WorldWideScience

Sample records for rc digital em

  1. Implementation of RC5 and RC6 block ciphers on digital images

    Belhaj Mohamed, A.; Zaibi, G.; Kachouri, A.

    2011-01-01

    With the fast evolution of the networks technology, the security becomes an important research axis. Many types of communication require the transmission of digital images. This transmission must be safe especially in applications that require a fairly high level of security such as military applications, spying, radars, and biometrics applications. Mechanisms for authentication, confidentiality, and integrity must be implemented within their community. For this reason, several cryptographic algorithms have been developed to ensure the safety and reliability of this transmission. In this paper, we investigate the encryption efficiency of RC5 and RC6 block cipher applied to digital images by including a statistical and differential analysis then, and also we investigate those two block ciphers against errors in ambient noise. The security analysis shows that RC6 algorithm is more secure than RC5. However, using RC6 to encrypt images in rough environment (low signal to noise ratio) leads to more errors (almost double of RC5) and may increase energy consumption by retransmitting erroneous packets. A compromise security/energy must be taken into account for the good choice of encryption algorithm.

  2. NASA-LaRc Flight-Critical Digital Systems Technology Workshop

    Meissner, C. W., Jr. (Editor); Dunham, J. R. (Editor); Crim, G. (Editor)

    1989-01-01

    The outcome is documented of a Flight-Critical Digital Systems Technology Workshop held at NASA-Langley December 13 to 15 1988. The purpose of the workshop was to elicit the aerospace industry's view of the issues which must be addressed for the practical realization of flight-critical digital systems. The workshop was divided into three parts: an overview session; three half-day meetings of seven working groups addressing aeronautical and space requirements, system design for validation, failure modes, system modeling, reliable software, and flight test; and a half-day summary of the research issues presented by the working group chairmen. Issues that generated the most consensus across the workshop were: (1) the lack of effective design and validation methods with support tools to enable engineering of highly-integrated, flight-critical digital systems, and (2) the lack of high quality laboratory and field data on system failures especially due to electromagnetic environment (EME).

  3. Uso de digital em idosos admitidos em unidade de geriatria de um hospital geral

    Cunha Ulisses Gabriel de Vasconcelos

    1998-01-01

    Full Text Available OBJETVO: Detectar a freqüência da prescrição do digital, assim como as suas indicações, em idosos admitidos em unidade de geriatria de um hospital geral. MÉTODOS: Foram investigados, consecutivamente, 130 pacientes não selecionados, de ambos os sexos (100 mulheres e 30 homens, com idades > ou = 65 (média 80±9 anos. Os pacientes foram avaliados através de exame clínico completo, rotina básica de sangue, radiografia simples de tórax, eletrocardiograma e ecocardiograma Doppler. Baseados na avaliação clínica e exames complementares, o uso do digital foi considerado adequado, questionável ou inadequado. RESULTADOS: Estavam em uso de digital 27,6% dos pacientes. A indicação foi considerada adequada em 36,1%, questionável em 11,1% e inadequada em 52,7%. CONCLUSÃO: Uma alta prevalência de prescrição do digital foi detectada nos idosos admitidos, sendo que a maior parte a adotava por razões consideradas inadequadas ou questionáveis. Devido ao risco aumentado de intoxicação digitálica nessa faixa etária, a droga deveria ser prescrita sob indicações mais criteriosas.

  4. On RC-spaces

    Bielas, Wojciech; Plewik, Szymon

    2018-01-01

    Following Frink's characterization of completely regular spaces, we say that a regular T_1-space is an RC-space whenever the family of all regular open sets constitutes a regular normal base. Normal spaces are RC-spaces and there exist completely regular spaces which are not RC-spaces. So the question arises, which of the known examples of completely regular and not normal spaces are RC-spaces. We show that the Niemytzki plane and the Sorgenfrey plane are RC-spaces.

  5. TRANSMUTAÇÕES DA ESCRITA EM SUPORTE DIGITAL

    Maria Lucia Santaella Braga

    2012-07-01

    Full Text Available Este artigo tem por objetivo percorrer a trajetória da escrita desde suas inscrições em suportes mais primitivos, passando pelo papel e o advento do livro impresso, na era gutenberguiana, cuja cultura reinou com soberania durante alguns séculos, até chegar à revolução digital quando a escrita saltou do papel impresso para as telas eletrônicas. Nesse momento a escrita muda de natureza, pois o computador permite a mistura inconsútil das três matrizes da linguagem, o verbal, o visual e o sonoro. Além disso, permite a subdivisão da informação em parcelas que se conectam sob ação do usuário, o que cria uma nova linguagem hipertextual e hipermidiática.

  6. Biblioteca Digital do Supremo Tribunal Federal: uma proposta em desenvolvimento

    Maria Tereza Machado Teles Walter

    2017-12-01

    Full Text Available As t e c n o l o g i as d e i nf o rm a ç ã o e d e c om u n i c a ç ã o revolucionaram as formas de organização e de mediação de informação em todas as instituições prestadoras de serviço, sejam elas bibliotecas ou centros de documentação. Seu desenvolvimento passou a ser uma questão estratégica de planejamento para as instituições que desejem manter-se em consonância com demandas cada vez mais especializadas e atender usuários que têm modelos mentais e conhecimentos de uso de informação em ambientes digitais. Reconhecendo esse cenário, foi elaborado, pela Coordenadoria de Biblioteca do Supremo Tribunal Federal, o projeto de desenvolvimento de sua Biblioteca Digital, cuja definição foi a de se tratava de um ambiente em meio eletrônico, para prestação de serviços e oferta de produtos, que incluem textos integrais e que independem da presença física dos usuários. O histórico desse projeto é apresentado incluindo as etapas e os perfis profissionais que atuaram no desenvolvimento do trabalho. Em função das características das propostas, todo o projeto foi modularizado visando facilitar sua implantação, de forma que independesse de mudanças na alta gestão do órgão. Alguns resultados dessa proposição são relacionados ao final.

  7. A hybrid damping method for LLCL-filter based grid-tied inverter with a digital filter and an RC parallel passive damper

    Wu, Weimin; Lin, Zhe; Sun, Yunjie

    2013-01-01

    Grid-tied inverters have been widely used to inject the renewable energies into the distributed power generation systems. However, a large variation of the grid impedance challenges the stability of the high-order power filter based grid-tied inverter. Many passive and active damping methods have...... been proposed to overcome this issue. Recently, a composite passive damping method for a high-order power filter based grid-tied inverter with an RC parallel damper and an RL series damper was presented to eliminate this problem, but at the cost of more material and power losses. In this paper...

  8. Letramento digital e letramento informacional na literatura nacional e internacional em língua inglesa

    Lima, Alberto José Ferreira de

    2012-01-01

    Na última década, constata-se o crescente interesse pelos estudos voltados ao letramento informacional e letramento digital na literatura nacional e internacional em língua inglesa, o qual se reflete, principalmente, no número de publicações sobre esses temas. O propósito deste estudo é comparar na produção acadêmica nacional e internacional em língua inglesa as concepções, os usos e as relações entre letramento digital e letramento informacional. A fim de atingir os objetivos propostos ...

  9. New Canonic Active RC Sinusoidal Oscillator Circuits Using Second-Generation Current Conveyors with Application as a Wide-Frequency Digitally Controlled Sinusoid Generator

    Abhirup Lahiri

    2011-01-01

    Full Text Available This paper reports two new circuit topologies using second-generation current conveyors (CCIIs for realizing variable frequency sinusoidal oscillators with minimum passive components. The proposed topologies in this paper provide new realizations of resistance-controlled and capacitor-controlled variable frequency oscillators (VFOs using only four passive components. The first topology employs three CCIIs, while the second topology employs two CCIIs. The second topology provides an advantageous feature of frequency tuning through two grounded elements. Application of the proposed circuits as a wide-frequency range digitally controlled sinusoid generator is exhibited wherein the digital frequency control has been enabled by replacing both the capacitors by two identical variable binary capacitor banks tunable by means of the same binary code. SPICE simulations of the CMOS implementation of the oscillators using 0.35 μm TSMC CMOS technology parameters and bipolar implementation of the oscillators using process parameters for NR200N-2X (NPN and PR200N-2X (PNP of bipolar arrays ALA400-CBIC-R have validated their workability. One of the oscillators (with CMOS implementation is exemplified as a digitally controlled sinusoid generator with frequency generation from 25 kHz to 6.36 MHz, achieved by switching capacitors and with power consumption of 7 mW in the entire operating frequency range.

  10. Pragmatismo peirciano e os movimentos sociais em contexto digital

    Dbora de Carvalho Pereira

    2012-06-01

    Full Text Available Este artigo articula o conceito de pragmatismo peirciano, que evidencia como se formam as crenas, com o estudo da emergncia das redes scio-semiticas. A partir deste arcabouo conceitual, realizada uma anlise exploratria dos sites do Avaaz e Wikileaks. Ambos dinamizam a mobilizao social em espaos virtuais, sendo que o primeiro atravs de campanhas com linguagem publicitria e o segundo a partir da divulgao de denncias por milhares de documentos sigilosos oficiais vazados. Nos processos semisicos dos dois casos, possvel encontrar diferentes nveis de interpretante, na relao pragmtica do signo com seu objeto.

  11. <em>Percorsi linguistici e semiotici: Critical Multimodal Analysis of Digital Discourseem>

    edited by Ilaria Moschini

    2014-01-01

    The language section of LEA - edited by Ilaria Moschini - is dedicated to the Critical Multimodal Analysis of Digital Discourse, an approach that encompasses the linguistic and semiotic detailed investigation of texts within a socio-cultural perspective. It features an interview with Professor Theo van Leeuwen by Ilaria Moschini and four essays: “Retwitting, reposting, repinning; reshaping identities online: Towards a social semiotic multimodal analysis of digital remediation” by Elisabetta A...

  12. T-Learning: limites e possibilidades em televisão digital interativa

    Caram, Nirave Reigota [UNESP

    2012-01-01

    A presente dissertação tem como objetivo investigar os limites e possibilidades do T-learning em Televisão Digital Interativa. O foco é o ensino a distância (EaD) para obtenção de educação formal, ou seja, cursos EaD resultem em certificação reconhecida. O trabalho recupera algumas iniciativas que enfrentam esse desafio e discute as novas possibilidades que se abrem com a Televisão Digital, a partir da interatividade. Neste cenário, é necessário pensar como os cursos já existentes podem migra...

  13. Ma-rc-h

    maheshwarii, a new rubiaceous tax.onare some examples. The broad spectrum of botany which. Maheshwari portrayed made him welcome in labo- ratories of .... spicuous because of his perennial service to botany and sustained contributions to plant em- bryology, Maheshwari was elected Fellow of the. Royal Society of ...

  14. Analysis of medical exposures in digital mammography; Analise das exposicoes medicas em mamografia digital

    Oliveira, Sergio R., E-mail: oliveirasr@fiocruz.br [Escola Politecnica de Saude Joaquim Venancio (EPSJV/FIOCRUZ), Rio de Janeiro, RJ (Brazil); Mantuano, Natalia O.; Albrecht, Afonso S., E-mail: nataliamantuano@gmail.com, E-mail: afonsofismed@gmail.com [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil). Instituto de Fisica; Flor, Leonardo S., E-mail: leonardo.flor@hsvp.org.br [Hospital Sao Vicente de Paulo (HSVP), Rio de Janeiro, RJ (Brazil)

    2014-07-01

    Currently, the use of digital mammography in the early diagnosis of breast cancer is increasingly common due to the production of high definition image that allows to detect subtle changes in breast images profiles. However it is necessary to be an improvement of the technique used since some devices offer minimization parameters of entrance dose to the skin. Thus, this study seeks to examine how the qualification of technical professionals in radiology interferes with the use of the techniques applied in mammography. For this, survey was carried out in a hospital in the city of Rio de Janeiro, which evaluated the scans of 1190 patients undergoing routine mammography (It is considered routinely the 4 basic exhibitions: with 2 flow skull and 2 medium oblique side, excluding repeats and supplements) in 2013. The medical exposures analyzed obtained from a single full digital equipment, model Senographe DS were compared with three different procedures performed by professionals in mammography techniques. The images were classified according to exposure techniques available in the equipment: Standard (STD), contrast (CNT) and dose (dose), and to be selected as breast density of the patient. Comparing the variation of the radiographic technique in relation to the professional who made the exhibition, what is observed is that the professional B presented the best conduct in relation to radiological protection, because she considered breast density in the choice of technical equipment parameter. The professional A, which is newly formed, and C, which has more service time, almost did not perform variations in the pattern of exposure, even for different breast densities. Thus, we can conclude that there is a need to update the professionals so that the tools available of dose limitation and mamas variability to digital mammography are efficiently employed in the service routine and thus meet the requirements of current legislation.

  15. MULTI/NOVOS LETRAMENTOS EM AMBIENTE DIGITAL: UMA ANÁLISE DO GOOGLE SEARCH EDUCATION

    Cláudia Gomes

    2015-09-01

    Full Text Available Resumo: Este artigo objetiva analisar o conteúdo relativo ao Google Search Education – material digital de cunho pedagógico –, tendo em vista a possibilidade de publicação e republicação de informações por qualquer usuário da web e o uso de ferramentas e estratégias de busca na internet, um dos aspectos da leitura em ambiente digital. Como aporte teórico, este trabalho se baseia nos estudos dos novos e multiletramentos, relacionando as quatro dimensões do New London Group (1996 – Prática Situada, Instrução Explícita, Concepção Crítica e Prática Transformada – aos processos de conhecimento Experienciando, Conceitualizando, Analisando e Aplicando, propostos por Kalantzis & Cope (2011. O Google Search Education consiste em cinco Planos de Aula que tratam do uso de operadores, filtros, fontes, páginas e tipos de arquivo para viabilizar escolhas de termos apropriados, compreensão e análise de resultados e avaliação crítica de conteúdos de pesquisa. Este conteúdo foi descrito e analisado de acordo com a categorização adotada, considerando seu potencial para a pesquisa online. Em caráter complementar ao apresentado no material digital, apresenta-se uma proposta de atividade com vistas a contemplar a Prática Transformada, a fim de que os alunos possam transitar por todas as dimensões idealizadas pela teoria dos multiletramentos.   Este obra está licenciado com uma Licença Creative Commons Atribuição-NãoComercial 4.0 Internacional.

  16. O uso da tecnologia digital em turismo e em hospitalidade no relacionamento com consumidores

    Funcia, Thais da Silva

    2010-01-01

    O objetivo geral do trabalho é estudar as formas de utilização da tecnologia digital no relacionamento com consumidores pelas empresas de turismo e de hospitalidade. Especificamente, objetiva caracterizar os recursos tecnológicos digitais utilizados pelas empresas no relacionamento com os clientes, com ênfase particular sobre a web 2.0, o e-commerce e a telefonia móvel. O trabalho apresenta um referencial teórico composto por autores nas áreas de turismo e de hospitalidade, marketing de servi...

  17. Advantages obtained in radiation protection when using computerized radiography tests - CR (digital) in processing plants; Vantagens obtidas em radioprotecao quando do uso do ensaio de radiografia computadorizada - RC (digital) em plantas de processo

    Jose, Joao Carlos Videira; Milani, Hilton Sergio B.; Paes, Eliseu Almir de Oliveira; Boita, Mario de [ARCtest Servicos Tecnicos de Inspecao e Manutencao Industrial Ltda., Sao Paulo, SP (Brazil)]. E-mail: tecnica@arctest.com.br; Souza, Laercio de; Serra, Flavio Augusto dos Santos [PETROBRAS, Paulinia, SP, RJ (Brazil). Refinaria do Planalto Paulista (REPLAN)]. E-mails: laerciosouza@petrobras.com.br; serra@petrobras.com.br

    2002-07-01

    During the year 2000, the ARCtest initiated the development of the research for adapting the Computerized Radiography - CR, originally conceived for medical applications, for the Industry, trying initially to attend the requirements of the processing plants, concerning to the detection of deterioration mechanisms (evaluation of the piping integrity). Due to the obtained excellent results, the possibility of utilization the Computerized Radiography - CR in the radiographic inspection were studied during the shutdown of the Catalytic Cracking Unit of the PETROBRAS-REPLAN, specifically in the replacement of the CO boiler superheater, where a large number of the small diameter welded joints have been predicted.

  18. Altitmeter for RC aircraft models

    Švec, Jan

    2012-01-01

    Předmětem mé bakalářské práce je návrh výškoměru, který využívá pro záznam letové polohy modelu RC letadla vyhodnocování aktuálního atmosferického tlaku. Údaje jsou po dobu letu ukládány do paměti, odkud je možné je po skončení záznamu přes rozhraní USB uložit v PC. Software na PC zajišťuje komunikaci se zařízením a přepočet zaznamenaného tlaku na nadmořskou výšku RC modelu. The aim of my bachelor thesis is to design a altimeter, who uses to record the attitude of the model "RC plane" eval...

  19. Certificação digital de exames em telerradiologia: um alerta necessário Digital certification in teleradiology: a necessary warning

    Luiz Felipe Nobre

    2007-12-01

    Full Text Available A crescente popularização das atividades de telemedicina em todo o mundo tem exigido de médicos e demais profissionais da saúde novas abordagens em sua prática profissional. No que se refere à telerradiologia, observamos forte tendência à transformação de documentos clínicos - como resultados de exames, que até hoje existiam na forma de filmes impressos e laudos em papel - em documentos eletrônicos, disponibilizados em redes internas de clínicas e hospitais, ou pela internet. Esta tendência torna necessária a divulgação e o esclarecimento de conceitos como a certificação digital, a criptografia de dados na internet, a confiabilidade de sites, o documento eletrônico confiável e a assinatura digital. Os princípios básicos desses conceitos, embora por vezes complexos para os profissionais da saúde, podem ser compreendidos de forma efetiva sem que o leitor tenha de mergulhar de cabeça em labirintos como a matemática da criptografia de chaves assimétricas ou os protocolos de comunicação digital de dados. Neste artigo abordaremos de forma direta e com exemplos práticos os aspectos de segurança e confiabilidade de documentos clínicos eletrônicos baseados na internet, com o objetivo de que os usuários médicos possam interagir de forma informada, segura e bem fundamentada com serviços de telerradiologia.The increasing worldwide popularization of telemedicine activities has demanded a new approach to the professional practice by physicians and other health professionals. As far as teleradiology is concerned, a remarkable trend has been observed toward the transformation of clinical documents - like radiological studies results, that so far existed as printed films and paper-based reports - into electronic documents available in internal networks of medical clinics and hospitals or through the internet. As a result of this trend, it is necessary to divulge and explain concepts such as digital certification, internet

  20. Digitization

    Finnemann, Niels Ole

    2014-01-01

    what a concept of digital media might add to the understanding of processes of mediatization and what the concept of mediatization might add to the understanding of digital media. It is argued that digital media open an array of new trajectories in human communication, trajectories which were...

  1. Electronically tunable RC sinusoidal oscillators

    Florescu, Valeriu

    2008-01-01

    This paper presents two types of active configurations for realizing electronically tunable RC sinusoidal oscillators. The type-1 network employs two grounded scaled resistances KR 1 and KR 2 , where K is scaling factor. The frequency of oscillation W 0 is controlled conveniently by adjusting K, since W 0 appears in the form W 0 =1/K √ R 1 C 1 R 2 C 2 . For realizing the scaled resistances, an active configuration is proposed, which realizes KR 1 =R 1 /(1+f(V B )), where f(V B ) denotes a function of a controlling voltage V B . Thus the frequency tuning can be effected by controlling a voltage V B . The type-2 oscillator uses two periodically switched conductances. It is shown that the tuning of oscillation frequency can be done by varying the pulse width-to-period ratio (t/T) of the periodically switched conductances. (author)

  2. História em quadrinhos e cinema: meios cada vez mais próximos no ambiente digital

    Cappellari, Márcia Schmitt Veronezi

    2009-01-01

    Full Text Available A sequência é o principal fator de ligação entre duas das mais apaixonantes formas de comunicação de todos os tempos: o cinema e as histórias em quadrinhos. O surgimento da internet e as possibilidades que o meio dispõe estão proporcionando uma aproximação cada vez maior entre ambos. Os cybercomics estão ganhando som e movimento, rompendo barreiras com o que antes havia sido produzido analogicamente em histórias em quadrinhos. Desse modo, definir o que ainda é desenho seriado e o que é cinema no mundo digital pode acabar se tornando apenas uma questão de ponto de vista

  3. O ensino da biblioteca digital nos currículos de graduação em Biblioteconomia / Teaching of digital library subject in librarianship undergraduate curriculum

    Barbara Olinda de Castro

    2013-05-01

    Full Text Available O presente trabalho é uma pesquisa exploratória realizada junto aos coordenadores de cursos de graduação em Biblioteconomia, sobre o ensino de biblioteca digital nas Instituições de Ensino Superior no Brasil. Nela foi possível identificar se atualmente esses cursos de graduação estão preocupados em transmitir o assunto aos alunos, visando à formação profissional, para o futuro que vem abrindo portas nesta área. Com o levantamento foi possível analisar: se há uma disciplina específica ou um módulo dentro de uma disciplina; a língua em que se encontra a bibliografia adotada; se possui aulas práticas; em que semestre do fluxo acadêmico é oferecida; se é obrigatória ou optativa; a frequência de oferta; a formação do professor que ministra o conteúdo; se é oferecida no próprio departamento; e se a instituição oferece seminários sobre o assunto.

  4. A hipermídia como expressão do conteúdo dramático em narrativa digital interativa: uma análise em livro digital interativo infantil

    Deglaucy Jorge Teixeira

    2015-07-01

    Full Text Available A produção e a oferta de livros digitais estão em crescente expansão, principalmente dos ebooks com maior possibilidade de interação - os livros digitais interativos infantis, também denominados de book apps infantis. No entanto, neste conteúdo, a falta de coerência entre informações midiáticas, interatividade e informações narrativas pode distrair a atenção do leitor, prejudicando a apreensão do texto. Diante disso, o objetivo deste estudo foi propor uma análise para livro digital interativo infantil, na perspectiva do design de hipermídia, relacionando os elementos expressivos da hipermídia com o conteúdo dramático da narrativa. Nesse sentido, realizou-se uma pesquisa qualitativa de natureza aplicada com base exploratória e descritiva para análise do book apps infantil Cowzat!, vencedor Digital Book Awards 2014. Os resultados mostraram a importância de relacionar os elementos de expressão da hipermídia com o conteúdo dramático para que as informações em uma narrativa digital façam sentido e envolvam o leitor na história de forma integral.

  5. DocênciaS na/com a contemporaneidade: experiências (transformadoras em meio à cultura digital e em rede

    Adriana Rocha Bruno

    2015-12-01

    Full Text Available http://dx.doi.org/10.5007/2175-795X.2015v33n2p589 O presente artigo aborda as docênciaS na contemporaneidade, em meio à cultura digital e em rede. A multiplicidade, uma das marcas do mundo atual, convoca todos à distorção de olhares, maximização de percepções, escutas e odores, eclosão de paladares, para a vivência paradoxal, em dimensões atemporais e pluriespaciais. O diverso e o plural coexistem e, assim, são contraditórios, complexos e também instigantes. Para falar/pensar em processos formativos, docência e discência, neste contexto faz-se necessário plurificar. Dessa forma, justifica-se a expressão docênciaS, com destaque para a letra S, plural, múltipla. Para tratar de um tema tão vasto e complexo, são apresentados três pontos de “flexão”: 1 Oroboro: a persistência/insistência da docência apartada da discência; 2 a cultura digital e em rede: desdobrando ideias para a prática do desapego; 3 temas e dilemas atuantes como campo de possibilidades nas/com as docênciaS contemporâneas. Todos estes pontos são desenvolvidos/debatidos por meio das pesquisas que foram realizadas nos últimos anos, em articulação com as experiências de docências, agenciadas pelas investigações sobre as práticas pedagógicas cocriadas na cibercultura.   Teaching in/with the contemporaneity: (transforming experiences through the digital and networked culture  Abstract This article discusses the teaching(S (in the plural in contemporary times, in the midst of digital culture and networked. The multiplicity, one of the hallmarks of today's world, calls all of us to the distortion of looks, maximizing perceptions, listens and smells, in an explosion of flavors, to the paradoxical experience in timeless and multi spatial dimensions. The diverse and plural coexist in a contradictory, complex and intriguing way. To talk/think about training processes, teaching and learning, in this context, it is necessary to capture and

  6. Embedded protostars in the dust, ice, and gas in time (DIGIT) <em>Herschel> key program

    Green, Joel D.; Evans II, Neal J.; Jørgensen, Jes Kristian

    2013-01-01

    We present 50-210 um spectral scans of 30 Class 0/I protostellar sources, obtained with Herschel-PACS, and 0.5-1000 um SEDs, as part of the Dust, Ice, and Gas in Time (DIGIT) Key Program. Some sources exhibit up to 75 H2O lines ranging in excitation energy from 100-2000 K, 12 transitions of OH, a...

  7. 47 CFR 95.201 - (R/C Rule 1) What is the Radio Control (R/C) Radio Service?

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false (R/C Rule 1) What is the Radio Control (R/C...) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO SERVICES Radio Control (R/C) Radio Service General Provisions § 95.201 (R/C Rule 1) What is the Radio Control (R/C) Radio Service? The R/C Service is a private...

  8. ANATOMIC-PATHOLOGICAL STUDY OF DIGITAL DERMATITIS WOUNDS IN CATTLE ESTUDO ANATOMOPATOLÓGICO DE LESÕES DE DERMATITE DIGITAL EM BOVINOS

    Camila França de Paula Orlando

    2008-12-01

    Full Text Available This essay had the scope of characterizing anatomic-pathological aspects of digital dermatitis wounds in distinct development phases. The essay was carried out from August 2004 and November 2005, using 40 cows distributed in four groups of ten animals each. Group I (GI consisted of clinically healthy animals, and groups II (GII, III (GIII and IV (GIV, consisted of animals bearing wounds in initial, erosive and proliferative phases, respectively. In GII histological observations were corneal stratus’ thickening, necrosis, hiperplasia, acanthosis, espongiosis and hyperqueratosis. In GIII it was observed hyperemia, ulcers, granulation tissue, hemorrhage and, microscopically, corneal layer thickening, paraqueratosis and multifocal necrosis. In GIV lesions of verrucous aspect, presence of fur, papillary projections were observed macroscopically, and, at histological examination, destruction of corneal layer and epidermis along with necrosis in all samples from the group.  Concerning the microbiota, fungi were not observed in any group. As for bacteria, mixed flora was observed, especially spirochetes, in GII, GIII e GIV. Finally, it was concluded that histological alterations in distinct phases of digital dermatitis may commonly be present, differing in terms of severity. The presence of spiral microorganisms suggests their association with etiopathogenesis.

    KEY WORDS: Cattle, digital lesions erosives and proliferatives, histopathology. Este trabalho objetivou caracterizar os aspectos anatomopatológicos das lesões de dermatite digital em diferentes fases evolutivas. O estudo ocorreu entre agosto de 2004 e novembro de 2005, utilizando-se quarenta vacas alocadas em quatro grupos, contendo dez animais cada. O grupo I (GI foi composto por animais clinicamente saudáveis e os grupos II (GII, III (GIII e IV (GIV, com lesões na fase inicial, erosiva e proliferativa, respectivamente. No GII, à histologia observaram-se espessamento do

  9. A biopolítica do corpo feminino em estratégias contemporâneas de ativismo digital

    Tarcisio Torres Silva

    2016-09-01

    Full Text Available Neste trabalho, observamos a utilização da imagem do corpo feminino como uma estratégia recorrente em ações ativistas em diferentes partes do mundo. Os elementos estéticopolíticos do corpo, historicamente utilizados pelas artes, tais como o nu, a dor, o erotismo e a identidade (ou o anonimato são reconduzidos para um projeto de cultura ativa e participativa dentro das redes de comunicação digital. Nossa análise insere-se no campo da biopolítica e faz uso de três exemplos recentes: os autorretratos da egípcia Aliaa Magda Elmahdy e as ações dos coletivos Pussy Riot (Rússia e Femen (Ucrânia

  10. Time Trails: patrimônio digital em presença no nosso dia a dia

    Gabriella Giannachi

    2014-01-01

    Full Text Available O projeto Time Trails é uma colaboração entre o Centre for Intermedia da University of Exeter, Royal Albert Memorial Museum and Art Gallery, 1010 Media e Exeter City Football Club Supporters Trust (2013. Trata-se de um aplicativo da web para dispositivos móveis que permite aos usuários seguir, comentar e criar roteiros usando texto, imagens e vídeos, respondendo via mídias sociais. São apresentados dois roteiros narrando a história do Exeter City Football Club e de seu Supporters Trust, que são usados para aprendizagem via celular e como parte de experiências em turismo esportivo e cultural. Mostramos como o Time Trails pode ser usado como uma ferramenta de presença para estabelecer novas maneiras de encontro e aprendizagem sobre patrimônio digital em nosso dia a dia.

  11. DIGITAL

    Federal Emergency Management Agency, Department of Homeland Security — The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk...

  12. Radiolabelling of RC-160: preliminary results

    Verdera, E.S.; Balter Binsky, H.S.; Robles, A.M.; Rodriguez, G.; Souto, B.; Laiz, J.; Oliver, P.; Leon, E.

    1998-01-01

    Vapreotide (RC-160) was labelled with 125 I using Chloramine-T and Iodogen methods and with 99m Tc by a direct method with sodium ditionite as reducing agent in the presence of ascorbic acid. Several methods of purification and quality control were evaluated. Yields of the reactions and of purification steps were calculated. The results obtained for the radioiodination reactions showed higher yields when limiting Chloramine-T method was used. Labelling of RC-160 with 99m Tc indicated better yields when high radioactivity concentration of the radionuclide was used. Stability of the products obtained was assessed at different post-labelling times by selected quality control methods: Sep-Pak cartridge as purification method and chromatography by RP-HPLC and ITLC-SG using saline solution as solvent. It was demonstrated that I-125-RC-160 and Tc-99m-RC-160 were stable during five weeks (at -20 deg. C) and 6 hours (at room temperature) respectively. Preliminary biodistribution of Tc-99m-RC-160 in normal rats and mice were done showing different biological behaviour compared with control animals injected with pertechnetate. In conclusion, RC-160 was successfully labelled with both radionuclides, with radiochemical purity higher than 95%. These results encourage further research work in animal models as well as to investigate the biochemical behaviour of radiolabelled peptide. (author)

  13. Fractional-order RC and RL circuits

    Radwan, Ahmed Gomaa

    2012-05-30

    This paper is a step forward to generalize the fundamentals of the conventional RC and RL circuits in fractional-order sense. The effect of fractional orders is the key factor for extra freedom, more flexibility, and novelty. The conditions for RC and RL circuits to act as pure imaginary impedances are derived, which are unrealizable in the conventional case. In addition, the sensitivity analyses of the magnitude and phase response with respect to all parameters showing the locations of these critical values are discussed. A qualitative revision for the fractional RC and RL circuits in the frequency domain is provided. Numerical and PSpice simulations are included to validate this study. © Springer Science+Business Media, LLC 2012.

  14. RC Circuits: Some Computer-Interfaced Experiments.

    Jolly, Pratibha; Verma, Mallika

    1994-01-01

    Describes a simple computer-interface experiment for recording the response of an RC network to an arbitrary input excitation. The setup is used to pose a variety of open-ended investigations in network modeling by varying the initial conditions, input signal waveform, and the circuit topology. (DDR)

  15. A abordagem cognitiva em pontos de inclusão digital em cidades da Bahia: marco teórico-metodológico Enfoque cognitivo en puntos de acceso a la inclusión digital en ciudades de Bahía: conceptos y método Cognitive Approach in the Digital Inclusion Point in Bahia's Towns: methodologic Theoretical Framework

    Barbara Coelho Neves

    2009-12-01

    Full Text Available A presente comunicação visa relatar alguns progressos da pesquisa interessada em compreender o processo de mediação desenvolvido pelos pontos de inclusão digital (PIDs em cidades do estado da Bahia (Brasil. O objetivo é verificar se os modelos de acesso desenvolvidos nos PIDs, considerados como os de maior inclusão digital, favorecem a convergência de recursos (físicos, digitais, humanos e sociais. O marco teórico utilizado na investigação é apresentado, descrevendo os conceitos de tecnologia e de mediação pautada na cognição para contextualizar o objeto, centrando na compreensão da convergência de recursos cognitivos. A metodologia é descritiva, estando em desenvolvimento em 10 cidades.La presente comunicación detalla algunos de los avances de la investigación dedicada a comprender el proceso de mediación desarrollado por los puntos de inclusión digital (PIDs en ciudades del estado de Bahía (Brasil. El objetivo es verificar si los modelos de acceso desarrollados en los PIDs, considerados como los de mayor inclusión digital, favorecen la convergencia de recursos (físicos, digitales, humanos y sociales. Se presenta el marco teórico utilizado en la investigación para describir los conceptos de tecnología y de mediación pautada en la cognición, con el propósito de contextualizar el objeto, se enfoca en la comprensión de la convergencia de recursos cognitivos. El método es descriptivo, y se está aplicando en 10 ciudades.This work shows the progress of the research that intended to understand the mediation process developed by the access points of digital inclusion (PIDs in Bahia's towns (Brazil. It describes the first steps of the research, but progress is being made in concepts that allow us to understand the mediation process, focusing on the convergence of cognitive resources. The general purpose is to verify that the access models developed in Bahia's PIDs, which are considered of greater digital inclusion

  16. Netnografia como aporte metodológico da pesquisa em comunicação digital

    Amaral, Adriana

    2008-01-01

    Full Text Available Ao definir o papel da netnografia como uma metodologia para estudos na Internet (HINE, 2000 e como um método interpretativo e investigativo para o comportamento cultural e de comunidades on-line (KOZINETS, 1997, o próprio método se traduz como objeto de estudo no presente artigo. Abordamos aqui alguns exemplos de uso do método nos estudos em comunicação mediada pelo computador, assim como uma breve problematização sobre o papel do pesquisador nesse contexto

  17. 47 CFR 95.221 - (R/C Rule 21) How do I have my R/C transmitter serviced?

    2010-10-01

    ... FCC certificated R/C transmitter (see R/C Rule 9) must be made in accord with the Technical... in order to: (1) Adjust a transmitter to an antenna; (2) Detect or measure radiation of energy other...

  18. Fractional RC and LC Electrical Circuits

    Gómez-Aguilar José Francisco

    2014-04-01

    Full Text Available In this paper we propose a fractional differential equation for the electrical RC and LC circuit in terms of the fractional time derivatives of the Caputo type. The order of the derivative being considered is 0 < ɣ ≤1. To keep the dimensionality of the physical parameters R, L, C the new parameter σ is introduced. This parameter characterizes the existence of fractional structures in the system. A relation between the fractional order time derivative ɣ and the new parameter σ is found. The numeric Laplace transform method was used for the simulation of the equations results. The results show that the fractional differential equations generalize the behavior of the charge, voltage and current depending of the values of ɣ. The classical cases are recovered by taking the limit when ɣ = 1. An analysis in the frequency domain of an RC circuit shows the application and use of fractional order differential equations.

  19. Fatigue behavior of RC T-beams

    Omar A. Farghal

    2014-09-01

    Full Text Available The objective of this research is to study the fatigue performance of reinforced concrete (RC T-beams strengthened in shear with Carbon Fiber Reinforced Polymer (CFRP composite. Experiments were conducted on RC beams with and without CFRP sheets bonded on their web surfaces and subjected to static and cycling loading. The obtained results showed that the strengthened beams could survive one million cycles of cyclic loading (=50% of maximum static load with no apparent signs of damage (premature failure demonstrating the effectiveness of CFRP strengthening system on extending the fatigue life of structures. Also, for beams having the same geometry, the applied strengthening technique can significantly enhance the cycling load particularly, in case of beams provided with U-jacket sheets. Moreover, although the failure mode for the different beams was a brittle one, the strengthened beams provided with U-jacket sheets approved an acceptable enhancement in the structural ductility.

  20. DISTRIBUTED RC NETWORKS WITH RATIONAL TRANSFER FUNCTIONS,

    A distributed RC circuit analogous to a continuously tapped transmission line can be made to have a rational short-circuit transfer admittance and...one rational shortcircuit driving-point admittance. A subcircuit of the same structure has a rational open circuit transfer impedance and one rational ...open circuit driving-point impedance. Hence, rational transfer functions may be obtained while considering either generator impedance or load

  1. WE-A-17A-03: Catheter Digitization in High-Dose-Rate Brachytherapy with the Assistance of An Electromagnetic (EM) Tracking System

    Damato, AL; Bhagwat, MS; Buzurovic, I; Devlin, PM; Friesen, S; Hansen, JL; Kapur, T; Lee, LJ; Mehrtash, A; Nguyen, PL; O' Farrell, D; Wang, W; Viswanathan, AN; Cormack, RA [Brigham and Women' s Hospital, Boston, MA (United States)

    2014-06-15

    Purpose: To investigate the use of a system using EM tracking, postprocessing and error-detection algorithms for measuring brachytherapy catheter locations and for detecting errors and resolving uncertainties in treatment-planning catheter digitization. Methods: An EM tracker was used to localize 13 catheters in a clinical surface applicator (A) and 15 catheters inserted into a phantom (B). Two pairs of catheters in (B) crossed paths at a distance <2 mm, producing an undistinguishable catheter artifact in that location. EM data was post-processed for noise reduction and reformatted to provide the dwell location configuration. CT-based digitization was automatically extracted from the brachytherapy plan DICOM files (CT). EM dwell digitization error was characterized in terms of the average and maximum distance between corresponding EM and CT dwells per catheter. The error detection rate (detected errors / all errors) was calculated for 3 types of errors: swap of two catheter numbers; incorrect catheter number identification superior to the closest position between two catheters (mix); and catheter-tip shift. Results: The averages ± 1 standard deviation of the average and maximum registration error per catheter were 1.9±0.7 mm and 3.0±1.1 mm for (A) and 1.6±0.6 mm and 2.7±0.8 mm for (B). The error detection rate was 100% (A and B) for swap errors, mix errors, and shift >4.5 mm (A) and >5.5 mm (B); errors were detected for shifts on average >2.0 mm (A) and >2.4 mm (B). Both mix errors associated with undistinguishable catheter artifacts were detected and at least one of the involved catheters was identified. Conclusion: We demonstrated the use of an EM tracking system for localization of brachytherapy catheters, detection of digitization errors and resolution of undistinguishable catheter artifacts. Automatic digitization may be possible with a registration between the imaging and the EM frame of reference. Research funded by the Kaye Family Award 2012.

  2. Informações georreferenciadas no suporte a decisão em arqueologia brasileira: proposta para uma carta arqueológica digital.

    André Argollo de Aguiar

    2012-01-01

    O desenvolvimento do projeto consistiu na modelagem da informação para gestão em arqueologia numa base de dados convergente de informação, caracterizada por um ambiente cartográfico digital, integrando mapas temáticos e base de dados alfanumérica num modelo protótipo e interativo para ajudar a integrar as informações na gestão em arqueologia, permitindo o registro, armazenamento e visualização da informação arqueológica correlacionada a mapas temáticos. The project development consisted of...

  3. Laços de amizade : modos de relacionamento jovem em tempos de conectividade digital

    Suzana Feldens Schwertner

    2010-01-01

    Como pensar as alterações sobre as formas pelas quais precisamente hoje, em uma era de conectividades digitais, se estabelecem as relações de amizade? Como contribuir para avançar o pensamento sobre a temática, dada a importância do tema da amizade para a educação, ou seja, na qualidade de espaço político e social, de responsabilidade ética pelo outro? Várias perguntas são formuladas a partir da presente investigação, que passa par questionar a metáfora familiar como modelo das relações de am...

  4. Simplified unified analysis of switched-RC passive mixers, samplers, and N -Path filters using the adjoint network

    Pavan, Shanthi; Klumperink, Eric A.M.

    2017-01-01

    Recent innovations in software defined CMOS radio transceiver architectures heavily rely on high linearity switched-RC sampler and passive-mixer circuits, driven by digitally programmable multiphase clocks. Although seemingly simple, the frequency domain analysis of these linear periodically time

  5. Desenvolvimento de uma plataforma de software para a modelagem digital de terrenos baseada em TIN

    F. F. Oliveira

    Full Text Available Superfícies topográficas podem ser representadas com um bom grau de precisão por meio de mapas. No entanto, estes nem sempre são as melhores ferramentas para a compreensão de relevos mais complexos. Nesse sentido, a maior contribuição desse trabalho é a especificação e implementação da arquitetura de uma plataforma de software opensource voltado para a representação de modelos digitais de terrenos baseado em TIN (Triangular Irregular Network, segundo os paradigmas da programação orientada a objetos e programação genérica e que possibilitaram a integração de várias ferramentas de linguagem aberta (opensource, tais como GDAL, OGR, OpenGL, OpenSceneGraph e Qt. Além disso, o núcleo de representação da arquitetura tem a capacidade de trabalhar com múltiplas estruturas de dados topológicas que permitem extrair em tempo constante, todas as relações de conectividade entre as entidades vértices, arestas e faces, presentes numa subdivisão planar triangular, facilitando enormemente a implementação de aplicações de tempo real. Esta capacidade é muito importante, por exemplo, na utilização de dados de levantamentos a laser (Lidar, ALS, TLS, possibilitando a geração de modelos de malhas triangulares da ordem de milhões de pontos.

  6. Caderno de campo digital: antropologia em novas mídias

    Luiz Eduardo Robinson Achutti

    2004-06-01

    Full Text Available A pesquisa apresenta uma experiência de etnografia e fotoetnografia com equipamento digital. Busca registrar as transformações por que passa uma comunidade rural e pesqueira pertencente a Viamão, na Grande Porto Alegre, RS, Brasil. Margeada pelo rio Guaíba (na verdade, lago e pela lagoa dos Patos (na verdade, laguna, com a chegada do asfalto no ano de 2002 e a abertura à visitação de parque de reserva ambiental, a vila, chamada Vila de Itapuã, passou a atrair visitantes e a romper com o isolamento. Tal isolamento foi determinante para que na década de 1940 no local fosse construído o Hospital Colônia, uma prisão-tratamento para leprosos. A pesquisa busca registrar a cultura açoriana ali remanescente e, sobretudo, pensar o moderno que penetra o tradicional e todas as implicações desse entrelaçamento na construção de uma identidade local. Paralelamente à modernização que alcança o campo da investigação, a pesquisa também traz inovações metodológicas, ao testar e ampliar o uso da fotografia digital como um recurso para a fotoetnografia, discutir os seus recursos e limites e também os recursos da Internet, uma vez que o caderno de campo é publicado sistematicamente no site www.ufrgs.br/fotoetnografia, no ar desde o mês de julho de 2003.This research presents an ethnographic and photoethnographic experiment with digital equipment. The research aims to register the transformations through which a rural fishing community is going through, in Viam��o, in the vicinities of Porto Alegre, RS, Brazil. The Vila, called Vila de Itapuã, is surrounded by the Guaíba river on one side and by the Patos lagoon on the other; in the year 2002 the paths to the Vila were asphalted and a wild life reserve park was opened, inviting visitors to end this Vila's isolation. The former isolation of the place was a fundamental reason for the establishment, in the 1940's, of the Colony Hospital, a prison-leprosarium. The present research

  7. ELASTO-PLASTIC BEHAVIOR OF RC FRAMES COMPOSED OF STEEL JACKETTED RC SHORT COLUMNS AND SPANDREL WALLS

    Nasruddin

    2012-01-01

    This experimental study is a part of the investigation on the seismic design method for Double Tubes Hybrid System (DTHS) for buildings. This structural system consists of RC core walls as the interior tube, and the exterior frames composed of RC short columns and RC spandrel walls as the exterior tube. The RC core walls are designed as the Energy Dissipation Structural Walls (EDSW), which are composed of RC coupled shear walls linked by short steel H-shaped beams as the energy dissipation de...

  8. Epistemologia social e cultura digital: reflexões em torno das formas de escritas na web

    Regina Maria Marteleto

    2015-12-01

    Full Text Available O artigo apresenta alguns eixos teóricos e metodológicos a fim de refletir sobre a produção, mediação e apropriação de conhecimentos e a configuração de dispositivos de informação e comunicação na web, no contexto de uma ‘cultura digital’. Para tanto recupera a ideia de epistemologia social, cunhada por dois fundadores do campo de estudos da informação, J. Shera e M. Egan, atualizada por autores das áreaa da informação e da filosofia, com o propósito de refletir sobre como as formas epistêmicas estão relacionadas às práticas sociais e institucionais. Considerou-se esse um caminho promissor para explorar e compreender os modos de ser dos espaços digitais e suas mídias. Por fim, exploram-se alguns estudos da linha francesa das Ciências da Informação e Comunicação, mais especificamente os conceitos, de dispositivo infocomunicacional; cultura digital; texto; hipertexto e arquitexto, a fim de refletir sobre as formas estruturais das escritas e leituras na web. Se a epistemologia social orienta um programa de estudos sobre as questões de acesso, produção e apropriação de conhecimentos, as pesquisas sobre as formas de escrita indica caminhos teórico-práticos para entender e praticas as escritas na web.

  9. FRP strengthening of RC walls with openings

    Hansen, Christian Skodborg; Sas, Gabriel; Täljsten, Björn

    2009-01-01

    Strengthening reinforced concrete (RC) walls with openings using fibre reinforced polymers (FRP) has been experimentally proven to be a viable rehabilitation method. However, very few theoretical investigations are reported. In this paper two methods of analysis are presented. Since openings vary...... in size, the analysis of a strengthened wall can be divided into frame idealization method for large openings, and combined disk and frame analysis for smaller openings. The first method provides an easy to use tool in practical engineering, where the latter describes the principles of a ductile...

  10. Videografia digital na estimativa de carbono em florestas implantadas com espécies nativas / Estimation of carbon in forests established with native species using digital videography

    Hilton Thadeu Zarate do Couto

    2008-09-01

    Full Text Available O objetivo do presente trabalho é utilizar a videografi a digital como ferramenta para a estimativa do carbono em fl orestas implantadas com essências nativas, utilizando para isso o índice de vegetação NDVI. As imagens aéreas foram obtidas com o auxílio de uma aeronave modelo Cessna 180, equipada com o sistema de rastreamento e armazenamento de dados, que inclui uma câmera digital multiespectral de alta resolução.A partir das imagens geradas pelo sistema foi analisado o índice devegetação ou NDVI do mosaico formado e a idade, em anos, dos plantiosestudados, correlacionando os valores do índice e da idade com dados de biomassa total, biomassa do tronco (DAP maior que 5cm carbono e CO2-equivalente obtidos a partir de medições de DAP realizadas em parcelas permanentes instaladas nas áreas fl orestais inventariadas. Os modelos obtidos foram gerados utilizando-se da análise de regressão linear múltipla. Os resultados obtidos apresentaram coefi cientes dedeterminação (R² e nível de significância adequado para os modelos que relacionam o NDVI e a idade com as variáveis de biomassa e carbono nas florestas, mostrando que a videografia digital pode ser uma importante ferramenta na análise e estimativa de biomassa e carbono em florestas implantadas com essências nativas.

  11. Avaliação de modelos digitais de elevação para aplicação em um mapeamento digital de solos Evaluation of digital elevation models for application in a digital soil mapping

    César S. Chagas

    2010-02-01

    Full Text Available No Brasil, normalmente os modelos digitais de elevação (MDEs são produzidos pelos próprios usuários e pouca atenção tem sido dada às suas limitações, como fonte de informação espacial. Este estudo propôs avaliar diferentes MDEs para subsidiar a escolha do modelo apropriado para derivar atributos topográficos utilizados em um mapeamento digital de solos, por redes neurais artificiais. A avaliação constou da determinação da raiz quadrada do erro médio quadrático da elevação (RMSE; análise das depressões espúrias; comparação entre drenagem mapeada e drenagem numérica, curvas de nível derivadas e curvas de nível originais, e análise das bacias de contribuição derivadas. Os resultados obtidos demonstraram que apenas o RMSE não foi suficiente para avaliar a qualidade desses modelos. O MDE, derivado de curvas de nível (CARTA, obtido com a utilização do módulo TOPOGRID apresentou qualidade superior aos MDEs derivados de sensores remotos (ASTER e SRTM. A análise qualitativa também identificou que o MDE CARTA é superior aos demais, pois estes apresentaram grande quantidade de erros que podem comprometer o estabelecimento das relações entre atributos do terreno e as condições locais de solos.In Brazil, the digital elevation models (DEMs are usually produced by users themselves and little attention has been given to their limitations as source of spatial information. The objective of this study was to evaluate different DEMs to help in choosing an appropriate model to derive topographical attributes used in a digital soil mapping based on a neural networks approach. The evaluation consisted of the following analysis: determination of root mean square error (RMSE of elevation; analysis of the spurious depressions; comparison between mapped drainage and numeric drainage and between derived contour lines and original contour lines; and analysis of the derived contribution basins. The results demonstrated that RMSE

  12. ECE diagnostics for RTO/RC ITER

    Vayakis, G.; Bartlett, D.V.; Costley, A.E.

    2001-01-01

    This paper presents the current status of the Electron Cyclotron Emission (ECE) diagnostic on the Reduced Technical Objectives/Reduced Cost International Thermonuclear Experimental Reactor (RTO/RC ITER). It discusses the implications of the new machine design on the measurement requirements, the ability of the diagnostic technique to meet these, and the changes in the implementation imposed by the new layout. Finally, it outlines the physics studies, design and R and D work required prior to the detailed design and construction of the diagnostic. Key results are: (i) that the localisation of the measurement is similar to that in ITER-FDR (40-100 mm in X-mode, 60-200 mm in O-mode for the reference scenario), so that the relative spatial resolution degrades in this, smaller, machine, and (ii) the expected effect of transport barriers on the temperature profile in the high temperature region will be poorly resolved, because the effect of the temperature gradient on the outboard side is to degrade the resolution to (∼250 mm in X-mode, ∼350 mm in O-mode). Nevertheless ECE will be able to make a unique and useful contribution to the RTO/RC ITER measurement set

  13. Reliability of a digital image method for measuring medial mandibular flexure in dentate subjects Confiabilidade de um método de imagem digital para medição de deflexão mandibular medial em adultos dentados

    Rosemary Sadami Arai Shinkai

    2004-12-01

    Full Text Available Medial mandibular flexure (MMF is the functional approximation of hemi-mandibles in jaw opening and protrusion, which may affect conventional or implant-supported arch prostheses. OBJECTIVE: This study evaluated the intra- and inter-rater reliability of a digital image method for linear measurement of MMF in dentate subjects. MATERIAL AND METHODS: Mandibular occlusal impressions in vinyl polysiloxane during rest and maximum opening were obtained from seven adult volunteers. Each impression and the Mitutoyo digital calipers with a 10mm opening were scanned at a 200% magnification. The images were processed using Adobe Photoshop software to get reference points on contralateral first molars. Linear intermolar measurements were taken using the Image Tool software (UTHSCSA, which was calibrated with the standard opening of the digital calipers. Intermolar distance was measured in triplicate for each image by two independent examiners. MMF was calculated by subtracting the intermolar distance in maximum opening (or protrusion from the distance in rest position. Data were analyzed by intraclass correlation (ICC tests for estimating intra- and inter-rater reliability. RESULTS: MMF values ranged from -0.21 to 0.44mm. Intra-rater ICCs were 0.982 and 0.993, and inter-rater ICC was 0.696. CONCLUSION: The present results show excellent intra-rater and good inter-rater reliability of this digital image method for measuring MMF in dentate subjects.A deflexão mandibular medial (MMF é uma deformação funcional que ocorre com a aproximação das hemi-mandíbulas em abertura e protrusão, podendo afetar próteses convencionais e implanto-suportadas em arco. OBJETIVOS: Este trabalho avaliou a confiabilidade intra- e inter-examinador de um método de imagem digital para aferição linear da MMF. MATERIAL E MÉTODOS: Foram selecionados sete voluntários adultos dentados, obtendo-se registros oclusais inferiores de silicona de adição em repouso, abertura e

  14. Explanatory digital video disc with patients undergoing diagnostic cardiac catheterization Disco digital explicativo para pacientes sometidos al cateterismo cardiaco diagnóstico Digital video disc explicativo em pacientes submetidos ao cateterismo cardíaco diagnóstico

    Sabrina Koehler Torrano

    2011-08-01

    ámico.O objetivo deste estudo foi avaliar o conhecimento dos pacientes pré-cateterismo cardíaco com diagnóstico ambulatorial, após digital video disc explicativo, em um hospital de referência em cardiologia. Usou-se o estudo transversal como metodologia, com pacientes submetidos ao primeiro cateterismo cardíaco, realizado de maio a junho de 2009, no setor de hemodinâmica. Foi utilizado instrumento com questões (12 referentes ao entendimento dos pacientes sobre o procedimento. A intervenção foi um vídeo com duração de cinco minutos, elaborado pelos pesquisadores. A amostra foi constituída por 94 pacientes, divididos em grupo intervenção-GI (45 e grupo controle-GC (49, com idade média de 55±9 anos e predominância do sexo masculino. Pacientes do GI apresentaram maior índice de acertos (74,6±17,1, quando comparados ao GC (31,6±18,8, p=0,000. Pode-se concluir, por meio dos resultados, que houve eficácia da apresentação de um vídeo de orientações para pacientes submetidos ao procedimento hemodinâmico.

  15. Structural Test and Analysis of RC Slab After Fire Loading

    Chung, Chulhun; Im, Cho Rong; Park, Jaegyun

    2013-01-01

    In the present study the behavior of fire and the residual strength of fire-ignited RC slabs are investigated by experimental tests and numerical simulations. The fire tests of RC slabs were carried out in a furnace using the ISO 834 standard fire. The load capacity of the cooled RC slabs that were not loaded during the fire tests was evaluated by additional 3 point bending tests. The influence of the proportion of PP (polypropylene) fibers in the RC slabs on the structural behavior of the RC slabs after the fire loading was investigated. The results of the fire tests showed that the maximum temperature of concrete with PP fiber was lower than that of concrete without PP fiber. As the concrete was heated, the ultimate compressive strength decreased and the ultimate strain increased. The load-deflection relations of RC slabs after fire loading were compared by using existing stress-strain-temperature models. The comparison between the numerical analysis and the experimental tests showed that some numerical analyses were reliable and therefore, can be applied to evaluate the ultimate load of RC slabs after fire loading. The ultimate load capacity after cooling down the RC slabs without PP fiber showed a considerable reduction from that of the RC slabs with PP fiber

  16. Structural Test and Analysis of RC Slab After Fire Loading

    Chung, Chulhun; Im, Cho Rong; Park, Jaegyun [Dankook Univ., Yongin (Korea, Republic of)

    2013-04-15

    In the present study the behavior of fire and the residual strength of fire-ignited RC slabs are investigated by experimental tests and numerical simulations. The fire tests of RC slabs were carried out in a furnace using the ISO 834 standard fire. The load capacity of the cooled RC slabs that were not loaded during the fire tests was evaluated by additional 3 point bending tests. The influence of the proportion of PP (polypropylene) fibers in the RC slabs on the structural behavior of the RC slabs after the fire loading was investigated. The results of the fire tests showed that the maximum temperature of concrete with PP fiber was lower than that of concrete without PP fiber. As the concrete was heated, the ultimate compressive strength decreased and the ultimate strain increased. The load-deflection relations of RC slabs after fire loading were compared by using existing stress-strain-temperature models. The comparison between the numerical analysis and the experimental tests showed that some numerical analyses were reliable and therefore, can be applied to evaluate the ultimate load of RC slabs after fire loading. The ultimate load capacity after cooling down the RC slabs without PP fiber showed a considerable reduction from that of the RC slabs with PP fiber.

  17. Serviço de apoio a distância ao professor em sala de aula pela tv digital interativa

    José Manuel Martin Rios

    2004-01-01

    Full Text Available Este é um artigo de um projeto em andamento desenvolvido em parceria com a Diretoria Técnica de Serviços do CPqD Telecom & IT Solutions e a Faculdade de Educação da UNICAMP, que objetiva estabelecer um serviço de apoio a distância aos professores em sala de aula em 03 Escolas da região de Barão Geraldo em Campinas/ SP , para utilizar a TV Digital Interativa como ferramenta de busca e desenvolvimento de conteúdo multimídia interativo nas práticas pedagógicas. Fundamentalmente esta ferramenta será de fácil uso por utilizar como terminal de escolha e exibição um televisor colocado nas salas de aula das escolas e controlado por controle remoto. O professor poderá interagir com o conteúdo exibido no televisor de modo a obter uma programação não linear que se desenvolverá conforme o seu projeto pedagógico. As principais características do serviço são a facilidade de uso, fornecimento a distância de material multimídia interativo, baixo custo de implantação e grande área geográfica de cobertura, proporcionada pela disponibilidade quase total de sinal de televisão no território nacional. Este serviço é parte de um conjunto de serviços de teleducação que estão sendo desenvolvidos para o futuro Sistema de TV Digital terrestre que será implantado no Brasil.

  18. QUESTÕES CULTURAIS E IDENTITÁRIAS EM AMBIENTE DIGITAL: UMA PROPOSTA DE MATERIAL DIDÁTICO PARA O CURSO DE ESPANHOL NA PLATAFORMA EDMODO

    Tarsila Rubin Battistella

    2016-12-01

    Full Text Available Este artigo tem por objetivo abordar uma proposta de material didático para um curso de Espanhol, de nível universitário, na plataforma virtual de ensino Edmodo, compreendendo a questão identitária e cultural na formação do falante de língua estrangeira. Para tanto, são abordados os conceitos de aprendizado em ambiente digital, incluindo as novas formas de letramento, as estratégias de aprendizagem e o ensino de língua estrangeira com base nos PCNs e no Referencial Curricular do estado do Rio Grande do Sul. As atividades digitais são propostas e analisadas com base nos PCNs e nas estratégias de Oxford. Por meio da análise, nós consideramos que as atividades em ambiente digital possibilitam a interação, a formação identitária, a colaboração entre aprendizes e o professor na construção compartilhada do conhecimento em língua estrangeira.

  19. Estágio em marketing digital na empresa BPHL - Assessoria Informática e de Gestão

    Pais, Sandra Sofia Ferreira

    2018-01-01

    Mestrado em Gestão das Organizações : Ramo de Gestão de Empresas (parceria com a APNOR) na Escola Superior de Tecnologia e Gestão do Instituto Politécnico de Viana do Castelo O presente relatório tem como intuito relatar as várias atividades de marketing digital realizadas no decorrer do estágio curricular, durante os meses de outubro 2015 e março 2016, na empresa BPHL – Assessoria Informática e de Gestão, no âmbito do Mestrado em Gestão das Organizações no ramo da Gestão de Empresas. O...

  20. O registro de si e do outro: práticas de leitura e de escrita de estudantes em ambiente digital

    Adriana Barroso de Azevedo

    2015-07-01

    Full Text Available http://dx.doi.org/10.5007/1807-9288.2015v11n1p369 O presente artigo é um recorte da Dissertação de Mestrado intitulada “Ensino Médio, Língua Portuguesa e Portal Educacional: percepções emergentes das narrativas de alunos inseridos em práticas de letramento digital” (PERICO, 2015 na qual foi abordada a importância das Tecnologias Digitais de Informação e Comunicação (TDIC no atual contexto educacional. A metodologia adotada foi a pesquisa qualitativa de cunho investigativo, na modalidade narrativa. A apuração dos dados resultou em oito categorias de análise, sendo selecionada para este artigo aquela que analisa a produção de alunos em ambiente digital. Os resultados obtidos apontaram para uma efetiva preocupação com a escrita em norma culta, por parte dos estudantes inseridos no processo, ao terem seus textos lidos, analisados e debatidos por outros colegas.

  1. Linear density analysis of bone repair in rats using digital direct radiograph Análise de densidade linear para reparo ósseo em ratos utilizando radiografia digital direta

    Ricardo de Oliveira Bozzo

    2004-12-01

    Full Text Available The objective of this study was to assess bone density measurements for analysis of repairing fractures in rats using direct digital radiography under Dexamethasone effects. Thirty (30 young adult male Wistar rats were used, with an average weight of 200g, which were submitted to general anesthetics by ethyl ether. One rib of each animal was fractured by surgical technique. The rats were divided into 2 groups, named Control group - intraperitoneal administration of saline solution 1 hour prior to operation, and Group 1: intraperitoneal administration of Dexamethasone 0.1mg/Kg of weight 1 hour prior to operation, and two postoperative doses every 12 hours. The animals were sacrificed at 2, 3, 4, 7 and 14 days. The parts containing the hemi-thorax with the fractured rib were removed and submitted to direct digital radiography, where the linear density of the two extremities of the fracture were analyzed by the Digora System. The results showed that in the control group and in Group 1 there was a gradual and significant increase in linear density. The method used made it feasible to supply data that were statistically significant in assessing the gain in bone density during the period of time analyzed. In conclusion, direct digital radiograph is useful for bone density analysis for fracture repairing. The dose of Dexamethasone was not sufficient to alter the gain in bone density at the extremities of fracture.O objetivo deste estudo foi analisar densidade linear utilizando o sistema de radiografia digital direta intrabucal para verificar o ganho de densidade óssea em fraturas de ratos sob os efeitos da Dexametasona. Trinta (30 ratos Wistar machos, adultos jóvens de 200 g em média foram usados. Os animais foram submetidos á anestesia geral por inalação de éter etílico e 01 costela de cada animal foi fraturada através de técnica cirúrgica. Os ratos foram divididos em grupos de 03 repetições para cada grupo em cada período de tempo

  2. Empreendedorismo Digital. Estudo do Projeto Negócios Digitais Realizado pelo Sebrae-PR em Maringá

    Jaiane Aparecida Pereira

    2016-01-01

    Full Text Available Doing business in digital form has become popular across the telecommunications infrastructurecheapening and this competitiveness environment becomes increasingly difficult. In order to supportthe micro and small entrepreneurs in the process, Sebrae Paraná conceived the Digital Business Project, which was operated later by municipal units, as Sebrae Maringá. Thus, the aim of thisstudy is to understand how the Digital Business Project developed by Sebrae Maringa support inthe development of digital entrepreneurship in micro and small enterprises. For this, we made aqualitative research through semi-structured interviews with project managers and monitoring ofthree companies that participated. We also made a quantitative descriptive research to characterizethe participating profile. Therefore, the results show that the participant’s motivations was related toseeking knowledge about tools and strategies used in the digital environment, but lack of time andfinancial resources hinder this process. In addition, we indicate the importance of initiatives such asProject and suggestions for improve it.

  3. Vapreotide: BMY 41606, RC 160, Sanvar.

    2003-01-01

    Vapreotide [Octastatin, Sanvar, RC 160, BMY 41606] is a somatostatin analogue developed at Tulane University School of Medicine, New Orleans, USA, which holds patent rights for vapreotide. Vapreotide provides a much higher metabolic stability than its parent compound. Vapreotide was licensed to Debiopharm for development in Europe. Vapreotide is usually administered SC although a slow-release IM formulation is also available. Other sustained-release formulations are under development. H3 Pharma plans to sign agreements for all indications in the core markets of North America, Europe and in non-core geographic regions during 2003. H3 Pharma will also seek to obtain registration and early market entry in non-core countries with help from partners. Sanvar Immediate Release (IR) has been submitted for approval within the European Union for the treatment of acute oesophageal variceal bleeding (EVB). Sanvar IR has been awarded orphan drug status in the US for EVB. In July 2003, H3 Pharma received written confirmation from the US FDA that the dossier for Sanvar is fileable for registration in the United States for the treatment of esophageal variceal bleeding (EVB). The Sanvar IR (immediate-release) formulation is expected to enter the US market by late 2004. H3 Pharma expects to file for Latin American registration for this indication in the second half of 2003, with registrations in other regions to follow. Sanvar SR has been submitted for Orphan Drug designation.

  4. Seismic Performance of Precast Polystyrene RC Walls

    Wibowo Ari

    2017-01-01

    Full Text Available Precast concrete structure such as precast wall is a concept that is growing rapidly these days. However, the earthquake resistance is believed to be one of its drawbacks. Additionally, the large weight of solid elements also increase the building weight significantly which consequently increase the earthquake base shear force as well. Therefore, investigation on the seismic performance of precast concrete wall has been carried out. Three RC wall specimens using wire mesh reinforcement and EPS (Extended Polystyrene System panel have been tested. This wall was designed as a structural wall that was capable in sustaining lateral loads (in-plane yet were lightweight to reduce the total weight of the building. Parameter observed was the ratio of height to width (aspect ratio of wall of 1.0, 1.5 and 2.0 respectively with the aim to study the behaviour of brittle to ductile transition of the wall. Incremental static load tests were conducted until reaching peak load and then followed by displacement control until failure. Several data were measured at every stage of loading comprising lateral load-displacement behaviour, ultimate strength and collapse mechanism. The outcomes showed that precast concrete walls with a steel wire and EPS panel filler provided considerably good resistance against lateral load.

  5. The Second ICASE/LaRC Industry Roundtable: Session Proceedings

    Girimaji, Sharath

    1997-01-01

    The second ICASE/LaRC Industry Roundtable was held October 7-9, 1996 at the Williamsburg Hospitality House, Williamsburg, Virginia. Like the first roundtable in 1994, this meeting had two objectives: (1) to expose ICASE and LaRC scientists to industrial research agendas; and (2) to acquaint industry with the capabilities and technology available at ICASE, LaRC and academic partners of ICASE. Nineteen sessions were held in three parallel tracks. Of the 170 participants, over one third were affiliated with various industries. Proceedings from the different sessions are summarized in this report.

  6. Study of optimization in CR and DR digital mammography systems; Estudo da otimização em sistemas de mamografia digital CR e DR

    Perez, Alessandra M.M.M.; Poletti, Martin E. [Universidade de Sao Paulo (USP), Ribeirão Preto, SP (Brazil). Departamento de Física; Tomal, Alessandra [Universidade de Campinas (UNICAMP), Campinas, SP (Brazil). Instituto de Física Gleb Wataghin; Correia, Paula D. [MP Radioproteção, Uberlândia, MG (Brazil); Paciência, Renato D. [BrasilRad, Florianópolis, SC (Brazil); Silva, Marcia C. [Hospital Israelita Albert Einstein, São Paulo, SP (Brazil)

    2017-07-01

    The advance of digital mammography in Brazil require revisiting optimization conditions. This work aimed to determine optimized radiographic technique for two detection systems (Computerized Radiography and Digital Radiography) in use in three mammography units: Mammomat 3000 Nova (Siemens), Senographe DMR (GE) and Senographe 2000D (GE). Optimization was conducted for different technique factors and breast phantom configurations, such as tube voltage settings (26 to 32 kV), target and filter combinations (Mo/Mo, Mo/Rh and Rh/Rh) and breast equivalent material in various thicknesses (2 to 8 cm), using a figure of merit (FOM) as a parameter. The target and filter combinations that provided the highest FOM values were Mo/Rh for Siemens equipment and Rh/Rh for both GE equipment, corresponding to the higher energy spectra in each unity. It was also observed an increasing tendency of tube voltage which maximizes FOM with the increase of thickness. (author)

  7. Comparison of the automated evaluation of phantom mama in digital and digitalized images; Comparacao da avaliacao automatizada do phantom mama em imagens digitais e digitalizadas

    Santana, Priscila do Carmo, E-mail: pcs@cdtn.b [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Engenharia Nuclear. Programa de Pos-Graduacao em Ciencias e Tecnicas Nucleares; Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Fac. de Medicina. Dept. de Propedeutica Complementar; Gomes, Danielle Soares; Oliveira, Marcio Alves; Nogueira, Maria do Socorro, E-mail: mnogue@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2011-07-01

    Mammography is an essential tool for diagnosis and early detection of breast cancer if it is provided as a very good quality service. The process of evaluating the quality of radiographic images in general, and mammography in particular, can be much more accurate, practical and fast with the help of computer analysis tools. This work compare the automated methodology for the evaluation of scanned digital images the phantom mama. By applied the DIP method techniques was possible determine geometrical and radiometric images evaluated. The evaluated parameters include circular details of low contrast, contrast ratio, spatial resolution, tumor masses, optical density and background in Phantom Mama scanned and digitized images. The both results of images were evaluated. Through this comparison was possible to demonstrate that this automated methodology is presented as a promising alternative for the reduction or elimination of subjectivity in both types of images, but the Phantom Mama present insufficient parameters for spatial resolution evaluation. (author)

  8. Inclusão dos idosos no meio digital com educação em saúde: projeto piloto

    Samir Antonio Rodrigues Abjaude

    2013-09-01

    Full Text Available http://dx.doi.org/10.5007/1807-0221.2013v10n15p129 O Brasil esta passando por uma modificação na faixa etária populacional com o aumento do número de idosos, sendo que estes possuem tendência de perdas cognitivas de memória e maior uso de medicamentos. Objetivo: Assim o projeto UNAFAL teve como proposta o desenvolvimento de ações educativas em saúde na inclusão digital para formar idosos mais esclarecidos quanto ao uso racional de medicamentos e com acesso a informação em saúde. Além disso, formar o acadêmico para orientação farmacêutica e educação em saúde. Método: Produção de setes materiais educativos para trabalhar juntamente com ferramentas da informática destinado a idosos, no período de maio a novembro de 2012. Criação de um questionário para avaliar o período anterior e posterior da intervenção do projeto.  Resultado: As palestras apresentaram um rendimento positivo, alcançando o aproveitamento final de 78,92% na analise dos questionários dos idosos. Já para os acadêmicos, o projeto elevou a didática de ensino e contribuiu para promoção de saúde.  Conclusão: Desse modo o estudo visou que o acesso digital aumentaria as informações e poderia colaborar com o tratamento dos participantes, e os acadêmicos observaram que pequenas ações podem contribuir para a construção de uma sociedade mais preparada, para enfrentar criticamente as informações vinculadas aos medicamentos.

  9. A digital method for period measurements in a nuclear reactor; Um metodo digital para medidas de periodo em um reator nuclear

    Mundim, Sergio Gorretta

    1971-02-15

    The present paper begins by giving a theoretical treatment for the nuclear reactor period. The conventional method of measuring the period is analysed and some previously developed digital methods are described. The paper criticises the latter, pointing out some deficiencies which the proposed process is able to eliminate. All errors connected with this process are also analysed. The paper presents suitable solutions to reduce them to a minimum. The total error is found to he less than the error presented by the other methods described. A digital period meter is designed with memory resources and an automatic scaler changer. Integrated circuits specifications are used in it. Real time experiments with nuclear reactors were made in order to check te validity of the method. The data acquired were applied to a simulated digital period meter implemented in a general purpose computer. The nuclear part of the work was developed at the 'Comissao Nacional de Energia Nuclear' and the simulation work was dane at the 'Departamento de Calculo Cientifico' of COPPE, which also advised the author in the completion of this thesis. (author)

  10. A digital method for period measurements in a nuclear reactor; Um metodo digital para medidas de periodo em um reator nuclear

    Mundim, Sergio Gorretta

    1971-02-15

    The present paper begins by giving a theoretical treatment for the nuclear reactor period. The conventional method of measuring the period is analysed and some previously developed digital methods are described. The paper criticises the latter, pointing out some deficiencies which the proposed process is able to eliminate. All errors connected with this process are also analysed. The paper presents suitable solutions to reduce them to a minimum. The total error is found to he less than the error presented by the other methods described. A digital period meter is designed with memory resources and an automatic scaler changer. Integrated circuits specifications are used in it. Real time experiments with nuclear reactors were made in order to check te validity of the method. The data acquired were applied to a simulated digital period meter implemented in a general purpose computer. The nuclear part of the work was developed at the 'Comissao Nacional de Energia Nuclear' and the simulation work was dane at the 'Departamento de Calculo Cientifico' of COPPE, which also advised the author in the completion of this thesis. (author)

  11. Digital monitoring of mycelium growth kinetics and vigor of shiitake (Lentinula edodes (Berk. Pegler on agar medium Monitoramento digital do crescimento e vigor do shiitake (Lentinula edodes (Berk. Pegler em meio de cultura

    Renato Mamede de Castro Montini

    2006-03-01

    Full Text Available The mycelium growth kinetics and vigor of shiitake (Lentinula edodes (Berk. Pegler strains LE 96/17, LE 98/51, LE 98/53, and LE 98/56 were studied under different agar medium compositions. The strains were from the mycological collection of the Módulo de Cogumelos, Faculdade de Ciências Agronômicas, Unesp-Botucatu, Brazil. Mycelium fragments from stock cultures were transferred to Petri dishes with Sawdust extract-Dextrose-Agar medium. The area of growth and vigor (density of the mycelia were daily recorded with a digital camera, during incubation, until the complete colonization of the Petri dish. The images were analyzed by the freeware UTHSCSA ImageTool, v. 2.0, developed by the University of Texas Health Science Center, San Antonio. The kinetics of mycelium growth, as measured by the mycelium area (mm², has as a deterministic component an exponential function of Gompertz. The vigor, as evaluated by mycelium color in gray scale, was similar for all strains, reached a maximal value between the 4th and 5th day of incubation and decreased further on. The velocity of growth of L. edodes strains was lower in enriched culture media, while vigor was higher. Digital monitoring permits a objective evaluation of the growth kinetics of L. edodes in vitro.Avaliou-se o crescimento e vigor das linhagens LE 96/17, LE 98/51, LE 98/53 e LE 98/56 de Lentinula edodes (Berk Pegler em diferentes composições de meio de cultura. As linhagens foram provenientes da Micoteca do Módulo de Cogumelos da Faculdade de Ciências Agronômicas, Unesp, Campus de Botucatu. Os isolados foram obtidos por propagação vegetativa, pela transferência asséptica do micélio para o meio de cultura de extrato de serragem-dextrose-ágar. O crescimento e vigor do micélio foi fotografado diariamente com uma câmera digital, durante a incubação, até a colonização total da placa de Petri. As imagens foram analisadas pelo programa UTHSCSA ImageTool (freeware, versão 2

  12. Performance of RC columns with partial length corrosion

    Wang Xiaohui; Liang Fayun

    2008-01-01

    Experimental and analytical studies on the load capacity of reinforced concrete (RC) columns with partial length corrosion are presented, where only a fraction of the column length was corroded. Twelve simply supported columns were eccentrically loaded. The primary variables were partial length corrosion in tensile or compressive zone and the corrosion level within this length. The failure of the corroded column occurs in the partial length, mainly developed from or located nearby or merged with the longitudinal corrosion cracks. For RC column with large eccentricity, load capacity of the column is mainly influenced by the partial length corrosion in tensile zone; while for RC column with small eccentricity, load capacity of the column greatly decreases due to the partial length corrosion in compressive zone. The destruction of the longitudinally mechanical integrality of the column in the partial length leads to this great reduction of the load capacity of the RC column

  13. Structural model and excitonic properties of the dimeric RC-LH1-PufX complex from Rhodobacter sphaeroides

    Sener, Melih; Hsin, Jen; Trabuco, Leonardo G.; Villa, Elizabeth; Qian, Pu; Hunter, C. Neil; Schulten, Klaus

    2009-01-01

    The light-harvesting apparatus of the purple bacterial photosynthetic unit consists of a pool of peripheral light-harvesting complexes that transfer excitation energy to a reaction center (RC) via the surrounding pigment-protein complex LH1. Recent electron microscopy and atomic force microscopy studies have revealed that RC-LH1 units of Rhodobacter (Rba.) sphaeroides form membrane-bending dimeric complexes together with the polypeptide PufX. We present a structural model for these RC-LH1-PufX dimeric complexes constructed using the molecular dynamics flexible fitting method based on an EM density map. The arrangement of the LH1 BChls displays a distortion near the proposed location of the PufX polypeptide. The resulting atomic model for BChl arrays is used to compute the excitonic properties of the dimeric RC-LH1 complex. A comparison is presented between the structural and excitonic features of the S-shaped dimeric BChl array of Rba. sphaeroides and the circular BChl arrangement found in other purple bacteria

  14. Analysis and optimization of RC delay in vertical nanoplate FET

    Woo, Changbeom; Ko, Kyul; Kim, Jongsu; Kim, Minsoo; Kang, Myounggon; Shin, Hyungcheol

    2017-10-01

    In this paper, we have analyzed short channel effects (SCEs) and RC delay with Vertical nanoplate FET (VNFET) using 3-D Technology computer-aided design (TCAD) simulation. The device is based on International Technology Road-map for Semiconductor (ITRS) 2013 recommendations, and it has initially gate length (LG) of 12.2 nm, channel thickness (Tch) of 4 nm, and spacer length (LSD) of 6 nm. To obtain improved performance by reducing RC delay, each dimension is adjusted (LG = 12.2 nm, Tch = 6 nm, LSD = 11.9 nm). It has each characteristic in this dimension (Ion/Ioff = 1.64 × 105, Subthreshold swing (S.S.) = 73 mV/dec, Drain-induced barrier lowering (DIBL) = 60 mV/V, and RC delay = 0.214 ps). Furthermore, with long shallow trench isolation (STI) length and thick insulator thickness (Ti), we can reduce RC delay from 0.214 ps to 0.163 ps. It is about a 23.8% reduction. Without decreasing drain current, there is a reduction of RC delay as reducing outer fringing capacitance (Cof). Finally, when source/drain spacer length is set to be different, we have verified RC delay to be optimum.

  15. Development of test objects for image quality evaluation of digital mammography; Desenvolvimento de objetos de teste para avaliacao da qualidade da imagem em mamografia digital

    Pinto, Vitor Nascimento de Carvalho

    2013-07-01

    Mammography is the image exam called 'gold standard' for early detection of breast cancer. 111 Brazil, more than eight million mammograms are carried out per year. With the advancement of technology, the digital systems CR and DR for this diagnostic modality have been increasingly implemented, replacing the conventional screen-film system, which brought environmental problems, like the disposal of chemical waste, and is also responsible for the rejection of radiographic films with processing artifacts. Digital systems, besides not experiencing the problem of environmental pollution, are still capable of image processing, allowing a much lower rejection rate when compared to the conventional system. Moreover, the determination of an accurate diagnosis is highly dependent on the image quality of the examination. To ensure the reliability of the images produced by these systems, it is necessary to evaluate them on a regular basis. Unfortunately, there is no regulation in Brazil about the Quality Assurance of these systems. The aim of this study was to develop a set of test objects that allow the evaluation of some parameters of image quality of these systems, such as field image uniformity, the linearity between the air Kerma incident on detector and the mean pixel value (MPV) of the image, the spatial resolution of the system through the modulation transfer function (MTF) and also to suggest an object to be applied in the evaluation of contrast-to-noise ratio (CNR) and signal-difference-to-noise ratio (SDNR). In order to test the objects. 10 mammography centers were evaluated, seven with CR systems and three with the DR systems. To evaluate the linearity, besides the test objects high sensitivity dosimeters were necessary to be used, namely LiF:Mg,Cu,P TL dosimeters. The use of these dosimeters was recommended in order to minimize the time required to perform the tests and to decrease the number of exposures needed. For evaluation of digital images in DICOM

  16. Use of different simulators to quality evaluation of image quality in digital mammography; Utilizacao de diferentes simuladores na avaliacao da qualidade da imagem em mamografia digital

    Pereira, Leslie S.; Coutinho, Celia M.C., E-mail: leslie@ird.gov.br, E-mail: celia@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Magalhaes, Luis A.G.; Almeida, Carlos Eduardo de, E-mail: luisalexandregm@hotmail.com, E-mail: cea71@yahoo.com.br [Universidade do Estado do Rio de Janeiro (LCR/UERJ), Rio de Janeiro, RJ (Brazil). Laboratorio de Ciencias Radiologicas

    2013-11-01

    In this study, the digital images were acquired with different exposure simulators to evaluate the quality of the image, noting the tumor mass detection, microcalcification fiber and representing regions of interest during mammography. The technical parameters of exposure depends on the thickness and composition of the breast, thus affecting the dose and image quality. The simulators were used: ACR, SBP 1054, BREAST PHANTOM CIRS and for evaluation of image quality, as well as measures kerma incident on the entrance surface (Ki) and calculating the mean glandular dose (MGD)

  17. Formação de professores, Literacia Digital e Inclusão Sociodigital: estudo de caso em curso a distância da Universidade Federal do Tocantins

    Alves, Elaine Jesus

    2017-01-01

    Tese de Doutoramento em Ciências da Educação - Especialidade de Tecnologia Educativa No cenário do mundo conectado em redes de comunicação digital em que os alunos usam cada vez mais cedo os artefatos tecnológicos e desenvolvem naturalmente habilidades para seu uso, urge a necessidade do professor investir na criação de competências suficientemente amplas que lhes permitam ter uma atuação efetiva no manuseio fluente das mídias, e aplicá-las criativamente na sua prática pedagógi...

  18. Banco de dados em história da educação: o meio digital e a pesquisa em hipertexto

    Maria Stephanou

    2012-07-01

    Full Text Available  Este paper tem o objetivo de socializar os problemas e desafios que o processo de investigação em história da educação acarreta junto a acervos documentários variados. Na solução destes problemas analisa-se de modo especial a capacidade do Folio views como ferramenta que permite uma pesquisa textual.Palavras chaves: Folio views, pesquisa textual.   Abstract This paper aims at to socialize the problems and challenges the investigation process in history of education causes to diverse collections and documentaries. To that problems solution it is specially analyzed the Folio views capacity to operate as a tool that allows a textual research. Keywords: Folio views, textual research. 

  19. Applying corrections to digitized data while digitizing magnetic chart

    Suresh, T.

    data could be time consuming during online digitizing operation. Secondly, this could be more error prone if proper error detection and correction methods are not em- ployed. Here a simpler method is illustrated which has been used for digitizing...

  20. A intimidade em tempos de rede social digital – O Facebook e a midiatização do íntimo

    José Antonio Martinuzzo

    2015-07-01

    Full Text Available Este artigo consiste de uma investigação sobre o conceito de intimidade no âmbito da rede social digital Facebook. As perguntas iniciais foram constituídas para saber qual a visão que os usuários da rede social têm acerca dessa esfera da vida cotidiana, e quais são os critérios para a publicação de conteúdos íntimos na era do Facebook. A metodologia utilizada inclui revisão de literatura específica, abordando temas como intimidade, tecnologia, sociedade em rede, redes sociais na internet, entre outros; e aplicação de uma pesquisa on-line junto aos usuários da rede social digital por intermédio de um questionário. Os resultados obtidos evidenciam que o conceito de intimidade mudou com o surgimento de redes sociais digitais.

  1. A new 4π(LS)-γ coincidence counter at NCBJ RC POLATOM with TDCR detector in the beta channel.

    Ziemek, T; Jęczmieniowski, A; Cacko, D; Broda, R; Lech, E

    2016-03-01

    A new 4π(LS)-γ coincidence system (TDCRG) was built at the NCBJ RC POLATOM. The counter consists of a TDCR detector in the beta channel and scintillation detector with NaI(Tl) crystal in the gamma channel. The system is equipped with a digital board with FPGA, which records and analyses coincidences in the TDCR detector and coincidences between the beta and gamma channels. The characteristics of the system and a scheme of the FPGA implementation with behavioral simulation are given. The TDCRG counter was validated by activity measurements on (14)C and (60)Co solutions standardized in RC POLATOM using previously validated methods. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. R$_{b}$ - R$_{c}$ crisis and new physics

    Bhattacharya, G; Hou Wei Shu; Bhattacharyya, Gautam; Branco, Gustavo C; Hou, Wei Shu

    1996-01-01

    The experimental values of R_b and R_c are the only data which do not seem to agree with Standard Model predictions. Although it is still premature to draw any definite conclusions, it is timely to look for new physics which could explain the excess in R_b and deficit in R_c. We investigate this problem in a simple extension of the Standard Model, where a charge +2/3 isosinglet quark is added to the standard spectrum. Upon the further introduction of an extra scalar doublet, one finds a solution with interesting consequences.

  3. Deformation Analysis of RC Ties Externally Strengthened with FRP Sheets

    Gribniak, V.; Arnautov, A. K.; Kaklauskas, G.; Jakstaite, R.; Tamulenas, V.; Gudonis, E.

    2014-11-01

    The current study has two objectives: to validate the ability of the Atena finite-element software to estimate the deformations of reinforced concrete (RC) elements strengthened with fiber-reinforced polymer (FRP) sheets and to assess the effect of FRP-to-concrete bond strength on the results of numerical simulation. It is shown that the bond strength has to be selected according to the overall stiffness of the composite element. The numerical results found are corroborated experimentally by tensile tests of RC elements strengthened with basalt FRP sheets.

  4. Vigilância e anonimato em aplicativos mobile: um estudo sobre a privacidade em relações homoafetivas no digital | Surveillance and anonymity in mobile applications: a study about the privacy in digital same sex relations

    Manuela do Corral Vieira

    2016-11-01

    Full Text Available RESUMO Este artigo busca compreender de que forma homens que utilizam os aplicativos de relacionamento Tinder, Grindr e Scruff – considerando seus pontos de semelhanças e de especificidades, conforme serão detalhadas ao longo deste estudo – experienciam facetas de suas identidades e constroem práticas de sociabilidade, fazendo uso ou não do anonimato, na vivência de relações homoafetivas. Além disso, a pesquisa analisa de que forma estas plataformas digitais se configuram como heterotopias e “armários digitais”, nos quais os sujeitos desenvolvem formas de resistência e proteção a práticas de vigilâncias sociais on e off-lines. Palavras-chave: Privacidade; Anonimato; Identidade; Sociabilidade; Aplicativos de Relacionamento. ABSTRACT This article seeks to understand how men who use the relationship applications Tinder, Grindr and Scruff – considering their similarities points and specificities, as will be detailed in the course of this study – experience facets of their identities and build sociability practices making use or not of anonymity, in experiences of same sex relations. Furthermore, the research examines how these digital platforms are configured as heterotopias and "digital lockers" in which subjects develop forms of resistance and protection to the surveillances practices on and off-lines. Keywords: Privacy; Anonymity; Identity; Sociability; Relationship Applications.

  5. Seismic Performance of Multi-Span RC Railway Bridges

    Georgakis, Christos; Barrau, Xavier

    2008-01-01

    Presently, there is no clear method for determining the optimal railway bridge design for a particular ground type and expected seismic intensity. Four main types of RC bridge dominate the current multi-span railway bridge design trends – the Simply Supported Beam, Continuous Box-Girder (CBG), CBG...

  6. Damage Localization and Quantification of Earthquake Excited RC-Frames

    Skjærbæk, P.S.; Nielsen, Søren R.K.; Kirkegaard, Poul Henning

    In the paper a recently proposed method for damage localization and quantification of RC-structures from response measurements is tested on experimental data. The method investigated requires at least one response measurement along the structure and the ground surface acceleration. Further, the t...

  7. The RC Circuit: An Approach with Fourier Transforms

    The RC Circuit: An Approach with Fourier Transforms. Classroom Volume 21 Issue 11 November 2016 pp 1029-1042 ... But a lot of things, (including the complex impedanceitself, and some insight into complex analysis) can be understoodbetter if we use the FT approach to solve the differentialequations that come up in ...

  8. JOVENS E ADULTOS EM PROCESSO DE ESCOLARIZAÇÃO E AS TECNOLOGIAS DIGITAIS. YOUTH AND ADULTS IN THE SCHOOLING PROCESS AND THE DIGITAL TECHNOLOGIES

    Bianca Maria Santana de Brito

    2013-11-01

    Full Text Available As tecnologias digitais compõem um cenário de mudanças em diversas esferas da sociedade. O objetivo deste trabalho foi investigar a presença de tais tecnologias na EJA (educação de jovens e adultos, por meio dos usos que estudantes dizem fazer dessas tecnologias e as possíveis relações desses usos com o processo de escolarização e as aprendizagens que vivenciam. Foram aplicados trinta questionários a jovens e adultos matriculados em salas de EJA de escolas públicas da região da Freguesia do Ó e Brasilândia, na zona noroeste de São Paulo, Brasil, e foram realizadas entrevistas de profundidade com cinco dos sujeitos que responderam aos questionários. Os resultados indicam que a maior parte dos sujeitos utiliza as tecnologias digitais fora das escolas para se comunicarem, para se divertirem e aprenderem sobre temas relacionados a projetos pessoais e conteúdos culturais de seu interesse. Também é possível afirmar que a apropriação das tecnologias, explorando suas diversas possibilidades para a realização de projetos individuais ou coletivos, depende de saberes prévios aprendidos na escola. Sem estarem alfabetizados, por exemplo, a capacidade de navegação pela rede fica comprometida, e quanto mais escolarizados, mais os sujeitos da EJA se apropriam das tecnologias digitais. A partir das análises destes resultados são desenhadas recomendações de como os projetos de EJA, as escolas e as políticas públicas podem contribuir para a ampliação dos usos das tecnologias digitais, e para que estes usos auxiliem nos processos de aprendizagem ao longo da vida dos sujeitos da EJA. Digital technologies form a scenario of changes in many spheres of society. The objective of this study is to investigate the existence of such technologies in youth and adult education, through the uses of technologies that students report and the relationship between these uses and the schooling process they experience. Thirty questionnaires were

  9. A SOCIEDADE DIGITAL DA INFORMAÇÃO E COMUNICAÇÃO: UMA HISTÓRIA EM CONSTRUÇÃO

    Josimar de Mendonça

    2016-04-01

    Full Text Available Resumo: O objetivo deste artigo é demonstrar como as Tecnologias Digitais de Comunicação e Informação – TDIC, a partir do advento da Rede Mundial de Computadores (Internet, influencia a sociedade contemporânea e seus atores e discutir como esse recrudescimento tecnológico culminou na transposição da modernidade, modificando o conceito de público e privado a ponto diluir a identidade de ambos. O artigo propõe contextualizar historicamente o advento e a trajetória da Internet, evidenciando o novo conceito de comunicação que se estabelece por intermédio dos recursos oferecidos por ela, como também mostrar como as inovações tecnológicas modificam a realidade social e afetam diretamente as relações pessoais.Palavras chave:  Tecnologia, História, Pós-modernidade.Abstract: The purpose of this article is to demonstrate how the Digital Communications and Information Technology - TDIC , from the advent of the World Wide Web (Internet , influence contemporary society and its actors and discuss how this technological upsurge culminated in the transposition of modernity, modifying the concept of public and private as to dilute the identity of both. The article proposes historically contextualize the advent and the trajectory of the Internet , showing the new concept of communication established through the resources offered by it , but also show how technological innovations change the social reality and directly affect personal relationships.Keywords: Tecnology, History,  Postmodernism.Recebido em: 24/07/2015  – Aceito em 03/11/2015

  10. Fabricação digital de maquetes físicas: tangibilidade no processo de projeto em Arquitetura

    Wilson Florio

    2011-01-01

    Full Text Available In this article two different types of experiments are discussed. In the first one we have a 3D digital model transformed into 2D surfaces by the "unfolding" technique, printed and manually assembled. In the second one, some experiments were made using the Universal Laser Cutter Systems. The aim is to discuss the role of the physical artifacts during the process of understanding complex forms and spaces, and to pursuit more efficient ways to improve the design process. The results until the present moment allow to confirm that, although the limitations in its fabrication, the models created by the laser cutter substantially contribute to improve the comprehension of projects, particularly constructive details, which allows to materialize and analysis details, decomposing and recomposing the object two and three-dimensionally. The restrictions which were observed are related to the scale of the artifact, the two-dimensionality of the drawingsand the cutting area dimensions.

  11. A importância do desenvolvimento de revistas científicas em mídia digital: O caso da Revista Agrarian

    Poliana Campos Burin

    2014-03-01

    Full Text Available Estudos e pesquisas são ações fundamentais em qualquer área do conhecimento e funcionam como alicerces no processo de evolução e desenvolvimento. Tão importante quanto a geração do conhecimento é a disseminação e difusão destas informações, utilizando meios de comunicação abrangentes e eficientes. O objetivo dos autores foi apresentar o caso da Revista Científica Agrarian: sua criação, desenvolvimento e consolidação, enfatizando os resultados e ações obtidos durante seus 6 anos em atividade. A revista científica foi criada em 2008, sendo a primeira revista científica de Mato Grosso do Sul de acesso aberto e totalmente digital que publica trabalhos nas áreas de Ciências Agrárias, Ciência e Tecnologia de Alimentos, Economia e Administração do Agronegócio. A Agrarian recebe submissões de todas as regiões do país, o que possibilita disponibilizar conhecimentos de grande importância ao público, entre técnicos, pesquisadores e estudantes. Foram publicadas vinte e uma edições entre os anos 2008-2013, todas disponibilizadas no Sistema Eletrônico de Editoração de Revistas (SEER. Com um número de 615 submissões e 285 artigos publicados, é possível concluir que a Revista Agrarian está se tornando um veículo de informação confiável e consolidado. Estes dados também confirmam as hipóteses relacionadas à importância de veículos práticos e econômicos para a difusão do conhecimento científico agrário no Estado do Mato Grosso do Sul, importante centro do agronegócio no País.

  12. Design of RC frames for pre-selected collapse mechanism and ...

    In this study, total energy of RC frames is calculated and .... curvature relations of RC beam and column members are required for both ..... Case study ..... Turkish Seismic Design Code 2007 Ministry of Public Works and Settlement, Ankara.

  13. 75 FR 1356 - RC2 Corporation, Provisional Acceptance of a Settlement Agreement and Order

    2010-01-11

    ... primarily at toy stores and various retailers nationwide, and secondarily through RC2's e-commerce websites... various retailers nationwide, and secondarily through RC2's e-commerce Web sites or as `sub-components' of...(e). Published below is a provisionally-accepted Settlement Agreement with RC2 Corporation...

  14. Limit analysis on FRP-strengthened RC members

    D. De Domenico

    2014-07-01

    Full Text Available Reinforced concrete (RC members strengthened with externally bonded fiber-reinforced-polymer (FRP plates are numerically investigated by a plasticity-based limit analysis approach. The key-concept of the present approach is to adopt proper constitutive models for concrete, steel reinforcement bars (re-bars and FRP strengthening plates according to a multi-yield-criteria formulation. This allows the prediction of concrete crushing, steel bars yielding and FRP rupture that may occur at the ultimate limit state. To simulate such limitstate of the analysed elements, two iterative methods performing linear elastic analyses with adaptive elastic parameters and finite elements (FEs description are employed. The peak loads and collapse mechanisms predicted for FRP-plated RC beams are validated by comparison with the corresponding experimental findings.

  15. GR712RC- Dual-Core Processor- Product Status

    Sturesson, Fredrik; Habinc, Sandi; Gaisler, Jiri

    2012-08-01

    The GR712RC System-on-Chip (SoC) is a dual core LEON3FT system suitable for advanced high reliability space avionics. Fault tolerance features from Aeroflex Gaisler’s GRLIB IP library and an implementation using Ramon Chips RadSafe cell library enables superior radiation hardness.The GR712RC device has been designed to provide high processing power by including two LEON3FT 32- bit SPARC V8 processors, each with its own high- performance IEEE754 compliant floating-point-unit and SPARC reference memory management unit.This high processing power is combined with a large number of serial interfaces, ranging from high-speed links for data transfers to low-speed control buses for commanding and status acquisition.

  16. An experimental investigation for external RC shear wall applications

    Kaltakci, M. Y.; Ozturk, M.; Arslan, M. H.

    2010-09-01

    The strength and rigidity of most reinforced concrete (RC) buildings in Turkey, which are frequently hit by destructive earthquakes, is not at a sufficient level. Therefore, the result of earthquakes is a significant loss of life and property. The strengthening method most commonly preferred for these type of RC buildings is the application of RC infilled walls (shear walls) in the frame openings of the building. However, since the whole building has to be emptied and additional heavy costs arise during this type of strengthening, users prefer not to strengthen their buildings despite the heavy risk they are exposed to. Therefore, it is necessary to develop easier-to-apply and more effective methods for the rapid strengthening of housing and the heavily-used public buildings which cannot be emptied during the strengthening process (such as hospitals and schools). This study empirically analyses the different methods of a new system which can meet this need. In this new system, named "external shear wall application", RC shear walls are applied on the external surface of the building, along the frame plane rather than in the building. To this end, 7 test samples in 1/2 and 1/3 geometrical scale were designed to analyse the efficiency of the strengthening technique where the shear wall leans on the frame from outside of the building (external shear wall application) and of the strengthening technique where a specific space is left between the frame and the external shear wall by using a coupling beam to connect elements (application of external shear wall with coupling beam). Test results showed that the maximum lateral load capacity, initial rigidity and energy dissipation behaviours of the samples strengthened with external shear wall were much better than those of the bare frames.

  17. An experimental investigation for external RC shear wall applications

    M. Y. Kaltakci

    2010-09-01

    Full Text Available The strength and rigidity of most reinforced concrete (RC buildings in Turkey, which are frequently hit by destructive earthquakes, is not at a sufficient level. Therefore, the result of earthquakes is a significant loss of life and property. The strengthening method most commonly preferred for these type of RC buildings is the application of RC infilled walls (shear walls in the frame openings of the building. However, since the whole building has to be emptied and additional heavy costs arise during this type of strengthening, users prefer not to strengthen their buildings despite the heavy risk they are exposed to. Therefore, it is necessary to develop easier-to-apply and more effective methods for the rapid strengthening of housing and the heavily-used public buildings which cannot be emptied during the strengthening process (such as hospitals and schools. This study empirically analyses the different methods of a new system which can meet this need. In this new system, named "external shear wall application", RC shear walls are applied on the external surface of the building, along the frame plane rather than in the building. To this end, 7 test samples in 1/2 and 1/3 geometrical scale were designed to analyse the efficiency of the strengthening technique where the shear wall leans on the frame from outside of the building (external shear wall application and of the strengthening technique where a specific space is left between the frame and the external shear wall by using a coupling beam to connect elements (application of external shear wall with coupling beam. Test results showed that the maximum lateral load capacity, initial rigidity and energy dissipation behaviours of the samples strengthened with external shear wall were much better than those of the bare frames.

  18. Centrifuge modeling of rocking-isolated inelastic RC bridge piers.

    Loli, Marianna; Knappett, Jonathan A; Brown, Michael J; Anastasopoulos, Ioannis; Gazetas, George

    2014-12-01

    Experimental proof is provided of an unconventional seismic design concept, which is based on deliberately underdesigning shallow foundations to promote intense rocking oscillations and thereby to dramatically improve the seismic resilience of structures. Termed rocking isolation , this new seismic design philosophy is investigated through a series of dynamic centrifuge experiments on properly scaled models of a modern reinforced concrete (RC) bridge pier. The experimental method reproduces the nonlinear and inelastic response of both the soil-footing interface and the structure. To this end, a novel scale model RC (1:50 scale) that simulates reasonably well the elastic response and the failure of prototype RC elements is utilized, along with realistic representation of the soil behavior in a geotechnical centrifuge. A variety of seismic ground motions are considered as excitations. They result in consistent demonstrably beneficial performance of the rocking-isolated pier in comparison with the one designed conventionally. Seismic demand is reduced in terms of both inertial load and deck drift. Furthermore, foundation uplifting has a self-centering potential, whereas soil yielding is shown to provide a particularly effective energy dissipation mechanism, exhibiting significant resistance to cumulative damage. Thanks to such mechanisms, the rocking pier survived, with no signs of structural distress, a deleterious sequence of seismic motions that caused collapse of the conventionally designed pier. © 2014 The Authors Published by John Wiley & Sons Ltd.

  19. Investigation on Strengthening Approaches Adopted for Poorly Detailed RC Corbels

    Ram Chandra Neupane

    2017-05-01

    Full Text Available Poor detailing of the position of bearing pad over reinforced concrete (RC corbel may lead to premature failure, which is undesired and structurally vulnerable. An appropriate retrofitting solution is necessary to ensure the functionality of such RC corbels. Considering the growing popularity of external carbon fiber-reinforced polymer (CFRP in retrofitting, this research examines the effectiveness of an externally wrapped unidirectional CFRP sheet and compares its performance against traditional retrofitting methods. Moreover, it is intended to fulfill the lack of extensive research on external CFRP application for corbel strengthening. A total of eight medium-scale corbel specimens were tested on vertical load. Observed premature failure due to placing the bearing pad near the edge of corbel was verified and the effectiveness of the proposed structural strengthening solutions was studied. Experimental results show that although the loading capacity of the damaged corbel due to the poor detailing of bearing pad position could not be fully recovered, the external CFRP wrapping method demonstrated superior performance over RC jacketing and was able to prevent localized failure. Further study based on non-linear 3D finite element analysis (FEA was carried out to identify the governing parameters of each retrofitting solution. Numerical studies suggested important parameters of various retrofitting alternatives for higher capacity assurance.

  20. Investigation on the thermographic detection of corrosion in RC structures

    Tantele, Elia A.; Votsis, Renos A.; Kyriakides, Nicholas; Georgiou, Panagiota G.; Ioannou, Fotia G.

    2017-09-01

    Corrosion of the steel reinforcement is the main problem of reinforced concrete (RC) structures. Over the past decades, several methods have been developed aiming to detect the corrosion process early in order to minimise the structural damage and consequently the repairing costs. Emphasis was given in developing methods and techniques of non-destructive nature providing fast on-the-spot detection and covering large areas rather that concentrating on single locations. This study, investigates a non-destructive corrosion detection technique for reinforced concrete, which is based on infrared thermography and the difference in thermal characteristics of corroded and non-corroded steel rebars. The technique is based on the principle that corrosion products have poor heat conductivity, and they inhibit the diffusion of heat that is generated in the reinforcing bar due to heating. For the investigation RC specimens, have been constructed in the laboratory using embedded steel bars of different corrosion states. Afterward, one surface of the specimens was heated using an electric device while thermal images were captured at predefined time instants on the opposite surface with an IR camera. The test results showed a clear difference between the thermal characteristics of the corroded and the non-corroded samples, which demonstrates the potential of using thermography in corrosion detection in RC structures.

  1. A multi-standard active-RC filter with accurate tuning system

    Ma Heping; Yuan Fang; Shi Yin; Dai, F F

    2009-01-01

    A low-power, highly linear, multi-standard, active-RC filter with an accurate and novel tuning architecture is presented. It exhibits IEEE 802.11 a/b/g (9.5 MHz) and DVB-H (3 MHz, 4 MHz) application. The filter exploits digitally-controlled polysilicon resistor banks and a phase lock loop type automatic tuning system. The novel and complex automatic frequency calibration scheme provides better than 4 corner frequency accuracy, and it can be powered down after calibration to save power and avoid digital signal interference. The filter achieves OIP3 of 26 dBm and the measured group delay variation of the receiver filter is 50 ns (WLAN mode). Its dissipation is 3.4 mA in RX mode and 2.3 mA (only for one path) in TX mode from a 2.85 V supply. The dissipation of calibration consumes 2 mA. The circuit has been fabricated in a 0.35 μm 47 GHz SiGe BiCMOS technology; the receiver and transmitter filter occupy 0.21 mm 2 and 0.11 mm 2 (calibration circuit excluded), respectively.

  2. A multi-standard active-RC filter with accurate tuning system

    Ma Heping; Yuan Fang; Shi Yin [Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083 (China); Dai, F F, E-mail: hpma@semi.ac.c [Department of Electrical and Computer Engineering, Auburn University, Auburn, AL 36849-5201 (United States)

    2009-09-15

    A low-power, highly linear, multi-standard, active-RC filter with an accurate and novel tuning architecture is presented. It exhibits IEEE 802.11 a/b/g (9.5 MHz) and DVB-H (3 MHz, 4 MHz) application. The filter exploits digitally-controlled polysilicon resistor banks and a phase lock loop type automatic tuning system. The novel and complex automatic frequency calibration scheme provides better than 4 corner frequency accuracy, and it can be powered down after calibration to save power and avoid digital signal interference. The filter achieves OIP3 of 26 dBm and the measured group delay variation of the receiver filter is 50 ns (WLAN mode). Its dissipation is 3.4 mA in RX mode and 2.3 mA (only for one path) in TX mode from a 2.85 V supply. The dissipation of calibration consumes 2 mA. The circuit has been fabricated in a 0.35 {mu}m 47 GHz SiGe BiCMOS technology; the receiver and transmitter filter occupy 0.21 mm{sup 2} and 0.11 mm{sup 2} (calibration circuit excluded), respectively.

  3. Avaliação de métodos indiretos de digitalização de radiografias cefalométricas em comparação ao método digital direto Evaluation of indirect methods of digitization of cephalometric radiographs in comparison with the direct digital method

    Cleomar Donizeth Rodrigues

    2010-08-01

    Full Text Available OBJETIVO: avaliar métodos de digitalização indireta de radiografias cefalométricas em comparação ao método digital direto. MÉTODOS: a amostra foi composta de dez radiografias cefalométricas adquiridas pelo Orthopantomograph OP100/Orthocef OC100 (GE - Instrumentarium, digital direto. As imagens foram inseridas no programa Adobe Photoshop® e cinco pontos cefalométricos foram marcados. Procedeu-se a impressão em transparência e foi feita a digitalização indireta das imagens impressas, por meio das câmeras fotográficas digitais Sony® DSC-W5 e Canon® Rebel XT/EOS 350D, fixas em estativa, nas distâncias de 25cm e 60cm e com o scanner Scan Jet 4C Hewlett Packard®. As imagens diretas e indiretas foram inseridas e calibradas no software Radiocef Studio (Radiomemory®, Brasil, marcando-se o centro dos pontos previamente assinalados. A análise cefalométrica computadorizada gerou três grandezas angulares e quatro lineares, as quais foram submetidas a tratamento estatístico. RESULTADOS: as imagens do scanner Scan Jet 4C HP® demonstraram pequenas alterações significativas, porém, sem relevância clínica. Quando da digitalização a 60cm da radiografia, as duas câmeras causaram distorções que foram significativas mas clinicamente aceitáveis; e, a 25cm, causaram as maiores distorções, com importância clínica, na Canon® Rebel XT. CONCLUSÃO: o scanner Scan Jet 4C HP® com leitor de transparências foi o melhor método e as câmeras operando a 60cm mostraram-se adequadas para digitalização de radiografias. As câmeras na distância de 25cm causaram distorções na imagem que alteraram as medidas lineares, podendo a Canon® Rebel XT comprometer o diagnóstico ortodôntico.OBJECTIVE: To evaluate the indirect digitization method of cephalometric radiographs in comparison with the direct digital method. METHODS: The sample was composed of ten cephalometric radiographs acquired by Orthopantomograph OP100/Orthocef OC100 (GE

  4. Reflexões acerca dos programas de inclusão digital a partir da análise do Acessa São Paulo em assentamentos rurais │ Reflections on digital inclusion programs based on a case-study of Access São Paulo in rural settlements

    Cátia Regina Muniz

    2013-11-01

    Full Text Available Resumo A proposta deste artigo é destacar algumas reflexões realizadas sobre o programa de inclusão digital denominado Acessa SP, do governo do Estado de São Paulo, tendo por base os dados coletados em pesquisa de pós-doutorado, em dois assentamentos rurais: Haroldina, no município de Mirante do Paranapanema, e Gleba XV de Novembro, no município de Rosana. A pesquisa de campo se fundamentou na metodologia etnográfica. O resultado da pesquisa mostrou que há muitos desafios a serem enfrentados para que se atinjam as metas do programa, ou seja, promover melhoria nas condições de vida dos usuários, por meio das tecnologias. Palavras-chave inclusão digital, assentamentos rurais, Acessa SP, tecnologias, desafios. Abstract The purpose of this article is to highlight some reflections made on the digital inclusion program called Access SP, by the state government of São Paulo, based on data collected in postdoctoral research in two rural settlements: Haroldina, in the municipality of Mirante do Paranapanema, and Gleba XV Novembro, in the city of Rosana. The field research was based on ethnographic methodology. The results showed that there are many challenges to be faced for the achievement of program goals, i.e. to promote improvement in the living conditions of users through technologies. Keywords digital inclusion, rural settlements, Acessa SP, technologies, challenges.

  5. A prática de alfabetização em Informação e Comunicação em Saúde: o olhar dos agentes comunitários de Saúde sobre o projeto de Inclusão Digital em Sergipe, Brasil

    Pablo Boaventura Sales Paixão

    Full Text Available Apresentam-se os resultados iniciais do projeto de Inclusão Digital de agentes comunitários de Saúde (ACS de Sergipe, Brasil, quando da realização das práticas de alfabetização em Informação e Comunicação (ALFIN, por meio de Oficinas desenvolvidas como estratégia de aproximação entre os ACS de Sergipe e as Tecnologias de Informação e Comunicação (TIC. Identificam-se caminhos efetivos de infoinclusão social, fundamentando-se na Teoria da Ação Comunicativa de Habermas e nos estudos de Paulo Freire. Utiliza-se a abordagem de pesquisa qualitativa e a tipologia do Estudo de Caso e do Grupo Focal para o esquadrinhamento das práticas de ALFIN a distância.

  6. A prática de alfabetização em Informação e Comunicação em Saúde: o olhar dos agentes comunitários de Saúde sobre o projeto de Inclusão Digital em Sergipe, Brasil

    Pablo Boaventura Sales Paixão

    2011-09-01

    Full Text Available Apresentam-se os resultados iniciais do projeto de Inclusão Digital de agentes comunitários de Saúde (ACS de Sergipe, Brasil, quando da realização das práticas de alfabetização em Informação e Comunicação (ALFIN, por meio de Oficinas desenvolvidas como estratégia de aproximação entre os ACS de Sergipe e as Tecnologias de Informação e Comunicação (TIC. Identificam-se caminhos efetivos de infoinclusão social, fundamentando-se na Teoria da Ação Comunicativa de Habermas e nos estudos de Paulo Freire. Utiliza-se a abordagem de pesquisa qualitativa e a tipologia do Estudo de Caso e do Grupo Focal para o esquadrinhamento das práticas de ALFIN a distância.

  7. The gammaTuRC Nanomachine Mechanism and Future Applications

    Riehlman, Timothy D.

    The complexity and precision of the eukaryotic cell's cytoskeletal network is unrivaled by any man-made systems, perfected by billions of years of evolution, mastering elegant processes of self-assembly, error correction, and self-repair. Understanding the capabilities of these networks will have important and far reaching applications in human medicine by aiding our understanding of developmental processes, cellular division, and disease mechanisms, and through biomimicry will provide insights for biosynthetic manufacturing at the nanoscale and across scales. My research utilizes cross species techniques from Human to the model organism of Fission Yeast to investigate the structure and mechanisms of the g-tubulin ring complex (gTuRC). The gTuRC is a highly conserved eukaryotic multiprotein complex serving as a microtubule organizing center (MTOC) responsible for microtubule nucleation through templating, regulation of dynamics, and establishment of microtubule polarity. Microtubules are 25 nm diameter dynamic flexible polymers of a/b-tubulin heterodimers that function as scaffolds, force generators, distributors, and intracellular highways. The microtubule cytoskeleton is essential for numerous fundamental cellular processes such as mitotic division of chromosomes and cell division, organelle distribution within the cell, cell signaling, and cell shape. This incredible diversity in functions is made possible in part due to molecular motor Kinesin-like proteins (Klps), which allow expansion into more specialized neural, immune, and ciliated cell functions. Combined, the MTOC, microtubules, and Klps represent ideal microtubule cytoskeleton protein (MCP) modular components for in vitro biomimicry towards generation of adaptable patterned networks for human designed applications. My research investigates the hypothesis that a mechanistic understanding of conserved MTOC gTuRC mechanisms will help us understand dynamic cellular nanomachines and their ability to self

  8. Some security results of the RC4+ stream cipher

    Banik, Subhadeep; Jha, Sonu

    2015-01-01

    to any even 8-bit constant other than 0xAA. Therefore, the question that naturally arises is whether the design of RC4+ can be protected by fixing the pad parameter to some constant odd value. In this paper, we try to answer this very question. We show that the design is still vulnerable by mounting...... in terms of number of faults required and the computational complexity. In fact, we reduce the number of faults by around 11264 on average, and our algorithm is around 26 times faster....

  9. Calibração em serviço de câmara digital de baixo custo com o uso de pontos de apoio altimétrico

    Paula Debiasi

    Full Text Available O conhecimento dos parâmetros que definem a geometria interna de uma câmara é fundamental em trabalhos fotogramétricos. Porém, é de suma importância que o processo de calibração da câmara seja realizado em condições técnicas e ambientais similares ao aerolevantamento. No georreferenciamento direto os parâmetros de orientação exterior da câmara podem ser determinados com base nas observações GPS e INS. A utilização destes parâmetros, em um processo de calibração com parâmetros adicionais, possibilita a atenuação de correlações entre parâmetros de orientação interior e exterior. Este artigo investiga o uso dos parâmetros de posição da câmara e diferentes configurações de pontos de apoio altimétrico na calibração em serviço de uma câmara digital Kodak DSC Pro SLR/c. O impacto do uso de faixas cruzadas na calibração em serviço foi avaliado pela análise da correlação estatística entre os parâmetros de orientação interior e exterior. Finalmente, as exatidões planialtimétricas obtidas nos experimentos de calibração em serviço, com diferentes configurações de pontos de apoio altimétrico e faixas de voo, foram comparadas através da análise das discrepâncias de pontos de verificação.

  10. Ultimate capacity and influenced factors analysis of nuclear RC containment subjected to internal pressure

    Song Chenning; Hou Gangling; Zhou Guoliang

    2014-01-01

    Ultimate compressive bearing capacity, influenced factors and its rules of nuclear RC containment are key problems of safety assessment, accident treatment and structure design, etc. Ultimate compressive bearing capacity of nuclear RC containment is shown by concrete damaged plasticity model and steel double liner model of ABAQUS. The study shows that the concrete of nuclear RC containment cylinder wall becomes plastic when the internal pressure is up to 0.87 MPa, the maximum tensile strain of steel liner exceeds 3000 × 10 6 and nuclear RC containment reaches ultimate status when the internal pressure is up to 1.02 MPa. The result shows that nuclear RC containment is in elastic condition under the design internal pressure and the bearing capacity meets requirement. Prestress and steel liner play key parts in the ultimate internal pressure and failure mode of nuclear RC containment. The study results have value for the analysis of ultimate compressive bearing capacity, structure design and safety assessment. (authors)

  11. Numerical model of RC beam response to corrosion

    German, Magdalena; Pamin, Jerzy

    2018-01-01

    The chloride-induced corrosion of reinforcement used to be represented by Tuutti's model with initiation and propagation phases. During the initiation phase chlorides penetrate the concrete cover and accumulate around reinforcement bars. The chloride concentration in concrete increases until it reaches a chloride threshold value, causing deterioration of the passive layer of reinforcement. Then the propagation phase begins. During the propagation phase steel has no natural anti-corrosion protection, a corrosion current flows and this induces the production of rust. A growing volume of corrosion products generates stresses in concrete, which leads to cracking, splitting, delamination and loss of strength. The mechanical response of RC elements to reinforcement corrosion has mostly been examined on the basis of a 2D cross-section analysis. However, with this approach it is not possible to represent both corrosion and static loading. In the paper a 3D finite element model of an RC beam with the two actions applied is presented. Rust is represented as an interface between steel and concrete, considering the volumetric expansion of rust.

  12. Seismic performance of masonry-infilled RC frames

    Mircea Bârnaure

    2016-09-01

    Full Text Available The masonry infill of RC frames structures is generally considered as non-structural. The design of the concrete frames is often made by ignoring the influence of the masonry infill, which is only accounted for its mass. The experience on buildings submitted to earthquakes shows that masonry infill walls completely change the behaviour of bare frames due to increased initial stiffness and low deformability. The way in which masonry infills affect the RC frames members is difficult to predict, as different failure modes can occur either in the masonry or in the surrounding frame. In addition to local effects, the position of the masonry infills at different levels can lead to structural irregularity, with a strong influence on the global seismic response of the building. Less infilled stories, also called soft stories, have a particularly unfavourable behaviour under seismic loads, as frame members at these levels are more susceptible to failure. This paper analyses the differences in the behaviour of bare and infilled frames through numerical modelling. Nonlinear push-over analyses of infilled frames are carried out under in-plane vertical and lateral loading. The infill panels are modelled as equivalent single diagonal struts. Several force-displacements laws are considered for these diagonals.

  13. Strengthening of RC bridge slabs using CFRP sheets

    Fahmy A. Fathelbab

    2014-12-01

    Full Text Available Many old structures became structurally insufficient to carry the new loading conditions requirements. Moreover, they suffer from structural degradation, reinforcement steel bars corrosion, bad weather conditions…etc. Many official authorities in several countries had recognized many old bridges and buildings as structurally deficient by today’s standards. Due to these reasons, structural strengthening became an essential requirement and different strengthening techniques appeared in market. Fiber Reinforced Polymer (FRP strengthening techniques established a good position among all other techniques, giving excellent structural results, low time required and moderate cost compared with the other techniques. The main purpose of this research is to study analytically the strengthening of a reinforced concrete bridge slabs due to excessive loads, using externally bonded FRP sheets technique. A commercial finite element program ANSYS was used to perform a structural linear and non-linear analysis for strengthened slab models using several schemes of FRP sheets. A parametric study was performed to evaluate analytically the effect of changing both FRP stiffness and FRP schemes in strengthening RC slabs. Comparing the results with control slab (reinforced concrete slab without strengthening it is obvious that attaching FRP sheets to the RC slab increases its capacity and enhances the ductility/toughness.

  14. Multi-level nonlinear modeling verification scheme of RC high-rise wall buildings

    Alwaeli, W.; Mwafy, A.; Pilakoutas, K.; Guadagnini, M.

    2017-01-01

    Earthquake-resistant reinforced concrete (RC) high-rise wall buildings are designed and detailed to respond well beyond the elastic range under the expected earthquake ground motions. However, despite their considerable section depth, in terms of analysis, RC walls are still often treated as linear elements, ignoring the effect of deformation compatibility. Due to the limited number of available comprehensive experimental studies on RC structural wall systems subjected to cycling loading, few...

  15. Comparison between digital subtraction angiography and magnetic resonance angiography in investigation of nonlacunar ischemic stroke in young patients: preliminary results Comparação entre arteriografia digital e angioressonância na investigação de acidente vascular cerebral isquêmico não-lacunar em pacientes jovens: resultados preliminares

    Adriana Bastos Conforto

    2006-06-01

    Full Text Available PURPOSE: We preliminarily investigated the relevance of performing digital subtraction angiography (DSA in addition to magnetic resonance angiography (MRA in definition of ischemic stroke etiology in young patients. METHOD: DSAs and MRAs from 17 young patients with nonlacunar ischemic stroke were blindly analyzed and their impact on stroke management was evaluated. RESULTS: Etiologies were the same considering results of either DSA or MRA in 12/17 cases. In 15/17 patients no changes would have been made in treatment, regardless of the modality of angiography considered. CONCLUSION: These preliminary results suggest that DSA may be redundant in two thirds of ischemic strokes in young patients. Further larger prospective studies are necessary to determine indications of DSA in this age group.PROPÓSITO DO ESTUDO: Investigar de forma preliminar a relevância da realização de angiografia digital (AD adicionalmente a angioressonância (AR na definição de etiologias de acidente vascular cerebral isquêmico (AVCI em pacientes jovens. MÉTODO: ADs e ARs de 17 pacientes jovens com AVCIs não-lacunares foram analisadas. Avaliamos o impacto destes exames no manejo clínico dos casos. RESULTADOS: Em 12/17 casos, as etiologias dos AVCIs de acordo com os resultados de AD ou de AR foram idênticas. Em 15/17 pacientes, nenhuma mudança de conduta terapêutica seria realizada, independentemente da modalidade de exame considerada. CONCLUSÃO: Estes resultados preliminares sugerem que os resultados da AD podem ser redundantes em relação à AR em até dois terços dos pacientes jovens com AVCI. Estudos prospectivos maiores são necessários para otimizar o estabelecimento de indicações de AD nesta faixa etária.

  16. An enhanced chaotic key-based RC5 block cipher adapted to image encryption

    Faragallah, Osama S.

    2012-07-01

    RC5 is a block cipher that has several salient features such as adaptability to process different word lengths with a variable block size, a variable number of rounds and a variable-length secret key. However, RC5 can be broken with various attacks such as correlation attack, timing attack, known plaintext correlation attack and differential attacks, revealing weak security. We aimed to enhance the RC5 block cipher to be more secure and efficient for real-time applications while preserving its advantages. For this purpose, this article introduces a new approach based on strengthening both the confusion and diffusion operations by combining chaos and cryptographic primitive operations to produce round keys with better pseudo-random sequences. Comparative security analysis and performance evaluation of the enhanced RC5 block cipher (ERC5) with RC5, RC6 and chaotic block cipher algorithm (CBCA) are addressed. Several test images are used for inspecting the validity of the encryption and decryption algorithms. The experimental results show the superiority of the suggested enhanced RC5 (ERC5) block cipher to image encryption algorithms such as RC5, RC6 and CBCA from the security analysis and performance evaluation points of view.

  17. Data of evolutionary structure change: 1ONAD-2D3RC [Confc[Archive

    Full Text Available 1ONAD-2D3RC 1ONA 2D3R D C ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLKT------NALHFMFNQFSKDQKDLILQGDAT... 1ONA D 1ONAD TRVSSN

  18. Digital broadcasting

    Park, Ji Hyeong

    1999-06-01

    This book contains twelve chapters, which deals with digitization of broadcast signal such as digital open, digitization of video signal and sound signal digitization of broadcasting equipment like DTPP and digital VTR, digitization of equipment to transmit such as digital STL, digital FPU and digital SNG, digitization of transmit about digital TV transmit and radio transmit, digital broadcasting system on necessity and advantage, digital broadcasting system abroad and Korea, digital broadcasting of outline, advantage of digital TV, ripple effect of digital broadcasting and consideration of digital broadcasting, ground wave digital broadcasting of DVB-T in Europe DTV in U.S.A and ISDB-T in Japan, HDTV broadcasting, satellite broadcasting, digital TV broadcasting in Korea, digital radio broadcasting and new broadcasting service.

  19. Zpracování telemetrických údajů RC modelů letadel

    Žák, Tomáš

    2012-01-01

    Bakalářská práce se zaměřuje na problematiku snímání stavu RC modelu letadla, během letu. Je zde detailně rozebrána vnější tak i vnitřní struktura, včetně komunikace. Cílem práce je navrhnutí funkční desky pro snímání stavu RC letadla během letu, k tomu je použita součástka akcelerometr umožňující snímat stav. V digitální podobě je pak následně přeposílá k vyhodnocení do mikrokontroléru. V příloze je uvedeno celkové schéma zapojení včetně seznamu použitých součástek. Bachelor’s project foc...

  20. Design of the RTO/RC ITER primary pumping system

    Ladd, P.; Ibbott, C; Janeschitz, G.; Martin, E.

    2000-01-01

    The primary pumping system is needed not only to exhaust helium ash resulting from the DT reaction but also excess fuelling gas injected during the fusion burn, which can extend for 100's to 1000's of seconds, and to perform a variety of other functions. The prevailing environmental conditions, principally nuclear radiation, tritium exposure, magnetic fields, and the need for containment, have a significant impact on the design and selection of equipment. This paper presents the design of the Reduced Technical Objectives/Reduced Cost (RTO/RC) ITER primary pumping system with particular emphasis on the nuclear aspects of the design. Component selection and equipment layout issues to meet established requirements for the system are reviewed together with the R and D that is being undertaken to support the design. In addition, serviceability and maintainability issues related to this system are also discussed

  1. Status of blanket design for RTO/RC ITER

    Yamada, M.; Ioki, K.; Cardella, A.; Elio, F.; Miki, N.

    2000-01-01

    Design has progressed on the FW/blanket for the RTO/RC (reduced technical objective/ reduced cost) ITER. The basic functions and structures are the same as for the 1998 ITER design. However, design and fabrication methods of the FW/blanket have been improved to achieve ∝ 50% reduction of the construction cost compared to that for the 1998 ITER design. Detailed blanket module designs with flat separable FW panels have been developed to reduce the fabrication cost and the future radioactive waste. Most of the R and D performed so far during the EDA (engineering design activity) is still applicable. Further cost reduction methods are also being investigated and additional R and D is being performed. (orig.)

  2. Present and future activities of TRIGA RC-1 Reactor

    Festinesi, A.

    1986-01-01

    A summary of reactor activities is presented and discussed. The RC-1 reactor is used by ENEA's laboratories, research institutes and national industries for different aims: research, analysis materials behaviour under neutron flux, etc. To satisfy the requests increase it is important to signalize: - the realization of a new radiochemical laboratory for radioisotopes production, to be used in a medical and/or diagnostic field in general; - the realization of a tritium handling laboratory, to study tritium solubility, release and diffusion in different material (particularly in ceramic breeder as lithium aluminate) to support Italian programs on fusion technology; - a research activity on the reactors computerized control by a console of advanced conception. The aim of this activity is the development of an ergonomic control room that could be a reference point for the planning of the power reactor control rooms

  3. SOIL STRUCTURE INTERACTION EFFECTS ON MULTISTOREY R/C STRUCTURES

    Muberra ESER AYDEMIR

    2013-01-01

    Full Text Available This paper addresses the behavior of multistorey structures considering soil structure interaction under earthquake excitation. For this purpose, sample 3, 6, 9 storey RC frames are designed based on Turkish Seismic Design Code and analyzed in time domain with incremental dynamic analysis. Strength reduction factors are investigated for generated sample plane frames for 64 different earthquake motions recorded on different site conditions such as rock, stiff soil, soft soil and very soft soil. According to the analysis result, strength reduction factors of sample buildings considering soil structure interaction are found to be almost always smaller than design strength reduction factors given in current seismic design codes, which cause an unsafe design and nonconservative design forces.

  4. EXTERNAL PRESTRESSING OF RC T-BEAMS WITH CFRP TENDONS

    Bennitz, Anders; Schmidt, Jacob Wittrup; Täljsten, Björn

    2009-01-01

    FRPs is about to become common practice. Several guidelines on the subject have been presented during the last decade, e.g. [1-5]. Next step is to further utilize the excellent behaviour of the advanced material, in particular CFRP (Carbon Fiber Reinforced Polymers). CFRPs have mechanical properties...... capacity could be increased, with a carefully applied compressive stress existing open cracks in concrete may be partly closed and it might also be possible to reduce large deflections. In that way the durability of the entire RC (Reinforced Concrete) -structure can be increased. Application of FRPs......As the acceptance for non-stressed FRP (Fibre Reinforced Polymers) increase steadily in the construction industry, the industries susceptibility for new ideas in the material’s usage increase. Improving the performance of a bridge, a parking garage or a multistory building by the use of appropriate...

  5. Design Optimization of Hybrid FRP/RC Bridge

    Papapetrou, Vasileios S.; Tamijani, Ali Y.; Brown, Jeff; Kim, Daewon

    2018-04-01

    The hybrid bridge consists of a Reinforced Concrete (RC) slab supported by U-shaped Fiber Reinforced Polymer (FRP) girders. Previous studies on similar hybrid bridges constructed in the United States and Europe seem to substantiate these hybrid designs for lightweight, high strength, and durable highway bridge construction. In the current study, computational and optimization analyses were carried out to investigate six composite material systems consisting of E-glass and carbon fibers. Optimization constraints are determined by stress, deflection and manufacturing requirements. Finite Element Analysis (FEA) and optimization software were utilized, and a framework was developed to run the complete analyses in an automated fashion. Prior to that, FEA validation of previous studies on similar U-shaped FRP girders that were constructed in Poland and Texas is presented. A finer optimization analysis is performed for the case of the Texas hybrid bridge. The optimization outcome of the hybrid FRP/RC bridge shows the appropriate composite material selection and cross-section geometry that satisfies all the applicable Limit States (LS) and, at the same time, results in the lightest design. Critical limit states show that shear stress criteria determine the optimum design for bridge spans less than 15.24 m and deflection criteria controls for longer spans. Increased side wall thickness can reduce maximum observed shear stresses, but leads to a high weight penalty. A taller cross-section and a thicker girder base can efficiently lower the observed deflections and normal stresses. Finally, substantial weight savings can be achieved by the optimization framework if base and side-wall thickness are treated as independent variables.

  6. Avaliação de quatro métodos de visualização de imagens digitais em odontologia =Evaluation of four methods of digital image display in dentistry

    Mazziero, Ênio Tonani

    2006-01-01

    Full Text Available Baseado nos grandes benefícios que a utilização das imagens digitais pode proporcionar a Odontologia, o objetivo deste trabalho foi comparar a qualidade de quatro métodos de visualização de imagens em Odontologia. Foram selecionados quatro slides 35 mm de pacientes da Faculdade de Odontologia da Pontifícia Universidade Católica de Minas Gerais. Os diapositivos foram digitalizados por quatro recursos e, posteriormente, as imagens foram processadas para serem visualizadas por quatro métodos: (1 revelação digital em papel fotográfico; (2 impressão em papel fotográfico com impressora jato de tinta amadora; (3 tela de computador e (4 projetor de multimídia. Posteriormente, essas imagens foram submetidas à avaliação de quinze indivíduos, sorteados aleatoriamente, divididos em cinco grupos. Para cada imagem avaliada, os examinadores julgavam se estas eram aceitáveis ou não do ponto de vista clínico e científico e analisavam quatro variáveis: (a brilho e contraste; (b definição e nitidez; (c fidelidade e reprodução de cores e (d nota geral, aferindo uma nota de zero a cinco para cada quesito. Encontrou-se um alto grau de aceitabilidade de 82,9% das imagens sem diferença estatisticamente significante entre elas. Foi identificado que o grupo de imagens impressas em impressora amadora em todos os quesitos posicionou-se no grupo com valores inferiores, enquanto o grupo de imagens visualizadas na tela de computador apresentou resultados superiores na maioria dos quesitos (p Since the use of digital images in Dentistry discloses a lot of advantages, this paper intended to evaluate four methods of image visualization in Dentistry. Four 35 mm slides with different quality were selected from the archive of the Minas Gerais Pontifical Catholic University Dental School. The slides were digitally converted by four methods and all images were prepared to be displayed by four methods: (1 digital print done in professional lab; (2 printed

  7. MASH Test 3-11 on the T131RC Bridge Rail

    2012-10-01

    Texas Department of Transportation (TxDOT) currently uses the TxDOT Type T101RC Bridge Rail, : a steel post and beam bridge rail anchored to the top of concrete curbs. The T101RC Bridge Rail is : 27 inches in height and can be anchored to the top of ...

  8. The RC Circuit: An Approach with Fourier Transforms In this article ...

    CLASSROOM. Mitrajyoti Ghosh. 83, Mitrapara 2nd Lane, Harinavi,. Kolkata 700148, West Bengal,. India. Email: mijospeakingnow@gmail.com. The RC Circuit: An Approach with Fourier Transforms. In this article we shall mathematically analyse the Resistor-. Capacitor (RC) circuit with the help of Fourier transforms. (FT).

  9. SPED – Sistema Público de Escrituração Digital: Percepção dos contribuintes em relação os impactos de sua adoção

    Maria Do Carmo Romeiro

    2011-08-01

    Full Text Available O Governo brasileiro inspirou-se em modelos de Governos Eletrônicos de países como Espanha, Chile e México, entre outros, para a criação do Sistema Público de Escrituração Digital (SPED, entrando na era digital. A pesquisa exploratória desenvolvida neste trabalho tem como objetivo verificar se houve nas empresas melhorias operacionais quando da adoção do SPED. Essas melhorias, tais como a redução de tempo na emissão de NF, diminuição de erros, maior agilidade e produtividade nos processos de recebimento e de transporte de mercadorias, além de diminuição nos gastos com papel e armazenagem de documentos e diminuição das obrigações acessórias são apontadas pelas autoridades governamentais como fatores positivos para as empresas. No tratamento dos dados, empregou-se a Estatística Bivariada – com medidas de associação entre duas variáveis nominais –, Coeficiente Phi e V de Cramer. Os resultados obtidos foram comparados a estudo semelhante efetuado no Chile e verificou-se que os contribuintes brasileiros têm perspectivas diversas dos chilenos. Os respondentes não obtiveram resultados satisfatórios em termos de redução no tempo de emissão de uma nota fiscal, agilidade e produtividade no recebimento de mercadorias ou redução na aquisição de papel. Muitos têm a perspectiva de que terão benefícios no futuro, principalmente em relação à diminuição dos riscos de fraudes e dos custos operacionais.

  10. Desenvolvimento rural e sociedade da informação em Portugal. Análise do fosso digital de segunda geração na região Norte

    Francisco Armas

    2015-06-01

    Full Text Available A difusão das tecnologias da informação e da comunicação estiveram muito presentes nas políticas regionais da União Europeia nas duas últimas décadas. Inicialmente, o objetivo centrava-se em “conectar” a população à Internet e estabelecer redes de telecomunicações que permitissem a acesso à Internet através de banda larga. Hoje em dia, e a grande escala, este objetivo foi alcançado em grande parte da União Europeia, contudo a difusão da Sociedade da Informação vai além dos simples “utilizadores de Internet”. No presente artigo estuda-se a dimensão de um novo fosso digital no Norte de Portugal, que separa os utilizadores básicos da Internet dos que consomem serviços avançados. A utilização destes serviços avançados seria fulcral para estimular as áreas rurais.

  11. Development of an Improved Crack Propagation Model for Corrosion-Induced Cover Cracking in RC Structures

    Hilyati, S.; Nizam, Z. M.; Zurisman, M. A. A.; Azhar, A. T. S.

    2017-06-01

    During the last two decades, reinforced concrete (RC) has been extensively used in most of the world as one of the common construction material due to its advantages and durability. However, RC structures exposed to marine environments are subjected to chloride attack. Chlorides from seawater penetrate into RC structures are not only causing severe corrosion problems but also affect the durability and serviceability of such structures. This paper investigates the influence of transverse reinforcement and spacing of reinforcing bars on concrete cover cracking of two-way RC slab specimens using accelerated corrosion tests. The experimental program involved the testing of four RC slab specimens and was generally designed to observe the crack width and the time of crack to propagate. An improved model for predicting the timing of crack propagation based on the experimental data was then developed.

  12. Observation of damage process in RC beams under cucle bending by acoustic emission

    Shigeishi, Mitsuhiro; Ohtsu, Masayasu; Tsuji, Nobuyuki; Yasuoka, Daisuke

    1997-01-01

    Reinforced concrete (RC) structures are generally applied to construction of buildings and bridges, and are imposed on cyclic loading incessantly. It is considered that detected acoustic emission (AE) waveforms are associated with the damage degree and the fracture mechanisms of RC structures. Therefor, the cyclic bending tests are applied to damaged RC beam specimens. To evaluate the interior of the damaged RC beams, the AE source kinematics are determined by 'SiGMA' procedure for AE moment tensor analysis. By using 'SiGMA' procedure, AE source kinematics, such as source locations, crack types, crack orientations and crack motions, can be identified. The results show the applicability to observation of the fracture process under cyclic bending load and evaluation the degree of damage of RC beam.

  13. Research on the Fatigue Flexural Performance of RC Beams Attacked by Salt Spray

    Mao, Jiang-hong; Xu, Fang-yuan; Jin, Wei-liang; Zhang, Jun; Wu, Xi-xi; Chen, Cai-sheng

    2018-04-01

    The fatigue flexural performance of RC beams attacked by salt spray was studied. A testing method involving electro osmosis, electrical accelerated corrosion and salt spray was proposed. This corrosion process method effectively simulates real-world salt spray and fatigue loading exerted by RC components on sea bridges. Four RC beams that have different stress amplitudes were tested. It is found that deterioration by corrosion and fatigue loading reduces the fatigue life of the RC and decreases the ability of deformation. The fatigue life and deflection ability could be reduced by increasing the stress amplitude and the corrosion duration time. The test result demonstrates that this experimental method can couple corrosion deterioration and fatigue loading reasonably. This procedure may be applied to evaluate the fatigue life and concrete durability of RC components located in a natural salt spray environment.

  14. X-ray irradiation of RC-MAP pre-stored for various numbers of days. Effect of X-ray irradiation on RC-MAP and reuse of RC-MAP after irradiation

    Yamada, Naotomo; Nagumo, Fumio; Kawasaki, Seiji; Matsuzaki, Miwako; Tadano, Jutaro

    1995-01-01

    X-ray irradiation is currently in wide use as a means of preventing post-transfusion graft-versus-host disease (PT-GVHD). In this study, we evaluated the effects of X-ray irradiation on RC-MAP pre-stored for various numbers of days, and assessed how long irradiated RC-MAP can be stored. RC-MAP was irradiated at a dosage of 15 Gy at 1, 7, 14, 21 or 28 days after blood collection. These specimens were referred to as group I, II, III, IV and V (X-ray-irradiated groups), respectively. Non-irradiated RC-MAP was used as the control. Results showed that plasma K concentration increased after X-ray irradiation. It is therefore advisable that RC-MAPs be used immediately in infants and in renal failure. However, to maximize the efficiency of blood product use, it seemed possible that groups I and II could be used within two weeks after irradiation, and group III within one week. On the basis of this increase in K concentration, however, groups IV and V plasma should be used immediately after irradiation. (author)

  15. Evaluation of average glandular dose in digital and conventional systems of the mammography; Avaliacao da dose glandular media em sistemas digitais e convencionais de mamografia

    Xavier, Aline C.S.; Barros, Vinicius S.M.; Khoury, Hellen J., E-mail: alinecx90@gmail.com, E-mail: vsmdbarros@gmail.com, E-mail: hjkhoury@gmail.com [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. de Energia Nuclear; Mello, Francisca A. de, E-mail: francissamello@yahoo.com.br [Hospital das Clinicas do Recife (HCR/UFPE), PE (Brazil)

    2014-07-01

    Mammography is currently the most effective method of diagnosis and detection of breast pathologies. The main interest in this kid of exam comes from the high incidence rate of breast cancer and necessity of high quality images for accurate diagnosis. Digital mammography systems have several advantages compared to conventional systems, however the use of digital imaging systems is not always integrated to an image acquisition protocol. Therefore, it is questionable if digital systems truly reduce the dose received by the patient, because many times is introduced in the clinics without optimization of the image acquisition protocols. The aim of this study is to estimate the value of incident air Kerma and average glandular dose (AGD) in patients undergoing conventional and digital mammography systems in Recife. This study was conducted with 650 patients in three hospitals. The value of incident air Kerma was estimated from the measurement of the yield of equipment and irradiation parameters used for each patient. From these results and using the methodology proposed by Dance et al. the value of the average glandular dose was calculated. The results obtained show that the lowest value of AGD was found with conventional screen-film system, indicating that the parameters for image acquisition with digital systems are not optimized. It was also observed that the institutions with digital systems use lower breast compression values than the conventional. (author)

  16. The cross-sectional area of the superficial digital flexor tendon of trained and untrained Thoroughbred racehorses Área transversal do tendão flexor digital superficial de cavalos Puro Sangue Inglês de corrida em treinamento e sem treinamento

    Ana Guiomar Matos Santiago Reis

    2010-08-01

    Full Text Available Twenty Thoroughbred racehorses were ultrasonographically evaluated to determine the relation between normal values of the cross-sectional area (CSA of the right and left forelimbs superficial digital flexor tendons (SDFT in the metacarpal region for trained and untrained Thoroughbreds racehorses. Ultrasonography revealed that CSA at 26cm distal to the accessory carpal bone is larger than other proximal levels, for either left or right forelimbs. In addition, the CSA at 2, 4, 6, 8, 10, 12 and 14cm distal to the accessory carpal bone of the left forelimb are larger (P0.05 between left and right forelimb for CSA of the SDFT, at any level, for either trained or untrained horses, and there was no significant difference between untrained or trained horses for the CSA of right forelimb. In conclusion, the CSA of the left forelimb SDFT for horses that had been in continuous race training remains larger when they were trained anticlockwise, contrary to horses that had not been training for more than one year.Vinte cavalos da raça Puro Sangue Inglês de corrida foram submetidos a exame ultrassonográfico, com o intuito de determinar a relação entre os valores normais da área do tendão flexor digital superficial (TFDS na região metacarpiana dos membros torácicos direito e esquerdo, em cavalos com e sem treinamento. O exame ultrassonográfico revelou que a área do tendão 26cm distal ao osso acessório do carpo é maior em comparação com as alturas proximais, tanto nos membros torácicos esquerdos, como nos membros torácicos direitos. Além disso, a área do TFDS nas alturas 2, 4, 6, 8, 10, 12 e 14cm, no membro torácico esquerdo, é maior (P0,05 nas áreas do TFDS entre os membros torácicos direito e esquerdo, tanto para os animais em treinamento, como para os animais sem treinamento. Também não foi encontrada diferença significativa em comparação com o membro direito dos cavalos em treinamento e sem treinamento. Conclui-se que os cavalos

  17. Comparative dermatology: acquired digital fibrokeratoma

    Cunha Filho, Roberto Rheingantz da

    2008-01-01

    Demonstra-se quadro característico de fibroqueratoma digital adquirido em trabalhadora rural de 42 anos de idade, que se compara a corno de rinoceronte.It is presented a case of a 42 year-old white female farmer with the classical feature of acquired digital fibrokeratoma, which is compared to rhinoceros horn.

  18. Oral-facial-digital syndrome with mesoaxial polysyndactyly, common ...

    Rabah M. Shawky

    2014-02-28

    Feb 28, 2014 ... Introduction. The Oral-facial-digital syndrome (OFDS) is a heterogeneous .... et al. [12] reported a common AV canal with pulmonary hyper- .... [16] Poretti A, Vitiello G, Hennekam RC, Arrigoni F, Bertini E, ... 2010;42(7):619–25.

  19. Efeitos de um processo de alfabetização em informática na cognição de idosos Effects of digital literacy process in elderly cognition

    Natália Nunes Scoralick-Lempke

    2012-01-01

    Full Text Available Para testar a hipótese de que um processo de alfabetização digital melhora as capacidades cognitivas de idosos, mais especificamente as memórias episódica e de trabalho, a meta-memória e a autoeficácia em memória, constituíram-se dois grupos experimentais (GE com, no total, 22 idosos que participaram de uma Oficina de Inclusão Digital. Esses construtos foram avaliados pré e pós-atividades, sendo que o desempenho do GE foi comparado ao de um grupo controle (GC com 16 participantes também idosos. Após 19 oficinas de duas horas cada, verificou-se que as alterações nos processos cognitivos dos participantes, observadas na presente investigação, não podem ser atribuídas a esse processo educacional. As limitações do quase experimento e as implicações sociais e científicas dos resultados são analisadas.In order to test the hypothesis that digital literacy skills improve the elderly cognitive performance, more specifically episodic and working memory, meta-memory, and auto-efficacy in memory, two experimental groups (EG were created. The groups were formed with a total of 22 elderly people who participated in a workshop on Digital Inclusion. The constructs were assessed in pre- and post-activities. EG performance was compared to a control group (CG composed by other 16 elderly participants. After 19 workshops of two hours each, the changes in cognitive processes of the elderly which were observed in this research cannot be assigned to the educational process evaluated. The limitations of the quasi experiment and scientific and social implications of the results are also analyzed.

  20. Enhanced resistance to stripe rust disease in transgenic wheat expressing the rice chitinase gene RC24.

    Huang, Xuan; Wang, Jian; Du, Zhen; Zhang, Chen; Li, Lan; Xu, Ziqin

    2013-10-01

    Stripe rust is a devastating fungal disease of wheat worldwide which is primarily caused by Puccinia striiformis f. sp tritici. Transgenic wheat (Triticum aestivum L.) expressing rice class chitinase gene RC24 were developed by particle bombardment of immature embryos and tested for resistance to Puccinia striiformis f.sp tritici. under greenhouse and field conditions. Putative transformants were selected on kanamycin-containing media. Polymease chain reaction indicated that RC24 was transferred into 17 transformants obtained from bombardment of 1,684 immature embryos. Integration of RC24 was confirmed by Southern blot with a RC24-labeled probe and expression of RC24 was verified by RT-PCR. Nine transgenic T1 lines exhibited enhanced resistance to stripe rust infection with lines XN8 and BF4 showing the highest level of resistance. Southern blot hybridization confirmed the stable inheritance of RC24 in transgenic T1 plants. Resistance to stripe rust in transgenic T2 and T3 XN8 and BF4 plants was confirmed over two consecutive years in the field. Increased yield (27-36 %) was recorded for transgenic T2 and T3 XN8 and BF4 plants compared to controls. These results suggest that rice class I chitinase RC24 can be used to engineer stripe rust resistance in wheat.

  1. The role of relational capital (RC in green supply chain management (GSCM

    Claudia Viviane Viegas

    2015-09-01

    Full Text Available Green Supply Chain Management (GSCM is an emergent issue in operations management. It is addressed to intra and inter-organizational practices adoption in order to promote sustainability in supply chains. Relational Capital (RC, also an emergent issue, plays a relevant role to resize views based solely in transactions costs and resources to a relationship view leaned on governance for information, trust and longevity in relationships, looking for positive results for all the chain’s participants. This article reviews and criticizes seminal literature on intangible assets in order to rescue RC features and link them to GSCM development. Through exploratory and descriptive methods, recent studies on RC and GSCM are identified with respect their descriptors – ways in which RC is understood and employed in GSCM; focus – goals and main use of RC; and directionality – if developments of RC in GSCM are addressed from producers to their suppliers and respective clients, or if suppliers and clients also address results of RC. It is concluded that, usually, there is unidirectionality in the application of such efforts: improvement initiatives go from the producer to the supplier or client development, but processes through which environmental practices of suppliers and clients influence the performance of GSCM are poor explored.

  2. Dynamic behavior and functional integrity tests on RC shear walls

    Akino, Kinji; Nasuda, Toshiaki; Shibata, Akenori.

    1991-01-01

    A project consisting of seven subprojects has been conducted to study the dynamic behavior and functional integrity of reinforced concrete (RC) shear walls in reactor buildings. The objective of this project is to obtain the data to improve and prepare the seismic analysis code regarding the nonlinear structural behavior and integrity of reactor buildings during and after earthquakes. The project started in April, 1986, and will end in March, 1994. Seven subprojects are strain rate test, damping characteristic test, ultimate state response test and the verification test for the test of restoring force characteristics regarding dynamic restoring force characteristics and damping performance; the restoring force characteristic test on the shear walls with openings; and pull-out strength test and the test on air leakage through concrete cracks regarding the functional integrity. The objectives of respective subprojects, the test models and the interim results are reported. Three subprojects have been completed by March, 1990. The results of these projects will be used for the overall evaluation. The strain rate test showed that the ultimate strength of shear walls increased with strain rate. A formula for estimating air flow through the cracks in walls was given by the leakage test. (K.I.)

  3. Seismic performance of existing R.C. framed buildings

    Sameh A. El-Betar

    2017-08-01

    Full Text Available The earthquakes disasters basically occur due to buildings damage not because of the earth shaking. Therefore, the countries have being updated the seismic codes. The seismic loads for buildings design in Egyptian Code have been changed from (EC-1994 to (ECP-201, 2012. On the other hand, the need is raised to study the vulnerability of existing buildings, which can be divided into the buildings designed to resist the gravity loads only (GLD and the buildings designed according to Egyptian code (EC-1994. Comparison between forces due to Egyptian code for loads (EC-1994 and (ECP-201, 2012 is carried out on the multi-stories R.C. framed buildings which are the most common type of existing buildings in Egypt. To investigate the vulnerability of existing buildings, nonlinear static pushover analysis is conducted to evaluate the real strength of the existing buildings. Moreover, it is considered a useful and effective tool for the performance of three framed buildings: 3, 6 and 10 stories due to expected future earthquakes. Finally, it is found that the vulnerability of existing GLD buildings occurs at expected ground accelerations (ag greater than 0.125 g in Egyptian seismic map, while the EC-94 designed buildings behave elastically up to (ag equals to 0.2 g and above that a slight damage may occur.

  4. Seismic Rehabilitation of RC Frames by Using Steel Panels

    Mowrtage, Waiel

    2008-07-01

    Every major earthquake in Turkey causes a large number of building suffer moderate damage due to poor construction. If a proper and fast retrofit is not applied, the aftershocks, which may sometimes come days or weeks after the main shock, can push a moderately damaged building into a major damage or even total collapse. This paper presents a practical retrofit method for moderately damaged buildings, which increases the seismic performance of the structural system by reducing the displacement demand. Fabricated steel panels are used for the retrofit. They are light-weight, easy to handle, and can be constructed very quickly. Moreover, they are cheap, and do not need formwork or skilled workers. They can be designed to compensate for the stiffness and strength degradation, and to fit easily inside a moderately damaged reinforced concrete frame. To test the concept, a half-scale, single-story 3D reinforced concrete frame specimen was constructed at the shake-table laboratories of the Kandilli Observatory and Earthquake Research Institute of Bogazici University, and subjected to recorded real earthquake base accelerations. The amplitudes of base accelerations were increased until a moderate damage level is reached. Then, the damaged RC frames was retrofitted by means of steel panels and tested under the same earthquake. The seismic performance of the specimen before and after the retrofit was evaluated using FEMA356 standards, and the results were compared in terms of stiffness, strength, and deformability. The results have confirmed effectiveness of the proposed retrofit scheme.

  5. Explicit expression for effective moment of inertia of RC beams

    K.A. Patel

    Full Text Available AbstractDeflection is an important design parameter for structures subjected to service load. This paper provides an explicit expression for effective moment of inertia considering cracking, for uniformly distributed loaded reinforced concrete (RC beams. The proposed explicit expression can be used for rapid prediction of short-term deflection at service load. The explicit expression has been obtained from the trained neural network considering concrete cracking, tension stiffening and entire practical range of reinforcement. Three significant structural parameters have been identified that govern the change in effective moment of inertia and therefore deflection. These three parameters are chosen as inputs to train neural network. The training data sets for neural network are generated using finite element software ABAQUS. The explicit expression has been validated for a number of simply supported and continuous beams and it is shown that the predicted deflections have reasonable accuracy for practical purpose. A sensitivity analysis has been performed, which indicates substantial dependence of effective moment of inertia on the selected input parameters.

  6. Finite element analysis of FRP-strengthened RC beams

    Teeraphot Supaviriyakit

    2004-05-01

    Full Text Available This paper presents a non-linear finite element analysis of reinforced concrete beam strengthened with externally bonded FRP plates. The finite element modeling of FRP-strengthened beams is demonstrated. Concrete and reinforcing bars are modeled together as 8-node isoparametric 2D RC element. The FRP plate is modeled as 8-node isoparametric 2D elastic element. The glue is modeled as perfect compatibility by directly connecting the nodes of FRP with those of concrete since there is no failure at the glue layer. The key to the analysis is the correct material models of concrete, steel and FRP. Cracks and steel bars are modeled as smeared over the entire element. Stress-strain properties of cracked concrete consist of tensile stress model normal to crack, compressive stress model parallel to crack and shear stress model tangential to crack. Stressstrain property of reinforcement is assumed to be elastic-hardening to account for the bond between concrete and steel bars. FRP is modeled as elastic-brittle material. From the analysis, it is found that FEM can predict the load-displacement relation, ultimate load and failure mode of the beam correctly. It can also capture the cracking process for both shear-flexural peeling and end peeling modes similar to the experiment.

  7. Seismic Rehabilitation of RC Frames by Using Steel Panels

    Mowrtage, Waiel

    2008-01-01

    Every major earthquake in Turkey causes a large number of building suffer moderate damage due to poor construction. If a proper and fast retrofit is not applied, the aftershocks, which may sometimes come days or weeks after the main shock, can push a moderately damaged building into a major damage or even total collapse. This paper presents a practical retrofit method for moderately damaged buildings, which increases the seismic performance of the structural system by reducing the displacement demand. Fabricated steel panels are used for the retrofit. They are light-weight, easy to handle, and can be constructed very quickly. Moreover, they are cheap, and do not need formwork or skilled workers. They can be designed to compensate for the stiffness and strength degradation, and to fit easily inside a moderately damaged reinforced concrete frame.To test the concept, a half-scale, single-story 3D reinforced concrete frame specimen was constructed at the shake-table laboratories of the Kandilli Observatory and Earthquake Research Institute of Bogazici University, and subjected to recorded real earthquake base accelerations. The amplitudes of base accelerations were increased until a moderate damage level is reached. Then, the damaged RC frames was retrofitted by means of steel panels and tested under the same earthquake. The seismic performance of the specimen before and after the retrofit was evaluated using FEMA356 standards, and the results were compared in terms of stiffness, strength, and deformability. The results have confirmed effectiveness of the proposed retrofit scheme

  8. Prediction of Cracking Induced by Indirect Actions in RC Structures

    Anerdi, Costanza; Bertagnoli, Gabriele; Gino, Diego; Malavisi, Marzia; Mancini, Giuseppe

    2017-10-01

    Cracking of concrete plays a key role in reinforced concrete (RC) structures design, especially in serviceability conditions. A variety of reasons contribute to develop cracking and its presence in concrete structures is to be considered as almost unavoidable. Therefore, a good control of the phenomenon in order to provide durability is required. Cracking development is due to tensile stresses that arise in concrete structures as a result of the action of direct external loads or restrained endogenous deformations. This paper focuses on cracking induced by indirect actions. In fact, there is very limited literature regarding this particular phenomenon if compared to its high incidence in the construction practice. As a consequence, the correct prediction of the crack opening, width and position when structures are subjected to imposed deformations, such as massive castings or other highly restrained structures, becomes a compelling task, not so much for the structural capacity, as for their durability. However, this is only partially addressed by commonly used design methods, which are usually intended for direct actions. A set of non-linear analysis on simple tie models is performed using the Finite Element Method in order to study the cracking process under imposed deformations. Different concrete grades have been considered and analysed. The results of this study have been compared with the provisions of the most common codes.

  9. Expected damages of retrofitted bridges with RC jacketing

    Montes, O.; Jara, J. M.; Jara, M.; Olmos, B. A.

    2015-07-01

    The bridge infrastructure in many countries of the world consists of medium span length structures built several decades ago and designed for very low seismic forces. Many of them are reinforced concrete structures that according to the current code regulations have to be rehabilitated to increase their seismic capacity. One way to reduce the vulnerability of the bridges is by using retrofitting techniques that increase the strength of the structure or by incorporating devices to reduce the seismic demand. One of the most common retrofit techniques of the bridges substructures is the use of RC jacketing; this research assesses the expected damages of seismically deficient medium length highway bridges retrofitted with reinforced concrete jacketing, by conducting a parametric study. We select a suite of twenty accelerograms of subduction earthquakes recorded close to the Pacific Coast in Mexico. The original structures consist of five 30 m span simple supported bridges with five pier heights of 5 m, 10 m, 15 m 20 and 25 m and the analyses include three different jacket thickness and three steel ratios. The bridges were subjected to the seismic records and non-linear time history analyses were carried out by using the OpenSEEs Plataform. Results allow selecting the reinforced concrete jacketing that better improves the expected seismic behavior of the bridge models.

  10. Expected damages of retrofitted bridges with RC jacketing

    Montes, O; Jara, J M; Jara, M; Olmos, B A

    2015-01-01

    The bridge infrastructure in many countries of the world consists of medium span length structures built several decades ago and designed for very low seismic forces. Many of them are reinforced concrete structures that according to the current code regulations have to be rehabilitated to increase their seismic capacity. One way to reduce the vulnerability of the bridges is by using retrofitting techniques that increase the strength of the structure or by incorporating devices to reduce the seismic demand. One of the most common retrofit techniques of the bridges substructures is the use of RC jacketing; this research assesses the expected damages of seismically deficient medium length highway bridges retrofitted with reinforced concrete jacketing, by conducting a parametric study. We select a suite of twenty accelerograms of subduction earthquakes recorded close to the Pacific Coast in Mexico. The original structures consist of five 30 m span simple supported bridges with five pier heights of 5 m, 10 m, 15 m 20 and 25 m and the analyses include three different jacket thickness and three steel ratios. The bridges were subjected to the seismic records and non-linear time history analyses were carried out by using the OpenSEEs Plataform. Results allow selecting the reinforced concrete jacketing that better improves the expected seismic behavior of the bridge models. (paper)

  11. Model tests on dynamic performance of RC shear walls

    Nagashima, Toshio; Shibata, Akenori; Inoue, Norio; Muroi, Kazuo.

    1991-01-01

    For the inelastic dynamic response analysis of a reactor building subjected to earthquakes, it is essentially important to properly evaluate its restoring force characteristics under dynamic loading condition and its damping performance. Reinforced concrete shear walls are the main structural members of a reactor building, and dominate its seismic behavior. In order to obtain the basic information on the dynamic restoring force characteristics and damping performance of shear walls, the dynamic test using a large shaking table, static displacement control test and the pseudo-dynamic test on the models of a shear wall were conducted. In the dynamic test, four specimens were tested on a large shaking table. In the static test, four specimens were tested, and in the pseudo-dynamic test, three specimens were tested. These tests are outlined. The results of these tests were compared, placing emphasis on the restoring force characteristics and damping performance of the RC wall models. The strength was higher in the dynamic test models than in the static test models mainly due to the effect of loading rate. (K.I.)

  12. Formulation development of retrocyclin 1 analog RC-101 as an anti-HIV vaginal microbicide product.

    Sassi, A B; Cost, M R; Cole, A L; Cole, A M; Patton, D L; Gupta, P; Rohan, L C

    2011-05-01

    RC-101 is a synthetic microbicide analog of retrocyclin, which has shown in vitro activity against X4 and R5 HIV-1. In an effort to develop a safe and effective RC-101 vaginal microbicide product, we assessed safety in ex vivo macaque and human models and efficacy using in vitro and ex vivo models. A polyvinyl-alcohol vaginal film containing RC-101 (100 μg/film) was developed. Formulation assessment was conducted by evaluating disintegration, drug content, mechanical properties, and stability. Efficacy was evaluated by in vitro peripheral blood mononuclear cells (PBMC) assay and ex vivo human ectocervical tissue explant model. Ex vivo safety studies were conducted by exposing RC-101 to an excised monkey reproductive tract and excised human ectocervical tissue. RC-101 100 μg films were shown to be safe to human and monkey tissue and effective against HIV-1 in vitro and ex vivo in human ectocervical tissue. The 90% inhibitory concentration (IC90) for RC-101 films at 2,000 μg (IC90=57.5 μM) using an ex vivo model was 10-fold higher than the IC90 observed using an in vitro model (IC90=5.0 μM). RC-101 films were stable for 1 month at 25°C, with in vitro bioactivity maintained for up to 6 months. RC-101 was developed in a quick-dissolve film formulation that was shown to be safe in an ex vivo model and effective in in vitro and ex vivo models. RC-101 film formulations were shown to maintain bioactivity for a period of 6 months. Findings from the present study contribute to the development of a safe and effective topical microbicide product.

  13. Estimation methods of deformational behaviours of RC beams under the unrestrained condition at elevated temperatures

    Kanezu, Tsutomu; Nakano, Takehiro; Endo, Tatsumi

    1986-01-01

    The estimation methods of free deformations of reinforced concrete (RC) beams at elevated temperatures are investigated based on the concepts of ACI's and CEB/FIP's formulas, which are well used to estimate the flexural deformations of RC beams at normal temperature. Conclusions derived from the study are as follows. 1. Features of free deformations of RC beams. (i) The ratios of the average compressive strains on the top fiber of RC beams to the calculated ones at the cracked section show the inclinations that the ratios once drop after cracking and then remain constant according to temperature rises. (ii) Average compressive strains might be estimated by the average of the calculated strains at the perfect bond section and the cracked section of RC beam. (iii) The ratios of the average tensile strains on the level of reinforcements to the calculated ones at the cracked section are inclined to approach the value of 1.0 monotonically according to temperature rises. The changes of the average tensile strains are caused by the deterioration of bond strength and cracking due to the increase of the differences of expansive strains between reinforcement and concrete. 2. Estimation methods of free deformations of RC beams. (i) In order to estimate the free deformations of RC beams at elevated temperatures, the basic concepts of ACI's and CEB/FIP's formulas are adopted, which are well used to estimate the M-φ relations of RC beams at normal temperature. (ii) It was confirmed that the suggested formulas are able to estimate the free deformations of RC beams, that is, the longitudinal deformation and the curvature, at elevated temperatures. (author)

  14. Efeito vasomotor após intoxicação aguda com bupivacaína e levobupivacaína via intraperitoneal em ratos, analisado por imagem infravermelha digital

    Angelo Manoel Grande Carstens

    2011-04-01

    Full Text Available JUSTIFICATIVA E OBJETIVOS: O estudo do efeito vasomotor dos anestésicos locais (AL é de suma importância para a análise da ocorrência de efeitos cardiotóxicos, neurotóxicos e interações medicamentosas. Com a finalidade de encontrar um fármaco mais seguro do que a bupivacaína racêmica, o presente estudo teve por objetivo a análise por imagem infravermelha digital do efeito vasomotor da intoxicação aguda da bupivacaína e da levobupivacaína via intraperitoneal em ratos. MÉTODO: Utilizaram-se 30 ratos machos da linhagem Wistar, alocados em três grupos (n = 10 e submetidos a uma injeção intraperitoneal de AL. No Grupo C (Controle, foi realizada injeção intraperitoneal de soro fisiológico 0,9% 1 mL. No Grupo B (bupivacaína, injeção intraperitoneal de bupivacaína racêmica a 0,5% (R50-S50, dose de 20 mg.kg-1 de peso. No Grupo L (levobupivacaína, injeção intraperitoneal de levobupivacaína a 0,5%, excesso enantiomérico (S75-R25 em dose de 20 mg.kg-1 de peso. Procedeu-se à filmagem termográfica contínua desde o momento da pré-injeção até 30 minutos após a injeção. Os resultados das filmagens foram analisados em forma gráfica, verificando-se a temperatura máxima de cada rato e a temperatura média do sistema que abrigava o animal. RESULTADOS: Os resultados da análise gráfica revelaram que não houve diferença entre o Grupo L e o Grupo C, e a temperatura média permaneceu estável durante todo o experimento em ambos os grupos. No Grupo B, houve um fenômeno de aumento de temperatura após a injeção intraperitoneal de bupivacaína. CONCLUSÕES: Os resultados demonstraram que o efeito vasomotor da toxicidade aguda da levobupivacaína foi semelhante ao Grupo C com soro fisiológico, por meio de estudos macroscópicos por filmagem digital infravermelha, e que houve alterações vasomotoras (vasoconstrição com a intoxicação por bupivacaína em relação ao Grupo C e em relação ao Grupo L.

  15. An optimum design of R-C oscillatory De-Qing circuit

    Cao Dezhang; Pan Linghe; Yang Tianlu

    1990-01-01

    An optimum design of R-C oscillatory De-Qing circuit has been developed for voltage regulation of the pulse modulator. When a new coefficient T 3 /T is introduced, the selection of De-Qing circuit parameters will become quite simple and the optimum parameters can be calculated directly. The De-Qing circuit parameters calculated will be effective in the whole range of the percentage regulation η from zero to maximum design value. The limit value of η is 0.36 or 0.29, theoretically, when the time constant of the De-Qing circuit is 3RC or 5RC respectively

  16. Cracking and Deformation Modelling of Tensile RC Members Using Stress Transfer Approach

    Ronaldas Jakubovskis

    2016-12-01

    Full Text Available The paper presents a modeling technique for bond, cracking and deformation analysis of RC members. The proposed mod-eling technique is not restricted by the geometrical dimensions of the analyzed member and may be applied for various load-ing conditions. Tensile as well as bending RC members may be analyzed using the proposed technique. Adequacy of the modeling strategy was evaluated by the developed numerical discrete crack algorithm, which allows modeling deformation and cracking behavior of tensile RC members. Comparison of experimental and numerical results proved the applicability of the proposed modeling strategy.

  17. Observations on out-of-plane behaviour of URM walls in buildings with RC slabs

    Tondelli, Marco; Beyer, Katrin

    2014-01-01

    In Switzerland many new residential buildings are constructed as unreinforced masonry (URM) structures or as mixed structures where URM walls are coupled with reinforced concrete (RC) walls by RC slabs. At present the boundary conditions of URM walls subjected to out-of-plane accelerations are still not well quantified. In the framework of a large research activity on RC-URM wall structures a shake-table test on a four-storey mixed structure was performed. The test specimen, which was built a...

  18. Avaliação de rugas cutâneas da região periorbital baseada em processamento digital de imagens /

    Brand, Vinicius Cubas

    2007-01-01

    Orientador: Hélio Pedrini Co-orientador: José Hermênio C.Lima Filho Inclui apêndice Dissertação (mestrado) - Universidade Federal do Paraná, Setor de Ciencias Exatas, Programa de Pós-Graduação em Informática. Defesa: Curitiba, 2007 Inclui bibliografia

  19. Concepção de interfaces para websites de bibliotecas universitárias: projeto, elaboração e gestão de informação em meio digital

    Alexandre Ribas Semeler

    2013-01-01

    Full Text Available Aborda o desenvolvimento e a implantação de websites para bibliotecas universitárias. Tem como objetivo investigar as ferramentas, as tecnologias e as metodologias necessárias para o projeto e a concepção de interfaces de websites. Discute o fluxo de trabalho e o desenvolvimento de websites, concentrando esforços no projeto, na elaboração e na gestão da informação em meio digital. Aponta aspectos necessários para o trabalho com projetos de design de navegação, identidade visual e implementação de sistemas de gerenciamento de conteúdo.

  20. An under-designed RC frame: Seismic assessment through displacement based approach and possible refurbishment with FRP strips and RC jacketing

    Valente, Marco; Milani, Gabriele

    2017-07-01

    Many existing reinforced concrete buildings in Southern Europe were built (and hence designed) before the introduction of displacement based design in national seismic codes. They are obviously highly vulnerable to seismic actions. In such a situation, simplified methodologies for the seismic assessment and retrofitting of existing structures are required. In this study, a displacement based procedure using non-linear static analyses is applied to a four-story existing RC frame. The aim is to obtain an estimation of its overall structural inadequacy as well as the effectiveness of a specific retrofitting intervention by means of GFRP laminates and RC jacketing. Accurate numerical models are developed within a displacement based approach to reproduce the seismic response of the RC frame in the original configuration and after strengthening.

  1. Digital PIV (DPIV) Software Analysis System

    Blackshire, James L.

    1997-01-01

    A software package was developed to provide a Digital PIV (DPIV) capability for NASA LaRC. The system provides an automated image capture, test correlation, and autocorrelation analysis capability for the Kodak Megaplus 1.4 digital camera system for PIV measurements. The package includes three separate programs that, when used together with the PIV data validation algorithm, constitutes a complete DPIV analysis capability. The programs are run on an IBM PC/AT host computer running either Microsoft Windows 3.1 or Windows 95 using a 'quickwin' format that allows simple user interface and output capabilities to the windows environment.

  2. Experiment and simulation of double-layered RC plates under impact loadings. Part 1: Impact tests for double-layered RC plates

    Shirai, T.; Ueda, M.; Taniguchi, H.; Kambayashi, A.; Ohno, T.; Ishikawa, N.

    1993-01-01

    At a nuclear power plant facility, it should be of interest and important problem to ensure structures against impact loads induced by projectile impacts or plant-internal accidents. It has been well known that local damage consists of spalling of concrete from the impacted area and scabbing of concrete from the back face of the target together with projectile penetration into the target. There are several techniques for improving the impact resistance of RC slabs, that is, lining with a steel plate on the impacted and/or rear face of the slab, making the slab a double-layered composite slab with an elastic absorber and employing a fiber reinforced concrete or a high-strength concrete as the slab materials. Of the many measures available for withstanding impact loads, the use of a double-layered reinforced concrete (RC) slab with absorber is expected to have the higher resistance in reducing or preventing local damage. This paper presents the results of an experimental investigation on the impact resistance of double-layered RC plates subjected to the impact of projectile. In the experiment, the effects of two parameters; the combination of two RC plates having different thicknesses and the existence of an absorber in the middle layer, are mainly investigated. And, the effects of the concrete thickness (7,9 and 11 cm) and the concrete strength (a normal-:35MPa, a lightweight-:40MPa and a high-strength:57MPa) of target were also examined. RC plates, 0.6m-square, were used for test specimens. The projectile has a mass of 0.43kg, made of steel with a flat nose. An average projectile velocity was about 170m/sec. A rubber plate shaped into a square with the same size of RC plate was used for a double-layered specimen as an absorber which was put between two RC plates. It could be concluded that double-layering and presence of an absorber had a considerable effect on the increase of impact resistance of RC plate. In order to reduce local damage, it is more effective to

  3. Advanced field-solver techniques for RC extraction of integrated circuits

    Yu, Wenjian

    2014-01-01

    Resistance and capacitance (RC) extraction is an essential step in modeling the interconnection wires and substrate coupling effect in nanometer-technology integrated circuits (IC). The field-solver techniques for RC extraction guarantee the accuracy of modeling, and are becoming increasingly important in meeting the demand for accurate modeling and simulation of VLSI designs. Advanced Field-Solver Techniques for RC Extraction of Integrated Circuits presents a systematic introduction to, and treatment of, the key field-solver methods for RC extraction of VLSI interconnects and substrate coupling in mixed-signal ICs. Various field-solver techniques are explained in detail, with real-world examples to illustrate the advantages and disadvantages of each algorithm. This book will benefit graduate students and researchers in the field of electrical and computer engineering, as well as engineers working in the IC design and design automation industries. Dr. Wenjian Yu is an Associate Professor at the Department of ...

  4. Direct Observation of Energy Detrapping in LH1-RC Complex by Two-Dimensional Electronic Spectroscopy.

    Ma, Fei; Yu, Long-Jiang; Hendrikx, Ruud; Wang-Otomo, Zheng-Yu; van Grondelle, Rienk

    2017-01-18

    The purple bacterial core light harvesting antenna-reaction center (LH1-RC) complex is the simplest system able to achieve the entire primary function of photosynthesis. During the past decade, a variety of photosynthetic proteins were studied by a powerful technique, two-dimensional electronic spectroscopy (2DES). However, little attention has been paid to LH1-RC, although its reversible uphill energy transfer, trapping, and backward detrapping processes, represent a crucial step in the early photosynthetic reaction dynamics. Thus, in this work, we employed 2DES to study two LH1-RC complexes of Thermochromatium (Tch.) tepidum. By direct observation of detrapping, the complex reversible process was clearly identified and an overall scheme of the excitation evolution in LH1-RC was obtained.

  5. Noise analysis of gate electrode work function engineered recessed channel (GEWE-RC) MOSFET

    Agarwala, Ajita; Chaujar, Rishu

    2012-01-01

    This paper discusses the noise assessment, using ATLAS device simulation software, of a gate electrode work function engineered recessed channel (GEWE-RC) MOSFET involving an RC and GEWE design integrated onto a conventional MOSFET. Furthermore, the behaviour of GEWE-RC MOSFET is compared with that of a conventional MOSFET having the same device parameters. This paper thus optimizes and predicts the feasibility of a novel design, i.e., GEWE-RC MOSFET for high-performance applications where device and noise reduction is a major concern. The noise metrics taken into consideration are: minimum noise figure and optimum source impedance. The statistical tools auto correlation and cross correlation are also analysed owing to the random nature of noise.

  6. A study on shear behavior of R/C beams subjected to long-term heating

    Maruta, M.; Yamazaki, M.

    1993-01-01

    In nuclear power plants, many structural members are subjected to long term heating. There are few experimental data available on the behavior especially in shear of reinforced concrete (R/C) members subjected to long term heating. This paper describes a study aimed at experimentally determining the shear behavior of R/C members in nuclear power plant facilities following sustained heating at high temperatures

  7. SEISMICALLY RETROFITTING AND UPGRADING RC-MRF BY USING EXPANDED METAL PANELS

    Phung Ngoc, Dung

    2011-01-01

    Reinforced concrete moment resisting frames (RC-MRFs) have been widely used as the main structural resisting systems for over 30 years based on their capacity in resisting both gravity loads and lateral forces like winds or earthquakes and on low cost of construction. However, there have been still many existing RC-MRFs not designed according to any modern seismic code. This may lead to some undesired failures under a rather low intensity earthquake. There are several existing retrofitting sy...

  8. Functional utilization of control and digital protection systems in distribution substations; Aproveitamento funcional de sistemas de controle e protecao digitais em subestacoes de distribuicao

    Brittes, Jose Luiz Pereira

    1996-07-01

    The application of Digital Protection and Control Systems (DPCS) in Utilities substations is a fundamental part for their Information System. Technological progress in Telematics provides nowadays, the implementation of open digital systems. But it is the wide exploitation of its potentiality that will be one of the survival factor in the competitive and multi-affair environment dictated by the new worldwide economical order. This exploitation is carried out in three levels inside the substation: at bay level, with inherent technological benefits, such as more efficient and reliable protection, data acquisition and registration, and smart control; at central level (substation), by the implantation of automatics with enormous operational and management profits; and a remote level, to whom DPCS's transpire like a very sophisticated large frame remote terminal units. (author)

  9. Functional utilization of control and digital protection systems in distribution substations; Aproveitamento funcional de sistemas de controle e protecao digitais em subestacoes de distribuicao

    Brittes, Jose Luiz Pereira

    1996-07-01

    The application of Digital Protection and Control Systems (DPCS) in Utilities substations is a fundamental part for their Information System. Technological progress in Telematics provides nowadays, the implementation of open digital systems. But it is the wide exploitation of its potentiality that will be one of the survival factor in the competitive and multi-affair environment dictated by the new worldwide economical order. This exploitation is carried out in three levels inside the substation: at bay level, with inherent technological benefits, such as more efficient and reliable protection, data acquisition and registration, and smart control; at central level (substation), by the implantation of automatics with enormous operational and management profits; and a remote level, to whom DPCS's transpire like a very sophisticated large frame remote terminal units. (author)

  10. Study on labelling methods of 125I-RC-160 and its biodistribution in animals

    Wang Jing; Wang Xiqing; Wang Liangang; Li Fujun; Deng Jinglan

    2002-01-01

    A method for the iodination of peptide RC-160 with high efficiency was developed. RC-160 was iodinated with N-bromosuccinimide (NBS) as oxidant, the conventional chloramine T (Ch-T) method was used as control. The labelling condition of NBS method was optimized and radiolabelled conjugate 125 I-RC-160 was assessed as follows: no further purification was needed, the measured labelling yield of 125 I-RC-160 was 92% and the specific activity was 1.95 x 10 12 Bq/m mol. The yield increased as the amount of NBS increased. The optimal ratio of RC-160 (μg): 125 I (MBq): NBS(μg) was 3:7.4:1. For Ch-T method, the labelling yield is 56% and specific activity was 0.65 x 10 12 Bq/m mol; but after purification by SepPak-C 18 , the labelling yield may reach as high as 92%. 1h after injection, radioactivity in blood decreased by 87.2%. No obvious concentration of 125 I-RC-160 in thyroid or kidney was observed

  11. High resistance (up to 1014 ohms) measurement using RC networks

    Florescu, Valeriu

    2008-01-01

    An application of dynamic measuring techniques of resistances from 10 6 to 10 14 ohms is described. The method has been analyzed with an eye to measuring accuracy, other influences of the actual measuring circuit also being considered. In conclusion, an automatic measuring method with A/D conversion, automatic range selection, and digital output in semilogarithmic form is outlined. It has been experimentally verified that the dynamic method of resistance measurement can be used for testing insulation resistance of materials and resistors. The great advantage of the automatic measuring circuit is that, apart from an easy automatic selection of the measuring range, digital output in semilogarithmic form ensures compatibility with digital computer systems and facilitates the grading in resistor manufacture. The time required for measuring resistances of the known order of magnitude does not exceed 1 s. Automatic selection of the order of magnitude speeds up the measurement of unknown resistances. For resistance measurement over the range of 10 6 to 10 14 ohms, the measuring accuracy of 1 to 2% is usually sufficient. The meter can be designed as an inexpensive attachment to a conventional counter. The principle of integration measurement avoids undesirable interference effects with which the conventional measuring methods are afflicted. Since the measuring voltage can be adjusted continuously, even the voltage dependence of resistance can be measured

  12. Land-cover classification with an expert classification algorithm using digital aerial photographs

    José L. de la Cruz

    2010-05-01

    Full Text Available The purpose of this study was to evaluate the usefulness of the spectral information of digital aerial sensors in determining land-cover classification using new digital techniques. The land covers that have been evaluated are the following, (1 bare soil, (2 cereals, including maize (<em>Zea maysem> L., oats (<em>Avena sativaem> L., rye (<em>Secale cereale em>L., wheat (<em>Triticum aestivum em>L. and barley (<em>Hordeun vulgareem> L., (3 high protein crops, such as peas (<em>Pisum sativumem> L. and beans (<em>Vicia fabaem> L., (4 alfalfa (<em>Medicago sativaem> L., (5 woodlands and scrublands, including holly oak (<em>Quercus ilexem> L. and common retama (<em>Retama sphaerocarpaem> L., (6 urban soil, (7 olive groves (<em>Olea europaeaem> L. and (8 burnt crop stubble. The best result was obtained using an expert classification algorithm, achieving a reliability rate of 95%. This result showed that the images of digital airborne sensors hold considerable promise for the future in the field of digital classifications because these images contain valuable information that takes advantage of the geometric viewpoint. Moreover, new classification techniques reduce problems encountered using high-resolution images; while reliabilities are achieved that are better than those achieved with traditional methods.

  13. Experimental investigation of the seismic performance of the R/C frames with reinforced masonry infills

    Tanjung, Jafril; Maidiawati, Nugroho, Fajar

    2017-10-01

    Intensive studies regarding the investigation of seismic performance of reinforced concrete (R/C) frames which are infilled with brick masonry walls have been carried out by several researchers within the last three-decades. According to authors' field and experimentally experiences conclude that the unreinforced brick masonry infills significantly contributes to increase the seismic performance of the R/C frame structure. Unfortunately, the presence of brick masonry infill walls causes several undesirable effects such as short column, soft-storey, torsion and out of plane collapse. In this study, a strengthening technique for the brick masonry infills were experimentally investigated to improve the seismic performance of the R/C frame structures. For this purpose, four experimental specimens have been prepared, i.e. one of bare R/C frame (BF), one of R/C frame infilled with unreinforced brick-masonry wall (IFUM) and two of R/C frames were infilled with reinforced brick-masonry wall (IFRM-1 and IFRM-2). The bare frame and R/C frame infilled with unreinforced brick-masonry wall represents the typical R/C buildings' construction in Indonesia assuming the brick-masonry wall as the non-structural elements. The brick-masonry wall infills in specimens IFRM-1 and IFRM-2 were strengthened by using embedded ϕ4 plain steel bar on their diagonal and center of brick-masonry wall, respectively. All specimens were laterally pushed-over. The lateral loading and its lateral displacement, failure mechanism and their crack pattern were recorded during experimental works. Comparison of the experimental results of these four specimens conclude that the strengthening of the brick-masonry infills wall gave the significantly increasing of the seismic performance of the R/C frame. The seismic performance was evaluated based on the lateral strength of the R/C specimen. The embedded plain steel bar on brick-masonry also reduces the diagonal crack on the brick-masonry wall. It seems that

  14. Estimativa da área foliar de meloeiro em estádios fenológicos por fotos digitais Estimate of the leaf area of melon plant in growing stages for digital photos

    Sidinei José Lopes

    2007-08-01

    Full Text Available O objetivo deste trabalho foi avaliar a precisão do método de fotos digitais na estimativa da área foliar de meloeiro e encontrar modelos matemáticos de estimativa da área foliar em função de medidas lineares da folha para diferentes estádios fenológicos. Foram fotografadas todas as folhas ímpares de 8 plantas após transplante definitivo, através de câmera fotográfica digital, resultando, durante todo o ciclo da cultura, em 4.188 fotos, das quais mediu-se a área foliar, o comprimento e a largura da folha, por meio do software Sigma Scan Pro v. 5.0, Jandel Scientific. Para verificar a precisão do método de fotos digitais, retirou-se uma amostra de 40 folhas, de onde foram obtidas a área foliar através do método padrão de discos foliares e pelo método de fotos. Foi encontrada uma correlação de 0,99 entre o método padrão (discos e o de fotos. O método de fotos digitais pode ser utilizado para estimar a área foliar da cultura de meloeiro, e a estimativa da área foliar de meloeiro por estádio fenológico apresenta maior precisão, sendo a maior variabilidade na estimativa da área da folha observada no período reprodutivo. A largura máxima da folha de meloeiro é a medida linear que melhor estima a área foliar.This experiment was aimed at evaluating the precision of digital photos in estimating the leaf area of watermelon plants and to find mathematical models that estimates leaf area as a function of leaf linear measurements at different growth stages. All odd leaves of eight plants were photographed after being established on the field using a digital camera that resulted in 4,188 photos in which length and width were measured using a Sigma Scan Pro v. 5.0 Jandel Scientific software. In order to estimate the precision of the digital photos method, a sample consisting of 40 leaves was taken and leaf area measured using the standard leaf disks and the photo method. A 0.99 correlation coefficient was detected between

  15. Field-Deployable Acoustic Digital Systems for Noise Measurement

    Shams, Qamar A.; Wright, Kenneth D.; Lunsford, Charles B.; Smith, Charlie D.

    2000-01-01

    Langley Research Center (LaRC) has for years been a leader in field acoustic array measurement technique. Two field-deployable digital measurement systems have been developed to support acoustic research programs at LaRC. For several years, LaRC has used the Digital Acoustic Measurement System (DAMS) for measuring the acoustic noise levels from rotorcraft and tiltrotor aircraft. Recently, a second system called Remote Acquisition and Storage System (RASS) was developed and deployed for the first time in the field along with DAMS system for the Community Noise Flight Test using the NASA LaRC-757 aircraft during April, 2000. The test was performed at Airborne Airport in Wilmington, OH to validate predicted noise reduction benefits from alternative operational procedures. The test matrix was composed of various combinations of altitude, cutback power, and aircraft weight. The DAMS digitizes the acoustic inputs at the microphone site and can be located up to 2000 feet from the van which houses the acquisition, storage and analysis equipment. Digitized data from up to 10 microphones is recorded on a Jaz disk and is analyzed post-test by microcomputer system. The RASS digitizes and stores acoustic inputs at the microphone site that can be located up to three miles from the base station and can compose a 3 mile by 3 mile array of microphones. 16-bit digitized data from the microphones is stored on removable Jaz disk and is transferred through a high speed array to a very large high speed permanent storage device. Up to 30 microphones can be utilized in the array. System control and monitoring is accomplished via Radio Frequency (RF) link. This paper will present a detailed description of both systems, along with acoustic data analysis from both systems.

  16. Sentidos de "digital" em disputa no currículo de história: que implicações para o ensino desta disciplina?

    Marcella Albaine Farias da Costa

    2014-09-01

    Full Text Available Este texto admite como base inicial de reflexão as muitas articulações que já se fizeram no campo educacional em torno dos significantes ‘ensino’ e ‘tecnologia’, em geral, fixando sentidos ligados à ideia de ‘inovação’, ‘afinamento com os novos tempos’ e/ou ‘facilitador da aprendizagem’. No caso da disciplina História, fala-se recorrentemente que a utilização das chamadas tecnologias da informação e da comunicação (TICs pode gerar novas práticas, indo de encontro ao tão combatido ensino ‘tradicional’, ligado à ‘lógica da memorização’. Sem refutar ou corroborar tais afirmativas, e amparando-se nas contribuições das teorizações do discurso formuladas por Ernesto Laclau e Chantal Mouffe, a análise procura mostrar que fixar e disputar ‘sentidos de digital’ no currículo de História é uma ação política, que mobiliza/desloca a fronteira da própria definição do que é e do que não é a ciência/conhecimento histórico na contemporaneidade, provocando alterações, portanto, tanto na cultura histórica, quanto na cultura escolar. Tendo como empiria o Edital do Programa Nacional do Livro Didático (PNLD 2015, entendido como texto curricular, o estudo evidencia e problematiza a forma como as disputas em torno da significação e fixação de ‘sentidos de digital’ têm aparecido na área de História, produzindo deslocamentos em meio às práticas articulatórias que fixam sentido para a interface ‘ensino’-‘tecnologia’. Palavras-chave: História – estudo e ensino; Currículo

  17. Methodology for the construction of a physical phantom for quality control of images in digital radiography; Metodologia para a construcao de um fantoma fisico para controle de qualidade de imagens em radiografia digital

    Santos, Tayline T.; Vieira, Jose Wilson, E-mail: aylinetyene@hotmail.com, E-mail: jose.wilson59@uol.com.br [Instituto Federal de Educacao, Ciencia e Tecnologia de Pernambuco (IFFPE), Recife, PE (Brazil); Oliveira, Alex Cristovao H. de; Lima, Fernando R. de Andrade, E-mail: oliveira_ach@yahoo.com, E-mail: falima@cnen.gov.br [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil); Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-PE), Recife, PE (Brazil)

    2013-07-01

    The advancement of technology in recent years has provided the production of increasingly sophisticated devices, aiming to acquire medical images with high technical level and also facilitate the operational readiness of the equipment. In order to ensure the most accurate diagnosis with minimum dose without exposing patients to obtain data and verify the performance of a radiographic system for quality control purposes we use the so-called phantoms. Phantoms are physical or computational models used to simulate the transport of ionizing radiation, their interactions in the tissues of the human body and evaluate the deposition of energy. Besides, they are made from materials with behavior similar to human tissues when exposed to ionizing radiation - the so-called tissue-equivalent materials. This paper describes the construction of a physical phantom that allows the execution of the main acceptance tests of the quality control protocols in digital radiography.

  18. Avaliação digital comparativa da expressão tecidual da proteína cerbB-2 em mulheres portadoras de doenças tumorais da mama Comparative digital evaluation of tissue expression of the cerbB-2 protein in women with breast tumoral diseases

    Renata Kelly de Araújo Veiga

    2009-04-01

    Full Text Available A imuno-histoquímica (IHC para expressão da proteína Her-2/neu tornou-se um dos mais atrativos testes de rotina, devido a custo, conveniência e relevância biológica. Contudo, têm sido relatados problemas quanto à variabilidade das marcações em IHC, além da subjetividade na interpretação dos métodos de IHC convencionais. Assim, o presente estudo objetiva quantificar morfometricamente a imunomarcação da proteína cerbB-2 expressa em tumores de mama. Fragmentos de tecido mamário normal (n = 10 e com doença tumoral (carcinoma ductal invasivo [CDI], n = 51 e fibroadenoma, [FA], n = 21 foram fixados em formalina, submetidos à rotina histológica para inclusão em parafina. Cortes histológicos (4 µm, corados em hematoxilina e eosina foram examinados para confirmar o diagnóstico. Os cortes foram incubados em solução de anticorpo anti-cerbB-2 por 60 minutos em temperatura ambiente. A marcação foi visualizada após reação da peroxidase do cromógeno diaminobenzidina associado ao peróxido de hidrogênio. A análise morfométrica foi realizada utilizando uma estação de análise digital de imagens por meio do software de análise Optimas®. A partir dos resultados obtidos, pode-se concluir que a superexpressão do cerbB-2 em casos de CDI é um fenômeno condizente com o estágio de proliferação das células neoplásicas e, quando analisados os casos de FA, esse marcador não exibiu qualquer correlação ou padrão específico; ao contrário, apresentaram resultados semelhantes ao tecido mamário normal. Não houve diferenças significativas entre os diferentes score qualitativos (1+, 2+ e 3+ e a análise morfométrica digital (áreas médias marcadas. Esses achados demonstram a necessidade de estudos mais acurados a fim de resolver essa dificuldade de interpretação.Immunohistochemistry for HER-2/neu protein expression has become the most attractive routine test due to its cost, convenience and biological relevance. However

  19. Gênero digital e seus propósitos comunicativos: uma análise em perfis pessoais de sites de relacionamento

    Wellington Carvalho de Arêa Leão

    2017-06-01

    ABSTRACT:It is investigated, in this written work, the emerging digital genre personal profile at social networking websites and the communicative purpose more frequent when the subjects propose themselves to use this type of genre. It is adopted in this sense, a socio-rhetorical perspective of genre analysis, considering that this has given a new meaning to the forms of relationships between people to the digital world, as it is presented in a Web-mediated way. The main theoretical basis is based in the study of discourse genres, by Bakhtin (2011, socio-rhetorical perspective, by Miller (2012, definitions of textual genres and communicative purposes, by Swales (1990 apud BIASI-RODRIGUES; BEZERRA, 2012 and Cavalcanti (2014 and the definitions and functionalities of the genre under analysis, by Leão (2015. This is a bibliographic research of qualitative approach with data analysis, in which 10 badoo.com.br profiles were selected, among which five belonging to the researcher's circle of friends and five of a fake female profile, created by him. The results show that the building of friendship ties is the most frequent and obvious communicative purpose when the users look for a dialogue with others at the studied social networking site. It was also found that the analyzed genre combines mixed communicative purposes, between a factual and a virtual reality, besides being a purpose that aims at a personal promotion in its support.

  20. Uso de replicação móvel para distribuição de vídeo digital em redes de computadores

    Alves, Renata Sofia Pinho de Aquino

    2003-01-01

    A maioria da soluções apresentadas como candidatas à implementação de serviços de distribuição de áudio e vídeo, têm sido projetadas levando-se em consideração determinadas condições de infra-estrutura, formato dos fluxos de vídeo a serem transmitidos, ou ainda os tipos de clientes que serão atendidos pelo serviço. Aplicações que utilizam serviços de distribuição de vídeo normalmente precisam lidar com grandes oscilações na demanda pelo serviço devido a entrada e saída de usuários do serviço....

  1. Upgrading the seismic capacity of existing RC buildings using buckling restrained braces

    Hamdy Abou-Elfath

    2017-06-01

    Full Text Available Many existing RC buildings do not meet the lateral strength requirements of current seismic codes and are vulnerable to significant damage or collapse in the event of future earthquakes. In the past few decades, buckling-restrained braces have become increasingly popular as a lateral force resisting system because of their capability of improving the strength, the stiffness and the energy absorbing capacity of structures. This study evaluates the seismic upgrading of a 6-story RC-building using single diagonal buckling restrained braces. Seismic evaluation in this study has been carried out by static pushover analysis and time history earthquake analysis. Ten ground motions with different PGA levels are used in the analysis. The mean plus one standard deviation values of the roof-drift ratio, the maximum story drift ratio, the brace ductility factors and the member strain responses are used as the basis for the seismic performance evaluations. The results obtained in this study indicate that strengthening of RC buildings with buckling restrained braces is an efficient technique as it significantly increases the PGA capacity of the RC buildings. The results also indicate the increase in the PGA capacity of the RC building with the increase in the amount of the braces.

  2. Evaluation of reuterin production in urogenital probiotic Lactobacillus reuteri RC-14.

    Cadieux, Peter; Wind, Anette; Sommer, Philip; Schaefer, Laura; Crowley, Kate; Britton, Robert A; Reid, Gregor

    2008-08-01

    Classified as a distinct species in 1980, Lactobacillus reuteri strains have been used in probiotic formulations for intestinal and urogenital applications. In the former, the primary mechanism of action of L. reuteri SD2112 (ATCC 55730) has been purported to be its ability to produce the antibiotic 3-hydroxypropionaldehyde (3-HPA), also known as reuterin. In the vagina, it has been postulated that probiotic Lactobacillus reuteri RC-14 does not require reuterin production but mediates a restoration of the normal microbiota via hydrogen peroxide, biosurfactant, lactic acid production, and immune modulation. The aim of the present study was to determine whether strain RC-14 produced reuterin. Using PCR and DNA dot blot analyses, numerous Lactobacillus species, including RC-14, were screened for the presence of the gene encoding the large subunit of glycerol dehydratase (gldC), the enzyme responsible for reuterin production. In addition, lactobacilli were grown in glycerol-based media and both high-performance liquid chromatography and a colorimetric assay were used to test for the presence of reuterin. L. reuteri RC-14 was determined to be negative for gldC sequences, as well as for the production of reuterin when cultured in the presence of glycerol. These findings support that the probiotic effects of L. reuteri RC-14, repeatedly demonstrated during numerous studies of the intestine and vagina, are independent of reuterin production.

  3. Eletrencefalograma digital com mapeamento em demência de Alzheimer e doença de Parkinson: estudo prospectivo controlado Digital EEG with brain mapping in Alzheimer's dementia and Parkinson's disease: a prospective controlled study

    Marcos C. Sandmann

    1996-03-01

    Full Text Available Com o intuito de estudar a atividade eletrencefalográfica em vigilia da demência senil de tipo Alzheimer (DA e da doença de Parkinson (DP foi iniciado estudo prospectivo e controlado. Foram comparados 6 pacientes com DA e 11 pacientes com DP, com um grupo controle composto por 12 pacientes com depressão maior crônica leve a moderada (DSM-III-R, 1987. Nos três grupos, através de análise espectral, foi obtida a mediana da frequência da energia da atividade dominante posterior. O grupo controle apresentou atividade posterior com frequência de 8,79 ± 0,52 (m±dp. No grupo com DA este valor foi 6,65 ± 0,80 (m±dp e no grupo com DP 7,69± 1,39 (m±dp. A hipótese experimental de que pacientes com DA e DP diferem dos controles em relação à atividade de fundo (definida como anormal sendo In order to evaluate the EEG activity during wakefulness in senile dementia of the Alzheimer type (AD and Parkinson's disease (PD, a prospective controlled study was performed. We compared 6 AD and 11 PD patients with a control group of 12 patients with mild to moderate major chronic depression (DSM-III-R 1987. The median of the frequencies and the power of the posterior dominant activity was obtained in the three groups using spectral analysis. The posterior activity had a frequency of 8.79±0.52 (mean±sd in the contrc group, 6.65+0.80 (mean+sd in the AD group and 7.69+1.39 (mean±sd in the PD group. The experimental hypothesis that patients with AD and PD differ from controls in relation to the background activity (defined a abnormal <8 was confirmed by the chi square test (p=0.0l and the t test showed that the mean of the frequency of the posterior power was significantly lower in AD (p=0.01 and PD (p=0.05 patients, compared with the controls. The results indicate that this abnormality could be correlated with the degree of cortical damage and natural history of these disorders.

  4. Mecanismos de interação ocular baseados em imagens voltados à inclusão digital de portadores de necessidades especiais.

    Fabricio da Silva Soares

    2008-01-01

    Essa dissertação apresenta o desenvolvimento de um protótipo de Dispositivo Rastreador (Eye Tracker) que permite a interação entre o usuário e o computador através dos movimentos oculares. O Rastreio Ocular (Eye Tracking) é o principal estudo dessa dissertação. Através de técnicas de Processamento Digital de Imagens procuramos detectar o Ponto de Interesse (Point of Regard) do usuário na tela do seu computador. O nosso protótipo foi desenvolvido com base nas técnicas de Foto-Oculografia e Víd...

  5. Preformulation and stability in biological fluids of the retrocyclin RC-101, a potential anti-HIV topical microbicide

    Conrads Thomas P

    2011-07-01

    Full Text Available Abstract Background RC-101, a cationic peptide retrocyclin analog, has in vitro activity against HIV-1. Peptide drugs are commonly prone to conformational changes, oxidation and hydrolysis when exposed to excipients in a formulation or biological fluids in the body, this can affect product efficacy. We aimed to investigate RC-101 stability under several conditions including the presence of human vaginal fluids (HVF, enabling the efficient design of a safe and effective microbicide product. Stability studies (temperature, pH, and oxidation were performed by HPLC, Circular Dichroism, and Mass Spectrometry (LC-MS/MS. Additionally, the effect of HVF on formulated RC-101 was evaluated with fluids collected from healthy volunteers, or from subjects with bacterial vaginosis (BV. RC-101 was monitored by LC-MS/MS for up to 72 h. Results RC-101 was stable at pH 3, 4, and 7, at 25 and 37°C. High concentrations of hydrogen peroxide resulted in less than 10% RC-101 reduction over 24 h. RC-101 was detected 48 h after incubation with normal HVF; however, not following incubation with HVF from BV subjects. Conclusions Our results emphasize the importance of preformulation evaluations and highlight the impact of HVF on microbicide product stability and efficacy. RC-101 was stable in normal HVF for at least 48 h, indicating that it is a promising candidate for microbicide product development. However, RC-101 stability appears compromised in individuals with BV, requiring more advanced formulation strategies for stabilization in this environment.

  6. Mapeamento das áreas de risco de inundação com a utilização do modelo digital de elevação hidrologicamente consistente: estudo de caso em Muriaé

    Nelson Avelar Guimarães

    2009-08-01

    Full Text Available A inundação de áreas urbanas tem sido um grave problema que vários municípios têm enfrentado nos últimos anos, em períodos de chuvas. A ocupação do solo no município de Muriaé - MG, tem-se dado de maneira bastante desordenada e dirigindo-se principalmente para as regiões planas, especialmente para as áreas de inundação do rio Muriaé. A motivação para este estudo surgiu da necessidade de fornecer informações para o processo de tomada de decisão por parte do administrador municipal no sentido de suas políticas públicas. Por esta razão, foi gerado um Modelo Digital de Elevação Hidrologicamente Consistente (MDEHC, a partir de um levantamento planialtimétrico para a caracterização do relevo. De posse do MDEHC foram realizadas simulações, variando altitudes de inundações com o objetivo de determinar quais os bairros que seriam afetados e suas respectivas áreas. Outra análise constitui em realizar a interseção do mapa de imóveis do município com as simulações para determinar o número de residências atingidas pelas inundações simuladas. Os resultados mostraram alta suscetibilidade do perímetro urbano à inundação, em especial o bairro Barra, que para a simulação de uma inundação de 192 metros de altitude, apresentou 27,46% de sua área inundada e cerca de 1440 imóveis atingidos. A metodologia aplicada neste estudo mostrou-ser satisfatória desde que os dados necessários para a caracterização de relevo sejam confiáveis.

  7. Hypomethylation of the IL17RC Promoter Associates with Age-Related Macular Degeneration

    Lai Wei

    2012-11-01

    Full Text Available Age-related macular degeneration (AMD is the leading cause of irreversible blindness in the elderly population worldwide. Although recent studies have demonstrated strong genetic associations between AMD and SNPs in a number of genes, other modes of regulation are also likely to play a role in the etiology of this disease. We identified a significantly decreased level of methylation on the IL17RC promoter in AMD patients. Furthermore, we showed that hypomethylation of the IL17RC promoter in AMD patients led to an elevated expression of its protein and messenger RNA in peripheral blood as well as in the affected retina and choroid, suggesting that the DNA methylation pattern and expression of IL17RC may potentially serve as a biomarker for the diagnosis of AMD and likely plays a role in disease pathogenesis.

  8. Hypomethylation of IL17RC Promoter Associates with Age-related Macular Degeneration

    Wei, Lai; Liu, Baoying; Tuo, Jingsheng; Shen, Defen; Chen, Ping; Li, Zhiyu; Liu, Xunxian; Ni, Jia; Dagur, Pradeep; Sen, H. Nida; Jawad, Shayma; Ling, Diamond; Park, Stanley; Chakrabarty, Sagarika; Meyerle, Catherine; Agron, Elvira; Ferris, Frederick L.; Chew, Emily Y.; McCoy, J. Philip; Blum, Emily; Francis, Peter J.; Klein, Michael L.; Guymer, Robyn H.; Baird, Paul N.; Chan, Chi-Chao; Nussenblatt, Robert B.

    2012-01-01

    SUMMARY Age related macular degeneration (AMD) is the leading cause of irreversible blindness in the elderly population worldwide. While recent studies have demonstrated strong genetic associations of single nucleotide polymorphisms within a number of genes and AMD, other modes of regulation are also likely to play a role in its etiology. We identified a significantly decreased level of methylation on the IL17RC promoter in AMD patients. Further, we showed that hypomethylation of the IL17RC promoter in AMD patients led to an elevated expression of its protein and mRNA in peripheral blood as well as in the affected retina and choroid, suggesting that the DNA methylation pattern and expression of IL17RC may potentially serve as a biomarker for the diagnosis of AMD and likely plays a role in disease pathogenesis. PMID:23177625

  9. KOMBINASI ALGORITMA AES, RC4 DAN ELGAMAL DALAM SKEMA HYBRID UNTUK KEAMANAN DATA

    Adi Widarma

    2016-01-01

    Full Text Available Pengiriman atau pertukaran data adalah hal yang sering terjadi dalam dunia teknologi informasi. Data yang dikirim kadang sering berisi data informasi yang penting bahkan sangat rahasia dan harus dijaga keamanannya. Untuk menjaga keamanan data, dapat dilakukan dengan menggunakan teknik kriptografi. Algoritma AES dan RC4 adalah salah satu dari algoritma simetri. Kelemahan dari algoritma simetri adalah proses enkripsi dan dekripsi menggunakan kunci yang sama. Untuk mengatasi tersebut dilakukan dengan menggunakan algoritma Elgamal. Algoritma Elgamal adalah termasuk algoritma asimetri. Algoritma Elgamal digunakan untuk mengamankan kunci dari algoritma AES dan RC4. Peningkatan keamanan pesan dan kunci dilakukan dengan algoritma hybrid. Algoritma hybrid dengan mengkombinasikan beberapa algoritma baik algoritma simetri maupun algortima asimetri akan menambah keamanan sehingga menjadi lebih aman dan powerful (Jain & Agrawal 2014. Penelitian ini akan dilakukan metode hybrid yaitu mengkombinasikan beberapa algoritma kriptografi dengan menggunakan algoritma Advanced Encryption Standard (AES dan RC4 untuk kerahasiaan data serta algoritma Elgamal digunakan untuk enkripsi dan dekripsi kunci.

  10. Nonlinear analysis of RC cylindrical tank and subsoil accounting for a low concrete strength

    Lewiński Paweł M.

    2017-01-01

    Full Text Available The paper discusses deformational and incremental approaches to a nonlinear FE analysis of soil-structure interaction including the description of behaviour of the RC structure and the subsoil under short-term loading. Two kinds of constitutive models for ground and structure were adopted for a nonlinear interaction analysis of the RC cylindrical tank with subsoil. The constitutive laws for concrete and subsoil were developed in compliance with the deformational and flow theories of plasticity. Moreover, a non-linear elastic-brittle-plastic analysis of RC axi-symmetric structures using finite element iterative techniques is presented. The results of the two types of FE analysis of soil-structure interaction are compared taking into account a low concrete strength of tank structure.

  11. An experimental investigation on the ultimate strength of epoxy repaired braced partial infilled RC frames

    Dubey, Shailendra Kumar Damodar; Kute, Sunil

    2014-09-01

    Due to earthquake, buildings are damaged partially or completely. Particularly structures with soft storey are mostly affected. In general, such damaged structures are repaired and reused. In this regard, an experimental investigation was planned and conducted on models of single-bay, single-storey of partial concrete infilled reinforced concrete (RC) frames up to collapse with corner, central and diagonal steel bracings. Such collapsed frames were repaired with epoxy resin and retested. The initiative was to identify the behaviour, extent of restored ultimate strength and deflection of epoxy-retrofitted frames in comparison to the braced RC frames. The performance of such frames has been considered only for lateral loads. In comparison to bare RC frames, epoxy repaired partial infilled frames have significant increase in the lateral load capacity. Central bracing is more effective than corner and diagonal bracing. For the same load, epoxy repaired frames have comparable deflection than similar braced frames.

  12. Out-of-plane ultimate shear strength of RC mat-slab foundations

    Kumagai, Hitoshi; Nukui, Yasushi; Imamura, Akira; Terayama, Takeshi; Hagiwara, Tetsuya; Kojima, Isao

    2011-01-01

    There have been few studies on the out-of-plane shear in RC mat-slab foundations, and the reasonable method has been demanded to estimate ultimate shear strength of RC mat-slab foundations in the nuclear facilities. In the previous study, the out-of-plane loading tests on the 20 square slab specimens had been performed to collect the fundamental data. In this study, the test results were successfully predicted by 3D non-linear Finite Element Analysis. It has been confirmed that the ultimate shear stress in the slab specimen can be estimated by the Arakawa's formula, which is commonly used to estimate the shear strength of RC beams. (author)

  13. Modeling of R/C Servo Motor and Application to Underactuated Mechanical Systems

    Ishikawa, Masato; Kitayoshi, Ryohei; Wada, Takashi; Maruta, Ichiro; Sugie, Toshiharu

    An R/C servo motor is a compact package of a DC geard-motor associated with a position servo controller. They are widely used in small-sized robotics and mechatronics by virtue of their compactness, easiness-to-use and high/weight ratio. However, it is crucial to clarify their internal model (including the embedded position servo) in order to improve control performance of mechatronic systems using R/C servo motors, such as biped robots or underactuted sysyems. In this paper, we propose a simple and realistic internal model of the R/C servo motors including the embedded servo controller, and estimate their physical parameters using continuous-time system identification method. We also provide a model of reference-to-torque transfer function so that we can estimate the internal torque acting on the load.

  14. Flexural strengthening of Reinforced Concrete (RC) Beams Retrofitted with Corrugated Glass Fiber Reinforced Polymer (GFRP) Laminates

    Aravind, N.; Samanta, Amiya K.; Roy, Dilip Kr. Singha; Thanikal, Joseph V.

    2015-01-01

    Strengthening the structural members of old buildings using advanced materials is a contemporary research in the field of repairs and rehabilitation. Many researchers used plain Glass Fiber Reinforced Polymer (GFRP) sheets for strengthening Reinforced Concrete (RC) beams. In this research work, rectangular corrugated GFRP laminates were used for strengthening RC beams to achieve higher flexural strength and load carrying capacity. Type and dimensions of corrugated profile were selected based on preliminary study using ANSYS software. A total of twenty one beams were tested to study the load carrying capacity of control specimens and beams strengthened with plain sheets and corrugated laminates using epoxy resin. This paper presents the experimental and theoretical study on flexural strengthening of Reinforced Concrete (RC) beams using corrugated GFRP laminates and the results are compared. Mathematical models were developed based on the experimental data and then the models were validated.

  15. 3-D Image Encryption Based on Rubik's Cube and RC6 Algorithm

    Helmy, Mai; El-Rabaie, El-Sayed M.; Eldokany, Ibrahim M.; El-Samie, Fathi E. Abd

    2017-12-01

    A novel encryption algorithm based on the 3-D Rubik's cube is proposed in this paper to achieve 3D encryption of a group of images. This proposed encryption algorithm begins with RC6 as a first step for encrypting multiple images, separately. After that, the obtained encrypted images are further encrypted with the 3-D Rubik's cube. The RC6 encrypted images are used as the faces of the Rubik's cube. From the concepts of image encryption, the RC6 algorithm adds a degree of diffusion, while the Rubik's cube algorithm adds a degree of permutation. The simulation results demonstrate that the proposed encryption algorithm is efficient, and it exhibits strong robustness and security. The encrypted images are further transmitted over wireless Orthogonal Frequency Division Multiplexing (OFDM) system and decrypted at the receiver side. Evaluation of the quality of the decrypted images at the receiver side reveals good results.

  16. Immunity to experimental Salmonella typhimurium infections in rats. Transfer of immunity with primed CD45RC+ and CD45RC- CD4 T-cell subpopulations

    Thygesen, P; Christensen, H B; Hougen, H P

    1996-01-01

    The protective effect of primed CD4 T cells against a lethal dose of Salmonella typhimurium was studied in Lewis rats. Primed CD4 T cells were obtained by inoculating Lewis rats with a non-lethal dose of S. typhimurium. Four weeks after the infection, spleen CD4 T cells were separated by antibody......-induced increase in CD45RC+ cells is most likely due to generation of antigen-specific memory T cells....

  17. Energy transfer dynamics in an RC-LH1-PufX tubular photosynthetic membrane

    Hsin, J; Sener, M; Schulten, K [Department of Physics and Beckman Institute, University of Illinois at Urbana-Champaign, Urbana (United States); Struempfer, J [Center for Biophysics and Computational Biology and Beckman Institute, University of Illinois at Urbana-Champaign, Urbana (United States); Qian, P; Hunter, C N, E-mail: kschulte@ks.uiuc.ed [Department of Molecular Biology and Biotechnology, University of Sheffield, Sheffield S10 2TN (United Kingdom)

    2010-08-15

    Light absorption and the subsequent transfer of excitation energy are the first two steps in the photosynthetic process, carried out by protein-bound pigments, mainly bacteriochlorophylls (BChls), in photosynthetic bacteria. BChls are anchored in light-harvesting (LH) complexes, such as light-harvesting complex I (LH1), which directly associates with the reaction center (RC), forming the RC-LH1 core complex. In Rhodobacter sphaeroides, RC-LH1 core complexes contain an additional protein, PufX, and assemble into dimeric RC-LH1-PufX core complexes. In the absence of LH complex II (LH2), the former complexes can aggregate into a helically ordered tubular photosynthetic membrane. We have examined the excitation transfer dynamics in a single RC-LH1-PufX core complex dimer using the hierarchical equations of motion for dissipative quantum dynamics that accurately, yet in a computationally costly manner, treat the coupling between BChls and their protein environment. A widely employed description, the generalized Foerster (GF) theory, was also used to calculate the transfer rates of the same excitonic system in order to verify the accuracy of this computationally cheap method. Additionally, in light of the structural uncertainties in the Rba. sphaeroides RC-LH1-PufX core complex, geometrical alterations were introduced into the BChl organization. It is shown that the energy transfer dynamics are not affected by the considered changes in the BChl organization and that the GF theory provides accurate transfer rates. An all-atom model for a tubular photosynthetic membrane is then constructed on the basis of electron microscopy data, and the overall energy transfer properties of this membrane are computed.

  18. Energy transfer dynamics in an RC-LH1-PufX tubular photosynthetic membrane

    Hsin, J; Sener, M; Schulten, K; Struempfer, J; Qian, P; Hunter, C N

    2010-01-01

    Light absorption and the subsequent transfer of excitation energy are the first two steps in the photosynthetic process, carried out by protein-bound pigments, mainly bacteriochlorophylls (BChls), in photosynthetic bacteria. BChls are anchored in light-harvesting (LH) complexes, such as light-harvesting complex I (LH1), which directly associates with the reaction center (RC), forming the RC-LH1 core complex. In Rhodobacter sphaeroides, RC-LH1 core complexes contain an additional protein, PufX, and assemble into dimeric RC-LH1-PufX core complexes. In the absence of LH complex II (LH2), the former complexes can aggregate into a helically ordered tubular photosynthetic membrane. We have examined the excitation transfer dynamics in a single RC-LH1-PufX core complex dimer using the hierarchical equations of motion for dissipative quantum dynamics that accurately, yet in a computationally costly manner, treat the coupling between BChls and their protein environment. A widely employed description, the generalized Foerster (GF) theory, was also used to calculate the transfer rates of the same excitonic system in order to verify the accuracy of this computationally cheap method. Additionally, in light of the structural uncertainties in the Rba. sphaeroides RC-LH1-PufX core complex, geometrical alterations were introduced into the BChl organization. It is shown that the energy transfer dynamics are not affected by the considered changes in the BChl organization and that the GF theory provides accurate transfer rates. An all-atom model for a tubular photosynthetic membrane is then constructed on the basis of electron microscopy data, and the overall energy transfer properties of this membrane are computed.

  19. Livro digital bilíngue para crianças surdas: uma análise na perspectiva do design visual de interface em tela

    Camila Wohlmuth da Silva

    2014-12-01

    Full Text Available As tecnologias digitais facilitam e potencializam os mecanismos de informação e comunicação. No contexto do design do livro acessível, várias ferramentas podem ser utilizadas para auxiliar a educação de uma criança surda. Atualmente, a política de inclusão do governo brasileiro necessita de material bilíngue, língua de sinais e português, para contribuir com o processo de aprendizagem em sala de aula. No caso dos livros digitais, ainda não se estabeleceu critérios de qualidade e eficiência para utilizá-los. Assim, este estudo buscou, por meio de uma análise descritiva de dois eBooks para surdos, mostrar critérios e princípios de design visual de interface, especificamente o design de tela, que poderão contribuir para a produção de livros digitais com mais qualidade.

  20. UMA ANÁLISE DA IMPLEMENTAÇÃO DA METODOLOGIA LEAN STARTUP EM UMA EMPRESA DO RAMO DE ENTRETENIMENTO DIGITAL

    João Pedro Boufleur

    2016-12-01

    Full Text Available A partir do final da década de 90, houve uma grande popularização do modelo de empresa conhecido como startup. As startups se diferenciaram por buscarem desenvolver produtos e serviços inovadores, mas contam com alto risco de falhar ao tentar atingir esse objetivo. Visto que os modelos tradicionais de administração não são considerados compatíveis com esse tipo de empresa, a metodologia Lean Startup propõe uma nova abordagem de trabalho para as startups alcançarem seu sucesso. Apesar de ser bastante difundida no meio empreendedor, esta metodologia é ainda pouco explorada academicamente. Portanto, o objetivo deste artigo é analisar a utilização do Lean Startup através de um estudo de caso no Superplayer, startup do ramo da tecnologia que usa a metodologia desde sua concepção. Como resultado do estudo foi possível descrever a utilização do Lean Startup e apontar vantagens e barreiras desta metodologia, gerando diretrizes que poderão auxiliar gestores e empreendedores que visam empregar a mesma em suas empresas.

  1. Uma análise da implementação da metodologia lean startup em uma empresa do ramo de entretenimento digital

    João Pedro Boufleur

    2016-12-01

    Full Text Available A partir do final da década de 90, houve uma grande popularização do modelo de empresa conhecido como startup. As startups se diferenciaram por buscarem desenvolver produtos e serviços inovadores, mas contam com alto risco de falhar ao tentar atingir esse objetivo. Visto que os modelos tradicionais de administração não são considerados compatíveis com esse tipo de empresa, a metodologia Lean Startup propõe uma nova abordagem de trabalho para as startups alcançarem seu sucesso. Apesar de ser bastante difundida no meio empreendedor, esta metodologia é ainda pouco explorada academicamente. Portanto, o objetivo deste artigo é analisar a utilização do Lean Startup através de um estudo de caso no Superplayer, startup do ramo da tecnologia que usa a metodologia desde sua concepção. Como resultado do estudo foi possível descrever a utilização do Lean Startup e apontar vantagens e barreiras desta metodologia, gerando diretrizes que poderão auxiliar gestores e empreendedores que visam empregar a mesma em suas empresas.

  2. Derivation of the clinical grade human embryonic stem cell line RCe016-A (RC-12

    P.A. De Sousa

    2016-05-01

    Full Text Available The human embryonic stem cell line RCe016-A (RC-12 was derived under quality assured compliance with UK regulations, EU Directives and International guidance for tissue procurement, processing and storage according to good manufacturing practice (GMP standards. The cell line was derived from a cryopreserved blastocyst stage embryo voluntarily donated as surplus to fertility requirements following informed consent. RCe016-A (RC-12 shows normal pluripotency marker expression and differentiation to three germ layers in vitro. Karyology revealed a mixed male karyotype at early passage (P15, which resolved as normal 46XY by passage 33. Microsatellite PCR identity, HLA and blood group typing data is available.

  3. Analysis of an Irregular RC Multi-storeyed Building Subjected to Dynamic Loading

    AkashRaut; Pachpor, Prabodh; Dautkhani, Sanket

    2018-03-01

    Many buildings in the present scenario have irregular configurations both in plan and elevation. This in future may subject to devastating earthquakes. So it is necessary to analyze the structure. The present paper is made to study three type of irregularity wiz vertical, mass and plan irregularity as per clause 7.1 of IS 1893 (part1)2002 code. The paper discusses the analysis of RC (Reinforced Concrete) Buildings with vertical irregularity. The study as a whole makes an effort to evaluate the effect of vertical irregularity on RC buildings for which comparison of three parameters namely shear force, bending moment and deflection are taken into account.

  4. Virtual RC Damping of LCL-Filtered Voltage Source Converters with Extended Selective Harmonic Compensation

    Wang, Xiongfei; Blaabjerg, Frede; Loh, Poh Chiang

    2015-01-01

    Active damping and harmonic compensation are two common challenges faced by LCL-filtered voltage source converters. To manage them holistically, this paper begins by proposing a virtual RC damper in parallel with the passive filter capacitor. The virtual damper is actively inserted by feeding back...... the passive capacitor current through a high-pass filter, which indirectly, furnishes two superior features. They are the mitigation of phase lag experienced by a conventional damper and the avoidance of instability caused by the negative resistance inserted unintentionally. Moreover, with the virtual RC...

  5. The snap-back effect of an RC-IGBT and its simulations

    Zhang Wenliang; Tian Xiaoli; Zhu Yangjun; Tan Jingfei

    2013-01-01

    The RC-IGBT (reverse conducting insulated gate bipolar transistor) is a new kind of power semiconductor device which has many advantages such as smaller chip size, higher power density, lower manufacturing cost, softer turn off behavior, and better reliability. However, its performance has a number of drawbacks, such as the snap-back effect. In this paper, an introduction about the snap-back effect of the RC-IGBT is given firstly. Then the physical explanations are presented with two simplified models. After that, some numerical simulations are carried out to verify the correctness of the models. (semiconductor devices)

  6. Detecção da citotoxicidade de materiais biocompatíveis nas linhagens celulares MRC-5, HeLa e RC-IAL MRC-5, HeLa and RC-IAL cell lines sensitivity for detection of cytotoxicity of biocompatible materials

    Aurea S. Cruz

    1992-04-01

    Full Text Available A sensibilidade de uma linhagem celular diplóide e duas heteroplóides, para a detecção de citotoxicidade através do método de difusão em camada de ágar sobre culturas celulares, foi avaliada experimentalmente com solução de ácido ascórbico em diferentes concentrações e, na prática, frente a 562 amostras de 21 diferentes materiais industriais enviados para análise na Seção de Culturas Celulares do Instituto Adolfo Lutz. A linhagem celular heteroplóide designada RC-IAL apresentou, em relação às linhagens MRC-5 e HeLa, maior sensibilidade porque revelou a presença de efeito citotóxico nas menores concentrações utilizadas (10 e 25 ug/ml do ácido ascórbico e apresentou maior diâmetro do halo citotóxico em 15 amostras e igual diâmetro em 16 das 43 amostras (7,6% que resultaram positivas. Nas 43 amostras positivas, a linhagem MRC-5 não revelou citotoxicidade em 3 amostras de espuma e 1 de resina acrílica. O polivinilcloreto (PVC e o polietileno, raramente revelaram positividade, enquanto plástico, algodão e resinas acrílicas revelaram citotoxicidade ao redor de 5%. Em vista dos resultados é discutida a proposta da utilização da linhagem RC-IAL e HeLa para a continuidade das futuras análises solicitadas ao Instituto Adolfo LutzThe sensitivity of diploid and heteroploid cell lines for detection of cytotoxicity using the agar diffusion method on cell culture, was tested with ascorbic acid solution of different concentrations. A total of 562 samples of 21 various materials were tested. The heteroploid cell line, RC-IAL, showed in relation to the MRC-5 and HeLa cell lines, greater sensitivity because it showed the presence of cytotoxic effect with the lowest concentration used (10 and 25ug/ml of ascorbic acid and showed greater diameter of cytotoxic halo in 15 samples and equal diameter in 16 of the 43 positive samples (7.6%. Out of 43 positive samples, the MRC-5 line did not show cytotoxicity in 3 sponge samples and

  7. Digital radiography

    Brody, W.R.

    1984-01-01

    Digital Radiography begins with an orderly introduction to the fundamental concepts of digital imaging. The entire X-ray digital imagining system is described, from an overall characterization of image quality to specific components required for a digital radiographic system. Because subtraction is central to digital radiographic systems, the author details the use of various subtraction methods for image enhancement. Complex concepts are illustrated with numerous examples and presented in terms that can readily be understood by physicians without an advanced mathematics background. The second part of the book discusses implementations and applications of digital imagining systems based on area and scanned detector technologies. This section includes thorough coverage of digital fluoroscopy, scanned projection radiography, and film-based digital imaging systems, and features a state-of-the-art synopsis of the applications of digital subtraction angiography. The book concludes with a timely assessment of anticipated technological advances

  8. Digital Culture and Digital Library

    Yalçın Yalçınkaya

    2016-12-01

    Full Text Available In this study; digital culture and digital library which have a vital connection with each other are examined together. The content of the research consists of the interaction of culture, information, digital culture, intellectual technologies, and digital library concepts. The study is an entry work to integrity of digital culture and digital library theories and aims to expand the symmetry. The purpose of the study is to emphasize the relation between the digital culture and digital library theories acting intersection of the subjects that are examined. Also the perspective of the study is based on examining the literature and analytical evaluation in both studies (digital culture and digital library. Within this context, the methodology of the study is essentially descriptive and has an attribute for the transmission and synthesis of distributed findings produced in the field of the research. According to the findings of the study results, digital culture is an inclusive term that describes the effects of intellectual technologies in the field of information and communication. Information becomes energy and the spectrum of the information is expanding in the vertical rise through the digital culture. In this context, the digital library appears as a new living space of a new environment. In essence, the digital library is information-oriented; has intellectual technology support and digital platform; is in a digital format; combines information resources and tools in relationship/communication/cooperation by connectedness, and also it is the dynamic face of the digital culture in time and space independence. Resolved with the study is that the digital libraries are active and effective in the formation of global knowing and/or mass wisdom in the process of digital culture.

  9. DIGITAL STORYTELLING, EDUCAÇÃO SUPERIOR E LITERACIA DIGITAL

    Josias Ricardo Hack

    2013-04-01

    Full Text Available O texto revisa e dialoga com autores de artigos e livros em Língua Inglesa e Língua Portuguesa sobre fundamentos técnicos da produção audiovisual, como o Digital Storytelling, a ser utilizada na educação superior e produzida pelos próprios interlocutores do processo de aprendizagem. O intuito é refletir sobre algumas características necessárias para se desenvolver uma experiência contextualizada com curtas histórias audiovisuais pessoais na aprendizagem de adultos. A metodologia de investigação é pautada em pesquisa bibliográfica nas bases de dados da Nottingham Trent University (Inglaterra e da Universidade Federal de Santa Catarina (Brasil. Os resultados do estudo apontam que certas habilidades, como a capacidade de construir uma narrativa e editar imagem, vídeo e som são requeridas dos envolvidos em educação superior em razão da inserção de múltiplas tecnologias digitais no cotidiano. Assim, a experiência prática de produção audiovisual educativa pode trazer a possibilidade de literacia digital pela realização de peças audiovisuais no processo de aprendizagem colaborativa de adultos. Palavras-chave: Histórias digitais. Digital Storytelling. Educação superior. Literacia digital. Aprendizagem de adultos.

  10. Digital mammography; Mamografia digital

    Chevalier, M.; Torres, R.

    2010-07-01

    Mammography represents one of the most demanding radiographic applications, simultaneously requiring excellent contrast sensitivity, high spatial resolution, and wide dynamic range. Film/screen is the most widely extended image receptor in mammography due to both its high spatial resolution and contrast. The film/screen limitations are related with its narrow latitude, structural noise and that is at the same time the medium for the image acquisition, storage and presentation. Several digital detector made with different technologies can overcome these difficulties. Here, these technologies as well as their main advantages and disadvantages are analyzed. Also it is discussed its impact on the mammography examinations, mainly on the breast screening programs. (Author).

  11. Descrição de uma ferramenta digital e de um ambiente virtual para fins de segunda opinião em oftalmologia Description of a digital image system and a virtual environment to be used as a remote second referral option in ophthalmology

    Alessandro Dantas Pennella

    2003-10-01

    Full Text Available OBJETIVOS: Idealizar, desenvolver e verificar a funcionalidade um sistema de teleoftalmologia para diagnóstico remoto em casos clínicos. MÉTODOS: Descrever o funcionamento e utilização do sistema, sua capacidade de captura, arquivamento e envio de imagens via internet, e de um domínio virtual voltado ao telediagnóstico, aconselhamento ou segunda opinião. RESULTADOS: Foram definidos os requisitos básicos, detalhes de programação e de funcionamento de um programa de captura de imagens. O funcionamento do mesmo acoplado a uma placa de captura de imagens foi realizado com sucesso, bem como a criação, na internet, de um domínio médico-oftalmológico. CONCLUSÃO: Os resultados preliminares permitiram a avaliação de um sistema misto para o suporte médico em nosso meio. Os instrumentos diagnósticos disponíveis bem como suas conexões com a rede foram satisfatórias e suficientes para viabilizar um estudo piloto bem su-cedido. O sistema revelou-se potencialmente adequado para o telediagnóstico e segunda opinião. O método necessita de testes clínicos e compa-ração com métodos diagnósticos tradicionais para comprovar a sua eficácia.PURPOSE: To investigate the possibilities of a teleophthalmology system to be used in a remote second referral program. METHODS: Digital images of the anterior segment were digitized by the Eyemail program and attached to the clinical description of the case and the file was sent to the website www.suportemedico.com.br for remote telediagnosis. The telediagnosis was then compared with the in loco diagnosis. RESULTS: The Eyemail system was able to capture images from the slit lamp and to send the files to the website. The website received the files and the operator was able to make the diagnosis using those files. CONCLUSION: The Eyemail system proved to have a potential use as a second referral program.

  12. Generation of equivalent forms of operational trans-conductance amplifier-RC sinusoidal oscillators: the nullor approach

    Raj Senani

    2014-06-01

    Full Text Available It has been shown in two earlier papers published from this study that corresponding to a given single-operational trans-conductance amplifier (single-OTA-RC and dual-OTA-RC sinusoidal oscillators, there are three other structurally distinct equivalent forms having the same characteristic equation, one of which employs both grounded capacitors (GC. In this study, an earlier nullor-based theory of generating equivalent op-amp oscillator circuits, proposed by the first author, is extended to derive equivalent OTA-RC circuits which discloses the existence of an additional number of equivalent forms for the same given OTA-RC oscillators than those predicted by the quoted earlier works, and thereby considerably enlarging the set of equivalents of a given OTA-RC oscillator. Furthermore, the presented nullor-based theory of generating equivalent OTA-RC oscillators results in three additional interesting outcomes: (i the revelation that corresponding to any given OTA-RC oscillator there are two ‘both-GC’ oscillators (and not merely one, as derived in the quoted earlier works; (ii the availability of explicit current outputs in several of the derived equivalents and (iii the realisability explicit-current-output ‘quadrature oscillators’ in some of the generated equivalent oscillators. The workability of the generated equivalent OTA-RC oscillators has been verified by SPICE simulations, based on CMOS OTAs using 0.18 µm CMOS technology process parameters, and some sample results are given.

  13. Digital Tectonics

    Christiansen, Karl; Borup, Ruben; Søndergaard, Asbjørn

    2014-01-01

    Digital Tectonics treats the architectonical possibilities in digital generation of form and production. The publication is the first volume of a series, in which aspects of the strategic focus areas of the Aarhus School of Architecture will be disseminated.......Digital Tectonics treats the architectonical possibilities in digital generation of form and production. The publication is the first volume of a series, in which aspects of the strategic focus areas of the Aarhus School of Architecture will be disseminated....

  14. Digital squares

    Forchhammer, Søren; Kim, Chul E

    1988-01-01

    Digital squares are defined and their geometric properties characterized. A linear time algorithm is presented that considers a convex digital region and determines whether or not it is a digital square. The algorithm also determines the range of the values of the parameter set of its preimages....... The analysis involves transforming the boundary of a digital region into parameter space of slope and y-intercept...

  15. Digital skrivedidaktik

    Digital skrivedidaktik består af to dele. Første del præsenterer teori om skrivekompetence og digital skrivning. Digital skrivning er karakteriseret ved at tekster skrives på computer og med digitale værktøjer, hvilket ændrer skrivningens traditionelle praksis, produkt og processer. Hvad er digital...... om elevens skriveproces) og Blogskrivning (der styrker eleverne i at bruge blogs i undervisningen)....

  16. Isolation and molecular characterization of RcSERK1: A Rosa ...

    User

    2011-05-16

    May 16, 2011 ... somatic embryogenesis receptor-like kinase; SP, signal peptide; SPP, .... primers used for detecting RcSERK1 gene expression were: for- .... and mainly in the PLBs but weak in the callus and rhi- ... Transformed cells in the bright light (A and E), in the dark for cell nucleuses stained with DAPI (B and F),.

  17. Experimental study on behavior of RC panels covered with steel plates subjected to missile impact

    Jun Hashimoto; Katsuki Takiguchi; Koshiro Nishimura; Kazuyuki Matsuzawa; Mayuko Tsutsui; Yasuhiro Ohashi; Isao Kojima; Haruhiko Torita

    2005-01-01

    This paper describes an experimental study on the behavior of concrete panels with steel plate subjected to missile impact. Two tests were carried out, divided in accordance with the types of projectile, non-deformable and deformable. In all, 40 specimens of 750 mm square were prepared. The panel specimen was suspended vertically by two steel wire ropes to allow free movement after projectile impact, and was subjected to a projectile. As a result, it is confirmed that a RC panel with steel plate on its back side has higher impact resistance performance than a RC panel and that thickness of concrete panel, thickness of steel plate and the impact velocity of the projectile have a great effect on the failure modes of steel concrete panels. Moreover, based on the experimental results, the quantitative evaluation method for impact resistance performance of RC panels covered with steel plates is examined. The formula for perforation velocity of a half steel concrete panel, proposed in accordance with the bulging height, is effective to evaluate the impact resistance performance of RC panels with steel plates. (authors)

  18. Numerical study on shear resisting mechanism for corroded RC box culverts

    Matsuo, Toyofumi; Matsumura, Takuro; Iwamori, Akiyuki

    2013-01-01

    This paper discusses the effects of reinforcing steel corrosion on the shear resisting mechanism of RC box culverts and the applicability of the material degradation model in a finite element method. First, in FEM analyses, loss of reinforcement section area and initial tension strain due to reinforcement corrosion, and deteriorated bond characteristics between reinforcement and concrete, were considered. Second, cyclic loading tests using full-scale corroded specimens were numerically analyzed. The analyzed crack patterns and load-displacement relationships up to the maximum load were observed to be in close agreement with the experiment results within the average corrosion ratio of 10% of primary reinforcement. The fact that corrosion cracks can importantly affect the progression of shear cracks and shear strength of RC beams was also found. On the other hand, we established that RC box culverts being statically indeterminate structures, sectional forces are redistributed after cracking damage, and local material deterioration has a minor effect on shear capacity. Furthermore, a parametric study was carried out for corroded RC box culverts using parameters such as size, steel corrosion location, and corrosion level. (author)

  19. Strut and tie modeling for RC short beams with corroded stirrups

    Ahmed K. El-Sayed

    Full Text Available Corrosion of steel reinforcement is one of the major problems that shorten the service life of reinforced concrete (RC structures. Steel stirrups, due to their location as an outer reinforcement, are more susceptible to corrosion problems and damage. However, there is limited research work in the literature on the effects of stirrup corrosion on the shear strength of RC beams. This paper attempts to evaluate analytically the residual shear strength of RC short beams with corrosion-damaged stirrups. The shear strength of short or deep beams are generally determined using the strut and tie model. The corrosion effects were implemented in the model to make it capable of predicting the residual shear capacity of RC beams with corroded stirrups. The effect of corrosion is implemented considering the reduction in geometry of the concrete cross section due to spalling and reduction in effective compressive strength of concrete due to corrosion cracks. The proposed strut and tie model which accounts for the corrosion effects was verified using the experimental data available in the literature, and good agreement was found.

  20. Modelling loading and break-up of RC structure due to internal explosion of fragmenting shells

    Weerheijm, J.; Stolz, A.; Riedel, W.; Mediavilla Varas, J.

    2012-01-01

    The Klotz Group (KG), an international group of experts on explosion safety, investigates the debris throw hazard associated with the accidental detonation of ammunition in reinforced concrete (RC-) structures. Experiments are combined with engineering models but also with results of advanced

  1. Modelling loading and break-up of RC structure due to internal explosion of fragmenting shells

    Weerheijm, J.; Stolz, A.; Riedel, W.; Mediavilla, J.

    2012-01-01

    The Klotz Group (KG), an mtemational group of experts on explosion safety, investigates the debris throw hazard associated with the accidental detonation of ammunition in reinforced concrete (RC-) structures. Experiments are combined with engineering models but also with results of advanced

  2. KOMBINASI ALGORITMA AES, RC4 DAN ELGAMAL DALAM SKEMA HYBRID UNTUK KEAMANAN DATA

    Adi Widarma

    2016-01-01

    Full Text Available Abstrak — Pengiriman atau pertukaran data adalah hal yang sering terjadi dalam dunia teknologi informasi. Data yang dikirim kadang sering berisi data informasi yang penting bahkan sangat rahasia dan harus dijaga keamanannya. Untuk menjaga keamanan data, dapat dilakukan dengan menggunakan teknik kriptografi. Algoritma AES dan RC4 adalah salah satu dari algoritma simetri. Kelemahan dari algoritma simetri adalah proses enkripsi dan dekripsi menggunakan kunci yang sama. Untuk mengatasi tersebut dilakukan dengan menggunakan algoritma Elgamal. Algoritma Elgamal adalah termasuk algoritma asimetri. Algoritma Elgamal  digunakan untuk mengamankan kunci dari algoritma AES dan RC4. Peningkatan keamanan pesan dan kunci dilakukan dengan algoritma hybrid. Algoritma hybrid dengan mengkombinasikan beberapa algoritma baik algoritma simetri maupun algortima asimetri akan menambah keamanan sehingga menjadi lebih aman dan powerful (Jain & Agrawal 2014. Penelitian ini akan dilakukan metode hybrid yaitu mengkombinasikan beberapa algoritma kriptografi dengan menggunakan algoritma Advanced Encryption Standard (AES dan RC4 untuk kerahasiaan data serta algoritma Elgamal digunakan untuk enkripsi dan dekripsi kunci. Kata Kunci :  kriptograpi, algoritma AES, RC4, Elgamal, hybrid

  3. The values of the parameters of some multilayer distributed RC null networks

    Huelsman, L. P.; Raghunath, S.

    1974-01-01

    In this correspondence, the values of the parameters of some multilayer distributed RC notch networks are determined, and the usually accepted values are shown to be in error. The magnitude of the error is illustrated by graphs of the frequency response of the networks.

  4. GENERACIÓN DE POLINOMIOS DE SCHUBERT CON COCOA II: GRAFOS RC.

    Fernando Novoa

    2004-06-01

    Full Text Available El polinomio de Schubert asociado a una permutación w es codificado por medio de la información contenida en ciertos grafos rc. Presentamos un programa para el cómputo de los polinomios de Schubert por medio de movimientos definidos sobre estos grafos.

  5. Pitting corrosion and structural reliability of corroding RC structures: Experimental data and probabilistic analysis

    Stewart, Mark G.; Al-Harthy, Ali

    2008-01-01

    A stochastic analysis is developed to assess the temporal and spatial variability of pitting corrosion on the reliability of corroding reinforced concrete (RC) structures. The structure considered herein is a singly reinforced RC beam with Y16 or Y27 reinforcing bars. Experimental data obtained from corrosion tests are used to characterise the probability distribution of pit depth. The RC beam is discretised into a series of small elements and maximum pit depths are generated for each reinforcing steel bar in each element. The loss of cross-sectional area, reduction in yield strength and reduction in flexural resistance are then inferred. The analysis considers various member spans, loading ratios, bar diameters and numbers of bars in a given cross-section, and moment diagrams. It was found that the maximum corrosion loss in a reinforcing bar conditional on beam collapse was no more than 16%. The probabilities of failure considering spatial variability of pitting corrosion were up to 200% higher than probabilities of failure obtained from a non-spatial analysis after 50 years of corrosion. This shows the importance of considering spatial variability in a structural reliability analysis for deteriorating structures, particularly for corroding RC beams in flexure

  6. Susceptibility of the MMPI-2 Clinical, Restructured Clinical (RC), and Content Scales to Overreporting and Underreporting

    Sellbom, Martin; Ben-Porath, Yossef S.; Graham, John R.; Arbisi, Paul A.; Bagby, R. Michael

    2005-01-01

    The authors examined and compared the susceptibility of three Minnesota Multiphasic Personality Inventory-2 (MMPI-2) scale sets (Clinical, Restructured Clinical [RC], and Content) to over- and underreporting using five analog samples. Two samples of 85 and 191 undergraduate students, respectively, took the MMPI-2 under underreporting versus…

  7. Psychometric Properties of the MMPI-2-RF Somatic Complaints (RC1) Scale

    Thomas, Michael L.; Locke, Dona E. C.

    2010-01-01

    The MMPI-2 Restructured Form (MMPI-2-RF; Tellegen & Ben-Porath, 2008) was designed to be psychometrically superior to its MMPI-2 counterpart. However, the test has yet to be extensively evaluated in diverse clinical settings. The purpose of this study was to examine the psychometric properties of the MMPI-2-RF Somatic Complaints (RC1) scale in…

  8. RC Beams Strengthened with Mechanically Fastened Composites: Experimental Results and Numerical Modeling

    Enzo Martinelli

    2014-03-01

    Full Text Available The use of mechanically-fastened fiber-reinforced polymer (MF-FRP systems has recently emerged as a competitive solution for the flexural strengthening of reinforced concrete (RC beams and slabs. An overview of the experimental research has proven the effectiveness and the potentiality of the MF-FRP technique which is particularly suitable for emergency repairs or when the speed of installation and immediacy of use are imperative. A finite-element (FE model has been recently developed by the authors with the aim to simulate the behavior of RC beams strengthened in bending by MF-FRP laminates; such a model has also been validated by using a wide experimental database collected from the literature. By following the previous study, the FE model and the assembled database are considered herein with the aim of better exploring the influence of some specific aspects on the structural response of MF-FRP strengthened members, such as the bearing stress-slip relationship assumed for the FRP-concrete interface, the stress-strain law considered for reinforcing steel rebars and the cracking process in RC members resulting in the well-known tension stiffening effect. The considerations drawn from this study will be useful to researchers for the calibration of criteria and design rules for strengthening RC beams through MF-FRP laminates.

  9. Impact response of RC rock-shed girder with sand cushion under falling load

    Bhatti, Abdul Qadir; Kishi, Norimitsu

    2010-01-01

    Research highlights: → An applicability of FE model of RC girders with sand cushion has been investigated. → Experimental and numerical results of Impact force, reaction force and displacement have been performed. → Cracks obtained from numerical models are in good agreement with the experimental ones. → Reaction force-displacement loops agree well between numerical and experimental results. → The configuration of the hysteretic loop at failure of RC girders can be approximated by a parallelogram. - Abstract: In order to establish a proper finite element model of prototype RC girder with sand element for impact response analysis, dynamic response analysis of RC girders with sand cushion subjected to impact force due to weight falling from the height of H = 2.5, 5, 7.5 and 10 m was performed to improve the state of the art of protective design for real scale rock-sheds by using LS-DYNA code. An applicability of proposed model was discussed comparing with experimental results (e.g. impact force, reaction force and displacement waves). From this study, dynamic characteristics of impact response can be better simulated by using the proposed model. As a result, when the sand cushion was set up, the impact force, reaction force, mid-span displacement waves, distribution of reaction force-displacement loops, and crack patterns obtained from the numerical analysis are in good agreement with those from the experimental results.

  10. Identification Report: Earthquake Test on 2-Bay, 6-Story Scale 1:5 RC-Frames

    Kirkegaard, Poul Henning; Skjærbæk, P. S.; Nielsen, Søren R. K.

    The aim of the present report is to supply the identification results from the tests performed with a laboratory model of a plane 6-storey, 2-bay scale 1:5 RC-frame at Aalborg University, Denmark during the autumn 1996. The tests were performed as a part of a Ph.D study considering evaluation of ...

  11. Power Efficient Gigabit Communication Over Capacitively Driven RC-Limited On-Chip Interconnects

    Mensink, E.; Schinkel, Daniel; Klumperink, Eric A.M.; van Tuijl, Adrianus Johannes Maria; Nauta, Bram

    2010-01-01

    Abstract—This paper presents a set of circuit techniques to achieve high data rate point-to-point communication over long on-chip RC-limited wire-pairs. The ideal line termination impedances for a flat transfer function with linear phase (pure delay) are derived, using an s-parameter wire-pair

  12. The Tension-Stiffening Contribution of NSM CFRP to the Behavior of Strengthened RC Beams

    Ahmad Azim Shukri

    2015-07-01

    Full Text Available Tension stiffening is a characteristic behavior of reinforced concrete (RC beams which is directly affected by the bond-slip property of steel bar and concrete interfaces. A beam strengthened with a near-surface mounted (NSM technique would be even more affected by tension stiffening, as the NSM reinforcement also possess a bond-slip property. Yet assessing how much the tension stiffening of NSM contributes to the behavior of RC beams is difficult due to the fact that bond-slip effects cannot be directly incorporated into a strain-based moment-curvature analysis. As such, the tension stiffening is typically incorporated through various empirical formulations, which can require a great deal of testing and calibrations to be done. In this paper a relatively new method, which can be called the mechanics-based segmental approach, is used to directly simulate the tension stiffening effect of NSM reinforcements on RC beams, without the need for empirical formulations to indirectly simulate the tension stiffening. Analysis shows that the tension stiffening of NSM fiber reinforced polymer (FRP contributes a significant portion to the stiffness and strength of the strengthened RC beam not only during serviceability, but at all load levels.

  13. Problems and their solutions in practical application of Eurocodes in seismic design of RC structures

    Milev Jordan

    2016-01-01

    Full Text Available The main purpose of the paper is to present practical application of Eurocodes in the field of RC structures design. The selected examples represent the main problems in practical application of Eurocodes for seismic analysis and design of RC Structures in Bulgarian construction practice. The analysis is focused on some structural and economic problems as well as on some contradictions in Eurocode 8 itself. Special attention is paid to the practical solution of the following problems: recognition of torsionally flexible systems, stiffness reduction of RC elements for linear analysis dimensions and detailing of confined boundary areas of shear walls, detailing of wall structures, etc. Those problems appear during the practical design of some buildings in Bulgaria. Several proposals for solving some problems defined in the paper are presented through some practical examples. Some conclusions are made for further application of Eurocode 8 in the design and construction practice. The importance of some rules and procedures in Eurocode 8 is supported by the examples of damaged RC members during the past earthquakes. The problems of Eurocode 8 and their solutions are illustrated through the experience of Bulgarian construction practice.

  14. Active rc filter permits easy trade-off of amplifier gain and sensitivity to gain

    Kerwin, W. J.; Shaffer, C. V.

    1968-01-01

    Passive RC network was designed with zeros of transmission in the right half of the complex frequency plane in the feedback loop of a simple negative-gain amplifier. The proper positioning provides any desired trade-off between amplifier gain and sensitivity to amplifier gain.

  15. In RC buildings, the vertical and horizontal members (ie, the beams ...

    Home; Journals; Resonance – Journal of Science Education; Volume 10; Issue 4. Learning Earthquake Design and Construction - 18. How do Beams in RC Buildings Resist Earthquakes? C V R Murty. Classroom Volume 10 Issue 4 April 2005 pp 87-90 ...

  16. The negative differential resistance characteristics of an RC-IGBT and its equivalent circuit model

    Zhang Wenliang; Zhu Yangjun; Tian Xiaoli; Lu Shuojin

    2014-01-01

    A simple equivalent circuit model is proposed according to the device structure of reverse conducting insulated gate bipolar transistors (RC-IGBT). Mathematical derivation and circuit simulations indicate that this model can explain the snap-back effect (including primary snap-back effect, secondary snap-back effect, and reverse snap-back effect) and hysteresis effect perfectly. (semiconductor devices)

  17. Study on shear strengthening of RC continuous T-beams using different layers of CFRP strips

    Alferjani, M. B. S.; Samad, A. A. Abdul; Mohamad, Noridah [Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia, Batu Pahat (Malaysia); Elrawaff, Blkasem S.; Elzaroug, Omer [Faculty of Civil Engineering Omar Al Mukhtar University, Bayda, Libya, Africa (Libya)

    2015-05-15

    Carbon fiber reinforced polymer (CFRP) laminates are externally bonded to reinforced concrete (RC) members to provide additional strength such as flexural, shear, etc. However, this paper presents the results of an experimental investigation for enhancing the shear capacity of reinforced concrete (RC) continuous T- beams using different layers of CFRP wrapping schemes. A total of three concrete beams were tested and various sheet configurations and layouts were studied to determine their effects on ultimate shear strength and shear capacity of the beams. One beam was kept as control beams, while other beams were strengthened with externally bonded CFRP strips with three side bonding and one or two layers of CFRP strips. From the test results, it was found that all schemes were found to be effective in enhancing the shear strength of RC beams. It was observed that the strength increases with the number of sheet layers provided the most effective strengthening for RC continuous T- beam. Beam strengthened using this scheme showed 23.21% increase in shear capacity as compared to the control beam. Two prediction models available in literature were used for computing the contribution of CFRP strips and compared with the experimental results.

  18. Shear Strengthening of RC Beams Using Sprayed Glass Fiber Reinforced Polymer

    Sayed Mohamad Soleimani

    2012-01-01

    Full Text Available The effectiveness of externally bonded sprayed glass fiber reinforced polymer (Sprayed GFRP in shear strengthening of RC beams under quasi-static loading is investigated. Different techniques were utilized to enhance the bond between concrete and Sprayed GFRP, involving the use of through bolts and nuts paired with concrete surface preparation through sandblasting and through the use of a pneumatic chisel prior to Sprayed GFRP application. It was found that roughening the concrete surface using a pneumatic chisel and using through bolts and nuts were the most effective techniques. Also, Sprayed GFRP applied on 3 sides (U-shaped was found to be more effective than 2-sided Sprayed GFRP in shear strengthening. Sprayed GFRP increased the shear load-carrying capacity and energy absorption capacities of RC beams. It was found that the load-carrying capacity of strengthened RC beams was related to an effective strain of applied Sprayed GFRP. This strain was related to Sprayed GFRP configuration and the technique used to enhance the concrete-FRP bond. Finally, an equation was proposed to calculate the contribution of Sprayed GFRP in the shear strength of an RC beam.

  19. The Tension-Stiffening Contribution of NSM CFRP to the Behavior of Strengthened RC Beams.

    Shukri, Ahmad Azim; Darain, Kh Mahfuz Ud; Jumaat, Mohd Zamin

    2015-07-08

    Tension stiffening is a characteristic behavior of reinforced concrete (RC) beams which is directly affected by the bond-slip property of steel bar and concrete interfaces. A beam strengthened with a near-surface mounted (NSM) technique would be even more affected by tension stiffening, as the NSM reinforcement also possess a bond-slip property. Yet assessing how much the tension stiffening of NSM contributes to the behavior of RC beams is difficult due to the fact that bond-slip effects cannot be directly incorporated into a strain-based moment-curvature analysis. As such, the tension stiffening is typically incorporated through various empirical formulations, which can require a great deal of testing and calibrations to be done. In this paper a relatively new method, which can be called the mechanics-based segmental approach, is used to directly simulate the tension stiffening effect of NSM reinforcements on RC beams, without the need for empirical formulations to indirectly simulate the tension stiffening. Analysis shows that the tension stiffening of NSM fiber reinforced polymer (FRP) contributes a significant portion to the stiffness and strength of the strengthened RC beam not only during serviceability, but at all load levels.

  20. Damage Localization of Severely Damaged RC-Structures Based on Measured Eigenperiods from a Single Response

    Skjærbæk, P. S.; Nielsen, Søren R.K.; Cakmak, A. S.

    This paper deals with the estimation of the damage location of severely damaged Reinforced Concrete (RC) structures excited by earthquakes. It is assumed that the building is instrumented with a sensor measuring the earthquake acceleration signal at ground surface and a sensor measuring only...

  1. Digital Citizenship

    Isman, Aytekin; Canan Gungoren, Ozlem

    2014-01-01

    Era in which we live is known and referred as digital age.In this age technology is rapidly changed and developed. In light of these technological advances in 21st century, schools have the responsibility of training "digital citizen" as well as a good citizen. Digital citizens must have extensive skills, knowledge, Internet and …

  2. LEITURA E SEUS SUPORTES: papel e digital

    Celso Leopoldo Pagnan; Eliane Provate

    2016-01-01

    Pesquisas pioneiras (Mangen; Walgermo; Brønnick, 2012) têm destacado o modo de ler textos curtos ou livros inteiros em dois suportes: digital e papel. Há uma suposição de que os jovens tendem a preferir a leitura digital ao suporte papel, porém pode não ser uma verdade absoluta, conforme atestam outras pesquisas (PewResearch Center, 2014). Com base em dados desses estudos, bem como na aplicação de testes em alunos do ensino médio, o presente trabalho parte do pressuposto de que o nível de per...

  3. Análise digital do terreno: ferramenta na identificação de pedoformas em microbacia na região de "Mar de Morros" (MG Digital terrain analysis: tool for pedoform identification in the "Mar de Morros" watershed (MG

    Gabriela A. Ippoliti R.

    2005-04-01

    Full Text Available Este trabalho reporta a utilização de ferramentas de um SIG (Sistema de Informação Geográfica para o delineamento das geoformas e pedopaisagens em um estudo de caso em microbacia do município de Viçosa (MG, a partir dos dados da carta topográfica (escala 1:50.000 da região. Trabalhos de campo permitiram aferir uma exatidão global de 72 % na classificação das formas da paisagem e correlacionar as classes obtidas com as classes de solos dominantes. Após ajustes, elaborou-se um mapa síntese preliminar de distribuição de pedoformas, que auxilia no mapeamento de solos. O método de classificação das formas da paisagem baseado na geração de um MNT (Modelo Numérico do Terreno e no cálculo dos atributos do relevo (elevação, declividade, curvatura mostra-se uma alternativa rápida e econômica em comparação ao delineamento manual a partir da utilização de análise estereoscópica de fotografias aéreas.This study reports on the use of GIS (Geographical Information System tools for identifying and mapping landform units and soilscapes in a case study of a watershed in the region of Viçosa, Minas Gerais state, based on a topographical base map at a 1:50000 scale. Field work was undertaken to estimate the degree of accuracy of landform units / soilscape identification, obtaining an agreement of 72 % between the automatic and field work classification, and to correlate obtained soilscapes with dominant soil classes. After adjustments, a preliminary synthesized pedogeomorphic map was produced, which can assist soil mapping. The method of classifying landforms based on a digital elevation model (DEM as well as on the calculation of landform attributes (elevation, slope angle, slope form represents a quick and economic option, compared with manual drawing based on stereoscopical identification of landforms from aerial photographs.

  4. Tomographic reconstruction of storm time RC ion distribution from ENA images on board multiple spacecraft

    Ma, Shu-Ying; Yan, Wei-Nan; Xu, Liang

    2015-11-01

    A quantitative retrieval of 3-D distribution of energetic ions as energetic neutral atoms (ENA) sources is a challenging task. In this paper the voxel computerized tomography (CT) method is initially applied to reconstruct the 3-D distribution of energetic ions in the magnetospheric ring current (RC) region from ENA emission images on board multiple spacecraft. To weaken the influence of low-altitude emission (LAE) on the reconstruction, the LAE-associated ENA intensities are corrected by invoking the thick-target approximation. To overcome the divergence in iteration due to discordant instrument biases, a differential ENA voxel CT method is developed. The method is proved reliable and advantageous by numerical simulation for the case of constant bias independent of viewing angle. Then this method is implemented with ENA data measured by the Two Wide-angle Imaging Neutral-atom Spectrometers mission which performs stereoscopic ENA imaging. The 3-D spatial distributions and energy spectra of RC ion flux intensity are reconstructed for energies of 4-50 keV during the main phase of a major magnetic storm. The retrieved ion flux distributions seem to correspond to an asymmetric partial RC, located mainly around midnight favoring the postmidnight with L = 3.5-7.0 in the equatorial plane. The RC ion distributions with magnetic local time depend on energy, with major equatorial flux peak for lower energy located east of that for higher energy. In comparison with the ion energy spectra measured by Time History of Events and Macroscale Interactions during Substorms-D satellite flying in the RC region, the retrieved spectrum from remotely sensed ENA images are well matched with the in situ measurements.

  5. Shear Strengthening of RC Deep Beam Using Externally Bonded GFRP Fabrics

    Kumari, A.; Patel, S. S.; Nayak, A. N.

    2018-06-01

    This work presents the experimental investigation of RC deep beams wrapped with externally bonded Glass Fibre Reinforced Polymer (GFRP) fabrics in order to study the Load versus deflection behavior, cracking pattern, failure modes and ultimate shear strength. A total number of five deep beams have been casted, which is designed with conventional steel reinforcement as per IS: 456 (Indian standard plain and reinforced concrete—code for practice, Bureau of Indian Standards, New Delhi, 2000). The spans to depth ratio for all RC deep beams have been kept less than 2 as per the above specification. Out of five RC deep beams, one without retrofitting serves as a reference beam and the rest four have been wrapped with GFRP fabrics in multiple layers and tested with two point loading condition. The first cracking load, ultimate load and the shear contribution of GFRP to the deep beams have been observed. A critical discussion is made with respect to the enhancement of the strength, behaviour and performance of retrofitted deep beams in comparison to the deep beam without GFRP in order to explore the potential use of GFRP for strengthening the RC deep beams. Test results have demonstrated that the deep beams retrofitted with GFRP shows a slower development of the diagonal cracks and improves shear carrying capacity of the RC deep beam. A comparative study of the experimental results with the theoretical ones predicted by various researchers available in the literatures has also been presented. It is observed that the ultimate load of the beams retrofitted with GFRP fabrics increases with increase of number of GFRP layers up to a specific number of layers, i.e. 3 layers, beyond which it decreases.

  6. Perbandingan Algoritma Enkripsi GGHN(8,8 dan RC4 Untuk Video Conference

    Satriyo Satriyo

    2012-01-01

    Full Text Available Encryption is a solutions to secure the information transmitted through the medium of communication that can not be intercepted by unauthorized parties. This study implemented two algorithms i.e. RC4 and GGHN (8.8 in video conference. This study compared the speed  of  both  encryption  and  decryption  of  the  encryption  algorithm,  and  perform  measurements  of  bandwidth .  From  the  results  of measurements of the speed can be concluded that the RC4 algorithm is 1.53 times and 1.34 times faster than GGHN(8,8 for encryption and  decryption  audio  data.  The  encryption  and  decryption  video  data  RC4  are  1.44  times  and  1.09  times  faster  than  GHN(8,8. Bandwidth  usage  for  video  conferencing  without  encryption  and  bandwidth  usage  on  a  video  conference  with  RC4  encryption  and GGHN (8.8 is the same.Keywords: Video Conference; RC4; GGHN(8,8; Real Time Protocol.

  7. Digital subtraktion

    Mussmann, Bo Redder

    2004-01-01

    Digital subtraktion er en metode til at fjerne uønskede oplysninger i et røntgenbillede. Subtraktionsteknikken bruges primært i forbindelse med angiografi hvor man kun er interesseret i at se selve karret. Derfor er digital subtraktion i daglig tale synonymt med DSA eller DVI – hhv. Digital...... Subtraction Angiography eller Digital Vascular Imaging. Benævnelserne er to røntgenfirmaers navn for den samme teknik. Digital subtraktion kræver speciel software, samt at apparaturet kan eksponere i serier....

  8. Digital preservation

    Deegan, Marilyn

    2013-01-01

    Digital preservation is an issue of huge importance to the library and information profession right now. With the widescale adoption of the internet and the rise of the world wide web, the world has been overwhelmed by digital information. Digital data is being produced on a massive scale by individuals and institutions: some of it is born, lives and dies only in digital form, and it is the potential death of this data, with its impact on the preservation of culture, that is the concern of this book. So how can information professionals try to remedy this? Digital preservation is a complex iss

  9. RC-IAL: linhagem celular contínua de rim de coelho - características e substrato para replicação de vírus

    Aurea Silveira Cruz; Cristina Adelaide Figueiredo; Maria Luisa Barbosa; Clelia Helena de O. Martinez; Luís Florêncio Salles-Gomes

    1992-01-01

    Uma linhagem celular de rim de coelho (denominada RC-IAL), que foi isolada em 1976, e que atualmente está na 150ª passagem, teve suas características analisadas. As células apresentaram morfologia semelhante aos fibroblastos desde o início de seu cultivo. A proporção de crescimento celular não se alterou desde seu isolamento, com uma eficiência de clonagem ao redor de 9%. A linhagem mostrou crescimento dependente de ancoragem, e a análise cromossômica apresentou o número modal da espécie com ...

  10. Digital Natives or Digital Tribes?

    Watson, Ian Robert

    2013-01-01

    This research builds upon the discourse surrounding digital natives. A literature review into the digital native phenomena was undertaken and found that researchers are beginning to identify the digital native as not one cohesive group but of individuals influenced by other factors. Primary research by means of questionnaire survey of technologies…

  11. Acervos e pesquisas em história da educação: das vitrines do progresso aos desafios da conservação digital - Archives and research in the history of education: from the time of “vitrines do progresso” to the challenge of digital preservation

    Marcia de Paula Gregorio Razzini

    2011-03-01

    artículo apunta formas yposibilidades de pesquisa en el área, así como límites y desafíos, tratando de articular, en el propio texto, algunos recursos digitales.Palabras clave: Acervos; Fuentes; Historia de la Educación. DES ARCHIVES ET DES RECHERCHES DANS L’HISTOIRE DE L’ÉDUCATION: DES LES VITRINES DU PROGRÈS JUSQU’AUX DÉFIS DE LA CONSERVATION DIGITAL Résumé Les années dernières, des recherches et des archives de l’histoire de l’éducation ont reçu des contributions inestimables du média digital, spécialment après la généralisation de l’internet, em configurant un panorama d’accès à des sources et des documents qu’on a jamais entrevus au passe. En confrontant des recherches, des archives et plusieurs sites d’institutions qui gardent des sources et des documents à l’égard de l’histoire de l’éducation, cet article-ci indique des formes et des possibilites de recherche sur lê sujet, ainsi que des limites et des défis, en essayant d’articuler, dans le texte même, quelques resources digitaux. Mots-clé: archives; sources; histoire de l’éducation.

  12. Modelo numérico do terreno obtido por diferentes métodos em cartas planialtimétricas Digital terrain model obtained by different methods in planialtimetric charts

    Ana P. Barbosa

    2012-06-01

    Full Text Available O modelo numérico do terreno é importante para a determinação da declividade e da capacidade de uso das terras, motivo pelo qual foi desenvolvida uma proposta de metodologia de aquisição de dados de elevação que contemple um algoritmo eficiente para a geração de uma carta de declividades; para isto, buscou-se a obtenção e a avaliação de um modelo numérico do terreno sem a prática da vetorização das curvas de nível em cartas planialtimétricas. A área de obtenção dos dados de altitude (m foi no município de São Manuel, SP, onde os dados foram coletados através de dois métodos: vetorização das curvas altimétricas e o método por coleta de pontos de altitude sobre as curvas em nível com os pontos de máxima elevação. Os dados de altimetria (m foram analisados pela técnica geoestatística. Apesar da grande diferença no número de pontos coletados pelos dois métodos, os variogramas foram ajustados ao modelo exponencial e representaram alcance de aproximadamente 1.500 m, o que não justifica a grande dificuldade da vetorização das cartas planialtimétricas, uma vez que os dados pontuais coletados na área foram bem distribuídos e representaram adequadamente a superfície do terreno.The digital elevation model is important to determine the slope and land use capability, therefore, a proposal of methodology for acquisition of elevation data contemplating an efficient algorithm to generate a slope map was developed. Thus, it was aimed to obtain and evaluate a digital elevation model without the vetorization of the contours on planialtimetric charts. The area for acquisition of elevation data was São Manuel, SP. The data were collected by two methods: level contour vetorization and the gathering of elevation points on the level contour with maximum elevation points. The elevation data were analyzed by geostatistical techniques. Inspite of wide difference in the number of collected points between two methods, the

  13. Digital mammography

    Bick, Ulrich; Diekmann, Felix

    2010-01-01

    This state-of-the-art reference book provides in-depth coverage of all aspects of digital mammography, including detector technology, image processing, computer-aided diagnosis, soft-copy reading, digital workflow, and PACS. Specific advantages and disadvantages of digital mammography in comparison to screen-film mammography are thoroughly discussed. By including authors from both North America and Europe, the book is able to outline variations in the use, acceptance, and quality assurance of digital mammography between the different countries and screening programs. Advanced imaging techniques and future developments such as contrast mammography and digital breast tomosynthesis are also covered in detail. All of the chapters are written by internationally recognized experts and contain numerous high-quality illustrations. This book will be of great interest both to clinicians who already use or are transitioning to digital mammography and to basic scientists working in the field. (orig.)

  14. Digital Insights

    Knudsen, Gry Høngsmark

    , by incorporating media as both channel, frame, and apparatus for advertising response, the dissertation brings into attention that more aspects than the text-reader relationship influence ad response. Finally, the dissertation proposes the assemblage approach for exploring big data in consumer culture research...... and practices with digital media, when they meet and interpret advertising. Through studies of advertising response on YouTube and experiments with consumers’ response to digitally manipulated images, the dissertation shows how digital media practices facilitate polysemic and socially embedded advertising......This dissertation forwards the theory of digital consumer-response as a perspective to examine how digital media practices influence consumers’ response to advertising. Digital consumer-response is a development of advertising theory that encompasses how consumers employ their knowledge...

  15. Mouse RC/BTB2, a Member of the RCC1 Superfamily, Localizes to Spermatid Acrosomal Vesicles

    Shen, Xuening; Nagarkatti-Gude, David R.; Hess, Rex A.; Henderson, Scott C.; Strauss, Jerome F.; Zhang, Zhibing

    2012-01-01

    Mouse RC/BTB2 is an unstudied protein of the RCC1 (Regulator of Chromosome Condensation) superfamily. Because of the significant remodeling of chromatin that occurs during spermiogenesis, we characterized the expression and localization of mouse RC/BTB2 in the testis and male germ cells. The Rc/btb2 gene yields two major transcripts: 2.3 kb Rc/btb2-s, present in most somatic tissues examined; and 2.5 kb Rc/btb2-t, which contains a unique non-translated exon in its 5′-UTR that is only detected in the testis. During the first wave of spermatogenesis, Rc/btb2-t mRNA is expressed from day 8 after birth, reaching highest levels of expression at day 30 after birth. The full-length protein contains three RCC1 domains in the N-terminus, and a BTB domain in the C-terminus. In the testis, the protein is detectable from day 12, but is progressively up-regulated to day 30 and day 42 after birth. In spermatids, some of the protein co-localizes with acrosomal markers sp56 and peanut lectin, indicating that it is an acrosomal protein. A GFP-tagged RCC1 domain is present throughout the cytoplasm of transfected CHO cells. However, both GFP-tagged, full-length RC/BTB2 and a GFP-tagged BTB domain localize to vesicles in close proximity to the nuclear membrane, suggesting that the BTB domain might play a role in mediating full-length RC/BTB2 localization. Since RCC1 domains associate with Ran, a small GTPase that regulates molecular trafficking, it is possible that RC/BTB2 plays a role in transporting proteins during acrosome formation. PMID:22768142

  16. Digital Signage

    Fischer, Karl Peter

    2011-01-01

    Digital Signage for in-store advertising at gas stations/retail stores in Germany: A field study Digital Signage networks provide a novel means of advertising with the advantage of easily changeable and highly customizable animated content. Despite the potential and increasing use of these media empirical research is scarce. In a field study at 8 gas stations (with integrated convenience stores) we studied the effect of digital signage advertising on sales for different products and servi...

  17. Sports Digitalization

    Xiao, Xiao; Hedman, Jonas; Tan, Felix Ter Chian

    2017-01-01

    evolution, as digital technologies are increasingly entrenched in a wide range of sporting activities and for applications beyond mere performance enhancement. Despite such trends, research on sports digitalization in the IS discipline is surprisingly still nascent. This paper aims at establishing...... a discourse on sports digitalization within the discipline. Toward this, we first provide an understanding of the institutional characteristics of the sports industry, establishing its theoretical importance and relevance in our discipline; second, we reveal the latest trends of digitalization in the sports...

  18. Digital printing

    Sobotka, Werner K.

    1997-02-01

    Digital printing is described as a tool to replace conventional printing machines completely. Still this goal was not reached until now with any of the digital printing technologies to be described in the paper. Productivity and costs are still the main parameters and are not really solved until now. Quality in digital printing is no problem anymore. Definition of digital printing is to transfer digital datas directly on the paper surface. This step can be carried out directly or with the use of an intermediate image carrier. Keywords in digital printing are: computer- to-press; erasable image carrier; image carrier with memory. Digital printing is also the logical development of the new digital area as it is pointed out in Nicholas Negropotes book 'Being Digital' and also the answer to networking and Internet technologies. Creating images text and color in one country and publishing the datas in another country or continent is the main advantage. Printing on demand another big advantage and last but not least personalization the last big advantage. Costs and being able to coop with this new world of prepress technology is the biggest disadvantage. Therefore the very optimistic growth rates for the next few years are really nonexistent. The development of complete new markets is too slow and the replacing of old markets is too small.

  19. Learning Abstract Physical Concepts from Experience: Design and Use of an RC Circuit

    Parra, Alfredo; Ordenes, Jorge; de la Fuente, Milton

    2018-05-01

    Science learning for undergraduate students requires grasping a great number of theoretical concepts in a rather short time. In our experience, this is especially difficult when students are required to simultaneously use abstract concepts, mathematical reasoning, and graphical analysis, such as occurs when learning about RC circuits. We present a simple experimental model in this work that allows students to easily design, build, and analyze RC circuits, thus providing an opportunity to test personal ideas, build graphical descriptions, and explore the meaning of the respective mathematical models, ultimately gaining a better grasp of the concepts involved. The result suggests that the simple setup indeed helps untrained students to visualize the essential points of this kind of circuit.

  20. Flexural repair/strengthening of pre-damaged R.C. beams using embedded CFRP rods

    Alaa M. Morsy

    2015-12-01

    Full Text Available Many reinforced concrete R.C. elements need either strengthening due to the need of increasing the service loads or repair due to overloading stress or environmental deterioration affecting these elements. In this paper an experimental program is presented to investigate the effect of using embedded CFRP rod as NSM reinforcement for strengthening/repairing R.C. beams pre-damaged by loading to different loading levels and comparing the results to those of non-preloaded beams. A total of five beams were cast and six beams were tested under four point loading. The main objective of this paper was to investigate the effect of providing one 12 mm diameter CFRP rod in addition to the existing steel reinforcement. Three beams were tested to failure directly without any preloading, whereas the other three beams were firstly subjected to preloading to different load levels. Following that these three beams were strengthened and were tested up to failure.

  1. Development of a relational database for nuclear material (NM) accounting in RC and I Group

    Yadav, M.B.; Ramakumar, K.L.; Venugopal, V.

    2011-01-01

    A relational database for the nuclear material accounting in RC and I Group has been developed with MYSQL for Back-End and JAVA for Front-End development. Back-End has been developed to avoid any data redundancy, to provide random access of the data and to retrieve the required information from database easily. JAVA Applet and Java Swing components of JAVA programming have been used in the Front-End development. Front-End has been developed to provide data security, data integrity, to generate inventory status report at the end of accounting period, and also to have a quick look of some required information on computer screen. The database has been tested for the data of three quarters of the year 2009. It has been implemented from 1st January, 2010 for the accounting of nuclear material in RC and I Group. (author)

  2. Development of a relational database for nuclear material (NM) accounting in RC and I Group

    Yadav, M B; Ramakumar, K L; Venugopal, V [Radioanalytical Chemistry Division, Radiochemistry and Isotope Group, Bhabha Atomic Research Centre, Mumbai (India)

    2011-07-01

    A relational database for the nuclear material accounting in RC and I Group has been developed with MYSQL for Back-End and JAVA for Front-End development. Back-End has been developed to avoid any data redundancy, to provide random access of the data and to retrieve the required information from database easily. JAVA Applet and Java Swing components of JAVA programming have been used in the Front-End development. Front-End has been developed to provide data security, data integrity, to generate inventory status report at the end of accounting period, and also to have a quick look of some required information on computer screen. The database has been tested for the data of three quarters of the year 2009. It has been implemented from 1st January, 2010 for the accounting of nuclear material in RC and I Group. (author)

  3. Experimental study on fatigue crack propagation rate of RC beam strengthened with carbon fiber laminate

    Huang, Peiyan; Liu, Guangwan; Guo, Xinyan; Huang, Man

    2008-11-01

    The experimental research on fatigue crack propagation rate of reinforced concrete (RC) beams strengthened with carbon fiber laminate (CFL) is carried out by MTS system in this paper. The experimental results show that, the main crack propagation on strengthened beam can be summarized into three phases: 1) fast propagation phase; 2) steady propagation and rest phase; 3) unsteady propagation phase. The phase 2-i.e. steady propagation and rest stage makes up about 95% of fatigue life of the strengthened beam. The propagation rate of the main crack, da/dN, in phase 2 can be described by Paris formula, and the constant C and m can be confirmed by the fatigue crack propagation experiments of the RC beams strengthened with CFL under three-point bending loads.

  4. Development of Shear Capacity Prediction Model for FRP-RC Beam without Web Reinforcement

    Md. Arman Chowdhury

    2016-01-01

    Full Text Available Available codes and models generally use partially modified shear design equation, developed earlier for steel reinforced concrete, for predicting the shear capacity of FRP-RC members. Consequently, calculated shear capacity shows under- or overestimation. Furthermore, in most models some affecting parameters of shear strength are overlooked. In this study, a new and simplified shear capacity prediction model is proposed considering all the parameters. A large database containing 157 experimental results of FRP-RC beams without shear reinforcement is assembled from the published literature. A parametric study is then performed to verify the accuracy of the proposed model. Again, a comprehensive review of 9 codes and 12 available models is done, published back from 1997 to date for comparison with the proposed model. Hence, it is observed that the proposed equation shows overall optimized performance compared to all the codes and models within the range of used experimental dataset.

  5. Understanding of self-terminating pulse generation using silicon controlled rectifier and RC load

    Chang, Chris, E-mail: chrischang81@gmail.com; Karunasiri, Gamani, E-mail: karunasiri@nps.edu [Department of Physics, Naval Postgraduate School, Monterey, CA 93943 (United States); Alves, Fabio, E-mail: falves@alionscience.com [Alion Science and Technology at NPS, Monterey, CA 93943 (United States)

    2016-01-15

    Recently a silicon controlled rectifier (SCR)-based circuit that generates self-terminating voltage pulses was employed for the detection of light and ionizing radiation in pulse mode. The circuit consisted of a SCR connected in series with a RC load and DC bias. In this paper, we report the investigation of the physics underlying the pulsing mechanism of the SCR-based. It was found that during the switching of SCR, the voltage across the capacitor increased beyond that of the DC bias, thus generating a reverse current in the circuit, which helped to turn the SCR off. The pulsing was found to be sustainable only for a specific range of RC values depending on the SCR’s intrinsic turn-on/off times. The findings of this work will help to design optimum SCR based circuits for pulse mode detection of light and ionizing radiation without external amplification circuitry.

  6. A 500-600 MHz GaN power amplifier with RC-LC stability network

    Ma, Xinyu; Duan, Baoxing; Yang, Yintang

    2017-08-01

    A 500-600 MHz high-efficiency, high-power GaN power amplifier is designed and realized on the basis of the push-pull structure. The RC-LC stability network is proposed and applied to the power amplifier circuit for the first time. The RC-LC stability network can significantly reduce the high gain out the band, which eliminates the instability of the power amplifier circuit. The developed power amplifier exhibits 58.5 dBm (700 W) output power with a 17 dB gain and 85% PAE at 500-600 MHz, 300 μs, 20% duty cycle. It has the highest PAE in P-band among the products at home and abroad. Project supported by the National Key Basic Research Program of China (No. 2014CB339901).

  7. The response of an RC line MWPC to primary cosmic rays. [Multi-Wire Proportional Counter

    Gregory, J. C.; Selig, W. J.; Austin, R. W.; Derrickson, J. H.; Parnell, T. A.

    1978-01-01

    A simple 50 x 50 sq cm MWPC plane was arranged as an RC-line and flown on a balloon flight with the MSFC-UAH Cosmic Ray experiment. Positions of primary cosmic ray tracks in the RC-line were determined by the risetime method and compared with the expected position as indicated by a best line fitted through four planes of the conventional MWPC hodoscope. Mean errors were estimated for sea-level muons, and CNO group and iron group particles. It is believed that the delta-rays accompanying the primaries degraded the position resolution. Measured standard deviations allowing for uncertainty in the true track position are of the order of 1 cm or less in the primary charge region between 7 and 26.

  8. Behavior of Insulated Carbon-FRP-Strengthened RC Beams Exposed to Fire

    Sayin, B.

    2014-09-01

    There are two main approaches to improving the fire resistance of fiber-reinforced polymer (FRP) systems. While the most common method is to protect or insulate the FRP system, an other way is to use fibers and resins with a better fire performance. This paper presents a numerical investigation into the five protection behavior of insulated carbon-fiber-reinforced-polymer (CFRP)-strengthened reinforced concrete (RC) beams. The effects of external loading and thermal expansion of materials at elevated temperatures are taken into consideration in a finite-element model. The validity of the numerical model is demonstrated with results from an existing experimental study on insulated CFRP-strengthened RC beams. Conclusions of this investigation are employed to predict the structural behavior of CFRP-strengthened concrete structures.

  9. RC structures strengthened by metal shear panels: experimental and numerical analysis

    De Matteis, G.; Formisano, A.; Mazzolani, F. M.

    2008-01-01

    Metal shear panels (MSPs) may be effectively used as a lateral load resisting system for framed structures. In the present paper, such a technique is applied for the seismic protection of existing RC buildings, by setting up a specific design procedure, which has been developed on the basis of preliminary full-scale experimental tests. The obtained results allowed the development of both simplified and advanced numerical models of both the upgraded structure and the applied shear panels. Also, the proposed design methodology, which is framed in the performance base design philosophy, has been implemented for the structural upgrading of a real Greek existing multi-storey RC building. The results of the numerical analysis confirmed the effectiveness of the proposed technique, also emphasising the efficiency of the implemented design methodology

  10. Flexural Behavior of RC Slabs Strengthened in Flexure with Basalt Fabric-Reinforced Cementitious Matrix

    Sugyu Lee

    2018-01-01

    Full Text Available This paper presents both experimental and analytical research results for predicting the flexural capacity of reinforced concrete (RC slabs strengthened in flexure with basalt fabric-reinforced cementitious matrix (FRCM. A total of 13 specimens were fabricated to evaluate the flexural behavior of RC slabs strengthened with basalt FRCM composite and were tested under four-point loading. The fiber type, tensile reinforcement ratio, and the number of fabric layers were chosen as experimental variables. The maximum load of FRCM-strengthened specimens increased from 11.2% to 98.2% relative to the reference specimens. The energy ratio and ductility of the FRCM-strengthened specimens decreased with the higher amount of fabric and tensile reinforcement. The effective stress level of FRCM fabric can be accurately predicted by a bond strength of ACI 549 and Jung’s model.

  11. Homogenized global nonlinear constitutive model for RC panels under cyclic loadings

    Huguet, Miquel; Voldoire, Francois; Kotronis, Panagiotis; Erlicher, Silvano

    2014-01-01

    A new nonlinear stress resultant global constitutive model for RC panels is presented. Concrete damage, concrete stress transfer at cracks and bond-slip stress are the main nonlinear effects identified at the local scale that constitute the basis for the construction of the stress resultant global model through an analytical homogenization technique. The closed form solution is obtained using general functions for the previous phenomena. (authors)

  12. Dynamics model for real time diagnostics of Triga RC-1 system

    Gadomski, A.M.; Nanni, V.; Meo, G.

    1988-01-01

    This paper presents dynamics model of TRIGA RC-1 reactor system. The model is dedicated to the real-time early fault detection during a reactor operation in one week exploitation cycle. The algorithms are specially suited for real-time, long time and also accelerated simulations with assumed diagnostic oriented accuracy. The approximations, modular structure, numerical methods and validation are discussed. The elaborated model will be build in the TRIGA Supervisor System and TRIGA Diagnostic Simulator

  13. Hysteretic MDOF Model to Quantify Damage for RC Shear Frames Subject to Earthquakes

    Köylüoglu, H. Ugur; Nielsen, Søren R.K.; Cakmak, Ahmet S.

    A hysteretic mechanical formulation is derived to quantify local, modal and overall damage in reinforced concrete (RC) shear frames subject to seismic excitation. Each interstorey is represented by a Clough and Johnston (1966) hysteretic constitutive relation with degrading elastic fraction of th...... shear frame is subject to simulated earthquake excitations, which are modelled as a stationary Gaussian stochastic process with Kanai-Tajimi spectrum, multiplied by an envelope function. The relationship between local, modal and overall damage indices is investigated statistically....

  14. ENEA TRIGA RC-1 reactor activities in the fields of nuclear medicine and neutron radiography

    Chiesa, Gianni; Festinesi, Armando; Palomba, Mario; Rosa, Roberto; Rossi, Gabriela; Sangiovanni, Gino; Santoro, Emilio; Sedda, Antioco Franco; Storelli, Lucio

    2008-01-01

    In the last three years, TRIGA RC-1 plant staff is involved in collaborations with some roman hospitals for the production of particular radioisotopes for the diagnosis and therapy in the field of human cancer. Further, the thermal column of TRIGA reactor has been prepared for neutron radiography and tomography. For another channel, instruments and equipment above neutron radiography and tomography are in preparation phase. This paper includes an overview of the experimental equipment properly developed by TRIGA staff. (authors)

  15. RC2S: a cognitive remediation program to improve social cognition in schizophrenia and related disorders

    Elodie ePEYROUX

    2014-06-01

    Full Text Available In people with psychiatric disorders, particularly those suffering from schizophrenia and related illnesses, pronounced difficulties in social interactions are a key manifestation. These difficulties can be partly explained by impairments in social cognition, defined as the ability to understand oneself and others in the social world, which includes abilities such as emotion recognition, theory of mind, attributional style, and social perception and knowledge. The impact of several kinds of interventions on social cognition has been studied recently. The best outcomes in the area of social cognition in schizophrenia are those obtained by way of cognitive remediation programs. New strategies and programs in this line are currently being developed, such as RC2S (Cognitive Remediation of Social Cognition in Lyon, France. Considering that the social cognitive deficits experienced by patients with schizophrenia are very diverse, and that the main objective of social cognitive remediation programs is to improve patients’ functioning in their daily social life, RC2S was developed as an individualized and flexible program that allows patients to practice social interaction in a realistic environment through the use of virtual-reality techniques. In the RC2S program, the patient’s goal is to assist a character named Tom in various social situations. The underlying idea for the patient is to acquire cognitive strategies for analyzing social context and emotional information in order to understand other characters’ mental states and to help Tom manage his social interactions. In this paper, we begin by presenting some data regarding the social cognitive impairments found in schizophrenia and related disorders, and we describe how these deficits are targeted by social cognitive remediation. Then we present the RC2S program and discuss the advantages of computer-based simulation to improve social cognition and social functioning in people with

  16. Sustainable RC Beam-Column Connections with Headed Bars: A Formula for Shear Strength Evaluation

    Minh-Tung Tran

    2018-02-01

    Full Text Available Beam-column joints are critical regions for reinforced concrete (RC frames subjected to earthquakes. The steel reinforcement is, in general, highly concentrated in these zones. This is why in many cases, headed bars are used. A headed bar is a longitudinal steel reinforcement whose end has a special button added to reduce the bonding length of the steel rebar. This paper establishes a formula predicting the shear strength of exterior RC beam-column connections where the beam longitudinal reinforcements use headed bars. A database was collected, which contained 30 experimental data about the exterior beam-column joints using headed bars and subjected to quasi-static cyclic loading. First, from the collected database, a statistical study was carried out to identify the most influencing parameters on the shear strength of the beam-column joints tested. The three most important parameters were identified and an empirical modified formula was developed based on the formula existing in the standards. The study showed that the results obtained from the modified formula proposed in the present study were closer to the experimental results than that obtained from the formula existing in the standards. Finally, a numerical study was performed on two T-form RC structures and the numerical results were compared with the prediction calculated from the modified formula proposed. For two investigated cases, the proposed formula provided the results in the safety side and the differences with the numerical results were less than 20%. Thus, the proposed formula can be used for a rapid assessment of the shear strength of RC joints using headed bars.

  17. Loads experiments study on two-story RC box and truncated conical walls

    Asega, H.; Iizuka, S.; Kurihara, I.; Kubo, T.

    1987-01-01

    The failure modes of the two specimens were the sliding shear failure. The two specimens showed almost equal deformation at the maximum shear strength. The ratio of the flexural deformation in the deformation of the truncated conical was larger than that of the box wall. The ratio of the shear deformation in the deformation of the two-story RC box wall was larger than that of the flexural deformation. (orig./HP)

  18. A proposal for seismic evaluation index of mid-rise existing RC buildings in Afghanistan

    Naqi, Ahmad; Saito, Taiki

    2017-10-01

    Mid-rise RC buildings gradually rise in Kabul and entire Afghanistan since 2001 due to rapid increase of population. To protect the safety of resident, Afghan Structure Code was issued in 2012. But the building constructed before 2012 failed to conform the code requirements. In Japan, new sets of rules and law for seismic design of buildings had been issued in 1981 and severe earthquake damage was disclosed for the buildings designed before 1981. Hence, the Standard for Seismic Evaluation of RC Building published in 1977 has been widely used in Japan to evaluate the seismic capacity of existing buildings designed before 1981. Currently similar problem existed in Afghanistan, therefore, this research examined the seismic capacity of six RC buildings which were built before 2012 in Kabul by applying the seismic screening procedure presented by Japanese standard. Among three screening procedures with different capability, the less detailed screening procedure, the first level of screening, is applied. The study founds an average seismic index (IS-average=0.21) of target buildings. Then, the results were compared with those of more accurate seismic evaluation procedures of Capacity Spectrum Method (CSM) and Time History Analysis (THA). The results for CSM and THA show poor seismic performance of target buildings not able to satisfy the safety design limit (1/100) of the maximum story drift. The target buildings are then improved by installing RC shear walls. The seismic indices of these retrofitted buildings were recalculated and the maximum story drifts were analyzed by CSM and THA. The seismic indices and CSM and THA results are compared and found that building with seismic index larger than (IS-average =0.4) are able to satisfy the safety design limit. Finally, to screen and minimize the earthquake damage over the existing buildings, the judgement seismic index (IS-Judgment=0.5) for the first level of screening is proposed.

  19. Comparative Analysis of Existing RC Columns Jacketed with CFRP or FRCC

    Marta Del Zoppo

    2018-03-01

    Full Text Available Reinforced concrete (RC columns typical of existing structures often exhibit premature failures during seismic events (i.e., longitudinal bars buckling and shear interaction mechanisms due to the poor quality concrete and the absence of proper seismic details in the potential plastic hinge region. The Fiber Reinforced Polymers (FRP externally bonded reinforcement is known to be a valid technique to improve the shear capacity or the ductility of existing RC columns. However, few experimental tests have proven its effectiveness in the case of columns affected by shear interaction mechanisms. In this work, the behavior of existing RC columns with border line behavior between flexure and shear have been investigated in the case of poor quality concrete and light FRP strengthening with local jacketing and medium quality concrete and strong FRP strengthening with local jacketing, in order to highlight the effect of concrete strength on the effectiveness of the retrofit intervention. As an alternative to FRP jacketing; the effectiveness of the Fiber Reinforced Cementitious Composite (FRCC jacketing for the seismic strengthening of columns with highly deteriorated concrete cover or columns already damaged by an earthquake is also evaluated. Six full-scale RC columns have been tested under cyclic loading: one was used as a control specimen; four were strengthened in the potential plastic hinge region with carbon FRP (CFRP; and one was fully jacketed with FRCC. The comparison between poor and medium quality concrete columns showed that the CFRP local jacketing is more effective in the case of poor quality concrete. The FRCC jacketing appears to be a sound repair strategy and a suitable alternative to the FRP jacketing in case of poor quality; however, more experimental research is needed for improving this retrofit technique.

  20. A three-layer distributed RC network with two transmission zeros

    Huelsman, L. P.

    1974-01-01

    This report describes the properties of a three-layer distributed RC network consisting of two resistive layers separated by a dielectric which may be used to realize two zeros of transmission on the j-omega axis of the complex frequency plane. The relative location of the two zeros is controlled by the location of a contact placed on one of the resistive layers.

  1. Risk Quantification for Sustaining Coastal Military Installation Asset and Mission Capabilities (RC-1701)

    2014-06-06

    5a. CONTRACT NUMBER Risk Quantification for Sustaining Coastal Military Installation Asset and Mission Capabilities (RC-1701) 5b. GRANT NUMBER...Planetary Boundary Layer (PBL) wind model TC96 (Thompson and Cardone 1996), 2) Surge has been simulated using the ADvanced CIRCulation model ADCIRC...coefficient, and h is the depth of the PBL (Thompson and Cardone 1996). The cyclone pressure is defined by an axisymmetrical exponential pressure or by

  2. RC2S: A Cognitive Remediation Program to Improve Social Cognition in Schizophrenia and Related Disorders.

    Peyroux, Elodie; Franck, Nicolas

    2014-01-01

    In people with psychiatric disorders, particularly those suffering from schizophrenia and related illnesses, pronounced difficulties in social interactions are a key manifestation. These difficulties can be partly explained by impairments in social cognition, defined as the ability to understand oneself and others in the social world, which includes abilities such as emotion recognition, theory of mind (ToM), attributional style, and social perception and knowledge. The impact of several kinds of interventions on social cognition has been studied recently. The best outcomes in the area of social cognition in schizophrenia are those obtained by way of cognitive remediation programs. New strategies and programs in this line are currently being developed, such as RC2S (cognitive remediation of social cognition) in Lyon, France. Considering that the social cognitive deficits experienced by patients with schizophrenia are very diverse, and that the main objective of social cognitive remediation programs is to improve patients' functioning in their daily social life, RC2S was developed as an individualized and flexible program that allows patients to practice social interaction in a realistic environment through the use of virtual reality techniques. In the RC2S program, the patient's goal is to assist a character named Tom in various social situations. The underlying idea for the patient is to acquire cognitive strategies for analyzing social context and emotional information in order to understand other characters' mental states and to help Tom manage his social interactions. In this paper, we begin by presenting some data regarding the social cognitive impairments found in schizophrenia and related disorders, and we describe how these deficits are targeted by social cognitive remediation. Then we present the RC2S program and discuss the advantages of computer-based simulation to improve social cognition and social functioning in people with psychiatric disorders.

  3. RC2S: A Cognitive Remediation Program to Improve Social Cognition in Schizophrenia and Related Disorders

    Peyroux, Elodie; Franck, Nicolas

    2014-01-01

    In people with psychiatric disorders, particularly those suffering from schizophrenia and related illnesses, pronounced difficulties in social interactions are a key manifestation. These difficulties can be partly explained by impairments in social cognition, defined as the ability to understand oneself and others in the social world, which includes abilities such as emotion recognition, theory of mind (ToM), attributional style, and social perception and knowledge. The impact of several kinds of interventions on social cognition has been studied recently. The best outcomes in the area of social cognition in schizophrenia are those obtained by way of cognitive remediation programs. New strategies and programs in this line are currently being developed, such as RC2S (cognitive remediation of social cognition) in Lyon, France. Considering that the social cognitive deficits experienced by patients with schizophrenia are very diverse, and that the main objective of social cognitive remediation programs is to improve patients’ functioning in their daily social life, RC2S was developed as an individualized and flexible program that allows patients to practice social interaction in a realistic environment through the use of virtual reality techniques. In the RC2S program, the patient’s goal is to assist a character named Tom in various social situations. The underlying idea for the patient is to acquire cognitive strategies for analyzing social context and emotional information in order to understand other characters’ mental states and to help Tom manage his social interactions. In this paper, we begin by presenting some data regarding the social cognitive impairments found in schizophrenia and related disorders, and we describe how these deficits are targeted by social cognitive remediation. Then we present the RC2S program and discuss the advantages of computer-based simulation to improve social cognition and social functioning in people with psychiatric disorders

  4. A hybrid Rankine cycle (HyRC) with ambient pressure combustion (APC)

    Wu, Lijun; Thimsen, David; Clements, Bruce; Zheng, Ligang; Pomalis, Richard

    2014-01-01

    The main losses in thermal power generation include heat in exhaust flue gas, heat rejected through steam condensation of low-pressure turbine, and exergy destruction in heat exchange process etc. To the extent that the heat losses are significantly greater in temperature than either air or water coolant resources, these losses also represent exergy losses which might be exploited to improve plant capacity and efficiency. This paper presents a hybrid Rankine cycle (HyRC) with an ambient pressure combustion (APC) boiler to address the recovery potential of these losses within the steam Rankine cycle (SRC). The APC–HyRC concept employs an organic Rankine cycle (ORC) to supplement SRC and to reduce cycle energy losses to the atmosphere since organic fluids are capable of lowering cycle condensation temperature when a very low temperature heat sink is available. The case studies based on a 399 MW SRC unit show that the APC–HyRC configurations have better thermodynamic performance than its base case SRC at a cycle condensation temperature of 30 °C and below. The best APC–HyRC configuration generates up to 14% more power than the baseline steam cycle which is a 5.45% increase in overall gross efficiency with a cycle condensation temperature at 4 °C. - Highlights: • A hybrid Rankine cycle with water and organic fluid is presented. • Heat losses in exhaust flue gas and exhaust steam are reduced. • Exergy losses in regeneration process are reduced. • Efficiency improvements are made to the conventional steam Rankine cycle. • Issues in design/construction of greenfield and repowering project are discussed

  5. Dynamics model for real time diagnostics of TRIGA RC-1 system

    Gadomski, A.M.; Nanni, V.; Meo, G.B.

    1986-01-01

    This paper presents dynamics model of TRIGA RC-1 reactor system. The model is dedicated to the real-time early fault detection during a reactor operation in one week exploitation cycle. The algorithms are specially suited for real-time, long time and also accelerated simulations with assumed diagnostic oriented accuracy. The approximations, modular structure, numerical methods and validation are discussed. The elaborated model will be build in the TRIGA Supervisory System and TRIGA Diagnostic Simulator. (author)

  6. Impact of Cyclic Loading on Chloride Diffusivity and Mechanical Performance of RC Beams under Seawater Corrosion

    Sen Pang

    2017-01-01

    Full Text Available An experimental study was conducted to investigate the impact of cyclic loading on the mechanical performance and chloride diffusivity of RC beams exposed to seawater wet-dry cycles. To induce initial damage to RC beam specimen, cyclic loading controlled by max load and cycles was applied. Then beam specimens underwent 240 wet-dry cycles of seawater. Results show that the chloride content increased as max load and cycle increased. The chloride content at steel surface increased approximatively linearly as average crack width increased. Moreover, the max load had more influence on chloride content at steel surface than cycle. The difference of average chloride diffusion coefficient between tension and compression concrete was little at uncracked position. Average chloride diffusion coefficient increased as crack width increased when crack width was less than 0.11 mm whereas the increasing tendency was weak when crack width exceeded 0.11 mm. The residual yield load and ultimate load of RC beams decreased as max load and cycle increased. Based on univariate analysis of variance, the max load had more adverse effect on yield load and ultimate load than cycle.

  7. Evaluation of Structural Robustness against Column Loss: Methodology and Application to RC Frame Buildings.

    Bao, Yihai; Main, Joseph A; Noh, Sam-Young

    2017-08-01

    A computational methodology is presented for evaluating structural robustness against column loss. The methodology is illustrated through application to reinforced concrete (RC) frame buildings, using a reduced-order modeling approach for three-dimensional RC framing systems that includes the floor slabs. Comparisons with high-fidelity finite-element model results are presented to verify the approach. Pushdown analyses of prototype buildings under column loss scenarios are performed using the reduced-order modeling approach, and an energy-based procedure is employed to account for the dynamic effects associated with sudden column loss. Results obtained using the energy-based approach are found to be in good agreement with results from direct dynamic analysis of sudden column loss. A metric for structural robustness is proposed, calculated by normalizing the ultimate capacities of the structural system under sudden column loss by the applicable service-level gravity loading and by evaluating the minimum value of this normalized ultimate capacity over all column removal scenarios. The procedure is applied to two prototype 10-story RC buildings, one employing intermediate moment frames (IMFs) and the other employing special moment frames (SMFs). The SMF building, with its more stringent seismic design and detailing, is found to have greater robustness.

  8. A new NASA LaRC Multi-Purpose Prepregging Unit

    Wilkinson, S. P.; Marchello, J. M.; Dixon, D.; Johnston, N. J.

    1993-01-01

    A multi-purpose prepregging machine has been designed and built for NASA Langley Research Center. The machine has numerous advantages over existing units due to its various modular components. Each of these can be used individually or simultaneously depending on the required prepregging method. A reverse roll coater provides the ability to prepare thin films from typical hot-melt thermoset formulations. Also, if necessary, the design allows direct fiber impregnation within the reverse roll coater gap. Included in the impregnation module is a solution dip tank allowing the fabrication of thermoplastic prepregs from solution. The proceeding modules within the unit consist of four nip stations, two hot-plates, a hot-sled option and a high temperature oven. This paper describes the advantages of such a modular construction and discusses the various processing combinations available to the prepregger. A variety of high performance prepreg material systems were produced on IM7 (Hercules) carbon fiber. These included LaRC RP46, a PMR-type resin processed from methanol and two polyamide acids, LaRC IA and LaRC ITPI, prpregged from N-methyl pyrrolidinone (NMP). Parameters involved in the production of these prepreg materials are presented as are the mechanical properties of the resulting good quality laminates. A brief introduction into the existing prepregging science is presented. Topics relating to solution prepregging are identified with a focus on the current research effort and its future development.

  9. A Novel Image Encryption Scheme Based on Intertwining Chaotic Maps and RC4 Stream Cipher

    Kumari, Manju; Gupta, Shailender

    2018-03-01

    As the systems are enabling us to transmit large chunks of data, both in the form of texts and images, there is a need to explore algorithms which can provide a higher security without increasing the time complexity significantly. This paper proposes an image encryption scheme which uses intertwining chaotic maps and RC4 stream cipher to encrypt/decrypt the images. The scheme employs chaotic map for the confusion stage and for generation of key for the RC4 cipher. The RC4 cipher uses this key to generate random sequences which are used to implement an efficient diffusion process. The algorithm is implemented in MATLAB-2016b and various performance metrics are used to evaluate its efficacy. The proposed scheme provides highly scrambled encrypted images and can resist statistical, differential and brute-force search attacks. The peak signal-to-noise ratio values are quite similar to other schemes, the entropy values are close to ideal. In addition, the scheme is very much practical since having lowest time complexity then its counterparts.

  10. Friction correction for model ship resistance and propulsion tests in ice at NRC's OCRE-RC

    Michael Lau

    2018-05-01

    Full Text Available This paper documents the result of a preliminary analysis on the influence of hull-ice friction coefficient on model resistance and power predictions and their correlation to full-scale measurements. The study is based on previous model-scale/full-scale correlations performed on the National Research Council - Ocean, Coastal, and River Engineering Research Center's (NRC/OCRE-RC model test data. There are two objectives for the current study: (1 to validate NRC/OCRE-RC's modeling standards in regarding to its practice of specifying a CFC (Correlation Friction Coefficient of 0.05 for all its ship models; and (2 to develop a correction methodology for its resistance and propulsion predictions when the model is prepared with an ice friction coefficient slightly deviated from the CFC of 0.05. The mean CFC of 0.056 and 0.050 for perfect correlation as computed from the resistance and power analysis, respectively, have justified NRC/OCRE-RC's selection of 0.05 for the CFC of all its models. Furthermore, a procedure for minor friction corrections is developed. Keywords: Model test, Ice resistance, Power, Friction correction, Correlation friction coefficient

  11. Effect of Large Negative Phase of Blast Loading on Structural Response of RC Elements

    Syed Zubair Iman

    2016-01-01

    Full Text Available Structural response of reinforced concrete (RC elements for analysis and design are often obtained using the positive phase of the blast pressure curve disregarding the negative phase assuming insignificant contribution from the negative phase of the loading. Although, some insight on the effect of negative phase of blast pressure based on elastic single-degree-of-freedom (SDOF analysis was presented before, the influence of negative phase on different types of resistance functions of SDOF models and on realistic finite element analysis has not been explored. In this study, the effects of inclusion of pulse negative phase on structural response of RC elements from SDOF analysis and from more detailed finite element analysis have been investigated. Investigation of SDOF part has been conducted using MATLAB code that utilizes non-linear resistance functions of SDOF model. Detailed numerical investigation using finite element code DIANA was conducted on the significance of the negative phase on structural response. In the FE model, different support stiffness was used to explore the effect of support stiffness on the structural response due to blast negative phase. Results from SDOF and FE analyses present specific situations where the effect of large negative phase was found to be significant on the structural response of RC elements.

  12. The IL-17F/IL-17RC Axis Promotes Respiratory Allergy in the Proximal Airways

    Antonella De Luca

    2017-08-01

    Full Text Available The interleukin 17 (IL-17 cytokine and receptor family is central to antimicrobial resistance and inflammation in the lung. Mice lacking IL-17A, IL-17F, or the IL-17RA subunit were compared with wild-type mice for susceptibility to airway inflammation in models of infection and allergy. Signaling through IL-17RA was required for efficient microbial clearance and prevention of allergy; in the absence of IL-17RA, signaling through IL-17RC on epithelial cells, predominantly by IL-17F, significantly exacerbated lower airway Aspergillus or Pseudomonas infection and allergic airway inflammation. In contrast, following infection with the upper respiratory pathogen Staphylococcus aureus, the IL-17F/IL-17RC axis mediated protection. Thus, IL-17A and IL-17F exert distinct biological effects during pulmonary infection; the IL-17F/IL-17RC signaling axis has the potential to significantly worsen pathogen-associated inflammation of the lower respiratory tract in particular, and should be investigated further as a therapeutic target for treating pathological inflammation in the lung.

  13. Direct displacement-based design of special composite RC shear walls with steel boundary elements

    H. Kazemi

    2016-06-01

    Full Text Available Special composite RC shear wall (CRCSW with steel boundary elements is a kind of lateral force resisting structural system which is used in earthquake-prone regions. Due to their high ductility and energy dissipation, CRCSWs have been widely used in recent years by structural engineers. However, there are few studies in the literature on the seismic design of such walls. Although there are many studies in the literature on the Direct Displacement-Based Design (DDBD of RC structures, however, no study can be found on DDBD of CRCSWs. Therefore, the aim of present study is to evaluate the ability of DDBD method for designing CRCSWs. In this study, four special composite reinforced concrete shear walls with steel boundary elements of 4, 8, 12 and 16 story numbers were designed using the DDBD method for target drift of 2%. The seismic behavior of the four CRCSWs was studied using nonlinear time-history dynamic analyses. Dynamic analyses were performed for the mentioned walls using 7 selected earthquake records. The seismic design parameters considered in this study includes: lateral displacement profile, inelastic dynamic inter-story drift demand, failure pattern and the composite RC shear walls overstrength factor. For each shear wall, the overall overstrength factor was calculated by dividing the ultimate dynamic base shear demand (Vu by the base shear demand (Vd as per the Direct Displacement Based-Design (DDBD method. The results show that the DDBD method can be used to design CRCSWs safely in seismic regions with predicted behavior.

  14. Prediction of the Fundamental Period of Infilled RC Frame Structures Using Artificial Neural Networks

    Panagiotis G. Asteris

    2016-01-01

    Full Text Available The fundamental period is one of the most critical parameters for the seismic design of structures. There are several literature approaches for its estimation which often conflict with each other, making their use questionable. Furthermore, the majority of these approaches do not take into account the presence of infill walls into the structure despite the fact that infill walls increase the stiffness and mass of structure leading to significant changes in the fundamental period. In the present paper, artificial neural networks (ANNs are used to predict the fundamental period of infilled reinforced concrete (RC structures. For the training and the validation of the ANN, a large data set is used based on a detailed investigation of the parameters that affect the fundamental period of RC structures. The comparison of the predicted values with analytical ones indicates the potential of using ANNs for the prediction of the fundamental period of infilled RC frame structures taking into account the crucial parameters that influence its value.

  15. nRC: non-coding RNA Classifier based on structural features.

    Fiannaca, Antonino; La Rosa, Massimo; La Paglia, Laura; Rizzo, Riccardo; Urso, Alfonso

    2017-01-01

    Non-coding RNA (ncRNA) are small non-coding sequences involved in gene expression regulation of many biological processes and diseases. The recent discovery of a large set of different ncRNAs with biologically relevant roles has opened the way to develop methods able to discriminate between the different ncRNA classes. Moreover, the lack of knowledge about the complete mechanisms in regulative processes, together with the development of high-throughput technologies, has required the help of bioinformatics tools in addressing biologists and clinicians with a deeper comprehension of the functional roles of ncRNAs. In this work, we introduce a new ncRNA classification tool, nRC (non-coding RNA Classifier). Our approach is based on features extraction from the ncRNA secondary structure together with a supervised classification algorithm implementing a deep learning architecture based on convolutional neural networks. We tested our approach for the classification of 13 different ncRNA classes. We obtained classification scores, using the most common statistical measures. In particular, we reach an accuracy and sensitivity score of about 74%. The proposed method outperforms other similar classification methods based on secondary structure features and machine learning algorithms, including the RNAcon tool that, to date, is the reference classifier. nRC tool is freely available as a docker image at https://hub.docker.com/r/tblab/nrc/. The source code of nRC tool is also available at https://github.com/IcarPA-TBlab/nrc.

  16. Assessment of Seismic Vulnerability of Steel and RC Moment Buildings Using HAZUS and Statistical Methodologies

    Iman Mansouri

    2017-01-01

    Full Text Available Designer engineers have always the serious challenge regarding the choice of the kind of structures to use in the areas with significant seismic activities. Development of fragility curve provides an opportunity for designers to select a structure that will have the least fragility. This paper presents an investigation into the seismic vulnerability of both steel and reinforced concrete (RC moment frames using fragility curves obtained by HAZUS and statistical methodologies. Fragility curves are employed for several probability parameters. Fragility curves are used to assess several probability parameters. Furthermore, it examines whether the probability of the exceedence of the damage limit state is reduced as expected. Nonlinear dynamic analyses of five-, eight-, and twelve-story frames are carried out using Perform 3D. The definition of damage states is based on the descriptions provided by HAZUS, which gives the limit states and the associated interstory drift limits for structures. The fragility curves show that the HAZUS procedure reduces probability of damage, and this reduction is higher for RC frames. Generally, the RC frames have higher fragility compared to steel frames.

  17. FRP-RC Beam in Shear: Mechanical Model and Assessment Procedure for Pseudo-Ductile Behavior

    Floriana Petrone

    2014-07-01

    Full Text Available This work deals with the development of a mechanics-based shear model for reinforced concrete (RC elements strengthened in shear with fiber-reinforced polymer (FRP and a design/assessment procedure capable of predicting the failure sequence of resisting elements: the yielding of existing transverse steel ties and the debonding of FRP sheets/strips, while checking the corresponding compressive stress in concrete. The research aims at the definition of an accurate capacity equation, consistent with the requirement of the pseudo-ductile shear behavior of structural elements, that is, transverse steel ties yield before FRP debonding and concrete crushing. For the purpose of validating the proposed model, an extended parametric study and a comparison against experimental results have been conducted: it is proven that the common accepted rule of assuming the shear capacity of RC members strengthened in shear with FRP as the sum of the maximum contribution of both FRP and stirrups can lead to an unsafe overestimation of the shear capacity. This issue has been pointed out by some authors, when comparing experimental shear capacity values with the theoretical ones, but without giving a convincing explanation of that. In this sense, the proposed model represents also a valid instrument to better understand the mechanical behavior of FRP-RC beams in shear and to calculate their actual shear capacity.

  18. Flexural Strengthening of RC Slabs Using a Hybrid FRP-UHPC System Including Shear Connector

    Jiho Moon

    2017-01-01

    Full Text Available A polymeric hybrid composite system made of UHPC and CFRP was proposed as a retrofit system to enhance flexural strength and ductility of RC slabs. While the effectiveness of the proposed system was confirmed previously through testing three full-scale one-way slabs having two continuous spans, the slabs retrofitted with the hybrid system failed in shear. This sudden shear failure would stem from the excessive enhancement of the flexural strength over the shear strength. In this study, shear connectors were installed between the hybrid system and a RC slab. Using simple beam, only positive moment section was examined. Two full-scale RC slabs were cast and tested to failure: the first as a control and the second using this new strengthening technique. The proposed strengthening system increased the ultimate load carrying capacity of the slab by 70%, the stiffness by 60%, and toughness by 128%. The efficiency of shear connectors on ductile behavior of the retrofitted slab was also confirmed. After the UHPC top is separated from the slab, the shear connector transfer shear load and the slab system were in force equilibrium by compression in UHPC and tension in CFRP.

  19. Investigation of the fittest shear transfer model used to FEM analysis of RC structures

    Endo, Tatumi; Aoyagi, Masao; Endo, Takao

    1988-01-01

    In order to rationalize the design method of reinforced concrete (RC) structures in the nuclear power plant, the structural analysis, which is able to simulate the seismic behavior of RC structures, should be established. In this report, the investigation of shear transfer model at shear plane to be applied to FEM analysis is performed. Main conclusions obtained within the limit of the study are as follows. 1. Development of the shear transfer model at shear plane. 1) Two shear transfer models are developed to be used to the 2-dimensional nonlinear FEM analysis. 2) In one model suggested, reinforcements are modeled by plate elements and the nonlinearity of concrete surrounding reinforcement but the properties of bond-slip relation between concrete and reinforcements is also considered. 3) In another model, reinforcements are modeled by equivalent concrete properties, in which axial regidity and dowel effects of reinforcements are considered. 2. Verification of the suggested model. 1) It is confirmed that the computational results using the above-mentioned model could simulate the experimental ones fairly well. 2) Considering the application to the analysis of RC structures in the design, the model, in which reinforcement are modeled by equivalent concrete properties, is useful in view point of accuracy and simplicity. (author)

  20. Interfacial stresses in damaged RC beams strengthened with externally bonded CFRP plate

    Benrahou, K.H.; Adda bedia, E.A.; Benyoucef, S.; Tounsi, A.; Benguediab, M.

    2006-01-01

    A theoretical method to predict the interfacial stresses in the adhesive layer of damaged reinforced concrete beams strengthened with externally bonded carbon fiber-reinforced polymer (CFRP) plate is presented. The adopted model is developed including the adherend shear deformations by assuming a linear shear stress through the depth of the RC beam [A. Tounsi, Int. J. Solids Struct., in press], while all existing solutions neglect this effect [e.g. S. Benyoucef, A. Tounsi, S.A. Meftah, E.A. Adda Bedia, Compos. Interfaces, in press; S.T. Smith, J.G. Teng, Eng. Struct. 23 (7) (2001) 857-871; T.M. Roberts, Struct. Eng. 67 (12) (1989) 229-233; A. Tounsi, S. Benyoucef, Int. J. Adhes. Adhes., in press; T. Stratford, J. Cadei, Construct. Building Mater. 20 (2006) 34-35]. In addition, in the present study the anisotropic damage model is adopted to describe the damage of the RC beams. It is shown that the damage has a significant effect on the interfacial stresses in FRP-damaged RC beam

  1. Pros and cons of multistory RC tunnel-form (box-type) buildings

    Kalkan, E.; Yuksel, S.B.

    2008-01-01

    Tunnel-form structural systems (i.e., box systems), having a load-carrying mechanism composed of reinforced concrete (RC) shear walls and slabs only, have been prevailingly utilized in the construction of multistory residential units. The superiority of tunnel-form buildings over their conventional counterparts stems from the enhanced earthquake resistance they provide, and the considerable speed and economy of their construction. During recent earthquakes in Turkey, they exhibited better seismic performance in contrast to the damaged condition of a number of RC frames and dual systems (i.e., RC frames with shear wall configurations). Thus the tunnel-form system has become a primary construction technique in many seismically active regions. In this paper, the strengths and weaknesses of tunnel-form buildings are addressed in terms of design considerations and construction applications. The impacts of shear wall reinforcement ratio and its detailing on system ductility, loadcarrying capacity and failure mechanism under seismic forces are evaluated at section and global system levels. Influences of tension/compression coupling and wall openings on the response are also discussed. Three-dimensional nonlinear finite element models, verified through comparisons with experimental results, were used for numerical assessments. Findings from this projection provide useful information on adequate vertical reinforcement ratio and boundary reinforcement to achieve enhanced performance of tunnel-form buildings under seismic actions. Copyright ?? 2007 John Wiley & Sons, Ltd.

  2. Summary of LaRC 2-inch Erectable Joint Hardware Heritage Test Data

    Dorsey, John T.; Watson, Judith J.

    2016-01-01

    As the National Space Transportation System (STS, also known as the Space Shuttle) went into service during the early 1980's, NASA envisioned many missions of exploration and discovery that could take advantage of the STS capabilities. These missions included: large orbiting space stations, large space science telescopes and large spacecraft for manned missions to the Moon and Mars. The missions required structures that were significantly larger than the payload volume available on the STS. NASA Langley Research Center (LaRC) conducted studies to design and develop the technology needed to assemble the large space structures in orbit. LaRC focused on technology for erectable truss structures, in particular, the joint that connects the truss struts at the truss nodes. When the NASA research in large erectable space structures ended in the early 1990's, a significant amount of structural testing had been performed on the LaRC 2-inch erectable joint that was never published. An extensive set of historical information and data has been reviewed and the joint structural testing results from this historical data are compiled and summarized in this report.

  3. Digital Audiobooks

    Have, Iben; Pedersen, Birgitte Stougaard

    Audiobooks are rapidly gaining popularity with widely accessible digital downloading and streaming services. The paper is framing how the digital audiobook expands and changes the target groups for book publications and how it as an everyday activity is creating new reading experiences, places...

  4. Digital TMI

    Rios, Joseph

    2012-01-01

    Presenting the current status of the Digital TMI project to visiting members of the FAA Command Center. Digital TMI is an effort to store national-level traffic management initiatives in a standards-compliant manner. Work is funded by the FAA.

  5. Digital signal processing for a thermal neutron detector using ZnS(Ag):{sup 6}LiF scintillating layers read out with WLS fibers and SiPMs

    Mosset, J.-B., E-mail: jean-baptiste.mosset@psi.ch; Stoykov, A.; Greuter, U.; Hildebrandt, M.; Schlumpf, N.

    2016-07-11

    We present a digital signal processing system based on a photon counting approach which we developed for a thermal neutron detector consisting of ZnS(Ag):{sup 6}LiF scintillating layers read out with WLS fibers and SiPMs. Three digital filters have been evaluated: a moving sum, a moving sum after differentiation and a digital CR-RC{sup 4} filter. The performances of the detector with these filters are presented. A full analog signal processing using a CR-RC{sup 4} filter has been emulated digitally. The detector performance obtained with this analog approach is compared with the one obtained with the best performing digital approach. - Highlights: • Application of digital signal processing for a SiPM-based ZnS:6LiF neutron detector. • Optimisation of detector performances with 3 different digital filters. • Comparison with detector performances with a full analog signal processing.

  6. Digital displacements

    Pors, Anja Svejgaard

    2014-01-01

    In recent years digital reforms are being introduced in the municipal landscape of Denmark. The reforms address the interaction between citizen and local authority. The aim is, that by 2015 at least 80 per cent of all correspondence between citizens and public authority will be transmitted through...... digital interface. However, the transformation of citizen services from traditional face-to-face interaction to digital self-service gives rise to new practices; some citizens need support to be able to manage self-service through digital tools. A mixture of support and teaching, named co......-service, is a new task in public administration, where street level bureaucrats assist citizens in using the new digital solutions. The paper is based on a case study conducted primarily in a citizen service centre in Copenhagen, Denmark. Based on ethnography the paper gives an empirical account of the ongoing...

  7. Digitized mammograms

    Bruneton, J.N.; Balu-Maestro, C.; Rogopoulos, A.; Chauvel, C.; Geoffray, A.

    1988-01-01

    Two observers conducted a blind evaluation of 100 mammography files, including 47 malignant cases. Films were read both before and after image digitization at 50 μm and 100 μm with the FilmDRSII. Digitization permitted better analysis of the normal anatomic structures and moderately improved diagnostic sensitivity. Searches for microcalcifications before and after digitization at 100 μm and 50 μm showed better analysis of anatomic structures after digitization (especially for solitary microcalcifications). The diagnostic benefit, with discovery of clustered microcalcifications, was more limited (one case at 100 μm, nine cases at 50 μm). Recognition of microcalcifications was clearly improved in dense breasts, which can benefit from reinterpretation after digitization at 50 μm rather 100μm

  8. Retrieval of ion distributions in RC from TWINS ENA images by CT technique

    Ma, S.; Yan, W.; Xu, L.; Goldstein, J.; McComas, D. J.

    2010-12-01

    The Two Wide-angle Imaging Neutral-atom Spectrometers (TWINS) mission is the first constellation to employ imagers on two separate spacecraft to measure energetic neutral atoms (ENA) produced by charge exchange between ring current energetic ions and cold exospheric neutral atoms. By applying the 3-D volumetric pixel (voxel) computed tomography (CT) inversion method to TWINS images, parent ion populations in the ring current (RC) and auroral regions are retrieved from their ENA signals. This methodology is implemented for data obtained during the main phase of a moderate geomagnetic storm on 11 October 2008. For this storm the two TWINS satellites were located in nearly the same meridian plane at vantage points widely separated in magnetic local time, and both more than 5 RE geocentric distance from the Earth. In the retrieval process, the energetic ion fluxes to be retrieved are assumed being isotropic with respect to pitch angle. The ENA data used in this study are differential fluxes averaged over 12 sweeps (corresponding to an interval of 16 min.) at different energy levels ranging throughout the full 1--100 keV energy range of TWINS. The ENA signals have two main components: (1) a low-latitude/ high-altitude signal from trapped RC ions and (2) a low-altitude signal from precipitating ions in the auroral/subauroral ionosphere. In the retrieved ion distributions, the main part of the RC component is located around midnight toward dawn sector with L from 3 to 7 or farther, while the subauroral low-altitude component is mainly at pre-midnight. It seems that the dominant energy of the RC ions for this storm is at the lowest energy level of 1-2 keV, with another important energy band centered about 44 keV. The low-altitude component is consistent with in situ observations by DMSP/SSJ4. The result of this study demonstrates that with satellite constellations such as TWINS, using all-sky ENA imagers deployed at multiple vantage points, 3-D distribution of RC ion

  9. Assessment of soil properties by organic matter and EM-microorganism incorporation

    Valarini P. J.

    2003-01-01

    Full Text Available Properties of a claim loam soil, collected in Aranjuez (Madrid and enriched with organic matter and microorganisms, were evaluated under controlled temperature and moisture conditions, over a period of three months. The following treatments were carried out: soil (control; soil + 50 t ha-1 of animal manure (E50; soil + 50 t ha-1 of animal manure + 30 L ha-1 of effective microorganisms (E50EM; soil + 30 t ha-1 of the combination of various green crop residues and weeds (RC30 and soil + 30 t ha-1 of the combination of various green crop residues and weeds + 30 L ha-1 of effective microorganisms (RC30EM. Soil samples were taken before and after incubation and their physical, chemical, and microbiological parameters analyzed. Significant increase was observed in the production of exopolysaccharides and basic phosphatase and esterase enzyme activities in the treatments E50EM and RC30EM, in correlation with the humification of organic matter, water retention at field capacity, and the cationic exchange capacity (CEC of the same treatments. The conclusion was drawn that the incorporation of a mixture of effective microorganisms (EM intensified the biological soil activity and improved physical and chemical soil properties, contributing to a quick humification of fresh organic matter. These findings were illustrated by the microbiological activities of exopolysaccharides and by alkaline phosphatase and esterase enzymes, which can be used as early and integrated soil health indicators.

  10. CD45RC isoform expression identifies functionally distinct T cell subsets differentially distributed between healthy individuals and AAV patients.

    Laurence Ordonez

    Full Text Available In animal models of anti-neutrophil cytoplasmic antibody (ANCA-associated vasculitis (AAV, the proportion of CD45RC T cell subsets is important for disease susceptibility. Their human counterparts are, however, functionally ill defined. In this report, we studied their distribution in healthy controls (HC, AAV patients and in Systemic lupus erythematous (SLE patients as disease controls. We showed that CD45RC expression level on human CD4 and CD8 T cells identifies subsets that are highly variable among individuals. Interestingly, AAV patients exhibit an increased proportion of CD45RC(low CD4 T cells as compared to HC and SLE patients. This increase is stable over time and independent of AAV subtype, ANCA specificity, disease duration, or number of relapses. We also analyzed the cytokine profile of purified CD4 and CD8 CD45RC T cell subsets from HC, after stimulation with anti-CD3 and anti-CD28 mAbs. The CD45RC subsets exhibit different cytokine profiles. Type-1 cytokines (IL-2, IFN-gamma and TNF-alpha were produced by all CD45RC T cell subsets, while the production of IL-17, type-2 (IL-4, IL-5 and regulatory (IL-10 cytokines was restricted to the CD45RC(low subset. In conclusion, we have shown that CD45RC expression divides human T cells in functionally distinct subsets that are imbalanced in AAV. Since this imbalance is stable over time and independent of several disease parameters, we hypothesize that this is a pre-existing immune abnormality involved in the etiology of AAV.

  11. Digital Ethics/Going Digital.

    Wilson, Bradley

    1996-01-01

    Finds that the recent National Press Photographers Association code of ethics can serve as a model for any photography staff. Discusses how digital imaging is becoming commonplace in classrooms, due to decreasing costs and easier software. Explains digital terminology. Concludes that time saved in the darkroom and at the printer is now spent on…

  12. Loss Characteristics of 6.5 kV RC-IGBT Applied to a Traction Converter

    Xianjin Huang

    2017-07-01

    Full Text Available 6.5 kV level IGBT (Insulated Gate Bipolar Transistor modules are widely applied in megawatt locomotive (MCUs traction converters, to achieve an upper 3.5 kV DC link, which is beneficial for decreasing power losses and increasing the power density. Reverse Conducting IGBT (RC-IGBT constructs the conventional IGBT function and freewheel diode function in a single chip, which has a greater flow ability in the same package volume. In the same cooling conditions, RC-IGBT allows for a higher operating temperature. In this paper, a mathematic model is developed, referring to the datasheets and measurement data, to study the 6.5 kV/1000 A RC-IGBT switching features. The relationship among the gate desaturated pulse, conducting losses, and recovery losses is discussed. Simulations and tests were carried out to consider the influence of total losses on the different amplitudes and durations of the desaturated pulse. The RC-IGBT traction converter system with gate pulse desaturated control is built, and the simulation and measurements show that the total losses of RC-IGBT with desaturated control decreased comparing to the RC-IGBT without desaturated control or conventional IGBT. Finally, a proportional small power platform is developed, and the test results prove the correction of the theory analysis.

  13. A sum-over-paths algorithm for third-order impulse-response moment extraction within RC IC-interconnect networks

    Wojcik, E. A.; Ni, D.; Lam, T. M.; Le Coz, Y. L.

    2015-07-01

    We have created the first stochastic SoP (Sum-over-Paths) algorithm to extract third-order impulse-response (IR) moment within RC IC interconnects. It employs a newly discovered Feynman SoP Postulate. Importantly, our algorithm maintains computational efficiency and full parallelism. Our approach begins with generation of s-domain nodal-voltage equations. We then perform a Taylor-series expansion of the circuit transfer function. These expansions yield transition diagrams involving mathematical coupling constants, or weight factors, in integral powers of complex frequency s. Our SoP Postulate enables stochastic evaluation of path sums within the circuit transition diagram to order s3-corresponding to the order of IR moment (m3) we seek here. We furnish, for the first time, an informal algebraic proof independently validating our SoP Postulate and algorithm. We list, as well, detailed procedural steps, suitable for coding, that define an efficient stochastic algorithm for m3 IR extraction. Origins of the algorithm's statistical "capacitor-number cubed" correction and "double-counting" weight factors are explained, for completeness. Our algorithm was coded and successfully tested against exact analytical solutions for 3-, 5-, and 10-stage RC lines. We achieved better than 0.65% 1-σ error convergence, after only 10K statistical samples, in less than 1 s of 2-GHz Pentium® execution time. These results continue to suggest that stochastic SoP algorithms may find useful application in circuit analysis of massively coupled networks, such as those encountered in high-end digital IC-interconnect CAD.

  14. Digital radiography

    Coulomb, M.; Dal Soglio, S.; Pittet-Barbier, L.; Ranchoup, Y.; Thony, F.; Ferretti, G.; Robert, F.

    1992-01-01

    Digital projection radiography may replace conventional radiography some day, provided it can meet several requirements: equal or better diagnostic effectiveness of the screen-film systems; reasonable image cost; real improvement in the productivity of the Departments of Imaging. All digital radiographic systems include an X-ray source, an image acquisition and formatting sub-system, a display and manipulation sub-system, and archiving subsystem and a laser editing system, preferably shared by other sources of digital images. Three digitization processes are available: digitization of the radiographic film, digital fluorography and phospholuminescent detectors with memory. The advantages of digital fluoroscopy are appealing: real-time image acquisition, suppression of cassettes; but its disadvantages are far from negligible: it cannot be applied to bedside radiography, the field of examination is limited, and the wide-field spatial resolution is poor. Phospholuminescent detectors with memory have great advantages: they can be used for bedside radiographs and on all the common radiographic systems; spatial resolution is satisfactory; its current disadvantages are considerable. These two systems, have common properties making up the entire philosophy of digital radiology and specific features that must guide our choice according to the application. Digital fluorography is best applied in pediatric radiology. However, evaluation works have showed that it was applicable with sufficient quality to many indications of general radiology in which a fluoroscopic control and fast acquisition of the images are essential; the time gained on the examination may be considerable, as well as the savings on film. Detectors with memory are required for bedside radiographs, in osteoarticular and thoracic radiology, in all cases of traumatic emergency and in the resuscitation and intensive care departments

  15. Study of time-domain digital pulse shaping algorithms for nuclear signals

    Zhou Jianbin; Tuo Xianguo; Zhu Xing; Liu Yi; Zhou Wei; Lei Jiarong

    2012-01-01

    With the development on high-speed integrated circuit, fast high resolution sampling ADC and digital signal processors are replacing analog shaping amplifier circuit. This paper firstly presents the numerical analysis and simulation on R-C shaping circuit model and C-R shaping circuit model. Mathematic models are established based on 1 st order digital differential method and Kirchhoff Current Law in time domain, and a simulation and error evaluation experiment on an ideal digital signal are carried out with Excel VBA. A digital shaping test for a semiconductor X-ray detector in real time is also presented. Then a numerical analysis for Sallen-Key(S-K) low-pass filter circuit model is implemented based on the analysis of digital R-C and digital C-R shaping methods. By applying the 2 nd order non-homogeneous differential equation,the authors implement a digital Gaussian filter model for a standard exponential-decaying signal and a nuclear pulse signal. Finally, computer simulations and experimental tests are carried out and the results show the possibility of the digital pulse processing algorithms. (authors)

  16. Becoming digital

    Pors, Anja Svejgaard

    2015-01-01

    . An ethnographic account of how digital reforms are implemented in practice shows how street-level bureaucrat’s classic tasks such as specialized casework are being reconfigured into educational tasks that promote the idea of “becoming digital”. In the paper, the author argues that the work of “becoming digital....... Originality/value: The study contributes to ethnographic research in public administration by combining two separate subfields, e-government and street-level bureaucracy, to discern recent transformations in public service delivery. In the digital era, tasks, control and equality are distributed in ways...

  17. Digital Humanities

    Brügger, Niels

    2016-01-01

    , and preserving material to study, as an object of study in its own right, as an analytical tool, or for collaborating, and for disseminating results. The term "digital humanities" was coined around 2001, and gained currency within academia in the following years. However, computers had been used within......Digital humanities is an umbrella term for theories, methodologies, and practices related to humanities scholarship that use the digital computer as an integrated and essential part of its research and teaching activities. The computer can be used for establishing, finding, collecting...

  18. Digital Snaps

    Sandbye, Mette; Larsen, Jonas

    . Distance as the New Punctum / Mikko Villi -- pt. II. FAMILY ALBUMS IN TRANSITION -- ch. 4. How Digital Technologies Do Family Snaps, Only Better / Gillian Rose -- ch. 5. Friendship Photography: Memory, Mobility and Social Networking / Joanne Garde-Hansen -- ch. 6. Play, Process and Materiality in Japanese...... -- ch. 9. Retouch Yourself: The Pleasures and Politics of Digital Cosmetic Surgery / Tanya Sheehan -- ch. 10. Virtual Selves: Art and Digital Autobiography / Louise Wolthers -- ch. 11. Mobile-Media Photography: New Modes of Engagement / Michael Shanks and Connie Svabo....

  19. Digital electronics

    Morris, John

    2013-01-01

    An essential companion to John C Morris's 'Analogue Electronics', this clear and accessible text is designed for electronics students, teachers and enthusiasts who already have a basic understanding of electronics, and who wish to develop their knowledge of digital techniques and applications. Employing a discovery-based approach, the author covers fundamental theory before going on to develop an appreciation of logic networks, integrated circuit applications and analogue-digital conversion. A section on digital fault finding and useful ic data sheets completes th

  20. Digital Leadership

    Zupancic, Tadeja; Verbeke, Johan; Achten, Henri

    2016-01-01

    Leadership is an important quality in organisations. Leadership is needed to introduce change and innovation. In our opinion, in architectural and design practices, the role of leadership has not yet been sufficiently studied, especially when it comes to the role of digital tools and media....... With this paper we intend to initiate a discussion in the eCAADe community to reflect and develop ideas in order to develop digital leadership skills amongst the membership. This paper introduces some important aspects, which may be valuable to look into when developing digital leadership skills....

  1. Digital radiography

    Zani, M.L.

    2002-01-01

    X-ray radiography is a very common technique used to check the homogeneity of a material or the inside of a mechanical part. Generally the radiation that goes through the material to check, produced an image on a sensitized film. This method requires time because the film needs to be developed, digital radiography has no longer this inconvenient. In digital radiography the film is replaced by digital data and can be processed as any computer file. This new technique is promising but its main inconvenient is that today its resolution is not so good as that of film radiography. (A.C.)

  2. Digital radiography

    Kusano, Shoichi

    1993-01-01

    Firstly, from an historic point of view, fundamental concepts on digital imaging were reviewed to provide a foundation for discussion of digital radiography. Secondly, this review summarized the results of ongoing research in computed radiography that replaces the conventional film-screen system with a photo-stimulable phosphor plate; and thirdly, image quality, radiation protection, and image processing techniques were discussed with emphasis on picture archiving and communication system environment as our final goal. Finally, future expansion of digital radiography was described based on the present utilization of computed tomography at the National Defense Medical College Hospital. (author) 60 refs

  3. Correlação da aferição manual e digital da distância interespinhosa pelo método de newmann em fraturas toracolombares do tipo explosão Correlación entre calibrado manual y digital de la distancia interespinhosa por el método de neumann en fracturas toracolombares tipo explosión Correlation between manual and digital measurement of inter-spinous dis tance by neumann method in burst thoracolumbar fracture

    João Paulo Machado Bergamaschi

    2011-01-01

    Full Text Available OBJETIVO: Analisar a correlação entre a aferição manual e digital da distância interespinhosa pelo método de Neumann em fraturas toracolombares do tipo explosão, bem como a reprodutibilidade das duas técnicas. MÉTODOS: Foram avaliadas 212 radiografias de pacientes com fratura toracolombar do tipo explosão, sendo 160 do sexo masculino e 52 do sexo feminino. A idade média dos pacientes no tempo da fratura foi de 38,9 anos (variando de 12 a 76 anos. RESULTADOS: O coeficiente de Pearson, quando comparados os valores percentuais manuais e digitais da relação da distância interespinhosa do nível da vértebra fraturada e dos níveis adjacentes, foi de 0,95 (pOBJETIVO: El objetivo de este estudio es analizar la correlación entre calibrado manual y digital de la distancia interespinhosa por el método de Neumann en fracturas toracolombares tipo explosión, así como la reproducibilidad de los dos técnicas. MÉTODOS: Radiografías fueron evaluados 212 pacientes con fractura toracolombar tipo explosión, 160 hombres y 52 mujeres. La edad promedio de los pacientes en el momento de fractura fue 38.9 años (que van desde 12 a 76 años. RESULTADOS: El coeficiente de Pearson, cuando se comparan valores porcentuales digital y manuales de la relación de distancia interespinhosa el nivel de la vértebra fraturada y niveles adyacentes, fue 0.95 (pOBJECTIVE: The aim of this study is to analyze the correlation between the manual and digital inter-spinous distance by the Neumann method in burst thoracolumbar fracture, as well as the reproducibility of these two techniques. METHODS: We evaluated 212 x-rays of patients with burst thoracolumbar fracture. There were 60 male and 52 female. The average age at the time of the fracture was 38,9 years (12 - 76 years. RESULTS: The Pearson' coefficient between manual and digital analyses was 0,95 (p<0,01. The agreement coefficient of manual and digital measurements was 0,97 and 0,93, respectively. CONCLUSION

  4. Digital fabrication

    2012-01-01

    The Winter 2012 (vol. 14 no. 3) issue of the Nexus Network Journal features seven original papers dedicated to the theme “Digital Fabrication”. Digital fabrication is changing architecture in fundamental ways in every phase, from concept to artifact. Projects growing out of research in digital fabrication are dependent on software that is entirely surface-oriented in its underlying mathematics. Decisions made during design, prototyping, fabrication and assembly rely on codes, scripts, parameters, operating systems and software, creating the need for teams with multidisciplinary expertise and different skills, from IT to architecture, design, material engineering, and mathematics, among others The papers grew out of a Lisbon symposium hosted by the ISCTE-Instituto Universitario de Lisboa entitled “Digital Fabrication – A State of the Art”. The issue is completed with four other research papers which address different mathematical instruments applied to architecture, including geometric tracing system...

  5. Digital Relationships

    Ledborg Hansen, Richard

    -­rich information and highly interesting communication are sky-­high and rising. With a continuous increase in digitized communication follows a decrease in face-­to-­face encounters and our ability to engage in inter-­personal relationships are suffering for it (Davis, 2013). The behavior described in this paper......-­‐Jones, 2011) for increases in effectiveness and efficiency we indiscriminately embrace digital communication and digitized information dissemination with enthusiasm – at the risk of ignoring the potentially dark side of technology. However, technology also holds a promise for better understanding precisely...... for the same reasons – that the growing amount of digitized communication “out there” represents data waiting to be sifted, analyzed and decoded. In this paper “Facebook behavior” refers to a particular behavior characterized by presenting your self and representations of selected self in the hope of getting...

  6. Digital Discretion

    Busch, Peter Andre; Zinner Henriksen, Helle

    2018-01-01

    discretion is suggested to reduce this footprint by influencing or replacing their discretionary practices using ICT. What is less researched is whether digital discretion can cause changes in public policy outcomes, and under what conditions such changes can occur. Using the concept of public service values......This study reviews 44 peer-reviewed articles on digital discretion published in the period from 1998 to January 2017. Street-level bureaucrats have traditionally had a wide ability to exercise discretion stirring debate since they can add their personal footprint on public policies. Digital......, we suggest that digital discretion can strengthen ethical and democratic values but weaken professional and relational values. Furthermore, we conclude that contextual factors such as considerations made by policy makers on the macro-level and the degree of professionalization of street...

  7. The calcium-dependent protein kinase RcCDPK2 phosphorylates sucrose synthase at Ser11 in developing castor oil seeds.

    Fedosejevs, Eric T; Gerdis, Suzanne A; Ying, Sheng; Pyc, Michal; Anderson, Erin M; Snedden, Wayne A; Mullen, Robert T; She, Yi-Min; Plaxton, William C

    2016-10-15

    Imported sucrose is cleaved by sucrose synthase (SUS) as a critical initial reaction in the biosynthesis of storage end-products by developing seeds. Although SUS is phosphorylated at a conserved seryl residue by an apparent CDPK (Ca 2+ -dependent protein kinase) in diverse plant tissues, the functions and mechanistic details of this process remain obscure. Thus, the native CDPK that phosphorylates RcSUS1 (Ricinus communis SUS1) at Ser 11 in developing COS (castor oil seeds) was highly purified and identified as RcCDPK2 by MS/MS. Purified RcSUS1-K (-kinase) and heterologously expressed RcCDPK2 catalyzed Ca 2+ -dependent Ser 11 phosphorylation of RcSUS1 and its corresponding dephosphopeptide, while exhibiting a high affinity for free Ca 2+ ions [K 0.5 (Ca 2+ ) < 0.4 µM]. RcSUS1-K activity, RcCDPK2 expression, and RcSUS1 Ser 11 phosphorylation peaked during early COS development and then declined in parallel. The elimination of sucrose import via fruit excision triggered RcSUS1 dephosphorylation but did not alter RcSUS1-K activity, suggesting a link between sucrose signaling and posttranslational RcCDPK2 control. Both RcCDPK2-mCherry and RcSUS1-EYFP co-localized throughout the cytosol when transiently co-expressed in tobacco suspension cells, although RcCDPK2-mCherry was also partially localized to the nucleus. Subcellular fractionation revealed that ∼20% of RcSUS1-K activity associates with microsomal membranes in developing COS, as does RcSUS1. In contrast with RcCDPK1, which catalyzes inhibitory phosphorylation of COS bacterial-type phosphoenolpyruvate carboxylase at Ser 451 , RcCDPK2 exhibited broad substrate specificity, a wide pH-activity profile centered at pH 8.5, and insensitivity to metabolite effectors or thiol redox status. Our combined results indicate a possible link between cytosolic Ca 2+ -signaling and the control of photosynthate partitioning during COS development. © 2016 The Author(s); published by Portland Press Limited on behalf of the

  8. RC-3095, a Selective Gastrin-Releasing Peptide Receptor Antagonist, Does Not Protect the Lungs in an Experimental Model of Lung Ischemia-Reperfusion Injury

    Vera L. Oliveira-Freitas

    2015-01-01

    Full Text Available RC-3095, a selective GRPR antagonist, has been shown to have anti-inflammatory properties in different models of inflammation. However, its protective effect on lungs submitted to lung ischemia-reperfusion injury has not been addressed before. Then, we administrated RC-3095 intravenously before and after lung reperfusion using an animal model of lung ischemia-reperfusion injury (LIRI by clamping the pulmonary hilum. Twenty Wistar rats were subjected to an experimental model in four groups: SHAM, ischemia-reperfusion (IR, RC-Pre, and RC-Post. The final mean arterial pressure significantly decreased in IR and RC-Pre compared to their values before reperfusion (P<0.001. The RC-Post group showed significant decrease of partial pressure of arterial oxygen at the end of the observation when compared to baseline (P=0.005. Caspase-9 activity was significantly higher in the RC-Post as compared to the other groups (P<0.013. No significant differences were observed in eNOS activity among the groups. The groups RC-Pre and RC-Post did not show any significant decrease in IL-1β (P=0.159 and TNF-α (P=0.260, as compared to IR. The histological score showed no significant differences among the groups. In conclusion, RC-3095 does not demonstrate a protective effect in our LIRI model. Additionally, its use after reperfusion seems to potentiate cell damage, stimulating apoptosis.

  9. Design issues and cost implications of RTO/RC-ITER divertor

    Ibbott, C.; Antipenkov, A.; Chiocchio, S.; Federici, G.; Heidl, H.; Janeschitz, G.; Martin, E.; Tivey, R.

    2000-01-01

    This paper reports on the conceptual divertor design developed for the reduced technical objectives/reduced cost-international thermonuclear experimental reactor (RTO/RC-ITER). The cost drivers are discussed and a number of cost-reducing measures identified. Scaled costs, based on industrial estimates of the 1998 ITER design (Technical Basis for the ITER Final Design Report, Cost Review and Safety Analysis (FDR). ITER EDA Documentation Series No. 16. IAEA, Vienna, 1998), give for the RTO/RC-ITER ∼60% of the FDR costs. Plasma facing components (PFCs) account for 75% of the total divertor costs. Hence, PFC design simplifications are outlined in the paper showing the possibility of achieving a cost reduction of 50%. The design proposals, outlined in the paper, focus on minimising the number of sub-components and simplifying the manufacturing cycle. These changes contribute to improved reliability based on a more robust coolant design layout. The reduced space allocated to the divertor (G. Janeschitz, A. Antipenkov, V. Barabash, S. Chiocchio, G. Federici, C. Ibbott, E. Martin, R. Tivey, Overview of the Divertor Design and its Integration into RTO/RC-ITER, this conference) requires changes to the design that minimise the cassette body thickness, relocate the cassette attachments and revise the remote handling philosophy. Results of supporting electro-magnetic, neutron shielding, thermo-hydraulic and pumping conductance analyses are reported, qualifying the cassette design. A reduction in the coolant inlet temperature to 100-120 deg. C is discussed in terms of thermal-hydraulic performance and fatigue life of the heat sink. Finally, an R and D plan sets out the work needed: (1) to develop the cost saving measures of the new design; and (2) to demonstrate the reliability of the chosen technologies

  10. ALGORITMA RC4 DALAM PROTEKSI TRANSMISI DAN HASIL QUERY UNTUK ORDBMS POSTGRESQL

    Yuri Ariyanto

    2009-01-01

    Full Text Available In this research will be worked through about how cryptography RC4's algorithm implementation in protection to query result and of query, security by encryption and descryption up to both is in network. Implementation of this research which is build software in client that function access databases that is placed by the side of server. Software that building to have facility for encryption and descryption query result and of query that is sent from client goes to server and. transmission query result and of query can secure its security. Well guaranted transmission security him of query result and of query can be told to succeed if success software can encryption query result and of query which transmission so that in the event of scanning to both, scanning will not understand data content. Conclusion of this research that is woke up software succeed encryption query and result of query which transmission between application of client and of server databases. Abstract in Bahasa Indonesia: Pada penelitian ini dibahas mengenai bagaimana mengimplementasikan algoritma kriptografi RC4 dalam proteksi terhadap query dan hasil query, pengamanan dilakukan dengan cara melakukan enkripsi dan dekripsi selama keduanya berada di dalam jaringan. Pengimplementasian dari penelitian ini yaitu membangun sebuah software yang akan diletakkan di sisi client yang berfungsi mengakses database yang diletakkan di sisi server. Software yang dibangun memiliki fasilitas untuk mengenkripsi dan mendektipsi query dan hasil query yang dikirimkan dari client ke server dan juga sebaliknya. Dengan demikian tramsmisi query dan hasil query dapat terjamin keamanannya.Terjaminnya keamanan transmisi query dan hasil query dapat dikatakan berhasil jika software berhasil mengenkripsi query dan hasil query yang ditransmisikan sehingga apabila terjadi penyadapan terhadap keduanya, penyadap tidak akan mengerti isi data tersebut. Kesimpulan dari penelitian ini yaitu software yang dibangun

  11. Effect of web openings on the structural behavior of RC beams subjected to pure torsion

    Abdo Taha

    2017-01-01

    Full Text Available In the construction of modern buildings, the presence of openings became a necessity nowadays in order to accommodate the many pipes and ducts required for the different services. On the other hand, the presence of these openings in RC beams affects their structural behavior. One important behavior that needs further study would be torsion. Currently, there are no guide lines available to analyze or design RC beams with web openings under pure torsion. Thus, the main objective of this research is to investigate the behavior of simply supported RC beams with openings subjected to pure torsion. In the first part of this paper, an experimental study is conducted on seven beams subjected to pure torsion loading in order to investigate the effect of the number of openings, the spacing between stirrups, and beam depth. All beams have a constant clear span length of 1800 mm and a constant beam width of 150 mm. The beams have varying opening number and stirrups arrangement as well as varying beam depth in order to investigate the effect of these parameters on the behavior of the beams. Systematic measurements such as the cracking torque, the ultimate torque, the angle of rotation of the beam at cracking, and the angle of rotation of the beam at the ultimate load are conducted for further understanding of the beam behavior under torsion. In the second part of the paper, the experimental results are compared with the numerical results obtained using the non-linear finite element analysis program, ANSYS. Good agreement between the experimental and numerical results is found.

  12. Biochemical and Molecular Characterization of RcSUS1, a Cytosolic Sucrose Synthase Phosphorylated in Vivo at Serine 11 in Developing Castor Oil Seeds*

    Fedosejevs, Eric T.; Ying, Sheng; Park, Joonho; Anderson, Erin M.; Mullen, Robert T.; She, Yi-Min; Plaxton, William C.

    2014-01-01

    Sucrose synthase (SUS) catalyzes the UDP-dependent cleavage of sucrose into UDP-glucose and fructose and has become an important target for improving seed crops via metabolic engineering. A UDP-specific SUS homotetramer composed of 93-kDa subunits was purified to homogeneity from the triacylglyceride-rich endosperm of developing castor oil seeds (COS) and identified as RcSUS1 by mass spectrometry. RcSUS1 transcripts peaked during early development, whereas levels of SUS activity and immunoreactive 93-kDa SUS polypeptides maximized during mid-development, becoming undetectable in fully mature COS. The cytosolic location of the enzyme was established following transient expression of RcSUS1-enhanced YFP in tobacco suspension cells and fluorescence microscopy. Immunological studies using anti-phosphosite-specific antibodies revealed dynamic and high stoichiometric in vivo phosphorylation of RcSUS1 at its conserved Ser-11 residue during COS development. Incorporation of 32Pi from [γ-32P]ATP into a RcSUS1 peptide substrate, alongside a phosphosite-specific ELISA assay, established the presence of calcium-dependent RcSUS1 (Ser-11) kinase activity. Approximately 10% of RcSUS1 was associated with COS microsomal membranes and was hypophosphorylated relative to the remainder of RcSUS1 that partitioned into the soluble, cytosolic fraction. Elimination of sucrose supply caused by excision of intact pods of developing COS abolished RcSUS1 transcription while triggering the progressive dephosphorylation of RcSUS1 in planta. This did not influence the proportion of RcSUS1 associated with microsomal membranes but instead correlated with a subsequent marked decline in SUS activity and immunoreactive RcSUS1 polypeptides. Phosphorylation at Ser-11 appears to protect RcSUS1 from proteolysis, rather than influence its kinetic properties or partitioning between the soluble cytosol and microsomal membranes. PMID:25313400

  13. Digital Collections, Digital Libraries & the Digitization of Cultural Heritage Information.

    Lynch, Clifford

    2002-01-01

    Discusses digital collections and digital libraries. Topics include broadband availability; digital rights protection; content, both non-profit and commercial; digitization of cultural content; sustainability; metadata harvesting protocol; infrastructure; authorship; linking multiple resources; data mining; digitization of reference works;…

  14. Derivation of the human embryonic stem cell line RCe014-A (RC-10

    P.A. De Sousa

    2016-03-01

    Full Text Available The human embryonic stem cell line RCe014-A (RC-10 was derived from a fresh oocyte voluntarily donated as unsuitable and surplus to fertility requirements following ethics committee approved informed consent under licence from the UK Human Fertilisation and Embryology Authority. The cell line shows normal pluripotency marker expression and differentiation to the three germ layers in vitro. It has a mixed 46XY and 47XY +12 male karyotype and microsatellite PCR identity, HLA and blood group typing data is available.

  15. Derivation of the human embryonic stem cell line RCe006-A (RC-2

    P.A. De Sousa

    2016-03-01

    Full Text Available The human embryonic stem cell line RCe006-A (RC-2 was derived from a frozen and thawed blastocyst voluntarily donated as surplus to fertility requirements following ethics committee approved informed consent under licence from the UK Human Fertilisation and Embryology Authority. The cell line exhibits expression of expected pluripotency markers and in vitro differentiation potential to three germinal lineage representative cell populations. It has a male trisomy 12 karyotype (47XY, +12. Microsatellite DNA marker identity and HLA and blood group typing data are available.

  16. Derivation of the human embryonic stem cell line RCe010-A (RC-6

    P.A. De Sousa

    2016-03-01

    Full Text Available The human embryonic stem cell line RCe010-A (RC-6 was derived from a frozen and thawed blastocyst voluntarily donated as unsuitable and surplus to fertility requirements following ethics committee approved informed consent under licence from the UK Human Fertilisation and Embryology Authority. The cell line shows normal pluripotency marker expression and differentiation to the three germ layers in vitro. It has a normal 46XY male karyotype and microsatellite PCR identity, HLA and blood group typing data are available.

  17. Derivation of the human embryonic stem cell line RCe012-A (RC-8

    P.A. De Sousa

    2016-03-01

    Full Text Available The human embryonic stem cell line RCe012-A (RC-8 was derived from a frozen and thawed day 5 embryo cultivated to the blastocyst stage. The embryo was voluntarily donated as unsuitable and surplus to fertility requirements following ethics committee approved informed consent under licence from the UK Human Fertilisation and Embryology Authority. The cell line shows normal pluripotency marker expression and differentiation to the three germ layers in vitro. It has a normal 46XX female karyotype and microsatellite PCR identity, HLA and blood group typing data is available.

  18. Overview of the divertor design and its integration into RTO/RC-ITER

    Janeschitz, G.; Tivey, R.; Antipenkov, A.; Barabash, V.; Chiocchio, S.; Federici, G.; Heidl, H.; Ibbott, C.; Martin, E.

    2000-01-01

    The design of the divertor and its integration into the reduced technical objectives/reduced cost-international thermonuclear energy reactor (RTO/RC-ITER) is based on the experience gained from the 1998 design of international thermonuclear energy reactor (ITER) and on the research and development performed throughout the engineering design activities (EDA). This paper gives an overview of the layout and functional design of the RTO/RC-ITER divertor, including the integration into the machine and the remote replacement of the divertor cassettes. Design guidelines are presented which have allowed quick preparation of divertor layouts suitable for further study using the B2-EIRENE edge plasma code. As in the 1998 design, the divertor is segmented into cassettes, and the segmentation, which is three per sector, is driven by access through the divertor level ports. Maintaining this access and avoiding interference with poloidal field coils means that the divertor level ports need to be inclined (7 deg.). This opens up the possibility of incorporating inboard and outboard baffles into the divertor cassettes. The cassettes are transported in-vessel by making use of the toroidal rails onto which the cassettes are finally clamped in position. Significant reduction of the space available between the X-point and the vacuum vessel results in re-positioning of the toroidal rails in order to retain sufficient depth for the inner and outer divertor legs. This, in turn, requires some changes to the remote handling (RH) concept. Remote handling (RH) is now based on using a cantilevered articulated gripper during the radial movement of the cassettes inside the RH ports. However, the principle to use a cassette toroidal mover (CTM) for in vessel handling is unchanged, hence maintaining the validity of previous EDA research and development. The space previously left below the cassettes for RH was also used for pumping. Elimination of this space has led to re-siting of the pumping

  19. Vibration based structural assessment of the rehabilitation intervention in r.c. segmental bridge

    Franchetti Paolo; Frizzarin Michele; Leonardi Andrea; Zeni Fabio

    2015-01-01

    A vibration based structural assessment campaign was carried out on a r.c. segmental bridge in North East Italy. The bridge has a cantilever static scheme, fixed at the top of the piers and with a hinge at the centre of the span. The particular configuration of the hinge consists in a couple of steel elements, each one composed by a tongue and groove joint. Since the year 1960, the hinge was subjected to consumption and degradation, that caused a malfunctioning of the device. An intervention ...

  20. Prediction of Global and Localized Damage and Future Reliability for RC Structures subject to Earthquakes

    Köyluoglu, H.U.; Nielsen, Søren R.K.; Cakmak, A.S.

    1997-01-01

    the arrival of the first earthquake from non-destructive vibration tests or via structural analysis. The previous excitation and displacement response time series is employed for the identification of the instantaneous softening using an ARMA model. The hysteresis parameters are updated after each earthquake....... The proposed model is next generalized for the MDOF system. Using the adapted models for the structure and the global damage state, the global damage in a future earthquake can then be estimated when a suitable earthquake model is applied. The performance of the model is illustrated on RC frames which were...

  1. Prediction of Global and Localized Damage and Future Reliability for RC Structures subject to Earthquakes

    Köyluoglu, H.U.; Nielsen, Søren R.K.; Cakmak, A.S.

    1994-01-01

    the arrival of the first earthquake from non-destructive vibration tests or via structural analysis. The previous excitation and displacement response time series is employed for the identification of the instantaneous softening using an ARMA model. The hysteresis parameters are updated after each earthquake....... The proposed model is next generalized for the MDOF system. Using the adapted models for the structure and the global damage state, the global damage in a future earthquake can then be estimated when a suitable earthquake model is applied. The performance of the model is illustrated on RC frames which were...

  2. Human geminin promotes pre-RC formation and DNA replication by stabilizing CDT1 in mitosis

    Ballabeni, Andrea; Melixetian, Marina; Zamponi, Raffaella

    2004-01-01

    -mediated degradation by inhibiting its ubiquitination. In particular, Geminin ensures basal levels of CDT1 during S phase and its accumulation during mitosis. Consistently, inhibition of Geminin synthesis during M phase leads to impairment of pre-RC formation and DNA replication during the following cell cycle....... Moreover, we show that inhibition of CDK1 during mitosis, and not Geminin depletion, is sufficient for premature formation of pre-RCs, indicating that CDK activity is the major mitotic inhibitor of licensing in human cells. Taken together with recent data from our laboratory, our results demonstrate...

  3. A numerical design approach for single amplifier, Active-RC Butterworth filter of order 5

    Gaunholt, Hans

    2007-01-01

    A design method is presented for the design of all pole lowpass active-RC filters applying operational amplifiers. The operational amplifier model used is the integrator model: omegat/s where omegat is the unity gain frequency. The design method is used for the design of a fifth order Butterworth filter applying just one operational amplifier coupled as a unity gain amplifier. It is shown that the influence from the real operational amplifier may be reduced by trimming just one resistor in th...

  4. AERODYNAMIC CHARACTERISTICS CALCULATION ON SINGLE ROTOR BLADE USING FLOEFD, ANSYS FLUENT AND RC-VTOL

    2016-01-01

    Full Text Available The results of computational simulation of helicopter rotor's single blade flow, for which experimental (model test data are published, are represented in this article. The calculations were made in the universal software package of CFD modeling FloEFD, which was based on the solution of averaged equations' system of Navier-Stocks, as well as in the program software RC-VTOL using the vortex method. The obtained results are compared with experimental data and modeling results in the program software ANSYS Fluent (license of TsAGI Nr. 501024. The work shows satisfactory, and in some cases good calculation data reconciliation getting with different techniques including experimental.

  5. digital natives and digital immigrants

    Cardina, Bruno; Francisco, Jerónimo; Reis, Pedro; trad. Silva, Fátima

    2011-01-01

    This article focuses on the generational gaps in school learning. Initially, we have tried to provide the framework in relation to the term digital native in order to understand the key aspects of the generation born after the advent and the global use of the Internet. They were found to be “multitasking” people, linked to technology and connectivity, as opposed to digital immigrants, born in an earlier period and seeking to adapt to the technological world. We also present some r...

  6. Digital evidence

    Lukić Tatjana

    2012-01-01

    Full Text Available Although computer makes human activities faster and easier, innovating and creating new forms of work and other kinds of activities, it also influenced the criminal activity. The development of information technology directly affects the development of computer forensics without which, it can not even imagine the discovering and proving the computer offences and apprehending the perpetrator. Information technology and computer forensic allows us to detect and prove the crimes committed by computer and capture the perpetrators. Computer forensics is a type of forensics which can be defined as a process of collecting, preserving, analyzing and presenting digital evidence in court proceedings. Bearing in mind, that combat against crime, in which computers appear as an asset or object of the offense, requires knowledge of digital evidence as well as specific rules and procedures, the author in this article specifically addresses the issues of digital evidence, forensic (computer investigation, specific rules and procedures for detecting, fixing and collecting digital evidence and use of this type of evidence in criminal proceedings. The author also delas with international standards regarding digital evidence and cyber-space investigation.

  7. Digital watermark

    Jasna Maver

    2000-01-01

    Full Text Available The huge amount of multimedia contents available on the World-Wide-Web is beginning to raise the question of their protection. Digital watermarking is a technique which can serve various purposes, including intellectual property protection, authentication and integrity verification, as well as visible or invisible content labelling of multimedia content. Due to the diversity of digital watermarking applicability, there are many different techniques, which can be categorised according to different criteria. A digital watermark can be categorised as visible or invisible and as robust or fragile. In contrast to the visible watermark where a visible pattern or image is embedded into the original image, the invisible watermark does not change the visual appearance of the image. The existence of such a watermark can be determined only through a watermark ex¬traction or detection algorithm. The robust watermark is used for copyright protection, while the fragile watermark is designed for authentication and integrity verification of multimedia content. A watermark must be detectable or extractable to be useful. In some watermarking schemes, a watermark can be extracted in its exact form, in other cases, we can detect only whether a specific given watermarking signal is present in an image. Digital libraries, through which cultural institutions will make multimedia contents available, should support a wide range of service models for intellectual property protection, where digital watermarking may play an important role.

  8. Development of a hysteresis model for R/C columns subjected to bi-axial lateral loading

    Dutta, Sekhar Chandra; Chowdhury, Rajib; Roy, Raghupati; Reddy, G. Rami

    2003-01-01

    Recent investigations on dynamic response of reinforced concrete (R/C) structures have confirmed that the R/C structural members undergo much more inelastic deformation in each of the two mutually perpendicular directions under bi-directional seismic loading, than that observed only under unidirectional ground motion. To predict the seismic response of R/C structure with fair accuracy demands, a faithful model that can incorporate the effect of biaxial bending interaction in column. This model should not have high computational demand but should adequately reflect the stiffness degrading and strength deterioration characteristics of R/C structural members. Present study is an effort to develop such a bi-directional hysteresis model accounting the effect of interaction between lateral loadings in two orthogonal directions. The development of the present model is based on the yield surface approach and it can incorporate both strength and stiffness degradation characteristics, which is unavoidable in R/C structures during cyclic loading. The performance of the proposed model/ is demonstrated through the prediction of available experimental results of a reinforced concrete column, subjected to biaxial loading. (author)

  9. Lactobacillus rhamnosus RC007 intended for feed additive: immune-stimulatory properties and ameliorating effects on TNBS-induced colitis.

    Dogi, C; García, G; De Moreno de LeBlanc, A; Greco, C; Cavaglieri, L

    2016-09-01

    Lactobacillus rhamnosus RC007 is a potential probiotic bacterium that can exert beneficial effects as supplement for animal feed, by improving the immune status in healthy host, and by providing therapeutic benefits to infected/inflamed animals. The aim of the present work was to evaluate in vivo the beneficial properties of L. rhamnosus RC007, intended for animal feed, when administered to healthy and trinitro-benzene-sulfonic-acid (TNBS) colitis induced BALB/c mice. The administration of L. rhamnosus RC007 to healthy mice during 10 days increased the phagocytic activity of peritoneal macrophages and the number of immunoglobulin A+ cells in the lamina proper of the small intestine. Significant increases of monocyte chemotactic protein 1, interleukin (IL)-10 and tumour necrosis factor alpha (TNF-α) concentrations, and in the ratio between anti- and pro-inflammatory cytokines (IL-10/TNF-α) were observed in intestinal fluids after administration of bacteria. In the inflammation model, less body weight loss, macroscopic and histological damages in the large intestine were accompanied by increased IL-10/TNF-α ratio in the intestinal fluids of mice from the L. rhamnosus-TNBS group when compared to the TNBS group. In a healthy host, the oral administration of L. rhamnosus RC007 kept the gut immune system stimulated allowing a faster response to noxious stimulus. Mice that received L. rhamnosus RC007 also decreased the severity of the intestinal inflammation.

  10. Fuel cycle design evolution from FDR-ITER to RTO/RC-ITER

    Murdoch, D.K.; Glugla, M.; Kveton, O.

    2000-01-01

    Instantaneous fuelling and plasma exhaust flow rates for the reduced technical objective/reduced cost version of International Thermonuclear Experimental Reactor (RTO/RC-ITER) are similar to those described in the Final Design Report (FDR) of ITER, despite the reduction in fusion power by a factor of about two. However, the reduced pulse length and the lower fraction of campaign time spent in burn mode, together with the lower integrated operating lifetime proposed, will generate cost savings in several systems of the fuel cycle. As the quantity of tritium handled per pulse is now smaller, this could be buffered, allowing systems in the tritium plant still to operate in steady state mode as in the FDR design, thereby increasing the potential for downsizing of system capacities. The lower operating time fraction will increase performance margins for some systems, for example, the Torus Exhaust Gas Processing System (TEGPS) which was designed to meet a specified daily release rate for the FDR design conditions which were more onerous than RTO/RC-ITER. As no break through of tritium into cooling water is now expected, the duties of the Water and Atmosphere Detritiation Systems are considerably reduced, and design concepts which are simpler, cheaper and more amenable to modular implementation can be adopted

  11. Shear Resistance Capacity of Interface of Plate-Studs Connection between CFST Column and RC Beam

    Qianqian Wang

    2017-01-01

    Full Text Available The combination of a concrete-filled steel tube (CFST column and reinforced concrete (RC beam produces a composite structural system that affords good structural performance, functionality, and workability. The effective transmission of moments and shear forces from the beam to the column is key to the full exploitation of the structural performance. The studs of the composite beam transfer the interfacial shear force between the steel beam and the concrete slab, with the web bearing most of the vertical shear force of the steel beam. In this study, the studs and vertical steel plate were welded to facilitate the transfer of the interfacial shear force between the RC beam and CFST column. Six groups of a total of 18 specimens were used to investigate the shear transfer mechanism and failure mode of the plate-studs connection, which was confirmed to effectively transmit the shear forces between the beam and column. The results of theoretical calculations were also observed to be in good agreement with the experimental measurements.

  12. Overview and evolution of the LeRC PMAD DC test bed

    Soeder, James F.; Frye, Robert J.

    1992-01-01

    Since the beginning of the Space Station Freedom Program (SSFP), the Lewis Research Center (LeRC) has been developed electrical power system test beds to support the overall design effort. Through this time, the SSFP has changed the design baseline numerous times, however, the test bed effort has endeavored to track these changes. Beginning in August 1989 with the baseline and an all DC system, a test bed was developed to support the design baseline. The LeRC power measurement and distribution (PMAD) DC test bed and the changes in the restructure are described. The changes included the size reduction of primary power channel and various power processing elements. A substantial reduction was also made in the amount of flight software with the subsequent migration of these functions to ground control centers. The impact of these changes on the design of the power hardware, the controller algorithms, the control software, and a description of their current status is presented. An overview of the testing using the test bed is described, which includes investigation of stability and source impedance, primary and secondary fault protection, and performance of a rotary utility transfer device. Finally, information is presented on the evolution of the test bed to support the verification and operational phases of the SSFP in light of these restructure scrubs.

  13. A More Sustainable Way for Producing RC Sandwich Panels On-Site and in Developing Countries

    Lorenzo Graziani

    2017-03-01

    Full Text Available The purpose of this work is to assess if traditionally used welded connectors for joining the two skins of reinforced concrete (RC sandwich panels, used as structural walls and horizontal structural elements, can be substituted with bent ones. In this way, the scope of the effort is to reduce drastically the energy required during manufacturing, thus having a much more sustainable building product. Wire mesh on site production, in fact, requires a large amount of energy for the welding process, as stated by several Environmental Product Declaration (EPD. In addition, the production of sandwich panels with bent connectors requires a low level of automation and no qualified labor allowing the diffusion in developing countries. The procedures used to execute the work were both experimental and numerical. Structural performances were examined by testing full-scale sandwich panels under (axial and eccentric compression and flexural loads. Additionally, a Finite Element (FE study was developed to investigate and to optimize the dimension of welded mesh and the number of connectors. The major findings show that it is possible to substitute welded connectors with bent ones without compromising the structural performance of the tested RC sandwich panels, thus having a more sustainable way for producing these last ones.

  14. Quasistatic Seismic Damage Indicators for RC Structures from Dissipating Energies in Tangential Subspaces

    Wilfried B. Krätzig

    2014-01-01

    Full Text Available This paper applies recent research on structural damage description to earthquake-resistant design concepts. Based on the primary design aim of life safety, this work adopts the necessity of additional protection aims for property, installation, and equipment. This requires the definition of damage indicators, which are able to quantify the arising structural damage. As in present design, it applies nonlinear quasistatic (pushover concepts due to code provisions as simplified dynamic design tools. Substituting so nonlinear time-history analyses, seismic low-cycle fatigue of RC structures is approximated in similar manner. The treatment will be embedded into a finite element environment, and the tangential stiffness matrix KT in tangential subspaces then is identified as the most general entry for structural damage information. Its spectra of eigenvalues λi or natural frequencies ωi of the structure serve to derive damage indicators Di, applicable to quasistatic evaluation of seismic damage. Because det KT=0 denotes structural failure, such damage indicators range from virgin situation Di=0 to failure Di=1 and thus correspond with Fema proposals on performance-based seismic design. Finally, the developed concept is checked by reanalyses of two experimentally investigated RC frames.

  15. 3D FE Analysis of RC Beams Externally Strengthened with SRG/SRP Systems

    Francesco Bencardino

    2016-05-01

    Full Text Available The purpose of this study is to evaluate, through a nonlinear Finite Element (FE analysis, the structural behavior of Reinforced Concrete (RC beams externally strengthened by using Steel Reinforced Grout (SRG and Steel Reinforced Polymer (SRP systems. The parameters taken into account were the external strengthening configuration, with or without U-wrap end anchorages, as well as the strengthening materials. The numerical simulations were carried out by using a three-dimensional (3D FE model. The linear and nonlinear behavior of all materials was modeled by appropriate constitutive laws and the connection between concrete substrate and external reinforcing layer was simulated by means of cohesive surfaces with appropriate bond-slip laws. In order to overcome convergence difficulties, to simulate the quasi-static response of the strengthened RC beams, a dynamic approach was adopted. The numerical results in terms of load-displacement curves, failure modes, and load and strain values at critical stages were validated against some experimental data. As a result, the proposed 3D FE model can be used to predict the structural behavior up to ultimate stage of similar strengthened beams without carrying out experimental tests.

  16. Prediction of RC multi-story construction performance with a new proposed design spectrum approach

    James Haido

    2016-02-01

    Full Text Available The consideration of novel response spectrum analysis to check the reinforced concrete RC buildings resistance towards the seismic risks in Iraq has not been investigated so far. Due to the increasing of frequent earthquakes with moderate intensity in north of Iraq, caution should be taken into account in building design especially with considering the design codes. Where, there are no specific Iraqi standards of earthquake for building design. Thus, the proposing of new response spectrum relationship matching the properties of Kurdistan region (north of Iraq soil is considered essential with considering of novel stiffness or inertia reduction factors for concrete sections. Present endeavor is devoted to develop new design spectra dynamic analysis of RC multistory building located in Duhok city-Iraq. Influence of proposed concrete section reduction factors on the analysis outcomes has been investigated also. Great role has been observed for introducing of stiffness reduction factors in present seismic analysis represent in magnifying of lateral deformation of building of more than 50%. Proper matching was obtained between current proposed spectrum design outputs and that for other analytical approaches.

  17. RC beams shear-strengthened with fabric-reinforced-cementitious-matrix (FRCM) composite

    Loreto, Giovanni; Babaeidarabad, Saman; Leardini, Lorenzo; Nanni, Antonio

    2015-12-01

    The interest in retrofit/rehabilitation of existing concrete structures has increased due to degradation and/or introduction of more stringent design requirements. Among the externally-bonded strengthening systems fiber-reinforced polymers is the most widely known technology. Despite its effectiveness as a material system, the presence of an organic binder has some drawbacks that could be addressed by using in its place a cementitious binder as in fabric-reinforced cementitious matrix (FRCM) systems. The purpose of this paper is to evaluate the behavior of reinforced concrete (RC) beams strengthened in shear with U-wraps made of FRCM. An extensive experimental program was undertaken in order to understand and characterize this composite when used as a strengthening system. The laboratory results demonstrate the technical viability of FRCM for shear strengthening of RC beams. Based on the experimental and analytical results, FRCM increases shear strength but not proportionally to the number of fabric plies installed. On the other hand, FRCM failure modes are related with a high consistency to the amount of external reinforcement applied. Design considerations based on the algorithms proposed by ACI guidelines are also provided.

  18. Interaction between corrosion crack width and steel loss in RC beams corroded under load

    Malumbela, Goitseone; Alexander, Mark; Moyo, Pilate

    2010-01-01

    This paper presents results and discussions on an experimental study conducted to relate the rate of widening of corrosion cracks with the pattern of corrosion cracks as well as the level of steel corrosion for RC beams (153 x 254 x 3000 mm) that were corroded whilst subjected to varying levels of sustained loads. Steel corrosion was limited to the tensile reinforcement and to a length of 700 mm at the centre of the beams. The rate of widening of corrosion cracks as well as strains on uncracked faces of RC beams was constantly monitored during the corrosion process, along the corrosion region and along other potential cracking faces of beams using a demec gauge. The distribution of the gravimetric mass loss of steel along the corrosion region was measured at the end of the corrosion process. The results obtained showed that: the rate of widening of each corrosion crack is dependent on the overall pattern of the cracks whilst the rate of corrosion is independent of the pattern of corrosion cracks. A mass loss of steel of 1% was found to induce a corrosion crack width of about 0.04 mm.

  19. Semi-Active Control of Precast RC Columns under Seismic Action

    Caterino, Nicola; Spizzuoco, Mariacristina

    2017-10-01

    This work is inspired by the idea of dissipating seismic energy at the base of prefabricated RC columns via semi-active (SA) variable dampers exploiting the base rocking. It was performed a wide numerical campaign to investigate the seismic behaviour of a pre-cast RC column with a variable base restraint. The latter is based on the combined use of a hinge, elastic springs, and magnetorheological (MR) dampers remotely controlled according to the instantaneous response of the structural component. The MR devices are driven by a SA control algorithm purposely written to modulate the dissipative capability so as to reduce base bending moment without causing excessive displacement at the top. The proposed strategy results to be really promising, since the base restraint relaxation, that favours the base moment demand reduction, is accompanied by a high enhancement of the dissipated energy due to rocking that can be even able to reduce top displacement in respect to the “fixed base rotation” conditions.

  20. Predicting the seismic performance of typical R/C healthcare facilities: emphasis on hospitals

    Bilgin, Huseyin; Frangu, Idlir

    2017-09-01

    Reinforced concrete (RC) type of buildings constitutes an important part of the current building stock in earthquake prone countries such as Albania. Seismic response of structures during a severe earthquake plays a vital role in the extent of structural damage and resulting injuries and losses. In this context, this study evaluates the expected performance of a five-story RC healthcare facility, representative of common practice in Albania, designed according to older codes. The design was based on the code requirements used in this region during the mid-1980s. Non-linear static and dynamic time history analyses were conducted on the structural model using the Zeus NL computer program. The dynamic time history analysis was conducted with a set of ground motions from real earthquakes. The building responses were estimated in global levels. FEMA 356 criteria were used to predict the seismic performance of the building. The structural response measures such as capacity curve and inter-story drift under the set of ground motions and pushover analyses results were compared and detailed seismic performance assessment was done. The main aim of this study is considering the application and methodology for the earthquake performance assessment of existing buildings. The seismic performance of the structural model varied significantly under different ground motions. Results indicate that case study building exhibit inadequate seismic performance under different seismic excitations. In addition, reasons for the poor performance of the building is discussed.

  1. Barometrický výškoměr pro RC modely letadel

    Dujíček, Martin

    2012-01-01

    Cílem této práce je návrh barometrického výškoměru určeného pro RC modely letadel. Během letu je zaznamenávána hodnota ze snímacího prvku do paměti. Po ukončení letu a po připojení zařízení k počítači je možné data přečíst nebo smazat. Přijatá data je dále možné zpracovat například do grafické podoby. The aim of this thesis is to design barometric altimeter for RC plane models. During the flight the value from sensing element is stored in memory. After the flight and connect to computer it...

  2. Full Scale RC Beam-Column Joints Strengthened with Steel Reinforced Polymer Systems

    De Vita, Alessandro; Napoli, Annalisa; Realfonzo, Roberto

    2017-07-01

    This paper presents the results of an experimental campaign performed at the Laboratory of Materials and Structural Testing of the University of Salerno (Italy) in order to investigate the seismic performance of RC beam-column joints strengthened with Steel Reinforced Polymer (SRP) systems. With the aim to represent typical façade frames’ beam-column subassemblies found in existing RC buildings, specimens were provided with two short beam stubs orthogonal to the main beam and were designed with inadequate seismic details. Five members were strengthened by using two different SRP layouts while the remaining ones were used as benchmarks. Once damaged, two specimens were also repaired, retrofitted with SRP and subjected to cyclic test again. The results of cyclic tests performed on SRP strengthened joints are examined through a comparison with the outcomes of the previous experimental program including companion specimens not provided with transverse beam stubs and strengthened by Carbon Fiber Reinforced Polymer (CFRP) systems. In particular, both qualitative and quantitative considerations about the influence of the confining effect provided by the secondary beams on the joint response, the suitability of all the adopted strengthening solutions (SRP/CFRP systems), the performances and the failure modes experienced in the several cases studied are provided.

  3. A monolithic constant-fraction discriminator using distributed R-C delay-line shaping

    Simpson, M.L.; Young, G.R.; Xu, M.

    1995-01-01

    A monolithic, CMOS, constant-fraction discriminator (CFD) was fabricated in the Orbit Semiconductor, 1.2 μ N-well process. This circuit uses an on-chip, distributed, R-C delay-line to realize the constant-fraction shaping. The delay-line is constructed from a narrow, 500-μ serpentine layer of polysilicon above a wide, grounded, second layer of polysilicon. This R-C delay-line generates about 1.1 ns of delay for 5 ns risetime signals with a slope degradation of only ≅ 15% and an amplitude reduction of about 6.1%. The CFD also features an automatic walk adjustment. The entire circuit, including the delay line, has a 200 μ pitch and is 950 μ long. The walk for a 5 ns risetime signal was measured as ± 100 ps over the 100:1 dynamic range from -15 mV to -1.5 mV. to -1.5 V. The CFD consumes 15 mW

  4. Effect of discrete glass fibers on the behavior of R.C. Beams exposed to fire

    Magdy Riad

    2017-08-01

    Full Text Available The main objective of this paper is to investigate the effect of adding discrete glass fibers on the behavior of reinforced concrete (RC beams under different fire and cooling conditions. Eighteen beams with different concrete compressive strengths were tested to study the behavior of reinforced concrete (RC beams containing discrete glass fibers when exposed to different fire and cooling conditions. Nine beams were prepared from normal strength concrete (NSC with compressive strength equal to 35 MPa while the other beams were prepared from high strength concrete (HSC with compressive strength equal to 60 MPa. The beams contained different contents of discrete glass fibers. The modes of failure of tested specimens show that the crack patterns change according to fire condition and fiber content. Analysis of test results show that adding discrete glass fibers to NSC increased the residual stiffness of the tested specimens after firing and decreased the rate of the deflection gain during firing. Also adding fibers to concrete has a limited positive effect on the ultimate strength of the specimens compared to the control specimens. Its effect on deflection due to fire is more pronounced. Finally, the recommended optimum ratio of discrete glass fibers is not more than 0.5% of the total concrete weight.

  5. Effect of CFRP and TRM Strengthening of RC Slabs on Punching Shear Strength

    Husain Abbas

    Full Text Available Abstract The paper presents experiments involving punching of RC slabs strengthened using externally bonded carbon fiber reinforced polymer (CFRP sheet and textile reinforced mortar (TRM. Twelve RC slab specimens of two concrete grades (39.9 and 63.2 MPa and employing two strengthening schemes (CFRP and TRM were tested. Specimens were supported on two opposite edges. Experimental load-displacement variations show two peak loads in strengthened slabs and one peak followed by a plateau in control. Second peak or the plateau corresponds to the combined action of aggregate interlock and the dowel action of back face rebars and strengthening layers. The dowel action of back face rebars and strengthening layers had no role in ultimate punching load (i.e. first peak. Strengthened slabs showed 9-18% increase in ultimate punching load (i.e. first peak whereas there was significant increase in the second peak load (190-276% for CFRP; 55-136% for TRM and energy absorption (~66% for CFRP and 22-56% for TRM. An analytical model was also developed for predicting the punching shear strength (first and second peaks of strengthened slabs showing good comparison with experiments.

  6. Prestress Loss of CFL in a Prestressing Process for Strengthening RC Beams

    Xinyan Guo

    2017-01-01

    Full Text Available A prestressing system was designed to strengthen reinforced concrete (RC beams with prestressed carbon fiber laminate (CFL. During different prestressing processes, prestress loss was measured using strain gauges attached on the surface of CFL along the length direction. The prestress loss was 50–68% of the whole prestress loss, which is typically associated with CFL slipping between the grip anchors. Approximately 20–27% of the prestress loss was caused by the elastic shortening of the RC beam. An analytical model using linear-elastic theory was constructed to calculate the prestress loss caused by CFL slipping between the anchors and the elastic shortening of the strengthened beams. The compared results showed that the analytical model of prestress loss can describe the experimental data well. Methods of reducing the prestress loss were also suggested. Compared to other experiments, the prestressing system proposed by this research group was effective because the maximum percentage of prestress loss was 14.9% and the average prestress loss was 12.5%.

  7. Scientific Performance Analysis of the SYZ Telescope Design versus the RC Telescope Design

    Ma, Donglin; Cai, Zheng

    2018-02-01

    Recently, Su et al. propose an innovative design, referred as the “SYZ” design, for China’s new project of a 12 m optical-infrared telescope. The SYZ telescope design consists of three aspheric mirrors with non-zero power, including a relay mirror below the primary mirror. SYZ design yields a good imaging quality and has a relatively flat field curvature at Nasmyth focus. To evaluate the science-compatibility of this three-mirror telescope, in this paper, we thoroughly compare the performance of SYZ design with that of Ritchey–Chrétien (RC) design, a conventional two-mirror telescope design. Further, we propose the Observing Information Throughput (OIT) as a metric for quantitatively evaluating the telescopes’ science performance. We find that although a SYZ telescope yields a superb imaging quality over a large field of view, a two-mirror (RC) telescope design holds a higher overall throughput, a better diffraction-limited imaging quality in the central field of view (FOV < 5‧) which is better for the performance of extreme Adaptive Optics (AO), and a generally better scientific performance with a higher OIT value. D. Ma & Z. Cai contributed equally to this paper.

  8. Effect of URM infills on seismic vulnerability of Indian code designed RC frame buildings

    Haldar, Putul; Singh, Yogendra; Paul, D. K.

    2012-03-01

    Unreinforced Masonry (URM) is the most common partitioning material in framed buildings in India and many other countries. Although it is well-known that under lateral loading the behavior and modes of failure of the frame buildings change significantly due to infill-frame interaction, the general design practice is to treat infills as nonstructural elements and their stiffness, strength and interaction with the frame is often ignored, primarily because of difficulties in simulation and lack of modeling guidelines in design codes. The Indian Standard, like many other national codes, does not provide explicit insight into the anticipated performance and associated vulnerability of infilled frames. This paper presents an analytical study on the seismic performance and fragility analysis of Indian code-designed RC frame buildings with and without URM infills. Infills are modeled as diagonal struts as per ASCE 41 guidelines and various modes of failure are considered. HAZUS methodology along with nonlinear static analysis is used to compare the seismic vulnerability of bare and infilled frames. The comparative study suggests that URM infills result in a significant increase in the seismic vulnerability of RC frames and their effect needs to be properly incorporated in design codes.

  9. Digital Creativity

    Petersson Brooks, Eva; Brooks, Anthony Lewis

    2014-01-01

    This paper reports on a study exploring the outcomes from children’s play with technology in early childhood learning practices. The paper addresses questions related to how digital technology can foster creativity in early childhood learning environments. It consists of an analysis of children......’s interaction with the KidSmart furniture focusing on digital creativity potentials and play values suggested by the technology. The study applied a qualitative approach and included125 children (aged three to five), 10 pedagogues, and two librarians. The results suggests that educators should sensitively...... consider intervening when children are interacting with technology, and rather put emphasize into the integration of the technology into the environment and to the curriculum in order to shape playful structures for children’s digital creativity....

  10. Digital radiography

    Rath, M.; Lissner, J.; Rienmueller, R.; Haendle, J.; Siemens A.G., Erlangen

    1984-01-01

    Using a prototype of an electronic, universal examination unit equipped with a special X-ray TV installation, spotfilm exposures and digital angiographies with high spatial resolution and wide-range contrast could be made in the clinic for the first time. With transvenous contrast medium injection, the clinical results of digital angiography show excellent image quality in the region of the carotids and renal arteries as well as the arteries of the extremities. The electronic series exposures have an image quality almost comparable to the quality obtained with cutfilm changers in conventional angiography. There are certain limitations due to the input field of 25 cm X-ray image intensified used. In respect of the digital angiography imaging technique, the electronic universal unit is fully suitable for clinical application. (orig.) [de

  11. Seismic Retrofitting: Reinforced Concrete (RC shear wall versus Reinforcement of RC element by Carbon Fiber Reinforced Polymer (CFRP using PUSHOVER analysis

    Yahya RIYAD

    2016-12-01

    Full Text Available Seismic retrofitting of constructions vulnerable to earthquakes is a current problem of great political and social relevance. During the last sixty years, moderate to severe earthquakes have occurred in Morocco (specifically in Agadir 1960 and Hoceima 2004. Such events have clearly shown the vulnerability of the building stock in particular and of the built environment in general. Hence, it is very much essential to retrofit the vulnerable building to cope up for the next damaging earthquake. In this paper, the focus will be on a comparative study between two techniques of seismic retrofitting, the first one is a reinforcement using carbon fiber reinforced polymer (CFRP applied to RC elements by bonding , and the second one is a reinforcement with a shear wall. For this study, we will use a non-linear static analysis -also known as Pushover analysis - on a reinforced concrete structure consisting of beams and columns, and composed from eight storey with a gross area of 240 m², designed conforming to the Moroccan Seismic code[1].

  12. Digital photogrammetry

    Egels, Yves

    2003-01-01

    Photogrammetry is the use of photography for surveying primarily and is used for the production of maps from aerial photographs. Along with remote sensing, it represents the primary means of generating data for Geographic Information Systems (GIS). As technology develops, it is becoming easier to gain access to it. The cost of digital photogrammetric workstations are falling quickly and these new tools are therefore becoming accessible to more and more users. Digital Photogrammetry is particularly useful as a text for graduate students in geomantic and is also suitable for people with a good basic scientific knowledge who need to understand photogrammetry, and who wish to use the book as a reference.

  13. Digital Marketing

    Jerry Wind; Vijay Mahajan

    2002-01-01

    The digital revolution has shaken marketing to its core with consumers being offered greater price transparency and often even the chance to dictate the price. What does pricing mean in a world in which customers propose their own prices (as at priceline.com) or buyers and sellers haggle independently in auctions (as at e-Bay)? The most significant changes in the digital marketing show the emergence of 'cyber consumers', the cyber business-to-business world and the changing reality of an incr...

  14. Digital "X"

    Baiyere, Abayomi; Grover, Varun; Gupta, Alok

    2017-01-01

    Interest in using digital before existing research concepts seem to be on the rise in the IS field. This panel is positioned to explore what value lies in labelling our research as digital “x” as opposed to the well established IT “x” (where “x” can be strategy, infrastructure, innovation, artifa...... between this stream of research and existing research. Central among the expected output of the panel is the advancement of suggestions for future research and the critical pitfalls to avoid in doing so....

  15. Digital Radiography

    1986-01-01

    System One, a digital radiography system, incorporates a reusable image medium (RIM) which retains an image. No film is needed; the RIM is read with a laser scanner, and the information is used to produce a digital image on an image processor. The image is stored on an optical disc. System allows the radiologist to "dial away" unwanted images to compare views on three screens. It is compatible with existing equipment and cost efficient. It was commercialized by a Stanford researcher from energy selective technology developed under a NASA grant.

  16. Digital filters

    Hamming, Richard W

    1997-01-01

    Digital signals occur in an increasing number of applications: in telephone communications; in radio, television, and stereo sound systems; and in spacecraft transmissions, to name just a few. This introductory text examines digital filtering, the processes of smoothing, predicting, differentiating, integrating, and separating signals, as well as the removal of noise from a signal. The processes bear particular relevance to computer applications, one of the focuses of this book.Readers will find Hamming's analysis accessible and engaging, in recognition of the fact that many people with the s

  17. Digital voltmeter

    Yohannes Kamadi; Soekarno.

    1976-01-01

    The electrical voltage measuring equipment with digital display has been made. This equipment uses four digits display with single polarity measurement and integrating system. Pulses from the oscillator will be counted and converted to the staircase voltages, and compared to the voltage measured. When the balance is already achieved, the pulse will appear at the comparator circuit. This pulse will be used to trigger univibrator circuit. The univibrator output is used as signal for stopping the counting, and when reading time T already stops, the counting system will be reset. (authors)

  18. Digital communication

    Das, Apurba

    2010-01-01

    ""Digital Communications"" presents the theory and application of the philosophy of Digital Communication systems in a unique but lucid form. This book inserts equal importance to the theory and application aspect of the subject whereby the authors selected a wide class of problems. The Salient features of the book are: the foundation of Fourier series, Transform and wavelets are introduces in a unique way but in lucid language; the application area is rich and resemblance to the present trend of research, as we are attached with those areas professionally; a CD is included which contains code

  19. Digital literacies

    Hockly, Nicky; Pegrum, Mark

    2014-01-01

    Dramatic shifts in our communication landscape have made it crucial for language teaching to go beyond print literacy and encompass the digital literacies which are increasingly central to learners' personal, social, educational and professional lives. By situating these digital literacies within a clear theoretical framework, this book provides educators and students alike with not just the background for a deeper understanding of these key 21st-century skills, but also the rationale for integrating these skills into classroom practice. This is the first methodology book to address not jus

  20. Nonlinear interaction analysis of RC cylindrical tank with subsoil by adopting two kinds of constitutive models for ground and structure

    Lewiński, Paweł M.; Dudziak, Sławomir

    2018-01-01

    In the paper, two kinds of constitutive models for ground and structure were adopted for the nonlinear interaction analysis of the RC cylindrical tank with subsoil. The paper discusses deformational and incremental approaches to a nonlinear FE analysis of soil-structure interaction including the description of behaviour of the RC structure and the subsoil under short-term loading. Moreover, a non-linear elastic-brittle-plastic analysis of RC axisymmetric structures using finite element iterative techniques is presented. The constitutive laws for concrete and subsoil are developed in compliance with the deformational and plastic flow theories of plasticity. Two examples of an FE analysis of soil-structure interaction were performed and the results were analysed.

  1. A comparative mathematical analysis of RL and RC electrical circuits via Atangana-Baleanu and Caputo-Fabrizio fractional derivatives

    Abro, Kashif Ali; Memon, Anwar Ahmed; Uqaili, Muhammad Aslam

    2018-03-01

    This research article is analyzed for the comparative study of RL and RC electrical circuits by employing newly presented Atangana-Baleanu and Caputo-Fabrizio fractional derivatives. The governing ordinary differential equations of RL and RC electrical circuits have been fractionalized in terms of fractional operators in the range of 0 ≤ ξ ≤ 1 and 0 ≤ η ≤ 1. The analytic solutions of fractional differential equations for RL and RC electrical circuits have been solved by using the Laplace transform with its inversions. General solutions have been investigated for periodic and exponential sources by implementing the Atangana-Baleanu and Caputo-Fabrizio fractional operators separately. The investigated solutions have been expressed in terms of simple elementary functions with convolution product. On the basis of newly fractional derivatives with and without singular kernel, the voltage and current have interesting behavior with several similarities and differences for the periodic and exponential sources.

  2. Results of the Ongoing Monitoring of the Position of a Geostationary Telecommunication Satellite by the Method of Spatially Separated Basis Receiving of Digital Satellite Television Signals

    Bushuev F.

    2016-10-01

    Full Text Available The results of the ongoing monitoring of the position of geostationary telecommunication satellite Eutelsat-13B (13° East are presented in the article. The results were obtained using a radio engineering complex (RC of four stations receiving digital satellite television and a data processing centre. The stations are located in Kyiv, Mukachevo, Kharkiv and Mykolaiv.

  3. Digital delicacies

    Holley, Rose

    2001-01-01

    This presentation outlines the purpose and work of the newly appointed Digital Projects Librarian at the University of Auckland. It gives a brief overview of what digitisation is, the benefits, the stages of a digitisation project and also samples of interesting international digitisation projects and new University of Auckland Library Digitisation projects.

  4. Digital Forensics

    Harron, Jason; Langdon, John; Gonzalez, Jennifer; Cater, Scott

    2017-01-01

    The term forensic science may evoke thoughts of blood-spatter analysis, DNA testing, and identifying molds, spores, and larvae. A growing part of this field, however, is that of digital forensics, involving techniques with clear connections to math and physics. This article describes a five-part project involving smartphones and the investigation…

  5. Digital Disruption

    Rosenstand, Claus Andreas Foss

    det digitale domæne ud over det niveau, der kendetegner den nuværende debat, så præsenteres der ny viden om digital disruption. Som noget nyt udlægges Clayton Christens teori om disruptiv innovation med et særligt fokus på små organisationers mulighed for eksponentiel vækst. Specielt udfoldes...... forholdet mellem disruption og den stadig accelererende digitale udvikling i konturerne til ny teoridannelse om digital disruption. Bogens undertitel ”faretruende og fascinerende forandringer” peger på, at der er behov for en nuanceret debat om digital disruption i modsætning til den tone, der er slået an i...... videre kalder et ”disruption-råd”. Faktisk er rådet skrevet ind i 2016 regeringsgrundlaget for VLK-regeringen. Disruption af organisationer er ikke et nyt fænomen; men hastigheden, hvormed det sker, er stadig accelererende. Årsagen er den globale mega-trend: Digitalisering. Og derfor er specielt digital...

  6. Digital books.

    Wink, Diane M

    2011-01-01

    In this bimonthly series, the author examines how nurse educators can use the Internet and Web-based computer technologies such as search, communication, and collaborative writing tools; social networking and social bookmarking sites; virtual worlds; and Web-based teaching and learning programs. This article describes digital books.

  7. Digital forvaltning

    Remmen, Arne; Larsen, Torben; Mosgaard, Mette

    2004-01-01

    Større effektivitet, bedre service og mere demokrai er blot nogle af forventningerne til indførelse af digital forveltning i kommunerne. Kapitlet giver bland andet svar på spørgsmålene : Hvordan lever kommunerne op hertil i dagligdagen? hvilke virkemidler anvender de? Hvilke barrierer har der været...

  8. Digital Methods

    Rogers, R.

    2013-01-01

    In Digital Methods, Richard Rogers proposes a methodological outlook for social and cultural scholarly research on the Web that seeks to move Internet research beyond the study of online culture. It is not a toolkit for Internet research, or operating instructions for a software package; it deals

  9. Molecular insight into γ-γ tubulin lateral interactions within the γ-tubulin ring complex (γ-TuRC)

    Suri, Charu; Hendrickson, Triscia W.; Joshi, Harish C.; Naik, Pradeep Kumar

    2014-09-01

    γ-tubulin is essential for the nucleation and organization of mitotic microtubules in dividing cells. It is localized at the microtubule organizing centers and mitotic spindle fibres. The most well accepted hypothesis for the initiation of microtubule polymerization is that α/β-tubulin dimers add onto a γ-tubulin ring complex (γTuRC), in which adjacent γ-tubulin subunits bind to the underlying non-tubulin components of the γTuRC. This template thus determines the resulting microtubule lattice. In this study we use molecular modelling and molecular dynamics simulations, combined with computational MM-PBSA/MM-GBSA methods, to determine the extent of the lateral atomic interaction between two adjacent γ-tubulins within the γTuRC. To do this we simulated a γ-γ homodimer for 10 ns and calculated the ensemble average of binding free energies of -107.76 kcal/mol by the MM-PBSA method and of -87.12 kcal/mol by the MM-GBSA method. These highly favourable binding free energy values imply robust lateral interactions between adjacent γ-tubulin subunits in addition to their end-interactions longitudinally with other proteins of γTuRC. Although the functional reconstitution of γ-TuRC subunits and their stepwise in vitro assembly from purified components is not yet feasible, we nevertheless wanted to recognize hotspot amino acids responsible for key γ-γ interactions. Our free energy decomposition data from converting a compendium of amino acid residues identified an array of hotspot amino acids. A subset of such mutants can be expressed in vivo in living yeast. Because γTuRC is important for the growth of yeast, we could test whether this subset of the hotspot mutations support growth of yeast. Consistent with our model, γ-tubulin mutants that fall into our identified hotspot do not support yeast growth.

  10. Identification of an Equivalent Linear Model for a Non-Linear Time-Variant RC-Structure

    Kirkegaard, Poul Henning; Andersen, P.; Brincker, Rune

    are investigated and compared with ARMAX models used on a running window. The techniques are evaluated using simulated data generated by the non-linear finite element program SARCOF modeling a 10-storey 3-bay concrete structure subjected to amplitude modulated Gaussian white noise filtered through a Kanai......This paper considers estimation of the maximum softening for a RC-structure subjected to earthquake excitation. The so-called Maximum Softening damage indicator relates the global damage state of the RC-structure to the relative decrease of the fundamental eigenfrequency in an equivalent linear...

  11. An implementation of super-encryption using RC4A and MDTM cipher algorithms for securing PDF Files on android

    Budiman, M. A.; Rachmawati, D.; Parlindungan, M. R.

    2018-03-01

    MDTM is a classical symmetric cryptographic algorithm. As with other classical algorithms, the MDTM Cipher algorithm is easy to implement but it is less secure compared to modern symmetric algorithms. In order to make it more secure, a stream cipher RC4A is added and thus the cryptosystem becomes super encryption. In this process, plaintexts derived from PDFs are firstly encrypted with the MDTM Cipher algorithm and are encrypted once more with the RC4A algorithm. The test results show that the value of complexity is Θ(n2) and the running time is linearly directly proportional to the length of plaintext characters and the keys entered.

  12. Preloading Effect on Strengthening Efficiency of RC Beams Strengthened with Non- and Pretensioned NSM Strips

    Renata Kotynia

    2018-02-01

    Full Text Available The near surface mounted (NSM technique has been shown to be one of the most promising methods for upgrading reinforced concrete (RC structures. Many tests carried out on RC members strengthened in flexure with NSM fiber-reinforced polymer (FRP systems have demonstrated greater strengthening efficiency than the use of externally-bonded (EB FRP laminates. Strengthening with simultaneous pretensioning of the FRP results in improvements in the serviceability limit state (SLS conditions, including the increased cracking moment and decreased deflections. The objective of the reported experimental program, which consisted of two series of RC beams strengthened in flexure with NSM CFRP strips, was to investigate the influence of a number of parameters on the strengthening efficiency. The test program focused on an analysis of the effects of preloading on the strengthening efficiency which has been investigated very rarely despite being one of the most important parameters to be taken into account in strengthening design. Two preloading levels were considered: the beam self-weight only, which corresponded to stresses on the internal longitudinal reinforcement of 25% and 14% of the yield stress (depending on a steel reinforcement ratio, and the self-weight with the additional superimposed load, corresponding to 60% of the yield strength of the unstrengthened beam and a deflection equal to the allowable deflection at the SLS. The influence of the longitudinal steel reinforcement ratio was also considered in this study. To reflect the variability seen in existing structures, test specimens were varied by using different steel bar diameters. Finally, the impact of the composite reinforcement ratio and the number of pretensioned FRP strips was considered. Specimens were divided into two series based on their strengthening configuration: series “A” were strengthened with one pretensioned and two non-pretensioned carbon FRP (CFRP strips, while series

  13. A study of digital hardware architectures for nuclear reactors protection systems applications - reliability and safety analysis methods; Um estudo de arquiteturas de hardware para aplicacao em sistemas digitais de protecao de reatores nucleares - metodos de analise de confiabilidade e seguranca

    Benko, Pedro Luiz

    1997-07-01

    A study of digital hardware architectures, including experience in many countries, topologies and solutions to interface circuits for protection systems of nuclear reactors is presented. Methods for developing digital systems architectures based on fault tolerant and safety requirements is proposed. Directives for assessing such conditions are suggested. Techniques and the most common tools employed in reliability, safety evaluation and modeling of hardware architectures is also presented. Markov chain modeling is used to evaluate the reliability of redundant architectures. In order to estimate software quality, several mechanisms to be used in design, specification, and validation and verification (V and V) procedures are suggested. A digital protection system architecture has been analyzed as a case study. (author)

  14. Objeto educacional digital: avaliação da ferramenta para prática de ensino em enfermagem Objeto educacional digital: evaluación de la herramienta para la práctica de enseñanza de la enfermería Digital learning objects: an assessment of a tool for the practice of nursing education

    Raquel Yurika Tanaka

    2010-10-01

    Full Text Available OBJETIVO: Descrever as opiniões de estudantes quanto ao uso da tecnologia, as práticas educacionais vivenciadas, o suporte ao educando e os resultados atingidos na aprendizagem por meio de ambiente virtual. MÉTODOS: Trata-se de um estudo exploratório descritivo com abordagem quantitativa realizado em uma Escola de Enfermagem, com a participação de 43 alunos da disciplina de Fundamentos do Cuidado Humano I que responderam a um questionário, avaliando o processo empregado. RESULTADOS: Os dados apontaram que a avaliação da atividade proposta sobre os sinais vitais, mediada por computador teve concordância positiva quanto ao uso da tecnologia, das práticas educacionais vivenciadas, do suporte ao educando e dos resultados atingidos na aprendizagem por meio do ambiente virtual. CONCLUSÃO: A proposta dinamizou o ensino presencial e proporcionou o desenvolvimento de habilidades na área da informática e na metodologia de resolução de problemas.OBJETIVO: Describir las opiniones de estudiantes en lo que se refiere al uso de la tecnología, de las prácticas educacionales experimentadas, del soporte al educando y de los resultados alcanzados en el aprendizaje, por medio del ambiente virtual. MÉTODOS: Se trata de un estudio exploratorio y descriptivo con abordaje cuantitativo realizado en una Escuela de Enfermería, con la participación de 43 alumnos de la disciplina de Fundamentos del Cuidado Humano I que respondieron a un cuestionario, evaluando el proceso empleado. RESULTADOS: Los datos apuntaron que la evaluación de la actividad propuesta sobre las señales vitales, utilizando un computador, obtuvo una concordancia positiva en lo que se refiere al uso de la tecnología, de las prácticas educacionales experimentadas, del soporte al educando y de los resultados alcanzados, en el aprendizaje por medio del ambiente virtual. CONCLUSIÓN: La propuesta dinamizó la enseñanza presencial y proporcionó el desarrollo de habilidades en el

  15. Performance of a multi-section ICRF array for a RTO/RC ITER

    Bosia, Giuseppe; Brambilla, Marco

    1999-01-01

    In an RTO/RC ITER, the Ion Cyclotron (IC) Heating and Current Drive System would need to operate at a power density of 6.5 MW/m 2 , (or about twice the design value adopted in the ITER Final Design Report), in order to provide the required total power output of 40 MW of RF power from two equatorial ports. A significant upgrade of the original IC array design is necessary, in order to keep the operating RF voltage at the plasma interface within acceptable limits. This is in principle possible by increasing the number of array elements and by operating them in parallel. In the paper the prospects of this modifications and the implications on the array layout are discussed

  16. Calibrating and validating a FE model for long-term behavior of RC beams

    Tošić Nikola D.

    2014-01-01

    Full Text Available This study presents the research carried out in finding an optimal finite element (FE model for calculating the long-term behavior of reinforced concrete (RC beams. A multi-purpose finite element software DIANA was used. A benchmark test in the form of a simply supported beam loaded in four point bending was selected for model calibration. The result was the choice of 3-node beam elements, a multi-directional fixed crack model with constant stress cut-off, nonlinear tension softening and constant shear retention and a creep and shrinkage model according to CEB-FIP Model Code 1990. The model was then validated on 14 simply supported beams and 6 continuous beams. Good agreement was found with experimental results (within ±15%.

  17. Comparative Application of Capacity Models for Seismic Vulnerability Evaluation of Existing RC Structures

    Faella, C.; Lima, C.; Martinelli, E.; Nigro, E.

    2008-01-01

    Seismic vulnerability assessment of existing buildings is one of the most common tasks in which Structural Engineers are currently engaged. Since, its is often a preliminary step to approach the issue of how to retrofit non-seismic designed and detailed structures, it plays a key role in the successful choice of the most suitable strengthening technique. In this framework, the basic information for both seismic assessment and retrofitting is related to the formulation of capacity models for structural members. Plenty of proposals, often contradictory under the quantitative standpoint, are currently available within the technical and scientific literature for defining the structural capacity in terms of force and displacements, possibly with reference to different parameters representing the seismic response. The present paper shortly reviews some of the models for capacity of RC members and compare them with reference to two case studies assumed as representative of a wide class of existing buildings

  18. A Plastic Design Method for RC Moment Frame Buildings against Progressive Collapse

    Hadi Faghihmaleki

    2017-04-01

    Full Text Available In this study, progressive collapse potential of generic 3-, 8- and 12-storey RC moment frame buildings designed based on IBC-2006 code was investigated by performing non-linear static and dynamic analyses. It was observed that the model structures had high potential for progressive collapse when the second floor column was suddenly removed. Then, the size of beams required to satisfy the failure criteria for progressive collapse was obtained by using the virtual work method; i.e., using the equilibrium of the external work done by gravity load due to loss of a column and the internal work done by plastic rotation of beams. According to the nonlinear dynamic analysis results, the model structures designed only for normal load turned out to have strong potential for progressive collapse whereas the structures designed by plastic design concept for progressive collapse satisfied the failure criterion recommended by the GSA code. 

  19. BUTREN-RC an hybrid system for the recharges optimization of nuclear fuels in a BWR

    Ortiz S, J.J.; Castillo M, J.A.; Valle G, E. del

    2004-01-01

    The obtained results with the hybrid system BUTREN-RC are presented that obtains recharges of nuclear fuel for a BWR type reactor. The system has implemented the methods of optimization heuristic taboo search and neural networks. The optimization it carried out with the technique of taboo search, and the neural networks, previously trained, were used to predict the behavior of the recharges of fuel, in substitution of commercial codes of reactor simulation. The obtained recharges of nuclear fuel correspond to 5 different operation cycles of the Laguna Verde Nuclear Power plant, Veracruz in Mexico. The obtained results were compared with the designs of this cycles. The energy gain with the recharges of fuel proposals is of approximately 4.5% with respect to those of design. The time of compute consumed it was considerably smaller that when a commercial code for reactor simulation is used. (Author)

  20. Application of system-process-goal approach for description of TRIGA RC-1 system

    Gadomski, Adam M.

    1986-01-01

    The new methodology of the goal oriented description of an artificial system is presented. In the SPG approach (System-Process-Goal) it is assumed that the knowledge necessary for achieving the goal is available but it is not ordered or ordered for other purposes. The aim of SPG is to give the description of the analyzed system in form of network by decomposition of goal-system relationships using uniform and mathematical formalism. The SPG approach is useful to build a reactor operator aid system. This paper presents the conception of the application of the SPG approach to the decomposition of TRIGA RC-1 dynamics and for designing of TRIGA diagnostic algorithms. (author)

  1. Preliminary study of impact fragility to RC wall subjected to aircraft impact

    Shin, Sang Shup; Hahm, Dae Gi; Choi, In Kil

    2012-01-01

    International experience has shown that internal and external hazards such as fires, earthquakes, and aircraft impacts can be significant safety contributors to the risk to infrastructures such as nuclear power plants. Since the aircraft accident at the World Trade Center (WTC) on September 11, 2001, an aircraft impact problem has been increasingly of the interest and is one of important categories of an unexpected external hazard field. To date, aircraft impact analyses has most focused on the response analysis to the target structures. However, this preliminary study carried out an impact fragility analysis to reinforced concrete (RC) wall subjected to an aircraft impact. The aircraft velocity is used as the important variable of this study. The impact analysis of the applied Ri era's forcing function is used by Abaqus/Explicit

  2. FW/Blanket and vacuum vessel for RTO/RC ITER

    Ioki, K.; Barabash, V.; Cardella, A.; Elio, F.; Iida, H.; Johnson, G.; Kalinin, G.; Miki, N.; Onozuka, M.; Sannazzaro, G.; Utin, Y.; Yamada, M.

    2000-01-01

    The design has progressed on the vacuum vessel and First Wall (FW)/blanket for the Reduced Technical Objective/Reduced Cost (RTO/RC) ITER. The basic functions and structures are the same as for the 1998 ITER design. The design has been improved to achieve, along with the size reduction, ∼50% target reduction of the fabrication cost. The number of blanket modules has been minimized according to smaller dimensions of the machine and a higher payload capacity of the blanket Remote Handling tool. A concept without the back plate has been designed and assessed. The blanket module concept with flat separable FW panels has been developed to reduce the fabrication cost and future radioactive waste

  3. Response Analysis of an RC Cooling Tower Under Seismic and Windstorm Effects

    D. Makovička

    2006-01-01

    Full Text Available The paper compares the RC structure of a cooling tower unit under seismic loads and under strong wind loads. The calculated values of the envelopes of the displacements and the internal forces due to seismic loading states are compared with the envelopes of the loading states due to the dead, operational and live loads, wind and temperature actions. The seismic effect takes into account the seismic area of ground motion 0.3 g and the ductility properties of a relatively rigid structure. The ductility is assessed as the reduction in seismic load. In this case the actions of wind pressure are higher than the seismicity effect under ductility correction. The seismic effects, taking into account the ductility properties of the structure, are lower than the actions of the wind pressure. The other static loads, especially temperature action due to the environment and surface insulation are very important for the design of the structure. 

  4. FW/Blanket and vacuum vessel for RTO/RC ITER

    Ioki, K. E-mail: iokik@itereu.de; Barabash, V.; Cardella, A.; Elio, F.; Iida, H.; Johnson, G.; Kalinin, G.; Miki, N.; Onozuka, M.; Sannazzaro, G.; Utin, Y.; Yamada, M

    2000-11-01

    The design has progressed on the vacuum vessel and First Wall (FW)/blanket for the Reduced Technical Objective/Reduced Cost (RTO/RC) ITER. The basic functions and structures are the same as for the 1998 ITER design. The design has been improved to achieve, along with the size reduction, {approx}50% target reduction of the fabrication cost. The number of blanket modules has been minimized according to smaller dimensions of the machine and a higher payload capacity of the blanket Remote Handling tool. A concept without the back plate has been designed and assessed. The blanket module concept with flat separable FW panels has been developed to reduce the fabrication cost and future radioactive waste.

  5. Bonding techniques for flexural strengthening of R.C. beams using CFRP laminates

    Alaa Morsy

    2013-09-01

    Full Text Available This paper presents an experimental study of an alternative method of attaching FRP laminates to reinforced concrete beams by the way of fasting steel rivets through the FRP laminate and concrete substrate. Five full scale R.C. beams were casted and strengthened in flexural using FRP laminate bonded with conventional epoxy and compared with other beams strengthened with FRP laminate and bonded with fastener “steel rivets” of 50 mm length and 10 mm diameter. Based on experimental evidence the beam strengthened with conventional bonding methods failed due to de-bonding with about 13% increase over the un-strengthened beam. On the other hand, the beams strengthened with FRP laminate and bonded by four steel fastener rivets only failed by de-bonding also but at higher flexural capacity with increase 19% over the un-strengthened beam.

  6. Smart aggregate based damage detection of circular RC columns under cyclic combined loading

    Moslehy, Yashar; Belarbi, Abdeldjelil; Mo, Y L; Gu, Haichang; Song, Gangbing

    2010-01-01

    Structural health monitoring is an important issue for the maintenance of large-scale civil infrastructures, especially for bridge columns. In this paper, an innovative piezoceramic-based approach is developed for the structural health monitoring of reinforced concrete columns. An innovative piezoceramic-based device, the smart aggregate, is utilized as a transducer for the purpose of health monitoring. To investigate the seismic behavior of reinforced concrete (RC) bridge columns, structural health monitoring tests were performed on two bridge columns under combined reversed cyclic loading at the Missouri University of Science and Technology. The proposed smart aggregate based approach successfully evaluated the health status of concrete columns during the loading procedure. Sensor energy plots and 3D normalized sensor energy plots demonstrated that the damage inside attenuated the transmitted energy. The wavelet packet based damage index and sensor history damage index evaluate the damage development in concrete columns under cyclic loading

  7. Lateral stiffness and vibration characteristics of composite plated RC shear walls with variable fibres spacing

    Meftah, S.A.; Yeghnem, R.; Tounsi, A.; Adda Bedia, E.A.

    2008-01-01

    In this paper, a finite element model for static and free vibration analysis of reinforced concrete (RC) shear walls structures strengthened with thin composite plates having variable fibres spacing is presented. An efficient analysis method that can be used regardless to the sizes and location of the bonded plates is proposed in this study. In the numerical formulation, the adherents and the adhesives are all modelled as shear wall elements, using the mixed finite element method. Several test problems are examined to demonstrate the accuracy and effectiveness of the proposed method. Numerical results are obtained for six nonuniform distributions of E-glass, graphite and boron fibres in epoxy matrices. The fibre redistributions of the bonded plates are seen to increase the frequencies modes and reduce substantially the lateral displacements

  8. Active RC filter based implementation analysis part of two channel hybrid filter bank

    Stojanović Vidosav

    2014-01-01

    Full Text Available In the present paper, a new design method for continuous-time powersymmetric active RC filters for Hybrid Filter Bank (HFB is proposed. Some theoretical properties of continious-time power-symmetric filters bank in a more general perspective are studied. This includes the derivation of a new general analytical form, and a study of poles and zeros locations in s-plane. In the proposed design method the analytic solution of filter coefficients is solved in sdomain using only one nonlinear equation Finally, the proposed approximation is compared to standard approximations. It was shown that attenuation and group delay characteristic of the proposed filter lie between Butterworth and elliptic characteristics. [Projekat Ministarstva nauke Republike Srbije, br. 32009TR

  9. Intestinal toxicity of deoxynivalenol is limited by Lactobacillus rhamnosus RC007 in pig jejunum explants.

    García, Gisela Romina; Payros, Delphine; Pinton, Philippe; Dogi, Cecilia Ana; Laffitte, Joëlle; Neves, Manon; González Pereyra, María Laura; Cavaglieri, Lilia Renée; Oswald, Isabelle P

    2018-02-01

    Probiotics have been explored to stimulate gut health in weaned pigs, when they started to consume solid diet where mycotoxins could be present. The aim of this study was to evaluate the effect of Lactobacillus rhamnosus RC007 on the intestinal toxicity of deoxynivalenol (DON) in an ex vivo model. Jejunal explants, obtained from 5-week-old crossbred castrated male piglets, were kept as control, exposed for 3 h to 10 μM DON, incubated for 4 h with 10 9 CFU/mL L. rhamnosus, or pre-incubated 1 h with 10 9 L. rhamnosus and exposed to DON. Histological lesions were observed, para- and transcellular intestinal permeability was measured in Ussing chambers. The expression levels of mRNA encoding six inflammatory cytokines (CCL20, IL-10, IL-1β, TNFα, IL-8 and IL-22) were determined by RT-PCR. The expressions of the phosphorylated MAP kinases p42/p44 and p38 were assessed by immunoblotting. Exposure to DON induced histological changes, significantly increased the expression of CCL20, IL-1β, TNFα, IL-8, IL-22 and IL-10, increased the intestinal paracellular permeability and activated MAP kinases. Incubation with L. rhamnosus alone did not have any significant effect. By contrast, the pre-incubation with L. rhamnosus reduced all the effects of DON: the histological alterations, the pro-inflammatory response, the paracellular permeability and the phosphorylation of MAP kinases. Of note, L. rhamnosus did not adsorb DON and only slightly degrade the toxin. In conclusion, L. rhamnosus RC007 is a promising probiotic which, included as feed additive, can decrease the intestinal toxicity of DON.

  10. Evaluation method for corrosion level of rebar in RC with electrical impedance measurement

    Sasamoto, Akira

    2018-04-01

    The author reported that the impedance measurement using the 4-terminal method on the RC surface for diagnosing corrosion of internal rebar. The difference between the maximum value at 0.01 Hz and the minimum value around 10 Hz indicates the corrosion level of rebar in that report. This is successive report on a signal processing method for estimating the corrosion level by the measured impedance data to obtain more high accuracy. In the dielectric, a graph of frequency and dielectric constant (Cole-Cole plot diagram by KS Cole and RH Cole article of 1941) draws a shape of circle if the dielectric is independent of frequency but it draws a shape of ellipse in reality due to frequency dependency. Havriliak and Negami have also presented Havriliak-Negami model which introduced parameter into dielectric constant equation which deforms Cole-Cole plot diagram and showed that acquired dielectric data of polymer materials fit to this model with proper parameters. In this report, we first consider electric model connected with resistance and capacitance as a rough model of RC concrete. If the capacitance in this model circuit has some loss of dielectric, it is stated that graph in impedance plot is expected to take as similar deformation in the dielectric Cole-Cole plot. Then a numerical optimization computer code for obtaining parameters in the Cole-Cole plot diagram and Havriliak-Negami model is constructed, and the correlation between the deformation parameter of each model and corrosion is shown by this code. These results are feasibility study for diagnosis of corrosion level of rebar by associated parameters to a shape of impedance graph.

  11. Seismic design and performance of nuclear safety related RC structures based on new seismic design principle

    Murugan, R.; Sivathanu Pillai, C.; Chattopadhyaya, S.; Sundaramurthy, C.

    2011-01-01

    Full text: Seismic design of safety related Reinforced Concrete (RC) structures of Nuclear power plants (NPP) in India as per the present AERB codal procedures tries to ensure predominantly elastic behaviour under OBE so that the features of Nuclear Power Plant (NPP) necessary for continued safe operation are designed to remain functional and prevent accident (collapse) of NPP under SSE for which certain Structures, Systems and Components (SSCs) those are necessary to ensure the capability to shut down the reactor safely, are designed to remain functional. While the seismic design principles of non safety related structures as per Indian code (IS 1893-2002) are ensuring elastic behaviour under DBE and inelastic behaviour under MCE by utilizing ductility and energy dissipation capacity of the structure effectively. The design principle of AERB code is ensuring elastic behaviour under OBE and is not enlightening much inference about the overall structural behaviour under SSE (only ensuring the capability of certain SSCs required for safe shutdown of reactor). Various buildings and structures of Indian Nuclear power plant are classified from the basis of associated safety functions in a descending order in according with their roles in preventions and mitigation of an accident or support functions for prevention. This paper covers a comprehensive seismic analysis and design methodology based on the AERB codal provisions followed for safety related RC structure taking Diesel Generator Building of PFBR as a case study and study and investigates its performance under OBE and SSE by carrying out Non-linear static Pushover analysis. Based on the analysis, observed variations, recommendations are given for getting the desired performance level so as to implement performance based design in the future NPP design

  12. Digital Humanities and networked digital media

    Finnemann, Niels Ole

    2014-01-01

    This article discusses digital humanities and the growing diversity of digital media, digital materials and digital methods. The first section describes the humanities computing tradition formed around the interpretation of computation as a rule-based process connected to a concept of digital...... materials centred on the digitisation of non-digital, finite works, corpora and oeuvres. The second section discusses “the big tent” of contemporary digital humanities. It is argued that there can be no unifying interpretation of digital humanities above the level of studying digital materials with the help...... of software-supported methods. This is so, in part, because of the complexity of the world and, in part, because digital media remain open to the projection of new epistemologies onto the functional architecture of these media. The third section discusses the heterogeneous character of digital materials...

  13. Digital Materia

    Lindgren, Marcus; Richey, Emma

    2014-01-01

    Med tankar från pedagogen Montessori och filosoferna Platon och Baudrillard har detta arbete behandlat frågor om datorn och dess betydelse för en grafiker. Frågeställningen formulerades efter hand och lydde tillslut: ”Hur kan materia te sig i digital form?” Forskningen resulterade i en hypotes för hur digital materia skulle födas i datorn: genom att blanda två uppsättningar av data, såsom två genuppsättningar tillsammans skapar en ny organism. Under produktionen utvecklades därmed en metod fö...

  14. Becoming digital

    Pors, Anja Svejgaard

    2015-01-01

    government, and draws on empirical material generated through observations, field notes, interviews and policy documents. The material is documenting how service is performed by frontline agents in the ‘bureaucratic encounter’ with citizens, who needs assistance to use digital self-service in order to apply...... online for a public benefit. Findings: The paper shows that e-government technology changes the mode of professionalism in citizen service from service to support. The paper gives an empirical account of recent Danish digital reforms and shows how the reforms both enable and constrain the work...... of ‘becoming digital’ by frontline agents. Overall the street-level bureaucrat’s classical tasks such as specialized casework are being displaced into promoting and educational tasks. An implication of this is blurred distinctions between professional skills and personal competences of the frontline agent...

  15. Digital resources

    Redazione Reti Medievali (a cura di

    2005-12-01

    Full Text Available Bibliotheca Latinitatis Mediaevalis (circa VII sec. - XIV sec. IntraText Digital Library [01/06] Corpus Scriptorum Latinorum. A digital library of Latin literature by David Camden [01/06] Fonti disponibili online concernenti la vita religiosa medievale Rete Vitae Religiosae Mediaevalis Studia Conectens [01/06] Fuentes del Medievo Hispanico Instituto de Historia, Consejo Superior de Investigaciones Científicas [01/06] Latin Literature Forum Romanum [01/06] Ludovico Antonio Muratori, Dissertazioni sopra le antichità italiane, 1751 Biblioteca dei Classici Italiani di Giuseppe Bonghi [01/06] Medieval Latin The Latin Library [01/06] Médiévales Presses Universitaires de Vincennes - Revues.org [01/06] Regesta imperii Deutsche Kommission für die Bearbeitung der Regesta Imperii e.V. [01/06] Suda On Line Byzantine Lexicography [01/06

  16. Evaluation of respiration-correlated digital tomosynthesis in lung.

    Santoro, Joseph; Kriminski, Sergey; Lovelock, D Michael; Rosenzweig, Kenneth; Mostafavi, Hassan; Amols, Howard I; Mageras, Gig S

    2010-03-01

    Digital tomosynthesis (DTS) with a linear accelerator-mounted imaging system provides a means of reconstructing tomographic images from radiographic projections over a limited gantry arc, thus requiring only a few seconds to acquire. Its application in the thorax, however, often results in blurred images from respiration-induced motion. This work evaluates the feasibility of respiration-correlated (RC) DTS for soft-tissue visualization and patient positioning. Image data acquired with a gantry-mounted kilovoltage imaging system while recording respiration were retrospectively analyzed from patients receiving radiotherapy for non-small-cell lung carcinoma. Projection images spanning an approximately 30 degrees gantry arc were sorted into four respiration phase bins prior to DTS reconstruction, which uses a backprojection, followed by a procedure to suppress structures above and below the reconstruction plane of interest. The DTS images were reconstructed in planes at different depths through the patient and normal to a user-selected angle close to the center of the arc. The localization accuracy of RC-DTS was assessed via a comparison with CBCT. Evaluation of RC-DTS in eight tumors shows visible reduction in image blur caused by the respiratory motion. It also allows the visualization of tumor motion extent. The best image quality is achieved at the end-exhalation phase of the respiratory motion. Comparison of RC-DTS with respiration-correlated cone-beam CT in determining tumor position, motion extent and displacement between treatment sessions shows agreement in most cases within 2-3 mm, comparable in magnitude to the intraobserver repeatability of the measurement. These results suggest the method's applicability for soft-tissue image guidance in lung, but must be confirmed with further studies in larger numbers of patients.

  17. Digital teenagers

    Rafael Conde Melguizo

    2011-12-01

    Full Text Available Espín, Manuel (Coord.(2011 Adolescentes Digitales.  Revista Estudios de Juventud, Nº 92. Marzo 2011. INJUVE, Madrid."Adolescentes digitales" se nos muestra como una obra que pretende explorar desde distintos puntos de vista la realidad de la generación conocida como “nativos digitales” (Prensky, la generación actual de adolescentes que ha crecido con internet y el mundo digital como su entorno normal de socialización.

  18. Digital Flora

    Bunnell, Katie

    2007-01-01

    This research is concerned with developing a new business model for flexible small scale ceramic production that exploits the customisation capabilities of digital manufacturing technologies and the market potential and global connectivity of the world wide web. It is arguably of particular relevance to regional economic development in remote areas (Amin, Tomaney, Sabel) such as Cornwall where there is a culture of high quality small scale production, limited market and manufacturing opportun...

  19. RC-IAL: linhagem celular contínua de rim de coelho - características e substrato para replicação de vírus RC-IAL: rabbit kidney cell line - characteristics and substrate for viral multiplication

    Aurea Silveira Cruz

    1992-12-01

    Full Text Available Uma linhagem celular de rim de coelho (denominada RC-IAL, que foi isolada em 1976, e que atualmente está na 150ª passagem, teve suas características analisadas. As células apresentaram morfologia semelhante aos fibroblastos desde o início de seu cultivo. A proporção de crescimento celular não se alterou desde seu isolamento, com uma eficiência de clonagem ao redor de 9%. A linhagem mostrou crescimento dependente de ancoragem, e a análise cromossômica apresentou o número modal da espécie com pequenas variações para mais ou menos um cromossomo, resultando uma somatória de 50%. Sua espécie de origem foi comprovada através da reação de imunofluorescência indireta e a susceptibilidade da linhagem a alguns vírus, com demonstração do efeito citopático, foi verificada com os vírus da vacínia, cowpox, herpes simples tipo 1 e 2 e da rubéola. Esse substrato celular está livre de contaminantes, satisfazendo assim, as condições para seu uso em trabalhos científicos, principalmente os relacionadas à saúde pública.A rabbit kidney cell line RC-IAL, isolated in 1976 and at apresent at 150ª passage, has had its characteristics analysed. The cells presented morphology similar to fibroblasto throughout their culture. The cellular growth proportion remained unaltered from its isolation, with a cloning efficiency of around 9%. The line showed growth dependent on anchorage and chromosomic analysis presented the modal number of the species with small variations to about one chromosome, to a total of about 50%. The line's species of origin was confirmed through indirect imunofluorescence reaction and susceptibility to some viruses with cytopatic effect was verified with vaccinia, cowpox, herpes simplex types 1 and 2 and rubella viruses. This cellular substract is free from contaminating agents, thus satisfying the conditions for its use in scientific work, especially that relating to public health.

  20. Radiography and digital image processing for detection of internal breakdown in fruits of mango tree (Mangifera indica L.); Radiografia e processamento de imagens na deteccao de disturbios fisiologicos internos em frutos da mangueira (Mangifera indica L.)

    Ferreira, Rubemar de Souza

    2004-01-15

    This work proposes a methodology aimed to be an adviser system for detection of internal breakdown in mangoes during the post-harvest phase to packinghouses. It was arranged a set-up to product digital images from X-ray spectrum in the range of 18 and 20 keV, where the primary images acquired were tested by a digital image processing routine for differentiation of seed, pulp, peel and injured zones. The analysis ROC applied to a only cut on a sample of 114 primary images generated, showed that digital image processing routine was able to identify 88% of true-positive injuries and 7% of false-negatives. When tested against the absence of injuries, the DIP routine had identified 22 % of false-positives and 88% of true-negatives. Besides, a cognitive analysis was applied to a sample of 76 digital images of mangoes. Results showed that the images offer enough information for dichotomic interpretation about the main injuries in the fruit, including those of difficult diagnosis under destructive assay. Measurements of observer agreement, performed on the same group of readers showed themselves in the range of fair and substantial strength of agreement. (author)

  1. Final Report for SERDP Project RC-1649: Advanced Chemical Measurements of Smoke from DoD-prescribed Burns

    T.J. Johnson; R.J. Yokelson; S.K. Akagi; I.R. Burling; D.R. Weise; S.P. Urbanski; C.E. Stockwell; J. Reardon; E.N. Lincoln; L.T.M. Profeta; A. Mendoza; M.D.W. Schneider; R.L. Sams; S.D. Williams; C.E. Wold; D.W.T. Griffith; M. Cameron; J.B. Gilman; C. Warneke; J.M. Roberts; P. Veres; W.C. Kuster; J de Gouw

    2014-01-01

    Project RC-1649, "Advanced Chemical Measurement of Smoke from DoD-prescribed Burns" was undertaken to use advanced instrumental techniques to study in detail the particulate and vapor-phase chemical composition of the smoke that results from prescribed fires used as a land management tool on DoD bases, particularly bases in the southeastern U.S. The statement...

  2. Seismic reliability assessment of RC structures including soil–structure interaction using wavelet weighted least squares support vector machine

    Khatibinia, Mohsen; Javad Fadaee, Mohammad; Salajegheh, Javad; Salajegheh, Eysa

    2013-01-01

    An efficient metamodeling framework in conjunction with the Monte-Carlo Simulation (MCS) is introduced to reduce the computational cost in seismic reliability assessment of existing RC structures. In order to achieve this purpose, the metamodel is designed by combining weighted least squares support vector machine (WLS-SVM) and a wavelet kernel function, called wavelet weighted least squares support vector machine (WWLS-SVM). In this study, the seismic reliability assessment of existing RC structures with consideration of soil–structure interaction (SSI) effects is investigated in accordance with Performance-Based Design (PBD). This study aims to incorporate the acceptable performance levels of PBD into reliability theory for comparing the obtained annual probability of non-performance with the target values for each performance level. The MCS method as the most reliable method is utilized to estimate the annual probability of failure associated with a given performance level in this study. In WWLS-SVM-based MCS, the structural seismic responses are accurately predicted by WWLS-SVM for reducing the computational cost. To show the efficiency and robustness of the proposed metamodel, two RC structures are studied. Numerical results demonstrate the efficiency and computational advantages of the proposed metamodel for the seismic reliability assessment of structures. Furthermore, the consideration of the SSI effects in the seismic reliability assessment of existing RC structures is compared to the fixed base model. It shows which SSI has the significant influence on the seismic reliability assessment of structures.

  3. An Experimental Study on Hybrid Noncompression CF Bracing and GF Sheet Wrapping Reinforcement Method to Restore Damaged RC Structures

    Kang Seok Lee

    2015-01-01

    Full Text Available We describe a novel technique for restoration of reinforced concrete (RC structures that have sustained damage during an earthquake. The reinforcement scheme described here is a hybrid seismic retrofitting technique that combines noncompression X-bracing using CF with externally bonded GF sheets to strengthen RC structures that have sustained damage following an earthquake. The GF sheet is used to improve the ductility of columns, and the noncompression CF X-bracing system, which consists of CF bracing and anchors to replace the conventional steel bracing and bolt connections, is used to increase the lateral strength of the framing system. We report seismic restoration capacity, which enables reuse of the damaged RC frames via the hybrid CF X-bracing and GF sheet wrapping system. Cyclic loading tests were carried out to investigate hysteresis of the lateral load-drift relations, as well as the ductility. The GF sheet significantly improved the ductility of columns, resulting in a change in failure mode. The strengthening effect of conventional CF sheets used in columns is not sufficient with respect to lateral strength and stiffness. However, this study results in a significant increase in the strength of the structure due to the use of CF X-bracing and inhibited buckling failure of the bracing. This result can be exploited to develop guidelines for the application of the reinforcement system to restore damaged RC structures.

  4. Humidity build-up in electronic enclosures exposed to different geographical locations by RC modelling and reliability prediction

    Conseil-Gudla, H.; Staliulionis, Z.; Mohanty, S.

    2018-01-01

    according to this steady state (25 °C and 60% RH) have been calculated for the different climates, and the protection offered by the enclosures has been estimated under different casing materials and resistor-capacitor (RC) simulation. This method offers a way to predict the average value of failure rate...

  5. Seismic assessment of existing RC buildings under alternative ground motion ensembles compatible to EC8 and NTC 2008

    Tanganelli, Marco; Viti, Stefania; Mariani, V.; Pianigiani, Maria

    2017-01-01

    This work investigates the effects of the choice of different ensembles of ground motions on the seismic assessment of existing RC buildings through nonlinear dynamic analysis. Nowadays indeed, all the main International Seismic Codes provide a soil classification which is based on the shear wave

  6. A case of hyperkalemia after transfusion of irradiated red cell concentrate in mannitol-adenine-phosphate (RC-MAP)

    Fukui, Akira; Yokota, Kimio; Aoki, Masanori; Sari, Atsuo

    1998-01-01

    A 72-year-old male, 45 kg in weight, underwent anterior and posterior fixations of the lumbar vertebra. Preanesthetic blood chemistry was within normal range. Following transfusion of 400 ml of RC-MAP in two hours (11 days after blood collection and 2 days after irradiation at a dose of 20 Gy), and then another 100 ml of 400 ml RC-MAP (12 days after blood collection and 2 days after irradiation at a dose of 20 Gy), the patient's serum kalium value increased from 4.8 to 5.5 mEq/l. Even though the transfusion was immediately discontinued, the level continued to rise to 6.0 mEq/l. It subsequently fell to the normal level with glucose-insulin therapy. The hyperkalemia in this case could have been attributable to the period of storage after irradiation, the transfusion of salvaged autologous blood, and the storage state of RC-MAP. However, since the kalium values of RC-MAP and the salvaged autologous blood were not measured in this case, the exact cause was unknown. In conclusion, hyperkalemia can occur in patients during transfusion of irradiated blood. Therefore, kalium levels should be monitored carefully. (author)

  7. Time-variant flexural reliability of RC beams with externally bonded CFRP under combined fatigue-corrosion actions

    Bigaud, David; Ali, Osama

    2014-01-01

    Time-variant reliability analysis of RC highway bridges strengthened with carbon fibre reinforced polymer CFRP laminates under four possible competing damage modes (concrete crushing, steel rupture after yielding, CFRP rupture and FRP plate debonding) and three degradation factors is analyzed in terms of reliability index β using FORM. The first degradation factor is chloride-attack corrosion which induces reduction in steel area and concrete cover cracking at characteristic key times (corrosion initiation, severe surface cover cracking). The second degradation factor considered is fatigue which leads to damage in concrete and steel rebar. Interaction between corrosion and fatigue crack growth in steel reinforcing bars is implemented. The third degradation phenomenon is the CFRP properties deterioration due to aging. Considering these three degradation factors, the time-dependent flexural reliability profile of a typical simple 15 m-span intermediate girder of a RC highway bridge is constructed under various traffic volumes and under different corrosion environments. The bridge design options follow AASHTO-LRFD specifications. Results of the study have shown that the reliability is very sensitive to factors governing the corrosion. Concrete damage due to fatigue slightly affects reliability profile of non-strengthened section, while service life after strengthening is strongly related to fatigue damage in concrete. - Highlights: • We propose a method to follow the time-variant reliability of strengthened RC beams. • We consider multiple competing failure modes of CFRP strengthened RC beams. • We consider combined degradation mechanisms (corrosion, fatigue, ageing of CFRP)

  8. Glass Fiber Reinforced Polymer (GFRP Bars for Enhancing the Flexural Performance of RC Beams Using Side-NSM Technique

    Md. Akter Hosen

    2017-05-01

    Full Text Available Reinforced concrete (RC structures require strengthening for numerous factors, such as increased load, modification of the structural systems, structural upgrade or errors in the design and construction stages. The side near-surface mounted (SNSM strengthening technique with glass fiber-reinforced polymer (GFRP bars is a relatively new emerging technique for enhancing the flexural capacities of existing RC elements. Nine RC rectangular beams were flexurally strengthened with this technique and tested under four-point bending loads until failure. The main goal of this study is to optimize the structural capacity of the RC beams by varying the amount of strengthening reinforcement and bond length. The experimental test results showed that strengthening with SNSM GFRP bars significantly enhanced the flexural responses of the specimens compared with the control specimen. The first cracking and ultimate loads, energy absorption capacities, ductility and stiffness were remarkably enhanced by the SNSM technique. It was also confirmed that the bond length of the strengthened reinforcement greatly influences the energy absorption capacities, ductility and stiffness. The effect of the bond length on these properties is more significant compared to the amount of strengthening reinforcement.

  9. Digital citizens Digital nations: the next agenda

    A.W. (Bert) Mulder; M.W. (Martijn) Hartog

    2015-01-01

    DIGITAL CITIZENS CREATE A DIGITAL NATION Citizens will play the lead role as they – in the next phase of the information society – collectively create a digital nation. Personal adoption of information and communication technology will create a digital infrastructure that supports individual and

  10. Pinatubo Emulation in Multiple Models (POEMs): co-ordinated experiments in the ISA-MIP model intercomparison activity component of the SPARC Stratospheric Sulphur and it's Role in Climate initiative (SSiRC)

    Lee, Lindsay; Mann, Graham; Carslaw, Ken; Toohey, Matthew; Aquila, Valentina

    2016-04-01

    The World Climate Research Program's SPARC initiative has a new international activity "Stratospheric Sulphur and its Role in Climate" (SSiRC) to better understand changes in stratospheric aerosol and precursor gaseous sulphur species. One component of SSiRC involves an intercomparison "ISA-MIP" of composition-climate models that simulate the stratospheric aerosol layer interactively. Within PoEMS each modelling group will run a "perturbed physics ensemble" (PPE) of interactive stratospheric aerosol (ISA) simulations of the Pinatubo eruption, varying several uncertain parameters associated with the eruption's SO2 emissions and model processes. A powerful new technique to quantify and attribute sources of uncertainty in complex global models is described by Lee et al. (2011, ACP). The analysis uses Gaussian emulation to derive a probability density function (pdf) of predicted quantities, essentially interpolating the PPE results in multi-dimensional parameter space. Once trained on the ensemble, a Monte Carlo simulation with the fast Gaussian emulator enabling a full variance-based sensitivity analysis. The approach has already been used effectively by Carslaw et al., (2013, Nature) to quantify the uncertainty in the cloud albedo effect forcing from a 3D global aerosol-microphysics model allowing to compare the sensitivy of different predicted quantities to uncertainties in natural and anthropogenic emissions types, and structural parameters in the models. Within ISA-MIP, each group will carry out a PPE of runs, with the subsequent analysis with the emulator assessing the uncertainty in the volcanic forcings predicted by each model. In this poster presentation we will give an outline of the "PoEMS" analysis, describing the uncertain parameters to be varied and the relevance to further understanding differences identified in previous international stratospheric aerosol assessments.

  11. Ion distributions in RC at different energy levels retrieved from TWINS ENA images by voxel CT tech

    Ma, S. Y.; McComas, David; Xu, Liang; Goldstein, Jerry; Yan, Wei-Nan

    2012-07-01

    Distributions of energetic ions in the RC regions in different energy levels are retrieved by using 3-D voxel CT inversion method from ENA measurements onboard TWINS constellation during the main phase of a moderate geomagnetic storm. It is assumed that the ion flux distribution in the RC is anisotropic in regard to pitch angle which complies with the adiabatic invariance of the magnetic moment as ion moving in the dipole magnetic mirror field. A semi-empirical model of the RC ion distribution in the magnetic equator is quoted to form the ion flux distribution shape at off-equatorial latitudes by mapping. For the concerned time interval, the two satellites of the TWINS flying in double Molnia orbits were located in nearly the same meridian plane at vantage points widely separated in magnetic local time, and both more than 5 RE geocentric distance from the Earth. The ENA data used in this study are differential fluxes averaged over 12 sweeps (corresponding to an interval of 16 min.) at different energy levels ranging from about 1 to 100 keV. The retrieved ion distributions show that in total the main part of the RC is located in the region with L value larger than 4, tending to increase at larger L. It reveals that there are two distinct dominant energy bands at which the ion fluxes are significantly larger magnitude than at other energy levels, one is at lower level around 2 keV and the other at higher level of 30-100 keV. Furthermore, it is very interesting that the peak fluxes of the RC ions at the two energy bands occurred in different magnetic local time, low energy ions appear preferentially in after midnight, while the higher energy ions mainly distributed around midnight and pre-midnight. This new profile is worthy of further study and needs to be demonstrated by more cases.

  12. DEVELOPMENT OF A MICROCONTROLLED TEMPERATURE MONITORING SYSTEM AND EVALUATION OF THE SENSOR ELEMENT IMPLANT IN BOVINES DESENVOLVIMENTO DE UM SISTEMA MICROCONTROLADO DE MONITORAÇÃO DA TEMPERATURA E AVALIAÇÃO DO IMPLANTE DO ELEMENTO SENSOR DIGITAL EM BOVINOS

    Ernane José Xavier Costa

    2007-09-01

    Full Text Available

    this paper presents a complete system for tempe-rature monitoring. the system was developed to speed up bovine behavior studies under temperature exposure. the equipment uses digital technology with custom setup ca-pability by means of computer program and the sensor can be implanted in to animal. results obtained show that the developed system is able to monitor bovine temperatures with a sample rate of five minutes during 30 days with accuracy of 0.0625 oc.

    KEY-WORDS: Heat stress sensors, optical, temperature, transceptor.

    um sistema completo de instrumentação para monitoração de temperatura é apresentado neste artigo. o sistema foi desenvolvido para auxiliar estudo de estresse térmico em bovinos. neste equipamento, o elemento sensor pode ser implantado no animal. o equipamento consiste de tecnologia digital e óptica com capacidade de configuração através de programa de computador. os resultados obtidos mostram que o sistema desenvolvido é capaz de monitorar a temperatura de bovinos a cada cinco minutos durante trinta dias com resolução de 0.0625 oc.

    PALAVRAS-CHAVE: estresse térmico sensores, óptico, temperatura, transceptor.  

  13. Evaluation of <em>HER2em> Gene Amplification in Breast Cancer Using Nuclei Microarray <em>in em>S>itu em>Hybridization

    Xuefeng Zhang

    2012-05-01

    Full Text Available Fluorescence<em> em>>in situ em>hybridization (FISH assay is considered the “gold standard” in evaluating <em>HER2/neu (HER2em> gene status. However, FISH detection is costly and time consuming. Thus, we established nuclei microarray with extracted intact nuclei from paraffin embedded breast cancer tissues for FISH detection. The nuclei microarray FISH (NMFISH technology serves as a useful platform for analyzing <em>HER2em> gene/chromosome 17 centromere ratio. We examined <em>HER2em> gene status in 152 cases of invasive ductal carcinomas of the breast that were resected surgically with FISH and NMFISH. <em>HER2em> gene amplification status was classified according to the guidelines of the American Society of Clinical Oncology and College of American Pathologists (ASCO/CAP. Comparison of the cut-off values for <em>HER2em>/chromosome 17 centromere copy number ratio obtained by NMFISH and FISH showed that there was almost perfect agreement between the two methods (κ coefficient 0.920. The results of the two methods were almost consistent for the evaluation of <em>HER2em> gene counts. The present study proved that NMFISH is comparable with FISH for evaluating <em>HER2em> gene status. The use of nuclei microarray technology is highly efficient, time and reagent conserving and inexpensive.

  14. Digital fluorimeter

    Mello, H.A. de.

    1980-11-01

    The specifications of a digital fluorimeter. That with adequated analytical techniques permits to determine trace amounts of fluorescents materials in samples, are described. The fluorimeter is of the reflection type, and uses fluorescents lamps for the excitation and an optical system which is connected to a photomultiplyer machine and permits the measurement of the light intensity. In the case of IEN (Instituto de Engenharia Nuclear) the equipment is used for to determine the uranium content in sample materials to be exported. The precision of the instrument is about + - 1% in the scale of 0.1 which is the normally one used in the current researchs. (E.G.) [pt

  15. Digital entrepreneurship

    Brem, Alexander; Richter, Chris; Kraus, Sascha

    2017-01-01

    comprising guided interviews with 14 companies from Germany, Austria and Switzerland provides detailed insights into different aspects of the sharing economy phenomenon. Our results make a direct contribution to sharing economy research, especially regarding the new business models of start-ups. Here, we...... find a clear difference between the relevance of economic and social orientation. The latter appears to be in higher demand among customers than entrepreneurs. The increasingly digitalized environment has led to a changed living situation characterized by urbanity, openness to new solutions, changed...

  16. Focus: Digital

    Technology has been an all-important and defining element within the arts throughout the 20th century, and it has fundamentally changed the ways in which we produce and consume music. With this Focus we investigate the latest developments in the digital domain – and their pervasiveness and rapid...... production and reception of contemporary music and sound art. With ‘Digital’ we present four composers' very different answers to how technology impact their work. To Juliana Hodkinson it has become an integral part of her sonic writing. Rudiger Meyer analyses the relationships between art and design and how...

  17. Avaliação da eficácia de um antagonista do receptor do peptídeo liberador da gastrina em modelos experimentais de artrite

    Patricia Gnieslaw de Oliveira

    2011-01-01

    O peptídeo liberador da gastrina (GRP) é o homologo mamífero da bombesina (BN). Ambos GRP e seus receptores têm sido encontrados na sinóvia de pacientes com artríte reumatoide. O receptor do peptídeo liberador da gastrina (GRPR) pode ser considerado como um alvo terapêutico para doenças inflamatórias. RC-3095 é um antagonista do receptor de GRP. Este estudo avaliou os efeitos anti-inflamatórios do RC-3095, um antagonista específico do receptor do peptídeo liberador da gastrina, em dois modelo...

  18. A New Natural Lactone from <em>Dimocarpus> <em>longan> Lour. Seeds

    Zhongjun Li

    2012-08-01

    Full Text Available A new natural product named longanlactone was isolated from <em>Dimocarpus> <em>longan> Lour. seeds. Its structure was determined as 3-(2-acetyl-1<em>H>-pyrrol-1-yl-5-(prop-2-yn-1-yldihydrofuran-2(3H-one by spectroscopic methods and HRESIMS.

  19. Contributos da escola para a inclusão digital

    Silva, Bento Duarte; Barbosa Pereira, Maria da Graça Caridade

    2011-01-01

    Este texto pretende analisar o contributo da escola para a inclusão digital, um tema fundamental uma vez que vivemos na era da Sociedade da Informação e Comunicação. Tendo em conta as estratégias de inclusão expressas em iniciativas institucionais que aliam tecnologia e educação, analisamos a relação dos jovens com as TIC, em particular com o computador/Internet, nas suas vivências diárias em contexto formal (escolar) e informal (familiar), expressa nos usos, competências e valori...

  20. Digital Humanities

    Nielsen, Hans Jørn

    2015-01-01

    overgangen fra trykkekultur til digital kultur. For det første problemstillingen omkring digitalisering af litterær kulturarv med fokus på kodning og tagging af teksten samt organisering i hypertekststrukturer. For det andet reorganiseringen af det digitale dokument i dataelementer og database. For det......Artiklen præsenterer først nogle generelle problemstillinger omkring Digital Humanities (DH) med det formål at undersøge dem nærmere i relation til konkrete eksempler på forskellige digitaliseringsmåder og ændringer i dokumentproduktion. I en nærmere afgrænsning vælger artiklen den tendens i DH......, der betragter DH som forbundet med "making" og "building" af digitale objekter og former. Dette kan også karakteriseres som DH som praktisk-produktiv vending. Artiklen har valgt tre typer af digitalisering. De er valgt ud fra, at de skal repræsentere forskellige måder at håndtere digitaliseringen på...

  1. Sugli studi medievali e il mutamento digitale On the medieval studies and the digital change

    Redazione Reti Medievali (a cura di

    2004-12-01

    Full Text Available

    La sezione raccoglie tre brevi comunicazioni, tenute nell’ambito del seminario <em>Medium-Evo. Gli studi medievali e il mutamento digitaleem> (Firenze, 2001 e dedicate rispettivamente ai periodici e alle forme di comunicazione del sapere (Giorgio Chittolini, al problema del reperimento delle risorse e della repertoriazione delle fonti (Paolo Delogu, ai contraccolpi dell’uso del mezzo informatico sulla scrittura della storia (Giuseppe Sergi.

    This section includes three short papers - presented at the seminar on <em>Medium-Evo. em>>Gli studi medievali e il mutamento digitaleem> (Firenze, 2001 (<em>Medium-Evo. em>>Medieval studies and the digital changeem> - which are respectively focused on periodicals, different types of learning communication (Giorgio Chittolini, problems linked to document searching and filing (Paolo Delogu, backlashes  coming from the use of computer in writing history (Giuseppe Sergi.

  2. Reference Gene Selection in the Desert Plant <em>Eremosparton songoricuem>m>

    Dao-Yuan Zhang

    2012-06-01

    Full Text Available <em>Eremosparton songoricum em>(Litv. Vass. (<em>E. songoricumem> is a rare and extremely drought-tolerant desert plant that holds promise as a model organism for the identification of genes associated with water deficit stress. Here, we cloned and evaluated the expression of eight candidate reference genes using quantitative real-time reverse transcriptase polymerase chain reactions. The expression of these candidate reference genes was analyzed in a diverse set of 20 samples including various <em>E. songoricumem> plant tissues exposed to multiple environmental stresses. GeNorm analysis indicated that expression stability varied between the reference genes in the different experimental conditions, but the two most stable reference genes were sufficient for normalization in most conditions.<em> EsEFem> and <em>Esα-TUB> were sufficient for various stress conditions, <em>EsEF> and <em>EsACT> were suitable for samples of differing germination stages, and <em>EsGAPDH>and <em>Es>UBQ em>were most stable across multiple adult tissue samples. The <em>Es18Sem> gene was unsuitable as a reference gene in our analysis. In addition, the expression level of the drought-stress related transcription factor <em>EsDREB2em>> em>verified the utility of<em> E. songoricumem> reference genes and indicated that no single gene was adequate for normalization on its own. This is the first systematic report on the selection of reference genes in <em>E. songoricumem>, and these data will facilitate future work on gene expression in this species.

  3. Design and analysis of the vacuum vessel for RTO/RC-ITER

    Onozuka, M.; Ioki, K.; Johnson, G.; Kodama, T.; Sannazzaro, G.; Utin, Y.

    2000-01-01

    Recent progress in design and analysis of the vacuum vessel (VV) for the reduced technical objectives/reduced cost International Thermonuclear Experimental Reactor (RTO/RC-ITER) is presented. The basic VV design is similar to the previous ITER VV. However, because the back plate for the blanket modules could be eliminated, its previous functions could be transferred to the VV. For this option, the blanket modules are supported directly by the VV and the blanket coolant channels are structurally part of the VV double wall structure. In addition, a 'tight fitting' configuration is required to correctly position the modules' first wall. Although such modifications of the VV complicate its structure and increase its fabrication cost, the design of the VV is considered to be still feasible. The structural analyses of the VV have been conducted using several FE models of the VV, including global and local models. Although further assessment is required, based on the analyses performed to date, the structural aspects of the VV for the case without the back plate appear feasible

  4. RTO/RC ITER plasma performance: inductive and steady-state operation

    Mukhovatov, V.; Boucher, D.; Fujisawa, N.; Shimada, M.; Vayakis, G.; Janeschitz, G.; Matsumoto, H.; Leonov, V.; Polevoy, A.

    2000-01-01

    The plasma performance in two design options of the reduced-technical objectives/reduced cost (RTO/RC) ITER, i.e. IAM (intermediate aspect ratio machine) and LAM (low aspect ratio machine) is analysed. It is shown that Q=P fus /P aux ∼10 can be obtained in both options at inductively driven ELMy H-mode operation. The operation domain in LAM is found to be marginally larger than that in IAM. The non-inductive operation with Q approx.= 5 will be possible in both machines, provided a large amount of power with a high current drive efficiency is applied, or substantial improvement of the energy confinement time relative to the ELMy H-mode (H H =1.2-1.4) is obtained. The required values of H H and β N are marginally smaller in IAM. The IAM-like machine, ITER-FEAT (fusion energy advanced tokamak), proposed for a detailed engineering design is discussed in brief. (author)

  5. Material activation assessment for waste analysis of the EU design of RC/RTO ITER

    Cambi, G.; Cepraga, D.G.; Frisoni, M.

    2001-01-01

    This paper presents the results of Sn radiation transport and activation calculations related to the ITER RC/RTO EU-I design, performed in support of safety and waste management analyses. The activation characteristics (included the clearance levels) have been estimated for the different materials/zones of the equatorial plane up to 10 5 years after plasma operations. The Bonami-XSDNRPM sequence of the Scale 4.4 code system (using Vitamin-ENEA library, based on ENDF/B-VI data) has been used for radiation transport analyses. The ANITA-4M activation code (with FENDL/A-2 and FENDL/D-2 activation and decay data libraries) is used for the activation calculation. The unconditional clearance level data library is based on IAEA-TECDOC-855. First, a sensitivity analysis to optimise the radial spatial meshing for the neutron flux distribution evaluation and, accordingly, for the activation calculation, has been performed. Then, the clearance indexes of vessel and ex-vessel zones/materials have been calculated. The results are presented and discussed. A design option that considers copper instead of superconductor material for TFC winding pack has also been considered and assessed

  6. Masonry Infilling Effect On Seismic Vulnerability and Performance Level of High Ductility RC Frames

    Ghalehnovi, M.; Shahraki, H.

    2008-01-01

    In last years researchers preferred behavior-based design of structure to force-based one for designing and construction of the earthquake-resistance structures, this method is named performance based designing. The main goal of this method is designing of structure members for a certain performance or behavior. On the other hand in most of buildings, load bearing frames are infilled with masonry materials which leads to considerable changes in mechanical properties of frames. But usually infilling wall's effect has been ignored in nonlinear analysis of structures because of complication of the problem and lack of simple logical solution. As a result lateral stiffness, strength, ductility and performance of the structure will be computed with less accuracy. In this paper by use of Smooth hysteretic model for masonry infillings, some high ductile RC frames (4, 8 stories including 1, 2 and 3 spans) designed according to Iranian code are considered. They have been analyzed by nonlinear dynamic method in two states, with and without infilling. Then their performance has been determined with criteria of ATC 40 and compared with recommended performance in Iranian seismic code (standard No. 2800)

  7. Security devices and experiment facilities at ENEA TRIGA RC-1 reactor

    Bianchi, P.; Festinesi, A.; Santoro, E.; Tardani, G.; Magli, M.; Reis, G.

    1990-01-01

    RC-1 TRIGA operating exercise staff has produced some auxiliary security devices. These are the neutron source automatic handling device, irradiated samples rabbit connection rotating rack, and auxiliary equipment for transferring hot fuel elements. The reactor electronic control instrumentation system includes various instrumentation channels, the operating capability of which must be verified by the licensee as per Italian regulations. In order to obtain automatic and repeatable operations, TEMAV designed and constructed a remotely-driven source transfer device, based on requirements, performance specifications and technical data supplied by ENEA-TIB. The pneumatic irradiating system for short lived materials allows extraction of radiated samples in a time no longer than 4 seconds. To optimize the system, both as to operability and health protection, a specific rotating rack for the connection of irradiated samples with pneumatic transfer (RABBIT) was produced. To permit 1 MW hot fuel element storage in pits it is necessary to remove hot 100 KW fuel elements and transfer them to a re-treatment plant. Feasibility studies showed the impossibility of using heavy trucks inside the reactor hall. To avoid problems trucks are left outside the reactor hall and only the PEGASO container is removed with a special device that runs on rails. Movement from Rail truck is assured by an electromotor driving pull device and security cable

  8. Vibration based structural assessment of the rehabilitation intervention in r.c. segmental bridge

    Franchetti Paolo

    2015-01-01

    Full Text Available A vibration based structural assessment campaign was carried out on a r.c. segmental bridge in North East Italy. The bridge has a cantilever static scheme, fixed at the top of the piers and with a hinge at the centre of the span. The particular configuration of the hinge consists in a couple of steel elements, each one composed by a tongue and groove joint. Since the year 1960, the hinge was subjected to consumption and degradation, that caused a malfunctioning of the device. An intervention of rehabilitation of the bridge led to a reinforcement of the existing hinges with the coupling of new metallic devices: new tongue and groove hinges were applied, that by one side allow the horizontal displacements and rotation, by the other side strongly reduce the relative vertical displacements of the two parts of the bridge. A dynamic test campaign was set up in order to assess the effectiveness of the intervention. The principal dynamic parameters were calculated and analysed with respect to the intervention that was realized. The tests clearly showed the effectiveness of the intervention, and helped the designer to have a better understanding of the structural behaviour of the bridge.

  9. Improved seismic response of rc frame structures by using fluid viscous dampers

    Khan, Q.S.; Qazi, A.U.; Ilyas, M.

    2013-01-01

    In modern era passive control devices are used to improve the seismic response of structures during large magnitude earthquakes. In this research an analytical study is carried out on commercial FEM program SAP 2000 by modeling five, seven and nine storey RC frame structures. Response to four earthquake ground motions on modeled frame structures is studied and is effectively controlled by varying the characteristic properties of Fluid viscous dampers (FVD). Response in terms of frequency, displacement, velocity, acceleration, storey drift, base shear and energy dissipation is studied. Quantitatively in the modeled frames damage in terms of percentage change in global stiffness and natural frequency is determined. Qualitatively damage in terms of performance levels as per ATC-40 and FEMA-440 is considered. With an increase in Additional Stiffness Ratio of FVD corresponding increase in natural frequency and reduction in dynamic response is observed. FVDs significantly improve structural performance level of frames from Completely Damage to Immediate Occupancy/Operational Level during large magnitude earthquakes. (author)

  10. Variation of over strength factor for mid-rise R.C. moment resisting frames

    Tasnimi, A. A.; Mahmoodi Sahebi, M.

    2001-01-01

    The over strength of a multi-storey structure (as a multi-degree of freedom system) is one of the parameters playing the evaluation of the behaviour factor. This is an important property when the structure exhibits inelastic behaviour and is described by over strength factor. The over strength factor and strength reduction factor due to ductility are considered in most seismic design codes of practice to reduce the elastic strength demand of the structure. In spite the importance of the over strength, its influence has not yet been quantified. This paper is a part of an investigation from which the first part was published in Amirkabir Journal No.36/Winter 1998, entitled as E stimation of over strength of low-ri sed flexural R.C. frames using nonlinear analysis . This paper investigates the variation of over strength factor for reinforced concrete moment resisting frames, having several stories (5 to 15) with various spans (3 to 5) and located in high seismicity regions using non-linear inelastic analysis. The results indicate that the over strength factor of these systems efforts 25 to 40 percent reduction in the elastic strength demand of such frames

  11. SEISMIC FRAGILITY ANALYSIS OF IMPROVED RC FRAMES USING DIFFERENT TYPES OF BRACING

    HAMED HAMIDI JAMNANI

    2017-04-01

    Full Text Available Application of bracings to increase the lateral stiffness of building structures is a technique of seismic improvement that engineers frequently have recourse to. Accordingly, investigating the role of bracings in concrete structures along with the development of seismic fragility curves are of overriding concern to civil engineers. In this research, an ordinary RC building, designed according to the 1st edition of Iranian seismic code, was selected for examination. According to FEMA 356 code, this building is considered to be vulnerable. To improve the seismic performance of this building, 3 different types of bracings, which are Concentrically Braced Frames, Eccentrically Braced Frames and Buckling Restrained Frames were employed, and each bracing element was distributed in 3 different locations in the building. The researchers developed fragility curves and utilized 30 earthquake records on the Peak Ground Acceleration seismic intensity scale to carry out a time history analysis. Tow damage scale, including Inter-Story Drifts and Plastic Axial Deformation were also used. The numerical results obtained from this investigation confirm that Plastic Axial Deformation is more reliable than conventional approaches in developing fragility curves for retrofitted frames. In lieu of what is proposed, the researchers selected the suitable damage scale and developed and compared log-normal distribution of fragility curves first for the original and then for the retrofitted building.

  12. Implementasi Aplikasi Kriptografi Pada Layanan Pesan Singkat (SMS Menggunakan Algoritma RC6 Berbasis Android

    Widi Puji Atmojo

    2016-08-01

    Full Text Available Security is a very important aspect in data communication. In the last decade, there was a rapid development in mobile phone technology. Smartphone have been equipped with various features and one of them is the short message service (SMS. However, messages sent via mobile phone networks pose threat to be accessed by people who do not have any authorization. Therefore, it is necessary to do research on the development of software to enhance the security of messages through message encryption and decryption features. This application uses Java programming language with SDK (Software Development Kit Android and Android Studio 1.3.1 as an editor. The initial step of this research is to encrypt the original message to produce the ciphertext message. The second step is to decrypt ciphertext incoming messages to become genuine message. Results from this research are an Android-based application that can perform encryption and decryption of the SMS messages using the RC6 algorithm. With the application of cryptography for SMS messages, the expected level of information security of the message can be improved so that the message will be more secure from unauthorized access.

  13. Flexural and Shear Behavior of RC Concrete Beams Reinforced with Fiber Wire Mesh

    Rafea Flaih Hassan

    2018-02-01

    Full Text Available This work aims to study  the effect of using fiber wire mesh on the flexural and shear properties of RC concrete beams. Six reinforced concrete beams (120*180*1220mm were tested under two load points. Fiber wire mesh was applied with two manners, first one is three layers as U shape around the section of the beam, the second one is four layers around overall section of beam. The test results indicated that using of fiber wire mesh as additional reinforcement can increase the ultimate load of about (1.85-3.58% in the case of flexural and (17.7-23.7% in case of shear. Also,  results showed that an increasing in  first cracking  load is obtained from  (42.8-85.7% in case of flexural and from (41.2-76.5% in case of shear. Also the shear behavior of beams becomes more ductile when the fiber wire mesh was used in beams. The cracks of shrinkage was disappeared when the fiber wire mesh surround the section of the beam. 

  14. Design and analysis of the vacuum vessel for RTO/RC-ITER

    Onozuka, M. E-mail: onozukm@itereu.de; Ioki, K.; Johnson, G.; Kodama, T.; Sannazzaro, G.; Utin, Y

    2000-11-01

    Recent progress in design and analysis of the vacuum vessel (VV) for the reduced technical objectives/reduced cost International Thermonuclear Experimental Reactor (RTO/RC-ITER) is presented. The basic VV design is similar to the previous ITER VV. However, because the back plate for the blanket modules could be eliminated, its previous functions could be transferred to the VV. For this option, the blanket modules are supported directly by the VV and the blanket coolant channels are structurally part of the VV double wall structure. In addition, a 'tight fitting' configuration is required to correctly position the modules' first wall. Although such modifications of the VV complicate its structure and increase its fabrication cost, the design of the VV is considered to be still feasible. The structural analyses of the VV have been conducted using several FE models of the VV, including global and local models. Although further assessment is required, based on the analyses performed to date, the structural aspects of the VV for the case without the back plate appear feasible.

  15. Estimating the behavior of RC beams strengthened with NSM system using artificial neural networks

    Seyed Rohollah Hosseini Vaez

    2017-12-01

    Full Text Available In the last decade, conventional materials such as steel and concrete are being replaced by fiber reinforced polymer (FRP materials for the strengthening of concrete structures. Among the strengthening techniques based on Fiber Reinforced Polymer composites, the use of near-surface mounted (NSM FRP rods is emerging as a promising technology for increasing flexural and shear strength of deficient concrete, masonry and timber members. An artificial neural network is an information processing tool that is inspired by the way biological nervous systems (such as the brain process the information. The key element of this tool is the novel structure of the information processing system. In engineering applications, a neural network can be a vector mapper which maps an input vector to an output one. In the present study, a new approach is developed to predict the behavior of strengthened concrete beam using a large number of experimental data by applying artificial neural networks. Having parameters used as input nodes in ANN modeling such as elastic modulus of the FRP reinforcement, the ratio of the steel longitudinal reinforcement, dimensions of the beam section, the ratio of the NSM-FRP reinforcement and characteristics of concrete, the output node was the flexural strength of beams. The idealized neural network was employed to generate empirical charts and equations to be used in design. The aim of this study is to investigate the behavior of strengthened RC beam using artificial neural networks.

  16. Development of a rocking R/C shear wall system implementing repairable structural fuses

    Parsafar, Saeed; Moghadam, Abdolreza S.

    2017-09-01

    In the last decades, the concept of earthquake resilient structural systems is becoming popular in which the rocking structure is considered as a viable option for buildings in regions of high seismicity. To this end, a novel wall-base connection based on the " repairable structure" approach is proposed and evaluated. The proposed system is made of several steel plates and high strength bolts act as a friction connection. To achieve the desired rocking motion in the proposed system, short-slotted holes are used in vertical directions for connecting the steel plates to the shear wall (SW). The experimental and numerical studies were performed using a series of displacement control quasi-static cyclic tests on a reference model and four different configurations of the proposed connection installed at the wall corners. The seismic response of the proposed system is compared to the conventional SW in terms of energy dissipation and damage accumulation. In terms of energy dissipation, the proposed system depicted better performance with 95% more energy dissipation capability compared to conventional SW. In terms of damage accumulation, the proposed SW system is nearly undamaged compared to the conventional wall system, which was severely damaged at the wall-base region. Overall, the introduced concept presents a feasible solution for R/C structures when a low-damage design is targeted, which can improve the seismic performance of the structural system significantly.

  17. Pencil-on-Paper Capacitors for Hand-Drawn RC Circuits and Capacitive Sensing

    Jonathan E. Thompson

    2017-01-01

    Full Text Available Electronic capacitors were constructed via hand-printing on paper using pencil graphite. Graphite traces were used to draw conductive connections and capacitor plates on opposing sides of a sheet of standard notebook paper. The paper served as the dielectric separating the plates. Capacitance of the devices was generally < 1000 pF and scaled with surface area of the plate electrodes. By combining a pencil-drawn capacitor with an additional resistive pencil trace, an RC low-pass filter was demonstrated. Further utility of the pencil-on-paper devices was demonstrated through description of a capacitive force transducer and reversible chemical sensing. The latter was achieved for water vapor when the hygroscopic cellulose matrix of the paper capacitor’s dielectric adsorbed water. The construction and demonstration of pencil-on-paper capacitive elements broadens the scope of paper-based electronic circuits while allowing new opportunities in the rapidly expanding field of paper-based sensors.

  18. Simulation of Shear and Bending Cracking in RC Beam: Material Model and its Application to Impact

    Mokhatar, S. N.; Sonoda, Y.; Zuki, S. S. M.; Kamarudin, A. F.; Noh, M. S. Md

    2018-04-01

    This paper presents a simple and reliable non-linear numerical analysis incorporated with fully Lagrangian method namely Smoothed Particle Hydrodynamics (SPH) to predict the impact response of the reinforced concrete (RC) beam under impact loading. The analysis includes the simulation of the effects of high mass low-velocity impact load falling on beam structures. Three basic ideas to present the localized failure of structural elements are: (1) the accurate strength of concrete and steel reinforcement during the short period (dynamic), Dynamic Increase Factor (DIF) has been employed for the effect of strain rate on the compression and tensile strength (2) linear pressure-sensitive yield criteria (Drucker-Prager type) with a new volume dependent Plane-Cap (PC) hardening in the pre-peak regime is assumed for the concrete, meanwhile, shear-strain energy criterion (Von-Mises) is applied to steel reinforcement (3) two kinds of constitutive equation are introduced to simulate the crushing and bending cracking of the beam elements. Then, these numerical analysis results were compared with the experimental test results.

  19. Anchorage strength models for end-debonding predictions in RC beams strengthened with FRP composites

    Nardini, V.; Guadagnini, M.; Valluzzi, M. R.

    2008-05-01

    The increase in the flexural capacity of RC beams obtained by externally bonding FRP composites to their tension side is often limited by the premature and brittle debonding of the external reinforcement. An in-depth understanding of this complex failure mechanism, however, has not yet been achieved. With specific regard to end-debonding failure modes, extensive experimental observations reported in the literature highlight the important distinction, often neglected in strength models proposed by researchers, between the peel-off and rip-off end-debonding types of failure. The peel-off failure is generally characterized by a failure plane located within the first few millimetres of the concrete cover, whilst the rip-off failure penetrates deeper into the concrete cover and propagates along the tensile steel reinforcement. A new rip-off strength model is described in this paper. The model proposed is based on the Chen and Teng peel-off model and relies upon additional theoretical considerations. The influence of the amount of the internal tensile steel reinforcement and the effective anchorage length of FRP are considered and discussed. The validity of the new model is analyzed further through comparisons with test results, findings of a numerical investigation, and a parametric study. The new rip-off strength model is assessed against a database comprising results from 62 beams tested by various researchers and is shown to yield less conservative results.

  20. Recent improvements to RC-line encoded position-sensitive proportional counters

    Borkowski, C.J.; Kopp, M.K.

    1977-01-01

    Continuing research on the principles of position encoding with RC lines has advanced the design of position-sensitive proportional counters (PSPCs) to meet the requirements for high count rates (>10 5 counts/sec) and good spatial resolution (>10 4 spatial elements) in small-angle scattering experiments with x rays and neutrons. Low-noise preamplifiers were developed with pole-zero cancellation in the feedback circuit and modular linear amplifiers with passive RCL shaping which, compared to previous designs, reduce output saturation at high count rates approx.20 times and shorten the position signal processing time to 2 ) for low-energy ( 800 x 800 mm 2 ) for the measurement of small-angle scattering with neutrons. The method of electronic thickness discrimination was applied to change the effective thickness of an area PSPC from 12 to 2 cm whenever the molybdenum target of an x-ray generator was changed to a copper target. This thickness adjustment increased the signal-to-background ratio by a factor of approx.6 for the 8-keV photons from the copper target, while maintaining a >90% detection efficiency

  1. Hausdorff-Based RC and IESIL Combined Positioning Algorithm for Underwater Geomagnetic Navigation

    Lin Yi

    2010-01-01

    Full Text Available This paper presents a primitive solution with novel scheme and algorithm for Underwater geoMagnetic Navigation (UMN, which now occurs as the hot-point in the research field of navigation. UMN as an independent or supplementary technique can theoretically supply accurate locations for marine vehicles, but in practice there are plenty of restrictions for UMN's application (e.g., geomagnetic daily variation. After analysis of the theoretical model of geomagnetic positioning in the correlation-matching mode from the viewpoint of pattern recognition, this paper proposed an appropriate matching scenario and a combined positioning algorithm for UMN. The subalgorithm of Hausdorff-based Relative Correlation (RC corresponding to the pattern classification module implements the coarse positioning, and the subalgorithm of Isograms Equidistance-Segmenting theIntersection Lines (IESILs associated with the module of feature extraction continues the fine positioning. The experiments based on the simulation platform and the real-surveyed data both validate the new algorithm, and its efficiency and accuracy are also discussed. It can be concluded that the work introduced in this paper gives an initial and real validation of UMN's potentiality.

  2. Prediction of strain values in reinforcements and concrete of a RC frame using neural networks

    Vafaei, Mohammadreza; Alih, Sophia C.; Shad, Hossein; Falah, Ali; Halim, Nur Hajarul Falahi Abdul

    2018-03-01

    The level of strain in structural elements is an important indicator for the presence of damage and its intensity. Considering this fact, often structural health monitoring systems employ strain gauges to measure strains in critical elements. However, because of their sensitivity to the magnetic fields, inadequate long-term durability especially in harsh environments, difficulties in installation on existing structures, and maintenance cost, installation of strain gauges is not always possible for all structural components. Therefore, a reliable method that can accurately estimate strain values in critical structural elements is necessary for damage identification. In this study, a full-scale test was conducted on a planar RC frame to investigate the capability of neural networks for predicting the strain values. Two neural networks each of which having a single hidden layer was trained to relate the measured rotations and vertical displacements of the frame to the strain values measured at different locations of the frame. Results of trained neural networks indicated that they accurately estimated the strain values both in reinforcements and concrete. In addition, the trained neural networks were capable of predicting strains for the unseen input data set.

  3. Parameters That Effect the Interfacial Stresses in Fibre Reinforced Plastic Laminates Strengthened Rc Beams

    Barış Sayın

    2010-01-01

    Full Text Available The use of externally bonded fiber-reinforced plastic (FRP laminates for strengthening of reinforced concrete beams has become an effective method. This method has been used because of the advantages of FRP materials such as their high strength-to-weight ratio, good corrosion resistance, and versatility in coping with different sectional shapes and corners. Many studies on this theme have been carried out since the early 1900s. In this study, interfacial stresses of reinforced concrete beams strengthened with FRP effect the parameters will be studied as experimental and numerical. Adhesives used in the beams applied to FRP's thickness, adhesive type and the state of the concrete surface, produced experimental samples are exposed to the bending effect will be studied as a comparative. Afterwards, by using the ANSYS® WB finite element program to model and analyze RC beams by externally bonding FRP will be carried out. Adhesive thickness, adhesive type, the concrete surface will be performed by entering the parameters for analysis of stress can be obtained as a result. Thus, the analytical expressions of stress and normal stress equations will establish should be modified. Finite element analysis and experimental results will be compared, compatibility investigated, the results and recommendations presented by the study be completed.

  4. Analysis of Foundation of Tall R/C Chimney Incorporating Flexibility of Soil

    Jayalekshmi, B. R.; Jisha, S. V.; Shivashankar, R.

    2017-09-01

    Three dimensional Finite Element (FE) analysis was carried out for 100 and 400 m high R/C chimneys having piled annular raft and annular raft foundations considering the flexibility of soil subjected to across-wind load. Stiffness of supporting soil and foundation were varied to evaluate the significance of Soil-Structure Interaction (SSI). The integrated chimney-foundation-soil system was analysed by finite element software ANSYS based on direct method of SSI assuming linear elastic material behaviour. FE analyses were carried out for two cases of SSI namely, (1) chimney with annular raft foundation and (2) chimney with piled annular raft foundation. The responses in raft such as bending moments and settlements were evaluated for both the cases and compared to those obtained from the conventional method of analysis of annular raft foundation. It is found that the responses in raft vary considerably depending on the stiffness of the underlying soil and the stiffness of foundation. Piled raft foundations are better suited for tall chimneys to be constructed in loose or medium sand.

  5. Flexural Strengthening of RC Slabs with Prestressed CFRP Strips Using Different Anchorage Systems

    José Sena-Cruz

    2015-10-01

    Full Text Available Externally Bonded Reinforcement (EBR technique has been widely used for flexural strengthening of concrete structures by using carbon fiber-reinforced polymers (CFRP. EBR technique offers several structural advantages when the CFRP material is prestressed. This paper presents an experimental and numerical study on reinforced (RC slabs strengthened in flexure with prestressed CFRP strips as a structural strengthening system. The strips are applied as an externally bonded reinforcement (EBR and anchored with either a mechanical or a gradient anchorage. The former foresees metallic anchorage plates fixed to the concrete substrate, while the latter is based on an accelerated epoxy resin curing followed by a segment-wise prestress force decrease at the strip ends. Both anchorage systems, in combination with different CFRP strip geometries, were subjected to static loading tests. It could be demonstrated that the composite strip’s performance is better exploited when prestressing is used, with slightly higher overall load carrying capacities for mechanical anchorages than for the gradient anchorage. The performed investigations by means of a cross-section analysis supported the experimental observation that in case a mechanical anchorage is used, progressive strip debonding changes the fully bonded configuration to an unbonded end-anchored system. The inclusion of defined debonding criteria for both the anchorage zones and free length between the anchorage regions allowed to precisely capture the ultimate loading forces.

  6. LEITURA E SEUS SUPORTES: papel e digital

    Celso Leopoldo Pagnan

    2016-09-01

    Full Text Available Pesquisas pioneiras (Mangen; Walgermo; Brønnick, 2012 têm destacado o modo de ler textos curtos ou livros inteiros em dois suportes: digital e papel. Há uma suposição de que os jovens tendem a preferir a leitura digital ao suporte papel, porém pode não ser uma verdade absoluta, conforme atestam outras pesquisas (PewResearch Center, 2014. Com base em dados desses estudos, bem como na aplicação de testes em alunos do ensino médio, o presente trabalho parte do pressuposto de que o nível de percepção dos leitores pode ser relativamente diferente conforme o suporte utilizado. Para tanto, utilizamos como metodologia a aplicação de um teste de leitura em vinte e nove alunos, que leram textos curtos, com um ou dois parágrafos, em um suporte digital, tablet, e responderam a questões de compreensão sobre tais textos; repetindo o procedimento com outros textos em suporte papel. A hipótese era de que os alunos apresentassem modos diferentes de compreensão textual de acordo com o suporte utilizado. A análise dos dados coletados revelou um resultado sutilmente superior na compreensão dos textos impressos, porém insuficiente para ser generalizado como resultado conclusivo, não deixando, entretanto, de apontar caminhos significativos para a compreensão das práticas leitoras na escola.

  7. Digital radiography

    Precht, H; Gerke, O; Rosendahl, K

    2012-01-01

    BACKGROUND: New developments in processing of digital radiographs (DR), including multi-frequency processing (MFP), allow optimization of image quality and radiation dose. This is particularly promising in children as they are believed to be more sensitive to ionizing radiation than adults....... OBJECTIVE: To examine whether the use of MFP software reduces the radiation dose without compromising quality at DR of the femur in 5-year-old-equivalent anthropomorphic and technical phantoms. MATERIALS AND METHODS: A total of 110 images of an anthropomorphic phantom were imaged on a DR system (Canon DR...... with CXDI-50 C detector and MLT[S] software) and analyzed by three pediatric radiologists using Visual Grading Analysis. In addition, 3,500 images taken of a technical contrast-detail phantom (CDRAD 2.0) provide an objective image-quality assessment. RESULTS: Optimal image-quality was maintained at a dose...

  8. Fokus: Digital

    2014-01-01

    i det digitale domæne – udviklinger, der foregår hastigt og er gennemgribende, og som derfor kræver et nærmere blik på forholdet mellem kunsten og teknologien. Komponistens forståelse af sin metier udfordres – samtidig med at befæstede ideer om kunstværket møder modstand fra nye mediemæssige...... sammenhænge og fra forandrede distributionsformer. Dette betyder ændrede betingelser for både produktion og reception af kunstmusik og lydkunst. Med Digital tager vi udgangspunkt i fire komponisters meget forskellige bud på hvordan teknologien spiller en rolle i arbejdet. Juliana Hodkinson beskriver hvordan...

  9. Identificação e estimação de ruído em redes DSL: uma abordagem baseada em inteligência computacional

    FARIAS, Fabrício de Souza

    2012-01-01

    Este trabalho propõe a utilização de técnicas de inteligência computacional objetivando identificar e estimar a potencia de ruídos em redes Digital Subscriber Line ou Linhas do Assinante Digital (DSL) em tempo real. Uma metodologia baseada no Knowledge Discovery in Databases ou Descobrimento de Conhecimento em Bases de Dados (KDD) para detecção e estimação de ruídos em tempo real, foi utilizada. KDD é aplicado para selecionar, pré-processar e transformar os dados antes da etapa de aplicação d...

  10. Digital work in a digitally challenged organization

    Davison, R.M.; Ou, Carol

    Digitally literate employees are accustomed to having free access to digital media technologies. However, some organizations enact information technology (IT) governance structures that explicitly proscribe access to these technologies, resulting in considerable tension between employees and the

  11. The Intercomparison of 3D Radiation Codes (I3RC): Showcasing Mathematical and Computational Physics in a Critical Atmospheric Application

    Davis, A. B.; Cahalan, R. F.

    2001-05-01

    The Intercomparison of 3D Radiation Codes (I3RC) is an on-going initiative involving an international group of over 30 researchers engaged in the numerical modeling of three-dimensional radiative transfer as applied to clouds. Because of their strong variability and extreme opacity, clouds are indeed a major source of uncertainty in the Earth's local radiation budget (at GCM grid scales). Also 3D effects (at satellite pixel scales) invalidate the standard plane-parallel assumption made in the routine of cloud-property remote sensing at NASA and NOAA. Accordingly, the test-cases used in I3RC are based on inputs and outputs which relate to cloud effects in atmospheric heating rates and in real-world remote sensing geometries. The main objectives of I3RC are to (1) enable participants to improve their models, (2) publish results as a community, (3) archive source code, and (4) educate. We will survey the status of I3RC and its plans for the near future with a special emphasis on the mathematical models and computational approaches. We will also describe some of the prime applications of I3RC's efforts in climate models, cloud-resolving models, and remote-sensing observations of clouds, or that of the surface in their presence. In all these application areas, computational efficiency is the main concern and not accuracy. One of I3RC's main goals is to document the performance of as wide a variety as possible of three-dimensional radiative transfer models for a small but representative number of ``cases.'' However, it is dominated by modelers working at the level of linear transport theory (i.e., they solve the radiative transfer equation) and an overwhelming majority of these participants use slow-but-robust Monte Carlo techniques. This means that only a small portion of the efficiency vs. accuracy vs. flexibility domain is currently populated by I3RC participants. To balance this natural clustering the present authors have organized a systematic outreach towards

  12. Ductility Analysis of RC Beams Considering the Concrete Confinement Effect Produced by the Shear Reinforcement: a Numerical Approach

    Caio Gorla Nogueira

    Full Text Available Abstract In this paper, a simplified numerical approach to study the influence of the confinement effect provided by transversal reinforcement on the ductility behavior of RC beams in bending is proposed. A unidimensional FEM mechanical model coupled to the Mazars’ damage model to simulate concrete behavior was adopted to assess ductility curvatures at the ultimate limit state. The confinement effect was incorporated to the numerical model through a calibration process of the damage internal parameters, based on the Least Square Method and an analytical law proposed by Kent and Park (1971. Several numerical analyses were carried out considering different designs of RC beams according to a parametric study varying the neutral axis position, concrete compressive strength and the volumetric transversal reinforcement ratio. The obtained results showed the importance of the amount of transversal reinforcement on the ductility behavior, increasing the ductility factor even for the cases with inappropriate neutral axis position.

  13. USNA DIGITAL FORENSICS LAB

    Federal Laboratory Consortium — To enable Digital Forensics and Computer Security research and educational opportunities across majors and departments. Lab MissionEstablish and maintain a Digital...

  14. Effects of age and parity on mammary gland lesions and progenitor cells in the FVB/N-RC mice.

    Ahmed Raafat

    Full Text Available The FVB/N mouse strain is extensively used in the development of animal models for breast cancer research. Recently it has been reported that the aging FVB/N mice develop spontaneous mammary lesions and tumors accompanied with abnormalities in the pituitary glands. These observations have a great impact on the mouse models of human breast cancer. We have developed a population of inbred FVB/N mice (designated FVB/N-RC that have been genetically isolated for 20 years. To study the effects of age and parity on abnormalities of the mammary glands of FVB/N-RC mice, twenty-five nulliparous and multiparous (3-4 pregnancies females were euthanized at 16-22 months of age. Examination of the mammary glands did not reveal macroscopic evidence of mammary gland tumors in either aged-nulliparous or multiparous FVB/N-RC mice (0/25. However, histological analysis of the mammary glands showed rare focal nodules of squamous changes in 2 of the aged multiparous mice. Mammary gland hyperplasia was detected in 8% and 71% of the aged-nulliparous and aged-multiparous mice, respectively. Epithelial contents and serum levels of triiodothyronine were significantly higher in the experimental groups than the 14-wk-old control mice. Immuno-histochemical staining of the pituitary gland pars distalis showed no difference in prolactin staining between the control and the aged mice. Tissue transplant and dilution studies showed no effect of age and/or parity on the ability of putative progenitor cells present among the injected mammary cells to repopulate a cleared fat pad and develop a full mammary gland outgrowth. This FVB/N-RC mouse substrain is suitable to develop mouse models for breast cancer.

  15. Can We Teach Digital Natives Digital Literacy?

    Ng, Wan

    2012-01-01

    In recent years, there has been much debate about the concept of digital natives, in particular the differences between the digital natives' knowledge and adoption of digital technologies in informal versus formal educational contexts. This paper investigates the knowledge about educational technologies of a group of undergraduate students…

  16. Implementation of Highly-Flowable Strain Hardening Fiber Reinforced Concrete in New RC Beam-Column Joints

    Liao Wen-Cheng

    2018-01-01

    Full Text Available The purpose of New RC project was aimed to reduce the member sections and increase the available space of high rise buildings by using high strength concrete (f’c > 70 MPa and high strength rebars (fy > 685 MPa. Material consumptions and member section sizes can be further reduced owing to the upgrade of strength. However, the nature of brittleness of high strength may also cause early cover spalling and other ductility issues. Addition of steel fibers is an alternative as transverse reinforcement. Highly flowable strain hardening fiber reinforced concrete (HF-SHFRC has excellent workability in the fresh state and exhibits the strain-hardening and multiple cracking characteristics of high performance fiber reinforced cementitious composites (HPFRCC in their hardened state. The objective of this study is to investigate the feasibility of implementing HF-SHFRC in New RC building systems, particularly for beam-column joints as an alternative of transverse reinforcements. Four full-scale exterior beam-column joints, including two specimens with intensive transverse reinforcements and two specimens made of HF-SHFRC without any stirrup, are tested. Test results show that the HF-SHFRC specimens perform as well as specimens with intensive transverse reinforcements regarding failure mode, ductility, energy dissipation and crack width control. Integration of New RC building systems and HF-SHFRC can assuring construction qualities and further diminish labor work and give infrastructure longer service life, and eventually lower the life-cycle cost.

  17. Evaluation on effects of chloride-induced deterioration on mechanical properties of RC beams with cracking damage

    Matsuo, Toyofumi; Matsumura, Takuro; Otsuka, Taku

    2015-01-01

    This paper discusses the influence of chloride-induced deterioration on mechanical properties of aging reinforced concrete (RC) structures and the applicability of the material degradation model that takes reinforcing steel corrosion into consideration for finite element analysis. We conducted the corrosion tests under the simulated tidal environment and the flexural loading tests for the RC beams with cracking damage and initial defects. Then, the experimental results were numerically correlated to validate the devised modeling. The obtained results were summarized as follows: (a) The cracking damage in specimens caused a minor effect on the reinforcing steel corrosion in the case where the thickness of cover concrete was 40 mm and main rebars did not yield before chloride attack. On the other hand the maximum corrosion ratio of the deteriorated part became considerably larger than that of the non-cracking part in the specimens where the cover concrete were removed partially to simulate spalling by the severe corrosion. (b) Based on the test results, we derived the corrosion velocity of reinforcing steel corresponding to cracking damage degrees. (c) In FEM analyses, we showed that the above modeling can estimate the flexural strength of RC beams in consideration of the degradation in elongation performance of reinforcing steel due to corrosion. (author)

  18. Effect of the Fiber Type and Axial Stiffness of FRCM on the Flexural Strengthening of RC Beams

    Abdulla Jabr

    2017-01-01

    Full Text Available The use of externally-bonded fiber-reinforced polymer (FRP sheets has been successfully used in the repair and strengthening of both the shear and flexural capacities of reinforced concrete (RC beams, slabs and columns since the 1990s. However, the externally-bonded FRP reinforcements still present many disadvantages, such as poor performance in elevated temperature and fire, lack of permeability and strength degradation when exposed to ultraviolet radiation. To remedy such drawbacks, the fiber-/fabric-reinforced cementitious matrix (FRCM has been recently introduced. The FRCM system consists of a fiber mesh or grid embedded in a cementitious bonding material. The present research investigates the flexural strengthening of reinforced concrete (RC beams with FRCM. The experimental testing included eight large-scale concrete beams, 150 mm × 250 mm × 2400 mm, internally reinforced with steel bars and strengthened in flexure with FRCM. The investigated parameters were the internal steel reinforcement ratio and the FRCM systems. Two steel reinforcement ratios of 0.18 and 0.36 of the balanced reinforcement ratio, as well as three FRCM systems using glass, carbon and PBO fibers were investigated. Test results are presented in terms of load-deflection, load-strain and load-crack width relationships. The test results indicated that the PBO FRCM significantly increased the ultimate capacity of the strengthened RC beams with both low and moderate internal reinforcement ratios compared to the glass and carbon FRCM.

  19. Synthesis, Crystal Structure and Luminescent Property of Cd (II Complex with <em>N-Benzenesulphonyl-L>-leucine

    Xishi Tai

    2012-09-01

    Full Text Available A new trinuclear Cd (II complex [Cd3(L6(2,2-bipyridine3] [L =<em> Nem>-phenylsulfonyl-L>-leucinato] has been synthesized and characterized by elemental analysis, IR and X-ray single crystal diffraction analysis. The results show that the complex belongs to the orthorhombic, space group<em> Pem>212121 with<em> aem> = 16.877(3 Å, <em>b> em>= 22.875(5 Å, <em>c em>= 29.495(6 Å, <em>α> em>= <emem>= <emem>= 90°, <em>V> em>= 11387(4 Å3, <em>Z> em>= 4, <em>Dc>= 1.416 μg·m−3, <emem>= 0.737 mm−1, <em>F> em>(000 = 4992, and final <em>R>1 = 0.0390, <em>ωR>2 = 0.0989. The complex comprises two seven-coordinated Cd (II atoms, with a N2O5 distorted pengonal bipyramidal coordination environment and a six-coordinated Cd (II atom, with a N2O4 distorted octahedral coordination environment. The molecules form one dimensional chain structure by the interaction of bridged carboxylato groups, hydrogen bonds and p-p interaction of 2,2-bipyridine. The luminescent properties of the Cd (II complex and <em>N-Benzenesulphonyl-L>-leucine in solid and in CH3OH solution also have been investigated.

  20. Digital produktion

    Bogen sætter fokus på digital produktion, som er en stærk læringsform, der faciliterer elevernes læreprocesser og kvalificerer elevernes faglige læringsresultater. Det sker når lærerne udarbejder didaktiske rammedesign, hvor eleverne arbejder selvstændigt inden for dette rammedesign, og hvor mål og...... procesevaluering stilladserer elevernes faglige proces. I digitale produktionsprocesser arbejder eleverne iterativt, de udvikler ejerskab til produktionen og fastholder selv deres læreprocesser. It’s multimodalitet, elevernes kollaborative tilgange, videndeling mellem eleverne og elevernes uformelle lege- og...... elevernes digitale produktion er lærernes didaktiske rammesætning og stilladserende tilgange. Her lægger lærerne op til, at eleverne som didaktiske designere i relation til rammesætningen skal organisere og planlægge deres læreprocesser, inddrages i målsætning, evaluering og valg af digitale ressourcer...

  1. Digital dannelse

    Bundsgaard, Jeppe

    2012-01-01

    I al vores iver efter at få presset nogle flere digitale dimser ind i skolen, er vi i fare for at glemme hvad det er vi skal med disse dimser. Der er store forventninger til at de kan gøre det lettere at være lærer (og dermed billigere), og det kan det måske. Men der er jo også et dannelsesspørgs......I al vores iver efter at få presset nogle flere digitale dimser ind i skolen, er vi i fare for at glemme hvad det er vi skal med disse dimser. Der er store forventninger til at de kan gøre det lettere at være lærer (og dermed billigere), og det kan det måske. Men der er jo også et...... dannelsesspørgsmål knyttet til it. Hvad er egentlig digital dannelse? Og hvad betyder det for danskfaget?...

  2. Digital forensics digital evidence in criminal investigations

    Marshall, Angus McKenzie

    2009-01-01

    The vast majority of modern criminal investigations involve some element of digital evidence, from mobile phones, computers, CCTV and other devices. Digital Forensics: Digital Evidence in Criminal Investigations provides the reader with a better understanding of how digital evidence complements "traditional" scientific evidence and examines how it can be used more effectively and efficiently in a range of investigations. Taking a new approach to the topic, this book presents digital evidence as an adjunct to other types of evidence and discusses how it can be deployed effectively in s

  3. Estimation of the behavior factor of existing RC-MRF buildings

    Vona, Marco; Mastroberti, Monica

    2018-01-01

    In recent years, several research groups have studied a new generation of analysis methods for seismic response assessment of existing buildings. Nevertheless, many important developments are still needed in order to define more reliable and effective assessment procedures. Moreover, regarding existing buildings, it should be highlighted that due to the low knowledge level, the linear elastic analysis is the only analysis method allowed. The same codes (such as NTC2008, EC8) consider the linear dynamic analysis with behavior factor as the reference method for the evaluation of seismic demand. This type of analysis is based on a linear-elastic structural model subject to a design spectrum, obtained by reducing the elastic spectrum through a behavior factor. The behavior factor (reduction factor or q factor in some codes) is used to reduce the elastic spectrum ordinate or the forces obtained from a linear analysis in order to take into account the non-linear structural capacities. The behavior factors should be defined based on several parameters that influence the seismic nonlinear capacity, such as mechanical materials characteristics, structural system, irregularity and design procedures. In practical applications, there is still an evident lack of detailed rules and accurate behavior factor values adequate for existing buildings. In this work, some investigations of the seismic capacity of the main existing RC-MRF building types have been carried out. In order to make a correct evaluation of the seismic force demand, actual behavior factor values coherent with force based seismic safety assessment procedure have been proposed and compared with the values reported in the Italian seismic code, NTC08.

  4. LaRC Modeling of Ozone Formation in San Antonio, Texas

    Guo, F.; Griffin, R. J.; Bui, A.; Schulze, B.; Wallace, H. W., IV; Flynn, J. H., III; Erickson, M.; Kotsakis, A.; Alvarez, S. L.; Usenko, S.; Sheesley, R. J.; Yoon, S.

    2017-12-01

    Ozone (O3) is one of the most important trace species within the troposphere and results from photochemistry involving emissions from a complex array of sources. Ground-level O3 is detrimental to ecosystems and causes a variety of human health problems including respiratory irritation, asthma and reduction in lung capacity. However, the O3 Design Value in San Antonio, Texas, was in violation of the federal threshold set by the EPA (70 ppb, 8-hr max) based on the average for the most recent three-year period (2014-2016). To understand the sources of high O3 concentrations in this nonattainment area, we assembled and deployed a mobile air quality laboratory and operated it in two locations in the southeast (Traveler's World RV Park) and northwest (University of Texas at San Antonio) of downtown San Antonio during summer 2017 to measure O3 and its precursors, including total nitrogen oxides (NOx) and volatile organic compounds (VOCs). Additional measurements included temperature, relative humidity, pressure, solar radiation, wind speed, wind direction, total reactive nitrogen (NOy), carbon monoxide (CO), and aerosol composition and concentration. We will use the campaign data and the NASA Langley Research Center (LaRC) Zero-Dimensional Box Model (Crawford et al., 1999; Olson et al., 2006) to calculate O3 production rate, NOx and hydroxyl radical chain length, and NOx versus VOCs sensitivity at different times of a day with different photochemical and meteorological conditions. A key to our understanding is to combine model results with measurements of precursor gases, particle chemistry and particle size to support the identification of O3 sources, its major formation pathways, and how the ozone production efficiency (OPE) depends on various factors. The resulting understanding of the causes of high O3 concentrations in the San Antonio area will provide insight into future air quality protection.

  5. Study of RC method on reclamation project in the uranium mine (Joint research)

    Ishizaka, Kaoru; Tanaka, Masaru; Suzuki, Kazuhiko; Tokizawa, Takayuki; Sato, Kazuhiko; Koga, Osamu

    2008-12-01

    To obtain public understanding on the uranium mining sites reclamation at Ningyo-toge Environmental Engineering Center, it is necessary to conduct appropriate Risk Communication (RC). In this study, to discuss the appropriate Risk communication method on the uranium mining sites reclamation, comparative investigation of risk communication cases which concern the siting of solid waste management facilities and nuclear facilities, and questionnaire survey on the risk perception of landfill were conducted. As a result of comparative investigation, information disclosure and the information supplement are important factor to obtain public trust on the siting plan and developer (government and company). However, it is necessary not only to offer information but also to foster information literacy at the same time. In the cases of best practice on consensus-building toward siting of facilities, there was suggestion that is importance to set up the public participation opportunity at an early planning stage to avoid adversary relationship between stakeholders. As assumption of the public participation, it is necessary the safety assurance of the siting plan and regional development plan cover a long period. As a result of questionnaire survey. It was shown that the almost people worried about health and the environmental impact of radioactive waste; moreover, there are a lot of ratios of the peoples who felt a dangerous and scary sensuously. Public trust on government was very low, Over 60 percent does not trust 'countermeasures at the accident' and nearly 70 percent does not trust the information disclosure at the accident'. 'Questions concern on public trust: countermeasures at the accident, information disclosure at the accident, environmental standard, and environmental technology show significant correlation with risk perception of landfill site. (author)

  6. Experimental investigation on full scale RC beam-column joint of NPP structures

    Thandavamoorthy, T.S.; Lakshmanan, N.; Reddy, G.R.; Kushwaha, H.S.

    2003-01-01

    The Nuclear Power Plant (NPP) structures in India are constructed using reinforced concrete. The beam-column joint in these structures are critical sub-assemblages because they ensure continuity of a structure and transfer forces from one element to another. Under seismic excitation, the beam-column joint region is subjected to horizontal and vertical shear forces whose magnitudes are typically many times higher than those within the adjacent beams and columns. In view of the increased incidence of seismicity in the country, the safety of these structures against earthquake loading assumes greater significance. There is a growing need to look into the seismic safety aspect of existing RC frame type structures in NPPs, which have been designed as per codes prevalent at the time of their construction. Seismic performance of such joints has not been studied extensively in India. Therefore experimental testing of full scale joint identical to those available in the existing NPP structures, was carried out to study its behaviour and evaluate its capacity. The size of the beam of the joint was 2000 mm x 610 mm x 915 mm and column 2915 mm x 610 mm x 915 mm. The percentage reinforcement of the beam was 4.95 and column 1.5. Such full scale and heavily reinforced concrete joint was cast successfully in the laboratory and tested under monotonic loading. The paper presents a complete description of the experimental testing, observations made during testing as for cracking, deflection and rotation of joint, discussion of results obtained, etc. Conclusions drawn from the investigation are also presented. (author)

  7. LESÕES ASSOCIADAS À LAMINITE SUBCLÍNICA E EXAME RADIOGRÁFICO DIGITAL EM VACAS DA RAÇA HOLANDÊS NO PERÍODO TRANSICIONAL

    Barbosa,Antonio Amaral; Ferreira,Charles Martins; Corrêa,Márcio Nunes; Schwegler,Elizabeth; Raimondo,Raquel Fraga e Silva; Pino,Francisco Augusto Burkert Del

    2016-01-01

    Resumo A laminite subclínica é responsável por grandes prejuízos na pecuária leiteira, sendo o seu diagnóstico de grande relevância para evitar reflexos negativos na produção. Portanto, o objetivo deste trabalho foi relacionar lesões associadas à laminite subclínica no período de transição de vacas da raça Holandês com a ocorrência ou não de sinais radiográficos vinculados a essa enfermidade. As vacas foram avaliadas durante o período de transição e divididas em dois grupos (com e sem sinais ...

  8. Delineation of watershed in a mountainous area using different digital elevation modelsDelimitação de bacia hidrográfica em região montanhosa a partir de diferentes modelos digitais de elevação

    Roberto Avelino Cecílio

    2013-10-01

    Full Text Available The precise delineation of watersheds is essential to studies related to environmental and hydrologic modeling. Such delineation is performed automatically in GIS softwares using algorithms that identify the watershed from grid representation of the terrain, the digital elevation model (DEM. This study evaluated the automatic delineation of a watershed located in the southern mountainous region of Espirito Santo (Brazil using six different DEMs. Three MDEs were obtained by radar images (SRTM and its refinements. Other three MDEs were obtained by process spatial interpolation of topographic data using different interpolators. It was found that the MDE obtained by the interpolation of topographic data using Top To Raster interpolator, (taking mapped hydrography as support promoted the best representation of the watershed topography for the purpose of its delimitation. A correta delimitação dos divisores de água da uma bacia hidrográfica é de grande importância para estudos ligados à modelagem hidrológica e ambiental. Tal procedimento é realizado de forma automática em aplicativos computacionais de Sistemas de Informaç��es Geográficas, por meio de algoritmos que identificam os divisores de águas a partir de uma representação matricial da topografia do terreno, denominada Modelo Digital de Elevação (MDE. O presente trabalho avaliou a delimitação automática de uma bacia hidrográfica situada em região montanhosa do Sul do Estado do Espírito Santo (Brasil feita a partir de seis diferentes MDEs: três MDEs originários de imagem de radar (SRTM e seus refinamentos, além de três MDEs originários de processos de interpolação espacial de curvas de nível por meio de diferentes formas de interpolação. Verificou-se que o MDE gerado a partir das curvas de nível e da hidrografia mapeada utilizando o interpolador Topo To Raster apresentou o melhor desempenho de representação do relevo da bacia para fins de delimitação da

  9. Digital platforms as enablers for digital transformation

    Hossain, Mokter; Lassen, Astrid Heidemann

    transformation is crucial. This study aims at exploring how organizations are driven towards transformation in various ways to embrace digital platforms for ideas, technologies, and knowledge. It shows the opportunities and challenges digital platforms bring in organizations. It also highlights underlying......Digital platforms offer new ways for organizations to collaborate with the external environment for ideas, technologies, and knowledge. They provide new possibilities and competence but they also bring new challenges for organizations. Understanding the role of these platforms in digital...... mechanisms and potential outcomes of various digital platforms. The contribution of the submission is valuable for scholars to understand and further explore this area. It provides insight for practitioners to capture value through digital platforms and accelerate the pace of organizations’ digital...

  10. IL-17A, IL-17RC polymorphisms and IL17 plasma levels in Tunisian patients with rheumatoid arthritis

    Chahbi, Mayssa; Haouami, Youssra; Sfar, Imen; Abdelmoula, Leila; Ben Abdallah, Taieb; Gorgi, Yousr

    2018-01-01

    Background Interleukin-17 (IL-17), a cytokine mainly secreted by Th17 cells, seems to play a significant role in the pathogenesis of rheumatoid arthritis (RA). Functional genetic polymorphisms in IL-17 and its receptor genes can influence either qualitatively or quantitatively their functions. Therefore, we aimed to study the impact of IL17-A and IL17RC polymorphisms on plasma level of IL-17 and RA susceptibility and severity. Methods In this context, IL-17A*rs2275913 and IL-17RC*rs708567 polymorphisms were investigated together with the quantification of IL17 plasma level in 115 RA patients and 91 healthy control subjects matched in age, sex and ethnic origin. Results There were no statistically significant associations between IL-17A and IL-17RC studied polymorphisms and RA susceptibility. In contrast, IL-17A plasma levels were significantly higher in patients (55.07 pg/ml) comparatively to controls (4.75 pg/ml), p<10E-12. A ROC curve was used to evaluate the performance of plasma IL-17 in detecting RA. Given 100% specificity, the highest sensitivity of plasma IL-17A was 61.7% at a cut-off value of 18.25 pg/ml; p < 10E-21, CI = [0.849–0.939]. Analytic results showed that the IgM-rheumatoid factor and anti-CCP antibodies were significantly less frequent in patients with the IL-17RC*A/A genotype than those carrying *G/G and *G/A genotypes; p = 0.013 and p = 0.015, respectively. Otherwise, IL-17 plasma levels’ analysis showed a significant association with the activity of RA (DAS28≥5.1 = 74.71 pg/ml vs. DAS28<5.1 = 11.96 pg/ml), p<10E-6. Conclusion IL-17A*rs2275913 (G/A) and IL-17RC*rs708567 (G/A) polymorphisms did not seem to influence RA susceptibility in Tunisian population. This result agrees with those reported previously. Plasma IL-17A level seems to be predictive of severe RA occurrence. PMID:29584788

  11. Educational strategies to strengthen digital competencies in Colombian aeronautics instructors = Estratégias educacionais para fortalecer competências digitais em instrutores da aeronáutica colombiana

    Suárez Robledo, Carlos Alberto

    2015-01-01

    Full Text Available Esta pesquisa tem como objetivo estabelecer estratégias educacionais que contribuam para o fortalecimento de competências, no meio digital, de professores do Centro de Estudos Aeronáuticos da Aeronáutica Civil da Colômbia e atividades para promover cursos de aprendizagem combinada. Este estudo utilizou um método quantitativo e um não experimental, descritivo, para analisar o uso de Tecnologias de Comunicação e Informação no Centro de Estudos Aeronáuticos. Os resultados desse estudo indicam a necessidade de políticas específicas para implementação de tecnologias e uma plataforma virtual para a administração de cursos, para reforçar os recursos humanos e técnicos para cursos de aprendizagem combinada e o desenvolvimento de competências digitais

  12. O Mercado Único Digital Europeu

    Fernanda Ferreira Dias

    2016-11-01

    Full Text Available A Internet e as tecnologias digitais estão a transformar o nosso mundo a todos os níveis e invadem todos os aspetos da nossa vida. Na União Europeia, quando o Mercado Único Digital funcionar em pleno, oferecerá novas oportunidades para dinamizar a economia; é atualmente uma das áreas mais importantes e que mais desafios apresenta em termos de progresso e crescimento. O Mercado Único Digital Europeu exige um quadro jurídico que permita o desenvolvimento dos vários aspetos que abrange, e que vão desde o comércio eletrónico, à administração pública em linha, infraestruturas de telecomunicações, fiscalidade, direitos de autor, conectividade dos dados, segurança ou privacidade dos dados pessoais. A “Estratégia para o Mercado Único Digital na Europa” enquadra esta ação. O Mercado Único Digital está em curso e tem por objetivo eliminar as barreiras regulamentares existentes nos mercados nacionais dos 28 Estados-membros da União Europeia para um único mercado europeu. Este artigo revela os passos que a União Europeia e os seus Estados-membros estão a dar para a concretização deste objetivo e tem obviamente o enfoque na participação de Portugal nesse contexto, no ano em que se realiza em Lisboa, pela primeira vez, a Web Summit – o maior evento de empreendedorismo tecnológico ao nível europeu. | "The European Digital Single Market". The Internet and digital technologies are transforming our world at all levels and invade all aspects of our lives. When the European Digital Single Market will be fully operational, it will offer new opportunities to boost the European Union’s economy; it is currently one of the most important and challenging areas in terms of progress and growth. The European Digital Single Market requires a legal framework for the development of various aspects ranging from e-commerce to e-government, telecommunications infrastructure, taxation, copyright, data connectivity, security or privacy of

  13. APROPRIAÇÕES DAS TECNOLOGIAS DIGITAIS E EM REDE POR PROFESSORES: experiências nas escolas estaduais do Ceará, Brasil. APPROPRIATIONS OF DIGITAL AND NETWORK TECHNOLOGIES BY TEACHERS: experiences in the public schools of Ceará, Brazil

    Adriana Rocha Bruno

    2013-01-01

    Full Text Available O fortalecimento e implantação das tecnologias da informação e comunicação (TIC é hoje um dos grandes investimentos públicos da Secretaria de Educação do Estado do Ceará. Diante de um cenário social mediado pela cultura digital, cibercultural, que exige dos profissionais do magistério novos olhares sobre seu fazer pedagógico e principalmente o devido conhecimento na utilização de recursos digitais e em rede, infelizmente ainda há em nosso país um significativo contingente de profissionais à margem desse processo. O presente artigo, fruto de uma pesquisa realizada em 2012, investigou a situação do professorado e da gestão escolar das escolas públicas da rede estadual de Fortaleza, Ceará, Brasil, em relação ao conhecimento que possuem sobre TIC e sobre a utilização dessas tecnologias, a partir de uma perspectiva de mudança de paradigma educacional. Essa investigação foi realizada em duas escolas da rede pública estadual do Ceará, as maiores em número de alunos da capital cearense, e com resultados diferentes no Sistema Permanente de Avaliação da Educação do Ceará (SPAECE. Tal pesquisa se desenvolveu por meio de dois movimentos - apresentados neste texto: 1 produção e 2 proposição. No primeiro são oferecidas pistas sobre o apoio dado pela gestão escolar à inserção das TIC na rotina escolar, à habilidade técnica dos profissionais da escola no manuseio desses equipamentos e do quanto e de que forma as TIC são usadas como recursos pedagógicos. No segundo movimento, destacam-se caminhos e proposições de ações integradas, que provoquem um redimensionamento da gestão escolar e do fazer pedagógico na transformação dos processos de ensino e de aprendizagem. The strengthening and implementation of information and communication technology (ICT is today one of the major investments of the Secretariat of Public Education of the State of Ceará, Brazil. Facing a social setting mediated by digital

  14. Sociální vztahy a postoje v ženském ragbyovém týmu RC Tatra Smíchov

    Kadavá, Tereza

    2014-01-01

    Title: Social Relationships and Attitudes in Women's RC Tatra Smichov Rugby Team Objectives: The main objective of this thesis is to analyze social relations and attitudes in the women's RC Tatra Smichov rugby team and to create the profiles of the players. The analysis should help the new coach to get to know the players well, focusing mainly on their career, ambition, motivation, and feelings during trainings and matches. At the same time, it should shed light on how they perceive themselve...

  15. Experimental investigations on a cascaded steam-/organic-Rankine-cycle (RC/ORC) system for waste heat recovery (WHR) from diesel engine

    Yu, Guopeng; Shu, Gequn; Tian, Hua; Huo, Yongzhan; Zhu, Weijie

    2016-01-01

    Highlights: • A novel cascaded RC/ORC system was constructed for WHR of a heavy-duty diesel engine. • The RC/ORC system was experimentally investigated under engine operating conditions. • Good system stability and satisfying thermal states of working fluids were observed. • The power increment can reach up to 5.6% by equipping the novel cascaded RC/ORC system. - Abstract: A novel cascaded RC/ORC system that comprises a steam Rankine cycle as the high-temperature loop (H-RC) and an organic Rankine cycle as the low-temperature loop (L-ORC) was constructed and experimentally investigated to recover waste heat from exhaust gas of a heavy-duty diesel engine (DE). By monitoring key parameters of the RC/ORC system against time, good system stability and satisfying thermal states of working fluids were observed. Impacts that the engine operations have on this proposed waste-heat-recovery (WHR) system were studied, indicating that waste heat recovered from the gas increases gradually and greatly as the engine load increases, yet decreases slightly as the speed grows. At full loads at speeds lower than 2050 rpm, up to 101.5 kW of waste heat can be abstracted from the gas source, showing a promising heat transfer potential. Besides, observations of key exergy states as well as estimations and comparisons of potential output power were carried out stepwise. Results indicated that up to 12.7 kW of output power could be obtained by the novel RC/ORC system under practical estimations. Comparing to the basic diesel engine, the power increment reaches up to 5.6% by equipping the cascaded RC/ORC system.

  16. H. Sapiens Digital: From Digital Immigrants and Digital Natives to Digital Wisdom

    Prensky, Marc

    2009-01-01

    As we move further into the 21st century, the digital native/digital immigrant paradigm created by Marc Prensky in 2001 is becoming less relevant. In this article, Prensky suggests that we should focus instead on the development of what he calls "digital wisdom." Arguing that digital technology can make us not just smarter but truly wiser, Prensky…

  17. Dual beam vidicon digitizer

    Evans, T.L.

    1976-01-01

    A vidicon waveform digitizer which can simultaneously digitize two independent signals has been developed. Either transient or repetitive waveforms can be digitized with this system. A dual beam oscilloscope is used as the signal input device. The light from the oscilloscope traces is optically coupled to a television camera, where the signals are temporarily stored prior to digitizing

  18. Inclusão digital via acessibilidade web | Digital inclusion via web accessibility

    Cesar Augusto Cusin

    2009-03-01

    Full Text Available Resumo A natureza atual da web, que destaca a participação colaborativa dos usuários em diversos ambientes informacionais digitais, conduz ao desenvolvimento de diretrizes que enfocam a arquitetura da informação digital inclusiva para diferentes públicos nas mais diversas ambiências informacionais. A pesquisa propõe e objetiva um ambiente informacional digital inclusivo, visando apontar os elementos de acessibilidade que permitam a promoção da inclusão informacional digital, de forma a destacar os referenciais da Arquitetura da Informação Digital, de recomendações internacionais, com o olhar da Ciência da Informação e das novas tecnologias de informação e comunicação (TIC. Palavras-chave inclusão digital; web; acessibilidade; ciência da informação; arquitetura da informação. Abstract The current nature of the web, which highlights the collaborative participation of users in various digital informational environments, leads to the development of guidelines that focus on the digital inclusive information architecture for different audiences in diverse informational environments. The study proposes an inclusive digital information environment, aiming to establish the elements of accessibility that  enable the promotion of digital inclusion information in order to highlight the references of digital information architecture, the international recommendations, with the perspective of Information Science and the new information and communication technologies (ICT. Keywords digital inclusion; web; accessibility; information science; information architecture.

  19. Enabling Digital Literacy

    Ryberg, Thomas; Georgsen, Marianne

    2010-01-01

    There are some tensions between high-level policy definitions of “digital literacy” and actual teaching practice. We need to find workable definitions of digital literacy; obtain a better understanding of what digital literacy might look like in practice; and identify pedagogical approaches, which...... support teachers in designing digital literacy learning. We suggest that frameworks such as Problem Based Learning (PBL) are approaches that enable digital literacy learning because they provide good settings for engaging with digital literacy. We illustrate this through analysis of a case. Furthermore......, these operate on a meso-level mediating between high-level concepts of digital literacy and classroom practice....

  20. Progress in digital radiography

    Cappelle, A.

    2016-01-01

    Because of its practical aspect digital radiography is more and more used in the industrial sector. There are 2 kinds of digital radiography. First, the 'computed radiography' that uses a photon-stimulated screen, and after radiation exposure this screen must be read by an analyser to get a digit image. The second type is the 'direct radiography' that allows one to get a digit radiograph of the object directly. Digital radiography uses the same radioactive nuclides as radiography with silver films: cobalt, iridium or selenium. The spatial resolution of digital radiography is less good than with classical silver film radiography but digital radiography offers a better visual contrast. (A.C.)