systemic lupus erythematosus receiving immunosuppressive drugs.

    Science.gov (United States)

    Feldman, C H; Liu, J; Feldman, S; Solomon, D H; Kim, S C

    2017-06-01

    Objective Prior studies suggest an increased risk of cervical cancer among women with systemic lupus erythematosus. However, the relationship with immunosuppressive drugs is not well studied in US nationwide cohorts. We compared the risk of high-grade cervical dysplasia and cervical cancer among women with systemic lupus erythematosus who started immunosuppressive drugs versus hydroxychloroquine. Methods We identified systemic lupus erythematosus patients initiating immunosuppressive drugs or hydroxychloroquine using claims data from two US commercial health plans and Medicaid (2000-2012). We used a validated claims-based algorithm to identify high-grade cervical dysplasia or cervical cancer. To account for potential confounders, including demographic factors, comorbidities, medication use, HPV vaccination status, and health care utilization, immunosuppressive drugs and hydroxychloroquine initiators were 1:1 matched on the propensity score. We used inverse variance-weighted, fixed effect models to pool hazard ratios from the propensity score-matched Medicaid and commercial cohorts. Results We included 2451 matched pairs of immunosuppressive drugs and hydroxychloroquine new users in the commercial cohort and 7690 matched pairs in Medicaid. In the commercial cohort, there were 14 cases of cervical dysplasia or cervical cancer among immunosuppressive drugs users and five cases among hydroxychloroquine users (hazard ratio 2.47, 95% CI 0.89-6.85, hydroxychloroquine = ref). In Medicaid, there were 46 cases among immunosuppressive drugs users and 29 cases in hydroxychloroquine users (hazard ratio 1.24, 95% CI 0.78-1.98, hydroxychloroquine = ref). The pooled hazard ratio of immunosuppressive drugs was 1.40 (95% CI 0.92-2.12). Conclusion Among women with systemic lupus erythematosus, immunosuppressive drugs may be associated with a greater, albeit not statistically significant, risk of high-grade cervical dysplasia and cervical cancer compared to patients receiving

  16. A Food-Grade Cloning System for Industrial Strains of Lactococcus lactis

    OpenAIRE

    Sørensen, Kim I.; Larsen, Rasmus; Kibenich, Annette; Junge, Mette P.; Johansen, Eric

    2000-01-01

    We have previously reported the construction of a food-grade cloning vector for Lactococcus using the ochre suppressor, supB, as the selective marker. This vector, pFG1, causes only a slight growth inhibition in the laboratory strain MG1363 but is unstable in the industrial strains tested. As supB suppresses both amber and ochre stop codons, which are present in 82% of all known lactococcal genes, this undesirable finding may result from the accumulation of elongated mistranslated polypeptide...

  17. Classroom: Efficient Grading

    Science.gov (United States)

    Shaw, David D.; Pease, Leonard F., III.

    2014-01-01

    Grading can be accelerated to make time for more effective instruction. This article presents specific time management strategies selected to decrease administrative time required of faculty and teaching assistants, including a multiple answer multiple choice interface for exams, a three-tier grading system for open ended problem solving, and a…

  18. Physical attraction to reliable, low variability nervous systems: Reaction time variability predicts attractiveness.

    Science.gov (United States)

    Butler, Emily E; Saville, Christopher W N; Ward, Robert; Ramsey, Richard

    2017-01-01

    The human face cues a range of important fitness information, which guides mate selection towards desirable others. Given humans' high investment in the central nervous system (CNS), cues to CNS function should be especially important in social selection. We tested if facial attractiveness preferences are sensitive to the reliability of human nervous system function. Several decades of research suggest an operational measure for CNS reliability is reaction time variability, which is measured by standard deviation of reaction times across trials. Across two experiments, we show that low reaction time variability is associated with facial attractiveness. Moreover, variability in performance made a unique contribution to attractiveness judgements above and beyond both physical health and sex-typicality judgements, which have previously been associated with perceptions of attractiveness. In a third experiment, we empirically estimated the distribution of attractiveness preferences expected by chance and show that the size and direction of our results in Experiments 1 and 2 are statistically unlikely without reference to reaction time variability. We conclude that an operating characteristic of the human nervous system, reliability of information processing, is signalled to others through facial appearance. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. High energy nuclear reactions ('Spallation') and their application in calculation of the Acceleration Driven Systems (ADS)

    International Nuclear Information System (INIS)

    Rossi, Pedro Carlos Russo

    2011-01-01

    This work presents a study of high energy nuclear reactions which are fundamental to dene the source term in accelerator driven systems. These nuclear reactions, also known as spallation, consist in the interaction of high energetic hadrons with nucleons in the atomic nucleus. The phenomenology of these reactions consist in two step. In the rst, the proton interacts through multiple scattering in a process called intra-nuclear cascade. It is followed by a step in which the excited nucleus, coming from the intranuclear cascade, could either, evaporates particles to achieve a moderate energy state or fission. This process is known as competition between evaporation and fission. In this work the main nuclear models, Bertini and Cugnon are reviewed, since these models are fundamental for design purposes of the source term in ADS, due to lack of evaluated nuclear data for these reactions. The implementation and validation of the calculation methods for the design of the source is carried out to implement the methodology of source design using the program MCNPX (Monte Carlo N-Particle eXtended), devoted to calculation of transport of these particles and the validation performed by an international cooperation together with a Coordinated Research Project (CRP) of the International Atomic Energy Agency and available jobs, in order to qualify the calculations on nuclear reactions and the de-excitation channels involved, providing a state of the art of design and methodology for calculating external sources of spallation for source driven systems. The CRISP, is a brazilian code for the phenomenological description of the reactions involved and the models implemented in the code were reviewed and improved to continue the qualification process. Due to failure of the main models in describing the production of light nuclides, the multifragmentation reaction model was studied. Because the discrepancies in the calculations of production of these nuclides are attributes to the

  20. Development of the system for excitation function automatic measurement of nuclear reactions

    International Nuclear Information System (INIS)

    Sapozhnikov, A.B.

    2004-01-01

    Full text: The resonance nuclear reaction method is applied at the tandem accelerator UKP-2-1 to determinate films thickness and obtain light element depth distribution. The system for automatic measurement of the nuclear reaction excitation curve has been developed. It allowed to obtain an excitation function of nuclear reaction using continuous changing potential of the target with energy step of 6 eV. Saw-tooth voltage with amplitude up to 6 kV from the block of scanning beam is fed to a target. The amplitude is determined by constant voltage from the scanning beam block control. Nal(Tl) detector detects gamma quanta - the products of a nuclear reaction and transforms they in voltage impulses. The impulses through the amplifier income in the single-channel analyzer which forms impulses to start the analog-to-digital converter. The value of saw-tooth voltage corresponding to the moment of gamma quantum detection is read by the analog-to-digital converter, where it is transformed to digital code and transmitted to the computer. The computer program has been developed to control the process of accumulation of excitation function. The dependence a detected γ-quanta yield from a target potential is automatically plotted by the program. This dependence corresponds to the nuclear reaction excitation function. If scanning amplitude is not enough in order to scan need depth of a sample, an operator increases energy of the proton beam changing high voltage potential of the terminal up 3 keV and measures the nuclear reaction excitation function with the new energy. This procedure can be repeated some times. After that 'sewing' of excitation functions is carried out by the program under the hypothesis that nuclear reaction yield in last points be identical

  1. Existence of weak solutions to a nonlinear reaction-diffusion system with singular sources

    Directory of Open Access Journals (Sweden)

    Ida de Bonis

    2017-09-01

    Full Text Available We discuss the existence of a class of weak solutions to a nonlinear parabolic system of reaction-diffusion type endowed with singular production terms by reaction. The singularity is due to a potential occurrence of quenching localized to the domain boundary. The kind of quenching we have in mind is due to a twofold contribution: (i the choice of boundary conditions, modeling in our case the contact with an infinite reservoir filled with ready-to-react chemicals and (ii the use of a particular nonlinear, non-Lipschitz structure of the reaction kinetics. Our working techniques use fine energy estimates for approximating non-singular problems and uniform control on the set where singularities are localizing.

  2. The rate coefficients of unimolecular reactions in the systems with power-law distributions

    Science.gov (United States)

    Yin, Cangtao; Guo, Ran; Du, Jiulin

    2014-08-01

    The rate coefficient formulae of unimolecular reactions are generalized to the systems with the power-law distributions based on nonextensive statistics, and the power-law rate coefficients are derived in the high and low pressure limits, respectively. The numerical analyses are made of the rate coefficients as functions of the ν-parameter, the threshold energy, the temperature and the number of degrees of freedom. We show that the new rate coefficients depend strongly on the ν-parameter different from one (thus from a Boltzmann-Gibbs distribution). Two unimolecular reactions, CH3CO→CH3+CO and CH3NC→CH3CN, are taken as application examples to calculate their power-law rate coefficients, which obtained with the ν-parameters slightly different from one can be exactly in agreement with all the experimental studies on these two reactions in the given temperature ranges.

  3. Nobel Prize 1992: Rudolph A. Marcus: theory of electron transfer reactions in chemical systems

    International Nuclear Information System (INIS)

    Ulate Segura, Diego Guillermo

    2011-01-01

    A review of the theory developed by Rudolph A. Marcus is presented, who for his rating to the theory of electron transfer in chemical systems was awarded the Nobel Prize in Chemistry in 1992. Marcus theory has constituted not only a good extension of the use of a spectroscopic principle, but also has provided an energy balance and the application of energy conservation for electron transfer reactions. A better understanding of the reaction coordinate is exposed in terms energetic and establishing the principles that govern the transfer of electrons, protons and some labile small molecular groups as studied at present. Also, the postulates and equations described have established predictive models of reaction time, very useful for industrial environments, biological, metabolic, and others that involve redox processes. Marcus theory itself has also constituted a large contribution to the theory of complex transition [es

  4. Multiresponse kinetic modelling of Maillard reaction and caramelisation in a heated glucose/wheat flour system.

    Science.gov (United States)

    Kocadağlı, Tolgahan; Gökmen, Vural

    2016-11-15

    The study describes the kinetics of the formation and degradation of α-dicarbonyl compounds in glucose/wheat flour system heated under low moisture conditions. Changes in the concentrations of glucose, fructose, individual free amino acids, lysine and arginine residues, glucosone, 1-deoxyglucosone, 3-deoxyglucosone, 3,4-dideoxyglucosone, 5-hydroxymethyl-2-furfural, glyoxal, methylglyoxal and diacetyl concentrations were determined to form a multiresponse kinetic model for isomerisation and degradation reactions of glucose. Degradation of Amadori product mainly produced 1-deoxyglucosone. Formation of 3-deoxyglucosone proceeded directly from glucose and also Amadori product degradation. Glyoxal formation was predominant from glucosone while methylglyoxal and diacetyl originated from 1-deoxyglucosone. Formation of 5-hydroxymethyl-2-furfural from fructose was found to be a key step. Multi-response kinetic modelling of Maillard reaction and caramelisation simultaneously indicated quantitatively predominant parallel and consecutive pathways and rate limiting steps by estimating the reaction rate constants. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Characterization of ionic liquid‐based biocatalytic two‐phase reaction system for production of biodiesel

    DEFF Research Database (Denmark)

    Prabhavathi Devi, Bethala Lakshmi Anu; Guo, Zheng; Xu, Xuebing

    2011-01-01

    The property of a variety of ionic liquids (ILs) as reaction media was evaluated for the production of biodiesel by enzymatic methanolysis of rapeseed oil. The IL Ammoeng 102, containing tetraaminum cation with C18 acyl and oligoethyleneglycol units, was found to be capable of forming oil....../IL biphasic reaction system by mixing with substrates, which is highly effective for the production of biodiesel with more than 98% biodiesel yield and nearly 100% conversion of oil. Conductor‐like screening model for real solvent (COSMO‐RS) in silico prediction of substrate solubility and simulation...... of partition coefficient change vs. reaction evolution indicated that the amphiphilic property of Ammoeng 102 might be responsible for creating efficient interaction of immiscible substrates; while big difference of partition coefficients of generated biodiesel and glycerol between the two phases suggests...

  6. Corrosion potential detection method, potential characteristic simulation method for reaction rate and plant monitoring system using the same

    International Nuclear Information System (INIS)

    Sakai, Masanori; Onaka, Noriyuki; Takahashi, Tatsuya; Yamanaka, Hiroshi.

    1995-01-01

    In a calculation controlling device for a plant monitoring system, concentrations of materials concerning reaction materials in a certain state of a reaction process, and an actually measured value for the potential of a material in this state are substituted into a reaction rate equation obtained in accordance with a reaction process model. With such procedures, a relation between the reaction rate (current value) and the potential of the material can be obtained. A potential at which the reaction rates of an anode reaction and a cathode reaction contained in a corrosion reaction are made equal is determined by a numerical value calculation, based on an electrochemical hybrid potential logic by using the reaction rate equation, the reaction rate information relative to the corrosion reaction of the material and the concentration of the material concerning the corrosion reaction is obtained by a numerical value calculation. Then, simulation for the corrosion potential is enabled based on the handling corresponding to the actual reaction. Further, even for a portion which can not be measured actually, the corrosion potential can be recognized by simulation. (N.H.)

  7. Toward High School Biology: Helping Middle School Students Understand Chemical Reactions and Conservation of Mass in Nonliving and Living Systems

    Science.gov (United States)

    Herrmann-Abell, Cari F.; Koppal, Mary; Roseman, Jo Ellen

    2016-01-01

    Modern biology has become increasingly molecular in nature, requiring students to understand basic chemical concepts. Studies show, however, that many students fail to grasp ideas about atom rearrangement and conservation during chemical reactions or the application of these ideas to biological systems. To help provide students with a better foundation, we used research-based design principles and collaborated in the development of a curricular intervention that applies chemistry ideas to living and nonliving contexts. Six eighth grade teachers and their students participated in a test of the unit during the Spring of 2013. Two of the teachers had used an earlier version of the unit the previous spring. The other four teachers were randomly assigned either to implement the unit or to continue teaching the same content using existing materials. Pre- and posttests were administered, and the data were analyzed using Rasch modeling and hierarchical linear modeling. The results showed that, when controlling for pretest score, gender, language, and ethnicity, students who used the curricular intervention performed better on the posttest than the students using existing materials. Additionally, students who participated in the intervention held fewer misconceptions. These results demonstrate the unit’s promise in improving students’ understanding of the targeted ideas. PMID:27909024

  8. Modeling of the interplay between single-file diffusion and conversion reaction in mesoporous systems

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jing [Iowa State Univ., Ames, IA (United States)

    2013-01-11

    We analyze the spatiotemporal behavior of species concentrations in a diffusion-mediated conversion reaction which occurs at catalytic sites within linear pores of nanometer diameter. A strict single-file (no passing) constraint occurs in the diffusion within such narrow pores. Both transient and steady-state behavior is precisely characterized by kinetic Monte Carlo simulations of a spatially discrete lattice–gas model for this reaction–diffusion process considering various distributions of catalytic sites. Exact hierarchical master equations can also be developed for this model. Their analysis, after application of mean-field type truncation approximations, produces discrete reaction–diffusion type equations (mf-RDE). For slowly varying concentrations, we further develop coarse-grained continuum hydrodynamic reaction–diffusion equations (h-RDE) incorporating a precise treatment of single-file diffusion (SFD) in this multispecies system. Noting the shortcomings of mf-RDE and h-RDE, we then develop a generalized hydrodynamic (GH) formulation of appropriate gh-RDE which incorporates an unconventional description of chemical diffusion in mixed-component quasi-single-file systems based on a refined picture of tracer diffusion for finite-length pores. The gh-RDE elucidate the non-exponential decay of the steady-state reactant concentration into the pore and the non-mean-field scaling of the reactant penetration depth. Then an extended model of a catalytic conversion reaction within a functionalized nanoporous material is developed to assess the effect of varying the reaction product – pore interior interaction from attractive to repulsive. The analysis is performed utilizing the generalized hydrodynamic formulation of the reaction-diffusion equations which can reliably capture the complex interplay between reaction and restricted transport for both irreversible and reversible reactions.

  9. Stability analysis of non-autonomous reaction-diffusion systems: the effects of growing domains

    KAUST Repository

    Madzvamuse, Anotida; Gaffney, Eamonn A.; Maini, Philip K.

    2009-01-01

    By using asymptotic theory, we generalise the Turing diffusively-driven instability conditions for reaction-diffusion systems with slow, isotropic domain growth. There are two fundamental biological differences between the Turing conditions on fixed and growing domains, namely: (i) we need not enforce cross nor pure kinetic conditions and (ii) the restriction to activator-inhibitor kinetics to induce pattern formation on a growing biological system is no longer a requirement. Our theoretical findings are confirmed and reinforced by numerical simulations for the special cases of isotropic linear, exponential and logistic growth profiles. In particular we illustrate an example of a reaction-diffusion system which cannot exhibit a diffusively-driven instability on a fixed domain but is unstable in the presence of slow growth. © Springer-Verlag 2009.

  10. Stability analysis of non-autonomous reaction-diffusion systems: the effects of growing domains

    KAUST Repository

    Madzvamuse, Anotida

    2009-08-29

    By using asymptotic theory, we generalise the Turing diffusively-driven instability conditions for reaction-diffusion systems with slow, isotropic domain growth. There are two fundamental biological differences between the Turing conditions on fixed and growing domains, namely: (i) we need not enforce cross nor pure kinetic conditions and (ii) the restriction to activator-inhibitor kinetics to induce pattern formation on a growing biological system is no longer a requirement. Our theoretical findings are confirmed and reinforced by numerical simulations for the special cases of isotropic linear, exponential and logistic growth profiles. In particular we illustrate an example of a reaction-diffusion system which cannot exhibit a diffusively-driven instability on a fixed domain but is unstable in the presence of slow growth. © Springer-Verlag 2009.

  11. Modeling of a Reaction-Distillation-Recycle System to Produce Dimethyl Ether through Methanol Dehydration

    Science.gov (United States)

    Muharam, Y.; Zulkarnain, L. M.; Wirya, A. S.

    2018-03-01

    The increase in the dimethyl ether yield through methanol dehydration due to a recycle integration to a reaction-distillation system was studied in this research. A one-dimensional phenomenological model of a methanol dehydration reactor and a shortcut model of distillation columns were used to achieve the aim. Simulation results show that 10.7 moles/s of dimethyl ether is produced in a reaction-distillation system with the reactor length being 4 m, the reactor inlet pressure being 18 atm, the reactor inlet temperature being 533 K, the reactor inlet velocity being 0.408 m/s, and the distillation pressure being 8 atm. The methanol conversion is 90% and the dimethyl ether yield is 48%. The integration of the recycle stream to the system increases the dimethyl ether yield by 8%.

  12. Performance and cost of energy transport and storage systems for dish applications using reversible chemical reactions

    Science.gov (United States)

    Schredder, J. M.; Fujita, T.

    1984-01-01

    The use of reversible chemical reactions for energy transport and storage for parabolic dish networks is considered. Performance and cost characteristics are estimated for systems using three reactions (sulfur-trioxide decomposition, steam reforming of methane, and carbon-dioxide reforming of methane). Systems are considered with and without storage, and in several energy-delivery configurations that give different profiles of energy delivered versus temperature. Cost estimates are derived assuming the use of metal components and of advanced ceramics. (The latter reduces the costs by three- to five-fold). The process that led to the selection of the three reactions is described, and the effects of varying temperatures, pressures, and heat exchanger sizes are addressed. A state-of-the-art survey was performed as part of this study. As a result of this survey, it appears that formidable technical risks exist for any attempt to implement the systems analyzed in this study, especially in the area of reactor design and performance. The behavior of all components and complete systems under thermal energy transients is very poorly understood. This study indicates that thermochemical storage systems that store reactants as liquids have efficiencies below 60%, which is in agreement with the findings of earlier investigators.

  13. The analysis of magnesium oxide hydration in three-phase reaction system

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Xiaojia; Guo, Lin; Chen, Chen; Liu, Quan; Li, Tie; Zhu, Yimin, E-mail: ntp@dlmu.edu.cn

    2014-05-01

    In order to investigate the magnesium oxide hydration process in gas–liquid–solid (three-phase) reaction system, magnesium hydroxide was prepared by magnesium oxide hydration in liquid–solid (two-phase) and three-phase reaction systems. A semi-empirical model and the classical shrinking core model were used to fit the experimental data. The fitting result shows that both models describe well the hydration process of three-phase system, while only the semi-empirical model right for the hydration process of two-phase system. The characterization of the hydration product using X-Ray diffraction (XRD) and scanning electron microscope (SEM) was performed. The XRD and SEM show hydration process in the two-phase system follows common dissolution/precipitation mechanism. While in the three-phase system, the hydration process undergo MgO dissolution, Mg(OH){sub 2} precipitation, Mg(OH){sub 2} peeling off from MgO particle and leaving behind fresh MgO surface. - Graphical abstract: There was existence of a peeling-off process in the gas–liquid–solid (three-phase) MgO hydration system. - Highlights: • Magnesium oxide hydration in gas–liquid–solid system was investigated. • The experimental data in three-phase system could be fitted well by two models. • The morphology analysis suggested that there was existence of a peel-off process.

  14. Continuous optical measurement system of hemolysis during a photosensitization reaction using absorption spectrum

    Science.gov (United States)

    Hamada, R.; Ogawa, E.; Arai, T.

    2018-02-01

    To investigate hemolysis phenomena during a photosensitization reaction with the reaction condition continuously and simultaneously for a safety assessment of hemolysis side effect, we constructed an optical system to measure blood sample absorption spectrum during the reaction. Hemolysis degree might be under estimated in general evaluation methods because there is a constant oxygen pressure assumption in spite of oxygen depression take place. By investigating hemoglobin oxidation and oxygen desorption dynamics obtained from the contribution of the visible absorption spectrum and multiple regression analysis, both the hemolysis phenomena and its oxygen environment might be obtained with time. A 664 nm wavelength laser beam for the reaction excitation and 475-650 nm light beam for measuring the absorbance spectrum were arranged perpendicularly crossing. A quartz glass cuvette with 1×10 mm in dimensions for the spectrum measurement was located at this crossing point. A red blood cells suspension medium was arranged with low hematocrit containing 30 μg/ml talaporfin sodium. This medium was irradiated up to 40 J/cm2 . The met-hemoglobin, oxygenatedhemoglobin, and deoxygenated-hemoglobin concentrations were calculated by a multiple regression analysis from the measured spectra. We confirmed the met-hemoglobin concentration increased and oxygen saturation decreased with the irradiation time, which seems to indicate the hemolysis progression and oxygen consumption, respectively. By using our measuring system, the hemolysis progression seems to be obtained with oxygen environment information.

  15. Atmospheric reaction systems as null-models to identify structural traces of evolution in metabolism.

    Directory of Open Access Journals (Sweden)

    Petter Holme

    Full Text Available The metabolism is the motor behind the biological complexity of an organism. One problem of characterizing its large-scale structure is that it is hard to know what to compare it to. All chemical reaction systems are shaped by the same physics that gives molecules their stability and affinity to react. These fundamental factors cannot be captured by standard null-models based on randomization. The unique property of organismal metabolism is that it is controlled, to some extent, by an enzymatic machinery that is subject to evolution. In this paper, we explore the possibility that reaction systems of planetary atmospheres can serve as a null-model against which we can define metabolic structure and trace the influence of evolution. We find that the two types of data can be distinguished by their respective degree distributions. This is especially clear when looking at the degree distribution of the reaction network (of reaction connected to each other if they involve the same molecular species. For the Earth's atmospheric network and the human metabolic network, we look into more detail for an underlying explanation of this deviation. However, we cannot pinpoint a single cause of the difference, rather there are several concurrent factors. By examining quantities relating to the modular-functional organization of the metabolism, we confirm that metabolic networks have a more complex modular organization than the atmospheric networks, but not much more. We interpret the more variegated modular arrangement of metabolism as a trace of evolved functionality. On the other hand, it is quite remarkable how similar the structures of these two types of networks are, which emphasizes that the constraints from the chemical properties of the molecules has a larger influence in shaping the reaction system than does natural selection.

  16. Kinetics and mechanism of oxygen reduction reaction at CoPd system synthesized on XC72

    International Nuclear Information System (INIS)

    Tarasevich, M.R.; Chalykh, A.E.; Bogdanovskaya, V.A.; Kuznetsova, L.N.; Kapustina, N.A.; Efremov, B.N.; Ehrenburg, M.R.; Reznikova, L.A.

    2006-01-01

    Studies are presented of the kinetics and mechanism of oxygen electroreduction reaction on CoPd catalysts synthesized on carbon black XC72. As shown both in model conditions and in the tests within the cathodes of hydrogen-oxygen fuel cells with proton conducting electrolyte, CoPd/C system features a higher activity, as compared to Co/C. The highest activity in the oxygen reduction reaction is demonstrated by the catalysts with the Pd:Co atomic ratio being 7:3 and 4:1. The structural studies (XPS and XRD, and also the data of CO desorption measurements) evidence the CoPd alloy formation, which is reflected in the negative shift of the bonding energy maximum as compared to Pd/C and in the appearance of the additional CO desorption maximums on the voltammograms. It is found by means of structural research that CoPd alloy is formed in the course of the catalyst synthesis which features a higher catalytic activity of the binary systems. Besides, CoPd/C catalyst is more stable in respect to corrosion than Pd supported on carbon black. The measurements on the rotating disc electrode and rotating ring-disc electrode evidence that CoPd/C system provides the predominant oxygen reduction to water in the practically important range of potentials (E > 0.7 V). The proximity of kinetic parameters of the oxygen reduction reaction on CoPd/C and Pt/C catalysts points to the similar reaction mechanism. The slow step of the reaction is the addition of the first electron to the adsorbed and previously protonated O 2 molecule. The assumptions are offered about the reasons causing the higher activity and selectivity of the binary catalyst towards oxygen reduction to water, as compared to Co/C. The studies of the most active catalysts within the fuel cell cathodes are performed

  17. Mn(II) oxidation in Fenton and Fenton type systems : Identification of Reaction Efficiency and Reaction Products

    NARCIS (Netherlands)

    van Genuchten, C.M.; Peña, Jasquelin

    2017-01-01

    Efficient and low-cost methods of removing aqueous Mn(II) are required to improve the quality of impacted groundwater supplies. In this work, we show that Fe(0) electrocoagulation (EC) permits the oxidative removal of Mn(II) from solution by reaction with the reactive oxidant species produced

  18. Reaction of long-lived radicals and vitamin C in γ-irradiated mammalian cells and their model system at 295 K. Tunneling reaction in biological system

    International Nuclear Information System (INIS)

    Matsumoto, Takuro; Kumada, Takayuki; Kodama, Seiji; Watanabe, Masami

    1997-01-01

    When golden hamster embryo (GHE) cells or concentrated albumin solution (0.1 kg dm -3 ), that is a model system of cells, is irradiated with γ-rays at 295 K, organic radicals produced can be observed by ESR. The organic radicals survive at both 295 and 310 K for as long as 20 h. The long-lived radicals in GHE cells and the albumin solution react with vitamin C by the rate constants of 0.007 dm 3 mol -1 s -1 and 0.014 dm 3 mol -1 s -1 , respectively. The long-lived radicals in human cells cause gene mutation, which is suppressed by the addition of vitamin C. The isotope effect on the rate constant (κ) for the reaction of the long-lived radicals and vitamin C has been studied in the albumin solution by use of protonated vitamin C and deuterated vitamin C. The isotope effect (κ H /κ D ) was more than 20 ∼ 50 and was interpreted in terms of tunnelling reaction. (author)

  19. Setting standards to determine core clerkship grades in pediatrics.

    Science.gov (United States)

    Dudas, Robert A; Barone, Michael A

    2014-01-01

    One of the greatest challenges for clerkship directors is assigning a final grade and determining the precise point at which a student either passes or fails a clinical clerkship. The process of incorporating both subjective and objective assessment data to provide a final summative grade can be challenging. We describe our experience conducting a standard-setting exercise to set defensible cut points in a 4-tiered grading system in our pediatric clerkship. Using the Hofstee standard-setting approach, 8 faculty members participated in an exercise to establish grade cut points. These faculty members were subsequently surveyed to assess their attitudes toward the standard-setting process as well as their reactions to these newly proposed standards. We applied the new cut points to a historic cohort of 116 Johns Hopkins University School of Medicine students from the academic year 2012-2013 to assess the potential impact on grade distributions. The resultant grading schema would lead to a significant increase in the number of students receiving a failing grade and a decrease in the number of students receiving a grade of honors in a historical cohort. Faculty reported that the Hofstee method was easy to understand and fair. All faculty members thought that grade inflation presently exists within the pediatric clerkship. This study demonstrates that practical standards using the Hofstee method can be set for medical students in a pediatric clerkship in which multiple performance measures are used. Copyright © 2014 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

  20. Graded Fock-like representations for a system of algebraically interacting paraparticles

    International Nuclear Information System (INIS)

    Kanakoglou, Konstantinos; Herrera-Aguilar, Alfredo

    2011-01-01

    We will present and study an algebra describing a mixed paraparticle model, known in the bibliography as 'The Relative Parabose Set (RPBS)'. Focusing in the special case of a single parabosonic and a single parafermionic degree of freedom P (1,1) BF , we will construct a class of Fock-like representations of this algebra, dependent on a positive parameter p a kind of generalized parastatistics order. Mathematical properties of the Fock-like modules will be investigated for all values of p and constructions such as ladder operators, irreducibility (for the carrier spaces) and (Z 2 x Z 2 )-gradings (for both the carrier spaces and the algebra itself) will be established.

  1. An optics-based variable-temperature assay system for characterizing thermodynamics of biomolecular reactions on solid support

    Energy Technology Data Exchange (ETDEWEB)

    Fei, Yiyan; Landry, James P.; Zhu, X. D., E-mail: xdzhu@physics.ucdavis.edu [Department of Physics, University of California, One Shields Avenue, Davis, California 95616 (United States); Li, Yanhong; Yu, Hai; Lau, Kam; Huang, Shengshu; Chokhawala, Harshal A.; Chen, Xi [Department of Chemistry, University of California, One Shields Avenue, Davis, California 95616 (United States)

    2013-11-15

    A biological state is equilibrium of multiple concurrent biomolecular reactions. The relative importance of these reactions depends on physiological temperature typically between 10 °C and 50 °C. Experimentally the temperature dependence of binding reaction constants reveals thermodynamics and thus details of these biomolecular processes. We developed a variable-temperature opto-fluidic system for real-time measurement of multiple (400–10 000) biomolecular binding reactions on solid supports from 10 °C to 60 °C within ±0.1 °C. We illustrate the performance of this system with investigation of binding reactions of plant lectins (carbohydrate-binding proteins) with 24 synthetic glycans (i.e., carbohydrates). We found that the lectin-glycan reactions in general can be enthalpy-driven, entropy-driven, or both, and water molecules play critical roles in the thermodynamics of these reactions.

  2. Mathematical Modeling and Dynamic Simulation of Metabolic Reaction Systems Using Metabolome Time Series Data

    Directory of Open Access Journals (Sweden)

    Kansuporn eSriyudthsak

    2016-05-01

    Full Text Available The high-throughput acquisition of metabolome data is greatly anticipated for the complete understanding of cellular metabolism in living organisms. A variety of analytical technologies have been developed to acquire large-scale metabolic profiles under different biological or environmental conditions. Time series data are useful for predicting the most likely metabolic pathways because they provide important information regarding the accumulation of metabolites, which implies causal relationships in the metabolic reaction network. Considerable effort has been undertaken to utilize these data for constructing a mathematical model merging system properties and quantitatively characterizing a whole metabolic system in toto. However, there are technical difficulties between benchmarking the provision and utilization of data. Although hundreds of metabolites can be measured, which provide information on the metabolic reaction system, simultaneous measurement of thousands of metabolites is still challenging. In addition, it is nontrivial to logically predict the dynamic behaviors of unmeasurable metabolite concentrations without sufficient information on the metabolic reaction network. Yet, consolidating the advantages of advancements in both metabolomics and mathematical modeling remain to be accomplished. This review outlines the conceptual basis of and recent advances in technologies in both the research fields. It also highlights the potential for constructing a large-scale mathematical model by estimating model parameters from time series metabolome data in order to comprehensively understand metabolism at the systems level.

  3. Mathematical Modeling and Dynamic Simulation of Metabolic Reaction Systems Using Metabolome Time Series Data.

    Science.gov (United States)

    Sriyudthsak, Kansuporn; Shiraishi, Fumihide; Hirai, Masami Yokota

    2016-01-01

    The high-throughput acquisition of metabolome data is greatly anticipated for the complete understanding of cellular metabolism in living organisms. A variety of analytical technologies have been developed to acquire large-scale metabolic profiles under different biological or environmental conditions. Time series data are useful for predicting the most likely metabolic pathways because they provide important information regarding the accumulation of metabolites, which implies causal relationships in the metabolic reaction network. Considerable effort has been undertaken to utilize these data for constructing a mathematical model merging system properties and quantitatively characterizing a whole metabolic system in toto. However, there are technical difficulties between benchmarking the provision and utilization of data. Although, hundreds of metabolites can be measured, which provide information on the metabolic reaction system, simultaneous measurement of thousands of metabolites is still challenging. In addition, it is nontrivial to logically predict the dynamic behaviors of unmeasurable metabolite concentrations without sufficient information on the metabolic reaction network. Yet, consolidating the advantages of advancements in both metabolomics and mathematical modeling remain to be accomplished. This review outlines the conceptual basis of and recent advances in technologies in both the research fields. It also highlights the potential for constructing a large-scale mathematical model by estimating model parameters from time series metabolome data in order to comprehensively understand metabolism at the systems level.

  4. Testing different brain metastasis grading systems in stereotactic radiosurgery: Radiation Therapy Oncology Group's RPA, SIR, BSBM, GPA, and modified RPA.

    Science.gov (United States)

    Serizawa, Toru; Higuchi, Yoshinori; Nagano, Osamu; Hirai, Tatsuo; Ono, Junichi; Saeki, Naokatsu; Miyakawa, Akifumi

    2012-12-01

    The authors conducted validity testing of the 5 major reported indices for radiosurgically treated brain metastases- the original Radiation Therapy Oncology Group's Recursive Partitioning Analysis (RPA), the Score Index for Radiosurgery in Brain Metastases (SIR), the Basic Score for Brain Metastases (BSBM), the Graded Prognostic Assessment (GPA), and the subclassification of RPA Class II proposed by Yamamoto-in nearly 2500 cases treated with Gamma Knife surgery (GKS), focusing on the preservation of neurological function as well as the traditional endpoint of overall survival. The authors analyzed data from 2445 cases treated with GKS by the first author (T.S.), the primary surgeon. The patient group consisted of 1716 patients treated between January 1998 and March 2008 (the Chiba series) and 729 patients treated between April 2008 and December 2011 (the Tokyo series). The interval from the date of GKS until the date of the patient's death (overall survival) and impaired activities of daily living (qualitative survival) were calculated using the Kaplan-Meier method, while the absolute risk for two adjacent classes of each grading system and both hazard ratios and 95% confidence intervals were estimated using the Cox proportional hazards model. For overall survival, there were highly statistically significant differences between each two adjacent patient groups characterized by class or score (all p values RPA appeared to be better than the original RPA and GPA. The modified RPA subclassification, proposed by Yamamoto, is well balanced in scoring simplicity with respect to case number distribution and statistical results for overall survival. However, a new or revised grading system is necessary for predicting qualitative survival and for selecting the optimal treatment for patients with brain metastasis treated by GKS.

  5. Asymptotic stability of a coupled advection-diffusion-reaction system arising in bioreactor processes

    Directory of Open Access Journals (Sweden)

    Maria Crespo

    2017-08-01

    Full Text Available In this work, we present an asymptotic analysis of a coupled system of two advection-diffusion-reaction equations with Danckwerts boundary conditions, which models the interaction between a microbial population (e.g., bacteria, called biomass, and a diluted organic contaminant (e.g., nitrates, called substrate, in a continuous flow bioreactor. This system exhibits, under suitable conditions, two stable equilibrium states: one steady state in which the biomass becomes extinct and no reaction is produced, called washout, and another steady state, which corresponds to the partial elimination of the substrate. We use the linearization method to give sufficient conditions for the linear asymptotic stability of the two stable equilibrium configurations. Finally, we compare our asymptotic analysis with the usual asymptotic analysis associated to the continuous bioreactor when it is modeled with ordinary differential equations.

  6. Variationally optimal selection of slow coordinates and reaction coordinates in macromolecular systems

    Science.gov (United States)

    Noe, Frank

    To efficiently simulate and generate understanding from simulations of complex macromolecular systems, the concept of slow collective coordinates or reaction coordinates is of fundamental importance. Here we will introduce variational approaches to approximate the slow coordinates and the reaction coordinates between selected end-states given MD simulations of the macromolecular system and a (possibly large) basis set of candidate coordinates. We will then discuss how to select physically intuitive order paremeters that are good surrogates of this variationally optimal result. These result can be used in order to construct Markov state models or other models of the stationary and kinetics properties, in order to parametrize low-dimensional / coarse-grained model of the dynamics. Deutsche Forschungsgemeinschaft, European Research Council.

  7. Emergent structures in reaction-advection-diffusion systems on a sphere

    Science.gov (United States)

    Krause, Andrew L.; Burton, Abigail M.; Fadai, Nabil T.; Van Gorder, Robert A.

    2018-04-01

    We demonstrate unusual effects due to the addition of advection into a two-species reaction-diffusion system on the sphere. We find that advection introduces emergent behavior due to an interplay of the traditional Turing patterning mechanisms with the compact geometry of the sphere. Unidirectional advection within the Turing space of the reaction-diffusion system causes patterns to be generated at one point of the sphere, and transported to the antipodal point where they are destroyed. We illustrate these effects numerically and deduce conditions for Turing instabilities on local projections to understand the mechanisms behind these behaviors. We compare this behavior to planar advection which is shown to only transport patterns across the domain. Analogous transport results seem to hold for the sphere under azimuthal transport or away from the antipodal points in unidirectional flow regimes.

  8. Polymeric reaction of polymer-monomer system for pressure sensitive adhesives by low energy electron beam

    International Nuclear Information System (INIS)

    Takiguchi, R.; Uryu, T.

    1985-01-01

    Application of low-energy electron beam to non-solvent type pressure sensitive adhesives is investigated. The adhesive properties such as peel strength and holding time (dead-load strength) were closely related to the reaction of acrylate polymer-monomer systems. The reaction behavior is elucidated by combining the measurement of gel fraction, infrared spectrum of gel, and the molecular weight distribution detected by gel permeation chromatography. It was important for the production of pressure sensitive adhesives by electron beam that the adhesive with high peel strength and long holding time is composed of a proper combination of three factors, that is, about 35% gel fraction, 25% monomer units in gel, and 15% graft efficiency by irradiating the polymer-monomer system containing low molecular weight poly (butyl acrylate). (author)

  9. Development of wide area reaction system for Reel-to-Reel TFA-MOD process

    International Nuclear Information System (INIS)

    Nomoto, Sukeharu; Aoki, Yuji; Teranishi, Ryo; Sato, Akihiro; Izumi, Teruo; Shiohara, Yuh

    2006-01-01

    The previously developed numerical simulation method for the TFA-MOD process, which calculated the YBCO growth kinetics, gas element diffusion and gas flow, was applied to study the suitable gas flow mode for a multi-turning Reel-to-Reel tape conveyance system of a long YBCO coated conductors. The high YBCO production rate with uniform J c distribution among tape lines is desired in the system. It was found by the numerical simulation for the vertical gas flow onto the tape surface to realize the above demands even in a wider reaction area. We developed a new wide area reaction tube for the Reel-to-Reel TFA-MOD process according to the numerically designed gas flow configuration. The demand for the new tube was confirmed to be satisfied by experiments

  10. Dichotomous-noise-induced pattern formation in a reaction-diffusion system

    Science.gov (United States)

    Das, Debojyoti; Ray, Deb Shankar

    2013-06-01

    We consider a generic reaction-diffusion system in which one of the parameters is subjected to dichotomous noise by controlling the flow of one of the reacting species in a continuous-flow-stirred-tank reactor (CSTR) -membrane reactor. The linear stability analysis in an extended phase space is carried out by invoking Furutzu-Novikov procedure for exponentially correlated multiplicative noise to derive the instability condition in the plane of the noise parameters (correlation time and strength of the noise). We demonstrate that depending on the correlation time an optimal strength of noise governs the self-organization. Our theoretical analysis is corroborated by numerical simulations on pattern formation in a chlorine-dioxide-iodine-malonic acid reaction-diffusion system.

  11. Effect of Ti and C particle sizes on reaction behavior of thermal explosion reaction of Cu−Ti−C system under Ar and air atmospheres

    Energy Technology Data Exchange (ETDEWEB)

    Liang, Yunhong; Zhao, Qian; Li, Xiujuan; Zhang, Zhihui, E-mail: zhzh@jlu.edu.cn; Ren, Luquan

    2016-09-15

    The thermal explosion (TE) reaction behavior of Cu−Ti−C systems with different Ti and C particle sizes was investigated under air and Ar atmospheres. It was found that increasing the Ti and C particle sizes leads to higher ignition temperatures under both atmospheres and that the maximum combustion temperature decreases with increasing C particle size. The TE reaction is much easier to activate (i.e., it has a lower ignition temperature) in air because of the heat released from Ti oxidation and nitridation and Cu oxidation reactions on the Cu−Ti−C compact surface. TiC ceramic particles are successfully prepared in the bulk Cu−Ti−C compacts under both air and Ar atmospheres through a dissolution-diffusion-precipitation mechanism. Differential thermal and thermodynamic analyses show that the TE reaction ignition process in air is mainly controlled by the Ti particle size. - Highlights: • Variation of Ti and C particle sizes affects thermal reaction (TE) behaviors. • Ignition temperature under air is much lower than that under Ar atmosphere. • Heat of oxidation and nitridation reactions reduces ignition temperature under air.

  12. Drug Reaction with Eosinophilia and Systemic Symptom in a Patient with Pneumonia and Hyperthyroidism.

    Science.gov (United States)

    Jin, Hualiang; Wang, Limin; Ye, Jian

    2017-01-01

    Drug rash with eosinophilia and systemic symptoms syndrome is an idiosyncratic drug reaction characterized by fever, skin eruption, lymph node enlargement, and internal organ involvement. We report a case of a patient with pneumonia who developed clinical manifestations of fever, rash, lymphadenopathy, hypereosinophilia, and visceral involvement (renal failure and eosinophilic pneumonitis) caused by methimazole. The patient improved remarkably with drug withdrawal. A high index of clinical suspicion is emphasized to facilitate prompt diagnosis of medication-related adverse effect and its discontinuation.

  13. Carbonylative Heck Reactions Using CO Generated ex Situ in a Two-Chamber System

    DEFF Research Database (Denmark)

    Hermange, Philippe; Gøgsig, Thomas; Lindhardt, Anders Thyboe

    2011-01-01

    A carbonylative Heck reaction of aryl iodides and styrene derivatives employing a two-chamber system using a stable, crystalline, and nontransition metal based carbon monoxide source is reported. By applying near-stoichiometric amounts of the carbon monoxide precursor, an effective exploitation o...... of the hazardous CO gas is obtained affording chalcone derivatives in good yields. Application to isotope labeling, incorporating 13CO, was further established....

  14. CHEMSIMUL - A program package for numerical simulation of chemical reaction systems

    International Nuclear Information System (INIS)

    Lang Rasmussen, O.; Bjergbakke, E.

    1984-01-01

    A description is given of a program package, CHEMSIMUL, for numerical simulation of chemical reaction systems. The main components in the package are a translator of chemical equations to differential equations, a balance equation program, a differential equation solver, EPISODE, and an input/output program. The performance of the program is demonstrated by four examples. A manual for the input file and the complete program text with comments are given in Appendices I and II. (author)

  15. Redox reactions in micellar systems. communication 4. Eosin-photosensitized reduction of methylviologen

    Energy Technology Data Exchange (ETDEWEB)

    Nadtochenko, V.; Dzhabiev, T.S.; Rubtsov, I.V.

    1985-12-10

    The authors present data on photosensitized reduction of methylviologen (MV/sup 2 +/) by disodium ethylenediaminetetraacetate (EDTA) in micellar systems modeling, in a first approximation, the structural organization of components of the chain of energy and electron transfer in natural photosynthesis. Photosensitized reduction of methylviologen by EDTA in micellar solutions can model photosystem I of plants with structure formation of reagents and transfer of excitation energy before the step of occurrence of a redox reaction in the active center.

  16. Lattice-enabled nuclear reactions in the nickel and hydrogen gas system

    International Nuclear Information System (INIS)

    Nagel, David J.

    2015-01-01

    Thousands of lattice-enabled nuclear reaction (LENR) experiments involving electrochemical loading of deuterium into palladium have been conducted and reported in hundreds of papers. But, it appears that the first commercial LENR power generators will employ gas loading of hydrogen onto nickel. This article reviews the scientific base for LENR in the gas-loaded Ni-H system, and some of the tests of pre-commercial prototype generators based on this combination. (author)

  17. Acute renal haemodynamic and renin-angiotensin system responses to graded renal artery stenosis in the dog.

    Science.gov (United States)

    Anderson, W P; Johnston, C I; Korner, P I

    1979-01-01

    1. The acute renal haemodynamic and renin-angiotensin system responses to graded renal artery stenosis were studied in chronically instrumented, unanaesthetized dogs. 2. Stenosis was induced over 30 sec by inflation of a cuff around the renal artery to lower distal pressure to 60, 40 or 20 mmHg, with stenosis maintained for 1 hr. This resulted in an immediate fall in renal vascular resistance, but over the next 5--30 min both resistance and renal artery pressure were restored back towards prestenosis values. Only transient increases in systemic arterial blood pressure and plasma renin and angiotensin levels were seen with the two milder stenoses. Despite restoration of renal artery pressure, renal blood flow remained reduced at all grades of stenosis. 3. Pre-treatment with angiotensin I converting enzyme inhibitor or sarosine1, isoleucone8 angiotensin II greatly attenuated or abolished the restoration of renal artery pressure and renal vascular resistance after stenosis, and plasma renin and angiotensin II levels remained high. Renal dilatation was indefinitely maintained, but the normal restoration of resistance and pressure could be simulated by infusing angiotensin II into the renal artery. 4. The effective resistance to blood flow by the stenosis did not remain constant but varied with changes in the renal vascular resistance. PMID:219182

  18. Post orthodontic treatment stability measurement in dentoskeletal class I malocclusion based on the objective grading system index

    Directory of Open Access Journals (Sweden)

    Bernard Anthony Pasaribu

    2011-03-01

    Full Text Available The purpose of this study was to examine the stability of orthodontic treatment results in dentoskeletal class I malocclusion treated with and without extraction of four premolars and to compare the stability of treatment result between those groups. Occlusal relationship after treatment and six-month post retention were measured on dental cast using The Objective Grading System Index at Orthodontic Specialist Clinic, Faculty of Dentistry Universitas Padjadjaran. The analytic descriptive study was carried out on 30 samples that comprised 14 samples were treated without extraction of four premolars and 16 samples were treated with extraction of four premolars. ABO Measuring Gauge was used to measure seven variables: tooth alignment, the height of the marginal ridges, buccolingual inclination, occlusal relationships, occlusal contacts, overjet, and interproximal tooth contacts. The results were statistically analyzed with the Wilcoxon rank test to test the difference of The Objective Grading System Index between posttreatment and postretension. Mann-Whitney U test was applied to determine the difference between the group with the extraction of four premolars and the group without extraction of four premolars. The level of significance was set at 0.05. The results of this study showed these following variables: tooth alignment, occlusal contacts, and overjet were unstable at the group with the extraction of four premolars, while only tooth alignment was found to be unstable in the group without extraction of the four premolars. Mann-Whitney U test did not show statistically significant difference in stability comparison test between the groups.

  19. [Production of sugar syrup containing rare sugar using dual-enzyme coupled reaction system].

    Science.gov (United States)

    Han, Wenjia; Zhu, Yueming; Bai, Wei; Izumori, Ken; Zhang, Tongcun; Sun, Yuanxia

    2014-01-01

    Enzymatic conversion is very important to produce functional rare sugars, but the conversion rate of single enzymes is generally low. To increase the conversion rate, a dual-enzyme coupled reaction system was developed. Dual-enzyme coupled reaction system was constructed using D-psicose-3-epimerase (DPE) and L-rhamnose isomerase (L-RhI), and used to convert D-fructose to D-psicose and D-allose. The ratio of DPE and L-RhI was 1:10 (W/W), and the concentration of DPE was 0.05 mg/mL. The optimum temperature was 60 degrees C and pH was 9.0. When the concentration of D-fructose was 2%, the reaction reached its equilibrium after 10 h, and the yield of D-psicose and D-allose was 5.12 and 2.04 g/L, respectively. Using the dual-enzymes coupled system developed in the current study, we could obtain sugar syrup containing functional rare sugar from fructose-rich raw material, such as high fructose corn syrup.

  20. Computing molecular fluctuations in biochemical reaction systems based on a mechanistic, statistical theory of irreversible processes.

    Science.gov (United States)

    Kulasiri, Don

    2011-01-01

    We discuss the quantification of molecular fluctuations in the biochemical reaction systems within the context of intracellular processes associated with gene expression. We take the molecular reactions pertaining to circadian rhythms to develop models of molecular fluctuations in this chapter. There are a significant number of studies on stochastic fluctuations in intracellular genetic regulatory networks based on single cell-level experiments. In order to understand the fluctuations associated with the gene expression in circadian rhythm networks, it is important to model the interactions of transcriptional factors with the E-boxes in the promoter regions of some of the genes. The pertinent aspects of a near-equilibrium theory that would integrate the thermodynamical and particle dynamic characteristics of intracellular molecular fluctuations would be discussed, and the theory is extended by using the theory of stochastic differential equations. We then model the fluctuations associated with the promoter regions using general mathematical settings. We implemented ubiquitous Gillespie's algorithms, which are used to simulate stochasticity in biochemical networks, for each of the motifs. Both the theory and the Gillespie's algorithms gave the same results in terms of the time evolution of means and variances of molecular numbers. As biochemical reactions occur far away from equilibrium-hence the use of the Gillespie algorithm-these results suggest that the near-equilibrium theory should be a good approximation for some of the biochemical reactions. © 2011 Elsevier Inc. All rights reserved.

  1. The Nine-Step Minnesota Grading System for Eyebank Eyes With Age Related Macular Degeneration: A Systematic Approach to Study Disease Stages.

    Science.gov (United States)

    Olsen, Timothy W; Liao, Albert; Robinson, Hershonna S; Palejwala, Neal V; Sprehe, Nicholas

    2017-10-01

    To refine the Minnesota Grading System (MGS) using definitions from the Age-Related Eye Disease Studies (AREDS) into a nine-step grading scale (MGS-9). A nine-step grading scale descriptive analysis using three key phenotypic features (total drusen area, increased, and decreased pigmentation) of human eyebank eyes that were graded according to definitions from the AREDS criteria in order to harmonize studies of disease progression for research involving human tissue. From 2005 through February 2017, we have analyzed 1159 human eyes, procured from two eyebanks. Each macula was imaged using high-resolution, stereoscopic color fundus photography with both direct- and transillumination. Fundus images were digitally overlaid with a grading template and triangulated for foveal centration. We documented and stratified risk for each globe by applying the AREDS nine-step grading scale to the key clinical features from the MGS-9. We found a good distribution within the MGS categories (1-9) with few level eight globes. Eyes were processed within 12.1 ± 6.3, hours from the time of death through imaging, dissection, and freezing or fixation. Applying the MGS-9 to 331 pairs (662 eyes were simultaneously graded), 84% were within one-grading step and 93% within two steps of the fellow eye. We also document reticular pseudodrusen, basal laminar drusen, and pattern dystrophy. The MGS nine-step grading scale enables researchers using human tissue to refine the risk assessment of donor tissue. This analysis will harmonize results among researchers when grading human tissue using MGS criteria. Most importantly, the MGS-9 links directly to the known risk for progression from the AREDS.

  2. Validation of the American Board of Orthodontics Objective Grading System for assessing the treatment outcomes of Chinese patients.

    Science.gov (United States)

    Song, Guang-Ying; Baumrind, Sheldon; Zhao, Zhi-He; Ding, Yin; Bai, Yu-Xing; Wang, Lin; He, Hong; Shen, Gang; Li, Wei-Ran; Wu, Wei-Zi; Ren, Chong; Weng, Xuan-Rong; Geng, Zhi; Xu, Tian-Min

    2013-09-01

    Orthodontics in China has developed rapidly, but there is no standard index of treatment outcomes. We assessed the validity of the American Board of Orthodontics Objective Grading System (ABO-OGS) for the classification of treatment outcomes in Chinese patients. We randomly selected 108 patients who completed treatment between July 2005 and September 2008 in 6 orthodontic treatment centers across China. Sixty-nine experienced Chinese orthodontists made subjective assessments of the end-of-treatment casts for each patient. Three examiners then used the ABO-OGS to measure the casts. Pearson correlation analysis and receiver operating characteristic curve analysis were conducted to evaluate the correspondence between the ABO-OGS cast measurements and the orthodontists' subjective assessments. The average subjective grading scores were highly correlated with the ABO-OGS scores (r = 0.7042). Four of the 7 study cast components of the ABO-OGS score-occlusal relationship, overjet, interproximal contact, and alignment-were statistically significantly correlated with the judges' subjective assessments. Together, these 4 accounted for 58% of the variability in the average subjective grading scores. The ABO-OGS cutoff score for cases that the judges deemed satisfactory was 16 points; the corresponding cutoff score for cases that the judges considered acceptable was 21 points. The ABO-OGS is a valid index for the assessment of treatment outcomes in Chinese patients. By comparing the objective scores on this modification of the ABO-OGS with the mean subjective assessment of a panel of highly qualified Chinese orthodontists, a cutoff point for satisfactory treatment outcome was defined as 16 points or fewer, with scores of 16 to 21 points denoting less than satisfactory but still acceptable treatment. Cases that scored greater than 21 points were considered unacceptable. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  3. Grading nuclear, cortical and posterior subcapsular cataracts using an objective scatter index measured with a double-pass system.

    Science.gov (United States)

    Vilaseca, Meritxell; Romero, Maria José; Arjona, Montserrat; Luque, Sergio Oscar; Ondategui, Juan Carlos; Salvador, Antoni; Güell, José L; Artal, Pablo; Pujol, Jaume

    2012-09-01

    To evaluate objectively intraocular scattering in eyes with nuclear, cortical and posterior subcapsular cataracts by means of an objective scatter index (OSI) obtained from double-pass images. To compare the results with those obtained using clinical conventional procedures. In this prospective, observational, cross-sectional, non-consecutive case series study, 188 eyes with cataracts of 136 patients were analysed (123 eyes had nuclear, 41 eyes had cortical and 24 eyes had posterior subcapsular cataracts). The control group consisted of 117 eyes of 68 healthy patients. Patient examination included subjective refraction, best spectacle-corrected visual acuity (BSCVA), cataract grade using the lens opacities classification system III (LOCS III) and OSI. We found a decrease in the BSCVA and an increase in the OSI with increasing cataract grade. Statistically significant differences were observed when the OSI of eyes without cataracts and those with different LOCS III were compared. The comparison between the OSI and LOCS III reported good percentages of agreement regarding the number of eyes classified in equivalent levels: 72.4% (nuclear cataracts), 86.6% (cortical cataracts) and 84.3% (posterior subcapsular cataracts). A non-linear regression model was applied between OSI and BSCVA, which resulted in the following multiple correlation coefficients: r=0.878 (nuclear), r=0.843 (cortical) and r=0.844 (posterior subcapsular). The results of the study showed that OSI is a useful parameter for evaluating large amounts of intraocular scattering that can be used, in combination with other conventional procedures, as a valuable tool in clinical practice to grade cataracts objectively.

  4. Employee reactions to the use of management control systems in hospitals: motivation vs. threat.

    Science.gov (United States)

    Lopez-Valeiras, Ernesto; Gomez-Conde, Jacobo; Lunkes, Rogerio Joao

    Management control systems (such as budgets or balanced scorecards) are formal procedures used by managers to promote employee behavior aligned with organisational objectives. Employees may react to these control systems by either becoming more motivated or perceiving them as a threat. The aim of this paper is to determine the extent to which hospital ownership (public or private), professional group (physician, nurse, pharmacist or administrative employee), type of contract (fixed or temporary), gender and tenure can condition employee reaction to management control systems. We conducted the study in the three largest hospitals in the State of Santa Catarina (Brazil), two public (federal and state-owned) and one private (non-profit organisation). Physicians, nurses, pharmacists and administrative employees received a questionnaire between October 2013 and January 2014 concerning their current perceptions. We obtained 100 valid responses and conducted an ANOVA variance analysis. Our results show that the effect of management control systems on employees differs according to hospital ownership, professional group and type of contract. However, no significant evidence was found concerning gender or tenure. The results obtained contribute to creating specific knowledge on the reactions of employees to the use of management control systems in hospitals. This information may be important in adapting management control systems to the characteristics of the hospital and its employees, which may in turn contribute to reducing dysfunctional worker behavior. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  5. Waterhammer Modeling for the Ares I Upper Stage Reaction Control System Cold Flow Development Test Article

    Science.gov (United States)

    Williams, Jonathan H.

    2010-01-01

    The Upper Stage Reaction Control System provides three-axis attitude control for the Ares I launch vehicle during active Upper Stage flight. The system design must accommodate rapid thruster firing to maintain the proper launch trajectory and thus allow for the possibility to pulse multiple thrusters simultaneously. Rapid thruster valve closure creates an increase in static pressure, known as waterhammer, which propagates throughout the propellant system at pressures exceeding nominal design values. A series of development tests conducted in the fall of 2009 at Marshall Space Flight Center were performed using a water-flow test article to better understand fluid performance characteristics of the Upper Stage Reaction Control System. A subset of the tests examined waterhammer along with the subsequent pressure and frequency response in the flight-representative system and provided data to anchor numerical models. This thesis presents a comparison of waterhammer test results with numerical model and analytical results. An overview of the flight system, test article, modeling and analysis are also provided.

  6. A Computer Vision System for Automated Grading of Rough Hardwood Lumber Using a Knowledge-Based Approach

    Science.gov (United States)

    Tai-Hoon Cho; Richard W. Conners; Philip A. Araman

    1990-01-01

    A sawmill cuts logs into lumber and sells this lumber to secondary remanufacturers. The price a sawmiller can charge for a volume of lumber depends on its grade. For a number of species the price of a given volume of material can double in going from one grade to the next higher grade. Thus, accurately establishing the grade of a volume of hardwood lumber is very...

  7. An Immunosensing System Using Stilbene Glycoside as a Fluorogenic Substrate for an Enzymatic Reaction Model

    Directory of Open Access Journals (Sweden)

    Ya-Fei Tan

    2008-09-01

    Full Text Available A natural product, stilbene glycoside (2,3,5,4’-tetrahydroxydiphenylethylene-2-O-glucoside, TBG, has been evaluated for the first time as a potential substrate for horseradish peroxidase (HRP-catalyzed fluorogenic reactions. The properties of TBG as a fluorogenic substrate for HRP and its application in a fluorometric enzyme-linked immunosensing system were compared with commercially available substrates such as p-hydroxyphenylpropionic acid (pHPPA, chavicol and Amplex red using Brucella melitensis antibody (BrAb as a model analyte. The immunosensing body based on HRP-BrAb was constructed by dispersing graphite, BrAg and paraffin wax at room temperature. In a competitive immunoassay procedure, the BrAb competed with HRP-BrAb to react with the immobilized BrAg. In the enzymatic reaction, the binding HRP-BrAb on the sensing body surface can catalyze the polymerization reaction of TBG by H2O2 forming fluorescent dimers and causing an increase in fluorescence intensity. TBG showed comparable ability for HRP detection and its enzyme-linked immunosensing reaction system, in a linear detection ranging of 3.5´10-8~7.6´10-6g/L and with a detection limit of 1.7´10-9 g/L. The immobilized biocomposite surface could be regenerated with excellent reproducibility (RSD=3.8% by simply polishing with an alumina paper. The proposed immunosensing system has been used to determine the BrAb in rabbit serum samples with satisfactory results.

  8. The fabrication process of ceramic grade UO2 powder via fluorid system AUC and the treatment on AUC precipitation filtrate

    International Nuclear Information System (INIS)

    Liu Jinhong; Xu Kui; Li Zhiwan; Yi Wei; Tang Yueming; Li Guangrong; Lei Maolin; Cui Chuanjiang

    2006-10-01

    It is described about the technology of fabricating AUC powder by Circum-fluence Precipitation Reactor with Gas (CPRG) from UF 6 hydrolyzed liquid, manufacturing nuclear pure ceramic grade UO 2 powder via fluorid system AUC process with fluidized bed method, recovering U(VI) with ion exchange resin, depositing fluorin in an outflow of effusion wastewater from the ion exchange using calces. The primary control parameters on the fabricating AUC powder is study, it is discussed to character difference of AUC powder between fluorid system and nitrate. Result show that the composing the manufacture AUC powder is invariable by CORG, and that the AUC quality is consistent, and that by decomposition and reduction of AUC and stabilization of UO 2 powder with fluidized bed, through optimum technological parameters, the excellent UO 2 powder is obtained on the quality. (authors)

  9. Developing Seventh Grade Students' Understanding of Complex Environmental Problems with Systems Tools and Representations: a Quasi-experimental Study

    Science.gov (United States)

    Doganca Kucuk, Zerrin; Saysel, Ali Kerem

    2017-03-01

    A systems-based classroom intervention on environmental education was designed for seventh grade students; the results were evaluated to see its impact on the development of systems thinking skills and standard science achievement and whether the systems approach is a more effective way to teach environmental issues that are dynamic and complex. A quasi-experimental methodology was used to compare performances of the participants in various dimensions, including systems thinking skills, competence in dynamic environmental problem solving and success in science achievement tests. The same pre-, post- and delayed tests were used with both the comparison and experimental groups in the same public middle school in Istanbul. Classroom activities designed for the comparison group (N = 20) followed the directives of the Science and Technology Curriculum, while the experimental group (N = 22) covered the same subject matter through activities benefiting from systems tools and representations such as behaviour over time graphs, causal loop diagrams, stock-flow structures and hands-on dynamic modelling. After a one-month systems-based instruction, the experimental group demonstrated significantly better systems thinking and dynamic environmental problem solving skills. Achievement in dynamic problem solving was found to be relatively stable over time. However, standard science achievement did not improve at all. This paper focuses on the quantitative analysis of the results, the weaknesses of the curriculum and educational implications.

  10. Design and Stability of an On-Orbit Attitude Control System Using Reaction Control Thrusters

    Science.gov (United States)

    Hall, Robert A.; Hough, Steven; Orphee, Carolina; Clements, Keith

    2016-01-01

    Basic principles for the design and stability of a spacecraft on-orbit attitude control system employing on-off Reaction Control System (RCS) thrusters are presented. Both vehicle dynamics and the control system actuators are inherently nonlinear, hence traditional linear control system design approaches are not directly applicable. This paper has two main aspects: It summarizes key RCS design principles from earlier NASA vehicles, notably the Space Shuttle and Space Station programs, and introduces advances in the linear modelling and analyses of a phase plane control system derived in the initial development of the NASA's next upper stage vehicle, the Exploration Upper Stage (EUS). Topics include thruster hardware specifications, phase plane design and stability, jet selection approaches, filter design metrics, and RCS rotational maneuver logic.

  11. Nonlinear waves in reaction-diffusion systems: The effect of transport memory

    International Nuclear Information System (INIS)

    Manne, K. K.; Hurd, A. J.; Kenkre, V. M.

    2000-01-01

    Motivated by the problem of determining stress distributions in granular materials, we study the effect of finite transport correlation times on the propagation of nonlinear wave fronts in reaction-diffusion systems. We obtain results such as the possibility of spatial oscillations in the wave-front shape for certain values of the system parameters and high enough wave-front speeds. We also generalize earlier known results concerning the minimum wave-front speed and shape-speed relationships stemming from the finiteness of the correlation times. Analytic investigations are made possible by a piecewise linear representation of the nonlinearity. (c) 2000 The American Physical Society

  12. Spatiotemporal chaos of self-replicating spots in reaction-diffusion systems.

    Science.gov (United States)

    Wang, Hongli; Ouyang, Qi

    2007-11-23

    The statistical properties of self-replicating spots in the reaction-diffusion Gray-Scott model are analyzed. In the chaotic regime of the system, the spots that dominate the spatiotemporal chaos grow and divide in two or decay into the background randomly and continuously. The rates at which the spots are created and decay are observed to be linearly dependent on the number of spots in the system. We derive a probabilistic description of the spot dynamics based on the statistical independence of spots and thus propose a characterization of the spatiotemporal chaos dominated by replicating spots.

  13. Modulated molecular beam mass spectrometry: A generalized expression for the ''reaction product vector'' for linear systems

    International Nuclear Information System (INIS)

    Chang, H.; Weinberg, W.H.

    1977-01-01

    A generalized expression is developed that relates the ''reaction product vector'', epsilon exp(-iphi), to the kinetic parameters of a linear system. The formalism is appropriate for the analysis of modulated molecular beam mass spectrometry data and facilitates the correlation of experimental results to (proposed) linear models. A study of stability criteria appropriate for modulated molecular beam mass spectrometry experiments is also presented. This investigation has led to interesting inherent limitations which have not heretofore been emphasized, as well as a delineation of the conditions under which stable chemical oscillations may occur in the reacting system

  14. Existence and exponential stability of traveling waves for delayed reaction-diffusion systems

    Science.gov (United States)

    Hsu, Cheng-Hsiung; Yang, Tzi-Sheng; Yu, Zhixian

    2018-03-01

    The purpose of this work is to investigate the existence and exponential stability of traveling wave solutions for general delayed multi-component reaction-diffusion systems. Following the monotone iteration scheme via an explicit construction of a pair of upper and lower solutions, we first obtain the existence of monostable traveling wave solutions connecting two different equilibria. Then, applying the techniques of weighted energy method and comparison principle, we show that all solutions of the Cauchy problem for the considered systems converge exponentially to traveling wave solutions provided that the initial perturbations around the traveling wave fronts belong to a suitable weighted Sobolev space.

  15. Nonlinear waves in reaction-diffusion systems: The effect of transport memory

    Science.gov (United States)

    Manne, K. K.; Hurd, A. J.; Kenkre, V. M.

    2000-04-01

    Motivated by the problem of determining stress distributions in granular materials, we study the effect of finite transport correlation times on the propagation of nonlinear wave fronts in reaction-diffusion systems. We obtain results such as the possibility of spatial oscillations in the wave-front shape for certain values of the system parameters and high enough wave-front speeds. We also generalize earlier known results concerning the minimum wave-front speed and shape-speed relationships stemming from the finiteness of the correlation times. Analytic investigations are made possible by a piecewise linear representation of the nonlinearity.

  16. [The adaptation reactions in hormonal systems to the internal use of mineral waters].

    Science.gov (United States)

    Polushina, N D

    1991-01-01

    A single intake of mineral water Essentuki 17 by male Wistar rats (n-130, b. w. 180-250 g) leads to stress reactions. It is evident from elevated levels of ACTH, hydrocortisone, leuenkephaline, glucagon and gastrin. Course intake of the water brings about a rise in most of the hormones levels studied. However, single doses of Essentuki 17 inhibit production of hormones in the adrenals, hypophysis, hypothalamus, the system of endogenic opiates. The enhancement of relevant levels are noted in the gastroenteropancreatic system.

  17. Developing Seventh Grade Students' Understanding of Complex Environmental Problems with Systems Tools and Representations: A Quasi-Experimental Study

    Science.gov (United States)

    Doganca Kucuk, Zerrin; Saysel, Ali Kerem

    2018-01-01

    A systems-based classroom intervention on environmental education was designed for seventh grade students; the results were evaluated to see its impact on the development of systems thinking skills and standard science achievement and whether the systems approach is a more effective way to teach environmental issues that are dynamic and complex. A…

  18. Nuclear-reaction studies via the observation of unbound outgoing systems

    International Nuclear Information System (INIS)

    Bice, A.N.

    1982-01-01

    The mechanisms involved in the production of fast α-particles in 12 C induced reactions have been investigated for the 12 C + 208 Pb system at bombarding energies of E( 12 C) = 132, 187 and 230 MeV. Absolute cross sections have been determined for the reactions 208 Pb ( 12 C, 8 Be (g.s.)), 208 Pb( 12 C, 8 Be (2.94 MeV)) and 208 Pb ( 12 C, 12 C* → α + 8 Be) by double and triple coincidence measurements of the sequential decay α-particles. Inclusive α-particle production cross sections were also measured at E ( 12 C) = 187 MeV for comparison. It is found that the simple inelastic scattering process ( 12 C, 12 C* → α + 8 Be) does not contribute significantly to the production of fast α-particles but that the production of 8 Be nuclei by projectile fragmentation is an important source of α-particles. At the highest bombarding energy investigated (19 MeV/A) it appears that the 12 C → 3α fragmentation reaction becomes more prominent at the expense of the 12 C → α + 8 Be fragmentation channel. It is concluded that projectile spectroscopic properties and/or final state interactions are important in fragmentation reactions for these bombarding energies. In a kinematically complete experiment the direct and the sequential breakup channels of 10 MeV/A 7 Li projectiles have been investigated with 12 C and 208 Pb targets. By appropriate arrangement of detector telescopes it was possible to define a kinematical window which allowed for the unambigious observation of both the direct (to the α-t continuum) and the sequential components of a heavy-ion projectile breakup reaction. A semiclassical Monte Carlo type projectile breakup calculation was constructed which qualitatively reproduced the measured α-t coincidence cross section as a function of the laboratory angle

  19. Let's End the Grading Game.

    Science.gov (United States)

    Edwards, Clifford H.; Edwards, Laurie

    1999-01-01

    Argues that grades have negative effects on learning and self-concept. States that while grading has a long tradition of sorting children for college entrance, there is limited evidence that grades serve a valid purpose. Argues that this practice should be abolished and an evaluation system established that provides a more valid estimate of…

  20. Evolution of the Maillard Reaction in Glutamine or Arginine-Dextrinomaltose Model Systems

    Directory of Open Access Journals (Sweden)

    Silvia Pastoriza

    2016-12-01

    Full Text Available Enteral formulas are foods designed for medical uses to feed patients who are unable to eat normally. They are prepared by mixing proteins, amino acids, carbohydrates and fats and submitted to sterilization. During thermal treatment, the Maillard reaction takes place through the reaction of animo acids with reducing sugars. Thus, although glutamine and arginine are usually added to improve the nutritional value of enteral formulas, their final concentration may vary. Thus, in the present paper the early, intermediate, and advanced states of the Maillard reaction were studied in model systems by measuring loss of free amino acids through the decrease of fluorescence intensity with o-phtaldialdehyde (OPA, 5-Hydroximethylfurfural (HMF, furfural, glucosylisomaltol, fluorescence, and absorbance at 420 nm. The systems were prepared by mixing glutamine or arginine with dextrinomaltose (similar ingredients to those used in special enteral formula, and heated at 100 °C, 120 °C and 140 °C for 0 to 30 min. The recorded changes in the concentration of furanic compounds was only useful for longer heating times of high temperatures, while absorbance and fluorescence measurements were useful in all the assayed conditions. In addition, easiness and sensitivity of absorbance and fluorescence make them useful techniques that could be implemented as indicators for monitoring the manufacture of special enteral formulas. Glucosylisomaltol is a useful indicator to monitor the manufacture of glutamine-enriched enteral formulas.

  1. Magnetic field effects on geminate reactions. Study of anthraquinone - hydrogen donors systems

    International Nuclear Information System (INIS)

    Vidal, Marie-Helene

    1987-01-01

    This study is devoted to magnetic field effects on chemical reactions which involve a radical pair with correlated spins (radical in a 'cage'). In the first part, the radical pair theory is described: mechanisms of singlet-triplet mixing, the different interactions inside the pair and a quantum mechanical treatment of the radical pair. The details of the experimental method (nanosecond laser flash photolysis) are reported in the second part. In the third part are shown experimental results obtained on Anthraquinone (AQ) - Hydrogen donors systems: - There is no magnetic field effect in homogeneous solution even at a high viscosity. The absorption spectra of the different reaction intermediates are obtained. - However a magnetic field effect is put forward when AQ is introduced in SDS micelles which are hydrogen donors. The absorption spectrum of the AQH · . semi-quinone radical in 'cage' is shown and a mechanism is proposed for its disappearance to generate the AQH-S and AQH 2 species. - The addition of 9, 10 Dihydroanthracene (DH2) inside the micelle near AQ induces an increase of the magnetic field effect by creation of (AQH · . - DH · . ) pairs which diffuse slowly. - Fixed radical pairs in a protein matrix were studied in reaction centers of photosynthetic bacteria: in that case, the half effect field is shifted to low fields when compared to the previously described systems. (author) [fr

  2. Evolution of the Maillard Reaction in Glutamine or Arginine-Dextrinomaltose Model Systems.

    Science.gov (United States)

    Pastoriza, Silvia; Rufián-Henares, José Ángel; García-Villanova, Belén; Guerra-Hernández, Eduardo

    2016-12-07

    Enteral formulas are foods designed for medical uses to feed patients who are unable to eat normally. They are prepared by mixing proteins, amino acids, carbohydrates and fats and submitted to sterilization. During thermal treatment, the Maillard reaction takes place through the reaction of animo acids with reducing sugars. Thus, although glutamine and arginine are usually added to improve the nutritional value of enteral formulas, their final concentration may vary. Thus, in the present paper the early, intermediate, and advanced states of the Maillard reaction were studied in model systems by measuring loss of free amino acids through the decrease of fluorescence intensity with o -phtaldialdehyde (OPA), 5-Hydroximethylfurfural (HMF), furfural, glucosylisomaltol, fluorescence, and absorbance at 420 nm. The systems were prepared by mixing glutamine or arginine with dextrinomaltose (similar ingredients to those used in special enteral formula), and heated at 100 °C, 120 °C and 140 °C for 0 to 30 min. The recorded changes in the concentration of furanic compounds was only useful for longer heating times of high temperatures, while absorbance and fluorescence measurements were useful in all the assayed conditions. In addition, easiness and sensitivity of absorbance and fluorescence make them useful techniques that could be implemented as indicators for monitoring the manufacture of special enteral formulas. Glucosylisomaltol is a useful indicator to monitor the manufacture of glutamine-enriched enteral formulas.

  3. Significance of grafting in radiation curing reactions. Comparison of ionising radiation and UV systems

    International Nuclear Information System (INIS)

    Zilic, E.; Ng, L.; Viengkhou, V.; Garnett, J.L.

    1998-01-01

    Full text: Radiation curing is now an accepted commercial technology where both ionising radiation (electron beam) and ultra violet light (UV) sources are used. Grafting is essentially the copolymerisation of a monomer/oligomer to a backbone polymer whereas curing is the rapid polymerisation of a monomer/oligomer mixture onto the surface of the substrate. There is no time scale theoretically associated with grafting processes which can occur in minutes or hours whereas curing reactions are usually very rapid, occurring within a fraction of a second. An important difference between grafting and curing is the nature of the bonding occurring in each process. In grafting covalent carbon-carbon bonds are formed, whereas in curing, bonding usually involves weaker Van der Waals or London dispersion forces. The bonding properties of the systems are important in determining their use commercially. Thus the possibility that concurrent grafting during curing could occur in a system is important since if present, grafting would not only minimise delamination of the coated product but could also, in some circumstances, render difficulties recycling of the finished product especially if it were cellulosic. Hence the conditions for observing the occurrence of concurrent grafting during radiation curing are important. In the present paper, this problem has been studied by examining the effect that the components used in radiation curing exert on a typical reaction. Instead of electron beam sources, the spent fuel element facility at Lucas Heights is used to simulate such ionising radiation sources. The model system utilised is the grafting of a typical methacrylate to cellulose. This is the generic chemistry used in curing systems. The effect of typical additives from curing systems including polyfunctional monomer and oligomers in the grafting reactions have been studied. The ionising radiation results have been compared with analogous data from UV experiments. The significance

  4. Performance Evaluation of Waterproofing Membrane Systems Subject to the Concrete Joint Load Behavior of Below-Grade Concrete Structures

    Directory of Open Access Journals (Sweden)

    Jaeyoung Song

    2017-11-01

    Full Text Available Below-grade structures such as parking lots, underground subway tunnels, and basements are growing in scale and reaching deeper below-ground levels. In this type of environment, they become subject to higher water pressure. The concrete material of the structures is exposed to wet conditions for longer periods of time, which makes the proper adhesion of waterproofing membranes difficult. Joint movements from increased structural settlement, thermal expansion/shrinkage, and physical loads from external sources (e.g., vehicles make securing durable waterproofing challenging. While ASTM Guides, Korean Codes, and BS Practice Codes on below-grade waterproofing stress the importance of manufacturer specification for quality control, ensuring high quality waterproofing for the ever-changing scale of construction remains a challenge. This study proposes a new evaluation method and criteria which allow for the selection of waterproofing membranes based on specific performance attributes and workmanship. It subjects six different waterproofing membrane systems (installed on dry and wet surface conditioned mortar slab specimens with an artificial joint to different cyclic movement widths to 300 cycles in water to demonstrate that inadequate material properties and workmanship are key causes for leakages.

  5. Anomalous dimension in a two-species reaction-diffusion system

    Science.gov (United States)

    Vollmayr-Lee, Benjamin; Hanson, Jack; McIsaac, R. Scott; Hellerick, Joshua D.

    2018-01-01

    We study a two-species reaction-diffusion system with the reactions A+A\\to (0, A) and A+B\\to A , with general diffusion constants D A and D B . Previous studies showed that for dimensions d≤slant 2 the B particle density decays with a nontrivial, universal exponent that includes an anomalous dimension resulting from field renormalization. We demonstrate via renormalization group methods that the scaled B particle correlation function has a distinct anomalous dimension resulting in the asymptotic scaling \\tilde CBB(r, t) ˜ tφf(r/\\sqrt{t}) , where the exponent ϕ results from the renormalization of the square of the field associated with the B particles. We compute this exponent to first order in \

  6. Elastic scattering and total reaction cross section for the 6He +58Ni system

    Science.gov (United States)

    Morcelle, V.; Lichtenthäler, R.; Lépine-Szily, A.; Guimarães, V.; Mendes, D. R., Jr.; Pires, K. C. C.; de Faria, P. N.; Barioni, A.; Gasques, L.; Morais, M. C.; Shorto, J. M. B.; Zamora, J. C.; Scarduelli, V.; Condori, R. Pampa; Leistenschneider, E.

    2014-11-01

    Elastic scattering measurements of 6He + 58Ni system have been performed at the laboratory energy of 21.7 MeV. The 6He secondary beam was produced by a transfer reaction 9Be (7Li , 6He ) and impinged on 58Ni and 197Au targets, using the Radioactive Ion Beam (RIB) facility, RIBRAS, installed in the Pelletron Laboratory of the Institute of Physics of the University of São Paulo, Brazil. The elastic angular distribution was obtained in the angular range from 15° to 80° in the center of mass frame. Optical model calculations have been performed using a hybrid potential to fit the experimental data. The total reaction cross section was derived.

  7. Mode-locking in advection-reaction-diffusion systems: An invariant manifold perspective

    Science.gov (United States)

    Locke, Rory A.; Mahoney, John R.; Mitchell, Kevin A.

    2018-01-01

    Fronts propagating in two-dimensional advection-reaction-diffusion systems exhibit a rich topological structure. When the underlying fluid flow is periodic in space and time, the reaction front can lock to the driving frequency. We explain this mode-locking phenomenon using the so-called burning invariant manifolds (BIMs). In fact, the mode-locked profile is delineated by a BIM attached to a relative periodic orbit (RPO) of the front element dynamics. Changes in the type (and loss) of mode-locking can be understood in terms of local and global bifurcations of the RPOs and their BIMs. We illustrate these concepts numerically using a chain of alternating vortices in a channel geometry.

  8. The study of thermodynamic properties and transport properties of multicomponent systems with chemical reactions

    Directory of Open Access Journals (Sweden)

    Samujlov E.

    2013-04-01

    Full Text Available In case of system with chemical reaction the most important properties are heat conductivity and heat capacity. In this work we have considered the equation for estimate the component of these properties caused by chemical reaction and ionization processes. We have evaluated the contribution of this part in heat conductivity and heat capacity too. At the high temperatures contribution in heat conductivity from ionization begins to play an important role. We have created a model, which describe partial and full ionization of gases and gas mixtures. In addition, in this work we present the comparison of our result with experimental data and data from numerical simulation. We was used the data about transport properties of middle composition of Russian coals and the data of thermophysical properties of natural gas for comparison.

  9. Thermodynamic Vent System for an On-Orbit Cryogenic Reaction Control Engine

    Science.gov (United States)

    Hurlbert, Eric A.; Romig, Kris A.; Jimenez, Rafael; Flores, Sam

    2012-01-01

    A report discusses a cryogenic reaction control system (RCS) that integrates a Joule-Thompson (JT) device (expansion valve) and thermodynamic vent system (TVS) with a cryogenic distribution system to allow fine control of the propellant quality (subcooled liquid) during operation of the device. It enables zero-venting when coupled with an RCS engine. The proper attachment locations and sizing of the orifice are required with the propellant distribution line to facilitate line conditioning. During operations, system instrumentation was strategically installed along the distribution/TVS line assembly, and temperature control bands were identified. A sub-scale run tank, full-scale distribution line, open-loop TVS, and a combination of procured and custom-fabricated cryogenic components were used in the cryogenic RCS build-up. Simulated on-orbit activation and thruster firing profiles were performed to quantify system heat gain and evaluate the TVS s capability to maintain the required propellant conditions at the inlet to the engine valves. Test data determined that a small control valve, such as a piezoelectric, is optimal to provide continuously the required thermal control. The data obtained from testing has also assisted with the development of fluid and thermal models of an RCS to refine integrated cryogenic propulsion system designs. This system allows a liquid oxygenbased main propulsion and reaction control system for a spacecraft, which improves performance, safety, and cost over conventional hypergolic systems due to higher performance, use of nontoxic propellants, potential for integration with life support and power subsystems, and compatibility with in-situ produced propellants.

  10. Development of a pneumatic transport system for bulk transfer of metal grade uranium oxide powder

    International Nuclear Information System (INIS)

    Manna, S.; Satpati, S.K.; Roy, S.B.

    2010-01-01

    Uranium oxide powder is a commonly handled ceramic powder in nuclear industries. Design of the powder transfer system is an important aspect because of some of its typical characteristics. Pneumatic transport system has been widely used in transferring powder from one place to another. A pneumatic transport system using vacuum has been presented in the paper. This is used for bulk transfer of UO 3 powder. The system consists of a cyclone separator and filter cloth at the top of the cyclone separator. The pneumatic transfer system provides high efficiency with sustainable performance and it is a compact, robust, handy and moveable unit. No degradation of the powder quality has been observed during transfer. The system provides highly efficient, easy and safe transfer of radioactive powder, better working environment for the operator. (author)

  11. Advanced Thermal Protection Systems (ATPS), Aerospace Grade Carbon Bonded Carbon Fiber Material, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Carbon bonded carbon fiber (CBCF) insulating material is the basis for several highly successful NASA developed thermal protection systems (TPS). Included among...

  12. The Norwegian National Reporting System and Register of Severe Allergic Reactions to Food

    Directory of Open Access Journals (Sweden)

    Martinus Løvik

    2009-10-01

    Full Text Available The Norwegian National Reporting System and Register of Severe Allergic Reactions to Food, or the Food Allergy Register, is a nation-wide, government-funded permanent reporting and registration system for severe allergic reactions to food. The Food Allergy Register collects information based on a one-page reporting form, serum samples for specific IgE analysis, and food samples for food allergen analysis. Reporting physicians receive in return an extensive commentary on the reported case and the relevant allergies, and results of the specific IgE analysis and food allergen analysis.The Food Allergy Register has, after being active for a little more than four years, given valuable information about several important aspects of food allergy in Norway. The Food Allergy Register has revealed food safety problems in relation to allergy that probably could be discovered only with the help of a systematic, nation-wide registration of cases. The reactions of peanut allergic individuals to lupine flour in bakery products is an example of how the Food Allergy Register is able to reveal potentially serious problems that would otherwise probably have gone unnoticed and certainly unexplained. The amount and the value of the information from the Food Allergy Register are increasing as new reports of more cases are added. The typical Norwegian patient with a severe allergic reaction to food appears to be a young adult, female rather than male. The offending meal is consumed at a restaurant or fast-food stand or in a private party away from home, and peanuts, nuts and shellfish are among the most common offending foods, while fish allergy appears to be rather rare.

  13. Brake reactions of distracted drivers to pedestrian Forward Collision Warning systems.

    Science.gov (United States)

    Lubbe, Nils

    2017-06-01

    Forward Collision Warning (FCW) can be effective in directing driver attention towards a conflict and thereby aid in preventing or mitigating collisions. FCW systems aiming at pedestrian protection have been introduced onto the market, yet an assessment of their safety benefits depends on the accurate modeling of driver reactions when the system is activated. This study contributes by quantifying brake reaction time and brake behavior (deceleration levels and jerk) to compare the effectiveness of an audio-visual warning only, an added haptic brake pulse warning, and an added Head-Up Display in reducing the frequency of collisions with pedestrians. Further, this study provides a detailed data set suited for the design of assessment methods for car-to-pedestrian FCW systems. Brake response characteristics were measured for heavily distracted drivers who were subjected to a single FCW event in a high-fidelity driving simulator. The drivers maintained a self-regulated speed of 30km/h in an urban area, with gaze direction diverted from the forward roadway by a secondary task. Collision rates and brake reaction times differed significantly across FCW settings. Brake pulse warnings resulted in the lowest number of collisions and the shortest brake reaction times (mean 0.8s, SD 0.29s). Brake jerk and deceleration were independent of warning type. Ninety percent of drivers exceeded a maximum deceleration of 3.6m/s 2 and a jerk of 5.3m/s 3 . Brake pulse warning was the most effective FCW interface for preventing collisions. In addition, this study presents the data required for driver modeling for car-to-pedestrian FCW similar to Euro NCAP's 2015 car-to-car FCW assessment. Practical applications: Vehicle manufacturers should consider the introduction of brake pulse warnings to their FCW systems. Euro NCAP could introduce an assessment that quantifies the safety benefits of pedestrian FCW systems and thereby aid the proliferation of effective systems. Copyright © 2017

  14. International society of neuropathology-haarlem consensus guidelines for nervous system tumor classification and grading

    NARCIS (Netherlands)

    Louis, D.N.; Perry, A.; Burger, P.; Ellison, D.W.; Reifenberger, G.; Deimling, A. Von; Aldape, K.; Brat, D.; Collins, V.P.; Eberhart, C.; Figarella-Branger, D.; Fuller, G.N.; Giangaspero, F.; Giannini, C.; Hawkins, C.; Kleihues, P.; Korshunov, A.; Kros, J.M.; Lopes, M. Beatriz; Ng, H.K.; Ohgaki, H.; Paulus, W.; Pietsch, T.; Rosenblum, M.; Rushing, E.; Soylemezoglu, F.; Wiestler, O.; Wesseling, P.

    2014-01-01

    Major discoveries in the biology of nervous system tumors have raised the question of how non-histological data such as molecular information can be incorporated into the next World Health Organization (WHO) classification of central nervous system tumors. To address this question, a meeting of

  15. Grading the Metrics: Performance-Based Funding in the Florida State University System

    Science.gov (United States)

    Cornelius, Luke M.; Cavanaugh, Terence W.

    2016-01-01

    A policy analysis of Florida's 10-factor Performance-Based Funding system for state universities. The focus of the article is on the system of performance metrics developed by the state Board of Governors and their impact on institutions and their missions. The paper also discusses problems and issues with the metrics, their ongoing evolution, and…

  16. Simulations of pattern dynamics for reaction-diffusion systems via SIMULINK.

    Science.gov (United States)

    Wang, Kaier; Steyn-Ross, Moira L; Steyn-Ross, D Alistair; Wilson, Marcus T; Sleigh, Jamie W; Shiraishi, Yoichi

    2014-04-11

    Investigation of the nonlinear pattern dynamics of a reaction-diffusion system almost always requires numerical solution of the system's set of defining differential equations. Traditionally, this would be done by selecting an appropriate differential equation solver from a library of such solvers, then writing computer codes (in a programming language such as C or Matlab) to access the selected solver and display the integrated results as a function of space and time. This "code-based" approach is flexible and powerful, but requires a certain level of programming sophistication. A modern alternative is to use a graphical programming interface such as Simulink to construct a data-flow diagram by assembling and linking appropriate code blocks drawn from a library. The result is a visual representation of the inter-relationships between the state variables whose output can be made completely equivalent to the code-based solution. As a tutorial introduction, we first demonstrate application of the Simulink data-flow technique to the classical van der Pol nonlinear oscillator, and compare Matlab and Simulink coding approaches to solving the van der Pol ordinary differential equations. We then show how to introduce space (in one and two dimensions) by solving numerically the partial differential equations for two different reaction-diffusion systems: the well-known Brusselator chemical reactor, and a continuum model for a two-dimensional sheet of human cortex whose neurons are linked by both chemical and electrical (diffusive) synapses. We compare the relative performances of the Matlab and Simulink implementations. The pattern simulations by Simulink are in good agreement with theoretical predictions. Compared with traditional coding approaches, the Simulink block-diagram paradigm reduces the time and programming burden required to implement a solution for reaction-diffusion systems of equations. Construction of the block-diagram does not require high-level programming

  17. Optimization of ISSR-PCR reaction system and selection of primers in Bryum argenteum

    Directory of Open Access Journals (Sweden)

    Ma Xiaoying

    2017-02-01

    Full Text Available In order to determine optimum ISSR-PCR reaction system for moss Bryum argenteum,the concentrations of template DNA primers,dNTPs,Mg2+ and Taq DNA polymerase were optimized in four levels by PCR orthogonal experimental method. The appropriate primers were screened from 100 primers by temperature gradient PCR,and the optimal anneal temperature of the screened primers were determined. The results showed that the optimized 20 μL ISSR-PCR reaction system was as follows:template DNA 20 ng/20 μL,primers 0.45 μmol/L,Mg2+2.65 mmol/L,Taq DNA polymerase 0.4 U/20 μL,dNTPs 0.45 mmol/L. Using this system,50 primers with clear bands,repeatability well and polymorphism highly were selected from 100 primers. The establishment of this system,the screened primers and the annealing temperature could provide a theoretical basis for further research on the genetic diversity of bryophytes using ISSR molecular markers.

  18. Heterogeneous redox reactions in groundwater flow systems - Investigation and application of two different coupled codes

    Energy Technology Data Exchange (ETDEWEB)

    Pfingsten, W.; Carnahan, C.L. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1995-05-01

    Two simulators of reactive chemical transport are applied to a set of problems involving heterogeneous reactions of uranium species. The simulators use similar algorithms to compute the heterogeneous chemical equilibria, but they use different approaches to the computation of solute transport and to the coupling of transport with chemical reactions. One simulator (MCOTAC) sequentially couples calculations of static chemical equilibria to a random-walk simulation of solute advection and dispersion. The other simulator (THCC) directly couples mass action relations for chemical equilibria to finite-difference representations of the solute transport equations. The aim of the comparison was to demonstrate the applicability of the newly developed code MCOTAC to redox problems, and to identify and investigate general differences between the two types of codes within these applications. The chosen heterogeneous redox systems are hypothetically generate systems which provide numerical difficulties within the coupled code calculation. Uranium, an important component of heterogeneous redox systems consisting of uraniferous solids and natural groundwaters, was chosen as a main component in the example redox systems because of practical interest for performance assessment of geological repositories for nuclear wastes. The calculations show reasonable agreement, in general, between the two computational approaches. Specific areas of disagreement arise from numerical difficulties to each approach. Such `benchmarking` can enhance confidence in the overall performance of individual simulators while identifying aspects that may require further investigations and possible modifications. (author) figs., tabs., 7 refs.

  19. FISSION 2120: a program for assessing the need for engineered safety feature grade air cleaning systems in post accident environments

    International Nuclear Information System (INIS)

    Martin, G. Jr.; Michlewicz, D.; Thomas, J.

    1979-01-01

    A computer program FISSION 2120, has been developed to evaluate the need for various engineered Safety Feature grade air cleaning systems to mitigate radiation exposures resulting from accidential releases of radioactivity. Those systems which are generally investigated include containment sprays with chemical additives, containment fan coolers with charcoal filters, and negative pressure maintenance systems for double barrier containments with either one-pass filtration or recirculation with filtration. The program can also be used to calculate the radiation doses to control room personnel. This type of analysis is directed towards the various protection aspects of the emergency ventilation system and involves the modeling of the radiological source terms and the atmospheric transport of the radioactive releases. The modeling is enhanced by the inherent capability of the program to accommodate simultaneous release of activity from several sources and to perform a dose evaluation for a wide range of the design characteristics of control room emergency air filtration systems. Use of the program has resulted in considerable savings in the time required to perform such analyses and in the selection of the most cost-effective Engineered Safety Features

  20. For Better or Worse? System-Justifying Beliefs in Sixth-Grade Predict Trajectories of Self-Esteem and Behavior Across Early Adolescence.

    Science.gov (United States)

    Godfrey, Erin B; Santos, Carlos E; Burson, Esther

    2017-06-19

    Scholars call for more attention to how marginalization influences the development of low-income and racial/ethnic minority youth and emphasize the importance of youth's subjective perceptions of contexts. This study examines how beliefs about the fairness of the American system (system justification) in sixth grade influence trajectories of self-esteem and behavior among 257 early adolescents (average age 11.4) from a diverse, low-income, middle school in an urban southwestern city. System justification was associated with higher self-esteem, less delinquent behavior, and better classroom behavior in sixth grade but worse trajectories of these outcomes from sixth to eighth grade. These findings provide novel evidence that system-justifying beliefs undermine the well-being of marginalized youth and that early adolescence is a critical developmental period for this process. © 2017 The Authors. Child Development © 2017 Society for Research in Child Development, Inc.