WorldWideScience

Sample records for reaction centre preparations

  1. Preparation of emergency care centre exercises

    International Nuclear Information System (INIS)

    Schnadt, H.; Miska, H.

    2011-01-01

    Setup and operation of emergency care centres (sometimes also addressed as emergency reception centres) are part of emergency response in the environs of nuclear power plants. The preparation of an exercise scenario for such a centre is very demanding on the responsible agency. Therefore, a computer code has been developed which helps to translate the exercise objectives into instructions for figurants which simulate the affected population. These instructions are intended to steer a determined flow of people through the emergency care centre by providing fictitious radiological readings and by injecting the demand for additional actions of response personnel by statements and questions. (orig.)

  2. International Network of Nuclear Reaction Data Centres

    International Nuclear Information System (INIS)

    Otsuka, Naohiko; Dunaeva, Svetlana

    2010-11-01

    The activities of fourteen nuclear data centres are summarized, and their cooperation under the auspices of the International Atomic Energy Agency is described. Each of the centres provides coverage for different geographical zones and/or specific types of nuclear data, thus together providing a complete service for users worldwide. The International Network of Nuclear Reaction Data Centres (NRDC) was established with the objective of providing nuclear physics databases that are required for nuclear technology (encompassing energy and non-energy applications) by coordinating the collection, compilation and dissemination of nuclear data on an international scale. (author)

  3. Target preparation at the ANTARES AMS Centre

    Energy Technology Data Exchange (ETDEWEB)

    Jacobsen, G E; Hua, Q; Fink, D; Hotchkis, M A.C.; Lawson, E M [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

    1997-12-31

    The Antares Accelerator Mass Spectroscopy Centre at ANSTO has two chemistry labs dedicated to preparing targets for measurement. Target preparation encompasses a variety of activities ranging from the curation of incoming samples to the numerous steps involved in the purification and processing of dissimilar samples. One of the two laboratories is set up for the physical and chemical pretreatment of {sup 14}C samples. Treatments include cleaning by sonification, sorting, grinding and sieving, and chemical treatments such as the standard AAA treatment, and solvent extraction. Combustion and graphitization are also carried out in this laboratory. The second laboratory is a clean room and is dedicated to the combustion, hydrolysis and graphitization of {sup 14}C samples as well as the process of the targets for the other isotopes. Combustion is achieved by heating the sample to 900 deg C in the presence of CuO, the resulting gas is purified by passing over Ag and Cu wire at 600 deg C. Graphitization is carried out by reducing the CO{sub 2} with an iron catalyst (600 deg C) in the presence of zinc (400 deg C) and a small amount of hydrogen. Samples such as charcoal, shell bone, wood, sediment, seawater and groundwater, containing 0.3-1 mg or more of original carbon, are processed routinely for radiocarbon analysis. The current {sup 14}C chemistry background for 1 mg carbon is {approx} 0.3 percent of modern carbon (pMC) enabling us to date materials up to 45 000 BP. Samples of 0.5 - 3 mg carbon or more are routinely performed with a precision < 1% At present, procedures are being tested for the treatment of samples containing a minimum of 20 {mu}g original carbon. Such small samples sre more likely to be affected by contamination with modern carbon. These laboratories are also being expanded to cater for the processing of a variety of samples for the measurement of other isotopes, ie {sup 129}I, {sup 10}Be, {sup 36}CI and {sup 26}Al. Initial tests for the extraction of

  4. Target preparation at the ANTARES AMS Centre

    Energy Technology Data Exchange (ETDEWEB)

    Jacobsen, G.E.; Hua, Q.; Fink, D.; Hotchkis, M.A.C.; Lawson, E.M. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

    1996-12-31

    The Antares Accelerator Mass Spectroscopy Centre at ANSTO has two chemistry labs dedicated to preparing targets for measurement. Target preparation encompasses a variety of activities ranging from the curation of incoming samples to the numerous steps involved in the purification and processing of dissimilar samples. One of the two laboratories is set up for the physical and chemical pretreatment of {sup 14}C samples. Treatments include cleaning by sonification, sorting, grinding and sieving, and chemical treatments such as the standard AAA treatment, and solvent extraction. Combustion and graphitization are also carried out in this laboratory. The second laboratory is a clean room and is dedicated to the combustion, hydrolysis and graphitization of {sup 14}C samples as well as the process of the targets for the other isotopes. Combustion is achieved by heating the sample to 900 deg C in the presence of CuO, the resulting gas is purified by passing over Ag and Cu wire at 600 deg C. Graphitization is carried out by reducing the CO{sub 2} with an iron catalyst (600 deg C) in the presence of zinc (400 deg C) and a small amount of hydrogen. Samples such as charcoal, shell bone, wood, sediment, seawater and groundwater, containing 0.3-1 mg or more of original carbon, are processed routinely for radiocarbon analysis. The current {sup 14}C chemistry background for 1 mg carbon is {approx} 0.3 percent of modern carbon (pMC) enabling us to date materials up to 45 000 BP. Samples of 0.5 - 3 mg carbon or more are routinely performed with a precision < 1% At present, procedures are being tested for the treatment of samples containing a minimum of 20 {mu}g original carbon. Such small samples sre more likely to be affected by contamination with modern carbon. These laboratories are also being expanded to cater for the processing of a variety of samples for the measurement of other isotopes, ie {sup 129}I, {sup 10}Be, {sup 36}CI and {sup 26}Al. Initial tests for the extraction of

  5. Japan Nuclear Reaction Data Centre (JCPRG), Progress Report

    International Nuclear Information System (INIS)

    Aikawa, M.

    2012-01-01

    In this report, we review the activities of Japan Nuclear Reaction Data Centre (JCPRG) since the last NRDC meeting in 2011. Our main objectives are as follows: a) Compilation of nuclear reaction data for two databases, NRDF and EXFOR b) Evaluation of astrophysical nuclear reaction data c) Development of software and systems d) Development of collaboration among Asian countries. (author)

  6. Japan Nuclear Reaction Data Centre (JCPRG) Progress Report

    International Nuclear Information System (INIS)

    2011-01-01

    In this report, we give a brief review of the activities carried out by the ''Japan Nuclear Reaction Data Centre (JCPRG)'' since the last NRDC meeting in 2009. The main subjects of our activities are; (1) reaction data compilation, (2) evaluation of the astrophysical nuclear reaction data for light nuclei, and (3) cooperation of nuclear data activities in Asia. Our activities in detail are as follows. a) New reaction data compilation (NRDF and EXFOR) b) Conversion of old NRDF to EXFOR c) Bibliography compilation (CINDA) d) Evaluation of astrophysical nuclear reaction data based on theoretical calculations for light nuclei e) Collaboration among nuclear data physicists in Asia for the EXFOR compilation to form a stable base f) Database maintenance and services (NRDF, EXFOR/ENDF and CINDA) g) Development of software systems (GSYS) h) Customer services

  7. Photosynthetic Reaction Centres-from Basic Research to Application

    Directory of Open Access Journals (Sweden)

    László NAGY

    2010-06-01

    Full Text Available There is no doubt that studying the photosynthetic conversion of light into chemical energy is extremely important in many points of view; e.g., 1 technical-in order to improve the utilization of the solar energy; 2 food production-to improve the photosynthetic production of plants in agriculture; 3 ecology-keeping the primer production in ecosystems in the biosphere balanced, etc. In the photosynthetic reaction centre protein, RC, light energy is converted by a quantum yield of almost unity. There is no such a system designed by human which is able to do that. The RC purified from purple bacteria provides an extremely unique system for studying the requirements for high efficiency conversion of light into electrochemical energy. Thanks to the recent structural (e.g. crystallography (Nobel prize to Michel, Deisenhofer, Huber and functional (Nobel prize to Marcus results together with the works of molecular biology, computer- and electro-techniques, a wealth of information made a relatively clear picture about the kinetics, energetics and stabilization of electron transport within this protein that opens possibilities for new generation practical applications. In this paper we provide a short summary of fields in which the reaction centre protein can be important from practical points of view.

  8. Report on the IAEA Technical Meeting of the International Network of Nuclear Reaction Data Centres

    International Nuclear Information System (INIS)

    Forrest, R.; Dunaeva, S.; Otsuka, N.

    2010-07-01

    This report summarizes the IAEA Technical Meeting of the International Network of Nuclear Reaction Data Centres (biennial Data Centre Heads Meeting), held at the Japan Nuclear Reaction Data Centre, Hokkaido University, Sapporo, Japan, from 20 - 23 April 2010. The meeting was attended by 27 participants from 12 cooperating data centres of seven Member States and two International Organizations. The report contains a summary of the meeting, the conclusions and actions, the lists of working papers and presentations presented at the meeting. This report summarizes the IAEA Technical Meeting of the International Network of Nuclear Reaction Data Centres (biennial Data Centre Heads Meeting), held at the Japan Nuclear Reaction Data Centre, Hokkaido University, Sapporo, Japan, from 20 - 23 April 2010. The meeting was attended by 27 participants from 12 cooperating data centres of seven Member States and two International Organizations. The report contains a summary of the meeting, the conclusions and actions, the lists of working papers and presentations presented at the meeting. (author)

  9. Summary report on [IAEA] technical meeting of the International Network of Nuclear Reaction Data Centres

    International Nuclear Information System (INIS)

    Dunaeva, S.; Otsuka, N.; Schwerer, O.

    2009-08-01

    An IAEA Technical Meeting of the International Network of Nuclear Reaction Data Centres was held at the IAEA Headquarters in Vienna from 25 to 26 May 2009. The meeting was attended by 23 participants from 13 cooperating data centres. A summary of the meeting is given in this report, along with the conclusions, actions, and status report of the participating data centres. (author)

  10. Report on the IAEA technical meeting on network of nuclear reaction data centres

    Energy Technology Data Exchange (ETDEWEB)

    Schwerer, O [IAEA Nuclear Data Section, Vienna (Austria)

    2006-12-15

    An IAEA Technical Meeting on the Network of Nuclear Reaction Data Centres (biennial Data Centre Heads Meeting) was held at IAEA Headquarters, Vienna, Austria, from 25 to 28 September 2006. The meeting was attended by 19 participants from 10 cooperating data centres of six Member States and two international organizations. A summary of the meeting is given in this report, along with the conclusions, actions, and status reports of the participating data centres. (author)

  11. Report on the IAEA technical meeting on network of nuclear reaction data centres

    International Nuclear Information System (INIS)

    Pronyaev, V.G.; Schwerer, O.; Nichols, A.L.

    2002-08-01

    An IAEA Technical Meeting on the Network of Nuclear Reaction Data Centres (and the biennial Data Centre Heads' Meeting) was held at the OECD Nuclear Energy Agency, Issy-les-Moulineaux (near Paris), France, from 27 to 30 May 2002. The meeting was attended by 21 participants from 12 co-operating data centres of six Member States and two international organizations. This report contains the meeting summary, conclusions and actions, status reports of the participating data centres, and working papers considered. (author)

  12. Report on the IAEA technical meeting on network of nuclear reaction data centres

    International Nuclear Information System (INIS)

    Schwerer, O.

    2006-12-01

    An IAEA Technical Meeting on the Network of Nuclear Reaction Data Centres (biennial Data Centre Heads Meeting) was held at IAEA Headquarters, Vienna, Austria, from 25 to 28 September 2006. The meeting was attended by 19 participants from 10 cooperating data centres of six Member States and two international organizations. A summary of the meeting is given in this report, along with the conclusions, actions, and status reports of the participating data centres. (author)

  13. Compilation status and research topics in Hokkaido University Nuclear Reaction Data Centre

    International Nuclear Information System (INIS)

    Aikawa, M.; Furutachi, N.; Katō, K.; Ebata, S.; Ichinkhorloo, D.; Imai, S.; Sarsembayeva, A.; Zhou, B.; Otuka, N.

    2015-01-01

    Nuclear reaction data are necessary and applicable for many application fields. The nuclear reaction data must be compiled into a database for convenient availability. One such database is the EXFOR database maintained by the International Network of Nuclear Reaction Data Centres (NRDC). As a member of the NRDC, the Hokkaido University Nuclear Reaction Data Centre (JCPRG) compiles charged-particle induced reaction data and contributes about 10 percent of the EXFOR database. In this paper, we show the recent compilation status and related research topics of JCPRG. (author)

  14. Force-induced chemical reactions on the metal centre in a single metalloprotein molecule

    Science.gov (United States)

    Zheng, Peng; Arantes, Guilherme M.; Field, Martin J.; Li, Hongbin

    2015-01-01

    Metalloproteins play indispensable roles in biology owing to the versatile chemical reactivity of metal centres. However, studying their reactivity in many metalloproteins is challenging, as protein three-dimensional structure encloses labile metal centres, thus limiting their access to reactants and impeding direct measurements. Here we demonstrate the use of single-molecule atomic force microscopy to induce partial unfolding to expose metal centres in metalloproteins to aqueous solution, thus allowing for studying their chemical reactivity in aqueous solution for the first time. As a proof-of-principle, we demonstrate two chemical reactions for the FeS4 centre in rubredoxin: electrophilic protonation and nucleophilic ligand substitution. Our results show that protonation and ligand substitution result in mechanical destabilization of the FeS4 centre. Quantum chemical calculations corroborated experimental results and revealed detailed reaction mechanisms. We anticipate that this novel approach will provide insights into chemical reactivity of metal centres in metalloproteins under biologically more relevant conditions. PMID:26108369

  15. In vitro degradation of the 32kDa PS II reaction centre protein

    International Nuclear Information System (INIS)

    Eckenswiller, L.C.; Greenberg, B.M.

    1989-01-01

    The 32kDa thylakoid membrane protein is an integral component of the PS II reaction centre. The protein, although stable in the dark, undergoes light dependent turnover. Light from the UV, visible and far-red spectral regions induce 32kDa protein degradation. To better understand 32kDa protein metabolism, an in vitro degradation system is being developed. It consists of isolated thylakoid membranes than contain radiolabelled protein. The 32kDa protein is actively and specifically degraded when the thylakoid preparation is exposed to UV or visible radiation. The protein is stable in the dark. The herbicides (atrazine and DCMU) inhibit degradation in the in vitro system as they do in vivo. Additionally, several methods of isolating thylakoids are being compared to optimize the 32kDa protein degradation reaction. The preparations will be evaluated based on their ability to permit light dependent degradation of the 32kDa protein without affecting the other membrane components

  16. Report on the IAEA technical meeting of the International Network of Nuclear Reaction Data Centres

    Energy Technology Data Exchange (ETDEWEB)

    Schwerer, O; Dunaeva, S [International Atomic Energy Agency, Nuclear Data Section, Vienna (Austria); org, S Dunaeva@iaea [eds.

    2007-11-15

    An IAEA Technical Meeting of the International Network of Nuclear Reaction Data Centres was held at IAEA Headquarters, Vienna, Austria, from 8 to 10 October 2007. The meeting was attended by 19 participants from 11 cooperating data centres of six Member States and two international organizations. A summary of the meeting is given in this report, along with the conclusions, actions, and status reports of the participating data centres. (author)

  17. Report on the IAEA technical meeting on the network of nuclear reaction data centres

    Energy Technology Data Exchange (ETDEWEB)

    Schwerer, O [International Atomic Energy Agency, Nuclear Data Section, Vienna (Austria)

    2006-02-15

    Results of the IAEA Technical meeting on the Network of Nuclear Reaction Data Centres held at the IAEA Headquarters, Vienna, Austria, 12 to 14 October 2005, are summarized in this report. The meeting was attended by 16 participants from 11 co-operating data centres of six Member States and two International Organizations. The report contains a summary of the meeting, the conclusions and actions, and status reports of the participating data centres. (author)

  18. Report on the IAEA technical meeting on the network of nuclear reaction data centres

    International Nuclear Information System (INIS)

    Schwerer, O.

    2006-02-01

    Results of the IAEA Technical meeting on the Network of Nuclear Reaction Data Centres held at the IAEA Headquarters, Vienna, Austria, 12 to 14 October 2005, are summarized in this report. The meeting was attended by 16 participants from 11 co-operating data centres of six Member States and two International Organizations. The report contains a summary of the meeting, the conclusions and actions, and status reports of the participating data centres. (author)

  19. Report on the IAEA technical meeting of the International Network of Nuclear Reaction Data Centres

    International Nuclear Information System (INIS)

    Schwerer, O.; Dunaeva, S.; S.Dunaeva@iaea.org

    2007-11-01

    An IAEA Technical Meeting of the International Network of Nuclear Reaction Data Centres was held at IAEA Headquarters, Vienna, Austria, from 8 to 10 October 2007. The meeting was attended by 19 participants from 11 cooperating data centres of six Member States and two international organizations. A summary of the meeting is given in this report, along with the conclusions, actions, and status reports of the participating data centres. (author)

  20. Report on the IAEA advisory group meeting on network of nuclear reaction data centres

    Energy Technology Data Exchange (ETDEWEB)

    Pronyaev, V G; Schwerer, O [International Atomic Energy Agency, Nuclear Data Section, Vienna (Austria)

    2000-08-01

    This report summarizes the IAEA Advisory Group Meeting (AGM) on Network of Nuclear Reaction Data Centres, hold at the Institute of Physics and Power Engineering, Obninsk, Russia, 15 to 19 May 2000. The meeting was attended by 28 participants from 13 co-operating data centres from seven Member States and two International Organizations. The report contains a meeting summary, the conclusions and actions, progress and status reports of the participating data centres and working papers considered at the meeting. (author)

  1. Report on the IAEA technical meeting on network of nuclear reaction data centres

    Energy Technology Data Exchange (ETDEWEB)

    Schwerer, O [International Atomic Energy Agency, Nuclear Data Section, Vienna (Austria); Henriksson, H [NEA Data Bank, Issy-les-Moulineaux (France)

    2005-01-15

    This report summarizes the IAEA Technical Meeting on the Network of Nuclear Reaction Data Centres (biennial Data Centre Heads Meeting), held at the Brookhaven National Laboratory, Upton, NY, USA from 4-7 October 2004. The meeting was attended by 20 participants from 11 co-operating data centres of six Member States and two International Organizations. The report contains a summary of the meeting, the conclusions and actions, status reports of the participating data centres, and a revised technical protocol for the cooperation of the network. (author)

  2. Report on the IAEA technical meeting on network of nuclear reaction data centres

    International Nuclear Information System (INIS)

    Schwerer, O.; Henriksson, H.

    2005-01-01

    This report summarizes the IAEA Technical Meeting on the Network of Nuclear Reaction Data Centres (biennial Data Centre Heads Meeting), held at the Brookhaven National Laboratory, Upton, NY, USA from 4-7 October 2004. The meeting was attended by 20 participants from 11 co-operating data centres of six Member States and two International Organizations. The report contains a summary of the meeting, the conclusions and actions, status reports of the participating data centres, and a revised technical protocol for the cooperation of the network. (author)

  3. Summary Report of the Technical Meeting on International Network of Nuclear Reaction Data Centres

    International Nuclear Information System (INIS)

    Otsuka, Naohiko

    2012-06-01

    This report summarizes the IAEA Technical Meeting on the International Network of Nuclear Reaction Data Centres, held at the OECD Nuclear Energy Agency (NEA) in Issy-les-Moulineaux, France from 16 to 19 April 2012. The meeting was attended by twenty-three participants representing thirteen cooperative centres from eight Member States and two International Organisations. A summary of the meeting is given in this report along with the conclusions and actions. (author)

  4. Summary Report on IAEA Technical Meeting on the International Network of Nuclear Reaction Data Centres

    International Nuclear Information System (INIS)

    Otsuka, Naohiko

    2011-07-01

    This report summarizes the IAEA Technical Meeting of the International Network of Nuclear Reaction Data Centres, held at the IAEA Headquarters in Vienna, Austria from 23 - 24 May 2011. The meeting was attended by 25 participants from 13 cooperating data centres of nine Member States and two International Organizations. The report contains a summary of the meeting, the conclusions and actions, the lists of working papers and presentations presented at the meeting. (author)

  5. Summary Report of the Technical Meeting on International Network of Nuclear Reaction Data Centres

    International Nuclear Information System (INIS)

    Otsuka, Naohiko

    2013-07-01

    This report summarizes the IAEA Technical Meeting on the International Network of Nuclear Reaction Data Centres, held at the IAEA Headquarters in Vienna, Austria from 23 to 25 April 2013. The meeting was attended by 24 participants representing 13 cooperative centres from 8 Member States and 2 International Organisations. A summary of the meeting is given in this report along with the conclusions and actions. (author)

  6. Reaction kinetics for preparation of silica film with Stoeber method

    International Nuclear Information System (INIS)

    Shang Mengying; Jiang Xiaodong; Liu Miao; Luo Xuan; Tang Yongjian; Cao Linhong

    2013-01-01

    A new formula was proposed to investigate the relationship between reaction time and tetraethylorthosilicate (TEOS) conversion rate for preparation of silica sol with Stöber method, by studying the reaction kinetics of TEOS hydrolytic process. An appropriate conversion rate was then determined and used to calculate the theoretical optimal reaction time. Meanwhile, silica sols were prepared by sol-gel process using TEOS as precursor and ammonia as catalyst. It was found that the reaction time decreases with an increasing amount of ammonia and water. The values of experimental optimal reaction time were obtained, and agree with the theoretical results (the errors are within 5%), which shows good applicability of our formula. (authors)

  7. MSU SINP CDFE nuclear data activities in the nuclear reaction data centres network

    International Nuclear Information System (INIS)

    Boboshin, I.N.; Varlamov, V.V.; Komarov, S.Yu.; Peskov, N.N.; Semin, S.B.; Stepanov, M.E.; Chesnokov, V.V.

    2002-01-01

    This paper is the progress report of the Centre for Photonuclear Experiments Data, Moscow. It is a short review of the works carried out by the CDFE concerning the IAEA nuclear reaction data centers network activities from May 2001 until May 2002. and the description of the main results obtained. (a.n.)

  8. Preparation of natural isovaleraldehyde by the Maillard reaction

    Institute of Scientific and Technical Information of China (English)

    Hong Yu Tian; Jie Zhang; Bao Guo Sun; Ming Quan Huang; Jian Rong Li; Xiao Xiang Han

    2007-01-01

    Isovaleraldehyde possesses malty, fruity, cocoa-like odor and is widely used in fruit, chocolate, coffee flavors. The preparation of natural isovaleraldehyde by the Maillard model reaction was studied in this paper. The effects of the ratio of D-glucose/L-leucine,reaction temperature and pH value on the yield of isovaleraldehyde were explored. The optimum conditions were as follows:n(D-glucose):n(L-leucine) = 4, temperature 150 ℃, reaction time 3 h, pH 5. The highest yield of isovaleraldehyde obtained was about 32%.

  9. Summary Report of the Technical Meeting on International Network of Nuclear Reaction Data Centres

    International Nuclear Information System (INIS)

    Otuka, Naohiko; Herman, Michal

    2016-07-01

    This report summarizes the IAEA Technical Meeting on the International Network of Nuclear Reaction Data Centres held at the China Hall of Science and Technology in Beijing, China from 7 to 10 June 2016. The meeting was attended by 23 participants representing 13 cooperative Centres from 8 Member States (China, Hungary, India, Japan, Korea, Russia, Ukraine and USA) and 2 International Organisations (NEA, IAEA) as well as two participants from Kazakhstan. A summary of the meeting is given in this report along with the conclusions and actions. (author)

  10. Status report of AMS sample preparation laboratory at GADAM Centre, Gliwice, Poland

    Energy Technology Data Exchange (ETDEWEB)

    Piotrowska, N., E-mail: natalia.piotrowska@polsl.pl [GADAM Centre of Excellence, Department of Radioisotopes, Institute of Physics, Silesian University of Technology, Gliwice (Poland)

    2013-01-15

    The laboratory for {sup 14}C AMS sample preparation in the Gliwice Radiocarbon Laboratory has gradually evolved since its start in 1999 to cater for an increase in volume and variety of radiocarbon dating samples. To date, nearly 2000 graphite targets have been produced from materials such as plant macrofossils, charcoal, peat, bones, shells and wood. The equipment comprises a station for chemical preparation and high vacuum lines for production, purification and graphitization of sample carbon dioxide. The present capacity allows preparation of up to 400 targets annually for the needs of scientific projects and external orders for radiocarbon dating continuously received by the GADAM Centre of Excellence. The laboratory's sample preparation protocols and recent improvements are described and its performance during the 10 years of activity is discussed in terms of parameters obtained from reference materials prepared in this laboratory and demonstrated with a few science applications.

  11. EGNOS Monitoring Prepared in Space Research Centre P.A.S. for SPMS Project

    Science.gov (United States)

    Swiatek, Anna; Jaworski, Leszek; Tomasik, Lukasz

    2017-12-01

    The European Geostationary Overlay Service (EGNOS) augments Global Positioning System (GPS) by providing correction data and integrity information for improving positioning over Europe. EGNOS Service Performance Monitoring Support (SPMS) project has assumed establishment, maintenance and implementation of an EGNOS performance monitoring network. The paper presents preliminary results of analyses prepared in Space Research Centre, Polish Academy of Sciences (Warsaw), as one of partners in SPMS project.

  12. Report on the consultants' meeting on co-ordination of the nuclear reaction data centres. (Technical aspects)

    International Nuclear Information System (INIS)

    Schwerer, O.; Lammer, M.; Pronyaev, V.G.

    1999-08-01

    This report summarizes the 1999 Co-ordination Meeting on Technical Aspects of the Co-operation of the Nuclear Reaction Data Centres, hold at the IAEA Headquarters in Vienna, Austria, 18 to 20 May 1999. The meeting was attended by scientists from 11 Nuclear Data Centres from 7 Member States and 2 International Organizations. The present document contains a meeting summary, the conclusions and actions, and progress reports of the Participating Data Centres. (author)

  13. Report on the IAEA consultants' meeting on the co-ordination of nuclear reaction data centres (technical aspects)

    Energy Technology Data Exchange (ETDEWEB)

    Schwerer, O [International Atomic Energy Agency, Nuclear Data Section, Vienna (Austria)

    2001-07-01

    This report summarizes the results of the IAEA Consultants' Meeting on the Co-ordination of Nuclear Reaction Data Centres (Technical Aspects), held at the IAEA Headquarters, Vienna, Austria, 28 to 30 May 2001. The meeting was attended by 16 participants from 10 co-operating data centres from six Member States and two International Organizations. The report contains a meeting summary, the conclusions and actions, progress and status reports of the participating data centres and working papers considered at the meeting. (author)

  14. Association of manual or engine-driven glide path preparation with canal centring and apical transportation: a systematic review.

    Science.gov (United States)

    Hartmann, R C; Peters, O A; de Figueiredo, J A P; Rossi-Fedele, G

    2018-04-28

    The role and effect of glide path preparation in root canal treatment remain controversial. This systematic review aims to compare apical transportation and canal centring of different glide path preparation techniques, with or without subsequent engine-driven root canal preparation. A database search in PubMed, PubMed Central, Embase, Scopus, EBSCO Dentistry & Oral Sciences Source and Virtual Health Library was conducted, using appropriate key words to identify the effect of glide path preparation (or its absence) on apical transportation and canal centring. An assessment for the risk of bias in included studies was carried out. Amongst 2146 studies, 18 satisfied the inclusion criteria. Nine studies assessed glide path preparation per se, comparing apical transportation and canal centring of rotary systems and/or manual files; eleven further investigations examined the efficacy of the glide path prior to final canal preparation with different engine-driven systems. Risk of bias and other study design features with potential influence on study outcomes and clinical implications were assessed. Based on the available evidence, and within the limitation of the studies included, preparation of a glide path using rotary sequences performs similarly (in most of the component studies) or significantly better than manual preparation when assessing apical transportation or canal centring. When compared to the absence of a glide path, canal shaping following glide path preparation was of similar, or significantly better quality, in regard to apical transportation or canal centring. © 2018 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  15. Report on the IAEA technical meeting on co-ordination of the network of nuclear reaction data centres

    International Nuclear Information System (INIS)

    Schwerer, O.

    2003-08-01

    Results of the IAEA Technical Meeting on the Co-ordination of the Network of Nuclear Reaction Data Centres held at the IAEA Headquarters, Vienna, Austria, 17 to 19 June 2003, are summarised in this report. The meeting was attended by 14 participants from 9 cooperating data centres of five member states and two International Organizations. A meeting summary, the conclusions and actions, progress and status reports of the participating data centres, and working papers considered at the meeting, are given in the relevant sections. (author)

  16. Social marketing ethics: report prepared for the National Social Marketing Centre

    OpenAIRE

    Eagle, L.; National Social Marketing Centre

    2009-01-01

    This report has been developed by Professor Lynn Eagle from the Bristol Social Marketing Centre, Bristol Business School University of West of England with contributions from\\ud staff at the National Social Marketing Centre.

  17. Towards preparative peroxygenase-catalyzed oxyfunctionalization reactions in organic media

    NARCIS (Netherlands)

    Fernandez Fueyo, E.; Ni, Y.; Gomez Baraibar, A.; Alcalde, Miguel; van Langen, L.M.; Hollmann, F.

    2016-01-01

    The peroxygenase from Agrocybe aegerita (AaeUPO) has been evaluated for stereoselective oxyfunctionalization chemistry under non-aqueous reaction conditions. The stereoselective hydroxylation of ethylbenzene to (R)-1-phenylethanol was performed in neat substrate as reaction medium together with

  18. Enriched reaction center preparation from green photosynthetic bacteria. [Chlorobium limicola

    Energy Technology Data Exchange (ETDEWEB)

    Olson, J M; Giddings, Jr, T H; Shaw, E K

    1976-01-01

    Bacteriochlorophyll a reaction-center complex I from Chlorobium limicola f. thiosulfatophilum 6230 (Tassajara) was incubated in 2 M guanidine . HCl and then chromatographed on cross-linked dextran or agarose gel. Two principal components were separated: a larger component with photochemical activity (bacteriochlorophyll a reaction-center complex II) and a smaller component without activity (bacteriochlorophyll a protein). Complex II contains carotenoid, bacteriochlorophyll a, reaction center(s), and cytochromes b and c, but lacks the well characterized bacteriochlorophyll a protein contained in Complex I. Complex II carries out a light-induced reduction of cytochrome b along with an oxidation of cytochrome c.

  19. Preparation of different amides via Ritter reaction from alcohols and ...

    Indian Academy of Sciences (India)

    Abstract. A number of methods have been proposed for the modification of the Ritter reaction. However, ... alcohols or alkenes in the presence of sulphuric acid is named Ritter ..... The results obtained from SBNPSA catalyst was compared with ...

  20. Adverse drug reactions monitoring of psychotropic drugs: a tertiary care centre study

    Directory of Open Access Journals (Sweden)

    Hemendra Singh

    2017-06-01

    Full Text Available Background: Many new psychotropic drugs/ agents have been developed and found to be effective in the treatment of psychiatric disorders. However, these drugs also exhibit adverse drug reactions (ADRs which may affect compliance in psychiatric patients. Hence the present study was aimed at monitoring and assessing ADRs caused by psychotropic drugs. Methods: A hospital based prospective observational study was carried out in the psychiatry outpatient department of a tertiary care teaching hospital for the duration of six months. Two hundred and two patients were included in the study and ADRs were documented using a predesigned data collection form. The causality assessment was carried out as per the criteria of both the World Health Organization- Uppsala Monitoring Centre (WHO-UMC and Naranjo scale. Severity and predictability assessment of ADRs were also performed. Results: A total of 106 ADRs were observed during the study period with majority of them occurring in 25-35 years of age group (40.56%. Weight gain (18.86% followed by sedation (16.03% and insomnia (11.32% were found to be the commonest ADRs. Risperidone (19.8% and escitalopram (12.3% were the drugs responsible for majority of the ADRs. Causality assessment showed that most of ADRs were possible and probable. 94.33% of ADRs were found to be mild and 89% of them were predictable. Conclusion: A wide range of ADRs affecting central nervous and metabolic systems were reported with psychotropic drugs. The study findings necessitate the need for an active pharmacovigilance programme for the safe and effective use of psychotropics.

  1. Using biharmonic laser pumping for preparation of pure and entangled multiexciton states in clusters of resonantly interacting fluorescent centres

    International Nuclear Information System (INIS)

    Basieva, I.T.; Basiev, T.T.; Dietler, G.; Pukhov, K.K.; Sekatskii, S.K.

    2007-01-01

    Use of a biharmonic laser pumping for preparation of pure and entangled multiexciton states in dimers and tetramers of resonantly interacting fluorescent particles is analysed. Special emphasis is given to the preparation of all possible pure exciton states and their maximally entangled Bell states. The general results are illustrated using as an example the pair and quartet centres of neodymium ions in calcium fluoride (M- and N-centres), where all necessary experimental information concerning the interactions and decoherence is available, and experimental preparation of Bell vacuum-single exciton and vacuum-biexciton states has been recently demonstrated. These results can be easily rescaled for the cases of quantum dots and dye molecules. Numerical results are compared with the analytical results obtained for a particular case of the biharmonic excitation of dimers. Excellent agreement between these approaches is demonstrated

  2. Risk Evaluation of Endoscopic Retrograde Cholangiopancreatography-Related Contrast Media Allergic-Like Reaction: A Single Centre Experience

    Directory of Open Access Journals (Sweden)

    Félix Trottier-Tellier

    2018-01-01

    Full Text Available Background and Aims. Few cases of endoscopic retrograde cholangiopancreatography- (ERCP- related contrast media (CM adverse reactions have been reported in the current literature. There is a lack of standardisation in practice regarding premedication prophylaxis for at-risk patients undergoing ERCP and there are few data to guide the practitioners. Our goal is to evaluate the risk of CM adverse reaction in a group of patients with a past history of allergic-like reaction to iodine product undergoing ERCP. Methods. A retrospective chart review study was performed of patients who underwent ERCP at our single centre from January 2010 to December 2015. Results. 2295 ERCPs were performed among 1766 patients. No anaphylactoid or severe adverse reaction occurred. One (0.04% ERCP-related CM benign reaction was reported in a patient known for penicillin allergy. Among 127 ERCPs performed on patients with a prior adverse reaction to iodine, 121 procedures were done without and 6 with a premedication prophylaxis. In both groups, no ERCP-related CM reaction occurred. Conclusions. To our knowledge, we report the largest cohort of iodine allergic patients undergoing ERCP ever published. These results suggest that ERCP-related CM adverse reactions are very rare even among patients at risk for CM reaction.

  3. Reaction of hypochlorite with amino acids and peptides : EPR evidence for rapid rearrangement and fragmentation of nitrogen-centred radicals

    International Nuclear Information System (INIS)

    Hawkins, C.L.; Davies, M.J.

    1998-01-01

    Various amino acid side chains have been shown to be particularly susceptible to attack and modification by hypochlorite (HOCl). It is known that tyrosine is readily chlorinated by HOCl to give 3-chlorotyrosine and this product has been employed as a marker of HOCl-mediated damage to proteins. Cysteine and methionine react rapidly with HOCl to give oxy acids and cystine (from cysteine) and sulphoxides (from methionine). Lysine and amino acids which lack the above functional groups also react with HOCl via the free amino group which results in the generation of unstable chloramine intermediates; subsequent decomposition of these species gives NH 3 , CO 2 and aldehydes. While the products of reaction of HOCl with amino acids and peptides are reasonably well characterised, the mechanism(s) by which these products arise is less well understood. Electron paramagnetic resonance (EPR) spectroscopy with spin trapping and UV/visible spectroscopy has been employed to examine the reaction of HOCl with amino acids and some small peptides. Reaction of HOCl with N-acetyl amino acids or small peptides gives radicals predominantly at α-carbon sites via reaction at N-terminal free amino groups or amide (peptide) bonds. It is proposed that these carbon-centred radicals are produced as a result of the rearrangement of initial nitrogen-centred radicals formed on cleavage of the N-CI bond of the chloramine/chloramide species by a 1,2-shift reaction

  4. Resonance Raman spectroscopy of 2H-labelled spheroidenes in petroleum ether and in the Rhodobacter sphaeroides reaction centre.

    Science.gov (United States)

    Kok, P; Köhler, J; Groenen, E J; Gebhard, R; van der Hoef, I; Lugtenburg, J; Farhoosh, R; Frank, H A

    1997-03-01

    As a step towards the structural analysis of the carotenoid spheroidene in the Rhodobacter sphaeroides reaction centre, we present the resonance Raman spectra of 14-2H, 15-2H, 15'-2H, 14'-2H, 14,15'-2H2 and 15-15'-2H2 spheroidenes in petroleum ether and, except for 14,15'-2H2 spheroidene, in the Rb. sphaeroides R26 reaction center (RC). Analysis of the spectral changes upon isotopic substitution allows a qualitative assignment of most of the vibrational bands to be made. For the all-trans spheroidenes in solution the resonance enhancement of the Raman bands is determined by the participation of carbon carbon stretching modes in the centre of the conjugated chain, the C9 to C15' region. For the RC-bound 15,15'-cis spheroidenes, enhancement is determined by the participation of carbon-carbon stretching modes in the centre of the molecule, the C13 to C13' region. Comparison of the spectra in solution and in the RC reveals evidence for an out-of-plane distortion of the RC-bound spheroidene in the central C14 to C14' region of the carotenoid. The characteristic 1240 cm-1 band in the spectrum of the RC-bound spheroidene has been assigned to a normal mode that contains the coupled C12-C13 and C13'-C12' stretch vibrations.

  5. Literature information applicable to the reaction of uranium oxides with chlorine to prepare uranium tetrachloride

    Energy Technology Data Exchange (ETDEWEB)

    Haas, P.A.

    1992-02-01

    The reaction of uranium oxides and chlorine to prepare anhydrous uranium tetrachloride (UCl{sub 4}) are important to more economical preparation of uranium metal. The most practical reactions require carbon or carbon monoxide (CO) to give CO or carbon dioxide (CO{sub 2}) as waste gases. The chemistry of U-O-Cl compounds is very complex with valances of 3, 4, 5, and 6 and with stable oxychlorides. Literature was reviewed to collect thermochemical data, phase equilibrium information, and results of experimental studies. Calculations using thermodynamic data can identify the probable reactions, but the results are uncertain. All the U-O-Cl compounds have large free energies of formation and the calculations give uncertain small differences of large numbers. The phase diagram for UCl{sub 4}-UO{sub 2} shows a reaction to form uranium oxychloride (UOCl{sub 2}) that has a good solubility in molten UCl{sub 4}. This appears more favorable to good rates of reaction than reaction of solids and gases. There is limited information on U-O-Cl salt properties. Information on the preparation of titanium, zirconium, silicon, and thorium tetrachlorides (TiCl{sub 4}, ZrCl{sub 4}, SiCl{sub 4}, ThCl{sub 4}) by reaction of oxides with chlorine (Cl{sub 2}) and carbon has application to the preparation of UCl{sub 4}.

  6. Literature information applicable to the reaction of uranium oxides with chlorine to prepare uranium tetrachloride

    International Nuclear Information System (INIS)

    Haas, P.A.

    1992-02-01

    The reaction of uranium oxides and chlorine to prepare anhydrous uranium tetrachloride (UCl 4 ) are important to more economical preparation of uranium metal. The most practical reactions require carbon or carbon monoxide (CO) to give CO or carbon dioxide (CO 2 ) as waste gases. The chemistry of U-O-Cl compounds is very complex with valances of 3, 4, 5, and 6 and with stable oxychlorides. Literature was reviewed to collect thermochemical data, phase equilibrium information, and results of experimental studies. Calculations using thermodynamic data can identify the probable reactions, but the results are uncertain. All the U-O-Cl compounds have large free energies of formation and the calculations give uncertain small differences of large numbers. The phase diagram for UCl 4 -UO 2 shows a reaction to form uranium oxychloride (UOCl 2 ) that has a good solubility in molten UCl 4 . This appears more favorable to good rates of reaction than reaction of solids and gases. There is limited information on U-O-Cl salt properties. Information on the preparation of titanium, zirconium, silicon, and thorium tetrachlorides (TiCl 4 , ZrCl 4 , SiCl 4 , ThCl 4 ) by reaction of oxides with chlorine (Cl 2 ) and carbon has application to the preparation of UCl 4

  7. Nuclear Reaction Data File for Astrophysics (NRDF/A) in Hokkaido University Nuclear Reaction Data Center

    International Nuclear Information System (INIS)

    Kato, Kiyoshi; Kimura, Masaaki; Furutachi, Naoya; Makinaga, Ayano; Togashi, Tomoaki; Otuka, Naohiko

    2010-01-01

    The activities of the Japan Nuclear Reaction Data Centre is explained. The main task of the centre is data compilation of Japanese nuclear reaction data in collaboration of the International Network of Nuclear Reaction Data Centres. As one of recent activities, preparation of a new database (NRDF/A) and evaluation of astronuclear reaction data are reported. Collaboration in the nuclear data activities among Asian countries is proposed.

  8. Report on the 9. IAEA consultants' meeting of the nuclear reaction data centres

    International Nuclear Information System (INIS)

    Lemmel, H.D.

    1988-04-01

    This report summarizes the 1987 co-ordination meeting of the national and regional nuclear reaction data centers, convened by the IAEA at regular intervals. The main topics are: the international exchange of nuclear reaction data by means of the ''EXFOR'' system, and the further development of this system; the ''CINDA'' system as an international index and bibliography to neutron reaction data; the sharing of the workload for speedy and reliable data compilation; the exchange and documentation of evaluated data libraries in ENDF format, with the goal of rendering data center services to data users in IAEA Member States by means of computer retrievals and printed materials. (author). Refs, figs and tabs

  9. Some experiments on the primary electron acceptor in reaction centres from Rhodopseudomanas sphaeroides

    Energy Technology Data Exchange (ETDEWEB)

    Wraight, C A; Cogdell, R J; Clayton, R K

    1975-01-01

    The bacterial reaction center absorbance change at 450 nm (A-450), assigned to an anionic semiquinone, has been suggested as a candidate for the reduced form of the primary electron acceptor in bacterial photosynthesis. In reaction centers of Rhodopseudomonas sphaeroides we have found kinetic discrepancies between the decay of A-450 and the recovery of photochemical competence. In addition, no proton uptake is measurable on the first turnover, although subsequent ones elicit one proton bound per electron. These results are taken to indicate that the acceptor reaction after a long dark period may be different for the first turnover than for subsequent ones. It is suggested that A-450 is still a likely candidate for the acceptor function but that in reaction centers, additional quinone may act as an adventitious primary acceptor when the ''true'' primary acceptor is reduced. Alternatively, the primary acceptor may act in a ''ping-pong'' fashion with respect to subsequent photoelectrons.

  10. Preparation of molybdenum borides by combustion synthesis involving solid-phase displacement reactions

    International Nuclear Information System (INIS)

    Yeh, C.L.; Hsu, W.S.

    2008-01-01

    Preparation of molybdenum borides of five different phases in the Mo-B binary system (including Mo 2 B, MoB, MoB 2 , Mo 2 B 5 , and MoB 4 ) was performed by self-propagating high-temperature synthesis (SHS) with two kinds of the reactant samples. When elemental powder compacts with an exact stoichiometry corresponding to the boride phase were employed, self-sustaining reaction was only achieved in the sample with Mo:B = 1:1 and nearly single-phase MoB was yielded. Therefore, the other four boride compounds were prepared from the reactant compacts composed of MoO 3 , Mo, and B powders, within which the displacement reaction of MoO 3 with boron was involved in combustion synthesis. Experimental evidence shows that the extent of displacement reaction in the overall reaction has a significant impact on sustainability of the synthesis reaction, combustion temperature, reaction front velocity, and composition of the end product. An increase in the solid-phase displacement reaction taking place during the SHS process contributes more heat flux to the synthesis reaction, thus resulting in the increase of combustion temperature and enhancement of the reaction front velocity. Based upon the XRD analysis, formation of Mo 2 B, MoB 2 , and Mo 2 B 5 as the dominant boride phase in the end product was successful through the SHS reaction with powder compacts under appropriate stoichiometries between MoO 3 , Mo, and B. However, a poor conversion was observed in the synthesis of MoB 4 . The powder compact prepared for the production of MoB 4 yielded mostly Mo 2 B 5

  11. Electro catalyst of platinum prepared by CVD for the oxygen reduction reaction

    International Nuclear Information System (INIS)

    Garcia C, M.A.; Fernandez V, S.M.; Vargas G, J.R.

    2004-01-01

    In this work it is reported the preparation and characterization of platinum films obtained by the technique of chemical vapor deposition at low pressure, better well-known as LPCVD for their initials in English (Low Pressure Chemical Vapor Deposition). The technique has several industrial applications and in this work it is explored their possible use to prepare applicable electrocatalysts in fuel cells. The films were characterized by XRD, SEM, EDS and they were proven for to determine their acting in the Oxygen reduction reaction (Orr) in sulfuric acid 0.5 M, the results show that the material presents good activity for the reaction in study. (Author)

  12. A Field Study of Participant Reactions to a Developmental Assessment Centre: Testing an organisational justice model

    Directory of Open Access Journals (Sweden)

    Michael M Harris

    2008-06-01

    Full Text Available Although assessment centres are being increasingly employed for developmental purposes, there has been a dearth of research regarding them. We investigated an organisational justice theory model suggested by Cohen-Charash and Spector (2001 in this relatively novel context. The model included antecedents (e.g., perceived validity, organisational justice perceptions (i.e., distributive justice and procedural justice, and one outcome (i.e., feedback utility perceptions. Most of our hypotheses were supported, suggesting much evidence for this model. The predicted effect for perceived fakability was not supported. Contrary to our hypothesis, distributive justice perceptions were at least as important as procedural justice perceptions in predicting feedback utility perceptions. A direct test of the effect of context on organisational justice theory is recommended.

  13. Preparation and Reaction Chemistry of Novel Silicon-Substituted 1,3-Dienes

    Directory of Open Access Journals (Sweden)

    Partha P. Choudhury

    2015-09-01

    Full Text Available 2-Silicon-substituted 1,3-dienes containing non transferrable groups known to promote transmetallation were prepared by Grignard chemistry and enyne metathesis. These dienes participated in one pot metathesis/Diels-Alder reactions in regio- and diastereoselective fashions. Electron-rich alkenes showed the fastest rates in metathesis reactions, and ethylene, a commonly used metathesis promoter slowed enyne metathesis. 2-Pyridyldimethylsilyl and 2-thienyldimethylsilyl substituted Diels-Alder cycloadducts participated in cross-coupling chemistry and the 2-thienyldimethylsilyl substituted cycloadducts underwent cross-coupling under very mild reaction conditions.

  14. Microwave-assisted Maillard reactions for the preparation of advanced glycation end products (AGEs).

    Science.gov (United States)

    Visentin, Sonja; Medana, Claudio; Barge, Alessandro; Giancotti, Valeria; Cravotto, Giancarlo

    2010-05-21

    The application of microwaves as an efficient form of volumetric heating to promote organic reactions was recognized in the mid-1980 s. It has a much longer history in the food research and industry where microwave irradiation was studied in depth to optimize food browning and the development of desirable flavours from Maillard reactions. The microwave-promoted Maillard reaction is a challenging synthetic method to generate molecular diversity in a straightforward way. In this paper we present a new rapid and efficient one-pot procedure for the preparation of pentosidine and other AGEs under microwave irradiation.

  15. Research of Hydrogen Preparation with Catalytic Steam-Carbon Reaction Driven by Photo-Thermochemistry Process

    Directory of Open Access Journals (Sweden)

    Xiaoqing Zhang

    2013-01-01

    Full Text Available An experiment of hydrogen preparation from steam-carbon reaction catalyzed by K2CO3 was carried out at 700°C, which was driven by the solar reaction system simulated with Xenon lamp. It can be found that the rate of reaction with catalyst is 10 times more than that without catalyst. However, for the catalytic reaction, there is no obvious change for the rate of hydrogen generation with catalyst content range from 10% to 20%. Besides, the conversion efficiency of solar energy to chemical energy is more than 13.1% over that by photovoltaic-electrolysis route. An analysis to the mechanism of catalytic steam-carbon reaction with K2CO3 is given, and an explanation to the nonbalanced [H2]/[CO + 2CO2] is presented, which is a phenomenon usually observed in experiment.

  16. Loss of Functional Photosystem II Reaction Centres in Zooxanthellae of Corals Exposed to Bleaching Conditions: Using Fluorescence Rise Kinetics.

    Science.gov (United States)

    Hill, R; Larkum, A W D; Frankart, C; Kühl, M; Ralph, P J

    2004-01-01

    Mass coral bleaching is linked to elevated sea surface temperatures, 1-2 degrees C above average, during periods of intense light. These conditions induce the expulsion of zooxanthellae from the coral host in response to photosynthetic damage in the algal symbionts. The mechanism that triggers this release has not been clearly established and to further our knowledge of this process, fluorescence rise kinetics have been studied for the first time. Corals that were exposed to elevated temperature (33 degrees C) and light (280 mumol photons m(-2) s(-1)), showed distinct changes in the fast polyphasic induction of chlorophyll-a fluorescence, indicating biophysical changes in the photochemical processes. The fluorescence rise over the first 2000ms was monitored in three species of corals for up to 8 h, with a PEA fluorometer and an imaging-PAM. Pocillopora damicornis showed the least impact on photosynthetic apparatus, while Acropora nobilis was the most sensitive, with Cyphastrea serailia intermediate between the other two species. A. nobilis showed a remarkable capacity for recovery from bleaching conditions. For all three species, a steady decline in the slope of the initial rise and the height of the J-transient was observed, indicating the loss of functional Photosystem II (PS II) centres under elevated-temperature conditions. A significant loss of PS II centres was confirmed by a decline in photochemical quenching when exposed to bleaching stress. Non-photochemical quenching was identified as a significant mechanism for dissipating excess energy as heat under the bleaching conditions. Photophosphorylation could explain this decline in PS II activity. State transitions, a component of non-photochemical quenching, was a probable cause of the high non-photochemical quenching during bleaching and this mechanism is associated with the phosphorylation-induced dissociation of the light harvesting complexes from the PS II reaction centres. This reversible process may

  17. Mathematical model for the analytical signal of an herbicide sensor based on the reaction centre of Rhodobacter sphaeroides.

    Science.gov (United States)

    Andreu, Yolanda; Baldini, Francesco; Giannetti, Ambra; Mencaglia, Andrea

    2005-01-30

    This paper introduces a mathematical model which makes it possible both to determine the concentration of photosynthetic herbicides and to obtain a quantitative parameter in order to compare their activity using a previously described sensing system. The working principle involves the changes in absorption properties at 860nm of the reaction centre (RC) isolated from the bacteria Rhodobacter sphaeroides when photosynthetic herbicides are present. The method has been used for the determination and activity comparison of five photosynthetic herbicides: diuron, atrazine, terbutryn, terbuthylazine and simazine. Detection limits obtained were 2.2, 0.75, 0.046, 0.25, and 1.4muM, respectively. The resulting order for the different herbicides according to their action on RC was: terbutryn > terbuthylazine > atrazine > simazine > diuron.

  18. Expecting the unexpected [The IAEA's Incident and Emergency Centre helps prepare States to face radiological emergencies

    International Nuclear Information System (INIS)

    Stern, W.; Buglova, E.

    2007-01-01

    The IAEA works with its partners worldwide to promote safe, secure and peaceful nuclear technologies. The IAEA's Statute assigns functions to the Secretariat in relation to radiation emergencies, including fostering international cooperation in the area of emergency preparedness and response. The Convention on Early Notification of a Nuclear Accident and the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency (often called the 'Emergency Conventions') place specific legal obligations on the IAEA with regard to emergency preparedness and response. In 2005, the IAEA established a fully integrated Incident and Emergency Centre (IEC) which acts as the global focal point for international preparedness, communication and response to nuclear and radiological incidents or emergencies irrespective of their cause. In this role, the IEC stands at the centre of coordinating effective and efficient activities worldwide. While emergency response capabilities have existed within the IAEA since concluding the Emergency Conventions in the 1980s, the decision to create an integrated Centre within the IAEA became more pressing with the growing use of nuclear applications worldwide as well as increasing concern over malicious use of nuclear or radioactive materials. Today, the IEC provides around-the-clock assistance to States dealing with nuclear and radiological events. Under the Emergency Conventions, the IEC coordinates actions of global experts and efforts within the IAEA. It also helps coordinate the responses of States as well as other international organizations, such as the WHO (World Health Organization), FAO (Food and Agricultural Organization) or WMO (World Meteorological Organization) in case of a nuclear or radiological emergency. Response to incidents and emergencies can involve exchange of information, provision of advice and/or coordination of field response. The IEC ensures that the IAEA's incident and emergency arrangements are fully

  19. Preparing the key metabolite of Z-ligustilide in vivo by a specific electrochemical reaction.

    Science.gov (United States)

    Duan, Feipeng; Xu, Wenjuan; Liu, Jie; Jia, Zhixin; Chen, Kuikui; Chen, Yijun; Wang, Mingxia; Ma, Kaiyue; Dong, Jiaojiao; Chen, Lianming; Xiao, Hongbin

    2018-04-16

    The key in vivo metabolites of a drug play an important role in its efficacy and toxicity. However, due to the low content and instability of these metabolites, they are hard to obtain through in vivo methods. Electrochemical reactions can be an efficient alternative to biotransformation in vivo for the preparation of metabolites. Accordingly, in this study, the metabolism of Z-ligustilide was investigated in vitro by electrochemistry coupled online to mass spectrometry. This work showed that five oxidation products of the electrochemical reaction were detected and that two of the oxidation products (senkyunolide I and senkyunolide H) were identified from liver microsomal incubation as well. Furthermore, after intragastric administration of Z-ligustilide in rats, senkyunolide I and senkyunolide H were detected in the rat plasma and liver, while 6,7-epoxyligustilide, a key intermediate metabolite of Z-ligustilide, was difficult to detect in vivo. By contrast, 6,7-epoxyligustilide was obtained from the electrochemical reaction. In addition, for the first time, 6 mg of 6,7-epoxyligustilide was prepared from 120 mg of Z-ligustilide. Therefore, electrochemical reactions represent an efficient laboratory method for preparing key drug metabolites. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. The preparation and intramolecular radical cyclisation reactions of chiral oxyme ethers

    International Nuclear Information System (INIS)

    Booth, Susan E.; Jenkins, Paul R.

    1998-01-01

    Chiral oxime ether 2 and Oxime ester 4 have been prepared by alkylation and esterification of the oxime 1. Racemic hydroxylamine 6 and chiral hydroxylamine 10 have been synthesised from N-hydroxysuccinimide and the corresponding alcohol in the presence of diethyl azo dicarboxylate, the two product were converted into the oxime ethers 7 and 11 respectively. The intramolecular radical cyclisation reactions of these oxime ethers and esters has been studied, successful reaction was observed to produce alkyl hydroxylamines 3,8 and 12. (author)

  1. The Preparation and Intramolecular Radical Cyclisation Reactions of Chiral Oxime Ethers

    Directory of Open Access Journals (Sweden)

    Booth Susan E.

    1998-01-01

    Full Text Available Chiral oxime ether 2 and Oxime ester 4 have been prepared by alkylation and esterification of the oxime 1. Racemic hydroxylamine 6 and chiral hydroxylamine 10 have been synthesised from N-hydroxysuccinimide and the corresponding alcohol in the presence of diethylazodicarboxylate, the two products were converted into the oxime ethers 7 and 11 respectively. The intramolecular radical cyclisation reactions of these oxime ethers and esters has been studied, successful reaction was observed to produce alkyl hydroxylamines 3, 8 and 12.

  2. Determination of ethamsylate in pharmaceutical preparations based on an auto-oxidation chemiluminescence reaction.

    Science.gov (United States)

    Yang, Fengzhen; Zhang, Chao; Baeyens, Willy R G; Zhang, Xinrong

    2002-10-15

    Strong chemiluminescence emission has been observed by mixing alkaline hydrolytic products of ethamsylate with Tween 80 in acidic rhodamine 6G solution. This phenomenon has been utilized to design a flow-injection chemiluminescence method for the determination of ethamsylate in a pharmaceutical preparation. Under the optimum conditions, the proposed procedure has a linear range between 0.05 and 2.0 microg ml(-1), with a detection limit of 0.02 microg ml(-1) for ethamsylate. The method was applied to the determination of ethamsylate in pharmaceutical preparations. The possible mechanism of this chemiluminescence reaction was proposed. Copyright 2002 Elsevier Science B.V.

  3. Errors in Postural Preparation Lead to Increased Choice Reaction Times for Step Initiation in Older Adults

    Science.gov (United States)

    Nutt, John G.; Horak, Fay B.

    2011-01-01

    Background. This study asked whether older adults were more likely than younger adults to err in the initial direction of their anticipatory postural adjustment (APA) prior to a step (indicating a motor program error), whether initial motor program errors accounted for reaction time differences for step initiation, and whether initial motor program errors were linked to inhibitory failure. Methods. In a stepping task with choice reaction time and simple reaction time conditions, we measured forces under the feet to quantify APA onset and step latency and we used body kinematics to quantify forward movement of center of mass and length of first step. Results. Trials with APA errors were almost three times as common for older adults as for younger adults, and they were nine times more likely in choice reaction time trials than in simple reaction time trials. In trials with APA errors, step latency was delayed, correlation between APA onset and step latency was diminished, and forward motion of the center of mass prior to the step was increased. Participants with more APA errors tended to have worse Stroop interference scores, regardless of age. Conclusions. The results support the hypothesis that findings of slow choice reaction time step initiation in older adults are attributable to inclusion of trials with incorrect initial motor preparation and that these errors are caused by deficits in response inhibition. By extension, the results also suggest that mixing of trials with correct and incorrect initial motor preparation might explain apparent choice reaction time slowing with age in upper limb tasks. PMID:21498431

  4. Preparation and characterization of conjugated polymers made by postpolymerization reactions of alternating polyketones.

    Science.gov (United States)

    Cheng, Chen; Guironnet, Damien; Barborak, James; Brookhart, Maurice

    2011-06-29

    Conjugated polymers possessing a poly(2,5-dimethylene-2,5-dihydrofuran) backbone were prepared through postpolymerization reaction of styrenic polyketones with bromine in one-pot reactions. The modification is proposed to proceed via condensation of two repeating units to form a fully characterized polymer with a poly(2,5-dimethylenetetrahydrofuran) backbone. Subsequent bromination and elimination of HBr yield a polymer with a fully conjugated carbon backbone. The new conjugated polymers were characterized by NMR, IR, and UV-vis spectroscopies and by CV. These polymers have strong absorption in the visible region, with the absorption peaks shifted to the NIR region upon doping with acids. The ease of the synthesis of the starting polyketone and of the modifications allows large-scale preparation of those conjugated polymers.

  5. Continuous enzyme reactions with immobilized enzyme tubes prepared by radiation cast-polymerization

    International Nuclear Information System (INIS)

    Kumakura, Minoru; Kaetsu, Isao

    1986-01-01

    Immobilized glucose oxidase tubes were prepared by radiation cast-polymerization of 2-hydroxyethyl methacrylate and tetraethyleneglycol diacrylate monomer at low temperatures. The immobilized enzyme tubes which were spirally set in a water bath were used as reactor, in which the enzyme activity varied with tube size and flow rate of the substrate. The conversion yield of the substrate in continuous enzyme reaction was about 80%. (author)

  6. Preparation of carrier-free 67Cu by the 68Zn(γ,p) reaction

    International Nuclear Information System (INIS)

    Yagi, M.; Kondo, K.

    1978-01-01

    The preparation of pure, carrier-free 67 Cu using the 68 Zn(γ, p) reaction with an isotopically enriched 68 Zn(98.97%) target is described. The production rates of 67 Cu and contaminants were determined as a function of the maximum bremsstrahlung energies between 30 and 60 MeV. The chemical separation of the carrier-free 67 Cu and the recovery of the 68 Zn target were also studied. (author)

  7. Procedure for the preparation of catalysts for application in catalytic gas phase reactions

    International Nuclear Information System (INIS)

    1976-01-01

    The invention describes the preparation of catalysts to be used in catalytic reactions in the gaseous phase. The catalytic material is disposed at the surface of a ceramic or carbon substrate (av. particle size 0.1 μ - 0.5 cm, surface area smaller than 20 m 2 /g) by bombardment of the catalytic material (Pt, Rh, Pd, Ru, Os, Ir) with energetic ions (Ne, Ar, Kr, Xe) in the vicinity of the substrate in medium vacuum

  8. Synthesising and comparing electrical properties of NTC thermistors prepared from nano powder and solid state reaction

    International Nuclear Information System (INIS)

    Azad, N.; Ghanbari Shohany, B.; Hosseini, S. M.; Kompany, A.

    2011-01-01

    In this research, NTC thermistors with composition of NiMn 2-x Co x O 4 (x = 0.4, 0.8, 1.2, 1.6) prepared by two methods: solid state reaction and sol-gel (gel-combustion). The average particle size was monitored and structure of the calcinated powders have been investigated using x-ray diffraction and tunneling electron microscopy techniques. The average particle size was estimated to be about 65 nm with the cubic and cubic + tetragonal phases for low and high cobalt concentrations, respectively. The grain size of samples verifies with scanning electron microscopy images. Upon increasing the cobalt fraction, the grain size of samples increases from about 2μm to a few μm in size. The electrical properties of these thermistors depend on the grain size. The grain size of samples made from sol-gel is smaller than from solid state reaction under the same condition. For longer sintering time of the samples prepared by gel-combustion method, the grain size was increased then the electrical parameters of nano powder improved and we obtain better results than the samples prepared from solid state reaction.

  9. Modified lignin: Preparation and use in reversible gel via Diels-Alder reaction.

    Science.gov (United States)

    Zhou, Wanpeng; Zhang, Hui; Chen, Fangeng

    2018-02-01

    In this study, popular soda lignin was modified with either furan or maleimide ring, and the modified lignins were subjected to reversible Diels-Alder reaction. A new process was proposed to prepare the functionalized lignin. A long chain was introduced to the hydroxyl groups of lignin, and then either the furan or maleimide ring was added to the other end of the chain. The test results confirmed that either the furan ring or the maleimide ring was bound to lignin. Furan- and maleimide-functionalized lignins were also combined to generate crosslinking via Diels-Alder [4+2] cycloaddition reaction. Under appropriate conditions, the formation of a gel was identified, which reverted to liquid state after retro Diels-Alder reaction upon heating at 120°C. This study reveals the significant versatility and potential of the developed strategy for the utilization of lignin-based recyclable networks. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. An alternative preparation method for ion exchanged catalysts: Solid state redox reaction

    DEFF Research Database (Denmark)

    Schneider, E.; Hagen, A.; Grunwaldt, J.-D.

    2004-01-01

    A new method for modifying zeolites with zinc is proposed. The solid state redox reaction between metallic zinc and ZSM-5 zeolites with different Si/Al ratios was investigated by temperature programmed hydrogen evolution (TPHE), X-ray absorption near edge structure (XANES) and diffuse reflectance...... infrared Fourier transform spectroscopy (DRIFTS). The evolution of hydrogen was detected at temperatures above 620 K. The source of hydrogen was the solid state redox reaction of the metal with protons of the support. The samples exhibit catalytic activity in ethane aromatization indicating that zinc...... should be located at the same sites as in catalysts prepared by conventional methods. Combination of XANES and catalytic activity point to zinc being mainly present in tetrahedral geometry under reaction conditions....

  11. Preparation and characterization of bismuth ruthenate pyrochlore via solid state reaction and sol-gel methods

    Directory of Open Access Journals (Sweden)

    Mayuree Sansernnivet

    2010-01-01

    Full Text Available Bismuth ruthenate pyrochlores, potential cathode materials for intermediate temperature solid oxide fuel cells(ITSOFCs, were prepared via solid-state and sol-gel method. Effects of the preparation routes and conditions on the phase and microstructures of the materials were investigated in this study using XRD and SEM. The study showed that the preparation method and the adding sequence of the starting meterials have a significant effect on the crystal phase and the particle size obtained. Sol-gel synthesis could yield a material with only pyrochlore structure, i.e. Bi2Ru2O7, while the solid state method yielded powder with a small amount of the secondary RuO2 phase. The sol-gel synthesis resulted in materialswith a finer particle size (~0.3-1.0 μm compared to powder synthesized via the solid state reaction method.

  12. Factors controlling the redox potential of ZnCe6 in an engineered bacterioferritin photochemical 'reaction centre'.

    Science.gov (United States)

    Mahboob, Abdullah; Vassiliev, Serguei; Poddutoori, Prashanth K; van der Est, Art; Bruce, Doug

    2013-01-01

    Photosystem II (PSII) of photosynthesis has the unique ability to photochemically oxidize water. Recently an engineered bacterioferritin photochemical 'reaction centre' (BFR-RC) using a zinc chlorin pigment (ZnCe6) in place of its native heme has been shown to photo-oxidize bound manganese ions through a tyrosine residue, thus mimicking two of the key reactions on the electron donor side of PSII. To understand the mechanism of tyrosine oxidation in BFR-RCs, and explore the possibility of water oxidation in such a system we have built an atomic-level model of the BFR-RC using ONIOM methodology. We studied the influence of axial ligands and carboxyl groups on the oxidation potential of ZnCe6 using DFT theory, and finally calculated the shift of the redox potential of ZnCe6 in the BFR-RC protein using the multi-conformational molecular mechanics-Poisson-Boltzmann approach. According to our calculations, the redox potential for the first oxidation of ZnCe6 in the BRF-RC protein is only 0.57 V, too low to oxidize tyrosine. We suggest that the observed tyrosine oxidation in BRF-RC could be driven by the ZnCe6 di-cation. In order to increase the efficiency of tyrosine oxidation, and ultimately oxidize water, the first potential of ZnCe6 would have to attain a value in excess of 0.8 V. We discuss the possibilities for modifying the BFR-RC to achieve this goal.

  13. Theoretical investigation of molecular hydrogen reactions with active centres in B6H5- and AlB6H5- clusters

    International Nuclear Information System (INIS)

    Mebel', A.M.; Charkin, O.P.

    1991-01-01

    Nonempirical calculations of sections of potential surface (PS) along the shortest way of reaction of hydrogen interaction with different active centres in AlB 5 H 5 - cluster were conducted. Mechanisms of reactions of valent-saturated hydrides (BH, AlH) and clusters (B 6 H 5 - , AlB 5 H 5 - ) with molecular hydrogen are correlated. Qualitative model enabling to form an opinion about the presence or the absence of barrier on PS of the shortest way of reactions of breaking σ-bond of H-H type on the active centre of cluster, is suggested. The model is based on analysis of the character of canonical MO reagents and products

  14. Erythema multiforme-like eruption from a slimming drug preparation cutaneous adverse drug reaction

    Directory of Open Access Journals (Sweden)

    Linda Tognetti

    2011-01-01

    Full Text Available We report a case of a 34-year-old woman presenting with an erythema multiforme (EM-like eruption. Lesions developed after a 12-day treatment with a slimming drug preparation (food integrator with thermogenic activity and a herbal remedy (pilosella tincture. Serological investigations excluded viral or bacterial infections. Patch testing with galenic preparations of both drugs demonstrated sensitization to the slimming drug preparation. According to literature reports and immune-chemical properties, those components that are likely to have triggered the skin eruption are clorazepate dipotassium and theobromine. Their interaction with other two constituents such as pseudoephedrine hydrochloride and dehydrocholic acid may have caused the adverse reaction by means of a summation effect. There are no reports specifically about EM caused by a slimming drug preparation and no studies have identified thermogenic pills as cause of EM/EM-like eruption. Weight-loss compounds in slimming preparations should be kept in mind as a possible cause of drug-induced EM-like eruption.

  15. Preparation, Characterization, and Catalytic Activity of MoCo/USY Catalyst on Hydrodeoxygenation Reaction of Anisole

    Science.gov (United States)

    Nugrahaningtyas, K. D.; Suharbiansah, R. S. R.; Rahmawati, F.

    2018-03-01

    This research aims to prepare, characterize, and study the catalytic activity of Molybdenum (Mo) and Cobalt (Co) metal with supporting material Ultra Stable Y-Zeolite (USY), to produce catalysts with activity in hydrotreatment reaction and in order to eliminate impurities compounds that containing unwanted groups heteroatoms. The bimetallic catalysts MoCo/USY were prepared by wet impregnation method with weight variation of Co metal 0%, 2%, 4%, 6%, 8%, and Mo metal 8% (w/w), respectively. Activation method of the catalyst included calcination, oxidation, reduction and the crystallinity was characterized using X-ray diffraction (XRD), the acidity of the catalyst was analyzed using Fourier Transform Infrared Spectroscopy (FT-IR) and gravimetry method, minerals present in the catalyst was analyzed using X-Ray Fluorescence (XRF), and surface of the catalyst was analyzed using Surface Area Analyzer (SAA). Catalytic activity test (benzene yield product) of MoCo/USY on hydrodeoxigenation reaction of anisole aimed to determine the effect of Mo-Co/USY for catalytic activity in the reaction hydrodeoxigenation (HDO) anisole. Based on characterization and test of catalytic activity, it is known that catalytic of MoCo/USY 2% (catalyst B) shows best activities with acidity of 10.209 mmol/g, specific area of catalyst of 426.295 m2/g, pore average of 14.135 Å, total pore volume 0.318 cc/g, and total yield of HDO products 6.06%.

  16. Shaken but prepared: Analysis of disaster response at an academic medical centre following the Boston Marathon bombings.

    Science.gov (United States)

    Osgood, Robert; Scanlon, Courtney; Jotwani, Rohan; Rodkey, Daniel; Arshanskiy, Maria; Salem, Deeb

    Over the last decade, there has been a rise in the number of mass casualty incidences (MCIs) and their subsequent effect on hospital systems. While there has been much discussion over improving procedures to treat victims of MCIs, there has not been a thorough, systems-based analysis concerning the costs incurred by hospitals during such events. Here the authors examine the history of the Hospital Incident Command Center and how its evolution at Tufts Medical Center helped mitigate the damage following the Boston Marathon Bombings. Tufts' unique variations to the Hospital Incident Command Center include strategic communication hierarchies and a 'zero cost centre' financial system which both provided for a quick and adaptive response. Operating in collaboration with the Conference of Boston Teaching Hospitals encouraged coordination and preparation during emergency situations such as mass casualty events. The direct and indirect effects on Tufts Medical Center stemming from the Boston Marathon Bombings were analysed. Tufts MC treated 36 victims immediately following the MCI. The estimated total cost during the week of April 15 to April 19, 2013 was $776,051. The cost was primarily comprised of lost revenue from cancelled outpatient and inpatient hospital services, as well as expenses incurred due to overtime pay, salary expenses, PPE kits and hospitality services. Finally, the authors examine ways to reduce the future costs during emergency situations through increasing communication with employees, understanding the source of all direct expenses, and mitigating excess risk by developing partnerships with other hospital systems.

  17. Preparation of Pd-Diimine@SBA-15 and Its Catalytic Performance for the Suzuki Coupling Reaction

    Directory of Open Access Journals (Sweden)

    Jiahuan Yu

    2016-11-01

    Full Text Available A highly efficient and stable Pd-diimine@SBA-15 catalyst was successfully prepared by immobilizing Pd onto diimine-functionalized mesoporous silica SBA-15. With the help of diimine functional groups grafted onto the SBA-15, Pd could be anchored on a support with high dispersion. Pd-diimine@SBA-15 catalyst exhibited excellent catalytic performance for the Suzuki coupling reaction of electronically diverse aryl halides and phenylboronic acid under mild conditions with an ultralow amount of Pd (0.05 mol % Pd. When the catalyst amount was increased, it could catalyze the coupling reaction of chlorinated aromatics with phenylboronic acid. Compared with the catalytic performances of Pd/SBA-15 and Pd-diimine@SiO2 catalysts, the Pd-diimine@SBA-15 catalyst exhibited higher hydrothermal stability and could be repeatedly used four times without a significant decrease of its catalytic activity.

  18. Antibacterial Characteristics and Activity of Water-Soluble Chitosan Derivatives Prepared by the Maillard Reaction

    Directory of Open Access Journals (Sweden)

    Ying-Chien Chung

    2011-10-01

    Full Text Available The antibacterial activity of water-soluble chitosan derivatives prepared by Maillard reactions against Staphylococcus aureus, Listeria monocytogenes, Bacillus cereus, Escherichia coli, Shigella dysenteriae, and Salmonella typhimurium was examined. Relatively high antibacterial activity against various microorganisms was noted for the chitosan-glucosamine derivative as compared to the acid-soluble chitosan. In addition, it was found that the susceptibility of the test organisms to the water-soluble chitosan derivative was higher in deionized water than in saline solution. Metal ions were also found to reduce the antibacterial activity of the water-soluble chitosan derivative on S. aureus. The marked increase in glucose level, protein content and lactate dehydrogenase (LDH activity was observed in the cell supernatant of S. aureus exposed to the water-soluble chitosan derivative in deionized water. The results suggest that the water-soluble chitosan produced by Maillard reaction may be a promising commercial substitute for acid-soluble chitosan.

  19. SiC Conversion Coating Prepared from Silica-Graphite Reaction

    Directory of Open Access Journals (Sweden)

    Back-Sub Sung

    2017-01-01

    Full Text Available The β-SiC conversion coatings were successfully synthesized by the SiO(v-graphite(s reaction between silica powder and graphite specimen. This paper is to describe the effects on the characteristics of the SiC conversion coatings, fabricated according to two different reaction conditions. FE-SEM, FE-TEM microstructural morphologies, XRD patterns, pore size distribution, and oxidation behavior of the SiC-coated graphite were investigated. In the XRD pattern and SAD pattern, the coating layers showed cubic SiC peak as well as hexagonal SiC peak. The SiC coatings showed somewhat different characteristics with the reaction conditions according to the position arrangement of the graphite samples. The SiC coating on graphite, prepared in reaction zone (2, shows higher intensity of beta-SiC main peak (111 in XRD pattern as well as rather lower porosity and smaller main pore size peak under 1 μm.

  20. Passivation effects on quantum dots prepared by successive ionic layer adsorption and reaction

    Science.gov (United States)

    Dai, Qilin; Maloney, Scott; Chen, Weimin; Poudyal, Uma; Wang, Wenyong

    2016-06-01

    ZnS is typically used to passivate semiconductor quantum dots (QDs) prepared by the successive ionic layer adsorption and reaction (SILAR) method for solar cell applications, while for colloidal QDs, organic ligands are usually used for this passivation purpose. In this study we utilized oleylamine and oleic acid ligands, besides ZnS, to passivate QDs prepared by the SILAR approach, and investigated their effects on the incident photon-to-current efficiency (IPCE) performance of the solar cells. It was observed that oleylamine passivation decreased device performance, while oleic acid passivation improved the IPCE of the cells. Redshift of the IPCE onset wavelength was also observed after oleic acid coating, which was attributed to the delocalization of excitons in the CdS QDs.

  1. Preparation of radioactive acetyl-l-carnitine by an enzymatic exchange reaction

    International Nuclear Information System (INIS)

    Emaus, R.; Bieber, L.L.

    1982-01-01

    A rapid method for the preparation of [1- 14 C]acetyl-L-carnitine is described. The method involves exchange of [1- 14 C]acetic acid into a pool of unlabeled acetyl-L-carnitine using the enzymes acetyl-CoA synthetase and carnitine acetyltransferase. After isotopic equilibrium is attained, radioactive acetylcarnitine is separated from the other reaction components by chromatography on Dowex 1 (C1 - ) anion exchange resin. One of the procedures used to verify the product [1- 14 C]acetyl-L-carnitine can be used to synthesize (3S)-[5- 14 C]citric acid

  2. Sample preparation techniques based on combustion reactions in closed vessels - A brief overview and recent applications

    International Nuclear Information System (INIS)

    Flores, Erico M.M.; Barin, Juliano S.; Mesko, Marcia F.; Knapp, Guenter

    2007-01-01

    In this review, a general discussion of sample preparation techniques based on combustion reactions in closed vessels is presented. Applications for several kinds of samples are described, taking into account the literature data reported in the last 25 years. The operational conditions as well as the main characteristics and drawbacks are discussed for bomb combustion, oxygen flask and microwave-induced combustion (MIC) techniques. Recent applications of MIC techniques are discussed with special concern for samples not well digested by conventional microwave-assisted wet digestion as, for example, coal and also for subsequent determination of halogens

  3. Preparation and Characterization of Nicke-iron Alloy Film as Freestanding Electrode for Oxygen Evolution Reaction

    Directory of Open Access Journals (Sweden)

    Yao Mengqi

    2018-01-01

    Full Text Available This work reports the porous nicke-iron alloy film supported on stainless steel mesh as freestanding electrode for enhanced oxygen evolution reaction (OER catalyst prepared from an one step electrodeposition method. Results indicated that the porous nickle-iron alloy film exhibits a low overpotential of 270 mV at 10 mA cm-2 and excellent electroconductibility. The superior OER properties can be attributed to its novel synthetic process, conductive substrate and porous structure. This work will provide a new strategy to fabricate alloy film for OER electrocatalyst.

  4. Reaction of uranium oxides with chlorine and carbon or carbon monoxide to prepare uranium chlorides

    Energy Technology Data Exchange (ETDEWEB)

    Haas, P.A.; Lee, D.D.; Mailen, J.C.

    1991-11-01

    The preferred preparation concept of uranium metal for feed to an AVLIS uranium enrichment process requires preparation of uranium tetrachloride (UCI{sub 4}) by reacting uranium oxides (UO{sub 2}/UO{sub 3}) and chlorine (Cl{sub 2}) in a molten chloride salt medium. UO{sub 2} is a very stable metal oxide; thus, the chemical conversion requires both a chlorinating agent and a reducing agent that gives an oxide product which is much more stable than the corresponding chloride. Experimental studies in a quartz reactor of 4-cm ID have demonstrated the practically of some chemical flow sheets. Experimentation has illustrated a sequence of results concerning the chemical flow sheets. Tests with a graphite block at 850{degrees}C demonstrated rapid reactions of Cl{sub 2} and evolution of carbon dioxide (CO{sub 2}) as a product. Use of carbon monoxide (CO) as the reducing agent also gave rapid reactions of Cl{sub 2} and formation of CO{sub 2} at lower temperatures, but the reduction reactions were slower than the chlorinations. Carbon powder in the molten salt melt gave higher rates of reduction and better steady state utilization of Cl{sub 2}. Addition of UO{sub 2} feed while chlorination was in progress greatly improved the operation by avoiding the plugging effects from high UO{sub 2} concentrations and the poor Cl{sub 2} utilizations from low UO{sub 2} concentrations. An UO{sub 3} feed gave undesirable effects while a feed of UO{sub 2}-C spheres was excellent. The UO{sub 2}-C spheres also gave good rates of reaction as a fixed bed without any molten chloride salt. Results with a larger reactor and a bottom condenser for volatilized uranium show collection of condensed uranium chlorides as a loose powder and chlorine utilizations of 95--98% at high feed rates. 14 refs., 7 figs., 14 tabs.

  5. Acetate self-mixing and direct thermal reaction for preparation of LiCoO2

    International Nuclear Information System (INIS)

    Jung, Bum-Young; Kang, Hyun-Koo; Jeong, In-Seong; Han, Kyoo-Seung; Lee, Youngil; Choo, Jaebum; Ryu, Kwang Sun

    2004-01-01

    Layered LiCoO 2 as a cathode material for rechargeable lithium battery is prepared using the acetate self-mixing method. Using this method, the preparation procedure consists of just two steps: spontaneous and homogeneous mixing of molten acetates at 80 deg. C, as well as direct thermal reaction at high temperature without any pulverization, grinding, agglomeration, particle morphology controlling, particle size controlling, and even artificial stirring of reactants. When lithium and cobalt acetates are exposed to the temperature of 80 deg. C, they can be fluidized substances by themselves without any solvents and spontaneously mixed together. In this way, layered LiCoO 2 phase is prepared by just simple heat treatment. The heating at 350 deg. C is interposed to accomplish steady intermediate phase translation without any intermittent cooling. The 7 Li MAS NMR and Raman spectra upon the thermal exposure of the reactants demonstrate the feature of the spontaneous mixing process of the molten reactants. The LiCoO 2 prepared by the acetate self-mixing method show quite prospective properties as a cathode material for lithium rechargeable battery, an initial discharge capacity of 149.5 mAh/g and the discharge capacity retention of 98.9% and 97.5% after 10 and 20 cycles, respectively

  6. Molar extinction coefficients and other properties of an improved reaction center preparation from Rhodopseudomonas viridis

    Energy Technology Data Exchange (ETDEWEB)

    Clayton, R.K.; Clayton, B.J.

    1978-01-01

    Reaction centers have been purified from chromatophores of Rhodopseudomonas viridis by treatment with lauryl dimethyl amine oxide followed by hydroxyapatite chromatography and precipitation with ammonium sulfate. The absorption spectrum at low temperature shows bands at 531 and 543 nm, assigned to two molecules of bacteriopheophytin b. The 600 nm band of bacteriochlorophyll b is resolved at low temperature into components at 601 and 606.5 nm. At room temperature the light-induced difference spectrum shows a negative band centered at 615 nm, where the absorption spectrum shows only a week shoulder adjacent to the 600 nm band. The fluorescence spectrum shows a band at 1000 nm and no fluorescence corresponding to the 830 nm absorption band. Two molecules of cytochrome 558 and three of cytochrome 552 accompany each reaction center. The differential extinction coefficient (reduced minus oxidized) of cytochrome 558 nm was estimated as 20 +- 2 mM/sup -1/.cm/sup -1/ through a coupled reaction with equine cytochrome c. The extinction coefficient of reaction centers at 960 nm was determined to be 123 +- 25 mM/sup -1/.cm/sup -1/ by measuring the light-induced bleaching of P-960 and the coupled oxidation of cytochrome 558. The corresponding extinction coefficient at 830 nm is 300 +- 65 mM/sup -1/.cm/sup -1/. The absorbance ratio ..cap alpha../sub 280nm/..cap alpha../sub 830nm/ in our preparations was 2.1, and there was 190 kg protein per mol of reaction centers. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed three major components of apparent molecular weights 31,000, 37,000, and 41,000.

  7. WO{sub 3} nanorods prepared by low-temperature seeded growth hydrothermal reaction

    Energy Technology Data Exchange (ETDEWEB)

    Ng, Chai Yan [School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia); Abdul Razak, Khairunisak, E-mail: khairunisak@eng.usm.my [School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia); NanoBiotechnology Research and Innovation (NanoBRI), Institute for Research in Molecular Medicine (INFORMM), Universiti Sains Malaysia, 11800 USM, Penang (Malaysia); Lockman, Zainovia, E-mail: zainovia@eng.usm.my [School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia)

    2014-03-05

    Highlights: • WO{sub 3} nanorods with 5–10 nm diameter were grown directly on seeded tungsten foil. • WO{sub 3} nanorods were successfully grown at low temperature of 80 °C. • WO{sub 3} nanorods were grown on the entire surface of the seed layer after 24 h. • Annealed nanorods showed better electrochromic properties than as-made nanorods. -- Abstract: This work describes the first tungsten oxide (WO{sub 3}) nanorods hydrothermally grown on W foil. WO{sub 3} nanorods were successfully grown at low hydrothermal temperature of 80 °C by seeded growth hydrothermal reaction. The seed layer was prepared by thermally oxidized the W foil at 400 °C for 0.5 h. This work discusses the effect of hydrothermal reaction and annealing period on the morphological, structural, and electrochromic properties of WO{sub 3} nanorods. Various hydrothermal reaction periods (8–24 h) were studied. Monoclinic WO{sub 3} nanorods with 5–10 nm diameter were obtained after hydrothermal reaction for 24 h. These 24 h WO{sub 3} nanorods were also annealed at 400 °C with varying dwelling periods (0.5–4 h). Electrochromic properties of WO{sub 3} nanorods in an acidic electrolyte were analyzed using cyclic voltammetry and UV–vis spectrophotometry. WO{sub 3} nanorods annealed at 400 °C for 1 h showed the highest charge capacity and the largest optical contrast among the 24 h WO{sub 3} films. The sample also showed good cycling stability without significant degradation. Based on the results, the reaction mechanism of WO{sub 3} nanorod formation on W foil was proposed.

  8. Nitrogen-doped graphene prepared by a transfer doping approach for the oxygen reduction reaction application

    Science.gov (United States)

    Mo, Zaiyong; Zheng, Ruiping; Peng, Hongliang; Liang, Huagen; Liao, Shijun

    2014-01-01

    Well defined nitrogen-doped graphene (NG) is prepared by a transfer doping approach, in which the graphene oxide (GO) is deoxidized and nitrogen doped by the vaporized polyaniline, and the GO is prepared by a thermal expansion method from graphite oxide. The content of doped nitrogen in the doped graphene is high up to 6.25 at% by the results of elements analysis, and oxygen content is lowered to 5.17 at%. As a non-precious metal cathode electrocatalyst, the NG catalyst exhibits excellent activity toward the oxygen reduction reaction, as well as excellent tolerance toward methanol. In 0.1 M KOH solution, its onset potential, half-wave potential and limiting current density for the oxygen reduction reaction reach 0.98 V (vs. RHE), 0.87 V (vs. RHE) and 5.38 mA cm-2, respectively, which are comparable to those of commercial 20 wt% Pt/C catalyst. The well defined graphene structure of the catalyst is revealed clearly by HRTEM and Raman spectra. It is suggested that the nitrogen-doping and large surface area of the NG sheets give the main contribution to the high ORR catalytic activity.

  9. Efficacy and safety of topical Trikatu preparation in, relieving mosquito bite reactions: a randomized controlled trial.

    Science.gov (United States)

    Maenthaisong, Ratree; Chaiyakunapruk, Nathorn; Tiyaboonchai, Waree; Tawatsin, Apiwat; Rojanawiwat, Archawin; Thavara, Usavadee

    2014-02-01

    Trikatu is composed of dried fruits of Piper nigrum L and Piper retrofractum Vahl, and dried rhizomes of Zingiber officinale R. Although this preparation has been used to relieve pruritis, pain, and inflammation for a long time, there is no clinical evidence to confirm its efficacy and safety. Therefore, we performed a double-blind, within person-randomized controlled study of 30 healthy volunteers to determine efficacy and safety of topical Trikatu on mosquito bite reactions. All subjects were bitten by Aedes aegypti laboratory mosquitoes on their forearms and they were randomly assigned arms to apply either Trikatu or reference product on the mosquito bite papule. The main outcome was the difference of papule size reduction at 30 min, measured by a caliper, between the Trikatu and reference arms. Pruritis, redness, pain, and patient satisfaction were assessed at 15, 30, 60, 180, and 360 min as secondary outcomes. There were no significant differences between treatment and reference arms on any outcome at any time of measurement. Trikatu did not show additional effects for relieving mosquito bite reaction as compared with the reference product containing camphor, menthol, and eucalyptus. For further study, it is very important to consider a proper selection of subjects, comparator product, and concentration of extract when Trikatu preparation is investigated. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. Formation of intermediate structures during the thermal transformation of lignin. 5. Contribution of the reactions of formation and recombination of paramagnetic centres

    Energy Technology Data Exchange (ETDEWEB)

    Domburg, G E; Skripchenko, T N

    1982-01-01

    ESR spectra were determined for samples of softwood (spruce) lignin and hardwood (aspen or birch) lignin at 20-400 degrees C and after cooling to 20 degrees C. Results provide evidence for a change from low-temperature to high-temperature reactions at 300-350 degrees C (higher in hardwoods than softwoods) associated with increased formation and recombination of paramagnetic centres (free radicals). A scheme is presented for the sequence of reactions leading to charcoal formation over the temperature range 100-500 degrees C.

  11. Preparation, characterization and toxicology properties of α- and β-chitosan Maillard reaction products nanoparticles.

    Science.gov (United States)

    Zhang, Hongcai; Zhang, Yiwen; Bao, Erjaing; Zhao, Yanyun

    2016-08-01

    In this study, β-chitosan (CS) Maillard reaction (MR) NPs was prepared to improve the water solubility of CS NPs. The α- and β-CS MR was firstly induced by high intensity ultrasound-assisted (UA) water-bath heating at 80°C for 8h. The α- and β-CS Maillard reaction products (MRPs NPs were then prepared by ionic gelation method between the positively charged primary amino groups of CS and the negatively charged groups of sodium tripolyphosphate (TPP). The α- and β-CS MRPs NPs had particle size of 42.49 and 61.74nm, and Zeta-potential of 27.43 and 35.13mV, respectively. The prepared α- and β-CS MRPs NPs was characterized by transmission electron microscope (TEM), Fourier transform infrared spectrometer (FT-IR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA)-differential scanning calorimetry (DSC) to verify whether α- and β-CS MRPs has been incorporated into the CS NPs. The α- and β-CS MRPs NPs exhibited no significant difference (p>0.05) in antioxidant activity compared with α- and β-CS MRPs at the same concentration based on reducing power, DPPH radical scavenging activity, and ORAC values. The cytotoxicity test of α- and β-CS MRPs NPs showed good cell viability (70.86-99.16%) of human pulmonary microvascular endothelial cells (HLMVEC) at the concentration range from 0.12 to 1mg/mL, and fluorescein-5-isothiocyanate (FITC)-α- and β-CS MRPs NPs maintained the morphological characteristics of living cells. These results showed that α- and β-CS MRPs NPs can be used as water-soluble antioxidant substances for applications in food and other fields. Copyright © 2016. Published by Elsevier B.V.

  12. Metallurgically prepared NiCu alloys as cathode materials for hydrogen evolution reaction

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Kunchan; Xia, Ming [State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083 (China); Xiao, Tao [2nd Xiangya Hospital, Central South University, Changsha 410011 (China); Lei, Ting, E-mail: tlei@mail.csu.edu.cn [State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083 (China); Yan, Weishan [State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083 (China)

    2017-01-15

    Ni−Cu bimetallic alloys with Cu content of 5, 10, 20, 30 and 50 wt% are prepared by powder metallurgy method, which consisted of powder mixing, pressing and sintering processes. The X-ray diffraction (XRD) measurement confirms that all the five Ni−Cu alloys possess the f.c.c. structure. The hydrogen evolution reaction (HER) activity of the prepared Ni−Cu alloy electrodes was studied in 6 M KOH solution by cathodic current-potential curves and electrochemical impedance spectroscopy (EIS) techniques. It was found that the electrocatalytic activity for the HER depended on the composition of Ni−Cu alloys, where Ni−10Cu alloy exhibited considerably higher HER activity than Ni plate and other Ni−Cu alloys, indicative of its chemical composition related intrinsic activity. - Highlights: • Ni−Cu alloys with various Cu contents were prepared by powder metallurgy method. • Ni−Cu alloy exhibits chemical composition related synergistic effect for HER activity. • Ni−10Cu alloy electrode presents a most efficient activity for HER. • Two time constants are observed in Nyquist curve and both of them related to the kinetics of HER.

  13. Metallurgically prepared NiCu alloys as cathode materials for hydrogen evolution reaction

    International Nuclear Information System (INIS)

    Wang, Kunchan; Xia, Ming; Xiao, Tao; Lei, Ting; Yan, Weishan

    2017-01-01

    Ni−Cu bimetallic alloys with Cu content of 5, 10, 20, 30 and 50 wt% are prepared by powder metallurgy method, which consisted of powder mixing, pressing and sintering processes. The X-ray diffraction (XRD) measurement confirms that all the five Ni−Cu alloys possess the f.c.c. structure. The hydrogen evolution reaction (HER) activity of the prepared Ni−Cu alloy electrodes was studied in 6 M KOH solution by cathodic current-potential curves and electrochemical impedance spectroscopy (EIS) techniques. It was found that the electrocatalytic activity for the HER depended on the composition of Ni−Cu alloys, where Ni−10Cu alloy exhibited considerably higher HER activity than Ni plate and other Ni−Cu alloys, indicative of its chemical composition related intrinsic activity. - Highlights: • Ni−Cu alloys with various Cu contents were prepared by powder metallurgy method. • Ni−Cu alloy exhibits chemical composition related synergistic effect for HER activity. • Ni−10Cu alloy electrode presents a most efficient activity for HER. • Two time constants are observed in Nyquist curve and both of them related to the kinetics of HER.

  14. Study of sample preparation in the measurement of 36Ar(n, p)36Cl reaction cross section

    International Nuclear Information System (INIS)

    Jiang Songsheng; Hemick, T.K.

    1992-01-01

    The preparation of enriched 36 Ar gas samples and 36 Cl samples for the use in the AMS measurement of 36 Ar(n, p) 36 Cl reaction cross section was described. The 36 Ar samples prepared had the volumes of about 0.4 ml and the weights of about 0.5 mg. The uncertainty in atomic numbers of 36 Ar was (0.3∼0.4)%. The reaction product, 36 Cl, in the 36 Ar was collected and the AgCl samples were prepared

  15. Preparation of carrier-free Phosphorus-32 from 31P(n,γ )32P reaction

    International Nuclear Information System (INIS)

    Rafii, H.; Arbab Zavar, H.; Avaz Moghadam, S.

    1999-01-01

    The phosphorus-32 is a widely used radioisotope as as tracer or radioactive source in nuclear medicine, and in many other biotechnical applications. In this paper, preparation of carrier-free P-32 with a high specific activity was studied by 31 P(n, γ) 32 P reaction. The anhydrous KH 2 PO 4 , as a target material, was irradiated in Tehran Nuclear Research Reactor with a neutron flux of 2.5x10 13 n/cm 2 .sec. The P-32 produced as a result of Szilard-Chalmers effect was isolated from the target by a strong anion exchange resin, (Dowex - X 8). The quality control of the product shows a high chemical, and radiochemical purity (>98%) and the increase specific activity depends on the irradiation time

  16. Preparation of nitrogen-doped graphitic carboncages as electrocatalyst for oxygen reduction reaction

    International Nuclear Information System (INIS)

    Yan, Jing; Meng, Hui; Yu, Wendan; Yuan, Xiaoli; Lin, Worong; Ouyang, Wenpeng; Yuan, Dingsheng

    2014-01-01

    Nitrogen-doped carbon nanomaterials have been attracted increasing research interests in lithium-O 2 and Zinc-O 2 batteries, ultracapacitors and fuel cells. Herein, nitrogen-doped graphitic carboncages (N-GCs) have been prepared by mesoporous Fe 2 O 3 as a catalyst and lysine as a nitrogen doped carbon source. Due to the catalysis of Fe 2 O 3 , the N-GCs have a high graphitization degree at a low temperature, which is detected by X-ray diffraction and Raman spectrometer. Simultaneously, the heteroatom nitrogen is in-situ doped into carbon network. Therefore, the excellent electrocatalysis performance for oxygen reduction reaction is expected. The electrochemical measurement indicates that The N-GCs for oxygen reduction reaction in O 2 -saturated 0.1 mol L −1 KOH show a four-electron transfer process and exhibit excellent electrocatalytic activity (E ORR = -0.05 V vs. Ag/AgCl) and good stability (i/i 0 = 90% at -0.35 V after 4000 s with a rotation rate of 1600 rpm)

  17. Preparation and Characterization of Enzyme Compartments in UV-Cured Polyurethane-Based Materials and Their Application in Enzymatic Reactions

    Directory of Open Access Journals (Sweden)

    Diana Uhrich

    2017-11-01

    Full Text Available The preparation and characterization of UV-cured polyurethane-based materials for the mild inclusion immobilization of enzymes was investigated. Full curing of the polymer precursor/enzyme solution mixture was realized by a short irradiation with UV-light at ambient temperatures. The included aqueous enzyme solution remains highly dispersed in the polymer material with an even size distribution throughout the polymer material. The presented concept provides stable enzyme compartments which were applied for an alcohol dehydrogenase-catalyzed reduction reaction in organic solvents. Cofactor regeneration was achieved by a substrate-coupled approach via 2-propanol or an enzyme-coupled approach by a glucose dehydrogenase. This reaction concept can also be used for a simultaneous application of contrary biocatalytic reaction conditions within an enzymatic cascade reaction. Independent polymer-based reaction compartments were provided for two incompatible enzymatic reaction systems (alcohol dehydrogenase and hydroxynitrile lyase, while the relevant reactants diffuse between the applied compartments.

  18. Tandem Reaction of Cationic Copolymerization and Concertedly Induced Hetero-Diels-Alder Reaction Preparing Sequence-Regulated Polymers.

    Science.gov (United States)

    Matsumoto, Suzuka; Kanazawa, Arihiro; Kanaoka, Shokyoku; Aoshima, Sadahito

    2017-06-14

    A unique tandem reaction of sequence-controlled cationic copolymerization and site-specific hetero-Diels-Alder (DA) reaction is demonstrated. In the controlled cationic copolymerization of furfural and 2-acetoxyethyl vinyl ether (AcOVE), only the furan ring adjacent to the propagating carbocation underwent the hetero-DA reaction with the aldehyde moiety of another furfural molecule. A further and equally important feature of the copolymerization is that the obtained copolymers had unprecedented 2:(1 + 1)-type alternating structures of repeating sequences of two VE and one furfural units in the main chain and one furfural unit in the side chain. The specific DA reaction is attributed to the delocalization of the positive charge to the side furan ring.

  19. Continuous-flow retro-Diels-Alder reaction: an efficient method for the preparation of pyrimidinone derivatives.

    Science.gov (United States)

    Nekkaa, Imane; Palkó, Márta; Mándity, István M; Fülöp, Ferenc

    2018-01-01

    The syntheses of various pyrimidinones as potentially bioactive products by means of the highly controlled continuous-flow retro-Diels-Alder reaction of condensed pyrimidinone derivatives are presented. Noteworthy, the use of this approach allowed us to rapidly screen a selection of conditions and quickly confirm the viability of preparing the desired pyrimidinones in short reaction times. Yields typically higher than those published earlier using conventional batch or microwave processes were achieved.

  20. Hydrogen bonding between the QB site ubisemiquinone and Ser-L223 in the bacterial reaction centre – a combined spectroscopic and computational perspective^

    OpenAIRE

    Martin, Erik; Baldansuren, Amgalanbaatar; Lin, Tzu-Jen; Samoilova, Rimma I.; Wraight, Colin A.; Dikanov, Sergei A.; O’Malley, Patrick J.

    2012-01-01

    In the QB site of the Rba. sphaeroides photosynthetic reaction centre the donation of a hydrogen bond from the hydroxyl group of Ser-L223 to the ubisemiquinone formed after the first flash is debatable. In this study we use a combination of spectroscopy and quantum mechanics/molecular mechanics (QM/MM) calculations to comprehensively explore this topic. We show that ENDOR, ESEEM and HYSCORE spectroscopic differences between the mutant L223SA and the wild type sample (WT) are negligible, indic...

  1. Preparation of strained axially chiral (1,5)naphthalenophanes by photo-dehydro-Diels-Alder reaction.

    Science.gov (United States)

    Wessig, Pablo; Matthes, Annika

    2011-03-02

    The preparation of 10 (1,5)naphthalenophanes (10a-j) by photo-dehydro-Diels-Alder (PDDA) reaction is described. Owing to hindered rotation around the biaryl axis, compounds 10 are axially chiral and the separation of enantiomers by chiral HPLC was demonstrated in three cases (10a,b,e). The absolute configuration of the isolated enantiomers could be unambiguously determined by comparison of calculated and measured circular dichroism (CD) spectra. Furthermore, we analyzed ring strain phenomena of (1,5)naphthalenophanes 10. Depending on the length of the linker units, one can distinguish three classes of naphthalenophanes. Compounds 10a-c are highly strained (E(STR) = 7-31 kcal/mol), and the strain is caused by small bond angles in the linker unit and deformation of the naphthalene moiety. Another type of strain is observed if the linker unit becomes relatively long (10g,h) originating from transannular interactions and is comparable with the well-known strain of medium sized rings. The naphthalenophanes 10d-f with a linker length of 10-14 atoms are only marginally strained. To clearly discriminate the different sources of strain, we defined two geometrical parameters (average central dihedral angle δ(C) and naphthalene thickness D(N)) and demonstrated that they are well-suited to indicate naphthalene deformation of our naphthalenophanes 10 as well as of ten model naphthalenophanes (I-X) with different linker lengths and linking positions.

  2. Preparation of Ultra-Fine Nickel Manganite Powders and Ceramics by a Solid-State Coordination Reaction

    NARCIS (Netherlands)

    Fang, Dao-lai; Wang, Zhongbing; Wang, Zhichun; Yang, Pinghua; Liu, W.; Liu, Wei; Winnubst, Aloysius J.A.; Chen, Chusheng

    2006-01-01

    A solid-state coordination reaction was adopted to prepare negative temperature coefficient ceramics. A mixed oxalate NiMn2(C2O4)3·6H2O, a coordination compound, was synthesized by milling a mixture of nickel acetate, manganese acetate, and oxalic acid for 5 h at room temperature. An ultrafine

  3. Nuclear chemical method for preparation of free carbenium ions and radiochemical investigation of reactions of these particles

    International Nuclear Information System (INIS)

    Nefedov, V.D.; Sinotova, E.N.; Toropova, M.A.

    1980-01-01

    Tritium nuclear transformation (β-decay) in the composition of the molecules of hydrocarbons, appearance of primary molecular ions and formation of free carbenium ion are the main items of nuclear-chemical method of preparation of free carbenium ions. The method permits to prepare carbenium ions present in free state, i.e. without counterion and without solvate sheath of variou nitial localization of the charge. The rate of carbenium ion generation is strictly definite and does not depend upon outer conditions. The method suggested permits to prepare carbenium ions in all phases, study their reactions with individual substances in gaseous, liquid and solid states. The study of ion-molecular reactions is carried out using radiochemical method. The analysis of the products is made using the method of gaseous radiochromatography. Development of preparation techniques of carbenium ions and their analogues, study of the reactions of these particles with different classes of compounds, investigation of the effect of different factors upon procedure of ion-molecular reactions are the main directions of the investigations

  4. Synthesis by the Pechini method and reaction combustion for the preparation of TiO2: a comparative analysis

    International Nuclear Information System (INIS)

    Almeida, E.P.; Ribeiro, P.C.; Freitas, N.L.; Lira, H.L.; Costa, A.C.F.M. da; Kiminami, R.H.G.A.

    2009-01-01

    The aim of this work is to prepare TiO 2 powder by Pechini and combustion reaction methods. A comparative analysis between the structural and morphological results obtained by the two methods was investigated. The powders were characterized by X-ray diffractions (XRD), infrared analysis, nitrogen adsorption (BET) and particle size distribution. The results from XRD show that the powders prepared by Pechini method and by combustion reaction using aniline as fuel, present anatase as major phase and traces of rutile phase. The values of crystallite size and surface area from BET were: 30 e 44 nm; 6.2 e 4.4 m 2 /g, for the powders prepared by Pechini and combustion reaction, respectively. The values of particle size were: 21.9 e 5.3 μm, for the powders prepared by Pechini and combustion reaction, respectively. The Pechini method was more suitable to obtain powders with irregular agglomerates, in the block shape with particles bonded softly and small crystallite size. (author)

  5. A zinc enolate of amide: Preparation and application in reformasky-like reaction leading to β-hydroxy amides

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Hyun Hee; Kim, Seung Hoi [Dept. of Chemistry, Dankook University, Cheonan (Korea, Republic of)

    2015-04-15

    One of the best known functionalized organic complexes is the β-hydroxy carbonyl compound. This unique functionality has been frequently found in naturally occurring bioactive derivatives. The cross-coupling reaction of A with aldehydes were carried out in the absence of any catalyst and completed in most cases within 1.0 h at room temperature. We have developed an efficient synthetic route for the preparation of β-hydroxy amides. The method involved the preparation of room-temperature-stable organo zinc reagents (A, B, and C) in THF and their subsequent coupling reactions with various carbonyl derivatives under mild conditions. Significantly, this approach using zinc enolate of amides could expand the scope of Reformatsky-like reactions. Further studies to elucidate this synthetic protocol are currently under way in our laboratory.

  6. Synthesis of substituted Calix[6] arene and 18F labeling reaction as catalyst in preparation of 18F-FET

    International Nuclear Information System (INIS)

    Peng Cheng; Ma Yunchuan; Chen Xiaoxiao; Li Guixia; Li Shilei; Zhang Shuting; He Yong; Qi Chuanmin

    2011-01-01

    The phase transfer catalyst Substituted Calix[6] arene was prepared and it was used as catalyst to prepare the tumor diagnostic drug 18 F-FET. The results showed that para-sulfonated-calix[6] arene not only catalyzes 19 F substitution reaction, but also catalyzes 18 F labelling reaction with radiochemical yield of 11%. However, para-tert-butyl-calix[6] arene has no catalytic activity for the 19 F substitution reaction nor the 18 F labelling reaction of the precursor of FET. The catalyzing of para-sulfonated-calix[6]arene may be related to it's sulfonate groups, which participated in the coordination reaction and increased the polarity of calyx[6] arene and so on. Although radiochemical yield of the para-sulfonated-calix[6] arene catalyzed 18 F labeling of the precursor of FET was much lower than that obtained by Kryptofix 2. 2. 2, this study still has significant meaning for us to find better substituted Calix[6] arene catalysts by optimizing the reaction conditions. (authors)

  7. Preparation of graphene/nile blue nanocomposite: Application for oxygen reduction reaction and biosensing

    International Nuclear Information System (INIS)

    Shervedani, Reza Karimi; Amini, Akbar

    2015-01-01

    Highlights: •New nanocomposite is synthesized by electrochemical polymerization of Nile blue and reduction of GO on GCE. •The nanocomposite is characterized by SEM, UV–vis and electrochemical methods. •High electrocatalytic activity was observed for O 2 reduction on GNs-NB nanocomposite. •GCE-GNs-NB poly was tested successfully for immobilization of GOx and detection of glucose. -- Abstract: Nile blue/graphene (NB-GNs) nanocomposite was synthesized for the first time via a green and effective one-step electrochemical method, allowing to reduce graphene oxide (GO) and NB on the glassy carbon electrode (GCE) simultaneously and construct GCE-GNs-NB poly composite. The composite was characterized by scanning electron microscopy (SEM), UV–Vis spectroscopy, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The electrochemical results obtained in the absence of any redox probe, where NB was active, allowed to trace step-by-step addition of the NB-GNs nanocomposite onto the GCE electrode surface, supporting formation of the GCE-GNs-NB poly composite. The electrocatalytic activity of the as-prepared GCE-GNs-NB poly towards O 2 reduction was studied in neutral medium. The results revealed excellent electrocatalytic performance for two-electron reduction of oxygen, suggesting its potential application as metal-free electrocatalysts for O 2 reduction reaction. Application of the GCE-GNs-NB poly in electrochemical biosensing was demonstrated by immobilization of glucose oxidase (GOx) on the surface of GCE-GNs-NB poly , and then, using it for sensing of glucose. The biosensor exhibited a linear response, from 0.2 to 2.0 mM glucose, with a low detection limit, 2.1 μM, and high sensitivity, 67.0 μA mM −1 cm −2 , obtained by cyclic voltammetry method. The proposed biosensor was successfully tested for determination of glucose in blood serum samples

  8. Preparation, Characterization and NO-CO Redox Reaction Studies over Palladium and Rhodium Oxides Supported on Manganese Dioxide

    Directory of Open Access Journals (Sweden)

    M.S. Fal Desai

    2015-03-01

    Full Text Available The catalytic activity of PdO/MnO2 and Rh2O3/MnO2 is investigated for NO-CO redox reaction. Supported catalysts are prepared by wet impregnation method. Among the tested catalysts, PdO/MnO2 shows higher activity for this reaction. Active metal dispersion on MnO2 enhances the selectivity for N2 over N2O in this reaction. The XRD substantiate the formation of MnO2 monophasic phase. SEM images show the formation of elongated particles. TEM images indicate nano-size rod-like morphologies. An increase in the catalytic activity is observed on supported Pd and Rh oxides on MnO2. Temperature programed desorption studies with NO and CO are undertaken to investigate the catalytic surface studies. © 2015 BCREC UNDIP. All rights reservedReceived: 22nd November 2014; Revised: 31st December 2014; Accepted: 2nd January 2015How to Cite: Fal Desai, M.S., Kunkalekar, R.K., Salker, A.V. (2015. Preparation, Characterization and NO-CO Redox Reaction Studies over Palladium and Rhodium Oxides Supported on Manganese Dioxide. Bulletin of Chemical Reaction Engineering & Catalysis, 10 (1: 98-103. (doi:10.9767/bcrec.10.1.7802.98-103Permalink/DOI: http://dx.doi.org/10.9767/bcrec.10.1.7802.98-103 

  9. Future coordinated researches by Argonne (USA), Tashkent (Uzbekistan) and Almaty (Kazakhstan) nuclear centres on the nuclear reactions and astrophysics

    International Nuclear Information System (INIS)

    Artemov, S.V.; Yarmukhamedov, R.; Yuldashev, B.S.; Burtebaev, N.; Kadyrzhanov, K.K.; Rehm, K.E.

    2004-01-01

    An actual problem of modern nuclear physics and astrophysics is realistic evaluation of astrophysical S-factors and rates of the nuclear reactions, which are responsible for the energy generation and nucleosynthesis in Universe. The essential progress in understanding of these processes has been made in the last decade. Those are the discovery of neutrino oscillations, obtaining new precise data on the reactions cross sections at rather low energies, development of methods of extrapolation to the stellar energy region. Nevertheless, the available experimental data close to stellar energies are very poor especially for unstable particles interactions, and uncertainties remain rather remarkable. It leads to large errors when measured data are extrapolated to astrophysical important super low energy region. The experimental possibilities for improvement the accuracy of the data using 'indirect' measurements are discussed. One of them is based on the peripheral character of charged particles interaction at low energy in which the asymptotical normalization coefficients (ANC) of overlapping functions are used for extrapolation. In this case the differential cross-section of the particle transfer reaction is expressed via the product of ANCs squares of participating particles. Their values may be obtained from the peripheral reactions at larger energies where the accuracy of measurement is higher. From this point of view the particle transfer A(x,y)B reactions are the most preferable, where (x,y) are ( 13 N, 12 C) or ( 17 F, 16 O) (proton transfer) and ( 13 C, 12 C) or ( 17 O, 16 O) (neutron transfer). We should know firstly the ANCs for 13 C→ 12 C+n ( 17 O→ 16 O+n) and 13 N→ 12 C+p ( 17 F→ 16 O+p) systems, and all other ANCs B→ A+p(n) are expressed through these values. The nucleon separation energies ε N are relatively small for these nuclei (ε 13N → 12C+p =1.943 MeV; ε 17F → 16O+p =0.6003 MeV; ε 13C → 12C+n =4.946 MeV and ε 17O → 16O+n =4.143 Me

  10. A Retrospective Analysis of Apheresis Donor Deferral and Adverse Reactions at a Tertiary Care Centre in India.

    Science.gov (United States)

    Arora, Disha; Garg, Ketan; Kaushik, Ankit; Sharma, Richa; Rawat, D S; Mandal, A K

    2016-11-01

    With increasing demand of platelet component each day, blood bank plays a pivotal role in ensuring supply of safe blood as and when required. Plateletpheresis procedure is a relatively simple, safe and important adjunct to blood bank inventory. However, recruitment of healthy blood donors is a challenge that the health industry is facing today. To determine the reasons and rates of apheresis donor deferral along with investigation of adverse reactions encountered during the procedure. Records of single donor apheresis were retrospectively analysed from 1 st January 2010 to 31 st December 2014. The study was carried out at Blood Bank, Safdarjung Hospital, New Delhi, India. The donor details that were studied included - age, sex, type of donation (voluntary/replacement/ repeat), reason for donor deferral and type of adverse reaction, if encountered during the procedure. Among the 478 donors screened for plateletpheresis procedure during a study period of 5 years, 134 (28.03%) were deferred. Temporary deferrals accounted for majority (93.28%) of the deferrals. Low platelet count (50.75%) was the main reason of donor deferral followed by low haemoglobin (20.89%). Amongst the 344 selected donors, 15 (4.36%) had some type of adverse reaction associated with the procedure. We suggest that the selection criteria for plateletpheresis donors should be revised to deal with shortage of apheresis donors. The criteria regarding minimum pre-procedure platelet count (above1.5 lac/μl) and haemoglobin (above 12.5 g/dl) need to be lowered so as to suit the Indian scenario. The lower adverse reaction rates, 14/344 (4.06%) associated with this procedure encourages safety of donors and is important in recruitment of new donors.

  11. Aza-crown ether complex cation ionic liquids: preparation and applications in organic reactions.

    Science.gov (United States)

    Song, Yingying; Cheng, Chen; Jing, Huanwang

    2014-09-26

    Aza-crown ether complex cation ionic liquids (aCECILs) were devised, fabricated, and characterized by using NMR spectroscopy, MS, thermogravimetric differential thermal analysis (TG-DTA), elemental analysis and physical properties. These new and room-temperature ILs were utilized as catalysts in various organic reactions, such as the cycloaddition reaction of CO2 to epoxides, esterification of acetic acid and alcohols, the condensation reaction of aniline and propylene carbonate, and Friedel-Crafts alkylation of indole with aldehydes were investigated carefully. In these reactions, the ionic liquid exhibited cooperative catalytic activity between the anion and cation. In addition, the aza-[18-C-6HK][HSO4]2 was the best acidic catalyst in the reactions of esterification and Friedel-Crafts alkylation under mild reaction conditions. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Preparation of a Strong Thin Polonium Source And Preliminary Experiments on the Yield of (α,n) Reactions

    International Nuclear Information System (INIS)

    Broda, E.

    1945-01-01

    This report was written by E. Broda and P. K. Wright at the Cavendish Laboratory (Cambridge) in July 1945 and is about the preparation of a strong thin polonium source and preliminary experiments on the yield of (alpha,n) reactions. This report includes the experiment description, the discussion of the results and consist of 4 parts: (1) the electrode position of polonium under different conditions (2) a standard procedure for preparation of strong thin Po sources (3) a simple method for the recovery of RaD from complex mixtures (4) some preliminary experiments with a Po source. (nowak)

  13. Preparation of Pt-SDB hydrophobic catalyst used in H2-H2O isotope exchange reaction

    International Nuclear Information System (INIS)

    Li Junhua; Kang Yi; Ruan Hao; Dou Qincheng; Han Yande; Hu Shilin

    2001-01-01

    The preparation of Pt-SDB hydrophobic catalyst is studied, in which platinum as active metal and polystyrene divinylbenzene (SDB) as the carrier. Hydrogen isotope exchange reaction is carried out with Pt-SDB catalyst in counter-current in the trickle bed. The effect of preparing condition on the activity of catalyst is discussed. The results show that the excellent catalyst is obtained by reduced at the temperature of 200 degree C over 8 hours. Hydrophobic catalyst is high activity and stability as the amount of platinum content is 3%, the platinum can reach the economic use with the content of (1-2)%

  14. Preparation of a Strong Thin Polonium Source And Preliminary Experiments on the Yield of (α,n) Reactions

    Energy Technology Data Exchange (ETDEWEB)

    Broda, E.

    1945-07-01

    This report was written by E. Broda and P. K. Wright at the Cavendish Laboratory (Cambridge) in July 1945 and is about the preparation of a strong thin polonium source and preliminary experiments on the yield of (alpha,n) reactions. This report includes the experiment description, the discussion of the results and consist of 4 parts: (1) the electrode position of polonium under different conditions (2) a standard procedure for preparation of strong thin Po sources (3) a simple method for the recovery of RaD from complex mixtures (4) some preliminary experiments with a Po source. (nowak)

  15. Increased expression of TACI on NOD B cells results in germinal centre reaction anomalies, enhanced plasma cell differentiation and immunoglobulin production.

    Science.gov (United States)

    Banday, Viqar S; Thyagarajan, Radha; Sundström, Mia; Lejon, Kristina

    2016-11-01

    B cells have an important pathogenic role in the development of type 1 diabetes in the non-obese diabetic (NOD) mouse. We have previously reported that NOD mice display an increased percentage of TACI high -expressing B cells compared with C57BL/6 mice and this trait is linked to chromosomes 1 and 8. In this paper the genetic association of the transmembrane activator, calcium modulator and cyclophilin ligand interactor (TACI) trait was confirmed using double congenic NOD.B6C1/Idd22 mice. TACI ligation by a proliferation-inducing ligand (APRIL) has been shown to influence plasma cell differentiation, immunoglobulin production and isotype switch. Hence, the functional consequence of the up-regulation of TACI on NOD B cells was analysed both in vitro and in vivo. NOD B cells stimulated with APRIL showed an enhanced plasma cell differentiation and class switch to IgG and IgA compared with B cells from C57BL/6 mice. Moreover, flow cytometry analyses revealed that germinal centre B cells in NOD failed to down-regulate TACI. Availability of the TACI ligand B-cell activating factor (BAFF) has been shown to be a limiting factor in the germinal centre reaction. In line with this, upon immunization with 4-hydroxy-3-nitrophenylacetyl hapten-conjugated hen egg lysozyme, NOD mice produced higher titres of low-affinity antibodies compared with C57BL/6 mice. This observation was supported by the detection of increased levels of BAFF in NOD germinal centres after immunization compared with C57BL/6 by immunofluorescence. Our results support the hypothesis that increased TACI expression on NOD B cells contributes to the pathogenesis of type 1 diabetes in the NOD mouse. © 2016 John Wiley & Sons Ltd.

  16. Multipulse spectroscopy on the wild-type and YM210W Bacterial Reaction Centre uncovers a new intermediate state in the special pair excited state

    Science.gov (United States)

    Cohen Stuart, T. A.; van Grondelle, R.

    2009-06-01

    The Bacterial Reaction Centre (BRC) has a complex electronic excited state, P ∗, that evolves into subsequent charge separated product states P +H - and P +B -. Pump-dump-probe spectroscopy on the wild-type BRC and on YM210W, a mutant with a stabilized, long-lived P ∗ excited state, has uncovered a new charge-separated state in both BRC's. When P ∗ is dumped, a fraction of its population is transferred to this state that has a strong Stark shift in the accessory bacteriochlorophyll (B M) region which serves as a signature for P + and a lifetime highly comparable to the slow phase of P ∗ decay. This lead us propose this intermediate to be P +/P -.

  17. Preparation of nano-aluminum and studies on thermo-reaction properties

    International Nuclear Information System (INIS)

    Wei Sheng; Wang Chaoyang; Huang Yong; Wu Weidong; Tang Yongjian; Wei Jianjun

    2002-01-01

    The author presents the fabrication of nano-aluminum powders by evaporation-condensation method. The thermo gravimetric-differential scanning calorimetry technique is used to characterize the thermo-reaction properties between nano-aluminum powders and N 2 or Ar. The experiment results confirm the different thermo-reaction properties between block- and nano-aluminum

  18. Parallel post-space preparation in different tooth types ex vivo : deviation from the canal centre and remaining dentine thickness

    NARCIS (Netherlands)

    Huysmans, M. C. D. N. J. M.; Klein, M. H. J.; Kok, G. F.; Whitworth, J. M.

    2007-01-01

    Aim To determine the deviation of parallel-sided twist-drills during post-channel preparation and relate this to tooth type and position. Methodology Human teeth with single root canals were selected: maxillary second premolars (group i); maxillary lateral incisors (group ii); mandibular canines

  19. Studying of Nano SiO2 Preparation from Rice Husk Ash by Using High Gravity Reaction Precipitation Technology

    International Nuclear Information System (INIS)

    Nguyen Thanh Chung; Tran Ngoc Ha; Hoang Van Duc

    2013-01-01

    A novel method (High-gravity reactive precipitation - HGRP) was developed to prepare nano-SiO 2 from rice husk ash using gas-liquid reaction system. The precipitated silica produced by our proposed method had average size of 20 nm with narrow size distribution and purity of SiO 2 was approximately 99.2%. The principles of the method as well as experimental conditions were also described. (author)

  20. Structures and reaction pathways of the molybdenum centres of sulfite-oxidizing enzymes by pulsed EPR spectroscopy.

    Science.gov (United States)

    Enemark, John H; Astashkin, Andrei V; Raitsimring, Arnold M

    2008-12-01

    SOEs (sulfite-oxidizing enzymes) are physiologically vital and occur in all forms of life. During the catalytic cycle, the five-co-ordinate square pyramidal oxo-molybdenum active site passes through the Mo(V) state, and intimate details of the structure can be obtained from variable frequency pulsed EPR spectroscopy through the hyperfine and nuclear quadrupole interactions of nearby magnetic nuclei. By employing variable spectrometer operational frequencies, it is possible to optimize the measurement conditions for difficult quadrupolar nuclei of interest (e.g. (17)O, (33)S, (35)Cl and (37)Cl) and to simplify the interpretation of the spectra. Isotopically labelled model Mo(V) compounds provide further insight into the electronic and geometric structures and chemical reactions of the enzymes. Recently, blocked forms of SOEs having co-ordinated sulfate, the reaction product, were detected using (33)S (I=3/2) labelling. This blocking of product release is a possible contributor to fatal human sulfite oxidase deficiency in young children.

  1. Influence of the external heating type in the morphological and structural characteristics of alumina powder prepared by combustion reaction

    International Nuclear Information System (INIS)

    Cordeiro, V.V.; Freitas, N.L.; Viana, K.M.S.; Dias, G.; Costa, A.C.F.M.; Lira, H.L.

    2009-01-01

    The aim of this work is to evaluate the influence of the external heating in the morphological and structural characteristics of the alumina powder prepared by combustion reaction. It was evaluated different types of external heating: muffle oven, microwave oven and ceramic plate with electrical spiral resistance. The powders were prepared according to the propellants and explosives theory, using urea in the stoichiometric proportion (Φe = 1). During the synthesis parameters such as flame combustion time and temperature were measured. The structural and morphological characteristics of the powders were evaluate by XRD, particle size distribution, SEM and nitrogen adsorption (BET). The results showed the production of a-alumina as unique phase and formed by agglomerates with irregular plate shape of thin particles for all studied conditions. The powders prepared by electrical oven presented small particle size, with narrow agglomerates size distribution. (author)

  2. Reaction

    African Journals Online (AJOL)

    abp

    19 oct. 2017 ... Reaction to Mohamed Said Nakhli et al. concerning the article: "When the axillary block remains the only alternative in a 5 year old child". .... Bertini L1, Savoia G, De Nicola A, Ivani G, Gravino E, Albani A et al ... 2010;7(2):101-.

  3. Radical-mediated annulation reactions. A versatile strategy for the preparation of a series of carbocycles.

    Science.gov (United States)

    Sibi, M P; Chen, J; Rheault, T R

    2001-11-15

    [reaction--see text] A series of novel 6-endo [4 + 2] and 7-endo [5 + 2] radical-mediated annulation reactions are described. These annulation sequences involve an intermolecular radical addition followed by intramolecular trapping with an allyltin moiety incorporated into the radical precursor fragment. This methodology allows for access to functionalized 6- and 7-membered carbocycles as well as bicyclic compounds with good to excellent levels of stereocontrol.

  4. Training practitioners in preparing systematic reviews: a cross-sectional survey of participants in the Australasian Cochrane Centre training program

    Directory of Open Access Journals (Sweden)

    Silagy Chris

    2002-06-01

    Full Text Available Abstract Background Although systematic reviews of health care interventions are an invaluable tool for health care providers and researchers, many potential authors never publish reviews. This study attempts to determine why some people with interest in performing systematic reviews do not subsequently publish a review; and what steps could possibly increase review completion. Methods Cross-sectional survey by email and facsimile of the 179 participants in Australasian Cochrane Centre training events between 1998 and 2000. Results Ninety-two participants responded to the survey (51 percent. Response rate of deliverable surveys was 82 percent (92/112. The remainder of the participants had invalid or no contact information on file. More than 75 percent of respondents felt that the current workshops met their needs for training. The most critical barriers to completion of a Cochrane review were: lack of time (80 percent, lack of financial support (36 percent, methodological problems (23 percent and problems with group dynamics (10 percent. Conclusions Strategies to protect reviewer time and increase the efficiency of the review process may increase the numbers of trained reviewers completing a systematic review.

  5. Preparation and characterization of PdxAgy/C electrocatalysts for ethanol electrooxidation reaction in alkaline media

    International Nuclear Information System (INIS)

    Li Guanglan; Jiang Luhua; Jiang Qian; Wang Suli; Sun Gongquan

    2011-01-01

    Highlights: · The effects of Pd or PdAg particle size and PdAg alloy degrees on the EOR activity are investigated. · The Pd lattice constant of the PdAg increases with increasing the Ag content. · The EOR activity of the PdAg/C presents a 'volcano' plot with increasing the Pd lattice constant. · The optimal Pd/Ag atomic ratio locates between 2/1 and 3/1. · The EOR activity of the PdAg/C increases with increasing the PdAg particle size from 3.4 to 5.2 nm. - Abstract: Carbon-supported bimetallic PdAg catalysts with Pd/Ag atomic ratios varying from 4/1 to 1/2 were prepared by an impregnation-reduction method. The impregnated black mixture was treated in H 2 /N 2 atmosphere at a temperature varying from 180 to 500 deg. C. The obtained Pd x Ag y /C catalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), cyclic voltammetry (CV) and chronoamperometry (CA). XRD results show that the lattice constant of Pd is dilated, suggesting the formation of PdAg alloy. The lattice constant of Pd for the Pd x Ag y /C-500 (reduced at 500 deg. C by H 2 ) increases linearly and the average metal particle size decreases slightly from 6.8 to 5.1 nm with increasing Ag fractions from 20% to 67% in the PdAg composition. For Pd x Ag y /C catalysts with a certain specific Pd/Ag atomic ratio, e.g., Pd 2 Ag 1 /C, the dilated lattice constant of Pd is independent of the reducing temperature, indicating the alloy degree for the Pd 2 Ag 1 /C-t catalysts is comparable. The average metal particle size for the Pd 2 Ag 1 /C-t catalysts increases from 3.4 to 5.2 nm with H 2 reduction temperature increasing from 180 to 500 deg. C. The potentiodynamic measurements on ethanol electrooxidation reaction (EOR) show that the catalytic activities for the Pd x Ag y /C-t catalysts toward the EOR are improved by alloying Pd with Ag. At typical potential of a working fuel cell, e.g., -0.4 V vs. Hg/HgO, the EOR current density presents a volcano shape as a function of the

  6. High luminescent L-cysteine capped CdTe quantum dots prepared at different reaction times

    Science.gov (United States)

    Kiprotich, Sharon; Onani, Martin O.; Dejene, Francis B.

    2018-04-01

    This paper reports a facile synthesis route of high luminescent L-cysteine capped CdTe quantum dots (QDs). The effect of reaction time on the growth mechanism, optical and physical properties of the CdTe QDs was investigated in order to find the suitability of them towards optical and medical applications. The representative high-resolution transmission microscopy (HRTEM) analysis showed that the as-obtained CdTe QDs appeared as spherical particles with excellent monodispersity. The images exhibited clear lattice fringes which are indicative of good crystallinity. The X-ray diffraction (XRD) pattern displayed polycrystalline nature of the QDs which correspond well to zinc blende phase of bulk CdTe. The crystallite sizes calculated from the Scherrer equation were less than 10 nm for different reaction times which were in close agreement with the values estimated from HRTEM. An increase in reaction time improved crystallinity of the sample as explained by highest peak intensity of the XRD supported by the photoluminescence emission spectra which showed high intensity at a longer growth time. It was observed that for prolonged growth time the emission bands were red shifted from about 517-557 nm for 5-180 min of reaction time due to increase in particle sizes. Ultraviolet and visible analysis displayed well-resolved absorption bands which were red shifted upon an increase in reaction time. There was an inverse relation between the band gap and reaction time. Optical band gap decreases from 3.98 to 2.59 eV with the increase in reaction time from 15 to 180 min.

  7. One-pot reaction for the preparation of biofunctionalized self-assembled monolayers on gold surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Raigoza, Annette F.; Fies, Whitney; Lim, Amber; Onyirioha, Kristeen; Webb, Lauren J., E-mail: lwebb@cm.utexas.edu

    2017-02-01

    Highlights: • One-pot synthesis of α-helical-terminated self-assembled monolayers on Au(111). • Synthesis of high density, structured, and covalently bound α-helices on Au(111). • Characterization by surface-averaged and single molecule techniques. • Peptide-terminated surfaces for fabrication of biomaterials and sensors. - Abstract: The Huisgen cycloaddition reaction (“click” chemistry) has been used extensively to functionalize surfaces with macromolecules in a straightforward manner. We have previously developed a procedure using the copper(I)-catalyzed click reaction to tether synthetic α-helical peptides carrying two alkyne groups to a well-ordered azide-terminated alkanethiol self-assembled monolayer (SAM) on a Au(111) surface. While convenient, click-based strategies potentially pose significant problems from reagents, solvents, and reaction temperatures that may irreversibly damage some molecules or substrates. Tuning click chemistry conditions would allow individual optimization of reaction conditions for a wide variety of biomolecules and substrate materials. Here, we explore the utility of simultaneous SAM formation and peptide-attachment chemistry in a one-pot reaction. We demonstrate that a formerly multistep reaction can be successfully carried out concurrently by mixing azide-terminated alkanethiols, CuCl, and a propargylglycine-containing peptide over a bare gold surface in ethanol and reacting at 70 °C. X-ray photoelectron spectroscopy (XPS), surface infrared spectroscopy, surface circular dichroic (CD) spectroscopy, and scanning tunneling microscopy (STM) were used to determine that this one-pot reaction strategy resulted in a high density of surface-bound α-helices without aggregation. This work demonstrates the simplicity and versatility of a SAM-plus-click chemistry strategy for functionalizing Au surfaces with structured biomolecules.

  8. Al-Si/Al2O3 in situ composite prepared by displacement reaction of CuO/Al system

    Directory of Open Access Journals (Sweden)

    Zhang Jing

    2010-02-01

    Full Text Available Al2O3 particle-reinforced ZL109 composite was prepared by in situ reaction between CuO and Al. The microstructure was observed by means of OM, SEM and TEM. The Al2O3 particles in sub-micron sizes distribute uniformly in the matrix, and the Cu displaced from the in situ reaction forms net-like alloy phases with other alloy elements. The hardness and the tensile strength of the composites at room temperature have a slight increase as compared to that of the matrix. However, the tensile strength at 350 ℃ has reached 90.23 MPa, or 16.92 MPa higher than that of the matrix. The mechanism of the reaction in the CuO/Al system was studied by using of differential scanning calorimetry(DSC and thermodynamic calculation. The reaction between CuO and Al involves two steps. First, CuO reacts with Al to form Cu2O and Al2O3 at the melting temperature of the matrix alloy, and second, Cu2O reacts with Al to form Cu and Al2O3 at a higher temperature. At ZL109 casting temperature of 750–780 ℃, the second step can also take place because of the effect of exothermic reaction of the first step.

  9. Client Centred Desing

    DEFF Research Database (Denmark)

    Ørngreen, Rikke; Nielsen, Janni; Levinsen, Karin

    2008-01-01

    In this paper we argue for the use of Client Centred preparation phases when designing complex systems. Through Client Centred Design human computer interaction can extend the focus on end-users to alse encompass the client's needs, context and resources....

  10. 13-year overview of serious adverse drug reactions following subcutaneous specific immunotherapy with a chemically modified allergen preparation.

    Science.gov (United States)

    Distler, Andreas; Pappelendam, Debbie

    The Paul-Ehrlich-Institut (PEI) published an analysis of reports of adverse drug reactions (ADRs) in 2001 with test and therapy allergens from the period from 1991 to 2000. Possible risk factors were evaluated for the ADR reports classified as "serious". During the analyzed period, modified semi-depot preparations (allergoids) induced between 0.01 % and 0.0005 % serious systemic reactions, i. e. one serious ADR occurred in 10,000 to 200,000 injections. No information was provided regarding the respective incidences in relation to the individual companies or preparations. Within the scope of a 13-year analysis (2001-2013), the serious ADRs were analysed at HAL for the allergoid preparations PURETHAL® Pollen and Mites. As in the analysis of PEI, the frequency of serious ADRs was based on the estimated number of administered injections. A total of 46 cases with serious ADRs were received. In 26 % of the cases, a serious ADR occurred during initial treatment after the first injection. In 82.6 % of the cases, the serious ADR occurred within the 30-minute observation period in the practice. Adrenaline was administered as emergency treatment in seven cases. Hospitalisations were initiated by the treating physician or by patients themselves in 45 cases. The duration of the hospital stay varied from a few hours up to three days for further monitoring. Serious ADRs occurred in 11 cases with mites and in 35 cases with pollen. If it is assumed that there are six injections in each vial, this yields an incidence of 0.00061 % (1 : 164,000). The frequency with mites (0.00093 %) was slightly higher than with pollen (0.00055 %). The allergoid preparations (pollen and mite allergens) showed a very low risk of serious ADRs, which was close to the lower level of incidence of 0.0005 % for allergoid preparations published by the PEI.

  11. Alteration in sample preparation to increase the yield of multiplex Polymerase Chain Reaction assay for diagnosis of genital ulcer disease

    Directory of Open Access Journals (Sweden)

    G Rao

    2013-01-01

    Full Text Available Purpose: Genital Ulcer Disease (GUD is common sexually transmitted infection (STI. Multiple studies have shown that GUDs are strongly associated with the transmission and the acquisition of HIV infection. An accurate diagnosis of common etiology of GUD namely Herpes, syphilis and Chancroid is possible using Multiplex PCR (M-PCR. However, frequent presence of Polymerase Chain Reaction inhibitors in the ulcer swab specimen limits the performance of the assay. In order to overcome this problem, alternative specimen preparation method was used. Materials and Methods: To determine the common etiology, GUD specimens obtained under an STI operations research study were tested with M-PCR after the samples were prepared using Roche Amplicor specimen preparation kit. PCR inhibiting samples were identified from that, which showed negative results. These samples were subjected to phenol-chloroform extraction and ethanol precipitation before the conduct of M-PCR on them. Results: Of the 237 GUD specimens tested, in 145 etiologies could be detected, whereas 92 samples were found negative. Further spiking with one of the target DNA, 128 of the negative samples were found to contain the inhibitors. These 126 samples were then subjected to phenol chloroform extraction and ethanol precipitation followed by M-PCR. Using this method for sample preparation, etiology could be determined in 46 (23% additional samples. This success rate of altered sample preparation method has been lower than that has reported. Conclusion: The results indicate that sample preparation using phenol chloroform extraction and ethanol precipitation, prior to M-PCR helps to eliminate the inhibitors and increase the yield of the assay. However, being a laborious procedure, it may be used for samples giving negative results after the screening by Roche Amplicor specimen preparation kit.

  12. Catalytic Activity of Urchin-like Ni nanoparticles Prepared by Solvothermal Method for Hydrogen Evolution Reaction in Alkaline Solution

    International Nuclear Information System (INIS)

    Abbas, Syed Asad; Iqbal, Muhammad Ibrahim; Kim, Seong-Hoon; Jung, Kwang-Deog

    2017-01-01

    Highlights: • Urchin-like Ni is prepared in solvothermal reaction. • Urchin-like Ni is formed via Ni(OH) 2 aggregates in ethanol and oleylamine. • Exchange current density of urchin-like Ni is 0.191 mA cm −2 . • Urchin-like Ni exceeds the catalytic performance of commercial Pt/C in HER. - Abstract: Ni nanoparticles with different morphologies were synthesized for hydrogen evolution reaction (HER) in alkaline solution. Here, Ni(acac) 2 was converted into Ni metal nanoparticles in solvothermal reactions with simple alcohols and oleylamine (OAm). The morphology of the resulting Ni nanoparticles was dependent mainly on the OAm/Ni molar ratio in alcohol solvent. Aggregates of spherical Ni nanoparticles (NiEt-OAm1) were observed at the OAm/Ni molar ratio of 1.0, whereas two echinoid Ni nanoparticles (NiEt-OAm4 and NiEt-OAm6) could be prepared in ethanol at the OAm/Ni molar ratios of 4.0 and 6.0. Ni(OH) 2 formed in ethanol during a reaction time of 5 h was then reduced into echinoid Ni nanoparticles after 8 h. Echinoid Ni nanoparticles were formed by atomic addition on the tops of the multipod Ni particles formed via Ni(OH) 2 /NiO aggregates. Webbed feet-like particles (NiIPA-OAm4) with plate edges were also observed in isopropanol under the same reaction conditions. The catalytic activities of the prepared Ni nanoparticles for the hydrogen evolution reaction were evaluated in alkaline solution. The NiEt-OAm4 with urchin-like morphology was much more active than the NiIPA-OAm4 with webbed feet-like morphology. The exchange current density of Ni catalysts was increased with increasing the OAm/Ni molar ratio. The NiEt-OAm6 exhibited an exchange current of 0.191 mA cm −2 and the NiEt-OAm4 exceeded electrocatalytic performance of a commercial Pt catalysts (40% Pt on Vulcan XC 72) in a stability test for 100 kiloseconds at −1.5 V (vs. Hg/HgO) in 1.0 M NaOH due to its high stability.

  13. Preparation of Metallic and Polymer Nanoparticles, Responsive Nanogels and Nanofibers by Radiation Initiated Reactions

    Energy Technology Data Exchange (ETDEWEB)

    Lee, K. -Pill; Gopalan, A. I. [Department of Chemistry Education, Kyungpook National University (Korea, Republic of)

    2009-07-01

    Synthesis of nanomaterials have become the focus of intensive research due to their numerous applications in diverse fields such as electronics, optics, ceramics, metallurgy, pulp and paper, environmental, pharmaceutics, biotechnology and biomedical fields. Due to expanding demand for the nanomaterials with defined properties, extensive research activities have been focused on the synthesis and characterization of “functional nanomaterials”. Our research group launched into research activities on the preparation of varieties of functional materials using radiation as the source for inducing functionalities ino these new nanomaterials. Importantly, we kept final goals for specific applications. Thus, we have prepared few interesting functional nanomaterials such as metal nanoparticles decorated multi wall carbon nanotubes, pore filled functional electrospun nanofibers and nanocables based on conducting polymer and carbon nanotubes and demonstrated their applications toward electrocatalysts, polymer electrolyte in energy devices and biosensors. In the forthcoming sections, a brief outline on the use of radiation for the preparation of those functional nanomaterials are presented. (author)

  14. Hydrotreating NiMo/sepiolite catalysts: influence of catalyst preparation on activity for HDS, hydrogenation and chain isomerization reactions

    International Nuclear Information System (INIS)

    Melo, F.V.; Sanz, E.; Corma, A.; Mifsud, A.

    1987-01-01

    A series of NiMo catalysts supported on a sepiolite: a) in its natural state, b) modified by acid leaching, and c) modified by cation exchange, have been prepared. The preparation variables studied were: Method of metal deposition, amount of active phase, sepiolite pretreatment, and temperature and time of sulfurization. The catalytic activity for HDS, hydrogenation, and cracking-isomerization has been studied by feeding a thiophene-cyclohexene-cyclohexane mixture and carrying out the reaction in the following conditions: 300 0 and 400 0 C reaction temperature, 20 Kg.cm -2 total pressure, and 3 to 1 molar ratio of H 2 to hydrocarbons. An optimium for HDS and hydrogenation activity was found for a 12% wt MoO 3 , and 5% wt NiO, prepared by simultaneous impregnation by the pore volume method at Ph = 5.0. The optimum conditions with these catalysts are 400 0 C and 3 hours of sulfurization. An increase in the acidity of the support produces a decrease of HDS and hydrogenation and an increase of the cracking-isomerization activities. A good correlation between HDS and the concentration of an XNiO.MoO 3 phase is found. The XNiO.MoO 3 phase is completely sulfurized to a modified MoS 2 , while NiMoO 4 and MoO 3 are only slightly sulfurized. 31 refs.; 7 figs.; 1 table

  15. Preparation of short cytosine-modified oligonucleotides by nicking enzyme amplification reaction

    Czech Academy of Sciences Publication Activity Database

    Ménová, Petra; Hocek, Michal

    2012-01-01

    Roč. 48, č. 55 (2012), s. 6921-6923 ISSN 1359-7345 R&D Projects: GA ČR GA203/09/0317 Institutional support: RVO:61388963 Keywords : cross - coupling reactions * nucleoside triphosphates * functionalized DNA * restriction endonucleases * polymerase incorporation Subject RIV: CC - Organic Chemistry Impact factor: 6.378, year: 2012

  16. Comparative study of the various methods of preparation of silicate solution and its effect on the geopolymerization reaction

    Directory of Open Access Journals (Sweden)

    N. Essaidi

    Full Text Available This paper is based on the characterization of synthesized geopolymer binders based on either powder or solution silicate, and the amount of water contained in synthesized binders is determined to evaluate their possibility to coat a brick. The structural evolution of the formed geopolymers was investigated using FTIR spectroscopy. The mechanical properties were evaluated using compression tests. The structural evolution ensured that the solutions prepared from silicate powder or liquid had different degrees of polymerization, which modified the polycondensation reaction of the mixture. Nevertheless, the use of aluminosilicate solutions based on powder or liquid display similar behavior in a polycondensation reaction. The obtained materials show good mechanical properties, and it is possible to deposit this binder on the brick depending on the water content. Keywords: Silicate powder, Bricks, Alkaline solution, Binders, Depolymerization, Metakaolin reactivity

  17. Preparation of the vulcan XC-72R-supported Pt nanoparticles for the hydrogen evolution reaction in PEM water electrolysers

    International Nuclear Information System (INIS)

    Nguyen, Huy Du; Nguyen, T Thuy Luyen; Nguyen, Khac Manh; Ha, Thuc Huy; Nguyen, Quoc Hien

    2015-01-01

    Pt nanoparticles on vulcan XC-72R support (Pt/vulcan XC-72R) were prepared by the impregnation–reduction method. The Pt content, the morphological properties and the electrochemical catalysis of the Pt/vulcan XC 72R materials have been investigated by ICP-OES analysis, FESEM, TEM, and cyclic voltammetry. These materials were then used as catalyst for hydrogen evolution reaction at the cathode of proton exchange membrane (PEM) water electrolysers. The best catalyst was Pt/vulcan XC-72R prepared by the impregnation–reduction method which is conducted in two reducing steps with the reductants of sodium borohydride and ethylene glycol, respectively. The current density of PEM water electrolysers reached 1.0 A cm"−"2 when applying a voltage of 2.0 V at 25 °C. (paper)

  18. Preparation and Characterization of Pd Modified TiO2 Nanofiber Catalyst for Carbon–Carbon Coupling Heck Reaction

    Directory of Open Access Journals (Sweden)

    Leah O. Nyangasi

    2017-01-01

    Full Text Available TiO2 fibers were prepared through electrospinning of poly methyl methacrylate (PMMA and titanium isopropoxide (TIP solution followed by calcination of fibers in air at 500°C. Cetyltrimethylammonium bromide (CTAB protected palladium nanoparticles (Pd NPs prepared through reduction method were successfully adsorbed on the TiO2 nanofibers (NF. Combined studies of X-ray diffraction (XRD, scanning electron microscope (SEM, and transmission electron microscope (TEM indicated that the synthesized Pd/TiO2 had anatase. BET indicated that the synthesized TiO2 and Pd/TiO2 had a surface area of 53.4 and 43.4 m2/g, respectively. The activity and selectivity of 1 mol% Pd/TiO2 in the Heck reaction have been investigated towards the Mizoroki-Heck carbon–carbon cross-coupling of bromobenzene (ArBr and styrene. Temperature, time, solvent, and base were optimized and catalyst was recycled thrice. 1H NMR and 13C NMR indicated that stilbene, a known compound from literature, was obtained in various Heck reactions at temperatures between 100°C and 140°C but the recyclability was limited due to some palladium leaching and catalyst poisoning which probably arose from some residual carbon from the polymer. The catalyst was found to be highly active under air atmosphere with reaction temperatures up to 140°C. Optimized reaction condition resulted in 89.7% conversions with a TON of 1993.4 and TOF value of 332.2 hr−1.

  19. New azo coupling reactions for visible spectrophotometric determination of salbutamol in bulk and pharmaceutical preparations

    International Nuclear Information System (INIS)

    Dhahir, S. A.

    2011-01-01

    The purpose of the present study was to develop a new, simple, cheap, fast, accurate, and sensitive colorimetric methods that can be used for the determination of salbutamol sulphate drug in pure from as well as in pharmaceutical formulations. The method is based on the reaction 2-chloro-4-nitroaniline with nitrite in acid medium to form diazonium ion, which is coupled with of salbutamol in basic medium to form azo dyes, showing yellow color and absorption maxima at 463 nm. Beer's law is obeyed in the concentration of 4-48μg/ml. The molar absorptivity and san dell's sensitivity are 5.27x103 L mole-1 cm-1, 0.015 μgcm-2, respectively. The optimum reaction conditions and other analytical parameters were evaluated. (author).

  20. Structural and morphological characterization of TiO2 powders prepared using Pechini and combustion reaction

    International Nuclear Information System (INIS)

    Ribeiro, P.C.; Almeida, E.P.; Costa, A.C.F.M. da; Lira, H.L.; Kiminami, R.H.G.A.

    2010-01-01

    TiO 2 is a semiconductor oxide and polymorphic and can exist in three crystallographic forms: anatase, rutile and broquita, and forms anatase and rutile are the major interests in scientific research. Thus, this study aims to synthesize TiO 2 by Pechini methods and combustion reaction and to evaluate the influence of synthesis methods in structural and morphological characteristics of the samples. The nanopowders were characterized by X-ray diffraction, nitrogen adsorption, and particle size distribution and scanning electron microscopy. The results of X-ray diffraction showed that the samples obtained by the Pechini method showed the single phase anatase with crystallite size of 20 nm and surface area of 49.44 m 2 /g, whereas the samples synthesized by combustion reaction using glycine as fuel showed the rutile phase as major phase and traces of anatase phase, with crystallite size of 65 nm and surface area 4.34 m 2 /g. (author)

  1. THE KINETICS OF THE REACTIONS CATALYZED BY AN ENZYMATIC PREPARATION PRODUCED BY A BACILLUS LICHENIFORMIS STRAIN

    Directory of Open Access Journals (Sweden)

    MONICA DRAGOMIRESCU

    2007-05-01

    Full Text Available Robust immobilization techniques that preserve the activity of biomolecules have manypotential applications. In recent years, a number of new bioimobilisation methods in solgel-derived materials were reported. The interactions between the biomolecule and theinorganic material determine the degree to which the biomolecule retains its nativeproperties. The newer technological developments in the field of immobilizedbiocatalysts can offer the possibility of a wider and more economical exploitation ofbiocatalysts in biological applications, food and feed industry, medicine, and in thedevelopment of bioprocess monitoring devices, like the biosensors.The aim of this study was to obtain immobilized enzymatic preparations by methodswhich affect enzyme conformations and kinetic parameters as less as possible. Weimmobilized the enzymatic preparation with protease activity produced by a Bacilluslicheniformis B 40 local strain by physical bonding on ceramics and entrapment into solgel-derived glasses obtained from tetraethyl orthosilicate (TEOS, deposited in thin layeron a ceramic support (entrapment/deposition. Both physically adsorbed andentrapped/deposited enzymes follow Michaelis-Menten kinetics, similar with the solubleenzyme. In the case of immobilized enzymes, the apparent Michaelis constant, Km, wasgreater than that of the native one, as it was expected. The kinetic parameters indicatethat the enzymatic preparations adsorbed on ceramic support and entrapped/depositedshow less affinity for the substrate, Km being 1.3 and 2.1 times higher than that of thenative enzyme, respectively. The maximum velocity increased also by 3.5 and 7.9 timesrespectively, compared with the free counterpart (according to Lineweaver-Burklinearization.

  2. Preparation of ionic-crosslinked chitosan-based gel beads and effect of reaction conditions on drug release behaviors.

    Science.gov (United States)

    Chen, Shilan; Liu, Mingzhu; Jin, Shuping; Wang, Bin

    2008-02-12

    Drug-loaded chitosan (CS) beads were prepared under simple and mild condition using trisodium citrate as ionic crosslinker. The beads were further coated with poly(methacrylic acid) (PMAA) by dipping the beads in PMAA aqueous solution. The surface and cross-section morphology of these beads were observed by scanning electron microscopy and the observation showed that the coating beads had core-shell structure. In vitro release of model drug from these beads obtained under different reaction conditions was investigated in buffer medium (pH 1.8). The results showed that the rapid drug release was restrained by PMAA coating and the optimum conditions for preparing CS-based drug-loaded beads were decided through the effect of reaction conditions on the drug release behaviors. In addition, the drug release mechanism of CS-based drug-loaded beads was analyzed by Peppa's potential equation. According to this study, the ionic-crosslinked CS beads coated by PMAA could serve as suitable candidate for drug site-specific carrier in stomach.

  3. Electrical and Dielectric Properties of Polyaniline and Polyaniline/Montmorillonite Nanocomposite Prepared by Solid Reaction Using Spectroscopy Impedance

    Directory of Open Access Journals (Sweden)

    Imene Bekri-Abbes

    2015-01-01

    Full Text Available The combination of two components with uniform distribution in nanoscale is expected to facilitate wider applications of the material. In this study, polyaniline (PAn and polyaniline/montmorillonite (Mt nanocomposite were prepared by solid reaction using persulfate of ammonium as oxidant. The phase composition and morphology of the nanocomposite were characterized by FTIR, UV-visible spectroscopy, X-ray diffractometer, thermal gravimetric analysis, and scanning electron microscopy. The electrical and dielectric properties were determined using spectroscopy impedance. The analysis of UV-visible and FTIR spectroscopy demonstrated that aniline chloride has been polymerized into PAn in its conducting emeraldine form. Thermogravimetric analysis suggested that PAn chains intercalated in the clay host are more thermally stable than those of free PAn prepared by solid-solid reaction. Electrical measurements were carried out using the complex impedance technique in the frequency range of 10−2 to 104 Hz at different temperatures. The ac conductivity data of different nanocomposites were analyzed as a function of frequency and temperature. It has been found that the incorporation of inorganic clay phase into polyaniline matrix has an effect on the electrical and dielectric properties of the nanomaterial.

  4. Preparation of new biobased coatings from a triglycidyl eugenol derivative through thiol-epoxy click reaction

    OpenAIRE

    Guzman, Dailyn; Ramis Juan, Xavier; Fernández Francos, Xavier; de la Flor1 López, Sílvia; Serra Albet, Àngels

    2018-01-01

    © 2017 Elsevier B.V. A new triglycidyl eugenol derivative (3EPO-EU) was synthesized and characterized by spectroscopic techniques, and used as starting monomer in the preparation of novel bio-based thiol-epoxy thermosets. As thiols, commercially available tetrathiol derived from pentaerythritol (PETMP), a trithiol derived from eugenol (3SH-EU) and the hexathiol derived from squalene (6SH-SQ) were used in the presence of 4-(N,N-dimethylamino)pyridine as the basic catalyst. A flexible diglycidy...

  5. New Diazo Coupling Reactions for Visible Spectrophotometric Determination of Alfuzosin in Pharmaceutical Preparations

    Directory of Open Access Journals (Sweden)

    M. Vamsi Krishna

    2007-01-01

    Full Text Available Simple, rapid and sensitive spectrophotometric procedures were developed for the analysis of Alfuzosin hydrochloride (AFZ in pure form as well as in pharmaceutical formulations. The methods are based on the reaction of AFZ with nitrite in acid medium to form diazonium ion, which is coupled with ethoxyethylenemaleic ester (Method A or ethylcyanoacetate (Method B or acetyl acetone (method C in basic medium to form azo dyes, showing absorption maxima at 440, 465 and 490 nm respectively. Beer’s law is obeyed in the concentration of 4-20 μg/mL of AFZ for methods A, B and 3-15 μg/mL of AFZ for method C. The molar absorptivity and sandell’s sensitivity of AFZ- ethoxyethylenemaleic ester, AFZ- ethylcyanoacetate and AFZ-acetyl acetone are1.90 × 104, 0.022; 1.93 × 104, 0.021 and 2.67 × 104 L mole-1 cm-1, 0.015 μg cm-2 respectively. The optimum reaction conditions and other analytical parameters were evaluated. The methods were successfully applied to the determination of AFZ in pharmaceutical formulations.

  6. Preparation of AgBr Nanoparticles in Microemulsions Via Reaction of AgNO3 with CTAB Counterion

    International Nuclear Information System (INIS)

    Husein, Maen M.; Rodil, Eva; Vera, Juan H.

    2007-01-01

    Nanoparticles of AgBr were prepared by precipitating AgBr in the water pools of microemulsions consisting of CTAB, n-butanol, isooctane and water. An aqueous solution of AgNO 3 added to the microemulsion was the source of Ag + ions. The formation of AgBr nanoparticles in microemulsions through direct reaction with the surfactant counterion is a novel approach aimed at decreasing the role of intermicellar nucleation on nanoparticle formation for rapid reactions. The availability of the surfactant counterion in every reverse micelle and the rapidity of the reaction with the counterion trigger nucleation within individual reverse micelles. The effect of the following variables on the particle size and size distribution was investigated: the surfactant and cosurfactant concentrations, moles of AgNO 3 added, and water to surfactant mole ratio, R. High concentration of the surfactant or cosurfactant, or high water content of the microemulsion favored intermicellar nucleation and resulted in the formation of large particles with broad size distribution, while high amounts of AgNO 3 favored nucleation within individual micelles and resulted in small nanoparticles with narrow size distribution. A blue shift in the UV absorption threshold corresponding to a decrease in the particle size was generally observed. Notably, the variation of the absorption peak size with the nanoparticle size was opposite to those reported by us in previous studies using different surfactants

  7. Microspheres Prepared by Internal Gelation - Understanding of HMTA and urea reactions

    International Nuclear Information System (INIS)

    Robisson, A.C.; Dauby, J.; Grandjean, S.; Benay, G.; Modolo, G.

    2008-01-01

    Homogenous microspheres of minor actinide (hereafter MA) compounds are of interest to prevent the generation and dispersal of MA powder at the early stages of the fabrication of targets for homogenous or heterogeneous transmutation. Sol-gel routes are being investigated as one of the possible solutions for producing these homogeneous starting materials. This document describes internal gelation basis experiments led at Cea Marcoule and at the Institute for Energy Research Juelich dedicated to the synthesis of mixed compounds including MAs, particularly mixed actinide-actinide or mixed actinide-inert element compounds. Parameter studies were undertaken by simulating cations in order to scan a larger range of conditions and to optimise more easily gelation conditions. With these experiments, key parameters were put forward and the main successive reactions taking care during gelation were understood. (authors)

  8. Preparation of CdS nanoparticels with spin-coating assisted successive ionic layer reaction and their photoelectrochemical properties

    Directory of Open Access Journals (Sweden)

    Bao SUN

    2017-10-01

    Full Text Available In order to settle the problems in the traditional SILAR method for CdS deposition, such as smaller particles and being difficult to enhance the sensitive layers, an improved spin-coating assisted successive ionic layer reaction method (S-SILR substituted for the traditional SILAR method is used to deposit the CdS nanocrystals. The comparison between the improved and traditional methods is studied after depositing the CdS nanocrystals onto the ZnO nanorod arrays with the two approaches. Different analysis methods, SEM, XRD, UV-vis and the transit photocurrent measurement are conducted to characterize the morphologies and structures of the samples, as well as investigating the light absorption properties, and the photoelectric conversion performance of the electrodes. The results indicate that the CdS nanocrystals photosensitive layers could be totally coated onto the ZnO nanorod arrays more easily by the improved S-SILR method; the light absorption properties and the photoelectric conversion performance of the electrodes prepared by the improved S-SILR method are more excellent compared with those electrodes prepared by the traditional SILAR method. The improvement of the CdS deposition method has certain guiding significance in enhancing the operability of the preparation technology and the photovoltaic performance of the solar cells.

  9. Nanostructured amorphous MnO{sub 2} prepared by reaction of KMnO{sub 4} with triethanolamine

    Energy Technology Data Exchange (ETDEWEB)

    Yang Yanjing [Key Laboratory of Environmentally Friendly Chemistry and Applications of Ministry of Education, College of Chemistry, Xiangtan University, Xiangtan, Hunan 411105 (China); Liu Enhui, E-mail: liuenhui99@sina.com.c [Key Laboratory of Environmentally Friendly Chemistry and Applications of Ministry of Education, College of Chemistry, Xiangtan University, Xiangtan, Hunan 411105 (China); Li Limin; Huang Zhengzheng; Shen Haijie; Xiang Xiaoxia [Key Laboratory of Environmentally Friendly Chemistry and Applications of Ministry of Education, College of Chemistry, Xiangtan University, Xiangtan, Hunan 411105 (China)

    2010-09-03

    Amorphous manganese dioxide is prepared by reaction of potassium permanganate with an organic reductant triethanolamine. The effect of heat-treatment temperature is studied on the characteristics of the materials. Power X-ray diffraction (XRD), scanning electron microscope (SEM) and N{sub 2} adsorption and desorption measurements are employed to investigate crystalline structure, surface morphology, the specific surface area and the pore size distribution. It is found that when the annealing temperature reaches up to 400 {sup o}C, the crystalline convert to {alpha}-MnO{sub 2} from amorphous MnO{sub 2}. The electrochemical characteristics of the prepared MnO{sub 2} powder are characterized by means of cyclic voltammetry (CV), experiments in 1.0 mol L{sup -1} Na{sub 2}SO{sub 4} electrolyte. The specific capacitance (SC) value is 251 F g{sup -1} that is obtained from the product annealing at 350 {sup o}C at a CV scan rate of 2 mV s{sup -1}. And charging-discharging measurement reveals the good stability of the prepared material.

  10. Scalable preparation of sized-controlled Co-N-C electrocatalyst for efficient oxygen reduction reaction

    Science.gov (United States)

    Ai, Kelong; Li, Zelun; Cui, Xiaoqiang

    2017-11-01

    Heat-treated metal-nitrogen-carbon (M-N-C) materials are emerging as promising non-precious catalysts to replace expensive Pt-based materials for oxygen reduction reaction (ORR) in energy conversion and storage devices. Despite recent progress, their activity and durability are still far from satisfactory. The activity site and particle size are among the most important factors for the ORR activity of M-N-C catalysts. Extensive efforts have been made to reveal the correlation of active site and activity. However, it remains unclear to what extent the particle size will influence the ORR activity of M-N-C materials. Moreover, to the best of our knowledge, controllable synthesis of M-N-C catalysts with high-density activity sites remains elusive. Herein, we develop a straightforward method to produce a monodisperse and size-controlled Co-N-C (Nano-P-ZIF-67) electrocatalyst, and systemically investigate its catalytic mechanisms. Only by optimizing the particle size, Nano-P-ZIF-67 outperforms the commercial 20 wt% Pt/C regarding all evaluating indicators for ORR catalysts in alkaline media including higher catalytic activity, durability, and stronger methanol tolerance. Nano-P-ZIF-67 is assembled into a cell, and the cell shows a power density of 45.5 mW/cm2, which is the highest value among currently studied cathode catalysts. We expect Nano-P-ZIF-67 to be a highly interesting candidate for the next generation of ORR catalysts.

  11. Ordered mesoporous silica prepared by quiescent interfacial growth method - effects of reaction chemistry

    Science.gov (United States)

    2013-01-01

    Acidic interfacial growth can provide a number of industrially important mesoporous silica morphologies including fibers, spheres, and other rich shapes. Studying the reaction chemistry under quiescent (no mixing) conditions is important for understanding and for the production of the desired shapes. The focus of this work is to understand the effect of a number of previously untested conditions: acid type (HCl, HNO3, and H2SO4), acid content, silica precursor type (TBOS and TEOS), and surfactant type (CTAB, Tween 20, and Tween 80) on the shape and structure of products formed under quiescent two-phase interfacial configuration. Results show that the quiescent growth is typically slow due to the absence of mixing. The whole process of product formation and pore structuring becomes limited by the slow interfacial diffusion of silica source. TBOS-CTAB-HCl was the typical combination to produce fibers with high order in the interfacial region. The use of other acids (HNO3 and H2SO4), a less hydrophobic silica source (TEOS), and/or a neutral surfactant (Tweens) facilitate diffusion and homogenous supply of silica source into the bulk phase and give spheres and gyroids with low mesoporous order. The results suggest two distinct regions for silica growth (interfacial region and bulk region) in which the rate of solvent evaporation and local concentration affect the speed and dimension of growth. A combined mechanism for the interfacial bulk growth of mesoporous silica under quiescent conditions is proposed. PMID:24237719

  12. Fragrance patch tests prepared in advance may give false-negative reactions.

    Science.gov (United States)

    Mowitz, Martin; Svedman, Cecilia; Zimerson, Erik; Bruze, Magnus

    2014-11-01

    Several of the ingredients in fragrance mix I (FM I) have been shown to evaporate from petrolatum preparations applied in test chambers to an extent that can be suspected to affect the patch test result. To compare the reactivity towards FM I and fragrance mix II (FM II) when they are applied in test chambers in advance and immediately prior to the patch test occasion. Seven hundred and ninety-five consecutive patients were simultaneously patch tested with duplicate samples of FM I and FM II. One sample was applied in the test chamber 6 days in advance (6D sample), and the other sample was applied immediately before the patients were patch tested (fresh sample). Twenty-two (2.8%) patients reacted exclusively to the fresh sample of FM I, 6 (0.7%) reacted exclusively to the 6D sample, and 22 (2.8%) reacted to both samples. The corresponding numbers for FM II were 9 (1.1%) for the fresh sample, 6 (0.7%) for the 6D sample and 12 (1.5%) for both samples. There was a statistically significant difference between the numbers of patients reacting to the fresh and 6D samples of FM I. No corresponding difference was observed for FM II. This can probably be explained by differences in volatilities between the ingredients of FM I and FM II. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  13. Synthesis and characterization of ZnGa2O4 particles prepared by solid state reaction

    International Nuclear Information System (INIS)

    Can, Musa Mutlu; Hassnain Jaffari, G.; Aksoy, Seda; Shah, S. Ismat; Fırat, Tezer

    2013-01-01

    Highlights: ► Synthesis of ZnGa 2 O 4 particles produced from metallic Zn and Ga particles. ► The structural comparison of spinel and partially inverse spinel structure in ZnGa 2 O 4 . ► The Ga atoms occupied 13% of tetrahedral site in ZnGa 2 O 4 . ► The band gap, calculated from climate point of UV–visible, was found as 4.6 ± 0.1 eV. ► The optical analyses were shown defective ZnO structure in ZnGa 2 O 4 . - Abstract: We employed solid state reaction technique to synthesize ZnGa 2 O 4 particles, produced in steps of mixing/milling the ingredients in H 2 O following thermal treating under 1200 °C. We compare spinel and partially inverse spinel structure in ZnGa 2 O 4 particles using Rietveld refinement. Crystal structure of ZnGa 2 O 4 particles was identified with two structural phases; normal spinel structure and partially inverse spinel structure using Rietveld refinement. It is found that the partially inverse spinel structures occupy nearly 13% and the rest is normal spinel structure. The obtained X-ray diffraction data show that lattice constant and the position of Oxygen atoms remain almost constant in both structures. The characterization of the particles was also improved using X-ray photoelectron spectroscopy and Fourier transforms infrared spectroscopy measurements. The optical analyses were done with UV–visible spectroscopy. The band gap, calculated from climate point of UV–visible data, was found as 4.6 ± 0.1 eV. Despite no unexpected compound (such as ZnO and Ga 2 O 3 ) in the structure, the optical analyses were shown defective ZnO structure in ZnGa 2 O 4 .

  14. Preparation of Nb3Ge films by chemical transport reaction and their critical properties

    International Nuclear Information System (INIS)

    Oya, G.; Saur, E.J.

    1979-01-01

    Niobium-germanium films have been deposited on sapphire substrates at 900 0 C by a chemical transport reaction method. The highest superconducting transition onset temperature T/sub C,on/ of 22.4K is observed for a nearly stoichiometric Nb 3 Ge film with the A15-type structure (thickness approx.93.5 μm). Lattice constants for the Nb 3 Ge phase formed in the Nb-Ge films with both T/sub C,on/ above 22 K and T/sub C,midpoint/ above 21 K are found to extend from 5.143 to 5.153 A. Deposition rates for the obtained films are in the range of 2-10 μm/min. Critical current densities for the Nb 3 Ge film with the highest T/sub C,on/ value are observed to be relatively low (approx.10 3 A/cm 2 at 19 K at self-field). This is due to the coarse grain structure of the film or the low density of effectual pinning centers in the film. Field variations of the pinning forces operating in this film in magnetic fields both parallel to the film surface and perpendicular to the film surface are found to follow closely b/sup 1/2/ (1-b) 2 , to which the pinning force for flux pinning at the surface of normal regions, such as grain boundaries, film surfaces, etc., is proportional, and where b is the reduced magnetic induction (B/B/sub C2/). A small increase in J/sub C/ at low fields is caused by the presence of a small amount of the Nb 5 Ge 3 phase in a Nb 3 Ge film, and seems attributable to additional flux pinning on Nb 5 Ge 3 -phase particles in the film

  15. Design and preparation of novel polyarylene ether materials based on Diels-Alder reaction as the crosslinker for electrooptical modulators

    Science.gov (United States)

    Gao, Wu; Hou, Wenjun; Zhen, Zhen; Liu, Xinhou; Liu, Jialei; Fedorchuk, A. A.; Czaja, P.

    2016-07-01

    Novel crosslinkable organic linear electro-optical (EO) material based on polyarylene ether as the main chain host polymer was designed and prepared. The host polymer with rigid aromatic has demonstrated a good compatibility with the guest chromophore. Long side chain with anthracene ensured the crosslinkable reaction and appropriate glass transition temperature of the host polymer (55 °C). The EO r33 tensor coefficient for this novel EO material has been magnitude of 66 pm/V at 1310 nm and the excellent long term stability at 85 °C. These parameters permit to consider their application in fabrication of organic electro optical devices. The semi-empirical and DFT quantum chemical simulations were performed for 4 principal chromophores to clarify a role of cross-linker in the enhancement of the ground state dipole moments and effective hyperpolarizabilities.

  16. Multiwalled carbon nanotubes@octavinyl polyhedral oligomeric silsesquioxanes nanocomposite preparation via cross-linking reaction in acidic media

    Energy Technology Data Exchange (ETDEWEB)

    Somasekharan, Lakshmipriya; Thomas, Sabu [Mahatma Gandhi University, International and Interuniversity Centre for Nanoscience and Nanotechnology (India); Comoy, Corinne [Université de Lorraine, SRSMC, UMR 7565 (France); Sivasankarapillai, Anilkumar [NSS Hindu College (India); Kalarikkal, Nandakumar [Mahatma Gandhi University, International and Interuniversity Centre for Nanoscience and Nanotechnology (India); Lamouroux, Emmanuel, E-mail: Emmanuel.Lamouroux@univ-lorraine.fr [Université de Lorraine, SRSMC, UMR 7565 (France)

    2016-11-15

    Multiwalled carbon nanotubes have unique properties allowing their use in a wide range of applications—from microelectronics to biomedical and polymer fields. Nevertheless, a crucial aspect for their use resides in the ease of handling them during the process. Here, we report a facile route to prepare multiwalled carbon nanotubes@octavinyl polyhedral oligomeric silsesquioxanes (MWCNT@POSS) nanocomposite. The method involves the formation of a covalent bond between carboxylated MWCNTs and OV-POSS using acid-catalyzed electrophilic addition reaction. The resulting nanocomposite have been characterized by Fourier transform infrared spectroscopy (FTIR), powder X-Ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The results confirmed that the formation of MWCNT@POSS nanocomposite did not deteriorate MWCNT structure or morphology. Here, we used a 1:1 ratio of carboxylated MWCNTs and OV-POSS and the POSS content in the nanocomposite was 39.5 wt%.

  17. Facile approach to prepare pH and redox-responsive nanogels via Diels-Alder click reaction

    Directory of Open Access Journals (Sweden)

    C. M. Q. Le

    2018-08-01

    Full Text Available A novel pH and redox responsive system of sub-100 nm nanogels was prepared by arm-first approach via Diels-Alder click reaction. First, well-defined poly(ethylene glycol-block-poly(styrene-alt-maleic anhydride (PEG-b-PSM was synthesized and subsequently functionalized with furfuryl amine, leading to the formation of the dual-functional block copolymer of PEG-b-PSMf. The furfuryl groups in the PSMf block were employed to incorporate a redox-responsive linkage and the carboxylic acid moieties generated through functionalization acted as a pH-responsive part. The Diels-Alder click reaction between a bismaleimide crosslinker and PEG-b-PSMf was conducted at 60 °C, affording star-like nanogel structures. Doxorubicin, a model anticancer drug, was loaded into to the core of the nanogels primarily by the ionic interaction with carboxylates of core blocks and a highest drug loading capacity of 38.1% was obtained. Furthermore, the in vitro profile showed a low release percentage (11.2% of DOX at PBS pH 7.4, whereas a burst release (62% at pH 5.0 in the presence of 10 mM glutathione, indicating the effective pH and redox responsive characteristic of the PEG-b-PSMf nanogels.

  18. Characterization and emulsifying properties of β-lactoglobulin-gum Acacia Seyal conjugates prepared via the Maillard reaction.

    Science.gov (United States)

    Bi, Binwei; Yang, Hao; Fang, Yapeng; Nishinari, Katsuyoshi; Phillips, Glyn O

    2017-01-01

    Gum Acacia Seyal (ASY) is less valued than is gum Acacia Senegal, due to its poor emulsifying ability. The present study investigated the Maillard reaction between ASY and β-lactoglobulin (BLG) and its impact on the emulsifying properties of ASY. The reaction products of BLG/ASY mixture (r=1/4), prepared by dry-heating at 60°C and a relative humidity of 79%, as a function of incubation time, were characterized by SDS-PAGE, GPC-MALLS and DSC. The results showed that 12-24h of dry-heating under the given conditions was sufficient for conjugation, meanwhile avoiding the formation of deeply coloured and insoluble melanoidins. More than 64% of the protein was incorporated into ASY, resulting in a two-fold increase in arabinogalactan-protein (AGP) content and 3.5 times increase in weight-average molecular mass of ASY. The conjugation with BLG markedly improved the stability of ASY-stabilized emulsions and their resistance against severe conditions, such as low pH and high saline conditions. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Interfacial reactions between humic-like substances and lateritic clay: application to the preparation of "geomimetic" materials.

    Science.gov (United States)

    Goure-Doubi, Herve; Martias, Céline; Lecomte-Nana, Gisèle Laure; Nait-Ali, Benoît; Smith, Agnès; Thune, Elsa; Villandier, Nicolas; Gloaguen, Vincent; Soubrand, Marilyne; Konan, Léon koffi

    2014-11-15

    The aim of this study was to understand the mechanisms responsible for the strengthening of "geomimetic" materials, especially the chemical bonding between clay and humic substances. The mineral matter is lateritic clay which mainly consists in kaolinite, goethite, hematite and quartz. The other starting products are fulvic acid (FA) and lime. The preparation of these geomimetic materials is inspired from the natural stabilization of soils by humic substances occurring over thousands of years. The present process involves acidic and alkaline reactions followed by a curing period of 18days at 60°C under a water saturated atmosphere. The acceleration of the strengthening process usually observed in soils makes this an original process for treatment of soils. The consolidation of the "geomimetic" materials could result from two major phenomena: (i) chemical bonding at the interface between the clay particles and iron compounds and the functional groups of the fulvic acid, (ii) a partial dissolution of the clay grains followed by the precipitation of the cementitious phases, namely calcium silicate hydrates, calcium aluminate hydrates and mixed calcium silicum and aluminum hydrates. Indeed, the decrease of the BET specific area of the lateritic clay after 24 h of reaction with FA added to the structural reorganization observed between 900 and 1000°C in the "geomimetic" material, and to the results of adsorption measurements, confirm the formation of organo-ferric complexes. The presence of iron oxides in clay, in the form of goethite, appears to be another parameter in favor of a ligand exchange process and the creation of binding bridges between FA and the mineral matter. Indeed all faces of goethite are likely to be involved in complexation reactions whereas in lateritic clay only lateral faces could be involved. The results of the adsorption experiments realized at a local scale will improve our understandings about the process of adsorption of FA on lateritic

  20. Mesoporous N-doped carbons prepared with thermally removable nanoparticle templates: an efficient electrocatalyst for oxygen reduction reaction.

    Science.gov (United States)

    Niu, Wenhan; Li, Ligui; Liu, Xiaojun; Wang, Nan; Liu, Ji; Zhou, Weijia; Tang, Zhenghua; Chen, Shaowei

    2015-04-29

    Thermally removable nanoparticle templates were used for the fabrication of self-supported N-doped mesoporous carbons with a trace amount of Fe (Fe-N/C). Experimentally Fe-N/C was prepared by pyrolysis of poly(2-fluoroaniline) (P2FANI) containing a number of FeO(OH) nanorods that were prepared by a one-pot hydrothermal synthesis and homogeneously distributed within the polymer matrix. The FeO(OH) nanocrystals acted as rigid templates to prevent the collapse of P2FANI during the carbonization process, where a mesoporous skeleton was formed with a medium surface area of about 400 m(2)/g. Subsequent thermal treatments at elevated temperatures led to the decomposition and evaporation of the FeO(OH) nanocrystals and the formation of mesoporous carbons with the surface area markedly enhanced to 934.8 m(2)/g. Electrochemical measurements revealed that the resulting mesoporous carbons exhibited apparent electrocatalytic activity for oxygen reduction reactions (ORR), and the one prepared at 800 °C (Fe-N/C-800) was the best among the series, with a more positive onset potential (+0.98 V vs RHE), higher diffusion-limited current, higher selectivity (number of electron transfer n > 3.95 at +0.75 V vs RHE), much higher stability, and stronger tolerance against methanol crossover than commercial Pt/C catalysts in a 0.1 M KOH solution. The remarkable ORR performance was attributed to the high surface area and sufficient exposure of electrocatalytically active sites that arose primarily from N-doped carbons with minor contributions from Fe-containing species.

  1. Electro catalyst of platinum prepared by CVD for the oxygen reduction reaction; Electrocatalizador de platino preparado por CVD para la reaccion de reduccion de oxigeno

    Energy Technology Data Exchange (ETDEWEB)

    Garcia C, M.A.; Fernandez V, S.M. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico); Vargas G, J.R. [IPN, ESIQIE, 07300 Mexico D.F. (Mexico)

    2004-07-01

    In this work it is reported the preparation and characterization of platinum films obtained by the technique of chemical vapor deposition at low pressure, better well-known as LPCVD for their initials in English (Low Pressure Chemical Vapor Deposition). The technique has several industrial applications and in this work it is explored their possible use to prepare applicable electrocatalysts in fuel cells. The films were characterized by XRD, SEM, EDS and they were proven for to determine their acting in the Oxygen reduction reaction (Orr) in sulfuric acid 0.5 M, the results show that the material presents good activity for the reaction in study. (Author)

  2. Electrocatalysts with platinum, cobalt and nickel preparations by mechanical alloyed and CVD for the reaction of oxygen reduction

    International Nuclear Information System (INIS)

    Garcia C, M. A.

    2008-01-01

    In this research, the molecular oxygen reduction reaction (ORR) was investigated on electrocatalysts of Co, Ni, Pt and their alloys CoNi, PtCo, PtNi and PtCoNi by using H 2 SO 4 0.5 and KOH 0.5 M solutions as electrolytes. The electrocatalysts were synthesized by Mechanical Alloying (MA) and Chemical Vapor Deposition (CVD) processes. For MA, metallic powders were processed during 20 h of milling in a high energy SPEX 8000 mill. For CVD, a hot-wall reactor was utilized and Co, Ni and Pt acetilactetonates were used as precursors. Films were deposited at a total pressure of 1 torr and temperatures of 400-450 C. Electrocatalysts were characterized by X-Ray Diffraction (XRD). Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Energy Dispersive X-Ray Spectroscopy (EDS). Electrocatalysts prepared by mechanical alloying showed a homogeneously dispersed agglomeration of particles with nano metric size. Electrocatalysts obtained by CVD showed, in some cases, non uniform films, with particles of nano metric size, as well. The electrocatalytic performance was evaluated by using the Rotating Disk Electrode technique (RDE). Electrocatalysts prepared by MA showed higher activity than those obtained by CVD. All electrocatalysts were evaluated in alkaline media. Only electrocatalysts containing Pt were evaluated in acid media, because those materials with Co, Ni and their alloys showed instability in acidic media. Most electrocatalysts followed a mechanism for the ORR producing a certain proportion of H 2 O 2 . All electrocatalysts, exhibited a fair or good electrocatalytic activity in comparison with other similar reported materials. It was found that MA and CVD are appropriate processes to prepare electrocatalysts for the ORR with particles of nano metric size and performing with an acceptable catalytic activity. PtCoNi 70-23-7% by MA and PtCoNi-CVD electrocatalysts showed the highest activity in alkaline media, while in acidic electrolyte PtCoNi 70

  3. Manche centre

    International Nuclear Information System (INIS)

    1997-05-01

    After a general presentation of radioactivity and radioactive wastes and of the French national agency for the management of radioactive wastes (ANDRA), this brochure gives a general overview of the Manche low- and medium-level radioactive waste disposal centre: principles of storage safety, waste containers (first confinement barrier), storage facility and cover (second confinement barrier), the underground (third confinement barrier), the impact of the centre on its environment, and the control of radioactivity in the vicinity of the centre. (J.S.)

  4. Enhancing Ductility of 1045 Nanoeutectic Steel Prepared by Aluminothermic Reaction through Annealing at 873 K

    Directory of Open Access Journals (Sweden)

    Zhengning Li

    2017-01-01

    Full Text Available The 1045 steel with lamellar spacing of pearlite in nanometer was prepared by aluminothermic reaction casting and annealed at 873 K (600°C with different time. Microstructures of steels were investigated by X-ray diffraction (XRD, scanning electron microscope (SEM, and transmission electron microscope (TEM. Tensile properties of the steels were measured. The results showed that the lamellar spacing of the pearlite increased with the annealing time. It was found that the microstructure of steels consisted of nanocrystalline-ferrite matrix and laminar pearlite phase. The average grain sizes of the ferrite were 26.9, 27.0, 26.1, and 34.9 nm for the cast steel and samples annealed for 2, 4, and 6 h, respectively. As the annealing time increased, the volume fraction of the pearlite almost remained constant, while the laminar spacing of pearlite increased from 146 to 300 nm. The tensile and yield strength varied slightly; the elongation obviously improved. After annealing for 4 h, the elongation increased to be 33%, which was the reported highest value for the steel up to now and about twice of the conventional 1045 steel.

  5. Reactivity of main components and substituent distribution in esterified sugarcane bagasse prepared by effective solid phase reaction.

    Science.gov (United States)

    Gan, Tao; Zhang, Yanjuan; Chen, Yane; Hu, Huayu; Yang, Mei; Huang, Zuqiang; Chen, Dong; Huang, Aimin

    2018-02-01

    Three main components of lignocellulose (cellulose, hemicellulose, and lignin isolated from sugarcane bagasse (SCB)) as well as holocellulose and SCB were modified with maleic acid by mechanical activation (MA)-assisted solid phase reaction (MASPR) technology. The order of reactivity was found to be lignin>hemicellulose>cellulose. The amorphous structure of lignin and hemicellulose mainly attributed to their better reactivity, and the modified lignin could reach a maximum degree of esterification (DE) of 93.45%. MA improved the accessibility and reactivity of cellulose, as the DE of modified cellulose gradually increased with milling time and reached the maximum value of 57.30% at 120min, which had significant effect on structure changes and DE of modified holocellulose and SCB. MA enhanced the esterification of all three components in lignocellulose with relatively high substituent distribution in them, and maleated SCB with a maximum DE of 64.17% was successfully prepared by this simple, green, and effective MASPR technology. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. ELECTRICAL RESISTIVITY AND SEEBECK COEFFICIENT IN Ca(LaMnO COMPOUNDS PREPARED BY SOLID STATE REACTION METHOD

    Directory of Open Access Journals (Sweden)

    Jorge I. Villa

    2017-01-01

    Full Text Available By using the solid state reaction method samples of  Ca1-xLaxMnO3 (0 ≤ x ≥ 0.15 were prepared. Their transport properties were studied by electrical resistivity rho(T and Seebeck coefficient S(T measurements as a function of temperature and lanthanum content, in the temperature range between 100 and 290K. The structural and morphological properties were studied by X-ray diffraction analysis (XRD and scanning electron microscopy (SEM, respectively. The Seebeck coefficient is negative throughout the studied temperature range indicating a conduction given by negative charge carriers, its magnitude decreases with the lanthanum content from |-261| mV/K to |-120| mV/K. The electrical resistivity shows a semiconducting behavior, it was interpreted in terms of small polaron hopping model. Thermoelectric properties of the obtained compounds were studied by the thermoelectric power factor PF, which reaches maximum values around 2mW/K2cm, these values become this kind of ceramics promising thermoelectric compound, to be used in technological applications.

  7. Preparation of 64Cu based on nuclear reaction of 64Ni (p,n) 64Cu: Simulations of target preparation and radionuclidic separation

    International Nuclear Information System (INIS)

    Sunarhadijoso Soenarjo; Wira Y Rahman; Sriyono; Triyanto

    2010-01-01

    As a preliminary study for production technology of 64 Cu based on nuclear reaction of 64 Ni (p,n) 64 Cu, the nickel targets were prepared by electroplating method using acidic solution of nickel chloride - boric acid and basic solution of nickel sulphate - nickel chloride mixtures on a silver-surfaced target holder. The simulated solution of Ni(II) - Cu(II) matrix was considered as the solution of post-proton-irradiated nickel containing radioactive copper. In the presented work the irradiation of nickel target was omitted, while the radioactive copper was obtained from neutron irradiation of CuO target. The separation of radioactive copper was based on anion exchange column chromatography in which the radiocopper was conditioned to form CuCl 4 2- anion complex, while the nickel was kept as Ni 2+ cation. It was found that the electroplating deposit from the acidic solution was better than that form the basic solution. By conditioning the matrix solution in 6 M HCl, the radioactive copper was indicated in the forms of Cu 2+ and CuCl 4 2- while the nickel was in the form of Ni 2+ . In the condition of 9 M HCl, the radioactive copper was in the form of CuCl 4 2- , while the nickel was found as both Ni 2+ and CuCl 4 2- . The best condition of separation was in 8 M HCl in which the radioactive copper was in the form of CuCl 4 2- , while the nickel was in the form of Ni 2+ . The retained CuCl 4 2- was then changed back into Cu 2+ cation and eluted out from the column by using 0.05 M HCl. The γ-spectrometric analysis showed a single strong peak at 511 keV in accordance to γ-annihilation peak coming from positron decay of 64 Cu, and a very weak peak at 1346 keV related to γ-ray from internal energy transition of 64 Cu. (author)

  8. Preparation of a gel of zirconium molybdate for use in the generators of 99 Mo - 99m Tc prepared with 99 Mo produced by the 98 Mo(n,γ)99 Mo reaction

    International Nuclear Information System (INIS)

    Osso Junior, Joao A.; Lima, Ana Lucia V.P.; Silva, Nestor C. da; Nieto, Renata C.; Velosa, Adriana C. de

    1998-01-01

    IPEN develops a project concerning the preparation of a gel of Zirconium Molybdate for use in the generators of 99 Mo- 99m Tc . 99m Tc is the most used radioisotope in nuclear medicine diagnosis procedures and nowadays the generators are being prepared with imported 99 Mo, produced by 235 U fission. The production of 99 Mo by the 98 Mo(n, γ) 99 Mo reaction is now possible because of the power upgrade of IPEN's IEA-R1 reactor, from 2 to 5 MW. This work describes the preparation method of Zirconium Molybdate gel that will be used in the 99 Mo- 99m Tc generators. The gel is prepared by the chemical reaction between Mo, in Mo O 3 form, and Zr, in Zr O Cl 2 .8H 2 O form. After the reaction, the gel is filtered, dried and cracked with saline solution. The product is then loaded into glass columns for use as 99m Tc generator. The results showed the good quality of the gel prepared at laboratory level and of the generators evaluated. (author)

  9. Integration of Computational and Preparative Techniques to Demonstrate Physical Organic Concepts in Synthetic Organic Chemistry: An Example Using Diels-Alder Reaction

    Science.gov (United States)

    Palmer, David R. J.

    2004-01-01

    The Diels-Alder reaction is used as an example for showing the integration of computational and preparative techniques, which help in demonstrating the physical organic concepts in synthetic organic chemistry. These experiments show that the students should not accept the computational results without questioning them and in many Diels-Alder…

  10. Investigation into reaction of heterogenous isotopic exchange with gaseoUs tritium in solution for preparation labelled lipid compounds

    International Nuclear Information System (INIS)

    Shevchenko, V.P.; Myasoedov, N.F.

    1983-01-01

    The applicability of the method of heterogeneous catalytic isotopic exchange with gaseous tritium in the solution for the production of labelled lipide preparations is studied. Labelled saturated and unsaturated aliphatic acids, prostaglandins, phospholipides and sphingolipides are prepared

  11. Study of the preparation of Cu-TiC composites by reaction of soluble Ti and ball-milled carbon coating TiC

    Science.gov (United States)

    Xu, Xuexia; Li, Wenbin; Wang, Yong; Dong, Guozhen; Jing, Shangqian; Wang, Qing; Feng, Yanting; Fan, Xiaoliang; Ding, Haimin

    2018-06-01

    In this work, Cu-TiC composites have been successfully prepared by reaction of soluble Ti and carbon coating TiC. Firstly, the ball milling of graphite and TiC mixtures is used to obtain the carbon coating TiC which has fine size and improved reaction activity. After adding the ball milled carbon coating TiC into Cu-Ti melts, the soluble Ti will easily react with the carbon coating to form TiC. This process will also improve the wettability between Cu melts and TiC core. As a result, besides the TiC prepared by reaction of soluble Ti and carbon coating, the ball milled TiC will also be brought into the melts. Some of these ball-milled TiC particles will go on being coated by the formed TiC from the reaction of Ti and the coating carbon and left behind in the composites. However, most of TiC core will be further reacted with the excessive Ti and be transformed into the newly formed TiC with different stoichiometry. The results indicate that it is a feasible method to synthesize TiC in Cu melts by reaction of soluble Ti and ball-milled carbon coating TiC.

  12. Preliminary studies towards the preparation of reactive 3-pyrrolin-2-ones in conjugate addition reactions for the syntheses of potentially bioactive 2-pyrrolidinones and pyrrolidines

    International Nuclear Information System (INIS)

    Alves, Jose C.F.

    2007-01-01

    Pyrrolin-2-ones and 2-pyrrolidinones are moieties often found in the structure of several biologically active natural products and 3-pyrrolin-2-ones are valuable starting materials in organic synthesis due to their ability to react as acceptors in conjugate addition reactions. In this article we report the initial results about the performed study aiming at the syntheses of reactive 3-pyrrolin-2-ones in conjugate addition reactions and the preparation of a potential precursor for the synthesis of the nootropic (+/-)-nebracetam. (author)

  13. Thermal aromatic Claisen rearrangement and Strecker reaction of alkyl(allyl-aryl ethers under green reaction conditions: Efficient and clean preparation of ortho-allyl phenols (naphthols and alkyl(allyloxyarene-based γ-amino nitriles

    Directory of Open Access Journals (Sweden)

    Kheila N. Silgado-Gómez

    2017-11-01

    Full Text Available Chemical transformations of 13 diverse allyl(alkyl-aryl ethers, easily prepared using Williamson reaction of different hydroxyarenes and allyl bromide and alkyl (n-butyl, n-octyl bromides, were studied. Thermal aromatic Claisen rearrangement of allyl-aryl ethers to obtain ortho-allyl phenols (naphthols employing propylene carbonate as a nontoxic and biodegradable solvent was described for the first time. The use of this green solvent allowed to enhance notably product yields and reduce significantly the reaction time comparing with the use of 1,2-dichlorobenzene, toxic solvent, which is traditionally employed in this type of Claisen rearrangement. Three-component Strecker reaction of selected alkyl(allyl-aryl ethers with formyl function on aryl fragment and, piperidine and potassium cyanide in the presence of sulfuric acid supported on silica gel (SSA, SiO2-O-SO3H under mild reaction conditions was used in the preparation of new γ-amino nitriles, analogues of alkaloid girgensohnine [2-(4-hydroxyphenyl-2-(piperidin-1-ylacetonitrile], a perspective biological model in the search for new insecticidal agrochemicals against Aedes aegypti. The use of SSA, an inexpensive and reusable solid catalyst, allowed to obtain new series of 2-[4-alkyl(allyloxyphenyl]-2-(piperidin-1-ylacetonitriles in short time at room temperature with good yields.

  14. Nano-sized Li4Ti5O12 anode material with excellent performance prepared by solid state reaction: The effect of precursor size and morphology

    International Nuclear Information System (INIS)

    Li, Xiangru; Hu, Hao; Huang, Sheng; Yu, Gaige; Gao, Lin; Liu, Haowen; Yu, Ying

    2013-01-01

    Graphical abstract: - Highlights: • Nano-sized Li 4 Ti 5 O 12 has been prepared through solid state reaction by using axiolitic TiO 2 as precursor. • The prepared nano-sized Li 4 Ti 5 O 12 anode material shows excellent electrochemical performance. • The utilization of precursor with special morphology and size is one of the useful ways to prepare more active electrode materials. - Abstract: Spinel nano-sized Li 4 Ti 5 O 12 anode material of secondary lithium-ion battery has been successfully prepared by solid state reaction using axiolitic TiO 2 assembled by 10–20 nm nanoparticles and Li 2 CO 3 as precursors. The synthesis condition, grain size effect and corresponding electrochemical performance of the special Li 4 Ti 5 O 12 have been studied in comparison with those of the normal Li 4 Ti 5 O 12 originated from commercial TiO 2 . We also propose the mechanism that using the nano-scaled TiO 2 with special structure and unexcess Li 2 CO 3 as precursors can synthesize pure phase nano-sized Li 4 Ti 5 O 12 at 800 °C through solid state reaction. The prepared nano-sized Li 4 Ti 5 O 12 anode material for Li-ion batteries shows excellent capacity performance with rate capacity of 174.2, 164.0, 157.4, 146.4 and 129.6 mA h g −1 at 0.5, 1, 2, 5 and 10 C, respectively, and capacity retention of 95.1% after 100 cycles at 1 C. In addition, the specific capacity fade for the cell with the different Li 4 Ti 5 O 12 active materials resulted from the increase of internal resistance after 100 cycles is compared

  15. Preparation of Low Molecular Weight Heparin by Microwave Discharge Electrodeless Lamp/TiO2 Photo-Catalytic Reaction.

    Science.gov (United States)

    Lee, Do-Jin; Kim, Byung Hoon; Kim, Sun-Jae; Kim, Jung-Sik; Lee, Heon; Jung, Sang-Chul

    2015-01-01

    An MDEL/TiO2 photo-catalyst hybrid system was applied, for the first time, for the production of low molecular weight heparin. The molecular weight of produed heparin decreased with increasing microwave intensity and treatment time. The abscission of the chemical bonds between the constituents of heparin by photo-catalytic reaction did not alter the characteristics of heparin. Formation of by-products due to side reaction was not observed. It is suggested that heparin was depolymerized by active oxygen radicals produced during the MDEL/TiO2 photo-chemical reaction.

  16. Sonic and microwaves assisted redox reactions of the hydrolysates of protein for the preparation of rechargeable battery

    International Nuclear Information System (INIS)

    Hussain, Z.; Khatak, K.; Sardar, A.

    2016-01-01

    Long recharging time is one of the serious limitations of batteries. One of the best solutions for quick redox reactions via the use of microwave and sound-assisted reversible redox reaction is presented in this work. A wireless charged prototype battery based on the redox reactions of hydrolyzed waste protein was designed. The effect of experimental conditions like time of charging, nature of media and strength of the acid on the voltage of this prototype battery was investigated. The experimental data was explained on the basis of the previous work on protein peptides and amino acids by various workers. (author)

  17. Being prepared to verify the CTBT-Atmospheric Transport modeling and radionuclide analysis at the Austrian National Data Centre during the NDC Preparedness Exercise 2009

    Science.gov (United States)

    Wotawa, Gerhard; Schraick, Irene

    2010-05-01

    An explosion in the Kara-Zhyra mine in Eastern Kazakhstan on 28 November 2009 around 07:20 UTC was recorded by both the CTBTO seismic and infrasound networks. This event triggered a world-wide preparedness exercise among the CTBTO National Data Centres. Within an hour after the event was selected by the German NDC, a computer program developed by NDC Austria based on weather forecasts from the European Centre for Medium-Range Weather Forecasts (ECMWF) and from the U.S. National Centers for Environmental Prediction (NCEP) was started to analyse what Radionuclide Stations of the CTBTO International Monitoring System (IMS) would be potentially affected by the release from a nuclear explosion at this place in the course of the following 3-10 days. These calculations were daily updated to consider the observed state of the atmosphere instead of the predicted one. Based on these calculations, automated and reviewed radionuclide reports from the potentially affected stations as produced by the CTBTO International Data Centre (IDC) were looked at. An additional analysis of interesting spectra was provided by the Seibersdorf Laboratories. Based on all the results coming in, no evidence whatsoever was found that the explosion in Kazakhstan was nuclear. This is in accordance with ground truth information saying that the event was caused by the detonation of more than 53 Tons of explosives as part of mining operations. A number of conclusions can be drawn from this exercise. First, the international, bilateral as well as national mechanisms and procedures in place for such an event worked smoothly. Second, the products and services from the CTBTO IDC proved to be very useful to assist the member states in their verification efforts. Last but not least, issues with the availability of data from IMS radionuclide stations do remain.

  18. Triheterometallic Lanthanide Complexes Prepared from Kinetically Inert Lanthanide Building Blocks

    DEFF Research Database (Denmark)

    Sørensen, Thomas Just; Tropiano, Manuel; Kenwright, Alan M.

    2017-01-01

    Three molecular structures, each containing three different lanthanide(III) centres, have been prepared by coupling three kinetically inert lanthanide(III) complexes in an Ugi reaction. These 2 kDa molecules were purified by dialysis and characterised by NMR and luminescence techniques. The photo...... and lanthanide(III) centres in these molecules inhibits the efficient sensitisation of europium. We conclude that the intramolecular collisions required for efficient Dexter energy transfer from the sensitiser to the lanthanide(III) centre can be prevented by steric congestion....

  19. Dielectric properties, impedance analysis and modulus behavior of CaTiO{sub 3} ceramic prepared by solid state reaction

    Energy Technology Data Exchange (ETDEWEB)

    Wong, Y.J., E-mail: yjeng_86@hotmail.com [Department of Physics, Faculty of Science, Universiti Putra Malaysia, 43400 Serdang, Selangor (Malaysia); Hassan, J., E-mail: jumiah@science.upm.edu.my [Department of Physics, Faculty of Science, Universiti Putra Malaysia, 43400 Serdang, Selangor (Malaysia); Advanced Materials and Nanotechnology Laboratory, Institute of Advanced Technology (ITMA), Universiti Putra Malaysia, 43400 Serdang, Selangor (Malaysia); Hashim, M., E-mail: mansor@science.upm.edu.my [Department of Physics, Faculty of Science, Universiti Putra Malaysia, 43400 Serdang, Selangor (Malaysia); Advanced Materials and Nanotechnology Laboratory, Institute of Advanced Technology (ITMA), Universiti Putra Malaysia, 43400 Serdang, Selangor (Malaysia)

    2013-09-15

    Highlights: •A single phase orthorhombic CaTiO{sub 3} structure with sub-micron grains is produced. •The frequency exponent ‘s’ is temperature dependent and explained by CBH model. •The dielectric constant and loss tangent are frequency and temperature dependent. •The modulus plot reveals the presence of thermally activated dielectric relaxation. •Cole-cole plot reveals two primary relaxation processes exist in the sample. -- Abstract: Calcium titanate (CaTiO{sub 3}) with the general formula for perovskites, ABO{sub 3}, is of technological importance, particularly with regard to dielectric properties. In this work, CaTiO{sub 3} ceramic material was prepared by the conventional solid state reaction method. The dielectric properties, impedance characteristics and modulus behavior of the CaTiO{sub 3} ceramic material sintered at 1240 °C were investigated in the frequency range of 10{sup −2}–10{sup 6} Hz and temperature range of 100–250 °C. The XRD analysis of the sintered CaTiO{sub 3} shows that it is an orthorhombic structure with lattice parameters a = 5.4398 Å, b = 7.6417 Å, and c = 5.3830 Å. The FESEM micrograph shows a significant difference in grain size distribution ranging from 0.26 to 2.32 μm. The AC conductivity, σ{sub AC}, is found to increase with increasing temperature within the frequency range of 10{sup −2}–10{sup 6} Hz confirming the hopping of electrons to be the conduction mechanism. Due to the decreasing values of the frequency exponent s with increasing temperature, the results of the σ{sub AC} are discussed using the correlated barrier height (CBH) model. For dielectric studies, the dielectric constant, ε′ is found to decrease with increasing frequency. In the whole temperature range of 100–250 °C, high and low frequency plateau are observed. Each converges at high frequency (>10{sup 5} Hz) for all the temperatures. The frequency dependence of loss tangent, tan δ, decreases with rise in temperature, with the

  20. Novel Rearrangements in the Reactions Directed Toward Preparation of Spiro-N,N-ketals: Reactions of Naphthalene-1,8-diamine with Ninhydrin and Isatin

    Directory of Open Access Journals (Sweden)

    Keiji Kobayashi

    2012-11-01

    Full Text Available Spiro-N,N-ketal 5, consisting of a phthaloperine heterocyclic ring and a naphtha[1,8-ef][1,4]diazepine ring, was obtained along with spiro-N,N-ketal 2 via 2,2-condensation in the reaction of ninhydrin with naphthalene-1,8-diamine. Their molecular structures were elucidated by X-ray crystal structural analysis. Aside from these spiro compounds, the diazapleiadiene compound 3 formed by 1,2-condensation and the 1,4-isoquinolinedione compound 4 arising from ring expansion were isolated. When isatin was reacted with naphthalene-1,8-diamine, spiro-N,N-ketal 6 and the two 1H-perimidine-based compounds 7 and 8 were isolated. Compound 8 was revealed to undergo a fast dynamic prototropic tautomerization in solution. Plausible mechanisms of the formation of the products are proposed.

  1. [Preparation of Coated CMC-Fe0 Using Rheological Phase Reaction Method and Research on Degradation of TCE in Water].

    Science.gov (United States)

    Fan, Wen-jing; Cheng, Yue; Yu, Shu-zhen; Fan, Xiao-feng

    2015-06-01

    The coated nanoscale zero-valent iron (coated CMC-Fe0) was synthesized with cheap and environment friendly CMC as the coating agent using rheological phase reaction. The sample was characterized by means of XRD, SEM, TEM and N2 adsorption-stripping and used to study reductive dechlorination of TCE. The experimental results indicated that the removal rate of TCE was about 100% when the CMC-Fe0 dosage was 6 g x L(-1), the initial TCE concentration was 5 mg x L(-1) and the reaction time was 40 h. The TCE degradation reaction of coated CMC-Fe0 followed a pseudo-first-order kinetic model. Finally, the product could be simply recovered.

  2. Tailoring galvanic replacement reaction for the preparation of Pt/Ag bimetallic hollow nanostructures with controlled number of voids.

    Science.gov (United States)

    Zhang, Weiqing; Yang, Jizheng; Lu, Xianmao

    2012-08-28

    Here we report the synthesis of Pt/Ag bimetallic nanostructures with controlled number of void spaces via a tailored galvanic replacement reaction (GRR). Ag nanocubes (NCs) were employed as the template to react with Pt ions in the presence of HCl. The use of HCl in the GRR caused rapid precipitation of AgCl, which grew on the surface of Ag NCs and acted as a removable secondary template for the deposition of Pt. The number of nucleation sites for AgCl was tailored by controlling the amount of HCl added to the Ag NCs or by introducing PVP to the reaction. This strategy led to the formation of Pt/Ag hollow nanoboxes, dimers, multimers, or popcorn-shaped nanostructures consisting of one, two, or multiple hollow domains. Due to the presence of large void space and porous walls, these nanostructures exhibited high surface area and improved catalytic activity for methanol oxidation reaction.

  3. Preparing for severe contrast media reactions in children - results of a national survey, a literature review and a suggested protocol

    International Nuclear Information System (INIS)

    Lindsay, R.; Paterson, A.; Edgar, D.

    2011-01-01

    Aim: To identify current practices within paediatric radiology in the UK with regard to the use of prophylactic medication, prior to administering intravenous (IV) radiocontrast medium (RCM). In addition, the pre-injection risk management strategies of the departments questioned was to be evaluated, and using consensus opinion, a protocol for managing patients identified as being at high risk for an adverse reaction to RCM was to be outlined. Materials and methods: An online survey of paediatric radiology consultants representing all geographic regions of the UK was carried out. The questions asked included an assessment of the risk factors for adverse reactions to RCM, and how such reactions are anticipated and managed. The questionnaire asked about the perceived indications for, and the use of prophylactic medication prior to RCM administration. Results: A response rate of 51% was achieved. The majority of respondents felt that a history of previous RCM reaction was an indication to administer prophylactic drugs prior to a further dose of RCM. No other risk factor was believed to require prophylactic medication. Conclusion: Using information obtained from the survey, a literature search was performed to assess the evidence available in support of each practice. A protocol was devised to identify children at risk of an adverse reaction to RCM, and guide the use of prophylactic medication in this group of patients. The survey highlighted considerable variability in the risk-assessment and management practices within paediatric radiology in the UK. The derived protocol may guide radiologists' management of children at risk for an RCM reaction.

  4. Preparation of Cu@Cu2O Nanocatalysts by Reduction of HKUST-1 for Oxidation Reaction of Catechol

    Directory of Open Access Journals (Sweden)

    Seongwan Jang

    2016-11-01

    Full Text Available HKUST-1, a copper-based metal organic framework (MOF, has been investigated as a catalyst in various reactions. However, the HKUST-1 shows low catalytic activity in the oxidation of catechol. Therefore, we synthesized Fe3O4@HKUST-1 by layer-by layer assembly strategy and Cu@Cu2O by reduction of HKUST-1 for enhancement of catalytic activity. Cu@Cu2O nanoparticles exhibited highly effective catalytic activity in oxidation of 3,5-di-tert-butylcatechol. Through this method, MOF can maintain the original core-shell structure and be used in various other reactions with enhanced catalytic activity.

  5. Preparation of Cu@Cu₂O Nanocatalysts by Reduction of HKUST-1 for Oxidation Reaction of Catechol.

    Science.gov (United States)

    Jang, Seongwan; Yoon, Chohye; Lee, Jae Myung; Park, Sungkyun; Park, Kang Hyun

    2016-11-02

    HKUST-1, a copper-based metal organic framework (MOF), has been investigated as a catalyst in various reactions. However, the HKUST-1 shows low catalytic activity in the oxidation of catechol. Therefore, we synthesized Fe₃O₄@HKUST-1 by layer-by layer assembly strategy and Cu@Cu₂O by reduction of HKUST-1 for enhancement of catalytic activity. Cu@Cu₂O nanoparticles exhibited highly effective catalytic activity in oxidation of 3,5-di- tert -butylcatechol. Through this method, MOF can maintain the original core-shell structure and be used in various other reactions with enhanced catalytic activity.

  6. Preparation of neptunium and plutonium tracers in nuclear reactions of sup 2 sup 3 sup 6 U with (21-60)MeV sup 3 He ions

    CERN Document Server

    Aaltonen, J; Trzaska, V; Gromova, E A; Yakovlev, V A

    2001-01-01

    Preparation of sup 2 sup 3 sup 6 Pu, sup 2 sup 3 sup 7 Pu and sup 2 sup 3 sup 5 Np by reactions sup 2 sup 3 sup 6 U( sup 3 He, t beta sup -) sup 2 sup 3 sup 6 Pu, sup 2 sup 3 sup 6 U( sup 3 He, 2n) sup 2 sup 3 sup 7 Pu and sup 2 sup 3 sup 6 U( sup 3 He, p3n) sup 2 sup 3 sup 5 Np in sup 3 He ion beams, their energy 43 and 60 MeV, in the K-130 cyclotron at Yuvyaskyul University (Finland) was studied. Cross sections of the reactions were determined. Yield curves for thick targets were calculated. The results are discussed and compared with previously obtained data on other reactions giving rise to formation of the same products. Methods of radiochemical separation of the products and sample preparation for alpha- and gamma-spectrometry are described

  7. Diels-Alder Reaction of Isobenzofurans/Cyclopentadienones with Tetrathiafulvalene: Preparation of Naphthalene, Fluoranthene, and Fluorenone Derivatives.

    Science.gov (United States)

    Karunakaran, Jayachandran; Mohanakrishnan, Arasambattu K

    2018-02-16

    Diels-Alder reaction of 1,3-diarylbenzo[c]furan/cyclopentadienone with TTF followed by triflic acid mediated cleavage of the resulting adducts led to the formation of the respective 1,4-diaryl substituted naphthalenes, fluoranthenes, and fluorenones. The photophysical properties of representative diaryl-substituted hydrocarbons are also reported.

  8. Effects of beetroot (Beta vulgaris) preparations on the Maillard reaction products in milk and meat-protein model systems

    NARCIS (Netherlands)

    Rackauskienea, I.; Pukalskas, A.; Rimantas Venskutonis, P.; Fiore, A.M.; Troise, A.D.; Fogliano, V.

    2015-01-01

    The effects of beetroots (Beta vulgaris) on the formation of Maillard reaction (MR) products possessing health, nutritional and sensory implications were studied. The effect of dried beetroot juice on the formation of Ne-(carboxymethyl)lysine (CML) and Ne-(2-furoylmethyl)-L-lysine (furosine) was

  9. Preparation of ultra-fine calcium carbonate by a solvent-free reaction using supersonic airflow and low temperatures

    OpenAIRE

    Cai, Yan-Hua; Ma, Dong-Mei; Peng, Ru-Fang; Chu, Shi-Jin

    2008-01-01

    The treatment of calcium chloride with sodium carbonate under solvent-free conditions with a supersonic airflow and at a low heating temperature leads to the synthesis of ultra-fine calcium carbonate. The reaction not only involves mild conditions, a simple operation, and high yields but also gives a high conversion rate.

  10. Fast preparation of Na0.44MnO2 nanorods via a high NaOH concentration hydrothermal soft chemical reaction and their lithium storage properties

    International Nuclear Information System (INIS)

    Liu, Cai; Li, Jiangang; Zhao, Pengxiang; Guo, Wenli; Yang, Xiaoping

    2015-01-01

    This paper describes a high NaOH concentration hydrothermal soft chemical reaction to prepare Na 0.44 MnO 2 nanorods. In this process, Na-birnessite precursors and concentrated NaOH solution are introduced into the hydrothermal reaction. As a result, the hydrothermal time can be significantly shortened from 96 to 24 h, the hydrothermal temperature can be reduced from 205 to 180 °C and the yield of Na 0.44 MnO 2 can be increased from about 0.6 to about 2.4 g/(mL . day), respectively. Furthermore, the obtained Na 0.44 MnO 2 nanorods with one-dimensional tunnel structures exhibit favorable electrochemical lithium storage properties, which make them promising for the cathode materials of lithium-ion batteries

  11. Aza‐Michael addition reaction: Post‐polymerization modification and preparation of PEI/PEG‐based polyester hydrogels from enzymatically synthesized reactive polymers

    DEFF Research Database (Denmark)

    Hoffmann, Christian; Stuparu, Mihaiela C.; Daugaard, Anders Egede

    2015-01-01

    The utility of aza‐Michael addition chemistry for post‐polymerization functionalization of enzymatically prepared polyesters is established. For this, itaconate ester and oligoethylene glycol are selected as monomers. A Candida Antarctica lipase B catalyzed polycondensation reaction between the two...... monomers provides the polyesters, which carry an activated carbon‐carbon double bond in the polymer backbone. These electron deficient alkenes represent suitable aza‐Michael acceptors and can be engaged in a nucleophilic addition reaction with small molecular mono‐amines (aza‐Michael donors) to yield...... functionalized linear polyesters. Employing a poly‐amine as the aza‐Michael donor, on the other hand, results in the formation of hydrophilic polymer networks....

  12. Preparation of deuteriated adipic [2H2]-, [2H4]-, [2H6]-, and [2H8]-acids by use of Kolbe electrolysis as a key reaction

    International Nuclear Information System (INIS)

    Tashiro, Masahi; Tsuzuki, Hirohisa; Mataka, Shuntaro; Goto, Hideyuki; Ogasahara, Shoji

    1990-01-01

    Using Kolbe electrolysis of methyl hydrogen [ 2 H 0 ]-, [ 2 H 2 ]-, and [ 2 H 4 ]-succinates as a key reaction, adipic [2,2- 2 H 2 ]-, [2,3- 2 H 2 ]-, [2,2,3,3- 2 H 4 ]-, [2,3,4,5- 2 H 4 ]-, [2,3,5,5- 2 H 4 ]-, [2,2,3,3,5,5- 2 H 6 ]-, and [2,2,3,3,4,4,5,5- 2 H 8 ]-acids were prepared in high deuterium contents. (author)

  13. Vitamin C attenuates negative effects of vitrification on sperm parameters, chromatin quality, apoptosis and acrosome reaction in neat and prepared normozoospermic samples

    Directory of Open Access Journals (Sweden)

    Esmat Mangoli

    2018-04-01

    Full Text Available Objective: Aim of this study was to evaluate the effects of vitamin C on sperm parameters, sperm chromatin quality and apoptosis resulted of vitrification in neat semen and prepared spermatozoa of normozoospermic samples. Material and methods: Forty semen samples from normozoospermic men were included in this prospective study. Each sample was divided into five groups. Group I: control or fresh semen, group II: semen prepared by swim-up method and then vitrified, group III: neat semen was vitrified, group IV: vitamin C (600 μM was added to prepared spermatozoa and then vitrified and group V: vitamin C (600 μM was added to neat semen and then vitrified. After warming, sperm analysis was done accordingly. For evaluating the sperm chromatin/DNA integrity status and acrosome reaction, we used toluidine blue (TB, acridine orange (AO, terminal transferase mediated deoxyuridine triphosphate biotin end labeling (TUNEL and double staining tests. Results: All of the sperm parameters (count, motility, morphology and viability had significant differences (P < 0.05 between different groups, especially in group IV. Data showed sperm chromatin damages and acrosome reaction abnormality increased resulted of vitrification, but, in the groups that added vitamin C (IV, V rate of damages was decreased and this was notable in the group IV. Conclusion: Vitamin C can attenuate the detrimental effects of vitrification on sperm parameters, chromatin quality and rate of apoptosis in both neat semen and prepared spermatozoa of normozoospermic samples. Keywords: Vitrification, Spermatozoa, Vitamin C, Chromatin, Human sperm

  14. Methanol electrocatalytic oxidation on Pt nanoparticles on nitrogen doped graphene prepared by the hydrothermal reaction of graphene oxide with urea

    International Nuclear Information System (INIS)

    Xu, Xiao; Zhou, Yingke; Yuan, Tao; Li, Yawei

    2013-01-01

    A facile hydrothermal reaction of graphene oxide with urea was used to produce nitrogen doped graphene, and Pt nanoparticles were deposited on the obtained nitrogen doped graphene by the NaBH 4 reduction route. The morphology and microstructure of the synthesized catalysts were characterized by transmission electron microscopy, X-ray powder diffraction and X-ray photoelectron spectroscopy, while the functional groups on the surface of the catalysts were investigated by the Fourier transform infrared spectroscopy and ultraviolet-visible absorption spectra. Cyclic voltammetry, chronoamperometry and electrochemical impedance techniques were carried out to evaluate the methanol electrocatalytic oxidation activity and durability of Pt catalysts supported on the nitrogen doped graphene. The results showed that nitrogen doping and reduction of GO were achieved simultaneously by the facile hydrothermal reaction, which had beneficial effects for the deposition process and electrocatalytic activity of Pt nanoparticles. The Pt catalysts supported on the nitrogen doped graphene substrate presented excellent activity and durability of methanol oxidation reaction, which might be promising for application in direct methanol fuel cells

  15. Preparation of Cu@Cu2O Nanocatalysts by Reduction of HKUST-1 for Oxidation Reaction of Catechol

    OpenAIRE

    Seongwan Jang; Chohye Yoon; Jae Myung Lee; Sungkyun Park; Kang Hyun Park

    2016-01-01

    HKUST-1, a copper-based metal organic framework (MOF), has been investigated as a catalyst in various reactions. However, the HKUST-1 shows low catalytic activity in the oxidation of catechol. Therefore, we synthesized Fe3O4@HKUST-1 by layer-by layer assembly strategy and Cu@Cu2O by reduction of HKUST-1 for enhancement of catalytic activity. Cu@Cu2O nanoparticles exhibited highly effective catalytic activity in oxidation of 3,5-di-tert-butylcatechol. Through this method, MOF can maintain the ...

  16. Gasification catalysts prepared by the reaction of CaCO3 and coal. Tansan karushiumu to sekitan no ion kokan hanno ni yori choseishita kokassei gas ka shokubai

    Energy Technology Data Exchange (ETDEWEB)

    Otsuka, Y.; Asami, K. (Tohoku University, Sendai (Japan). Institute for Chemical Reaction Science)

    1991-11-07

    Properties of the active gasification catalysts prepared by ion exchange reaction of CaCO3 and coal were studied. Several kinds of Ca-loaded coal specimens were prepared to compare their properties among them by physically mixing coal particles with CaCO3 ones in air, by kneading both materials in pure water while crashing and by impregnating CaCO3 into coal while agitating them in pure water. Although Ca-loading onto the impregnated specimen was nearly one-half that of the kneaded one, its catalysis was equal to the kneaded one. CaCO3 greatly accelerated steam gasification only by mixing it with low rank coal in water, and such a high catalytic activity was caused by ion-exchanged Ca produced by the reaction between CaCO3 and COOH radical in coal. Aragonite of seashells yielded more Ca-loading than calcite of limestone, suggesting one of the useful treatment of seashell waste. 3 refs., 4 figs., 2 tabs.

  17. Zinc Enolate/Sulfinate Prepared from a Single-Run Reaction Using Zinc Dust with O-Tosylated 4-Hydroxy Coumarin and Pyrone

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Ueon Sang; Joo, Seong-Ryu; Kim, Seung-Hoi [Dankook University, Cheonan (Korea, Republic of)

    2016-07-15

    We demonstrated the preparation of new zinc complexes, 2-oxo-2H-chromen-4-yloxy tosylzinc (I), and 6-methyl-2-oxo-2H-pyran-4-yloxy tosylzinc (II), by the oxidative addition of readily available zinc dust into the corresponding 4-tosylated coumarin (A) and pyrone (B), respectively. Of special interest, the thus-obtained zinc complexes showed an electrophile-dependent reactivity. The subsequent coupling reactions of I and II with a variety of acid chlorides provided the O-acylation product in moderate yields. More interestingly, it should be emphasized that the thus-prepared zinc complexes (I and II) functioned both as zinc enolate and zinc sulfinate, providing C(3)-disubstituted product (b) and sulfone (c), respectively, from a single-run reaction when I or II was treated with benzyl halides. Even though somewhat low yields were achieved under the nonoptimized conditions, the novel zinc complexes present another potential application for zinc reagents. Versatile applications of this discovery are currently underway.

  18. Analyte-triggered luminescence of Eu{sup 3+} ions encapsulated in Nafion membranes -preparation of hybrid materials from in membrane chemical reactions-

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar-Sánchez, Rocío, E-mail: raguilar@ifuap.buap.mx [Depto. Química Analítica, Facultad de Ciencias Químicas, Benemérita Universidad Autónoma de Puebla, Puebla 72570 (Mexico); Zelocualtecatl-Montiel, Iván [Depto. Química Analítica, Facultad de Ciencias Químicas, Benemérita Universidad Autónoma de Puebla, Puebla 72570 (Mexico); Gálvez-Vázquez, María de Jesús [Depto. Química Analítica, Facultad de Ciencias Químicas, Benemérita Universidad Autónoma de Puebla, Puebla 72570 (Mexico); Instituto de Física, Benemérita Universidad Autónoma de Puebla, Apartado postal J-48, Puebla 72570 (Mexico); Silva-González, Rutilo [Instituto de Física, Benemérita Universidad Autónoma de Puebla, Apartado postal J-48, Puebla 72570 (Mexico)

    2017-04-15

    The possibility to perform chemical reactions inside polymer materials opens a unique opportunity to control and prepare materials for diverse solid-state applications. Based on the affinity of Eu{sup 3+} ions for oxygen functionalities, in this work we report the luminescence enhancement of Eu{sup 3+} ions inserted in Nafion membranes (Naf/Eu{sup 3+}) by in-situ complexing to oxalate. The formation of a europium-oxalate type complex enhances Eu{sup 3+} luminescence emission, which could be exploited for the construction of devices for oxalate sensing and the fabrication of highly luminescent materials. Possible analytical applications of Naf/Eu{sup 3+} membranes were evaluated by fluorescence spectroscopy through the linear response with concentration. The complex formation was followed by infrared spectroscopy and SEM-EDS analysis. - Highlights: • Luminescence enhancement by complexation of Eu{sup 3+} ions to oxalate inside Nafion. • Performance of chemical reactions inside Nafion/polymer membranes. • An easy and novel method to prepare luminescent solid devices. • Possibility to develop luminescent sensors by analyte-triggered optical response.

  19. Zinc Enolate/Sulfinate Prepared from a Single-Run Reaction Using Zinc Dust with O-Tosylated 4-Hydroxy Coumarin and Pyrone

    International Nuclear Information System (INIS)

    Shin, Ueon Sang; Joo, Seong-Ryu; Kim, Seung-Hoi

    2016-01-01

    We demonstrated the preparation of new zinc complexes, 2-oxo-2H-chromen-4-yloxy tosylzinc (I), and 6-methyl-2-oxo-2H-pyran-4-yloxy tosylzinc (II), by the oxidative addition of readily available zinc dust into the corresponding 4-tosylated coumarin (A) and pyrone (B), respectively. Of special interest, the thus-obtained zinc complexes showed an electrophile-dependent reactivity. The subsequent coupling reactions of I and II with a variety of acid chlorides provided the O-acylation product in moderate yields. More interestingly, it should be emphasized that the thus-prepared zinc complexes (I and II) functioned both as zinc enolate and zinc sulfinate, providing C(3)-disubstituted product (b) and sulfone (c), respectively, from a single-run reaction when I or II was treated with benzyl halides. Even though somewhat low yields were achieved under the nonoptimized conditions, the novel zinc complexes present another potential application for zinc reagents. Versatile applications of this discovery are currently underway

  20. Analysis of the learning curve for pre-cut corneal specimens in preparation for lamellar transplantation: a prospective, single-centre, consecutive case series prepared at the Lions New South Wales Eye Bank.

    Science.gov (United States)

    Martin, Aifric Isabel; Devasahayam, Rajnesh; Hodge, Christopher; Cooper, Simon; Sutton, Gerard L

    2017-09-01

    This study is the first paper to establish a learning curve by a single technician. Preparation of pre-cut corneal endothelial grafts commenced at Lions New South Wales Eye Bank in December 2014. The primary objective of this study was to review the safety and reliability of the preparation method during the first year of production. This is a hospital-based, prospective case series. There were 234 consecutive donor corneal lenticules. Donor lenticules were prepared by a single operator using a linear cutting microkeratome. Immediately prior to cutting, central corneal thickness values were recorded. Measurements of the corneal bed were taken immediately following lenticule preparation. Outcomes were separated by blade sizes, and intended thickness was compared to actual thickness for each setting. Early specimens were compared to later ones to assess for a learning curve within the technique. The main parameter measured is the mean difference from intended lamellar cut thickness. The mean final cut thickness was 122.36 ± 20.35 μm, and the mean difference from intended cut was 30.17 ± 37.45 μm. No significant difference was found between results achieved with early specimens versus those achieved with later specimens (P = 0.425). Thin, reproducible endothelial grafts can routinely be produced by trained technicians at their respective eye banks without significant concerns for an extended learning curve. This service can reduce perioperative surgical complexity, required surgical paraphernalia and theatre times. The consistent preparation of single-pass, ultrathin pre-cut corneas may have additional advantages for surgeons seeking to introduce lamellar techniques. © 2017 Royal Australian and New Zealand College of Ophthalmologists.

  1. Photo catalytic reduction of benzophenone on TiO2: Effect of preparation method and reaction conditions

    International Nuclear Information System (INIS)

    Albiter E, E.; Valenzuela Z, M. A.; Alfaro H, S.; Flores V, S. O.; Rios B, O.; Gonzalez A, V. J.; Cordova R, I.

    2010-01-01

    The photo catalytic reduction of benzophenone was studied focussing on improving the yield to benzhydrol. TiO 2 was synthesized by means of a hydrothermal technique. TiO 2 (Degussa TiO 2 -P25) was used as a reference. Catalysts were characterized by X-ray diffraction and nitrogen physisorption. The photo catalytic reduction was carried out in a batch reactor at 25 C under nitrogen atmosphere, acetonitrile as solvent and isopropanol as electron donor. A 200 W Xe-Hg lamp (λ= 360 nm) was employed as irradiation source. The chemical composition of the reaction system was determined by HPLC. Structural and textural properties of the synthesized TiO 2 depended on the type of acid used during sol formation step. Using HCl, a higher specific surface area and narrower pore size distribution of TiO 2 was obtained in comparison with acetic acid. As expected, the photochemical reduction of benzophenone yielded benzopinacol as main product, whereas, benzhydrol is only produced in presence of TiO 2 (i.e. photo catalytic route). In general, the hydrothermally synthesized catalysts were less active and with a lower yield to benzhydrol. The optimal reaction conditions to highest values of benzhydrol yield (70-80%) were found at 2 g/L (catalyst loading) and 0.5 m M of initial concentration of benzophenone, using commercial TiO 2 -P25. (Author)

  2. Photo catalytic reduction of benzophenone on TiO{sub 2}: Effect of preparation method and reaction conditions

    Energy Technology Data Exchange (ETDEWEB)

    Albiter E, E.; Valenzuela Z, M. A.; Alfaro H, S.; Flores V, S. O.; Rios B, O.; Gonzalez A, V. J.; Cordova R, I., E-mail: mavalenz@ipn.m [IPN, Escuela Superior de Ingenieria Quimica e Industrias Extractivas, Laboratorio de Catalisis y Materiales, Zacatenco, 07738 Mexico D. F. (Mexico)

    2010-07-01

    The photo catalytic reduction of benzophenone was studied focussing on improving the yield to benzhydrol. TiO{sub 2} was synthesized by means of a hydrothermal technique. TiO{sub 2} (Degussa TiO{sub 2}-P25) was used as a reference. Catalysts were characterized by X-ray diffraction and nitrogen physisorption. The photo catalytic reduction was carried out in a batch reactor at 25 C under nitrogen atmosphere, acetonitrile as solvent and isopropanol as electron donor. A 200 W Xe-Hg lamp ({lambda}= 360 nm) was employed as irradiation source. The chemical composition of the reaction system was determined by HPLC. Structural and textural properties of the synthesized TiO{sub 2} depended on the type of acid used during sol formation step. Using HCl, a higher specific surface area and narrower pore size distribution of TiO{sub 2} was obtained in comparison with acetic acid. As expected, the photochemical reduction of benzophenone yielded benzopinacol as main product, whereas, benzhydrol is only produced in presence of TiO{sub 2} (i.e. photo catalytic route). In general, the hydrothermally synthesized catalysts were less active and with a lower yield to benzhydrol. The optimal reaction conditions to highest values of benzhydrol yield (70-80%) were found at 2 g/L (catalyst loading) and 0.5 m M of initial concentration of benzophenone, using commercial TiO{sub 2}-P25. (Author)

  3. Influence of the precursors in the chemical preparation of γ - Al2O3 in reactions of alcohols dehydration

    International Nuclear Information System (INIS)

    Salmones, J.; Limon, M.T.; Mayagoitia, V.; Rojas, F.; Kornhauser, I.; Morales, J.; Acosta, D.

    1998-01-01

    A chemical method for the synthesis of alumina substrates based on a microscopic morphological control, is presented. The influence of the precursor alcohol used for the synthesis of Al(OR) 3 is studied too. This latter compound is the raw material to synthesize the alumina materials treated here. The effects of alcohols such as ethanol, isopropanol and ter butanol are analyzed. Results show that an early formation (i.e. at low temperature) of the porous structure is reached in the case of γ -Al 2 O 3 synthesized from ethanol. On the other hand, pore formation for alumina obtained from isopropanol and ter butanol, occurs until appearance of the γ phase (at approximately 500 Centigrade). The different alumina substrates were used as catalysts in dehydration reactions of primary, secondary and tertiary alcohols. Decreasing catalytic activity corresponds to the sequence: (R-OH) 3 2 2 3 . These results are explained by means of a reaction mechanism which is associated with the textural properties of the catalysts. (Author)

  4. International research centre launched

    International Nuclear Information System (INIS)

    1965-01-01

    Full text: The first scientific research and educational institution to be set up on a completely international basis was officially inaugurated in Trieste on 5 October 1964 by the Director General of IAEA, Dr. Sigvard Eklund, when he opened the first seminar of the International Centre for Theoretical Physics. As evidence of the international nature of the institution he noted that the scientists who would work and teach there during the first year represented sixteen different countries. By the end of 1964, the Centre building was nearing completion and three of the five floors were occupied. A successful symposium had been held on the subject of plasma physics, and a score of professors and fellows were at work, from Bulgaria, Czechoslovakia, Greece, India, Japan, Jordan, the Netherlands, Norway, Pakistan, Poland, the United Kingdom, and the United States. A dozen scientific papers had been issued as preprints. The main purpose of the Centre is to foster the advancement of theoretical physics through training and research; at first the chief subject will be high-energy and elementary particle physics. Plasma physics, low energy physics and solid-state physics will also be dealt with. Special attention is paid to the needs of the developing countries. Of the 25 fellows selected for the academic year 1964-65, more than half are from South America, Africa and Asia. In conjunction with the Research Centre, there is an Advanced School for theoretical Physics to provide graduate training for fellows who need such preparation before they embark upon research. The Centre works under the guidance of a Scientific Council comprising the president, Prof. M. Sandoval-Vallarta (Nuclear Energy Commission of Mexico); Prof. A. Abragam (Saclay, France); Prof. R. Oppenheimer (Institute for Advanced Study, Princeton, USA); Dr. V. Soloviev (Dubna, USSR); Prof V.F. Weiskopf (Director General, CERN) ; Prof Abdus Salam (Imperial College, London) ; Prof. P. Budini (University of Trieste

  5. The oral food desensitization in the Italian allergy centres.

    Science.gov (United States)

    Meglio, P; Caminiti, L; Pajno, G B; Dello Iacono, I; Tripodi, S; Verga, M C; Martelli, A

    2015-05-01

    Attempts aimed at inducing food tolerance through oral food desensitization (OFD) for the treatment of IgE-mediated food allergies are increasing. In Italy, a number of allergy centres offer this procedure. To collect information on how these centres are organized, how patients are selected, the methods used to administer OFD and how adverse reactions are managed. A questionnaire was e-mailed to all the Italian allergy centres offering OFD. The survey shows a high degree of variability between centres. A correct diagnosis of food allergy is crucial for selecting patients for OFD. In the Italian allergy centres, oral food challenges are mostly open label (84%), but in 16% of cases they are single-blind (8%) or double-blind (8%). A high proportion of allergy centres (83%) offer OFD to children presenting forms of anaphylaxis triggered by traces--or very low doses--of food allergen. The majority of allergy centres (76%) enroll patients over 3 years of age, with 44% enrolling patients above the age of 5. Not-controlled asthma, unreliability of parents in the management of OFD and/or risk of adverse events, are the main reasons for exclusion from the procedure. Although OFD may sometimes be successful and may be considered a valid alternative to an elimination diet, further randomized controlled trials are needed, in order to clarify some controversial points, such as the characteristics of the child undergoing OFD, and the methods of food preparation and administration. Moreover, further studies should further investigate OFD safety, efficacy and costs.

  6. One-Pot and Efficient Synthesis of Triazolo[1,2-a]indazole-triones via Reaction of Arylaldehydes with Urazole and Dimedone Catalyzed by Silica Nanoparticles Prepared from Rice Husk

    Directory of Open Access Journals (Sweden)

    Asadollah Hassankhani

    2011-10-01

    Full Text Available A novel synthesis of triazolo[1,2-a]indazole-1,3,8-trione derivatives by reaction of urazole, dimedone and aromatic aldehydes under conventional heating and microwave irradiation and solvent-free conditions using silica nanoparticles prepared from rice husk ash as catalyst is described. The new method features high yields, multicomponent reactions and environmental friendliness.

  7. One-pot and efficient synthesis of triazolo[1,2-a]indazole-triones via reaction of arylaldehydes with urazole and dimedone catalyzed by silica nanoparticles prepared from rice husk.

    Science.gov (United States)

    Hamidian, Hooshang; Fozooni, Samieh; Hassankhani, Asadollah; Mohammadi, Sayed Zia

    2011-10-26

    A novel synthesis of triazolo[1,2-a]indazole-1,3,8-trione derivatives by reaction of urazole, dimedone and aromatic aldehydes under conventional heating and microwave irradiation and solvent-free conditions using silica nanoparticles prepared from rice husk ash as catalyst is described. The new method features high yields, multicomponent reactions and environmental friendliness.

  8. Preparation and characterization of a new hybrid material formed by reaction of cobalt (II) nitroprusside and octa(aminopropyl)silsesquioxane

    International Nuclear Information System (INIS)

    Magossi, Mariana de Souza; Carmo, Devaney Ribeiro do

    2016-01-01

    Full text: The term silsesquioxane etymologically refers to the nanostructured compounds that has structures that feature the empirical formula (RSiO 1,5 ) n , where R is a hydrogen atom or an organic group. Each silicon atom is connected on an average of 1.5 oxygen atoms and a group R (hydrocarbon, or an organic group) [1]. In this work, a new hybrid material (ACCoN) based on octa(aminopropyl)silsesquioxane (AC) and cobalt (II) nitroprusside have been prepared following a new synthesis route. Within this context, the objective of this work was to prepare and characterize this new material for electro analytical purposes. The ACCoN was characterized by several techniques such as: spectroscopy in the region of infrared (FTIR), Energy-Dispersive X-ray spectroscopy (EDS), Scanning Electron microscopy (SEM) and X-Ray Diffraction (XRD). The FTIR spectra showed absorption bands in 1106 cm -1 refer to the stretching vibration ν s (Si-O-Si) characteristics of the structure of silsesquioxane. An important vibration can be observed which is related to the stretching vibrations of the type νN-O which occurs near 1945 cm -1 , characteristic of the sodium nitroprusside, where in the ACCoN the νN-O is shifted for more high frequency (about 117 cm -1 ) relative to sodium nitroprusside. Additionally a drastic reduction of stretching vibrations intensity νC≡N was observed in the ACCoN. This fact is an indicative of the formation of the intervalence complex, where the CN- and metal centers are bound. Through SEM and EDS spectroscopies was observed clusters of cubic particles with an average size of 325 nm. The ACCoN presents the elements Si, O, N, Co and Fe in its structure. Therefore through the aforementioned spectroscopic analysis, we conclude that the preparation of ACCoN was successfully conducted. [1] Cordes, D. B.; Lickiss, P. D.; Rataboul, F. Chemical Reviews, vol. 110, p. 2081-2173 (2010). (author)

  9. Preparation and characterization of a new hybrid material formed by reaction of cobalt (II) nitroprusside and octa(aminopropyl)silsesquioxane

    Energy Technology Data Exchange (ETDEWEB)

    Magossi, Mariana de Souza; Carmo, Devaney Ribeiro do, E-mail: marymagossi@gmail.com [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Ilha Solteira, SP (Brazil). Faculdade de Engenharia

    2016-07-01

    Full text: The term silsesquioxane etymologically refers to the nanostructured compounds that has structures that feature the empirical formula (RSiO{sub 1,5}){sub n}, where R is a hydrogen atom or an organic group. Each silicon atom is connected on an average of 1.5 oxygen atoms and a group R (hydrocarbon, or an organic group) [1]. In this work, a new hybrid material (ACCoN) based on octa(aminopropyl)silsesquioxane (AC) and cobalt (II) nitroprusside have been prepared following a new synthesis route. Within this context, the objective of this work was to prepare and characterize this new material for electro analytical purposes. The ACCoN was characterized by several techniques such as: spectroscopy in the region of infrared (FTIR), Energy-Dispersive X-ray spectroscopy (EDS), Scanning Electron microscopy (SEM) and X-Ray Diffraction (XRD). The FTIR spectra showed absorption bands in 1106 cm{sup -1} refer to the stretching vibration ν{sub s}(Si-O-Si) characteristics of the structure of silsesquioxane. An important vibration can be observed which is related to the stretching vibrations of the type νN-O which occurs near 1945 cm{sup -1}, characteristic of the sodium nitroprusside, where in the ACCoN the νN-O is shifted for more high frequency (about 117 cm{sup -1}) relative to sodium nitroprusside. Additionally a drastic reduction of stretching vibrations intensity νC≡N was observed in the ACCoN. This fact is an indicative of the formation of the intervalence complex, where the CN- and metal centers are bound. Through SEM and EDS spectroscopies was observed clusters of cubic particles with an average size of 325 nm. The ACCoN presents the elements Si, O, N, Co and Fe in its structure. Therefore through the aforementioned spectroscopic analysis, we conclude that the preparation of ACCoN was successfully conducted. [1] Cordes, D. B.; Lickiss, P. D.; Rataboul, F. Chemical Reviews, vol. 110, p. 2081-2173 (2010). (author)

  10. Room temperature ferromagnetism in Eu-doped ZnO nanoparticulate powders prepared by combustion reaction method

    International Nuclear Information System (INIS)

    Franco, A.; Pessoni, H.V.S.; Soares, M.P.

    2014-01-01

    Nanoparticulate powders of Eu-doped ZnO with 1.0, 1.5, 2.0 and 3.0 at% Eu were synthesized by combustion reaction method using zinc nitrate, europium nitrate and urea as fuel without subsequent heat treatments. X-ray diffraction patterns (XRD) of all samples showed broad peaks consistent with the ZnO wurtzite structure. The absence of extra reflections in the diffraction patterns ensures the phase purity, except for x=0.03 that exhibits small reflection corresponding to Eu 2 O 3 phase. The average crystallite size determined from the most prominent (1 0 1) peak of the diffraction using Scherrer's equation was in good agreement with those determined by transmission electron microscopy (TEM); being ∼26 nm. The magnetic properties measurements were performed using a vibrating sample magnetometer (VSM) in magnetic fields up to 2.0 kOe at room temperature. The hysteresis loops, typical of magnetic behaviors, indicating that the presence of an ordered magnetic structure can exist in the Eu-doped ZnO wurtzite structure at room temperature. The room temperature ferromagnetism behavior increases with the Eu 3+ doping concentration. All samples exhibited the same Curie temperature (T C ) around ∼726 K, except for x=0.01; T C ∼643 K. High resolution transmission electron microscopy (HRTEM) images revealed defects/strain in the lattice and grain boundaries of Eu-doped ZnO nanoparticulate powders. The origin of room temperature ferromagnetism in Eu-doped ZnO nanoparticulate powders was discussed in terms of these defects, which increase with the Eu 3+ doping concentration. - Highlights: • Room-temperature ferromagnetism. • Structural and magnetic properties of nanoparticulate powders of Zn 1−x Eu x O. • Combustion reaction method

  11. Preparation of Pt Nanocatalyst on Carbon Materials via a Reduction Reaction of a Pt Precursor in a Drying Process.

    Science.gov (United States)

    Lee, Jae-Young; Lee, Woo-Kum; Rim, Hyung-Ryul; Joung, Gyu-Bum; Weidner, John W; Lee, Hong-Ki

    2016-06-01

    Platinum (Pt) nanocatalyst for a proton-exchange membrane fuel cell (PEMFC) was prepared on a carbon black particle or a graphite particle coated with a nafion polymer via a reduction of platinum(II) bis(acetylacetonate) denoted as Pt(acac)2 as a Pt precursor in a drying process. Sublimed Pt(acac)2 adsorbed on the nafion-coated carbon materials was reduced to Pt nanoparticles in a glass reactor at 180 degrees C of N2 atmosphere. The morphology of Pt nanoparticles on carbon materials was observed by scanning electron microscopy (SEM) and the distribution of Pt nanoparticles was done by transmission electron microscopy (TEM). The particle size was estimated by analyzing the TEM image using an image analyzer. It was found that nano-sized Pt particles were deposited on the surface of carbon materials, and the number density and the average particle size increased with increasing reduction time.

  12. Redox reaction between graphene oxide and In powder to prepare In2O3/reduced graphene oxide hybrids for supercapacitors

    Science.gov (United States)

    Xu, Xiaoyang; Wu, Tao; Xia, Fengling; Li, Yi; Zhang, Congcong; Zhang, Lei; Chen, Mingxi; Li, Xichuan; Zhang, Li; Liu, Yu; Gao, Jianping

    2014-11-01

    A facile and quick route for the chemical reduction of graphene oxide (GO) using In powder as a reductant has been established. The reduction of GO by In powder is traced by UV-visible absorption spectroscopy, and the obtained reduced graphene oxide (rGO) is analyzed. The In3+ ions produced during the reaction between the GO and the In powder are chemically transformed to In2O3 and then form In2O3/rGO hybrids. The In2O3/rGO hybrids are used as electrode materials and their electrochemical performance are studied using cyclic voltammetry and galvanostatic charge/discharge. The In2O3/rGO hybrids demonstrate excellent electrochemical performance and their highest specific capacitance is 178.8 F g-1 which is much higher than that of either In2O3 or rGO. In addition, the In2O3/rGO hybrids are also very stable.

  13. Protein valves prepared by click reaction grafting of poly(N-isopropylacrylamide) to electrospun poly(vinyl chloride) fibrous membranes

    Science.gov (United States)

    Guo, Jian-Wei; Lin, Zhen-Yu; Chang, Chi-Jung; Lu, Chien-Hsing; Chen, Jem-Kun

    2018-05-01

    In this study, poly(vinyl chloride) (PVC) was electrospun into fibrous membranes and then reacted with NaN3 to generate azido-terminated PVC fibrous membranes. A propargyl-terminated poly(N-isopropylacrylamide) (PNIPAAm) was also synthesized and then grafted, through click reactions, onto the azido-terminated PVC fiber surface. Protrusion-, scale-, and joint-like structures of the PNIPAAm grafts on the PVC fibers were formed upon increasing the molecular weight of the PNIPAAm grafts. The PNIPAAm-grafted PVC fibrous mats exhibited completely wetted surfaces at 25 °C because of their high roughness. The static water contact angle of the PNIPAAm-grafted PVC fibrous mats reached 140° when the temperature was increased to 45 °C. This thermoresponsive behavior was significantly greater than that of the PNIPAAm grafted on a flat surface. Temperature-responsive membranes were constructed having a pore size of 1.38 μm and applied as protein valves to block and release an antibody (fluorescein-conjugated AffiniPure goat anti-rabbit IgG). At 25 °C, the collection efficiency remained at 94% for antibody concentrations up to 60 ng/L. As the temperature increased to 45 °C, the collection efficiency decreased abruptly, to 4%, when the antibody concentration was greater than 20 ng/L. Accordingly, this system of PNIPAAm-grafted PVC fibers functioned as a protein valve allowing the capture and concentration of proteins.

  14. Optical and structural properties of zinc oxide films with different thicknesses prepared by successive ionic layer adsorption and reaction method

    Energy Technology Data Exchange (ETDEWEB)

    Taner, Ahmet, E-mail: ataner@anadolu.edu.tr [Institute of Science and Technology, Anadolu University, Eskisehir 26470 (Turkey); Kul, Metin; Turan, Evren; Aybek, A. Senol; Zor, Muhsin [Department of Physics, Anadolu University, Eskisehir 26470 (Turkey); Taskoeprue, Turan [Department of Physics, Anadolu University, Eskisehir 26470 (Turkey); Department of Physics, Cank Latin-Small-Letter-Dotless-I r Latin-Small-Letter-Dotless-I Karatekin University, Cank Latin-Small-Letter-Dotless-I r Latin-Small-Letter-Dotless-I 18100 (Turkey)

    2011-12-01

    In this work, zinc oxide semiconducting films belonging to the II-VI group have been produced by successive ionic layer adsorption and reaction (SILAR) method on glass substrates with 10, 15, 20 and 25 cycles at room temperature. Following the deposition, the samples were dried in air at 400 Degree-Sign C for 1 h. The films were characterized by X-ray diffraction, field emission scanning electron microscopy and optical absorption measurement techniques. The X-ray diffractions of the films showed that they are hexagonal in structure. The crystallite size of ZnO films varied between 34 and 38 nm accordingly with the number of SILAR cycles. The material has exhibited direct band gap transition with the band gap values lying in the range between 3.13 and 3.18 eV. The red shift is observed in the absorption edge as the cycles increased. Transmission of the films decreased from 65 to 40% with increasing the number of cycles.

  15. Optical and structural properties of zinc oxide films with different thicknesses prepared by successive ionic layer adsorption and reaction method

    International Nuclear Information System (INIS)

    Taner, Ahmet; Kul, Metin; Turan, Evren; Aybek, A. Şenol; Zor, Muhsin; Taşköprü, Turan

    2011-01-01

    In this work, zinc oxide semiconducting films belonging to the II-VI group have been produced by successive ionic layer adsorption and reaction (SILAR) method on glass substrates with 10, 15, 20 and 25 cycles at room temperature. Following the deposition, the samples were dried in air at 400 °C for 1 h. The films were characterized by X-ray diffraction, field emission scanning electron microscopy and optical absorption measurement techniques. The X-ray diffractions of the films showed that they are hexagonal in structure. The crystallite size of ZnO films varied between 34 and 38 nm accordingly with the number of SILAR cycles. The material has exhibited direct band gap transition with the band gap values lying in the range between 3.13 and 3.18 eV. The red shift is observed in the absorption edge as the cycles increased. Transmission of the films decreased from 65 to 40% with increasing the number of cycles.

  16. Preparation of a Composite of Sulfated Zirconia/Metal Organic Framework and its Application in Esterification Reaction

    Energy Technology Data Exchange (ETDEWEB)

    Park, Eun Young; Hasan, Zubair; Ahmed, Imteaz; Jhung, Sung Hwa [Kyungpook National Univ., Daegu (Korea, Republic of)

    2014-06-15

    A porous metal-organic framework (MOF), MIL-101, was synthesized in the presence of sulfated zirconia (SZ) to produce acidic SZ/MIL-101 composites for the first time. The composites were characterized with XRD, nitrogen adsorption, FT-IR, scanning electron microscope, chemical analysis and so on. The composites (SZ/MIL-101s) were successfully applied in a liquid-phase esterification for a high yield of ester. This catalytic result of SZ/MIL-101, compared with that of pure SZ or MIL-101 (showing a negligible yield of ester), suggests that the SZ in the composite is highly active in the acid catalysis probably because of the well-dispersed active species of SZ. Moreover, the esterification is catalyzed in heterogeneous mode as confirmed by negligible esterification after filtration of the catalyst. Finally, microwaves can be efficiently applied both in the synthesis of the composites and the esterification reaction to accelerate the two processes of synthesis and esterification by about 5 times.

  17. Preparation of a Composite of Sulfated Zirconia/Metal Organic Framework and its Application in Esterification Reaction

    International Nuclear Information System (INIS)

    Park, Eun Young; Hasan, Zubair; Ahmed, Imteaz; Jhung, Sung Hwa

    2014-01-01

    A porous metal-organic framework (MOF), MIL-101, was synthesized in the presence of sulfated zirconia (SZ) to produce acidic SZ/MIL-101 composites for the first time. The composites were characterized with XRD, nitrogen adsorption, FT-IR, scanning electron microscope, chemical analysis and so on. The composites (SZ/MIL-101s) were successfully applied in a liquid-phase esterification for a high yield of ester. This catalytic result of SZ/MIL-101, compared with that of pure SZ or MIL-101 (showing a negligible yield of ester), suggests that the SZ in the composite is highly active in the acid catalysis probably because of the well-dispersed active species of SZ. Moreover, the esterification is catalyzed in heterogeneous mode as confirmed by negligible esterification after filtration of the catalyst. Finally, microwaves can be efficiently applied both in the synthesis of the composites and the esterification reaction to accelerate the two processes of synthesis and esterification by about 5 times

  18. A soft tissue adhesive based on aldehyde-sodium alginate and amino-carboxymethyl chitosan preparation through the Schiff reaction

    Science.gov (United States)

    Wu, Yu; Yuan, Liu; Sheng, Nai-an; Gu, Zi-qi; Feng, Wen-hao; Yin, Hai-yue; Morsi, Yosry; Mo, Xiu-mei

    2017-09-01

    Sodium alginate and carboxymethyl chitosan have been extensively applied in tissue engineering and other relative fields due to their low price and excellent biocompatibility. In this paper, we oxidized sodium alginate with sodium periodate to convert 1,2-hydroxyl groups into aldehyde groups to get aldehyde-sodium alginate (ASA). Carboxymethyl chitosan was modified with ethylenediamine (ED) in the presence of water-soluble N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDC) to introduce additional amino groups to get amino-carboxymethyl chitosan (A-CS). Upon mixing the A-SA and A-CS aqueous solutions together, a gel rapidly formed based on the Schiff's base reaction between aldehyde groups in A-SA and amino groups in A-CS. FTIR analysis confirmed the characteristic peak of Schiff's base group in the hydrogel. It was confirmed that the gelation time be dependent on the aldehyde group content in A-SA and amino group content in A-CS. The fasted hydrogel formation takes place within 10 min. The data of bonding strength and cytotoxicity measurement also showed that the hydrogel had good adhesion and biocompatibility. All these results support that this gel has the potential as soft tissue adhesive.

  19. Preparation and characterization of biopolymers comprising chitosan-grafted-ENR via acid-induced reaction of ENR50 with chitosan

    Directory of Open Access Journals (Sweden)

    M. R. H. Mas Haris

    2014-02-01

    Full Text Available This paper describes the first detailed tailored-approach for the preparation of biopolymers comprising chitosan (CTS grafted onto the backbone of epoxidized natural rubber (CTS-g-ENR. In a typical experiment, appropriate amount of CTS and AlCl3•6H2O was added to a specified amount of ENR50 (ENR with about 50% epoxy content dissolved in a dual-solvent consisting of 1,4-dioxane and water (97.5:2.5% v/v and the resulting mixture refluxed with continuous stirring for 6 hours. Nuclear magnetic resonance (NMR spectral analysis of a biocomposite, CTS-g-ENR-P1, revealed that its epoxy content is 22.36% which is considerably lower than 44.93% as determined for ENR50-control (ENR50 derivative obtained under similar experimental condition but in the absence of CTS. This means that the grafting of CTS onto the backbone of ENR had occurred. The revelation is affirmed by the presence of the characteristic absorption bands of CTS and ENR, and the appearance of new bands at 1219, 902 and 733 cm–1 in the Fourier transform infrared (FTIR spectrum of CTS-g-ENR-P1. Further evidence that CTS had been successfully grafted onto the backbone of ENR can be deduced and described in this paper from the data obtained by means of Differential Scanning Calorimetric analysis, Thermogravimetric analysis and Variable Pressure Scanning Electron Microscopy.

  20. Highly Stretchable and Conductive Silver Nanoparticle Embedded Graphene Flake Electrode Prepared by In situ Dual Reduction Reaction

    Science.gov (United States)

    Yoon, Yeoheung; Samanta, Khokan; Lee, Hanleem; Lee, Keunsik; Tiwari, Anand P.; Lee, Jihun; Yang, Junghee; Lee, Hyoyoung

    2015-09-01

    The emergence of stretchable devices that combine with conductive properties offers new exciting opportunities for wearable applications. Here, a novel, convenient and inexpensive solution process was demonstrated to prepare in situ silver (Ag) or platinum (Pt) nanoparticles (NPs)-embedded rGO hybrid materials using formic acid duality in the presence of AgNO3 or H2PtCl6 at low temperature. The reduction duality of the formic acid can convert graphene oxide (GO) to rGO and simultaneously deposit the positively charged metal ion to metal NP on rGO while the formic acid itself is converted to a CO2 evolving gas that is eco-friendly. The AgNP-embedded rGO hybrid electrode on an elastomeric substrate exhibited superior stretchable properties including a maximum conductivity of 3012 S cm-1 (at 0 % strain) and 322.8 S cm-1 (at 35 % strain). Its fabrication process using a printing method is scalable. Surprisingly, the electrode can survive even in continuous stretching cycles.

  1. Preparation, characterization of Mo catalysts supported on Ni- containing calcium deficient hydroxyapatite and reactivity for the thiophene HDS reaction

    Directory of Open Access Journals (Sweden)

    Cherif A.

    2013-09-01

    Full Text Available Ni-containing Calcium Hydroxyapatite (NiCaHAp; 3.31 wt.% Ni was synthesized by coprecipitation and used as catalyst support. Molybdenum was supported on NiCaHAp by impregnation using ammonium heptamolybdate. The prepared catalysts Mo(x/NiCaHAp (x: 2 to 8 wt % in Mo were characterized by elemental analysis, XRD, FT-IR, N2 adsorption-desorption and TEM-EDX. The catalysts were sulfided in-situ at 673 K under flowing H2S/H2 (15 Vol.% H2S and tested in hydrodesulfurization (HDS of thiophene at 673 K. The main XRD peaks of hydroxyapatite CaHAp phase were observed in all samples and a peak due probably to crystalline MoO3 phase was also identified from the results. However, no crystalline phase of NiO was found for the catalysts, which showed its Ni species were highly dispersed. The sulfided catalysts Mo(x/NiCaHAp presented are active in HDS of thiophene, despite the presence of some large MoO3 crystallites and incomplete sulfidation. This activity may be due to interaction of NiO and MoO3 on CaHAp resulting in the formation of Ni-Mo-S phase under flowing H2S/H2. When the molybdenum content increased the HDS activity increasead slightly, which was caused by the agglomeration of MoO3. The Mo(8/NiCaHAp catalyst is about two times less active for thiophene HDS than the commercial NiMoP/Al2O3.

  2. White cast iron with a nano-eutectic microstructure and high tensile strength and considerable ductility prepared by an aluminothermic reaction casting

    International Nuclear Information System (INIS)

    La, Peiqing; Wei, Fuan; Hu, Sulei; Li, Cuiling; Wei, Yupeng

    2013-01-01

    A white cast iron with nano-eutectic microstructure was prepared by an aluminothermic reaction casting. Microstructures of the cast iron were investigated by optical microscope (OM), electron probe micro-analyzer (EPMA), scanning electron microscope (SEM) and X-ray diffraction (XRD). Mechanical properties of the cast iron were tested. The results showed that the cast iron consisted of pearlite and cementite phases. Lamellar spacing of the pearlite phase was in a range of 110–275 nm and much smaller than that of the Ni-Hard 2 cast iron. Hardness of the cast iron was 552 Hv, tensile strength was 383 MPa, total elongation was 3% and compressive strength was 2224 MPa. Tensile strength and hardness of the cast iron was same to Ni-Hard 2 cast iron, besides the ductility was much better than that of the Ni-Hard 2 cast iron which is much expensive than the cast iron.

  3. Phosphorescent and thermoluminescent properties of SrAl2O4:Eu2+, Dy3+ phosphors prepared by solid state reaction method

    International Nuclear Information System (INIS)

    Mothudi, B.M.; Ntwaeaborwa, O.M.; Kumar, A.; Sohn, K.; Swart, H.C.

    2012-01-01

    Long persistent SrAl 2 O 4 :Eu 2+ phosphors co-doped with Dy 3+ were prepared by the solid state reaction method. The main diffraction peaks of the monoclinic structure of SrAl 2 O 4 were observed in all the samples. The broad band emission spectra at 497 nm for SrAl 2 O 4 :Eu 2+ , Dy 3+ were observed and the emission is attributed to the 4f 6 5d 1 to 4f 7 transition of Eu 2+ ions. The samples annealed at 1100–1200 °C showed similar broad TL glow curves centered at 120 °C. The similar TL glow curves suggest that the traps responsible for them are similar. The long afterglow displayed by the phosphors annealed at different temperatures, may be attributed to the Dy 3+ ions acting as the hole trap levels, which play an important role in prolonging the duration of luminescence.

  4. New process of the preparation of catalyzed gas diffusion electrode for PEM fuel cells based on ultrasonic direct solution spray reaction method

    Energy Technology Data Exchange (ETDEWEB)

    Oishi, K.; Savadogo, O. [Ecole Polytechnique de Montreal, Montreal, PQ (Canada). Laboratoire de nouveaux materiaux pour l' energie et l' electrochimie

    2008-07-01

    This paper reported on a newly developed process for in-situ catalyst deposition on gas diffusion electrodes (GDE) for polymer electrolyte fuel cells. This process has the potential to reduce the number of steps for catalyzed GDE fabrication. In addition, the process offers economic advantages for the fuel cell commercialization. In this study, a home-made catalyst maker with ultrasonic spray method was used to prepare a solution of the carbon supported platinum catalyst on the GDL. The sprayed catalyst powder consisted of carbon support. The catalyst particles did not prevent gas flow channels on the GDL. The catalyst layer was shown to be located only on the top surface of the GDL and was not packed into its flow channel. Results of Cross-section SEM image, crystallization, micro structure and electro-catalytic activity for the oxygen reduction reaction were also discussed. 1 ref., 1 fig.

  5. Preparation of nickel ferrite/carbon nanotubes composite by microwave irradiation technique for use as catalyst in photo-fenton reaction

    Energy Technology Data Exchange (ETDEWEB)

    Foletto, E.L.; Rigo, C.; Severo, E.C.; Mazutti, M.A.; Dotto, G.L.; Jahn, S.L.; Sales, J.C. [Universidade Federal de Santa Maria (UFSM), RS (Brazil); Chiavone-Filho, O. [Universidade Federal do Rio Grande do Sul (UFRGS), RS (Brazil); Gundel, A.; Lucchese, M. [Universidade Federal do Pampa (UNIPAMPA), Bage, RS (Brazil)

    2016-07-01

    Full text: Nickel ferrite/multi-walled carbon nanotubes (NiFe2O4/MWCNTs) composite has been rapidly synthesized via microwave irradiation technique. The structural properties of the formed product was investigated by X-ray diffraction (XRD), N2 adsorption/desorption isotherms, thermogravimetric analysis (TGA), Raman spectroscopy and, scanning electron microscopy (SEM). The catalytic behavior of composite material was evaluated by the degradation of Amaranth dye in the photo-Fenton reaction under visible light irradiation. The overall results showed that the prepared composite was successfully synthesized, demonstrating good performance in the dye degradation, with higher degradation rate compared to the NiFe2O4. The high efficiency in dye degradation can be attributed to synergism between NiFe2O4 and MWCNTs. Therefore, NiFe2O4/MWCNTs composite can be used as promising photo-Fenton catalyst to degrade Amaranth dye from aqueous solutions. (author)

  6. The role of MgCl2 compounds in preparation of Tin oxide micro particles by one-step solid - state chemical reaction method and characterization of microstructure

    International Nuclear Information System (INIS)

    Hojabry, A.; Rezainik, Y.; Abdoljavad, N.; Moghimi, N.; Shakib, M.

    2007-01-01

    In this paper, Tin oxide (SnO 2 ) nano crystals have been synthesized by one-step solid-state chemical reactions method. In the first step, the powder of SnCl 4 . 5H 2 O was mixed with MgCl 2 and Mg(OH) 2 with a weight ratio of Sn to Mg (2:1) in the air atmosphere at room, and then annealed at 200 d egree C , 400 d egree C and 600 d egree C in air for 4 h to give different size of nanoparticles. This method is a simple, efficient and economic preparation for SnO 2 nanoparticles with adjustable grain sizes in the range of 7-32 nm in high yield. The microstructure and morphology of SnO 2 nanoparticles have been studied by X-ray diffraction (XRD), scanning electron microscopy and thermal analysis (thermogravimetric analysis -differential thermal analysis).

  7. Preparation of Cu{sub 2}ZnSnS{sub 4} thin films by sulfurizing stacked precursor thin films via successive ionic layer adsorption and reaction method

    Energy Technology Data Exchange (ETDEWEB)

    Su Zhenghua; Yan Chang; Sun Kaiwen; Han Zili [School of Metallurgical Science and Engineering, Central South University, Changsha 410083 (China); Liu Fangyang, E-mail: liufangyang@csu.edu.cn [School of Metallurgical Science and Engineering, Central South University, Changsha 410083 (China); Liu Jin [School of Metallurgical Science and Engineering, Central South University, Changsha 410083 (China); Lai Yanqing, E-mail: laiyanqingcsu@163.com [School of Metallurgical Science and Engineering, Central South University, Changsha 410083 (China); Li Jie; Liu Yexiang [School of Metallurgical Science and Engineering, Central South University, Changsha 410083 (China)

    2012-07-15

    Earth-abundant Cu{sub 2}ZnSnS{sub 4} is a promising alternative photovoltaic material which has been examined as absorber layer of thin film solar cells. In this study, Cu{sub 2}ZnSnS{sub 4} (CZTS) thin films have been successfully fabricated by sulfurizing stacked precursor thin films via successive ionic layer adsorption and reaction (SILAR) method. The prepared CZTS thin films have been characterized by X-ray diffraction, energy dispersive spectrometer, Raman spectroscopy, UV-vis spectroscopy, Hall effect measurements and photoelectrochemical tests. Results reveal that the thin films have kesterite structured Cu{sub 2}ZnSnS{sub 4} and the p-type conductivity with a carrier concentration in the order of 10{sup 18} cm{sup -3} and an optical band gap of 1.5 eV, which are suitable for applications in thin film solar cells.

  8. Studies on the Luminescence Properties of CaZrO3:Eu3+ Phosphors Prepared by the Solid State Reaction Method

    OpenAIRE

    Sahu, Ishwar Prasad; Bisen, D.P.; Tamrakar, R.K.; Murthy, K.V.R.; Mohapatra, M.

    2017-01-01

    CaZrO3:xEu3+ (x = 1.0, 2.0, 3.0, 4.0, and 5.0 mol%) phosphors were successfully prepared by a solid state reaction method. The crystal structure of sintered phosphors was hexagonal phase with space group of Pm-3m. The near ultra-violet (NUV) excitation, emission spectra of the CaZrO3:xEu3+ phosphors were composed of sharp line emission associated with the transitions from the excited states 5D0 to the ground state 7Fj (j = 0, 1, 2, 3, 4) of Eu3+. The results indicated that CaZrO3:xEu3+ might ...

  9. Cutaneous adverse drug reactions

    African Journals Online (AJOL)

    CADRs).1 ... patient's management is thought to be responsible for the reaction. Some clinical ... In SJS/TEN hypotension, diarrhoea, hypothermia and confusion suggest ... and a pain management team, centred around a good core of experienced ...

  10. Preparation of diatomite/Ca(OH){sub 2} sorbents and modelling their sulphation reaction Istanbul Technical University, Istanbul (Turkey). Chemical and Metallurgical Engineering Faculty

    Energy Technology Data Exchange (ETDEWEB)

    Nilgun Karatepe; Nilufer Erdoan; Aysegul Ersoy-Mericboyu; Sadriye Kucukbayrak

    2004-09-01

    Mixtures of Ca(OH){sub 2} and diatomite were hydrated at different conditions to produce reactive SO{sub 2} sorbents. Two different hydration techniques were used; namely, atmospheric and pressure hydration. The effect of the hydration temperature, time and diatomite/Ca(OH){sub 2} weight ratio on the physical properties of the activated sorbents were investigated. In atmospheric hydration, it was found that increasing the temperature and hydration time caused an increase in the total surface area of the sorbents. However, surface area values of the sorbents prepared from mixtures which have different diatomite/Ca(OH){sub 2} weight ratio were generally not changed significantly. In pressure hydration, the surface area of the activated sorbents was positively affected from the hydration temperature and pressure. Finally, Ca(OH){sub 2} and two diatomite/Ca(OH){sub 2} sorbents were sulphated at constant temperature (338 K) using a synthetic gaseous mixture consisting of 5% O{sub 2}, 10% CO{sub 2}, 5000 ppm SO{sub 2} and the balance of nitrogen with a 55% relative humidity. The sulphation reaction of these sorbents were investigated and modelled. The unreacted shrinking core model was chosen to describe this non-catalytic solid/gas (hydrated sorbent/SO{sub 2}) reaction mechanism. The experimental results were found to be correlated successfully by this model.

  11. Refining cocoon to prepare (N, S, and Fe) ternary-doped porous carbon aerogel as efficient catalyst for the oxygen reduction reaction in alkaline medium

    Science.gov (United States)

    Li, Changqing; Sun, Fengzhan; Lin, Yuqing

    2018-04-01

    Various advanced sulfur doped Fe-N-C non-noble metal catalysts of oxygen reduction reaction (ORR) have been recently designed and reported with excellent catalytic activity. Herein, we refined cocoon with several steps to form silk fibroin solution, treated with iron salt to prepare an easy available, heteroatom (N, S, and Fe) ternary-doped, porous carbon aerogel (HDCA). Heteroatom existed in organic compounds in silk fibroin endow active site for ORR of the resultant carbon frameworks. Moreover, the amino acids presented in silk fibroin acted as ligands, functioning with Fe ions to form FeNx coordination compounds, which also served as active sites towards ORR. The synthesized HDCA electrocatalysts, especially HDCA-800 (obtained at 800 °C) displayed excellent catalytic activity with onsets, half-wave potential of 0.94 V, 0.79 V and higher limited current density of 3.80 mA cm-2 through a near four-electron reduction pathway with an average electron transferred number of 3.86, making them promising alternatives for state-of-the-art ORR electrocatalysts in fuel cell field. The porous structure with synergistic effect of N and S heteroatom doping has been proposed to play a key role in facilitating the desired ORR reaction.

  12. Facile preparation of three-dimensional Co1-xS/sulfur and nitrogen-codoped graphene/carbon foam for highly efficient oxygen reduction reaction

    Science.gov (United States)

    Liang, Hui; Li, Chenwei; Chen, Tao; Cui, Liang; Han, Jingrui; Peng, Zhi; Liu, Jingquan

    2018-02-01

    Because of the urgent need for renewable resources, oxygen reduction reaction (ORR) has been widely studied. Finding efficient and low cost non-precious metal catalyst is increasingly critical. In this study, melamine foam is used as template to obtain porous sulfur and nitrogen-codoped graphene/carbon foam with uniformly distributed cobalt sulfide nanoparticles (Co1-xS/SNG/CF) which is prepared by a simple infiltration-drying-sulfuration method. It is noteworthy that melamine foam not only works as a three-dimensional support skeleton, but also provides a nitrogen source without any environmental pollution. Such Co1-xS/SNG/CF catalyst shows excellent oxygen reduction catalytic performance with an onset potential of only 0.99 V, which is the same as that of Pt/C catalyst (Eonset = 0.99 V). Furthermore, the stability and methanol tolerance of Co1-xS/SNG/CF are more outstanding than those of Pt/C catalyst. Our work manifests a facile method to prepare S and N-codoped 3D graphene network decorated with Co1-xS nanoparticles, which may be utilized as potential alternative to the expensive Pt/C catalysts toward ORR.

  13. Co-Production of Ethanol and 1,2-Propanediol via Glycerol Hydrogenolysis Using Ni/Ce–Mg Catalysts: Effects of Catalyst Preparation and Reaction Conditions

    Directory of Open Access Journals (Sweden)

    Russel N. Menchavez

    2017-09-01

    Full Text Available Crude glycerol from biodiesel production is a biobased material capable of co-producing biofuels and chemicals. This study aimed to develop a line of Ni catalysts supported on cerium–magnesium (Ce–Mg to improve the process efficiency of glycerol hydrogenolysis for ethanol and 1,2-propanediol (1,2-PDO. Results showed that catalytic activity was greatly improved by changing the preparation method from impregnation to deposition precipitation (DP, and by adjusting calcination temperatures. Prepared via DP, the catalysts of 25 wt % Ni supported on Ce–Mg (9:1 mol/mol greatly improved the effectiveness in glycerol conversion while maintaining the selectivities to ethanol and 1,2-PDO. Calcination at 350 °C provided the catalysts better selectivities of 15.61% to ethanol and 67.93% to 1,2-PDO. Increases in reaction temperature and time improved the conversion of glycerol and the selectivity to ethanol, but reduced the selectivity to 1,2-PDO. A lower initial water content led to a higher conversion of glycerol, but lower selectivities to ethanol and 1,2-PDO. Higher hydrogen application affected the glycerol conversion rate positively, but the selectivities to ethanol and 1,2-PDO negatively. A comparison to the commercial Raney® Ni catalyst showed that the Ni/Ce–Mg catalyst developed in this study showed a better potential for the selective co-production of ethanol and 1,2-PDO from glycerol hydrogenolysis.

  14. Facile preparation of efficient electrocatalysts for oxygen reduction reaction: One-dimensional meso/macroporous cobalt and nitrogen Co-doped carbon nanofibers

    Science.gov (United States)

    Yoon, Ki Ro; Choi, Jinho; Cho, Su-Ho; Jung, Ji-Won; Kim, Chanhoon; Cheong, Jun Young; Kim, Il-Doo

    2018-03-01

    Efficient electrocatalyst for oxygen reduction reaction (ORR) is an essential component for stable operation of various sustainable energy conversion and storage systems such as fuel cells and metal-air batteries. Herein, we report a facile preparation of meso/macroporous Co and N co-doped carbon nanofibers (Co-Nx@CNFs) as a high performance and cost-effective electrocatalyst toward ORR. Co-Nx@CNFs are simply obtained from electrospinning of Co precursor and bicomponent polymers (PVP/PAN) followed by temperature controlled carbonization and further activation step. The prepared Co-Nx@CNF catalyst carbonized at 700 °C (Co-Nx@CNF700) shows outstanding ORR performance, i.e., a low onset potential (0.941 V) and half wave potential (0.814 V) with almost four-electron transfer pathways (n= 3.9). In addition, Co-Nx@CNF700 exhibits a superior methanol tolerance and higher stability (>70 h) in Zn-air battery in comparison with Pt/C catalyst (∼30 h). The outstanding performance of Co-Nx@CNF700 catalysts is attributed to i) enlarged surface area with bimodal porosity achieved by leaching of inactive species, ii) increase of exposed ORR active Co-Nx moieties and graphitic edge sites, and iii) enhanced electrical conductivity and corrosion resistance due to the existence of numerous graphitic flakes in carbon matrix.

  15. Preparation of acid-base bifunctional mesoporous KIT-6 (KIT: Korea Advanced Institute of Science and Technology) and its catalytic performance in Knoevenagel reaction

    International Nuclear Information System (INIS)

    Xu, Ling; Wang, Chunhua; Guan, Jingqi

    2014-01-01

    Acid-base bifunctional mesoporous catalysts Al-KIT-6-NH 2 containing different aluminum content have been synthesized through post synthetic grafting method. The materials were characterized by X-ray diffraction (XRD), scanning electron micrographs (SEM), transmission electron micrographs (TEM), Fourier-transform infrared spectroscopy (FTIR), IR spectra of pyridine adsorption, NH 3 -TPD and TG analysis. The characterization results indicated that the pore structure of KIT-6 was well kept after the addition of aluminum and grafting of aminopropyl groups. The acid amount of Al-KIT-6 increased with enhancing aluminum content. Catalytic results showed that weak acid and weak base favor the Knoevenagel reaction, while catalysts with strong acid and weak base exhibited worse catalytic behavior. - Graphical abstract: The postulated steps of mechanism for the acid-base catalyzed process are as follows: (1) the aldehyde gets activated by the surface acidic sites which allow the amine undergoes nucleophilic to attack the carbonyl carbon of benzaldehyde. (2) Water is released in the formation of imine intermediate. (3) The ethyl cyanoacetate reacts with the intermediate. (4) The benzylidene ethyl cyanoacetate is formed and the amine is regenerated. - Highlights: • KIT-6 and Al-KIT-6-NH 2 with different Si/Al ratios has been successfully prepared. • 79.4% Yield was obtained over 46-Al-KIT-6-NH 2 within 20 min in Knoevenagel reaction. • Low Al-content Al-KIT-6-NH 2 shows better catalytic stability than high Al-content catalysts. • There is acid-base synergistic effect in Knoevenagel reaction

  16. Preparation of acid-base bifunctional mesoporous KIT-6 (KIT: Korea Advanced Institute of Science and Technology) and its catalytic performance in Knoevenagel reaction

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Ling [College of Chemistry and Chemical Engineering, Inner Mongolia University for Nationalities, Tongliao 028000 (China); Wang, Chunhua [Key Laboratory of Surface and Interface Chemistry of Jilin Province, College of Chemistry, Jilin University, Changchun 130023 (China); Guan, Jingqi, E-mail: guanjq@jlu.edu.cn [Key Laboratory of Surface and Interface Chemistry of Jilin Province, College of Chemistry, Jilin University, Changchun 130023 (China)

    2014-05-01

    Acid-base bifunctional mesoporous catalysts Al-KIT-6-NH{sub 2} containing different aluminum content have been synthesized through post synthetic grafting method. The materials were characterized by X-ray diffraction (XRD), scanning electron micrographs (SEM), transmission electron micrographs (TEM), Fourier-transform infrared spectroscopy (FTIR), IR spectra of pyridine adsorption, NH{sub 3}-TPD and TG analysis. The characterization results indicated that the pore structure of KIT-6 was well kept after the addition of aluminum and grafting of aminopropyl groups. The acid amount of Al-KIT-6 increased with enhancing aluminum content. Catalytic results showed that weak acid and weak base favor the Knoevenagel reaction, while catalysts with strong acid and weak base exhibited worse catalytic behavior. - Graphical abstract: The postulated steps of mechanism for the acid-base catalyzed process are as follows: (1) the aldehyde gets activated by the surface acidic sites which allow the amine undergoes nucleophilic to attack the carbonyl carbon of benzaldehyde. (2) Water is released in the formation of imine intermediate. (3) The ethyl cyanoacetate reacts with the intermediate. (4) The benzylidene ethyl cyanoacetate is formed and the amine is regenerated. - Highlights: • KIT-6 and Al-KIT-6-NH{sub 2} with different Si/Al ratios has been successfully prepared. • 79.4% Yield was obtained over 46-Al-KIT-6-NH{sub 2} within 20 min in Knoevenagel reaction. • Low Al-content Al-KIT-6-NH{sub 2} shows better catalytic stability than high Al-content catalysts. • There is acid-base synergistic effect in Knoevenagel reaction.

  17. Effect of Precursors on Key Opto-electrical Properties of Successive Ion Layer Adsorption and Reaction-Prepared Al:ZnO Thin Films

    Science.gov (United States)

    Kumar, K. Deva Arun; Valanarasu, S.; Ganesh, V.; Shkir, Mohd.; Kathalingam, A.; AlFaify, S.

    2018-02-01

    Aluminum-doped zinc oxide (Al:ZnO) thin films were deposited on glass substrates by successive ion layer adsorption and reaction (SILAR) method using different precursors. This inexpensive SILAR method involves dipping of substrate sequentially in zinc solution, de-ionized water and ethylene glycol in multiple cycles. Prepared films were investigated by x-ray diffraction (XRD), scanning electron microscope (SEM), atomic force microscope (AFM), optical absorption, photoluminescence (PL), Raman spectroscopy and electrical studies. XRD study confirmed incorporation of aluminum in ZnO lattice with a polycrystalline hexagonal wurtzite structure of the films. The crystallite size determined by the Scherrer equation showed an increase from 28 nm to 35 nm for samples S1 to S4, respectively. SEM study showed smooth morphology with homogeneous distribution of particles. From the AFM images, the surface roughness was found to change according to precursors. For the optical analysis, the zinc chloride precursor showed high optical transmittance of about 90% in the visible range with a band gap value 3.15 eV. The room-temperature PL spectra exhibited a stronger violet emission peak at 420 nm for all the prepared samples. The Raman spectra showed a peak around 435 cm-1 which could be assigned to non-polar optical phonons (E2-high) mode AZO films of a ZnO wurtzite structure. Hall effect measurements showed n-type conductivity with low resistivity ( ρ) and high carrier concentrations ( n) of 2.39 × 10-3 Ω-cm and 8.96 × 1020 cm-3, respectively, for the film deposited using zinc chloride as precursor. The above properties make the prepared AZO film to be regarded as a very promising electrode material for fabrication of optoelectronic devices.

  18. Tuning crystal phase of NiS_x through electro-oxidized nickel foam: A novel route for preparing efficient electrocatalysts for oxygen evolution reaction

    International Nuclear Information System (INIS)

    Li, Xiao; Shang, Xiao; Rao, Yi; Dong, Bin; Han, Guan-Qun; Hu, Wen-Hui; Liu, Yan-Ru; Yan, Kai-Li; Chi, Jing-Qi; Chai, Yong-Ming; Liu, Chen-Guang

    2017-01-01

    Highlights: • Electro-oxidized nickel foam as a support has been used to prepare NiS_x phases. • Ni(OH)_2 layer on electro-oxidized NF is responsible for the growth of β-NiS. • NiS_x/NF(Ox) composed of β-NiS and Ni_3S_2 has enhanced electrocatalytic activity. • The growth mechanisms of mixed NiS_x phases of NiS_x/NF(Ox) have been discussed. - Abstract: A facile solvothermal sulfurization using electro-oxidized nickel foam (NF(Ox)) as support has been applied to prepare NiS_x/NF(Ox) electrocatalyst with highly efficient activity for oxygen evolution reaction (OER). XRD patterns confirm the composition of NiS_x/NF(Ox): two kinds of crystal phase including β-NiS and Ni_3S_2. While using bare NF as support under identical conditions, only Ni_3S_2 phase can be detected. SEM images reveal two kinds of morphologies of NiS_x/NF(Ox) including pyramids structure of β-NiS and nanorod-like structure of Ni_3S_2, which implies the tuning effect of electro-pretreatment of NF on the selective preparation of NiS_x crystal phase. It can be speculated that Ni(OH)_2 layer derived from electro-oxidized NF is responsible for the growth of β-NiS while metallic Ni is transformed into Ni_2S_3 during sulfurization. Electrochemical measurements for OER indicate the enhanced electrocatalytic activity of NiS_x/NF(Ox) with a small overpotential of 72 mV to reach 10 mA cm"−"2 compared with Ni_3S_2/NF, which may be ascribed to the improved electron-transfer kinetics relating to the unique atomic configurations and crystalline structures of β-NiS. The electro-oxidation pretreatment of nickel foam provides a simple and convenient method by tuning different NiS_x crystal phases for preparing excellent OER eletrocatalysts.

  19. Tuning crystal phase of NiS{sub x} through electro-oxidized nickel foam: A novel route for preparing efficient electrocatalysts for oxygen evolution reaction

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xiao; Shang, Xiao [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China); Rao, Yi [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China); College of Science, China University of Petroleum (East China), Qingdao 266580, PR China (China); Dong, Bin, E-mail: dongbin@upc.edu.cn [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China); College of Science, China University of Petroleum (East China), Qingdao 266580, PR China (China); Han, Guan-Qun [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China); College of Science, China University of Petroleum (East China), Qingdao 266580, PR China (China); Hu, Wen-Hui; Liu, Yan-Ru; Yan, Kai-Li; Chi, Jing-Qi; Chai, Yong-Ming [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China); Liu, Chen-Guang, E-mail: cgliu@upc.edu.cn [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China)

    2017-02-28

    Highlights: • Electro-oxidized nickel foam as a support has been used to prepare NiS{sub x} phases. • Ni(OH){sub 2} layer on electro-oxidized NF is responsible for the growth of β-NiS. • NiS{sub x}/NF(Ox) composed of β-NiS and Ni{sub 3}S{sub 2} has enhanced electrocatalytic activity. • The growth mechanisms of mixed NiS{sub x} phases of NiS{sub x}/NF(Ox) have been discussed. - Abstract: A facile solvothermal sulfurization using electro-oxidized nickel foam (NF(Ox)) as support has been applied to prepare NiS{sub x}/NF(Ox) electrocatalyst with highly efficient activity for oxygen evolution reaction (OER). XRD patterns confirm the composition of NiS{sub x}/NF(Ox): two kinds of crystal phase including β-NiS and Ni{sub 3}S{sub 2}. While using bare NF as support under identical conditions, only Ni{sub 3}S{sub 2} phase can be detected. SEM images reveal two kinds of morphologies of NiS{sub x}/NF(Ox) including pyramids structure of β-NiS and nanorod-like structure of Ni{sub 3}S{sub 2}, which implies the tuning effect of electro-pretreatment of NF on the selective preparation of NiS{sub x} crystal phase. It can be speculated that Ni(OH){sub 2} layer derived from electro-oxidized NF is responsible for the growth of β-NiS while metallic Ni is transformed into Ni{sub 2}S{sub 3} during sulfurization. Electrochemical measurements for OER indicate the enhanced electrocatalytic activity of NiS{sub x}/NF(Ox) with a small overpotential of 72 mV to reach 10 mA cm{sup −2} compared with Ni{sub 3}S{sub 2}/NF, which may be ascribed to the improved electron-transfer kinetics relating to the unique atomic configurations and crystalline structures of β-NiS. The electro-oxidation pretreatment of nickel foam provides a simple and convenient method by tuning different NiS{sub x} crystal phases for preparing excellent OER eletrocatalysts.

  20. Preparation of 13X from Waste Quartz and Photocatalytic Reaction of Methyl Orange on TiO2/ZSM-5, 13X and Y-Zeolite.

    Science.gov (United States)

    Wang, Jia-Jie; Jing, You-Hai; Ouyang, Tong; Chang, Chang-Tang

    2015-08-01

    TiO2 photocatalytic reactions not only remove a variety of organic pollutants via complete mineralization, but also destroy the bacterial cell wall and cell membrane, thus playing an important bactericidal role. However, the post-filtration procedures to separate nanometer-levels of TiO2 and the gradual inactivity of photocatalyst during continuous use are defects that limit its application. In this case, we propose loading TiO2 on zeolite for easy separation and 13X is considered as a promising one. In our study, 13X-zeolite was prepared by a hydrothermal method and the source of Si was extracted from waste quartz sand. For comparison, commercial zeolite with different microporous and mesoporous diameters (ZSM-5 and Y-zeolites) were also used as TiO2 supports. The pore size of the three kinds of zeolites are as follows: Y-zeolite > 13X > ZSM-5. Different TiO2 loading content over ZSM-5, 13X and Y-zeolite were prepared by the sol-gel method. XRD, FTIR, BET, UV-vis, TGA and SEM were used for investigation of material characteristics. In addition, the efficiencies of mineralization and photodegradation were studied in this paper. The effects of the loading ratio of TiO2 over zeolites, initial pH, and concentration on photocatalytic performance are investigated. The relationship between best loading content of TiO2 and pore size of the zeolite was studied. The possible roles of the ZSM-5, 13X-zeolites and Y-zeolites support on the reactions and the possible mechanisms of effects were also explored. The best loading content of TiO2 over ZSM-5, 13X and Y-zeolite was found to be 50 wt%, 12.5 wt% and 7 wt%, respectively. The optimum pH condition is 3 with TiO2 over ZSM-5, 13X-zeolites and Y-zeolites. The results showed that the degradation and mineralization efficiency of 12.5 wt%GT13X (TiO2 over 13X) after 90 min irradiation reached 57.9% and 22.0%, which was better than that of 7 wt%GTYZ (TiO2 over Y-zeolites) while much lower than that of 50 wt%GTZ (TiO2 over ZSM-5

  1. Insertion reactions into Pd[bond]O and Pd[bond]N bonds: preparation of alkoxycarbonyl, carbonato, carbamato, thiocarbamate, and thioureide complexes of palladium(II).

    Science.gov (United States)

    Ruiz, José; Martínez, M Teresa; Florenciano, Félix; Rodríguez, Venancio; López, Gregorio; Pérez, José; Chaloner, Penny A; Hitchcock, Peter B

    2003-06-02

    Mononuclear palladium hydroxo complexes of the type [Pd(N[bond]N)(C(6)F(5))(OH)] [(N[bond]N = 2,2'-bipyridine (bipy), 4,4'-dimethyl-2,2'-bipyridine (Me(2)bipy), 1,10-phenanthroline (phen), or N,N,N',N'-tetramethylethylenediamine (tmeda)] have been prepared by reaction of [Pd(N[bond]N)(C(6)F(5))(acetone)]ClO(4) with KOH in methanol. These hydroxo complexes react, in methanol, with CO (1 atm, room temperature) to yield the corresponding methoxycarbonyl complexes [Pd(N[bond]N)(C(6)F(5))(CO(2)Me)]. Similar alkoxycarbonyl complexes [Pd(N[bond]N)(C(6)F(5))(CO(2)R)] (N[bond]N = bis(3,5-dimethylpyrazol-1-yl)methane); R = Me, Et, or (i)Pr) are obtained when [Pd(N[bond]N)(C(6)F(5))Cl] is treated with KOH in the corresponding alcohol ROH and CO is bubbled through the solution. The reactions of [Pd(N[bond]N)(C(6)F(5))(OH)] (N[bond]N = bipy or Me(2)bipy) with CO(2), in tetrahydrofuran, lead to the formation of the binuclear carbonate complexes [(N[bond]N)(C(6)F(5))Pd(mu-eta(2)-CO(3))Pd(C(6)F(5))(N[bond]N)]. Complexes [Pd(N[bond]N)(C(6)F(5))(OH)] react in alcohol with PhNCS to yield the corresponding N-phenyl-O-alkylthiocarbamate complexes [Pd(N[bond]N)(C(6)F(5))[SC(OR)NPh

  2. Using ionic liquid as the solvent to prepare Pd–Ni bimetallic nanoparticles by a pyrolysis method for ethanol oxidation reaction

    International Nuclear Information System (INIS)

    Ding, Keqiang; Yang, Hongwei; Cao, Yanli; Zheng, Chunbao; Rapole, Sowjanya B.; Guo, Zhanhu

    2013-01-01

    Room temperature ionic liquids (RTILs) of 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIBF4) is used as the solvent for the first time to prepare multi-walled carbon nanotubes (MWCNTs) supported nanocomposite catalysts of Pd x Ni y (atomic ratios of Pd to Ni are 1:1, 1:1.5, 1:2, and 1:2.5) nanoparticles (denoted as Pd x Ni y /MWCNTs) by using a simple pyrolysis process. The Pd x Ni y /MWCNTs catalysts are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Results show that the Pd x Ni y nanoparticles (NPs) are quite uniformly dispersed on the surface of MWCNTs with an average crystallite size of ∼7.0 nm. The electro-catalytic activity of the Pd x Ni y /MWCNTs catalysts for ethanol oxidation reaction (EOR) is examined by cyclic voltammetry (CV). It is revealed that the onset potential is ∼80 mV lower and the peak current is about three times higher for ethanol oxidation for MWCNT catalysts with Pd 1 Ni 1.5 compared to those of Pd/MWCNTs. The catalytic mechanisms of the Pd 1 Ni 1.5 /MWCNTs towards EOR are also proposed and discussed. - Highlights: • Introducing ionic liquids to the pyrolysis process for the preparation of Pd x Ni y nanoparticles. • Pd x Ni y nanoparticles with an average particle size of ∼7.0 nm were fabricated. • The peak current of EOR was about three times higher at Pd 1 Ni 1.5 compared to those of Pd

  3. Mochovce waste treatment centre

    International Nuclear Information System (INIS)

    Sedliak, D.; Endrody, J.

    2000-01-01

    The first unit of the Mochovce NPP (WWER 440 MW) was put in a test operation in October 1998. The second unit with the same power output was put in the test operation in March 2000. The Nuclear Regulatory Authority of the Slovak Republic in its Decision No. 318/98 of 28 October 1998, by which an agreement with the operation of the Unit 1 of the Mochovce. Nuclear Power Plant was issued, requires to start the construction of the Liquid Radioactive Waste Treatment Centre until January 2004. The subject of this presentation is a system description of the Liquid Radioactive Waste (LRW) management in the Mochovce NPP. The initial part is dedicated to a short description of the radioactive waste management legislation requirements. Then the presentation continues with an information about the LRW production in the Mochovce NPP, LRW sources, chemical and radiochemical attributes, description of storage. The presentation also provides real values of its production in a comparison with the design data. The LRW production minimization principles are also mentioned there. Another part deals with the basic requirements for the technology proposal of the liquid RW treatment, especially concerning the acceptance criteria at the Republic RW Repository Mochovce. The final part is devoted to a short description of the investment procedure principles - design preparation levels and a proposed construction schedule of the centre. (authors)

  4. Enhanced photovoltaic performance of CdS-sensitized inverted organic solar cells prepared via a successive ionic layer adsorption and reaction method

    Science.gov (United States)

    Oleiwi, Hind Fadhil; Zakaria, Azmi; Yap, Chi Chin; Abbas, Haidr Abdulzahra; Tan, Sin Tee; Lee, Hock Beng; Tan, Chun Hui; Ginting, Riski Titian; Alshanableh, Abdelelah; Talib, Zainal Abidin

    2017-05-01

    One-dimensional ZnO nanorods (ZNRs) synthesized on fluorine-doped tin oxide (FTO) glass by hydrothermal method were modified with cadmium sulfide quantum dots (CdS QDs) as an electron transport layer (ETL) in order to enhance the photovoltaic performance of inverted organic solar cell (IOSC). In present study, CdS QDs were deposited on ZNRs using a Successive Ionic Layer Adsorption and Reaction method (SILAR) method. In typical procedures, IOSCs were fabricated by spin-coating the P3HT:PC61BM photoactive layer onto the as-prepared ZNRs/CdS QDs. The results of current-voltage (I-V) measurement under illumination shows that the FTO/ZNRs/CdS QDs/ P3HT:PC61BM/ PEDOT: PSS/Ag IOSC achieved a higher power conversion efficiency (4.06 %) in comparison to FTO/ZNRs/P3HT:PC61BM/PEDOT: PSS/Ag (3.6 %). Our findings suggest that the improved open circuit voltage (Voc) and short circuit current density (Jsc) of ZNRs/CdS QDs devices could be attributed to enhanced electron selectivity and reduced interfacial charge carrier recombination between ZNRs and P3HT:PC61BM after the deposition of CdS QDs. The CdS QDs sensitized ZNRs reported herein exhibit great potential for advanced optoelectronic application.

  5. Studies on the luminescence properties of CaZrO3:Eu3+ phosphors prepared by the solid state reaction method

    Directory of Open Access Journals (Sweden)

    Ishwar Prasad Sahu

    2017-03-01

    Full Text Available CaZrO3:xEu3+ (x = 1.0, 2.0, 3.0, 4.0, and 5.0 mol% phosphors were successfully prepared by a solid state reaction method. The crystal structure of sintered phosphors was hexagonal phase with space group of Pm-3m. The near ultra-violet (NUV excitation, emission spectra of the CaZrO3:xEu3+ phosphors were composed of sharp line emission associated with the transitions from the excited states 5D0 to the ground state 7Fj (j = 0, 1, 2, 3, 4 of Eu3+. The results indicated that CaZrO3:xEu3+ might become an important orange-red phosphor candidate for use in white light emitting diodes (WLEDs with near-UV LED chips. The mechanoluminescence (ML intensity increases linearly with increasing impact velocity of the moving piston, suggesting that the sintered phosphors can also be useful as a stress sensor.

  6. Structural, optical and magnetic study of (1-x)ZnO-xMgO composites prepared through solid state reaction method

    Energy Technology Data Exchange (ETDEWEB)

    Adhlakha, Nidhi [Smart Materials Research Laboratory, Department of Physics, Indian Institute of Technology Roorkee, Roorkee 247667 (India); Yadav, K.L., E-mail: klyadav35@yahoo.com [Smart Materials Research Laboratory, Department of Physics, Indian Institute of Technology Roorkee, Roorkee 247667 (India); Kumar, Amit; Patel, Piyush Kumar; Rani, Jyoti; Rawat, Meera [Smart Materials Research Laboratory, Department of Physics, Indian Institute of Technology Roorkee, Roorkee 247667 (India)

    2012-09-01

    We report the study of structural, optical and magnetic properties of (1-x)ZnO-xMgO (x=0.35, 0.40, 0.45 and 0.50) composites prepared by solid state reaction method. X-ray diffraction pattern confirms the presence of both the phases associated with ZnO (hexagonal) and MgO (cubic), which is revealed through the existence of (1 1 1) and (2 0 0) peaks in addition to ZnO peaks. The lattice parameter c as calculated using X-ray analysis undergoes shrinkage with increasing content of MgO. Microstructural analysis suggests that there is no variation in spherical elongated shape of grains with increasing concentration of MgO, where the average grain size is found to be {approx}600 nm. The band gap as calculated from optical absorption spectra obtained by diffuse reflectance method recorded at room temperature is tuned from 3.16 to 3.55 eV. Photoluminescence spectra consist of near band edge UV emission (389 nm) and defect level emission (503 nm). The increase of MgO concentration leads to blue shift of UV emission peaks. The magnetic measurements conducted using SQUID at 5 K temperature reveals ferromagnetism along with paramagnetic and superparamagnetic components. Saturation magnetisation (M{sub s}) is observed to be enhanced with MgO doping.

  7. Preparation and Preliminary Dielectric Characterization of Structured C60-Thiol-Ene Polymer Nanocomposites Assembled Using the Thiol-Ene Click Reaction

    Directory of Open Access Journals (Sweden)

    Hanaa M. Ahmed

    2015-11-01

    Full Text Available Fullerene-containing materials have the ability to store and release electrical energy. Therefore, fullerenes may ultimately find use in high-voltage equipment devices or as super capacitors for high electric energy storage due to this ease of manipulating their excellent dielectric properties and their high volume resistivity. A series of structured fullerene (C60 polymer nanocomposites were assembled using the thiol-ene click reaction, between alkyl thiols and allyl functionalized C60 derivatives. The resulting high-density C60-urethane-thiol-ene (C60-Thiol-Ene networks possessed excellent mechanical properties. These novel networks were characterized using standard techniques, including infrared spectroscopy (FTIR, differential scanning calorimetry (DSC, dynamic mechanical analysis (DMA, and thermal gravimetric analysis (TGA. The dielectric spectra for the prepared samples were determined over a broad frequency range at room temperature using a broadband dielectric spectrometer and a semiconductor characterization system. The changes in thermo-mechanical and electrical properties of these novel fullerene-thiol-ene composite films were measured as a function of the C60 content, and samples characterized by high dielectric permittivity and low dielectric loss were produced. In this process, variations in chemical composition of the networks were correlated to performance characteristics.

  8. Enhanced luminescence in Mg{sup 2+} codoped CaTiO{sub 3}:Eu{sup 3+} phosphor prepared by solid state reaction

    Energy Technology Data Exchange (ETDEWEB)

    Vandana, C. Sai; Rudramadevi, B. Hemalatha [Department of Physics, Sri Venkateswara University, Tirupati-517 502 (India)

    2016-05-23

    CaTiO{sub 3} phosphors doped with Eu{sup 3+} and codoped with Mg{sup 2+} were prepared by Solid State Reaction method. The powders were characterized by X-ray diffraction, SEM with EDS, Raman scattering, and photoluminescence spectroscopy. The Crystalline phase and vibrational modes of the phosphors were studied using XRD pattern and Raman Spectrum respectively. The morphological studies of the phosphor samples were carried out using SEM analysis. From PL spectra we have observed two prominent red emission peaks around at 595 nm ({sup 5}D{sub 0}→{sup 7}F{sub 1}), 619 nm ({sup 5}D{sub 0}→{sup 7}F{sub 2}) with the excitation of 399 nm for Eu{sup 3+} doped CaTiO{sub 3} powders. The PL intensity of CaTiO{sub 3}:Eu{sup 3+} phosphor is enhanced significantly on codoping with Mg{sup 2+}. The observed enhanced emissions are due to energy transfer from Mg{sup 2+} to Eu{sup 3+}, which is due to radiative recombination. Eu{sup 3+} doped phosphors are well known to be promising materials for electroluminescent devices, optical amplifiers, and lasers.

  9. Synthesis by the Pechini method and reaction combustion for the preparation of TiO{sub 2}: a comparative analysis; Sintese pelo metodo Pechini e reacao de combustao para preparacao de TiO{sub 2}: uma analise comparativa

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, E.P.; Ribeiro, P.C.; Freitas, N.L.; Lira, H.L.; Costa, A.C.F.M. da [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Dept. de Engenharia de Materiais; Kiminami, R.H.G.A. [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Dept. de Engenharia de Materiais

    2009-07-01

    The aim of this work is to prepare TiO{sub 2} powder by Pechini and combustion reaction methods. A comparative analysis between the structural and morphological results obtained by the two methods was investigated. The powders were characterized by X-ray diffractions (XRD), infrared analysis, nitrogen adsorption (BET) and particle size distribution. The results from XRD show that the powders prepared by Pechini method and by combustion reaction using aniline as fuel, present anatase as major phase and traces of rutile phase. The values of crystallite size and surface area from BET were: 30 e 44 nm; 6.2 e 4.4 m{sup 2}/g, for the powders prepared by Pechini and combustion reaction, respectively. The values of particle size were: 21.9 e 5.3 {mu}m, for the powders prepared by Pechini and combustion reaction, respectively. The Pechini method was more suitable to obtain powders with irregular agglomerates, in the block shape with particles bonded softly and small crystallite size. (author)

  10. Methanol oxidation reaction on Ti/RuO{sub 2(x)}Pt{sub (1-x)} electrodes prepared by the polymeric precursor method

    Energy Technology Data Exchange (ETDEWEB)

    Freitas, R.G.; Marchesi, L.F.; Mattos-Costa, F.I.; Pereira, E.C. [Laboratorio Interdisciplinar de Eletroquimica e Ceramica, Centro Multidisciplinar para o Desenvolvimento de Materiais Ceramicos, Departamento de Quimica, Universidade Federal de Sao Carlos, Caixa Postal 676, 13560-905 Sao Carlos, SP (Brazil); Oliveira, R.T.S. [Laboratorio Interdisciplinar de Eletroquimica e Ceramica, Centro Multidisciplinar para o Desenvolvimento de Materiais Ceramicos, Departamento de Quimica, Universidade Federal de Sao Carlos, Caixa Postal 676, 13560-905 Sao Carlos, SP (Brazil); Grupo de Materiais Eletroquimicos e Metodos Eletroanaliticos, Instituto de Quimica de Sao Carlos, Universidade de Sao Paulo, Caixa Postal 780, 13566-590 Sao Carlos, SP (Brazil); LEMN, Laboratorio de Eletroquimica e Materiais Nanoestruturados, CCNH-Centro de Ciencias Naturais e Humanas, UFABC-Universidade Federal do ABC, CEP 09.210-170, Rua Santa Adelia 166, Bairro Bangu, Santo Andre, SP (Brazil); Bulhoes, L.O.S. [Laboratorio Interdisciplinar de Eletroquimica e Ceramica, Centro Multidisciplinar para o Desenvolvimento de Materiais Ceramicos, Departamento de Quimica, Universidade Federal de Sao Carlos, Caixa Postal 676, 13560-905 Sao Carlos, SP (Brazil); CENIP, Centro Universitario Central Paulista, UNICEP, Rua Miguel Petroni, 5111, CEP 13563-470, Sao Carlos, SP (Brazil); Santos, M.C. [Laboratorio Interdisciplinar de Eletroquimica e Ceramica, Centro Multidisciplinar para o Desenvolvimento de Materiais Ceramicos, Departamento de Quimica, Universidade Federal de Sao Carlos, Caixa Postal 676, 13560-905 Sao Carlos, SP (Brazil); LEMN, Laboratorio de Eletroquimica e Materiais Nanoestruturados, CCNH-Centro de Ciencias Naturais e Humanas, UFABC-Universidade Federal do ABC, CEP 09.210-170, Rua Santa Adelia 166, Bairro Bangu, Santo Andre, SP (Brazil)

    2007-09-27

    In this work, ruthenium oxide films containing platinum nanoparticles were prepared using the polymeric precursor method on Ti substrates with several molar ratios. This paper aims at presenting the characterization of the Pt content effect in the methanol electrochemical oxidation reaction. The films were physically characterized using X-ray diffraction and both Pt and RuO{sub 2} (rutile) phases were observed. The mean crystallite sizes were 6 nm for Pt and 25 nm for RuO{sub 2}. The X-ray photoelectronic results indicated that on the electrodes surfaces, depending on the substrate, there was RuO{sub 2}, Ru metal and Pt metal. Besides, it was not observed the formation of PtRu alloys. The atomic force microscopy images of the films showed highly rough surfaces. A decrease in the roughness mean square values is observed as the Pt content increases. These last results are similar to electroactive surface area values calculated by redox-couple (K{sub 4}FeCN{sub 6}/K{sub 3}FeCN{sub 6}). There was an increase in the globular size observed on the electrode surface and lower particle dispersion as the Pt content is increased from 12.5 to 75 mol%. Regarding the eletrode electrocatalytical behavior for methanol oxidation, it was observed that the onset oxidation overpotential is displaced towards more negative values as Pt content is decreased. Besides, an increase has been shown in the current density for methanol oxidation of 600% using a Ti/RuO{sub 2}-Pt (87.5:12.5) electrode compared to polycrystalline Pt. (author)

  11. Conceptual design and equipment of visitor centres

    International Nuclear Information System (INIS)

    Huettinger, K.

    1993-01-01

    Discussing the needs to be met by a visitor centre, the author develops the strategies to be adopted and defines the items to be included in the information program. The procedure in preparing the layout and design are explained and the media available to provide various levels of information are listed. Principles of selecting and mixing the media are discussed and the functions of the various sections of the centre described. Also included are examples of the costs and time requirements for the establishment of a typical centre. The importance of regular maintenance and updating is emphasized. (author)

  12. Preparation of 2H- and 3H-labelled carvone

    International Nuclear Information System (INIS)

    Banthorpe, D.V.; Brown, G.D.

    1989-01-01

    (-)-Carvone labelled with 2 H or 3 H at C-10 was prepared by two methods. The first, involving a reversible ene reaction yielded 10-deuteriocarvone with some substitution at other reactive centres. An improvement to this route involved the decompositon of an organozinc reagent of 10-chloro-carvone which gave a better yield of product substituted only at C-10. As a preliminary to a possible radioimmunoassay with the above material, four derivatives of carvone linked to bovine serum albumin were prepared. (author)

  13. Human-centred Governance

    DEFF Research Database (Denmark)

    Bason, Christian

    2017-01-01

    Design approaches are now being applied all over the world as a powerful approach to innovating public policies and services. Christian Bason, author of Leading public design: Discovering human-centred governance, argues that by bringing design methods into play, public managers can lead change...... with citizens at the centre, and discover a new model for steering public organisations: human-centred governance....

  14. The Search for Centre

    Science.gov (United States)

    Nunes, April

    2006-01-01

    This paper acknowledges the importance of a dancer's centre but likewise highlights the problematic nature of the communication of this concept from dance teacher to student. After a brief introduction of orthodox approaches in finding centre, this paper suggests a method of locating centre through the ancient somatic technique.

  15. CMS Centre at CERN

    CERN Multimedia

    2007-01-01

    A new "CMS Centre" is being established on the CERN Meyrin site by the CMS collaboration. It will be a focal point for communications, where physicists will work together on data quality monitoring, detector calibration, offline analysis of physics events, and CMS computing operations. Construction of the CMS Centre begins in the historic Proton Synchrotron (PS) control room. The historic Proton Synchrotron (PS) control room, Opened by Niels Bohr in 1960, will be reused by CMS to built its control centre. TThe LHC@FNAL Centre, in operation at Fermilab in the US, will work very closely with the CMS Centre, as well as the CERN Control Centre. (Photo Fermilab)The historic Proton Synchrotron (PS) control room is about to start a new life. Opened by Niels Bohr in 1960, the room will be reused by CMS to built its control centre. When finished, it will resemble the CERN Contro...

  16. PREPARING A MARKETING STRATEGY

    OpenAIRE

    Grönholm, Eija

    2010-01-01

    The objective of this thesis was to prepare a marketing strategy for Living City Centre of Kotka Association. The work was implemented with the members of the association and the executive director Reijo Saksa. Living City Centre of Kotka Association was founded in spring 2006 for promoting living, enjoyable and safe centers in the City of Kotka. The association has two permanent employees. The main duties are managing the Kotka market places and promoting the stakeholder connections betw...

  17. A simple method to prepare ZnO and Al(OH)3 nanorods by the reaction of the metals with liquid water

    International Nuclear Information System (INIS)

    Panchakarla, L.S.; Shah, M.A.; Govindaraj, A.; Rao, C.N.R.

    2007-01-01

    Reaction of liquid water with Zn and Al powders and foils have been investigated in the 25-75 deg. C range. The reaction of Zn metal powder with water in this temperature range yields ZnO nanorods. The diameter of the nanorods decreases slightly with the increase in the reaction temperature, accompanied by an increase in the relative intensity of UV emission band. Zn metal foils also yield ZnO nanorods on reaction with water in the 25-75 deg. C range. Reaction of Al metal powder or foil with water in the 25-75 deg. C range yields Al(OH) 3 nanorods. The formation of ZnO and Al(OH) 3 nanorods by the reaction of the metals with water is suggested to occur because of the decomposition of water by the metal giving hydrogen. - Graphical abstract: The reaction of water at a temperature in the 25-27 deg. C range with zinc metal gives rise to ZnO nanorods; with Al metal water gives Al(OH) 3 nanorods

  18. A versatile method for the preparation of conjugates of peptides with DNA/PNA/analog by employing chemo-selective click reaction in water

    Science.gov (United States)

    Gogoi, Khirud; Mane, Meenakshi V.; Kunte, Sunita S.; Kumar, Vaijayanti A.

    2007-01-01

    The specific 1,3 dipolar Hüisgen cycloaddition reaction known as ‘click-reaction’ between azide and alkyne groups is employed for the synthesis of peptide–oligonucleotide conjugates. The peptide nucleic acids (PNA)/DNA and peptides may be appended either by azide or alkyne groups. The cycloaddition reaction between the azide and alkyne appended substrates allows the synthesis of the desired conjugates in high purity and yields irrespective of the sequence and functional groups on either of the two substrates. The versatile approach could also be employed to generate the conjugates of peptides with thioacetamido nucleic acid (TANA) analog. The click reaction is catalyzed by Cu (I) in either water or in organic medium. In water, ∼3-fold excess of the peptide-alkyne/azide drives the reaction to completion in 2 h with no side products. PMID:17981837

  19. An alternative route for the preparation of the medical isotope 99Mo from the 238U(γ, f) and 100Mo(γ, n) reactions

    International Nuclear Information System (INIS)

    Naik, H.; Goswami, A.; Suryanarayana, S.V.; Jagadeesan, K.C.; Thakare, S.V.; Joshi, P.V.; Nimje, V.T.; Mittal, K.C.; Venugopal, V.; Kailas, S.

    2013-01-01

    The radionuclide 99 Mo, which has a half-life of 65.94 h was produced from 238 U(γ, f) and 100 Mo(γ, n) reactions using a 10 MeV electron linac at EBC, Kharghar Navi-Mumbai, India. This has been investigated since the daughter product 99m Tc is very important from a medical point of view and can be produced in a generator from the parent 99 Mo. The activity of 99 Mo was analyzed by a γ-ray spectrometric technique using a HPGe detector. From the detected γ-rays activity of 140.5 and 739.8 keV, the amount of 99 Mo produced was determined. For comparison, the amount of 99 Mo from 238 U(γ, f) and 100 Mo(γ, n) reactions was also estimated using the experimental photon flux from 197 Au(γ, n) 196 Au reaction. The amount of 99 Mo from the detected γ-lines is in agreement with the estimated value for 238 U(γ, f) and 100 Mo(γ, n) reactions. The production of 99 Mo activity from 238 U(γ, f) and 100 Mo(γ, n) reactions is a relevant and novel approach, which provides alternative routes to 235,238 U(n, f) and 98 Mo(n, γ) reactions, circumventing the need for a reactor. The viability and practicality of the 99 Mo production from the 238 U(γ, f) and 100 Mo(γ, n) reactions alternative to 235,238 U(n, f) and 98 Mo(n, γ) reactions has been emphasize. An estimate has been also arrived based on the experimental data of present work to fulfill the requirement of DOE. (author)

  20. SAP Nuclear Competence Centre

    International Nuclear Information System (INIS)

    Andrlova, Z.

    2009-01-01

    In this issue we continue and introduce the SAP Nuclear Competence Centre and its head Mr. Igor Dzama. SAP Nuclear Competence Centrum is one of the fi rst competence centres outside ENEL headquarters. It should operate in Slovakia and should have competencies within the whole Enel group. We are currently dealing with the issues of organisation and funding. We are trying to balance the accountability to the NPP directors and to the management of the competence centres at Enel headquarters; we are looking at the relations between the competence centres within the group and defining the services that we will provide for the NPPs. author)

  1. Canadian Irradiation Centre

    International Nuclear Information System (INIS)

    1987-05-01

    The Canadian Irradiation Centre is a non-profit cooperative project between Atomic Energy of Canada Limited, Radiochemical Company and Universite du Quebec, Institut Armand-Frappier, Centre for Applied Research in Food Science. The Centre's objectives are to develop, demonstrate and promote Canada's radiation processing technology and its applications by conducting applied research; training technical, professional and scientific personnel; educating industry and government; demonstrating operational and scientific procedures; developing processing procedures and standards, and performing product and market acceptance trials. This pamphlet outlines the history of radoation technology and the services offered by the Canadian Irradiation Centre

  2. A water soluble fraction capable of regulating the immunity reactions of a host against allogenic cells or tissues, the pharmaceutical preparations which contain this fraction and a procedure for the preparation of the latter

    International Nuclear Information System (INIS)

    1980-01-01

    The preparation is described of non-toxic bone marrow cell suspensions containing a marrow-regulating factor, which are suitable for intravenous injection in patients with serious hematopoietic disturbances or radiation syndrome. The marrow-regulating factor conditions the bone marrow in a manner which enhances the success of bone marrow transplantation in donor-incompatible or semicompatible hosts. The extensive testing of this pharmaceutical preparation in irradiated mice is described and a toxicity study reported. (Auth.)

  3. National Centre for Radioactive Ion Beams (NCRIB)

    International Nuclear Information System (INIS)

    Chintalapudi, S.N.

    1999-01-01

    A dedicated National Centre for RIB (NCRIB) proposed discussed at several forums is presented. The production of (RIB) radioactive ion beams and applications of beams leading to competitive studies in nuclear structure, nuclear reactions, condensed matter, bio-science and radioactive isotope production etc. are mentioned

  4. Preparation and characterization of Pd{sub x}Ag{sub y}/C electrocatalysts for ethanol electrooxidation reaction in alkaline media

    Energy Technology Data Exchange (ETDEWEB)

    Li Guanglan [Direct Alcohol Fuel Cell Laboratory, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); Graduate University of Chinese Academy of Sciences, Beijing 100049 (China); Jiang Luhua [Direct Alcohol Fuel Cell Laboratory, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); Jiang Qian [Direct Alcohol Fuel Cell Laboratory, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); Graduate University of Chinese Academy of Sciences, Beijing 100049 (China); Wang Suli [Direct Alcohol Fuel Cell Laboratory, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); Sun Gongquan, E-mail: gqsun@dicp.ac.cn [Direct Alcohol Fuel Cell Laboratory, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China)

    2011-09-01

    Highlights: {center_dot} The effects of Pd or PdAg particle size and PdAg alloy degrees on the EOR activity are investigated. {center_dot} The Pd lattice constant of the PdAg increases with increasing the Ag content. {center_dot} The EOR activity of the PdAg/C presents a 'volcano' plot with increasing the Pd lattice constant. {center_dot} The optimal Pd/Ag atomic ratio locates between 2/1 and 3/1. {center_dot} The EOR activity of the PdAg/C increases with increasing the PdAg particle size from 3.4 to 5.2 nm. - Abstract: Carbon-supported bimetallic PdAg catalysts with Pd/Ag atomic ratios varying from 4/1 to 1/2 were prepared by an impregnation-reduction method. The impregnated black mixture was treated in H{sub 2}/N{sub 2} atmosphere at a temperature varying from 180 to 500 deg. C. The obtained Pd{sub x}Ag{sub y}/C catalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), cyclic voltammetry (CV) and chronoamperometry (CA). XRD results show that the lattice constant of Pd is dilated, suggesting the formation of PdAg alloy. The lattice constant of Pd for the Pd{sub x}Ag{sub y}/C-500 (reduced at 500 deg. C by H{sub 2}) increases linearly and the average metal particle size decreases slightly from 6.8 to 5.1 nm with increasing Ag fractions from 20% to 67% in the PdAg composition. For Pd{sub x}Ag{sub y}/C catalysts with a certain specific Pd/Ag atomic ratio, e.g., Pd{sub 2}Ag{sub 1}/C, the dilated lattice constant of Pd is independent of the reducing temperature, indicating the alloy degree for the Pd{sub 2}Ag{sub 1}/C-t catalysts is comparable. The average metal particle size for the Pd{sub 2}Ag{sub 1}/C-t catalysts increases from 3.4 to 5.2 nm with H{sub 2} reduction temperature increasing from 180 to 500 deg. C. The potentiodynamic measurements on ethanol electrooxidation reaction (EOR) show that the catalytic activities for the Pd{sub x}Ag{sub y}/C-t catalysts toward the EOR are improved by alloying Pd with Ag. At

  5. Egypt | IDRC - International Development Research Centre

    International Development Research Centre (IDRC) Digital Library (Canada)

    Our research support in Egypt has shifted focus with the country's changing needs. ... With support from IDRC and other partners, the university established the Alexandria Research Centre for ... stimulate technology start ups; prepare youth for in high-demand jobs in retail, hospitality, ... Careers · Contact Us · Site map.

  6. Pressure-driven one-step solid phase-based on-chip sample preparation on a microfabricated plastic device and integration with flow-through polymerase chain reaction (PCR).

    Science.gov (United States)

    Tran, Hong Hanh; Trinh, Kieu The Loan; Lee, Nae Yoon

    2013-10-01

    In this study, we fabricate a monolithic poly(methylmethacrylate) (PMMA) microdevice on which solid phase-based DNA preparation and flow-through polymerase chain reaction (PCR) units were functionally integrated for one-step sample preparation and amplification operated by pressure. Chelex resin, which is used as a solid support for DNA preparation, can capture denatured proteins but releases DNA, and the purified DNA can then be used as a template in a subsequent amplification process. Using the PMMA microdevices, DNA was successfully purified from both Escherichia coli and human hair sample, and the plasmid vector inserted in E. coli and the D1S80 locus in human genomic DNA were successfully amplified from on-chip purified E. coli and human hair samples. Furthermore, the integration potential of the proposed sample preparation and flow-through PCR units was successfully demonstrate on a monolithic PMMA microdevice with a seamless flow, which could pave the way for a pressure-driven, simple one-step sample preparation and amplification with greatly decreased manufacture cost and enhanced device disposability. Copyright © 2013 Elsevier B.V. All rights reserved.

  7. Danish Anaesthesia Allergy Centre - preliminary results

    DEFF Research Database (Denmark)

    Garvey, L H; Roed-Petersen, J; Menné, T

    2001-01-01

    BACKGROUND: Anaphylactoid reactions in anaesthesia are rare and should ideally be investigated in specialist centres. At Gentofte University Hospital, we established such a centre in 1998 as a joint venture between the Departments of Anaesthesiology and Dermatology. We present the methodology...... of in vitro testing and skin testing. Blood samples for tryptase analysis are taken at the time of reaction and a control sample is taken together with samples for specific IgE analysis 2-4 weeks after the reaction. Subsequent skin testing comprises both prick tests and intradermal tests in most cases...... for chlorhexidine. Only one patient has tested positive to a neuromuscular blocking drug (NMBD) so far. DISCUSSION: Our preliminary results appear to differ in two ways from results usually found in this field. Firstly, only one patient has tested positive for a NMBD and secondly, we have had four patients...

  8. Effect of reaction time on structural, morphology and optical properties of ZnO nanoflakes prepared by chemical bath deposition method

    Energy Technology Data Exchange (ETDEWEB)

    Molefe, F.V.; Koao, L.F., E-mail: koaolf@qwa.ufs.ac.za; Dolo, J.J.; Dejene, B.F.

    2014-04-15

    ZnO nanoflakes have been successfully synthesized by the chemical bath deposition (CBD) method for different reaction times. X-ray diffraction (XRD) results confirm the initial formation of the cubic ZnO structure. However, increasing the reaction time resulted into the emergence of the well-known hexagonal wurtzite structure of ZnO. Scanning electron microscopy images showed the presence of agglomerated nanoflakes. The morphology was found not to depend on synthesis time. UV–vis spectra showed a partially increase in the percentage reflectance and the absorption edges red shifted to the higher wavelength with an increase in synthesis time. The highest band gap energy was obtained for ZnO synthesized for 1 min, with its estimated band gap energy of 3.91±0.08 eV. The estimated band gap decreased with an increase in the reaction time. The photoluminescent intensity of the emission peak at 473 nm decreased with an increase in reaction time.

  9. Effects of Ar or O2 Gas Bubbling for Shape, Size, and Composition Changes in Silver-Gold Alloy Nanoparticles Prepared from Galvanic Replacement Reaction

    Directory of Open Access Journals (Sweden)

    Md. Jahangir Alam

    2013-01-01

    Full Text Available The galvanic replacement reaction between silver nanostructures and AuCl4- solution has recently been demonstrated as a versatile method for generating metal nanostructures with hollow interiors. Here we describe the results of a systematic study detailing the morphological, structural, compositional, and spectral changes involved in such a heterogeneous reaction on the nanoscale. Effects of Ar or O2 gas bubbling for the formation of Ag-Au alloy nanoparticles by the galvanic replacement between spherical Ag nanoparticles and AuCl4- especially were studied in ethylene glycol (EG at 150°C. The shape, size, and composition changes occur rapidly under O2 bubbling in comparison with those under Ar bubbling. The major product after 60 min heating under Ar gas bubbling was perforated Ag-Au alloy particles formed by the replacement reaction and the minor product was ribbon-type particles produced from splitting off some perforated particles. On the other hand, the major product after 60 min heating under O2 gas bubbling was ribbon-type particles. In addition, small spherical Ag particles are produced. They are formed through rereduction of Ag+ ions released from the replacement reaction and oxidative etching of Ag nanoparticles by O2/Cl− in EG.

  10. Cu-catalyzed C(sp³)-H bond activation reaction for direct preparation of cycloallyl esters from cycloalkanes and aromatic aldehydes.

    Science.gov (United States)

    Zhao, Jincan; Fang, Hong; Han, Jianlin; Pan, Yi

    2014-05-02

    Cu-catalyzed dehydrogenation-olefination and esterification of C(sp(3))-H bonds of cycloalkanes with TBHP as an oxidant has been developed. The reaction involves four C-H bond activations and gives cycloallyl ester products directly from cycloalkanes and aromatic aldehydes.

  11. Danish Anaesthesia Allergy Centre - preliminary results

    DEFF Research Database (Denmark)

    Garvey, L H; Roed-Petersen, J; Menné, T

    2001-01-01

    BACKGROUND: Anaphylactoid reactions in anaesthesia are rare and should ideally be investigated in specialist centres. At Gentofte University Hospital, we established such a centre in 1998 as a joint venture between the Departments of Anaesthesiology and Dermatology. We present the methodology...... for chlorhexidine. Only one patient has tested positive to a neuromuscular blocking drug (NMBD) so far. DISCUSSION: Our preliminary results appear to differ in two ways from results usually found in this field. Firstly, only one patient has tested positive for a NMBD and secondly, we have had four patients...

  12. Reaction of cyanide with Pt-nucleobase complexes: preparative, spectroscopic, and structural studies. Unexpected stability of Pt-thymine and Pt-uracil complexes

    International Nuclear Information System (INIS)

    Raudaschl-Sieber, G.; Lippert, B.

    1985-01-01

    In order to improve the understanding of the nature of the strongly bound cisplatin on DNA, the reactivity of a large number of complexes of cis-(NH 3 ) 2 Pt/sup II/ with the model nucleobases, 9-ethylguanine, 9-methyladenine, 1-methylcytisine, 1-methylthymine, and i-methyluracil, toward a large excess of cyanide was studied. The behavior of Pt-nucleobase complexes toward CN - is compared with that of simple Pt-amine complexes, and reactions of thiourea with two selected nucleobase complexes is reported. The relevance of these findings with respect to substitution reactions of Pt-nucleobase complexes and the nature of the tightly DNA-bound Pt, which cannot be removed by excess KCN, is discussed

  13. Electrocatalysts of platinum, cobalt and nickel prepared by mechanical alloying for the oxygen reduction reaction in H2SO4 0.5M

    International Nuclear Information System (INIS)

    Garcia C, M.A.; Fernandez V, S.M.; Vargas G, J.R.

    2007-01-01

    Metallic powders of Pt, Co and Nickel were processed by mechanical alloyed and electrocatalysts were synthesized for the oxygen reduction reaction, applicable in fuel cells. The structural and morphological characterization was carried out using X-ray Diffraction, scanning electron microscopy and transmission electron microscopy. It was found that the alloyed powders formed agglomerates that consist of crystalline particles of nano metric size. Its were obtained polarization curves by the Electrode of Rotational Disk technique in a solution of H 2 SO 4 0.5 M, used as electrolyte, to evaluate the electrocatalytic activity of mechanically alloyed powders. Tafel graphics were built to determine the kinetic parameters of each electro catalyst. The PtCoNi alloy exhibited the biggest electrocatalytic activity, with the smallest over potential for the oxygen reduction reaction. (Author)

  14. Fabrication, Characterization, and Optimization of CdS and CdSe Quantum Dot-Sensitized Solar Cells with Quantum Dots Prepared by Successive Ionic Layer Adsorption and Reaction

    Directory of Open Access Journals (Sweden)

    H. K. Jun

    2014-01-01

    Full Text Available CdS and CdSe quantum dot-sensitized solar cells (QDSSCs were used for the study of determining the optimum preparation parameters that could yield the best solar cell performance. The quantum dots (QDs were coated on the surface of mesoporous TiO2 layer deposited on FTO substrate using the successive ionic layer adsorption and reaction (SILAR method. In this method the QDs are allowed to grow on TiO2 by dipping the TiO2 electrode successively in two different solutions for predetermined times. This method allows the fabrication of QDs in a facile way. Three preparation parameters that control the QD fabrication were investigated: concentration of precursor solutions, number of dipping cycles (SILAR cycles, and dipping time in each solution. CdS based QDSSC showed optimum performance when the QDs were prepared from precursor solutions having the concentration of 0.10 M using 4 dipping cycles with the dipping time of 5 minutes in each solution. For CdSe QDSSC, the optimum performance was achieved with QDs prepared from 0.03 M precursor solutions using 7 dipping cycles with 30 s dipping time in each solution. The QDs deposited on TiO2 surface were characterized using UV-vis absorption spectroscopy, FESEM, and TEM imaging.

  15. Electrochemical performance of Li4Mn5O12 nano-crystallites prepared by spray-drying-assisted solid state reactions

    International Nuclear Information System (INIS)

    Jiang, Y.P.; Xie, J.; Cao, G.S.; Zhao, X.B.

    2010-01-01

    Nanosized Li 4 Mn 5 O 12 has been synthesized by a spray-drying-assisted solid state method. The effect of spray drying and drying temperature on the microstructure and electrochemical performance of the final products has been investigated. The microstructure of the products has been characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The electrochemical performance of the products has been studied by galvanostatic cycling, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). It has been found that the products prepared with a spray-drying pretreatment of the precursor exhibit a smaller grain size and a narrower size distribution than that prepared without the pretreatment. Among the three samples with a precursor pretreatment, that pretreated at 250 o C shows the best electrochemical performance due to the smallest grain size of below 50 nm and the narrowest size distribution.

  16. The Bruce Energy Centre

    International Nuclear Information System (INIS)

    Jones, R.I.

    1982-06-01

    The Bruce Energy Centre Development Corporation is a joint venture of the Ontario Energy Corporation and 6 private companies formed to market surplus steam from the Bruce Nuclear Power Development. The corporation will also sell or lease land near Bruce NPD. The Bruce Energy Centre has an energy output of 900 BTU per day per dollar invested. Potential customers include greenhouse operators, aquaculturalists, food and beverage manufacturers, and traditional manufacturers

  17. The Aube centre

    International Nuclear Information System (INIS)

    1996-07-01

    This educational booklet is devoted to a general presentation of the Aube radioactive wastes storage centre. After a short presentation of the Andra, the French national agency for the management of radioactive wastes, it gives some general information about radioactive wastes (origin, classification), containers (quality assurance and different types), wastes transportation (planning, safety), and about the Aube centre itself: description, treatment and conditioning of drums (compacting and injection), storage facilities, geological situation of the site, and environmental controls. (J.S.)

  18. CENTRE FOR GEOMETRICAL METROLOGY

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo

    The objective of this Annual Report is to give a general introduction to CGM as well as to give an account of the tasks carried out using the facilities of CGM's Instrument Centre during 1998 and 1999.......The objective of this Annual Report is to give a general introduction to CGM as well as to give an account of the tasks carried out using the facilities of CGM's Instrument Centre during 1998 and 1999....

  19. Understanding of the structure activity relationship of PtPd bimetallic catalysts prepared by surface organometallic chemistry and ion exchange during the reaction of iso-butane with hydrogen

    KAUST Repository

    Al-Shareef, Reem A.; Harb, Moussab; Saih, Youssef; Ould-Chikh, Samy; Roldan, Manuel A.; Anjum, Dalaver H.; Guyonnet, Elodie Bile; Candy, Jean-Pierre; Jan, Deng-Yang; Abdo, Suheil F.; Aguilar-Tapia, Antonio; Proux, Olivier; Hazemann, Jean-Louis; Basset, Jean-Marie

    2018-01-01

    Well-defined silica supported bimetallic catalysts Pt100-x Pdx were prepared by Surface Organometallic Chemistry (SOMC) and Ionic-Exchange (IE) methods. For all investigated catalysts, iso-butane reaction with hydrogen under differential conditions led to the formation of methane and propane, n-butane, and traces of iso-butylene. The total reaction rate decreased with increasing the Pd loading for both catalysts series as a result of decreasing turnover rate of both isomerization and hydrogenolysis. In the case of Pt100-x Pdx(SOMC) catalysts, the experimental results in combination with DFT calculations suggested a selective coverage of Pt (1 0 0) surface by agglomerated Pd atoms like “islands”, assuming that each metal roughly keeps its intrinsic catalytic properties with relatively small electron transfer from Pt to Pd in the case of Pt-rich sample and from Pd to Pt in the case of Pd-rich sample. For the PtPd catalysts prepared by IE, the catalytic behavior could be explained by the formation of a surface alloy between Pt and Pd in the case of Pd-rich sample and by the segregation of a small amount of Pd on the surface in the case of Pt-rich sample, as demonstrated by TEM, EXAFS and DFT. The catalytic results were explained by a structure activity relationship based on the proposed mechanism of CH bond and CC bond activation and cleavage for iso-butane hydrogenolysis, isomerization, cracking and dehydrogenation.

  20. Understanding of the structure activity relationship of PtPd bimetallic catalysts prepared by surface organometallic chemistry and ion exchange during the reaction of iso-butane with hydrogen

    KAUST Repository

    Alshareef, Reem Abdul aziz Hamed

    2018-04-25

    Well-defined silica supported bimetallic catalysts Pt100-x Pdx were prepared by Surface Organometallic Chemistry (SOMC) and Ionic-Exchange (IE) methods. For all investigated catalysts, iso-butane reaction with hydrogen under differential conditions led to the formation of methane and propane, n-butane, and traces of iso-butylene. The total reaction rate decreased with increasing the Pd loading for both catalysts series as a result of decreasing turnover rate of both isomerization and hydrogenolysis. In the case of Pt100-x Pdx(SOMC) catalysts, the experimental results in combination with DFT calculations suggested a selective coverage of Pt (1 0 0) surface by agglomerated Pd atoms like “islands”, assuming that each metal roughly keeps its intrinsic catalytic properties with relatively small electron transfer from Pt to Pd in the case of Pt-rich sample and from Pd to Pt in the case of Pd-rich sample. For the PtPd catalysts prepared by IE, the catalytic behavior could be explained by the formation of a surface alloy between Pt and Pd in the case of Pd-rich sample and by the segregation of a small amount of Pd on the surface in the case of Pt-rich sample, as demonstrated by TEM, EXAFS and DFT. The catalytic results were explained by a structure activity relationship based on the proposed mechanism of CH bond and CC bond activation and cleavage for iso-butane hydrogenolysis, isomerization, cracking and dehydrogenation.

  1. Preparation of bromine fluoride

    International Nuclear Information System (INIS)

    Domange, Pr; Duflo, J.

    1958-05-01

    This note addresses the preparation of bromine fluoride. It indicates the implemented process for the reaction, used products (fluorine and bromine), and column characteristics. It describes the operating mode. Apparatus drawing is provided

  2. A day in the CERN Control Centre

    CERN Multimedia

    Rosaria Marraffino

    2015-01-01

    The CERN Control Centre (CCC) is the nerve centre of the CERN beam systems. From this room, the experts prepare, monitor, adjust, and control the particle beams that circulate throughout the accelerator complex while ensuring that the services and the technical infrastructure work flawlessly. Buttons, screens, telephones, lights (but no sound): in the CCC, everything is ready to make it possible for the LHC to reach the unprecedented energies expected at Run 2.   Seen from above, the CERN Control Centre resembles the shape of a quadrupole magnet. The consoles are distributed in four circles, called “islands”, dedicated to the LHC, the SPS, the PS Complex and the Technical Infrastructure (TI) respectively. Spread between TI and LHC are the Cryogenics consoles. Being in the same room allows the 24h-manned islands to be constantly in touch with one another, thus ensuring the best performance of the machines. At the LHC island, operators are currently busy training the magnet...

  3. Control of Urania Crystallite Size by HMTA-Urea Reactions in the Internal Gelation Process for Preparing (U, Pu)O2Fuel Kernels

    Energy Technology Data Exchange (ETDEWEB)

    Collins, J.L.

    2005-04-26

    In the development of (U,Pu)O{sub 2} kernels by the internal gelation process for the Direct Press Spheroidized process at Oak Ridge National Laboratory, a novel crystal growth step was discovered that made it possible to prepare calcined porous kernels that could be used as direct-press feed for Fast Breeder Reactor pellet fabrication. High-quality pellets were prepared that were near theoretical density and that (upon examination) revealed no evidence of sphere remnants. The controlled crystal growth step involved using hexamethylenetetramine (HMTA)-urea stock solutions that were boiled for 60 min or less. Before this discovery, all the other crystal growth steps (when utilized) could reduce the tap density to only {approx}1.3 g/cm{sup 3}, which was not sufficiently low for use in ideal pellet pressing. The use of the boiled HMTA-urea solution allowed the tap density to be lowered to 0.93 g/cm{sup 3}, with the ideal density being about 1.0 g/cm{sup 3}. This report describes the development of this technology and its scaleup.

  4. One-step liquid phase chemical method to prepare carbon-based amorphous molybdenum sulfides: As the effective hydrogen evolution reaction catalysts

    International Nuclear Information System (INIS)

    Guo, Mengmeng; Wu, Qikang; Yu, Miaomiao; Wang, Yinling; Li, Maoguo

    2017-01-01

    Two different kinds of carbon-based amorphous molybdenum sulfide composite catalysts (activated carbon supported amorphous molybdenum sulfide and acetylene black supported amorphous molybdenum sulfide) had been prepared in a facile and scalable one-step liquid phase chemical method. The morphological and structural information of catalysts was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-Ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and it’s electro-catalytic HER activity were evaluated by linear sweep voltammetry(LSV), amperometric i-t technology and AC impedance technology. The as-prepared carbon-based amorphous molybdenum sulfides showed greatly enhanced electro-catalytic activity for HER compared with pure amorphous molybdenum sulfides. Especially, the nano-sized acetylene black supported molybdenum sulfide exhibited excellent electro-catalytic HER performances with a low onset potential of −116 mV versus reverse hydrogen electrode (RHE) and a small Tafel slope of 51 mV per decade.

  5. Rapid and facile preparation of zinc ferrite (ZnFe{sub 2}O{sub 4}) oxide by microwave-solvothermal technique and its catalytic activity in heterogeneous photo-Fenton reaction

    Energy Technology Data Exchange (ETDEWEB)

    Anchieta, Chayene G.; Severo, Eric C.; Rigo, Caroline; Mazutti, Marcio A. [Department of Chemical Engineering, Federal University of Santa Maria, 97105-900, Santa Maria (Brazil); Kuhn, Raquel C., E-mail: raquelckuhn@yahoo.com.br [Department of Chemical Engineering, Federal University of Santa Maria, 97105-900, Santa Maria (Brazil); Muller, Edson I.; Flores, Erico M.M. [Department of Chemistry, Federal University of Santa Maria, 97105-900, Santa Maria (Brazil); Moreira, Regina F.P.M. [Department of Chemical Engineering and Food Engineering, Federal University of Santa Catarina, 88040-970, Florianópolis (Brazil); Foletto, Edson L. [Department of Chemical Engineering, Federal University of Santa Maria, 97105-900, Santa Maria (Brazil)

    2015-06-15

    In this work zinc ferrite (ZnFe{sub 2}O{sub 4}) oxide was rapidly and easily prepared by microwave-solvothermal route and its catalytic property in photo-Fenton reaction was evaluated. The effects of microwave heating time and power on the properties of produced particles were investigated. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM) and nitrogen adsorption–desorption isotherms were the techniques used for characterizing the solid products. The synthesized material was tested as a catalyst in the degradation of the textile dye molecule by the heterogeneous photo-Fenton process. Characterization results showed that the microwave heating time and power have significant influences on the formation of the phase spinel as well as on its physical properties. The reaction results showed that the ZnFe{sub 2}O{sub 4} oxide has good photocatalytic activity, which can be attributed to high surface area and pore volume, and large pore size. The ZnFe{sub 2}O{sub 4} oxide produced by the microwave irradiation exhibited promising photocatalytic activity for the removal of textile dye, reaching nearly 100% of decolorization at 40 min and 60% of mineralization at 240 min. Therefore, ZnFe{sub 2}O{sub 4} particles rapidly prepared by the microwave route have the potential for use in treatment of textile wastewater by the heterogeneous photo-Fenton process. - Highlights: • ZnFe{sub 2}O{sub 4} was synthesized by microwave-solvothermal method. • ZnFe{sub 2}O{sub 4} was prepared by different microwave heating times and powers. • ZnFe{sub 2}O{sub 4} was used as heterogeneous photo-Fenton catalyst. • Degradation of Procion red dye using heterogeneous photo-Fenton process. • ZnFe{sub 2}O{sub 4} was highly efficient to degrade textile dye under visible light.

  6. Energy centre microgrid model

    Energy Technology Data Exchange (ETDEWEB)

    Pasonen, R.

    2011-09-15

    A simulation model of Energy centre microgrid made with PSCAD simulation software version 4.2.1 has been built in SGEM Smart Grids and Energy Markets (SGEM) work package 6.6. Microgrid is an autonomous electric power system which can operate separate from common distribution system. The idea of energy centre microgrid concept was considered in Master of Science thesis 'Community Microgrid - A Building block of Finnish Smart Grid'. The name of energy centre microgrid comes from a fact that production and storage units are concentrated into a single location, an energy centre. This centre feeds the loads which can be households or industrial loads. Power direction flow on the demand side remains same compared to the current distribution system and allows to the use of standard fuse protection in the system. The model consists of photovoltaic solar array, battery unit, variable frequency boost converter, inverter, isolation transformer and demand side (load) model. The model is capable to automatically switch to islanded mode when there is a fault in outside grid and back to parallel operation mode when fault is removed. The modelled system responses well to load changes and total harmonic distortion related to 50Hz base frequency is kept under 1.5% while operating and feeding passive load. (orig.)

  7. Initial deposition and electron paramagnetic resonance defects characterization of TiO{sub 2} films prepared using successive ionic layer adsorption and reaction method

    Energy Technology Data Exchange (ETDEWEB)

    Wu Yiyong, E-mail: wuyiyong2001@yahoo.com.cn [National Key Laboratory of Materials Behaviors and Evaluation Technology in Space Environments, Harbin Institute of Technology, P.O. 432, Nan gang District, Harbin, 150080 (China); Shi Yaping [National Key Laboratory of Materials Behaviors and Evaluation Technology in Space Environments, Harbin Institute of Technology, P.O. 432, Nan gang District, Harbin, 150080 (China); Harbin University of Commerce, P.O. 493, Song bei District, Harbin, 150028 (China); Xu Xianbin; Sun Chengyue [National Key Laboratory of Materials Behaviors and Evaluation Technology in Space Environments, Harbin Institute of Technology, P.O. 432, Nan gang District, Harbin, 150080 (China)

    2012-06-01

    Successive ionic layer adsorption and reaction (SILAR) technique was considered promisingly to deposit ultra thin titanium dioxide (TiO{sub 2}) films under ambient condition. In this paper, the growth process, structures and paramagnetic defects of the films were characterized by complementary techniques of atomic force microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy and electron paramagnetic resonance spectroscopy. The results indicate that on glass substrate the SILAR TiO{sub 2} film nucleates in an island mode within the initial five deposition cycles but grows in a layer-by-layer mode afterwards. The growth rate was measured as 4.6 A/cycle. In the as-deposited films, a kind of paramagnetic defects is detected at g (2.0029) and it can be attributed to oxygen vacancies. These as-received oxygen vacancies could be annealed out at 473 K. Ultraviolet irradiation on the as-deposited films can also decrease the density of the defects. The relative mechanisms on the phenomenon were discussed in this paper. - Highlights: Black-Right-Pointing-Pointer TiO{sub 2} films are deposited on glass at 25 Degree-Sign C by successive ionic layer adsorption and reaction method with a rate of 4.6 A/cycle. Black-Right-Pointing-Pointer The films nucleate in an island mode initially but grow in a layer mode afterwards. Black-Right-Pointing-Pointer The SILAR TiO{sub 2} films nucleation period is five cycles. Black-Right-Pointing-Pointer Electron paramagnetic resonance spectroscopy shows that TiO{sub 2} films paramagnetic defects are attributed to oxygen vacancies. Black-Right-Pointing-Pointer They will decrease by anneal or ultraviolet radiation and form hydroxyl or superoxide radicals.

  8. Initial deposition and electron paramagnetic resonance defects characterization of TiO2 films prepared using successive ionic layer adsorption and reaction method

    International Nuclear Information System (INIS)

    Wu Yiyong; Shi Yaping; Xu Xianbin; Sun Chengyue

    2012-01-01

    Successive ionic layer adsorption and reaction (SILAR) technique was considered promisingly to deposit ultra thin titanium dioxide (TiO 2 ) films under ambient condition. In this paper, the growth process, structures and paramagnetic defects of the films were characterized by complementary techniques of atomic force microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy and electron paramagnetic resonance spectroscopy. The results indicate that on glass substrate the SILAR TiO 2 film nucleates in an island mode within the initial five deposition cycles but grows in a layer-by-layer mode afterwards. The growth rate was measured as 4.6 Å/cycle. In the as-deposited films, a kind of paramagnetic defects is detected at g (2.0029) and it can be attributed to oxygen vacancies. These as-received oxygen vacancies could be annealed out at 473 K. Ultraviolet irradiation on the as-deposited films can also decrease the density of the defects. The relative mechanisms on the phenomenon were discussed in this paper. - Highlights: ► TiO 2 films are deposited on glass at 25 °C by successive ionic layer adsorption and reaction method with a rate of 4.6 Å/cycle. ► The films nucleate in an island mode initially but grow in a layer mode afterwards. ► The SILAR TiO 2 films nucleation period is five cycles. ► Electron paramagnetic resonance spectroscopy shows that TiO 2 films paramagnetic defects are attributed to oxygen vacancies. ► They will decrease by anneal or ultraviolet radiation and form hydroxyl or superoxide radicals.

  9. 99mTc-DMSA complex preparation. The effect of pH and tin(II) chloride amount on reaction

    International Nuclear Information System (INIS)

    Benkovsky, I.; Stanik, R.

    2010-01-01

    Labelling of meso-2,3-dimercaptosuccinic acid (DMSA) with technetium-99m was reinvestigated. Dependence of the 99m Tc-DMSA complex formation on the molar ratio of DMSA:reducing agent (SnCl 2 · 2H 2 O) and pH was studied. Five different types of 99m Tc-DMSA complexes were determined. Especially three different complexes were established in the clinically used and prepared DMSA kit labelled with 99m Tc under alkaline condition. This radiopharmaceutical is used as imaging agent of the primary medullary carcinoma in the thyroid gland and different metastasis types. The existence of all complexes was observed by paper chromatography, paper electrophoresis and high performance liquid chromatography. (author)

  10. The ideal Atomic Centre

    International Nuclear Information System (INIS)

    Mas, R.

    1965-01-01

    The author presents considerations which should prove to be of interest to all those who have to design, to construct and to operate a nuclear research centre. A large number of the ideas presented can also be applied to non-nuclear scientific research centres. In his report the author reviews: various problems with which the constructor is faced: ground-plan, infrastructure, buildings and the large units of scientific equipment in the centre, and those problems facing the director: maintenance, production, supplies, security. The author stresses the relationship which ought to exist between the research workers and the management. With this aim in view he proposes the creation of National School for Administration in Research which would train administrative executives for public or private organisations; they would be specialised in the fields of fundamental or applied research. (author) [fr

  11. Netherlands Reactor Centre

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    Briefly reviews the last year's work of the twenty year old Netherlands Reactor Centre (RCN) in the fields of reactor safety, fissile material, nuclear fission, non-nuclear energy systems and overseas co-operation. The annual report thus summarised is the last one to appear under the name of RCN. The terms of reference of the organisation having been broadened to include research into energy supply in general, it is to be known in future as the Netherlands Energy Research Centre (ECN). (D.J.B.)

  12. The Structural Integrity Centre

    International Nuclear Information System (INIS)

    Tomkins, B.

    1987-01-01

    The paper concerns the development and work of the Structural Integrity Centre (SIC) at Risley Nuclear Laboratories, United Kingdom. The centre was set up to provide authoritative advice to plant designers and operators on the integrity and life assessment of structures and components across the reactor projects in the United Kingdom. A description is given of the structure and role of the SIC, as well as the Structural Integrity Assessment work. The assessment methods are described for thermally loaded structures and welded structures. Finally, defect significance assessment and environmental effects are outlined. (U.K.)

  13. Co-catalysis effect of different morphological facets of as prepared Ag nanostructures for the photocatalytic oxidation reaction by Ag–TiO{sub 2} aqueous slurry

    Energy Technology Data Exchange (ETDEWEB)

    Kaur, Rupinder; Pal, Bonamali, E-mail: bpal@thapar.edu

    2013-12-16

    This paper highlights the comparative co-catalytic efficiency of different shapes of prepared Ag nanoparticles of size much larger as well as smaller than titania for the Ag–TiO{sub 2} photocatalysis. Quantum sized Ag nanospheres (4{sup {sub 8}} nm), nanorod (length 70–75 nm and width 30–38 nm), polygonal nanosphere (80–120 nm) and truncated triangles (side length 70–140 nm) are prepared by solvothermal process. The co-catalytic activities of these Ag nanostructures were investigated by mixing them with TiO{sub 2} for the photocatalytic degradation of aqueous salicylic (0.5 mM) and benzoic acid (0.5 mM) under UV light (125 W-Hg arc, 10.4 mW cm{sup −2}) irradiation. The Ag co-catalysis effect imparted to TiO{sub 2} follows as polygonal nanosphere > nanorod > truncated triangle > small nanosphere due to the formation of many Ag–TiO{sub 2} interfaces by a single large-sized Ag nanoparticle than smaller one. As the surface coverage of Ag particles by TiO{sub 2} decreases, the Ag–TiO{sub 2} photoactivity is decreased accordingly. The efficient adsorption of salicylic acid to TiO{sub 2} surface through –COOH and –OH groups render its higher photodegradation rate (1.8–2.7 × 10{sup −2} μmol min{sup −1}) than benzoic acid (1.5–2.5 × 10{sup −2} μmol min{sup −1}) having one chelating –COOH group. Zeta potential and conductance measurement of photoreaction mixture were carried out to investigate the ionic interaction-adsorption of reactant substrates over Ag–TiO{sub 2} surface. - Graphical abstract: This study demonstrated the co-catalysis effect of relatively larger Ag nanostructures of different shapes than TiO{sub 2} for its improved photocatalytic activity during salicylic acid and benzoic acid degradation under UV light (125 W Hg-arc lamp, 10.4 mW cm{sup −2}) irradiation. The co-catalytic ability of Ag is found to exhibit as polygonal nanosphere > nanorod > truncated triangle > small nanosphere relative to bare TiO{sub 2

  14. Separation and preparation of xanthochymol and guttiferone E by high performance liquid chromatography and high speed counter-current chromatography combined with silver nitrate coordination reaction.

    Science.gov (United States)

    Li, Jun; Gao, Ruixi; Zhao, Dan; Huang, Xianju; Chen, Yu; Gan, Fei; Liu, Hui; Yang, Guangzhong

    2017-08-18

    Xanthochymol (XCM) and guttiferone E (GFE), a pair of π bond benzophenone isomers from Garcinia xanthochymus, were once reported to be difficult or impossible to separate. The present study reports the successful separation of these two isomers through high performance liquid chromatography (HPLC), as well as their effective isolation using high speed counter-current chromatography (HSCCC) based on the silver nitrate (AgNO 3 ) coordination reaction. First, an effective HPLC separation system was developed, achieving a successful baseline separation with resolution of 2.0. Based on the partition coefficient (K) resolved by HPLC, the two-phase solvent system was determined as n-hexane, methanol and water with the uncommon volume ratio of 4:6:1. A crude extract of Garcinia xanthochymus (0.2g) was purified by normal HSCCC and refined with AgNO 3 -HSCCC. Monomers of XCM and GFE were identified by HPLC, mass spectrometry (MS) and nuclear magnetic resonance (NMR). The results demonstrate the separation and isolation of π bond benzophenone isomers using ordinary octadecyl silane (C 18 ) columns and HSCCC. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Preparation and characterization of mechanically alloyed AB3-type based material LaMg2Ni5Al4 and its solid-gaz hydrogen storage reaction

    Science.gov (United States)

    Jaafar, Hassen; Aymard, Luc; Dachraoui, Walid; Demortière, Arnaud; Abdellaoui, Mohieddine

    2018-04-01

    We developed in the present paper the synthesis of a new AB3-type compound LaMg2Ni5Al4 by mechanical alloying (MA) process. ​​X-ray diffraction analysis (XRD) was used to determine the structural properties and the phase evolution of the powder mixtures. Two different synthesis pathways have been investigated. The first starting from elemental metals and the second from a mixture of two binary compounds LaNi5 (CaCu5-type structure, P6/mmm space group) and Al(Mg) solid solution (cubic Fm-3 m space group). The results show multiphase alloys which contain LaMg2Ni5Al4 main phase with hexagonal PuNi3-type structure (R-3 m space group). Rietveld analysis shows that using a planetary ball mill, we obtain a good yield of LaMg2Ni5Al4 compound after 5 h of mechanical alloying for both synthesis pathways. TEM analysis confirmed XRD results. SEM-EDX analysis of the final product was in agreement with the nominal chemical formula. A setup of possible solid-gaz hydrogenation reaction will be described so far at the end of this work. Electrochemical results demonstrate evidence on hydrogen absorption in the AB3 material and the discharge capacity was equal to 5.9 H/f.u.

  16. Preparation of polycrystalline FeTe{sub 1-x}S{sub x} (x = 0.00-0.30) via solid-state reaction method at ambient pressure

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Edmund H.H.; Liew, Josephine Y.C.; Awang Kechik, M.M.; Halim, S.A.; Chen, S.K. [Universiti Putra Malaysia (UPM), Department of Physics, Faculty of Science, Serdang, Selangor (Malaysia); Tan, K.B. [Universiti Putra Malaysia (UPM), Department of Chemistry, Faculty of Science, Serdang, Selangor (Malaysia); Qi, X. [National Cheng Kung University, Department of Materials Science and Engineering, Tainan City (China)

    2017-06-15

    Polycrystalline samples with nominal composition FeTe{sub 1-x}S{sub x} (x = 0.00-0.30) were synthesized via solid state reaction method with intermittent grinding in argon gas flow. X-ray diffraction (XRD) patterns revealed the tetragonal structure (space group P4/nmm) of the samples with the presence of impurities Fe{sub 3}O{sub 4} and FeTe{sub 2}. By substitution with S, the a and c lattice parameters shrink probably due to the smaller ionic radius of S{sup 2-} compared to Te{sup 2-}. Scanning electron microscopy images showed that the samples developed plate-like grains with increasing S substitution. Substitution of Te with S suppresses the structural transition of the parent compound FeTe as shown by both the temperature dependence of resistance and magnetic moment measurements. All of the S-substituted samples showed a rapid drop of resistance at around 9-10 K but zero resistance down to 4 K was not observed. In addition, negative magnetic moment corresponds to diamagnetism was detected in the samples for x = 0.25 and 0.30 suggesting the coexistence of magnetic and superconducting phase in these samples. The magnetization hysteresis loops measured at room temperature showed ferromagnetic behavior for the pure and S substituted samples. However, the magnetization, rentivity and coercivity decreased with S content. (orig.)

  17. The influence of reaction times on structural, optical and luminescence properties of cadmium telluride nanoparticles prepared by wet-chemical process

    Energy Technology Data Exchange (ETDEWEB)

    Kiprotich, Sharon, E-mail: KiprotichS@qwa.ufs.ac.za [Department of Physics, University of the Free State (QwaQwa campus), Private Bag X-13, Phuthaditjhaba 9866 (South Africa); Dejene, Francis B.; Ungula, Jatani [Department of Physics, University of the Free State (QwaQwa campus), Private Bag X-13, Phuthaditjhaba 9866 (South Africa); Onani, Martin O. [Departments of Chemistry, University of the Western Cape, Private Bag X17, Bellville 7535 (South Africa)

    2016-01-01

    This paper explains one pot synthesis of type II water soluble L-cysteine capped cadmium telluride (CdTe) core shell quantum dots using cadmium acetate, potassium tellurite and L-cysteine as the starting materials. The reaction was carried out in a single three necked flask without nitrogen under reflux at 100 °C. Results from PL show a sharp absorption excitonic band edge of the CdTe core with respect to the core shell which loses its shoulder during the growth of the shell on the core. The PL spectra indicate a drastic shift in emission window of the core which is simultaneously accompanied by an increase in emission intensity. X-ray diffraction pattern confirms the formation of hexagonal phase for all samples. Some difference in absorption edges were observed due to varying synthesis time of CdTe NPs. The position of the absorption band is observed to shift towards the lower wavelength side for shorter durations of synthesis.

  18. Effect of Zr addition on structure and electrical properties of SmFeO3 prepared by solid state reaction method

    Directory of Open Access Journals (Sweden)

    Abdalla M. Abdalla

    2017-12-01

    Full Text Available Series of Sm1-xFe1-3xZr3xO3 (SFZO, where x = 0.0, 0.01, 0.02, 0.033, 0.05, 0.1 and 0.15, was synthesised by the solid state reaction method and sintered at 1500 °C in air. X-ray diffraction (XRD and scanning electron microscopy (SEM were used to investigate the structure of the materials. The XRD results indicated that the pure SmFeO3 and Sm0.99Fe0.97Zr0.03O3 samples are single phase materials with an orthorhombic symmetry and Pbnm space group. The increase of Zr content (x ≥ 0.02 causes a phase change from single to two-phase system with orthorhombic (Pbnm and fluorite symmetry (Fm3m. The microstructural analyses showed that the Zr4+ doping resulted in an increase of porosity in the sintered SFZO compared to SmFeO3 sample. The direct current (DC electrical conductivity at 850 °C in air was found to be 0.045 S/cm and 0.007 S/cm for Sm0.99Fe0.97Zr0.03O3 and SmFeO3, respectively, showing a significant enhancement compared to the pure SmFeO3.

  19. FAST GC-FID METHOD FOR MONITORING ACIDIC AND BASIC CATALYTIC TRANSESTERIFICATION REACTIONS IN VEGETABLE OILS TO METHYL ESTER BIODIESEL PREPARATION

    Directory of Open Access Journals (Sweden)

    Renata Takabayashi Sato

    2016-04-01

    Full Text Available A fast gas chromatography with a flame ionisation detector (GC-FID method for the simultaneous analysis of methyl palmitate (C16:0, stearate (C18:0, oleate (C18:1, linoleate (C18:2 and linolenate (C18:3 in biodiesel samples was proposed. The analysis was conducted in a customised ionic-liquid stationary-phase capillary, SLB-IL 111, with a length of 14 m, an internal diameter of 0.10 mm, a film thickness of 0.08 µm and operated isothermally at 160 °C using hydrogen as the carrier gas at a rate of 50 cm s-1 in run time about 3 min. Once methyl myristate (C14:0 is present lower than 0.5% m/m in real samples it was used as an internal standard. The method was successful applied to monitoring basic and acidic catalysis transesterification reactions of vegetable oils such as soybean, canola, corn, sunflower and those used in frying process.

  20. Preparation of ternary Pt/Rh/SnO2 anode catalysts for use in direct ethanol fuel cells and their electrocatalytic activity for ethanol oxidation reaction

    Science.gov (United States)

    Higuchi, Eiji; Takase, Tomonori; Chiku, Masanobu; Inoue, Hiroshi

    2014-10-01

    Pt, Rh and SnO2 nanoparticle-loaded carbon black (Pt/Rh/SnO2/CB) catalysts with different contents of Pt and Rh were prepared by the modified Bönnemann method. The mean size and size distribution of Pt, Rh and SnO2 for Pt-71/Rh-4/SnO2/CB (Pt : Rh : Sn = 71 at.%: 4 at.%: 25 at.%) were 3.8 ± 0.7, 3.2 ± 0.7 and 2.6 ± 0.5 nm, respectively, indicating that Pt, Rh and SnO2 were all nanoparticles. The onset potential of ethanol oxidation current for the Pt-65/Rh-10/SnO2/CB and Pt-56/Rh-19/SnO2/CB electrodes was ca. 0.2 V vs. RHE which was ca. 0.2 V less positive than that for the Pt/CB electrode. The oxidation current at 0.6 V for the Pt/Rh/SnO2/CB electrode (ca. 2% h-1) decayed more slowly than that at the Pt/SnO2/CB electrode (ca. 5% h-1), indicating that the former was superior in durability to the latter. The main product of EOR in potentiostatic electrolysis at 0.6 V for the Pt-71/Rh-4/SnO2/CB electrode was acetic acid.

  1. A facile approach to prepare crumpled CoTMPyP/electrochemically reduced graphene oxide nanohybrid as an efficient electrocatalyst for hydrogen evolution reaction

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Juanjuan, E-mail: majj0518@hotmail.com [Department of Chemical Engineering, Huaihai Institute of Technology, Lianyungang 222005 (China); School of Materials Science and Engineering, Nanyang Technological University, 639798, Singapore (Singapore); Liu, Lin; Chen, Qian; Yang, Min [Department of Chemical Engineering, Huaihai Institute of Technology, Lianyungang 222005 (China); Wang, Danping [School of Materials Science and Engineering, Nanyang Technological University, 639798, Singapore (Singapore); Tong, Zhiwei [Department of Chemical Engineering, Huaihai Institute of Technology, Lianyungang 222005 (China); Chen, Zhong, E-mail: aszchen@ntu.edu.sg [School of Materials Science and Engineering, Nanyang Technological University, 639798, Singapore (Singapore)

    2017-03-31

    Highlights: • Crumpled CoTMPyP/ERGO hybrid was successfully prepared by a facile two-step process. • CoTMPyP nanoaggregates are homogeneously distributed over the graphene surface. • CoTMPyP/ERGO hybrid film shows good electrocatalytic activity and stability for HER. - Abstract: Elaborate design and synthesis of efficient and stable non-Pt electrocatalysts for some renewable energy related conversion/storage processes are one of the major goals of sustainable chemistry. Herein, we report a facile method to fabricate Co porphyrin functionalized electrochemically reduced graphene oxide (CoTMPyP/ERGO) thin film by direct assembly of oppositely charged tetrakis(N-methylpyridyl) porphyrinato cobalt (CoTMPyP) and GO nanosheets under mild conditions followed by an electrochemical reduction procedure. STEM analysis confirms that CoTMPyP nanoaggregates are homogeneously distributed over the graphene surface. The electrochemical properties of CoTMPyP/ERGO were investigated by cyclic voltammetry, linear sweep voltammetry and electrochemical impedance spectroscopy. The results demonstrate that CoTMPyP/ERGO nanohybrid film can serve as excellent electrocatalyst for hydrogen evolution in alkaline solution with high activity and stability. The intimate contact and efficient electron transfer between CoTMPyP and ERGO, as well as the crumpled structure, contribute to the improvement of the electrocatalytic performance.

  2. Chitosan-crosslinked gels prepared by a simultaneously occurring reaction of radiation-induced polymerization and self-bridging of acrylic acid in aqueous solutions

    International Nuclear Information System (INIS)

    Elhag Ali, Amr; Hegazy, Elsayed Ahmed; Hendri, John; Katakai, Ryoichi; Maekawa, Yasunari; Kume, Tamikazu; Yoshida, Masaru

    2001-01-01

    Chitosan is one of the most interesting natural polymers, in addition to its biodegradability it shows wide biological properties such as antifibrolastic and antimicrobial activities, which verify its biomedical application. Novel Acrylic acid/Chitosan hydrogel was prepared by means of γ-irradiation as a clean source for initiation, and crosslinking. The nature of the AAc/CS gel and the effect of the presence of chitosan on the behavior of AAc were characterized. The effect of pH on the degree of swelling of different gels and time course swelling studies show the effect of presence of chitosan and its molecular weight on the swelling of the gels. DSC and TGA were used to study the effect of the presence of chitosan on the thermal behavior of PAAc. It was found that chitosan change thermal behavior of AAc. These results support our assumption for the formation of crosslinking between PAAc and CS chains via polyelectrolyte complex formation, attributed to the high affinity between CS and AAc, accompanied by homopolymerization and self-bridging. This crosslinking increase with CS molecular weight increasing and affect the thermal behavior of PAAc. (author)

  3. Reactions of saccharides catalyzed by molybdate ions. XXXIII. Use of. cap alpha. (U-/sup 14/C)glucan for preparation of /sup 14/C-labelled saccharides

    Energy Technology Data Exchange (ETDEWEB)

    Bilik, V; Biely, P [Institute of Chemistry, Centre for Chemical Research, Slovak Academy of Sciences, Bratislava (Czechoslovakia); Kolina, J [Ustav pro Vyzkum, Vyrobu a Vyuziti Radioisotopu, Prague (Czechoslovakia)

    1984-01-01

    D-(U-/sup 14/C)glucose obtained in acid hydrolysis of ..cap alpha..-(U-/sup 14/C)glucan (2 M-HCl) was epimerized under a catalytic action of molybdate ions to D-(U-/sup 14/C)mannose isolated with a 20% yield. Oxidative degradation of 4-nitrophenylhydrazones of D-(U-/sup 14/C)arabinose and D-(U-/sup 14/C)xylose resulted in D-(U-/sup 14/C)erythrose and D-(U-/sup 14/C)threose, respectively, with a 15% yield relative to the starting aldopentoses. Nitromethane synthesis with D-(U-/sup 14/C)lyxose followed by oxidative decomposition of the corresponding nitrohexitols yielded /sup 14/C-labelled D-galactose. Described is also the preparation of D-(U-/sup 14/C)arabinose from D-(U-/sup 14/C)glucose and the conversion of D-(U-/sup 14/C)arabinose to D-(U-/sup 14/C)xylose and D-(U-/sup 14/C)lyxose.

  4. Preparation of YBa2Cu3O7-x superconducting solutions and films from alkoxide-based precursors using sol-gel method and investigation of their chemical reaction mechanisms

    International Nuclear Information System (INIS)

    Mutlu, Ibrahim Halil; Acun, Hediye; Celik, Erdal; Turkmen, Hasan

    2007-01-01

    In the development of coated superconductors sol-gel technique has been widely used as an effective processing method, especially in making long-length wires and tapes. However, one drawback associated with the deposition of YBa 2 Cu 3 O 7-x and Gd 2 O 3 buffer layer on Ni tape is the adhesion characteristic at interfaces YBCO-Gd 2 O 3 and Gd 2 O 3 -NiO and NiO-Ni substrate. In this paper, two strategies for adhesion enhancement of multilayered ceramic oxide coatings on Ni substrate were proposed: (1) formation of chemical bonds through surface condensation reactions, and development of ceramic networks through diffusion of alkoxide precursors. The current research has focused on the fabrication and adhesion of YBCO coatings on buffered Ni substrate using nine solutions prepared from Y, Ba and Cu alkoxides, solvent and chelating agent. Only two of YBCO solutions were successfully obtained while the rest of them were unsuccessful. Among these solutions we scrutinized chemical reaction mechanisms of a successful and an unsuccessful solution for comparison. How the chemical bonds and solubility were affected by the acids, base and solvents used in the solutions was demonstrated. It was shown that pH of the solution, homogeneity of the solution and gelation, steric affect of the chemicals in sol-gel solutions are significant issues to obtain high quality superconducting YBCO thin films. In addition, X-ray diffraction (XRD) was used to analyze phase structure of YBCO and compare results of chemical reactions obtained by a chemdraw programme. Scanning electron microscope (SEM) studies was carried out to examine microstructures of YBCO films produced from alkoxide precursors, solvent, chelating agent and modifying liquid chemical materials such as triethanolamine or ammonium hydroxide. It was found to be YBCO, Gd 2 O 3 , NiO and Ni phases in YBCO/Gd 2 O 3 /Ni sample from XRD analysis. That the solution prepared by using triethanolamine provided the best film quality and

  5. Reaction kinetics of polybutylene terephthalate polycondensation reaction

    NARCIS (Netherlands)

    Darda, P. J.; Hogendoorn, J. A.; Versteeg, G. F.; Souren, F.

    2005-01-01

    The kinetics of the forward polycondensation reaction of polybutylene terephthalate (PBT) has been investigated using thermogravimetric analysis (TGA). PBT - prepolymer with an initial degree of polymerization of 5.5 was used as starting material. The PBT prepolymer was prepared from dimethyl

  6. Centre for Political and

    African Journals Online (AJOL)

    user

    and definitions will be published and the data translated into the official ... The Centre provides a terminological and subject-related service to lecturers and ... postgraduate students in international politics, political studies and .... obtain financial contributions (cf. .... making of authoritative and enforceable rules (laws) for.

  7. Implementing Responsibility Centre Budgeting

    Science.gov (United States)

    Vonasek, Joseph

    2011-01-01

    Recently, institutes of higher education (universities) have shown a renewed interest in organisational structures and operating methodologies that generate productivity and innovation; responsibility centre budgeting (RCB) is one such process. This paper describes the underlying principles constituting RCB, its origin and structural elements, and…

  8. Fuel cycle centres

    International Nuclear Information System (INIS)

    Hagen, M.

    1977-01-01

    The concept of co-locating and integrating fuel cycle facilities at one site is discussed. This concept offers considerable advantages, especially in minimizing the amount of radioactive material to be transported on public roads. Safeguards and physical protection as relating to such an integrated system of facilities are analysed in detail, also industrial and commercial questions. An overall risk-benefit evaluation turns out to be in favour of fuel cycle centres. These centres seem to be specifically attractive with regard to the back end of the fuel cycle, including on-site disposal of radioactive wastes. The respective German approach is presented as an example. Special emphasis is given to the site selection procedures in this case. Time scale and cost for the implementation of this concept are important factors to be looked at. Since participation of governmental institutions in these centres seems to be indispensable their respective roles as compared to industry must be clearly defined. The idea of adjusting fuel cycle centres to regional rather than national use might be an attractive option, depending on the specific parameters in the region, though results of existing multinational ventures are inconclusive in this respect. Major difficulties might be expected e.g. because of different national safety regulations and standards as well as commercial conditions among partner countries. Public acceptance in the host country seems to be another stumbling block for the realization of this type of multinational facilities

  9. Budapest Training Technology Centre.

    Science.gov (United States)

    Budapest Training Technology Centre (Hungary).

    The Budapest Training Technology Centre (BTTC) grew out of a 1990 agreement calling for Great Britain to help Hungary develop and implement open and flexible training methods and technology-based training to support the labor force development and vocational training needs resulting from Hungary's transition to a market economy. The BTTC would be…

  10. Official Centre Hospitality

    International Development Research Centre (IDRC) Digital Library (Canada)

    Sylvain Dufour

    Approved by the Management Executive Committee. - 1 -. Version 3.1.0 effective 2017-06-28. Official Centre Hospitality. 1. Objective. 2. Application. 3. Definitions. 4. Roles and Responsibilities. 5. Authorization. 6. Consultants and Contractors. 7. Reimbursement. 1. Objective. To define the circumstances under which ...

  11. Academic Drug Discovery Centres

    DEFF Research Database (Denmark)

    Kirkegaard, Henriette Schultz; Valentin, Finn

    2014-01-01

    Academic drug discovery centres (ADDCs) are seen as one of the solutions to fill the innovation gap in early drug discovery, which has proven challenging for previous organisational models. Prior studies of ADDCs have identified the need to analyse them from the angle of their economic...

  12. ATLAS Visitors Centre

    CERN Multimedia

    claudia Marcelloni

    2009-01-01

    ATLAS Visitors Centre has opened its shiny new doors to the public. Officially launched on Monday February 23rd, 2009, the permanent exhibition at Point 1 was conceived as a tour resource for ATLAS guides, and as a way to preserve the public’s opportunity to get a close-up look at the experiment in action when the cavern is sealed.

  13. Reliable set-up for in-loop 11C-carboxylations using Grignard reactions for the preparation of [carbonyl-11C]WAY-100635 and [11C]-(+)-PHNO

    International Nuclear Information System (INIS)

    Rami-Mark, Christina; Ungersboeck, Johanna; Haeusler, Daniela; Nics, Lukas; Philippe, Cecile; Mitterhauser, Markus; Willeit, Matthaeus; Lanzenberger, Rupert; Karanikas, Georgios; Wadsak, Wolfgang

    2013-01-01

    Aim of this work was the implementation of a generalized in-loop synthesis for 11 C-carboxylations and subsequent 11 C-acylations on the TRACERlab FxC Pro platform. The set-up was tested using [carbonyl- 11 C]WAY-100635 and, for the first time, [ 11 C]-(+)-PHNO. Its general applicability could be demonstrated and both [carbonyl- 11 C]WAY-100635 and [ 11 C]-(+)-PHNO were prepared with high reliability and satisfying outcome. - Highlights: • Generalized method for in-loop 11 C-carboxylations implemented. • Grignard reactions successfully tested. • First in-loop procedure for [ 11 C]-(+)PHNO established. • Satisfactory synthesis outcome for both [carbonyl- 11 C]WAY-100635 and [ 11 C]-(+)PHNO. • No distillation for purification of intermediate required

  14. The redox-Mannich reaction.

    Science.gov (United States)

    Chen, Weijie; Seidel, Daniel

    2014-06-06

    A complement to the classic three-component Mannich reaction, the redox-Mannich reaction, utilizes the same starting materials but incorporates an isomerization step that enables the facile preparation of ring-substituted β-amino ketones. Reactions occur under relatively mild conditions and are facilitated by benzoic acid.

  15. Reaction Decoder Tool (RDT): extracting features from chemical reactions.

    Science.gov (United States)

    Rahman, Syed Asad; Torrance, Gilliean; Baldacci, Lorenzo; Martínez Cuesta, Sergio; Fenninger, Franz; Gopal, Nimish; Choudhary, Saket; May, John W; Holliday, Gemma L; Steinbeck, Christoph; Thornton, Janet M

    2016-07-01

    Extracting chemical features like Atom-Atom Mapping (AAM), Bond Changes (BCs) and Reaction Centres from biochemical reactions helps us understand the chemical composition of enzymatic reactions. Reaction Decoder is a robust command line tool, which performs this task with high accuracy. It supports standard chemical input/output exchange formats i.e. RXN/SMILES, computes AAM, highlights BCs and creates images of the mapped reaction. This aids in the analysis of metabolic pathways and the ability to perform comparative studies of chemical reactions based on these features. This software is implemented in Java, supported on Windows, Linux and Mac OSX, and freely available at https://github.com/asad/ReactionDecoder : asad@ebi.ac.uk or s9asad@gmail.com. © The Author 2016. Published by Oxford University Press.

  16. Low-coordinate rare-earth complexes of the asymmetric 2,4-di-tert-butylphenolate ligand prepared by redox transmetallation/protolysis reactions, and their reactivity towards ring-opening polymerisation.

    Science.gov (United States)

    Clark, Lawrence; Deacon, Glen B; Forsyth, Craig M; Junk, Peter C; Mountford, Philip; Townley, Josh P

    2010-08-07

    New trivalent lanthanoid aryloxide complexes have been prepared by redox transmetallation/protolysis (rtp) reactions using 2,4-di-tert-butylphenol (dbpH). Mononuclear octahedral complexes from tetrahydrofuran (thf) were of the type [Ln(dbp)(3)(thf)(3)] (Ln = La (1), Pr (2), Nd (3), Gd (4), Er (5)). The lanthanoid contraction results in the rather subtle change in stereochemistry from meridional (La, Pr, Nd, Gd) to facial (Er). An analogous reaction with neodymium in dimethoxyethane (dme), resulted in the isolation of the seven coordinate [Nd(dbp)(3)(dme)(2)] (6), and this is comparable with the thf complexes in terms of steric crowding. Dinuclear complexes of the type [Ln(2)(dbp)(6)(thf)(2)], (Ln = Nd (7), Er (8)) were obtained when 1 and 5 were recrystallised from toluene. These dimeric complexes contain two bridging and four terminal phenolates, as well as a single coordinated molecule of thf at each metal. A similar structural motif was observed for the products when the reaction was performed in diethyl ether, and in the absence of a solvent, yielding [Nd(2)(dbp)(6)(Et(2)O)(2)] (9) and [Nd(2)(dbp)(6)(dbpH)(2)] (10) respectively. Complexes 3 and 4 alone were efficient but poorly-controlled initiators for the ROP of rac-lactide, but with an excess of BnOH as a co-initiator they showed features consistent with immortal polymerisation. Use of BnNH(2) led to well-controlled, amine-initiated immortal ROP of rac-lactide, only the second report of this type of process for a group 3 or lanthanoid system.

  17. Effects of carbon source and carbon content on electrochemical performances of Li{sub 4}Ti{sub 5}O{sub 12}/C prepared by one-step solid-state reaction

    Energy Technology Data Exchange (ETDEWEB)

    Hu Xuebu [College of Chemistry and Materials Science, Sichuan Normal University, Chengdu, Sichuan 610066 (China); Chengdu Institute of Organic Chemistry, Chinese Academy of Sciences, Chengdu, Sichuan 610041 (China); Lin Ziji [China National Quality Supervision and Inspection Center for Alcoholic Beverage Products and Processed Food, Luzhou, Sichuan 646100 (China); Yang Kerun [Chengdu Institute of Organic Chemistry, Chinese Academy of Sciences, Chengdu, Sichuan 610041 (China); Hua, Yongjian [China Aviation Lithium Battery Co. Ltd., Luoyang, Henan 471009 (China); Deng Zhenghua, E-mail: zhdeng@cioc.ac.cn [Chengdu Institute of Organic Chemistry, Chinese Academy of Sciences, Chengdu, Sichuan 610041 (China)

    2011-05-30

    Highlights: > A simple route to prepare the Li{sub 4}Ti{sub 5}O{sub 12}/C by one-step solid-state reaction. > Carbon source and carbon content are two important factors on the electrochemical performances of Li{sub 4}Ti{sub 5}O{sub 12}/C. > As-prepared Li{sub 4}Ti{sub 5}O{sub 12}/C under optimized conditions shows excellent electrochemical performances. - Abstract: Li{sub 4}Ti{sub 5}O{sub 12}/C composites were synthesized by one-step solid-state reaction method using four commonly used organic compounds or organic polymers as carbon source, i.e., polyacrylate acid (PAA), citric acid (CA), maleic acid (MA) and polyvinyl alcohol (PVA). The physical characteristics of Li{sub 4}Ti{sub 5}O{sub 12}/C composites were investigated by X-ray diffraction, electron microscopy, Raman spectroscopy, particle size distribution and thermogravimetry-derivative thermogravimetry techniques. Their electrochemical properties were characterized by cyclic voltammograms, electrochemical impedance spectra, constant current charge-discharge and rate charge-discharge. These analyses indicated that the carbon source and carbon content have a great effect on the physical and electrochemical performances of Li{sub 4}Ti{sub 5}O{sub 12}/C composites. An ideal carbon source and appropriate carbon content effectively improved the electrical contact between the Li{sub 4}Ti{sub 5}O{sub 12} particles, which enhanced the discharge capacity and rate capability of Li{sub 4}Ti{sub 5}O{sub 12}/C composites. PAA was the best carbon source for the synthesis of Li{sub 4}Ti{sub 5}O{sub 12}/C composites. When the carbon content was 3.49 wt.% (LiOH.H{sub 2}O/PAA molar ratio of 1), as-prepared Li{sub 4}Ti{sub 5}O{sub 12}/C showed the maximum discharge capacity. At 0.2 C, initial capacity of the optimized sample was 168.6 mAh g{sup -1} with capacity loss of 2.8% after 50 cycles. At 8 and 10 C, it showed discharge capacities of 143.5 and 132.7 mAh g{sup -1}, with capacity loss of 8.7 and 9.9% after 50 cycles

  18. Elderly Care Centre

    Science.gov (United States)

    Wagiman, Aliani; Haja Bava Mohidin, Hazrina; Ismail, Alice Sabrina

    2016-02-01

    The demand for elderly centre has increased tremendously abreast with the world demographic change as the number of senior citizens rose in the 21st century. This has become one of the most crucial problems of today's era. As the world progress into modernity, more and more people are occupied with daily work causing the senior citizens to lose the care that they actually need. This paper seeks to elucidate the best possible design of an elderly care centre with new approach in order to provide the best service for them by analysing their needs and suitable activities that could elevate their quality of life. All these findings will then be incorporated into design solutions so as to enhance the living environment for the elderly especially in Malaysian context.

  19. International Data Centre (IDC)

    International Nuclear Information System (INIS)

    Johansson, P.

    2002-01-01

    The presentation outlines the International Data Centre (Indc) mission, objective and historical background. The Indc progressive commissioning and organizational plans are presented on charts. The IMS stations providing data to Indc operations and the global communication infrastructure are plotted on world maps. The various types of IMS data are thus listed as seismic, hydroacoustic, infrasound and radionuclide. Finally Indc products and services together with its main achievements are listed

  20. Historical centres: changing definitions

    Directory of Open Access Journals (Sweden)

    Roberta Lazzarotti

    2014-02-01

    Full Text Available Since the end of the Second World War, the architectural and planning culture has been showing a fluctuating attention to the theme of historical centres and their enhancement. First of all this uneven progress explains the difficulty to reach a homogeneous definition and this is still lacking. During a long phase of this period, the historical parts of the town were considered as objects to be preserved in an integral way, as urban monuments. This is mostly due to the high symbolic value of these settlements, that represent fundamental landmarks. Identity building and empowerment of local communities are indispensable conditions for any development programme, especially in the case of centres or other historic environments at risk of abandonment. The progressive evolution of this concept brings awareness of the impossibility of separating – either in analytical or in planning terms ­ historical centres from their urban and territorial contexts, which are linked by mutual, deep relationships. This article attempts to retrace the steps signaled by the publication of international documents and conventions, from the Charter of Gubbio (1960 to the Charter of Krakow and the European Landscape Convention (2000; they obviously represent particular points of view, not exhaustive of the richness of the positions in the debate, but extremely significant in terms of diffusion and consensus.

  1. DGNB certified Healthcare Centres

    DEFF Research Database (Denmark)

    Brunsgaard, Camilla; Larsen, Tine Steen

    2015-01-01

    for sustainability and wants a certification. This research investigates the decision‐making and design process (DMaDP) behind four DGNB certified Healthcare Centres (HCC) in Northern Jutland in Denmark. In general, knowledge about the DMaDP is important. However it is important to know what part DGNB plays...... a dialog about DGNB and energy concept is important even before anyone start sketching. Experiences with the different approaches will be further outlined in the paper.Future research has the intention to collect further knowledge about DGNB and DMaDP in practise. This project was limited to Healthcare...

  2. Town Centre Redevelopment Strategies

    DEFF Research Database (Denmark)

    Vagnby, Bo Hellisen

    After many years of urban growth Danish downtowns are facing some important choices. Shall the stake one-sidedly be on the town centres as driving forces for growth and 'city marketing', or do they still have a role to play in a broader socio-economic context? In the paper we look back on eight...... as slum clearence and urban renewal. To a certain extent parallels are drawn to international experiences, especially where these are of such a nature that they can be assumed transferred to Danish connctions. Conclusively, the strategies are discussed in the light of the turn of Danish urban planning...

  3. Magnetic and structural properties of Sr0.75La0.25FexCu0.20O19 (10.40≤x≤11.80) hexagonal ferrites prepared by the solid-state reaction

    International Nuclear Information System (INIS)

    Yang, Yujie; Shao, Juxiang; Wang, Fanhou; Liu, Xiansong; Feng, Shuangjiu; Huang, Duohui; Yang, Junsheng; Jin, Chengguo

    2016-01-01

    In this study, the hexaferrite magnetic powders and magnets according to the formula Sr 0.75 La 0.25 Fe x Cu 0.20 O 19 , where x ranging from 10.40 to 11.80 with a step of 0.2 were prepared by the solid-state reaction. X-ray diffraction was performed to investigate the microstructures of the magnetic powders. The results show that a single magnetoplumbite phase is obtained for the magnetic powders with Fe content (10.60≤x≤11.60). For the magnetic powders with Fe content (x) of 10.40 or 11.80, magnetic impurities appear in the structure. A field emission scanning electron microscopy was hired to explore the micrographs of the magnets. The hexaferrite magnets are formed of hexagonal-shaped crystals. A magnetic properties test instrument was used in order to study the magnetic properties of the magnets. The remanence and maximum energy product first increase with Fe content (x) from 10.40 to 11.00 and then begin to decrease when Fe content (x) continues to increase. While the intrinsic coercivity and magnetic induction coercivity first increase with Fe content (x) from 10.40 to 11.20 and then decrease when Fe content (x)>11.20. - Highlights: • The hexaferrite Sr 0.75 La 0.25 Fe x Cu 0.20 O 19 (10.40≤x≤11.80) magnetic powders and magnets were synthesized by the solid-state reaction. • The hexaferrite magnets are formed of hexagonal-shaped crystals. • At Fe content (x)=11.00, B r and (BH) max for the magnets reach the maximum values. At Fe content (x)=11.20, H cj and H cb for the magnets reach the maximum values.

  4. Comparison of planned menus and centre characteristics with foods and beverages served in New York City child-care centres.

    Science.gov (United States)

    Breck, Andrew; Dixon, L Beth; Kettel Khan, Laura

    2016-10-01

    The present study evaluated the extent to which child-care centre menus prepared in advance correspond with food and beverage items served to children. The authors identified centre and staff characteristics that were associated with matches between menus and what was served. Menus were collected from ninety-five centres in New York City (NYC). Direct observation of foods and beverages served to children were conducted during 524 meal and snack times at these centres between April and June 2010, as part of a larger study designed to determine compliance of child-care centres with city health department regulations for nutrition. Child-care centres were located in low-income neighbourhoods in NYC. Overall, 87 % of the foods and beverages listed on the menus or allowed as substitutions were served. Menu items matched with foods and beverages served for all major food groups by >60 %. Sweets and water had lower match percentages (40 and 32 %, respectively), but water was served 68 % of the time when it was not listed on the menu. The staff person making the food and purchasing decisions predicted the match between the planned or substituted items on the menus and the foods and beverages served. In the present study, child-care centre menus included most foods and beverages served to children. Menus planned in advance have potential to be used to inform parents about which child-care centre to send their child or what foods and beverages their enrolled children will be offered throughout the day.

  5. CAPTURING REALITY AT CENTRE BLOCK

    Directory of Open Access Journals (Sweden)

    C. Boulanger

    2017-08-01

    Full Text Available The Centre Block of Canada’s Parliament buildings, National Historic Site of Canada is set to undergo a major rehabilitation project that will take approximately 10 years to complete. In preparation for this work, Heritage Conservation Services (HCS of Public Services and Procurement Canada has been completing heritage documentation of the entire site which includes laser scanning of all interior rooms and accessible confined spaces such as attics and other similar areas. Other documentation completed includes detailed photogrammetric documentation of rooms and areas of high heritage value. Some of these high heritage value spaces present certain challenges such as accessibility due to the height and the size of the spaces. Another challenge is the poor lighting conditions, requiring the use of flash or strobe lighting to either compliment or completely eliminate the available ambient lighting. All the spaces captured at this higher level of detail were also captured with laser scanning. This allowed the team to validate the information and conduct a quality review of the photogrammetric data. As a result of this exercise, the team realized that in most, if not all cases, the photogrammetric data was more detailed and at a higher quality then the terrestrial laser scanning data. The purpose and motivation of this paper is to present these findings, as well provide the advantages and disadvantages of the two methods and data sets.

  6. Capturing Reality at Centre Block

    Science.gov (United States)

    Boulanger, C.; Ouimet, C.; Yeomans, N.

    2017-08-01

    The Centre Block of Canada's Parliament buildings, National Historic Site of Canada is set to undergo a major rehabilitation project that will take approximately 10 years to complete. In preparation for this work, Heritage Conservation Services (HCS) of Public Services and Procurement Canada has been completing heritage documentation of the entire site which includes laser scanning of all interior rooms and accessible confined spaces such as attics and other similar areas. Other documentation completed includes detailed photogrammetric documentation of rooms and areas of high heritage value. Some of these high heritage value spaces present certain challenges such as accessibility due to the height and the size of the spaces. Another challenge is the poor lighting conditions, requiring the use of flash or strobe lighting to either compliment or completely eliminate the available ambient lighting. All the spaces captured at this higher level of detail were also captured with laser scanning. This allowed the team to validate the information and conduct a quality review of the photogrammetric data. As a result of this exercise, the team realized that in most, if not all cases, the photogrammetric data was more detailed and at a higher quality then the terrestrial laser scanning data. The purpose and motivation of this paper is to present these findings, as well provide the advantages and disadvantages of the two methods and data sets.

  7. Electrocatalysts with platinum, cobalt and nickel preparations by mechanical alloyed and CVD for the reaction of oxygen reduction; Electrocatalizadores a base de platino, cobalto y niquel preparados por aleado mecanico y CVD para la reaccion de reduccion de oxigeno

    Energy Technology Data Exchange (ETDEWEB)

    Garcia C, M A [ININ, 52750 La Marquesa, Estado de Mexico (Mexico)

    2008-07-01

    In this research, the molecular oxygen reduction reaction (ORR) was investigated on electrocatalysts of Co, Ni, Pt and their alloys CoNi, PtCo, PtNi and PtCoNi by using H{sub 2}SO{sub 4} 0.5 and KOH 0.5 M solutions as electrolytes. The electrocatalysts were synthesized by Mechanical Alloying (MA) and Chemical Vapor Deposition (CVD) processes. For MA, metallic powders were processed during 20 h of milling in a high energy SPEX 8000 mill. For CVD, a hot-wall reactor was utilized and Co, Ni and Pt acetilactetonates were used as precursors. Films were deposited at a total pressure of 1 torr and temperatures of 400-450 C. Electrocatalysts were characterized by X-Ray Diffraction (XRD). Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Energy Dispersive X-Ray Spectroscopy (EDS). Electrocatalysts prepared by mechanical alloying showed a homogeneously dispersed agglomeration of particles with nano metric size. Electrocatalysts obtained by CVD showed, in some cases, non uniform films, with particles of nano metric size, as well. The electrocatalytic performance was evaluated by using the Rotating Disk Electrode technique (RDE). Electrocatalysts prepared by MA showed higher activity than those obtained by CVD. All electrocatalysts were evaluated in alkaline media. Only electrocatalysts containing Pt were evaluated in acid media, because those materials with Co, Ni and their alloys showed instability in acidic media. Most electrocatalysts followed a mechanism for the ORR producing a certain proportion of H{sub 2}O{sub 2}. All electrocatalysts, exhibited a fair or good electrocatalytic activity in comparison with other similar reported materials. It was found that MA and CVD are appropriate processes to prepare electrocatalysts for the ORR with particles of nano metric size and performing with an acceptable catalytic activity. PtCoNi 70-23-7% by MA and PtCoNi-CVD electrocatalysts showed the highest activity in alkaline media, while in acidic

  8. Preparation of beryllium hydride

    International Nuclear Information System (INIS)

    Bergeron, C.R.; Baker, R.W.

    1975-01-01

    Beryllium hydride of high bulk density, suitable for use as a component of high-energy fuels, is prepared by the pyrolysis, in solution in an inert solvent, of a ditertiary-alkyl beryllium. An agitator introduces mechanical energy into the reaction system, during the pyrolysis, at the rate of 0.002 to 0.30 horsepower per gallon of reaction mixture. (U.S.)

  9. Preparation of Ba1-xSrxWO4 and Ba1-xCaxWO4 films on tungsten plate by mechanically assisted solution reaction at room temperature

    International Nuclear Information System (INIS)

    Rangappa, Dinesh; Fujiwara, Takeshi; Watanabe, Tomoaki; Yoshimura, Masahiro

    2008-01-01

    Preparation of the alkaline earth tungstate films such as Ba 1-x Sr x WO 4 and Ba 1-x Ca x WO 4 on the tungsten substrate was studied with a simple solution process assisted with the ball rotation at room temperature. The solid solution formation and limitations, the effect of oxidizing agent H 2 O 2 and alkaline earth ions concentration on the dissolution of W substrate and the growth of Ba 1-x Sr x WO 4 and Ba 1-x Ca x WO 4 films were studied in detail. The ball rotation assistance plays a very important role to enhance the dissolution of the W substrate and mass transport of the reactant species such as alkaline earth ions and WO 4 2- ions onto the solid/solution interface region, where precipitation occurs. Therefore, the rate of film formation was accelerated by the ball rotation assistance to the reaction system. Ba-rich Ba 1-x Sr x WO 4 and Ba 1-x Ca x WO 4 films were formed without high energy or high temperature treatment

  10. Preparation of a poly(3'-azido-3'-deoxythymidine-co-propargyl methacrylate-co-pentaerythritol triacrylate) monolithic column by in situ polymerization and a click reaction for capillary liquid chromatography of small molecules and proteins.

    Science.gov (United States)

    Lin, Zian; Yu, Ruifang; Hu, Wenli; Zheng, Jiangnan; Tong, Ping; Zhao, Hongzhi; Cai, Zongwei

    2015-07-07

    Combining free radical polymerization with click chemistry via a copper-mediated azide/alkyne cycloaddition (CuAAC) reaction in a "one-pot" process, a facile approach was developed for the preparation of a poly(3'-azido-3'-deoxythymidine-co-propargyl methacrylate-co-pentaerythritol triacrylate) (AZT-co-PMA-co-PETA) monolithic column. The resulting poly(AZT-co-PMA-co-PETA) monolith showed a relatively homogeneous monolithic structure, good permeability and mechanical stability. Different ratios of monomers and porogens were used for optimizing the properties of a monolithic column. A series of alkylbenzenes, amides, anilines, and benzoic acids were used to evaluate the chromatographic properties of the polymer monolith in terms of hydrophobic, hydrophilic and cation-exchange interactions, and the results showed that the poly(AZT-co-PMA-co-PETA) monolith exhibited more flexible adjustment in chromatographic selectivity than that of the parent poly(PMA-co-PETA) and AZT-modified poly(PMA-co-PETA) monoliths. Column efficiencies for toluene, DMF, and formamide with 35,000-48,000 theoretical plates per m could be obtained at a linear velocity of 0.17 mm s(-1). The run-to-run, column-to-column, and batch-to-batch repeatabilities of the retention factors were less than 4.2%. In addition, the proposed monolith was also applied to efficient separation of sulfonamides, nucleobases and nucleosides, anesthetics and proteins for demonstrating its potential.

  11. Phosphorescent and thermoluminescent properties of SrAl{sub 2}O{sub 4}:Eu{sup 2+}, Dy{sup 3+} phosphors prepared by solid state reaction method

    Energy Technology Data Exchange (ETDEWEB)

    Mothudi, B.M., E-mail: mothubm@unisa.ac.za [Department of Physics, University of the Free State, P.O. Box 339, Bloemfontein, ZA 9300 (South Africa); Department of Physics, University of South Africa, P.O. Box 392, Pretoria, ZA 6031 (South Africa); Ntwaeaborwa, O.M. [Department of Physics, University of the Free State, P.O. Box 339, Bloemfontein, ZA 9300 (South Africa); Kumar, A.; Sohn, K. [Department of Material Science and Metallurgical Engineering, Sunchon National University, Sunchon, Chonam 540-742 (Korea, Republic of); Swart, H.C. [Department of Physics, University of the Free State, P.O. Box 339, Bloemfontein, ZA 9300 (South Africa)

    2012-05-15

    Long persistent SrAl{sub 2}O{sub 4}:Eu{sup 2+} phosphors co-doped with Dy{sup 3+} were prepared by the solid state reaction method. The main diffraction peaks of the monoclinic structure of SrAl{sub 2}O{sub 4} were observed in all the samples. The broad band emission spectra at 497 nm for SrAl{sub 2}O{sub 4}:Eu{sup 2+}, Dy{sup 3+} were observed and the emission is attributed to the 4f{sup 6}5d{sup 1} to 4f{sup 7} transition of Eu{sup 2+} ions. The samples annealed at 1100-1200 Degree-Sign C showed similar broad TL glow curves centered at 120 Degree-Sign C. The similar TL glow curves suggest that the traps responsible for them are similar. The long afterglow displayed by the phosphors annealed at different temperatures, may be attributed to the Dy{sup 3+} ions acting as the hole trap levels, which play an important role in prolonging the duration of luminescence.

  12. A disposal centre for immobilized nuclear waste

    International Nuclear Information System (INIS)

    1980-02-01

    This report describes a conceptual design of a disposal centre for immobilized nuclear waste. The surface facilities consist of plants for the preparation of steel cylinders containing nuclear waste immobilized in glass, shaft headframe buildings and all necessary support facilities. The underground disposal vault is located on one level at a depth of 1000 m. The waste cylinders are emplaced into boreholes in the tunnel floors. All surface and subsurface facilities are described, operations and schedules are summarized, and cost estimates and manpower requirements are given. (auth)

  13. Call Centre- Computer Telephone Integration

    Directory of Open Access Journals (Sweden)

    Dražen Kovačević

    2012-10-01

    Full Text Available Call centre largely came into being as a result of consumerneeds converging with enabling technology- and by the companiesrecognising the revenue opportunities generated by meetingthose needs thereby increasing customer satisfaction. Regardlessof the specific application or activity of a Call centre, customersatisfaction with the interaction is critical to the revenuegenerated or protected by the Call centre. Physical(v, Call centreset up is a place that includes computer, telephone and supervisorstation. Call centre can be available 24 hours a day - whenthe customer wants to make a purchase, needs information, orsimply wishes to register a complaint.

  14. Nuclear reactions

    International Nuclear Information System (INIS)

    Lane, A.M.

    1980-01-01

    In reviewing work at Harwell over the past 25 years on nuclear reactions it is stated that a balance has to be struck in both experiment and theory between work on cross-sections of direct practical relevance to reactors and on those relevant to an overall understanding of reaction processes. The compound nucleus and direct process reactions are described. Having listed the contributions from AERE, Harwell to developments in nuclear reaction research in the period, work on the optical model, neutron capture theory, reactions at doorway states with fine structure, and sum-rules for spectroscopic factors are considered in more detail. (UK)

  15. Preparation of bromine fluoride; Preparation du fluorure de brome

    Energy Technology Data Exchange (ETDEWEB)

    Domange, Pr; Duflo, J.

    1958-05-15

    This note addresses the preparation of bromine fluoride. It indicates the implemented process for the reaction, used products (fluorine and bromine), and column characteristics. It describes the operating mode. Apparatus drawing is provided.

  16. Present issues for centre de la Manche disposal facility

    International Nuclear Information System (INIS)

    Dutzer, M.; Vervialle, J.P.; Charton, P.

    2006-01-01

    Centre de la Manche disposal facility officially entered its institutional control period in January 2003. Andra performs monitoring of the environment and of the capping system in order to prepare further phases that should become more and more passive. A detailed 'long term memory' has been established in order to provide future generations with the relevant information about the facility. (author)

  17. Planning a multi-institutional information for development study centre

    CSIR Research Space (South Africa)

    Moreno, A

    2010-05-01

    Full Text Available . The I4D Study Centre tasks are to increase both the research expertise pool available for Meraka and the partner university, and the joint development of study programs with universities that will prepare students for a researcher career with an ICT4D...

  18. Preparing Haitian youth for digital jobs | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Haiti is currently the poorest country in the western hemisphere, with 80% of the ... One example is online outsourcing, which involves the contracting of ... Haitians; develop platforms for young Haitians to be matched with companies working in ...

  19. At the Computer Centre

    CERN Multimedia

    1983-01-01

    In preparation for the removal of of the ageing CDC 7600, a 1 megaword CYBER 170/835 and 1 megaword twin processor CYBER 170/875 were installed. The CYBER 835 was moved into production in August replacing the CYBER 720. On the successful introduction of the CYBER 875, the CYBER 720 was removed from service. (See Annual Report 1983 p.67.) The photo shows on foreground the two CDC computers, and on background the IBM 3081.

  20. Preparation of beryllium hydride

    International Nuclear Information System (INIS)

    Roberts, C.B.

    1975-01-01

    A process is described for preparing beryllium hydride by the direct reaction of beryllium borohydride and aluminum hydride trimethylamine adduct. Volatile by-products and unreacted reactants are readily removed from the product mass by sublimation and/or evaporation. (U.S.)

  1. Council celebrates CERN Control Centre

    CERN Multimedia

    2006-01-01

    With the unveiling of its new sign, the CERN Control Centre was officially inaugurated on Thursday 16 March. To celebrate its startup, CERN Council members visited the sleek centre, a futuristic-looking room filled with a multitude of monitoring screens.

  2. The Aube centre. 1997 statement

    International Nuclear Information System (INIS)

    1998-09-01

    Since January 1992 the Aube centre ensures the storage of 90% of the short life radioactive wastes produced in France. This educational booklet describes the organization of the activities in the centre from the storage of wastes to the radioactivity surveillance of the environment (air, surface and ground waters, river sediments, plants and milk). (J.S.)

  3. CANDU 9 Control Centre Mockup

    International Nuclear Information System (INIS)

    Webster, A.; Macbeth, M.J.

    1996-01-01

    This paper provides a summary of the design process being followed, the benefits of applying a systematic design using human factors engineering, presents an overview of the CANDU 9 control centre mockup facility, illustrates the control centre mockup with photographs of the 3D CADD model and the full scale mockup, and provides an update on the current status of the project. (author)

  4. Uptake properties of Ni2+ by nCaO.Al2O3.2SiO2 (n=1-4) prepared from solid-state reaction of kaolinite and calcite.

    Science.gov (United States)

    Jha, Vinay Kumar; Kameshima, Yoshikazu; Nakajima, Akira; Okada, Kiyoshi; MacKenzie, Kenneth J D

    2005-08-31

    A series of nCaO.Al2O3.2SiO2 samples (n=1-4) were prepared by solid-state reaction of mechanochemically treated mixtures of kaolinite and calcite fired at 600-1000 degrees C for 24 h. All the samples were X-ray amorphous after firing at 600-800 degrees C but had crystallized by 900 degrees C. The main crystalline phases were anorthite (n=1), gehlenite (n=2 and 3) and larnite (n=4). The uptake of Ni2+ by nCaO.Al2O3.2SiO2 samples fired at 800 and 900 degrees C was investigated at room temperature using solutions with initial Ni2+ concentrations of 0.1-50 mmol/l. Amorphous samples (fired at 800 degrees C) showed a higher Ni2+ uptake capacity than crystalline samples (fired at 900 degrees C). Ni2+ uptake was found to increase with increasing of CaO content. Amorphous 4CaO.Al2O3.2SiO2 showed the highest Ni2+ uptake capacity (about 9 mmol/g). The Ni2+ uptake abilities of the present samples are higher than those of other materials reported in the literature. Since the sorbed Ni2+/released Ca2+ ratios of these samples are close to unity, ion replacement of Ni2+ for Ca2+ is thought to be the principal mechanism of Ni2+ uptake by the present samples.

  5. RTEMS CENTRE- RTEMS Improvement

    Science.gov (United States)

    Silva, Helder; Constantino, Alexandre; Freitas, Daniel; Coutinho, Manuel; Faustino, Sergio; Sousa, Jose; Dias, Luis; Zulianello, Marco

    2010-08-01

    During the last two years, EDISOFT's RTEMS CENTRE team [1], jointly with the European Space Agency and with the support of the worldwide RTEMS community [2], have been developing an activity to facilitate the qualification of the real-time operating system RTEMS (Real-Time Operating System for Multiprocessor Systems). This paper intends to give a high level visibility of the progress and the results obtained in the RTEMS Improvement [3] activity. The primary objective [4] of the project is to improve the RTEMS product, its documentation and to facilitate the qualification of RTEMS for future space missions, taking into consideration the specific operational requirements. The sections below provide a brief overview of the RTEMS operating system and the activities performed in the RTEMS Improvement project, which includes the selection of API managers to be qualified, the tailoring process, the requirements analysis, the reverse engineering and design of the RTEMS, the quality assurance process, the ISVV activities, the test campaign, the results obtained, the criticality analysis and the facilitation of qualification process.

  6. Thailand's nuclear research centre

    International Nuclear Information System (INIS)

    Yamkate, P.

    2001-01-01

    The Office of Atomic Energy for Peace, Thailand, is charged with three main tasks, namely, Nuclear Energy development Plan, Utilization of Nuclear Based technology Plan and Science and Technology Plan. Its activities are centred around the research reactor TRR-1/M1. The main areas of contribution include improvement in agricultural production, nuclear medicine and nuclear oncology, health care and nutrition, increasing industrial productivity and efficiency and, development of cadre competent in nuclear science and technology. The office also has the responsibility of ensuring nuclear safety, radiation safety and nuclear waste management. The office has started a new project in 1997 under which a 10 MWt research reactor, an isotope production facility and a waste processing and storage facility would be set up by General Atomic of USA. OAEP has a strong linkage with the IAEA and has been an active participant in RCA programmes. In the future OAEP will enhance its present capabilities in the use of radioisotopes and radiation and look into the possibility of using nuclear energy as an alternative energy resource. (author)

  7. The Adult Education Centre

    Directory of Open Access Journals (Sweden)

    Olga Drofenik

    1997-01-01

    Full Text Available The Adult Education Centre has drafted the professional foundations for the Master Plan for Adult Education which, according to the provisions stipulated in the Adult Education Act, will be adopted by the Parliament. The Master Plan specifies the goals, priority target groups, priority areas and a draft financial projection. The professional foundations include the ratings of adult education in studies about adult education trends in Slovenia and abroad. The paper presents research results relevant to the Master Plan and documents issued by international organizations, including research into the Decisive Global Factors of EC Development after 1992, the Report of Ministers of the OECD, and the Economic Development Strategy of Slovenia . All the above-mentioned documents emphasize the importance of life­long learning in achieving a more fulfilling personal life, faster economic growth and maintenance of social ties. In principle, the same views are shared in Slovenia. However, in practice the "multi-dimensional" nature of adult education often gives way to "education for production". This is why we especially stress the importance of adult education in the social and cultural context.

  8. The Nuclear Data Commission and the Radionuclide Data Centre in Russia

    International Nuclear Information System (INIS)

    1994-12-01

    The document includes two papers: 'The Work of the Nuclear Data Commission' and 'Radionuclide Data Centre', which describe the activities of these two organizations of the Russian Federation. A separate abstract was prepared for each paper

  9. "Giving us hope": Parent and neonatal staff views and expectations of a planned family-centred discharge process (Train-to-Home).

    Science.gov (United States)

    Ingram, Jenny; Redshaw, Maggie; Manns, Sarah; Beasant, Lucy; Johnson, Debbie; Fleming, Peter; Pontin, David

    2017-08-01

    Preparing families and preterm infants for discharge is relatively unstructured in many UK neonatal units (NNUs). Family-centred neonatal care and discharge planning are recommended but variable. Qualitative interviews with 37 parents of infants in NNUs, and 18 nursing staff and 5 neonatal consultants explored their views of discharge planning and perceptions of a planned family-centred discharge process (Train-to-Home). Train-to-Home facilitates communication between staff and parents throughout the neonatal stay, using a laminated train and parent booklets. Parents were overwhelmingly positive about Train-to-Home. They described being given hope, feeling in control and having something visual to show their baby's progress. They reported positive involvement of fathers and families, how predicted discharge dates helped them prepare for home and ways staff engaged with Train-to-Home when communicating with them. Nursing staff reactions were mixed-some were uncertain about when to use it, but found the visual images powerful. Medical staff in all NNUs were positive about the intervention recognizing that it helped in communicating better with parents. Using a parent-centred approach to communication and informing parents about the needs and progress of their preterm infant in hospital is welcomed by parents and many staff. This approach meets the recommended prioritization of family-centred care for such families. Predicted discharge dates helped parents prepare for home, and the ways staff engaged with Train-to-Home when communicating with them helped them feel more confident as well as having something visual to show their baby's progress. © 2016 The Authors. Health Expectations Published by John Wiley & Sons Ltd.

  10. The Aube centre; Le Centre de l`Aube

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This educational booklet is devoted to a general presentation of the Aube radioactive wastes storage centre. After a short presentation of the Andra, the French national agency for the management of radioactive wastes, it gives some general information about radioactive wastes (origin, classification), containers (quality assurance and different types), wastes transportation (planning, safety), and about the Aube centre itself: description, treatment and conditioning of drums (compacting and injection), storage facilities, geological situation of the site, and environmental controls. (J.S.)

  11. Introducing the PET Centre Prague

    International Nuclear Information System (INIS)

    Belohlavek, O.

    2001-01-01

    The PET Centre Prague (www.homolka.cz/nm) was established in 1999 as the outcome of a joint project of the public Na Homolce Hospital and the Nuclear Research Institute Rez, plc, the Czech radiopharmaceutical producer. Technical and financial assistance was provided by the International Atomic Energy Agency, which perceived the Centre as its model project that could serve as a guide for the development of PET centres in countries sharing a comparable level of development with the Czech Republic. The article maps the history of the project, its design, workplace lay-out and equipment, radiation protection arrangements and spectrum of the first approx. 3000 investigations. (author)

  12. IAEA establishes International Seismic Safety Centre

    International Nuclear Information System (INIS)

    2008-01-01

    Full text: The IAEA today officially inaugurated an international centre to coordinate efforts for protecting nuclear installations against the effects of earthquakes. The International Seismic Safety Centre (ISSC), which has been established within the IAEA's Department of Nuclear Safety and Security, will serve as a focal point on seismic safety for nuclear installations worldwide. ISSC will assist countries on the assessment of seismic hazards of nuclear facilities to mitigate the consequences of strong earthquakes. 'With safety as our first priority, it is vital that we pool all expert knowledge available worldwide to assist nuclear operators and regulators to be well prepared for coping with major seismic events,' said Antonio Godoy, Acting Head of the IAEA's Engineering Safety Section and leader of the ISSC. 'The creation of the ISSC represents the culmination of three decades of the IAEA's active and recognized involvement in this matter through the development of an updated set of safety standards and the assistance to Member States for their application.' To further seismic safety at nuclear installations worldwide, the ISSC will: - Promote knowledge sharing among the international community in order to avoid or mitigate the consequences of extreme seismic events on nuclear installations; - Support countries through advisory services and training courses; and - Enhance seismic safety by utilizing experience gained from previous seismic events in member states. The centre is supported by a scientific committee of high-level experts from academic, industrial and nuclear safety authorities that will advise the ISSC on implementation of its programme. Experts have been nominated from seven specialized areas, including geology and tectonics, seismology, seismic hazard, geotechnical engineering, structural engineering, equipment, and seismic risk. Japan and the United States have both contributed initial funds for creation of the centre, which will be based at

  13. Reversibility of oxidation and aggregation of impurity in the system of potassium halide monocrystal-phosphite molecular centre

    International Nuclear Information System (INIS)

    Lebedev, A.V.; Bogdanova, T.G.; Vasil'ev, I.A.; Mel'nikova, I.N.

    1980-01-01

    Thermo- and radiation-stimulated reversible reaction of oxidation and aggregation of phosphorus in the composition of phosphite molecular centre in the matrix of potassium iodide are studied. It is shown that in the process of isothermal annealing and γ-radiolysis in the matrix of potassium iodide destruction of phosphite molecular centre takes place. It is established that it is accompanied by oxidation of trivalent phosphorus and aggregation of the formed phosphorus-oxygen anions. Reduction of the initial phosphite centre during the sample hardening is explained by the reverse reaction as a result of which electron-exceeding centres of the base are destructed and reduction of phosphorus takes place

  14. The influences of mole composition of strontium (x) on properties of barium strontium titanate (Ba{sub 1−x}Sr{sub x}TiO{sub 3}) prepared by solid state reaction method

    Energy Technology Data Exchange (ETDEWEB)

    Sandi, Dianisa Khoirum; Supriyanto, Agus; Iriani, Yofentina, E-mail: yopen-2005@yahoo.com [Physics Department, Faculty of Mathematics and Natural Science, Sebelas Maret University (Indonesia); Jamaluddin, Anif [Physics Department, Faculty of Teacher Training and Education, Sebelas Maret University (Indonesia)

    2016-02-08

    Barium Strontium Titanate (Ba{sub 1-x}Sr{sub x}TiO{sub 3}) or BST was prepared by solid state reaction method. Raw materials are BaCO{sub 3}, SrCO{sub 3}, and TiO{sub 2}. Those materials are mixed for 8 h, pressed, and sintered at temperature 1200°C for 2 h. Mole composition of Sr (x) was varied to study its influences on structural, morphological, and electrical properties of BST. Variation of (x) are x = 0; x = 0.1; and x = 0.5. XRD patterns showed a single phase of BST, which mean that mixture of raw materials was homogenous. Crystal structure was influenced by x. BaTiO{sub 3} and Ba{sub 0.9}Ti{sub 0.1}TiO{sub 3} have tetragonal crystal structure, while Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} is cubic. The diffraction angle shifted to right side (angle larger) as the increases of x. Crystalline size of BaTiO{sub 3}, Ba{sub 0.9}Sr{sub 0.1}TiO{sub 3}, and Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} are 38.13 nm; 38.62 nm; and 37.13 nm, respectively. SEM images showed that there are still of pores which were influenced by x. Ba{sub 0.9}Sr{sub 0.1}TiO{sub 3} has densest surface (pores are few and small in size). Sawyer Tower circuit showed that BaTiO{sub 3} and Ba{sub 0.9}Sr{sub 0.1} TiO{sub 3} is ferroelectric, while Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} is paraelectric. The dielectric constants of BaTiO{sub 3}, Ba{sub 0.9}Sr{sub 0.1}TiO{sub 3} and Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} at frequency of 1 KHz are 156; 196; and 83, respectively. Ba{sub 0.9}Sr{sub 0.1}TiO{sub 3} has relatively highest dielectric constant. It is considered that Ba{sub 0.9}Sr{sub 0.1}TiO{sub 3} has densest surface.

  15. The centre of the action

    CERN Multimedia

    2008-01-01

    The CERN Control Centre (CCC) has all the ingredients of an action movie control room: hundreds of screens, technicians buzzing in and out, huge floor-to-ceiling windows revealing the looming vista of a mountain range, flashing lights, microphones… This is the place where not just the LHC, but the whole of CERN’s accelerator complex and technical support is based - truly the centre of the action at CERN.

  16. Training centres - organization and management

    International Nuclear Information System (INIS)

    Kovar, P.

    1986-01-01

    In the lecture 'Training centres - organization and management' some principles and requirements which influence the organization, management and activity pattern of nuclear training centres, are briefly introduced. It is demonstrated, step by step, how these general principles are implemented in the development of the Czechoslovak nuclear power programme, it means, how the training of the NPP personnel proceeds in Czechoslovak nuclear training centres. General principles which are selected: a connection between the capacity of the training centre and the scope and needs of the nuclear power programme, a position of the training center within the institutional set-up, a structure and organization of the training system which complies with the system of NPP construction, reflect the pattern and the activity of the nuclear training centre and nuclear power technical level, a research group of workers in the nuclear training centre, main tasks and technical facilities, management of the training process and a transfer of knowledge and research results into the training process. The lecture is supplemented by pictures and slides. (orig.)

  17. Quasielastic reactions

    International Nuclear Information System (INIS)

    Henning, W.

    1979-01-01

    Quasielastic reaction studies, because of their capability to microscopically probe nuclear structure, are still of considerable interest in heavy-ion reactions. The recent progress in understanding various aspects of the reaction mechanism make this aim appear closer. The relation between microscopic and macroscopic behavior, as suggested, for example, by the single proton transfer data to individual final states or averaged excitation energy intervals, needs to be explored. It seems particularly useful to extend measurements to higher incident energies, to explore and understand nuclear structure aspects up to the limit of the energy range where they are important

  18. RTEMS Centre - Support and Maintenance Centre to RTEMS Operating System

    Science.gov (United States)

    Silva, H.; Constantino, A.; Freitas, D.; Coutinho, M.; Faustino, S.; Mota, M.; Colaço, P.; Sousa, J.; Dias, L.; Damjanovic, B.; Zulianello, M.; Rufino, J.

    2009-05-01

    RTEMS CENTRE - Support and Maintenance Centre to RTEMS Operating System is a joint ESA/Portuguese Task Force initiative to develop a support and maintenance centre to the Real-Time Executive for Multiprocessor Systems (RTEMS). This paper gives a high level visibility of the progress, the results obtained and the future work in the RTEMS CENTRE [6] and in the RTEMS Improvement [7] projects. RTEMS CENTRE started officially in November 2006, with the RTEMS 4.6.99.2 version. A full analysis of RTEMS operating system was produced. The architecture was analysed in terms of conceptual, organizational and operational concepts. The original objectives [1] of the centre were primarily to create and maintain technical expertise and competences in this RTOS, to develop a website to provide the European Space Community an entry point for obtaining support (http://rtemscentre.edisoft.pt), to design, develop, maintain and integrate some RTEMS support tools (Timeline Tool, Configuration and Management Tools), to maintain flight libraries and Board Support Packages, to develop a strong relationship with the World RTEMS Community and finally to produce some considerations in ARINC-653, DO-178B and ECSS E-40 standards. RTEMS Improvement is the continuation of the RTEMS CENTRE. Currently the RTEMS, version 4.8.0, is being facilitated for a future qualification. In this work, the validation material is being produced following the Galileo Software Standards Development Assurance Level B [5]. RTEMS is being completely tested, errors analysed, dead and deactivated code removed and tests produced to achieve 100% statement and decision coverage of source code [2]. The SW to exploit the LEON Memory Management Unit (MMU) hardware will be also added. A brief description of the expected implementations will be given.

  19. cycloaddition reactions

    Indian Academy of Sciences (India)

    Unknown

    Molecular Modeling Group, Organic Chemical Sciences, Indian Institute of Chemical Technology,. Hyderabad ... thus obtained are helpful to model the regioselectivity ... compromise to model Diels–Alder reactions involving ...... acceptance.

  20. Preparation of beryllium hydride

    International Nuclear Information System (INIS)

    Lowrance, B.R.

    1975-01-01

    A process is described for the preparation of beryllium hydride which comprises pyrolyzing, while in solution in a solvent inert under the reaction conditions, with respect to reactants and products and at a temperature in the range of about 100 0 to about 200 0 C, sufficient to result in the formation of beryllium hydride, a di-t-alkyl beryllium etherate wherein each tertiary alkyl radical contains from 4 to 20 carbon atoms. The pyrolysis is carried out under an atmosphere inert under the reaction conditions, with respect to reactants and products. (U.S.)

  1. Comparison of planned menus and centre characteristics with foods and beverages served in New York City child-care centres

    Science.gov (United States)

    Breck, Andrew; Dixon, L Beth; Khan, Laura Kettel

    2016-01-01

    Objective The present study evaluated the extent to which child-care centre menus prepared in advance correspond with food and beverage items served to children. The authors identified centre and staff characteristics that were associated with matches between menus and what was served. Design Menus were collected from ninety-five centres in New York City (NYC). Direct observation of foods and beverages served to children were conducted during 524 meal and snack times at these centres between April and June 2010, as part of a larger study designed to determine compliance of child-care centres with city health department regulations for nutrition. Setting Child-care centres were located in low-income neighbourhoods in NYC. Results Overall, 87% of the foods and beverages listed on the menus or allowed as substitutions were served. Menu items matched with foods and beverages served for all major food groups by > 60%. Sweets and water had lower match percentages (40 and 32%, respectively), but water was served 68% of the time when it was not listed on the menu. The staff person making the food and purchasing decisions predicted the match between the planned or substituted items on the menus and the foods and beverages served. Conclusions In the present study, child-care centre menus included most foods and beverages served to children. Menus planned in advance have potential to be used to inform parents about which child-care centre to send their child or what foods and beverages their enrolled children will be offered throughout the day. PMID:27280341

  2. Bhabha Atomic Research Centre annual report : 1989

    International Nuclear Information System (INIS)

    1991-01-01

    The main thrust of the various research and development (R and D) activities of the Bhabha Atomic Research Centre (BARC), Bombay, is towards the implementation of India's nuclear power programme. To that end, its R and D activities cover the entire nuclear fuel cycle, reactor technology; applications of radioisotopes and radiations in agriculture, medicine and industries; and radiation protection in nuclear installations. The report presents in summarised form the R and D activities carried out during 1989 in the chapters entitled: Physical Sciences, Chemical Sciences, Materials and Materials Sciences, Radioisotopes, Reactors, Fuel Cycle, Radiological Safety and Protection, Electronics and Instrumentation, Engineering Services, Life Sciences and General. At the end of each chapter, a list of publications by the staff scientists in the corresponding subject field is given. The list includes published journal articles and technical reports, and papers presented at conferences, symposia etc. The report also covers the R and D activities of the outstation units of BARC, namely, Nuclear Research Laboratory, Srinagar; High Altitude Research Laboratory, Gulmarg; and Variable Energy Cyclotron Centre, Calcutta. BARC is also engaged in basic an applied research in frontier areas of science such as plasma and fusion physics, accelerators and lasers, high temperature superconductivity, condensed matter physics, high pressure physics, high resolution spectroscopy, chemical reaction dynamics and laser induced chemistry, electronics and robotics: radiation biology, and genetic engineering. Report is illustrated with a number of figures, graphs, and coloured pictures. (M.G.B.) figs., refs

  3. Asian collaboration on nuclear reaction data compilation

    International Nuclear Information System (INIS)

    Aikawa, Masayuki; Furutachi, Naoya; Kato, Kiyoshi; Makinaga, Ayano; Devi, Vidya; Ichinkhorloo, Dagvadorj; Odsuren, Myagmarjav; Tsubakihara, Kohsuke; Katayama, Toshiyuki; Otuka, Naohiko

    2013-01-01

    Nuclear reaction data are essential for research and development in nuclear engineering, radiation therapy, nuclear physics and astrophysics. Experimental data must be compiled in a database and be accessible to nuclear data users. One of the nuclear reaction databases is the EXFOR database maintained by the International Network of Nuclear Reaction Data Centres (NRDC) under the auspices of the International Atomic Energy Agency. Recently, collaboration among the Asian NRDC members is being further developed under the support of the Asia-Africa Science Platform Program of the Japan Society for the Promotion of Science. We report the activity for three years to develop the Asian collaboration on nuclear reaction data compilation. (author)

  4. Bhabha Atomic Research Centre : annual report 1990

    International Nuclear Information System (INIS)

    1992-01-01

    Research and development (R and D) activities of the Bhabha Atomic Research Centre (BARC) carried out during 1990 are reported. The main thrust of the R and D activities of BARC is on : (1)providing support to the nuclear power programme, (2)designing, building and utilising research reactors, (3)working in related frontline technologies, and also (4)basic research in frontier areas of science. These activities are described in brief under the chapters entitled : (1)Physical Sciences (2)Chemical Sciences (3)Materials and Material Science (4)Radioisotopes (5)Reactions (6)Fuel Cycle (7)Radiological Safety and Protection (8)Electronics and Instrumentation (9)Engineering Services (10)Life Sciences and (11)General. At the end of each chapter a list of papers and reports published in the subject field indicated by the title of the chapter is given. (N.B.). figs., tabs

  5. CMS tracker slides into centre stage

    CERN Document Server

    2006-01-01

    As preparations for the magnet test and cosmic challenge get underway, a prototype tracker has been carefully inserted into the centre of CMS. The tracker, in its special platform, is slowly inserted into the centre of CMS. The CMS prototype tracker to be used for the magnet test and cosmic challenge coming up this summer has the same dimensions -2.5 m in diameter and 6 m in length- as the real one and tooling exactly like it. However, the support tube is only about 1% equipped, with 2 m2 of silicon detectors installed out of the total 200 m2. This is already more than any LEP experiment ever used and indicates the great care needed to be taken by engineers and technicians as these fragile detectors were installed and transported to Point 5. Sixteen thousand silicon detectors with a total of about 10 million strips will make up the full tracker. So far, 140 modules with about 100 000 strips have been implanted into the prototype tracker. These silicon strips will provide precision tracking for cosmic muon...

  6. The ideal Atomic Centre; Le Centre Atomique ideal

    Energy Technology Data Exchange (ETDEWEB)

    Mas, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The author presents considerations which should prove to be of interest to all those who have to design, to construct and to operate a nuclear research centre. A large number of the ideas presented can also be applied to non-nuclear scientific research centres. In his report the author reviews: various problems with which the constructor is faced: ground-plan, infrastructure, buildings and the large units of scientific equipment in the centre, and those problems facing the director: maintenance, production, supplies, security. The author stresses the relationship which ought to exist between the research workers and the management. With this aim in view he proposes the creation of National School for Administration in Research which would train administrative executives for public or private organisations; they would be specialised in the fields of fundamental or applied research. (author) [French] L'auteur propose une base de reflexions a tous ceux qui doivent concevoir, realiser et faire vivre un Centre d'Etudes Nucleaires. Un grand nombre des idees exprimees peut d'ailleurs s'appliquer a un Centre d'Etudes Scientifiques non nucleaires. Dans son ouvrage, l'auteur passe en revue les differents problemes qui se posent au constructeur: plan, masse, infrastructure, batiments et grands appareils du Centre, et ceux qu'a a resoudre le directeur: entretien, fabrication, approvisionnements, securite. L'auteur insiste sur l'aspect des rapports qui doivent exister entre les chercheurs et ceux qui les administrent. Il propose a cette fin la creation d'une Ecole Nationale d'Administration de la Recherche qui formerait des cadres administratifs pour les organismes publics ou prives, specialises dans la Recherche fondamentale ou appliquee. (auteur)

  7. Porous electrode preparation method

    Science.gov (United States)

    Arons, R.M.; Dusek, J.T.

    1983-10-18

    A porous sintered plaque is provided with a bimodal porosity that is especially well suited for use as an electrode within a molten carbonate fuel cell. The coarse porosity is sufficient for admitting gases into contact with the reaction surfaces while the fine porosity is wetted with and retains molten electrolyte on the reaction sites. The electrode structure is prepared by providing a very fine powder of such as nickel oxide and blending the powder with a suitable decomposable binder to form a solid mass. The mass is comminuted into agglomerate size particles substantially larger than the fine oxide particles and formed into a cohesive compact for subsequent sintering. Sintering is carried out at sufficient conditions to bind the agglomerates together into a porous structure having both coarse and fine porosity. Where lithiated nickel oxide cathodes are prepared, the sintering conditions can be moderate enough to retain substantial quantities of lithium within the electrode for adequate conductivity. 2 figs.

  8. The Glaser–Hay reaction

    DEFF Research Database (Denmark)

    Vilhelmsen, Mie Højer; Jensen, Jonas; Tortzen, Christian

    2013-01-01

    The oxidative Glaser–Hay coupling of two terminal alkynes to furnish a butadiyne is a key reaction for acetylenic scaffolding. Although the reaction is performed under rather simple conditions [CuCl/TMEDA/O2 (air)], the mechanism is still under debate. Herein we present detailed studies...... on the scope of this reaction by using both 13C NMR and UV/Vis spectroscopic methods. The former method was used to study the kinetics of the coupling of aryl-substituted alkynes as the aryl carbon resonances of the reactants and products have similar NOEs and relaxation times. The reaction was found...... to be zero-order with respect to the terminal alkyne reactant under standard preparative conditions. Moreover, as the reaction proceeded, a clear change to slower reaction kinetics was observed, but it was still apparently zero-order. The onset of this change was found to depend on the catalyst loading...

  9. Annual report 1992 - Austrian Research Centre Seibersdorf

    International Nuclear Information System (INIS)

    Hillebrand, G.

    1994-01-01

    This is a non-technical progress report (in English) of the activities of the Research Centre Seibersdorf in the fields of energy and safety, materials research, isotope and radiation techniques, environment protection, health and food and industrial consulting. Within other non nuclear related highlights the newly built radio-pharmaceutical laboratory is described, which will guarantee the reliable supply of products and develop new diagnostic and therapeutic preparations. A newly developed whole-body counter for measuring internal radiation is in use in the Vienna General Hospital to obtain better information of the patient's metabolism and can thus assess the efficiency of pharmaceuticals. The research in the field of toxicology and carcinogenicity was intensified. Geological dating was performed for the 'Continental Deep-Drilling Programme' on behalf of the Max Planck Institute. Environmental data acquisition was mainly conducted in the field of ozone, water quality, air pollution and electro-smog (quittner, rieger)

  10. Annual report 1992 - Austrian Research Centre Seibersdorf

    International Nuclear Information System (INIS)

    Hillebrand, G.

    1994-01-01

    This is a non-technical progress report (in German) of the activities of the Research Centre Seibersdorf in the fields of energy and safety, materials research, isotope and radiation techniques, environment protection, health and food and industrial consulting. Within other non nuclear related highlights the newly built radio-pharmaceutical laboratory is described, which will guarantee the reliable supply of products and develop new diagnostic and therapeutic preparations. A newly developed whole-body counter for measuring internal radiation is in use in the Vienna General Hospital to obtain better information of the patient's metabolism and can thus assess the efficiency of pharmaceuticals. The research in the field of toxicology and carcinogenicity was intensified. Geological dating was performed for the 'Continental Deep-Drilling Programme' on behalf of the Max Planck Institute. Environmental data acquisition was mainly conducted in the field of ozone, water quality, air pollution and electro-smog (quittner, rieger)

  11. Direct Reactions

    Energy Technology Data Exchange (ETDEWEB)

    Austern, N. [University of Pittsburgh, Pittsburgh, PA (United States)

    1963-01-15

    In order to give a unified presentation of one point of view, these lectures are devoted only to a detailed development of the standard theories of direct reactions, starting from basic principles. Discussion is given of the present status of the theories, of the techniques used for practical calculation, and of possible future developments. The direct interaction (DI) aspects of a reaction are those which involve only a few of the many degrees of freedom of a nucleus. In fact the minimum number of degrees of freedom which must be involved in a reaction are those required to describe the initial and final channels, and DI studies typically consider these degrees of freedom and no others. Because of this simplicity DI theories may be worked out in painstaking detail. DI processes concern only part of the wave function for a problem. The other part involves complicated excitations of many degrees of freedom, and gives the compound nucleus (CN) effects. While it is extremely interesting to learn how to separate DI and CN effects in an orderly manner, if they are both present in a reaction, no suitable method has yet been found. Instead, current work stresses the kinds of reactions and the kinds of final states in which DI effects dominate and in which CN effects may almost be forgotten. The DI cross-sections which are studied are often extremely large, comparable to elastic scattering cross-sections. (author)

  12. The effect of reaction temperature on the room temperature ferromagnetic property of sol-gel derived tin oxide nanocrystal

    Science.gov (United States)

    Sakthiraj, K.; Hema, M.; Balachandra Kumar, K.

    2018-06-01

    In the present study, nanocrystalline tin oxide materials were prepared using sol-gel method with different reaction temperatures (25 °C, 50 °C, 75 °C & 90 °C) and the relation between the room temperature ferromagnetic property of the sample with processing temperature has been analysed. The X-ray diffraction pattern and infrared absorption spectra of the as-prepared samples confirm the purity of the samples. Transmission electron microscopy images visualize the particle size variation with respect to reaction temperature. The photoluminescence spectra of the samples demonstrate that luminescence process in materials is originated due to the electron transition mediated by defect centres. The room temperature ferromagnetic property is observed in all the samples with different amount, which was confirmed using vibrating sample magnetometer measurements. The saturation magnetization value of the as-prepared samples is increased with increasing the reaction temperature. From the photoluminescence & magnetic measurements we accomplished that, more amount of surface defects like oxygen vacancy and tin interstitial are created due to the increase in reaction temperature and it controls the ferromagnetic property of the samples.

  13. The Belgian nuclear research centre

    International Nuclear Information System (INIS)

    Moons, F.

    2001-01-01

    The Belgian Nuclear Research Centre is almost exclusively devoted to nuclear R and D and services and is able to generate 50% of its resources (out of 75 million Euro) by contract work and services. The main areas of research include nuclear reactor safety, radioactive waste management, radiation protection and safeguards. The high flux reactor BR2 is extensively used to test fuel and structural materials. PWR-plant BR3 is devoted to the scientific analysis of decommissioning problems. The Centre has a strong programme on the applications of radioisotopes and radiation in medicine and industry. The centre has plans to develop an accelerator driven spallation neutron source for various applications. It has initiated programmes to disseminate correct information on issues of nuclear energy production and non-energy nuclear applications to different target groups. It has strong linkages with the IAEA, OECD-NEA and the Euratom. (author)

  14. Technical support and emergency centre

    International Nuclear Information System (INIS)

    Bohun, L.; Kapisovsk y, M.

    1997-01-01

    This paper presents technical support and emergency management center which will be on two places: Mochovce NPP Emergency Centre (Technical support center and Support working center) and Reserve Emergency Centre in Levice (Reserve emergency center and Environmental Evaluation Center). The main aims of the emergency management centers are: the management and coordination of all persons and organisations; provision of the all information needed to evaluation of the accident and its mitigation; continuous evaluation of the potential or real radiological consequences; taking measure for an early notification of the governmental bodies and the organizations, warning and protection of the public; and other aims. In the next part the data for technical support and emergency centre are discussed

  15. Presentation of TVO's visitor's centre

    International Nuclear Information System (INIS)

    Aemmaelae, V.M.

    1993-01-01

    There are four nuclear power plant units in Finland, two of which are PWR's owned by Imatran Voima Oy. The two BWR units are located at Olkiluoto and owned by Teollisuuden Voima Oy. This presentation tells about TVO's concept of informing the visitors at Olkiluoto. At the site there are located, in addition to the two nuclear power plant units, the intermediate storage for spent fuel, the repository for low and medium-active waste as well as the training centre. At the Olkiluoto Visitor's Centre all the activities of the company are presented using varied audio-visual aids. The centre has several exhibits and there are also different installations to show how the plant works. (author)

  16. F-centre luminescence in nanocrystalline CeO2

    International Nuclear Information System (INIS)

    Aškrabić, S; Dohčević-Mitrović, Z D; Araújo, V D; Ionita, G; De Lima, M M Jr; Cantarero, A

    2013-01-01

    Nanocrystalline CeO 2 powders were synthesized by two cost-effective methods: the self-propagating room temperature (SPRT) method and the precipitation method. Differently prepared samples exhibited different temperature-dependent photoluminescence (PL) in the ultraviolet and visible regions. The PL signals originated from different kinds of oxygen-deficient defect centres with or without trapped electrons (F 0 , F + or F ++ centres). The temperature-dependent PL spectra were measured using different excitation lines, below (457, 488 and 514 nm) or comparable (325 nm) to the ceria optical band gap energy, in order to investigate the positions of intragap localized defect states. Evidence for the presence of F + centres was supported by the signals observed in electron paramagnetic resonance (EPR) measurements. Based on PL and EPR measurements it was shown that F + centres dominate in the CeO 2 sample synthesized by the SPRT method, whereas F 0 centres are the major defects in the CeO 2 sample synthesized by the precipitation method. The luminescence from F ++ states, as shallow trap states, was registered in both samples. Energy level positions of these defect states in the ceria band gap were proposed. (paper)

  17. F-centre luminescence in nanocrystalline CeO2

    Science.gov (United States)

    Aškrabić, S.; Dohčević-Mitrović, Z. D.; Araújo, V. D.; Ionita, G.; de Lima, M. M., Jr.; Cantarero, A.

    2013-12-01

    Nanocrystalline CeO2 powders were synthesized by two cost-effective methods: the self-propagating room temperature (SPRT) method and the precipitation method. Differently prepared samples exhibited different temperature-dependent photoluminescence (PL) in the ultraviolet and visible regions. The PL signals originated from different kinds of oxygen-deficient defect centres with or without trapped electrons (F0, F+ or F++ centres). The temperature-dependent PL spectra were measured using different excitation lines, below (457, 488 and 514 nm) or comparable (325 nm) to the ceria optical band gap energy, in order to investigate the positions of intragap localized defect states. Evidence for the presence of F+ centres was supported by the signals observed in electron paramagnetic resonance (EPR) measurements. Based on PL and EPR measurements it was shown that F+ centres dominate in the CeO2 sample synthesized by the SPRT method, whereas F0 centres are the major defects in the CeO2 sample synthesized by the precipitation method. The luminescence from F++ states, as shallow trap states, was registered in both samples. Energy level positions of these defect states in the ceria band gap were proposed.

  18. Reaction mechanisms

    International Nuclear Information System (INIS)

    Nguyen Trong Anh

    1988-01-01

    The 1988 progress report of the Reaction Mechanisms laboratory (Polytechnic School, France), is presented. The research topics are: the valence bond methods, the radical chemistry, the modelling of the transition states by applying geometric constraints, the long range interactions (ion - molecule) in gaseous phase, the reaction sites in gaseous phase and the mass spectroscopy applications. The points of convergence between the investigations of the mass spectroscopy and the theoretical chemistry teams, as well as the purposes guiding the research programs, are discussed. The published papers, the conferences, the congress communications and the thesis, are also reported [fr

  19. International Development Research Centre Act Loi sur le Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    1 juin 2009 ... research includes any scientific or technical inquiry or experimentation that is .... data centres and facilities for research and other activ- ities;. (b) initiate and ..... Loi sur la pension de la fonction publique ne s'applique pas aux ...

  20. Scheduling participants of Assessment Centres

    DEFF Research Database (Denmark)

    Lysgaard, Jens; Løber, Janni

      Assessment Centres are used as a tool for psychologists and coaches to observe a number of dimensions in a person's behaviour and test his/her potential within a number of chosen focus areas. This is done in an intense course, with a number of different exercises which expose each participant...... Centres usually last two days and involve 3-6 psychologists or trained coaches as assessors. An entire course is composed of a number of rounds, with each round having its individual duration. In each round, the participants are divided into a number of groups with prespecifed pairing of group sizes...

  1. Training centres in Latin America

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1959-04-15

    Early 1958 the Brazilian representative on the Board of Governors of the International Atomic Energy Agency - supported by the Governors from Argentina and Guatemala -proposed that a study should be made of the possibility of setting up one or more atomic energy training centres in Latin America. On the Board's recommendation, the Director General of the Agency appointed a fact-finding team to make anon-the-spot study. In drafting this report the team was invited to consider the following points: (a) The need for establishing one or more regional training centres; (b) Existing facilities that are being or could be used for training, together with technical data concerning them; (c) The general scientific technological and industrial conditions of the countries visited insofar as they have a bearing on their training needs and capabilities. The authors of the report conclude that 'a training centre in radio-botany should provide vitally needed knowledge and vitally needed specialists to all the agricultural installations in Latin America. A training centre like this might provide an excellent model upon which to base training centres in other areas'. The report recommends that: 1. The Agency should meet the requests of Latin American universities by, for example, supplying equipment and sending experts; 2. At least one specialized training centre should be established as soon as possible. Taking as an example the field of radio-botany, such a centre would provide trained specialists in radio-botany to agricultural institutions throughout Latin America and also provide basic research results vital to agriculture. The cost of new facilities might be of the order of $7 500 000, with an annual budget of approximately $650 000. Staff required: 40 scientists and 175 employees; 3. Whenever it appears feasible to gather necessary staff of high creative ability and established productivity and when funds can be made available for facilities, equipment and operating costs, at

  2. Training centres in Latin America

    International Nuclear Information System (INIS)

    1959-01-01

    Early 1958 the Brazilian representative on the Board of Governors of the International Atomic Energy Agency - supported by the Governors from Argentina and Guatemala -proposed that a study should be made of the possibility of setting up one or more atomic energy training centres in Latin America. On the Board's recommendation, the Director General of the Agency appointed a fact-finding team to make anon-the-spot study. In drafting this report the team was invited to consider the following points: (a) The need for establishing one or more regional training centres; (b) Existing facilities that are being or could be used for training, together with technical data concerning them; (c) The general scientific technological and industrial conditions of the countries visited insofar as they have a bearing on their training needs and capabilities. The authors of the report conclude that 'a training centre in radio-botany should provide vitally needed knowledge and vitally needed specialists to all the agricultural installations in Latin America. A training centre like this might provide an excellent model upon which to base training centres in other areas'. The report recommends that: 1. The Agency should meet the requests of Latin American universities by, for example, supplying equipment and sending experts; 2. At least one specialized training centre should be established as soon as possible. Taking as an example the field of radio-botany, such a centre would provide trained specialists in radio-botany to agricultural institutions throughout Latin America and also provide basic research results vital to agriculture. The cost of new facilities might be of the order of $7 500 000, with an annual budget of approximately $650 000. Staff required: 40 scientists and 175 employees; 3. Whenever it appears feasible to gather necessary staff of high creative ability and established productivity and when funds can be made available for facilities, equipment and operating costs, at

  3. Logistics centres development in Latvia

    Directory of Open Access Journals (Sweden)

    I. Kabashkin

    2007-12-01

    Full Text Available In the situation where a large increase in trade and freight transport volumes in the Baltic Sea region (BSR is expected and in which the BSR is facing a major economic restructuring, eff orts to achieve more integrated and sustainable transport and communication links within the BSR are needed. One of these eff orts is the development of logistics centres (LCs and their networking, which will continue to have an impact on improving communication links, spatial planning practices and approaches, logistics chain development and the promotion of sustainable transport modes. These factors will refl ect on logistics processes both in major gateway cities and in remote BSR areas. The importance of logistics systems as a whole is not seen clearly enough. Logistics actors see that logistics operations are not appreciated as much as other fi elds of activity. In addition, logistics centres and the importance of logistics activities to the business life of areas and the employment rate should be brought up better. In the paper main goal and tasks of national approach to LCs development are discussed. Strategic focus of new activities in this area is on the integration of various networks within and between logistics centres in order to improve and develop the quality of logistics networks as well as to spatially widen the networking activities. The key objectives are to integrate the links between logistics centres, ports and other logistics operators in a functional and sustainable way, to promote spatial integration by creating sustainable and integrated approaches to spatial planning of logistics centres and transport infrastructure, to improve ICT-based networking and communication practices of the fi elds of transport and logistics and to increase the competence of logistics centres and associated actors by organising educational and training events. The current activities include, for example, the creation of measures for transport networking and

  4. Allergic reactions

    Science.gov (United States)

    ... that don't bother most people (such as venom from bee stings and certain foods, medicines, and pollens) can ... person. If the allergic reaction is from a bee sting, scrape the ... more venom. If the person has emergency allergy medicine on ...

  5. Formaldehyde in the Galactic Centre

    International Nuclear Information System (INIS)

    Cohen, R.J.; Few, R.W.

    1981-01-01

    Formaldehyde 6-cm absorption in the direction of the Galactic Centre has been surveyed using the Jodrell Bank MK II radio telescope (beam-width 10 x 9 arcmin). The observations sample the region - 2 0 = 0 and - 0 0 .5 = 0 .5, with a velocity range of 620 km s -1 , a velocity resolution of 2.1 km s -1 and an rms noise level of approximately 0.03 K. The data are presented as contour maps showing line temperature as a function of latitude and velocity (b-V maps) and as a function of longitude and velocity (l-V maps). Similar maps of the line-to-continuum ratio are also presented. The radial distribution of formaldehyde (H 2 CO) in the Galactic Centre region is derived using two different kinematic models which give similar results. Formaldehyde is strongly concentrated in the Galactic Centre in a layer of latitude extent approximately 0 0 .5 and longitude extent approximately 4 0 which contains one quarter of all the H 2 CO in the Galaxy. The distribution is centred on l approximately 1 0 . The individual H 2 CO features are described in detail. (author)

  6. The DEMETER Science Mission Centre

    Czech Academy of Sciences Publication Activity Database

    Lagoutte, D.; Brochot, J.; Y.; de Carvalho, D.; Elie, F.; Harivelo, F.; Hobara, Y.; Madrias, L.; Parrot, M.; Pincon, J. L.; Berthelier, J. J.; Peschard, D.; Seran, E.; Gangloff, M.; Sauvaud, J. A.; Lebreton, J. P.; Štverák, Štěpán; Trávníček, Pavel M.; Grygorczuk, J.; Slominski, J.; Wronowski, R.; Barbier, S.; Bernard, P.; Gaboriaud, A.; Wallut, J. M.

    2006-01-01

    Roč. 54, č. 5 (2006), s. 428-440 ISSN 0032-0633 Institutional research plan: CEZ:AV0Z30420517 Keywords : Mission Centre * Data processing Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 1.509, year: 2006

  7. CENTRE OF THE MAIN INTERESTS

    Directory of Open Access Journals (Sweden)

    DIANA DELEANU

    2013-05-01

    Full Text Available The centre of the main interests of the debtor is a legal tool meant to settle conflicts that can arise between jurisdictions in cross-border insolvencies, based on the principles of mutual recognition and co-operation.

  8. Personnel Preparation.

    Science.gov (United States)

    Fair, George, Ed.; Stodden, Robert, Ed.

    1981-01-01

    Three articles comprise a section on personnel preparation in vocational education. Articles deal with two inservice programs in career/vocational education for the handicapped and a project to train paraprofessionals to assist special educators in vocational education. (CL)

  9. Solution preparation

    International Nuclear Information System (INIS)

    Seitz, M.G.

    1982-01-01

    Reviewed in this statement are methods of preparing solutions to be used in laboratory experiments to examine technical issues related to the safe disposal of nuclear waste from power generation. Each approach currently used to prepare solutions has advantages and any one approach may be preferred over the others in particular situations, depending upon the goals of the experimental program. These advantages are highlighted herein for three approaches to solution preparation that are currently used most in studies of nuclear waste disposal. Discussion of the disadvantages of each approach is presented to help a user select a preparation method for his particular studies. Also presented in this statement are general observations regarding solution preparation. These observations are used as examples of the types of concerns that need to be addressed regarding solution preparation. As shown by these examples, prior to experimentation or chemical analyses, laboratory techniques based on scientific knowledge of solutions can be applied to solutions, often resulting in great improvement in the usefulness of results

  10. The CCCB is a cultural centre, not a tourist centre

    Directory of Open Access Journals (Sweden)

    Elena Xirau

    2004-04-01

    Full Text Available Last February, Barcelona's Centre of Contemporary Culture (CCCB celebrated its first ten years in existence. During this time, this institution has looked to be a showcase to the most modern and innovative cultural expressions focused on reflecting on the concept of the city. In this interview, Josep Ramoneda offers his personal view, as the CCCB's director. He talks of how this cultural project was born, of how the concept of the institution took shape in the CCCB, of its relations with Barcelona's Strategic Plan, of how the project has evolved, of the architectural remodelling of the Casa de la Caritat building for its conversion into a cultural centre, of the relations with other institutions and its future.

  11. Gestion du Centre | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le Comité de gestion du Centre (CGC) est composé des membres de la haute direction du CRDI, notamment les directeurs de nos quatre bureaux régionaux et de nos principaux secteurs de programme. Le CGC travaille en collaboration avec le président afin de soutenir la recherche pour le développement, lui fournissant ...

  12. RTEMS CENTRE- Support and Maintenance CENTRE to RTEMS Operating System

    Science.gov (United States)

    Silva, H.; Constantino, A.; Coutunho, M.; Freitas, D.; Faustino, S.; Mota, M.; Colaço, P.; Zulianello, M.

    2008-08-01

    RTEMS stands for Real-Time Operating System for Multiprocessor Systems. It is a full featured Real Time Operating System that supports a variety of open APIs and interface standards. It provides a high performance environment for embedded applications, including a fixed-priority preemptive/non-preemptive scheduler, a comprehensive set of multitasking operations and a large range of supported architectures. Support and maintenance CENTRE to RTEMS operating system (RTEMS CENTRE) is a joint initiative of ESA-Portugal Task force, aiming to build a strong technical competence in the space flight (on- board) software, to offer support, maintenance and improvements to RTEMS. This paper provides a high level description of the current and future activities of the RTEMS CENTRE. It presents a brief description of the RTEMS operating system, a description of the tools developed and distributed to the community [1] and the improvements to be made to the operating system, including facilitation for the qualification of RTEMS (4.8.0) [2] for the space missions.

  13. Synthesis, characterisation, luminescence and defect centres in solution combustion synthesised CaZrO3:Tb3+ phosphor

    International Nuclear Information System (INIS)

    Singh, Vijay; Watanabe, S.; Gundu Rao, T.K.; Al-Shamery, Katharina; Haase, Markus; Jho, Young-Dahl

    2012-01-01

    Tb 3+ doped CaZrO 3 has been prepared by an easy solution combustion synthesis method. The combustion derived powder was investigated by X-ray diffraction, Fourier-transform infrared spectrometry and scanning electron microscopy techniques. A room temperature photoluminescence study showed that the phosphors can be efficiently excited by 251 nm light with a weak emission in the blue and orange region and a strong emission in green light region. CaZrO 3 :Tb 3+ exhibits three thermoluminescence (TL) glow peaks at 126 °C, 200 °C and 480 °C. Electron Spin Resonance (ESR) studies were carried out to study the defect centres induced in the phosphor by gamma irradiation and also to identify the centres responsible for the TL peaks. The room temperature ESR spectrum of irradiated phosphor appears to be a superposition of two distinct centres. One of the centres (centre I) with principal g-value 2.0233 is identified as an O − ion. Centre II with an axial symmetric g-tensor with principal values g ⊥ =1.9986 and g ⊥ =2.0023 is assigned to an F + centre (singly ionised oxygen vacancy). An additional defect centre is observed during thermal annealing experiments and this centre (assigned to F + centre) seems to originate from an F centre (oxygen vacancy with two electrons). The F centre and also the F + centre appear to correlate with the observed high temperature TL peak in CaZrO 3 :Tb 3+ phosphor. - Highlights: ► Powder phosphor of CaZrO 3 :Tb 3+ was prepared by an easy solution combustion synthesis method. ► The phosphor exhibits a bright green emission at 545 nm ( 5 D 4 → 7 F 5 ) of the Tb 3+ ion. ► Electron Spin Resonance studies have been carried out to identify the defect centres responsible for the observed thermoluminescence peaks.

  14. Ethylene homo- and copolymerization chain-transfers: A perspective from supported (n BuCp) 2 ZrCl 2 catalyst active centre distribution

    KAUST Repository

    Atiqullah, Muhammad

    2015-04-01

    Polymerization chain termination reactions and unsaturation of the polymer backbone end are related. Therefore, in this study, the parameters resulting from the modelling of the active centre distribution of the supported catalyst - silica/MAO/(nBuCp)2ZrCl2 - were applied to evaluate the active-centre-dependent ethylene homo- and copolymerization rates, as well as the corresponding chain termination rates. This approach, from a microkinetic mechanistic viewpoint, elucidates better the 1-hexene-induced positive comonomer effect and chain transfer phenomenon. The kinetic expressions, developed on the basis of the proposed polymerization mechanisms, illustrate how the active site type-dependent chain transfer phenomenon is influenced by the different apparent termination rate constants and momoner concentrations. The active centre-specific molecular weight M ni (for the above homo- and copolymer), as a function of chain transfer probability, p CTi, varied as follows: log (p C Ti) = log (mwru) - log (Mn i), where mw ru is the molecular weight of the repeat unit. The physical significance of this finding has been explained. The homo- and copolymer backbones showed all the three chain end unsaturations (vinyl, vinylidene, and trans-vinylene). The postulated polymerization mechanisms reveal the underlying polymer chemistry. The results of the present study will contribute to develop in future supported metallocene catalysts that will be useful to synthesize polyethylene precursors having varying chain end unsaturations, which can be eventually used to prepare functional polyethylenes. [Figure not available: see fulltext.] © 2015 Indian Academy of Sciences.

  15. Neighbourhood Centres – Organisation, Management and Finance

    DEFF Research Database (Denmark)

    Larsen, Jacob Norvig

    to identify different financial models and analyse economic sustainability. As regards organisational and management models data were collected through documentary sources and by means of personal interviews and field visits to ten centres. Even within the analysed limited population of centres economic...... public subsidy. Some of the centres have high number of users on a daily basis, whereas others are only rarely used. It is explored how organisation, management and financial set-up differs among the centres. Quantitative data on financial issues and annual accounts of fifteen centres were analysed...... and institutional sustainability varies significantly. In organisational terms centres range from fully-integrated in the municipal administration to independent voluntary managed centres. In terms of financial, or economic, models variation is less pronounced as all centres to some degree are dependent on current...

  16. Institutional Support : Centre for Research and Technology ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    year-old science and technology research centre at Maseno University in western Kenya. The Centre focuses on science and technology research to influence both national policies and development practices at the community level. Currently ...

  17. Japanese maintenance centres strive for greater realism

    International Nuclear Information System (INIS)

    Nedderman, J.

    1987-01-01

    Japanese utilities have devoted considerable efforts to ensuring that realistic plant conditions are simulated at their maintenance centres. In some centres, eg that of Kansai Electric Power Co, realism extends to difficult access, limited lighting and restricted ventilation. (author)

  18. Report: Cultural Research Centre (CRC)

    OpenAIRE

    Cross-Cultural Foundation of Uganda

    2010-01-01

    This report arises from research carried out in Iganga and Namutumba districts in late 2006/early 2007 by the Cultural Research Centre (CRC), based in Jinja. Our research focus was to gauge the impact of using Lusoga as a medium of instruction (since 2005 in "pilot" lower primary classes) within and outside the classroom. This initiative was in response to a new set of circumstances in the education sector in Uganda, especially the introduction by Government of teaching in local languages in ...

  19. Radwaste Treatment Centre Jaslovske Bohunice

    International Nuclear Information System (INIS)

    2000-01-01

    In this leaflet the Bohunice Radwaste Treatment Centre (BSC RAO) is presented. BSC RAO is designed to process and treat liquid and solid radwaste, arising from the NPP A-1 decommissioning, from NPPs V-1, V-2, and Mochovce operations, as well as institutional radwaste of diverse institutional (hospitals, research institutes) in the Slovak Republic. Transport, sorting, incineration, compacting, concentration and cementation of radwaste as well as monitoring of emission are described

  20. Quasielastic reactions

    International Nuclear Information System (INIS)

    Hansen, O.

    1983-01-01

    A brief review is presented of the experimental and theoretical situation regarding transfer reactions and inelastic scattering. In the first category there is little (very little) precision data for heavy projectiles and consequently almost no experience with quantitative theoretical analysis. For the inelastic scattering the rather extensive data strongly supports the coupled channels models with collective formfactors. At the most back angles, at intensities about 10 -5 of Rutherford scattering, a second, compound-like mechanism becomes dominant. The description of the interplay of these two opposite mechanisms provides a new challenge for our understanding

  1. Family-centred care delivery

    Science.gov (United States)

    Mayo-Bruinsma, Liesha; Hogg, William; Taljaard, Monica; Dahrouge, Simone

    2013-01-01

    Abstract Objective To determine whether models of primary care service delivery differ in their provision of family-centred care (FCC) and to identify practice characteristics associated with FCC. Design Cross-sectional study. Setting Primary care practices in Ontario (ie, 35 salaried community health centres, 35 fee-for-service practices, 32 capitation-based health service organizations, and 35 blended remuneration family health networks) that belong to 4 models of primary care service delivery. Participants A total of 137 practices, 363 providers, and 5144 patients. Main outcome measures Measures of FCC in patient and provider surveys were based on the Primary Care Assessment Tool. Statistical analyses were conducted using linear mixed regression models and generalized estimating equations. Results Patient-reported FCC scores were high and did not vary significantly by primary care model. Larger panel size in a practice was associated with lower odds of patients reporting FCC. Provider-reported FCC scores were significantly higher in community health centres than in family health networks (P = .035). A larger number of nurse practitioners and clinical services on-site were both associated with higher FCC scores, while scores decreased as the number of family physicians in a practice increased and if practices were more rural. Conclusion Based on provider and patient reports, primary care reform strategies that encourage larger practices and more patients per family physician might compromise the provision of FCC, while strategies that encourage multidisciplinary practices and a range of services might increase FCC. PMID:24235195

  2. Preparation of a liquid nitrogen target for measurement of γ-ray in the 14N(n,γ)15N reaction as an intensity standard in energy region up to 11 MeV

    International Nuclear Information System (INIS)

    Hirano, M.; Obayashi, H.; Sakane, H.; Shibata, M.; Kawade, K.; Taniguchi, A.

    2001-01-01

    For determination of relative γ-ray intensities up to 11 MeV in the 14 N(n,γ) 15 N reaction, we have developed a liquid nitrogen (N 2 ) target which contain no hydrogen (H) to improve the accuracy of γ-ray intensities. The ratio of the relative uncertainties for the liquid nitrogen to that for the melamine (C 3 H 6 N 6 ) widely used was improved by a factor of 2 above 2.2 MeV and a factor of 3 - 6 below 2.2 MeV. It has been shown that the liquid nitrogen target is useful for reduction of the 2.2 MeV γ-ray from the 1 H(n,γ) 2 H reaction and improvement of statistics. (author)

  3. Selected ion flow tube, SIFT, studies of the reactions of H3O+, NO+ and O2 + with some biologically active isobaric compounds in preparation for SIFT-MS analyses

    Czech Academy of Sciences Publication Activity Database

    Smith, D.; Chippendale, T. W. E.; Španěl, Patrik

    2011-01-01

    Roč. 303, 2-3 (2011), s. 81-89 ISSN 1387-3806 R&D Projects: GA ČR GA202/09/0800; GA ČR GA203/09/0256 Institutional research plan: CEZ:AV0Z40400503 Keywords : SIFT-MS * ion-molecule reactions * proton transfers Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.549, year: 2011

  4. N-methyl-3-pyrrolidines preparation by means of [3+2] dipoles cycloaddition reactions; Preparacion de N-metil-3-arilpirrolidinas mediante reacciones de cicloadicion dipolares [3+2

    Energy Technology Data Exchange (ETDEWEB)

    Negron, Guillermo [Universidad Autonoma Metropolitana-Azcapotzalco, Mexico, D.F. (Mexico); Fuentes, Aydee; Romero, Moises [Universidad Autonoma del Estado de Mexico, Toluca, Estado de Mexico (Mexico); Madrid, Gustavo; Cruz, Raymundo [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    1999-08-01

    The [3+2] cycloaddition reaction between azomethine ylide generated by deprotonation of trimethylamine N-oxide with LDA and various {alpha}-asarone derivatives to afford the corresponding pyrrolidines is described. [Spanish] Las reacciones de cicloadicion [3+2] entre iluros de azometino generados por accion del LDA sobre el N-oxido de trimetilamina y varios derivados de la {alpha}-asarona, permite la obtencion de las pirrolidinas correspondientes.

  5. Infrared Spectra and Structures of SiH{sub 2}-(CH{sub 2}){sub 2} and CH{sub 2}=CH-SiH{sub 3} Intermediates Prepared in Reactions of Laser-ablated Silicon Atoms with Ethane

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Han-Gook [Incheon National University, Incheon (Korea, Republic of); Andrews, Lester [University of Virginia, Charlottesville (United States)

    2016-03-15

    SiH{sub 2}-(CH{sub 2}){sub 2} and CH{sub 2}=CH-SiH{sub 3} were observed in the matrix IR spectra following reactions of laser-ablated Si atoms with ethane on the basis of correlation with computed frequencies. Evidently photon energy is required for the formation of the cyclic Si compound. These Si complexes are similar to the primary products in the previous studies of group 4 metals, in line with the previous results that s{sup 2}p{sup 2} and s{sup 2}d{sup 2} electronic configurations yield similar products. The relatively long C–C bond in the cyclic Si product reflects the structural strain, and the short C-Si and C-C bonds of CH{sub 3}CH=SiH{sub 2} and CH{sub 2}=CH-SiH{sub 3} show that they are true double bonds in line with the natural bond orders. Reactions of transition-metal atoms with small alkanes and halomethanes have been studied in a series of recent investigations. High oxidation-state products (methylidenes and methylidynes) along with insertion complexes were identified in the matrix spectra. It is interesting whether or not Si, a group 14 metalloid, undergoes similar reactions with larger hydrocarbons to provide higher oxidation-state compounds.

  6. Nuclear reactions

    International Nuclear Information System (INIS)

    Corner, J.; Richardson, K.; Fenton, N.

    1990-01-01

    Nuclear reactions' marks a new development in the study of television as an agency of public policy debate. During the Eighties, nuclear energy became a major international issue. The disasters at Three-mile Island and Chernobyl created a global anxiety about its risks and a new sensitivity to it among politicians and journalists. This book is a case-study into documentary depictions of nuclear energy in television and video programmes and into the interpretations and responses of viewers drawn from many different occupational groupings. How are the complex and specialist arguments about benefit, risk and proof conveyed through the different conventions of commentary, interview and film sequence? What symbolic associations does the visual language of television bring to portrayals of the issue? And how do viewers make sense of various and conflicting accounts, connecting what they see and hear on the screen with their pre-existing knowledge, experience and 'civic' expectations. The authors examine some of the contrasting forms and themes which have been used by programme makers to explain and persuade, and then give a sustained analysis of the nature and sources of viewers' own accounts. 'Nuclear Reactions' inquires into the public meanings surrounding energy and the environment, spelling out in its conclusion some of the implications for future media treatments of this issue. It is also a key contribution to the international literature on 'television knowledge' and the processes of active viewing. (author)

  7. The Aube storage centre: Annual report 2010

    International Nuclear Information System (INIS)

    2011-01-01

    After a presentation of the Aube storage centre, a storage centre for low and intermediate activity nuclear wastes, this report gives an overview of measures related to nuclear security, to radioprotection and to nuclear safety. It indicates the incidents and accidents which occurred in 2010, describes how the centre's wastes are managed, and indicates the actions performed in terms of public information

  8. Colorimetric Determination of the Iron(III)-Thiocyanate Reaction Equilibrium Constant with Calibration and Equilibrium Solutions Prepared in a Cuvette by Sequential Additions of One Reagent to the Other

    Science.gov (United States)

    Nyasulu, Frazier; Barlag, Rebecca

    2011-01-01

    The well-known colorimetric determination of the equilibrium constant of the iron(III-thiocyanate complex is simplified by preparing solutions in a cuvette. For the calibration plot, 0.10 mL increments of 0.00100 M KSCN are added to 4.00 mL of 0.200 M Fe(NO[subscript 3])[subscript 3], and for the equilibrium solutions, 0.50 mL increments of…

  9. The industrial centre of gathering, warehousing and storage

    International Nuclear Information System (INIS)

    2014-06-01

    This publication proposes an overview of the Cires (industrial centre for the gathering, warehousing and storage), a storage centre classified for the protection of the environment and operated by the ANDRA for the storage of very-low-level wastes. The activities and missions of this centre are briefly indicated, as well as some key figures (storage and warehousing surfaces), a definition of radioactive wastes and an indication of their origins (electronuclear, research, defence, industry, or medicine), an indication of the different categories of wastes with respect to their activity level and lifetime. It briefly describes the technical solution adopted for the storage of these very-low-level wastes, and comments their origins, indicates their average radioactivity level, and their quantity in France. The choice for storage is briefly explained. The pathway followed by a waste is briefly described: production, parcel preparation, parcel delivery at the Cires, controls performed at their arrival, processing and re-packaging of some parcels before storage. The gathering and warehousing functions of the centre for non electronuclear wastes are presented: functions of the specific buildings, concerned wastes. The path followed by these non electronuclear wastes is described with respect with the different types of wastes: sorting, gathering, processing, warehousing, storage. Actions related to the control of the environment and to the control of the storage area after closure are indicated

  10. The DIY Digital Medical Centre.

    Science.gov (United States)

    Timmis, James Kenneth; Timmis, Kenneth

    2017-09-01

    Healthcare systems worldwide are confronted with major economic, organizational and logistical challenges. Historic evolution of health care has led to significant healthcare sector fragmentation, resulting in systemic inefficiencies and suboptimal resource exploitation. To attain a sustainable healthcare model, fundamental, system-wide improvements that effectively network, and ensure fulfilment of potential synergies between sectors, and include and facilitate coherent strategic planning and organisation of healthcare infrastructure are needed. Critically, they must be specifically designed to sustainably achieve peak performance within the current policy environment for cost-control, and efficiency and quality improvement for service delivery. We propose creation of a new healthcare cluster, to be embedded in existing healthcare systems. It consists of (i) local 24/7 walk-in virtually autonomous do-it-yourself Digital Medical Centres performing routine diagnosis, monitoring, prevention, treatment and standardized documentation and health outcome assessment/reporting, which are online interfaced with (ii) regional 24/7 eClinician Centres providing on-demand clinical supervision/assistance to Digital Medical Centre patients. Both of these are, in turn, online interfaced with (iii) the National Clinical Informatics Centre, which houses the national patient data centre (cloud) and data analysis units that conduct patient- and population-level, personalized and predictive(-medicine) intervention optimization analyses. The National Clinical Informatics Centre also interfaces with biomedical research and prioritizes and accelerates the translation of new discoveries into clinical practice. The associated Health Policy Innovation and Evaluation Centre rapidly integrates new findings with health policy/regulatory discussions. This new cluster would synergistically link all health system components in a circular format, enable not only access by all arms of the health

  11. Relational nuclear databases upon the MSU INP CDFE Web-site and Nuclear Data Centres Network CDFE activities. P7[Centre for Photonuclear Experiments Data, Moscow, Russian Federation

    Energy Technology Data Exchange (ETDEWEB)

    Boboshin, I N; Varlamov, V V; Ivanov, E M; Ivanov, S V; Peskov, N N; Stepanov, M E; Chesnokov, V V [Centre for Photonuclear Experiments Data, Moscow (Russian Federation)

    2001-07-01

    This report contains only the short review of the work carried out by the CDFE concerning the IAEA Nuclear Reaction Data Centres Network activities for the period of time from the IAEA Advisory Group Meeting (15-19 May 2000, Obninsk, Russia) till May 2001 and the description of the main results obtained.

  12. Sample preparation

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Sample preparation prior to HPLC analysis is certainly one of the most important steps to consider in trace or ultratrace analysis. For many years scientists have tried to simplify the sample preparation process. It is rarely possible to inject a neat liquid sample or a sample where preparation may not be any more complex than dissolution of the sample in a given solvent. The last process alone can remove insoluble materials, which is especially helpful with the samples in complex matrices if other interactions do not affect extraction. Here, it is very likely a large number of components will not dissolve and are, therefore, eliminated by a simple filtration process. In most cases, the process of sample preparation is not as simple as dissolution of the component interest. At times, enrichment is necessary, that is, the component of interest is present in very large volume or mass of material. It needs to be concentrated in some manner so a small volume of the concentrated or enriched sample can be injected into HPLC. 88 refs

  13. Spallation reactions; Reactions de spallation

    Energy Technology Data Exchange (ETDEWEB)

    Cugon, J.

    1996-12-31

    Spallation reactions dominate the interactions of hadrons with nuclei in the GeV range (from {approx} 0.1 to {approx} 10 GeV). They correspond to a sometimes important ejection of light particles leaving most of the time a residue of mass commensurate with the target mass. The main features of the experimental data are briefly reviewed. The most successful theoretical model, namely the intranuclear cascade + evaporation model, is presented. Its physical content, results and possible improvements are critically discussed. Alternative approaches are shortly reviewed. (author). 84 refs.

  14. PREPARATION AND CHARACTERIZATION OF DIALDEHYDE ...

    African Journals Online (AJOL)

    User

    Dialdehyde starch urea (DASU) was prepared by the reaction of dialdehyde starch (DAS) from ... is representative one for the treatment of heavy metal ... It was reported that Potassium ... 0.2mol/L sulfuric acid, 100cm3 of water and 2cm3 of.

  15. Preparation and characterization of three 7Be targets for the measurement of the 7Be(n, p)7Li and 7Be(n, α)7Li reaction cross sections

    Science.gov (United States)

    Maugeri, E. A.; Heinitz, S.; Dressler, R.; Barbagallo, M.; Ulrich, J.; Schumann, D.; Colonna, N.; Köster, U.; Ayranov, M.; Vontobel, P.; Mastromarco, M.; Schell, J.; Correia, J. Martins; Stora, T.; n TOF Collaboration

    2018-05-01

    This manuscript describes the production of three targets obtained by implantation of different activities of 7Be into thin aluminium disks. Two of the produced targets were used to measure the 7Be(n, p)7Li cross section in the energy range of interest for the Big-Bang Nucleosynthesis. A third target was used to measure the cross sections of 7Be(n, p)7Li and 7Be(n, α)7Li nuclear reactions with cold and thermal neutrons, respectively. This paper describes also the characterization of the first two targets, performed after the neutron irradiation, in terms of implanted 7Be activities and spatial distributions.

  16. A macro perspective for client-centred practice in curricula: Critique and teaching methods.

    Science.gov (United States)

    Fleming-Castaldy, Rita P

    2015-07-01

    Client-centred practice is often eclipsed by social, economic, and political inequities. Ignoring these realities obstructs clients' goal attainment. The author advocates for the integration of a macro perspective inclusive of participation barriers and supports in occupational therapy curricula and seeks to motivate educators to adopt teaching approaches that develop students' abilities to address the complexities of client-centred practice. This article integrates a critical analysis of the literature on client-centred practice with reflexivity on disability studies and autoethnography. Educational standards require students to learn about the social, economic, and political contexts that impact on client-centred practice and the need for advocacy to enable participation. Theoretical support of a macro perspective for client-centred practice is strongly evident in the literature. Information on methods for teaching students how to actualize these concepts in practice is scant. Thus, strategies to inform the integration of a macro perspective into curricula and concrete activities to develop students' competencies for empowered client-centred practice are required. Educators have an ethical responsibility to critique their pedagogy to determine whether they are adequately preparing students for client-centred practice. The focus must move from teaching a micro perspective of client-centred practice to a macro perspective that enables occupational justice and empowerment.

  17. Discussion on 'Centres of excellence' in Africa

    International Nuclear Information System (INIS)

    Riad, S.

    1999-01-01

    In Africa, Centres of Excellence should be oriented to build up scientific and technological capacity in the four topics of international Monitoring System related technologies, namely, seismic monitoring, hydro acoustic monitoring, infrasound monitoring and radionuclides monitoring. Training programs on these topics should be a major objective. A network of such centres should be established in a number of African countries. Centres should be equipped with means and materials for on-line course dispatch to interested training centres or research institutions. African centres should develop strong relationship among themselves through information and data exchange and sharing, harmonization of training programs. National data centres may be established as a component of the African Centre of Excellence. States Signatories may authorize the establishment of a specific fund to support the activities of the African center

  18. Structural and morphological characterization of TiO{sub 2} powders prepared using Pechini and combustion reaction; Caracterizacao estrutural e morfologica de nanopos de TiO{sub 2} preparados pelo metodo Pechini e por reacao de combustao

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, P.C.; Almeida, E.P.; Costa, A.C.F.M. da; Lira, H.L., E-mail: pollyanacae@yahoo.com.b [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Dept. de Engenharia de Materiais; Kiminami, R.H.G.A. [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Dept. de Engenharia de Materiais

    2010-07-01

    TiO{sub 2} is a semiconductor oxide and polymorphic and can exist in three crystallographic forms: anatase, rutile and broquita, and forms anatase and rutile are the major interests in scientific research. Thus, this study aims to synthesize TiO{sub 2} by Pechini methods and combustion reaction and to evaluate the influence of synthesis methods in structural and morphological characteristics of the samples. The nanopowders were characterized by X-ray diffraction, nitrogen adsorption, and particle size distribution and scanning electron microscopy. The results of X-ray diffraction showed that the samples obtained by the Pechini method showed the single phase anatase with crystallite size of 20 nm and surface area of 49.44 m{sup 2}/g, whereas the samples synthesized by combustion reaction using glycine as fuel showed the rutile phase as major phase and traces of anatase phase, with crystallite size of 65 nm and surface area 4.34 m{sup 2}/g. (author)

  19. The emergence of urban centres

    DEFF Research Database (Denmark)

    Lazaro, Evelyn; Agergaard, Jytte; Larsen, Marianne Nylandsted

    by Tanzanian market liberalizations and its long term effects on private enterprise. The paper is based on a study of four EUCs in Tanzania (Ilula, Igowole, Madizini and Kibaigwa) and seeks to answer three research questions: 1) What economic and spatial trends, including national policies, have formed...... the pathway for rural transformation and early densification towards the emergence of urban centres in Tanzania? 2) What characterize the relationship between value chain dynamics and rural densification? 3) How do migration and investments contribute to the consolidation of EUCs as places of attraction...

  20. The LHC Physics Centre at CERN

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    Although raw physics data is produced at CERN, thanks to the GRID its analysis is performed in various institutes worldwide. In addition, workshops, conferences and meetings take place all over the world. The physicist community is decentralized, and CERN must continue to provide intellectual leadership. The LHC Physics Centre is the tool that will make this possible.   Until the early days of LEP, a large part of the scientific activity related to CERN’s experiments was strongly centered at the Laboratory. Few places had the infrastructure to host activities such as the working groups preparing the Yellow Reports, and the limited access to information in the pre-web era made CERN the natural place to learn what was happening in the field. “I remember the days when we, the theorists, would come to CERN just to read the most recent preprints, which were reaching CERN's Library before we could get them in our institutes”, says Michelangelo Mangano, a member of the Theo...

  1. Centre for nuclear engineering University of Toronto annual report 1984

    International Nuclear Information System (INIS)

    1984-12-01

    The annual report of the Centre for Nuclear Engineering, University of Toronto covers the following subjects: message from the Dean; Chairman's message; origins of the centre; formation of the centre; new nuclear appointments; and activities of the centre, 1984

  2. Chain reaction

    International Nuclear Information System (INIS)

    Balogh, Brian.

    1991-01-01

    Chain Reaction is a work of recent American political history. It seeks to explain how and why America came to depend so heavily on its experts after World War II, how those experts translated that authority into political clout, and why that authority and political discretion declined in the 1970s. The author's research into the internal memoranda of the Atomic Energy Commission substantiates his argument in historical detail. It was not the ravages of American anti-intellectualism, as so many scholars have argued, that brought the experts back down to earth. Rather, their decline can be traced to the very roots of their success after World War II. The need to over-state anticipated results in order to garner public support, incessant professional and bureaucratic specialization, and the sheer proliferation of expertise pushed arcane and insulated debates between experts into public forums at the same time that a broad cross section of political participants found it easier to gain access to their own expertise. These tendencies ultimately undermined the political influence of all experts. (author)

  3. The new AMS control centre

    CERN Multimedia

    Anaïs Schaeffer

    2011-01-01

    Construction work for the future AMS control room began in November 2010 and should be finished this June. The new building, which will have been completed in record time thanks to the professionalism of the project team, will soon be ready to receive the initial data from the AMS experiment.     Luigi Scibile and Michael Poehler, from the GS department, at the AMS control centre construction site.   The Alpha Magnetic Spectrometer (AMS) is due to wing its way towards the International Space Station (ISS) on board the shuttle Discovery in April. Mainly intended for research on antimatter and dark matter, the data collected by AMS will be sent to Houston in the United States and then directly to CERN’s new Building 946. Construction work for the AMS control centre building on the Route Gentner at CERN’s Prévessin site started in November 2010 and must be completed in time to receive the first data from the spectrometer in June. “It normall...

  4. Preparation of Ag@mSiO{sub 2} and Pt@mSiO{sub 2}nano composites using trioctylmethyl ammonium hydrogen phthalate (TOMAHP) ionic liquid as reaction medium

    Energy Technology Data Exchange (ETDEWEB)

    Biswas, Sujoy, E-mail: sujoyb@barc.gov.in [Chemical Engineering Group, Bhabha Atomic Research Centre, Mumbai 400085 (India); Dasgupta, Kinshuk [Materials Group, Bhabha Atomic Research Centre, Mumbai 400085 (India); Bahadur, Jitendra [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Tewari, Raghavendra [Materials Group, Bhabha Atomic Research Centre, Mumbai 400085 (India); Mazumder, Subhasish [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai 400085 (India)

    2016-09-15

    A novel one step green chemistry approach utilizing trioctylmethyl ammonium hydrogen phthalate (TOMAHP), task specific ionic liquid has been attempted for synthesis of Ag and Pt nanoparticles supported on silica (Ag@mSiO{sub 2} and Pt@mSiO{sub 2}). Structure, size distribution and morphology of these nano-composite particles were evaluated using X-ray diffraction (XRD), transmission electron microscopy (TEM), small angle neutron scattering (SANS) as well as small angle X-ray scattering (SAXS) techniques. The XRD results show that Ag/Pt metal nanoparticles deposited on to SiO{sub 2} surface are face center cubic (fcc) in nature. The TEM and SAXS/SANS results show the morphology and size distributions of Ag and Pt nanoparticles loaded on to the surface of SiO{sub 2}. It has been found that Ag nanoparticles are well dispersed on to the SiO{sub 2} surface and are quite monodisperse in size, whereas Pt nanoparticles are quite polydisperse in size and forms aggregate or chain like structure on SiO{sub 2} surface containing primary nanoparticles of typical size range 3–7 nm. The stability of nanoparticles, which controls its dispersion on SiO{sub 2} substrate, has been discussed. - Graphical abstract: Mechanism for Ag@mSiO{sub 2} and Pt@mSiO{sub 2} nano composites in TOMAHP ionic liquid medium. - Highlights: • Novel methods for preparation of Pt@SiO{sub 2} and Ag@SiO{sub 2} nano composite in functionalized ionic liquid. • Pt@SiO{sub 2} and Ag@SiO{sub 2} nano composite are characterized using XRD, TEM as well as small angle x-ray scattering techniques. • The sizes of nano composite is <10 nm in size. • The method is simple one step, green chemical reduction method to prepare SiO{sub 2} support nano catalyst.

  5. Radioprotective preparation

    International Nuclear Information System (INIS)

    Stefanova, D.; Frattadochi, A.; Gattavecchia, E.; Ferri, E.; Tonnelli, D.

    1988-01-01

    The invention is intended for radiation injuries prophylaxis in mammals. It has an well expressed radioprotective effect against acute gamma irradiation on cellular level as well as a prolonged action when applied up to 48 hours before the acute irradiation. The preparation is a coprecipitate of the natural tripeptide glutathione (reduced form) and polyvinyl pyrrolidone (pvp) in ratio 30-60/70-40. It is obtained by incubation method with subsequent lyophilization from water solution of the initial components. The molecular mass of the pvp is 20 till 360.10 3 . 2 claims

  6. Target preparation

    International Nuclear Information System (INIS)

    Hinn, G.M.

    1984-01-01

    A few of the more interesting of the 210 targets prepared in the Laboratory last year are listed. In addition the author continues to use powdered silver mixed with /sup 9,10/BeO to produce sources for accelerator radio dating of Alaskan and South Polar snow. Currently, he is trying to increase production by multiple sample processing. Also the author routinely makes 3 μg/cm 2 cracked slacked carbon stripper foils and is continuing research with some degree of success in making enriched 28 Si targets starting with the oxide

  7. Methods for preparation of deuterated amino acids

    International Nuclear Information System (INIS)

    Pshenichnikova, A.B.; Karnaukhova, E.N.; Zvonkova, E.N.

    1995-01-01

    The current state and prospects for the use of amino acids labeled with stable isotopes are considered. Methods for the preparation of deuterated amino acids, including synthetic, chemicoenzymatic, and biosynthetic ones, and deuterium exchange reactions are summarized. Problems in the preparation of optically pure amino acids are discussed. 120 refs., 15 figs

  8. A disposal centre for irradiated nuclear fuel: conceptual design study

    International Nuclear Information System (INIS)

    1980-09-01

    This report describes a conceptual design of a disposal centre for irradiated nuclear fuel. The surface facilities consist of plants for the preparation of steel cylinders containing irradiated nuclear fuel immobilized in lead, shaft headframe buildings, and all necessary support facilities. The undergound disposal vault is located on one level at a depth of 1000 metres. The cylinders containing the irradiated fuel are emplaced on a one-metre thick layer of backfill material and then completely covered with backfill. All surface and subsurface facilities are described, operations and schedules are summarized, and cost estimates and manpower requirements are given. (auth)

  9. Building trust with the schoolchildren in the nuclear training centre

    International Nuclear Information System (INIS)

    Stritar, Andrej; Istenie, Radko

    1995-01-01

    Although Krsko Nuclear Power Plant has been in operation for more than ten years, comparatively little has been done in the field of systematic education and public information. Deficiencies in this field are causing serious misunderstandings about the role of nuclear power and is having a negative impact on its public acceptance. At The Nuclear Training Centre Milan Copic (NTC) in Ljubljana we have prepared a presentation on nuclear energy encompassing a short description of a PWR nuclear power plant, importance of nuclear power in the world and in Slovenia, basic ideas of nuclear safety and radioactive waste disposal

  10. The dehydration of SrTeO3(H2O)--a topotactic reaction for preparation of the new metastable strontium oxotellurate(IV) phase ε-SrTeO3.

    Science.gov (United States)

    Stöger, Berthold; Weil, Matthias; Baran, Enrique J; González-Baró, Ana C; Malo, Sylvie; Rueff, Jean Michel; Petit, Sebastien; Lepetit, Marie Bernadette; Raveau, Bernard; Barrier, Nicolas

    2011-05-28

    Microcrystalline single-phase strontium oxotellurate(IV) monohydrate, SrTeO(3)(H(2)O), was obtained by microwave-assisted hydrothermal synthesis under alkaline conditions at 180 °C for 30 min. A temperature of 220 °C and longer reaction times led to single crystal growth of this material. The crystal structure of SrTeO(3)(H(2)O) was determined from single crystal X-ray diffraction data: P2(1)/c, Z = 4, a = 7.7669(5), b = 7.1739(4), c = 8.3311(5) Å, β = 107.210(1)°, V = 443.42(5) Å(3), 1403 structure factors, 63 parameters, R[F(2)>2σ(F(2))] = 0.0208, wR(F(2) all) = 0.0516, S = 1.031. SrTeO(3)(H(2)O) is isotypic with the homologous BaTeO(3)(H(2)O) and is characterised by a layered assembly parallel to (100) of edge-sharing [SrO(6)(H(2)O)] polyhedra capped on each side of the layer by trigonal-prismatic [TeO(3)] units. The cohesion of the structure is accomplished by moderate O-H···O hydrogen bonding interactions between donor water molecules and acceptor O atoms of adjacent layers. In a topochemical reaction, SrTeO(3)(H(2)O) condensates above 150 °C to the metastable phase ε-SrTeO(3) and transforms upon further heating to δ-SrTeO(3). The crystal structure of ε-SrTeO(3), the fifth known polymorph of this composition, was determined from combined electron microscopy and laboratory X-ray powder diffraction studies: P2(1)/c, Z = 4, a = 6.7759(1), b = 7.2188(1), c = 8.6773(2) Å, β = 126.4980(7)°, V = 341.20(18) Å(3), R(Fobs) = 0.0166, R(Bobs) = 0.0318, Rwp = 0.0733, Goof = 1.38. The structure of ε-SrTeO(3) shows the same basic set-up as SrTeO(3)(H(2)O), but the layered arrangement of the hydrous phase transforms into a framework structure after elimination of water. The structural studies of SrTeO(3)(H(2)O) and ε-SrTeO(3) are complemented by thermal analysis and vibrational spectroscopic measurements.

  11. Centre for Building Simulation. Basis for establishing a centre; Center for Bygningssimulering - Idegrundlag for etablering af center

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, Joergen Erik; Karlshoej, J.; Bacher, P.; Johnsen, K.; Olesen, B.W.; Rode, C.; Heller, A.

    2012-12-15

    The purpose of the project was to create the basis for the establishment of a Centre for Building Simulation focusing on the use of advanced building energy simulations to obtain electricity and heat savings. The project of trying to make a Centre for Building Simulation in Denmark was based on interviews with future users and partners with an interest in further development of Denmark's leading position in this field. Friday 29th October, 2010, a ''Workshop on the establishment of the Centre for Building Simulation'' was organized at DTU. Approximately 90 national and international participants were present. The workshop structure and results are described in enclosure 1. The primary purpose of the workshop was to establish consensus on the needs of architects and consultants in Denmark in relation to building simulation, and create the concept for a Danish Centre for Building Simulation. As a result of the workshop the idea grew that the centre will combine research and development activities of the Danish building simulation and develops future intelligent simulation tools with a focus on the use of advanced building energy simulations to achieve sustainable construction. These programs need to interact closely with Building Information Modelling, BIM, where the construction process is connected to a digital building model. In addition, various financing options were considered for the operation of the centre with an initial time horizon of 5-10 years. Based on results from the workshop, interviews with future users and partners, a large application was written to the Danish National Research Council, 7th application round - Centre of Excellence, 29 November 2011 (enclosure 3) entitled ''Centre for Intelligent Building Information Modelling iBIM''. The work on the application resulted in a great deal of knowledge gathered and adapted during the whole process of preparing the application. Unfortunately, the application

  12. Making the most of person-centred education by integrating flipped and simulated teaching: An exploratory study.

    Science.gov (United States)

    Saunders, Annette; Green, Rosy; Cross, Merylin

    2017-11-01

    Preparing a person-centred nursing workforce to work in diverse settings is a global health priority. Nursing students' first placement experience is a key transitional moment that shapes professional understanding and motivation to become a nurse. This paper reports the outcomes of combining flipped and simulated learning to enhance nursing students' understanding of person-centred care, the professional nursing role and preparation for placement. The study design was exploratory, the setting, an undergraduate nursing program in an Australian University. Participants included first year nursing students, academic tutors and clinical facilitators. Data collected via survey, semistructured interviews and focus group discussion were analysed descriptively and thematically. Over 90% of students surveyed considered the unit structure, content and resources prepared them well for placement. Pre-class preparation and simulated tutorial activities facilitated student engagement and knowledge translation. Students, tutors and clinical facilitators valued the person-centred approach. Tutors considered the unit materials and focus enhanced students' professional understanding. Clinical facilitators deemed students well-prepared for placement. These results from multiple perspectives, though limited, support combining the flipped classroom and person-centred simulation in nursing education as a strategy to prepare students for clinical placement, translate person-centred values into practice and promote professional understanding and role socialisation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Smart work centres in rural areas

    DEFF Research Database (Denmark)

    Lorentzen, Anne Birte

    This paper discusses the establishment of telework centres as an element in local development strategies in rural areas, with a particular view to two new telework centres in region North Denmark. The paper argues that telework centres do not represent an easy solution to problems of local...... development and environmental sustainability, and further, that technology may not even be the most important feature needed to make them function as such....

  14. Elm Farm Organic Research Centre December 2006

    OpenAIRE

    Sanders, Richard; Whiltley, Andrew; Haigh, Zoe; Clarke, Sarah; Hitchings, Roger; O'Brien, Josie

    2006-01-01

    The Organic Research Centre. Elm Farm Research Centre Bulletin with Technical Updates from The Organic Advisory Service is a regular publication from The Organic Research Centre. The current issue covers: Report from 2006 Cirencester Conference; Quest for more home produced organic food; in a world where bread matters; Improving wheat with plenty of parents; Unlocking the secrets of the ancient (cereal varieties); Brain food- a good read; Not to late to protect the future: The organic...

  15. Powering the Future Data Centre

    DEFF Research Database (Denmark)

    Zhang, Zhe

    2010-01-01

    of the characteristics of these two power sources: long warm-up stage and low dynamics for fuel cell, and variable terminal voltage for supercapacitors. The motivation for this project was to find ways which can overcome those limitations to integrate fuel cells and supercapcitors to the system with high efficiency......The extended run Uninterruptible Power Supply system (UPSs) which powered by fuel cells and supercapcitors, is a promising solution for future data centre to obtain environmentfriendly energy efficient and cost effective. There are many challenges in power electronic interface circuits, because......: • Optimized design method for dual active bridge (DAB) converter and its derived circuits; • A novel hybrid dc-dc converter and its corresponding optimal design method are proposed; • An improved dual input current-fed DC-DC converter with bidirectional power conversion ability is investigated; • Extend...

  16. Effect of annealing temperatures on the electrical conductivity and dielectric properties of Ni1.5Fe1.5O4 spinel ferrite prepared by chemical reaction at different pH values

    Science.gov (United States)

    Aneesh Kumar, K. S.; Bhowmik, R. N.

    2017-12-01

    The electrical conductivity and dielectric properties of Ni1.5Fe1.5O4 ferrite has been controlled by varying the annealing temperature of the chemical routed samples. The frequency activated conductivity obeyed Jonscher’s power law and universal scaling suggested semiconductor nature. An unusual metal like state has been revealed in the measurement temperature scale in between two semiconductor states with different activation energy. The metal like state has been affected by thermal annealing of the material. The analysis of electrical impedance and modulus spectra has confirmed non-Debye dielectric relaxation with contributions from grains and grain boundaries. The dielectric relaxation process is thermally activated in terms of measurement temperature and annealing temperature of the samples. The hole hopping process, due to presence of Ni3+ ions in the present Ni rich ferrite, played a significant role in determining the thermal activated conduction mechanism. This work has successfully applied the technique of a combined variation of annealing temperature and pH value during chemical reaction for tuning electrical parameters in a wide range; for example dc limit of conductivity ~10-4-10-12 S cm-1, and unusually high activation energy ~0.17-1.36 eV.

  17. Preparation of Ag4Bi2O5/MnO2 Corn/Cob Like Nano Material as a Superior Catalyst for Oxygen Reduction Reaction in Alkaline Solution

    Directory of Open Access Journals (Sweden)

    Xun Zeng

    2017-12-01

    Full Text Available Ag4Bi2O5/MnO2 nano-sized material was synthesized by a co-precipitation method in concentrated KOH solution. The morphology characterization indicates that MnO2 nanoparticles with a size of 20 nm are precipitated on the surface of nano Ag4Bi2O5, forming a structure like corn on the cob. The obtained material with 60% Mn offers slightly higher initial potential (0.098 V vs. Hg/HgO and limiting current density (−5.67 mA cm−2 at a rotating speed of 1600 rpm compared to commercial Pt/C (−0.047 V and −5.35 mA cm−2, respectively. Furthermore, the obtained material exhibits superior long-term durability and stronger methanol tolerance than commercial Pt/C. The remarkable features suggest that the Ag4Bi2O5/MnO2 nano-material is a very promising oxygen reduction reaction catalyst.

  18. Chemical kinetics and reaction mechanism

    International Nuclear Information System (INIS)

    Jung, Ou Sik; Park, Youn Yeol

    1996-12-01

    This book is about chemical kinetics and reaction mechanism. It consists of eleven chapters, which deal with reaction and reaction speed on reaction mechanism, simple reaction by rate expression, reversible reaction and simultaneous reaction, successive reaction, complicated reaction mechanism, assumption for reaction mechanism, transition state theory, successive reaction and oscillating reaction, reaction by solution, research method high except kinetics on reaction mechanism, high reaction of kinetics like pulsed radiolysis.

  19. Hypersensitivity reactions in patients receiving hemodialysis.

    Science.gov (United States)

    Butani, Lavjay; Calogiuri, Gianfranco

    2017-06-01

    To describe hypersensitivity reactions in patients receiving maintenance hemodialysis. PubMed search of articles published during the past 30 years with an emphasis on publications in the past decade. Case reports and review articles describing hypersensitivity reactions in the context of hemodialysis. Pharmacologic agents are the most common identifiable cause of hypersensitivity reactions in patients receiving hemodialysis. These include iron, erythropoietin, and heparin, which can cause anaphylactic or pseudoallergic reactions, and topical antibiotics and anesthetics, which lead to delayed-type hypersensitivity reactions. Many hypersensitivity reactions are triggered by complement activation and increased bradykinin resulting from contact system activation, especially in the context of angiotensin-converting enzyme inhibitor use. Several alternative pharmacologic preparations and dialyzer membranes are available, such that once an etiology for the reaction is established, recurrences can be prevented without affecting the quality of care provided to patients. Although hypersensitivity reactions are uncommon in patients receiving hemodialysis, they can be life-threatening. Moreover, considering the large prevalence of the end-stage renal disease population, the implications of such reactions are enormous. Most reactions are pseudoallergic and not mediated by immunoglobulin E. The multiplicity of potential exposures and the complexity of the environment to which patients on dialysis are exposed make it challenging to identify the precise cause of these reactions. Great diligence is needed to investigate hypersensitivity reactions to avoid recurrence in this high-risk population. Copyright © 2017 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

  20. Large-scale fuel cycle centres

    International Nuclear Information System (INIS)

    Smiley, S.H.; Black, K.M.

    1977-01-01

    The US Nuclear Regulatory Commission (NRC) has considered the nuclear energy centre concept for fuel cycle plants in the Nuclear Energy Centre Site Survey 1975 (NECSS-75) Rep. No. NUREG-0001, an important study mandated by the US Congress in the Energy Reorganization Act of 1974 which created the NRC. For this study, the NRC defined fuel cycle centres as consisting of fuel reprocessing and mixed-oxide fuel fabrication plants, and optional high-level waste and transuranic waste management facilities. A range of fuel cycle centre sizes corresponded to the fuel throughput of power plants with a total capacity of 50,000-300,000MW(e). The types of fuel cycle facilities located at the fuel cycle centre permit the assessment of the role of fuel cycle centres in enhancing the safeguard of strategic special nuclear materials - plutonium and mixed oxides. Siting fuel cycle centres presents a smaller problem than siting reactors. A single reprocessing plant of the scale projected for use in the USA (1500-2000t/a) can reprocess fuel from reactors producing 50,000-65,000MW(e). Only two or three fuel cycle centres of the upper limit size considered in the NECSS-75 would be required in the USA by the year 2000. The NECSS-75 fuel cycle centre evaluation showed that large-scale fuel cycle centres present no real technical siting difficulties from a radiological effluent and safety standpoint. Some construction economies may be achievable with fuel cycle centres, which offer opportunities to improve waste-management systems. Combined centres consisting of reactors and fuel reprocessing and mixed-oxide fuel fabrication plants were also studied in the NECSS. Such centres can eliminate shipment not only of Pu but also mixed-oxide fuel. Increased fuel cycle costs result from implementation of combined centres unless the fuel reprocessing plants are commercial-sized. Development of Pu-burning reactors could reduce any economic penalties of combined centres. The need for effective fissile

  1. Effect of the heating rate on the microstructure of in situ Al2O3 particle-reinforced Al matrix composites prepared via displacement reactions in an Al/CuO system

    International Nuclear Information System (INIS)

    Zhao, Ge; Shi, Zhiming; Ta, Na; Ji, Guojun; Zhang, Ruiying

    2015-01-01

    Highlights: • The heating rate has a significant effect on the microstructures of composites. • The microstructure is determined by the diffusion rate of O and Cu in the heating stage. • The diffusion of Cu and O atoms is influenced by the heating rate. • With increasing heating rate, the Al 2 O 3 particle distribution becomes more uniformly. • With increasing heating rate, the form of Al 2 Cu changes from network to block-like. - Abstract: In this study, an in situ Al 2 O 3 particle-reinforced Al(Cu) matrix composite was successfully synthesized using a displacement reaction between Al and CuO powders. The powders were mixed at a weight ratio of 4:1 Al to CuO, cold-pressed and holding time at 900 °C for 1 h using varying heating rates. The effects of the heating rate on the microstructures of the composites were investigated using differential scanning calorimetry (DSC), X-ray diffraction (XRD), optical microscopy (MO), scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). The results indicate that all of the composites contain Al, Al 2 O 3 particles and Al 2 Cu phases. Although the heating rate does not significantly affect the phase compositions of the composites, it has a significant effect on their microstructures, most likely because it strongly influences the diffusion rates of the Cu and O atoms. As the heating rate is increased, the Al 2 O 3 particles become more dispersed, and they have a more uniform particle size distribution. Meanwhile, the Al 2 Cu structure transforms from the network (Al + Al 2 Cu) eutectic to the block-like Al 2 Cu phase. The ∼2 μm Al 2 O 3 particles and the block-like Al 2 Cu phase are distributed uniformly in the Al matrix when the sample is placed directly into a 900 °C furnace. This sample has a relative higher Rockwell hardness B (HRB) value of 87

  2. Methods for preparing synthetic freshwaters.

    Science.gov (United States)

    Smith, E J; Davison, W; Hamilton-Taylor, J

    2002-03-01

    Synthetic solutions that emulate the major ion compositions of natural waters are useful in experiments aimed at understanding biogeochemical processes. Standard recipes exist for preparing synthetic analogues of seawater, with its relatively constant composition, but, due to the diversity of freshwaters, a range of compositions and recipes is required. Generic protocols are developed for preparing synthetic freshwaters of any desired composition. The major problems encountered in preparing hard and soft waters include dissolving sparingly soluble calcium carbonate, ensuring that the ionic components of each concentrated stock solution cannot form an insoluble salt and dealing with the supersaturation of calcium carbonate in many hard waters. For acidic waters the poor solubility of aluminium salts requires attention. These problems are overcome by preparing concentrated stock solutions according to carefully designed reaction paths that were tested using a combination of experiment and equilibrium modeling. These stock solutions must then be added in a prescribed order to prepare a final solution that is brought into equilibrium with the atmosphere. The example calculations for preparing hard, soft and acidic freshwater surrogates with major ion compositions the same as published analyses, are presented in a generalized fashion that should allow preparation of any synthetic freshwater according to its known analysis.

  3. EVALUATION OF ENVIRONMENTAL EDUCATION CENTRES- A ...

    African Journals Online (AJOL)

    centres in South Africa revealed that some field .... psychomotor goals suitable for each age group? * Did the officer have a proper ..... education centres, spending two to four weeks at a ... you must be willing to suspend judgement, to hold in ...

  4. Australian International Food Security Research Centre | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Australian International Food Security Research Centre. Australian International Food Security Research Centre. http://aciar.gov.au/AIFSC. Cultivate Africa's Future. The Cultivate Africa's Future research partnership is designed to support applied research to combat hunger in sub-Saharan Africa by harnessing the potential ...

  5. Communications strategy for the Chernobyl Centre

    International Nuclear Information System (INIS)

    Kurilchik, Mykola; Green, Len

    2000-01-01

    This Communications Strategy was developed for the International Chernobyl Centre (ICC) as part of a joint UK/Ukraine project, sponsored by the Department of Trade and Industry and NNC Limited. The Plan was developed during four weeks of workshop discussions in the UK between staff from the centre and experienced PR Professionals from NNC Limited. The requirements for a sustained communications activity at the ICC go much further than simply enhancing or promoting the Centre's scientific and technical activities. Raising sufficient awareness of the Centre among potential funding agents and commercial partners is critical to its future development as a major centre for international co-operation and research. It is only through establishing and developing effective communications that the Centre will become well enough known and understood both within the Ukraine, and internationally, to secure its long term future. However, as the workshop programme unfolded, it also became clear that communications was in itself a legitimate and necessary function of the Centre, and part of the foundations of its existence. The Centre has a fundamental role as an 'information exchange', collecting and communicating information from within the Ukraine to the rest of the world, and interpreting world interest and attitudes to the Ukraine Government and nuclear industry. As such compliments the efforts of individual power plant and corporate PR functions within the Ukraine nuclear energy sector

  6. Vibrational-rotational excitation: chemical reactions of vibrationally excited molecules

    International Nuclear Information System (INIS)

    Moore, C.B.; Smith, I.W.M.

    1979-03-01

    This review considers a limited number of systems, particularly gas-phase processes. Excited states and their preparation, direct bimolecular reactions, reactions of highly excited molecules, and reactions in condensed phases are discussed. Laser-induced isotope separation applications are mentioned briefly. 109 references

  7. Emergency response technical centre of the IPSN

    International Nuclear Information System (INIS)

    Dallendre, R.

    2000-01-01

    The Institute for Nuclear Safety and Protection (IPSN), the technical support of the French nuclear safety authority, provides the technical support needed for protect the surrounding population from the consequences of radioactive releases. In the event of an accident arising at a nuclear facility, the IPSN would set up an Emergency Response Technical Centre (CTC) at Fontenay-aux-Roses. The IPSN's objectives are: (a) to diagnose the state of the nuclear facility and monitor its development, (b) to prepare prognosis for the evolution of the accident and to give an estimation of the associated consequences according to the situation evolution, (c) to estimate the risk of radioactive releases and the consequences on man and on the environment, mainly on the basis of weather forecasts and on the prognosis. This diagnosis-prognosis approach is build-up with the information on the state of the installation given by: the concerned site via audio-conference system and telescope, the security panels of the nuclear plant via networks. To perform its missions, the CTC, which has to be both safe and secure, uses multiple telecommunication resources to dialogue with partners and also mapping computer systems, data bases and software tools: (a) the SESAME system, which gives, during an accident of a PWR, a calculation method for the diagnosis-prognosis aforesaid, (b) the CONRAD system, which calculates the atmospheric dispersal of radioactive substances and consequences in the environment in the early phase of an accident, (c) the ASTRAL code, which allows to cope with long lasting situations. In order to be operational, the IPSN expert regularly undergo training in emergency situation management and participate in exercises organised by the government authorities. (author)

  8. Optimal control of the initiation of a pericyclic reaction in the ...

    Indian Academy of Sciences (India)

    Abstract. Pericyclic reactions in the electronic ground state may be initiated by down-chirped pump-dump ... Figure 1. Cope rearrangement of semibullvalene, with pincer-motion-type ... investigations which have centred attention on the simp-.

  9. Japan Nuclear Reaction Data Center (JCPRG), Faculty of Science, Hokkaido University, Steering Committee progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-11-15

    The Japan Nuclear Reaction Data Center (JCPRG) was approved as an organisation of Faculty of Science, Hokkaido University and established on April 1, 2007. In addition to nuclear data activities carried out by JCPRG (Japan-Charged Particle Nuclear Reaction Data Group), the centre is concerned with the evaluation of nuclear reaction data in nucleosynthesis in the universe. In order efficiently to compile reaction data obtained by using radioactive ion beam, the centre signed a research contract with RIKEN Nishina Center. We are scanning 16 journals for Japanese charged-particle and photo-nuclear nuclear reaction data compilation. From April 2006 to March 2007, CPND and PhND in 45 references (453 records, 1.83 MB) have been newly compiled for NRDF. Usually new data are released at the JCPRG web site several months prior to EXFOR. Since the 2006 NRDC meeting, we have made 104 new entries and have revised or deleted 142 old entries. Intensive numerical data compilations have been done. These data were shown in tabular form in dissertations which are (partially) published in Journals. About 30 new entries were compiled from these data. We have prepared CINDA batches for CPND published in Japan every half year. Each batch covers 6 issues of each of 4 Japanese journals JPJ, PTP, NST and JNRS. Bibliographies for neutron induced reaction data have been compiled by JAEA Nuclear Data Center as before. A new web-based NRDF search and plot system on MySQL was released in July, 2007. New compilation, which has been finalized for NRDF, but not for EXFOR, can be obtained from this site. DARPE (another NRDF search and plot system written in Perl) is also available at http://www.jcprg.org/darpe/. EXFOR/ENDF (http://www.jcprg.org/exfor/) search and plot system is available. We have also developed following utilities: PENDL (http://www.jcprg.org/endf/) and RENORM (http://www.jcprg.org/renorm). We are developing a new search system of CINDA. This is an extension of EXFOR/ENDF search

  10. Centre for urban ecotechnology in ``Oeksnehallen``

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Lord Mayor`s Department of the municipality of Copenhagen, Denmark, has with support from this project made a proposal for the establishment of the Centre for Urban Ecotechnology in ``Oeksnehallen``, located in the Vesterbro area of the city. The centre should contribute to the dissemination of knowledge on ecological techniques (regarding passive solar energy etc.) to the inhabitants of Vesterbro and other citizens of Copenhagen, and also serve as a centre in an European context. The ecological demonstration centre will cover an area of two thousand square meters and will also include a cafe, a room for showing coloured slides, facilities for exhibitions created by the center and interested firms etc. The centre should play an important role as part of the ecological concept of urban renewal in Vesterbro. (author).

  11. The role of the sexual assault centre.

    LENUS (Irish Health Repository)

    Eogan, Maeve

    2013-02-01

    Sexual Assault Centres provide multidisciplinary care for men and women who have experienced sexual crime. These centres enable provision of medical, forensic, psychological support and follow-up care, even if patients chose not to report the incident to the police service. Sexual Support Centres need to provide a ring-fenced, forensically clean environment. They need to be appropriately staffed and available 24 hours a day, 7 days a week to allow prompt provision of medical and supportive care and collection of forensic evidence. Sexual Assault Centres work best within the context of a core agreed model of care, which includes defined multi-agency guidelines and care pathways, close links with forensic science and police services, and designated and sustainable funding arrangements. Additionally, Sexual Assault Centres also participate in patient, staff and community education and risk reduction. Furthermore, they contribute to the development, evaluation and implementation of national strategies on domestic, sexual and gender-based violence.

  12. Laparoscopic adrenalectomy: Single centre experience.

    LENUS (Irish Health Repository)

    O'Farrell, N J

    2012-02-01

    BACKGROUND: Laparoscopic adrenalectomy is an attractive alternative to the traditional open approach in the surgical excision of an adrenal gland. It has replaced open adrenalectomy in our institution and we review our experience to date. METHODS: All cases of laparoscopic adrenalectomies in our hospital over eight years (from 2001 to May 2009) were retrospectively reviewed. Patient demographics, diagnosis, length of hospital stay, histology and all operative and post-operative details were evaluated. RESULTS: Fifty-five laparoscopic adrenalectomies (LA) were performed on 51 patients over eight years. The mean age was 48 years (Range 16-86 years) with the male: female ratio 1:2. Twenty-three cases had a right adrenalectomy, 24 had a left adrenalectomy and the remaining four patients had bilateral adrenalectomies. 91% were successfully completed laparoscopically with five converted to an open approach. Adenomas (functional and non functional) were the leading indication for LA, followed by phaeochromocytomas. Other indications for LA included Cushing\\'s disease, adrenal malignancies and rarer pathologies. There was one mortality from necrotising pancreatitis following a left adrenalectomy for severe Cushing\\'s disease, with subsequent death 10 days later. CONCLUSION: Laparoscopic adrenalectomy is effective for the treatment of adrenal tumours, fulfilling the criteria for the ideal minimally invasive procedure. It has replaced the traditional open approach in our centre and is a safe and effective alternative. However, in the case of severe Cushing\\'s disease, laparoscopic adrenalectomy has the potential for significant adverse outcomes and mortality.

  13. Birth centre confinement at the Queen Victoria Medical Centre. I. Obstetric and neonatal outcome.

    Science.gov (United States)

    Campbell, J; Hudson, H; Lumley, J; Morris, N; Rao, J; Spensley, J

    1981-10-03

    A review of hte first 175 confinements at the Queen Victoria Medical Centre Birth Centre is presented. The design, structure and function of hte Birth Centre is described and the safety of the programme demonstrated. Seventy-four pregnancies (42%) accepted for Birth Centre confinement required transfer because of antepartum or intrapartum complications. There were satisfactory obstetric and neonatal outcomes in all pregnancies. The first year's experience has allowed a reassessment of the risk factors, which will permit greater use of the Birth Centre without any increases risk to mothers or babies.

  14. No cases of perioperative allergy to local anaesthetics in the Danish Anaesthesia Allergy Centre

    DEFF Research Database (Denmark)

    Kvisselgaard, A D; Krøigaard, M; Mosbech, H F

    2017-01-01

    BACKGROUND: Local anaesthetics (LA) are often suspected as possible causes of allergic reactions. The Danish Anaesthesia Allergy Centre (DAAC) is the national reference centre for investigation of perioperative allergic reactions. The purpose of this study was to investigate the incidence of Ig......E-mediated immediate type perioperative allergic reactions to LA. METHODS: In the period 2004-2013, a total of 409 patients (244 women/165 men; median age 49 years, range 1-86 years) were investigated in DAAC on suspicion of allergy associated with anaesthesia and surgery. A total of 162 (40%) patients were exposed...... were carried out on 162 patients (89 women/73 men; mean age 49 years, range 2-85 years) with the following drugs: Lidocaine n = 80 (49%), bupivacaine n = 82 (51%), ropivacaine n = 31 (19%) and mepivacaine n = 10 (6%). All 162 patients had negative subcutaneous provocation for all tested LA (95% CI: 0...

  15. An evaluation of the utilisation of the virtual environment for radiotherapy training (VERT) in clinical radiotherapy centres across the UK

    International Nuclear Information System (INIS)

    James, Sarah; Dumbleton, Claire

    2013-01-01

    Aim: The purpose of the survey was to evaluate the utilisation of the Virtual Environment for Radiotherapy Training (VERT) in clinical radiotherapy centres across the UK. Methods: A survey questionnaire was constructed using the Survey Monkey™ tool to evaluate the utilisation of the Virtual Environment for Radiotherapy Training. Once constructed, an online link to the survey questionnaire was emailed to all radiotherapy centre managers in the UK (n = 67) who were invited to provide one response per centre. The survey comprised forty-five questions which were grouped into eleven sections. Key results: The results indicate that 61% of UK radiotherapy centres have VERT installed, twenty centres are currently without a VERT installation and only 1 centre is intending to install a system in the near future. The results also indicate that the use of VERT varies considerably in differing radiotherapy centres with the most frequent use of VERT being for the training of staff, specifically for the training of pre-registration therapeutic radiographers and preparation time for trainers. The majority of centres using VERT for any of the purposes investigated feel it provides benefits. Conclusions and recommendations: The survey highlighted the varied use of VERT in radiotherapy centres across the UK and indicated that when VERT is used in clinical radiotherapy centres, a wide variety of benefits are experienced. Because of the variation in use, it is concluded that the benefits of the VERT installations in radiotherapy centres across the UK are not being fully realised. It is recommended that all radiotherapy service managers commit adequate resources to develop and implement VERT fully and effectively so that its full potential is realised in all radiotherapy centres across the UK

  16. Differences between Drug-Induced and Contrast Media-Induced Adverse Reactions Based on Spontaneously Reported Adverse Drug Reactions.

    Science.gov (United States)

    Ryu, JiHyeon; Lee, HeeYoung; Suh, JinUk; Yang, MyungSuk; Kang, WonKu; Kim, EunYoung

    2015-01-01

    We analyzed differences between spontaneously reported drug-induced (not including contrast media) and contrast media-induced adverse reactions. Adverse drug reactions reported by an in-hospital pharmacovigilance center (St. Mary's teaching hospital, Daejeon, Korea) from 2010-2012 were classified as drug-induced or contrast media-induced. Clinical patterns, frequency, causality, severity, Schumock and Thornton's preventability, and type A/B reactions were recorded. The trends among causality tools measuring drug and contrast-induced adverse reactions were analyzed. Of 1,335 reports, 636 drug-induced and contrast media-induced adverse reactions were identified. The prevalence of spontaneously reported adverse drug reaction-related admissions revealed a suspected adverse drug reaction-reporting rate of 20.9/100,000 (inpatient, 0.021%) and 3.9/100,000 (outpatients, 0.004%). The most common adverse drug reaction-associated drug classes included nervous system agents and anti-infectives. Dermatological and gastrointestinal adverse drug reactions were most frequently and similarly reported between drug and contrast media-induced adverse reactions. Compared to contrast media-induced adverse reactions, drug-induced adverse reactions were milder, more likely to be preventable (9.8% vs. 1.1%, p contrast media-induced adverse reactions (56.6%, p = 0.066). Causality patterns differed between the two adverse reaction classes. The World Health Organization-Uppsala Monitoring Centre causality evaluation and Naranjo algorithm results significantly differed from those of the Korean algorithm version II (p contrast media-induced adverse reactions. The World Health Organization-Uppsala Monitoring Centre and Naranjo algorithm causality evaluation afforded similar results.

  17. FUNCTIONS OF A NEUROMUSCULAR CENTRE

    Directory of Open Access Journals (Sweden)

    Janez Zidar

    2004-12-01

    Full Text Available Main functions of a neuromuscular (NM centre are making diagnosis, treatment and counselling. Some other functions, e. g. forming a register and epidemiological endeavours, could be added. All these activities are expected to be achieved by multidisciplinary approach with the idea that members use the same guidelines and share the same knowledge.NM diseases affect lower levels of the nervous system that is motor units (motor cells in the brainstem and spinal cord, nerve roots, cranial and peripheral nerves, neuromuscular junction, and muscles. There are many such diseases; a few are more common others are rare.Rational approach in making a diagnosis can be divided into several steps. The process begins with a person with clinical symptoms and signs which raise the suspicion of NM disease. The first step is the description of the predominant pattern of muscular wasting and weakness (e. g. limb-girdle, distal, ocular, facio-scapulo-humeral. Each of these syndromes require a differential diagnosis within the motor unit territory what is achieved by means of EMG and muscle biopsy. The latter is even more important to define the nature of the abnormality. Disease nature can also be determined biochemically and, as NM disorders are commonly genetically determined, at the molecular genetic level. Treatment modalities include drugs (causative and symptomatic and other measures such as promoting and maintaining good general health, preventing skeletal deformities, physiotherapy, orthoses, surgery, and prevention of respiratory and cardiac functions. Counselling is mainly by social workers that focus on the practical aspects of coping with illness and disability and by genetic counsellors who gave advise on family planning.

  18. Big Surveys, Big Data Centres

    Science.gov (United States)

    Schade, D.

    2016-06-01

    Well-designed astronomical surveys are powerful and have consistently been keystones of scientific progress. The Byurakan Surveys using a Schmidt telescope with an objective prism produced a list of about 3000 UV-excess Markarian galaxies but these objects have stimulated an enormous amount of further study and appear in over 16,000 publications. The CFHT Legacy Surveys used a wide-field imager to cover thousands of square degrees and those surveys are mentioned in over 1100 publications since 2002. Both ground and space-based astronomy have been increasing their investments in survey work. Survey instrumentation strives toward fair samples and large sky coverage and therefore strives to produce massive datasets. Thus we are faced with the "big data" problem in astronomy. Survey datasets require specialized approaches to data management. Big data places additional challenging requirements for data management. If the term "big data" is defined as data collections that are too large to move then there are profound implications for the infrastructure that supports big data science. The current model of data centres is obsolete. In the era of big data the central problem is how to create architectures that effectively manage the relationship between data collections, networks, processing capabilities, and software, given the science requirements of the projects that need to be executed. A stand alone data silo cannot support big data science. I'll describe the current efforts of the Canadian community to deal with this situation and our successes and failures. I'll talk about how we are planning in the next decade to try to create a workable and adaptable solution to support big data science.

  19. IDRANAP - European Centre of Excellence

    International Nuclear Information System (INIS)

    Buzatu, Florin D.

    2003-01-01

    Selected by the European Commission (EC) experts out of 185 proposals from 11 countries, IDRANAP (Inter-Disciplinary Research and Applications based on Nuclear and Atomic Physics) is the only EC Centre of Excellence in nuclear physics. The project, initiated and developed by a remarkable team from our institute, researchers with a recognized international scientific level, has as main objectives: - promotion in Romania and in the region of modern applications derived from basic and applied research in nuclear and atomic physics; - disciplinary research in ecology, health, biology, science of materials; - specific nuclear and atomic physics research aimed to open new possibilities for applications; - to ensure stimulative conditions for PhD students from Romania and other EC candidate countries to improve their knowledge and experience by joining scientific activities in the region, a fact that might counteract their tendency to migrate to Western countries. The high scientific level of researchers, their access to national and international facilities as well as the link with prestigious laboratories abroad and the socio-economic demand motivated the development of the project. Among expected results, we mention: improving and spreading the scientific knowledge by publications; producing new facilities, devices and instruments; application of nuclear methods in industry, health-care and environment protection, and training of young researchers. The project consists of 18 workpackages structured in 5 distinct areas: - Determining environmental pollution; - Nuclear methods in biology and medicine; - Radionuclide metrology; - Analysis and characterization of materials; - Nuclei far from stability, decay modes, cosmic rays, and facilities.We make an up-to-date presentation of obtained results and activities performed within IDRANAP project, as well as a short overview of our institute. (author)

  20. The Canadian Astronomy Data Centre

    Science.gov (United States)

    Ball, Nicholas M.; Schade, D.; Astronomy Data Centre, Canadian

    2011-01-01

    The Canadian Astronomy Data Centre (CADC) is the world's largest astronomical data center, holding over 0.5 Petabytes of information, and serving nearly 3000 astronomers worldwide. Its current data collections include BLAST, CFHT, CGPS, FUSE, Gemini, HST, JCMT, MACHO, MOST, and numerous other archives and services. It provides extensive data archiving, curation, and processing expertise, via projects such as MegaPipe, and enables substantial day-to-day collaboration between resident astronomers and computer specialists. It is a stable, powerful, persistent, and properly supported environment for the storage and processing of large volumes of data, a condition that is now absolutely vital for their science potential to be exploited by the community. Through initiatives such as the Common Archive Observation Model (CAOM), the Canadian Virtual Observatory (CVO), and the Canadian Advanced Network for Astronomical Research (CANFAR), the CADC is at the global forefront of advancing astronomical research through improved data services. The CAOM aims to provide homogeneous data access, and hence viable interoperability between a potentially unlimited number of different data collections, at many wavelengths. It is active in the definition of numerous emerging standards within the International Virtual Observatory, and several datasets are already available. The CANFAR project is an initiative to make cloud computing for storage and data-intensive processing available to the community. It does this via a Virtual Machine environment that is equivalent to managing a local desktop. Several groups are already processing science data. CADC is also at the forefront of advanced astronomical data analysis, driven by the science requirements of astronomers both locally and further afield. The emergence of 'Astroinformatics' promises to provide not only utility items like object classifications, but to directly enable new science by accessing previously undiscovered or intractable

  1. The politics of patient-centred care.

    Science.gov (United States)

    Kreindler, Sara A

    2015-10-01

    Despite widespread belief in the importance of patient-centred care, it remains difficult to create a system in which all groups work together for the good of the patient. Part of the problem may be that the issue of patient-centred care itself can be used to prosecute intergroup conflict. This qualitative study of texts examined the presence and nature of intergroup language within the discourse on patient-centred care. A systematic SCOPUS and Google search identified 85 peer-reviewed and grey literature reports that engaged with the concept of patient-centred care. Discourse analysis, informed by the social identity approach, examined how writers defined and portrayed various groups. Managers, physicians and nurses all used the discourse of patient-centred care to imply that their own group was patient centred while other group(s) were not. Patient organizations tended to downplay or even deny the role of managers and providers in promoting patient centredness, and some used the concept to advocate for controversial health policies. Intergroup themes were even more obvious in the rhetoric of political groups across the ideological spectrum. In contrast to accounts that juxtaposed in-groups and out-groups, those from reportedly patient-centred organizations defined a 'mosaic' in-group that encompassed managers, providers and patients. The seemingly benign concept of patient-centred care can easily become a weapon on an intergroup battlefield. Understanding this dimension may help organizations resolve the intergroup tensions that prevent collective achievement of a patient-centred system. © 2013 John Wiley & Sons Ltd.

  2. Review of CERN Data Centre Infrastructure

    International Nuclear Information System (INIS)

    Andrade, P; Bell, T; Van Eldik, J; McCance, G; Panzer-Steindel, B; Coelho dos Santos, M; Traylen and, S; Schwickerath, U

    2012-01-01

    The CERN Data Centre is reviewing strategies for optimizing the use of the existing infrastructure and expanding to a new data centre by studying how other large sites are being operated. Over the past six months, CERN has been investigating modern and widely-used tools and procedures used for virtualisation, clouds and fabric management in order to reduce operational effort, increase agility and support unattended remote data centres. This paper gives the details on the project's motivations, current status and areas for future investigation.

  3. Attitude of Farmers towards Kisan Call Centres

    Directory of Open Access Journals (Sweden)

    Shely Mary Koshy

    2017-09-01

    Full Text Available The present study was conducted to measure the attitude of farmers in Kerala, India towards Kisan Call Centre (KCC. Kisan Call Centre provides free agricultural advisory services to every citizen involved in agriculture through a toll free number. One hundred and fifty farmers who have utilized the Kisan Call Centre service were selected from the database of KCC. The results showed that the respondents had moderately favourable attitude towards KCC followed by highly favourable attitude. The variables digital divide, temporal awareness on KCC, satisfaction towards KCC and utilization of KCC were found to have a positive correlation with the attitude of respondents towards KCC.

  4. Nuclear Power Plant Temelin Technical Support Centre

    International Nuclear Information System (INIS)

    Krizek, K.

    2000-01-01

    The erection of the Technical Support Centre for the Nuclear Power Plant Temelin has been a relatively sophisticated and costly issue. It was by proper use of the existing systems, as e.g. I and C, ISE and other systems, that a robust system has been created that is able to meet any requirements laid on the performance of the Technical Support Centre. The decision of the utility CEZ, a.s. that made it possible to establish the Technical Support Centre at the Nuclear Power Plant Temelin has been a right step which shows the level of safety culture within the utility. (author)

  5. Associating science and development - the Trieste Centre

    International Nuclear Information System (INIS)

    Hamende, A.

    1982-01-01

    The International Centre for Theoretical Physics, located in Trieste, Italy, is supported by income from the Italian Government, from UNESCO and from the IAEA. The Centre organizes research sessions, workshops and extended courses on advanced topics in the physical and mathematical sciences and encourages scientists, especially from developing countries, to visit the ICTP for extended periods. With the aim of facilitating the transfer of knowledge to scientists from developing countries, the Centre's current scientific programme is divided up into five major disciplines: physics and energy; physics and frontiers of knowledge; physics and technology; physics and the environment and natural resources; applicable mathematics

  6. The Manche Storage Centre: 2009 annual report

    International Nuclear Information System (INIS)

    2010-01-01

    After a brief presentation of the ANDRA (the French national agency for the management of radioactive wastes), this report presents the CSM installations (CSM stands for Centre de Stockage de la Manche, the Manche storage centre), recalls results and actions in the field of nuclear safety and in the field of radioprotection. It indicates incidents and accidents which occurred in the installations, presents data about the Centre's releases. It presents the waste management and evokes other pollution. It indicates the various actions undertaken for information transparency

  7. Review of CERN Data Centre Infrastructure

    CERN Document Server

    Andrade, P; van Eldik, J; McCance, G; Panzer-Steindel, B; Coelho dos Santos, M; Traylen, S; Schwickerath, U

    2012-01-01

    The CERN Data Centre is reviewing strategies for optimizing the use of the existing infrastructure and expanding to a new data centre by studying how other large sites are being operated. Over the past six months, CERN has been investigating modern and widely-used tools and procedures used for virtualisation, clouds and fabric management in order to reduce operational effort, increase agility and support unattended remote data centres. This paper gives the details on the project’s motivations, current status and areas for future investigation.

  8. Visitor centres at nuclear facility sites

    International Nuclear Information System (INIS)

    1993-01-01

    Communications strategies in the nuclear field are often based on the creation of visitor centres at nuclear facility sites. Today, the design, as well as the realization and management of such centres has become a specialized function, and its role is very complementary to the nuclear operator's. It also uses the latest technology in the field of audio-visual, experiment and interactivity. This publication contains the proceedings of an international seminar organized by the OECD Nuclear Energy Agency on the role of visitor centres at nuclear facility sites. It includes the main papers presented at this Seminar

  9. Interview with Philippe Ory of the EPFL (Ecole Polytechnique Federale de Lausanne) Career Centre. Interviewed by Debora Keller.

    Science.gov (United States)

    Ory, Philippe

    2008-06-01

    EPFL's Career Centre was created in 2007 with the mission to be a bridge between EPFL's young graduates and industry, in order to facilitate the transition to active scientific life. Through courses, workshops and personalised advice, they help graduates to set up their application documents (CV, motivation letter), prepare for job interviews and manage their careers. The Centre also offers its services to companies by organising on-campus recruitment days, actively searching for fitting profiles or posting or mailing job adverts to the EPFL graduate community. The Career Centre's goal is to be the platform for the EPFL graduates to build their careers.

  10. Preparing our learners for the challenges of the 21 st century: the ...

    African Journals Online (AJOL)

    The paper describes the current situation in school library media centres in Nigerian Secondary Schools where available data indicate that the computer is not part of the classroom technology, in 90 percent of Nigerian Public Schools. The article highlights the role of the school library media centre in preparing learners for ...

  11. The reaction index and positivity ratio revisited

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner; Andersen, Flemming

    2008-01-01

    BACKGROUND AND OBJECTIVES: Assessing the quality of patch test preparations continues to be a challenge. 2 parameters, the reaction index (RI) and positivity ratio (PR), have been proposed as quality indicators by the Information Network of Departments of Dermatology (IVDK). The value of these st......BACKGROUND AND OBJECTIVES: Assessing the quality of patch test preparations continues to be a challenge. 2 parameters, the reaction index (RI) and positivity ratio (PR), have been proposed as quality indicators by the Information Network of Departments of Dermatology (IVDK). The value...

  12. Intolerance reaction after application of glucagon during double contrast studies

    International Nuclear Information System (INIS)

    Kainberger, F.; Fruehwald, F.; Schwaighofer, B.; Lindemayr, H.

    1986-01-01

    Whereas intolerance reactions against contrast media are a well-known hazard during radiologic procedures, intolerance reactions to other preparations used in radiology are rare. Glucagon, frequently used to induce gastrointestinal hypotonia, is said to have almost no side-effects. A case of anaphylactic reaction during double-contrast upper gastrointestinal examination is reported. Pseudoallergic reaction to propylparaben, a preservative agent in glucagon, is suspected. IgE-antibodies to glucagon could not be detected by RAST. (orig.) [de

  13. Spectroscopic study of 126I via incomplete fusion reaction

    International Nuclear Information System (INIS)

    Kanagalekar, B.A.; Das, Pragya; Kumar, Vinod; Kumar, R.; Singh, R.P.; Muralithar, S.; Bhowmik, R.K.

    2006-01-01

    The experiment at Inter University Accelerator Centre consisted of identifying the yrast high-spin states of 126 I using the incomplete fusion reaction 124 Sn ( 10 B, α4n) 126 I at beam energy of 70 MeV

  14. The concept of adverse drug reaction reporting: awareness among ...

    African Journals Online (AJOL)

    Arun Kumar Agnihotri

    concept of pharmacovigilance and adverse drug reaction reporting, a section on ... ADR go undocumented worldwide8,9. ... international drug monitoring collaborating centre, ... practitioners to report all suspected ADR, the few .... more with some of the guidelines such as nurses, .... patients: a meta-analysis of prospective.

  15. Detection and Management of Adverse Drug Reactions Related to ...

    African Journals Online (AJOL)

    The objective of this study was to establish the detection, prevalence and management of various adverse drug reactions associated with antiretroviral drugs occurring in patients attending Comprehensive Care Centre (CCC) of Kiambu District Hospital. The study was a cross sectional survey where the patients included ...

  16. Silver nanoparticle catalysed redox reaction: An electron relay effect

    International Nuclear Information System (INIS)

    Mallick, Kaushik; Witcomb, Mike; Scurrell, Mike

    2006-01-01

    A silver cluster shows efficient catalytic activity in a redox reaction because the cluster acts as the electron relay centre behaving alternatively as an acceptor and as a donor of electrons. An effective transfer of electrons is possible when the redox potential of the cluster is intermediate between the electron donor and electron acceptor system

  17. Nganyi Community Resource Centre: Community radio station ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-05-04

    May 4, 2016 ... To mark World Meteorological Day on March 23, 2015, the Kenya Meteorological Services (KMS) launched a resource centre and radio station in western Kenya to disseminate weather and climate information.

  18. Social innovation for People-Centred Development

    DEFF Research Database (Denmark)

    Hulgård, Lars; P.K., Shajahan

    2013-01-01

    Social innovation is closely related to the people-centred development (PCD) framework of knowledge production. The discussion of PCD in this chapter particularly expands on the feature of empowerment and socio-political mobilization of people in social innovation...

  19. The nuclear research centre at Bariloche, Argentina

    International Nuclear Information System (INIS)

    Abriata, J.P.

    2001-01-01

    The nuclear research centre at Bariloche (CAB) is one of the four centres under the Atomic Energy Commission of Argentina (CNEA). The research programme of CAB addresses various issues like nuclear reactor development, nuclear fuel and fuel cycle, applications of radioisotopes and radiation, and waste management. There is also a basic nuclear science component. The human resource development in the areas of physics and nuclear engineering is done in an associated Balseiro Institute which has undergraduate and graduate programmes as well as doctoral and postdoctoral research. The Centre interacts well with the society and provides services in the nuclear area. It has a close interaction with the nuclear sector of Argentina as also with many international organisations. Regulatory control over the Centre is carried out by the Nuclear Regulatory Authority of Argentina. (author)

  20. International Development Research Centre Governor Travel Policy

    International Development Research Centre (IDRC) Digital Library (Canada)

    André Lavoie

    business. Governors are required to travel to conduct IDRC business, attend ... of Governors, liaise with Centre management, and perform specific representational functions on ..... Travel between Points of Origin and Destination - Air Travel.

  1. Haiti | IDRC - International Development Research Centre

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... for the environment, reduced spending on food, increased self-esteem, and stronger ... The consortium acts as a knowledge centre and explores communication ... train teachers and researchers in high-quality science and technology skills ...

  2. Bulletin #112 | IDRC - International Development Research Centre

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... to support training of African mathematical scientists on climate change solutions ... significant support following UN meeting on refugees and migrants ... for Urban Equity at India's Centre for Environmental Planning and Technology, this ...

  3. President | IDRC - International Development Research Centre

    International Development Research Centre (IDRC) Digital Library (Canada)

    International Development Research Centre Selection Criteria Education A ... or an acceptable combination of education, job-related training and/or experience. ... Knowledge of current corporate governance and human resource issues; ...

  4. Potential of Natural Ventilation in Shopping Centres

    DEFF Research Database (Denmark)

    Diederichsen, Alice; Friis, Kristina; Brohus, Henrik

    2008-01-01

    The indoor environmental quality (IEQ) is a fundamental requirement for a well performing shopping centre. This paper contains a pilot study of the potential of using hybrid ventilation (a combination of automatically controlled natural and mechanical ventilation - respectively NV and MV) in shop......The indoor environmental quality (IEQ) is a fundamental requirement for a well performing shopping centre. This paper contains a pilot study of the potential of using hybrid ventilation (a combination of automatically controlled natural and mechanical ventilation - respectively NV and MV......) in shopping centres with focus on both the achieved IEQ and energy consumptions for air movement. By thermal building simulations it is found that there exists an interesting potential for hybrid ventilation of shopping centres, which can lead to great savings in the electrical energy consumptions...

  5. Product Lifecycle Management Centre of Technology

    CSIR Research Space (South Africa)

    Barnard, Rentia

    2017-10-01

    Full Text Available - Rentia Barnard.pdf.txt Content-Type text/plain; charset=UTF-8 1 Interactive activities Contents Product Lifecycle Management Centre of Technology Rentia Barnard National Industrialisation Support Initiative (NISI) 3 Initiative (NISI...

  6. Towards Human-Centred Design

    Science.gov (United States)

    Bannon, Liam J.

    The field of HCI has evolved and expanded dramatically since its origin in the early 1980’s. The HCI community embraces a large community of researchers and practitioners around the world, from a variety of disciplinary backgrounds in the human and social sciences, engineering and informatics, and more recently, the arts and design disciplines. This kaleidoscope of cultures and disciplines as seen at INTERACT Conferences provides a rich pool of resources for examining our field. Applications are increasingly exploring our full range of sensory modalities, and merging the digital and physical worlds. WiFi has opened up a huge design space for mobile applications. A focus on usability of products and services has been complemented by an emphasis on engagement, enjoyment and experience. With the advent of ubiquitous computing, and the emergence of “The Internet of Things”, new kinds of more open infrastructures make possible radically new kinds of applications. The sources of innovation have also broadened, to include human and social actors outside of the computing and design organizations. The question is to what extent is our mainstream thinking in the HCI field ready for the challenges of this Brave New World? Do the technological and social innovations that we see emerging require us to re-shape, or even, re-create, our field, or is it a case of a more gradual evolution and development of that which we already know? In this closing Keynote, I will provide a perspective on the evolution and development of the HCI field, looking backwards as well as forwards, in order to determine what are some of the changes of significance in the field. This “broad-brush” approach to what I term “ human-centred design” will be complemented by the examination of specific projects and applications, to help anchor some of the discussion. Areas such as user-centred design, participatory design, computer-supported cooperative work and learning, and interaction design, in

  7. Nuclear research centres - The Egyptian experiment

    International Nuclear Information System (INIS)

    Abdelrazek, I.D.

    2001-01-01

    The Atomic Energy Authority of Egypt has four research centres located at two sites. Its research reactors are devoted to the production of isotopes, neutron beam experiments, activation analysis and materials research. The accelerators are devoted to the production of short lived isotopes for medical applications and materials R and D. Irradiation technology is used for sterilization of medical supplies and food preservation. High level of expertise in those centres is also useful for other developmental activities in Egypt. (author)

  8. White-centred retinal haemorrhages (Roth spots).

    OpenAIRE

    Ling, R.; James, B.

    1998-01-01

    Roth spots (white-centred retinal haemorrhages) were classically described as septic emboli lodged in the retina of patients with subacute bacterial endocarditis. Indeed many have considered Roth spots pathognomonic for this condition. More recent histological evidence suggests, however, that they are not foci of bacterial abscess. Instead, they are nonspecific and may be found in many other diseases. A review of the histology and the pathogenesis of these white-centred haemorrhages will be p...

  9. Karlsruhe Nuclear Research Centre. Programme budget 1988

    International Nuclear Information System (INIS)

    1987-01-01

    Following a general survey of tasks, planned activities and developmental trends of the nuclear research centre, the report gives an account of the activities to be performed in the subject fields of main interest, showing the budgeting figures for annual expenditure (for personnel, investments, operating costs) up to the year 1991. Further information explains the infrastructure of the centre and the distribution of overall expenditure as well as the budgetary planning. (UA) [de

  10. The CSN's Information Centre: a necessary venture

    International Nuclear Information System (INIS)

    Calvo, A.

    1999-01-01

    Every year, around 10,000 pupils will visit the CSN's Information Centre, an exposition area which was created with the intention of explaining simply but strictly, what radiations are, for what they are used, what risks they hold and how they are controlled. Opened in October, 1998, encouraged by Parliamentary urging, the Centre is a path to CSN Information for citizens to use. (Author)

  11. User-Centred BCI Videogame Design

    OpenAIRE

    Loup-Escande , Emilie; Lotte , Fabien; Loup , Guillaume; Lécuyer , Anatole

    2015-01-01

    International audience; This chapter aims to offer a user-centred methodological framework to guide the design and evaluation of Brain-Computer Interface videogames. This framework is based on the contributions of ergonomics to ensure these games are well suited for their users (i.e., players). It provides methods, criteria and metrics to complete the different phases required by ae human-centred design process. This aims to understand the context of use, specify the user needs and evaluate t...

  12. Joint Research Centre. Ispra establishment-Italy

    International Nuclear Information System (INIS)

    Angelini, Antonio

    1976-01-01

    A comprehensive review of the work carried out during 1974 and 1975 in the Ispra establishment of the Joint Research Centre is presented. A description of the activity carried out within the context of the running programmes is given. Some of the most relevant scientific and technical achievement are described from the viewpoints of the Scientific Departments of the Centre. The technical and administrative support activities are also presented. A list of publications issued by the Ispra Scientific staff is given

  13. Automatic centring and bonding of lenses

    Science.gov (United States)

    Krey, Stefan; Heinisch, J.; Dumitrescu, E.

    2007-05-01

    We present an automatic bonding station which is able to center and bond individual lenses or doublets to a barrel with sub micron centring accuracy. The complete manufacturing cycle includes the glue dispensing and UV curing. During the process the state of centring is continuously controlled by the vision software, and the final result is recorded to a file for process statistics. Simple pass or fail results are displayed to the operator at the end of the process.

  14. Building an applied activation analysis centre

    International Nuclear Information System (INIS)

    Bartosek, J.; Kasparec, I.; Masek, J.

    1972-01-01

    Requirements are defined and all available background material is reported and discussed for the building up of a centre of applied activation analysis in Czechoslovakia. A detailed analysis of potential users and the centre's envisaged availability is also presented as part of the submitted study. A brief economic analysis is annexed. The study covers the situation up to the end of 1972. (J.K.)

  15. Ukrainian Nuclear Data Centre Progress Report, 2010/11. Summary of Nuclear Data Studies by Staff of the Ukrainian Nuclear Data Centre

    International Nuclear Information System (INIS)

    Gritzay, O.

    2011-01-01

    Full text: Ukrainian Nuclear Data Centre (UkrNDC) is subdivision within the Neutron Physics Department at the Institute for Nuclear Research of the National Academy of Sciences of Ukraine. UkrNDC has 5 permanent researchers. During year under review three members of the staff were involved in experimental neutron data measurements at the Kyiv research reactor. Compilation: We continue collection and compilation of experimental neutron, charged particle and photonuclear data. Number of the EXFOR's entries sent to the NDS IAEA by UkrNDC are the following. New: for neutron data - 1 entries (32231); for charged particle data - 4 entries (D5074, D5075, D5077, D5078); for photonuclear data - 4 entries (G4030 - G4033). Improved: for neutron data - 5 entries (32217, 32219, 32222 - 32224); for charged particle data - 15 entries (D5001, D5002, D5023, D5030, D5039- D5042, D5051, D5066 - D5068, D5070, D5071, D5073); for photonuclear data - 2 entries (G4011, G4018). We realize review of compilation scope in home journals: ''Nuclear Physics and Atomic Energy''; ''Ukrainian Journal of Physics''; ''Problems of Atomic Science and Technology'', Series ''Nuclear Physics Investigations''. Collaboration: We continue our collaboration with the Nuclear Physics Department of the Taras Shevchenko National University of Kyiv. The teaching course 'Nuclear Data for Science and Technology and modern computer codes for nuclear data processing' (36 hours) has been lectured in 2010-2011 for the fifth-course students of NPD KNU. This course includes the following items: ENDF/B libraries, EXROR system, ENSDF library, the use of the PREPRO code in work with the ENDF libraries, the introduction to NJOY code system, the Network of Nuclear Reaction Data Centers and the use of the on-line services; The teaching courses 'Neutron Physics' (72 hours) and 'Neutron Physics at the Kyiv Research Reactor' (experimental work, 36 hours) are lectured in 2010-2011 for fourth-year students of NPD KNU; The teaching

  16. The Imperial College Thermophysical Properties Data Centre

    Science.gov (United States)

    Angus, S.; Cole, W. A.; Craven, R.; de Reuck, K. M.; Trengove, R. D.; Wakeham, W. A.

    1986-07-01

    The IUPAC Thermodynamic Tables Project Centre in London has at its disposal considerable expertise on the production and utilization of high-accuracy equations of state which represent the thermodynamic properties of substances. For some years they have been content to propagate this information by the traditional method of book production, but the increasing use of the computer in industry for process design has shown that an additional method was needed. The setting up of the IUPAC Transport Properties Project Centre, also at Imperial College, whose products would also be in demand by industry, afforded the occasion for a new look at the problem. The solution has been to set up the Imperial College Thermophysical Properties Data Centre, which embraces the two IUPAC Project Centres, and for it to establish a link with the existing Physical Properties Data Service of the Institution of Chemical Engineers, thus providing for the dissemination of the available information without involving the Centres in problems such as those of marketing and advertising. This paper outlines the activities of the Centres and discusses the problems in bringing their products to the attention of industry in suitable form.

  17. An alkali-metal ion extracted layered compound as a template for a metastable phase synthesis in a low-temperature solid-state reaction: preparation of brookite from K0.8Ti1.73Li0.27O4.

    Science.gov (United States)

    Ozawa, Tadashi C; Sasaki, Takayoshi

    2010-03-15

    We have designed a new approach to synthesize brookite, i.e., to extract alkali-metal ions from K(0.8)Ti(1.73)Li(0.27)O(4) (KTLO) and to apply simultaneous heat treatment to the remaining lepidocrocite-type layers of TiO(6) octahedra. For the alkali-metal ion extraction and the simultaneous heat treatment, KTLO was heated at 400 degrees C with polytetrafluoroethylene (PTFE) in flowing Ar. PTFE has been found to be an effective agent to extract strongly electropositive alkali-metal ions from KTLO because of the strong electronegativity of F as its component. The product of this reaction consists of a mixture of brookite, K(2)CO(3), LiF, and PTFE derivatives, indicating the complete extraction of K(+) and Li(+) from KTLO and formation of brookite from the lepidocrocite-type layer of TiO(6) octahedra as a template. This brookite has a partial replacement of O(2-) with F(-) and/or slight oxygen deficiency; thus, its color is light-bluish gray. Fully oxidized brookite formation and complete decomposition of PTFE derivatives have been achieved by further heating in flowing air, and coproduced alkali-metal salts have been removed by washing in water. Powder X-ray diffraction, Raman spectroscopy, and chemical analysis results have confirmed that the final brookite product treated at 600 degrees C is single phase, and it is white. The method to extract alkali-metal ions from a crystalline material using PTFE is drastically different from the common methods such as soft-chemical and electrochemical reactions. It is likely that this new synthetic approach is applicable to other layered systems to prepare a diverse family of compounds, including novel metastable ones.

  18. Vanadocene reactions with hydroxy acids

    International Nuclear Information System (INIS)

    Latyaeva, V.N.; Lineva, A.N.; Zimina, S.V.; Ehllert, O.G.; Arsen'eva, T.I.

    1984-01-01

    To prepare a series of vanadium cyclopentadienylcarboxylates soluble in water, the vanadocene reactions with lactic, γ-oxybutyric-, salicylic,- gallic-, orotic-, and acetylsalicylic acids have been studied. To determine the influence of cyclopentadienyl groups, bound with a vanadium atom, on the physiological activity of the complexes formed, vanadium halides are made to react with lactic acid. Only the vanadocene reaction with orotic acid was conducted in an aqueous medium, other interactions were realized in the diethyl ether, toluene, T, H, P medium. The interaction of vanadocene and vanadium halides with lactic-, salicylic-, acetylsalicylic- and gallic acids was found to lead to the formation of water-soluble vanadium complexes of Cp 2 , VOCOR or CpV (OCOR) 2 type. The data on the produced compounds yield, their IR spectra, decomposition temperatures, solubility, effective magnetic moments are presented

  19. Preparation of Metal Nanoparticles via Sonochemical Reduction

    OpenAIRE

    Saura Puig, Oriol

    2011-01-01

    Pure nickel, copper and zinc nanoparticles were prepared from chlorides of these elements using ultrasound with three different reducing agents (zinc, aluminum and magnesium). In the second part, syntheses of nickel-copper alloy and nickel-zinc using ultrasound were investigated. The products were characterized by powder X-ray diffraction. The reaction parameters, such as sonification time, the amount of reagents and reaction conditions were modified to observe variations in...

  20. The international ISOE programme. ISOE European technical centre activities

    International Nuclear Information System (INIS)

    Ascenzo, L. d'; Crouail, P.; Levy, F.; Livolsi, P.; Schieber, C.; Lefaure, C.

    1996-01-01

    The CEPN has been involved from the beginning in the NEA Information System on Occupational Exposure (ISOE). As ISOE European Technical Centre, the CEPN is responsible for the collection and distribution of European data to the various ISOE partners, the collection of data from the other regional technical centres, and the custodianship of the full ISOE data base. This full data base is updated annually and distributed to all the European participating utilities and to other Regional Technical Centres. The European data are also sent to the European Commission (EC) as a contribution to their own occupational exposure data base. In addition to these activities, the CEPN has developed two computer programmes under Windows to facilitate the management of ISOE data bases. The first software, called ASPIC, allows participating utilities to electronically complete NEA1 and NEA3 questionnaires, as well as to consult the NEA3 data base using key words search routine. This software is available in six different languages. The second programme is a relational data base for the performance of statistical analyses using data from NEA1. The CEPN also contributes significantly to the efficient flow of information through the ISOE Network. This includes participation in the preparation and distribution of the ISOE Annual Report (which presents and analyses NEAI data), ISOE Information Sheets (providing short synthesis using NEA1 and NEA3 data), and Technical Reports. Participating Authorities and Utilities have each made information requests to the CEPN concerning dosimetric data, radiation protection experiences, policies and practices. Some examples of these requests, and of the types of data provided, will be presented. (author)